WorldWideScience

Sample records for ldrd feasibility study

  1. Colombian cracker feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-06

    Colombia`s Promotora de Olefinas Aromaticos del Caribe will soon select a consulting group to develop a $500,000 feasibility study for an olefins plant at Mamonal, Cartagena. The project will involve investments of $1.2 billion and will be based on natural gas from the Cusiana field, being developed by Ecopetrol and BP. Several groups are competing for the study; SRI International, Japan Consulting Institute, Muse, Stancil, Chem Systems, and KBC Advanced Technologies.

  2. Feasibility studies and technological innovation

    DEFF Research Database (Denmark)

    2004-01-01

    The chapter offers a tool to conduct feasibility studies and focuses on how to make feasibility studies in a situation with environmental concerns, in which technological innovation and institutional chnages are among the objectives.......The chapter offers a tool to conduct feasibility studies and focuses on how to make feasibility studies in a situation with environmental concerns, in which technological innovation and institutional chnages are among the objectives....

  3. Feasibility studies and technological innovation

    DEFF Research Database (Denmark)

    2004-01-01

    The chapter offers a tool to conduct feasibility studies and focuses on how to make feasibility studies in a situation with environmental concerns, in which technological innovation and institutional chnages are among the objectives.......The chapter offers a tool to conduct feasibility studies and focuses on how to make feasibility studies in a situation with environmental concerns, in which technological innovation and institutional chnages are among the objectives....

  4. 2007 LDRD ANNUAL REPORT

    Energy Technology Data Exchange (ETDEWEB)

    French, T

    2008-12-16

    I am pleased to present the fiscal year 2007 Laboratory Directed Research and Development (LDRD) annual report. This represents the first year that SRNL has been eligible for LDRD participation and our results to date demonstrate we are off to an excellent start. SRNL became a National Laboratory in 2004, and was designated the 'Corporate Laboratory' for the DOE Office of Environmental Management (EM) in 2006. As you will see, we have made great progress since these designations. The LDRD program is one of the tools SRNL is using to enable achievement of our strategic goals for the DOE. The LDRD program allows the laboratory to blend a strong basic science component into our applied technical portfolio. This blending of science with applied technology provides opportunities for our scientists to strengthen our capabilities and delivery. The LDRD program is vital to help SRNL attract and retain leading scientists and engineers who will help build SRNL's future and achieve DOE mission objectives. This program has stimulated our research staff creativity, while realizing benefits from their participation. This investment will yield long term dividends to the DOE in its Environmental Management, Energy, and National Security missions.

  5. PWR decontamination feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Silliman, P.L.

    1978-12-18

    The decontamination work which has been accomplished is reviewed and it is concluded that it is worthwhile to investigate further four methods for decontamination for future demonstration. These are: dilute chemical; single stage strong chemical; redox processes; and redox/chemical in combination. Laboratory work is recommended to define the agents and processes for demonstration and to determine the effect of the solvents on PWR materials. The feasibility of Indian Point 1 for decontamination demonstrations is discussed, and it is shown that the system components of Indian Point 1 are well suited for use in demonstrations.

  6. Tribal Utility Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Engel, R. A.; Zoellick, J. J.

    2007-06-30

    The Schatz Energy Research Center (SERC) assisted the Yurok Tribe in investigating the feasibility of creating a permanent energy services program for the Tribe. The original purpose of the DOE grant that funded this project was to determine the feasibility of creating a full-blown Yurok Tribal electric utility to buy and sell electric power and own and maintain all electric power infrastructure on the Reservation. The original project consultant found this opportunity to be infeasible for the Tribe. When SERC took over as project consultant, we took a different approach. We explored opportunities for the Tribe to develop its own renewable energy resources for use on the Reservation and/or off-Reservation sales as a means of generating revenue for the Tribe. We also looked at ways the Tribe can provide energy services to its members and how to fund such efforts. We identified opportunities for the development of renewable energy resources and energy services on the Yurok Reservation that fall into five basic categories: • Demand-side management – This refers to efforts to reduce energy use through energy efficiency and conservation measures. • Off-grid, facility and household scale renewable energy systems – These systems can provide electricity to individual homes and Tribal facilities in areas of the Reservation that do not currently have access to the electric utility grid. • Village scale, micro-grid renewable energy systems - These are larger scale systems that can provide electricity to interconnected groups of homes and Tribal facilities in areas of the Reservation that do not have access to the conventional electric grid. This will require the development of miniature electric grids to serve these interconnected facilities. • Medium to large scale renewable energy development for sale to the grid – In areas where viable renewable energy resources exist and there is access to the conventional electric utility grid, these resources can be

  7. Flathead Renewable Energy Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Belvin Pete: Ed McCarthy; Krista Gordon; Chris Bergen; Rhett Good

    2006-10-03

    The study shall assess the feasibility of a commercial wind facility on lands selected and owned by the Salish and Kootenai Tribes and shall examine the potential for the development of solar and biomass resources located on Tribal Lands.

  8. Conducting pilot and feasibility studies.

    Science.gov (United States)

    Cope, Diane G

    2015-03-01

    Planning a well-designed research study can be tedious and laborious work. However, this process is critical and ultimately can produce valid, reliable study findings. Designing a large-scale randomized, controlled trial (RCT)-the gold standard in quantitative research-can be even more challenging. Even the most well-planned study potentially can result in issues with research procedures and design, such as recruitment, retention, or methodology. One strategy that may facilitate sound study design is the completion of a pilot or feasibility study prior to the initiation of a larger-scale trial. This article will discuss pilot and feasibility studies, their advantages and disadvantages, and implications for oncology nursing research. 
.

  9. A Digital Library Feasibility Study

    Directory of Open Access Journals (Sweden)

    C. Henshaw

    2010-08-01

    Full Text Available This paper presents the outcomes of a Digital Library Feasibility Study at the Wellcome Library. In particular, the study looked at the interoperability and integration between systems, including a back-end digital asset management (DAM system with attached storage, a front-end delivery system, the use of METS to manage delivery of content, a full-text database with search engine, and a workflow management system.

  10. 7 CFR 4279.150 - Feasibility studies.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Feasibility studies. 4279.150 Section 4279.150... § 4279.150 Feasibility studies. A feasibility study by a qualified independent consultant may be required... affect the borrower's operations. An acceptable feasibility study should include, but not be limited...

  11. Manzanita Wind Energy Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Trisha Frank

    2004-09-30

    The Manzanita Indian Reservation is located in southeastern San Diego County, California. The Tribe has long recognized that the Reservation has an abundant wind resource that could be commercially utilized to its benefit. Manzanita has explored the wind resource potential on tribal land and developed a business plan by means of this wind energy feasibility project, which enables Manzanita to make informed decisions when considering the benefits and risks of encouraging large-scale wind power development on their lands. Technical consultant to the project has been SeaWest Consulting, LLC, an established wind power consulting company. The technical scope of the project covered the full range of feasibility assessment activities from site selection through completion of a business plan for implementation. The primary objectives of this feasibility study were to: (1) document the quality and suitability of the Manzanita Reservation as a site for installation and long-term operation of a commercially viable utility-scale wind power project; and, (2) develop a comprehensive and financeable business plan.

  12. IP storage : a performance and security study, LDRD 04-1021.

    Energy Technology Data Exchange (ETDEWEB)

    Van Randwyk, Jamie A.; Bierbaum, Neal Robert; Chen, Helen Y.; Bielecki, Frank T.

    2005-02-01

    Effective, high-performance, networked file systems and storage is needed to solve I/O bottlenecks between large compute platforms. Frequently, parallel techniques such as PFTP, are employed to overcome the adverse effect of TCP's congestion avoidance algorithm in order to achieve reasonable aggregate throughput. These techniques can suffer from end-system bottlenecks due to the protocol processing overhead and memory copies involved in moving large amounts of data during I/O. Moreover, transferring data using PFTP requires manual operation, lacking the transparency to allow for interactive visualization and computational steering of large-scale simulations from distributed locations. This paper evaluates the emerging Internet SCSI (iSCSI) protocol [2] as the file/data transport in order that remote clients can transparently access data through a distributed global file system available to local clients. We started our work characterizing the performance behavior of iSCSI in Local Area Networks (LANs). We then proceeded to study the effect of propagation delay on throughput using remote iSCSI storage and explored optimization techniques to mitigate the adverse effects of long delay in high-bandwidth Wide Area Networks (WANs). Lastly, we evaluated iSCSI in a Storage Area Network (SAN) for a Global Parallel Filesystem. We conducted our benchmark based on typical usage model of large-scale scientific applications at Sandia. We demonstrated the benefit of high-performance parallel VO to scientific applications at the IEEE 2004 Supercomputing Conference, using experiences and knowledge gained from this study.

  13. LDRD FY2004 Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    Kotta, P. R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kline, K. M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2005-02-28

    The Laboratory Directed Research and Development (LDRD) Program is our primary means for pursuing innovative, long-term, high-risk, and potentially high-payoff research that supports the missions of the Laboratory, the Department of Energy, and the National Nuclear Security Administration in national security, homeland security, energy security, environmental management, bioscience and healthcare technology, and breakthroughs in fundamental science and technology. The LDRD Program was authorized by Congress in 1991 and is administered by the Laboratory Science and Technology Office. The accomplishments described in this Annual Report demonstrate how the LDRD portfolio is strongly aligned with these missions and contributes to the Laboratory’s success in meeting its goals. The LDRD budget of $69.8 million for FY2004 sponsored 220 projects. These projects were selected through an extensive peer-review process to ensure the highest scientific and technical quality and mission relevance. Each year, the number of meritorious proposals far exceeds the funding available, making the selection a challenging one indeed. Our ongoing investments in LDRD have reaped long-term rewards for the Laboratory and the Nation. Many Laboratory programs trace their roots to research thrusts that began several years ago under LDRD sponsorship. In addition, many LDRD projects contribute to more than one mission area, leveraging the Laboratory’s multidisciplinary team approach to science and technology. Safeguarding the Nation from terrorist activity and the proliferation of weapons of mass destruction will be an enduring mission of this Laboratory, for which LDRD will continue to play a vital role. The LDRD Program is a success story. Our projects continue to win national recognition for excellence through prestigious awards, papers published in peer-reviewed journals, and patents granted. With its reputation for sponsoring innovative projects, the LDRD Program is also a major vehicle

  14. Final LDRD report :

    Energy Technology Data Exchange (ETDEWEB)

    Clark, Blythe G.; Rajasekhara, Shreyas; Enos, David George; Dingreville, Remi Philippe Michel; Doyle, Barney Lee; Hattar, Khalid Mikhiel; Weiner, Ruth F.

    2013-09-01

    We present the results of a three-year LDRD project focused on understanding microstructural evolution and related property changes in Zr-based nuclear cladding materials towards the development of high fidelity predictive simulations for long term dry storage. Experiments and modeling efforts have focused on the effects of hydride formation and accumulation of irradiation defects. Key results include: determination of the influence of composition and defect structures on hydride formation; measurement of the electrochemical property differences between hydride and parent material for understanding and predicting corrosion resistance; in situ environmental transmission electron microscope observation of hydride formation; development of a predictive simulation for mechanical property changes as a function of irradiation dose; novel test method development for microtensile testing of ionirradiated material to simulate the effect of neutron irradiation on mechanical properties; and successful demonstration of an Idaho National Labs-based sample preparation and shipping method for subsequent Sandia-based analysis of post-reactor cladding.

  15. DPC loading feasibility study report

    Energy Technology Data Exchange (ETDEWEB)

    Dafoe, R.E.; Lopez, D.A.; Williams, K.L.

    1997-11-01

    Disposal of radioactive wastes now stored at the Idaho Chemical Processing Plant at the Idaho National Engineering and Environmental Laboratory is mandated under a ``Settlement Agreement`` between the Department of Energy and the State of Idaho. This study investigates the feasibility of using the Dry Transfer Cell facility to package waste into Dual Purpose Canisters for interim storage at the adjacent Dry Storage System comprised of an interim storage pad with NUHOMS{reg_sign} storage modules. The wastes would then be road-ready for eventual disposal in a permanent repository. The operating period for these activities is expected to be from 2015 to 2035.

  16. Polarized-interferometer feasibility study

    Science.gov (United States)

    Raab, F. H.

    1983-01-01

    The feasibility of using a polarized-interferometer system as a rendezvous and docking sensor for two cooperating spacecraft was studied. The polarized interferometer is a radio frequency system for long range, real time determination of relative position and attitude. Range is determined by round trip signal timing. Direction is determined by radio interferometry. Relative roll is determined from signal polarization. Each spacecraft is equipped with a transponder and an antenna array. The antenna arrays consist of four crossed dipoles that can transmit or receive either circularly or linearly polarized signals. The active spacecraft is equipped with a sophisticated transponder and makes all measurements. The transponder on the passive spacecraft is a relatively simple repeater. An initialization algorithm is developed to estimate position and attitude without any a priori information. A tracking algorithm based upon minimum variance linear estimators is also developed. Techniques to simplify the transponder on the passive spacecraft are investigated and a suitable configuration is determined. A multiple carrier CW signal format is selected. The dependence of range accuracy and ambiguity resolution error probability are derived and used to design a candidate system. The validity of the design and the feasibility of the polarized interferometer concept are verified by simulation.

  17. LDRD Annual Report FY2006

    Energy Technology Data Exchange (ETDEWEB)

    Sketchley, J A; Kotta, P; De Yoreo, J; Jackson, K; van Bibber, K

    2007-03-20

    The Laboratory Directed Research and Development (LDRD) Program, authorized by Congress in 1991 and administered by the Laboratory Science and Technology Office, is our primary means for pursuing innovative, long-term, high-risk, and potentially high-payoff research that supports the missions of the Laboratory, the Department of Energy, and National Nuclear Security Administration in national security, energy security, environmental management, bioscience and technology to improve human health, and breakthroughs in fundamental science and technology. The accomplishments described in this Annual Report demonstrate the strong alignment of the LDRD portfolio with these missions and contribute to the Laboratory's success in meeting its goals. The LDRD budget of $92 million for FY2006 sponsored 188 projects. These projects were selected through an extensive peer-review process to ensure the highest scientific quality and mission relevance. Each year, the number of deserving proposals far exceeds the funding available, making the selection a tough one indeed. Our ongoing investments in LDRD have reaped long-term rewards for the Laboratory and the nation. Many Laboratory programs trace their roots to research thrusts that began several years ago under LDRD sponsorship. In addition, many LDRD projects contribute to more than one mission area, leveraging the Laboratory's multidisciplinary team approach to science and technology. Safeguarding the nation from terrorist activity and the proliferation of weapons of mass destruction will be an enduring mission of this Laboratory, for which LDRD will continue to play a vital role. The LDRD Program is a success story. Our projects continue to win national recognition for excellence through prestigious awards, papers published in peer-reviewed journals, and patents granted. With its reputation for sponsoring innovative projects, the LDRD Program is also a major vehicle for attracting and retaining the best and the

  18. 7 CFR 1980.442 - Feasibility studies.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 14 2010-01-01 2009-01-01 true Feasibility studies. 1980.442 Section 1980.442... studies. A feasibility study by a recognized independent consultant will be required for all loans, except... a feasibility study for loans to existing businesses when the financial history of the business,...

  19. 25 CFR 41.7 - Feasibility studies.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Feasibility studies. 41.7 Section 41.7 Indians BUREAU OF... NAVAJO COMMUNITY COLLEGE Tribally Controlled Community Colleges § 41.7 Feasibility studies. (a) Grants... initiate a feasibility study to determine whether there is justification to encourage and maintain...

  20. IPNS upgrade: A feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-04-01

    Many of Argonne National Laboratory`s (ANL`s) scientific staff members were very active in R&D work related to accelerator-based spoliation sources in the 1970s and early 1980s. In 1984, the Seitz/Eastman Panel of the National Academy of Sciences reviewed U.S. materials science research facilities. One of the recommendations of this panel was that the United States build a reactor-based steady-state source, the Advanced Neutron Source (ANS), at Oak Ridge National Laboratory. Subsequently, R&D activities related to the design of an accelerator-based source assumed a lower priority. The resumption of pulsed-source studies in this country started simultaneously with design activities in Europe aimed at the European Spallation Source (ESS). The European Community funded a workshop in September 1991 to define the parameters of the ESS. Participants in this workshop included both accelerator builders and neutron source users. A consortium of European countries has proposed to build a 5-MW pulsed source, and a feasibility study is currently under way. Soon after the birth of the ESS, a small group at ANL set about bringing themselves up to date on pulsed-source information since 1984 and studied the feasibility of upgrading ANL`s Intense Pulsed Neutron Source (IPNS) to 1 MW by means of a rapidly cycling synchrotron that could be housed, along with its support facilities, in existing buildings. In early 1993, the Kohn panel recommended that (1) design and construction of the ANS should be completed according to the proposed project schedule and (2) development of competitive proposals for cost-effective design and construction of a 1-MW pulsed spallation source should be authorized immediately.

  1. Photoacoustic biopsy: a feasibility study

    Science.gov (United States)

    Xu, Guan; Tomlins, Scott A.; Siddiqui, Javed; Davis, Mandy A.; Kunju, Lakshmi P.; Wei, John T.; Wang, Xueding

    2015-03-01

    Photoacoustic (PA) measurements encode the information associated with both physical microstructures and chemical contents in biological tissues. A two-dimensional physio-chemical spectrogram (PCS) can be formulated by combining the power spectra of PA signals acquired at a series of optical wavelengths. The analysis of PCS, or namely PA physio-chemical analysis (PAPCA), enables the quantification of the concentrations and the spatial distributions of a variety of chemical components in the tissue. The chemical components and their distribution are the two major features observed in the biopsy procedures which have been regarded as the gold standard of the diagnosis of many diseases. Taking non-alcoholic fatty liver disease and prostate cancer for example, this study investigates the feasibility of PAPCA in characterizing the histopathological changes in the diseased conditions in biological tissue. A catheter based setup facilitating measurement in deep tissues was also proposed and tested.

  2. SRNL LDRD ANNUAL REPORT 2008

    Energy Technology Data Exchange (ETDEWEB)

    French, T

    2008-12-29

    The Laboratory Director is pleased to have the opportunity to present the 2008 Laboratory Directed Research and Development (LDRD) annual report. This is my first opportunity to do so, and only the second such report that has been issued. As will be obvious, SRNL has built upon the excellent start that was made with the LDRD program last year, and researchers have broken new ground in some important areas. In reviewing the output of this program this year, it is clear that the researchers implemented their ideas with creativity, skill and enthusiasm. It is gratifying to see this level of participation, because the LDRD program remains a key part of meeting SRNL's and DOE's strategic goals, and helps lay a solid scientific foundation for SRNL as the premier applied science laboratory. I also believe that the LDRD program's results this year have demonstrated SRNL's value as the EM Corporate Laboratory, having advanced knowledge in a spectrum of areas, including reduction of the technical risks of cleanup, separations science, packaging and transportation of nuclear materials, and many others. The research in support of Energy Security and National and Homeland Security has been no less notable. SRNL' s researchers have shown again that the nascent LDRD program is a sound investment for DOE that will pay off handsomely for the nation as time goes on.

  3. Tiger LDRD final report

    Energy Technology Data Exchange (ETDEWEB)

    Steich, D J; Brugger, S T; Kallman, J S; White, D A

    2000-02-01

    This final report describes our efforts on the Three-Dimensional Massively Parallel CEM Technologies LDRD project (97-ERD-009). Significant need exists for more advanced time domain computational electromagnetics modeling. Bookkeeping details and modifying inflexible software constitute a vast majority of the effort required to address such needs. The required effort escalates rapidly as problem complexity increases. For example, hybrid meshes requiring hybrid numerics on massively parallel platforms (MPPs). This project attempts to alleviate the above limitations by investigating flexible abstractions for these numerical algorithms on MPPs using object-oriented methods, providing a programming environment insulating physics from bookkeeping. The three major design iterations during the project, known as TIGER-I to TIGER-III, are discussed. Each version of TIGER is briefly discussed along with lessons learned during the development and implementation. An Application Programming Interface (API) of the object-oriented interface for Tiger-III is included in three appendices. The three appendices contain the Utilities, Entity-Attribute, and Mesh libraries developed during the project. The API libraries represent a snapshot of our latest attempt at insulated the physics from the bookkeeping.

  4. Muon muon collider: Feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-06-18

    A feasibility study is presented of a 2 + 2 TeV muon collider with a luminosity of L = 10{sup 35} cm{sup {minus}2} s{sup {minus}1}. The resulting design is not optimized for performance, and certainly not for cost; however, it does suffice--the authors believe--to allow them to make a credible case, that a muon collider is a serious possibility for particle physics and, therefore, worthy of R and D support so that the reality of, and interest in, a muon collider can be better assayed. The goal of this support would be to completely assess the physics potential and to evaluate the cost and development of the necessary technology. The muon collider complex consists of components which first produce copious pions, then capture the pions and the resulting muons from their decay; this is followed by an ionization cooling channel to reduce the longitudinal and transverse emittance of the muon beam. The next stage is to accelerate the muons and, finally, inject them into a collider ring which has a small beta function at the colliding point. This is the first attempt at a point design and it will require further study and optimization. Experimental work will be needed to verify the validity of diverse crucial elements in the design.

  5. Feasibility study: PASS computer environment

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-03-10

    The Policy Analysis Screening System (PASS) is a computerized information-retrieval system designed to provide analysts in the Department of Energy, Assistant Secretary for Environment, Office of Technology Impacts (DOE-ASEV-OTI) with automated access to articles, computer simulation outputs, energy-environmental statistics, and graphics. Although it is essential that PASS respond quickly to user queries, problems at the computer facility where it was originally installed seriously slowed PASS's operations. Users attempting to access the computer by telephone repeatedly encountered busy signals and, once logged on, experienced unsatisfactory delays in response to commands. Many of the problems stemmed from the system's facility manager having brought another large user onto the system shortly after PASS was implemented, thereby significantly oversubscribing the facility. Although in March 1980 Energy Information Administration (EIA) transferred operations to its own computer facility, OTI has expressed concern that any improvement in computer access time and response time may not be sufficient or permanent. Consequently, a study was undertaken to assess the current status of the system, to identify alternative computer environments, and to evaluate the feasibility of each alternative in terms of its cost and its ability to alleviate current problems.

  6. Feasibility Study on HYSOL CSP

    DEFF Research Database (Denmark)

    Nielsen, Lars Henrik; Skytte, Klaus; Pérez, Cristian Hernán Cabrera

    2016-01-01

    integrated HYSOL concept, therefore, becomes a fully dispatchable (offering firm power) and fully renewable energy source (RES) based power supply alternative, offering CO2-free electricity in regions with sufficient solar resources. The economic feasibility of HYSOL configurations is addressed in this paper....... The CO2 free HYSOL alternative is discussed relative to conventional reference firm power generation technologies. In particular the HYSOL performance relative to new power plants based on natural gas (NG) such as open cycle or combined cycle gas turbines (OCGT or CCGT) are in focus. The feasibility...

  7. Dual-Doppler Feasibility Study

    Science.gov (United States)

    Huddleston, Lisa L.

    2012-01-01

    When two or more Doppler weather radar systems are monitoring the same region, the Doppler velocities can be combined to form a three-dimensional (3-D) wind vector field thus providing for a more intuitive analysis of the wind field. A real-time display of the 3-D winds can assist forecasters in predicting the onset of convection and severe weather. The data can also be used to initialize local numerical weather prediction models. Two operational Doppler Radar systems are in the vicinity of Kennedy Space Center (KSC) and Cape Canaveral Air Force Station (CCAFS); these systems are operated by the 45th Space Wing (45 SW) and the National Weather Service Melbourne, Fla. (NWS MLB). Dual-Doppler applications were considered by the 45 SW in choosing the site for the new radar. Accordingly, the 45th Weather Squadron (45 WS), NWS MLB and the National Aeronautics and Space Administration tasked the Applied Meteorology Unit (AMU) to investigate the feasibility of establishing dual-Doppler capability using the two existing systems. This study investigated technical, hardware, and software requirements necessary to enable the establishment of a dual-Doppler capability. Review of the available literature pertaining to the dual-Doppler technique and consultation with experts revealed that the physical locations and resulting beam crossing angles of the 45 SW and NWS MLB radars make them ideally suited for a dual-Doppler capability. The dual-Doppler equations were derived to facilitate complete understanding of dual-Doppler synthesis; to determine the technical information requirements; and to determine the components of wind velocity from the equation of continuity and radial velocity data collected by the two Doppler radars. Analysis confirmed the suitability of the existing systems to provide the desired capability. In addition, it is possible that both 45 SW radar data and Terminal Doppler Weather Radar data from Orlando International Airport could be used to alleviate any

  8. Multnomah County Hydrokinetic Feasibility Study: Final Feasibility Study Report

    Energy Technology Data Exchange (ETDEWEB)

    Spain, Stephen

    2012-03-15

    HDR has completed a study of the technical, regulatory, and economic feasibility of installing hydrokinetic turbines under the Morrison, Broadway, and Sellwood bridges. The primary objective of installing hydrokinetic turbines is a demonstration of in-stream hydrokinetic technologies for public education and outreach. Due to the low gradient of the Lower Willamette and the effects of the tide, velocities in the area in consideration are simply not high enough to economically support a commercial installation. While the velocities in the river may at times provide enough energy for a commercial turbine to reach capacity, the frequency and duration of high flow events which provide suitable velocities is not sufficient to support a commercial hydrokinetic installation. We have observed that over an 11 year period, daily average velocities in the Lower Willamette exceeded a nominal cut-in speed of 0.75 m/s only 20% of the time, leaving net zero power production for the remaining 80% of days. The Sellwood Bridge site was estimated to have the best hydrokinetic resource, with an estimated average annual production of about 9,000 kWh. The estimated production could range from 2,500 kWh to 15,000 kWh. Based on these energy estimates, the amount of revenue generated through either a power purchase agreement (PPA) or recovered through net metering is not sufficient to repay the project costs within the life of the turbine. The hydrokinetic resource at the Morrison and Broadway Bridges is slightly smaller than at the Sellwood Bridge. While the Broadway and Morrison Bridges have existing infrastructure that could be utilized, the project is not expected to generate enough revenue to repay the investment. Despite low velocities and energy production, the sites themselves are favorable for installation of a demonstration or experimental project. With high public interest in renewable energy, the possibility exists to develop a hydrokinetic test site which could provide

  9. LDRD FY 2014 Program Plan

    Energy Technology Data Exchange (ETDEWEB)

    Anita Gianotto; Dena Tomchak

    2013-08-01

    As required by DOE Order 413.2B the FY 2014 Program Plan is written to communicate ares of investment and approximate amounts being requested for the upcoming fiscal year. The program plan also includes brief highlights of current or previous LDRD projects that have an opportunity to impact our Nation's current and future energy challenges.

  10. Idaho National Laboratory Annual Report FY 2013 LDRD Project Summaries

    Energy Technology Data Exchange (ETDEWEB)

    Dena Tomchak

    2014-03-01

    The FY 2013 LDRD Annual Report is a compendium of the diverse research performed to develop and ensure the INL’s technical capabilities support the current and future DOE missions and national research priorities. LDRD is essential to INL—it provides a means for the Laboratory to maintain scientific and technical vitality while funding highly innovative, high-risk science and technology research and development (R&D) projects. The program enhances technical capabilities at the Laboratory, providing scientific and engineering staff with opportunities to explore proof-of-principle ideas, advanced studies of innovative concepts, and preliminary technical analyses. Established by Congress in 1991, the LDRD Program proves its benefit each year through new programs, intellectual property, patents, copyrights, national and international awards, and publications.

  11. Cashless ships: a feasiblity study

    OpenAIRE

    Manhertz, Carey M

    1997-01-01

    Approved for public release; distribution is unlimited The advent of mechanisms for facilitating electronic commerce has triggered widespread interest in several fields. However, research in electronic commerce to include Smart Card Technology has mainly focused on land-based transactions. This research investigates the role of Information Technology in facilitating electronic commerce at sea, aboard U.S. Navy ships. It determines the feasibility of replacing the current cash shipboard arc...

  12. WERF MACT Feasibility Study Report

    Energy Technology Data Exchange (ETDEWEB)

    B. Bonnema; D. Moser; J. Riedesel; K. Kooda; K. Liekhus; K. Rebish; S. Poling

    1998-11-01

    This study was undertaken to determine the technical feasibility of upgrading the Waste Experimental Reduction Facility (WERF) at the Idaho National Engineering and Environmental Laboratory to meet the offgas emission limits proposed in the Maximum Achievable Control Technologies (MACT)rule. Four practicable offgas treatment processes were identified, which, if installed, would enable the WERF to meet the anticipated MACT emission limits for dioxins and furans (D/F), hydrochloric acid (HCI), and mercury (Hg). Due to the three-year time restraint for MACT compliance, any technology chosen for the upgrade must be performed within the general plant project funding limit of $5 M. The option selected consists of a partial-quench evaporative cooler with dry sorbent injection for HCI removal followed by a sulfur-impregnated activated carbon bed for Hg control. The planning cost estimate for implementing the option is $4.17 M (with 24% contingency). The total estimated cost includes capital costs, design and construction costs, and project management costs. Capital costs include the purchase of a new offgas evaporative cooler, a dry sorbent injection system with reagent storage, a new fabric filter baghouse, a fixed carbon bed absorber, and two offgas induced draft exhaust fans. It is estimated that 21 months will be required to complete the recommended modification to the WERF. The partial-quench cooler is designed to rapidly cool the offgas exiting the secondary combustion chamber to minimize D/F formation. Dry sorbent injection of an alkali reagent into the offgas is recommended. The alkali reacts with the HCI to form a salt, which is captured with the fly ash in the baghouse. A design HCI removal efficiency of 97.2% allows for the feeding 20 lbs/hr of chlorine to the WERF incinerator. The sorbent feed rate can be adjusted to achieve the desired HCI removal efficiency. A fixed bed of sulfur-impregnated carbon was conservatively sized for a total Hg removal capacity when

  13. Sault Tribe Wind Energy Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Toni Osterhout; Global Energy Concepts

    2005-07-31

    The Sault Tribe conducted a feasibility study on tribal lands in the Upper Peninsula of Michigan to determine the technical and economic feasibility of both small and large-scale wind power development on tribal lands. The study included a wind resource assessment, transmission system analysis, engineering and regulatory analyzes and assessments.

  14. LDRD 149045 final report distinguishing documents.

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, Scott A.

    2010-09-01

    This LDRD 149045 final report describes work that Sandians Scott A. Mitchell, Randall Laviolette, Shawn Martin, Warren Davis, Cindy Philips and Danny Dunlavy performed in 2010. Prof. Afra Zomorodian provided insight. This was a small late-start LDRD. Several other ongoing efforts were leveraged, including the Networks Grand Challenge LDRD, and the Computational Topology CSRF project, and the some of the leveraged work is described here. We proposed a sentence mining technique that exploited both the distribution and the order of parts-of-speech (POS) in sentences in English language documents. The ultimate goal was to be able to discover 'call-to-action' framing documents hidden within a corpus of mostly expository documents, even if the documents were all on the same topic and used the same vocabulary. Using POS was novel. We also took a novel approach to analyzing POS. We used the hypothesis that English follows a dynamical system and the POS are trajectories from one state to another. We analyzed the sequences of POS using support vector machines and the cycles of POS using computational homology. We discovered that the POS were a very weak signal and did not support our hypothesis well. Our original goal appeared to be unobtainable with our original approach. We turned our attention to study an aspect of a more traditional approach to distinguishing documents. Latent Dirichlet Allocation (LDA) turns documents into bags-of-words then into mixture-model points. A distance function is used to cluster groups of points to discover relatedness between documents. We performed a geometric and algebraic analysis of the most popular distance functions and made some significant and surprising discoveries, described in a separate technical report.

  15. Muon Muon Collider: Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Gallardo, J.C.; Palmer, R.B.; /Brookhaven; Tollestrup, A.V.; /Fermilab; Sessler, A.M.; /LBL, Berkeley; Skrinsky, A.N.; /Novosibirsk, IYF; Ankenbrandt, C.; Geer, S.; Griffin, J.; Johnstone, C.; Lebrun, P.; McInturff, A.; Mills, Frederick E.; Mokhov, N.; Moretti, A.; Neuffer, D.; Ng, K.Y.; Noble, R.; Novitski, I.; Popovic, M.; Qian, C.; Van Ginneken, A. /Fermilab /Brookhaven /Wisconsin U., Madison /Tel Aviv U. /Indiana U. /UCLA /LBL, Berkeley /SLAC /Argonne /Sobolev IM, Novosibirsk /UC, Davis /Munich, Tech. U. /Virginia U. /KEK, Tsukuba /DESY /Novosibirsk, IYF /Jefferson Lab /Mississippi U. /SUNY, Stony Brook /MIT /Columbia U. /Fairfield U. /UC, Berkeley

    2012-04-05

    A feasibility study is presented of a 2 + 2 TeV muon collider with a luminosity of L = 10{sup 35} cm{sup -2}s{sup -1}. The resulting design is not optimized for performance, and certainly not for cost; however, it does suffice - we believe - to allow us to make a credible case, that a muon collider is a serious possibility for particle physics and, therefore, worthy of R and D support so that the reality of, and interest in, a muon collider can be better assayed. The goal of this support would be to completely assess the physics potential and to evaluate the cost and development of the necessary technology. The muon collider complex consists of components which first produce copious pions, then capture the pions and the resulting muons from their decay; this is followed by an ionization cooling channel to reduce the longitudinal and transverse emittance of the muon beam. The next stage is to accelerate the muons and, finally, inject them into a collider ring wich has a small beta function at the colliding point. This is the first attempt at a point design and it will require further study and optimization. Experimental work will be needed to verify the validity of diverse crucial elements in the design. Muons because of their large mass compared to an electron, do not produce significant synchrotron radiation. As a result there is negligible beamstrahlung and high energy collisions are not limited by this phenomena. In addition, muons can be accelerated in circular devices which will be considerably smaller than two full-energy linacs as required in an e{sup +} - e{sup -} collider. A hadron collider would require a CM energy 5 to 10 times higher than 4 TeV to have an equivalent energy reach. Since the accelerator size is limited by the strength of bending magnets, the hadron collider for the same physics reach would have to be much larger than the muon collider. In addition, muon collisions should be cleaner than hadron collisions. There are many detailed particle

  16. Muon Muon Collider: Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Gallardo, J.C.; Palmer, R.B.; /Brookhaven; Tollestrup, A.V.; /Fermilab; Sessler, A.M.; /LBL, Berkeley; Skrinsky, A.N.; /Novosibirsk, IYF; Ankenbrandt, C.; Geer, S.; Griffin, J.; Johnstone, C.; Lebrun, P.; McInturff, A.; Mills, Frederick E.; Mokhov, N.; Moretti, A.; Neuffer, D.; Ng, K.Y.; Noble, R.; Novitski, I.; Popovic, M.; Qian, C.; Van Ginneken, A. /Fermilab /Brookhaven /Wisconsin U., Madison /Tel Aviv U. /Indiana U. /UCLA /LBL, Berkeley /SLAC /Argonne /Sobolev IM, Novosibirsk /UC, Davis /Munich, Tech. U. /Virginia U. /KEK, Tsukuba /DESY /Novosibirsk, IYF /Jefferson Lab /Mississippi U. /SUNY, Stony Brook /MIT /Columbia U. /Fairfield U. /UC, Berkeley

    2012-04-05

    A feasibility study is presented of a 2 + 2 TeV muon collider with a luminosity of L = 10{sup 35} cm{sup -2}s{sup -1}. The resulting design is not optimized for performance, and certainly not for cost; however, it does suffice - we believe - to allow us to make a credible case, that a muon collider is a serious possibility for particle physics and, therefore, worthy of R and D support so that the reality of, and interest in, a muon collider can be better assayed. The goal of this support would be to completely assess the physics potential and to evaluate the cost and development of the necessary technology. The muon collider complex consists of components which first produce copious pions, then capture the pions and the resulting muons from their decay; this is followed by an ionization cooling channel to reduce the longitudinal and transverse emittance of the muon beam. The next stage is to accelerate the muons and, finally, inject them into a collider ring wich has a small beta function at the colliding point. This is the first attempt at a point design and it will require further study and optimization. Experimental work will be needed to verify the validity of diverse crucial elements in the design. Muons because of their large mass compared to an electron, do not produce significant synchrotron radiation. As a result there is negligible beamstrahlung and high energy collisions are not limited by this phenomena. In addition, muons can be accelerated in circular devices which will be considerably smaller than two full-energy linacs as required in an e{sup +} - e{sup -} collider. A hadron collider would require a CM energy 5 to 10 times higher than 4 TeV to have an equivalent energy reach. Since the accelerator size is limited by the strength of bending magnets, the hadron collider for the same physics reach would have to be much larger than the muon collider. In addition, muon collisions should be cleaner than hadron collisions. There are many detailed particle

  17. Feasibility Study on HYSOL CSP

    DEFF Research Database (Denmark)

    Nielsen, Lars Henrik; Skytte, Klaus; Pérez, Cristian Hernán Cabrera

    2016-01-01

    salt can be stored and the stored heat can thus increase the load factor and the usability for a CSP plant, e.g. to cover evening peak demand. In the HYSOL concept (HYbrid SOLar) such configuration is extended further to include a gas turbine fuelled by upgraded biogas or natural gas. The optimised....... The CO2 free HYSOL alternative is discussed relative to conventional reference firm power generation technologies. In particular the HYSOL performance relative to new power plants based on natural gas (NG) such as open cycle or combined cycle gas turbines (OCGT or CCGT) are in focus. The feasibility......Concentrating Solar Power (CSP) plants utilize thermal conversion of direct solar irradiation. A trough or tower configuration focuses solar radiation and heats up oil or molten salt that subsequently in high temperature heat exchangers generate steam for power generation. High temperature molten...

  18. Nuts and bolts of conducting feasibility studies.

    Science.gov (United States)

    Tickle-Degnen, Linda

    2013-01-01

    Many factors can affect the successful implementation and validity of intervention studies. A primary purpose of feasibility and pilot studies is to assess the potential for successful implementation of the proposed main intervention studies and to reduce threats to the validity of these studies. This article describes a typology to guide the aims of feasibility and pilot studies designed to support the development of randomized controlled trials and provides an example of the studies underlying the development of one rehabilitation trial. The purpose of most feasibility and pilot studies should be to describe information and evidence related to the successful implementation and validity of a planned main trial. Null hypothesis significance testing is not appropriate for these studies unless the sample size is properly powered. The primary tests of the intervention effectiveness hypotheses should occur in the main study, not in the studies that are serving as feasibility or pilot studies.

  19. Ecological feasibility studies in restoration decision making.

    Science.gov (United States)

    Hopfensperger, Kristine N; Engelhardt, Katharina A M; Seagle, Steven W

    2007-06-01

    The restoration of degraded systems is essential for maintaining the provision of valuable ecosystem services, including the maintenance of aesthetic values. However, restoration projects often fail to reach desired goals for a variety of ecologic, financial, and social reasons. Feasibility studies that evaluate whether a restoration effort should even be attempted can enhance restoration success by highlighting potential pitfalls and gaps in knowledge before the design phase of a restoration. Feasibility studies also can bring stakeholders together before a restoration project is designed to discuss potential disagreements. For these reasons, a feasibility study was conducted to evaluate the efficacy of restoring a tidal freshwater marsh in the Potomac River near Alexandria, Virginia. The study focused on science rather than engineering questions, and thus differed in approach from other feasibility studies that are mostly engineering driven. The authors report the framework they used to conduct a feasibility study to inform other potential restoration projects with similar goals. The seven steps of the framework encompass (1) initiation of a feasibility study, (2) compilation of existing data, (3) collection of current site information, (4) examination of case studies, (5) synthesis of information in a handbook, (6) meeting with selected stakeholders, and (7) evaluation of meeting outcomes. By conducting a feasibility study using the seven-step framework, the authors set the stage for conducting future compliance studies and enhancing the chance of a successful restoration.

  20. Three Affliated Tribes Renewable Energy Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Belvin Pete; Kent Good; Krista Gordon; Ed McCarthy,

    2006-05-26

    The Three Affliated Tribes on the Fort Berthold Reservation studied the feasibility of a commercial wind facility on land selected and owned by the Tribes and examined the potential for the development of renewable energy resources on Tribal Lands.

  1. Conceptual Thermal Treatment Technologies Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Suer, A.

    1996-02-28

    This report presents a conceptual Thermal Treatment Technologies Feasibility Study (FS) for the Savannah River Site (SRS) focusing exclusively on thermal treatment technologies for contaminated soil, sediment, or sludge remediation projects.

  2. White Earth Biomass/Biogas Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Triplett, Michael

    2015-03-12

    The White Earth Nation examined the feasibility of cost savings and fossil energy reduction through the installation of biogas/biomass boiler at the tribal casino. The study rejected biogas options due to availability and site constraints, but found a favorable environment for technical and financial feasibility of installing a 5 MMBtu hot water boiler system to offset 60-70 percent of current fuel oil and propane usage.

  3. Florida Panther Reintroduction Feasibility Study

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Summary and final report of a Florida Fish and Wildlife Conservation Commission study to evalaute initial stocking of mountain lion populations in northern...

  4. Marketing FE. A Feasibility Study.

    Science.gov (United States)

    HR & H Marketing Research International, Ltd., London (England).

    A study evaluated procedures currently used to market adult education at five colleges in Great Britain. Data were collected from roundtable discussions with the principals and vice-principals of the five participating colleges and from interviews and questionnaires administered to staff members from each college and to representatives of…

  5. Satellite animal tracking feasibility studies

    Science.gov (United States)

    Buechner, H. K.

    1975-01-01

    A study was initiated in Tsavo National Park to determine movements and home ranges of individual elephants and their relations to overall distribution patterns and environmental factors such as rainfall. Methods used were radio tracking and observations of visually identifiable individuals. Aerial counts provided data on overall distribution. Two bulls and two cows were radio-tagged in Tsavo West and two bulls and four cows in Tsavo East, providing home range and movement data. The movements of individuals were useful in interpreting relatively major shifts in elephant distribution. Results point to the following preliminary conclusions: (1) elephants in the Tsavo area undertook long distance movements in fairly direct response to localized rainfall; (2) a subdivision of the overall population into locally distinct units may exist during the dry season but did not occur after significant rainfall; and (3) food appears to be the primary factor governing movements and distribution of elephants in the area.

  6. Technical feasibility study on polycarbonate solar panels

    NARCIS (Netherlands)

    Hackmann, M.M.; Meuwissen, M.H.H.; Bots, T.L.; Buijs, J.A.H.M.; Broek, K.M.; Kinderman, R.; Tanck, O.B.F.; Schuurmans, F.M.

    2004-01-01

    This paper describes a technical feasibility study on the application of polycarbonate (PC) plates in a superstrate photovoltaic module design. The lamination process was performed in a conventional laminator apparatus using low temperature curing (100°C) ethylene-vinyl-acetate (EVA) as the potting

  7. ECRH for JET: A feasibility study

    NARCIS (Netherlands)

    Lennholm, M.; Giruzzi, G.; Parkin, A.; Bouquey, F.; Braune, H.; Bruschi, A.; de la Luna, E.; Denisov, G.; Edlington, T.; Farina, D.; Farthing, J.; Figini, L.; Garavaglia, S.; Garcia, J.; Gerbaud, T.; Granucci, G.; Henderson, M.; Horton, L.; Kasparek, W.; Khilar, P.; Jennison, M.; Kirneva, N.; Kislov, D.; Kuyanov, A.; Litaudon, X.; Litvak, A. G.; Moro, A.; Nowak, S.; Parail, V.; Plaum, B.; Rimini, F.; Saibene, G.; Sips, A.; Sozzi, C.; Späh, P.; Trukhina, E.; Vaccaro, A.; Vdovin, V.

    2011-01-01

    For JET to fulfil its mission in preparing ITER operation, the installation of an electron cyclotron resonance heating system on JET would be desirable. The study described in this paper has investigated the feasibility of installing such a system on JET. The principal goals of such a system are: cu

  8. Renewable Energy Feasibility Study Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Rooney, Tim [Antares Group Inc.

    2013-10-30

    The Gila River Indian Community (GRIC or the Community) contracted the ANTARES Group, Inc. (“ANTARES”) to assess the feasibility of solar photovoltaic (PV) installations. A solar energy project could provide a number of benefits to the Community in terms of potential future energy savings, increased employment, environmental benefits from renewable energy generation and usage, and increased energy self-sufficiency. The study addresses a number of facets of a solar project’s overall feasibility, including: Technical appropriateness; Solar resource characteristics and expected system performance; Levelized cost of electricity (LCOE) economic assessment. The Gila River Indian Community (GRIC or the Community) contracted the ANTARES Group, Inc. (“ANTARES”) to prepare a biomass resource assessment study and evaluate the feasibility of a bioenergy project on Community land. A biomass project could provide a number of benefits to the Community in terms of increased employment, environmental benefits from renewable energy generation and usage, and increased energy self-sufficiency. The study addresses a number of facets of a biomass project’s overall feasibility, including: Resource analysis and costs; Identification of potential bioenergy projects; Technical and economic (levelized cost of energy) modeling for selected project configuration.

  9. FY2014 LBNL LDRD Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    Ho, Darren [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2015-06-01

    Laboratory (Berkeley Lab or LBNL) is a multi-program national research facility operated by the University of California for the Department of Energy (DOE). As an integral element of DOE’s National Laboratory System, Berkeley Lab supports DOE’s missions in fundamental science, energy resources, and environmental quality. Berkeley Lab programs advance four distinct goals for DOE and the nation. The LDRD program supports Berkeley Lab’s mission in many ways. First, because LDRD funds can be allocated within a relatively short time frame, Berkeley Lab researchers can support the mission of the Department of Energy (DOE) and serve the needs of the nation by quickly responding to forefront scientific problems. Second, LDRD enables Berkeley Lab to attract and retain highly qualified scientists and to support their efforts to carry out worldleading research. In addition, the LDRD program also supports new projects that involve graduate students and postdoctoral fellows, thus contributing to the education mission of Berkeley Lab.

  10. Final LDRD report :

    Energy Technology Data Exchange (ETDEWEB)

    Ambrosini, Andrea; Miller, James Edward; Allendorf, Mark D.; Coker, Eric Nicholas; Ermanoski, Ivan; Hogan, Roy E.,; McDaniel, Anthony H.

    2014-01-01

    Despite rapid progress, solar thermochemistry remains high risk; improvements in both active materials and reactor systems are needed. This claim is supported by studies conducted both prior to and as part of this project. Materials offer a particular large opportunity space as, until recently, very little effort apart from basic thermodynamic analysis was extended towards understanding this most fundamental component of a metal oxide thermochemical cycle. Without this knowledge, system design was hampered, but more importantly, advances in these crucial materials were rare and resulted more from intuition rather than detailed insight. As a result, only two basic families of potentially viable solid materials have been widely considered, each of which has significant challenges. Recent efforts towards applying an increased level of scientific rigor to the study of thermochemical materials have provided a much needed framework and insights toward developing the next generation of highly improved thermochemically active materials. The primary goal of this project was to apply this hard-won knowledge to rapidly advance the field of thermochemistry to produce a material within 2 years that is capable of yielding CO from CO2 at a 12.5 % reactor efficiency. Three principal approaches spanning a range of risk and potential rewards were pursued: modification of known materials, structuring known materials, and identifying/developing new materials for the application. A newly developed best-of-class material produces more fuel (9x more H2, 6x more CO) under milder conditions than the previous state of the art. Analyses of thermochemical reactor and system efficiencies and economics were performed and a new hybrid concept was reported. The larger case for solar fuels was also further refined and documented.

  11. Enhanced Micellar Catalysis LDRD.

    Energy Technology Data Exchange (ETDEWEB)

    Betty, Rita G.; Tucker, Mark D; Taggart, Gretchen; Kinnan, Mark K.; Glen, Crystal Chanea; Rivera, Danielle; Sanchez, Andres; Alam, Todd Michael

    2012-12-01

    The primary goals of the Enhanced Micellar Catalysis project were to gain an understanding of the micellar environment of DF-200, or similar liquid CBW surfactant-based decontaminants, as well as characterize the aerosolized DF-200 droplet distribution and droplet chemistry under baseline ITW rotary atomization conditions. Micellar characterization of limited surfactant solutions was performed externally through the collection and measurement of Small Angle X-Ray Scattering (SAXS) images and Cryo-Transmission Electron Microscopy (cryo-TEM) images. Micellar characterization was performed externally at the University of Minnesotas Characterization Facility Center, and at the Argonne National Laboratory Advanced Photon Source facility. A micellar diffusion study was conducted internally at Sandia to measure diffusion constants of surfactants over a concentration range, to estimate the effective micelle diameter, to determine the impact of individual components to the micellar environment in solution, and the impact of combined components to surfactant phase behavior. Aerosolized DF-200 sprays were characterized for particle size and distribution and limited chemical composition. Evaporation rates of aerosolized DF-200 sprays were estimated under a set of baseline ITW nozzle test system parameters.

  12. Gasohol: economic feasibility study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    David, M. L.; Hammaker, G. S.; Buzenberg, R. J.; Wagner, J. P.

    1978-07-01

    This report was prepared by Development Planning and Research Associates, Inc. under a contract with the Energy Research and Development Center of the University of Nebraska in cooperation with the Agricultural Products Industrial Utilization Committee and the State of Nebraska. Funding for this study was provided to the Energy Research and Development Center by the U.S. Department of Energy and the Old West Regional Commission. The primary objective of the study was to: determine the fiscal and market conditions under which the production of gasohol would be profitable for private producers. For purposes of this study, gasohol is a motor fuel consisting of 10 percent agriculturally-derived anhydrous ethanol and 90 percent unleaded gasoline. The study assumes that gasohol can be a fuel substitute for gasoline; indeed, the cost of gasoline will significantly influence that for gasohol. Gasoline prices are determined by factors external to ethanol; thus, the economic feasibility study of gasohol is in large part an economic feasibility study of fuel-grade ethanol production. More specifically, the study examined the following: the technical aspects of distributing, marketing, and using gasohol; the costs of the distribution and marketing of ethanol and gasohol; the energy balance of ethanol production; the cost of producing ethanol; the factors influencing ehtanol plant size and location; and the conditions that would make ethanol economicaly feasible for private producers.

  13. Caltech campus executive LDRD.

    Energy Technology Data Exchange (ETDEWEB)

    Shepodd, Timothy J.; Knudsen, Tamara

    2013-01-01

    The environment most brain systems of humans and other animals are almost constantly confronted with is complex and continuously changing, with each time step updating a potentially bewildering set of opportunities and demands for action. Far from the controlled, discrete trials used in most neuro- and psychological investigations, behavior outside the lab at Caltech is a seamless and continuous process of monitoring (and error correction) of ongoing action, and of evaluating persistence in the current activity with respect to opportunities to switch tasks as alternatives become available. Prior work on frontopolar and prefrontal task switching, use tasks within the same modality (View a stream of symbols on a screen and perform certain response mappings depending on task rules). However, in these task switches the effector is constant: only the mapping of visual symbols to the specific button changes. In this task, the subjects are choosing what kinds of future action decisions they want to perform, where they can control either which body part will act, or which direction they will orient an instructed body action. An effector choice task presents a single target and the subject selects which effector to use to reach the target (eye or hand). While the techniques available for humans can be less spatially resolved compared to non-human primate neural data, they do allow for experimentation on multiple brain areas with relative ease. Thus, we address a broader network of areas involved in motor decisions. We aim to resolve a current dispute regarding the specific functional roles of brain areas that are often co-activated in studies of decision tasks, dorsal premotor cortex(PMd) and posterior parietal cortex(PPC). In one model, the PPC distinctly drives intentions for action selection, whereas PMd stimulation results in complex multi-joint movements without any awareness of, nor subjective feeling of, willing the elicited movement, thus seems to

  14. 2013 SRNL LDRD Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    McWhorter, S.

    2014-03-07

    This report demonstrates the execution of our LDRD program within the objectives and guidelines outlined by the Department of Energy (DOE) through the DOE Order 413.2b. The projects described within the report align purposefully with SRNL’s strategic vision and provide great value to the DOE. The diversity exhibited in the research and development projects underscores the DOE Office of Environmental Management (DOE-EM) mission and enhances that mission by developing the technical capabilities and human capital necessary to support future DOE-EM national needs. As a multiprogram national laboratory, SRNL is applying those capabilities to achieve tangible results for the nation in National Security, Environmental Stewardship, Clean Energy and Nuclear Materials Management.

  15. LDRD Report: Scheduling Irregular Algorithms

    Energy Technology Data Exchange (ETDEWEB)

    Boman, Erik G. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-10-01

    This LDRD project was a campus exec fellowship to fund (in part) Donald Nguyen’s PhD research at UT-Austin. His work has focused on parallel programming models, and scheduling irregular algorithms on shared-memory systems using the Galois framework. Galois provides a simple but powerful way for users and applications to automatically obtain good parallel performance using certain supported data containers. The naïve user can write serial code, while advanced users can optimize performance by advanced features, such as specifying the scheduling policy. Galois was used to parallelize two sparse matrix reordering schemes: RCM and Sloan. Such reordering is important in high-performance computing to obtain better data locality and thus reduce run times.

  16. Feasibility

    NARCIS (Netherlands)

    Bokdam, J.; Braeckel, van A.

    2002-01-01

    Extensive livestock farming, including hay making, seems the most feasible management strategy for open peatland. In the longer term, wilderness grazing may become more feasible. The loss of economic viability of traditional livestock farming and related haymaking may be reversed by innovation of

  17. Feasibility

    NARCIS (Netherlands)

    Bokdam, J.; Braeckel, van A.

    2002-01-01

    Extensive livestock farming, including hay making, seems the most feasible management strategy for open peatland. In the longer term, wilderness grazing may become more feasible. The loss of economic viability of traditional livestock farming and related haymaking may be reversed by innovation of ne

  18. Transportation Energy Pathways LDRD.

    Energy Technology Data Exchange (ETDEWEB)

    Barter, Garrett.; Reichmuth, David.; Westbrook, Jessica; Malczynski, Leonard A.; Yoshimura, Ann S.; Peterson, Meghan B.; West, Todd H.; Manley, Dawn Kataoka; Guzman, Katherine Dunphy; Edwards, Donna M.; Hines, Valerie Ann-Peters

    2012-09-01

    This report presents a system dynamics based model of the supply-demand interactions between the USlight-duty vehicle (LDV) fleet, its fuels, and the corresponding primary energy sources through the year2050. An important capability of our model is the ability to conduct parametric analyses. Others have reliedupon scenario-based analysis, where one discrete set of values is assigned to the input variables and used togenerate one possible realization of the future. While these scenarios can be illustrative of dominant trendsand tradeoffs under certain circumstances, changes in input values or assumptions can have a significantimpact on results, especially when output metrics are associated with projections far into the future. Thistype of uncertainty can be addressed by using a parametric study to examine a range of values for the inputvariables, offering a richer source of data to an analyst.The parametric analysis featured here focuses on a trade space exploration, with emphasis on factors thatinfluence the adoption rates of electric vehicles (EVs), the reduction of GHG emissions, and the reduction ofpetroleum consumption within the US LDV fleet. The underlying model emphasizes competition between13 different types of powertrains, including conventional internal combustion engine (ICE) vehicles, flex-fuel vehicles (FFVs), conventional hybrids(HEVs), plug-in hybrids (PHEVs), and battery electric vehicles(BEVs).We find that many factors contribute to the adoption rates of EVs. These include the pace of technologicaldevelopment for the electric powertrain, battery performance, as well as the efficiency improvements inconventional vehicles. Policy initiatives can also have a dramatic impact on the degree of EV adoption. Theconsumer effective payback period, in particular, can significantly increase the market penetration rates ifextended towards the vehicle lifetime.Widespread EV adoption can have noticeable impact on petroleum consumption and greenhouse gas

  19. Vibrational spectra of nanowires measured using laser doppler vibrometry and STM studies of epitaxial graphene : an LDRD fellowship report.

    Energy Technology Data Exchange (ETDEWEB)

    Biedermann, Laura Butler

    2009-09-01

    A few of the many applications for nanowires are high-aspect ratio conductive atomic force microscope (AFM) cantilever tips, force and mass sensors, and high-frequency resonators. Reliable estimates for the elastic modulus of nanowires and the quality factor of their oscillations are of interest to help enable these applications. Furthermore, a real-time, non-destructive technique to measure the vibrational spectra of nanowires will help enable sensor applications based on nanowires and the use of nanowires as AFM cantilevers (rather than as tips for AFM cantilevers). Laser Doppler vibrometry is used to measure the vibration spectra of individual cantilevered nanowires, specifically multiwalled carbon nanotubes (MWNTs) and silver gallium nanoneedles. Since the entire vibration spectrum is measured with high frequency resolution (100 Hz for a 10 MHz frequency scan), the resonant frequencies and quality factors of the nanowires are accurately determined. Using Euler-Bernoulli beam theory, the elastic modulus and spring constant can be calculated from the resonance frequencies of the oscillation spectrum and the dimensions of the nanowires, which are obtained from parallel SEM studies. Because the diameters of the nanowires studied are smaller than the wavelength of the vibrometer's laser, Mie scattering is used to estimate the lower diameter limit for nanowires whose vibration can be measured in this way. The techniques developed in this thesis can be used to measure the vibrational spectra of any suspended nanowire with high frequency resolution Two different nanowires were measured - MWNTs and Ag{sub 2}Ga nanoneedles. Measurements of the thermal vibration spectra of MWNTs under ambient conditions showed that the elastic modulus, E, of plasma-enhanced chemical vapor deposition (PECVD) MWNTs is 37 {+-} 26 GPa, well within the range of E previously reported for CVD-grown MWNTs. Since the Ag{sub 2}Ga nanoneedles have a greater optical scattering efficiency than

  20. FY05 LDRD Final ReportTime-Resolved Dynamic Studies using Short Pulse X-Ray Radiation

    Energy Technology Data Exchange (ETDEWEB)

    Nelson, A; Dunn, J; van Buuren, T; Budil, K; Sadigh, B; Gilmer, G; Falcone, R; Lee, R; Ng, A

    2006-02-10

    Established techniques must be extended down to the ps and sub-ps time domain to directly probe product states of materials under extreme conditions. We used short pulse ({le} 1 ps) x-ray radiation to track changes in the physical properties in tandem with measurements of the atomic and electronic structure of materials undergoing fast laser excitation and shock-related phenomena. The sources included those already available at LLNL, including the picosecond X-ray laser as well as the ALS Femtosecond Phenomena beamline and the SSRL based sub-picosecond photon source (SPPS). These allow the temporal resolution to be improved by 2 orders of magnitude over the current state-of-the-art, which is {approx} 100 ps. Thus, we observed the manifestations of dynamical processes with unprecedented time resolution. Time-resolved x-ray photoemission spectroscopy and x-ray scattering were used to study phase changes in materials with sub-picosecond time resolution. These experiments coupled to multiscale modeling allow us to explore the physics of materials in high laser fields and extreme non-equilibrium states of matter. The ability to characterize the physical and electronic structure of materials under extreme conditions together with state-of-the-art models and computational facilities will catapult LLNL's core competencies into the scientific world arena as well as support its missions of national security and stockpile stewardship.

  1. Status of LDRD-DR 20070518 development of a magnetically driven target for thermo-nuclear burn studies (u)

    Energy Technology Data Exchange (ETDEWEB)

    Watt, Robert G [Los Alamos National Laboratory; Atchison, W L [Los Alamos National Laboratory; Colgate, S A [Los Alamos National Laboratory; Goforth, J [Los Alamos National Laboratory; Griego, J [Los Alamos National Laboratory; Guzik, J [Los Alamos National Laboratory; Holtkamp, D [Los Alamos National Laboratory; Idzorek, G [Los Alamos National Laboratory; Kirkpatrick, R [Los Alamos National Laboratory; Menikoff, R [Los Alamos National Laboratory; Meyer, R [Los Alamos National Laboratory; Oona, H [Los Alamos National Laboratory; Reardon, P [Los Alamos National Laboratory; Rousculp, C L [Los Alamos National Laboratory; Sgro, A G [Los Alamos National Laboratory; Tabaka, L [Los Alamos National Laboratory

    2010-01-20

    This project is developing a magnetically driven cylindrical confinement system for the creation of a small region of material existing under extreme conditions. Using a Ranchero High Explosive Pulsed Power generator (HEPP) with maximum current ranging from 25- 50 MA depending on the load, a current driven Al cylinder will impact a series of nested, less massive Au shells. Each subsequent shell's inner surface velocity will increase due to it's smaller mass by the ratio 2.01( 1+ m{sub i+ 1}/m i), along with radial convergence. Attaining this ideal result requires highly efficient energy transfer which in turn requires plastic cushions. The final velocity of the last sequential shell will be used to drive a central experimental package in which extreme material conditions will be produced. The inexpensive nature of HEPP and the extreme conditions attainable allow many studies to be conducted in regimes not currently available in the laboratory. One potential central experimental package consists of a cylindrical Inertial Confinement Fusion (ICF) target; a cylindrical Au pusher surrounding frozen DT. This target is used as a design tool. The ICF conditions achieved with such a target would be similar to those created in a double shell ignition capsule at the National Ignition Facility. The system being developed has a range of potential applications.

  2. NASA CPAS Drogue Textile Riser Feasibility Study

    Science.gov (United States)

    Hennings, Elsa J.; Petersen, Michael L.; Anderson, Brian; Johnson, Brian

    2015-01-01

    Steel cable was chosen for the lower end of the drogue and main parachute risers on NASA's Orion Multi Purpose Crew Vehicle Parachute Assembly System (CPAS) to protect the risers from extreme temperatures and abrasion should they contact the crew module during deployment, as was done for Apollo. Due to the weight and deployment complexity inherent in steel, there was significant interest in the possibility of substituting textile for steel for the drogue and main parachute risers. However, textile risers could be damaged when subjected to high temperature and abrasion. Investigations were consequently performed by a subset of the authors to determine whether sacrificial, non-load-bearing textile riser covers could be developed to mitigate the thermal and abrasion concerns. Multiple material combinations were tested, resulting in a cover design capable of protecting the riser against severe riser/crew module contact interactions. A feasibility study was then conducted to evaluate the performance of the textile drogue riser cover in relevant abrasive environments. This paper describes the testing performed and documents the results of this feasibility study.

  3. Evaluating Por Nuestra Salud: A Feasibility Study.

    Science.gov (United States)

    Marshall, Brenda; Gonzales, Gustavo; Kernan, William

    2016-01-01

    This feasibility study evaluated the impact of a culturally consistent diabetes educational program, led by a Latino pastor, on Latino community diabetes knowledge levels. Latino adults were recruited from two churches serving Latino populations, one identified as intervention, the other as nonintervention. Both churches received the American Diabetes Association's booklets on diabetes education, "Four Steps to Control Your Diabetes for Life." The intervention group also received weekly reviews of the booklet's information from the church pastor, who was educated about diabetes by a Latino family nurse practitioner. Pre- and postintervention levels of diabetes knowledge were measured using the Diabetes Knowledge Questionnaire. Mean changes in the Diabetes Knowledge Questionnaire (DKQ-24) survey from pretest to posttest indicated a significant increase in knowledge in both groups. Only the grades for the participants from the pastor-led group, however, moved from failure in knowledge to high levels of passing. One hundred percent of intervention group participants reported having read the literature. This pilot study supports the feasibility of a local Latino pastor, as a culturally consistent diabetes educator, to increase Latino parishioner's knowledge of diabetes. © 2015 Society for Public Health Education.

  4. 78 FR 57624 - Availability of a Draft Integrated Feasibility Report (Feasibility Study/Environmental Impact...

    Science.gov (United States)

    2013-09-19

    ... Study/Environmental Impact Statement/Environmental Impact Report), Los Angeles River Ecosystem Restoration Study, City of Los Angeles, Los Angeles County, CA AGENCY: Department of the Army, U.S. Army Corps... Feasibility Report (IFR), which includes a Draft Feasibility Study (FS) and Environmental Impact...

  5. Battery energy storage market feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Kraft, S. [Frost and Sullivan, Mountain View, CA (United States); Akhil, A. [Sandia National Labs., Albuquerque, NM (United States). Energy Storage Systems Analysis and Development Dept.

    1997-07-01

    Under the sponsorship of the Department of Energy`s Office of Utility Technologies, the Energy Storage Systems Analysis and Development Department at Sandia National Laboratories (SNL) contracted Frost and Sullivan to conduct a market feasibility study of energy storage systems. The study was designed specifically to quantify the energy storage market for utility applications. This study was based on the SNL Opportunities Analysis performed earlier. Many of the groups surveyed, which included electricity providers, battery energy storage vendors, regulators, consultants, and technology advocates, viewed energy storage as an important enabling technology to enable increased use of renewable energy and as a means to solve power quality and asset utilization issues. There are two versions of the document available, an expanded version (approximately 200 pages, SAND97-1275/2) and a short version (approximately 25 pages, SAND97-1275/1).

  6. 1999 LDRD Laboratory Directed Research and Development

    Energy Technology Data Exchange (ETDEWEB)

    Rita Spencer; Kyle Wheeler

    2000-06-01

    This is the FY 1999 Progress Report for the Laboratory Directed Research and Development (LDRD) Program at Los Alamos National Laboratory. It gives an overview of the LDRD Program, summarizes work done on individual research projects, relates the projects to major Laboratory program sponsors, and provides an index to the principal investigators. Project summaries are grouped by their LDRD component: Competency Development, Program Development, and Individual Projects. Within each component, they are further grouped into nine technical categories: (1) materials science, (2) chemistry, (3) mathematics and computational science, (4) atomic, molecular, optical, and plasma physics, fluids, and particle beams, (5) engineering science, (6) instrumentation and diagnostics, (7) geoscience, space science, and astrophysics, (8) nuclear and particle physics, and (9) bioscience.

  7. Aleutian Pribilof Islands Wind Energy Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Bruce A. Wright

    2012-03-27

    Under this project, the Aleutian Pribilof Islands Association (APIA) conducted wind feasibility studies for Adak, False Pass, Nikolski, Sand Point and St. George. The DOE funds were also be used to continue APIA's role as project coordinator, to expand the communication network quality between all participants and with other wind interest groups in the state and to provide continued education and training opportunities for regional participants. This DOE project began 09/01/2005. We completed the economic and technical feasibility studies for Adak. These were funded by the Alaska Energy Authority. Both wind and hydro appear to be viable renewable energy options for Adak. In False Pass the wind resource is generally good but the site has high turbulence. This would require special care with turbine selection and operations. False Pass may be more suitable for a tidal project. APIA is funded to complete a False Pass tidal feasibility study in 2012. Nikolski has superb potential for wind power development with Class 7 wind power density, moderate wind shear, bi-directional winds and low turbulence. APIA secured nearly $1M from the United States Department of Agriculture Rural Utilities Service Assistance to Rural Communities with Extremely High Energy Costs to install a 65kW wind turbine. The measured average power density and wind speed at Sand Point measured at 20m (66ft), are 424 W/m2 and 6.7 m/s (14.9 mph) respectively. Two 500kW Vestas turbines were installed and when fully integrated in 2012 are expected to provide a cost effective and clean source of electricity, reduce overall diesel fuel consumption estimated at 130,000 gallons/year and decrease air emissions associated with the consumption of diesel fuel. St. George Island has a Class 7 wind resource, which is superior for wind power development. The current strategy, led by Alaska Energy Authority, is to upgrade the St. George electrical distribution system and power plant. Avian studies in Nikolski

  8. Lunar Wireless Power Transfer Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Sheldon Freid, et al.

    2008-06-01

    This study examines the feasibility of a multi-kilowatt wireless radio frequency (RF) power system to transfer power between lunar base facilities. Initial analyses, show that wireless power transfer (WPT) systems can be more efficient and less expensive than traditional wired approaches for certain lunar and terrestrial applications. The study includes evaluations of the fundamental limitations of lunar WPT systems, the interrelationships of possible operational parameters, and a baseline design approach for a notionial system that could be used in the near future to power remote facilities at a lunar base. Our notional system includes state-of-the-art photovoltaics (PVs), high-efficiency microwave transmitters, low-mass large-aperture high-power transmit antennas, high-efficiency large-area rectenna receiving arrays, and reconfigurable DC combining circuitry.

  9. Feasibility Study for BioLEIR

    CERN Document Server

    Roy, G; Schuh, S

    2017-01-01

    The biomedical community asked CERN to investigate the possibility to transform the Low Energy Ion Ring (LEIR) accelerator into a multidisciplinary, biomedical research facil- ity (BioLEIR) that could provide ample, high-quality beams of a range of light ions suitable for clinically oriented fundamental research on cell cultures and for radiation instrumenta- tion development. BioLEIR would be operated when LEIR is not providing heavy ions for the CERN physics programme. The study group was mandated to write a Feasibility Study Report, using high-level engineering estimates based on previous experience, with the aim to: – collect the requirements for such a facility from the biomedical community in close collaboration with the International Strategy Committee for CERN Medical Applica- tions; – determine a coherent set of beam parameters, based on the requirements; – explore whether the beam requirements can be met throughout the facility, from the source to the biomedical end-stations; – perf...

  10. Feasibility Study for Paragon - Bisti Solar Ranch

    Energy Technology Data Exchange (ETDEWEB)

    Benally, Thomas [Navajo Hopi Land Commission Office (NHLCO), Window Rock, AZ (United States)

    2015-06-01

    The Navajo Hopi Land Commission Office (NHLCO) and Navajo Nation (NN) plan to develop renewable energy (RE) projects on the Paragon-Bisti Ranch (PBR) lands, set aside under the Navajo Hopi Land Settlement Act (NHLSA) for the benefit of Relocatees. This feasibility study (FS), which was funded under a grant from DOE’s Tribal Energy Program (TEP), was prepared in order to explore the development of the 22,000-acre PBR in northwestern New Mexico for solar energy facilities. Topics covered include: • Site Selection • Analysis of RE, and a Preliminary Design • Transmission, Interconnection Concerns and Export Markets • Financial and Economic Analysis • Environmental Study • Socioeconomic and Cultural Factors • Next Steps.

  11. Lunar Wireless Power Transfer Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Freid, Sheldon [National Security Technologies, LLC. (NSTec), Mercury, NV (United States); Popovic, Zoya [Univ. of Colorado, Boulder, CO (United States); Beckett, David R. [Independent Consultant; Anderson, Scott R. [Independent Consultant; Mann, Diana [Independent Consultant; Walker, Stuart [Independent Consultant

    2008-03-01

    This study examines the feasibility of a multi-kilowatt wireless radio frequency (RF) power system to transfer power between lunar base facilities. Initial analyses, show that wireless power transfer (WPT) systems can be more efficient and less expensive than traditional wired approaches for certain lunar and terrestrial applications. The study includes evaluations of the fundamental limitations of lunar WPT systems, the interrelationships of possible operational parameters, and a baseline design approach for a notionial system that could be used in the near future to power remote facilities at a lunar base. Our notional system includes state-of-the-art photovoltaics (PVs), high-efficiency microwave transmitters, low-mass large-aperture high-power transmit antennas, high-efficiency large-area rectenna receiving arrays, and reconfigurable DC combining circuitry.

  12. FY 2014 LDRD Annual Report Project Summaries

    Energy Technology Data Exchange (ETDEWEB)

    Tomchak, Dena [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-02-01

    The FY 2014 Laboratory Directed Research and Development (LDRD) Annual Report is a compendium of the diverse research performed to develop and ensure the INL's technical capabilities can support future DOE missions and national research priorities. LDRD is essential to INL - it provides a means for the laboratory to pursue novel scientific and engineering research in areas that are deemed too basic or risky for programmatic investments. This research enahnces technical capabilities at the laboratory, providing scientific and engineering staff with opportunities for skill building and partnership development.

  13. Exoskeleton for Soldier Enhancement Systems Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Jansen, J.F.

    2000-09-28

    The development of a successful exoskeleton for human performance augmentation (EHPA) will require a multi-disciplinary systems approach based upon sound biomechanics, power generation and actuation systems, controls technology, and operator interfaces. The ability to integrate key components into a system that enhances performance without impeding operator mobility is essential. The purpose of this study and report are to address the issue of feasibility of building a fieldable EHPA. Previous efforts, while demonstrating progress and enhancing knowledge, have not approached the level required for a fully functional, fieldable system. It is doubtless that the technologies required for a successful exoskeleton have advanced, and some of them significantly. The question to be addressed in this report is have they advanced to the point of making a system feasible in the next three to five years? In this study, the key technologies required to successfully build an exoskeleton have been examined. The primary focus has been on the key technologies of power sources, actuators, and controls. Power sources, including internal combustion engines, fuel cells, batteries, super capacitors, and hybrid sources have been investigated and compared with respect to the exoskeleton application. Both conventional and non-conventional actuator technologies that could impact EHPA have been assessed. In addition to the current state of the art of actuators, the potential for near-term improvements using non-conventional actuators has also been addressed. Controls strategies, and their implication to the design approach, and the exoskeleton to soldier interface have also been investigated. In addition to these key subsystems and technologies, this report addresses technical concepts and issues relating to an integrated design. A recommended approach, based on the results of the study is also presented.

  14. Technical feasibility study on polycarbonate solar panels

    Energy Technology Data Exchange (ETDEWEB)

    Hackmann, M.M.; Meuwissen, M.H.H.; Bots, T.L.; Buijs, J.A.H.M. [TNO Industrial Technology, Eindhoven (Netherlands); Broek, K.M.; Kinderman, R. [Energy Research Center of the Netherlands, Petten (Netherlands); Tanck, O.B.F.; Schuurmans, F.M. [Shell Solar Energy, Helmond (Netherlands)

    2004-10-01

    This paper describes a technical feasibility study on the application of polycarbonate (PC) plates in a superstrate photovoltaic module design. The lamination process was performed in a conventional laminator apparatus using low temperature curing (100{sup o}C) ethylene-vinyl-acetate (EVA) as the potting material and multi-crystalline silicon-solar cells. Thermo-mechanical calculations via the finite element method were performed to support the experimental results on various layer set-ups. Both experimental and numerical results revealed that PC superstrate laminates display a certain degree of warpage after the lamination process. This warpage can be attributed to stress built up in the modules due to differences in thermal expansion between solar cells and PC. This stress build-up can be diminished by application of thicker layers of PC or EVA leading to less curved laminates. (author)

  15. Bin Set 1 Calcine Retrieval Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    R. D. Adams; S. M. Berry; K. J. Galloway; T. A. Langenwalter; D. A. Lopez; C. M. Noakes; H. K. Peterson; M. I. Pope; R. J. Turk

    1999-10-01

    At the Department of Energy's Idaho Nuclear Technology and Engineering Center, as an interim waste management measure, both mixed high-level liquid waste and sodium bearing waste have been solidified by a calculation process and are stored in the Calcine Solids Storage Facilities. This calcined product will eventually be treated to allow final disposal in a national geologic repository. The Calcine Solids Storage Facilities comprise seven ''bit sets.'' Bin Set 1, the first to be constructed, was completed in 1959, and has been in service since 1963. It is the only bin set that does not meet current safe-shutdown earthquake seismic criteria. In addition, it is the only bin set that lacks built-in features to aid in calcine retrieval. One option to alleviate the seismic compliance issue is to transport the calcine from Bin Set 1 to another bin set which has the required capacity and which is seismically qualified. This report studies the feasibility of retrieving the calcine from Bi n Set 1 and transporting it into Bin Set 6 which is located approximately 650 feet away. Because Bin Set 1 was not designed for calcine retrieval, and because of the high radiation levels and potential contamination spread from the calcined material, this is a challenging engineering task. This report presents preconceptual design studies for remotely-operated, low-density, pneumatic vacuum retrieval and transport systems and equipment that are based on past work performed by the Raytheon Engineers and Constructors architectural engineering firm. The designs presented are considered feasible; however, future development work will be needed in several areas during the subsequent conceptual design phase.

  16. Simulations of the interaction of intense petawatt laser pulses with dense Z-pinch plasmas : final report LDRD 39670.

    Energy Technology Data Exchange (ETDEWEB)

    Welch, Dale Robert (Mission Research Corporation, Albuquerque, NM); MacFarlane, Joseph John (Prism Computational Sciences, Madison, WI); Mehlhorn, Thomas Alan; Campbell, Robert B.

    2004-11-01

    We have studied the feasibility of using the 3D fully electromagnetic implicit hybrid particle code LSP (Large Scale Plasma) to study laser plasma interactions with dense, compressed plasmas like those created with Z, and which might be created with the planned ZR. We have determined that with the proper additional physics and numerical algorithms developed during the LDRD period, LSP was transformed into a unique platform for studying such interactions. Its uniqueness stems from its ability to consider realistic compressed densities and low initial target temperatures (if required), an ability that conventional PIC codes do not possess. Through several test cases, validations, and applications to next generation machines described in this report, we have established the suitability of the code to look at fast ignition issues for ZR, as well as other high-density laser plasma interaction problems relevant to the HEDP program at Sandia (e.g. backlighting).

  17. Final LDRD report : advanced plastic scintillators for neutron detection.

    Energy Technology Data Exchange (ETDEWEB)

    Vance, Andrew L.; Mascarenhas, Nicholas; O' Bryan, Greg; Mrowka, Stanley

    2010-09-01

    This report summarizes the results of a one-year, feasibility-scale LDRD project that was conducted with the goal of developing new plastic scintillators capable of pulse shape discrimination (PSD) for neutron detection. Copolymers composed of matrix materials such as poly(methyl methacrylate) (PMMA) and blocks containing trans-stilbene (tSB) as the scintillator component were prepared and tested for gamma/neutron response. Block copolymer synthesis utilizing tSBMA proved unsuccessful so random copolymers containing up to 30% tSB were prepared. These copolymers were found to function as scintillators upon exposure to gamma radiation; however, they did not exhibit PSD when exposed to a neutron source. This project, while falling short of its ultimate goal, demonstrated the possible utility of single-component, undoped plastics as scintillators for applications that do not require PSD.

  18. Dual-energy in mammography: feasibility study

    Science.gov (United States)

    Jafroudi, Hamid; Lo, Shih-Chung B.; Li, Huai; Steller Artz, Dorothy E.; Freedman, Matthew T.; Mun, Seong K.

    1996-04-01

    The purpose of this work is to examine the feasibility of dual-energy techniques to enhance the detection of microcalcifications in digital mammography. The digital mammography system used in this study consists of two different mammography systems; one is the conventional mammography system with molybdenum target and Mo filtration and the other is the clinical version of a low dose x-ray system with tungsten target and aluminum filtration. The low dose system is optimized for screen-film mammography with a highly efficient scatter rejection device built by Fischer Imaging Systems for evaluation at NIH. The system was designed by the University of Southern California based on multiparameter optimization techniques. Prototypes of this system have been constructed and evaluated at the Center for Devices and Radiological Health. The digital radiography system is based on the Fuji 9000 computed radiography (CR) system which uses a storage phosphor imaging plate as the receptor. High resolution plates (HR-V) are used in this study. Dual-energy is one technique to reduce the structured noise associated with the complexity of the background of normal anatomy surrounding a lesion. This can be done by taking the advantage of the x-ray attenuation characteristics of two different structures such as soft tissue and bone in chest radiography. We have applied this technique to the detection of microcalcifications in mammography. The overall system performance based on this technique is evaluated. Results presented are based on the evaluation of phantom images.

  19. BIOMASS-TO-ENERGY FEASIBILITY STUDY

    Energy Technology Data Exchange (ETDEWEB)

    Cecil T. Massie

    2002-09-03

    The purpose of this study was to assess the economic and technical feasibility of producing electricity and thermal energy from biomass by gasification. For an economic model we chose a large barley malting facility operated by Rahr Malting Co. in Shakopee, Minnesota. This plant provides an excellent backdrop for this study because it has both large electrical loads and thermal loads that allowed us to consider a wide range of sizes and technical options. In the end, eleven scenarios were considered ranging from 3.1 megawatts (MWe) to 19.8 MWe. By locating the gasification and generation at an agricultural product processing plant with large electrical and thermal loads, the expectation was that some of the limitations of stand-alone biomass power plants would be overcome. In addition, since the process itself created significant volumes of low value biomass, the hope was that most of the biomass gathering and transport issues would be handled as well. The development of low-BTU gas turbines is expected to fill a niche between the upper limit of multiple spark ignited engine set systems around 5 MWe and the minimum reasonable scale for steam turbine systems around 10 MWe.

  20. A magnetotelluric feasibility study of the Alps

    Science.gov (United States)

    Ritter, O.; Weckmann, U.

    2016-12-01

    The Alps are a famous and extensive mountain range system in central Europe. The mountains were formed as the African and Eurasian tectonic plates collided and they have been a prime target for geological and geophysical investigations since the beginning of modern geosciences. Consequently, the Alps have been investigated with active and passive seismological methods and extensive sets of potential field data exist. Hardly anything is known, however, about the deep electrical conductivity structure, as it has been notoriously difficult to acquire magnetotelluric (MT) data in the Alps. The Alps are densely populated and a lot of infrastructure for tourism has been built over the years. MT measurements, which rely on natural variations of the electromagnetic background fields, are severely hampered by this man-made noise. Here, we report on a feasibility study to acquire MT data in the Alps, where all stations are deployed outside the valleys, on high mountain ranges and alpine pastures. Overall we recorded MT data at 7 stations, along an approximately north-south profile centred on Mayrhofen in the Austrian Alps. The average station spacing was 5 kilometers. The data were processed using robust remote-reference processing and the results clearly show that MT measurements are feasible. We used Mare2DEM for 2D inversion to include a somewhat realistic topography. The 2D section indicates moderate resistivity for the top 2 - 5 km, consistent with the regional geology, which suggests (meta-) sedimentary sequences. From depths of 5 km and below resistivities exceed 5,000 Ohmm. This means we can sense very deep with MT but also, that we should be cautious with an interpretation of this short profile. The data also clearly indicate 3D effects. We therefore propose to deploy an array of stations covering the entire Alps in USArray style, e.g. with a station spacing of approximately 50 km, to derive a 3D model of the deep electrical resistivity structure of the Alps. Such a

  1. Pinellas Plant feasibility study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-09-01

    The Pinellas Plant was built in 1956 to manufacture neutron generators, a principal component in nuclear weapons. In September 1990, the Department of Health and Rehabilitative Services (HRS) entered into an agreement with DOE to independently examine environmental monitoring data from the plant and health data from Pinellas County to determine if an epidemiological study is technically feasible to measure possible off-site health effects from ionizing radiation. Through normal plant operations, some radioactive materials have been released to the environment. Eighty percent of the total plant releases of 107,707 curies occurred in the early years of plant operation (1957--1960). The primary materials released were tritium gas, tritium oxide and krypton-85. Environmental monitoring for radioactive releases from the plant has been done regularly since 1975. The US Public Health Service Centers for Disease Control and Prevention (CDC), in assisting HRS, has determined that sufficient radiological data exist by which a dose reconstruction can be done. A dose reconstruction can provide an estimate of how much radiological exposure someone living in the vicinity of the Pinellas Plant may have suffered from environmental releases.

  2. LDRD final report : autotuning for scalable linear algebra.

    Energy Technology Data Exchange (ETDEWEB)

    Heroux, Michael Allen; Marker, Bryan (University of Texas at Austin, Austin, TX)

    2011-09-01

    This report summarizes the progress made as part of a one year lab-directed research and development (LDRD) project to fund the research efforts of Bryan Marker at the University of Texas at Austin. The goal of the project was to develop new techniques for automatically tuning the performance of dense linear algebra kernels. These kernels often represent the majority of computational time in an application. The primary outcome from this work is a demonstration of the value of model driven engineering as an approach to accurately predict and study performance trade-offs for dense linear algebra computations.

  3. Economic feasibility study for phosphorus recovery processes.

    Science.gov (United States)

    Molinos-Senante, María; Hernández-Sancho, Francesc; Sala-Garrido, Ramón; Garrido-Baserba, Manel

    2011-06-01

    Phosphorus recovery from wastewater has become a necessity for sustainable development because phosphorus is a non-renewable essential resource, and its discharge into the environment causes serious negative impacts. There are no economic incentives for the implementation of phosphorus recovery technologies because the selling price of rock phosphate is lower than phosphorus recovered from sewage. The methodologies used to determine the feasibility of such projects are usually focused on internal costs without considering environmental externalities. This article shows a methodology to assess the economic feasibility of wastewater phosphorus recovery projects that takes into account internal and external impacts. The shadow price of phosphorus is estimated using the directional distance function to measure the environmental benefits obtained by preventing the discharge of phosphorus into the environment. The economic feasibility analysis taking into account the environmental benefits shows that the phosphorus recovery is viable not only from sustainable development but also from an economic point of view.

  4. [Feasibility study for ambulatory surgery in emergency].

    Science.gov (United States)

    Franck, L; Maesani, M; Birenbaum, A; Delerme, S; Riou, B; Langeron, O; Le Saché, F

    2013-06-01

    Development of outpatient care is one of the major goals of public health policy in our country. For the purpose of this study, we set up an emergency outpatient surgery unit 24hours a day in our hospital. We assessed the feasibility of such a unit with a length of stay less than 12hours and no patient readmission. A prospective observational and monocentric study was conducted in our hospital by systematically including patients eligible for emergency surgery outpatient care. We built a database compiling patient characteristics, lengths of stay, surgical and anesthesic procedures, complications and readmission rate. Satisfaction was then assessed by the « EVAN-G » questionnaire. From May 2011 to October 2012, 147 patients were included in our research. They were 31years old [25-43]. Hundred and twenty-six of them (86%) remained in the outpatient procedure without any readmission. Twenty-one (14%) were excluded, essentially for surgical contraindications or due to the absence of an accompanying person. Length of stay was of 10.5hours [8.5-13]. The satisfaction survey showed an average score of 83/100. The setting up of an ambulatory emergency surgery unit is possible after proper training of emergency care specialists, anesthesiologists, and surgeons. This activity is compatible with safe care and a high level of patient satisfaction. It must be considered as part of the emergency procedures available and should not be systematically ruled out. Copyright © 2013 Société française d’anesthésie et de réanimation (Sfar). Published by Elsevier SAS. All rights reserved.

  5. Laser Spray Fabrication for Net-Shape Rapid Product Realization LDRD

    Energy Technology Data Exchange (ETDEWEB)

    Atwood, C.L.; Ensz, M.T.; Greene, D.L.; Griffith, M.L.; Harwell, L.D.; Jeantette, F.P.; Keicher, D.M.; Oliver, M.S.; Reckaway, D.E.; Romero, J.A.; Schlienger, M.E.; Smugeresky, J.D.

    1999-04-01

    The primary purpose of this LDRD project was to characterize the laser deposition process and determine the feasibility of fabricating complex near-net shapes directly from a CAD solid model. Process characterization provided direction in developing a system to fabricate complex shapes directly from a CAD solid model. Our goal for this LDRD was to develop a system that is robust and provides a significant advancement to existing technologies (e.g., polymeric-based rapid prototyping, laser welding). Development of the process will allow design engineers to produce functional models of their designs directly from CAD files. The turnaround time for complex geometrical shaped parts will be hours instead of days and days instead of months. With reduced turnaround time, more time can be spent on the product-design phase to ensure that the best component design is achieved. Maturation of this technology will revolutionize the way the world produces structural components.

  6. B Plant process piping replacement feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Howden, G.F.

    1996-02-07

    Reports on the feasibility of replacing existing embedded process piping with new more corrosion resistant piping between cells and between cells and a hot pipe trench of a Hanford Site style canyon facility. Provides concepts for replacement piping installation, and use of robotics to replace the use of the canyon crane as the primary means of performing/supporting facility modifications (eg, cell lining, pipe replacement, equipment reinstallation) and operational maintenenace.

  7. Feasibility study of autofluorescence mammary ductoscopy

    Science.gov (United States)

    Douplik, Alexandre; Leong, Wey L.; Easson, Alexandra M.; Done, Susan; Netchev, George; Wilson, Brian C.

    2009-07-01

    We report the technical feasibility of autofluorescence ductoscopy in the ex-vivo setting. The current imaging algorithm for visualizing tumor tissue against the normal tissue background, although developed and optimized for other organs, appears to provide discrimination between intraductal tumor and normal ductal tissue. Point fluoroscopy is also performed. Although the optical ``geometry'' for this is different, the findings are consistent with the imaging observations.

  8. LDRD Highlights at the National Laboratories

    Energy Technology Data Exchange (ETDEWEB)

    Alayat, R. A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-10-10

    To meet the nation’s critical challenges, the Department of Energy (DOE) national laboratories have always pushed the boundaries of science, technology, and engineering. The Atomic Energy Act of 1954 provided the basis for these laboratories to engage in the cutting edge of science and technology and respond to technological surprises, while retaining the best scientific and technological minds. To help re-energize this commitment, in 1991 the U.S. Congress authorized the national laboratories to devote a relatively small percentage of their budget to creative and innovative work that serves to maintain their vitality in disciplines relevant to DOE missions. Since then, this effort has been formally called the Laboratory Directed Research and Development (LDRD) Program. LDRD has been an essential mechanism to enable the laboratories to address DOE’s current and future missions with leading-edge research proposed independently by laboratory technical staff, evaluated through expert peer-review committees, and funded by the individual laboratories consistent with the authorizing legislation and the DOE LDRD Order 413.2C.

  9. Feasibility Study of Thin Film Thermocouple Piles

    Science.gov (United States)

    Sisk, R. C.

    2001-01-01

    Historically, thermopile detectors, generators, and refrigerators based on bulk materials have been used to measure temperature, generate power for spacecraft, and cool sensors for scientific investigations. New potential uses of small, low-power, thin film thermopiles are in the area of microelectromechanical systems since power requirements decrease as electrical and mechanical machines shrink in size. In this research activity, thin film thermopile devices are fabricated utilizing radio frequency sputter coating and photoresist lift-off techniques. Electrical characterizations are performed on two designs in order to investigate the feasibility of generating small amounts of power, utilizing any available waste heat as the energy source.

  10. Feasibility Study & Design of Brightfield Solar Farm

    Energy Technology Data Exchange (ETDEWEB)

    Law, Susan

    2014-09-28

    This Congressionally Directed Project originally provided funds to the Township of Lower Providence, Pennsylvania for the purpose of investigating the potential for a renewable energy generation facility to make beneficial reuse of a closed landfill located within the Township, known as Moyer Landfill. Early in the course of the project, it was determined through collaboration and discussion with DOE to alter the scope of the project to include a feasibility assessment of a landfill solar project, as well as to construct a demonstration solar project at the municipal facilities to provide an educational and community outreach opportunity for the Township to offer regarding solar photovoltaic (“PV”) electricity generation.

  11. 41 CFR 101-5.104-4 - Scheduling feasibility studies.

    Science.gov (United States)

    2010-07-01

    ... FEDERAL BUILDINGS AND COMPLEXES 5.1-General § 101-5.104-4 Scheduling feasibility studies. The schedule of feasibility studies will be coordinated by GSA with its construction, space management, and buildings... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Scheduling...

  12. Feasibility Study Contract Signed for Underground Gas Storage in Beijing

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    @@ On December 22, 2005, CNPC and Gazprom signed the feasibility study service contract on constructing the underground gas storage in Ren 11 reservoir of CNPC's Renqiu Oilfield. According to the contract terms, Gazprom will provide feasibility study services on the construction of the gas storage for CNPC. CNPC Vice President Zhou Jiping attended the signing ceremony held in Beijing.

  13. LDRD final report on new homogeneous catalysts for direct olefin epoxidation (LDRD 52591).

    Energy Technology Data Exchange (ETDEWEB)

    Goldberg, Karen (University of Washington); Smythe, Nicole A. (University of Washington); Moore, Joshua T.; Stewart, Constantine A.; Kemp, Richard Alan; Miller, James Edward; Kornienko, Alexander (New Mexico Institute of Mining and Technology); Denney, Melanie C. (University of Washington); Cetto, Kara L. (University of Washington)

    2006-02-01

    This report summarizes our findings during the study of a novel homogeneous epoxidation catalyst system that uses molecular oxygen as the oxidant, a ''Holy Grail'' in catalysis. While olefins (alkenes) that do not contain allylic hydrogens can be epoxidized directly using heterogeneous catalysts, most olefins cannot, and so a general, atom-efficient route is desired. While most of the work performed on this LDRD has been on pincer complexes of late transition metals, we also scouted out metal/ligand combinations that were significantly different, and unfortunately, less successful. Most of the work reported here deals with phosphorus-ligated Pd hydrides [(PCP)Pd-H]. We have demonstrated that molecular oxygen gas can insert into the Pd-H bond, giving a structurally characterized Pd-OOH species. This species reacts with oxygen acceptors such as olefins to donate an oxygen atom, although in various levels of selectivity, and to generate a [(PCP)Pd-OH] molecule. We discovered that the active [(PCP)Pd-H] active catalyst can be regenerated by addition of either CO or hydrogen. The demonstration of each step of the catalytic cycle is quite significant. Extensions to the pincer-Pd chemistry by attaching a fluorinated tail to the pincer designed to be used in solvents with higher oxygen solubilities are also presented.

  14. CE: Defining and Understanding Pilot and Other Feasibility Studies.

    Science.gov (United States)

    Morris, Nancy S; Rosenbloom, Deborah A

    2017-03-01

    : Nurses are becoming increasingly involved in conducting clinical research in which feasibility studies are often the first steps. Understanding why and how these studies are conducted may encourage clinical nurses to engage with researchers and take advantage of opportunities to participate in advancing nursing science. This article provides an overview of feasibility studies, including pilot studies, and explains the type of preliminary data they seek to provide in order to make larger, future studies more efficient and successful. By way of example, the authors discuss a feasibility study they conducted that illustrates the key components and necessary steps involved in such work.

  15. Feasibility of Diagnostics Undulator Studies at ASTA

    CERN Document Server

    Lumpkin, A H; Byrd, J M

    2014-01-01

    The Advanced Superconducting Test Accelerator (ASTA) facility is currently under construction at Fermilab. With a 1-ms macropulse composed of up to 3000 micropulses and with beam energies projected from 45 to 800 MeV, the need for non-intercepting diagnostics for beam size, position, energy, and bunch length is clear. In addition to the rf BPMs, optical synchrotron radiation (OSR), and optical diffraction radiation (ODR) techniques already planned, we propose the use of undulator radiation from a dedicated device for diagnostics. with a nominal period of 4-5 cm, a tunable field parameter K, and a length of several meters. The feasibility of extending such techniques in the visible regime at a beam energy of 125 MeV into the UV and VUV regimes with beam energies of 250 and 500 MeV will be presented.

  16. Feasibility study of a 200 ampere battery

    Science.gov (United States)

    Baldwin, A. R.

    1991-06-01

    The results of a Sandia National Laboratories program to design and develop a high-current thermal battery for the Hypersonic Weapons Technology Program are presented. The feasibility of a 200 A, 150 s, 12 Vdc primary battery was demonstrated under ambient conditions. New header feedthrough design concepts were used, and new internal current collectors and internal power leads were considered. The Li(Si)/LiBr-LiCl-LiF/FeS2 electrochemical system has shown exceptional performance at the high-current operation conditions. A high-rate Zinc/Silver Oxide secondary cell was also evaluated, and the results are presented in this report. These cells exhibited excellent high-rate discharge performance.

  17. Co-combustion feasibility study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Handcock, D.J. [Clough, Harbour and Associates, Albany, NY (United States)

    1995-01-01

    This report investigates the technical and economic feasibility of co-combusting municipal sewage sludge produced by the Saratoga County Sewer District No. 1 with paper mill sludge produced by the Cottrell Paper Company, Encore Paper Company, International Paper Company, Mohawk Paper Mills, and TAGSONS Papers at the Saratoga County Sewer District No. 1`s secondary wastewater treatment plant and recovering any available energy products. The co-combustion facility would consist of sludge and wood chip storage and conveying systems, belt filter presses, screw presses, fluidized-bed incinerators, venturi scrubbers and tray cooling systems, ash dewatering facilities, heat recovery steam generators, gas-fired steam superheaters, and a back-pressure steam turbine system. Clean waste wood chips would be used as an auxiliary fuel in the fluidized-bed incinerators. It is recommended that the ash produced by the proposed facility be beneficially used, potentially as a raw material in the manufacture of cement and/or as an interim barrier layer in landfills.

  18. Feasibility study of the AOSTA experimental campaign

    Directory of Open Access Journals (Sweden)

    Carta M.

    2016-01-01

    Full Text Available The reduction of the nuclear waste is one of the most important nuclear issues. The high radiotoxicity of the spent fuel is due to plutonium and some minor actinides (MAs such as neptunium, americium and curium, above all. One way to reduce their hazard is to destroy by fission MAs in appropriate nuclear reactors. To allow the MAs destruction an important effort have been done on the nuclear data due to the poor knowledge in this field. In the framework of one of the NEA Expert Group on Integral Experiments for Minor Actinide Management an analysis of the feasibility of MAs irradiation campaign in the TAPIRO fast research reactor is carried out. This paper provides preliminary results obtained by calculations modelling the irradiation, in different TAPIRO irradiation channels, of some CEA samples coming from the French experimental campaign OSMOSE, loaded with different contents of MAs, in order to access, through particular peak spectrometry, to their capture cross section. On the basis of neutron transport calculation results, obtained by both deterministic and Monte Carlo methods, an estimate of the irradiated samples counting levels from the AOSTA (Activation of OSMOSE Samples in TAPIRO experimental campaign is provided.

  19. Sedimentary Geothermal Feasibility Study: October 2016

    Energy Technology Data Exchange (ETDEWEB)

    Augustine, Chad [National Renewable Energy Lab. (NREL), Golden, CO (United States); Zerpa, Luis [Colorado School of Mines, Golden, CO (United States)

    2017-01-01

    The objective of this project is to analyze the feasibility of commercial geothermal projects using numerical reservoir simulation, considering a sedimentary reservoir with low permeability that requires productivity enhancement. A commercial thermal reservoir simulator (STARS, from Computer Modeling Group, CMG) is used in this work for numerical modeling. In the first stage of this project (FY14), a hypothetical numerical reservoir model was developed, and validated against an analytical solution. The following model parameters were considered to obtain an acceptable match between the numerical and analytical solutions: grid block size, time step and reservoir areal dimensions; the latter related to boundary effects on the numerical solution. Systematic model runs showed that insufficient grid sizing generates numerical dispersion that causes the numerical model to underestimate the thermal breakthrough time compared to the analytic model. As grid sizing is decreased, the model results converge on a solution. Likewise, insufficient reservoir model area introduces boundary effects in the numerical solution that cause the model results to differ from the analytical solution.

  20. Washoe Tribe Alternative Energy Feasibility Study Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, Jennifer [Washoe Tribe of NV and CA

    2014-10-01

    The Washoe Tribe of Nevada and California was awarded funding to complete the Washoe Tribe Alternative Energy Feasibility Study project. The main goal of the project was to complete an alternative energy feasibility study. This study was completed to evaluate “the potential for development of a variety of renewable energy projects and to conduct an alternative energy feasibility study that determines which alternative energy resources have the greatest economic opportunity for the Tribe, while respecting cultural and environmental values” (Baker-Tilly, 2014). The study concluded that distributed generation solar projects are the best option for renewable energy development and asset ownership for the Washoe Tribe. Concentrating solar projects, utility scale wind projects, geothermal, and biomass resource projects were also evaluated during the study and it was determined that these alternatives would not be feasible at this time.

  1. A Successful International Cooperation-Enhancing Oil Recovery Feasibility Study

    Institute of Scientific and Technical Information of China (English)

    Wang Dechen

    1994-01-01

    @@ In 1985 Yumen Petroleum Administration Bureau and Institute Francais du Petrole signed a science-technology cooperation agreement on surface active agent-polymer flood feasibility study in the reservoir L of Laojunmiao Oilfield.

  2. Final Report: Feasibility Study of Biomass in Snohomish County, Washington

    Energy Technology Data Exchange (ETDEWEB)

    Daryl Williams (Tulalip Tribes); Ray Clark (Clark Group)

    2005-01-31

    This report and its attachments summarizes the results of a unique tribal-farmer cooperative study to evaluate the feasibility of building one or more regional anaerobic digestion systems in Snohomish County, Washington.

  3. Ute Mountain Ute Tribe Community-Scale Solar Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Rapp, Jim [Parametrix; Knight, Tawnie [Ute Mountain Ute Tribe

    2014-01-30

    Parametrix Inc. conducted a feasibility study for the Ute Mountain Ute Tribe to determine whether or not a community-scale solar farm would be feasible for the community. The important part of the study was to find where the best fit for the solar farm could be. In the end, a 3MW community-scale solar farm was found best fit with the location of two hayfield sites.

  4. Feasibility study: Assess the feasibility of siting a monitored retrievable storage facility. Phase 1

    Energy Technology Data Exchange (ETDEWEB)

    King, J.W.

    1993-08-01

    The purpose of phase one of this study are: To understand the waste management system and a monitored retrievable storage facility; and to determine whether the applicant has real interest in pursuing the feasibility assessment process. Contents of this report are: Generating electric power; facts about exposure to radiation; handling storage, and transportation techniques; description of a proposed monitored retrievable storage facility; and benefits to be received by host jurisdiction.

  5. 2014 SRNL LDRD Annual Report, Rev. 0

    Energy Technology Data Exchange (ETDEWEB)

    Mcwhorter, S. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-03-15

    Laboratory Directed Research and Development is a congressionally authorized program that provides the ‘innovation inspiration’ from which many of the Laboratory’s multi-discipline advancements are made in both science and engineering technology. The program is the backbone for insuring that scientific, technical and engineering capabilities can meet current and future needs. It is an important tool in reducing the probability of technological surprise by allowing laboratory technical staff room to innovate and keep abreast of scientific breakthroughs. Drawing from the synergism among the EM and NNSA missions, and work from other federal agencies ensures that LDRD is the key element in maintaining the vitality of SRNL’s technical programs. The LDRD program aims to position the Laboratory for new business in clean energy, national security, nuclear materials management and environmental stewardship by leveraging the unique capabilities of the Laboratory to yield foundational scientific research in core business areas, while aligning with SRS strategic initiatives and maintaining a vision for ultimate DOE applications.

  6. LDRD final report on new homogeneous and supported oligomerization catalysts (LDRD 42461).

    Energy Technology Data Exchange (ETDEWEB)

    Hascall, Anthony G.; Kemp, Richard Alan

    2004-11-01

    The overall purpose of this LDRD is multifold. First, we are interested in preparing new homogeneous catalysts that can be used in the oligomerization of ethylene and in understanding commercially important systems better. Second, we are interested in attempting to support these new homogeneous catalysts in the pores of nano- or mesoporous materials in order to force new and unusual distributions of a-olefins to be formed during the oligomerization. Thus the overall purpose is to try to prepare new catalytic species and to possibly control the active site architecture in order to yield certain desired products during a catalytic reaction, much like nature does with enzymes. In order to rationally synthesize catalysts it is imperative to comprehend the function of the various components of the catalyst. In heterogeneous systems, it is of utmost importance to know how a support interacts with the active site of the catalyst. In fact, in the catalysis world this lack of fundamental understanding of the relationship between active site and support is the single largest reason catalysis is considered an 'empirical' or 'black box' science rather than a well-understood one. In this work we will be preparing novel ethylene oligomerization catalysts, which are normally P-O chelated homogeneous complexes, with new ligands that replace P with a stable carbene. We will also examine a commercially catalyst system and investigate the active site in it via X-ray crystallography. We will also attempt to support these materials inside the pores of nano- and mesoporous materials. Essentially, we will be tailoring the size and scale of the catalyst active site and its surrounding environment to match the size of the molecular product(s) we wish to make. The overall purpose of the study will be to prepare new homogeneous catalysts, and if successful in supporting them to examine the effects that steric constraints and pore structures can have on growing oligomer

  7. Wind Generation Feasibility Study in Bethel, AK

    Energy Technology Data Exchange (ETDEWEB)

    Tom Humphrey, YKHC; Lance Kincaid, EMCOR Energy & Technologies

    2004-07-31

    This report studies the wind resources in the Yukon-Kuskokwim Health Corporation (YKHC) region, located in southwestern Alaska, and the applicability of wind generation technologies to YKHC facilities.

  8. Technical feasibility study of Voltage Optimization Unit

    DEFF Research Database (Denmark)

    Hu, Junjie; Marinelli, Mattia; Coppo, Massimiliano

    transformer with OLTC per phase is necessary and valuable. The main conclusion is that power distribution transformer with OLTC control on each phase can significantly improve the PV hosting capacity in the analyzed unbal-anced scenarios. To investigate the verification problem, a simulation study...... is performed using the soft-wares DigSilent PowerFactory and Matlab. In this simulation study, a real low voltage network from Dong Eldistribution is modeled in Powerfactory. The measured data of the real low voltage network is analyzed and the resulting loading profiles including active and reactive power...... are used as load basics for the analysis. In term of PV genera-tion profiles, a realistic PV output power is assumed. Four relevant indicies such as phase neutral voltage, netural potential voltage, unbalanced factor (VUF), and power losses are evaluated in the present study. The simulation tests include...

  9. Feasibility Study B-1 Power Controller.

    Science.gov (United States)

    1979-11-01

    Study performed by the Autonetics Strategic Systems Division ( ASSD ) of Rockwell International on Contract N62269-79-C-0294. The objective of this study...Modify the design of the ASSD B-1 SSPC, Part Number 12880-507-1, to be a 115 Vac quadruple SSPC unit, with a SOSTEL compatible interface. 3.1.2 115 Vac...Primary Power Modifications. The ASSD SSPC Unit, Appendix A, contains four identical PC’s operating from 230 Vac primary power. Referring to Figure 1

  10. World Languages and Cultures Feasibility Study

    Science.gov (United States)

    Sklarz, David P.

    2013-01-01

    The purpose of the study was to conduct a comprehensive review of the research and best practices of exemplary elementary school World Language and Culture Programs. Specifically, (1) to assess the degree to which various program designs had most closely met the measurable goals of the American Council of Teachers of a Foreign Language, commonly…

  11. Feasibility studies for GPD's measurement at COMPASS

    CERN Document Server

    Marroncle, J

    2004-01-01

    Deeply Virtual Compton Scattering is a clean way to access the Generalized Parton Distributions of the proton. This paper deals with a possibility to perform such an experiment with the COMPASS apparatus which allows to access a large rang in $x_{Bj}$(0.03 to 0.25) and $Q^{2}$(1.5 to 7.5 GeV$^{2}$). A possible design for a recoil detector which is necessary to complement the COMPASS setup, is presented. Preliminary results on exclusive $]rho^{0}$ production from the COMPASS 2002 run are given. They look promising for future studies of deep $\\rho^{0}$ production.

  12. High Falls Hydroelectric Plant feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Diezemann, Gustav A.

    1979-07-01

    This study was made in order to determine if re-activating the retired High Falls Hydro Station in New York would result in a more economical generation of some of the power required in the Central Hudson System than is being obtained with the oil-burning thermal plants. The findings show that the construction of a new plant is more economical than rehabilitation of the existing station. All new construction schemes are marginally unattractive at today's costs but are found to become profitable within a short period as alternative energy sources escalate in price. A new powerhouse with an installed capacity of 2390 kW proved most economical, and its construction is recommended.

  13. CsIX/TRU Grout Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    S. J. Losinski; C. M. Barnes; B. K. Grover

    1998-11-01

    A settlement agreement between the Department of Energy (DOE) and the State of Idaho mandates that liquid waste now stored at the Idaho Nuclear Technology Engineering Center (INTEC - formerly the Idaho Chemical Processing Plant, ICPP) will be calcined by the end of year 2012. This study investigates an alternative treatment of the liquid waste that removes undissolved solids (UDS) by filtration and removes cesium by ion exchange followed by cement-based grouting of the remaining liquid into 55-gal drums. Operations are assumed to be from January 2008 through December 2012. The grouted waste will be contact-handled and will be shipped to the Waste Isolation Pilot Plant (WIPP) in New Mexico for disposal. The small volume of secondary wastes such as the filtered solids and cesium sorbent (resin) would remain in storage at the Idaho National Engineering and Environmental Laboratory for treatment and disposal under another project, with an option to dispose of the filtered solids as a r emote-handled waste at WIPP.

  14. Feasibility Studies on Si-Based Biosensors

    Directory of Open Access Journals (Sweden)

    Marcella Renis

    2009-05-01

    Full Text Available The aim of this paperis to summarize the efforts carried out so far in the fabrication of Si-based biosensors by a team of researchers in Catania, Italy. This work was born as a collaboration between the Catania section of the Microelectronic and Microsystem Institute (IMM of the CNR, the Surfaces and Interfaces laboratory (SUPERLAB of the Consorzio Catania Ricerche and two departments at the University of Catania: the Biomedical Science and the Biological Chemistry and Molecular Biology Departments. The first goal of our study was the definition and optimization of an immobilization protocol capable of bonding the biological sensing element on a Si-based surface via covalent chemical bonds. We chose SiO2 as the anchoring surface due to its biocompatibility and extensive presence in microelectronic devices. The immobilization protocol was tested and optimized, introducing a new step, oxide activation, using techniques compatible with microelectronic processing. The importance of the added step is described by the experimental results. We also tested different biological molecule concentrations in the immobilization solutions and the effects on the immobilized layer. Finally a MOS-like structure was designed and fabricated to test an electrical transduction mechanism. The results obtained so far and the possible evolution of the research field are described in this review paper.

  15. Hydrogen train : the Danish feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Torbensen, C. [Hydrogen Innovation and Research Centre, Copenhagen (Denmark)

    2007-07-01

    This paper discussed a hydrogen train demonstration track in western Denmark. The study focused on the overall drivers for implementing hydrogen technology in the region. High oil prices and growing concerns over anthropogenic climate change have led to a search for alternative forms of fuel for railways. More than 60 per cent of railways lines are dependent on diesel fuel, and the capital costs for conversion to electricity are high. The environmental benefits of switching from diesel to hydrogen include reduced local pollution at stations and along the railway line, reductions in noise levels, and increases in energy efficiency. The aesthetic impacts and potential danger of overhead electrical lines in urban areas will also be avoided by using hydrogen trains. The hydrogen-run trains are expected to reduce greenhouse gases (GHGs) and the social costs of increased pollution. However, a demonstration hydrogen commuter train will cost twice as much as a diesel train. It was concluded that the implementation of a hydrogen railway in the region will result in reduced overall maintenance costs and fewer overhauls related to emission control systems. 1 fig.

  16. Exploration of cloud computing late start LDRD #149630 : Raincoat. v. 2.1.

    Energy Technology Data Exchange (ETDEWEB)

    Echeverria, Victor T.; Metral, Michael David; Leger, Michelle A.; Gabert, Kasimir Georg; Edgett, Patrick Garrett; Thai, Tan Q.

    2010-09-01

    This report contains documentation from an interoperability study conducted under the Late Start LDRD 149630, Exploration of Cloud Computing. A small late-start LDRD from last year resulted in a study (Raincoat) on using Virtual Private Networks (VPNs) to enhance security in a hybrid cloud environment. Raincoat initially explored the use of OpenVPN on IPv4 and demonstrates that it is possible to secure the communication channel between two small 'test' clouds (a few nodes each) at New Mexico Tech and Sandia. We extended the Raincoat study to add IPSec support via Vyatta routers, to interface with a public cloud (Amazon Elastic Compute Cloud (EC2)), and to be significantly more scalable than the previous iteration. The study contributed to our understanding of interoperability in a hybrid cloud.

  17. Chinese/Japanese Input Feasibility Study. Final Technical Report.

    Science.gov (United States)

    Desautels, John E.; And Others

    A study was conducted to determine the feasibility of developing an automatic Chinese/Japanese input device for a machine translation complex. A specific scanning technique to digitize Chinese/Japanese ideographs is recommended as a result of the study. Results of the study include specification of the resolution necessary to successfully digitize…

  18. Universal bioprocessor LDRD final report.

    Energy Technology Data Exchange (ETDEWEB)

    Luongo, Kenneth N., 1960- (.,; -); Reichmuth, David S.; Cummings, Eric B.; Krafcik, Karen L.; Davalos, Rafael V.; Sabounchi, Poorya; Simmons, Blake Alexander; Syed, Yusef; Ponce, Pierre; Salmi, Allen J.; VandeVreugde, James E.

    2006-11-01

    Microsystems pose unparalleled opportunity in the realm of real-time sample analysis for multiple applications, including Homeland Security monitoring devices, environmental monitoring, and biomedical diagnostics. The need for a universal means of processing, separating, and delivering a sample within these devices is a critical need if these systems are to receive widespread implementation in the industry and government sectors. Efficient particle separation and enrichment techniques are critical for a range of analytical functions including pathogen detection, sample preparation, high-throughput particle sorting, and biomedical diagnostics. Previously, using insulator-based dielectrophoresis (iDEP) in microfluidic glass devices, we demonstrated simultaneous particle separation and concentration. As an alternative to glass, we evaluate the performance of similar iDEP structures produced in polymer-based microdevices and their enhancement through dynamic surface coatings. There are numerous processing and operational advantages that motivate our transition to polymers such as the availability of numerous innate chemical compositions for tailoring performance, mechanical robustness, economy of scale, and ease of thermoforming and mass manufacturing. The polymer chips we have evaluated are fabricated through an injection molding process of the commercially available cyclic olefin copolymer Zeonor{reg_sign}. We demonstrate that the polymer devices achieve the same performance metrics as glass devices. Additionally, we show that the nonionic block copolymer surfactant Pluronic F127 has a strong interaction with the cyclic olefin copolymer at very low concentrations, positively impacting performance by decreasing the magnitude of the applied electric field necessary to achieve particle trapping. The presence of these dynamic surface coatings, therefore, lowers the power required to operate such devices and minimizes Joule heating. The results of this study demonstrate

  19. The environmental energy sector programme. Poland: Feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-07-01

    The Danish Ministry of Energy has granted financial aid to the preparation of a feasibility study necessary for the procurement of a financial solution to the modernisation of the combined heat and power plant in the city of Zielona Gora.The overall objectives of the Feasibility Study are to: establish new efficient power capacity in the south-west region of Poland, increase the energy efficiency, reduce the impact on the environment, utilise the local natural gas available which cannot be used in the national gas grid and reduce the costs of energy supply.The specific objective of this feasibility study is to obtain the best possible financing of the erection of a new CPH plant in Zielona Gora. The plant shall be designed to utilise the local resources of natural gas and to supply heat to the district heating grid in accordance with long-term planning strategies. (EHS)

  20. Computational Biology: A Strategic Initiative LDRD

    Energy Technology Data Exchange (ETDEWEB)

    Barksy, D; Colvin, M

    2002-02-07

    The goal of this Strategic Initiative LDRD project was to establish at LLNL a new core capability in computational biology, combining laboratory strengths in high performance computing, molecular biology, and computational chemistry and physics. As described in this report, this project has been very successful in achieving this goal. This success is demonstrated by the large number of referred publications, invited talks, and follow-on research grants that have resulted from this project. Additionally, this project has helped build connections to internal and external collaborators and funding agencies that will be critical to the long-term vitality of LLNL programs in computational biology. Most importantly, this project has helped establish on-going research groups in the Biology and Biotechnology Research Program, the Physics and Applied Technology Directorate, and the Computation Directorate. These groups include three laboratory staff members originally hired as post-doctoral researchers for this strategic initiative.

  1. Small space object imaging : LDRD final report.

    Energy Technology Data Exchange (ETDEWEB)

    Ackermann, Mark R.; Valley, Michael T.; Kearney, Sean Patrick

    2009-10-01

    We report the results of an LDRD effort to investigate new technologies for the identification of small-sized (mm to cm) debris in low-earth orbit. This small-yet-energetic debris presents a threat to the integrity of space-assets worldwide and represents significant security challenge to the international community. We present a nonexhaustive review of recent US and Russian efforts to meet the challenges of debris identification and removal and then provide a detailed description of joint US-Russian plans for sensitive, laser-based imaging of small debris at distances of hundreds of kilometers and relative velocities of several kilometers per second. Plans for the upcoming experimental testing of these imaging schemes are presented and a preliminary path toward system integration is identified.

  2. Neurons to algorithms LDRD final report.

    Energy Technology Data Exchange (ETDEWEB)

    Rothganger, Fredrick H.; Aimone, James Bradley; Warrender, Christina E.; Trumbo, Derek

    2013-09-01

    Over the last three years the Neurons to Algorithms (N2A) LDRD project teams has built infrastructure to discover computational structures in the brain. This consists of a modeling language, a tool that enables model development and simulation in that language, and initial connections with the Neuroinformatics community, a group working toward similar goals. The approach of N2A is to express large complex systems like the brain as populations of a discrete part types that have specific structural relationships with each other, along with internal and structural dynamics. Such an evolving mathematical system may be able to capture the essence of neural processing, and ultimately of thought itself. This final report is a cover for the actual products of the project: the N2A Language Specification, the N2A Application, and a journal paper summarizing our methods.

  3. 78 FR 23941 - Pilot Program for Early Feasibility Study Investigational Device Exemption Applications...

    Science.gov (United States)

    2013-04-23

    ... HUMAN SERVICES Food and Drug Administration Pilot Program for Early Feasibility Study Investigational... the Early Feasibility Study Investigational Device Exemption (IDE) Applications pilot program to May 8... ``Investigational Device Exemptions (IDE) for Early Feasibility Medical Device Clinical Studies, Including...

  4. 78 FR 60291 - Investigational Device Exemptions for Early Feasibility Medical Device Clinical Studies...

    Science.gov (United States)

    2013-10-01

    ... ``Investigational Device Exemptions (IDEs) for Early Feasibility Medical Device Clinical Studies, Including Certain... facilitate early feasibility studies of medical devices, using appropriate risk mitigation strategies, under the IDE regulations. Early feasibility studies allow for limited early clinical evaluations of...

  5. 75 FR 80827 - Compliance Policy Guide; Radiofrequency Identification Feasibility Studies and Pilot Programs for...

    Science.gov (United States)

    2010-12-23

    ...; Radiofrequency Identification Feasibility Studies and Pilot Programs for Drugs; Notice To Extend Expiration Date...) Sec. 400.210 entitled ``Radiofrequency Identification (RFID) Feasibility Studies and Pilot Programs... ``Radiofrequency Identification (RFID) Feasibility Studies and Pilot Programs for Drugs.'' Previous extensions...

  6. Feature-Oriented Domain Analysis (FODA) Feasibility Study

    Science.gov (United States)

    1990-11-01

    S’S E L EJC rF MAY 2 4 199 C Feature-Oriented Domain Analysis ( FODA ) Feasibility Study Kyo C. Kang Sholom G. Cohen James A. Hess William E. Novak A...Oriented Domain Analysis ( FODA ) Feasibility Study Kyo C. Kang Sholom G. Cohen James A. Hess William E. Novak A. Spencer Peterson Domain Analysis Project...2.2.3. CTA Work 16 2.2.4. SPS Work 18 3. Overview of the Feature-Oriented Domain Analysis ( FODA ) Method 21 3.1. Method Concepts 21 3.1.1. Modelling

  7. Feasibility study to establish a new value chain

    DEFF Research Database (Denmark)

    Ingrid Herman, Marie; Thai, Thi Minh

    and starting to valorize New Caledonian horticulture on international markets. Once goals were understood, four interrelated analyses were conducted continuously: enabling environment, productivity, structuration, and feasibility analysis. In the enabling environment, analysis of market, institution......Since the 90s value chain (VC) approaches have received considerable attention by governments and development agencies for poverty reduction and strengthening the private sector. VC analysis has been used for developing intervention strategies to upgrade existing or to establish new VCs. Despite...... a massive number of frameworks and guidelines for VC analysis for upgrading existing VCs, there is no single recommendation on conducting feasibility studies for developing new ones. Addressing this issue, we undertook a feasibility study for developing a cut foliage VC based on wild...

  8. Reflection seismology systems for planetary geology: A feasibility study

    NARCIS (Netherlands)

    Batenburg, P.A.W.; Gill, E.K.A.; Drijkoningen, G.G.; Foing, B.H.; Toxopeus, G.

    2009-01-01

    A feasibility study is conducted to determine whether reflection seismology systems can be used for planetary geology research. The focus is on systems with up to 20,000 seismic detectors, such as used today in Earth geological research and energy companies. The study follows a top-down systems engi

  9. MICROCRM: Feasibility certification studies of microbiological reference materials

    NARCIS (Netherlands)

    Mooijman KA; Nagelkerke NJD; Demarquilly C; Lemdani M; Stewardson D; Fouweather T; Lightfoot N; Simonart T; MGB

    2004-01-01

    In 2002 feasibility certification studies were carried out on three different types of microbiological reference materials for eight different ISO and EN standard methods, related to EU water legislation (Drinking-water Directive and Bathing-water Directive). These studies were performed as part of

  10. 75 FR 47525 - Notice of Funding Availability (NOFA) for Renewable Energy Feasibility Studies Grants Under the...

    Science.gov (United States)

    2010-08-06

    ... Feasibility Studies Grants Under the Rural Energy for America Program AGENCY: Rural Business-Cooperative... development assistance; and grants for conducting renewable energy feasibility studies. The Agency is...; Energy audit and renewable energy development assistance grants; and Renewable energy feasibility...

  11. Deschutes estuary feasibility study: hydrodynamics and sediment transport modeling

    Science.gov (United States)

    George, Douglas A.; Gelfenbaum, Guy; Lesser, Giles; Stevens, Andrew W.

    2006-01-01

    Continual sediment accumulation in Capitol Lake since the damming of the Deschutes River in 1951 has altered the initial morphology of the basin. As part of the Deschutes River Estuary Feasibility Study (DEFS), the United States Geological Survey (USGS) was tasked to model how tidal and storm processes will influence the river, lake and lower Budd Inlet should estuary restoration occur. Understanding these mechanisms will assist in developing a scientifically sound assessment on the feasibility of restoring the estuary. The goals of the DEFS are as follows. - Increase understanding of the estuary alternative to the same level as managing the lake environment.

  12. Ear-EEG from generic earpieces: A feasibility study

    DEFF Research Database (Denmark)

    Kidmose, Preben; Looney, D; Jochumsen, Lars

    2013-01-01

    key patient needs (discreet, unobstrusive, user-friendly, robust) and that is low-cost and suitable for off-the-shelf use; thus promising great advantages for healthcare applications. Its feasibility is validated in a comprehensive comparative study with our established prototype, based...

  13. Feasibility Studies of Exclusive Diffractive Bremsstrahlung Measurement at RHIC Energies

    OpenAIRE

    Chwastowski, Janusz; Cyz, Antoni; Fulek, Łukasz; Kycia, Radosław; Pawlik, Bogdan; Sikora, Rafał; Turnau, Jacek

    2015-01-01

    Feasibility studies of an observation of the exclusive diffractive bremsstrahlung at RHIC at $\\sqrt{s} = 200$~GeV and at $\\sqrt{s} = 500$~GeV are reported. A simplified approach to the photon and the scattered proton energy reconstruction is used. Influence of possible backgrounds is discussed.

  14. Final Technical Report: Renewable Energy Feasibility Study and Resources Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Rivero, Mariah [BEC Environmental, Inc., Las Vegas, NV (United States)

    2016-02-28

    In March 2011, the U.S. Department of Energy (DOE) awarded White Pine County, Nevada, a grant to assess the feasibility of renewable resource-related economic development activities in the area. The grant project included a public outreach and training component and was to include a demonstration project; however, the demonstration project was not completed due to lack of identification of an entity willing to locate a project in White Pine County. White Pine County completed the assessment of renewable resources and a feasibility study on the potential for a renewable energy-focused economic sector within the County. The feasibility study concluded "all resources studied were present and in sufficient quantity and quality to warrant consideration for development" and there were varying degrees of potential economic impact based on the resource type and project size. The feasibility study and its components were to be used as tools to attract potential developers and other business ventures to the local market. White Pine County also marketed the County’s resources to the renewable energy business community in an effort to develop contracts for demonstration projects. The County also worked to develop partnerships with local educational institutions, including the White Pine County School District, conducted outreach and training for the local community.

  15. The environmental energy sector programme. Poland: Appendices to feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-07-01

    The appendices contain Energy Law, Act of 10 April 1997 and also more specific details from the feasibility study for the procurement of a financial solution to the modernisation of the combined heat and power plant in the city of Zielona Gora, Poland. (EHS)

  16. Small modular biopower initiative Phase 1 feasibility studies executive summaries

    Energy Technology Data Exchange (ETDEWEB)

    Bain, R.

    2000-03-06

    The Phase 1 objective is a feasibility study that includes a market assessment, resource assessment, preliminary system design, and assessment of relevant environmental and safety considerations, and evaluation of financial and cost issues, and a preliminary business plan and commercialization strategy. Each participating company will share at least 20% of the cost of the first phase.

  17. Hadoop for EEG Storage and Processing: A Feasibility Study

    NARCIS (Netherlands)

    Berrada, Ghita; Keulen, van Maurice; Habib, Mena B.; Slezak, Dominik; Tan, Ah-Hwee; Peters, James F.; Schwabe, Lars

    2014-01-01

    Lots of heterogeneous complex data are collected for diagnosis purposes. Such data should be shared between all caregivers and, often at least partly automatically processed, due to its complexity, for its full potential to be harnessed. This paper is a feasibility study that assesses the potential

  18. Ear-EEG from generic earpieces: A feasibility study

    DEFF Research Database (Denmark)

    Kidmose, Preben; Looney, D; Jochumsen, Lars

    2013-01-01

    key patient needs (discreet, unobstrusive, user-friendly, robust) and that is low-cost and suitable for off-the-shelf use; thus promising great advantages for healthcare applications. Its feasibility is validated in a comprehensive comparative study with our established prototype, based...

  19. Hadoop for EEG Storage and Processing: A Feasibility Study

    NARCIS (Netherlands)

    Berrada, Ghita; van Keulen, Maurice; Habib, Mena Badieh; Slezak, Dominik; Tan, Ah-Hwee; Peters, James F.; Schwabe, Lars

    2014-01-01

    Lots of heterogeneous complex data are collected for diagnosis purposes. Such data should be shared between all caregivers and, often at least partly automatically processed, due to its complexity, for its full potential to be harnessed. This paper is a feasibility study that assesses the potential

  20. A Feasibility Study of Youth Apprenticeship in Arkansas.

    Science.gov (United States)

    Jobs for the Future, Inc., West Somerville, MA.

    A study assessed the feasibility and attractiveness of youth apprenticeship in Arkansas in over 80 interviews with employers in 5 key Arkansas industries and occupations. They were allied health, food processing (equipment repair and maintenance and lab technician/quality control), information services, metalworking, and self-employment and…

  1. Feasibility Study of the Social Enterprise Intervention with Homeless Youth

    Science.gov (United States)

    Ferguson, Kristin M.; Xie, Bin

    2008-01-01

    Objective: To reduce mental health symptoms and high-risk behaviors and increase social support and service utilization among street-living youth, the authors conducted a pilot study to assess the feasibility of the social enterprise intervention (SEI) at a homeless youth agency. Method: Convenience sampling was used to recruit 16 street-living…

  2. Staging and storage facility feasibility study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Swenson, C.E. [Westinghouse Hanford Co., Richland, WA (United States)

    1995-02-01

    This study was performed to investigate the feasibility of adapting the design of the HWVP Canister Storage Building (CSB) to meet the needs of the WHC Spent Nuclear Fuel Project for Staging and Storage Facility (SSF), and to develop Rough Order of Magnitude (ROM) cost and schedule estimates.

  3. Feasibility study on small modular reactors for modern microgrids

    Energy Technology Data Exchange (ETDEWEB)

    Islam, R.; Gabbar, H.A., E-mail: hossam.gabbar@uoit.ca [Univ. of Ontario Inst. of Technology, Faculty of Energy Systems and Nuclear Science, Oshawa, Ontario (Canada)

    2013-07-01

    Microgrid is a solution of conventional power grid problem and offer sustainable decentralized power system. Microgrid with modern distributed energy resources (DER) could play an important role to alleviate dependency on the main electricity grid. Distributed energy resource comprises wind turbine, solar photovoltaic, diesel generator, gas engine, micro turbine, fuel cells, etc.Due to the gap between typical loads and supply within microgrid, larger scale energy generation could provide a possible solution to balance power demand and supply. Feasibility study of Small Nuclear Power Plant, such as Small Modular reactor (SMR), within microgrids could be achieved via different cases. To achieve the target, a comprehensive feasibility study is conducted on microgrid with SMR through electricity generation profiles, geographical and environmental assessment, as well as cost analysis using simulation practices and data analysis.Also potency of SMRs is analyzed. Parameters and Key Performance Indicators (KPIs) could be analyzed to achieve feasible solution of microgrids with small modular reactor (SMR) to improve the overall microgrid performance.The study shows that SMR could be a feasible solution if microgrid parameters are selected properly. (author)

  4. Multi-attribute criteria applied to electric generation energy system analysis LDRD.

    Energy Technology Data Exchange (ETDEWEB)

    Kuswa, Glenn W.; Tsao, Jeffrey Yeenien; Drennen, Thomas E.; Zuffranieri, Jason V.; Paananen, Orman Henrie; Jones, Scott A.; Ortner, Juergen G. (DLR, German Aerospace, Cologne); Brewer, Jeffrey D.; Valdez, Maximo M.

    2005-10-01

    This report began with a Laboratory-Directed Research and Development (LDRD) project to improve Sandia National Laboratories multidisciplinary capabilities in energy systems analysis. The aim is to understand how various electricity generating options can best serve needs in the United States. The initial product is documented in a series of white papers that span a broad range of topics, including the successes and failures of past modeling studies, sustainability, oil dependence, energy security, and nuclear power. Summaries of these projects are included here. These projects have provided a background and discussion framework for the Energy Systems Analysis LDRD team to carry out an inter-comparison of many of the commonly available electric power sources in present use, comparisons of those options, and efforts needed to realize progress towards those options. A computer aid has been developed to compare various options based on cost and other attributes such as technological, social, and policy constraints. The Energy Systems Analysis team has developed a multi-criteria framework that will allow comparison of energy options with a set of metrics that can be used across all technologies. This report discusses several evaluation techniques and introduces the set of criteria developed for this LDRD.

  5. Training Endogenous Task Shifting Using Music Therapy: A Feasibility Study.

    Science.gov (United States)

    Lynch, Colleen; LaGasse, A Blythe

    2016-01-01

    People with acquired brain injury (ABI) are highly susceptible to disturbances in executive functioning (EF), and these effects are pervasive. Research studies using music therapy for cognitive improvement in this population are limited. The purpose of this study was to determine the feasibility of a Musical Executive Function Training (MEFT) intervention to address task-shifting skills in adults with ABI and to obtain preliminary evidence of intervention effect on task shifting. Fourteen participants were randomly assigned to one of three groups: a music therapy intervention group (MTG), a singing group (SG), or the no-intervention control group (CG). The SG and MTG met for one hour a day for five days. Feasibility measures included participant completion rates and intervention fidelity. Potential benefits were measured using the Trail Making Test and the Paced Auditory Serial Addition Task as a pre- and posttest measure. Participant completion rates and interventionist fidelity to the protocol supported feasibility. One-way ANOVA of the pre- and posttest group differences revealed a trend toward improvement in the MTG over the SG. Feasibility and effect size data support a larger trial of the MEFT protocol. © the American Music Therapy Association 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  6. 43 CFR 404.47 - How will a feasibility study be conducted under this program?

    Science.gov (United States)

    2010-10-01

    ... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false How will a feasibility study be conducted... Studies § 404.47 How will a feasibility study be conducted under this program? Feasibility studies will be... feasibility study, including the Principles and Guidelines (incorporated by reference at § 404.4). You...

  7. Feasibility study on production of Co-60 in PHWR

    Energy Technology Data Exchange (ETDEWEB)

    Park, Kyung Bae; Han, Hyon Soo; Joo, Po Kook

    2000-05-01

    The purpose of this study is to analyze the safeties and the economics for Co-60 production from Wolsung PHWR and to verify the feasibility on the manufacturing of the final Co-60 source for industrial irradiation. The feasibility of reactor conversion was carried out with KEPCO collaboration. Through the site survey on the experience of Gentililly-2 in Canada, a feasibility of plant conversion, changes in design, equipment and tools for Co-60 production was verified. It was estimated that the reactor conversion would not impose adverse impact on plant safety. For the encapsulation of radiation source and storage of the final products, a modification of concrete hot cell at KAERI was primary concerns. The installation and improvement of facilities are needed to avoid cross contamination and extra radiation exposure. Main items for these are pressure gauge, separated HEPA filter the ceiling separation, extra-shielding and ceiling hoist system. At present, storage pool has got admission based on 400 kCi. But it is necessary to seismic analysis and design improvement of shielding to store 10 MCi (Co-60) which is the estimated Co-60 capacity produced by 3 PHWRs. According to present investigation, a production of Co-60 by PHWR and RIPE was seemed to be an economically feasible business and it was also expected that a joint venture will be able to realize by cooperation with MDS Nordion Co.

  8. Inverse Problem in the Surface EMG: A Feasibility Study

    Science.gov (United States)

    2007-11-02

    the arm containing the studied muscle is modelised (figure 1). The multi- electrode recording system is composed of 16 electrodes regularly...nature of this study (feasibility of the inverse problem in SEMG), the modelisation was made with a few simplifying hypotheses in mind to facilitate the...implementation of the localisation algorithm. This modelisation is nevertheless inspired by previous works [6], and the shapes of the synthetic MUAPs

  9. Intensive Cognitive Therapy for PTSD: A Feasibility Study

    OpenAIRE

    Ehlers, Anke; Clark, David M.; Hackmann, Ann; Grey, Nick; Liness, Sheena; Wild, Jennifer; Manley, John; Waddington, Louise; McManus, Freda

    2010-01-01

    Background: Cognitive Behaviour Therapy (CBT) of anxiety disorders is usually delivered in weekly or biweekly sessions. There is evidence that intensive CBT can be effective in phobias and obsessive compulsive disorder. Studies of intensive CBT for posttraumatic stress disorder (PTSD) are lacking. Method: A feasibility study tested the acceptability and efficacy of an intensive version of Cognitive Therapy for PTSD (CT-PTSD) in 14 patients drawn from consecutive referrals. Patients received u...

  10. Feasibility study of gasification of oil palm fronds

    OpenAIRE

    Sulaiman, S. A.; S. Balamohan; M.N.Z. Moni; S.M. Atnaw; Mohamed, A O

    2015-01-01

    Considering the large and consistent supply, oil palm fronds could be a promising source of biomass energy through gasification. There is very scarce information on the characteristics of oil palm fronds, which is vital in deciding if such biomass is technically suitable for gasification. In the present work, the feasibility of oil palm fronds for biomass gasification is studied. The study is conducted experimentally via standard tests to determine their thermochemical characteristics. Ultim...

  11. Initial Feasibility Study to Drill and Core the Ocean Mantle

    OpenAIRE

    2011-01-01

    An initial feasibility study (Pilisi and Whitney, 2011) of drilling through the Mohorovičić discontinuity (Moho) into the oceanic mantle specifically focused on future requirements for planning, drilling and coring a hole 500 m into the oceanic mantle from three candidate locations in the Pacific Ocean (Cocos Plate, Baja California, and offshore Hawaii). The study points out some of the critical issues that need to be resolved before embarking upon such a challengingproject. It was conducted ...

  12. Feasibility studies of the diffractive bremsstrahlung measurement at the LHC

    Energy Technology Data Exchange (ETDEWEB)

    Chwastowski, Janusz J.; Czekierda, Sabina; Staszewski, Rafal; Turnau, Jacek; Trzebinski, Maciej [The Henryk Niewodniczanski Institute of Nuclear Physics, Polish Academy of Sciences, Cracow (Poland); Kycia, Radoslaw [Cracow University of Technology, Faculty of Physics, Mathematics and Computer Science, Cracow (Poland)

    2016-06-15

    Feasibility studies of an observation of the exclusive diffractive bremsstrahlung in proton-proton scattering at the centre of mass energy 13 TeV at the LHC are reported. These studies aim at the dedicated data taking periods with low instantaneous luminosity delivered by the LHC where the pile-up interactions can be neglected. A simplified approach to the photon and the scattered proton energy reconstruction is used. The background influence is discussed. (orig.)

  13. Encoal mild coal gasification project: Commercial plant feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-07-01

    In order to determine the viability of any Liquids from Coal (LFC) commercial venture, TEK-KOL and its partner, Mitsubishi Heavy Industries (MHI), have put together a technical and economic feasibility study for a commercial-size LFC Plant located at Zeigler Coal Holding Company`s North Rochelle Mine site. This resulting document, the ENCOAL Mild Coal Gasification Plant: Commercial Plant Feasibility Study, includes basic plant design, capital estimates, market assessment for coproducts, operating cost assessments, and overall financial evaluation for a generic Powder River Basin based plant. This document and format closely resembles a typical Phase II study as assembled by the TEK-KOL Partnership to evaluate potential sites for LFC commercial facilities around the world.

  14. Precision guided parachute LDRD final report

    Energy Technology Data Exchange (ETDEWEB)

    Gilkey, J.C. [Sandia National Labs., Albuquerque, NM (United States). Aided Navigation and Remote Sensing Dept.

    1996-07-01

    This report summarizes the results of the Precision Guided Parachute LDRD, a two year program at Sandia National Laboratories which developed a Global Positioning System (GPS) guided parachute capable of autonomous flight and landings. A detailed computer model of a gliding parachute was developed for software only simulations. A hardware in-the-loop simulator was developed and used for flight package system integration and design validation. Initial parachute drop tests were conducted at Sandia`s Coyote Canyon Cable Facility, followed by a series of airdrops using Ross Aircraft`s Twin Otter at the Burris Ranch Drop Zone. Final flights demonstrated in-flight wind estimation and the capability to fly a commanded heading. In the past, the cost and logistical complexity of an initial navigation system ruled out actively guiding a parachute. The advent of the low-cost, light-weight Global Positioning System (GPS) has eliminated this barrier. By using GPS position and velocity measurements, a guided parachute can autonomously steer itself to a targeted point on the ground through the use of control drums attached to the control lanyards of the parachute. By actively correcting for drop point errors and wind drift, the guidance accuracy of this system should be on the order of GPS position errors. This would be a significant improvement over unguided airdrops which may have errors of a mile or more.

  15. Self organizing software research : LDRD final report.

    Energy Technology Data Exchange (ETDEWEB)

    Osbourn, Gordon Cecil

    2004-01-01

    We have made progress in developing a new statistical mechanics approach to designing self organizing systems that is unique to SNL. The primary application target for this ongoing research has been the development of new kinds of nanoscale components and hardware systems. However, this research also enables an out of the box connection to the field of software development. With appropriate modification, the collective behavior physics ideas for enabling simple hardware components to self organize may also provide design methods for a new class of software modules. Our current physics simulations suggest that populations of these special software components would be able to self assemble into a variety of much larger and more complex software systems. If successful, this would provide a radical (disruptive technology) path to developing complex, high reliability software unlike any known today. This high risk, high payoff opportunity does not fit well into existing SNL funding categories, as it is well outside of the mainstreams of both conventional software development practices and the nanoscience research area that spawned it. This LDRD effort was aimed at developing and extending the capabilities of self organizing/assembling software systems, and to demonstrate the unique capabilities and advantages of this radical new approach for software development.

  16. ICF Program: LDRD-ER Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Glenzer, S H

    2004-02-05

    In the 01-ERD-107 LDRD-ER project, we have performed novel Thomson scattering experiments at the Trident and Omega laser facilities and provided high quality spectral data. These results have led to the development of the first quantitative understanding of laser-plasma interactions for NIF plasmas. For this purpose an green/ultraviolet probe laser, built for Nova in 1998 [1] and successfully used to measure both temperature and plasma wave amplitudes [2], has been deployed on Omega. The Thomson scattering diagnostics has been used twofold: (1) it provided independent measurements of the plasma electron and ion temperature, the plasma flow velocity, or the electron distribution function; (2) it provided measurements of the primary plasma wave and their secondary non-linear decay wave products. These experiments at Omega provide definitive quantitative results on the nonlinear saturation of stimulated Raman scattering for green (2{omega}) beams. In addition, the experiments on the Trident laser have led to a quantitative understanding of the stimulated Brillouin scattering in low-Z plasmas. A nonlinear frequency detuning model has successfully explained all the experimental observable including the SBS reflectivity. This model has been implemented into the laser-plasma interaction code pF3D as a tool to design and optimize NIF target experiments with SBS and SRS losses included. The development of quantitative models for SBS and SRS for various regimes has now been adopted as part of the WBS1 project within the ICF program.

  17. Cogeneration feasibility study in the Gulf States Utilities service area

    Energy Technology Data Exchange (ETDEWEB)

    1979-12-01

    Sites in the Gulf States Utilities service are considered for cogeneration feasibility studies. The sources of steam considered for the Orange, Texas and Geismar, Lake Charles, and North Baton Rouge, Louisiana sites include oil, coal, HTGR steamers, consolidated nuclear steam system, atmospheric fluidized-bed coal combustion, and coal gasification. Concepts concerning cogeneration fuel systems were categorized by technical applicability as: current technology (pulverized coal-fired boilers and fuel oil-fired boilers), advanced technology under development (HTGR steamers and the CNSS), and advanced technology for future development (atmospheric fluidized-bed boilers and coal gasification). In addition to providing data on cogeneration plant generally useful in the US, the study determined the technical and economic feasibility of steam and electric power cogeneration using coal and nuclear fuels for localized industrial complexes. Details on site selection, plant descriptions, cost estimates, economic analysis, and plant schedule and implementation. (MCW)

  18. US-Canada Great Lakes Regional Specimen Bank Feasibility Study.

    Science.gov (United States)

    Kerry, A; Edmonds, C J; Landon, L; Yonker, T L

    1993-11-01

    A study to examine the feasibility of establishing a Regional Specimen Bank in the Great Lakes area of the United States and Canada has recently been initiated by the Michigan Audubon Society. There are several existing formal and informal specimen banking facilities active in the region but their combined adequacy has not been evaluated. This feasibility study will establish the need and use of a regional bank and the institution(s) necessary to satisfy this need will be recommended. The study will address the scope required to meet present and future needs including the types of specimens to be represented in the bank, geographic coverage and protocols for collection, shipping, processing, analysis and storage. A management policy of the bank will be developed encompassing business operation, costs, governing structure and personnel requirements. The legal requirements of the bank will be determined with regards to the acquisition of samples, transport across national boundaries, access to specimens and information, and liability during operation. An effective information dissemination network will be recommended that is compatible with national and international partners, will facilitate technology and information transfer and support the quality and status of the bank. Determination of secure, long-term funding sources will be one of the key elements to ensuring a safe repository. This feasibility study is funded by the Great Lakes Protection Fund.

  19. LDRD summary report. Part 1: initiation studies of thin film explosvies used for scabbling concrete. Part 2: investigation of spray techniques for use in explosive scabbling of concrete

    Energy Technology Data Exchange (ETDEWEB)

    Benham, R.A.; Bickes, R.W. Jr.; Grubelich, M.C.; Wackerbarth, D.E.; Brock, J.L.

    1996-11-01

    We describe a new method for the scabbling of concrete surfaces using a thin layer of explosive material sprayed onto the surfaces. We also developed a new explosive mixture that could be applied with commercial spray painting equipment. The first part of our record describes experiments that studied methods for the initiation of the sprayed explosive. We successfully initiated layers 0.36 mm thick using a commercial EBW detonator, a flying plate detonator, and by pellet impact. The second part of our report describes a survey of spray methods and tests with two commercial spray systems that we believe could be used for developing a robotic spray system.

  20. Exclusive Jet Measurement in Special LHC Runs - Feasibility Studies

    CERN Document Server

    Trzebinski, M

    2016-01-01

    The feasibility studies of the central exclusive jet production at the LHC using the proton tagging technique are presented. Three classes of data taking scenarios are considered: double tag at high pile-up, single tag at low pile-up and double tag at low pile-up. Analyses were performed at the c.m. energy of 14 TeV for the ATLAS experiment, but are also valid for the CMS/TOTEM detectors.

  1. Technical Feasibility Study for Zero Energy K-12 Schools

    Energy Technology Data Exchange (ETDEWEB)

    Bonnema, Eric [National Renewable Energy Lab. (NREL), Golden, CO (United States); Goldwasser, David [National Renewable Energy Lab. (NREL), Golden, CO (United States); Torcellini, Paul [National Renewable Energy Lab. (NREL), Golden, CO (United States); Pless, Shanti [National Renewable Energy Lab. (NREL), Golden, CO (United States); Studer, Daniel [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-11-01

    This technical feasibility study provides documentation and research results supporting a possible set of strategies to achieve source zero energy K-12 school buildings as defined by the U.S. Department of Energy (DOE) zero energy building (ZEB) definition (DOE 2015a). Under this definition, a ZEB is an energy-efficient building in which, on a source energy basis, the actual annual delivered energy is less than or equal to the on-site renewable exported energy.

  2. Coeur d'Alene Tribe Energy Efficiency Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Allgood, Tiffany L.; Sorter, Andy

    2015-01-13

    The Coeur d'Alene Tribe's Energy Efficiency Feasibility Study (EEFS) is the culminating document that compiles the energy efficiency and building performance assessment and project prioritization process completed on 36 Tribally owned and operated facilities within Tribal lands. The EEFS contains sections on initial findings, utility billing analyses, energy conservation measures and prioritization and funding sources and strategies for energy project implementation.

  3. Coeur d'Alene Tribe Energy Efficiency Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Allgood, Tiffany L. [Coeur d' Alene Tribe, Plummer, ID (United States); Sorter, Andy [Coeur d' Alene Tribe, Plummer, ID (United States)

    2014-09-01

    The Coeur d'Alene Tribe's Energy Efficiency Feasibility Study (EEFS) is the culminating document that compiles the energy efficiency and building performance assessment and project prioritization process completed on 36 Tribally owned and operated facilities within Tribal lands. The EEFS contains sections on initial findings, utility billing analyses, energy conservation measures and prioritization and funding sources and strategies for energy project implementation.

  4. Feasibility Study of Compressive Sensing Underwater Imaging Lidar

    Science.gov (United States)

    2014-03-28

    patterns generated using this scheme can significantly reduce the cost and complexity of the antenna design in such imaging systems. Another...currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1, REPORT DATE (’DD- MW -yYVyj 03/28/2014 2. REPORT TYPE Final...Feasibility study of Compressive Sensing Underwater Imaging Lidar 5a. CONTRACT NUMBER 5b. GRANT NUMBER N00014-12-1-0921 5c. PROGRAM ELEMENT NUMBER 6

  5. A Feasibility Study for Establishing a Sustainability Consulting Firm

    OpenAIRE

    Mathieu, Susan F.

    2011-01-01

    This study examines the feasibility of Mathieu Sustainability Consulting (MSC) entering the sustainability consulting industry and targeting the Canadian junior mineral exploration sector. The target market is attractive due to: (1) expanding domestic and foreign exploration investment; (2) increasing regulatory and societal pressures to integrate sustainability into exploration activities; and (3) the tendency of exploration companies to limit their size and retain specialized services on an...

  6. Feasibility Study for a Hopi Utility-Scale Wind Project

    Energy Technology Data Exchange (ETDEWEB)

    Kendrick Lomayestewa

    2011-05-31

    The goal of this project was to investigate the feasibility for the generation of energy from wind and to parallel this work with the development of a tribal utility organization capable of undertaking potential joint ventures in utility businesses and projects on the Hopi reservation. The goal of this project was to investigate the feasibility for the generation of energy from wind and to parallel this work with the development of a tribal utility organization capable of undertaking potential joint ventures in utility businesses and projects on the Hopi reservation. Wind resource assessments were conducted at two study sites on Hopi fee simple lands located south of the city of Winslow. Reports from the study were recently completed and have not been compared to any existing historical wind data nor have they been processed under any wind assessment models to determine the output performance and the project economics of turbines at the wind study sites. Ongoing analysis of the wind data and project modeling will determine the feasibility of a tribal utility-scale wind energy generation.

  7. Elastography using harmonic ultrasonic imaging: a feasibility study.

    Science.gov (United States)

    Desai, Raghavendra Reddy; Krouskop, Thomas A; Righetti, Raffaella

    2010-04-01

    Tissue Harmonic Imaging (THI) is a relatively new modality that has had a significant impact in the ultrasound field. In the recent past, imaging the mechanical properties of tissues using elastography has also gained great interest. In this paper, we investigate the feasibility of combining these two state-of-the-art ultrasound-imaging modalities. The performance of elastograms obtained using harmonic ultrasonic signals is studied with simulations and compared to the performance of conventional elastograms using standard statistical methods. Experiments are used as a proof of the technical feasibility of generating tissue-harmonic elastograms using experimental harmonic signals. The results of our simulation study indicate that all image quality factors considered in this study (elastographic signal-to-noise ratio, elastographic contrast-to-noise ratio and spatial resolution) may be improved when using harmonic ultrasonic signals, provided that the ultrasound system is characterized by high bandwidth, high sampling frequency and large lateral sampling. Preliminary experimental results suggest that it is technically feasible to generate experimental elastograms using harmonic signals, provided that the sonographic signal-to-noise ratio of the pre- and postcompression harmonic frames is sufficiently high to guarantee reliable values of correlation.

  8. Feasibility Study for a Hopi Utility-Scale Wind Project

    Energy Technology Data Exchange (ETDEWEB)

    Kendrick Lomayestewa

    2011-05-31

    The goal of this project was to investigate the feasibility for the generation of energy from wind and to parallel this work with the development of a tribal utility organization capable of undertaking potential joint ventures in utility businesses and projects on the Hopi reservation. The goal of this project was to investigate the feasibility for the generation of energy from wind and to parallel this work with the development of a tribal utility organization capable of undertaking potential joint ventures in utility businesses and projects on the Hopi reservation. Wind resource assessments were conducted at two study sites on Hopi fee simple lands located south of the city of Winslow. Reports from the study were recently completed and have not been compared to any existing historical wind data nor have they been processed under any wind assessment models to determine the output performance and the project economics of turbines at the wind study sites. Ongoing analysis of the wind data and project modeling will determine the feasibility of a tribal utility-scale wind energy generation.

  9. Will patients accept randomization to psychoanalysis? A feasibility study.

    Science.gov (United States)

    Caligor, Eve; Hilsenroth, Mark J; Devlin, Michael; Rutherford, Bret R; Terry, Madeleine; Roose, Steven P

    2012-04-01

    The feasibility of using a randomized design in a psychoanalytic outcome study was evaluated. Our hypothesis was that it would be feasible to randomize patients to psychoanalysis three or four times weekly on the couch for five years, supportive expressive therapy once or twice weekly for up to forty sessions, and cognitive behavior therapy once or twice weekly for up to forty sessions. Successful randomization was defined as a 30% recruitment rate among eligible patients. Recruitment began in September 2009 and closed in April 2010. A total of 132 subjects responded to study advertisements, 107 of whom (81%) were triaged out. The remaining 25 were scheduled for the first of two clinical interviews, and 21 of 25 (88%) completed the interview. Eleven of the 25 (44%) were determined to be eligible based on inclusion and exclusion criteria. Eight of the 11 accepted the idea of randomization and completed the diagnostic assessment phase. Calculated on the basis of 8 of 11 eligible patients accepting randomization, the 95% confidence interval was that 39% to 92% of eligible subjects would participate in a larger study of this design. Our findings support the feasibility of implementing an RCT comparing psychoanalysis as defined by the American Psychoanalytic Association (three or four times weekly on the couch for approximately five years) with shorter-term dynamic or cognitive behavioral therapy once or twice a week. Pre-treatment characteristics of these eight patients are presented, as are initial reliability data for the treatment adherence scales used in this trial.

  10. Feasibility Study for Casting of High Temperature Refractory Superalloy Composites

    Science.gov (United States)

    Lee, Jonathan A.

    1998-01-01

    Abstract This study investigated the feasibility of using conventional casting technique to fabricate refractory wires reinforced superalloy composites. These composites were being developed for advanced rocket engine turbine blades and other high temperature applications operating up to 2000 F. Several types of refractory metal wires such as W- Th, W-Re, Mo-Hf-C and W-HF-C reinforced waspaloy were experimentally cast and heat treated at 2000 F up to 48 hrs. Scanning electron microscope analysis was conducted in regions adjacent to the wire-matrix interface to determine the reaction zone and chemical compatibility resulting from material interdiffusion. It was concluded that fabrication using conventional casting may be feasible because the wire-matrix reaction zone thickness was comparable to similar composites produced by arc-sprayed monotape with hot isostatic pressing technique, Moreover, it was also found that the chemical compatibility could be improved significantly through a slight modification of the superalloy matrix compositions.

  11. PUEBLO OF ZIA RENEWABLE ENERGY DEVELOPMENT FEASIBILITY STUDY

    Energy Technology Data Exchange (ETDEWEB)

    Pino, Peter M. [Tribal Administrator (Ret.), Pueblo of Zia; Lakshman, Jai [Project Manager (NDA) for Pueblo of Zia; Toole, G. Loren [Principal Investigator, Los Alamos National Laboratory - Energy Analysis Team/ CCS-3, D-4; Hand, Dan [P.E., Sustainable Enginerring; Witcher, James; Emerson, Michael A. [Senior V.P., ARES Corporation; Turner, Jeremy [Executive Director, NM Renewable Energy Transmission Authority; Sandidge, Wendy [Director of Operations, NM Community Capital

    2014-06-30

    The Pueblo of Zia will conduct a comprehensive feasibility study for best-use application(s) for development of renewable energy resources on its tribally held TRUST lands (i.e., Trust Lands of Zia Indian Reservation). The feasibility study is essential for determining the technical and economic viability of a future renewable project(s) on Zia tribal lands, including the potential economic and environmental benefits for the Tribe. Project Objectives: The feasibility study is essential for determining the technical and economic viability of future renewable project(s) on Zia tribal lands, including the potential economic and environmental benefits for the Tribe to: 1. Provide a balanced local renewable power supply for Zia Pueblo, its members, tribal offices, schools and buildings, and businesses on tribal lands 2. Provide a firm power supply for export and commercial market distribution 3. Provide economic development for the Tribe and its members, including job training and creation, each in accordance with the goals and objectives as conveyed by the Pueblo of Zia Tribal Council, Tribal Administration, and outlined in The Pueblo of Zia Comprehensive Plan and Pueblo of Zia — Zia Enterprise Zone Master Plan. A key goal of the study is to analyze the integrated development of solar, geothermal, and wind renewable energy resources at Zia Pueblo, with added potential to combine gas-fired generation to accomplish energy firming. Geothermal offers a base load source of energy, providing power continuously for end users. Wind and solar offer intermediate and peaking sources of energy, which can be harvested throughout the day, with periods of variable but predicable output. Variability will be managed in an integrated manner, using Zia Pueblo's combined renewable resources to generate high-quality power. Tasks are intended to collect, catalog, map, and analyze existing data on Zia Pueblo's renewable energy resource base and then match resource attributes with

  12. Pascua Yaqui Tribe Renewable Energy Development and Deployment Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Arvayo, Maria

    2014-05-30

    In 2012, PYT was awarded a grant from the Department of Energy Tribal Energy Program to conduct a Renewable Energy Development and Deployment Feasibility Study that would define the technical and economic viability of renewable energy on tribal lands. Red Mountain Energy Partners (RMEP) was hired by PYT to complete the study. Through this study, Red Mountain concluded that there are viable opportunities for solar at Tortuga Ranch, the Casino del Sol and a third site near the Justice Center on Camino de Oeste.

  13. Feasibility study of home telerehabilitation for physically inactive veterans

    Directory of Open Access Journals (Sweden)

    Nancy D. Harada, PhD

    2010-07-01

    Full Text Available The aim of this study was to develop a system for and determine the feasibility of monitoring home exercise for physically inactive older adults using a Health Buddy (HB text messaging device (Robert Bosch Healthcare; Palo Alto, California. Questions and messages related to exercise adherence are displayed on the HB screen and participants choose a response by pressing the corresponding button on the device. Responses are transmitted through a landline connection and high-risk responses are highlighted by the system for follow-up. We developed the questions and messages based on input from patient and clinician focus groups. We evaluated feasibility by administering the intervention to inpatient and outpatient adults aged 60 or older. We gave participants a choice of exercise monitoring by HB (n = 20 or telephone (n = 18. The results showed that home exercise monitoring by HB and telephone is safe, as evidenced by low adverse event rates. We saw a decline in exercise adherence rates to both the HB and telephone after 8 weeks, although adherence was better for HB than telephone. Taken together, the results demonstrate the feasibility of using text messaging to monitor home exercise adherence in physically inactive older adults.

  14. LDRD Final Report: Global Optimization for Engineering Science Problems

    Energy Technology Data Exchange (ETDEWEB)

    HART,WILLIAM E.

    1999-12-01

    For a wide variety of scientific and engineering problems the desired solution corresponds to an optimal set of objective function parameters, where the objective function measures a solution's quality. The main goal of the LDRD ''Global Optimization for Engineering Science Problems'' was the development of new robust and efficient optimization algorithms that can be used to find globally optimal solutions to complex optimization problems. This SAND report summarizes the technical accomplishments of this LDRD, discusses lessons learned and describes open research issues.

  15. Feasibility study on the development of proton accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Ki Hyung; Bang, Hyung Chan; Cho, Yong Sup [Seoul National University, Seoul (Korea, Republic of); Kim, Young Rak [Church Environment Research Institute, Seoul (Korea, Republic of); Nam Kung, Won; Cho, Moo Hyun [Pohang University of Science and Technology, Pohang (Korea, Republic of); Seo, Tae Suk [Cartolrik University, Seoul (Korea, Republic of); Woo, Hyung Joo [Nature Research Institute, Seoul (Korea, Republic of); Lee, Kyung Soo [Basic Study Research Institute, Seoul (Korea, Republic of); Lee, Hun Joo [Cheju National University, Cheju (Korea, Republic of); Chang, Soon Hong; Cho, Nam Jin [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of); Han, Jeon Kun [Sungkyunkwan University, Seoul (Korea, Republic of)

    1996-10-01

    A feasibility on the development of a high energy proton accelerator to be used for R and D in the nuclear field of korea was studied. The proposed one is a proton linac with parameters of about 1 GeV, 20 mA which can supply enough neutrons by the spallation reaction to drive a subcritical reactor. It= is expected to solve the intrinsic problem in the nuclear field such as safety, nuclear waste, proliferation and resource. The study was carried out through a multi-institutional cooperation of universities, institute and industry for a national consensus. 5 refs., 8 tabs., 8 figs. (author)

  16. Spatial and temporal resolution of fluid flows: LDRD final report

    Energy Technology Data Exchange (ETDEWEB)

    Tieszen, S.R.; O`Hern, T.J.; Schefer, R.W.; Perea, L.D.

    1998-02-01

    This report describes a Laboratory Directed Research and Development (LDRD) activity to develop a diagnostic technique for simultaneous temporal and spatial resolution of fluid flows. The goal is to obtain two orders of magnitude resolution in two spatial dimensions and time simultaneously. The approach used in this study is to scale up Particle Image Velocimetry (PIV) and Planar Laser Induced Fluorescence (PLIF) to acquire meter-size images at up to 200 frames/sec. Experiments were conducted in buoyant, fully turbulent, non-reacting and reacting plumes with a base diameter of one meter. The PIV results were successful in the ambient gas for all flows, and in the plume for non-reacting helium and reacting methane, but not reacting hydrogen. No PIV was obtained in the hot combustion product region as the seed particles chosen vaporized. Weak signals prevented PLIF in the helium. However, in reacting methane flows, PLIF images speculated to be from Poly-Aromatic-Hydrocarbons were obtained which mark the flame sheets. The results were unexpected and very insightful. A natural fluorescence from the seed particle vapor was also noted in the hydrogen tests.

  17. Feasibility study of gasification of oil palm fronds

    Directory of Open Access Journals (Sweden)

    S.A. Sulaiman

    2015-12-01

    Full Text Available Considering the large and consistent supply, oil palm fronds could be a promising source of biomass energy through gasification. There is very scarce information on the characteristics of oil palm fronds, which is vital in deciding if such biomass is technically suitable for gasification. In the present work, the feasibility of oil palm fronds for biomass gasification is studied. The study is conducted experimentally via standard tests to determine their thermochemical characteristics. Ultimate analysis is conducted to determine the contents of carbon, nitrogen, hydrogen and sulphide in oil palm fronds. Proximate analysis is performed to identify the burning characteristics of the biomass. The energy content in the fronds is determined by using a bomb calorie meter and is around 18 MJ/kg. The ignitability of the fronds is also studied experimentally to assess the ease to start-up combustion of the fronds. The characteristics of the flame of the resulting syngas from gasification of oil palm fronds are qualitatively studied. Simulated syngas composition study reveals potentials of 22% CO, 1.3% H2, 18.5% CO2 and traces of CH4. The study is extended to computer simulation to predict composition of the syngas. It is found from this work that oil palm fronds are feasible for gasification and has a good potential as a renewable energy source.

  18. LDRD Final Report - Investigations of the impact of the process integration of deposited magnetic films for magnetic memory technologies on radiation-hardened CMOS devices and circuits - LDRD Project (FY99)

    Energy Technology Data Exchange (ETDEWEB)

    MYERS,DAVID R.; JESSING,JEFFREY R.; SPAHN,OLGA B.; SHANEYFELT,MARTY R.

    2000-01-01

    This project represented a coordinated LLNL-SNL collaboration to investigate the feasibility of developing radiation-hardened magnetic non-volatile memories using giant magnetoresistance (GMR) materials. The intent of this limited-duration study was to investigate whether giant magnetoresistance (GMR) materials similar to those used for magnetic tunnel junctions (MTJs) were process compatible with functioning CMOS circuits. Sandia's work on this project demonstrated that deposition of GMR materials did not affect the operation nor the radiation hardness of Sandia's rad-hard CMOS technology, nor did the integration of GMR materials and exposure to ionizing radiation affect the magnetic properties of the GMR films. Thus, following deposition of GMR films on rad-hard integrated circuits, both the circuits and the films survived ionizing radiation levels consistent with DOE mission requirements. Furthermore, Sandia developed techniques to pattern deposited GMR films without degrading the completed integrated circuits upon which they were deposited. The present feasibility study demonstrated all the necessary processing elements to allow fabrication of the non-volatile memory elements onto an existing CMOS chip, and even allow the use of embedded (on-chip) non-volatile memories for system-on-a-chip applications, even in demanding radiation environments. However, funding agencies DTRA, AIM, and DARPA did not have any funds available to support the required follow-on technology development projects that would have been required to develop functioning prototype circuits, nor were such funds available from LDRD nor from other DOE program funds.

  19. Feasibility Study for Operable Unit 7-13/14

    Energy Technology Data Exchange (ETDEWEB)

    K. Jean Holdren

    2007-05-29

    The Subsurface Disposal Area is a radioactive waste landfill located within the Radioactive Waste Management Complex at the Idaho National Laboratory Site in southeastern Idaho. This Feasibility Study for Operable Unit 7-13/14 analyzes options for mitigating risks to human health and the environment associated with the landfill. Analysis is conducted in accordance with the Comprehensive Environmental Response, Compensation, and Liability Act, using nine evaluation criteria to develop detailed and comparative analysis of five assembled alternatives. Assembled alternatives are composed of discrete modules. Ultimately, decision-makers will select, recombine, and sum various modules into an optimized preferred alternative and final remedial decision.

  20. Feasibility study. Solar energy in Norway; Mulighetsstudie. Solenergi i Norge

    Energy Technology Data Exchange (ETDEWEB)

    Halvorsen, Una; Bernhard, Peter; Salvesen, Fritjof; Bugge, Lars; Andresen, Inger; Simonsen, Ingeborg

    2011-07-01

    On behalf of Enova KanEnergi and SINTEF summarized the results of the project 'Feasibility study. Solar energy' in a report. The purpose of this report is to outline an overview of the potential for solar energy in Norway to be realized until 2020. This is a survey of the status of technology and associated costs related to energy production, as well as a description of the market conditions. This report is a contribution to Enova's ongoing strategy and development. (eb)

  1. Feasibility Study of Biomass Electrical Generation on Tribal Lands

    Energy Technology Data Exchange (ETDEWEB)

    Tom Roche; Richard Hartmann; Joohn Luton; Warren Hudelson; Roger Blomguist; Jan Hacker; Colene Frye

    2005-03-29

    The goals of the St. Croix Tribe are to develop economically viable energy production facilities using readily available renewable biomass fuel sources at an acceptable cost per kilowatt hour ($/kWh), to provide new and meaningful permanent employment, retain and expand existing employment (logging) and provide revenues for both producers and sellers of the finished product. This is a feasibility study including an assessment of available biomass fuel, technology assessment, site selection, economics viability given the foreseeable fuel and generation costs, as well as an assessment of the potential markets for renewable energy.

  2. Feasibility study for the United Heckathorn Superfund Site, Richmond, California

    Energy Technology Data Exchange (ETDEWEB)

    Lincoff, A.H. [US Environmental Protection Agency, San Francisco, CA (United States). Region IX; Costan, G.P.; Montgomery, M.S.; White, P.J. [Pacific Northwest Lab., Richland, WA (United States)

    1994-07-01

    The United Heckathom Superfund Site in Richmond, California, was used to formulate pesticides from approximately 1947 to 1966. Soils at the site and sediments in the harbor were contaminated with various chlorinated pesticides, primarily DDT, as a result of these activities. The US Environmental Protection Agency listed the site on the Superfund National Priorities List in 1990. This document is part of the Remedial Investigation and Feasibility Study phase of the Superfund response, which will provide the basis for selection of a final remedy that will protect human health and the environment and achieve compliance with federal and state envirorunental laws.

  3. Feasibility Study on High Concentrating Photovoltaic Power Towers

    Science.gov (United States)

    Frohberger, Dirk; Jaus, Joachim; Wiesenfarth, Maike; Schramek, Philipp; Bett, Andreas W.

    2010-10-01

    This paper presents an analysis on the concept of high concentrating PV power towers. A feasibility study is conducted in order to evaluate the future potential of this technology. Objective of the analysis is to provide an improved basis for establishing research and development priorities for the PV power tower concept. Performance assessments and cost calculations for a 1 MW prototype PV tower power are derived. Based on the assumption of a highly homogeneously illuminated receiver, levelized costs of electricity of 0.29 €/kWh have been calculated for a prototype PV tower power.

  4. Feasibility of Piezoelectric Endoscopic Transsphenoidal Craniotomy: A Cadaveric Study

    Directory of Open Access Journals (Sweden)

    Peter Valentin Tomazic

    2014-01-01

    Full Text Available Objective. Endoscopic transsphenoidal approach has become the gold standard for surgical treatment of treating pituitary adenomas or other lesions in that area. Opening of bony skull base has been performed with burrs, chisels, and hammers or standard instruments like punches and circular top knives. The creation of primary bone flaps—as in external craniotomies—is difficult.The piezoelectric osteotomes used in the present study allows creating a bone flap for endoscopic transnasal approaches in certain areas. The aim of this study was to prove the feasibility of piezoelectric endoscopic transnasal craniotomies. Study Design. Cadaveric study. Methods. On cadaveric specimens (N=5, a piezoelectric system with specially designed hardware for endonasal application was applied and endoscopic transsphenoidal craniotomies at the sellar floor, tuberculum sellae, and planum sphenoidale were performed up to a size of 3–5 cm2. Results. Bone flaps could be created without fracturing with the piezoosteotome and could be reimplanted. Endoscopic handling was unproblematic and time required was not exceeding standard procedures. Conclusion. In a cadaveric model, the piezoelectric endoscopic transsphenoidal craniotomy (PETC is technically feasible. This technique allows the surgeon to create a bone flap in endoscopic transnasal approaches similar to existing standard transcranial craniotomies. Future trials will focus on skull base reconstruction using this bone flap.

  5. The NGST Yardstick Integrated Science Instrument Module (ISIM) Feasibility Study

    Science.gov (United States)

    Greenhouse, M. A.; NGST ISIM Team

    1999-05-01

    The Next Generation Space Telescope (NGST) Integrated Science Instrument Module (ISIM) is a distributed system consisting of a cryogenic instrument module that is integrated with the Optical Telescope Assembly (OTA) and science processors, software, and other electronics located in the Space Support Module (SSM). The ISIM system provides structure, environment, and data handling for several modular science instruments as well as several components of the OTA optics train. An ISIM baseline design and feasibility study is ongoing at GSFC. This pre-Phase A design was developed for integration with the Yardstick NGST architecture and packaging in a 5 m class EELV fairing. The goals of this study are to: [1] demonstrate mission science feasibility, [2] assess ISIM engineering and cost feasibility, [3] identify ISIM technology challenge areas,and [4] enable smart customer procurement of the NGST. In depth results from this work beyond those displayed here can be found at: http://www701.gsfc.nasa.gov/isim/isim.htm The flight ISIM will be developed by a GSFC led IPT that includes members from the STScI and, during Phase A/B, will grow to include the NGST Prime Contractor, and science instrument development teams from European, Canadian , and US science communities. Science instruments will be competitively procured from the science community, and will be integrated into the ISIM by GSFC. The flight qualified ISIM will then be delivered by GSFC to the NGST Prime Contractor for observatory level integration. At the start of NGST Phase A (Spring 1999), two competing prime contractors will begin development of separate NGST architectures, and the ISIM IPT will develop two ISIM designs corresponding to these architectures. Down selection to a single design will occur during mid 2001. The ISIM team welcomes science community feedback. Contact the IPT lead: Matt Greenhouse: matt@stars.gsfc.nasa.gov.

  6. Assessment of apical periodontitis by MRI. A feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Geibel, M.A. [Ulm Univ. (Germany). Oral and Maxillofacial Surgery; Schreiber, E.S.; Bracher, A.K.; Rasche, V. [Ulm Univ. (Germany). Internal Medicine II; Hell, E.; Ulrici, J. [Sirona Dental Systems GmbH, Bensheim (Germany). Dental Imaging; Sailer, L.K. [DOC Praxisklinik im Wiley, Neu-Ulm (Germany). MKG; Ozpeynirci, Y. [Ulm Univ. (Germany). Diagnostic and Interventional Radiology

    2015-04-15

    The purpose of this clinical feasibility study was to evaluate the applicability of magnetic resonance imaging (MRI) for the assessment of apical periodontitis in direct comparison with cone beam CT (CBCT). 19 consecutive patients (average age 43 ± 13 years) with 34 lesions in total (13 molars, 14 premolars and 7 front teeth) were enrolled in this feasibility study. Periapical lesions were defined as periapical radiolucencies (CBCT) or structural changes in the spongy bone signal (MRI), which were connected with the apical part of a root and with at least twice the width of the periodontal ligament space. The location and dimension of the lesions were compared between MRI and CBCT. While mainly mineralized tissue components such as teeth and bone were visible with CBCT, complimentary information of the soft tissue components was assessable with MRI. The MRI images provided sufficient diagnostic detail for the assessment of the main structures of interest. Heterogeneous contrast was observed within the lesion, with often a clear enhancement close to the apical foramen and the periodontal gap. No difference for lesion visibility was observed between MRI and CBCT. The lesion dimensions corresponded well, but were slightly but significantly overestimated with MRI. A heterogeneous lesion appearance was observed in several patients. Four patients presented with a well circumscribed hyperintense signal in the vicinity of the apical foramen. The MRI capability of soft tissue characterization may facilitate detailed analysis of periapical lesions. This clinical study confirms the applicability of multi-contrast MRI for the identification of periapical lesions.

  7. Feasibility Study of Electromechanical Cylinder Drivetrain for Offshore Mechatronic Systems

    Directory of Open Access Journals (Sweden)

    Daniel Hagen

    2017-04-01

    Full Text Available Currently, there is an increasing focus on the environmental impact and energy consumption of the oil and gas industry. In offshore drilling equipment, electric motors tend to replace traditionally used hydraulic motors, especially in rotational motion control applications. However, force densities available from linear hydraulic actuators are still typically higher than those of electric actuators. Therefore, usually the remaining source of hydraulic power is thereby the hydraulic cylinder. This paper presents a feasibility study on the implementation of an electromechanical cylinder drivetrain on an offshore vertical pipe handling machine. The scope of this paper is to investigate the feasibility of a commercial off-the-shelf drivetrain. With a focus on the motion performance, numerical modeling and simulation are used when sizing and selecting the components of the considered electromechanical cylinder drivetrain. The simulation results are analyzed and discussed together with a literature study regarding advantages and disadvantages of the proposed solution considering the design criteria of offshore drilling equipment. It is concluded that the selected drivetrain can only satisfy the static motion requirements since the required transmitted power is higher than the recommended permissible power of the transmission screw. Consequently, based on the recommendation of the manufacturer, avoidance of overheating cannot be guaranteed for the drivetrain combinations considered for the case study presented in this paper. Hence, to avoid overheating, the average speed of the motion cycle must be decreased. Alternatively, external cooling or temperature monitoring and control system that prevents overheating could be implemented.

  8. Economic and technical feasibility study of compressed air storage

    Energy Technology Data Exchange (ETDEWEB)

    1976-03-01

    The results of a study of the economic and technical feasibility of compressed air energy storage (CAES) are presented. The study, which concentrated primarily on the application of underground air storage with combustion turbines, consisted of two phases. In the first phase a general assessment of the technical alternatives, economic characteristics and the institutional constraints associated with underground storage of compressed air for utility peaking application was carried out. The goal of this assessment was to identify potential barrier problems and to define the incentive for the implementation of compressed air storage. In the second phase, the general conclusions of the assessment were tested by carrying out the conceptual design of a CAES plant at two specific sites, and a program of further work indicated by the assessment study was formulated. The conceptual design of a CAES plant employing storage in an aquifer and that of a plant employing storage in a conventionally excavated cavern employing a water leg to maintain constant pressure are shown. Recommendations for further work, as well as directions of future turbo-machinery development, are made. It is concluded that compressed air storage is technically feasible for off-peak energy storage, and, depending on site conditions, CAES plants may be favored over simple cycle turbine plants to meet peak demands. (LCL)

  9. Idaho National Laboratory LDRD Annual Report FY 2012

    Energy Technology Data Exchange (ETDEWEB)

    Dena Tomchak

    2013-03-01

    This report provides a glimpse into our diverse research and development portfolio, wwhich encompasses both advanced nuclear science and technology and underlying technologies. IN keeping with the mission, INL's LDRD program fosters technical capabilities necessary to support current and future DOE-Office of Nuclear Energy research and development needs.

  10. Feasibility study of an attention training application for older adults.

    Science.gov (United States)

    Hill, Nikki L; Mogle, Jacqueline; Colancecco, Elise; Dick, Robert; Hannan, John; Lin, Feng Vankee

    2015-09-01

    Technology-based attention training has demonstrated promise in its potential to improve cognitive functioning in older people. Developing mobile applications, with older users specifically in mind, may support future dissemination of these interventions and integration into daily life. The purpose of this pilot study was to test the feasibility of an Attention Training Application (ATA) for community-dwelling older adults using mobile technology. A descriptive, mixed-methods design was used to capture older adults' feedback on the usability and acceptability of the ATA. A convenience sample of older adults (n = 9) from two independent living facilities participated in a 2-hour training and practice session with the ATA. Participants were given personally tailored instructions for using the mobile device and the ATA specifically. Following a practice session, participants provided ratings on multiple components of the ATA and completed an audio-recorded, semi-structured interview to provide detailed descriptions of their experience and perceptions. An iterative process of content analysis was used to characterise the open-ended responses. Participants rated the ATA favourably overall on several 0-10 scales including likeability [8.5 (1.6)], interest [8.8 (2.3)] and satisfaction [8.2 (1.9)]. The qualitative analyses revealed several issues relevant to the feasibility of the ATA among older people including the importance of the technological background of the user, limiting negative feedback, challenges with the touch screen interface, personal preferences for challenge, extending the practice period and the difficulty of the dual-task condition. The use of the ATA is feasible in the older adult population. Future development should specifically consider personal characteristics as well as preferences to maximise usability and acceptability among older people. Older adults enjoyed the ATA. This opens doors to user-friendly technological interventions that may be

  11. Fusion Guidance in Endovascular Peripheral Artery Interventions: A Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Sailer, Anna M., E-mail: anni.sailer@mumc.nl; Haan, Michiel W. de, E-mail: m.de.haan@mumc.nl; Graaf, Rick de, E-mail: r.de.graaf@mumc.nl; Zwam, Willem H. van, E-mail: w.van.zwam@mumc.nl [Maastricht University Medical Center, Department of Radiology (Netherlands); Schurink, Geert Willem H., E-mail: gwh.schurink@mumc.nl [Maastricht University Medical Center, Department of Surgery (Netherlands); Nelemans, Patricia J., E-mail: patty.nelemans@maastrichtuniversity.nl [Maastricht University Medical Centre, Department of Epidemiology (Netherlands); Wildberger, Joachim E., E-mail: j.wildberger@mumc.nl; Das, Marco, E-mail: m.das@mumc.nl [Maastricht University Medical Center, Department of Radiology (Netherlands)

    2015-04-15

    PurposeThis study was designed to evaluate the feasibility of endovascular guidance by means of live fluoroscopy fusion with magnetic resonance angiography (MRA) and computed tomography angiography (CTA).MethodsFusion guidance was evaluated in 20 endovascular peripheral artery interventions in 17 patients. Fifteen patients had received preinterventional diagnostic MRA and two patients had undergone CTA. Time for fluoroscopy with MRA/CTA coregistration was recorded. Feasibility of fusion guidance was evaluated according to the following criteria: for every procedure the executing interventional radiologists recorded whether 3D road-mapping provided added value (yes vs. no) and whether PTA and/or stenting could be performed relying on the fusion road-map without need for diagnostic contrast-enhanced angiogram series (CEAS) (yes vs. no). Precision of the fusion road-map was evaluated by recording maximum differences between the position of the vasculature on the virtual CTA/MRA images and conventional angiography.ResultsAverage time needed for image coregistration was 5 ± 2 min. Three-dimensional road-map added value was experienced in 15 procedures in 12 patients. In half of the patients (8/17), intervention was performed relying on the fusion road-map only, without diagnostic CEAS. In two patients, MRA roadmap showed a false-positive lesion. Excluding three patients with inordinate movements, mean difference in position of vasculature on angiography and MRA/CTA road-map was 1.86 ± 0.95 mm, implying that approximately 95 % of differences were between 0 and 3.72 mm (2 ± 1.96 standard deviation).ConclusionsFluoroscopy with MRA/CTA fusion guidance for peripheral artery interventions is feasible. By reducing the number of CEAS, this technology may contribute to enhance procedural safety.

  12. MRI-guided percutaneous nephrostomy: a feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Kariniemi, Juho; Sequeiros, Roberto Blanco; Ojala, Risto; Tervonen, Osmo [Oulu University Hospital, Department of Radiology, P.O. Box 50, Oulu (Finland)

    2009-05-15

    The purpose of this study was to assess the feasibility and safety of magnetic resonance imaging (MRI)-guided PCN in an open-configuration low-field MRI system. Eight patients were prospectively enrolled in the study. The degree of the dilatation of the renal collecting system varied from minimal to severe. All procedures were performed solely under MRI guidance with a 0.23-T open configuration C-arm-shaped MRI system with interventional optical tracking. In each case, PCN was performed with a MRI-compatible drainage kit using the Seldinger technique. Seven out of eight nephrostomies were successfully performed under MRI guidance. All PCN procedures in dilated renal collection systems were successful; however, nephrostomy catheter could not be placed in a nondilated system. The mean time needed for the MRI-guided PCN was 26 min. No major complications occurred during the procedure or follow-up. MRI-guided PCN in dilated renal collection system is feasible and safe. The presented technique has limitations that necessitate further technical developments before the procedure can be applied to nondilated kidneys and recommended for routine clinical use. (orig.)

  13. Battery energy storage market feasibility study -- Expanded report

    Energy Technology Data Exchange (ETDEWEB)

    Kraft, S. [Frost and Sullivan, Mountain View, CA (United States); Akhil, A. [Sandia National Labs., Albuquerque, NM (United States). Energy Storage Systems Analysis and Development Dept.

    1997-09-01

    Under the sponsorship of the US Department of Energy`s Office of Utility Technologies, the Energy Storage Systems Analysis and Development Department at Sandia National Laboratories (SNL) contracted Frost and Sullivan to conduct a market feasibility study of energy storage systems. The study was designed specifically to quantify the battery energy storage market for utility applications. This study was based on the SNL Opportunities Analysis performed earlier. Many of the groups surveyed, which included electricity providers, battery energy storage vendors, regulators, consultants, and technology advocates, viewed battery storage as an important technology to enable increased use of renewable energy and as a means to solve power quality and asset utilization issues. There are two versions of the document available, an expanded version (approximately 200 pages, SAND97-1275/2) and a short version (approximately 25 pages, SAND97-1275/1).

  14. Anticipatory precrash restraint sensor feasibility study: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Kercel, S.W.; Dress, W.B.

    1995-08-01

    This report explores feasibility of an anticipatory precrash restraint sensor. The foundation principle is the anticipation mechanism found at a primitive level of biological intelligence and originally formalized by the mathematical biologist Robert Rosen. A system based on formal anticipatory principles should significantly outperform conventional technologies. It offers the prospect of high payoff in prevention of death and injury. Sensors and processes are available to provide a good, fast, and inexpensive description of the present dynamical state of the vehicle to the embedded system model in the anticipation engine. The experimental part of this study found that inexpensive radar in a real-world setting does return useful data on target dynamics. The data produced by a radar system can be converted to target dynamical information by good, fast and inexpensive signal-processing techniques. Not only is the anticipatory sensor feasible, but further development under the sponsorship of the National Highway Traffic Safety Administration is necessary and desirable. There are a number of possible lines of follow-on investigation. The level of effort and expected benefits of various alternatives are discussed.

  15. A feasibility study for a manufacturing technology deployment center

    Energy Technology Data Exchange (ETDEWEB)

    1994-10-31

    The Automation & Robotics Research Institute (ARRI) and the Texas Engineering Extension Service (TEEX) were funded by the U.S. Department of Energy to determine the feasibility of a regional industrial technology institute to be located at the Superconducting Super Collider (SSC) Central Facility in Waxahachie, Texas. In response to this opportunity, ARRI and TEEX teamed with the DOE Kansas City Plant (managed by Allied Signal, Inc.), Los Alamos National Laboratory (managed by the University of California), Vought Aircraft Company, National Center for Manufacturing Sciences (NCMS), SSC Laboratory, KPMG Peat Marwick, Dallas County Community College, Navarro Community College, Texas Department of Commerce (TDOC), Texas Manufacturing Assistance Center (TMAC), Oklahoma Center for the Advancement of Science and Technology, Arkansas Science and Technology Authority, Louisiana Productivity Center, and the NASA Mid-Continent Technology Transfer Center (MCTTC) to develop a series of options, perform the feasibility analysis and secure industrial reviews of the selected concepts. The final report for this study is presented in three sections: Executive Summary, Business Plan, and Technical Plan. The results from the analysis of the proposed concept support the recommendation of creating a regional technology alliance formed by the states of Texas, New Mexico, Oklahoma, Arkansas and Louisiana through the conversion of the SSC Central facility into a Manufacturing Technology Deployment Center (MTDC).

  16. Initial Feasibility Study to Drill and Core the Ocean Mantle

    Directory of Open Access Journals (Sweden)

    Nicolas Pilisi

    2011-09-01

    Full Text Available An initial feasibility study (Pilisi and Whitney, 2011 of drilling through the Mohorovičić discontinuity (Moho into the oceanic mantle specifically focused on future requirements for planning, drilling and coring a hole 500 m into the oceanic mantle from three candidate locations in the Pacific Ocean (Cocos Plate, Baja California, and offshore Hawaii. The study points out some of the critical issues that need to be resolved before embarking upon such a challengingproject. It was conducted on the basis of data provided by the Integrated Ocean Drilling Program–Management International (IODP-MI, the Center for Deep Earth Exploration (CDEX operating the drilling vessel Chikyu within IODP, public domain information, and past experience that Blade Energy Partners (hereafter mentioned as “Blade”; http://www.blade-energy.com/ has had with frontier projects in the offshore deepwater oil and gas and geothermal industries.

  17. Feasibility studies for assessing internal exposure to {sup 233}U

    Energy Technology Data Exchange (ETDEWEB)

    Mehta, D.J.; Sharma, R.C.; Ramanujam, A.; Haridasan, T.K.; Sawant, P.D.; Rathinam, M

    2003-07-01

    The potential internal occupational exposure encountered as a consequence of the {sup 232}Th-{sup 233}U fuel cycle are likely to arise predominantly from the inhalation of {sup 232}Th, {sup 233}U and ({sup 232}Th + {sup 233}U) compounds of absorption Types M and S. In the past, although direct and indirect methods for assessments of internal exposure to {sup 232}Th and its daughters were developed, standardised and employed, no such attempts have been made with regard to {sup 233}U and {sup 233}U+{sup 232}Th. Therefore, feasibility studies for assessing internal exposures to {sup 233}U have been conducted using three methods: urine bioassay, in vivo counting and measurement of thoron gas in the exhaled breath of a worker. This paper describes details of these studies and discusses the results obtained. (author)

  18. 41 CFR 101-5.104-3 - Data requirements for feasibility studies.

    Science.gov (United States)

    2010-07-01

    ... feasibility studies. 101-5.104-3 Section 101-5.104-3 Public Contracts and Property Management Federal Property... FEDERAL BUILDINGS AND COMPLEXES 5.1-General § 101-5.104-3 Data requirements for feasibility studies. (a) The data requirements for feasibility studies may vary from program to program, but shall be...

  19. 77 FR 13343 - Pilot Program for Early Feasibility Study Investigational Device Exemption Applications...

    Science.gov (United States)

    2012-03-06

    ... HUMAN SERVICES Food and Drug Administration Pilot Program for Early Feasibility Study Investigational... for early feasibility study IDE applications. FDA is also announcing that the duration of the pilot... ``Investigational Device Exemptions (IDE) for Early Feasibility Medical Device Clinical Studies, Including...

  20. 77 FR 74668 - Compliance Policy Guide; Radiofrequency Identification Feasibility Studies and Pilot Programs for...

    Science.gov (United States)

    2012-12-17

    ... Feasibility Studies and Pilot Programs for Drugs; Notice To Extend Expiration Date AGENCY: Food and Drug... ``Radiofrequency Identification (RFID) Feasibility Studies and Pilot Programs for Drugs'' to December 31, 2014. FOR... (RFID) Feasibility Studies and Pilot Programs for Drugs.'' Previous extensions of the expiration date...

  1. Computer vision for dual spacecraft proximity operations -- A feasibility study

    Science.gov (United States)

    Stich, Melanie Katherine

    A computer vision-based navigation feasibility study consisting of two navigation algorithms is presented to determine whether computer vision can be used to safely navigate a small semi-autonomous inspection satellite in proximity to the International Space Station. Using stereoscopic image-sensors and computer vision, the relative attitude determination and the relative distance determination algorithms estimate the inspection satellite's relative position in relation to its host spacecraft. An algorithm needed to calibrate the stereo camera system is presented, and this calibration method is discussed. These relative navigation algorithms are tested in NASA Johnson Space Center's simulation software, Engineering Dynamic On-board Ubiquitous Graphics (DOUG) Graphics for Exploration (EDGE), using a rendered model of the International Space Station to serve as the host spacecraft. Both vision-based algorithms proved to attain successful results, and the recommended future work is discussed.

  2. Feasibility study for a transportation operations system cask maintenance facility

    Energy Technology Data Exchange (ETDEWEB)

    Rennich, M.J.; Medley, L.G.; Attaway, C.R.

    1991-01-01

    The US Department of Energy (DOE), Office of Civilian Radioactive Waste Management (OCRWM) is responsible for the development of a waste management program for the disposition of spent nuclear fuel (SNF) and high-level waste (HLW). The program will include a transportation system for moving the nuclear waste from the sources to a geologic repository for permanent disposal. Specially designed casks will be used to safely transport the waste. The cask systems must be operated within limits imposed by DOE, the Nuclear Regulatory Commission (NRC), and the Department of Transportation (DOT). A dedicated facility for inspecting, testing, and maintaining the cask systems was recommended by the General Accounting Office (in 1979) as the best means of assuring their operational effectiveness and safety, as well as regulatory compliance. In November of 1987, OCRWM requested a feasibility study be made of a Cask Maintenance Facility (CMF) that would perform the required functions. 46 refs., 16 figs., 13 tabs.

  3. Adaptive multibeam antennas for spacelab. Phase A: Feasibility study

    Science.gov (United States)

    Allen, C. C.; Applebaum, S. P.; Popowsky, W. J.; Wouch, G.

    1976-01-01

    The feasibility was studied of using adaptive multibeam multi-frequency antennas on the spacelab, and to define the experiment configuration and program plan needed for a demonstration to prove the concept. Three applications missions were selected, and requirements were defined for an L band communications experiment, an L band radiometer experiment, and a Ku band communications experiment. Reflector, passive lens, and phased array antenna systems were considered, and the Adaptive Multibeam Phased Array (AMPA) was chosen. Array configuration and beamforming network tradeoffs resulted in a single 3m x 3m L band array with 576 elements for high radiometer beam efficiency. Separate 0.4m x 0.4 m arrays are used to transmit and receive at Ku band with either 576 elements or thinned apertures. Each array has two independently steerable 5 deg beams, which are adaptively controlled.

  4. Feasibility studies for a wireless 60 GHz tracking detector readout

    CERN Document Server

    Dittmeier, Sebastian; Soltveit, Hans Kristian; Wiedner, Dirk

    2016-01-01

    The amount of data produced by highly granular silicon tracking detectors in high energy physics experiments poses a major challenge to readout systems. At high collision rates, e.g. at LHC experiments, only a small fraction of data can be read out with currently used technologies. To cope with the requirements of future or upgraded experiments new data transfer techniques are required which offer high data rates at low power and low material budget. Wireless technologies operating in the 60 GHz band or at higher frequencies offer high data rates and are thus a promising upcoming alternative to conventional data transmission via electrical cables or optical fibers. Using wireless technology, the amount of cables and connectors in detectors can be significantly reduced. Tracking detectors profit most from a reduced material budget as fewer secondary particle interactions (multiple Coulomb scattering, energy loss, etc.) improve the tracking performance in general. We present feasibility studies regarding the in...

  5. Feasibility Studies on Underwater Laser Surface Hardening Process

    Directory of Open Access Journals (Sweden)

    Biao Jin

    2015-01-01

    Full Text Available Laser surface hardening process is a very promising hardening method for ferrous and nonferrous alloys where transformations occur during cooling after laser melting in the solid state. This study experimentally characterizes laser surface hardening of tool steel in both water and air. For the underwater operation, laser surface scanning is performed over the tool steel surface which is immersed in water. The laser surface hardening tests are performed with a maximum 200 W fiber laser with a Gaussian distribution of energy in the beam. For the surface hardening, single-track melting experiment which sequentially scans elongated path of single line has been performed. As the hardened depth depends on the thermal conductivity of the material, the surface temperature and the penetration depth may be varied by underwater laser processing. The feasibility of underwater laser surface hardening process is discussed on the basis of average hardness level and hardened bead shape.

  6. Feasibility study of a superconducting motor for electrical helicopter propulsion

    Science.gov (United States)

    Simons, C. A. B. A. E.; Sanabria-Walter, C.; Polinder, H.

    2014-05-01

    During the past decades, superconducting electrical machines have become more suitable to replace conventional iron based designs, because of their lower weight and higher torque density. These properties make them good candidates for use in More Electric Aircraft (MEA). Especially helicopter propulsion systems could benefit from the increased performance. This paper describes the feasibility study of a superconducting motor to be used for helicopter propulsion as part of a More Electric Aircraft (MEA). For this, the armature, field windings and cryostat are designed, aiming at meeting the difficult specifications. Since superconductors have virtually no electrical resistance when cooled down below a certain critical temperature, they can be used to build high field and low weight coils for electrical machines. Especially the possibility to not use iron can make the superconducting motor lighter with a higher power density compared with conventional Permanent Magnet (PM) motors.

  7. Preparing tomorrow's health sciences librarians: feasibility and marketing studies.

    Science.gov (United States)

    Moran, B B; Jenkins, C G; Friedman, C P; Lipscomb, C E; Gollop, C J; Moore, M E; Morrison, M L; Tibbo, H R; Wildemuth, B M

    1996-10-01

    The University of North Carolina at Chapel Hill is devising and evaluating five curricular models designed to improve education for health sciences librarianship. These models fit into a continual learning process from the initial professional preparation to lifelong learning opportunities. Three of them enhance existing degree and certificate programs in the School of Information and Library Science (SILS) with a health sciences specialization, and two are new programs for working information professionals. The approaches involve partnerships among SILS, the Health Sciences Library, and the program in Medical Informatics. The planning process will study the feasibility of the proposed programs, test the marketability of the models to potential students and employers, and make recommendations about implementation.

  8. Feasibility Study: Potential Enhancements for the LLNL Renewables Website

    Energy Technology Data Exchange (ETDEWEB)

    Kearns, F; Krawchuk, M; Moritz, M; Stephens, S; Goldstein, N

    2008-01-25

    This feasibility study investigates additional improvements/extensions to the LLNL Renewables Website. Currently, the Renewables Website focuses on wind energy in California. Future enhancements will include other renewable energy sources. The extensions described below are focused along two separate yet related avenues: (1) Forecasting wildfire risk in the regions of California where new development may occur, as a part of the 'Million Solar Roofs' program. (2) Gaining a better understanding of the ecological components and potential of biofuels from forests in California. These two avenues are further described in the report. Following is a technical description of the Center for Fire Research and Outreach computing and web service capabilities.

  9. The E-ELT project: the feasibility study

    Science.gov (United States)

    Marchiori, G.; De Lorenzi, S.; Busatta, A.; Giacomel, L.

    2008-07-01

    Status of the Feasibility Study of E-ELT, the ESO 42m Extreme Large Telescope, with emphasis on the Telescope architecture, manufacturing and erection. The new generation of Extremely Large Telescope, requires the identification of different technologies, in order to improve the stiffness to weight ratio of the structure, to introduce higher damping while maintaining under control the construction and maintenance costs. The identification of different construction technologies and the consequent development of the materials used, may allow to obtain a leading technological instrument able to meet also the most extreme scientific request, able to adapt to the new requests that might be raised along the life of the telescope. The control of the weight of the structure is extremely important for the dimensioning of the auxiliary structures, for energy management, and for the problems related to pre-assembly, disassembly in factory and erection on site.

  10. Technical Feasibility Study for Zero Energy K-12 Schools

    Energy Technology Data Exchange (ETDEWEB)

    Pless, Shanti D.; Torcellini, Paul A.; Bonnema, Eric; Goldwasser, David

    2016-08-26

    A simulation-based technical feasibility study was completed to show the types of technologies required to achieve ZEB status with this building type. These technologies are prioritized across the building's subsystem such that design teams can readily integrate the ideas. Energy use intensity (EUI) targets were established for U.S. climate zones such that K-12 schools can be zero-ready or can procure solar panels or other renewable energy production sources to meet the zero energy building definition. Results showed that it is possible for K-12 schools to achieve zero energy when the EUI is between 20 and 26 kBtu/ft2/yr. Temperate climates required a smaller percentage of solar panel coverage than very hot or very cold climates. The paper provides a foundation for technically achieving zero energy schools with a vision of transforming the school construction market to mainstream zero energy buildings within typical construction budgets.

  11. Covert air vehicle 2003 LDRD final report.

    Energy Technology Data Exchange (ETDEWEB)

    Spletzer, Barry Louis; Callow, Diane Schafer; Salton, Jonathan Robert; Fischer, Gary John

    2003-11-01

    This report describes the technical work carried out under a 2003 Laboratory Directed Research and Development project to develop a covert air vehicle. A mesoscale air vehicle that mimics a bird offers exceptional mobility and the possibility of remaining undetected during flight. Although some such vehicles exist, they are lacking in key areas: unassisted landing and launching, true mimicry of bird flight to remain covert, and a flapping flight time of any real duration. Current mainstream technology does not have the energy or power density necessary to achieve bird like flight for any meaningful length of time; however, Sandia has unique combustion powered linear actuators with the unprecedented high energy and power density needed for bird like flight. The small-scale, high-pressure valves and small-scale ignition to make this work have been developed at Sandia. We will study the feasibility of using this to achieve vehicle takeoff and wing flapping for sustained flight. This type of vehicle has broad applications for reconnaissance and communications networks, and could prove invaluable for military and intelligence operations throughout the world. Initial tests were conducted on scaled versions of the combustion-powered linear actuator. The tests results showed that heat transfer and friction effects dominate the combustion process at 'bird-like' sizes. The problems associated with micro-combustion must be solved before a true bird-like ornithopter can be developed.

  12. A Preliminary Feasibility Study On Seismic Monitoring Of Polymer Flooding

    Science.gov (United States)

    Nguyen, P. K.; Park, C.; Lim, B.; Nam, M.

    2012-12-01

    Polymer flooding using water with soluble polymers is an enhanced oil recovery technique, which intends to maximize oil-recovery sweep efficiency by minimizing fingering effects and as a result creating a smooth flood front; polymer flooding decreases the flow rates within high permeability zone while enhances those of lower permeabilities. Understanding of fluid fronts and saturations is critical to not only optimizing polymer flooding but also monitoring the efficiency. Polymer flooding monitoring can be made in single well scale with high-resolution wireline logging, in inter-well scale with tomography, and in reservoir scale with surface survey. For reservoir scale monitoring, this study makes a preliminary feasibility study based on constructing rock physics models (RPMs), which can bridge variations in reservoir parameters to the changes in seismic responses. For constructing RPMs, we change reservoir parameters with consideration of polymer flooding to a reservoir. Time-lapse seismic data for corresponding RPMs are simulated using a time-domain staggered-finite-difference modeling with implementation of a boundary condition of conventional perfect match layer. Analysis on time-lapse seismic data with respect to the changes in fluid front and saturation can give an insight on feasibility of surface seismic survey to polymer flooding. Acknowledgements: This work was supported by the Energy Efficiency & Resources of the Korea Institute of Energy Technology Evaluation and Planning (KETEP) grant funded by the Korea government Ministry of Knowledge Economy (No. 2012T100201588). Myung Jin Nam was partially supported by the National Research Foundation of Korea(NRF) grant funded by the Korea government(MEST) (No. 2011-0014684).

  13. Feasibility Study on Soilless Cultivation of Organic Ginseng

    Institute of Scientific and Technical Information of China (English)

    Yuji JIN; Hongyan ZHAO; Xiangguo LI; Renzhe PIAO

    2015-01-01

    Based on the present situation and problems concerning ginseng cultivation as well as soilless cultivation features,we analyze the growth indicators and input-output ratio of different ginseng cultivation patterns,and conform that the soilless cultivation technology for organic ginseng is feasible. And this technology provides theoretical basis and technological feasibility for the sustainable development of ginseng industry.

  14. Feasibility of remote sensing for detecting thermal pollution. Part 1: Feasibility study. Part 2: Implementation plan. [coastal ecology

    Science.gov (United States)

    Veziroglu, T. N.; Lee, S. S.

    1973-01-01

    A feasibility study for the development of a three-dimensional generalized, predictive, analytical model involving remote sensing, in-situ measurements, and an active system to remotely measure turbidity is presented. An implementation plan for the development of the three-dimensional model and for the application of remote sensing of temperature and turbidity measurements is outlined.

  15. Potential for up-scaling Nimr reed bed facilities, Oman : feasibility study

    NARCIS (Netherlands)

    Schrevel, A.; Hellegers, P.J.G.J.; Soppe, R.W.O.

    2004-01-01

    This report describes the findings of a feasibility study to treat oil contaminated water using reed beds, and consume the treated saline water using forestry. The feasibility study focused on the social, technical and economical feasibility of a project designed to process 45,000 m3 of water per da

  16. Feasibility Study on the Development of Proton Accelerator II

    Energy Technology Data Exchange (ETDEWEB)

    Whang, Ki Woong [Korea Accelerator and Plasma Research Association, Seoul (Korea, Republic of)

    1997-09-01

    Present status and research trend of KOMAC (Korea Multipurpose Accelerator Complex)-grade accelerator construction in Europe, Japan, America, and Russia are surveyed in view of basic nuclear technology study in 2nd feasibility study on the KOMAC. KOMAC can be applied to study the increasing of nuclear reactor safety, the Proto-plant of transmutation technology for low cost nuclear fuel, the nuclear data production, the life science, mechanical dynamics, the structure probe, the radioisotope production, the cancer therapy, and the defense industry etc. And also KOMAC structure selection is investigated in point of utilization aims referred from various proposal of LANL and ORNL in USA, Neutron Science Research program in Japan, Energy Amplifier in Europe, and Institute of Theoretical and Experimental physics in Russia. As a result of meeting, study team is approached to the conclusion the KOMAC should be constructed to get the nuclear transmutation technology and the world leadership in future nuclear industry. Member`s opinion of study team agreed new nuclear technology, such as Accelerator Driven Energy Amplifier will be possible to sustain a survival of human being in post 21c. 7 tabs., 10 figs. (author)

  17. Istra district heating system. Master plan and feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-09-01

    This report presents the results of the Feasibility Study of options for improving the efficiency and operating economy of Istra Large-Scale Demonstration Project includes all areas of the town of Istra. However, the Feasibility Study is confined to the five largest adjoining boilers plant areas within the borders of Istra town. The study was conducted from 1999 to 2001 and was based on information collected during this period. The city administration and the district heating company in Istra provided the data. The company RDIEE, Russian Danish Institute for Energy Efficiency, in Istra collected and processed the data under the conduction of Carl Bro a/s in Denmark. The main objectives of the study are to provide the Istra DHC with a number of options for future development of the district heating system based on technical/financial analyses and presenting the best possibilities for improved comfort, operation and business development. More concretely, one or more system improvement scenarios, which can be implemented in the near future as a first step of the recommended medium-term to long-term development, are identified. Another important objective has been to train the specialists of RDIEE in the feasibility study process and to transfer know-how, skills and tools. The model used for this study is adapted to the features and the special problems to be addressed in relation to the Istra district heating system. RDIEE and Istra DHC are thereby provided with a useful tool which may be used for continued study and development after the first phase project has been completed. As usual in the case of input/output models the quality of the results depends very much on the quality of input data. The present report is exclusively based on the consultant's understanding of the provided information. The results and the underlying inputs should be carefully considered before any final decision concerning implementation is taken. Verification of assumptions should also

  18. Feasibility Study for Renewable Energy Development on Tribal Lands

    Energy Technology Data Exchange (ETDEWEB)

    John Hendrix, Project Director; Charles Weir, Project Manager; Dr. John Plodinec, Technology Advisor; Dr. Steve Murray, Economic Advisor

    2005-07-21

    Project Objective: The Mississippi Band of Choctaw Indians (MBCI) conducted a study of the feasibility of siting a renewable energy biomass-based installation on tribal lands. The purpose of the study was to determine whether such an installation can be economically sustainable, as well as consistent with the cultural, social, and economic goals of the Tribe. Scope: To achieve the goal of the feasibility study, the following tasks were carried out: (1) Resource availability assessment--The objective of this assessment was to determine the availability of both poultry litter and wood residues for use in the proposed facility. (2) Power utilization assessment--The objective of this assessment was to determine the potential market size for power produced, the existing infrastructure for delivering power to that market, and the costs and economic returns for doing so. (3) Technology review--The objective of this review was to identify one, or more, technical options for detailed economic and technical assessment. The study considered a range of feedstock and product mixtures of poultry litter; wood residues as feedstock; and electrical power and other ancillary products as outputs. Distributed power sources was also examined. Technologies ranging from gasification to systems that produce both power and value-added chemicals were considered. Technologies selected for detailed review were those that can be sized to process the amount of available feed (poultry litter, or poultry litter and wood residues), and that also appear to make economic sense in terms of the value of their inputs. The technology review leaned heavily on the experience from similar prior DOE projects, particularly those conducted by the National Renewable Energy Laboratory (NREL). NREL was involved in a consultative role, so that the project team could leverage their experience. (4) Systems Design(s)--Based on the technology review, a pre-conceptual design for an installation was developed. This

  19. Feasibility study of CT perfusion imaging for prostate carcinoma

    Energy Technology Data Exchange (ETDEWEB)

    Cullu, Nesat [Mugla Sitki Kocman University, School of Medicine, Department of Radiology, Mugla (Turkey); Atatuerk University, School of Medicine, Department of Radiology, Erzurum (Turkey); Kantarci, Mecit; Ogul, Hayri; Pirimoglu, Berhan; Karaca, Leyla; Kizrak, Yesim [Atatuerk University, School of Medicine, Department of Radiology, Erzurum (Turkey); Adanur, Senol; Koc, Erdem; Polat, Ozkan [Atatuerk University, School of Medicine, Department of Urology, Erzurum (Turkey); Okur, Aylin [Atatuerk University, School of Medicine, Department of Radiology, Erzurum (Turkey); Bozok University, School of Medicine, Department of Radiology, Yozgat (Turkey)

    2014-09-15

    The aim of this feasibility study was to obtain initial data with which to assess the efficiency of perfusion CT imaging (CTpI) and to compare this with magnetic resonance imaging (MRI) in the diagnosis of prostate carcinoma. This prospective study involved 25 patients with prostate carcinoma undergoing MRI and CTpI. All analyses were performed on T2-weighted images (T2WI), apparent diffusion coefficient (ADC) maps, diffusion-weighted images (DWI) and CTp images. We compared the performance of T2WI combined with DWI and CTp alone. The study was approved by the local ethics committee, and written informed consent was obtained from all patients. Tumours were present in 87 areas according to the histopathological results. The diagnostic performance of the T2WI+DWI+CTpI combination was significantly better than that of T2WI alone for prostate carcinoma (P < 0.001). The diagnostic value of CTpI was similar to that of T2WI+DWI in combination. There were statistically significant differences in the blood flow and permeability surface values between prostate carcinoma and background prostate on CTp images. CTp may be a valuable tool for detecting prostate carcinoma and may be preferred in cases where MRI is contraindicated. If this technique is combined with T2WI and DWI, its diagnostic value is enhanced. (orig.)

  20. Feasibility of a porcine oral mucosa equivalent: a preclinical study.

    Science.gov (United States)

    Kinikoglu, Beste; Hemar, Julie; Hasirci, Vasif; Breton, Pierre; Damour, Odile

    2012-08-01

    Oral tissue engineering aims to treat and fill tissue deficits caused by congenital defects, facial trauma, or malignant lesion surgery, as well as to study the biology of oral mucosa. The Food and Drug Administration (FDA) and the European Medicines Agency (EMA) require a large animal model to evaluate cell-based devices, including tissue-engineered oral mucosa, prior to initiating human clinical studies. Porcine oral mucosa is non-keratinized and resembles that of humans more closely than any other animal in terms of structure and composition; however, there have not been any reports on the reconstruction of a porcine oral mucosa equivalent, probably due to the difficulty to culture porcine fibroblasts. In this study, we demonstrate the feasibility of a 3D porcine oral mucosa equivalent based on a collagen-GAG-chitosan scaffold, as well as reconstructed porcine epithelium by using an amniotic membrane as support, or without any support in form of epithelial cell sheets by using thermoresponsive culture plates. Explants technique was used for the isolation of the porcine fibroblasts and a modified fibroblast medium containing 20% fetal calf serum was used for their culture. The histological and transmission electron microscopic analyses of the resulting porcine oral mucosa models showed the presence of non-keratinized epithelia expressing keratin 13, the major differentiation marker of non-keratinized oral mucosa, in all models, and the presence of newly synthesized collagen fibers in the lamina propria equivalent of the full-thickness model, indicating the functionality of porcine fibroblasts.

  1. Study on Feasibility of MBO in College Management

    Science.gov (United States)

    Liu, Xihuai

    2009-01-01

    At first, MBO was widely applied in management of enterprises. This paper organically makes some characteristics of MBO and college management together to talk about the feasibility of MBO in college management.

  2. Canton hydroelectric project: feasibility study. Final report, appendices

    Energy Technology Data Exchange (ETDEWEB)

    1979-05-01

    These appendices contain legal, environmental, regulatory, technical and economic information used in evaluating the feasibility of redeveloping the hydroelectric power generating facilities at the Upper and Lower Dams of the Farmington River at Collinsville, CT. (LCL)

  3. A Feasibility Study of Space VLBI for Geodesy and Geodynamics

    Science.gov (United States)

    Kulkarni, Madhav Narayan

    1992-01-01

    Space Very Long Baseline Interferometry (VLBI) is an extension of the ground based VLBI to the space. With the launching of two or more Space VLBI satellites in the future, Space VLBI observations will be available for astrometric, geodetic and geodynamic applications. This new technique holds potential for various important applications including monitoring Earth rotation and interconnection of the reference frames used in geodesy and geodynamics. The aim of this feasibility study has been to investigate the possibility of precise estimation of geodetic parameters, with emphasis on the Earth rotation parameters (ERP's), from Space VLBI observations. A brief description of the Space VLBI technique, it's possible applications, and the Space VLBI missions being planned has been given. Estimability analysis to investigate the estimability of geodetic parameters from Space VLBI observations has been carried out and a simplified mathematical model is derived in terms of estimable parameters. Results of sensitivity analysis carried out to study the sensitivity of the Space VLBI observables to the geodetic parameters of interest, including the number of these parameters and random errors in their a priori values, have been presented. Some of the dominant systematic effects including atmospheric refraction, solar radiation pressure and relativistic effects have also been investigated. Simulation studies have been carried out to study the influence of these systematic effects and a priori information on the estimation of the Earth rotation parameters. The results from the simulation studies indicate that it may be possible to use the Space VLBI technique for monitoring Earth rotation and polar motion, only if the orbital systematic effects can be modeled to a high degree of accuracy (or the satellites can be tracked, with high accuracy, independently), and precise a priori information on station coordinates from other sources is used. A brief description of the Space VLBI

  4. Feasibility studies for a wireless 60 GHz tracking detector readout

    Science.gov (United States)

    Dittmeier, S.; Schöning, A.; Soltveit, H. K.; Wiedner, D.

    2016-09-01

    The amount of data produced by highly granular silicon tracking detectors in high energy physics experiments poses a major challenge to readout systems. At high collision rates, e.g. at LHC experiments, only a small fraction of data can be read out with currently used technologies. To cope with the requirements of future or upgraded experiments new data transfer techniques are required which offer high data rates at low power and low material budget. Wireless technologies operating in the 60 GHz band or at higher frequencies offer high data rates and are thus a promising upcoming alternative to conventional data transmission via electrical cables or optical fibers. Using wireless technology, the amount of cables and connectors in detectors can be significantly reduced. Tracking detectors profit most from a reduced material budget as fewer secondary particle interactions (multiple Coulomb scattering, energy loss, etc.) improve the tracking performance in general. We present feasibility studies regarding the integration of the wireless technology at 60 GHz into a silicon tracking detector. We use spare silicon strip modules of the ATLAS experiment as test samples which are measured to be opaque in the 60 GHz range. The reduction of cross talk between links and the attenuation of reflections is studied. An estimate of the maximum achievable link density is given. It is shown that wireless links can be placed as close as 2 cm next to each other for a layer distance of 10 cm by exploiting one or several of the following measures: highly directive antennas, absorbers like graphite foam, linear polarization and frequency channeling. Combining these measures, a data rate area density of up to 11 Tb/(s·m2) seems feasible. In addition, two types of silicon sensors are tested under mm-wave irradiation in order to determine the influence of 60 GHz data transmission on the detector performance: an ATLAS silicon strip sensor module and an HV-MAPS prototype for the Mu3e

  5. Feasibility studies for a wireless 60 GHz tracking detector readout

    Energy Technology Data Exchange (ETDEWEB)

    Dittmeier, S., E-mail: dittmeier@physi.uni-heidelberg.de; Schöning, A.; Soltveit, H.K.; Wiedner, D.

    2016-09-11

    The amount of data produced by highly granular silicon tracking detectors in high energy physics experiments poses a major challenge to readout systems. At high collision rates, e.g. at LHC experiments, only a small fraction of data can be read out with currently used technologies. To cope with the requirements of future or upgraded experiments new data transfer techniques are required which offer high data rates at low power and low material budget. Wireless technologies operating in the 60 GHz band or at higher frequencies offer high data rates and are thus a promising upcoming alternative to conventional data transmission via electrical cables or optical fibers. Using wireless technology, the amount of cables and connectors in detectors can be significantly reduced. Tracking detectors profit most from a reduced material budget as fewer secondary particle interactions (multiple Coulomb scattering, energy loss, etc.) improve the tracking performance in general. We present feasibility studies regarding the integration of the wireless technology at 60 GHz into a silicon tracking detector. We use spare silicon strip modules of the ATLAS experiment as test samples which are measured to be opaque in the 60 GHz range. The reduction of cross talk between links and the attenuation of reflections is studied. An estimate of the maximum achievable link density is given. It is shown that wireless links can be placed as close as 2 cm next to each other for a layer distance of 10 cm by exploiting one or several of the following measures: highly directive antennas, absorbers like graphite foam, linear polarization and frequency channeling. Combining these measures, a data rate area density of up to 11 Tb/(s·m{sup 2}) seems feasible. In addition, two types of silicon sensors are tested under mm-wave irradiation in order to determine the influence of 60 GHz data transmission on the detector performance: an ATLAS silicon strip sensor module and an HV-MAPS prototype for the Mu3e

  6. Towards optimal imaging with PET: an in silico feasibility study

    Science.gov (United States)

    McNamara, A. L.; Toghyani, M.; Gillam, J. E.; Wu, K.; Kuncic, Z.

    2014-12-01

    The efficacy of Positron Emission Tomography (PET) imaging relies fundamentally on the ability of the system to accurately identify true coincidence events. With existing systems, this is currently accomplished with an energy acceptance criterion followed by correction techniques to remove suspected false coincidence events. These corrections generally result in signal and contrast loss and thus limit the PET system’s ability to achieve optimum image quality. A key property of annihilation radiation is that the photons are polarised with respect to each other. This polarisation correlation offers a potentially powerful discriminator, independent of energy, to accurately identify true events. In this proof of concept study, we investigate how photon polarisation information can be exploited in PET imaging by developing a method to discriminate true coincidences using the polarisation correlation of annihilation pairs. We implement this method using a Geant4 PET simulation of a GE Advance/Discovery LS system and demonstrate the potential advantages of the polarisation coincidence selection method over a standard energy criterion method. Current PET ring detectors are not capable of exploiting the polarisation correlation of the photon pairs. Compton PET systems, however are promising candidates for this application. We demonstrate the feasibility of a two-component Compton camera system in identifying true coincidences with Monte Carlo simulations. Our study demonstrates the potential of improving signal gain using polarisation, particularly for high photon emission rates. We also demonstrate the ability of the Compton camera at exploiting this polarisation correlation in PET.

  7. Feasibility study of an image slicer for future space application

    Science.gov (United States)

    Calcines, A.; Ichimoto, K.

    2014-08-01

    This communication presents the feasibility study of an image slicer for future space missions, especially for the integral field unit (IFU) of the SUVIT (Solar UV-Visible-IR telescope) spectro-polarimeter on board the Japanese-led solar space mission Solar-C as a backup option. The MuSICa (Multi-Slit Image slicer based on collimator-Camera) image slicer concept, originally developed for the European Solar Telescope, has been adapted to the SUVIT requirements. The IFU will reorganizes a 2-D field of view of 10 x 10 arcsec2 into three slits of 0.18 arcsec width by 185.12 arcsec length using flat slicer mirrors of 100 μm width. The layout of MuSICa for Solar-C is telecentric and offers an optical quality limited by diffraction. The entrance for the SUVIT spectro-polarimeter is composed by the three IFU slits and one ordinal long slit to study, using high resolution spectro-polarimetry, the solar atmosphere (Photosphere and Chromosphere) within a spectral range between 520 nm (optionally 280 nm) and 1,100 nm.

  8. Feasibility study on pliant media drying using fluidized bed dryer

    Science.gov (United States)

    Zakaria, J. H.; Zaid, M. H. H. M.; Batcha, M. F. M.; Asmuin, N.

    2015-09-01

    The usage of pliant media for blasting in surface preparation has gained substantial interest in various industries, particularly oil and gas. Being a clean technology, this relatively new method of surface preparation has become an alternative to conventional abrasive blasting technique which lowers fugitive emissions from blasting process and hence lowering risk to workers in the industry. Despite proven to be effective and cost efficient, the usage of pliant media in tropical climate poses a new challenge due to the torrential rain in the monsoon season. During rainy and wet conditions, the pliant media was literally soaked and the recovery rate of the pliant media for a continuous blasting becomes retarded. A viable technique for drying of this pliant media has then become imperative. The present study proposes to dry water laden pliant media in a Swirling Fluidized Bed Dryer (SFBD). In this preliminary study, three bed loadings of 1.7, 2.0 and 2.3 kg of pliant media was dried in the SfBd at 80°C, 90°C and 100°C. The experimental works revealed that the SFBD has shown excellent potential to dry the pliant media with a relatively short drying time. The behaviour of moisture ratio and drying rate against time are discussed. The findings conclude that the SFBD is a feasible technique for wet pliant media drying and can be extended for continuous processing system.

  9. Reconnaissance Feasibility Study: Hydroelectric Potential on Lowell Creek

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-03-01

    The feasibility of hydroelectric power development on Lowell Creek near Seward has been investigated at.a reconnaissance level. The study was. conducted because .the physical characteristics of the creek and surrounding terrain initially appeared suitable for hydroelectric power. The creek has a steep gradient (about 400 feet per mile), is fed from a large snowfield, and has two significant drops. One drop is formed by the presence of a dam that was constructed to divert the creek through a mountain and around the town. The second drop of about 65 feet is at the termination of-the diversion tunnel. Three alternative sites for hydroelectric plants were considered, one each at the two drops and one farther upstream at the site of an old abandoned intake and valve house. Two of the sites were considered for 250-kW plants and one for a 100-kW plant. All were limited to a low head, less than 66 feet. Use of an existing dam and tunnel and an abandoned diversion dam and valve house was considered as part of the project alternatives. None of the three alternatives approaches feasibility at this time. Major influencing factors are the high cost of energy at over 13 cents per kWh, the winter freezeup resulting in plant shutdown from November to April, and a large amount of rock sediment carried by the stream and requiring expensive intake structures to skim off the rocks. The most promising alternative (alternative C), which would have a capacity of 250 kW and would produce about 800,000 kWh per year, would fill less than 5 percent of the city's present energy needs. The plant would cost nearly $1 million and produce energy at about 137 mills per kwh. This alternative is the best of the three from the standpoint of its.lower cost, best access via existing all-weather road, least exposure to avalanche and rockslides, and proximity to existing powerlines.

  10. Structural Design Feasibility Study for the Global Climate Experiment

    Energy Technology Data Exchange (ETDEWEB)

    Lewin,K.F.; Nagy, J.

    2008-12-01

    Neon, Inc. is proposing to establish a Global Change Experiment (GCE) Facility to increase our understanding of how ecological systems differ in their vulnerability to changes in climate and other relevant global change drivers, as well as provide the mechanistic basis for forecasting ecological change in the future. The experimental design was initially envisioned to consist of two complementary components; (A) a multi-factor experiment manipulating CO{sub 2}, temperature and water availability and (B) a water balance experiment. As the design analysis and cost estimates progressed, it became clear that (1) the technical difficulties of obtaining tight temperature control and maintaining elevated atmospheric carbon dioxide levels within an enclosure were greater than had been expected and (2) the envisioned study would not fit into the expected budget envelope if this was done in a partially or completely enclosed structure. After discussions between NEON management, the GCE science team, and Keith Lewin, NEON, Inc. requested Keith Lewin to expand the scope of this design study to include open-field exposure systems. In order to develop the GCE design to the point where it can be presented within a proposal for funding, a feasibility study of climate manipulation structures must be conducted to determine design approaches and rough cost estimates, and to identify advantages and disadvantages of these approaches including the associated experimental artifacts. NEON, Inc requested this design study in order to develop concepts for the climate manipulation structures to support the NEON Global Climate Experiment. This study summarizes the design concepts considered for constructing and operating the GCE Facility and their associated construction, maintenance and operations costs. Comparisons and comments about experimental artifacts, construction challenges and operational uncertainties are provided to assist in selecting the final facility design. The overall goal

  11. Moving with music for stroke rehabilitation: a sonification feasibility study.

    Science.gov (United States)

    Scholz, Daniel S; Rhode, Sönke; Großbach, Michael; Rollnik, Jens; Altenmüller, Eckart

    2015-03-01

    Gross-motor impairments are common after stroke, but efficacious and motivating therapies for these impairments are scarce. We present a novel musical sonification therapy especially designed to retrain gross-motor functions. Four stroke patients were included in a clinical pre-post feasibility study and were trained with our sonification training. Patients' upper-extremity functions and their psychological states were assessed before and after training. The four patients were subdivided into two groups, with both groups receiving 9 days of musical sonification therapy (music group, MG) or a sham sonification training (control group, CG). The only difference between these training protocols was that, in the CG, no sound was played back. During the training the patients initially explored the acoustic effects of their arm movements, and at the end of the training the patients played simple melodies by moving their arms. The two patients in the MG improved in nearly all motor function tests after the training. They also reported in the stroke impact scale, which assesses well-being, memory, thinking, and social participation, to be less impaired by the stroke. The two patients in the CG did benefit less from the movement training. Taken together, musical sonification may be a promising therapy for impairments after stroke.

  12. Flight Performance Feasibility Studies for the Max Launch Abort System

    Science.gov (United States)

    Tarabini, Paul V.; Gilbert, Michael G.; Beaty, James R.

    2013-01-01

    In 2007, the NASA Engineering and Safety Center (NESC) initiated the Max Launch Abort System Project to explore crew escape system concepts designed to be fully encapsulated within an aerodynamic fairing and smoothly integrated onto a launch vehicle. One objective of this design was to develop a more compact launch escape vehicle that eliminated the need for an escape tower, as was used in the Mercury and Apollo escape systems and what is planned for the Orion Multi-Purpose Crew Vehicle (MPCV). The benefits for the launch vehicle of eliminating a tower from the escape vehicle design include lower structural weights, reduced bending moments during atmospheric flight, and a decrease in induced aero-acoustic loads. This paper discusses the development of encapsulated, towerless launch escape vehicle concepts, especially as it pertains to the flight performance and systems analysis trade studies conducted to establish mission feasibility and assess system-level performance. Two different towerless escape vehicle designs are discussed in depth: one with allpropulsive control using liquid attitude control thrusters, and a second employing deployable aft swept grid fins to provide passive stability during coast. Simulation results are presented for a range of nominal and off-nominal escape conditions.

  13. Sitewide feasibility study Eielson Air Force Base, Alaska

    Energy Technology Data Exchange (ETDEWEB)

    Last, G.V.; Lanigan, D.C.; Josephson, G.B.; Bagaasen, L.M.

    1995-09-01

    The Sitewide Feasibility Study (FS) is required under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), the National Contingency Plan (NCP), and the Federal Facility Agreement (FFA) for Eielson Air Force Base (AFB). It is based on findings presented in the Sitewide Remedial Investigation (RI) Report (USAF 1995a), and the Sitewide Baseline Risk Assessment (BLRA) Report (USAF 1995b). Under the FFA, 64 potential source areas were placed in one of six operable units, based on similar contaminant and environmental characteristics, or were included for evaluation under a Source Evaluation Report (SER). The sitewide RI was directed at contamination that was not confined to an operable unit (OU) or SER source area. The objectives of the sitewide RI were to: Provide information about site characteristics to support individual OU RI/FS efforts and the sitewide RI/FS, including site hydrogeology and determination of background soil and groundwater characteristics; identify and characterize contamination that is not confined or attributable to a specific source area through sitewide monitoring of groundwater and surface water; evaluate cumulative risks to human health and the environment from contamination on a sitewide basis; and provide a mechanism for continued cohesive sitewide monitoring.

  14. The Mercury Project a feasibility study for Internet robots

    CERN Document Server

    Goldberg, K; Sutter, C; Wiegley, J

    2000-01-01

    Initiated at CERN in 1992, the World Wide Web provides a standard graphical interface to the Internet, and the number of users worldwide has grown exponentially in the last few years. In the Spring of 1994, we conjectured that it might be possible to offer public access to a teleoperated robot via the WWW. As a feasibility study in 1994, we built a system that allows a robot manipulator to be teleoperated via the Internet. Although the field of teleoperation dates back over 50 years, HTTP provides a low-cost and widely available interface that can make teleoperated resources accessible to a broad range of users. The Mercury Project consisted of an industrial robot arm fitted with a CCD camera and a pneumatic system. We placed a sandbox filled with buried artifacts in the robot workspace. Novice users remotely moved the camera to view desired locations and directed short bursts of compressed air into the sand to view the newly cleared regions. To our knowledge, the Mercury Project was the first Internet robot....

  15. Exercise for Adolescents with Depressive Disorders: A Feasibility Study

    Directory of Open Access Journals (Sweden)

    Richard R. Dopp

    2012-01-01

    Full Text Available Objectives. Adolescence is associated with increased depressive symptoms and decreased aerobic exercise, yet the relationship between exercise and clinical depression among adolescents requires further examination. This study assessed the feasibility of a 12-week intervention designed to increase exercise for adolescents with depressive disorders: Will a teenager with depression exercise? Methods. Participants were 13 adolescents with depression reporting low levels of aerobic exercise. They completed a 12-week intervention (15 supervised exercise sessions and 21 independent sessions. Exercise was measured through the aerobic exercise Questionnaire, actigraphy, and heart-rate monitoring. Depression was measured with the Children’s Depression Rating Scale, Revised, and Quick Inventory of Depressive Symptomatology, Self-Report. Results. All participants who started the intervention completed the protocol, attending all supervised exercise sessions. Actigraphy verified 81% adherence to the protocol’s independent sessions. Analysis of secondary outcomes showed a significant increase in exercise levels and a significant decrease in depression severity. Initially, ten participants were overweight or obese, and three were healthy weight. After 12 weeks of exercise, the number of participants in the healthy-weight category doubled. Conclusions. Adolescents suffering from depression can complete a rigorous protocol requiring structured increases in aerobic exercise. Participants showed significant increases in exercise, and significant decreases in depressive symptoms.

  16. Feasibility study of tank leakage mitigation using subsurface barriers

    Energy Technology Data Exchange (ETDEWEB)

    Treat, R.L.; Peters, B.B.; Cameron, R.J.; McCormak, W.D.; Trenkler, T.; Walters, M.F. [Ensearch Environmental, Inc. (United States); Rouse, J.K.; McLaughlin, T.J. [Bovay Northwest, Inc., Richland, WA (United States); Cruse, J.M. [Westinghouse Hanford Co., Richland, WA (United States)

    1994-09-21

    The US Department of Energy (DOE) has established the Tank Waste Remediation System (TWRS) to satisfy manage and dispose of the waste currently stored in the underground storage tanks. The retrieval element of TWRS includes a work scope to develop subsurface impermeable barriers beneath SSTs. The barriers could serve as a means to contain leakage that may result from waste retrieval operations and could also support site closure activities by facilitating cleanup. Three types of subsurface barrier systems have emerged for further consideration: (1) chemical grout, (2) freeze walls, and (3) desiccant, represented in this feasibility study as a circulating air barrier. This report contains analyses of the costs and relative risks associated with combinations retrieval technologies and barrier technologies that from 14 alternatives. Eight of the alternatives include the use of subsurface barriers; the remaining six nonbarrier alternative are included in order to compare the costs, relative risks and other values of retrieval with subsurface barriers. Each alternative includes various combinations of technologies that can impact the risks associated with future contamination of the groundwater beneath the Hanford Site to varying degrees. Other potential risks associated with these alternatives, such as those related to accidents and airborne contamination resulting from retrieval and barrier emplacement operations, are not quantitatively evaluated in this report.

  17. Fort Yukon, Chalkyitsik, & Venetie Biomass Boiler Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Greg Koontz, ME William A. Wall, PhD

    2009-03-31

    The Council of Athabascan Tribal Governments (CATG) is a consortium of ten Gwich'in and Koyukon Athabascan tribes settled in 10 remote villages and are linked by the Yukon River System. The CATG mission is to maintain the Yukon Flats region as Indian Country by asserting traditional rights and taking responsibility for developing tribal technical capacity to manage the land and resources. It is the intent of CATG to explore and develop all opportunities for a renewable and self-sufficient energy program for each of the villages. CATG envisions utilization of forest resources both for construction and energy as one of the best long-term strategies for integrating the economic goals for the region as well as supporting the cultural and social issues. The intent for this feasibility project is to focus specifically on biomass utilization for heat, first, and for future electrical generation within the region, second. An initial determination has already been made regarding the importance of wood energy as a primary source of renewable energy to displace diesel fuel in the Yukon Flats region. A desktop study of other potential renewable resources was conducted in 2006.

  18. Feasibility study of patient motion monitoring using tactile array sensor

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Tae Ho; Kang, Seong Hee; Kim, Dong Su; Cho, Min Seok; Kim, Kyeong Hyeon; Suh, Tae Suk [Dept. of Biomedical Engineering, Research Institute of Biomedical Engineering, the Catholic University of Korea, Seoul (Korea, Republic of); Kim, Si Yong [Dept. of Radiation Oncology, Virginia Commonwealth University, Richmond (United States)

    2014-11-15

    The aim of this study is to evaluate patient pretreatment set-up error and intra-fraction motion using the tactile array sensors (Pressure Profile Systems Inc, Los Angeles, CA) which could measure distributed pressure profiles along the contacting surface and to check a feasibility of the sensor (tactile array sensor) in the patient motion monitoring. Laser alignment and optical camera based monitoring system are very useful for reduce patient set-up error but these systems could not monitor the blind area like patient's back position. Actually after patient alignment using laser or optical monitoring system, it was assumed that there is no error in the patient's back position (pressure profile distribution). But if an error occurs in the patient's back position, it will affect the radiation therapy accuracy. In spite of optical motion monitoring or using the immobilization tool, distributed pressure profiles of patient's back position was changed during inter and intra-fraction. For more accurate patient set-up, blind area (patient's back) monitoring was necessary. We expect that the proposed method will be very useful for make up for the weakness of optical monitoring method.

  19. Majorana One-Tonne Cryostat Cooling Conceptual Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Reid, Douglas J.; Orrell, John L.; Fast, James E.; Aguayo Navarrete, Estanislao

    2011-02-17

    This report evaluates the conceptual plans for a one-tonne (S4) cryostat cooling design. This document is based upon previous design work and experimental results used to evaluate the current MAJORANA DEMONSTRATOR (MJD) thermal design. A feasibility study of a cooling system for S4 based on the MJD thermosyphon experiment is presented. The one-tonne experiment will be a scaled up version of the MJD. There will be many cryostats for the S4 experiment. In this document a cryostat with up to 19 strings of Germanium crystals is analyzed. Aside from an extra outer ring of crystals, the geometry of both systems’ cryostats is very similar. The materials used in the fabrication of both ultra-low background experiments will be underground electroformed copper. The current MJD uses a two-phase liquid-gas cooling system to ensure constant operating temperature. This document presents a theoretical investigation of a cooling system for the S4 experiment and evaluates the heat transfer performance requirements for such a system.

  20. Feasibility study of medical isotope production at Sandia National Laboratories

    Energy Technology Data Exchange (ETDEWEB)

    Massey, C.D.; Miller, D.L.; Carson, S.D. [Sandia National Labs., Albuquerque, NM (United States). Environmental Regulatory Assessment Dept.] [and others

    1995-12-01

    In late 1994, Sandia National Laboratories in Albuquerque, New Mexico, (SNL/NM), was instructed by the Department of Energy (DOE) Isotope Production and Distribution Program (IPDP) to examine the feasibility of producing medically useful radioisotopes using the Annular Core Research Reactor (ACRR) and the Hot Cell Facility (HCF). Los Alamos National Laboratory (LANL) would be expected to supply the targets to be irradiated in the ACRR. The intent of DOE would be to provide a capability to satisfy the North American health care system demand for {sup 99}Mo, the parent of {sup 99m}Tc, in the event of an interruption in the current Canadian supply. {sup 99m}Tc is used in 70 to 80% of all nuclear medicine procedures in the US. The goal of the SNL/NM study effort is to determine the physical plant capability, infrastructure, and staffing necessary to meet the North American need for {sup 99}Mo and to identify and examine all issues with potential for environmental impact.

  1. Quantitative analysis of multiple sclerosis: a feasibility study

    Science.gov (United States)

    Li, Lihong; Li, Xiang; Wei, Xinzhou; Sturm, Deborah; Lu, Hongbing; Liang, Zhengrong

    2006-03-01

    Multiple Sclerosis (MS) is an inflammatory and demyelinating disorder of the central nervous system with a presumed immune-mediated etiology. For treatment of MS, the measurements of white matter (WM), gray matter (GM), and cerebral spinal fluid (CSF) are often used in conjunction with clinical evaluation to provide a more objective measure of MS burden. In this paper, we apply a new unifying automatic mixture-based algorithm for segmentation of brain tissues to quantitatively analyze MS. The method takes into account the following effects that commonly appear in MR imaging: 1) The MR data is modeled as a stochastic process with an inherent inhomogeneity effect of smoothly varying intensity; 2) A new partial volume (PV) model is built in establishing the maximum a posterior (MAP) segmentation scheme; 3) Noise artifacts are minimized by a priori Markov random field (MRF) penalty indicating neighborhood correlation from tissue mixture. The volumes of brain tissues (WM, GM) and CSF are extracted from the mixture-based segmentation. Experimental results of feasibility studies on quantitative analysis of MS are presented.

  2. Feasibility study of tank leakage mitigation using subsurface barriers

    Energy Technology Data Exchange (ETDEWEB)

    Treat, R.L.; Peters, B.B.; Cameron, R.J.; McCormak, W.D.; Trenkler, T.; Walters, M.F. [Ensearch Environmental, Inc. (United States); Rouse, J.K.; McLaughlin, T.J. [Bovay Northwest, Inc., Richland, WA (United States); Cruse, J.M. [Westinghouse Hanford Co., Richland, WA (United States)

    1994-09-21

    The US Department of Energy (DOE) has established the Tank Waste Remediation System (TWRS) to satisfy manage and dispose of the waste currently stored in the underground storage tanks. The retrieval element of TWRS includes a work scope to develop subsurface impermeable barriers beneath SSTs. The barriers could serve as a means to contain leakage that may result from waste retrieval operations and could also support site closure activities by facilitating cleanup. Three types of subsurface barrier systems have emerged for further consideration: (1) chemical grout, (2) freeze walls, and (3) desiccant, represented in this feasibility study as a circulating air barrier. This report contains analyses of the costs and relative risks associated with combinations retrieval technologies and barrier technologies that from 14 alternatives. Eight of the alternatives include the use of subsurface barriers; the remaining six nonbarrier alternative are included in order to compare the costs, relative risks and other values of retrieval with subsurface barriers. Each alternative includes various combinations of technologies that can impact the risks associated with future contamination of the groundwater beneath the Hanford Site to varying degrees. Other potential risks associated with these alternatives, such as those related to accidents and airborne contamination resulting from retrieval and barrier emplacement operations, are not quantitatively evaluated in this report.

  3. Feasibility study of a soil-based rubberized CLSM.

    Science.gov (United States)

    Wu, Jason Y; Tsai, Mufan

    2009-02-01

    The development of beneficial uses of recycled scrap tires is always in great demand around the world. The disposal of on-site surplus excavated soil and the production of standard engineering aggregates have also been facing increasing environmental and ecological challenges in congested islands, such as Taiwan. This paper presents an experimental study using recycled crumb rubber and native silty sand to produce a lightweight, soil-based, rubberized controlled low strength material (CLSM) for a bridge approach repair. To assess the technical feasibility of this material, the effects of weight ratios of cement-to-water (C/W) and water-to-solid (W/S), and of rubber content on the engineering properties for different mixtures were investigated. The presented test results include flowability, unit weight, strength, settlement potential, and bearing capacity. Based on the findings, we conclude that a soil-based rubberized CLSM with 40% sand by weight and an optimal design ratio of 0.7 for C/W and 0.35 for W/S can be used for the proposed bridge approach repair. Such a mixture has demonstrated acceptable flowability, strength, and bearing capacity. Its lower unit weight, negligible compressibility, and hydrocollapse potential also help ensure that detrimental settlement is unlikely to occur. The results illustrate a novel scheme of CLSM production, and suggest a beneficial alternative for the reduction of scrap tires as well as conservation of resources and environment.

  4. Feasibility study of fast neutron energy spectrometer using magnetic field

    Energy Technology Data Exchange (ETDEWEB)

    Yamagishi, Hideshi; Ara, Katsuyuki [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1997-09-01

    A feasibility study of a fast neutron energy spectrometer (NES) using magnetic field was performed for development of a spectrometer having a measuring range of 3 decades and a covered energy range of 8 decades. The NES that is a kind of proton recoil spectrometer consists of a proton radiator, a magnet and a screen to detect protons. The pass of each charge particle flying into the magnetic field is deflected with a certain angle depending on the velocity of the particle, and it reaches the screen of charged particle detection after passing through the magnetic field. The energy of the particle is measured from the position on the screen at which the particle collide with. In this paper, optimization of the magnet geometry and the magnetic field intensity of the NES are discussed. The NES that is designed with the optimized geometry provides the measuring range of 3 decades with an energy measuring error of less than {+-}9%. A neutron energy range of 9 decades from 0.1 (eV) to 100 (MeV) is covered by adjusting the magnetic flux density. (author)

  5. Feasibility Study of 8-Bit Microcontroller Applications for Ethernet

    Directory of Open Access Journals (Sweden)

    Lech Gulbinovič

    2011-08-01

    Full Text Available Feasibility study of 8-bit microcontroller applications for Ethernet is presented. Designed device is based on ATmega32 microcontroller and 10 Mbps Ethernet controller ENC28J60. Device is simulated as mass queuing theoretical model with ticket booking counter. Practical explorations are accomplished and characteristics are determined. Practical results are compared to theoretical ones. Program code and device packet processing speed optimization are discussed. Microcontroller packet processing speed and packet latency depend on packet size. For ICMP protocol packet processing speed varies 1.4–2.1 Mbps, latency – 0.8–8.4 ms. UDP protocol packet processing speed varies 1.3–1.8 Mbps, latency – 1.1–9.6 ms. Packet processing speed depends on compilation settings and program code compression level. Best results are reached on optimization le­vel ‑O3, then speed increased ~3% but program code size increased 68% comparing to –Os optimization level.Article in Lithuanian

  6. Revised CTUIR Renewable Energy Feasibility Study Final Report

    Energy Technology Data Exchange (ETDEWEB)

    John Cox; Thomas Bailor; Theodore Repasky; Lisa Breckenridge

    2005-10-31

    This preliminary assessment of renewable energy resources on the Umatilla Indian Reservation (UIR) has been performed by CTUIR Department of Science and Engineering (DOSE). This analysis focused primarily identifying renewable resources that may be applied on or near the Umatilla Indian Reservation. In addition preliminary technical and economic feasibility of developing renewable energy resources have been prepared and initial land use planning issues identified. Renewable energies examined in the course of the investigation included solar thermal, solar photovoltaic, wind, bioethanol, bio-diesel and bio-pellet fuel. All renewable energy options studied were found to have some potential for the CTUIR. These renewable energy options are environmentally friendly, sustainable, and compliment many of the policy goals of the CTUIR. This report seeks to provide an overall review of renewable energy technologies and applications. It tries to identify existing projects near to the CTUIR and the efforts of the federal government, state government and the private sector in the renewable energy arena. It seeks to provide an understanding of the CTUIR as an energy entity. This report intends to provide general information to assist tribal leadership in making decisions related to energy, specifically renewable energy deve lopment.

  7. Crosswell electromagnetic imaging for geothermal reservoir characterization - a feasibility study

    Science.gov (United States)

    Samrock, Friedemann; Saar, Martin O.

    2016-04-01

    Most regions in the world do not have ready access to natural convective hydrothermal resources. To use deep geothermal heat as a viable energy resource in low-permeability formations, permeable fracture networks have to be created artificially to enable deep fluid circulation for advective heat transport to a production well. Such generation of enhanced geothermal systems (EGS) is studied in the "Deep Underground Geothermal (DUG)" laboratory at the Grimsel pass, Switzerland. Here, an underground experiment is conducted by hydraulically stimulating a pre-existing shear zone within crystalline rock. The objectives of this project are to better describe and understand the processes acting during reservoir generation. We perform a feasibility study to evaluate the capability of low-frequency crosswell electromagnetic (EM) tomography for mapping of stimulation-induced changes in electrical conductivity. First numerical results show that crosswell EM data are generally sensitive to the inter-well conductivity distribution, which is affected by properties such as interconnected porosity, permeability and the presence of fluids. It thereby provides important information for characterization of potential EGS reservoirs. We present a 3-D forward modeling and inversion study using synthetic data and under realistic conditions, these include the true borehole spacing and the observed electromagnetic noise level in the DUG laboratory. Based on these results we discuss the system requirements and the capability of crosswell EM to recover the inter-well structure and stimulation-induced changes. Besides the numerical study we report on the current status of instrumentation and realization of crosswell EM measurements at the DUG laboratory.

  8. Menstrual phase effects on smoking cessation: a pilot feasibility study.

    Science.gov (United States)

    Carpenter, Matthew J; Saladin, Michael E; Leinbach, Ashley S; Larowe, Steven D; Upadhyaya, Himanshu P

    2008-03-01

    A growing body of research suggests that nicotine withdrawal and cigarette craving may vary across the menstrual cycle and that the luteal phase of the cycle may be associated with increases in each. This potential relationship suggests that careful timing of quit attempts during the menstrual cycle may improve initial success at abstinence, although there are no direct tests of this approach yet published. Our objectives were to preliminarily test the effect of timing of quit attempts for smoking cessation relative to menstrual cycle and to identify methodological procedures that could guide subsequent, larger clinical trials. In this pilot study, we randomized female smokers aged 18-40 who were not currently using hormonal contraception to quit smoking during either the follicular (n = 25) or luteal phase (n = 19) of their menstrual cycle. Participants were provided with two sessions of smoking cessation counseling (90 minutes total). All participants were provided with a transdermal nicotine patch contingent on maintenance of abstinence throughout the course of the 6-week study. Among participants who initiated treatment, received the patch, and made a quit attempt (n = 35), carbon monoxide-verified repeated point prevalence abstinence 2 weeks after the target quit date was higher in the follicular than the luteal group (32% vs. 19%, respectively; OR = 2.0, 95% CI = 0.4-9.8). Within the overall study population, this difference was slightly lower (24% vs. 16%; OR = 1.7, 95% CI = 0.4-7.8). Timing quit attempts based on menstrual phase is feasible. Insights gained from this study and the recommendations made herein may inform future research on this important clinical question.

  9. Feasibility study of heavy ion physics program at NICA

    Science.gov (United States)

    Batyuk, P. N.; Kekelidze, V. D.; Kolesnikov, V. I.; Rogachevsky, O. V.; Sorin, A. S.; Voronyuk, V. V.

    2016-07-01

    There are strong experimental and theoretical evidences that in collisions of heavy ions at relativistic energies nuclear matter undergoes a phase transition to the deconfined state—Quark Gluon Plasma. The caused energy region of such transition was not found at high energy at SPS and RHIC and search for this energy is shifted to lower energies, which will be covered by the future NICA (Dubna), FAIR (Darmstadt) facilities and BES II at RHIC. Fixed target and collider experiments at the NICA facility will work at the energy range from a few AGeV up to √ {{S_{NN}}} = 11GeV GeV and will study the most interesting area on the nuclear matter phase diagram. The most remarkable results were observed in the study of collective phenomena occurring in the early stage of nuclear collisions. Investigation of the collective flow will provide information on Equation of State (EoS) for nuclear matter. Study of the Event-by-Event fluctuations and correlations can give us signals of critical behavior of the system. Femtoscopy analysis provides the space-time history of the collisions. Also, it was found that baryon stopping power revealing itself as a "wiggle" in excitation function of curvature of the (net)proton rapidity spectrum relates to the order of the phase transition. The available observations of an enhancement of dilepton rates at low invariant masses may serve as a signal of the chiral symmetry restoration in hot and dense matter. Due to this fact, measurements of the dilepton spectra are considered to be an important part of the NICA physics program. The study of strange particles and hypernuclei production gives additional information on the EoS and "strange" axis of the QCD phase diagram. In this paper a feasibility of the considered investigations is shown by the detailed Monte Carlo simulations applied to the planned experiments (BM@N, MPD) at NICA.

  10. Feasibility study on the development of advanced LWR fuel technology

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Youn Ho; Sohn, D. S.; Jeong, Y. H.; Song, K. W.; Song, K. N.; Chun, T. H.; Bang, J. G.; Bae, K. K.; Kim, D. H. and others

    1997-07-01

    Worldwide R and D trends related to core technology of LWR fuels and status of patents have been surveyed for the feasibility study. In addition, various fuel cycle schemes have been studied to establish the target performance parameters. For the development of cladding material, establishment of long-term research plan for alloy development and optimization of melting process and manufacturing technology were conducted. A work which could characterize the effect of sintering additives on the microstructure of UO{sub 2} pellet has been experimentally undertaken, and major sintering variables and their ranges have been found in the sintering process of UO{sub 2}-Gd{sub 2}O{sub 3} burnable absorber pellet. The analysis of state of the art technology related to flow mixing device for spacer grid and debris filtering device for bottom nozzle and the investigation of the physical phenomena related to CHF enhancement and the establishment of the data base for thermal-hydraulic performance tests has been done in this study. In addition, survey on the documents of the up-to-date PWR fuel assemblies developed by foreign vendors have been carried out to understand their R and D trends and establish the direction of R and D for these structural components. And, to set the performance target of the new fuel, to be developed, fuel burnup and economy under the extended fuel cycle length scheme were estimated. A preliminary study on the failure mechanism of CANDU fuel, key technology and advanced coating has been performed. (author). 190 refs., 31 tabs., 129 figs.

  11. Stroke experiences in weblogs: a feasibility study of sex differences.

    Science.gov (United States)

    Koh, Sukjin; Gordon, Andrew S; Wienberg, Christopher; Sood, Sara O; Morley, Stephanie; Burke, Deborah M

    2014-03-19

    Research on cerebral stroke symptoms using hospital records has reported that women experience more nontraditional symptoms of stroke (eg, mental status change, pain) than men do. This is an important issue because nontraditional symptoms may delay the decision to get medical assistance and increase the difficulty of correct diagnosis. In the present study, we investigate sex differences in the stroke experience as described in stories on weblogs. The goal of this study was to investigate the feasibility of using the Internet as a source of data for basic research on stroke experiences. Stroke experiences described in blogs were identified by using StoryUpgrade, a program that searches blog posts using a fictional prototype story. In this study, the prototype story was a description of a stroke experience. Retrieved stories coded by the researchers as relevant were used to update the search query and retrieve more stories using relevance feedback. Stories were coded for first- or third-person narrator, traditional and nontraditional patient symptoms, type of stroke, patient sex and age, delay before seeking medical assistance, and delay at hospital and in treatment. There were 191 relevant stroke stories of which 174 stories reported symptoms (52.3% female and 47.7% male patients). There were no sex differences for each traditional or nontraditional stroke symptom by chi-square analysis (all Ps>.05). Type of narrator, however, affected report of traditional and nontraditional symptoms. Female first-person narrators (ie, the patient) were more likely to report mental status change (56.3%, 27/48) than male first-person narrators (36.4%, 16/44), a marginally significant effect by logistic regression (P=.056), whereas reports of third-person narrators did not differ for women (27.9%, 12/43) and men (28.2%, 11/39) patients. There were more reports of at least 1 nontraditional symptom in the 92 first-person reports (44.6%, 41/92) than in the 82 third-person reports (25

  12. Stroke Experiences in Weblogs: A Feasibility Study of Sex Differences

    Science.gov (United States)

    Koh, Sukjin; Gordon, Andrew S; Wienberg, Christopher; Sood, Sara O; Morley, Stephanie

    2014-01-01

    Background Research on cerebral stroke symptoms using hospital records has reported that women experience more nontraditional symptoms of stroke (eg, mental status change, pain) than men do. This is an important issue because nontraditional symptoms may delay the decision to get medical assistance and increase the difficulty of correct diagnosis. In the present study, we investigate sex differences in the stroke experience as described in stories on weblogs. Objective The goal of this study was to investigate the feasibility of using the Internet as a source of data for basic research on stroke experiences. Methods Stroke experiences described in blogs were identified by using StoryUpgrade, a program that searches blog posts using a fictional prototype story. In this study, the prototype story was a description of a stroke experience. Retrieved stories coded by the researchers as relevant were used to update the search query and retrieve more stories using relevance feedback. Stories were coded for first- or third-person narrator, traditional and nontraditional patient symptoms, type of stroke, patient sex and age, delay before seeking medical assistance, and delay at hospital and in treatment. Results There were 191 relevant stroke stories of which 174 stories reported symptoms (52.3% female and 47.7% male patients). There were no sex differences for each traditional or nontraditional stroke symptom by chi-square analysis (all Ps>.05). Type of narrator, however, affected report of traditional and nontraditional symptoms. Female first-person narrators (ie, the patient) were more likely to report mental status change (56.3%, 27/48) than male first-person narrators (36.4%, 16/44), a marginally significant effect by logistic regression (P=.056), whereas reports of third-person narrators did not differ for women (27.9%, 12/43) and men (28.2%, 11/39) patients. There were more reports of at least 1 nontraditional symptom in the 92 first-person reports (44.6%, 41/92) than

  13. Feasibility of the Dutch ICF Activity Inventory: a pilot study

    Directory of Open Access Journals (Sweden)

    van Nispen Ruth MA

    2010-11-01

    Full Text Available Abstract Background Demographic ageing will lead to increasing pressure on visual rehabilitation services, which need to be efficiently organised in the near future. The Dutch ICF Activity Inventory (D-AI was developed to assess the rehabilitation needs of visually impaired persons. This pilot study tests the feasibility of the D-AI using a computer-assisted telephone interview. Methods In addition to the regular intake, the first version of the D-AI was assessed in 20 patients. Subsequently, patients and intake assessors were asked to fill in an evaluation form. Based on these evaluations, a new version of the D-AI was developed. Results Mean administration time of the D-AI was 88.8 (± 41.0 minutes. Overall, patients and assessors were positive about the D-AI assessment. However, professionals and 60% of the patients found the administration time to be too long. All included items were considered relevant and only minor adjustments were recommended. Conclusion The systematic character of the revised D-AI will prevent topics from being overlooked and indicate which needs have the highest priority from a patient-centred perspective. Moreover, ongoing assessment of the D-AI will enhance evaluation of the rehabilitation process. To decrease administration time, in the revised D-AI only the top priority goals will be fully assessed. Using the D-AI, a rehabilitation plan based on individual needs can be developed for each patient. Moreover, it enables better evaluation of the effects of rehabilitation. A larger validation study is planned.

  14. Feasibility study of fluxless brazing cemented carbides to steel

    Science.gov (United States)

    Tillmann, W.; Sievers, N.

    2017-03-01

    One of the most important brazing processes is the joints between cemented carbides and steel for the tool industry such as in rotary drill hammers or saw blades. Even though this technique has already been used for several decades, defects in the joint can still occur and lead to quality loss. Mostly, the joining process is facilitated by induction heating and the use of a flux to enhance the wetting of the filler alloy on the surface of the steel and cemented carbide in an ambient atmosphere. However, although the use of flux enables successful joining, it also generates voids within the joint, which reduces the strength of the connection while the chemicals within the flux are toxic and polluting. In this feasibility study, a fluxless brazing process is used to examine the joint between cemented carbides and steel for the first time. For this, ultrasound is applied during induction heating to enable the wetting between the liquid filler metal and the surfaces of the cemented carbide and steel. The ultrasound generates cavitations within the liquid filler metal, which remove the oxides from the surface. Several filler metals such as a silver based alloy Ag449, pure Zn, and an AlSi-alloy were used to reduce the brazing temperature and to lower the thermal residual stresses within the joint. As a result, every filler metal successfully wetted both materials and led to a dense connection. The ultrasound has to be applied carefully to prevent a damage of the cemented carbide. In this regard, it was observed that single grains of the cemented carbide broke out and remained in the joint. This positive result of brazing cemented carbides to steel without a flux but using ultrasound, allows future studies to focus on the shear strength of these joints as well as the behavior of the thermally induced residual stresses.

  15. Extended TRAM flap: feasibility study on fresh human cadavers.

    Science.gov (United States)

    Zenn, Michael R; Heitmann, Christoph

    2003-03-01

    The purpose of this study was to investigate the feasibility of a superiorly based TRAM flap for breast reconstruction with its superior border abutting the inframammary fold. This flap would have a primary blood supply from the superior epigastric vessels, similar to a free flap attached to the mammary system. This flap, however, would not require microsurgery. Instead, it would have its superior epigastric pedicle lengthened by partial rib resection. Donor site closure would be accomplished by reverse abdominoplasty and the donor scar hidden in the inframammary fold. The surgical anatomy of such an extended TRAM flap (eTRAM) was investigated by cannulation of the internal mammary artery (IMA) in 10 fresh human cadavers bilaterally, injection with latex, and then dissection throughout its intrathoracic course. At the level of the third intercostal space, the mean external diameters of the right and left IMA were found to be 2.5 mm and 2.3 mm, respectively. The diameter of the vessel decreased until the IMA bifurcated into the superior epigastric artery and the musculophrenic artery, usually at the sixth intercostal space. The superior epigastric artery, having a mean diameter of 1.6 mm at its origin, descended caudally behind the seventh costal cartilage and could be followed until it entered the posterior rectus sheath and the rectus abdominis muscle. On its downward course, it was not embedded in the diaphragm muscle and was easily separated without violation of the thoracic cavity. From this anatomic study, it seems to be possible to raise an eTRAM after partial rib resection. Some technical considerations of such a flap are discussed. This modification of the TRAM would be helpful to surgeons commonly performing pedicled TRAM flaps and might extend its applicability beyond breast reconstruction to chest wall, intrathoracic, and head and neck reconstruction.

  16. Cherenkov luminescence measurements with digital silicon photomultipliers: a feasibility study.

    Science.gov (United States)

    Ciarrocchi, Esther; Belcari, Nicola; Guerra, Alberto Del; Cherry, Simon R; Lehnert, Adrienne; Hunter, William C J; McDougald, Wendy; Miyaoka, Robert S; Kinahan, Paul E

    2015-12-01

    A feasibility study was done to assess the capability of digital silicon photomultipliers to measure the Cherenkov luminescence emitted by a β source. Cherenkov luminescence imaging (CLI) is possible with a charge coupled device (CCD) based technology, but a stand-alone technique for quantitative activity measurements based on Cherenkov luminescence has not yet been developed. Silicon photomultipliers (SiPMs) are photon counting devices with a fast impulse response and can potentially be used to quantify β-emitting radiotracer distributions by CLI. In this study, a Philips digital photon counting (PDPC) silicon photomultiplier detector was evaluated for measuring Cherenkov luminescence. The PDPC detector is a matrix of avalanche photodiodes, which were read one at a time in a dark count map (DCM) measurement mode (much like a CCD). This reduces the device active area but allows the information from a single avalanche photodiode to be preserved, which is not possible with analog SiPMs. An algorithm to reject the noisiest photodiodes and to correct the measured count rate for the dark current was developed. The results show that, in DCM mode and at (10-13) °C, the PDPC has a dynamic response to different levels of Cherenkov luminescence emitted by a β source and transmitted through an opaque medium. This suggests the potential for this approach to provide quantitative activity measurements. Interestingly, the potential use of the PDPC in DCM mode for direct imaging of Cherenkov luminescence, as a opposed to a scalar measurement device, was also apparent. We showed that a PDPC tile in DCM mode is able to detect and image a β source through its Cherenkov radiation emission. The detector's dynamic response to different levels of radiation suggests its potential quantitative capabilities, and the DCM mode allows imaging with a better spatial resolution than the conventional event-triggered mode. Finally, the same acquisition procedure and data processing could be

  17. Pueblo of Jemez Geothermal Feasibility Study Fianl Report

    Energy Technology Data Exchange (ETDEWEB)

    S.A. Kelley; N. Rogers; S. Sandberg; J. Witcher; J. Whittier

    2005-03-31

    This project assessed the feasibility of developing geothermal energy on the Pueblo of Jemez, with particular attention to the Red Rocks area. Geologic mapping of the Red Rocks area was done at a scale of 1:6000 and geophysical surveys identified a potential drilling target at a depth of 420 feet. The most feasible business identified to use geothermal energy on the reservation was a greenhouse growing culinary and medicinal herbs. Space heating and a spa were identified as two other likely uses of geothermal energy at Jemez Pueblo. Further geophysical surveys are needed to identify the depth to the Madera Limestone, the most likely host for a major geothermal reservoir.

  18. Comprehensive Renewable Energy Feasibility Study for Sealaska Corporation

    Energy Technology Data Exchange (ETDEWEB)

    Robert Lynette; John Wade: Larry Coupe

    2006-06-30

    The purposes of this project were: (1) to conduct a comprehensive feasibility study to determine the potential sustainability of wind and/or small hydroelectric power plants on Southeast Alaska native village lands, and (2) to provide the villages with an understanding of the requirements, costs, and benefits of developing and operating wind or small hydroelectric power plants. The program was sponsored by the Tribal Energy program, Office of Energy Efficiency and Renewable Energy, US Department of Energy. The Contractor was Sealaska Corporation, the Regional Native Corporation for Southeast Alaska that includes 12 village/urban corporations. Most villages are isolated from any central electric transmission and use diesel-electric systems for power generation, making them prime candidates for deploying renewable energy sources. Wind Energy - A database was assembled for all of the candidate sites in SE Alaska, including location, demographics, electricity supply and demand, existing and planned transmission interties with central generation, topographical maps, macro wind data, and contact personnel. Field trips were conducted at the five candidate villages that were deemed most likely to have viable wind resources. Meetings were held with local village and utility leaders and the requirements, costs, and benefits of having local renewable energy facilities were discussed. Two sites were selected for anemometry based on their needs and the probability of having viable wind resources – Yakutat and Hoonah. Anemometry was installed at both sites and at least one year of wind resource data was collected from the sites. This data was compared to long-term data from the closest weather stations. Reports were prepared by meteorologist John Wade that contains the details of the measured wind resources and energy production projections. Preliminary financial analysis of hypothetical wind power stations were prepared to gauge the economic viability of installing such

  19. Feasibility Study for Renewable Energy Development on Tribal Lands

    Energy Technology Data Exchange (ETDEWEB)

    John Hendrix, Project Director; Charles Weir, Project Manager; Dr. John Plodinec, Technology Advisor; Dr. Steve Murray, Economic Advisor

    2005-07-21

    Project Objective: The Mississippi Band of Choctaw Indians (MBCI) conducted a study of the feasibility of siting a renewable energy biomass-based installation on tribal lands. The purpose of the study was to determine whether such an installation can be economically sustainable, as well as consistent with the cultural, social, and economic goals of the Tribe. Scope: To achieve the goal of the feasibility study, the following tasks were carried out: (1) Resource availability assessment--The objective of this assessment was to determine the availability of both poultry litter and wood residues for use in the proposed facility. (2) Power utilization assessment--The objective of this assessment was to determine the potential market size for power produced, the existing infrastructure for delivering power to that market, and the costs and economic returns for doing so. (3) Technology review--The objective of this review was to identify one, or more, technical options for detailed economic and technical assessment. The study considered a range of feedstock and product mixtures of poultry litter; wood residues as feedstock; and electrical power and other ancillary products as outputs. Distributed power sources was also examined. Technologies ranging from gasification to systems that produce both power and value-added chemicals were considered. Technologies selected for detailed review were those that can be sized to process the amount of available feed (poultry litter, or poultry litter and wood residues), and that also appear to make economic sense in terms of the value of their inputs. The technology review leaned heavily on the experience from similar prior DOE projects, particularly those conducted by the National Renewable Energy Laboratory (NREL). NREL was involved in a consultative role, so that the project team could leverage their experience. (4) Systems Design(s)--Based on the technology review, a pre-conceptual design for an installation was developed. This

  20. Time Reversal Signal Processing in Communications - A Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, A W; Candy, J V; Poggio, A J

    2002-01-30

    A typical communications channel is subjected to a variety of signal distortions, including multipath, that corrupt the information being transmitted and reduce the effective channel capacity. The mitigation of the multipath interference component is an ongoing concern for communication systems operating in complex environments such as might be experienced inside buildings, urban environments, and hilly or heavily wooded areas. Communications between mobile units and distributed sensors, so important to national security, are dependent upon flawless conveyance of information in complex environments. The reduction of this multipath corruption necessitates better channel equalization, i.e., the removal of channel distortion to extract the transmitted information. But, the current state of the art in channel equalization either requires a priori knowledge of the channel or the use of a known training sequence and adaptive filtering. If the ''assumed'' model within the equalization processor does not at least capture the dominant characteristics of the channel, then the received information may still be highly distorted and possibly useless. Also, the processing required for classical equalization is demanding in computational resources. To remedy this situation, many techniques have been investigated to replace classical equalization. Such a technique, the subject of this feasibility study, is Time Reversal Signal Processing (TRSP). Multipath is particularly insidious and a major factor in the deterioration of communication channels. Unlike most other characteristics that corrupt a communications channel, the detrimental effects of multipath cannot be overcome by merely increasing the transmitted power. Although the power in a signal diminishes as a function of the distance between the transmitter and receiver, multipath further degrades a signal by creating destructive interference that results in a loss of received power in a very localized area

  1. A feasibility study on precipitation regime classification by meteorological states

    Science.gov (United States)

    Hamada, A.; Takayabu, Y. N.

    2012-04-01

    Appropriate microphysical models of rainfall systems are essential for accurate precipitation retrievals from satellite measurements. For a better estimate of rainfall from the microwave imager satellites in Global Satellite Mapping of Precipitation (GSMaP), Takayabu (2008, GEWEX Newsletter; hereinafter T08) produced 3-monthly maps of dominant rainfall systems, utilizing TRMM Precipitation Radar (PR) and Lightning Imaging Sensor (LIS) data. It is worthwhile if we can classify different type of rainfall systems not from satellite rainfall data themselves but from the environmental meteorological states. In this feasibility study, precipitation regime classification over the oceans is performed by constructing a look-up-table (LUT) for estimating precipitation types in terms of local state of the atmosphere and ocean. This time, we chose four variables to construct the LUTs; sea surface temperature (SST), pressure vertical velocity at 500hPa (ω500), lower-tropospheric baroclinicity at 900hPa (dT900/dy), and lower-tropospheric stability (LTS), obtained from ERA-interim and OISST. The LUTs are trained with the precipitation types defined by T08. The four-dimensional probability density functions for each precipitation types were utilized to reconstruct precipitation types at each point. The constructed four-dimensional LUT is shown to have a reasonably good skill in estimation over the oceans. The possibility of detection (POD) is above 60% up to 90% for all seasons. The estimation skill is less dependent on months despite that the LUT was trained with only one month climatology, indicating the choice of these state variables is reasonable. The LUT can also describe interannual variations of precipitation regimes, e.g., those differences in El Niño and La Niña periods. The way of separation by selected environmental states is mostly meteorologically reasonable, although some representative variables have some room for improvements especially in the midlatitudes. We

  2. Feasibility study report for the 200-BP-1 operable unit

    Energy Technology Data Exchange (ETDEWEB)

    1993-06-01

    This feasibility study examines a range of alternatives and provides recommendations for selecting a preferred alternative for remediating contamination at the 200-BP-1 operable unit. The 200-BP-1 operable unit is located in the center of the Hanford Site along the northern boundary of the 200 East Area. The 241-BY Tank Farm is located immediately to the south of the operable unit. 200-BP-1 is a source operable unit with contaminated soils associated primarily with nine inactive cribs (known as the 216-B cribs). These cribs were used for disposal of low-level radioactive liquid waste from U Plant uranium recovery operations, and waste storage tank condensate from the adjacent 241-BY Tank Farm. The cribs used for disposal of U Plant waste were in operation from 1955--1965, and the cribs used for disposal of tank condensate were in operation from 1965--1975. In addition to the cribs, four unplanned releases of radioactive materials have occurred within the operable unit. Contaminated surface soils associated with the unplanned releases have been consolidated over the cribs and covered with clean soil to reduce contaminant migration and exposure. Discharge of wastes to the cribs has resulted in soil and groundwater contamination. The groundwater is being addressed as part of the 200 East Aggregate Area, groundwater operable unit. Contaminated soils at the site can be categorized by the types of contaminants, their distribution in the soil column, and the risk posed by the various potential exposure pathways. Below the clean soil cover, the near surface soils contain low-levels of contamination with cesium-137, radium-226, strontium-90, thorium-228, and uranium. The lifetime incremental cancer risk associated with these soils if they were exposed at the surface is 9{times}10{sup {minus}5}.

  3. Coaching at the Building Site – A Feasibility Study

    DEFF Research Database (Denmark)

    Koch, Christian; Alsdorf, Morten; Sander, Dag

    2006-01-01

    Coaching has become widely used in business, and is well described. However it is rarely used in construction. This makes a contrast to the poor performance of site interaction, leading to a vast amount of reported cooperation and coordination problems. This paper investigates the feasibility...

  4. Feasibility study of 5MW superconducting wind turbine generator

    DEFF Research Database (Denmark)

    Abrahamsen, Asger Bech; Jensen, Bogi Bech; Seiler, E.

    2011-01-01

    The feasibility of installing a direct drive superconducting generator in the 5MW reference offshore wind turbine of the National Renewable Energy Laboratory (NREL) has been examined. The engineering current densities Je obtained in a series of race track coils have been combined with magnetization...

  5. Final Report - Wind and Hydro Energy Feasibility Study - June 2011

    Energy Technology Data Exchange (ETDEWEB)

    Jim Zoellick; Richard Engel; Rubin Garcia; Colin Sheppard

    2011-06-17

    This feasibility examined two of the Yurok Tribe's most promising renewable energy resources, wind and hydro, to provide the Tribe detailed, site specific information that will result in a comprehensive business plan sufficient to implement a favorable renewable energy project.

  6. Managing a surgical unit using google drive - a feasibility study

    Directory of Open Access Journals (Sweden)

    Ashley Solomon C.

    2016-10-01

    Conclusions: It is feasible to use google drive as a patient management system by a surgical unit to organise work. This system is efficient, secure and cost effective. [Int J Res Med Sci 2016; 4(10.000: 4365-4369

  7. 7 CFR 1737.70 - Description of feasibility study

    Science.gov (United States)

    2010-01-01

    ..., the data may be obtained from the borrower's financial statements and other reports, and from other... from RUS and all other lenders as of the end of the feasibility Forecast period (i.e. for a 5-year Forecast period, the amount of debt outstanding in year 5). (g) The financial and statistical data...

  8. Internal calibration of gel dosimeters: A feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Trapp, J V; Kairn, T; Crowe, S; Fielding, A [School of Physical and Chemical Sciences Queensland University of Technology GPO Box 2434, Brisbane 4001 (Australia)], E-mail: j.trapp@qut.edu.au

    2009-05-01

    In this work we test the feasibility of a new calibration method for gel dosimetry. We examine, through Monte Carlo modelling, whether the inclusion of an organic plastic scintillator system at key points within the gel phantom would perturb the dose map. Such a system would remove the requirement for a separate calibration gel, removing many sources of uncertainty.

  9. Livingston Parish Landfill Methane Recovery Project (Feasibility Study)

    Energy Technology Data Exchange (ETDEWEB)

    White, Steven

    2012-11-15

    The Woodside Landfill is owned by Livingston Parish, Louisiana and is operated under contract by Waste Management of Louisiana LLC. This public owner/private operator partnership is commonplace in the solid waste industry today. The landfill has been in operation since approximately 1988 and has a permitted capacity of approximately 41 million cubic yards. Based on an assumed in-place waste density of 0.94 ton per cubic yard, the landfill could have an expected design capacity of 39.3 million tons. The landfill does have an active landfill gas collection and control system (LFGCCS) in place because it meets the minimum thresholds for the New Source Performance Standards (NSPS). The initial LFGCS was installed prior to 2006 and subsequent phases were installed in 2007 and 2010. The Parish received a grant from the United States Department of Energy in 2009 to evaluate the potential for landfill gas recovery and utilization at the Woodside Landfill. This includes a technical and economic feasibility study of a project to install a landfill gas to energy (LFGTE) plant and to compare alternative technologies. The LFGTE plant can take the form of on-site electrical generation, a direct use/medium Btu option, or a high-Btu upgrade technology. The technical evaluation in Section 2 of this report concludes that landfill gas from the Woodside landfill is suitable for recovery and utilization. The financial evaluations in sections 3, 4, and 5 of this report provide financial estimates of the returns for various utilization technologies. The report concludes that the most economically viable project is the Electricity Generation option, subject to the Parish’s ability and willingness to allocate adequate cash for initial capital and/or to obtain debt financing. However, even this option does not present a solid return: by our estimates, there is a 19 year simple payback on the electricity generation option. All of the energy recovery options discussed in this report

  10. Cherenkov luminescence measurements with digital silicon photomultipliers: a feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Ciarrocchi, Esther; Belcari, Nicola; Guerra, Alberto Del [Department of Physics, University of Pisa, Pisa (Italy); INFN, section of Pisa, Pisa (Italy); Cherry, Simon R. [Department of Biomedical Engineering, University of California, Davis, CA (United States); Lehnert, Adrienne; Hunter, William C. J.; McDougald, Wendy; Miyaoka, Robert S.; Kinahan, Paul E. [Department of Radiology, University of Washington, Seattle, WA (United States)

    2015-11-16

    A feasibility study was done to assess the capability of digital silicon photomultipliers to measure the Cherenkov luminescence emitted by a β source. Cherenkov luminescence imaging (CLI) is possible with a charge coupled device (CCD) based technology, but a stand-alone technique for quantitative activity measurements based on Cherenkov luminescence has not yet been developed. Silicon photomultipliers (SiPMs) are photon counting devices with a fast impulse response and can potentially be used to quantify β-emitting radiotracer distributions by CLI. In this study, a Philips digital photon counting (PDPC) silicon photomultiplier detector was evaluated for measuring Cherenkov luminescence. The PDPC detector is a matrix of avalanche photodiodes, which were read one at a time in a dark count map (DCM) measurement mode (much like a CCD). This reduces the device active area but allows the information from a single avalanche photodiode to be preserved, which is not possible with analog SiPMs. An algorithm to reject the noisiest photodiodes and to correct the measured count rate for the dark current was developed. The results show that, in DCM mode and at (10–13) °C, the PDPC has a dynamic response to different levels of Cherenkov luminescence emitted by a β source and transmitted through an opaque medium. This suggests the potential for this approach to provide quantitative activity measurements. Interestingly, the potential use of the PDPC in DCM mode for direct imaging of Cherenkov luminescence, as a opposed to a scalar measurement device, was also apparent. We showed that a PDPC tile in DCM mode is able to detect and image a β source through its Cherenkov radiation emission. The detector’s dynamic response to different levels of radiation suggests its potential quantitative capabilities, and the DCM mode allows imaging with a better spatial resolution than the conventional event-triggered mode. Finally, the same acquisition procedure and data processing could

  11. Noncontact surface thermometry for microsystems: LDRD final report.

    Energy Technology Data Exchange (ETDEWEB)

    Abel, Mark (Georgia Institute of Technology, Atlanta, GA); Beecham, Thomas (Georgia Institute of Technology, Atlanta, GA); Graham, Samuel (Georgia Institute of Technology, Atlanta, GA); Kearney, Sean Patrick; Serrano, Justin Raymond; Phinney, Leslie Mary

    2006-10-01

    We describe a Laboratory Directed Research and Development (LDRD) effort to develop and apply laser-based thermometry diagnostics for obtaining spatially resolved temperature maps on working microelectromechanical systems (MEMS). The goal of the effort was to cultivate diagnostic approaches that could adequately resolve the extremely fine MEMS device features, required no modifications to MEMS device design, and which did not perturb the delicate operation of these extremely small devices. Two optical diagnostics were used in this study: microscale Raman spectroscopy and microscale thermoreflectance. Both methods use a low-energy, nonperturbing probe laser beam, whose arbitrary wavelength can be selected for a diffraction-limited focus that meets the need for micron-scale spatial resolution. Raman is exploited most frequently, as this technique provides a simple and unambiguous measure of the absolute device temperature for most any MEMS semiconductor or insulator material under steady state operation. Temperatures are obtained from the spectral position and width of readily isolated peaks in the measured Raman spectra with a maximum uncertainty near {+-}10 K and a spatial resolution of about 1 micron. Application of the Raman technique is demonstrated for V-shaped and flexure-style polycrystalline silicon electrothermal actuators, and for a GaN high-electron-mobility transistor. The potential of the Raman technique for simultaneous measurement of temperature and in-plane stress in silicon MEMS is also demonstrated and future Raman-variant diagnostics for ultra spatio-temporal resolution probing are discussed. Microscale thermoreflectance has been developed as a complement for the primary Raman diagnostic. Thermoreflectance exploits the small-but-measurable temperature dependence of surface optical reflectivity for diagnostic purposes. The temperature-dependent reflectance behavior of bulk silicon, SUMMiT-V polycrystalline silicon films and metal surfaces is

  12. NGST Yardstick Integrated Science Instrument Module (ISIM) Feasibility Study

    Science.gov (United States)

    Greenhouse, M. A.; Dipirro, M.; Federline, B.; Gardner, Jonathan P.; Guy, P.; Hagopian, J.; Hein, J.; Jurotich, M.; Lawrence, J.; Martineau, B.; Mather, J. C.; Mentzell, E.; Satyapal, S.; Stanley, D.; Teplitz, H. I.; Travis, J.; Bely, P.; Petro, L. D.; Stockman, P.; Burg, R.; Bitzel, R.

    1998-12-01

    We display portions of the baseline design concept for the NGST Integrated Science Instrument Module (ISIM). This ISIM design is under ongoing development for integration with the "Yardstick" and other NGST 8 m architectures that are intended for packaging in an EELV or Ariane 5 meter class fairing. The goals of this activity are to: [1] demonstrate mission science feasibility, [2] identify ISIM technology challenge areas, [3] assess ISIM engineering and cost feasibility, [5] identify ISIM/NGST interface constraints, and [6] enable smart customer procurement of the ISIM. In this poster, we display a snap shot of work in progress including: optical design, opto-mechanical layout, thermal modeling, focal plane array design, and electronics design. Ongoing progress can be monitored via ISIM team web site: http://ngst.gsfc.nasa.gov/

  13. Long-range eye tracking: A feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Jayaweera, S.K.; Lu, Shin-yee

    1994-08-24

    The design considerations for a long-range Purkinje effects based video tracking system using current technology is presented. Past work, current experiments, and future directions are thoroughly discussed, with an emphasis on digital signal processing techniques and obstacles. It has been determined that while a robust, efficient, long-range, and non-invasive eye tracking system will be difficult to develop, such as a project is indeed feasible.

  14. FEASIBILITY STUDY OF PRESSURE PULSING PIPELINE UNPLUGGING TECHNOLOGIES FOR HANFORD

    Energy Technology Data Exchange (ETDEWEB)

    Servin, M. A. [Washington River Protection Solutions, LLC, Richland, WA (United States); Garfield, J. S. [AEM Consulting, LLC (United States); Golcar, G. R. [AEM Consulting, LLC (United States)

    2012-12-20

    The ability to unplug key waste transfer routes is generally essential for successful tank farms operations. All transfer lines run the risk of plugging but the cross site transfer line poses increased risk due to its longer length. The loss of a transfer route needed to support the waste feed delivery mission impacts the cost and schedule of the Hanford clean up mission. This report addresses the engineering feasibility for two pressure pulse technologies, which are similar in concept, for pipeline unplugging.

  15. Feasibility study of simultaneous capacitance detection during STM of silicon

    Science.gov (United States)

    Kim, Hyun; Dwyer, Kevin; Pomeroy, Joshua

    2015-03-01

    We are examining the feasibility of capacitance detection during STM to image buried metal nanostructures in silicon. As the hydrogen STM lithography for quantum information enables us to fabricate the atomically precise devices such as single atom qubits, the accurate alignment of metal contacts such as electrodes to the buried nanostructures on the surface becomes very challenging. Using SCM with STM gives benefits to locate the buried nanostructures and image the surface morphology simultaneously.

  16. Feasibility study to establish a new value chain

    DEFF Research Database (Denmark)

    Ingrid Herman, Marie; Thai, Thi Minh

    and starting to valorize New Caledonian horticulture on international markets. Once goals were understood, four interrelated analyses were conducted continuously: enabling environment, productivity, structuration, and feasibility analysis. In the enabling environment, analysis of market, institution...... as potential vulnerabilities. In this case, a wild-harvesting activity would not allow valorizing horticulture as conceived by local horticulturists since these give preference to controlled replication in delimited spaces and do not consider wild-harvesting as a horticultural activity. Hence, research...

  17. Seabed Filter Feasibility Study of Om Almisk Island

    KAUST Repository

    Sesler, Kathryn

    2012-06-01

    Freshwater access has always been and is continuing to be a severe problem in desert coastal regions, despite the fact that they have an unlimited supply of easily accessible saline water. Water desalination plants are well established and heavily relied upon throughout the Middle East, Saudi Arabia in particular. However, water desalination tends to be a very expensive and energy intensive solution to the problem. The transition from using open water intake systems and all of the pretreatment processes that they require, to using seabed water filters as an intake, would potentially reduce the lifetime costs, energy consumption, and environmental impacts commonly associated with water desalination. This is because the filtration process that the seabed filter generates, serves as sufficient pretreatment for seawater as well as eliminating any risk of entrainment or impingement of marine organisms. The main objective of this research is to conduct a feasibility study on Om Almisk Island, an island off the coast of King Abdullah University of Science and Technology (KAUST), to determine if it would be a suitable location to construct a seabed water filter as a replacement for the current open water intake. The Om Almisk Island site was evaluated through collection of sand samples over a radial grid around Om Almisk Island and sample analysis using grain size distribution, porosity, and hydraulic conductivity. The lack of mud, high hydraulic conductivity, proximity to KAUST, and the shallow waters of the sandy apron surrounding Om Almisk Island make this an ideal location for a seabed water filter to be used as an intake and pretreatment for the KAUST desalination plant. This location also has low tide change and the presence of benthic macrofauna to create bioturbation in the sediments, which could inhibit the growth of a schmutzdecke. If this biological layer forms, it could drastically reduce the hydraulic conductivity of the system. Due to the high hydraulic

  18. PTHA Feasibility: a Case Study in the Mediterranean

    Science.gov (United States)

    Lorito, S.; Basili, R.; Selva, J.; Romano, F.; Tiberti, M.; Piatanesi, A.; Kastelic, V.

    2012-12-01

    We propose a possible strategy for making Probabilistic Tsunami Hazard Assessment (PTHA) feasible. In principle, our approach can include all known tsunamigenic seismic sources, and numerically simulated tsunami generation propagation and inundation, within an explicit uncertainty treatment. For a given target zone, we start considering the available knowledge on submarine faults geometry and behavior to define a likely over-complete set of causative scenarios. We then calculate tsunami hazard based on wave propagation in the linear approximation ('linear PTHA'), expressed as a probability of exceeding some damage metric threshold in a given time at points at a fixed depth on the seafloor. This choice lessens the computational demand with respect to calculating inundation, and it is performed using a mixed logic/event tree approach which includes, wherever possible, the formal and explicit treatment of epistemic and aleatory uncertainties. We subsequently filter out from our scenario ensemble only the earthquakes giving a significant contribution at the target site by means of a two-step filter. The first step investigates the cumulative distribution of the damage metric to select the regions of the source parameters space that are important to PTHA. The second step uses a pattern recognition technique for undersampling the region of interest without significantly altering PTHA results. The outcome is a significantly reduced minimum set of earthquake scenarios that has to be used for calculating the computationally demanding PTHA inundation maps ('nonlinear PTHA'). Here, we present a case study in the Central Mediterranean sea to illustrate the full procedure for a section of the Hellenic Arc as a source zone and for two target zones, Eastern Sicily and Southern Crete. Extending the procedure to include stochastic slip distributions for the near-field PTHA is straightforward in the event tree; non-seismic sources such as gravitational collapses might be considered

  19. Wind power in Antarctica - a feasibility study for Wasa

    Energy Technology Data Exchange (ETDEWEB)

    Lindquist, Anna [Uppsala Univ. (Sweden). Div. for Electricity and Lightning Research

    2004-07-01

    The Swedish Polar Research Secretariat maintains two research stations in Antarctica, Wasa and Svea. They are both small, summer-only stations that are manned a few months at a time during the regular expeditions to the continent. Recently, Swedish scientists asked for the possibility to make around-the-year measurements with automatic equipment at the two stations. Since Wasa and Svea are only manned occasionally, this request implies the need for a new power supply system. The demands imposed on this new, separate system are hard. The continent is the coldest, windiest and driest on earth and the power supply system must be designed to withstand the harsh conditions. Since there is no personnel present during the Antarctic winter, the system also has to be autonomous and very reliable. The environment in Antarctica is sensitive and protected by strict regulations that all members of the Antarctic Treaty are obliged to follow. More and more nations are revising their power supply systems in order to find substitutions for the conventional diesel generators, and wind power has been installed at several stations and has worked well in many cases. This master thesis project is a feasibility study aimed at investigating whether wind power is a convenient solution in a separate power supply system at Wasa. During the project, wind data from weather stations in Antarctica have been used to map the wind resources at the two research stations. Although more accurate wind measurements would be needed for a complete evaluation of the wind resources, it can be seen that the prerequisites for wind power are good at Wasa. The wind is very directional, the wind speeds are moderate and the temperatures not too low. A wind turbine modified for the climate in Antarctica should function well at Wasa, in combination with a battery bank with NiCd batteries. Two turbines that fulfil most of the demands imposed on them and that seem to perform well in the conditions at Wasa were found

  20. A feasibility study for an International Year of Landcare

    Science.gov (United States)

    Mutota, E.; Arnalds, A.

    2009-04-01

    Human-induced activities place enormous pressures on the land worldwide, creating competition and conflict, and suboptimal use of the land. Climate change, loss of biodiversity and land degradation leads to decreasing productivity, food and water shortages, and reduced economic benefits, among others. In order to address these challenges and achieve sustainability goals, the need to change the way global resources are being utilized is crucial. A holistic and integrated community-based approach such as Landcare could be a viable approach to meet this worldwide challenge. Landcare is about committed people working together on land rehabilitation and restoration projects at the local level, transforming attitudes and stimulating new ideas among land users, generating support and building partnerships between and among local communities, governments and the private sector. Landcare initiatives have grown in a number of countries where success stories of actions on the ground clearly show the wider application of the Landcare approach in resolving many of the world's environmental problems and livelihood challenges. However, the potential of Landcare have not yet been widely exploited on a scale that really matters—as local actions build up towards global progress, there is more scope for unified efforts towards a global Landcare movement. Following the recommendation given at the International Forum on Soils, Society and Global Change in 2007 in Iceland (http://www.iisd.ca/YMB/SDFSS/), an International Year of Landcare should be established. Such a year would bring into focus efforts to build local capacity and share knowledge and experiences between provinces, countries and continents on Landcare. Additionally, holding a year concerned with Landcare would greatly contribute to the attainment of the Millennium Development Goals, the UN environmental conventions and many other sustainability goals. Our study supports the notion that Landcare offers a robust platform

  1. Adverse reproductive outcomes in families of atomic veterans: the feasibility of epidemiologic studies

    National Research Council Canada - National Science Library

    Institute of Medicine Staff

    1995-01-01

    ... Veterans: The Feasibility of Epidemiologic Studies Committee to Study the Feasibility of, and Need for, Epidemiologic Studies of Adverse Reproductive Outcomes in the Families of Atomic Veterans Medical Follow-up Agency INSTITUTE OF MEDICINE NATIONAL ACADEMY PRESS Washington, D.C. 1995 i Copyrightoriginal retained, the be not from cannot book, ...

  2. 43 CFR 404.48 - What process will Reclamation follow to determine if a feasibility study is ready for review?

    Science.gov (United States)

    2010-10-01

    ... determine if a feasibility study is ready for review? 404.48 Section 404.48 Public Lands: Interior... SUPPLY PROGRAM Feasibility Studies § 404.48 What process will Reclamation follow to determine if a feasibility study is ready for review? (a) Reclamation will evaluate whether the feasibility study...

  3. Formal feasibility studies in palliative care: why they are important and how to conduct them.

    Science.gov (United States)

    Hagen, Neil A; Biondo, Patricia D; Brasher, Penny M A; Stiles, Carla R

    2011-08-01

    The concept of clinical trial feasibility is of great interest to the community of palliative care researchers, clinicians, and granting agencies. Significant allocation of resources is required in the form of funding, time, intellect, and motivation to carry out clinical research, and understandably, clinical investigators, institutions, and granting agencies are disappointed when funded trials are unsuccessfully conducted. We argue that for many trials conducted in palliative care, the feasibility of conducting the proposed trial should be formally explored before implementation. There is substantial information available within the literature on the topic of study feasibility but no singular guide on how one can pragmatically apply this advice in the palliative care setting. We suggest that a Formal Feasibility Study for palliative care trials should be commonly conducted before development of a larger pivotal trial, to prospectively identify barriers to research, develop strategies to address these barriers, and predict whether the larger study is feasible. If a Formal Feasibility Study is not required, elements of feasibility can be specifically tested before launching clinical trials. The purpose of this article is to offer a draft framework for the design and conduct of a Formal Feasibility Study that, if implemented, could concretely support successful completion of high-quality research in a timely fashion. Additionally, we hope to foster dialogue within the palliative care research community regarding the relevance of establishing feasibility before initiation of definitive trials in the palliative care population.

  4. Feasibility study of sedimentary enhanced geothermal systems using reservoir simulation

    Science.gov (United States)

    Cho, Jae Kyoung

    The objective of this research is to evaluate the preliminary feasibility of commercial geothermal projects, from a sedimentary reservoir with low permeability that requires productivity enhancement, using numerical reservoir simulation. The performance of a sedimentary geothermal reservoir is investigated in terms of reservoir hydraulics and thermal evolution. To build a reliable benchmark for simulation study, validation of the numerical reservoir model with respect to an analytical model is presented, and the process to achieve an acceptable match between the numerical and analytical solutions is described. The analytical model used in this study is based on the work of Gringarten (1978), which consists of a conceptual geothermal reservoir, considering an injection and production well doublet in a homogeneous porous media. A commercial thermal reservoir simulator (STARS from Computer Modeling Group, CMG) is used in this work for numerical modeling. In order to reproduce the analytical model results, the numerical simulation model is modified to include the same assumptions of the analytical model. Simulation model parameters that make the numerical results deviate from the analytical solution, such as the grid block size, time step and no-flow boundary are identified and investigated. An analytical tracer test model proposed by Shook (2000) is numerically modeled. This model allows us to predict the time when the temperature of the produced water decreases by capturing a tracer component at production well. Reservoir simulation models with different porosity and permeability distribution are tested to see the effects of reservoir inhomogeneity and anisotropy. In particular, premature thermal breakthrough due to the presence of high permeability streak in a reservoir model is simulated. In an effort to apply the knowledge we obtained from the analytical solutions, the effects of reservoir rock and water properties, as a function of pressure and temperature, are

  5. Can microbes compete with cows for sustainable protein production - A feasibility study on high quality protein

    DEFF Research Database (Denmark)

    Vestergaard, Mike; Chan, Siu Hung Joshua; Jensen, Peter Ruhdal

    2016-01-01

    between the market prices of substrates, product output and the efficiency of microbial production. A case study with the food protein, Bovine Alpha Lactalbumin was made to evaluate the upstream economic feasibilities. Simulations with different substrate profiles at maximum productivity were used...... to explore the feasibility of recombinant Bovine Alpha Lactalbumin production coupled with market prices of utilized materials. We found that recombinant protein production could be a feasible food source and an alternative to traditional sources....

  6. LDRD project 151362 : low energy electron-photon transport.

    Energy Technology Data Exchange (ETDEWEB)

    Kensek, Ronald Patrick; Hjalmarson, Harold Paul; Magyar, Rudolph J.; Bondi, Robert James; Crawford, Martin James

    2013-09-01

    At sufficiently high energies, the wavelengths of electrons and photons are short enough to only interact with one atom at time, leading to the popular %E2%80%9Cindependent-atom approximation%E2%80%9D. We attempted to incorporate atomic structure in the generation of cross sections (which embody the modeled physics) to improve transport at lower energies. We document our successes and failures. This was a three-year LDRD project. The core team consisted of a radiation-transport expert, a solid-state physicist, and two DFT experts.

  7. Defining Feasibility and Pilot Studies in Preparation for Randomised Controlled Trials: Development of a Conceptual Framework.

    Science.gov (United States)

    Eldridge, Sandra M; Lancaster, Gillian A; Campbell, Michael J; Thabane, Lehana; Hopewell, Sally; Coleman, Claire L; Bond, Christine M

    2016-01-01

    We describe a framework for defining pilot and feasibility studies focusing on studies conducted in preparation for a randomised controlled trial. To develop the framework, we undertook a Delphi survey; ran an open meeting at a trial methodology conference; conducted a review of definitions outside the health research context; consulted experts at an international consensus meeting; and reviewed 27 empirical pilot or feasibility studies. We initially adopted mutually exclusive definitions of pilot and feasibility studies. However, some Delphi survey respondents and the majority of open meeting attendees disagreed with the idea of mutually exclusive definitions. Their viewpoint was supported by definitions outside the health research context, the use of the terms 'pilot' and 'feasibility' in the literature, and participants at the international consensus meeting. In our framework, pilot studies are a subset of feasibility studies, rather than the two being mutually exclusive. A feasibility study asks whether something can be done, should we proceed with it, and if so, how. A pilot study asks the same questions but also has a specific design feature: in a pilot study a future study, or part of a future study, is conducted on a smaller scale. We suggest that to facilitate their identification, these studies should be clearly identified using the terms 'feasibility' or 'pilot' as appropriate. This should include feasibility studies that are largely qualitative; we found these difficult to identify in electronic searches because researchers rarely used the term 'feasibility' in the title or abstract of such studies. Investigators should also report appropriate objectives and methods related to feasibility; and give clear confirmation that their study is in preparation for a future randomised controlled trial designed to assess the effect of an intervention.

  8. Defining Feasibility and Pilot Studies in Preparation for Randomised Controlled Trials: Development of a Conceptual Framework.

    Directory of Open Access Journals (Sweden)

    Sandra M Eldridge

    Full Text Available We describe a framework for defining pilot and feasibility studies focusing on studies conducted in preparation for a randomised controlled trial. To develop the framework, we undertook a Delphi survey; ran an open meeting at a trial methodology conference; conducted a review of definitions outside the health research context; consulted experts at an international consensus meeting; and reviewed 27 empirical pilot or feasibility studies. We initially adopted mutually exclusive definitions of pilot and feasibility studies. However, some Delphi survey respondents and the majority of open meeting attendees disagreed with the idea of mutually exclusive definitions. Their viewpoint was supported by definitions outside the health research context, the use of the terms 'pilot' and 'feasibility' in the literature, and participants at the international consensus meeting. In our framework, pilot studies are a subset of feasibility studies, rather than the two being mutually exclusive. A feasibility study asks whether something can be done, should we proceed with it, and if so, how. A pilot study asks the same questions but also has a specific design feature: in a pilot study a future study, or part of a future study, is conducted on a smaller scale. We suggest that to facilitate their identification, these studies should be clearly identified using the terms 'feasibility' or 'pilot' as appropriate. This should include feasibility studies that are largely qualitative; we found these difficult to identify in electronic searches because researchers rarely used the term 'feasibility' in the title or abstract of such studies. Investigators should also report appropriate objectives and methods related to feasibility; and give clear confirmation that their study is in preparation for a future randomised controlled trial designed to assess the effect of an intervention.

  9. NIR spectrometry for counterfeit drug detection - A feasibility study

    DEFF Research Database (Denmark)

    Rodionova, O.Y.; Houmøller, Lars P.; Pomerantsev, A.L.

    2005-01-01

    Express-methods for detection of counterfeit drugs are of vital necessity. Visual control, dissociating tests or simple color reaction tests reveal only very rough forgeries. The feasibility of information-rich NIR-measurements as an analytical method together with multivariate calibration...... for mathematical data processing for false drugs detection is demonstrated. Also, multivariate hyperspectral image analysis is applied providing additional diagnostic information. Hyperspectral imaging is becoming a useful diagnostic tool for identifying non-homogeneous spatial regions of drug formulation. Two...... types of drugs are used to demonstrate the applicability of these approaches....

  10. Failure Modes and Effects Analysis (FMEA) Assistant Tool Feasibility Study

    Science.gov (United States)

    Flores, Melissa D.; Malin, Jane T.; Fleming, Land D.

    2013-09-01

    An effort to determine the feasibility of a software tool to assist in Failure Modes and Effects Analysis (FMEA) has been completed. This new and unique approach to FMEA uses model based systems engineering concepts to recommend failure modes, causes, and effects to the user after they have made several selections from pick lists about a component's functions and inputs/outputs. Recommendations are made based on a library using common failure modes identified over the course of several major human spaceflight programs. However, the tool could be adapted for use in a wide range of applications from NASA to the energy industry.

  11. Failure Modes and Effects Analysis (FMEA) Assistant Tool Feasibility Study

    Science.gov (United States)

    Flores, Melissa; Malin, Jane T.

    2013-01-01

    An effort to determine the feasibility of a software tool to assist in Failure Modes and Effects Analysis (FMEA) has been completed. This new and unique approach to FMEA uses model based systems engineering concepts to recommend failure modes, causes, and effects to the user after they have made several selections from pick lists about a component s functions and inputs/outputs. Recommendations are made based on a library using common failure modes identified over the course of several major human spaceflight programs. However, the tool could be adapted for use in a wide range of applications from NASA to the energy industry.

  12. 41 CFR 101-5.104-6 - Conduct of feasibility studies.

    Science.gov (United States)

    2010-07-01

    ... FEDERAL BUILDINGS AND COMPLEXES 5.1-General § 101-5.104-6 Conduct of feasibility studies. An initial... and detailed procedures to be followed in the conduct of each feasibility study. Arrangements will be... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Conduct of...

  13. Kaohsiung Municipal Government: Feasibility study for Kaohsiung hazardous waste management plan. Executive summary. Export trade information

    Energy Technology Data Exchange (ETDEWEB)

    1988-08-01

    The document is the Executive Summary of a report resulting from a feasibility study conducted for the Republic of China. The objective of the study was to: survey hazardous industrial wastes within Kaohsiung Municipality, analyze the feasibility for planning a hazardous waste treatment and disposal system, develop recommendations for waste minimization and transportation, and identify possible methods of private sector operation.

  14. Kaohsiung Municipal Government: Feasibility study for Kaohsiung Hazardous Waste Management Plan. English report. Export trade information

    Energy Technology Data Exchange (ETDEWEB)

    1988-08-01

    The report is the result of a feasibility study conducted for the Republic of China. The primary objectives of the study was to: survey hazardous industrial wastes within Kaohsiung Municipality, analyze the feasibility for the planning of a centralized hazardous waste treatment and disposal system, develop recommendations for waste minimization and transportation, and to identify possible methods of private sector operation.

  15. Space shuttle program information control and retrieval system feasibility study report

    Science.gov (United States)

    Lingle, C. P.

    1973-01-01

    The feasibility of having a common information management network for space shuttle data, is studied. Identified are the information types required, sources and users of the information, and existing techniques for acquiring, storing and retrieving the data. The study concluded that a decentralized system is feasible, and described a recommended development plan for it.

  16. Feasibility of cold snare polypectomy in Japan: A pilot study

    Institute of Scientific and Technical Information of China (English)

    Yoji; Takeuchi; Takeshi; Yamashina; Noriko; Matsuura; Takashi; Ito; Mototsugu; Fujii; Kengo; Nagai; Fumi; Matsui; Tomofumi; Akasaka; Noboru; Hanaoka; Koji; Higashino; Hiroyasu; Iishi; Ryu; Ishihara; Henrik; Thorlacius; Noriya; Uedo

    2015-01-01

    AIM: To investigate the feasibility of cold snare polypectomy(CSP) in Japan.METHODS: The outcomes of 234 non-pedunculated polyps smaller than 10 mm in 61 patients who underwent CSP in a Japanese referral center were retrospectively analyzed. The cold snare polypectomies were performed by nine endoscopists with no prior experience in CSP using an electrosurgical snare without electrocautery.RESULTS: CSPs were completed for 232 of the 234 polyps. Two(0.9%) polyps could not be removed without electrocautery. Immediate postpolypectomy bleeding requiring endoscopic hemostasis occurred in eight lesions(3.4%; 95%CI: 1.1%-5.8%), but all were easily managed. The incidence of immediate bleeding after CSP for small polyps(6-9 mm) was significantly higher than that of diminutive polyps(≤ 5 mm; 15% vs 1%, respectively). Three(5%) patients complained of minor bleeding after the procedure but required no intervention. The incidence of delayed bleeding requiringendoscopic intervention was 0.0%(95%CI: 0.0%-1.7%). In total, 12% of the resected lesions could not be retrieved for pathological examination. Tumor involvement in the lateral margin could not be histologically assessed in 70(40%) lesions.CONCLUSION: CSP is feasible in Japan. However, immediate bleeding, retrieval failure and uncertain assessment of the lateral tumor margin should not be underestimated. Careful endoscopic diagnosis before and evaluation of the tumor residue after CSP are recommended when implementing CSP in Japan.

  17. Wisconsin Elementary Teacher Education Project. Volume VI, Feasibility Study: Pricing and Economic Analysis Study. Final Report.

    Science.gov (United States)

    Wisconsin Univ., Madison.

    This document is the second volume of the feasibility study report for the Wisconsin Elementary Teacher Education Project. It provides in part 1 data on program, planning and budgeting, including cost figures for preparing students in the present and new programs, marginal expenses, and costs for implementing the program on other campuses. Part 2…

  18. Feasibility study on recovering hydrogen energy from industrial wastewater

    Energy Technology Data Exchange (ETDEWEB)

    Ming Der BAI; Chia-Jung HSIAO [Energy and Resource Laboratories, Industrial Technology Research Institute, 195, sec. 4 Chung Hsing Rd., Chutung, Hsinchu, Taiwan, 301 R.O.C. (China)

    2006-07-01

    Three wastewater obtained from different industries were evaluated for the feasibility of hydrogen fermentation. Because of the various components of the wastewater, the characteristics of the hydrogen accumulation were different. Several stages with different hydrogen producing rate were observed during the batch hydrogen fermentation of each wastewater. The obvious hydrogen consumption was observed in the last phase of hydrogen fermentation of the wastewater from the winery. It is similar to the reported hydrogen fermentation characteristic of starch. The wastewater coming from the fructose manufactory has the greatest hydrogen potential nearly 150 L-H{sub 2}/kg-COD. The wastewater from food industry has the lower hydrogen potential of 65 L-H{sub 2}/kg-COD. Some of its compounds were not suitable for hydrogen production. The lowest hydrogen potential was observed in the fermentation of the wastewater from the winery, because hydrogen consumption affects the hydrogen recovery from the wastewater from winery. (authors)

  19. Feasibility study on recovering hydrogen energy from industrial wastewater

    Energy Technology Data Exchange (ETDEWEB)

    Ming Der Bai; Chia-Jung Hsiao [Energy and Resource Laboratories, Industrial Technology Research Institute, 195, sec. 4 Chung Hsing Rd., Chutung, Hsinchu, Taiwan, 301 R.O.C. (China)

    2006-07-01

    Three wastewater obtained from different industries were evaluated for the feasibility of hydrogen fermentation. Because of the various components of the wastewater, the characteristics of the hydrogen accumulation were different. Several stages with different hydrogen producing rate were observed during the batch hydrogen fermentation of each wastewater. The obvious hydrogen consumption was observed in the last phase of hydrogen fermentation of the wastewater from the winery. It is similar to the reported hydrogen fermentation characteristic of starch. The wastewater coming from the fructose manufactory has the greatest hydrogen potential nearly 150 L-H{sub 2}/kg-COD. The wastewater from food industry has the lower hydrogen potential of 65 L-H{sub 2}/kg-COD. Some of its compounds were not suitable for hydrogen production. The lowest hydrogen potential was observed in the fermentation of the wastewater from the winery, because hydrogen consumption affects the hydrogen recovery from the wastewater from winery. (authors)

  20. Feasibility study for future implantable neural-silicon interface devices.

    Science.gov (United States)

    Al-Armaghany, Allann; Yu, Bo; Mak, Terrence; Tong, Kin-Fai; Sun, Yihe

    2011-01-01

    The emerging neural-silicon interface devices bridge nerve systems with artificial systems and play a key role in neuro-prostheses and neuro-rehabilitation applications. Integrating neural signal collection, processing and transmission on a single device will make clinical applications more practical and feasible. This paper focuses on the wireless antenna part and real-time neural signal analysis part of implantable brain-machine interface (BMI) devices. We propose to use millimeter-wave for wireless connections between different areas of a brain. Various antenna, including microstrip patch, monopole antenna and substrate integrated waveguide antenna are considered for the intra-cortical proximity communication. A Hebbian eigenfilter based method is proposed for multi-channel neuronal spike sorting. Folding and parallel design techniques are employed to explore various structures and make a trade-off between area and power consumption. Field programmable logic arrays (FPGAs) are used to evaluate various structures.

  1. Coaching at the Building Site – A Feasibility Study

    DEFF Research Database (Denmark)

    Koch, Christian; Alsdorf, Morten; Sander, Dag

    2006-01-01

    Coaching has become widely used in business, and is well described. However it is rarely used in construction. This makes a contrast to the poor performance of site interaction, leading to a vast amount of reported cooperation and coordination problems. This paper investigates the feasibility...... of a coaching approach to site management. The coach is a person who helps and guides another person or group to maximize his /their own capacity. Coaching arguably is useful in many different work situations, for example problem solving, group working and planning. These assumptions are evaluated through...... observations in a building site operating with lean construction, where the managers did not use coaching consciously in their interaction with employees. 29 participant observations of five of the managers at the building site were carried out, at individual- and group meetings. Coaching can be used...

  2. On-Line Adaptive Radiation Therapy: Feasibility and Clinical Study

    Directory of Open Access Journals (Sweden)

    Taoran Li

    2010-01-01

    Full Text Available The purpose of this paper is to evaluate the feasibility and clinical dosimetric benefit of an on-line, that is, with the patient in the treatment position, Adaptive Radiation Therapy (ART system for prostate cancer treatment based on daily cone-beam CT imaging and fast volumetric reoptimization of treatment plans. A fast intensity-modulated radiotherapy (IMRT plan reoptimization algorithm is implemented and evaluated with clinical cases. The quality of these adapted plans is compared to the corresponding new plans generated by an experienced planner using a commercial treatment planning system and also evaluated by an in-house developed tool estimating achievable dose-volume histograms (DVHs based on a database of existing treatment plans. In addition, a clinical implementation scheme for ART is designed and evaluated using clinical cases for its dosimetric qualities and efficiency.

  3. Final Report for the Virtual Reliability Realization System LDRD

    Energy Technology Data Exchange (ETDEWEB)

    DELLIN, THEODORE A.; HENDERSON, CHRISTOPHER L.; O' TOOLE, EDWARD J.

    2000-12-01

    Current approaches to reliability are not adequate to keep pace with the need for faster, better and cheaper products and systems. This is especially true in high consequence of failure applications. The original proposal for the LDRD was to look at this challenge and see if there was a new paradigm that could make reliability predictions, along with a quantitative estimate of the risk in that prediction, in a way that was faster, better and cheaper. Such an approach would be based on the underlying science models that are the backbone of reliability predictions. The new paradigm would be implemented in two software tools: the Virtual Reliability Realization System (VRRS) and the Reliability Expert System (REX). The three-year LDRD was funded at a reduced level for the first year ($120K vs. $250K) and not renewed. Because of the reduced funding, we concentrated on the initial development of the expertise system. We developed an interactive semiconductor calculation tool needed for reliability analyses. We also were able to generate a basic functional system using Microsoft Siteserver Commerce Edition and Microsoft Sequel Server. The base system has the capability to store Office documents from multiple authors, and has the ability to track and charge for usage. The full outline of the knowledge model has been incorporated as well as examples of various types of content.

  4. Nanoporous Silica Templated HeteroEpitaxy: Final LDRD Report.

    Energy Technology Data Exchange (ETDEWEB)

    Burckel, David Bruce; Koleske, Daniel; Rowen, Adam M.; Williams, John Dalton; Fan, Hongyou; Arrington, Christian Lew

    2006-11-01

    This one-year out-of-the-box LDRD was focused on exploring the use of porous growth masks as a method for defect reduction during heteroepitaxial crystal growth. Initially our goal was to investigate porous silica as a growth mask, however, we expanded the scope of the research to include several other porous growth masks on various size scales, including mesoporous carbon, and the UV curable epoxy, SU-8. Use of SU-8 as a growth mask represents a new direction, unique in the extensive literature of patterned epitaxial growth, and presents the possibility of providing a single step growth mask. Additional research included investigation of pore viability via electrochemical deposition into high aspect ratio photoresist patterns and pilot work on using SU-8 as a DUV negative resist, another significant potential result. While the late start nature of this project pushed some of the initial research goals out of the time table, significant progress was made. 3 Acknowledgements This work was performed in part at the Nanoscience @ UNM facility, a member of the National Nanotechnology Infrastructure Network, which is supported by the National Science Foundation (Grant ECS 03-35765). Sandia is multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United Stated Department of Energy's National Nuclear Security Administration under Contract DE-AC04-94AL85000. This work was supported under the Sandia LDRD program (Project 99405). 4

  5. LDRD final report: Physical simulation of nonisothermal multiphase multicomponent flow in porous media

    Energy Technology Data Exchange (ETDEWEB)

    Martinez, M.J.; Hopkins, P.L.; Shadid, J.N.

    1997-07-01

    This document reports on the accomplishments of a laboratory-directed research and development (LDRD) project whose objective was to initiate a research program for developing a fundamental understanding of multiphase multicomponent subsurface transport in heterogeneous porous media and to develop parallel processing computational tools for numerical simulation of such problems. The main achievement of this project was the successful development of a general-purpose, unstructured grid, multiphase thermal simulator for subsurface transport in heterogeneous porous media implemented for use on massively parallel (MP) computers via message-passing and domain decomposition techniques. The numerical platform provides an excellent base for new and continuing project development in areas of current interest to SNL and the DOE complex including, subsurface nuclear waste disposal and cleanup, groundwater availability and contamination studies, fuel-spill transport for accident analysis, and DNAPL transport and remediation.

  6. LDRD 2014 Annual Report: Laboratory Directed Research and Development Program Activities

    Energy Technology Data Exchange (ETDEWEB)

    Hatton, Diane [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2015-03-01

    Each year, Brookhaven National Laboratory (BNL) is required to provide a program description and overview of its Laboratory Directed Research and Development Program (LDRD) to the Department of Energy (DOE) in accordance with DOE Order 413.2B dated April 19, 2006. This report provides a detailed look at the scientific and technical activities for each of the LDRD projects funded by BNL in FY 2014, as required. In FY 2014, the BNL LDRD Program funded 40 projects, 8 of which were new starts, at a total cost of $9.6M.

  7. Selected Examples of LDRD Projects Supporting Test Ban Treaty Verification and Nonproliferation

    Energy Technology Data Exchange (ETDEWEB)

    Jackson, K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Al-Ayat, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Walter, W. R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-02-23

    The Laboratory Directed Research and Development (LDRD) Program at the DOE National Laboratories was established to ensure the scientific and technical vitality of these institutions and to enhance the their ability to respond to evolving missions and anticipate national needs. LDRD allows the Laboratory directors to invest a percentage of their total annual budget in cutting-edge research and development projects within their mission areas. We highlight a selected set of LDRD-funded projects, in chronological order, that have helped provide capabilities, people and infrastructure that contributed greatly to our ability to respond to technical challenges in support of test ban treaty verification and nonproliferation.

  8. LDRD 2015 Annual Report: Laboratory Directed Research and Development Program Activities

    Energy Technology Data Exchange (ETDEWEB)

    Hatton, D. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2015-12-31

    Each year, Brookhaven National Laboratory (BNL) is required to provide a program description and overview of its Laboratory Directed Research and Development Program (LDRD) to the Department of Energy (DOE) in accordance with DOE Order 413.2B dated April 19, 2006. This report provides a detailed look at the scientific and technical activities for each of the LDRD projects funded by BNL in FY 2015, as required. In FY 2015, the BNL LDRD Program funded 43 projects, 12 of which were new starts, at a total cost of $9.5M.

  9. Final report on LDRD project : biodiesel production from vegetable oils using slit-channel reactors.

    Energy Technology Data Exchange (ETDEWEB)

    Kalu, E. Eric (FAMU-FSU College of Engineering, Tallahassee, FL); Chen, Ken Shuang

    2008-01-01

    This report documents work done for a late-start LDRD project, which was carried out during the last quarter of FY07. The objective of this project was to experimentally explore the feasibility of converting vegetable (e.g., soybean) oils to biodiesel by employing slit-channel reactors and solid catalysts. We first designed and fabricated several slit-channel reactors with varying channel depths, and employed them to investigate the improved performance of slit-channel reactors over traditional batch reactors using a NaOH liquid catalyst. We then evaluated the effectiveness of several solid catalysts, including CaO, ZnO, MgO, ZrO{sub 2}, calcium gluconate, and heteropolyacid or HPA (Cs{sub 2.5}H{sub 0.5}PW{sub 12}O{sub 40}), for catalyzing the soybean oil-to-biodiesel transesterification reaction. We found that the slit-channel reactor performance improves as channel depth decreases, as expected; and the conversion efficiency of a slit-channel reactor is significantly higher when its channel is very shallow. We further confirmed CaO as having the highest catalytic activity among the solid catalysts tested, and we demonstrated for the first time calcium gluconate as a promising solid catalyst for converting soybean oil to biodiesel, based on our preliminary batch-mode conversion experiments.

  10. Renewable Energy Development on Fort Mojave Reservation Feasiblity Study

    Energy Technology Data Exchange (ETDEWEB)

    Russell Gum, ERCC analytics LLC

    2008-03-17

    The Ft. Mojave tribe, whose reservation is located along the Colorado River in the states of Arizona, California, and Nevada near the point where all three states meet, has a need for increased energy supplies. This need is a direct result of the aggressive and successful economic development projects undertaken by the tribe in the last decade. While it is possible to contract for additional energy supplies from fossil fuel sources it was the desire of the tribal power company, AHA MACAV Power Service (AMPS) to investigate the feasibility and desirability of producing power from renewable sources as an alternative to increased purchase of fossil fuel generated power and as a possible enterprise to export green power. Renewable energy generated on the reservation would serve to reduce the energy dependence of the tribal enterprises on off reservation sources of energy and if produced in excess of reservation needs, add a new enterprise to the current mix of economic activities on the reservation. Renewable energy development would also demonstrate the tribe’s support for improving environmental quality, sustainability, and energy independence both on the reservation and for the larger community.

  11. Privatization and the allure of franchising: a Zambian feasibility study.

    Science.gov (United States)

    Fiedler, John L; Wight, Jonathan B

    2003-01-01

    Efforts to privatize portions of the health sector have proven more difficult to implement than had been anticipated previously. One common bottleneck encountered has been the traditional organizational structure of the private sector, with its plethora of independent, single physician practices. The atomistic nature of the sector has rendered many privatization efforts difficult, slow and costly-in terms of both organizational development and administration. In many parts of Africa, in particular, the shortages of human and social capital, and the fragile nature of legal institutions, undermine the appeal of privatization. The private sector is left with inefficiencies, high prices and costs, and a reduced effective demand. The result is the simultaneous existence of excess capacity and unmet need. One potential method to improve the efficiency of the private sector, and thereby enhance the likelihood of successful privatization, is to transfer managerial technology--via franchising--from models that have proven successful elsewhere. This paper presents a feasibility analysis of franchizing the successful Bolivian PROSALUD system's management package to Zambia. The assessment, based on PROSALUD's financial model, demonstrates that technology transfer requires careful adaptation to local conditions and, in this instance, would still require significant external assistance.

  12. R and D for the Feasibility Study of CLIC Technology

    CERN Document Server

    Braun, H; Geschonke, Günther; Guignard, Gilbert; Hübner, K; Wilson, Ian H

    2004-01-01

    An overview is given of the necessary R&D and particularly of the CLIC test facility CTF3 which is presently under construction for demonstrating the key issues related to the CLIC technology and to the two-beam scheme. The results concerning the commissioning of the injector and of the first part of the linac already built are summarized. The main R&D topics to be covered with this test infrastructure are described and the planned road-map in order to reach the pre-defined goals is indicated. The potential of CTF3 for checking the bunch-train recombination, testing RF accelerating structures, investigating the use of a drive-beam for RF power production, for bench-marking simulation codes and possibly making low-energy experiments related to linear collider R&D is presented. The activities required for the feasibility programme planned are given in the form of work packages, together with the needed but not available resources and the time schedule.

  13. Feasibility study of ECRH in NSTX-U startup plasma

    Science.gov (United States)

    Lopez, N. A.; Poli, F.; Taylor, G.; Harvey, R.; Petrov, Yu.

    2016-10-01

    A key mission goal of the National Spherical Torus eXperiment Upgrade (NSTX-U) is the demonstration of fully non-inductive startup and operation. In part to accomplish this, a 1MW, 28 GHz ECRH system is presently being developed for implementation on NSTX-U in 2018. Like most spherical tokamaks, NSTX-U operates in the overdense regime (fpe>fce) , which limits traditional ECRH to the early startup phase. An extensive modelling effort of the propagation and absorption of EC waves in the evolving plasma is thus required to define the most effective window of operation, and to optimize the launcher geometry for maximal heating and for current drive during this window. In fact, the ECRH system will play an important role in preparing a target plasma for subsequent injection of IC waves and NBI. Here we assess the feasibility of O1-mode ECRH in NSTX-U startup plasma at full field of 1T through time-dependent simulations performed with the transport solver TRANSP. Linear ray-tracing calculations conducted by GENRAY are coupled into the TRANSP framework, allowing the plasma equilibrium and the temperature profiles to evolve self-consistently in response to the injected microwave power. Furthermore, we investigate additional possibilities of heating and current drive made available through coupling the injected O-mode power to the electrostatic EBW via the slow X-mode as an intermediary.

  14. Material Identification Technology (MIT) concept technical feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Jones, J.L.; Harker, Y.D.; Yoon, W.Y.; Johnson, L.O.

    1993-09-01

    The Idaho National Engineering Laboratory (INEL) has initiated the design and development of a novel pulsed accelerator-based, active interrogation concept. The proposed concept, referred to as the Material Identification Technology (MIT), enables rapid (between accelerator pulses), non-destructive, elemental composition analysis of both nuclear and non-nuclear materials. Applications of this technique include material monitoring in support of counter-proliferation activities, such as export controls (at domestic and international inspection locations), SNM controls, nuclear weapon dismantlement, and chemical weapon verification. Material Identification Technology combines a pulsed, X-ray source (an electron accelerator) and a gamma detection system. The accelerator must maximize neutron production (pulse width, beam current, beam energy, and repetition rate) and minimize photon dose to the object. Current available accelerator technology can meet these requirements. The detection system must include detectors which provide adequate gamma energy resolution capability, rapid recovery after the initial X-ray interrogation pulse, and multiple single gamma event detection between accelerator pulses. Further research is required to develop the detection system. This report provides the initial feasibility assessment of the MIT concept.

  15. Feasibility Study of a HOM IOT for TESLA

    Science.gov (United States)

    Schütt, Petra; Weiland, Thomas; Gamp, Alexander; Lu, Fuhai

    1997-05-01

    For the TESLA linear collider 1.3 GHz RF sources with 10 MW peak power and about 70% efficiency are needed. As an alternative to the development of a Multibeam-Klystron, we investigate the feasibility of an IOT (Inductive Output Tube). This is a very compact RF source: The time structure of the beam is produced by a gated emission cathode and the output cavity is directly adjacent to the anode. Unlike IOTs, conventional klystrons lose some of their design efficiency when they are operated below saturation, because only the RF component of the beam is reduced and not the DC beam current. In contrast to this the cathode current of an IOT is controlled by the drive power. In order to keep the gun voltage low, we investigate a device with a hollow beam where the output cavity is excited in a higher order mode (HOM), as was recently suggested by CPI(E.Lien, H.Bohlen, US Patent Application Serial No. 08/413,034). Computer simulations are carried out with the CAD-system MAFIA. First, an existing Klystrode TM IOT built by CPI is analysed. Simulation results will be shown and compared to experimental data. Based upon this experience, a design strategy is discussed for the HOM IOT.

  16. Main group adducts of carbon dioxide and related chemistry (LDRD 149938).

    Energy Technology Data Exchange (ETDEWEB)

    Barry, Brian M. (University of New Mexico, Albuquerque, NM); Kemp, Richard Alan; Stewart, Constantine A.; Dickie, Diane A. (University of New Mexico, Albuquerque, NM)

    2010-11-01

    This late-start LDRD was broadly focused on the synthetic attempts to prepare novel ligands as complexing agents for main group metals for the sequestration of CO{sub 2}. In prior work we have shown that certain main group (p block elements) metals such as tin and zinc, when ligated to phosphinoamido- ligands, can bind CO{sub 2} in a novel fashion. Rather than simple insertion into the metal-nitrogen bonds to form carbamates, we have seen the highly unusual complexation of CO{sub 2} in a mode that is more similar to a chemical 'adduct' rather than complexation schemes that have been observed previously. The overarching goal in this work is to prepare more of these complexes that can (a) sequester (or bind) CO{sub 2} easily in this adduct form, and (b) be stable to chemical or electrochemical reduction designed to convert the CO{sub 2} to useful fuels or fuel precursors. The currently used phosphinoamido- ligands appear at this point to be less-stable than desired under electrochemical reduction conditions. This instability is believed due to the more delicate, reactive nature of the ligand framework system. In order to successfully capture and convert CO{sub 2} to useful organics, this instability must be addressed and solved. Work described in the late-start LDRD was designed to screen a variety of ligand/metal complexes that a priori are believed to be more stable to polar solvents and possible mild hydrolytic conditions than are the phosphinoamido-ligands. Results from ligand syntheses and metal complexation studies are reported.

  17. Feasibility study of a SiC sandwich neutron spectrometer

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Jian, E-mail: caepwujian@163.com [Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang 621900, Sichuan Province (China); Lei, Jiarong, E-mail: jiarong_lei@163.com [Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang 621900, Sichuan Province (China); Jiang, Yong; Chen, Yu; Rong, Ru; Zou, Dehui; Fan, Xiaoqiang [Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang 621900, Sichuan Province (China); Chen, Gang; Li, Li; Bai, Song [Nanjing Electronic Devices Institute, Nanjing 210016 (China)

    2013-04-21

    Semiconductor sandwich neutron spectrometers are suitable for in-pile measurements of fast reactor spectra thanks to their compact and relatively simple design. We have assembled and tested a sandwich neutron spectrometer based on 4H-silicon carbide (4H-SiC) Schottky diodes. The SiC diodes detect neutrons via neutron-induced charged particles (tritons and alpha particles) produced by {sup 6}Li(n,α){sup 3}H reaction. {sup 6}LiF neutron converter layers are deposited on the front surface of Schottky diodes by magnetron sputtering. The responses of SiC diodes to charged particles were investigated with an {sup 241}Am alpha source. A sandwich neutron spectrometer was assembled with two SiC Schottky diodes selected based on the charged-particle-response experimental results. The low-energy neutron response of the sandwich spectrometer was measured in the neutron field of the Chinese Fast Burst Reactor-II (CFBR-II). Spectra of alpha particles and tritons from {sup 6}Li(n,α){sup 3}H reaction were obtained with two well-resolved peaks. The energy resolution of the sum spectrum was 8.8%. The primary experimental results confirmed the 4H-SiC sandwich neutron spectrometer's feasibility. -- Highlights: ► Sandwich neutron spectrometer employing 4H-SiC as a detecting material has been developed for the first time. ► {sup 6}LiF neutron converter has been deposited on the surface of 4H-SiC Schottky diode. ► Preliminary testing results obtained with the 4H-SiC sandwich neutron spectrometer are presented.

  18. LDRD 2016 Annual Report: Laboratory Directed Research and Development Program Activities

    Energy Technology Data Exchange (ETDEWEB)

    Hatton, D. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2017-03-31

    Each year, Brookhaven National Laboratory (BNL) is required to provide a program description and overview of its Laboratory Directed Research and Development Program (LDRD) to the Department of Energy (DOE) in accordance with DOE Order 413.2C dated October 22, 2015. This report provides a detailed look at the scientific and technical activities for each of the LDRD projects funded by BNL in FY 2016, as required. In FY 2016, the BNL LDRD Program funded 48 projects, 21 of which were new starts, at a total cost of $11.5M. The investments that BNL makes in its LDRD program support the Laboratory’s strategic goals. BNL has identified four Critical Outcomes that define the Laboratory’s scientific future and that will enable it to realize its overall vision. Two operational Critical Outcomes address essential operational support for that future: renewal of the BNL campus; and safe, efficient laboratory operations.

  19. High-Assurance Software: LDRD Report.

    Energy Technology Data Exchange (ETDEWEB)

    Hulette, Geoffrey Compton

    2014-06-01

    This report summarizes our work on methods for developing high-assurance digital systems. We present an approach for understanding and evaluating trust issues in digital systems, and for us- ing computer-checked proofs as a means for realizing this approach. We describe the theoretical background for programming with proofs based on the Curry-Howard correspondence, connect- ing the field of logic and proof theory to programs. We then describe a series of case studies, intended to demonstrate how this approach might be adopted in practice. In particular, our stud- ies elucidate some of the challenges that arise with this style of certified programming, including induction principles, generic programming, termination requirements, and reasoning over infinite state spaces.

  20. STUDIES ON THE FEASIBILITY OF IUD RELEASING BOTH LEVONORGESTREL AND COPPER

    Institute of Scientific and Technical Information of China (English)

    LIUYun-Guo; WUXi-Rui

    1989-01-01

    Levonorgestrel ( LNG ) -and copper ions ( Cu++ ) are main active constituents of the medicated IUDs. In order to explore the feasibility of developing IUDs which could release both components, a comparative study of the effects of LNG-IUD,

  1. 75 FR 77897 - Long Walk National Historic Trail Feasibility Study, Abbreviated Final Environmental Impact...

    Science.gov (United States)

    2010-12-14

    ... trail would be designated, emphasizing the removal experiences common to both tribes. An auto tour route... National Park Service Long Walk National Historic Trail Feasibility Study, Abbreviated Final Environmental Impact Statement, National Trails Intermountain Region, NM AGENCY: National Park Service,...

  2. Feasibility study: hydroelectric generating potential, Newcastle and Charlo fish hatcheries for Department of Fisheries and Oceans

    National Research Council Canada - National Science Library

    1984-01-01

    ADI Limited were retained in March 1984 to carry out a feasibility study of potential hydroelectric generation at the Newcastle and Charlo hatchery sites, in accordance with their proposal submitted...

  3. FY08 LDRD Final Report Regional Climate

    Energy Technology Data Exchange (ETDEWEB)

    Bader, D C; Chin, H; Caldwell, P M

    2009-05-19

    An integrated, multi-model capability for regional climate change simulation is needed to perform original analyses to understand and prepare for the impacts of climate change on the time and space scales that are critical to California's future environmental quality and economic prosperity. Our intent was to develop a very high resolution regional simulation capability to address consequences of climate change in California to complement the global modeling capability that is supported by DOE at LLNL and other institutions to inform national and international energy policies. The California state government, through the California Energy Commission (CEC), institutionalized the State's climate change assessment process through its biennial climate change reports. The bases for these reports, however, are global climate change simulations for future scenarios designed to inform international policy negotiations, and are primarily focused on the global to continental scale impacts of increasing emissions of greenhouse gases. These simulations do not meet the needs of California public and private officials who will make major decisions in the next decade that require an understanding of climate change in California for the next thirty to fifty years and its effects on energy use, water utilization, air quality, agriculture and natural ecosystems. With the additional development of regional dynamical climate modeling capability, LLNL will be able to design and execute global simulations specifically for scenarios important to the state, then use those results to drive regional simulations of the impacts of the simulated climate change for regions as small as individual cities or watersheds. Through this project, we systematically studied the strengths and weaknesses of downscaling global model results with a regional mesoscale model to guide others, particularly university researchers, who are using the technique based on models with less complete

  4. Feasibility studie over minesøger til humanitær minerydning

    DEFF Research Database (Denmark)

    Yde, Birgitte; Jakobsen, Kaj Bjarne; Møltoft, Jørgen

    1996-01-01

    Formålet med nærværende dokument er at rapportereresultaterne af feasibility studie vedrørende mulighederne for i Danmark at udvikle og producereminesøgningsudstyr til humanitær minerydning.......Formålet med nærværende dokument er at rapportereresultaterne af feasibility studie vedrørende mulighederne for i Danmark at udvikle og producereminesøgningsudstyr til humanitær minerydning....

  5. Kundalini yoga as mutual recovery: a feasibility study including children in care and their carers

    OpenAIRE

    Perez, Elvira; Ball, Mark; Brown, Poppy; Crepaz-Keay, David; Haslam-Jones, Emily; Crawford, Paul

    2016-01-01

    This is a mixed-methods feasibility study to test whether incorporating a 20-week Kundalini yoga program into a children’s home community improves wellbeing outcomes. Feasibility was assessed through recruitment and retention rates as well as participants’ self-report perceptions on social inclusion, mental health, wellbeing and semi-structured interviews on the benefits of the study. Mutual recovery entailed that children in care (CiC), youth practitioners, and management participated togeth...

  6. Dry anaerobic digestion of organic residues on-farm - a feasibility study

    OpenAIRE

    Schäfer, Winfried; Lehto, Marja; Teye, Frederick

    2006-01-01

    Objectives The feasibility study shall answer the following questions: Are there economical and ecological advantages of on-farm dry digestion biogas plants? How the construction and operation parameters of a dry digestion biogas plant influence environment, profit, and sustainability of on-farm biogas production? The aim of the feasibility study is to provide facts and figures for decision makers in Finland to support the development of the economically and environmentally most promis...

  7. Tracking of Nuclear Production using Indigenous Species: Final LDRD Report

    Energy Technology Data Exchange (ETDEWEB)

    Alam, Todd Michael [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Dept. of Electronic and Nanostructured Materials; Alam, Mary Kathleen [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Energetics Characterization Dept.; McIntyre, Sarah K. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Dept. of Electronic and Nanostructured Materials; Volk, David [Univ. of Texas, Galveston, TX (United States). Medical Branch; Neerathilingam, Muniasamy [Univ. of Texas, Galveston, TX (United States). Medical Branch; Luxon, Bruce A. [Univ. of Texas, Galveston, TX (United States). Medical Branch; Ansari, G. A. Shakeel [Univ. of Texas, Galveston, TX (United States). Medical Branch

    2009-10-01

    Our LDRD research project sought to develop an analytical method for detection of chemicals used in nuclear materials processing. Our approach is distinctly different than current research involving hardware-based sensors. By utilizing the response of indigenous species of plants and/or animals surrounding (or within) a nuclear processing facility, we propose tracking 'suspicious molecules' relevant to nuclear materials processing. As proof of concept, we have examined TBP, tributylphosphate, used in uranium enrichment as well as plutonium extraction from spent nuclear fuels. We will compare TBP to the TPP (triphenylphosphate) analog to determine the uniqueness of the metabonomic response. We show that there is a unique metabonomic response within our animal model to TBP. The TBP signature can further be delineated from that of TPP. We have also developed unique methods of instrumental transfer for metabonomic data sets.

  8. THz transceiver characterization : LDRD project 139363 final report.

    Energy Technology Data Exchange (ETDEWEB)

    Nordquist, Christopher Daniel; Wanke, Michael Clement; Cich, Michael Joseph; Reno, John Louis; Fuller, Charles T.; Wendt, Joel Robert; Lee, Mark; Grine, Albert D.

    2009-09-01

    LDRD Project 139363 supported experiments to quantify the performance characteristics of monolithically integrated Schottky diode + quantum cascade laser (QCL) heterodyne mixers at terahertz (THz) frequencies. These integrated mixers are the first all-semiconductor THz devices to successfully incorporate a rectifying diode directly into the optical waveguide of a QCL, obviating the conventional optical coupling between a THz local oscillator and rectifier in a heterodyne mixer system. This integrated mixer was shown to function as a true heterodyne receiver of an externally received THz signal, a breakthrough which may lead to more widespread acceptance of this new THz technology paradigm. In addition, questions about QCL mode shifting in response to temperature, bias, and external feedback, and to what extent internal frequency locking can improve stability have been answered under this project.

  9. Tracking of Nuclear Production using Indigenous Species: Final LDRD Report

    Energy Technology Data Exchange (ETDEWEB)

    Alam, Todd Michael [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Dept. of Electronic and Nanostructured Materials; Alam, Mary Kathleen [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Energetics Characterization Dept.; McIntyre, Sarah K. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Dept. of Electronic and Nanostructured Materials; Volk, David [Univ. of Texas, Galveston, TX (United States). Medical Branch; Neerathilingam, Muniasamy [Univ. of Texas, Galveston, TX (United States). Medical Branch; Luxon, Bruce A. [Univ. of Texas, Galveston, TX (United States). Medical Branch; Ansari, G. A. Shakeel [Univ. of Texas, Galveston, TX (United States). Medical Branch

    2009-10-01

    Our LDRD research project sought to develop an analytical method for detection of chemicals used in nuclear materials processing. Our approach is distinctly different than current research involving hardware based sensors. By utilizing the response of indigenous species of plants and/or animals surrounding (or within) a nuclear processing facility, we propose tracking 'suspicious molecules' relevant to nuclear materials processing. As proof of concept, we have examined TBP, tributylphosphate, used in uranium enrichment as well as plutonium extraction from spent nuclear fuels. We will compare TBP to the TPP (triphenylphosphate) analog to determine the uniqueness of the metabonomic response. We show that there is a unique metabonomic response within our animal model to TBP. The TBP signature can further be delineated from that of TPP. We have also developed unique methods of instrumental transfer for metabonomic data sets.

  10. Feasibility study for siting of a deep repository within the Storuman municipality

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-01-01

    It is SKB`s task to gather a broad body of information for the siting of a deep repository for Sweden`s spent nuclear fuel and other long-lived radioactive waste. The criteria presented by SKB serve as guidelines for the siting studies. Overviews of siting factors are compiled in general siting studies of all or parts of Sweden. Feasibility studies examine the siting prospects in potentially suitable and interested municipalities. SKB plans to carry out feasibility studies in five to ten municipalities in different parts of the country. General studies and feasibility studies are primarily based on existing material. The feasibility study in Storuman is the first to be conducted. It began during the second half of 1993 with the conclusion of an agreement between the municipality and SKB. SKB has been in charge of the execution of the feasibility study. SKB has been responsible for the summary provided in a status report published in June 1994, as well as for the conclusions and evaluations in this final report. Altogether about 30 reports have been published within the framework of the feasibility study. The purpose of the various studies have been to describe, in as much detail as possible, the prospects for siting a deep repository in the municipality of Storuman, and to shed light on the possible positive and negative consequences of such a siting. The feasibility study has led to a discussion within the municipality and the region concerning the siting of a deep repository. In SKB`s opinion, this gives all those concerned ample opportunity to become acquainted with the issues and to assert their interests and present their viewpoints at an early stage. 55 refs.

  11. Feasibility study for siting of a deep repository within the Storuman municipality

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-01-01

    It is SKB`s task to gather a broad body of information for the siting of a deep repository for Sweden`s spent nuclear fuel and other long-lived radioactive waste. The criteria presented by SKB serve as guidelines for the siting studies. Overviews of siting factors are compiled in general siting studies of all or parts of Sweden. Feasibility studies examine the siting prospects in potentially suitable and interested municipalities. SKB plans to carry out feasibility studies in five to ten municipalities in different parts of the country. General studies and feasibility studies are primarily based on existing material. The feasibility study in Storuman is the first to be conducted. It began during the second half of 1993 with the conclusion of an agreement between the municipality and SKB. SKB has been in charge of the execution of the feasibility study. SKB has been responsible for the summary provided in a status report published in June 1994, as well as for the conclusions and evaluations in this final report. Altogether about 30 reports have been published within the framework of the feasibility study. The purpose of the various studies have been to describe, in as much detail as possible, the prospects for siting a deep repository in the municipality of Storuman, and to shed light on the possible positive and negative consequences of such a siting. The feasibility study has led to a discussion within the municipality and the region concerning the siting of a deep repository. In SKB`s opinion, this gives all those concerned ample opportunity to become acquainted with the issues and to assert their interests and present their viewpoints at an early stage. 55 refs.

  12. [Telescience : Feasibility studies, definition and a fair answer to the scientific brain drain].

    Science.gov (United States)

    Craemer, E M; Bassa, B; Jacobi, C; Becher, H; Meyding-Lamadé, U

    2017-02-01

    What is telescience? Is it feasible to transfer academic information with the help of telematics to educate and teach young scientists over large distances? The term telescience has so far not been defined but covers a variety of possibilities, which could be successfully implemented worldwide. This article gives examples and highlights the feasibility analysis of telescience. We have carried out feasibility analyses for neurological functional diagnostics, an epidemiological cross-sectional study as well as a laboratory study for detection of thrombocyte function during dengue fever with the help of telemedicine. The basis for all these projects was a telemedical transcontinental cooperation over a distance of 12,000 km. All performed studies demonstrated the feasibility. With the help of telematics the laboratory techniques, planning, conduction and interpretation of results as well as publication skills can be transferred. Telescience is feasible. Our studies showed that telescience is a very promising option to transfer knowledge, which will help to enable professional expertise to be transferred directly to the region/country without a brain drain. All too often young motivated scientists are enticed to move to well-known institutions, which involves the danger of a brain drain. Brain drain can be avoided in favor of local implementation of scientific projects. Our results illustrate that it is feasible to educate and guide scientists with the help of telematics infrastructures.

  13. FEASIBILITY STUDIES FOR THE PANDA EXPERIMENT AT FAIR

    NARCIS (Netherlands)

    Biegun, A.

    PANDA, the detector to study AntiProton ANnihilations at DArmstadt, will be installed at the future international Facility for Anti-proton and Ion Research (FAIR) in Darmstadt, Germany. The PANDA physics program is oriented towards the studies of the strong interaction and hadron structure performed

  14. FEASIBILITY STUDIES FOR THE PANDA EXPERIMENT AT FAIR

    NARCIS (Netherlands)

    Biegun, A.

    2010-01-01

    PANDA, the detector to study AntiProton ANnihilations at DArmstadt, will be installed at the future international Facility for Anti-proton and Ion Research (FAIR) in Darmstadt, Germany. The PANDA physics program is oriented towards the studies of the strong interaction and hadron structure performed

  15. ASIPP remotely operated vehicle design (ROV) and feasibility study

    Science.gov (United States)

    Zhang, Tao; Zhang, Xuanchen; Wang, Lei; Pan, Hongtao; Zheng, Lei; Cheng, Yong; Wu, Jing

    2017-06-01

    The ROV is an important device for studying the underwater world. Thus, the ASIPP ROV is designed to meet this demand by ASIPP RH team. Through adding the wireless vision module, the performance of the robot is promoted in motion control, image collecting and so on. The rationality of the design and the effectiveness of the controller are validated by simulation and experimental study.

  16. 43 CFR 404.36 - Will Reclamation reimburse me for the cost of an appraisal investigation or a feasibility study...

    Science.gov (United States)

    2010-10-01

    ... of an appraisal investigation or a feasibility study that was not completed under § 404.11(a) or (b... Reclamation reimburse me for the cost of an appraisal investigation or a feasibility study that was not... appraisal investigations and feasibility studies that are completed under the program pursuant to §...

  17. Akutan, Alaska bottomfish harbor study feasibility stage: Planning aid report

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Six alternatives are presently being studied by the Corps of Engineers, in conjunction with facilitating construction of a bottomfish harbor at Akutan Harbor located...

  18. Hailstone Reservoir Feasibility Study : Hailstone National Wildlife Refuge

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This study covers the water quality in the Hailstone Reservoir that has been severely impacted by up-gradient saline seeps that contain trace elements. Due to the...

  19. Feasibility Study for Vitrification of Sodium-Bearing Waste

    Energy Technology Data Exchange (ETDEWEB)

    J. J. Quigley; B. D. Raivo; S. O. Bates; S. M. Berry; D. N. Nishioka; P. J. Bunnell

    2000-09-01

    Treatment of sodium-bearing waste (SBW) at the Idaho Nuclear Technology and Engineering Center (INTEC) within the Idaho National Engineering and Environmental Laboratory is mandated under a Settlement Agreement between the Department of Energy and the State of Idaho. One of the requirements of the Settlement Agreement is the complete calcination (i.e., treatment) of all SBW by December 31, 2012. One of the proposed options for treatment of SBW is vitrification. This study will examine the viability of SBW vitrification. This study describes the process and facilities to treat the SBW, from beginning waste input from INTEC Tank Farm to the final waste forms. Schedules and cost estimates for construction and operation of a Vitrification Facility are included. The study includes a facility layout with drawings, process description and flow diagrams, and preliminary equipment requirements and layouts.

  20. The interpretation of remote sensing, a feasibility study.

    NARCIS (Netherlands)

    den Dulk, J.A.

    1989-01-01

    This thesis describes research done to ascertain the possibilities and limitations of the use of remote sensing observations for agriculture. The topic is defined in Chapter 1. In Chapter 2 the possible applicability of certain existing models for this study is examined. Three models are developed f

  1. Feasibility study of algae-based Carbon Dioxide capture

    Science.gov (United States)

    SUMMARY: The biomass of microalgae contains approximately 50% carbon, which is commonly obtained from the atmosphere, but can also be taken from commercial sources that produce CO2, such as coal-fired power plants. A study of operational demonstration projects is being undertak...

  2. Buffalo Harbor Study. Preliminary Feasibility Report. Volume I. Main Report.

    Science.gov (United States)

    1983-04-01

    the Buffalo Ornithological Society . Although these groups are not planning agencies, they represent an important trend in land use planning. The groups...Buffalo Historical Society , 1902. Wilson , Carroll L. Coal: Bridge to the Future, Report of the World Coal Study. Cambridge: Ballinger Publishing Company... Wilson , 1980) PLANNING CONSTRAINTS Federal policy on multiobjective planning, derived from both legislative and executive authorities, establishes and

  3. Feasibility Study for an Advanced Lighted Aid to Navigation.

    Science.gov (United States)

    1981-09-01

    This network, comprised of some 15,000 fixed and moored (buoy) aids, supplies position information to mariners via visual markers and flashing lights...and moored (buoy) aids, supplies position information to mari- ners via visual markers and flashing lights. The Coast Guard is studying the use of

  4. Feasibility study of algae-based CO2 capture

    Science.gov (United States)

    The biomass of microalgae contains approximately 50% carbon, which is commonly obtained from the atmosphere, but can also be taken from commercial sources that produce CO2, such as coal-fired power plants. A study of operational demonstration projects is being undertaken to eval...

  5. Computer-Based Information Services in Medicine: A Feasibility Study.

    Science.gov (United States)

    Cox, P. H.; And Others

    The objectives of this study were to examine the need and potential demand for computer-based information services in the University of Otago medical libraries, to evaluate the various databases of interest, and to recommend the best means of access to such services. Data were collected through user and library surveys, an extensive literature…

  6. The interpretation of remote sensing : a feasibility study

    NARCIS (Netherlands)

    Dulk, den J.A.

    1989-01-01

    This thesis describes research done to ascertain the possibilities and limitations of the use of remote sensing observations for agriculture. The topic is defined in Chapter 1. In Chapter 2 the possible applicability of certain existing models for this study is examined. Three models are de

  7. Feasibility study of algae-based CO2 capture

    Science.gov (United States)

    The biomass of microalgae contains approximately 50% carbon, which is commonly obtained from the atmosphere, but can also be taken from commercial sources that produce CO2, such as coal-fired power plants. A study of operational demonstration projects is being undertaken to eval...

  8. Tool sharing in an FMS — a feasibility study

    NARCIS (Netherlands)

    Gaalman, G.J.; Nawijn, W.M.; Platzer, L.W.

    1987-01-01

    In a flexible manufacturing system, cylinder blocks and heads are processed in batches by four machine in line. Each part is fully processed on one machine only. During batch production the tool magazines contain the same set of tools. This paper reports on a simulation study to investigate the

  9. Feasibility study of algae-based Carbon Dioxide capture

    Science.gov (United States)

    SUMMARY: The biomass of microalgae contains approximately 50% carbon, which is commonly obtained from the atmosphere, but can also be taken from commercial sources that produce CO2, such as coal-fired power plants. A study of operational demonstration projects is being undertak...

  10. Insect-Based Vision for Autonomous Vehicles: A Feasibility Study

    Science.gov (United States)

    Srinivasan, Mandyam V.

    1999-01-01

    The aims of the project were to use a high-speed digital video camera to pursue two questions: (1) To explore the influence of temporal imaging constraints on the performance of vision systems for autonomous mobile robots; (2) To study the fine structure of insect flight trajectories in order to better understand the characteristics of flight control, orientation and navigation.

  11. Space shuttle/food system study. Package feasibility study, modifications 3S, 4C and 5S

    Science.gov (United States)

    1974-01-01

    An optimum feeding system for the space shuttle was presented. This system consisted of all rehydratable type foods which were enclosed in a 4 in. x 4 in. x 1 in. flexible package. A feasibility follow-on study was conducted, and two acceptable, feasible prototypes for this package are described.

  12. Feasibility Study of Hydrogen Production at Existing Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Stephen Schey

    2009-07-01

    Cooperative Agreement DE-FC07-06ID14788 was executed between the U.S. Department of Energy, Electric Transportation Applications, and Idaho National Laboratory to investigate the economics of producing hydrogen by electrolysis using electricity generated by nuclear power. The work under this agreement is divided into the following four tasks: Task 1 – Produce Data and Analyses Task 2 – Economic Analysis of Large-Scale Alkaline Electrolysis Task 3 – Commercial-Scale Hydrogen Production Task 4 – Disseminate Data and Analyses. Reports exist on the prospect that utility companies may benefit from having the option to produce electricity or produce hydrogen, depending on market conditions for both. This study advances that discussion in the affirmative by providing data and suggesting further areas of study. While some reports have identified issues related to licensing hydrogen plants with nuclear plants, this study provides more specifics and could be a resource guide for further study and clarifications. At the same time, this report identifies other area of risks and uncertainties associated with hydrogen production on this scale. Suggestions for further study in some of these topics, including water availability, are included in the report. The goals and objectives of the original project description have been met. Lack of industry design for proton exchange membrane electrolysis hydrogen production facilities of this magnitude was a roadblock for a significant period. However, recent design breakthroughs have made costing this facility much more accurate. In fact, the new design information on proton exchange membrane electrolyzers scaled to the 1 kg of hydrogen per second electrolyzer reduced the model costs from $500 to $100 million. Task 1 was delayed when the original electrolyzer failed at the end of its economic life. However, additional valuable information was obtained when the new electrolyzer was installed. Products developed during this study

  13. FEASIBILITY STUDY II OF A MUON BASED NEUTRINO SOURCE.

    Energy Technology Data Exchange (ETDEWEB)

    GALLARDO,J.C.; OZAKI,S.; PALMER,R.B.; ZISMAN,M.

    2001-06-30

    The concept of using a muon storage ring to provide a well characterized beam of muon and electron neutrinos (a Neutrino Factory) has been under study for a number of years now at various laboratories throughout the world. The physics program of a Neutrino Factoryis focused on the relatively unexplored neutrino sector. In conjunction with a detector located a suitable distance from the neutrino source, the facility would make valuable contributions to the study of neutrino masses and lepton mixing. A Neutrino Factory is expected to improve the measurement accuracy of sin{sup 2}(2{theta}{sub 23}) and {Delta}m{sup 2}{sub 32} and provide measurements of sin{sup 2}(2{theta}{sub 13}) and the sign of {Delta}m{sup 2}{sub 32}. It may also be able to measure CP violation in the lepton sector.

  14. Feasibility Study on RI Application to a Biochip

    Energy Technology Data Exchange (ETDEWEB)

    Park, Sang Hyun; Gwon, Hui Jeong; Choi, Sang Mu; Yang, Seung Dae; Kim, Swang Wook; Shin, Jun Hwa; Ko, Kyong Cheol; Jang, Seung Ho

    2007-07-15

    Microarrays have recently become a precious research tool for proteomics and clinical investigation. Their applications to the diagnosis of a disease have emerged as a significant promise for medical advances. In this study, we report on an efficient strategy for the detection of phosphorylation of a substrate catalysed by kinase, using radioisotope detection technique for a protein bio chip. This technique does not employ the use of the blocking step which is commonly used in conventional methods to prevent non-specific binding. It was found that the usage of a radioisotope detection technique has the advantages of being highly sensitive and time saving when compared to other conventional methods. The results can be applied when using radioisotope detection technique to develop bio chips to determine the activity of a protein kinase. Further, it can be a useful tool for a high throughput screening and for studying protein-protein interactions.

  15. Integrating LMINET with TAAM and SIMMOD: A Feasibility Study

    Science.gov (United States)

    Long, Dou; Stouffer-Coston, Virginia; Kostiuk, Peter; Kula, Richard; Yackovetsky, Robert (Technical Monitor)

    2001-01-01

    LMINET is a queuing network air traffic simulation model implemented at 64 large airports and the entire National Airspace System in the United States. TAAM and SIMMOD are two widely used air traffic event-driven simulation models mostly for airports. Based on our proposed Progressive Augmented window approach, TAAM and SIMMOD are integrated with LMINET though flight schedules. In the integration, the flight schedules are modified through the flight delays reported by the other models. The benefit to the local simulation study is to let TAAM or SIMMOD take the modified schedule from LMINET, which takes into account of the air traffic congestion and flight delays at the national network level. We demonstrate the value of the integrated models by the case studies at Chicago O'Hare International Airport and Washington Dulles International Airport. Details of the integration are reported and future work for a full-blown integration is identified.

  16. Feasibility and marketing studies of health sciences librarianship education programs.

    Science.gov (United States)

    Lipscomb, C E; Moran, B B; Jenkins, C G; Cogdill, K W; Friedman, C P; Gollop, C J; Moore, M E; Morrison, M L; Tibbo, H R; Wildemuth, B M

    1999-01-01

    The University of North Carolina at Chapel Hill evaluated five curricular models designed to improve education for health sciences librarianship. Three of the models enhanced existing degree and certificate programs, and two were new programs for working information professionals. Models were developed with input from experts and a Delphi study; the marketability of the models was tested through surveys of potential students and employers; and recommendations were made as a guide to implementation. The results demonstrated a demand for more specialized curricula and for retraining opportunities. Marketing data showed a strong interest from potential students in a specialized master's degree, and mid-career professionals indicated an interest in postmaster's programs that provided the ability to maintain employment. The study pointed to the opportunity for a center of excellence in health sciences information education to enable health sciences librarians to respond to their evolving roles.

  17. Feasibility Study: Ductless Hydronic Distribution Systems with Fan Coil Delivery

    Energy Technology Data Exchange (ETDEWEB)

    Springer, D.; Dakin, B.; Backman, C.

    2012-07-01

    The primary objectives of this study are to estimate potential energy savings relative to conventional ducted air distribution, and to identify equipment requirements, costs, and barriers with a focus on ductless hydronic delivery systems that utilize water-to-air terminal units in each zone. Results indicate that annual heating and cooling energy use can be reduced by up to 27% assuming replacement of the conventional 13 SEER heat pump and coil with a similarly rated air-to-water heat pump.

  18. Feasibility Studies on Underwater Laser Surface Hardening Process

    OpenAIRE

    Biao Jin; Min Li; TaeWoo Hwang; YoungHoon Moon

    2015-01-01

    Laser surface hardening process is a very promising hardening method for ferrous and nonferrous alloys where transformations occur during cooling after laser melting in the solid state. This study experimentally characterizes laser surface hardening of tool steel in both water and air. For the underwater operation, laser surface scanning is performed over the tool steel surface which is immersed in water. The laser surface hardening tests are performed with a maximum 200 W fiber laser with a ...

  19. Dental optical tomography with upconversion nanoparticles—a feasibility study

    Science.gov (United States)

    Long, Feixiao; Intes, Xavier

    2017-06-01

    Upconversion nanoparticles (UCNPs) have the unique ability to emit multiple colors upon excitation by near-infrared (NIR) light. Herein, we investigate the potential use of UCNPs as contrast agents for dental optical tomography, with a focus on monitoring the status of fillings after dental restoration. The potential of performing tomographic imaging using UCNP emission of visible or NIR light is established. This in silico and ex vivo study paves the way toward employing UCNPs as theranostic agents for dental applications.

  20. Feasibility study of archaeological structures scanning by muon tomography

    Energy Technology Data Exchange (ETDEWEB)

    Gómez, H.; Katsanevas, S.; Tonazzo, A. [Laboratoire Astroparticule et Cosmologie (APC) - Université Paris 7. Paris (France); Carloganu, C.; Niess, V. [Laboratoire de Physique Corpusculaire (LPC) - Université Blaise Pascal. Clermont - Ferrand (France); Gibert, D. [Géosciences Rennes - Université de Rennes 1. Rennes (France); Marteau, J. [Institute de Physique Nucléaire de Lyon (IPNL) - Université de Lyon (UCBL). Lyon (France)

    2015-08-17

    One of the main concerns in archaeology is to find of a method to study precisely archaeological structures in the least invasive way possible to avoid damage. The requirement of preserving the structures integrity prevents, in the case of pyramids or tumuli, the study of any internal structure (halls or tombs) which are not reachable by existing corridors. One non-invasive method is the muon tomography. By placing a detector which allows to register the muon direction after the structure, it is possible to have an idea of its composition based on the attenuation of the muon flux, which depends on the material length and density that muons have crossed. This technique, alone or together with other exploration techniques as seismic tomography or electrical resistivity tomography, can provide useful information about the internal structure of the archaeological form that can not be obtained by conventional archaeological methods. In this work, the time measurement necessary to obtain a significant result about the composition of an archaeological structure is estimated. To do that, a Monte Carlo simulation framework based on the MUSIC software, properly tuned for this study, has been developed. The particular case of the Kastas Amfipoli Macedonian tumulus has been considered to perform the simulations.

  1. Feasibility of multi-sector policy measures that create activity-friendly environments for children: results of a Delphi study

    Directory of Open Access Journals (Sweden)

    Aarts Marie-Jeanne

    2011-12-01

    Full Text Available Abstract Background Although multi-sector policy is a promising strategy to create environments that stimulate physical activity among children, little is known about the feasibility of such a multi-sector policy approach. The aims of this study were: to identify a set of tangible (multi-sector policy measures at the local level that address environmental characteristics related to physical activity among children; and to assess the feasibility of these measures, as perceived by local policy makers. Methods In four Dutch municipalities, a Delphi study was conducted among local policy makers of different policy sectors (public health, sports, youth and education, spatial planning/public space, traffic and transportation, and safety. In the first Delphi round, respondents generated a list of possible policy measures addressing three environmental correlates of physical activity among children (social cohesion, accessibility of facilities, and traffic safety. In the second Delphi round, policy makers weighted different feasibility aspects (political feasibility, cultural/community acceptability, technical feasibility, cost feasibility, and legal feasibility and assessed the feasibility of the policy measures derived from the first round. The third Delphi round was aimed at reaching consensus by feedback of group results. Finally, one overall feasibility score was calculated for each policy measure. Results Cultural/community acceptability, political feasibility, and cost feasibility were considered most important feasibility aspects. The Delphi studies yielded 16 feasible policy measures aimed at physical and social environmental correlates of physical activity among children. Less drastic policy measures were considered more feasible, whereas environmental policy measures were considered less feasible. Conclusions This study showed that the Delphi technique can be a useful tool in reaching consensus about feasible multi-sector policy measures. The

  2. Feasibility of multi-sector policy measures that create activity-friendly environments for children: results of a Delphi study.

    Science.gov (United States)

    Aarts, Marie-Jeanne; Schuit, Albertine J; van de Goor, Ien Am; van Oers, Hans Am

    2011-12-15

    Although multi-sector policy is a promising strategy to create environments that stimulate physical activity among children, little is known about the feasibility of such a multi-sector policy approach. The aims of this study were: to identify a set of tangible (multi-sector) policy measures at the local level that address environmental characteristics related to physical activity among children; and to assess the feasibility of these measures, as perceived by local policy makers. In four Dutch municipalities, a Delphi study was conducted among local policy makers of different policy sectors (public health, sports, youth and education, spatial planning/public space, traffic and transportation, and safety). In the first Delphi round, respondents generated a list of possible policy measures addressing three environmental correlates of physical activity among children (social cohesion, accessibility of facilities, and traffic safety). In the second Delphi round, policy makers weighted different feasibility aspects (political feasibility, cultural/community acceptability, technical feasibility, cost feasibility, and legal feasibility) and assessed the feasibility of the policy measures derived from the first round. The third Delphi round was aimed at reaching consensus by feedback of group results. Finally, one overall feasibility score was calculated for each policy measure. Cultural/community acceptability, political feasibility, and cost feasibility were considered most important feasibility aspects. The Delphi studies yielded 16 feasible policy measures aimed at physical and social environmental correlates of physical activity among children. Less drastic policy measures were considered more feasible, whereas environmental policy measures were considered less feasible. This study showed that the Delphi technique can be a useful tool in reaching consensus about feasible multi-sector policy measures. The study yielded several feasible policy measures aimed at

  3. A robotic wheelchair trainer: design overview and a feasibility study

    Science.gov (United States)

    2010-01-01

    Background Experiencing independent mobility is important for children with a severe movement disability, but learning to drive a powered wheelchair can be labor intensive, requiring hand-over-hand assistance from a skilled therapist. Methods To improve accessibility to training, we developed a robotic wheelchair trainer that steers itself along a course marked by a line on the floor using computer vision, haptically guiding the driver's hand in appropriate steering motions using a force feedback joystick, as the driver tries to catch a mobile robot in a game of "robot tag". This paper provides a detailed design description of the computer vision and control system. In addition, we present data from a pilot study in which we used the chair to teach children without motor impairment aged 4-9 (n = 22) to drive the wheelchair in a single training session, in order to verify that the wheelchair could enable learning by the non-impaired motor system, and to establish normative values of learning rates. Results and Discussion Training with haptic guidance from the robotic wheelchair trainer improved the steering ability of children without motor impairment significantly more than training without guidance. We also report the results of a case study with one 8-year-old child with a severe motor impairment due to cerebral palsy, who replicated the single-session training protocol that the non-disabled children participated in. This child also improved steering ability after training with guidance from the joystick by an amount even greater than the children without motor impairment. Conclusions The system not only provided a safe, fun context for automating driver's training, but also enhanced motor learning by the non-impaired motor system, presumably by demonstrating through intuitive movement and force of the joystick itself exemplary control to follow the course. The case study indicates that a child with a motor system impaired by CP can also gain a short-term benefit

  4. White phosphorus pits focused feasibility study final July 2007.

    Energy Technology Data Exchange (ETDEWEB)

    Davis, B.; Martino, L.

    2007-08-21

    The White Phosphorus Burning Pits (WPP) Area of Concern (AOC) is a site of about 5.5 acres (2.2 ha) located in the J-Field Study Area, in the Edgewood Area of Aberdeen Proving Ground (APG), Maryland (Figure 1.1). Considerable information about the WPP exists as a result of efforts to characterize the hazards associated with J-Field. Contamination in the J-Field Study Area was first detected during an environmental survey of the APG Edgewood Area conducted in 1977 and 1978 (Nemeth et al. 1983) by the U.S. Army Toxic and Hazardous Materials Agency (USATHAMA; predecessor to the U.S. Army Environmental Center). As part of a subsequent USATHAMA environmental survey, 11 wells were installed and sampled at J-Field (three of them at the WPP) (Nemeth 1989). Contamination was also detected in 1983 during a munitions disposal survey conducted by Princeton Aqua Science (1984). The Princeton Aqua Science investigation involved installing and sampling nine wells (four at the WPP) and collecting and analyzing surficial and deep composite soil samples (including samples from the WPP area). In 1986, the U.S. Environmental Protection Agency (EPA) issued a Resource Conservation and Recovery Act (RCRA) Permit (MD3-21-002-1355) requiring a post-wide RCRA Facility Assessment (RFA) and a hydrogeologic assessment of J-Field. In 1987, the U.S. Geological Survey (USGS) began a two-phase hydrogeologic assessment in which data were collected to model groundwater flow at J-Field. Soil-gas investigations were conducted, several well clusters were installed (four at the WPP), a groundwater flow model was developed, and groundwater and surface water monitoring programs were established that continue today. The results of the USGS study were published by Hughes (1993).

  5. A robotic wheelchair trainer: design overview and a feasibility study

    Directory of Open Access Journals (Sweden)

    Marchal-Crespo Laura

    2010-08-01

    Full Text Available Abstract Background Experiencing independent mobility is important for children with a severe movement disability, but learning to drive a powered wheelchair can be labor intensive, requiring hand-over-hand assistance from a skilled therapist. Methods To improve accessibility to training, we developed a robotic wheelchair trainer that steers itself along a course marked by a line on the floor using computer vision, haptically guiding the driver's hand in appropriate steering motions using a force feedback joystick, as the driver tries to catch a mobile robot in a game of "robot tag". This paper provides a detailed design description of the computer vision and control system. In addition, we present data from a pilot study in which we used the chair to teach children without motor impairment aged 4-9 (n = 22 to drive the wheelchair in a single training session, in order to verify that the wheelchair could enable learning by the non-impaired motor system, and to establish normative values of learning rates. Results and Discussion Training with haptic guidance from the robotic wheelchair trainer improved the steering ability of children without motor impairment significantly more than training without guidance. We also report the results of a case study with one 8-year-old child with a severe motor impairment due to cerebral palsy, who replicated the single-session training protocol that the non-disabled children participated in. This child also improved steering ability after training with guidance from the joystick by an amount even greater than the children without motor impairment. Conclusions The system not only provided a safe, fun context for automating driver's training, but also enhanced motor learning by the non-impaired motor system, presumably by demonstrating through intuitive movement and force of the joystick itself exemplary control to follow the course. The case study indicates that a child with a motor system impaired by CP can

  6. Opto-acoustic image fusion technology for diagnostic breast imaging in a feasibility study

    Science.gov (United States)

    Zalev, Jason; Clingman, Bryan; Herzog, Don; Miller, Tom; Ulissey, Michael; Stavros, A. T.; Oraevsky, Alexander; Lavin, Philip; Kist, Kenneth; Dornbluth, N. C.; Otto, Pamela

    2015-03-01

    Functional opto-acoustic (OA) imaging was fused with gray-scale ultrasound acquired using a specialized duplex handheld probe. Feasibility Study findings indicated the potential to more accurately characterize breast masses for cancer than conventional diagnostic ultrasound (CDU). The Feasibility Study included OA imagery of 74 breast masses that were collected using the investigational Imagio® breast imaging system. Superior specificity and equal sensitivity to CDU was demonstrated, suggesting that OA fusion imaging may potentially obviate the need for negative biopsies without missing cancers in a certain percentage of breast masses. Preliminary results from a 100 subject Pilot Study are also discussed. A larger Pivotal Study (n=2,097 subjects) is underway to confirm the Feasibility Study and Pilot Study findings.

  7. Development of a radiochemical sensor. Part I: Feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Tarancon, A. [Departament de Quimica Analitica, Facultat de Quimica, Universitat de Barcelona, C/ Marti Franques 1, 08028 Barcelona (Spain); Garcia, J.F. [Departament de Pintura, Facultat de Belles Arts, Universitat de Barcelona, C/ Pau Gargallo 4, 08028 Barcelona (Spain)]. E-mail: jfgarcia@apolo.qui.ub.es; Rauret, G. [Departament de Quimica Analitica, Facultat de Quimica, Universitat de Barcelona, C/ Marti Franques 1, 08028 Barcelona (Spain)

    2005-05-04

    The evolution of nuclear activities and criteria for radiation protection have led to a continuous increase in measures to monitor and control the environment and therefore in the number of determinations required for such purposes. Classical analytical procedures are time-consuming, labor-intense and generate a large amount of waste. The alternative use of sensors for such determinations has seen very limited development. The present study focuses on the evaluation of the behavior of a prototype radiochemical sensor for liquid effluents. The sensor is based on a receptor made of a plastic scintillator and is capable of continuous, on-time and accurate remote quantification of the activity of alpha, beta and beta-gamma emitters. Low-level active solutions of {sup 90}Sr/{sup 90}Y, {sup 238}Pu, {sup 134}Cs and {sup 60}Co in matrices of groundwater, seawater and drinking water were quantified with prediction errors lower than 10% in most cases. The study also yields information about light generation and transmission and transductor configuration that will be useful in the design of future versions of this sensor.

  8. Feasibility study of multipoint based laser alignment system for CLIC

    CERN Document Server

    Stern, G; Mainaud-Durand, H; Piedigrossi, D; Geiger, A

    2012-01-01

    CLIC (Compact LInear Collider) is a study for a future electron-positron collider that would allow physicists to explore a new energy region beyond the capabilities oftoday’s particle accelerators. Alignment is one of the major challenges within the CLIC study in order to achieve the high requirement of a multi-TeV center of mass colliding beam energy range (nominal 3 TeV). To reach this energy in a realistic and cost efficient scenario all accelerator components have to be aligned with an accuracy of 10 μm over a sliding window of 200 m. The demand for a straight line reference is so far based on stretched wires coupled with Wire Positioning Sensors (WPS). These solutions are currently further developed inorder to reduce the drawbacks which are mainly given by their costs and difficult implementation. However, it should be validated through inter-comparison with a solution ideally based on a different physical principle. Therefore, a new metrological approach is proposed using a laser beam as straight lin...

  9. Solar Feasibility Study May 2013 - San Carlos Apache Tribe

    Energy Technology Data Exchange (ETDEWEB)

    Rapp, Jim [Parametrix; Duncan, Ken [San Carlos Apache Tribe; Albert, Steve [Parametrix

    2013-05-01

    The San Carlos Apache Tribe (Tribe) in the interests of strengthening tribal sovereignty, becoming more energy self-sufficient, and providing improved services and economic opportunities to tribal members and San Carlos Apache Reservation (Reservation) residents and businesses, has explored a variety of options for renewable energy development. The development of renewable energy technologies and generation is consistent with the Tribe’s 2011 Strategic Plan. This Study assessed the possibilities for both commercial-scale and community-scale solar development within the southwestern portions of the Reservation around the communities of San Carlos, Peridot, and Cutter, and in the southeastern Reservation around the community of Bylas. Based on the lack of any commercial-scale electric power transmission between the Reservation and the regional transmission grid, Phase 2 of this Study greatly expanded consideration of community-scale options. Three smaller sites (Point of Pines, Dudleyville/Winkleman, and Seneca Lake) were also evaluated for community-scale solar potential. Three building complexes were identified within the Reservation where the development of site-specific facility-scale solar power would be the most beneficial and cost-effective: Apache Gold Casino/Resort, Tribal College/Skill Center, and the Dudleyville (Winkleman) Casino.

  10. Hycom Pre - Feasibility study. Final report[Hydrogen communities

    Energy Technology Data Exchange (ETDEWEB)

    Lacobazzi, A.; Mario, F di [ENEA, (Italy); Hasenauer, U. [Fraunhofer IS, (Germany); Joergensen, B.H.; Bromand Noergaard, P. [Risoe National Lab., (Denmark)

    2005-07-01

    The Quick-start Programme of the European Union Initiative for Growth identifies the hydrogen economy as one of the key areas for investment in the medium term (2004-2015). In this context the HyCOM (Hydrogen Communities) programme has been initiated. The main goal of this programme is the creation of a limited number of strategically sited stand-alone hydrogen communities producing hydrogen from various primary sources (mostly renewables) and using it for heat and electricity production and as fuel for vehicles. This report looks at the establishment of such hydrogen communities, analysing the main technical, economic, social, and environmental aspects as well as financial and regulatory barriers associated with the creation and operation of hydrogen communities. It also proposes a number of concepts for Hydrogen Communities and criteria with which a Hydrogen Community should be evaluated. The study is not in any way intended to be prescriptive. (ln)

  11. Feasibility studies for nucleon structure measurements with PANDA

    Directory of Open Access Journals (Sweden)

    Atomssa Ermias

    2014-01-01

    Full Text Available The study of nucleon structure is one of the main physics goals of PANDA to be built at the FAIR accelerator complex. The excellent particle identification performance of the PANDA detector will enable measurements of exclusive channels p̄ p → e+e− and p̄ p → π0 J/ψ → π0e+e− to extract the electromagnetic form factors of protons and π-nucleon Transition Distribution Amplitudes (π-N TDAs. After a brief description of the PANDA apparatus and a method to handle momentum resolution degradation due to Bremsstrahlung, the physics of π-N TDAs is discussed. An estimate for the expected signal to background ratio for p̄ p → π0 J/ψ → π0e+e− that takes into account the main background source is given.

  12. Feasibility studies for nucleon structure measurements with PANDA

    Science.gov (United States)

    Atomssa, Ermias; Ma, Binsong

    2014-11-01

    The study of nucleon structure is one of the main physics goals of PANDA to be built at the FAIR accelerator complex. The excellent particle identification performance of the PANDA detector will enable measurements of exclusive channels p¯ p → e+e- and p¯ p → π0 J/ψ → π0e+e- to extract the electromagnetic form factors of protons and π-nucleon Transition Distribution Amplitudes (π-N TDAs). After a brief description of the PANDA apparatus and a method to handle momentum resolution degradation due to Bremsstrahlung, the physics of π-N TDAs is discussed. An estimate for the expected signal to background ratio for p¯ p → π0 J/ψ → π0e+e- that takes into account the main background source is given.

  13. Feasibility study for banking loan using association rule mining classifier

    Directory of Open Access Journals (Sweden)

    Agus Sasmito Aribowo

    2015-03-01

    Full Text Available The problem of bad loans in the koperasi can be reduced if the koperasi can detect whether member can complete the mortgage debt or decline. The method used for identify characteristic patterns of prospective lenders in this study, called Association Rule Mining Classifier. Pattern of credit member will be converted into knowledge and used to classify other creditors. Classification process would separate creditors into two groups: good credit and bad credit groups. Research using prototyping for implementing the design into an application using programming language and development tool. The process of association rule mining using Weighted Itemset Tidset (WIT–tree methods. The results shown that the method can predict the prospective customer credit. Training data set using 120 customers who already know their credit history. Data test used 61 customers who apply for credit. The results concluded that 42 customers will be paying off their loans and 19 clients are decline

  14. Boundary-layer control by electric fields A feasibility study

    CERN Document Server

    Mendes, R V

    1998-01-01

    A problem of great concern in aviation and submarine propulsion is the control of the boundary layer and, in particular, the methods to extend the laminar region as a means to decrease noise and fuel consumption. In this paper we study the flow of air along an airfoil when a layer of ionized gas and a longitudinal electric field are created in the boundary layer region. By deriving scaling solutions and more accurate numerical solutions we discuss the possibility of achieving significant boundary layer control for realistic physical parameters. Practical design formulas and criteria are obtained. We also discuss the perspectives for active control of the laminar-to-turbulent transition fluctuations by electromagnetic field modulation.

  15. Feasibility of AmbulanCe-Based Telemedicine (FACT) Study : Safety, Feasibility and Reliability of Third Generation Ambulance Telemedicine

    NARCIS (Netherlands)

    Yperzeele, Laetitia; Van Hooff, Robbert-Jan; De Smedt, Ann; Espinoza, Alexis Valenzuela; Van Dyck, Rita; Van de Casseye, Rohny; Convents, Andre; Hubloue, Ives; Lauwaert, Door; De Keyser, Jacques; Brouns, Raf

    2014-01-01

    Background: Telemedicine is currently mainly applied as an in-hospital service, but this technology also holds potential to improve emergency care in the prehospital arena. We report on the safety, feasibility and reliability of in-ambulance teleconsultation using a telemedicine system of the third

  16. Feasibility Study of a Hand Guided Robotic Drill for Cochleostomy

    Directory of Open Access Journals (Sweden)

    Peter Brett

    2014-01-01

    Full Text Available The concept of a hand guided robotic drill has been inspired by an automated, arm supported robotic drill recently applied in clinical practice to produce cochleostomies without penetrating the endosteum ready for inserting cochlear electrodes. The smart tactile sensing scheme within the drill enables precise control of the state of interaction between tissues and tools in real-time. This paper reports development studies of the hand guided robotic drill where the same consistent outcomes, augmentation of surgeon control and skill, and similar reduction of induced disturbances on the hearing organ are achieved. The device operates with differing presentation of tissues resulting from variation in anatomy and demonstrates the ability to control or avoid penetration of tissue layers as required and to respond to intended rather than involuntary motion of the surgeon operator. The advantage of hand guided over an arm supported system is that it offers flexibility in adjusting the drilling trajectory. This can be important to initiate cutting on a hard convex tissue surface without slipping and then to proceed on the desired trajectory after cutting has commenced. The results for trials on phantoms show that drill unit compliance is an important factor in the design.

  17. Feasibility study of effect of ultrasound on water chestnuts.

    Science.gov (United States)

    Wu, Junru; Wu, Meiyin

    2006-04-01

    Water chestnut (Trapa natans L.), an annual aquatic plant with floating leaves was first introduced into North America in 1874. Since then, wild populations have quickly become established in many locations within Northeastern USA. Due to its detrimental effects on the overall health of aquatic ecosystems, millions of dollars have been spent to control the water chestnut infestations in the North America through mechanical harvesting and manual removal, with limited success. The potential for continued expansion of the infestations demonstrates an urgent need for an effective control method. This study examined the potential of ultrasound application as an alternative control strategy for water chestnut management. Various frequencies and amplitudes of ultrasound generated by submerged transducers were applied directly to water chestnuts harvested from Lake Champlain. Substantial damages on water chestnut cells as well as penetrated petitoles were observed at the following tested frequencies of ultrasound, 20 kHz, 187 kHz, 469 kHz, 519 kHz and 2.34 MHz. Among them, 20 kHz ultrasound of 1.9 MPa acoustic pressure amplitude demonstrated the most significant damages within 10 s of ultrasound exposure. The treated plants started to die within 72 h and the mortality rate of water chestnut plants treated with the ultrasound application was 100%.

  18. Reduction of persistent organic pollutants in fishmeal: a feasibility study.

    Science.gov (United States)

    Oterhals, Age; Nygård, Einar

    2008-03-26

    The dioxin, dioxin-like polychlorinated biphenyl (DL-PCB), fat, and dry matter partitioning during fishmeal production have been studied in pilot scale. Most of the dry matter and lipid content in the fishmeal could be ascribed to the press cake intermediate product. Dioxins and DL-PCBs are fat-soluble compounds, and the process partitioning is reflected by the fat partitioning data. Enzyme and heat treatment of the press cake and stickwater concentrate did not improve fat separation. Soybean oil extraction of the press cake reduced the dioxin and DL-PCB content by 97%. Less exchange of fatty acids was observed (56-72%). Combined with fat separation of the stickwater concentrate, the applied process conditions were able to give a fishmeal decontamination rate higher than hexane and isopropanol extraction of the fishmeal. Quantification of fat content based on chloroform/methanol extraction was found to be the best protocol to estimate fat partitioning and decontamination effects. The oil extraction process requires further optimization, but has several advantages compared to organic solvent extraction. These include easy implementation in an existing fishmeal processing line, use of a safe and nonflammable extraction medium, and expected lower investment and operation costs. A new integrated fishmeal and fish oil production and decontamination process line is proposed.

  19. Feasibility study of 3-T MR imaging of the skin

    Energy Technology Data Exchange (ETDEWEB)

    Aubry, Sebastien; Kastler, Bruno [CHU Jean Minjoz, Service de Radiologie A, Besancon Cedex (France); Universite de Franche-comte, Laboratoire Intervention, Imagerie, Ingenierie et Innovation en Sante, Besancon (France); Casile, Celine; Jehl, Jerome [CHU Jean Minjoz, Service de Radiologie A, Besancon Cedex (France); Humbert, Philippe [CHU Saint-Jacques, Service de Dermatologie, Besancon (France); Vidal, Chrystelle [CHU Saint-Jacques, Centre d' Investigation Clinique en Innovation technologique, Besancon (France)

    2009-07-15

    The purpose of this study was to assess the quality of 3-T magnetic resonance (MR) imaging of the skin, to describe skin anatomy at 3 T and to discuss future prospects of skin MRI. A 7-cm single-element surface receiver coil was developed for our 3-T MRI system. Thin sections were obtained with a three-dimensional FIESTA acquisition sequence and a spin-echo T1-weighted sequence (SET1). Prospective analysis was performed twice by two radiologists independently. Thirty-six healthy volunteers were included and underwent MRI on the face and the calf. Image quality was assessed regarding visibility of skin layers and quantification of artefacts. High field strength MR enables imaging of the skin with a high spatial in-plane resolution (87-180 {mu}m), the total examination lasting 15-20 min. Image quality was excellent for the calf (mean SET1 quality = 96%) with a high intra- and interobserver correlation (SET1 kappa coefficient concerning visibility of epidermis, dermis and hypodermis {>=} 0.84). Motion artefacts resulted in a small loss of quality and reproducibility for the face. In conclusion, 3-T MR allows high spatial resolution imaging of the skin and can potentially provide an accurate noninvasive means of analysing the skin. (orig.)

  20. A Comprehensive Feasibility Study of Marine CSEM Using Analytical Calculation

    Science.gov (United States)

    Furukawa, T.; Lee, K. H.; Yamane, K.

    2010-12-01

    The main purpose of marine controlled source electromagnetic (CSEM) sounding is to find subsurface resistive reservoir and thus reduce risk before drilling. The CSEM response, usually in the form of electric field, recorded by seafloor receivers along one or several survey lines have been used to detect subsurface resistors and rank prospects initially defined from seismic data. The CSEM forward modeling plays an important role in sensitivity studies, survey design and data interpretation. A number of 3-D modeling techniques has recently been reported, but only 1-D forward modeling provides analytical solutions using numerical integration. Based on EM1D originally developed at Lawrence Berkeley National Laboratory, we made some improvements in the following subjects. First, the accuracy of the solution has been improved especially when the source-receiver separation (offset) is large. The need for better accuracy stems from the fact that the sensitivity requirement in detecting a thin resistive layer in marine CSEM survey, potential indicator of hydrocarbon zone, is on the order of 10-15Volt/m. This is a very small number to deal with requiring highly accurate solutions. Second, transverse isotropy in electrical resistivity has been implemented so that one or more layers can have anisotropy to simulate vertically compressed sedimentary sections. Using such modified code, we investigate the sensitivity of a thin resistive, and/or transversely isotropic, hydrocarbon reservoir to marine CSEM methods. Both the time-domain and the frequency-domain responses are investigated.

  1. Feasibility study on the open charm rare decay at PANDA

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Donghee [Helmholtz Institut Mainz, Universitaet Mainz (Germany); Denig, Achim [Institut fuer Kernphysik, Universitaet Mainz (Germany); Collaboration: PANDA-Collaboration

    2015-07-01

    In the Standard Model (SM), Flavor Changing Neutral Currents (FCNC) are forbidden at the tree level and highly suppressed at the loop level by the GIM mechanism. Studies of such FCNC decay processes provide a sensitive probe of New Physics (NP) beyond the SM. Some of the SM extensions predict that the branching ratios of FCNC decays can be significantly enhanced by NP sources. We investigate the potential of rare charm decays to constrain the extension of the SM. A search for the FCNC decays of neutral D{sup 0} into two photons and two leptons or including radiative photon could be an opportunity to pursue with PANDA since electroweak channels involving photons in the final state are competitive with ongoing experiments. The event selection in the the environment of hadronic reactions is challenging, since the ratio between signal and background of about 10 orders of magnitude requires an effective background rejection. Results on the rare decay modes D{sup 0} → γγ and D{sup 0} → μ{sup +}μ{sup -} (γ) are presented, which were obtained using Monte Carlo simulations of the PANDA experiment. In this presentation, we perform an evaluation of upper limits of branching ratios incorporating previous experiments in sensitivity.

  2. THE IMPORTANCE OF THE FEASIBILITY STUDY FOR THE BUSINESS PLAN

    Directory of Open Access Journals (Sweden)

    CEAUSESCU IONUT

    2015-12-01

    Full Text Available The micro and macro-economical development of the world states is strongly influenced by the volume,structure and dynamic of finalized investment or being in various stages of progress The whole individual and social-human existence has its continuity and support in the area of investments. Looked at from the point of view of theory, as a complex and controversial financial category, appears to us in the investment plan as a practical reality that marks the past and future scans. In community life, occupying a central place investment, a factor which influences the application simultaneously, as well as the offer of goods or services. The argument in favor of this is given by the processes of training and multiplier effects generated by any investment project, whatever the sector of activity in which it applies. Implementation of a project in the sphere of production of goods and/or services has the effect increasing the diversification of supply and thus if it is validated by the market, rising incomes of economic agents. Investment project does not represent anything other than a set of tasks with a start and an end established, limited time, resources and budget, made in order to achieve a defined objective, the projects have become practically the main operational tool at the level of organizations, in the investment plan. Thus, in this study we propose to emphasize the importance of documentation that underpins the implementation of an investment project.

  3. ITER In-Cryostat inspection and repair feasibility studies

    Energy Technology Data Exchange (ETDEWEB)

    Reich, J., E-mail: Jens.Reich@iter.org [ITER Organization, CS 90 046, 13115 St Paul lez Durance Cedex (France); Cordier, J.-J.; Houtte, D. van [ITER Organization, CS 90 046, 13115 St Paul lez Durance Cedex (France); Evrard, D. [Sogeti High Tech, 180 rue Rene Descartes, 13857 Aix en Provence (France); Mercier, E. [AREVA CNIM KAH System Engineering Support, CS 50497, 13593 Aix en Provence Cedex 3 (France); Popa, T.; Doshi, B. [ITER Organization, CS 90 046, 13115 St Paul lez Durance Cedex (France)

    2011-10-15

    The ITER In-Cryostat maintenance study is an important precondition to guarantee the operation over the ITER lifetime. The ITER operation is subdivided mainly into two phases: 1.Hydrogen phase (non-nuclear operation phase). 2.Deuterium/Tritium phase (nuclear DT phase). The commissioning phase includes the initial phase of assembly. Within the first phase the ITER components will be tested; afterwards they will go into operation. The In-Cryostat maintenance shall facilitate all operations that could be required by In-Cryostat systems and the Cryostat itself. In cases of failures or unlikely events (e.g. earthquakes) it is necessary to provide man and tool access to In-Cryostat components. Overall functions which have to be implemented are: {center_dot}Inspection of components including leak localization (helium, water, air). {center_dot}Repair and replacement of component (instrumentation, parts or complete components). {center_dot}Regulatory inspections. It is presumed that most of component failure would occur at the beginning of the operational phase. This failure rate is expected to be very unlikely when ITER is being operating during the nuclear phase. For maintenance activities it is assumed that: {center_dot}The intervention frequency on each component is limited during its lifetime (e.g. inspections/repair during global shutdown). {center_dot}Most of these interventions will be required during the inactive phase. According to ALARA (As Low as Reasonable Achievable) rules maintenance activities will be planned in order to minimize the required human interventions during the active phase. Different tools have to be designed to perform the maintenance actions. As there are quiet all heavy components to be handled and removed, humans cannot perform the work without semi hands-on tools. The required permanent fixtures and tools are considered and pre-designed.

  4. Vapor-liquid phase behavior of the iodine-sulfur water-splitting process : LDRD final report for FY03.

    Energy Technology Data Exchange (ETDEWEB)

    Bradshaw, Robert W.; Larson, Richard S.; Lutz, Andrew E.

    2004-01-01

    This report summarizes the results of a one-year LDRD project that was undertaken to better understand the equilibrium behavior of the iodine-water-hydriodic acid system at elevated temperature and pressure. We attempted to extend the phase equilibrium database for this system in order to facilitate development of the iodine-sulfur water-splitting process to produce hydrogen to a commercial scale. The iodine-sulfur cycle for thermochemical splitting of water is recognized as the most efficient such process and is particularly well suited to coupling to a high-temperature source of process heat. This study intended to combine experimental measurements of vapor-liquid-liquid equilibrium and equation-of-state modeling of equilibrium solutions using Sandia's Chernkin software. Vapor-liquid equilibrium experiments were conducted to a limited extent. The Liquid Chernkin software that was developed as part of an earlier LDRD project was enhanced and applied to model the non-ideal behavior of the liquid phases.

  5. Electromyographic responses to emotional facial expressions in 6-7 year olds: A feasibility study

    NARCIS (Netherlands)

    Deschamps, P.K.H.; Schutte, I.; Kenemans, J.L.; Matthys, W.C.H.J.; Schutter, D.J.L.G.

    2012-01-01

    Preliminary studies have demonstrated that school-aged children (average age 9-10 years) show mimicry responses to happy and angry facial expressions. The aim of the present study was to assess the feasibility of using facial electromyography (EMG) as a method to study facial mimicry responses in

  6. Final Report for LDRD Project 02-FS-009 Gigapixel Surveillance Camera

    Energy Technology Data Exchange (ETDEWEB)

    Marrs, R E; Bennett, C L

    2010-04-20

    The threats of terrorism and proliferation of weapons of mass destruction add urgency to the development of new techniques for surveillance and intelligence collection. For example, the United States faces a serious and growing threat from adversaries who locate key facilities underground, hide them within other facilities, or otherwise conceal their location and function. Reconnaissance photographs are one of the most important tools for uncovering the capabilities of adversaries. However, current imaging technology provides only infrequent static images of a large area, or occasional video of a small area. We are attempting to add a new dimension to reconnaissance by introducing a capability for large area video surveillance. This capability would enable tracking of all vehicle movements within a very large area. The goal of our project is the development of a gigapixel video surveillance camera for high altitude aircraft or balloon platforms. From very high altitude platforms (20-40 km altitude) it would be possible to track every moving vehicle within an area of roughly 100 km x 100 km, about the size of the San Francisco Bay region, with a gigapixel camera. Reliable tracking of vehicles requires a ground sampling distance (GSD) of 0.5 to 1 m and a framing rate of approximately two frames per second (fps). For a 100 km x 100 km area the corresponding pixel count is 10 gigapixels for a 1-m GSD and 40 gigapixels for a 0.5-m GSD. This is an order of magnitude beyond the 1 gigapixel camera envisioned in our LDRD proposal. We have determined that an instrument of this capacity is feasible.

  7. Study of the Feasibility of a Coal-to-Liquids Plant in Interior Alaska

    Science.gov (United States)

    2011-05-12

    wastewater so that it can be reused in the CTL plant . – Reverse osmosis may be used for treatment of the BFW. - RO  large demand for electricity to...Scientific Research Study of the Feasibility of a Coal-to-Liquids Plant in Interior Alaska NDIA, E2S2 Conference, New Orleans, LA May 12, 2011 Report...2. REPORT TYPE 3. DATES COVERED 00-00-2011 to 00-00-2011 4. TITLE AND SUBTITLE Study of the Feasibility of a Coal-to-Liquids Plant in Interior

  8. Feasibility Study of a 270V DC Flat Cable Aircraft Electrical Power Distribution System.

    Science.gov (United States)

    1982-01-01

    POWER CABLE (27&A) 62 SPLICE ENVIRGNIMENT FIREWALL PENETRATION SPLICE I CU/2 C Fi gure 3.5.9.9 High, AmpacitY F/at Cable Replacemnt Harness InstallatiOn...NADC-82023-60 FEASIBILITY STUDY OF A.270V 0C FLAT CABLE AIRCRAFT ELECTRICAL POWER DISTRIBUTION SYSTEM SM.J. Musga R. J. Rinehart Boeing Aerospace Co...PERIOD COVEIRED FEASIBILITY STUDY OF A 270V DC FLAT CABLE Final Report AIRCRAFT ELECTRICAL POWER DISTRIBUTION SYSTEM 30 Dec. 1980 to Jan. 19824

  9. Understanding Patient Experience Using Internet-based Email Surveys: A Feasibility Study at Mount Sinai Hospital.

    Science.gov (United States)

    Morgan, Matthew; Lau, Davina; Jivraj, Tanaz; Principi, Tania; Dietrich, Sandra; Bell, Chaim M

    2015-01-01

    Email is becoming a widely accepted communication tool in healthcare settings. This study sought to test the feasibility of Internet-based email surveys of patient experience in the ambulatory setting. We conducted a study of email Internet-based surveys sent to patients in selected ambulatory clinics at Mount Sinai Hospital in Toronto, Canada. Our findings suggest that email links to Internet surveys are a feasible, timely and efficient method to solicit patient feedback about their experience. Further research is required to optimally leverage Internet-based email surveys as a tool to better understand the patient experience.

  10. A 12-week interdisciplinary rehabilitation trial in patients with gliomas – a feasibility study

    DEFF Research Database (Denmark)

    Hansen, Anders; Søgaard, Karen; Minet, Lisbeth Rosenbek

    2017-01-01

    %) was achieved at part one. However, the failure to meet predefined feasibility objectives of drop-out, adherence and patient satisfaction of the unsupervised intervention at part two have led to a protocol revision for a future randomized controlled trial. CONCLUSION: This study demonstrates that an intensive...... limitations in physical functioning, cognition, and emotional wellbeing. In a relatively small sample this study shows that supervised physical- and occupational therapy in patients with gliomas is safe and feasible in the initial treatment phase. Patients with gliomas can potentially improve functioning......PURPOSE: This report aims to assess the safety and feasibility of using an interdisciplinary rehabilitation intervention for a future randomized controlled trial in patients with gliomas in the initial treatment phase. METHOD: We conducted an outpatient two-part rehabilitation intervention...

  11. A pilot feasibility study of a peer-led mindfulness program for medical students

    Science.gov (United States)

    Danilewitz, Marlon; Bradwejn, Jacques; Koszycki, Diana

    2016-01-01

    Background Mindfulness meditation has gained momentum in medical circles for bolstering wellbeing and other facets of professionalism. This study evaluated the feasibility and benefits of a peer-led mindfulness meditation program (MMP) on medical student wellness and professionalism. Method Pre-clerkship students were recruited and randomized to the 8-week MMP or wait-list. Feasibility outcomes included ease of recruitment, program attendance and homework compliance. Other outcomes included self-reported psychological distress, empathy, self-compassion, mindfulness, altruism and program satisfaction. Results The MMP decreased levels of stress and enhanced mindfulness, self-compassion and altruism from baseline to post-study. Changes were not significant for the wait-list condition. Although satisfaction with the MMP was high compliance was suboptimal. Conclusions A peer-led MMP is feasible and may be a promising approach to enhance medical student wellbeing. Further research is needed to explore strategies to improve program compliance in this student population. PMID:27103950

  12. Assessing neuropsychological performance in a migrant farm working Colonia in Baja California, Mexico: a feasibility study.

    Science.gov (United States)

    Bousman, Chad A; Salgado, Hugo; Hendrix, Terence; Fraga, Miguel; Cherner, Mariana

    2011-08-01

    Neuropsychological impairments (NPI) can lead to difficulties in daily functioning and ultimately contribute to poor health outcomes. However, evidence for the feasibility of NPI assessment in resource-limited settings using tests developed in high literacy/high education cultures is sparse. The main objectives were to: (1) determine the feasibility and appropriateness of conducting neuropsychological assessments among a migrant farm worker population in Baja California, Mexico and (2) preliminary describe neuropsychological test performance in this unique population. A neuropsychological test battery was administered to 21 presumably healthy adults (8 men, 13 women) during a two-day international health services and research collaboration. All but one neuropsychological test (i.e. figure learning) was feasible and appropriate to administer to the study population. Contrary to expectations, participants performed better on verbal rather than nonverbal neuropsychological tests. Results support inclusion of neuropsychological tests into future studies among migrant farm worker populations in Baja California, Mexico.

  13. Study to determine the feasibility of obtaining true samples of oil and gas reservoirs. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Ward, C.E.; Sinclair, A.R.

    1977-10-01

    The study concludes that a feasible solution is possible which would provide up to about 90 percent information accuracy under many operating conditions, well within the economic range for most oil and gas operations. The study also concludes that there is potential feasibility for the development of systems to approach 100 percent information accuracy under many operating situations. However, the cost of such a system is far beyond those considered practical within the economics of the competitive oil and gas industry. The justification of such a system has been likened to that of a ''moon shot'' approach and would take several years of development before true feasibility and probability of success could be assessed.

  14. Hyperoxia increases arterial oxygen pressure during exercise in type 2 diabetes patients: A feasibility study

    NARCIS (Netherlands)

    R. Rozenberg (Robert); R.T. Mankowski (Robert T.); L.J.C. van Loon (Luc); J.G. Langendonk (Janneke); E.J.G. Sijbrands (Eric); A.H. van den Meiracker (Anton); H.J. Stam (Henk); S.F.E. Praet (Stephan)

    2016-01-01

    textabstractObjective: The study investigated the feasibility and potential outcome measures during acute hyperoxia in type 2 diabetes patients (DM2). Methods: Eleven DM2 patients (7 men and 4 women) were included in the study. The patients cycled (30 min at 20 % Wmax) whilst breathing three

  15. MODAS. Feasibility Study for Implementation of V-TECS Occupational Data Analysis System (ODAS).

    Science.gov (United States)

    Illinois State Occupational Information Coordinating Committee, Springfield.

    This feasibility study was conducted to determine if the Michigan Occupational Data Analysis System (MODAS) can be implemented or modified in Illinois by studying the information needs of state agencies and local educational institutions. Agencies were asked how they might use the MODAS system for activities such as curriculum development and…

  16. MODAS. Feasibility Study for Implementation of V-TECS Occupational Data Analysis System (ODAS).

    Science.gov (United States)

    Illinois State Occupational Information Coordinating Committee, Springfield.

    This feasibility study was conducted to determine if the Michigan Occupational Data Analysis System (MODAS) can be implemented or modified in Illinois by studying the information needs of state agencies and local educational institutions. Agencies were asked how they might use the MODAS system for activities such as curriculum development and…

  17. Connecting the person with dementia and family: a feasibility study of a telepresence robot.

    Science.gov (United States)

    Moyle, Wendy; Jones, Cindy; Cooke, Marie; O'Dwyer, Siobhan; Sung, Billy; Drummond, Suzie

    2014-01-24

    Maintenance of communication is important for people with dementia living in long-term care. The purpose of this study was to assess the feasibility of using "Giraff", a telepresence robot to enhance engagement between family and a person with dementia living in long-term care. A mixed-methods approach involving semi-structured interviews, call records and video observational data was used. Five people with dementia and their family member participated in a discussion via the Giraff robot for a minimum of six times over a six-week period. A feasibility framework was used to assess feasibility and included video analysis of emotional response and engagement. Twenty-six calls with an average duration of 23 mins took place. Residents showed a general state of positive emotions across the calls with a high level of engagement and a minimal level of negative emotions. Participants enjoyed the experience and families reported that the Giraff robot offered the opportunity to reduce social isolation. A number of software and hardware challenges were encountered. Participants perceived this novel approach to engage families and people with dementia as a feasible option. Participants were observed and also reported to enjoy the experience. The technical challenges identified have been improved in a newer version of the robot. Future research should include a feasibility trial of longer duration, with a larger sample and a cost analysis.

  18. Conducting Real-Time Videofluoroscopic Swallow Study via Telepractice: A Preliminary Feasibility and Reliability Study.

    Science.gov (United States)

    Burns, Clare L; Ward, Elizabeth C; Hill, Anne J; Phillips, Nick; Porter, Linda

    2016-06-01

    A small number of studies have examined the feasibility of conducting videofluoroscopic swallow studies (VFSS) via telepractice. While the results have confirmed this potential, the systems tested to date have either reported issues that impacted the ability to analyze/interpret the VFSS recordings in real time, or they were not designed to enable real-time interpretation. Further system design is needed to establish a telepractice model that enables the VFSS assessment to be both guided and interpreted live in real time. The aim of this study was to test the feasibility and reliability of using a telepractice system to enable live VFSS assessment. Twenty adult patients underwent a VFSS assessment directed by a telepractice SLP with competency in VFSS located in another room of the hospital. The telepractice clinician led the sessions using a C20 Cisco TelePresence System. This was linked in real time via a secure telehealth network (at 4 megabits per second (Mbit/s)) to a C60 Cisco TelePresence System located in a fluoroscopy suite, connected to the digital fluoroscopy system. Levels of agreement were calculated between the telepractice clinician and a face-to-face clinician who simultaneously rated the VFSS in real time. High levels of agreement for swallowing parameters (range = 75-100 %; k = -0.34 to 1.0) and management decisions (range = 70-100 %, k = 0.64-1.0) were found. A post-session questionnaire revealed clinicians agreed that the telepractice system enabled successful remote assessment of VFSS. The findings support the potential to conduct live VFSS assessment via a telepractice model.

  19. Auditory brain stem responses of premature infants to bone-conducted stimuli: a feasibility study.

    Science.gov (United States)

    Hooks, R G; Weber, B A

    1984-01-01

    The feasibility of bone conduction auditory brain stem response (ABR) audiometry in intensive care nursery neonates was investigated. Forty premature infants were tested with both air- and bone-conducted stimuli. Bone-conducted stimuli resulted in more identifiable ABRs and a greater number of subjects passing the hearing screening. The findings of this study suggest that bone conduction ABR audiometry is a feasible technique with premature infants. Due to the lower frequency composition of the bone-conducted click, it may be more effective than an air-conducted click when the immature cochlea is being evaluated.

  20. Geothermal Direct Use Feasibility Study on the Fort Bidwell Indian Reservation

    Energy Technology Data Exchange (ETDEWEB)

    Dale Merrick

    2007-04-20

    The Fort Bidwell Indian Reservation (FBIR) is rich in renewable energy resources. Development of its geothermal resources has the potential to profoundly affect the energy and economic future of the FBIC. Geothermal energy can contribute to making the reservation energy self-sufficient and, potentially, an energy exporter. The feasibility study assessed the feasibility of installing a geothermal district heating system to provide low-cost, efficient heating of existing and planned residences, community buildings and water, using an existing geothermal well, FB-3.

  1. Feasibility study of enhanced oil recovery for fields in decline. Export trade information (Final)

    Energy Technology Data Exchange (ETDEWEB)

    1991-08-01

    The report, generated by Scientific Software-Intercomp, Inc. for Yacimientos Petroliferos Fiscales Bolivianos, documents the results of a feasibility study which addressed the viability of developing petroleum areas in Bolivia. The primary objective of the project was to describe the reservoirs that have been discovered and their reserves, describe which would be the best alternatives for development of these reservoirs, and to determine the best alternatives for development of all the reserves together. The report, volume 4 of 4, concerns the feasibility of enhancing the oil or condensate recovery from a chosen group of fields (Yapacani, Humberto Suarez Roca, Vibora, La Pena, San Roque, and Camiri).

  2. From Idea to Innovation: The Role of LDRD Investments in Sandia's Recent Successful B61 Experiments.

    Energy Technology Data Exchange (ETDEWEB)

    Arrowsmith, Marie Danielle [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-11-01

    The Laboratory Directed Research and Development (LDRD) program, authorized by U.S. Congress in 1991, enables Department of Energy (DOE) laboratories to devote a small portion of their research funding to high-risk and potentially high-payoff research. Because it is high-risk, LDRD-supported research may not lead to immediate mission impacts; however, many successes at DOE labs can be traced back to investments in LDRD. LDRD investments have a history of enabling significant payoffs for long-running DOE and NNSA missions and for providing anticipatory new technologies that ultimately become critical to future missions. Many of Sandia National Laboratories’ successes can be traced back to investments in LDRD. Capabilities from three LDRDs were critical to recent tests of the B61-12 gravity bomb—tests that would previously have only been performed experimentally.

  3. Feasibility Study for the Establishment of a Pharmacy Technology Program. Volume 11, Number 8.

    Science.gov (United States)

    Bourke, Patricia G.; And Others

    In December 1980, a study was conducted by William Rainey Harper College (WRHC) to determine the feasibility of establishing a pharmacy technology program. Professional Life Science and Human Services staff members telephoned 13 hospital pharmacies and four retail pharmacies in WRHC's service area. It was felt that if the 15 responding pharmacies…

  4. Summary of some feasibility studies for site-specific solar industrial process heat

    Energy Technology Data Exchange (ETDEWEB)

    None

    1982-01-01

    Some feasibility studies for several different site specific solar industrial process heat applications are summarized. The followng applications are examined. Leather Tanning; Concrete Production: Lumber and Paper Processing; Milk Processing; Molding, Curing or Drying; Automobile Manufacture; and Food Processing and Preparation. For each application, site and process data, system design, and performance and cost estimates are summarized.

  5. The Chinese Society of Rare Earth is Studying The Feasibility of Marketing Rare Earth Futures

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    Lin Donglu,secretary-general of the Chinese Society of Rare Earth recently said,the Chinese Society of Rare Earth undertook the research on subject of the National Social Science Fund Foundation on the reform of Chinese rare earth trading pricing mechanism on promoting RMB globalization,and is focusing on studying the feasibility of marketing rare earth futures variety.

  6. Feasibility and preliminary effectiveness of preoperative therapeutic exercise in patients with cancer: a pragmatic study.

    NARCIS (Netherlands)

    Timmerman, H.; Groot, J.F. de; Hulzebos, H.J.; Knikker, R. de; Kerkkamp, H.E.M.; Meeteren, N.L. van

    2011-01-01

    The aim of this pilot study is to determine the feasibility and preliminary effectiveness of an individually designed preoperative therapeutic exercise program (PreTEP), in patients recently diagnosed with cancer and awaiting elective surgery. The purpose is to improve their physical fitness levels

  7. Aquatic Plant Control Research Program. Allelopathic Aquatic Plants for Aquatic Plant Management: A Feasibility Study

    Science.gov (United States)

    1989-10-01

    block number) FIELD GROUP SUB-GROUP Allelopathy "Bioassay . Growth inhibition. Aquatic macrophytes. Biocontrol Lena minor 19. ABSTRACT (Continue on...Bibliography of Aquatic Plant Allelopathy ........ Al 2 ALLELOPATHIC AQUATIC PLANTS FOR AQUATIC PLANT MANAGEMENT; A FEASIBILITY STUDY Introduction Background 1...nutrients, water, and other biotic effects could have overriding effects that appear as competition or allelopathy . These biotic factors must be

  8. Representative Sampling of Maritally Violent and Nonviolent Couples: A Feasibility Study

    Science.gov (United States)

    Farris, Coreen; Holtzworth-Munroe, Amy

    2007-01-01

    Despite the methodological advantages of representative sampling, few researchers in the field of marital violence have employed random samples for laboratory assessments of couples. The current study tests the feasibility and sampling success of three recruitment methods: (a) random digit dialing, (b) directory-assisted recruitment, and (c) a…

  9. A Stuttering Education and Bullying Awareness and Prevention Resource: A Feasibility Study

    Science.gov (United States)

    Langevin, Marilyn; Prasad, N. G. Narasimha

    2012-01-01

    Purpose: This pretest-posttest study examined the feasibility of using a curriculum-level stuttering education and bullying awareness and prevention program to improve peer attitudes toward children who stutter and attitudes toward bullying. Knowledge about potential responses to bullying and students' liking of the program also were examined.…

  10. Preliminary results of a feasibility study for a hard x-ray Kirkpatrick-Baez telescope

    DEFF Research Database (Denmark)

    Joensen, Karsten D.; Gorenstein, Paul; Wood, James L.

    1994-01-01

    the preliminary results of a feasibility study of a multifocus Kirkpatrick-Baez telescope. We conclude that high quality multilayers can be performed on relevant thin large flat substrate with adequate uniformity, and that existing deposition chambers can produce the multilayers at a rate of 0.42 m2 per day, so...

  11. Model based feasibility study on bidirectional check valves in wave energy converters

    DEFF Research Database (Denmark)

    Hansen, Anders Hedegaard; Pedersen, Henrik C.; Andersen, Torben Ole

    2014-01-01

    Discrete fluid power force systems have been proposed as the primary stage for Wave Energy Converters (WEC’s) when converting ocean waves into electricity, this to improve the overall efficiency of wave energy devices. This paper presents a model based feasibility study of using bidirectional check...

  12. Maximising the impact of qualitative research in feasibility studies for randomised controlled trials: guidance for researchers

    NARCIS (Netherlands)

    O’Cathain, A.; Hoddinott, P.; Lewin, S.; Thomas, K.J.; Young, B.; Adamson, J.; Jansen, J.F.M.; Mills, N.; Moore, G.; Donovan, J.L.

    2015-01-01

    Feasibility studies are increasingly undertaken in preparation for randomised controlled trials in order to explore uncertainties and enable trialists to optimise the intervention or the conduct of the trial. Qualitative research can be used to examine and address key uncertainties prior to a full t

  13. A Feasibility Study of Lead Free Solders for Level 1 Packaging Applications

    DEFF Research Database (Denmark)

    Chidambaram, Vivek; Hald, John; Hattel, Jesper Henri

    2009-01-01

    the equilibrium calculations by Scheil solidification simulations and optimization. A feasibility study has been carried out for the replacement of high-lead-containing solders with the focus on surface tension, natural radius of curvature, oxidation resistance, intermetallic compound formation, and environmental...

  14. A Feasibility Study of the "Cultural-Educational Park" for Chicago.

    Science.gov (United States)

    Leu, Donald J.; Candoli, I. Carl

    A report of a study conducted for the Chicago Public School System on the feasibility of the cultural-educational park answering the educational needs of the community. The concept is defined and its historical development traced, its advantages, disadvantages and evaluative criteria are noted, and finally, specific recommendations are made. A…

  15. Waste Management Plan for the Oak Ridge National Remedial Investigation/Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    1988-04-01

    In accordance with the requirements of the Remedial Investigation/Feasibility Study (RI/FS) Project Quality Assurance Plan, this Waste Management Plan establishes clear lines of responsibility and authority, documentation requirements, and operational guidance for the collection, identification, segregation, classification, packaging, certification, and storage/disposal of wastes. These subjects are discussed in the subsequent sections of this document.

  16. LASER THROMBOLYSIS IN ACUTE MYOCARDIAL-INFARCTION - RESULTS OF A CLINICAL FEASIBILITY STUDY

    NARCIS (Netherlands)

    DENHEIJER, P; VANDIJK, RB; PENTINGA, ML; HILLEGE, HL; LIE, KI

    1994-01-01

    Laser thrombolysis is a new, experimental, catheter based intervention aimed at selectivity removing intracoronary thrombus. This first clinical study was performed to assess the feasibility and safety of laser thrombolysis, as well as its potential therapeutic place in acute myocardial infarction.

  17. Feasibility and preliminary effectiveness of preoperative therapeutic exercise in patients with cancer: A pragmatic study

    NARCIS (Netherlands)

    Timmerman, H.; Groot, J.F. de; Hulzebos, H.J.; Knikker, R. de; Kerkkamp, H.E.M.; Meeteren, N.L.U. van

    2011-01-01

    The aim of this pilot study is to determine the feasibility and preliminary effectiveness of an individually designed preoperative therapeutic exercise program (PreTEP), in patients recently diagnosed with cancer and awaiting elective surgery. The purpose is to improve their physical fitness levels

  18. 76 FR 70152 - Pilot Program for Early Feasibility Study Investigational Device Exemption Applications

    Science.gov (United States)

    2011-11-10

    ... entitled ``Investigational Device Exemptions (IDE) for Early Feasibility Medical Device Clinical Studies... involve new approaches to IDE review to facilitate timely device and clinical protocol modifications... program are medical devices for which: 1. The sponsor has not already submitted an IDE application. 2....

  19. A Feasibility Study of Task-Based Teaching of College English Writing in Chinese EFL Context

    Science.gov (United States)

    Cao, Linying

    2012-01-01

    In this study the author draws on Jane Willis' TBL framework and examines its effects on the improvement of EFL learners' writing competence when such a framework is applied to college writing classrooms in Chinese EFL settings, and thus tentatively explores the feasibility of the task-based approach to the teaching of EFL writing. Results of this…

  20. Archimedes: a feasibility study of an experiment to weigh the electromagnetic vacuum

    CERN Document Server

    Calloni, Enrico; De Laurentis, Martina; Esposito, Giampiero; Grilli, M; Majorana, E; Pepe, G P; Petrarca, S; Puppo, Paola; Rapagnani, P; Ricci, Fulvio; Rosa, Luigi; Rovelli, Carlo; Ruggi, P; Saini, N L; Stornaiolo, Cosimo; Tafuri, Francesco

    2015-01-01

    Archimedes is a feasibility study of a future experiment to ascertain the interaction of vacuum fluctuations with gravity. The experiment should measure the force that the earth's gravitational field exerts on a Casimir cavity by using a small force detector. Here we analyse the main parameters of the experiment and we present its conceptual scheme, which overcomes in principle the most critical problems.

  1. Increasing Early Reading Skills in Young Signing Deaf Children Using Shared Book Reading: A Feasibility Study

    Science.gov (United States)

    Andrews, Jean F.; Liu, Hsiu-Tan; Liu, Chun-Jung; Gentry, Mary Anne; Smith, Zanthia

    2017-01-01

    A feasibility study was conducted to test a storybook intervention to increase early reading skills of 25 young signing deaf children of ages 4-9 in grades K through third grade. The children had wide ranges of hearing losses, non-verbal IQs, and signing skills. All were at risk for developing early reading skills, reading below the first grade…

  2. Closure of Oroantral Communications Using Biodegradalble Polyurethane Foam : A Feasibility Study

    NARCIS (Netherlands)

    Visscher, Susan H.; van Minnen, Baucke; Bos, Rudolf R. M.

    2010-01-01

    Purpose: The aim of this study was to assess the feasibility of biodegradable polyurethane (PU) foam for closure of oroantral communications (OACs). Patients and Methods: Ten consecutive patients with OACs (existing Results: In 5 patients, the OACs were closed successfully without complications. Thr

  3. Therapist-Designed Adaptive Riding in Children With Cerebral Palsy : Results of a Feasibility Study

    NARCIS (Netherlands)

    Angsupaisal, Mattana; Visser, Baudina; Alkema, Anne; Meinsma-van der Tuin, Marja; Maathuis, Carel G. B.; Reinders-Messelink, Heleen; Hadders-Algra, Mijna

    2015-01-01

    Background. It is debatable whether adaptive riding (AR) in children with cerebral palsy (CP) improves postural control and gross motor development. Objective. The study aim was to explore the feasibility of an extensive assessment protocol for a randomized controlled trial of therapist-designed ada

  4. The application of TachoSil (R) for sealing colorectal anastomosis : a feasibility study

    NARCIS (Netherlands)

    Parker, M. C.; Pohlen, U.; Rinkes, I. H. M. Borel; Delvin, T.

    2013-01-01

    Aim Anastomotic leakage is a frequent postoperative complication of colorectal resection. This nonrandomized study assessed the feasibility and safety of applying a haemostatic tissue sealant (TachoSil (R)) to colorectal anastomoses following resection. Method TachoSil was applied as reinforcement o

  5. Feasibility studies - Oesthammar, Nykoeping, Oskarshamn, Tierp, Hultsfred and Aelvkarleby. Summary report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-06-01

    Swedish Nuclear Fuel and Waste Management Company, SKB, has carried out feasibility studies on a municipal scale as a part of the siting programme for the deep repository for spent nuclear fuel. Final reports describing the results of the six feasibility studies in Oesthammar, Nykoeping, Oskarshamn, Tierp, Aelvkarleby and Hultsfred were submitted during the autumn and winter of 2000/2001. With this as a basis, the siting work can now proceed to the next phase - site investigations. In this stage, investigations that include test drilling will be conducted on at least two sites. In December 2000, SKB published the report 'Integrated account of method, site selection and programme prior to the site investigation phase', in which SKB stipulates where they want to conduct site investigations and how they will be carried out. The report is being reviewed by the Swedish Nuclear Power Inspectorate during the first half of 2001. Before the site investigations can be initiated,the go-ahead is required from the national safety authorities, the Government, and concerned municipalities and landowners. SKB projects that the it will be possible to commence the site investigations in 2002. This report comprises an English summary of the final reports from the six feasibility studies. The report summarizes the most important results and conclusions from the different feasibility studies. All six final reports are available in their entirety in Swedish.

  6. A Feasibility Study for Mobile Marketing and Distribution Occupational Laboratories in North Dakota.

    Science.gov (United States)

    Kohns, Donald P.

    A study determined the feasibility of a mobile laboratory for marketing and distribution in North Dakota. It attempted to answer four questions: (1) What types of staffing, equipment, curriculum, and delivery systems are presently being utilized in mobile laboratories throughout the nation? (2) What significant information obtained from mobile…

  7. A Small-Scale, Feasibility Study of Academic Language Time in Primary Grade Language Arts

    Science.gov (United States)

    Roskos, Kathleen A.; Zuzolo, Nicole; Primm, Ashley

    2017-01-01

    A small-scale feasibility study was conducted to explore the implementation of academic language time (ALT) in primary grade classrooms with and without access to digital devices. Academic language time is a structural change that dedicates a portion of language arts instructional time to direct vocabulary instruction using evidence-based…

  8. Keep Your Brain Fit! A Psychoeducational Training Program for Healthy Cognitive Aging: A Feasibility Study

    Science.gov (United States)

    Reijnders, Jennifer; van Heugten, Caroline; van Boxtel, Martin

    2015-01-01

    A psychoeducational face-to-face training program (Keep Your Brain Fit!) was developed to support the working population in coping with age-related cognitive changes and taking proactive preventive measures to maintain cognitive health. A feasibility study was conducted to test the training program presented in a workshop format. Participants…

  9. Test of Wheeled Mobility (TOWM) and a short wheelie test : a feasibility and validity study

    NARCIS (Netherlands)

    Fliess-Douer, Osnat; Van der Woude, Lucas Hv; Vanlandewijck, Yves C.

    2013-01-01

    Objective: To assess the feasibility and validity of both the Test of Wheeled Mobility (TOWM) and a wheelie test. Design: Cross-sectional study. Setting: KU Leuven gymnasium. Subjects: Thirty male manual wheelchair users (age range 23-53 years) with spinal cord injury. Interventions: Participants pr

  10. Tailored interventions to promote Active Ageing using mobile technology: a feasibility study

    NARCIS (Netherlands)

    Cabrita, M.; Melenk, J.; El Menshawy, N.; Tabak, Monique; Vollenbroek-Hutten, Miriam Marie Rosé

    2016-01-01

    Introduction: Mobile technologies facilitate innovative and ubiquitous interventions to promote Active Ageing in daily life. To ensure adoption, such interventions must be designed in co-operation with older adults. This work presents the results of a feasibility study of a system that monitors

  11. A Feasibility Study of Lead Free Solders for Level 1 Packaging Applications

    DEFF Research Database (Denmark)

    Chidambaram, Vivek; Hald, John; Hattel, Jesper Henri

    2009-01-01

    the equilibrium calculations by Scheil solidification simulations and optimization. A feasibility study has been carried out for the replacement of high-lead-containing solders with the focus on surface tension, natural radius of curvature, oxidation resistance, intermetallic compound formation, and environmental...

  12. Pharmacogenetics of drug-induced arrhythmias : a feasibility study using spontaneous adverse drug reactions reporting data

    NARCIS (Netherlands)

    De Bruin, Marie L; van Puijenbroek, Eugene P; Bracke, Madelon; Hoes, Arno W; Leufkens, Hubert G M

    2006-01-01

    PURPOSE: The bottleneck in pharmacogenetic research on rare adverse drug reactions (ADR) is retrieval of patients. Spontaneous reports of ADRs may form a useful source of patients. We investigated the feasibility of a pharmacogenetic study, in which cases were selected from the database of a spontan

  13. Short Message Service (SMS) Technology in Alcohol Research-A Feasibility Study

    NARCIS (Netherlands)

    Kuntsche, E.N.; Robert, B.

    2009-01-01

    Aim: The aim of this study was to describe the feasibility, advantages and limitations of the combined use of Internet and SMS technology to assess alcohol use, and to test whether an SMS sent in the evening (i.e. prior to a possible drinking event) changed the respondents' assessment, made on the

  14. Waste Management Plan for the Oak Ridge National Remedial Investigation/Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    1988-04-01

    In accordance with the requirements of the Remedial Investigation/Feasibility Study (RI/FS) Project Quality Assurance Plan, this Waste Management Plan establishes clear lines of responsibility and authority, documentation requirements, and operational guidance for the collection, identification, segregation, classification, packaging, certification, and storage/disposal of wastes. These subjects are discussed in the subsequent sections of this document.

  15. Feasibility and impact of a physical exercise program in patients with advanced cancer: a pilot study

    NARCIS (Netherlands)

    Dungen, I.A. van den; Verhagen, C.A.; Graaf, W.T.A. van der; Berg, J.P. van den; Vissers, K.C.P.; Engels, Y.M.

    2014-01-01

    OBJECTIVE: Our aim was to investigate the feasibility of completing an exercise program in patients with advanced cancer and to obtain preliminary data of its impact on physical and quality of life (QoL) outcomes. METHODS: We conducted a nonrandomized pilot study. Participants were 26 palliative

  16. Tailored interventions to promote Active Ageing using mobile technology: a feasibility study

    NARCIS (Netherlands)

    Cabrita, M.; Melenk, J.; El Menshawy, N.; Tabak, M.; Vollenbroek-Hutten, M.

    2016-01-01

    Introduction: Mobile technologies facilitate innovative and ubiquitous interventions to promote Active Ageing in daily life. To ensure adoption, such interventions must be designed in co-operation with older adults. This work presents the results of a feasibility study of a system that monitors phys

  17. A Feasibility Study of Using ICT in Iranian Secondary Schools: The Case of Tehran Province

    Science.gov (United States)

    Fathi Vajargah, Kourosh; Saadattlab, Ayat

    2014-01-01

    This research presents the results of a feasibility assessment on implementing ICT in Tehran high schools. Mixed method research (both qualitative and quantitative) was employed and due to the nature of research, data collection included two stages: library and field study. Using the cluster method with 362 subjects, data was collected using a…

  18. The Dutch Perinatal Audit Project : a feasibility study for nationwide perinatal audit in the Netherlands

    NARCIS (Netherlands)

    De Reu, Paul; Van Diem, Mariet; Eskes, Martine; Oosterbaan, Herman; Smits, Luc; Merkus, Hans; Nijhuis, Jan

    2009-01-01

    Objective. To investigate the feasibility of nationwide perinatal mortality audits in the Netherlands. Study design. Over a one-year period, data for all cases of perinatal mortality were collected. Six perinatal audit panels of professionals within perinatal care investigated and classified causes

  19. A Feasibility Study of a Computer-Based Manpower Information System for the Construction Industry.

    Science.gov (United States)

    Markowitz, Edward A.; And Others

    The result of a Presidential directive, this study was conducted to determine the feasibility and means for implementing a computer-assisted labor market information system designed to improve information flow in and about the construction industry. Data were collected by means of: (1) extensive research reviews, (2) contact with selected…

  20. LASER THROMBOLYSIS IN ACUTE MYOCARDIAL-INFARCTION - RESULTS OF A CLINICAL FEASIBILITY STUDY

    NARCIS (Netherlands)

    DENHEIJER, P; VANDIJK, RB; PENTINGA, ML; HILLEGE, HL; LIE, KI

    1994-01-01

    Laser thrombolysis is a new, experimental, catheter based intervention aimed at selectivity removing intracoronary thrombus. This first clinical study was performed to assess the feasibility and safety of laser thrombolysis, as well as its potential therapeutic place in acute myocardial infarction.

  1. Short Message Service (SMS) Technology in Alcohol Research-A Feasibility Study

    NARCIS (Netherlands)

    Kuntsche, E.N.; Robert, B.

    2009-01-01

    Aim: The aim of this study was to describe the feasibility, advantages and limitations of the combined use of Internet and SMS technology to assess alcohol use, and to test whether an SMS sent in the evening (i.e. prior to a possible drinking event) changed the respondents' assessment, made on the f

  2. Therapeutic drug monitoring to individualize the dosing of pazopanib: a pharmacokinetic feasibility study

    NARCIS (Netherlands)

    Wit, D. de; Erp, N. van; Hartigh, J. den; Wolterbeek, R..; Hollander-van Deursen, M. den; Labots, M.; Guchelaar, H.J.; Verheul, H.M.; Gelderblom, H.

    2015-01-01

    BACKGROUND: Patients treated with the standard dose of pazopanib show a large interpatient variability in drug exposure defined as the area under the plasma concentration-time curve (AUC0-24h). The primary objective of this study was to evaluate the feasibility of pharmacokinetics (PK)-guided indivi

  3. Cle Elum Lake Anadromous Salmon Restoration Feasibility Study: Summary of Research, 1986-1999 Progress Report.

    Energy Technology Data Exchange (ETDEWEB)

    Dey, Douglas

    2000-04-01

    The focus of this research was to study the feasibility for anadromous salmonids to recolonize the habitat above reservoirs in the Yakima River without disruption to irrigation withdrawals. A primary concern was whether anadromous fish could successfully exit reservoirs and survive downstream passage through the Yakima and Columbia Rivers to the ocean.

  4. A feasibility study for conducting unattended night-time operations at WMKO

    Science.gov (United States)

    Stomski, Paul J.; Gajadhar, Sarah; Dahm, Scott; Jordan, Carolyn; Nordin, Tom

    2016-08-01

    In 2015, W. M. Keck Observatory conducted a study of the feasibility of conducting nighttime operations on Maunakea without any staff on the mountain. The study was motivated by the possibility of long term operational costs savings as well as other expected benefits. The goals of the study were to understand the technical feasibility and risk as well as to provide labor and cost estimates for implementation. The results of the study would be used to inform a decision about whether or not to fund and initiate a formal project aimed at the development of this new unattended nighttime operating capability. In this paper we will describe the study process as well as a brief summary of the results including the identified viable design alternative, the risk analysis, and the scope of work. We will also share the decisions made as a result of the study and current status of related follow-on activity.

  5. Can microbes compete with cows for sustainable protein production - A feasibility study on high quality protein

    Science.gov (United States)

    Vestergaard, Mike; Chan, Siu Hung Joshua; Jensen, Peter Ruhdal

    2016-11-01

    An increasing population and their increased demand for high-protein diets will require dramatic changes in the food industry, as limited resources and environmental issues will make animal derived foods and proteins, gradually more unsustainable to produce. To explore alternatives to animal derived proteins, an economic model was built around the genome-scale metabolic network of E. coli to study the feasibility of recombinant protein production as a food source. Using a novel model, we predicted which microbial production strategies are optimal for economic return, by capturing the tradeoff between the market prices of substrates, product output and the efficiency of microbial production. A case study with the food protein, Bovine Alpha Lactalbumin was made to evaluate the upstream economic feasibilities. Simulations with different substrate profiles at maximum productivity were used to explore the feasibility of recombinant Bovine Alpha Lactalbumin production coupled with market prices of utilized materials. We found that recombinant protein production could be a feasible food source and an alternative to traditional sources.

  6. Online Recruitment: Feasibility, Cost, and Representativeness in a Study of Postpartum Women.

    Science.gov (United States)

    Leach, Liana S; Butterworth, Peter; Poyser, Carmel; Batterham, Philip J; Farrer, Louise M

    2017-03-08

    Online recruitment is feasible, low-cost, and can provide high-quality epidemiological data. However, little is known about the feasibility of recruiting postpartum women online, or sample representativeness. The current study investigates the feasibility of recruiting a population of postpartum women online for health research and examines sample representativeness. Two samples of postpartum women were compared: those recruited online as participants in a brief survey of new mothers (n=1083) and those recruited face-to-face as part of a nationally representative study (n=579). Sociodemographic, general health, and mental health characteristics were compared between the two samples. Obtaining a sample of postpartum women online for health research was highly efficient and low-cost. The online sample over-represented those who were younger (aged 25-29 years), were in a de facto relationship, had higher levels of education, spoke only English at home, and were first-time mothers. Members of the online sample were significantly more likely to have poor self-rated health and poor mental health than the nationally representative sample. Health differences remained after adjusting for sociodemographic differences. Potential exists for feasible and low-cost e-epidemiological research with postpartum populations; however, researchers should consider the potential influence of sample nonrepresentativeness.

  7. Final report on LDRD project : advanced optical trigger systems.

    Energy Technology Data Exchange (ETDEWEB)

    Roose, Lars D.; Hadley, G. Ronald; Mar, Alan; Serkland, Darwin Keith; Geib, Kent Martin; Sullivan, Charles Thomas; Keeler, Gordon Arthur; Bauer, Thomas M. (LMATA Government Services, LLC., Albuquerque, NM); Peake, Gregory Merwin; Loubriel, Guillermo Manuel; Montano, Victoria A. (LMATA Government Services, LLC., Albuquerque, NM)

    2008-09-01

    are difficult to scale and manufacture with the required uniformity. As a promising alternative to multiple discrete edge-emitting lasers, a single wafer of vertical-cavity surface-emitting lasers (VCSELs) can be lithographically patterned to achieve the desired layout of parallel line-shaped emitters, in which adjacent lasers utilize identical semiconductor material and thereby achieve a degree of intrinsic optical uniformity. Under this LDRD project, we have fabricated arrays of uncoupled circular-aperture VCSELs to approximate a line-shaped illumination pattern, achieving optical fill factors ranging from 2% to 30%. We have applied these VCSEL arrays to demonstrate single and dual parallel line-filament triggering of PCSS devices. Moreover, we have developed a better understanding of the illumination requirements for stable triggering of multiple-filament PCSS devices using VCSEL arrays. We have found that reliable triggering of multiple filaments requires matching of the turn-on time of adjacent VCSEL line-shaped-arrays to within approximately 1 ns. Additionally, we discovered that reliable triggering of PCSS devices at low voltages requires more optical power than we obtained with our first generation of VCSEL arrays. A second generation of higher-power VCSEL arrays was designed and fabricated at the end of this LDRD project, and testing with PCSS devices is currently underway (as of September 2008).

  8. Obstacle detection for autonomous navigation : an LDRD final report.

    Energy Technology Data Exchange (ETDEWEB)

    Padilla, Denise D.

    2004-03-01

    This report summarizes the analytical and experimental efforts for the Laboratory Directed Research and Development (LDRD) project entitled 'Obstacle Detection for Autonomous Navigation'. The principal goal of this project was to develop a mathematical framework for obstacle detection. The framework provides a basis for solutions to many complex obstacle detection problems critical to successful autonomous navigation. Another goal of this project was to characterize sensing requirements in terms of physical characteristics of obstacles, vehicles, and terrain. For example, a specific vehicle traveling at a specific velocity over a specific terrain requires a sensor with a certain range of detection, resolution, field-of-view, and sufficient sensitivity to specific obstacle characteristics. In some cases, combinations of sensors were required to distinguish between different hazardous obstacles and benign terrain. In our framework, the problem was posed as a multidimensional, multiple-hypothesis, pattern recognition problem. Features were extracted from selected sensors that allow hazardous obstacles to be distinguished from benign terrain and other types of obstacles. Another unique thrust of this project was to characterize different terrain classes with respect to both positive (e.g., rocks, trees, fences) and negative (e.g., holes, ditches, drop-offs) obstacles. The density of various hazards per square kilometer was statistically quantified for different terrain categories (e.g., high desert, ponderosa forest, and prairie). This quantification reflects the scale, or size, and mobility of different types of vehicles. The tradeoffs between obstacle detection, position location, path planning, and vehicle mobility capabilities were also to be characterized.

  9. Interface physics in microporous media : LDRD final report.

    Energy Technology Data Exchange (ETDEWEB)

    Yaklin, Melissa A.; Knutson, Chad E.; Noble, David R.; Aragon, Alicia R.; Chen, Ken Shuang; Giordano, Nicholas J. (Purdue University, West Lafayette, IN); Brooks, Carlton, F.; Pyrak-Nolte, Laura J. (Purdue University, West Lafayette, IN); Liu, Yihong (Purdue University, West Lafayette, IN)

    2008-09-01

    This document contains a summary of the work performed under the LDRD project entitled 'Interface Physics in Microporous Media'. The presence of fluid-fluid interfaces, which can carry non-zero stresses, distinguishes multiphase flows from more readily understood single-phase flows. In this work the physics active at these interfaces has been examined via a combined experimental and computational approach. One of the major difficulties of examining true microporous systems of the type found in filters, membranes, geologic media, etc. is the geometric uncertainty. To help facilitate the examination of transport at the pore-scale without this complication, a significant effort has been made in the area of fabrication of both two-dimensional and three-dimensional micromodels. Using these micromodels, multiphase flow experiments have been performed for liquid-liquid and liquid-gas systems. Laser scanning confocal microscopy has been utilized to provide high resolution, three-dimensional reconstructions as well as time resolved, two-dimensional reconstructions. Computational work has focused on extending lattice Boltzmann (LB) and finite element methods for probing the interface physics at the pore scale. A new LB technique has been developed that provides over 100x speed up for steady flows in complex geometries. A new LB model has been developed that allows for arbitrary density ratios, which has been a significant obstacle in applying LB to air-water flows. A new reduced order model has been developed and implemented in finite element code for examining non-equilibrium wetting in microchannel systems. These advances will enhance Sandia's ability to quantitatively probe the rich interfacial physics present in microporous systems.

  10. LDRD project final report : hybrid AI/cognitive tactical behavior framework for LVC.

    Energy Technology Data Exchange (ETDEWEB)

    Djordjevich, Donna D.; Xavier, Patrick Gordon; Brannon, Nathan Gregory; Hart, Brian E.; Hart, Derek H.; Little, Charles Quentin; Oppel, Fred John III; Linebarger, John Michael; Parker, Eric Paul

    2012-01-01

    This Lab-Directed Research and Development (LDRD) sought to develop technology that enhances scenario construction speed, entity behavior robustness, and scalability in Live-Virtual-Constructive (LVC) simulation. We investigated issues in both simulation architecture and behavior modeling. We developed path-planning technology that improves the ability to express intent in the planning task while still permitting an efficient search algorithm. An LVC simulation demonstrated how this enables 'one-click' layout of squad tactical paths, as well as dynamic re-planning for simulated squads and for real and simulated mobile robots. We identified human response latencies that can be exploited in parallel/distributed architectures. We did an experimental study to determine where parallelization would be productive in Umbra-based force-on-force (FOF) simulations. We developed and implemented a data-driven simulation composition approach that solves entity class hierarchy issues and supports assurance of simulation fairness. Finally, we proposed a flexible framework to enable integration of multiple behavior modeling components that model working memory phenomena with different degrees of sophistication.

  11. Solar feasibility study for site-specific industrial-process-heat applications. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Murray, O.L.

    1980-03-18

    This study addresses the technical feasibility of solar energy in industrial process heat (IPH) applications in Mid-America. The study was one of two contracted efforts covering the MASEC 12-state region comprised of: Illinois, Michigan, North Dakota, Indiana, Minnesota, Ohio, Iowa, Missouri, South Dakota, Kansas, Nebraska, Wisconsin. The results of our study are encouraging to the potential future role of solar energy in supplying process heat to a varied range of industries and applications. We identified and developed Case Study documentation of twenty feasible solar IPH applications covering eight major SIC groups within the Mid-American region. The geographical distribution of these applications for the existing range of solar insolation levels are shown and the characteristics of the applications are summarized. The results of the study include process identification, analysis of process heat requirements, selection of preliminary solar system characteristics, and estimation of system performance and cost. These are included in each of the 20 Case Studies. The body of the report is divided into two primary discussion sections dealing with the Study Methodology employed in the effort and the Follow-On Potential of the identified applications with regard to possible demonstration projects. The 20 applications are rated with respect to their relative overall viability and procedures are discussed for possible demonstration project embarkment. Also, a possible extension of this present feasibility study for late-comer industrial firms expressing interest appears worthy of consideration.

  12. Feasibility Study of EO SARs as Opportunity Illuminators in Passive Radars: PAZ-Based Case Study

    Science.gov (United States)

    Bárcena-Humanes, Jose-Luis; Gómez-Hoyo, Pedro-José; Jarabo-Amores, Maria-Pilar; Mata-Moya, David; De-Rey-Maestre, Nerea

    2015-01-01

    Passive radars exploit the signal transmitted by other systems, known as opportunity illuminators (OIs), instead of using their own transmitter. Due to its almost total invulnerability to natural disasters or physical attacks, satellite OIs are of special interest. In this line, a feasibility study of Earth Observation Synthetic Aperture Radar (EO SAR) systems as OIs is carried out taking into consideration signal waveform, availability, bistatic geometry, instrumented coverage area and incident power density. A case study based on the use of PAZ, the first Spanish EO SAR, is presented. PAZ transmitted waveform, operation modes, orbit characteristics and antenna and transmitter parameters are analyzed to estimate potential coverages and resolutions. The study concludes that, due to its working in on-demand operating mode, passive radars based on PAZ-type illuminators can be proposed as complementing tools during the sensor commissioning phase, for system maintenance and for improving its performance by providing additional information about the area of interest and/or increasing the data updating speed, exploiting other sensors during the time PAZ is not available. PMID:26593921

  13. Feasibility Study of EO SARs as Opportunity Illuminators in Passive Radars: PAZ-Based Case Study

    Directory of Open Access Journals (Sweden)

    Jose-Luis Bárcena-Humanes

    2015-11-01

    Full Text Available Passive radars exploit the signal transmitted by other systems, known as opportunity illuminators (OIs, instead of using their own transmitter. Due to its almost total invulnerability to natural disasters or physical attacks, satellite OIs are of special interest. In this line, a feasibility study of Earth Observation Synthetic Aperture Radar (EO SAR systems as OIs is carried out taking into consideration signal waveform, availability, bistatic geometry, instrumented coverage area and incident power density. A case study based on the use of PAZ, the first Spanish EO SAR, is presented. PAZ transmitted waveform, operation modes, orbit characteristics and antenna and transmitter parameters are analyzed to estimate potential coverages and resolutions. The study concludes that, due to its working in on-demand operating mode, passive radars based on PAZ-type illuminators can be proposed as complementing tools during the sensor commissioning phase, for system maintenance and for improving its performance by providing additional information about the area of interest and/or increasing the data updating speed, exploiting other sensors during the time PAZ is not available.

  14. Feasibility Study of EO SARs as Opportunity Illuminators in Passive Radars: PAZ-Based Case Study.

    Science.gov (United States)

    Bárcena-Humanes, Jose-Luis; Gómez-Hoyo, Pedro-José; Jarabo-Amores, Maria-Pilar; Mata-Moya, David; Del-Rey-Maestre, Nerea

    2015-11-17

    Passive radars exploit the signal transmitted by other systems, known as opportunity illuminators (OIs), instead of using their own transmitter. Due to its almost total invulnerability to natural disasters or physical attacks, satellite OIs are of special interest. In this line, a feasibility study of Earth Observation Synthetic Aperture Radar (EO SAR) systems as OIs is carried out taking into consideration signal waveform, availability, bistatic geometry, instrumented coverage area and incident power density. A case study based on the use of PAZ, the first Spanish EO SAR, is presented. PAZ transmitted waveform, operation modes, orbit characteristics and antenna and transmitter parameters are analyzed to estimate potential coverages and resolutions. The study concludes that, due to its working in on-demand operating mode, passive radars based on PAZ-type illuminators can be proposed as complementing tools during the sensor commissioning phase, for system maintenance and for improving its performance by providing additional information about the area of interest and/or increasing the data updating speed, exploiting other sensors during the time PAZ is not available.

  15. LDRD final report on "Pumping up CO2 and conversion into useful molecules" (LDRD 105932).

    Energy Technology Data Exchange (ETDEWEB)

    Kemp, Richard Alan; Stewart, Constantine A.; Dickie, Diane A. (University of New Mexico, Albuquerque, NM)

    2009-11-01

    Group 12 metal cyclam complexes and their derivatives as well as (octyl){sub 2}Sn(OMe){sub 2} were examined as potential catalysts for the production of dimethyl carbonate (DMC) using CO{sub 2} and methanol. The zinc cyclams will readily take up carbon dioxide and methanol at room temperature and atmospheric pressure to give the metal methyl carbonate. The tin exhibited an improvement in DMC yields. Studies involving the reaction of bis-phosphino- and (phosphino)(silyl)-amido group 2 and 12 complexes with CO{sub 2} and CS{sub 2} were performed. Notable results include formation of phosphino-substituted isocyanates, fixation of three moles of CO{sub 2} in an unprecedented [N(CO{sub 2}){sub 3}]{sup 3-} anion, and rapid splitting of CS{sub 2} by main group elements under extremely mild conditions. Similar investigations of divalent group 14 silyl amides led to room temperature splitting of CO{sub 2} into CO and metal oxide clusters, and the formation of isocyanates and carbodiimides.

  16. FY05 LDRD Final Report Molecular Radiation Biodosimetry LDRD Project Tracking Code: 04-ERD-076

    Energy Technology Data Exchange (ETDEWEB)

    Jones, I M; A.Coleman, M; Lehmann, J; Manohar, C F; Marchetti, F; Mariella, R; Miles, R; Nelson, D O; Wyrobek, A J

    2006-02-03

    In the event of a nuclear or radiological accident or terrorist event, it is important to identify individuals that can benefit from prompt medical care and to reassure those that do not need it. Achieving these goals will maximize the ability to manage the medical consequences of radiation exposure that unfold over a period of hours, days, weeks, years, depending on dose. Medical interventions that reduce near term morbidity and mortality from high but non-lethal exposures require advanced medical support and must be focused on those in need as soon as possible. There are two traditional approaches to radiation dosimetry, physical and biological. Each as currently practiced has strengths and limitations. Physical dosimetry for radiation exposure is routine for selected sites and for individual nuclear workers in certain industries, medical centers and research institutions. No monitoring of individuals in the general population is currently performed. When physical dosimetry is available at the time of an accident/event or soon thereafter, it can provide valuable information in support of accident/event triage. Lack of data for most individuals is a major limitation, as differences in exposure can be significant due to shielding, atmospherics, etc. A smaller issue in terms of number of people affected is that the same dose may have more or less biological effect on subsets of the population. Biological dosimetry is the estimation of exposure based on physiological or cellular alterations induced in an individual by radiation. The best established and precise biodosimetric methods are measurement of the decline of blood cells over time and measurement of the frequency of chromosome aberrations. In accidents or events affecting small numbers of people, it is practical to allocate the resources and time (days of clinical follow-up or specialists laboratory time) to conduct these studies. However, if large numbers of people have been exposed, or fear they may have

  17. A workplace feasibility study of the effect of a minimal fruit intervention on fruit intake

    DEFF Research Database (Denmark)

    Alinia, Sevil; Lassen, Anne Dahl; Krogholm, Kirstine Suszkiewicz

    2011-01-01

    Objective: The main purpose of the study was to investigate the feasibility of using workplaces to increase the fruit consumption of participants by increasing fruit availability and accessibility by a minimal fruit programme. Furthermore, it was investigated whether a potential increase in fruit....... Vegetable, total energy and macronutrient intake remained unchanged through the intervention period for both groups. Conclusions: The present study showed that it is feasible to increase the average fruit intake at workplaces by simply increasing fruit availability and accessibility. Increased fruit intake...... intake would affect vegetable, total energy and nutrient intake. Design: A 5-month, controlled, workplace study where workplaces were divided into an intervention group (IG) and a control group (CG). At least one piece of free fruit was available per person per day in the IG. Total fruit and dietary...

  18. A Summary of Two Recent UAS Command and Control (C2) Communications Feasibility Studies

    Science.gov (United States)

    Ponchak, Denise S.; Auld, Elisabeth; Church, Gary; Henriksen, Stephen

    2016-01-01

    In Spring of 2015, the NextGen Institute conducted two UAS C2 Communications Feasibility Studies on behalf of the FAA UAS Integration Office to develop two limited UAS C2 operational examples, each involving low-altitude BLOS (Beyond Line of Sight) Line of Communication (LOC) UAS applications, as part of assessing the myriad practical UAS C2 deployment challenges associated with these approaches. The studies investigated the feasibility of "Point-to-Point" (PTP) and "Network" approaches to UAS C2 to better understand potential user needs and to explore evolutionary paths to establishing a nation-wide system for delivering UAS C2 communications. This paper will summarize the solicitation, approach and results of the two studies teams led by Aviation Management Associates, Inc. and Exelis Inc.

  19. Real-Time fMRI Neurofeedback with War Veterans with Chronic PTSD: A Feasibility Study

    Science.gov (United States)

    Gerin, Mattia I.; Fichtenholtz, Harlan; Roy, Alicia; Walsh, Christopher J.; Krystal, John H.; Southwick, Steven; Hampson, Michelle

    2016-01-01

    Many patients with post-traumatic stress disorder (PTSD), especially war veterans, do not respond to available treatments. Here, we describe a novel neurofeedback (NF) intervention using real-time functional magnetic resonance imaging for treating and studying PTSD. The intervention involves training participants to control amygdala activity after exposure to personalized trauma scripts. Three combat veterans with chronic PTSD participated in this feasibility study. All three participants tolerated well the NF training. Moreover, two participants, despite the chronicity of their symptoms, showed clinically meaningful improvements, while one participant showed a smaller symptom reduction. Examination of changes in resting-state functional connectivity patterns revealed a normalization of brain connectivity consistent with clinical improvement. These preliminary results support feasibility of this novel intervention for PTSD and indicate that larger, well-controlled studies of efficacy are warranted. PMID:27445868

  20. Feasibility study of utilizing solar furnace technology in steel making industry

    Energy Technology Data Exchange (ETDEWEB)

    Abbaspoursani, K. [The Faculty of Mechanical Engineering, Takestan Islamic Azad University (Iran, Islamic Republic of)], Email: a.abbaspour@tiau.ac.ir; Tofigh, A.A.; Nahang Toudeshki, S.; Hadadian, A. [Department of Energy, Materials and Energy Research Center (Iran, Islamic Republic of)], Email: Ali.A.Tofigh@gmail.com, email: toudeshki@hotmail.com, email: Arash.Hadadian@gmail.com; Farahmandpour, B. [Iranian Fuel Conservation company (Iran, Islamic Republic of)], Email: farahmandpour@gmail.com

    2011-07-01

    In Iran, the casting industry consumes 33.6% of electricity production, and most of this electricity is used in the melting process. Currently, scrap preheating is done using electric arc furnaces and the aim of this study is to assess the feasibility of replacing electric arc furnaces with solar furnaces. The performance of solar furnaces in the Iran Alloy Steel Company under Yazd climate conditions was studied. It was found that the solar irradiation time and solar insulation are sufficient to operate a solar furnace with the capacity to preheat 250 thousand tons per year of scrap to 500 degrees celsius. Results showed that such a furnace would decrease energy consumption by 40 GWh per year and that it would take 5 years to return the investment. This study demonstrated that operating a solar furnace in the Iran Alloy Steel Company under Yazd climate conditions is feasible and would result in economic and environmental benefits.

  1. Study of Optimal Perimetric Testing in Children (OPTIC: Feasibility, Reliability and Repeatability of Perimetry in Children.

    Directory of Open Access Journals (Sweden)

    Dipesh E Patel

    Full Text Available To investigate feasibility, reliability and repeatability of perimetry in children.A prospective, observational study recruiting 154 children aged 5-15 years, without an ophthalmic condition that affects the visual field (controls, identified consecutively between May 2012 and November 2013 from hospital eye clinics. Perimetry was undertaken in a single sitting, with standardised protocols, in a randomised order using the Humphrey static (SITA 24-2 FAST, Goldmann and Octopus kinetic perimeters. Data collected included test duration, subjective experience and test quality (incorporating examiner ratings on comprehension of instructions, fatigue, response to visual and auditory stimuli, concentration and co-operation to assess feasibility and reliability. Testing was repeated within 6 months to assess repeatability.Overall feasibility was very high (Goldmann=96.1%, Octopus=89% and Humphrey=100% completed the tests. Examiner rated reliability was 'good' in 125 (81.2% children for Goldmann, 100 (64.9% for Octopus and 98 (63.6% for Humphrey perimetry. Goldmann perimetry was the most reliable method in children under 9 years of age. Reliability improved with increasing age (multinomial logistic regression (Goldmann, Octopus and Humphrey, p<0.001. No significant differences were found for any of the three test strategies when examining initial and follow-up data outputs (Bland-Altman plots, n=43, suggesting good test repeatability, although the sample size may preclude detection of a small learning effect.Feasibility and reliability of formal perimetry in children improves with age. By the age of 9 years, all the strategies used here were highly feasible and reliable. Clinical assessment of the visual field is achievable in children as young as 5 years, and should be considered where visual field loss is suspected. Since Goldmann perimetry is the most effective strategy in children aged 5-8 years and this perimeter is no longer available, further

  2. Central magnetic cooling and refrigeration machines (chiller) and their assessment. A feasibility study - Final report

    Energy Technology Data Exchange (ETDEWEB)

    Egolf, P. W.; Gonin, C. [University of Applied Sciences of Western Switzerland, HEIG-VD, Yverdon-les Bains (Switzerland); Kitanovski, A. [University of Ljubljana, Ljubljana (Slovenia)

    2010-03-15

    This final report for the Swiss Federal Office of Energy (SFOE) presents the results of a feasibility study made concerning magnetic cooling and refrigeration machines. This report presents a comprehensive thermodynamic and economic analysis of applications of rotary magnetic chillers. The study deals with magnetic chillers based on permanent magnets and superconducting magnets, respectively. The numerical design of permanent magnet assemblies with different magnetic flux densities is discussed. The authors note that superconducting magnetic chillers are feasible only in large-scale applications with over 1 MW of cooling power. This report describes new ideas for magnetic refrigeration technologies, which go beyond the state of the art. They show potential for a substantial reduction of costs and further improvements in efficiency. Rotary magnetic liquid chillers with 'wavy' structures and using micro tubes are discussed, as are superconducting magnetic chillers and future magneto-caloric technologies.

  3. Geosynchronous Microwave Atmospheric Sounding Radiometer (MASR) feasibility studies. Volume 1: Management summary

    Science.gov (United States)

    1978-01-01

    The mission of the microwave atmospheric sounding radiometer (MASR) is to collect data to aid in the observation and prediction of severe storms. The geosynchronous orbit allows the continuous atmospheric measurement needed to resolve mesoscale dynamics. The instrument may operate in conjunction with this document, Volume 1 - Management, which summarizes the highlights of final reports on both the radiometer instrument and antenna studies. The radiometer instrument summary includes a synopsis of Volume 2 - Radiometer Receiver Feasibility, including design, recommended configuration, performance estimates, and weight and power estimates. The summary of the antenna study includes a synopsis of Volume 3 - Antenna Feasibility, including preliminary design tradeoffs, performance of selected design, and details of the mechanical/thermal design.

  4. Economic feasibility study for intensive and extensive wastewater treatment considering greenhouse gases emissions.

    Science.gov (United States)

    Molinos-Senante, M; Hernández-Sancho, F; Sala-Garrido, R; Cirelli, G

    2013-07-15

    Economic feasibility assessments represent a key issue for selecting which wastewater treatment processes should be implemented. The few applications that exist focus on the positive economic value of externalities, overlooking the existence of negative externalities. However, wastewater treatment plants (WWTPs) consume a significant amount of energy, contributing to climate change. In this context, as a pioneering approach, greenhouse gas emissions (GHG) have been incorporated as a negative externality of wastewater treatment. Within this framework, this study aims to compare the economic feasibility of five technologies, both intensive and extensive, for small communities. The results show that both the investment and operation costs are higher for intensive than for extensive technologies. Moreover, significant differences in the value of negative externalities were observed. This study demonstrates that from an economic perspective, constructed wetland is the most suitable option for treating wastewater in small agglomerations.

  5. A Feasibility Study on Low Temperature Thermochemical Treatments of Austenitic Stainless Steel in Fluidized Bed Furnace

    Science.gov (United States)

    Haruman, Esa; Sun, Yong; Triwiyanto, Askar; Manurung, Yupiter H. P.; Adesta, Erry Y.

    2011-04-01

    In this work, the feasibility of using an industrial fluidized bed furnace to perform low temperature thermochemical treatments of austenitic stainless steels has been studied, with the aim to produce expanded austenite layers with combined wear and corrosion resistance, similar to those achievable by plasma and gaseous processes. Several low temperature thermochemical treatments were studied, including nitriding, carburizing, combined nitridingcarburizing (hybrid treatment), and sequential carburizing and nitriding. The results demonstrate that it is feasible to produce expanded austenite layers on the investigated austenitic stainless steel by the fluidized bed heat treatment technique, thus widening the application window for the novel low temperature processes. The results also demonstrate that the fluidized bed furnace is the most effective for performing the hybrid treatment, which involves the simultaneous incorporation of nitrogen and carbon together into the surface region of the component in nitrogen and carbon containing atmospheres. Such hybrid treatment produces a thicker and harder layer than the other three processes investigated.

  6. A minimally invasive technique for the detection and analysis of pulmonary fat embolism: a feasibility study.

    Science.gov (United States)

    Filograna, Laura; Bolliger, Stephan A; Kneubuehl, Beat; Jackowski, Christian; Hatch, Gary M; Thali, Michael J

    2012-09-01

    We investigated the feasibility of postmortem percutaneous needle biopsy (PNB) for obtaining pulmonary samples adequate for the study of pulmonary fat embolism (PFE). Samples of both lungs were obtained from 26 cadavers via two different methods: (i) PNB and (ii) the double-edged knife technique, the gold standard at our institute. After water storage and Sudan III staining, six forensic pathologists independently examined all samples for the presence and severity of PFE. The results were compared and analyzed in each case regarding the vitality of the PFE and its relationship to the cause of death. The results showed that PFE was almost identically diagnosed and graded on the samples obtained via both methods. The discrepancies between the two techniques did not affect the diagnoses of vitality or cause of death related to PFE. This study demonstrates the feasibility of the PNB sampling method for the diagnosis and interpretation of PFE in the postmortem setting.

  7. Maximising the impact of qualitative research in feasibility studies for randomised controlled trials: guidance for researchers.

    Science.gov (United States)

    O'Cathain, Alicia; Hoddinott, Pat; Lewin, Simon; Thomas, Kate J; Young, Bridget; Adamson, Joy; Jansen, Yvonne Jfm; Mills, Nicola; Moore, Graham; Donovan, Jenny L

    2015-01-01

    Feasibility studies are increasingly undertaken in preparation for randomised controlled trials in order to explore uncertainties and enable trialists to optimise the intervention or the conduct of the trial. Qualitative research can be used to examine and address key uncertainties prior to a full trial. We present guidance that researchers, research funders and reviewers may wish to consider when assessing or undertaking qualitative research within feasibility studies for randomised controlled trials. The guidance consists of 16 items within five domains: research questions, data collection, analysis, teamwork and reporting. Appropriate and well conducted qualitative research can make an important contribution to feasibility studies for randomised controlled trials. This guidance may help researchers to consider the full range of contributions that qualitative research can make in relation to their particular trial. The guidance may also help researchers and others to reflect on the utility of such qualitative research in practice, so that trial teams can decide when and how best to use these approaches in future studies.

  8. Models of cognitive behavior in nuclear power plant personnel. A feasibility study: main report. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    Woods, D.D.; Roth, E.M.; Hanes, L.F.

    1986-07-01

    This report contains the results of a feasibility study to determine if the current state of models human cognitive activities can serve as the basis for improved techniques for predicting human error in nuclear power plants emergency operations. Based on the answer to this questions, two subsequent phases of research are planned. Phase II is to develop a model of cognitive activities, and Phase III is to test the model. The feasibility study included an analysis of the cognitive activities that occur in emergency operations and an assessment of the modeling concepts/tools available to capture these cognitive activities. The results indicated that a symbolic processing (or artificial intelligence) model of cognitive activities in nuclear power plants is both desirable and feasible. This cognitive model can be built upon the computational framework provided by an existing artificial intelligence system for medical problem solving called Caduceus. The resulting cognitive model will increase the capability to capture the human contribution to risk in probabilistic risk assessments studies. Volume I summarizes the major findings and conclusions of the study. Volume II provides a complete description of the methods and results, including a synthesis of the cognitive activities that occur during emergency operations, and a literature review on cognitive modeling relevant to nuclear power plants. 112 refs., 10 figs.

  9. Medical yoga in the workplace setting-perceived stress and work ability-a feasibility study.

    Science.gov (United States)

    Axén, Iben; Follin, Gabriella

    2017-02-01

    This study examined the feasibility of using an intervention of Medical Yoga in the workplace and investigated its effects on perceived stress and work ability. This was a quasi-experimental pilot study comparing a group who received Medical Yoga (intervention group, N=17), with a group waiting to receive Medical Yoga (control group, N=15). Medical Yoga in nine weekly sessions led by a certified instructor, as well as an instruction film to be followed at home twice weekly. Feasibility was assessed through recruitment, eligibility, willingness to participate, response to questionnaires and adherence to the intervention plan. Stress was measured with the Perceived Stress Scale, work ability with the Work Ability Index. Convincing unit managers to let their employees participate in this intervention was difficult. Eligibility was perfect, but only 40% of workers were willing to participate. The subjects adhered to a great extent to the intervention and answered the questionnaires satisfactorily. Reaching target individuals requires careful attention to informing participants. The intervention showed no significant effects on stress and work ability, though the two measures correlated significantly over time. Factors limiting feasibility of this workplace intervention were identified. Work place interventions may need to be sanctioned at a higher managerial level. The optimal time, length and availability of the workplace intervention should be explored further. Knowledge from this study could be used as a foundation when planning a larger scale study. Copyright © 2016 Elsevier Ltd. All rights reserved.

  10. Advancing the Fundamental Understanding of Fission: 2014 LDRD 20120077DR Review

    Energy Technology Data Exchange (ETDEWEB)

    White, Morgan C. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Tovesson, Fredrik K. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Sierk, Arnold John [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2014-02-06

    The following slides were presented as part of the LDRD 20120077DR Progress Appraisal Review held Tuesday, February 4, 2014. This is part of an ongoing project assessment the previous of which was documented in LA-UR-13-21182. This presentation documents the progress made against the goals agreed to as part of the 2013 review.

  11. Sensor Based Process Control (SBPC) Laboratories Directed Research and Development (LDRD)

    Energy Technology Data Exchange (ETDEWEB)

    Wronosky, J.B.

    1993-03-01

    This report describes the activities and results of an LDRD entitled Sensor Based Process Control. This research examined the needs of the plating industry for monitor and control capabilities with particular emphasis on water effluent from rinse baths. A personal computer-based monitor and control development system was used as a test bed.

  12. Hardness Assurance for Low-Energy Proton-Induced Single-Event Effects: Final report for LDRD Project 173134

    Energy Technology Data Exchange (ETDEWEB)

    Dodds, Nathaniel Anson [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)

    2015-08-01

    This report briefly summarizes three publications that resulted from a two-year LDRD. The three publications address a recently emerging reliability issue: namely, that low-energy protons (LEPs) can cause single-event effects (SEEs) in highly scaled microelectronics. These publications span from low to high technology readiness levels. In the first, novel experiments were used to prove that proton direct ionization is the dominant mechanism for LEP-induced SEEs. In the second, a simple method was developed to calculate expected on-orbit error rates for LEP effects. This simplification was enabled by creating (and characterizing) an accelerated space-like LEP environment in the laboratory. In the third publication, this new method was applied to many memory circuits from the 20-90 nm technology nodes to study the general importance of LEP effects, in terms of their contribution to the total on-orbit SEE rate.

  13. Feasibility study of a hybrid wind turbine system – integration with compressed air energy storage

    OpenAIRE

    Sun, Hao; Luo, Xing; Wang, Jihong

    2015-01-01

    Wind has been recognized as one of major realistic clean energy sources for power generation to meet the continuously increased energy demand and to achieve the carbon emission reduction targets. However, the utilisation of wind energy encounters an inevitable challenge resulting from the nature of wind intermittency. To address this, the paper presents the recent research work at Warwick on the feasibility study of a new hybrid system by integrating a wind turbine with compressed air energy ...

  14. A Feasibility Study for Life Signs Monitoring via a Continuous-Wave Radar

    Directory of Open Access Journals (Sweden)

    Francesco Soldovieri

    2012-01-01

    Full Text Available We present a feasibility study for life signs detection using a continuous-wave radar working in the band around 4 GHz. The data-processing is carried out by using two different data processing approaches, which are compared about the possibility to characterize the frequency behaviour of the breathing and heartbeat activity. The two approaches are used with the main aim to show the possibility of monitoring the vital signs activity in an accurate and reliable way.

  15. Peroral Endoscopic Myotomy for Treating Achalasia in an Animal Model: A Feasibility Study

    OpenAIRE

    Bang, Byoung Wook; Choi, Young Chul; Kim, Hyung Gil; Kwon, Kye Sook; Shin, Yong Woon; Lee, Don Haeng; Kim, Joon Mee

    2013-01-01

    Background/Aims Laparoscopic Heller myotomy with antireflux procedure is considered to be a standard treatment for achalasia. Recently, peroral endoscopic myotomy (POEM) was developed and performed on patients with achalasia. However, there is no report on POEM use in South Korea. The aim of this study was to evaluate the technical feasibility of POEM in a porcine model. Methods POEM was performed on two mini pigs. We performed upper endoscopy under general anesthesia. A submucosal tunnel was...

  16. High-intensity focused ultrasound to treat primary hyperparathyroidism: a feasibility study in four patients

    DEFF Research Database (Denmark)

    Kovatcheva, Roussanka D; Vlahov, Jordan D; Shinkov, Alexander D;

    2010-01-01

    Many patients with primary hyperparathyroidism either decline or are not candidates for surgical parathyroidectomy. There are drawbacks to medical therapy as well as percutaneous ethanol injection as alternative therapies for primary hyperparathyroidism. Therefore, in this pilot study, our aim...... was to test the feasibility, safety, and efficacy of a newly developed noninvasive high-intensity focused ultrasound (HIFU) technique for the nonsurgical management of primary hyperparathyroidism....

  17. Feasibility of a cohort study on health risks caused by occupational exposure to radiofrequency electromagnetic fields

    Directory of Open Access Journals (Sweden)

    Wahrendorf Jürgen

    2009-05-01

    Full Text Available Abstract Background The aim of this study was to examine the feasibility of performing a cohort study on health risks from occupational exposure to radiofrequency electromagnetic fields (RF-EMF in Germany. Methods A set of criteria was developed to evaluate the feasibility of such a cohort study. The criteria aimed at conditions of exposure and exposure assessment (level, duration, preferably on an individual basis, the possibility to assemble a cohort and the feasibility of ascertaining various disease endpoints. Results Twenty occupational settings with workers potentially exposed to RF-EMF and, in addition, a cohort of amateur radio operators were considered. Based on expert ratings, literature reviews and our set of predefined criteria, three of the cohorts were identified as promising for further evaluation: the personnel (technicians of medium/short wave broadcasting stations, amateur radio operators, and workers on dielectric heat sealers. After further analyses, the cohort of workers on dielectric heat sealers seems not to be feasible due to the small number of exposed workers available and to the difficulty of assessing exposure (exposure depends heavily on the respective working process and mixture of exposures, e.g. plastic vapours, although exposure was highest in this occupational setting. The advantage of the cohort of amateur radio operators was the large number of persons it includes, while the advantage of the cohort of personnel working at broadcasting stations was the quality of retrospective exposure assessment. However, in the cohort of amateur radio operators the exposure assessment was limited, and the cohort of technicians was hampered by the small number of persons working in this profession. Conclusion The majority of occupational groups exposed to RF-EMF are not practicable for setting up an occupational cohort study due to the small numbers of exposed subjects or due to exposure levels being only marginally higher

  18. A Feasibility Study on the Control of a Generic Air Vehicle Using Control Moment Gyros

    Science.gov (United States)

    Lim, Kyong B.; Moerder, Daniel D.

    2006-01-01

    This paper examines feasibility and performance issues in using Control Moment Gyroscopes (CMGs) to control the attitude of a fixed-wing aircraft. The paper describes a control system structure that permits allocating control authority and bandwidth between a CMG system and conventional aerodynamic control surfaces to stabilize a vehicle with neutral aerodynamic stability. A simulation study explores the interplay between aerodynamic and CMG effects, and indicates desirable physical characteristics for a CMG system to be used for aircraft attitude control.

  19. The effect of glass shape on alcohol consumption in a naturalistic setting: a feasibility study.

    Science.gov (United States)

    Troy, David M; Maynard, Olivia M; Hickman, Matthew; Attwood, Angela S; Munafò, Marcus R

    2015-12-01

    Alcohol-related harms are a major public health concern, and population-level interventions are needed to reduce excessive alcohol consumption. Glass shape is an easily modifiable target for public health intervention. Laboratory findings show beer is consumed slower from a straight glass compared to a curved glass, but these findings have not been replicated in a naturalistic setting. The purpose of this study is to investigate the feasibility of conducting a randomised controlled trial investigating the effect of glass shape on alcohol consumption in public houses. Straight and curved half-pint and pint glasses were delivered to three public houses over two weekends. Glass type was counterbalanced over the two weekends and between the public houses. Monetary takings were recorded as an indirect measure of consumption. Replacing stocks of glassware in public houses was feasible and can be enacted in a short space of time. One landlord found the study too disruptive, possibly due to a laborious exchange of glassware and complaints about the new glassware from some customers. One public house's dishwasher could not accommodate the supplied curved full-pint glasses. Obtaining monetary takings from public house staff was a feasible and efficient way of measuring consumption, although reporting absolute amounts may be commercially sensitive. Monetary takings were reduced by 24 % (95 % confidence interval 77 % reduction to 29 % increase) when straight glasses were used compared to curved glasses. This study shows that it is feasible to carry out a trial investigating glass shape in a naturalistic environment, although a number of challenges were encountered. Brewery owners and landlords are willing to engage with public health research in settings where alcohol is consumed, such as public houses. Good communication with stakeholders was vital to acquire good data, and highlighting the potential commercial benefits of participating was vital to the study's success. A

  20. The Archimedes project: a feasibility study for weighing the vacuum energy

    CERN Document Server

    Calloni, Enrico; De Laurentis, Martina; Esposito, Giampiero; Grilli, M; Majorana, Ettore; Pepe, G P; Petrarca, S; Puppo, P; Ricci, F; Rosa, Luigi; Rovelli, Carlo; Ruggi, P; Saini, N L; Stornaiolo, Cosimo; Tafuri, Francesco

    2014-01-01

    Archimedes is a feasibility study to a future experiment to ascertain the interaction of vacuum fluctuations with gravity. The future experiment should measure the force that the Earth's gravitational field exerts on a Casimir cavity by using a balance as the small force detector. The Archimedes experiment analyses the important parameters in view of the final measurement and experimentally explores solutions to the most critical problems.

  1. Therapeutic Argentine tango dancing for people living with Parkinson’s disease: a feasibility study

    OpenAIRE

    Blandy, Laura M.; Meg E. Morris; Winifred A Beevers

    2015-01-01

    Background: Individuals living with Parkinson’s disease (PD) can experience a range of movement disorders. Therapeutic dance is enjoyable and thought to improve mobility, balance and well being in some people with PD. The primary objective of this study was to evaluate the feasibility and safety of a 4 week Argentine tango dance program for people with PD. Methods: Six community dwelling individuals with mild-moderate PD were recruited from Parkinson’s support groups, movement disorder clini...

  2. Web-Based Depression Screening and Psychiatric Consultation for College Students: A Feasibility and Acceptability Study

    OpenAIRE

    2014-01-01

    Background. A steady rise in the prevalence of depression among college students has negatively affected student quality of life. This study investigates the feasibility and acceptability of a Web-based model, including Skype, to screen and provide psychiatric consultation to depressed college students. Methods. Students completed the 9-item Patient Health Questionnaire (PHQ-9) online; those who screened positive (PHQ-9 ≥ 10) or endorsed any level of suicidal ideation were offered Web-based p...

  3. Feasibility study for the quantification of total protein content by multiple prompt gamma-ray analysis.

    Science.gov (United States)

    Toh, Y; Murakami, Y; Furutaka, K; Kimura, A; Koizumi, M; Hara, K; Kin, T; Nakamura, S; Harada, H

    2012-06-01

    Protein is an important nutrient in foods. The classical nitrogen analysis method is the Kjeldahl technique, which is time-consuming and inconvenient. As a convenient method to quantify protein content in biological samples, the feasibility of application of multiple prompt gamma-ray analysis (MPGA) to the quantification was studied. Results for protein content are reported for several reference materials and prove the method to be reliable.

  4. Pure waterjet drilling of articular bone: an in vitro feasibility study:

    OpenAIRE

    Biskup, Christian; Dunnen, Steven den; Kerkhoffs, Gino M. M. J.; Kraaij, Gert; Tuijthof, Gabrielle J. M.

    2013-01-01

    The clinical application of waterjet technology for machining tough human tissues, such as articular bone, has advantages, as it produces clean sharp cuts without tissue heating. Additionally, water supply is possible via flexible tubing, which enables minimally invasive surgical access. This pilot study investigates whether drilling bony tissue with pure waterjets is feasible. Water pressures between 20 and 120 MPa with an orifice of 0.6 mm were used to create waterjets to drill blind boring...

  5. Validity and Feasibility of a Digital Diet Estimation Method for Use with Preschool Children: A Pilot Study

    Science.gov (United States)

    Nicklas, Theresa A.; O'Neil, Carol E.; Stuff, Janice; Goodell, Lora Suzanne; Liu, Yan; Martin, Corby K.

    2012-01-01

    Objective: The goal of the study was to assess the validity and feasibility of a digital diet estimation method for use with preschool children in "Head Start." Methods: Preschool children and their caregivers participated in validation (n = 22) and feasibility (n = 24) pilot studies. Validity was determined in the metabolic research unit using…

  6. Implementation of a clinical decision support system using a service model: results of a feasibility study.

    Science.gov (United States)

    Borbolla, Damian; Otero, Carlos; Lobach, David F; Kawamoto, Kensaku; Gomez Saldaño, Ana M; Staccia, Gustavo; Lopez, Gastón; Figar, Silvana; Luna, Daniel; Bernaldo de Quiros, Fernan Gonzalez

    2010-01-01

    Numerous studies have shown that the quality of health care is inadequate, and healthcare organizations are increasingly turning to clinical decision support systems (CDSS) to address this problem. In implementing CDSS, a highly promising architectural approach is the use of decision support services. However, there are few reported examples of successful implementations of operational CDSS using this approach. Here, we describe how Hospital Italiano de Buenos Aires evaluated the feasibility of using the SEBASTIAN clinical decision support Web service to implement a CDSS integrated with its electronic medical record system. The feasibility study consisted of three stages: first, end-user acceptability testing of the proposed CDSS through focus groups; second, the design and implementation of the system through integration of SEBASTIAN and the authoring of new rules; and finally, validation of system performance and accuracy. Through this study, we found that it is feasible to implement CDSS using a service-based approach. The CDSS is now under evaluation in a randomized controlled trial. The processes and lessons learned from this initiative are discussed.

  7. Yoga for Health-Related Quality of Life in Adult Cancer: A Randomized Controlled Feasibility Study

    Directory of Open Access Journals (Sweden)

    Marcy McCall

    2015-01-01

    Full Text Available An increase in patient-led uptake of complementary therapies in adult cancer has led to a need for more rigorous study of such interventions and their outcomes. This study therefore aimed to evaluate the feasibility and acceptability of a yoga intervention in men and women receiving conventional treatment for a cancer diagnosis. Prospective, mixed methods feasibility trial allocated participants to receive one of three yoga interventions over a four-week study period. Data collection was completed through online survey of QOL-CA/CS and customized surveys. Fifteen participants were included (11 female undergoing treatment for breast, prostate, colorectal, brain, and blood and lung cancer. Two participants dropped out and complete qualitative and quantitative data sets were collected from 12 participants and four yoga instructors. Other outcome measures included implementation costs patient-reported preferences for yoga intervention and changes in QOL-CA/CS. Three types of yoga intervention were safely administered in adult cancer. Mixed methods, cost-efficiency, QOL-CA/CS, and evidence-based design of yoga intervention have been used to establish feasibility and patient-preferences for yoga delivery in adult caner. Results suggest that, with some methodological improvements, a large-scale randomized controlled trial is warranted to test the efficacy of yoga for male and female cancer patients. This trial is registered with Clinicaltrials.gov NCT02309112.

  8. Analyses of mouse breath with ion mobility spectrometry: a feasibility study.

    Science.gov (United States)

    Vautz, Wolfgang; Nolte, Jürgen; Bufe, Albrecht; Baumbach, Jörg I; Peters, Marcus

    2010-03-01

    Exhaled breath can provide comprehensive information about the metabolic state of the subject. Breath analysis carried out during animal experiments promises to increase the information obtained from a particular experiment significantly. This feasibility study should demonstrate the potential of ion mobility spectrometry for animal breath analysis, even for mice. In the framework of the feasibility study, an ion mobility spectrometer coupled with a multicapillary column for rapid preseparation was used to analyze the breath of orotracheally intubated spontaneously breathing mice during anesthesia for the very first time. The sampling procedure was validated successfully. Furthermore, the breath of four mice (2 healthy control mice, 2 with allergic airway inflammation) was analyzed. Twelve peaks were identified directly by comparison with a database. Additional mass spectrometric analyses were carried out for validation and for identification of unknown signals. Significantly different patterns of metabolites were detected in healthy mice compared with asthmatic mice, thus demonstrating the feasibility of analyzing mouse breath with ion mobility spectrometry. However, further investigations including a higher animal number for validation and identification of unknown signals are needed. Nevertheless, the results of the study demonstrate that the method is capable of rapid analyses of the breath of mice, thus significantly increasing the information obtained from each particular animal experiment.

  9. Preliminary feasibility study on production of cobalt-60 source for industrial irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Joo, Po Kook; Park, Kyung Bae; Ahn, Yun Soo; Lee, Jong Tai; Kim, Hark Rho

    1999-05-01

    As there is a high possible demand of industrial Co-60 source in the world market, feasibility study of a project was performed to produce and to export Co-60 sources, utilizing KEPCO's Wolsung NPP for irradiation of cobalt and KAERI's hot-cells for fabrication of cobalt sources. Main concerns of the study were to understand irradiation and fabrication (encapsulation) processes and to examine related technologies, required facilities and equipment. In particular, it was examined intensively if it would be possible to modify facilities around the reactor vessel of Wolsung NPP tp substantiate the related licensing in order to irradiate cobalt in the reactor. It is expected that once, if cooperation scheme with MDS Nordion of Canada is established, main issues such as modification of facilities, related licensing, raw material procurement and technology transfer for high quality product will be solved. In order to review overall feasibility of the project, present status and prospect of the world market was surveyed and various usages of cobalt sources were reviewed with emphasis on possible demand increase per usage. Food poisoning accidents are prevailing worldwide and food irradiation with cobalt sources is considered as a promising measure to prevent them and may bring forth high increase of cobalt sources demand in the world market. Preliminary economic feasibility was studied in conservation, evaluating roughly the investment and the operating cost based on materials from various information sources. (author)

  10. Improving care quality and preventing maltreatment in institutional care – a feasibility study with caregivers

    Directory of Open Access Journals (Sweden)

    Katharin eHermenau

    2015-07-01

    Full Text Available Institutionalized children in low-income countries often face maltreatment and inadequate caregiving. In addition to prior traumatization and other childhood adversities in the family of origin, abuse and neglect in institutional care are linked to various mental health problems. By providing a manualized training workshop for caregivers, we aimed at improving care quality and preventing maltreatment in institutional care. In Study 1, 29 participating caregivers rated feasibility and efficacy of the training immediately before, directly after, and three months following the training workshop. The results showed high demand, good feasibility, high motivation and acceptance of caregivers. They reported improvements in caregiver-child relationships, as well as in the children’s behavior. Study 2 assessed exposure to maltreatment and the mental health of 28 orphans living in one institution in which all caregivers had been trained. The children were interviewed 20 months before, one month before, and three months after the training. Children reported a decrease in physical maltreatment and assessments showed a decrease in mental health problems. Our approach seems feasible under challenging circumstances and provides first hints for its efficacy. These promising findings call for further studies testing the efficacy and sustainability of this maltreatment prevention approach.

  11. Druzhba feasibility study: Barsukov and Tarasov fields, 1995. Workover procedures. Export trade information

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-01-03

    The study, conducted by NEFT, was funded by the U.S. Trade and Development Agency. The report shows the results of a feasibility study conducted for the rehabilitation of oil wells in Baruskov and Tarasov fields. The objectives of the study include a plan for improving well and waterflood performance, and to determine materials and equipment needed. The report also covers capital and operating costs, as well as an evaluation of project economics based on Russian law. This is Volume 3 of the study containing the Workover Procedures for wells in both Barsukov and Tarasov fields.

  12. Druzhba feasibility study: Barsukov and Tarasov fields, 1995. Main report. Export trade information

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-01-03

    The study, conducted by NEFT, was funded by the U.S. Trade and Development Agency. The report shows the results of a feasibility study conducted for the rehabilitation of oil wells in Baruskov and Tarasov fields. The objectives of the study include a plan for improving well and waterflood performance, and to determine materials and equipment needed. The report also covers capital and operating costs, as well as an evaluation of project economics based on Russian law. This is Volume 1 of the study containing the Main Report. It is divided into the following sections: (1) Figures; (2) Tables; (3) Economic Tables; (4) Maps; (5) Environmental Safety.

  13. Feasibility study of a railgun as a driver for impact fusion: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Thio. Y.C.

    1986-06-01

    The feasibility of a railgun as a driver for impact fusion is studied through a series of theoretical and experimental investigations. The results of both the theoretical and experimental investigations presented here have helped to identify the potential problems of the railgun launcher to attain velocity in excess of 100 km/s. These include ablation, viscous drag, and secondary arc formation due to either armature dispersion (instability) or restrike. These problems are analyzed and examined experimentally. The behavior of the conventional open-plasma-armature driven railguns have been shown to be quite complex and not easily controllable in the domain of ultrahigh velocity (>6 km/s). Methods to overcome these problems are proposed, analyzed in regards to their technological feasibility, and tested experimentally wherever possible. Techniques for reducing radiative ablation, the concept of a mechanically controlled plasma armature, and the concept of achieving super high augmentation by the technique of trans-augmentation are presented.

  14. Delivery of Internet-based cancer genetic counselling services to patients' homes: a feasibility study.

    Science.gov (United States)

    Meropol, Neal J; Daly, Mary B; Vig, Hetal S; Manion, Frank J; Manne, Sharon L; Mazar, Carla; Murphy, Camara; Solarino, Nicholas; Zubarev, Vadim

    2011-01-01

    We examined the feasibility of home videoconferencing for providing cancer genetic education and risk information to people at risk. Adults with possible hereditary colon or breast and ovarian cancer syndromes were offered Internet-based counselling. Participants were sent web cameras and software to install on their home PCs. They watched a prerecorded educational video and then took part in a live counselling session with a genetic counsellor. A total of 31 participants took part in Internet counselling sessions. Satisfaction with counselling was high in all domains studied, including technical (mean 4.3 on a 1-5 scale), education (mean 4.7), communication (mean 4.8), psychosocial (mean 4.1) and overall (mean 4.2). Qualitative data identified technical aspects that could be improved. All participants reported that they would recommend Internet-based counselling to others. Internet-based genetic counselling is feasible and associated with a high level of satisfaction among participants.

  15. Geothermal resource, engineering and economic feasibility study for the City of Ouray, Colorado. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, R.T.; Raskin, R.; Zocholl, J.R.

    1982-07-31

    A geothermal energy feasibility study has been performed for the City of Ouray, Colorado, to determine the potential economic development opportunities to the City. The resource assessment indicates the resource to be associated with the Ouray fault zone, the Leadville limestone formation, the high thermal gradient in the area of the San Juan mountains, and the recharge from precipitation in the adjacent mountains. Four engineering designs of alternative sizes, costs, applications, and years of start-up have been defined to offer the City a range of development scales. Life cycle cost analyses have been conducted for cases of both public and private ownership. All systems are found to be feasible on both economic and technical grounds. 49 refs., 8 figs.

  16. Ultrasound-Guided Perineural Injection at Guyon's Tunnel: An Anatomic Feasibility Study.

    Science.gov (United States)

    Meng, Stefan; Tinhofer, Ines; Grisold, Wolfgang; Weninger, Wolfgang J

    2015-08-01

    Compression of the ulnar nerve (UN) at the wrist causes neuropathy in the ulnar tunnel (UT), or Guyon's tunnel. In the absence of trauma and motor syndromes, primarily conservative treatment is considered. As in carpal tunnel syndrome, a perineural injection of corticosteroids may be beneficial. The aim of this study was to investigate the feasibility of ultrasound-guided injections at the UT. We performed ultrasound-guided injections of ink at the UN within the UT in 21 limbs from 11 non-embalmed cadavers. In all cases, we stained the perineural sheath of the superficial branch of the ulnar nerve within the UT. No ink was found inside the nerve or in adjacent structures such as blood vessels and tendons. In conclusion, perineural injection of the UN in the UT seems to be a technically feasible procedure. On the basis of these anatomic data, clinical trials are needed to prove the concept for routine use.

  17. Feasibility study for the quantification of total protein content by multiple prompt gamma-ray analysis

    Energy Technology Data Exchange (ETDEWEB)

    Toh, Y., E-mail: toh.yosuke@jaea.go.jp [Japan Atomic Energy Agency, Nuclear Science and Engineering Directorate, Tokai, Naka, Ibaraki 319-1195 (Japan); Murakami, Y. [University of Fukui, Research Institute of Nuclear Engineering, 3-9-1 Bunkyo, Fukui City, Fukui 910-8507 (Japan); Furutaka, K.; Kimura, A.; Koizumi, M.; Hara, K.; Kin, T.; Nakamura, S.; Harada, H. [Japan Atomic Energy Agency, Nuclear Science and Engineering Directorate, Tokai, Naka, Ibaraki 319-1195 (Japan)

    2012-06-15

    Protein is an important nutrient in foods. The classical nitrogen analysis method is the Kjeldahl technique, which is time-consuming and inconvenient. As a convenient method to quantify protein content in biological samples, the feasibility of application of multiple prompt gamma-ray analysis (MPGA) to the quantification was studied. Results for protein content are reported for several reference materials and prove the method to be reliable. - Highlights: Black-Right-Pointing-Pointer Nitrogen contents were analyzed by multiple prompt gamma-ray analysis. Black-Right-Pointing-Pointer The effect of neutron scattering was evaluated by Monte Carlo simulation. Black-Right-Pointing-Pointer Protein content can be calculated by nitrogen content. Black-Right-Pointing-Pointer The protein contents of standard materials agreed with the certified values. Black-Right-Pointing-Pointer The method is a rapid, non-destructive, feasible method to quantify protein.

  18. Eustachian Tube Dilation via a Transtympanic Approach in 6 Cadaver Heads: A Feasibility Study.

    Science.gov (United States)

    Dean, Marc; Chao, Wei-Chieh; Poe, Dennis

    2016-10-01

    The goal of this study was to evaluate the feasibility of endoscopic transtympanic balloon dilation of the cartilaginous eustachian tube. To accomplish this, transtympanic balloon dilation of the cartilaginous eustachian tube was performed on 11 eustachian tubes (6 cadaver heads). The balloon catheter was introduced and passed through the protympanic orifice of the eustachian tube transtympanically under endoscopic view and cannulated without incident in all cadavers. Computed tomography was then performed postprocedure to evaluate for inadvertent dilation of the bony eustachian tube, adverse placement of the balloon, or any bony fractures. The balloon was seen to be successfully inflated in the cartilaginous portion without damage to surrounding structures in all cases. This demonstrates that under endoscopic guidance, the protympanic orifice of the eustachian tube can be feasibly cannulated and reliably traversed, allowing for targeted dilation of the cartilaginous eustachian tube from a transtympanic approach.

  19. Feasibility study of a vertical slit for the LBS line of the Linac4

    CERN Document Server

    Ouzia, Alexandre; Maglioni, Cesare; Leitao, Ivo

    The feasibility study of a vertical Slit was performed. This Slit is needed for the diagnostic Line for Beam energy Spread of the Linac 4 (LBS line). The Linac 4 will replace the Linac 2 and enable the Large Hadron Collider (LHC) to reach an energy of 14 TeV (highest energy ever reached). When the beam impact on it, the Slit heats up and deforms. The deformation of the slit is the key problem. The present feasibility study aims at assessing whether or not it is feasible to keep this deformation below 50_m, according to the specifications [14]. The determination of all the issues related with the Slit was driven. The priority was given to the thermo-mechanical issues. The methodology chosen to approach the problem led to three steps: -\tFirst, the determination of possible designs for the Slit. One design was identified. -\tSecond, the determination of the best materials. Two figures of merit and a model were specifically conceived for it. Graphite R4550 was identified as the best material. -\tThird, the Monte-Ca...

  20. A Neutronic Feasibility Study of an OPR-1000 Core Design with Boron-bearing Fuel

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Kyung Hoon; Park, Sang Yoon; Lee, Chung Chan; Yang, Yong Sik [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2013-10-15

    In Westinghouse plants, boron is mainly used as a form of the integral fuel burnable absorber (IFBA) with a thin coating of zirconium diboride (ZrB{sub 2}) or wet annular burnable absorber (WABA) with a hollow Al{sub 2}O{sub 3}+B{sub 4}C pellet. In OPR-1000, on the other hand, gadolinia is currently employed as a form of an admixture which consists of Gd{sub 2}O{sub 3} of 6∼8 w/o and UO{sub 2} of natural uranium. Recently, boron-bearing UO{sub 2} fuel (BBF) with the high density of greater than 94%TD has been developed by using a low temperature sintering technique. In this paper, the feasibility of replacing conventional gadolinia-bearing UO{sub 2} fuel (GBF) in OPR-1000 with newly developed boron-bearing fuel is evaluated. Neutronic feasibility study to utilize the BBF in OPR-1000 core has been performed. The results show that the OPR-1000 core design with the BBF is feasible and promising in neutronic aspects. Therefore, the use of the BBF in OPR-1000 can reduce the dependency on the rare material such as gadolinium. However, the burnout of the {sup 10}B isotope results in helium gas, so fuel performance related study with respect to helium generation is needed.