WorldWideScience

Sample records for laser diodo sobre

  1. Complicações na dacriocistorrinostomia transcanalicular com laser diodo: complications Transcanalicular dacryocystorhinostomy with diode laser

    Directory of Open Access Journals (Sweden)

    Eduardo Alonso Garcia

    2009-08-01

    Full Text Available OBJETIVO: Analisar as complicações da aplicação do laser de diodo para o tratamento da obstrução nasolacrimal adquirida. MÉTODOS: Foram realizados 44 procedimentos (dacriocistorrinostomia transcanalicular com laser de diodo com intubação bicanalicular de silicone sob anestesia local entre fevereiro de 2002 a novembro de 2007 em 41 pacientes (3 bilateralmente, sendo 32 mulheres e 9 homens. RESULTADOS: As complicações mais frequentes no intraoperatório foram: dificuldade de passar a sonda de Crawford (13,6% e passagem da fibra óptica dificultada (11,3%. No pós-operatório, a epífora foi a ocorrência mais frequente (15,9%, seguida pela retirada acidental do silastic (11,3%. CONCLUSÃO: Os índices de complicações intra e pós-operatórias se equivalem aos artigos publicados com a mesma técnica cirúrgica (e mesmo tipo de laser.PURPOSE: To evaluate the complications of the use of diode laser in the treatment of acquired nasolacrimal obstruction. METHODS: Forty four procedures (transcanalicular dacryocystorhinostomy with diode laser with bicanalicular silicone tube intubation and local anesthesia where performed from February 2002 to November 2007 in 41 patients (3 bilaterally, 32 women and 9 men. RESULTS: The most common intraoperative complications were disability to pass the Crawford probe (13.6% and the laser probe (11.3%. Regarding postoperative complications, epiphora was the event of higher frequency (15.9% followed by the non-intentional silastic extrusion by the patient (11.3%. CONCLUSION: Intraoperative and postoperative complications rate were similar of others articles that demonstrated the same surgical technique (with same laser.

  2. Transscleral diode laser retinopexy in retinal reattachment surgery Retinopexia com laser de diodo transescleral na cirurgia de descolamento de retina

    Directory of Open Access Journals (Sweden)

    João Carlos de Miranda Gonçalves

    2004-02-01

    Full Text Available PURPOSE: Transscleral diode retinal photocoagulation (diopexy is becoming an accepted technique in the treatment of selected retinal diseases. The objective of this study is to evaluate diopexy technique in the production of adhesive chorioretinal lesions during the surgical treatment of the rhegmatogenous retinal detachment. METHODS: 25 patients with rhegmatogenous retinal detachment were enrolled in a prospective clinical-surgical study to evaluate the technique of transscleral diode laser photocoagulation to obtain adhesive chorioretinal lesions during retinal reattachment surgery. The surgery consisted of the placement of an exoplant silicon to produce a buckle effect combined with a drainage of subretinal fluid in most cases. RESULTS: By a mean follow-up of 10 months, 21 of 25 eyes had their retinas reattached after only one surgery with diopexy used in all cases. CONCLUSION: Transscleral diode laser photocoagulation was a technically easy, controlled, effective, reproducible and safe means of obtaining chorioretinal adhesion in retinal reattachment surgery.OBJETIVO: Fotocoagulação transescleral com laser de diodo (diopexia está se tornando técnica utilizada no tratamento de algumas doenças retinianas. O objetivo deste estudo é avaliar a técnica de diopexia na produção de lesões coriorretinianas aderentes durante o tratamento cirúrgico do descolamento de retina regmatogênico. MÉTODOS: Vinte e cinco pacientes com descolamento de retina regmatogênico participaram deste estudo clínico-cirúrgico prospectivo para avaliar a técnica de fotocoagulação com laser de diodo transescleral para obter lesões coriorretinianas aderentes durante a cirurgia de descolamento de retina. A cirurgia consistiu de colocação de explante de silicone para produzir efeito de introflexão escleral combinado com drenagem do líquido subretiniano na maioria dos casos. RESULTADOS: Após um período médio de seguimento de 10 meses, em 21 dos 25 olhos

  3. Control by hardware of government systems for laser diodes with STM32F4 and Peltier cells; Control por hardware de sistemas de gobierno para diodos laser con STM32F4 y celdas Peltier

    Energy Technology Data Exchange (ETDEWEB)

    Ulloa Solano, Natalia Irina

    2013-07-01

    A low cost prototype of a government system is developed for laser diodes with STM32F4 microcontrollers and Peltier cooling. Commercial and homemade government system (with STM32F4 microcontrollers ) are investigated with the objective of adequately control the current of a laser diode. Characteristics of STM32F4 microcontrollers are described. The low cost platforms as the Arduino and Raspberry Pi are compared. A bibliographical and documentary compilation is realized for the preliminary study of the components and tools to use in the prototype. The theory related with the heat transfer between a laser diode and the outside, and a Peltier cell and outside is summarized. A heat dissipation model is proposed of a system formed by a laser diode and Peltier cell. A control system of current and fed back temperature is designed and implemented to allow adequately control laser diodes without and with photodiode (2 pickups and 3 pickups respectively). The viability of control with free software is studied and corroborated. The temperature control of the laser diode using a Peltier cell as cooler has been possible through a simple control of ON/OFF mode. The integration of devices such as ADC, DAC, timers and facilities of STM32F4 microcontroller, have allowed to optimize costs by hardware, save time and costs. Also, the incorporation of the Cortex-M4 processor has optimized the consumption of operational resources and has executed much of its instruction set of efficient way. Because of this, the project has complied with its maximum as to low cost is concerned [Spanish] Un prototipo de bajo costo de un sistema de gobierno es desarrollado para diodos laser con microcontroladores STM32F4 y enfriamiento con Peltier. Los sistemas de gobierno comerciales y caseros (con microcontroladores STM32F4) son investigados con el objetivo de controlar adecuadamente la corriente de un diodo laser. Las caracteristicas de los microcontroladores STM32F4 son descritas. Las plataformas de

  4. Recubrimientos superficiales con láseres de diodos de alta potencia

    Directory of Open Access Journals (Sweden)

    Molpeceres, J. L.

    1998-04-01

    Full Text Available Nowadays, high power diode laser systems are available in the market. These systems, based on arrays of small diode lasers, can achieve more than 1 kW of output power and are currently offering new possibilities in the field of laser material processing where CO2 and Nd:YAG lasers were used up to the present. The results obtained in some materials cladding based on cobalt and nickel alloys as additional materials is presented. The instrumental set-up used in these experiments are described.

    La posibilidad de disponer actualmente de láseres de diodos con una potencia de emisión óptica superior a 1 kW permite abordar un gran número de aplicaciones en el ámbito del procesado de materiales con láser, dominado tradicionalmente por los láseres de CO2 y Nd:YAG. En el presente trabajo, se muestra la aplicación de los láseres de diodos de alta potencia al recubrimiento de materiales metálicos con aleaciones de base cobalto y níquel. Se describen las características del sistema empleado y se muestran los resultados obtenidos.

  5. Ciclofotocoagulação com laser diodo em glaucoma refratário, resultado a longo prazo Cyclophotocoagulation with diode laser in refractory glaucoma, long-term results

    Directory of Open Access Journals (Sweden)

    Vera Christina Waller de Lima

    2003-08-01

    Full Text Available OBJETIVO: Relatar experiência de longo prazo com ciclofotocoagulação com laser diodo em glaucomas refratários. MÉTODOS: Foram selecionados casos de glaucomas refratários com indicação de ciclofotocoagulação com laser diodo acoplado a uma sonda G (Iris Medical. Todos os procedimentos foram realizados pelo mesmo cirurgião que realizou 20 aplicações (em média com 2000 mW de potência em 270 graus de extensão, com a sonda colocada a 1,5 mm do limbo, por 2,0 a 2,5 s. Foram incluídos somente casos com pelo menos 6 meses de seguimento. Considerou-se sucesso cirúrgico Po final PURPOSE: To report long-term experience with cyclophotocoagulation using diode laser in refractory glaucomas. METHODS: We selected cases of refractory glaucoma with indication for cyclophotocoagulation (CPC with diode laser using a G probe (Iris Medical. All procedures were performed by the same surgeon: twenty applications of 2000 mW power at 270- degree extension. The probe placed set at 1.5 mm from the limbus during 2.0 a 2.5 s. Only cases with at least 6 months of follow-up were included. The procedure was considered successful when IOP was < 24 mmHg or decrease was larger or equal to 30% of the initial IOP with remission of symptoms. Only 25 patients (18.75% concluded the study (36 months. RESULTS: One hundred and thirty cases had a mean follow-up of 18,1 ± 9,6 months with 116 (87.2% successful cases and 17 (12,7% insuccess ful cases. Initial and final IOP were, 48.20 ± 12.11mmHg and 19.93 ± 11,93mmHg respectively (p < 0.0001. Main complications were: "Phthisis bulbi" in 7 (5.2% cases and long-term hypotony in 6 (4.5% cases. CONCLUSIONS: Considering the severity of our cases, we conclude that the long-term results of cyclophotocoagulation with diode laser for refractory glaucomas were satisfactory, with an acceptable incidence of complications.

  6. Contribuições ao uso de diodos emissores de luz em iluminação pública

    OpenAIRE

    Rodrigues, Cláudio Roberto Barbosa Simões

    2012-01-01

    No intuito de aportar contribuições ao uso de diodos emissores de luz (ou LEDs, do inglês Light Emmiting Diodes) em sistemas de iluminação pública, cobrindo lacunas existentes no cenário nacional, este trabalho traz uma ampla análise sobre este tema. São apresentados conceitos básicos da fotometria clássica e um estudo sobre adaptações da fotometria para baixos níveis de luminância, que é a condição observada nas vias públicas durante o período noturno. Propõe-se a utilização d...

  7. Effect of diode laser irradiation on the apical sealing of MTA retrofillings Efeito da irradiação de laser de diodo no selamento apical em retrobturações com MTA

    Directory of Open Access Journals (Sweden)

    Eliana Barbosa de Souza

    2006-09-01

    Full Text Available Apical sealing is essential for the success of paraendodontic surgery, so any procedure that may favor an adequate sealing of the apical remainder should be performed. The purpose of this study was to evaluate the influence of diode laser irradiation on the apical sealing of root-end cavities with MTA retrofillings. Root canals in twenty extracted human teeth were shaped with K-files and filled with gutta-percha. The apexes were cut off and root-end preparations were performed. The roots were divided randomly in 2 groups. Group 1 (ten specimens was retrofilled with MTA. Group 2 was irradiated with diode laser, with 1 W for 20 seconds, on the apical surface and root end cavity before retrofilling with MTA. The specimens had their external surfaces impermeabilized with cyanoacrylate, except for the apical surface, and were then immersed in 1% rhodamine B dye for 72 h and placed in plaster stone. After that, the specimens were submitted to longitudinal abrasion until half of the root remained. The linear dye leakage was observed in these mid-roots between the root canal wall and retrofilling. The linear dye leakage was measured with Image Lab software, and the results were statistically analyzed with Student's t test. There were no statistically significant differences between the two groups (p > 0.05. The diode laser irradiation did not improve the apical sealing of MTA retrofillings under the conditions of this in vitro study.O selamento apical é fundamental para o sucesso da cirurgia parendodôntica. Assim, procedimentos que melhorem o selamento do remanescente apical devem ser utilizados. O objetivo deste estudo foi verificar se a irradiação de laser de diodo poderia aumentar o selamento apical em cavidades retrógradas obturadas com MTA. Foram utilizadas 20 raízes de dentes humanos extraídos que, após preparo com lima tipo K, tiveram seus canais obturados com guta-percha. Os ápices foram cortados e sofreram preparo de cavidades retr

  8. Modificación superficial con láser de diodo de alta energía (HPDL de barreras térmicas de CaZrO3 depositadas por proyección térmica

    Directory of Open Access Journals (Sweden)

    Múnez, C. J.

    2007-08-01

    Full Text Available The aim of this investigation is to modify the surface of thermal sprayed CaZrO3 coatings to reduce their porosity and improve their properties. A high power diode laser was used to produce the melting of the superficial ceramic coating. Different parameters have been evaluated in the process, in particular laser beam power/energy and the laser scanning speed. Microstructural changes induced by the laser treatment were evaluated by light microscopy and environmental scanning electron microscopy. The coatings were also characterized by X ray diffraction in order to detect the possible phase transformations.

    Esta investigación ha desarrollado tratamientos de modificación superficial sobre recubrimientos de CaZrO3 proyectados térmicamente, encaminados a mejorar su densificación y propiedades. Para la fusión de la superficie cerámica se ha utilizado un láser de diodo de alta energía, evaluando la influencia de parámetros como la potencia del haz láser y la velocidad de barrido sobre la superficie. Las microestructuras inducidas por el tratamiento láser se analizaron utilizando un microscopio óptico y un microscopio electrónico de barrido ambiental. Los recubrimientos también se caracterizaron mediante difracción de rayos X para detectar posibles cambios de fase.

  9. Liposucción con diodo láser 980-nm (LSDL 980-nm: optimización de protocolo seguro en cirugía de contorno corporal Body contouring using laser diode 980-nm (LSDL 980-nm assisted lipolysis: a safe procedure

    Directory of Open Access Journals (Sweden)

    P. Centurión

    2011-12-01

    Full Text Available La disponibilidad en el mercado de una gran gama de equipos de láser de diferentes potencias y longitudes de onda para su aplicación en el tejido graso, así como la existencia de diversos trabajos científicos sobre el tema con resultados opuestos, han causado gran confusión y dudas sobre la técnica de láser-lipolisis entre los cirujanos plásticos. Presentamos un protocolo quirúrgico de liposucción con diodo-láser de 980-nm (LSDL 980-nm aplicado en 240 pacientes. Evaluamos la seguridad de la técnica según el índice de complicaciones sufrido, así como la evolución en el post-operatorio de los pacientes tratados. Empleamos un equipo diodo-láser-980 nm (ORlight ®, cuya energía llevamos a través de una fibra de 600 μm. Esto se traduce en la aplicación de 99 J por cada cm² de área tratada, con un espesor de hasta 4 cm de tejido adiposo subcutáneo. No tuvimos complicaciones mayores, tipo quemaduras y entre las complicaciones menores, que fueron de un 48.33 % (116 pacientes, encontramos equímosis mínimas (menos del 2 % de superficie corporal. El tiempo que los pacientes requirieron para controlar el dolor postoperatorio fue de entre 1 y 2 días. Consideramos importante la incorporación de la LSDL-980 nm por ser una técnica menos traumática y con bajo índice de complicaciones, que reduce el periodo de recuperación de los pacientes, provoca una importante retracción de la piel y disminuye el dolor postoperatorio.The availability of multiple laser systems on the market with different power and wavelengths and the existence of several scientific papers with contradictory presents, have created great confusion and doubts among plastic surgeons with regard to the laser lipolysis technique. We report a surgical protocol for liposuction diode laser-980 nm (LSDL-980 nm applied to 240 patients. We evaluate the security of the technique according to the complication rate and the postoperative development of patients submitted to

  10. Modulación Vectorial de Inversores Multinivel con Diodos de Enclavamiento con Balance del Bus de Continua

    Directory of Open Access Journals (Sweden)

    Santiago A. Verne

    2009-04-01

    Full Text Available Resumen: En este trabajo se presenta un algoritmo de modulación para convertidores multinivel de enclavamiento por diodos que optimiza el balance del bus de continua. Se describe el mecanismo de modulación vectorial para convertidores multinivel y se desarrolla un método que permite mantener equilibradas las tensiones del bus de continua utilizando la redundancia del convertidor. El presente algoritmo puede aplicarse a convertidores con un número arbitrario de niveles. Se consideran en el desarrollo dos situaciones prácticas: presencia o ausencia de una fuente de tensión continua sobre el bus. El desempeño del modulador es estudiado mediante simulaciones digitales. Palabras clave: convertidores multinivel, modulación, vector espacial

  11. The effect of soft-laser (diodes radiation on wound healing in cats

    Directory of Open Access Journals (Sweden)

    Julia Maria Matera

    1994-03-01

    Full Text Available Verificou-se o valor do emprego do laser diodo Ga-As-SHLD para auxiliar o processo de cicatrizarão cutânea em felinos. Utilizaram-se 21 animais que foram submetidos à ovariohisterectomia, 9 pertencendo ao grupo controle e 12 submetidos à laserterapia. Os exames anatomopatológicos foram realizados nos dias 2, 4 e 8 de pós-operatório, juntamente com avaliação macroscópica. Concluiu-se que a aplicação do laser diodo Ga-As-SHLD auxiliou o processo cicatricial da ferida cirúrgica por aumento de resistência à tensão.

  12. The effects of different doses of 670 nm diode laser on skin flap survival in rats O efeito de diferentes doses de laser de diodo 670 nm na viabilidade de retalho cutâneo randômico em ratos

    Directory of Open Access Journals (Sweden)

    Cristiano Schiavinato Baldan

    2012-02-01

    Full Text Available PURPOSE: To investigate the effects of different low-level laser therapy (LLLT doses on random skin flap rats. METHODS: Forty Wistar rats were randomly divided in four groups. The control group (CG was not irradiated. The experimental groups were irradiated with a diode laser 670 nm with different energies per point: group 2 (G2 with 0.06 J; group 3 (G3 0.15 J and group 4 (G4 0.57 J. The three groups were irradiated in 12 equally distributed points in the cranial skin flap portion. They were submitted to the irradiation during the immediate, first and second postoperative days. The necrosis area was evaluated in the seventh postoperative day. RESULTS: The CG shows 49.35% of necrosis area in the skin flap; G2, 39.14%; G3, 47.01% and G4, 29.17% respectively. There was a significantly difference when G4 was compared with CG`s skin flap necrosis area. CONCLUSION: The low-level laser therapy diode 670 nm with 0.57 J energy per point increases the survival in randomic skin flap rats.OBJETIVO: Investigar os efeitos de diferentes doses de laserterapia de baixa intensidade na viabilidade de retalhos cutâneos randômicos em ratos. MÉTODOS: Quarenta ratos Wistar foram randomizadamente distribuídos em quatro grupos. O grupo controle (GC não foi irradiado. Os animais dos grupos experimentais foram irradiados por laser de diodo (670 nm com as seguintes energias ofertadas por ponto: grupo 2 (G2 0,06J; grupo 3 (G3 0,15 J e grupo 4 (G4 0,57 J. Os três grupos foram irradiados em 12 pontos igualmente distribuídos na porção cranial do retalho cutâneo. Todos os animais dos grupos 2, 3 e 4 foram submetidos ao protocolo de irradiação por três dias consecutivos, iniciando no pós-operatório imediato. A área necrótica foi avaliada no sétimo dia pós-operatório. RESULTADOS: A porcentagem de área necrótica apresentou-se da seguinte forma, nos diferentes grupos: GC= 49,35%, G2= 39,14%, G3= 47,01 e G4= 29,17%. Foi encontrada diferença estatisticamente

  13. Eficiência do laser diodo 980 nm em comparação à da glicose a 75% na oclusão de veias da orelha de coelhos The efficiency of the diode laser 980 nm compared to glucose 75% in occlusion of the veins in rabbit ears

    Directory of Open Access Journals (Sweden)

    Paulo Roberto da Silva Lima

    2011-06-01

    Full Text Available CONTEXTO: Por ser o laser um método novo no tratamento das varizes, há muitos mitos e dúvidas com relação à sua eficácia; assim, surgiu a necessidade de compará-lo a substância esclerosante mais utilizada em nosso meio (glicose hipertônica. OBJETIVO: Comparar a eficiência do laser diodo 980 nm à glicose 75% na oclusão de veias em orelha de coelho. MÉTODOS: Ensaio aleatório em animais de laboratório por 21 dias. A amostra consistiu de orelhas de coelhos machos adultos. Grupo L (laser: 15 orelhas tratadas com laser; grupo G (glicose 75%: 15 orelhas tratadas com glicose a 75%. Variáveis primárias: veias esclerosadas e/ou ocluídas. Variáveis complementares: volume da substância administrada, complicações e peso. O tamanho da amostra foi estimado em 30 orelhas. Foi realizado o teste exato de Fisher associado ao Risco Relativo (RR, calculando-se o intervalo de confiança (IC de 95% para as variáveis acima. RESULTADOS: A incidência de esclerose ou oclusão venosa no grupo G foi de 53% (8/15; IC95%: 27-79 e no grupo L, 20% (3/15; IC95%: 4-49. O p bicaudal foi de 0,1281, o RR usando a aproximação de Katz foi de 2,66; IC95%: 0,87-8,15. CONCLUSÃO: A eficiência do laser diodo 980 nm em comparação à da glicose 75% na oclusão de veias para o modelo experimental estudado foi equivalente.BACKGROUND: The laser is a new treatment to varicose veins and there is several myths and doubts in relation to its efficacy; then, there is the need to compare it with the most commonly sclerosing solution (hypertonic glucose used in our specialty. OBJECTIVE: To compare the efficiency of the diode laser 980nm to the glucose 75% in the occlusion of veins from the ear of rabbits. METHODS: Aleatory trial in laboratory animals during 21 days. The sample consisted of ears from male adult rabbits. Group L (laser: 15 ears treated with laser; group G (glucose 75%: 15 ears treated with glucose 75%. Primary variables: sclerotic and/or occluded veins

  14. Estudo experimental da aplicação retiniana do laser infravermelho via transescleral sob condições de baixa visibilidade Transscleral infrared laser retinal photocoagulation experimental study under low visibility conditions

    Directory of Open Access Journals (Sweden)

    Dario Grechi Goulart

    2008-06-01

    Full Text Available OBJETIVOS: Pesquisa experimental, com laser de diodo infravermelho, para estimar a segurança, a reprodutibilidade e a permeabilidade da parede ocular à sua atuação clínica, quando aplicado via transescleral, em condições de baixa visibilidade. MÉTODOS: Submetemos olhos de coelhos pigmentados da raça Nova Zelândia à fotocoagulação retiniana por laser de diodo infravermelho. No olho direito, realizamos fotocoagulação via transescleral sob parâmetros de potência e tempo pré-determinados clinicamente. No olho esquerdo, foram repetidos os mesmos valores da potência e tempo usados no olho direito, desta vez, via transpupilar. Imediatamente e após 2 meses, estudos clínicos baseados na retinografia e histopatológicos foram realizados. RESULTADOS: A permeabilidade da parede ocular, quando da aplicação do laser de diodo infravermelho via transescleral, variou entre 58,95 e 63,87%. A média da permeabilidade da parede ocular a 300 mW (63,14% mostrou-se significativamente superior àquela da permeabilidade da parede ocular encontrada a 500 mW (59,11%, (PPURPOSE: Retinal photocoagulation under poor visualization condition is often required. Transscleral infrared laser can be used as an alternative to regular transpupillary treatment. Based upon retinographic measurements, we proposed to estimate the reproducibility as well as ocular wall permeability rate for this treatment. Our primary goal was to evaluate whether this technique can deliver adequate photocoagulation at predetermined parameters without direct retinal visualization. METHODS: In New Zealand pigmented rabbits, optimal transscleral infrared diode laser settings were administered to the right eye. With the same parameters, transpupillary photocoagulation was repeated in the left eye. Retinographic and clinical examinations were performed immediately and two months later. RESULTS: Ocular wall permeability rate varied between 58.95 and 63.87%. Average permeability using a

  15. Fiabilidad de sistemas de iluminación vial y urbana basados en diodos led

    OpenAIRE

    MATEU SALINAS, EDUARD

    2016-01-01

    [ES] Hoy en día los sistemas de iluminación convencionales (constituidos por una lámpara incandescente) han sido sustituidos prácticamente en todas las poblaciones por un disco con varios leds. Esto ha supuesto una notable disminución en el consumo eléctrico de los semáforos. Sin embargo, también se han podido observar algunos fallos (diodos led apagados o parpadeando) que hacen insuficiente la correcta señalización. [EN] The main objective of this work TFG (Trabajo Final de Grado in Spani...

  16. Angulos de conducción de los diodos en los rectificadores de CA con filtro LC

    Directory of Open Access Journals (Sweden)

    Hector S Trujillo Alvarado

    2011-03-01

    Full Text Available En este trabajo se presenta el cálculo de la forma de onda de la corriente en el inductor(iL de un rectificador con filtroLC. El análisis de la forma de onda para niveles medios de corriente en el inductor, esto es, ángulos de conducciónde los diodos menores de 1800 y con efecto apreciable de la energía almacenada en el inductor, no se encontró en laliteratura consultada. La forma de onda es similar a las envolventes de la onda triangular de un regulador conmutadoelevador trabajando como CFP parte del tiempo en operación continua y parte del tiempo en operación discontinua.Para los tiempos de conducción de los diodos se obtiene la ecuación diferencial para la corriente por el inductor, laque se soluciona mediante la transformada de Laplace resultando una ecuación con dos constantes a evaluar M y N.Para tiempos de inicio y fin de la conducción a través de los diodos (ti y tf se iguala a cero iL(t de donde se obtienendos ecuaciones con dos incógnitas función de ti y tf. Igualando a cero la derivada de la corriente iL respecto al tiempoy considerando la descarga del capacitor durante el tiempo de corte de los diodos se obtienen otras dos ecuacioneslas que permiten determinar ti y tf. Con estos valores se evalúan M y N quedando definida iL(t. Debido a lacomplejidad del sistema de ecuaciones, la solución se realiza mediante el programa Mathcad. Los resultados desimulación con PSPICE, teóricos y prácticos concuerdan con buena aproximación.  In this paper, the inductor current (iL waveform of an AC rectifier with LC filter is determined. The analysis ofthis waveform for medium current levels in the inductor was not found in the consulted literature. It is similar tothe envelopes of the triangular signal of a boost switching regulator used as a PFC working part time in thecontinuos regime and part time in the discontinuos regime. For the diodes conduction times a differentialequation for iL(t is obtained and solved through Laplace

  17. Liga NiCrSiBC: Microestrutura e Dureza de Revestimentos Processados a Arco e a Laser

    Directory of Open Access Journals (Sweden)

    Leandro J. da Silva

    2015-03-01

    Full Text Available A técnica de processamento é determinante sobre características de um revestimento. Isso porque o aporte térmico, que depende da técnica e dos parâmetros, tem influência sobre a diluição e a taxa de solidificação. Em ligas com baixa complexidade metalúrgica, o impacto do processamento com técnicas de deposição que impõem maior taxa de resfriamento podem se traduzir em refino da microestrutura. Espera-se que quanto mais refinada a microestrutura maior a resistência mecânica do revestimento. Entretanto, na deposição de ligas de maior complexidade metalúrgica isso nem sempre ocorre, porque a elevada taxa de resfriamento pode suprimir formação/precipitação de fases responsáveis pela resistência. Neste estudo, a influência do processamento sobre microestrutura e dureza de revestimentos da liga Colmonoy-6® foi avaliada. A liga foi processada por plasma com arco transferido (PTA e laser de diodo de alta potência (HPDL sobre chapas de AISI 304 com dois níveis de diluição. Em ambos os casos, revestimentos de boa qualidade e livres defeitos foram obtidos. O aumento do teor de Fe (diluição e as diferentes taxas de resfriamento decorrem do processamento com diferentes parâmetros e técnicas. Em consequência, ocorrem mudanças significativas na microestrutura e na dureza dos revestimentos que estão associadas à distribuição, morfologia e composição química dos carbonetos e, principalmente, dos boretos.

  18. Investigation of diode-laser pumped thulium-doped fluoride lasers; Investigacao de lasers de floureto dopados com tulio e bombeados por diodo-laser

    Energy Technology Data Exchange (ETDEWEB)

    Matos, Paulo Sergio Fabris de

    2006-07-01

    Tunable lasers emitting around 2.3 mum region are important in many areas, like gas detection, remote sensing and medical applications. Thulium has a large emission spectra around 2.3 mum with demonstrated tuning range of 2.2-2.45 mum using the YLF host. For efficient pump absorption, a high concentration sensitizer like ytterbium can be used. We demonstrate quasi-cw operation of the Yb:Tm:YLF laser, pumped at 960 nm with a 20 W diode bar achieving the highest output power reported so far of 620 mW. Simultaneous pumping of the 2.3 mm Yb:Tm:YLF laser at 685 nm and 960 nm is demonstrated, showing higher slope efficiency than 960 nm alone. Numerical simulations and analytical models show the best ratio of pump power between both wavelengths. (author)

  19. Influence of ingaalp laser (660nm on the healing of skin wounds in diabetic rats Influência do laser ingaalp (660nm na cicatrização de feridas cutâneas em ratos diabéticos

    Directory of Open Access Journals (Sweden)

    Paulo de Tarso Camillo de Carvalho

    2010-02-01

    Full Text Available PURPOSE: To determine the influence of low-power laser (660 nm on the collagen percentage and macrophages in skin wounds in diabetic rats. METHODS: 30 male Wistar rats were used, distributed in two groups: laser treated diabetic (n= 15; untreated diabetic (n = 15. The diabetes was induced by intravenous injection of alloxan into the dorsal vein of the penis, at a rate of 0.1 ml of solution per 100 g of body weight. A wound was made on the back of all the animals. Groups 2 were treated with Aluminium Gallium Indium Phosphide - InGaAlP type diode laser (Photon Laser III DMC® with a continuous output power of 100 mW and wavelength (? of 660 nm (4 J/cm² for 24 s. five animal from each group was sacrificed on the 3rd, 7th and 14th days after wounding. Samples were taken, embedded in paraffin, stained with hematoxylin-eosin, Masson's trichrome, and immunohistochemical macrophage. morphometrically analyzed using the Image Pro Plus 4.5 software. The percentages of collagen fibers and macrophages were determined from the samples from the euthanasia animals. RESULTS: The data were treated statistically using analysis of variance (ANOVA and the Post-hocTukey test. The significance level was set at 0.05 or 5%. CONCLUSION: The low-power laser (660 nm was shown to be capable of influencing the collagen percentage in skin wounds by increasing the mean quantity of collagen fibers and macrophages.OBJETIVO: Determinar a influência do diodo laser InGaAlP (660 nm sobre o percentual de colágeno e macrófagos em feridas cutâneas de ratos diabéticos. MÉTODOS: Para tanto 30 ratos machos Wistar foram distribuídos em dois grupos: diabético tratado com laser (n=15, diabético não tratado (n = 15. O diabetes foi induzido por injeção intravenosa de aloxana na veia dorsal do pênis, a uma taxa de 0,1 ml de solução por 100 g de peso corporal. A lesão foi confeccionada no dorso de todos os animais utilizando um punch de 8mm. 2 grupos foram tratados com o diodo

  20. Desarrollo de una interfaz gráfica para un sistema electrónico de caracterización óptica de diodos emisores de luz

    OpenAIRE

    Colino Barrigón, Juan José

    2015-01-01

    En este Trabajo de Fin de Grado (TFG) se describe el proceso de análisis, diseño y desarrollo de una interfaz gráfica para un sistema de caracterización óptica de diodos emisores de luz (LED del inglés Light-emitting diode). La interfaz ha sido implementada en Python usando la librería gráfica GTK+3 para Linux. Grado en Ingeniería Informática

  1. In vitro study of the diode laser effect on artificial demineralized surface of human dental enamel; Estudo in vitro do efeito do laser diodo sobre a superficie de esmalte dental humano desmineralizado artificialmente

    Energy Technology Data Exchange (ETDEWEB)

    Ebel, Patricia

    2003-07-01

    In scientific literature there are many reports about fusion and resolidification of dental enamel after laser irradiation and their capability to generate surfaces with increased resistance to demineralization compared to non-irradiated areas. The use of high power diode laser on demineralized surfaces of human dental enamel is presented as a good alternative in caries prevention. The purpose of this study is to investigate the morphological changes produced by the use of one high power diode laser on human dental enamel surface after demineralization treatment with lactic acid, under chosen parameters. Fifteen samples of human dental molars were used and divided in four groups: control - demineralization treatment with lactic acid and no irradiation, and demineralization treatment with lactic acid followed of irradiation with 212,20 mJ/cm{sup 2}, 282,84 mJ/cm{sup 2} and 325,38 mJ/cm{sup 2}, respectively. The samples were irradiated with high power diode laser (808 nm) with a 300 {mu}m diameter fiber optics. Black ink was used on enamel surface to enhance the superficial absorption. The samples were studied by optical microscopy and scanning electron microscopy. Modifications on the enamel surfaces were observed. Such modifications were characterized by melted and re-solidified region of the enamel. According with our results the best parameter was 2.0 W, presenting the most uniform surface. The use of high power diode laser as demonstrated in this study is able to promote melting and re-solidification on human dental enamel. (author)

  2. Phototoxic action of light emitting diode in the in vitro viability of Trichophyton rubrum Ação fototóxica do diodo emissor de luz na viabilidade de Trichophyton rubrum in vitro

    Directory of Open Access Journals (Sweden)

    José Cláudio Faria Amorim

    2012-04-01

    ão são capazes de alcançar o leito ungueal em concentrações terapêuticas, antifúngicos sistêmicos que não erradicam o fungo antes das unhas serem renovadas, efeitos colaterais graves e seleção de isolados fúngicos resistentes. A terapia fotodinâmica tem sido uma alternativa promissora aos tratamentos convencionais. OBJETIVOS: Este estudo avaliou a eficácia, in vitro, de azul de orto-toluidina irradiado por diodo emissor de luz na redução da viabilidade de T. rubrum. MÉTODOS: O inóculo fúngico foi preparado e exposto a diferentes concentrações de azul de orto-toluidina e densidades de energia do diodo emissor de luz, para avaliar a sensibilidade de T. rubrum e o efeito fungicida, após terapia fotodinâmica. Além disso, os perfis da área e volume das suspensões fúngicas irradiados também foram investigados. RESULTADOS: Uma pequena redução, in vitro, de células fúngicas foi observada após a exposição a 100 mM azul de orto-toluidina irradiados por diodo emissor de luz a 18 J/cm². Efeito fungicida ocorreu após irradiação 25 µM orto-toluidina por diodo emissor de luz com densidade de energia de 72 J/cm². A análise mostrou que a área e o volume irradiados pelo diodo emissor de luz foram 52,2 mm² e 413,70 mm³, respectivamente. CONCLUSÕES: Os resultados permitiram concluir que a terapia fotodinâmica com diodo emissor de luz, nas condições experimentais é uma abordagem alternativa para inibir, in vitro, T. rubrum e pode ser um tratamento promissor para as dermatofitoses causadas por este fungo.

  3. Bone tissue microscopic findings related to the use of diode laser (830etam in ovine mandible submitted to distraction osteogenesis Achados microscópicos no tecido ósseo relacionados à utilização do laser diodo (830etam em mandíbulas de ovelhas submetidas à distração osteogênica

    Directory of Open Access Journals (Sweden)

    Arlei Cerqueira

    2007-04-01

    Full Text Available PURPOSE: To analyze the microscopic characteristics of the effect of Gallium-Aluminum Arsenid diode laser (GaAlAs - 830etam applied during the activation and consolidation period to ovine mandibles submitted to distraction osteogenesis. METHODS: Eighteen sheep underwent surgery in order to have bone distractors implanted in the left side of the jaw area. They were divided into three groups: 1 - Control; 2 - Laser irradiation during the activation period; 3 - Laser irradiation during the fixation period. The irradiation was carried out in five sessions, on every other day, with 4,0J/cm² doses applied to four pre-established areas, totaling 16J per session. After four days of latency under post-operative care, ten days of distractor activation (at 1mm/day and twenty-one days of fixation the animals were sacrificed and the devices removed for microscopic analysis. RESULTS: The groups that received laser irradiation (GaAlAs presented a greater amount of mineralized bone trabeculae when compared to the Control Group. Despite that, cartilaginous tissues were also found in Group 2. CONCLUSION: The laser has been more favorable when used in the consolidation period, after bone elongation.OBJETIVO: Avaliar as características microscópicas do efeito do laser diodo de Arsenieto de Gálio-Alumínio (AsGaAl - 830etam, aplicado no período de ativação e consolidação de mandíbulas de ovelhas submetidas a distração osteogênica. MÉTODOS: Dezoito ovinos foram submetidos a procedimento cirúrgico para colocação de distrator ósseo em região de mandíbula do lado esquerdo, sendo divididos em três grupos: 1 - Controle; 2 - Irradiação de laser no período de ativação; 3 - Irradiação de laser no período de contenção. As irradiações foram feitas em cinco seções em dias alternados, com doses de 4,0J/cm² em quatro pontos pré-determinados, somando 16J por seção. Após quatro dias de latência no pós-operatório, 10 dias de ativação do

  4. Diseño y fabricación de un sistema electrónico para la caracterización óptica de diodos emisores de luz

    OpenAIRE

    Fernández Lucas, Jorge

    2015-01-01

    El propósito de este Trabajo Fin de Grado es el diseño y construcción de un sistema para automatizar la caracterización óptica de diodos emisores de luz. La realización se llevará a cabo mediante un monocromador controlado por una aplicación software que gestiona el movimiento del motor paso a paso, incluido en el monocromador, y un fotodiodo que mide la intensidad de luz que atraviesa el monocromador. Grado en Ingeniería de Tecnologías de Telecomunicación

  5. Action of diode laser (830 nm) on cutaneous wound healing process: biometrical and histological study in rats; Acao do diodo laser emitindo em 830 nm, sobre o processo de cicatrizacao de lesoes cutaneas: estudo biometrico e histologico em ratos

    Energy Technology Data Exchange (ETDEWEB)

    Rezende, Sandra Bastos

    2001-07-01

    In this research, it was analyzed the acceleration of the healing process of cutaneous lesions in mice, using a diode laser emitting in 830 nm. The 64 selected animals in this study were randomically divided into four groups of 16 animals each (G1, G2, G3 and G4). Biometric and histological comparisons were accomplished in the following periods: 3, 7 and 14 days after the surgery and laser application. Three laser irradiation configurations were used: a punctual contact (G2) and two non-contact and uniform (G3 and G4). For group G2, the laser intensity was 428 mW/cm{sup 2} , and for groups G3 and G4 it was 53 mW/cm{sup 2}. The total doses were D = 3 J/cm{sup 2} for groups G2 and G4, and D = 1,3 J/cm{sup 2} for G3. The first group, G1, was considered control and thus not submitted to any treatment after the surgery. All irradiated lesions presented acceleration of the healing process with regard to the control group. However, our results clearly indicate that the smaller laser intensity (uniform irradiation) leaded to the best results. On the other hand, the smaller used dose also leaded to the more significant and expressive results. The combination of the intensity value of 53 mW/cm{sup 2} and the dose of 1,3 J/cm{sup 2} leaded to optimal results, regarding the Biometric and histological analysis, presenting faster lesion contraction, quicker neoformation of epithelial and conjunctive tissue (with more collagen fibers ). (author)

  6. Aplicación del láser de diodo para la soldadura en tailored blanks

    Directory of Open Access Journals (Sweden)

    Bocos, J. L.

    2004-04-01

    Full Text Available During the last years, one of the most interesting subjects in the automotive industry is the weight reduction of the automobile, and so to diminish the fuel consumption. Among other performances, the use in the body car of materials which have high mechanical resistance must be considered for the weight reduction of the automobile and maintaining high benefits. In this work, it has been studied the utilization of the diode laser for high resistance steel sheets welding, concretely microalloying steels (ZStE, DP "dual phase" and TRIP "transformation induced plasticity". These steels can be employed in "tailored blanks", which are defined as two or more separate pieces of flat material of dissimilar thickness and/or physical properties joined together before forming, to provide superior qualities in the finished stamped part. In this study, the metallographic characterization has been realised in the welding seams; and the mechanical behaviour has been analysed employing the following tests: microhardness, drawing, tensile and fatigue.

    Uno de los puntos de mayor interés para la industria de la automoción, en los últimos años, es la reducción en peso del automóvil y conseguir, con ello, rebajar el consumo de combustible. Disminuir el peso del automóvil y mantener unas elevadas prestaciones implica, entre otras actuaciones, la utilización de materiales en la carrocería que posean una elevada resistencia mecánica. En este trabajo se presenta el estudio de la viabilidad de la utilización del láser de diodo para la soldadura de chapas de acero de alta resistencia; concretamente de aceros ferríticos microaleados (ZStE, DP (dual phase y TRIP (transformation induced plasticity. Todos ellos, son materiales que pueden formar parte de tailored blanks que se definen como piezas constituidas por la unión, mediante soldadura, de chapas de acero de distintas calidades y espesores. En este estudio se ha profundizado en

  7. Dimensional characteristics of welds performed on AISI 1045 steel by means of the application of high power diode laser; Caracteristicas dimensionales de soldadura formadas sobre el acero AISI 1045 mediante la aplicacion del laser diodo de alta potencia

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez-Castillo, A.; Pou, J.; Lusquinos, F.; Quintero, F.; Soto, R.; Boutinguiza, M.; Saavedra, M.; Perez-Amor, M.

    2004-07-01

    The named High Power diode Laser (HPDL), emits a beam of optical energy generated by diode stimulation and offers the capability of supplying levels of power up to 6 kW. The objective of this research work was to study the main welding variables and their effects on dimensional characteristics of the beads performed by means of application of this novel laser. The results obtained, show that HPDL, is an energy source able to perform welds on AISI 1045 steel plates under conduction mode, without any kind of mechanized preparation, preheating or post-weld treatment and, without filler metal application. (Author) 16 refs.

  8. Experimental model for low level laser therapy on ischemic random skin flap in rats Modelo experimental para laserterapia de baixa intensidade em retalho cutâneo randômico isquêmico em ratos

    Directory of Open Access Journals (Sweden)

    Rodrigo Paschoal Prado

    2006-08-01

    Full Text Available PURPOSE: To develop an experimental model to be used in the study of low level Laser therapy on viability of random skin flap in rats. METHODS: The sample was 24 Wistar-EPM rats. The random skin flap measured 10 x 4 cm and a plastic sheet was interposed between the flap and donor site. Group 1 (control underwent sham irradiation with diode laser (830 nm. Group 2 was submitted to laser irradiation with diode laser (830 nm. The animals were submitted to Laser therapy with 36 J/cm² energy density (72 seconds immediately after the surgery and on the four subsequent days. The probe was usually held in contact with the skin flap surface on a point at 2.5 cm cranial from the flap base. On the seventh postoperative day, the percentage of necrotic area was measured and calculated. RESULTS: Group 1 reached an average necrotic area of 48.86%, Group 2 - 23.14%. After the statistic analysis, compared with the control group, Group 2 showed a statistically significant increase in survival area (pOBJETIVO: Propor o desenvolvimento de um modelo experimental para verificar o efeito da laserterapia de baixa intensidade na viabilidade do retalho cutâneo randômico em ratos. MÉTODOS: A amostra constituiu-se de 24 ratos, da linhagem Wistar-EPM. O retalho cutâneo randômico foi realizado com dimensões de 10x4 cm e uma barreira plástica foi interposta entre o mesmo e o leito doador. O Grupo 1 (controle, foi submetido a uma simulação de tratamento com a irradiação laser de diodo (830 nm. O Grupo 2 foi submetido à irradiação laser de diodo (830 nm. Os animais foram submetidos a terapia a laser com densidade de energia de 36 J/cm2 (72 segundos imediatamente após a operação e nos outros quatros dias subseqüentes. A caneta do laser foi posicionada a 90 graus em contato com o retalho cutâneo em um ponto a 2,5 cm da base cranial do retalho. No sétimo dia pós-operatório foram calculadas as porcentagens da área de necrose. RESULTADOS: O Grupo 1 apresentou

  9. Effectiveness of composite resin polymerization using light-emitting diodes (LEDs or halogen-based light-curing units Efetividade de polimerização de uma resina composta fotopolimerizada por diodos emissores de luz (LEDs ou luz halógena

    Directory of Open Access Journals (Sweden)

    Bianca Micali

    2004-09-01

    Full Text Available The clinical performance of composite resins is greatly influenced by the quality of the light-curing unit used. The aim of this study was to compare the efficiency of a commercial light-emitting diode (LED with that of a halogen-based light-curing unit by means of dye penetration of a micro hybrid composite resin. The composite resin evaluated was Filtek Z250 (3M Dental. The composite was filled into acrylic moulds that were randomly polymerized for 40 seconds by each of the light-emitting systems: light-emitting diode Ultraled (Dabi Atlante or halogen light Degulux (Degussa Hüls curing units. Immediately after polymerization, each specimen was individually immersed in 1 ml of 2% methylene blue solution at 37°C ± 2°C. After 24 hours, the specimens were rinsed under running distilled water for 1 minute and stored at 37°C ± 2°C at relative humidity for 24 hours. The composite resins were removed from the moulds and individually triturated before being immersed in new test tubes containing 1 ml of absolute alcohol for 24 hours. The solutions were filtered and centrifuged for 3 minutes at 4,000 rpm and the supernatant was used to determine absorbance in a spectrophotometer at 590 nm. To verify the differences between groups polymerized by LED or halogen light t-test was applied. No significant differences were found between composite resins light-cured by LED or halogen light-curing unit (p > 0.05. The commercially LED-based light-curing unit is as effective to polymerize hybrid composite resins as the halogen-based unit.A longevidade clínica das resinas compostas é grandemente influenciada pela qualidade do aparelho fotopolimerizador utilizado. O objetivo deste trabalho foi comparar a eficácia de um aparelho fotopolimerizador de diodos emissores de luz e a de um de luz halógena através do grau de penetração de um corante em uma resina composta micro-híbrida. A resina composta utilizada (Filtek Z250/3M Dental foi inserida em matrizes

  10. Healing activity of laser InGaAlP (660nm in rats Atividade cicatrizante do laser AlGaInP (660nm em ratos

    Directory of Open Access Journals (Sweden)

    Kelly Cristina Borges Tacon

    2011-10-01

    Full Text Available PURPOSE: To evaluate the effect the healing activity of diode laser Indium Gallium Aluminum Phosphorus (InGaAlP ë660nm on healing of surgical wounds in rats. METHODS: Fifty-four female Wistar rats were used, divided into three groups (n=18 and subdivided into three subgroups (n=6 to be studied in 5, 10 and 15th days after surgical procedures. The wound was induced in the dorsal-cervical using punch. The lesions were irradiated on alternate days with InGaAlP laser, the energy densities of 3J/cm² (L3 or 6J/cm² (L6. The control group received no irradiation. At 5, 10 and 15th days after surgery the animals were euthanized and the repair area was removed and histological sections were stained with hematoxylin-eosin and picrossírius. We evaluated macroscopic and histological lesions in the times cited, as well as morphometric analysis of angiogenesis and collagen content. RESULTS: The wound healing activity InGaAlP laser was evidenced by increased angiogenesis group L3 and L6 in relation to control group (CG at the 5th day (p=0.0001 and decreased polymorphonuclear infiltrate and hemorrhage (p=0.045 and p=0.07 respectively in the groups L3 and L6 in relation to control group (GC. On the 10 and 15th days was also observed in groups treated with laser L3 and L6 stimulation was pronounced fibroplasia (p=0.0003 and p=0.034 respectively when compared with the control group (CG. CONCLUSION: The InGaAlP laser acted positively on the healing of skin wounds in rats.OBJETIVO: Avaliar a atividade cicatrizante do laser diodo Alumínio Gálio Índio Fósforo (AlGaInP, ë660nm em feridas cutâneas induzida em ratos. MÉTODOS: Foram utilizados 54 ratos Wistar, fêmeas, divididos em três grupos (n=18 e subdivididos em três subgrupos (n=6 animais para serem estudados no 5, 10 e 15º dias após o procedimento cirúrgico. A ferida foi induzida em região dorso-cervical utilizando punch. As lesões foram irradiadas em dias alternados com laser AlGaInP, nas

  11. Evaluation of the morphological alteration of the root surface radiated with a diode laser; Avaliacao da alteracao morfologica da superficie cimentaria irradiada com laser de diodo

    Energy Technology Data Exchange (ETDEWEB)

    Gulin, Mauricio

    2003-07-01

    The diode laser has been studied for periodontal therapy, as much for removal of calculus as for microbial reduction of periodontal pockets, as well as the visible analgesic effects and biomodulation capacity. For this reason the purpose of this study was to evaluate the morphological alteration of the root surface after radiation with the diode laser, 808 nm through analysis by scanning electron microscopy (SEM). Besides this, to verify the temperature variations caused during the radiation, a thermometer put into the dentinal wall of the root canal was used. In all, 18 teeth were used, 15 of which for the SEM study, and the other 3 were used to temperature variation analysis. The 25 samples were scraped on the root surface and planed with manual instruments. The other 5 were not subjected to any type of treatment. This, 6 groups of 5 samples each were formed. Control Group C whose samples had not received any treatment; Control Group C 1 was only scraped and polished conventionally with Hu-Friedy Gracey curettes 5 and 6; the other samples groups L1, L2, L3, L4 were radiated by diode laser using parameters of power 1,0 W; 1,2 W; 1,4 W; and 1,6 W respectively, 2 times for 10 seconds with 20 seconds intervals between each radiation in continuous mode. The results with relation to the increase of temperature in the interior of the root canal demonstrated that there was an increase of more than 5 degree Celsius. The results of the scanning electron microscope analysis of Control Group C demonstrated great irregularity and ridges on the root surface, with the presence of a dentine layer. Control Group C1 presented a similar aspect to Group L 1's, smoother and more homogeneous surface. Groups L2, L3, and L4 presented scratches alternating with smoother areas showing that fiber contacted the surface of the sample. The results reconfirmed the necessity of further studies using diode laser, with a beam of light emitted in an interrupted mode to improve the control of the

  12. Evaluation of the morphological alteration of the root surface radiated with a diode laser; Avaliacao da alteracao morfologica da superficie cimentaria irradiada com laser de diodo

    Energy Technology Data Exchange (ETDEWEB)

    Gulin, Mauricio

    2003-07-01

    The diode laser has been studied for periodontal therapy, as much for removal of calculus as for microbial reduction of periodontal pockets, as well as the visible analgesic effects and biomodulation capacity. For this reason the purpose of this study was to evaluate the morphological alteration of the root surface after radiation with the diode laser, 808 nm through analysis by scanning electron microscopy (SEM). Besides this, to verify the temperature variations caused during the radiation, a thermometer put into the dentinal wall of the root canal was used. In all, 18 teeth were used, 15 of which for the SEM study, and the other 3 were used to temperature variation analysis. The 25 samples were scraped on the root surface and planed with manual instruments. The other 5 were not subjected to any type of treatment. This, 6 groups of 5 samples each were formed. Control Group C whose samples had not received any treatment; Control Group C 1 was only scraped and polished conventionally with Hu-Friedy Gracey curettes 5 and 6; the other samples groups L1, L2, L3, L4 were radiated by diode laser using parameters of power 1,0 W; 1,2 W; 1,4 W; and 1,6 W respectively, 2 times for 10 seconds with 20 seconds intervals between each radiation in continuous mode. The results with relation to the increase of temperature in the interior of the root canal demonstrated that there was an increase of more than 5 degree Celsius. The results of the scanning electron microscope analysis of Control Group C demonstrated great irregularity and ridges on the root surface, with the presence of a dentine layer. Control Group C1 presented a similar aspect to Group L 1's, smoother and more homogeneous surface. Groups L2, L3, and L4 presented scratches alternating with smoother areas showing that fiber contacted the surface of the sample. The results reconfirmed the necessity of further studies using diode laser, with a beam of light emitted in an interrupted mode to improve the control of

  13. 'In vitro' study of the efficacy of diode laser and LED irradiation during dental bleaching; Estudo 'in vitro' da acao do LED e laser de diodo no clareamento dental

    Energy Technology Data Exchange (ETDEWEB)

    Barroso, Marcia Cristina da Silva

    2003-07-01

    This in vitro study evaluated the efficacy of LED and laser diode irradiation during the dental bleaching procedure, using two bleaching agents (Opalescence X-tra and HP Whiteness). The diode laser and the LED were operated in the continuous mode, with wavelength of 808 nm and 470 nm, respectively. The results of the irradiations were characterized with the CIELAB system calculating the L{sup *}a{sup *}b{sup *} values for the darkened and the bleached teeth (60 bovine incisors). This is to our knowledge the first time that light sources laser and LED are compared with respect to their whitening capability when applied to different agents. Significant differences in the chroma value are obtained for the two whitening agents and for the different light sources, too. Also, in terms of luminance, the combination of laser/ Whiteness HP showed significantly better results than when the same agent was used alone or in combination with LED. Best overall results are obtained with the combination of Whiteness HP and laser. (author)

  14. Assessment of the bacteria reduction in the infected root canal irradiated with diode laser; Avaliacao da reducao bacteriana em conduto radicular infectado e irradiado com laser de diodo. Estudo in vitro

    Energy Technology Data Exchange (ETDEWEB)

    Radaelli, Claudia Amaral Rabello de Mello

    2002-07-01

    High success rates are achieved in conventional endodontic treatment of vital pulp teeth. However, in cases of non-vital pulp, a decrease in the rate of success occurs due to difficulties in achieving a complete disinfection of the root canals system. Some bacteria, such as Enterococcus faecalis, are frequently found in cases of endodontic treatment failure due to their high resistance to the conventional endodontic treatment. The aim of this study was to evaluate the efficiency of a high power diode laser irradiation in bacterial reduction of contaminated canals associated with dressing compose by calcium hydroxide paste propylene glycol and camphorated paramonochlorophenol. Eighty-two root canals were infected in vitro with Enterococcus faecalis in a concentration of 1x10{sup 8} CFU/ml. Specimens were high intensity irradiated with a diode laser model Opus 10, at a wavelength of 830 nm. Two different parameters were employed in continuous mode: 3 W and 2,5 W with a 360 {mu}m optical fiber at an angle of approximately 5 degrees respect to the dentine surface during 5 seconds, in 4 applications, with 20 seconds intervals among them. After these proceedings specimens were vortexed in peptone water and dilutions performed. Aliquots of the dilution were plated on m-Enterococcus agar, incubated, and the Colonies Forming Units (CFU) of ali groups was counted. The results showed a significant reduction of bacteria on ali groups after laser irradiation. A high reduction rate was achieved: 98.5% immediately after the laser irradiation; 48 hours after, the reduction was of 96,73% and, finally, a 100% reduction was achieved through the combination of laser irradiation and a long lasting dressing of calcium hydroxide paste, propylene glycol and camphorated paramonochlorophenol. High rates of bacteria reduction were achieved using the parameter of 3 W in continuous mode with the power of 2,9473 KW/cm{sup 2}. The temperature was monitored with a K-pipe thermocouple placed at

  15. Efeitos do laser de baixa potência sobre a dor e edema no trauma tendíneo de ratos Effects of the low level laser over pain and edema in tendon trauma of rats

    Directory of Open Access Journals (Sweden)

    Gladson Ricardo Flor Bertolini

    2008-08-01

    Full Text Available A dor e o edema são sinais, entre outros, que ocorrem durante a fase inflamatória no processo de cura de tendões lesados. A terapia antiinflamatória farmacológica recebe algumas críticas, com relação a seus efeitos deletérios para o reparo. Dessa forma, ganha corpo o uso de recursos físicos para o controle do processo. O objetivo do presente estudo foi avaliar o uso do laser de baixa potência sobre a dor e edema em tendão calcâneo de ratos submetidos a trauma experimental. Foram utilizados 28 ratos Wistar, divididos em quatro grupos: GC - submetido à lesão traumática e ao tratamento placebo; G2 - submetido à lesão e irradiado com laser 2J/cm²; G4 - submetido à lesão e irradiado com 4J/cm²; G8 - submetido à lesão e irradiado com 8J/cm². A lesão foi realizada com a queda de um peso sobre a face lateral do tendão calcâneo direito de cada animal, com energia de aproximadamente 0,40J. A dor foi avaliada pelo tempo de elevação da pata (TEP do animal caminhando durante um minuto, sobre um cilindro metálico com 30cm de diâmetro em 3rpm; a avaliação do edema ocorreu através de paquimetria; os momentos de avaliação foram: pré-lesão, pós-lesão, pós-tratamento, duas horas, oito horas, 24 horas e 5º dia de lesão. O tratamento com laser 670nm ocorreu de forma pontual e diária. Os resultados mostraram aumentos do TEP e formação de edema em todos os grupos após a lesão; para os grupos tratados houve redução da dor e do edema, fato observado no grupo controle apenas com relação à diminuição de edema no 5º dia de placebo. Conclui-se que o tratamento com laser de baixa potência diminuiu dor e edema nos animais com trauma tendíneo, de forma dose-dependente.During the injured tendons healing process there is the inflammatory phase, which occurs in the presence, among other signs, of pain and edema. The antiinflammatory drug therapy receives some criticism, with respect to its deleterious effects for the

  16. Influence of ionizing irradiation on the antioxidant enzymes of Vicia faba L.

    Directory of Open Access Journals (Sweden)

    El-Beltagi, Hossam E. S.

    2010-09-01

    Full Text Available The seeds of Vicia faba L. Giza 834 were exposed to γ-irradiation at dose levels of 2.5, 5.0, 10.0 and 20.0 kGy and after that exposed to He–Ne (632.8 nm or diode (650.0 nm laser irradiation for 5 min. The activities of POD, APOX, CAT, SOD and GST enzymes were significantly stimulated and this stimulation reached its maximum at a dose level of 5.0 kGy for enzymes POD, APOX, CAT and SOD, but for GST enzyme at a dose level 10.0 kGy. For He- Ne laser, with or without different doses (2.5, 5.0, 10.0 and 20.0 kGy of γ-irradiation, enzyme induction was significantly stimulated and positively correlated with the dose levels of γ-irradiation in combination with the He-Ne treatment. There was a significant increase in the concentration of MDA and this increase was more pronounced at dose level 20.0 kGy (38.2 μmol/g d.w compared to the control (3.9 μmol/g d.w. Laser treatment by He–Ne laser or diode laser only caused a slight increase (P 2O2 content significantly increased in all treatments and this increase reached its maximum at dose level 20.0 kGy (36.3 μmol/g d.w compared to the control (2.3 μmol/g d.w.. On the other hand, He-Ne or diode laser treatments combined with γ-irradiation significantly decreased in comparison with γ-irradiation treatments alone. In the case of glutathione content, there were significant increases by γ-irradiation at dose levels 2.5, 5.0, 10.0 and 20.0 kGy. Furthermore, with a combination of γ-irradiation and He-Ne or diode laser, a marked increase in glutathione content was found and was more pronounced than that of gamma irradiation alone.Semillas de Vicia faba L. Giza 834 fueron expuestas a γ-irradiación a dosis de 2.5, 5.0, 10.0 y 20.0 kGy y después expuesta a una radiación laser de He–Ne (632.8 nm o de diodo (650.0 nm durante 5 minutos. Las actividades de las enzimas POD, APOX, CAT, SOD y GST fueron favorecidas significativamente, y éstas alcanzaron un máximo a una dosis de 5.0 kGy para las enzimas

  17. VIDRIADO CON LÁSER DE Nd: YAG SOBRE AZULEJOS RECUBIERTOS DE BARNICES DE COBALTO CON FRITA BORÁCICA Y SIN FRITA VIDRADO COM Laser De Nd: YAG SOBRE AZULEJOS RECOBERTOS DE VERNIZES DE COBALTO COM FRITA BORÁCICA E SEM FRITA Nd: YAG LASER ENAMELING ON GLAZED TILES COATED WITH COBALT VARNISHES WITH AND WITHOUT BORAX FRIT

    Directory of Open Access Journals (Sweden)

    Maryory Astrid Gómez

    2010-07-01

    Full Text Available Las industrias de materiales cerámicos y arquitectónicos emplean diferentes técnicas de marcado con dos aplicaciones clásicas, para identificación y decoración de piezas elaboradas. La utilización de técnicas láser para estos propósitos se viene implementando de forma creciente, debido a las ventajas que presenta respecto al horneado convencional: la concentración del calor sólo en la zona irradiada, lo que conlleva un menor consumo de energía sin afectar significativamente el resto de la pieza; se obtienen patrones gráficos de alta resolución espacial; permite introducir cambios durante el proceso sin requerir largas paradas, y la generación de residuos es mínima o casi nula. En este estudio se presentan los resultados obtenidos en el vidriado con láser Nd:YAG (l=1064 nm sobre las superficies esmaltadas de azulejos, las cuales fueron previamente recubiertas con pigmento cerámico negro de cobalto y un barniz constituido por este mismo pigmento y frita borácica. Con el láser operando en modo continuo (CW, se marcaron una serie de líneas, cuyo ancho y profundidad evidenciaron una dependencia directa, con la variación de la potencia y velocidad de desplazamiento del haz láser sobre la superficie del azulejo. Finalmente estas líneas vidriadas fueron analizadas por microscopía óptica, espectroscopia de dispersión de energía (EDS y difracción de rayos X.As indústrias de materiais cerâmicos e arquitetônicos empregam diferentes técnicas de marcado com duas aplicações clássicas, para identificação e decorações de peças elaboradas. A utilização de técnicas laser para estes propósitos se vem executando de forma crescente, devido às vantagens que apresenta respeito ao assado convencional: concentração do calor só na zona irradiada, o que comporta um menor consumo de energia sem afetar significativamente o resto da peça; obtêm-se patrões gráficos de alta resolução espacial; permite introduzir mudan

  18. SINTESIS, CARACTERIZACION Y ELECTRO-OXIDACION DE 2,2- DITIENIL DERIVADOS, EFECTO DE LA FUNCIONALIZACION SOBRE LAS PROPIEDADES ELECTRICAS

    OpenAIRE

    BROVELLI SEPULVEDA, FRANCISCO ANTONIO

    2002-01-01

    Desde el descubrimiento de la conducción eléctrica en sistemas poliméricos, se han realizado muchos esfuerzos con el propósito de mejorar tanto la conductividad como la resistencia mecánica de estos materiales, sin embargo, en la última década, se ha manifestado un gran interés por los sistemas semiconductores para el desarrollo de nuevos dispositivos, como por ejemplo, diodos emisores de luz (OLED). Debido a la versatilidad estructural que presentan los polímeras, se ha propuesto la sí...

  19. Análisis de estabilidad de una línea de transmisión con carga no lineal

    OpenAIRE

    Rodríguez Lozoya, Rito Javier

    2006-01-01

    El propósito de este trabajo es presentar un estudio sobre la estabilidad de una línea de transmisión con carga no lineal, en dos modalidades, la primera como una línea con parámetros concentrados y la segunda como una línea con parámetros distribuidos. Para ambos casos se utiliza la misma carga, un diodo tunel, ya que por sus características de ser un oscilador no lineal con múltiples puntos de equilibrio, representa un buen ejemplo para simular una carga no lineal en un...

  20. Evaluation of the hydrogen peroxide and special colorant effects under irradiation by argon and diode laser on tooth-whitening in vitro; Avaliacao do efeito de corantes especiais e peroxido de hidrogenio irradiados por laser de argonio e laser de diodo no clareamento dental 'in vitro'

    Energy Technology Data Exchange (ETDEWEB)

    Gaspar, Jose Antonio

    2003-07-01

    The aim of this study is to determine if there is any interaction between special colorant found on bleaching agents that have 35 % of hydrogen peroxide on its composition, and argon or diode laser. The first part of the study was to characterize the extrinsic stain obtained through a staining solution containing products present on the day by day diet of the general population. Thirty-two inferior human extracted incisors, free of caries and without filling material were selected for the study. The laser devices employed were Argon laser (AccuCure 3000 TM - Lasermed), wave length 488 nm, with a 200 mW/cm{sup 2} for 30 seconds in continuos mode; and diode laser (L 808 Medical Laser - Lasering do Brasil), wave length 808 {+-} 10 nm, with 1,6 W/cm{sup 2} for 30 seconds in continuos mode. The application mode done by a scanning movement over the buccal surface. The bleaching agents used were: Opalescence Extra (OE) - Ultradent Products USA, hydrogen peroxide 35%, gel with Carotene to convert light into heat; Pola Office (PO) - SDI - USA single doses of hydrogen peroxide; Whiteness HP (WHP) - FGM - Brasil, hydrogen peroxide 35%; Opus White (OW) - Sharplan - Israel, hydrogen peroxide 35%. The temperature rise measurement was performed with a thermocouple model 120-202-AJ, Fenwal, inserted into the pulpar chamber. The bleaching material was applied on the tooth surface with 2 mm thickness and then the irradiation was perform. The thirty two teeth were randomized in four groups, two for each laser device. The obtain data demonstrated a superior performance of the Argon laser on tooth whitening and also better results concerning the temperature rise. The alteration on tooth coloration was verified through digital spectrophotometer (Shade-Eye EX - Shofu) and quantitative analyses showed statistical differences among the groups. The bleaching results for Argon laser combined with OE and WHP were superior for the other groups. The mean variation of the temperature rise

  1. Celulas solares e sensores de filme fino de silicio depositados sobre substratos flexiveis =

    Science.gov (United States)

    Pinto, Emilio Sergio Marins Vieira

    Celulas solares flexiveis de filmes finos de silicio sao geralmente fabricadas a baixa temperatura sobre substratos de plastico ou a mais elevadas temperaturas sobre folhas de aco. Esta tese reporta o estudo da deposicao de filmes finos sobre diferentes substratos de plastico, transparentes e coloridos, para celulas solares do tipo sobrestrato e substrato, respectivamente. Como objetivo co-lateral, os filmes dopados depositados sobre plastico foram usados como sensores de deformacao, utilizando as suas propriedades piezo-resistivas. Elevadas taxas de deposicao dos filmes de silicio depositados sobre plastico foram obtidas a baixa temperatura do substrato (150ºC) por rf-PECVD. A influencia de diferentes parametros de deposicao sobre as propriedades e taxa de deposicao dos filmes resultantes foram estudados e correlacionados. Celulas solares de filmes finos de silicio amorfo e microcristalino foram desenvolvidas a baixas temperaturas sobre plasticos. Eficiencias de 5 - 6.5% foram alcancadas para as celulas amorfas e 7.5% para as celulas microcristalinas. Efeitos de aprisionamento da luz foram estudados atraves da texturizacao por ablacao laser de substratos de plastico e corrosao umida de TCO sobre plastico. Filmes finos de silicio microcristalino, depositados por HW-CVD, com fator piezoresistivo de -32.2, foram usados para fabricar sensores de deformacao em uma membrana plastica muito fina (15 μm). Estruturas de teste em textil e a miniaturizacao dos sensores piezoresistivos depositados sobre substratos flexiveis de poliimida foram abordados.

  2. O uso do laser na reabilitação das desordens temporomandibulares

    Directory of Open Access Journals (Sweden)

    Thiago de Oliveira Assis

    Full Text Available INTRODUÇÃO: Entende-se disfunção temporomandibular comoum termo coletivo que envolve um grande número de problemas clínicos que afetam os músculos mastigatórios, a articulação temporomandibular (ATM e estruturas associadas. Dentre os principais sinais e sintomas, incluem-se dores nos músculos da mastigação ou na ATM, ruídos articulares, limitação de abertura, retração gengival, oclusão inadequada, distúrbios auditivos, cefaleias, sensibilidade em toda a musculatura do sistema estomatognático e cervical. OBJETIVOS: Estudar a influência da laserterapia de baixa intensidade (diodo no tratamento das desordens temporomandibulares. MATERIAIS E MÉTODOS: Trata-se de uma revisão sistemática. Foram consultadas as seguintes bases de dados: BIREME, MEDLINE, PubMed, Science Direct e LILACS. Os termos de busca utilizados foram "temporomandibular laser therapy" e "ATM laser treatment", em inglês e português. Não foram estabelecidos limites de busca. Após a busca independente de dois revisores, foram encontrados 1.344 artigos e, após a aplicação dos critérios de exclusão, 12 artigos foram selecionados para a análise. RESULTADOS: Dos 12 artigos selecionados, apenas em 1 (um deles não foi verificada qualquer melhora do quadro doloroso na ATM em virtude dos diversos tipos de DTM. CONCLUSÃO: Apesar dos resultados satisfatórios do uso do laser na redução sintomática da dor nos DTM, ainda é controversa a utilização dos seus parâmetros para cada caso. Por isso, sugerimos a realização de outros estudos para que essas lacunas sejam preenchidas com o objetivo maior de promover uma melhor qualidade de vida para as pessoas que sofrem quaisquer transtornos na região da ATM.

  3. Evaluation of the hydrogen peroxide and special colorant effects under irradiation by argon and diode laser on tooth-whitening in vitro; Avaliacao do efeito de corantes especiais e peroxido de hidrogenio irradiados por laser de argonio e laser de diodo no clareamento dental 'in vitro'

    Energy Technology Data Exchange (ETDEWEB)

    Gaspar, Jose Antonio

    2003-07-01

    The aim of this study is to determine if there is any interaction between special colorant found on bleaching agents that have 35 % of hydrogen peroxide on its composition, and argon or diode laser. The first part of the study was to characterize the extrinsic stain obtained through a staining solution containing products present on the day by day diet of the general population. Thirty-two inferior human extracted incisors, free of caries and without filling material were selected for the study. The laser devices employed were Argon laser (AccuCure 3000 TM - Lasermed), wave length 488 nm, with a 200 mW/cm{sup 2} for 30 seconds in continuos mode; and diode laser (L 808 Medical Laser - Lasering do Brasil), wave length 808 {+-} 10 nm, with 1,6 W/cm{sup 2} for 30 seconds in continuos mode. The application mode done by a scanning movement over the buccal surface. The bleaching agents used were: Opalescence Extra (OE) - Ultradent Products USA, hydrogen peroxide 35%, gel with Carotene to convert light into heat; Pola Office (PO) - SDI - USA single doses of hydrogen peroxide; Whiteness HP (WHP) - FGM - Brasil, hydrogen peroxide 35%; Opus White (OW) - Sharplan - Israel, hydrogen peroxide 35%. The temperature rise measurement was performed with a thermocouple model 120-202-AJ, Fenwal, inserted into the pulpar chamber. The bleaching material was applied on the tooth surface with 2 mm thickness and then the irradiation was perform. The thirty two teeth were randomized in four groups, two for each laser device. The obtain data demonstrated a superior performance of the Argon laser on tooth whitening and also better results concerning the temperature rise. The alteration on tooth coloration was verified through digital spectrophotometer (Shade-Eye EX - Shofu) and quantitative analyses showed statistical differences among the groups. The bleaching results for Argon laser combined with OE and WHP were superior for the other groups. The mean variation of the temperature rise

  4. Laser 830nm na viabilidade do retalho cutâneo de ratos submetidos à nicotina Laser 830nm on the viability of skin flaps in rats submitted of nicotine

    Directory of Open Access Journals (Sweden)

    Lais Mara Siqueira das Neves

    2011-01-01

    Full Text Available OBJETIVO: Investigar os possíveis efeitos da laserterapia com laser diodo 830nm ao se contrapor a ação da nicotina na viabilidade do retalho cutâneo em ratos. MÉTODOS: Foram utilizados 16 ratos Wistar, distribuídos em 2 grupos de 8: Grupo 1- submetido à técnica cirúrgica, para obtenção dos retalhos cutâneos randômicos de base cranial, com injeção subcutânea de nicotina em uma dose de 2mg/Kg/dia, uma semana antes e uma semana após o procedimento cirúrgico e simulação da radiação laser; Grupo 2- similar ao grupo 1, cujos retalhos cutâneos randômicos de base cranial foram submetidos à irradiação do laser imediatamente após a cirurgia e nos 4 dias subsequentes. Após a eutanásia, as áreas de necrose e de tecido viável foram examinadas através do método de pesagem do Gabarito de Papel e pelo método semi-automático de análise de imagens (Mini-Mop®. RESULTADOS: Os resultados foram analisados estatisticamente através do teste ANOVA. Os valores de porcentagem de área de necrose através do método de análise mostraram uma diminuição da área de necrose no grupo 2 onde foi aplicado laser. CONCLUSÃO: O laser 830nm foi eficaz na melhora da viabilidade do retalho cutâneo em ratos submetido à ação da nicotina. Nível de evidência II: Estudos terapêuticos - Investigação dos resultados do tratamento.OBJECTIVE: To investigate the possible effects of laser diode 830nm counter to the action of nicotine on the viability of the skin flap in rats. METHODS: 24 Wistar-albino rats were used, divided into 3 groups of 8: Group 1 - subject to the surgical technique to obtain the random skin flap in cranial base, subcutaneous injection of nicotine of 2mg/Kg/dia a week before and one week after surgery and simulation of laser. Group 2 - similar to group 1, the random skin flap in the cranial base were subjected to laser irradiation immediately after surgery and on thesubsequent 4 days. After euthanasia, areas of necrosis and

  5. Thermographic and spectrophotometric analysis of the extrinsic tooth bleaching using a diode laser and a LED system. In vitro; Analise termografica e espectrofotometrica do clareamento dental extrinsico utilizando laser de diodo e sistema de LED. Estudio In vitro

    Energy Technology Data Exchange (ETDEWEB)

    Micheli, Paola Racy de

    2004-07-01

    The aim of this study was to evaluate the intra-pulpal temperature change, as well as to compare the bleaching power of a 38% hydrogen peroxide (Opalescence Xtra Boost- Ultradent. Inc), when activated with a diode laser, with a LED system and without activation, in the extrinsic tooth bleaching in vitro. Ten mandibular human incisors, a thermocouple, 45 bovine incisors and a spectrophotometer (Shade Eye- Shofu) for the color analysis. The samples were divided into 3 groups: 38% hydrogen peroxide activated by a diode laser (ZAP lasers, wavelength 808 nm {+-} 5, power of 1,4 W); 38% hydrogen peroxide activated by LED (Bright LEC-Mmoptics, wavelength 470 nm {+-} 25, power of 380 mW); 38% hydrogen peroxide without activation. After the artificial pigmentation, the bleaching agent acted for the same time in the 3 groups, differing only by the type of activation. The results of temperature showed that the LED activation was safer than the diode laser, which, in some measures exceeded the limit of 5.6 deg C. The luminosity of the samples did not show significantly statistics differences in none of the groups and moments of this study. The diode laser and LED activation did not influenced at the bleaching power of the peroxide, which showed effective for removing stains, with great capacity of bleaching bovine tooth artificially darkened. (author)

  6. Directory of Open Access Journals (Sweden)

    Daniela Conceição Gomes Gonçalves e Silva

    2013-02-01

    Full Text Available BACKGROUND: Laser therapy is a low cost, non-invasive procedure with good healing results. Doubts exist as to whether laser therapy action on microorganisms can justify research aimed at investigating its possible effects on bacteria-infected wounds. OBJECTIVE: To assess the effect of low intensity laser on the rate of bacterial contamination in infected wounds in the skin of rats. METHODS: An experimental study using 56 male Wistar rats. The animals were randomly divided into eight groups of seven each. Those in the "infected" groups were infected by Staphylococcus aureus MRSA in the dorsal region. Red laser diode (AlGaInP 658nm, 5J/cm2 was used to treat the animals in the "treated" groups in scan for 3 consecutive days. Samples were drawn before inoculating bacteria and following laser treatment. For statistical analysis we used the nonparametric Wilcoxon (paired data method with a significance level of p RESULTS: The statistical analysis of median values showed that the groups submitted to laser treatment had low bacterial proliferation. CONCLUSION: The laser (AlGaInP, with a dose of 5J/cm2 in both intact skin and in wounds of rats infected with Staphylococcus aureus MRSA, is shown to reduce bacterial proliferation.FUNDAMENTOS: Fundamentos: A terapia a laser é um procedimento de baixo custo, não invasiva e com bom desempenho na cicatrização. As dúvidas existentes quanto a sua ação sobre microrganismos justifica a realização de pesquisas visando investigar os possíveis efeitos em feridas infectadas por bactérias. OBJETIVO: Avaliar o efeito do laser de baixa intensidade sobre a taxa de contaminação bacteriana em feridas infectadas na pele de ratos.MÉTODOS:Estudo experimental, utilizando 56 ratos machos Wistar. Os animais foram distribuídos aleatoriamente em oito grupos de sete animais. Nos animais dos grupos lesionados foi realizada uma incisão na região dorsal.Os animais dos grupos infectados foram infectados por

  7. Modeling of thermal and optical effects in dental pulp during the irradiation with neodymium and diode lasers; Modelagem dos efeitos termicos e opticos na polpa dentaria durante a irradiacao com os lasers de diodo de neodimio

    Energy Technology Data Exchange (ETDEWEB)

    Farhat, Patricia Bahls de Almeida

    2003-07-01

    During the development of applications of high intensity lasers in the enamel and dentine, adverse thermal effects into the entire dental structure, including the pulp, must be verified. The measurement of the temperature in the intact pulp, however, is not a solved problem. For this purpose, models have been used frequently, using extracted teeth, with pulpal cavities filled with materials that simulate only thermal properties of the pulp. Current models, however, do not simulate optical properties of the pulp, not taking the remaining radiation in the pulp chamber into account. The aim of this study was to verify if the remaining radiation from neodymium and diode lasers that reach the pulp chamber, at the models using extracted bovine teeth, can cause local thermal effects. For this purpose, two models were developed, using extracted bovine teeth with their pulp chambers filled with water (simulating pulp thermal characteristics) without (model 1) and with (model 2) an optical absorbent. Models were radiated with 1 W. The obtained results show that, for both lasers, the temperature rise in model 2 pulp chamber is: up to 11 % higher than in the model 1 when the enamel is radiated; and up to 37% higher than in the model 1 when dentine is radiated (1 mm from the pulp), indicating that the level of the remaining radiation is relevant for the construction of models excited by the neodymium and diode lasers. (author)

  8. Coatings of metal substrates assisted by laser radiation

    Directory of Open Access Journals (Sweden)

    Caudevilla, H.

    1998-04-01

    Full Text Available In this contribution, a new way of obtaining ceramic coatings is presented. This method uses precursor suspensions, settled on substrates and in-situ pyrolised with a laser. Different deposition techniques of the ceramic precursors have been tested in order to obtain a homogeneous distribution on the metal substrate before the laser treatment.

    La combinación de recubrimientos utilizando disoluciones de precursores metálicos con la pirólisis asistida por láser, permite obtener una gran diversidad de recubrimientos sobre sustratos de muy distinta naturaleza. Se han realizado estudios, tanto con disoluciones poliméricas, como con disoluciones de tipo sol-gel y pastas obtenidas con técnicas similares, depositadas utilizando métodos convencionales de inmersión y atomización previa a la pirólisis asistida por láser, así como simultánea. En este trabajo se presenta un resumen de los resultados más significativos obtenidos en la realización de recubrimientos sobre sustratos metálicos y cerámicos.

  9. The resolving limit of a three-diode coincidence circuit; Limite de resolution d'un circuit de coincidence a trois diodes; Predel razreshayushchej sposobnosti trekhdiodnoj skhemy sovpadeniya; Poder de resolucion de un circuito de coincidencia de tres diodos

    Energy Technology Data Exchange (ETDEWEB)

    De Vries, H [University of Marburg, Marburg, Federal Republic of Germany (Germany)

    1962-04-15

    mesures effectuees. Il a deduit notamment la courbe de resolution du systeme a coincidences et calcule le temps de resolution. Il a determine comment l'ensemble diodes, le bruit de l'amplificateur et le dispositif d'adaptation de l'amplificateur a l'ensemble diodes conditionnent le temps de resolution du systeme a coincidences. L'analyse des mesures et les resultats de calculs theoriques montrent que 10{sup -11} s est le temps de resolution le plus court qui puisse etre obtenu avec un systeme a coincidences a trois diodes dans les conditions optima. L'auteur donne la derivee de la courbe de resolution et indique les mesures. Il montre que les experiences confirment les calculs theoriques. (author) [Spanish] Para investigar el limite de resolucion del circuito de coincidencia con tres diodos de De Benedetti y Richings, se ha ensayado un dispositivo completo de coincidencias consistente en la etapa de diodos, amplificador, discriminador de amplitudes y univibrador, utilizando impulsos de 10{sup -9} s de tiempo de elevacion y 2 x 10{sup -9}s de anchura en la base. Se han medido las amplitudes y las integrales de los impulsos recibidos a la salida del amplificador, asi como la curva de la resolucion en funcion de diversos parametros de interes (amplitud de los impulsos de entrada, resistencia de entrada del amplificador, condiciones de funcionamiento de los diodos, etc.). Se han hecho ciertas consideraciones para explicar los resultados obtenidos. Se ha deducido la curva de resolucion del dispositivo de coincidencia y se ha calculado el tiempo de resolucion. Se ha deducido como la etapa de diodos, el ruido del amplificador y el acoplo entre aquella y este determinan el tiempo de resolucion del circuito de coincidencia. Las deducciones teoricas y el analisis de las mediciones dan para el tiempo de resolucion del circuito un valor minimo de 10{sup -11} s en las condiciones optimas. Se indican los resultados de las mediciones y la manera como se deduce la curva de resolucion. Se

  10. Efficacy and safety of green laser photocoagulation for threshold retinopathy of prematurity Eficácia e segurança da fotocoagulação com laser verde na retinopatia da prematuridade limiar

    Directory of Open Access Journals (Sweden)

    Rodrigo Pessoa Cavalcanti Lira

    2008-02-01

    Universidade Federal de Pernambuco, entre janeiro 2004 e janeiro 2006. Tratamento foi realizado com anestesia tópica, sob monitorização de neonatologistas. Foi utilizado laser verde de estado sólido com diodo de freqüência dobrada de 532 nm. Presença de túnica vasculosa lentis ou catarata foi excluída antes do tratamento. Foram obtidos os seguintes dados pré-operatórios: idade, peso ao nascer e estágio da ROP. Dados pós-operatórios incluíram complicações associadas com o tratamento, estágio da ROP e avaliação da necessidade de cirurgia por falha do tratamento com fotocoagulação. RESULTADOS: Vinte e dois neonatos foram submetidos à fotocoagulação com laser verde para ROP limiar. Um total de 31 olhos foi incluído no estudo. A idade gestacional média foi de 30 ± 3 semanas e a média do peso ao nascer foi de 1120 ± 490 g. Regressão da doença após terapia com laser foi observada em 30 olhos (96,7%. Apesar do tratamento um olho evoluiu para estágio 4A. Apenas 7 olhos precisaram de mais uma sessão de laser. Não houve efeitos adversos na câmara anterior como queimaduras ou sangramentos. Também não foram observados efeitos colaterais no segmento posterior. Formação de catarata não foi observada até o final do acompanhamento. CONCLUSÕES: A fotocoagulação com laser verde é uma alternativa efetiva e segura à fotocoagulação com laser vermelho e à crioterapia para o tratamento da ROP limiar.

  11. Effects of the infrared diode low intensity laser therapy for oral mucositis: a clinical trial; Estudo clinico dos efeitos do laser diodo de baixa intensidade de emissao infravermelha para casos de mucosite bucal

    Energy Technology Data Exchange (ETDEWEB)

    Freire, Maria do Rosario Santos

    2004-07-01

    Chemotherapy associated or not with radiotherapy and surgery may be used for treating patients presenting some pathogenies such as cancer. Many side effects are visibly in the mouth in several forms as a consequence of this treatment and oral mucositis is the most common, with great prevalence, causing degrees of morbidity and even death. This research is about improving the quality of life for these patients by using of laser radiation through a GaAlAs active medium, in a continuous manner, with a low power ( 60 mW), the diode laser acting at 780 nm wavelength infrared, with a energy density 7,5 J/cm{sup 2} and 6,0 J/cm{sup 2}, for the therapeutic and preventive groups respectively, and a third control group without radiation. Two protocols were studied in patients during 5-fluorouracil chemotherapic regime and combinations, because nowadays polychemotherapy is used, an associations of drugs, for a neoadjuvant treatment, adjuvant, potentionalize or palliative means, for the chemotherapy treatment. In a context of 60 patients, 16 patients had received the laser irradiations doses, 10 days for the therapeutic protocols and 11 days for the preventive irradiations. The therapeutic group presented a 50% of the total healing process and significant decrease in symptoms of pain (VAS=0 with p =0,01). For the preventive irradiations (D-5, D, D+5), that means the day of the QT, 5 days before the chemotherapy regime starts until 5 days later, only 1 patient had some kind of ulceration during more than four months of control. Results of the present study showed to be effective and promising for both employed protocols, therapeutic and preventive. Further studies must be developed in order to improve the present results. (author)

  12. Application of the diode laser for welding in tairoled blanks; Aplicaciond el lase de diodo para la soldadura en tailored blanks

    Energy Technology Data Exchange (ETDEWEB)

    Bocos, J. L.; Zubiri, F.; Garciandia, F.; Pena, J.; Cortiella, A.; Berrueta, J. M.; Zapirain, F.

    2004-07-01

    During the last years, one of the most interesting subjects in the automotive industry is the weight reduction of the automobile, and so to diminish the fuel consumption. Among other performance, the use in the body car of materials which have high mechanical resistance must be considered for the weight reduction of the automobile and maintaining high benefits. In this work, it has been studied the utilization of the diode laser for high resistance steel sheets welding, concretely microalloying steels (ZStE), DP dual phase and TRIP transformation induced plasticity. These steels can be employed in tailored blanks, which are defined as two or more separate pieces of flat material of dissimilar thickness and/or physical properties joined together before forming, to provide superior qualities in the finished stamped part. In this study, the metallographic characterization has been realised in the welding seams, and the mechanical behaviour has been analysed employing the following tests: microhardenss, drawing, tensile and fatigue. (Author) 15 refs.

  13. Efeito da terapia com laser de arsenieto de gálio e alumínio (660Nm sobre a recuperação do nervo ciático de ratos após lesão por neurotmese seguida de anastomose epineural: análise funcional Effect of gallium-aluminum-arsenide laser therapy (660Nm on recovery of the sciatic nerve in rats following neurotmesis lesion and epineural anastomosis: functional analysis

    Directory of Open Access Journals (Sweden)

    FA Reis

    2008-06-01

    Full Text Available CONTEXTUALIZAÇÃO: As lesões nervosas periféricas podem comprometer atividades diárias de um indivíduo e resultam em perda da sensibilidade e motricidade do território inervado. OBJETIVO: Com o intuito de acelerar os processos regenerativos, objetivou-se analisar a influência da aplicação do laser de arsenieto de gálio e alumínio (AsGaAl, 660Nm sobre a recuperação funcional do nervo ciático de ratos. MATERIAIS E MÉTODOS: O nervo ciático de 12 ratos Wistar foi submetido à lesão por neurotmese e anastomose epineural e divididos em dois grupos: controle e laserterapia. Após a lesão, utilizou-se o laser de GaAlAs, 660Nm, 4J/cm², 26,3mW, feixe de 0,63cm², em três pontos eqüidistantes sobre a lesão, por 20 dias. As impressões das pegadas dos animais foram obtidas antes e após (sete, 14 e 21 dias pós-operatórios o procedimento cirúrgico e calculou-se o índice funcional do ciático (IFC. RESULTADOS: A comparação do IFC não resultou em diferença significante (p>0,05 entre os grupos. CONCLUSÕES: Conclui-se que os parâmetros e métodos empregados na laserterapia demonstram resultados nulos sobre o IFC no período avaliado.CONTEXT: Peripheral nerve injuries result in sensory and motor losses in the innervated area and can hinder individuals’ daily activities. Objective: The objective was to analyze the influence of applying gallium-aluminum-arsenide (GaAlAs laser (660Nm on the functional recovery of the sciatic nerve in rats. METHODS: The sciatic nerve of 12 Wistar rats was subjected to injury consisting of neurotmesis and epineural anastomosis. The rats were divided into two groups: control and laser therapy. After the injury, a GaAlAs laser was used (660Nm, 4J/cm², 26.3mW and 0.63cm² beam at three equidistant points on the injury, for 20 days. Footprint impressions were obtained from the animals before and seven, 14 and 21 days after the surgical procedure and the sciatic functional index (SFI was calculated

  14. Influencia del tiempo de explotación del Láser de CO2 y la cantidad de ventiladores del Sistema de Enfriamiento sobre la estabilidad del flujo radiante a la salida del Sistema Láser SYNRAD 48-2. // The Influences of the time of exploitation of the Laser o

    Directory of Open Access Journals (Sweden)

    V. Ramirez Chi

    2002-09-01

    Full Text Available En el diseño de un Sistema Láser para ser utilizado con fines médicos, un aspecto a tener en cuenta por su importancia es lagarantía de lograr un Sistema de Ventilación que implique mantener estable el flujo radiante de láser a la salida del equipodurante el período de explotación. En el Centro Nacional de Investigaciones Científicas (CENIC se han hechoinvestigaciones en estos equipos de Sistemas Láser con el objetivo de determinar en que medida influyen la cantidad deventiladores dispuestos sobre el flujo radiante del láser a la salida del equipo de Láser de CO2 y el tiempo de explotacióndel equipo sobre la estabilidad del flujo radiante del láser de salida. Mediante la modelación, la simulación, el Diseño deExperimento y métodos estadísticos se determinó que el tiempo de explotación del equipo durante cada intervenciónmédica y la cantidad de ventiladores implican una influencia significativa sobre la estabilidad del flujo radiante de salida.Esta investigación se llevó a cabo en el equipo de Láser de CO2 SYNRAD 48-2 y se empleó en la misma el programa decomputación para el Diseño de Experimentos Statgrafics-Plus.Palabras claves: Láser, flujo radiante.____________________________________________________________________AbstractIn the design of a Laser System/s to be used with ends doctors, an aspect to keep in mind for its importance is the guaranteeof achieving a System of Ventilation that implies to maintain stable the radiant flow of exit of the Laser during the periodof exploitation. In the CENIC investigations have been made in these Laser System/s with the objective of determining inthat measured they influence the quantity of willing fans about the radiant flow of exit of the Laser of CO2 and the time ofexploitation of the Laser about the stability of the radiant flow of exit. By means of the modelación, the simulation, theDesign of Experiment and statistical methods were determined that the time of

  15. Termoterapia transpupilar como opção terapêutica para hemangioma circunscrito de coróide: relato de caso

    Directory of Open Access Journals (Sweden)

    Roizenblatt Jaime

    2002-01-01

    Full Text Available Os autores descrevem um caso de hemangioma circunscrito de coróide, com descolamento de retina associado, tratado por meio de termoterapia transpupilar com laser de diodo. Os parâmetros utilizados foram: 900 mW, mira de 4,2 mm, tempo de 3 minutos, lente QuadrAspheric (Volkâ com fator de magnificação de 1,97. Um mês após o tratamento ocorreu redução significativa do hemangioma, com recuperação integral da visão deste olho. São feitas considerações a respeito do método, o qual mostra-se promissor no tratamento destes tumores vasculares.

  16. Diseño de un sistema de iluminación con tecnología LED

    OpenAIRE

    Costa Muñoz, David

    2010-01-01

    El proyecto tiene como objetivo el diseño de un punto de luz para alumbrado comercial, que utilizará la tecnología del LED (diodo emisor de luz) para su funcionamiento. El desarrollo experimentado por la tecnología LED la convierte en fuente de luz ideal para la iluminación de espacios comerciales por sus prestaciones: duración, rapidez de respuesta, bajo impacto ambiental, etc. Diversos estudios han demostrado que la instalación y uso de Diodos Emisores de Luz (LED), además...

  17. Apuntes sobre esporotricosis

    OpenAIRE

    Londoño, Fabio

    2011-01-01

    Se hace una breve reseña histórica de las primeras comunicaciones sobre esporotricosis. Se destaca la amplia difusión de la enfermedad en nuestro país. 3. Se hace notar la no existencia de datos bibliográficos sobre formas extracutáneas. 4. Se llama la atención sobre la eficaz ayuda de la intradermo-reacción con esporotriquina en el diagnóstico de la enfermedad. 5- Se comunica un caso de esporotricosis verrugosa tratado con anfotericin B, con excelentes resultados

  18. Apuntes sobre esporotricosis

    Directory of Open Access Journals (Sweden)

    Fabio Londoño

    1960-01-01

    Full Text Available Se hace una breve reseña histórica de las primeras comunicaciones sobre esporotricosis. Se destaca la amplia difusión de la enfermedad en nuestro país. 3. Se hace notar la no existencia de datos bibliográficos sobre formas extracutáneas. 4. Se llama la atención sobre la eficaz ayuda de la intradermo-reacción con esporotriquina en el diagnóstico de la enfermedad. 5- Se comunica un caso de esporotricosis verrugosa tratado con anfotericin B, con excelentes resultados

  19. Influência de diferentes comprimentos de onda da laserterapia de baixa intensidade na regeneração tendínea do rato após tenotomia Influence of different low-intensity laser therapy wavelengths for rat tendon regeneration following tenotomy

    Directory of Open Access Journals (Sweden)

    ERB Arruda

    2007-08-01

    Full Text Available OBJETIVO: Comparar a influência da terapia laser baixa intensidade (TLBI na organização das fibras de colágeno, na dose de 3J/cm² em dois comprimentos de onda (lambda (670nm e 904nm e na associação de ambos, durante o reparo do tendão calcâneo de ratos. MÉTODO Foram utilizadas 37 ratas da raça Wistar divididas em 5 grupos, submetidas a tenotomia total por meio de cisalhamento transversal do tendão na porção média entre a inserção calcânea e a junção miotendínea, com exceção do grupo GP (n= 6 que não houve lesão. O grupo GA (n= 8 foi submetido à irradiação laser lambda= 904nm, diodo de GaAs, emissão pulsada, duração do pulso de 180ns, freqüência de pulso de 2000Hz e potência de pico de 15W e dose de 3J/cm². O grupo GB (n= 8 foi submetido à irradiação laser lambda= 670nm, diodo de AlGaInP, emissão contínua, potência 30mW e dose de 3J/cm². O grupo GAB (n= 8 recebeu irradiação de ambos os lasers 670nm e 904nm associados. O grupo GCL (n= 7 foi submetido a um tratamento placebo, assim como um grupo padrão. Após um total de 12 sessões de laserterapia, os animais foram submetidos à eutanásia no 14º dia pós-operatório. Após processamento histológico padrão, foi realizada a quantificação do retardo óptico pela birrefringência. RESULTADOS: A análise estatística mostra que todos os grupos irradiados apresentaram valores de retardo óptico maiores quando comparados ao grupo placebo (p= 0,00001, o que indica que apresentaram melhor organização das fibras colágenas ao longo do eixo longitudinal do tendão, evidenciando melhor qualidade no reparo. O grupo GAB foi o que apresentou melhores resultados (p= 0,00001 quando comparado aos demais grupos, excetuando-se o GP, que é o referencial de retardo óptico para esta faixa etária.OBJECTIVE: The aim of this study was to compare the effect of the low level laser therapy in the organization of the collagen fibers with 3 J/cm² of dose in two

  20. Efecto de la intensidad de diodos electroluminosos y fotoperiodo en la optimización de la producción de biomasa de Spirulina ( Arthrospira

    Directory of Open Access Journals (Sweden)

    V. Vásquez - Villalobos

    2017-01-01

    Full Text Available Se optimizó la producción de biomasa ( ф de cultivos batch d e Spirulina sp. en fotobiorreactores a escala de laboratorio (FBL de 0,2 L, por efecto de X 1 : intensidad de diodos electroluminosos (LED’s entre 1,25 a 41,7 klux y X 2 : fotoperiodo de12/12 a 24/0, h de luz/h de oscuridad (L/O utilizando un diseño compuesto central rotacional (DCCR y metodología de superficie de respuesta (MSR. Asimismo, se eval uaron las características hidráulicas y el valor ф de un cultivo batch de Spirulina en un fotobiorreactor de canal bucle cerrado abierto a la atmósfera (FB - BCAA por efecto de la iluminación LED de 8,3±1,9 klux y fotoperiodos de 12/12 y 24/0 h L/O. En los FBL se encontró dos zonas óptimas de ф , ambas con una intensidad LED de 21,5 klux y fotoperiodos 12/12 y 24/0 h L/O, siendo los valores ф de 1,65 y 1,62 respectivamente. El modelo matemático que indicó estas zonas fue de segundo orden (p = 0,000396 < 0,05 con una consistencia de predicción de R² = 0,92. En el FB - BCAA, el cultivo de Spirulina sp. con fotoperiodo de 12/12 h L/O, mostr ó un valor ф de 0,72, una adaptación más rápida de λ = 4,62 h, una mayor velocidad específica de crecimiento de μ max = 0,033 h - 1 y menor tiempo de consumo de energía de 74,05 h ; comparado con el cultivo desarrollado con fotoperiodo 24/0 h L/O. Los parámetros hidráulicos del FB - BCAA fueron: volumen de operación 2,5 L, velocidad de flujo 0,26 m/s, números de Reynolds ( Re 15488, Froude ( Fr 0,60 y Vedernikov ( V ed 0,90.

  1. Effects of 960 nm diode laser irradiation on dental enamel in vitro: temperature and morphological analysis and evaluation of enamel demineralization; Estudo in vitro dos efeitos promovidos pelo laser de diodo em 960 nm no esmalte dental humano: analise de temperatura, analise morfologica e avaliacao da resistencia a desmineralizacao

    Energy Technology Data Exchange (ETDEWEB)

    Kato, Ilka Tiemy

    2004-07-01

    The aim of this study is to determine the effects of diode laser irradiation on enamel demineralization. To achieve this goal appropriate photon absorbing substances for the laser radiation, safe laser parameters and adequate temperature measuring apparatus had to be determined. Next, the effects of diode laser and acidulated phosphate fluoride on enamel demineralization by calcium content analysis were evaluated with inductively coupled plasma atomic emission spectrometry (ICP-AES). In the first part of the study, five dyes consisting of vegetable coal diluted in five different liquids were analyzed and vegetable coal diluted in physiological solution was chosen for use as absorber. Methodologies to measure pulp chamber temperature were evaluated and modeling clay was chosen as fixture for the enamel samples held at body temperature. In the second part of the study, different energy density parameters (1.8 J/cm{sup 2}, 3.7 J/cm{sup 2}, 5.6 J/cm{sup 2}, 7.4 J/cm{sup 2} and 9.3 J/cm{sup 2}) exposure times (10, 15, 20, 25 e 30 seconds) and time intervals between dye application and laser irradiation (5, 30, 60, 90 e 120 seconds) were evaluated with respect to temperature changes in the pulp chamber. The enamel morphology was analyzed by scanning electron microscopy. Acid resistance was measured using seventy five enamel specimens, divided in five groups (control, fluoride, laser, laser + fluoride and fluoride + laser). The amount of calcium lost during demineralization in lactic acid was measured by ICP-AES. The results obtained in this experiment permit the conclusion that diode laser irradiation did not increase acid resistance. When associated with fluoride, the acid resistance did not differ from the results obtained with fluoride alone. (author)

  2. MARCADO CON LÁSER SOBRE CERÁMICA VIDRIADA POR APORTE SUPERFICIAL DE UN PIGMENTO DE COBALTO

    Directory of Open Access Journals (Sweden)

    Maryory Astrid Gómez

    2008-07-01

    Full Text Available El procesamiento de materiales por láser tiene gran aplicación a escala industrial, para imprimir patrones gráficos sobre superficies cerámicas. La rápida implementación de este proceso se debe a que, respecto al proceso convencional de horneado, tiene ventajas tales como: se concentra el calor sólo en la zona irradiada, lo que conlleva un menor consumo de energía sin afectar significativamente el resto de la pieza; se obtienen patrones gráficos de alta resolución espacial; permite introducir cambios durante el proceso sin requerir largas paradas, y la generación de residuos es mínima o casi nula. En este estudio se presentan los resultados obtenidos en el vidriado con láser Nd:YAG (λ&=1064 nm sobre las superficies esmaltadas de azulejos, las cuales fueron previamente recubiertas con pigmento negro de cobalto. Con el láser operando en modo continuo (CW, se marcaron una serie de líneas, cuyo ancho y profundidad evidenciaron una dependencia directa con la variación de la potencia y velocidad de desplazamiento del haz láser sobre la superficie del azulejo. Estas líneas vidriadas fueron finalmente caracterizadas por microscopía óptica, espectroscopia de dispersión de energía (EDS y difracción de rayos X.Laser materials processing has great application to industrial scale, to print graphic patterns on ceramics surfaces. The fast implementation of this process is due to the fact that, with respect to the conventional baking process, has advantages, such as: heat is concentrated only in the radiated zone that involves a smaller energy consumption without affecting significantly the rest of the piece, graphic patterns with of highly spatial resolution are obtained, it permits to introduce changes during the process without requiring long stops, and low or almost none generation of residues. In this study the results obtained from Nd:YAG (λ=1064 nm laser glazing on the enameled surfaces of glazed tiles, which were previously

  3. Review about laser nitriding of titanium alloys; Revision sobre nitruraciones laser de aleaciones de titanio

    Energy Technology Data Exchange (ETDEWEB)

    Perez-Artieda, M.G.; Fernandez-Carrasquilla, J.

    2010-07-01

    A common technique used to improve the wear response of titanium alloys is to nitride the surface, using chemical or physical vapour deposition, ion implantation or surface remelting in a nitrogen atmosphere. In this revision nitriding systems with laser technology are studied, used in titanium alloys surface treatments.For high temperature, high strength applications, titanium based alloys are an attractive light-weight alternative to steel, due to their high strength to weight ratio and corrosion resistance. In applications that require good wear resistance, titanium alloys pose a problem due to their poor tribological characteristics.Titanium alloys used with a suitable nitriding treatment could allow the replacement of steel in different applications, obtaining weight savings in fabricated components. (Author). 68 refs.

  4. Photodynamic inactivation of in vitro bacterial cultures from pressure ulcers Inativação fotodinâmica de culturas de bactérias in vitro provenientes de úlceras de pressão

    Directory of Open Access Journals (Sweden)

    Paulo de Tarso Camillo de Carvalho

    2006-01-01

    Full Text Available PURPOSE: To evaluate in vitro the antibacterial effect of diode laser light of wavelength 650 nm, in association with the photosensitive substance toluidine blue, on the bacteria in infected skin ulcers. METHODS: Samples were collected by means of swabs containing a medium for transporting infected material from skin ulcers. The material was inoculated into culturing medium containing azide blood agar for the growth of Gram-positive bacteria, and MacConkey agar for Gram-negative bacteria, and incubated for 48 hours. The results obtained from counting the colony-forming units were correlated and subjected to statistical analysis, adopting the significance level of p > or = 0.05. RESULTS: From analysis of variance (ANOVA, the result for the general mean was p = 0.0215. Using the t test with post-hoc test, the result for TBO vs. Control was p = 0.0186, and for TBO + Laser vs. Control it was p = 0.0039. CONCLUSION: There was a significant reduction in colony-forming units when the cultures were subjected to photodynamic therapy.OBJETIVO: Avaliar in vitro o efeito antibacteriano do laser diodo com comprimento de onda de 650nn, associado a substancia fotossensível azul de toluidina sobre as bactérias de ulceras cutâneas infectadas. MÉTODOS: Foram coletadas amostras através de um swab com meio de transporte, de material infectado de úlceras cutâneas. Os materiais foram inoculadas em meios de cultura contendo ágar sangue azida para o crescimento de bactérias gram-positivas e agar Mac Conkey para as gram-negativas, e incubadas por 48 horas. Os resultados obtidos da contagem das unidades formadoras de colônias foram relacionados e submetidos a analise estatística adotando como nível de significância p > ou = 0.05. RESULTADOS: Os resultados da análise de variância ANOVA para a media geral foi p= 0,0215 e para o post hoc test teste t. TBO x Controle p=0,0186, TBO + Laser x Controle p=0,0039. CONCLUSÃO: Houve redução, significativa das

  5. Clinical evaluation of dentin hypersensitivity treatment with the low intensity Gallium-Aluminum-Arsenide laser - AsGaAl Avaliação clínica do tratamento da hiperestesia dentinária com laser de baixa potência de Arseniato de Gálio-Alumínio - AsGaAl

    Directory of Open Access Journals (Sweden)

    Luciana Chucre Gentile

    2004-12-01

    Full Text Available The dentin hypersensitivity is a painful condition rather prevalent in the general population. There are several ways of treatment for such condition, including the low intensity lasers. The proposal of this study was to verify the effectiveness of the Gallium-Aluminum-Arsenide diode laser in the treatment of this painful condition, using a placebo as control. MATERIALS AND METHODS: Thirty-two patients were selected, 22 females and 10 males, with ages ranging from 20 to 52 years old. The 32 patients were randomly distributed into two groups, treated and control; the sample consisted of 68 teeth, 35 in the treated group and 33 in the control group. The treated group was exposed to six laser applications with intervals from 48 to 72 hours, and the control group received, as placebo, applications of a curing light. RESULTS: A significant reduction was observed in the pain condition between the initial phase and after six laser applications; however, such reduction could also be observed for the control group exposed to the placebo. CONCLUSION: Therapy with the low intensity Gallium-Aluminum-Arsenide laser - AsGaAl induces a statistically significant reduction in the painful condition after each application and between the beginning and end of treatment, although there was no statistically significant difference between the treated group (laser and the control group (placebo at the end of treatment and after the mediate evaluation results (after 6 weeks, this way impairing the real measurement of laser effectiveness and placebo effect.A hiperestesia dentinária trata-se de uma condição dolorosa bastante prevalente nas populações mundiais. Várias são as modalidades de tratamento para tal condição, entre elas, os lasers de baixa potência. A proposta deste estudo foi a de verificar a efetividade do laser de diodo de Arseniato de Gálio-Alumínio no tratamento desta condição dolorosa, utilizando-se um placebo como controle. MATERIAIS E M

  6. Estimación de los Parámetros de un Modelo de una Celda Fotovoltaica Utilizando un Algoritmo de Optimización de Búsqueda de Patrones

    Directory of Open Access Journals (Sweden)

    Andrés Felipe Tobón-Mejía

    2015-07-01

    Full Text Available En este artículo se propone un nuevo método para la estimación de los parámetros del modelo matemático de una celda fotovoltaica de un solo diodo. El trabajo está basado en el algoritmo de optimización llamado Pattern Search Method (MPS, por sus siglas en inglés. Los parámetros estimados son: corriente de diodo, corriente de saturación, resistencia en serie, resistencia en paralelo y el factor del diodo ideal. Los resultados muestran que es posible obtener el modelo equivalente a través de la identificación de los parámetros. Adicionalmente, los resultados obtenidos son comparados con datos obtenidos mediante un emulador de celdas fotovoltaicas. Para realizar los experimentos se asumió condiciones controladas, es decir, temperatura e irradiación constantes. De esta manera, se puede deducir que el método propuesto se puede utilizar en aplicaciones de control para el seguimiento del máximo punto de potencia (MPPT, por sus siglas en inglés de celdas fotovoltaicas.

  7. Digital signage sobre IP

    OpenAIRE

    Casademont Filella, Albert

    2012-01-01

    Projecte que versa sobre el disseny i la implementació d'un sistema de Digital Signage (Cartelleria Digital) sobre IP, creant un gestor que permeti controlar de forma remota tot un conjunt de petits dispositius connectats a pantalles que emeten continguts multimèdia com vídeos, imatges, feeds rss...

  8. Usos del rayo Laser en Odontologia restauradora: Primera parte. Aspectos generales, clasificacion, interrelacion con los tejidos vivos y precauciones en el uso

    OpenAIRE

    Natera G, Alfredo E.

    2000-01-01

    Con este artículo se pretende dar comienzo a una serie de publicaciones para así plasmar todo lo relacionado con el uso de la tecnología Laser en la Odontología Restauradora. En este primer artículo leerá sobre los antecedentes y fundamentos físicos del Rayo Laser, la clasificación y tipos de Laser disponibles para ésta área de la Odontología, su interrelación con los tejidos vivos, así como las precauciones a tomar durante su uso. En las siguientes publicaciones se esta serie leeremos las pa...

  9. In vitro study of 960 nm high power diode laser applications in dental enamel, aided by the presence of a photoinitiator dye: scanning electron microscopy analysis; Estudo in vitro das aplicacoes do laser de diodo de alta potencia 960 nm em esmalte dentario, assistido por um fotoiniciador: analise de microscopia eletronica de varredura

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Marcelo Vinicius de

    2002-06-15

    The objective of this study is to verify if a high power diode laser can effectively modify the morphology of an enamel surface, and if this can be done in a controlled fashion by changing the lasers parameters. Previous studies using SEM demonstrated that through irradiation with Nd:YAG laser (1064 nm) it is possible to modify the morphology of the dental surface in such way as to increase its resistance against caries decays. The desired procedures that should achieve a decrease of the index of caries decays and of its sequels are on a primary level, which means that action is necessary before the disease installs itself. In this study it was used for the first time a prototype of a high power diode laser operating at 960 nm, produced by the Laboratory of Development of Lasers of the Center for Lasers and Applications of the IPEN. This equipment can present several advantages as reliability, reduced size and low cost. The aim was establish parameters of laser irradiation that produce the desired effects wanted in the enamel and protocols that guarantee its safety during application in dental hard tissues, protecting it of heating effects such as fissures and carbonization. (author)

  10. A study of low power laser on the regenerative process of Girardia tigrina (Girard,1850 (Turbellaria; Tricladida; Dugesiidae Um estudo de laser de baixa potência no processo regenerativo de Girardia tigrina (Girard,1850 (Turbellaria; Tricladida; Dugesiidae

    Directory of Open Access Journals (Sweden)

    KAR. Lopes

    2009-05-01

    dose e intensidade de luz. O objetivo deste trabalho foi verificar o efeito do laser de baixa potência (660 nm no processo regenerativo de Girardia tigrina. Estes vermes têm uma elevada capacidade de regeneração. Os espécimes foram mantidos em laboratório sob uma temperatura de 19° a 24 °C por 21 dias. As planárias foram anestesiadas com gelo e amputadas com bisturi. Os 3 tratamentos foram compostos de: animais individualmente irradiados com 14 sessões de 1 minuto de duração (tratamento 1, com 14 sessões de três minutos de duração (tratamento 2 e não irradiados (controle. Elas foram irradiadas com laser diodo (660 nm 3,3 ± 0,3 mW potência, usando 0.94 mW.mm-2 de densidade de potência para cada irradiação. Durante o experimento foram realizadas 14 sessões. Os espécimes foram fixados em Bouin e corados com hematoxilina e eosina. Com base nas observações e análise histológica, foi possível avaliar os efeitos da interação entre laser e tecido. O fragmento cabeça após 1 minuto de irradiação mostrou um tecido melhor organizado quando comparado com outros tratamentos. Os aspectos dos fragmentos corpo após 3 minutos de irradiação foram muito similares para os fragmentos que não sofreram injúria. Existem mudanças na qualidade de regeneração quando tratadas com laser nas condições acima mencionadas.

  11. Evaluación de las transformaciones estructurales en recubrimientos de WC10Ni depositados por laser cladding sobre acero para herramienta EN 12379

    Directory of Open Access Journals (Sweden)

    Candel, J. J.

    2011-08-01

    Full Text Available Carbide metal matrix composite materials are known for a high resistance to all types of wear. It is due to a beneficial combination of properties given by hard phase particles included in a tough matrix. Different kinds of those materials have been employed in the development of new high properties cutting tools. Laser cladding (LC technique allows obtaining an accurate defect-free coating with a low thermal affectation of the component. But in the case of WC cermet coatings due to its high laser absorption and the different mechanical and thermal properties between substrate and coating can appear a wide range of different defects as cracks, pores, massive carbide dilution and lacks of adherence. The aim of the present work is to study the metallurgical transformations during LC process of WC cermet coating on cold work tool steel substrate (EN 12379. Also it has been related process parameters with defects generation. Microstructure and composition of the coating and the heat affected zone have been analysed. Microhardness evolution profile has been obtained. Results show that although process parameters control reduce the generation of defects, in the deposition of overlapped layers appear different metallurgical transformations related with massive WC decomposition and the diffusion of alloying elements from substrate to the coating.

    Los materiales compuestos de matriz metálica reforzados con carburos, son conocidos por su elevada resistencia a todos los tipos de desgaste, debido a la combinación de las partículas duras en una matriz metálica tenaz. Diferentes tipos de estos materiales, se han empleado en el desarrollo de nuevas herramientas de corte de altas prestaciones. La técnica de láser cladding (LC, permite obtener recubrimientos libres de defectos sobre zonas muy concretas, con un aporte de calor muy localizado. Pero en el caso de carburos de wolframio (WC, debido a la enorme absorción de energía y la

  12. Inferencias sobre Grafos

    OpenAIRE

    Sira M. Allende; Carlos N. Bouza

    2002-01-01

    El estudio de un juego puede ser modelado asumiendo que solo algunas partidas son observadas. Entonces el árbol del juego debe ser estimado utilizando información muestral. Similarmente ocurre al obtener información sobre el comportamiento de las decisiones tomadas por individuos muestreados sobre un árbol de decisión teórico. Al considerar una medida de probabilidad que caracterice el comportamiento de redes aleatorias se puede obtener un estimado del árbol asociado. Este problema es el anal...

  13. Efeito do Hólmio YAG laser (Ho: YAG sobre o tendão patelar de ratos após 12 e 24 semanas de seguimento The effects of Holmium YAG laser (Ho:YAG on the patellar tendon of rats after 12 and 24 weeks of follow up

    Directory of Open Access Journals (Sweden)

    Waldo Lino Júnior

    2005-01-01

    Full Text Available Os autores estudaram os efeitos do laser Hólmio:Ítrio-Alumínio-Granada (Ho: YAG sobre as dimensões do tendão (comprimento e largura proximal e distal e sobre a celularidade e arranjo das fibras de colágeno em 20 ratos adultos, machos, brancos (Ratus Novergicus da varidade Wistar. Os animais foram divididos em dois grupos de acordo com o tempo de seguimento (12 e 24 semanas e de acordo com a forma de aplicação do laser (contínua e em dois pontos. Utilizou-se aparelho de laser de Hólmio (pulsátil, estado sólido, com ondas de 2,1 microns, com potência de 40 watts, ponteira OmniTip de 30º . Após o sacrifício, foram comparadas por meio de testes não paramétricos (considerando p = 0,05 as medidas de comprimento e da largura (proximal e distal dos tendões do lado operado e do lado não operado. A medida do comprimento do lado operado foi significativamente maior nos dois grupos de seguimento, quando comparado com o lado não operado, porém, não houve diferença significativa dessas medidas em função do tipo de aplicação do laser. Do mesmo modo, a medida da largura, tanto na região proximal quanto distal, foram significativamente maiores no lado operado nos dois grupos de seguimento, sem apresentar diferença significativa em função do tipo de aplicação. Quando se compararam as medidas nos dois grupos de seguimento, o comprimento e a largura distal tenderam a ser maiores após 24 semanas, enquanto que a largura, na região proximal, foi significativamente maior nesse grupo. Quanto à avaliação microscópica subjetiva, tanto nos cortes longitudinais como transversais, pôde-se verificar aumento do número de fibroblastos, principalmente no grupo de 12 semanas. A concentração média de fibroblastos nos tendões com 24 semanas de seguimento foi considerada como intermediário entre o grupo de 12 semanas e os tendões não operados. Na região entre os fascículos, o tecido conjuntivo era exuberante no grupo com 12 semanas

  14. He-Ne laser effects on blood microcirculation. An in vivo study through laser doppler flowmetry; Efeito do laser de helio neonio sobre a microcirculacao sanguinea durante a reparacao tecidual. Estudo in vivo por meio de fluxometria laser doppler

    Energy Technology Data Exchange (ETDEWEB)

    Nunez, Silvia Cristina

    2002-07-01

    Blood microcirculation performs an important function in tissue repair process, as well as in pain control, allowing for greater oxygenation of the tissues and the accelerated expulsion of metabolic products, that may be contributing to pain. Low Intensity Laser Therapy (LILT) is widely used to promote healing, and there is an assumption that it is mechanism of action may be due to an enhancement of blood supply. The purpose of this study was to evaluate, using laser Doppler flowmetry (LDF), the stated effects caused by radiation emitted by a He-Ne laser ({lambda}=632.8 nm) on blood microcirculation during tissue repair. To this end, 15 male mice were selected and received a liquid nitrogen provoked lesion, above the dorsal region, and blood flow was measured periodically, during 21 days. Due to radiation emission by the LDF equipment, a control group was established to evaluate possible effects caused by this radiation on microcirculation. To evaluate the He-Ne laser effects, a 1.15 J/cm{sup 2} dose was utilized, with an intensity of 6 mW/cm{sup 2}. The results obtained demonstrate flow alterations, provoked by the lesion, and subsequent inflammatory response. There was no statistical difference between the studied groups. As per the analysis of the results there is no immediate effect due the radiation emitted by a He Ne laser on microcirculation, although a percentage increase was observed in day 7 on medium blood flow rate in irradiated specimens. New studies are necessary to validate the use of this wavelength, in order to promote beneficial alterations in blood supply in radiated areas. (author)

  15. Sobre software libre

    OpenAIRE

    Matellán Olivera, Vicente; González Barahona, Jesús; Heras Quirós, Pedro de las; Robles Martínez, Gregorio

    2004-01-01

    220 p. "Sobre software libre" reune casi una treintena de ensayos sobre temas de candente actualidad relacionados con el software libre (del cual Linux es su ex- ponente más conocido). Los ensayos que el lector encontrará están divididos en bloques temáticos que van desde la propiedad intelectual o las cuestiones económicas y sociales de este modelo hasta su uso en la educación y las administraciones publicas, pasando por alguno que repasa la historia del software libre en l...

  16. Tributos sobre a folha ou sobre o faturamento? Efeitos quantitativos para o Brasil

    Directory of Open Access Journals (Sweden)

    Tiago V Cavalcanti

    2008-09-01

    Full Text Available Este artigo estuda os impactos alocativos e de bem-estar de uma reforma tributária que substitui os impostos sobre a folha de salários por outro que incide sobre a receita. Para isso, desenvolve-se um modelo neoclássico de crescimento econômico com impostos sobre a receita e sobre a folha de salários. As simulações com parâmetros da economia brasileira mostram que tal reforma tributária tem um efeito negativo no bem-estar, no estoque de capital de longo prazo e consequentemente no produto per capita de longo prazo. Contudo, o emprego aumenta.This paper studies the impacts of a tax reform which substitutes taxes on labor income by taxes on total revenue. In order to accomplish that, we construct and solve a general equilibrium neoclassical growth model with taxes on labor income and total revenue. The numerical simulations with Brazilian parameters show that such tax reforms would negatively affect welfare, the capital stock, and consequently per capita output. However, employment would increase. Such effects are quantitatively important.

  17. Nd:YAG laser in art works restoration

    Directory of Open Access Journals (Sweden)

    Flores, T.

    1998-04-01

    Full Text Available Laser cleaning in works of art has a number of advantages over traditional techniques of restoration. In this article, the technique used and the physical mechanisms that explain the process of ablation of pollutants are described. The results obtained in the cleaning of statues of marble and alabaster are exposed as well as oil-painting restoration. In this last specific case, the Nd:YAG laser is used with successful results.

    La limpieza de obras de arte por láser presenta una serie de ventajas sobre técnicas tradicionales de restauración. En el presente trabajo se describen la técnica empleada y los mecanismos físicos que explican el proceso de ablación de contaminantes. Se reportan los resultados alcanzados en la limpieza de estatuas de mármol y alabastro, así como en la restauración de pintura al óleo. En este último caso, se emplea por primera vez el láser de Nd:YAG con resultados ventajosos.

  18. Investigación educativa reciente sobre México

    OpenAIRE

    Núñez-DelaPeña, Francisco J.; Mejía-Arauz, Rebeca

    1985-01-01

    Se presenta una muestra de la investigación educativa sobre México: 22 disertaciones doctorales aceptadas en universidades norteamericanas entre 1982 y 1984. Dos estudios conciernen a la teoría del capital humano; cinco tratan diversos aspectos relacionados con la administración educativa; uno es sobre la televisión; otro sobre las habilidades fonéticas de los niños; uno más es sobre profesionalización de los médicos; cuatro tocan aspectos de política educativa; tres tratan sobre los maestros...

  19. Análisis sobre la factibilidad de implementar un producto de derivados sobre gas natural en Colombia

    OpenAIRE

    Dowd Aguirre, Jessica Alexandra; Tirado Naranjo, Lina María

    2012-01-01

    El objetivo de este trabajo es realizar un análisis sobre la factibilidad de implementar un producto de derivados sobre gas natural en Colombia dado el desarrollo del sector y la importancia de este hidrocarburo como fuente alternativa de generación eléctrica. 73 p. Contenido parcial: Situación actual del mercado de gas natural colombiano -- Expectativas del mercado de gas natural colombiano -- Mercados de derivados sobre gas natural en Europa y Estados Unidos -- Mercado de gas natural ...

  20. Inferencias sobre Grafos

    Directory of Open Access Journals (Sweden)

    Sira M. Allende

    2002-05-01

    Full Text Available El estudio de un juego puede ser modelado asumiendo que solo algunas partidas son observadas. Entonces el árbol del juego debe ser estimado utilizando información muestral. Similarmente ocurre al obtener información sobre el comportamiento de las decisiones tomadas por individuos muestreados sobre un árbol de decisión teórico. Al considerar una medida de probabilidad que caracterice el comportamiento de redes aleatorias se puede obtener un estimado del árbol asociado. Este problema es el analizado en este trabajo. Algunos resultados experimentales obtenidos usando Recocido Simulado ilustran el procedimiento. Su papel en el estudio de modelos económicos y de mercadeo es discutido.

  1. Conocimientos sobre incontinencia urinaria en pacientes hospitalizados

    Directory of Open Access Journals (Sweden)

    Otto Guillen Lopez

    2003-10-01

    Full Text Available Objetivo: Determinar el nivel de conocimientos sobre incontinencia urinaria (IU en pacientes hospitalizados. Material y métodos: Estudio transversal, descriptivo; se entrevistó una muestra por saturación de 325 pacientes hospitalizados de 30 años a más del Hospital Nacional Cayetano Heredia (HNCH, Lima - Perú, utilizando un cuestionario de conocimientos sobre incontinencia, considerándose como adecuado conocimiento cuando había más de 50% de aciertos en él. Resultados: Solamente 35.7% tuvieron conocimiento adecuado sobre IU. Hasta 90% conocía acerca del éxito del tratamiento y posibilidad de curación de los pacientes incontinentes. Sin embargo, 75% consideraron erróneamente que la IU era consecuencia inevitable del envejecimiento, mientras menos de 50% de pacientes conocía el papel de ciertos medicamentos y ejercicios en la IU. Conclusiones: Se demostró un pobre conocimiento general sobre la IU, siendo necesaria una intervención de los profesionales de la salud en la educación de la población, sobre todo hospitalizada y con factores predisponentes para desarrollar IU, para así poder modificar las ideas erróneas que existen sobre el tema. (Rev Med Hered 2003; 14: 186-194.

  2. Análise do desempenho motor em tarefas de "timing" antecipatório em idosos praticantes de esportes de interceptação Análisis del desempeño motor en las tareas de "timing" de previsión en ancianos practicantes de deporte de interceptación Analysis of motor performance in timing anticipatory tasks in elderly practioners of interception sports

    Directory of Open Access Journals (Sweden)

    Francys Paula Cantieri

    2012-06-01

    Full Text Available O objetivo do presente estudo foi analisar o efeito da prática de esporte de interceptação no desempenho em uma tarefa complexa de "timing" antecipatório em idosos. Participaram do estudo 73 indivíduos, distribuídos em três grupos: idosos atletas, idosos não atletas e adultos jovens. A tarefa consistiu na execução de uma sequência de toques em quatro sensores, realizados simultaneamente ao deslocamento do estímulo, de modo que o último toque coincidisse com o acendimento do último diodo. Foram utilizadas três velocidades de acendimento dos diodos (1 m/s, 1,5 m/s, 2,2 m/s, sendo realizadas 10 tentativas em cada velocidade. O desempenho foi analisado por meio do cálculo do erro constante, erro variável e erro absoluto. Os resultados indicaram efeito positivo da prática de esporte sobre o desempenho do "timing" antecipatório em idosos atletas. Houve também, efeito da variação da velocidade do estímulo, com os melhores desempenhos dos grupos na velocidade moderada.Análisis del desempeño motor en las tareas de "timing" de previsión en ancianos practicantes de deporte de interceptación El objetivo de este estudio fue analizar el efecto de la practica de deportes de intercepción en el desempeño en una tarea compleja de "timing" de previsión en ancianos. Participaron de este estudio 73 pacientes divididos en tres grupos: ancianos deportistas, ancianos no-deportistas y jóvenes. La tarea consistió en la ejecución de una secuencia de toques en cuatro sensores, realizados simultáneamente con el desplazamiento del estímulo, de modo que el último toque coincidiese en con el encendimiento del último diodo. Se utilizaron tres velocidades de encendimiento de los diodos (1 m / s 1,5 m / s 2,2 m / s, siendo efectuados diez intentos en cada velocidad. El rendimiento fue analizada mediante el cálculo de la constante de error, del error variable y del error absoluto. Los resultados indicaron efecto positivo de la pr

  3. New solid laser: Ceramic laser. From ultra stable laser to ultra high output laser

    International Nuclear Information System (INIS)

    Ueda, Kenichi

    2006-01-01

    An epoch-making solid laser is developed. It is ceramic laser, polycrystal, which is produced as same as glass and shows ultra high output. Ti 3+ :Al 2 O 3 laser crystal and the CPA (chirped pulse amplification) technique realized new ultra high output lasers. Japan has developed various kinds of ceramic lasers, from 10 -2 to 67 x 10 3 w average output, since 1995. These ceramic lasers were studied by gravitational radiation astronomy. The scattering coefficient of ceramic laser is smaller than single crystals. The new fast ignition method is proposed by Institute of Laser Engineering of Osaka University, Japan. Ultra-intense short pulse laser can inject the required energy to the high-density imploded core plasma within the core disassembling time. Ti 3+ :Al 2 O 3 crystal for laser, ceramic YAG of large caliber for 100 kW, transparent laser ceramic from nano-crystals, crystal grain and boundary layer between grains, the scattering coefficient of single crystal and ceramic, and the derived release cross section of Yb:YAG ceramic are described. (S.Y.)

  4. The influence of low-level laser therapy on biomodulation of collagen and elastic fibers A influência da terapia a laser de baixa densidade de energia na biomodulação das fibras colágenas e elásticas

    Directory of Open Access Journals (Sweden)

    Lívia Souza Pugliese

    2003-12-01

    Full Text Available The study of low-level laser therapy upon extracellular matrix elements is important to understand the wound healing process under this agent. However, little is known about the interference of laser light in relation to collagen and elastic fibers. Cutaneous wounds were performed on the back of 72 Wistar rats and a Ga-Al-As low-level laser was punctually applied with different energy densities. The animals were killed after 24, 48, 72 hours and 5, 7 and 14 days. Tissues were stained with hematoxilin-eosin, sirius red fast green and orcein and then analyzed. It was observed that the treated group exhibited larger reduction of edema and inflammatory infiltrate. The treated animals presented a larger expression of collagen and elastic fibers, although without statistical significance (p > 0.05. Treatment with a dosage of 4 J/cm² exhibited more expressive results than that with 8 J/cm². In this study, the authors concluded that low-level laser therapy contributed to a larger expression of collagen and elastic fibers during the early phases of the wound healing process.O estudo da terapia a laser de baixa densidade de energia sobre os diversos constituintes da matriz extracelular é crucial para o entendimento do processo cicatricial sob esse agente. Todavia, pouco se sabe sobre a interferência do laser em relação às fibras colágenas e elásticas. Realizaram-se ferimentos cutâneos padronizados no dorso de setenta e dois ratos Wistar e, em seguida, aplicação pontual do raio laser de baixa potência do tipo Arseneto de Gálio-Alumínio (Ga-Al-As com diferentes densidades de energia. Os animais foram sacrificados com 24, 48 e 72 horas e aos 5, 7 e 14 dias. Procedeu-se à análise das secções teciduais coradas por hematoxilina-eosina, sírius vermelho e orceína. Observou-se, que nos grupos submetidos à terapia a laser, houve maior redução do edema e infiltrado inflamatório. Os animais tratados apresentaram uma maior expressão de fibras

  5. DISERTACIÓN SOBRE JUSTICIA Y EQUIDAD

    Directory of Open Access Journals (Sweden)

    Sayuri P. Tamura M.

    2001-01-01

    Full Text Available «Disertación sobre equidad y justicia» es básicamente una respuesta a una inquietud en particular que yo tenía sobre las distintas posiciones que existen sobre estos dos temas y cómo definir cuál es la más acertada. Hice una descripción del punto de vista de Amartya Sen –la violación de los derechos sobre la propiedad privada es justificable si evitan las hambrunas2– frente al de Robert Nozick –la propiedad privada es un derecho fundamental y como tal debe ser respetado3–, sin embargo, aunque ambos enfoques son totalmente contrarios tienen mucho sentido, por lo cual es bastante difícil decidirse por uno en particular. Fue de esta forma, enfrentando sus opiniones, que yo logré desarrollar una posición frente a estas dos perspectivas, y así dar mi opinión al DISERTACIÓN SOBRE JUSTICIA Y EQUIDAD SAYURI P. TAMURA M. Estudiante de Economía y Negocios Internacionales de la Universidad ICESI. respecto. Al final, llegué a una conclusión, que aunque no es la más original y tampoco es la única, tiene mucho sentido y seguramente de ser posible, la situación del país podría cambiar para bien.

  6. Laser melting treatment of Ni-P surface alloys on mild steel. Influence of initial coating thickness and laser scanning rate

    Directory of Open Access Journals (Sweden)

    García-Alonso, M. C.

    1997-08-01

    Full Text Available Different thickness Ni-P coatings deposited on mild steel are submitted to laser surface melting at different scanning rates. The microstructure of the alloys is characterized by optical and scanning electron microscopy and microprobe analysis. It is shown that both the initial coating thickness and the laser scanning rate have an influence on the shape, extent and size of the different structures resulting from the solidification process. Thus, when the laser scanning rate increases a progressive refinement of the structure takes place that could even totally block the dendritic growth produced during solidification for a high initial coating thickness.

    Recubrimientos de Ni-P, con distinto espesor, depositados sobre un acero microaleado fueron tratados con láser a diferentes velocidades de barrido. La microestructura, tanto del recubrimiento como del acero base, ha sido caracterizada por microscopía óptica y electrónica y por microanálisis. En el proceso de solidificación se han obtenido distintas estructuras que varían en cuanto a la forma, extensión y tamaño dependiendo del espesor inicial de recubrimiento y de la velocidad de barrido del haz láser. A medida que la velocidad del haz aumenta, se produce un refinamiento progresivo de la microestructura dendrítica y, en casos extremos de alto espesor de recubrimiento y velocidades grandes, este crecimiento dendrítico se bloquea.

  7. Somos un envase : Discursos sobre el aborto

    OpenAIRE

    Löcher, Jennifer Irene

    2014-01-01

    No hay persona que no tenga opinión acerca del asunto y, cada vez más, la sociedad argentina debate sobre la pregunta de si se debe legalizar/despenalizar el aborto o no. Nunca antes se habló tanto sobre el tema públicamente: se publican artículos en los diarios, hay manifestaciones a favor y hay manifestaciones en contra de la legalización del aborto. El siguiente trabajo pretende relevar y analizar discursos que circulan socialmente alrededor del debate sobre el aborto. (Párrafo extraíd...

  8. Study in vitro of dental enamel irradiated with a high power diode laser operating at 960 nm: morphological analysis of post-irradiation dental surface and thermal effect analysis in pulp chamber due to laser application; Estudo in vitro do esmalte dental irradiado com laser de diodo de alta potencia em 960 nm: analise morfologica da superficie dental pos-irradiada e analise do comportamento termico na camara pulpar devido a aplicacao laser

    Energy Technology Data Exchange (ETDEWEB)

    Quinto Junior, Jose

    2001-07-01

    Objectives: This study examines the structural and thermal modifications induced in dental enamel under dye assisted diode laser irradiation. The aim of this study is to verify if this laser-assisted treatment is capable to modify the enamel surface by causing fusion of the enamel surface layer. At the same time, the pulpal temperature rise must be kept low enough in order not to cause pulpar necrosis. To achieve this target, it is necessary to determine suitable laser parameters. As is known, fusion of the enamel surface followed by re-solidification produce a more acid resistant layer. This surface treatment is being researched as a new method for caries prevention. Method and Materials: A series of fourteen identically prepared enamel samples of human teeth were irradiated with a high power diode laser operating at 960 nm and using fiber delivery. Prior to irradiation, a fine layer of cromophorous ink was applied to the enamel surface. In the first part of the experiment the best parameter for pulse duration was determined. In the second part of the experimental phase the same energy density was used but with different repetition rates. During irradiation we monitored the temperature rise in the pulpal cavity. The morphology of the treated samples was analysed under SEM. Results: The morphology of the treated samples showed a homogeneously re-solidified enamel layer. The results of the temperature analysis showed a decrease of the pulpal temperature rise with decreasing repetition rate. Conclusion: With the diode laser it is possible to cause morphological alterations of the enamel surface, which is known to increase the enamel resistance against acid attack, and still maintain the temperature rise in the pulpar chamber below damage threshold. (author)

  9. Resistencia a la oxidación de aleaciones Ni-Cr-Al plaqueadas por láser sobre aceros al carbono e inoxidables austeníticos

    Directory of Open Access Journals (Sweden)

    de Damborenea, J.

    1995-04-01

    Full Text Available Laser surface cladding has been carried out by means of a 5 kW CO2 continuous wave laser on both a mild and a stainless steel. A powder injection technique has been used to deliver a Ni-Cr-Al alloy onto the steel molten pool. After processing, samples were analyzed by optical and scanning electron microscopy in order to know the microstructure and composition of present phases. High temperature corrosion resistance tests were done in an oxidant environment at temperatures of 950 °C. Phase transformations and corrosion behaviour are discussed. A general conclusion is the suitability of these alloys to bear oxidation due to the formation of protective oxide layers on their surface.

    Se realiza un estudio sobre la obtención de recubrimientos de superficie mediante un láser continuo de CO2 de 5 kW de potencia de salida. Mediante la técnica de inyección de partículas, se realizaron plaqueados en superficie de Ni-Cr-Al sobre un acero suave y otro inoxidable de tipo 316. Tras el procesado, se estudió la microestructura de las probetas obtenidas. Posteriormente, se procedió a su ensayo en atmósfera oxidante a 950 °C, observándose la evolución de la microestructura, la formación de las capas de óxido y la cinética del proceso. Como conclusión general, destaca, independientemente de la base sobre la que se obtienen los recubrimientos, la gran resistencia del material a la oxidación, seguramente debida a la formación de capas de alúmina que actúan como barreras frente al ataque del oxidante.

  10. Trayectorias (sobre ruedas): un ensayo visual sobre los carritos de supermercado en la ciudad

    OpenAIRE

    Cruz, Edgar Gómez

    2014-01-01

    El siguiente trabajo es un breve bosquejo de las posibilidades del concepto de trabajo “trayectoria”. Una trayectoria no es sólo, en el sentido literal del término, el trazo del movimiento sobre un camino, sino que busca establecer una reflexión sobre las posibilidades de recolección de registros visuales/digitales/móviles para la investigación etnográfica desde la aleatoriedad del movimiento por la ciudad. El concepto de trayectoria busca dialogar con el de “flâneur” de De Certeau y Benjamin...

  11. Los derechos de autor sobre obtenciones vegetales

    Directory of Open Access Journals (Sweden)

    Rosario Silva Gilli

    2015-01-01

    Full Text Available Contenido: Las creaciones en la agricultura. Los derechos de autor sobre obtenciones vegetales. El Convenio Internacional para la protección de las obtenciones vegetales (París 1961 y sus revisiones de Ginebra 1972, 1978,1991 Objeto de la protección legal. Condiciones del cultivar. Alcance de la protección. La protección de obtenciones vegetales en el Mercosur. Los Derechos de autor en el Mercosur. El Protocolo de Armonización de normas sobre Propiedad Intelectual en el Mercosur. El Acuerdo de Cooperación y facilitación sobre la protección de las obtenciones vegetales en los Estados Partes del Mercosur.  Alcance de la normativa Mercosur. Los Derechos sobre cultivares en Uruguay. Los Derechos de autor como derechos humanos. ¿Derechos de autor vs. derecho de propiedad intelectual? Reflexión final

  12. Ensaios sobre economia do empreendorismo

    OpenAIRE

    Gabrielito Rauter Menezes

    2015-01-01

    Esta tese é composta por três ensaios sobre Economia do Empreendedorismo. O primeiro deles trata sobre os determinantes do empreendedorismo no Brasil a partir de modelos de escolha ocupacional, usando os microdados da Pesquisa Nacional por Amostra por Domicílios (PNAD) do ano de 2012. A estratégia empírica adotada empregou os modelos de escolha discreta na estimação da escolha ocupacional. Os resultados demonstraram que existem efeitos significativos para as variáveis: anos de estudos iniciai...

  13. Lipólisis láser y liposucción en ginecomastia: retracción cutánea eficaz y segura Laser-assisted lipolysis for gynecomastia: safe and effective skin retraction

    Directory of Open Access Journals (Sweden)

    Mario Trelles

    2013-02-01

    Full Text Available OBJETIVO: Valorar la eficacia de la lipólisis-láser para corregir el volumen, flacidez y excedente cutáneo sin escisión. MÉTODOS: Prospectivamente, en 32 pacientes con ginecomastia, bajo anestesia tumescente y sedación se realizó lipólisis con láser de diodo 980nm, 15W en emisión continua, 8kJ a 12kJ de energía por mama. Externamente se utilizó aire frío para protección de la piel. Después se utilizó lipoaspiración convencional. No se emplearon drenajes pero si vendaje compresivo. Los pacientes evaluaron los resultados en una escala visual analógica. Dos médicos evaluaron los resultados por fotografías de antes y seis meses después, y midieron las areolas y contorno torácico. RESULTADOS: Veintitrés pacientes consideraron los resultados como Muy Bueno, siete Bueno y dos Regular. La retracción cutánea en la areola fue notable un mes después de la intervención y fue máxima a los seis meses. La valoración de los médicos fue 26 Muy Bueno, cinco Bueno y un Regular. No existieron quemaduras, isquemia, ni lesiones en areolas o pezón. CONCLUSIÓN: La liposucción asistida por láser es eficaz y de ejecución sencilla, poco traumática y permite una temprana reintegración a las actividades.OBJECTIVES: To evaluate efficacy of laser lipolysis in the treatment of gynecomastia to correct breast volume, flaccidity and excess skin without its excision. METHODS: Prospectively, 32 patients with gynecomastia under tumescent anaesthesia and sedation underwent laser lipolysis with 980nm diode laser, 15W continuous emission and 8 to 12 kJ energy per breast. Externally cold air was used to protect the skin. No drainages were used but a compressive bandage. Patients evaluated results on a VAS scale. Two doctors evaluated results comparing before and 6 month after photographs and also measured the areola and chest diameter. RESULTS: Twenty three patients considered results as Very Good, 7 Good and 2 Fair Cutaneous retraction of the areola

  14. Laser-diode pumped Nd:YAG lasers; Laser diode reiki Nd:YAG lasear

    Energy Technology Data Exchange (ETDEWEB)

    Yuasa, H.; Akiyama, Y.; Nakayama, M. [Toshiba Corp., Tokyo (Japan)

    2000-04-01

    Laser-diode pumped Nd:YAG lasers are expected to be applied to laser processing fields such as welding, cutting, drilling, and marking due to their potential for high efficiency and compactness. We are designing and developing laser-diode pumped Nd:YAG lasers using numerical analysis simulation techniques such as ray tracing and thermal analysis. We have succeeded in achieving a laser power of more than 3 kW with 20% efficiency, which is the best ever obtained. In addition, we have developed a laser-diode pumped green laser by second harmonic generation, for precision machining on silicon wafers. (author)

  15. Evaluation of temperature variation in pulp chamber after high power diode laser irradiation ({lambda}=830 nm) on dental enamel: 'in vitro' study; Avaliacao da variacao da temperatura na camara pulpar apos a irradiacao de diodo laser de alta potencia de 830 nanometros em esmalte dental: estudo 'in vitro'

    Energy Technology Data Exchange (ETDEWEB)

    Macri, Rodrigo Teixeira

    2001-07-01

    The aim of this study was to observe the variation of temperature in the pulp chamber caused by irradiation of a commercial diode laser operating in continuous wave with wavelength 830 nm over the dental enamel. In the first part of this study, two types of tooth models were tested: 3,5 mm slice and whole tooth. In the second part, we irradiated the buccal si de of the enamel in 2 primary lower incisors from cattle with Opus 10 diode laser for 10 s with power levels of 1 W and 2 W, always using an absorber. Two thermocouples were used. The first one was inserted in the dentin wall closest to the irradiation site, while the second was inserted in the middle of the pulp chamber. It was observed that the thermocouples registered different temperatures. Always, the dentin thermocouple registered higher temperatures. Considering the dentin records, the irradiation of 1 W for 10 s can be safe for the pulp. Further studies must be developed related to the correct positioning of the thermocouples inside the pulp chamber. This was a first step of using diode laser in enamel, and in this study, we concluded that the Opus 10 diode laser shown to be safe for this use, with 1 W power for 10 S. (author)

  16. Recursos y enlaces sobre comunidades de aprendizaje

    OpenAIRE

    Ferrer Esteban, Gerard

    2005-01-01

    Obras y artículos sobre el proyecto Comunidades de Aprendizaje desarrollado en el Estado español. Tesis doctorales sobre comunidades de aprendizaje. Fundamentación teórica de las comunidades de aprendizaje. Sitios en Internet relacionados con las comunidades de aprendizaje y proyectos afines de desarrollo comunitario en contextos escolares.

  17. FILTRAGEM DE NUVEM LASER PARA GERAÇÃO DE MDT POR KRIGAGEM

    Directory of Open Access Journals (Sweden)

    Vanessa Jordão Marcato Fernandes

    Full Text Available Esse artigo apresenta um método de filtragem de nuvem de pontos LASER para obtenção de um Modelo Digital de Terreno (MDT. O processo de filtragem é realizado com base em uma superfície aproximada gerada a partir de pontos amostrados sobre vias urbanas. Esses pontos são determinados por meio de linhas detectadas na imagem de intensidade do pulso laser via detector de Steger. A principal suposição do método é que o terreno tem um comportamento suave no interior das quadras e, dessa forma, os pontos amostrados ao longo das vias permitem, utilizando o método de interpolação por krigagem, uma representação adequada do terreno no interior das quadras, ou seja, relativamente próxima dos pontos LASER de terreno dessas regiões. Assim, a filtragem é realizada pela verificação da proximidade dos pontos da nuvem LASER original com a superfície aproximada gerada. Por fim, um MDT é obtido da nova amostra pelo método de interpolação por krigagem, melhorando a descrição da superfície. A partir dos experimentos realizados foi possível verificar a viabilidade do método proposto, com resultados de boa coerência visual e indicadores numéricos satisfatórios

  18. Lasers '89

    International Nuclear Information System (INIS)

    Harris, D.G.; Shay, T.M.

    1990-01-01

    This book covers the following topics: XUV, X-Ray and Gamma-Ray Lasers, excimer lasers, chemical lasers, nuclear pumped lasers, high power gas lasers, solid state lasers, laser spectroscopy. The paper presented include: Development of KrF lasers for fusion and Nuclear driven solid-state lasers

  19. Ventajas de la cicatrización cutánea asistida por láser (LASH Advantages of laser assisted scar healing (LASH

    Directory of Open Access Journals (Sweden)

    S. Mordon

    2011-12-01

    Full Text Available La fase final de toda cirugía es la sutura y su cicatriz correspondiente y, frecuentemente, ésta es la única secuela visible de una intervención. La técnica LASH (cicatrización cutánea asistida por láser, estimula los mecanismos de reparación de la piel por efecto térmico, condicionando la calidad de la cicatrización. Estudios experimentales en ratones comparando los resultados obtenidos en heridas quirúrgicas radiadas con laser diodo 810 nm tras ser suturadas, con los obtenidos en igual tipo de heridas suturadas de manera convencional, han demostrado que se consiguen cicatrices mucho menos visibles cuando se practica el tratamiento con láser. La histología confirma, comparativamente, una notable aceleración del proceso cicatricial con modificación del TGFβ (Transforming Growth Factor-Beta directamente implicado en la reparación tisular, en los animales en los que la sutura fue asistida por láser. Igualmente, el análisis tensiométrico demostró mayor resistencia a la acción de estiramiento mecánico en estas heridas. Estudios clínicos en pacientes sometidos a dermolipectomia, reducción mamaria y estiramiento facial, demuestran que al tratar con LASH una parte o una de las líneas de sutura, los análisis realizados tanto por los pacientes como por cirujanos independientes a los 8 días, 3 meses y un año, evidencian resultados más favorables para la técnica láser, Las dosis eficaces determinadas para las fluencias láser están entre 80 y 120 J/cm². La técnica LASH es simple de efectuar, reproducible, rápida y ofrece una clara evidencia de que es posible reducir considerablemente la cicatriz, logrando que ésta sea de mejor calidad y más estética.Suture is the final stage of surgery and as a consequence, a scar is frequently the only visible effect after an operation. LASH technique (Laser Assisted Scar Healing produces thermal effects to stimulate mechanisms for tissue repair that will determine the quality of

  20. Laser safety at high profile laser facilities

    International Nuclear Information System (INIS)

    Barat, K.

    2010-01-01

    Complete text of publication follows. Laser safety has been an active concern of laser users since the invention of the laser. Formal standards were developed in the early 1970's and still continue to be developed and refined. The goal of these standards is to give users guidance on the use of laser and consistent safety guidance and requirements for laser manufacturers. Laser safety in the typical research setting (government laboratory or university) is the greatest challenge to the laser user and laser safety officer. This is due to two factors. First, the very nature of research can put the user at risk; consider active manipulation of laser optics and beam paths, and user work with energized systems. Second, a laser safety culture that seems to accept laser injuries as part of the graduate student educational process. The fact is, laser safety at research settings, laboratories and universities still has long way to go. Major laser facilities have taken a more rigid and serious view of laser safety, its controls and procedures. Part of the rationale for this is that these facilities draw users from all around the world presenting the facility with a work force of users coming from a wide mix of laser safety cultures. Another factor is funding sources do not like bad publicity which can come from laser accidents and a poor safety record. The fact is that injuries, equipment damage and lost staff time slow down progress. Hence high profile/large laser projects need to adapt a higher safety regimen both from an engineering and administrative point of view. This presentation will discuss all these points and present examples. Acknowledgement. This work has been supported by the University of California, Director, Office of Science.

  1. Ação do laser de Nd:YAG intracanal sobre endotoxinas na dentina radicular

    OpenAIRE

    Jose Ricardo de Freitas Archilla

    2007-01-01

    As endotoxinas são responsáveis por importantes reações sistêmicas e locais, podendo comprometer o sucesso do tratamento endodôntico. O hidróxido de cálcio, mesmo com limitações, mostra-se como opção única efetiva entre as soluções irrigadoras e as medicações intracanal na redução das endotoxinas nos túbulos dentinários. O experimento realizado avaliou a eficiência do laser de Nd:YAG frente à uma endotoxina inoculada no canal radicular pela utilização de duas cinemáticas de irradiação. Após u...

  2. La ceguera como motivo en Ensayo sobre la ceguera de José Saramago e Informe sobre ciegos de Ernesto Sábato

    OpenAIRE

    Fonseca, Marco Antonio

    2008-01-01

    El trabajo de investigación, El motivo de la ceguera en el Ensayo sobre la ceguera de José Saramago e Informe sobre ciegos de Ernesto Sábato, analiza desde el área y la metodología de la literatura comparada el uso del motivo literario de la ceguera en los dos textos mencionados, resaltando las similitudes y diferencias del tratamiento del motivo dentro de las dos obras y como éste sostiene una serie de obsesiones e ideas sobre el estado actual del mundo que comparten los autores de las dos n...

  3. Laser in urology. Laser i urologien

    Energy Technology Data Exchange (ETDEWEB)

    Breisland, H.O. (Aker Sykehus, Oslo (Norway))

    1991-09-01

    The neodymium YAG laser is particularly suited for endoscopic urologic surgery because the YAG laser light can be conducted in flexible fibers. Superficial bladder tumours can be treated under local anaesthesia in the outpatient department. The frequency of local recurrences is low, significantly lower than after electrosection or electrocoagulation. Selected cases of T2-muscle invasive bladder tumours can be cured with laser coagulation applied subsequently to transurethral resection. Combined treatment with electrosection and laser coagulation of localized prostatic cancer is a promising method which compares favourably with results obtained by other treatment modalities. Tumours in the upper urinary tract can be laser-treated through ureteroscopes or nephroscopes, but the treatment should be limited to low stage, low grade tumours. Laser is the treatment of choice for intraurethral condylomatas. Laser treatment of penil carcinoma gives excellent cosmetic and functional results and few local recurrences. Laser lithotripsy is a new technique for treatment of ureteric stones and photodynamic laser therapy is a promising tecnique for treatment of carcinoma in situ in the bladder empithelium. However, neither of these techniques are available for clinical use in Norway as yet. 17 refs., 3 figs., 1 tabs.

  4. O DISCURSO OFICIAL SOBRE A CRIANÇA NO BRASIL

    Directory of Open Access Journals (Sweden)

    Carla Letuza Moreira e Silva

    2016-09-01

    Full Text Available Este estudo é um recorte da tese de doutoramento apresentada em 2012, no Programa de Pós-Graduação e Letras e Linguística da Universidade Federal de Alagoas (UFAL, em Maceió, sobre os discursos da/sobre a criança e as infâncias, no Brasil. O objetivo central é o de apresentar os efeitos de sentido que demandam dos dizeres oficiais no Estatuto da Criança e do Adolescente (ECA, 1990 em vigor no Brasil, sobre a criança, e que determinam modos de pensar e agir sobre as crianças e a infância na contemporaneidade. As noções de sujeito e formação discursiva da análise do discurso francesa (AD, iniciada em Pêcheux (1997, permeiam as análises e elucidam os papéis históricos e ideológicos que determinam e são determinados nos/pelos dizeres dos discursos da/sobre. Faz-se necessário, portanto, adentrar os discursos da e sobre a criança e a infância para entender as contradições e os confrontos dos discursos entre dizeres e silenciamentos.

  5. Variaciones sobre el concepto de ética

    OpenAIRE

    Pérez Oliva, Elizabeth; Velasco, José Armando

    2007-01-01

    A lo largo de la historia, pensadores han dado ideas y teorías sobre la ética, pero todos concuerdan en que es una arte de la filosofía que trata de los actos morales, normas de conducta sobre el bien y el mal en el ser humano; término desarrollado a través del tiempo.

  6. Laser system using ultra-short laser pulses

    Science.gov (United States)

    Dantus, Marcos [Okemos, MI; Lozovoy, Vadim V [Okemos, MI; Comstock, Matthew [Milford, MI

    2009-10-27

    A laser system using ultrashort laser pulses is provided. In another aspect of the present invention, the system includes a laser, pulse shaper and detection device. A further aspect of the present invention employs a femtosecond laser and binary pulse shaping (BPS). Still another aspect of the present invention uses a laser beam pulse, a pulse shaper and a SHG crystal.

  7. Application of Various Lasers to Laser Trimming Resistance System

    Institute of Scientific and Technical Information of China (English)

    SUN Ji-feng

    2007-01-01

    Though the laser trimming resistance has been an old laser machining industry for over 30 years, the development of technology brings new alternative lasers which can be used for the traditional machining. The paper describes application of various lasers to laser trimming resistance system including early traditional krypton arc lamp pumped Nd:YAG to laser, modern popular diode pumped solid state laser and the present advanced harmonic diode pumped solid state laser. Using the new alternative lasers in the laser trimming resistance system can dramatically improve the yields and equipment performance.

  8. Escrito sobre el cuerpo

    Directory of Open Access Journals (Sweden)

    Antonio Malalana Ureña

    2013-09-01

    Full Text Available El catálogo, en una edición bilingüe español-inglés, es una pequeña guía de la exposición Shirin Neshat. Escrito sobre el cuerpo, muestra que se integra dentro de los actos de PHOTOESPAÑA13, el festival internacional de fotografía y artes visuales. El esquema del libro es sencillo y los textos son extremadamente divulgativos. El primero de ellos, Escrito sobre el cuerpo (pp. 10-15, cuyo autor es Octavio Zaya, comisario de la exposición, resume la trayectoria de esta intelectual, que "interactúa" con la fotografía y los formatos audiovisuales, y nos presenta la argumentación narrativa de los documentos expuestos, contextualizando la obra recopilada.

  9. Laser optically pumped by laser-produced plasma

    International Nuclear Information System (INIS)

    Silfvast, W.T.; Wood, O.R. II.

    1975-01-01

    Laser solids, liquids and gases are pumped by a new technique in which the output from an efficient molecular laser, such as a CO 2 laser, ionizes a medium, such as xenon, into a generally cylindrical plasma volume, in proximity to the pumped laser body. Breakdown yields a visible and ultraviolet-radiation-emitting plasma in that volume to pump the laser body. The spectral radiance of the plasma is significantly higher than that produced by a dc-discharge-heated plasma at nearly all wavelengths in the plasma spectrum. The risetime of radiation from the laser-produced plasma can also be significantly shorter than that of a dc heated plasma. A further advantage resides in the fact that in some applications the attenuating walls needed by flashlamps may be eliminated with the result that laser threshold is more readily reached. Traveling wave excitation may be provided by oblique incidence of the pumping laser beam through the ionizable medium to create sequential ionization of portions of that medium along the length of the pumped laser body. (auth)

  10. Diode laser-pumped Ho:YLF laser

    International Nuclear Information System (INIS)

    Hemmati, H.

    1987-01-01

    The author reports laser action in Ho:YLF at 2.06 μm following optical pumping with a cw diode laser array. Diode laser-pumped Nd-YAG and Ho:YAG have been reported recently. Lasers with a wavelength of 2 μm have medical and optical communication applications. The diode laser light is focused with a 60-mm focal length lens onto the YLF crystal. A high-reflectivity mirror with 100-mm radius of curvature was used as the output coupler. The lasing threshold was at 5 mWof incident power. This is higher than expected considering that a high reflector was used as the output coupler. However, a more uniform cooling of the crystal is expected to lower the lasing threshold. With 100 mW of pump power coupled into the crystal, --20 mW of 2-μm radiation was observed from this unoptimized setup. The 2-μm laser output is highly sensitive to output coupler alignment, YLF crystal temperature, and pump laser wavelength. The 20% optical conversion efficiency achieved in his preliminary measurements is expected to be improved by better crystal cooling, proper matching of laser wavelength to crystal absorption, variations in the concentration of Ho and sensitizers and use of a proper output coupler. A study of the parameters mentioned above and the effect of crystal temperature on the laser output is under way

  11. SOLUTION OF THE MATHEMATICAL MODEL OF A NONLINEAR DIRECT CURRENT CIRCUIT USING PARTICLE SWARM OPTIMIZATION

    Directory of Open Access Journals (Sweden)

    IVÁN AMAYA

    2012-01-01

    Full Text Available El presente artículo describe una estrategia numérica orientada hacia la solución de sistemas de ecuaciones no lineales que con frecuencia aparecen en el análisis de circuitos electrónicos. Esta estrategia se fundamenta en el uso del algoritmo de optimización de enjambre de partículas (PSO, como alternativa al tradicionalNewton-Raphson. Se tomó inicialmente, a título de ejemplo demostrativo, un circuito compuesto de dos resistencias lineales y un diodo. Seguidamente se utiliza otro ligeramente más complejo, constituido por una fuente de corriente, cuatro resistencias y dos diodos. Se encontró que el PSO posee mayor robustez frente al método tradicional. Fundamentado en estos resultados, se observó que esta alternativa de solución tiene características muy atractivas cuando se requiere solucionar este tipo de circuitos independientemente de su tamaño y complejidad.

  12. Lasers for the SILVA laser isotope separation process

    International Nuclear Information System (INIS)

    Lapierre, Y.

    1997-01-01

    The main principles of the laser isotope separation process for the production of enriched uranium at lower cost, are reviewed and the corresponding optimal laser characteristics are described. The development of the SILVA laser isotope separation process involved researches in the various domains of pump lasers, dye lasers, laser and optics systems and two test facilities for the feasibility studies which are expected for 1997

  13. Deformaciones faciales y sus influencias sobre el psiquismo

    Directory of Open Access Journals (Sweden)

    Guillermo Nieto Cano

    1957-04-01

    Full Text Available Creemos haber dejado establecido, en síntesis, que todas las minusvalías físicas repercuten sobre el psiquismo, y que entre éstas las deformaciones faciales, por su ostentosa evidencia, son las que afectan más seriamente al individuo y modifican por eso más radicalmente su conducta, incidiendo así, en forma trascendental, sobre la colectividad. Tales defectos constituyen, por consiguiente, un serio problema humano, cuyo estudio y remedio incumbe no solamente al esteta cirujano, sino que interesa a todos aquellos que puedan influir sobre la estabilidad armónica y la buena marcha de la sociedad en que viven.

  14. Development of frequency tunable Ti:sapphire laser and dye laser pumped by a pulsed Nd:YAG laser

    International Nuclear Information System (INIS)

    Yi, Jong Hoon; Horn, Roland; Wendt, K.

    2001-01-01

    We investigated lasing characteristics of two kinds of tunable laser, liquid dye laser and solid Ti:sapphire crystal laser, pumped by high pulse repetition rate Nd:YAG laser. Dye laser showed drastically reduced pulsewidth compared with that of pump laser and it also contained large amount of amplified spontaneous emission. Ti:sapphire laser showed also reduced pulsewidth. But, the laser conversion pump laser and Ti:sapphire laser pulse, we used a Brewster-cut Pockel's cell for Q-switching. The laser was frequency doubled by a type I BBO crystal outside of the cavity.

  15. Comentarios sobre la Ley de Ordenamiento Territorial Sostenible

    Directory of Open Access Journals (Sweden)

    Arturo J. Yglesias

    2014-04-01

    Full Text Available La denominada Ley de Ordenamiento Territorial Sostenible, no fue bien recibida en el medio jurídico. Tanto los profesores de las diferentes materias de Derecho de nuestra Facultad como las asociaciones profesionales y otros grupos e juristas de nuestro medio, formularon reservas de diverso calibre sobre el texto de la ley que van desde sus aspectos adjetivos como la terminología y redacción hasta cuestiones sustanciales como lo que ella dice sobre el régimen de la propiedad territorial y otras cuestiones vinculadas.Desde el discurso político vimos lanzar opiniones iracundas y alarmistas sobre las modificaciones que la ley estaría haciendo al régimen de la propiedad privada, sobre su supuesta inconstitucionalidad.Nosotros nos vamos a referir a la ley a sus antecedentes y de las críticas que se le hacían, en la parte que toca a nuestra materia, esto es en lo relativo al régimen de la propiedad y debemos decir, a vía de adelanto, que no vemos en ella nada que afecte el derecho de propiedad consagrado por la Constitución de la República, ni los principios generales que regulan la propiedad territorial conforme al Código Civil, conforme a la vieja ley de Centros Poblados, sus modificativas ni demás normas sobre la materia.

  16. Pistas para pensar las significaciones imaginarias sobre la invariancia

    OpenAIRE

    Bilyk, Pablo Andrés

    2011-01-01

    Este escrito propone un primer esbozo de nominalizaciones sobre las significaciones imaginarias en torno a la idea de invariancia, con el fin de comenzar a mapear categorías para transitar que nos permitan pensar las construcciones fantasmáticas sobre el no-cambio. En definitiva, se trata de avanzar sobre la problematización de los modos de funcionamiento, constitución y reconfiguraciones de las hegemonías en los entramados sociales contemporáneos. Facultad de Periodismo y Comunicación Soc...

  17. Photonic bandgap fiber lasers and multicore fiber lasers for next generation high power lasers

    DEFF Research Database (Denmark)

    Shirakawa, A.; Chen, M.; Suzuki, Y.

    2014-01-01

    Photonic bandgap fiber lasers are realizing new laser spectra and nonlinearity mitigation that a conventional fiber laser cannot. Multicore fiber lasers are a promising tool for power scaling by coherent beam combination. © 2014 OSA....

  18. Tema 5. Circuitos de corriente continua y alterna (Curso 2009-2010)

    OpenAIRE

    Miret Marí, Juan José; Caballero Caballero, María Teresa; Espinosa Tomás, Julián; Pérez Rodríguez, Jorge

    2009-01-01

    1. Magnitudes y elementos de un circuito. Circuitos de corriente continua constante: componentes y análisis; 2. Circuitos de corriente alterna: componentes; 3. Circuitos de corriente alterna: análisis; 4. Oscilaciones eléctricas. Circuitos de corriente continua variable; 5. Electrónica: materiales semiconductores y diodos.

  19. Laser power sources and laser technology for accelerators

    International Nuclear Information System (INIS)

    Lowenthal, D.

    1986-01-01

    The requirements on laser power sources for advanced accelerator concepts are formidable. These requirements are driven by the need to deliver 5 TeV particles at luminosities of 10/sup 33/ - 10/sup 34/ cm/sup -2/ sec/sup -1/. Given that optical power can be transferred efficiently to the particles these accelerator parameters translate into single pulse laser output energies of several kilojoules and rep rates of 1-10 kHz. The average laser output power is then 10-20 MW. Larger average powers will be needed if efficient transfer proves not to be possible. A laser plant of this magnitude underscores the importance of high wall plug efficiency and reasonable cost in $/Watt. The interface between the laser output pulse format and the accelerator structure is another area that drives the laser requirements. Laser accelerators break up into two general architectures depending on the strength of the laser coupling. For strong coupling mechanisms, the architecture requires many ''small'' lasers powering the accelerator in a staged arrangement. For the weak coupling mechanisms, the architecture must feature a single large laser system whose power must be transported along the entire accelerator length. Both of these arrangements have demanding optical constraints in terms of phase matching sequential stages, beam combining arrays of laser outputs and optimizing coupling of laser power in a single accelerating stage

  20. Neocolagenização induzida pelo resurfacing com laser erbium:YAG isolado e associado a lifting cutâneo: estudo morfométrico comparativo em ratos Comparison of single erbium:YAG laser resurfacing to a combination with cutaneous lifting: a morphometric study of neocollagenization in rats

    Directory of Open Access Journals (Sweden)

    Lucia Noronha

    2005-10-01

    Full Text Available INTRODUÇÃO: Diferente do lifting, cuja tração mecânica é a responsável pelo efeito clínico de rejuvenescimento sobre rugas profundas, a fibroplasia (ou neocolagenização é a responsável direta pelo resultado final da ação do laser sobre a pele com rugas superficiais, conferindo-lhe aparência mais jovem. O uso combinado dessas duas técnicas pode ser vantajoso, pois permite um resultado estético melhor com um único procedimento anestésico e cirúrgico em um curto período de recuperação. OBJETIVOS: O presente estudo morfométrico se propõe a avaliar se ocorre alguma alteração na espessura da fibroplasia induzida pelo resurfacing a laser erbium:YAG quando este se associa ao lifting cutâneo. MÉTODO: Foram utilizados 50 ratos da linhagem Wistar, divididos em dois grupos de 25, sendo que o primeiro grupo foi submetido à aplicação exclusiva de laser erbium:YAG no dorso de cada animal e o outro sofreu a aplicação de laser Erbium: YAG combinada ao lifting, o qual foi representado, no animal de experimentação, por retalho cutâneo dorsal pediculado. A fibroplasia foi avaliada nos dois grupos com medidas morfométricas lineares realizadas após o sacrifício dos animais nos dias 14, 28, 56, 84 e 112 do pós-operatório. RESULTADO: Foi observado aumento da fibroplasia em ambos os grupos estudados, porém o crescimento do colágeno foi superior no grupo submetido à terapia isolada com laser Erbium: YAG. CONCLUSÃO: A espessura da fibroplasia induzida pelo resurfacing a laser Erbium: YAG foi influenciada pela associação de um segundo procedimento cirúrgico no mesmo tempo operatório, neste caso, o lifting cutâneo.INTRODUCTION: The fibroplasia is the responsible for the final aesthetic results induced by laser resurfacing upon skin with superficial wrinkles. On the other hand, the lifting is responsible for the deeper wrinkles removal, produced by mechanic results. The use of the combination of these two rejuvenation

  1. Laser pumped lasers for isotope separation

    International Nuclear Information System (INIS)

    Fry, S.M.

    1976-01-01

    A study of the isotope separation laser requirements reveals that high pressure polyatomic molecular gas laser pumped lasers can attain the necessary characteristics including tunability, energy output, pulse width, and repetition rate. The results of a search, made for molecules meeting the appropriate requirements for one of several pump schemes utilizing a CO 2 laser and with output in the 12 μm or 16μm wavelength range, are presented. Several methods of pumping are reviewed and two novel pump schemes are presented. A laser pumped laser device design is given, and operation of this device and associated diagnostic equipment is confirmed by repeating experiments in OCS and NH 3 . The results of OCS laser experiments show that an improvement in pump rate and output per unit length is obtained with the device, using a wedged transverse pumping scheme. A new multi-line laser system in NH 3 pumped by a TEA CO 2 laser is reported. More than forty transitions spanning the wavelength range of 9.2 to 13.8 μm are observed and identified. A strong output at 12.08 μm is one of the closest lines yet found to the required laser isotope separation wavelength. Far infrared emission near 65 μm is observed and is responsible for populating levels which lase in pure ammonia near 12.3 μm. Buffer gas (e.g., N 2 or He) pressures of approximately 40--800 torr cause energy transfer by collision-induced rotationaltransitions from the pumped antisymmetric to the lasing symmetric levels in the nu 2 = 1 band of ammonia. Most of the observed lines are aP(J,K) transitions which originate from the nu 2 /sup s/ band. Measurements of the pressure dependence of the laser output shows that some lines lase at pressures greater than one atmosphere. Transient behavior of the 12.08 μm line is calculated from a simplified analytic model and these calculations are compared to the experimental results

  2. Future prospects of laser diodes and fiber lasers

    International Nuclear Information System (INIS)

    Ueda, Ken-ichi

    2000-01-01

    For the next century we should develop new concepts for coherent control of light generation and propagation. Owing to the recent development of ultra fine structures in semiconductor lasers, fiber lasers, and various kinds of waveguide structure, we can make optical devices which control the light propagation artificially. But, the phase locking and phase control of multiple laser oscillators are one of the most important directions of laser science and technology. The coherent summation has been a dream of laser since 1960. Is it possible to solve this old and quite challenging problem for laser science? This is also a very basic concept because the laser action based on the stimulated emission is the process of coherent summation of huge number of photons emitted from individual atoms. In this paper, I discuss the fundamental direction of laser research in the next ten or twenty years. The active optics and laser technology should be combined intrinsically in near future. (author)

  3. Narrativas sobre género y sexualidad en médicos mexicanos. Sus implicaciones sobre las regulaciones corporales, sexuales y reproductivas

    Directory of Open Access Journals (Sweden)

    Itzel A. Sosa-Sánchez

    Full Text Available Resumen A partir de un estudio cualitativo, exploramos los vínculos entre discursos médicos sobre género y sexualidad, y las regulaciones corporales, sexuales y reproductivas en los espacios de salud reproductiva. Entrevistamos a médicos de servicios públicos de salud en México e indagamos sobre las prácticas reproductivas y sexuales de las usuarias, así como sobre las asignaciones sociales y profesionales de cuidado del cuerpo en las relaciones sexuales. Los testimonios revelan cómo los discursos y normatividades sobre género y sexualidad legitiman, en los espacios de salud reproductiva, las desigualdades sociales, especialmente las de género, y la doble moral sexual imperantes en la sociedad mexicana. Las mujeres emergen como saturadas de una sexualidad “desordenada” que debe ser controlada a través de diversas regulaciones corporales, sexuales y reproductivas. Estas regulaciones inciden en el reconocimiento de su autonomía sexual y reproductiva, e impactan negativamente en sus derechos.

  4. YCOB lasers

    International Nuclear Information System (INIS)

    Richardson, Martin; Hammons, Dennis; Eichenholz, Jason; Chai, Bruce; Ye, Qing; Jang, Won; Shah, Lawrence

    1999-01-01

    We review new developments with a new laser host material, YCa 4 O(BO 3 ) 3 or YCOB. Lasers based on this host material will open new opportunities for the development of compact, high-power, frequency-agile visible and near IR laser sources, as well as sources for ultrashort pulses. Efficient diode-pumped laser action with both Nd-doped and Yb-doped YCOB has already been demonstrated. Moreover, since these materials are biaxial, and have high nonlinear optical coefficients, they have become the first laser materials available as efficient self-frequency-doubled lasers, capable of providing tunable laser emission in several regions of the visible spectrum. Self-frequency doubling eliminates the need for inclusion of a nonlinear optical element within or external to the laser resonator. These laser materials possess excellent thermal and optical properties, have high laser-damage thresholds, and can be grown to large sizes. In addition they are non-hygroscopic. They therefore possess all the characteristics necessary for laser materials required in rugged, compact systems. Here we summarize the rapid progress made in the development of this new class of lasers, and review their potential for a number of applications. (author)

  5. Parameters in fractional laser assisted delivery of topical anesthetics: Role of laser type and laser settings.

    Science.gov (United States)

    Meesters, Arne A; Nieboer, Marilin J; Kezic, Sanja; de Rie, Menno A; Wolkerstorfer, Albert

    2018-05-07

    Efficacy of topical anesthetics can be enhanced by pretreatment of the skin with ablative fractional lasers. However, little is known about the role of parameters such as laser modality and laser density settings in this technique. Aims of this study were to compare the efficacy of pretreatment with two different ablative fractional laser modalities, a CO 2 laser and an Er:YAG laser, and to assess the role of laser density in ablative fractional laser assisted topical anesthesia. In each of 15 healthy subjects, four 10 × 10 mm test regions on the back were randomized to pretreatment (70-75 μm ablation depth) with CO 2 laser at 5% density, CO 2 laser at 15% density, Er:YAG laser at 5% density or Er:YAG laser at 15% density. Articaine hydrochloride 40 mg/ml + epinephrine 10 μg/ml solution was applied under occlusion to all four test regions. After 15 minutes, a pass with the CO 2 laser (1,500 μm ablation depth) was administered as pain stimulus to each test region. A reference pain stimulus was given on unanesthetized skin. The main outcome parameter, pain, was scored on a 0-10 visual analogue scale (VAS) after each pain stimulus. Median VAS scores were 1.50 [CO 2 5%], 0.50 [CO 2 15%], 1.50 [Er:YAG 5%], 0.43 [Er:YAG 15%], and 4.50 [unanesthetized reference]. VAS scores for all pretreated test regions were significantly lower compared to the untreated reference region (P laser pretreated regions. However, VAS scores were significantly lower at 15% density compared to 5% density for both for the CO 2 laser (P laser (P laser was considered slightly more painful than pretreatment with Er:YAG laser by the subjects. Fractional laser assisted topical anesthesia is effective even with very low energy settings and an occlusion time of only 15 minutes. Both the CO 2 laser and the Er:YAG laser can be used to assist topical anesthesia although the CO 2 laser pretreatment is experienced as more painful. In our study settings, using articaine

  6. Laser beam cutting method. Laser ko ni yoru kaitai koho

    Energy Technology Data Exchange (ETDEWEB)

    Kutsumizu, A. (Obayashi Corp., Osaka (Japan))

    1991-07-01

    In this special issue paper concerning the demolition of concrete structures, was introduced a demolition of concrete structures using laser, of which practical application is expected due to the remarkable progress of generating power and efficiency of laser radiator. The characteristics of laser beam which can give a temperature of one million centigrade at the irradiated spot, the laser radiator consisting of laser medium, laser resonator and pumping apparatus, and the laser kinds for working, such as CO{sub 2} laser, YAG laser and CO laser, were described. The basic constitution of laser cutting equipment consisting of large generating power radiator, beam transmitter, beam condenser, and nozzle for working was also illustrated. Furthermore, strong and weak points in the laser cutting for concrete and reinforcement were enumerated. Applications of laser to cutting of reinforced and unreinforced concrete constructions were shown, and the concept and safety measure for application of laser to practical demolition was discussed. 5 refs., 8 figs.

  7. Ultrashort pulse laser technology laser sources and applications

    CERN Document Server

    Schrempel, Frank; Dausinger, Friedrich

    2016-01-01

    Ultrashort laser pulses with durations in the femtosecond range up to a few picoseconds provide a unique method for precise materials processing or medical applications. Paired with the recent developments in ultrashort pulse lasers, this technology is finding its way into various application fields. The book gives a comprehensive overview of the principles and applications of ultrashort pulse lasers, especially applied to medicine and production technology. Recent advances in laser technology are discussed in detail. This covers the development of reliable and cheap low power laser sources as well as high average power ultrashort pulse lasers for large scale manufacturing. The fundamentals of laser-matter-interaction as well as processing strategies and the required system technology are discussed for these laser sources with respect to precise materials processing. Finally, different applications within medicine, measurement technology or materials processing are highlighted.

  8. Revisitando uma carta em português sobre Sabbatai Zvi

    Directory of Open Access Journals (Sweden)

    Rodrigues da Silva Tavim, José Alberto

    2007-06-01

    Full Text Available The present paper deals with the Iberian context of the production-translation of a text in Portuguese language about Shabbatai Zevi, in 1666. We refer the production of similar texts and the information about the adherents in Spain, mostly in Malaga. We reflect on the various messsianic currents that crossed the different social groups in Portugal. We present a text that proves the spreading of news about Shabbatai in Portuguese Lands, and the interest kindled among the Portuguese Conversos. And we place the hypothesis that this text to the movement of Shabbatai, could have different readings, among them one that could be convenient to the conversos.

    Este artículo aborda el contexto de la producción-traducción de un texto en portugués sobre Sabetay Sebí, en 1666. Se alude a la producción de otros textos similares y a la información sobre los adeptos del movimiento en España, sobre todo en Málaga. Se reflexiona sobre las varias corrrientes mesiánicas que cruzaban los diferentes grupos sociales en Portugal. Se presenta un texto que prueba la divulgación de noticias sobre Sabetay, en tierras portuguesas y del interés desperttado entre los medios conversos sobre el movimiento. Y se plantea la hipótesis de que este texto contrario al movimiento de Sabbatai pudiera tener varias lecturas, entre ellas una que debería ser conveniente para los conversos.

  9. Study of the solidification of M2 high speed steel Laser Cladding coatings

    Directory of Open Access Journals (Sweden)

    Candel, J. J.

    2013-10-01

    Full Text Available High speed steel laser cladding coatings are complex because cracks appear and the hardness is lower than expected. In this paper AISI M2 tool steel coatings on medium carbon AISI 1045 steel substrate have been manufactured and after Laser Cladding (LC processing it has been applied a tempering heat treatment to reduce the amount of retained austenite and to precipitate secondary carbides. The study of metallurgical transformations by Scanning Electron Microscopy (SEM and Electron Back Scattered Diffraction (EBSD shows that the microstructure is extremely fine and complex, with eutectic transformations and MC, M2C and M6C precipitation. Therefore, after the laser coating is necessary to use post-weld heat treatments.Los recubrimientos de acero rápido por Laser Cladding (LC son complejos porque aparecen fisuras y la dureza es menor a la esperada. En este trabajo se han fabricado recubrimientos de acero AISI M2 sobre acero al carbono AISI 1045 y tras el procesado por láser, se han revenido para reducir la cantidad de austenita retenida y precipitar carburos secundarios. El estudio de las transformaciones metalúrgicas con Microscopía Electrónica de Barrido (MEB y Difracción de Electrones Retrodispersados (EBSD muestra que la microestructura es extremadamente fina y compleja, presenta transformaciones eutécticas y precipitación de carburos MC, M2C y M6C. Por tanto, tras el recubrimiento por láser es necesario recurrir a tratamientos térmicos post-soldeo.

  10. Laser beam diagnostics for kilowatt power pulsed YAG laser

    International Nuclear Information System (INIS)

    Liu, Yi; Leong, Keng H.

    1992-01-01

    There is a growing need for high power YAG laser beam diagnostics with the recent introduction of such lasers in laser material processing. In this paper, we will describe the use of a commercially available laser beam analyzer (Prometec) to profile the laser beam from a 1600 W pulsed Nd:YAG laser that has a 1 mm fiber optic beam delivery system. The selection of laser pulse frequency and pulse width for the measurement is discussed. Laser beam propagation parameters by various optical components such as fibers and lenses can be determined from measurements using this device. The importance of such measurements will be discussed

  11. REPRESENTAÇÃO SOCIAL DOS ENFERMEIROS SOBRE CUIDADOS PALIATIVOS

    OpenAIRE

    Coelho de Britto, Sabrina Maria; de Souza Ramos, Raquel; dos Santos, Érick Igor; da Silva Veloso, Olga; Melo da Silva, Aline; de Aguiar Mariz, Rosângela Guiomar

    2015-01-01

    Introdução: O presente estudo refere-se a um processo de investigação sobre a representação social dos enfermeiros sobre cuidados paliativos. Objetivos: identificar a estrutura das representações sociais dos enfermeiros sobre cuidados paliativos; discutir as repercussões dessas representações no cotidiano da prática assistencial. Materiais e Métodos: Para a realização deste estudo foram abordados 70 enfermeiros que atuam nas enfermarias do serviço de Clínica Médica. A técnica para coleta de d...

  12. Laser materials processing with diode lasers

    OpenAIRE

    Li, Lin; Lawrence, Jonathan; Spencer, Julian T.

    1996-01-01

    Laser materials processing is currently dominated by CO2, Nd-YAG and Excimer lasers. Continuous advances in semiconductor laser technology over the last decade have increased the average power output of the devices annualy by two fold, resulting in the commercial availability of the diode lasers today with delivery output powers in excess of 60W in CW mode and 5kW in qasi-CW mode. The advantages of compactness, high reliability, high efficiency and potential low cost, due to the mass producti...

  13. Transurethral vaporesection of prostate: diode laser or thulium laser?

    Science.gov (United States)

    Tan, Xinji; Zhang, Xiaobo; Li, Dongjie; Chen, Xiong; Dai, Yuanqing; Gu, Jie; Chen, Mingquan; Hu, Sheng; Bai, Yao; Ning, Yu

    2018-05-01

    This study compared the safety and effectiveness of the diode laser and thulium laser during prostate transurethral vaporesection for treating benign prostate hyperplasia (BPH). We retrospectively analyzed 205 patients with BPH who underwent a diode laser or thulium laser technique for prostate transurethral vaporesection from June 2016 to June 2017 and who were followed up for 3 months. Baseline characteristics of the patients, perioperative data, postoperative outcomes, and complications were compared. We also assessed the International Prostate Symptom Score (IPSS), quality of life (QoL), maximum flow rate (Q max ), average flow rate (AFR), and postvoid residual volume (PVR) at 1 and 3 months postoperatively to evaluate the functional improvement of each group. There were no significant differences between the diode laser and thulium laser groups related to age, prostate volume, operative time, postoperative hospital stays, hospitalization costs, or perioperative data. The catheterization time was 3.5 ± 0.8 days for the diode laser group and 4.7 ± 1.8 days for the thulium laser group (p diode laser and thulium laser contributes to safe, effective transurethral vaporesection in patients with symptomatic BPH. Diode laser, however, is better than thulium laser for prostate transurethral vaporesection because of its shorter catheterization time. The choice of surgical approach is more important than the choice of laser types during clinical decision making for transurethral laser prostatectomy.

  14. Sobre-educación en el mercado laboral colombiano

    Directory of Open Access Journals (Sweden)

    Jhon James Mora

    2008-12-01

    Full Text Available Este artículo analiza la sobre-educación en Colombia con datos de individuos y empresas compilados por el Servicio Nacional de Aprendizaje de Colombia en 2006, encuentra que la probabilidad de estar sobre-educado es del 14% y que depende de la movilidad entre áreas de desempeño, la experiencia, el género, el tamaño de la empresa y el nivel de educación. Los trabajadores sobre-educados ganan un 2% menos que los trabajadores correctamente educados, conforme al patrón internacional. Los resultados también muestran que la probabilidad de que los profesionales permanezcan en la misma área de desempeño aumenta con la experiencia, que cuanto mayor es la sobre-educación menor es la probabilidad de permanecer en dicha área y que los trabajadores con postgrado tienen menor probabilidad de permanecer en su área de desempeño.

  15. Consideraciones del bioderecho sobre la eutanasia en Colombia

    Directory of Open Access Journals (Sweden)

    José Antonio García Pereáñez

    2017-01-01

    Full Text Available Este artículo aborda de manera reflexiva las incidencias del bioderecho sobre situaciones de eutanasia en Colombia, al interpretar conflictos morales y jurídicos suscitados por las sentencias de la Corte Constitucional C239 de 1997, T970 de 2014 y la Resolución del Ministerio de Salud y Protección Social 1216, de 2015. El propósito fundamental es el análisis de las decisiones judiciales sobre el final de la vida humana. Por lo tanto, se realiza una revisión de la construcción histórica y jurídica del concepto de eutanasia y se propone la discusión sobre su manejo jurídico y su influencia en el colectivo moral. Asimismo, se diserta sobre el concepto de dignidad humana y muerte digna, como precedentes para dirimir los conflictos éticos que la eutanasia suscita. Al final, se analiza el caso de don Ovidio González, quien se convirtió en 2015 en el primer colombiano en recibir la eutanasia de manera legal dentro del sistema de salud.

  16. Reverse spontaneous laser line sweeping in ytterbium fiber laser

    Czech Academy of Sciences Publication Activity Database

    Navrátil, Petr; Peterka, Pavel; Honzátko, Pavel; Kubeček, V.

    2017-01-01

    Roč. 14, č. 3 (2017), č. článku 035102. ISSN 1612-2011 R&D Projects: GA ČR(CZ) GA16-13306S Institutional support: RVO:67985882 ; RVO:68378271 Keywords : laser line sweeping * ytterbium * fiber lasers Subject RIV: BH - Optics, Masers, Lasers; BH - Optics, Masers, Lasers (FZU-D) OBOR OECD: Optics (including laser optics and quantum optics); Optics (including laser optics and quantum optics) (FZU-D) Impact factor: 2.537, year: 2016

  17. EVALUACION DE METODOLOGÍAS PARA EL ANALISIS DE PRODUCTOS TÓXICOS DE LA DEGRADACIÓN DE FUNGICIDAS DITIOCARBAMATOS

    Directory of Open Access Journals (Sweden)

    Jairo Arturo Guerrero

    2013-11-01

    Full Text Available Se evaluaron cuatro metodologías para la determinación de etilentiourea y propilentiourea en frutas y hortalizas; se seleccionó y optimizó un método de extracción utilizando una mezcla metanol:agua 3:1 y posterior limpieza con partición liquido-líquido soportada sobre extrelut. La determinación y cuantificación se llevó a cabo utilizando cromatografía liquida de alta eficiencia con detección de arreglo de diodos. La metodología validada es específica y selectiva, con porcentajes de recuperación entre 77,82% y 83,57%, coeficientes de variación menores al 20% y límites de detección entre 0,003 y 0,006 mg.kg-1. Los parámetros estadísticos de linealidad mostraron resultados adecuados en los rangos de concentración evaluados. La metodología es robusta para las variables evaluadas y no se observó efecto matriz. Se encontraron trazas de etilentiourea y propilentiourea en una muestra de tomate y una muestra de papa, respectivamente.

  18. High-energy molecular lasers self-controlled volume-discharge lasers and applications

    CERN Document Server

    Apollonov, V V

    2016-01-01

    This book displays the physics and design of high-power molecular lasers. The lasers described are self-controlled volume-discharge lasers. The book explains self-sustained discharge lasers, self-initiated discharge lasers and technical approaches to laser design. Important topics discussed are laser efficiency, laser beam quality and electric field homogeneity. The book contains many new innovative applications.

  19. Laser safety considerations for a mobile laser program

    Science.gov (United States)

    Flor, Mary

    1997-05-01

    An increased demand for advanced laser technology, especially in the area of cutaneous and cosmetic procedures has prompted physicians to use mobile laser services. Utilization of a mobile laser service allows physicians to provide the latest treatments for their patients while minimizing overhead costs. The high capital expense of laser systems is often beyond the financial means of individual clinicians, group practices, free-standing clinics and smaller community hospitals. Historically rapid technology turnover with laser technology places additional risk which is unacceptable to many institutions. In addition, health care reform is mandating consolidation of equipment within health care groups to keep costs at a minimum. In 1994, Abbott Northwestern Hospital organized an in-house mobile laser technology service which employs a group of experienced laser specialists to deliver and support laser treatments for hospital outreach and other regional physicians and health care facilities. Many of the hospital's internal safety standards and policies are applicable to the mobile environment. A significant challenge is client compliance because of the delicate balance of managing risk while avoiding being viewed as a regulator. The clinics and hospitals are assessed prior to service to assure minimum laser safety standards for both the patient and the staff. A major component in assessing new sites is to inform them of applicable regulatory standards and their obligations to assure optimum laser safety. In service training is provided and hospital and procedures are freely shared to assist the client in establishing a safe laser environment. Physician and nursing preceptor programs are also made available.

  20. Dermatological laser treatment

    International Nuclear Information System (INIS)

    Moerk, N.J.; Austad, J.; Helland, S.; Thune, P.; Volden, G.; Falk, E.

    1991-01-01

    The article reviews the different lasers used in dermatology. Special emphasis is placed on the treatment of naevus flammeus (''portwine stain'') where lasers are the treatment of choice. Argon laser and pulsed dye laser are the main lasers used in vascular skin diseases, and the article focuses on these two types. Copper-vapour laser, neodymium-YAG laser and CO 2 laser are also presented. Information is provided about the availability of laser technology in the different health regions in Norway. 5 refs., 2 figs

  1. Laser Ablation of Biological Tissue Using Pulsed CO2 Laser

    International Nuclear Information System (INIS)

    Hashishin, Yuichi; Sano, Shu; Nakayama, Takeyoshi

    2010-01-01

    Laser scalpels are currently used as a form of laser treatment. However, their ablation mechanism has not been clarified because laser excision of biological tissue occurs over a short time scale. Biological tissue ablation generates sound (laser-induced sound). This study seeks to clarify the ablation mechanism. The state of the gelatin ablation was determined using a high-speed video camera and the power reduction of a He-Ne laser beam. The aim of this study was to clarify the laser ablation mechanism by observing laser excision using the high-speed video camera and monitoring the power reduction of the He-Ne laser beam. We simulated laser excision of a biological tissue by irradiating gelatin (10 wt%) with radiation from a pulsed CO 2 laser (wavelength: 10.6 μm; pulse width: 80 ns). In addition, a microphone was used to measure the laser-induced sound. The first pulse caused ablation particles to be emitted in all directions; these particles were subsequently damped so that they formed a mushroom cloud. Furthermore, water was initially evaporated by laser irradiation and then tissue was ejected.

  2. Laser applications in nanotechnology: nanofabrication using laser ablation and laser nanolithography

    International Nuclear Information System (INIS)

    Makarov, G N

    2013-01-01

    The fact that nanoparticles and nanomaterials have fundamental properties different both from their constituent atoms or molecules and from their bulk counterparts has stimulated great interest, both theoretical and practical, in nanoparticles and nanoparticle-based assemblies (functional materials), with the result that these structures have become the subject of explosive research over the last twenty years or so. A great deal of progress in this field has relied on the use of lasers. In this paper, the directions followed and results obtained in laser nanotechnology research are reviewed. The parameters, properties, and applications of nanoparticles are discussed, along with the physical and chemical methods for their fabrication and investigation. Nanofabrication applications of and fundamental physical principles behind laser ablation and laser nanolithography are discussed in detail. The applications of laser radiation are shown to range from fabricating, melting, and evaporating nanoparticles to changing their shape, structure, size, and size distribution, through studying their dynamics and forming them into periodic arrays and various structures and assemblies. The historical development of research on nanoparticles and nanomaterials and the application of laser nanotechnology in various fields are briefly reviewed. (reviews of topical problems)

  3. Laser spectroscopy and laser isotope separation of atomic gadolinium

    International Nuclear Information System (INIS)

    Chen, Y. W.; Yamanaka, C.; Nomaru, K.; Kou, K.; Niki, H.; Izawa, Y.; Nakai, S.

    1994-01-01

    Atomic vapor laser isotope separation (AVLIS) is a process which uses intense pulsed lasers to selectively photoionize one isotopic species of a chemical element, after which these ions are extracted electromagnetically. The AVLIS has several advantages over the traditional methods based on the mass difference, such as high selectivity, low energy consumption, short starting time and versatility to any atoms. The efforts for atomic vapor laser isotope separation at ILT and ILE, Osaka University have been concentrated into the following items: 1) studies on laser spectroscopy and laser isotope separation of atomic gadolinium, 2) studies on interaction processes including coherent dynamics, propagation effects and atom-ion collision in AVLIS system, 3) development of laser systems for AVLIS. In this paper, we present experimental results on the laser spectroscopy and laser isotope separation of atomic gadolinium.

  4. The Newest Laser Processing

    International Nuclear Information System (INIS)

    Lee, Baek Yeon

    2007-01-01

    This book mentions laser processing with laser principle, laser history, laser beam property, laser kinds, foundation of laser processing such as laser oscillation, characteristic of laser processing, laser for processing and its characteristic, processing of laser hole including conception of processing of laser hole and each material, and hole processing of metal material, cut of laser, reality of cut, laser welding, laser surface hardening, application case of special processing and safety measurement of laser.

  5. Electrodeless excimer laser; Laser a eccimeri senza elettrodi

    Energy Technology Data Exchange (ETDEWEB)

    Lisi, N. [ENEA, Divisione Nuovi Materiali, Centro Ricerche Casaccia, Rome (Italy)

    2001-07-01

    In this paper it is proposed how to build an excimer laser based on an electrodeless discharge (or Dielectric Barrier Discharge). Such laser could operate with a low energy per pulse (<100 mJ) and a high repetition rate (<100 kHz). The most relevant advantage an electrodeless DBD laser is the much longer gas mixture lifetime. This feature could allow the operation of a sealed laser emitting higher average power with respect to commercially available excimer lasers. Such discharge scheme could be advantageous in order to excite the F{sub 2} excimer molecule, whose emission wavelength in the VUV range (157 nm) at high reprate is particularly interesting in the micro-lithography field. [Italian] In questo documento viene proposto come costruire un laser a eccimeri basato su una scarica priva di elettrodi, o Dielectric Barrier Discharge. Tale laser puo' funzionare con una bassa energia per impulso (<100 mJ) ad alta frequenza di ripetizione (<100 kHz). Il vantaggio fondamentale di un laser a DBD e quindi privo di elettrodi e' la vita media della miscela gassosa molto piu' alta che potrebbe permettere alla camera laser di operare sigillata ad una potenza media superiore a quella dei laser a eccimeri attuali. Tale schema di pompaggio potrebbe essere particolarmente vantaggioso per eccitare la molecola eccimero F{sub 2} la cui lunghezza di emissione nel VUV (157 nm) ad elevata frequenza di ripetizione presenta un notevole interesse nel campo della produzione di microcircuiti.

  6. Laser technologies for laser accelerators. Annual report

    International Nuclear Information System (INIS)

    1985-01-01

    The primary result of the work reported is the determination of laser system architectures that satsify the requirements of high luminosity, high energy (about 1 TeV), electron accelerators. It has been found that high laser efficiency is a very hard driver for these accelerators as the total average laser output optical power is likely to fall above 10 MW. The luminosity requires rep rates in the kHz range, and individual pulse lengths in the 1-10 psec range are required to satisfy acceleration gradient goals. CO 2 and KrF lasers were chosen for study because of their potential to simultaneously satisfy the given requirements. Accelerator luminosity is reviewed, and requirements on laser system average power and rep rate are determined as a function of electron beam bunch parameters. Laser technologies are reviewed, including CO 2 , excimers, solid state, and free electron lasers. The proposed accelerator mechanisms are summarized briefly. Work on optical transport geometries for near and far field accelerators are presented. Possible exploitation of the CO 2 and DrF laser technology to generate the required pulse lengths, rep rates, and projected efficiencies is illustrated and needed development work is suggested. Initial efforts at developing a 50 GeV benchmark conceptual design and a 100 MeV demonstration experiment conceptual design are presented

  7. Impuesto sobre las transacciones financieras: Justicia fiscal

    OpenAIRE

    Mariño, José Ramón

    2016-01-01

    7 p.[Variante del título de la publicación : Boletín electrónico de Hegoa] [ESP] El Impuesto sobre las transacciones financieras se basa en establecer un gravamen sobre las operaciones financieras con el fin de estabilizar los mercados como consecuencia de la disminución de la especulación a corto plazo. Además es una fuente de financiación de inversiones socialmente deseables. Diez países de la Unión Europea han expresado su deseo de introducir el ITF, sin emba...

  8. Laser ion sources

    Energy Technology Data Exchange (ETDEWEB)

    Bykovskij, Yu

    1979-02-01

    The characteristics a laser source of multiply-ionized ions are described with regard to the interaction of laser radiation and matter, ion energy spectrum, angular ion distribution. The amount of multiple-ionization ions is evaluated. Out of laser source applications a laser injector of multiple-ionization ions and nuclei, laser mass spectrometry, laser X-ray microradiography, and a laser neutron generators are described.

  9. Laser Physics and Physics with Lasers - Recent Advances

    International Nuclear Information System (INIS)

    Marowsky, G.

    2008-01-01

    This contribution reviews the development as well as recent technological advances in the field of optics with lasers and laser-related applications. Topics ranging from 'attoscience' to 'zero-modes' shall be dealt with in this presentation. Further reading in the following references is suggested: Springer Handbook of Lasers and Optics (F. Trager, ed.), 2007, ISBN-13: 978-0-387-95579-7; Chapter 11.7, Part C: Ultraviolet Lasers: Excimers, Fluorine (F2), Nitrogen (N2), pp. 764-776; Excimer Laser Technology (D. Basting, G. Marowsky, eds.) 2005, Springer, ISBN-13 978-3-540-20056-7

  10. LASER PROCESSING ON SINGLE CRYSTALS BY UV PULSE LASER

    OpenAIRE

    龍見, 雅美; 佐々木, 徹; 高山, 恭宜

    2009-01-01

    Laser processing by using UV pulsed laser was carried out on single crystal such as sapphire and diamond in order to understand the fundamental laser processing on single crystal. The absorption edges of diamond and sapphire are longer and shorter than the wave length of UV laser, respectively. The processed regions by laser with near threshold power of processing show quite different state in each crystal.

  11. Notas sobre Matisia longiflora Gleas. (Bombacaceae Notas sobre Matisia longiflora Gleas. (Bombacaceae

    Directory of Open Access Journals (Sweden)

    Fernández Alonso José Luis

    1992-09-01

    Full Text Available Dentro del grupo de géneros de bombacáceas de hojas simples que componen la tribu Quararibeae (= Matisieae Hutchinson, es Matisia Humb. & Bonpl. el que cuenta con mayor número de especies en Colombia. Al respecto se presentaron recientemente algunas consideraciones preliminares sobre la diversidad de especies en este grupo en Colombia (Fernández Alonso, 1991.

  12. Design windows of laser fusion power plants and conceptual design of laser-diode pumped slab laser

    International Nuclear Information System (INIS)

    Kozaki, Y.; Eguchi, T.; Izawa, Y.

    1999-01-01

    An analysis of the design space available to laser fusion power plants has been carried out, in terms of design key parameters such as target gain, laser energy and laser repetition rate, the number of fusion react ion chambers, and plant size. The design windows of economically attractive laser fusion plants is identified with the constraints of key design parameters and the cost conditions. Especially, for achieving high repetition rate lasers, we have proposed and designed a diode-pumped solid-state laser driver which consists of water-cooled zig-zag path slab amplifiers. (author)

  13. Lasers

    CERN Document Server

    Milonni, Peter W

    1988-01-01

    A comprehensive introduction to the operating principles and applications of lasers. Explains basic principles, including the necessary elements of classical and quantum physics. Provides concise discussions of various laser types including gas, solid state, semiconductor, and free electron lasers, as well as of laser resonators, diffraction, optical coherence, and many applications including holography, phase conjugation, wave mixing, and nonlinear optics. Incorporates many intuitive explanations and practical examples. Discussions are self-contained in a consistent notation and in a style that should appeal to physicists, chemists, optical scientists and engineers.

  14. Development of laser materials processing and laser metrology techniques

    International Nuclear Information System (INIS)

    Kim, Cheol Jung; Chung, Chin Man; Kim, Jeong Mook; Kim, Min Suk; Kim, Kwang Suk; Baik, Sung Hoon; Kim, Seong Ouk; Park, Seung Kyu

    1997-09-01

    The applications of remote laser materials processing and metrology have been investigated in nuclear industry from the beginning of laser invention because they can reduce the risks of workers in the hostile environment by remote operation. The objective of this project is the development of laser material processing and metrology techniques for repairing and inspection to improve the safety of nuclear power plants. As to repairing, we developed our own laser sleeve welding head and innovative optical laser weld monitoring techniques to control the sleeve welding process. Furthermore, we designed and fabricated a 800 W Nd:YAG and a 150 W Excimer laser systems for high power laser materials processing in nuclear industry such as cladding and decontamination. As to inspection, we developed an ESPI and a laser triangulation 3-D profile measurement system for defect detection which can complement ECT and UT inspections. We also developed a scanning laser vibrometer for remote vibration measurement of large structures and tested its performance. (author). 58 refs., 16 tabs., 137 figs

  15. Development of short pulse laser pumped x-ray lasers

    International Nuclear Information System (INIS)

    Dunn, J; Osterheld, A L; Hunter, J R; Shlyaptsev, V N

    2000-01-01

    X-ray lasers have been extensively studied around the world since the first laboratory demonstration on the Novette laser at LLNL in 1984 [l]. The characteristic properties of short wavelength, high monochromaticity, collimation and coherence make x-ray lasers useful for various applications. These include demonstrations of biological imaging within the water window, interferometry of laser plasmas and radiography of laser-heated surfaces. One of the critical issues has been the high power pump required to produce the inversion. The power scaling as a function of x-ray laser wavelength follows a -k4 to law. The shortest x-ray laser wavelength of ∼ 35 (angstrom) demonstrated for Ni-like All was at the limit of Nova laser capabilities. By requiring large, high power lasers such as Nova, the shot rate and total number of shots available have limited the rapid development of x-ray lasers and applications. In fact over the last fifteen years the main thrust has been to develop more efficient, higher repetition rate x-ray lasers that can be readily scaled to shorter wavelengths. The recent state of progress in the field can be found in references. The objective of the project was to develop a soft x-ray laser (XRL) pumped by a short pulse laser of a few joules. In effect to demonstrate a robust, worlung tabletop x-ray laser at LLNL for the first time. The transient collisional scheme as proposed by Shlyaptsev et al [8, 9] was the candidate x-ray laser for study. The successful endeavour of any scientific investigation is often based upon prudent early decisions and the choice of this scheme was both sound and fruitful. It had been demonstrated very recently for Ne-like Ti at 326 A using a small tabletop laser [10] but had not yet reached its full potential. We chose this scheme for several reasons: (a) it was a collisional-type x-ray laser which has been historically the most robust; (b) it had the promise of high efficiency and low energy threshold for lasing; (c) the

  16. Laser-supported detonation waves and pulsed laser propulsion

    International Nuclear Information System (INIS)

    Kare, J.

    1990-01-01

    A laser thermal rocket uses the energy of a large remote laser, possibly ground-based, to heat an inert propellant and generate thrust. Use of a pulsed laser allows the design of extremely simple thrusters with very high performance compared to chemical rockets. The temperatures, pressures, and fluxes involved in such thrusters (10 4 K, 10 2 atmospheres, 10 7 w/cm 2 ) typically result in the creation of laser-supported detonation (LSD) waves. The thrust cycle thus involves a complex set of transient shock phenomena, including laser-surface interactions in the ignition of the LSD wave, laser-plasma interactions in the LSD wave itself, and high-temperature nonequilibrium chemistry behind the LSD wave. The SDIO Laser Propulsion Program is investigating these phenomena as part of an overall effort to develop the technology for a low-cost Earth-to-orbit laser launch system. We will summarize the Program's approach to developing a high performance thruster, the double-pulse planar thruster, and present an overview of some results obtained to date, along with a discussion of the many research question still outstanding in this area

  17. ND:GLASS LASER DESIGN FOR LASER ICF FISSION ENERGY (LIFE)

    International Nuclear Information System (INIS)

    Caird, J.A.; Agrawal, V.; Bayramian, A.; Beach, R.; Britten, J.; Chen, D.; Cross, R.; Ebbers, C.; Erlandson, A.; Feit, M.; Freitas, B.; Ghosh, C.; Haefner, C.; Homoelle, D.; Ladran, T.; Latkowski, J.; Molander, W.; Murray, J.; Rubenchik, S.; Schaffers, K.; Siders, C.W.; Stappaerts, E.; Sutton, S.; Telford, S.; Trenholme, J.; Barty, C.J.

    2008-01-01

    We have developed preliminary conceptual laser system designs for the Laser ICF (Inertial Confinement Fusion) Fission Energy (LIFE) application. Our approach leverages experience in high-energy Nd:glass laser technology developed for the National Ignition Facility (NIF), along with high-energy-class diode-pumped solid-state laser (HEC-DPSSL) technology developed for the DOE's High Average Power Laser (HAPL) Program and embodied in LLNL's Mercury laser system. We present laser system designs suitable for both indirect-drive, hot spot ignition and indirect-drive, fast ignition targets. Main amplifiers for both systems use laser-diode-pumped Nd:glass slabs oriented at Brewster's angle, as in NIF, but the slabs are much thinner to allow for cooling by high-velocity helium gas as in the Mercury laser system. We also describe a plan to mass-produce pump-diode lasers to bring diode costs down to the order of $0.01 per Watt of peak output power, as needed to make the LIFE application economically attractive

  18. Laser fusion

    International Nuclear Information System (INIS)

    Eliezer, S.

    1982-02-01

    In this paper, the physics of laser fusion is described on an elementary level. The irradiated matter consists of a dense inner core surrounded by a less dense plasma corona. The laser radiation is mainly absorbed in the outer periphery of the plasma. The absorbed energy is transported inward to the ablation surface where plasma flow is created. Due to this plasma flow, a sequence of inward going shock waves and heat waves are created, resulting in the compression and heating of the core to high density and temperature. The interaction physics between laser and matter leading to thermonuclear burn is summarized by the following sequence of events: Laser absorption → Energy transport → Compression → Nuclear Fusion. This scenario is shown in particular for a Nd:laser with a wavelength of 1 μm. The wavelength scaling of the physical processes is also discussed. In addition to the laser-plasma physics, the Nd high power pulsed laser is described. We give a very brief description of the oscillator, the amplifiers, the spatial filters, the isolators and the diagnostics involved. Last, but not least, the concept of reactors for laser fusion and the necessary laser system are discussed. (author)

  19. New power lasers

    International Nuclear Information System (INIS)

    Yamanaka, Masanobu; Daido, Hiroyuki; Imasaki, Kazuo.

    1989-01-01

    As the new power lasers which are expected to exert large extending effect to the fields of advanced science and technology including precision engineering as well as laser nuclear fusion, LD-excited solid laser, X-ray laser and free electron laser are taken up and outlined. Recently, the solid laser using high power output, high efficiency semiconductor laser as the exciting beam source has been developed. This is called laser diode (LD)-excited solid laser, and the heightening of power output and efficiency and the extension of life are planned. Its present status and application to medical use, laser machining, laser soldering and so on are described. In 1960, the laser in visible region appeared, however in 1985, the result of observing induced emission beam by electron collision exciting method was reported in USA. In the wavelength range of 200 A, holography and contact X-ray microscope applications were verified. The various types of soft X-ray laser and the perspective hereafter are shown. The principle of free electron laser is explained. In the free electron laser, wavelength can be changed by varying electron beam energy, the period of wiggler magnetic field and the intensity of magnetic field. Further, high efficiency and large power output are possible. Its present status, application and the perspective hereafter are reported. (K.I.)

  20. An application of the theory of laser to nitrogen laser pumped dye laser

    International Nuclear Information System (INIS)

    Osman, Fatima Ahmed

    1998-03-01

    In this thesis we gave a general discussion on lasers, reviewing some of their properties, types and application. We also conducted an experiment where we obtained a dye laser pumped by nitrogen laser with a wave length of 337.1 nm and a power of 5 Mw.It was noticed that the produced radiation possesses characteristics different from those of other types of laser. This characteristics determine the tunability i.e the possibility of choosing the appropriately required wave-length of radiation for various applications.(Author)

  1. Laser propulsion for orbit transfer - Laser technology issues

    Science.gov (United States)

    Horvath, J. C.; Frisbee, R. H.

    1985-01-01

    Using reasonable near-term mission traffic models (1991-2000 being the assumed operational time of the system) and the most current unclassified laser and laser thruster information available, it was found that space-based laser propulsion orbit transfer vehicles (OTVs) can outperform the aerobraked chemical OTV over a 10-year life-cycle. The conservative traffic models used resulted in an optimum laser power of about 1 MW per laser. This is significantly lower than the power levels considered in other studies. Trip time was taken into account only to the extent that the system was sized to accomplish the mission schedule.

  2. Efficiencies of laser dyes for atomic vapor laser isotope separation

    International Nuclear Information System (INIS)

    Maeda, Mitsuo; Oki, Yuji; Uchiumi, Michihiro; Takao, Takayuki; Igarashi, Kaoru; Shimamoto, Kojiro.

    1995-01-01

    Efficiencies of 30 laser dyes for the atomic vapor laser isotope separation (AVLIS) are experimentally evaluated with a dye laser pumped by a frequency-doubled Nd:YAG laser. On the other hand, a simulation code is developed to describe the laser action of Rhodamine 6G, and the dependence of the laser efficiency on the pump wavelength is calculated. Following conclusions are obtained by these considerations:space: 1) Pyrromethene 567 showed 16% higher laser efficiency than Rhodamine 6G by 532 nm pumping, and Pyrromethene 556 has an ability to provide better efficiency by green light pumping with a Cu vapor laser; 2) Kiton red 620 and Rhodamine 640, whose efficiencies were almost the same as Rhodamine 6G by 532 nm pumping, will show better efficiencies by two-wavelength pumping with a Cu vapor laser. (author)

  3. Laser frequency modulator for modulating a laser cavity

    Science.gov (United States)

    Erbert, Gaylen V.

    1992-01-01

    The present invention relates to a laser frequency modulator for modulating a laser cavity. It is known in the prior art to utilize a PZT (piezoelectric transducer) element in combination with a mirror to change the cavity length of a laser cavity (which changes the laser frequency). Using a PZT element to drive the mirror directly is adequate at frequencies below 10 kHz. However, in high frequency applications (100 kHz and higher) PZT elements alone do not provide a sufficient change in the cavity length. The present invention utilizes an ultrasonic concentrator with a PZT element and mirror to provide modulation of the laser cavity. With an ultrasonic concentrator, the mirror element at the end of a laser cavity can move at larger amplitudes and higher frequencies.

  4. In vitro studies of morphological changes in enamel surface after Er:YAG and Nd:YAG laser irradiation, by SEM; Estudo in vitro do efeito do laser Nd:YAG e Er:YAG sobre o esmalte dental humano atraves de microscopia eletronica de varredura

    Energy Technology Data Exchange (ETDEWEB)

    Verlangieri, Eleonora Jaeger

    2001-07-01

    The caries prevention by using laser irradiation has been investigated by many authors using various lasers with different irradiations conditions. The purpose of this study was to investigated the morphological changes in enamel surface after Er:YAG and Nd:YAG laser irradiation, in vitro, by SEM. Fifteen freshly extracted, intact, caries-free, human third molars, were used in this study. The coronary portions were sectioned, from buccal to lingual direction, in two half-parts. Each one was irradiated by a different laser. The first one was irradiated with water-air spray, by a Nd:YAG laser, at 1.084 nm wave length, at 10 W, 10 Hz, 100 mJ for 60 sec., with an optical fiber in contact mode (0,32 mm of diameter); and the other half, with water-air spray by an Er:YAG laser at 2,94 micrometers wave length at the parameters of 4 Hz, 80 mJ, 24.95 J/cm{sup 2} for 60 sec. The results of this study suggested that both lasers promoted morphological changes in the enamel surface enhancing resistance and can be an alternative clinical method for caries preventions. (author)

  5. Considerações sobre a prevalência dos tratados internacionais sobre a legislação tributária brasileira: o caso do MERCOSUL

    Directory of Open Access Journals (Sweden)

    Maria de Fátima Ribeiro

    1997-12-01

    Full Text Available This is a study on the main aspects discussed in the Brazilian doctrine and the jurisprudence concerning the prevalence of international treaties and conventions for internal tax legislation. Considerations are made on the Brazilian federate and sovereignty principles and on the competence constitutionally established for all the political entities of the Brazilian State. Article 151, section III of the Federal Constitution must be pointed out for its purpose on stating that the Union shall not exempt the States, the Federal District and the Municipalities from respective taxes. Article 98 of the National Tax Code is also considered for its disposition concerning legislation from international treaties and agreements on tax norms of the positive system currently in force.Trata-se de estudo sobre os principais aspectos discutidos na doutrina e na jurisprudência brasileira sobre a prevalência dos tratados e convenções internacionais sobre a legislação tributária interna. Necessário se faz apresentar considerações sobre o princípio federativo brasileiro, o princípio da soberania e o da competência constitucionalmente estabelecida para todos os entes políticos do Estado brasileiro. Merece maior destaque o art. 151, inciso III da Constituição Federal ao enaltecer que a União não poderá conceder isenções de tributos de competência dos Estados, Distrito Federal e Municípios, bem como a análise do art. 98 do Código Tributário Nacional dispondo sobre as introduções legislativas provenientes de tratados e acordos internacionais sobre as normas tributárias do sistema positivo vigente.

  6. Etnografiando travestis: preguntas, tensiones y aprendizajes sobre el "estar ahí"

    Directory of Open Access Journals (Sweden)

    María Soledad Cutuli

    Full Text Available Este artículo interroga la construcción de vínculos etnográficos en dos obras pioneras sobre travestis, con una intención retrospectiva sobre la propia investigación en una agrupación de travestis de Buenos Aires. Se reflexiona sobre la implicancia de los/as antropólogos/as "en campo" -en tanto seres sexuados/as y generizados/as- preguntándose además sobre las formas en que son interpeladas/os durante su labor junto a integrantes de organizaciones sociales -en la que el activismo resulta ser la extensión lógica del compromiso a la reciprocidad que subyace en la práctica antropológica.

  7. DISCUTINDO SOBRE SEXTING

    Directory of Open Access Journals (Sweden)

    Suzana da Conceição de Barros

    2013-07-01

    Full Text Available Na contemporaneidade, os sujeitos vêm se utilizando das diversas tecnologias digitais, para exporem e compartilharem sua intimidade, com intuito de seduzirem e tornarem-se visíveis. Esse fenômeno vem sendo chamado de sexting, e vem sendo aderido por sujeitos de várias faixas etárias. Assim, leitor/a, convido você a pensar sobre o sexting e o que a escola tem a ver com essa prática?

  8. Laser Technology.

    Science.gov (United States)

    Gauger, Robert

    1993-01-01

    Describes lasers and indicates that learning about laser technology and creating laser technology activities are among the teacher enhancement processes needed to strengthen technology education. (JOW)

  9. ND:GLASS LASER DESIGN FOR LASER ICF FISSION ENERGY (LIFE)

    Energy Technology Data Exchange (ETDEWEB)

    Caird, J A; Agrawal, V; Bayramian, A; Beach, R; Britten, J; Chen, D; Cross, R; Ebbers, C; Erlandson, A; Feit, M; Freitas, B; Ghosh, C; Haefner, C; Homoelle, D; Ladran, T; Latkowski, J; Molander, W; Murray, J; Rubenchik, S; Schaffers, K; Siders, C W; Stappaerts, E; Sutton, S; Telford, S; Trenholme, J; Barty, C J

    2008-10-28

    We have developed preliminary conceptual laser system designs for the Laser ICF (Inertial Confinement Fusion) Fission Energy (LIFE) application. Our approach leverages experience in high-energy Nd:glass laser technology developed for the National Ignition Facility (NIF), along with high-energy-class diode-pumped solid-state laser (HEC-DPSSL) technology developed for the DOE's High Average Power Laser (HAPL) Program and embodied in LLNL's Mercury laser system. We present laser system designs suitable for both indirect-drive, hot spot ignition and indirect-drive, fast ignition targets. Main amplifiers for both systems use laser-diode-pumped Nd:glass slabs oriented at Brewster's angle, as in NIF, but the slabs are much thinner to allow for cooling by high-velocity helium gas as in the Mercury laser system. We also describe a plan to mass-produce pump-diode lasers to bring diode costs down to the order of $0.01 per Watt of peak output power, as needed to make the LIFE application economically attractive.

  10. The influence of laser-particle interaction in laser induced breakdown spectroscopy and laser ablation inductively coupled plasma spectrometry

    International Nuclear Information System (INIS)

    Lindner, Helmut; Loper, Kristofer H.; Hahn, David W.; Niemax, Kay

    2011-01-01

    Particles produced by previous laser shots may have significant influence on the analytical signal in laser-induced breakdown spectroscopy (LIBS) and laser ablation inductively coupled plasma (LA-ICP) spectrometry if they remain close to the position of laser sampling. The effects of these particles on the laser-induced breakdown event are demonstrated in several ways. LIBS-experiments were conducted in an ablation cell at atmospheric conditions in argon or air applying a dual-pulse arrangement with orthogonal pre-pulse, i.e., plasma breakdown in a gas generated by a focussed laser beam parallel and close to the sample surface followed by a delayed crossing laser pulse in orthogonal direction which actually ablates material from the sample and produces the LIBS plasma. The optical emission of the LIBS plasma as well as the absorption of the pre-pulse laser was measured. In the presence of particles in the focus of the pre-pulse laser, the plasma breakdown is affected and more energy of the pre-pulse laser is absorbed than without particles. As a result, the analyte line emission from the LIBS plasma of the second laser is enhanced. It is assumed that the enhancement is not only due to an increase of mass ablated by the second laser but also to better atomization and excitation conditions favored by a reduced gas density in the pre-pulse plasma. Higher laser pulse frequencies increase the probability of particle-laser interaction and, therefore, reduce the shot-to-shot line intensity variation as compared to lower particle loadings in the cell. Additional experiments using an aerosol chamber were performed to further quantify the laser absorption by the plasma in dependence on time both with and without the presence of particles. The overall implication of laser-particle interactions for LIBS and LA-ICP-MS/OES are discussed.

  11. The influence of laser-particle interaction in laser induced breakdown spectroscopy and laser ablation inductively coupled plasma spectrometry

    Science.gov (United States)

    Lindner, Helmut; Loper, Kristofer H.; Hahn, David W.; Niemax, Kay

    2011-02-01

    Particles produced by previous laser shots may have significant influence on the analytical signal in laser-induced breakdown spectroscopy (LIBS) and laser ablation inductively coupled plasma (LA-ICP) spectrometry if they remain close to the position of laser sampling. The effects of these particles on the laser-induced breakdown event are demonstrated in several ways. LIBS-experiments were conducted in an ablation cell at atmospheric conditions in argon or air applying a dual-pulse arrangement with orthogonal pre-pulse, i.e., plasma breakdown in a gas generated by a focussed laser beam parallel and close to the sample surface followed by a delayed crossing laser pulse in orthogonal direction which actually ablates material from the sample and produces the LIBS plasma. The optical emission of the LIBS plasma as well as the absorption of the pre-pulse laser was measured. In the presence of particles in the focus of the pre-pulse laser, the plasma breakdown is affected and more energy of the pre-pulse laser is absorbed than without particles. As a result, the analyte line emission from the LIBS plasma of the second laser is enhanced. It is assumed that the enhancement is not only due to an increase of mass ablated by the second laser but also to better atomization and excitation conditions favored by a reduced gas density in the pre-pulse plasma. Higher laser pulse frequencies increase the probability of particle-laser interaction and, therefore, reduce the shot-to-shot line intensity variation as compared to lower particle loadings in the cell. Additional experiments using an aerosol chamber were performed to further quantify the laser absorption by the plasma in dependence on time both with and without the presence of particles. The overall implication of laser-particle interactions for LIBS and LA-ICP-MS/OES are discussed.

  12. Perspectivas sobre la China contemporánea en la prensa española sobre Relaciones Internacionales (2000-2012)

    OpenAIRE

    Cocina Díaz, Rodrigo

    2013-01-01

    Un estudio de las perspectivas sobre los últimos años de la evolución histórica de China desde varias fuentes especializadas en política internacional publicadas en España, entre el año 2000 y el 2012, que incluye un análisis sobre el número de artículos publicados a lo largo del tiempo, donde se refleja la evolución del interés por el tema en dichas fuentes. Se han utilizado las revistas Política Exterior, CIDOB d'afers Internacionals, Le Monde Diplomatique en español, y la web del Observato...

  13. Excimer Laser Technology

    CERN Document Server

    Basting, Dirk

    2005-01-01

    This comprehensive survey on Excimer Lasers investigates the current range of the technology, applications and devices of this commonly used laser source, as well as the future of new technologies, such as F2 laser technology. Additional chapters on optics, devices and laser systems complete this compact handbook. A must read for laser technology students, process application researchers, engineers or anyone interested in excimer laser technology. An effective and understandable introduction to the current and future status of excimer laser technology.

  14. Liberalismo versus republicanismo: notas sobre o conceito de liberdade.

    Directory of Open Access Journals (Sweden)

    Felipe Nunes

    2007-01-01

    Full Text Available Este artigo tem como objetivo contrastar as perspectivas liberal e republicana sobre o conceito de liberdade. Através da comparação feita entre os dois modelos tecemos considerações sobre a realidade brasileira tendo como foco o atual estado de crises advindas dos casos de corrupção no país.

  15. Laser systems for on-line laser ion sources

    International Nuclear Information System (INIS)

    Geppert, Christopher

    2008-01-01

    Since its initiation in the middle of the 1980s, the resonant ionization laser ion source has been established as a reliable and efficient on-line ion source for radioactive ion beams. In comparison to other on-line ion sources it comprises the advantages of high versatility for the elements to be ionized and of high selectivity and purity for the ion beam generated by resonant laser radiation. Dye laser systems have been the predominant and pioneering working horses for laser ion source applications up to recently, but the development of all-solid-state titanium:sapphire laser systems has nowadays initiated a significant evolution within this field. In this paper an overview of the ongoing developments will be given, which have contributed to the establishment of a number of new laser ion source facilities worldwide during the last five years.

  16. Histologic evaluation of laser lipolysis: pulsed 1064-nm Nd:YAG laser versus cw 980-nm diode laser.

    Science.gov (United States)

    Mordon, Serge; Eymard-Maurin, Anne Françoise; Wassmer, Benjamin; Ringot, Jean

    2007-01-01

    The use of the laser as an auxiliary tool has refined the traditional technique for lipoplasty. During laser lipolysis, the interaction between the laser and the fat produced direct cellular destruction before the suction, reduced bleeding, and promoted skin tightening. This study sought to perform a comparative histologic evaluation of laser lipolysis with the pulsed 1064-nm Nd:YAG laser versus a continuous 980-nm diode laser. A pulsed 1064-nm Nd:YAG (Smart-Lipo; Deka, Italy) and a CW 980-nm diode laser (Pharaon, Osyris, France) were evaluated at different energy settings for lipolysis on the thighs of a fresh cadaver. The lasers were coupled to a 600-microm optical fiber inserted in a 1-mm diameter cannula. Biopsy specimens were taken on irradiated and non-irradiated areas. Hematoxylin-erythrosin-safran staining and immunostaining (anti-PS100 polyclonal antibody) were performed to identify fat tissue damage. In the absence of laser exposures (control specimens), cavities created by cannulation were seen; adipocytes were round in appearance and not deflated. At low energy settings, tumescent adipocytes were observed. At higher energy settings, cytoplasmic retraction, disruption of membranes, and heat-coagulated collagen fibers were noted; coagulated blood cells were also present. For the highest energy settings, carbonization of fat tissue involving fibers and membranes was clearly seen. For equivalent energy settings, 1064-nm and 980-nm wavelengths gave similar histologic results. Laser lipolysis is a relatively new technique that is still under development. Our histologic findings suggest several positive benefits of the laser, including skin retraction and a reduction in intraoperative bleeding. The interaction of the laser with the tissue is similar at 980 nm and 1064 nm with the same energy settings. Because higher volumes of fat are removed with higher total energy, a high-power 980-nm diode laser could offer an interesting alternative to the 1064-nm Nd

  17. Seguridad en redes y sistemas : Técnicas y conceptos sobre hacking y pentesting

    OpenAIRE

    Jiménez Jiménez, Cristian

    2016-01-01

    El siguiente documento trata sobre seguridad informática. Se detallarán técnicas y conceptos sobre seguridad en redes y sistemas, pentesting y auditorías de seguridad. El següent document tracta sobre seguretat informàtica. Es detallaran tècniques i conceptes sobre seguretat en xarxes i sistemes, pentesting i auditories de seguretat. The following document is about computer security. Techniques and network security concepts and systems, pentesting and safety practices will be described....

  18. Tapered diode laser pumped 946 nm Nd:YAG laser

    DEFF Research Database (Denmark)

    Cheng, Haynes Pak Hay; Jensen, Ole Bjarlin; Petersen, Paul Michael

    2009-01-01

    We successfully implemented a 946 nm Nd:YAG laser based on a 808 nm tapered diode pump laser. The tapered diode is developed at the Ferdinand-Braun-Institute fur Hochstfrequenztechnik in Germany. Figure 2 shows the experimental setup and results of each pump source coupled into a 1.5 mm crystal...... laser, we show that tapered diode laser pumping potentially increase the power of 946 nm lasers by a factor of two and reduce the threshold by a factor of three....

  19. High power lasers & systems

    OpenAIRE

    Chatwin, Chris; Young, Rupert; Birch, Philip

    2015-01-01

    Some laser history;\\ud Airborne Laser Testbed & Chemical Oxygen Iodine Laser (COIL);\\ud Laser modes and beam propagation;\\ud Fibre lasers and applications;\\ud US Navy Laser system – NRL 33kW fibre laser;\\ud Lockheed Martin 30kW fibre laser;\\ud Conclusions

  20. UN MODELO SOBRE CÓMO LAS ESTRATEGIAS MOTIVACIONALES RELACIONADAS CON EL COMPONENTE DE AFECTIVIDAD INCIDEN SOBRE LAS ESTRATEGIAS COGNITIVAS Y METACOGNITIVAS

    Directory of Open Access Journals (Sweden)

    José Manuel Suárez Riveiro

    2013-01-01

    Full Text Available El principal propósito de este trabajo fue el de proponer un modelo sobre cómo las estrategias motivacionales relacionadas al componente de afectividad inciden sobre la utilización de las estrategias cognitivas y metacognitivas. La muestra utilizada fue de 500 estudiantes de Secundaria. Se asumió que el efecto de las estrategias motivacionales sobre las estrategias cognitivas estaría mediado por el uso de las estrategias metacognitivas. Para estudiar estas estrategias y su relación se realizaron análisis descriptivos y se elaboró un diagrama de senderos. Los resultados mostraron que la estrategia motivacional más utilizada es la de autorrefuerzo y que se establecen relaciones significativas desde algunas estrategias motivacionales, pero no desde todas, con las estrategias cognitivas aunque únicamente la estrategia de autorrefuerzo establece relaciones significativas con la autorregulación metacognitiva.

  1. Spectroscopic and imaging diagnostics of pulsed laser deposition laser plasmas

    International Nuclear Information System (INIS)

    Thareja, Raj K.

    2002-01-01

    An overview of laser spectroscopic techniques used in the diagnostics of laser ablated plumes used for thin film deposition is given. An emerging laser spectroscopic imaging technique for the laser ablation material processing is discussed. (author)

  2. Laser-diode pumped 40-W Yb:YAG ceramic laser.

    Science.gov (United States)

    Hao, Qiang; Li, Wenxue; Pan, Haifeng; Zhang, Xiaoyi; Jiang, Benxue; Pan, Yubai; Zeng, Heping

    2009-09-28

    We demonstrated a high-power continuous-wave (CW) polycrystalline Yb:YAG ceramic laser pumped by fiber-pigtailed laser diode at 968 nm with 400 mum fiber core. The Yb:YAG ceramic laser performance was compared for different Yb(3+) ion concentrations in the ceramics by using a conventional end-pump laser cavity consisting of two flat mirrors with output couplers of different transmissions. A CW laser output of 40 W average power with M(2) factor of 5.8 was obtained with 5 mol% Yb concentration under 120 W incident pump power. This is to the best of our knowledge the highest output power in end-pumped bulk Yb:YAG ceramic laser.

  3. Ceramic Laser Materials

    Directory of Open Access Journals (Sweden)

    Guillermo Villalobos

    2012-02-01

    Full Text Available Ceramic laser materials have come a long way since the first demonstration of lasing in 1964. Improvements in powder synthesis and ceramic sintering as well as novel ideas have led to notable achievements. These include the first Nd:yttrium aluminum garnet (YAG ceramic laser in 1995, breaking the 1 KW mark in 2002 and then the remarkable demonstration of more than 100 KW output power from a YAG ceramic laser system in 2009. Additional developments have included highly doped microchip lasers, ultrashort pulse lasers, novel materials such as sesquioxides, fluoride ceramic lasers, selenide ceramic lasers in the 2 to 3 μm region, composite ceramic lasers for better thermal management, and single crystal lasers derived from polycrystalline ceramics. This paper highlights some of these notable achievements.

  4. Infrared laser system

    International Nuclear Information System (INIS)

    Cantrell, C.D.; Carbone, R.J.

    1977-01-01

    An infrared laser system and method for isotope separation may comprise a molecular gas laser oscillator to produce a laser beam at a first wavelength, Raman spin flip means for shifting the laser to a second wavelength, a molecular gas laser amplifier to amplify said second wavelength laser beam to high power, and optical means for directing the second wavelength, high power laser beam against a desired isotope for selective excitation thereof in a mixture with other isotopes. The optical means may include a medium which shifts the second wavelength high power laser beam to a third wavelength, high power laser beam at a wavelength coincidental with a corresponding vibrational state of said isotope and which is different from vibrational states of other isotopes in the gas mixture

  5. Ceramic Laser Materials

    Science.gov (United States)

    Sanghera, Jasbinder; Kim, Woohong; Villalobos, Guillermo; Shaw, Brandon; Baker, Colin; Frantz, Jesse; Sadowski, Bryan; Aggarwal, Ishwar

    2012-01-01

    Ceramic laser materials have come a long way since the first demonstration of lasing in 1964. Improvements in powder synthesis and ceramic sintering as well as novel ideas have led to notable achievements. These include the first Nd:yttrium aluminum garnet (YAG) ceramic laser in 1995, breaking the 1 KW mark in 2002 and then the remarkable demonstration of more than 100 KW output power from a YAG ceramic laser system in 2009. Additional developments have included highly doped microchip lasers, ultrashort pulse lasers, novel materials such as sesquioxides, fluoride ceramic lasers, selenide ceramic lasers in the 2 to 3 μm region, composite ceramic lasers for better thermal management, and single crystal lasers derived from polycrystalline ceramics. This paper highlights some of these notable achievements. PMID:28817044

  6. Laser cutting: industrial relevance, process optimization, and laser safety

    Science.gov (United States)

    Haferkamp, Heinz; Goede, Martin; von Busse, Alexander; Thuerk, Oliver

    1998-09-01

    Compared to other technological relevant laser machining processes, up to now laser cutting is the application most frequently used. With respect to the large amount of possible fields of application and the variety of different materials that can be machined, this technology has reached a stable position within the world market of material processing. Reachable machining quality for laser beam cutting is influenced by various laser and process parameters. Process integrated quality techniques have to be applied to ensure high-quality products and a cost effective use of the laser manufacturing plant. Therefore, rugged and versatile online process monitoring techniques at an affordable price would be desirable. Methods for the characterization of single plant components (e.g. laser source and optical path) have to be substituted by an omnivalent control system, capable of process data acquisition and analysis as well as the automatic adaptation of machining and laser parameters to changes in process and ambient conditions. At the Laser Zentrum Hannover eV, locally highly resolved thermographic measurements of the temperature distribution within the processing zone using cost effective measuring devices are performed. Characteristic values for cutting quality and plunge control as well as for the optimization of the surface roughness at the cutting edges can be deducted from the spatial distribution of the temperature field and the measured temperature gradients. Main influencing parameters on the temperature characteristic within the cutting zone are the laser beam intensity and pulse duration in pulse operation mode. For continuous operation mode, the temperature distribution is mainly determined by the laser output power related to the cutting velocity. With higher cutting velocities temperatures at the cutting front increase, reaching their maximum at the optimum cutting velocity. Here absorption of the incident laser radiation is drastically increased due to

  7. Laser wakefield acceleration with high-power, few-cycle mid-IR lasers

    OpenAIRE

    Papp, Daniel; Wood, Jonathan C.; Gruson, Vincent; Bionta, Mina; Gruse, Jan-Niclas; Cormier, Eric; Najmudin, Zulfikar; Légaré, François; Kamperidis, Christos

    2018-01-01

    The study of laser wakefield electron acceleration (LWFA) using mid-IR laser drivers is a promising path for future laser driven electronaccelerators, when compared to traditional near-IR laser drivers uperating at 0.8-1 {\\mu}m central wavelength ({\\lambda}laser), as the necessary vector potential a_0 for electron injection can be achieved with smaller laser powers due to the linear dependence on {\\lambda}laser. In this work, we perform 2D PIC simulations on LWFA using few-cycle high power (5...

  8. Contabilidad de Costos I. - Problemas sobre contabilización de las actividades relacionadas con los materiales

    OpenAIRE

    Morillo Moreno, Marysela C.

    2008-01-01

    ÍNDICE Introducción Problemas sobre terminología básica Problemas básicos sobre el Ciclo de la Contabilidad de Costos Problemas sobre contabilización de las actividades relacionadas con los materiales Problemas sobre la contabilización de las actividades relacionadas con la mano de obra Problemas sobre la contabilización de las actividades relacionadas con los costos indirectos de fabricación Problemas sobre el Ciclo de la Contabilida...

  9. Laser requirements for a laser fusion energy power plant

    Institute of Scientific and Technical Information of China (English)

    Stephen; E.Bodner; Andrew; J.Schmitt; John; D.Sethian

    2013-01-01

    We will review some of the requirements for a laser that would be used with a laser fusion energy power plant, including frequency, spatial beam smoothing, bandwidth, temporal pulse shaping, efficiency, repetition rate, and reliability. The lowest risk and optimum approach uses a krypton fluoride gas laser. A diode-pumped solid-state laser is a possible contender.

  10. Investigación sobre implementación y gobernanza

    DEFF Research Database (Denmark)

    Cejudo,, Guillermo M.; May, Peter J.; Sætren, Harald

    2018-01-01

    . Cejudo, María del Carmen Pardo y Mauricio I. Dussauge Laguna (todos de la División de Ad­ministración Pública del CIDE), cerró con un panel sobre “investigación sobre implementación y gobernanza: direcciones y retos para el futuro”. Lo que sigue es una versión editada de esa discusión de clausura....

  11. Sobre manhãs, humor e atos de fala

    Directory of Open Access Journals (Sweden)

    Joana Plaza PINTO

    Full Text Available RESUMO Este ensaio apresenta uma trajetória de leituras de Frege a Austin, intermediadas pela interpretação independente e ousada de Kanavillil Rajagopalan. Ao argumentar sobre uma gama de aproximações teóricas entre Frege e Austin, este ensaio narra a importância da interpretação de Rajagopalan para o debate sobre Austin no Brasil.

  12. LaserFest Celebration

    Energy Technology Data Exchange (ETDEWEB)

    Dr. Alan Chodos; Elizabeth A. Rogan

    2011-08-25

    LaserFest was the yearlong celebration, during 2010, of the 50th anniversary of the demonstration of the first working laser. The goals of LaserFest were: to highlight the impact of the laser in its manifold commercial, industrial and medical applications, and as a tool for ongoing scientific research; to use the laser as one example that illustrates, more generally, the route from scientific innovation to technological application; to use the laser as a vehicle for outreach, to stimulate interest among students and the public in aspects of physical science; to recognize and honor the pioneers who developed the laser and its many applications; to increase awareness among policymakers of the importance of R&D funding as evidenced by such technology as lasers. One way in which LaserFest sought to meet its goals was to encourage relevant activities at a local level all across the country -- and also abroad -- that would be identified with the larger purposes of the celebration and would carry the LaserFest name. Organizers were encouraged to record and advertise these events through a continually updated web-based calendar. Four projects were explicitly detailed in the proposals: 1) LaserFest on the Road; 2) Videos; 3) Educational material; and 4) Laser Days.

  13. Development of high-power CO2 lasers and laser material processing

    Science.gov (United States)

    Nath, Ashish K.; Choudhary, Praveen; Kumar, Manoj; Kaul, R.

    2000-02-01

    Scaling laws to determine the physical dimensions of the active medium and optical resonator parameters for designing convective cooled CO2 lasers have been established. High power CW CO2 lasers upto 5 kW output power and a high repetition rate TEA CO2 laser of 500 Hz and 500 W average power incorporated with a novel scheme for uniform UV pre- ionization have been developed for material processing applications. Technical viability of laser processing of several engineering components, for example laser surface hardening of fine teeth of files, laser welding of martensitic steel shroud and titanium alloy under-strap of turbine, laser cladding of Ni super-alloy with stellite for refurbishing turbine blades were established using these lasers. Laser alloying of pre-placed SiC coating on different types of aluminum alloy, commercially pure titanium and Ti-6Al-4V alloy, and laser curing of thermosetting powder coating have been also studied. Development of these lasers and results of some of the processing studies are briefly presented here.

  14. Orden de no reanimar, consideraciones sobre este problema

    Directory of Open Access Journals (Sweden)

    Dr. G. Luis Cereceda

    2011-05-01

    Se analizan los principales problemas, comenzando por las dificultades según los diferentes escenarios (servicio de urgencia, pabellón de maternidad, sala de hospitalizados, unidad de intensivo, pabellones quirúrgicos; se analiza la incertidumbre sobre el pronóstico de cada pacientes y sobre quién(es deben tomar las decisiones sobre el fin de la vida. Idealmente debe ser el paciente autónomo quien tome la decisión, pero en otros casos se requieren alternativas, una de ellas es la Orden Unilateral. Otros problemas son la Validez de las órdenes de no-RCP en los diferentes tiempos evolutivos, el problema de la Futilidad y la Validez de las “Directivas Anticipadas”, en este grupo resalta el enfoque POLST (Physician’s Order for Life Sustaining Treatment como más comprehensivo; como complemento ha surgido también el concepto AND (Allow Natural Death, que podría estar destinado a remplazar la orden de no-RCP (DNR.

  15. Sobre el Contenido de los Marcos Conceptuales Contables

    Directory of Open Access Journals (Sweden)

    Leila Di Russo de Hauque

    2007-12-01

    Full Text Available El presente trabajo tiene como objetivo el análisis de los distintos marcos conceptuales vigentes en diferentes sistemas normativos contables. Paralelamente a las revisiones empíricas que dicho trabajo determina, incluye reflexiones a priori sobre el contenido de dichos marcos conceptuales. El trabajo discurre inicialmente sobre el problema de la naturaleza normativa o doctrinaria de sus contenidos tradicionales sin inclinarse definitivamente por una u otra vertiente. Respecto de los elementos que se incluirán en ellos, se justifica la inclusión de las listas de objetivos y requisitos de la información contable para definir el alcance del concepto de informe de uso externo. Además se define a favor de la inclusión, conjuntamente con las respuestas a las pregunas básicas sobre la labor contable, de contenidos ligados al proceso de obtención y de la exposición de la información contable de uso externo.

  16. Uma Reflexão sobre Autoria Acadêmica

    Directory of Open Access Journals (Sweden)

    Francisco José da Costa

    2017-06-01

    Full Text Available Este estudo tem como objetivo apresentar elementos para um debate sobre a ética das práticas de autoria no campo científico brasileiro. Os autores utilizam exemplos ilustrativos para explorar as práticas de pseudoautoria, estabelecendo relações entre essas práticas, as coerções oriundas do campo acadêmico e o habitus dos agentes sociais. Foi elaborada uma definição preliminar do que seja autoria a fim de possibilitar a discussão sobre dois problemas centrais, que são: a lógica de “colocar o nome” e o plágio. Uma das principais contribuições deste trabalho repousa na reflexão orientada para a construção de uma prática aperfeiçoada de autoria, possibilitando a crítica e a autocrítica dos agentes do meio acadêmico sobre algumas práticas problemáticas de autoria.

  17. Hegel sobre Tácito y la libertad teutona

    Directory of Open Access Journals (Sweden)

    Valerio Rocco Lozano

    2015-09-01

    Full Text Available Una investigación sobre la presencia (así como sobre la ausencia de Tácito en Hegel es crucial para entender la posición política y filosófica de este pensador, especialmente en la época de Jena. Tras algunas consideraciones sobre el conocimiento hegeliano de la historia y la cultura romanas, se abordará un análisis de su noción de "libertad teutona": Hegel se opone tanto a la neo-romanidad de los revolucionarios franceses como al esencialismo teutómano de los conservadores alemanes (derivado fundamentalmente de un uso fuertemente ideológico de la "Germania" de Tácito, así como a las caducas instituciones imperiales. Esta doble oposición sitúa a Hegel en medio de dos corrientes políticas (e incluso de dos ejércitos en guerra y se lleva a cabo desde una actitud que puede denominarse como “mediación sin nostalgia”

  18. Laser plasma instability experiments with KrF lasers

    International Nuclear Information System (INIS)

    Weaver, J. L.; Karasik, M.; Serlin, V.; Obenschain, S.; Chan, L-Y.; Kehne, D.; Schmitt, A. J.; Colombant, D.; Velikovich, A.; Oh, J.; Lehmberg, R. H.; Afeyan, B.; Phillips, L.; Seely, J.; Brown, C.; Feldman, U.; Aglitskiy, Y.; Mostovych, A. N.; Holland, G.

    2007-01-01

    Deleterious effects of laser-plasma instability (LPI) may limit the maximum laser irradiation that can be used for inertial confinement fusion. The short wavelength (248 nm), large bandwidth, and very uniform illumination available with krypton-fluoride (KrF) lasers should increase the maximum usable intensity by suppressing LPI. The concomitant increase in ablation pressure would allow implosion of low-aspect-ratio pellets to ignition with substantial gain (>20) at much reduced laser energy. The proposed KrF-laser-based Fusion Test Facility (FTF) would exploit this strategy to achieve significant fusion power (150 MW) with a rep-rate system that has a per pulse laser energy well below 1 MJ. Measurements of LPI using the Nike KrF laser are presented at and above intensities needed for the FTF (I∼2x10 15 W/cm 2 ). The results to date indicate that LPI is indeed suppressed. With overlapped beam intensity above the planar, single beam intensity threshold for the two-plasmon decay instability, no evidence of instability was observed via measurements of (3/2)ω o and (1/2)ω o harmonic emissions

  19. Physics of laser fusion. Volume III. High-power pulsed lasers

    International Nuclear Information System (INIS)

    Holzrichter, J.F.; Eimerl, D.; George, E.V.; Trenholme, J.B.; Simmons, W.W.; Hunt, J.T.

    1982-09-01

    High-power pulsed lasers can deliver sufficient energy on inertial-confinement fusion (ICF) time scales (0.1 to 10 ns) to heat and compress deuterium-tritium fuel to fusion-reaction conditions. Several laser systems have been examined, including Nd:glass, CO 2 , KrF, and I 2 , for their ICF applicability. A great deal of developmental effort has been applied to the Nd:glass laser and the CO 2 gas laser systems; these systems now deliver > 10 4 J and 20 x 10 12 W to ICF targets. We are constructing the Nova Nd:glass laser at LLNL to provide > 100 kJ and > 100 x 10 12 W of 1-μm radiation for fusion experimentation in the mid-1980s. For ICF target gain > 100 times the laser input, we expect that the laser driver must deliver approx. 3 to 5 MJ of energy on a time scale of 10 to 20 ns. In this paper we review the technological status of fusion-laser systems and outline approaches to constructing high-power pulsed laser drivers

  20. Sobre historia mundial hoy

    Directory of Open Access Journals (Sweden)

    Vera Weiler

    2001-01-01

    Full Text Available Los procesos de globalización son una realidad; su enorme impacto sobre la vida humana los ha convertido en un tema recurrente sobre el que se escribe y se comenta a diario también en Colombia. Los libros que de ellos tratan, ante todo los que 10 hacen en tono crítico, baten records en la industria editorial en todo el mundo. Las expectativas que acerca del futuro abrigan cientos de millones de personas se relacionan con 10 que ellas esperan, para bien o para mal, de la globalización. Las posturas que los gobernantes ocupan al respecto en el mundo son, cuando menos de aceptación, generalmente de activa participación en pos de la globalización. Por un lado, crece la preocupación y se multiplican las protestas; por el otro, dominan los razonamientos de los especialistas en materia de maximización de los rendimientos de los capitales que presentan la globalización, al estilo que se viene imponiendo, como el camino ineludible del gobierno universal de la eficiencia. ¿Tienen que decir algo los historiadores frente a todo esto?.

  1. Raman fiber lasers

    CERN Document Server

    2017-01-01

    This book serves as a comprehensive, up-to-date reference about this cutting-edge laser technology and its many new and interesting developments. Various aspects and trends of Raman fiber lasers are described in detail by experts in their fields. Raman fiber lasers have progressed quickly in the past decade, and have emerged as a versatile laser technology for generating high power light sources covering a spectral range from visible to mid-infrared. The technology is already being applied in the fields of telecommunication, astronomy, cold atom physics, laser spectroscopy, environmental sensing, and laser medicine. This book covers various topics relating to Raman fiber laser research, including power scaling, cladding and diode pumping, cascade Raman shifting, single frequency operation and power amplification, mid-infrared laser generation, specialty optical fibers, and random distributed feedback Raman fiber lasers. The book will appeal to scientists, students, and technicians seeking to understand the re...

  2. Effect of laser spot size on energy balance in laser induced plasmas

    International Nuclear Information System (INIS)

    Pant, H.C.; Sharma, S.; Bhawalkar, D.D.

    1980-01-01

    The effect of the laser spot size on laser light absorption in laser induced plasmas from solid targets was studied. It was found that at a constant laser intensity on the target, reduction in the laser spot size enhances the net laser energy absorption. It was also observed that the laser light reflection from the target becomes more diffused when the focal spot size is reduced

  3. Reflexões sobre biopoder e pos-colonialismo: relendo Fanon e Foucault

    Directory of Open Access Journals (Sweden)

    Cunha Olívia Maria Gomes da

    2002-01-01

    Full Text Available Autores como Michel Foucault e Franz Fanon têm figurado de forma influente tanto em estudos sobre questões relativas a estratégias de poder e representação em contextos pós-coloniais, quanto em debates e análises de ordem teórica sobre pós-colonialismo. Particularmente, as noções de biopoder e governamentalidade, originárias do pensamento de Foucault, e as reflexões de Fanon sobre a construção de formas de subjetivação racializadas e coloniais, têm ensejado um amplo debate sobre a permanência e circulação de retóricas raciais transnacionais. Através da leitura de David Scott, em Refashioning Futures - Criticism after Postcoloniality (1999, e Paul Gilroy, em Against Race - Imagining Political Culture beyond the Color Line (2000, este ensaio procura identificar a pertinência da combinação de ambos os autores em estudos que, de forma distinta, se debruçam sobre a complexa relação entre corpo e modernidade e suas implicações nos campos político e intelectual contemporâneos.

  4. Pequena monografia sobre o Rio Grande do Sul

    Directory of Open Access Journals (Sweden)

    Ana Maria Pinho

    2014-05-01

    Full Text Available Pequena monografia desenvolvida por membros do Colégio Sevigne, que versa sobre diversos assuntos a respeito do Rio Grande do Sul, divididos em histórico, fronteiras, organização política administrativa, características geográficas, formação geomorfológica, economia, aspectos históricos e geográficos da capital do Estado, generalidades étnicas, e sobre o gaúcho em si. Grande quantidade de ilustrações e poemas enriquecem o artigo.

  5. Influence of laser parameters on laser ultrasonic efficiency

    CSIR Research Space (South Africa)

    Forbes, A

    2007-01-01

    Full Text Available , TEA CO2 lasers, laser chemistry, short pulses 1. INTRODUCTION Polymer-matrix composites are increasingly used in the aerospace industry, particularly in the manufacture of modern fighter planes1-3. The number and complexity of such composites... efficiency can be improved by utilising short pulses in the 3–4 µm and 10 µm spectral regions1. Short pulse 10 µm radiation can be produced by transversely excited, atmospheric CO2 (TEA CO2) lasers. Due to the technological maturity of these lasers...

  6. Improving the laser brightness of a commercial laser system

    Science.gov (United States)

    Naidoo, Darryl; Litvin, Igor; Forbes, Andrew

    2016-02-01

    We investigate the selection of a flat-top beam and a Gaussian beam inside a laser cavity on opposing mirrors. The concept is tested external to the laser cavity in a single pass and double pass regime where the latter mimics a single round trip in the laser. We implement this intra-cavity selection through the use of two 16 level diffractive optical elements. We consider a solid-state diode side-pumped laser resonator in a typical commercial laser configuration that consists of two planar mirrors where the DOEs are positioned at the mirrors. We out couple the Gaussian and flat-top distributions and we show that we improve the brightness of the laser with active mode control. We also demonstrate that the quality of the beam transformations determine the brightness improvement.

  7. Navigated Pattern Laser System versus Single-Spot Laser System for Postoperative 360-Degree Laser Retinopexy.

    Science.gov (United States)

    Kulikov, Alexei N; Maltsev, Dmitrii S; Boiko, Ernest V

    2016-01-01

    Purpose . To compare three 360°-laser retinopexy (LRP) approaches (using navigated pattern laser system, single-spot slit-lamp (SL) laser delivery, and single-spot indirect ophthalmoscope (IO) laser delivery) in regard to procedure duration, procedural pain score, technical difficulties, and the ability to achieve surgical goals. Material and Methods . Eighty-six rhegmatogenous retinal detachment patients (86 eyes) were included in this prospective randomized study. The mean procedural time, procedural pain score (using 4-point Verbal Rating Scale), number of laser burns, and achievement of the surgical goals were compared between three groups (pattern LRP (Navilas® laser system), 36 patients; SL-LRP, 28 patients; and IO-LRP, 22 patients). Results . In the pattern LRP group, the amount of time needed for LRP and pain level were statistically significantly lower, whereas the number of applied laser burns was higher compared to those in the SL-LRP group and in the IO-LRP group. In the pattern LRP, SL-LRP, and IO-LRP groups, surgical goals were fully achieved in 28 (77.8%), 17 (60.7%), and 13 patients (59.1%), respectively ( p > 0.05). Conclusion . The navigated pattern approach allows improving the treatment time and pain in postoperative 360° LRP. Moreover, 360° pattern LRP is at least as effective in achieving the surgical goal as the conventional (slit-lamp or indirect ophthalmoscope) approaches with a single-spot laser.

  8. Practical laser safety

    International Nuclear Information System (INIS)

    Winburn, D.C.

    1985-01-01

    This book includes discussions of the following topics: characteristics of lasers; eye components; skin damage thresholds; classification of lasers by ANSI Z136.1; selecting laser-protective eyewear; hazards associated with lasers; and, an index

  9. Lasers technology

    International Nuclear Information System (INIS)

    2014-01-01

    The Laser Technology Program of IPEN is developed by the Center for Lasers and Applications (CLA) and is committed to the development of new lasers based on the research of new optical materials and new resonator technologies. Laser applications and research occur within several areas such as Nuclear, Medicine, Dentistry, Industry, Environment and Advanced Research. Additional goals of the Program are human resource development and innovation, in association with Brazilian Universities and commercial partners

  10. LASERS: A cryogenic slab CO laser

    Science.gov (United States)

    Ionin, Andrei A.; Kozlov, A. Yu; Seleznev, L. V.; Sinitsyn, D. V.

    2009-03-01

    A compact capacitive transverse RF-discharge-pumped slab CO laser with cryogenically cooled electrodes, which operates both in the cw and repetitively pulsed regimes, is fabricated. The laser operation is studied in the free running multifrequency regime at the vibrational - rotational transitions of the fundamental (V + 1 → V) vibrational bands of the CO molecule in the spectral region from 5.1 to 5.4 μm. Optimal operation conditions (gas mixture composition and pressure, RF pump parameters) are determined. It is shown that only gas mixtures with a high content of oxygen (up to 20% with respect to the concentration of CO molecules) can be used as an active medium of this laser. It is demonstrated that repetitively pulsed pumping is more efficient compared to cw pumping. In this case, quasi-cw lasing regime can be obtained. The maximum average output power of ~12 W was obtained for this laser operating on fundamental bands and its efficiency achieved ~14 %. The frequency-selective operation regime of the slab RF-discharge-pumped CO laser was realised at ~ 100 laser lines in the spectral region from 5.0 to 6.5 μm with the average output power of up to several tens of milliwatts in each line. Lasing at the transitions of the first vibrational overtone (V + 2 → V) of the CO molecule is obtained in the spectral region from 2.5 to 3.9 μm. The average output power of the overtone laser achieved 0.3 W. All the results were obtained without the forced gas mixture exchange in the discharge chamber. Under fixed experimental conditions, repetitively pulsed lasing (with fluctuations of the output characteristics no more than ±10 %) was stable for more than an hour.

  11. Laser Stabilization with Laser Cooled Strontium

    DEFF Research Database (Denmark)

    Christensen, Bjarke Takashi Røjle

    The frequency stability of current state-of-the-art stabilized clock lasers are limited by thermal fluctuations of the ultra-stable optical reference cavities used for their frequency stabilization. In this work, we study the possibilities for surpassing this thermal limit by exploiting the nonli......The frequency stability of current state-of-the-art stabilized clock lasers are limited by thermal fluctuations of the ultra-stable optical reference cavities used for their frequency stabilization. In this work, we study the possibilities for surpassing this thermal limit by exploiting...... the nonlinear effects from coupling of an optical cavity to laser cooled atoms having a narrow transition linewidth. Here, we have realized such a system where a thermal sample of laser cooled strontium-88 atoms are coupled to an optical cavity. The strontium-88 atoms were probed on the narrow 1S0-3P1 inter......-combination line at 689 nm in a strongly saturated regime. The dynamics of the atomic induced phase shift and absorption of the probe light were experimentally studied in details with the purpose of applications to laser stabilization. The atomic sample temperature was in the mK range which brought this system out...

  12. Measurements of laser parameters for the Shiva laser fusion facility

    International Nuclear Information System (INIS)

    Ozarski, R.G.

    1979-01-01

    Large laser systems require numerous laser diagnostics to provide configuration, performance and maintenance data to permit efficient operation. The following diagnostics for a large laser system named Shiva are discussed: (1) description of Shiva laser system, (2) what measurements are desired and or required and why, (3) what measurement techniques and packages are employed and a brief description of the operating principles of the sensors employed, and (4) the laser diagnostic data acquisition and display system

  13. Laser beam-plasma plume interaction during laser welding

    Science.gov (United States)

    Hoffman, Jacek; Moscicki, Tomasz; Szymanski, Zygmunt

    2003-10-01

    Laser welding process is unstable because the keyhole wall performs oscillations which results in the oscillations of plasma plume over the keyhole mouth. The characteristic frequencies are equal to 0.5-4 kHz. Since plasma plume absorbs and refracts laser radiation, plasma oscillations modulate the laser beam before it reaches the workpiece. In this work temporary electron densities and temperatures are determined in the peaks of plasma bursts during welding with a continuous wave CO2 laser. It has been found that during strong bursts the plasma plume over the keyhole consists of metal vapour only, being not diluted by the shielding gas. As expected the values of electron density are about two times higher in peaks than their time-averaged values. Since the plasma absorption coefficient scales as ~N2e/T3/2 (for CO2 laser radiation) the results show that the power of the laser beam reaching the metal surface is modulated by the plasma plume oscillations. The attenuation factor equals 4-6% of the laser power but it is expected that it is doubled by the refraction effect. The results, together with the analysis of the colour pictures from streak camera, allow also interpretation of the dynamics of the plasma plume.

  14. Para-hydrogen raman laser and its application to laser induced chemistry

    International Nuclear Information System (INIS)

    Tashiro, Hideo

    1988-01-01

    The report outlines the mechanism of the para-hydrogen Raman laser as a infrared light source, and its application to laser induced chemistry. The Stoke's wave number after a Raman shift is equal to the difference between the wave number of the CO 2 laser used for excitation and the rotation Raman wave number of the hydrogen molecule. A Raman laser can serve as an infrared source. CO 2 laser oscillation beam in the range of 9∼11 micrometers is selected and the frequency of infrared beam is varied by changing the wave number of the CO 2 laser beam. A problem with the Raman laser is that the Raman scatterring gain is small due to a large wavelength. In developing equipment, a special mechanism is required to solve this problem. A Raman laser comprises a CO 2 laser for excitation and multi-pulse Raman cells. The combination of a TEA oscillator and amplifiers gives CO 2 pulses with a peak power of about several tens of MW. Many heavy metal compounds including fluorides, carbonyl compounds and other organic compounds, absorb light with wavelengths in the same range as those of the Raman laser. Such compounds can be dissociated directly by applying Raman laser beams. The laser will be helpful for separation of isotopes, etc. (Nogami, K.)

  15. Laser material processing

    CERN Document Server

    Steen, William

    2010-01-01

    This text moves from the basics of laser physics to detailed treatments of all major materials processing techniques for which lasers are now essential. New chapters cover laser physics, drilling, micro- and nanomanufacturing and biomedical laser processing.

  16. Welding shape memory alloys with NdYAG lasers Soldadura de ligas de memória de forma com laser Nd-YAG

    Directory of Open Access Journals (Sweden)

    Luisa Quintino

    2012-09-01

    os materias base têm propriedades diferentes com consquentes diferenças no escoamento térmico, movimentação de fuido e distribuição de tensões residuais. A composição química varia ao longo do banho de fusão e formam-se compostos intermetálicos. É essencial realizar-se investigação sobre estes efeitos do processamento laser de NiTi para ultrapassar este desafio. O presente estudo visa analisar os efeitos da soldadura a laser na forma do cordão de soldadura em juntas similares e dissimilares de NiTi com aço inoxidável e ligas de titâneo.

  17. Lasers in space

    Science.gov (United States)

    Michaelis, M. M.; Forbes, A.; Bingham, R.; Kellett, B. J.; Mathye, A.

    2008-05-01

    A variety of laser applications in space, past, present, future and far future are reviewed together with the contributions of some of the scientists and engineers involved, especially those that happen to have South African connections. Historically, two of the earliest laser applications in space, were atmospheric LIDAR and lunar ranging. These applications involved atmospheric physicists, several astronauts and many of the staff recruited into the Soviet and North American lunar exploration programmes. There is a strong interest in South Africa in both LIDAR and lunar ranging. Shortly after the birth of the laser (and even just prior) theoretical work on photonic propulsion and space propulsion by laser ablation was initiated by Georgii Marx, Arthur Kantrowitz and Eugen Saenger. Present or near future experimental programs are developing in the following fields: laser ablation propulsion, possibly coupled with rail gun or gas gun propulsion; interplanetary laser transmission; laser altimetry; gravity wave detection by space based Michelson interferometry; the de-orbiting of space debris by high power lasers; atom laser interferometry in space. Far future applications of laser-photonic space-propulsion were also pioneered by Carl Sagan and Robert Forward. They envisaged means of putting Saenger's ideas into practice. Forward also invented a laser based method for manufacturing solid antimatter or SANTIM, well before the ongoing experiments at CERN with anti-hydrogen production and laser-trapping. SANTIM would be an ideal propellant for interstellar missions if it could be manufactured in sufficient quantities. It would be equally useful as a power source for the transmission of information over light year distances. We briefly mention military lasers. Last but not least, we address naturally occurring lasers in space and pose the question: "did the Big Bang lase?"

  18. ¿Es obligatoria la Declaración sobre Medios?

    Directory of Open Access Journals (Sweden)

    Leonard R. Sussman

    2015-01-01

    Full Text Available Siempre propició Ciespal la información sobre el Nuevo Orden Mundial de la Información y abrió las páginas de Chasqui para el debate de las dos tendencias contrapuestas. Ciespal lideró la tesis del Nuevo Orden pero mantuvo la objetividad enla información y el equilibrio en los espacios dados al debate. Así, en su primer número trató sobre el Informe MacBride y en el segundo y tercero sobre la posición de los Estados Unidos. A propósito del retiro de este país del seno de la UNESCO la controversia ha tomado un sesgo nuevo. El presente artículo, desde una posición alineada con la tesis de los Estados Unidos, ofrece ciertas conciliaciones. El lector tiene la palabra.

  19. Frequency-doubled diode laser for direct pumping of Ti:sapphire lasers

    DEFF Research Database (Denmark)

    Müller, André; Jensen, Ole Bjarlin; Unterhuber, Angelika

    2012-01-01

    . However, the superior electro-optical efficiency of the diode laser improves the overall efficiency of the Ti:sapphire laser by a factor > 2. The optical spectrum emitted by the Ti:sapphire laser shows a spectral width of 112 nm (FWHM). Based on autocorrelation measurements, pulse widths of less than 20...... fs are measured. These results open the opportunity of establishing diode laser pumped Ti:sapphire lasers for e.g. biophotonic applications like retinal optical coherence tomography or pumping of photonic crystal fibers for CARS microscopy.......A single-pass frequency doubled high-power tapered diode laser emitting nearly 1.3 W of green light suitable for direct pumping of Ti:sapphire lasers generating ultrashort pulses is demonstrated. The pump efficiencies reached 75 % of the values achieved with a commercial solid-state pump laser...

  20. Excimer laser applications

    International Nuclear Information System (INIS)

    Fantoni, R.

    1988-01-01

    This lecture deals with laser induced material photoprocessing, especially concerning those processes which are initiated by u.v. lasers (mostly excimer laser). Advantages of using the u.v. radiation emitted by excimer lasers, both in photophysical and photochemical processes of different materials, are discussed in detail. Applications concerning microelectronics are stressed with respect to other applications in different fields (organic chemistry, medicine). As further applications of excimer lasers, main spectroscopic techniques for ''on line'' diagnostics which employ excimer pumped dye lasers, emitting tunable radiation in the visible and near u.v. are reviewed

  1. Aplicação do laser 808nm na dor articular crônica de ratos Wistar Aplication of 808nm laser in chronic joint pain in Wistar rats

    Directory of Open Access Journals (Sweden)

    Gladson Ricardo Flor Bertolini

    2009-08-01

    Full Text Available Durante o processo inflamatório, alguns tipos de células predominam e estão envolvidos com a produção de dor. O laser de baixa potência mostra-se útil no controle de mediadores inflamatórios, mas a ampla divergência nos parâmetros dosimétricos, conduz a variações nos resultados positivos. O objetivo deste estudo foi analisar o uso do laser 808nm, na dor articular crônica e edema de ratos Wistar submetidos a sinovite. Foram utilizados 10 ratos Wistar, divididos em dois grupos: GC - indução de sinovite em joelho direito e tratamento placebo; GT - indução de sinovite e irradiado com laser 10J/cm². Para a produção de sinovite foram injetados 100µl de formalina a 5%, no espaço articular tibiofemoral direito. A avaliação da dor ocorreu pelo tempo de elevação da pata (TEP. No 10º dia após a indução de sinovite, iniciou-se o tratamento com laser sobre a face articular medial do joelho, procedimento mantido no decorrer de 10 dias. Os resultados mostraram que o laser apresentou efeitos analgésicos, visto que, para o grupo tratado, houve redução significativa nos valores de TEP, indicando redução da dor, quando comparados os valores pós-tratamento com os pré-tratamento, o que não ocorreu para o grupo que recebeu tratamento placebo; para o edema, o laser também mostrou redução significativa do mesmo. Concluiu-se que o laser 808nm, com 10J/cm², é eficaz na redução da dor articular crônica e edema, em animais submetidos a sinovite experimental.During the inflammatory process some kinds of cells are predominant and are involved with pain production. Low power laser seems to be useful in the control of inflammatory mediators, but wide divergence in the dosemetric parameters leads to variations in its positive results. The aim of this study was to assess the use of the 808nm laser in the chronic joint pain and edema of Wistar rats submitted to synovitis. Sample was composed of 10 Wistar rats divided in two groups

  2. Technological laser application

    International Nuclear Information System (INIS)

    Shia, D.O.; Kollen, R.; Rods, U.

    1980-01-01

    Problems of the technological applications of lasers are stated in the popular form. Main requirements to a technological laser as well as problems arising in designing any system using lasers have been considered. Areas of the laser applications are described generally: laser treatment of materials, thermal treatment, welding, broach and drilling of holes, scribing, microtreatment and adjustment of resistors, material cutting, investigations into controlled thermonuclear fussion

  3. Nosso passado terá um futuro? Reflexões sobre a arqueologia

    Directory of Open Access Journals (Sweden)

    Arno Alvarez Kern

    2017-07-01

    Full Text Available O homem é uma extraordinária singularidade no mundo dos seres vivos ao se perguntar sobre as suas origens, ao construir discursos míticos ou históricos sobre seu passado e ao escavar o solo e encontrar os arquivos, que contêm os vestígios de seus antecessores. Somos responsáveis por esses milhares de vestígios da cultura material, que nos abrem novas perspectivas através de seu estudo, em busca das respostas que cada geração formula sobre o seu passado e o da humanidade. O artigo evoca reflexões sobre a epistemologia e a função social da arqueologia, destacando a relevância do estudo, a compreensão e a proteção dos testemunhos documentais, para garantir, assim, a sobrevivência do futuro de nosso passado, enquanto humanidade.

  4. Effects of laser fluence on silicon modification by four-beam laser interference

    International Nuclear Information System (INIS)

    Zhao, Le; Li, Dayou; Wang, Zuobin; Yue, Yong; Zhang, Jinjin; Yu, Miao; Li, Siwei

    2015-01-01

    This paper discusses the effects of laser fluence on silicon modification by four-beam laser interference. In this work, four-beam laser interference was used to pattern single crystal silicon wafers for the fabrication of surface structures, and the number of laser pulses was applied to the process in air. By controlling the parameters of laser irradiation, different shapes of silicon structures were fabricated. The results were obtained with the single laser fluence of 354 mJ/cm 2 , 495 mJ/cm 2 , and 637 mJ/cm 2 , the pulse repetition rate of 10 Hz, the laser exposure pulses of 30, 100, and 300, the laser wavelength of 1064 nm, and the pulse duration of 7–9 ns. The effects of the heat transfer and the radiation of laser interference plasma on silicon wafer surfaces were investigated. The equations of heat flow and radiation effects of laser plasma of interfering patterns in a four-beam laser interference distribution were proposed to describe their impacts on silicon wafer surfaces. The experimental results have shown that the laser fluence has to be properly selected for the fabrication of well-defined surface structures in a four-beam laser interference process. Laser interference patterns can directly fabricate different shape structures for their corresponding applications

  5. Laser innovated manufacturing technology; Laser ga seisan gijutsu wo kakushinshita

    Energy Technology Data Exchange (ETDEWEB)

    Maruyama, I. [Honda Motor Co. Ltd., Tokyo (Japan)

    1996-11-01

    This paper looks back the history of applications of laser processing in the automobile industry, and introduces contents of some particularly unique applications from among them. The CO2 laser and YAG laser that are used mainly have increased their outputs with the times, and 50-kW CO2 laser and 4-kW YAG laser have now become available commercially. The laser processing has become used widely for cutting purpose in Japan, which is in contrast with their high application to welding in Europe and America. Cutting thick plates has been developed recently, which is applicable to plates as thick as about 25 mm. A flexible system in which YAG laser is combined with an optical fiber/articulated robot is operating for three-dimensional shape processing. Automobile makers are adopting laser processing for welding in place of the electron beam welding that has been used conventionally. The process is used also for a number of other applications including surface reformation, such as surface quenching for cylinder liner, and valve seat padding. 8 refs., 8 figs.

  6. Cultura y compromiso afectivo: ¿influyen sobre la transferencia interna del conocimiento?

    Directory of Open Access Journals (Sweden)

    Aurora Irma Máynez Guaderrama

    2016-01-01

    Full Text Available En la nueva economía el conocimiento se reconoce como un activo estratégico, y su transferencia se destaca como una actividad relevante. Por ello, en este trabajo de investigación se examina la influencia de la cultura or ganizacional y del compromiso afectivo sobre la transferencia interna de conocimiento en la empresa; además, se analiza si la cultura de la organización influye significativamente sobre el compromiso afectivo. P ara ello, se llevó a cabo una investigación transversal en una muestra no probabilística de 342 sujetos que laboran en el sector industrial localizado en la frontera norte de México. El análisis estadístico se realizó a través de un modelo de ecuaciones estructurales. Los resultados confirman que la cultura organizacional incide positiva y significativamente sobre la transferencia interna de conocimiento y sobre el compromiso afecti vo. Asimismo, la evidencia empírica apunta que el compromiso afectivo no influye sobre la transferencia interna de conocimiento.

  7. La literatura sobre la industrialización colombiana: Balance y perspectivas

    Directory of Open Access Journals (Sweden)

    Paulo César León Palacios

    2004-01-01

    Full Text Available Este artículo presenta una revisión extensa y analítica de la literatura producida sobre el tema de la industria en Colombia, a través de los ámbitos teórico, metodológico y gnoseológico. Es una referencia necesaria tanto para expertos, en tanto propone un debate global y crítico sobre el tema, como para estudiantes o investigadores que deseen tener una visión panorámica del estado del arte sobre la industrialización sin tener que sumergirse más de lo necesario.

  8. REDUCCION DEL OXIGENO SOBRE CALCOSITA, PIRITA Y GALENA EN MEDIO ALCALINO

    OpenAIRE

    ORTIZ, JUAN; BARBATO, SALVADOR; GAUTIER, JUAN LUIS

    2000-01-01

    La electroreducción del oxígeno fue investigada a pH = 14 sobre electrodos de calcosita, pirita y galena mediante voltamperometría cíclica y por voltamperometría estacionaria usando una celda electroquímica de flujo de doble canal (CEFDC). La superficie de los electrodos fue caracterizada mediante consideraciones termodinámicas y cinéticas. En todos lo casos la reducción del O2 ocurre con formación de iones HO2-. Sobre calcosita la reacción de reducción del O2 (RRO) ocurre sobre una superfici...

  9. The Mercury Laser Advances Laser Technology for Power Generation

    Energy Technology Data Exchange (ETDEWEB)

    Ebbers, C A; Caird, J; Moses, E

    2009-01-21

    The National Ignition Facility (NIF) at Lawrence Livermore Laboratory is on target to demonstrate 'breakeven' - creating as much fusion-energy output as laser-energy input. NIF will compress a tiny sphere of hydrogen isotopes with 1.8 MJ of laser light in a 20-ns pulse, packing the isotopes so tightly that they fuse together, producing helium nuclei and releasing energy in the form of energetic particles. The achievement of breakeven will culminate an enormous effort by thousands of scientists and engineers, not only at Livermore but around the world, during the past several decades. But what about the day after NIF achieves breakeven? NIF is a world-class engineering research facility, but if laser fusion is ever to generate power for civilian consumption, the laser will have to deliver pulses nearly 100,000 times faster than NIF - a rate of perhaps 10 shots per second as opposed to NIF's several shots a day. The Mercury laser (named after the Roman messenger god) is intended to lead the way to a 10-shots-per-second, electrically-efficient, driver laser for commercial laser fusion. While the Mercury laser will generate only a small fraction of the peak power of NIF (1/30,000), Mercury operates at higher average power. The design of Mercury takes full advantage of the technology advances manifest in its behemoth cousin (Table 1). One significant difference is that, unlike the flashlamp-pumped NIF, Mercury is pumped by highly efficient laser diodes. Mercury is a prototype laser capable of scaling in aperture and energy to a NIF-like beamline, with greater electrical efficiency, while still running at a repetition rate 100,000 times greater.

  10. Laser program overview

    International Nuclear Information System (INIS)

    Storm, E.; Coleman, L.W.

    1985-01-01

    The objectives of the Lawrence Livermore National Laboratory Laser Fusion program are to understand and develop the science and technology of inertial confinement fusion (ICF), and to utilize ICF in short- and long-term military applications, and, in the long-term, as a candidate for central-station civilian power generation. In 1984, using the Novette laser system, the authors completed experiments showing the very favorable scaling of laser-plama interactions with short-wavelength laser light. Their Novette experiments have unequivocally shown that short laser wavelength, i.e., less than 1 μm, is required to provide the drive necessary for efficient compression, ignition, and burn of DT fusion fuel. In other experiments with Novette, the authors made the first unambiguous observation of amplified spontaneous emission in the soft x-ray regime. The authors also conducted military applications and weapons physics experiments, which they discuss in detail in the classified volume of our Laser Program Annual Report. In the second thrust, advanced laser studies, they develop and test the concepts, components, and materials for present and future laser systems. Over the years, this has meant providing the technology base and scientific advances necessary to construct and operate a succession of six evermore-powerful laser systems. The latest of these, Nova, a 100-TW/100-kJ-class laser system, was completed in 1984. The Nd:glass laser continues to be the most effective and versatile tool for ICF and weapons physics because of its scalability in energy, the ability to efficiently convert its 1=μm output to shorter wavelengths, its ability to provide flexible, controlled pulse shaping, and its capability to adapt to a variety of irradiation and focusing geometries. For these reasons, many of our advanced laser studies are in areas appropriate to solid state laser technologies

  11. Power balancing of multibeam laser fusion lasers

    International Nuclear Information System (INIS)

    Seka, W.; Morse, S.; Letzring, S.; Kremens, R.; Kessler, T.J.; Jaanimagi, P.; Keck, R.; Verdon, C.; Brown, D.

    1989-01-01

    The success of laser fusion depends to a good degree on the ability to compress the target to very high densities of ≥1000 times liquid DT. To achieve such compressions require that the irradiation nonuniformity must not exceed ∼1% rms over the whole time of the compression, particularly during the early phases of irradiation. The stringent requirements for the irradiation uniformity for laser fusion have been known for quite some time but until recently the energy balance was mistakenly equated to power balance. The authors describe their effort on energy balance and irradiation patterns on the target. They significantly improved the laser performance with respect to overall intensity distributions on target including the implementation of distributed (random) phase plates in each high power beam. However, the slightly varying performance of the third harmonic conversion crystals in the twenty-four beams of their laser system was generally compensated for by appropriately adjusted 1.054μm input laser energy. Computational analysis of the results of the recent high density campaign are shown

  12. Influencia del yeso sobre la velocidad de hidratación del cemento portland

    Directory of Open Access Journals (Sweden)

    Yamaguchi, G.

    1961-12-01

    Full Text Available Not availablePara esclarecer la Influencia del yeso sobre el fraguado y endurecimiento del cemento, los autores estudiaron el grado de hidratación de los cuatro principales minerales del clínker de cemento Portland y el efecto del yeso sobre ellas. Haciendo uso del análisis cuantitativo de rayos X, se determinó la porción no hidratada. Simultáneamente, se determinaron los tiempos de fraguado y las resistencias. Los ensayos se llevaron a cabo sobre tres clínkeres sintéticos de diferentes composiciones y sobre dos clínkeres de cemento Portland comerciales.

  13. Biocavity Lasers

    Energy Technology Data Exchange (ETDEWEB)

    Gourley, P.L.; Gourley, M.F.

    2000-10-05

    Laser technology has advanced dramatically and is an integral part of today's healthcare delivery system. Lasers are used in the laboratory analysis of human blood samples and serve as surgical tools that kill, burn or cut tissue. Recent semiconductor microtechnology has reduced the size o f a laser to the size of a biological cell or even a virus particle. By integrating these ultra small lasers with biological systems, it is possible to create micro-electrical mechanical systems that may revolutionize health care delivery.

  14. An overview of the laser ranging method of space laser altimeter

    Science.gov (United States)

    Zhou, Hui; Chen, Yuwei; Hyyppä, Juha; Li, Song

    2017-11-01

    Space laser altimeter is an active remote sensing instrument to measure topographic map of Earth, Moon and planetary. The space laser altimeter determines the range between the instrument and laser footprint by measuring round trip time of laser pulse. The return pulse reflected from ground surface is gathered by the receiver of space laser altimeter, the pulsewidth and amplitude of which are changeable with the variability of the ground relief. Meantime, several kinds of noise overlapped on the return pulse signal affect its signal-to-noise ratio. To eliminate the influence of these factors that cause range walk and range uncertainty, the reliable laser ranging methods need to be implemented to obtain high-precision range results. Based on typical space laser altimeters in the past few decades, various ranging methods are expounded in detail according to the operational principle of instruments and timing method. By illustrating the concrete procedure of determining time of flight of laser pulse, this overview provides the comparison of the employed technologies in previous and undergoing research programs and prospect innovative technology for space laser altimeters in future.

  15. Novel laterally pumped by prism laser configuration for compact solid-state lasers

    International Nuclear Information System (INIS)

    Dascalu, T; Salamu, G; Sandu, O; Voicu, F; Pavel, N

    2013-01-01

    We propose a new laser configuration in which the pump radiation is coupled into the laser crystal through a prism. The laser medium is square shaped and the prism is attached on one of its lateral sides, near one of the crystal extremities. The diode-laser fiber end is placed close to the prism hypotenuse, the pump radiation is coupled into the laser crystal through the opposite surface of the prism and propagates into the crystal through total internal reflections. This laser geometry is simple to align and permits the realization of compact diode-pumped laser systems, as well as power scaling. A diode-pumped Nd:YAG laser yielding pulses of 2.1 mJ energy under a pump with pulses of 9.9 mJ is demonstrated. The laser slope efficiency is 0.22. Furthermore, this geometry enables one to obtain passively Q-switched lasers with the saturable absorber crystal placed between the resonator high-reflectivity mirror and the laser crystal. A Nd:YAG laser, passively Q-switched by a Cr 4+ :YAG crystal with initial transmission T 0 = 0.90, delivering laser output with a pulsed energy of 93 μJ, a duration of 26 ns and a pump threshold of 1.9 mJ, is realized in order to prove the concept. (letter)

  16. A Laser Technology Test Facility for Laser Inertial Fusion Energy (LIFE)

    International Nuclear Information System (INIS)

    Bayramian, A.J.; Campbell, R.W.; Ebbers, C.A.; Freitas, B.L.; Latkowski, J.; Molander, W.A.; Sutton, S.B.; Telford, S.; Caird, J.A.

    2010-01-01

    A LIFE laser driver needs to be designed and operated which meets the rigorous requirements of the NIF laser system while operating at high average power, and operate for a lifetime of >30 years. Ignition on NIF will serve to demonstrate laser driver functionality, operation of the Mercury laser system at LLNL demonstrates the ability of a diode-pumped solid-state laser to run at high average power, but the operational lifetime >30 yrs remains to be proven. A Laser Technology test Facility (LTF) has been designed to specifically address this issue. The LTF is a 100-Hz diode-pumped solid-state laser system intended for accelerated testing of the diodes, gain media, optics, frequency converters and final optics, providing system statistics for billion shot class tests. These statistics will be utilized for material and technology development as well as economic and reliability models for LIFE laser drivers.

  17. Robot-laser system

    International Nuclear Information System (INIS)

    Akeel, H.A.

    1987-01-01

    A robot-laser system is described for providing a laser beam at a desired location, the system comprising: a laser beam source; a robot including a plurality of movable parts including a hollow robot arm having a central axis along which the laser source directs the laser beam; at least one mirror for reflecting the laser beam from the source to the desired location, the mirror being mounted within the robot arm to move therewith and relative thereto to about a transverse axis that extends angularly to the central axis of the robot arm; and an automatic programmable control system for automatically moving the mirror about the transverse axis relative to and in synchronization with movement of the robot arm to thereby direct the laser beam to the desired location as the arm is moved

  18. Conversaciones sobre el litoral cordillerano

    OpenAIRE

    Browne,Enrique; Browne,Tomás

    2009-01-01

    Dos arquitectos dialogan sobre los Andes desde su propia vivencia. El territorio de Chile se entiende como límite natural entre mar y cordillera, donde suceden apretadamente una serie de eventos particulares: fallas geológicas, cerros que penetran en las ciudades y torrentes que bajan al mar caracterizan y diferencian sus paisajes.

  19. Development of a compact vertical-cavity surface-emitting laser end-pumped actively Q-switched laser for laser-induced breakdown spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Li, Shuo; Chen, Rongzhang; Nelsen, Bryan; Chen, Kevin, E-mail: pec9@pitt.edu [Department of Electrical and Computer Engineering, University of Pittsburgh, Pittsburgh, Pennsylvania 15260 (United States); Liu, Lei; Huang, Xi; Lu, Yongfeng [Department of Electrical and Computer Engineering, University of Nebraska-Lincoln, Lincoln, Nebraska 68588 (United States)

    2016-03-15

    This paper reports the development of a compact and portable actively Q-switched Nd:YAG laser and its applications in laser-induced breakdown spectroscopy (LIBS). The laser was end-pumped by a vertical-cavity surface-emitting laser (VCSEL). The cavity lases at a wavelength of 1064 nm and produced pulses of 16 ns with a maximum pulse energy of 12.9 mJ. The laser exhibits a reliable performance in terms of pulse-to-pulse stability and timing jitter. The LIBS experiments were carried out using this laser on NIST standard alloy samples. Shot-to-shot LIBS signal stability, crater profile, time evolution of emission spectra, plasma electron density and temperature, and limits of detection were studied and reported in this paper. The test results demonstrate that the VCSEL-pumped solid-state laser is an effective and compact laser tool for laser remote sensing applications.

  20. Laser in urology

    International Nuclear Information System (INIS)

    Breisland, H.O.

    1991-01-01

    The neodymium YAG laser is particularly suited for endoscopic urologic surgery because the YAG laser light can be conducted in flexible fibers. Superficial bladder tumours can be treated under local anaesthesia in the outpatient department. The frequency of local recurrences is low, significantly lower than after electrosection or electrocoagulation. Selected cases of T2-muscle invasive bladder tumours can be cured with laser coagulation applied subsequently to transurethral resection. Combined treatment with electrosection and laser coagulation of localized prostatic cancer is a promising method which compares favourably with results obtained by other treatment modalities. Tumours in the upper urinary tract can be laser-treated through ureteroscopes or nephroscopes, but the treatment should be limited to low stage, low grade tumours. Laser is the treatment of choice for intraurethral condylomatas. Laser treatment of penil carcinoma gives excellent cosmetic and functional results and few local recurrences. Laser lithotripsy is a new technique for treatment of ureteric stones and photodynamic laser therapy is a promising tecnique for treatment of carcinoma in situ in the bladder empithelium. However, neither of these techniques are available for clinical use in Norway as yet. 17 refs., 3 figs., 1 tabs

  1. Laser-induced interactions

    International Nuclear Information System (INIS)

    Green, W.R.

    1979-01-01

    This dissertation discusses some of the new ways that lasers can be used to control the energy flow in a medium. Experimental and theoretical considerations of the laser-induced collision are discussed. The laser-induced collision is a process in which a laser is used to selectively transfer energy from a state in one atomic or molecular species to another state in a different species. The first experimental demonstration of this process is described, along with later experiments in which lasers were used to create collisional cross sections as large as 10 - 13 cm 2 . Laser-induced collisions utilizing both a dipole-dipole interaction and dipole-quadrupole interaction have been experimentally demonstrated. The theoretical aspects of other related processes such as laser-induced spin-exchange, collision induced Raman emission, and laser-induced charge transfer are discussed. Experimental systems that could be used to demonstrate these various processes are presented. An experiment which produced an inversion of the resonance line of an ion by optical pumping of the neutral atom is described. This type of scheme has been proposed as a possible method for constructing VUV and x-ray lasers

  2. Comentarios sobre el artículo de Héctor Sauret: “El proyecto Puiggrós de Ley sobre Regulación del ejercicio de la docencia de la Educación Superior, entre viejos y nuevos paradigmas sobre las universidades privadas”

    Directory of Open Access Journals (Sweden)

    Juan Carlos Pugliese

    2013-05-01

    Full Text Available En el número 1 de DEBATE UNIVERSITARIO se debatió los proyectos de ley alternativos y diversas opiniones sobre la modificación del ejercicio de la docencia de la Educación Superior. Entre dichas opiniones se incluyó un artículo del Dr. Sauret : " El proyecto Puiggrós de Ley sobre Regulación del ejercicio de la docencia de la Educación Superior: entre viejos y nuevos paradigmas sobre las universidades privadas”. En referencia a este material (que puede consultarse en http://ppct.caicyt.gov.ar/index.php/debate-universitario/article/view/1606/pdf se desarrolla el siguiente comentario.

  3. Multimegajoule laser project: new compact multipass laser design

    International Nuclear Information System (INIS)

    Holzrichter, J.F.

    1985-01-01

    A simple laser design that has the fewest laser components of all fusion systems that the authors have studied and that packs closely, thus minimizing space requirements is shown. The Advanced Laser Program objectives are determined by the requirements of the subsystems. The requirements consists of the following elements: high damage thresholds on reflectors; AR layers and dichroic coatings; high-efficiency amplifiers; low-cost production of laser glass, pulse power, and optical elements; and special optical elements, such as an effective phase conjugator and isolator. The combination of a compact architecture and lower-cost, higher-performance components can lead to significant reduction in overall system cost

  4. Laser Propulsion - Quo Vadis

    International Nuclear Information System (INIS)

    Bohn, Willy L.

    2008-01-01

    First, an introductory overview of the different types of laser propulsion techniques will be given and illustrated by some historical examples. Second, laser devices available for basic experiments will be reviewed ranging from low power lasers sources to inertial confinement laser facilities. Subsequently, a status of work will show the impasse in which the laser propulsion community is currently engaged. Revisiting the basic relations leads to new avenues in ablative and direct laser propulsion for ground based and space based applications. Hereby, special attention will be devoted to the impact of emerging ultra-short pulse lasers on the coupling coefficient and specific impulse. In particular, laser sources and laser propulsion techniques will be tested in microgravity environment. A novel approach to debris removal will be discussed with respect to the Satellite Laser Ranging (SRL) facilities. Finally, some non technical issues will be raised aimed at the future prospects of laser propulsion in the international community

  5. O pensamento freudiano sobre a intolerância

    OpenAIRE

    Fuks,Betty Bernardo

    2007-01-01

    A partir do conceito psicanalítico de "narcisismo das pequenas diferenças", o artigo tem como objetivos pensar o modo como Freud foi tecendo um pensamento sobre a intolerância e discutir as contribuições da psicanálise à história das teorias sobre a tolerância. A autora perscruta o fenômeno de intolerância à diferença do outro à luz dos trabalhos de Freud que envolvem e atestam sua sensibilidade para com a intolerância racista que atingiu o tempo em que viveu. Desde este trajeto, propõe algum...

  6. Nuevos documentos sobre Rojas Zorrilla y su teatro

    Directory of Open Access Journals (Sweden)

    Madroñal, Abraham

    2007-06-01

    Full Text Available This article contains twelve unpublished documents on Rojas Zorrilla, related to his biography and literary works (comedias and autos sacramentales. The majority are handwritten by the poet himself, and they provide new information relevant to our knowledge of his life and to the understanding of his works.Se publican una docena de documentos inéditos sobre Rojas Zorrilla referidos a su biografía y a algunas comedias y autos. En buena parte dichos documentos son autógrafos del poeta y añaden o matizan informaciones concretas sobre él y sus obras.

  7. Distributed feedback dye laser pumped with copper-vapor laser emission

    Energy Technology Data Exchange (ETDEWEB)

    Mirza, S Yu; Soldatov, A N; Sukhanov, V B

    1983-10-01

    The power-spectrum characteristics of the emission of a distributed feedback dye laser pumped with a copper vapor laser have been studied. Laser action has been observed in five dyes over a tuning range of 530-723 nm with an efficiency of 12.4%. The specfic features of the distributed feedback dye laser operating at pulse repetition rates of 4 kHz are discussed.

  8. Influence of the laser pulse duration on laser-produced plasma properties

    International Nuclear Information System (INIS)

    Drogoff, B Le; Margot, J; Vidal, F; Laville, S; Chaker, M; Sabsabi, M; Johnston, T W; Barthelemy, O

    2004-01-01

    In the framework of laser-induced plasma spectroscopy (LIPS) applications, time-resolved characteristics of laser-produced aluminium plasmas in air at atmospheric pressure are investigated for laser pulse durations ranging from 100 fs to 270 ps. Measurements show that for delays after the laser pulse longer than ∼100 ns, the plasma temperature increases slightly with the laser pulse duration, while the electron density is independent of it. In addition, as the pulse duration increases, the plasma radiation emission lasts longer and the spectral lines arise later from the continuum emission. The time dependence of the continuum emission appears to be similar whatever the duration of the laser pulse is, while the temporal evolution of the line emission seems to be affected mainly by the plasma temperature. Finally, as far as spectrochemical applications (such as LIPS) of laser-produced plasmas are concerned, this study highlights the importance of the choice of appropriate temporal gating parameters for each laser pulse duration

  9. Laser cleaning of pulsed laser deposited rhodium films for fusion diagnostic mirrors

    International Nuclear Information System (INIS)

    Uccello, A.; Maffini, A.; Dellasega, D.; Passoni, M.

    2013-01-01

    Highlights: ► Pulsed laser deposition is exploited to produce Rh films for first mirrors. ► Pulsed laser deposition is exploited to produce tokamak-like C contaminants. ► Rh laser damage threshold has been evaluated for infrared pulses. ► Laser cleaning of C contaminated Rh films gives promising results. -- Abstract: In this paper an experimental investigation on the laser cleaning process of rhodium films, potentially candidates to be used as tokamak first mirrors (FMs), from redeposited carbon contaminants is presented. A relevant issue that lowers mirror's performance during tokamak operations is the redeposition of sputtered material from the first wall on their surface. Among all the possible techniques, laser cleaning, in which a train of laser pulses is launched to the surface that has to be treated, is a method to potentially mitigate this problem. The same laser system (Q-switched Nd:YAG laser with a fundamental wavelength of 1064-nm and 7-ns pulses) has been employed with three aims: (i) production by pulsed laser deposition (PLD) of Rh film mirrors, (ii) production by PLD of C deposits with controlled morphology, and (iii) investigation of the laser cleaning method onto C contaminated Rh samples. The evaluation of Rh films laser damage threshold, as a function of fluence and number of pulses, is discussed. Then, the C/Rh films have been cleaned by the laser beam. The exposed zones have been characterized by visual inspection and scanning electron microscopy (SEM), showing promising results

  10. Attenuation of laser power of a focused Gaussian beam during interaction between a laser and powder in coaxial laser cladding

    International Nuclear Information System (INIS)

    Liu Jichang; Li Lijun; Zhang Yuanzhong; Xie Xiaozhu

    2005-01-01

    The power of a focused laser beam with a Gaussian intensity profile attenuated by powder in coaxial laser cladding is investigated experimentally and theoretically, and its resolution model is developed. With some assumptions, it is concluded that the attenuation of laser power is an exponential function and is determined by the powder feed rate, particle moving speed, spraying angles and waist positions and diameters of the laser beam and powder flow, grain diameter and run of the laser beam through the powder flow. The attenuation of laser power increases with powder feed rate or run of laser beam through the powder flow. In the experiment presented, 300 W laser power from a focused Gaussian beam is attenuated by a coaxial powder flow. The experimental results agree well with the values calculated with the developed model

  11. Conocimientos sobre derechos y deberes en salud en profesionales de medicina y enfermería, Bucaramanga, Colombia: Conocimientos sobre derechos-deberes en salud

    Directory of Open Access Journals (Sweden)

    Ludivia Esther Montaño Villalba

    2013-04-01

    Full Text Available Objetivo: Describir el nivel de conocimientos que profesionales en medicina y enfermería, que laboran en instituciones de salud públicas y privadas de la ciudad de Bucaramanga (Santander-Colombia, tienen sobre derechos y deberes en salud establecidos en la Constitución Política y en el Sistema General de Seguridad Social en Salud, 2010. Método: Estudio descriptivo, exploratorio, transversal. Se seleccionaron aleatoriamente instituciones, servicios y profesionales participantes. Se indagaron los conocimientos en cinco componentes que cobijaron temas sobre derechos y deberes en salud inscritos en la Constitución Política, en el Sistema General de Seguridad Social colombiano y en la jurisprudencia constitucional; igualmente, se indagó sobre el conocimiento de mecanismos jurídicos para acceder al derecho a la salud en el territorio nacional. Se construyeron promedios en términos de porcentaje total y por componente. Resultados: El promedio global de conocimientos fue 57,7 %, el de conocimientos generales sobre Constitución Política 39,4 % y el de conocimientos sobre el SGSSS 55,1 %. Los profesionales que reportaron mayores niveles de conocimientos fueron: hombres, especialistas administrativos, médicos, personas con mayor experiencia laboral y trabajadores del sector privado. Los egresados menores a cinco años obtuvieron menores promedios de conocimientos. Conclusiones: El nivel de conocimientos en derechos y deberes en salud entre los profesionales de medicina y enfermería en Bucaramanga fue deficiente.A pesar de que el conocimiento de estos temas es central en el desempeño de los profesionales del sector salud, se evidencia a partir de estos resultados, carencia de procesos de formación o educación continuada en el tema de derechos. Salud UIS 2013; 45 (1: 15-22

  12. QUESTÕES SOBRE A PENA DE MORTE

    Directory of Open Access Journals (Sweden)

    SOUSA, L.N.

    2015-12-01

    Full Text Available Pelo menos, desde o Código de Hamurabi as punições para atos desviantes tem sido um foco de reflexão. Este trabalho encerra essa reflexão acerca de aspectos em torno do tema pena de morte. Além de feito político contra o crime, também seria um ato com fins vingativos, fundamentado na violação da dignidade humana, o que justifica a necessidade de haver uma rigorosa análise sobre tal questão, visando os argumentos lógicos, baseados na realidade social brasileira. Alguns estudos demonstram que a percepção da classe menos favorecida é que já existe, de certa forma, uma pena de morte informal no Brasil, praticada pela polícia ou grupos de extermínio. No entanto, diversos setores defendem a pena de morte em nome dos direitos humanos. O debate sobre o referido tema não deve limitar-se às questões relacionadas ao desenvolvimento moral individual, antes deve incluir também a análise de fatores históricos, culturais, econômicos, políticos e ideológicos. Este estudo tem como objetivo coletar dados bibliográficos, bem como dados sobre as opiniões que as pessoas em Campos dos Goytacazes têm sobre a pena de morte. A pesquisa feita é de caráter exploratório. Utilizaram-se as metodologias pertinentes a uma pesquisa bibliográfica. Foi realizada com moradores da cidade de Campos dos Goytacazes/RJ, especificamente com 40 jovens e adultos, de gênero masculino e feminino, com idades entre 18 e 48 anos, sendo a maioria mulheres. A coleta de dados foi feita através de questionários fechados, do tipo likert. Cerca de 48% da amostra concorda com a sentença pena de morte. As respostas quanto a não ter opinião formada sobre o assunto foram minoria, somando 20% ao todo, restando 32% de sujeitos que declararam ser contrários. Metade dos sujeitos não concordou que a sentença seria aplicada corretamente no Brasil. A minoria concordou que a lei teria uma aplicabilidade positiva no país. Aproximadamente 43% dos sujeitos pesquisados

  13. Tunable laser applications

    CERN Document Server

    Duarte, FJ

    2008-01-01

    Introduction F. J. Duarte Spectroscopic Applications of Tunable Optical Parametric Oscillators B. J. Orr, R. T. White, and Y. He Solid-State Dye Lasers Costela, I. García-Moreno, and R. Sastre Tunable Lasers Based on Dye-Doped Polymer Gain Media Incorporating Homogeneous Distributions of Functional Nanoparticles F. J. Duarte and R. O. James Broadly Tunable External-Cavity Semiconductor Lasers F. J. Duarte Tunable Fiber Lasers T. M. Shay and F. J. Duarte Fiber Laser Overview and Medical Applications

  14. Greco Laser-matter interaction

    International Nuclear Information System (INIS)

    1986-01-01

    Research program in 1985 at GRECO ILM (Group of Coordinated Research: Interaction Laser Matter) continued with its principal direction in fundamental physics of laser inertial confinement; also researches on X-ray lasers hare been undergone and new high power laser application fields with particle acceleration, material processing and X-ray sources. A six beam laser was operated. Wavelength effects were studied. Atomic physics was deeply stressed as dense medium diagnostics from multicharged ions. Research development in ultra-dense medium was also important X-ray laser research gave outstanding results. New research fields were developed this year: laser acceleration of particles by wave beating or Raman instability; dense laser produced plasma use as X-ray source; material processing by laser shocks [fr

  15. Laser applications in materials processing

    International Nuclear Information System (INIS)

    Ready, J.F.

    1980-01-01

    The seminar focused on laser annealing of semiconductors, laser processing of semiconductor devices and formation of coatings and powders, surface modification with lasers, and specialized laser processing methods. Papers were presented on the theoretical analysis of thermal and mass transport during laser annealing, applications of scanning continuous-wave and pulsed lasers in silicon technology, laser techniques in photovoltaic applications, and the synthesis of ceramic powders from laser-heated gas-phase reactants. Other papers included: reflectance changes of metals during laser irradiation, surface-alloying using high-power continuous lasers, laser growth of silicon ribbon, and commercial laser-shock processes

  16. HF laser

    International Nuclear Information System (INIS)

    Suzuki, Kazuya; Iwasaki, Matae

    1977-01-01

    A review is made of the research and development of HF chemical laser and its related work. Many gaseous compounds are used as laser media successfully; reaction kinetics and technological problems are described. The hybrid chemical laser of HF-CO 2 system and the topics related to the isotope separation are also included. (auth.)

  17. Investigação sobre o desamparo aprendido em humanos

    OpenAIRE

    Mariana Januario Samelo

    2008-01-01

    A literatura sobre o desamparo aprendido utilizando humanos como participantes de pesquisa, tem encontrado dificuldades metodologicas. O presente experimento teve como objetivo geral estabelecer um procedimento que permitisse controle experimental suficiente para verificacao do efeito de uma historia de incontrolabilidade, com e sem feedback de erro, sobre a aprendizagem de uma nova resposta operante em sujeitos humanos. Estudantes universitarios foram divididos em quatro grupos (n=10), deno...

  18. EFECTOS DEL MERCURIO SOBRE ALGUNAS PLANTAS ACUÁTICAS TROPICALES

    OpenAIRE

    Posada, Martha Isabel; Arroyave, María del Pilar

    2006-01-01

    El presente artículo es una descripción de los efectos del mercurio sobre algunas plantas acuáticas tropicales y sobre los ecosistemas donde habitan. Adicionalmente, se recomienda un protocolo para realizar pruebas de toxicidad con la lenteja de agua (Lemna minor) y se presentan los resultados de los preensayos con diferentes concentraciones de sales de mercurio en condiciones de laboratorio. Se encontró que la biodisponibilidad del mercurio depende de factores que facilitan la disolución del...

  19. META-ESTEREOTIPOS SOBRE LOS INDÍGENAS MAPUCHES DE CHILE

    OpenAIRE

    José L. Saiz; María Eugenia Merino; Daniel Quilaqueo

    2009-01-01

    Se examinaron los meta-estereotipos sobre los mapuches chilenos, esto es, la percepción que miembros de este pueblo originario tienen sobre los estereotipos que los chilenos no indígenas les asignan. Se analizaron cinco aspectos de los meta-estereotipos: contenido (atributos), rótulos (etiquetas grupales), pre cisión (congruencia con estereotipos), uniformidad (consenso) y estructura (configuración de atributos y rótulos). Una muestra de 39 adultos mapuches de la Ciudad de Temuco (Chile) resp...

  20. Obtenção de nanocompósitos, nanodiamante sobre fibra de carbono e nanotubo de carbono sobre fibra de carbono

    OpenAIRE

    Leonardo Iusuti de Medeiros

    2009-01-01

    A proposta desta dissertação é a obtenção de dois compósitos nanoestruturados que sejam constituídos um por nanodiamante sobre fibra de carbono e, o outro, por nanotubo de carbono sobre a fibra de carbono. Em ambos os compósitos as fibras de carbono usadas são obtidas com três diferentes índices de grafitização 1000, 1500 e 2000°C. As fibras de carbono apresentam uma grande área superficial devido a sua estrutura. Quando utilizadas como substrato para crescimento de materiais nanoestruturados...

  1. Multibeam Fibre Laser Cutting

    DEFF Research Database (Denmark)

    Olsen, Flemming Ove

    The appearance of the high power high brilliance fibre laser has opened for new possibilities in laser materials processing. In laser cutting this laser has demonstrated high cutting performance compared to the dominating cutting laser, the CO2-laser. However, quality problems in fibre......-laser cutting have until now limited its application in metal cutting. In this paper the first results of proof-of-principle studies applying a new approach (patent pending) for laser cutting with high brightness short wavelength lasers will be presented. In the approach, multi beam patterns are applied...... to control the melt flow out of the cut kerf resulting in improved cut quality in metal cutting. The beam patterns in this study are created by splitting up beams from 2 single mode fibre lasers and combining these beams into a pattern in the cut kerf. The results are obtained with a total of 550 W of single...

  2. Multibeam fiber laser cutting

    DEFF Research Database (Denmark)

    Olsen, Flemming Ove; Hansen, Klaus Schütt; Nielsen, Jakob Skov

    2009-01-01

    The appearance of the high power high brilliance fiber laser has opened for new possibilities in laser materials processing. In laser cutting this laser has demonstrated high cutting performance compared to the dominating Cutting laser, the CO2 laser. However, quality problems in fiber......-laser cutting have until now limited its application to metal cutting. In this paper the first results of proof-of-principle Studies applying a new approach (patent pending) for laser cutting with high brightness and short wavelength lasers will be presented. In the approach, multibeam patterns are applied...... to control the melt flow out of the cut kerf resulting in improved cut quality in metal cutting. The beam patterns in this study are created by splitting up beams from two single mode fiber lasers and combining these beams into a pattern in the cut kerf. The results are obtained with a total of 550 W...

  3. Lasers in periodontics.

    Science.gov (United States)

    Elavarasu, Sugumari; Naveen, Devisree; Thangavelu, Arthiie

    2012-08-01

    Laser is one of the most captivating technologies in dental practice since Theodore Maiman in 1960 invented the ruby laser. Lasers in dentistry have revolutionized several areas of treatment in the last three and a half decades of the 20(th) century. Introduced as an alternative to mechanical cutting device, laser has now become an instrument of choice in many dental applications. Evidence suggests its use in initial periodontal therapy, surgery, and more recently, its utility in salvaging implant opens up a wide range of applications. More research with better designs are a necessity before lasers can become a part of dental armamentarium. This paper gives an insight to laser in periodontics.

  4. Laser-driven ion acceleration with hollow laser beams

    International Nuclear Information System (INIS)

    Brabetz, C.; Kester, O.; Busold, S.; Bagnoud, V.; Cowan, T.; Deppert, O.; Jahn, D.; Roth, M.; Schumacher, D.

    2015-01-01

    The laser-driven acceleration of protons from thin foils irradiated by hollow high-intensity laser beams in the regime of target normal sheath acceleration (TNSA) is reported for the first time. The use of hollow beams aims at reducing the initial emission solid angle of the TNSA source, due to a flattening of the electron sheath at the target rear side. The experiments were conducted at the PHELIX laser facility at the GSI Helmholtzzentrum für Schwerionenforschung GmbH with laser intensities in the range from 10 18  W cm −2 to 10 20  W cm −2 . We observed an average reduction of the half opening angle by (3.07±0.42)° or (13.2±2.0)% when the targets have a thickness between 12 μm and 14 μm. In addition, the highest proton energies were achieved with the hollow laser beam in comparison to the typical Gaussian focal spot

  5. Laser-driven ion acceleration with hollow laser beams

    Energy Technology Data Exchange (ETDEWEB)

    Brabetz, C., E-mail: c.brabetz@gsi.de; Kester, O. [Goethe-Universität Frankfurt am Main, 60323 Frankfurt (Germany); GSI Helmholtzzentrum für Schwerionenforschung GmbH, 64291 Darmstadt (Germany); Busold, S.; Bagnoud, V. [GSI Helmholtzzentrum für Schwerionenforschung GmbH, 64291 Darmstadt (Germany); Helmholtz-Institut Jena, 07743 Jena (Germany); Cowan, T. [Helmholtz-Zentrum Dresden-Rossendorf, 01328 Dresden (Germany); Technische Universität Dresden, 01069 Dresden (Germany); Deppert, O.; Jahn, D.; Roth, M. [Technische Universität Darmstadt, 64277 Darmstadt (Germany); Schumacher, D. [GSI Helmholtzzentrum für Schwerionenforschung GmbH, 64291 Darmstadt (Germany)

    2015-01-15

    The laser-driven acceleration of protons from thin foils irradiated by hollow high-intensity laser beams in the regime of target normal sheath acceleration (TNSA) is reported for the first time. The use of hollow beams aims at reducing the initial emission solid angle of the TNSA source, due to a flattening of the electron sheath at the target rear side. The experiments were conducted at the PHELIX laser facility at the GSI Helmholtzzentrum für Schwerionenforschung GmbH with laser intensities in the range from 10{sup 18} W cm{sup −2} to 10{sup 20} W cm{sup −2}. We observed an average reduction of the half opening angle by (3.07±0.42)° or (13.2±2.0)% when the targets have a thickness between 12 μm and 14 μm. In addition, the highest proton energies were achieved with the hollow laser beam in comparison to the typical Gaussian focal spot.

  6. High-power pulsed lasers

    International Nuclear Information System (INIS)

    Holzrichter, J.F.

    1980-01-01

    The ideas that led to the successful construction and operation of large multibeam fusion lasers at the Lawrence Livermore Laboratory are reviewed. These lasers are based on the use of Nd:glass laser materials. However, most of the concepts are applicable to any laser being designed for fusion experimentation. This report is a summary of lectures given by the author at the 20th Scottish University Summer School in Physics, on Laser Plasma Interaction. This report includes basic concepts of the laser plasma system, a discussion of lasers that are useful for short-pulse, high-power operation, laser design constraints, optical diagnostics, and system organization

  7. Análise clínica do efeito da fotobiomodulação laser (GaAs - 904 nm sobre a disfunção temporomandibular Clinical analysis of the effect of laser photobiomodulation (GaAs - 904 nm on temporomandibular joint dysfunction

    Directory of Open Access Journals (Sweden)

    JC Frare

    2008-02-01

    Full Text Available INTRODUÇÃO: Nos últimos anos, tem sido notado grande interesse no estudo de novas modalidades para o tratamento das disfunções temporomandibulares (DTM. A dor descrita como dor facial, cefaléia ou dor de ouvido, comumente exacerbada pela função da mandíbula, é, em geral, a principal queixa do paciente. A fotobiomodulação laser vem sendo utilizada no tratamento da dor em DTM. OBJETIVO: O objetivo deste estudo foi verificar o nível de dor de pacientes com DTM tratados com fotobiomodulação laser. MATERIAIS E MÉTODOS: Foram estudados 18 pacientes do sexo feminino, com idade média de 27 anos (± 7, com diagnóstico de DTM, os quais foram separados aleatoriamente em dois grupos: Placebo (Controle e Tratado. O Grupo Tratado (n= 10 recebeu atendimento duas vezes por semana, por quatro semanas consecutivas (totalizando oito aplicações. Utilizou-se o laser de GaAs (904 nm, 6 J/cm², 0,38 mW/cm², área do feixe de 0,039 cm², com modo de emissão contínua. Realizou-se a aplicação do laser em quatro pontos pré-auriculares e um em meato acústico externo. O Grupo Placebo (n= 8 foi manipulado como o tratado, porém com o laser desligado. Para análise do nível de dor dos pacientes, empregou-se a Escala Visual Analógica (EVA de dor, antes e após a terapia. Para a análise dos dados, empregou-se o teste t de Student, com nível de significância de 5% (pINTRODUCTION: Over the last few years, there has been great interest in studying new methods for treating temporomandibular joint dysfunction (TMD. Pain, described as facial pain, headache or earache, usually exacerbated by jaw use, is generally the patients' main complaint. Laser photobiomodulation has been used for treating pain in cases of TMD. OBJECTIVE: The aim of this study was to investigate the pain levels in TMD patients treated with laser photobiomodulation. MATERIAL AND METHODS: Eighteen female patients of mean age was 27 years (± 7, with a diagnosis of TMD, were studied

  8. Advanced lasers for fusion

    International Nuclear Information System (INIS)

    Krupke, W.F.; George, E.V.; Haas, R.A.

    1979-01-01

    Laser drive systems' performance requirements for fusion reactors are developed following a review of the principles of inertial confinement fusion and of the technical status of fusion research lasers (Nd:glass; CO 2 , iodine). These requirements are analyzed in the context of energy-storing laser media with respect to laser systems design issues: optical damage and breakdown, medium excitation, parasitics and superfluorescence depumping, energy extraction physics, medium optical quality, and gas flow. Three types of energy-storing laser media of potential utility are identified and singled out for detailed review: (1) Group VI atomic lasers, (2) rare earth solid state hybrid lasers, and (3) rare earth molecular vapor lasers. The use of highly-radiative laser media, particularly the rare-gas monohalide excimers, are discussed in the context of short pulse fusion applications. The concept of backward wave Raman pulse compression is considered as an attractive technique for this purpose. The basic physics and device parameters of these four laser systems are reviewed and conceptual designs for high energy laser systems are presented. Preliminary estimates for systems efficiencies are given. (Auth.)

  9. Only lasers can be used for low level laser therapy.

    Science.gov (United States)

    Moskvin, Sergey Vladimirovich

    2017-12-01

    The question of lasers' exclusivity, as well as the degree of influence of special properties of low-intensity laser illumination (LILI), such as coherence, polarity and monochromaticity, on the effectiveness of low level laser therapy (LLLT) continues to cause arguments. The study analyzes publications from 1973 to 2016, in which laser and conventional light sources are compared, and the following conclusions are drawn. First, there are a lot of publications with incorrect comparison or unfounded statements. Secondly, other sources of light are often meant by LILI without any justification. Thirdly, all studies, in which the comparison is carried out correctly and close parameters of the impact and the model are used, have a firm conclusion that laser light is much more effective. Fourthly, it is uniquely identified that the most important parameter that determines the efficiency of lasers is monochromaticity, i.e., a much narrower spectral width than for all other light sources. Only laser light sources can be used for LLLT! © Author(s) 2017. This article is published with open access by China Medical University.

  10. Laser Research Lab

    Data.gov (United States)

    Federal Laboratory Consortium — The Laser Research lab is thecenter for the development of new laser sources, nonlinear optical materials, frequency conversion processes and laser-based sensors for...

  11. Laser Cutting of Thick Diamond Films Using Low-Power Laser

    Energy Technology Data Exchange (ETDEWEB)

    Park, Y.J.; Baik, Y.J. [Korea Institute of Science and Technology, Seoul (Korea)

    2000-02-01

    Laser cutting of thick diamond films is studied rising a low-power(10 W) copper vapor laser. Due to the existence of the saturation depth in laser cutting, thick diamond films are not easily cut by low-power lasers. In this study, we have adopted a low thermal- conductivity underlayer of alumina and a heating stage (up to 500 deg. C in air) to prevent the laser energy from consuming-out and, in turn, enhance the cutting efficiency. Aspect ratio increases twice from 3.5 to 7 when the alumina underlayer used. Adopting a heating stage also increases aspect ratio and more than 10 is obtained at higher temperatures than 400 deg. C. These results show that thick diamond films can be cut, with low-power lasers, simply by modifying the thermal property of underlayer. (author). 13 refs., 5 figs.

  12. Laser solenoid: an alternate use of lasers in fusion power

    International Nuclear Information System (INIS)

    Rose, P.H.

    1977-01-01

    A unique laser assisted fusion approach is under development at Mathematical Sciences Northwest, Inc. (MSNW). This approach captures one of the most developed aspects of high energy laser technology, the efficient, large, scalable, pulsed electron beam initiated, electric discharge, CO 2 infrared laser. This advanced technology is then combined with the simple geometry of a linear magnetic confinement system. The laser solenoid concept will be described, current work and experimental progress will be discussed, and the technological problems of building such a system will be assessed. Finally a comparison will be made of the technology and economics for the laser solenoid and alternative fusion approaches

  13. Estudo comparativo histológico na prega vocal após incisão com instrumental a frio e com laser de CO2 em modelo animal Comparative histology study of the vocal folds after incision with cold instruments and CO2 laser in an animal model

    Directory of Open Access Journals (Sweden)

    Fernando C. C. Santos

    2003-12-01

    Full Text Available Dentre os vários tipos de laser usados em Medicina, o laser de CO2 é o mais usado na Otorrinolaringologia e Cirurgia de Cabeça e Pescoço. As vantagens de seu uso são a diminuição do sangramento, a diminuição do edema no pós-operatório e a facilidade de acesso ao campo operatório, entre outras. Desde os trabalhos de Jako e Strong em 1972(1,2, quando o laser de CO2 passou a ser usado no tratamento de papilomatose laríngea e de lesões malignas glóticas iniciais, suas indicações têm aumetado, principalmente em lesões benignas, a partir da alta tecnologia desenvolvida dos últimos anos como, por exemplo, a diminuição do microspot e o uso do superpulso, reduzindo conseqüentemente seu efeito térmico sobre os tecidos. MÉTODOS: Neste trabalho foram realizadas incisões com instrumental a frio e com laser de CO2 1 watt de modo contínuo e superpulso, em pregas vocais caninas e observado, através de cortes histológicos corados pelo método de Sirius Red, a quantidade de colágeno depositada sobre as mesmas. RESULTADOS: A quantidade de colágeno das pregas vocais foi maior do que no grupo controle, e estatisticamente maior no grupo de animais submetidos a procedimentos com instrumental a frio do que com laser de CO2. Não houve diferença estatística entre o grupo controle e o grupo submetido a incisões com instrumentos a frio. CONCLUSÃO: A microcirurgia de laringe com o laser de CO2, quando este é usado em baixa potência, com pequeno "microspot" e com superpulso, é um método seguro em relação à deposição de colágeno, quando comparado com instrumentos com lâmina a frio, obedecendo os princípios da fonomicrocirurgia.Among the several types of lasers employed in medicine today, the CO2 is the most widely used in otorhinolaryngology and head and neck surgeries. The advantages of its use are: the reduction in bleeding, reduction in post-operative edema and the easy access to the operation site, among others. Ever since

  14. A pesquisa no ensino, sobre o ensino e sobre a reflexão dos professores sobre seus ensinos The research in teaching, on teaching and on the teachers' reflection about their teaching

    Directory of Open Access Journals (Sweden)

    Anna Maria Pessoa de Carvalho

    2002-07-01

    Full Text Available Este texto busca mostrar o trabalho desenvolvido no LaPEF (Laboratório de Pesquisa e Ensino de Física, no qual professores do ensino fundamental e médio que vêm trabalhando conosco no contexto dos projetos Fapesp/Escola Pública, pesquisadores que fazem seus mestrados e doutorados e professores da Faculdade de Educação da USP desenvolvem pesquisas no ensino, sobre o ensino e sobre a reflexão dos professores sobre seus ensinos, isto é, sobre formação de professores. Essas três modalidades de pesquisa foram se desenvolvendo a partir da seguinte questão: como o ensino que planejamos, com os pressupostos teóricos que escolhemos, baseados em resultados de pesquisas que já realizamos, estão modificando os alunos? Os problemas que dão origem às pesquisas no ensino são percebidos pelos professores durante as aulas nas escolas públicas e depois são debatidos e transformados em questões de investigação, por esse mesmo grupo, em discussões coletivas no LaPEF. As pesquisas sobre o ensino estão sendo elaboradas por mestrandos e doutorandos a fim de verificar algumas variáveis importantes para o desenvolvimento desse ensino. A diferença fundamental entre esses dois tipos de pesquisas não está em quem a faz, mas nos objetivos que pretendem alcançar. As pesquisas sobre a reflexão dos professores sobre o ensino abordam a problemática da formação continuada dos professores. Esse artigo pretende enfocar como esses três níveis de investigações se inter-relacionam, quais as semelhanças e diferenças entre eles, descrevendo principalmente os objetivos de cada um dos grupos e como esses definem diferentes problemas com distintas estruturas de coleta e análise de dados.This text expounds the work carried out at the LaPEF - Laboratory for the Research and Teaching of Physics - where elementary and high school teachers which have been working with us in projects of the FAPESP/Public School program, graduate students, and teachers

  15. Organic solid-state lasers

    CERN Document Server

    Forget, Sébastien

    2013-01-01

    Organic lasers are broadly tunable coherent sources, potentially compact, convenient and manufactured at low-costs. Appeared in the mid 60’s as solid-state alternatives for liquid dye lasers, they recently gained a new dimension after the demonstration of organic semiconductor lasers in the 90's. More recently, new perspectives appeared at the nanoscale, with organic polariton and surface plasmon lasers. After a brief reminder to laser physics, a first chapter exposes what makes organic solid-state organic lasers specific. The laser architectures used in organic lasers are then reviewed, with a state-of-the-art review of the performances of devices with regard to output power, threshold, lifetime, beam quality etc. A survey of the recent trends in the field is given, highlighting the latest developments with a special focus on the challenges remaining for achieving direct electrical pumping of organic semiconductor lasers. A last chapter covers the applications of organic solid-state lasers.

  16. Implementación del servicio de voz sobre IP en redes Linux y redes telefónicas análogas, utilizando software de comunicación sobre Linux

    OpenAIRE

    Campos, Jorge Alberto; Guzmán, Mauricio Orlando; González Jiménez, Francisco Alirio

    2007-01-01

    Implementación del servicio de voz sobre IP en redes Linux y redes telefónicas análogas, utilizando software de comunicación sobre Linux La tecnología de voz sobre protocolos de comunicación TCP/IP (VoIP, Voice over IP) es la que permite la transmisión de la voz a través de redes digitales (LAN WAN, INTERNET, etc) en forma de paquetes de datos, utilizando para ello la infraestructura de intercambio de datos instalada. La telefonía IP es una aplicación inmediata de esta tecnología de forma ...

  17. Quantum well lasers

    CERN Document Server

    Zory, Jr, Peter S; Kelley, Paul

    1993-01-01

    This book provides the information necessary for the reader to achieve a thorough understanding of all aspects of QW lasers - from the basic mechanism of optical gain, through the current technolgoical state of the art, to the future technologies of quantum wires and quantum dots. In view of the growing importance of QW lasers, this book should be read by all those with an active interest in laser science and technology, from the advanced student to the experienced laser scientist.* The first comprehensive book-length treatment of quantum well lasers* Provides a detailed treatment

  18. Lasers in space.

    CSIR Research Space (South Africa)

    Michaelis, MM

    2008-04-01

    Full Text Available cube, laser beam reflectors, placed on the Moon half a century ago. These early achievements will soon be followed by a plethora of experiments involving lasers in low earth orbit (LEO) or at Lagrange points. And not much later, laser communications... will stretch out as far as Mars and beyond. One important low Earth orbit (LEO) application is the removal of space debris by Earth based or LEO relayed lasers as promoted by Phipps et al.3. Another is military communication. The prominent L1 laser space...

  19. Bleaching Dengan Teknologi Laser

    OpenAIRE

    Eliwaty

    2008-01-01

    Penulisan tentang bleaching dengan laser dimaksudkan untuk menambah wawasan serta pengetahuan dari pembaca di bidang kedokteran gigi. Macam-macam laser yang dipergunakan dalam bleaching yaitu argon, CO2 serta dioda laser. Contoh merek produk laser yaitu Blulaze, Dentcure untuk argonlaser, Novapulse untuk C02 serta Opus 5 untuk dioda laser. Laser bleaching hasilnya dapat dicapai dalam satu kunjungan saja, cepat, efisien namun biayanya relatif mahal, dapat menimbulkan burn, sensitivitas se...

  20. Diode-pumped solid state laser. (Part V). ; Short pulse laser oscillation. Handotai laser reiki kotai laser. 5. ; Tan pulse hasshin

    Energy Technology Data Exchange (ETDEWEB)

    Kuwabara, M.; Bando, N. (Asahi Glass Co. Ltd., Tokyo (Japan))

    1991-12-25

    A semiconductor laser (LD) excited solid state laser using an LD as an excited light source is under discussion for its practical applications to measurements, processing, communications, office automation, and medical areas. This paper describes the discussions given on the short pulse transmission using AOQ switching elements in the LD excited solid state laser with a long wave length band (1.3{mu}m), which is expected of its application in the communications and measurements area. Based on a possibility of raising a measurements resolution by making the pluses in the LD excited solid state laser, and experiments were performed using Nd:YLF as a laser host. as a results, it was found that the smaller the effective mode volume V {sub eff},the smaller the pulse width, and that the ratio of number of initial inversion distribution (N{sub i}/N{sub t}), an important parameter to determine pulse widths, can be obtained from the ratio of the LD exciting light to the input power (P{sub in}/P{sub t}). 7 refs., 14 figs., 2 tabs.

  1. Terraplenes sobre suelos colapsables

    OpenAIRE

    Arnedo Gaute, Diego

    2004-01-01

    Esta tesina está motivada por el diseño y construcción del Canal Segarra-Garrigues. El trazado del canal atraviesa varios pequeños valles de fondo llano mediante terraplenes sobre los cuales circula el canal. En estas vaguadas se encuentran suelos limo-arcillosos de baja densidad cuya potencia puede llegar a ser de varios metros. Estos materiales, debido a su estructura abierta, son potencialmente colapsables una vez cargados si experimentan incrementos de humedad. Las deformacion...

  2. Wavelength sweepable laser source

    DEFF Research Database (Denmark)

    2014-01-01

    Wavelength sweepable laser source is disclosed, wherein the laser source is a semiconductor laser source adapted for generating laser light at a lasing wavelength. The laser source comprises a substrate, a first reflector, and a second reflector. The first and second reflector together defines...... and having a rest position, the second reflector and suspension together defining a microelectromechanical MEMS oscillator. The MEMS oscillator has a resonance frequency and is adapted for oscillating the second reflector on either side of the rest position.; The laser source further comprises electrical...... connections adapted for applying an electric field to the MEMS oscillator. Furthermore, a laser source system and a method of use of the laser source are disclosed....

  3. Mathematical modeling of a photovoltaic-laser energy converter for iodine laser radiation

    Science.gov (United States)

    Walker, Gilbert H.; Heinbockel, John H.

    1987-01-01

    Space-based laser power systems will require converters to change laser radiation into electricity. Vertical junction photovoltaic converters are promising devices for this use. A promising laser for the laser power station is the t-C4F9I laser which emits radiation at a wavelength of 1.315 microns. This paper describes the results of mathematical modeling of a photovoltaic-laser energy converter for use with this laser. The material for this photovoltaic converter is Ga(53)In(47)As which has a bandgap energy of 0.94 eV, slightly below the energy of the laser photons (0.943 eV). Results of a study optimizing the converter parameters are presented. Calculated efficiency for a 1000 vertical junction converter is 42.5 percent at a power density of 1 x 10 to the 3d power w/sq cm.

  4. Laser Materials and Laser Spectroscopy - A Satellite Meeting of IQEC '88

    Science.gov (United States)

    Wang, Zhijiang; Zhang, Zhiming

    1989-03-01

    The Table of Contents for the book is as follows: * Laser Materials * Laser Site Spectroscopy of Transition Metal Ions in Glass * Spectroscopy of Chromium Doped Tunable Laser Materials * Spectroscopic Properties of Nd3+ Ions in LaMgAl11O19 Crystal * Spectral Study and 2.938 μm Laser Emission of Er3+ in the Y3Al5O12 Crystal * Raman-infrared Spectra and Radiationless Relaxation of Laser Crystal NdAl3(BO3)4 * A Study on HB and FLN in BaFCl0.5Br0.5:Sm2+ at 77K * Pair-pumped Upconversion Solid State Lasers * CW Upconversion Laser Action in Neodymium and Erbium doped Solids * Ultra-high Sensitive Upconversion Fluorescence of YbF3 Doped with Trace Tm3+ and Er3+ * The Growth and Properties of NYAB and EYAB Multifunctional Crystal * Study on Fluorescence and Laser Light of Er3+ in Glass * Growth and Properties of Single Crystal Fibers for Laser Materials * A Study on the Quality of Sapphire, Ruby and Ti3+ Doped Sapphire Grown by Temperature Gradient Technique (TGT) and Czochralski Technique (CZ) * The Measurement of Output Property of Ti3+ Al2O3 Laser Crystal * An Xα Study of the Laser Crystal MgF2 : V2+ * Q-switched NAB Laser * Miniature YAG Lasers * Study of High Efficiency {LiF}:{F}^-_2 Color Center Crystals * Study on the Formation Conditions and Optical Properties of (F2+)H Color Center in NaCl:OH- Crystals * Novel Spectroscopic Properties of {LiF}:{F}^+_3 - {F}_2 Mixed Color Centers Laser Crystals * Terraced Substrate Visible GaAlAs Semiconductor Lasers with a Large Optical Cavity * The Temperature Dependence of Gain Spectra, Threshold Current and Auger Recombination in InGaAsP-InP Double Heterojunction Laser diode * Time-resolved Photoluminescence and Energy Transfer of Bound Excitons in GaP:N Crystals * Optical Limiting with Semiconductors * A Critical Review of High-efficiency Crystals for Tunable Lasers * Parametric Scattering in β - BaB2O4 Crystal Induced by Picosecond Pulses * Generation of Picosecond Pulses at 193 nm by Frequency Mixing in β - BaB2O4

  5. Ultraviolet laser transverse profile shaping for improving x-ray free electron laser performance

    International Nuclear Information System (INIS)

    Li, S.; Alverson, S.; Bohler, D.; Egger, A.; Fry, A.

    2017-01-01

    The photocathode rf gun is one of the most critical components in x-ray free electron lasers. The drive laser strikes the photocathode surface, which emits electrons with properties that depend on the shape of the drive laser. Most free electron lasers use photocathodes with work function in the ultraviolet, a wavelength where direct laser manipulation becomes challenging. In this paper, we present a novel application of a digital micromirror device (DMD) for the 253 nm drive laser at the Linear Coherent Light Source. Laser profile shaping is accomplished through an iterative algorithm that takes into account shaping error and efficiency. Next, we use laser shaping to control the X-ray laser output via an online optimizer, which shows improvement in FEL pulse energy. Lastly, as a preparation for electron beam shaping, we use the DMD to measure the photocathode quantum efficiency across cathode surface with an averaged laser rms spot size of 59 μm. In conclusion, our experiments demonstrate promising outlook of using DMD to shape ultraviolet lasers for photocathode rf guns with various applications.

  6. Ultraviolet laser transverse profile shaping for improving x-ray free electron laser performance

    Science.gov (United States)

    Li, S.; Alverson, S.; Bohler, D.; Egger, A.; Fry, A.; Gilevich, S.; Huang, Z.; Miahnahri, A.; Ratner, D.; Robinson, J.; Zhou, F.

    2017-08-01

    The photocathode rf gun is one of the most critical components in x-ray free electron lasers. The drive laser strikes the photocathode surface, which emits electrons with properties that depend on the shape of the drive laser. Most free electron lasers use photocathodes with work function in the ultraviolet, a wavelength where direct laser manipulation becomes challenging. In this paper, we present a novel application of a digital micromirror device (DMD) for the 253 nm drive laser at the Linear Coherent Light Source. Laser profile shaping is accomplished through an iterative algorithm that takes into account shaping error and efficiency. Next, we use laser shaping to control the X-ray laser output via an online optimizer, which shows improvement in FEL pulse energy. Lastly, as a preparation for electron beam shaping, we use the DMD to measure the photocathode quantum efficiency across cathode surface with an averaged laser rms spot size of 59 μ m . Our experiments demonstrate promising outlook of using DMD to shape ultraviolet lasers for photocathode rf guns with various applications.

  7. Laser sampling

    International Nuclear Information System (INIS)

    Gorbatenko, A A; Revina, E I

    2015-01-01

    The review is devoted to the major advances in laser sampling. The advantages and drawbacks of the technique are considered. Specific features of combinations of laser sampling with various instrumental analytical methods, primarily inductively coupled plasma mass spectrometry, are discussed. Examples of practical implementation of hybrid methods involving laser sampling as well as corresponding analytical characteristics are presented. The bibliography includes 78 references

  8. Studies on corrosion protection of laser hybrid welded AISI 316 by laser remelting

    DEFF Research Database (Denmark)

    Olsen, Flemming Ove; Ambat, Rajan; Rasmussen, A.J.

    2005-01-01

    laser surface melting on microstructure and corrosion behaviour of AISI 316L welds. Welding and laser treatment parameters were varied. General corrosion behaviour of the weld and laser treated surface was characterised using a gel visualization test. The local electrochemistry of the weld and laser......Unlike in autogenous laser welding, hybrid laser welding of stainless steel could introduce grain boundary carbides due to low cooling rates. Formation of grain boundary carbides leads to reduced corrosion properties. Studies have initially been carried out on hybrid laser welding and subsequent...... treated surface was investigated using a novel micro electrochemical technique with a tip resolution of ~1 mm. Results show that hybrid laser welding of 316L has increased corrosion susceptibility probably as a result of grain boundary carbide formation. However a suitable post laser treatment could...

  9. Conocimientos de los pediatras de Salvador, Brasil, sobre la vacuna antisarampionosa

    Directory of Open Access Journals (Sweden)

    Moreira Luiza A. Cabus

    1997-01-01

    Full Text Available El éxito de las iniciativas internacionales para la erradicación del sarampión depende en gran medida del grado de conocimiento sobre la vacunación. En 1992 se evaluaron mediante un estudio transversal los conocimientos sobre la vacuna antisarampionosa de los pediatras de la ciudad brasileña de Salvador, Bahia. Del total de 506 pediatras residentes en la ciudad, 299 (59% pudieron ser localizados y respondieron a un cuestionario de 15 preguntas en las que se planteaban situaciones hipotéticas sobre indicaciones y contraindicaciones de esta vacuna. El promedio de aciertos fue de 9,3 preguntas de las 15, lo que muestra el poco conocimiento de los pediatras sobre la vacunación antisarampiososa. Situaciones comunes en la práctica pediátrica brasileña -desnutrición, infección de vías respiratorias altas, diarrea y estado prematuro- fueron a menudo erróneamente consideradas como contraindicaciones para la inmunización. Más de la mitad (62% de los pediatras no conocían la vía correcta de administración de la vacuna. Los conocimientos sobre la vacuna no variaron en función del tiempo transcurrido desde la formación universitaria del pediatra o de su trabajo en centros sanitarios de la Secretaría Estatal de Salud. Los profesores universitarios, los pediatras con maestría y los que cursaban estudios de posgrado tuvieron una media de aciertos ligeramente superior a la del resto. Estos resultados indican la necesidad de reforzar la enseñanza sobre la vacunación antisarampionosa en las facultades de medicina y en los programas de formación continuada para pediatras.

  10. Conocimientos de los pediatras de Salvador, Brasil, sobre la vacuna antisarampionosa

    Directory of Open Access Journals (Sweden)

    Luiza A. Cabus Moreira

    1997-12-01

    Full Text Available El éxito de las iniciativas internacionales para la erradicación del sarampión depende en gran medida del grado de conocimiento sobre la vacunación. En 1992 se evaluaron mediante un estudio transversal los conocimientos sobre la vacuna antisarampionosa de los pediatras de la ciudad brasileña de Salvador, Bahia. Del total de 506 pediatras residentes en la ciudad, 299 (59% pudieron ser localizados y respondieron a un cuestionario de 15 preguntas en las que se planteaban situaciones hipotéticas sobre indicaciones y contraindicaciones de esta vacuna. El promedio de aciertos fue de 9,3 preguntas de las 15, lo que muestra el poco conocimiento de los pediatras sobre la vacunación antisarampiososa. Situaciones comunes en la práctica pediátrica brasileña -desnutrición, infección de vías respiratorias altas, diarrea y estado prematuro- fueron a menudo erróneamente consideradas como contraindicaciones para la inmunización. Más de la mitad (62% de los pediatras no conocían la vía correcta de administración de la vacuna. Los conocimientos sobre la vacuna no variaron en función del tiempo transcurrido desde la formación universitaria del pediatra o de su trabajo en centros sanitarios de la Secretaría Estatal de Salud. Los profesores universitarios, los pediatras con maestría y los que cursaban estudios de posgrado tuvieron una media de aciertos ligeramente superior a la del resto. Estos resultados indican la necesidad de reforzar la enseñanza sobre la vacunación antisarampionosa en las facultades de medicina y en los programas de formación continuada para pediatras.

  11. Conocimientos, actitudes y prácticas sobre la prueba de Papanicolaou

    Directory of Open Access Journals (Sweden)

    Fernando Bazán

    2007-03-01

    Full Text Available Objetivos: Determinar los conocimientos, actitudes y prácticas con respecto a la prueba de Papanicolaou (Pap; hallar la asociación entre la edad y grado de instrucción frente a dichas variables y describir las características sobre la práctica periódica del Pap. Diseño: Analítico y transversal. Lugar: Hospital Nacional Docente Madre-Niño ‘San Bartolomé’. Pacientes: Mujeres en edad fértil de consultorios externos. Intervenciones: Cuestionario estructurado, auto-desarrollado, durante noviembre-2005 a enero-2006. Para el análisis estadístico se utilizó: X2, t student, Anova y OR. Principales medidas de resultados: Nivel de conocimientos, actitudes y prácticas en mujeres sobre el Pap, y asociaciones y características sobre su práctica periódica. Resultados: De 501 encuestadas, en 63% se encontró nivel bajo de conocimiento, en 66% una actitud desfavorable y en 71% una práctica incorrecta sobre la prueba de Papanicolaou; se obtuvo un OR = 1,45 (IC = 0,98 a 2,16 entre el nivel de conocimiento y la práctica correcta; la difusión por los medios de comunicación sobre el Pap fue 6,2% y la mayor barrera para no tener una práctica periódica del Pap fue el género masculino del ejecutor (34,2%. Conclusiones: Los niveles de conocimiento, actitudes y prácticas, en nuestra población, son bajos. El mayor nivel de conocimiento no está relacionado con la práctica correcta del Pap. Existe poca difusión sobre el Pap por los medios de comunicación y las limitantes a que las mujeres se tomen el Pap son principalmente psicológicas.

  12. Excimer laser decontamination

    Science.gov (United States)

    Sentis, Marc L.; Delaporte, Philippe C.; Marine, Wladimir; Uteza, Olivier P.

    2000-04-01

    The application of excimer laser ablation process to the decontamination of radioactive surfaces is discussed. This technology is very attractive because it allows to efficiently remove the contaminated particles without secondary waste production. To demonstrate the capability of such technology to efficiently decontaminate large area, we studied and developed a prototype which include a XeCl laser, an optical fiber delivery system and an ablated particles collection cell. The main physical processes taking place during UV laser ablation will be explained. The influence of laser wavelength, pulse duration and absorption coefficient of material will be discussed. Special studies have been performed to understand the processes which limit the transmission of high average power excimer laser through optical fiber, and to determine the laser conditions to optimize the value of this transmission. An in-situ spectroscopic analysis of laser ablation plasma allows the real time control of the decontamination. The results obtained for painting or metallic oxides removal from stainless steel surfaces will be presented.

  13. Efeito da Convecção no Humor Vítreo Sobre o Dano Térmico de um Melonoma de Coroide Durante Teremoterapia Transpupilar a Laser

    OpenAIRE

    Garcia, Olga Pinheira

    2015-01-01

    O estudo da distribuição de temperaturas no olho humano é capaz de fornecer subsídios para tratamentos hipertérmicos e para o cálculo dos danos causados pela exposição à radiação de uma fonte de laser. Um exemplo é a termoterapia transpupilar a laser (TTT), aplicada no tratamento de um melanoma de coroide. Neste trabalho, foi desenvolvido, através do software comercial SolidWorks®, um modelo tridimensional do olho humano portador de um melanoma de coroide, utilizado para simula...

  14. Efficient Ho:YLF laser pumped by a Tm:fiber laser

    CSIR Research Space (South Africa)

    Koen, W

    2013-10-01

    Full Text Available A thulium fiber laser pumped Ho:YLF laser delivering 45.1 W in a near diffraction limited beam when pumped with 84.7 W is demonstrated. The optical-to-optical efficiency of 53 % compares favorably with similar Ho:YAG lasers....

  15. Discussions about the Nature of Science in a Course on the History of Astronomy. (Spanish Title: Discusiones sobre la Naturaleza de la Ciencia en un Curso sobre Historia de la Astronomía.) Discussões sobre a Natureza da Ciência em um Curso sobre a História da Astronomia

    Science.gov (United States)

    Pires de Andrade, Victória Flório; L'Astorina, Bruno

    2010-07-01

    There are an increasing number of researches in science education that affirm the importance of discussions on the "nature of science" in basic education level as well as in teacher training. The history of science applied to education is a way to contextualize epistemological discussions, allowing both the understanding of scientific content and learning about science concepts. We present some reasonably consensual definitions on the nature of science that have been widely discussed by the academic community. We show also some episodes in the history of astronomy which can lead to discussions involving some aspects of the nature of science, and how they can do it. Hay un número creciente de investigaciones en la enseñanza de las ciencias que afirman la importancia de debates sobre la "naturaleza de la ciencia" en la educación básica y formación del profesorado. La historia de la ciencia aplicada a la educación es una manera de contextualizar los debates de la epistemología, lo que permite tanto la comprensión de los contenidos científicos como el aprendizaje de conceptos científicos. En esto trabajo, presentamos algunas definiciones bastante consensuales sobre la naturaleza de la ciencia que han sido ampliamente discutidas por la comunidad académica y mostramos cómo algunos episodios en la historia de la astronomía pueden llevar a discusiones sobre algunos aspectos de la naturaleza de la ciencia. Há um número crescente de pesquisas na área de ensino de ciências que afirmam a importância de discussões sobre a "natureza da ciência" na educação básica e na formação de professores. A história da ciência aplicada ao ensino é uma maneira de contextualizar discussões epistemológicas, permitindo tanto a compreensão de conteúdos científicos quanto o aprendizado de noções sobre as ciências. Neste trabalho apresentamos algumas definições razoavelmente consensuais sobre a natureza da ciência que foram amplamente discutidas pela

  16. Narrativas de professoras sobre o TDAH: um estudo de caso coletivo

    Directory of Open Access Journals (Sweden)

    Lílian Marx Flor Landskron

    Full Text Available O Transtorno de Déficit de Atenção e Hiperatividade (TDAH, considerado o transtorno de desenvolvimento infantil mais diagnosticado na atualidade, apresenta-se como tema freqüente e controverso na sociedade e grande desafio nas escolas. Os professores enfrentam situações que fogem às suas expectativas e buscam organizar o entendimento a partir de discursos discrepantes. Os valores e significados que subjazem as concepções sobre o TDHA se refletem no modo como as pessoas manejam a situação. Este estudo investigou a percepção de professores sobre o TDAH e salientou a complexidade do fenômeno ao abordar a diversidade de influências que o envolve. Utilizando o método da entrevista narrativa, foram analisadas histórias de nove professoras sobre uma experiência com um aluno diagnosticado. Os resultados indicam que a percepção das professoras sobre o transtorno é individualizante, patologizante, e o conhecimento, inconsistente. Os dados sugerem que este tema deve ser debatido em maior profundidade pela sociedade.

  17. Conhecimento de puérperas sobre amamentação exclusiva

    Directory of Open Access Journals (Sweden)

    Nichelle Monique da Silva

    2014-04-01

    Full Text Available Estudo descritivo de abordagem qualitativa cujo objetivo foi identificar o conhecimento das puérperas sobre aleitamento materno exclusivo. Participaram do estudo treze puérperas internadas no Alojamento Conjunto de uma instituição pública na região de Caxias do Sul-RS. Para a coleta dos dados utilizou-se a entrevista semiestruturada. A análise de dados foi realizada através de análise temática, emergindo três categorias: o conhecimento sobre amamentação exclusiva; o processo de amamentação; e as influências das informações recebidas sobre o processo de amamentação. Mesmo recebendo informações de profissionais de saúde no período pré-natal sobre a amamentação, é possível compreender a necessidade de melhorar a comunicação e o acompanhamento das puérperas por estes profissionais, como uma continuidade no cuidado, no período do puerpério imediato, tardio e também no remoto.

  18. Laser Safety Evaluation of the MILES and Mini MILES Laser Emitting Components; TOPICAL

    International Nuclear Information System (INIS)

    AUGUSTONI, ARNOLD L.

    2002-01-01

    Laser safety evaluation and output emission measurements were performed (during October and November 2001) on SNL MILES and Mini MILES laser emitting components. The purpose, to verify that these components, not only meet the Class 1 (eye safe) laser hazard criteria of the CDRH Compliance Guide for Laser Products and 21 CFR 1040 Laser Product Performance Standard; but also meet the more stringent ANSI Std. z136.1-2000 Safe Use of Lasers conditions for Class 1 lasers that govern SNL laser operations. The results of these measurements confirmed that all of the Small Arms Laser Transmitters, as currently set (''as is''), meet the Class 1 criteria. Several of the Mini MILES Small Arms Transmitters did not. These were modified and re-tested and now meet the Class 1 laser hazard criteria. All but one System Controllers (hand held and rifle stock) met class 1 criteria for single trigger pulls and all presented Class 3a laser hazard levels if the trigger is held (continuous emission) for more than 5 seconds on a single point target. All units were Class 3a for ''aided'' viewing. These units were modified and re-tested and now meet the Class 1 hazard criteria for both ''aided'' as well as ''unaided'' viewing. All the Claymore Mine laser emitters tested are laser hazard Class 1 for both ''aided'' as well as ''unaided'' viewing

  19. Laser ablation principles and applications

    CERN Document Server

    1994-01-01

    Laser Ablation provides a broad picture of the current understanding of laser ablation and its many applications, from the views of key contributors to the field. Discussed are in detail the electronic processes in laser ablation of semiconductors and insulators, the post-ionization of laser-desorbed biomolecules, Fourier-transform mass spectroscopy, the interaction of laser radiation with organic polymers, laser ablation and optical surface damage, laser desorption/ablation with laser detection, and laser ablation of superconducting thin films.

  20. Avisos de salud sobre el PFOA y PFOS en el agua potable

    Science.gov (United States)

    La EPA estableció avisos de salud sobre el ácido perfluorooctanoico (PFOA) y el sulfonato de perfluorooctano (PFOS) para proporcionar información a los operadores de sistemas de agua potable y funcionarios estatales, tribales y locales sobre los riesgos de

  1. Últimos trabajos sobre ladrillos huecos y perforados

    Directory of Open Access Journals (Sweden)

    Editorial, Equipo

    1958-10-01

    Full Text Available Not availableEn la Building Research Station se están llevando a cabo, cada día con resultados positivos más alentadores, investigaciones sobre nuevos tipos de ladrillos huecos y perforados. Es de esperar que, en breve, todos estos estudios den lugar a la aparición de unas normas para su empleo en escala industrial y, precisamente ahora, es, en Inglaterra, el momento oportuno, puesto que, actualmente, está celebrando reuniones la Sociedad Cerámica Británica. Lo que se publica en este artículo es un anticipo sobre las tendencias actuales dentro da este campo.

  2. CO2-laser fusion

    International Nuclear Information System (INIS)

    Stark, E.E. Jr.

    1978-01-01

    The basic concept of laser fusion is described, with a set of requirements on the laser system. Systems and applications concepts are presented and discussed. The CO 2 laser's characteristics and advantages for laser fusion are described. Finally, technological issues in the development of CO 2 laser systems for fusion applications are discussed

  3. Laser dynamics of asynchronous rational harmonic mode-locked fiber soliton lasers

    International Nuclear Information System (INIS)

    Jyu, Siao-Shan; Jiang, Guo-Hao; Lai, Yinchieh

    2013-01-01

    Laser dynamics of asynchronous rational harmonic mode-locked (ARHM) fiber soliton lasers are investigated in detail. In particular, based on the unique laser dynamics of asynchronous mode-locking, we have developed a new method for determining the effective active modulation strength in situ for ARHM lasers. By measuring the magnitudes of the slowly oscillating pulse timing position and central frequency, the effective phase modulation strength at the multiplication frequency of rational harmonic mode-locking can be accurately inferred. The method can be a very useful tool for developing ARHM fiber lasers. (paper)

  4. Radiological protection against lasers

    Energy Technology Data Exchange (ETDEWEB)

    Ballereau, P

    1974-04-01

    A brief description of the biological effects of laser beams is followed by a review of the factors involved in eye and skin damage (factors linked with the nature of lasers and those linked with the organ affected) and a discussion of the problems involved in the determination of threshold exposure levels. Preventive measures are recommended, according to the type of laser (high-energy pulse laser, continuous laser, gas laser). No legislation on the subject exists in France or in Europe. Types of lasers marketed, threshold exposure levels for eye and skin, variations of admissible exposure levels according to wavelength, etc. are presented in tabular form. Nomogram for determination of safe distance for direct vision of a laser is included.

  5. Laser-tissue interaction in tattoo removal by q-switched lasers.

    Science.gov (United States)

    Barua, Shyamanta

    2015-01-01

    Q-switched (QS) lasers are widely considered the gold standard for tattoo removal, with excellent clinical results, impressive predictability, and a good safety profile. The generation of giant pulses by the method of Q-switching is responsible for the unique laser-tissue interaction that is seen in tattoo removal by QS lasers. The QS lasers work by impaction and dissolution of the tattoo pigments. Mechanical fragmentation of the tattoo pigments encased in intracellular lamellated organelles followed by their phagocytosis by macrophages is thought to be the major event in the clearance of pigments by QS lasers. A few novel techniques have been tried in recent times to hasten the clearance of tattoo pigments.

  6. Traveling-wave laser-produced-plasma energy source for photoionization laser pumping and lasers incorporating said

    Science.gov (United States)

    Sher, Mark H.; Macklin, John J.; Harris, Stephen E.

    1989-09-26

    A traveling-wave, laser-produced-plasma, energy source used to obtain single-pass gain saturation of a photoionization pumped laser. A cylindrical lens is used to focus a pump laser beam to a long line on a target. Grooves are cut in the target to present a surface near normal to the incident beam and to reduce the area, and hence increase the intensity and efficiency, of plasma formation.

  7. 5W intracavity frequency-doubled green laser for laser projection

    Science.gov (United States)

    Yan, Boxia; Bi, Yong; Li, Shu; Wang, Dongdong; Wang, Dongzhou; Qi, Yan; Fang, Tao

    2014-11-01

    High power green laser has many applications such as high brightness laser projection and large screen laser theater. A compact and high power green-light source has been developed in diode-pumped solid-state laser based on MgO doped periodically poled LiNbO3 (MgO:PPLN). 5W fiber coupled green laser is achieved by dual path Nd:YVO4/MgO:PPLN intra-cacity frequency-doubled. Single green laser maximum power 2.8W at 532nm is obtained by a 5.5W LD pumped, MgO:PPLN dimensions is 5mm(width)×1mm(thickness)×2mm(length), and the optical to optical conversion efficiency is 51%. The second LD series connected with the one LD, the second path green laser is obtained using the same method. Then the second path light overlap with the first path by the reflection mirrors, then couple into the fiber with a focus mirror. Dual of LD, Nd:YVO4, MgO:PPLN are placed on the same heat sink using a TEC cooling, the operating temperature bandwidth is about 12°C and the stablity is 5% in 96h. A 50×50×17mm3 laser module which generated continuous-wave 5 W green light with high efficiency and width temperature range is demonstrated.

  8. Designing of Raman laser

    International Nuclear Information System (INIS)

    Zidan, M. D.; Al-Awad, F.; Alsous, M. B.

    2005-01-01

    In this work, we describe the design of the Raman laser pumped by Frequency doubled Nd-YAG laser (λ=532 nm) to generate new laser wavelengths by shifting the frequency of the Nd-YAG laser to Stokes region (λ 1 =683 nm, λ 2 =953.6 nm, λ 3 =1579.5 nm) and Antistokes region (λ ' 1 =435 nm, λ ' 2 =369.9 nm, λ ' 3=319.8 nm). Laser resonator has been designed to increase the laser gain. It consists of two mirrors, the back mirror transmits the pump laser beam (λ=532 nm) through the Raman tube and reflects all other generated Raman laser lines. Four special front mirrors were made to be used for the four laser lines λ 1 =683 nm, λ 2 =953.6 nm and λ ' 1 = 435 nm, λ ' 2 =369.9 nm. The output energy for the lines υ 1 s, υ 2 s, υ 1 as,υ 2 as was measured. The output energy of the Raman laser was characterized for different H 2 pressure inside the tube. (Author)

  9. Development of Cr,Nd:GSGG laser as a pumping source of Ti:sapphire laser

    International Nuclear Information System (INIS)

    Tamura, Koji; Arisawa, Takashi

    1999-08-01

    Since efficiency of Cr,Nd doped gadolinium scandium gallium garnet (GSGG) laser is in principle higher than that of Nd:YAG laser, it can be a highly efficient pumping source for Ti:sapphire laser. We have made GSGG laser, and measured its oscillation properties. It was two times more efficient than Nd:YAG laser at free running mode operation. At Q-switched mode operation, fundamental output of 50 mJ and second harmonics output of 8 mJ were obtained. The developed laser had appropriate spatial profile, temporal duration, long time stability for solid laser pumping. Ti:sapphire laser oscillation was achieved by the second harmonics of GSGG laser. (author)

  10. Soft x-ray lasers

    International Nuclear Information System (INIS)

    Matthews, D.L.; Rosen, M.D.

    1988-01-01

    One of the elusive dreams of laser physicists has been the development of an x-ray laser. After 25 years of waiting, the x-ray laser has at last entered the scientific scene, although those now in operation are still laboratory prototypes. They produce soft x rays down to about five nanometers. X-ray lasers retain the usual characteristics of their optical counterparts: a very tight beam, spatial and temporal coherence, and extreme brightness. Present x-ray lasers are nearly 100 times brighter that the next most powerful x-ray source in the world: the electron synchrotron. Although Lawrence Livermore National Laboratory (LLNL) is widely known for its hard-x-ray laser program which has potential applications in the Strategic Defense Initiative, the soft x-ray lasers have no direct military applications. These lasers, and the scientific tools that result from their development, may one day have a place in the design and diagnosis of both laser fusion and hard x-ray lasers. The soft x-ray lasers now in operation at the LLNL have shown great promise but are still in the primitive state. Once x-ray lasers become reliable, efficient, and economical, they will have several important applications. Chief among them might be the creation of holograms of microscopic biological structures too small to be investigated with visible light. 5 figs

  11. History and principle of lasers

    International Nuclear Information System (INIS)

    Townes, Ch.H.; Schwob, C.; Julien, J.; Forget, S.; Robert-Philip, I.; Balcou, Ph.

    2010-01-01

    In the first article C.H. Townes, the inventor of the maser, describes the work and ideas that led to the invention of the laser. The second article explains how a laser operate and the third article reviews the main different types of laser: solid lasers, gas lasers, diode lasers and dye lasers

  12. Aspectos biológicos y poblacionales de Nasonovia ribisnigri y Aulacorthum solani sobre lechuga

    Directory of Open Access Journals (Sweden)

    Vasicek Araceli

    2002-01-01

    Full Text Available Se estimó la influencia de los cultivares Criolla Blanca, Cuatro Estaciones y Gallega, sobre la biología y los parámetros poblacionales de Nasonovia ribisnigri y Aulacorthum solani (Homoptera: Aphidoidea a 10±1ºC y HR de 90%. Los períodos ninfal, pre-reproductivo y post-reproductivo de N. ribisnigri fueron más largos sobre Cuatro Estaciones, no así el reproductivo. En A. solani el período ninfal fue más largo sobre Criolla Blanca y Cuatro Estaciones resultando el reproductivo mayor sobre Cuatro Estaciones. Las tasas intrínsecas de crecimiento natural (r m de N. ribisnigri y A. solani fueron mayores sobre Criolla Blanca y Gallega, respectivamente. De acuerdo a la especie predominante convendría utilizar Cuatro Estaciones para N. ribisnigri y Criolla Blanca para A. solani, en épocas frías.

  13. Laser Safety and Hazard Analysis for the Trailer (B70) Based AURA Laser System

    International Nuclear Information System (INIS)

    AUGUSTONI, ARNOLD L.

    2003-01-01

    A laser safety and hazard analysis was performed for the AURA laser system based on the 2000 version of the American National Standards Institute's (ANSI) Standard Z136.1, for ''Safe Use of Lasers'' and the 2000 version of the ANSI Standard Z136.6, for ''Safe Use of Lasers Outdoors''. The trailer based AURA laser system is a mobile platform, which is used to perform laser interaction experiments and tests at various national test sites. The trailer (B70) based AURA laser system is generally operated on the United State Air Force Starfire Optical Range (SOR) at Kirtland Air Force Base (KAFB), New Mexico. The laser is used to perform laser interaction testing inside the laser trailer as well as outside the trailer at target sites located at various distances from the exit telescope. In order to protect personnel, who work inside the Nominal Hazard Zone (NHZ), from hazardous laser emission exposures it was necessary to determine the Maximum Permissible Exposure (MPE) for each laser wavelength (wavelength bands) and calculate the appropriate minimum Optical Density (OD min ) of the laser safety eyewear used by authorized personnel and the Nominal Ocular Hazard Distance (NOHD) to protect unauthorized personnel who may have violated the boundaries of the control area and enter into the laser's NHZ

  14. Contexto y pensamiento de Charles Taylor sobre el consenso

    Directory of Open Access Journals (Sweden)

    Doris Elena Ospina Muñoz

    2017-01-01

    Full Text Available El artículo sostiene que el consenso no es un tema de primer orden en la filosofía política de Charles Taylor, pero una lectura orientada al problema puede ofrecer los elementos para establecer una teoría sobre dicha noción e identificar los argumentos para su justificación. Además, se enfatiza en el contexto de discusión que permite introducir la filosofía de Taylor como un modo de pensar sobre el consenso, alternativo al constructivismo.

  15. Creencias sobre series de ficción televisiva: el caso de Velvet

    OpenAIRE

    Cristina Etayo Pérez

    2015-01-01

    Las series de televisión son un género de ficción muy atractivo tanto para los espectadores como para las cadenas que las emiten. Dados sus altos costes de producción, deben atraer al público desde el primer momento. Hay estudios sobre los factores que determinan el éxito de una película de cine pero se ha realizado escasa investigación sobre estos factores en series de televisión. En este trabajo se analizan las creencias de los espectadores sobre un conjunto de factores objetivos de la seri...

  16. Entre negación y reconocimiento. Estudios sobre “homosexualidad” en Colombia

    Directory of Open Access Journals (Sweden)

    José Fernando Serrano A.

    1997-04-01

    Full Text Available A Ebel Botero, pionero de los estudios sobre homosexualidad en Colombia¿Qué se ha escrito en Colombia sobre la “homosexualidad”? ¿Existen estudios desde las ciencias sociales y humanas sobre las personas “homosexuales” en el país? Con este par de preguntas el autor presenta un recorrido inicial por algunos textos de autores colombianos al respecto y señala la necesidad de abordar la construcción de conocimiento especializado que ahonde en la comprensión de las diversas formas en que se expresan las sexualidades.

  17. On-Chip Laser-Power Delivery System for Dielectric Laser Accelerators

    Science.gov (United States)

    Hughes, Tyler W.; Tan, Si; Zhao, Zhexin; Sapra, Neil V.; Leedle, Kenneth J.; Deng, Huiyang; Miao, Yu; Black, Dylan S.; Solgaard, Olav; Harris, James S.; Vuckovic, Jelena; Byer, Robert L.; Fan, Shanhui; England, R. Joel; Lee, Yun Jo; Qi, Minghao

    2018-05-01

    We propose an on-chip optical-power delivery system for dielectric laser accelerators based on a fractal "tree-network" dielectric waveguide geometry. This system replaces experimentally demanding free-space manipulations of the driving laser beam with chip-integrated techniques based on precise nanofabrication, enabling access to orders-of-magnitude increases in the interaction length and total energy gain for these miniature accelerators. Based on computational modeling, in the relativistic regime, our laser delivery system is estimated to provide 21 keV of energy gain over an acceleration length of 192 μ m with a single laser input, corresponding to a 108-MV/m acceleration gradient. The system may achieve 1 MeV of energy gain over a distance of less than 1 cm by sequentially illuminating 49 identical structures. These findings are verified by detailed numerical simulation and modeling of the subcomponents, and we provide a discussion of the main constraints, challenges, and relevant parameters with regard to on-chip laser coupling for dielectric laser accelerators.

  18. Laser therapy for cancer

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/patientinstructions/000905.htm Laser therapy for cancer To use the sharing features ... Lasers are also used on the skin. How Laser Therapy is Used Laser therapy can be used ...

  19. Lasers in Cancer Treatment

    Science.gov (United States)

    ... the advantages of laser therapy? What are the disadvantages of laser therapy? What does the future hold ... therapy is appropriate for them. What are the disadvantages of laser therapy? Laser therapy also has several ...

  20. Laser therapy (image)

    Science.gov (United States)

    A laser is used for many medical purposes. Because the laser beam is so small and precise, it enables ... without injuring surrounding tissue. Some uses of the laser are retinal surgery, excision of lesions, and cauterization ...

  1. A comparative study of the effect of low laser radiation on mast cells in inflammatory fibrous hyperplasia colored and not colored by the toluidine blue; Estudo comparativo do efeito da radiacao laser em baixa intensidade sobre mastocitos de hiperplasias fibrosas inflamatorias coradas e nao coradas por azul de toluidina

    Energy Technology Data Exchange (ETDEWEB)

    Sawazaki, Iris

    2001-07-01

    THIS STUDY SHOWS A COMPARATIVE ANALYSIS OF THE EFFECTS OF THE LASER RADIATION IN LOW INTENSITY ON THE MAST CELL DEGRANULATION IN INFLAMMATORY FIBROUS HYPERPLASIA WHEN THEY ARE COLORED OR NOT BY THE TOLUIDINE BLUE. THE DYE WAS USED IN ORDER TO INCREASE THE ABSORPTION OF THE LASER LIGHT BY THE TISSUE. THE INJURE WAS DIVIDED IN THREE EQUAL PARTS, AND EACH PART RECEIVED A DIFFERENT KIND OF TREATMENT. ONE OF THEM WAS REMOVED TO BE THE CONTROL, THE SECOND PART WAS LASER TREATED AND THEN IMMEDIATELY REMOVED AND THE LAST ONE, AFTER BEING SUPERFICIALLY COLORED, WAS LASER TREATED AND THEN IMMEDIATELY REMOVED . THE ORDER OF THE STAGES WAS RANDOMLY CHANGED , THEN THE TIME BETWEEN THE STAGES WOULD NOT INTERFERE IN THE STATISTICAL ANALYSIS OF THE MAST CELL DEGRANULATION RATES. IT WAS FOUND THAT THE MAST CELL DEGRANULATION RATES WERE 49% FOR THE CONTROL GROUP, 87% FOR THE LASER GROUP AND 88% FOR THE COLORED/LASER GROUP. THERE WAS NO SIGNIFICANT STATISTICAL DIFFERENCES BETWEEN THE GROUP LASER TREATED AND THE ONE COLORED/LASER TREATED. HOWEVER, THERE WAS A SIGNIFICANT DIFFERENCE BETWEEN THE CONTROL AND THE TREATED GROUP (PS {<=} 0,01). (AUTHOR)

  2. Tunable laser optics

    CERN Document Server

    Duarte, FJ

    2015-01-01

    This Second Edition of a bestselling book describes the optics and optical principles needed to build lasers. It also highlights the optics instrumentation necessary to characterize laser emissions and focuses on laser-based optical instrumentation. The book emphasizes practical and utilitarian aspects of relevant optics including the essential theory. This revised, expanded, and improved edition contains new material on tunable lasers and discusses relevant topics in quantum optics.

  3. Laser cutting system

    Science.gov (United States)

    Dougherty, Thomas J

    2015-03-03

    A workpiece cutting apparatus includes a laser source, a first suction system, and a first finger configured to guide a workpiece as it moves past the laser source. The first finger includes a first end provided adjacent a point where a laser from the laser source cuts the workpiece, and the first end of the first finger includes an aperture in fluid communication with the first suction system.

  4. Laser cooling of solids

    CERN Document Server

    Petrushkin, S V

    2009-01-01

    Laser cooling is an important emerging technology in such areas as the cooling of semiconductors. The book examines and suggests solutions for a range of problems in the development of miniature solid-state laser refrigerators, self-cooling solid-state lasers and optical echo-processors. It begins by looking at the basic theory of laser cooling before considering such topics as self-cooling of active elements of solid-state lasers, laser cooling of solid-state information media of optical echo-processors, and problems of cooling solid-state quantum processors. Laser Cooling of Solids is an important contribution to the development of compact laser-powered cryogenic refrigerators, both for the academic community and those in the microelectronics and other industries. Provides a timely review of this promising field of research and discusses the fundamentals and theory of laser cooling Particular attention is given to the physics of cooling processes and the mathematical description of these processes Reviews p...

  5. BENVENISTE, LACAN E O ESTRUTURALISMO: SOBRE O SENTIDO ANTITÉTICO DAS PALAVRAS PRIMITIVAS

    Directory of Open Access Journals (Sweden)

    Bruno Focas Vieira MACHADO

    2015-06-01

    Full Text Available Este artigo pretende evidenciar determinados aspectos da leitura estruturalista de Benveniste sobre as fundamentações linguísticas encontradas em Freud, mais propriamente em seu texto “Sobre o sentido antitético das palavras primitivas”. Coloca-se em diálogo o artigo de Benveniste intitulado “Observações sobre a função da linguagem na descoberta freudiana” com as teorizações linguísticas apresentadas por Freud em seu texto supracitado. Busca-se, assim, uma interface entre os estudos linguísticos e psicanalíticos, problematizando a noção de língua primitiva trazida por Freud e confrontando-a com pressupostos da Linguística Estrutural defendida por Benveniste. A abordagem tecida é eminentemente teórica, buscando iluminar os pontos de divergência entre a concepção de linguagem na perspectiva de Freud e de Benveniste. Para atingir esse objetivo, buscou-se o estudo sobre a negação desenvolvida por Freud em seu texto “A negativa” e colocou-a em relação com as observações de Benveniste sobre o linguista Carl Abel, forte influência linguística no pensamento freudiano desenvolvido no texto “Sobre o sentido antitético das palavras primitivas”. Como conclusão, torna-se possível compreender que, se a língua é uma estrutura e um sistema, ela possui um caráter universal e a-histórico, o que contesta a tese freudiana sobre a existência de línguas primitivas.

  6. Estudo de propriedades estruturais e opticas de multicamadas epitaxiais emissoras de luz baseadas em InGaN/GaN

    Science.gov (United States)

    Pereira, Sergio Manuel de Sousa

    Esta tese apresenta os resultados de uma investigacao experimental em filmes epitaxiais emissores de luz baseados em InxGa1-xN. O InxGa1-xN e uma liga semicondutora ternaria do grupo III-N muito utilizada como camada activa numa gama de dispositivos optoelectronicos em desenvolvimento, incluindo diodos emissores de luz (LEDs) e diodos laser (LDs), para operacao na regiao do visivel e ultravioleta do espectro electromagnetico. Neste estudo, caracterizam-se as propriedade opticas e estruturais de camadas simples e pocos quânticos multiplos (Multiple Quantum Wells, MQWs) de InxGa1-xN/GaN, com enfase nas suas propriedades fisicas fundamentais. O objectivo central do trabalho prende-se com a compreensao mais profunda dos processos fisicos que estao por tras das suas propriedades opticas, preenchendo o fosso existente entre aplicacoes tecnologicas e o conhecimento cientifico. Nomeadamente, a tese aborda os problemas da medicao da fraccao de InN (x) em multicamadas ultrafinas sujeitas a tensoes, a influencia da composicao e das tensoes microscopicas nas propriedades opticas e estruturais. A questao relativa a segregacao de fases em multicamadas de InxGa1-xN/GaN e tambem discutida a luz dos resultados obtidos. A metodologia seguida assenta na integracao de resultados obtidos por tecnicas complementares atraves de uma analise sistematica e multidisciplinar. Esta abordagem passa pela combinacao de: 1) Crescimento de amostras por deposicao epitaxial em fase de vapor organometalico (MOVPE) com caracteristicas especificas de forma a tentar isolar parâmetros estruturais, tais como espessura e composicao; 2) Caracterizacao nanoestrutural por microscopia de forca atomica (AFM), microscopica electronica de varrimento (SEM), difraccao de raios-X e retro-dispersao de Rutherford (RBS); 3) Caracterizacao optica a escalas complementares por: espectroscopia de absorcao optica (OA), fotoluminescencia (PL), catodoluminescencia (CL) e microscopia confocal (CM) com analise espectral. Com

  7. Laser physics and a review of laser applications in dentistry for children.

    Science.gov (United States)

    Martens, L C

    2011-04-01

    The aim of this introduction to this special laser issue is to describe some basic laser physics and to delineate the potential of laser-assisted dentistry in children. A brief review of the available laser literature was performed within the scope of paediatric dentistry. Attention was paid to soft tissue surgery, caries prevention and diagnosis, cavity preparation, comfort of the patient, effect on bacteria, long term pulpal vitality, endodontics in primary teeth, dental traumatology and low level laser therapy. Although there is a lack of sufficient evidence taking into account the highest standards for evidence-based dentistry, it is clear that laser application in a number of different aetiologies for soft tissue surgery in children has proven to be successful. Lasers provide a refined diagnosis of caries combined with the appropriate preventive adhesive dentistry after cavity preparation. This will further lead to a new wave of micro-dentistry based on 'filling without drilling'. It has become clear from a review of the literature that specific laser applications in paediatric dentistry have gained increasing importance. It can be concluded that children should be considered as amongst the first patients for receiving laser-assisted dentistry.

  8. Femtosecond laser inscribed cladding waveguide lasers in Nd:LiYF4 crystals

    Science.gov (United States)

    Li, Shi-Ling; Huang, Ze-Ping; Ye, Yong-Kai; Wang, Hai-Long

    2018-06-01

    Depressed circular cladding, buried waveguides were fabricated in Nd:LiYF4 crystals with an ultrafast Yb-doped fiber master-oscillator power amplifier laser. Waveguides were optimized by varying the laser writing conditions, such as pulse energy, focus depth, femtosecond laser polarization and scanning velocity. Under optical pump at 799 nm, cladding waveguides showed continuous-wave laser oscillation at 1047 nm. Single- and multi-transverse modes waveguide laser were realized by varying the waveguide diameter. The maximum output power in the 40 μm waveguide is ∼195 mW with a slope efficiency of 34.3%. The waveguide lasers with hexagonal and cubic cladding geometry were also realized.

  9. Laserterapia de baixa intensidade na expressão de colágeno após lesão muscular cirúrgica Low-level laser therapy in the expression of collagen after muscular surgical injury

    Directory of Open Access Journals (Sweden)

    Flávia Fonseca Moreira

    2011-03-01

    Full Text Available A laserterapia é um procedimento utilizado em larga escala nas lesões musculoesqueléticas, devido as suas diversas propriedades, antiinflamatórias, cicatrizantes entre outras. Além disso, há tipos distintos de aparelhos de laser. Mesmo com os diversos modelos experimentais existentes na literatura, não há um consenso sobre a faixa de utilização, bem como o tipo de laser que promove melhor reparo no tecido muscular. Este estudo visa analisar os efeitos da laserterapia de baixa intensidade na expressão de colágeno após lesão muscular. Camundongos Swiss albinos (n=18 foram submetidos à lesão muscular cirúrgica e divididos em dois grupos, controle (C e teste (T. Os animais foram submetidos a uma irradiação diária de 5 J/cm² pelos lasers AsGaAl 830 nm e AsGa 904 nm e, em diferentes tempos de sacrifício (7 e 14 dias. Os resultados não demonstraram diferença estatística significativa na expressão de colágeno em ambos os grupos analisados. Contudo, os dados apontam que a dose de 5 J/cm² do laser AsGa 904 nm promoveu maior deposição de fibras colágenas após 14 dias de tratamento, sugerindo que a terapia seja efetiva na síntese de colágeno. Outros estudos experimentais, em humanos, devem ser propostos para maiores inferências sobre os resultados do laser no tratamento da lesão muscular.The laser therapy is a procedure utilized at long scale in the musculoskeletal injuries, due its anti-inflammatory and reparatory proprieties and others. Besides, there are differents types of laser equipments. Despites with the many experimental models at literature, there is no consensus about the range of application as well as the type of laser that promove of the best repair in muscular tissue. The aim of this study is to analyze the effects of the low level laser therapy in the expression of collagen after muscular injury. Mice Swiss albinos (n=18 were subjected to the muscular surgical injury and separated in two groups, control (C

  10. Reflexiones sobre la anorexia Reflexões sobre a anorexia Reflections about anorexy

    Directory of Open Access Journals (Sweden)

    Andrea Ferrero

    2009-03-01

    Full Text Available El propósito de este artículo es presentar algunas reflexiones sobre el trastorno anoréxico, algunas posibles explicaciones sobre el mismo, y proponer una respuesta posible desde la perspectiva psicoanalítica. Este estudio plantea el sufrimiento del sujeto como la manifestación de una relación inconsciente entre las ecuaciones afectivas y el entramado social de la persona. Se discute la particular relación que se establece entre la necesidad, la demanda y el deseo en este tipo de trastornos, y cómo el síntoma anoréxico se plantea como estrategia enferma de defensa del deseo. Se puede considerar el impacto que la presión de la cultura tiene en la manutención del síntoma anoréxico, dada la importancia del ideal de delgadez y belleza, también asociados con la obtención de mayor éxito y felicidad. Finalmente, se plantea el valor del análisis de la personalidad en relación a aspectos sociales para la consideración del trastorno anoréxico, el cual debe ser comprendido singularmente, más allá de sus manifestaciones y de la posible limitación a la estructura de la histeria.O objetivo deste artigo é apresentar algumas reflexões sobre o processo de adoecimento da anorexia e algumas possíveis explicações sobre esse processo, bem como propor uma possível resposta a partir da perspectiva psicanalítica. Este estudo estabelece o sofrimento do sujeito como a manifestação da relação inconsciente entre as equações afetivas e a trama social da pessoa. Procura-se discutir a peculiar relação entre necessidade, demanda e desejo neste tipo de transtorno, e como a anorexia é uma estratégia patológica de defesa do desejo. Pôde-se observar a influência da pressão da cultura na manutenção da anorexia, justificada pelo ideal de magreza e de beleza, que também são associadas com a possibilidade de obter maior êxito e felicidade. Por último, considera-se o valor da análise da personalidade em relação aos aspectos sociais

  11. Advanced Laser Architecture for Two-Step Laser Tandem Mass Spectrometer

    Science.gov (United States)

    Fahey, Molly E.; Li, Steven X.; Yu, Anthony W.; Getty, Stephanie A.

    2016-01-01

    Future astrobiology missions will focus on planets with significant astrochemical or potential astrobiological features, such as small, primitive bodies and the icy moons of the outer planets that may host diverse organic compounds. These missions require advanced instrument techniques to fully and unambiguously characterize the composition of surface and dust materials. Laser desorptionionization mass spectrometry (LDMS) is an emerging instrument technology for in situ mass analysis of non-volatile sample composition. A recent Goddard LDMS advancement is the two-step laser tandem mass spectrometer (L2MS) instrument to address the need for future flight instrumentation to deconvolve complex organic signatures. The L2MS prototype uses a resonance enhanced multi-photon laser ionization mechanism to selectively detect aromatic species from a more complex sample. By neglecting the aliphatic and inorganic mineral signatures in the two-step mass spectrum, the L2MS approach can provide both mass assignments and clues to structural information for an in situ investigation of non-volatile sample composition. In this paper we will describe our development effort on a new laser architecture that is based on the previously flown Lunar Orbiter Laser Altimeter (LOLA) laser transmitter for the L2MS instrument. The laser provides two discrete midinfrared wavelengths (2.8 m and 3.4 m) using monolithic optical parametric oscillators and ultraviolet (UV) wavelength (266 nm) on a single laser bench with a straightforward development path toward flight readiness.

  12. Laser in operative dentistry

    Directory of Open Access Journals (Sweden)

    E. Yasini

    1994-06-01

    Full Text Available Today laser has a lot of usage in medicine and dentistry. In the field of dentistry, laser is used in soft tissue surgery, sterilization of canals (in root canal therapy and in restorative dentistry laser is used for cavity preparation, caries removal, sealing the grooves (in preventive dentistry, etching enamel and dentin, composite polymerization and removal of tooth sensitivity. The use of Co2 lasers and Nd: YAG for cavity preparation, due to creating high heat causes darkness and cracks around the region of laser radiation. Also due to high temperature of these lasers, pulp damage is inevitable. So today, by using the Excimer laser especially the argon floride type with a wavelength of 193 nm, the problem of heat stress have been solved, but the use of lasers in dentistry, especially for cavity preparation needs more researches and evaluations.

  13. Flexible Laser Metal Cutting

    DEFF Research Database (Denmark)

    Villumsen, Sigurd; Jørgensen, Steffen Nordahl; Kristiansen, Morten

    2014-01-01

    This paper describes a new flexible and fast approach to laser cutting called ROBOCUT. Combined with CAD/CAM technology, laser cutting of metal provides the flexibility to perform one-of-a-kind cutting and hereby realises mass production of customised products. Today’s laser cutting techniques...... possess, despite their wide use in industry, limitations regarding speed and geometry. Research trends point towards remote laser cutting techniques which can improve speed and geometrical freedom and hereby the competitiveness of laser cutting compared to fixed-tool-based cutting technology...... such as punching. This paper presents the concepts and preliminary test results of the ROBOCUT laser cutting technology, a technology which potentially can revolutionise laser cutting....

  14. Measurement of the emission spectrum of a semiconductor laser using laser-feedback interferometry.

    Science.gov (United States)

    Keeley, James; Freeman, Joshua; Bertling, Karl; Lim, Yah L; Mohandas, Reshma A; Taimre, Thomas; Li, Lianhe H; Indjin, Dragan; Rakić, Aleksandar D; Linfield, Edmund H; Davies, A Giles; Dean, Paul

    2017-08-03

    The effects of optical feedback (OF) in lasers have been observed since the early days of laser development. While OF can result in undesirable and unpredictable operation in laser systems, it can also cause measurable perturbations to the operating parameters, which can be harnessed for metrological purposes. In this work we exploit this 'self-mixing' effect to infer the emission spectrum of a semiconductor laser using a laser-feedback interferometer, in which the terminal voltage of the laser is used to coherently sample the reinjected field. We demonstrate this approach using a terahertz frequency quantum cascade laser operating in both single- and multiple-longitudinal mode regimes, and are able to resolve spectral features not reliably resolved using traditional Fourier transform spectroscopy. We also investigate quantitatively the frequency perturbation of individual laser modes under OF, and find excellent agreement with predictions of the excess phase equation central to the theory of lasers under OF.

  15. Lasers in chemical processing

    International Nuclear Information System (INIS)

    Davis, J.I.

    1982-01-01

    The high cost of laser energy is the crucial issue in any potential laser-processing application. It is expensive relative to other forms of energy and to most bulk chemicals. We show those factors that have previously frustrated attempts to find commercially viable laser-induced processes for the production of materials. Having identified the general criteria to be satisfied by an economically successful laser process and shown how these imply the laser-system requirements, we present a status report on the uranium laser isotope separation (LIS) program at the Lawrence Livermore National Laboratory

  16. Laser power supply

    International Nuclear Information System (INIS)

    Bernstein, D.

    1975-01-01

    The laser power supply includes a regulator which has a high voltage control loop based on a linear approximation of a laser tube negative resistance characteristic. The regulator has independent control loops for laser current and power supply high voltage

  17. PROTOCOLO DE KYOTO: DEBATE SOBRE AMBIENTE Y DESARROLLO EN LAS DISCUSIONES SOBRE CAMBIO CLIMÁTICO

    Directory of Open Access Journals (Sweden)

    Rodríguez S. Liliana

    2008-07-01

    Full Text Available El comportamiento climático del planeta y sus consecuencias han propiciado debates sobre los modelos de desarrollo de los países responsables del deterioro acelerado del ambiente y de los fenómenos naturales por estos días recurrentes. Sin embargo, países como Estados Unidos, luego de firmar compromisos como la Convención sobre Cambio Climático, rehúsan adquirir las obligaciones del Protocolo de Kyoto, por temor a sufrir deterioro en sus economías. En este escenario, donde la nación responsable de la emisión de aproximadamente 36% de los gases efecto invernadero resultado de la acción humana en el planeta no se compromete a adoptar políticas restrictivas tendientes a hacer sus modelos de producción más amigables con la naturaleza a pesar de que dichas medidas empiezan a ser impuestas a otras naciones como condicionantes en las negociaciones comerciales internacionales, parece ser que la adopción del Protocolo de Kyoto para países en desarrollo como Colombia no es del todo benéfica.

  18. Lasers in endodontics: an overview

    Science.gov (United States)

    Frentzen, Matthias; Braun, Andreas; Koort, Hans J.

    2002-06-01

    The interest in endodontic use of dental laser systems is increasing. Developing laser technology and a better understanding of laser effects widened the spectrum of possible endodontic indications. Various laser systems including excimer-, argon+-, diode-, Nd:YAG-, Er:YAG- and CO2-lasers are used in pulp diagnosis, treatment of hypersensitivity, pulp capping, sterilization of root canals, root canal shaping and obturation or apicoectomy. With the development of new delivery systems - thin and flexible fibers - for many different wavelengths laser applications in endodontics may increase. Since laser devices are still relatively costly, access to them is limited. Most of the clinical applications are laser assisted procedures such as the removing of pulp remnants and debris or disinfection of infected root canals. The essential question is whether a laser can provide improved treatment over conventional care. To perform laser therapy in endodontics today different laser types with adopted wavelengths and pulse widths are needed, each specific to a particular application. Looking into the future we will need endodontic laser equipment providing optimal laser parameters for different treatment modalities. Nevertheless, the quantity of research reports from the last decade promises a genuine future for lasers in endodontics.

  19. Cutting using the CO laser. Trennen mit dem CO-Laser

    Energy Technology Data Exchange (ETDEWEB)

    Maisenhaelder, F.; Stoehr, M. (DLR, Inst. fuer Technische Physik, Stuttgart (Germany))

    1991-02-01

    Several cutting experiments were performed to investigate the maximum cutting speed when using CO or CO{sub 2} laser radiation. The material which was used for these experiments was mild steel (St 37) and stainless steel (V2A; X5CrNi 189), the material thickness varied from 0.5 mm to 4 mm. The cutting parameters, especially the focal power density and the focal diameter, were equal for both laser wavelengths. The experimental result shows an increased cutting speed with CO laser beams in comparison to CO{sub 2} laser beams.

  20. Laser marking method and device

    International Nuclear Information System (INIS)

    Okazaki, Yuki; Aoki, Nobutada; Mukai, Narihiko; Sano, Yuji; Yamamoto, Seiji.

    1997-01-01

    An object is disposed in laser beam permeating liquid or gaseous medium. Laser beams such as CW laser or pulse laser oscillated from a laser device are emitted to the object to apply laser markings with less degradation of identification and excellent corrosion resistance on the surface of the object simply and easily. Upon applying the laser markings, a liquid or gas as a laser beam permeating medium is blown onto the surface of the object, or the liquid or gas in the vicinity of the object is sucked, the laser beam-irradiated portion on the surface can be cooled positively. Accordingly, the laser marking can be formed on the surface of the object with less heat affection to the object. In addition, if the content of a nitrogen gas in the laser beam permeating liquid medium is reduced by degassing to lower than a predetermined value, or the laser beam permeating gaseous medium is formed by an inert gas, a laser marking having high corrosion resistance and reliability can be formed on the surface of the objective member. (N.H.)

  1. CO laser angioplasty system: efficacy of manipulatable laser angioscope catheter

    Science.gov (United States)

    Arai, Tsunenori; Kikuchi, Makoto; Mizuno, Kyoichi; Sakurada, Masami; Miyamoto, Akira; Arakawa, Koh; Kurita, Akira; Nakamura, Haruo; Takeuchi, Kiyoshi; Utsumi, Atsushi; Akai, Yoshiro

    1992-08-01

    A percutaneous transluminal coronary angioplasty system using a unique combination of CO laser (5 micrometers ) and As-S infrared glass fiber under the guidance of a manipulatable laser angioscope catheter is described. The ablation and guidance functions of this system are evaluated. The angioplasty treatment procedure under angioscope guidance was studied by in vitro model experiment and in vivo animal experiment. The whole angioplasty system is newly developed. That is, a transportable compact medical CO laser device which can emit up to 10 W, a 5 F manipulatable laser angioscope catheter, a thin CO laser cable of which the diameter is 0.6 mm, an angioscope imaging system for laser ablation guidance, and a system controller were developed. Anesthetized adult mongrel dogs (n equals 5) with an artificial complete occlusion in the femoral artery and an artificial human vessel model including occluded or stenotic coronary artery were used. The manipulatability of the catheter was drastically improved (both rotation and bending), therefore, precise control of ablation to expand stenosis was obtained. A 90% artificial stenosis made of human yellow plaque in 4.0 mm diameter in the vessel was expanded to 70% stenosis by repetitive CO laser ablations of which total energy was 220 J. All procedures were performed and controlled under angioscope visualization.

  2. Laser welding engineering

    International Nuclear Information System (INIS)

    Bhieh, N. M.; El Eesawi, M. E.; Hashkel, A. E.

    2007-01-01

    Laser welding was in its early life used mainly for unusual applications where no other welding process would be suitable that was twenty five years ago. Today, laser welding is a fully developed part of the metal working industry, routinely producing welds for common items such as cigarette lighters, which springs, motor/transformer lamination, hermetic seals, battery and pacemaker cans and hybrid circuit packages. Yet very few manufacturing engineering have seriously considers employing lasers in their own operations. Why? There are many reasons, but a main one must be not acquainted with the operation and capabilities of a laser system. Other reasons, such as a relatively high initial cost and a concern about using lasers in the manufacturing environment, also are frequently cited, and the complexity of the component and flexibility of the light delivery system. Laser welding could be used in place of many different standard processes, such as resistance (spot or seam), submerged arc, RF induction, high-frequency resistance, ultrasonic and electronic and electron-beam. while each of these techniques has established an independent function in the manufacturing world, the flexible laser welding approach will operate efficiently and economically in many different applications. Its flexibility will even permit the welding system to be used for other machining function, such as drilling, scribing, sealing and serializing. In this article, we will look at how laser welding works and what benefits it can offer to manufacturing engineers. Some industry observers state that there are already 2,000 laser machine tools being used for cutting, welding and drilling and that the number could reach 30,000 over the next 15 years as manufacturing engineers become more aware of the capabilities of lasers [1). While most laser applications are dedicated to one product or process that involves high-volume, long-run manufacturing, the flexibility of a laser to supply energy to hard

  3. Efeitos dos choques fiscais sobre o mercado de trabalho brasileiro

    Directory of Open Access Journals (Sweden)

    Diogo Baerlocher Carvalho

    2013-06-01

    Full Text Available Esse trabalho tem por objetivo entender quais os efeitos dos choques fiscais sobre o mercado de trabalho brasileiro. Em particular, utiliza se uma abordagem SVAR para avaliar esses efeitos sobre o emprego e o salário real. Os choques fiscais são identificados a partir da imposição de restrições de sinais puras sobre a relação dinâmica entre os gastos do governo, o produto real e a oferta de trabalho. As restrições são obtidas a partir de funções de resposta a impulso Bayesianas derivadas de um modelo DSGE na tradição da Nova Síntese Neoclássica. As funções de resposta a impulso obtidas a partir da abordagem SVAR mostram que choques fiscais aumentam o salário real e o emprego.

  4. Contabilidad de Costos I. - Problemas sobre la contabilización de las actividades relacionadas con la mano de obra

    OpenAIRE

    Morillo Moreno, Marysela C.

    2008-01-01

    ÍNDICE Introducción Problemas sobre terminología básica Problemas básicos sobre el Ciclo de la Contabilidad de Costos Problemas sobre contabilización de las actividades relacionadas con los materiales Problemas sobre la contabilización de las actividades relacionadas con la mano de obra Problemas sobre la contabilización de las actividades relacionadas con los costos indirectos de fabricación Problemas sobre el Ciclo de la Contabilida...

  5. Autobiografía, identidad y memoria familiar. Apuntes sobre Conjeturas sobre la memoria de mi tribu de José Donoso

    Directory of Open Access Journals (Sweden)

    Martín Lombardo

    2015-12-01

    Full Text Available A partir de los desarrollos propuestos por Philippe Lejeune sobre el pacto y el espacio autobiográfico así como la reflexión de Agamben en torno a la creación y a la figura de la excepción, el presente artículo se propone analizar el libro Conjeturas sobre la memoria de mi tribu de José Donoso. En particular, el artículo centra su análisis en la manera en que se concibe el surgimiento de la figura del escritor, en la configuración de la identidad a través de la historia familiar y en la importancia del espacio familiar y del tiempo en la obra de Donoso.

  6. Teradiode's high brightness semiconductor lasers

    Science.gov (United States)

    Huang, Robin K.; Chann, Bien; Burgess, James; Lochman, Bryan; Zhou, Wang; Cruz, Mike; Cook, Rob; Dugmore, Dan; Shattuck, Jeff; Tayebati, Parviz

    2016-03-01

    TeraDiode is manufacturing multi-kW-class ultra-high brightness fiber-coupled direct diode lasers for industrial applications. A fiber-coupled direct diode laser with a power level of 4,680 W from a 100 μm core diameter, BPP) of 3.5 mm-mrad and is the lowest BPP multi-kW-class direct diode laser yet reported. This laser is suitable for industrial materials processing applications, including sheet metal cutting and welding. This 4-kW fiber-coupled direct diode laser has comparable brightness to that of industrial fiber lasers and CO2 lasers, and is over 10x brighter than state-of-the-art direct diode lasers. We have also demonstrated novel high peak power lasers and high brightness Mid-Infrared Lasers.

  7. Color speckle in laser displays

    Science.gov (United States)

    Kuroda, Kazuo

    2015-07-01

    At the beginning of this century, lighting technology has been shifted from discharge lamps, fluorescent lamps and electric bulbs to solid-state lighting. Current solid-state lighting is based on the light emitting diodes (LED) technology, but the laser lighting technology is developing rapidly, such as, laser cinema projectors, laser TVs, laser head-up displays, laser head mounted displays, and laser headlamps for motor vehicles. One of the main issues of laser displays is the reduction of speckle noise1). For the monochromatic laser light, speckle is random interference pattern on the image plane (retina for human observer). For laser displays, RGB (red-green-blue) lasers form speckle patterns independently, which results in random distribution of chromaticity, called color speckle2).

  8. Excertos sobre o sedentarismo

    OpenAIRE

    Palma,Alexandre; Vilaça,Murilo Mariano; Assis,Monique Ribeiro de

    2014-01-01

    O sedentarismo tem sido tratado como algo perfeitamente determinável, objetivo e, portanto, que pode ser apreendido. Por outro lado, o conceito de sedentarismo ainda permanece questionável e, por conseguinte, os instrumentos mostram-se inconsistentes. Neste sentido, o objetivo do presente estudo foi mostrar que diferentes discursos de verdade vêm concorrendo por esse conceito, o que nos motiva a pensar qual é a verdade ou, até mesmo, se há alguma verdade sobre ele. Após apresentarmos diferent...

  9. Recent laser experiments on the Aurora KrF/ICF laser system

    International Nuclear Information System (INIS)

    Turner, T.P.; Jones, J.E.; Czuchlewski, S.J.; Watt, R.G.; Thomas, S.J.; Kang, M.; Tallman, C.R.; Mack, J.M.; Figueira, J.F.

    1990-01-01

    The Aurora KrF/ICF Laser Facility at Los Alamos is operational at the kilojoule-level for both laser and target experiments. We report on recent laser experiments on the system and resulting system improvements. 3 refs., 4 figs

  10. Laser for fusion energy

    International Nuclear Information System (INIS)

    Holzrichter, J.F.

    1995-01-01

    Solid state lasers have proven to be very versatile tools for the study and demonstration of inertial confinement fusion principles. When lasers were first contemplated to be used for the compression of fusion fuel in the late 1950s, the laser output energy levels were nominally one joule and the power levels were 10 3 watts (pulse duration's of 10 -3 sec). During the last 25 years, lasers optimized for fusion research have been increased in power to typically 100,000 joules with power levels approaching 10 14 watts. As a result of experiments with such lasers at many locations, DT target performance has been shown to be consistent with high gain target output. However, the demonstration of ignition and gain requires laser energies of several megajoules. Laser technology improvements demonstrated over the past decade appear to make possible the construction of such multimegajoule lasers at affordable costs. (author)

  11. Laser Processing and Chemistry

    CERN Document Server

    Bäuerle, Dieter

    2011-01-01

    This book gives an overview of the fundamentals and applications of laser-matter interactions, in particular with regard to laser material processing. Special attention is given to laser-induced physical and chemical processes at gas-solid, liquid-solid, and solid-solid interfaces. Starting with the background physics, the book proceeds to examine applications of lasers in “standard” laser machining and laser chemical processing (LCP), including the patterning, coating, and modification of material surfaces. This fourth edition has been enlarged to cover the rapid advances in the understanding of the dynamics of materials under the action of ultrashort laser pulses, and to include a number of new topics, in particular the increasing importance of lasers in various different fields of surface functionalizations and nanotechnology. In two additional chapters, recent developments in biotechnology, medicine, art conservation and restoration are summarized. Graduate students, physicists, chemists, engineers, a...

  12. A Teoria Queer e os Estudos Organizacionais: Revisando Conceitos sobre Identidade

    Directory of Open Access Journals (Sweden)

    Eloisio Moulin de Souza

    2017-05-01

    Full Text Available A teoria queer desenvolveu-se incialmente na década de noventa, nas ciências sociais e humanas, principalmente nos estudos literários e linguísticos, sendo posteriormente incorporada aos estudos organizacionais. Entretanto, apesar de sua aplicação aos estudos organizacionais, ainda existe uma lacuna acerca do debate sobre seus conceitos e significados. Por isso, este artigo objetiva aprofundar e revisar o debate sobre os aspectos desenvolvidos por essa teoria, focando-se nos conceitos relacionados à produção identitária e subjetiva. Para cumprir este intento, as ideias queer sobre identidade, sujeito, performatividade, performance e identificação são apresentadas e debatidas. Defende-se que a teoria queer é um verbo (ação ao invés de um substantivo (identidade e a aplicação de seus conceitos não se restringe somente aos estudos sobre gênero, sexualidade e minorias. Por fim, discute-se a expansão da utilização dos conceitos queer no estudo de outras formas hegemônicas de categorias identitárias presentes no mundo corporativo.

  13. Laser applications for energy. Fifty years since advent of laser and next thirty years

    International Nuclear Information System (INIS)

    Nakai, Sadao

    2011-01-01

    The utilization of light has been changed since the advent of lasers about fifty years ago. Now in the twenty first century, laser science is being applied in every industry as the fundamental technology. In the recent years, remarkable progresses have been made in the semiconductor lasers of high power and wide wavelength region. The amazing developments of ceramics laser materials like YAG and nonlinear optics materials of organic crystals have been achieved as well as the big progress in the fiber lasers. It is also to be pointed out that very high power ultra short laser pulses have become available. In the field of power photonics, which is based on the power semiconductor lasers, fiber lasers and new laser materials, various industrial applications are expected to be constructed further in civil engineering, manufacturing technology, agricultural and biological applications, medical utilization and space sciences. It is expected, by the development of ultra short pulse and ultra high mean power lasers, that particle accelerations, ultra high density sciences, nuclear fusion neutron sources and laser fusion power reactors are to be advanced drastically. Recent development and future prospects of high power lasers are illustrated. Lasers are now regarded as one of the key technologies in line with the national policy toward the creation of innovative industries. Realization of the laser fusion reactor is the most challenging target in the coming thirty years. (S. Funahashi)

  14. Disk laser: a new generation of industrial lasers

    Science.gov (United States)

    Brockmann, Rüdiger; Havrilla, David

    2009-02-01

    The disk laser concept aggregates high efficiency, excellent beam quality, high average and peak power with moderate cost and high reliability. Therefore it became one major technology in industrial laser material processing. In several large scale installations in the automotive industry, high power cw- systems make already use of the high brightness and high efficiency of disk lasers, e.g. in remote welding [1,2]. Other applications including cutting, drilling, deep welding and hybrid welding are arising. This report highlights the latest results in cw disk laser development. A 1.5 kW source with a beam parameter product (BPP) of 2 mm mrad is described as well as the demonstration of a 14 kW system out of three disks with a BPP of 8 mm mrad. The future prospects regarding increased power and even further improved productivity and economics are presented. A new industrial disk laser series with output powers up to 16 kW and a beam parameter product of 8 mm*mrad will enable both, new applications in the thick sheet area and very cost efficient high productive applications like welding and cutting of thin sheets.

  15. Laser development for laser fusion applications. Research progress report, October 1979-September 1980

    International Nuclear Information System (INIS)

    1981-04-01

    Research conducted during this period is reported on the following: (1) rare-gas-halogen lasers, (2) XeCl laser at excitation rates of 1.7 to 4.7 MW/cm 3 , (3) rare gas halogen laser modeling, (4) three-body ion recombination coefficients, (5) electron beam accelerators, (6) power conditioning studies for accelerators, (7) chemically pumped iodine lasers, (8) hydrogen fluoride lasers, and (9) supporting research

  16. A low-cost, tunable laser lock without laser frequency modulation

    Science.gov (United States)

    Shea, Margaret E.; Baker, Paul M.; Gauthier, Daniel J.

    2015-05-01

    Many experiments in optical physics require laser frequency stabilization. This can be achieved by locking to an atomic reference using saturated absorption spectroscopy. Often, the laser frequency is modulated and phase sensitive detection used. This method, while well-proven and robust, relies on expensive components, can introduce an undesirable frequency modulation into the laser, and is not easily frequency tuned. Here, we report a simple locking scheme similar to those implemented previously. We modulate the atomic resonances in a saturated absorption setup with an AC magnetic field created by a single solenoid. The same coil applies a DC field that allows tuning of the lock point. We use an auto-balanced detector to make our scheme more robust against laser power fluctuations and stray magnetic fields. The coil, its driver, and the detector are home-built with simple, cheap components. Our technique is low-cost, simple to setup, tunable, introduces no laser frequency modulation, and only requires one laser. We gratefully acknowledge the financial support of the NSF through Grant # PHY-1206040.

  17. CO2 laser pulse shortening by laser ablation of a metal target

    International Nuclear Information System (INIS)

    Donnelly, T.; Mazoyer, M.; Lynch, A.; O'Sullivan, G.; O'Reilly, F.; Dunne, P.; Cummins, T.

    2012-01-01

    A repeatable and flexible technique for pulse shortening of laser pulses has been applied to transversely excited atmospheric (TEA) CO 2 laser pulses. The technique involves focusing the laser output onto a highly reflective metal target so that plasma is formed, which then operates as a shutter due to strong laser absorption and scattering. Precise control of the focused laser intensity allows for timing of the shutter so that different temporal portions of the pulse can be reflected from the target surface before plasma formation occurs. This type of shutter enables one to reduce the pulse duration down to ∼2 ns and to remove the low power, long duration tails that are present in TEA CO 2 pulses. The transmitted energy is reduced as the pulse duration is decreased but the reflected power is ∼10 MW for all pulse durations. A simple laser heating model verifies that the pulse shortening depends directly on the plasma formation time, which in turn is dependent on the applied laser intensity. It is envisaged that this plasma shutter will be used as a tool for pulse shaping in the search for laser pulse conditions to optimize conversion efficiency from laser energy to useable extreme ultraviolet (EUV) radiation for EUV source development.

  18. Hölderlin: sobre la religión

    Directory of Open Access Journals (Sweden)

    Andrés Alfredo Castrillón Castrillón

    2014-06-01

    Full Text Available El artículo se propone dilucidar la noción de religión que tiene Friedrich Hölderlin en el ensayo “Sobre la religión”, el cual traza un pensamiento tan o más complejo de la relación hombre - dios, y hombre - comunidad, que los de filósofos como Kant o Hegel en sus reflexiones sobre Dios y la religión. Destacar por medio del análisis del ensayo cómo comprende Hölderlin la religión y cómo la vincula con la vida de los hombres en su contexto es la tarea fundamental del escrito, para concluir con las propuestas poéticas de la fundación de religiones o sus manifestaciones a través del mito.

  19. Laser safety tools and training

    CERN Document Server

    Barat, Ken

    2008-01-01

    Lasers perform many unique functions in a plethora of applications, but there are many inherent risks with this continually burgeoning technology. Laser Safety: Tools and Training presents simple, effective ways for users in a variety of facilities to evaluate the hazards of any laser procedure and ensure they are following documented laser safety standards.Designed for use as either a stand-alone volume or a supplement to Laser Safety Management, this text includes fundamental laser and laser safety information and critical laser use information rarely found in a single source. The first lase

  20. Investigación sobre el cotidiano del sujeto: oportunidades para una ciencia aplicada

    Directory of Open Access Journals (Sweden)

    Manuel Amezcua

    2012-01-01

    Full Text Available Desde un modelo de investigación emergente, la Investigación Aplicada a los Cuidados, se propone reflexionar sobre una de las áreas de indagación: la Investigación sobre el Cotidiano del Sujeto. El cotidiano del sujeto se conceptualiza como un espacio de interacción social donde las personas ejercen autonomía para tomar decisiones y ejecutar acciones para cuidar su salud. A través de diseños principalmente cualitativos, la Investigación sobre el Cotidiano del Sujeto aporta evidencias útiles y pertinentes para la práctica enfermera porque hablan del contexto y desde la perspectiva de los sujetos. Estas evidencias pueden encuadrarse en cuatro grandes dimensiones: la comprensión del padecimiento humano ante la enfermedad, la cultura del cuidado, la percepción sobre las intervenciones en salud, y el cotidiano del cuidador. Finalmente se plantean algunos desafíos que nos propone la Investigación sobre el Cotidiano del Sujeto e implican tres dimensiones imprescindibles en el ejercicio del cuidado: la dimensión ética, política y científica.

  1. Injection-controlled laser resonator

    Science.gov (United States)

    Chang, J.J.

    1995-07-18

    A new injection-controlled laser resonator incorporates self-filtering and self-imaging characteristics with an efficient injection scheme. A low-divergence laser signal is injected into the resonator, which enables the injection signal to be converted to the desired resonator modes before the main laser pulse starts. This injection technique and resonator design enable the laser cavity to improve the quality of the injection signal through self-filtering before the main laser pulse starts. The self-imaging property of the present resonator reduces the cavity induced diffraction effects and, in turn, improves the laser beam quality. 5 figs.

  2. High power laser research and development at the Laboratory for Laser Energetics

    International Nuclear Information System (INIS)

    Soures, J.M.; McCrory, R.L.; Cerqua, K.A.

    1986-01-01

    As part of its research mission - to investigate the interaction of intense radiation with matter - the Laboratory for Laser Energetics (LLE) of the University of Rochester is developing a number of high-peak power and high-average-power laser systems. In this paper we highlight some of the LLE work on solid-state laser research, development and applications. Specifically, we discuss the performance and operating characteristics of Omega, a twenty-four beam, 4000 Joule, Nd:glass laser system which is frequently tripled using the polarization mismatch scheme. We also discuss progress in efforts to develop high-average-power solid-state laser systems with active-mirror and slab geometries and to implement liquid-crystal devices in high-power Nd:glass lasers. Finally we present results from a program to develop a compact, ultrahigh-peak-power solid-state laser using the concept of frequency chirped pulse amplification

  3. Verification of a characterization method of the laser-induced selective activation based on industrial lasers

    DEFF Research Database (Denmark)

    Zhang, Yang; Hansen, Hans Nørgaard; Tang, Peter T.

    2013-01-01

    In this article, laser-induced selective activation (LISA) for subsequent autocatalytic copper plating is performed by several types of industrial scale lasers, including a Nd:YAG laser, a UV laser, a fiber laser, a green laser, and a short pulsed laser. Based on analysis of all the laser......-machined surfaces, normalized bearing area curves and parameters are used to characterize the surface quantitatively. The range of normalized bearing area curve parameters for plate-able surface is suggested. PBT/PET with 40 % glass fiber was used as the substrate material. For all of the studied lasers......, the parameters were varied in a relatively large range, and matrixes of the laser-machined surface were obtained. The topography of those laser-machined surfaces was examined by scanning electronic microscope (SEM). For each sample examined by SEM, there was an identical workpiece plated by for 90 min...

  4. Walter Benjamin em Gotham City: sobre a violência pura

    Directory of Open Access Journals (Sweden)

    Andityas Soares de Moura Costa Matos

    2016-12-01

    Full Text Available http://dx.doi.org/10.5007/2177-7055.2016v37n74p137 O presente trabalho reflete brevemente sobre as ideias de violência pura e de estado de exceção efetivo no pensamento de Walter Benjamin (1892-1940, lançando na seção 2 a hipótese de que são resultados de uma longa meditação que começa com o texto Sobre a crítica da violência (1921, passa pelo denso fragmento O caráter destrutivo (1931 e chega à obra intitulada Teses sobre o conceito de história (1940, quando Benjamin percebe com clareza à impossibilidade de se negociar com as instituições democrático-liberais, as quais funcionam como estruturas desaceleradoras (katéchonta do tempo da revolução, leitura apresentada na seção 1 mediante a profanação do conceito original schmittiano. O artigo passa então na seção 3 a interpretar as ideias de Benjamin em um cenário de ficção – a trilogia Batman de Christopher Nolan – que a cada dia parece mais terrivelmente real, concluindo com um parágrafo de sabor agambeniano sobre o direito-que-vem (seção 4.

  5. ENTORNOS MPLS Y ATM PARA EL TRANSPORTE DE VOZ SOBRE INTERNET

    Directory of Open Access Journals (Sweden)

    Nancy Yaneth Gelvez García

    2012-08-01

    Full Text Available Este artículo presenta los resultados obtenidos en el estudio de la calidad de servicio sobre redes IP en tráficos sensibles al retardo como la VoIP sobre la tecnología ATM y MPLS. Se analizaran diferentes topologías con características propias que permitirán evaluar valores tales como el retardo y el ancho de banda.

  6. Pesquisa documental sobre a história da hanseníase no Brasil

    OpenAIRE

    Santos,Vicente Saul Moreira dos

    2003-01-01

    Este trabalho apresenta resultados parciais de uma pesquisa sobre fontes relativas à lepra, realizada em diversas instituições da cidade do Rio de Janeiro. No Real Gabinete Português de Leitura, no Arquivo Nacional e na Biblioteca Nacional foram pesquisados livros, índices, ofícios e fotografias sobre administração de leprosários e artigos sobre o tratamento da doença. No Centro de Pesquisa e Documentação de História Contemporânea do Brasil (CPDOC-FGV) foram consultados diversos arquivos, des...

  7. Una nota sobre formación y formalismo del contrato electrónico

    Directory of Open Access Journals (Sweden)

    Silvana Fortich

    2011-06-01

    Full Text Available Este artículo pretende llamar la atención sobre algunas de las particularidades que presenta la celebración de contratos por medios electrónicos, indagando sobre las características propias de su formación y sobre la influencia del proceso general de renacimiento del formalismo en el campo del comercio electrónico. El estudio es realizado con base en las normas del derecho contemporáneo francés y colombiano que se ocupan de regular la materia.

  8. Una nota sobre formación y formalismo del contrato electrónico

    Directory of Open Access Journals (Sweden)

    Silvana Fortich

    2011-07-01

    Full Text Available Este artículo pretende llamar la atención sobre algunas de las particularidades que presenta la celebración de contratos por medios electrónicos, indagando sobre las características propias de su formación y sobre la influencia del proceso general de renacimiento del formalismo en el campo del comercio electrónico. El estudio es realizado con base en las normas del derecho contemporáneo francés y colombiano que se ocupan de regular la materia.

  9. Dependence of Parameters of Laser-Produced Au Plasmas on the Incident Laser Energy of Sub-Nanosecond and Picosecond Laser Pulses

    International Nuclear Information System (INIS)

    Woryna, E.; Badziak, J.; Makowski, J.; Parys, P.; Vankov, A.B.; Wolowski, J.; Krasa, J.; Laska, L.; Rohlena, K.

    2001-01-01

    The parameters of Au plasma as functions of laser energy for ps pulses are presented and compared with the ones for sub-ns pulses at nearly the same densities of laser energy. The experiments were performed at the IPPLM with the use of CPA (chirped pulse amplification) Nd:glass laser system. Thick Au foil targets were irradiated by normally incident focused laser beams with maximum intensities of 8x10 16 and 2x10 14 W/cm 2 for ps and sub-ns laser pulses, respectively. The characteristics of ion streams were investigated with the use of ion diagnostics methods based on the time-of flight technique. In these experiments the laser energies were changed in the range from 90 to 700 mJ and the measurements were performed at a given focus position FP = 0 and along the target normal for both the laser pulses. The charge carried by the ions, the maximum ion velocities of fast and thermal ion groups, the maximum ion current density as well as the area of photopeak in dependence on the incident laser energy for sub-ns and ps pulses were investigated and discussed. (author)

  10. Teorias sobre o amor no campo da Psicologia Social

    OpenAIRE

    Martins-Silva, Priscilla de Oliveira; Trindade, Zeidi Araujo; Silva Junior, Annor da

    2013-01-01

    Este é um ensaio teórico sobre o fenômeno amor em relacionamentos românticos no campo da Psicologia e no da Psicologia social. São apresentadas as primeiras teorias sobre o amor na Psicologia, e, posteriormente, são abordadas em maior profundidade três teorias da Psicologia social: os estilos de amor de John Alan Lee, a teoria de apego, de Phillip Shaver, Cindy Hazan e Donna Bradshaw, e a teoria triangular do amor, de Robert J. Sternberg. São apresentados os aspectos teóricos, empíricos e met...

  11. Estudios en Solanaceae – XXIII sobre dos especies nuevas de cuatresia Estudios en Solanaceae – XXIII sobre dos especies nuevas de Cuatresia

    Directory of Open Access Journals (Sweden)

    Hunziker Armando T.

    1986-12-01

    Full Text Available Two new Colombian species of Cuatre sia (Solanaceae, are clescribed and illustrated. Con motivo de la preparación de una sinopsis preliminar sobre Cuatresia A. T. Hunz., ha quedado en evidencia una serie de especies indescritas, 2 de las cuales presento seguidamente.  Es esta una buena oportunidad para llamar la atención de los colegas sobre este difícil y olvidado género de Solanáceas.  En su gran mayoría, las dificultades se originan en los materiales disponibles, que son escasos y fragmentarios; varias especies se conocen por una única colección (a veces con apenas 1 o 2 flores, en la mayoría se ignora cómo son el fruto, la semilla y el embrión, y en otros casos, las observaciones sobre el color de la corola son contradictorias, o imprecisas, o faltan por completo. Por todo ello, quisiera incitar a quienes tienen el privilegio de acceder a las regiones donde crecen estas plantas, a que extremen los recaudos para que las colecciones de Cuatresia mejoren en calidad y cantidad.

  12. Active-passively mode-locked dye laser for diagnosis of laser-produced plasmas

    International Nuclear Information System (INIS)

    Teng, Y.L.; Fedosejevs, R.; Sigel, R.

    1981-03-01

    In this report an active-passively mode-locked, flashlamp-pumped dye laser for diagnosis of laser-produced plasmas is described. This dye laser system used as a pulsed light source for high-speed photography of laser-target experiments was synchronized to the ASTERIX III iodine laser pulse with better than 100 ps accuracy. The single pulse energy was 10 μJ, pulse duration less than 10 ps. In 111 shots clear shadowgrams were obtained during a total of 151 target shots, i.e. the system worked well in 74% of the shots. (orig.)

  13. Solar pumped laser

    Science.gov (United States)

    Lee, J. H.; Hohl, F.; Weaver, W. R. (Inventor)

    1984-01-01

    A solar pumped laser is described in which the lasant is a gas that will photodissociate and lase when subjected to sunrays. Sunrays are collected and directed onto the gas lasant to cause it to lase. Applications to laser propulsion and laser power transmission are discussed.

  14. Diode lasers optimized in brightness for fiber laser pumping

    Science.gov (United States)

    Kelemen, M.; Gilly, J.; Friedmann, P.; Hilzensauer, S.; Ogrodowski, L.; Kissel, H.; Biesenbach, J.

    2018-02-01

    In diode laser applications for fiber laser pumping and fiber-coupled direct diode laser systems high brightness becomes essential in the last years. Fiber coupled modules benefit from continuous improvements of high-power diode lasers on chip level regarding output power, efficiency and beam characteristics resulting in record highbrightness values and increased pump power. To gain high brightness not only output power must be increased, but also near field widths and far field angles have to be below a certain value for higher power levels because brightness is proportional to output power divided by beam quality. While fast axis far fields typically show a current independent behaviour, for broadarea lasers far-fields in the slow axis suffer from a strong current and temperature dependence, limiting the brightness and therefore their use in fibre coupled modules. These limitations can be overcome by carefully optimizing chip temperature, thermal lensing and lateral mode structure by epitaxial and lateral resonator designs and processing. We present our latest results for InGaAs/AlGaAs broad-area single emitters with resonator lengths of 4mm emitting at 976nm and illustrate the improvements in beam quality over the last years. By optimizing the diode laser design a record value of the brightness for broad-area lasers with 4mm resonator length of 126 MW/cm2sr has been demonstrated with a maximum wall-plug efficiency of more than 70%. From these design also pump modules based on 9 mini-bars consisting of 5 emitters each have been realized with 360W pump power.

  15. Longitudinally excited CO2 laser with multiple laser tubes

    Science.gov (United States)

    Uno, Kazuyuki; Akitsu, Tetsuya; Jitsuno, Takahisa

    2016-11-01

    We developed a longitudinally excited CO2 laser system that was constituted of two or three laser tubes and a single driving circuit. The multiple laser tubes simultaneously produced almost the same short laser pulses with a spike pulse width of about 164 ns and a pulse tail length of about 74 μs with a single driving circuit. The double-tube system was constituted of two 30 cm-long laser tubes with inner diameters of 13 mm and 16 mm and a single driving circuit with an input energy of 2.18 J. The output energy of the 13 mm-tube was 23.3 mJ, and that of the 16 mm-tube was 21.9 mJ at a gas pressure of 4.2 kPa (CO2:N2:He = 1:1:2). The triple-tube system was constituted of three 30 cm-long laser tubes with inner diameters of 9 mm, 13 mm, and 16 mm and a single driving circuit with an input energy of 2.18 J. The output energy of the 9 mm tube was 15.9 mJ, that of the 13 mm tube was 24.1 mJ, and that of the 16 mm tube was 19.2 mJ at a gas pressure of 4.2 kPa. With the same driving circuit and the same input energy, the total output energies of the multitube laser systems were higher than the output energy of a single-tube system.

  16. Technology of discharge and laser resonators for high power CO2 lasers. Koshutsuryoku CO2 laser ni tsukawareru hoden reiki laser kyoshinki gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Takenaka, Y.; Kuzumoto, M. (Mitsubishi Electric Corp., Tokyo (Japan))

    1994-03-20

    This paper describes discharge excitation technology and resonator technology as basic technologies for high power CO2 lasers. As a result of progress in high-frequency power element techniques, the discharge excitation technology now generally uses laser excitation using AC discharge of capacity coupling type. Its representative example is silent discharge (SD) excitation. This is a system to excite laser by applying high voltages with as high frequency as 100 kHz to 1 MHz across a pair of electrodes covered with a dielectric material. The system maintains stability in discharge even if power supply voltage amplitude is modulated, and easily provides pulse outputs. Discharge excitation for diffusion cooled type CO2 laser generates a discharge in a gap with a gap length of about 2 mm, and can perform gas cooling by means of thermal conduction of gas, whereas a compact resonator can be fabricated. A resonator for the diffusion cooled type CO2 laser eliminates gas circulation and cooling systems, hence the device can be made more compact. A report has been given that several of these compact resonators were combined, from which a laser output of 85W was obtained by using RF discharge of 2kW. 43 refs., 21 figs.

  17. Nuclear-pumped lasers

    CERN Document Server

    Prelas, Mark

    2016-01-01

    This book focuses on Nuclear-Pumped Laser (NPL) technology and provides the reader with a fundamental understanding of NPLs, a review of research in the field, and exploration of large scale NPL system design and applications. Early chapters look at the fundamental properties of lasers, nuclear-pumping and nuclear reactions that may be used as drivers for nuclear-pumped lasers. The book goes on to explore the efficient transport of energy from the ionizing radiation to the laser medium and then the operational characteristics of existing nuclear-pumped lasers. Models based on Mathematica, explanations and a tutorial all assist the reader’s understanding of this technology. Later chapters consider the integration of the various systems involved in NPLs and the ways in which they can be used, including beyond the military agenda. As readers will discover, there are significant humanitarian applications for high energy/power lasers, such as deflecting asteroids, space propulsion, power transmission and mining....

  18. Atomic iodine laser

    International Nuclear Information System (INIS)

    Fisk, G.A.; Gusinow, M.A.; Hays, A.K.; Padrick, T.D.; Palmer, R.E.; Rice, J.K.; Truby, F.K.; Riley, M.E.

    1978-05-01

    The atomic iodine photodissociation laser has been under intensive study for a number of years. The physics associated with this system is now well understood and it is possible to produce a 0.1 nsec (or longer) near-diffraction-limited laser pulse which can be amplified with negligible temporal distortion and little spatial deformation. The output of either a saturated or unsaturated amplifier consists of a high-fidelity near-diffraction-limited, energetic laser pulse. The report is divided into three chapters. Chapter 1 is a survey of the important areas affecting efficient laser operation and summarizes the findings of Chap. 2. Chapter 2 presents detailed discussions and evaluations pertinent to pumps, chemical regeneration, and other elements in the overall laser system. Chapter 3 briefly discusses those areas that require further work and the nature of the work required to complete the full-scale evaluation of the applicability of the iodine photodissociation laser to the inertial confinement program

  19. Principles of Lasers

    CERN Document Server

    Svelto, Orazio

    2010-01-01

    This new Fifth Edition of Principles of Lasers incorporates corrections to the previous edition. The text’s essential mission remains the same: to provide a wide-ranging yet unified description of laser behavior, physics, technology, and current applications. Dr. Svelto emphasizes the physical rather than the mathematical aspects of lasers, and presents the subject in the simplest terms compatible with a correct physical understanding. Praise for earlier editions: "Professor Svelto is himself a longtime laser pioneer and his text shows the breadth of his broad acquaintance with all aspects of the field … Anyone mastering the contents of this book will be well prepared to understand advanced treatises and research papers in laser science and technology." (Arthur L. Schawlow, 1981 Nobel Laureate in Physics) "Already well established as a self-contained introduction to the physics and technology of lasers … Professor Svelto’s book, in this lucid translation by David Hanna, can be strongly recommended for...

  20. Improvements of the ruby laser oscillator system for laser scattering

    International Nuclear Information System (INIS)

    Yamauchi, Toshihiko; Kumagai, Katsuaki; Kawakami, Tomohide; Matoba, Tohru; Funahashi, Akimasa

    1978-10-01

    A ruby laser oscillator system is used to measure electron temperatures of the Tokamak plasmas(JFT-2 and JFT-2a). Improvements have been made of the laser oscillator to obtain the correct values. Described are the improvements and the damages of a ruby rod and a KD*P crystal for Q-switching by laser beam. Improvement are the linear Xe lamp replaced by a helical Xe lamp and in the electrical circuit for Q-switching. The damage of an optical component by a laser beam should be clarified from the damage data; the cause is not found yet. (author)

  1. Direct pumping of ultrashort Ti:sapphire lasers by a frequency doubled diode laser

    DEFF Research Database (Denmark)

    Müller, André; Jensen, Ole Bjarlin; Unterhuber, Angelika

    2011-01-01

    electro-optical efficiency of the diode laser. Autocorrelation measurements show that pulse widths of less than 20 fs can be expected with an average power of 52 mW when using our laser. These results indicate the high potential of direct diode laser pumped Ti: sapphire lasers to be used in applications....... When using our diode laser system, the optical conversion efficiencies from green to near-infrared light reduces to 75 % of the values achieved with the commercial pump laser. Despite this reduction the overall efficiency of the Ti: sapphire laser is still increased by a factor > 2 due to the superior...... like retinal optical coherence tomography (OCT) or pumping of photonic crystal fibers for CARS (coherent anti-stokes Raman spectroscopy) microscopy....

  2. Laser-induced stresses versus mechanical stress power measurements during laser ablation of solids

    International Nuclear Information System (INIS)

    Shannon, M.A.; Russo, R.E.

    1995-01-01

    Laser-induced stresses resulting from high-power laser-material interactions have been studied extensively. However, the rate of change in mechanical energy, or stress power, due to laser-induced stresses has only recently been investigated. An unanswered question for monitoring laser-material interactions in the far-field is whether stress power differs from stresses measured, particularly with respect to laser-energy coupling to a solid target. This letter shows experimental acoustic data which demonstrate that stress power measured in the far field of the target shows changes in laser-energy coupling, whereas the stresses measured do not. For the ambient medium above the target, stress power and stress together reflect changes in laser-energy coupling. copyright 1995 American Institute of Physics

  3. Determinants of holmium:yttrium-aluminum-garnet laser time and energy during ureteroscopic laser lithotripsy.

    Science.gov (United States)

    Molina, Wilson R; Marchini, Giovanni S; Pompeo, Alexandre; Sehrt, David; Kim, Fernando J; Monga, Manoj

    2014-04-01

    To evaluate the association of preoperative noncontrast computed tomography stone characteristics, laser settings, and stone composition with cumulative holmium:yttrium-aluminum-garnet (Ho:YAG) laser time/energy. We retrospectively reviewed patients who underwent semirigid/flexible ureteroscopy and Ho:YAG laser lithotripsy (200 or 365 μm laser fiber; 0.8-1.0 J energy; and 8-10 Hz rate) at 2 tertiary care centers (April 2010-May 2012). Studied parameters were as follows: patient's characteristics; stone characteristics (location, burden, hardness, and composition); total laser time and energy; and surgical outcomes. One hundred patients met our inclusion criteria. Mean stone size was 1.01 ± 0.42 cm and volume 0.33 ± 0.04 cm(3). Mean stone radiodensity was 990 ± 296 HU, and Hounsfield units density 13.8 ± 6.0 HU/mm. All patients were considered stone free. Stone size and volume had a significant positive correlation with laser energy (R = 0.516, P R = 0.621, P R = 0.477, P R = 0.567, P stone size, only the correlation between HU and laser time was significant (R = 0.262, P = .011). In the multivariate analysis, with exception of stone composition (P = .103), all parameters significantly increased laser energy (R(2) = 0.524). Multivariate analysis revealed a positive significant association of laser time with stone volume (P R(2) = 0.512). In multivariate analysis for laser energy, only calcium phosphate stones required less energy to fragment compared with uric acid stones. No significant differences were found in the multivariate laser time model. Ho:YAG laser cumulative energy and total time are significantly affected by stone dimensions, hardness location, fiber size, and power. Kidney location, laser fiber size, and laser power have more influence on the final laser energy than on the total laser time. Calcium phosphate stones require less laser energy to fragment. Copyright © 2014 Elsevier Inc. All rights reserved.

  4. Conocimientos sobre VIH/sida en un grupo de embarazadas VIH(+)

    OpenAIRE

    Guerra, ME; Rodríguez, AI; S, Rodríguez; Tovar, V; A, Carvajal; Ferreira, A; Blanco, L; León, JR

    2009-01-01

    OBJETIVO: Determinar el grado de conocimiento sobre VIH/SIDA en mujeres embarazadas VIH(+). MATERIALES Y MÉTODOS: El universo estuvo constituido por 58 embarazadas VIH(+) que acudieron a diferentes servicios de obstetricia de hospitales en Caracas durante los años 2003-2005. Se le aplicó una encuesta anónima individual, previo consentimiento asistido de las evaluadas. RESULTADOS: Fundamentalmente no existe un adecuado conocimiento sobre las vías de transmisión de la enfermedad, así como perce...

  5. Lasers: principles, applications and energetic measures

    International Nuclear Information System (INIS)

    Subran, C.; Sagaut, J.; Lapointe, S.

    2009-01-01

    After having recalled the principles of a laser and the properties of the laser beam, the authors describe the following different types of lasers: solid state lasers, fiber lasers, semiconductor lasers, dye lasers and gas lasers. Then, their applications are given. Very high energy lasers can reproduce the phenomenon of nuclear fusion of hydrogen atoms. (O.M.)

  6. Laser performance upgrade for precise ICF experiment in SG-Ⅲ laser facility

    Directory of Open Access Journals (Sweden)

    Wanguo Zheng

    2017-09-01

    Full Text Available The SG-Ⅲ laser facility (SG-Ⅲ is the largest laser driver for inertial confinement fusion (ICF researches in China, which has 48 beamlines and can deliver 180 kJ ultraviolet laser energy in 3 ns. In order to meet the requirements of precise physics experiments, some new functionalities need to be added to SG-Ⅲ and some intrinsic laser performances need upgrade. So at the end of SG-Ⅲ's engineering construction, the 2-year laser performance upgrade project started. This paper will introduce the newly added functionalities and the latest laser performance of SG-Ⅲ. With these function extensions and performance upgrade, SG-Ⅲ is now fully prepared for precise ICF experiments and solidly paves the way towards fusion ignition.

  7. Stabilizing laser energy density on a target during pulsed laser deposition of thin films

    Science.gov (United States)

    Dowden, Paul C.; Jia, Quanxi

    2016-05-31

    A process for stabilizing laser energy density on a target surface during pulsed laser deposition of thin films controls the focused laser spot on the target. The process involves imaging an image-aperture positioned in the beamline. This eliminates changes in the beam dimensions of the laser. A continuously variable attenuator located in between the output of the laser and the imaged image-aperture adjusts the energy to a desired level by running the laser in a "constant voltage" mode. The process provides reproducibility and controllability for deposition of electronic thin films by pulsed laser deposition.

  8. Laser transmitter system

    International Nuclear Information System (INIS)

    Dye, R.A.

    1975-01-01

    A laser transmitter system is disclosed which utilizes mechanical energy for generating an output pulse. The laser system includes a current developing device such as a piezoelectric crystal which charges a storage device such as a capacitor in response to a mechanical input signal. The capacitor is coupled to a switching device, such as a silicon controlled rectifier (SCR). The switching device is coupled to a laser transmitter such as a GaAs laser diode, which provides an output signal in response to the capacitor being discharged

  9. Regenerative similariton laser

    Directory of Open Access Journals (Sweden)

    Thibault North

    2016-05-01

    Full Text Available Self-pulsating lasers based on cascaded reshaping and reamplification (2R are capable of initiating ultrashort pulses despite the accumulation of large amounts of nonlinearities in all-fiber resonators. The spectral properties of pulses in self-similar propagation are compatible with cascaded 2R regeneration by offset filtering, making parabolic pulses suitable for the design of a laser of this recently introduced class. A new type of regenerative laser giving birth to similaritons is numerically investigated and shows that this laser is the analog of regenerative sources based solely on self-phase modulation and offset filtering. The regenerative similariton laser does not suffer from instabilities due to excessive nonlinearities and enables ultrashort pulse generation in a simple cavity configuration.

  10. 1.8kW laser diode pumped YAG laser; Shutsuryoku 1.8kW no handotai laser reiki YAG laser

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Toshiba Corporation, as a participant in Ministry of International Trade and Industry`s `photon measurement and processing technology project` since August, 1997, is engaged in the development of an energy-efficient LD (laser diode) pumped semiconductor YAG (yttrium-aluminum-garnet) laser device to be used for welding and cutting. It is a 5-year project and the goal is a mean output of 10kW and efficiency of 20%. In this article, a simulation program is developed which carries out calculation about element technology items such as the tracking of the beam from the pumping LD and the excitation distribution, temperature distribution, thermal stress distribution, etc., in the YAG rod. An oscillator is constructed, based on the results of the simulation, and it exhibits a world-high class continuous laser performance of a 1.8kW output and 13% efficiency. The record of 13% efficiency is five times higher than that achieved by the conventional lamp-driven YAG laser device. (translated by NEDO)

  11. High temperature semiconductor diode laser pumps for high energy laser applications

    Science.gov (United States)

    Campbell, Jenna; Semenic, Tadej; Guinn, Keith; Leisher, Paul O.; Bhunia, Avijit; Mashanovitch, Milan; Renner, Daniel

    2018-02-01

    Existing thermal management technologies for diode laser pumps place a significant load on the size, weight and power consumption of High Power Solid State and Fiber Laser systems, thus making current laser systems very large, heavy, and inefficient in many important practical applications. To mitigate this thermal management burden, it is desirable for diode pumps to operate efficiently at high heat sink temperatures. In this work, we have developed a scalable cooling architecture, based on jet-impingement technology with industrial coolant, for efficient cooling of diode laser bars. We have demonstrated 60% electrical-to-optical efficiency from a 9xx nm two-bar laser stack operating with propylene-glycolwater coolant, at 50 °C coolant temperature. To our knowledge, this is the highest efficiency achieved from a diode stack using 50 °C industrial fluid coolant. The output power is greater than 100 W per bar. Stacks with additional laser bars are currently in development, as this cooler architecture is scalable to a 1 kW system. This work will enable compact and robust fiber-coupled diode pump modules for high energy laser applications.

  12. Laser Plasma Instability Experiments with KrF Lasers

    National Research Council Canada - National Science Library

    Weaver, J. L; Oh, J; Afeyan, B; Phillips, L; Seely, J; Feldman, U; Brown, C; Karasik, , M; Serlin, V; Aglitskiy, Y; Mostovych, A. N

    2007-01-01

    ...) with a rep-rate system that has a per pulse laser energy well below 1 megajoule. Measurements of LPI using the Nike KrF laser are presented at and above intensities needed for the FTF (Ĩ2x1015 W/cm2...

  13. Laser cladding with powder

    NARCIS (Netherlands)

    Schneider, M.F.; Schneider, Marcel Fredrik

    1998-01-01

    This thesis is directed to laser cladding with powder and a CO2 laser as heat source. The laser beam intensity profile turned out to be an important pa6 Summary rameter in laser cladding. A numerical model was developed that allows the prediction of the surface temperature distribution that is

  14. Visible Solid State Lasers

    NARCIS (Netherlands)

    Hikmet, R.A.M.

    2007-01-01

    Diode lasers can be found in various applications most notably in optical communication and optical storage. Visible lasers were until recently were all based on IR diode lasers. Using GaN, directly blue and violet emitting lasers have also been introduced to the market mainly in the area of optical

  15. Crítica y reformismo dieciochescos. Algunos textos sobre Filipinas

    Directory of Open Access Journals (Sweden)

    García de los Arcos, María Fernanda

    1996-12-01

    Full Text Available Not available.

    Al igual que en España y América, en las Filipinas de la segunda mitad del siglo XVIII se produjeron escritos en los que se analizaba la realidad del archipiélago, las causas de sus problemas y las posibles soluciones para superarlos. Algunos de estos textos permanecen inéditos. Así ocurre con los tres que se estudian en este artículo, en el que se hace una valoración comparativa sobre sus posibilidades como fuentes para apreciar la situación general de las Islas en ese período y las ideas que tenía la élite dirigente sobre ella, especialmente en tres aspectos: la personalidad colectiva de los nativos; las formas de explotación colonial y sus repercusiones sobre la mayoría de la población y las causas que originaban lo que entonces llamaban “el atraso” de aquellos territorios.

  16. Development of laser technology in Research Center of Laser Fusion

    International Nuclear Information System (INIS)

    Zheng Wanguo; Deng Ying; Zhou Wei

    2013-01-01

    This paper reviews the progress in the construction of SG-Ⅲ laser facility, integrated Testbed and XG-Ⅲ laser facility and that in the upgrade of the prototype of SG-Ⅲ, and the development in assembling and installing technology, and the achievements in maintaining cleanliness project and metrology in Laser Fusion Research Center, China Academy of Engineering Physics in China in 2012. (authors)

  17. Laser systems configured to output a spectrally-consolidated laser beam and related methods

    Science.gov (United States)

    Koplow, Jeffrey P [San Ramon, CA

    2012-01-10

    A laser apparatus includes a plurality of pumps each of which is configured to emit a corresponding pump laser beam having a unique peak wavelength. The laser apparatus includes a spectral beam combiner configured to combine the corresponding pump laser beams into a substantially spatially-coherent pump laser beam having a pump spectrum that includes the unique peak wavelengths, and first and second selectively reflective elements spaced from each other to define a lasing cavity including a lasing medium therein. The lasing medium generates a plurality of gain spectra responsive to absorbing the pump laser beam. Each gain spectrum corresponds to a respective one of the unique peak wavelengths of the substantially spatially-coherent pump laser beam and partially overlaps with all other ones of the gain spectra. The reflective elements are configured to promote emission of a laser beam from the lasing medium with a peak wavelength common to each gain spectrum.

  18. Laser ablation of UHMWPE-polyethylene by 438 nm high energy pulsed laser

    Energy Technology Data Exchange (ETDEWEB)

    Torrisi, L.; Gammino, S.; Mezzasalma, A.M.; Visco, A.M.; Badziak, J.; Parys, P.; Wolowski, J.; Woryna, E.; Krasa, J.; Laska, L.; Pfeifer, M.; Rohlena, K.; Boody, F.P

    2004-04-15

    Pulsed laser ablation of ultra-high-molecular-weight-polyethylene (UHMWPE) is investigated at Prague Asterix Laser System (PALS) Laboratory. The high ablation yield as a function of laser energy is presented at 438 nm laser wavelength. The mechanisms of the polymer ablation are studied on the base of ''in situ'' analysis, such as mass quadrupole spectrometry and time-of-flight measurements, and ''ex situ'' analysis, such as SEM investigations and Raman spectroscopy. Results show that the laser irradiation induces a strong polymer dehydrogenation and molecular emission due to different C{sub x}H{sub y} groups having high kinetic energy and high charge state. At a laser pulse energy of 150 J the H{sup +}, C{sup n+} ions (n=1 to 6) are emitted from the plasma with velocities of the order of 10{sup 8} cm/s, while the C{sub x}H{sub y} groups and the carbon clusters, detected up to C{sub 16}, have a velocity about one or two order magnitude lower. The laser ablation process produces a deep crater in the polymer, which depth depends on the laser pulse energy and it is of the order of 500 {mu}m. The crater volume increases with the laser pulse energy. Results demonstrated that the laser radiation modifies the polymer chains because dehydrogenated material and carbon-like structures are detected in the crater walls and in the bottom of the crater, respectively. A comparison of the experimental results with the data available in literature is presented and discussed.

  19. Double pulse laser ablation and plasma: Laser induced breakdown spectroscopy signal enhancement

    International Nuclear Information System (INIS)

    Babushok, V.I.; DeLucia, F.C.; Gottfried, J.L.; Munson, C.A.; Miziolek, A.W.

    2006-01-01

    A review of recent results of the studies of double laser pulse plasma and ablation for laser induced breakdown spectroscopy applications is presented. The double pulse laser induced breakdown spectroscopy configuration was suggested with the aim of overcoming the sensitivity shortcomings of the conventional single pulse laser induced breakdown spectroscopy technique. Several configurations have been suggested for the realization of the double pulse laser induced breakdown spectroscopy technique: collinear, orthogonal pre-spark, orthogonal pre-heating and dual pulse crossed beam modes. In addition, combinations of laser pulses with different wavelengths, different energies and durations were studied, thus providing flexibility in the choice of wavelength, pulse width, energy and pulse sequence. The double pulse laser induced breakdown spectroscopy approach provides a significant enhancement in the intensity of laser induced breakdown spectroscopy emission lines up to two orders of magnitude greater than a conventional single pulse laser induced breakdown spectroscopy. The double pulse technique leads to a better coupling of the laser beam with the plasma plume and target material, thus providing a more temporally effective energy delivery to the plasma and target. The experimental results demonstrate that the maximum effect is obtained at some optimum separation delay time between pulses. The optimum value of the interpulse delay depends on several factors, such as the target material, the energy level of excited states responsible for the emission, and the type of enhancement process considered. Depending on the specified parameter, the enhancement effects were observed on different time scales ranging from the picosecond time level (e.g., ion yield, ablation mass) up to the hundred microsecond level (e.g., increased emission intensity for laser induced breakdown spectroscopy of submerged metal target in water). Several suggestions have been proposed to explain

  20. Laser safety and practice

    International Nuclear Information System (INIS)

    Low, K.S.

    1995-01-01

    Lasers are finding increasing routine applications in many areas of science, medicine and industry. Though laser radiation is non-ionizing in nature, the usage of high power lasers requires specific safety procedures. This paper briefly outlines the properties of laser beams and various safety procedures necessary in their handling and usage. (author)

  1. Laser Applications in Orthodontics

    Science.gov (United States)

    Heidari, Somayeh; Torkan, Sepideh

    2013-01-01

    A laser is a collimated single wavelength of light which delivers a concentrated source of energy. Soon after different types of lasers were invented, investigators began to examine the effects of different wavelengths of laser energy on oral tissues, routine dental procedures and experimental applications. Orthodontists, along with other specialist in different fields of dentistry, can now benefit from several different advantages that lasers provide during the treatment process, from the beginning of the treatment, when separators are placed, to the time of resin residues removal from the tooth surface at the end of orthodontic treatment. This article outlines some of the most common usages of laser beam in orthodontics and also provides a comparison between laser and other conventional method that were the standard of care prior to the advent of laser in this field. PMID:25606324

  2. Lasers in materials science

    CERN Document Server

    Ossi, Paolo; Zhigilei, Leonid

    2014-01-01

    This book covers various aspects of lasers in materials science, including a comprehensive overview on basic principles of laser-materials interactions and applications enabled by pulsed laser systems.  The material is organized in a coherent way, providing the reader with a harmonic architecture. While systematically covering the major current and emerging areas of lasers processing applications, the Volume provides examples of targeted modification of material properties achieved through careful control of the processing conditions and laser irradiation parameters. Special emphasis is placed on specific strategies aimed at nanoscale control of material structure and properties to match the stringent requirements of modern applications.  Laser fabrication of novel nanomaterials, which expands to the domains of photonics, photovoltaics, sensing, and biomedical applications, is also discussed in the Volume. This book assembles chapters based on lectures delivered at the Venice International School on Lasers...

  3. Laser-powered lunar base

    International Nuclear Information System (INIS)

    Costen, R.; Humes, D.H.; Walker, G.H.; Williams, M.D.; Deyoung, R.J.

    1989-01-01

    The objective was to compare a nuclear reactor-driven Sterling engine lunar base power source to a laser-to-electric converter with orbiting laser power station, each providing 1 MW of electricity to the lunar base. The comparison was made on the basis of total mass required in low-Earth-orbit for each system. This total mass includes transportation mass required to place systems in low-lunar orbit or on the lunar surface. The nuclear reactor with Sterling engines is considered the reference mission for lunar base power and is described first. The details of the laser-to-electric converter and mass are discussed. The next two solar-driven high-power laser concepts, the diode array laser or the iodine laser system, are discussed with associated masses in low-lunar-orbit. Finally, the payoff for laser-power beaming is summarized

  4. Teorias utilizadas nas investigações sobre gestão do conhecimento

    Directory of Open Access Journals (Sweden)

    Luiza A. O. P. Xavier

    2012-12-01

    Full Text Available A gestão do conhecimento tem sido reconhecida por pesquisadores e usuários como crucial para o crescimento e desenvolvimento das organizações. A área de Sistemas de Informação contribui com investigações sobre gestão do conhecimento. Este artigo tem como objetivo identificar as principais teorias que foram utilizadas nas investigações sobre a gestão do conhecimento, considerando as teorias relacionadas com a área de sistemas de informação. As teorias identificadas em cerca de 40% dos artigos analisados são: Game Theory, Social Capital Theory, Theory of Planned Behavior, Social Exchange Theory, Dynamic Capabilities e Theory of Reasoned Action. Observou-se que as teorias são utilizadas tanto em investigações sobre gestão do conhecimento, como em pesquisas sobre uma das etapas do seu processo, ou seja, o compartilhamento do conhecimento. Destaca-se também que determinado aspecto da gestão do conhecimento, por exemplo, antecedente do compartilhamento de conhecimento, pode ser investigado utilizando diferentes teorias.

  5. Fast-electron-relaxation measurement for laser-solid interaction at relativistic laser intensities

    International Nuclear Information System (INIS)

    Chen, H.; Shepherd, R.; Chung, H. K.; Kemp, A.; Hansen, S. B.; Wilks, S. C.; Ping, Y.; Widmann, K.; Fournier, K. B.; Beiersdorfer, P.; Dyer, G.; Faenov, A.; Pikuz, T.

    2007-01-01

    We present measurements of the fast-electron-relaxation time in short-pulse (0.5 ps) laser-solid interactions for laser intensities of 10 17 , 10 18 , and 10 19 W/cm 2 , using a picosecond time-resolved x-ray spectrometer and a time-integrated electron spectrometer. We find that the laser coupling to hot electrons increases as the laser intensity becomes relativistic, and that the thermalization of fast electrons occurs over time scales on the order of 10 ps at all laser intensities. The experimental data are analyzed using a combination of models that include Kα generation, collisional coupling, and plasma expansion

  6. Research of time fiducial and imaging VISAR laser for Shenguang-III laser facility

    Science.gov (United States)

    Zhang, Rui; Wang, Zhenguo; Tian, Xiaocheng; Zhou, Dandan; Zhu, Na; Wang, Jianjun; Li, Mingzhong; Xu, Dangpeng; Dang, Zhao; Hu, Dongxia; Zhu, Qihua; Zheng, Wanguo; Wang, Feng

    2015-10-01

    Time fiducial laser is an important tool for the precise measurement in high energy density physics experiments. The VISAR probe laser is also vital for shock wave diagnostics in ICF experiments. Here, time fiducial laser and VISAR light were generated from one source on SG-III laser facility. After generated from a 1064-nm DFB laser, the laser is modulated by an amplitude modulator driven by 10 GS/s arbitrary waveform generator. Using time division multiplexing technology, the ten-pulse time fiducial laser and the 20-ns VISAR pulse were split by a 1×2 multiplexer and then chosen by two acoustic optic modulators. Using the technique, cost of the system was reduced. The technologies adopted in the system also include pulse polarization stabilization, high precision fiber coupling and energy transmission. The time fiducial laser generated synchronized 12-beam 2ω and 4-beam 3ω laser, providing important reference marks for different detectors and making it convenient for the analysis of diagnostic data. After being amplified by fiber amplifiers and Nd:YAG rod amplifiers, the VISAR laser pulse was frequency-converted to 532-nm pulse by a thermally controlled LBO crystal with final output energy larger than 20 mJ. Finally, the green light was coupled into a 1-mm core diameter, multimode fused silica optical fiber and propagated to the imaging VISAR. The VISAR laser has been used in the VISAR diagnostic physics experiments. Shock wave loading and slowdown processes were measured. Function to measure velocity history of shock wave front movement in different kinds of materials was added to the SG-III laser facility.

  7. Laser antisepsis of Phorphyromonas gingivalis in vitro with dental lasers

    Science.gov (United States)

    Harris, David M.

    2004-05-01

    It has been shown that both pulsed Nd:YAG (1064nm) and continuous diode (810nm) dental lasers kill pathogenic bacteria (laser antisepsis), but a quantitative method for determining clinical dosimetry does not exist. The purpose of this study was to develop a method to quantify the efficacy of ablation of Porphyromonas gingivalis (Pg) in vitro for two different lasers. The ablation thresholds for the two lasers were compared in the following manner. The energy density was measured as a function of distance from the output of the fiber-optic delivery system. Pg cultures were grown on blood agar plates under standard anaerobic conditions. Blood agar provides an approximation of gingival tissue for the wavelengths tested in having hemoglobin as a primary absorber. Single pulses (Nd:YAG: 100- Œs diode: 100-msec) of laser energy were delivered to Pg colonies and the energy density was increased until the appearance of a small plume was observed coincident with a laser pulse. The energy density at this point defines the ablation threshold. Ablation thresholds to a single pulse were determined for both Pg and for blood agar alone. The large difference in ablation thresholds between the pigmented pathogen and the host matrix for pulsed-Nd:YAG represented a significant therapeutic ratio and Pg was ablated without visible effect on the blood agar. Near threshold the 810-nm diode laser destroyed both the pathogen and the gel. Clinically, the pulsed Nd:YAG may selectively destroy pigmented pathogens leaving the surrounding tissue intact. The 810-nm diode laser may not demonstrate this selectivity due to its longer pulse length and greater absorption by hemoglobin.

  8. Algunos relatos sobre santería, magia y etnomedicina en Cuba

    OpenAIRE

    Carrascosa Palomera, Cruz

    2008-01-01

    Este artículo presenta una colección de relatos sobre santería, magia y etnomedicina en Cuba. Incluye información sobre ritos y prácticas de iniciación, de purificación, de curación. This paper offers a selection of stories about santería, magic and folk medicine in Cuba. Includes reports on iniciation, purification and curation rites and practices

  9. Latest development of laser cutting

    OpenAIRE

    Wetzig, Andreas; Herwig, Patrick; Hauptmann, Jan; Goppold, Cindy; Baumann, Robert; Fürst, Andreas; Rose, Michael; Pinder, Thomas; Mahrle, Achim; Beyer, Eckhard

    2016-01-01

    Laser cutting was one of the first applications of laser material processing. Today, laser cutting is the most widespread application among laser material processing besides laser marking. Meanwhile, nearly each material can be cut by means of a laser, in particular since ultra short pulse lasers are available in the power range of up to 100 W. The to be cut material can come with thicknesses from a few microns till tens of millimeters as flat stock or as free form shapes. The paper will conc...

  10. High power lasers

    CERN Document Server

    Niku-Lari, A

    1989-01-01

    The use of lasers for the working and treatment of materials is becoming increasingly common in industry. However, certain laser applications, for example, in welding, cutting and drilling, are more widely exploited than others. Whilst the potential of lasers for the surface treatment of metals is well recognised, in practice, this particular application is a relative newcomer. The 24 papers in this volume present the latest research and engineering developments in the use of lasers for processes such as surface melting, surface alloying and cladding, and machining, as well as discussing th

  11. Performance of a 200-J KrF laser amplifier for laser fusion research

    International Nuclear Information System (INIS)

    Owadano, Y.; Okuda, I.; Tanimoto, M.; Kasai, T.; Matsumoto, Y.; Yaoita, A.; Nemoto, F.; Komeiji, S.; Yano, M.

    1986-01-01

    An e-beam-pumped KrF laser has been developed as a middle-stage amplifier of a 1-kJ system for laser fusion research. The laser consists of one Marx generator (1MV, 11kJ), two PFLs (4.6 Ω, 100ns) with laser triggered output switches, two e-beam diodes (10 X 60 cm/sup 2/), and a laser cell (20- X 20- X 60-cm/sup 3/ active volume). Two e-beams are injected into the cell through carbon-sprayed Kapton anode and pressure foils. Up to now, a 120-J (70-ns) laser pulse has been generated with a 90% output coupling flat-flat resonator at 80% voltage operation. Overall efficiency is 1.5% in this case. A series of experiments has been performed with the laser to measure gain characteristics of a Kr-rich mixture, which is predicted to be more efficient than a normal Ar mixture in a high-laser-intensity region (>10 MW cm/sup -2/). An injection-locked oscillator mode was used to obtain a well-defined high-intensity laser beam, and a saturated intracavity intensity was measured

  12. Fluorescence-pumped photolytic gas laser system for a commercial laser fusion power plant

    International Nuclear Information System (INIS)

    Monsler, M.J.

    1977-01-01

    The first results are given for the conceptual design of a short-wavelength gas laser system suitable for use as a driver (high average power ignition source) for a commercial laser fusion power plant. A comparison of projected overall system efficiencies of photolytically excited oxygen, sulfur, selenium and iodine lasers is described, using a unique windowless laser cavity geometry which will allow scaling of single amplifier modules to 125 kJ per aperture for 1 ns pulses. On the basis of highest projected overall efficiency, a selenium laser is chosen for a conceptual power plant fusion laser system. This laser operates on the 489 nm transauroral transition of selenium, excited by photolytic dissociation of COSe by ultraviolet fluorescence radiation. Power balances and relative costs for optics, electrical power conditioning and flow conditioning of both the laser and fluorescer gas streams are discussed for a system with the following characteristics: 8 operating modules, 2 standby modules, 125 kJ per module, 1.4 pulses per second, 1.4 MW total average power. The technical issues of scaling visible and near-infrared photolytic gas laser systems to this size are discussed

  13. Laser lipolysis: skin tightening in lipoplasty using a diode laser.

    Science.gov (United States)

    Wolfenson, Moisés; Hochman, Bernardo; Ferreira, Lydia Massako

    2015-05-01

    New devices have been developed for surgical repair of deformities caused by localized fat deposits associated with skin laxity. The use of these devices requires the adoption of safety parameters. The aim of this study was to investigate skin tightening by laser lipolysis, using a dual-wavelength diode laser. This prospective, cross-sectional study was conducted between June of 2008 and July of 2010 with 41 consecutive patients who underwent laser lipolysis to correct contour deformities. Laser lipolysis was performed with a diode laser operating at two wavelengths (924 and 975 nm) controlled independently, and using three different tip lengths, allowing treatment of small, medium, and large areas of adipose tissue. The procedure was performed under local anesthesia in a surgical setting. To calculate the optimal cumulative energy, a total energy dose of 5 kJ/10 × 10-cm skin area was used as a safety parameter to prevent treatment complications. The circumferences of body regions were measured preoperatively, immediately after surgery, and 90 days later. Measurements were compared using the Wilcoxon test at a significance level of 0.05 (p Laser lipolysis results in progressive skin tightening over time. Therapeutic, IV.

  14. Theoretical and experimental aspects of laser cutting with a direct diode laser

    Science.gov (United States)

    Costa Rodrigues, G.; Pencinovsky, J.; Cuypers, M.; Duflou, J. R.

    2014-10-01

    Recent developments in beam coupling techniques have made it possible to scale up the power of diode lasers with a laser beam quality suitable for laser cutting of metal sheets. In this paper a prototype of a Direct Diode Laser (DDL) source (BPP of 22 mm-mrad) is analyzed in terms of efficiency and cut performance and compared with two established technologies, CO2 and fiber lasers. An analytical model based on absorption calculations is used to predict the performance of the studied laser source with a good agreement with experimental results. Furthermore results of fusion cutting of stainless steel and aluminium alloys as well as oxygen cutting of structural steel are presented, demonstrating that industrial relevant cutting speeds with high cutting quality can now be achieved with DDL.

  15. Note: Digital laser frequency auto-locking for inter-satellite laser ranging.

    Science.gov (United States)

    Luo, Yingxin; Li, Hongyin; Yeh, Hsien-Chi

    2016-05-01

    We present a prototype of a laser frequency auto-locking and re-locking control system designed for laser frequency stabilization in inter-satellite laser ranging system. The controller has been implemented on field programmable gate arrays and programmed with LabVIEW software. The controller allows initial frequency calibrating and lock-in of a free-running laser to a Fabry-Pérot cavity. Since it allows automatic recovery from unlocked conditions, benefit derives to automated in-orbit operations. Program design and experimental results are demonstrated.

  16. Note: Digital laser frequency auto-locking for inter-satellite laser ranging

    International Nuclear Information System (INIS)

    Luo, Yingxin; Yeh, Hsien-Chi; Li, Hongyin

    2016-01-01

    We present a prototype of a laser frequency auto-locking and re-locking control system designed for laser frequency stabilization in inter-satellite laser ranging system. The controller has been implemented on field programmable gate arrays and programmed with LabVIEW software. The controller allows initial frequency calibrating and lock-in of a free-running laser to a Fabry-Pérot cavity. Since it allows automatic recovery from unlocked conditions, benefit derives to automated in-orbit operations. Program design and experimental results are demonstrated.

  17. Note: Digital laser frequency auto-locking for inter-satellite laser ranging

    Energy Technology Data Exchange (ETDEWEB)

    Luo, Yingxin; Yeh, Hsien-Chi, E-mail: yexianji@mail.hust.edu.cn [MOE Key Laboratory of Fundamental Quantities Measurement, School of Physics, Huazhong University of Science and Technology, Wuhan 430074 (China); Li, Hongyin [MOE Key Laboratory of Fundamental Quantities Measurement, School of Physics, Huazhong University of Science and Technology, Wuhan 430074 (China); School of Automation, Huazhong University of Science and Technology, Wuhan 430074 (China)

    2016-05-15

    We present a prototype of a laser frequency auto-locking and re-locking control system designed for laser frequency stabilization in inter-satellite laser ranging system. The controller has been implemented on field programmable gate arrays and programmed with LabVIEW software. The controller allows initial frequency calibrating and lock-in of a free-running laser to a Fabry-Pérot cavity. Since it allows automatic recovery from unlocked conditions, benefit derives to automated in-orbit operations. Program design and experimental results are demonstrated.

  18. CO2 laser and plasma microjet process for improving laser optics

    Science.gov (United States)

    Brusasco, Raymond M.; Penetrante, Bernardino M.; Butler, James A.; Grundler, Walter; Governo, George K.

    2003-09-16

    A optic is produced for operation at the fundamental Nd:YAG laser wavelength of 1.06 micrometers through the tripled Nd:YAG laser wavelength of 355 nanometers by the method of reducing or eliminating the growth of laser damage sites in the optics by processing the optics to stop damage in the optics from growing to a predetermined critical size. A system is provided of mitigating the growth of laser-induced damage in optics by virtue of very localized removal of glass and absorbing material.

  19. Laser wakefield acceleration

    International Nuclear Information System (INIS)

    Esarey, E.; Ting, A.; Sprangle, P.

    1989-01-01

    The laser wakefield accelerator (LWFA) is a novel plasma based electron acceleration scheme which utilizes a relativistic optical guiding mechanism for laser pulse propagation. In the LWFA, a short, high power, single frequency laser pulse is propagated through a plasma. As the laser pulse propagates, its radial and axial ponderomotive forces nonresonantly generate large amplitude plasma waves (wakefields) with a phase velocity equal to the group velocity of the pulse. A properly phased electron bunch may then be accelerated by the axial wakefield and focused by the transverse wakefield. Optical guiding of the laser pulse in the plasma is necessary in order to achieve high energies in a single stage of acceleration. At sufficiently high laser powers, optical guiding may be achieved through relativistic effects associated with the plasma electrons. Preliminary analysis indicates that this scheme may overcome some of the difficulties present in the plasma beat wave accelerator and in the plasma wakefield accelerator. Analytical and numerical calculations are presented which study both laser pulse propagation within a plasma as well as the subsequent generation of large amplitude plasma waves. In addition, the generation of large amplitude plasma waves in regimes where the plasma waves become highly nonlinear is examined

  20. Synergistic skin heat shock protein expression in response to combined laser treatment with a diode laser and ablative fractional lasers.

    Science.gov (United States)

    Paasch, Uwe; Sonja, Grunewald; Haedersdal, Merete

    2014-06-01

    Diode laser-based skin heating has been shown to minimise scars by interfering with wound healing responses through the induction of heat shock proteins (HSP). HSP are also induced after ablative fractional laser (AFXL) wound healing. AFXL itself is highly recommended for scar treatment. Therefore, the sequential combination of both modalities may produce superior outcomes. The aim of this study was to examine the pretreatment effects of a diode laser before AFXL on wound healing responses in terms of HSP up-regulation in an in vitro model. Immediate responses and responses on days 1, 3 or 6 post-procedure were studied in an in vitro porcine skin model (n = 240). Untreated samples served as control. Immunohistochemical investigation (Hsp70) was performed in all untreated controls, diode laser-, AFXL-, and in diode laser + AFXL-treated samples. Hsp70 was shown to be up-regulated by all interventions between days 1 and 6 after interventions. The largest effect was caused by the combination of a diode laser and an AFXL procedure. Diode laser exposure induces a skin HSP response that can be further enhanced by sequential AFXL treatment. Clinical studies are necessary to investigate the dose response of HSP on scar formation and refine suitable laser exposure settings.

  1. Development and characterization of femtosecond laser driven soft x-ray lasers

    International Nuclear Information System (INIS)

    Bettaibi, I.

    2005-06-01

    Coherent soft x-ray sources have an important potential for scientific, medical and industrial applications. The development of high intensity laser systems allowed the realization of new coherent and fast soft x-ray sources like high order harmonic generation and soft x-ray lasers. These sources are compact, cheaper than traditional sources such as synchrotrons, and are thus interesting. This thesis presents the study of a new soft x-ray laser pumped by a femto-second laser beam working at 10 Hz. The circularly polarized ultra intense laser is longitudinally focused in a cell filled with xenon or krypton, to obtain the amplification of two lasing lines at 41.8 nm and 32.8 nm in Pd-like xenon and Ni-like krypton respectively. We carry out an experimental and numerical study of the source to understand the importance of different parameters such as the laser intensity and polarization, the gas pressure and the cell length. We have also spatially and temporally characterized the soft x-ray laser beam. To compensate the refraction of the driving laser we have investigated guiding techniques consisting in creating a plasma channel by electric discharge or using the multiple reflections of the driving laser on the internal walls of the dielectric tubes of sapphire or glass. A spectacular improvement of the source performances has been observed in both cases. Finally, we present a preliminary study on a different x-ray scheme: the inner shell photo pumping of neutral atoms. We have developed an optical system, which should create the appropriate conditions for the realisation of short wavelength x-ray amplifier. (author)

  2. Incidencia de los fertilizantes sobre el pH del suelo

    OpenAIRE

    Ginés, Irantzu; Mariscal Sancho, Ignacio de Loyola

    2002-01-01

    El pH del suelo o del sustrato de cultivo determina la asimilabilidad de los nutrientes; los fertilizantes tienen una importante influencia sobre dicho pH. La incidencia de los fertilizantes sobre el pH del suelo depende principalmente de: a) el perfil acidificante de la composición química del fertilizante utilizado b) de su carácter descalcificante o calcificante y c) de la capacidad tamponadora del suelo. En esta monografía se recogen la incidencia de los principales fertilizantes comercia...

  3. New photoionization lasers pumped by laser-induced plasma radiation

    International Nuclear Information System (INIS)

    Hube, M.; Dieckmann, M.; Beigang, R.; Welling, H.; Wellegehausen, B.

    1988-01-01

    Innershell photoionization of atomic gases and vapors by soft x rays from a laser-produced plasma is a potential method for making lasers at short wavelengths. Normally, in such experiments only a single plasma spot or plasma line is created for the excitation. This gives high excitation rates but only a short excitation length. At high excitation rates detrimental influences, such as amplified spontaneous emission, optical saturation, or quenching processes, may decrease or even destroy a possible inversion. Therefore, it seems to be more favorable to use a number of separated plasma spots with smaller excitation rates and larger excitation lengths. As a test, a three-plasma spot device was constructed and used in the well-known Cd-photoionization laser at 442 nm. With a 600-mJ Nd:YAH laser (pulse length, 8 ns) for plasma production, output energies up to 300 μJ have been measured, which is more than a doubling of so far obtained data. On innershell excitation, levels may be populated that allow direct lasers as in the case of Cd or that are metastable and cannot be directly coupled to lower levels. In this case modifications in the excitation process are necessary. Such modifications may be an optical pump process in the atom prior to the innershell photoionization or an optical pump process (population transfer process) after the innershell ionization, leading to Raman or anti-Stokes Raman-type laser emissions. With these techniques and the developed multiplasma spot excitation device a variety of new laser emissions in K and Cs ions have been achieved which are indicated in the level schemes

  4. EXTRATO DE CHÁ VERDE (Camellia sinensis PROMOVE AÇÃO ANTIMICROBIANA SOBRE Staphylococcus aureus

    Directory of Open Access Journals (Sweden)

    Leandro Wagner Figueira

    2017-01-01

    Full Text Available É de grande importância ampliar as pesquisas científicas com plantas medicinais sobre micro-organismos. Foi verificado o efeito antimicrobiano do extrato de C. sinensis , sobre cultura planctônica e biofilme de S. aureus. Neste estudo foi verificada ação do extrato entre 50 a 0,09 mg/mL sobre cultura planctônica, para determinação da CIM e CBM. A ação do extrato sobre biofilme foi analisada pela exposição de 5 min ao produto vegetal a 200mg/mL. Foi utilizado o método de MTT para determinar a redução da viabilidade do biofilme. Nos grupos controles foram utilizadas clorexidina (+ e solução salina (-, sendo n = 12/grupo. A redução do biofilme foi analisada por ANOVA e Tukey Test (p ≤ 0,05. Em cultura planctônica as concentrações avaliadas não foram efetivas, contudo, utilizando-se a concentração de 200 mg/mL sobre o biofilme, foi verificada redução significativa. Com isso, concluiu-se que o extrato de chá verde demonstrou ação sobre biofilme de S. aureus provendo redução significativa em sua viabilidade.

  5. Estrategia educativa sobre sexualidad sana en adolescentes

    Directory of Open Access Journals (Sweden)

    Carmen Olivera Carmenates

    Full Text Available Se realizó un estudio de intervención con el objetivo de elaborar una estrategia educativa para incrementar conocimientos sobre sexualidad sana en un grupo de adolescentes de la escuela Secundaria Básica Alfredo Gómez del Municipio Camagüey entre octubre de 2012 y febrero de 2013. La muestra fue de 37 estudiantes. Se aplicó una encuesta que se convirtió en el registro primario de datos, confeccionada según criterios de expertos y la bibliografía. Una vez analizados los resultados se procedió a diseñar la estrategia educativa y posteriormente a su evaluación. Los datos se procesaron de forma automatizada. Antes de aplicar la estrategia educativa se comprobó que los adolescentes no tenían un adecuado conocimiento sobre la sexualidad sana. Los resultados demuestran la importancia de los estudios de intervención.

  6. Laser spectroscopy

    CERN Document Server

    Demtröder, Wolfgang

    Keeping abreast of the latest techniques and applications, this new edition of the standard reference and graduate text on laser spectroscopy has been completely revised and expanded. While the general concept is unchanged, the new edition features a broad array of new material, e.g., ultrafast lasers (atto- and femto-second lasers) and parametric oscillators, coherent matter waves, Doppler-free Fourier spectroscopy with optical frequency combs, interference spectroscopy, quantum optics, the interferometric detection of gravitational waves and still more applications in chemical analysis, medical diagnostics, and engineering.

  7. Laser induced nuclear reactions

    International Nuclear Information System (INIS)

    Ledingham, Ken; McCanny, Tom; Graham, Paul; Fang Xiao; Singhal, Ravi; Magill, Joe; Creswell, Alan; Sanderson, David; Allott, Ric; Neely, David; Norreys, Peter; Santala, Marko; Zepf, Matthew; Watts, Ian; Clark, Eugene; Krushelnick, Karl; Tatarakis, Michael; Dangor, Bucker; Machecek, Antonin; Wark, Justin

    1998-01-01

    Dramatic improvements in laser technology since 1984 have revolutionised high power laser technology. Application of chirped-pulse amplification techniques has resulted in laser intensities in excess of 10 19 W/cm 2 . In the mid to late eighties, C. K. Rhodes and K. Boyer discussed the possibility of shining laser light of this intensity onto solid surfaces and to cause nuclear transitions. In particular, irradiation of a uranium target could induce electro- and photofission in the focal region of the laser. In this paper it is shown that μCi of 62 Cu can be generated via the (γ,n) reaction by a laser with an intensity of about 10 19 Wcm -2

  8. Temperature stabilization of injection lasers

    International Nuclear Information System (INIS)

    Albanese, A.

    1987-01-01

    Apparatus which stabilizes the temperature, and thereby the output wavelength, of an injection laser. Means monitor the laser terminal voltage across a laser and derive a voltage therefrom which is proportional to the junction voltage of the laser. Means compares the voltage to a reference value from source and a temperature controller adjusts the laser temperature in response to the results of the comparison. Further embodiments of the present invention vary the output wavelength of the laser by varying the reference value from source against which the laser junction voltage is compared. (author)

  9. IceBridge Riegl Laser Altimeter L1B Time-Tagged Laser Ranges

    Data.gov (United States)

    National Aeronautics and Space Administration — The NASA IceBridge Riegl Laser Altimeter L1B Time-Tagged Laser Ranges (ILUTP1B) data set contains laser ranges, returned pulses, and deviation for returned pulses in...

  10. New-laser research and development

    International Nuclear Information System (INIS)

    Anon.

    1978-01-01

    Two new-laser research efforts were initiated during the reporting period; the chemically pumped iodine laser and HgXe exciplex excitation by electric discharge. The chemically pumped iodine laser was recently discovered by personnel at the Air Force Weapons Laboratory. The laser offers exciting possibilities as an ICF driver because it does not require a capital-intensive pulse power source to drive it, and up to 10% efficiency may be possible. Modeling studies of the laser are in progress and its potential as a high-average power laser seems to be very favorable at this time. The HgXe exciplex radiates in a band centered at 265 nm. This system is being studied because it could be used to pump an iodine laser. Its potential as a high-power laser candidate will be assessed. An advanced oscillator system based upon a microprocessor-controlled Nd:YAG-pumped pulsed dye laser is being developed so that it can be used as the front end of new laser-fusion lasers and utilized in testing and making germane laser amplifier measurements of candidate laser systems for the wavelength region of 4000 A to 8000 A and extended range with frequency doubling and mixing. The operating requirements of the oscillator system include long-term stability, high reliability, absolute wavelength calibration and control, tunability, hands-off operation, and variable pulse width generation in the nanosecond regime

  11. D2O laser pumped by an injection-locked CO2 laser for ion-temperature measurements

    International Nuclear Information System (INIS)

    Okada, Tatsuo; Ohga, Tetsuaki; Yokoo, Masakazu; Muraoka, Katsunori; Akazaki, Masanori.

    1986-01-01

    The cooperative Thomson scattering method is one of the various new techniques proposed for measuring the temperature of ions in nuclear fusion critical plasma, for which a high-performance FIR laser pumped by an injection-locked CO 2 laser is required. This report deals with D 2 O laser with a wavelength of 385 μm which is pumped by injection-locked single-mole TEA CO 2 laser composed of a driver laser and an output-stage laser. A small-sized automatic pre-ionization type laser is employed for the driver. The resonator of the driver laser consists of a plane grating of littrow arrangement and ZnSe plane output mirrors with reflection factor of 50 %. An aperture and ZnSe etalon are inserted in the resonator to produce single transverse- and longitudinal-mode oscillation, respectively. The output-stage laser is also of the automatic pre-ionization type. Theoretically, an injection power of 0.1 pW/mm 3 is required for a CO 2 laser. Single-mode oscillation of several hundred nW/mm 3 can be produced by the CO 2 laser used in this study. Tuning of the output-stage laser is easily controlled by the driver laser. High stability of the injection-locked operation is demonstrated. CO 2 laser beam is introduced into the D 2 O laser through a KCl window to excite D 2 O laser beam in the axial direction. Input and output characteristics of the D 2 O laser are shown. Also presented are typical pulse shapes from the D 2 O laser pumped by a free-running CO 2 laser pulse or by an injection-locked single-mode CO 2 laser pulse. (Nogami, K.)

  12. Diode lasers and arrays

    International Nuclear Information System (INIS)

    Streifer, W.

    1988-01-01

    This paper discusses the principles of operation of III-V semiconductor diode lasers, the use of distributed feedback, and high power laser arrays. The semiconductor laser is a robust, miniature, versatile device, which directly converts electricity to light with very high efficiency. Applications to pumping solid-state lasers and to fiber optic and point-to-point communications are reviewed

  13. Trends in laser micromachining

    Science.gov (United States)

    Gaebler, Frank; van Nunen, Joris; Held, Andrew

    2016-03-01

    Laser Micromachining is well established in industry. Depending on the application lasers with pulse length from μseconds to femtoseconds and wavelengths from 1064nm and its harmonics up to 5μm or 10.6μm are used. Ultrafast laser machining using pulses with pico or femtosecond duration pulses is gaining traction, as it offers very precise processing of materials with low thermal impact. Large-scale industrial ultrafast laser applications show that the market can be divided into various sub segments. One set of applications demand low power around 10W, compact footprint and are extremely sensitive to the laser price whilst still demanding 10ps or shorter laser pulses. A second set of applications are very power hungry and only become economically feasible for large scale deployments at power levels in the 100+W class. There is also a growing demand for applications requiring fs-laser pulses. In our presentation we would like to describe these sub segments by using selected applications from the automotive and electronics industry e.g. drilling of gas/diesel injection nozzles, dicing of LED substrates. We close the presentation with an outlook to micromachining applications e.g. glass cutting and foil processing with unique new CO lasers emitting 5μm laser wavelength.

  14. Insuficiencia normativa sobre roles y funciones para los miembros de la Fuerza Pública

    OpenAIRE

    Morales Hernández, Martha Lizett; Ruiz, Jesus A.

    2016-01-01

    Atendiendo al interés de conocer la manera en que se han manejado en Colombia las políticas sobre Seguridad y Defensa Nacional, respecto de la seguridad jurídica de los miembros de la Fuerza Pública, el presente artículo bajo el método bibliográfico e histórico, plantea en su primera parte, la manera en que los gobiernos elegidos a partir de la Constitución de 1991, concibieron la Seguridad y la Defensa, así como sus políticas sobre este particular; posteriormente, se estudian las normas sobr...

  15. Quality and performance of laser cutting with a high power SM fiber laser

    DEFF Research Database (Denmark)

    Kristiansen, Morten; Selchau, Jacob; Olsen, F. O.

    2013-01-01

    The introduction of high power single mode fiber lasers allows for a beam of high power and a good beam quality factor (M2 ” 1.2), compared to the multimode fiber lasers often utilised in macro laser metal cutting. This paper describes fundamental studies of macro laser metal cutting with a singl...

  16. Laser Light: Using Laser Refractometry to Determine Concentration.

    Science.gov (United States)

    Gauger, Robert

    1995-01-01

    Laser refractometry is a science-technology-based activity that requires students to manipulate a variety of equipment, tools, materials, and critical-thinking skills. Students use a laser to measure the percent of glucose in a solution by calibrating the system, taking measurements, and computing the concentration. (MKR)

  17. Laser experimental system as teaching aid for demonstrating basic phenomena of laser feedback

    International Nuclear Information System (INIS)

    Xu, Ling; Zhao, Shijie; Zhang, Shulian

    2015-01-01

    An experimental laser teaching system is developed to demonstrate laser feedback phenomena, which bring great harm to optical communication and benefits to precision measurement. The system consists of an orthogonally polarized He-Ne laser, a feedback mirror which reflects the laser output light into the laser cavity, and an optical attenuator which changes the intensity of the feedback light. As the feedback mirror is driven by a piezoelectric ceramic, the attenuator is adjusted and the feedback mirror is tilted, the system can demonstrate many basic laser feedback phenomena, including weak, moderate and strong optical feedback, multiple feedback and polarization flipping. Demonstrations of these phenomena can give students a better understanding about the intensity and polarization of lasers. The system is well designed and assembled, simple to operate, and provides a valuable teaching aid at an undergraduate level. (paper)

  18. Micromachining with copper lasers

    Science.gov (United States)

    Knowles, Martyn R. H.; Bell, Andy; Foster-Turner, Gideon; Rutterford, Graham; Chudzicki, J.; Kearsley, Andrew J.

    1997-04-01

    In recent years the copper laser has undergone extensive development and has emerged as a leading and unique laser for micromachining. The copper laser is a high average power (10 - 250 W), high pulse repetition rate (2 - 32 kHz), visible laser (511 nm and 578 nm) that produces high peak power (typically 200 kW), short pulses (30 ns) and very good beam quality (diffraction limited). This unique set of laser parameters results in exceptional micro-machining in a wide variety of materials. Typical examples of the capabilities of the copper laser include the drilling of small holes (10 - 200 micrometer diameter) in materials as diverse as steel, ceramic, diamond and polyimide with micron precision and low taper (less than 1 degree) cutting and profiling of diamond. Application of the copper laser covers the electronic, aerospace, automotive, nuclear, medical and precision engineering industries.

  19. ORION laser target diagnostics

    International Nuclear Information System (INIS)

    Bentley, C. D.; Edwards, R. D.; Andrew, J. E.; James, S. F.; Gardner, M. D.; Comley, A. J.; Vaughan, K.; Horsfield, C. J.; Rubery, M. S.; Rothman, S. D.; Daykin, S.; Masoero, S. J.; Palmer, J. B.; Meadowcroft, A. L.; Williams, B. M.; Gumbrell, E. T.; Fyrth, J. D.; Brown, C. R. D.; Hill, M. P.; Oades, K.

    2012-01-01

    The ORION laser facility is one of the UK's premier laser facilities which became operational at AWE in 2010. Its primary mission is one of stockpile stewardship, ORION will extend the UK's experimental plasma physics capability to the high temperature, high density regime relevant to Atomic Weapons Establishment's (AWE) program. The ORION laser combines ten laser beams operating in the ns regime with two sub ps short pulse chirped pulse amplification beams. This gives the UK a unique combined long pulse/short pulse laser capability which is not only available to AWE personnel but also gives access to our international partners and visiting UK academia. The ORION laser facility is equipped with a comprehensive suite of some 45 diagnostics covering optical, particle, and x-ray diagnostics all able to image the laser target interaction point. This paper focuses on a small selection of these diagnostics.

  20. ORION laser target diagnostics.

    Science.gov (United States)

    Bentley, C D; Edwards, R D; Andrew, J E; James, S F; Gardner, M D; Comley, A J; Vaughan, K; Horsfield, C J; Rubery, M S; Rothman, S D; Daykin, S; Masoero, S J; Palmer, J B; Meadowcroft, A L; Williams, B M; Gumbrell, E T; Fyrth, J D; Brown, C R D; Hill, M P; Oades, K; Wright, M J; Hood, B A; Kemshall, P

    2012-10-01

    The ORION laser facility is one of the UK's premier laser facilities which became operational at AWE in 2010. Its primary mission is one of stockpile stewardship, ORION will extend the UK's experimental plasma physics capability to the high temperature, high density regime relevant to Atomic Weapons Establishment's (AWE) program. The ORION laser combines ten laser beams operating in the ns regime with two sub ps short pulse chirped pulse amplification beams. This gives the UK a unique combined long pulse/short pulse laser capability which is not only available to AWE personnel but also gives access to our international partners and visiting UK academia. The ORION laser facility is equipped with a comprehensive suite of some 45 diagnostics covering optical, particle, and x-ray diagnostics all able to image the laser target interaction point. This paper focuses on a small selection of these diagnostics.

  1. Laser safety in dentistry

    Science.gov (United States)

    Wigdor, Harvey A.

    1997-05-01

    One of the major causes of anxiety in the dental clinic is the dental handpiece. Because dentists wish to provide a method which can replace the drill there has often been a premature use of the laser in dentistry. Various lasers have been introduced into the clinic before research has shown the laser used is of clinical benefit. Any new treatment method must not compromise the health of the patient being treated. Thus a method of evaluating the clinical abilities of dentists and their understanding the limitations of the laser used must be developed. Dentist must be trained in the basic interaction of the laser on oral tissues. The training has to concentrate on the variation of the laser wavelength absorption in the different tissues of the oral cavity. Because of the differences in the optical properties of these tissues great care must be exercised by practitioners using lasers on patients.

  2. Lasers in tattoo and pigmentation control: role of the PicoSure(®) laser system.

    Science.gov (United States)

    Torbeck, Richard; Bankowski, Richard; Henize, Sarah; Saedi, Nazanin

    2016-01-01

    The use of picosecond lasers to remove tattoos has greatly improved due to the long-standing outcomes of nanosecond lasers, both clinically and histologically. The first aesthetic picosecond laser available for this use was the PicoSure(®) laser system (755/532 nm). Now that a vast amount of research on its use has been conducted, we performed a comprehensive review of the literature to validate the continued application of the PicoSure(®) laser system for tattoo removal. A PubMed search was conducted using the term "picosecond" combined with "laser", "dermatology", and "laser tattoo removal". A total of 13 articles were identified, and ten of these met the inclusion criteria for this review. The majority of studies showed that picosecond lasers are an effective and safe treatment mode for the removal of tattoo pigments. Several studies also indicated potential novel applications of picosecond lasers in the removal of various tattoo pigments (eg, black, red, and yellow). Adverse effects were generally mild, such as transient hypopigmentation or blister formation, and were rarely more serious, such as scarring and/or textural change. Advancements in laser technologies and their application in cutaneous medicine have revolutionized the field of laser surgery. Computational modeling provides evidence that the optimal pulse durations for tattoo ink removal are in the picosecond domain. It is recommended that the PicoSure(®) laser system continue to be used for safe and effective tattoo removal, including for red and yellow pigments.

  3. Laser Therapy

    Science.gov (United States)

    ... for Every Season How to Choose the Best Skin Care Products In This Section Dermatologic Surgery What is dermatologic ... for Every Season How to Choose the Best Skin Care Products Laser Resurfacing Uses for Laser Resurfacing Learn more ...

  4. Performance of a high repetition pulse rate laser system for in-gas-jet laser ionization studies with the Leuven laser ion source LISOL

    International Nuclear Information System (INIS)

    Ferrer, R.; Sonnenschein, V.T.; Bastin, B.; Franchoo, S.; Huyse, M.; Kudryavtsev, Yu.; Kron, T.; Lecesne, N.; Moore, I.D.; Osmond, B.; Pauwels, D.; Radulov, D.; Raeder, S.; Rens, L.

    2012-01-01

    The laser ionization efficiency of the Leuven gas cell-based laser ion source was investigated under on- and off-line conditions using two distinctly different laser setups: a low-repetition rate dye laser system and a high-repetition rate Ti:sapphire laser system. A systematic study of the ion signal dependence on repetition rate and laser pulse energy was performed in off-line tests using stable cobalt and copper isotopes. These studies also included in-gas-jet laser spectroscopy measurements on the hyperfine structure of 63 Cu. A final run under on-line conditions in which the radioactive isotope 59 Cu (T 1/2 = 81.5 s) was produced, showed a comparable yield of the two laser systems for in-gas-cell ionization. However, a significantly improved time overlap by using the high-repetition rate laser system for in-gas-jet ionization was demonstrated by an increase of the overall duty cycle, and at the same time, pointed to the need for a better shaped atomic jet to reach higher ionization efficiencies.

  5. SANTO AGOSTINHO, UM CRISTÃO FILÓSOFO: SEU PENSAMENTO SOBRE DEUS E O HOMEM

    Directory of Open Access Journals (Sweden)

    Pe. Antonio Marcos Chagas

    2012-06-01

    Full Text Available Agostinho desenvolve uma reflexão organizada e uma síntese filosófico-religiosa de extraordinária força e beleza que influenciara significativamente todo o pensamento filosófico e teológico posterior. O presente trabalho abordará uma reflexão sobre o pensamento agostiniano sobre Deus, sobre o homem, o mal e uma reflexão sobre a história à luz da fé. A leitura feita por Agostinho destes temas desdobra uma abordagem focada na primazia da graça que permeia a vida humana e oferece possibilidades para sua plena realização enquanto liberdade consciente. O presente trabalho encontra nos originais agostinianos e nas publicações dos escritores especializados sua fonte de pesquisa.

  6. Laser Safety Inspection Criteria

    International Nuclear Information System (INIS)

    Barat, K

    2005-01-01

    A responsibility of the Laser Safety Officer (LSO) is to perform laser safety audits. The American National Standard Z136.1 Safe use of Lasers references this requirement in several sections: (1) Section 1.3.2 LSO Specific Responsibilities states under Hazard Evaluation, ''The LSO shall be responsible for hazards evaluation of laser work areas''; (2) Section 1.3.2.8, Safety Features Audits, ''The LSO shall ensure that the safety features of the laser installation facilities and laser equipment are audited periodically to assure proper operation''; and (3) Appendix D, under Survey and Inspections, it states, ''the LSO will survey by inspection, as considered necessary, all areas where laser equipment is used''. Therefore, for facilities using Class 3B and or Class 4 lasers, audits for laser safety compliance are expected to be conducted. The composition, frequency and rigueur of that inspection/audit rests in the hands of the LSO. A common practice for institutions is to develop laser audit checklists or survey forms. In many institutions, a sole Laser Safety Officer (LSO) or a number of Deputy LSO's perform these audits. For that matter, there are institutions that request users to perform a self-assessment audit. Many items on the common audit list and the associated findings are subjective because they are based on the experience and interest of the LSO or auditor in particular items on the checklist. Beam block usage is an example; to one set of eyes a particular arrangement might be completely adequate, while to another the installation may be inadequate. In order to provide more consistency, the National Ignition Facility Directorate at Lawrence Livermore National Laboratory (NIF-LLNL) has established criteria for a number of items found on the typical laser safety audit form. These criteria are distributed to laser users, and they serve two broad purposes: first, it gives the user an expectation of what will be reviewed by an auditor, and second, it is an

  7. Synchronisation of a femtosecond laser and a Q-switched laser to within 50 ps

    International Nuclear Information System (INIS)

    Katin, E V; Lozhkarev, V V; Palashov, O V; Khazanov, E A

    2003-01-01

    A Nd:YLF laser emitting 2-ns pulses synchronised with a femtosecond Cr:forsterite laser is built. The pulse duration and synchronisation are ensured by two Pockels cells, in which voltage pulses are synchronised with the femtosecond laser by fast emitter-coupled logic elements. One of the Pockels cells ensures Q-switching, while the other cuts a short pulse from a 15-ns Q-switched pulse. The experimental results show that the two-step scheme proposed for synchronisation of a Q-switched laser and a passively mode-locked laser provides quite simple and reliable synchronisation of these lasers with a jitter of a few tens of picoseconds. (control of laser radiation parameters)

  8. Introduction to laser technology

    CERN Document Server

    Hitz, C Breck; Hecht, Jeff; Hitz, C Breck; John Wiley & Sons

    2001-01-01

    Electrical Engineering Introduction to Laser Technology , Third Edition. Would you like to know how a laser works, and how it can be modified for your own specific tasks? This intuitive third edition-previously published as Understanding Laser Technology , First and Second Editions-introduces engineers, scientists, technicians, and novices alike to the world of modern lasers, without delving into the mathematical details of quantum electronics. It is the only introductory text on the market today that explains the underlying physics and engineering applicable to all lasers. A unique combinatio.

  9. The laser thermonuclear fusion

    International Nuclear Information System (INIS)

    Coutant, J.; Dautray, R.; Decroisette, M.; Watteau, J.P.

    1987-01-01

    Principle of the thermonuclear fusion by inertial confinement: required characteristics of the deuterium-tritium plasma and of the high power lasers to be used Development of high power lasers: active media used; amplifiers; frequency conversion; beam quality; pulse conditioning; existing large systems. The laser-matter interaction: collision and collective interaction of the laser radiation with matter; transport of the absorbed energy; heating and compression of deuterium-tritium; diagnoses and their comparison with the numerical simulation of the experiment; performances. Conclusions: difficulties to overcome; megajoule lasers; other energy source: particles beams [fr

  10. Laser Cutting, Development Trends

    DEFF Research Database (Denmark)

    Olsen, Flemming Ove

    1999-01-01

    In this paper a short review of the development trends in laser cutting will be given.The technology, which is the fastest expanding industrial production technology will develop in both its core market segment: Flat bed cutting of sheet metal, as it will expand in heavy industry and in cutting...... of 3-dimensional shapes.The CO2-laser will also in the near future be the dominating laser source in the market, although the new developments in ND-YAG-lasers opens for new possibilities for this laser type....

  11. Coherent laser beam combining

    CERN Document Server

    Brignon, Arnaud

    2013-01-01

    Recently, the improvement of diode pumping in solid state lasers and the development of double clad fiber lasers have allowed to maintain excellent laser beam quality with single mode fibers. However, the fiber output power if often limited below a power damage threshold. Coherent laser beam combining (CLBC) brings a solution to these limitations by identifying the most efficient architectures and allowing for excellent spectral and spatial quality. This knowledge will become critical for the design of the next generation high-power lasers and is of major interest to many industrial, environme

  12. Lasers in Ophthalmology

    Institute of Scientific and Technical Information of China (English)

    1992-01-01

    In recent years,lasers have entered every fieldof medicine and especially so in ophthalmol-ogy.The scientific basis of lasers in ophthal-mology is based on three mechanisms:1.Photothermal effectLasers:argon,krypton,dye and diodeA thermal effect is generated when laserenergy is absorbed by pigment leading to in-creased vibration and therefore heat content.A

  13. Integrated Laser-Target Interaction Experiments on the RAL Petawatt Laser

    International Nuclear Information System (INIS)

    Patel, P. K.; Key, M. H.; Mackinnon, A. J.; Akli, K.; Berry, R.; Borghesi, M.; Brummit, P. A.; Chambers, D.; Clarke, R. J.; Damian, C.; Chen, H.; Eagleton, R.; Freeman, R.; Glenzer, S.; Gregori, G.; Heathcote, R.; Izumi, N.; Kar, S.; King, J. A.; Kock, J.; Kuba, J.; May, M.; Moon, S.; Neely, D.; Neville, D. R.; Nikroo, A.; Niles, A.; Pasley, J.; Patel, N.; Park, H. S.; Romagnani, L.; Shepherd, R.; Snavely, R. A.; Stephens, R.; Stoeckl, C.; Storm, M.; Theobald, W.; Van Maren, R.; Wilks, S. C.; Zhang, B.

    2005-01-01

    We report on two recent experimental campaigns performed on the new Petawatt laser at the Rutherford Appleton Laboratory in the UK.The laser has recently demonstrated performance characteristics of 400 J of laser energy being delivered on target in a sub 400 fs pulse, reaching a peak focal intensity on the order of 10''21 W/cm''2. The experiments covered multiplic areas of investigation including hot electron transport in planar foil and cone focus geometries, relativistic laser-solid interactions proton beam focusing and heating, and high energy K-alpha production and radiography. A somewhat novel approach was taken to the experiments in that all of the diagnostics required for the different areas of study were fielded simultaneously and operated on all shots. Thus, we were able to obtain extensive sets of measurements on a single-shot basis which provides significant benefit to our understanding of the laser-target interaction conditions and plasma properties. (Author)

  14. Femtosecond laser micromachining of sapphire capillaries for laser-wakefield acceleration

    Energy Technology Data Exchange (ETDEWEB)

    Messner, Philipp; Delbos, Niels Matthias; Maier, Andreas R. [CFEL, Center for Free-Electron Laser Science, 22607 Hamburg (Germany); University of Hamburg, Institute of Experimental Physics, 22761 Hamburg (Germany); Calmano, Thomas [University of Hamburg, Institute of Experimental Physics, 22761 Hamburg (Germany)

    2015-07-01

    Laser-plasma accelerator are promising candidates to provide ultra-relativistic electron beams for compact light sources. One factor that limits the achievable electron beam energy in a laser plasma accelerator is the Rayleigh length of the driver laser, which dictates the length over which the electron beams can effectively be accelerated. To overcome this limitation lasers can be guided in a capillary waveguide to extend the acceleration length beyond the Rayleigh length. The production of waveguide structures on scales, that are suitable for plasma acceleration is very challenging. Here, we present experimental results from waveguide machining in sapphire crystals using a Clark MXR CPA 2010 laser with a wavelength of 775nm, 1KHZ repetition rate and a pulse duration of 160 fs. We discuss the effects of different parameters like energy, lens types, writing speed and polarisation on the size and shape of the capillaries, and compare the performance of different parameter sets.

  15. Estudio sobre el software libre orientado a personas con discapacidad visual

    OpenAIRE

    Palomá Parra, Esaú

    2015-01-01

    Se pretende realizar un estudio sobre las herramientas TIC accesibles a las personas con discapacidad visual, que permita sugerir el diseño de un sistema universal accesible orientado a personas con discapacidad visual. Es pretén realitzar un estudi sobre les eines TIC accessibles a les persones amb discapacitat visual, que permeti suggerir el disseny d'un sistema universal accessible orientat a persones amb discapacitat visual. Master thesis for the Free Software program.

  16. Semiconductor laser shearing interferometer

    International Nuclear Information System (INIS)

    Ming Hai; Li Ming; Chen Nong; Xie Jiaping

    1988-03-01

    The application of semiconductor laser on grating shearing interferometry is studied experimentally in the present paper. The method measuring the coherence of semiconductor laser beam by ion etching double frequency grating is proposed. The experimental result of lens aberration with semiconductor laser shearing interferometer is given. Talbot shearing interferometry of semiconductor laser is also described. (author). 2 refs, 9 figs

  17. Dye laser principles with applications

    CERN Document Server

    Duarte, Frank J; Liao, Peter F; Kelley, Paul

    1990-01-01

    A tutorial introduction to the field of dye lasers, Dye Laser Principles also serves as an up-to-date overview for those using dye lasers as research and industrial tools. A number of the issues discussed in this book are pertinent not only to dye lasers but also to lasers in general. Most of the chapters in the book contain problem sets that expand on the material covered in the chapter.Key Features* Dye lasers are among the most versatile and successful laser sources currently available in use Offering both pulsed and continuous-wave operation and tunable from the near ultraviole

  18. Present and future of laser welding machine; Laser yosetsuki no genjo to tenbo

    Energy Technology Data Exchange (ETDEWEB)

    Taniu, Y. [Ishikawajima-Harima Heavy Industries Co. Ltd., Tokyo (Japan)

    1998-04-01

    This paper describes recent trends of laser welding machine. For CO2 laser welding machine, seam weld of large diameter weld pipes using a 25 kW-class machine, and plate weld of steel plate using a 45 kW-class machine are reported. For YAG laser welding machine, high-output 5.5 kW-class machines are commercialized. Machines with slab structure of plate-like YAG chrystal have been developed which show high-oscillation efficiency and can be applied to cutting. Machines have been developed in which YAG laser output with slab structure is transmitted through GI fiber. High-speed welding of aluminum alloys can be realized by improving the converging performance. Efficiency of YAG laser can be enhanced through the time-divided utilization by switching the beam transmission path using fiber change-over switch. In the automobile industry, CO2 laser is mainly used, and a system combining CO laser with articulate robot is realized. TIG and MIG welding is often used for welding of aluminum for railway vehicles. It is required to reduce the welding strain. In the iron and steel industry, the productivity has been improved by the laser welding. YAG laser is put into practice for nuclear reactors. 5 refs., 8 figs., 1 tab.

  19. X-ray lasers

    CERN Document Server

    Elton, Raymond C

    2012-01-01

    The first in its field, this book is both an introduction to x-ray lasers and a how-to guide for specialists. It provides new entrants and others interested in the field with a comprehensive overview and describes useful examples of analysis and experiments as background and guidance for researchers undertaking new laser designs. In one succinct volume, X-Ray Lasers collects the knowledge and experience gained in two decades of x-ray laser development and conveys the exciting challenges and possibilities still to come._Add on for longer version of blurb_M>The reader is first introduced

  20. Free electron laser

    International Nuclear Information System (INIS)

    Ortega, J.M.; Billardon, M.

    1986-01-01

    Operation principle of a laser and an oscillator are recalled together with the klystron one. In the free electron laser, electrons go through an undulator or an optical klystron. Principles of the last one are given. The two distinct ways of producing coherent radiation with an undulator and an optical klystron are presented. The first one is the use of the free electron laser, the second is to make use of the spontaneous emission generation (harmonics generation). The different current types of free electron lasers are presented (Stanford, Los Alamos, Aco at Orsay). Prospects and applications are given in conclusion [fr

  1. Solid-state laser engineering

    CERN Document Server

    Koechner, Walter

    1999-01-01

    Solid-State Laser Engineering, written from an industrial perspective, discusses in detail the characteristics, design, construction, and performance of solid-state lasers. Emphasis is placed on engineering and practical considerations; phenomenological aspects using models are preferred to abstract mathematical derivations. This new edition has extensively been updated to account for recent developments in the areas of diode-laser pumping, laser materials, and nonlinear crystals. Walter Koechner received a doctorate in Electrical Engineering from the University of Technology in Vienna, Austria, in 1965. He has published numerous papers in the fields of solid-state physics, optics, and lasers. Dr. Koechner is founder and president of Fibertek, Inc., a research firm specializing in the design, development, and production of advanced solid-state lasers, optical radars, and remote-sensing systems.

  2. ALDEIAS URBANAS OU CIDADES INDÍGENAS? REFLEXÕES SOBRE ÍNDIOS E CIDADES

    Directory of Open Access Journals (Sweden)

    Eduardo Soares Nunes

    2010-06-01

    Full Text Available Se a presença indígena nas cidades brasileiras – um fenômeno antigo –, não passou despercebida aos olhos dos(as antropólogos(as, é apenas em anos recentes que começam a aparecer os primeiros trabalhos sobre a questão. Este artigo tem como objeto esse “silêncio antropológico”, num duplo sentido: a primeira parte do texto é uma digressão sobre os ditos “índios urbanos” no indigenismo no Brasil – idéias que, perpassando, em algum grau, a antropologia, influenciaram a falta de produção sobre a questão; a segunda (e principal é uma tentativa de pensar a presença indígena nas cidades de uma perspectiva mais familiar ao pensamento ameríndio. Este artigo é uma proposta de abordagem analítica sobre o tema.

  3. "Y el resto se hace con gritos": Notas sobre literatura y teatro

    Directory of Open Access Journals (Sweden)

    Marcela Arpes

    2009-07-01

    Full Text Available Quisiera comenzar con un, más o menos extenso, listado de obras de teatro que aún permanecen en cartel o, en todo caso, algunas de ellas lo estuvieron hasta marzo, en salas oficiales y alternativas del circuito teatral porteño pero, también, del interior del país: Tres para el té sobre textos de Lewis Carroll; Galileo, sobre la mesa sobre el texto de Bertolt Brecht; Federico tuvo un sueño, inspirada en el cuento de Antonio Tabucchi y en textos poéticos de Federico García Lorca; Los siete locos, de Roberto Arlt; Crave de Sarah Kane; Cielo rojo, el sueño Bolchevique del poeta Vladimir Maiacovsky; La Manchada, sobre Cuentos de la selva de Horacio Quiroga; Doña Flor y sus dos maridos de Jorge Amado; Grande y Pequeño del escritor alemán contemporáneo Botho Strauss; El diario de Anna Frank; Esa que no eres sobre textos de Alejandra Pizarnik, obra que recibió este verano el premio Estrella de Mar en la categoría mejor espectáculo del teatro off; La revolución silenciada sobre la obra Tres jueces para un largo silencio de Andrés Lizarraga, aquel escritor y dramaturgo argentino, el primero en recibir el premio Casas de las Américas; El mundo ha vivido equivocado de Roberto Fontanarrosa; Una vida más cuerda mañana, sobre textos de Griselda Gambaro, Sarah Kane y Vicente Zito Lema; La Divina Comedia de Dante Alighieri: Mi madre Mi Tierra donde conviven textos literarios de autores como Gloria Fuertes y Federico García Lorca; Sabor a Freud de José Pablo Feinman; El Corazón Delator de Edgar Allan Poe; El Relato de Lady Sotheby. de Marlene Spindler, espectáculo basado en textos de Fiodor Dostoyevsky y Stefan Zweig; Juicio al tango, sobre textos de Leopoldo Marechal; El día que Nietzsche lloró, título de la primera novela del profesor de psiquiatría de la Universidad de Stanford, Irvin Yalom; El último encuentro de Sándor Márai, versión escénica de la exitosa novela “El último encuentro” de Sándor Márai aquel escritor

  4. "Y el resto se hace con gritos": Notas sobre literatura y teatro

    Directory of Open Access Journals (Sweden)

    Marcela Arpes

    2009-06-01

    Full Text Available Quisiera comenzar con un, más o menos extenso, listado de obras de teatro que aún permanecen en cartel o, en todo caso, algunas de ellas lo estuvieron hasta marzo, en salas oficiales y alternativas del circuito teatral porteño pero, también, del interior del país: Tres para el té sobre textos de Lewis Carroll; Galileo, sobre la mesa sobre el texto de Bertolt Brecht; Federico tuvo un sueño, inspirada en el cuento de Antonio Tabucchi y en textos poéticos de Federico García Lorca; Los siete locos, de Roberto Arlt; Crave de Sarah Kane; Cielo rojo, el sueño Bolchevique del poeta Vladimir Maiacovsky; La Manchada, sobre Cuentos de la selva de Horacio Quiroga; Doña Flor y sus dos maridos de Jorge Amado; Grande y Pequeño del escritor alemán contemporáneo Botho Strauss; El diario de Anna Frank; Esa que no eres sobre textos de Alejandra Pizarnik, obra que recibió este verano el premio Estrella de Mar en la categoría mejor espectáculo del teatro off; La revolución silenciada sobre la obra Tres jueces para un largo silencio de Andrés Lizarraga, aquel escritor y dramaturgo argentino, el primero en recibir el premio Casas de las Américas; El mundo ha vivido equivocado de Roberto Fontanarrosa; Una vida más cuerda mañana, sobre textos de Griselda Gambaro, Sarah Kane y Vicente Zito Lema; La Divina Comedia de Dante Alighieri: Mi madre Mi Tierra donde conviven textos literarios de autores como Gloria Fuertes y Federico García Lorca; Sabor a Freud de José Pablo Feinman; El Corazón Delator de Edgar Allan Poe; El Relato de Lady Sotheby. de Marlene Spindler, espectáculo basado en textos de Fiodor Dostoyevsky y Stefan Zweig; Juicio al tango, sobre textos de Leopoldo Marechal; El día que Nietzsche lloró, título de la primera novela del profesor de psiquiatría de la Universidad de Stanford, Irvin Yalom; El último encuentro de Sándor Márai, versión escénica de la exitosa novela “El último encuentro” de Sándor Márai aquel escritor

  5. Experimental comparison of laser energy losses in high-quality laser-oxygen cutting of low-carbon steel using radiation from fibre and CO2 lasers

    International Nuclear Information System (INIS)

    Golyshev, A A; Malikov, A G; Orishich, A M; Shulyat'ev, V B

    2015-01-01

    We report a comparative experimental study of laseroxygen cutting of low-carbon steel using a fibre laser with a wavelength of 1.07 μm and a CO 2 laser with a wavelength of 10.6 μm at the sheet thickness of 3 – 16 mm. For the two lasers we have measured the dependence of the cutting speed on the radiation power and determined the cutting speed at which the surface roughness is minimal. The coefficient of laser radiation absorption in the laser cutting process is measured for these lasers at different values of the cutting speed and radiation power. It is found that the minimal roughness of the cut surface is reached at the absorbed laser energy per unit volume of the removed material, equal to 11 – 13 J mm -3 ; this value is the same for the two lasers and does not depend on the sheet thickness. (laser technologies)

  6. Laser-material interactions: A study of laser energy coupling with solids

    Energy Technology Data Exchange (ETDEWEB)

    Shannon, Mark Alan [Univ. of California, Berkeley, CA (United States)

    1993-11-01

    This study of laser-light interactions with solid materials ranges from low-temperature heating to explosive, plasma-forming reactions. Contained are four works concerning laser-energy coupling: laser (i) heating and (ii) melting monitored using a mirage effect technique, (iii) the mechanical stress-power generated during high-powered laser ablation, and (iv) plasma-shielding. First, a photothermal deflection (PTD) technique is presented for monitoring heat transfer during modulated laser heating of opaque solids that have not undergone phase-change. Of main interest is the physical significance of the shape, magnitude, and phase for the temporal profile of the deflection signal. Considered are the effects that thermophysical properties, boundary conditions, and geometry of the target and optical probe-beam have on the deflection response. PTD is shown to monitor spatial and temporal changes in heat flux leaving the surface due to changes in laser energy coupling. The PTD technique is then extended to detect phase-change at the surface of a solid target. Experimental data shows the onset of melt for indium and tin targets. The conditions for which melt can be detected by PTD is analyzed in terms of geometry, incident power and pulse length, and thermophysical properties of the target and surroundings. Next, monitoring high-powered laser ablation of materials with stress-power is introduced. The motivation for considering stress-power is given, followed by a theoretical discussion of stress-power and how it is determined experimentally. Experiments are presented for the ablation of aluminum targets as a function of energy and intensity. The stress-power response is analyzed for its physical significance. Lastly, the influence of plasma-shielding during high-powered pulsed laser-material interactions is considered. Crater size, emission, and stress-power are measured to determine the role that the gas medium and laser pulse length have on plasma shielding.

  7. Laser-material interactions: A study of laser energy coupling with solids

    International Nuclear Information System (INIS)

    Shannon, M.A.; California Univ., Berkeley, CA

    1993-11-01

    This study of laser-light interactions with solid materials ranges from low-temperature heating to explosive, plasma-forming reactions. Contained are four works concerning laser-energy coupling: laser (i) heating and (ii) melting monitored using a mirage effect technique, (iii) the mechanical stress-power generated during high-powered laser ablation, and (iv) plasma-shielding. First, a photothermal deflection (PTD) technique is presented for monitoring heat transfer during modulated laser heating of opaque solids that have not undergone phase-change. Of main interest is the physical significance of the shape, magnitude, and phase for the temporal profile of the deflection signal. Considered are the effects that thermophysical properties, boundary conditions, and geometry of the target and optical probe-beam have on the deflection response. PTD is shown to monitor spatial and temporal changes in heat flux leaving the surface due to changes in laser energy coupling. The PTD technique is then extended to detect phase-change at the surface of a solid target. Experimental data shows the onset of melt for indium and tin targets. The conditions for which melt can be detected by PTD is analyzed in terms of geometry, incident power and pulse length, and thermophysical properties of the target and surroundings. Next, monitoring high-powered laser ablation of materials with stress-power is introduced. The motivation for considering stress-power is given, followed by a theoretical discussion of stress-power and how it is determined experimentally. Experiments are presented for the ablation of aluminum targets as a function of energy and intensity. The stress-power response is analyzed for its physical significance. Lastly, the influence of plasma-shielding during high-powered pulsed laser-material interactions is considered. Crater size, emission, and stress-power are measured to determine the role that the gas medium and laser pulse length have on plasma shielding

  8. Sobre o feminino e a cidadania em Pompéia

    OpenAIRE

    Feitosa, Lourdes M. G. C.; Faversani, Fábio

    2002-01-01

    Nos últimos anos, novos trabalhos tem questionado os antigos paradigmas interpretativos que excluíam a mulher do espaço público e do grupo de cidadãos. O objetivo deste artigo é refletir sobre a ideia equivocada do confinamento feminino ao lar e de sua exclusão da vida pública e do poder, durante o século 1 d.C. A análise de inscrições parietais de Pompéia tem sido importante para questionar esta imagem sobre as mulheres romanas. _______________________________________________________________...

  9. La literatura comparada sobre reformas administrativas: Desarrollos, limitaciones y posibilidades

    OpenAIRE

    Dussauge Laguna, Mauricio I.

    2009-01-01

    Durante las últimas dos décadas, la literatura comparada sobre reformas administrativas ha crecido significativamente. ¿Cuáles han sido sus aportaciones y cuáles sus limitaciones? ¿Qué nos queda por aprender sobre el tema? Este ensayo repasa los debates centrales de la literatura, analiza sus principales debilidades y sugiere un conjunto de futuras líneas de investigación. El argumento central del ensayo es que la literatura comparada en esta materia ha avanzado en forma considerable en térmi...

  10. Santa sexualidad: concepciones de dos monjas sobre Feminidad y sexualidad

    OpenAIRE

    Giraldo Quijano, Isabel Cristina

    2009-01-01

    En el contexto de la religión católica, la feminidad y la sexualidad femenina se configuran según dogmas y representaciones sociales específicos, en los que la imagen de Cristo -y todo lo que ello implica- actúa como elemento fundamental en la construcción de las concepciones de las mujeres consagradas a la vida religiosa sobre sex ualidad, erotismo, cuerpo. amor. Este artículo pretende explorar desde un punto de vista sociológico las concepciones de dos monjas sobre los temas mencionados....

  11. FALANDO SOBRE SEXUALIDADE NA ADOLESCÊNCIA: RELATO DE EXPERIÊNCIA

    OpenAIRE

    Rabin, Eliane Goldberg; UFCSPA; Waterkemper, Roberta; UFCSPA; Caregnato, Rita C. A.; UFCSPA; Souza, Emiliane Nogueira de; UFCSPA

    2014-01-01

    Trata-se de um relato de experiência sobre atividade de extensão realizada por docentes e acadêmicos do Curso de Graduação em Enfermagem sobre sexualidade na adolescência. Atividade realizada com jovens de 10 a 19 anos, estudantes do ensino fundamental e médio de escolas públicas de Porto Alegre. Foram utilizadas diferentes estratégias e dinâmicas para o desenvolvimento das atividades, com vistas à maior participação dos jovens escolares. Os temas abordados foram as mudanças corporais, por me...

  12. Laser Dyes

    Indian Academy of Sciences (India)

    amplification or generation of coherent light waves in the UV,. VIS, and near IR region. .... ciency in most flashlamp pumped dye lasers. It is used as reference dye .... have led to superior laser dyes with increased photostabilities. For instance ...

  13. Plasma cutting or laser cutting. Plasma setsudan ka laser setsudan ka

    Energy Technology Data Exchange (ETDEWEB)

    Nakamura, A. (Tanaka Engineering Works Ltd., Saitama (Japan))

    1991-05-01

    Comparisons and discussions were made on the plasma cutting and laser cutting in sheet steel cutting, referring partly to gas cutting. Historically, the cutting has been developed from gas, plasma, and laser in that order, and currently these three methods are used mixedly. Generally, the plasma cutting is superior in cutting speed, but inferior in cut face quality, and it requires measures of dust collection. Due to high accuracy and quality in cut face, the laser cutting has been practically used for quite some time in the thin sheet industry, but medium to thick sheet cutting had a problem of unavailability of high output laser suitable for these ranges. However, the recent technologies have overcome the problem as a result of development at the authors {prime} company of a 2 kW class laser cutter capable of cutting 19 mm thick sheet. The cutter has been proven being particularly excellent in controllability. Choice of whether plasma or laser would depend upon which priority is to be taken, cost or accuracy. 15 figs., 3 tabs.

  14. Really Large Scale Computer Graphic Projection Using Lasers and Laser Substitutes

    Science.gov (United States)

    Rother, Paul

    1989-07-01

    This paper reflects on past laser projects to display vector scanned computer graphic images onto very large and irregular surfaces. Since the availability of microprocessors and high powered visible lasers, very large scale computer graphics projection have become a reality. Due to the independence from a focusing lens, lasers easily project onto distant and irregular surfaces and have been used for amusement parks, theatrical performances, concert performances, industrial trade shows and dance clubs. Lasers have been used to project onto mountains, buildings, 360° globes, clouds of smoke and water. These methods have proven successful in installations at: Epcot Theme Park in Florida; Stone Mountain Park in Georgia; 1984 Olympics in Los Angeles; hundreds of Corporate trade shows and thousands of musical performances. Using new ColorRayTM technology, the use of costly and fragile lasers is no longer necessary. Utilizing fiber optic technology, the functionality of lasers can be duplicated for new and exciting projection possibilities. The use of ColorRayTM technology has enjoyed worldwide recognition in conjunction with Pink Floyd and George Michaels' world wide tours.

  15. Rutas de glicosilación en Candida albicans: circuitos reguladores y efectos sobre virulencia

    OpenAIRE

    Domínguez Cantero, María del Pilar

    2011-01-01

    [ES]Esta tesis trata sobre las rutas de glicosilación en Candida albicans: circuitos reguladores y efectos sobre virulencia. [EN]This thesis is about glycosylation pathways in Candida albicans: regulatory circuits and effects on virulence.

  16. Solid-State Random Lasers

    CERN Document Server

    Noginov, Mikhail A

    2005-01-01

    Random lasers are the simplest sources of stimulated emission without cavity, with the feedback provided by scattering in a gain medium. First proposed in the late 60’s, random lasers have grown to a large research field. This book reviews the history and the state of the art of random lasers, provides an outline of the basic models describing their behavior, and describes the recent advances in the field. The major focus of the book is on solid-state random lasers. However, it also briefly describes random lasers based on liquid dyes with scatterers. The chapters of the book are almost independent of each other. So, the scientists or engineers interested in any particular aspect of random lasers can read directly the relevant section. Researchers entering the field of random lasers will find in the book an overview of the field of study. Scientists working in the field can use the book as a reference source.

  17. Alternate laser fusion drivers

    International Nuclear Information System (INIS)

    Pleasance, L.D.

    1979-11-01

    One objective of research on inertial confinement fusion is the development of a power generating system based on this concept. Realization of this goal will depend on the availability of a suitable laser or other system to drive the power plant. The primary laser systems used for laser fusion research, Nd 3+ : Glass and CO 2 , have characteristics which may preclude their use for this application. Glass lasers are presently perceived to be incapable of sufficiently high average power operation and the CO 2 laser may be limited by and issues associated with target coupling. These general perceptions have encouraged a search for alternatives to the present systems. The search for new lasers has been directed generally towards shorter wavelengths; most of the new lasers discovered in the past few years have been in the visible and ultraviolet region of the spectrum. Virtually all of them have been advocated as the most promising candidate for a fusion driver at one time or another

  18. Laser-driven hydrothermal process studied with excimer laser pulses

    Science.gov (United States)

    Mariella, Raymond; Rubenchik, Alexander; Fong, Erika; Norton, Mary; Hollingsworth, William; Clarkson, James; Johnsen, Howard; Osborn, David L.

    2017-08-01

    Previously, we discovered [Mariella et al., J. Appl. Phys. 114, 014904 (2013)] that modest-fluence/modest-intensity 351-nm laser pulses, with insufficient fluence/intensity to ablate rock, mineral, or concrete samples via surface vaporization, still removed the surface material from water-submerged target samples with confinement of the removed material, and then dispersed at least some of the removed material into the water as a long-lived suspension of nanoparticles. We called this new process, which appears to include the generation of larger colorless particles, "laser-driven hydrothermal processing" (LDHP) [Mariella et al., J. Appl. Phys. 114, 014904 (2013)]. We, now, report that we have studied this process using 248-nm and 193-nm laser light on submerged concrete, quartzite, and obsidian, and, even though light at these wavelengths is more strongly absorbed than at 351 nm, we found that the overall efficiency of LDHP, in terms of the mass of the target removed per Joule of laser-pulse energy, is lower with 248-nm and 193-nm laser pulses than with 351-nm laser pulses. Given that stronger absorption creates higher peak surface temperatures for comparable laser fluence and intensity, it was surprising to observe reduced efficiencies for material removal. We also measured the nascent particle-size distributions that LDHP creates in the submerging water and found that they do not display the long tail towards larger particle sizes that we had observed when there had been a multi-week delay between experiments and the date of measuring the size distributions. This is consistent with transient dissolution of the solid surface, followed by diffusion-limited kinetics of nucleation and growth of particles from the resulting thin layer of supersaturated solution at the sample surface.

  19. Degenerate band edge laser

    Science.gov (United States)

    Veysi, Mehdi; Othman, Mohamed A. K.; Figotin, Alexander; Capolino, Filippo

    2018-05-01

    We propose a class of lasers based on a fourth-order exceptional point of degeneracy (EPD) referred to as the degenerate band edge (DBE). EPDs have been found in parity-time-symmetric photonic structures that require loss and/or gain; here we show that the DBE is a different kind of EPD since it occurs in periodic structures that are lossless and gainless. Because of this property, a small level of gain is sufficient to induce single-frequency lasing based on a synchronous operation of four degenerate Floquet-Bloch eigenwaves. This lasing scheme constitutes a light-matter interaction mechanism that leads also to a unique scaling law of the laser threshold with the inverse of the fifth power of the laser-cavity length. The DBE laser has the lowest lasing threshold in comparison to a regular band edge laser and to a conventional laser in cavities with the same loaded quality (Q ) factor and length. In particular, even without mirror reflectors the DBE laser exhibits a lasing threshold which is an order of magnitude lower than that of a uniform cavity laser of the same length and with very high mirror reflectivity. Importantly, this novel DBE lasing regime enforces mode selectivity and coherent single-frequency operation even for pumping rates well beyond the lasing threshold, in contrast to the multifrequency nature of conventional uniform cavity lasers.

  20. Precise femtosecond laser ablation of dental hard tissue: preliminary investigation on adequate laser parameters

    International Nuclear Information System (INIS)

    Hikov, Todor; Pecheva, Emilia; Petrov, Todor; Montgomery, Paul; Antoni, Frederic; Leong-Hoi, Audrey

    2017-01-01

    This work aims at evaluating the possibility of introducing state-of-the-art commercial femtosecond laser system in restorative dentistry by maintaining well-known benefits of lasers for caries removal, but also in overcoming disadvantages such as thermal damage of irradiated substrate. Femtosecond ablation of dental hard tissue is investigated by changing the irradiation parameters (pulsed laser energy, scanning speed and pulse repetition rate), assessed for enamel and dentin. The femtosecond laser system used in this work may be suitable for cavity preparation in dentin and enamel, due to the expected effective ablation and low temperature increase when using ultra short laser pulses. If adequate laser parameters are selected, this system seems to be promising for promoting a laser-assisted, minimally invasive approach in restorative dentistry. (paper)

  1. Algunas reflexiones sobre el tabaquismo como factor de riesgo para diferentes enfermedades

    Directory of Open Access Journals (Sweden)

    Miriam Bolet Astoviza

    2003-08-01

    Full Text Available Se realizó una revisión sobre el tabaquismo como factor de riesgo para muchas enfermedades, entre ellas, las cardiovasculares, con el objetivo de profundizar sobre los efectos perjudiciales de esta drogadicción, y para que todos los médicos se actualicen sobre el tema. Trata la magnitud del problema, enfermedades que provoca, fumadores activos y pasivos, prevención y recomendaciones.A literature review on smoking as a risk factor in many diseases, particularly, the cardiovascular diseases was made to delve into the harmful effects of this drug addiction and to update the knowledge of all the physicians on this topic. This paper deals with the size of the problem, the diseases caused, active and passive smokers, prevention and recommendations.

  2. Semiconductor lasers stability, instability and chaos

    CERN Document Server

    Ohtsubo, Junji

    2017-01-01

    This book describes the fascinating recent advances made concerning the chaos, stability and instability of semiconductor lasers, and discusses their applications and future prospects in detail. It emphasizes the dynamics in semiconductor lasers by optical and electronic feedback, optical injection, and injection current modulation. Applications of semiconductor laser chaos, control and noise, and semiconductor lasers are also demonstrated. Semiconductor lasers with new structures, such as vertical-cavity surface-emitting lasers and broad-area semiconductor lasers, are intriguing and promising devices. Current topics include fast physical number generation using chaotic semiconductor lasers for secure communication, development of chaos, quantum-dot semiconductor lasers and quantum-cascade semiconductor lasers, and vertical-cavity surface-emitting lasers. This fourth edition has been significantly expanded to reflect the latest developments. The fundamental theory of laser chaos and the chaotic dynamics in se...

  3. uv dye lasers

    International Nuclear Information System (INIS)

    Abakumov, G.A.; Fadeev, V.V.; Khokhlov, R.V.; Simonov, A.P.

    1975-01-01

    The most important property of visible dye lasers, that is, continuous wavelength tuning, stimulated the search for dyes capable to lase in uv. They were found in 1968. Now the need for tunable uv lasers for applications in spectroscopy, photochemistry, isotope separation, remote air and sea probing, etc. is clearly seen. A review of some recent advances in uv dye lasers is reviewed

  4. Laser fusion: an overview

    International Nuclear Information System (INIS)

    Boyer, K.

    1975-01-01

    The laser fusion concept is described along with developments in neodymium and carbon dioxide lasers. Fuel design and fabrication are reviewed. Some spin-offs of the laser fusion program are discussed. (U.S.)

  5. High energy HF pulsed lasers

    International Nuclear Information System (INIS)

    Patterson, E.L.; Gerber, R.A.

    1976-01-01

    Recent experiments show that pulsed HF lasers are capable of producing high energy with good efficiency. Preliminary experiments show that the laser radiation from the high-gain medium can be controlled with a low-power probe laser beam or with low-level feedback. These results indicate that the HF laser may have potential for second-generation laser fusion experiments

  6. Optical pumping of Rb by Ti:Sa laser and high-power laser diode

    Czech Academy of Sciences Publication Activity Database

    Buchta, Zdeněk; Rychnovský, Jan; Lazar, Josef

    2006-01-01

    Roč. 8, č. 1 (2006), s. 350-354 ISSN 1454-4164 R&D Projects: GA AV ČR IAA1065303; GA ČR GA102/04/2109 Institutional research plan: CEZ:AV0Z20650511 Keywords : optical pumping * Ti:Sa laser * laser diode * emission linewidth * spectroscopy * laser frequency stabilization Subject RIV: BH - Optics, Masers, Lasers Impact factor: 1.106, year: 2006

  7. The suppression of radiation reaction and laser field depletion in laser-electron beam interaction

    Science.gov (United States)

    Ong, J. F.; Moritaka, T.; Takabe, H.

    2018-03-01

    The effects of radiation reaction (RR) have been studied extensively by using the interaction of ultraintense lasers with a counter-propagating relativistic electron. At the laser intensity at the order of 1023 W/cm2, the effects of RR are significant in a few laser periods for a relativistic electron. However, a laser at such intensity is tightly focused and the laser energy is usually assumed to be fixed. Then, the signal of RR and energy conservation cannot be guaranteed. To assess the effects of RR in a tightly focused laser pulse and the evolution of the laser energy, we simulated this interaction with a beam of 109 electrons by means of a Particle-In-Cell method. We observe that the effects of RR are suppressed due to the ponderomotive force and accompanied by a non-negligible amount of laser field energy reduction. This is because the ponderomotive force prevents the electrons from approaching the center of the laser pulse and leads to an interaction at the weaker field region. At the same time, the laser energy is absorbed through ponderomotive acceleration. Thus, the kinetic energy of the electron beam has to be carefully selected such that the effects of RR become obvious.

  8. Integrated laser-target interaction experiments on the RAL petawatt laser

    International Nuclear Information System (INIS)

    Patel, P K; Key, M H; Mackinnon, A J

    2005-01-01

    We review a recent experimental campaign to study the interaction physics of petawatt laser pulses incident at relativistic intensities on solid targets. The campaign was performed on the 500 J sub-picosecond petawatt laser at the Rutherford Appleton Laboratory. An extensive suite of optical, x-ray, and particle diagnostics was employed to characterise the processes of laser absorption, electron generation and transport, thermal and K-alpha x-ray generation, and proton acceleration

  9. Vacuum ultraviolet Ar2*laser pumped by a high-intensity laser

    International Nuclear Information System (INIS)

    Kubodera, Shoichi; Kaku, Masanori; Higashiguchi, Takeshi

    2004-01-01

    We observed a small-signal gain of Ar 2 * emission at 126 nm by use of an Ar-filled hollow fiber to guide the ultrashort-pulse high-intensity laser propagation. The small signal gain coefficient was measured to be 0.05 cm -1 at 126 nm. Kinetic analysis revealed that the electrons produced by the high-intensity laser through an optical-field ionization process initiated the Ar 2 * production process. This laser scheme could be combined with high harmonic radiation of the pump laser in the vacuum ultraviolet (VUV), leading to the production of amplified ultrashort VUV pulses. (author)

  10. O efeito do laser de baixa energia no crescimento bacteriano "in vitro" Low level laser effect in "in vitro" bacterial growth

    Directory of Open Access Journals (Sweden)

    Fernando Coutinho

    2007-08-01

    Full Text Available OBJETIVO: Avaliar, por meio de estudo bacteriológico in vitro, o efeito de dois tipos de laser de baixa energia (LBE sobre diferentes populações bacterianas habitualmente presentes em feridas pós-traumáticas. MÉTODOS: Foram colhidos swabs diretamente do sítio de infecção de pacientes internados com osteomielite pós-traumática crônica. As bactérias isoladas foram Acinetobacter baumanii complex, Escherichia coli, Haemophilus influenzae, Klebsiella pneumoniae, Pseudomonas aeruginosa, Salmonela sp, Serratia sp e Staphylococcus aureus. O material coletado foi semeado em meio ágar-sangue, através de alça estéril, utilizando-se 30 placas de Petri para cada germe. Foram utilizados dois aparelhos de LBE: Ibramed Laser Pulse #01189, com 15W/904nm por 200 segundos, e Phisiolux dual Bioset #9909001, com 20W/904nm por 230 segundos. Nos grupos I (n = 10 e II (n = 10, as bactérias sofreram irradiação pelo laser. O grupo III (n = 10 serviu de controle, não sendo irradiado. As bactérias dos grupos I e II foram irradiadas em câmara de fluxo laminar, previamente esterilizada por raio ultravioleta. O laser foi administrado de forma direta, central e perpendicularmente à superfície de cultivo das bactérias, com distância-padrão de 1cm, através de orifício confeccionado na tampa das placas. O crescimento bacteriano foi analisado após 12 e 24 horas da irradiação. Os resultados foram processados estatisticamente, utilizando-se o teste não-paramétrico de Kruskall-Wallis, com nível de significância p OBJECTIVE: To perform an in vitro bacteriologic study to evaluate the effect of two types of low level laser (LLL on different bacterial populations usually present in post-traumatic wounds. METHODS: Swabs were prepared directly at the infection site of patients hospitalized with chronic post-traumatic osteomyelitis. Isolated bacteria were Acinetobacter baumanii complex, Escherichia coli, Haemophilus influenzae, Klebsiella pneumoniae

  11. Lasers in tattoo and pigmentation control: role of the PicoSure® laser system

    Directory of Open Access Journals (Sweden)

    Torbeck R

    2016-05-01

    Full Text Available Richard Torbeck,1 Richard Bankowski,2 Sarah Henize,3 Nazanin Saedi,11Department of Dermatology and Cutaneous Biology, Sidney Kimmel Medical College, Thomas Jefferson University, Philadelphia, PA, 2Cynosure, Inc, Westford, MA, 3Huron Consulting Group, Chicago, IL, USABackground and objectives: The use of picosecond lasers to remove tattoos has greatly improved due to the long-standing outcomes of nanosecond lasers, both clinically and histologically. The first aesthetic picosecond laser available for this use was the PicoSure® laser system (755/532 nm. Now that a vast amount of research on its use has been conducted, we performed a comprehensive review of the literature to validate the continued application of the PicoSure® laser system for tattoo removal.Study design and methods: A PubMed search was conducted using the term "picosecond" combined with "laser", "dermatology", and "laser tattoo removal".Results: A total of 13 articles were identified, and ten of these met the inclusion criteria for this review. The majority of studies showed that picosecond lasers are an effective and safe treatment mode for the removal of tattoo pigments. Several studies also indicated potential novel applications of picosecond lasers in the removal of various tattoo pigments (eg, black, red, and yellow. Adverse effects were generally mild, such as transient hypopigmentation or blister formation, and were rarely more serious, such as scarring and/or textural change.Conclusion: Advancements in laser technologies and their application in cutaneous medicine have revolutionized the field of laser surgery. Computational modeling provides evidence that the optimal pulse durations for tattoo ink removal are in the picosecond domain. It is recommended that the PicoSure® laser system continue to be used for safe and effective tattoo removal, including for red and yellow pigments.Keywords: tattoo, removal, laser, picosecond 

  12. Reflexiones sobre el concepto de justicia

    Directory of Open Access Journals (Sweden)

    Víctor C. Pascual Planchuelo

    2005-06-01

    Full Text Available Este ensayo constituye una reflexión sobre el concepto de Justicia. No se centra, como tantos estudios al respecto, en el plano teórico y metafísico, sino que atiende problemas de mayor actualidad: la opinión de los ciudadanos, la postura de los profesionales y otros asuntos controvertidos del ámbito del Derecho.

  13. Nuevas reflexiones sobre la Posgerontología

    Directory of Open Access Journals (Sweden)

    Ricardo Iacub

    2014-03-01

    Full Text Available La Posgerontología plantea una lectura epistemológica, crítica y política sobre los relatos con los que se construye el envejecimiento y la vejez desde la gerontología. En este artículo se analizará crítica y políticamente a la gerontología, tanto como un objeto cultural exótico - por su pretensión omnicomprensiva -, como por ser un campo de conocimientos cuyos presupuestos explícitos e implícitos inciden sobre su objeto de estudio. Estos factores ponen en consideración los ajustes que debe realizar todo campo de conocimiento frente a los cambios que le imprime el contexto. Así como también expresan la necesidad de dar cuenta de los efectos de la realidad que construyen en las diversas formas de saber y en las prácticas sociales.

  14. Femtosecond Fiber Lasers

    Science.gov (United States)

    Bock, Katherine J.

    This thesis focuses on research I have done on ytterbium-doped femtosecond fiber lasers. These lasers operate in the near infrared region, lasing at 1030 nm. This wavelength is particularly important in biomedical applications, which includes but is not limited to confocal microscopy and ablation for surgical incisions. Furthermore, fiber lasers are advantageous compared to solid state lasers in terms of their cost, form factor, and ease of use. Solid state lasers still dominate the market due to their comparatively high energy pulses. High energy pulse generation in fiber lasers is hindered by either optical wave breaking or by multipulsing. One of the main challenges for fiber lasers is to overcome these limitations to achieve high energy pulses. The motivation for the work done in this thesis is increasing the output pulse peak power and energy. The main idea of the work is that decreasing the nonlinearity that acts on the pulse inside the cavity will prevent optical wave breaking, and thus will generate higher energy pulses. By increasing the output energy, ytterbium-doped femtosecond fiber lasers can be competitive with solid state lasers which are used commonly in research. Although fiber lasers tend to lack the wavelength tuning ability of solid state lasers, many biomedical applications take advantage of the 1030 microm central wavelength of ytterbium-doped fiber lasers, so the major limiting factor of fiber lasers in this field is simply the output power. By increasing the output energy without resorting to external amplification, the cavity is optimized and cost can remain low and economical. During verification of the main idea, the cavity was examined for possible back-reflections and for components with narrow spectral bandwidths which may have contributed to the presence of multipulsing. Distinct cases of multipulsing, bound pulse and harmonic mode-locking, were observed and recorded as they may be of more interest in the future. The third

  15. Single frequency semiconductor lasers

    CERN Document Server

    Fang, Zujie; Chen, Gaoting; Qu, Ronghui

    2017-01-01

    This book systematically introduces the single frequency semiconductor laser, which is widely used in many vital advanced technologies, such as the laser cooling of atoms and atomic clock, high-precision measurements and spectroscopy, coherent optical communications, and advanced optical sensors. It presents both the fundamentals and characteristics of semiconductor lasers, including basic F-P structure and monolithic integrated structures; interprets laser noises and their measurements; and explains mechanisms and technologies relating to the main aspects of single frequency lasers, including external cavity lasers, frequency stabilization technologies, frequency sweeping, optical phase locked loops, and so on. It paints a clear, physical picture of related technologies and reviews new developments in the field as well. It will be a useful reference to graduate students, researchers, and engineers in the field.

  16. Strong field laser physics

    CERN Document Server

    2008-01-01

    Since the invention of the laser in the 1960s, people have strived to reach higher intensities and shorter pulse durations. High intensities and ultrashort pulse durations are intimately related. Recent developments have shown that high intensity lasers also open the way to realize pulses with the shortest durations to date, giving birth to the field of attosecond science (1 asec = 10-18s). This book is about high-intensity lasers and their applications. The goal is to give an up to date introduction to the technology behind these laser systems and to the broad range of intense laser applications. These applications include AMO (atomic molecular and optical) physics, x-ray science, attosecond science, plasma physics and particle acceleration, condensed matter science and laser micromachining, and finally even high-energy physics.

  17. Direct diode lasers with comparable beam quality to fiber, CO2, and solid state lasers

    Science.gov (United States)

    Huang, Robin K.; Chann, Bien; Burgess, James; Kaiman, Michael; Overman, Robert; Glenn, John D.; Tayebati, Parviz

    2012-03-01

    TeraDiode has produced kW-class ultra-high brightness fiber-coupled direct diode lasers. A fiber-coupled direct diode laser with a power level of 2,040 W from a 50 μm core diameter, 0.15 numerical aperture (NA) output fiber at a single center wavelength was demonstrated. This was achieved with a novel beam combining and shaping technique using COTS diode lasers. The fiber-coupled output corresponds to a Beam Parameter Product (BPP) of 3.75 mm-mrad and is the lowest BPP kW-class direct diode laser yet reported. This laser is suitable for industrial materials processing applications, including sheet metal cutting and welding. This 2-kW fiber-coupled direct diode laser has comparable brightness to that of industrial fiber lasers and CO2 lasers, and is over 10x brighter than state-of-the-art direct diode lasers.

  18. Pulsed CH3OH terahertz laser radiation pumped by 9P(36) CO2 lasers

    International Nuclear Information System (INIS)

    Jiu Zhixian; Zuo Duluo; Miao Liang; Cheng Zuhai

    2011-01-01

    An efficient pulsed CH 3 OH terahertz (THz) laser pumped by a TEA CO 2 laser was investigated experimentally. A simple terahertz cavity and a TEA CO 2 laser for the optically pumped THz radiation were studied experimentally. To improve THz laser energy and photon conversion efficiency, two different TEA CO 2 lasers were developed to pump CH 3 OH. When CH 3 OH was pumped by the 9P(36) line with different powers of the CO 2 laser, the generation of terahertz radiation with energy as high as 0.307mJ and 23.75mJ were obtained, respectively. The corresponding photon conversion efficiencies were 0.29% and 2.4%. The photon conversion efficiency increases by a factor of about 8. Meanwhile, higher peak power of pump laser effectively improves the photon conversion efficiency. And the optimum THz laser pressure increases with narrower pulse width of pump laser because of increasing absorptive gases molecules of CH 3 OH with higher peak power of pump laser.

  19. Lasers '90: Proceedings of the 13th International Conference on Lasers and Applications, San Diego, CA, Dec. 10-14, 1990

    International Nuclear Information System (INIS)

    Harris, D.G.; Herbelin, J.

    1991-01-01

    The general topics considered are: x-ray lasers; FELs; solid state lasers; techniques and phenomena of ultrafast lasers; optical filters and free space laser communications; discharge lasers; tunable lasers; applications of lasers in medicine and surgery; lasers in materials processing; high power lasers; dynamics gratings, wave mixing, and holography; up-conversion lasers; lidar and laser radar; laser resonators; excimer lasers; laser propagation; nonlinear and quantum optics; blue-green technology; imaging; laser spectroscopy; chemical lasers; dye lasers; and lasers in chemistry

  20. Laser Wakefield Acceleration Driven by a CO2 Laser (STELLA-LW) - Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Kimura, Wayne D

    2008-06-27

    The original goals of the Staged Electron Laser Acceleration – Laser Wakefield (STELLA-LW) program were to investigate two new methods for laser wakefield acceleration (LWFA). In pseudo-resonant LWFA (PR-LWFA), a laser pulse experiences nonlinear pulse steepening while traveling through the plasma. This steepening allows the laser pulse to generate wakefields even though the laser pulse length is too long for resonant LWFA to occur. For the conditions of this program, PR-LWFA requires a minimum laser peak power of 3 TW and a low plasma density (10^16 cm^-3). Seeded self-modulated LWFA (seeded SM-LWFA) combines LWFA with plasma wakefield acceleration (PWFA). An ultrashort (~100 fs) electron beam bunch acts as a seed in a plasma to form a wakefield via PWFA. This wakefield is subsequently amplified by the laser pulse through a self-modulated LWFA process. At least 1 TW laser power and, for a ~100-fs bunch, a plasma density ~10^17 cm^-3 are required. STELLA-LW was located on Beamline #1 at the Brookhaven National Laboratory (BNL) Accelerator Test Facility (ATF). The ATF TW CO2 laser served as the driving laser beam for both methods. For PR-LWFA, a single bunch was to probe the wakefield produced by the laser beam. For seeded SM-LWFA, the ATF linac would produce two bunches, where the first would be the seed and the second would be the witness. A chicane would compress the first bunch to enable it to generate wakefields via PWFA. The plasma source was a short-length, gas-filled capillary discharge with the laser beam tightly focused in the center of the capillary, i.e., no laser guiding was used, in order to obtain the needed laser intensity. During the course of the program, several major changes had to be made. First, the ATF could not complete the upgrade of the CO2 laser to the 3 TW peak power needed for the PR-LWFA experiment. Therefore, the PR-LWFA experiment had to be abandoned leaving only the seeded SM-LWFA experiment. Second, the ATF discovered that the