Comparative economic efficiency, operating costs and fuel consumption rates of freight transport modes between the largest industrial cities and seaports in South Africa

Directory of Open Access Journals (Sweden)

W J (Wessel Pienaar

2013-09-01

Full Text Available The paper deals with aspects of efficiency within the five modes of freight transport, with special reference to the operating cost and fuel consumption rates between South Africa’s largest industrial cities and seaports. In particular, the paper deals with (a the opportunities that exist for the achievement of efficiency in freight transport; (b the subgroups of economies that can enhance efficiency attainment in the freight transport industry; (c prevailing cost structures, operating cost and fuel consumption rates within the five modes of freight transport; and (d the salient economic features of the freight transport market. The research approach and methodology combine (a a literature survey; (b empiric research, (c an analysis of the cost structures of freight transport operators from different modes of transport; and (d interviews conducted with specialists in the freight transport industry.

Moly99 Production Facility: Report on Beamline Components, Requirements, Costs

Energy Technology Data Exchange (ETDEWEB)

Bishofberger, Kip A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2015-12-23

In FY14 we completed the design of the beam line for the linear accelerator production design concept. This design included a set of three bending magnets, quadrupole focusing magnets, and octopoles to flatten the beam on target. This design was generic and applicable to multiple different accelerators if necessary. In FY15 we built on that work to create specifications for the individual beam optic elements, including power supply requirements. This report captures the specification of beam line components with initial cost estimates for the NorthStar production facility.This report is organized as follows: The motivation of the beamline design is introduced briefly, along with renderings of the design. After that, a specific list is provided, which accounts for each beamline component, including part numbers and costs, to construct the beamline. After that, this report details the important sections of the beamline and individual components. A final summary and list of follow-on activities completes this report.

Status and opportunities associated with product costing strategies in wood component manufacturing

Science.gov (United States)

Adrienn Andersch; Urs Buehlmann; Jan Wiedenbeck; Steve Lawser

2013-01-01

Product costing systems are critically important for businesses because they help reduce costs, price products at competitive prices, and enable strategic decisionmaking. This article reports the results of a survey designed to collect information about practices used by the North American hardwood dimension and components industry to calculate the cost of their...

Footprinting analysis of interactions between the largest eukaryotic RNase P/MRP protein Pop1 and RNase P/MRP RNA components.

Science.gov (United States)

Fagerlund, Robert D; Perederina, Anna; Berezin, Igor; Krasilnikov, Andrey S

2015-09-01

Ribonuclease (RNase) P and RNase MRP are closely related catalytic ribonucleoproteins involved in the metabolism of a wide range of RNA molecules, including tRNA, rRNA, and some mRNAs. The catalytic RNA component of eukaryotic RNase P retains the core elements of the bacterial RNase P ribozyme; however, the peripheral RNA elements responsible for the stabilization of the global architecture are largely absent in the eukaryotic enzyme. At the same time, the protein makeup of eukaryotic RNase P is considerably more complex than that of the bacterial RNase P. RNase MRP, an essential and ubiquitous eukaryotic enzyme, has a structural organization resembling that of eukaryotic RNase P, and the two enzymes share most of their protein components. Here, we present the results of the analysis of interactions between the largest protein component of yeast RNases P/MRP, Pop1, and the RNA moieties of the enzymes, discuss structural implications of the results, and suggest that Pop1 plays the role of a scaffold for the stabilization of the global architecture of eukaryotic RNase P RNA, substituting for the network of RNA-RNA tertiary interactions that maintain the global RNA structure in bacterial RNase P. © 2015 Fagerlund et al.; Published by Cold Spring Harbor Laboratory Press for the RNA Society.

The Cost Analysis of Corrosion Protection Solutions for Steel Components in Terms of the Object Life Cycle Cost

Directory of Open Access Journals (Sweden)

Kowalski Dariusz

2017-09-01

Full Text Available Steel materials, due to their numerous advantages - high availability, easiness of processing and possibility of almost any shaping are commonly applied in construction for carrying out basic carrier systems and auxiliary structures. However, the major disadvantage of this material is its high corrosion susceptibility, which depends strictly on the local conditions of the facility and the applied type of corrosion protection system. The paper presents an analysis of life cycle costs of structures installed on bridges used in the road lane conditions. Three anti-corrosion protection systems were considered, analyzing their essential cost components. The possibility of reducing significantly the costs associated with anti-corrosion protection at the stage of steel barriers maintenance over a period of 30 years has been indicated. The possibility of using a new approach based on the life cycle cost estimation in the anti-corrosion protection of steel elements is presented. The relationship between the method of steel barrier protection, the scope of repair, renewal work and costs is shown. The article proposes an optimal solution which, while reducing the cost of maintenance of road infrastructure components in the area of corrosion protection, allows to maintain certain safety standards for steel barriers that are installed on the bridge.

The Cost Analysis of Corrosion Protection Solutions for Steel Components in Terms of the Object Life Cycle Cost

Science.gov (United States)

Kowalski, Dariusz; Grzyl, Beata; Kristowski, Adam

2017-09-01

Steel materials, due to their numerous advantages - high availability, easiness of processing and possibility of almost any shaping are commonly applied in construction for carrying out basic carrier systems and auxiliary structures. However, the major disadvantage of this material is its high corrosion susceptibility, which depends strictly on the local conditions of the facility and the applied type of corrosion protection system. The paper presents an analysis of life cycle costs of structures installed on bridges used in the road lane conditions. Three anti-corrosion protection systems were considered, analyzing their essential cost components. The possibility of reducing significantly the costs associated with anti-corrosion protection at the stage of steel barriers maintenance over a period of 30 years has been indicated. The possibility of using a new approach based on the life cycle cost estimation in the anti-corrosion protection of steel elements is presented. The relationship between the method of steel barrier protection, the scope of repair, renewal work and costs is shown. The article proposes an optimal solution which, while reducing the cost of maintenance of road infrastructure components in the area of corrosion protection, allows to maintain certain safety standards for steel barriers that are installed on the bridge.

Lifetime costs of cerebral palsy

DEFF Research Database (Denmark)

Kruse, Marie; Michelsen, Susan Ishøy; Flachs, Esben Meulengracht

2009-01-01

This study quantified the lifetime costs of cerebral palsy (CP) in a register-based setting. It was the first study outside the US to assess the lifetime costs of CP. The lifetime costs attributable to CP were divided into three categories: health care costs, productivity costs, and social costs....... social care costs and productivity costs associated with CP point to a potential gain from labour market interventions that benefit individuals with CP.......This study quantified the lifetime costs of cerebral palsy (CP) in a register-based setting. It was the first study outside the US to assess the lifetime costs of CP. The lifetime costs attributable to CP were divided into three categories: health care costs, productivity costs, and social costs...... in 2000. The prevalence of CP in eastern Denmark was approximately 1.7 per 1000. Information on productivity and the use of health care was retrieved from registers. The lifetime cost of CP was about euro860 000 for men and about euro800 000 for women. The largest component was social care costs...

Setting-up a cost recovery system for the largest wastewater treatment plant in South-East Asia.

Science.gov (United States)

Lønholdt, J; Elberg Jørgensen, P; O'Hearn, D

2005-01-01

A tariff system has been set up for the largest wastewater treatment plant in South-East Asia, the Samut Prakarn Wastewater Treatment Plant south of Bangkok, which is currently under completion. Fully functional the plant will have a design capacity for 500,000 m3 per day and will service a combined residential and industrial area with approximately 600,000 residents and 2,300 factories. The tariff system, which includes a tariff model, is based on water consumption and BOD load. As background for setting the tariffs a comprehensive monitoring system including an industrial permitting system has been developed. The paper presents the background and rationale for setting up the system as well as the objective, scope and content of the tariff system and the industrial permit system. Further, the feasibility of introducing cost recovery systems, which is widely accepted in developing economies on the conceptual level and to some extent implemented at the legal and regulatory level, but has yet to be implemented at large, is discussed.

Health insurance premium increases for the 5 largest school districts in the United States, 2004-2008.

Science.gov (United States)

Cantillo, John R

2010-03-01

Local school districts are often one of the largest, if not the largest, employers in their respective communities. Like many large employers, school districts offer health insurance to their employees. There is a lack of information about the rate of health insurance premiums in US school districts relative to other employers. To assess the change in the costs of healthcare insurance in the 5 largest public school districts in the United States, between 2004 and 2008, as representative of large public employers in the country. Data for this study were drawn exclusively from a survey sent to the 5 largest public school districts in the United States. The survey requested responses on 3 data elements for each benefit plan offered from 2004 through 2008; these included enrollment, employee costs, and employer costs. The premium growth for the 5 largest school districts has slowed down and is consistent with other purchasers-Kaiser/Health Research & Educational Trust and the Federal Employee Health Benefit Program. The average increase in health insurance premium for the schools was 5.9% in 2008, and the average annual growth rate over the study period was 7.5%. For family coverage, these schools provide the most generous employer contribution (80.8%) compared with the employer contribution reported by other employers (73.5%) for 2008. Often the largest employers in their communities, school districts demonstrate a commitment to provide choice of benefits and affordability for employees and their families. Despite constraints typical of public employers, the 5 largest school districts in the United States have decelerated in premium growth consistent with other purchasers, albeit at a slower pace.

METHODICAL APPROACH TO DEFINING INFRASTRUCTURE COMPONENT OF THE COSTS FOR THE PARTICULAR PASSENGER TRAIN TRAFFIC

Directory of Open Access Journals (Sweden)

Yu. S. Barash

2015-06-01

Full Text Available Purpose. In the scientific paper a methodical approach concerning determining the infrastructure component of the costs for traffic of the particular passenger train should be developed. It takes into account the individual characteristics of the particular train traffic. Methodology. To achieve the research purposes was used a method which is based on apportionment of expenses for the traffic of a particular passenger train taking into account the factors affecting the magnitude of costs. This methodology allows allocating properly infrastructure costs for a particular train and, consequently, to determine the accurate profitability of each train. Findings. All expenditures relating to passenger traffic of a long distance were allocated from first cost of passenger and freight traffic. These costs are divided into four components. Three groups of expenses were allocated in infrastructure component, which are calculated according to the certain principle taking into account the individual characteristics of the particular train traffic. Originality. The allocation method of all passenger transportation costs of all Ukrzaliznytsia departments for a particular passenger train was improved. It is based on principles of general indicators formation of each department costs, which correspond to the main influential factors of operating trains. The methodical approach to determining the cost of infrastructure component is improved, which takes into account the effect of the speed and weight of a passenger train on the wear of the railway track superstructure and contact network. All this allows allocating to reasonably the costs of particular passenger train traffic and to determine its profitability. Practical value. Implementing these methods allows calculating the real, economically justified costs of a particular train that will correctly determine the profitability of a particular passenger train and on this basis it allows to make management

Health Insurance Premium Increases for the 5 Largest School Districts in the United States, 2004–2008

Science.gov (United States)

Cantillo, John R.

2010-01-01

Background Local school districts are often one of the largest, if not the largest, employers in their respective communities. Like many large employers, school districts offer health insurance to their employees. There is a lack of information about the rate of health insurance premiums in US school districts relative to other employers. Objective To assess the change in the costs of healthcare insurance in the 5 largest public school districts in the United States, between 2004 and 2008, as representative of large public employers in the country. Methods Data for this study were drawn exclusively from a survey sent to the 5 largest public school districts in the United States. The survey requested responses on 3 data elements for each benefit plan offered from 2004 through 2008; these included enrollment, employee costs, and employer costs. Results The premium growth for the 5 largest school districts has slowed down and is consistent with other purchasers—Kaiser/Health Research & Educational Trust and the Federal Employee Health Benefit Program. The average increase in health insurance premium for the schools was 5.9% in 2008, and the average annual growth rate over the study period was 7.5%. For family coverage, these schools provide the most generous employer contribution (80.8%) compared with the employer contribution reported by other employers (73.5%) for 2008. Conclusions Often the largest employers in their communities, school districts demonstrate a commitment to provide choice of benefits and affordability for employees and their families. Despite constraints typical of public employers, the 5 largest school districts in the United States have decelerated in premium growth consistent with other purchasers, albeit at a slower pace. PMID:25126311

Bioenergetic components of reproductive effort in viviparous snakes: costs of vitellogenesis exceed costs of pregnancy.

Science.gov (United States)

Van Dyke, James U; Beaupre, Steven J

2011-12-01

Reproductive effort has been defined as the proportion of an organism's energy budget that is allocated to reproduction over a biologically meaningful time period. Historically, studies of reproductive bioenergetics considered energy content of gametes, but not costs of gamete production. Although metabolic costs of vitellogenesis (MCV) fundamentally reflect the primary bioenergetic cost of reproductive allocation in female reptiles, the few investigations that have considered costs of reproductive allocation have focused on metabolic costs of pregnancy (MCP) in viviparous species. We define MCP as energetic costs incurred by pregnant females, including all costs of maintaining gestation conditions necessary for embryogenesis. MCP by our definition do not include fetal costs of embryogenesis. We measured metabolic rates in five species of viviparous snakes (Agkistrodon contortrix, Boa constrictor, Eryx colubrinus, Nerodia sipedon, and Thamnophis sirtalis) during vitellogenesis and pregnancy in order to estimate MCV and MCP. Across all species, MCV were responsible for 30% increases in maternal metabolism. Phylogenetically-independent contrasts showed that MCV were significantly greater in B. constrictor than in other species, likely because B. constrictor yolk energy content was greater than that of other species. Estimates of MCP were not significantly different from zero in any species. In viviparous snakes, MCV appear to represent significant bioenergetic expenditures, while MCP do not. We suggest that MCV, together with yolk energy content, represent the most significant component of reptilian reproductive effort, and therefore deserve greater attention than MCP in studies of reptilian reproductive bioenergetics. Copyright © 2011 Elsevier Inc. All rights reserved.

Analysis of the Photovoltaic Market 2001. Cost of PV Components and Systems

International Nuclear Information System (INIS)

Balenzategui Manzanares, J. L.

2002-01-01

This document tries to study the development and evolution of the photovoltaic market at a national and international scale, and to analyse its current status at the end of 2001. The paper broaches the study from different points of view. At the first step, the actual great expansion of the global market is analysed by means of the data for international sales and shipments of photovoltaic modules, which are completed with figures of the main countries and manufacturing companies involved in the market, the end-use applications, the installed power per country, the technologies used and the evolution of the cost of the modules. By using the same kind of parameters, the particular conditions of the Spanish market is then analysed, and the current national norms and plans for promotion and their short term perspectives are reviewed and discussed. As a complementary aspect, a simple cost analysis of the main components of a photovoltaic system in the Spanish market is carried out, together with the costs of complete installations. The average values for components and systems are obtained and are compared with those from preceding years. These data allow evaluating in practice how the global situation is reflected in the final cost of the photovoltaic devices for consumers. (Author) 56 refs

Reliability of optical fibres and components final report of COST 246

CERN Document Server

Griffioen, Willem; Gadonna, Michel; Limberger, Hans; Heens, Bernard; Knuuttila, Hanna; Kurkjian, Charles; Mirza, Shehzad; Opacic, Aleksandar; Regio, Paola; Semjonov, Sergei

1999-01-01

Reliability of Optical Fibres and Components reports the findings of COST 246 (1993-1998) - European research initiative in the field of optical telecommunications. Experts in the materials and reliability field of optical fibres and components have contributed to this unique study programme. The results, conclusions and achievements of their work have been obtained through joint experimentation and discussion with representatives from manufacturing and research groups. Topics covered include: Lifetime estimation; Failure mechanisms; Ageing test methods; Field data and service environments for components. For the first time the reader can explore the reliability of products and examine the results and conclusions in published form. This comprehensive volume is intended to provide a deeper understanding of the reliability of optical fibres and components. The book will be extremely useful to all scientists and practitioners involved in the industry.

Parts and Components Reliability Assessment: A Cost Effective Approach

Science.gov (United States)

Lee, Lydia

2009-01-01

System reliability assessment is a methodology which incorporates reliability analyses performed at parts and components level such as Reliability Prediction, Failure Modes and Effects Analysis (FMEA) and Fault Tree Analysis (FTA) to assess risks, perform design tradeoffs, and therefore, to ensure effective productivity and/or mission success. The system reliability is used to optimize the product design to accommodate today?s mandated budget, manpower, and schedule constraints. Stand ard based reliability assessment is an effective approach consisting of reliability predictions together with other reliability analyses for electronic, electrical, and electro-mechanical (EEE) complex parts and components of large systems based on failure rate estimates published by the United States (U.S.) military or commercial standards and handbooks. Many of these standards are globally accepted and recognized. The reliability assessment is especially useful during the initial stages when the system design is still in the development and hard failure data is not yet available or manufacturers are not contractually obliged by their customers to publish the reliability estimates/predictions for their parts and components. This paper presents a methodology to assess system reliability using parts and components reliability estimates to ensure effective productivity and/or mission success in an efficient manner, low cost, and tight schedule.

BALU: Largest autoclave research facility in the world

Directory of Open Access Journals (Sweden)

Hakan Ucan

2016-03-01

Full Text Available Among the large-scale facilities operated at the Center for Lightweight-Production-Technology of the German Aerospace Center in Stade BALU is the world's largest research autoclave. With a loading length of 20m and a loading diameter of 5.8 m the main objective of the facility is the optimization of the curing process operated by components made of carbon fiber on an industrial scale. For this reason, a novel dynamic autoclaving control has been developed that is characterized by peripheral devices to expend the performance of the facility for differential applications, by sensing systems to detect the component state throughout the curing process and by a feedback system, which is capable to intervene into the running autoclave process.

Transport, logistics and packaging of ITER components

International Nuclear Information System (INIS)

Guerin, Olivier; Couturier, Bruno; Maas, Akko

2005-01-01

Cadarache, the European site for ITER, is located at around 50km as the crow flies from the sea. The feasibility of the transport of large and heavy ITER components has thus been thoroughly studied. These studies have covered the following items: - possible itineraries between the most convenient harbour (Fos) and Cadarache; - packaging (in particular for the largest and heaviest components); - means of transport (two types of trailers allowing to avoid lifting and load transfers); - logistics (analysis of transfer kinematics, including temporary storage); - administrative procedures and planning for the road adaptation, taking benefit of the recent successful implementation in the south-west of France of an itinerary for the Airbus A380 components. These studies, performed between 2001 and 2003, led to a viable solution, with a reasonable cost, fully supported by the French authorities. The planning necessary to implement the road modifications is also fully compatible with the expected dates of ITER components delivery

20 CFR 228.40 - Cost of living increase applicable to the tier I annuity component.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Cost of living increase applicable to the... § 228.40 Cost of living increase applicable to the tier I annuity component. The tier I annuity... the Federal Register annually. The cost-of-living increase is payable beginning with the benefit for...

SiC/C components for nuclear applications from low cost precursor

International Nuclear Information System (INIS)

Narciso, J.; Calderon, N.R.

2009-01-01

The development of structural materials with the desired properties to produce the components facing the plasma in fusion reactors is one of the key problems in fusion technology. The structural materials used in the first wall and breeder blanket limits the operating temperature of the system, and higher operating temperatures means higher efficiency. Among the advanced material under consideration for those parts (first wall and breeder blanket) SiC based composites offers the greatest potential. However, considerable research is still required in order to solve engineering feasibility and manufacturing issues, as the improvement of the maximum working temperature and the capability of fabrication of components with homogeneous properties at reasonable cost. Last decade, there has been a strong effort in blanket design using SiC f /SiC composites which are rather expensive while excellent mechanical properties are not so mandatory as resistance to neutron irradiation for this application. In this work, an experimental procedure for manufacturing SiC/C composite materials with homogeneous properties from low cost precursors is described. The process consists in classical reactive infiltration of porous carbon preforms by liquid silicon to produce RBSC where the porous carbon preforms are tailor-made for the fabrication of SiC components without residual Si. The proper selection of the feedstock nature and the pyrolysis conditions determine the microstructure and sinterability of the carbon particles, respectively. These two features control the reactivity of the carbon substrate and porosity of the carbon preform for complete infiltration. The absence of silicon and the homogeneous microstructure of the SiC materials produced by this procedure make them suitable for structural applications at temperatures higher than 1200 deg. C. Furthermore, the technique allows near-net-shape capability and the carbon source is a low cost material. (author)

Characterizing and Modeling the Cost of Rework in a Library of Reusable Software Components

Science.gov (United States)

Basili, Victor R.; Condon, Steven E.; ElEmam, Khaled; Hendrick, Robert B.; Melo, Walcelio

1997-01-01

In this paper we characterize and model the cost of rework in a Component Factory (CF) organization. A CF is responsible for developing and packaging reusable software components. Data was collected on corrective maintenance activities for the Generalized Support Software reuse asset library located at the Flight Dynamics Division of NASA's GSFC. We then constructed a predictive model of the cost of rework using the C4.5 system for generating a logical classification model. The predictor variables for the model are measures of internal software product attributes. The model demonstrates good prediction accuracy, and can be used by managers to allocate resources for corrective maintenance activities. Furthermore, we used the model to generate proscriptive coding guidelines to improve programming, practices so that the cost of rework can be reduced in the future. The general approach we have used is applicable to other environments.

Recycling Flight Hardware Components and Systems to Reduce Next Generation Research Costs

Science.gov (United States)

Turner, Wlat

2011-01-01

With the recent 'new direction' put forth by President Obama identifying NASA's new focus in research rather than continuing on a path to return to the Moon and Mars, the focus of work at Kennedy Space Center (KSC) may be changing dramatically. Research opportunities within the micro-gravity community potentially stands at the threshold of resurgence when the new direction of the agency takes hold for the next generation of experimenters. This presentation defines a strategy for recycling flight experiment components or part numbers, in order to reduce research project costs, not just in component selection and fabrication, but in expediting qualification of hardware for flight. A key component of the strategy is effective communication of relevant flight hardware information and available flight hardware components to researchers, with the goal of 'short circuiting' the design process for flight experiments

Cost estimates for near-term depolyment of advanced traffic management systems. Final report

Energy Technology Data Exchange (ETDEWEB)

Stevens, S.S.; Chin, S.M.

1993-02-15

The objective of this study is to provide cost est engineering, design, installation, operation and maintenance of Advanced Traffic Management Systems (ATMS) in the largest 75 metropolitan areas in the United States. This report gives estimates for deployment costs for ATMS in the next five years, subject to the qualifications and caveats set out in following paragraphs. The report considers infrastructure components required to realize fully a functional ATMS over each of two highway networks (as discussed in the Section describing our general assumptions) under each of the four architectures identified in the MITRE Intelligent Vehicle Highway Systems (IVHS) Architecture studies. The architectures are summarized in this report in Table 2. Estimates are given for eight combinations of highway networks and architectures. We estimate that it will cost between $8.5 Billion (minimal network) and $26 Billion (augmented network) to proceed immediately with deployment of ATMS in the largest 75 metropolitan areas. Costs are given in 1992 dollars, and are not adjusted for future inflation. Our estimates are based partially on completed project costs, which have been adjusted to 1992 dollars. We assume that a particular architecture will be chosen; projected costs are broken by architecture.

Determination of the fuel component in the cost price of the energy production in NPP

International Nuclear Information System (INIS)

Lakov, M.; Velev, V.

1997-01-01

An approach is proposed for the determination of the fuel component in the cost price of the nuclear units production with regards of the difference between the time of the fuel consumption and the energy production. This method gives the opportunity for fuel consumption prognostication, as well as an optimization of both short and long term fueling regimes. This approach permits current update of the economic conditions and the pre-history of the investments. It can be used both for the determination of the fuel component and the full cost price of the energy production in NPPs.(author)

Financial cost of the admissions for simultaneous pancreas-kidney transplant in a Brazilian hospital.

Science.gov (United States)

Salzedas-Netto, Alcides Augusto; Gonzalez, Adriano Miziara; Fagundes, Ulysses; Linhares, Marcelo Moura; Vicentine, Fernando Pompeu Piza; Romero, Luis Ramiro Núñez; Martins, José Luis; Pestana, José Osmar Medina; Oliva, Carlos Alberto Garcia

2014-11-01

To perform a cost analysis of simultaneous pancreas-kidney transplantation (SPKT) in a Brazilian hospital. Between January 2008 and December 2011, 105 consecutive SPKTs at the Hospital of Kidney and Hypertension in Sao Paulo were evaluated. We evaluated the patient demographics, payment source (public health system or supplementary system), and the impact of each hospital cost component. The evaluated costs were corrected to December 2011 values and converted to US dollars. Of the 105 SPKT patients, 61.9% were men, and 38.1% were women. Eight patients died, and 97 were discharged (92.4%). Eighty-nine procedures were funded by the public health system. The cost for the patients who were discharged was $18.352.27; the cost for the deceased patients was $18.449.96 (p = 0.79). The FOR for SPKT during this period was positive at $5,620.65. The costs were distributed as follows: supplies, 36%; administrative costs, 20%; physician fees, 15%; intensive care unit, 10%; surgical center, 10%; ward, 9%. Mortality did not affect costs, and supplies were the largest cost component.

Comparative cost-effectiveness of the components of a behavior change communication campaign on HIV/AIDS in North India.

Science.gov (United States)

Sood, Suruchi; Nambiar, Devaki

2006-01-01

Numerous studies show that exposure to entertainment-education-based mass media campaigns is associated with reduction in risk behaviors. Concurrently, there is a growing interest in comparing the cost-effectiveness of HIV prevention interventions taking into account infrastructural and programmatic costs. In such analyses, though few in number, mass media campaigns have fared well. Using data from a mass media communication campaign in the low HIV prevalence states of Uttar Pradesh, Rajasthan, and Delhi in Northern India, in this article we examine the following: (1) factors that mediate behavior change in different components of the campaign, comprising a TV drama, reality show for youth audiences, and TV spots; (2) the relative impact of campaign components on the behavioral outcome: condom use; and (3) the cost-effectiveness calculations arising from this analysis. Results suggest that recall of the TV spots and the TV drama influences behavior change and is strongly associated with interpersonal communication and positive gender attitudes. The TV drama, in spite of being the costliest, emerges as the most cost-effective component when considering the behavioral outcome of interest. The analysis of the comparative cost-effectiveness of individual campaign components provides insights into the planning of resources for communication interventions globally.

Influence of material choice on cost estimation of some key components of the Sulfur Iodine thermochemical process

International Nuclear Information System (INIS)

Gilardi, T.; Rodriguez, G.; Gomez, A.; Leybros, J.; Borgard, J.M.; Carles, P.; Anzieu, P.

2006-01-01

In the frame of the preliminary design of an sulfur/iodine thermochemical plant coupled with a 600 MWth Helium cooled High Temperature Reactor, CEA has pre-designed all the components of the I/S plant and has started to the cost estimation of all the key components with some industrial cost evaluation methods proposed by CHAUVEL or PETER and TIMMERHAUS. The purpose of the paper is to present the strong influence of material choice on final cost estimation of these key components by comparing price with standard material (steel) and the most appropriate material selected to support the strong corrosion involved by several chemical reactions of the I/S process. These results reinforce the fact that material selection must be done with the best accuracy and that it will be a key factor in the global economy of these plant investment. (authors)

Low cost, small form factor, and integration as the key features for the optical component industry takeoff

Science.gov (United States)

Schiattone, Francesco; Bonino, Stefano; Gobbi, Luigi; Groppi, Angelamaria; Marazzi, Marco; Musio, Maurizio

2003-04-01

In the past the optical component market has been mainly driven by performances. Today, as the number of competitors has drastically increased, the system integrators have a wide range of possible suppliers and solutions giving them the possibility to be more focused on cost and also on footprint reduction. So, if performances are still essential, low cost and Small Form Factor issues are becoming more and more crucial in selecting components. Another evolution in the market is the current request of the optical system companies to simplify the supply chain in order to reduce the assembling and testing steps at system level. This corresponds to a growing demand in providing subassemblies, modules or hybrid integrated components: that means also Integration will be an issue in which all the optical component companies will compete to gain market shares. As we can see looking several examples offered by electronic market, to combine low cost and SFF is a very challenging task but Integration can help in achieving both features. In this work we present how these issues could be approached giving examples of some advanced solutions applied to LiNbO3 modulators. In particular we describe the progress made on automation, new materials and low cost fabrication methods for the parts. We also introduce an approach in integrating optical and electrical functionality on LiNbO3 modulators including RF driver, bias control loop, attenuator and photodiode integrated in a single device.

Analysis the Appropriate using Standard Costing Applying in Land Cost Component of Real Estate Development Activities: A Case Study of PT Subur Agung

Directory of Open Access Journals (Sweden)

Elfrida Yanti

2011-05-01

Full Text Available Standard cost is generally used by manufacturing business, which direct material, labor, and factory overhead are cleared allocated. On real estate business in this case PT Subur Agung use standard cost based on three costs, raw land, land improvement and interest expense categories instead of direct material, direct labor and overhead. Developer use these cost to predict the project cost and estimate the pre-selling price, in accordance with the cost estimation classification matrix, the variance range is in the expected accuracy rate by testing the variance percentage between standard cost and actual cost. The additional similar projects in PT Subur Agung also follow the same scope. All these evidences have proved the appropriate using standard costing in land cost component of real estate development activities but how it applies this article will analyze in this particular project with using descriptive and exploratory method. The analysis started by knowing the conceptual situation of PT Subur Agung and the data was presented in tables and calculation with detail explanation. 

Tobacco BY-2 Media Component Optimization for a Cost-Efficient Recombinant Protein Production.

Science.gov (United States)

Häkkinen, Suvi T; Reuter, Lauri; Nuorti, Ninni; Joensuu, Jussi J; Rischer, Heiko; Ritala, Anneli

2018-01-01

Plant cells constitute an attractive platform for production of recombinant proteins as more and more animal-free products and processes are desired. One of the challenges in using plant cells as production hosts has been the costs deriving from expensive culture medium components. In this work, the aim was to optimize the levels of most expensive components in the nutrient medium without compromising the accumulation of biomass and recombinant protein yields. Wild-type BY-2 culture and transgenic tobacco BY-2 expressing green fluorescent protein-Hydrophobin I (GFP-HFBI) fusion protein were used to determine the most inexpensive medium composition. One particularly high-accumulating BY-2 clone, named 'Hulk,' produced 1.1 ± 0.2 g/l GFP-HFBI in suspension and kept its high performance during prolonged subculturing. In addition, both cultures were successfully cryopreserved enabling truly industrial application of this plant cell host. With the optimized culture medium, 43-55% cost reduction with regard to biomass and up to 69% reduction with regard to recombinant protein production was achieved.

Energetic costs of performance in trained and untrained Anolis carolinensis lizards.

Science.gov (United States)

Lailvaux, Simon P; Wang, Andrew Z; Husak, Jerry F

2018-03-12

The energetic costs of performance constitute a non-trivial component of animals' daily energetic budgets. However, we currently lack an understanding of how those costs are partitioned among the various stages of performance development, maintenance, and production. We manipulated individual investment in performance by training Anolis carolinensis lizards for endurance or sprinting ability. We then measured energetic expenditure both at rest and immediately following exercise to test whether such training alters the maintenance and production costs of performance. Trained lizards had lower resting metabolic rates than controls, suggestive of a maintenance saving associated with enhanced performance as opposed to a cost. Production costs also differed, with sprint-trained lizards incurring the largest energetic performance cost and experiencing the longest recovery times compared to endurance trained and control animals. Although performance training modifies metabolism, production costs are probably the key drivers of trade-offs between performance and other life-history traits in this species. © 2018. Published by The Company of Biologists Ltd.

Analysis of the Photovoltaic Market 2001. Cost of PV Components and Systems; Analisis del Mercado Fotovoltaico 2001. Coste de Componentes y Sistemas Fotovoltaicos

Energy Technology Data Exchange (ETDEWEB)

Balenzategui Manzanares, J. L.

2002-07-01

This document tries to study the development and evolution of the photovoltaic market at a national land international scale, and to analyse its current status at the end of 2001. The paper broaches the study from different points of view. At the first step, the actual great expansion of the global market is analysed by means of the data for international sales and shipments of photovoltaic modules which are completed with figures of the main countries and manufacturing companies involved in the market, the end-use applications, the installed power per country, the technologies used and the evolution of the cost of the modules. By using the same kind of parameters, the particular conditions of the Spanish market is then analysed, and the current national norms and plans for promotion and their short-term perspectives are reviewed and discussed. As a complementary/aspect , a simple cost analysis of the main components of a photovoltaic system in the Spanish market is carried out, together with the costs of complete installations. The average values for components and systems are obtained and are compared with those from preceding years. These data allow evaluating in practice how the global situations is reflected in the final cost of the photovoltaic devices for consumers. (Author) 56 refs.

Pragmatic and cost efficient D and D

Energy Technology Data Exchange (ETDEWEB)

Morris, M. [Nuclear Fuel Services, Erwin, TN (United States)

1998-03-01

A great deal of effort is expended by remediation professionals in the pursuit of new technologies to assist them in performing their tasks more efficiently. These individuals understand the cost savings associated with volume reduction and waste minimization and routinely incorporate these practices into their planning. However, the largest cost component on many D and D projects is labor. Increasing the efficiency of work force utilization is frequently the most overlooked technique that can be instituted and which can easily offer major cost savings. Granted, some D and D jobs require highly specialized tools and equipment which are quite expensive. Decreasing these costs is often not an option or will yield minimal results. Conversely, the increase in worker efficiency can usually decrease costs dramatically. During the performance of the Safe Shutdown Project at the Fernald Environmental Management Project (the Fernald site), a process improvement initiative was instituted in support of the development of the Ten Year Plan. Costs associated with the removal of hundreds of thousands of pounds of nuclear material from formerly utilized equipment piping, and ductwork in nuclear facilities at the Fernald site were analyzed. This analysis indicated that the labor component was large enough to merit further inspection. A new approach to the activities was instituted and the results were significant. A macroscopic overview of all work activities utilized work evolution control (sequencing), building segmentation, and efficient use of engineering controls to streamline the D and D process. Overall costs on the first facility were reduced by over 20%. The increased labor efficiency resulted in decreased Personal Protective Equipment costs for field personnel. This approach will be discussed in detail.

Pragmatic and cost efficient D and D

International Nuclear Information System (INIS)

Morris, M.

1998-03-01

A great deal of effort is expended by remediation professionals in the pursuit of new technologies to assist them in performing their tasks more efficiently. These individuals understand the cost savings associated with volume reduction and waste minimization and routinely incorporate these practices into their planning. However, the largest cost component on many D and D projects is labor. Increasing the efficiency of work force utilization is frequently the most overlooked technique that can be instituted and which can easily offer major cost savings. Granted, some D and D jobs require highly specialized tools and equipment which are quite expensive. Decreasing these costs is often not an option or will yield minimal results. Conversely, the increase in worker efficiency can usually decrease costs dramatically. During the performance of the Safe Shutdown Project at the Fernald Environmental Management Project (the Fernald site), a process improvement initiative was instituted in support of the development of the Ten Year Plan. Costs associated with the removal of hundreds of thousands of pounds of nuclear material from formerly utilized equipment piping, and ductwork in nuclear facilities at the Fernald site were analyzed. This analysis indicated that the labor component was large enough to merit further inspection. A new approach to the activities was instituted and the results were significant. A macroscopic overview of all work activities utilized work evolution control (sequencing), building segmentation, and efficient use of engineering controls to streamline the D and D process. Overall costs on the first facility were reduced by over 20%. The increased labor efficiency resulted in decreased Personal Protective Equipment costs for field personnel. This approach will be discussed in detail

Loy Yang A - Australia's largest privatisation

International Nuclear Information System (INIS)

Yenckin, C.

1997-01-01

The recent A$4,746 million privatisation of the 2000MW Loy Yang A power station and the Loy Yang coal mine by the Victorian Government is Australia's largest privatisation and one of 1997's largest project financing deals. (author)

Cost of illness of atrial fibrillation: a nationwide study of societal impact.

Science.gov (United States)

Johnsen, Søren Paaske; Dalby, Lene Worsaae; Täckström, Tomas; Olsen, Jens; Fraschke, Anina

2017-11-10

The prevalence of atrial fibrillation is increasing rapidly; however, to date, population-based data are lacking on the attributable cost of illness of atrial fibrillation from a societal perspective, including both direct and indirect costs. The study was an incidence-based cost-of-illness study based on national registries covering the entire population of Denmark. We identified all patients with a first-time hospital diagnosis of atrial fibrillation between 2001 and 2012. For every atrial fibrillation patient, we identified three age- and sex-matched controls from the general population. Both the total and the attributable costs of atrial fibrillation were estimated based on individual level information on hospital care (in- and out-patient contacts), primary sector care, use of prescription drugs and productivity loss. Average 3-year societal costs per patient attributable to atrial fibrillation were estimated to be €20,403-26,544 during the study period. The costs were highest during the first year after diagnosis of atrial fibrillation. Admission costs constituted the largest cost component, whereas primary sector costs and medicine costs only constituted minor components. The attributable costs were more than two-fold higher among patients experiencing a stroke. The total 3-year cost attributable to atrial fibrillation in Denmark was estimated to be €219-295 million. The societal costs attributable to atrial fibrillation are significant. Reducing the need for hospitalizations, in particular from stroke, is a key factor in controlling the costs.

Product costing program for wood component manufacturers

Science.gov (United States)

Adrienn Andersch; Urs Buehlmann; Jeff Palmer; Janice K Wiedenbeck; Steve. Lawser

2013-01-01

Accurate and timely product costing information is critically important for companies in planning the optimal utilization of company resources. While an overestimation of product costs can lead to loss of potential business and market share, underestimation of product costs can result in financial losses to the company. This article introduces a product costing program...

High Cost/High Risk Components to Chalcogenide Molded Lens Model: Molding Preforms and Mold Technology

Energy Technology Data Exchange (ETDEWEB)

Bernacki, Bruce E.

2012-10-05

This brief report contains a critique of two key components of FiveFocal's cost model for glass compression molding of chalcogenide lenses for infrared applications. Molding preforms and mold technology have the greatest influence on the ultimate cost of the product and help determine the volumes needed to select glass molding over conventional single-point diamond turning or grinding and polishing. This brief report highlights key areas of both technologies with recommendations for further study.

A prospective study to determine the costs incurred by families of children newly diagnosed with cancer in Ontario.

Science.gov (United States)

Tsimicalis, Argerie; Stevens, Bonnie; Ungar, Wendy J; McKeever, Patricia; Greenberg, Mark; Agha, Mohammad; Guerriere, Denise; Barr, Ronald; Naqvi, Ahmed; Moineddin, Rahim

2012-10-01

A diagnosis of cancer in childhood places a considerable economic burden on families, although costs are not well described. The objectives of this study were to identify and determine independent predictors of the direct and time costs incurred by such families. A prospective, cost-of-illness study was conducted in families of children newly diagnosed with cancer. Parents recorded the resources consumed and costs incurred during 1 week per month for three consecutive months beginning the fourth week following diagnosis and listed any additional costs incurred since then. Descriptive and multiple regression analyses were performed to describe families' costs (expressed in 2007 Canadian dollars) and to determine direct and time cost predictors. In total, 28 fathers and 71 mothers participated. The median total direct and time costs in 3 months were $CAD3503 and $CAD23 130, respectively, per family. The largest component of direct costs was travel and of time costs was time allocated previously for unpaid activities. There were no statistically significant predictors of direct costs. Six per cent of the variance for time costs was explained by language spoken at home. Families of children with cancer are confronted with a wide range of direct and time costs, the largest being travel and time allocated previously for unpaid activities. Copyright © 2011 John Wiley & Sons, Ltd.

Haven't We Been Here Before? Some Comments on Steve Coffman's Proposal for "Earth's Largest Library".

Science.gov (United States)

McGervey, Teresa

2000-01-01

Discusses the concept of Earth's Largest Library (ELL), a mega-virtual library based on the Amazon.com model. Topics include who will be included; privacy; censorship; scope of the collection; costs; legal aspects; collection development; personnel management; access; the concept of community; public service; lending policies; technical…

Data Collection for Current U.S. Wind Energy Projects: Component Costs, Financing, Operations, and Maintenance; January 2011 - September 2011

Energy Technology Data Exchange (ETDEWEB)

Martin-Tretton, M.; Reha, M.; Drunsic, M.; Keim, M.

2012-01-01

DNV Renewables (USA) Inc. (DNV) used an Operations and Maintenance (O&M) Cost Model to evaluate ten distinct cost scenarios encountered under variations in wind turbine component failure rates. The analysis considers: (1) a Reference Scenario using the default part failure rates within the O&M Cost Model, (2) High Failure Rate Scenarios that increase the failure rates of three major components (blades, gearboxes, and generators) individually, (3) 100% Replacement Scenarios that model full replacement of these components over a 20 year operating life, and (4) Serial Failure Scenarios that model full replacement of blades, gearboxes, and generators in years 4 to 6 of the wind project. DNV selected these scenarios to represent a broad range of possible operational experiences. Also in this report, DNV summarizes the predominant financing arrangements used to develop wind energy projects over the past several years and provides summary data on various financial metrics describing those arrangements.

The Dependence of the Cost of Capital on Degree of Diversification

Directory of Open Access Journals (Sweden)

Zoran Popovic

2018-03-01

Full Text Available The subject of this paper are theoretical and methodological aspects of determining the cost of capital on the example of two companies from the Energoprojekt system. The goal is to point out the most significant problems of determining the cost of capital in general, as well as to identify the most significant determinants of those costs. In addition, the paper has a goal to point out to the degree of impact of diversification of those two companies on the cost of their capital. Using the CAPM, the total cost of capital is calculated for Energoprojekt Holding and Energoprojekt Industrija. In accordance with that, the following hypotheses are formulated: (H0 The value of the beta coefficient of both enterprises is equal to zero, (H1 Volatility of the yield of shares of both companies is higher than the entire market, (H2 The total cost of the Holding's capital is lower than the total cost of the capital of Industrija and (H3 The largest component of the equity cost in both companies is the country risk premium. The first, second and third research hypotheses are confirmed in the paper, while the null hypothesis is rejected. The total cost of capital for Holding is equal to 14,80% and the total cost of capital for Industrija is 17,10%. The main component of the cost of equity is the risk premium of investing in Serbia, which is exceptionally high and is equal to 6,40%.

Determinants of the property damage costs of tanker accidents

International Nuclear Information System (INIS)

Talley, W.K.

1999-01-01

This study investigates determinants of the vessel, oil cargo spillage, and other-property damage costs of tanker accidents. Tobit estimation of a three-equation recursive model suggests that, among types of tanker accidents, fire/explosion accidents incur the largest vessel damage costs, but the smallest oil cargo spillage costs. Alternatively, grounding accidents incur the smallest vessel damage costs, but the largest oil cargo spillage costs, reflecting the difficulty of controlling oil cargo spillage subsequent to such accidents. Also, oil cargo spillage costs are lower for US flag tanker accidents. A dollar of vessel damage cost increases other-property damage cost by 0.06 dollars, whereas a dollar of oil cargo spillage increases this cost by 1.55 dollars

Computerized cost estimation spreadsheet and cost data base for fusion devices

International Nuclear Information System (INIS)

Hamilton, W.R.; Rothe, K.E.

1985-01-01

Component design parameters (weight, surface area, etc.) and cost factors are input and direct and indirect costs are calculated. The cost data base file derived from actual cost experience within the fusion community and refined to be compatible with the spreadsheet costing approach is a catalog of cost coefficients, algorithms, and component costs arranged into data modules corresponding to specific components and/or subsystems. Each data module contains engineering, equipment, and installation labor cost data for different configurations and types of the specific component or subsystem. This paper describes the assumptions, definitions, methodology, and architecture incorporated in the development of the cost estimation spreadsheet and cost data base, along with the type of input required and the output format

Cost reduction in the production process using the ABC and Lean tools: Case Study in the refrigeration components industry

Directory of Open Access Journals (Sweden)

Levi da Silva Guimarães

2015-03-01

Full Text Available This paper focuses on production management with respect to operating costs that relate directly to the value of the product. For this study, three methods were used, ABC - Activity Based Costing, which provides accurate information about the knowledge of the real costs, VSM - Value Stream Mapping and Lean Manufacturing. The method adopted for this research was the case study. The study was conducted at a refrigeration components company in the Industrial Center of Manaus. The analyses and observations initially went through the process of mapping the value stream, measuring the current state of activities (cycle time, setup, etc.. After analysis it was possible to map the cost for each activity and finally calculate the cost of the product before and after the improvements resulting from the lean methodology. The results obtained in this study showed a 20% reduction in product costs resulting from operational improvements. The activity-based cost led to a discovery of the real costs of waste. The steps for this study include process mapping through the value stream, measuring the current state of activities (cycle time, setup, etc., establishing the cost driver for each activity, and finally calculating the cost of the product before and after the application of lean improvements. The paper was conducted through literature and descriptive review, and used a case study method. It describes the model that has been tested in a production line for a refrigeration components company from the Manaus Industrial Center, achieving a 20% reduction in product cost.

Cost-consequence analysis of multimodal interventions with environmental components for pediatric asthma in the state of Maryland.

Science.gov (United States)

Jassal, Mandeep S; Diette, Gregory B; Dowdy, David W

2013-08-01

Applied environmental strategies for asthma control are often expensive, but may save longer-term healthcare costs. Whether these savings outweigh additional costs of implementing these strategies is uncertain. We conducted a systematic review to estimate the expenditures and savings of environmental interventions for asthma in the state of Maryland. Direct costs included hospitalizations, emergency room, and clinic visits. Indirect expenditures included costs of lost work productivity and travel incurred during the usage of healthcare services. We used decision analysis, assuming a hypothetical cohort of the approximated 49,290 pediatric individuals in Maryland with persistent asthma, to compare costs and benefits of environmental asthma interventions against the standard of care (no intervention) from the societal perspective. Three interventions among nine articles met the inclusion criteria for the systematic review: 1) environmental education using medical professionals; 2) education using non-medical personnel; and 3) multi-component strategy involving education with non-medical personnel, allergen-impermeable covers, and pest management. All interventions were found to be cost-saving relative to the standard of care. Home environmental education using non-medical professionals yielded the highest net savings of $14.1 million (95% simulation interval (SI): $-.283 million, $19.4 million), while the multi-component intervention resulted in the lowest net savings of $8.1 million (95% SI: $-4.9 million, $15.9 million). All strategies were most sensitive to the baseline number of hospitalizations in those not receiving targeted interventions for asthma. Limited environmental reduction strategies for asthma are likely to be cost-saving to the healthcare system in Maryland and should be considered for broader scale-up in other economically similar settings.

U.S. Department of Energy Hydrogen Storage Cost Analysis

Energy Technology Data Exchange (ETDEWEB)

Law, Karen; Rosenfeld, Jeffrey; Han, Vickie; Chan, Michael; Chiang, Helena; Leonard, Jon

2013-03-11

. In general, tank costs are the largest component of system cost, responsible for at least 30 percent of total system cost, in all but two of the 12 systems. Purchased BOP cost also drives system cost, accounting for 10 to 50 percent of total system cost across the various storage systems. Potential improvements in these cost drivers for all storage systems may come from new manufacturing processes and higher production volumes for BOP components. In addition, advances in the production of storage media may help drive down overall costs for the sodium alanate, SBH, LCH2, MOF, and AX-21 systems.

Costs and cost-effectiveness of delivering intermittent preventive treatment through schools in western Kenya

Directory of Open Access Journals (Sweden)

Jukes Matthew CH

2008-09-01

Full Text Available Abstract Background Awareness of the potential impact of malaria among school-age children has stimulated investigation into malaria interventions that can be delivered through schools. However, little evidence is available on the costs and cost-effectiveness of intervention options. This paper evaluates the costs and cost-effectiveness of intermittent preventive treatment (IPT as delivered by teachers in schools in western Kenya. Methods Information on actual drug and non-drug associated costs were collected from expenditure and salary records, government budgets and interviews with key district and national officials. Effectiveness data were derived from a cluster-randomised-controlled trial of IPT where a single dose of sulphadoxine-pyrimethamine and three daily doses of amodiaquine were provided three times in year (once termly. Both financial and economic costs were estimated from a provider perspective, and effectiveness was estimated in terms of anaemia cases averted. A sensitivity analysis was conducted to assess the impact of key assumptions on estimated cost-effectiveness. Results The delivery of IPT by teachers was estimated to cost US$ 1.88 per child treated per year, with drug and teacher training costs constituting the largest cost components. Set-up costs accounted for 13.2% of overall costs (equivalent to US$ 0.25 per child whilst recurrent costs accounted for 86.8% (US$ 1.63 per child per year. The estimated cost per anaemia case averted was US$ 29.84 and the cost per case of Plasmodium falciparum parasitaemia averted was US$ 5.36, respectively. The cost per case of anaemia averted ranged between US$ 24.60 and 40.32 when the prices of antimalarial drugs and delivery costs were varied. Cost-effectiveness was most influenced by effectiveness of IPT and the background prevalence of anaemia. In settings where 30% and 50% of schoolchildren were anaemic, cost-effectiveness ratios were US$ 12.53 and 7.52, respectively. Conclusion This

Unit cost of healthcare services at 200-bed public hospitals in Myanmar: what plays an important role of hospital budgeting?

Science.gov (United States)

Than, Thet Mon; Saw, Yu Mon; Khaing, Moe; Win, Ei Mon; Cho, Su Myat; Kariya, Tetsuyoshi; Yamamoto, Eiko; Hamajima, Nobuyuki

2017-09-19

Cost information is important for efficient allocation of healthcare expenditure, estimating future budget allocation, and setting user fees to start new financing systems. Myanmar is in political transition, and trying to achieve universal health coverage by 2030. This study assessed the unit cost of healthcare services at two public hospitals in the country from the provider perspective. The study also analyzed the cost structure of the hospitals to allocate and manage the budgets appropriately. A hospital-based cross-sectional study was conducted at 200-bed Magway Teaching Hospital (MTH) and Pyinmanar General Hospital (PMN GH), in Myanmar, for the financial year 2015-2016. The step-down costing method was applied to calculate unit cost per inpatient day and per outpatient visit. The costs were calculated by using Microsoft Excel 2010. The unit costs per inpatient day varied largely from unit to unit in both hospitals. At PMN GH, unit cost per inpatient day was 28,374 Kyats (27.60 USD) for pediatric unit and 1,961,806 Kyats (1908.37 USD) for ear, nose, and throat unit. At MTH, the unit costs per inpatient day were 19,704 Kyats (19.17 USD) for medicine unit and 168,835 Kyats (164.24 USD) for eye unit. The unit cost of outpatient visit was 14,882 Kyats (14.48 USD) at PMN GH, while 23,059 Kyats (22.43 USD) at MTH. Regarding cost structure, medicines and medical supplies was the largest component at MTH, and the equipment was the largest component at PMN GH. The surgery unit of MTH and the eye unit of PMN GH consumed most of the total cost of the hospitals. The unit costs were influenced by the utilization of hospital services by the patients, the efficiency of available resources, type of medical services provided, and medical practice of the physicians. The cost structures variation was also found between MTH and PMN GH. The findings provided the basic information regarding the healthcare cost of public hospitals which can apply the efficient utilization of the

A 'cost-effective' probabilistic model to select the dominant factors affecting the variation of the component failure rate

International Nuclear Information System (INIS)

Kirchsteiger, C.

1992-11-01

Within the framework of a Probabilistic Safety Assessment (PSA), the component failure rate λ is a key parameter in the sense that the study of its behavior gives the essential information for estimating the current values as well as the trends in the failure probabilities of interest. Since there is an infinite variety of possible underlying factors which might cause changes in λ (e.g. operating time, maintenance practices, component environment, etc.), an 'importance ranking' process of these factors is considered most desirable to prioritize research efforts. To be 'cost-effective', the modeling effort must be small, i.e. essentially involving no estimation of additional parameters other than λ. In this paper, using a multivariate data analysis technique and various statistical measures, such a 'cost-effective' screening process has been developed. Dominant factors affecting the failure rate of any components of interest can easily be identified and the appropriateness of current research plans (e.g. on the necessity of performing aging studies) can be validated. (author)

Cost-of-illness analysis of type 2 diabetes mellitus in Iran.

Directory of Open Access Journals (Sweden)

Mehdi Javanbakht

Full Text Available Diabetes is a worldwide high prevalence chronic progressive disease that poses a significant challenge to healthcare systems. The aim of this study is to provide a detailed economic burden of diagnosed type 2 diabetes mellitus (T2DM and its complications in Iran in 2009 year.This is a prevalence-based cost-of-illness study focusing on quantifying direct health care costs by bottom-up approach. Data on inpatient hospital services, outpatient clinic visits, physician services, drugs, laboratory test, education and non-medical cost were collected from two national registries. The human capital approach was used to calculate indirect costs separately in male and female and also among different age groups.The total national cost of diagnosed T2DM in 2009 is estimated at 3.78 billion USA dollars (USD including 2.04±0.28 billion direct (medical and non-medical costs and indirect costs of 1.73 million. Average direct and indirect cost per capita was 842.6±102 and 864.8 USD respectively. Complications (48.9% and drugs (23.8% were main components of direct cost. The largest components of medical expenditures attributed to diabetes's complications are cardiovascular disease (42.3% of total Complications cost, nephropathy (23% and ophthalmic complications (14%. Indirect costs include temporarily disability (335.7 million, permanent disability (452.4 million and reduced productivity due to premature mortality (950.3 million.T2DM is a costly disease in the Iran healthcare system and consume more than 8.69% of total health expenditure. In addition to these quantified costs, T2DM imposes high intangible costs on society in terms of reduced quality of life. Identification of effective new strategies for the control of diabetes and its complications is a public health priority.

Rehabilitation of the 6 largest hydropower plants in the Republic of Macedonia

International Nuclear Information System (INIS)

Chingoski, Vlatko; Savevski, Vasil

2004-01-01

In 1998, ESM (Electric Power Co. of Macedonia) received a loan from the International Bank for Reconstruction and Development (IBRD - The World bank) for the cost of the Power System Improvement Project, major part of which is the partial rehabilitation of the six largest HPPs in the Republic of Macedonia. Rehabilitation and life extension of these six largest hydro power plants is given the highest priority in the whole Power System Improvement Project mainly because these HPPs are, in general, fairly old, older than most of the thermal generation capacity and because a significant part of their equipment is wearing out, or is now obsolete with spare parts difficult to obtain. Furthermore, these plants play a vital role in the Macedonian Power System, providing peaking capacity, reserve capacity and frequency control. With the realization of this project, greater hydropower production is expected. It is also expected that HPPs will become a more vital part of the Macedonian Power System, which is also beneficial from an environmental aspect, due to greater usage of renewable energy resources in the country. (Original)

Cost-effective conservation planning: lessons from economics.

Science.gov (United States)

Duke, Joshua M; Dundas, Steven J; Messer, Kent D

2013-08-15

Economists advocate that the billions of public dollars spent on conservation be allocated to achieve the largest possible social benefit. This is "cost-effective conservation"-a process that incorporates both monetized benefits and costs. Though controversial, cost-effective conservation is poorly understood and rarely implemented by planners. Drawing from the largest publicly financed conservation programs in the United States, this paper seeks to improve the communication from economists to planners and to overcome resistance to cost-effective conservation. Fifteen practical lessons are distilled, including the negative implications of limiting selection with political constraints, using nonmonetized benefit measures or benefit indices, ignoring development risk, using incomplete cost measures, employing cost measures sequentially, and using benefit indices to capture costs. The paper highlights interrelationships between benefits and complications such as capitalization and intertemporal planning. The paper concludes by identifying the challenges at the research frontier, including incentive problems associated with adverse selection, additionality, and slippage. Copyright © 2013 Elsevier Ltd. All rights reserved.

Market impact costs of institutional equity trades

NARCIS (Netherlands)

Bikker, Jacob A.; Spierdijk, Laura; van der Sluis, Pieter Jelle

2007-01-01

This article analyzes market impact costs of equity trading by one of the world's largest pension funds. We find that, on average, these costs are small in terms of market disruption, but substantial in terms of costs for the pension fund. Average market impact costs equal 20 basis points for buys

Market Impact Costs of Institutional Equity Trades

NARCIS (Netherlands)

Bikker, J.A.; Spierdijk, L.; van der Sluis, P.J.

2008-01-01

This article analyzes market impact costs of equity trading by one of the world's largest pension funds. We find that, on average, these costs are small in terms of market disruption, but substantial in terms of costs for the pension fund. Average market impact costs equal 20 basis points for buys

Market Impact Costs of Institutional Equity Trades

NARCIS (Netherlands)

van der Sluis, P.J.; Bikker, J.A.; Spierdijk, L.

2007-01-01

This article analyzes market impact costs of equity trading by one of the world's largest pension funds. We find that, on average, these costs are small in terms of market disruption, but substantial in terms of costs for the pension fund. Average market impact costs equal 20 basis points for buys

Computerized cost estimation spreadsheet and cost data base for fusion devices

International Nuclear Information System (INIS)

Hamilton, W.R.; Rothe, K.E.

1985-01-01

An automated approach to performing and cataloging cost estimates has been developed at the Fusion Engineering Design Center (FEDC), wherein the cost estimate record is stored in the LOTUS 1-2-3 spreadsheet on an IBM personal computer. The cost estimation spreadsheet is based on the cost coefficient/cost algorithm approach and incorporates a detailed generic code of cost accounts for both tokamak and tandem mirror devices. Component design parameters (weight, surface area, etc.) and cost factors are input, and direct and indirect costs are calculated. The cost data base file derived from actual cost experience within the fusion community and refined to be compatible with the spreadsheet costing approach is a catalog of cost coefficients, algorithms, and component costs arranged into data modules corresponding to specific components and/or subsystems. Each data module contains engineering, equipment, and installation labor cost data for different configurations and types of the specific component or subsystem. This paper describes the assumptions, definitions, methodology, and architecture incorporated in the development of the cost estimation spreadsheet and cost data base, along with the type of input required and the output format

Fatigue Reliability Analysis of Wind Turbine Cast Components

DEFF Research Database (Denmark)

Rafsanjani, Hesam Mirzaei; Sørensen, John Dalsgaard; Fæster, Søren

2017-01-01

.) and to quantify the relevant uncertainties using available fatigue tests. Illustrative results are presented as obtained by statistical analysis of a large set of fatigue data for casted test components typically used for wind turbines. Furthermore, the SN curves (fatigue life curves based on applied stress......The fatigue life of wind turbine cast components, such as the main shaft in a drivetrain, is generally determined by defects from the casting process. These defects may reduce the fatigue life and they are generally distributed randomly in components. The foundries, cutting facilities and test...... facilities can affect the verification of properties by testing. Hence, it is important to have a tool to identify which foundry, cutting and/or test facility produces components which, based on the relevant uncertainties, have the largest expected fatigue life or, alternatively, have the largest reliability...

Cost per severe accident as an index for severe accident consequence assessment and its applications

International Nuclear Information System (INIS)

Silva, Kampanart; Ishiwatari, Yuki; Takahara, Shogo

2014-01-01

The Fukushima Accident emphasizes the need to integrate the assessments of health effects, economic impacts, social impacts and environmental impacts, in order to perform a comprehensive consequence assessment of severe accidents in nuclear power plants. “Cost per severe accident” is introduced as an index for that purpose. The calculation methodology, including the consequence analysis using level 3 probabilistic risk assessment code OSCAAR and the calculation method of the cost per severe accident, is proposed. This methodology was applied to a virtual 1,100 MWe boiling water reactor. The breakdown of the cost per severe accident was provided. The radiation effect cost, the relocation cost and the decontamination cost were the three largest components. Sensitivity analyses were carried out, and parameters sensitive to cost per severe accident were specified. The cost per severe accident was compared with the amount of source terms, to demonstrate the performance of the cost per severe accident as an index to evaluate severe accident consequences. The ways to use the cost per severe accident for optimization of radiation protection countermeasures and for estimation of the effects of accident management strategies are discussed as its applications. - Highlights: • Cost per severe accident is used for severe accident consequence assessment. • Assessments of health, economic, social and environmental impacts are included. • Radiation effect, relocation and decontamination costs are important cost components. • Cost per severe accident can be used to optimize radiation protection measures. • Effects of accident management can be estimated using the cost per severe accident

Spectral behavior of a low-cost all-fiber component based on untapered multifiber unions

OpenAIRE

Rodriguez Horche, Paloma; López-Amo Sainz, Manuel; Muriel Fernández, Miguel Ángel; Martín Pereda, José Antonio

1989-01-01

Untapered multifiber unions are reported to show a spectral behavior similar to the tapered ones. Their oscillatory behavior does not depend on the biconical regions. This suggests a novel way to make low-cost all-fiber devices with applications as passive components such as optical filters and wavelength multiplexers/demultiplexers. Two types of multimode fibers have been studied and information about the index profile influence has been obtained. Polarization insensitivity and temperature s...

Estimating the recreational value of Pakistan's largest freshwater lake to support sustainable tourism management using a travel cost model

NARCIS (Netherlands)

Mangan, T.; Brouwer, R.; Lohano, H.; Nagraj, G.M.

2013-01-01

Keenjhar Lake, Pakistan's largest freshwater lake and an important Ramsar site, provides habitat for internationally important water birds. Annually, 385,000 people visit the lake. The lake is threatened by a variety of causes, including industrial and agricultural pollution. To support its

Largest College Endowments, 2011

Science.gov (United States)

Chronicle of Higher Education, 2012

2012-01-01

Of all endowments valued at more than $250-million, the UCLA Foundation had the highest rate of growth over the previous year, at 49 percent. This article presents a table of the largest college endowments in 2011. The table covers the "rank," "institution," "market value as of June 30, 2011," and "1-year change" of institutions participating in…

Removal of Shippingport Station primary system components and piping

International Nuclear Information System (INIS)

LaGuardia, T.S.; Lipsett, S.M.

1987-01-01

The dismantling workscope for the Shippingport Station Decommissioning Project was divided into subtasks to permit the work to be subcontracted to the maximum extent practicable. Major subtasks were identified and described by Activity specifications which could then be grouped into logical work packages to be put out for bid. Two of the largest dismantling work packages, removal of piping and components, were grouped together and designated as Activity Specifications 4 and 5. TLG Services, Inc. and Cleveland Wrecking Company formed a Joint Venture to perform this work during a two-year period at a cost of approximately $7 million. The major portions of this dismantling workscope are described. The primary system components within this workscope consist of the stainless steel reactor coolant piping, check valves, reactor coolant pumps, steam generators, and reactor purification demineralizers and coolers. The work performed, the heavy rigging preparations and procedures, the cutting tools used, component draining/capping techniques to prevent spills, contamination containment, airborne control techniques, and lessons learned during the removal of these primary system components are described. Summaries of crew size and composition, labor hours, duration hours and radiation exposure to workers are provided and discussed briefly. The successful completion of this work is evidence of the engineering, planning, equipment, materials and labor pool available to remove large, radioactively contaminated components safely. This experience will help decommissioning planners to prepare for the removal of reactor components in future decommissioning

Transforming the Reserve Component: Four Essays

National Research Council Canada - National Science Library

Binnendijk, Hans; Baranick, Michael J; Bell, Raymond E., Jr; Cordero, Gina; Duncan, Stephen M; Holshek, Christopher; Wentz, Larry

2005-01-01

.... The first essay calls for a fundamental restructuring of the Reserve Component in light of the largest mobilization since the Korean War, which has been fraught with problems in terms of combat...

Cost Estimating Handbook for Environmental Restoration

International Nuclear Information System (INIS)

1993-01-01

Environmental restoration (ER) projects have presented the DOE and cost estimators with a number of properties that are not comparable to the normal estimating climate within DOE. These properties include: An entirely new set of specialized expressions and terminology. A higher than normal exposure to cost and schedule risk, as compared to most other DOE projects, due to changing regulations, public involvement, resource shortages, and scope of work. A higher than normal percentage of indirect costs to the total estimated cost due primarily to record keeping, special training, liability, and indemnification. More than one estimate for a project, particularly in the assessment phase, in order to provide input into the evaluation of alternatives for the cleanup action. While some aspects of existing guidance for cost estimators will be applicable to environmental restoration projects, some components of the present guidelines will have to be modified to reflect the unique elements of these projects. The purpose of this Handbook is to assist cost estimators in the preparation of environmental restoration estimates for Environmental Restoration and Waste Management (EM) projects undertaken by DOE. The DOE has, in recent years, seen a significant increase in the number, size, and frequency of environmental restoration projects that must be costed by the various DOE offices. The coming years will show the EM program to be the largest non-weapons program undertaken by DOE. These projects create new and unique estimating requirements since historical cost and estimating precedents are meager at best. It is anticipated that this Handbook will enhance the quality of cost data within DOE in several ways by providing: The basis for accurate, consistent, and traceable baselines. Sound methodologies, guidelines, and estimating formats. Sources of cost data/databases and estimating tools and techniques available at DOE cost professionals

Grid-connected photovoltaic systems for Malaysian residential sector: Effects of component costs, feed-in tariffs, and carbon taxes

International Nuclear Information System (INIS)

Lau, K.Y.; Muhamad, N.A.; Arief, Y.Z.; Tan, C.W.; Yatim, A.H.M.

2016-01-01

Blessed with abundant solar radiation, Malaysia has a huge potential for grid-connected PV (photovoltaic) installations, particularly for its fast-growing residential sector. Nevertheless, Malaysia's PV installation capacity is relatively small compared with the global PV capacity. Significantly, the pricing mechanisms for grid-connected PV projects need to be appropriately assessed to build up the public's confidence to invest in PV projects. In this paper, we analyze the effects of component costs, FiTs (feed-in tariffs), and carbon taxes on grid-connected PV systems in Malaysian residential sector using the HOMER (Hybrid Optimization of Multiple Energy Resources) software. Results demonstrate that the implementation of grid-connected PV systems is highly feasible with PV array costs of $ 1120/kW or lower. For higher PV array costs up to $ 2320/kW, introducing an FiT rate three times higher ($ 0.30/kWh) than the grid tariff for a 100 kW grid sale capacity will, NPC-wise, prioritize grid-connected PV systems over the utility grid. By implementing the FiT ($ 0.50/kWh) and the carbon tax ($ 36/metric ton) schemes simultaneously, grid-connected PV systems will remain as the optimal systems even for costly PV arrays (up to $ 4000/kW). The findings are of paramount importance as far as PV pricing variability is concerned. - Highlights: • Grid-connected PV for Malaysian residential sector has been analyzed using HOMER. • Component costs, feed-in tariffs, and carbon taxes affect optimal system types. • Grid-connected PV projects are feasible for low PV array costs ($ 1120/kW or lower). • For higher PV array and inverter costs, feed-in tariffs should be implemented. • Combining feed-in tariffs with carbon taxes are effective for further lowering NPCs.

Health Effects of Bioactive Components in Plant Foods; Results and Opinion of the EU-COST926 Action

NARCIS (Netherlands)

Verkerk, R.; Piskula, M.; Bovy, Arnaud; Dekker, M.

2014-01-01

This paper reviews the main results of EU-action: “COST 926: Impact of new technologies on the health benefits and safety of bioactive plant compounds”. The bioavailability and the effects on gene expression of various bioactive components in plant foods are described in relation with their

A low-cost transportable ground station for capture and processing of direct broadcast EOS satellite data

Science.gov (United States)

Davis, Don; Bennett, Toby; Short, Nicholas M., Jr.

1994-01-01

The Earth Observing System (EOS), part of a cohesive national effort to study global change, will deploy a constellation of remote sensing spacecraft over a 15 year period. Science data from the EOS spacecraft will be processed and made available to a large community of earth scientists via NASA institutional facilities. A number of these spacecraft are also providing an additional interface to broadcast data directly to users. Direct broadcast of real-time science data from overhead spacecraft has valuable applications including validation of field measurements, planning science campaigns, and science and engineering education. The success and usefulness of EOS direct broadcast depends largely on the end-user cost of receiving the data. To extend this capability to the largest possible user base, the cost of receiving ground stations must be as low as possible. To achieve this goal, NASA Goddard Space Flight Center is developing a prototype low-cost transportable ground station for EOS direct broadcast data based on Very Large Scale Integration (VLSI) components and pipelined, multiprocessing architectures. The targeted reproduction cost of this system is less than $200K. This paper describes a prototype ground station and its constituent components.

Developing Cost-Effective Field Assessments of Carbon Stocks in Human-Modified Tropical Forests.

Science.gov (United States)

Berenguer, Erika; Gardner, Toby A; Ferreira, Joice; Aragão, Luiz E O C; Camargo, Plínio B; Cerri, Carlos E; Durigan, Mariana; Oliveira Junior, Raimundo C; Vieira, Ima C G; Barlow, Jos

2015-01-01

Across the tropics, there is a growing financial investment in activities that aim to reduce emissions from deforestation and forest degradation, such as REDD+. However, most tropical countries lack on-the-ground capacity to conduct reliable and replicable assessments of forest carbon stocks, undermining their ability to secure long-term carbon finance for forest conservation programs. Clear guidance on how to reduce the monetary and time costs of field assessments of forest carbon can help tropical countries to overcome this capacity gap. Here we provide such guidance for cost-effective one-off field assessments of forest carbon stocks. We sampled a total of eight components from four different carbon pools (i.e. aboveground, dead wood, litter and soil) in 224 study plots distributed across two regions of eastern Amazon. For each component we estimated survey costs, contribution to total forest carbon stocks and sensitivity to disturbance. Sampling costs varied thirty-one-fold between the most expensive component, soil, and the least, leaf litter. Large live stems (≥10 cm DBH), which represented only 15% of the overall sampling costs, was by far the most important component to be assessed, as it stores the largest amount of carbon and is highly sensitive to disturbance. If large stems are not taxonomically identified, costs can be reduced by a further 51%, while incurring an error in aboveground carbon estimates of only 5% in primary forests, but 31% in secondary forests. For rapid assessments, necessary to help prioritize locations for carbon- conservation activities, sampling of stems ≥20cm DBH without taxonomic identification can predict with confidence (R2 = 0.85) whether an area is relatively carbon-rich or carbon-poor-an approach that is 74% cheaper than sampling and identifying all the stems ≥10cm DBH. We use these results to evaluate the reliability of forest carbon stock estimates provided by the IPCC and FAO when applied to human-modified forests

Developing Cost-Effective Field Assessments of Carbon Stocks in Human-Modified Tropical Forests.

Directory of Open Access Journals (Sweden)

Erika Berenguer

Full Text Available Across the tropics, there is a growing financial investment in activities that aim to reduce emissions from deforestation and forest degradation, such as REDD+. However, most tropical countries lack on-the-ground capacity to conduct reliable and replicable assessments of forest carbon stocks, undermining their ability to secure long-term carbon finance for forest conservation programs. Clear guidance on how to reduce the monetary and time costs of field assessments of forest carbon can help tropical countries to overcome this capacity gap. Here we provide such guidance for cost-effective one-off field assessments of forest carbon stocks. We sampled a total of eight components from four different carbon pools (i.e. aboveground, dead wood, litter and soil in 224 study plots distributed across two regions of eastern Amazon. For each component we estimated survey costs, contribution to total forest carbon stocks and sensitivity to disturbance. Sampling costs varied thirty-one-fold between the most expensive component, soil, and the least, leaf litter. Large live stems (≥10 cm DBH, which represented only 15% of the overall sampling costs, was by far the most important component to be assessed, as it stores the largest amount of carbon and is highly sensitive to disturbance. If large stems are not taxonomically identified, costs can be reduced by a further 51%, while incurring an error in aboveground carbon estimates of only 5% in primary forests, but 31% in secondary forests. For rapid assessments, necessary to help prioritize locations for carbon- conservation activities, sampling of stems ≥20cm DBH without taxonomic identification can predict with confidence (R2 = 0.85 whether an area is relatively carbon-rich or carbon-poor-an approach that is 74% cheaper than sampling and identifying all the stems ≥10cm DBH. We use these results to evaluate the reliability of forest carbon stock estimates provided by the IPCC and FAO when applied to human

Largest particle detector nearing completion

CERN Multimedia

2006-01-01

"Construction of another part of the Large Hadron Collider (LHC), the worl's largest particle accelerator at CERN in Switzerland, is nearing completion. The Compact Muon Solenoid (CMS) is oner of the LHC project's four large particle detectors. (1/2 page)

Canada's largest co-gen project

International Nuclear Information System (INIS)

Salaff, S.

2000-01-01

In November 2000, the TransAlta Energy Corp. began construction on its $400 million natural gas fuelled cogeneration project in Sarnia Ontario. The Sarnia Regional Cogeneration Project (SRCP) is designed to integrate a new 440 MW cogeneration facility to be built at the Sarnia Division of Dow Chemicals Canada Inc. with nearby existing generators totaling 210 MW at Dow and Bayer Inc. At 650 MW, the new facility will rank as Canada's largest cogeneration installation. Commercial operation is scheduled for October 2002. TransAlta owns three natural gas fuelled cogeneration facilities in Ontario (in Ottawa, Mississauga and Windsor) totaling 250 MW. The cost of electric power in Ontario is currently controlled by rising natural gas prices and the supply demand imbalance. This balance will be significantly affected by the possible return to service of 2000 MW of nuclear generating capacity. The SRCP project was announced just prior to the Ontario Energy Competition Act of October 1998 which committed the province to introduce competition to the electricity sector and which created major uncertainties in the electricity market. Some of the small, 25 MW projects which survived the market uncertainty included the Toronto-based Toromont Energy Ltd. project involving gas fuelled cogeneration and methane gas generation from landfill projects in Sudbury and Waterloo. It was emphasized that cogeneration and combined heat and power projects have significant environmental advantages over large combined cycle facilities. The Ontario Energy Board is currently considering an application from TransAlta to link the SRCP facility to Ontario's Hydro One Network Inc.'s transmission grid. 1 fig

The cost of obesity for nonbariatric inpatient operative procedures in the United States: national cost estimates obese versus nonobese patients.

Science.gov (United States)

Mason, Rodney J; Moroney, Jolene R; Berne, Thomas V

2013-10-01

To evaluate the economic impact of obesity on hospital costs associated with the commonest nonbariatric, nonobstetrical surgical procedures. Health care costs and obesity are both rising. Nonsurgical costs associated with obesity are well documented but surgical costs are not. National cost estimates were calculated from the Healthcare Cost and Utilization Project (HCUP) Nationwide Inpatient Sample (NIS) database, 2005-2009, for the highest volume nonbariatric nonobstetric procedures. Obesity was identified from the HCUP-NIS severity data file comorbidity index. Costs for obese patients were compared with those for nonobese patients. To control for medical complexity, each obese patient was matched one-to-one with a nonobese patient using age, sex, race, and 28 comorbid defined elements. Of 2,309,699 procedures, 439,8129 (19%) were successfully matched into 2 medically equal groups (obese vs nonobese). Adjusted total hospital costs incurred by obese patients were 3.7% higher with a significantly (P cost of $648 (95% confidence interval [CI]: $556-$736) compared with nonobese patients. Of the 2 major components of hospital costs, length of stay was significantly increased in obese patients (mean difference = 0.0253 days, 95% CI: 0.0225-0.0282) and resource utilization determined by costs per day were greater in obese patients due to an increased number of diagnostic and therapeutic procedures needed postoperatively (odds ratio [OR] = 0.94, 95% CI: 0.93-0.96). Postoperative complications were equivalent in both groups (OR = 0.97, 95% CI: 0.93-1.02). Annual national hospital expenditures for the largest volume surgical procedures is an estimated $160 million higher in obese than in a comparative group of nonobese patients.

Analysis of the production and transaction costs of forest carbon offset projects in the USA.

Science.gov (United States)

Galik, Christopher S; Cooley, David M; Baker, Justin S

2012-12-15

Forest carbon offset project implementation costs, comprised of both production and transaction costs, could present an important barrier to private landowner participation in carbon offset markets. These costs likewise represent a largely undocumented component of forest carbon offset potential. Using a custom spreadsheet model and accounting tool, this study examines the implementation costs of different forest offset project types operating in different forest types under different accounting and sampling methodologies. Sensitivity results are summarized concisely through response surface regression analysis to illustrate the relative effect of project-specific variables on total implementation costs. Results suggest that transaction costs may represent a relatively small percentage of total project implementation costs - generally less than 25% of the total. Results also show that carbon accounting methods, specifically the method used to establish project baseline, may be among the most important factors in driving implementation costs on a per-ton-of-carbon-sequestered basis, dramatically increasing variability in both transaction and production costs. This suggests that accounting could be a large driver in the financial viability of forest offset projects, with transaction costs likely being of largest concern to those projects at the margin. Copyright © 2012 Elsevier Ltd. All rights reserved.

Cost and radiation exposure optimization of demineralizer operation

International Nuclear Information System (INIS)

Bernal, F.E.; Burn, R.R.; Cook, G.M.; Simonetti, L.; Simpson, P.A.

1985-01-01

A pool water demineralizer is utilized at a research reactor to minimize impurities that become radioactive; to minimize impurities that react chemically with reactor components; to maintain optical clarity of the pool water; and to minimize aluminum fuel cladding corrosion by maintaining a slightly acidic pH. Balanced against these advantages are the dollar costs of equipment, resins, recharging chemicals, and maintenance; the man-rem costs of radiation exposure during maintenance, demineralizer recharges, and resin replacement; and hazardous chemical exposure. At the Ford Nuclear Reactor (FNR), maintenance of the demineralizer system is the second largest source of radiation exposure to operators. Theoretical and practical aspects of demineralizer operation are discussed. The most obvious way to reduce radiation exposure due to demineralizer system operation is to perform recharges after the reactor has been shut down for the maximum possible time. Setting a higher depletion limit and operating with the optimum system lineup reduce the frequency between recharges, saving both exposure and cost. Recharge frequency and resin lifetime seem to be relatively independent of the quality of the chemicals used and the personnel performing recharges, provided consistent procedures are followed

Delivery Unit Costs for Antiretroviral Treatment and Prevention of Mother-to-Child-Transmission of HIV

Science.gov (United States)

Galárraga, Omar; Wirtz, Veronika J.; Figueroa-Lara, Alejandro; Santa-Ana-Tellez, Yared; Coulibaly, Ibrahima; Viisainen, Kirsi; Medina-Lara, Antonieta; Korenromp, Eline L.

2013-01-01

Background As antiretroviral treatment (ART) for HIV/AIDS is scaled-up globally, information on per-person costs is critical to improve efficiency in service delivery and maximize coverage and health impact. Objective To review studies on delivery unit costs for adult and pediatric ART provision per-patient-year, and prevention of mother-to-child transmission (PMTCT) interventions per mother-infant pair screened or treated, in low- and middle-income countries. Methods Systematic review of English, French and Spanish publications from 2001 to 2009, reporting empirical costing that accounted for at least antiretroviral (ARV) medicines, laboratory testing and personnel. Expenditures were analyzed by country income level and cost component. All costs were standardized to 2009 US dollars. Results Analyses covered 29 eligible, comprehensive costing studies. In the base case, in low-income countries (LIC), median, ART cost per patient-year was $792 (mean: $839, range: $682-$1089); for lower-middle-income countries (LMIC), the median was $932 (mean: $1246, range: $156-$3904); and for upper-middle-income countries (UMIC) the median was $1454 (mean: $2783, range: $1230-$5667). ARV drugs were largest component of overall ART cost in all settings (62%, 50% and 47% in LIC, LMIC and UMIC respectively). Out of 26 ART studies, 14 report which drug regimes were used, and only one study explicitly reported second line treatment costs. The second cost driver was laboratory cost in LIC and LMIC (14% and 19.5%) whereas it was personnel costs in UMIC (26%). Two studies specified the types of laboratory tests costed, and three studies specifically included above-facility-level personnel costs. Three studies reported detailed PMTCT costs, and two studies reported on pediatric ART. Conclusions There is a paucity of data on the full ART and PMTCT delivery unit costs, in particular for low-and middle-income countries. Heterogeneity in activities costed and insufficient detail regarding

Integrating tuberculosis and HIV services for people living with HIV: Costs of the Zambian ProTEST Initiative

Directory of Open Access Journals (Sweden)

Kayawe Ignatius

2008-01-01

Full Text Available Abstract Background In the face of the dual TB/HIV epidemic, the ProTEST Initiative was one of the first to demonstrate the feasibility of providing collaborative TB/HIV care for people living with HIV (PLWH in poor settings. The ProTEST Initiative facilitated collaboration between service providers. Voluntary counselling and testing (VCT acted as the entry point for services including TB screening and preventive therapy, clinical treatment for HIV-related disease, and home-based care (HBC, and a hospice. This paper estimates the costs of the ProTEST Initiative in two sites in urban Zambia, prior to the introduction of anti-retroviral therapy. Methods Annual financial and economic providers costs and output measures were collected in 2000–2001. Estimates are made of total costs for each component and average costs per: person reached by ProTEST; VCT pre-test counselled, tested and completed; isoniazid preventive therapy started and completed; clinic visit; HBC patient; and hospice admission and bednight. Results Annual core ProTEST costs were (in 2007 US dollars $84,213 in Chawama and $31,053 in Matero. The cost of coordination was 4%–5% of total site costs ($1–$6 per person reached. The largest cost component in Chawama was voluntary counselling and testing (56% and the clinic in Matero (50%, where VCT clients had higher HIV-prevalences and more advanced HIV. Average costs were lower for all components in the larger site. The cost per HBC patient was $149, and per hospice bednight was $24. Conclusion This study shows that coordinating an integrated and comprehensive package of services for PLWH is relatively inexpensive. The lessons learnt in this study are still applicable today in the era of ART, as these services must still be provided as part of the continuum of care for people living with HIV.

Photovoltaic energy cost limit

International Nuclear Information System (INIS)

Coiante, D.

1992-01-01

Referring to a photovoltaic system for grid connected applications, a parametric expression of kWh cost is derived. The limit of kWh cost is carried out extrapolating the values of cost components to their lowest figure. The reliability of the forecast is checked by disaggregating kWh cost in direct and indirect costs and by discussing the possible cost reduction of each component

Low-cost manufacturing of the point focus concentrating module and its key component, the Fresnel lens. Final subcontract report, 31 January 1991--6 May 1991

Energy Technology Data Exchange (ETDEWEB)

Saifee, T.; Konnerth, A. III [Solar Kinetics, Inc., Dallas, TX (United States)

1991-11-01

Solar Kinetics, Inc. (SKI) has been developing point-focus concentrating PV modules since 1986. SKI is currently in position to manufacture between 200 to 600 kilowatts annually of the current design by a combination of manual and semi-automated methods. This report reviews the current status of module manufacture and specifies the required approach to achieve a high-volume manufacturing capability and low cost. The approach taken will include process development concurrent with module design for automated manufacturing. The current effort reviews the major manufacturing costs and identifies components and processes whose improvements would produce the greatest effect on manufacturability and cost reduction. The Fresnel lens is one such key component. Investigating specific alternative manufacturing methods and sources has substantially reduced the lens costs and has exceeded the DOE cost-reduction goals. 15 refs.

Carbon and energy fluxes from China's largest freshwater lake

Science.gov (United States)

Gan, G.; LIU, Y.

2017-12-01

Carbon and energy fluxes between lakes and the atmosphere are important aspects of hydrology, limnology, and ecology studies. China's largest freshwater lake, the Poyang lake experiences tremendous water-land transitions periodically throughout the year, which provides natural experimental settings for the study of carbon and energy fluxes. In this study, we use the eddy covariance technique to explore the seasonal and diurnal variation patterns of sensible and latent heat fluxes of Poyang lake during its high-water and low-water periods, when the lake is covered by water and mudflat, respectively. We also determine the annual NEE of Poyang lake and the variations of NEE's components: Gross Primary Productivity (GPP) and Ecosystem Respiration (Re). Controlling factors of seasonal and diurnal variations of carbon and energy fluxes are analyzed, and land cover impacts on the variation patterns are also studied. Finally, the coupling between the carbon and energy fluxes are analyzed under different atmospheric, boundary stability and land cover conditions.

Tax compliance costs: A review of cost burdens and cost structures

OpenAIRE

Eichfelder, Sebastian; Vaillancourt, François

2014-01-01

Our paper provides a comprehensive report of empirical research on tax compliance costs. Compared to previous reviews, our focus is on average costs for sub-groups (individual taxpayers, small business-es, large businesses) and the composition of the cost burden with regards to different cost components(in-house time effort, external adviser costs, other monetary expenses), different taxes (e.g. income tax, value added tax) and different activities like tax accounting and tax planning. In add...

Cost evaluation of reproductive and primary health care mobile service delivery for women in two rural districts in South Africa.

Directory of Open Access Journals (Sweden)

Kathryn Schnippel

Full Text Available Cervical cancer screening is a critical health service that is often unavailable to women in under-resourced settings. In order to expand access to this and other reproductive and primary health care services, a South African non-governmental organization established a van-based mobile clinic in two rural districts in South Africa. To inform policy and budgeting, we conducted a cost evaluation of this service delivery model.The evaluation was retrospective (October 2012-September 2013 for one district and April-September 2013 for the second district and conducted from a provider cost perspective. Services evaluated included cervical cancer screening, HIV counselling and testing, syndromic management of sexually transmitted infections (STIs, breast exams, provision of condoms, contraceptives, and general health education. Fixed costs, including vehicle purchase and conversion, equipment, operating costs and mobile clinic staffing, were collected from program records and public sector pricing information. The number of women accessing different services was multiplied by ingredients-based variable costs, reflecting the consumables required. All costs are reported in 2013 USD.Fixed costs accounted for most of the total annual costs of the mobile clinics (85% and 94% for the two districts; the largest contributor to annual fixed costs was staff salaries. Average costs per patient were driven by the total number of patients seen, at $46.09 and $76.03 for the two districts. Variable costs for Pap smears were higher than for other services provided, and some services, such as breast exams and STI and tuberculosis symptoms screening, had no marginal cost.Staffing costs are the largest component of providing mobile health services to rural communities. Yet, in remote areas where patient volumes do not exceed nursing staff capacity, incorporating multiple services within a cervical cancer screening program is an approach to potentially expand access to

Estimating Power Outage Cost based on a Survey for Industrial Customers

Science.gov (United States)

Yoshida, Yoshikuni; Matsuhashi, Ryuji

A survey was conducted on power outage cost for industrial customers. 5139 factories, which are designated energy management factories in Japan, answered their power consumption and the loss of production value due to the power outage in an hour in summer weekday. The median of unit cost of power outage of whole sectors is estimated as 672 yen/kWh. The sector of services for amusement and hobbies and the sector of manufacture of information and communication electronics equipment relatively have higher unit cost of power outage. Direct damage cost from power outage in whole sectors reaches 77 billion yen. Then utilizing input-output analysis, we estimated indirect damage cost that is caused by the repercussion of production halt. Indirect damage cost in whole sectors reaches 91 billion yen. The sector of wholesale and retail trade has the largest direct damage cost. The sector of manufacture of transportation equipment has the largest indirect damage cost.

Alternative Fuels Data Center: America's Largest Home Runs on Biodiesel in

Science.gov (United States)

North Carolina America's Largest Home Runs on Biodiesel in North Carolina to someone by E-mail Share Alternative Fuels Data Center: America's Largest Home Runs on Biodiesel in North Carolina on Facebook Tweet about Alternative Fuels Data Center: America's Largest Home Runs on Biodiesel in North

A cost-effectiveness analysis of three components of a syndromic surveillance system for the early warning of epidemics in rural China.

Science.gov (United States)

Ding, Yan; Sauerborn, Rainer; Xu, Biao; Shaofa, Nie; Yan, Weirong; Diwan, Vinod K; Dong, Hengjin

2015-11-14

Syndromic surveillance systems (SSSs) collect non-specific syndromes in early stages of disease outbreaks. This makes an SSS a promising tool for the early detection of epidemics. An Integrated Surveillance System in rural China (ISSC project), which added an SSS to the existing Chinese surveillance system for the early warning of epidemics, was implemented from April 2012 to March 2014 in Jiangxi and Hubei Provinces. This study aims to measure the costs and effectiveness of the three components of the SSS in the ISSC project. The central measures of the cost-effectiveness analysis of the three components of the syndromic surveillance system were: 1) the costs per reported event, respectively, at the health facilities, the primary schools and the pharmacies; and 2) the operating costs per surveillance unit per year, respectively, at the health facilities, the primary schools and the pharmacies. Effectiveness was expressed by reporting outputs which were numbers of reported events, numbers of raw signals, and numbers of verified signals. The reported events were tracked through an internal data base. Signal verification forms and epidemiological investigation reports were collected from local country centers for disease control and prevention. We adopted project managers' perspective for the cost analysis. Total costs included set-up costs (system development and training) and operating costs (data collection, quality control and signal verification). We used self-designed questionnaires to collect cost data and received, respectively, 369 and 477 facility and staff questionnaires through a cross-sectional survey with a purposive sampling following the ISSC project. All data were entered into Epidata 3.02 and exported to Stata for descriptive analysis. The number of daily reported events per unit was the highest at pharmacies, followed by health facilities and finally primary schools. Variances existed within the three groups and also between Jiangxi and Hubei

Optimization of Reliability Centered Maintenance Bassed on Maintenance Costs and Reliability with Consideration of Location of Components

Directory of Open Access Journals (Sweden)

Mahdi Karbasian

2011-03-01

Full Text Available The reliability of designing systems such as electrical and electronic circuits, power generation/ distribution networks and mechanical systems, in which the failure of a component may cause the whole system failure, and even the reliability of cellular manufacturing systems that their machines are connected to as series are critically important. So far approaches for improving the reliability of these systems have been mainly based on the enhancement of inherent reliability of any system component or increasing system reliability based on maintenance strategies. Also in some of the resources, only the influence of the location of systems' components on reliability is studied. Therefore, it seems other approaches have been rarely applied. In this paper, a multi criteria model has been proposed to perform a balance among a system's reliability, location costs, and its system maintenance. Finally, a numerical example has been presented and solved by the Lingo software.

Opportunities for biodiversity gains under the world's largest reforestation programme

Science.gov (United States)

Hua, Fangyuan; Wang, Xiaoyang; Zheng, Xinlei; Fisher, Brendan; Wang, Lin; Zhu, Jianguo; Tang, Ya; Yu, Douglas W.; Wilcove, David S.

2016-01-01

Reforestation is a critical means of addressing the environmental and social problems of deforestation. China's Grain-for-Green Program (GFGP) is the world's largest reforestation scheme. Here we provide the first nationwide assessment of the tree composition of GFGP forests and the first combined ecological and economic study aimed at understanding GFGP's biodiversity implications. Across China, GFGP forests are overwhelmingly monocultures or compositionally simple mixed forests. Focusing on birds and bees in Sichuan Province, we find that GFGP reforestation results in modest gains (via mixed forest) and losses (via monocultures) of bird diversity, along with major losses of bee diversity. Moreover, all current modes of GFGP reforestation fall short of restoring biodiversity to levels approximating native forests. However, even within existing modes of reforestation, GFGP can achieve greater biodiversity gains by promoting mixed forests over monocultures; doing so is unlikely to entail major opportunity costs or pose unforeseen economic risks to households. PMID:27598524

Identifying the node spreading influence with largest k-core values

International Nuclear Information System (INIS)

Lin, Jian-Hong; Guo, Qiang; Dong, Wen-Zhao; Tang, Li-Ying; Liu, Jian-Guo

2014-01-01

Identifying the nodes with largest spreading influence of complex networks is one of the most promising domains. By taking into account the neighbors' k-core values, we present an improved neighbors' k-core (INK) method which is the sum of the neighbors' k-core values with a tunable parameter α to evaluate the node spreading influence with largest k-core values. Comparing with the Susceptible–Infected–Recovered (SIR) results for four real networks, the INK method could identify the node spreading influence with largest k-core values more accurately than the ones generated by the degree k, closeness C, betweenness B and coreness centrality method. - Highlights: • We present an improved neighbors' k-core (INK) method to evaluate the node spreading influence with largest k-core values. • The INK method could identify the node spreading influence with largest k-core values more accurately. • Kendall's tau τ of INK method with α=1 are highly identical to rank the node influence

Green Component Procurement Collaboration for Improving Supply Chain Management in the High Technology Industries: A Case Study from the Systems Perspective

Directory of Open Access Journals (Sweden)

Min-Ren Yan

2016-01-01

Full Text Available The impacts of high technology industries have been growing increasingly to technological innovations and global economic developments, while the concerns in sustainability are calling for facilitating green materials and cleaner production in the industrial value chains. Today’s manufacturing companies are not striving for individual capacities but for the effective working with green supply chains. However, in addition to environmental and social objectives, cost and economic feasibility has become one of the most critical success factors for improving supply chain management with green component procurement collaboration, especially for the electronics OEM (original equipment manufacturing companies whose procurement costs often make up a very high proportion of final product prices. This paper presents a case study from the systems perspective by using System Dynamics simulation analysis and statistical validations with empirical data. Empirical data were collected from Taiwanese manufacturing chains—among the world’s largest manufacturing clusters of high technology components and products—and their global green suppliers to examine the benefits of green component procurement collaborations in terms of shared costs and improved shipping time performance. Two different supply chain collaboration models, from multi-layer ceramic capacitor (MLCC and universal serial bus 3.0 (USB 3.0 cable procurements, were benchmarked and statistically validated. The results suggest that the practices of collaborative planning for procurement quantity and accurate fulfillment by suppliers are significantly related to cost effectiveness and shipping time efficiency. Although the price negotiation of upstream raw materials for the collaborative suppliers has no statistically significant benefit to the shipping time efficiency, the shared cost reduction of component procurement is significantly positive for supply chain collaboration among green

Review of the cost components of introducing industrially fortified rice.

Science.gov (United States)

Roks, Eveline

2014-09-01

Micronutrient deficiencies affect over two billion people worldwide, particularly in developing countries. Fortification of staple foods with multiple micronutrients is a cost-effective strategy to increase vitamin and mineral intake. The objective of this paper is to review the cost elements of industrially fortified rice by identifying the costs related to the implementation of rice fortification programs, using the experience of the United Nations World Food Programme in its pilot countries. The actual total costs of rice fortification are not easily captured. Core cost elements include the production of fortified rice kernels, transportation to the point of blending, blending of fortified with unfortified rice, costs related to sales or distribution, quality control and assurance, and additional planning. In the introduction phase, organizations or coalitions seeking to advance rice fortification will face additional costs related to the initiation of rice fortification. In the scale-up phase, greater efficiency in the supply chain and economies of scale can be expected. Different cost elements are normally borne by different stakeholders. This makes the implementation of rice fortification programs a feasible option to reach vulnerable populations with inadequate access to affordable nutrition solutions. © 2014 New York Academy of Sciences.

Lightweight custom composite prosthetic components using an additive manufacturing-based molding technique.

Science.gov (United States)

Leddy, Michael T; Belter, Joseph T; Gemmell, Kevin D; Dollar, Aaron M

2015-01-01

Additive manufacturing techniques are becoming more prominent and cost-effective as 3D printing becomes higher quality and more inexpensive. The idea of 3D printed prosthetics components promises affordable, customizable devices, but these systems currently have major shortcomings in durability and function. In this paper, we propose a fabrication method for custom composite prostheses utilizing additive manufacturing, allowing for customizability, as well the durability of professional prosthetics. The manufacturing process is completed using 3D printed molds in a multi-stage molding system, which creates a custom finger or palm with a lightweight epoxy foam core, a durable composite outer shell, and soft urethane gripping surfaces. The composite material was compared to 3D printed and aluminum materials using a three-point bending test to compare stiffness, as well as gravimetric measurements to compare weight. The composite finger demonstrates the largest stiffness with the lowest weight compared to other tested fingers, as well as having customizability and lower cost, proving to potentially be a substantial benefit to the development of upper-limb prostheses.

CERN tests largest superconducting solenoid magnet

CERN Multimedia

2006-01-01

"CERN's Compacts Muon Solenoid (CMS) - the world's largest superconducting solenoid magnet - has reached full field in testing. The instrument is part of the proton-proton Large Hadron Collider (LHC) project, located in a giant subterranean chamber at Cessy on the Franco-Swiss border." (1 page)

Cost per remission and cost per response with infliximab, adalimumab, and golimumab for the treatment of moderately-to-severely active ulcerative colitis.

Science.gov (United States)

Toor, Kabirraaj; Druyts, Eric; Jansen, Jeroen P; Thorlund, Kristian

2015-06-01

To determine the short-term costs per sustained remission and sustained response of three tumor necrosis factor inhibitors (infliximab, adalimumab, and golimumab) in comparison to conventional therapy for the treatment of moderately-to-severely active ulcerative colitis. A probabilistic Markov model was developed. This included an 8-week induction period, and 22 subsequent 2-week cycles (up to 1 year). The model included three disease states: remission, response, and relapse. Costs were from a Canadian public payer perspective. Estimates for the additional cost per 1 year of sustained remission and sustained response were obtained. Golimumab 100 mg provided the lowest cost per additional remission ($935) and cost per additional response ($701) compared with conventional therapy. Golimumab 50 mg yielded slightly higher costs than golimumab 100 mg. Infliximab was associated with the largest additional number of estimated remissions and responses, but also higher cost at $1975 per remission and $1311 per response. Adalimumab was associated with the largest cost per remission ($7430) and cost per response ($2361). The cost per additional remission and cost per additional response associated with infliximab vs golimumab 100 mg was $14,659 and $4753, respectively. The results suggest that the additional cost of 1 full year of remission and response are lowest with golimumab 100 mg, followed by golimumab 50 mg. Although infliximab has the highest efficacy, it did not exhibit the lowest cost per additional remission or response. Adalimumab produced the highest cost per additional remission and response.

Forecasting market impact costs and identifying expensive trades

NARCIS (Netherlands)

Bikker, J.A.; Spierdijk, L.; Hoevenaars, R.P.M.M.; van der Sluis, P.J.

Often, a relatively small group of trades causes the major part of the trading costs on an investment portfolio. For the equity trades studied in this paper, executed by the world's second largest pension fund, we find that only 10% of all trades determines 75% of total market impact costs.

Cost analysis and exploratory cost-effectiveness of youth-friendly sexual and reproductive health services in the Republic of Moldova

Science.gov (United States)

2014-01-01

Background Youth-friendly sexual and reproductive health services (YFHS) have high priority in many countries. Yet, little is known about the cost and cost-effectiveness of good quality YFHS in resource limited settings. This paper analyses retrospectively costs and potential cost-effectiveness of four well performing youth-friendly health centres (YFHC) in Moldova. This study assesses: (1) what were the costs of YFHSs at centre level, (2) how much would scaling-up to a national good quality YFHS programme cost, and (3) was the programme potentially cost-effective? Methods Four well performing YFHCs were selected for the study. YFHS costs were analysed per centre, funding source, service and person reached. The costing results were extrapolated to estimate cost of a good quality national YFHS programme in Moldova. A threshold analysis was carried out to estimate the required impact level for the YFHSs to break-even (become cost saving). Results Average annual cost of a well performing YFHC was USD 26,000 in 2011. 58% was financed by the National Health Insurance Company and the rest by external donors (42%). Personnel salaries were the largest expense category (47%). The annual implementation costs of a good quality YFHSs in all 38 YFHCs of Moldova were estimated to be USD 1.0 million. The results of the threshold analysis indicate that the annual break-even impact points in a YFHC for: 1) STI services would be >364 averted STIs, 2) early pregnancy and contraceptive services >178 averted unwanted pregnancies, and 3) HIV services only >0.65 averted new HIV infections. Conclusions The costing results highlight the following: 1) significant additional resources would be required for implementation of a good quality national YFHS programme, 2) the four well performing YFHCs rely heavily on external funding (42%), 3) which raises questions about financial sustainability of the programme. At the same time results of the threshold analysis are encouraging. The result

Cost analysis and exploratory cost-effectiveness of youth-friendly sexual and reproductive health services in the Republic of Moldova.

Science.gov (United States)

Kempers, Jari; Ketting, Evert; Lesco, Galina

2014-07-21

Youth-friendly sexual and reproductive health services (YFHS) have high priority in many countries. Yet, little is known about the cost and cost-effectiveness of good quality YFHS in resource limited settings. This paper analyses retrospectively costs and potential cost-effectiveness of four well performing youth-friendly health centres (YFHC) in Moldova. This study assesses: (1) what were the costs of YFHSs at centre level, (2) how much would scaling-up to a national good quality YFHS programme cost, and (3) was the programme potentially cost-effective? Four well performing YFHCs were selected for the study. YFHS costs were analysed per centre, funding source, service and person reached. The costing results were extrapolated to estimate cost of a good quality national YFHS programme in Moldova. A threshold analysis was carried out to estimate the required impact level for the YFHSs to break-even (become cost saving). Average annual cost of a well performing YFHC was USD 26,000 in 2011. 58% was financed by the National Health Insurance Company and the rest by external donors (42%). Personnel salaries were the largest expense category (47%). The annual implementation costs of a good quality YFHSs in all 38 YFHCs of Moldova were estimated to be USD 1.0 million. The results of the threshold analysis indicate that the annual break-even impact points in a YFHC for: 1) STI services would be >364 averted STIs, 2) early pregnancy and contraceptive services >178 averted unwanted pregnancies, and 3) HIV services only >0.65 averted new HIV infections. The costing results highlight the following: 1) significant additional resources would be required for implementation of a good quality national YFHS programme, 2) the four well performing YFHCs rely heavily on external funding (42%), 3) which raises questions about financial sustainability of the programme. At the same time results of the threshold analysis are encouraging. The result suggest that, together the three SRH

Nuclear fuel cycle cost and cost calculation

International Nuclear Information System (INIS)

Schmiedel, P.; Schricker, W.

1975-01-01

Four different methods of calculating the cost of the fuel cycle are explained, starting from the individual cost components with their specific input data. The results (for LWRs) are presented in tabular form and in the form of diagrams. (RB) [de

Analysis of Human Standing Balance by Largest Lyapunov Exponent

Directory of Open Access Journals (Sweden)

Kun Liu

2015-01-01

Full Text Available The purpose of this research is to analyse the relationship between nonlinear dynamic character and individuals’ standing balance by the largest Lyapunov exponent, which is regarded as a metric for assessing standing balance. According to previous study, the largest Lyapunov exponent from centre of pressure time series could not well quantify the human balance ability. In this research, two improvements were made. Firstly, an external stimulus was applied to feet in the form of continuous horizontal sinusoidal motion by a moving platform. Secondly, a multiaccelerometer subsystem was adopted. Twenty healthy volunteers participated in this experiment. A new metric, coordinated largest Lyapunov exponent was proposed, which reflected the relationship of body segments by integrating multidimensional largest Lyapunov exponent values. By using this metric in actual standing performance under sinusoidal stimulus, an obvious relationship between the new metric and the actual balance ability was found in the majority of the subjects. These results show that the sinusoidal stimulus can make human balance characteristics more obvious, which is beneficial to assess balance, and balance is determined by the ability of coordinating all body segments.

Cheap versus expensive trades: Assessing the determinants of market impact costs

NARCIS (Netherlands)

Bikker, J.A.; Spierdijk, L.; van der Sluis, P.J.

2005-01-01

This paper assesses the determinants of market impact costs of institutional equity trades, using unique data from the world's second largest pension fund. We allow the impact of trade characteristics and market conditions on trading costs to depend on the level of trading costs itself and establish

2-component heating systems

Energy Technology Data Exchange (ETDEWEB)

Radtke, W

1987-03-01

The knowledge accumulated only recently of the damage to buildings and the hazards of formaldehyde, radon and hydrocarbons has been inducing louder calls for ventilation, which, on their part, account for the fact that increasing importance is being attached to the controlled ventilation of buildings. Two-component heating systems provide for fresh air and thermal comfort in one. While the first component uses fresh air blown directly and controllably into the rooms, the second component is similar to the Roman hypocaustic heating systems, meaning that heated outer air is circulating under the floor, thus providing for hot surfaces and thermal comfort. Details concerning the two-component heating system are presented along with systems diagrams, diagrams of the heating system and tables identifying the respective costs. Descriptions are given of the two systems components, the fast heat-up, the two-component made, the change of air, heat recovery and control systems. Comparative evaluations determine the differences between two-component heating systems and other heating systems. Conclusive remarks are dedicated to energy conservation and comparative evaluations of costs. (HWJ).

Examining the production costs of antiretroviral drugs.

Science.gov (United States)

Pinheiro, Eloan; Vasan, Ashwin; Kim, Jim Yong; Lee, Evan; Guimier, Jean Marc; Perriens, Joseph

2006-08-22

To present direct manufacturing costs and price calculations of individual antiretroviral drugs, enabling those responsible for their procurement to have a better understanding of the cost structure of their production, and to indicate the prices at which these antiretroviral drugs could be offered in developing country markets. Direct manufacturing costs and factory prices for selected first and second-line antiretroviral drugs were calculated based on cost structure data from a state-owned company in Brazil. Prices for the active pharmaceutical ingredients (API) were taken from a recent survey by the World Health Organization (WHO). The calculated prices for antiretroviral drugs are compared with quoted prices offered by privately-owned, for-profit manufacturers. The API represents the largest component of direct manufacturing costs (55-99%), while other inputs, such as salaries, equipment costs, and scale of production, have a minimal impact. The calculated prices for most of the antiretroviral drugs studied fall within the lower quartile of the range of quoted prices in developing country markets. The exceptions are those drugs, primarily for second-line therapy, for which the API is either under patent, in short supply, or in limited use in developing countries (e.g. abacavir, lopinavir/ritonavir, nelfinavir, saquinavir). The availability of data on the cost of antiretroviral drug production and calculation of factory prices under a sustainable business model provide benchmarks that bulk purchasers of antiretroviral drugs could use to negotiate lower prices. While truly significant price decreases for antiretroviral drugs will depend largely on the future evolution of API prices, the present study demonstrates that for several antiretroviral drugs price reduction is currently possible. Whether or not these reductions materialize will depend on the magnitude of indirect cost and profit added by each supplier over the direct production costs. The ability to

Maintenance cost models in deregulated power systems under opportunity costs

International Nuclear Information System (INIS)

Al-Arfaj, K.; Dahal, K.; Azaiez, M.N.

2007-01-01

In a centralized power system, the operator is responsible for scheduling maintenance. There are different types of maintenance, including corrective maintenance; predictive maintenance; preventive maintenance; and reliability-centred maintenance. The main cause of power failures is poor maintenance. As such, maintenance costs play a significant role in deregulated power systems. They include direct costs associated with material and labor costs as well as indirect costs associated with spare parts inventory, shipment, test equipment, indirect labor, opportunity costs and cost of failure. In maintenance scheduling and planning, the cost function is the only component of the objective function. This paper presented the results of a study in which different components of maintenance costs were modeled. The maintenance models were formulated as an optimization problem with single and multiple objectives and a set of constraints. The maintenance costs models could be used to schedule the maintenance activities of power generators more accurately and to identify the best maintenance strategies over a period of time as they consider failure and opportunity costs in a deregulated environment. 32 refs., 4 tabs., 4 figs

Least-cost Paths - Some Methodological Issues

Directory of Open Access Journals (Sweden)

Irmela Herzog

2014-06-01

Full Text Available This article deals with methodological issues connected with least-cost path (LCP calculations in archaeology. The number of LCP studies in archaeology has increased rapidly during the last couple of years, but not all of the approaches applied are based on an appropriate model and implementation. Many archaeologists rely on standard GIS software with default settings for calculating LCPs and are not aware of possible alternatives and the pitfalls that are described in this article. After briefly introducing the aims and applications of LCP methods in archaeology, LCP algorithms are discussed. The outcome of the LCP calculations depends not only on the algorithm but also on the cost model, which often includes several cost components. The discussion of the cost components has a focus on slope, because nearly all archaeological LCP studies take this cost component into account and because several methodological issues are connected with slope-based cost models. Other possible cost components are: the load of the walker, vegetation cover, wetlands or other soil properties, travelling and transport on water, water as barrier and as attractor, aspect, altitude, and social or cultural cost components. Eventually, advantages and disadvantages of different ways of combining cost components are presented. Based on the methodological issues I conclude that both validation checks and variations of the model are necessary to analyse the reliability of archaeological LCP results.

Regulation of major cultural components for designing a cost ...

African Journals Online (AJOL)

acer

2015-04-22

Apr 22, 2015 ... protein) synthesis by Bacillus thuringiensis (Bt) kurstaki HD-73 and indigenous Bt JSc1 harboring potential ... The cost of raw materials is one of the principal costs involved .... t- test analysis, the final formulation of the medium was 10% ..... ratio interacts with initial concentration of total solids on insecticidal.

Measuring the Cost of Obsolescence

International Nuclear Information System (INIS)

White, Mark

2006-01-01

The Advanced Test Reactor (ATR) at the Idaho National Laboratory (INL) has provided the capability for irradiation testing of nuclear fuels and materials since 1967, and is expected to operate for several more years. Within the scope of extending the life of a nuclear plant is dealing with aging and obsolescence issues. A component can be considered obsolete if the manufacturer no longer supports the component, or if the manufacturer does not even exist anymore. Though these components can be considered obsolete, the cost of obsolescence may or may not be significant; it may be more cost-effective to leave and/or repair the component rather than to replace it. The project at hand is to develop a tool that will not only identify these components, series of components, or entire systems that are obsolete, but to quantify the cost of obsolescence. This engineering tool will be based on empirical formulas created from data collected from factors that deal with obsolescence. These factors are primarily, the cost of item replacement, current cost of maintenance, cost of maintenance of the replacement, cost of failure, risk of failure, safety, increase in performance/efficiency, length of manufacturer's support, and so forth. The objective is to be able to look at the outcome of this engineering tool and clearly see what needs to be replaced, be it a component, series of components, or an entire system. If there are several such replacements needed, which one(s) have the greatest priority for replacement. Therefore the engineering tool will identify, quantify, and prioritize the cost of obsolescence in the plant. An engineering tool of this type should find application in a number of nuclear and non-nuclear facilities. While the engineering tool is being developed, the first stage of development will be on system components. Once the foundation is set it will be used to evaluate other systems and eventually expand and develop the engineering tool for the entire plant

Allocation base of general production costs as optimization of prime costs

Directory of Open Access Journals (Sweden)

Levytska I.O.

2017-03-01

Full Text Available Qualified management aimed at optimizing financial results is the key factor in today's society. Effective management decisions depend on the necessary information about the costs of production process in all its aspects – their structure, types, accounting policies of reflecting costs. General production costs, the so-called indirect costs that are not directly related to the production process, but provide its functioning in terms of supporting structural divisions and create the necessary conditions of production, play a significant role in calculating prime costs of goods (works, services. However, the accurate estimate of prime costs of goods (works, services should be determined with the value of indirect costs (in other words, general production costs, and properly determined with the base of their allocation. The choice of allocation base of general production costs is the significant moment, depending on the nature of business, which must guarantee fair distribution regarding to the largest share of direct expenses in the total structure of production costs. The study finds the essence of general production costs based on the analysis of key definitions of leading Ukrainian economists. The optimal allocation approach of general production costs is to calculate these costs as direct production costs within each subsidiary division (department separately without selecting a base as the main one to the their total amount.

Influence of Components of Net Working Capital on Costs of Companies Manufacturing Machinery and Equipment in the Czech Republic

Directory of Open Access Journals (Sweden)

Zdeněk Motlíček

2015-01-01

Full Text Available The approach to working capital management significantly affects the performance of companies. Nevertheless, this effect varies depending on the observed industry and company’s size and it may be assumed that it is also dependent on territory differences. The paper presents an empirical research aiming to identify particular links between net working capital and costs of the company. The outcomes indicate a relatively strong positive correlation between the variables, especially in case of inventory. Furthermore he ratio of financial costs to ordinary costs is low, as well as the impact of net working capital components on financial costs. It follows that a focus on collection period would not lead to significant savings. The findings appropriately complement Czech and foreign literature focused more on impact of net working capital or working capital on profitability indicators. Further studies concerning a more detailed analysis of the influence of net working capital on corporate costs are difficult to be found. The present research has been conducted on medium-sized companies located in the Czech Republic and manufacturing machinery and equipment. The obtained results suggest the most suitable area of focus for optimization of working capital in relation to costs for the types of companies defined above.

The aerosol optical properties and PM2.5 components over the world's largest industrial zone in Tangshan, North China

Science.gov (United States)

Zhang, Kequan; Ma, Yongjing; Xin, Jinyuan; Liu, Zirui; Ma, Yining; Gao, Dongdong; Wu, Junsong; Zhang, Wenyu; Wang, Yuesi; Shen, Pengke

2018-03-01

To achieve an in-depth understanding of the aerosol optical properties in the highly-industrial region of Tangshan, we provided systematic aerosol optical properties analysis in this largest industrial zone for the first time. The aerosol optical datasets (2013.05-2015.04) and chemical component data of PM2.5 (2014-2015) obtained from the Tangshan site of the campaign on atmospheric aerosol research (CARE-China) network were analyzed. The results showed that the Tangshan region was seriously affected by fine-mode industrial aerosols all year, which would promote the accumulation of pollutants and influence the atmospheric circulation through changing the vertical temperature gradient. The annual average aerosol optical depth (AOD) and Ångstrӧm exponent (α) were 0.80 ± 0.26 and 1.05 ± 0.10, respectively. The aerosol optical properties revealed significant seasonal characteristics. The maximum seasonal average AOD (1.03 ± 0.62) and α (1.12 ± 0.19) accompanied the highest seasonal secondary inorganic aerosol concentrations (SIA: SO42 -, NO3-, NH4+), 53.33 μg/m3, occurred in summer, and this phenomenon was attributed to the photochemical reactions favored by the high temperature and humidity. During the spring, frequent dust events led to the maximum Ca2 + concentration of 6.57 μg/m3 and the lowest seasonal α of 0.98 ± 0.31. Coal was used for generating heat in winter, resulting in the highest levels of pollutant emissions (Cl-, Elemental carbon (EC) and organic carbon (OC)). The aerosol type classifications showed that the industrial aerosols were the main controls in the summer and fall, representing 56%-58% of the total aerosols. While for spring and winter, mixed aerosols represented 53%-54% of the total aerosols. Hygroscopic growth effect of aerosols existed all year, which could enhance the negative radiative forcing and eventually cool the earth-atmosphere system. The classification Wing for Tangshan data showed high AOD values (> 0.70) were mainly

What Does It Cost to Prevent On-Duty Firefighter Cardiac Events? A Content Valid Method for Calculating Costs

Directory of Open Access Journals (Sweden)

P. Daniel Patterson

2013-01-01

Full Text Available Cardiac arrest is a leading cause of mortality among firefighters. We sought to develop a valid method for determining the costs of a workplace prevention program for firefighters. In 2012, we developed a draft framework using human resource accounting and in-depth interviews with experts in the firefighting and insurance industries. The interviews produced a draft cost model with 6 components and 26 subcomponents. In 2013, we randomly sampled 100 fire chiefs out of >7,400 affiliated with the International Association of Fire Chiefs. We used the Content Validity Index (CVI to identify the content valid components of the draft cost model. This was accomplished by having fire chiefs rate the relevancy of cost components using a 4-point Likert scale (highly relevant to not relevant. We received complete survey data from 65 fire chiefs (65% response rate. We retained 5 components and 21 subcomponents based on CVI scores ≥0.70. The five main components include, (1 investment costs, (2 orientation and training costs, (3 medical and pharmaceutical costs, (4 education and continuing education costs, and (5 maintenance costs. Data from a diverse sample of fire chiefs has produced a content valid method for calculating the cost of a prevention program among firefighters.

Noise Costs from Road Transport

Science.gov (United States)

Margorínová, Martina; Trojanová, Mária; Decký, Martin; Remišová, Eva

2018-06-01

Building and improving road infrastructure in Slovakia is currently influenced by the amount of state funding. Therefore, it is necessary to determine the effectiveness of each proposed solution of road project, which is based on life-cycle costs. Besides capital costs, social costs are also important, which valued the negative impacts due to road construction and operation on road users, the environment, and the population living in the affected area. Some components of social costs have shortcomings in quantifying and valuating, which need to be resolved. The one of important components which affects human health and the value of an area, and have some shortcomings are noise costs. Improvement of this component will lead to more accurate valuation of economic efficiency of roads.

broken magnet highlights largest collider's engineering challenges

CERN Multimedia

Inman, Mason

2007-01-01

"Even at the world's soon-to-be largest particle accelerator - a device that promises to push the boundaries of physics - scientists need to be mindful of one of the most fundamental laws in the universe: Murphy's Law. (2 pages)

Cost-effective reduction of fine primary particulate matter emissions in Finland

International Nuclear Information System (INIS)

Karvosenoja, Niko; Klimont, Zbigniew; Tohka, Antti; Johansson, Matti

2007-01-01

Policies to reduce adverse health impacts of fine particulate matter (PM 2.5 ) require information on costs of abatement and associated costs. This paper explores the potential for cost-efficient control of anthropogenic primary PM 2.5 emissions in Finland. Based on a Kyoto-compliant energy projection, two emission control scenarios for 2020 were developed. 'Baseline' assumes implementation of PM controls in compliance with existing legislation. 'Reduction' assumes ambitious further reductions. Emissions for 2020 were estimated at 26 and 18.6 Gg a -1 for 'Baseline' and 'Reduction', respectively. The largest abatement potential, 3.0 Gg a -1 , was calculated for power plants and industrial combustion. The largest potential with marginal costs below 5000 Euro MG(PM 2.5 ) -1 was for domestic wood combustion, 1.7 Gg a -1 . For traffic the potential was estimated at 1.0 Gg a -1 , but was associated with high costs. The results from this paper are used in the policy-driven national integrated assessment modeling that explores cost-efficient reductions of the health impacts of PM

Product costing guide for wood dimension and component manufacturers

Science.gov (United States)

Adrienn Andersch; Urs Buehlmann; Jeff Palmer; Janice K. Wiedenbeck; Steve. Lawser

2014-01-01

The North American hardwood dimension and components industry plays a critical role in the hardwood forest products industry as the industry is a user of high-value hardwood lumber. Customer expectations, global markets, and international competition, however, require hardwood dimension and components manufacturers to continuously improve their ability to manage their...

Multi-level predictive maintenance for multi-component systems

International Nuclear Information System (INIS)

Nguyen, Kim-Anh; Do, Phuc; Grall, Antoine

2015-01-01

In this paper, a novel predictive maintenance policy with multi-level decision-making is proposed for multi-component system with complex structure. The main idea is to propose a decision-making process considered on two levels: system level and component one. The goal of the decision rules at the system level is to address if preventive maintenance actions are needed regarding the predictive reliability of the system. At component level the decision rules aim at identifying optimally a group of several components to be preventively maintained when preventive maintenance is trigged due to the system level decision. Selecting optimal components is based on a cost-based group improvement factor taking into account the predictive reliability of the components, the economic dependencies as well as the location of the components in the system. Moreover, a cost model is developed to find the optimal maintenance decision variables. A 14-component system is finally introduced to illustrate the use and the performance of the proposed predictive maintenance policy. Different sensitivity analysis are also investigated and discussed. Indeed, the proposed policy provides more flexibility in maintenance decision-making for complex structure systems, hence leading to significant profits in terms of maintenance cost when compared with existing policies. - Highlights: • A predictive maintenance policy for complex structure systems is proposed. • Multi-level decision process based on prognostic results is proposed. • A cost-based group importance measure is introduced for decision-making. • Both positive and negative dependencies between components are investigated. • A cost model and Monte Carlo simulation are developed for optimization process.

Are renewables portfolio standards cost-effective emission abatement policy?

Science.gov (United States)

Dobesova, Katerina; Apt, Jay; Lave, Lester B

2005-11-15

Renewables portfolio standards (RPS) could be an important policy instrument for 3P and 4P control. We examine the costs of renewable power, accounting for the federal production tax credit, the market value of a renewable credit, and the value of producing electricity without emissions of SO2, NOx, mercury, and CO2. We focus on Texas, which has a large RPS and is the largest U.S. electricity producer and one of the largest emitters of pollutants and CO2. We estimate the private and social costs of wind generation in an RPS compared with the current cost of fossil generation, accounting for the pollution and CO2 emissions. We find that society paid about 5.7 cent/kWh more for wind power, counting the additional generation, transmission, intermittency, and other costs. The higher cost includes credits amounting to 1.1 cent/kWh in reduced SO2, NOx, and Hg emissions. These pollution reductions and lower CO2 emissions could be attained at about the same cost using pulverized coal (PC) or natural gas combined cycle (NGCC) plants with carbon capture and sequestration (CCS); the reductions could be obtained more cheaply with an integrated coal gasification combined cycle (IGCC) plant with CCS.

Activity-based costing evaluation of a [(18)F]-fludeoxyglucose positron emission tomography study.

Science.gov (United States)

Krug, Bruno; Van Zanten, Annie; Pirson, Anne-Sophie; Crott, Ralph; Borght, Thierry Vander

2009-10-01

The aim of the study is to use the activity-based costing approach to give a better insight in the actual cost structure of a positron emission tomography procedure (FDG-PET) by defining the constituting components and by simulating the impact of possible resource or practice changes. The cost data were obtained from the hospital administration, personnel and vendor interviews as well as from structured questionnaires. A process map separates the process in 16 patient- and non-patient-related activities, to which the detailed cost data are related. One-way sensitivity analyses shows to which degree of uncertainty the different parameters affect the individual cost and evaluate the impact of possible resource or practice changes like the acquisition of a hybrid PET/CT device, the patient throughput or the sales price of a 370MBq (18)F-FDG patient dose. The PET centre spends 73% of time in clinical activities and the resting time after injection of the tracer (42%) is the single largest departmental cost element. The tracer cost and the operational time have the most influence on cost per procedure. The analysis shows a total cost per FDG-PET ranging from 859 Euro for a BGO PET camera to 1142 Euro for a 16 slices PET-CT system, with a distribution of the resource costs in decreasing order: materials (44%), equipment (24%), wage (16%), space (6%) and hospital overhead (10%). The cost of FDG-PET is mainly influenced by the cost of the radiopharmaceutical. Therefore, the latter rather than the operational time should be reduced in order to improve its cost-effectiveness.

Cost estimation in software engineering projects with web components development

Directory of Open Access Journals (Sweden)

Javier de Andrés

2015-01-01

Full Text Available Existen multitud de modelos propuestos para la predicción de co stes en proyectos de software, al gunos orientados específicamen te para proyectos Web. Este trabajo analiza si los modelos específicos para proyectos Web están justifi cados, examinando el comportami ento diferencial de los costes entre proyectos de desarrollo softwar e Web y no Web. Se analizan dos aspectos del cálculo de costes: las deseconomías de escala, y el im pacto de algunas características de estos proyectos que son utilizadas como cost drivers. Se en uncian dos hipótesis: (a en estos proyect os las deseconomías de escala so n mayores y (b el incremento de coste que provocan los cost dr ivers es menor para los proyectos Web. Se contrastaron estas hipótesis a nalizando un conjunto de proyectos reales. Los resultados sugie ren que ambas hipótesis se cumplen. Por lo tanto, la principal contribu ción a la literatura de esta inv estigación es que el desarrollo de modelos específicos para los proyectos Web está justificado.

Cost of individual peer counselling for the promotion of exclusive breastfeeding in Uganda

Directory of Open Access Journals (Sweden)

Nankunda Jolly

2011-06-01

Full Text Available Abstract Background Exclusive breastfeeding (EBF for 6 months is the recommended form of infant feeding. Support of mothers through individual peer counselling has been proved to be effective in increasing exclusive breastfeeding prevalence. We present a costing study of an individual peer support intervention in Uganda, whose objective was to raise exclusive breastfeeding rates at 3 months of age. Methods We costed the peer support intervention, which was offered to 406 breastfeeding mothers in Uganda. The average number of counselling visits was about 6 per woman. Annual financial and economic costs were collected in 2005-2008. Estimates were made of total project costs, average costs per mother counselled and average costs per peer counselling visit. Alternative intervention packages were explored in the sensitivity analysis. We also estimated the resources required to fund the scale up to district level, of a breastfeeding intervention programme within a public health sector model. Results Annual project costs were estimated to be US$56,308. The largest cost component was peer supporter supervision, which accounted for over 50% of total project costs. The cost per mother counselled was US$139 and the cost per visit was US$26. The cost per week of EBF was estimated to be US$15 at 12 weeks post partum. We estimated that implementing an alternative package modelled on routine public health sector programmes can potentially reduce costs by over 60%. Based on the calculated average costs and annual births, scaling up modelled costs to district level would cost the public sector an additional US$1,813,000. Conclusion Exclusive breastfeeding promotion in sub-Saharan Africa is feasible and can be implemented at a sustainable cost. The results of this study can be incorporated in cost effectiveness analyses of exclusive breastfeeding promotion programmes in sub-Saharan Africa.

Estimated cost of overactive bladder in Thailand.

Science.gov (United States)

Prasopsanti, Kriangsak; Santi-Ngamkun, Apirak; Pornprasit, Kanokwan

2007-11-01

To estimate the annual direct and indirect costs of overactive bladder (OAB) in indigenous Thai people aged 18 years and over in the year 2005. Economically based models using diagnostic and treatment algorithms from clinical practice guidelines and current disease prevalence data were used to estimate direct and indirect costs of OAB. Prevalence and event probability estimates were obtained from the literature, national data sets, and expert opinion. Costs were estimated from a small survey using a cost questionnaire and from unit costs of King Chulalongkorn Memorial Hospital. The annual cost of OAB in Thailand is estimated as 1.9 billion USD. It is estimated to consume 1.14% of national GDP The cost includes 0.33 billion USD for direct medical costs, 1.3 billion USD for direct, nonmedical costs and 0.29 billion USD for indirect costs of lost productivity. The largest costs category was direct treatment costs of comorbidities associated with OAB. Costs of OAB medication accountedfor 14% of the total costs ofOAB.

Validation of the OpCost logging cost model using contractor surveys

Science.gov (United States)

Conor K. Bell; Robert F. Keefe; Jeremy S. Fried

2017-01-01

OpCost is a harvest and fuel treatment operations cost model developed to function as both a standalone tool and an integrated component of the Bioregional Inventory Originated Simulation Under Management (BioSum) analytical framework for landscape-level analysis of forest management alternatives. OpCost is an updated implementation of the Fuel Reduction Cost Simulator...

Microwave components for cellular portable radiotelephone

Science.gov (United States)

Muraguchi, Masahiro; Aikawa, Masayoshi

1995-09-01

Mobile and personal communication systems are expected to represent a huge market for microwave components in the coming years. A number of components in silicon bipolar, silicon Bi-CMOS, GaAs MESFET, HBT and HEMT are now becoming available for system application. There are tradeoffs among the competing technologies with regard to performance, cost, reliability and time-to-market. This paper describes process selection and requirements of cost and r.f. performances to microwave semiconductor components for digital cellular and cordless telephones. Furthermore, new circuit techniques which were developed by NTT are presented.

The lifetime cost of a magnetic refrigerator

DEFF Research Database (Denmark)

Bjørk, Rasmus; Bahl, Christian R.H.; Nielsen, Kaspar Kirstein

2016-01-01

The total cost of a 25 W average load magnetic refrigerator using commercial grade Gd is calculated using a numerical model. The price of magnetocaloric material, magnet material and cost of operation are considered, and all influence the total cost. The lowest combined total cost with a device...... lifetime of 15 years is found to be in the range $150-$400 depending on the price of the magnetocaloric and magnet material. The cost of the magnet is largest, followed closely by the cost of operation, while the cost of the magnetocaloric material is almost negligible. For the lowest cost device...... characteristics are based on the performance of a conventional A+++ refrigeration unit. In a rough life time cost comparison between the AMR device and such a unit we find similar costs, the AMR being slightly cheaper, assuming the cost of the magnet can be recuperated at end of life....

Constrained principal component analysis and related techniques

CERN Document Server

Takane, Yoshio

2013-01-01

In multivariate data analysis, regression techniques predict one set of variables from another while principal component analysis (PCA) finds a subspace of minimal dimensionality that captures the largest variability in the data. How can regression analysis and PCA be combined in a beneficial way? Why and when is it a good idea to combine them? What kind of benefits are we getting from them? Addressing these questions, Constrained Principal Component Analysis and Related Techniques shows how constrained PCA (CPCA) offers a unified framework for these approaches.The book begins with four concre

Joint Asymptotic Distributions of Smallest and Largest Insurance Claims

Directory of Open Access Journals (Sweden)

Hansjörg Albrecher

2014-07-01

Full Text Available Assume that claims in a portfolio of insurance contracts are described by independent and identically distributed random variables with regularly varying tails and occur according to a near mixed Poisson process. We provide a collection of results pertaining to the joint asymptotic Laplace transforms of the normalised sums of the smallest and largest claims, when the length of the considered time interval tends to infinity. The results crucially depend on the value of the tail index of the claim distribution, as well as on the number of largest claims under consideration.

The costs of traumatic brain injury due to motorcycle accidents in Hanoi, Vietnam

Directory of Open Access Journals (Sweden)

Vo Thuy TN

2008-08-01

Full Text Available Abstract Background Road traffic accidents are the leading cause of fatal and non-fatal injuries in Vietnam. The purpose of this study is to estimate the costs, in the first year post-injury, of non-fatal traumatic brain injury (TBI in motorcycle users not wearing helmets in Hanoi, Vietnam. The costs are calculated from the perspective of the injured patients and their families, and include quantification of direct, indirect and intangible costs, using years lost due to disability as a proxy. Methods The study was a retrospective cross-sectional study. Data on treatment and rehabilitation costs, employment and support were obtained from patients and their families using a structured questionnaire and The European Quality of Life instrument (EQ6D. Results Thirty-five patients and their families were interviewed. On average, patients with severe, moderate and minor TBI incurred direct costs at USD 2,365, USD 1,390 and USD 849, with time lost for normal activities averaging 54 weeks, 26 weeks and 17 weeks and years lived with disability (YLD of 0.46, 0.25 and 0.15 year, respectively. Conclusion All three component costs of TBI were high; the direct cost accounted for the largest proportion, with costs rising with the severity of TBI. The results suggest that the burden of TBI can be catastrophic for families because of high direct costs, significant time off work for patients and caregivers, and impact on health-related quality of life. Further research is warranted to explore the actual social and economic benefits of mandatory helmet use.

Modelling the costs of care of hypertension in patients with metabolic syndrome and its consequences, in Germany, Spain and Italy.

Science.gov (United States)

Wille, Eberhard; Scholze, Jürgen; Alegria, Eduardo; Ferri, Claudio; Langham, Sue; Stevens, Warren; Jeffries, David; Uhl-Hochgraeber, Kerstin

2011-06-01

The presence of metabolic syndrome in patients with hypertension significantly increases the risk of cardiovascular disease, type 2 diabetes and mortality. Our aim is to estimate the economic burden to the health service of metabolic syndrome (MetS) in patients with hypertension and its consequences, in three European countries in 2008, and to forecast future economic burden in 2020 using projected demographic estimates and assumptions around the growth of MetS. An age-, sex- and risk group-structured prevalence-based cost of illness model was developed using the United States Adult Treatment Panel III of the National Cholesterol Education Program criteria to define MetS. Data sources included published information and public use databases on disease prevalence, incidence of cardiovascular events, prevalence of type 2 diabetes, treatment patterns and cost of management in Germany, Spain and Italy. The economic burden to the health service of MetS in patients with hypertension has been estimated at 24,427 euro, 1,900 euro and 4,877 euro million in Germany, Spain and Italy, and is forecast to rise by 59, 179 and 157%, respectively, by 2020. The largest components of costs included the management of prevalent type 2 diabetes and incident cardiovascular events. Mean annual costs per hypertensive patient were around three-fold higher in subjects with MetS compared to those without and rose incrementally with the additional number of MetS components present. In conclusion, the presence of MetS in patients with hypertension significantly inflates economic burden, and costs are likely to increase in the future due to an aging population and an increase in the prevalence of components of MetS.

Oil and gas pipeline construction cost analysis and developing regression models for cost estimation

Science.gov (United States)

Thaduri, Ravi Kiran

In this study, cost data for 180 pipelines and 136 compressor stations have been analyzed. On the basis of the distribution analysis, regression models have been developed. Material, Labor, ROW and miscellaneous costs make up the total cost of a pipeline construction. The pipelines are analyzed based on different pipeline lengths, diameter, location, pipeline volume and year of completion. In a pipeline construction, labor costs dominate the total costs with a share of about 40%. Multiple non-linear regression models are developed to estimate the component costs of pipelines for various cross-sectional areas, lengths and locations. The Compressor stations are analyzed based on the capacity, year of completion and location. Unlike the pipeline costs, material costs dominate the total costs in the construction of compressor station, with an average share of about 50.6%. Land costs have very little influence on the total costs. Similar regression models are developed to estimate the component costs of compressor station for various capacities and locations.

Fusion reactor design studies: standard unit costs and cost scaling rules

International Nuclear Information System (INIS)

Schulte, S.C.; Bickford, W.E.; Willingham, C.E.; Ghose, S.K.; Walker, M.G.

1979-09-01

This report establishes standard unit costs and scaling rules for estimating costs of material, equipment, land, and labor components used in magnetic confinement fusion reactor plant construction and operation. Use of the standard unit costs and scaling rules will add uniformity to cost estimates, and thus allow valid comparison of the economic characteristics of various reactor concepts

CECP, Decommissioning Costs for PWR and BWR

International Nuclear Information System (INIS)

Bierschbach, M.C.

1997-01-01

1 - Description of program or function: The Cost Estimating Computer Program CECP, designed for use on an IBM personal computer or equivalent, was developed for estimating the cost of decommissioning boiling water reactor (BWR) and light-water reactor (PWR) power stations to the point of license termination. 2 - Method of solution: Cost estimates include component, piping, and equipment removal costs; packaging costs; decontamination costs; transportation costs; burial volume and costs; and manpower staffing costs. Using equipment and consumables costs and inventory data supplied by the user, CECP calculates unit cost factors and then combines these factors with transportation and burial cost algorithms to produce a complete report of decommissioning costs. In addition to costs, CECP also calculates person-hours, crew-hours, and exposure person-hours associated with decommissioning. 3 - Restrictions on the complexity of the problem: The program is designed for a specific waste charge structure. The waste cost data structure cannot handle intermediate waste handlers or changes in the charge rate structures. The decommissioning of a reactor can be divided into 5 periods. 200 different items for special equipment costs are possible. The maximum amount for each special equipment item is 99,999,999$. You can support data for 10 buildings, 100 components each; ESTS1071/01: There are 65 components for 28 systems available to specify the contaminated systems costs (BWR). ESTS1071/02: There are 75 components for 25 systems available to specify the contaminated systems costs (PWR)

Preventing Obesity in the USA: Impact on Health Service Utilization and Costs.

Science.gov (United States)

Cecchini, Michele; Sassi, Franco

2015-07-01

With more than two-thirds of the US population overweight or obese, the obesity epidemic is a major threat for population health and the financial sustainability of the healthcare service. Whether, and to what extent, effective prevention interventions may offer the opportunity to 'bend the curve' of rising healthcare costs is still an object of debate. This study evaluates the potential economic impact of a set of prevention programmes, including education, counselling, long-term drug treatment, regulation (e.g. of advertising or labelling) and fiscal measures, on national healthcare expenditure and use of healthcare services in the USA. The study was carried out as a retrospective evaluation of alternative scenarios compared with a 'business as usual' scenario. An advanced econometric approach involving the use of logistic regression and generalized linear models was used to calculate the number of contacts with key healthcare services (inpatient, outpatient, drug prescriptions) and the associated cost. Analyses were carried out on the Medical Expenditure Panel Survey (1997-2010). In 2010, prevention interventions had the potential to decrease total healthcare expenditure by up to $US2 billion. This estimate does not include the implementation costs. The largest share of savings is produced by reduced use and costs of inpatient care, followed by reduced use of drugs. Reduction in expenditure for outpatient care would be more limited. Private insurance schemes benefit from the largest savings in absolute terms; however, public insurance schemes benefit from the largest cost reduction per patient. People in the lowest income groups show the largest economic benefits. Prevention interventions aimed at tackling obesity and associated risk factors may produce a significant decrease in the use of healthcare services and expenditure. Savings become substantial when a long-term perspective is taken.

What Are the Real Procedural Costs of Bariatric Surgery? A Systematic Literature Review of Published Cost Analyses.

Science.gov (United States)

Doble, Brett; Wordsworth, Sarah; Rogers, Chris A; Welbourn, Richard; Byrne, James; Blazeby, Jane M

2017-08-01

This review aims to evaluate the current literature on the procedural costs of bariatric surgery for the treatment of severe obesity. Using a published framework for the conduct of micro-costing studies for surgical interventions, existing cost estimates from the literature are assessed for their accuracy, reliability and comprehensiveness based on their consideration of seven 'important' cost components. MEDLINE, PubMed, key journals and reference lists of included studies were searched up to January 2017. Eligible studies had to report per-case, total procedural costs for any type of bariatric surgery broken down into two or more individual cost components. A total of 998 citations were screened, of which 13 studies were included for analysis. Included studies were mainly conducted from a US hospital perspective, assessed either gastric bypass or adjustable gastric banding procedures and considered a range of different cost components. The mean total procedural costs for all included studies was US$14,389 (range, US$7423 to US$33,541). No study considered all of the recommended 'important' cost components and estimation methods were poorly reported. The accuracy, reliability and comprehensiveness of the existing cost estimates are, therefore, questionable. There is a need for a comparative cost analysis of the different approaches to bariatric surgery, with the most appropriate costing approach identified to be micro-costing methods. Such an analysis will not only be useful in estimating the relative cost-effectiveness of different surgeries but will also ensure appropriate reimbursement and budgeting by healthcare payers to ensure barriers to access this effective treatment by severely obese patients are minimised.

Costs of fire suppression forces based on cost-aggregation approach

Science.gov (United States)

Gonz& aacute; lez-Cab& aacute; Armando n; Charles W. McKetta; Thomas J. Mills

1984-01-01

A cost-aggregation approach has been developed for determining the cost of Fire Management Inputs (FMls)-the direct fireline production units (personnel and equipment) used in initial attack and large-fire suppression activities. All components contributing to an FMI are identified, computed, and summed to estimate hourly costs. This approach can be applied to any FMI...

Principal components analysis in clinical studies.

Science.gov (United States)

Zhang, Zhongheng; Castelló, Adela

2017-09-01

In multivariate analysis, independent variables are usually correlated to each other which can introduce multicollinearity in the regression models. One approach to solve this problem is to apply principal components analysis (PCA) over these variables. This method uses orthogonal transformation to represent sets of potentially correlated variables with principal components (PC) that are linearly uncorrelated. PCs are ordered so that the first PC has the largest possible variance and only some components are selected to represent the correlated variables. As a result, the dimension of the variable space is reduced. This tutorial illustrates how to perform PCA in R environment, the example is a simulated dataset in which two PCs are responsible for the majority of the variance in the data. Furthermore, the visualization of PCA is highlighted.

Guaranteeing uptime at worl's largest particle physics lab

CERN Multimedia

Brodkin, Jon

2007-01-01

"As the European agency CERN was gearing up to build the world's largest particle accelerator, officials there knew they could not afford to have problems in their technical infrastructure cause any downtime." (1 page)

Fuel-cell-system and its components for mobile application

Energy Technology Data Exchange (ETDEWEB)

Venturi, Massimo [NuCellSys GmbH, Kirchheim/Teck-Nabern (Germany)

2013-06-01

In the past years the development of fuel cell systems for mobile applications has made significant progress in power density, performance and robustness. For a successful market introduction the cost of the fuel system powertrain needs to be competitive to diesel hybrid engine. The current development activities are therefore focusing on cost reduction. There are 3 major areas for cost reduction: functional integration, materials and design, supplier competitiveness and volume. Today unique fuel cell system components are developed by single suppliers, which lead to a monopoly. In the future the components will be developed at multiple suppliers to achieve a competitor situation, which will further reduce the component cost. Using all these cost reduction measures the fuel cell system will become a competitive alternative drive train. (orig.)

Underestimating Costs in Public Works Projects

DEFF Research Database (Denmark)

Flyvbjerg, Bent; Holm, Mette K. Skamris; Buhl, Søren L.

2002-01-01

This article presents results from the first statistically significant study of cost escalation in transportation infrastructure projects. Based on a sample of 258 transportation infrastructure projects worth $90 billion (U.S.), it is found with overwhelming statistical significance that the cost...... honest numbers should not trust the cost estimates and cost-benefit analyses produced by project promoters and their analysts. Independent estimates and analyses are needed as are institutional checks and balances to curb deception.......This article presents results from the first statistically significant study of cost escalation in transportation infrastructure projects. Based on a sample of 258 transportation infrastructure projects worth $90 billion (U.S.), it is found with overwhelming statistical significance that the cost...... estimates used to decide whether important infrastructure should be built are highly and systematically misleading. The result is continuous cost escalation of billions of dollars. The sample used in the study is the largest of its kind, allowing for the first time statistically valid conclusions regarding...

Cost Underestimation in Public Works Projects

DEFF Research Database (Denmark)

Flyvbjerg, Bent; Holm, Mette K. Skamris; Buhl, Søren L.

This article presents results from the first statistically significant study of cost escalation in transportation infrastructure projects. Based on a sample of 258 transportation infrastructure projects worth $90 billion (U.S.), it is found with overwhelming statistical significance that the cost...... honest numbers should not trust the cost estimates and cost-benefit analyses produced by project promoters and their analysts. Independent estimates and analyses are needed as are institutional checks and balances to curb deception.......This article presents results from the first statistically significant study of cost escalation in transportation infrastructure projects. Based on a sample of 258 transportation infrastructure projects worth $90 billion (U.S.), it is found with overwhelming statistical significance that the cost...... estimates used to decide whether important infrastructure should be built are highly and systematically misleading. The result is continuous cost escalation of billions of dollars. The sample used in the study is the largest of its kind, allowing for the first time statistically valid conclusions regarding...

The world's largest LNG producer's next market

International Nuclear Information System (INIS)

Fuller, R.; Isworo Suharno; Simandjuntak, W.M.P.

1996-01-01

The development of the domestic gas market in Indonesia, the world's largest liquefied natural gas producing country, is described as part of the overall impact of the country's oil and gas production. The first large scale use of natural gas in Indonesia was established in 1968 when a fertiliser plant using gas as the feedstock was built. Ultimately, through increased yields, this has enabled Indonesia to be self-sufficient in rice and an exporter of fertiliser. Problems which stand in the way of further developments include: capital, though Pertamina and PGN are perceived as attractive for foreign investment; the lack of a regulatory framework for gas; geographical constraints, among them the fact that the gas deposits are remote from the largest population concentrations; lack of infrastructure. There are nevertheless plans for expansion and the provision of an integrated gas pipeline system. Pertamina, which has responsibility for all oil and gas developments, and PGN, whose primary role has been as a manufacturer and distributor of gas, are now working together in the coordination of all gas activities. (10 figures). (UK)

Herd-Level Mastitis-Associated Costs on Canadian Dairy Farms

Science.gov (United States)

Aghamohammadi, Mahjoob; Haine, Denis; Kelton, David F.; Barkema, Herman W.; Hogeveen, Henk; Keefe, Gregory P.; Dufour, Simon

2018-01-01

Mastitis imposes considerable and recurring economic losses on the dairy industry worldwide. The main objective of this study was to estimate herd-level costs incurred by expenditures and production losses associated with mastitis on Canadian dairy farms in 2015, based on producer reports. Previously, published mastitis economic frameworks were used to develop an economic model with the most important cost components. Components investigated were divided between clinical mastitis (CM), subclinical mastitis (SCM), and other costs components (i.e., preventive measures and product quality). A questionnaire was mailed to 374 dairy producers randomly selected from the (Canadian National Dairy Study 2015) to collect data on these costs components, and 145 dairy producers returned a completed questionnaire. For each herd, costs due to the different mastitis-related components were computed by applying the values reported by the dairy producer to the developed economic model. Then, for each herd, a proportion of the costs attributable to a specific component was computed by dividing absolute costs for this component by total herd mastitis-related costs. Median self-reported CM incidence was 19 cases/100 cow-year and mean self-reported bulk milk somatic cell count was 184,000 cells/mL. Most producers reported using post-milking teat disinfection (97%) and dry cow therapy (93%), and a substantial proportion of producers reported using pre-milking teat disinfection (79%) and wearing gloves during milking (77%). Mastitis costs were substantial (662 CAD per milking cow per year for a typical Canadian dairy farm), with a large portion of the costs (48%) being attributed to SCM, and 34 and 15% due to CM and implementation of preventive measures, respectively. For SCM, the two most important cost components were the subsequent milk yield reduction and culling (72 and 25% of SCM costs, respectively). For CM, first, second, and third most important cost components were culling (48

Herd-Level Mastitis-Associated Costs on Canadian Dairy Farms

Directory of Open Access Journals (Sweden)

Mahjoob Aghamohammadi

2018-05-01

Full Text Available Mastitis imposes considerable and recurring economic losses on the dairy industry worldwide. The main objective of this study was to estimate herd-level costs incurred by expenditures and production losses associated with mastitis on Canadian dairy farms in 2015, based on producer reports. Previously, published mastitis economic frameworks were used to develop an economic model with the most important cost components. Components investigated were divided between clinical mastitis (CM, subclinical mastitis (SCM, and other costs components (i.e., preventive measures and product quality. A questionnaire was mailed to 374 dairy producers randomly selected from the (Canadian National Dairy Study 2015 to collect data on these costs components, and 145 dairy producers returned a completed questionnaire. For each herd, costs due to the different mastitis-related components were computed by applying the values reported by the dairy producer to the developed economic model. Then, for each herd, a proportion of the costs attributable to a specific component was computed by dividing absolute costs for this component by total herd mastitis-related costs. Median self-reported CM incidence was 19 cases/100 cow-year and mean self-reported bulk milk somatic cell count was 184,000 cells/mL. Most producers reported using post-milking teat disinfection (97% and dry cow therapy (93%, and a substantial proportion of producers reported using pre-milking teat disinfection (79% and wearing gloves during milking (77%. Mastitis costs were substantial (662 CAD per milking cow per year for a typical Canadian dairy farm, with a large portion of the costs (48% being attributed to SCM, and 34 and 15% due to CM and implementation of preventive measures, respectively. For SCM, the two most important cost components were the subsequent milk yield reduction and culling (72 and 25% of SCM costs, respectively. For CM, first, second, and third most important cost components were

Worlds Largest Wave Energy Project 2007 in Wales

DEFF Research Database (Denmark)

Christensen, Lars; Friis-Madsen, Erik; Kofoed, Jens Peter

2006-01-01

This paper introduces world largest wave energy project being developed in Wales and based on one of the leading wave energy technologies. The background for the development of wave energy, the total resource ands its distribution around the world is described. In contrast to wind energy turbines...... Dragon has to be scaled in accordance with the wave climate at the deployment site, which makes the Welch demonstrator device the worlds largest WEC so far with a total width of 300 meters. The project budget, the construction methods and the deployment site are also given....... a large number of fundamentally different technologies are utilised to harvest wave energy. The Wave Dragon belongs to the wave overtopping class of converters and the paper describes the fundamentals and the technical solutions used in this wave energy converter. An offshore floating WEC like the Wave...

Some regional costs of a synthetic fuel industry: The case of illinois

Science.gov (United States)

Attanasi, E.D.; Green, E.K.

1981-01-01

The Federal Government's efforts to induce development of a coal-based synthetic fuel industry include direct subsidies, tax concessions, and assurances that it will purchase the industry's output, even if above the market price. In this note it is argued that these subsidies will enable this industry to secure a region's largest and lowest-cost coal deposits and that the costs imposed on other coal users will be substantial. Moreover, because the lowest-cost coal deposits will be committed to synthetic fuels production regardless of the industry's commercial viability, distortions in regional coal markets will develop. If economic efficiency requires that the price of the resource reflect its replacement value, then a State government is justified in imposing a tax on coal destined for subsidized synthetic fuel plants. Amounts of such a tax, based on the higher costs of coal that must be accepted by other users as the result of the subsidized synthetic fuel plants' preempting the largest and lowest-cost deposits, are estimated for the case of Illinois strippable coal. ?? 1981 Annals of Regional Science.

First Experience from the World Largest fully commercial Solar Heating Plant

DEFF Research Database (Denmark)

Heller, Alfred; Furbo, Simon

1997-01-01

The first experience from the largest solar heating plant in the world is given. The plant is situated in Marstal and is has a total area of 8000 square m.......The first experience from the largest solar heating plant in the world is given. The plant is situated in Marstal and is has a total area of 8000 square m....

Understanding the reductions in US corn ethanol production costs: an experience curve approach

NARCIS (Netherlands)

Hettinga, W.; Junginger, H.M.; Dekker, S.C.; Hoogwijk, M.; McAloon, A.; Hicks, K.

2009-01-01

The US is currently the world's largest ethanol producer. An increasing percentage is used as transportation fuel, but debates continue on its costs competitiveness and energy balance. In this study, technological development of ethanol production and resulting cost reductions are investigated by

Optimized Cost per Click in Taobao Display Advertising

OpenAIRE

Zhu, Han; Jin, Junqi; Tan, Chang; Pan, Fei; Zeng, Yifan; Li, Han; Gai, Kun

2017-01-01

Taobao, as the largest online retail platform in the world, provides billions of online display advertising impressions for millions of advertisers every day. For commercial purposes, the advertisers bid for specific spots and target crowds to compete for business traffic. The platform chooses the most suitable ads to display in tens of milliseconds. Common pricing methods include cost per mille (CPM) and cost per click (CPC). Traditional advertising systems target certain traits of users and...

Effectiveness and Cost Efficiency of Different Surveillance Components for Proving Freedom and Early Detection of Disease: Bluetongue Serotype 8 in Cattle as Case Study for Belgium, France and the Netherlands.

Science.gov (United States)

Welby, S; van Schaik, G; Veldhuis, A; Brouwer-Middelesch, H; Peroz, C; Santman-Berends, I M; Fourichon, C; Wever, P; Van der Stede, Y

2017-12-01

Quick detection and recovery of country's freedom status remain a constant challenge in animal health surveillance. The efficacy and cost efficiency of different surveillance components in proving the absence of infection or (early) detection of bluetongue serotype 8 in cattle populations within different countries (the Netherlands, France, Belgium) using surveillance data from years 2006 and 2007 were investigated using an adapted scenario tree model approach. First, surveillance components (sentinel, yearly cross-sectional and passive clinical reporting) within each country were evaluated in terms of efficacy for substantiating freedom of infection. Yearly cross-sectional survey and passive clinical reporting performed well within each country with sensitivity of detection values ranging around 0.99. The sentinel component had a sensitivity of detection around 0.7. Secondly, how effective the components were for (early) detection of bluetongue serotype 8 and whether syndromic surveillance on reproductive performance, milk production and mortality data available from the Netherlands and Belgium could be of added value were evaluated. Epidemic curves were used to estimate the timeliness of detection. Sensitivity analysis revealed that expected within-herd prevalence and number of herds processed were the most influential parameters for proving freedom and early detection. Looking at the assumed direct costs, although total costs were low for sentinel and passive clinical surveillance components, passive clinical surveillance together with syndromic surveillance (based on reproductive performance data) turned out most cost-efficient for the detection of bluetongue serotype 8. To conclude, for emerging or re-emerging vectorborne disease that behaves such as bluetongue serotype 8, it is recommended to use passive clinical and syndromic surveillance as early detection systems for maximum cost efficiency and sensitivity. Once an infection is detected and eradicated

Challenges with the largest commercial hydrogen station in the world

Energy Technology Data Exchange (ETDEWEB)

Charbonneau, Thomas; Gauthier, Pierre [Air Liquide Canada (Canada)

2010-07-01

This abstract's objective is to share with the participants the story of the largest hydrogen fueling station made to this date and to kick-start the story, we will cover the challenges; first the technical ones; the operational ones; the distribution ones and; the financial ones. We will then move on to review the logistic (geographic) issues raised by the project and conclude our presentation by sharing the output values of the largest fueling station built so far in the world. (orig.)

Spoken Word Recognition and Serial Recall of Words from Components in the Phonological Network

Science.gov (United States)

Siew, Cynthia S. Q.; Vitevitch, Michael S.

2016-01-01

Network science uses mathematical techniques to study complex systems such as the phonological lexicon (Vitevitch, 2008). The phonological network consists of a "giant component" (the largest connected component of the network) and "lexical islands" (smaller groups of words that are connected to each other, but not to the giant…

Time and travel costs incurred by women attending antenatal tests: A costing study.

Science.gov (United States)

Verhoef, Talitha I; Daley, Rebecca; Vallejo-Torres, Laura; Chitty, Lyn S; Morris, Stephen

2016-09-01

to estimate the costs to women, their friends and family for different antenatal tests in the Down's syndrome (DS) screening pathway. questionnaire-based costing study. eight maternity clinics across the UK. pregnant women (n=574) attending an appointment for DS screening, NIPT or invasive testing between December 2013 and September 2014. using data collected from the questionnaires we calculated the total costs to women by multiplying the time spent at the hospital and travelling to and from it by the opportunity costs of the women and accompanying person and adding travel and childcare costs. Assumptions about the value of opportunity costs were tested in one-way sensitivity analyses. The main outcome measure was the mean cost to the women and friends/family for each test (DS screening, NIPT, and invasive testing). mean costs to women and their family/friend were £33.96 per visit, of which £22.47 were time costs, £9.15 were travel costs and £2.34 were childcare costs. Costs were lowest for NIPT (£22), £32 for DS screening (£44 if combined with NIPT), and highest for invasive testing (£60). Sensitivity analysis revealed that variations around the value of leisure time opportunity costs had the largest influence on the results. there are considerable costs to women, their friends and family when attending different tests in the DS screening pathway. when assessing the cost-effectiveness of changes to this pathway, costs to women should be considered. Copyright © 2016 Elsevier Ltd. All rights reserved.

High cost of nuclear power plants

International Nuclear Information System (INIS)

Bassett, C.

1978-01-01

Retroactive safety standards were found to account for over half the costs of a nuclear power plant and point up the need for an effective cost-benefit analysis of changes made by the Nuclear Regulatory Commission after construction has started. The author compared the Davis-Besse Unit No. 1 construction-cost estimates with the final-cost increases during a rate-case investigation in Ohio. He presents data furnished for ten of the largest construction contracts to illustrate the cost increases involving fixed hardware and intensive labor. The situation was found to repeat with other utilities across the country even though safeguards against irresponsible low bidding were introduced. Low bidding was found to continue, encouraged by the need for retrofitting to meet regulation changes. The average cost per kilowatt of major light-water reactors is shown to have increased from $171 in 1970 to $555 in 1977, while construction duration increased from 43.4 to 95.6 months during the same period

2013 Cost of Wind Energy Review

Energy Technology Data Exchange (ETDEWEB)

Mone, C. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Smith, A. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Maples, B. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Hand, M. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2015-02-01

This report uses representative project types to estimate the levelized cost of wind energy (LCOE) in the United States for 2013. Scheduled to be published on an annual basis, it relies on both market and modeled data to maintain a current understanding of wind generation cost trends and drivers. It is intended to provide insight into current component-level costs and a basis for understanding current component-level costs and a basis for understanding variability in the LCOE across the industry. Data and tools developed from this analysis are used to inform wind technology cost projections, goals, and improvement opportunities.

A managerial accounting analysis of hospital costs.

Science.gov (United States)

Frank, W G

1976-01-01

Variance analysis, an accounting technique, is applied to an eight-component model of hospital costs to determine the contribution each component makes to cost increases. The method is illustrated by application to data on total costs from 1950 to 1973 for all U.S. nongovernmental not-for-profit short-term general hospitals. The costs of a single hospital are analyzed and compared to the group costs. The potential uses and limitations of the method as a planning and research tool are discussed.

Valuing productivity costs in a changing macroeconomic environment: the estimation of colorectal cancer productivity costs using the friction cost approach.

Science.gov (United States)

Hanly, Paul; Koopmanschap, Marc; Sharp, Linda

2016-06-01

The friction cost approach (FCA) has been proposed as an alternative to the human capital approach for productivity cost valuation. However, FCA estimates are context dependent and influenced by extant macroeconomic conditions. We applied the FCA to estimate colorectal cancer labor productivity costs and assessed the impact of a changing macroeconomic environment on these estimates. Data from colorectal cancer survivors (n = 159) derived from a postal survey undertaken in Ireland March 2010 to January 2011 were combined with national wage data, population-level survival data, and occupation-specific friction periods to calculate temporary and permanent disability, and premature mortality costs using the FCA. The effects of changing labor market conditions between 2006 and 2013 on the friction period were modeled in scenario analyses. Costs were valued in 2008 euros. In the base-case, the total FCA per-person productivity cost for incident colorectal cancer patients of working age at diagnosis was €8543. In scenario 1 (a 2.2 % increase in unemployment), the fall in the friction period caused total productivity costs to decrease by up to 18 % compared to base-case estimates. In scenario 2 (a 9.2 % increase in unemployment), the largest decrease in productivity cost was up to 65 %. Adjusting for the vacancy rate reduced the effect of unemployment on the cost results. The friction period used in calculating labor productivity costs greatly affects the derived estimates; this friction period requires reassessment following changes in labor market conditions. The influence of changes in macroeconomic conditions on FCA-derived cost estimates may be substantial.

Innovative High-Performance Deposition Technology for Low-Cost Manufacturing of OLED Lighting

Energy Technology Data Exchange (ETDEWEB)

Scott, David; Hamer, John

2017-06-30

In this project, OLEDWorks developed and demonstrated the innovative high-performance deposition technology required to deliver dramatic reductions in the cost of manufacturing OLED lighting in production equipment. The current high manufacturing cost of OLED lighting is the most urgent barrier to its market acceptance. The new deposition technology delivers solutions to the two largest parts of the manufacturing cost problem – the expense per area of good product for organic materials and for the capital cost and depreciation of the equipment. Organic materials cost is the largest expense item in the bill of materials and is predicted to remain so through 2020. The high-performance deposition technology developed in this project, also known as the next generation source (NGS), increases material usage efficiency from 25% found in current Gen2 deposition technology to 60%. This improvement alone results in a reduction of approximately $25/m2 of good product in organic materials costs, independent of production volumes. Additionally, this innovative deposition technology reduces the total depreciation cost from the estimated value of approximately $780/m2 of good product for state-of-the-art G2 lines (at capacity, 5-year straight line depreciation) to $170/m2 of good product from the OLEDWorks production line.

Assessing the Social and Environmental Costs of Institution Nitrogen Footprints.

Science.gov (United States)

Compton, Jana E; Leach, Allison M; Castner, Elizabeth A; Galloway, James N

2017-04-01

This article estimates the damage costs associated with the institutional nitrogen (N) footprint and explores how this information could be used to create more sustainable institutions. Potential damages associated with the release of nitrogen oxides (NOx), ammonia (NH 3 ), and nitrous oxide (N 2 O) to air and release of nitrogen to water were estimated using existing values and a cost per unit of nitrogen approach. These damage cost values were then applied to two universities. Annual potential damage costs to human health, agriculture, and natural ecosystems associated with the N footprint of institutions were $11.0 million (2014) at the University of Virginia (UVA) and $3.04 million at the University of New Hampshire (UNH). Costs associated with the release of nitrogen oxides to human health, in particular the use of coal-derived energy, were the largest component of damage at UVA. At UNH the energy N footprint is much lower because of a landfill cogeneration source, and thus the majority of damages were associated with food production. Annual damages associated with release of nitrogen from food production were very similar at the two universities ($1.80 million vs. $1.66 million at UVA and UNH, respectively). These damages also have implications for the extent and scale at which the damages are felt. For example, impacts to human health from energy and transportation are generally larger near the power plants and roads, while impacts from food production can be distant from the campus. Making this information available to institutions and communities can improve their understanding of the damages associated with the different nitrogen forms and sources, and inform decisions about nitrogen reduction strategies.

Fusion reactor cost reductions by employing non-nuclear grade components

International Nuclear Information System (INIS)

Bourque, R.F.; Maya, I.; Schultz, K.R.; Sonn, D.L.; Wise, R.K.

1987-09-01

The Cascade inertial confinement fusion reactor fits the requirements of low radioactive inventories and inherent safety and is therefore a candidate for non-nuclear construction throughout. This reactor consists of a rotating blanket of ceramic granules that absorb the energy from D-T target explosions occurring along the rotational axis. Laser energy is beamed in axially from both ends. Two cost estimates were made for an 815 MWe Cascade power plant. One was based on an ''all conventional'' plant, which is constructed and costed using well-established, conventional fossil power plant methods. The second was a ''nuclear plus conventional'' design, constructed and costed using a combination of fossil and fission reactor plant methods and standards that would be typical of advanced fission reactors. The total capital requirements for the ''all conventional'' construction plant were estimated in 1985 dollars at $1490 M, including indirect costs. Similarly, the ''nuclear plus conventional'' construction plant was estimated at $1940 M. The savings of $450 M (23%) represents strictly the difference between Cascade ICF power plants designed and constructed to nuclear safety-related requirements versus all non-nuclear. This example clearly shows that, if fusion plants can take advantage of low activation materials and inherent safety features to eliminate the need for nuclear-related expenses, then such plants may have economic advantages over nuclear-grade systems. 13 refs., 1 fig., 5 tabs

Operations and maintenance costs - Selected observations

International Nuclear Information System (INIS)

Kirk, M.W.

1991-01-01

The operations and maintenance (O and M) costs associated with nuclear power plants have been rising continuously over the past decade. The Nuclear Management and Resources Council (NUMARC) has undertaken an examination of this issue to determine what components of O and M costs are driven by regulatory activity. Observers from various perspectives within the nuclear industry have cited staffing, outages, training, and management structure among others as large contributors to O and M costs. NUMARC is currently analyzing utility cost data to isolate the regulatory components for further action

The Cost of Psoriasis and Psoriatic Arthritis in 5 European Countries: A Systematic Review.

Science.gov (United States)

Burgos-Pol, R; Martínez-Sesmero, J M; Ventura-Cerdá, J M; Elías, I; Caloto, M T; Casado, M Á

2016-09-01

While the introduction of biologics has improved the quality of life of patients with psoriasis and psoriatic arthritis, it may have increased the economic burden of these diseases. To perform a systematic review of studies on the costs associated with managing and treating psoriasis and psoriatic arthritis in 5 European countries: Germany, Spain, France, Italy, and the United Kingdom. We undertook a systematic review of the literature (up to May 2015) using the MEDLINE and EMBASE databases. The methodological quality of the studies identified was evaluated using the Consolidated Health Economic Evaluation Reporting Standards checklist. We considered both direct costs (medical and nonmedical) and indirect costs, adjusted for country-specific inflation and converted to international dollars using purchasing power parity exchange rates for 2015 ($US PPP). The search retrieved 775 studies; 68.3% analyzed psoriasis and 31.7% analyzed psoriatic arthritis. The total annual cost per patient ranged from US $2,077 to US $13,132 PPP for psoriasis and from US $10,924 to US $17,050 PPP for psoriatic arthritis. Direct costs were the largest component of total expenditure in both diseases. The severity of these diseases was associated with higher costs. The introduction of biologics led to a 3-fold to 5-fold increase in direct costs, and consequently to an increase in total costs. We have analyzed the economic burden of psoriasis and psoriatic arthritis and shown that costs increase with the treatment and management of more severe disease and the use of biologics. Copyright © 2016 AEDV. Publicado por Elsevier España, S.L.U. All rights reserved.

Toward sustainable harvesting of Africa's largest medicinal plant ...

African Journals Online (AJOL)

Global demand for treating prostate disorders with Prunus africana bark extract has made P. africana Africa's largest medicinal plant export. Unsustainable harvesting practices can lead to local extirpations of this multipurpose tree. Survey research targeting P. africana harvesters in a Tanzania forest reserve revealed that ...

Social costs of road crashes: An international analysis.

Science.gov (United States)

Wijnen, Wim; Stipdonk, Henk

2016-09-01

This paper provides an international overview of the most recent estimates of the social costs of road crashes: total costs, value per casualty and breakdown in cost components. The analysis is based on publications about the national costs of road crashes of 17 countries, of which ten high income countries (HICs) and seven low and middle income countries (LMICs). Costs are expressed as a proportion of the gross domestic product (GDP). Differences between countries are described and explained. These are partly a consequence of differences in the road safety level, but there are also methodological explanations. Countries may or may not correct for underreporting of road crashes, they may or may not use the internationally recommended willingness to pay (WTP)-method for estimating human costs, and there are methodological differences regarding the calculation of some other cost components. The analysis shows that the social costs of road crashes in HICs range from 0.5% to 6.0% of the GDP with an average of 2.7%. Excluding countries that do not use a WTP- method for estimating human costs and countries that do not correct for underreporting, results in average costs of 3.3% of GDP. For LMICs that do correct for underreporting the share in GDP ranges from 1.1% to 2.9%. However, none of the LMICs included has performed a WTP study of the human costs. A major part of the costs is related to injuries: an average share of 50% for both HICs and LMICs. The average share of fatalities in the costs is 23% and 30% respectively. Prevention of injuries is thus important to bring down the socio-economic burden of road crashes. The paper shows that there are methodological differences between countries regarding cost components that are taken into account and regarding the methods used to estimate specific cost components. In order to be able to make sound comparisons of the costs of road crashes across countries, (further) harmonization of cost studies is recommended. This can be

Incidence and costs of achalasia in The Netherlands

NARCIS (Netherlands)

van Hoeij, F. B.; Ponds, F. A.; Smout, A. J.; Bredenoord, A. J.

2018-01-01

Recent reports show increasing incidence of achalasia in some populations. The aim of this study was to estimate incidence, prevalence, and healthcare costs of achalasia in a large cohort in The Netherlands. Data were obtained from the largest Dutch healthcare insurance company (±4.4 million

Incidence and Costs of Clostridium difficile Infections in Canada

Science.gov (United States)

Levy, Adrian R.; Szabo, Shelagh M.; Lozano-Ortega, Greta; Lloyd-Smith, Elisa; Leung, Victor; Lawrence, Robin; Romney, Marc G.

2015-01-01

Background. Limited data are available on direct medical costs and lost productivity due to Clostridium difficile infection (CDI) in Canada. Methods. We developed an economic model to estimate the costs of managing hospitalized and community-dwelling patients with CDI in Canada. The number of episodes was projected based on publicly available national rates of hospital-associated CDI and the estimate that 64% of all CDI is hospital-associated. Clostridium difficile infection recurrences were classified as relapses or reinfections. Resource utilization data came from published literature, clinician interviews, and Canadian CDI surveillance programs, and this included the following: hospital length of stay, contact with healthcare providers, pharmacotherapy, laboratory testing, and in-hospital procedures. Lost productivity was considered for those under 65 years of age, and the economic impact was quantified using publicly available labor statistics. Unit costs were obtained from published sources and presented in 2012 Canadian dollars. Results. There were an estimated 37 900 CDI episodes in Canada in 2012; 7980 (21%) of these were relapses, out of a total of 10 900 (27%) episodes of recurrence. The total cost to society of CDI was estimated at $281 million; 92% ($260 million) was in-hospital costs, 4% ($12 million) was direct medical costs in the community, and 4% ($10 million) was due to lost productivity. Management of CDI relapses alone accounted for $65.1 million (23%). Conclusions. The largest proportion of costs due to CDI in Canada arise from extra days of hospitalization. Interventions reducing the severity of infection and/or relapses leading to rehospitalizations are likely to have the largest absolute effect on direct medical costs. PMID:26191534

Principal component analysis of solar flares in the soft X-ray flux

International Nuclear Information System (INIS)

Teuber, D.L.; Reichmann, E.J.; Wilson, R.M.; National Aeronautics and Space Administration, Huntsville, AL

1979-01-01

Principal component analysis is a technique for extracting the salient features from a mass of data. It applies, in particular, to the analysis of nonstationary ensembles. Computational schemes for this task require the evaluation of eigenvalues of matrices. We have used EISPACK Matrix Eigen System Routines on an IBM 360-75 to analyze full-disk proportional-counter data from the X-ray event analyzer (X-REA) which was part of the Skylab ATM/S-056 experiment. Empirical orthogonal functions have been derived for events in the soft X-ray spectrum between 2.5 and 20 A during different time frames between June 1973 and January 1974. Results indicate that approximately 90% of the cumulative power of each analyzed flare is contained in the largest eigenvector. The first two largest eigenvectors are sufficient for an empirical curve-fit through the raw data and a characterization of solar flares in the soft X-ray flux. Power spectra of the two largest eigenvectors reveal a previously reported periodicity of approximately 5 min. Similar signatures were also obtained from flares that are synchronized on maximum pulse-height when subjected to a principal component analysis. (orig.)

Kabob report. Pt. 3. Chevron plant largest in Canada

Energy Technology Data Exchange (ETDEWEB)

1971-01-18

Canada's largest fully integrated primary natural- gas processing and sulfur recovery plant is heading for physical completion by mid-summer of 1971. The Ralph M. Parsons Construction Co. of Canada Ltd., contractor for the S. Kaybob Beaverhill Lake Unit No. 3 gas-processing plant, to be operated by Chevron Standard Ltd., estimates completion by June 30. After that the $80 million complex will have tests and running in time. With any reasonable luck, it should be fully on stream by late summer. Preliminary construction on the 200-acre site started in Jan. 1969 with clearing and contouring of the main plant and sulfur storage sites. Initial rough grading started in the early summer, after spring breakup was over. Delivery of most of the big items was made by rail because the local secondary roads were inadequate for them. Concrete has been a large item. The contractor has its own batch plant on the site for the estimated 28,000 cu yd which will be needed for the whole job. Dominating the construction site from the start has been the high sulfur plant stack, first of the major items to be finished. It will serve to dispose of effluent from the largest sulfur recovery unit in Canada. It is 465 ft high, one of the largest in Alberta, and a significant contribution to pollution control and environmental protection.

Costs of Loyalty Programmes Implementation in Pharmacies

Directory of Open Access Journals (Sweden)

Maria Sierpińska

2010-10-01

Full Text Available Receiving the customer is in todays market realities top marketing companies. The build a sustainable partnership relation between the seller and the buyer is decide on businesses, takings and profit potential. Increasingly, therefore, perpetuates the view that create lasting relationships is an essential factor in improving the effectiveness of marketing activities conducted by modern businesses. The paper presents the implementation costs of loyalty programmes in pharmacies. These costs are presented based on a study of one of the largest pharmacy loyalty programmes in Poland: I care for health.

Costs and potentials of energy conservation in China's coal-fired power industry: A bottom-up approach considering price uncertainties

International Nuclear Information System (INIS)

Chen, Hao; Kang, Jia-Ning; Liao, Hua; Tang, Bao-Jun; Wei, Yi-Ming

2017-01-01

Energy conservation technologies in the coal-fired power sector are important solutions for the environmental pollution and climate change issues. However, a unified framework for estimating their costs and potentials is still needed due to the wide technology choices, especially considering their economic feasibility under fuel and carbon price uncertainties. Therefore, this study has employed a bottom-up approach to analyze the costs and potentials of 32 key technologies’ new promotions during the 13th Five-Year Plan period (2016–2020), which combines the conservation supply curve (CSC) approach and break-even analysis. Findings show that (1) these 32 technologies have a total coal conservation potential of 275.77 Mt with a cost of 238.82 billion yuan, and their break-even coal price is 866 yuan/ton. (2) steam-water circulation system has the largest energy conservation potential in the coal-fired power industry. (3) considering the co-benefits will facilitate these technologies’ promotions, because their break-even coal prices will decrease by 2.35 yuan/ton when the carbon prices increase by 1 yuan/ton. (4) discount rates have the largest impacts on the technologies’ cost-effectiveness, while the future generation level affect their energy conservation potentials most. - Highlights: • The 32 technologies can save 275.77 Mt coal with a cost of 238.82 billion yuan. • The steam-water circulation system has the largest energy conservation potential. • Considering the co-benefits will facilitate the technology promotions • Discount rates have the largest impacts on the technologies’ cost-effectiveness.

Collaborating to Cut Costs in Higher Education

Science.gov (United States)

Hassett, Tracy

2017-01-01

Tuition prices at colleges and universities are high. It is also true that salaries and benefits are the single biggest chunk of every higher education institution's (HEI) budget. And one of the largest and most difficult costs to contain is group employee health insurance. The situation is particularly difficult for smaller New England HEIs…

Cost trend analysis of initial cancer treatment in Taiwan.

Directory of Open Access Journals (Sweden)

Tsai-Yun Li

Full Text Available BACKGROUND: Despite the high cost of initial cancer care, that is, care in the first year after diagnosis, limited information is available for specific categories of cancer-related costs, especially costs for specific services. This study purposed to identify causes of change in cancer treatment costs over time and to perform trend analyses of the percentage of cancer patients who had received a specific treatment type and the mean cost of care for patients who had received that treatment. METHODOLOGY/PRINCIPAL FINDINGS: The analysis of trends in initial treatment costs focused on cancer-related surgery, chemotherapy, radiation therapy, and treatments other than active treatments. For each cancer-specific trend, slopes were calculated for regression models with 95% confidence intervals. Analyses of patients diagnosed in 2007 showed that the National Health Insurance (NHI system paid, on average, $10,780 for initial care of a gastric cancer patient and $10,681 for initial care of a lung cancer patient, which were inflation-adjusted increases of $6,234 and $5,522, respectively, over the 1996 care costs. During the same interval, the mean NHI payment for initial care for the five specific cancers increased significantly (p<0.05. Hospitalization costs comprised the largest portion of payments for all cancers. During 1996-2007, the use of chemotherapy and radiation therapy significantly increased in all cancer types (p<0.05. In 2007, NHI payments for initial care for these five cancers exceeded $12 billion, and gastric and lung cancers accounted for the largest share. CONCLUSIONS/SIGNIFICANCE: In addition to the growing number of NHI beneficiaries with cancer, treatment costs and the percentage of patients who undergo treatment are growing. Therefore, the NHI must accurately predict the economic burden of new chemotherapy agents and radiation therapies and may need to develop programs for stratifying patients according to their potential benefit

The system of account and control of logistics costs

Directory of Open Access Journals (Sweden)

Khayrullin Rustam Zinnatullovich

Full Text Available The process of organization of civil engineering provides the delivery of construction materials, equipment to the civil engineering objects in the required quantities at the specified time. Effective tool for solving this problem is logistics. The basic components of logistics costs, which occupy the largest share in the sum of all logistics costs, are transportation costs and storage costs. The civil engineering industry is very promising for the use of outsourcing. The main part of works on providing material and technical resources in most cases is transferred to the outsourcing of other companies, including the group of companies forming the holding. In large holding companies the chain of movement of materials, goods and productions: purchase of materials and goods, completion materials, production structures, storage, movement, transportation, etc. may include several companies belonging in holding. The goods can be moved from one warehouse to another, with or without change of the owner of goods. Each company is obliged to show each movement of goods in their financial accounting. During the goods’ movement within a group of companies from one storage to another, from one owner to another, the total costs of the goods rise. Sales within a group of companies lead, as a rule, to a gain by one of the companies and the logistic expenses of another company. Selling to a consumer provides a profit to the seller company. Therefore, the problem of adequate allocation of logistics expenses and profits between separate legal entity and the task of continuous accounting and control of logistics costs and earnings in large companies, is vital. The automated system for accounting and controlling of logistics costs is suggested. The developed system allows controlling logistics costs of refining, storage and transportation for each ton, pieces, linear or square meters of the shipped cargoes. The System is based on complex algorithms of distribution

An Introduction to Cost-of-Living Adjustments in Public Retirement Plans: Details Matter

Science.gov (United States)

Jennings, Penelope R.; Jennings, William P.; Phillips, G. Michael

2016-01-01

While financial planning students are expected to be able to understand client retirement plans, subtle differences in cost-of-living adjustments can have major impact on the success of client retirement plans. This teaching note compares the cost-of-living adjustments in the largest government sponsored retirement systems and a hypothetical…

Upgrade and modernization of the six largest HPPs in Macedonia

International Nuclear Information System (INIS)

Hadzievska, M.

2002-01-01

In 1998, Electric Power Company of Macedonia and the International Bank for Development and Reconstruction, started the Power System Improvement Project a part of which is the Project for rehabilitation of the six largest Hydro Power Plants (HPPs) in the Republic of Macedonia. The six largest Hydro Power Plants (HPP Vrutok, HPP Raven, HPP Globocica, HPP Tikves and HPP Spilje and HPP Vrben) represent 91% of the country's hydropower capacity. The rehabilitation program is divided in five parts (contracts) and covers the refurbishment of: turbine runners, turbine and generator bearings, governors, inlet valves; butterfly valves, including accessories and control systems; generators, excitation system and voltage regulation; control system, protection and LV auxiliaries; switch gears and control gears in 220 kV, 110 kV and 35 kV substations. At the moment, only the implementation of switch gears has started, the first phase is already finished, and 50 % of the rehabilitation works for HPP Vrutok, the largest HPP, has been finished. With the realization of this project, greater hydropower production is expected. It also expected that HPPs will become a more vital part of the Macedonian power system

Distribution costs -- the cost of local delivery

International Nuclear Information System (INIS)

Winger, N.; Zarnett, P.; Carr, J.

2000-01-01

Most of the power transmission system in the province of Ontario is owned and operated as a regulated monopoly by Ontario Hydro Services Company (OHSC). Local distribution systems deliver to end-users from bulk supply points within a service territory. OHSC distributes to approximately one million, mostly rural customers, while the approximately 250 municipal utilities together serve about two million, mostly urban customers. Under the Energy Competition Act of 1998 local distribution companies will face some new challenges, including unbundled billing systems, a broader range of distribution costs, increased costs, made up of corporate taxes or payments in lieu of taxes and added costs for regulatory affairs. The consultants provide a detailed discussion of the components of distribution costs, the three components of the typical budget process (capital expenditures, (CAPEX), operating and maintenance (O and M) and administration and corporate (GA and C), a summary of some typical distribution costs in Ontario, and the estimated impacts of the Energy Competition Act (ECA) compliance on charges and rates. Various mitigation strategies are also reviewed. Among these are joint ventures by local distribution companies to reduce ECA compliance costs, re-examination of controllable costs, temporary reduction of the allowable return on equity (ROE) by 50 per cent, and/or reducing the competitive transition charge (CTC). It is estimated that either one of these two reductions could eliminate the full amount of the five to seven per cent uplift in delivered energy service costs. The conclusion of the consultants is that local distribution delivery charges will make up a greater proportion of end-user cost in the future than it has in the past. An increase to customers of about five per cent is expected when the competitive electricity market opens and unbundled billing begins. The cost increase could be mitigated by a combination of actions that would be needed for about

Principal Component and Cluster Analysis as a Tool in the Assessment of Tomato Hybrids and Cultivars

Directory of Open Access Journals (Sweden)

G. Evgenidis

2011-01-01

Full Text Available Determination of germplasm diversity and genetic relationships among breeding materials is an invaluable aid in crop improvement strategies. This study assessed the breeding value of tomato source material. Two commercial hybrids along with an experimental hybrid and four cultivars were assessed with cluster and principal component analyses based on morphophysiological data, yield and quality, stability of performance, heterosis, and combining abilities. The assessment of commercial hybrids revealed a related origin and subsequently does not support the identification of promising offspring in their crossing. The assessment of the cultivars discriminated them according to origin and evolutionary and selection effects. On the Principal Component 1, the largest group with positive loading included, yield components, heterosis, general and specific combining ability, whereas the largest negative loading was obtained by qualitative and descriptive traits. The Principal Component 2 revealed two smaller groups, a positive one with phenotypic traits and a negative one with tolerance to inbreeding. Stability of performance was loaded positively and/or negatively. In conclusion, combing ability, yield components, and heterosis provided a mechanism for ensuring continued improvement in plant selection programs.

20 CFR 228.60 - Cost-of-living increase.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Cost-of-living increase. 228.60 Section 228... COMPUTATION OF SURVIVOR ANNUITIES The Tier II Annuity Component § 228.60 Cost-of-living increase. The tier II... tier II component at the time the survivor annuity begins, all cost-of-living increases that were...

Can a Costly Intervention Be Cost-effective?

Science.gov (United States)

Foster, E. Michael; Jones, Damon

2009-01-01

Objectives To examine the cost-effectiveness of the Fast Track intervention, a multi-year, multi-component intervention designed to reduce violence among at-risk children. A previous report documented the favorable effect of intervention on the highest-risk group of ninth-graders diagnosed with conduct disorder, as well as self-reported delinquency. The current report addressed the cost-effectiveness of the intervention for these measures of program impact. Design Costs of the intervention were estimated using program budgets. Incremental cost-effectiveness ratios were computed to determine the cost per unit of improvement in the 3 outcomes measured in the 10th year of the study. Results Examination of the total sample showed that the intervention was not cost-effective at likely levels of policymakers' willingness to pay for the key outcomes. Subsequent analysis of those most at risk, however, showed that the intervention likely was cost-effective given specified willingness-to-pay criteria. Conclusions Results indicate that the intervention is cost-effective for the children at highest risk. From a policy standpoint, this finding is encouraging because such children are likely to generate higher costs for society over their lifetimes. However, substantial barriers to cost-effectiveness remain, such as the ability to effectively identify and recruit such higher-risk children in future implementations. PMID:17088509

World's third-largest producer of nuclear power. Japan in need of energy

International Nuclear Information System (INIS)

Anon.

2008-01-01

Japan is the third largest oil consumer in the world behind the United States and China, and the second largest net importer of oil. Japan boasts one of the largest economies in the world. The country continues to experience a moderate economic recovery that began in 2003, following a decade of economic stagnation. Japan's real gross domestic product (GDP) grew by 2.5% in 2005 and 2.3% in 2004. The modest upturn over the last few years reflects higher business confidence in Japan, a surge in export demand led by exports to China, and robust consumer spending. Unemployment in Japan fell to 4.4% in 2005, down from an early 2003 peak of 5.5%. Japan has virtually no domestic oil or natural gas reserves, and in 2005 was the second largest net importer of crude oil in the world. Despite the country's dearth of hydrocarbon resources, Japanese companies have actively pursued upstream oil and natural gas projects overseas. Japan remains one of the major exporters of energy-sector capital equipment, and Japanese companies provide engineering, construction, and project management services for energy projects. (orig.)

NGL component tracking and balancing : a producer perspective

International Nuclear Information System (INIS)

Brown, D.

1999-01-01

The issue of whether NGL producers in Alberta will transport their NGLs in liquid form or in the more economic gaseous form was discussed. The answer will depend on whether the industry can develop a cost effective component tracking infrastructure and negotiate a fair component balancing methodology which will allow shippers to be kept whole on each of their NGL components. Component tracking would measure the energy value of each component of methane, ethane, propane, butanes and condensates at every receipt and delivery point on the gas transmission system. The cost for component tracking would involve the physical need for improved measurement equipment at most receipt and delivery points, the development of sophisticated tracking software, and the value loss of being forced to sell some NGLs as gas into the local Alberta market. It is assumed that these costs can be accurately estimated, although there is less optimism about whether a methodology for negotiating a fair and equitable allocation system could ever be reached. To highlight the difficulties, some of the obstacles and barriers to reaching agreement are reviewed. In discussing the sources of the problem, it is suggested that if the Alliance Pipeline becomes something other than originally envisioned, something that no longer pose a threat to Nova throughputs or gas richness, discussion of component tracking and balancing will likely slowly slide into oblivion

Incentives and opportunities for reducing the cobalt content in reactor core components

International Nuclear Information System (INIS)

Ocken, H.

1985-01-01

Cobalt in core components contributes to radiation field buildup on out-of-core surfaces. Core components containing cobalt-base alloys and cobalt as an impurity are identified. The use of cobalt-free wear-resistant alloys and construction materials with lower impurity levels of cobalt is disused. It is argued that such measures are cost effective. Lower radiation fields and disposal costs will offset higher raw material costs. Component performance will not be affected. (author)

Nanograined Net-Shaped Fabrication of Rhenium Components by EB-PVD

International Nuclear Information System (INIS)

Singh, Jogender; Wolfe, Douglas E.

2004-01-01

Cost-effective net-shaped forming components have brought considerable interest into DoD, NASA and DoE. Electron beam physical vapor deposition (EB-PVD) offers flexibility in forming net-shaped components with tailored microstructure and chemistry. High purity rhenium (Re) components including rhenium-coated graphite balls, Re- plates and tubes have been successfully manufactured by EB-PVD. EB-PVD Re components exhibited sub-micron and nano-sized grains with high hardness and strength as compared to CVD. It is estimated that the cost of Re components manufactured by EB-PVD would be less than the current CVD and powder-HIP Technologies

NAFTA: The World's Largest Trading Zone Turns 20

Science.gov (United States)

Ferrarini, Tawni Hunt; Day, Stephen

2014-01-01

Everyone under the age of 20 who has grown up in North America has lived in the common market created by NAFTA--the North American Free Trade Agreement. In a zone linking the United States, Canada, and Mexico, most goods and investments flow freely across borders to users, consumers, and investors. In 1994, NAFTA created the largest relatively…

Real time pricing as a component of least-cost power strategies

International Nuclear Information System (INIS)

Caramanis, M.C.; Tabors, R.D.; Daryanian, B.

1991-01-01

This paper reports on Real Time Pricing (RTP) that is an electricity rate which varies with time in order to reflect the electric utility's time varying costs of generation, transmission, and distribution. Because RTP improves the economic efficiency of overall operation of the electric system, it can provide benefits to both the utility and the customers. It is a strategic tool which provides customers with the same type of cost and load management signals that are provided to the electric supply system. It is a critical element in economically efficient least-cost strategies because it provides the customer with symmetric signals that encourage both reduction in consumption (high prices) and also increases in consumption (low prices). This characteristic of symmetry makes it a unique method relative to others in the field of conservation and load management because RTP can be used to dispatch the customers; load, not merely turn it off when and if required by the utility. In the process of developing and implementing least-cost strategies, RTP can provide significant incremental benefits to existing demand-side as well as supply-side programs

Inequalities in the distribution of the costs of alcohol misuse in Scotland: a cost of illness study.

Science.gov (United States)

Johnston, Marjorie C; Ludbrook, Anne; Jaffray, Mariesha A

2012-01-01

To examine the distribution of the costs of alcohol misuse across Scotland in 2009/2010, in relation to deprivation. A cost of illness approach was used. Alcohol-related harmful effects were assessed for inclusion using a literature review. This was based upon the following categories: direct healthcare costs, intangible health costs, social care costs, crime costs and labour and productivity costs. An analysis of secondary data supplemented by a literature review was carried out to quantify each harmful effect, determine its value and provide an estimate of the distribution by deprivation. The deprivation distributions used were area measures (primarily the Scottish Index of Multiple Deprivation). The overall cost was £7457 million. Two alcohol harmful effects were not included in the overall cost by deprivation due to a lack of data. These were 'children's social work and hearing system' and the criminal justice system costs from 'alcohol-specific offences'. The included alcohol harmful effects demonstrated that 40.41% of the total cost arose from the 20% most deprived areas. The intangible cost category was the largest category (78.65%). The study found that the burden of alcohol harmful effects is greater in deprived groups and these burdens do not simply arise from deprived groups but are also experienced more by these groups. The study was limited by a lack of data availability in certain areas, leading to less-precise cost estimates.

Reactor cost driving items

International Nuclear Information System (INIS)

Spears, W.R.

1987-01-01

Assuming that the design solutions presently perceived for NET can be extrapolated for use in a power reactor, and using costing experience with present day fusion experiments and with fission power plants, the major components of the cost of a tokamak fusion power reactor are described. The analysis shows the emphasis worth placing on various areas of plant design to reduce costs

OpCost: an open-source system for estimating costs of stand-level forest operations

Science.gov (United States)

Conor K. Bell; Robert F. Keefe; Jeremy S. Fried

2017-01-01

This report describes and documents the OpCost forest operations cost model, a key component of the BioSum analysis framework. OpCost is available in two editions: as a callable module for use with BioSum, and in a stand-alone edition that can be run directly from R. OpCost model logic and assumptions for this open-source tool are explained, references to the...

Expanding the usefulness of unit supply cost

International Nuclear Information System (INIS)

McKenzie, M.B.; Petr, K.

1992-01-01

Unit supply cost is a widely used tool in the energy business for providing a one number-unit cost description. For example, controllable costs such as finding costs, development costs and operating costs have traditionally been described in an average cost per unit of reserves format for the oil and gas industry, however using this approach on more specific applications is not always informative. Projects with widely varying controllable parameters can still yield the same unit cost, making comparisons difficult. The application of unit supply cost can be readily expanded by adding a new unit cost component termed cost of capital. This element introduces the impacts of timing and return on investment into the supply cost determination through discounting annual costs. The cost of capital component adds the ability to represent a project's unique characteristics, particularly reserves' depletion rate and the timing or phasing of development. Introducing the cost of capital element into the supply cost analysis provides additional information and improves the likelihood of drawing correct conclusions when comparing and ranking projects. 4 figs., 6 tabs

The Environmental Responsibility of the World’s Largest Banks

Directory of Open Access Journals (Sweden)

Ryszawska Bożena

2018-03-01

Full Text Available Sustainability transition is changing the role and function of banks, specially their products and services also in relation to stakeholders. Banks are one of the main actors supporting the transition to sustainable economy. The purpose of this study is to emphasise the role of world’s largest banks in that process. Banks are slowly responding to the new demand of sustainability and responsibility, and they try to align with it. The paper is based on an overview of the world’s five largest banks that employ corporate social responsibility (CSR reporting standards, together with detailed enumeration of pro-environmental activities included in the reports. The first section of this paper presents the most popular approaches to the problem at hand, as reported in professional literature. Section two presents the characteristics of the CSR actions in banks. The third section discusses the environmental actions of the biggest banks in Global Reporting Initiative (GRI reporting the most popular standard for reporting non-financial information. And the last part of the paper presents the conclusions resulting from the article. The research was conducted using a variety of sources, such as scientific articles, statistical data, CSR reports of the world’s largest banks, as well reporting principles and standard disclosures. The basic method used in the process of writing was a critical analysis of literature and reports concerning the CSR reporting standards, environmental responsibilities of different kinds of entities, as well as own observations based on special reports of banks. In the article, also the analysis of financial market data, induction method and comparison method have been used. The main conclusions of the analysis of the CSR reports disclosed by the world’s largest banks confirm all three of the theses presented in the article. The findings suggest that the banks under study can be regarded as environmentally responsible

Rethinking sunk costs

International Nuclear Information System (INIS)

Capen, E.C.

1991-01-01

As typically practiced in the petroleum/ natural gas industry, most economic calculations leave out sunk costs. Integrated businesses can be hurt by the omission of sunk costs because profits and costs are not allocated properly among the various business segments. Not only can the traditional sunk-cost practice lead to predictably bad decisions, but a company that operates under such a policy will have no idea how to allocate resources among its operating components; almost none of its calculated returns will be correct. This paper reports that the solution is to include asset value as part of the investment in the calculation

Humans, 'things' and space: costing hospital infection control interventions.

Science.gov (United States)

Page, K; Graves, N; Halton, K; Barnett, A G

2013-07-01

Previous attempts at costing infection control programmes have tended to focus on accounting costs rather than economic costs. For studies using economic costs, estimates tend to be quite crude and probably underestimate the true cost. One of the largest costs of any intervention is staff time, but this cost is difficult to quantify and has been largely ignored in previous attempts. To design and evaluate the costs of hospital-based infection control interventions or programmes. This article also discusses several issues to consider when costing interventions, and suggests strategies for overcoming these issues. Previous literature and techniques in both health economics and psychology are reviewed and synthesized. This article provides a set of generic, transferable costing guidelines. Key principles such as definition of study scope and focus on large costs, as well as pitfalls (e.g. overconfidence and uncertainty), are discussed. These new guidelines can be used by hospital staff and other researchers to cost their infection control programmes and interventions more accurately. Copyright © 2013 The Healthcare Infection Society. Published by Elsevier Ltd. All rights reserved.

Nuclear power generation cost methodology

International Nuclear Information System (INIS)

Delene, J.G.; Bowers, H.I.

1980-08-01

A simplified calculational procedure for the estimation of nuclear power generation cost is outlined. The report contains a discussion of the various components of power generation cost and basic equations for calculating that cost. An example calculation is given. The basis of the fixed-charge rate, the derivation of the levelized fuel cycle cost equation, and the heavy water charge rate are included as appendixes

[Costs and benefits of quality management].

Science.gov (United States)

Schroeder-Printzen, I

2014-01-01

The establishment of quality management (QM) has been mandatory for health care providers of the national health insurance since 2004; however, certification is so far only compulsory for rehabilitation clinics. The costs have so far only been quantified in a few medical studies, while they are widely known in business administration with a basic distinction made between planning, steering, auditing, and declaration costs. Another business economics approach differentiates between prevention, appraisal, and non-conformance costs. The benefits of QM relates to customers, employees, external service providers, and health insurance providers. Also important in our consideration of the patient as a customer is that they should not be considered a customer in the usual business sense because the patient is in an emergency situation and can not freely decide. Improvements in treatment quality and in reducing the rate of adverse events make up the largest portion of the benefits of QM. Furthermore, QM can have a positive influence on motivation and employee recruitment. In addition, the cost savings that result despite costs for QM must not be forgotten.

Statistics of the largest sunspot and facular areas per solar cycle

International Nuclear Information System (INIS)

Willis, D.M.; Kabasakal Tulunay, Y.

1979-01-01

The statistics of extreme values is used to investigate the statistical properties of the largest areas sunspots and photospheric faculae per solar cycle. The largest values of the synodic-solar-rotation mean areas of umbrae, whole spots and faculae, which have been recorded for nine solar cycles, are each shown to comply with the general form of the extreme value probability function. Empirical expressions are derived for the three extreme value populations from which the characteristic statistical parameters, namely the mode, median, mean and standard deviation, can be calculated for each population. These three extreme value populations are also used to find the expected ranges of the extreme areas in a group of solar cycles as a function of the number of cycles in the group. The extreme areas of umbrae and whole spots have a dispersion comparable to that found by Siscoe for the extreme values of sunspot number, whereas the extreme areas of faculae have a smaller dispersion which is comparable to that found by Siscoe for the largest geomagnetic storm per solar cycle. The expected range of the largest sunspot area per solar cycle for a group of one hundred cycles appears to be inconsistent with the existence of the prolonged periods of sunspot minima that have been inferred from the historical information on solar variability. This inconsistency supports the contention that there are temporal changes of solar-cycle statistics during protracted periods of sunspot minima (or maxima). Indeed, without such temporal changes, photospheric faculae should have been continually observable throughout the lifetime of the Sun. (orig.)

The cost of antibiotic mass drug administration for trachoma control in a remote area of South Sudan.

Science.gov (United States)

Kolaczinski, Jan H; Robinson, Emily; Finn, Timothy P

2011-10-01

Mass drug administration (MDA) of antibiotics is a key component of the so-called "SAFE" strategy for trachoma control, while MDA of anthelminthics provides the cornerstone for control of a number of other neglected tropical diseases (NTDs). Simultaneous delivery of two or more of these drugs, renowned as "integrated NTD control," is being promoted to reduce costs and expand intervention coverage. A cost analysis was conducted alongside an MDA campaign in a remote trachoma endemic area, to inform budgeting for NTD control in South Sudan. A first round of antibiotic MDA was conducted in the highly trachoma endemic county of Mayom, Unity state, from June to August 2010. A core team of seven staff delivered the intervention, including recruitment and training of 44 supervisors and 542 community drug distributors. Using an ingredients approach, financial and economic costs were captured from the provider perspective in a detailed costing database. Overall, 123,760 individuals were treated for trachoma, resulting in an estimated treatment coverage of 94%. The economic cost per person treated was USD 1.53, excluding the cost of the antibiotic azithromycin. Ninety four per cent of the delivery costs were recurrent costs, with personnel and travel/transport costs taking up the largest share. In a remote setting and for the initial round, MDA of antibiotics was considerably more expensive than USD 0.5 per person treated, an estimate frequently quoted to advocate for integrated NTD control. Drug delivery costs in South Sudan are unlikely to decrease substantially during subsequent MDA rounds, as the major cost drivers were recurrent costs. MDA campaigns for delivery of one or more drugs in South Sudan should thus be budgeted at around USD 1.5 per person treated, at least until further costing data for delivery of other NTD drugs, singly or in combination, are available.

The cost of antibiotic mass drug administration for trachoma control in a remote area of South Sudan.

Directory of Open Access Journals (Sweden)

Jan H Kolaczinski

2011-10-01

Full Text Available BACKGROUND: Mass drug administration (MDA of antibiotics is a key component of the so-called "SAFE" strategy for trachoma control, while MDA of anthelminthics provides the cornerstone for control of a number of other neglected tropical diseases (NTDs. Simultaneous delivery of two or more of these drugs, renowned as "integrated NTD control," is being promoted to reduce costs and expand intervention coverage. A cost analysis was conducted alongside an MDA campaign in a remote trachoma endemic area, to inform budgeting for NTD control in South Sudan. METHODS AND FINDINGS: A first round of antibiotic MDA was conducted in the highly trachoma endemic county of Mayom, Unity state, from June to August 2010. A core team of seven staff delivered the intervention, including recruitment and training of 44 supervisors and 542 community drug distributors. Using an ingredients approach, financial and economic costs were captured from the provider perspective in a detailed costing database. Overall, 123,760 individuals were treated for trachoma, resulting in an estimated treatment coverage of 94%. The economic cost per person treated was USD 1.53, excluding the cost of the antibiotic azithromycin. Ninety four per cent of the delivery costs were recurrent costs, with personnel and travel/transport costs taking up the largest share. CONCLUSIONS: In a remote setting and for the initial round, MDA of antibiotics was considerably more expensive than USD 0.5 per person treated, an estimate frequently quoted to advocate for integrated NTD control. Drug delivery costs in South Sudan are unlikely to decrease substantially during subsequent MDA rounds, as the major cost drivers were recurrent costs. MDA campaigns for delivery of one or more drugs in South Sudan should thus be budgeted at around USD 1.5 per person treated, at least until further costing data for delivery of other NTD drugs, singly or in combination, are available.

Fishing down the largest coral reef fish species.

Science.gov (United States)

Fenner, Douglas

2014-07-15

Studies on remote, uninhabited, near-pristine reefs have revealed surprisingly large populations of large reef fish. Locations such as the northwestern Hawaiian Islands, northern Marianas Islands, Line Islands, U.S. remote Pacific Islands, Cocos-Keeling Atoll and Chagos archipelago have much higher reef fish biomass than islands and reefs near people. Much of the high biomass of most remote reef fish communities lies in the largest species, such as sharks, bumphead parrots, giant trevally, and humphead wrasse. Some, such as sharks and giant trevally, are apex predators, but others such as bumphead parrots and humphead wrasse, are not. At many locations, decreases in large reef fish species have been attributed to fishing. Fishing is well known to remove the largest fish first, and a quantitative measure of vulnerability to fishing indicates that large reef fish species are much more vulnerable to fishing than small fish. The removal of large reef fish by fishing parallels the extinction of terrestrial megafauna by early humans. However large reef fish have great value for various ecological roles and for reef tourism. Copyright © 2014 Elsevier Ltd. All rights reserved.

Cost, energy use and GHG emissions for forest biomass harvesting operations

International Nuclear Information System (INIS)

Zhang, Fengli; Johnson, Dana M.; Wang, Jinjiang; Yu, Chunxia

2016-01-01

For forest-based biomass to become a significant contribution to the United States' energy portfolio, harvesting operations must be physically feasible and economically viable. An assessment of cost, energy and greenhouse gas (GHG) emissions of forest biomass harvesting was conducted. The assessment differentiates harvesting systems by cut-to-length and whole tree; harvest types of 30%, 70%, and 100% cut; and forest types of hardwoods, softwoods, mixed hardwood/softwood, and softwood plantations. Harvesting cost models were developed for economic assessment and life cycle energy and emission assessment was applied to calculate energy and emissions for different harvesting scenarios, considering material and energy inputs (machinery, diesel, etc.) and outputs (GHG emissions) for each harvesting process (felling, forwarding/skidding, etc.). The developed harvesting cost models and the life cycle energy and emission assessment method were applied in Michigan, U.S. using information collected from different sources. A sensitivity analysis was performed for selected input variables for the harvesting operations in order to explore their relative importance. The results indicated that productivity had the largest impact on harvesting cost followed by machinery purchase price, yearly scheduled hours, and expected utilization. Productivity and fuel use, as well as fuel factors, are the most influential environmental impacts of harvesting operations. - Highlights: • Life cycle energy and emissions for forest biomass harvesting operations. • Harvesting cost models were developed for economic assessment. • Productivity had the largest impact on harvesting cost. • Fuel use contributes the most emissions while lubricants contribute the least.

Process development and exergy cost sensitivity analysis of a hybrid molten carbonate fuel cell power plant and carbon dioxide capturing process

Science.gov (United States)

Mehrpooya, Mehdi; Ansarinasab, Hojat; Moftakhari Sharifzadeh, Mohammad Mehdi; Rosen, Marc A.

2017-10-01

An integrated power plant with a net electrical power output of 3.71 × 105 kW is developed and investigated. The electrical efficiency of the process is found to be 60.1%. The process includes three main sub-systems: molten carbonate fuel cell system, heat recovery section and cryogenic carbon dioxide capturing process. Conventional and advanced exergoeconomic methods are used for analyzing the process. Advanced exergoeconomic analysis is a comprehensive evaluation tool which combines an exergetic approach with economic analysis procedures. With this method, investment and exergy destruction costs of the process components are divided into endogenous/exogenous and avoidable/unavoidable parts. Results of the conventional exergoeconomic analyses demonstrate that the combustion chamber has the largest exergy destruction rate (182 MW) and cost rate (13,100 /h). Also, the total process cost rate can be decreased by reducing the cost rate of the fuel cell and improving the efficiency of the combustion chamber and heat recovery steam generator. Based on the total avoidable endogenous cost rate, the priority for modification is the heat recovery steam generator, a compressor and a turbine of the power plant, in rank order. A sensitivity analysis is done to investigate the exergoeconomic factor parameters through changing the effective parameter variations.

The Multivariate Largest Lyapunov Exponent as an Age-Related Metric of Quiet Standing Balance

Directory of Open Access Journals (Sweden)

Kun Liu

2015-01-01

Full Text Available The largest Lyapunov exponent has been researched as a metric of the balance ability during human quiet standing. However, the sensitivity and accuracy of this measurement method are not good enough for clinical use. The present research proposes a metric of the human body’s standing balance ability based on the multivariate largest Lyapunov exponent which can quantify the human standing balance. The dynamic multivariate time series of ankle, knee, and hip were measured by multiple electrical goniometers. Thirty-six normal people of different ages participated in the test. With acquired data, the multivariate largest Lyapunov exponent was calculated. Finally, the results of the proposed approach were analysed and compared with the traditional method, for which the largest Lyapunov exponent and power spectral density from the centre of pressure were also calculated. The following conclusions can be obtained. The multivariate largest Lyapunov exponent has a higher degree of differentiation in differentiating balance in eyes-closed conditions. The MLLE value reflects the overall coordination between multisegment movements. Individuals of different ages can be distinguished by their MLLE values. The standing stability of human is reduced with the increment of age.

Crash testing the largest experiment on Earth

OpenAIRE

Cauchi, Marija

2015-01-01

Under Europe lies a 27 km tunnel that is both the coldest and hottest place on Earth. The Large Hadron Collider (LHC) has already found out what gives mass to all the matter in the Universe. It is now trying to go even deeper into what makes up everything we see around us. Dr Marija Cauchi writes about her research that helped protect this atom smasher from itself. Photography by Jean Claude Vancell. http://www.um.edu.mt/think/crash-testing-the-largest-experiment-on-earth/

Stability of a giant connected component in a complex network

Science.gov (United States)

Kitsak, Maksim; Ganin, Alexander A.; Eisenberg, Daniel A.; Krapivsky, Pavel L.; Krioukov, Dmitri; Alderson, David L.; Linkov, Igor

2018-01-01

We analyze the stability of the network's giant connected component under impact of adverse events, which we model through the link percolation. Specifically, we quantify the extent to which the largest connected component of a network consists of the same nodes, regardless of the specific set of deactivated links. Our results are intuitive in the case of single-layered systems: the presence of large degree nodes in a single-layered network ensures both its robustness and stability. In contrast, we find that interdependent networks that are robust to adverse events have unstable connected components. Our results bring novel insights to the design of resilient network topologies and the reinforcement of existing networked systems.

Reliability Analysis of Fatigue Failure of Cast Components for Wind Turbines

OpenAIRE

Hesam Mirzaei Rafsanjani; John Dalsgaard Sørensen

2015-01-01

Fatigue failure is one of the main failure modes for wind turbine drivetrain components made of cast iron. The wind turbine drivetrain consists of a variety of heavily loaded components, like the main shaft, the main bearings, the gearbox and the generator. The failure of each component will lead to substantial economic losses such as cost of lost energy production and cost of repairs. During the design lifetime, the drivetrain components are exposed to variable loads from winds and waves an...

Electricity costs in liberalized market

International Nuclear Information System (INIS)

Barkans, J.; Junghans, G.

2006-01-01

In the liberalized electricity market the flexible demand determines the operation of power plants. Under market conditions the producers are forced to compete, and their power plants are normally loaded in order of increasing prices. The electricity costs consist of fixed and variable components, and the competition among producers simulates minimization of both the components. Considering the fixed costs (including maintenance, depreciation, capital costs and other permanent costs not depending on production) to be known, the total electricity costs in different operating conditions are based on the economic characteristics and the equipment load of a power plant. The paper describes the method for determination of electricity costs for condensing thermal power plants with permanent steam take-off for regeneration purposes and adjustable steam take-off for the needs of local heat energy consumers. The marginal costs for CHP plants are determined considering a number of different steam take-off from a turbine. At the electricity cost determination, auxiliary services also are taken into account. These can be reduced by adjusting the rotational speed of electric motors. The paper also shows how to determine the electricity costs for gas turbines, combined cycle gas turbines, and nuclear power plants. The position of hydro power plants among other PPs in the free market is also analysed. (authors)

Impact test of components

International Nuclear Information System (INIS)

Borsoi, L.; Buland, P.; Labbe, P.

1987-01-01

Stops with gaps are currently used to support components and piping: it is simple, low cost, efficient and permits free thermal expansion. In order to keep the nonlinear nature of stops, such design is often modeled by beam elements (for the component) and nonlinear springs (for the stops). This paper deals with the validity and the limits of these models through the comparison of computational and experimental results. The experimental results come from impact laboratory tests on a simplified mockup. (orig.)

Direct medical cost of influenza-related hospitalizations among severe acute respiratory infections cases in three provinces in China.

Directory of Open Access Journals (Sweden)

Lei Zhou

Full Text Available BACKGROUND: Influenza-related hospitalizations impose a considerable economic and social burden. This study aimed to better understand the economic burden of influenza-related hospitalizations among patients in China in different age and risk categories. METHODS: Laboratory-confirmed influenza-related hospitalizations between December 2009 and June 2011 from three hospitals participating in the Chinese Severe Acute Respiratory Infections (SARI sentinel surveillance system were included in this study. Hospital billing data were collected from each hospital's Hospital Information System (HIS and divided into five cost categories. Demographic and clinical information was collected from medical records. Mean (range and median (interquartile range [IQR] costs were calculated and compared among children (≤15 years, adults (16-64 years and elderly (≥65 years groups. Factors influencing cost were analyzed. RESULTS: A total of 106 laboratory-confirmed influenza-related hospitalizations were identified, 60% of which were children. The mean (range direct medical cost was $1,797 ($80-$27,545 for all hospitalizations, and the median (IQR direct medical cost was $231 ($164, $854 ($890, and $2,263 ($7,803 for children, adults, and elderly, respectively. Therapeutics and diagnostics were the two largest components of direct medical cost, comprising 57% and 23%, respectively. Cost of physician services was the lowest at less than 1%. CONCLUSION: Direct medical cost of influenza-related hospitalizations imposes a heavy burden on patients and their families in China. Further study is needed to provide more comprehensive evidence on the economic burden of influenza. Our study highlights the need to increase vaccination rate and develop targeted national preventive strategies.

Composing simulations using persistent software components

Energy Technology Data Exchange (ETDEWEB)

Holland, J.V.; Michelsen, R.E.; Powell, D.R.; Upton, S.C.; Thompson, D.R.

1999-03-01

The traditional process for developing large-scale simulations is cumbersome, time consuming, costly, and in some cases, inadequate. The topics of software components and component-based software engineering are being explored by software professionals in academic and industrial settings. A component is a well-delineated, relatively independent, and replaceable part of a software system that performs a specific function. Many researchers have addressed the potential to derive a component-based approach to simulations in general, and a few have focused on military simulations in particular. In a component-based approach, functional or logical blocks of the simulation entities are represented as coherent collections of components satisfying explicitly defined interface requirements. A simulation is a top-level aggregate comprised of a collection of components that interact with each other in the context of a simulated environment. A component may represent a simulation artifact, an agent, or any entity that can generated events affecting itself, other simulated entities, or the state of the system. The component-based approach promotes code reuse, contributes to reducing time spent validating or verifying models, and promises to reduce the cost of development while still delivering tailored simulations specific to analysis questions. The Integrated Virtual Environment for Simulation (IVES) is a composition-centered framework to achieve this potential. IVES is a Java implementation of simulation composition concepts developed at Los Alamos National Laboratory for use in several application domains. In this paper, its use in the military domain is demonstrated via the simulation of dismounted infantry in an urban environment.

Cost of illness for cholera in a high risk urban area in Bangladesh: an analysis from household perspective

Science.gov (United States)

2013-01-01

Background Cholera poses a substantial health burden to developing countries such as Bangladesh. In this study, the objective is to estimate the economic burden of cholera treatments incurred by households. The study was carried out in the context of a large vaccine trial in an urban area of Bangladesh. Methods The study used a combination of prospective and retrospective incidence-based cost analyses of cholera illness per episode per household. A total of 394 confirmed cholera hospitalized cases were identified and treated in the study area during June–October 2011. Households with cholera patients were interviewed within 15 days after discharge from hospitals or clinics. To estimate the total cost of cholera illness a structured questionnaire was used, which included questions on direct medical costs, non-medical costs, and the indirect costs of patients and caregivers. Results The average total household cost of treatment for an episode of cholera was US$30.40. Total direct and indirect costs constituted 24.6% (US$7.40) and 75.4% (US$23.00) of the average total cost, respectively. The cost for children under 5 years of age (US$21.50) was higher than that of children aged 5–14 years (US$17.50). The direct cost of treatment was similar for male and female patients, but the indirect cost was higher for males. Conclusion Our study suggests that by preventing one cholera episode (3 days on an average), we can avert a total cost of 2,278.50 BDT (US$30.40) per household. Among medical components, medicines are the largest cost driver. No clear socioeconomic gradient emerged from our study, but limited demographic patterns were observed in the cost of illness. By preventing cholera cases, large production losses can be reduced. PMID:24188717

A comparison of cost-based pricing rules for natural gas distribution utilities

International Nuclear Information System (INIS)

Klein, C.C.

1993-01-01

Partial-equilibrium social welfare deadweight losses under uniform Ramsey pricing, a cost allocation pricing method, and the actual average revenues by customer class for two natural gas distribution utilities are calculated and compared. Marginal cost estimates are derived from a multiple-output translog variable cost function and used, along with three sets of demand elasticities, to generate the Ramsey prices and welfare losses. The actual and cost-allocation prices are taken directly from rate case files. The largest social welfare losses are associated with the cost-allocation rule, as high as 10-25% of revenue, despite suggestions in the literature to the contrary. (Author)

Defining the Costs of an Outbreak of Karnal Bunt of Wheat

OpenAIRE

Brennan, John P.; Thorne, Fiona S.; Kelly, Paul W.; Murray, Gordon M.

2004-01-01

In determining the economic impact of a possible outbreak of the quarantinable wheat disease Karnal Bunt, an examination was made of the detailed components of the costs involved. The costs were classified as: (a) Direct costs (yield and quality losses); (b) Reaction costs (export bans, quality down-grading, seed industry costs); and (c) Control costs (quarantine zones, fungicides, spore destruction). The relative importance of each of these cost components is measured for a hypothetical outb...

Predicting Traffic Flow in Local Area Networks by the Largest Lyapunov Exponent

Directory of Open Access Journals (Sweden)

Yan Liu

2016-01-01

Full Text Available The dynamics of network traffic are complex and nonlinear, and chaotic behaviors and their prediction, which play an important role in local area networks (LANs, are studied in detail, using the largest Lyapunov exponent. With the introduction of phase space reconstruction based on the time sequence, the high-dimensional traffic is projected onto the low dimension reconstructed phase space, and a reduced dynamic system is obtained from the dynamic system viewpoint. Then, a numerical method for computing the largest Lyapunov exponent of the low-dimensional dynamic system is presented. Further, the longest predictable time, which is related to chaotic behaviors in the system, is studied using the largest Lyapunov exponent, and the Wolf method is used to predict the evolution of the traffic in a local area network by both Dot and Interval predictions, and a reliable result is obtained by the presented method. As the conclusion, the results show that the largest Lyapunov exponent can be used to describe the sensitivity of the trajectory in the reconstructed phase space to the initial values. Moreover, Dot Prediction can effectively predict the flow burst. The numerical simulation also shows that the presented method is feasible and efficient for predicting the complex dynamic behaviors in LAN traffic, especially for congestion and attack in networks, which are the main two complex phenomena behaving as chaos in networks.

The Effect of Price on Surgeons' Choice of Implants: A Randomized Controlled Survey

NARCIS (Netherlands)

Wasterlain, Amy S.; Melamed, Eitan; Bello, Ricardo; Karia, Raj; Capo, John T.; Adams, Julie; Vochteloo, A. J. H.; Powell, Andrew John; Marcus, Alexander; Andreas, Platz; Miller, Anna N.; Berner, A. B. Arne; Altintas, Burak; Sears, Benjamin W.; Calfee, Ryan P.; Ekholm, Carl; Fernandes, C. H.; Porcellini, Giuseppe; Jones, Clifford; Moreno-Serrano, Constanza L.; Manke, Chad; Crist, Brett D.; Haverkamp, Daniel; Hanel, Doug; Merchant, Milind; Rikli, Daniel A.; Shafi, Mohamed; Patiño, Juan M.; Duncan, Scott F.; Ballas, Efsthathios G.; Harvey, Edward; Walbeehm, E. T.; Schumer, Evan D.; Evans, Peter J.; Suarez, Fabio; Lopez-Gonzalez, Francisco; Seibert, Franz Josef; DeSilva, Gregory; Bayne, Grant J.; Guitton, T. G.; Nancollas, Michael; Lane, Lewis B.; Westly, Stephen K.; Villamizar, Harold Alonso; Pountos, Ippokratis; Hofmeister, Eric; Biert, Jan; Goslings, J. Carel; Bishop, Julius; Peters, R. W.

2017-01-01

Surgical costs are under scrutiny and surgeons are being held increasingly responsible for cost containment. In some instances, implants are the largest component of total procedure cost, yet previous studies reveal that surgeons' knowledge of implant prices is poor. Our study aims to (1) understand

Replaceable LMFBR core components

International Nuclear Information System (INIS)

Evans, E.A.; Cunningham, G.W.

1976-01-01

Much progress has been made in understanding material and component performance in the high temperature, fast neutron environment of the LMFBR. Current data have provided strong assurance that the initial core component lifetime objectives of FFTF and CRBR can be met. At the same time, this knowledge translates directly into the need for improved core designs that utilize improved materials and advanced fuels required to meet objectives of low doubling times and extended core component lifetimes. An industrial base for the manufacture of quality core components has been developed in the US, and all procurements for the first two core equivalents for FFTF will be completed this year. However, the problem of fabricating recycled plutonium while dramatically reducing fabrication costs, minimizing personnel exposure, and protecting public health and safety must be addressed

Increase the Performance of Companies in the Energy Sector by Implementing the Activity-Based Costing

OpenAIRE

Letitia-Maria Rof; Sorinel Capusneanu

2015-01-01

This article highlights the increasing performances as result of implementation stages of the ActivityBased Costing in the companies operating in the energy sector in Romania. There are presented some aspects of the usefulness of applying the Activity-Based Costing in the energy sector and the advantages it offers compared to traditional costing. There are also outlined the steps for applying the Activity-Based Costing and its implementation in the largest hydropower producer in Romania. The ...

18 CFR 367.51 - Components of construction.

Science.gov (United States)

2010-04-01

...) Insurance includes premiums paid or amounts provided or reserved as self-insurance for the protection... associated net book cost, less the appraised or salvage value at time of release from the job, must be... testing of service company property must constitute a component of construction costs. (b) [Reserved] ...

Incremental ALARA cost/benefit computer analysis

International Nuclear Information System (INIS)

Hamby, P.

1987-01-01

Commonwealth Edison Company has developed and is testing an enhanced Fortran Computer Program to be used for cost/benefit analysis of Radiation Reduction Projects at its six nuclear power facilities and Corporate Technical Support Groups. This paper describes a Macro-Diven IBM Mainframe Program comprised of two different types of analyses-an Abbreviated Program with fixed costs and base values, and an extended Engineering Version for a detailed, more through and time-consuming approach. The extended engineering version breaks radiation exposure costs down into two components-Health-Related Costs and Replacement Labor Costs. According to user input, the program automatically adjust these two cost components and applies the derivation to company economic analyses such as replacement power costs, carrying charges, debt interest, and capital investment cost. The results from one of more program runs using different parameters may be compared in order to determine the most appropriate ALARA dose reduction technique. Benefits of this particular cost / benefit analysis technique includes flexibility to accommodate a wide range of user data and pre-job preparation, as well as the use of proven and standardized company economic equations

Cost consideration in the clinical guidance documents of physician specialty societies in the United States.

Science.gov (United States)

Schwartz, Jennifer A T; Pearson, Steven D

2013-06-24

Despite increasing concerns regarding the cost of health care, the consideration of costs in the development of clinical guidance documents by physician specialty societies has received little analysis. To evaluate the approach to consideration of cost in publicly available clinical guidance documents and methodological statements produced between 2008 and 2012 by the 30 largest US physician specialty societies. Qualitative document review. Whether costs are considered in clinical guidance development, mechanism of cost consideration, and the way that cost issues were used in support of specific clinical practice recommendations. Methodological statements for clinical guidance documents indicated that 17 of 30 physician societies (57%) explicitly integrated costs, 4 (13%) implicitly considered costs, 3 (10%) intentionally excluded costs, and 6 (20%) made no mention. Of the 17 societies that explicitly integrated costs, 9 (53%) consistently used a formal system in which the strength of recommendation was influenced in part by costs, whereas 8 (47%) were inconsistent in their approach or failed to mention the exact mechanism for considering costs. Among the 138 specific recommendations in these guidance documents that included cost as part of the rationale, the most common form of recommendation (50 [36%]) encouraged the use of a specific medical service because of equal effectiveness and lower cost. Slightly more than half of the largest US physician societies explicitly consider costs in developing their clinical guidance documents; among these, approximately half use an explicit mechanism for integrating costs into the strength of recommendations. Many societies remain vague in their approach. Physician specialty societies should demonstrate greater transparency and rigor in their approach to cost consideration in documents meant to influence care decisions.

Cost effective tools for soil organic carbon monitoring

Science.gov (United States)

Shepherd, Keith; Aynekulu, Ermias

2013-04-01

There is increasing demand for data on soil properties at fine spatial resolution to support management and planning decisions. Measurement of soil organic carbon has attracted much interest because (i) soil organic carbon is widely cited as a useful indicator of soil condition and (ii) of the importance of soil carbon in the global carbon cycle and climate mitigation strategies. However in considering soil measurement designs there has been insufficient attention given to careful analysis of the specific decisions that the measurements are meant to support and on what measurements have high information value for decision-making. As a result, much measurement effort may be wasted or focused on the wrong variables. A cost-effective measurement is one that reduces risk in decisions and does not cost more than the societal returns to additional evidence. A key uncertainty in measuring soil carbon as a soil condition indicator is what constitutes a good or bad level of carbon on a given soil. A measure of soil organic carbon concentration may have limited value for informing management decisions without the additional information required to interpret it, and so expending further efforts on improving measurements to increase precision may then have no value to improving the decision. Measuring soil carbon stock changes for carbon trading purposes requires high levels of measurement precision but there is still large uncertainty on whether the costs of measurement exceed the benefits. Since the largest cost component in soil monitoring is often travel to the field and physically sampling soils, it is generally cost-effective to meet multiple objectives by analysing a number of properties on a soil sample. Diffuse reflectance infrared spectroscopy is playing a key role in allowing multiple soil properties to be determined rapidly and at low cost. The method provides estimation of multiple soil properties (e.g. soil carbon, texture and mineralogy) in one measurement

School Transportation Costs, Policies and Practices: A Review of Issues in New York and Selected States.

Science.gov (United States)

New York State Education Dept., Albany. Educational Research Services Unit.

To draw comparisons for assessing transportation costs and developing recommendations for legislative action in New York, this study compares school transportation policies and practices that may be related to differences in transportation costs in eight states having the largest public school enrollments for 1980. Data were obtained from existing…

Economic impacts of oil spills: Spill unit costs for tankers, pipelines, refineries, and offshore facilities

International Nuclear Information System (INIS)

1993-01-01

The impacts of oil spills -- ranging from the large, widely publicized Exxon Valdez tanker incident to smaller pipeline and refinery spills -- have been costly to both the oil industry and the public. For example, the estimated costs to Exxon of the Valdez tanker spill are on the order of $4 billion, including $2.8 billion (in 1993 dollars) for direct cleanup costs and $1.125 billion (in 1992 dollars) for settlement of damages claims caused by the spill. Application of contingent valuation costs and civil lawsuits pending in the State of Alaska could raise these costs appreciably. Even the costs of the much smaller 1991 oil spill at Texaco's refinery near Anacortes, Washington led to costs of $8 to 9 million. As a result, inexpensive waming, response and remediation technologies could lower oil spin costs, helping both the oil industry, the associated marine industries, and the environment. One means for reducing the impact and costs of oil spills is to undertake research and development on key aspects of the oil spill prevention, warming, and response and remediation systems. To target these funds to their best use, it is important to have sound data on the nature and size of spills, their likely occurrence and their unit costs. This information could then allow scarce R ampersand D dollars to be spent on areas and activities having the largest impact. This report is intended to provide the ''unit cost'' portion of this crucial information. The report examines the three key components of the US oil supply system, namely, tankers and barges; pipelines and refineries; and offshore production facilities. The specific purpose of the study was to establish the unit costs of oil spills. By manipulating this key information into a larger matrix that includes the size and frequency of occurrence of oil spills, it will be possible' to estimate the likely future impacts, costs, and sources of oil spills

Development of damage functions for high-rise building components

International Nuclear Information System (INIS)

Kustu, O.; Miller, D.D.; Brokken, S.T.

1982-10-01

The component approach for predicting the effects that ground motion from underground nuclear explosions will have on structures involves predicting the damage to each structural and nonstructural component of a building on the basis of the expected local deformation that most affects the damage to the component. This study was conducted to provide the basic data necessary to evaluate the component approach. Available published laboratory test data for various high-rise building components were collected. These data were analyzed statistically to determine damage threshold values and their variabilities, which in turn were used to derive component damage functions. The portion of construction costs attributable to various building components was determined statistically. This information was needed because component damage functions define damage as a percentage of the replacement values of the component, and, in order to calculate the overall building damage factor, the relative cost of each component must be estimated. The feasibility of the component approach to damage prediction is demonstrated. It is recommended that further experimental research directed towards developing an adequate data base of component damage thresholds for all significant building components should be encouraged. Parallel to this effort, detailed damage data from specific buildings damaged in earthquakes should be collected to verify the theoretical procedure

A dynamic predictive maintenance policy for complex multi-component systems

International Nuclear Information System (INIS)

Van Horenbeek, Adriaan; Pintelon, Liliane

2013-01-01

The use of prognostic methods in maintenance in order to predict remaining useful life is receiving more attention over the past years. The use of these techniques in maintenance decision making and optimization in multi-component systems is however a still underexplored area. The objective of this paper is to optimally plan maintenance for a multi-component system based on prognostic/predictive information while considering different component dependencies (i.e. economic, structural and stochastic dependence). Consequently, this paper presents a dynamic predictive maintenance policy for multi-component systems that minimizes the long-term mean maintenance cost per unit time. The proposed maintenance policy is a dynamic method as the maintenance schedule is updated when new information on the degradation and remaining useful life of components becomes available. The performance, regarding the objective of minimal long-term mean cost per unit time, of the developed dynamic predictive maintenance policy is compared to five other conventional maintenance policies, these are: block-based maintenance, age-based maintenance, age-based maintenance with grouping, inspection condition-based maintenance and continuous condition-based maintenance. The ability of the predictive maintenance policy to react to changing component deterioration and dependencies within a multi-component system is quantified and the results show significant cost savings

In search of low cost titanium: the Fray Farthing Chen (FFC) Cambridge process

CSIR Research Space (South Africa)

Oosthuizen, SJ

2010-10-01

Full Text Available delivering a sponge product, aimed at replacing Kroll sponge alone, does not have potential for large reduction in overall titanium cost. Significant cost savings can only be achieved by also reducing the large number of process steps required to process... the sponge to mill product, including sponge purification, comminution, electrode forming, Vacuum Arc Re-melting, Hot and cold rolling. Presently, economy of scale in the production of titanium dictates that it is most cost effective to cast the largest...

Marginal cost application in the power industry

International Nuclear Information System (INIS)

Twardy, L.; Rusak, H.

1994-01-01

Two kind of marginal costs, the short-run and the long-run, are defined. The former are applied in conditions when the load increase is not accompanied neither by the increase of the transmission capacity not the installed capacity while the latter assume new investments to expand the power system. The long-run marginal costs be used to forecast optimized development of the system. They contain two main components: the marginal costs of capacity and the marginal costs of energy. When the long-run marginal costs are calculated, each component is considered for particular voltage levels, seasons of the year, hours of the day - selected depending on the system reliability factor as well as on its load level. In the market economy countries the long-run marginal costs can be used for setting up the electric energy tariffs. (author). 7 refs, 11 figs

Lagisza, world's largest CFB boiler, begins commercial operation

Energy Technology Data Exchange (ETDEWEB)

Nuortimo, K. [Foster Wheeler, Varkaus (Finland)

2010-04-15

Early operating experience with the Lagisza circulating fluidised bed (CFB) boiler in Poland - the world's largest such boiler to date, and also the first one with supercritical steam conditions - has been positive. 3 figs., 4 tabs.

A parametric cost model for estimating operating and support costs of US Navy (non-nuclear) surface ships

OpenAIRE

Brandt, James M.

1999-01-01

Approved for public release; distribution is unlimited With few effective decision-making tools to assess the affordability of major weapon systems, management of total ownership costs is continually misunderstood. Cost analysis provides a quick and reliable assessment of affordability. Because there is no standardized method for calculating reliable estimates of operating and support (O&S) costs (the principal component of total ownership cost), this thesis formulates a parametric cost mo...

Potentials and costs of carbon dioxide mitigation in the world's buildings

International Nuclear Information System (INIS)

Urge-Vorsatz, Diana; Novikova, Aleksandra

2008-01-01

Buildings are responsible for over a third of global energy-related carbon dioxide (CO 2 ) emissions. A significant share of these emissions can be avoided cost effectively through improved energy efficiency, while providing the same or higher level of energy services. How large is this emission reduction potential globally and how much will it cost for society to unlock it? This paper provides answers to these questions, presenting the results of bottom-up research conducted for the Intergovernmental Panel on Climate Change (IPCC), based on the assessment of 80 country- or regional-level mitigation studies throughout the world. First, the paper analyses the findings of these studies in a common framework. Then, it aggregates their results into a global estimate of CO 2 mitigation potential. The paper concludes that by 2020 it is possible to cut cost effectively approximately 29% of buildings-related global CO 2 emissions, the largest among all sectors reported by the IPCC, representing a 3.2 GtCO 2 eq. reduction. Developing countries house the largest cost-effective potential with up to 52% of building-level emissions, whereas transition economies and industrialised countries have cost-effective potentials of up to 37% and 25%, respectively. Energy-efficient lighting was identified as the most attractive measure worldwide, in terms of both reduction potential and cost effectiveness. If this potential is realised, the building-related CO 2 emissions would stay constant over 2004-2030. These stabilisation levels (if achieved by all other sectors) would cancel about 3 o C temperature increase over the projected period of time

Temporal properties of seismicity and largest earthquakes in SE Carpathians

Directory of Open Access Journals (Sweden)

S. Byrdina

2006-01-01

Full Text Available In order to estimate the hazard rate distribution of the largest seismic events in Vrancea, South-Eastern Carpathians, we study temporal properties of historical and instrumental catalogues of seismicity. First, on the basis of Generalized Extreme Value theory we estimate the average return period of the largest events. Then, following Bak et al. (2002 and Corral (2005a, we study scaling properties of recurrence times between earthquakes in appropriate spatial volumes. We come to the conclusion that the seismicity is temporally clustered, and that the distribution of recurrence times is significantly different from a Poisson process even for times largely exceeding corresponding periods of foreshock and aftershock activity. Modeling the recurrence times by a gamma distributed variable, we finally estimate hazard rates with respect to the time elapsed from the last large earthquake.

Researchers propose single grade rule for evaluating hardwood pallet cants

Science.gov (United States)

Hal Mitchell; Marshall White; Philip Araman; Peter Hamner

2008-01-01

In "price taker" markets, successful businesses are the low cost producers, and pallet manufacturers are no exception. The single largest cost component of pallet manufacturing is raw material costs. Cants and lumber typically account for over 60% of operating costs. In the last three decades, cants have replaced lumber as the primary raw...

Construction Cost Growth for New Department of Energy Nuclear Facilities

Energy Technology Data Exchange (ETDEWEB)

Kubic, Jr., William L. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2014-05-25

Cost growth and construction delays are problems that plague many large construction projects including the construction of new Department of Energy (DOE) nuclear facilities. A study was conducted to evaluate cost growth of large DOE construction projects. The purpose of the study was to compile relevant data, consider the possible causes of cost growth, and recommend measures that could be used to avoid extreme cost growth in the future. Both large DOE and non-DOE construction projects were considered in this study. With the exception of Chemical and Metallurgical Research Building Replacement Project (CMRR) and the Mixed Oxide Fuel Fabrication Facility (MFFF), cost growth for DOE Nuclear facilities is comparable to the growth experienced in other mega construction projects. The largest increase in estimated cost was found to occur between early cost estimates and establishing the project baseline during detailed design. Once the project baseline was established, cost growth for DOE nuclear facilities was modest compared to non-DOE mega projects.

A novel method for producing low cost dynamometric wheels based on harmonic elimination techniques

Science.gov (United States)

Gutiérrez-López, María D.; García de Jalón, Javier; Cubillo, Adrián

2015-02-01

A method for producing low cost dynamometric wheels is presented in this paper. For carrying out this method, the metallic part of a commercial wheel is instrumented with strain gauges, which must be grouped in at least three circumferences and in equidistant radial lines. The strain signals of the same circumference are linearly combined to obtain at least two new signals that only depend on the tyre/road contact forces and moments. The influence of factors like the angle rotated by the wheel, the temperature or the centrifugal forces is eliminated in them by removing the continuous component and the largest possible number of harmonics, except the first or the second one, of the strain signals. The contact forces and moments are obtained from these new signals by solving two systems of linear equations with three unknowns each. This method is validated with some theoretical and experimental examples.

Identifying efficient dairy heifer producers using production costs and data envelopment analysis.

Science.gov (United States)

Heinrichs, A J; Jones, C M; Gray, S M; Heinrichs, P A; Cornelisse, S A; Goodling, R C

2013-01-01

During November and December 2011, data were collected from 44 dairy operations in 13 Pennsylvania counties. Researchers visited each farm to collect information regarding management practices and feeding, and costs for labor, health, bedding, and reproduction for replacement heifers from birth until first calving. Costs per heifer were broken up into 4 time periods: birth until weaning, weaning until 6 mo of age, 6 mo of age until breeding age, and heifers from breeding to calving. Milk production records for each herd were obtained from Dairy Herd Improvement. The average number of milking cows on farms in this study was 197.8 ± 280.1, with a range from 38 to 1,708. Total cost averaged $1,808.23 ± $338.62 from birth until freshening. Raising calves from birth to weaning cost $217.49 ± 86.21; raising heifers from weaning age through 6 mo of age cost $247.38 ± 78.89; raising heifers from 6 mo of age until breeding cost $607.02 ± 192.28; and total cost for bred heifers was $736.33 ± 162.86. Feed costs were the largest component of the cost to raise heifers from birth to calving, accounting for nearly 73% of the total. Data envelopment analysis determined that 9 of the 44 farms had no inefficiencies in inputs or outputs. These farms best combined feed and labor investments, spending, on average, $1,137.40 and $140.62/heifer for feed and labor. These heifers calved at 23.7 mo of age and produced 88.42% of the milk produced by older cows. In contrast, the 35 inefficient farms spent $227 more on feed and $78 more on labor per heifer for animals that calved 1.6 mo later and produced only 82% of the milk made by their mature herdmates. Efficiency was attained by herds with the lowest input costs, but herds with higher input costs were also able to be efficient if age at calving was low and milk production was high for heifers compared with the rest of the herd. Copyright © 2013 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Nuclear plant life cycle costs

International Nuclear Information System (INIS)

Durante, R.W.

1994-01-01

Life cycle costs of nuclear power plants in the United States are discussed. The author argues that these costs have been mishandled or neglected. Decommissioning costs have escalated, e.g. from $328 per unit in 1991 to $370 in 1993 for the Sacramento Municipal Utility District, though they still only amount to less than 0.1 cent per kWh. Waste management has been complicated in the U.S. by the decision to abandon civilian reprocessing; by the year 2000, roughly 30 U.S. nuclear power units will have filled their storage pools; dry storage has been delayed, and will be an expense not originally envisaged. Some examples of costs of major component replacement are provided. No single component has caused as much operational disruption and financial penalties as the steam generator. Operation and maintenance costs have increased steadily, and now amount to more than 70% of production costs. A strategic plan by the Nuclear Power Oversight Committee (of U.S. utilities) will ensure that the ability to correctly operate and maintain a nuclear power plant is built into the original design. 6 figs

Cost efficiency of the non-associative flow rule simulation of an industrial component

Science.gov (United States)

Galdos, Lander; de Argandoña, Eneko Saenz; Mendiguren, Joseba

2017-10-01

In the last decade, metal forming industry is becoming more and more competitive. In this context, the FEM modeling has become a primary tool of information for the component and process design. Numerous researchers have been focused on improving the accuracy of the material models implemented on the FEM in order to improve the efficiency of the simulations. Aimed at increasing the efficiency of the anisotropic behavior modelling, in the last years the use of non-associative flow rule models (NAFR) has been presented as an alternative to the classic associative flow rule models (AFR). In this work, the cost efficiency of the used flow rule model has been numerically analyzed by simulating an industrial drawing operation with two different models of the same degree of flexibility: one AFR model and one NAFR model. From the present study, it has been concluded that the flow rule has a negligible influence on the final drawing prediction; this is mainly driven by the model parameter identification procedure. Even though the NAFR formulation is complex when compared to the AFR, the present study shows that the total simulation time while using explicit FE solvers has been reduced without loss of accuracy. Furthermore, NAFR formulations have an advantage over AFR formulations in parameter identification because the formulation decouples the yield stress and the Lankford coefficients.

US nuclear industry plans squeeze on O and M costs

International Nuclear Information System (INIS)

Anon.

1994-01-01

The United States nuclear industry, still the largest in the world with 107 operating commercial plants, wants to squeeze still more fat out of operation and maintenance costs. Success or failure could decide whether many operating units remain competitive with other forms of baseload electricity generation over the coming decade. (Author)

PNNL supercomputer to become largest computing resource on the Grid

CERN Multimedia

2002-01-01

Hewlett Packard announced that the US DOE Pacific Northwest National Laboratory will connect a 9.3-teraflop HP supercomputer to the DOE Science Grid. This will be the largest supercomputer attached to a computer grid anywhere in the world (1 page).

Worlds largest particle physics laboratory selects Proxim Wireless Mesh

CERN Multimedia

2007-01-01

"Proxim Wireless has announced that the European Organization for Nuclear Research (CERN), the world's largest particle physics laboratory and the birthplace of the World Wide Web, is using it's ORiNOCO AP-4000 mesh access points to extend the range of the laboratory's Wi-Fi network and to provide continuous monitoring of the lab's calorimeters" (1/2 page)

A comment on the cost of capital for investments with non-homogeneous components

OpenAIRE

Navas, Jorge; Marín Solano, Jesús

2006-01-01

In this paper, the expression for the cost of capital is derived when net and replacement investments exhibit differences in their effective prices due to a different fiscal treatment. It is shown that, contrary to previous results in the literature, the cost of capital should be constructed under an opportunity cost criterion rather than a historical one. This result has some important economic consequences, since the optimizing firm will take into account not only the effective price for th...

Discovery of the largest orbweaving spider species: the evolution of gigantism in Nephila.

Science.gov (United States)

Kuntner, Matjaz; Coddington, Jonathan A

2009-10-21

More than 41,000 spider species are known with about 400-500 added each year, but for some well-known groups, such as the giant golden orbweavers, Nephila, the last valid described species dates from the 19(th) century. Nephila are renowned for being the largest web-spinning spiders, making the largest orb webs, and are model organisms for the study of extreme sexual size dimorphism (SSD) and sexual biology. Here, we report on the discovery of a new, giant Nephila species from Africa and Madagascar, and review size evolution and SSD in Nephilidae. We formally describe N. komaci sp. nov., the largest web spinning species known, and place the species in phylogenetic context to reconstruct the evolution of mean size (via squared change parsimony). We then test female and male mean size correlation using phylogenetically independent contrasts, and simulate nephilid body size evolution using Monte Carlo statistics. Nephila females increased in size almost monotonically to establish a mostly African clade of true giants. In contrast, Nephila male size is effectively decoupled and hovers around values roughly one fifth of female size. Although N. komaci females are the largest Nephila yet discovered, the males are also large and thus their SSD is not exceptional.

Discovery of the largest orbweaving spider species: the evolution of gigantism in Nephila.

Directory of Open Access Journals (Sweden)

Matjaz Kuntner

2009-10-01

Full Text Available More than 41,000 spider species are known with about 400-500 added each year, but for some well-known groups, such as the giant golden orbweavers, Nephila, the last valid described species dates from the 19(th century. Nephila are renowned for being the largest web-spinning spiders, making the largest orb webs, and are model organisms for the study of extreme sexual size dimorphism (SSD and sexual biology. Here, we report on the discovery of a new, giant Nephila species from Africa and Madagascar, and review size evolution and SSD in Nephilidae.We formally describe N. komaci sp. nov., the largest web spinning species known, and place the species in phylogenetic context to reconstruct the evolution of mean size (via squared change parsimony. We then test female and male mean size correlation using phylogenetically independent contrasts, and simulate nephilid body size evolution using Monte Carlo statistics.Nephila females increased in size almost monotonically to establish a mostly African clade of true giants. In contrast, Nephila male size is effectively decoupled and hovers around values roughly one fifth of female size. Although N. komaci females are the largest Nephila yet discovered, the males are also large and thus their SSD is not exceptional.

On the statistics of the largest geomagnetic storms per solar cycle

International Nuclear Information System (INIS)

Siscoe, G.L.

1976-01-01

The theory of extreme value statistics is applied to the first, second, and third largest geomagnetic storms in nine solar cycles measured by the average half-daily aa indices compiled by Mayaud. Analytic expressions giving the probability of the extremes per solar cycle as a contour function of storm magnitude are obtained by least squares fitting of the observations to the appropriate theoretical extreme value probability functions. The results are used to obtain the statistical characteristics (mode, median, mean, and standard deviation) for the extreme values. The results are applied to find the expected range of extreme values in a set as a function of the number of solar cycles in the set. We find that the expected range of the largest storm is quite narrow and is larger for the second and third largest storms. The observed range of the extreme half-daily aa index for the nine solar cycles is 354--546 γ. In a set of 100 cycles the range is expanded esentially to 311--680γ, an increase of only 39% in the range. The result supports the argument for a change in solar cycle statistics in the latter part of the Seventeenth Century (the Maunder minimum)

Review of manufacturing processes for fabrication of SOFC components

International Nuclear Information System (INIS)

Stacey, B.; Badwal, S.P.S.; Foger, K.

1998-01-01

In order for fuel cell technology to be commercial, it must meet stringent criteria of reliability, life-time expectations and cost. While materials play an important role in determining these parameters, engineering design and manufacturing processes for fuel cell stack components are equally important. Manufacturing processes must be low cost and suitable for large volume production for the technology to be viable and competitive in the market place. Several processes suitable for the production of ceramic components used in solid oxide fuel cells as well as ceramic coating techniques required for the protection of some metal components have been described. Copyright (1998) Australasian Ceramic Society

Overview of SDCM - The Spacecraft Design and Cost Model

Science.gov (United States)

Ferebee, Melvin J.; Farmer, Jeffery T.; Andersen, Gregory C.; Flamm, Jeffery D.; Badi, Deborah M.

1988-01-01

The Spacecraft Design and Cost Model (SDCM) is a computer-aided design and analysis tool for synthesizing spacecraft configurations, integrating their subsystems, and generating information concerning on-orbit servicing and costs. SDCM uses a bottom-up method in which the cost and performance parameters for subsystem components are first calculated; the model then sums the contributions from individual components in order to obtain an estimate of sizes and costs for each candidate configuration within a selected spacecraft system. An optimum spacraft configuration can then be selected.

Impacts of optimum cost effective energy efficiency standards

International Nuclear Information System (INIS)

Brancic, A.B.; Peters, J.S.; Arch, M.

1991-01-01

Building Codes are increasingly required to be responsive to social and economic policy concerns. In 1990 the State of Connecticut passes An Act Concerning Global Warming, Public Act 90-219, which mandates the revision of the state building code to require that buildings and building elements be designed to provide optimum cost-effective energy efficiency over the useful life of the building. Further, such revision must meet the American Society of Heating, Refrigerating and Air Conditioning Engineers (ASHRAE) Standard 90.1 - 1989. As the largest electric energy supplier in Connecticut, Northeast Utilities (NU) sponsored a pilot study of the cost effectiveness of alternative building code standards for commercial construction. This paper reports on this study which analyzed design and construction means, building elements, incremental construction costs, and energy savings to determine the optimum cost-effective building code standard. Findings are that ASHRAE 90.1 results in 21% energy savings and alternative standards above it result in significant additional savings. Benefit/cost analysis showed that both are cost effective

Passive Microwave Components and Antennas

DEFF Research Database (Denmark)

State-of-the-art microwave systems always require higher performance and lower cost microwave components. Constantly growing demands and performance requirements of industrial and scientific applications often make employing traditionally designed components impractical. For that reason, the design...... and development process remains a great challenge today. This problem motivated intensive research efforts in microwave design and technology, which is responsible for a great number of recently appeared alternative approaches to analysis and design of microwave components and antennas. This book highlights...... techniques. Modelling and computations in electromagnetics is a quite fast-growing research area. The recent interest in this field is caused by the increased demand for designing complex microwave components, modeling electromagnetic materials, and rapid increase in computational power for calculation...

Cost of supplying energy from New Zealand resources

Energy Technology Data Exchange (ETDEWEB)

Norman, Robert G.

1977-10-15

The kinds of costs which face the community when a power project is promoted are broadly discussed. Sometimes, costs such as social, economic, and environmental impacts do not appear often in budgetary form. The growth of public participation is discussed. Components (investigation costs, development costs, distribution costs, social costs, environmental costs, etc.) which contribute to the cost of energy production and supply are examined in some detail.

Reducing the Cost of Grid Extension for Rural Electrification

OpenAIRE

NRECA International, Ltd.

2000-01-01

This study first reviews the cost of grid extension in a number of countries. It then identifies ways to reduce costs by examining how they are affected by a variety of factors. An electricity supply system may be divided into two discrete components: the grid extension and the low-voltage distribution system. This study will focus on the first of these two components, the cost of grid ext...

Revisiting the phylogeny of Ocellularieae, the second largest tribe within Graphidaceae (lichenized Ascomycota: Ostropales)

Science.gov (United States)

Ekaphan Kraichak; Sittiporn Parnmen; Robert Lücking; Eimy Rivas Plata; Andre Aptroot; Marcela E.S. Caceres; Damien Ertz; Armin Mangold; Joel A. Mercado-Diaz; Khwanruan Papong; Dries Van der Broeck; Gothamie Weerakoon; H. Thorsten. Lumbsch; NO-VALUE

2014-01-01

We present an updated 3-locus molecular phylogeny of tribe Ocellularieae, the second largest tribe within subfamily Graphidoideae in the Graphidaceae. Adding 165 newly generated sequences from the mitochondrial small subunit rDNA (mtSSU), the nuclear large subunit rDNA (nuLSU), and the second largest subunit of the DNA-directed RNA polymerase II (RPB2), we currently...

The magnitude, share and determinants of unpaid care costs for home-based palliative care service provision in Toronto, Canada.

Science.gov (United States)

Chai, Huamin; Guerriere, Denise N; Zagorski, Brandon; Coyte, Peter C

2014-01-01

With increasing emphasis on the provision of home-based palliative care in Canada, economic evaluation is warranted, given its tremendous demands on family caregivers. Despite this, very little is known about the economic outcomes associated with home-based unpaid care-giving at the end of life. The aims of this study were to (i) assess the magnitude and share of unpaid care costs in total healthcare costs for home-based palliative care patients, from a societal perspective and (ii) examine the sociodemographic and clinical factors that account for variations in this share. One hundred and sixty-nine caregivers of patients with a malignant neoplasm were interviewed from time of referral to a home-based palliative care programme provided by the Temmy Latner Centre for Palliative Care at Mount Sinai Hospital, Toronto, Canada, until death. Information regarding palliative care resource utilisation and costs, time devoted to care-giving and sociodemographic and clinical characteristics was collected between July 2005 and September 2007. Over the last 12 months of life, the average monthly cost was $14 924 (2011 CDN$) per patient. Unpaid care-giving costs were the largest component - $11 334, accounting for 77% of total palliative care expenses, followed by public costs ($3211; 21%) and out-of-pocket expenditures ($379; 2%). In all cost categories, monthly costs increased exponentially with proximity to death. Seemingly unrelated regression estimation suggested that the share of unpaid care costs of total costs was driven by patients' and caregivers' sociodemographic characteristics. Results suggest that overwhelming the proportion of palliative care costs is unpaid care-giving. This share of costs requires urgent attention to identify interventions aimed at alleviating the heavy financial burden and to ultimately ensure the viability of home-based palliative care in future. © 2013 John Wiley & Sons Ltd.

Product costing practices in the North American hardwood component industry

Science.gov (United States)

Adrienn Andersch; Urs Buehlmann; Jan Wiedenbeck; Steve Lawser

2011-01-01

Companies, when bidding for jobs, need to be able to price products competitively while also assuring that the necessary profitability can be achieved. These goals, competitive pricing and profitability, cannot be reliably achieved unless industry participants possess a full understanding of their company's cost structure. Competitors blame companies without...

Cost-Reduction Roadmap for Residential Solar Photovoltaics (PV), 2017-2030

Energy Technology Data Exchange (ETDEWEB)

Cook, Jeffrey J. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Ardani, Kristen B. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Margolis, Robert M. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Fu, Ran [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2018-01-03

The installed cost of solar photovoltaics (PV) has fallen rapidly in recent years and is expected to continue declining in the future. In this report, we focus on the potential for continued PV cost reductions in the residential market. From 2010 to 2017, the levelized cost of energy (LCOE) for residential PV declined from 52 cents per kilowatt-hour (cents/kWh) to 16 cents/kWh (Fu et al. 2017). The U.S. Department of Energy's (DOE's) Solar Energy Technologies Office (SETO) recently set new LCOE targets for 2030, including a target of 5 cents/kWh for residential PV. We present a roadmap for achieving the SETO 2030 residential PV target. Because the 2030 target likely will not be achieved under business-as-usual trends (NREL 2017), we examine two key market segments that demonstrate significant opportunities for cost savings and market growth: installing PV at the time of roof replacement and installing PV as part of the new home construction process. Within both market segments, we identify four key cost-reduction opportunities: market maturation, business model integration, product innovation, and economies of scale. To assess the potential impact of these cost reductions, we compare modeled residential PV system prices in 2030 to the National Renewable Energy Laboratory's (NREL's) quarter one 2017 (Q1 2017) residential PV system price benchmark (Fu et al. 2017). We use a bottom-up accounting framework to model all component and project-development costs incurred when installing a PV system. The result is a granular accounting for 11 direct and indirect costs associated with installing a residential PV system in 2030. All four modeled pathways demonstrate significant installed-system price savings over the Q1 2017 benchmark, with the visionary pathways yielding the greatest price benefits. The largest modeled cost savings are in the supply chain, sales and marketing, overhead, and installation labor cost categories. When we translate these

Lifecycle Prognostics Architecture for Selected High-Cost Active Components

Energy Technology Data Exchange (ETDEWEB)

N. Lybeck; B. Pham; M. Tawfik; J. B. Coble; R. M. Meyer; P. Ramuhalli; L. J. Bond

2011-08-01

There are an extensive body of knowledge and some commercial products available for calculating prognostics, remaining useful life, and damage index parameters. The application of these technologies within the nuclear power community is still in its infancy. Online monitoring and condition-based maintenance is seeing increasing acceptance and deployment, and these activities provide the technological bases for expanding to add predictive/prognostics capabilities. In looking to deploy prognostics there are three key aspects of systems that are presented and discussed: (1) component/system/structure selection, (2) prognostic algorithms, and (3) prognostics architectures. Criteria are presented for component selection: feasibility, failure probability, consequences of failure, and benefits of the prognostics and health management (PHM) system. The basis and methods commonly used for prognostics algorithms are reviewed and summarized. Criteria for evaluating PHM architectures are presented: open, modular architecture; platform independence; graphical user interface for system development and/or results viewing; web enabled tools; scalability; and standards compatibility. Thirteen software products were identified and discussed in the context of being potentially useful for deployment in a PHM program applied to systems in a nuclear power plant (NPP). These products were evaluated by using information available from company websites, product brochures, fact sheets, scholarly publications, and direct communication with vendors. The thirteen products were classified into four groups of software: (1) research tools, (2) PHM system development tools, (3) deployable architectures, and (4) peripheral tools. Eight software tools fell into the deployable architectures category. Of those eight, only two employ all six modules of a full PHM system. Five systems did not offer prognostic estimates, and one system employed the full health monitoring suite but lacked operations and

Lifecycle Prognostics Architecture for Selected High-Cost Active Components

International Nuclear Information System (INIS)

Lybeck, N.; Pham, B.; Tawfik, M.; Coble, J.B.; Meyer, R.M.; Ramuhalli, P.; Bond, L.J.

2011-01-01

There are an extensive body of knowledge and some commercial products available for calculating prognostics, remaining useful life, and damage index parameters. The application of these technologies within the nuclear power community is still in its infancy. Online monitoring and condition-based maintenance is seeing increasing acceptance and deployment, and these activities provide the technological bases for expanding to add predictive/prognostics capabilities. In looking to deploy prognostics there are three key aspects of systems that are presented and discussed: (1) component/system/structure selection, (2) prognostic algorithms, and (3) prognostics architectures. Criteria are presented for component selection: feasibility, failure probability, consequences of failure, and benefits of the prognostics and health management (PHM) system. The basis and methods commonly used for prognostics algorithms are reviewed and summarized. Criteria for evaluating PHM architectures are presented: open, modular architecture; platform independence; graphical user interface for system development and/or results viewing; web enabled tools; scalability; and standards compatibility. Thirteen software products were identified and discussed in the context of being potentially useful for deployment in a PHM program applied to systems in a nuclear power plant (NPP). These products were evaluated by using information available from company websites, product brochures, fact sheets, scholarly publications, and direct communication with vendors. The thirteen products were classified into four groups of software: (1) research tools, (2) PHM system development tools, (3) deployable architectures, and (4) peripheral tools. Eight software tools fell into the deployable architectures category. Of those eight, only two employ all six modules of a full PHM system. Five systems did not offer prognostic estimates, and one system employed the full health monitoring suite but lacked operations and

Moche CAPE Formula: Cost Analysis of Public Education.

Science.gov (United States)

Moche, Joanne Spiers

The Moche Cost Analysis of Public Education (CAPE) formula was developed to identify total and per pupil costs of regular elementary education, regular secondary education, elementary special education, and secondary special education. Costs are analyzed across five components: (1) comprehensive costs (including transportation and supplemental…

Mapping Biomass for REDD in the Largest Forest of Central Africa: the Democratic Republic of Congo

Science.gov (United States)

Shapiro, Aurelie; Saatchi, Sassan

2014-05-01

With the support of the International Climate Initiative (ICI) of the Federal Ministry of the Environment, Conservation, and Nuclear Security, the implementation of the German Development Bank KfW, the World Wide Fund for Nature (WWF) Germany, the University of California Los Angeles (UCLA) and local DRC partners will produce a national scale biomass map for the entire forest coverage of the Democratic Republic of Congo (DRC) along with feasibility assessments of different forest protection measures within a framework of a REDD+ model project. The « Carbon Map and Model (CO2M&M) » project will produce a national forest biomass map for the DRC, which will enable quantitative assessments of carbon stocks and emissions in the largest forest of the Congo Basin. This effort will support the national REDD (Reducing Emissions from Deforestation and Degradation) program in DRC, which plays a major role in sustainable development and poverty alleviation. This map will be developed from field data, complemented by airborne LiDAR (Light Detection and Ranging) and aerial photos, systematically sampled throughout the forests of the DRC and up-scaled to satellite images to accurately estimate carbon content in all forested areas. The second component of the project is to develop specific approaches for model REDD projects in key landscapes. This project represents the largest LiDAR-derived mapping effort in Africa, under unprecedented logistical constraints, which will provide one of the poorest nations in the world with the richest airborne and satellites derived datasets for analyzing forest structure, biomass and biodiversity.

Cost-price estimation of clinical laboratory services based on activity-based costing: A case study from a developing country.

Science.gov (United States)

Mouseli, Ali; Barouni, Mohsen; Amiresmaili, Mohammadreza; Samiee, Siamak Mirab; Vali, Leila

2017-04-01

It is believed that laboratory tariffs in Iran don't reflect the real costs. This might expose private laboratories at financial hardship. Activity Based Costing is widely used as a cost measurement instrument to more closely approximate the true cost of operations. This study aimed to determine the real price of different clinical tests of a selected private clinical laboratory. This study was a cross sectional study carried out in 2015. The study setting was the private laboratories in the city of Kerman, Iran. Of 629 tests in the tariff book of the laboratory (relative value), 188 tests were conducted in the laboratory that used Activity Based Costing (ABC) methodology to estimate cost-price. Analyzing and cost-price estimating of laboratory services were performed by MY ABCM software Version 5.0. In 2015, the total costs were $641,645. Direct and indirect costs were 78.3% and 21.7% respectively. Laboratory consumable costs by 37% and personnel costs by 36.3% had the largest share of the costing. Also, group of hormone tests cost the most $147,741 (23.03%), and other tests group cost the least $3,611 (0.56%). Also after calculating the cost of laboratory services, a comparison was made between the calculated price and the private sector's tariffs in 2015. This study showed that there was a difference between costs and tariffs in the private laboratory. One way to overcome this problem is to increase the number of laboratory tests with regard to capacity of the laboratories.

Next generation grinding spindle for cost-effective manufacture of advanced ceramic components

Energy Technology Data Exchange (ETDEWEB)

Kovach, J.A.; Laurich, M.A.

2000-01-01

Finish grinding of advanced structural ceramics has generally been considered an extremely slow and costly process. Recently, however, results from the High-Speed, Low-Damage (HSLD) program have clearly demonstrated that numerous finish-process performance benefits can be realized by grinding silicon nitride at high wheel speeds. A new, single-step, roughing-process capable of producing high-quality silicon nitride parts at high material removal rates while dramatically reducing finishing costs has been developed.

Alliancing process helps BP control Prudhoe Bay costs

International Nuclear Information System (INIS)

Darley, J.R.

1992-01-01

Production and revenues from America's largest oil field are declining. The cost of operating it is rising. If both trends were to continue unchecked, oil production at Prudhoe Bay on Alaska's North Slope could become uneconomic in the next decade. Simply maintaining operating expenditures at current levels - barring a dramatic, lasting increase in oil prices - would postpone the day of reckoning by only a few years. Despite ongoing investments in tempering the decline - gas and water handling expansions, development drilling, enhanced oil recovery, and well maintenance and repair programs - production will continue to decline. That's why it's imperative we reverse the tide of rising costs. This paper reports that to continue to produce oil at Prudhoe well into the 21st century, we must immediately - and continually - cut costs to reflect declining production and revenues

What factors increase the risk of incurring high market impact costs?

NARCIS (Netherlands)

Bikker, Jacob A.; Spierdijk, Laura; van der Sluis, Pieter-Jelle

2010-01-01

This article applies quantile regression to assess the factors that influence the risk of incurring high trading costs. Using data on the equity trades of the world's second largest pension fund in the first quarter of 2002, we show that trade timing, momentum, volatility and the type of broker

Ventilation cost and air cleaning

Science.gov (United States)

Goodfellow, H. D.

The components associated with the costs of the purchase of pollution control equipment are discussed. These include the capital cost to purchase the equipment and installation, and the costs incurred to operate the control device on an annual basis. Although the capital costs can represent a significant outlay of money, typically these costs are spread out over the life of the equipment. In general, this amortized cost is combined with the operating cost and is referred to as an 'annualized cost'. The annualized cost is a commonly used indicator to demonstrate the actual year to year cost that the equipment and operation will represent. Values and methods used to estimate costs, typical cost indicators, and sources of computerized costing models are presented. A comparison of the capital cost expenditure required for a model case (a cement kiln operation), using three control device alternatives is made.

Relativistic four-component multiconfigurational self-consistent-field theory for molecules

DEFF Research Database (Denmark)

Jensen, Hans Jørgen Aa; Dyall, Kenneth G.; Saue, Trond

1996-01-01

A formalism for relativistic four-component multiconfigurational self-consistent-field calculations on molecules is presented. The formalism parallels a direct second-order restricted-step algorithm developed for nonrelativistic molecular calculations. The presentation here focuses on the differe......A formalism for relativistic four-component multiconfigurational self-consistent-field calculations on molecules is presented. The formalism parallels a direct second-order restricted-step algorithm developed for nonrelativistic molecular calculations. The presentation here focuses...... the memory used by the largest nonrelativistic calculation in the equivalent basis, due to the complex arithmetic. The feasibility of the calculations is then determined more by the disk space for storage of integrals and N-particle expansion vectors....

Near-Net Shape Fabrication Using Low-Cost Titanium Alloy Powders

Energy Technology Data Exchange (ETDEWEB)

Dr. David M. Bowden; Dr. William H. Peter

2012-03-31

The use of titanium in commercial aircraft production has risen steadily over the last half century. The aerospace industry currently accounts for 58% of the domestic titanium market. The Kroll process, which has been used for over 50 years to produce titanium metal from its mineral form, consumes large quantities of energy. And, methods used to convert the titanium sponge output of the Kroll process into useful mill products also require significant energy resources. These traditional approaches result in product forms that are very expensive, have long lead times of up to a year or more, and require costly operations to fabricate finished parts. Given the increasing role of titanium in commercial aircraft, new titanium technologies are needed to create a more sustainable manufacturing strategy that consumes less energy, requires less material, and significantly reduces material and fabrication costs. A number of emerging processes are under development which could lead to a breakthrough in extraction technology. Several of these processes produce titanium alloy powder as a product. The availability of low-cost titanium powders may in turn enable a more efficient approach to the manufacture of titanium components using powder metallurgical processing. The objective of this project was to define energy-efficient strategies for manufacturing large-scale titanium structures using these low-cost powders as the starting material. Strategies include approaches to powder consolidation to achieve fully dense mill products, and joining technologies such as friction and laser welding to combine those mill products into near net shape (NNS) preforms for machining. The near net shape approach reduces material and machining requirements providing for improved affordability of titanium structures. Energy and cost modeling was used to define those approaches that offer the largest energy savings together with the economic benefits needed to drive implementation. Technical

Ranking of risk significant components for the Davis-Besse Component Cooling Water System

International Nuclear Information System (INIS)

Seniuk, P.J.

1994-01-01

Utilities that run nuclear power plants are responsible for testing pumps and valves, as specified by the American Society of Mechanical Engineers (ASME) that are required for safe shutdown, mitigating the consequences of an accident, and maintaining the plant in a safe condition. These inservice components are tested according to ASME Codes, either the earlier requirements of the ASME Boiler and Pressure Vessel Code, Section XI, or the more recent requirements of the ASME Operation and Maintenance Code, Section IST. These codes dictate test techniques and frequencies regardless of the component failure rate or significance of failure consequences. A probabilistic risk assessment or probabilistic safety assessment may be used to evaluate the component importance for inservice test (IST) risk ranking, which is a combination of failure rate and failure consequences. Resources for component testing during the normal quarterly verification test or postmaintenance test are expensive. Normal quarterly testing may cause component unavailability. Outage testing may increase outage cost with no real benefit. This paper identifies the importance ranking of risk significant components in the Davis-Besse component cooling water system. Identifying the ranking of these risk significant IST components adds technical insight for developing the appropriate test technique and test frequency

Cost analysis of the development and implementation of a spatial decision support system for malaria elimination in Solomon Islands.

Science.gov (United States)

Marston, Luke; Kelly, Gerard C; Hale, Erick; Clements, Archie C A; Hodge, Andrew; Jimenez-Soto, Eliana

2014-08-18

The goal of malaria elimination faces numerous challenges. New tools are required to support the scale up of interventions and improve national malaria programme capacity to conduct detailed surveillance. This study investigates the cost factors influencing the development and implementation of a spatial decision support system (SDSS) for malaria elimination in the two elimination provinces of Isabel and Temotu, Solomon Islands. Financial and economic costs to develop and implement a SDSS were estimated using the Solomon Islands programme's financial records. Using an ingredients approach, verified by stakeholders and operational reports, total costs for each province were quantified. A budget impact sensitivity analysis was conducted to investigate the influence of variations in standard budgetary components on the costs and to identify potential cost savings. A total investment of US$ 96,046 (2012 constant dollars) was required to develop and implement the SDSS in two provinces (Temotu Province US$ 49,806 and Isabel Province US$ 46,240). The single largest expense category was for computerized equipment totalling approximately US$ 30,085. Geographical reconnaissance was the most expensive phase of development and implementation, accounting for approximately 62% of total costs. Sensitivity analysis identified different cost factors between the provinces. Reduced equipment costs would deliver a budget saving of approximately 10% in Isabel Province. Combined travel costs represented the greatest influence on the total budget in the more remote Temotu Province. This study provides the first cost analysis of an operational surveillance tool used specifically for malaria elimination in the South-West Pacific. It is demonstrated that the costs of such a decision support system are driven by specialized equipment and travel expenses. Such factors should be closely scrutinized in future programme budgets to ensure maximum efficiencies are gained and available resources

CERN, World's largest particle physics lab, selects Progress SonicMQ

CERN Document Server

2007-01-01

"Progress Software Corporation (NADAQ: PRGS), a global supplier of application insfrastructure software used to develop, deploy, integrate and manage business applications, today announced that CERN the world's largest physis laboratory and particle accelerator, has chosen Progress® SonicMQ® for mission-critical message delivery." (1 page)

Synchrotron Emission on the Largest Scales: Radio Detection of the ...

Indian Academy of Sciences (India)

Abstract. Shocks and turbulence generated during large-scale structure formation are predicted to produce large-scale, low surface-brightness synchrotron emission. On the largest scales, this emission is globally correlated with the thermal baryon distribution, and constitutes the 'syn- chrotron cosmic-web'. I present the ...

Distribution of the Largest Eigenvalues of the Levi-Smirnov Ensemble

International Nuclear Information System (INIS)

Wieczorek, W.

2004-01-01

We calculate the distribution of the k-th largest eigenvalue in the random matrix Levi - Smirnov Ensemble (LSE), using the spectral dualism between LSE and chiral Gaussian Unitary Ensemble (GUE). Then we reconstruct universal spectral oscillations and we investigate an asymptotic behavior of the spectral distribution. (author)

Probabilistic cost estimating of nuclear power plant construction projects

International Nuclear Information System (INIS)

Finch, W.C.; Perry, L.W.; Postula, F.D.

1978-01-01

This paper shows how to identify and isolate cost accounts by developing probability trees down to component levels as justified by value and cost uncertainty. Examples are given of the procedure for assessing uncertainty in all areas contributing to cost: design, factory equipment pricing, and field labor and materials. The method of combining these individual uncertainties is presented so that the cost risk can be developed for components, systems and the total plant construction project. Formats which enable management to use the probabilistic cost estimate information for business planning and risk control are illustrated. Topics considered include code estimate performance, cost allocation, uncertainty encoding, probabilistic cost distributions, and interpretation. Effective cost control of nuclear power plant construction projects requires insight into areas of greatest cost uncertainty and a knowledge of the factors which can cause costs to vary from the single value estimates. It is concluded that probabilistic cost estimating can provide the necessary assessment of uncertainties both as to the cause and the consequences

Capital costs of light water reactors: the USA

International Nuclear Information System (INIS)

MacKerron, G.

1979-10-01

The cost of building a modern nuclear power plant is greater than that of almost any other single civilian project - costs of individual plants are reckoned in hundreds of millions of pounds in the UK, and up to a billion dollars or more in the USA. Hence, depending on the size of nuclear programmes and their funding, escalation of nuclear capital costs may have important economic and social consequences through its effects on overall resource allocation. It is therefore important to analyse the extent and, as far as possible, the sources of cost increases and escalation, in order to see if the experience yields implications for technology policy. The USA has much the greatest experience in nuclear construction: it also has by far the largest amount of published information on the subject of capital costs. As all other countries lack either sufficient experience and/or adequate published cost information, it is impossible to conduct a genuine international comparison, and this paper is confined to an examination of US experience. This paper therefore assembles and evaluates currently available data on light water reactor (PWR and BWR) capital costs in the USA. (author)

Costs associated with wheeling

International Nuclear Information System (INIS)

Anon.

1991-01-01

Wheeling costs are incurred by all companies that experience a change in power flows over their transmission lines during a specific transaction, whether or not the lines of that company are part of the contract path. The costs of providing wheeling service differ from one system to another and from one kind of wheeling transaction to another. While most transactions may be completed using existing capacity, others may require an increase in line. Depending on the situation, some cost components may be high, low, negative, or not incurred at all. This article discusses two general categories of costs; transactional and capital. The former are all operation, maintenance and opportunity costs incurred in completing a specific transaction assuming the existence of adequate capacity. Capital costs are the costs of major new equipment purchases and lines necessary to provide any increased level of transmission services

Direct and indirect costs for adverse drug events identified in medical records across care levels, and their distribution among payers.

Science.gov (United States)

Natanaelsson, Jennie; Hakkarainen, Katja M; Hägg, Staffan; Andersson Sundell, Karolina; Petzold, Max; Rehnberg, Clas; Jönsson, Anna K; Gyllensten, Hanna

2017-11-01

Adverse drug events (ADEs) cause considerable costs in hospitals. However, little is known about costs caused by ADEs outside hospitals, effects on productivity, and how the costs are distributed among payers. To describe the direct and indirect costs caused by ADEs, and their distribution among payers. Furthermore, to describe the distribution of patient out-of-pocket costs and lost productivity caused by ADEs according to socio-economic characteristics. In a random sample of 5025 adults in a Swedish county, prevalence-based costs for ADEs were calculated. Two different methods were used: 1) based on resource use judged to be caused by ADEs, and 2) as costs attributable to ADEs by comparing costs among individuals with ADEs to costs among matched controls. Payers of costs caused by ADEs were identified in medical records among those with ADEs (n = 596), and costs caused to individual patients were described by socio-economic characteristics. Costs for resource use caused by ADEs were €505 per patient with ADEs (95% confidence interval €345-665), of which 38% were indirect costs. Compared to matched controls, the costs attributable to ADEs were €1631, of which €410 were indirect costs. The local health authorities paid 58% of the costs caused by ADEs. Women had higher productivity loss than men (€426 vs. €109, p = 0.018). Out-of-pocket costs displaced a larger proportion of the disposable income among low-income earners than higher income earners (0.7% vs. 0.2%-0.3%). We used two methods to identify costs for ADEs, both identifying indirect costs as an important component of the overall costs for ADEs. Although the largest payers of costs caused by ADEs were the local health authorities responsible for direct costs, employers and patients costs for lost productivity contributed substantially. Our results indicate inequalities in costs caused by ADEs, by sex and income. Copyright © 2016 Elsevier Inc. All rights reserved.

Can Additional Homeopathic Treatment Save Costs? A Retrospective Cost-Analysis Based on 44500 Insured Persons.

Directory of Open Access Journals (Sweden)

Julia K Ostermann

Full Text Available The aim of this study was to compare the health care costs for patients using additional homeopathic treatment (homeopathy group with the costs for those receiving usual care (control group.Cost data provided by a large German statutory health insurance company were retrospectively analysed from the societal perspective (primary outcome and from the statutory health insurance perspective. Patients in both groups were matched using a propensity score matching procedure based on socio-demographic variables as well as costs, number of hospital stays and sick leave days in the previous 12 months. Total cumulative costs over 18 months were compared between the groups with an analysis of covariance (adjusted for baseline costs across diagnoses and for six specific diagnoses (depression, migraine, allergic rhinitis, asthma, atopic dermatitis, and headache.Data from 44,550 patients (67.3% females were available for analysis. From the societal perspective, total costs after 18 months were higher in the homeopathy group (adj. mean: EUR 7,207.72 [95% CI 7,001.14-7,414.29] than in the control group (EUR 5,857.56 [5,650.98-6,064.13]; p<0.0001 with the largest differences between groups for productivity loss (homeopathy EUR 3,698.00 [3,586.48-3,809.53] vs. control EUR 3,092.84 [2,981.31-3,204.37] and outpatient care costs (homeopathy EUR 1,088.25 [1,073.90-1,102.59] vs. control EUR 867.87 [853.52-882.21]. Group differences decreased over time. For all diagnoses, costs were higher in the homeopathy group than in the control group, although this difference was not always statistically significant.Compared with usual care, additional homeopathic treatment was associated with significantly higher costs. These analyses did not confirm previously observed cost savings resulting from the use of homeopathy in the health care system.

Social costs of road crashes : an international analysis.

NARCIS (Netherlands)

Wijnen, W. & Stipdonk, H.L.

2016-01-01

This paper provides an international overview of the most recent estimates of the social costs of road crashes: total costs, value per casualty and breakdown in cost components. The analysis is based on publications about the national costs of road crashes of 17 countries, of which ten high income

What factors increase the risk of incurring high market impact costs?

NARCIS (Netherlands)

Bikker, Jacob A.; Spierdijk, L.; van der Sluis, Pieter Jelle

2010-01-01

This article applies quantile regression to assess the factors that influence the risk of incurring high trading costs. Using data on the equity trades of the world’s second largest pension fund in the first quarter of 2002, we show that trade timing, momentum, volatility and the type of broker

Longitudinal Associations between Triglycerides and Metabolic Syndrome Components in a Beijing Adult Population, 2007-2012.

Science.gov (United States)

Tao, Li-Xin; Yang, Kun; Liu, Xiang-Tong; Cao, Kai; Zhu, Hui-Ping; Luo, Yan-Xia; Guo, Jin; Wu, Li-Juan; Li, Xia; Guo, Xiu-Hua

2016-01-01

Longitudinal associations between triglycerides (TG) and other metabolic syndrome (MetS) components have rarely been reported. The purpose was to investigate the longitudinal association between TG and other MetS components with time. The longitudinal study was established in 2007 on individuals who attended health check-ups at Beijing Tongren Hospital and Beijing Xiaotangshan Hospital. Data used in this study was based on 7489 participants who had at least three health check-ups over a period of 5-year follow up. Joint model was used to explore longitudinal associations between TG and other MetS components after adjusted for age. There were positive correlations between TG and other MetS components except for high density lipoprotein (HDL), and the correlations increased with time. A negative correlation was displayed between TG and HDL, and the correlation also increased with time. Among all five pairs of TG and other MetS components, the marginal correlation between TG and body mass index (BMI) was the largest for both men and women. The marginal correlation between TG and fasting plasma glucose was the smallest for men, while the marginal correlation between TG and diastolic blood pressure was the smallest for women. The longitudinal association between TG and other MetS components increased with time. Among five pairs of TG and other MetS components, the longitudinal correlation between TG and BMI was the largest. It is important to closely monitor subjects with high levels of TG and BMI in health check-up population especially for women, because these two components are closely associated with development of hypertension, diabetes, cardiovascular disease and other metabolic diseases.

Sulphur guidelines cost $50 million

Energy Technology Data Exchange (ETDEWEB)

1974-01-21

Nearly all gas processing plants requiring remedial work on their sulfur recovery facilities have had applications filed for approval of new construction or modifications. Several jobs have been completed, but some of the largest have not received final approvals from the ERCB and the Alberta department of the environment. It is probable that toal capital expenditures for remedial work will be less than the original forecasts when the guide lines were proclaimed 3 yr ago. Several projects have been rolled in with plant expansions and installation of other new facilities. Even if a portion of these costs is attributed specifically to meeting sulfur guide lines, the total industry investment will probably not exceed $50 million. The principal item in this calculation is the $15 million project for Shell Canada Ltd. at its Waterton plant. This involves installation of a SCOT tail gas cleanup unit and related facilities, to be completed early in 1975. Among the operators of the 6 largest gas plants not meeting specifications in the top size category, Shell was the only one which elected not to apply for exemption.

A Systematic Review of Cost-Effectiveness Studies Reporting Cost-per-DALY Averted.

Directory of Open Access Journals (Sweden)

Peter J Neumann

Full Text Available Calculating the cost per disability-adjusted life years (DALYs averted associated with interventions is an increasing popular means of assessing the cost-effectiveness of strategies to improve population health. However, there has been no systematic attempt to characterize the literature and its evolution.We conducted a systematic review of cost-effectiveness studies reporting cost-per-DALY averted from 2000 through 2015. We developed the Global Health Cost-Effectiveness Analysis (GHCEA Registry, a repository of English-language cost-per-DALY averted studies indexed in PubMed. To identify candidate studies, we searched PubMed for articles with titles or abstracts containing the phrases "disability-adjusted" or "DALY". Two reviewers with training in health economics independently reviewed each article selected in our abstract review, gathering information using a standardized data collection form. We summarized descriptive characteristics on study methodology: e.g., intervention type, country of study, study funder, study perspective, along with methodological and reporting practices over two time periods: 2000-2009 and 2010-2015. We analyzed the types of costs included in analyses, the study quality on a scale from 1 (low to 7 (high, and examined the correlation between diseases researched and the burden of disease in different world regions.We identified 479 cost-per-DALY averted studies published from 2000 through 2015. Studies from Sub-Saharan Africa comprised the largest portion of published studies. The disease areas most commonly studied were communicable, maternal, neonatal, and nutritional disorders (67%, followed by non-communicable diseases (28%. A high proportion of studies evaluated primary prevention strategies (59%. Pharmaceutical interventions were commonly assessed (32% followed by immunizations (28%. Adherence to good practices for conducting and reporting cost-effectiveness analysis varied considerably. Studies mainly included

Discovery of the Largest Orbweaving Spider Species: The Evolution of Gigantism in Nephila

OpenAIRE

Kuntner, Matja?; Coddington, Jonathan A.

2009-01-01

Background More than 41,000 spider species are known with about 400?500 added each year, but for some well-known groups, such as the giant golden orbweavers, Nephila, the last valid described species dates from the 19th century. Nephila are renowned for being the largest web-spinning spiders, making the largest orb webs, and are model organisms for the study of extreme sexual size dimorphism (SSD) and sexual biology. Here, we report on the discovery of a new, giant Nephila species from Africa...

Alcohol-related hand injuries: an unnecessary social and economic cost.

OpenAIRE

Marston, R. A.

1992-01-01

Severe hand injuries constitute the largest number of acute referrals to this plastic surgery unit, the admission of these patients often displacing routine admissions due to bed shortages, thus increasing waiting list time. This study showed that a high percentage of these injuries were alcohol-related and were therefore preventable. The economic cost to the unit is discussed.

Reliability for systems of degrading components with distinct component shock sets

International Nuclear Information System (INIS)

Song, Sanling; Coit, David W.; Feng, Qianmei

2014-01-01

This paper studies reliability for multi-component systems subject to dependent competing risks of degradation wear and random shocks, with distinct shock sets. In practice, many systems are exposed to distinct and different types of shocks that can be categorized according to their sizes, function, affected components, etc. Previous research primarily focuses on simple systems with independent failure processes, systems with independent component time-to-failure, or components that share the same shock set or type of shocks. In our new model, we classify random shocks into different sets based on their sizes or function. Shocks with specific sizes or function can selectively affect one or more components in the system but not necessarily all components. Additionally the shocks from the different shock sets can arrive at different rates and have different relative magnitudes. Preventive maintenance (PM) optimization is conducted for the system with different component shock sets. Decision variables for two different maintenance scheduling problems, the PM replacement time interval, and the PM inspection time interval, are determined by minimizing a defined system cost rate. Sensitivity analysis is performed to provide insight into the behavior of the proposed maintenance policies. These models can be applied directly or customized for many complex systems that experience dependent competing failure processes with different component shock sets. A MEMS (Micro-electro mechanical systems) oscillator is a typical system subject to dependent and competing failure processes, and it is used as a numerical example to illustrate our new reliability and maintenance models

A proposed centralised distribution model for the South African automotive component industry

Directory of Open Access Journals (Sweden)

Micheline J. Naude

2009-12-01

Full Text Available Purpose: This article explores the possibility of developing a distribution model, similar to the model developed and implemented by the South African pharmaceutical industry, which could be implemented by automotive component manufacturers for supply to independent retailers. Problem Investigated: The South African automotive components distribution chain is extensive with a number of players of varying sizes, from the larger spares distribution groups to a number of independent retailers. Distributing to the smaller independent retailers is costly for the automotive component manufacturers. Methodology: This study is based on a preliminary study of an explorative nature. Interviews were conducted with a senior staff member from a leading automotive component manufacturer in KwaZulu Natal and nine participants at a senior management level at five of their main customers (aftermarket retailers. Findings: The findings from the empirical study suggest that the aftermarket component industry is mature with the role players well established. The distribution chain to the independent retailer is expensive in terms of transaction and distribution costs for the automotive component manufacturer. A proposed centralised distribution model for supply to independent retailers has been developed which should reduce distribution costs for the automotive component manufacturer in terms of (1 the lowest possible freight rate; (2 timely and controlled delivery; and (3 reduced congestion at the customer's receiving dock. Originality: This research is original in that it explores the possibility of implementing a centralised distribution model for independent retailers in the automotive component industry. Furthermore, there is a dearth of published research on the South African automotive component industry particularly addressing distribution issues. Conclusion: The distribution model as suggested is a practical one and should deliver added value to automotive

Cooling concepts for HTS components

International Nuclear Information System (INIS)

Binneberg, A.; Buschmann, H.; Neubert, J.

1993-01-01

HTS components require that low-cost, reliable cooling systems be used. There are no general solutions to such systems. Any cooling concept has to be tailored to the specific requirements of a system. The following has to he taken into consideration when designing cooling concepts: - cooling temperature - constancy and controllability of the cooling temperature - cooling load and refrigerating capacity - continuous or discontinuous mode - degree of automation - full serviceability or availability before evacuation -malfunctions caused by microphonic, thermal or electromagnetic effects -stationary or mobile application - investment and operating costs (orig.)

Direct, indirect and intangible costs of acute hand and wrist injuries: A systematic review.

Science.gov (United States)

Robinson, Luke Steven; Sarkies, Mitchell; Brown, Ted; O'Brien, Lisa

2016-12-01

Injuries sustained to the hand and wrist are common, accounting for 20% of all emergency presentations. The economic burden of these injuries, comprised of direct (medical expenses incurred), indirect (value of lost productivity) and intangible costs, can be extensive and rise sharply with the increase of severity. This paper systematically reviews cost-of-illness studies and health economic evaluations of acute hand and wrist injuries with a particular focus on direct, indirect and intangible costs. It aims to provide economic cost estimates of burden and discuss the cost components used in international literature. A search of cost-of-illness studies and health economic evaluations of acute hand and wrist injuries in various databases was conducted. Data extracted for each included study were: design, population, intervention, and estimates and measurement methodologies of direct, indirect and intangible costs. Reported costs were converted into US-dollars using historical exchange rates and then adjusted into 2015 US-dollars using an inflation calculator RESULTS: The search yielded 764 studies, of which 21 met the inclusion criteria. Twelve studies were cost-of-illness studies, and seven were health economic evaluations. The methodology used to derive direct, indirect and intangible costs differed markedly across all studies. Indirect costs represented a large portion of total cost in both cost-of-illness studies [64.5% (IQR 50.75-88.25)] and health economic evaluations [68% (IQR 49.25-73.5)]. The median total cost per case of all injury types was US$6951 (IQR $3357-$22,274) for cost-of-illness studies and US$8297 (IQR $3858-$33,939) for health economic evaluations. Few studies reported intangible cost data associated with acute hand and wrist injuries. Several studies have attempted to estimate the direct, indirect and intangible costs associated with acute hand and wrist injuries in various countries using heterogeneous methodologies. Estimates of the economic

Costing the Australian National Hand Hygiene Initiative.

Science.gov (United States)

Page, K; Barnett, A G; Campbell, M; Brain, D; Martin, E; Fulop, N; Graves, N

2014-11-01

The Australian National Hand Hygiene Initiative (NHHI) is a major patient safety programme co-ordinated by Hand Hygiene Australia (HHA) and funded by the Australian Commission for Safety and Quality in Health Care. The annual costs of running this programme need to be understood to know the cost-effectiveness of a decision to sustain it as part of health services. To estimate the annual health services cost of running the NHHI; the set-up costs are excluded. A health services perspective was adopted for the costing and collected data from the 50 largest public hospitals in Australia that implemented the initiative, covering all states and territories. The costs of HHA, the costs to the state-level infection-prevention groups, the costs incurred by each acute hospital, and the costs for additional alcohol-based hand rub are all included. The programme cost AU$5.56 million each year (US$5.76, £3.63 million). Most of the cost is incurred at the hospital level (65%) and arose from the extra time taken for auditing hand hygiene compliance and doing education and training. On average, each infection control practitioner spent 5h per week on the NHHI, and the running cost per annum to their hospital was approximately AU$120,000 in 2012 (US$124,000, £78,000). Good estimates of the total costs of this programme are fundamental to understanding the cost-effectiveness of implementing the NHHI. This paper reports transparent costing methods, and the results include their uncertainty. Copyright © 2014 The Healthcare Infection Society. Published by Elsevier Ltd. All rights reserved.

A cost analysis: processing maple syrup products

Science.gov (United States)

Neil K. Huyler; Lawrence D. Garrett

1979-01-01

A cost analysis of processing maple sap to syrup for three fuel types, oil-, wood-, and LP gas-fired evaporators, indicates that: (1) fuel, capital, and labor are the major cost components of processing sap to syrup; (2) wood-fired evaporators show a slight cost advantage over oil- and LP gas-fired evaporators; however, as the cost of wood approaches $50 per cord, wood...

THE CHALLENGE OF THE LARGEST STRUCTURES IN THE UNIVERSE TO COSMOLOGY

International Nuclear Information System (INIS)

Park, Changbom; Choi, Yun-Young; Kim, Sungsoo S.; Kim, Kap-Sung; Kim, Juhan; Gott III, J. Richard

2012-01-01

Large galaxy redshift surveys have long been used to constrain cosmological models and structure formation scenarios. In particular, the largest structures discovered observationally are thought to carry critical information on the amplitude of large-scale density fluctuations or homogeneity of the universe, and have often challenged the standard cosmological framework. The Sloan Great Wall (SGW) recently found in the Sloan Digital Sky Survey (SDSS) region casts doubt on the concordance cosmological model with a cosmological constant (i.e., the flat ΛCDM model). Here we show that the existence of the SGW is perfectly consistent with the ΛCDM model, a result that only our very large cosmological N-body simulation (the Horizon Run 2, HR2) could supply. In addition, we report on the discovery of a void complex in the SDSS much larger than the SGW, and show that such size of the largest void is also predicted in the ΛCDM paradigm. Our results demonstrate that an initially homogeneous isotropic universe with primordial Gaussian random phase density fluctuations growing in accordance with the general relativity can explain the richness and size of the observed large-scale structures in the SDSS. Using the HR2 simulation we predict that a future galaxy redshift survey about four times deeper or with 3 mag fainter limit than the SDSS should reveal a largest structure of bright galaxies about twice as big as the SGW.

Developing a Cost Model and Methodology to Estimate Capital Costs for Thermal Energy Storage

Energy Technology Data Exchange (ETDEWEB)

Glatzmaier, G.

2011-12-01

This report provides an update on the previous cost model for thermal energy storage (TES) systems. The update allows NREL to estimate the costs of such systems that are compatible with the higher operating temperatures associated with advanced power cycles. The goal of the Department of Energy (DOE) Solar Energy Technology Program is to develop solar technologies that can make a significant contribution to the United States domestic energy supply. The recent DOE SunShot Initiative sets a very aggressive cost goal to reach a Levelized Cost of Energy (LCOE) of 6 cents/kWh by 2020 with no incentives or credits for all solar-to-electricity technologies.1 As this goal is reached, the share of utility power generation that is provided by renewable energy sources is expected to increase dramatically. Because Concentrating Solar Power (CSP) is currently the only renewable technology that is capable of integrating cost-effective energy storage, it is positioned to play a key role in providing renewable, dispatchable power to utilities as the share of power generation from renewable sources increases. Because of this role, future CSP plants will likely have as much as 15 hours of Thermal Energy Storage (TES) included in their design and operation. As such, the cost and performance of the TES system is critical to meeting the SunShot goal for solar technologies. The cost of electricity from a CSP plant depends strongly on its overall efficiency, which is a product of two components - the collection and conversion efficiencies. The collection efficiency determines the portion of incident solar energy that is captured as high-temperature thermal energy. The conversion efficiency determines the portion of thermal energy that is converted to electricity. The operating temperature at which the overall efficiency reaches its maximum depends on many factors, including material properties of the CSP plant components. Increasing the operating temperature of the power generation

Capital and operating cost estimates for high temperature superconducting magnetic energy storage

International Nuclear Information System (INIS)

Schoenung, S.M.; Meier, W.R.; Fagaly, R.L.; Heiberger, M.; Stephens, R.B.; Leuer, J.A.; Guzman, R.A.

1992-01-01

Capital and operating costs have been estimated for mid-scale (2 to 200 Mwh) superconducting magnetic energy storage (SMES) designed to use high temperature superconductors (HTS). Capital costs are dominated by the cost of superconducting materials. Operating costs, primarily for regeneration, are significantly reduced for HTS-SMES in comparison to low temperature, conventional systems. This cost component is small compared to other O and M and capital components, when levelized annual costs are projected. In this paper, the developments required for HTS-SMES feasibility are discussed

Language interoperability for high-performance parallel scientific components

International Nuclear Information System (INIS)

Elliot, N; Kohn, S; Smolinski, B

1999-01-01

With the increasing complexity and interdisciplinary nature of scientific applications, code reuse is becoming increasingly important in scientific computing. One method for facilitating code reuse is the use of components technologies, which have been used widely in industry. However, components have only recently worked their way into scientific computing. Language interoperability is an important underlying technology for these component architectures. In this paper, we present an approach to language interoperability for a high-performance parallel, component architecture being developed by the Common Component Architecture (CCA) group. Our approach is based on Interface Definition Language (IDL) techniques. We have developed a Scientific Interface Definition Language (SIDL), as well as bindings to C and Fortran. We have also developed a SIDL compiler and run-time library support for reference counting, reflection, object management, and exception handling (Babel). Results from using Babel to call a standard numerical solver library (written in C) from C and Fortran show that the cost of using Babel is minimal, where as the savings in development time and the benefits of object-oriented development support for C and Fortran far outweigh the costs

Comprehensive investigation into historical pipeline construction costs and engineering economic analysis of Alaska in-state gas pipeline

Science.gov (United States)

Rui, Zhenhua

This study analyzes historical cost data of 412 pipelines and 220 compressor stations. On the basis of this analysis, the study also evaluates the feasibility of an Alaska in-state gas pipeline using Monte Carlo simulation techniques. Analysis of pipeline construction costs shows that component costs, shares of cost components, and learning rates for material and labor costs vary by diameter, length, volume, year, and location. Overall average learning rates for pipeline material and labor costs are 6.1% and 12.4%, respectively. Overall average cost shares for pipeline material, labor, miscellaneous, and right of way (ROW) are 31%, 40%, 23%, and 7%, respectively. Regression models are developed to estimate pipeline component costs for different lengths, cross-sectional areas, and locations. An analysis of inaccuracy in pipeline cost estimation demonstrates that the cost estimation of pipeline cost components is biased except for in the case of total costs. Overall overrun rates for pipeline material, labor, miscellaneous, ROW, and total costs are 4.9%, 22.4%, -0.9%, 9.1%, and 6.5%, respectively, and project size, capacity, diameter, location, and year of completion have different degrees of impacts on cost overruns of pipeline cost components. Analysis of compressor station costs shows that component costs, shares of cost components, and learning rates for material and labor costs vary in terms of capacity, year, and location. Average learning rates for compressor station material and labor costs are 12.1% and 7.48%, respectively. Overall average cost shares of material, labor, miscellaneous, and ROW are 50.6%, 27.2%, 21.5%, and 0.8%, respectively. Regression models are developed to estimate compressor station component costs in different capacities and locations. An investigation into inaccuracies in compressor station cost estimation demonstrates that the cost estimation for compressor stations is biased except for in the case of material costs. Overall average

Activity-based costing evaluation of [18F]-fludeoxyglucose production.

Science.gov (United States)

Krug, Bruno; Van Zanten, Annie; Pirson, Anne-Sophie; Crott, Ralph; Vander Borght, Thierry

2008-01-01

As healthcare expenses are escalating in many countries, the sector faces a new challenge of becoming more cost efficient. There is an urgent need for more accurate data on the costs of healthcare procedures. The cost of Positron Emission Tomography (PET) with [(18)F]-fludeoxyglucose ((18)F-FDG) studies is mainly influenced by the price of the radiopharmaceutical, which may vary throughout Europe from 300 to 500 Euro per patient dose (370 MBq). The aim of the current study is to conduct an activity-based costing (ABC) estimation of (18)F-FDG production in Europe to better identify the different cost components and to analyse their relative contribution to the total cost. Financial data were collected on capital expense and global operating costs through interviews with industry experts, PET centre managers, evaluation of prior studies, and review of expenses incurred at the University Medical Centre in Groningen (The Netherlands). After mapping the activities, we divided the cost in five categories: wage, equipment, consumables, overhead and space costs. A sensitivity analysis was performed for key cost components, including the compliance with regulatory requirements. The critical factor for profitability was throughput. Including the European regulation procedure, the cost for 370 MBq (18)F-FDG patient dose, 3 h EOS without delivery cost, ranges between 155 and 177 Euro/dose for two production runs and between 210 and 237 Euro/dose for one production run. These costs are predominantly determined by personnel and equipment costs, although the cost for quality assurance increases steadily. The ABC analysis provides significant insight into the production cost components of (18)F-FDG through different operating configurations. Reductions in equipment prices, increased availability of radiopharmaceuticals, growth in demand, and improvements in reimbursement will all contribute to the financial viability of this imaging technique.

Activity-based costing evaluation of [18F]-fludeoxyglucose production

International Nuclear Information System (INIS)

Krug, Bruno; Pirson, Anne-Sophie; Borght, Thierry vander; Zanten, Annie van; Crott, Ralph

2008-01-01

As healthcare expenses are escalating in many countries, the sector faces a new challenge of becoming more cost efficient. There is an urgent need for more accurate data on the costs of healthcare procedures. The cost of Positron Emission Tomography (PET) with [ 18 F]-fludeoxyglucose ( 18 F-FDG) studies is mainly influenced by the price of the radiopharmaceutical, which may vary throughout Europe from 300 to 500 Euro per patient dose (370 MBq). The aim of the current study is to conduct an activity-based costing (ABC) estimation of 18 F-FDG production in Europe to better identify the different cost components and to analyse their relative contribution to the total cost. Financial data were collected on capital expense and global operating costs through interviews with industry experts, PET centre managers, evaluation of prior studies, and review of expenses incurred at the University Medical Centre in Groningen (The Netherlands). After mapping the activities, we divided the cost in five categories: wage, equipment, consumables, overhead and space costs. A sensitivity analysis was performed for key cost components, including the compliance with regulatory requirements. The critical factor for profitability was throughput. Including the European regulation procedure, the cost for 370 MBq 18 F-FDG patient dose, 3 h EOS without delivery cost, ranges between 155 and 177 Euro/dose for two production runs and between 210 and 237 Euro/dose for one production run. These costs are predominantly determined by personnel and equipment costs, although the cost for quality assurance increases steadily. The ABC analysis provides significant insight into the production cost components of 18 F-FDG through different operating configurations. Reductions in equipment prices, increased availability of radiopharmaceuticals, growth in demand, and improvements in reimbursement will all contribute to the financial viability of this imaging technique. (orig.)

Ultra-low Cost, Lightweight, Molded, Chalcogenide Glass-Silicon Oxycarbide Composite Mirror Components, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — After optical performance, the most important metric for advanced optical systems is the areal cost (cost per square meter of collecting aperture). Future NASA space...

Tunable Microwave Component Technologies for SatCom-Platforms

Science.gov (United States)

Maune, Holger; Jost, Matthias; Wiens, Alex; Weickhmann, Christian; Reese, Roland; Nikfalazar, Mohammad; Schuster, Christian; Franke, Tobias; Hu, Wenjuan; Nickel, Matthias; Kienemund, Daniel; Prasetiadi, Ananto Eka; Jakoby, Rolf

2017-03-01

Modern communication platforms require a huge amount of switched RF component banks especially made of different filters and antennas to cover all operating frequencies and bandwidth for the targeted services and application scenarios. In contrast, reconfigurable devices made of tunable components lead to a considerable reduction in complexity, size, weight, power consumption, and cost. This paper gives an overview of suitable technologies for tunable microwave components especially for SatCom applications. Special attention is given to tunable components based on functional materials such as barium strontium titanate (BST) and liquid crystal (LC).

Cost estimation for a theta-pinch reactor

International Nuclear Information System (INIS)

Coultas, T.A.; Cook, J.M.; Crnkovich, P.; Dauzvardis, P.

1976-02-01

A simulation of a theta-pinch fusion power plant has been completed to the point where economic feasibility can be examined. A PL/I cost subprogram is presented for interfacing with the computer code TPFPP. This code is then used to obtain a first approximation of the costs for the reactor. Independent geometrical and plant design parameters are varied over a wide range, with simultaneous variation of magnetic field, minor first wall radius, and plasma maximum compression. The study indicates that the plant energy balance must be favorable, availability must be high, and major component costs must be low to achieve economical results. Although costing uncertainties remain, it is clear that development of easy and rapid replacement methods for reactor components is essential and that new staging concepts to reduce the implosion energy requirement must be pursued

[Cost of intensive care in a German hospital: cost-unit accounting based on the InEK matrix].

Science.gov (United States)

Martin, J; Neurohr, C; Bauer, M; Weiss, M; Schleppers, A

2008-05-01

The aim of this study was to determine the actual cost per intensive care unit (ICU) day in Germany based on routine data from an electronic patient data management system as well as analysis of cost-driving factors. A differentiation between days with and without mechanical ventilation was performed. On the ICU of a German focused-care hospital (896 beds, 12 anesthesiology ICU beds), cost per treatment day was calculated with or without mechanical ventilation from the perspective of the hospital. Costs were derived retrospectively with respect to the period between January and October 2006 by cost-unit accounting based on routine data collected from the ICU patients. Patients with a length of stay of at least 2 days on the ICU were included. Demographic, clinical and economical data were analyzed for patient characterization. Data of 407 patients (217 male and 190 female) were included in the analysis, of which 159 patients (100 male, 59 female) were completely or partially mechanically ventilated. The mean simplified acute physiology (SAPS) II score at the onset of ICU stay was 28.2. Average cost per ICU day was 1,265 EUR and costs for ICU days with and without mechanical ventilation amounted to 1,426 EUR and 1,145 EUR, respectively. Personnel costs (50%) showed the largest cost share followed by drugs plus medicinal products (18%) and infrastructure (16%). For the first time, a cost analysis of intensive care in Germany was performed with routine data based on the matrix of the institute for reimbursement in hospitals (InEK). The results revealed a higher resource use on the ICU than previously expected. The large share of personnel costs on the ICU was evident but is comparable to other medical departments in the hospital. The need for mechanical ventilation increases the daily costs of resources by approximately 25%.

Innovative dengue vector control interventions in Latin America: what do they cost?

Science.gov (United States)

Basso, César; Beltrán-Ayala, Efraín; Mitchell-Foster, Kendra; Cortés, Sebastián; Manrique-Saide, Pablo; Guillermo-May, Guillermo; Carvalho de Lima, Edilmar

2016-01-01

Background Five studies were conducted in Fortaleza (Brazil), Girardot (Colombia), Machala (Ecuador), Acapulco (Mexico), and Salto (Uruguay) to assess dengue vector control interventions tailored to the context. The studies involved the community explicitly in the implementation, and focused on the most productive breeding places for Aedes aegypti. This article reports the cost analysis of these interventions. Methods We conducted the costing from the perspective of the vector control program. We collected data on quantities and unit costs of the resources used to deliver the interventions. Comparable information was requested for the routine activities. Cost items were classified, analyzed descriptively, and aggregated to calculate total costs, costs per house reached, and incremental costs. Results Cost per house of the interventions were $18.89 (Fortaleza), $21.86 (Girardot), $30.61 (Machala), $39.47 (Acapulco), and $6.98 (Salto). Intervention components that focused mainly on changes to the established vector control programs seem affordable; cost savings were identified in Salto (−21%) and the clean patio component in Machala (−12%). An incremental cost of 10% was estimated in Fortaleza. On the other hand, there were also completely new components that would require sizeable financial efforts (installing insecticide-treated nets in Girardot and Acapulco costs $16.97 and $24.96 per house, respectively). Conclusions The interventions are promising, seem affordable and may improve the cost profile of the established vector control programs. The costs of the new components could be considerable, and should be assessed in relation to the benefits in reduced dengue burden. PMID:26924235

Mass balance of Greenland's three largest outlet glaciers - 2000–2010

NARCIS (Netherlands)

Howat, I.M.; Ahn, Y.; Joughin, I.; van den Broeke, M.R.; Lenaerts, J.T.M.; Smith, B.

2011-01-01

Acceleration of Greenland's three largest outlet glaciers, Helheim, Kangerdlugssuaq and Jakobshavn Isbræ, accounted for a substantial portion of the ice sheet's mass loss over the past decade. Rapid changes in their discharge, however, make their cumulative mass-change uncertain. We derive monthly

2011 Cost of Wind Energy Review

Energy Technology Data Exchange (ETDEWEB)

Tegen, S.; Lantz, E.; Hand, M.; Maples, B.; Smith, A.; Schwabe, P.

2013-03-01

This report describes the levelized cost of energy (LCOE) for a typical land-based wind turbine installed in the United States in 2011, as well as the modeled LCOE for a fixed-bottom offshore wind turbine installed in the United States in 2011. Each of the four major components of the LCOE equation are explained in detail, such as installed capital cost, annual energy production, annual operating expenses, and financing, and including sensitivity ranges that show how each component can affect LCOE. These LCOE calculations are used for planning and other purposes by the U.S. Department of Energy's Wind Program.

The Effects of Forage Policy on Feed Costs in Korea

Directory of Open Access Journals (Sweden)

Jae Bong Chang

2018-05-01

Full Text Available Feeding operations are substantial on livestock farms, besides being potentially expensive. Feeding efficiency has been considered a major influence on profits in the livestock industry. Indeed, feed costs are shown to be the largest single item of production cost in Korea. To promote production and use of domestic forage, the Korean government has enforced the forage base expansion program that strengthens the competitiveness of the livestock industry by reducing the production cost. The forage base expansion program includes three main policies: subsidized forage production, support for processing and distribution, and expanding land for forage production. This paper investigates the influence of the government’s policies often conjectured to have pronounced effects on forage production. To evaluate the forage policies, this paper uses a path-analysis approach linking government spending on forage base expansion programs and feed costs. Results indicate that the Korean government’s spending on supporting domestic forage production results in a decrease in the ratio of forage expenses to total feed cost.

Make-up wells drilling cost in financial model for a geothermal project

Science.gov (United States)

Oktaviani Purwaningsih, Fitri; Husnie, Ruly; Afuar, Waldy; Abdurrahman, Gugun

2017-12-01

After commissioning of a power plant, geothermal reservoir will encounter pressure decline, which will affect wells productivity. Therefore, further drilling is carried out to enhance steam production. Make-up wells are production wells drilled inside an already confirmed reservoir to maintain steam production in a certain level. Based on Sanyal (2004), geothermal power cost consists of three components, those are capital cost, O&M cost and make-up drilling cost. The make-up drilling cost component is a major part of power cost which will give big influence in a whole economical value of the project. The objective of this paper it to analyse the make-up wells drilling cost component in financial model of a geothermal power project. The research will calculate make-up wells requirements, drilling costs as a function of time and how they influence the financial model and affect the power cost. The best scenario in determining make-up wells strategy in relation with the project financial model would be the result of this research.

Dynamic modeling and simulation of power transformer maintenance costs

Directory of Open Access Journals (Sweden)

Ristić Olga

2016-01-01

Full Text Available The paper presents the dynamic model of maintenance costs of the power transformer functional components. Reliability is modeled combining the exponential and Weibull's distribution. The simulation was performed with the aim of corrective maintenance and installation of the continuous monitoring system of the most critical components. Simulation Dynamic System (SDS method and VENSIM PLE software was used to simulate the cost. In this way, significant savings in maintenance costs will be achieved with a small initial investment. [Projekat Ministarstva nauke Republike Srbije, br. III 41025 i br. OI 171007

Economic impacts of oil spills: Spill unit costs for tankers, pipelines, refineries, and offshore facilities. [Task 1, Final report

Energy Technology Data Exchange (ETDEWEB)

1993-10-15

The impacts of oil spills -- ranging from the large, widely publicized Exxon Valdez tanker incident to smaller pipeline and refinery spills -- have been costly to both the oil industry and the public. For example, the estimated costs to Exxon of the Valdez tanker spill are on the order of $4 billion, including $2.8 billion (in 1993 dollars) for direct cleanup costs and $1.125 billion (in 1992 dollars) for settlement of damages claims caused by the spill. Application of contingent valuation costs and civil lawsuits pending in the State of Alaska could raise these costs appreciably. Even the costs of the much smaller 1991 oil spill at Texaco`s refinery near Anacortes, Washington led to costs of $8 to 9 million. As a result, inexpensive waming, response and remediation technologies could lower oil spin costs, helping both the oil industry, the associated marine industries, and the environment. One means for reducing the impact and costs of oil spills is to undertake research and development on key aspects of the oil spill prevention, warming, and response and remediation systems. To target these funds to their best use, it is important to have sound data on the nature and size of spills, their likely occurrence and their unit costs. This information could then allow scarce R&D dollars to be spent on areas and activities having the largest impact. This report is intended to provide the ``unit cost`` portion of this crucial information. The report examines the three key components of the US oil supply system, namely, tankers and barges; pipelines and refineries; and offshore production facilities. The specific purpose of the study was to establish the unit costs of oil spills. By manipulating this key information into a larger matrix that includes the size and frequency of occurrence of oil spills, it will be possible` to estimate the likely future impacts, costs, and sources of oil spills.

Estimating pressurized water reactor decommissioning costs: A user's manual for the PWR Cost Estimating Computer Program (CECP) software

International Nuclear Information System (INIS)

Bierschbach, M.C.; Mencinsky, G.J.

1993-10-01

With the issuance of the Decommissioning Rule (July 27, 1988), nuclear power plant licensees are required to submit to the US Regulatory Commission (NRC) for review, decommissioning plans and cost estimates. This user's manual and the accompanying Cost Estimating Computer Program (CECP) software provide a cost-calculating methodology to the NRC staff that will assist them in assessing the adequacy of the licensee submittals. The CECP, designed to be used on a personnel computer, provides estimates for the cost of decommissioning PWR plant stations to the point of license termination. Such cost estimates include component, piping, and equipment removal costs; packaging costs; decontamination costs; transportation costs; burial costs; and manpower costs. In addition to costs, the CECP also calculates burial volumes, person-hours, crew-hours, and exposure person-hours associated with decommissioning

Dissecting Costs of CT Study: Application of TDABC (Time-driven Activity-based Costing) in a Tertiary Academic Center.

Science.gov (United States)

Anzai, Yoshimi; Heilbrun, Marta E; Haas, Derek; Boi, Luca; Moshre, Kirk; Minoshima, Satoshi; Kaplan, Robert; Lee, Vivian S

2017-02-01

The lack of understanding of the real costs (not charge) of delivering healthcare services poses tremendous challenges in the containment of healthcare costs. In this study, we applied an established cost accounting method, the time-driven activity-based costing (TDABC), to assess the costs of performing an abdomen and pelvis computed tomography (AP CT) in an academic radiology department and identified opportunities for improved efficiency in the delivery of this service. The study was exempt from an institutional review board approval. TDABC utilizes process mapping tools from industrial engineering and activity-based costing. The process map outlines every step of discrete activity and duration of use of clinical resources, personnel, and equipment. By multiplying the cost per unit of capacity by the required task time for each step, and summing each component cost, the overall costs of AP CT is determined for patients in three settings, inpatient (IP), outpatient (OP), and emergency departments (ED). The component costs to deliver an AP CT study were as follows: radiologist interpretation: 40.1%; other personnel (scheduler, technologist, nurse, pharmacist, and transporter): 39.6%; materials: 13.9%; and space and equipment: 6.4%. The cost of performing CT was 13% higher for ED patients and 31% higher for inpatients (IP), as compared to that for OP. The difference in cost was mostly due to non-radiologist personnel costs. Approximately 80% of the direct costs of AP CT to the academic medical center are related to labor. Potential opportunities to reduce the costs include increasing the efficiency of utilization of CT, substituting lower cost resources when appropriate, and streamlining the ordering system to clarify medical necessity and clinical indications. Copyright © 2017 The Association of University Radiologists. Published by Elsevier Inc. All rights reserved.

Parabolic Trough Reference Plant for Cost Modeling with the Solar Advisor Model (SAM)

Energy Technology Data Exchange (ETDEWEB)

Turchi, C.

2010-07-01

This report describes a component-based cost model developed for parabolic trough solar power plants. The cost model was developed by the National Renewable Energy Laboratory (NREL), assisted by WorleyParsons Group Inc., for use with NREL's Solar Advisor Model (SAM). This report includes an overview and explanation of the model, two summary contract reports from WorleyParsons, and an Excel spreadsheet for use with SAM. The cost study uses a reference plant with a 100-MWe capacity and six hours of thermal energy storage. Wet-cooling and dry-cooling configurations are considered. The spreadsheet includes capital and operating cost by component to allow users to estimate the impact of changes in component costs.

Costs of Reducing Greenhouse Gas Emissions: A Case Study of India’s Power Generation Sector

OpenAIRE

Manish Gupta

2006-01-01

If India were to participate in any international effort towards mitigating CO2 emissions, the power sector which is one of the largest emitters of CO2 in the country would be required to play a major role. In this context the study estimates the marginal abatement costs, which correspond to the costs incurred by the power plants to reduce one unit of CO2 from the current level. The study uses an output distance function approach and its duality with the revenue function to derive these costs...

NASA Instrument Cost/Schedule Model

Science.gov (United States)

Habib-Agahi, Hamid; Mrozinski, Joe; Fox, George

2011-01-01

NASA's Office of Independent Program and Cost Evaluation (IPCE) has established a number of initiatives to improve its cost and schedule estimating capabilities. 12One of these initiatives has resulted in the JPL developed NASA Instrument Cost Model. NICM is a cost and schedule estimator that contains: A system level cost estimation tool; a subsystem level cost estimation tool; a database of cost and technical parameters of over 140 previously flown remote sensing and in-situ instruments; a schedule estimator; a set of rules to estimate cost and schedule by life cycle phases (B/C/D); and a novel tool for developing joint probability distributions for cost and schedule risk (Joint Confidence Level (JCL)). This paper describes the development and use of NICM, including the data normalization processes, data mining methods (cluster analysis, principal components analysis, regression analysis and bootstrap cross validation), the estimating equations themselves and a demonstration of the NICM tool suite.

Energy-dense fast food products cost less: an observational study of the energy density and energy cost of Australian fast foods.

Science.gov (United States)

Wellard, Lyndal; Havill, Michelle; Hughes, Clare; Watson, Wendy L; Chapman, Kathy

2015-12-01

To examine the association between energy cost and energy density of fast food products. Twenty Sydney outlets of the five largest fast food chains were surveyed four times. Price and kilojoule data were collected for all limited-time-only menu items (n=54) and a sample of standard items (n=67). Energy cost ($/kilojoule) and energy density (kilojoules/gram) of menu items were calculated. There was a significant inverse relationship between menu item energy density and energy cost (pFast food chains could provide a wider range of affordable, lower-energy foods, use proportional pricing of larger serve sizes, or change defaults in meals to healthier options. More research is required to determine the most effective strategy to reduce the negative impact of fast food on the population's diet. Current pricing in the fast food environment may encourage unhealthier purchases. © 2015 Public Health Association of Australia.

The largest glitch observed in the Crab pulsar

Science.gov (United States)

Shaw, B.; Lyne, A. G.; Stappers, B. W.; Weltevrede, P.; Bassa, C. G.; Lien, A. Y.; Mickaliger, M. B.; Breton, R. P.; Jordan, C. A.; Keith, M. J.; Krimm, H. A.

2018-05-01

We have observed a large glitch in the Crab pulsar (PSR B0531+21). The glitch occurred around MJD 58064 (2017 November 8) when the pulsar underwent an increase in the rotation rate of Δν = 1.530 × 10-5 Hz, corresponding to a fractional increase of Δν/ν = 0.516 × 10-6 making this event the largest glitch ever observed in this source. Due to our high-cadence and long-dwell time observations of the Crab pulsar we are able to partially resolve a fraction of the total spin-up of the star. This delayed spin-up occurred over a timescale of ˜1.7 days and is similar to the behaviour seen in the 1989 and 1996 large Crab pulsar glitches. The spin-down rate also increased at the glitch epoch by Δ \\dot{ν } / \\dot{ν } = 7 × 10^{-3}. In addition to being the largest such event observed in the Crab, the glitch occurred after the longest period of glitch inactivity since at least 1984 and we discuss a possible relationship between glitch size and waiting time. No changes to the shape of the pulse profile were observed near the glitch epoch at 610 MHz or 1520 MHz, nor did we identify any changes in the X-ray flux from the pulsar. The long-term recovery from the glitch continues to progress as \\dot{ν } slowly rises towards pre-glitch values. In line with other large Crab glitches, we expect there to be a persistent change to \\dot{ν }. We continue to monitor the long-term recovery with frequent, high quality observations.

CENET: Cost Efficiency in a New Era with new Technology

Energy Technology Data Exchange (ETDEWEB)

Karlsen, Jan E.; Lund, Bjoernar; Bos, Christian F.M.; Stokka, Sigmund

1997-12-31

This report relates to the CENET (Cost Efficiency in a New Era with new Technology) project the oil and gas in Europe. Key objectives of the CENET project are to determine the role of RTD (Research and Technology Development) in European oil and gas industry towards improved value and cost reduction with a particular focus on the means of developing offshore European marginal fields commercially, to identify RTD areas with the largest potential for improved value and cost reduction and technological developments and advances which are likely to increase European competitiveness internationally, and to provide guidance to European governments when deciding RTD priorities. A new era with new technology concerns increased oil and gas potential during the next century, a new era with clean, safe and cost efficient energy production, a new era with a new business structure, and globalization of the industry. 44 tabs., 5 figs., 23 tabs.

Layout Optimization Model for the Production Planning of Precast Concrete Building Components

Directory of Open Access Journals (Sweden)

Dong Wang

2018-05-01

Full Text Available Precast concrete comprises the basic components of modular buildings. The efficiency of precast concrete building component production directly impacts the construction time and cost. In the processes of precast component production, mold setting has a significant influence on the production efficiency and cost, as well as reducing the resource consumption. However, the development of mold setting plans is left to the experience of production staff, with outcomes dependent on the quality of human skill and experience available. This can result in sub-optimal production efficiencies and resource wastage. Accordingly, in order to improve the efficiency of precast component production, this paper proposes an optimization model able to maximize the average utilization rate of pallets used during the molding process. The constraints considered were the order demand, the size of the pallet, layout methods, and the positional relationship of components. A heuristic algorithm was used to identify optimization solutions provided by the model. Through empirical analysis, and as exemplified in the case study, this research is significant in offering a prefabrication production planning model which improves pallet utilization rates, shortens component production time, reduces production costs, and improves the resource utilization. The results clearly demonstrate that the proposed method can facilitate the precast production plan providing strong practical implications for production planners.

Component protection based automatic control

International Nuclear Information System (INIS)

Otaduy, P.J.

1992-01-01

Control and safety systems as well as operation procedures are designed on the basis of critical process parameters limits. The expectation is that short and long term mechanical damage and process failures will be avoided by operating the plant within the specified constraints envelopes. In this paper, one of the Advanced Liquid Metal Reactor (ALMR) design duty cycles events is discussed to corroborate that the time has come to explicitly make component protection part of the control system. Component stress assessment and aging data should be an integral part of the control system. Then transient trajectory planning and operating limits could be aimed at minimizing component specific and overall plant component damage cost functions. The impact of transients on critical components could then be managed according to plant lifetime design goals. The need for developing methodologies for online transient trajectory planning and assessment of operating limits in order to facilitate the explicit incorporation of damage assessment capabilities to the plant control and protection systems is discussed. 12 refs

Upgrade and benchmarking of the NIFS physics-engineering-cost code

International Nuclear Information System (INIS)

Dolan, T.J.; Yamazaki, K.

2004-07-01

The NIFS Physics-Engineering-Cost (PEC) code for helical and tokamak fusion reactors is upgraded by adding data from three blanket-shield designs, a new cost section based on the ARIES cost schedule, more recent unit costs, and improved algorithms for various computations. The PEC code is also benchmarked by modeling the ARIES-AT (advanced technology) tokamak and the ARIES-SPPS (stellarator power plant system). The PEC code succeeds in predicting many of the pertinent plasma parameters and reactor component masses within about 10%. There are cost differences greater than 10% for some fusion power core components, which may be attributed to differences of unit costs used by the codes. The COEs estimated by the PEC code differ from the COEs of the ARIES-AT and ARIES-SPPS studies by 5%. (author)

Longevity in Calumma parsonii, the World's largest chameleon.

Science.gov (United States)

Tessa, Giulia; Glaw, Frank; Andreone, Franco

2017-03-01

Large body size of ectothermic species can be correlated with high life expectancy. We assessed the longevity of the World's largest chameleon, the Parson's chameleon Calumma parsonii from Madagascar by using skeletochronology of phalanges taken from preserved specimens held in European natural history museums. Due to the high bone resorption we can provide only the minimum age of each specimen. The highest minimum age detected was nine years for a male and eight years for a female, confirming that this species is considerably long living among chameleons. Our data also show a strong correlation between snout-vent length and estimated age. Copyright © 2017 Elsevier Inc. All rights reserved.

Pricing end-of-life components

Science.gov (United States)

Vadde, Srikanth; Kamarthi, Sagar V.; Gupta, Surendra M.

2005-11-01

The main objective of a product recovery facility (PRF) is to disassemble end-of-life (EOL) products and sell the reclaimed components for reuse and recovered materials in second-hand markets. Variability in the inflow of EOL products and fluctuation in demand for reusable components contribute to the volatility in inventory levels. To stay profitable the PRFs ought to manage their inventory by regulating the price appropriately to minimize holding costs. This work presents two deterministic pricing models for a PRF bounded by environmental regulations. In the first model, the demand is price dependent and in the second, the demand is both price and time dependent. The models are valid for single component with no inventory replenishment sale during the selling horizon . Numerical examples are presented to illustrate the models.

The cost of care homes for people with dementia in England: a modelling approach.

Science.gov (United States)

Romeo, Renee; Knapp, Martin; Salverda, Suzanne; Orrell, Martin; Fossey, Jane; Ballard, Clive

2017-12-01

To examine the cost of care for people with dementia in institutional care settings, to understand the major cost drivers and to highlight opportunities for service development. Data on 277 residents with dementia in 16 UK residential or nursing homes were collected. We estimated care and support costs and fitted models to the data. Sensitivity analyses were also conducted. Care home residents cost £792 weekly: 95% of the costs accounted for by direct fees. Hospital contacts contributed the largest proportion of the additional costs. Having an established diagnosis of dementia (b = 0.070; p < 0.05) was associated with higher costs. No association was found between cost and needs (b = -0.002; p = 0.818). The absence of an association between cost and needs emphasizes the importance of a more needs-based costing system which could result in clinical and economic advantages. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Large components dismantlement flow chart in the United States

International Nuclear Information System (INIS)

Szilagyi, Andrew

2012-01-01

The beginning steps are identical for large or regular components. The starting point of this flowchart assumes that it has already been determined the component has been categorized as waste. The first step is to make sure that all components are handled safely, that ALARA is followed, that any security concerns are managed, and that the dismantlement cost or any other cost is constantly reviewed. After this, the process knowledge and acceptable knowledge should be reviewed; this will help in the following step which is characterization with non-destructive assay. At this point, the project manager is presented with the first three alternatives which will determine the path to follow: Low level waste (LLW) disposal flowchart, part 1 to 3 , Transuranic waste (TRU) disposal flowchart, part 1 and 2 , or High level waste (HLW) disposal flowchart

Cost reduction study for the LANL KrF laser-driven LMF design

International Nuclear Information System (INIS)

1989-01-01

This report is in fulfillment of the deliverable requirements for the optical components portions of the LANL-KrF Laser-Driven LMF Design Cost Reduction Study. This report examines the future cost reductions that may accrue through the use of mass production, innovative manufacturing techniques, and new materials. Results are based on data collection and survey of optical component manufacturers, BDM experience, and existing cost models. These data provide a good representation of current methods and technologies from which future estimates can be made. From these data, a series of scaling relationships were developed to project future costs for a selected set of technologies. The scaling relationships are sensitive to cost driving parameters such as size and surface figure requirements as well as quantity requirements, production rate, materials, and manufacturing processes. In addition to the scaling relationships, descriptions of the selected processes were developed along with graphical representations of the processes. This report provides a useful tool in projecting the costs of advanced laser concepts at the component level of detail. A mix of the most diverse yet comparable technologies was chosen for this study. This yielded a useful, yet manageable number of variables to examine. The study has resulted in a first-order cost model which predicts the relative cost behavior of optical components within different variable constraints

Emotional stability components of human performance problems

International Nuclear Information System (INIS)

Wexler, R.H.

1987-01-01

Over half of all significant events that occur in nuclear plants involve human performance problems. There is increasing worldwide recognition that human performance problems have a significant impact on the safety, cost, and efficiency of nuclear plant operations. Emotional stability components have an important direct and indirect impact on human performance problems. This paper examines emotional stability components that are currently incorporated into human performance evaluation systems (HPES) in nuclear plants. It describes HPES programs being developed around the world, the emotional stability components that are currently referred to in these programs, and suggestions for improving HPES programs through a greater understanding of emotion stability components. A review of emotional stability components that may hinder or promote a plant environment that encourages the voluntary reporting and correction of human error is also presented

Cost-Efficacy Analysis of Out-of-District Special Education Placements: An Evaluative Measure of Behavior Support Intervention in Public Schools.

Science.gov (United States)

Putnam, Robert F.; Luiselli, James K.; Sennett, Kenneth; Malonson, Joanne

2002-01-01

Evaluation of out-of-district special education placement costs in the 15 largest Massachusetts public school districts found the criterion school district (which had developed a system-wide approach to behavioral intervention) had the lowest per capita cost, lowest percentage of total school budget consumed by out-of-district placements, and the…

Cost analysis guidelines

International Nuclear Information System (INIS)

Strait, R.S.

1996-01-01

The first phase of the Depleted Uranium Hexafluoride Management Program (Program)--management strategy selection--consists of several program elements: Technology Assessment, Engineering Analysis, Cost Analysis, and preparation of an Environmental Impact Statement (EIS). Cost Analysis will estimate the life-cycle costs associated with each of the long-term management strategy alternatives for depleted uranium hexafluoride (UF6). The scope of Cost Analysis will include all major expenditures, from the planning and design stages through decontamination and decommissioning. The costs will be estimated at a scoping or preconceptual design level and are intended to assist decision makers in comparing alternatives for further consideration. They will not be absolute costs or bid-document costs. The purpose of the Cost Analysis Guidelines is to establish a consistent approach to analyzing of cost alternatives for managing Department of Energy's (DOE's) stocks of depleted uranium hexafluoride (DUF6). The component modules that make up the DUF6 management program differ substantially in operational maintenance, process-options, requirements for R and D, equipment, facilities, regulatory compliance, (O and M), and operations risk. To facilitate a consistent and equitable comparison of costs, the guidelines offer common definitions, assumptions or basis, and limitations integrated with a standard approach to the analysis. Further, the goal is to evaluate total net life-cycle costs and display them in a way that gives DOE the capability to evaluate a variety of overall DUF6 management strategies, including commercial potential. The cost estimates reflect the preconceptual level of the designs. They will be appropriate for distinguishing among management strategies

Hydrogen Production Cost Estimate Using Biomass Gasification: Independent Review

Energy Technology Data Exchange (ETDEWEB)

Ruth, M.

2011-10-01

This independent review is the conclusion arrived at from data collection, document reviews, interviews and deliberation from December 2010 through April 2011 and the technical potential of Hydrogen Production Cost Estimate Using Biomass Gasification. The Panel reviewed the current H2A case (Version 2.12, Case 01D) for hydrogen production via biomass gasification and identified four principal components of hydrogen levelized cost: CapEx; feedstock costs; project financing structure; efficiency/hydrogen yield. The panel reexamined the assumptions around these components and arrived at new estimates and approaches that better reflect the current technology and business environments.

Low Cost High Performance Generator Technology Program. Volume 3. Component development

International Nuclear Information System (INIS)

1975-06-01

The status of the component development effort both in the thermoelectric module area and in the heat source task is reported. In addition, related efforts by outside facilities are identified and a bibliography of heat source development documents is presented

Energy and life-cycle cost analysis of a six-story office building

Science.gov (United States)

Turiel, I.

1981-10-01

An energy analysis computer program, DOE-2, was used to compute annual energy use for a typical office building as originally designed and with several energy conserving design modifications. The largest energy use reductions were obtained with the incorporation of daylighting techniques, the use of double pane windows, night temperature setback, and the reduction of artificial lighting levels. A life-cycle cost model was developed to assess the cost-effectiveness of the design modifications discussed. The model incorporates such features as inclusion of taxes, depreciation, and financing of conservation investments. The energy conserving strategies are ranked according to economic criteria such as net present benefit, discounted payback period, and benefit to cost ratio.

Bayesian component separation: The Planck experience

Science.gov (United States)

Wehus, Ingunn Kathrine; Eriksen, Hans Kristian

2018-05-01

Bayesian component separation techniques have played a central role in the data reduction process of Planck. The most important strength of this approach is its global nature, in which a parametric and physical model is fitted to the data. Such physical modeling allows the user to constrain very general data models, and jointly probe cosmological, astrophysical and instrumental parameters. This approach also supports statistically robust goodness-of-fit tests in terms of data-minus-model residual maps, which are essential for identifying residual systematic effects in the data. The main challenges are high code complexity and computational cost. Whether or not these costs are justified for a given experiment depends on its final uncertainty budget. We therefore predict that the importance of Bayesian component separation techniques is likely to increase with time for intensity mapping experiments, similar to what has happened in the CMB field, as observational techniques mature, and their overall sensitivity improves.

Global CO2 efficiency: Country-wise estimates using a stochastic cost frontier

International Nuclear Information System (INIS)

Herrala, Risto; Goel, Rajeev K.

2012-01-01

This paper examines global carbon dioxide (CO 2 ) efficiency by employing a stochastic cost frontier analysis of about 170 countries in 1997 and 2007. The main contribution lies in providing a new approach to environmental efficiency estimation, in which the efficiency estimates quantify the distance from the policy objective of minimum emissions. We are able to examine a very large pool of nations and provide country-wise efficiency estimates. We estimate three econometric models, corresponding with alternative interpretations of the Cancun vision (Conference of the Parties 2011). The models reveal progress in global environmental efficiency during a preceding decade. The estimates indicate vast differences in efficiency levels, and efficiency changes across countries. The highest efficiency levels are observed in Africa and Europe, while the lowest are clustered around China. The largest efficiency gains were observed in central and eastern Europe. CO 2 efficiency also improved in the US and China, the two largest emitters, but their ranking in terms of CO 2 efficiency deteriorated. Policy implications are discussed. - Highlights: ► We estimate global environmental efficiency in line with the Cancun vision, using a stochastic cost frontier. ► The study covers 170 countries during a 10 year period, ending in 2007. ► The biggest improvements occurred in Europe, and efficiency falls in South America. ► The efficiency ranking of US and China, the largest emitters, deteriorated. ► In 2007, highest efficiency was observed in Africa and Europe, and the lowest around China.

APS beamline standard components handbook

International Nuclear Information System (INIS)

Kuzay, T.M.

1992-01-01

It is clear that most Advanced Photon Source (APS) Collaborative Access Team (CAT) members would like to concentrate on designing specialized equipment related to their scientific programs rather than on routine or standard beamline components. Thus, an effort is in progress at the APS to identify standard and modular components of APS beamlines. Identifying standard components is a nontrivial task because these components should support diverse beamline objectives. To assist with this effort, the APS has obtained advice and help from a Beamline Standardization and Modularization Committee consisting of experts in beamline design, construction, and operation. The staff of the Experimental Facilities Division identified various components thought to be standard items for beamlines, regardless of the specific scientific objective of a particular beamline. A generic beamline layout formed the basis for this identification. This layout is based on a double-crystal monochromator as the first optical element, with the possibility of other elements to follow. Pre-engineering designs were then made of the identified standard components. The Beamline Standardization and Modularization Committee has reviewed these designs and provided very useful input regarding the specifications of these components. We realize that there will be other configurations that may require special or modified components. This Handbook in its current version (1.1) contains descriptions, specifications, and pre-engineering design drawings of these standard components. In the future, the APS plans to add engineering drawings of identified standard beamline components. Use of standard components should result in major cost reductions for CATs in the areas of beamline design and construction

Analysis and modeling of rail maintenance costs

Directory of Open Access Journals (Sweden)

Amir Ali Bakhshi

2012-01-01

Full Text Available Railroad maintenance engineering plays an important role on availability of roads and reducing the cost of railroad incidents. Rail is of the most important parts of railroad industry, which needs regular maintenance since it covers a significant part of total maintenance cost. Any attempt on optimizing total cost of maintenance could substantially reduce the cost of railroad system and it can reduce total cost of the industry. The paper presents a new method to estimate the cost of rail failure using different cost components such as cost of inspection and cost of risk associated with possible accidents. The proposed model of this paper is used for a real-world case study of railroad transportation of Tehran region and the results have been analyzed.

Novel cost controlled materials and processing for primary structures

Science.gov (United States)

Dastin, S. J.

1993-01-01

Textile laminates, developed a number of years ago, have recently been shown to be applicable to primary aircraft structures for both small and large components. Such structures have the potential to reduce acquisition costs but require advanced automated processing to keep costs controlled while verifying product reliability and assuring structural integrity, durability and affordable life-cycle costs. Recently, resin systems and graphite-reinforced woven shapes have been developed that have the potential for improved RTM processes for aircraft structures. Ciba-Geigy, Brochier Division has registered an RTM prepreg reinforcement called 'Injectex' that has shown effectivity for aircraft components. Other novel approaches discussed are thermotropic resins producing components by injection molding and ceramic polymers for long-duration hot structures. The potential of such materials and processing will be reviewed along with initial information/data available to date.

Dynamic analysis of once-through and closed fuel cycle economics using Monte Carlo simulation

Energy Technology Data Exchange (ETDEWEB)

Choi, Sungyeol, E-mail: csy@kaeri.re.kr; Lee, Hyo Jik, E-mail: hyojik@kaeri.re.kr; Ko, Won Il, E-mail: nwiko@kaeri.re.kr

2014-10-01

Highlights: • Dynamic behavior of system costs, both reactor and fuel cycle costs, is analyzed. • Relative economics of once-through and closed fuel cycles is explored. • Probabilistic approaches are adopted for levelized electricity generation costs. • Main cost drivers for cost gaps between once-through and closed cycles are identified. - Abstract: Although no consensus about the best approach to manage spent fuels has been achieved, economics is one of the major criteria for assessing and selecting acceptable management options. This study compares the reactor and fuel cycle costs of the closed system associated with sodium-cooled fast reactors and pyroprocessing versus the once-through system. We specifically investigated the fuel cycle transition cases of the Republic of Korea from 2013 to 2100. The results revealed that the closed system (34.00 mills/kWh as a mean value) could be more expensive than the once-through system (32.75 mills/kWh). In contrast, the once-through fuel cycle costs (8.31 mills/kWh), excluding reactor costs, were projected to be greater than the closed fuel cycle costs (7.77 mills/kWh) because of the increased costs of interim storage estimated by the Korean government and the limited contribution of backend fuel cycle components to the discounted costs. The capital cost of sodium-cooled fast reactor is the largest component contributing to the cost gap between the two systems. Among fuel cycle components, pyroprocessing has the largest uncertainty contribution to the cost gap. We also calculated the breakeven unit costs of SFR capital cost and PWR spent fuel pyroprocessing cost.

Executive Compensation and the Cost of Debt

NARCIS (Netherlands)

Kabir, Rezaul; Liu, Hao; Veld-Merkoulova, Yulia V.

2013-01-01

This study examines how different components of executive compensation affect the cost of debt. We find that debt-like and equity-like pay components have differing effects: an increase in defined benefit pensions is associated with lower bond yield spread, while higher share holdings lead to higher

Laser based refurbishment of steel mill components

CSIR Research Space (South Africa)

Kazadi, P

2006-03-01

Full Text Available Laser refurbishment capabilities were demonstrated and promising results were obtained for repair of distance sleeves, foot rolls, descaler cassette, idler rolls. Based on the cost projections and the results of the in-situ testing, components which...

Development of a practical costing method for hospitals.

Science.gov (United States)

Cao, Pengyu; Toyabe, Shin-Ichi; Akazawa, Kouhei

2006-03-01

To realize an effective cost control, a practical and accurate cost accounting system is indispensable in hospitals. In traditional cost accounting systems, the volume-based costing (VBC) is the most popular cost accounting method. In this method, the indirect costs are allocated to each cost object (services or units of a hospital) using a single indicator named a cost driver (e.g., Labor hours, revenues or the number of patients). However, this method often results in rough and inaccurate results. The activity based costing (ABC) method introduced in the mid 1990s can prove more accurate results. With the ABC method, all events or transactions that cause costs are recognized as "activities", and a specific cost driver is prepared for each activity. Finally, the costs of activities are allocated to cost objects by the corresponding cost driver. However, it is much more complex and costly than other traditional cost accounting methods because the data collection for cost drivers is not always easy. In this study, we developed a simplified ABC (S-ABC) costing method to reduce the workload of ABC costing by reducing the number of cost drivers used in the ABC method. Using the S-ABC method, we estimated the cost of the laboratory tests, and as a result, similarly accurate results were obtained with the ABC method (largest difference was 2.64%). Simultaneously, this new method reduces the seven cost drivers used in the ABC method to four. Moreover, we performed an evaluation using other sample data from physiological laboratory department to certify the effectiveness of this new method. In conclusion, the S-ABC method provides two advantages in comparison to the VBC and ABC methods: (1) it can obtain accurate results, and (2) it is simpler to perform. Once we reduce the number of cost drivers by applying the proposed S-ABC method to the data for the ABC method, we can easily perform the cost accounting using few cost drivers after the second round of costing.

Fixed export costs and multi-product firms

NARCIS (Netherlands)

Creusen, H.; Smeets, R.

2011-01-01

This paper has two aims. First, we uncover some salient components of fixed export costs, which play a crucial role in recent heterogeneous firms models of international trade. Second, we investigate whether the importance of these fixed export costs varies with the size of a firms export product

Analytic approximation to the largest eigenvalue distribution of a white Wishart matrix

CSIR Research Space (South Africa)

Vlok, JD

2012-08-14

Full Text Available offers largely simplified computation and provides statistics such as the mean value and region of support of the largest eigenvalue distribution. Numeric results from the literature are compared with the approximation and Monte Carlo simulation results...

Costing the OMNIUM-G system 7500

Science.gov (United States)

Fortgang, H. R.

1980-01-01

A complete OMNIUM-G System 7500 was cost analyzed for annual production quantities ranging from 25 to 10,000 units per year. Parts and components were subjected to in-depth scrutiny to determine optimum manufacturing processes, coupled with make or buy decisions on materials and small parts. When production quantities increase both labor and material costs reduce substantially. A redesign of the system that was analyzed could result in lower costs when annual production runs approach 100,000 units/year. Material and labor costs for producing 25, 100, 25,000 and 100,00 units are given for 17 subassembly units.

APS beamline standard components handbook, Version 1.3

International Nuclear Information System (INIS)

Hahn, U.; Shu, D.; Kuzay, T.M.

1993-02-01

This Handbook in its current version (1.3) contains descriptions, specifications, and preliminary engineering design drawings for many of the standard components. The design status and schedules have been provided wherever possible. In the near future, the APS plans to update engineering drawings of identified standard beamline components and complete the Handbook. The completed version of this Handbook will become available to both the CATs and potential vendors. Use of standard components should result in major cost reductions for CATs in the areas of beamline design and construction

Optimal design of multi-state weighted k-out-of-n systems based on component design

International Nuclear Information System (INIS)

Li Wei; Zuo, Ming J.

2008-01-01

This paper presents a study on design optimization of multi-state weighted k-out-of-n systems. The studied system reliability model is more general than the traditional k-out-of-n system model. The system and its components are capable of assuming a whole range of performance levels, varying from perfect functioning to complete failure. A utility value corresponding to each state is used to indicate the corresponding performance level. A widely studied reliability optimization problem is the 'component selection problem', which involves selection of components with known reliability and cost characteristics. Less adequately addressed has been the problem of determining system cost and utility based on the relationships between component reliability, cost and utility. This paper addresses this topic. All the optimization problems dealt with in this paper can be categorized as either minimizing the expected total system cost subject to system reliability requirements, or maximizing system reliability subject to total system cost limitation. The resulting optimization problems are too complicated to be solved by traditional optimization approaches; therefore, genetic algorithm (GA) is used to solve them. Our results show that GA is a powerful tool for solving these kinds of problems

Health-related economic costs of the Three-Mile Island accident.

Science.gov (United States)

Hu, T W; Slaysman, K S

1984-01-01

On March 1979, a nuclear power station at Three-Mile Island (TMI) near Harrisburg, Pennsylvania, had a major breakdown. During the two-week period of the accident, about 150,000 residents were evacuated for reasons associated with safety and health. Many residents during and after the accident, regardless of whether they left or stayed, made mental and physical adjustments due to this accident. This paper is to estimate the economic costs incurred by individuals or communities as a result of a change in physical or mental health status and/or a change in health care services due to the TMI accident. The findings indicate that stress symptoms caused by the accident did affect the health-related behaviors of area residents. Of the costs examined, the economic costs of work days lost and physician visits are the largest cost items. There were some increases in consumption of alcohol, cigarettes, and tranquilizers immediately following the accident.

Component Composability Issues in Object-Oriented Programming

NARCIS (Netherlands)

Aksit, Mehmet; Tekinerdogan, B.

1997-01-01

Building software from reusable components is considered important in reducing development costs. Object-oriented languages such as C++, Smalltalk and Java, however, are not capable of expressing certain aspects of applications in a composable way. Software engineers may experience difficulties in

The Novel Application of Optimization and Charge Blended Energy Management Control for Component Downsizing within a Plug-in Hybrid Electric Vehicle

Directory of Open Access Journals (Sweden)

Ravi Shankar

2012-11-01

Full Text Available  The adoption of Plug-in Hybrid Electric Vehicles (PHEVs is widely seen as an interim solution for the decarbonization of the transport sector. Within a PHEV, determining the required energy storage capacity of the battery remains one of the primary concerns for vehicle manufacturers and system integrators. This fact is particularly pertinent since the battery constitutes the largest contributor to vehicle mass. Furthermore, the financial cost associated with the procurement, design and integration of battery systems is often cited as one of the main barriers to vehicle commercialization. The ability to integrate the optimization of the energy management control system with the sizing of key PHEV powertrain components presents a significant area of research. Contained within this paper is an optimization study in which a charge blended strategy is used to facilitate the downsizing of the electrical machine, the internal combustion engine and the high voltage battery. An improved Equivalent Consumption Method has been used to manage the optimal power split within the powertrain as the PHEV traverses a range of different drivecycles. For a target CO2 value and drivecycle, results show that this approach can yield significant downsizing opportunities, with cost reductions on the order of 2%–9% being realizable.

The contemporary art of cost management methods during product development

NARCIS (Netherlands)

Wouters, M.; Morales, S.; Epstein, M.J.; Lee, J.Y.

2014-01-01

Purpose To provide an overview of research published in the management accounting literature on methods for cost management in new product development, such as a target costing, life cycle costing, component commonality, and modular design. Methodology/approach The structured literature search

Price-Transparency and Cost Accounting

Science.gov (United States)

Eakin, Cynthia; Fischer, Katrina

2015-01-01

Health care reform is directed toward improving access and quality while containing costs. An essential part of this is improvement of pricing models to more accurately reflect the costs of providing care. Transparent prices that reflect costs are necessary to signal information to consumers and producers. This information is central in a consumer-driven marketplace. The rapid increase in high deductible insurance and other forms of cost sharing incentivizes the search for price information. The organizational ability to measure costs across a cycle of care is an integral component of creating value, and will play a greater role as reimbursements transition to episode-based care, value-based purchasing, and accountable care organization models. This article discusses use of activity-based costing (ABC) to better measure the cost of health care. It describes examples of ABC in health care organizations and discusses impediments to adoption in the United States including cultural and institutional barriers. PMID:25862425

Price-Transparency and Cost Accounting

Directory of Open Access Journals (Sweden)

Peter Hilsenrath PhD

2015-04-01

Full Text Available Health care reform is directed toward improving access and quality while containing costs. An essential part of this is improvement of pricing models to more accurately reflect the costs of providing care. Transparent prices that reflect costs are necessary to signal information to consumers and producers. This information is central in a consumer-driven marketplace. The rapid increase in high deductible insurance and other forms of cost sharing incentivizes the search for price information. The organizational ability to measure costs across a cycle of care is an integral component of creating value, and will play a greater role as reimbursements transition to episode-based care, value-based purchasing, and accountable care organization models. This article discusses use of activity-based costing (ABC to better measure the cost of health care. It describes examples of ABC in health care organizations and discusses impediments to adoption in the United States including cultural and institutional barriers.

INDIRECT LABOR COSTS AND IMPLICATIONS FOR OVERHEAD ALLOCATION

OpenAIRE

Bea Chiang

2013-01-01

Cost accounting typically allocates indirect labor cost to cost object based on direct labor hours. The allocation process implicitly assumes that indirect labor costs vary proportionally with direct labor hours. The assumption of a linear relationship between indirect and direct labor is particularly suspicious at low production volume levels because there tends to be a fixed component in indirect labor. The linearity assumption is also challenged by recent increasing complexity of indirect ...

Cost estimating Brayton and Stirling engines

Science.gov (United States)

Fortgang, H. R.

1980-01-01

Brayton and Stirling engines were analyzed for cost and selling price for production quantities ranging from 1000 to 400,000 units per year. Parts and components were subjected to indepth scrutiny to determine optimum manufacturing processes coupled with make or buy decisions on materials and small parts. Tooling and capital equipment costs were estimated for each detail and/or assembly. For low annual production volumes, the Brayton engine appears to have a lower cost and selling price than the Stirling Engine. As annual production quantities increase, the Stirling becomes a lower cost engine than the Brayton. Both engines could benefit cost wise if changes were made in materials, design and manufacturing process as annual production quantities increase.

Executive Compensation and the Cost of Debt

NARCIS (Netherlands)

Kabir, Mohammed Rezaul; Li, Hao; Veld-Merkoulova, Yulia V.

2010-01-01

We examine how executive compensation affects the cost of debt financing. Analyzing CEO pay data from the UK, we find that debt-like and equity-like pay components have opposite effects on the cost of debt. An increase in defined benefit pensions is associated with lower bond yield spread, while an

IMHEX fuel cell repeat component manufacturing continuous improvement accomplishments

Energy Technology Data Exchange (ETDEWEB)

Jakaitis, L.A.; Petraglia, V.J.; Bryson, E.S. [M-C Power Corp., Burr Ridge, IL (United States)] [and others

1996-12-31

M-C Power is taking a power generation technology that has been proven in the laboratory and is making it a commercially competitive product. There are many areas in which this technology required scale up and refinement to reach the market entry goals for the IMHEX{reg_sign} molten carbonate fuel cell power plant. One of the primary areas that needed to be addressed was the manufacturing of the fuel cell stack. Up to this point, the fuel cell stack and associated components were virtually hand made for each system to be tested. M-C Power has now continuously manufactured the repeat components for three 250 kW stacks. M-C Power`s manufacturing strategy integrated both evolutionary and revolutionary improvements into its comprehensive commercialization effort. M-C Power`s objectives were to analyze and continuously improve stack component manufacturing and assembly techniques consistent with established specifications and commercial scale production requirements. Evolutionary improvements are those which naturally occur as the production rates are increased and experience is gained. Examples of evolutionary (learning curve) improvements included reducing scrap rates and decreasing raw material costs by buying in large quantities. Revolutionary improvements result in significant design and process changes to meet cost and performance requirements of the market entry system. Revolutionary changes often involve identifying new methods and developing designs to accommodate the new process. Based upon our accomplishments, M-C Power was able to reduce the cost of continuously manufactured fuel cell repeat components from the first to third 250 kW stack by 63%. This paper documents the continuous improvement accomplishments realized by M-C Power during IMHEX{reg_sign} fuel cell repeat component manufacturing.

Impact of comorbidities on hospitalization costs following hip fracture.

Science.gov (United States)

Nikkel, Lucas E; Fox, Edward J; Black, Kevin P; Davis, Charles; Andersen, Lucille; Hollenbeak, Christopher S

2012-01-04

Hip fractures are common in the elderly, and patients with hip fractures frequently have comorbid illnesses. Little is known about the relationship between comorbid illness and hospital costs or length of stay following the treatment of hip fracture in the United States. We hypothesized that specific individual comorbid illnesses and multiple comorbid illnesses would be directly related to the hospitalization costs and the length of stay for older patients following hip fracture. With use of discharge data from the 2007 Nationwide Inpatient Sample, 32,440 patients who were fifty-five years or older with an isolated, closed hip fracture were identified. Using generalized linear models, we estimated the impact of comorbidities on hospitalization costs and length of stay, controlling for patient, hospital, and procedure characteristics. Hypertension, deficiency anemias, and fluid and electrolyte disorders were the most common comorbidities. The patients had a mean of three comorbidities. Only 4.9% of patients presented without comorbidities. The average estimated cost in our reference patient was $13,805. The comorbidity with the largest increased hospitalization cost was weight loss or malnutrition, followed by pulmonary circulation disorders. Most other comorbidities significantly increased the cost of hospitalization. Compared with internal fixation of the hip fracture, hip arthroplasty increased hospitalization costs significantly. Comorbidities significantly affect the cost of hospitalization and length of stay following hip fracture in older Americans, even while controlling for other variables.

Nuclear Power Plant Module, NPP-1: Nuclear Power Cost Analysis.

Science.gov (United States)

Whitelaw, Robert L.

The purpose of the Nuclear Power Plant Modules, NPP-1, is to determine the total cost of electricity from a nuclear power plant in terms of all the components contributing to cost. The plan of analysis is in five parts: (1) general formulation of the cost equation; (2) capital cost and fixed charges thereon; (3) operational cost for labor,…

Econometric estimation of country-specific hospital costs

Directory of Open Access Journals (Sweden)

Murray Christopher JL

2003-02-01

Full Text Available Abstract Information on the unit cost of inpatient and outpatient care is an essential element for costing, budgeting and economic-evaluation exercises. Many countries lack reliable estimates, however. WHO has recently undertaken an extensive effort to collect and collate data on the unit cost of hospitals and health centres from as many countries as possible; so far, data have been assembled from 49 countries, for various years during the period 1973–2000. The database covers a total of 2173 country-years of observations. Large gaps remain, however, particularly for developing countries. Although the long-term solution is that all countries perform their own costing studies, the question arises whether it is possible to predict unit costs for different countries in a standardized way for short-term use. The purpose of the work described in this paper, a modelling exercise, was to use the data collected across countries to predict unit costs in countries for which data are not yet available, with the appropriate uncertainty intervals. The model presented here forms part of a series of models used to estimate unit costs for the WHO-CHOICE project. The methods and the results of the model, however, may be used to predict a number of different types of country-specific unit costs, depending on the purpose of the exercise. They may be used, for instance, to estimate the costs per bed-day at different capacity levels; the "hotel" component of cost per bed-day; or unit costs net of particular components such as drugs. In addition to reporting estimates for selected countries, the paper shows that unit costs of hospitals vary within countries, sometimes by an order of magnitude. Basing cost-effectiveness studies or budgeting exercises on the results of a study of a single facility, or even a small group of facilities, is likely to be misleading.

Switzerland's largest wood-pellet factory in Balsthal

International Nuclear Information System (INIS)

Stohler, F.

2004-01-01

This article describes how a small Swiss electricity utility has broken out of its traditional role in power generation and the distribution of electricity and gone into the production of wood pellets. The pellets, which are made from waste wood (sawdust) available from wood processing companies, are produced on a large scale in one of Europe's largest pellets production facilities. The boom in the use of wood pellets for heating purposes is discussed. The article discusses this unusual approach for a Swiss power utility, which also operates a wood-fired power station and is even involved in an incineration plant for household wastes. The markets being aimed for in Switzerland and in Europe are described, including modern low-energy-consumption housing projects. A further project is described that is to use waste wood available from a large wood processing facility planned in the utility's own region

Technical cost modelling for a novel semi-solid metal (SSM) casting processes for automotive component manufacturing

CSIR Research Space (South Africa)

Tlale, NS

2008-09-01

Full Text Available to predict the cost structure of a newly developed manufacturing process if it is to be considered by manufacturing enterprises for development to substitute a process that is in use. The costs of the new SSM technologies was established by technical cost...

Defense Strategies for Asymmetric Networked Systems with Discrete Components

Directory of Open Access Journals (Sweden)

Nageswara S. V. Rao

2018-05-01

Full Text Available We consider infrastructures consisting of a network of systems, each composed of discrete components. The network provides the vital connectivity between the systems and hence plays a critical, asymmetric role in the infrastructure operations. The individual components of the systems can be attacked by cyber and physical means and can be appropriately reinforced to withstand these attacks. We formulate the problem of ensuring the infrastructure performance as a game between an attacker and a provider, who choose the numbers of the components of the systems and network to attack and reinforce, respectively. The costs and benefits of attacks and reinforcements are characterized using the sum-form, product-form and composite utility functions, each composed of a survival probability term and a component cost term. We present a two-level characterization of the correlations within the infrastructure: (i the aggregate failure correlation function specifies the infrastructure failure probability given the failure of an individual system or network, and (ii the survival probabilities of the systems and network satisfy first-order differential conditions that capture the component-level correlations using multiplier functions. We derive Nash equilibrium conditions that provide expressions for individual system survival probabilities and also the expected infrastructure capacity specified by the total number of operational components. We apply these results to derive and analyze defense strategies for distributed cloud computing infrastructures using cyber-physical models.

Defense Strategies for Asymmetric Networked Systems with Discrete Components.

Science.gov (United States)

Rao, Nageswara S V; Ma, Chris Y T; Hausken, Kjell; He, Fei; Yau, David K Y; Zhuang, Jun

2018-05-03

We consider infrastructures consisting of a network of systems, each composed of discrete components. The network provides the vital connectivity between the systems and hence plays a critical, asymmetric role in the infrastructure operations. The individual components of the systems can be attacked by cyber and physical means and can be appropriately reinforced to withstand these attacks. We formulate the problem of ensuring the infrastructure performance as a game between an attacker and a provider, who choose the numbers of the components of the systems and network to attack and reinforce, respectively. The costs and benefits of attacks and reinforcements are characterized using the sum-form, product-form and composite utility functions, each composed of a survival probability term and a component cost term. We present a two-level characterization of the correlations within the infrastructure: (i) the aggregate failure correlation function specifies the infrastructure failure probability given the failure of an individual system or network, and (ii) the survival probabilities of the systems and network satisfy first-order differential conditions that capture the component-level correlations using multiplier functions. We derive Nash equilibrium conditions that provide expressions for individual system survival probabilities and also the expected infrastructure capacity specified by the total number of operational components. We apply these results to derive and analyze defense strategies for distributed cloud computing infrastructures using cyber-physical models.

[Direct and indirect costs of fractures due to osteoporosis in Austria].

Science.gov (United States)

Dimai, H-P; Redlich, K; Schneider, H; Siebert, U; Viernstein, H; Mahlich, J

2012-10-01

We examined the financial burden of osteoporosis in Austria. We took both direct and indirect costs into consideration. Direct costs encompass medical costs such as expenses for pharmaceuticals, inpatient and outpatient medical care costs, as well as other medical services (e.g., occupational therapies). Non-medical direct costs include transportation costs and medical devices (e.g., wheel chairs or crutches). Indirect costs refer to costs of productivity losses due to absence of work. Moreover, we included costs for early retirement and opportunity costs of informal care provided by family members. While there exist similar studies for other countries, this is the first comprehensive study for Austria. For our analysis, we combined data of official statistics, expert estimates as well as unique patient surveys that are currently conducted in the course of an international osteoporotic fracture study in Austria. Our estimation of the total annual costs in the year 2008 imposed by osteoporosis in Austria is 707.4 million €. The largest fraction of this amount is incurred by acute hospital treatment. Another significant figure, accounting for 29% of total costs, is the opportunity cost of informal care. The financial burden of osteoporosis in Austria is substantial. Economic evaluations of preventive and therapeutic interventions for the specific context of Austria are needed to inform health policy decision makers. © Georg Thieme Verlag KG Stuttgart · New York.

Analysis of embryo, cytoplasm and maternal effects on fatty acid components in soybean (Glycine max Merill.)

Institute of Scientific and Technical Information of China (English)

NING Hailong; LI Wenxia; LI Wenbin

2007-01-01

The quality of oil determined by the constituents and proportion of fatty acid components,and the understanding of heredity of fatty acid components are of importance to breeding good quality soybean varieties.Embryo,cytoplasmic and maternal effects and genotype×environment interaction effects for quality traits of soybean [Glycine max (L.) Merrill.] seeds were analyzed using a general genetic model for quantitative traits of seeds with parents,F1 and F2,of 20 crosses from a diallel mating design of five parents planted in the field in 2003 and 2004 in Harbin,China.The interaction effects of palmitic,stearic,and linoleic acid contents were larger than the genetic main effects,while the genetic main effects were equal to interaction effects for linolenic and oleic acid content.Among all kinds of genetic main effects,the embryo effects were the largest for palmitic,stearic,and linoleic acids,while the cytoplasm effects were the largest for oleic and linolenic acids.Among all kinds of interaction effects,the embryo interaction effects were the largest for fatty acids.The sum of additive and additive× environment effects were larger than that of dominance and dominance×environment effects for the linolenic acid content,but not for other quality traits.The general heritabilities were the main parts of heritabilities for palmitic and oleic acid contents,but the interaction was more important for stearic,linoleic,and linolenic acid contents.For the general heritability,maternal and cytoplasm heritabilities were the main components for palmitic,oleic,and linolenic acid contents.It was shown for the interaction heritabilities that the embryo interaction heritabilities were more important for oleic and linolenic acid contents,while the maternal interaction heritabilities were more important for linoleic acid content.Among selection response components,the maternal and cytoplasm general responses and/or interaction responses were more important for palmitic

Sunk cost investments and market information

DEFF Research Database (Denmark)

Sørensen, Hans Eibe; Stieglitz, Nils

2008-01-01

This paper extends the strategic management literature on how firms' sunk cost investments and market orientation mutually shapes firm performance. Using data from 314 manufacturing firms, we decompose firms' sunk cost investments into industry-specific resources and firm-specific resources...... and investigate their effect on firm performance. Our results suggest that the salient components of a firm's market orientation - i.e. customer orientation and competitor orientation - have different effects on firms' performance as well as moderate the relationship between a firm's sunk cost investments and its...

Monitoring extensions for component-based distributed software

NARCIS (Netherlands)

Diakov, N.K.; Papir, Z.; van Sinderen, Marten J.; Quartel, Dick

2000-01-01

This paper defines a generic class of monitoring extensions to component-based distributed enterprise software. Introducing a monitoring extension to a legacy application system can be very costly. In this paper, we identify the minimum support for application monitoring within the generic

Life cycle cost of biomass power plant: Monte Carlo simulation of investment

Directory of Open Access Journals (Sweden)

Odavić Petrana

2017-01-01

Full Text Available Assessment of life cycle cost is considered as an important instrument for designing and evaluating success of every project. The aim of this work is to determine the precise impact of the investment costs and future operating and maintenance costs of CHP biomass plant. By using the Monte Carlo simulation are determined variations in the settings and the possible impact on the investment risk. The results show that the investment is justified, thanks to the positive outcome of the net present value (NPV, internal rate of return (IRR and the payback period. The greatest impact on the variability of annual profits have operating costs, which have the highest coefficient of variation of 6.44% and the largest share. Variability of net present value of 4% is acceptable, and the investment is considered as stable.

Maintenance grouping strategy for multi-component systems with dynamic contexts

International Nuclear Information System (INIS)

Vu, Hai Canh; Do, Phuc; Barros, Anne; Bérenguer, Christophe

2014-01-01

This paper presents a dynamic maintenance grouping strategy for multi-component systems with both “positive” and “negative” economic dependencies. Positive dependencies are commonly due to setup cost whereas negative dependencies are related to shutdown cost. Actually, grouping maintenance activities can save part of the setup cost, but can also in the same time increase the shutdown cost. Until now, both types of dependencies have been jointly taken into account only for simple system structures as pure series. The first aim of this paper is to investigate the case of systems with any combination of basic structures (series, parallel or k-out-of n structures). A cost model and a heuristic optimization scheme are proposed since the optimization of maintenance grouping strategy for such multi-component systems leads to a NP-complete problem. Then the second objective is to propose a finite horizon (dynamic) model in order to optimize online the maintenance strategy in the presence of dynamic contexts (change of the environment, the working condition, the production process, etc). A numerical example of a 16-component system is finally introduced to illustrate the use and the advantages of the proposed approach in the maintenance optimization framework. - Highlights: • A dynamic grouping maintenance strategy for complex structure systems is proposed. • Impacts of the system structure on grouping maintenance are investigated. • A grouping approach based on the rolling horizon and GA algorithm is proposed. • Different dynamic contexts and their impacts on grouping maintenance are studied. • The proposed approach can help to update the maintenance planning in dynamic contexts

Application research of cost construction on radioactive waste management

International Nuclear Information System (INIS)

Gao Yanfeng; Bi Sheng; Liu Zhenhe

2009-01-01

This paper summarizes the theoretical basis systems for the cost component on radioactive waste management. Through the decomposition production of various types of project content, analysis of the cost elements of operating activities, study subjects at reason-able cost and expense. On the basis of the formation of radioactive waste management costs of the various operating structure Into, and established a comprehensive system of price system. (authors)

Process-Based Cost Modeling of Photonics Manufacture: The Cost Competitiveness of Monolithic Integration of a 1550-nm DFB Laser and an Electroabsorptive Modulator on an InP Platform

Science.gov (United States)

Fuchs, Erica R. H.; Bruce, E. J.; Ram, R. J.; Kirchain, Randolph E.

2006-08-01

The monolithic integration of components holds promise to increase network functionality and reduce packaging expense. Integration also drives down yield due to manufacturing complexity and the compounding of failures across devices. Consensus is lacking on the economically preferred extent of integration. Previous studies on the cost feasibility of integration have used high-level estimation methods. This study instead focuses on accurate-to-industry detail, basing a process-based cost model of device manufacture on data collected from 20 firms across the optoelectronics supply chain. The model presented allows for the definition of process organization, including testing, as well as processing conditions, operational characteristics, and level of automation at each step. This study focuses on the cost implications of integration of a 1550-nm DFB laser with an electroabsorptive modulator on an InP platform. Results show the monolithically integrated design to be more cost competitive over discrete component options regardless of production scale. Dominant cost drivers are packaging, testing, and assembly. Leveraging the technical detail underlying model projections, component alignment, bonding, and metal-organic chemical vapor deposition (MOCVD) are identified as processes where technical improvements are most critical to lowering costs. Such results should encourage exploration of the cost advantages of further integration and focus cost-driven technology development.

Customized overhead cranes for installation of India's largest 3.6m optical telescope at Devasthal, Nainital, India

Science.gov (United States)

Bangia, Tarun; Yadava, Shobhit; Kumar, Brijesh; Ghanti, A. S.; Hardikar, P. M.

2016-07-01

India's largest 3.6 m aperture optical telescope facility has been recently established at Devasthal site by Aryabhatta Research Institute of Observation Sciences (ARIES), an autonomous Institute under Department of Science and Technology, Government of India. The telescope is equipped with active optics and it is designed to be used for seeinglimited observations at visible and near-infrared wavelengths. A steel building with rotating cylindrical steel Dome was erected to house 3.6m telescope and its accessories at hilltop of Devasthal site. Customized cranes were essentially required inside the building as there were space constraints around the telescope building for operating big external heavy duty cranes from outside, transportation constraints in route for bringing heavy weight cranes, altitude of observatory, and sharp bends etc. to site. To meet the challenge of telescope installation from inside the telescope building by lifting components through its hatch, two Single Girder cranes and two Under Slung cranes of 10 MT capacity each were specifically designed and developed. All the four overhead cranes were custom built to achieve the goal of handling telescope mirror and its various components during installation and assembly. Overhead cranes were installed in limited available space inside the building and tested as per IS 3177. Cranes were equipped with many features like VVVFD compatibility, provision for tandem operation, digital load display, anti-collision mechanism, electrical interlocks, radio remote, low hook height and compact carriage etc. for telescope integration at site.

Motor and drive integration with passive components realised using the stator core

Energy Technology Data Exchange (ETDEWEB)

Garvey, S.D. [M. D. of Insight M Ltd., Aston Science Park, and Reader in Dynamics at Aston Univ. (United Kingdom)

2000-07-01

There is an inevitable trade-off between overall energy efficiency of any motor-drive pair and net capital cost. If the marginal cost of certain necessary components can be reduced, greater expenditure is possible in other areas with the potential of increased efficiency for a given cost. This paper investigates just such a proposition. (orig.)

Low-Cost Solar Water Heating Research and Development Roadmap

Energy Technology Data Exchange (ETDEWEB)

Hudon, K.; Merrigan, T.; Burch, J.; Maguire, J.

2012-08-01

The market environment for solar water heating technology has changed substantially with the successful introduction of heat pump water heaters (HPWHs). The addition of this energy-efficient technology to the market increases direct competition with solar water heaters (SWHs) for available energy savings. It is therefore essential to understand which segment of the market is best suited for HPWHs and focus the development of innovative, low-cost SWHs in the market segment where the largest opportunities exist. To evaluate cost and performance tradeoffs between high performance hot water heating systems, annual energy simulations were run using the program, TRNSYS, and analysis was performed to compare the energy savings associated with HPWH and SWH technologies to conventional methods of water heating.

Availability and cost functions for periodically inspected preventively maintained units

International Nuclear Information System (INIS)

Vaurio, J.K.

1999-01-01

Unavailability and cost rate functions are developed for components whose failures can occur randomly but they are detected only by periodic testing or inspections. If a failure occurs between consecutive inspections, the unit remains failed until the next inspection. Components are renewed by preventive maintenance periodically, or by repair or replacement after a failure, whichever occurs first (age-replacement). The model takes into account finite repair and maintenance durations as well as costs due to testing, repair, maintenance and lost production or accidents. For normally operating units the time-related penalty is loss of production. For standby safety equipment it is the expected cost of an accident that can happen when the component is down due to a dormant failure, repair or maintenance. The objective of maintenance optimization is to minimize the total cost rate by proper selection of two intervals, one for inspections and one for replacements. General conditions and techniques are developed for solving optimal test and maintenance intervals, with and without constraints on the production loss or accident rate. Insights are gained into how the optimal intervals depend on various cost parameters and reliability characteristics

Heavy steel casting components for power plants 'mega-components' made of high Cr-steels

Energy Technology Data Exchange (ETDEWEB)

Hanus, Reinhold [voestalpine Giesserei Linz GmbH, Linz (Austria)

2010-07-01

Steel castings of creep resistant steels play a key role in fossil fuel fired power plants for highly loaded components in the high and intermediate pressure section of the turbines. Inner and outer casings, valve casings, inlet connections and elbows are examples of such critical components. The most important characteristic in a power plant is the efficiency, which mainly drives the CO2-emission. As a consequence of steadily improving power plant efficiencies and ever stricter emission standards, steam parameters become more critical and the creep resistance of the cast materials must also be constantly improved. The foundries voestalpine Giesserei Linz and voestalpine Giesserei Traisen participated in the development of the new 9-10% Cr-steels for application up to 625 C/650 C and in the THERMIE project where Ni-base alloys for 700 C-power plants were developed. Beside the material development in the European research projects the commercial production had to be established for industrial processes and the newly developed materials have to be transferred from research into the commercial production of heavy cast components. After selecting the most promising alloy from the laboratory melts, welding tests were performed - mostly with matching electrodes also produced within COST/THERMIE. Base material and welds were investigated in respect of microstructure, creep resistance, mechanical properties and weldability. Heat treatment investigations were also necessary for optimization of the mechanical properties. Based on the results of these studies, pilot components and plates for testing welding processes were cast in order to verify the castability and weldability of larger parts and to make any necessary adjustments to chemical composition, heat treatment or welding parameters. Parallel to the ongoing creep tests within COST/THERMIE-program, the newly developed steel grades were introduced into the commercial production of large components. This involved finding

On risk-based operation and maintenance of offshore wind turbine components

DEFF Research Database (Denmark)

Nielsen, Jannie Jessen; Sørensen, John Dalsgaard

2011-01-01

Operation and maintenance are significant contributors to the cost of energy for offshore wind turbines. Optimal planning could rationally be based on Bayesian pre-posterior decision theory, and all costs through the lifetime of the structures should be included. This paper contains a study...... of a generic case where the costs are evaluated for a single wind turbine with a single component. Costs due to inspections, repairs, and lost production are included in the model. The costs are compared for two distinct maintenance strategies, namely with and without inclusion of periodic imperfect...

The impact of new technology on compact disposal costs

International Nuclear Information System (INIS)

Arrowsmith, H.W.; Zidow, T.M.

1989-01-01

The cost of disposal of low-level waste (LLW) has increased dramatically since the 1960s. In the '60s waste was put into the ground for a fee of less than $1/ft 3 in truck-size quantities. Fees for the same burial services today begin in the $30/ft 3 range and increase rapidly from that level. Although the user fees associated with compacts will clearly exceed $100/ft 3 , improved operating techniques by the generators will reduce the amount of waste produced. Current estimates suggest this reduction will drive the per-cubic-foot cost of disposal over the $200 mark. Technology is the only solution to this predicament. While costs already incurred will contribute to the fixed portion of the base user fees, the means to minimize the variable portion of the fees in now at hand. This variable portion results from on-site processing costs, waste form stability enhancements, and ongoing disposal unit construction. Technology exists to minimize volume through ultra compaction and selective incineration, greatly reducing the ongoing disposal unit construction requirements. Vitrification of incinerator residue provides waste form stability far in excess of that provided by concrete overpacks. As overpacks represent the second largest material cost at an engineered barrier facility, the potential for cost savings is substantial

The global diversion of pharmaceutical drugs. India: the third largest illicit opium producer?

Science.gov (United States)

Paoli, Letizia; Greenfield, Victoria A; Charles, Molly; Reuter, Peter

2009-03-01

This paper explores India's role in the world illicit opiate market, particularly its role as a producer. India, a major illicit opiate consumer, is also the sole licensed exporter of raw opium: this unique status may be enabling substantial diversion to the illicit market. Participant observation and interviews were carried out at eight different sites. Information was also drawn from all standard secondary sources and the analysis of about 180 drug-related criminal proceedings reviewed by Indian High Courts and the Supreme Court from 1985 to 2001. Diversion from licit opium production takes place on such a large scale that India may be the third largest illicit opium producer after Afghanistan and Burma. With the possible exceptions of 2005 and 2006, 200-300 tons of India's opium may be diverted yearly. After estimating India's opiate consumption on the basis of UN-reported prevalence estimates, we find that diversion from licit production might have satisfied a quarter to more than a third of India's illicit opiate demand to 2004. India is not only among the world's largest consumer of illicit opiates but also one of the largest illicit opium producers. In contrast to all other illicit producers, India owes the latter distinction not to blatantly illicit cultivation but to diversion from licit cultivation. India's experience suggests the difficulty of preventing substantial leakage, even in a relatively well-governed nation.

Future trends of light-water reactor fuel-cycle costs

International Nuclear Information System (INIS)

Tamiya, S.; Otomo, T.; Meguro, T.

1977-01-01

In past cost estimates, the main fuel-cycle components were mining and milling, uranium enrichment and fuel fabrication, and the reprocessing charge deemed to be recovered by plutonium credit. Since the oil crisis, all costs of fuel-cycle components have increased as well as construction costs of power stations. Recent analysis shows that costs in the back-end of the fuel cycle are much higher than those anticipated several years ago, although their contribution to the nuclear electricity generating cost would be small. This situation has now changed but there are still many uncertainties, i.e. regulatory requirements for reprocessing plants concerning safety, safeguards, environmental protection and high-level waste management. Thus it is more difficult to estimate overall investments and, therefore, the costs of the back-end of the fuel-cycle sector. This paper reviews the future trend of nuclear fuel-cycle costs of LWRs, based on recent analysis; and those factors which affect fuel-cycle costs are discussed. To reduce the uncertainties of the cost estimates as soon as possible, international discussion is necessary on items such as the treatment and disposal of high-level radioactive wastes, siting reprocessing plants, physical protection of plutonium, and the effects of plutonium on the environment. (author)

2015 Cost of Wind Energy Review

Energy Technology Data Exchange (ETDEWEB)

Mone, Christopher; Hand, Maureen; Bolinger, Mark; Rand, Joseph; Heimiller, Donna; Ho, Jonathan

2017-04-05

This report uses representative commercial projects to estimate the levelized cost of energy (LCOE) for both land-based and offshore wind plants in the United States for 2015. Scheduled to be published on an annual basis, the analysis relies on both market and modeled data to maintain an up-to-date understanding of wind generation cost trends and drivers. It is intended to provide insight into current component-level costs and a basis for understanding variability in the LCOE across the industry. Data and tools developed by the National Renewable Energy Laboratory (NREL) are used in this analysis to inform wind technology cost projections, goals, and improvement opportunities.

2014 Cost of Wind Energy Review

Energy Technology Data Exchange (ETDEWEB)

Mone, Christopher [National Renewable Energy Lab. (NREL), Golden, CO (United States); Stehly, Tyler [National Renewable Energy Lab. (NREL), Golden, CO (United States); Maples, Ben [National Renewable Energy Lab. (NREL), Golden, CO (United States); Settle, Edward [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2015-10-01

This report uses representative commercial projects to estimate the levelized cost of energy (LCOE) for both land-based and offshore wind plants in the United States for 2014. Scheduled to be published on an annual basis, the analysis relies on both market and modeled data to maintain an up-to-date understanding of wind generation cost trends and drivers. It is intended to provide insight into current component-level costs and a basis for understanding variability in the LCOE across the industry. Data and tools developed by the National Renewable Energy Laboratory (NREL) are used in this analysis to inform wind technology cost projections, goals, and improvement opportunities.

Parametric Cost Estimates for an International Competitive Edge

International Nuclear Information System (INIS)

Murphy, L.T.; Hickey, M.

2006-01-01

This paper summarizes the progress to date by CH2M HILL and the UKAEA in development of a parametric modelling capability for estimating the costs of large nuclear decommissioning projects in the United Kingdom (UK) and Europe. The ability to successfully apply parametric cost estimating techniques will be a key factor to commercial success in the UK and European multi-billion dollar waste management, decommissioning and environmental restoration markets. The most useful parametric models will be those that incorporate individual components representing major elements of work: reactor decommissioning, fuel cycle facility decommissioning, waste management facility decommissioning and environmental restoration. Models must be sufficiently robust to estimate indirect costs and overheads, permit pricing analysis and adjustment, and accommodate the intricacies of international monetary exchange, currency fluctuations and contingency. The development of a parametric cost estimating capability is also a key component in building a forward estimating strategy. The forward estimating strategy will enable the preparation of accurate and cost-effective out-year estimates, even when work scope is poorly defined or as yet indeterminate. Preparation of cost estimates for work outside the organizations current sites, for which detailed measurement is not possible and historical cost data does not exist, will also be facilitated. (authors)

Cost considerations for long-term ecological monitoring

Science.gov (United States)

Caughlan, L.; Oakley, K.L.

2001-01-01

For an ecological monitoring program to be successful over the long-term, the perceived benefits of the information must justify the cost. Financial limitations will always restrict the scope of a monitoring program, hence the program’s focus must be carefully prioritized. Clearly identifying the costs and benefits of a program will assist in this prioritization process, but this is easier said than done. Frequently, the true costs of monitoring are not recognized and are, therefore, underestimated. Benefits are rarely evaluated, because they are difficult to quantify. The intent of this review is to assist the designers and managers of long-term ecological monitoring programs by providing a general framework for building and operating a cost-effective program. Previous considerations of monitoring costs have focused on sampling design optimization. We present cost considerations of monitoring in a broader context. We explore monitoring costs, including both budgetary costs, what dollars are spent on, and economic costs, which include opportunity costs. Often, the largest portion of a monitoring program budget is spent on data collection, and other, critical aspects of the program, such as scientific oversight, training, data management, quality assurance, and reporting, are neglected. Recognizing and budgeting for all program costs is therefore a key factor in a program’s longevity. The close relationship between statistical issues and cost is discussed, highlighting the importance of sampling design, replication and power, and comparing the costs of alternative designs through pilot studies and simulation modeling. A monitoring program development process that includes explicit checkpoints for considering costs is presented. The first checkpoint occurs during the setting of objectives and during sampling design optimization. The last checkpoint occurs once the basic shape of the program is known, and the costs and benefits, or alternatively the cost

Strategic cost management as the main component of strategic management accounting

OpenAIRE

Ходзицька, Валентина Василівна

2013-01-01

The influence of cost management on making management decisions and functioning of the system of strategic management accounting was analyzed in the paper. The main aspects of the influence of strategic management accounting on making effective management decisions in the system of integrated management of business entities were highlighted. The scope of the organizational activity, covered by the strategic management accounting was described.The paper shows the orientation of strategic manag...

Impact of pharmacist’s interventions on cost of drug therapy in intensive care unit. Pharmacy

Directory of Open Access Journals (Sweden)

Saokaew S

2009-06-01

antibiotic use accounted for the largest economic impact (1,958.61 USD. Conclusions: Although the statistical was not significant, having a pharmacist participated in ICU patient care team tend to reduced overall drug cost, cost saving, and cost avoidance. The largest cost impact and intervention requirement involved antibiotic use.

The 100-C-7 Remediation Project. An Overview of One of DOE's Largest Remediation Projects - 13260

International Nuclear Information System (INIS)

Post, Thomas C.; Strom, Dean; Beulow, Laura

2013-01-01

The U.S. Department of Energy Richland Operations Office (RL), U.S. Environmental Protection Agency (EPA) and Washington Closure Hanford LLC (WCH) completed remediation of one of the largest waste sites in the U.S. Department of Energy complex. The waste site, 100-C-7, covers approximately 15 football fields and was excavated to a depth of 85 feet (groundwater). The project team removed a total of 2.3 million tons of clean and contaminated soil, concrete debris, and scrap metal. 100-C-7 lies in Hanford's 100 B/C Area, home to historic B and C Reactors. The waste site was excavated in two parts as 100-C-7 and 100-C-7:1. The pair of excavations appear like pit mines. Mining engineers were hired to design their tiered sides, with safety benches every 17 feet and service ramps which allowed equipment access to the bottom of the excavations. The overall cleanup project was conducted over a span of almost 10 years. A variety of site characterization, excavation, load-out and sampling methodologies were employed at various stages of remediation. Alternative technologies were screened and evaluated during the project. A new method for cost effectively treating soils was implemented - resulting in significant cost savings. Additional opportunities for minimizing waste streams and recycling were identified and effectively implemented by the project team. During the final phase of cleanup the project team applied lessons learned throughout the entire project to address the final, remaining source of chromium contamination. The C-7 cleanup now serves as a model for remediating extensive deep zone contamination sites at Hanford. (authors)

Entropy, exergy, and cost analyses of solar driven cogeneration systems using supercritical CO_2 Brayton cycles and MEE-TVC desalination system

International Nuclear Information System (INIS)

Kouta, Amine; Al-Sulaiman, Fahad; Atif, Maimoon; Marshad, Saud Bin

2016-01-01

Highlights: • The entropy, exergy, and cost analyses for two solar cogeneration configurations are conducted. • The recompression cogeneration cycle achieves lower LCOE as compared to the regeneration cogeneration cycle. • The solar tower is the largest contributor to entropy generation in both configurations reaching almost 80%. • The specific entropy generation in the MEE-TVC decreases with decreasing the fraction. - Abstract: In this study, performance and cost analyses are conducted for a solar power tower integrated with supercritical CO_2 (sCO_2) Brayton cycles for power production and a multiple effect evaporation with a thermal vapor compression (MEE-TVC) desalination system for water production. The study is performed for two configurations based on two different supercritical cycles: the regeneration and recompression sCO_2 Brayton cycles. A two-tank molten salt storage is utilized to ensure a uniform operation throughout the day. From the entropy analysis, it was shown that the solar tower is the largest contributor to entropy generation in both configurations, reaching almost 80% from the total entropy generation, followed by the MEE-TVC desalination system, and the sCO_2 power cycle. The entropy generation in the two-tank thermal storage is negligible, around 0.3% from the total generation. In the MEE-TVC system the highest contributing component is the steam jet ejector, which is varying between 50% and 60% for different number of effects. The specific entropy generation in the MEE-TVC decreases as the fraction of the input heat to the desalination system decreases; while the specific entropy generation of the sCO_2 cycle remains constant. The cost analysis performed for different regions in Saudi Arabia and the findings reveal that the regions characterized by the highest average solar irradiation throughout the year have the lowest LCOE and LCOW values. The region achieving the lowest cost is Yanbu, followed by Khabt Al-Ghusn in the second

Hospital costs of ischemic stroke and TIA in the Netherlands.

Science.gov (United States)

Buisman, Leander R; Tan, Siok Swan; Nederkoorn, Paul J; Koudstaal, Peter J; Redekop, William K

2015-06-02

There have been no ischemic stroke costing studies since major improvements were implemented in stroke care. We therefore determined hospital resource use and costs of ischemic stroke and TIA in the Netherlands for 2012. We conducted a retrospective cost analysis using individual patient data from a national diagnosis-related group registry. We analyzed 4 subgroups: inpatient ischemic stroke, inpatient TIA, outpatient ischemic stroke, and outpatient TIA. Costs of carotid endarterectomy and costs of an extra follow-up visit were also estimated. Unit costs were based on reference prices from the Dutch Healthcare Insurance Board and tariffs provided by the Dutch Healthcare Authority. Linear regression analysis was used to examine the association between hospital costs and various patient and hospital characteristics. A total of 35,903 ischemic stroke and 21,653 TIA patients were included. Inpatient costs were €5,328 ($6,845) for ischemic stroke and €2,470 ($3,173) for TIA. Outpatient costs were €495 ($636) for ischemic stroke and €587 ($754) for TIA. Costs of carotid endarterectomy were €6,836 ($8,783). Costs of inpatient days were the largest contributor to hospital costs. Age, hospital type, and region were strongly associated with hospital costs. Hospital costs are higher for inpatients and ischemic strokes compared with outpatients and TIAs, with length of stay (LOS) the most important contributor. LOS and hospital costs have substantially declined over the last 10 years, possibly due to improved hospital stroke care and efficient integrated stroke services. © 2015 American Academy of Neurology.

Optical components for the Nova laser

International Nuclear Information System (INIS)

Wallerstein, E.P.; Baker, P.C.; Brown, N.J.

1982-01-01

In addition to its other characteristics, the Nova Laser Fusion facility may well be the largest precision optical project ever undertaken. Moreover, during the course of construction, concurrent research and development has been successfully conducted, and has resulted in significant advances in various technical areas, including manufacturing efficiency. Although assembly of the first two beams of Nova is just commencing, the optical production, including construction of the special facilities required for many of the components, has been underway for over three years, and many phases of the optical manufacturing program for the first 10 beams will be completed within the next two years. On the other hand, new requirements for second and third harmonic generation have created the need to initiate new research and development. This work has been accomplished through the enormous cooperation DOE/LLNL has received from commercial industry on this project. In many cases, industry, where much of the optical component research and development and virtually all of the manufacturing is being done, has made substantial investment of its own funds in facilities, equipment, and research and development, in addition to those supplied by DOE/LLNL

The scope of additive manufacturing in cryogenics, component design, and applications

Science.gov (United States)

Stautner, W.; Vanapalli, S.; Weiss, K.-P.; Chen, R.; Amm, K.; Budesheim, E.; Ricci, J.

2017-12-01

Additive manufacturing techniques using composites or metals are rapidly gaining momentum in cryogenic applications. Small or large, complex structural components are now no longer limited to mere design studies but can now move into the production stream thanks to new machines on the market that allow for light-weight, cost optimized designs with short turnaround times. The potential for cost reductions from bulk materials machined to tight tolerances has become obvious. Furthermore, additive manufacturing opens doors and design space for cryogenic components that to date did not exist or were not possible in the past, using bulk materials along with elaborate and expensive machining processes, e.g. micromachining. The cryogenic engineer now faces the challenge to design toward those new additive manufacturing capabilities. Additionally, re-thinking designs toward cost optimization and fast implementation also requires detailed knowledge of mechanical and thermal properties at cryogenic temperatures. In the following we compile the information available to date and show a possible roadmap for additive manufacturing applications of parts and components typically used in cryogenic engineering designs.

Least-cost failure diagnosis in uncertain reliability systems

International Nuclear Information System (INIS)

Cox, Louis Anthony; Chiu, Steve Y.; Sun Xiaorong

1996-01-01

In many textbook solutions, for systems failure diagnosis problems studied using reliability theory and artificial intelligence, the prior probabilities of different failure states can be estimated and used to guide the sequential search for failed components after the whole system fails. In practice, however, both the component failure probabilities and the structure function of the system being examined--i.e., the mapping between the states of its components and the state of the system--may not be known with certainty. At best:, the probabilities of different hypothesized system descriptions, each specifying the component failure probabilities and the system's structure function, may be known to a useful approximation, perhaps based on sample data and previous experience. Cost-effective diagnosis of the system's failure state is then a challenging problem. Although the probabilities of component failures are aleatory, uncertainties about these probabilities and about the system structure function are epistemic. This paper examines how to make best use of both epistemic prior probabilities for system descriptions and the information gleaned from costly inspections of component states after the system fails, to minimize the average cost of identifying the failure state. Two approaches are introduced for systems dominated by aleatory uncertainties, one motivated by information theory and the other based on the idea of trying to prove a hypothesis about the identity of the failure state as efficiently as possible. While the general problem of cost-effective failure diagnosis is computationally intractable (NP-hard), both heuristics provide useful approximations on small to moderate sized problems and optimal results for certain common types of reliability systems, including series, parallel, parallel-series, and k-out-of-n systems. A hybrid heuristic that adaptively chooses which heuristic to apply next after any sequence of observations (component test results

Regional disparity and cost-effective SO2 pollution control in China: A case study in 5 mega-cities

International Nuclear Information System (INIS)

Kanada, Momoe; Dong, Liang; Fujita, Tsuyoshi; Fujii, Minoru; Inoue, Tsuyoshi; Hirano, Yujiro; Togawa, Takuya; Geng, Yong

2013-01-01

With rapid development, increasing sulfur dioxide (SO 2 ) emission becomes a key environmental issue in China. To respond to this challenge, the Chinese government established a top-down scheme to reduce its SO 2 emissions. However, regional disparity and the associated cost differences brought uncertainties to the policy effectiveness and efficiency. Few studies focus on this field. Therefore, this study tries to fill such a gap by investigating the differences of SO 2 emissions, reduction potential, and cost-effectiveness through use of the GAINS-China model in five mega-cities in China, namely, Beijing, Shanghai, Tianjin, Chongqing, and Hong Kong. A scenario analysis approach is employed, focusing on two technologies named flue gas desulfurization (FGD) and limestone injection (LINJ). Results demonstrated that a large SO 2 reduction potential exists, as well as a great disparity, among the five mega-cities. Chongqing had the largest reduction potential with lowest unit cost, while Beijng and Hong Kong showed the lowest reduction potential with higher unit cost. In Beijing and Shanghai, FGD and LINJ in the power generation sector had the larger reduction potential with the highest cost-effectiveness. However, in Chongqing, the industry sectors also had large reduction potentials. Finally, appropriate SO 2 control strategies and policies are raised by considering the local realities. - Highlights: • The cost-effectiveness of SO 2 control policy was analyzed in five mega-cities in China. • Reduction potential and cost-effectiveness were closely linked to regional disparity. • Beijing and Hong Kong showed lower reduction potential and higher marginal reduction cost. • Chongqing showed the largest reduction potential and the lowest marginal reduction cost

Retrospective analysis of drug utilization, health care resource use, and costs associated with IFN therapy for adjuvant treatment of malignant melanoma

Directory of Open Access Journals (Sweden)

Zhang Y

2015-07-01

demonstrated the largest difference between IFN-treated and observation patients. Outpatient service costs for IFN-treated patients were $32,414±$2,498, over three times greater than those for observation patients ($10,556±$1,128; P<0.0001.Conclusion: The majority of adjuvant melanoma patients in this study was treated with observation versus IFN treatment. Among those who attempted IFN treatment, most could not complete the recommended course of therapy. Health care costs were significantly greater for patients treated with IFN, with the greatest differences being for melanoma-related medical cost components. These findings illustrate the significant economic burden borne by adjuvant melanoma patients and their health insurers.Keywords: adjuvant melanoma, interferon, claims data, cost analysis