WorldWideScience

Sample records for large systems knowledge-based

  1. Large-scale computer networks and the future of legal knowledge-based systems

    NARCIS (Netherlands)

    Leenes, R.E.; Svensson, Jorgen S.; Hage, J.C.; Bench-Capon, T.J.M.; Cohen, M.J.; van den Herik, H.J.

    1995-01-01

    In this paper we investigate the relation between legal knowledge-based systems and large-scale computer networks such as the Internet. On the one hand, researchers of legal knowledge-based systems have claimed huge possibilities, but despite the efforts over the last twenty years, the number of

  2. Validation Of Critical Knowledge-Based Systems

    Science.gov (United States)

    Duke, Eugene L.

    1992-01-01

    Report discusses approach to verification and validation of knowledge-based systems. Also known as "expert systems". Concerned mainly with development of methodologies for verification of knowledge-based systems critical to flight-research systems; e.g., fault-tolerant control systems for advanced aircraft. Subject matter also has relevance to knowledge-based systems controlling medical life-support equipment or commuter railroad systems.

  3. Knowledge based systems for intelligent robotics

    Science.gov (United States)

    Rajaram, N. S.

    1982-01-01

    It is pointed out that the construction of large space platforms, such as space stations, has to be carried out in the outer space environment. As it is extremely expensive to support human workers in space for large periods, the only feasible solution appears to be related to the development and deployment of highly capable robots for most of the tasks. Robots for space applications will have to possess characteristics which are very different from those needed by robots in industry. The present investigation is concerned with the needs of space robotics and the technologies which can be of assistance to meet these needs, giving particular attention to knowledge bases. 'Intelligent' robots are required for the solution of arising problems. The collection of facts and rules needed for accomplishing such solutions form the 'knowledge base' of the system.

  4. Distributed, cooperating knowledge-based systems

    Science.gov (United States)

    Truszkowski, Walt

    1991-01-01

    Some current research in the development and application of distributed, cooperating knowledge-based systems technology is addressed. The focus of the current research is the spacecraft ground operations environment. The underlying hypothesis is that, because of the increasing size, complexity, and cost of planned systems, conventional procedural approaches to the architecture of automated systems will give way to a more comprehensive knowledge-based approach. A hallmark of these future systems will be the integration of multiple knowledge-based agents which understand the operational goals of the system and cooperate with each other and the humans in the loop to attain the goals. The current work includes the development of a reference model for knowledge-base management, the development of a formal model of cooperating knowledge-based agents, the use of testbed for prototyping and evaluating various knowledge-based concepts, and beginning work on the establishment of an object-oriented model of an intelligent end-to-end (spacecraft to user) system. An introductory discussion of these activities is presented, the major concepts and principles being investigated are highlighted, and their potential use in other application domains is indicated.

  5. Knowledge-based diagnosis for aerospace systems

    Science.gov (United States)

    Atkinson, David J.

    1988-01-01

    The need for automated diagnosis in aerospace systems and the approach of using knowledge-based systems are examined. Research issues in knowledge-based diagnosis which are important for aerospace applications are treated along with a review of recent relevant research developments in Artificial Intelligence. The design and operation of some existing knowledge-based diagnosis systems are described. The systems described and compared include the LES expert system for liquid oxygen loading at NASA Kennedy Space Center, the FAITH diagnosis system developed at the Jet Propulsion Laboratory, the PES procedural expert system developed at SRI International, the CSRL approach developed at Ohio State University, the StarPlan system developed by Ford Aerospace, the IDM integrated diagnostic model, and the DRAPhys diagnostic system developed at NASA Langley Research Center.

  6. Current trends on knowledge-based systems

    CERN Document Server

    Valencia-García, Rafael

    2017-01-01

    This book presents innovative and high-quality research on the implementation of conceptual frameworks, strategies, techniques, methodologies, informatics platforms and models for developing advanced knowledge-based systems and their application in different fields, including Agriculture, Education, Automotive, Electrical Industry, Business Services, Food Manufacturing, Energy Services, Medicine and others. Knowledge-based technologies employ artificial intelligence methods to heuristically address problems that cannot be solved by means of formal techniques. These technologies draw on standard and novel approaches from various disciplines within Computer Science, including Knowledge Engineering, Natural Language Processing, Decision Support Systems, Artificial Intelligence, Databases, Software Engineering, etc. As a combination of different fields of Artificial Intelligence, the area of Knowledge-Based Systems applies knowledge representation, case-based reasoning, neural networks, Semantic Web and TICs used...

  7. NASDA knowledge-based network planning system

    Science.gov (United States)

    Yamaya, K.; Fujiwara, M.; Kosugi, S.; Yambe, M.; Ohmori, M.

    1993-01-01

    One of the SODS (space operation and data system) sub-systems, NP (network planning) was the first expert system used by NASDA (national space development agency of Japan) for tracking and control of satellite. The major responsibilities of the NP system are: first, the allocation of network and satellite control resources and, second, the generation of the network operation plan data (NOP) used in automated control of the stations and control center facilities. Up to now, the first task of network resource scheduling was done by network operators. NP system automatically generates schedules using its knowledge base, which contains information on satellite orbits, station availability, which computer is dedicated to which satellite, and how many stations must be available for a particular satellite pass or a certain time period. The NP system is introduced.

  8. Knowledge-based information systems in practice

    CERN Document Server

    Jain, Lakhmi; Watada, Junzo; Howlett, Robert

    2015-01-01

    This book contains innovative research from leading researchers who presented their work at the 17th International Conference on Knowledge-Based and Intelligent Information and Engineering Systems, KES 2013, held in Kitakyusha, Japan, in September 2013. The conference provided a competitive field of 236 contributors, from which 38 authors expanded their contributions and only 21 published. A plethora of techniques and innovative applications are represented within this volume. The chapters are organized using four themes. These topics include: data mining, knowledge management, advanced information processes and system modelling applications. Each topic contains multiple contributions and many offer case studies or innovative examples. Anyone that wants to work with information repositories or process knowledge should consider reading one or more chapters focused on their technique of choice. They may also benefit from reading other chapters to assess if an alternative technique represents a more suitable app...

  9. A knowledge based system for plant diagnosis

    International Nuclear Information System (INIS)

    Motoda, H.; Yamada, N.; Yoshida, K.

    1984-01-01

    A knowledge based system for plant diagnosis is proposed in which both event-oriented and function-oriented knowledge are used. For the proposed system to be of practical use, these two types of knowledge are represented by mutually nested four frames, i.e. the component, causality, criteriality, and simulator frames, and production rules. The system provides fast inference capability for use as both a production system and a formal reasoning system, with uncertainty of knowledge taken into account in the former. Event-oriented knowledge is used in both diagnosis and guidance and function-oriented knowledge, in diagnosis only. The inference capability required is forward chaining in the former and resolution in the latter. The causality frame guides in the use of event-oriented knowledge, whereas the criteriality frame does so for function-oriented knowledge. Feedback nature of the plant requires the best first search algorithm that uses histories in the resolution process. The inference program is written in Lisp and the plant simulator and the process I/O control programs in Fortran. Fast data transfer between these two languages is realized by enhancing the memory management capability of Lisp to control the numerical data in the global memory. Simulation applications to a BWR plant demonstrated its diagnostic capability

  10. IGENPRO knowledge-based operator support system

    International Nuclear Information System (INIS)

    Morman, J. A.

    1998-01-01

    Research and development is being performed on the knowledge-based IGENPRO operator support package for plant transient diagnostics and management to provide operator assistance during off-normal plant transient conditions. A generic thermal-hydraulic (T-H) first-principles approach is being implemented using automated reasoning, artificial neural networks and fuzzy logic to produce a generic T-H system-independent/plant-independent package. The IGENPRO package has a modular structure composed of three modules: the transient trend analysis module PROTREN, the process diagnostics module PRODIAG and the process management module PROMANA. Cooperative research and development work has focused on the PRODIAG diagnostic module of the IGENPRO package and the operator training matrix of transients used at the Braidwood Pressurized Water Reactor station. Promising simulator testing results with PRODIAG have been obtained for the Braidwood Chemical and Volume Control System (CVCS), and the Component Cooling Water System. Initial CVCS test results have also been obtained for the PROTREN module. The PROMANA effort also involves the CVCS. Future work will be focused on the long-term, slow and mild degradation transients where diagnoses of incipient T-H component failure prior to forced outage events is required. This will enhance the capability of the IGENPRO system as a predictive maintenance tool for plant staff and operator support

  11. KBGIS-2: A knowledge-based geographic information system

    Science.gov (United States)

    Smith, T.; Peuquet, D.; Menon, S.; Agarwal, P.

    1986-01-01

    The architecture and working of a recently implemented knowledge-based geographic information system (KBGIS-2) that was designed to satisfy several general criteria for the geographic information system are described. The system has four major functions that include query-answering, learning, and editing. The main query finds constrained locations for spatial objects that are describable in a predicate-calculus based spatial objects language. The main search procedures include a family of constraint-satisfaction procedures that use a spatial object knowledge base to search efficiently for complex spatial objects in large, multilayered spatial data bases. These data bases are represented in quadtree form. The search strategy is designed to reduce the computational cost of search in the average case. The learning capabilities of the system include the addition of new locations of complex spatial objects to the knowledge base as queries are answered, and the ability to learn inductively definitions of new spatial objects from examples. The new definitions are added to the knowledge base by the system. The system is currently performing all its designated tasks successfully, although currently implemented on inadequate hardware. Future reports will detail the performance characteristics of the system, and various new extensions are planned in order to enhance the power of KBGIS-2.

  12. Irrelevance Reasoning in Knowledge Based Systems

    Science.gov (United States)

    Levy, A. Y.

    1993-01-01

    This dissertation considers the problem of reasoning about irrelevance of knowledge in a principled and efficient manner. Specifically, it is concerned with two key problems: (1) developing algorithms for automatically deciding what parts of a knowledge base are irrelevant to a query and (2) the utility of relevance reasoning. The dissertation describes a novel tool, the query-tree, for reasoning about irrelevance. Based on the query-tree, we develop several algorithms for deciding what formulas are irrelevant to a query. Our general framework sheds new light on the problem of detecting independence of queries from updates. We present new results that significantly extend previous work in this area. The framework also provides a setting in which to investigate the connection between the notion of irrelevance and the creation of abstractions. We propose a new approach to research on reasoning with abstractions, in which we investigate the properties of an abstraction by considering the irrelevance claims on which it is based. We demonstrate the potential of the approach for the cases of abstraction of predicates and projection of predicate arguments. Finally, we describe an application of relevance reasoning to the domain of modeling physical devices.

  13. Knowledge-based systems for power management

    Science.gov (United States)

    Lollar, L. F.

    1992-01-01

    NASA-Marshall's Electrical Power Branch has undertaken the development of expert systems in support of further advancements in electrical power system automation. Attention is given to the features (1) of the Fault Recovery and Management Expert System, (2) a resource scheduler or Master of Automated Expert Scheduling Through Resource Orchestration, and (3) an adaptive load-priority manager, or Load Priority List Management System. The characteristics of an advisory battery manager for the Hubble Space Telescope, designated the 'nickel-hydrogen expert system', are also noted.

  14. Knowledge-based methods for control systems

    International Nuclear Information System (INIS)

    Larsson, J.E.

    1992-01-01

    This thesis consists of three projects which combine artificial intelligence and control. The first part describes an expert system interface for system identification, using the interactive identification program Idpac. The interface works as an intelligent help system, using the command spy strategy. It contains a multitude of help system ideas. The concept of scripts is introduced as a data structure used to describe the procedural part of the knowledge in the interface. Production rules are used to represent diagnostic knowledge. A small knowledge database of scripts and rules has been developed and an example run is shown. The second part describes an expert system for frequency response analysis. This is one of the oldest and most widely used methods to determine the dynamics of a stable linear system. Though quite simple, it requires knowledge and experience of the user, in order to produce reliable results. The expert system is designed to help the user in performing the analysis. It checks whether the system is linear, finds the frequency and amplitude ranges, verifies the results, and, if errors should occur, tries to give explanation and remedies for them. The third part describes three diagnostic methods for use with industrial processes. They are measurement validation, i.e., consistency checking of sensor and measurement values using any redundancy of instrumentation; alarm analysis, i.e. analysis of multiple alarm situations to find which alarms are directly connected to primary faults and which alarms are consequential effects of the primary ones; and fault diagnosis, i.e., a search for the causes of and remedies for faults. The three methods use multilevel flow models, (MFM), to describe the target process. They have been implemented in the programming tool G2, and successfully tested on two small processes. (164 refs.) (au)

  15. Knowledge-based system for automatic MBR control.

    Science.gov (United States)

    Comas, J; Meabe, E; Sancho, L; Ferrero, G; Sipma, J; Monclús, H; Rodriguez-Roda, I

    2010-01-01

    MBR technology is currently challenging traditional wastewater treatment systems and is increasingly selected for WWTP upgrading. MBR systems typically are constructed on a smaller footprint, and provide superior treated water quality. However, the main drawback of MBR technology is that the permeability of membranes declines during filtration due to membrane fouling, which for a large part causes the high aeration requirements of an MBR to counteract this fouling phenomenon. Due to the complex and still unknown mechanisms of membrane fouling it is neither possible to describe clearly its development by means of a deterministic model, nor to control it with a purely mathematical law. Consequently the majority of MBR applications are controlled in an "open-loop" way i.e. with predefined and fixed air scour and filtration/relaxation or backwashing cycles, and scheduled inline or offline chemical cleaning as a preventive measure, without taking into account the real needs of membrane cleaning based on its filtration performance. However, existing theoretical and empirical knowledge about potential cause-effect relations between a number of factors (influent characteristics, biomass characteristics and operational conditions) and MBR operation can be used to build a knowledge-based decision support system (KB-DSS) for the automatic control of MBRs. This KB-DSS contains a knowledge-based control module, which, based on real time comparison of the current permeability trend with "reference trends", aims at optimizing the operation and energy costs and decreasing fouling rates. In practice the automatic control system proposed regulates the set points of the key operational variables controlled in MBR systems (permeate flux, relaxation and backwash times, backwash flows and times, aeration flow rates, chemical cleaning frequency, waste sludge flow rate and recycle flow rates) and identifies its optimal value. This paper describes the concepts and the 3-level architecture

  16. From conventional software based systems to knowledge based systems

    International Nuclear Information System (INIS)

    Bologna, S.

    1995-01-01

    Even if todays nuclear power plants have a very good safety record, there is a continuous search for still improving safety. One direction of this effort address operational safety, trying to improve the handling of disturbances and accidents partly by further automation, partly by creating a better control room environment, providing the operator with intelligent support systems to help in the decision making process. Introduction of intelligent computerised operator support systems has proved to be an efficient way of improving the operators performance. A number of systems have been developed worldwide, assisting in tasks like process fault detection and diagnosis, selection and implementation of proper remedial actions. Unfortunately, the use of Knowledge Based Systems (KBSs), introduces a new dimension to the problem of the licensing process. KBSs, despite the different technology employed, are still nothing more than a computer program. Unfortunately, quite a few people building knowledge based systems seem to ignore the many good programming practices that have evolved over the years for producing traditional computer programs. In this paper the author will try to point out similarities and differences between conventional software based systems, and knowledge based systems, introducing also the concept of model based reasoning. (orig.) (25 refs., 2 figs.)

  17. Knowledge representation and knowledge base design for operator advisor system

    International Nuclear Information System (INIS)

    Hangos, K.M.; Sziano, T.; Tapolcai, L.

    1990-01-01

    The problems of knowledge representation, knowledge base handling and design has been described for an Operator Advisor System in the Paks Nuclear Power Plant. The Operator Advisor System is to be implemented as a part of the 5th and 6th unit. The knowledge of the Operator Advisor system is described by a few elementary knowledge items (diagnostic event functions, fault graph, action trees), weighted directed graphs have been found as their common structure. List-type and relational representation of these graphs have been used for the on-line and off-line part of the knowledge base respectively. A uniform data base design and handling has been proposed which consists of a design system, a knowledge base editor and a knowledge base compiler

  18. Knowledge based development of graphic display systems

    International Nuclear Information System (INIS)

    Woods, D.D.

    1985-01-01

    Most human factors guidelines on computer display design attempt to ensure that human sensory limits are not strained or that users can potentially access data. While this is a necessary and too often an overlooked step in interface design, it does not address issues about how to use computer displays to aid human performance at domain tasks. This challenge to human factors guidance is particularly acute in complex environments such as nuclear power plants where the goal is more than a useable interface system; the interface must support effective human performance at tasks like situation assessment, fault management, problem solving and planning. Studies of human performance in complex domains reveal that human-machine performance failures can often be linked to problems in information handling - data overload, getting lost, keyhole effects, tunnel vision to name but a few. All of these information handling problems represent manifestations of an inability to find, integrate or interpret the ''right'' data at the ''right'' time, i.e., failures where critical information is not detected among the ambient data load, where critical information is not assembled from data distributed over time or over space; and where critical information is not looked for because of misunderstandings or erroneous assumptions (cf., Woods, 1985). Problems of this kind illustrate that the potential to see, read, or access data does not guarantee successful user information extraction. The result is a need for research and guidance on design for enhanced information extraction in addition to design for data availability

  19. Structure of the knowledge base for an expert labeling system

    Science.gov (United States)

    Rajaram, N. S.

    1981-01-01

    One of the principal objectives of the NASA AgRISTARS program is the inventory of global crop resources using remotely sensed data gathered by Land Satellites (LANDSAT). A central problem in any such crop inventory procedure is the interpretation of LANDSAT images and identification of parts of each image which are covered by a particular crop of interest. This task of labeling is largely a manual one done by trained human analysts and consequently presents obstacles to the development of totally automated crop inventory systems. However, development in knowledge engineering as well as widespread availability of inexpensive hardware and software for artificial intelligence work offers possibilities for developing expert systems for labeling of crops. Such a knowledge based approach to labeling is presented.

  20. Knowledge based system for fouling assessment of power plant boiler

    International Nuclear Information System (INIS)

    Afgan, N.H.; He, X.; Carvalho, M.G.; Azevedo, J.L.T.

    1999-01-01

    The paper presents the design of an expert system for fouling assessment in power plant boilers. It is an on-line expert system based on selected criteria for the fouling assessment. Using criteria for fouling assessment based on 'clean' and 'not-clean' radiation heat flux measurements, the diagnostic variable are defined for the boiler heat transfer surface. The development of the prototype knowledge-based system for fouling assessment in power plants boiler comprise the integrations of the elements including knowledge base, inference procedure and prototype configuration. Demonstration of the prototype knowledge-based system for fouling assessment was performed on the Sines power plant. It is a 300 MW coal fired power plant. 12 fields are used with 3 on each side of boiler

  1. Development of a knowledge-based system for loop diagnosis

    International Nuclear Information System (INIS)

    Liao, L.Y.; Tang, H.C.; Chen, S.S.

    1987-01-01

    An accident diagnostic system is developed as an attempt to provide a useful aid for the operators of an experimental loop or a nuclear power plant in the case of emergency condition. Because the current practices in the system diagnosis are not satisfactory, there is an increasing demand on the establishment of various operator decision support systems. The knowledge based system is a new and promising technique which can be used to fulfill this demand. With the capability of automatic reasoning and by incorporating the information about system status, the knowledge based system can simulate the process of human thinking and serve as a good decision support system. This knowledge based decision support system can be helpful for both a fast, violent accident and a slowly developed accident. Specifically, a fast diagnostic report can be provided for a fast and violent accident of which time is the main concern and a complete diagnostic report can be provided for a slowly developed accident of which complexity is the main concern. Such a knowledge based decision support system also provides many other equally important advantages, such as the elimination of human error, the automatic validation of signal readings, the establishment of human error, the automatic validation of signal readings, and the establishment of a simulation environment

  2. Knowledge-based operator guidance system for Japanese PWRs

    International Nuclear Information System (INIS)

    Fujita, Y.; Ito, K.; Kawanago, S.; Tani, M.; Murata, R.

    1986-01-01

    A knowledge-based operator support system for nuclear power plant operation is under development. The main theme of the study is the incorporation of operator's cognitive structure as the framework of the knowledge representation and inference control mechanisms. Based upon information collected from interviews, and experiments using a real-time simulator, an operator's model related to diagnostic tasks was developed. A knowledge-based system incorporating the proposed model demonstrated highly efficient problem solving capabilities and the dynamic fitness to operator's perceptual feeling, thereby suggesting the potential importance and practical benefit of such a study

  3. Development of a tool for knowledge base verification of expert system based on Design/CPN

    International Nuclear Information System (INIS)

    Kim, Jong Hyun

    1998-02-01

    Verification is a necessary work in developing a reliable expert system. Verification is a process aimed at demonstrating whether a system meets it's specified requirements. As expert systems are used in various applications, the knowledge base verification of systems takes an important position. The conventional Petri net approach that has been studied recently in order to verify the knowledge base is found that it is inadequate to verify the knowledge base of large and complex system, such as alarm processing system of nuclear power plant. Thus, we propose an improved method that models the knowledge base as enhanced colored Petri net. In this study, we analyze the reachability and the error characteristics of the knowledge base. Generally, verification process requires computational support by automated tools. For this reason, this study developed a tool for knowledge base verification based on Design/CPN, which is a tool for editing, modeling, and simulating Colored Petri net. This tool uses Enhanced Colored Petri net as a modeling method. By applying this tool to the knowledge base of nuclear power plant, it is noticed that it can successfully check most of the anomalies that can occur in a knowledge base

  4. Integrating knowledge based functionality in commercial hospital information systems.

    Science.gov (United States)

    Müller, M L; Ganslandt, T; Eich, H P; Lang, K; Ohmann, C; Prokosch, H U

    2000-01-01

    Successful integration of knowledge-based functions in the electronic patient record depends on direct and context-sensitive accessibility and availability to clinicians and must suit their workflow. In this paper we describe an exemplary integration of an existing standalone scoring system for acute abdominal pain into two different commercial hospital information systems using Java/Corba technolgy.

  5. Integration, Provenance, and Temporal Queries for Large-Scale Knowledge Bases

    OpenAIRE

    Gao, Shi

    2016-01-01

    Knowledge bases that summarize web information in RDF triples deliver many benefits, including support for natural language question answering and powerful structured queries that extract encyclopedic knowledge via SPARQL. Large scale knowledge bases grow rapidly in terms of scale and significance, and undergo frequent changes in both schema and content. Two critical problems have thus emerged: (i) how to support temporal queries that explore the history of knowledge bases or flash-back to th...

  6. Terminological reference of a knowledge-based system: the data dictionary.

    Science.gov (United States)

    Stausberg, J; Wormek, A; Kraut, U

    1995-01-01

    The development of open and integrated knowledge bases makes new demands on the definition of the used terminology. The definition should be realized in a data dictionary separated from the knowledge base. Within the works done at a reference model of medical knowledge, a data dictionary has been developed and used in different applications: a term definition shell, a documentation tool and a knowledge base. The data dictionary includes that part of terminology, which is largely independent of a certain knowledge model. For that reason, the data dictionary can be used as a basis for integrating knowledge bases into information systems, for knowledge sharing and reuse and for modular development of knowledge-based systems.

  7. Formal Support for Development of Knowledge-Based Systems

    NARCIS (Netherlands)

    Fensel, Dieter; Van Harmelen, Frank; Reif, Wolfgang; Ten Teije, Annette

    1998-01-01

    This article provides an approach for developing reliable knowledge-based systems. Its main contributions are: Specification is done at an architectural level that abstracts from a specific implementation formalism. The model of expertise of CommonKADS distinguishs different types of knowledge and

  8. Knowledge based system for control rod programming of BWRs

    International Nuclear Information System (INIS)

    Fukuzaki, Takaharu; Yoshida, Ken-ichi; Kobayashi, Yasuhiro

    1988-01-01

    A knowledge based system has been developed to support designers in control rod programming of BWRs. The programming searches through optimal control rod patterns to realize safe and effective burning of nuclear fuel. Knowledge of experienced designers plays the main role in minimizing the number of calculations by the core performance evaluation code. This code predicts power distibution and thermal margins of the nuclear fuel. This knowledge is transformed into 'if-then' type rules and subroutines, and is stored in a knowledge base of the knowledge based system. The system consists of working area, an inference engine and the knowledge base. The inference engine can detect those data which have to be regenerated, call those subroutine which control the user's interface and numerical computations, and store competitive sets of data in different parts of the working area. Using this system, control rod programming of a BWR plant was traced with about 500 rules and 150 subroutines. Both the generation of control rod patterns for the first calculation of the code and the modification of a control rod pattern to reflect the calculation were completed more effectively than in a conventional method. (author)

  9. Process fault diagnosis using knowledge-based systems

    International Nuclear Information System (INIS)

    Sudduth, A.L.

    1991-01-01

    Advancing technology in process plants has led to increased need for computer based process diagnostic systems to assist the operator. One approach to this problem is to use an embedded knowledge based system to interpret measurement signals. Knowledge based systems using only symptom based rules are inadequate for real time diagnosis of dynamic systems; therefore a model based approach is necessary. Though several forms of model based reasoning have been proposed, the use of qualitative causal models incorporating first principles knowledge of process behavior structure, and function appear to have the most promise as a robust modeling methodology. In this paper the structure of a diagnostic system is described which uses model based reasoning and conventional numerical methods to perform process diagnosis. This system is being applied to emergency diesel generator system in nuclear stations

  10. Knowledge based operation assist system for JAERI AVF cyclotron

    International Nuclear Information System (INIS)

    Agematsu, T.; Okumura, S.; Yokota, W.; Arakawa, K.; Murakami, T.; Okamura, T.

    1992-01-01

    We have developed two operation assist systems for easy and rapid operation of the JAERI AVF cyclotron. One is a knowledge based expert system guiding the sequence of parameter adjustment to inexperienced cyclotron operators. The other is a real-time simulation of the beam trajectories which are calculated from actual operating parameters. It graphically indicates feasible setting range of parameters that satisfies the acceptance of the cyclotron. These systems provide a human interface to adjust the parameters of the cyclotron. (author)

  11. Integrated Knowledge Based Expert System for Disease Diagnosis System

    Science.gov (United States)

    Arbaiy, Nureize; Sulaiman, Shafiza Eliza; Hassan, Norlida; Afizah Afip, Zehan

    2017-08-01

    The role and importance of healthcare systems to improve quality of life and social welfare in a society have been well recognized. Attention should be given to raise awareness and implementing appropriate measures to improve health care. Therefore, a computer based system is developed to serve as an alternative for people to self-diagnose their health status based on given symptoms. This strategy should be emphasized so that people can utilize the information correctly as a reference to enjoy healthier life. Hence, a Web-based Community Center for Healthcare Diagnosis system is developed based on expert system technique. Expert system reasoning technique is employed in the system to enable information about treatment and prevention of the diseases based on given symptoms. At present, three diseases are included which are arthritis, thalassemia and pneumococcal. Sets of rule and fact are managed in the knowledge based system. Web based technology is used as a platform to disseminate the information to users in order for them to optimize the information appropriately. This system will benefit people who wish to increase health awareness and seek expert knowledge on the diseases by performing self-diagnosis for early disease detection.

  12. A knowledge-based system for prototypical reasoning

    Science.gov (United States)

    Lieto, Antonio; Minieri, Andrea; Piana, Alberto; Radicioni, Daniele P.

    2015-04-01

    In this work we present a knowledge-based system equipped with a hybrid, cognitively inspired architecture for the representation of conceptual information. The proposed system aims at extending the classical representational and reasoning capabilities of the ontology-based frameworks towards the realm of the prototype theory. It is based on a hybrid knowledge base, composed of a classical symbolic component (grounded on a formal ontology) with a typicality based one (grounded on the conceptual spaces framework). The resulting system attempts to reconcile the heterogeneous approach to the concepts in Cognitive Science with the dual process theories of reasoning and rationality. The system has been experimentally assessed in a conceptual categorisation task where common sense linguistic descriptions were given in input, and the corresponding target concepts had to be identified. The results show that the proposed solution substantially extends the representational and reasoning 'conceptual' capabilities of standard ontology-based systems.

  13. A knowledge based system for creep-fatigue assessment

    International Nuclear Information System (INIS)

    Holdsworth, S.R.

    1999-01-01

    A knowledge based system was developed in the BRITE-EURAM C-FAT project to store the material property information necessary to perform complex creep-fatigue assessments and to thereby improve the effectiveness of data retrieval for such purposes. The C-FAT KBS incorporates a multi-level database which is structured to contain not only 'reduced' deformation and fracture test data, but also to enable ready access to the derived parameter constants for the constitutive and model equations used in a range of assessment procedures. The data management scheme is reviewed. The C-FAT KBS also has a dynamic worked example module which allows the sensitivity of predicted lifetimes to material property input data to be evaluated by a number of procedures. Complex cycle creep-fatigue endurance predictions are particularly sensitive to the creep property data used in assessment, and this is demonstrated with reference to the results of a number of large single edge notched bend specimen feature tests performed on a 1CrMoV turbine casting steel at 550 C. (orig.)

  14. HSTDEK: Developing a methodology for construction of large-scale, multi-use knowledge bases

    Science.gov (United States)

    Freeman, Michael S.

    1987-01-01

    The primary research objectives of the Hubble Space Telescope Design/Engineering Knowledgebase (HSTDEK) are to develop a methodology for constructing and maintaining large scale knowledge bases which can be used to support multiple applications. To insure the validity of its results, this research is being persued in the context of a real world system, the Hubble Space Telescope. The HSTDEK objectives are described in detail. The history and motivation of the project are briefly described. The technical challenges faced by the project are outlined.

  15. Development of knowledge base system linked to material database

    International Nuclear Information System (INIS)

    Kaji, Yoshiyuki; Tsuji, Hirokazu; Mashiko, Shinichi; Miyakawa, Shunichi; Fujita, Mitsutane; Kinugawa, Junichi; Iwata, Shuichi

    2002-01-01

    The distributed material database system named 'Data-Free-Way' has been developed by four organizations (the National Institute for Materials Science, the Japan Atomic Energy Research Institute, the Japan Nuclear Cycle Development Institute, and the Japan Science and Technology Corporation) under a cooperative agreement in order to share fresh and stimulating information as well as accumulated information for the development of advanced nuclear materials, for the design of structural components, etc. In order to create additional values of the system, knowledge base system, in which knowledge extracted from the material database is expressed, is planned to be developed for more effective utilization of Data-Free-Way. XML (eXtensible Markup Language) has been adopted as the description method of the retrieved results and the meaning of them. One knowledge note described with XML is stored as one knowledge which composes the knowledge base. Since this knowledge note is described with XML, the user can easily convert the display form of the table and the graph into the data format which the user usually uses. This paper describes the current status of Data-Free-Way, the description method of knowledge extracted from the material database with XML and the distributed material knowledge base system. (author)

  16. Knowledge based expert system approach to instrumentation selection (INSEL

    Directory of Open Access Journals (Sweden)

    S. Barai

    2004-08-01

    Full Text Available The selection of appropriate instrumentation for any structural measurement of civil engineering structure is a complex task. Recent developments in Artificial Intelligence (AI can help in an organized use of experiential knowledge available on instrumentation for laboratory and in-situ measurement. Usually, the instrumentation decision is based on the experience and judgment of experimentalists. The heuristic knowledge available for different types of measurement is domain dependent and the information is scattered in varied knowledge sources. The knowledge engineering techniques can help in capturing the experiential knowledge. This paper demonstrates a prototype knowledge based system for INstrument SELection (INSEL assistant where the experiential knowledge for various structural domains can be captured and utilized for making instrumentation decision. In particular, this Knowledge Based Expert System (KBES encodes the heuristics on measurement and demonstrates the instrument selection process with reference to steel bridges. INSEL runs on a microcomputer and uses an INSIGHT 2+ environment.

  17. A knowledge-based system for fluidization studies

    Energy Technology Data Exchange (ETDEWEB)

    1990-04-01

    Chemical engineers depend on process simulation models to determine optimal'' plant configurations which are technically feasible and economically viable. This research was undertaken to develop a comprehensive knowledge based simulation environment IPSE (Intelligent Process Simulation Environment) that can enhance the productivity of chemical engineers/modelers by serving as an intelligent assistant during all phases of process simulation involving fossil energy processes. In summary, the goals of this research are: application of knowledge-based techniques to the process modeling domain for enhancement of productivity; archiving and distribution of the knowledge of the best experts of process modeling; cross-model inference assistance to modelers not familiar with the process; and development of IPSE to serve as an intelligent tutoring system for process simulation. 18 figs.

  18. A real time knowledge-based alarm system EXTRA

    International Nuclear Information System (INIS)

    Ancelin, J.; Gaussot, J.P.; Legaud, P.

    1987-01-01

    EXTRA is an experimental expert system for industrial process control. The main objectives are the diagnosis and operation aids. From a methodological point of view, EXTRA is based on a deep knowledge of the plant operation and on qualitative simulation principles. The application concerns all the electric power and the Chemical and Volume Control System of a P.W.R. nuclear plant. The tests conducted on a full-scope simulator representative of the real plant yielded excellent results and taught the authors a number of lessons. The main lesson concerns the efficiency and flexibility provided by the combination of a knowledge-based system and of an advanced mini-computer

  19. ISPE: A knowledge-based system for fluidization studies

    Energy Technology Data Exchange (ETDEWEB)

    Reddy, S.

    1991-01-01

    Chemical engineers use mathematical simulators to design, model, optimize and refine various engineering plants/processes. This procedure requires the following steps: (1) preparation of an input data file according to the format required by the target simulator; (2) excecuting the simulation; and (3) analyzing the results of the simulation to determine if all specified goals'' are satisfied. If the goals are not met, the input data file must be modified and the simulation repeated. This multistep process is continued until satisfactory results are obtained. This research was undertaken to develop a knowledge based system, IPSE (Intelligent Process Simulation Environment), that can enhance the productivity of chemical engineers/modelers by serving as an intelligent assistant to perform a variety tasks related to process simulation. ASPEN, a widely used simulator by the US Department of Energy (DOE) at Morgantown Energy Technology Center (METC) was selected as the target process simulator in the project. IPSE, written in the C language, was developed using a number of knowledge-based programming paradigms: object-oriented knowledge representation that uses inheritance and methods, rulebased inferencing (includes processing and propagation of probabilistic information) and data-driven programming using demons. It was implemented using the knowledge based environment LASER. The relationship of IPSE with the user, ASPEN, LASER and the C language is shown in Figure 1.

  20. Knowledge-based dialogue in Intelligent Decision Support Systems

    International Nuclear Information System (INIS)

    Hollnagel, E.

    1987-01-01

    The overall goal for the design of Intelligent Decision Support Systems (IDSS) is to enhance understanding of the process under all operating conditions. For an IDSS to be effective, it must: select or generate the right information; produce reliable and consistent information; allow flexible and effective operator interaction; relate information presentation to current plant status and problems; and make the presentation at the right time. Several ongoing R and D programs try to design and build IDSSs. A particular example is the ESPRIT project Graphics and Knowledge Based Diaglogue for Dynamic Systems (GRADIENT). This project, the problems it addresses, and its uses, are discussed here

  1. End user interface and knowledge base editing system of CSPAR: a knowledge-based consultation system for preventive maintenance in nuclear plants

    International Nuclear Information System (INIS)

    Sinohara, Yasusi; Terano, Takao; Nishiyama, Takuya

    1988-01-01

    Consultation System for Prevention of Abnormal-event Recurrence (CSPAR) is a knowledge-based system to analyze the same kind of events to a given fault reported on a nuclear power plant and to give users some informations for effective measures preventing them. This report discusses the interfaces of CSPAR for both end-users and knowledge-base editors. The interfaces are highly interactive and multi-window oriented. The features are as follows: (1) The end-user interfaces has Japanese language processing facility, which enables the users to consult CSPAR with various synonims and related terms for knowledge-base handling; (2) The knowledge-base editing system is used by knowledge-base editors for maintaining the knowledge on both plants' equipments and abnormal events sequences. It has facilities for easy maintenance of knowledge-bases, which includes a graphic oriented browser, a knowledge-base retriever, and a knowledge-base checker. (author)

  2. A knowledge based system for training radiation emergency response personnel

    International Nuclear Information System (INIS)

    Kuriakose, K.K.; Peter, T.U.; Natarajan, A.

    1992-01-01

    One of the important aspects of radiation emergency preparedness is to impart training to emergency handling staff. Mock exercises are generally used for this purpose. But practical considerations limit the frequency of such exercises. A suitably designed computer software can be effectively used to impart training. With the advent of low cost personal computers, the frequency with which the training programme can be conducted is unlimited. A computer software with monotonic behaviour is inadequate for such training. It is necessary to provide human like tutoring capabilities. With the advances in knowledge based computer systems, it is possible to develop such a system. These systems have the capability of providing individualized training. This paper describes the development of such a system for training and evaluation of agencies associated with the management of radiation emergency. It also discusses the utility of the software as a general purpose tutor. The details required for the preparation of data files and knowledge base files are included. It uses a student model based on performance measures. The software is developed in C under MS-DOS. It uses a rule based expert system shell developed in C. The features of this shell are briefly described. (author). 5 refs

  3. Knowledge-based support system for requirement elaboration in design

    International Nuclear Information System (INIS)

    Furuta, Kazuo; Kondo, Shunsuke

    1994-01-01

    Design requirements are the seeds of every design activity, but elicitation and formalization of them are not easy tasks. This paper proposes a method to support designers in such requirement elaboration process with a computer. In this method the cognitive work space of designers is modeled by abstraction and structural hierarchies, and supporting functions of knowledge-based requirement elaboration, requirement classification and assessment of contentment status of requirements are provided on this framework. A prototype system was developed and tested using fast breeder reactor design. (author)

  4. Knowledge based systems advanced concepts, techniques and applications

    CERN Document Server

    1997-01-01

    The field of knowledge-based systems (KBS) has expanded enormously during the last years, and many important techniques and tools are currently available. Applications of KBS range from medicine to engineering and aerospace.This book provides a selected set of state-of-the-art contributions that present advanced techniques, tools and applications. These contributions have been prepared by a group of eminent researchers and professionals in the field.The theoretical topics covered include: knowledge acquisition, machine learning, genetic algorithms, knowledge management and processing under unc

  5. The analysis phase in development of knowledge-based systems

    International Nuclear Information System (INIS)

    Brooking, A.G.

    1986-01-01

    Over the past twenty years computer scientists have realized that, in order to produce reliable software that is easily modifiable, a proven methodology is required. Unlike conventional systems there is little knowledge of the life cycle of these knowledge-based systems. However, if the life cycle of conventional systems, it is not unreasonable to assume that analysis will come first. With respect to the analysis task there is an enormous difference in types of analysis. Conventional systems analysis is predominately concerned with what happens within the system. Typically, procedures will be noted in the way they relate to each other, the way data moves and changes within the system. There is often an example, on paper or machine, that can be observed

  6. Knowledge-based fault diagnosis system for refuse collection vehicle

    International Nuclear Information System (INIS)

    Tan, CheeFai; Juffrizal, K.; Khalil, S. N.; Nidzamuddin, M. Y.

    2015-01-01

    The refuse collection vehicle is manufactured by local vehicle body manufacturer. Currently; the company supplied six model of the waste compactor truck to the local authority as well as waste management company. The company is facing difficulty to acquire the knowledge from the expert when the expert is absence. To solve the problem, the knowledge from the expert can be stored in the expert system. The expert system is able to provide necessary support to the company when the expert is not available. The implementation of the process and tool is able to be standardize and more accurate. The knowledge that input to the expert system is based on design guidelines and experience from the expert. This project highlighted another application on knowledge-based system (KBS) approached in trouble shooting of the refuse collection vehicle production process. The main aim of the research is to develop a novel expert fault diagnosis system framework for the refuse collection vehicle

  7. Knowledge-based fault diagnosis system for refuse collection vehicle

    Energy Technology Data Exchange (ETDEWEB)

    Tan, CheeFai; Juffrizal, K.; Khalil, S. N.; Nidzamuddin, M. Y. [Centre of Advanced Research on Energy, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, Durian Tunggal, Melaka (Malaysia)

    2015-05-15

    The refuse collection vehicle is manufactured by local vehicle body manufacturer. Currently; the company supplied six model of the waste compactor truck to the local authority as well as waste management company. The company is facing difficulty to acquire the knowledge from the expert when the expert is absence. To solve the problem, the knowledge from the expert can be stored in the expert system. The expert system is able to provide necessary support to the company when the expert is not available. The implementation of the process and tool is able to be standardize and more accurate. The knowledge that input to the expert system is based on design guidelines and experience from the expert. This project highlighted another application on knowledge-based system (KBS) approached in trouble shooting of the refuse collection vehicle production process. The main aim of the research is to develop a novel expert fault diagnosis system framework for the refuse collection vehicle.

  8. Space nuclear reactor system diagnosis: Knowledge-based approach

    International Nuclear Information System (INIS)

    Ting, Y.T.D.

    1990-01-01

    SP-100 space nuclear reactor system development is a joint effort by the Department of Energy, the Department of Defense and the National Aeronautics and Space Administration. The system is designed to operate in isolation for many years, and is possibly subject to little or no remote maintenance. This dissertation proposes a knowledge based diagnostic system which, in principle, can diagnose the faults which can either cause reactor shutdown or lead to another serious problem. This framework in general can be applied to the fully specified system if detailed design information becomes available. The set of faults considered herein is identified based on heuristic knowledge about the system operation. The suitable approach to diagnostic problem solving is proposed after investigating the most prevalent methodologies in Artificial Intelligence as well as the causal analysis of the system. Deep causal knowledge modeling based on digraph, fault-tree or logic flowgraph methodology would present a need for some knowledge representation to handle the time dependent system behavior. A proposed qualitative temporal knowledge modeling methodology, using rules with specified time delay among the process variables, has been proposed and is used to develop the diagnostic sufficient rule set. The rule set has been modified by using a time zone approach to have a robust system design. The sufficient rule set is transformed to a sufficient and necessary one by searching the whole knowledge base. Qualitative data analysis is proposed in analyzing the measured data if in a real time situation. An expert system shell - Intelligence Compiler is used to develop the prototype system. Frames are used for the process variables. Forward chaining rules are used in monitoring and backward chaining rules are used in diagnosis

  9. Intelligent Flowcharting Developmental Approach to Legal Knowledge Based System

    Directory of Open Access Journals (Sweden)

    Nitin Balaji Bilgi

    2011-10-01

    Full Text Available The basic aim of this research, described in this paper is to develop a hybrid legal expert system/ knowledge based system, with specific reference to the transfer of property act, within the Indian legal system which is often in demand. In this paper the authors discuss an traditional approach to combining two types of reasoning methodologies, Rule Based Reasoning (RBR and Case Based Reasoning (CBR. In RBR module we have interpreted and implemented rules that occur in legal statutes of the Transfer of property act. In the CBR module we have an implementation to find the related cases. The VisiRule software made available by Logic Programming Associates is used in the development of RBR part this expert system. The authors have used java Net Beans for development of CBR. VisiRule is a decision charting tool, in which the rules are defined by a combination of graphical shapes and pieces of text, and produces rules.

  10. Knowledge-based system for flight information management. Thesis

    Science.gov (United States)

    Ricks, Wendell R.

    1990-01-01

    The use of knowledge-based system (KBS) architectures to manage information on the primary flight display (PFD) of commercial aircraft is described. The PFD information management strategy used tailored the information on the PFD to the tasks the pilot performed. The KBS design and implementation of the task-tailored PFD information management application is described. The knowledge acquisition and subsequent system design of a flight-phase-detection KBS is also described. The flight-phase output of this KBS was used as input to the task-tailored PFD information management KBS. The implementation and integration of this KBS with existing aircraft systems and the other KBS is described. The flight tests are examined of both KBS's, collectively called the Task-Tailored Flight Information Manager (TTFIM), which verified their implementation and integration, and validated the software engineering advantages of the KBS approach in an operational environment.

  11. Knowledge-Based Systems in Biomedicine and Computational Life Science

    CERN Document Server

    Jain, Lakhmi

    2013-01-01

    This book presents a sample of research on knowledge-based systems in biomedicine and computational life science. The contributions include: ·         personalized stress diagnosis system ·         image analysis system for breast cancer diagnosis ·         analysis of neuronal cell images ·         structure prediction of protein ·         relationship between two mental disorders ·         detection of cardiac abnormalities ·         holistic medicine based treatment ·         analysis of life-science data  

  12. Real-time application of knowledge-based systems

    Science.gov (United States)

    Brumbaugh, Randal W.; Duke, Eugene L.

    1989-01-01

    The Rapid Prototyping Facility (RPF) was developed to meet a need for a facility which allows flight systems concepts to be prototyped in a manner which allows for real-time flight test experience with a prototype system. This need was focused during the development and demonstration of the expert system flight status monitor (ESFSM). The ESFSM was a prototype system developed on a LISP machine, but lack of a method for progressive testing and problem identification led to an impractical system. The RPF concept was developed, and the ATMS designed to exercise its capabilities. The ATMS Phase 1 demonstration provided a practical vehicle for testing the RPF, as well as a useful tool. ATMS Phase 2 development continues. A dedicated F-18 is expected to be assigned for facility use in late 1988, with RAV modifications. A knowledge-based autopilot is being developed using the RPF. This is a system which provides elementary autopilot functions and is intended as a vehicle for testing expert system verification and validation methods. An expert system propulsion monitor is being prototyped. This system provides real-time assistance to an engineer monitoring a propulsion system during a flight.

  13. Knowledge Based Help desk System in Nuclear Malaysia

    International Nuclear Information System (INIS)

    Mohamad Safuan Sulaiman; Abdul Muin Abdul Rahman; Norzalina Nasirudin; Khairiel Adyani Abdul Ghani; Abdul Aziz Mhd Ramli; Mohd Ashhar Khalid

    2012-01-01

    Knowledge based (K-based) Help desk system is a knowledge oriented web based system that provides support to business process of the technical service providers. It is a multi-centric system which focuses on end-users, technical workers and higher level management through utilization of knowledge which resides and grows within the system. The objectives of the system are to be a user-friendly, capture technical knowledge for efficient performance and educating users for self reliance. These were achieved through the improvement of the help desk business process and better management of technical knowledge. This system has been tested and implemented in Information Technology Center (IT), Engineering Division (BKJ) and Instrumentation and Automation Center (IAC) at the Malaysian Nuclear Agency (Nuclear Malaysia). Higher levels of user satisfaction and faster growth in technical knowledge repository have been recorded in the system. This paper describes the help desk system in the perspective of management of its technical knowledge contributing to strengthening organizational knowledge asset of Nuclear Malaysia as national nuclear research institution. (Author)

  14. A model for a knowledge-based system's life cycle

    Science.gov (United States)

    Kiss, Peter A.

    1990-01-01

    The American Institute of Aeronautics and Astronautics has initiated a Committee on Standards for Artificial Intelligence. Presented here are the initial efforts of one of the working groups of that committee. The purpose here is to present a candidate model for the development life cycle of Knowledge Based Systems (KBS). The intent is for the model to be used by the Aerospace Community and eventually be evolved into a standard. The model is rooted in the evolutionary model, borrows from the spiral model, and is embedded in the standard Waterfall model for software development. Its intent is to satisfy the development of both stand-alone and embedded KBSs. The phases of the life cycle are detailed as are and the review points that constitute the key milestones throughout the development process. The applicability and strengths of the model are discussed along with areas needing further development and refinement by the aerospace community.

  15. OWL2 benchmarking for the evaluation of knowledge based systems.

    Directory of Open Access Journals (Sweden)

    Sher Afgun Khan

    Full Text Available OWL2 semantics are becoming increasingly popular for the real domain applications like Gene engineering and health MIS. The present work identifies the research gap that negligible attention has been paid to the performance evaluation of Knowledge Base Systems (KBS using OWL2 semantics. To fulfil this identified research gap, an OWL2 benchmark for the evaluation of KBS is proposed. The proposed benchmark addresses the foundational blocks of an ontology benchmark i.e. data schema, workload and performance metrics. The proposed benchmark is tested on memory based, file based, relational database and graph based KBS for performance and scalability measures. The results show that the proposed benchmark is able to evaluate the behaviour of different state of the art KBS on OWL2 semantics. On the basis of the results, the end users (i.e. domain expert would be able to select a suitable KBS appropriate for his domain.

  16. IGENPRO knowledge-based digital system for process transient diagnostics and management

    International Nuclear Information System (INIS)

    Morman, J.A.; Reifman, J.; Vitela, J.E.; Wei, T.Y.C.; Applequist, C.A.; Hippely, P.; Kuk, W.; Tsoukalas, L.H.

    1998-01-01

    Verification and validation issues have been perceived as important factors in the large scale deployment of knowledge-based digital systems for plant transient diagnostics and management. Research and development (R and D) is being performed on the IGENPRO package to resolve knowledge base issues. The IGENPRO approach is to structure the knowledge bases on generic thermal-hydraulic (T-H) first principles and not use the conventional event-basis structure. This allows for generic comprehensive knowledge, relatively small knowledge bases and above all the possibility of T-H system/plant independence. To demonstrate concept feasibility the knowledge structure has been implemented in the diagnostic module PRODIAG. Promising laboratory testing results have been obtained using data from the full scope Braidwood PWR operator training simulator. This knowledge structure is now being implemented in the transient management module PROMANA to treat unanticipated events and the PROTREN module is being developed to process actual plant data. Achievement of the IGENPRO R and D goals should contribute to the acceptance of knowledge-based digital systems for transient diagnostics and management. (author)

  17. IGENPRO knowledge-based digital system for process transient diagnostics and management

    International Nuclear Information System (INIS)

    Morman, J.A.; Reifman, J.; Wei, T.Y.C.

    1997-01-01

    Verification and validation issues have been perceived as important factors in the large scale deployment of knowledge-based digital systems for plant transient diagnostics and management. Research and development (R ampersand D) is being performed on the IGENPRO package to resolve knowledge base issues. The IGENPRO approach is to structure the knowledge bases on generic thermal-hydraulic (T-H) first principles and not use the conventional event-basis structure. This allows for generic comprehensive knowledge, relatively small knowledge bases and above all the possibility of T-H system/plant independence. To demonstrate concept feasibility the knowledge structure has been implemented in the diagnostic module PRODIAG. Promising laboratory testing results have been obtained using data from the full scope Braidwood PWR operator training simulator. This knowledge structure is now being implemented in the transient management module PROMANA to treat unanticipated events and the PROTREN module is being developed to process actual plant data. Achievement of the IGENPRO R ampersand D goals should contribute to the acceptance of knowledge-based digital systems for transient diagnostics and management

  18. Compiling knowledge-based systems from KEE to Ada

    Science.gov (United States)

    Filman, Robert E.; Bock, Conrad; Feldman, Roy

    1990-01-01

    The dominant technology for developing AI applications is to work in a multi-mechanism, integrated, knowledge-based system (KBS) development environment. Unfortunately, systems developed in such environments are inappropriate for delivering many applications - most importantly, they carry the baggage of the entire Lisp environment and are not written in conventional languages. One resolution of this problem would be to compile applications from complex environments to conventional languages. Here the first efforts to develop a system for compiling KBS developed in KEE to Ada (trademark). This system is called KATYDID, for KEE/Ada Translation Yields Development Into Delivery. KATYDID includes early prototypes of a run-time KEE core (object-structure) library module for Ada, and translation mechanisms for knowledge structures, rules, and Lisp code to Ada. Using these tools, part of a simple expert system was compiled (not quite automatically) to run in a purely Ada environment. This experience has given us various insights on Ada as an artificial intelligence programming language, potential solutions of some of the engineering difficulties encountered in early work, and inspiration on future system development.

  19. Dynamic reasoning in a knowledge-based system

    Science.gov (United States)

    Rao, Anand S.; Foo, Norman Y.

    1988-01-01

    Any space based system, whether it is a robot arm assembling parts in space or an onboard system monitoring the space station, has to react to changes which cannot be foreseen. As a result, apart from having domain-specific knowledge as in current expert systems, a space based AI system should also have general principles of change. This paper presents a modal logic which can not only represent change but also reason with it. Three primitive operations, expansion, contraction and revision are introduced and axioms which specify how the knowledge base should change when the external world changes are also specified. Accordingly the notion of dynamic reasoning is introduced, which unlike the existing forms of reasoning, provide general principles of change. Dynamic reasoning is based on two main principles, namely minimize change and maximize coherence. A possible-world semantics which incorporates the above two principles is also discussed. The paper concludes by discussing how the dynamic reasoning system can be used to specify actions and hence form an integral part of an autonomous reasoning and planning system.

  20. A Knowledge Based Recommender System with Multigranular Linguistic Information

    Directory of Open Access Journals (Sweden)

    Luis Martinez

    2008-08-01

    Full Text Available Recommender systems are applications that have emerged in the e-commerce area in order to assist users in their searches in electronic shops. These shops usually offer a wide range of items that cover the necessities of a great variety of users. Nevertheless, searching in such a wide range of items could be a very difficult and time-consuming task. Recommender systems assist users to find out suitable items by means of recommendations based on information provided by different sources such as: other users, experts, item features, etc. Most of the recommender systems force users to provide their preferences or necessities using an unique numerical scale of information fixed in advance. In spite of this information is usually related to opinions, tastes and perceptions, therefore, it seems that is usually better expressed in a qualitative way, with linguistic terms, than in a quantitative way, with precise numbers. We propose a Knowledge Based Recommender System that uses the fuzzy linguistic approach to define a flexible framework to capture the uncertainty of the user's preferences. Thus, this framework will allow users to express their necessities in scales closer to their own knowledge, and different from the scale utilized to describe the items.

  1. Knowledge-Based operation planning system for boiling water reactors

    International Nuclear Information System (INIS)

    Tatsuya Iwamoto; Shungo Sakurai; Hitoshi Uematsu; Makoto Tsuiki

    1987-01-01

    A knowledge-Based Boiling Water Reactor operation planning system was developed to support core operators or core management engineers in making core operation plans, by automatically generating suboptimum core operation procedures. The procedures are obtained by searching a branching tree of the possible core status (nodes) and the elementary operations to change the core status (branches). A path that ends at the target node, and contains only operationally feasible nodes can be a candidate of the solution. The core eigenvalue, the power distribution and the thermal limit parameters at key points are calculated by running a three-dimensional (3-D) BWR core physics simulator to examine the feasibility of the nodes and the performance of candidates. To obtain a practically acceptable solution within a reasonable time rather than making a time-consuming effort to get the optimum one, the Depth-First-Search method, together with the heuristic branch-bounding, was used to search the branching tree. The system was applied to actual operation plannings with real plant data, and gave satisfactory results. It can be concluded that the system can be applied to generate core operation procedures as a substitute for core management experts

  2. KNOWLEDGE-BASED ROBOT VISION SYSTEM FOR AUTOMATED PART HANDLING

    Directory of Open Access Journals (Sweden)

    J. Wang

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: This paper discusses an algorithm incorporating a knowledge-based vision system into an industrial robot system for handling parts intelligently. A continuous fuzzy controller was employed to extract boundary information in a computationally efficient way. The developed algorithm for on-line part recognition using fuzzy logic is shown to be an effective solution to extract the geometric features of objects. The proposed edge vector representation method provides enough geometric information and facilitates the object geometric reconstruction for gripping planning. Furthermore, a part-handling model was created by extracting the grasp features from the geometric features.

    AFRIKAANSE OPSOMMING: Hierdie artikel beskryf ‘n kennis-gebaseerde visiesisteemalgoritme wat in ’n industriёle robotsisteem ingesluit word om sodoende intelligente komponenthantering te bewerkstellig. ’n Kontinue wasige beheerder is gebruik om allerlei objekinligting deur middel van ’n effektiewe berekeningsmetode te bepaal. Die ontwikkelde algoritme vir aan-lyn komponentherkenning maak gebruik van wasige logika en word bewys as ’n effektiewe metode om geometriese inligting van objekte te bepaal. Die voorgestelde grensvektormetode verskaf voldoende inligting en maak geometriese rekonstruksie van die objek moontlik om greepbeplanning te kan doen. Voorts is ’n komponenthanteringsmodel ontwikkel deur die grypkenmerke af te lei uit die geometriese eienskappe.

  3. Structural design systems using knowledge-based techniques

    International Nuclear Information System (INIS)

    Orsborn, K.

    1993-01-01

    Engineering information management and the corresponding information systems are of a strategic importance for industrial enterprises. This thesis treats the interdisciplinary field of designing computing systems for structural design and analysis using knowledge-based techniques. Specific conceptual models have been designed for representing the structure and the process of objects and activities in a structural design and analysis domain. In this thesis, it is shown how domain knowledge can be structured along several classification principles in order to reduce complexity and increase flexibility. By increasing the conceptual level of the problem description and representation of the domain knowledge in a declarative form, it is possible to enhance the development, maintenance and use of software for mechanical engineering. This will result in a corresponding increase of the efficiency of the mechanical engineering design process. These ideas together with the rule-based control point out the leverage of declarative knowledge representation within this domain. Used appropriately, a declarative knowledge representation preserves information better, is more problem-oriented and change-tolerant than procedural representations. 74 refs

  4. Knowledge-based reasoning in the Paladin tactical decision generation system

    Science.gov (United States)

    Chappell, Alan R.

    1993-01-01

    A real-time tactical decision generation system for air combat engagements, Paladin, has been developed. A pilot's job in air combat includes tasks that are largely symbolic. These symbolic tasks are generally performed through the application of experience and training (i.e. knowledge) gathered over years of flying a fighter aircraft. Two such tasks, situation assessment and throttle control, are identified and broken out in Paladin to be handled by specialized knowledge based systems. Knowledge pertaining to these tasks is encoded into rule-bases to provide the foundation for decisions. Paladin uses a custom built inference engine and a partitioned rule-base structure to give these symbolic results in real-time. This paper provides an overview of knowledge-based reasoning systems as a subset of rule-based systems. The knowledge used by Paladin in generating results as well as the system design for real-time execution is discussed.

  5. NetWeaver for EMDS user guide (version 1.1): a knowledge base development system.

    Science.gov (United States)

    Keith M. Reynolds

    1999-01-01

    The guide describes use of the NetWeaver knowledge base development system. Knowledge representation in NetWeaver is based on object-oriented fuzzy-logic networks that offer several significant advantages over the more traditional rulebased representation. Compared to rule-based knowledge bases, NetWeaver knowledge bases are easier to build, test, and maintain because...

  6. Ada as an implementation language for knowledge based systems

    Science.gov (United States)

    Rochowiak, Daniel

    1990-01-01

    Debates about the selection of programming languages often produce cultural collisions that are not easily resolved. This is especially true in the case of Ada and knowledge based programming. The construction of programming tools provides a desirable alternative for resolving the conflict.

  7. A knowledge-based system for optimization of fuel reload configurations

    International Nuclear Information System (INIS)

    Galperin, A.; Kimhi, S.; Segev, M.

    1989-01-01

    The authors discuss a knowledge-based production system developed for generating optimal fuel reload configurations. The system was based on a heuristic search method and implemented in Common Lisp programming language. The knowledge base embodied the reactor physics, reactor operations, and a general approach to fuel management strategy. The data base included a description of the physical system involved, i.e., the core geometry and fuel storage. The fifth cycle of the Three Mile Island Unit 1 pressurized water reactor was chosen as a test case. Application of the system to the test case revealed a self-learning process by which a relatively large number of near-optimal configurations were discovered. Several selected solutions were subjected to detailed analysis and demonstrated excellent performance. To summarize, applicability of the proposed heuristic search method in the domain of nuclear fuel management was proved unequivocally

  8. A Representation System User Interface for Knowledge Base Designers

    OpenAIRE

    Fikes, Richard E.

    1982-01-01

    A major strength of frame-based knowledge representation languages is their ability to provide the knowledge base designer with a concise and intuitively appealing means expression. The claim of intuitive appeal is based on the observation that the object -centered style of description provided by these languages often closely matches a designer's understanding of the domain being modeled and therefore lessens the burden of reformulation involved in developing a formal description. To be effe...

  9. Knowledge base mechanisms

    Energy Technology Data Exchange (ETDEWEB)

    Suwa, M; Furukawa, K; Makinouchi, A; Mizoguchi, T; Mizoguchi, F; Yamasaki, H

    1982-01-01

    One of the principal goals of the Fifth Generation Computer System Project for the coming decade is to develop a methodology for building knowledge information processing systems which will provide people with intelligent agents. The key notion of the fifth generation computer system is knowledge used for problem solving. In this paper the authors describe the plan of Randd on knowledge base mechanisms. A knowledge representation system is to be designed to support knowledge acquisition for the knowledge information processing systems. The system will include a knowledge representation language, a knowledge base editor and a debugger. It is also expected to perform as a kind of meta-inference system. In order to develop the large scale knowledge base systems, a knowledge base mechanism based on the relational model is to be studied in the earlier stage of the project. Distributed problem solving is also one of the main issues of the project. 19 references.

  10. A relational data-knowledge base system and its potential in developing a distributed data-knowledge system

    Science.gov (United States)

    Rahimian, Eric N.; Graves, Sara J.

    1988-01-01

    A new approach used in constructing a rational data knowledge base system is described. The relational database is well suited for distribution due to its property of allowing data fragmentation and fragmentation transparency. An example is formulated of a simple relational data knowledge base which may be generalized for use in developing a relational distributed data knowledge base system. The efficiency and ease of application of such a data knowledge base management system is briefly discussed. Also discussed are the potentials of the developed model for sharing the data knowledge base as well as the possible areas of difficulty in implementing the relational data knowledge base management system.

  11. A method of knowledge base verification and validation for nuclear power plants expert systems

    International Nuclear Information System (INIS)

    Kwon, Il Won

    1996-02-01

    The adoption of expert systems mainly as operator supporting systems is becoming increasingly popular as the control algorithms of system become more and more sophisticated and complicated. As a result of this popularity, a large number of expert systems are developed. The nature of expert systems, however, requires that they be verified and validated carefully and that detailed methodologies for their development be devised. Therefore, it is widely noted that assuring the reliability of expert systems is very important, especially in nuclear industry, and it is also recognized that the process of verification and validation is an essential part of reliability assurance for these systems. Research and practices have produced numerous methods for expert system verification and validation (V and V) that suggest traditional software and system approaches to V and V. However, many approaches and methods for expert system V and V are partial, unreliable, and not uniform. The purpose of this paper is to present a new approach to expert system V and V, based on Petri nets, providing a uniform model. We devise and suggest an automated tool, called COKEP (Checker Of Knowledge base using Extended Petri net), for checking incorrectness, inconsistency, and incompleteness in a knowledge base. We also suggest heuristic analysis for validation process to show that the reasoning path is correct

  12. Knowledge based systems for nuclear applications in Germany

    International Nuclear Information System (INIS)

    Schmidt, F.

    1987-01-01

    Several national and international research programs which are dealing with artificial intelligence and other innovative computer applications are in progress in Germany. However in contrast to the development of computer applications in the past, the new research programs are not very much determined from needs of the nuclear industry. Thus, applications of AI techniques in German nuclear industry are not very innovative in the sense of artificial intelligence. They may be divided into two categories: 1. projects which are aimed to explore the new technologies, 2. projects which are aimed to open new areas of work. This situation changes due to the fact that supercomputers with large memory, workstations with cheap disc devices and fast networks are becoming available. These hardware devices allow the connection of locally available knowledge and data bases with powerful central computer capacity. Using such hardware tools new applications can be developed in nuclear engineering using even existing software tools. These new applications may be characterized as integrated systems. The Integral Planning Simulation System IPSS which is under development at the University of Stuttgart is such a system

  13. A knowledge-based diagnosis system for welding machine problem solving

    International Nuclear Information System (INIS)

    Bonnieres, P. de; Boutes, J.L.; Calas, M.A.; Para, S.

    1986-06-01

    This paper presents a knowledge-based diagnosis system which can be a valuable aid in resolving malfunctions and failures encountered using the automatic hot-wire TIG weld cladding process. This knowledge-based system is currently under evaluation by welding operators at the Framatome heavy fabricating facility. Extension to other welding processes is being considered

  14. A knowledge-base verification of NPP expert systems using extended Petri nets

    International Nuclear Information System (INIS)

    Kwon, Il Won; Seong, Poong Hyun

    1995-01-01

    The verification phase of knowledge base is an important part for developing reliable expert systems, especially in nuclear industry. Although several strategies or tools have been developed to perform potential error checking, they often neglect the reliability of verification methods. Because a Petri net provides a uniform mathematical formalization of knowledge base, it has been employed for knowledge base verification. In this work, we devise and suggest an automated tool, called COKEP (Checker Of Knowledge base using Extended Petri net), for detecting incorrectness, inconsistency, and incompleteness in a knowledge base. The scope of the verification problem is expanded to chained errors, unlike previous studies that assumed error incidence to be limited to rule pairs only. In addition, we consider certainty factor in checking, because most of knowledge bases have certainty factors

  15. Knowledge-based computer systems for radiotherapy planning.

    Science.gov (United States)

    Kalet, I J; Paluszynski, W

    1990-08-01

    Radiation therapy is one of the first areas of clinical medicine to utilize computers in support of routine clinical decision making. The role of the computer has evolved from simple dose calculations to elaborate interactive graphic three-dimensional simulations. These simulations can combine external irradiation from megavoltage photons, electrons, and particle beams with interstitial and intracavitary sources. With the flexibility and power of modern radiotherapy equipment and the ability of computer programs that simulate anything the machinery can do, we now face a challenge to utilize this capability to design more effective radiation treatments. How can we manage the increased complexity of sophisticated treatment planning? A promising approach will be to use artificial intelligence techniques to systematize our present knowledge about design of treatment plans, and to provide a framework for developing new treatment strategies. Far from replacing the physician, physicist, or dosimetrist, artificial intelligence-based software tools can assist the treatment planning team in producing more powerful and effective treatment plans. Research in progress using knowledge-based (AI) programming in treatment planning already has indicated the usefulness of such concepts as rule-based reasoning, hierarchical organization of knowledge, and reasoning from prototypes. Problems to be solved include how to handle continuously varying parameters and how to evaluate plans in order to direct improvements.

  16. An ontological knowledge based system for selection of process monitoring and analysis tools

    DEFF Research Database (Denmark)

    Singh, Ravendra; Gernaey, Krist; Gani, Rafiqul

    2010-01-01

    monitoring and analysis tools for a wide range of operations has made their selection a difficult, time consuming and challenging task. Therefore, an efficient and systematic knowledge base coupled with an inference system is necessary to support the optimal selection of process monitoring and analysis tools......, satisfying the process and user constraints. A knowledge base consisting of the process knowledge as well as knowledge on measurement methods and tools has been developed. An ontology has been designed for knowledge representation and management. The developed knowledge base has a dual feature. On the one...... procedures has been developed to retrieve the data/information stored in the knowledge base....

  17. A distributed knowledge-based system for the optimum utilisation of South African wool

    Directory of Open Access Journals (Sweden)

    Nomusa Dlodlo

    2009-09-01

    Full Text Available This article describes the concept and development of a knowledge-based advisory system for the optimum utilisation of South African wool for the benefit of present and potential investors and other interested parties. Wool is a natural animal fibre produced in varying quantities around the world. The wool fibre is far from homogenous; its type and quality, such as fineness and length, depending on the breed of sheep and the environmental conditions prevailing during its growth. Wool is used in a variety of end uses, ranging from fi ne worsted suiting, to hand knitting yarn, carpets, blankets and aircraft upholstery, its use depending largely on its fibre fineness and length. The wool industry is one of the oldest agricultural industries in South Africa, playing an important economic role as an earner of foreign exchange, and providing a living to many people. Wool is produced in many parts of South Africa under extensive, semi-extensive or intensive conditions, and is largely an export commodity. It is produced and traded in a sophisticated free market business environment into the international market place, where supply and demand forces determine price levels. More than 90% of locally produced wool is exported in an unprocessed or semi-processed form which detrimentally affects employment, foreign exchange and income-generating opportunities associated with value-addition prior to export. To reduce the amount of wool exported in unprocessed or semi-processed form, wool-processing enterprises need to be established to produce internationally marketable end products. Therefore, South Africa needs to attract investors into the wool sector, who will set up manufacturing mills in an economically sustainable manner. Potential and present investors in the South African (S.A. wool industry need easily accessible and up-to-date information on the production statistics, processing properties and end-use pplications of the wool they need for the

  18. A Model to Assess the Behavioral Impacts of Consultative Knowledge Based Systems.

    Science.gov (United States)

    Mak, Brenda; Lyytinen, Kalle

    1997-01-01

    This research model studies the behavioral impacts of consultative knowledge based systems (KBS). A study of graduate students explored to what extent their decisions were affected by user participation in updating the knowledge base; ambiguity of decision setting; routinization of usage; and source credibility of the expertise embedded in the…

  19. GUIDON-WATCH: A Graphic Interface for Viewing a Knowledge-Based System. Technical Report #14.

    Science.gov (United States)

    Richer, Mark H.; Clancey, William J.

    This paper describes GUIDON-WATCH, a graphic interface that uses multiple windows and a mouse to allow a student to browse a knowledge base and view reasoning processes during diagnostic problem solving. The GUIDON project at Stanford University is investigating how knowledge-based systems can provide the basis for teaching programs, and this…

  20. An American knowledge base in England - Alternate implementations of an expert system flight status monitor

    Science.gov (United States)

    Butler, G. F.; Graves, A. T.; Disbrow, J. D.; Duke, E. L.

    1989-01-01

    A joint activity between the Dryden Flight Research Facility of the NASA Ames Research Center (Ames-Dryden) and the Royal Aerospace Establishment (RAE) on knowledge-based systems has been agreed. Under the agreement, a flight status monitor knowledge base developed at Ames-Dryden has been implemented using the real-time AI (artificial intelligence) toolkit MUSE, which was developed in the UK. Here, the background to the cooperation is described and the details of the flight status monitor and a prototype MUSE implementation are presented. It is noted that the capabilities of the expert-system flight status monitor to monitor data downlinked from the flight test aircraft and to generate information on the state and health of the system for the test engineers provides increased safety during flight testing of new systems. Furthermore, the expert-system flight status monitor provides the systems engineers with ready access to the large amount of information required to describe a complex aircraft system.

  1. A prototype knowledge based system for pressure vessel design

    Energy Technology Data Exchange (ETDEWEB)

    Gunnarsson, L.

    1991-11-22

    The usage of expert system techniques in the area of mechanical engineering design has been studied. A prototype expert system for pressure vessel design has been developed. The work has been carried out in two steps. Firstly, a pre-processor for the finite element system PCFEMP, named INFEMP, was developed. Secondly, an expert supported system for pressure vessel design, named PVES, was developed. Both INFEMP and PVES are integrated to the AutoCAD system, and AutoCAD`s language AutoLISP has been used. A practical example has been investigated to demonstrate the principal ideas of the prototype. (au).

  2. A prototype knowledge based system for pressure vessel design

    Energy Technology Data Exchange (ETDEWEB)

    Gunnarsson, L.

    1991-11-22

    The usage of expert system techniques in the area of mechanical engineering design has been studied. A prototype expert system for pressure vessel design has been developed. The work has been carried out in two steps. Firstly, a pre-processor for the finite element system PCFEMP, named INFEMP, was developed. Secondly, an expert supported system for pressure vessel design, named PVES, was developed. Both INFEMP and PVES are integrated to the AutoCAD system, and AutoCAD's language AutoLISP has been used. A practical example has been investigated to demonstrate the principal ideas of the prototype. (au).

  3. A prototype knowledge based system for pressure vessel design

    International Nuclear Information System (INIS)

    Gunnarsson, L.

    1991-01-01

    The usage of expert system techniques in the area of mechanical engineering design has been studied. A prototype expert system for pressure vessel design has been developed. The work has been carried out in two steps. Firstly, a pre-processor for the finite element system PCFEMP, named INFEMP, was developed. Secondly, an expert supported system for pressure vessel design, named PVES, was developed. Both INFEMP and PVES are integrated to the AutoCAD system, and AutoCAD's language AutoLISP has been used. A practical example has been investigated to demonstrate the principal ideas of the prototype. (au)

  4. Development of a component centered fault monitoring and diagnosis knowledge based system for space power system

    Science.gov (United States)

    Lee, S. C.; Lollar, Louis F.

    1988-01-01

    The overall approach currently being taken in the development of AMPERES (Autonomously Managed Power System Extendable Real-time Expert System), a knowledge-based expert system for fault monitoring and diagnosis of space power systems, is discussed. The system architecture, knowledge representation, and fault monitoring and diagnosis strategy are examined. A 'component-centered' approach developed in this project is described. Critical issues requiring further study are identified.

  5. USE OF ONTOLOGIES FOR KNOWLEDGE BASES CREATION TUTORING COMPUTER SYSTEMS

    OpenAIRE

    Cheremisina Lyubov

    2014-01-01

    This paper deals with the use of ontology for the use and development of intelligent tutoring systems. We consider the shortcomings of educational software and distance learning systems and the advantages of using ontology’s in their design. Actuality creates educational computer systems based on systematic knowledge. We consider classification of properties, use and benefits of ontology’s. Characterized approaches to the problem of ontology mapping, the first of which – manual mapping, the s...

  6. Knowledge-based operation and management of communications systems

    Science.gov (United States)

    Heggestad, Harold M.

    1988-01-01

    Expert systems techniques are being applied in operation and control of the Defense Communications System (DCS), which has the mission of providing reliable worldwide voice, data and message services for U.S. forces and commands. Thousands of personnel operate DCS facilities, and many of their functions match the classical expert system scenario: complex, skill-intensive environments with a full spectrum of problems in training and retention, cost containment, modernization, and so on. Two of these functions are: (1) fault isolation and restoral of dedicated circuits at Tech Control Centers, and (2) network management for the Defense Switched Network (the modernized dial-up voice system currently replacing AUTOVON). An expert system for the first of these is deployed for evaluation purposes at Andrews Air Force Base, and plans are being made for procurement of operational systems. In the second area, knowledge obtained with a sophisticated simulator is being embedded in an expert system. The background, design and status of both projects are described.

  7. Integrated knowledge base tool for acquisition and verification of NPP alarm systems

    International Nuclear Information System (INIS)

    Park, Joo Hyun; Seong, Poong Hyun

    1998-01-01

    Knowledge acquisition and knowledge base verification are important activities in developing knowledge-based systems such as alarm processing systems. In this work, we developed the integrated tool, for knowledge acquisition and verification of NPP alarm processing systems, by using G2 tool. The tool integrates document analysis method and ECPN matrix analysis method, for knowledge acquisition and knowledge verification, respectively. This tool enables knowledge engineers to perform their tasks from knowledge acquisition to knowledge verification consistently

  8. Knowledge-Based Management System and Dearth of Flexible ...

    African Journals Online (AJOL)

    PROF. OLIVER OSUAGWA

    2015-12-01

    Dec 1, 2015 ... West African Journal of Industrial & Academic Research Vol.15 No.1 December ... management system model that can be deployed to design a ..... production is not suitable for present ..... Manufacture and Design [67]) is.

  9. A knowledge-based approach to identification and adaptation in dynamical systems control

    Science.gov (United States)

    Glass, B. J.; Wong, C. M.

    1988-01-01

    Artificial intelligence techniques are applied to the problems of model form and parameter identification of large-scale dynamic systems. The object-oriented knowledge representation is discussed in the context of causal modeling and qualitative reasoning. Structured sets of rules are used for implementing qualitative component simulations, for catching qualitative discrepancies and quantitative bound violations, and for making reconfiguration and control decisions that affect the physical system. These decisions are executed by backward-chaining through a knowledge base of control action tasks. This approach was implemented for two examples: a triple quadrupole mass spectrometer and a two-phase thermal testbed. Results of tests with both of these systems demonstrate that the software replicates some or most of the functionality of a human operator, thereby reducing the need for a human-in-the-loop in the lower levels of control of these complex systems.

  10. USE OF ONTOLOGIES FOR KNOWLEDGE BASES CREATION TUTORING COMPUTER SYSTEMS

    Directory of Open Access Journals (Sweden)

    Cheremisina Lyubov

    2014-11-01

    Full Text Available This paper deals with the use of ontology for the use and development of intelligent tutoring systems. We consider the shortcomings of educational software and distance learning systems and the advantages of using ontology’s in their design. Actuality creates educational computer systems based on systematic knowledge. We consider classification of properties, use and benefits of ontology’s. Characterized approaches to the problem of ontology mapping, the first of which – manual mapping, the second – a comparison of the names of concepts based on their lexical similarity and using special dictionaries. The analysis of languages available for the formal description of ontology. Considered a formal mathematical model of ontology’s and ontology consistency problem, which is that different developers for the same domain ontology can be created, syntactically or semantically heterogeneous, and their use requires a compatible broadcast or display. An algorithm combining ontology’s. The characteristic of the practical value of developing an ontology for electronic educational resources and recommendations for further research and development, such as implementation of other components of the system integration, formalization of the processes of integration and development of a universal expansion algorithms ontology’s software

  11. Distributed Knowledge Base Systems for Diagnosis and Information Retrieval.

    Science.gov (United States)

    1983-11-01

    social system metaphors State University. for distributed problem solving: Introduction to the issue. IEEE Newell. A. and Simon, H. A. (1972) Human...experts and Sriram Mahalingam wha-helped think out the probLema associated with building Auto-Mech. Research on diagnostic expert systemas for the

  12. A Prototype Knowledge-Based System for Satellite Mission Planning.

    Science.gov (United States)

    1986-12-01

    used by different groups in an operational environment. 6 II. Literature Review As management science has recognized, it is not practical to separate...schedule only one satellite per set of requirements. A -4 .............. er.- Appendix B O9perational Conce~t Usin a Knowlede -Based System There are many

  13. Uncertainty management in knowledge based systems for nondestructive testing-an example from ultrasonic testing

    International Nuclear Information System (INIS)

    Rajagopalan, C.; Kalyanasundaram, P.; Baldev Raj

    1996-01-01

    The use of fuzzy logic, as a framework for uncertainty management, in a knowledge-based system (KBS) for ultrasonic testing of austenitic stainless steels is described. Parameters that may contain uncertain values are identified. Methodologies to handle uncertainty in these parameters using fuzzy logic are detailed. The overall improvement in the performance of the knowledge-based system after incorporating fuzzy logic is discussed. The methodology developed being universal, its extension to other KBS for nondestructive testing and evaluation is highlighted. (author)

  14. A Temporal Fuzzy Logic Formalism for Knowledge Based Systems

    Directory of Open Access Journals (Sweden)

    Vasile MAZILESCU

    2012-11-01

    Full Text Available This paper shows that the influence of knowledge on new forms of work organisation can be described as mutual relationships. Different changes in work organisation also have a strong influence on the increasing importance of knowledge of different individual and collective actors in working situations. After that, we characterize a piece of basic formal system, an Extended Fuzzy Logic System (EFLS with temporal attributes, to conceptualize future DKMSs based on human imprecise for distributed just in time decisions. The approximate reasoning is perceived as a derivation of new formulas with the corresponding temporal attributes, within a fuzzy theory defined by the fuzzy set of special axioms. In a management application, the reasoning is evolutionary because of unexpected events which may change the state of the DKMS. In this kind of situations it is necessary to elaborate certain mechanisms in order to maintain the coherence of the obtained conclusions, to figure out their degree of reliability and the time domain for which these are true. These last aspects stand as possible further directions of development at a basic logic level for future technologies that must automate knowledge organizational processes.

  15. Predicting Geotechnical Investigation Using the Knowledge Based System

    Directory of Open Access Journals (Sweden)

    Bojan Žlender

    2016-01-01

    Full Text Available The purpose of this paper is to evaluate the optimal number of investigation points and each field test and laboratory test for a proper description of a building site. These optimal numbers are defined based on their minimum and maximum number and with the equivalent investigation ratio. The total increments of minimum and maximum number of investigation points for different building site conditions were determined. To facilitate the decision-making process for a number of investigation points, an Adaptive Network Fuzzy Inference System (ANFIS was proposed. The obtained fuzzy inference system considers the influence of several entry parameters and computes the equivalent investigation ratio. The developed model (ANFIS-SI can be applied to characterize any building site. The ANFIS-SI model takes into account project factors which are evaluated with a rating from 1 to 10. The model ANFIS-SI, with integrated recommendations can be used as a systematic decision support tool for engineers to evaluate the number of investigation points, field tests, and laboratory tests for a proper description of a building site. The determination of the optimal number of investigative points and the optimal number of each field test and laboratory test is presented on reference case.

  16. A knowledge-based system for controlling automobile traffic

    Science.gov (United States)

    Maravas, Alexander; Stengel, Robert F.

    1994-01-01

    Transportation network capacity variations arising from accidents, roadway maintenance activity, and special events as well as fluctuations in commuters' travel demands complicate traffic management. Artificial intelligence concepts and expert systems can be useful in framing policies for incident detection, congestion anticipation, and optimal traffic management. This paper examines the applicability of intelligent route guidance and control as decision aids for traffic management. Basic requirements for managing traffic are reviewed, concepts for studying traffic flow are introduced, and mathematical models for modeling traffic flow are examined. Measures for quantifying transportation network performance levels are chosen, and surveillance and control strategies are evaluated. It can be concluded that automated decision support holds great promise for aiding the efficient flow of automobile traffic over limited-access roadways, bridges, and tunnels.

  17. Knowledge-based system for detailed blade design of turbines

    Science.gov (United States)

    Goel, Sanjay; Lamson, Scott

    1994-03-01

    system (TBOS) is developed using the described methodology of coupling knowledge engineering with multiple search techniques for blade shape optimization. TBOS removes a major bottleneck in the design cycle by performing multiple design optimizations in parallel, and improves design quality at the same time. TBOS not only improves the design but also the designers' quality of work by taking the mundane repetitive task of design iterations away and leaving them more time for innovative design.

  18. A Knowledge-Base for a Personalized Infectious Disease Risk Prediction System.

    Science.gov (United States)

    Vinarti, Retno; Hederman, Lucy

    2018-01-01

    We present a knowledge-base to represent collated infectious disease risk (IDR) knowledge. The knowledge is about personal and contextual risk of contracting an infectious disease obtained from declarative sources (e.g. Atlas of Human Infectious Diseases). Automated prediction requires encoding this knowledge in a form that can produce risk probabilities (e.g. Bayesian Network - BN). The knowledge-base presented in this paper feeds an algorithm that can auto-generate the BN. The knowledge from 234 infectious diseases was compiled. From this compilation, we designed an ontology and five rule types for modelling IDR knowledge in general. The evaluation aims to assess whether the knowledge-base structure, and its application to three disease-country contexts, meets the needs of personalized IDR prediction system. From the evaluation results, the knowledge-base conforms to the system's purpose: personalization of infectious disease risk.

  19. A method of knowledge base verification for nuclear power plant expert systems using extended Petri Nets

    International Nuclear Information System (INIS)

    Kwon, I. W.; Seong, P. H.

    1996-01-01

    The adoption of expert systems mainly as operator supporting systems is becoming increasingly popular as the control algorithms of system become more and more sophisticated and complicated. The verification phase of knowledge base is an important part for developing reliable expert systems, especially in nuclear industry. Although several strategies or tools have been developed to perform potential error checking, they often neglect the reliability of verification methods. Because a Petri net provides a uniform mathematical formalization of knowledge base, it has been employed for knowledge base verification. In this work, we devise and suggest an automated tool, called COKEP(Checker of Knowledge base using Extended Petri net), for detecting incorrectness, inconsistency, and incompleteness in a knowledge base. The scope of the verification problem is expended to chained errors, unlike previous studies that assume error incidence to be limited to rule pairs only. In addition, we consider certainty factor in checking, because most of knowledge bases have certainly factors. 8 refs,. 2 figs,. 4 tabs. (author)

  20. SIIA: a knowledge-based assistant for the SAFT ultrasonic inspection system(a)

    International Nuclear Information System (INIS)

    Melton, R.B.; Doctor, S.R.; Taylor, T.T.; Badalamente, R.V.

    1987-01-01

    SIIA(b) is a knowledge-based system designed to assist in making the operation of the Synthetic Aperture Focussing Technique (SAFT) Ultrasonic Inspection System more reliable and efficient. This paper reports on their effort to develop a prototype version of SIIA to demonstrate the feasibility of using knowledge-based systems in nondestructive evaluation (NDE). The first section of the paper describes the structure of the problem and their conceptual design of the knowledge-based system. The next section describes the current state of the prototype SIIA system and relates some of their experiences in developing the system. The final section discusses their plans for future development of SIIA and the implications of this type of system for other NDE techniques and applications

  1. Knowledge-based full-automatic control system for a nuclear ship reactor

    International Nuclear Information System (INIS)

    Shimazaki, J.; Nakazawa, T.; Yabuuchi, N.

    2000-01-01

    Plant operations aboard nuclear ships require quick judgements and actions due to changing marine conditions such as wind, waves and currents. Furthermore, additional human support is not available for nuclear ship operation at sea, so advanced automatic operations are necessary to reduce the number of operators required finally. Therefore, an advanced automatic operating system has been developed based on operational knowledge of nuclear ship 'Mutsu' plant. The advanced automatic operating system includes both the automatic operation system and the operator-support system which assists operators in completing actions during plant accidents, anomaly diagnosis and plant supervision. These system are largely being developed using artificial intelligent techniques such as neural network, fuzzy logic and knowledge-based expert. The automatic operation system is fundamentally based upon application of an operator's knowledge of both normal (start-up to rated power level) and abnormal (after scram) operations. Comparing plant behaviors from start-up to power level by the automatic operation with by 'Mutsu' manual operation, stable automatic operation was obtained almost same as manual operation within all operating limits. The abnormal automatic system was for hard work of manual operations after scram or LOCA accidents. An integrating system with the normal and the abnormal automatic systems are being developed for interacting smoothly both systems. (author)

  2. An approach to build a knowledge base for reactor diagnostic system using statistical method

    International Nuclear Information System (INIS)

    Yokobayashi, Masao; Matsumoto, Kiyoshi; Kohsaka, Atsuo

    1988-01-01

    In the development of a rule-based expert system, one of the key issues is how to acquire knowledge and to build a knowledge base. When the knowledge base of DISKET was built, which is an expert system for nuclear reactor accident diagnosis developed in Japan Atomic Energy Research Institute, several problems have been experienced. To write rules is a time-consuming task, and it was difficult to keep the objectivity and consistency of rules as the number of rules increased. Certainty factors must be determined often according to engineering judgement, i.e. empirically or intuitively. A systematic approach was attempted to cope with these difficulties and to build efficiently an objective knowledge base. The approach described in this paper is based on the concept that a prototype knowledge base, colloquially speaking an initial guess, should first be generated in a systematic way, then it is modified or improved by human experts for practical use. Factor analysis was used as the systematic way. DISKET system, the procedure of building a knowledge base, and the verification of the approach are reported. (Kako, I.)

  3. Dacfood: a knowledge-based system for decision support in case of radiological contamination of foodstuffs

    International Nuclear Information System (INIS)

    Diaz, A.; Despres, A.; Soulatges, D.

    1991-01-01

    In case of radiological contamination of foodstuffs, the introduction of a countermeasure has to be justified by balancing its advantages and drawbacks, as recommended by ICRP. Also, to provide authorities with information about the decision context, it has been decided to develop a Decision Support System (DSS). A knowledge-based approach is used for the DSS. Indeed, it allows: . better modelling thanks to, for instance, object oriented programming and rules, . ability to introduce more knowledge thanks to an easier consistency and validity control of the knowledge base, . handling of uncertainties (incomplete, uncertain or evolving knowledge). The present state of the system is presented. DACFOOD is a decision aiding system for contamined foodstuffs, based on a knowledge-based approach. A demonstration model has been developed in a post-Chernobyl CEC research program. It evaluates the sanitary situation, the alternative actions through costs and sanitary effects, and gives information on the decisional background

  4. Knowledge-based software design for Defense-in-Depth risk monitor system and application for AP1000

    International Nuclear Information System (INIS)

    Ma Zhanguo; Yoshikawa, Hidekazu; Yang Ming; Nakagawa, Takashi

    2017-01-01

    As part of the new risk monitor system, the software for the plant Defense-in-Depth (DiD) risk monitor system was designed based on the state-transition and finite-state machine, and then the knowledge-based software was developed by object-oriented method utilizing the Unified Modeling Language (UML). Currently, there are mainly two functions in the developed plant DiD risk monitor software that are knowledge-base editor which is used to model the system in a hierarchical manner and the interaction simulator that simulates the interactions between the different actors in the model. In this paper, a model for playing its behavior is called an Actor which is modeled at the top level. The passive safety AP1000 power plant was studied and the small-break loss-of-coolant accident (SBLOCA) design basis accident transient is modeled using the plant DiD risk monitor software. Furthermore, the simulation result is shown for the interactions between the actors which are defined in the plant DiD risk monitor system as PLANT actor, OPERATOR actor, and SUPERVISOR actor. This paper shows that it is feasible to model the nuclear power plant knowledge base using the software modeling technique. The software can make the large knowledge base for the nuclear power plant with small effort. (author)

  5. A knowledge based operator support system for emergency conditions in nuclear power plants

    International Nuclear Information System (INIS)

    Venkatesh Babu, C.; Subramanium, K.

    1992-01-01

    The control centres of the operating Indian nuclear power plants contain a large number of indicators and controls spread over many panels. In the event of onset of an emergency condition, there results a profusion of information, both numeric and symbolic. The operator may succumb to an information and cognitive overload that may be compounded by a lack of knowledge. The failure to apply knowledge and reasoning to solve an operational problem can lead to human error, which has been a major contributing factor in nuclear accidents. From the viewpoint of Artificial Intelligence, human error occurs if the operational problem requires computing resources that exceed human capabilities. The application of Artificial Intelligence, particularly expert systems, to nuclear power plant control room activities has considerable potential to reduce operator error and improve safety and reliability. The purpose of this paper is to discuss an investigative study of the feasibility of developing an operator support system incorporating Artificial Intelligence techniques. An information processing model of such a system, herein designated as Knowledge Based Operator Support System - KBOSS, employing expert systems technology, has been developed. The features of this system are described, and issues involved in its development are discussed. (author). 2 refs., 5 figs., 1 tab

  6. A knowledge-based computer system for assessing new company names

    DEFF Research Database (Denmark)

    Vidal, Rene Victor Valqui; Thorsen, M.

    1990-01-01

    This paper briefly describes a knowledge-based computer system implemented at the Registry of Companies (E and S), Ministry of Industries in Denmark. The system helps E and S, on receipt of a request for registration of a new or changed company name, to check the name for acceptability. The check...

  7. Adding Learning to Knowledge-Based Systems: Taking the "Artificial" Out of AI

    Science.gov (United States)

    Daniel L. Schmoldt

    1997-01-01

    Both, knowledge-based systems (KBS) development and maintenance require time-consuming analysis of domain knowledge. Where example cases exist, KBS can be built, and later updated, by incorporating learning capabilities into their architecture. This applies to both supervised and unsupervised learning scenarios. In this paper, the important issues for learning systems-...

  8. A knowledge-based flight status monitor for real-time application in digital avionics systems

    Science.gov (United States)

    Duke, E. L.; Disbrow, J. D.; Butler, G. F.

    1989-01-01

    The Dryden Flight Research Facility of the National Aeronautics and Space Administration (NASA) Ames Research Center (Ames-Dryden) is the principal NASA facility for the flight testing and evaluation of new and complex avionics systems. To aid in the interpretation of system health and status data, a knowledge-based flight status monitor was designed. The monitor was designed to use fault indicators from the onboard system which are telemetered to the ground and processed by a rule-based model of the aircraft failure management system to give timely advice and recommendations in the mission control room. One of the important constraints on the flight status monitor is the need to operate in real time, and to pursue this aspect, a joint research activity between NASA Ames-Dryden and the Royal Aerospace Establishment (RAE) on real-time knowledge-based systems was established. Under this agreement, the original LISP knowledge base for the flight status monitor was reimplemented using the intelligent knowledge-based system toolkit, MUSE, which was developed under RAE sponsorship. Details of the flight status monitor and the MUSE implementation are presented.

  9. Development of an integrated knowledge-base and its management tool for computerized alarm processing system

    International Nuclear Information System (INIS)

    Heo, Gyun Young; Choi, Seong Soo; Kim, Han Gon; Chang, Soon Heung

    1997-01-01

    For a long time, a number of alarm processing techniques have been researched to reduce the number of actuated alarms for operators to deal with effectively during the abnormal as well as the normal conditions. However, the strategy that the only systems with a few clear technologies should be used as a part of an alarm annunciation system has been adopted considering the effectiveness and the reliability in actual alarm processing systems. Therefore, alarm processing systems have difficult knowledge-base maintenance problems and limited expansion or enhancement defects. To solve these shortcomings, the integrated knowledge-base which can express the general information related to all the alarm processing techniques is proposed and its management tool, Knowledge Input Tool for Alarm (KIT-A) which can handle the data of the knowledge-base efficiently is developed. Since the integrated knowledge-base with KIT-A can manipulate all the alarm information without the modification of alarm processing system itself, it is expected to considerably advance the overall capability of maintenance and enhancement of the alarm processing systems

  10. Knowledge-based and integrated monitoring and diagnosis in autonomous power systems

    Science.gov (United States)

    Momoh, J. A.; Zhang, Z. Z.

    1990-01-01

    A new technique of knowledge-based and integrated monitoring and diagnosis (KBIMD) to deal with abnormalities and incipient or potential failures in autonomous power systems is presented. The KBIMD conception is discussed as a new function of autonomous power system automation. Available diagnostic modelling, system structure, principles and strategies are suggested. In order to verify the feasibility of the KBIMD, a preliminary prototype expert system is designed to simulate the KBIMD function in a main electric network of the autonomous power system.

  11. Knowledge management: An abstraction of knowledge base and database management systems

    Science.gov (United States)

    Riedesel, Joel D.

    1990-01-01

    Artificial intelligence application requirements demand powerful representation capabilities as well as efficiency for real-time domains. Many tools exist, the most prevalent being expert systems tools such as ART, KEE, OPS5, and CLIPS. Other tools just emerging from the research environment are truth maintenance systems for representing non-monotonic knowledge, constraint systems, object oriented programming, and qualitative reasoning. Unfortunately, as many knowledge engineers have experienced, simply applying a tool to an application requires a large amount of effort to bend the application to fit. Much work goes into supporting work to make the tool integrate effectively. A Knowledge Management Design System (KNOMAD), is described which is a collection of tools built in layers. The layered architecture provides two major benefits; the ability to flexibly apply only those tools that are necessary for an application, and the ability to keep overhead, and thus inefficiency, to a minimum. KNOMAD is designed to manage many knowledge bases in a distributed environment providing maximum flexibility and expressivity to the knowledge engineer while also providing support for efficiency.

  12. A knowledge based system for linking information to support decision making in construction

    NARCIS (Netherlands)

    Al-Jibouri, Saad H.S.; Mawdesley, Michael J.

    2002-01-01

    This work describes the development of a project model centred on the information and knowledge generated and used by managers. It describes a knowledge-based system designed for this purpose. A knowledge acquisition exercise was undertaken to determine the tasks of project managers and the

  13. Using the Knowledge Base of Health Services Research to Redefine Health Care Systems.

    Science.gov (United States)

    Brook, Robert H; Vaiana, Mary E

    2015-10-01

    This Perspective discusses 12 key facts derived from 50 years of health services research and argues that this knowledge base can stimulate innovative thinking about how to make health care systems safer, more efficient, more cost effective, and more patient centered, even as they respond to the needs of diverse communities.

  14. Modal Change Logic (MCL) : Specifying the reasoning of knowledge-based systems

    NARCIS (Netherlands)

    Fensel, D; Groenboom, H.M; Renardel de Lavalette, G.R.

    We investigate the formal specification of the reasoning process of knowledge-based systems in this paper. We analyze the corresponding parts of the KADS specification languages KARL and (ML)(2) and deduce some general requirements. The essence of these languages is that they integrate a declarative

  15. The use of legal knowledge-based systems in public administration: what can go wrong?

    NARCIS (Netherlands)

    de Bruin, Hugo; Prakken, Henry; Svensson, Jorgen S.; Bench-Capon, Trevor J.M.; Daskalopulu, Aspassia; Winkels, Radboud

    2002-01-01

    In recent years, practical applications of legal knowledge-based systems have become increasingly common. This raises the issue of their functioning in practice and their actual influence on the quality of decisions. In this paper we investigate to what extent incorrect decisions may be caused by

  16. Fuzzy Linguistic Knowledge Based Behavior Extraction for Building Energy Management Systems

    Energy Technology Data Exchange (ETDEWEB)

    Dumidu Wijayasekara; Milos Manic

    2013-08-01

    Significant portion of world energy production is consumed by building Heating, Ventilation and Air Conditioning (HVAC) units. Thus along with occupant comfort, energy efficiency is also an important factor in HVAC control. Modern buildings use advanced Multiple Input Multiple Output (MIMO) control schemes to realize these goals. However, since the performance of HVAC units is dependent on many criteria including uncertainties in weather, number of occupants, and thermal state, the performance of current state of the art systems are sub-optimal. Furthermore, because of the large number of sensors in buildings, and the high frequency of data collection, large amount of information is available. Therefore, important behavior of buildings that compromise energy efficiency or occupant comfort is difficult to identify. This paper presents an easy to use and understandable framework for identifying such behavior. The presented framework uses human understandable knowledge-base to extract important behavior of buildings and present it to users via a graphical user interface. The presented framework was tested on a building in the Pacific Northwest and was shown to be able to identify important behavior that relates to energy efficiency and occupant comfort.

  17. Network Structures in a Society Composed of Individuals with Utilities DependingStudy of Object-Oriented Model for the Knowledge Base System

    OpenAIRE

    Mingwei, Zhao; Yanzhong, Dang

    2005-01-01

    Based on the analysis of object-oriented model, knowledge base and knowledge base system by using theories on object-oriented and knowledge base, the relationships between object-oriented model and knowledge base are discussed in this paper. The architecture of object-oriented knowledge system is proposed and the Rule-Case-Based Reasoning knowledge base system is designed.

  18. An assessment of maintainability of elevator system to improve facilities management knowledge-base

    Science.gov (United States)

    Siti, N. A.; Asmone, A. S.; Chew, M. Y. L.

    2018-02-01

    Elevator system is a highly specialized machinery that requires technicians that have a wider array of knowledge in maintaining the system to be safe and reliable. While attaining reliable data of elevator malfunction become challenges, this study has filled the gap by gathering the management-maintenance issues and operational defects of elevator system. Forty-three types of operation defects were found and the consequence defects and their possible causes of occurrences were discussed. To respond to the prime challenges of maintaining elevator system provided by the industry players’ perspective, a theoretical framework is established as a recommendation to improve knowledge base of defects in elevator system which comprises good practices, and solutions to rectify each defects found. Hence, this research paper has theoretically improved the knowledge base of maintainability of elevator system and provide meaningful guidelines in practical senses to the industry professionals.

  19. Study on large scale knowledge base with real time operation for autonomous nuclear power plant. 1. Basic concept and expecting performance

    International Nuclear Information System (INIS)

    Ozaki, Yoshihiko; Suda, Kazunori; Yoshikawa, Shinji; Ozawa, Kenji

    1996-04-01

    Since it is desired to enhance availability and safety of nuclear power plants operation and maintenance by removing human factor, there are many researches and developments for intelligent operation or diagnosis using artificial intelligence (AI) technique. We have been developing an autonomous operation and maintenance system for nuclear power plants by substituting AI's and intelligent robots. It is indispensable to use various and large scale knowledge relative to plant design, operation, and maintenance, that is, whole life cycle data of the plant for the autonomous nuclear power plant. These knowledge must be given to AI system or intelligent robots adequately and opportunely. Moreover, it is necessary to insure real time operation using the large scale knowledge base for plant control and diagnosis performance. We have been studying on the large scale and real time knowledge base system for autonomous plant. In the report, we would like to present the basic concept and expecting performance of the knowledge base for autonomous plant, especially, autonomous control and diagnosis system. (author)

  20. Integrative pathway knowledge bases as a tool for systems molecular medicine.

    Science.gov (United States)

    Liang, Mingyu

    2007-08-20

    There exists a sense of urgency to begin to generate a cohesive assembly of biomedical knowledge as the pace of knowledge accumulation accelerates. The urgency is in part driven by the emergence of systems molecular medicine that emphasizes the combination of systems analysis and molecular dissection in the future of medical practice and research. A potentially powerful approach is to build integrative pathway knowledge bases that link organ systems function with molecules.

  1. Knowledge-Based Systems for the Assessment and Management of Bridge Structures

    DEFF Research Database (Denmark)

    Miyamoto, A.; Thoft-Christensen, Palle; Yan, B.

    2004-01-01

    . The aim of this paper is to summarize the finding of up-to-date research articles concerning the application of knowledge-based systems to assessment and management of structures and to illustrate the potential of such systems in the structural engineering. Two modern bridge management systems (BMS......It is becoming an important social problem to make maintenance and rehabilitation of existing infrastructures such as bridges, buildings, etc. The kernel of such structure management is to develop a method of safety assessment on items which include remaining life and load carrying capacity......'s) are presented in the paper. The first is a BMS to assess the performance and derive optimal strategies for inspection and maintenance of concrete structures using reliability based and knowledge based systems. The second is the concrete bridge rating expert system (BREX) to evaluate the performance of existing...

  2. MOVES: A knowledge-based system for maintenance planning for motor-operated valves

    International Nuclear Information System (INIS)

    Winter, M.

    1987-01-01

    Over the past several years, knowledge-based expert systems have emerged as an important part of the general research area known as artificial intelligence. This paper describes a cooperative effort between faculty members at Iowa State University and engineers at the Duane Arnold Energy Center [a 545-MW(electric) boiling water reactor operated by Iowa Electric Light and Power Company] to explore the development of an advisory system for valve maintenance planning. This knowledge-based program, known as Motor-Operated Valves Expert System (MOVES), has a data base that currently includes safety-related motor-operated valves (∼117 valves). Valve maintenance was selected as the subject for the expert system because of the importance of valves in nuclear plant and their impact of plant availability. MOVES is being developed using the microcomputer-(IBM compatible) based expert system tool INSIGHT2+. The authors have found that the project benefits both the university and the utility

  3. Studies on learning by detecting impasse and by resulting it for building large scale knowledge base for autonomous plant

    International Nuclear Information System (INIS)

    Sawaragi, Tetsuo

    1997-03-01

    The acquisition of knowledge from human experts in an exhaustive way is extremely difficult, and even if it were possible, the maintenance of such a large knowledge base for realtime operation is not an easy task. The autonomous system having just incomplete knowledge would face with so many problems that contradicts with the system's current beliefs and/or are novel or unknown to the system. Experienced humans can manage to do with such novelty due to their generalizing ability and analogical inference based on the repertoire of precedents, even if they with new problems. Moreover, through experiencing such breakdowns and impasse, they can acquire some novel knowledge by their proactive attempts to interpret a provided problem as well as by updating their beliefs and contents and organization of their prior knowledge. We call such a style of learning as impasse-driven learning, meaning that learning dose occur being motivated by facing with contradiction and impasse. The related studies concerning with such a style of leaning have been studied within a field of machine learning of artificial intelligence so far as well as within a cognitive science field. In this paper, we at first summarize an outline of machine learning methodologies, and then, we detail about the impasse-driven learning. We discuss that from two different perspective of learning, one is from deductive and analogical learning and the other one is from inductive conceptual learning (i.e., concept formation or generalization-based memory). The former mainly discuss about how the learning system updates its prior beliefs and knowledge so that it can explain away the current contradiction using some meta-cognition heuristics. The latter attempts to assimilate a contradicting problem into its prior memory structure by dynamically reorganizing a collection of the precedents. We present those methodologies, and finally we introduce a case study of concept formation for plant anomalies and its usage for

  4. A knowledge based on-line diagnostic system for the fast breeder reactor KNKII

    International Nuclear Information System (INIS)

    Eggert, H.; Scherer, K.P.; Stiller, P.

    1989-01-01

    In the nuclear research center at Karlsruhe, a diagnostic expert system is developed to supervise a fast breeder process (KNKII). The problem is to detect critical phases in the beginning state before fault propagation. The expert system itself is integrated in a computer network (realized by a local area network), where different computers are involved as special detection systems (for example acoustic noise, temperature noise, covergas monitoring and so on), which produce partial diagnoses, based on intelligent signal processing techniques like pattern recognition. Additional to the detection systems a process computer is integrated as well as a test computer, which simulates hypothetical and real fault data. On the logical top level the expert system manages the partial diagnoses of the detection systems with the operating data of the process computer and to produce a final diagnosis including the explanation part for operator support. The knowledge base is developed by typical Artificial Intelligence tools. Both fact based and rule based knowledge representations are stored in form of flavors and predications. The inference engine operates on a rule based approach. Specific detail knowledge, based on experience about any years, is available to influence the decision process by increasing or decreasing of the generated hypotheses. In a meta knowledge base, a rule master triggers the special domain experts and contributes the tasks to the specific rule complexes. Such a system management guarantees a problem solving strategy, which operates event triggered and situation specific in a local inference domain. (author). 3 refs, 6 figs, 2 tabs

  5. Knowledge-Based Control Systems via Internet Part I. Applications in Biotechnology

    Directory of Open Access Journals (Sweden)

    Georgi Georgiev

    2005-04-01

    Full Text Available An extensive approach towards the dissemination of expert knowledge and coordination efforts to distributed points and seamless integration of control strategies applied to distributed yet identical systems is crucial to enhance overall efficiency and operational costs. Application of Knowledge-Based Control System via Internet will be very efficient especially in biotechnology, because many industrial bioprocesses, based on the same technological principles, are distributed in the whole world. Brewing industry oriented practical solutions illustrate this approach.

  6. Development of a knowledge-based information management system for plant maintenance

    International Nuclear Information System (INIS)

    Yim, Hyung Sang; Park, Young Jae; Lee, Sang Min; Choi, Jae Boong; Kim, Young Jin; Roh, Eun Chul; Lee, Byung Ine

    2003-01-01

    Recently, the importance of Plant Maintenance(PM) was highly raised to provide efficient plant operation which highly affects the productivity. For this reason, a number of engineering methodologies, such as Risk-Based Inspection(RBI), Fitness For Service guidelines(FFS), Plant Lifecycle Management(PLM), have been applied to improve the plant operation efficiency. Also, a network-based business operation system, which is called ERP(Enterprise Resource Planning), has been introduced in the field of plant maintenance. However, there was no attempt to connect engineering methodologies to the ERP PM system. In this paper, a knowledge-based information system for the plant operation of steel making company has been proposed. This system, which is named as K-VRS(Knowledge-based Virtual Reality System), provides a connection between ERP plant maintenance module and knowledge-based engineering methodologies, and thus, enables network-based highly effective plant maintenance process. The developed system is expected to play a great role for more efficient and safer plant maintenance

  7. An overview of a knowledge based system for preventive maintenance support of nuclear power plants

    International Nuclear Information System (INIS)

    Terano, Takao; Nishiyama, Takuya; Yokoo, Takeshi

    1984-01-01

    In recent years, much interest has been paid to knowledge engineering techniques for new vehicles of advanced information processing. As a practical application in electric power industry, this report discusses a knowledge based system for supporting preventive maintenance of nuclear power plants. To support preventive maintenance tasks, the system must have facilities to reason failures and accidents of the plants, to evaluate their significance, to predict any possible troubles, and to indentify appropriate preventive countermeasures for them. This report describes the overview of the prototype system from a viewpoint of knowledge engineering. The results of the study are as follows: (1) The knowledge base of the prototype system consists of a data-base on plants and a rule-base derived from experts' knowledge. Using the information in the knowledge base, the system diagnoses the plant without real-time interaction with operational plants. (2) Expert's knowledge in the rule-base is represented in the non-procedural declarative forms. These rules are organized in some hierarchical structure so as to be used efficiently and used in conjunction with the corresponding set of plant information in the data-base. (3) The prototype system is incrementally developed with the rapid prototyping techniques, that is, the processes of design, implementation and evaluation are repeated several times. (author)

  8. Development of a knowledge-based information management system for plant maintenance

    Energy Technology Data Exchange (ETDEWEB)

    Yim, Hyung Sang; Park, Young Jae; Lee, Sang Min; Choi, Jae Boong; Kim, Young Jin [Sungkyunkwan Univ., Seoul (Korea, Republic of); Roh, Eun Chul; Lee, Byung Ine [Pohang Iron and Steel Company, Pohang (Korea, Republic of)

    2003-07-01

    Recently, the importance of Plant Maintenance(PM) was highly raised to provide efficient plant operation which highly affects the productivity. For this reason, a number of engineering methodologies, such as Risk-Based Inspection(RBI), Fitness For Service guidelines(FFS), Plant Lifecycle Management(PLM), have been applied to improve the plant operation efficiency. Also, a network-based business operation system, which is called ERP(Enterprise Resource Planning), has been introduced in the field of plant maintenance. However, there was no attempt to connect engineering methodologies to the ERP PM system. In this paper, a knowledge-based information system for the plant operation of steel making company has been proposed. This system, which is named as K-VRS(Knowledge-based Virtual Reality System), provides a connection between ERP plant maintenance module and knowledge-based engineering methodologies, and thus, enables network-based highly effective plant maintenance process. The developed system is expected to play a great role for more efficient and safer plant maintenance.

  9. Delivering spacecraft control centers with embedded knowledge-based systems: The methodology issue

    Science.gov (United States)

    Ayache, S.; Haziza, M.; Cayrac, D.

    1994-01-01

    Matra Marconi Space (MMS) occupies a leading place in Europe in the domain of satellite and space data processing systems. The maturity of the knowledge-based systems (KBS) technology, the theoretical and practical experience acquired in the development of prototype, pre-operational and operational applications, make it possible today to consider the wide operational deployment of KBS's in space applications. In this perspective, MMS has to prepare the introduction of the new methods and support tools that will form the basis of the development of such systems. This paper introduces elements of the MMS methodology initiatives in the domain and the main rationale that motivated the approach. These initiatives develop along two main axes: knowledge engineering methods and tools, and a hybrid method approach for coexisting knowledge-based and conventional developments.

  10. The fault monitoring and diagnosis knowledge-based system for space power systems: AMPERES, phase 1

    Science.gov (United States)

    Lee, S. C.

    1989-01-01

    The objective is to develop a real time fault monitoring and diagnosis knowledge-based system (KBS) for space power systems which can save costly operational manpower and can achieve more reliable space power system operation. The proposed KBS was developed using the Autonomously Managed Power System (AMPS) test facility currently installed at NASA Marshall Space Flight Center (MSFC), but the basic approach taken for this project could be applicable for other space power systems. The proposed KBS is entitled Autonomously Managed Power-System Extendible Real-time Expert System (AMPERES). In Phase 1 the emphasis was put on the design of the overall KBS, the identification of the basic research required, the initial performance of the research, and the development of a prototype KBS. In Phase 2, emphasis is put on the completion of the research initiated in Phase 1, and the enhancement of the prototype KBS developed in Phase 1. This enhancement is intended to achieve a working real time KBS incorporated with the NASA space power system test facilities. Three major research areas were identified and progress was made in each area. These areas are real time data acquisition and its supporting data structure; sensor value validations; development of inference scheme for effective fault monitoring and diagnosis, and its supporting knowledge representation scheme.

  11. THEXSYST - a knowledge based system for the control and analysis of technical simulation calculations

    International Nuclear Information System (INIS)

    Burger, B.

    1991-07-01

    This system (THEXSYST) will be used for control, analysis and presentation of thermal hydraulic simulation calculations of light water reactors. THEXSYST is a modular system consisting of an expert shell with user interface, a data base, and a simulation program and uses techniques available in RSYST. A knowledge base, which was created to control the simulational calculation of pressurized water reactors, includes both the steady state calculation and the transient calculation in the domain of the depressurization, as a result of a small break loss of coolant accident. The methods developed are tested using a simulational calculation with RELAP5/Mod2. It will be seen that the application of knowledge base techniques may be a helpful tool to support existing solutions especially in graphical analysis. (orig./HP) [de

  12. Knowledge bases, clinical decision support systems, and rapid learning in oncology.

    Science.gov (United States)

    Yu, Peter Paul

    2015-03-01

    One of the most important benefits of health information technology is to assist the cognitive process of the human mind in the face of vast amounts of health data, limited time for decision making, and the complexity of the patient with cancer. Clinical decision support tools are frequently cited as a technologic solution to this problem, but to date useful clinical decision support systems (CDSS) have been limited in utility and implementation. This article describes three unique sources of health data that underlie fundamentally different types of knowledge bases which feed into CDSS. CDSS themselves comprise a variety of models which are discussed. The relationship of knowledge bases and CDSS to rapid learning health systems design is critical as CDSS are essential drivers of rapid learning in clinical care. Copyright © 2015 by American Society of Clinical Oncology.

  13. An approach to build knowledge base for reactor accident diagnostic system using statistical method

    International Nuclear Information System (INIS)

    Kohsaka, Atsuo; Yokobayashi, Masao; Matsumoto, Kiyoshi; Fujii, Minoru

    1988-01-01

    In the development of a rule based expert system, one of key issues is how to build a knowledge base (KB). A systematic approach has been attempted for building an objective KB efficiently. The approach is based on the concept that a prototype KB should first be generated in a systematic way and then it is to be modified and/or improved by expert for practical use. The statistical method, Factor Analysis, was applied to build a prototype KB for the JAERI expert system DISKET using source information obtained from a PWR simulator. The prototype KB was obtained and the inference with this KB was performed against several types of transients. In each diagnosis, the transient type was well identified. From this study, it is concluded that the statistical method used is useful for building a prototype knowledge base. (author)

  14. Statistical method application to knowledge base building for reactor accident diagnostic system

    International Nuclear Information System (INIS)

    Yoshida, Kazuo; Yokobayashi, Masao; Matsumoto, Kiyoshi; Kohsaka, Atsuo

    1989-01-01

    In the development of a knowledge based expert system, one of key issues is how to build the knowledge base (KB) in an efficient way with keeping the objectivity of KB. In order to solve this issue, an approach has been proposed to build a prototype KB systematically by a statistical method, factor analysis. For the verification of this approach, factor analysis was applied to build a prototype KB for the JAERI expert system DISKET. To this end, alarm and process information was generated by a PWR simulator and the factor analysis was applied to this information to define taxonomy of accident hypotheses and to extract rules for each hypothesis. The prototype KB thus built was tested through inferring against several types of transients including double-failures. In each diagnosis, the transient type was well identified. Furthermore, newly introduced standards for rule extraction showed good effects on the enhancement of the performance of prototype KB. (author)

  15. Knowledge-based operation guidance system for nuclear power plants based on generic task methodology

    International Nuclear Information System (INIS)

    Yamada, Naoyuki; Chandrasekaran, B.; Bhatnager, R.

    1989-01-01

    A knowledge-based system for operation guidance of nuclear power plants is proposed. The Dynamic Procedure Management System (DPMS) is designed and developed to assist human operators interactively by selecting and modifying predefined operation procedures in a dynamic situation. Unlike most operation guidance systems, DPMS has been built based on Generic Task Methodology, which makes the overall framework of the system perspicuous and also lets domain knowledge be represented in a natural way. This paper describes the organization of the system, the definition of each task, and the form and organization of knowledge, followed by an application example. (author)

  16. A knowledge-based system framework for real-time monitoring applications

    International Nuclear Information System (INIS)

    Heaberlin, J.O.; Robinson, A.H.

    1989-01-01

    A real-time environment presents a challenge for knowledge-based systems for process monitoring with on-line data acquisition in nuclear power plants. These applications are typically data intensive. This, coupled with the dynamic nature of events on which problematic decisions are based, requires the development of techniques fundamentally different from those generally employed. Traditional approaches involve knowledge management techniques developed for static data, the majority of which is elicited directly from the user in a consultation environment. Inference mechanisms are generally noninterruptible, requiring all appropriate rules to be fired before new data can be accommodated. As a result, traditional knowledge-based applications in real-time environments have inherent problems in dealing with the time dependence of both the data and the solution process. For example, potential problems include obtaining a correct solution too late to be of use or focusing computing resources on problems that no longer exist. A knowledge-based system framework, the real-time framework (RTF), has been developed that can accommodate the time dependencies and resource trade-offs required for real-time process monitoring applications. This framework provides real-time functionality by using generalized problem-solving goals and control strategies that are modifiable during system operation and capable of accommodating feedback for redirection of activities

  17. Enroute flight-path planning - Cooperative performance of flight crews and knowledge-based systems

    Science.gov (United States)

    Smith, Philip J.; Mccoy, Elaine; Layton, Chuck; Galdes, Deb

    1989-01-01

    Interface design issues associated with the introduction of knowledge-based systems into the cockpit are discussed. Such issues include not only questions about display and control design, they also include deeper system design issues such as questions about the alternative roles and responsibilities of the flight crew and the computer system. In addition, the feasibility of using enroute flight path planning as a context for exploring such research questions is considered. In particular, the development of a prototyping shell that allows rapid design and study of alternative interfaces and system designs is discussed.

  18. Virk: An Active Learning-based System for Bootstrapping Knowledge Base Development in the Neurosciences

    Directory of Open Access Journals (Sweden)

    Kyle H. Ambert

    2013-12-01

    Full Text Available The frequency and volume of newly-published scientific literature is quickly making manual maintenance of publicly-available databases of primary data unrealistic and costly. Although machine learning can be useful for developing automated approaches to identifying scientific publications containing relevant information for a database, developing such tools necessitates manually annotating an unrealistic number of documents. One approach to this problem, active learning, builds classification models by iteratively identifying documents that provide the most information to a classifier. Although this approach has been shown to be effective for related problems, in the context of scientific databases curation, it falls short. We present Virk, an active learning system that, while being trained, simultaneously learns a classification model and identifies documents having information of interest for a knowledge base. Our approach uses a support vector machine classifier with input features derived from neuroscience-related publications from the primary literature. Using our approach, we were able to increase the size of the Neuron Registry, a knowledge base of neuron-related information, by a factor of 90%, a knowledge base of neuron-related information, in 3 months. Using standard biocuration methods, it would have taken between 1-2 years to make the same number of contributions to the Neuron Registry. Here, we describe the system pipeline in detail, and evaluate its performance against other approaches to sampling in active learning.

  19. A knowledge-based system for control of xenon-induced spatial power oscillations during load-follow operations

    International Nuclear Information System (INIS)

    Chung, Sun-Kyo; Danofsky, R.A.; Spinrad, B.I.

    1988-01-01

    As is well known, large pressurized water reactors (PWRs) are subject to xenon-induced axial power oscillations at some time during a given cycle. Attention to this behavior is required during load-follow operations. A knowledge-based system for controlling xenon-induced spatial power oscillations is described. Experience with a limited set of load-follow patterns has demonstrated that the system is capable of providing advice on appropriate control actions. A simulation model, coupled with a rule-learning process, has been found to be a useful way for determining appropriate weights for the rules that relate power patterns and control actions

  20. Knowledge based support for real time application of multiagent control and automation in electric power systems

    DEFF Research Database (Denmark)

    Saleem, Arshad; Nordstrom, Lars; Lind, Morten

    2011-01-01

    This paper presents a mechanism for developing knowledge based support for real time application of multiagent systems (MAS) in control, automation and diagnosis of electric power systems. In particular it presents a way for autonomous agents to utilize a qualitative means-ends based model...... for reasoning about control situations. The proposed mechanism has been used in different scenarios of electric power distribution system protection and control. Results show that agents can use local models of their environment and coordinate with other agents to analyze and understand a disturbance situation...

  1. Technical requirements on knowledge base and instrumentation system for decision making in plant operation and maintenance

    International Nuclear Information System (INIS)

    Kitamura, Masaharu; Yoshikawa, Shinji; Hasegawa, Makoto

    1998-03-01

    A series of technical surveys and studies are described in this report to examine and identify technical requirements to be posed on knowledge base and instrumentation system as the fundamental in high reliability computational decision making in operation and maintenance of nuclear power plants. Monitoring and diagnosis are focused as the important tasks among the operation/maintenance-related tasks. A concrete monitoring and diagnosis system configuration has been proposed consisting of distributed symptom database and of on-demand measurement subsystem. An prototype of the proposed system configuration has been successfully verified. (author)

  2. ISPE: A knowledge-based system for fluidization studies. 1990 Annual report

    Energy Technology Data Exchange (ETDEWEB)

    Reddy, S.

    1991-01-01

    Chemical engineers use mathematical simulators to design, model, optimize and refine various engineering plants/processes. This procedure requires the following steps: (1) preparation of an input data file according to the format required by the target simulator; (2) excecuting the simulation; and (3) analyzing the results of the simulation to determine if all ``specified goals`` are satisfied. If the goals are not met, the input data file must be modified and the simulation repeated. This multistep process is continued until satisfactory results are obtained. This research was undertaken to develop a knowledge based system, IPSE (Intelligent Process Simulation Environment), that can enhance the productivity of chemical engineers/modelers by serving as an intelligent assistant to perform a variety tasks related to process simulation. ASPEN, a widely used simulator by the US Department of Energy (DOE) at Morgantown Energy Technology Center (METC) was selected as the target process simulator in the project. IPSE, written in the C language, was developed using a number of knowledge-based programming paradigms: object-oriented knowledge representation that uses inheritance and methods, rulebased inferencing (includes processing and propagation of probabilistic information) and data-driven programming using demons. It was implemented using the knowledge based environment LASER. The relationship of IPSE with the user, ASPEN, LASER and the C language is shown in Figure 1.

  3. A Framework for a Multi-Faceted, Educational, Knowledge-Based Recommender System

    Directory of Open Access Journals (Sweden)

    John W. Coffey

    2016-08-01

    Full Text Available The literature on intelligent or adaptive tutoring systems generally has a focus on how to determine what resources to present to students as they make their way through a course of study. The idea of multi-faceted student modeling is that a variety of measures, both academic and non-academic, might be represented in student models in service of a broader educational context. This paper contains a framework for a multi-faceted, educational, knowledge-based recommender system, including a basic set of descriptors that the model contains, and a taxonomy of inferences that might be made over such models.

  4. Analysis, Simulation, and Verification of Knowledge-Based, Rule-Based, and Expert Systems

    Science.gov (United States)

    Hinchey, Mike; Rash, James; Erickson, John; Gracanin, Denis; Rouff, Chris

    2010-01-01

    Mathematically sound techniques are used to view a knowledge-based system (KBS) as a set of processes executing in parallel and being enabled in response to specific rules being fired. The set of processes can be manipulated, examined, analyzed, and used in a simulation. The tool that embodies this technology may warn developers of errors in their rules, but may also highlight rules (or sets of rules) in the system that are underspecified (or overspecified) and need to be corrected for the KBS to operate as intended. The rules embodied in a KBS specify the allowed situations, events, and/or results of the system they describe. In that sense, they provide a very abstract specification of a system. The system is implemented through the combination of the system specification together with an appropriate inference engine, independent of the algorithm used in that inference engine. Viewing the rule base as a major component of the specification, and choosing an appropriate specification notation to represent it, reveals how additional power can be derived from an approach to the knowledge-base system that involves analysis, simulation, and verification. This innovative approach requires no special knowledge of the rules, and allows a general approach where standardized analysis, verification, simulation, and model checking techniques can be applied to the KBS.

  5. VIP: A knowledge-based design aid for the engineering of space systems

    Science.gov (United States)

    Lewis, Steven M.; Bellman, Kirstie L.

    1990-01-01

    The Vehicles Implementation Project (VIP), a knowledge-based design aid for the engineering of space systems is described. VIP combines qualitative knowledge in the form of rules, quantitative knowledge in the form of equations, and other mathematical modeling tools. The system allows users rapidly to develop and experiment with models of spacecraft system designs. As information becomes available to the system, appropriate equations are solved symbolically and the results are displayed. Users may browse through the system, observing dependencies and the effects of altering specific parameters. The system can also suggest approaches to the derivation of specific parameter values. In addition to providing a tool for the development of specific designs, VIP aims at increasing the user's understanding of the design process. Users may rapidly examine the sensitivity of a given parameter to others in the system and perform tradeoffs or optimizations of specific parameters. A second major goal of VIP is to integrate the existing corporate knowledge base of models and rules into a central, symbolic form.

  6. Knowledge base expert system control of spatial xenon oscillations in pressurized water reactors

    International Nuclear Information System (INIS)

    Alten, S.

    1992-01-01

    Nuclear reactor operators are required to pay special attention to spatial xenon oscillations during the load-follow operation of pressurized water reactors. They are expected to observe the axial offset of the core, and to estimate the correct time and amount of necessary control action based on heuristic rules given in axial xenon oscillations are knowledge intensive, and heuristic in nature. An expert system, ACES (Axial offset Control using Expert Systems) is developed to implement a heuristic constant axial offset control procedure to aid reactor operators in increasing the plant reliability by reducing the human error component of the failure probability. ACES is written in a production system language, OPS5, based on the forward chaining algorithm. It samples reactor data with a certain time interval in terms of measurable parameters, such as the power, period, and the axial offset of the core. It then processes the core status utilizing a set of equations which are used in a back of the envelope calculations by domain experts. Heuristic rules of ACES identify the control variable to be used among the full and part length control rods and boron concentration, while a knowledge base is used to determine the amount of control. ACES is designed as a set of generic rules to avoid reducing the system into a set of patterns. Instead ACES evaluates the system, determines the necessary corrective actions in terms of reactivity insertion, and provides this reactivity insertion using the control variables. The amount of control action is determined using a knowledge base which consists of the differential rod worth curves, and the boron reactivity worth of a given reactor. Having the reactor dependent parameters in its knowledge base, ACES is applicable to an arbitrary reactor for axial offset control purposes

  7. The knowledge-based off-site emergency response system for a nuclear power plant

    International Nuclear Information System (INIS)

    Ho, L.W.; Loa, W.W.; Wang, C.L.

    1987-01-01

    A knowledge-based expert system for a nuclear power plant off-site emergency response system is described. The system incorporates the knowledge about the nuclear power plant behaviours, site environment and site geographic factors, etc. The system is developed using Chinshan nuclear power station of Taipower Company, Taiwan, ROC as a representative model. The objectives of developing this system are to provide an automated intelligent system with functions of accident simulation, prediction and with learning capabilities to supplement the actions of the emergency planners and accident managers in order to protect the plant personnel and the surrounding population, and prevent or mitigate property damages resulting from the plant accident. The system is capable of providing local and national authorities with rapid retrieval data from the site characteristics and accident progression. The system can also provide the framework for allocation of available resources and can handle the uncertainties in data and models

  8. A Very Large Area Network (VLAN) knowledge-base applied to space communication problems

    Science.gov (United States)

    Zander, Carol S.

    1988-01-01

    This paper first describes a hierarchical model for very large area networks (VLAN). Space communication problems whose solution could profit by the model are discussed and then an enhanced version of this model incorporating the knowledge needed for the missile detection-destruction problem is presented. A satellite network or VLAN is a network which includes at least one satellite. Due to the complexity, a compromise between fully centralized and fully distributed network management has been adopted. Network nodes are assigned to a physically localized group, called a partition. Partitions consist of groups of cell nodes with one cell node acting as the organizer or master, called the Group Master (GM). Coordinating the group masters is a Partition Master (PM). Knowledge is also distributed hierarchically existing in at least two nodes. Each satellite node has a back-up earth node. Knowledge must be distributed in such a way so as to minimize information loss when a node fails. Thus the model is hierarchical both physically and informationally.

  9. Knowledge based systems: A critical survey of major concepts, issues and techniques. Visuals

    Science.gov (United States)

    Dominick, Wayne D. (Editor); Kavi, Srinu

    1984-01-01

    This Working Paper Series entry represents a collection of presentation visuals associated with the companion report entitled, Knowledge Based Systems: A Critical Survey of Major Concepts, Issues, and Techniques, USL/DBMS NASA/RECON Working Paper Series report number DBMS.NASA/RECON-9. The objectives of the report are to: examine various techniques used to build the KBS; to examine at least one KBS in detail, i.e., a case study; to list and identify limitations and problems with the KBS; to suggest future areas of research; and to provide extensive reference materials.

  10. A knowledge-based approach to the design of integrated renewable energy systems

    Energy Technology Data Exchange (ETDEWEB)

    Ramakumar, R.; Abouzahr, I. (Oklahoma State Univ., Stillwater, OK (United States). Engineering Energy Lab.); Ashenayi, K. (Dept. of Electrical Engineering, Univ. of Tulsa, Tulsa, OK (United States))

    1992-12-01

    Integrated Renewable Energy Systems (IRES) utilize two or more renewable energy resources and end-use technologies to supply a variety of energy needs, often in a stand-alone mode. A knowledge-based design approach that minimizes the total capital cost at a pre-selected reliability level is presented. The reliability level is quantified by the loss of power supply probability (LPSP). The procedure includes some resource-need matching based on economics, the quality of energy needed, and the characteristics of the resource. A detailed example is presented in this paper and discussed to illustrate the usefullness of the design approach.

  11. The Research of Clinical Decision Support System Based on Three-Layer Knowledge Base Model

    Directory of Open Access Journals (Sweden)

    Yicheng Jiang

    2017-01-01

    Full Text Available In many clinical decision support systems, a two-layer knowledge base model (disease-symptom of rule reasoning is used. This model often does not express knowledge very well since it simply infers disease from the presence of certain symptoms. In this study, we propose a three-layer knowledge base model (disease-symptom-property to utilize more useful information in inference. The system iteratively calculates the probability of patients who may suffer from diseases based on a multisymptom naive Bayes algorithm, in which the specificity of these disease symptoms is weighted by the estimation of the degree of contribution to diagnose the disease. It significantly reduces the dependencies between attributes to apply the naive Bayes algorithm more properly. Then, the online learning process for parameter optimization of the inference engine was completed. At last, our decision support system utilizing the three-layer model was formally evaluated by two experienced doctors. By comparisons between prediction results and clinical results, our system can provide effective clinical recommendations to doctors. Moreover, we found that the three-layer model can improve the accuracy of predictions compared with the two-layer model. In light of some of the limitations of this study, we also identify and discuss several areas that need continued improvement.

  12. DIVA and DIAPO: two diagnostic knowledge based systems used for French nuclear power plants

    International Nuclear Information System (INIS)

    Porcheron, M.; Ricard, B.; Joussellin, A.

    1997-01-01

    In order to improve monitoring and diagnosis capabilities in nuclear power plants, Electricite de France (EDF) has designed an integrated monitoring and diagnosis assistance system: PSAD-Poste de Surveillance et d'Aide au Diagnostic. The development of such a sophisticated monitoring and data processing systems has emphasized the need for the addition of analysis and diagnosis assistance capabilities. Therefore, diagnostic knowledge based systems have been added to the functions monitored in PSAD: DIVA for turbine generators, and DIAPO for reactor coolant pumps. These systems were designed from a representation of the diagnostic reasoning process of experts and of the supporting knowledge. Diagnosis in both systems relies on an abduction reasoning process applied to component fault models and observations derived from their actual behavior, as provided by the monitoring functions. The basic theoretical elements of this diagnostic model are summarized in a first part. In a second part, DIVA and DIAPO specific elements are described

  13. New developments of a knowledge based system (VEG) for inferring vegetation characteristics

    Science.gov (United States)

    Kimes, D. S.; Harrison, P. A.; Harrison, P. R.

    1992-01-01

    An extraction technique for inferring physical and biological surface properties of vegetation using nadir and/or directional reflectance data as input has been developed. A knowledge-based system (VEG) accepts spectral data of an unknown target as input, determines the best strategy for inferring the desired vegetation characteristic, applies the strategy to the target data, and provides a rigorous estimate of the accuracy of the inference. Progress in developing the system is presented. VEG combines methods from remote sensing and artificial intelligence, and integrates input spectral measurements with diverse knowledge bases. VEG has been developed to (1) infer spectral hemispherical reflectance from any combination of nadir and/or off-nadir view angles; (2) test and develop new extraction techniques on an internal spectral database; (3) browse, plot, or analyze directional reflectance data in the system's spectral database; (4) discriminate between user-defined vegetation classes using spectral and directional reflectance relationships; and (5) infer unknown view angles from known view angles (known as view angle extension).

  14. A Knowledge-Based Expert System Using MFM Model for Operator Supporting

    International Nuclear Information System (INIS)

    Mo, Kun; Seong, Poong Hyun

    2005-01-01

    In this paper, a knowledge-based expert system using MFM (Multi-level Flow Modeling) is proposed for enhancing the operators' ability to cope with various situations in nuclear power plant. There are many complicated situations, in which regular and suitable operations should be done by operators accordingly. In order to help the operator to assess the situations promptly and accurately, and to regulate their operations according to these situations. it is necessary to develop an expert systems to help the operator for the fault diagnosis, alarm analysis, and operation results estimation for each operation. Many kinds of operator supporting systems focusing on different functions have been developed. Most of them used various methodologies for single diagnosis function or operation permission function. The proposed system integrated functions of fault diagnosis, alarm analysis and operation results estimation by the MFM basic algorithm for the operator supporting

  15. Knowledge base to develop expert system prototype for predicting groundwater pollution from nitrogen fertilizer

    International Nuclear Information System (INIS)

    Ta-oun, M.; Daud, M.; Bardaie, M.Z.; Jusop, S.

    1999-01-01

    An expert system for prediction the impact of nitrogen fertilizer on groundwater pollution potential was established by using CLIPS (NASA's Jonson Space Centre). The knowledge base could be extracted from FAO reports, ministry of agriculture and rural development Malaysia report, established literature and domain expert for preparing an expert system skeleton. An expert system was used to correlate the availability of nitrogen fertilizer with the vulnerability of groundwater to pollution in Peninsula Malaysia and to identify potential groundwater quality problems. An n-fertilizer groundwater pollution potential index produced b using the vulnerability of groundwater to pollution yields a more accurate screening toll for identifying potential pollution problems than by considering vulnerability alone. An expert system can predict the groundwater pollution potential under several conditions of agricultural activities and existing environments. (authors)

  16. Knowledge management method for knowledge based BWR Core Operation Management System

    Energy Technology Data Exchange (ETDEWEB)

    Wada, Yutaka; Fukuzaki, Takaharu; Kobayashi, Yasuhiro

    1989-03-01

    A knowledge management method is proposed to support an except whose knowledge is stored in a knowledge base in the BWR Core Operation Management System. When the alterations in the operation plans are motivated by the expert after evaluating them, the method attempts to find the knowledge which must be modified and to give the expert guidances. In this way the resultant operation plans are improved by modifying values of referenced data. Using data dependency among data, which are defined and referred during inference, data to be modified are retrieved. In generating modification guidances, data reference and definition procedures are classified by syntactic analysis of knowledge. The modified data values are calculated with a sensitivity between the increment in the data to be modified and the resultant one in the performance of operation plans. The efficiency of the knowledge management by the proposed method, when applied to the knowledge based system including 500 pieces of knowledge for BWR control rod programming, is higher than that for interactive use of existing general purpose editors. (author).

  17. Knowledge management method for knowledge based BWR Core Operation Management System

    International Nuclear Information System (INIS)

    Wada, Yutaka; Fukuzaki, Takaharu; Kobayashi, Yasuhiro

    1989-01-01

    A knowledge management method is proposed to support an except whose knowledge is stored in a knowledge base in the BWR Core Operation Management System. When the alterations in the operation plans are motivated by the expert after evaluating them, the method attempts to find the knowledge which must be modified and to give the expert guidances. In this way the resultant operation plans are improved by modifying values of referenced data. Using data dependency among data, which are defined and referred during inference, data to be modified are retrieved. In generating modification guidances, data reference and definition procedures are classified by syntactic analysis of knowledge. The modified data values are calculated with a sensitivity between the increment in the data to be modified and the resultant one in the performance of operation plans. The efficiency of the knowledge management by the proposed method, when applied to the knowledge based system including 500 pieces of knowledge for BWR control rod programming, is higher than that for interactive use of existing general purpose editors. (author)

  18. EEVADO-ontology based construction of a knowledge based system for handling radiation emergency

    International Nuclear Information System (INIS)

    Datta, D.; Hegde, A.G.

    2001-01-01

    The basic aim of handling a radiation emergency is to protect the site personnel and public in the off-site areas. Hence it is required to assess the accident to develop the protective action recommendations for the site personnel, members of the public and emergency workers. An explanation facility is required to analyze the emergency situation and make needful decision. Algorithmic based software cannot provide this support as it does not have any such facility. A knowledge based system (KBS) obviously would act as a special purpose intelligent agent on behalf or at the behest of the emergency organization. Knowledge of the KBS has been elicited on the basis of ontology, a set of definitions of classes, objects, attributes, relations and constraints. Ontology provides a vocabulary for the expression of domain knowledge. The present paper discusses the development and utility of a knowledge based system - EEVADO (Emergency Evaluation and Dosimetry). The present software is verified and validated by ontology and by conducting Desktop Exercise in training program on Emergency Preparedness. (author)

  19. An intelligent, knowledge-based multiple criteria decision making advisor for systems design

    Science.gov (United States)

    Li, Yongchang

    of an appropriate decision making method. Furthermore, some DMs may be exclusively using one or two specific methods which they are familiar with or trust and not realizing that they may be inappropriate to handle certain classes of the problems, thus yielding erroneous results. These issues reveal that in order to ensure a good decision a suitable decision method should be chosen before the decision making process proceeds. The first part of this dissertation proposes an MCDM process supported by an intelligent, knowledge-based advisor system referred to as Multi-Criteria Interactive Decision-Making Advisor and Synthesis process (MIDAS), which is able to facilitate the selection of the most appropriate decision making method and which provides insight to the user for fulfilling different preferences. The second part of this dissertation presents an autonomous decision making advisor which is capable of dealing with ever-evolving real time information and making autonomous decisions under uncertain conditions. The advisor encompasses a Markov Decision Process (MDP) formulation which takes uncertainty into account when determines the best action for each system state. (Abstract shortened by UMI.)

  20. Development the conceptual design of Knowledge Based System for Integrated Maintenance Strategy and Operation

    Science.gov (United States)

    Milana; Khan, M. K.; Munive, J. E.

    2014-07-01

    The importance of maintenance has escalated significantly by the increasing of automation in manufacturing process. This condition switches traditional maintenance perspective of inevitable cost into the business competitive driver. Consequently, maintenance strategy and operation decision needs to be synchronized to business and manufacturing concerns. This paper shows the development of conceptual design of Knowledge Based System for Integrated Maintenance Strategy and Operation (KBIMSO). The framework of KBIMSO is elaborated to show the process of how the KBIMSO works to reach the maintenance decision. By considering the multi-criteria of maintenance decision making, the KB system embedded with GAP and AHP to support integrated maintenance strategy and operation which is novel in this area. The KBIMSO is useful to review the existing maintenance system and give reasonable recommendation of maintenance decisions in respect to business and manufacturing perspective.

  1. KNOWLEDGE BASED ECONOMY VS. SUSTAINABLE AGRO-FOOD SYSTEMS; BEST PRACTICES

    Directory of Open Access Journals (Sweden)

    Carmen Beatrice PĂUNA

    2017-05-01

    Full Text Available Knowledge based economy, found in more than one fields, started – considering agriculture – from a transition premise towards sustainable agro-food systems. The conceptual boundaries between the two major paradigms on sustainable development of agriculture, namely the agro-industrial paradigm and the integrated territorial paradigm, is used nowadays for teaching and research purpose, as a comparison basis with an ideal case, mostly because we only have hybrid models which tend to coexist, always improving the food and goods production, also promoting innovative agro-food systems. This paper highlights the idea that the establishment of an institutional and legal framework, will have a catalytic role acting as an engine of economic growth and boosting the development of agricultural systems by mobilizing entrepreneurs in agriculture and related areas. In this regard, we present best practices of economic actors engaged in meta network of agriculture clusters.

  2. Development the conceptual design of Knowledge Based System for Integrated Maintenance Strategy and Operation

    International Nuclear Information System (INIS)

    Milana; Khan, M K; Munive, J E

    2014-01-01

    The importance of maintenance has escalated significantly by the increasing of automation in manufacturing process. This condition switches traditional maintenance perspective of inevitable cost into the business competitive driver. Consequently, maintenance strategy and operation decision needs to be synchronized to business and manufacturing concerns. This paper shows the development of conceptual design of Knowledge Based System for Integrated Maintenance Strategy and Operation (KBIMSO). The framework of KBIMSO is elaborated to show the process of how the KBIMSO works to reach the maintenance decision. By considering the multi-criteria of maintenance decision making, the KB system embedded with GAP and AHP to support integrated maintenance strategy and operation which is novel in this area. The KBIMSO is useful to review the existing maintenance system and give reasonable recommendation of maintenance decisions in respect to business and manufacturing perspective

  3. Management Information Systems Students' Perception of Skills and Competencies - Towards Knowledge Based Community

    Directory of Open Access Journals (Sweden)

    Alev ELÇİ

    2016-12-01

    Full Text Available The increasing usage of Information and Communication Technologies in official borders of our business lives, starting from e-government and e-commerce applications, spreading towards our daily personal lives has made it difficult to ignore the importance of Management Information Systems (MIS. MIS, initially taught as a course in different disciplines, has now started to develop as a standalone interdisciplinary academic program in higher education. Besides curriculum standards suggestions and necessary skills and competencies for MIS education identified by academic and professional organizations, students' perceptions in these topics are also important. Thus while developing towards knowledge based community, the aim of this research is to identify MIS students' perceptions of essential skills and competencies in their educational, proffesional and personal lives. The sample group of this study are the students that are a member of social media MIS groups. The gathered quantitative data has been analyzed by an online survey. As a result, it has been evident that students find that information technical skills and competencies are crucial. The skills required for transition to knowledge based community; global working, multicultural, social responsibility, civic awareness, equal opportunity, gender and environmental awareness comes later.

  4. A knowledge-based control system for air-scour optimisation in membrane bioreactors.

    Science.gov (United States)

    Ferrero, G; Monclús, H; Sancho, L; Garrido, J M; Comas, J; Rodríguez-Roda, I

    2011-01-01

    Although membrane bioreactors (MBRs) technology is still a growing sector, its progressive implementation all over the world, together with great technical achievements, has allowed it to reach a mature degree, just comparable to other more conventional wastewater treatment technologies. With current energy requirements around 0.6-1.1 kWh/m3 of treated wastewater and investment costs similar to conventional treatment plants, main market niche for MBRs can be areas with very high restrictive discharge limits, where treatment plants have to be compact or where water reuse is necessary. Operational costs are higher than for conventional treatments; consequently there is still a need and possibilities for energy saving and optimisation. This paper presents the development of a knowledge-based decision support system (DSS) for the integrated operation and remote control of the biological and physical (filtration and backwashing or relaxation) processes in MBRs. The core of the DSS is a knowledge-based control module for air-scour consumption automation and energy consumption minimisation.

  5. Study on the knowledge base system for the identification of typical target

    International Nuclear Information System (INIS)

    Qin Kai; Zhao Yingjun

    2008-01-01

    Based on the research on target knowledge base, target database, texture analysis, shape analysis, this paper proposed a new knowledge based method for typical target identification from remote sensing image. By extracting the texture characters and shape characters, joining with spatial analysis in GIS, reasoning according to the prior knowledge in the knowledge base, this method can identify and ex- tract typical target from remote sensing images. (authors)

  6. Development of a Knowledge Base for Enduser Consultation of AAL-Systems.

    Science.gov (United States)

    Röll, Natalie; Stork, Wilhelm; Rosales, Bruno; Stephan, René; Knaup, Petra

    2016-01-01

    Manufacturer information, user experiences and product availability of assistive living technologies are usually not known to citizens or consultation centers. The different knowledge levels concerning the availability of technology shows the need for building up a knowledge base. The aim of this contribution is the definition of requirements in the development of knowledge bases for AAL consultations. The major requirements, such as a maintainable and easy to use structure were implemented into a web based knowledge base, which went productive in ~3700 consulting interviews of municipal technology information centers. Within this field phase the implementation of the requirements for a knowledge base in the field of AAL consulting was evaluated and further developed.

  7. Planning and design of a knowledge based system for green manufacturing management

    Science.gov (United States)

    Kamal Mohd Nawawi, Mohd; Mohd Zuki Nik Mohamed, Nik; Shariff Adli Aminuddin, Adam

    2013-12-01

    This paper presents a conceptual design approach to the development of a hybrid Knowledge Based (KB) system for Green Manufacturing Management (GMM) at the planning and design stages. The research concentrates on the GMM by using a hybrid KB system, which is a blend of KB system and Gauging Absences of Pre-requisites (GAP). The hybrid KB/GAP system identifies all potentials elements of green manufacturing management issues throughout the development of this system. The KB system used in the planning and design stages analyses the gap between the existing and the benchmark organizations for an effective implementation through the GAP analysis technique. The proposed KBGMM model at the design stage explores two components, namely Competitive Priority and Lean Environment modules. Through the simulated results, the KBGMM System has identified, for each modules and sub-module, the problem categories in a prioritized manner. The System finalized all the Bad Points (BP) that need to be improved to achieve benchmark implementation of GMM at the design stage. The System provides valuable decision making information for the planning and design a GMM in term of business organization.

  8. Planning and design of a knowledge based system for green manufacturing management

    International Nuclear Information System (INIS)

    Nawawi, Mohd Kamal Mohd; Mohamed, Nik Mohd Zuki Nik; Aminuddin, Adam Shariff Adli

    2013-01-01

    This paper presents a conceptual design approach to the development of a hybrid Knowledge Based (KB) system for Green Manufacturing Management (GMM) at the planning and design stages. The research concentrates on the GMM by using a hybrid KB system, which is a blend of KB system and Gauging Absences of Pre-requisites (GAP). The hybrid KB/GAP system identifies all potentials elements of green manufacturing management issues throughout the development of this system. The KB system used in the planning and design stages analyses the gap between the existing and the benchmark organizations for an effective implementation through the GAP analysis technique. The proposed KBGMM model at the design stage explores two components, namely Competitive Priority and Lean Environment modules. Through the simulated results, the KBGMM System has identified, for each modules and sub-module, the problem categories in a prioritized manner. The System finalized all the Bad Points (BP) that need to be improved to achieve benchmark implementation of GMM at the design stage. The System provides valuable decision making information for the planning and design a GMM in term of business organization

  9. New frontiers in information and production systems modelling and analysis incentive mechanisms, competence management, knowledge-based production

    CERN Document Server

    Novikov, Dmitry; Bakhtadze, Natalia; Zaikin, Oleg

    2016-01-01

    This book demonstrates how to apply modern approaches to complex system control in practical applications involving knowledge-based systems. The dimensions of knowledge-based systems are extended by incorporating new perspectives from control theory, multimodal systems and simulation methods.  The book is divided into three parts: theory, production system and information system applications. One of its main focuses is on an agent-based approach to complex system analysis. Moreover, specialised forms of knowledge-based systems (like e-learning, social network, and production systems) are introduced with a new formal approach to knowledge system modelling.   The book, which offers a valuable resource for researchers engaged in complex system analysis, is the result of a unique cooperation between scientists from applied computer science (mainly from Poland) and leading system control theory researchers from the Russian Academy of Sciences’ Trapeznikov Institute of Control Sciences.

  10. Integrating design and production planning with knowledge-based inspection planning system

    International Nuclear Information System (INIS)

    Abbasi, Ghaleb Y.; Ketan, Hussein S.; Adil, Mazen B.

    2005-01-01

    In this paper an intelligent environment to integrate design and inspection earlier to the design stage. A hybrid knowledge-based approach integrating computer-aided design (CAD) and computer-aided inspection planning (CAIP) was developed, thereafter called computer-aided design and inspection planning (CADIP). CADIP was adopted for automated dimensional inspection planning. Critical functional features were screened based on certain attributes for part features for inspection planning application. Testing the model resulted in minimizing the number of probing vectors associated with the most important features in the inspected prismatic part, significant reduction in inspection costs and release of human labor. In totality, this tends to increase customer satisfaction as a final goal of the developed system. (author)

  11. Multi-agent system for Knowledge-based recommendation of Learning Objects

    Directory of Open Access Journals (Sweden)

    Paula Andrea RODRÍGUEZ MARÍN

    2015-12-01

    Full Text Available Learning Object (LO is a content unit being used within virtual learning environments, which -once found and retrieved- may assist students in the teaching - learning process. Such LO search and retrieval are recently supported and enhanced by data mining techniques. In this sense, clustering can be used to find groups holding similar LOs so that from obtained groups, knowledge-based recommender systems (KRS can recommend more adapted and relevant LOs. In particular, prior knowledge come from LOs previously selected, liked and ranked by the student to whom the recommendation will be performed. In this paper, we present a KRS for LOs, which uses a conventional clustering technique, namely K-means, aimed at finding similar LOs and delivering resources adapted to a specific student. Obtained promising results show that proposed KRS is able to both retrieve relevant LO and improve the recommendation precision.Learning Object (LO is a content unit being used within virtual learning environments, which -once found and retrieved- may assist students in the teaching - learning process. Such LO search and retrieval are recently supported and enhanced by data mining techniques. In this sense, clustering can be used to find groups holding similar LOs so that from obtained groups, knowledge-based recommender systems (KRS can recommend more adapted and relevant LOs. In particular, prior knowledge come from LOs previously selected, liked and ranked by the student to whom the recommendation will be performed. In this paper, we present a KRS for LOs, which uses a conventional clustering technique, namely K-means, aimed at finding similar LOs and delivering resources adapted to a specific student. Obtained promising results show that proposed KRS is able to both retrieve relevant LO and improve the recommendation precision.

  12. Knowledge-Based Personal Health System to empower outpatients of diabetes mellitus by means of P4 Medicine.

    Science.gov (United States)

    Bresó, Adrián; Sáez, Carlos; Vicente, Javier; Larrinaga, Félix; Robles, Montserrat; García-Gómez, Juan Miguel

    2015-01-01

    Diabetes Mellitus (DM) affects hundreds of millions of people worldwide and it imposes a large economic burden on healthcare systems. We present a web patient empowering system (PHSP4) that ensures continuous monitoring and assessment of the health state of patients with DM (type I and II). PHSP4 is a Knowledge-Based Personal Health System (PHS) which follows the trend of P4 Medicine (Personalized, Predictive, Preventive, and Participative). It provides messages to outpatients and clinicians about the achievement of objectives, follow-up, and treatments adjusted to the patient condition. Additionally, it calculates a four-component risk vector of the associated pathologies with DM: Nephropathy, Diabetic retinopathy, Diabetic foot, and Cardiovascular event. The core of the system is a Rule-Based System which Knowledge Base is composed by a set of rules implementing the recommendations of the American Diabetes Association (ADA) (American Diabetes Association: http://www.diabetes.org/ ) clinical guideline. The PHSP4 is designed to be standardized and to facilitate its interoperability by means of terminologies (SNOMED-CT [The International Health Terminology Standards Development Organization: http://www.ihtsdo.org/snomed-ct/ ] and UCUM [The Unified Code for Units of Measure: http://unitsofmeasure.org/ ]), standardized clinical documents (HL7 CDA R2 [Health Level Seven International: http://www.hl7.org/index.cfm ]) for managing Electronic Health Record (EHR). We have evaluated the functionality of the system and its users' acceptance of the system using simulated and real data, and a questionnaire based in the Technology Acceptance Model methodology (TAM). Finally results show the reliability of the system and the high acceptance of clinicians.

  13. Advanced piloted aircraft flight control system design methodology. Volume 1: Knowledge base

    Science.gov (United States)

    Mcruer, Duane T.; Myers, Thomas T.

    1988-01-01

    The development of a comprehensive and electric methodology for conceptual and preliminary design of flight control systems is presented and illustrated. The methodology is focused on the design stages starting with the layout of system requirements and ending when some viable competing system architectures (feedback control structures) are defined. The approach is centered on the human pilot and the aircraft as both the sources of, and the keys to the solution of, many flight control problems. The methodology relies heavily on computational procedures which are highly interactive with the design engineer. To maximize effectiveness, these techniques, as selected and modified to be used together in the methodology, form a cadre of computational tools specifically tailored for integrated flight control system preliminary design purposes. While theory and associated computational means are an important aspect of the design methodology, the lore, knowledge and experience elements, which guide and govern applications are critical features. This material is presented as summary tables, outlines, recipes, empirical data, lists, etc., which encapsulate a great deal of expert knowledge. Much of this is presented in topical knowledge summaries which are attached as Supplements. The composite of the supplements and the main body elements constitutes a first cut at a a Mark 1 Knowledge Base for manned-aircraft flight control.

  14. Automated knowledge acquisition for second generation knowledge base systems: A conceptual analysis and taxonomy

    Energy Technology Data Exchange (ETDEWEB)

    Williams, K.E.; Kotnour, T.

    1991-01-01

    In this paper, we present a conceptual analysis of knowledge-base development methodologies. The purpose of this research is to help overcome the high cost and lack of efficiency in developing knowledge base representations for artificial intelligence applications. To accomplish this purpose, we analyzed the available methodologies and developed a knowledge-base development methodology taxonomy. We review manual, machine-aided, and machine-learning methodologies. A set of developed characteristics allows description and comparison among the methodologies. We present the results of this conceptual analysis of methodologies and recommendations for development of more efficient and effective tools.

  15. Automated knowledge acquisition for second generation knowledge base systems: A conceptual analysis and taxonomy

    Energy Technology Data Exchange (ETDEWEB)

    Williams, K.E.; Kotnour, T.

    1991-12-31

    In this paper, we present a conceptual analysis of knowledge-base development methodologies. The purpose of this research is to help overcome the high cost and lack of efficiency in developing knowledge base representations for artificial intelligence applications. To accomplish this purpose, we analyzed the available methodologies and developed a knowledge-base development methodology taxonomy. We review manual, machine-aided, and machine-learning methodologies. A set of developed characteristics allows description and comparison among the methodologies. We present the results of this conceptual analysis of methodologies and recommendations for development of more efficient and effective tools.

  16. SAFE-KBS, Substantiating the safety of systems containing knowledge-based components

    International Nuclear Information System (INIS)

    Mesa, E.; Jimenez, A.

    1998-01-01

    The overall objective of the Safe-KBS project is to develop generic development and certification methodologies that allow the introduction of knowledge-based components in safety-related applications. The expert system technology presents a set of features, such as the capability to provide the rationale for its conclusions, that may significantly contribute to the new operation support systems. Nevertheless, the use of this technology in safety-related applications is limited by the lack of recognised methodologies and standards that allow a formal demonstration of the quality and reliability of these systems, as required for obtaining the approval for their use at nuclear power plants. The development methodology is structured in three hierarchical levels: life cycle model, i.e., processes and activities constituting the life cycle, life cycle plans, i.e., tasks, and support packages, i.e., set of techniques and methods to perform certain activities or tasks. The certification methodology consists of a set of certification requirements and a certification scheme for demonstrating the compliance with these requirements. This project was developed within the European framework ESPRIT, with the collaboration of Sextant, Cise, Qualience, Ilog, Computes, DNV and Uninfo. (Author)

  17. An approach to build a knowledge base for reactor accident diagnostic expert system

    International Nuclear Information System (INIS)

    Yoshida, K.; Fujii, M.; Fujiki, K.; Yokobayashi, M.; Kohsaka, A.; Aoyagi, T.; Hirota, Y.

    1987-01-01

    In the development of a rule based expert system, one of the key issues is how to acquire knowledge and to build knowledge base (KB). On building the KB of DISKET, which is an expert system for nuclear reactor accident diagnosis developed in JAERI, several problems have been experienced as follows. To write rules is a time consuming task, and it is difficult to keep the objectivity and consistency of rules as the number of rules increase. Further, certainty factors (CFs) must be often determined according to engineering judgment, i.e., empirically or intuitively. A systematic approach was attempted to handle these difficulties and to build an objective KB efficiently. The approach described in this paper is based on the concept that a prototype KB, colloquially speaking an initial guess, should first be generated in a systematic way and then is to be modified and/or improved by human experts for practical use. Statistical methods, principally Factor Analysis, were used as the systematic way to build a prototype KB for the DISKET using a PWR plant simulator data. The source information is a number of data obtained from the simulation of transients, such as the status of components and annunciator etc., and major process parameters like pressures, temperatures and so on

  18. STRUTEX: A prototype knowledge-based system for initially configuring a structure to support point loads in two dimensions

    Science.gov (United States)

    Rogers, James L.; Feyock, Stefan; Sobieszczanski-Sobieski, Jaroslaw

    1988-01-01

    The purpose of this research effort is to investigate the benefits that might be derived from applying artificial intelligence tools in the area of conceptual design. Therefore, the emphasis is on the artificial intelligence aspects of conceptual design rather than structural and optimization aspects. A prototype knowledge-based system, called STRUTEX, was developed to initially configure a structure to support point loads in two dimensions. This system combines numerical and symbolic processing by the computer with interactive problem solving aided by the vision of the user by integrating a knowledge base interface and inference engine, a data base interface, and graphics while keeping the knowledge base and data base files separate. The system writes a file which can be input into a structural synthesis system, which combines structural analysis and optimization.

  19. Fuel lattice design in a boiling water reactor using a knowledge-based automation system

    Energy Technology Data Exchange (ETDEWEB)

    Tung, Wu-Hsiung, E-mail: wstong@iner.gov.tw; Lee, Tien-Tso; Kuo, Weng-Sheng; Yaur, Shung-Jung

    2015-11-15

    Highlights: • An automation system was developed for the fuel lattice radial design of BWRs. • An enrichment group peaking equalizing method is applied to optimize the design. • Several heuristic rules and restrictions are incorporated to facilitate the design. • The CPU time for the system to design a 10x10 lattice was less than 1.2 h. • The beginning-of-life LPF was improved from 1.319 to 1.272 for one of the cases. - Abstract: A knowledge-based fuel lattice design automation system for BWRs is developed and applied to the design of 10 × 10 fuel lattices. The knowledge implemented in this fuel lattice design automation system includes the determination of gadolinium fuel pin location, the determination of fuel pin enrichment and enrichment distribution. The optimization process starts by determining the gadolinium distribution based on the pin power distribution of a flat enrichment lattice and some heuristic rules. Next, a pin power distribution flattening and an enrichment grouping process are introduced to determine the enrichment of each fuel pin enrichment type and the initial enrichment distribution of a fuel lattice design. Finally, enrichment group peaking equalizing processes are performed to achieve lower lattice peaking. Several fuel lattice design constraints are also incorporated in the automation system such that the system can accomplish a design which meets the requirements of practical use. Depending on the axial position of the lattice, a different method is applied in the design of the fuel lattice. Two typical fuel lattices with U{sup 235} enrichment of 4.471% and 4.386% were taken as references. Application of the method demonstrates that improved lattice designs can be achieved through the enrichment grouping and the enrichment group peaking equalizing method. It takes about 11 min and 1 h 11 min of CPU time for the automation system to accomplish two design cases on an HP-8000 workstation, including the execution of CASMO-4

  20. Fuel lattice design in a boiling water reactor using a knowledge-based automation system

    International Nuclear Information System (INIS)

    Tung, Wu-Hsiung; Lee, Tien-Tso; Kuo, Weng-Sheng; Yaur, Shung-Jung

    2015-01-01

    Highlights: • An automation system was developed for the fuel lattice radial design of BWRs. • An enrichment group peaking equalizing method is applied to optimize the design. • Several heuristic rules and restrictions are incorporated to facilitate the design. • The CPU time for the system to design a 10x10 lattice was less than 1.2 h. • The beginning-of-life LPF was improved from 1.319 to 1.272 for one of the cases. - Abstract: A knowledge-based fuel lattice design automation system for BWRs is developed and applied to the design of 10 × 10 fuel lattices. The knowledge implemented in this fuel lattice design automation system includes the determination of gadolinium fuel pin location, the determination of fuel pin enrichment and enrichment distribution. The optimization process starts by determining the gadolinium distribution based on the pin power distribution of a flat enrichment lattice and some heuristic rules. Next, a pin power distribution flattening and an enrichment grouping process are introduced to determine the enrichment of each fuel pin enrichment type and the initial enrichment distribution of a fuel lattice design. Finally, enrichment group peaking equalizing processes are performed to achieve lower lattice peaking. Several fuel lattice design constraints are also incorporated in the automation system such that the system can accomplish a design which meets the requirements of practical use. Depending on the axial position of the lattice, a different method is applied in the design of the fuel lattice. Two typical fuel lattices with U"2"3"5 enrichment of 4.471% and 4.386% were taken as references. Application of the method demonstrates that improved lattice designs can be achieved through the enrichment grouping and the enrichment group peaking equalizing method. It takes about 11 min and 1 h 11 min of CPU time for the automation system to accomplish two design cases on an HP-8000 workstation, including the execution of CASMO-4 lattice

  1. A Knowledge-Based Information Management System for Watershed Analysis in the Pacific Northwest U.S.

    Science.gov (United States)

    Keith Reynolds; Patrick Cunningham; Larry Bednar; Michael Saunders; Michael Foster; Richard Olson; Daniel Schmoldt; Donald Latham; Bruce Miller; John Steffenson

    1996-01-01

    The Pacific Northwest Research Station (USDA Forest Service) is developing a knowledge-based information management system to provide decision support for watershed analysis. The system includes: (1) a GIS interface that allows users to navigate graphically to specific provinces and watersheds and display a variety of themes (vegetation, streams, roads, topography, etc...

  2. Disease Compass- a navigation system for disease knowledge based on ontology and linked data techniques.

    Science.gov (United States)

    Kozaki, Kouji; Yamagata, Yuki; Mizoguchi, Riichiro; Imai, Takeshi; Ohe, Kazuhiko

    2017-06-19

    Medical ontologies are expected to contribute to the effective use of medical information resources that store considerable amount of data. In this study, we focused on disease ontology because the complicated mechanisms of diseases are related to concepts across various medical domains. The authors developed a River Flow Model (RFM) of diseases, which captures diseases as the causal chains of abnormal states. It represents causes of diseases, disease progression, and downstream consequences of diseases, which is compliant with the intuition of medical experts. In this paper, we discuss a fact repository for causal chains of disease based on the disease ontology. It could be a valuable knowledge base for advanced medical information systems. We developed the fact repository for causal chains of diseases based on our disease ontology and abnormality ontology. This section summarizes these two ontologies. It is developed as linked data so that information scientists can access it using SPARQL queries through an Resource Description Framework (RDF) model for causal chain of diseases. We designed the RDF model as an implementation of the RFM for the fact repository based on the ontological definitions of the RFM. 1554 diseases and 7080 abnormal states in six major clinical areas, which are extracted from the disease ontology, are published as linked data (RDF) with SPARQL endpoint (accessible API). Furthermore, the authors developed Disease Compass, a navigation system for disease knowledge. Disease Compass can browse the causal chains of a disease and obtain related information, including abnormal states, through two web services that provide general information from linked data, such as DBpedia, and 3D anatomical images. Disease Compass can provide a complete picture of disease-associated processes in such a way that fits with a clinician's understanding of diseases. Therefore, it supports user exploration of disease knowledge with access to pertinent information

  3. Sensitivity analysis of land unit suitability for conservation using a knowledge-based system.

    Science.gov (United States)

    Humphries, Hope C; Bourgeron, Patrick S; Reynolds, Keith M

    2010-08-01

    The availability of spatially continuous data layers can have a strong impact on selection of land units for conservation purposes. The suitability of ecological conditions for sustaining the targets of conservation is an important consideration in evaluating candidate conservation sites. We constructed two fuzzy logic-based knowledge bases to determine the conservation suitability of land units in the interior Columbia River basin using NetWeaver software in the Ecosystem Management Decision Support application framework. Our objective was to assess the sensitivity of suitability ratings, derived from evaluating the knowledge bases, to fuzzy logic function parameters and to the removal of data layers (land use condition, road density, disturbance regime change index, vegetation change index, land unit size, cover type size, and cover type change index). The amount and geographic distribution of suitable land polygons was most strongly altered by the removal of land use condition, road density, and land polygon size. Removal of land use condition changed suitability primarily on private or intensively-used public land. Removal of either road density or land polygon size most strongly affected suitability on higher-elevation US Forest Service land containing small-area biophysical environments. Data layers with the greatest influence differed in rank between the two knowledge bases. Our results reinforce the importance of including both biophysical and socio-economic attributes to determine the suitability of land units for conservation. The sensitivity tests provided information about knowledge base structuring and parameterization as well as prioritization for future data needs.

  4. Knowledge-based systems and interactive graphics for reactor control using the Automated Reasoning Tool(ART) system

    International Nuclear Information System (INIS)

    Ragheb, M.; Clayton, B.; Davies, P.

    1987-01-01

    The use of Knowledge-Based systems and advanced graphic concepts are described using the Automated Reasoning Tool (ART) for a model nuclear plant system. Through the sue of asynchronous graphic input/output, the user is allowed to communicate through a graphical display to a Production-Rule Analysis System modelling the plant while its rules are actively being fired. The user changes the status of system components by pointing at them on the system configuration display with a mouse cursor and clicking one of the buttons on the mouse. The Production-Rule Analysis System accepts the new input and immediately displays its diagnosis of the system state and any associated recommendations as to the appropriate course of action. This approach offers a distinct advantage over typing the components statuses in response to queries by a conventional Production-Rule Analysis system. Moreover, two effective ways of communication between man and machine are combined

  5. Intelligent personal navigator supported by knowledge-based systems for estimating dead reckoning navigation parameters

    Science.gov (United States)

    Moafipoor, Shahram

    Personal navigators (PN) have been studied for about a decade in different fields and applications, such as safety and rescue operations, security and emergency services, and police and military applications. The common goal of all these applications is to provide precise and reliable position, velocity, and heading information of each individual in various environments. In the PN system developed in this dissertation, the underlying assumption is that the system does not require pre-existing infrastructure to enable pedestrian navigation. To facilitate this capability, a multisensor system concept, based on the Global Positioning System (GPS), inertial navigation, barometer, magnetometer, and a human pedometry model has been developed. An important aspect of this design is to use the human body as navigation sensor to facilitate Dead Reckoning (DR) navigation in GPS-challenged environments. The system is designed predominantly for outdoor environments, where occasional loss of GPS lock may happen; however, testing and performance demonstration have been extended to indoor environments. DR navigation is based on a relative-measurement approach, with the key idea of integrating the incremental motion information in the form of step direction (SD) and step length (SL) over time. The foundation of the intelligent navigation system concept proposed here rests in exploiting the human locomotion pattern, as well as change of locomotion in varying environments. In this context, the term intelligent navigation represents the transition from the conventional point-to-point DR to dynamic navigation using the knowledge about the mechanism of the moving person. This approach increasingly relies on integrating knowledge-based systems (KBS) and artificial intelligence (AI) methodologies, including artificial neural networks (ANN) and fuzzy logic (FL). In addition, a general framework of the quality control for the real-time validation of the DR processing is proposed, based on a

  6. A knowledge based expert system for propellant system monitoring at the Kennedy Space Center

    Science.gov (United States)

    Jamieson, J. R.; Delaune, C.; Scarl, E.

    1985-01-01

    The Lox Expert System (LES) is the first attempt to build a realtime expert system capable of simulating the thought processes of NASA system engineers, with regard to fluids systems analysis and troubleshooting. An overview of the hardware and software describes the techniques used, and possible applications to other process control systems. LES is now in the advanced development stage, with a full implementation planned for late 1985.

  7. A knowledge-based system for monitoring the electrical power system of the Hubble Space Telescope

    Science.gov (United States)

    Eddy, Pat

    1987-01-01

    The design and the prototype for the expert system for the Hubble Space Telescope's electrical power system are discussed. This prototype demonstrated the capability to use real time data from a 32k telemetry stream and to perform operational health and safety status monitoring, detect trends such as battery degradation, and detect anomalies such as solar array failures. This prototype, along with the pointing control system and data management system expert systems, forms the initial Telemetry Analysis for Lockheed Operated Spacecraft (TALOS) capability.

  8. Development of knowledge-based operator support system for steam generator water leak events in FBR plants

    International Nuclear Information System (INIS)

    Arikawa, Hiroshi; Ida, Toshio; Matsumoto, Hiroyuki; Kishida, Masako

    1991-01-01

    A knowledge engineering approach to operation support system would be useful in maintaining safe and steady operation in nuclear plants. This paper describes a knowledge-based operation support system which assists the operators during steam generator water leak events in FBR plants. We have developed a real-time expert system. The expert system adopts hierarchical knowledge representation corresponding to the 'plant abnormality model'. A technique of signal validation which uses knowledge of symptom propagation are applied to diagnosis. In order to verify the knowledge base concerning steam generator water leak events in FBR plants, a simulator is linked to the expert system. It is revealed that diagnosis based on 'plant abnormality model' and signal validation using knowledge of symptom propagation could work successfully. Also, it is suggested that the expert system could be useful in supporting FBR plants operations. (author)

  9. Knowledge-based treatment planning and its potential role in the transition between treatment planning systems.

    Science.gov (United States)

    Masi, Kathryn; Archer, Paul; Jackson, William; Sun, Yilun; Schipper, Matthew; Hamstra, Daniel; Matuszak, Martha

    2017-11-22

    Commissioning a new treatment planning system (TPS) involves many time-consuming tasks. We investigated the role that knowledge-based planning (KBP) can play in aiding a clinic's transition to a new TPS. Sixty clinically treated prostate/prostate bed intensity-modulated radiation therapy (IMRT) plans were exported from an in-house TPS and were used to create a KBP model in a newly implemented commercial application. To determine the benefit that KBP may have in a TPS transition, the model was tested on 2 groups of patients. Group 1 consisted of the first 10 prostate/prostate bed patients treated in the commercial TPS after the transition from the in-house TPS. Group 2 consisted of 10 patients planned in the commercial TPS after 8 months of clinical use. The KBP-generated plan was compared with the clinically used plan in terms of plan quality (ability to meet planning objectives and overall dose metrics) and planning efficiency (time required to generate clinically acceptable plans). The KBP-generated plans provided a significantly improved target coverage (p = 0.01) compared with the clinically used plans for Group 1, but yielded plans of comparable target coverage to the clinically used plans for Group 2. For the organs at risk, the KBP-generated plans produced lower doses, on average, for every normal-tissue objective except for the maximum dose to 0.1 cc of rectum. The time needed for the KBP-generated plans ranged from 6 to 15 minutes compared to 30 to 150 and 15 to 60 minutes for manual planning in Groups 1 and 2, respectively. KBP is a promising tool to aid in the transition to a new TPS. Our study indicates that high-quality treatment plans could have been generated in the newly implemented TPS more efficiently compared with not using KBP. Even after 8 months of the clinical use, KBP still showed an increase in plan quality and planning efficiency compared with manual planning. Copyright © 2017 American Association of Medical Dosimetrists. Published

  10. Knowledge-based system for the detection and classification of unplanned human settlements

    CSIR Research Space (South Africa)

    Parbhoo, C

    2007-03-01

    Full Text Available interpretations of geospatial concepts, heterogeneity of data formats and systems as well as a reluctance to share data, amongst others. However, SDI is about communication and sharing of spatial data and information, which has largely been addressed by recent...

  11. Application of Knowledge Based Systems in a B-to-B environment

    DEFF Research Database (Denmark)

    Malis, Martin; Svensson, Carsten; Hvam, Lars

    2002-01-01

    has changed the daily interaction between a company and its suppliers. Large multinational companies (e.g. Dell and Cisco) have demonstrated how the use of web-based expert systems can revolutionize the sale of customized products and change market paradigms. The companies have reached new levels...

  12. An intelligent knowledge-based and customizable home care system framework with ubiquitous patient monitoring and alerting techniques.

    Science.gov (United States)

    Chen, Yen-Lin; Chiang, Hsin-Han; Yu, Chao-Wei; Chiang, Chuan-Yen; Liu, Chuan-Ming; Wang, Jenq-Haur

    2012-01-01

    This study develops and integrates an efficient knowledge-based system and a component-based framework to design an intelligent and flexible home health care system. The proposed knowledge-based system integrates an efficient rule-based reasoning model and flexible knowledge rules for determining efficiently and rapidly the necessary physiological and medication treatment procedures based on software modules, video camera sensors, communication devices, and physiological sensor information. This knowledge-based system offers high flexibility for improving and extending the system further to meet the monitoring demands of new patient and caregiver health care by updating the knowledge rules in the inference mechanism. All of the proposed functional components in this study are reusable, configurable, and extensible for system developers. Based on the experimental results, the proposed intelligent homecare system demonstrates that it can accomplish the extensible, customizable, and configurable demands of the ubiquitous healthcare systems to meet the different demands of patients and caregivers under various rehabilitation and nursing conditions.

  13. An Intelligent Knowledge-Based and Customizable Home Care System Framework with Ubiquitous Patient Monitoring and Alerting Techniques

    Directory of Open Access Journals (Sweden)

    Yen-Lin Chen

    2012-08-01

    Full Text Available This study develops and integrates an efficient knowledge-based system and a component-based framework to design an intelligent and flexible home health care system. The proposed knowledge-based system integrates an efficient rule-based reasoning model and flexible knowledge rules for determining efficiently and rapidly the necessary physiological and medication treatment procedures based on software modules, video camera sensors, communication devices, and physiological sensor information. This knowledge-based system offers high flexibility for improving and extending the system further to meet the monitoring demands of new patient and caregiver health care by updating the knowledge rules in the inference mechanism. All of the proposed functional components in this study are reusable, configurable, and extensible for system developers. Based on the experimental results, the proposed intelligent homecare system demonstrates that it can accomplish the extensible, customizable, and configurable demands of the ubiquitous healthcare systems to meet the different demands of patients and caregivers under various rehabilitation and nursing conditions.

  14. Knowledge-based geographic information systems (KBGIS): New analytic and data management tools

    Science.gov (United States)

    Albert, T.M.

    1988-01-01

    In its simplest form, a geographic information system (GIS) may be viewed as a data base management system in which most of the data are spatially indexed, and upon which sets of procedures operate to answer queries about spatial entities represented in the data base. Utilization of artificial intelligence (AI) techniques can enhance greatly the capabilities of a GIS, particularly in handling very large, diverse data bases involved in the earth sciences. A KBGIS has been developed by the U.S. Geological Survey which incorporates AI techniques such as learning, expert systems, new data representation, and more. The system, which will be developed further and applied, is a prototype of the next generation of GIS's, an intelligent GIS, as well as an example of a general-purpose intelligent data handling system. The paper provides a description of KBGIS and its application, as well as the AI techniques involved. ?? 1988 International Association for Mathematical Geology.

  15. An engineering approach to knowledge-based systems, the alarm processing and diagnostic system

    International Nuclear Information System (INIS)

    Mah, E.; Damon, L.

    1992-01-01

    The number of alarms that may be initiated during transients or accidents in nuclear-generating control rooms may temporarily exceed an operator's ability to assimilate and respond. This phenomenon is characterized as Cognitive Overload. The Alarm Processing and Diagnostic System (APDS) was designed to deal with this problem through a unique and operationally sensitive method of alarm prioritization and filtration. The approach taken attempts to parallel the operator's situation assessment methodology when dealing with transient conditions. A strong criteria for the development methodology employed was its ultimate acceptance by parties engaged in the operation of nuclear power facilities. As such, the methodology used had to be easily understood and consistent with the acceptance standards of nuclear power. This necessitated the verifiable practices found in engineering design. While APDS remains rooted in artificial intelligence or expert systems, it goes beyond the paradigm of rules and inferencing to an object-oriented structure that allows traditional and well-documented engineering-based decision methods to be applied. These features have important consequences when considering final acceptance, implementation, and maintenance. 3 refs., 1 tab

  16. Development of knowledge base of intellectual system for support of formal and informal training of IT staff

    Science.gov (United States)

    Kurvaeva, L. V.; Gavrilova, I. V.; Mahmutova, M. V.; Chichilanova, S. A.; Povituhin, S. A.

    2018-05-01

    The choice of educational digital content, according to education goals (descriptors which are formed by competences, labor functions, etc.), becomes an important practical task because of the variety of existing educational online systems that is available to persons within formal, informal IT education formats. Ontologies can form a basis for working out knowledge bases, which are center of intellectual system support in IT specialist training. The paper describes a technology of ontological model creation; analyzes the structure and the content of basic data. The structure of knowledge interrelation of the considered subject and IT education is considered. This knowledge base is applied for solving tasks of educational and methodical supplementation of educational programs of the higher and additional professional education, corporate training; for creating systems of certification and testing for students and practicing experts; for forming individual trajectories of training and career development.

  17. The use of knowledge-based systems in medicine in developing countries: a luxury or a necessity?

    Science.gov (United States)

    Tolmie, C J; du Plessis, J P

    1997-02-01

    Knowledge-based systems (KBSs) in medicine have received much attention over the past two decades, mainly because of the potential benefits that can be gained from using them. They may facilitate in increasing productivity in a medical environment, support the making of diagnoses and other types of medical decisions, assist in the training of medical professionals, and can even handle some routine tasks in a medical environment. However, some critical problems in this field have also been identified. For example, research indicated that some problems can be solved partially, but not completely, with existing artificial intelligence techniques. Another problem is that many of the existing medical information systems do not support the integration of KBSs in a natural way. Furthermore, the routine use of a medical KBS is complicated by legal issues. These and other problems contribute to what we experience today: a large proportion of the medical KB applications that are developed is never actually used in practice. This justifies questions such as: Should developing countries, having limited infrastructure and research resources, invest in medical KBSs research and development, or should this field be regarded as a luxury that only belongs to developed countries?, and: Can developing countries really benefit from the use of these systems? These questions are discussed in this paper. We highlight the main problems surrounding the development and use of medical KBSs. With the focus on developing countries we discuss potential benefits that could be obtained by investing in these systems and we offer guidelines for focusing research and development of medical KBSs.

  18. A prototype knowledge-based system for material selection of ceramic matrix composites of automotive engine components

    Energy Technology Data Exchange (ETDEWEB)

    Sapuan, S.M.; Jacob, M.S.D.; Mustapha, F.; Ismail, N

    2002-12-15

    A prototype knowledge based system (KBS) for material selection of ceramic matrix composites (CMC) for engine components such as piston, connecting rod and piston ring is proposed in this paper. The main aim of this research work is to select the most suitable material for the automotive engine components. The selection criteria are based upon the pre-defined constraint value. The constraint values are mechanical, physical properties and manufacturing techniques. The constraint values are the safety values for the product design. The constraint values are selected from the product design specification. The product design specification values are selected from the past design calculation and some values are calculated by the help of past design data. The knowledge-based system consists of several modules such as knowledge acquisition module, inference module and user interface module. The domains of the knowledge-based system are defined as objects and linked together by hierarchical graph. The system is capable of selecting the most suitable materials and ranks the materials with respect to their properties. The design engineers can choose the required materials related to the materials property.

  19. Knowledge base technology for CT-DIMS: Report 1. [CT-DIMS (Cutting Tool - Database and Information Management System)

    Energy Technology Data Exchange (ETDEWEB)

    Kelley, E.E.

    1993-05-01

    This report discusses progress on the Cutting Tool-Database and Information Management System (CT-DIMS) project being conducted by the University of Illinois Urbana-Champaign (UIUC) under contract to the Department of Energy. This project was initiated in October 1991 by UIUC. The Knowledge-Based Engineering Systems Research Laboratory (KBESRL) at UIUC is developing knowledge base technology and prototype software for the presentation and manipulation of the cutting tool databases at Allied-Signal Inc., Kansas City Division (KCD). The graphical tool selection capability being developed for CT-DIMS in the Intelligent Design Environment for Engineering Automation (IDEEA) will provide a concurrent environment for simultaneous access to tool databases, tool standard libraries, and cutting tool knowledge.

  20. Knowledge base verification based on enhanced colored petri net

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jong Hyun; Seong, Poong Hyun [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

    1997-12-31

    Verification is a process aimed at demonstrating whether a system meets it`s specified requirements. As expert systems are used in various applications, the knowledge base verification of systems takes an important position. The conventional Petri net approach that has been studied recently in order to verify the knowledge base is found that it is inadequate to verify the knowledge base of large and complex system, such as alarm processing system of nuclear power plant. Thus, we propose an improved method that models the knowledge base as enhanced colored Petri net. In this study, we analyze the reachability and the error characteristics of the knowledge base and apply the method to verification of simple knowledge base. 8 refs., 4 figs. (Author)

  1. Knowledge base verification based on enhanced colored petri net

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jong Hyun; Seong, Poong Hyun [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

    1998-12-31

    Verification is a process aimed at demonstrating whether a system meets it`s specified requirements. As expert systems are used in various applications, the knowledge base verification of systems takes an important position. The conventional Petri net approach that has been studied recently in order to verify the knowledge base is found that it is inadequate to verify the knowledge base of large and complex system, such as alarm processing system of nuclear power plant. Thus, we propose an improved method that models the knowledge base as enhanced colored Petri net. In this study, we analyze the reachability and the error characteristics of the knowledge base and apply the method to verification of simple knowledge base. 8 refs., 4 figs. (Author)

  2. System for inspection and quality assurance of software - A knowledge-based experiment with code understanding

    International Nuclear Information System (INIS)

    Das, B.K.

    1989-01-01

    This paper describes a knowledge-based prototype that inspects and quality-assures software components. The prototype model, which offers a singular representation of these components, is used to automate both the mechanical and nonmechanical activities in the quality assurance (QA) process. It is shown that the prototype, in addition to automating the QA process, provides a novel approach to understanding code. These approaches are compared with recent approaches to code understanding. The paper also presents the results of an experiment with several classes of nonsyntactic bugs. It is argued that a structured environment, as facilitated by this unique architecture, along with software development standards used in the QA process, is essential for meaningful analysis of code. 8 refs

  3. Knowledge Base for an Intelligent System in order to Identify Security Requirements for Government Agencies Software Projects

    Directory of Open Access Journals (Sweden)

    Adán Beltrán G.

    2016-01-01

    Full Text Available It has been evidenced that one of the most common causes in the failure of software security is the lack of identification and specification of requirements for information security, it is an activity with an insufficient importance in the software development or software acquisition We propose the knowledge base of CIBERREQ. CIBERREQ is an intelligent knowledge-based system used for the identification and specification of security requirements in the software development cycle or in the software acquisition. CIBERREQ receives functional software requirements written in natural language and produces non-functional security requirements through a semi-automatic process of risk management. The knowledge base built is formed by an ontology developed collaboratively by experts in information security. In this process has been identified six types of assets: electronic data, physical data, hardware, software, person and service; as well as six types of risk: competitive disadvantage, loss of credibility, economic risks, strategic risks, operational risks and legal sanctions. In addition there are defined 95 vulnerabilities, 24 threats, 230 controls, and 515 associations between concepts. Additionally, automatic expansion was used with Wikipedia for the asset types Software and Hardware, obtaining 7125 and 5894 software and hardware subtypes respectively, achieving thereby an improvement of 10% in the identification of the information assets candidates, one of the most important phases of the proposed system.

  4. Knowledge-based personalized search engine for the Web-based Human Musculoskeletal System Resources (HMSR) in biomechanics.

    Science.gov (United States)

    Dao, Tien Tuan; Hoang, Tuan Nha; Ta, Xuan Hien; Tho, Marie Christine Ho Ba

    2013-02-01

    Human musculoskeletal system resources of the human body are valuable for the learning and medical purposes. Internet-based information from conventional search engines such as Google or Yahoo cannot response to the need of useful, accurate, reliable and good-quality human musculoskeletal resources related to medical processes, pathological knowledge and practical expertise. In this present work, an advanced knowledge-based personalized search engine was developed. Our search engine was based on a client-server multi-layer multi-agent architecture and the principle of semantic web services to acquire dynamically accurate and reliable HMSR information by a semantic processing and visualization approach. A security-enhanced mechanism was applied to protect the medical information. A multi-agent crawler was implemented to develop a content-based database of HMSR information. A new semantic-based PageRank score with related mathematical formulas were also defined and implemented. As the results, semantic web service descriptions were presented in OWL, WSDL and OWL-S formats. Operational scenarios with related web-based interfaces for personal computers and mobile devices were presented and analyzed. Functional comparison between our knowledge-based search engine, a conventional search engine and a semantic search engine showed the originality and the robustness of our knowledge-based personalized search engine. In fact, our knowledge-based personalized search engine allows different users such as orthopedic patient and experts or healthcare system managers or medical students to access remotely into useful, accurate, reliable and good-quality HMSR information for their learning and medical purposes. Copyright © 2012 Elsevier Inc. All rights reserved.

  5. Integrating a Genetic Algorithm Into a Knowledge-Based System for Ordering Complex Design Processes

    Science.gov (United States)

    Rogers, James L.; McCulley, Collin M.; Bloebaum, Christina L.

    1996-01-01

    The design cycle associated with large engineering systems requires an initial decomposition of the complex system into design processes which are coupled through the transference of output data. Some of these design processes may be grouped into iterative subcycles. In analyzing or optimizing such a coupled system, it is essential to be able to determine the best ordering of the processes within these subcycles to reduce design cycle time and cost. Many decomposition approaches assume the capability is available to determine what design processes and couplings exist and what order of execution will be imposed during the design cycle. Unfortunately, this is often a complex problem and beyond the capabilities of a human design manager. A new feature, a genetic algorithm, has been added to DeMAID (Design Manager's Aid for Intelligent Decomposition) to allow the design manager to rapidly examine many different combinations of ordering processes in an iterative subcycle and to optimize the ordering based on cost, time, and iteration requirements. Two sample test cases are presented to show the effects of optimizing the ordering with a genetic algorithm.

  6. A Knowledge-Based System For Analysis, Intervention Planning and Prevention of Defects in Immovable Cultural Heritage Objects and Monuments

    Science.gov (United States)

    Valach, J.; Cacciotti, R.; Kuneš, P.; ČerÅanský, M.; Bláha, J.

    2012-04-01

    The paper presents a project aiming to develop a knowledge-based system for documentation and analysis of defects of cultural heritage objects and monuments. The MONDIS information system concentrates knowledge on damage of immovable structures due to various causes, and preventive/remedial actions performed to protect/repair them, where possible. The currently built system is to provide for understanding of causal relationships between a defect, materials, external load, and environment of built object. Foundation for the knowledge-based system will be the systemized and formalized knowledge on defects and their mitigation acquired in the process of analysis of a representative set of cases documented in the past. On the basis of design comparability, used technologies, materials and the nature of the external forces and surroundings, the developed software system has the capacity to indicate the most likely risks of new defect occurrence or the extension of the existing ones. The system will also allow for a comparison of the actual failure with similar cases documented and will propose a suitable technical intervention plan. The system will provide conservationists, administrators and owners of historical objects with a toolkit for defect documentation for their objects. Also, advanced artificial intelligence methods will offer accumulated knowledge to users and will also enable them to get oriented in relevant techniques of preventive interventions and reconstructions based on similarity with their case.

  7. Knowledge-based machine indexing from natural language text: Knowledge base design, development, and maintenance

    Science.gov (United States)

    Genuardi, Michael T.

    1993-01-01

    One strategy for machine-aided indexing (MAI) is to provide a concept-level analysis of the textual elements of documents or document abstracts. In such systems, natural-language phrases are analyzed in order to identify and classify concepts related to a particular subject domain. The overall performance of these MAI systems is largely dependent on the quality and comprehensiveness of their knowledge bases. These knowledge bases function to (1) define the relations between a controlled indexing vocabulary and natural language expressions; (2) provide a simple mechanism for disambiguation and the determination of relevancy; and (3) allow the extension of concept-hierarchical structure to all elements of the knowledge file. After a brief description of the NASA Machine-Aided Indexing system, concerns related to the development and maintenance of MAI knowledge bases are discussed. Particular emphasis is given to statistically-based text analysis tools designed to aid the knowledge base developer. One such tool, the Knowledge Base Building (KBB) program, presents the domain expert with a well-filtered list of synonyms and conceptually-related phrases for each thesaurus concept. Another tool, the Knowledge Base Maintenance (KBM) program, functions to identify areas of the knowledge base affected by changes in the conceptual domain (for example, the addition of a new thesaurus term). An alternate use of the KBM as an aid in thesaurus construction is also discussed.

  8. Knowledge bases for modelisation of industrial plants

    International Nuclear Information System (INIS)

    Lorre, J.P.; Evrard, J.M.; Dorlet, E.

    1992-01-01

    Our experience in the development of numerous knowledge based control systems for large industrial applications has led us to the expression of a generic problem and to the implementation of the tools to address it. This paper illustrates, with different practical examples that we have encountered, the principal concepts found in the modelling and management of large industrial knowledge bases. We thus arrive at the definition of the formalism to be used. The principles described are now integrated into the tool SPIRAL and are currently being employed in the development of several applications

  9. Data acquisition for a real time fault monitoring and diagnosis knowledge-based system for space power system

    Science.gov (United States)

    Wilhite, Larry D.; Lee, S. C.; Lollar, Louis F.

    1989-01-01

    The design and implementation of the real-time data acquisition and processing system employed in the AMPERES project is described, including effective data structures for efficient storage and flexible manipulation of the data by the knowledge-based system (KBS), the interprocess communication mechanism required between the data acquisition system and the KBS, and the appropriate data acquisition protocols for collecting data from the sensors. Sensor data are categorized as critical or noncritical data on the basis of the inherent frequencies of the signals and the diagnostic requirements reflected in their values. The critical data set contains 30 analog values and 42 digital values and is collected every 10 ms. The noncritical data set contains 240 analog values and is collected every second. The collected critical and noncritical data are stored in separate circular buffers. Buffers are created in shared memory to enable other processes, i.e., the fault monitoring and diagnosis process and the user interface process, to freely access the data sets.

  10. Matrix Failure Modes and Effects Analysis as a Knowledge Base for a Real Time Automated Diagnosis Expert System

    Science.gov (United States)

    Herrin, Stephanie; Iverson, David; Spukovska, Lilly; Souza, Kenneth A. (Technical Monitor)

    1994-01-01

    Failure Modes and Effects Analysis contain a wealth of information that can be used to create the knowledge base required for building automated diagnostic Expert systems. A real time monitoring and diagnosis expert system based on an actual NASA project's matrix failure modes and effects analysis was developed. This Expert system Was developed at NASA Ames Research Center. This system was first used as a case study to monitor the Research Animal Holding Facility (RAHF), a Space Shuttle payload that is used to house and monitor animals in orbit so the effects of space flight and microgravity can be studied. The techniques developed for the RAHF monitoring and diagnosis Expert system are general enough to be used for monitoring and diagnosis of a variety of other systems that undergo a Matrix FMEA. This automated diagnosis system was successfully used on-line and validated on the Space Shuttle flight STS-58, mission SLS-2 in October 1993.

  11. Evaluation of an automated knowledge based treatment planning system for head and neck

    International Nuclear Information System (INIS)

    Krayenbuehl, Jerome; Norton, Ian; Studer, Gabriela; Guckenberger, Matthias

    2015-01-01

    This study evaluated an automated inverse treatment planning algorithm, Pinnacle Auto-Planning (AP), and compared automatically generated plans with historical plans in a large cohort of head and neck cancer patients. Fifty consecutive patients treated with volumetric modulated arc therapy (Eclipse, Varian Medical System, Palo Alto, CA) for head and neck were re-planned with AP version 9.10. Only one single cycle of plan optimization using one single template was allowed for AP. The dose to the planning target volumes (PTV’s; 3–4 dose levels), the organs at risk (OAR’s) and the effective working time for planning was evaluated. Additionally, two experienced radiation oncologists blind-reviewed and ranked 10 plans. Dose coverage and dose homogeneity of the PTV were significantly improved with AP, however manually optimized plans showed significantly improved dose conformity. The mean dose to the parotid glands, oral mucosa, swallowing muscles, dorsal neck tissue and maximal dose to the spinal cord were significantly reduced with AP. In 64 % of the plans, the mean dose to any OAR (spinal cord excluded) was reduced by >20 % with AP in comparison to the manually optimized plans. In 12 % of the plans, the manually optimized plans showed reduced doses by >20 % in at least one OAR. The experienced radiation oncologists preferred the AP plan and the clinical plan in 80 and 20 % of the cases, respectively. The average effective working time was 3.8 min ± 1.1 min in comparison to 48.5 min ± 6.0 min using AP compared to the manually optimized plans, respectively. The evaluated automated planning algorithm achieved highly consistent and significantly improved treatment plans with potentially clinically relevant OAR sparing by >20 % in 64 % of the cases. The effective working time was substantially reduced with Auto-Planning

  12. Integrating knowledge-based systems into operations at the McMaster University FN tandem accelerator laboratory

    International Nuclear Information System (INIS)

    Poehlman, W.F.S.; Stark, J.W.

    1989-01-01

    The introduction of computer-based expertise in accelerator operations has resulted in the development of an Accelerator Operators' Companion which incorporates a knowledge-based front-end that is tuned to user operational expertise. The front-end also provides connections to traditional software packages such as database and spreadsheet programs. During work on the back-end, that is, real-time expert system control development, the knowledge engineering phase has revealed the importance of modifying expert procedures when a multitasking environment is involved

  13. A computer-aided collection and construction system of terminology based on a statistically built knowledge base

    International Nuclear Information System (INIS)

    Konishi, O.; Miyahara, A.

    1988-04-01

    Since a terminology is a system of concepts to which terms should be assigned, automatic processings of such concepts seem to be difficult to be realized. In this paper, we propose a computer-aided collection and construction system of terminology which creates automatically a knowledge base using the technical terms and their frequency of appearance information extracted from a bibliographic database and selects the terminologies based on the knowledge base. The experts in specialized fields can be offered a set of candidates for the technical terms with the system and determined needed terminologies through the following important procedures: 1) the relations among important concepts in a specified field can be extracted; 2) the concepts in the lower classes can be searched by specifying those in the upper classes; 3) the important terms can be distinguished from the basic terms and then the most important terms can be selected. An application of the present system to nuclear fusion research is described in detail. (author)

  14. Automated knowledge base development from CAD/CAE databases

    Science.gov (United States)

    Wright, R. Glenn; Blanchard, Mary

    1988-01-01

    Knowledge base development requires a substantial investment in time, money, and resources in order to capture the knowledge and information necessary for anything other than trivial applications. This paper addresses a means to integrate the design and knowledge base development process through automated knowledge base development from CAD/CAE databases and files. Benefits of this approach include the development of a more efficient means of knowledge engineering, resulting in the timely creation of large knowledge based systems that are inherently free of error.

  15. A knowledge-based support system for mechanical ventilation of the lungs. The KUSIVAR concept and prototype.

    Science.gov (United States)

    Rudowski, R; Frostell, C; Gill, H

    1989-09-01

    The KUSIVAR is an expert system for mechanical ventilation of adult patients suffering from respiratory insufficiency. Its main objective is to provide guidance in respirator management. The knowledge base includes both qualitative, rule-based knowledge and quantitative knowledge expressed in the form of mathematical models (expert control) which is used for prediction of arterial gas tensions and optimization purposes. The system is data driven and uses a forward chaining mechanism for rule invocation. The interaction with the user will be performed in advisory, critiquing, semi-automatic and automatic modes. The system is at present in an advanced prototype stage. Prototyping is performed using KEE (Knowledge Engineering Environment) on a Sperry Explorer workstation. For further development and clinical use the expert system will be downloaded to an advanced PC. The system is intended to support therapy with a Siemens-Elema Servoventilator 900 C.

  16. THE METHDOLOGICAL WAYS OF FORM OF THE KNOWLEDGE BASE OF THE AUTOMATIC SYSTEM DIAGNOSTICS OF THE COMPLEX AIRCRAFT OBJECT

    Directory of Open Access Journals (Sweden)

    Ю. Чоха

    2012-04-01

    Full Text Available Development of the Systems provides reception of the multitude of information and improvement of theiranalysis for diagnostics of aviation techniques. However theoretical bases deficiently are motivated forstructure and analysis of information. On modern stage of evolution of the artificial intelligence the trend istracked the outrun of technological (practical of the facilities of the development of the intellectual systemscomparatively their theoretical developments. In this connection in article the idea is emphasized thatclassical approaches to the analytical bases of the cybernetics have grown old. Accordingly by the base forensuring of functioning of the automatic diagnostics systems requisite to consider the ways (the strategies ofdecompositions and creature structure of the knowledge base in relation to of the concrete aviation object.However use of the syntheses of the deductive and of inductive strategy shaping the structure of theknowledge’s can be insufficient in some cases of making of the diagnostics system of the complex object ofthe aviation techniques with depth diagnosis at the constructive node. For this case on each of levels ofstructurization of the knowledge base, authors offer to apply also strategy of parallel (horizontaldecomposition of object of diagnosing concerning its behaviour at transition from one stationary operationalregimen on another. As a base paradigm of methodology of the structural analysis and formation of a field ofknowledge by authors are proffered to use generalised objective - the structural approach, which developedto technological and program realisation.

  17. Famine Early Warning Systems Network (FEWS NET) Agro-climatology Analysis Tools and Knowledge Base Products for Food Security Applications

    Science.gov (United States)

    Budde, M. E.; Rowland, J.; Anthony, M.; Palka, S.; Martinez, J.; Hussain, R.

    2017-12-01

    The U.S. Geological Survey (USGS) supports the use of Earth observation data for food security monitoring through its role as an implementing partner of the Famine Early Warning Systems Network (FEWS NET). The USGS Earth Resources Observation and Science (EROS) Center has developed tools designed to aid food security analysts in developing assumptions of agro-climatological outcomes. There are four primary steps to developing agro-climatology assumptions; including: 1) understanding the climatology, 2) evaluating current climate modes, 3) interpretation of forecast information, and 4) incorporation of monitoring data. Analysts routinely forecast outcomes well in advance of the growing season, which relies on knowledge of climatology. A few months prior to the growing season, analysts can assess large-scale climate modes that might influence seasonal outcomes. Within two months of the growing season, analysts can evaluate seasonal forecast information as indicators. Once the growing season begins, monitoring data, based on remote sensing and field information, can characterize the start of season and remain integral monitoring tools throughout the duration of the season. Each subsequent step in the process can lead to modifications of the original climatology assumption. To support such analyses, we have created an agro-climatology analysis tool that characterizes each step in the assumption building process. Satellite-based rainfall and normalized difference vegetation index (NDVI)-based products support both the climatology and monitoring steps, sea-surface temperature data and knowledge of the global climate system inform the climate modes, and precipitation forecasts at multiple scales support the interpretation of forecast information. Organizing these data for a user-specified area provides a valuable tool for food security analysts to better formulate agro-climatology assumptions that feed into food security assessments. We have also developed a knowledge

  18. MAPI's knowledge-based system will help to deal with abnormal conditions (in nuclear plants)

    International Nuclear Information System (INIS)

    Anon.

    1987-01-01

    Mitsubishi Atomic Power Industries (MAPI) in Japan is incorporating artificial intelligence characteristics into a system for guiding nuclear power plant operators during fault conditions. The central feature of the system is the incorporation of the operator's cognitive processes as the framework for its display of information and its mode of reasoning. A small scale prototype system has been developed and work is underway to produce and test a full-scale prototype system by 1991. (UK)

  19. The development of a knowledge-based decision support system for retail and service planning

    NARCIS (Netherlands)

    Arentze, T.A.; Borgers, A.W.J.; Timmermans, H.J.P.

    1995-01-01

    The integration of expert systems in DSS has led to a new generation of systems commonly referred to as know edge-based or intelligent DSS. This paper investigates the use of expert system technology for the development of a know edge-based DSS for the planning of retail and service facilities. The

  20. A Methodology for Multiple Rule System Integration and Resolution Within a Singular Knowledge Base

    Science.gov (United States)

    Kautzmann, Frank N., III

    1988-01-01

    Expert Systems which support knowledge representation by qualitative modeling techniques experience problems, when called upon to support integrated views embodying description and explanation, especially when other factors such as multiple causality, competing rule model resolution, and multiple uses of knowledge representation are included. A series of prototypes are being developed to demonstrate the feasibility of automating the process of systems engineering, design and configuration, and diagnosis and fault management. A study involves not only a generic knowledge representation; it must also support multiple views at varying levels of description and interaction between physical elements, systems, and subsystems. Moreover, it will involve models of description and explanation for each level. This multiple model feature requires the development of control methods between rule systems and heuristics on a meta-level for each expert system involved in an integrated and larger class of expert system. The broadest possible category of interacting expert systems is described along with a general methodology for the knowledge representation and control of mutually exclusive rule systems.

  1. A Knowledge-based System for the Analysis of the Ability of Paying back Loans

    Institute of Scientific and Technical Information of China (English)

    朱明; 杨保安

    2001-01-01

    This paper describes the development of a knowledgebased system (KBS) for determining whether or not, and under what conditions, a bank Ioan officer should grant a business loan to a company. The prototype system developed focuses on what is bank loans risks management, how to prevent risk by the analysis of the ability of paying back loans. The paper makes the structural analysis involved in the system's decision situation, the structured situation diagram or model, dependency diagram and the document needed by the KBS prototype system thus are developed. Through testing the samples from loan business, the quality for the analysis of the ability of paying back loans can be effectively evaluated by the KBS prototype system.

  2. Using Knowledge-Based Systems to Support Learning of Organizational Knowledge: A Case Study

    Science.gov (United States)

    Cooper, Lynne P.; Nash, Rebecca L.; Phan, Tu-Anh T.; Bailey, Teresa R.

    2003-01-01

    This paper describes the deployment of a knowledge system to support learning of organizational knowledge at the Jet Propulsion Laboratory (JPL), a US national research laboratory whose mission is planetary exploration and to 'do what no one has done before.' Data collected over 19 weeks of operation were used to assess system performance with respect to design considerations, participation, effectiveness of communication mechanisms, and individual-based learning. These results are discussed in the context of organizational learning research and implications for practice.

  3. Knowledge-based Adaptive Tracking Control of Electro-hydraulic Actuator Systems

    DEFF Research Database (Denmark)

    Hansen, Poul Erik

    1997-01-01

    The paper deal with intelligent motion control and electro-hydraulic actuator systems for multiaxis machynes and robots.The research results are from the IMCIA research Programme supported by the Danish Technical Research Council, STVF.......The paper deal with intelligent motion control and electro-hydraulic actuator systems for multiaxis machynes and robots.The research results are from the IMCIA research Programme supported by the Danish Technical Research Council, STVF....

  4. Application of knowledge based systems technology to the management of accidental spills

    International Nuclear Information System (INIS)

    Ouzilleau, F.; Serodes, J.-B.

    1992-01-01

    The AIDA personal computer based expert system has been developed to assist electric utility personnel in the case of a hydrocarbon chemical spill in a transformer yard. The types of accidents which could result in such a spill are described, and the role of expert systems in managing such an accident is explained. The stages of conceptual analysis and computer implementation of the AIDA expert system are then reviewed. To date, the AIDA system includes more than 600 rules and procedures which refer to over 450 variables or different facts. The architecture of the system is composed of four distinct rule bases, each associated with one of four stages of problem resolution (determination of the possible flow paths of pollutant if no action is taken, visual reconnaissance, selection and prioritization of locations where intervention should occur, and determination of the means of intervention appropriate for each location). Uniform procedures for reading of data and output of results allow each rule base to operate independently and only to recover the information that each requires. The AIDA man-machine interface is designed to allow the user to visualize the propagation of the pollutant in the environment, the management of the spill, and the necessary or useful information for understanding the reasoning behind the recommendations proposed by the expert system. 7 refs., 3 figs

  5. Detection of cyst using image segmentation and building knowledge-based intelligent decision support system as an aid to telemedicine

    Science.gov (United States)

    Janet, J.; Natesan, T. R.; Santhosh, Ramamurthy; Ibramsha, Mohideen

    2005-02-01

    An intelligent decision support tool to the Radiologist in telemedicine is described. Medical prescriptions are given based on the images of cyst that has been transmitted over computer networks to the remote medical center. The digital image, acquired by sonography, is converted into an intensity image. This image is then subjected to image preprocessing which involves correction methods to eliminate specific artifacts. The image is resized into a 256 x 256 matrix by using bilinear interpolation method. The background area is detected using distinct block operation. The area of the cyst is calculated by removing the background area from the original image. Boundary enhancement and morphological operations are done to remove unrelated pixels. This gives us the cyst volume. This segmented image of the cyst is sent to the remote medical center for analysis by Knowledge based artificial Intelligent Decision Support System (KIDSS). The type of cyst is detected and reported to the control mechanism of KIDSS. Then the inference engine compares this with the knowledge base and gives appropriate medical prescriptions or treatment recommendations by applying reasoning mechanisms at the remote medical center.

  6. Knowledge-based driver assistance systems traffic situation description and situation feature relevance

    CERN Document Server

    Huelsen, Michael

    2014-01-01

    The comprehension of a traffic situation plays a major role in driving a vehicle. Interpretable information forms a basis for future projection, decision making and action performing, such as navigating, maneuvering and driving control. Michael Huelsen provides an ontology-based generic traffic situation description capable of supplying various advanced driver assistance systems with relevant information about the current traffic situation of a vehicle and its environment. These systems are enabled to perform reasonable actions and approach visionary goals such as injury and accident free driv

  7. [P.A.I.S., a personal medical information system. A comprehensive medical knowledge base].

    Science.gov (United States)

    Münch, E

    1994-06-01

    The electronic medical knowledge data base DOPIS is a compliation of knowledge from various special fields of medicine. Using uniform nomenclature, the data are presented on demand as they would be in a book chapter. Concise updates can be performed at low cost. The primary structure of the concept is the division of medical knowledge into data banks on diagnosis, literature, medication and pharmacology, as well as so-called electronic textbooks. All data banks and electronic textbooks are connected associatively. Visual information is obtained via the image data bank connected to the diagnosis data bank and the electronic books. Moreover, DOPIS has an integrated patient findings system, as well as an image processing and archiving system with research values enabling research functions. The diagnosis and literature data banks can be modified by the user or author, or fed with their own data (a so-called Expert System Shell). For authors from special fields working on the project, an extra Medical Electronic Publishing System has been developed and made available for the electronic textbooks. The model for the knowledge data base has been developed in the field of ENT, the programme implemented and initially ENT data have been stored.

  8. The substantative knowledge base for travel and tourism: a systems model

    Science.gov (United States)

    David S. Solan

    1992-01-01

    Strategies for education and professional preparation in travel and tourism have generally been based in traditional tourism-related disciplines providing somewhat narrow perspectives of the tourism phenomenon. The need exists for models that provide comprehensive, holistic perspectives of travel and tourism. This paper presents one such systems model showing that...

  9. The "Digital Friend": A knowledge-based decision support system for space crews

    Science.gov (United States)

    Hoermann, Hans-Juergen; Johannes, Bernd; Petrovich Salnitski, Vyacheslav

    Space travel of far distances presents exceptional strain on the medical and psychological well-being of the astronauts who undertake such missions. An intelligent knowledge management system has been developed, to assist space crews on long-duration missions as an autonomous decision support system, called the "Digital Friend". This system will become available upon request for the purpose of coaching group processes and individual performance levels as well as aiding in tactical decision processes by taking crew condition parameters into account. In its initial stage, the "Digital Friend" utilizes interconnected layers of knowledge, which encompass relevant models of operational, situational, individual psycho-physiological as well as group processes. An example is the human life science model that contains historic, diagnostic, and prognostic knowledge about the habitual, actual, and anticipated patterns of physiological, cognitive, and group psychology parameters of the crew members. Depending on the available data derived from pre-mission screening, regular check-ups, or non-intrusive onboard monitoring, the "Digital Friend" can generate a situational analysis and diagnose potential problems. When coping with the effects of foreseeable and unforeseen stressors encountered during the mission, the system can provide feedback and support the crew with a recommended course of actions. The first prototype of the "Digital Friend" employs the Neurolab/Healthlab platform developed in a cooperation of DLR and IBMP. The prototype contains psycho-physiological sensors with multiple Heally Satellites that relay data to the intelligent Heally Masters and a telemetric Host station. The analysis of data from a long-term simulation study illustrates how the system can be used to estimate the operators' current level of skill reliability based on Salnitski's model [V. Salnitski, A. Bobrov, A. Dudukin, B. Johannes, Reanalysis of operators reliability in professional skills

  10. Development in the application of knowledge base systems in the Canadian nuclear industry

    International Nuclear Information System (INIS)

    Anderson, J.W.D.; Natalizio, A.; Stevens, J.E.S.

    1987-01-01

    Atomic Energy of Canada Limited (AECL) is a leader in the area of computer monitoring and control of nuclear power plants. The high level of plant computerization in CANDU stations has not only provided benefits in terms of more reliable plant operation but also in terms of improved man-machine interface. Today, new opportunities for improvements in safety and performance include distributed control systems, data highways and improved operator aids. The most exciting innovation is the development of expert systems aimed at assisting the operator in areas such as: fault management and diagnosis, identification of limiting conditions of operation, assessment of heat sink availability, optimization of on-power fuelling schemes, and computerization of procedures and communication

  11. Querying Natural Logic Knowledge Bases

    DEFF Research Database (Denmark)

    Andreasen, Troels; Bulskov, Henrik; Jensen, Per Anker

    2017-01-01

    This paper describes the principles of a system applying natural logic as a knowledge base language. Natural logics are regimented fragments of natural language employing high level inference rules. We advocate the use of natural logic for knowledge bases dealing with querying of classes...... in ontologies and class-relationships such as are common in life-science descriptions. The paper adopts a version of natural logic with recursive restrictive clauses such as relative clauses and adnominal prepositional phrases. It includes passive as well as active voice sentences. We outline a prototype...... for partial translation of natural language into natural logic, featuring further querying and conceptual path finding in natural logic knowledge bases....

  12. Hologram representation of design data in an expert system knowledge base

    Science.gov (United States)

    Shiva, S. G.; Klon, Peter F.

    1988-01-01

    A novel representational scheme for design object descriptions is presented. An abstract notion of modules and signals is developed as a conceptual foundation for the scheme. This abstraction relates the objects to the meaning of system descriptions. Anchored on this abstraction, a representational model which incorporates dynamic semantics for these objects is presented. This representational model is called a hologram scheme since it represents dual level information, namely, structural and semantic. The benefits of this scheme are presented.

  13. A fuzzy knowledge based method for maintenance planning in a power system

    International Nuclear Information System (INIS)

    Sergaki, Amalia; Kalaitzakis, Kostas

    2002-01-01

    The inspection planning in electric power industry is used to assess the safety and reliability of system components and to increase the ability of failure situation identification before it actually occurs. It reflects the implications of the available information on the operational and maintenance history of the system. The output is a ranked list of components, with the most critical ones at the top, which indicates the selection of the components to be inspected. In this paper, we demonstrate the use of a fuzzy relational database model for manipulating the data required for the criticality component ranking in thermal power systems inspection planning, incorporating criteria concerning aspects of safety and reliability, economy, variable operational conditions and environmental impacts. Often, qualitative thresholds and linguistic terms are used for the component criticality analysis. Fuzzy linguistic terms for criteria definitions along with fuzzy inference mechanisms allow the exploitation of the operators' expertise. The proposed database model ensures the representation and handling of the aforementioned fuzzy information and additionally offers to the user the functionality for specifying the precision degree by which the conditions involved in a query are satisfied. In order to illustrate the behavior of the model, a case study is given using real inspection data

  14. Knowledge-based changes to health systems: the Thai experience in policy development.

    Science.gov (United States)

    Tangcharoensathien, Viroj; Wibulpholprasert, Suwit; Nitayaramphong, Sanguan

    2004-10-01

    Over the past two decades the government in Thailand has adopted an incremental approach to extending health-care coverage to the population. It first offered coverage to government employees and their dependents, and then introduced a scheme under which low-income people were exempt from charges for health care. This scheme was later extended to include elderly people, children younger than 12 years of age and disabled people. A voluntary public insurance scheme was implemented to cover those who could afford to pay for their own care. Private sector employees were covered by the Social Health Insurance scheme, which was implemented in 1991. Despite these efforts, 30% of the population remained uninsured in 2001. In October of that year, the new government decided to embark on a programme to provide universal health-care coverage. This paper describes how research into health systems and health policy contributed to the move towards universal coverage. Data on health systems financing and functioning had been gathered before and after the founding of the Health Systems Research Institute in early 1990. In 1991, a contract capitation model had been used to launch the Social Health Insurance scheme. The advantages of using a capitation model are that it contains costs and provides an acceptable quality of service as opposed to the cost escalation and inefficiency that occur under fee-for-service reimbursement models, such as the one used to provide medical benefits to civil servants. An analysis of the implementation of universal coverage found that politics moved universal coverage onto the policy agenda during the general election campaign in January 2001. The capacity for research on health systems and policy to generate evidence guided the development of the policy and the design of the system at a later stage. Because the reformists who sought to bring about universal coverage (who were mostly civil servants in the Ministry of Public Health and members of

  15. Precursor systems analyses of automated highway systems. Knowledge based systems and learning methods for AHS. Volume 10. Final report, September 1993-February 1995

    Energy Technology Data Exchange (ETDEWEB)

    Schmoltz, J.; Blumer, A.; Noonan, J.; Shedd, D.; Twarog, J.

    1995-06-01

    Managing each AHS vehicle and the AHS system as a whole is an extremely complex yndertaking. The authors have investigated and now report on Artificial Intelligence (AI) approaches that can help. In particular, we focus on AI technologies known as Knowledge Based Systems (KBSs) and Learning Methods (LMs). Our primary purpose is to identify opportunities: we identify several problems in AHS and AI technologies that can solve them. Our secondary purpose is to examine in some detail a subset of these opportunities: we examine how KBSs and LMs can help in controlling the high level movements--e.g., keep in lane, change lanes, speed up, slow down--of an automated vehicle. This detailed examination includes the implementation of a prototype system having three primary components. The Tufts Automated Highway System Kit(TAHSK) discrete time micro-level traffic simulator is a generic AHS simulator. TAHSK interfaces with the Knowledge Based Controller (KBCon) knowledge based high level controller, which controls the high level actions of individual AHS vehicles. Finally, TAHSK also interfaces with a Reinforcement learning (RL) module that was used to explore the possibilities of RL techniques in an AHS environment.

  16. Knowledge-based low-level image analysis for computer vision systems

    Science.gov (United States)

    Dhawan, Atam P.; Baxi, Himanshu; Ranganath, M. V.

    1988-01-01

    Two algorithms for entry-level image analysis and preliminary segmentation are proposed which are flexible enough to incorporate local properties of the image. The first algorithm involves pyramid-based multiresolution processing and a strategy to define and use interlevel and intralevel link strengths. The second algorithm, which is designed for selected window processing, extracts regions adaptively using local histograms. The preliminary segmentation and a set of features are employed as the input to an efficient rule-based low-level analysis system, resulting in suboptimal meaningful segmentation.

  17. Application of Goal Tree-Success Tree model as the knowledge-base of operator advisory systems

    International Nuclear Information System (INIS)

    Kim, I.S.; Modarres, M.

    1987-01-01

    The most important portion of an expert system development is the articulation of knowledge by the expert and its satisfactory formulation in a suitable knowledge representation scheme for mechanization by a computer. A 'deep knowledge' approach called Goal Tree-Success Tree model is devised to represent complex dynamic domain knowledge. This approach can hierarchically model the underlying principles of a given process domain (for example nuclear power plant operations domain). The Goal Tree-Success Tree can then be used to represent the knowledge-base and provide means of selecting an efficient search routine in the inference engine of an expert system. A prototype expert system has been developed to demonstrate the method. This expert system models the operation of a typical system used in the pressurized water reactors. The expert system is modeled for real-time operations if an interface between plant parameters and the expert system is established. The real-time operation provides an ability to quickly remedy minor disturbances that can quickly lead to a system malfunction or trip. A description of both the Goal Tree-Success Tree model and the prototype expert system is presented. (orig.)

  18. Demonstration Integrated Knowledge-Based System for Estimating Human Error Probabilities

    Energy Technology Data Exchange (ETDEWEB)

    Auflick, Jack L.

    1999-04-21

    Human Reliability Analysis (HRA) is currently comprised of at least 40 different methods that are used to analyze, predict, and evaluate human performance in probabilistic terms. Systematic HRAs allow analysts to examine human-machine relationships, identify error-likely situations, and provide estimates of relative frequencies for human errors on critical tasks, highlighting the most beneficial areas for system improvements. Unfortunately, each of HRA's methods has a different philosophical approach, thereby producing estimates of human error probabilities (HEPs) that area better or worse match to the error likely situation of interest. Poor selection of methodology, or the improper application of techniques can produce invalid HEP estimates, where that erroneous estimation of potential human failure could have potentially severe consequences in terms of the estimated occurrence of injury, death, and/or property damage.

  19. Knowledge based expert system to minimise environmental pollution in Malaysian construction sites

    Energy Technology Data Exchange (ETDEWEB)

    Al-Hadu, Ibrahiem Abdul Razak; Sidek, Lariyah Mohd; Desa, Mohamad Nor Mohamad [Civil Engineering, Universiti Tenaga Nasional, Kajang, Selangor (Malaysia); Basri, Noor Ezlin Ahmad [Civil Engineering, Universiti Tenaga Nasional, Kajang, Selangor (Malaysia)

    2011-07-01

    Construction activities generate enormous amount of erosion and sediments sediments that is the result of soil disturbance during construction activities, thus, will pollute the adjacent water bodies and make it unfeasible for different uses. This paper aimed to develop and create the main features of an expert system prototype (ESCES) for minimising erosion and sedimentation due to stormwater generated from the construction activities by recommending a feasible BMPs. Multi criteria Analysis (MCA) technique has been integrated so as to select the best control measure among many stormwater control alternatives. A questionnaire has been distributed to the relevant experts so as to rank the stormwater control measures to be used in the MCA technique. Using Visual Basic 6, Graphical User Interfaces (GUIs) were developed. The knowledge and experience were acquired from various textural sources (i.e. guidelines, manuals, literature, and human expert). Results from this study showed that the Best Management Practices (BMPs) reommended have good suited the site characteristics. As a conclusion from this study, the ESCES can be considered as part of the 'Green Technology Tool' since it helps in protecting the environment and preserve good quality of water adjacent to the construction sites in Malaysia.

  20. Development of a knowledge-based system for the design of composite automotive components

    Science.gov (United States)

    Moynihan, Gary P.; Stephens, J. Paul

    1997-01-01

    Composite materials are comprised of two or more constituents possessing significantly different physical properties. Due to their high strength and light weight, there is an emerging trend to utilize composites in the automotive industry. There is an inherent link between component design and the manufacturing processes necessary for fabrication. To many designers, this situation may be intimidating, since there is frequently little available understanding of composites and their processes. A direct results is high rates of product scrap and rework. Thus, there is a need to implement a systematic approach to composite material design. One such approach is quality function deployment (QFD). By translating customer requirements into design parameters, through the use of heuristics, QFD supports the improvement of product quality during the planning stages prior to actual production. The purpose of this research is to automate the use of knowledge pertaining to the design and application of composite materials within the automobile industry. This is being accomplished through the development of a prototype expert system incorporating a QFD approach. It will provide industry designers with access to knowledge of composite materials that might not be otherwise available.

  1. Ontology Language to Support Description of Experiment Control System Semantics, Collaborative Knowledge-Base Design and Ontology Reuse

    International Nuclear Information System (INIS)

    Gyurjyan, Vardan; Abbott, D.; Heyes, G.; Jastrzembski, E.; Moffit, B.; Timmer, C.; Wolin, E.

    2009-01-01

    In this paper we discuss the control domain specific ontology that is built on top of the domain-neutral Resource Definition Framework (RDF). Specifically, we will discuss the relevant set of ontology concepts along with the relationships among them in order to describe experiment control components and generic event-based state machines. Control Oriented Ontology Language (COOL) is a meta-data modeling language that provides generic means for representation of physics experiment control processes and components, and their relationships, rules and axioms. It provides a semantic reference frame that is useful for automating the communication of information for configuration, deployment and operation. COOL has been successfully used to develop a complete and dynamic knowledge-base for experiment control systems, developed using the AFECS framework.

  2. Leveraging on Information Technology to Teach Construction Law to Built Environment Students: A Knowledge-Based System (KBS Approach

    Directory of Open Access Journals (Sweden)

    Faisal Manzoor Arain

    2009-11-01

    Full Text Available Construction law is a vital component of the body of knowledge that is needed by construction professionals in order to successfully operate in the commercial world of construction. Construction law plays an important role in shaping building projects. Construction projects are complex because they involve many human and non-human factors and variables. Teaching construction law is therefore a complex issue with several dimensions. In recent years, Information Technology (IT has become strongly established as a supporting tool for many professions, including teachers. If faculty members have a knowledge base established on similar past projects, it would assist the faculty members to present case studies and contractually based scenarios to students. This paper proposes potential utilisation of a Knowledge-based System (KBS for teaching construction law to built environment students. The KBS is primarily designed for building professionals to learn from similar past projects. The KBS is able to assist professionals by providing accurate and timelyinformation for decision making and a user-friendly tool for analysing and selecting the suggested controls for variations in educational buildings. It is recommended that the wealth of knowledge available in the KBS can be very helpful in teaching construction law to built environment students. The system presents real case studies and scenarios to students to allow them to analyse and learn construction law. The KBS could be useful to students as a general research tool because the students could populate it with their own data and use it with the reported educational projects. With further generic modifications, the KBS will also be useful for built environment students to learn about project management of building projects; thus, it will raise the overall level of professional understanding, and eventually productivity, in the construction industry.

  3. Knowledge Base Editor (SharpKBE)

    Science.gov (United States)

    Tikidjian, Raffi; James, Mark; Mackey, Ryan

    2007-01-01

    The SharpKBE software provides a graphical user interface environment for domain experts to build and manage knowledge base systems. Knowledge bases can be exported/translated to various target languages automatically, including customizable target languages.

  4. Monitoring Knowledge Base (MKB)

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Monitoring Knowledge Base (MKB) is a compilation of emissions measurement and monitoring techniques associated with air pollution control devices, industrial...

  5. Evaluation of an automated knowledge-based textual summarization system for longitudinal clinical data, in the intensive care domain.

    Science.gov (United States)

    Goldstein, Ayelet; Shahar, Yuval; Orenbuch, Efrat; Cohen, Matan J

    2017-10-01

    To examine the feasibility of the automated creation of meaningful free-text summaries of longitudinal clinical records, using a new general methodology that we had recently developed; and to assess the potential benefits to the clinical decision-making process of using such a method to generate draft letters that can be further manually enhanced by clinicians. We had previously developed a system, CliniText (CTXT), for automated summarization in free text of longitudinal medical records, using a clinical knowledge base. In the current study, we created an Intensive Care Unit (ICU) clinical knowledge base, assisted by two ICU clinical experts in an academic tertiary hospital. The CTXT system generated free-text summary letters from the data of 31 different patients, which were compared to the respective original physician-composed discharge letters. The main evaluation measures were (1) relative completeness, quantifying the data items missed by one of the letters but included by the other, and their importance; (2) quality parameters, such as readability; (3) functional performance, assessed by the time needed, by three clinicians reading each of the summaries, to answer five key questions, based on the discharge letter (e.g., "What are the patient's current respiratory requirements?"), and by the correctness of the clinicians' answers. Completeness: In 13/31 (42%) of the letters the number of important items missed in the CTXT-generated letter was actually less than or equal to the number of important items missed by the MD-composed letter. In each of the MD-composed letters, at least two important items that were mentioned by the CTXT system were missed (a mean of 7.2±5.74). In addition, the standard deviation in the number of missed items in the MD letters (STD=15.4) was much higher than the standard deviation in the CTXT-generated letters (STD=5.3). Quality: The MD-composed letters obtained a significantly better grade in three out of four measured parameters

  6. Knowledge based decision making method for the selection of mixed refrigerant systems for energy efficient LNG processes

    International Nuclear Information System (INIS)

    Khan, Mohd Shariq; Lee, Sanggyu; Rangaiah, G.P.; Lee, Moonyong

    2013-01-01

    Highlights: • Practical method for finding optimum refrigerant composition is proposed for LNG plant. • Knowledge of boiling point differences in refrigerant component is employed. • Implementation of process knowledge notably makes LNG process energy efficient. • Optimization of LNG plant is more transparent using process knowledge. - Abstract: Mixed refrigerant (MR) systems are used in many industrial applications because of their high energy efficiency, compact design and energy-efficient heat transfer compared to other processes operating with pure refrigerants. The performance of MR systems depends strongly on the optimum refrigerant composition, which is difficult to obtain. This paper proposes a simple and practical method for selecting the appropriate refrigerant composition, which was inspired by (i) knowledge of the boiling point difference in MR components, and (ii) their specific refrigeration effect in bringing a MR system close to reversible operation. A feasibility plot and composite curves were used for full enforcement of the approach temperature. The proposed knowledge-based optimization approach was described and applied to a single MR and a propane precooled MR system for natural gas liquefaction. Maximization of the heat exchanger exergy efficiency was considered as the optimization objective to achieve an energy efficient design goal. Several case studies on single MR and propane precooled MR processes were performed to show the effectiveness of the proposed method. The application of the proposed method is not restricted to liquefiers, and can be applied to any refrigerator and cryogenic cooler where a MR is involved

  7. Ontology-Driven Knowledge-Based Health-Care System, An Emerging Area - Challenges And Opportunities - Indian Scenario

    Science.gov (United States)

    Sunitha, A.; Babu, G. Suresh

    2014-11-01

    Recent studies in the decision making efforts in the area of public healthcare systems have been tremendously inspired and influenced by the entry of ontology. Ontology driven systems results in the effective implementation of healthcare strategies for the policy makers. The central source of knowledge is the ontology containing all the relevant domain concepts such as locations, diseases, environments and their domain sensitive inter-relationships which is the prime objective, concern and the motivation behind this paper. The paper further focuses on the development of a semantic knowledge-base for public healthcare system. This paper describes the approach and methodologies in bringing out a novel conceptual theme in establishing a firm linkage between three different ontologies related to diseases, places and environments in one integrated platform. This platform correlates the real-time mechanisms prevailing within the semantic knowledgebase and establishing their inter-relationships for the first time in India. This is hoped to formulate a strong foundation for establishing a much awaited basic need for a meaningful healthcare decision making system in the country. Introduction through a wide range of best practices facilitate the adoption of this approach for better appreciation, understanding and long term outcomes in the area. The methods and approach illustrated in the paper relate to health mapping methods, reusability of health applications, and interoperability issues based on mapping of the data attributes with ontology concepts in generating semantic integrated data driving an inference engine for user-interfaced semantic queries.

  8. Use of knowledge based systems for rational reliability analysis based inspection and maintenance planning for offshore structures

    International Nuclear Information System (INIS)

    Tang, M.X.; Dharmavasan, S.; Peers, S.M.C.

    1994-01-01

    The structural integrity of fixed offshore platforms is ensured by periodic inspections. In the past, decisions made as to when, where and how to inspect have been made by engineers using rules-of-thumb and general planning heuristics. It is now hoped that more rational inspection and maintenance scheduling may be carried out by applying recently developed techniques based on structural reliability methods. However, one of the problems associated with a theoretical approach is that it is not always possible to incorporate all the constraints that are present in a practical situation. These constraints modify the decisions made for analysis data input and the interpretation of the analysis results. Knowledge based systems provide a mean of encapsulating several different forms of information and knowledge within a computer system and hence can overcome this problem. In this paper, a prototype system being developed for integrating reliability based analysis with other constraints for inspection scheduling will be described. In addition, the scheduling model and the algorithms to carry out the scheduling will be explained. Furthermore, implementation details are also given

  9. Foundation: Transforming data bases into knowledge bases

    Science.gov (United States)

    Purves, R. B.; Carnes, James R.; Cutts, Dannie E.

    1987-01-01

    One approach to transforming information stored in relational data bases into knowledge based representations and back again is described. This system, called Foundation, allows knowledge bases to take advantage of vast amounts of pre-existing data. A benefit of this approach is inspection, and even population, of data bases through an intelligent knowledge-based front-end.

  10. A knowledge-based taxonomy of critical factors for adopting electronic health record systems by physicians: a systematic literature review.

    Science.gov (United States)

    Castillo, Víctor H; Martínez-García, Ana I; Pulido, J R G

    2010-10-15

    The health care sector is an area of social and economic interest in several countries; therefore, there have been lots of efforts in the use of electronic health records. Nevertheless, there is evidence suggesting that these systems have not been adopted as it was expected, and although there are some proposals to support their adoption, the proposed support is not by means of information and communication technology which can provide automatic tools of support. The aim of this study is to identify the critical adoption factors for electronic health records by physicians and to use them as a guide to support their adoption process automatically. This paper presents, based on the PRISMA statement, a systematic literature review in electronic databases with adoption studies of electronic health records published in English. Software applications that manage and process the data in the electronic health record have been considered, i.e.: computerized physician prescription, electronic medical records, and electronic capture of clinical data. Our review was conducted with the purpose of obtaining a taxonomy of the physicians main barriers for adopting electronic health records, that can be addressed by means of information and communication technology; in particular with the information technology roles of the knowledge management processes. Which take us to the question that we want to address in this work: "What are the critical adoption factors of electronic health records that can be supported by information and communication technology?". Reports from eight databases covering electronic health records adoption studies in the medical domain, in particular those focused on physicians, were analyzed. The review identifies two main issues: 1) a knowledge-based classification of critical factors for adopting electronic health records by physicians; and 2) the definition of a base for the design of a conceptual framework for supporting the design of knowledge-based

  11. A knowledge-based taxonomy of critical factors for adopting electronic health record systems by physicians: a systematic literature review

    Directory of Open Access Journals (Sweden)

    Martínez-García Ana I

    2010-10-01

    Full Text Available Abstract Background The health care sector is an area of social and economic interest in several countries; therefore, there have been lots of efforts in the use of electronic health records. Nevertheless, there is evidence suggesting that these systems have not been adopted as it was expected, and although there are some proposals to support their adoption, the proposed support is not by means of information and communication technology which can provide automatic tools of support. The aim of this study is to identify the critical adoption factors for electronic health records by physicians and to use them as a guide to support their adoption process automatically. Methods This paper presents, based on the PRISMA statement, a systematic literature review in electronic databases with adoption studies of electronic health records published in English. Software applications that manage and process the data in the electronic health record have been considered, i.e.: computerized physician prescription, electronic medical records, and electronic capture of clinical data. Our review was conducted with the purpose of obtaining a taxonomy of the physicians main barriers for adopting electronic health records, that can be addressed by means of information and communication technology; in particular with the information technology roles of the knowledge management processes. Which take us to the question that we want to address in this work: "What are the critical adoption factors of electronic health records that can be supported by information and communication technology?". Reports from eight databases covering electronic health records adoption studies in the medical domain, in particular those focused on physicians, were analyzed. Results The review identifies two main issues: 1 a knowledge-based classification of critical factors for adopting electronic health records by physicians; and 2 the definition of a base for the design of a conceptual

  12. A first-principles generic methodology for representing the knowledge base of a process diagnostic expert system

    International Nuclear Information System (INIS)

    Reifman, J.; Briggs, L.L.; Wei, T.Y.C.

    1990-01-01

    In this paper we present a methodology for identifying faulty component candidates of process malfunctions through basic physical principles of conservation, functional classification of components and information from the process schematics. The basic principles of macroscopic balance of mass, momentum and energy in thermal hydraulic control volumes are applied in a novel approach to incorporate deep knowledge into the knowledge base. Additional deep knowledge is incorporated through the functional classification of process components according to their influence in disturbing the macroscopic balance equations. Information from the process schematics is applied to identify the faulty component candidates after the type of imbalance in the control volumes is matched against the functional classification of the components. Except for the information from the process schematics, this approach is completely general and independent of the process under consideration. The use of basic first-principles, which are physically correct, and the process-independent architecture of the diagnosis procedure allow for the verification and validation of the system. A prototype process diagnosis expert system is developed and a test problem is presented to identify faulty component candidates in the presence of a single failure in a hypothetical balance of plant of a liquid metal nuclear reactor plant

  13. Generating Big Data Sets from Knowledge-based Decision Support Systems to Pursue Value-based Healthcare

    Directory of Open Access Journals (Sweden)

    Arturo González-Ferrer

    2018-03-01

    Full Text Available Talking about Big Data in healthcare we usually refer to how to use data collected from current electronic medical records, either structured or unstructured, to answer clinically relevant questions. This operation is typically carried out by means of analytics tools (e.g. machine learning or by extracting relevant data from patient summaries through natural language processing techniques. From other perspective of research in medical informatics, powerful initiatives have emerged to help physicians taking decisions, in both diagnostics and therapeutics, built from the existing medical evidence (i.e. knowledge-based decision support systems. Much of the problems these tools have shown, when used in real clinical settings, are related to their implementation and deployment, more than failing in its support, but, technology is slowly overcoming interoperability and integration issues. Beyond the point-of-care decision support these tools can provide, the data generated when using them, even in controlled trials, could be used to further analyze facts that are traditionally ignored in the current clinical practice. In this paper, we reflect on the technologies available to make the leap and how they could help driving healthcare organizations shifting to a value-based healthcare philosophy.

  14. Guidelines for the verification and validation of expert system software and conventional software: Volume 4, Evaluation of knowledge base certification methods. Final report

    International Nuclear Information System (INIS)

    Miller, L.A.; Hayes, J.E.; Mirsky, S.M.

    1995-05-01

    Objective is the formulation of guidelines for the V ampersand V of expert systems for use in nuclear power applications. This activity is concerned with the development and testing of various methods for assuring the quality of knowledge bases. The testing procedure used was that of behavioral experiment, the first known such evaluation of any of V ampersand V activity; the value lies in the capability to provide empirical evidence for or against the effectiveness of plausible methods in helping people find problems in knowledge bases. The three-day experiment included 20 participants from three nuclear utilities, the Nuclear Regulatory Commission's Technical training Center, University of Maryland, EG ampersand G Idaho, and SAIC. The study used two real nuclear expert systems: a boiling water reactor emergency operating procedures tracking system and a pressurized water reactor safety assessment systems. Ten participants were assigned to each of the expert systems. All participants were trained in and then used a sequence of four different V ampersand V methods selected as being the best and most appropriate. These methods either involved the analysis and tracing of requirements to elements in the knowledge base or direct inspection of the knowledge base for various kinds of errors. Half of the subjects within each system group used the best annual variant of the V ampersand V methods (the control group), while the other half were supported by the results of applying real or simulated automated tools to the knowledge bases (the experimental group). The four groups of participants were similar in nuclear engineering and software experience characteristics. It is concluded that the use of tools in static knowledge base certification results in significant improvement in detecting all types of defects, avoiding false alarms, and completing the effort in less time. The simulated knowledge-checking tool, based on supplemental engineering information about the systems

  15. Guidelines for the verification and validation of expert system software and conventional software: Evaluation of knowledge base certification methods. Volume 4

    International Nuclear Information System (INIS)

    Miller, L.A.; Hayes, J.E.; Mirsky, S.M.

    1995-03-01

    This report presents the results of the Knowledge Base Certification activity of the expert systems verification and validation (V ampersand V) guideline development project which is jointly funded by the US Nuclear Regulatory Commission and the Electric Power Research Institute. The ultimate objective is the formulation of guidelines for the V ampersand V of expert systems for use in nuclear power applications. This activity is concerned with the development and testing of various methods for assuring the quality of knowledge bases. The testing procedure used was that of behavioral experiment, the first known such evaluation of any type of V ampersand V activity. The value of such experimentation is its capability to provide empirical evidence for -- or against -- the effectiveness of plausible methods in helping people find problems in knowledge bases. The three-day experiment included 20 participants from three nuclear utilities, the Nuclear Regulatory Commission's Technical training Center, the University of Maryland, EG ampersand G Idaho, and SAIC. The study used two real nuclear expert systems: a boiling water reactor emergency operating procedures tracking system and a pressurized water reactor safety assessment systems. Ten participants were assigned to each of the expert systems. All participants were trained in and then used a sequence of four different V ampersand V methods selected as being the best and most appropriate for study on the basis of prior evaluation activities. These methods either involved the analysis and tracing of requirements to elements in the knowledge base (requirements grouping and requirements tracing) or else involved direct inspection of the knowledge base for various kinds of errors. Half of the subjects within each system group used the best manual variant of the V ampersand V methods (the control group), while the other half were supported by the results of applying real or simulated automated tools to the knowledge bases

  16. Modeling the Construct of an Expert Evidence-Adaptive Knowledge Base for a Pressure Injury Clinical Decision Support System

    Directory of Open Access Journals (Sweden)

    Peck Chui Betty Khong

    2017-07-01

    Full Text Available The selection of appropriate wound products for the treatment of pressure injuries is paramount in promoting wound healing. However, nurses find it difficult to decide on the most optimal wound product(s due to limited live experiences in managing pressure injuries resulting from successfully implemented pressure injury prevention programs. The challenges of effective decision-making in wound treatments by nurses at the point of care are compounded by the yearly release of wide arrays of newly researched wound products into the consumer market. A clinical decision support system for pressure injury (PI-CDSS was built to facilitate effective decision-making and selection of optimal wound treatments. This paper describes the development of PI-CDSS with an expert knowledge base using an interactive development environment, Blaze Advisor. A conceptual framework using decision-making and decision theory, knowledge representation, and process modelling guided the construct of the PI-CDSS. This expert system has incorporated the practical and relevant decision knowledge of wound experts in assessment and wound treatments in its algorithm. The construct of the PI-CDSS is adaptive, with scalable capabilities for expansion to include other CDSSs and interoperability to interface with other existing clinical and administrative systems. The algorithm was formatively evaluated and tested for usability. The treatment modalities generated after using patient-specific assessment data were found to be consistent with the treatment plan(s proposed by the wound experts. The overall agreement exceeded 90% between the wound experts and the generated treatment modalities for the choice of wound products, instructions, and alerts. The PI-CDSS serves as a just-in-time wound treatment protocol with suggested clinical actions for nurses, based on the best evidence available.

  17. Evolving Expert Knowledge Bases: Applications of Crowdsourcing and Serious Gaming to Advance Knowledge Development for Intelligent Tutoring Systems

    Science.gov (United States)

    Floryan, Mark

    2013-01-01

    This dissertation presents a novel effort to develop ITS technologies that adapt by observing student behavior. In particular, we define an evolving expert knowledge base (EEKB) that structures a domain's information as a set of nodes and the relationships that exist between those nodes. The structure of this model is not the particularly novel…

  18. Applications of artificial intelligence 1993: Knowledge-based systems in aerospace and industry; Proceedings of the Meeting, Orlando, FL, Apr. 13-15, 1993

    Science.gov (United States)

    Fayyad, Usama M. (Editor); Uthurusamy, Ramasamy (Editor)

    1993-01-01

    The present volume on applications of artificial intelligence with regard to knowledge-based systems in aerospace and industry discusses machine learning and clustering, expert systems and optimization techniques, monitoring and diagnosis, and automated design and expert systems. Attention is given to the integration of AI reasoning systems and hardware description languages, care-based reasoning, knowledge, retrieval, and training systems, and scheduling and planning. Topics addressed include the preprocessing of remotely sensed data for efficient analysis and classification, autonomous agents as air combat simulation adversaries, intelligent data presentation for real-time spacecraft monitoring, and an integrated reasoner for diagnosis in satellite control. Also discussed are a knowledge-based system for the design of heat exchangers, reuse of design information for model-based diagnosis, automatic compilation of expert systems, and a case-based approach to handling aircraft malfunctions.

  19. Development of diagnosis and maintenance support system for nuclear power plants with flexible inference function and knowledge base edition support function

    International Nuclear Information System (INIS)

    Fujii, Makoto; Seki, Eiji; Tai, Ichiro; Morioka, Toshihiko

    1988-01-01

    For the reliable and efficient diagnosis and inspection work of the nuclear power plant equipments, 'Diagnosis and Maintenance Support System' has been developed. This system has functions to assist operators or engineers to observe and evaluate equipment conditions based on the experts' knowledge. These functions are carried out through dialogue between the system and users. This system has two subsystems: diagnosis subsystem and knowledge base edition support subsystem. To achieve the functions of diagnosis subsystem, a new method of knowledge processing for equipment diagnosis is adopted. This method is based on the concept of 'Cause Generation and Checking'. Knowledge for diagnosis is represented with modularized production rules. And each rule module consists of four different type rules with hierarchical structure. With this approach, the system is equipped with sufficient performance not only in diagnosis function but also in flexible man-machine interface. Knowledge base edition support subsystem (Graphical Rule Editor) is provided for this system. This editor has functions to display and edit the contents of knowledge base with tree structures through the graphic display. With these functions, the efficiency of constructing expert system is highly improved. By applying this system to the maintenance support of neutron monitoring system, it is proved that this system has satisfactory performance as a diagnosis and maintenance support system. (author)

  20. A knowledge base browser using hypermedia

    Science.gov (United States)

    Pocklington, Tony; Wang, Lui

    1990-01-01

    A hypermedia system is being developed to browse CLIPS (C Language Integrated Production System) knowledge bases. This system will be used to help train flight controllers for the Mission Control Center. Browsing this knowledge base will be accomplished either by having navigating through the various collection nodes that have already been defined, or through the query languages.

  1. Automated knowledge-base refinement

    Science.gov (United States)

    Mooney, Raymond J.

    1994-01-01

    Over the last several years, we have developed several systems for automatically refining incomplete and incorrect knowledge bases. These systems are given an imperfect rule base and a set of training examples and minimally modify the knowledge base to make it consistent with the examples. One of our most recent systems, FORTE, revises first-order Horn-clause knowledge bases. This system can be viewed as automatically debugging Prolog programs based on examples of correct and incorrect I/O pairs. In fact, we have already used the system to debug simple Prolog programs written by students in a programming language course. FORTE has also been used to automatically induce and revise qualitative models of several continuous dynamic devices from qualitative behavior traces. For example, it has been used to induce and revise a qualitative model of a portion of the Reaction Control System (RCS) of the NASA Space Shuttle. By fitting a correct model of this portion of the RCS to simulated qualitative data from a faulty system, FORTE was also able to correctly diagnose simple faults in this system.

  2. Knowledge based maintenance

    Energy Technology Data Exchange (ETDEWEB)

    Sturm, A [Hamburgische Electacitaets-Werke AG Hamburg (Germany)

    1998-12-31

    The establishment of maintenance strategies is of crucial significance for the reliability of a plant and the economic efficiency of maintenance measures. Knowledge about the condition of components and plants from the technical and business management point of view therefore becomes one of the fundamental questions and the key to efficient management and maintenance. A new way to determine the maintenance strategy can be called: Knowledge Based Maintenance. A simple method for determining strategies while taking the technical condition of the components of the production process into account to the greatest possible degree which can be shown. A software with an algorithm for Knowledge Based Maintenance leads the user during complex work to the determination of maintenance strategies for this complex plant components. (orig.)

  3. Knowledge based maintenance

    Energy Technology Data Exchange (ETDEWEB)

    Sturm, A. [Hamburgische Electacitaets-Werke AG Hamburg (Germany)

    1997-12-31

    The establishment of maintenance strategies is of crucial significance for the reliability of a plant and the economic efficiency of maintenance measures. Knowledge about the condition of components and plants from the technical and business management point of view therefore becomes one of the fundamental questions and the key to efficient management and maintenance. A new way to determine the maintenance strategy can be called: Knowledge Based Maintenance. A simple method for determining strategies while taking the technical condition of the components of the production process into account to the greatest possible degree which can be shown. A software with an algorithm for Knowledge Based Maintenance leads the user during complex work to the determination of maintenance strategies for this complex plant components. (orig.)

  4. Knowledge Based Economy Assessment

    OpenAIRE

    Madalina Cristina Tocan

    2012-01-01

    The importance of knowledge-based economy (KBE) in the XXI century is evident. In the article the reflection of knowledge on economy is analyzed. The main point is targeted to the analysis of characteristics of knowledge expression in economy and to the construction of structure of KBE expression. This allows understanding the mechanism of functioning of knowledge economy. The authors highlight the possibility to assess the penetration level of KBE which could manifest itself trough the exist...

  5. Knowledge-based utility

    International Nuclear Information System (INIS)

    Chwalowski, M.

    1997-01-01

    This presentation provides industry examples of successful marketing practices by companies facing deregulation and competition. The common thread through the examples is that long term survival of today's utility structure is dependent on the strategic role of knowledge. As opposed to regulated monopolies which usually own huge physical assets and have very little intelligence about their customers, unregulated enterprises tend to be knowledge-based, characterized by higher market value than book value. A knowledge-based enterprise gathers data, creates information and develops knowledge by leveraging it as a competitive weapon. It institutionalizes human knowledge as a corporate asset for use over and over again by the use of databases, computer networks, patents, billing, collection and customer services (BCCS), branded interfaces and management capabilities. Activities to become knowledge-based such as replacing inventory/fixed assets with information about material usage to reduce expenditure and achieve more efficient operations, and by focusing on integration and value-adding delivery capabilities, were reviewed

  6. A distributed agent architecture for real-time knowledge-based systems: Real-time expert systems project, phase 1

    Science.gov (United States)

    Lee, S. Daniel

    1990-01-01

    We propose a distributed agent architecture (DAA) that can support a variety of paradigms based on both traditional real-time computing and artificial intelligence. DAA consists of distributed agents that are classified into two categories: reactive and cognitive. Reactive agents can be implemented directly in Ada to meet hard real-time requirements and be deployed on on-board embedded processors. A traditional real-time computing methodology under consideration is the rate monotonic theory that can guarantee schedulability based on analytical methods. AI techniques under consideration for reactive agents are approximate or anytime reasoning that can be implemented using Bayesian belief networks as in Guardian. Cognitive agents are traditional expert systems that can be implemented in ART-Ada to meet soft real-time requirements. During the initial design of cognitive agents, it is critical to consider the migration path that would allow initial deployment on ground-based workstations with eventual deployment on on-board processors. ART-Ada technology enables this migration while Lisp-based technologies make it difficult if not impossible. In addition to reactive and cognitive agents, a meta-level agent would be needed to coordinate multiple agents and to provide meta-level control.

  7. Knowledge based Entrepreneurship

    DEFF Research Database (Denmark)

    Heebøll, John

    This book is dedicated enterprising people with a technical or a scientific background who consider commercializing ideas and inventions within their field of expertise via a new business activity or a new company. It aims at distilling experiences from many successful and not so successful start......-up ventures from the Technical University of Denmark, 1988 – 2008 into practical, portable knowledge that can be used by future knowledge-based entrepreneurs to set up new companies efficiently or to stay away from it; to do what’s needed and avoid the pitfalls....

  8. Role of Knowledge Based Communities in Knowledge Process

    Directory of Open Access Journals (Sweden)

    Sebastian Ion CEPTUREANU

    2015-12-01

    Full Text Available In the new economy, knowledge is an essential component of economic and social systems. The organizational focus has to be on building knowledge-based management, development of human resource and building intellectual capital capabilities. Knowledge-based management is defined, at company level, by economic processes that emphasize creation, selling, buying, learning, storing, developing, sharing and protection of knowledge as a decisive condition for profit and long-term sustainability of the company. Hence, knowledge is, concurently, according to a majoritiy of specialists, raw material, capital, product and an essential input. Knowledge-based communities are one of the main constituent elements of a framework for knowledge based management. These are peer networks consisting of practitioners within an organization, supporting each other to perform better through the exchange and sharing of knowledge. Some large companies have contributed or supported the establishment of numerous communities of practice, some of which may have several thousand members. They operate in different ways, are of different sizes, have different areas of interest and addresses knowledge at different levels of its maturity. This article examines the role of knowledge-based communities from the perspective of knowledge based management, given that the arrangements for organizational learning, creating, sharing, use of knowledge within organizations become more heterogeneous and take forms more difficult to predict by managers and specialists.

  9. A knowledge base system for multidisciplinary model-based water management, Summit on Environmentel Modelling and Software, 3rd Biennial meeting of the International Environmental Modelling and Software Society, Burlington, Vermont, USA, July 9-12, 2006

    NARCIS (Netherlands)

    Kassahun, A.; Scholten, H.

    2006-01-01

    To improve the quality of multidisciplinary model-based water management studies and provide guidance on best practices, a user-friendly guidance and quality assurance knowledge-based system has been built within the EU funded HarmoniQuA project. The knowledge base system provides experts and

  10. AUTOCAT. Knowledge-based formal acquisition system according to INIS rules demonstrated by the example of physics core journals

    International Nuclear Information System (INIS)

    1986-07-01

    The AUTOCAT system is designed to perform the following two main tasks: - Orientation in the input data representing a given journal, or relevant contents thereof, with the main purpose of the identification process being to yield a task-specific interpretation of all relevant parts of text. - Transformation of the information units found in the input data into the AUTOCAT output format, in accordance with the INIS Cataloguing Rules. Since the processing structure largely depends on the (static) structure of journals, the representation of the object structure of the various physics core journals selected for the project is of great importance. Among the various representation concepts available, frames are particularly suited for use as an underlying data structure. So the frame concept of Minsky will be modified and enhanced to meet the specific requirements of the project. The basic information for data handling. i.e. identification and cataloguing, will be codified to rules and integrated into the frame concept. Realisation is planned to be in PROLOG. (orig./WB) [de

  11. Knowledge base rule partitioning design for CLIPS

    Science.gov (United States)

    Mainardi, Joseph D.; Szatkowski, G. P.

    1990-01-01

    This describes a knowledge base (KB) partitioning approach to solve the problem of real-time performance using the CLIPS AI shell when containing large numbers of rules and facts. This work is funded under the joint USAF/NASA Advanced Launch System (ALS) Program as applied research in expert systems to perform vehicle checkout for real-time controller and diagnostic monitoring tasks. The Expert System advanced development project (ADP-2302) main objective is to provide robust systems responding to new data frames of 0.1 to 1.0 second intervals. The intelligent system control must be performed within the specified real-time window, in order to meet the demands of the given application. Partitioning the KB reduces the complexity of the inferencing Rete net at any given time. This reduced complexity improves performance but without undo impacts during load and unload cycles. The second objective is to produce highly reliable intelligent systems. This requires simple and automated approaches to the KB verification & validation task. Partitioning the KB reduces rule interaction complexity overall. Reduced interaction simplifies the V&V testing necessary by focusing attention only on individual areas of interest. Many systems require a robustness that involves a large number of rules, most of which are mutually exclusive under different phases or conditions. The ideal solution is to control the knowledge base by loading rules that directly apply for that condition, while stripping out all rules and facts that are not used during that cycle. The practical approach is to cluster rules and facts into associated 'blocks'. A simple approach has been designed to control the addition and deletion of 'blocks' of rules and facts, while allowing real-time operations to run freely. Timing tests for real-time performance for specific machines under R/T operating systems have not been completed but are planned as part of the analysis process to validate the design.

  12. Knowledge Based Systems: A Critical Survey of Major Concepts, Issues, and Techniques. M.S. Thesis Final Report, 1 Jul. 1985 - 31 Dec. 1987

    Science.gov (United States)

    Dominick, Wayne D. (Editor); Kavi, Srinu

    1984-01-01

    This Working Paper Series entry presents a detailed survey of knowledge based systems. After being in a relatively dormant state for many years, only recently is Artificial Intelligence (AI) - that branch of computer science that attempts to have machines emulate intelligent behavior - accomplishing practical results. Most of these results can be attributed to the design and use of Knowledge-Based Systems, KBSs (or ecpert systems) - problem solving computer programs that can reach a level of performance comparable to that of a human expert in some specialized problem domain. These systems can act as a consultant for various requirements like medical diagnosis, military threat analysis, project risk assessment, etc. These systems possess knowledge to enable them to make intelligent desisions. They are, however, not meant to replace the human specialists in any particular domain. A critical survey of recent work in interactive KBSs is reported. A case study (MYCIN) of a KBS, a list of existing KBSs, and an introduction to the Japanese Fifth Generation Computer Project are provided as appendices. Finally, an extensive set of KBS-related references is provided at the end of the report.

  13. FluKB: A Knowledge-Based System for Influenza Vaccine Target Discovery and Analysis of the Immunological Properties of Influenza Viruses

    DEFF Research Database (Denmark)

    Simon, Christian; Kudahl, Ulrich Johan; Sun, Jing

    2015-01-01

    FluKB is a knowledge-based system focusing on data and analytical tools for influenza vaccine discovery. The main goal of FluKB is to provide access to curated influenza sequence and epitope data and enhance the analysis of influenza sequence diversity and the analysis of targets of immune...... responses. FluKB consists of more than 400,000 influenza protein sequences, known epitope data (357 verified T-cell epitopes, 685 HLA binders, and 16 naturally processed MHC ligands), and a collection of 28 influenza antibodies and their structurally defined B-cell epitopes. FluKB was built using amodular...

  14. Understanding images using knowledge based approach

    International Nuclear Information System (INIS)

    Tascini, G.

    1985-01-01

    This paper presents an approach to image understanding focusing on low level image processing and proposes a rule-based approach as part of larger knowledge-based system. The general system has a yerarchical structure that comprises several knowledge-based layers. The main idea is to confine at the lower level the domain independent knowledge and to reserve the higher levels for the domain dependent knowledge, that is for the interpretation

  15. A Knowledge-Based Consultant for Financial Marketing

    OpenAIRE

    Kastner, John; Apte, Chidanand; Griesmer, James

    1986-01-01

    This article describes an effort to develop a knowledge-based financial marketing consultant system. Financial marketing is an excellent vehicle for both research and application in artificial intelligence (AI). This domain differs from the great majority of previous expert system domains in that there are no well-defined answers (in traditional sense); the goal here is to obtain satisfactory arguments to support the conclusions made. A large OPS5-based system was implemented as an initial pr...

  16. Large Superconducting Magnet Systems

    CERN Document Server

    Védrine, P.

    2014-07-17

    The increase of energy in accelerators over the past decades has led to the design of superconducting magnets for both accelerators and the associated detectors. The use of Nb−Ti superconducting materials allows an increase in the dipole field by up to 10 T compared with the maximum field of 2 T in a conventional magnet. The field bending of the particles in the detectors and generated by the magnets can also be increased. New materials, such as Nb$_{3}$Sn and high temperature superconductor (HTS) conductors, can open the way to higher fields, in the range 13–20 T. The latest generations of fusion machines producing hot plasma also use large superconducting magnet systems.

  17. Large Superconducting Magnet Systems

    Energy Technology Data Exchange (ETDEWEB)

    Védrine, P [Saclay (France)

    2014-07-01

    The increase of energy in accelerators over the past decades has led to the design of superconducting magnets for both accelerators and the associated detectors. The use of Nb−Ti superconducting materials allows an increase in the dipole field by up to 10 T compared with the maximum field of 2 T in a conventional magnet. The field bending of the particles in the detectors and generated by the magnets can also be increased. New materials, such as Nb3Sn and high temperature superconductor (HTS) conductors, can open the way to higher fields, in the range 13–20 T. The latest generations of fusion machines producing hot plasma also use large superconducting magnet systems.

  18. Parallel implementation and evaluation of motion estimation system algorithms on a distributed memory multiprocessor using knowledge based mappings

    Science.gov (United States)

    Choudhary, Alok Nidhi; Leung, Mun K.; Huang, Thomas S.; Patel, Janak H.

    1989-01-01

    Several techniques to perform static and dynamic load balancing techniques for vision systems are presented. These techniques are novel in the sense that they capture the computational requirements of a task by examining the data when it is produced. Furthermore, they can be applied to many vision systems because many algorithms in different systems are either the same, or have similar computational characteristics. These techniques are evaluated by applying them on a parallel implementation of the algorithms in a motion estimation system on a hypercube multiprocessor system. The motion estimation system consists of the following steps: (1) extraction of features; (2) stereo match of images in one time instant; (3) time match of images from different time instants; (4) stereo match to compute final unambiguous points; and (5) computation of motion parameters. It is shown that the performance gains when these data decomposition and load balancing techniques are used are significant and the overhead of using these techniques is minimal.

  19. Knowledge-based geographic information systems on the Macintosh computer: a component of the GypsES project

    Science.gov (United States)

    Gregory Elmes; Thomas Millette; Charles B. Yuill

    1991-01-01

    GypsES, a decision-support and expert system for the management of Gypsy Moth addresses five related research problems in a modular, computer-based project. The modules are hazard rating, monitoring, prediction, treatment decision and treatment implementation. One common component is a geographic information system designed to function intelligently. We refer to this...

  20. The knowledge base of journalism

    DEFF Research Database (Denmark)

    Svith, Flemming

    In this paper I propose the knowledge base as a fruitful way to apprehend journalism. With the claim that the majority of practice is anchored in knowledge – understood as 9 categories of rationales, forms and levels – this knowledge base appears as a contextual look at journalists’ knowledge......, and place. As an analytical framework, the knowledge base is limited to understand the practice of newspaper journalists, but, conversely, the knowledge base encompasses more general beginnings through the inclusion of overall structural relationships in the media and journalism and general theories...... on practice and knowledge. As the result of an abductive reasoning is a theory proposal, there is a need for more deductive approaches to test the validity of this knowledge base claim. It is thus relevant to investigate which rationales are included in the knowledge base of journalism, as the dimension does...

  1. Logically automorphically equivalent knowledge bases

    OpenAIRE

    Aladova, Elena; Plotkin, Tatjana

    2017-01-01

    Knowledge bases theory provide an important example of the field where applications of universal algebra and algebraic logic look very natural, and their interaction with practical problems arising in computer science might be very productive. In this paper we study the equivalence problem for knowledge bases. Our interest is to find out how the informational equivalence is related to the logical description of knowledge. Studying various equivalences of knowledge bases allows us to compare d...

  2. Investigation of the applicability of a functional programming model to fault-tolerant parallel processing for knowledge-based systems

    Science.gov (United States)

    Harper, Richard

    1989-01-01

    In a fault-tolerant parallel computer, a functional programming model can facilitate distributed checkpointing, error recovery, load balancing, and graceful degradation. Such a model has been implemented on the Draper Fault-Tolerant Parallel Processor (FTPP). When used in conjunction with the FTPP's fault detection and masking capabilities, this implementation results in a graceful degradation of system performance after faults. Three graceful degradation algorithms have been implemented and are presented. A user interface has been implemented which requires minimal cognitive overhead by the application programmer, masking such complexities as the system's redundancy, distributed nature, variable complement of processing resources, load balancing, fault occurrence and recovery. This user interface is described and its use demonstrated. The applicability of the functional programming style to the Activation Framework, a paradigm for intelligent systems, is then briefly described.

  3. Public Health System Research in Public Health Emergency Preparedness in the United States (2009-2015): Actionable Knowledge Base.

    Science.gov (United States)

    Savoia, Elena; Lin, Leesa; Bernard, Dottie; Klein, Noah; James, Lyndon P; Guicciardi, Stefano

    2017-09-01

    In 2008, the Institute of Medicine released a letter report identifying 4 research priority areas for public health emergency preparedness in public health system research: (1) enhancing the usefulness of training, (2) improving timely emergency communications, (3) creating and maintaining sustainable response systems, and (4) generating effectiveness criteria and metrics. To (1) identify and characterize public health system research in public health emergency preparedness produced in the United States from 2009 to 2015, (2) synthesize research findings and assess the level of confidence in these findings, and (3) describe the evolution of knowledge production in public health emergency preparedness system research. Search Methods and Selection Criteria. We reviewed and included the titles and abstracts of 1584 articles derived from MEDLINE, EMBASE, and gray literature databases that focused on the organizational or financial aspects of public health emergency preparedness activities and were grounded on empirical studies. We included 156 articles. We appraised the quality of the studies according to the study design. We identified themes during article analysis and summarized overall findings by theme. We determined level of confidence in the findings with the GRADE-CERQual tool. Thirty-one studies provided evidence on how to enhance the usefulness of training. Results demonstrated the utility of drills and exercises to enhance decision-making capabilities and coordination across organizations, the benefit of cross-sector partnerships for successfully implementing training activities, and the value of integrating evaluation methods to support training improvement efforts. Thirty-six studies provided evidence on how to improve timely communications. Results supported the use of communication strategies that address differences in access to information, knowledge, attitudes, and practices across segments of the population as well as evidence on specific

  4. Knowledge-Based Energy Damage Model for Evaluating Industrialised Building Systems (IBS Occupational Health and Safety (OHS Risk

    Directory of Open Access Journals (Sweden)

    Abas Nor Haslinda

    2016-01-01

    Full Text Available Malaysia’s construction industry has been long considered hazardous, owing to its poor health and safety record. It is proposed that one of the ways to improve safety and health in the construction industry is through the implementation of ‘off-site’ systems, commonly termed ‘industrialised building systems (IBS’ in Malaysia. This is deemed safer based on the risk concept of reduced exposure, brought about by the reduction in onsite workers; however, no method yet exists for determining the relative safety of various construction methods, including IBS. This study presents a comparative evaluation of the occupational health and safety (OHS risk presented by different construction approaches, namely IBS and traditional methods. The evaluation involved developing a model based on the concept of ‘argumentation theory’, which helps construction designers integrate the management of OHS risk into the design process. In addition, an ‘energy damage model’ was used as an underpinning framework. Development of the model was achieved through three phases, namely Phase I – knowledge acquisitaion, Phase II – argument trees mapping, and Phase III – validation of the model. The research revealed that different approaches/methods of construction projects carried a different level of energy damage, depending on how the activities were carried out. A study of the way in which the risks change from one construction process to another shows that there is a difference in the profile of OHS risk between IBS construction and traditional methods.Therefore, whether the option is an IBS or traditional approach, the fundamental idea of the model is to motivate construction designers or decision-makers to address safety in the design process and encourage them to examine carefully the probable OHS risk variables surrounding an action, thus preventing accidents in construction.

  5. Deviation Management: Key Management Subsystem Driver of Knowledge-Based Continuous Improvement in the Henry Ford Production System.

    Science.gov (United States)

    Zarbo, Richard J; Copeland, Jacqueline R; Varney, Ruan C

    2017-10-01

    To develop a business subsystem fulfilling International Organization for Standardization 15189 nonconformance management regulatory standard, facilitating employee engagement in problem identification and resolution to effect quality improvement and risk mitigation. From 2012 to 2016, the integrated laboratories of the Henry Ford Health System used a quality technical team to develop and improve a management subsystem designed to identify, track, trend, and summarize nonconformances based on frequency, risk, and root cause for elimination at the level of the work. Programmatic improvements and training resulted in markedly increased documentation culminating in 71,641 deviations in 2016 classified by a taxonomy of 281 defect types into preanalytic (74.8%), analytic (23.6%), and postanalytic (1.6%) testing phases. The top 10 deviations accounted for 55,843 (78%) of the total. Deviation management is a key subsystem of managers' standard work whereby knowledge of nonconformities assists in directing corrective actions and continuous improvements that promote consistent execution and higher levels of performance. © American Society for Clinical Pathology, 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

  6. Modeling Guru: Knowledge Base for NASA Modelers

    Science.gov (United States)

    Seablom, M. S.; Wojcik, G. S.; van Aartsen, B. H.

    2009-05-01

    Modeling Guru is an on-line knowledge-sharing resource for anyone involved with or interested in NASA's scientific models or High End Computing (HEC) systems. Developed and maintained by the NASA's Software Integration and Visualization Office (SIVO) and the NASA Center for Computational Sciences (NCCS), Modeling Guru's combined forums and knowledge base for research and collaboration is becoming a repository for the accumulated expertise of NASA's scientific modeling and HEC communities. All NASA modelers and associates are encouraged to participate and provide knowledge about the models and systems so that other users may benefit from their experience. Modeling Guru is divided into a hierarchy of communities, each with its own set forums and knowledge base documents. Current modeling communities include those for space science, land and atmospheric dynamics, atmospheric chemistry, and oceanography. In addition, there are communities focused on NCCS systems, HEC tools and libraries, and programming and scripting languages. Anyone may view most of the content on Modeling Guru (available at http://modelingguru.nasa.gov/), but you must log in to post messages and subscribe to community postings. The site offers a full range of "Web 2.0" features, including discussion forums, "wiki" document generation, document uploading, RSS feeds, search tools, blogs, email notification, and "breadcrumb" links. A discussion (a.k.a. forum "thread") is used to post comments, solicit feedback, or ask questions. If marked as a question, SIVO will monitor the thread, and normally respond within a day. Discussions can include embedded images, tables, and formatting through the use of the Rich Text Editor. Also, the user can add "Tags" to their thread to facilitate later searches. The "knowledge base" is comprised of documents that are used to capture and share expertise with others. The default "wiki" document lets users edit within the browser so others can easily collaborate on the

  7. Knowledge-Based Replanning System.

    Science.gov (United States)

    1987-05-01

    appeared to be making significant progress. Theoretical linguistics pulled itself together in the late 1970s and early 1980s, and more and more Al...Richard, "Achievingv Several GoalIS SimuL1tan1C0ulvj\\. Artiti:1al 1111CIic~ Center, Technical Note 107, SRI Project 2245, JlyI 19-5. - 77 - ~ k I

  8. VICKEY: Mining Conditional Keys on Knowledge Bases

    DEFF Research Database (Denmark)

    Symeonidou, Danai; Prado, Luis Antonio Galarraga Del; Pernelle, Nathalie

    2017-01-01

    A conditional key is a key constraint that is valid in only a part of the data. In this paper, we show how such keys can be mined automatically on large knowledge bases (KBs). For this, we combine techniques from key mining with techniques from rule mining. We show that our method can scale to KBs...

  9. Information modelling and knowledge bases XXV

    CERN Document Server

    Tokuda, T; Jaakkola, H; Yoshida, N

    2014-01-01

    Because of our ever increasing use of and reliance on technology and information systems, information modelling and knowledge bases continue to be important topics in those academic communities concerned with data handling and computer science. As the information itself becomes more complex, so do the levels of abstraction and the databases themselves. This book is part of the series Information Modelling and Knowledge Bases, which concentrates on a variety of themes in the important domains of conceptual modeling, design and specification of information systems, multimedia information modelin

  10. SU-G-TeP4-14: Quality Control of Treatment Planning Using Knowledge-Based Planning Across a System of Radiation Oncology Practices

    Energy Technology Data Exchange (ETDEWEB)

    Masi, K; Ditman, M; Marsh, R; Archer, P; Matuszak, M [University of Michigan, Ann Arbor, MI (United States); Dai, J [Alpena Cancer Center, Alpena, MI (United States); Huberts, M [McLaren Greater Lansing, Lansing, MI (United States); Khadija, M [Metro Health, Wyoming, MI (United States); Tatro, D [Allegiance Health, Jackson, MI (United States)

    2016-06-15

    Purpose: There is potentially a wide variation in plan quality for a certain disease site, even for clinics located in the same system of hospitals. We have used a prostate-specific knowledge-based planning (KBP) model as a quality control tool to investigate the variation in prostate treatment planning across a network of affiliated radiation oncology departments. Methods: A previously created KBP model was applied to 10 patients each from 4 community-based clinics (Clinics A, B, C, and D). The KBP model was developed using RapidPlan (Eclipse v13.5, Varian Medical Systems) from 60 prostate/prostate bed IMRT plans that were originally planned using an in-house treatment planning system at the central institution of the community-based clinics. The dosimetric plan quality (target coverage and normal-tissue sparing) of each model-generated plan was compared to the respective clinically-used plan. Each community-based clinic utilized the same planning goals to develop the clinically-used plans that were used at the main institution. Results: Across all 4 clinics, the model-generated plans decreased the mean dose to the rectum by varying amounts (on average, 12.5, 2.6, 4.5, and 2.7 Gy for Clinics A, B, C, and D, respectively). The mean dose to the bladder also decreased with the model-generated plans (5.4, 2.3, 3.0, and 4.1 Gy, respectively). The KBP model also identified that target coverage (D95%) improvements were possible for for Clinics A, B, and D (0.12, 1.65, and 2.75%) while target coverage decreased by 0.72% for Clinic C, demonstrating potentially different trade-offs made in clinical plans at different institutions. Conclusion: Quality control of dosimetric plan quality across a system of radiation oncology practices is possible with knowledge-based planning. By using a quality KBP model, smaller community-based clinics can potentially identify the areas of their treatment plans that may be improved, whether it be in normal-tissue sparing or improved target

  11. SU-G-TeP4-14: Quality Control of Treatment Planning Using Knowledge-Based Planning Across a System of Radiation Oncology Practices

    International Nuclear Information System (INIS)

    Masi, K; Ditman, M; Marsh, R; Archer, P; Matuszak, M; Dai, J; Huberts, M; Khadija, M; Tatro, D

    2016-01-01

    Purpose: There is potentially a wide variation in plan quality for a certain disease site, even for clinics located in the same system of hospitals. We have used a prostate-specific knowledge-based planning (KBP) model as a quality control tool to investigate the variation in prostate treatment planning across a network of affiliated radiation oncology departments. Methods: A previously created KBP model was applied to 10 patients each from 4 community-based clinics (Clinics A, B, C, and D). The KBP model was developed using RapidPlan (Eclipse v13.5, Varian Medical Systems) from 60 prostate/prostate bed IMRT plans that were originally planned using an in-house treatment planning system at the central institution of the community-based clinics. The dosimetric plan quality (target coverage and normal-tissue sparing) of each model-generated plan was compared to the respective clinically-used plan. Each community-based clinic utilized the same planning goals to develop the clinically-used plans that were used at the main institution. Results: Across all 4 clinics, the model-generated plans decreased the mean dose to the rectum by varying amounts (on average, 12.5, 2.6, 4.5, and 2.7 Gy for Clinics A, B, C, and D, respectively). The mean dose to the bladder also decreased with the model-generated plans (5.4, 2.3, 3.0, and 4.1 Gy, respectively). The KBP model also identified that target coverage (D95%) improvements were possible for for Clinics A, B, and D (0.12, 1.65, and 2.75%) while target coverage decreased by 0.72% for Clinic C, demonstrating potentially different trade-offs made in clinical plans at different institutions. Conclusion: Quality control of dosimetric plan quality across a system of radiation oncology practices is possible with knowledge-based planning. By using a quality KBP model, smaller community-based clinics can potentially identify the areas of their treatment plans that may be improved, whether it be in normal-tissue sparing or improved target

  12. Tiger: knowledge based gas turbine condition monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Trave-Massuyes, L. [Centre National de la Recherche Scientifique (CNRS), 31 - Toulouse (France); Quevedo, J. [University of Catalonia, (Spain); Milne, R.; Nicol, Ch.

    1995-12-31

    Exxon petrochemical plant in Scotland requires continuous ethylene supply from offshore site in North Sea. The supply is achieved thanks to compressors driven by a 28 MW gas turbine, whose monitoring is of major importance. The TIGER fault diagnostic system is a knowledge base system containing a prediction model. (D.L.) 11 refs.

  13. Tiger: knowledge based gas turbine condition monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Trave-Massuyes, L [Centre National de la Recherche Scientifique (CNRS), 31 - Toulouse (France); Quevedo, J [University of Catalonia, (Spain); Milne, R; Nicol, Ch

    1996-12-31

    Exxon petrochemical plant in Scotland requires continuous ethylene supply from offshore site in North Sea. The supply is achieved thanks to compressors driven by a 28 MW gas turbine, whose monitoring is of major importance. The TIGER fault diagnostic system is a knowledge base system containing a prediction model. (D.L.) 11 refs.

  14. A knowledge-based operator advisor system for integration of fault detection, control, and diagnosis to enhance the safe and reliable operation of nuclear power plants

    International Nuclear Information System (INIS)

    Bhatnagar, R.

    1989-01-01

    A Knowledged-Based Operator Advisor System has been developed for enhancing the complex task of maintaining safe and reliable operation of nuclear power plants. The operator's activities have been organized into the four tasks of data interpretation for abstracting high level information from sensor data, plant state monitoring for identification of faults, plan execution for controlling the faults, and diagnosis for determination of root causes of faults. The Operator Advisor System is capable of identifying the abnormal functioning of the plant in terms of: (1) deviations from normality, (2) pre-enumerated abnormal events, and (3) safety threats. The classification of abnormal functioning into the three categories of deviations from normality, abnormal events, and safety threats allows the detection of faults at three levels of: (1) developing faults, (2) developed faults, and (3) safety threatening faults. After the identification of abnormal functioning the system will identify the procedures to be executed to mitigate the consequences of abnormal functioning and will help the operator by displaying the procedure steps and monitoring the success of actions taken. The system also is capable of diagnosing the root causes of abnormal functioning. The identification, and diagnosis of root causes of abnormal functioning are done in parallel to the task of procedure execution, allowing the detection of more critical safety threats while executing procedures to control abnormal events

  15. Knowledge-based scheduling of arrival aircraft

    Science.gov (United States)

    Krzeczowski, K.; Davis, T.; Erzberger, H.; Lev-Ram, I.; Bergh, C.

    1995-01-01

    A knowledge-based method for scheduling arrival aircraft in the terminal area has been implemented and tested in real-time simulation. The scheduling system automatically sequences, assigns landing times, and assigns runways to arrival aircraft by utilizing continuous updates of aircraft radar data and controller inputs. The scheduling algorithms is driven by a knowledge base which was obtained in over two thousand hours of controller-in-the-loop real-time simulation. The knowledge base contains a series of hierarchical 'rules' and decision logic that examines both performance criteria, such as delay reduction, as well as workload reduction criteria, such as conflict avoidance. The objective of the algorithms is to devise an efficient plan to land the aircraft in a manner acceptable to the air traffic controllers. This paper will describe the scheduling algorithms, give examples of their use, and present data regarding their potential benefits to the air traffic system.

  16. Knowledge-based Telecom Industry

    OpenAIRE

    Vinje, Villeman; Nordkvelde, Marius

    2011-01-01

    BI Norwegian School of Management is conducting a national research project entitled “A knowledge-based Norway”. Thirteen major knowledge-based industries in Norway are being analyzed under the auspices of the project. This study assesses the underlying properties of a global knowledge hub to examine the extent to which the Norwegian telecom industry – which encompasses all telecom firms located in Norway regardless of ownership – constitutes a global knowledge hub. It commences with a ge...

  17. Validation of a Crowdsourcing Methodology for Developing a Knowledge Base of Related Problem-Medication Pairs.

    Science.gov (United States)

    McCoy, A B; Wright, A; Krousel-Wood, M; Thomas, E J; McCoy, J A; Sittig, D F

    2015-01-01

    Clinical knowledge bases of problem-medication pairs are necessary for many informatics solutions that improve patient safety, such as clinical summarization. However, developing these knowledge bases can be challenging. We sought to validate a previously developed crowdsourcing approach for generating a knowledge base of problem-medication pairs in a large, non-university health care system with a widely used, commercially available electronic health record. We first retrieved medications and problems entered in the electronic health record by clinicians during routine care during a six month study period. Following the previously published approach, we calculated the link frequency and link ratio for each pair then identified a threshold cutoff for estimated problem-medication pair appropriateness through clinician review; problem-medication pairs meeting the threshold were included in the resulting knowledge base. We selected 50 medications and their gold standard indications to compare the resulting knowledge base to the pilot knowledge base developed previously and determine its recall and precision. The resulting knowledge base contained 26,912 pairs, had a recall of 62.3% and a precision of 87.5%, and outperformed the pilot knowledge base containing 11,167 pairs from the previous study, which had a recall of 46.9% and a precision of 83.3%. We validated the crowdsourcing approach for generating a knowledge base of problem-medication pairs in a large non-university health care system with a widely used, commercially available electronic health record, indicating that the approach may be generalizable across healthcare settings and clinical systems. Further research is necessary to better evaluate the knowledge, to compare crowdsourcing with other approaches, and to evaluate if incorporating the knowledge into electronic health records improves patient outcomes.

  18. Validation of a Crowdsourcing Methodology for Developing a Knowledge Base of Related Problem-Medication Pairs

    Science.gov (United States)

    Wright, A.; Krousel-Wood, M.; Thomas, E. J.; McCoy, J. A.; Sittig, D. F.

    2015-01-01

    Summary Background Clinical knowledge bases of problem-medication pairs are necessary for many informatics solutions that improve patient safety, such as clinical summarization. However, developing these knowledge bases can be challenging. Objective We sought to validate a previously developed crowdsourcing approach for generating a knowledge base of problem-medication pairs in a large, non-university health care system with a widely used, commercially available electronic health record. Methods We first retrieved medications and problems entered in the electronic health record by clinicians during routine care during a six month study period. Following the previously published approach, we calculated the link frequency and link ratio for each pair then identified a threshold cutoff for estimated problem-medication pair appropriateness through clinician review; problem-medication pairs meeting the threshold were included in the resulting knowledge base. We selected 50 medications and their gold standard indications to compare the resulting knowledge base to the pilot knowledge base developed previously and determine its recall and precision. Results The resulting knowledge base contained 26,912 pairs, had a recall of 62.3% and a precision of 87.5%, and outperformed the pilot knowledge base containing 11,167 pairs from the previous study, which had a recall of 46.9% and a precision of 83.3%. Conclusions We validated the crowdsourcing approach for generating a knowledge base of problem-medication pairs in a large non-university health care system with a widely used, commercially available electronic health record, indicating that the approach may be generalizable across healthcare settings and clinical systems. Further research is necessary to better evaluate the knowledge, to compare crowdsourcing with other approaches, and to evaluate if incorporating the knowledge into electronic health records improves patient outcomes. PMID:26171079

  19. Application of knowledge based software to industrial automation in Japan

    International Nuclear Information System (INIS)

    Matsumoto, Yoshihiro

    1985-01-01

    In Japan, large industrial undertakings such as electric utilities or steel works are making first steps towards knowledge engineering, testing the applicability of knowledge based software to industrial automation. The goal is to achieve more intelligent, computer-aided assistance for the personnel and thus to enhance safety, reliability, and maintenance efficiency in large industrial plants. The article presents various examples showing advantages and draw-backs of such systems, and potential applications among others in nuclear or fossil fueled power plants or in electricity supply control systems. (orig./HP) [de

  20. A methodology for developing high-integrity knowledge base using document analysis and ECPN matrix analysis with backward simulation

    International Nuclear Information System (INIS)

    Park, Joo Hyun

    1999-02-01

    When transitions occur in large systems such as nuclear power plants (NPPs) or industrial process plants, it is often difficult to diagnose them. Various computer-based operator-aiding systems have been developed in order to help operators diagnose the transitions of the plants. In procedures for developing knowledge base system like operator-aiding systems, the knowledge acquisition and the knowledge base verification are core activities. This dissertation describes a knowledge acquisition method and a knowledge base verification method for developing high-integrity knowledge base system of NPP expert systems. The knowledge acquisition is one of the most difficult and time-consuming activities in developing knowledge base systems. There are two kinds of knowledge acquisition methods in view of knowledge sources. One is an acquisition method from human expert. This method, however, is not adequate to acquire the knowledge of NPP expert systems because the number of experts is not sufficient. In this work, we propose a novel knowledge acquisition method through documents analysis. The knowledge base can be built correctly, rapidly, and partially automatically through this method. This method is especially useful when it is difficult to find domain experts. Reliability of knowledge base systems depends on the quality of their knowledge base. Petri Net has been used to verify knowledge bases due to their formal outputs. The methods using Petri Net however are difficult to apply to large and complex knowledge bases because the Net becomes very large and complex. Also, with Petri Net, it is difficult to find proper input patterns that make anomalies occur. In order to overcome this difficulty, in this work, the anomaly candidates detection methods are developed based on Extended CPN (ECPN) matrix analysis. This work also defines the backward simulation of CPN to find compact input patterns for anomaly detection, which starts simulation from the anomaly candidates

  1. Acquisition and representation of knowledge related to crack formation in power plant components - practical implementation in a knowledge-based system (ESR)

    International Nuclear Information System (INIS)

    Jovanovic, A.; Kautz, H.R.; Raepke, H.; Witte, M. de

    1992-01-01

    The damage analysis in general and analysis of crack formation in particular, must rely on a careful balance of generic principles (e.g. generic knowledge about damage mechanisms) and information regarding the analyzed component (e.g. operating history, manufacturing data or construction records). Use of non-standard and/or advanced approaches (for damage parameters, monitoring techniques, etc.) can, on the one hand, enhance the solution by making it more comprehensive, but, on the other hand, it can also make the final decision more complex. In both cases, at the current state of practice, only heuristic knowledge can assure that all the important factors be properly considered. The examples shown in the paper illustrate the feasibility of obtaining useful interim results, which, through a continued long-term effort invested in knowledge acquisition and representation, and its integration into a knowledge-based system allow to achieve progressively the goals formulated at the beginning of the expert system for remaining life assessment project. (orig./DG)

  2. A Knowledge Based Approach to VLSI CAD

    Science.gov (United States)

    1983-09-01

    Avail-and/or Dist ISpecial L| OI. SEICURITY CLASIIrCATION OP THIS IPA.lErllm S Daene." A KNOwLEDE BASED APPROACH TO VLSI CAD’ Louis L Steinberg and...major issues lies in building up and managing the knowledge base of oesign expertise. We expect that, as with many recent expert systems, in order to

  3. Knowledge based diagnostics in nuclear power plants

    International Nuclear Information System (INIS)

    Baldeweg, F.; Fiedler, U.; Weiss, F.P.; Werner, M.

    1987-01-01

    In this paper a special process diagnostic system (PDS) is presented. It must be seen as the result of a long term work on computerized process surveillance and control; it includes a model based system for noise analysis of mechanical vibrations, which has recently been enhanced by using of knowledge based technique (expert systems). The paper discusses the process diagnostic frame concept and emphasize the vibration analysis expert system

  4. Echocardiographic knowledge-based reconstruction for quantification of the systemic right ventricle in young adults with repaired D-transposition of great arteries.

    Science.gov (United States)

    Kutty, Shelby; Li, Ling; Polak, Amanda; Gribben, Paul; Danford, David A

    2012-03-15

    The systemic right ventricle (RV) in congenital heart disease is susceptible to progressive dilation and dysfunction. A 2-dimensional echocardiographic means for serial monitoring of the RV would be of great value in this clinical setting. We used 2-dimensional echocardiography with knowledge-based reconstruction (2DE-KBR) for evaluation of systemic RV. Patients with d-transposition of great arteries repaired with an atrial switch and without implanted pacemakers were prospectively recruited for same-day 2DE-KBR and cardiac magnetic resonance (CMR) imaging. RV images were acquired in various 2-dimensional imaging planes using a 3-dimensional space-localizing device attached to the imaging transducer and 3-dimensional reconstruction was performed. RV end-diastolic volume, end-systolic volume, and ejection fraction (EF) were calculated and compared to volumetric CMR analysis. Fifteen patients (7 women, 8 men, 24 ± 7 years old, weight 67 ± 12 kg) were studied. There was good agreement of 2DE-KBR and CMR measurements. Mean RV end-diastolic volume was 221 ± 39 ml with 2DE-KBR and 231 ± 35 ml with CMR (r = 0.80); mean end-systolic volume was 129 ± 35 ml with KBR and 132 ± 30 ml with CMR (r = 0.82), and EF was 42 ± 10% with KBR and 43 ± 7% with CMR (r = 0.86). For 2DE-KBR mean interobserver variabilities were 4.6%, 2.6%, and 4.3%; intraobserver variabilities were 3.2%, 3.1%, and 2.3%, respectively, for end-diastolic volume, end-systolic volume, and EF. In conclusion, this study demonstrates the clinical feasibility of quantifying systemic RV volumes and function using 2DE-KBR in adolescents and young adults with repaired d-transposition of great arteries and good agreement of measurements with CMR. Copyright © 2012 Elsevier Inc. All rights reserved.

  5. Problem-Oriented Corporate Knowledge Base Models on the Case-Based Reasoning Approach Basis

    Science.gov (United States)

    Gluhih, I. N.; Akhmadulin, R. K.

    2017-07-01

    One of the urgent directions of efficiency enhancement of production processes and enterprises activities management is creation and use of corporate knowledge bases. The article suggests a concept of problem-oriented corporate knowledge bases (PO CKB), in which knowledge is arranged around possible problem situations and represents a tool for making and implementing decisions in such situations. For knowledge representation in PO CKB a case-based reasoning approach is encouraged to use. Under this approach, the content of a case as a knowledge base component has been defined; based on the situation tree a PO CKB knowledge model has been developed, in which the knowledge about typical situations as well as specific examples of situations and solutions have been represented. A generalized problem-oriented corporate knowledge base structural chart and possible modes of its operation have been suggested. The obtained models allow creating and using corporate knowledge bases for support of decision making and implementing, training, staff skill upgrading and analysis of the decisions taken. The universal interpretation of terms “situation” and “solution” adopted in the work allows using the suggested models to develop problem-oriented corporate knowledge bases in different subject domains. It has been suggested to use the developed models for making corporate knowledge bases of the enterprises that operate engineer systems and networks at large production facilities.

  6. Exchanging Description Logic Knowledge Bases

    NARCIS (Netherlands)

    Arenas, M.; Botoeva, E.; Calvanese, D.; Ryzhikov, V.; Sherkhonov, E.

    2012-01-01

    In this paper, we study the problem of exchanging knowledge between a source and a target knowledge base (KB), connected through mappings. Differently from the traditional database exchange setting, which considers only the exchange of data, we are interested in exchanging implicit knowledge. As

  7. Machine intelligence and knowledge bases

    Energy Technology Data Exchange (ETDEWEB)

    Furukawa, K

    1981-09-01

    The basic functions necessary in machine intelligence are a knowledge base and a logic programming language such as PROLOG using deductive reasoning. Recently inductive reasoning based on meta knowledge and default reasoning have been developed. The creative thought model of Lenit is reviewed and the concept of knowledge engineering is introduced. 17 references.

  8. WE-DE-BRA-01: SCIENCE COUNCIL JUNIOR INVESTIGATOR COMPETITION WINNER: Acceleration of a Limited-Angle Intrafraction Verification (LIVE) System Using Adaptive Prior Knowledge Based Image Estimation

    International Nuclear Information System (INIS)

    Zhang, Y; Yin, F; Ren, L; Zhang, Y

    2016-01-01

    Purpose: To develop an adaptive prior knowledge based image estimation method to reduce the scan angle needed in the LIVE system to reconstruct 4D-CBCT for intrafraction verification. Methods: The LIVE system has been previously proposed to reconstructs 4D volumetric images on-the-fly during arc treatment for intrafraction target verification and dose calculation. This system uses limited-angle beam’s eye view (BEV) MV cine images acquired from the treatment beam together with the orthogonally acquired limited-angle kV projections to reconstruct 4D-CBCT images for target verification during treatment. In this study, we developed an adaptive constrained free-form deformation reconstruction technique in LIVE to further reduce the scanning angle needed to reconstruct the CBCT images. This technique uses free form deformation with energy minimization to deform prior images to estimate 4D-CBCT based on projections acquired in limited angle (orthogonal 6°) during the treatment. Note that the prior images are adaptively updated using the latest CBCT images reconstructed by LIVE during treatment to utilize the continuity of patient motion.The 4D digital extended-cardiac-torso (XCAT) phantom was used to evaluate the efficacy of this technique with LIVE system. A lung patient was simulated with different scenario, including baseline drifts, amplitude change and phase shift. Limited-angle orthogonal kV and beam’s eye view (BEV) MV projections were generated for each scenario. The CBCT reconstructed by these projections were compared with the ground-truth generated in XCAT.Volume-percentage-difference (VPD) and center-of-mass-shift (COMS) were calculated between the reconstructed and the ground-truth tumors to evaluate the reconstruction accuracy. Results: Using orthogonal-view of 6° kV and BEV- MV projections, the VPD/COMS values were 12.7±4.0%/0.7±0.5 mm, 13.0±5.1%/0.8±0.5 mm, and 11.4±5.4%/0.5±0.3 mm for the three scenarios, respectively. Conclusion: The

  9. WE-DE-BRA-01: SCIENCE COUNCIL JUNIOR INVESTIGATOR COMPETITION WINNER: Acceleration of a Limited-Angle Intrafraction Verification (LIVE) System Using Adaptive Prior Knowledge Based Image Estimation

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Y; Yin, F; Ren, L [Duke University Medical Center, Durham, NC (United States); Zhang, Y [UT Southwestern Medical Ctr at Dallas, Dallas, TX (United States)

    2016-06-15

    Purpose: To develop an adaptive prior knowledge based image estimation method to reduce the scan angle needed in the LIVE system to reconstruct 4D-CBCT for intrafraction verification. Methods: The LIVE system has been previously proposed to reconstructs 4D volumetric images on-the-fly during arc treatment for intrafraction target verification and dose calculation. This system uses limited-angle beam’s eye view (BEV) MV cine images acquired from the treatment beam together with the orthogonally acquired limited-angle kV projections to reconstruct 4D-CBCT images for target verification during treatment. In this study, we developed an adaptive constrained free-form deformation reconstruction technique in LIVE to further reduce the scanning angle needed to reconstruct the CBCT images. This technique uses free form deformation with energy minimization to deform prior images to estimate 4D-CBCT based on projections acquired in limited angle (orthogonal 6°) during the treatment. Note that the prior images are adaptively updated using the latest CBCT images reconstructed by LIVE during treatment to utilize the continuity of patient motion.The 4D digital extended-cardiac-torso (XCAT) phantom was used to evaluate the efficacy of this technique with LIVE system. A lung patient was simulated with different scenario, including baseline drifts, amplitude change and phase shift. Limited-angle orthogonal kV and beam’s eye view (BEV) MV projections were generated for each scenario. The CBCT reconstructed by these projections were compared with the ground-truth generated in XCAT.Volume-percentage-difference (VPD) and center-of-mass-shift (COMS) were calculated between the reconstructed and the ground-truth tumors to evaluate the reconstruction accuracy. Results: Using orthogonal-view of 6° kV and BEV- MV projections, the VPD/COMS values were 12.7±4.0%/0.7±0.5 mm, 13.0±5.1%/0.8±0.5 mm, and 11.4±5.4%/0.5±0.3 mm for the three scenarios, respectively. Conclusion: The

  10. Knowledge Based Understanding of Radiology Text

    OpenAIRE

    Ranum, David L.

    1988-01-01

    A data acquisition tool which will extract pertinent diagnostic information from radiology reports has been designed and implemented. Pertinent diagnostic information is defined as that clinical data which is used by the HELP medical expert system. The program uses a memory based semantic parsing technique to “understand” the text. Moreover, the memory structures and lexicon necessary to perform this action are automatically generated from the diagnostic knowledge base by using a special purp...

  11. Engineering large-scale agent-based systems with consensus

    Science.gov (United States)

    Bokma, A.; Slade, A.; Kerridge, S.; Johnson, K.

    1994-01-01

    The paper presents the consensus method for the development of large-scale agent-based systems. Systems can be developed as networks of knowledge based agents (KBA) which engage in a collaborative problem solving effort. The method provides a comprehensive and integrated approach to the development of this type of system. This includes a systematic analysis of user requirements as well as a structured approach to generating a system design which exhibits the desired functionality. There is a direct correspondence between system requirements and design components. The benefits of this approach are that requirements are traceable into design components and code thus facilitating verification. The use of the consensus method with two major test applications showed it to be successful and also provided valuable insight into problems typically associated with the development of large systems.

  12. Presentation planning using an integrated knowledge base

    Science.gov (United States)

    Arens, Yigal; Miller, Lawrence; Sondheimer, Norman

    1988-01-01

    A description is given of user interface research aimed at bringing together multiple input and output modes in a way that handles mixed mode input (commands, menus, forms, natural language), interacts with a diverse collection of underlying software utilities in a uniform way, and presents the results through a combination of output modes including natural language text, maps, charts and graphs. The system, Integrated Interfaces, derives much of its ability to interact uniformly with the user and the underlying services and to build its presentations, from the information present in a central knowledge base. This knowledge base integrates models of the application domain (Navy ships in the Pacific region, in the current demonstration version); the structure of visual displays and their graphical features; the underlying services (data bases and expert systems); and interface functions. The emphasis is on a presentation planner that uses the knowledge base to produce multi-modal output. There has been a flurry of recent work in user interface management systems. (Several recent examples are listed in the references). Existing work is characterized by an attempt to relieve the software designer of the burden of handcrafting an interface for each application. The work has generally focused on intelligently handling input. This paper deals with the other end of the pipeline - presentations.

  13. Optimization theory for large systems

    CERN Document Server

    Lasdon, Leon S

    2002-01-01

    Important text examines most significant algorithms for optimizing large systems and clarifying relations between optimization procedures. Much data appear as charts and graphs and will be highly valuable to readers in selecting a method and estimating computer time and cost in problem-solving. Initial chapter on linear and nonlinear programming presents all necessary background for subjects covered in rest of book. Second chapter illustrates how large-scale mathematical programs arise from real-world problems. Appendixes. List of Symbols.

  14. Highly Efficient Training, Refinement, and Validation of a Knowledge-based Planning Quality-Control System for Radiation Therapy Clinical Trials

    Energy Technology Data Exchange (ETDEWEB)

    Li, Nan; Carmona, Ruben [Department of Radiation Medicine and Applied Sciences, University of California San Diego, La Jolla, California (United States); Sirak, Igor; Kasaova, Linda [Department of Oncology and Radiotherapy, University Hospital, Hradec Kralove (Czech Republic); Followill, David [Department of Radiation Physics, University of Texas MD Anderson Cancer Center, Houston, Texas (United States); Michalski, Jeff; Bosch, Walter; Straube, William [Department of Radiation Oncology, Washington University in St Louis, St Louis, Missouri (United States); Mell, Loren K. [Department of Radiation Medicine and Applied Sciences, University of California San Diego, La Jolla, California (United States); Moore, Kevin L., E-mail: kevinmoore@ucsd.edu [Department of Radiation Medicine and Applied Sciences, University of California San Diego, La Jolla, California (United States)

    2017-01-01

    Purpose: To demonstrate an efficient method for training and validation of a knowledge-based planning (KBP) system as a radiation therapy clinical trial plan quality-control system. Methods and Materials: We analyzed 86 patients with stage IB through IVA cervical cancer treated with intensity modulated radiation therapy at 2 institutions according to the standards of the INTERTECC (International Evaluation of Radiotherapy Technology Effectiveness in Cervical Cancer, National Clinical Trials Network identifier: 01554397) protocol. The protocol used a planning target volume and 2 primary organs at risk: pelvic bone marrow (PBM) and bowel. Secondary organs at risk were rectum and bladder. Initial unfiltered dose-volume histogram (DVH) estimation models were trained using all 86 plans. Refined training sets were created by removing sub-optimal plans from the unfiltered sample, and DVH estimation models… and DVH estimation models were constructed by identifying 30 of 86 plans emphasizing PBM sparing (comparing protocol-specified dosimetric cutpoints V{sub 10} (percentage volume of PBM receiving at least 10 Gy dose) and V{sub 20} (percentage volume of PBM receiving at least 20 Gy dose) with unfiltered predictions) and another 30 of 86 plans emphasizing bowel sparing (comparing V{sub 40} (absolute volume of bowel receiving at least 40 Gy dose) and V{sub 45} (absolute volume of bowel receiving at least 45 Gy dose), 9 in common with the PBM set). To obtain deliverable KBP plans, refined models must inform patient-specific optimization objectives and/or priorities (an auto-planning “routine”). Four candidate routines emphasizing different tradeoffs were composed, and a script was developed to automatically re-plan multiple patients with each routine. After selection of the routine that best met protocol objectives in the 51-patient training sample (KBP{sub FINAL}), protocol-specific DVH metrics and normal tissue complication probability were compared for original

  15. Drug knowledge bases and their applications in biomedical informatics research.

    Science.gov (United States)

    Zhu, Yongjun; Elemento, Olivier; Pathak, Jyotishman; Wang, Fei

    2018-01-03

    Recent advances in biomedical research have generated a large volume of drug-related data. To effectively handle this flood of data, many initiatives have been taken to help researchers make good use of them. As the results of these initiatives, many drug knowledge bases have been constructed. They range from simple ones with specific focuses to comprehensive ones that contain information on almost every aspect of a drug. These curated drug knowledge bases have made significant contributions to the development of efficient and effective health information technologies for better health-care service delivery. Understanding and comparing existing drug knowledge bases and how they are applied in various biomedical studies will help us recognize the state of the art and design better knowledge bases in the future. In addition, researchers can get insights on novel applications of the drug knowledge bases through a review of successful use cases. In this study, we provide a review of existing popular drug knowledge bases and their applications in drug-related studies. We discuss challenges in constructing and using drug knowledge bases as well as future research directions toward a better ecosystem of drug knowledge bases. © The Author(s) 2018. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  16. VICKEY: Mining Conditional Keys on Knowledge Bases

    OpenAIRE

    Symeonidou , Danai; Galárraga , Luis; Pernelle , Nathalie; Saïs , Fatiha; Suchanek , Fabian

    2017-01-01

    International audience; A conditional key is a key constraint that is valid in only a part of the data. In this paper, we show how such keys can be mined automatically on large knowledge bases (KBs). For this, we combine techniques from key mining with techniques from rule mining. We show that our method can scale to KBs of millions of facts. We also show that the conditional keys we mine can improve the quality of entity linking by up to 47 percentage points.

  17. An operator support system for research reactor operations and fault diagnosis through a connectionist framework and PSA based knowledge based systems

    International Nuclear Information System (INIS)

    Varde, P.V.; Sankar, S.; Verma, A.K.

    1998-01-01

    During reactor upset/abnormal conditions, emphasis is placed on the plant operator's ability to quickly identify the problem and perform diagnosis and initiate recovery action to ensure the safety of the plant. However, the reliability of human action is adversely affected at the time of crisis due to time stress and psychological factors. The availability of operational aids capable of monitoring the status of the plant and quickly identifying the deviation from normal operation is expected to significantly improve the operator reliability. The development of operator support systems using probabilistic safety assessment (PSA) techniques and information is finding wide application in nuclear plant operation. Often it is observed that most of the applications use a rule-based approach for diagnosis as well as safety status/transient conditions monitoring. A more efficient approach using artificial neural networks for safety status/transient condition monitoring and rule-based systems for diagnosis and emergency procedure generation has been applied for the development of a prototype operator adviser (OPAD) system for a 100 MW(th) heavy water moderated, cooled and natural uranium fueled research reactor. The development objective of this system is to improve the reliability of operator action and hence the reactor safety at the time of crisis as well as in normal operation. In order to address safety objectives at various stages of development of OPAD, the PSA techniques and tools have been used for knowledge representation. It has been demonstrated, with recall tests on the artificial neural network, that it can efficiently identify the reactor status in real-time scenario. This paper discusses various issues related to the development of an operator support system in a comprehensive way, right from the study of safety objectives, to data collection, to implementation of such a system

  18. Towards Modeling False Memory With Computational Knowledge Bases.

    Science.gov (United States)

    Li, Justin; Kohanyi, Emma

    2017-01-01

    One challenge to creating realistic cognitive models of memory is the inability to account for the vast common-sense knowledge of human participants. Large computational knowledge bases such as WordNet and DBpedia may offer a solution to this problem but may pose other challenges. This paper explores some of these difficulties through a semantic network spreading activation model of the Deese-Roediger-McDermott false memory task. In three experiments, we show that these knowledge bases only capture a subset of human associations, while irrelevant information introduces noise and makes efficient modeling difficult. We conclude that the contents of these knowledge bases must be augmented and, more important, that the algorithms must be refined and optimized, before large knowledge bases can be widely used for cognitive modeling. Copyright © 2016 Cognitive Science Society, Inc.

  19. Refining Automatically Extracted Knowledge Bases Using Crowdsourcing

    OpenAIRE

    Li, Chunhua; Zhao, Pengpeng; Sheng, Victor S.; Xian, Xuefeng; Wu, Jian; Cui, Zhiming

    2017-01-01

    Machine-constructed knowledge bases often contain noisy and inaccurate facts. There exists significant work in developing automated algorithms for knowledge base refinement. Automated approaches improve the quality of knowledge bases but are far from perfect. In this paper, we leverage crowdsourcing to improve the quality of automatically extracted knowledge bases. As human labelling is costly, an important research challenge is how we can use limited human resources to maximize the quality i...

  20. Knowledge based management of technical specifications

    International Nuclear Information System (INIS)

    Fiedler, U.; Schalm, S.; Pranckeviciute, K.

    1992-01-01

    TechSPEX is a knowledge based advisory system for checking the status of a nuclear plant on compliance with the safety limits and the limiting conditions of operation. These prescripts for safe reactor operation exist as textual information. For the purpose of its operational use an explicit representation formalism is introduced. On this basis, various approaches of text retrieval are realized, condition based surveillance and control is supported too. Knowledge editing and verification modules ease the adaption to changing requirements. TechSPEX has been implemented in PROLOG. (author). 6 refs, 3 figs

  1. Combinando simulação e sistemas baseados em conhecimento para o projeto de sistemas avançados de manufatura Combining simulation and knowledge-based systems for advanced manufacturing system design

    Directory of Open Access Journals (Sweden)

    Denis Borenstein

    1998-08-01

    Full Text Available Este trabalho apresenta um sistema inteligente desenvolvido para verificar se uma determinada opção de projeto de um Sistema Avançado de Manufatura (SAM respeita os objetivos de projeto fixados pelo time de projetistas. Se um problema é encontrado, o sistema começa um ciclo de análise-diagnóstico-recomendação no sentido de diagnosticar a causa do problema, bem como, sugerir possíveis ações no sentido de melhorar a alternativa de projeto em relação ao objetivo não respeitado. Para que este ciclo seja realizado com sucesso, o sistema desenvolvido combina simulação e sistemas baseados em conhecimento, utilizando a experiência e o conhecimento adquiridos por especialistas durante prévios projetos de SAM. Um exemplo ilustra a eficácia do sistema computacional.This article describes a tandem knowledge-based system developed to verify whether a specific advanced manufacturing system (AMS scenario meets the design requirements defined by the design team. If a problem is found, the system starts an analysis-diagnosis-recommendation cycle in order to identify the possible cause(s of the design deficiency as well as to propose changes to improve the performance of the AMS scenario. For this cycle to be successful, the developed system combines simulation and knowledge-based systems, using the experience and knowledge acquired by specialists during previous AMS projects. A case study illustrates the effectiveness of the system.

  2. Knowledge-based computer security advisor

    International Nuclear Information System (INIS)

    Hunteman, W.J.; Squire, M.B.

    1991-01-01

    The rapid expansion of computer security information and technology has included little support to help the security officer identify the safeguards needed to comply with a policy and to secure a computing system. This paper reports that Los Alamos is developing a knowledge-based computer security system to provide expert knowledge to the security officer. This system includes a model for expressing the complex requirements in computer security policy statements. The model is part of an expert system that allows a security officer to describe a computer system and then determine compliance with the policy. The model contains a generic representation that contains network relationships among the policy concepts to support inferencing based on information represented in the generic policy description

  3. Weather, knowledge base and life-style

    Science.gov (United States)

    Bohle, Martin

    2015-04-01

    Why to main-stream curiosity for earth-science topics, thus to appraise these topics as of public interest? Namely, to influence practices how humankind's activities intersect the geosphere. How to main-stream that curiosity for earth-science topics? Namely, by weaving diverse concerns into common threads drawing on a wide range of perspectives: be it beauty or particularity of ordinary or special phenomena, evaluating hazards for or from mundane environments, or connecting the scholarly investigation with concerns of citizens at large; applying for threading traditional or modern media, arts or story-telling. Three examples: First "weather"; weather is a topic of primordial interest for most people: weather impacts on humans lives, be it for settlement, for food, for mobility, for hunting, for fishing, or for battle. It is the single earth-science topic that went "prime-time" since in the early 1950-ties the broadcasting of weather forecasts started and meteorologists present their work to the public, daily. Second "knowledge base"; earth-sciences are a relevant for modern societies' economy and value setting: earth-sciences provide insights into the evolution of live-bearing planets, the functioning of Earth's systems and the impact of humankind's activities on biogeochemical systems on Earth. These insights bear on production of goods, living conditions and individual well-being. Third "life-style"; citizen's urban culture prejudice their experiential connections: earth-sciences related phenomena are witnessed rarely, even most weather phenomena. In the past, traditional rural communities mediated their rich experiences through earth-centric story-telling. In course of the global urbanisation process this culture has given place to society-centric story-telling. Only recently anthropogenic global change triggered discussions on geoengineering, hazard mitigation, demographics, which interwoven with arts, linguistics and cultural histories offer a rich narrative

  4. DeepDive: Declarative Knowledge Base Construction.

    Science.gov (United States)

    De Sa, Christopher; Ratner, Alex; Ré, Christopher; Shin, Jaeho; Wang, Feiran; Wu, Sen; Zhang, Ce

    2016-03-01

    The dark data extraction or knowledge base construction (KBC) problem is to populate a SQL database with information from unstructured data sources including emails, webpages, and pdf reports. KBC is a long-standing problem in industry and research that encompasses problems of data extraction, cleaning, and integration. We describe DeepDive, a system that combines database and machine learning ideas to help develop KBC systems. The key idea in DeepDive is that statistical inference and machine learning are key tools to attack classical data problems in extraction, cleaning, and integration in a unified and more effective manner. DeepDive programs are declarative in that one cannot write probabilistic inference algorithms; instead, one interacts by defining features or rules about the domain. A key reason for this design choice is to enable domain experts to build their own KBC systems. We present the applications, abstractions, and techniques of DeepDive employed to accelerate construction of KBC systems.

  5. Systems engineering for very large systems

    Science.gov (United States)

    Lewkowicz, Paul E.

    Very large integrated systems have always posed special problems for engineers. Whether they are power generation systems, computer networks or space vehicles, whenever there are multiple interfaces, complex technologies or just demanding customers, the challenges are unique. 'Systems engineering' has evolved as a discipline in order to meet these challenges by providing a structured, top-down design and development methodology for the engineer. This paper attempts to define the general class of problems requiring the complete systems engineering treatment and to show how systems engineering can be utilized to improve customer satisfaction and profit ability. Specifically, this work will focus on a design methodology for the largest of systems, not necessarily in terms of physical size, but in terms of complexity and interconnectivity.

  6. A display to support knowledge based behavior

    International Nuclear Information System (INIS)

    Lindsay, R.W.

    1990-01-01

    A computerized display has been created for the Experimental Breeder Reactor II (EBR-II) that incorporates information from plant sensors in a thermodynamic model display. The display is designed to provide an operator with an overall view of the plant process as a heat engine. The thermodynamics of the plant are depicted through the use of ionic figures, animated by plant signals, that are related to the major plant components and systems such as the reactor, intermediate heat exchanger, secondary system, evaporators, superheaters, steam system, steam drum, and turbine-generator. This display supports knowledge based reasoning for the operator as well as providing the traditional rule and skill based behavior, and includes side benefits such a inherent signal validation

  7. A display to support knowledge based behavior

    International Nuclear Information System (INIS)

    Lindsay, R.W.

    1990-01-01

    This paper reports on a computerized display that has been created for the Experimental Breeder Reactor II that incorporates information from plant sensors in a thermodynamic model display. The display is designed to provide an operator with an overall view of the plant process as a heat engine. The thermodynamics of the plant are depicted through the use of iconic figures, animated by plant signals, that are related to the major plant components and systems such as the reactor, intermediate heat exchanger, secondary system, evaporators, superheaters, steam system, steam drum, and turbine-generator. This display supports knowledge based reasoning for the operator as well as providing data for the traditional rule and skill based behavior, and includes side benefits such as inherent signal validation

  8. The HEP Software and Computing Knowledge Base

    Science.gov (United States)

    Wenaus, T.

    2017-10-01

    HEP software today is a rich and diverse domain in itself and exists within the mushrooming world of open source software. As HEP software developers and users we can be more productive and effective if our work and our choices are informed by a good knowledge of what others in our community have created or found useful. The HEP Software and Computing Knowledge Base, hepsoftware.org, was created to facilitate this by serving as a collection point and information exchange on software projects and products, services, training, computing facilities, and relating them to the projects, experiments, organizations and science domains that offer them or use them. It was created as a contribution to the HEP Software Foundation, for which a HEP S&C knowledge base was a much requested early deliverable. This contribution will motivate and describe the system, what it offers, its content and contributions both existing and needed, and its implementation (node.js based web service and javascript client app) which has emphasized ease of use for both users and contributors.

  9. Enhancing acronym/abbreviation knowledge bases with semantic information.

    Science.gov (United States)

    Torii, Manabu; Liu, Hongfang

    2007-10-11

    In the biomedical domain, a terminology knowledge base that associates acronyms/abbreviations (denoted as SFs) with the definitions (denoted as LFs) is highly needed. For the construction such terminology knowledge base, we investigate the feasibility to build a system automatically assigning semantic categories to LFs extracted from text. Given a collection of pairs (SF,LF) derived from text, we i) assess the coverage of LFs and pairs (SF,LF) in the UMLS and justify the need of a semantic category assignment system; and ii) automatically derive name phrases annotated with semantic category and construct a system using machine learning. Utilizing ADAM, an existing collection of (SF,LF) pairs extracted from MEDLINE, our system achieved an f-measure of 87% when assigning eight UMLS-based semantic groups to LFs. The system has been incorporated into a web interface which integrates SF knowledge from multiple SF knowledge bases. Web site: http://gauss.dbb.georgetown.edu/liblab/SFThesurus.

  10. Fuzzy knowledge bases integration based on ontology

    OpenAIRE

    Ternovoy, Maksym; Shtogrina, Olena

    2012-01-01

    the paper describes the approach for fuzzy knowledge bases integration with the usage of ontology. This approach is based on metadata-base usage for integration of different knowledge bases with common ontology. The design process of metadata-base is described.

  11. Persistent Data/Knowledge Base

    Science.gov (United States)

    1991-06-01

    systems, the most powerful and representative one is probably POSTGRES [20], from the Univer- sity of California at Berkeley. POSTGRES is so named...The POSTGRES system provides objects, Ob- ject IDentifiers (OIDs), compound objects, multiple inheritance, versions, historical data, procedures, and...Stonebreaker and L. Rowe, 1986: The Design of POSTGRES . Pro- ceedings of SIGMOD Conference, Washington DC. [21] U. Dayal and J. Smith, 1985: PROBES: A

  12. Socially Relevant Knowledge Based Telemedicine

    Science.gov (United States)

    2011-10-01

    As Second Life does not provide SDK, the authors use open source e-learning software SLOODLE that links Second Life with a course management tool...operating system. The software automatically time-stamps all observations entered into the system. In this manner, observations were gathered unobtrusively...education. Health Info Libr J 2007, 24 (4), 2007, 233-45. 7. Wayne, D.B., Butter, J., Siddall, V.J., Fudala, M.J., Wade, L.D., Feinglass, J., McGaghie

  13. Knowledge base technology: a developer view

    Directory of Open Access Journals (Sweden)

    G. Ginkul

    1996-09-01

    Full Text Available In present paper we have endeavoured to tell about some reasonings, conclusions and pricticals results, to which we have come being busy with one of most interesting problems of modern science. This paper is a brief report of the group of scientists from the Laboratory of Artificial Intelligence Systems about their experience of work in the field of knowledge engineering. The researches in this area was started in our Laboratory more than 10 years ago, i.e. about in the moment, when there was just another rise in Artificial Intelligence, caused by mass emerging of expert systems. The tasks of knowledge engineering were being varied, and focal point of our researches was being varied too. Certainly, we have not solved all the problems, originating in this area. Our knowledge still has an approximate nature, but nevertheless, the outcomes obtained by us seem rather important and interesting. So, we want to tell about our experience in building of knowledge-based systems, and expert systems, in particular.

  14. Knowledge-Based Software Management

    International Nuclear Information System (INIS)

    Sally Schaffner; Matthew Bickley; Brian Bevins; Leon Clancy; Karen White

    2003-01-01

    Management of software in a dynamic environment such as is found at Jefferson Lab can be a daunting task. Software development tasks are distributed over a wide range of people with varying skill levels. The machine configuration is constantly changing requiring upgrades to software at both the hardware control level and the operator control level. In order to obtain high quality support from vendor service agreements, which is vital to maintaining 24/7 operations, hardware and software must be kept at industry's current levels. This means that periodic upgrades independent of machine configuration changes must take place. It is often difficult to identify and organize the information needed to guide the process of development, upgrades and enhancements. Dependencies between support software and applications need to be consistently identified to prevent introducing errors during upgrades and to allow adequate testing to be planned and performed. Developers also need access to information regarding compilers, make files and organized distribution directories. This paper describes a system under development at Jefferson Lab which will provide software developers and managers this type of information in a timely user-friendly fashion. The current status and future plans for the system will be detailed

  15. Measurement system for large motions

    International Nuclear Information System (INIS)

    Noyes, R.; Davies, L.; Kalinowski, J.; Stubbs, T.

    1979-05-01

    The system used to measure the response of geologic media to stress waves generated during and after underground tests performed by the Lawrence Livermore Laboratory (LLL) at the Department of Energy's Nevada Test Site (NTS) is described. Included are descriptions of the system transducers and accelerometers, the procedures used in calibrating and packaging the system at the North Las Vegas Facility of EG and G, Inc., the positioning of equipment during fielding activities at NTS, and the procedures used at LLL's facilities in California to reduce and analyze the data recorded on magnetic tape at NTS during an underground nuclear explosion. In summarizing, the authors give the system high marks, attributing its success to good basic design, careful installation, and rigorous calibration and data analysis techniques applied with good judgement on the part of the instrumentation engineers and data analysts. 10 figures

  16. Graph Learning in Knowledge Bases

    Energy Technology Data Exchange (ETDEWEB)

    Goldberg, Sean [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Wang, Daisy Zhe [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-09-01

    The amount of text data has been growing exponentially in recent years, giving rise to automatic information extraction methods that store text annotations in a database. The current state-of-theart structured prediction methods, however, are likely to contain errors and it’s important to be able to manage the overall uncertainty of the database. On the other hand, the advent of crowdsourcing has enabled humans to aid machine algorithms at scale. As part of this project we introduced pi-CASTLE , a system that optimizes and integrates human and machine computing as applied to a complex structured prediction problem involving conditional random fields (CRFs). We proposed strategies grounded in information theory to select a token subset, formulate questions for the crowd to label, and integrate these labelings back into the database using a method of constrained inference. On both a text segmentation task over academic citations and a named entity recognition task over tweets we showed an order of magnitude improvement in accuracy gain over baseline methods.

  17. Intelligent Tools for Planning Knowledge base Development and Verification

    Science.gov (United States)

    Chien, Steve A.

    1996-01-01

    A key obstacle hampering fielding of AI planning applications is the considerable expense of developing, verifying, updating, and maintaining the planning knowledge base (KB). Planning systems must be able to compare favorably in terms of software lifecycle costs to other means of automation such as scripts or rule-based expert systems.

  18. Generic knowledge-based analysis of social media for recommendations

    NARCIS (Netherlands)

    de Graaff, V.; van de Venis, Anne; van Keulen, Maurice; de By, R.A.; Bogers, Toine; Koolen, Marijn

    2015-01-01

    Recommender systems have been around for decades to help people find the best matching item in a pre-defined item set. Knowledge-based recommender systems are used to match users based on information that links the two, but they often focus on a single, specific application, such as movies to watch

  19. An Insulating Glass Knowledge Base

    Energy Technology Data Exchange (ETDEWEB)

    Michael L. Doll; Gerald Hendrickson; Gerard Lagos; Russell Pylkki; Chris Christensen; Charlie Cureija

    2005-08-01

    This report will discuss issues relevant to Insulating Glass (IG) durability performance by presenting the observations and developed conclusions in a logical sequential format. This concluding effort discusses Phase II activities and focuses on beginning to quantifying IG durability issues while continuing the approach presented in the Phase I activities (Appendix 1) which discuss a qualitative assessment of durability issues. Phase II developed a focus around two specific IG design classes previously presented in Phase I of this project. The typical box spacer and thermoplastic spacer design including their Failure Modes and Effect Analysis (FMEA) and Fault Tree diagrams were chosen to address two currently used IG design options with varying components and failure modes. The system failures occur due to failures of components or their interfaces. Efforts to begin quantifying the durability issues focused on the development and delivery of an included computer based IG durability simulation program. The focus/effort to deliver the foundation for a comprehensive IG durability simulation tool is necessary to address advancements needed to meet current and future building envelope energy performance goals. This need is based upon the current lack of IG field failure data and the lengthy field observation time necessary for this data collection. Ultimately, the simulation program is intended to be used by designers throughout the current and future industry supply chain. Its use is intended to advance IG durability as expectations grow around energy conservation and with the growth of embedded technologies as required to meet energy needs. In addition the tool has the immediate benefit of providing insight for research and improvement prioritization. Included in the simulation model presentation are elements and/or methods to address IG materials, design, process, quality, induced stress (environmental and other factors), validation, etc. In addition, acquired data

  20. The Coming of Knowledge-Based Business.

    Science.gov (United States)

    Davis, Stan; Botkin, Jim

    1994-01-01

    Economic growth will come from knowledge-based businesses whose "smart" products filter and interpret information. Businesses will come to think of themselves as educators and their customers as learners. (SK)

  1. Methodology for testing and validating knowledge bases

    Science.gov (United States)

    Krishnamurthy, C.; Padalkar, S.; Sztipanovits, J.; Purves, B. R.

    1987-01-01

    A test and validation toolset developed for artificial intelligence programs is described. The basic premises of this method are: (1) knowledge bases have a strongly declarative character and represent mostly structural information about different domains, (2) the conditions for integrity, consistency, and correctness can be transformed into structural properties of knowledge bases, and (3) structural information and structural properties can be uniformly represented by graphs and checked by graph algorithms. The interactive test and validation environment have been implemented on a SUN workstation.

  2. Automatic Knowledge Base Evolution by Learning Instances

    OpenAIRE

    Kim, Sundong

    2016-01-01

    Knowledge base is the way to store structured and unstructured data throughout the web. Since the size of the web is increasing rapidly, there are huge needs to structure the knowledge in a fully automated way. However fully-automated knowledge-base evolution on the Semantic Web is a major challenges, although there are many ontology evolution techniques available. Therefore learning ontology automatically can contribute to the semantic web society significantly. In this paper, we propose ful...

  3. Operation of large cryogenic systems

    International Nuclear Information System (INIS)

    Rode, C.H.; Ferry, B.; Fowler, W.B.; Makara, J.; Peterson, T.; Theilacker, J.; Walker, R.

    1985-06-01

    This report is based on the past 12 years of experiments on R and D and operation of the 27 kW Fermilab Tevatron Cryogenic System. In general the comments are applicable for all helium plants larger than 1000W (400 l/hr) and non mass-produced nitrogen plants larger than 50 tons per day. 14 refs., 3 figs., 1 tab

  4. DQS advisor: a visual interface and knowledge-based system to balance dose, quality, and reconstruction speed in iterative CT reconstruction with application to NLM-regularization

    International Nuclear Information System (INIS)

    Zheng, Z; Papenhausen, E; Mueller, K

    2013-01-01

    Motivated by growing concerns with regards to the x-ray dose delivered to the patient, low-dose computed tomography (CT) has gained substantial interest in recent years. However, achieving high-quality CT reconstructions from the limited projection data collected at reduced x-ray radiation is challenging, and iterative algorithms have been shown to perform much better than conventional analytical schemes in these cases. A problem with iterative methods in general is that they require users to set many parameters, and if set incorrectly high reconstruction time and/or low image quality are likely consequences. Since the interactions among parameters can be complex and thus effective settings can be difficult to identify for a given scanning scenario, these choices are often left to a highly-experienced human expert. To help alleviate this problem, we devise a computer-based assistant for this purpose, called dose, quality and speed (DQS)-advisor. It allows users to balance the three most important CT metrics–-DQS-–by ways of an intuitive visual interface. Using a known gold-standard, the system uses the ant-colony optimization algorithm to generate the most effective parameter settings for a comprehensive set of DQS configurations. A visual interface then presents the numerical outcome of this optimization, while a matrix display allows users to compare the corresponding images. The interface allows users to intuitively trade-off GPU-enabled reconstruction speed with quality and dose, while the system picks the associated parameter settings automatically. Further, once the knowledge has been generated, it can be used to correctly set the parameters for any new CT scan taken at similar scenarios. (paper)

  5. Refining Automatically Extracted Knowledge Bases Using Crowdsourcing

    Directory of Open Access Journals (Sweden)

    Chunhua Li

    2017-01-01

    Full Text Available Machine-constructed knowledge bases often contain noisy and inaccurate facts. There exists significant work in developing automated algorithms for knowledge base refinement. Automated approaches improve the quality of knowledge bases but are far from perfect. In this paper, we leverage crowdsourcing to improve the quality of automatically extracted knowledge bases. As human labelling is costly, an important research challenge is how we can use limited human resources to maximize the quality improvement for a knowledge base. To address this problem, we first introduce a concept of semantic constraints that can be used to detect potential errors and do inference among candidate facts. Then, based on semantic constraints, we propose rank-based and graph-based algorithms for crowdsourced knowledge refining, which judiciously select the most beneficial candidate facts to conduct crowdsourcing and prune unnecessary questions. Our experiments show that our method improves the quality of knowledge bases significantly and outperforms state-of-the-art automatic methods under a reasonable crowdsourcing cost.

  6. Refining Automatically Extracted Knowledge Bases Using Crowdsourcing.

    Science.gov (United States)

    Li, Chunhua; Zhao, Pengpeng; Sheng, Victor S; Xian, Xuefeng; Wu, Jian; Cui, Zhiming

    2017-01-01

    Machine-constructed knowledge bases often contain noisy and inaccurate facts. There exists significant work in developing automated algorithms for knowledge base refinement. Automated approaches improve the quality of knowledge bases but are far from perfect. In this paper, we leverage crowdsourcing to improve the quality of automatically extracted knowledge bases. As human labelling is costly, an important research challenge is how we can use limited human resources to maximize the quality improvement for a knowledge base. To address this problem, we first introduce a concept of semantic constraints that can be used to detect potential errors and do inference among candidate facts. Then, based on semantic constraints, we propose rank-based and graph-based algorithms for crowdsourced knowledge refining, which judiciously select the most beneficial candidate facts to conduct crowdsourcing and prune unnecessary questions. Our experiments show that our method improves the quality of knowledge bases significantly and outperforms state-of-the-art automatic methods under a reasonable crowdsourcing cost.

  7. Large inflated-antenna system

    Science.gov (United States)

    Hinson, W. F.; Keafer, L. S.

    1984-01-01

    It is proposed that for inflatable antenna systems, technology feasibility can be demonstrated and parametric design and scalability (scale factor 10 to 20) can be validated with an experiment using a 16-m-diameter antenna attached to the Shuttle. The antenna configuration consists of a thin film cone and paraboloid held to proper shape by internal pressure and a self-rigidizing torus. The cone and paraboloid would be made using pie-shaped gores with the paraboloid being coated with aluminum to provide reflectivity. The torus would be constructed using an aluminum polyester composite that when inflated would erect to a smooth shell that can withstand loads without internal pressure.

  8. Landscape ethnoecological knowledge base and management of ecosystem services in a Székely-Hungarian pre-capitalistic village system (Transylvania, Romania).

    Science.gov (United States)

    Molnár, Zsolt; Gellény, Krisztina; Margóczi, Katalin; Biró, Marianna

    2015-01-07

    ecosystem services. Some aspects of LEEK were so well known within Székely communities that they were not made explicit in village laws, others remained implicit because they were not related to regulations. Based on explicit and implicit information, we argue that Székelys possessed detailed knowledge of the local ecological system. Moreover the world's first known explicit mention of ecosystem services ("Benefits that are provided by Nature for free") originated from this region from 1786.

  9. Large thermal protection system panel

    Science.gov (United States)

    Weinberg, David J. (Inventor); Myers, Franklin K. (Inventor); Tran, Tu T. (Inventor)

    2003-01-01

    A protective panel for a reusable launch vehicle provides enhanced moisture protection, simplified maintenance, and increased temperature resistance. The protective panel includes an outer ceramic matrix composite (CMC) panel, and an insulative bag assembly coupled to the outer CMC panel for isolating the launch vehicle from elevated temperatures and moisture. A standoff attachment system attaches the outer CMC panel and the bag assembly to the primary structure of the launch vehicle. The insulative bag assembly includes a foil bag having a first opening shrink fitted to the outer CMC panel such that the first opening and the outer CMC panel form a water tight seal at temperatures below a desired temperature threshold. Fibrous insulation is contained within the foil bag for protecting the launch vehicle from elevated temperatures. The insulative bag assembly further includes a back panel coupled to a second opening of the foil bag such that the fibrous insulation is encapsulated by the back panel, the foil bag, and the outer CMC panel. The use of a CMC material for the outer panel in conjunction with the insulative bag assembly eliminates the need for waterproofing processes, and ultimately allows for more efficient reentry profiles.

  10. A Knowledge-based Recommendation Framework using SVN Numbers

    Directory of Open Access Journals (Sweden)

    Roddy Cabezas Padilla

    2017-06-01

    Full Text Available Current knowledge based recommender systems, despite proven useful and having a high impact, persist with some shortcomings. Among its limitations are the lack of more flexible models and the inclusion of indeterminacy of the factors involved for computing a global similarity.

  11. In defense of types in knowledge-based CAAD

    DEFF Research Database (Denmark)

    Galle, Per

    1997-01-01

    There are two basic approaches to representation of design knowledge in knowledge-based CAAD systems, the type-based approach which has a long tradition, and the more recent typeless approach. Proponents of the latter have offered a number of arguments against the type-based approach which...

  12. Towards an Intelligent Planning Knowledge Base Development Environment

    Science.gov (United States)

    Chien, S.

    1994-01-01

    ract describes work in developing knowledge base editing and debugging tools for the Multimission VICAR Planner (MVP) system. MVP uses artificial intelligence planning techniques to automatically construct executable complex image processing procedures (using models of the smaller constituent image processing requests made to the JPL Multimission Image Processing Laboratory.

  13. Knowledge Based Engineering for Spatial Database Management and Use

    Science.gov (United States)

    Peuquet, D. (Principal Investigator)

    1984-01-01

    The use of artificial intelligence techniques that are applicable to Geographic Information Systems (GIS) are examined. Questions involving the performance and modification to the database structure, the definition of spectra in quadtree structures and their use in search heuristics, extension of the knowledge base, and learning algorithm concepts are investigated.

  14. Reliability of large and complex systems

    CERN Document Server

    Kolowrocki, Krzysztof

    2014-01-01

    Reliability of Large and Complex Systems, previously titled Reliability of Large Systems, is an innovative guide to the current state and reliability of large and complex systems. In addition to revised and updated content on the complexity and safety of large and complex mechanisms, this new edition looks at the reliability of nanosystems, a key research topic in nanotechnology science. The author discusses the importance of safety investigation of critical infrastructures that have aged or have been exposed to varying operational conditions. This reference provides an asympt

  15. Automating large-scale reactor systems

    International Nuclear Information System (INIS)

    Kisner, R.A.

    1985-01-01

    This paper conveys a philosophy for developing automated large-scale control systems that behave in an integrated, intelligent, flexible manner. Methods for operating large-scale systems under varying degrees of equipment degradation are discussed, and a design approach that separates the effort into phases is suggested. 5 refs., 1 fig

  16. Knowledge-based automated radiopharmaceutical manufacturing for Positron Emission Tomography

    International Nuclear Information System (INIS)

    Alexoff, D.L.

    1991-01-01

    This article describes the application of basic knowledge engineering principles to the design of automated synthesis equipment for radiopharmaceuticals used in Positron Emission Tomography (PET). Before discussing knowledge programming, an overview of the development of automated radiopharmaceutical synthesis systems for PET will be presented. Since knowledge systems will rely on information obtained from machine transducers, a discussion of the uses of sensory feedback in today's automated systems follows. Next, the operation of these automated systems is contrasted to radiotracer production carried out by chemists, and the rationale for and basic concepts of knowledge-based programming are explained. Finally, a prototype knowledge-based system supporting automated radiopharmaceutical manufacturing of 18FDG at Brookhaven National Laboratory (BNL) is described using 1stClass, a commercially available PC-based expert system shell

  17. Large scale network-centric distributed systems

    CERN Document Server

    Sarbazi-Azad, Hamid

    2014-01-01

    A highly accessible reference offering a broad range of topics and insights on large scale network-centric distributed systems Evolving from the fields of high-performance computing and networking, large scale network-centric distributed systems continues to grow as one of the most important topics in computing and communication and many interdisciplinary areas. Dealing with both wired and wireless networks, this book focuses on the design and performance issues of such systems. Large Scale Network-Centric Distributed Systems provides in-depth coverage ranging from ground-level hardware issu

  18. MO-G-201-01: A Multi-Institutional Study Investigating the Performance of a Knowledge-Based Planning System Against Pinnacle Auto-Planning Engine in SIB-IMRT for the Head-And-Neck Cancer

    Energy Technology Data Exchange (ETDEWEB)

    Wu, B; Pang, D [Georgetown University Hospital, Washington, DC (United States); Kusters, M; Kunze-busch, M; Dijkema, T [Radboud University Medical Center, Nijmegen (Netherlands); McNutt, T [Johns Hopkins University, Baltimore, MD (United States); Sanguineti, G [Istituto Nazionale Tumori Regina Elena, Roma (Italy)

    2016-06-15

    generate plans of comparable quality in a multi-institutional setting. Variations in clinical protocols can be effectively addressed for cross-institutional adaptations. Binbin Wu and Todd McNutt are the co-inventors of a patent associated with the proposed knowledge-based planning system which was licensed to Varian Medical Systems in 2015; This research was in part supported by Philips Radiation Oncology Systems.

  19. Explicit Knowledge-based Reasoning for Visual Question Answering

    OpenAIRE

    Wang, Peng; Wu, Qi; Shen, Chunhua; Hengel, Anton van den; Dick, Anthony

    2015-01-01

    We describe a method for visual question answering which is capable of reasoning about contents of an image on the basis of information extracted from a large-scale knowledge base. The method not only answers natural language questions using concepts not contained in the image, but can provide an explanation of the reasoning by which it developed its answer. The method is capable of answering far more complex questions than the predominant long short-term memory-based approach, and outperform...

  20. Improving the Knowledge Base in Teacher Education.

    Science.gov (United States)

    Rockler, Michael J.

    Education in the United States for most of the last 50 years has built its knowledge base on a single dominating foundation--behavioral psychology. This paper analyzes the history of behaviorism. Syntheses are presented of the theories of Ivan P. Pavlov, J. B. Watson, and B. F. Skinner, all of whom contributed to the body of works on behaviorism.…

  1. Distributed simulation of large computer systems

    International Nuclear Information System (INIS)

    Marzolla, M.

    2001-01-01

    Sequential simulation of large complex physical systems is often regarded as a computationally expensive task. In order to speed-up complex discrete-event simulations, the paradigm of Parallel and Distributed Discrete Event Simulation (PDES) has been introduced since the late 70s. The authors analyze the applicability of PDES to the modeling and analysis of large computer system; such systems are increasingly common in the area of High Energy and Nuclear Physics, because many modern experiments make use of large 'compute farms'. Some feasibility tests have been performed on a prototype distributed simulator

  2. Large-scale Complex IT Systems

    OpenAIRE

    Sommerville, Ian; Cliff, Dave; Calinescu, Radu; Keen, Justin; Kelly, Tim; Kwiatkowska, Marta; McDermid, John; Paige, Richard

    2011-01-01

    This paper explores the issues around the construction of large-scale complex systems which are built as 'systems of systems' and suggests that there are fundamental reasons, derived from the inherent complexity in these systems, why our current software engineering methods and techniques cannot be scaled up to cope with the engineering challenges of constructing such systems. It then goes on to propose a research and education agenda for software engineering that identifies the major challen...

  3. Large-scale complex IT systems

    OpenAIRE

    Sommerville, Ian; Cliff, Dave; Calinescu, Radu; Keen, Justin; Kelly, Tim; Kwiatkowska, Marta; McDermid, John; Paige, Richard

    2012-01-01

    12 pages, 2 figures This paper explores the issues around the construction of large-scale complex systems which are built as 'systems of systems' and suggests that there are fundamental reasons, derived from the inherent complexity in these systems, why our current software engineering methods and techniques cannot be scaled up to cope with the engineering challenges of constructing such systems. It then goes on to propose a research and education agenda for software engineering that ident...

  4. Stability of large scale interconnected dynamical systems

    International Nuclear Information System (INIS)

    Akpan, E.P.

    1993-07-01

    Large scale systems modelled by a system of ordinary differential equations are considered and necessary and sufficient conditions are obtained for the uniform asymptotic connective stability of the systems using the method of cone-valued Lyapunov functions. It is shown that this model significantly improves the existing models. (author). 9 refs

  5. Managing Knowledge-Based Resource Capabilities Under Uncertainty

    OpenAIRE

    Janice E. Carrillo; Cheryl Gaimon

    2004-01-01

    A firm's ability to manage its knowledge-based resource capabilities has become increasingly important as a result of performance threats triggered by technology change and intense competition. At the manufacturing plant level, we focus on three repositories of knowledge that drive performance. First, the physical production or information systems represent knowledge embedded in the plant's technical systems. Second, the plant's workforce has knowledge, including diverse scientific informatio...

  6. Computing in Large-Scale Dynamic Systems

    NARCIS (Netherlands)

    Pruteanu, A.S.

    2013-01-01

    Software applications developed for large-scale systems have always been difficult to de- velop due to problems caused by the large number of computing devices involved. Above a certain network size (roughly one hundred), necessary services such as code updating, topol- ogy discovery and data

  7. A knowledge based method for nuclear plant loading pattern determination

    International Nuclear Information System (INIS)

    Dauboin, P.

    1990-01-01

    This paper deals with the design of a knowledge based system for solving an industrial problem which occurs in nuclear fuel management. The problem lies in determining satisfactory loading patterns for nuclear plants. Its primary feature consists in the huge search space involved. Conventional resolution processes are formally defined and analyzed: there is no general algorithm which guarantees to always provide a reasonable solution in each situation. We propose a new approach to solve this constrained search problem using domain-specific knowledge and general constraint-based heuristics. During a preprocessing step, a problem dependent search algorithm is designed. This procedure is then automatically implemented in FORTRAN. The generated routines have proved to be very efficient finding solutions which could not have been provided using logic programming. A prototype expert system has already been applied to actual reload pattern searches. While combining efficiency and flexibility, this knowledge based system enables human experts to rapidly match new constraints and requirements

  8. KBTAC: EPRI's center to assist the nuclear industry to apply the knowledge-based technology

    International Nuclear Information System (INIS)

    Lin, Chinglu; Naser, J.A.; Sun, B.K.H.

    1993-01-01

    The nuclear utility industry's complex engineering and procedure systems offer many opportunities for use of the knowledge-based technology such as expert systems and neural networks. The ability of expert systems to enhance human experts makes them an important tool in the areas of engineering, operations and maintenance. However, many current industry applications are research projects or turnkey systems supplied by vendors. These often do not impart to utility technical staff a clear understanding of the capabilities of knowledge-based systems (KBS). More importantly, simply using completed applications does not meet utilities' need to acquire the capabilities to build their own knowledge-based systems. Thus, EPRI is supporting its member utilities utilization of knowledge-based technology for power plant engineering, operations, and maintenance applications through the establishment of the Knowledge-Based Technology Application Center (KBTAC)

  9. Trust dynamics in a large system implementation

    DEFF Research Database (Denmark)

    Schlichter, Bjarne Rerup; Rose, Jeremy

    2013-01-01

    outcomes, but largely ignored the dynamics of trust relations. Giddens, as part of his study of modernity, theorises trust dynamics in relation to abstract social systems, though without focusing on information systems. We use Giddens’ concepts to investigate evolving trust relationships in a longitudinal......A large information systems implementation (such as Enterprise Resource Planning systems) relies on the trust of its stakeholders to succeed. Such projects impact diverse groups of stakeholders, each with their legitimate interests and expectations. Levels of stakeholder trust can be expected...... case analysis of a large Integrated Hospital System implementation for the Faroe Islands. Trust relationships suffered a serious breakdown, but the project was able to recover and meet its goals. We develop six theoretical propositions theorising the relationship between trust and project outcomes...

  10. Semantic computing and language knowledge bases

    Science.gov (United States)

    Wang, Lei; Wang, Houfeng; Yu, Shiwen

    2017-09-01

    As the proposition of the next-generation Web - semantic Web, semantic computing has been drawing more and more attention within the circle and the industries. A lot of research has been conducted on the theory and methodology of the subject, and potential applications have also been investigated and proposed in many fields. The progress of semantic computing made so far cannot be detached from its supporting pivot - language resources, for instance, language knowledge bases. This paper proposes three perspectives of semantic computing from a macro view and describes the current status of affairs about the construction of language knowledge bases and the related research and applications that have been carried out on the basis of these resources via a case study in the Institute of Computational Linguistics at Peking University.

  11. Bridging the gap: simulations meet knowledge bases

    Science.gov (United States)

    King, Gary W.; Morrison, Clayton T.; Westbrook, David L.; Cohen, Paul R.

    2003-09-01

    Tapir and Krill are declarative languages for specifying actions and agents, respectively, that can be executed in simulation. As such, they bridge the gap between strictly declarative knowledge bases and strictly executable code. Tapir and Krill components can be combined to produce models of activity which can answer questions about mechanisms and processes using conventional inference methods and simulation. Tapir was used in DARPA's Rapid Knowledge Formation (RKF) project to construct models of military tactics from the Army Field Manual FM3-90. These were then used to build Courses of Actions (COAs) which could be critiqued by declarative reasoning or via Monte Carlo simulation. Tapir and Krill can be read and written by non-knowledge engineers making it an excellent vehicle for Subject Matter Experts to build and critique knowledge bases.

  12. One knowledge base or many knowledge pools?

    DEFF Research Database (Denmark)

    Lundvall, Bengt-Åke

    It is increasingly realized that knowledge is the most important resource and that learning is the most important process in the economy. Sometimes this is expressed by coining the current era as characterised by a ‘knowledge based economy'. But this concept might be misleading by indicating...... that there is one common knowledge base on which economic activities can be built. In this paper we argue that it is more appropriate to see the economy as connecting to different ‘pools of knowledge'. The argument is built upon a conceptual framework where we make distinctions between private/public, local....../global, individual/collective and tacit/codified knowledge. The purpose is both ‘academic' and practical. Our analysis demonstrates the limits of a narrowly economic perspective on knowledge and we show that these distinctions have important implications both for innovation policy and for management of innovation....

  13. The Ontology of Knowledge Based Optimization

    OpenAIRE

    Nasution, Mahyuddin K. M.

    2012-01-01

    Optimization has been becoming a central of studies in mathematic and has many areas with different applications. However, many themes of optimization came from different area have not ties closing to origin concepts. This paper is to address some variants of optimization problems using ontology in order to building basic of knowledge about optimization, and then using it to enhance strategy to achieve knowledge based optimization.

  14. A STEPPING STONE TOWARDS KNOWLEDGE BASED MAINTENANCE

    OpenAIRE

    G. Waeyenbergh; L. Pintelon; L. Gelders

    2012-01-01

    Maintenance decision making becomes more and more a management concern. Some decades ago, maintenance was still often considered as an unavoidable side effect of production. The perception of maintenance has evolved considerably. One of the current issues is the maintenance concept, being the mix of maintenance interventions and the general framework for determining this mix. In this paper we describe a modular framework, called Knowledge Based Maintenance, for developing a customised mainten...

  15. Satellite Contamination and Materials Outgassing Knowledge base

    Science.gov (United States)

    Minor, Jody L.; Kauffman, William J. (Technical Monitor)

    2001-01-01

    Satellite contamination continues to be a design problem that engineers must take into account when developing new satellites. To help with this issue, NASA's Space Environments and Effects (SEE) Program funded the development of the Satellite Contamination and Materials Outgassing Knowledge base. This engineering tool brings together in one location information about the outgassing properties of aerospace materials based upon ground-testing data, the effects of outgassing that has been observed during flight and measurements of the contamination environment by on-orbit instruments. The knowledge base contains information using the ASTM Standard E- 1559 and also consolidates data from missions using quartz-crystal microbalances (QCM's). The data contained in the knowledge base was shared with NASA by government agencies and industry in the US and international space agencies as well. The term 'knowledgebase' was used because so much information and capability was brought together in one comprehensive engineering design tool. It is the SEE Program's intent to continually add additional material contamination data as it becomes available - creating a dynamic tool whose value to the user is ever increasing. The SEE Program firmly believes that NASA, and ultimately the entire contamination user community, will greatly benefit from this new engineering tool and highly encourages the community to not only use the tool but add data to it as well.

  16. Numerical solution of large sparse linear systems

    International Nuclear Information System (INIS)

    Meurant, Gerard; Golub, Gene.

    1982-02-01

    This note is based on one of the lectures given at the 1980 CEA-EDF-INRIA Numerical Analysis Summer School whose aim is the study of large sparse linear systems. The main topics are solving least squares problems by orthogonal transformation, fast Poisson solvers and solution of sparse linear system by iterative methods with a special emphasis on preconditioned conjuguate gradient method [fr

  17. Developing a knowledge base for the management of severe accidents

    International Nuclear Information System (INIS)

    Nelson, W.R.; Jenkins, J.P.

    1986-01-01

    Prior to the accident at Three Mile Island, little attention was given to the development of procedures for the management of severe accidents, that is, accidents in which the reactor core is damaged. Since TMI, however, significant effort has been devoted to developing strategies for severe accident management. At the same time, the potential application of artificial intelligence techniques, particularly expert systems, to complex decision-making tasks such as accident diagnosis and response has received considerable attention. The need to develop strategies for accident management suggests that a computerized knowledge base such as used by an expert system could be developed to collect and organize knowledge for severe accident management. This paper suggests a general method which could be used to develop such a knowledge base, and how it could be used to enhance accident management capabilities

  18. Modeling and simulation of large HVDC systems

    Energy Technology Data Exchange (ETDEWEB)

    Jin, H.; Sood, V.K.

    1993-01-01

    This paper addresses the complexity and the amount of work in preparing simulation data and in implementing various converter control schemes and the excessive simulation time involved in modelling and simulation of large HVDC systems. The Power Electronic Circuit Analysis program (PECAN) is used to address these problems and a large HVDC system with two dc links is simulated using PECAN. A benchmark HVDC system is studied to compare the simulation results with those from other packages. The simulation time and results are provided in the paper.

  19. Workflow management in large distributed systems

    International Nuclear Information System (INIS)

    Legrand, I; Newman, H; Voicu, R; Dobre, C; Grigoras, C

    2011-01-01

    The MonALISA (Monitoring Agents using a Large Integrated Services Architecture) framework provides a distributed service system capable of controlling and optimizing large-scale, data-intensive applications. An essential part of managing large-scale, distributed data-processing facilities is a monitoring system for computing facilities, storage, networks, and the very large number of applications running on these systems in near realtime. All this monitoring information gathered for all the subsystems is essential for developing the required higher-level services—the components that provide decision support and some degree of automated decisions—and for maintaining and optimizing workflow in large-scale distributed systems. These management and global optimization functions are performed by higher-level agent-based services. We present several applications of MonALISA's higher-level services including optimized dynamic routing, control, data-transfer scheduling, distributed job scheduling, dynamic allocation of storage resource to running jobs and automated management of remote services among a large set of grid facilities.

  20. Workflow management in large distributed systems

    Science.gov (United States)

    Legrand, I.; Newman, H.; Voicu, R.; Dobre, C.; Grigoras, C.

    2011-12-01

    The MonALISA (Monitoring Agents using a Large Integrated Services Architecture) framework provides a distributed service system capable of controlling and optimizing large-scale, data-intensive applications. An essential part of managing large-scale, distributed data-processing facilities is a monitoring system for computing facilities, storage, networks, and the very large number of applications running on these systems in near realtime. All this monitoring information gathered for all the subsystems is essential for developing the required higher-level services—the components that provide decision support and some degree of automated decisions—and for maintaining and optimizing workflow in large-scale distributed systems. These management and global optimization functions are performed by higher-level agent-based services. We present several applications of MonALISA's higher-level services including optimized dynamic routing, control, data-transfer scheduling, distributed job scheduling, dynamic allocation of storage resource to running jobs and automated management of remote services among a large set of grid facilities.

  1. Knowledge-based View in the Franchising Research Literature

    OpenAIRE

    TSAI, Fu-Sheng; KUO, Chin-Chiung; LIU, Chi-Fang

    2017-01-01

    Abstract. This study was conducted to understand the state of research on applications of Knowledge-based View in franchise systems. First, we used SALSA (Search, Appraisal, Synthesis, and Analysis), a simple systematic data search method, to obtain 61 sample papers. Second, the citations of authors and publications were analyzed using the bibliometric method to understand the authors and the publications that had the most impact as well as the trend of current studies in the field of knowled...

  2. Large autonomous spacecraft electrical power system (LASEPS)

    Science.gov (United States)

    Dugal-Whitehead, Norma R.; Johnson, Yvette B.

    1992-01-01

    NASA - Marshall Space Flight Center is creating a large high voltage electrical power system testbed called LASEPS. This testbed is being developed to simulate an end-to-end power system from power generation and source to loads. When the system is completed it will have several power configurations, which will include several battery configurations. These configurations are: two 120 V batteries, one or two 150 V batteries, and one 250 to 270 V battery. This breadboard encompasses varying levels of autonomy from remote power converters to conventional software control to expert system control of the power system elements. In this paper, the construction and provisions of this breadboard are discussed.

  3. CGKB: an annotation knowledge base for cowpea (Vigna unguiculata L. methylation filtered genomic genespace sequences

    Directory of Open Access Journals (Sweden)

    Spraggins Thomas A

    2007-04-01

    potential domains on annotated GSS were analyzed using the HMMER package against the Pfam database. The annotated GSS were also assigned with Gene Ontology annotation terms and integrated with 228 curated plant metabolic pathways from the Arabidopsis Information Resource (TAIR knowledge base. The UniProtKB-Swiss-Prot ENZYME database was used to assign putative enzymatic function to each GSS. Each GSS was also analyzed with the Tandem Repeat Finder (TRF program in order to identify potential SSRs for molecular marker discovery. The raw sequence data, processed annotation, and SSR results were stored in relational tables designed in key-value pair fashion using a PostgreSQL relational database management system. The biological knowledge derived from the sequence data and processed results are represented as views or materialized views in the relational database management system. All materialized views are indexed for quick data access and retrieval. Data processing and analysis pipelines were implemented using the Perl programming language. The web interface was implemented in JavaScript and Perl CGI running on an Apache web server. The CPU intensive data processing and analysis pipelines were run on a computer cluster of more than 30 dual-processor Apple XServes. A job management system called Vela was created as a robust way to submit large numbers of jobs to the Portable Batch System (PBS. Conclusion CGKB is an integrated and annotated resource for cowpea GSS with features of homology-based and HMM-based annotations, enzyme and pathway annotations, GO term annotation, toolkits, and a large number of other facilities to perform complex queries. The cowpea GSS, chloroplast sequences, mitochondrial sequences, retroelements, and SSR sequences are available as FASTA formatted files and downloadable at CGKB. This database and web interface are publicly accessible at http://cowpeagenomics.med.virginia.edu/CGKB/.

  4. Building and Using Large Common Sense Knowledge Bases

    National Research Council Canada - National Science Library

    Forbus, Kenneth D

    2001-01-01

    .... We developed techniques that enabled realistic-sized situations to be compared, for automatically extracting and extending cases dynamically based on task constraints from a general purpose knowledge...

  5. Knowledge Based Product Configuration - a documentatio tool for configuration projects

    DEFF Research Database (Denmark)

    Hvam, Lars; Malis, Martin

    2003-01-01

    . A lot of knowledge isput into these systems and many domain experts are involved. This calls for an effective documentation system in order to structure this knowledge in a way that fits to the systems. Standard configuration systems do not support this kind of documentation. The chapter deals...... with the development of a Lotus Notes application that serves as a knowledge based documentation tool for configuration projects. A prototype has been developed and tested empirically in an industrial case-company. It has proved to be a succes....

  6. Models for large superconducting toroidal magnet systems

    International Nuclear Information System (INIS)

    Arendt, F.; Brechna, H.; Erb, J.; Komarek, P.; Krauth, H.; Maurer, W.

    1976-01-01

    Prior to the design of large GJ toroidal magnet systems it is appropriate to procure small scale models, which can simulate their pertinent properties and allow to investigate their relevant phenomena. The important feature of the model is to show under which circumstances the system performance can be extrapolated to large magnets. Based on parameters such as the maximum magnetic field and the current density, the maximum tolerable magneto-mechanical stresses, a simple method of designing model magnets is presented. It is shown how pertinent design parameters are changed when the toroidal dimensions are altered. In addition some conductor cost estimations are given based on reactor power output and wall loading

  7. Radiation protection optimization using a knowledge based methodology

    International Nuclear Information System (INIS)

    Reyes-Jimenez, J.; Tsoukalas, L.H.

    1991-01-01

    This paper presents a knowledge based methodology for radiological planning and radiation protection optimization. The cost-benefit methodology described on International Commission of Radiation Protection Report No. 37 is employed within a knowledge based framework for the purpose of optimizing radiation protection and plan maintenance activities while optimizing radiation protection. 1, 2 The methodology is demonstrated through an application to a heating ventilation and air conditioning (HVAC) system. HVAC is used to reduce radioactivity concentration levels in selected contaminated multi-compartment models at nuclear power plants when higher than normal radiation levels are detected. The overall objective is to reduce personnel exposure resulting from airborne radioactivity, when routine or maintenance access is required in contaminated areas. 2 figs, 15 refs

  8. SPRINT RA 230: Methodology for knowledge based developments

    International Nuclear Information System (INIS)

    Wallsgrove, R.; Munro, F.

    1991-01-01

    SPRINT RA 230: A Methodology for Knowledge Based Developments, funded by the European Commission, was set up to investigate the use of KBS in the engineering industry. Its aim was to find out low KBS were currently used and what people's conceptions of them was, to disseminate current knowledge and to recommend further research into this area. A survey (by post and face to face interviews) was carried out under SPRINT RA 230 to investigate requirements for more intelligent software. In the survey we looked both at how people think about Knowledge Based Systems (KBS), what they find useful and what is not useful, and what current expertise problems or limitations of conventional software might suggest KBS solutions. (orig./DG)

  9. Data acquisition system issues for large experiments

    International Nuclear Information System (INIS)

    Siskind, E.J.

    2007-01-01

    This talk consists of personal observations on two classes of data acquisition ('DAQ') systems for Silicon trackers in large experiments with which the author has been concerned over the last three or more years. The first half is a classic 'lessons learned' recital based on experience with the high-level debug and configuration of the DAQ system for the GLAST LAT detector. The second half is concerned with a discussion of the promises and pitfalls of using modern (and future) generations of 'system-on-a-chip' ('SOC') or 'platform' field-programmable gate arrays ('FPGAs') in future large DAQ systems. The DAQ system pipeline for the 864k channels of Si tracker in the GLAST LAT consists of five tiers of hardware buffers which ultimately feed into the main memory of the (two-active-node) level-3 trigger processor farm. The data formats and buffer volumes of these tiers are briefly described, as well as the flow control employed between successive tiers. Lessons learned regarding data formats, buffer volumes, and flow control/data discard policy are discussed. The continued development of platform FPGAs containing large amounts of configurable logic fabric, embedded PowerPC hard processor cores, digital signal processing components, large volumes of on-chip buffer memory, and multi-gigabit serial I/O capability permits DAQ system designers to vastly increase the amount of data preprocessing that can be performed in parallel within the DAQ pipeline for detector systems in large experiments. The capabilities of some currently available FPGA families are reviewed, along with the prospects for next-generation families of announced, but not yet available, platform FPGAs. Some experience with an actual implementation is presented, and reconciliation between advertised and achievable specifications is attempted. The prospects for applying these components to space-borne Si tracker detectors are briefly discussed

  10. ROMANIA AND THE KNOWLEDGE-BASED ECONOMY: INNOVATION THE SOURCE OF ECONOMIC GROWTH

    OpenAIRE

    Holban (Oncioiu) Ionica; Oncioiu Florin Razvan

    2008-01-01

    The is already a vast literature on the role of knowledge in economic growth butthere is need to clarify the meaning and scope of this term and define the Romanianperspective on the relationship between knowledge-based economy and growth. This paper focuses on innovation systems in Romania as the key challenge and meanfor embracing growth based on knowledge-based economy.

  11. Siemens: Smart Technologies for Large Control Systems

    CERN Multimedia

    CERN. Geneva; BAKANY, Elisabeth

    2015-01-01

    The CERN Large Hadron Collider (LHC) is known to be one of the most complex scientific machines ever built by mankind. Its correct functioning relies on the integration of a multitude of interdependent industrial control systems, which provide different and essential services to run and protect the accelerators and experiments. These systems have to deal with several millions of data points (e.g. sensors, actuators, configuration parameters, etc…) which need to be acquired, processed, archived and analysed. Since more than 20 years, CERN and Siemens have developed a strong collaboration to deal with the challenges for these large systems. The presentation will cover the current work on the SCADA (Supervisory Control and Data Acquisition) systems and Data Analytics Frameworks.

  12. A STEPPING STONE TOWARDS KNOWLEDGE BASED MAINTENANCE

    Directory of Open Access Journals (Sweden)

    G. Waeyenbergh

    2012-01-01

    Full Text Available Maintenance decision making becomes more and more a management concern. Some decades ago, maintenance was still often considered as an unavoidable side effect of production. The perception of maintenance has evolved considerably. One of the current issues is the maintenance concept, being the mix of maintenance interventions and the general framework for determining this mix. In this paper we describe a modular framework, called Knowledge Based Maintenance, for developing a customised maintenance concept. After describing the general framework and its decision support use, some case experiences are given. This experience covers some elements of the proposed framework.

  13. Geothermal ORC Systems Using Large Screw Expanders

    OpenAIRE

    Biederman, Tim R.; Brasz, Joost J.

    2014-01-01

    Geothermal ORC Systems using Large Screw Expanders Tim Biederman Cyrq Energy Abstract This paper describes a low-temperature Organic Rankine Cycle Power Recovery system with a screw expander a derivative of developed of Kaishan's line of screw compressors, as its power unit. The screw expander design is a modified version of its existing refrigeration compressor used on water-cooled chillers. Starting the ORC development program with existing refrigeration screw compre...

  14. Quality Function Deployment for Large Systems

    Science.gov (United States)

    Dean, Edwin B.

    1992-01-01

    Quality Function Deployment (QFD) is typically applied to small subsystems. This paper describes efforts to extend QFD to large scale systems. It links QFD to the system engineering process, the concurrent engineering process, the robust design process, and the costing process. The effect is to generate a tightly linked project management process of high dimensionality which flushes out issues early to provide a high quality, low cost, and, hence, competitive product. A pre-QFD matrix linking customers to customer desires is described.

  15. Advanced manipulator system for large hot cells

    International Nuclear Information System (INIS)

    Vertut, J.; Moreau, C.; Brossard, J.P.

    1981-01-01

    Large hot cells can be approached as extrapolated from smaller ones as wide, higher or longer in size with the same concept of using mechanical master slave manipulators and high density windows. This concept leads to a large number of working places and corresponding equipments, with a number of penetrations through the biological protection. When the large cell does not need a permanent operation of number of work places, as in particular to serve PIE machines and maintain the facility, use of servo manipulators with a large supporting unit and extensive use of television appears optimal. The advance on MA 23 and supports will be described including the extra facilities related to manipulators introduction and maintenance. The possibility to combine a powered manipulator and MA 23 (single or pair) on the same boom crane system will be described. An advance control system to bring the minimal dead time to control support movement, associated to the master slave arm operation is under development. The general television system includes over view cameras, associated with the limited number of windows, and manipulators camera. A special new system will be described which brings an automatic control of manipulator cameras and saves operator load and dead time. Full scale tests with MA 23 and support will be discussed. (author)

  16. Sequential decoders for large MIMO systems

    KAUST Repository

    Ali, Konpal S.; Abediseid, Walid; Alouini, Mohamed-Slim

    2014-01-01

    the Sequential Decoder using the Fano Algorithm for large MIMO systems. A parameter called the bias is varied to attain different performance-complexity trade-offs. Low values of the bias result in excellent performance but at the expense of high complexity

  17. Beyond Multiplexing Gain in Large MIMO Systems

    DEFF Research Database (Denmark)

    Cakmak, Burak; Müller, Ralf R.; Fleury, Bernard Henri

    growth (multiplexing gain). Even when the channel entries are i.i.d. the deviation from the linear growth is significant. We also find an additive property of the deviation for a concatenated MIMO system. Finally, we quantify the deviation of the large SNR capacity from the exact capacity and find...

  18. Fires in large scale ventilation systems

    International Nuclear Information System (INIS)

    Gregory, W.S.; Martin, R.A.; White, B.W.; Nichols, B.D.; Smith, P.R.; Leslie, I.H.; Fenton, D.L.; Gunaji, M.V.; Blythe, J.P.

    1991-01-01

    This paper summarizes the experience gained simulating fires in large scale ventilation systems patterned after ventilation systems found in nuclear fuel cycle facilities. The series of experiments discussed included: (1) combustion aerosol loading of 0.61x0.61 m HEPA filters with the combustion products of two organic fuels, polystyrene and polymethylemethacrylate; (2) gas dynamic and heat transport through a large scale ventilation system consisting of a 0.61x0.61 m duct 90 m in length, with dampers, HEPA filters, blowers, etc.; (3) gas dynamic and simultaneous transport of heat and solid particulate (consisting of glass beads with a mean aerodynamic diameter of 10μ) through the large scale ventilation system; and (4) the transport of heat and soot, generated by kerosene pool fires, through the large scale ventilation system. The FIRAC computer code, designed to predict fire-induced transients in nuclear fuel cycle facility ventilation systems, was used to predict the results of experiments (2) through (4). In general, the results of the predictions were satisfactory. The code predictions for the gas dynamics, heat transport, and particulate transport and deposition were within 10% of the experimentally measured values. However, the code was less successful in predicting the amount of soot generation from kerosene pool fires, probably due to the fire module of the code being a one-dimensional zone model. The experiments revealed a complicated three-dimensional combustion pattern within the fire room of the ventilation system. Further refinement of the fire module within FIRAC is needed. (orig.)

  19. Knowledge-based Fragment Binding Prediction

    Science.gov (United States)

    Tang, Grace W.; Altman, Russ B.

    2014-01-01

    Target-based drug discovery must assess many drug-like compounds for potential activity. Focusing on low-molecular-weight compounds (fragments) can dramatically reduce the chemical search space. However, approaches for determining protein-fragment interactions have limitations. Experimental assays are time-consuming, expensive, and not always applicable. At the same time, computational approaches using physics-based methods have limited accuracy. With increasing high-resolution structural data for protein-ligand complexes, there is now an opportunity for data-driven approaches to fragment binding prediction. We present FragFEATURE, a machine learning approach to predict small molecule fragments preferred by a target protein structure. We first create a knowledge base of protein structural environments annotated with the small molecule substructures they bind. These substructures have low-molecular weight and serve as a proxy for fragments. FragFEATURE then compares the structural environments within a target protein to those in the knowledge base to retrieve statistically preferred fragments. It merges information across diverse ligands with shared substructures to generate predictions. Our results demonstrate FragFEATURE's ability to rediscover fragments corresponding to the ligand bound with 74% precision and 82% recall on average. For many protein targets, it identifies high scoring fragments that are substructures of known inhibitors. FragFEATURE thus predicts fragments that can serve as inputs to fragment-based drug design or serve as refinement criteria for creating target-specific compound libraries for experimental or computational screening. PMID:24762971

  20. A Case for Embedded Natural Logic for Ontological Knowledge Bases

    DEFF Research Database (Denmark)

    Andreasen, Troels; Nilsson, Jørgen Fischer

    2014-01-01

    We argue in favour of adopting a form of natural logic for ontology-structured knowledge bases as an alternative to description logic and rule based languages. Natural logic is a form of logic resembling natural language assertions, unlike description logic. This is essential e.g. in life sciences......, where the large and evolving knowledge specifications should be directly accessible to domain experts. Moreover, natural logic comes with intuitive inference rules. The considered version of natural logic leans toward the closed world assumption (CWA) unlike the open world assumption with classical...

  1. Entry control system for large populations

    International Nuclear Information System (INIS)

    Merillat, P.D.

    1982-01-01

    An Entry Control System has been developed which is appropriate for use at an installation with a large population requiring access over a large area. This is accomplished by centralizing the data base management and enrollment functions and decentralizing the guard-assisted, positive personnel identification and access functions. Current information pertaining to all enrollees is maintained through user-friendly enrollment stations. These stations may be used to enroll individuals, alter their area access authorizations, change expiration dates, and other similar functions. An audit trail of data base alterations is provided to the System Manager. Decentrailized systems exist at each area to which access is controlled. The central system provides these systems with the necessary entry control information to allow them to operate microprocessor-driven entry control devices. The system is comprised of commercially available entry control components and is structured such that it will be able to incorporate improved devices as technology porogresses. Currently, access is granted to individuals who possess a valid credential, have current access authorization, can supply a memorized personal identification number, and whose physical hand dimensions match their profile obtained during enrollment. The entry control devices report misuses as security violations to a Guard Alarm Display and Assessment System

  2. Global-Detector; GIS- and Knowledge-based tool for a global detection of the potential for production, supply and demand

    NARCIS (Netherlands)

    Hennen, W.H.G.J.; Daane, P.A.J.; Duijvendijk, van Kees

    2017-01-01

    Wageningen Economic Research has developed Global-Detector, a knowledge-based Geographic Information System that aims to detect the worldwide potential for production, demand and market strategies. At any spot in the world Global-Detector can show the values from a large amount of indicators, such

  3. Large-scale Intelligent Transporation Systems simulation

    Energy Technology Data Exchange (ETDEWEB)

    Ewing, T.; Canfield, T.; Hannebutte, U.; Levine, D.; Tentner, A.

    1995-06-01

    A prototype computer system has been developed which defines a high-level architecture for a large-scale, comprehensive, scalable simulation of an Intelligent Transportation System (ITS) capable of running on massively parallel computers and distributed (networked) computer systems. The prototype includes the modelling of instrumented ``smart`` vehicles with in-vehicle navigation units capable of optimal route planning and Traffic Management Centers (TMC). The TMC has probe vehicle tracking capabilities (display position and attributes of instrumented vehicles), and can provide 2-way interaction with traffic to provide advisories and link times. Both the in-vehicle navigation module and the TMC feature detailed graphical user interfaces to support human-factors studies. The prototype has been developed on a distributed system of networked UNIX computers but is designed to run on ANL`s IBM SP-X parallel computer system for large scale problems. A novel feature of our design is that vehicles will be represented by autonomus computer processes, each with a behavior model which performs independent route selection and reacts to external traffic events much like real vehicles. With this approach, one will be able to take advantage of emerging massively parallel processor (MPP) systems.

  4. A structural informatics approach to mine kinase knowledge bases.

    Science.gov (United States)

    Brooijmans, Natasja; Mobilio, Dominick; Walker, Gary; Nilakantan, Ramaswamy; Denny, Rajiah A; Feyfant, Eric; Diller, David; Bikker, Jack; Humblet, Christine

    2010-03-01

    In this paper, we describe a combination of structural informatics approaches developed to mine data extracted from existing structure knowledge bases (Protein Data Bank and the GVK database) with a focus on kinase ATP-binding site data. In contrast to existing systems that retrieve and analyze protein structures, our techniques are centered on a database of ligand-bound geometries in relation to residues lining the binding site and transparent access to ligand-based SAR data. We illustrate the systems in the context of the Abelson kinase and related inhibitor structures. 2009 Elsevier Ltd. All rights reserved.

  5. Fault detection and reliability, knowledge based and other approaches

    International Nuclear Information System (INIS)

    Singh, M.G.; Hindi, K.S.; Tzafestas, S.G.

    1987-01-01

    These proceedings are split up into four major parts in order to reflect the most significant aspects of reliability and fault detection as viewed at present. The first part deals with knowledge-based systems and comprises eleven contributions from leading experts in the field. The emphasis here is primarily on the use of artificial intelligence, expert systems and other knowledge-based systems for fault detection and reliability. The second part is devoted to fault detection of technological systems and comprises thirteen contributions dealing with applications of fault detection techniques to various technological systems such as gas networks, electric power systems, nuclear reactors and assembly cells. The third part of the proceedings, which consists of seven contributions, treats robust, fault tolerant and intelligent controllers and covers methodological issues as well as several applications ranging from nuclear power plants to industrial robots to steel grinding. The fourth part treats fault tolerant digital techniques and comprises five contributions. Two papers, one on reactor noise analysis, the other on reactor control system design, are indexed separately. (author)

  6. Database management system for large container inspection system

    International Nuclear Information System (INIS)

    Gao Wenhuan; Li Zheng; Kang Kejun; Song Binshan; Liu Fang

    1998-01-01

    Large Container Inspection System (LCIS) based on radiation imaging technology is a powerful tool for the Customs to check the contents inside a large container without opening it. The author has discussed a database application system, as a part of Signal and Image System (SIS), for the LCIS. The basic requirements analysis was done first. Then the selections of computer hardware, operating system, and database management system were made according to the technology and market products circumstance. Based on the above considerations, a database application system with central management and distributed operation features has been implemented

  7. Detector correction in large container inspection systems

    CERN Document Server

    Kang Ke Jun; Chen Zhi Qiang

    2002-01-01

    In large container inspection systems, the image is constructed by parallel scanning with a one-dimensional detector array with a linac used as the X-ray source. The linear nonuniformity and nonlinearity of multiple detectors and the nonuniform intensity distribution of the X-ray sector beam result in horizontal striations in the scan image. This greatly impairs the image quality, so the image needs to be corrected. The correction parameters are determined experimentally by scaling the detector responses at multiple points with logarithm interpolation of the results. The horizontal striations are eliminated by modifying the original image data with the correction parameters. This method has proven to be effective and applicable in large container inspection systems

  8. [Large vessels vasculopathy in systemic sclerosis].

    Science.gov (United States)

    Tejera Segura, Beatriz; Ferraz-Amaro, Iván

    2015-12-07

    Vasculopathy in systemic sclerosis is a severe, in many cases irreversible, manifestation that can lead to amputation. While the classical clinical manifestations of the disease have to do with the involvement of microcirculation, proximal vessels of upper and lower limbs can also be affected. This involvement of large vessels may be related to systemic sclerosis, vasculitis or atherosclerotic, and the differential diagnosis is not easy. To conduct a proper and early diagnosis, it is essential to start prompt appropriate treatment. In this review, we examine the involvement of large vessels in scleroderma, an understudied manifestation with important prognostic and therapeutic implications. Copyright © 2015 Elsevier España, S.L.U. All rights reserved.

  9. Knowledge based economy in European Union

    Directory of Open Access Journals (Sweden)

    Ecaterina Stănculescu

    2012-04-01

    Full Text Available Nowadays we assist at a fundamental change from the economy based mainly on resources to the one based mostly on knowledge. The concept has been launched in the last decade of the past century. The knowledge became a production agent and a value creation instrument for whatever country and of course for an entire community like European Union which is constantly concerned by its development and competitiveness. This paper presents the principal characteristics of the present EU preoccupations with the expansion of a knowledge based economy through the 2020 European Development Strategy for smart, sustainable and inclusive economy, and especially for the Framework Programs (Framework Programme 7 and Competitiveness and Innovation Framework Programme.

  10. Energy cascading in large district heating systems

    International Nuclear Information System (INIS)

    Mayer, F.W.

    1978-01-01

    District heat transfer is the most economical utilization of the waste heat of power plants. Optimum utilization and heat transfer over large distances are possible because of a new energy distribution system, the ''energy cascading system,'' in which heat is transferred to several consumer regions at different temperature ranges. It is made more profitable by the use of heat pumps. The optimum flow-line temperature is 368 0 K, and the optimum return-line temperature is 288 0 K, resulting in an approximately 50% reduction of electric power loss at the power plant

  11. Large Efficient Intelligent Heating Relay Station System

    Science.gov (United States)

    Wu, C. Z.; Wei, X. G.; Wu, M. Q.

    2017-12-01

    The design of large efficient intelligent heating relay station system aims at the improvement of the existing heating system in our country, such as low heating efficiency, waste of energy and serious pollution, and the control still depends on the artificial problem. In this design, we first improve the existing plate heat exchanger. Secondly, the ATM89C51 is used to control the whole system and realize the intelligent control. The detection part is using the PT100 temperature sensor, pressure sensor, turbine flowmeter, heating temperature, detection of user end liquid flow, hydraulic, and real-time feedback, feedback signal to the microcontroller through the heating for users to adjust, realize the whole system more efficient, intelligent and energy-saving.

  12. Large Coil Program magnetic system design study

    International Nuclear Information System (INIS)

    Moses, S.D.; Johnson, N.E.

    1977-01-01

    The primary objective of the Large Coil Program (LCP) is to demonstrate the reliable operation of large superconducting coils to provide a basis for the design principles, materials, and fabrication techniques proposed for the toroidal magnets for the THE NEXT STEP (TNS) and other future tokamak devices. This paper documents a design study of the Large Coil Test Facility (LCTF) in which the structural response of the Toroidal Field (TF) Coils and the supporting structure was evaluated under simulated reactor conditions. The LCP test facility structural system consists of six TF Coils, twelve coil-to-coil torsional restraining beams (torque rings), a central bucking post with base, and a Pulse Coil system. The NASTRAN Finite Element Structural Analysis computer Code was utilized to determine the distribution of deflections, forces, and stresses for each of the TF Coils, torque rings, and the central bucking post. Eleven load conditions were selected to represent probable test operations. Pulse Coils suspended in the bore of the test coil were energized to simulate the pulsed field environment characteristic of the TNS reactor system. The TORMAC Computer Code was utilized to develop the magnetic forces in the TF Coils for each of the eleven loading conditions examined, with or without the Pulse Coils energized. The TORMAC computer program output forces were used directly as input load conditions for the NASTRAN analyses. Results are presented which demonstrate the reliability of the LCTF under simulated reactor operating conditions

  13. Status: Large-scale subatmospheric cryogenic systems

    International Nuclear Information System (INIS)

    Peterson, T.

    1989-01-01

    In the late 1960's and early 1970's an interest in testing and operating RF cavities at 1.8K motivated the development and construction of four large (300 Watt) 1.8K refrigeration systems. in the past decade, development of successful superconducting RF cavities and interest in obtaining higher magnetic fields with the improved Niobium-Titanium superconductors has once again created interest in large-scale 1.8K refrigeration systems. The L'Air Liquide plant for Tore Supra is a recently commissioned 300 Watt 1.8K system which incorporates new technology, cold compressors, to obtain the low vapor pressure for low temperature cooling. CEBAF proposes to use cold compressors to obtain 5KW at 2.0K. Magnetic refrigerators of 10 Watt capacity or higher at 1.8K are now being developed. The state of the art of large-scale refrigeration in the range under 4K will be reviewed. 28 refs., 4 figs., 7 tabs

  14. The Development of the IMIA Knowledge Base

    Directory of Open Access Journals (Sweden)

    Graham Wright

    2011-03-01

    Full Text Available Background: The discipline of health or medical informatics is relatively new in that the literature has existed for only 40 years. The British Computer Society (BCS health group was of the opinion that work should be undertaken to explore the scope of medical or health informatics. Once the mapping work was completed the International Medical Informatics Association (IMIA expressed the wish to develop it further to define the knowledge base of the discipline and produce a comprehensive internationally applicable framework. This article will also highlight the move from the expert opinion of a small group to the analysis of publications to generalise and refine the initial findings, and illustrate the importance of triangulation.Objectives: The aim of the project was to explore the theoretical constructs underpinning the discipline of health informatics and produce a cognitive map of the existing understanding of the discipline and develop the knowledge base of health informatics for the IMIA and the BCS.Method: The five-phase project, described in this article, undertaken to define the discipline of health informatics used four forms of triangulation.Results: The output from the project is a framework giving the 14 major headings (Subjects and 245 elements, which together describe the current perception of the discipline of health informatics.Conclusion: This article describes how each phase of the project was strengthened, through using triangulation within and between the different phases. This was done to ensure that the investigators could be confident in the confirmation and completeness of data, and assured of the validity and reliability of the final output of the ‘IMIA Knowledge Base’ that was endorsed by the IMIA Board in November 2009.

  15. Construction of a large laser fusion system

    International Nuclear Information System (INIS)

    Hurley, C.A.

    1977-01-01

    Construction of a large laser fusion machine is nearing completion at the Lawrence Livermore Laboratory (LLL). Shiva, a 20-terawatt neodymium doped glass system, will be complete in early 1978. This system will have the high power needed to demonstrate significant thermonuclear burn. Shiva will irradiate a microscopic D-T pellet with 20 separate laser beams arriving simultaneously at the target. This requires precise alignment, and stability to maintain alignment. Hardware for the 20 laser chains is composed of 140 amplifiers, 100 spatial filters, 80 isolation stages, 40 large turning mirrors, and a front-end splitter system of over 100 parts. These are mounted on a high stability, three dimensional spaceframe which serves as an optical bench. The mechanical design effort, spanning approximately 3 years, followed a classic engineering evolution. The conceptual design phase led directly to system optimization through cost and technical tradeoffs. Additional manpower was then required for detailed design and specification of hardware and fabrication. Design of long-lead items was started early in order to initiate fabrication and assembly while the rest of the design was completed. All components were ready for assembly and construction as fiscal priorities and schedules permitted

  16. Engineering management of large scale systems

    Science.gov (United States)

    Sanders, Serita; Gill, Tepper L.; Paul, Arthur S.

    1989-01-01

    The organization of high technology and engineering problem solving, has given rise to an emerging concept. Reasoning principles for integrating traditional engineering problem solving with system theory, management sciences, behavioral decision theory, and planning and design approaches can be incorporated into a methodological approach to solving problems with a long range perspective. Long range planning has a great potential to improve productivity by using a systematic and organized approach. Thus, efficiency and cost effectiveness are the driving forces in promoting the organization of engineering problems. Aspects of systems engineering that provide an understanding of management of large scale systems are broadly covered here. Due to the focus and application of research, other significant factors (e.g., human behavior, decision making, etc.) are not emphasized but are considered.

  17. Pulsed rf systems for large storage rings

    International Nuclear Information System (INIS)

    Wilson, P.B.

    1979-03-01

    The possibility is considered that by using a pulsed rf system a substantial reduction can be made in the rf power requirement for the next generation of large storage rings. For a ring with a sufficiently large circumference, the time between bunch passages, T/sub b/, can exceed the cavity filling time, T/sub f/. As the ratio T/sub b//T/sub f/ increases, it is clear that at some point the average power requirement can be reduced by pulsing the rf to the cavities. In this mode of operation, the rf power is turned on a filling time or so before the arrival of a bunch and is switched off again at the time of bunch passage. There is no rf energy in the accelerating structure, and hence no power dissipation, for most of the period between bunches

  18. Mindtagger: A Demonstration of Data Labeling in Knowledge Base Construction.

    Science.gov (United States)

    Shin, Jaeho; Ré, Christopher; Cafarella, Michael

    2015-08-01

    End-to-end knowledge base construction systems using statistical inference are enabling more people to automatically extract high-quality domain-specific information from unstructured data. As a result of deploying DeepDive framework across several domains, we found new challenges in debugging and improving such end-to-end systems to construct high-quality knowledge bases. DeepDive has an iterative development cycle in which users improve the data. To help our users, we needed to develop principles for analyzing the system's error as well as provide tooling for inspecting and labeling various data products of the system. We created guidelines for error analysis modeled after our colleagues' best practices, in which data labeling plays a critical role in every step of the analysis. To enable more productive and systematic data labeling, we created Mindtagger, a versatile tool that can be configured to support a wide range of tasks. In this demonstration, we show in detail what data labeling tasks are modeled in our error analysis guidelines and how each of them is performed using Mindtagger.

  19. Optical interconnect for large-scale systems

    Science.gov (United States)

    Dress, William

    2013-02-01

    This paper presents a switchless, optical interconnect module that serves as a node in a network of identical distribution modules for large-scale systems. Thousands to millions of hosts or endpoints may be interconnected by a network of such modules, avoiding the need for multi-level switches. Several common network topologies are reviewed and their scaling properties assessed. The concept of message-flow routing is discussed in conjunction with the unique properties enabled by the optical distribution module where it is shown how top-down software control (global routing tables, spanning-tree algorithms) may be avoided.

  20. Scalable Molecular Dynamics for Large Biomolecular Systems

    Directory of Open Access Journals (Sweden)

    Robert K. Brunner

    2000-01-01

    Full Text Available We present an optimized parallelization scheme for molecular dynamics simulations of large biomolecular systems, implemented in the production-quality molecular dynamics program NAMD. With an object-based hybrid force and spatial decomposition scheme, and an aggressive measurement-based predictive load balancing framework, we have attained speeds and speedups that are much higher than any reported in literature so far. The paper first summarizes the broad methodology we are pursuing, and the basic parallelization scheme we used. It then describes the optimizations that were instrumental in increasing performance, and presents performance results on benchmark simulations.

  1. Modular pump limiter systems for large tokamaks

    International Nuclear Information System (INIS)

    Uckan, T.; Klepper, C.C.; Mioduszewski, P.K.; McGrath, R.T.

    1987-09-01

    Long-pulse (>10-s) operation of large tokamaks with high-power (>10-MW) heating and extensive external fueling will require correspondingly efficient particle exhaust for density control. A pump limiter can provide the needed exhaust capability by removing a small percentage of the particles, which would otherwise be recycled. Single pump limiter modules have been operated successfully on ISX-B, PDX, TEXTOR, and PLT. An axisymmetric pump limiter is now being installed and will be studied in TEXTOR. A third type of pump limiter is a system that consists of several modules and exhibits performance different from that of a single module. To take advantage of the flexibility of a modular pump limiter system in a high-power, long-pulse device, the power load must be distributed among a number of modules. Because each added module changes the performance of all the others, a set of design criteria must be defined for the overall limiter system. The design parameters for the modules are then determined from the system requirements for particle and power removal. Design criteria and parameters are presented, and the impact on module design of the state of the art in engineering technology is discussed. The relationship between modules are considered from the standpoint of flux coverage and shadowing effects. The results are applied to the Tore Supra tokamak. A preliminary conceptual design for the Tore Supra pump limiter system is discussed, and the design parameters of the limiter modules are presented. 21 refs., 12 figs

  2. An Ebola virus-centered knowledge base

    Science.gov (United States)

    Kamdar, Maulik R.; Dumontier, Michel

    2015-01-01

    Ebola virus (EBOV), of the family Filoviridae viruses, is a NIAID category A, lethal human pathogen. It is responsible for causing Ebola virus disease (EVD) that is a severe hemorrhagic fever and has a cumulative death rate of 41% in the ongoing epidemic in West Africa. There is an ever-increasing need to consolidate and make available all the knowledge that we possess on EBOV, even if it is conflicting or incomplete. This would enable biomedical researchers to understand the molecular mechanisms underlying this disease and help develop tools for efficient diagnosis and effective treatment. In this article, we present our approach for the development of an Ebola virus-centered Knowledge Base (Ebola-KB) using Linked Data and Semantic Web Technologies. We retrieve and aggregate knowledge from several open data sources, web services and biomedical ontologies. This knowledge is transformed to RDF, linked to the Bio2RDF datasets and made available through a SPARQL 1.1 Endpoint. Ebola-KB can also be explored using an interactive Dashboard visualizing the different perspectives of this integrated knowledge. We showcase how different competency questions, asked by domain users researching the druggability of EBOV, can be formulated as SPARQL Queries or answered using the Ebola-KB Dashboard. Database URL: http://ebola.semanticscience.org. PMID:26055098

  3. An Ebola virus-centered knowledge base.

    Science.gov (United States)

    Kamdar, Maulik R; Dumontier, Michel

    2015-01-01

    Ebola virus (EBOV), of the family Filoviridae viruses, is a NIAID category A, lethal human pathogen. It is responsible for causing Ebola virus disease (EVD) that is a severe hemorrhagic fever and has a cumulative death rate of 41% in the ongoing epidemic in West Africa. There is an ever-increasing need to consolidate and make available all the knowledge that we possess on EBOV, even if it is conflicting or incomplete. This would enable biomedical researchers to understand the molecular mechanisms underlying this disease and help develop tools for efficient diagnosis and effective treatment. In this article, we present our approach for the development of an Ebola virus-centered Knowledge Base (Ebola-KB) using Linked Data and Semantic Web Technologies. We retrieve and aggregate knowledge from several open data sources, web services and biomedical ontologies. This knowledge is transformed to RDF, linked to the Bio2RDF datasets and made available through a SPARQL 1.1 Endpoint. Ebola-KB can also be explored using an interactive Dashboard visualizing the different perspectives of this integrated knowledge. We showcase how different competency questions, asked by domain users researching the druggability of EBOV, can be formulated as SPARQL Queries or answered using the Ebola-KB Dashboard. © The Author(s) 2015. Published by Oxford University Press.

  4. The Development of the IMIA Knowledge Base

    Directory of Open Access Journals (Sweden)

    Graham Wright

    2011-10-01

    Objectives: The aim of the project was to explore the theoretical constructs underpinning the discipline of health informatics and produce a cognitive map of the existing understanding of the discipline and develop the knowledge base of health informatics for the IMIA and the BCS. Method: The five-phase project, described in this article, undertaken to define the discipline of health informatics used four forms of triangulation. Results: The output from the project is a framework giving the 14 major headings (Subjects and 245 elements, which together describe the current perception of the discipline of health informatics. Conclusion: This article describes how each phase of the project was strengthened, through using triangulation within and between the different phases. This was done to ensure that the investigators could be confident in the confirmation and completeness of data, and assured of the validity and reliability of the final output of the ‘IMIA Knowledge Base’ that was endorsed by the IMIA Board in November 2009.

  5. Large-scale modelling of neuronal systems

    International Nuclear Information System (INIS)

    Castellani, G.; Verondini, E.; Giampieri, E.; Bersani, F.; Remondini, D.; Milanesi, L.; Zironi, I.

    2009-01-01

    The brain is, without any doubt, the most, complex system of the human body. Its complexity is also due to the extremely high number of neurons, as well as the huge number of synapses connecting them. Each neuron is capable to perform complex tasks, like learning and memorizing a large class of patterns. The simulation of large neuronal systems is challenging for both technological and computational reasons, and can open new perspectives for the comprehension of brain functioning. A well-known and widely accepted model of bidirectional synaptic plasticity, the BCM model, is stated by a differential equation approach based on bistability and selectivity properties. We have modified the BCM model extending it from a single-neuron to a whole-network model. This new model is capable to generate interesting network topologies starting from a small number of local parameters, describing the interaction between incoming and outgoing links from each neuron. We have characterized this model in terms of complex network theory, showing how this, learning rule can be a support For network generation.

  6. Health Care Leadership: Managing Knowledge Bases as Stakeholders.

    Science.gov (United States)

    Rotarius, Timothy

    Communities are composed of many organizations. These organizations naturally form clusters based on common patterns of knowledge, skills, and abilities of the individual organizations. Each of these spontaneous clusters represents a distinct knowledge base. The health care knowledge base is shown to be the natural leader of any community. Using the Central Florida region's 5 knowledge bases as an example, each knowledge base is categorized as a distinct type of stakeholder, and then a specific stakeholder management strategy is discussed to facilitate managing both the cooperative potential and the threatening potential of each "knowledge base" stakeholder.

  7. Knowledge-based simulation using object-oriented programming

    Science.gov (United States)

    Sidoran, Karen M.

    1993-01-01

    Simulations have become a powerful mechanism for understanding and modeling complex phenomena. Their results have had substantial impact on a broad range of decisions in the military, government, and industry. Because of this, new techniques are continually being explored and developed to make them even more useful, understandable, extendable, and efficient. One such area of research is the application of the knowledge-based methods of artificial intelligence (AI) to the computer simulation field. The goal of knowledge-based simulation is to facilitate building simulations of greatly increased power and comprehensibility by making use of deeper knowledge about the behavior of the simulated world. One technique for representing and manipulating knowledge that has been enhanced by the AI community is object-oriented programming. Using this technique, the entities of a discrete-event simulation can be viewed as objects in an object-oriented formulation. Knowledge can be factual (i.e., attributes of an entity) or behavioral (i.e., how the entity is to behave in certain circumstances). Rome Laboratory's Advanced Simulation Environment (RASE) was developed as a research vehicle to provide an enhanced simulation development environment for building more intelligent, interactive, flexible, and realistic simulations. This capability will support current and future battle management research and provide a test of the object-oriented paradigm for use in large scale military applications.

  8. Maximizing the knowledge base: Knowledge Base+ and the Global Open Knowledgebase

    Directory of Open Access Journals (Sweden)

    Liam Earney

    2013-11-01

    Full Text Available The motivation for the two projects discussed in this article is the simple premise that the current inaccuracies of data in the library supply chain are detrimental to the user experience, limit the ability of institutions to effectively manage their collections and that resolving them is increasingly unsustainable at the institutional level. Two projects, Knowledge Base+ (KB+ in the UK and Global Open Knowledgebase (GOKb in the USA, are working in cooperation with a range of other partners, and adopting a communitycentric approach to address these issues and broaden the scope and utility of knowledge bases more generally. The belief is that only through collaboration at a wide range of levels and on a number of fronts can these challenges be overcome.

  9. THE DESIGN OF KNOWLEDGE BASE FOR SURFACE RELATIONS BASED PART RECOGNITION APPROACH

    Directory of Open Access Journals (Sweden)

    Adem ÇİÇEK

    2007-01-01

    Full Text Available In this study, a new knowledge base for an expert system used in part recognition algorithm has been designed. Parts are recognized by the computer program by comparing face adjacency relations and attributes belonging to each part represented in the rules in the knowledge base developed with face adjacency relations and attributes generated from STEP file of the part. Besides, rule writing process has been quite simplified by generating the rules represented in the knowledge base with an automatic rule writing module developed within the system. With the knowledge base and automatic rule writing module used in the part recognition system, simple, intermediate and complex parts can be recognized by a part recognition program.

  10. Verification of product design using regulation knowledge base and Web services

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ik June [KAERI, Daejeon (Korea, Republic of); Lee, Jae Chul; Mun Du Hwan [Kyungpook National University, Daegu (Korea, Republic of); Kim, Byung Chul [Dong-A University, Busan (Korea, Republic of); Hwang, Jin Sang [PartDB Co., Ltd., Daejeom (Korea, Republic of); Lim, Chae Ho [Korea Institute of Industrial Technology, Incheon (Korea, Republic of)

    2015-11-15

    Since product regulations contain important rules or codes that manufacturers must follow, automatic verification of product design with the regulations related to a product is necessary. For this, this study presents a new method for the verification of product design using regulation knowledge base and Web services. Regulation knowledge base consisting of product ontology and rules was built with a hybrid technique combining ontology and programming languages. Web service for design verification was developed ensuring the flexible extension of knowledge base. By virtue of two technical features, design verification is served to various products while the change of system architecture is minimized.

  11. Verification of product design using regulation knowledge base and Web services

    International Nuclear Information System (INIS)

    Kim, Ik June; Lee, Jae Chul; Mun Du Hwan; Kim, Byung Chul; Hwang, Jin Sang; Lim, Chae Ho

    2015-01-01

    Since product regulations contain important rules or codes that manufacturers must follow, automatic verification of product design with the regulations related to a product is necessary. For this, this study presents a new method for the verification of product design using regulation knowledge base and Web services. Regulation knowledge base consisting of product ontology and rules was built with a hybrid technique combining ontology and programming languages. Web service for design verification was developed ensuring the flexible extension of knowledge base. By virtue of two technical features, design verification is served to various products while the change of system architecture is minimized.

  12. Autonomous Cryogenic Load Operations: Knowledge-Based Autonomous Test Engineer

    Science.gov (United States)

    Schrading, J. Nicolas

    2013-01-01

    The Knowledge-Based Autonomous Test Engineer (KATE) program has a long history at KSC. Now a part of the Autonomous Cryogenic Load Operations (ACLO) mission, this software system has been sporadically developed over the past 20 years. Originally designed to provide health and status monitoring for a simple water-based fluid system, it was proven to be a capable autonomous test engineer for determining sources of failure in the system. As part of a new goal to provide this same anomaly-detection capability for a complicated cryogenic fluid system, software engineers, physicists, interns and KATE experts are working to upgrade the software capabilities and graphical user interface. Much progress was made during this effort to improve KATE. A display of the entire cryogenic system's graph, with nodes for components and edges for their connections, was added to the KATE software. A searching functionality was added to the new graph display, so that users could easily center their screen on specific components. The GUI was also modified so that it displayed information relevant to the new project goals. In addition, work began on adding new pneumatic and electronic subsystems into the KATE knowledge base, so that it could provide health and status monitoring for those systems. Finally, many fixes for bugs, memory leaks, and memory errors were implemented and the system was moved into a state in which it could be presented to stakeholders. Overall, the KATE system was improved and necessary additional features were added so that a presentation of the program and its functionality in the next few months would be a success.

  13. Sequential decoders for large MIMO systems

    KAUST Repository

    Ali, Konpal S.

    2014-05-01

    Due to their ability to provide high data rates, multiple-input multiple-output (MIMO) systems have become increasingly popular. Decoding of these systems with acceptable error performance is computationally very demanding. In this paper, we employ the Sequential Decoder using the Fano Algorithm for large MIMO systems. A parameter called the bias is varied to attain different performance-complexity trade-offs. Low values of the bias result in excellent performance but at the expense of high complexity and vice versa for higher bias values. Numerical results are done that show moderate bias values result in a decent performance-complexity trade-off. We also attempt to bound the error by bounding the bias, using the minimum distance of a lattice. The variations in complexity with SNR have an interesting trend that shows room for considerable improvement. Our work is compared against linear decoders (LDs) aided with Element-based Lattice Reduction (ELR) and Complex Lenstra-Lenstra-Lovasz (CLLL) reduction. © 2014 IFIP.

  14. Large-scale digitizer system, analog converters

    International Nuclear Information System (INIS)

    Althaus, R.F.; Lee, K.L.; Kirsten, F.A.; Wagner, L.J.

    1976-10-01

    Analog to digital converter circuits that are based on the sharing of common resources, including those which are critical to the linearity and stability of the individual channels, are described. Simplicity of circuit composition is valued over other more costly approaches. These are intended to be applied in a large-scale processing and digitizing system for use with high-energy physics detectors such as drift-chambers or phototube-scintillator arrays. Signal distribution techniques are of paramount importance in maintaining adequate signal-to-noise ratio. Noise in both amplitude and time-jitter senses is held sufficiently low so that conversions with 10-bit charge resolution and 12-bit time resolution are achieved

  15. A knowledge-based approach to the evaluation of fault trees

    International Nuclear Information System (INIS)

    Hwang, Yann-Jong; Chow, Louis R.; Huang, Henry C.

    1996-01-01

    A list of critical components is useful for determining the potential problems of a complex system. However, to find this list through evaluating the fault trees is expensive and time consuming. This paper intends to propose an integrated software program which consists of a fault tree constructor, a knowledge base, and an efficient algorithm for evaluating minimal cut sets of a large fault tree. The proposed algorithm uses the approaches of top-down heuristic searching and the probability-based truncation. That makes the evaluation of fault trees obviously efficient and provides critical components for solving the potential problems in complex systems. Finally, some practical fault trees are included to illustrate the results

  16. Large-scale stochasticity in Hamiltonian systems

    International Nuclear Information System (INIS)

    Escande, D.F.

    1982-01-01

    Large scale stochasticity (L.S.S.) in Hamiltonian systems is defined on the paradigm Hamiltonian H(v,x,t) =v 2 /2-M cos x-P cos k(x-t) which describes the motion of one particle in two electrostatic waves. A renormalization transformation Tsub(r) is described which acts as a microscope that focusses on a given KAM (Kolmogorov-Arnold-Moser) torus in phase space. Though approximate, Tsub(r) yields the threshold of L.S.S. in H with an error of 5-10%. The universal behaviour of KAM tori is predicted: for instance the scale invariance of KAM tori and the critical exponent of the Lyapunov exponent of Cantori. The Fourier expansion of KAM tori is computed and several conjectures by L. Kadanoff and S. Shenker are proved. Chirikov's standard mapping for stochastic layers is derived in a simpler way and the width of the layers is computed. A simpler renormalization scheme for these layers is defined. A Mathieu equation for describing the stability of a discrete family of cycles is derived. When combined with Tsub(r), it allows to prove the link between KAM tori and nearby cycles, conjectured by J. Greene and, in particular, to compute the mean residue of a torus. The fractal diagrams defined by G. Schmidt are computed. A sketch of a methodology for computing the L.S.S. threshold in any two-degree-of-freedom Hamiltonian system is given. (Auth.)

  17. SLAP, Large Sparse Linear System Solution Package

    International Nuclear Information System (INIS)

    Greenbaum, A.

    1987-01-01

    1 - Description of program or function: SLAP is a set of routines for solving large sparse systems of linear equations. One need not store the entire matrix - only the nonzero elements and their row and column numbers. Any nonzero structure is acceptable, so the linear system solver need not be modified when the structure of the matrix changes. Auxiliary storage space is acquired and released within the routines themselves by use of the LRLTRAN POINTER statement. 2 - Method of solution: SLAP contains one direct solver, a band matrix factorization and solution routine, BAND, and several interactive solvers. The iterative routines are as follows: JACOBI, Jacobi iteration; GS, Gauss-Seidel Iteration; ILUIR, incomplete LU decomposition with iterative refinement; DSCG and ICCG, diagonal scaling and incomplete Cholesky decomposition with conjugate gradient iteration (for symmetric positive definite matrices only); DSCGN and ILUGGN, diagonal scaling and incomplete LU decomposition with conjugate gradient interaction on the normal equations; DSBCG and ILUBCG, diagonal scaling and incomplete LU decomposition with bi-conjugate gradient iteration; and DSOMN and ILUOMN, diagonal scaling and incomplete LU decomposition with ORTHOMIN iteration

  18. Knowledge-Based Environmental Context Modeling

    Science.gov (United States)

    Pukite, P. R.; Challou, D. J.

    2017-12-01

    As we move from the oil-age to an energy infrastructure based on renewables, the need arises for new educational tools to support the analysis of geophysical phenomena and their behavior and properties. Our objective is to present models of these phenomena to make them amenable for incorporation into more comprehensive analysis contexts. Starting at the level of a college-level computer science course, the intent is to keep the models tractable and therefore practical for student use. Based on research performed via an open-source investigation managed by DARPA and funded by the Department of Interior [1], we have adapted a variety of physics-based environmental models for a computer-science curriculum. The original research described a semantic web architecture based on patterns and logical archetypal building-blocks (see figure) well suited for a comprehensive environmental modeling framework. The patterns span a range of features that cover specific land, atmospheric and aquatic domains intended for engineering modeling within a virtual environment. The modeling engine contained within the server relied on knowledge-based inferencing capable of supporting formal terminology (through NASA JPL's Semantic Web for Earth and Environmental Technology (SWEET) ontology and a domain-specific language) and levels of abstraction via integrated reasoning modules. One of the key goals of the research was to simplify models that were ordinarily computationally intensive to keep them lightweight enough for interactive or virtual environment contexts. The breadth of the elements incorporated is well-suited for learning as the trend toward ontologies and applying semantic information is vital for advancing an open knowledge infrastructure. As examples of modeling, we have covered such geophysics topics as fossil-fuel depletion, wind statistics, tidal analysis, and terrain modeling, among others. Techniques from the world of computer science will be necessary to promote efficient

  19. A NASA/RAE cooperation in the development of a real-time knowledge based autopilot

    Science.gov (United States)

    Daysh, Colin; Corbin, Malcolm; Butler, Geoff; Duke, Eugene L.; Belle, Steven D.; Brumbaugh, Randal W.

    1991-01-01

    As part of a US/UK cooperative aeronautical research program, a joint activity between NASA-Ames and the Royal Aerospace Establishment on Knowledge Based Systems (KBS) was established. This joint activity is concerned with tools and techniques for the implementation and validation of real-time KBS. The proposed next stage of the research is described, in which some of the problems of implementing and validating a Knowledge Based Autopilot (KBAP) for a generic high performance aircraft will be studied.

  20. Viewing Systems for Large Underground Storage Tanks

    International Nuclear Information System (INIS)

    Heckendorn, F.M.; Robinson, C.W.; Anderson, E.K.; Pardini, A.F.

    1996-01-01

    Specialized remote video systems have been successfully developed and deployed in a number of large radiological Underground Storage Tanks (USTs)that tolerate the hostile tank interior, while providing high resolution video to a remotely located operator. The deployment is through 100 mm (4 in) tank openings, while incorporating full video functions of the camera, lights, and zoom lens. The usage of remote video minimizes the potential for personnel exposure to radiological and hazardous conditions, and maximizes the quality of the visual data used to assess the interior conditions of both tank and contents. The robustness of this type of remote system has a direct effect on the potential for radiological exposure that personnel may encounter. The USTs typical of the Savannah River and Hanford Department Of Energy - (DOE) sites are typically 4.5 million liter (1.2 million gal) units under earth. or concrete overburden with limited openings to the surface. The interior is both highly contaminated and radioactive with a wide variety of nuclear processing waste material. Some of the tanks are -flammable rated -to Class 1, Division 1,and personnel presence at or near the openings should be minimized. The interior of these USTs must be assessed periodically as part of the ongoing management of the tanks and as a step towards tank remediation. The systems are unique in their deployment technology, which virtually eliminates the potential for entrapment in a tank, and their ability to withstand flammable environments. A multiplicity of components used within a common packaging allow for cost effective and appropriate levels of technology, with radiation hardened components on some units and lesser requirements on other units. All units are completely self contained for video, zoom lens, lighting, deployment,as well as being self purging, and modular in construction

  1. Knowledge-based requirements analysis for automating software development

    Science.gov (United States)

    Markosian, Lawrence Z.

    1988-01-01

    We present a new software development paradigm that automates the derivation of implementations from requirements. In this paradigm, informally-stated requirements are expressed in a domain-specific requirements specification language. This language is machine-understable and requirements expressed in it are captured in a knowledge base. Once the requirements are captured, more detailed specifications and eventually implementations are derived by the system using transformational synthesis. A key characteristic of the process is that the required human intervention is in the form of providing problem- and domain-specific engineering knowledge, not in writing detailed implementations. We describe a prototype system that applies the paradigm in the realm of communication engineering: the prototype automatically generates implementations of buffers following analysis of the requirements on each buffer.

  2. A knowledge-based assistant for valve maintenance planning

    International Nuclear Information System (INIS)

    Winter, M.J.; Danofsky, R.A.; Spinrad, B.I.; Howard, K.

    1987-01-01

    A knowledge-based program is being developed to assist engineers in maintenance planning for safety related, motor-operated valves at a boiling water reactor. The purpose of this project is to develop the general framework for a prototype system that demonstrates the capabilities for diagnosing valve symptoms and prescribing corrective maintenance, completing a portion of the Corrective Maintenance Action Request (CMAR) form which must be prepared for each job, and managing an interactive valve data base. Minimizing user input and providing output in a form that is familiar to the maintenance planning engineer are important goals for the program. This paper describes the present features of the valve maintenance advisory system which is currently being tested

  3. [Artificial intelligence--the knowledge base applied to nephrology].

    Science.gov (United States)

    Sancipriano, G P

    2005-01-01

    The idea that efficacy efficiency, and quality in medicine could not be reached without sorting the huge knowledge of medical and nursing science is very common. Engineers and computer scientists have developed medical software with great prospects for success, but currently these software applications are not so useful in clinical practice. The medical doctor and the trained nurse live the 'information age' in many daily activities, but the main benefits are not so widespread in working activities. Artificial intelligence and, particularly, export systems charm health staff because of their potential. The first part of this paper summarizes the characteristics of 'weak artificial intelligence' and of expert systems important in clinical practice. The second part discusses medical doctors' requirements and the current nephrologic knowledge bases available for artificial intelligence development.

  4. Advanced software development workstation. Knowledge base design: Design of knowledge base for flight planning application

    Science.gov (United States)

    Izygon, Michel E.

    1992-01-01

    The development process of the knowledge base for the generation of Test Libraries for Mission Operations Computer (MOC) Command Support focused on a series of information gathering interviews. These knowledge capture sessions are supporting the development of a prototype for evaluating the capabilities of INTUIT on such an application. the prototype includes functions related to POCC (Payload Operation Control Center) processing. It prompts the end-users for input through a series of panels and then generates the Meds associated with the initialization and the update of hazardous command tables for a POCC Processing TLIB.

  5. Design of Knowledge Bases for Plant Gene Regulatory Networks.

    Science.gov (United States)

    Mukundi, Eric; Gomez-Cano, Fabio; Ouma, Wilberforce Zachary; Grotewold, Erich

    2017-01-01

    Developing a knowledge base that contains all the information necessary for the researcher studying gene regulation in a particular organism can be accomplished in four stages. This begins with defining the data scope. We describe here the necessary information and resources, and outline the methods for obtaining data. The second stage consists of designing the schema, which involves defining the entire arrangement of the database in a systematic plan. The third stage is the implementation, defined by actualization of the database by using software according to a predefined schema. The final stage is development, where the database is made available to users in a web-accessible system. The result is a knowledgebase that integrates all the information pertaining to gene regulation, and which is easily expandable and transferable.

  6. TMS for Instantiating a Knowledge Base With Incomplete Data

    Science.gov (United States)

    James, Mark

    2007-01-01

    A computer program that belongs to the class known among software experts as output truth-maintenance-systems (output TMSs) has been devised as one of a number of software tools for reducing the size of the knowledge base that must be searched during execution of artificial- intelligence software of the rule-based inference-engine type in a case in which data are missing. This program determines whether the consequences of activation of two or more rules can be combined without causing a logical inconsistency. For example, in a case involving hypothetical scenarios that could lead to turning a given device on or off, the program determines whether a scenario involving a given combination of rules could lead to turning the device both on and off at the same time, in which case that combination of rules would not be included in the scenario.

  7. Environmental effects and large space systems

    Science.gov (United States)

    Garrett, H. B.

    1981-01-01

    When planning large scale operations in space, environmental impact must be considered in addition to radiation, spacecraft charging, contamination, high power and size. Pollution of the atmosphere and space is caused by rocket effluents and by photoelectrons generated by sunlight falling on satellite surfaces even light pollution may result (the SPS may reflect so much light as to be a nuisance to astronomers). Large (100 Km 2) structures also will absorb the high energy particles that impinge on them. Altogether, these effects may drastically alter the Earth's magnetosphere. It is not clear if these alterations will in any way affect the Earth's surface climate. Large structures will also generate large plasma wakes and waves which may cause interference with communications to the vehicle. A high energy, microwave beam from the SPS will cause ionospheric turbulence, affecting UHF and VHF communications. Although none of these effects may ultimately prove critical, they must be considered in the design of large structures.

  8. Incipient multiple fault diagnosis in real time with applications to large-scale systems

    International Nuclear Information System (INIS)

    Chung, H.Y.; Bien, Z.; Park, J.H.; Seon, P.H.

    1994-01-01

    By using a modified signed directed graph (SDG) together with the distributed artificial neutral networks and a knowledge-based system, a method of incipient multi-fault diagnosis is presented for large-scale physical systems with complex pipes and instrumentations such as valves, actuators, sensors, and controllers. The proposed method is designed so as to (1) make a real-time incipient fault diagnosis possible for large-scale systems, (2) perform the fault diagnosis not only in the steady-state case but also in the transient case as well by using a concept of fault propagation time, which is newly adopted in the SDG model, (3) provide with highly reliable diagnosis results and explanation capability of faults diagnosed as in an expert system, and (4) diagnose the pipe damage such as leaking, break, or throttling. This method is applied for diagnosis of a pressurizer in the Kori Nuclear Power Plant (NPP) unit 2 in Korea under a transient condition, and its result is reported to show satisfactory performance of the method for the incipient multi-fault diagnosis of such a large-scale system in a real-time manner

  9. Large solar energy systems within IEA task 14

    NARCIS (Netherlands)

    Geus, A.C. de; Isakson, P.; Bokhoven, T.P.; Vanoli, K.; Tepe, R.

    1996-01-01

    Within IEA Task 14 (Advanced Solar Systems) a working group was established dealing with large advanced solar energy systems (the Large Systems Working group). The goal of this working group was to generate a common base of experiences for the design and construction of advanced large solar systems.

  10. Update Knowledge Base for Long-term Core Cooling Reliability

    International Nuclear Information System (INIS)

    Agrell, Maria; Sandervag, Oddbjoern; Amri, Abdallah; ); Bang, Young S.; Blomart, Philippe; Broecker, Annette; Pointner, Winfried; Ganzmann, Ingo; Lenogue, Bruno; Guzonas, David; Herer, Christophe; Mattei, Jean-Marie; Tricottet, Matthieu; Masaoka, Hideaki; Soltesz, Vojtech; Tarkiainen, Seppo; Ui, Atsushi; Villalba, Cristina; Zigler, Gilbert

    2013-11-01

    This revision of the Knowledge Base for Emergency Core Cooling System Recirculation Reliability (NEA/CSNI/R (95)11) describes the current status (late 2012) of the knowledge base on emergency core cooling system (ECCS) and containment spray system (CSS) suction strainer performance and long-term cooling in operating power reactors. New reactors, such as the AP1000, EPR and APR1400 that are under construction in some Organization for Economic Co-operation and Development (OECD) member countries, are not addressed in detail in this revision. The containment sump (also known as the emergency or recirculation sump in pressurized water reactors (PWRs) and pressurized heavy water reactors (PHWRs) or the suppression pools or wet wells in boiling water reactors (BWRs)) and associated ECCS strainers are parts of the ECCS in both reactor types. All nuclear power plants (NPPs) are required to have an ECCS that is capable of mitigating a design basis accident (DBA). The containment sump collects reactor coolant, ECCS injection water, and containment spray solutions, if applicable, after a loss-of-coolant accident (LOCA). The sump serves as the water source to support long-term recirculation for residual heat removal, emergency core cooling, and containment atmosphere clean-up. This water source, the related pump suction inlets, and the piping between the source and inlets are important safety-related components. In addition, if fibrous material is deposited at the fuel element spacers, core cooling can be endangered. The performance of ECCS/CSS strainers was recognized many years ago as an important regulatory and safety issue. One of the primary concerns is the potential for debris generated by a jet of high-pressure coolant during a LOCA to clog the strainer and obstruct core cooling. The issue was considered resolved for all reactor types in the mid-1990s and the OECD/NEA/CSNI published report NEA/CSNI/R(95)11 in 1996 to document the state of knowledge of ECCS performance

  11. Knowledge-based engineering of a PLC controlled telescope

    Science.gov (United States)

    Pessemier, Wim; Raskin, Gert; Saey, Philippe; Van Winckel, Hans; Deconinck, Geert

    2016-08-01

    As the new control system of the Mercator Telescope is being finalized, we can review some technologies and design methodologies that are advantageous, despite their relative uncommonness in astronomical instrumentation. Particular for the Mercator Telescope is that it is controlled by a single high-end soft-PLC (Programmable Logic Controller). Using off-the-shelf components only, our distributed embedded system controls all subsystems of the telescope such as the pneumatic primary mirror support, the hydrostatic bearing, the telescope axes, the dome, the safety system, and so on. We show how real-time application logic can be written conveniently in typical PLC languages (IEC 61131-3) and in C++ (to implement the pointing kernel) using the commercial TwinCAT 3 programming environment. This software processes the inputs and outputs of the distributed system in real-time via an observatory-wide EtherCAT network, which is synchronized with high precision to an IEEE 1588 (PTP, Precision Time Protocol) time reference clock. Taking full advantage of the ability of soft-PLCs to run both real-time and non real-time software, the same device also hosts the most important user interfaces (HMIs or Human Machine Interfaces) and communication servers (OPC UA for process data, FTP for XML configuration data, and VNC for remote control). To manage the complexity of the system and to streamline the development process, we show how most of the software, electronics and systems engineering aspects of the control system have been modeled as a set of scripts written in a Domain Specific Language (DSL). When executed, these scripts populate a Knowledge Base (KB) which can be queried to retrieve specific information. By feeding the results of those queries to a template system, we were able to generate very detailed "browsable" web-based documentation about the system, but also PLC software code, Python client code, model verification reports, etc. The aim of this paper is to

  12. Knowledge-Based Approaches: Two cases of applicability

    DEFF Research Database (Denmark)

    Andersen, Tom

    1997-01-01

    Basic issues of the term: A knowledge-based approach (KBA) are discussed. Two cases of applicable to KBA are presented, and its concluded that KBA is more than just IT.......Basic issues of the term: A knowledge-based approach (KBA) are discussed. Two cases of applicable to KBA are presented, and its concluded that KBA is more than just IT....

  13. Transition to knowledge-based economy in Saudi Arabia

    NARCIS (Netherlands)

    Nour, S.

    2014-01-01

    This paper discusses the progress in transition to knowledge-based economy in Saudi Arabia. As for the methodology, this paper uses updated secondary data obtained from different sources. It uses both descriptive and comparative approaches and uses the OECD definition of knowledge-based economy and

  14. A knowledge-based approach for recognition of handwritten Pitman ...

    Indian Academy of Sciences (India)

    The paper describes a knowledge-based approach for the recognition of PSL strokes. Information about location and the direction of the starting point and final point of strokes are considered the knowledge base for recognition of strokes. The work comprises preprocessing, determination of starting and final points, ...

  15. Identifying the professional knowledge base for multi-grade teaching ...

    African Journals Online (AJOL)

    This paper reports a small-scale qualitative study of teachers and teaching principals in multi-grade rural schools in Australia, focusing on identifying the professional knowledge base required for teachers in such contexts. Such a knowledge base is essential for improving the quality of multi-grade teaching. Interviews and ...

  16. Knowledge-based public health situation awareness

    Science.gov (United States)

    Mirhaji, Parsa; Zhang, Jiajie; Srinivasan, Arunkumar; Richesson, Rachel L.; Smith, Jack W.

    2004-09-01

    There have been numerous efforts to create comprehensive databases from multiple sources to monitor the dynamics of public health and most specifically to detect the potential threats of bioterrorism before widespread dissemination. But there are not many evidences for the assertion that these systems are timely and dependable, or can reliably identify man made from natural incident. One must evaluate the value of so called 'syndromic surveillance systems' along with the costs involved in design, development, implementation and maintenance of such systems and the costs involved in investigation of the inevitable false alarms1. In this article we will introduce a new perspective to the problem domain with a shift in paradigm from 'surveillance' toward 'awareness'. As we conceptualize a rather different approach to tackle the problem, we will introduce a different methodology in application of information science, computer science, cognitive science and human-computer interaction concepts in design and development of so called 'public health situation awareness systems'. We will share some of our design and implementation concepts for the prototype system that is under development in the Center for Biosecurity and Public Health Informatics Research, in the University of Texas Health Science Center at Houston. The system is based on a knowledgebase containing ontologies with different layers of abstraction, from multiple domains, that provide the context for information integration, knowledge discovery, interactive data mining, information visualization, information sharing and communications. The modular design of the knowledgebase and its knowledge representation formalism enables incremental evolution of the system from a partial system to a comprehensive knowledgebase of 'public health situation awareness' as it acquires new knowledge through interactions with domain experts or automatic discovery of new knowledge.

  17. The Knowledge Base Interface for Parametric Grid Information

    International Nuclear Information System (INIS)

    Hipp, James R.; Simons, Randall W.; Young, Chris J.

    1999-01-01

    The parametric grid capability of the Knowledge Base (KBase) provides an efficient robust way to store and access interpolatable information that is needed to monitor the Comprehensive Nuclear Test Ban Treaty. To meet both the accuracy and performance requirements of operational monitoring systems, we use an approach which combines the error estimation of kriging with the speed and robustness of Natural Neighbor Interpolation. The method involves three basic steps: data preparation, data storage, and data access. In past presentations we have discussed in detail the first step. In this paper we focus on the latter two, describing in detail the type of information which must be stored and the interface used to retrieve parametric grid data from the Knowledge Base. Once data have been properly prepared, the information (tessellation and associated value surfaces) needed to support the interface functionality, can be entered into the KBase. The primary types of parametric grid data that must be stored include (1) generic header information; (2) base model, station, and phase names and associated ID's used to construct surface identifiers; (3) surface accounting information; (4) tessellation accounting information; (5) mesh data for each tessellation; (6) correction data defined for each surface at each node of the surfaces owning tessellation (7) mesh refinement calculation set-up and flag information; and (8) kriging calculation set-up and flag information. The eight data components not only represent the results of the data preparation process but also include all required input information for several population tools that would enable the complete regeneration of the data results if that should be necessary

  18. The Particularities of the Economic Crisis in the Knowledge-Based Society

    Directory of Open Access Journals (Sweden)

    Ion IVAN

    2011-02-01

    Full Text Available The paper presents the characteristics of the informational society and the requirements for the transition towards the knowledge based society. The informational society and the advantages it brings are described. The concepts of informatics system and informational system are described. Their roles and functions are identified. The functioning principles of the informatics systems are presented. The factors that lead to the evolution from the informational society towards the knowledge based one are identified and analyzed. The main trends in the knowledge based society are identified. For each of these trends we identify the short and long run effects and the implied consumptions of resources. Knowledge is seen in the new society as the main source of competitive advantage. Ways of transmitting knowledge are presented. The efficiency and applicability are discussed. In the knowledge based society the end-users have higher expectations regarding the products and services than before. The paper discusses the factors that lead to the structural re-equilibration in the knowledge based society. Research concepts are developed in the direction of adapting informatics applications to the target group exigencies. The paper details the quality characteristics of computer applications that are tailored to the requirements of the target group and a quality system for such applications is presented. The paper examines the benefits obtained by adapting computer applications to the target group exigencies.

  19. Artificial intelligence in process control: Knowledge base for the shuttle ECS model

    Science.gov (United States)

    Stiffler, A. Kent

    1989-01-01

    The general operation of KATE, an artificial intelligence controller, is outlined. A shuttle environmental control system (ECS) demonstration system for KATE is explained. The knowledge base model for this system is derived. An experimental test procedure is given to verify parameters in the model.

  20. EMDS users guide (version 2.0): knowledge-based decision support for ecological assessment.

    Science.gov (United States)

    Keith M. Reynolds

    1999-01-01

    The USDA Forest Service Pacific Northwest Research Station in Corvallis, Oregon, has developed the ecosystem management decision support (EMDS) system. The system integrates the logical formalism of knowledge-based reasoning into a geographic information system (GIS) environment to provide decision support for ecological landscape assessment and evaluation. The...

  1. Tourism informatics towards novel knowledge based approaches

    CERN Document Server

    Hashimoto, Kiyota; Iwamoto, Hidekazu

    2015-01-01

    This book introduces new trends of theory and practice of information technologies in tourism. The book does not handle only the fundamental contribution, but also discusses innovative and emerging technologies to promote and develop new generation tourism informatics theory and their applications. Some chapters are concerned with data analysis, web technologies, social media, and their case studies. Travel information on the web provided by travelers is very useful for other travelers make their travel plan. A chapter in this book proposes a method for interactive retrieval of information on accommodation facilities to support travelling customers in their travel preparations. Also an adaptive user interface for personalized transportation guidance system is proposed. Another chapter in this book shows a novel support system for the collaborative tourism planning by using the case reports that are collected via Internet. Also, a system for recommending hotels for the users is proposed and evaluated. Other ch...

  2. Knowledge-based control of an adaptive interface

    Science.gov (United States)

    Lachman, Roy

    1989-01-01

    The analysis, development strategy, and preliminary design for an intelligent, adaptive interface is reported. The design philosophy couples knowledge-based system technology with standard human factors approaches to interface development for computer workstations. An expert system has been designed to drive the interface for application software. The intelligent interface will be linked to application packages, one at a time, that are planned for multiple-application workstations aboard Space Station Freedom. Current requirements call for most Space Station activities to be conducted at the workstation consoles. One set of activities will consist of standard data management services (DMS). DMS software includes text processing, spreadsheets, data base management, etc. Text processing was selected for the first intelligent interface prototype because text-processing software can be developed initially as fully functional but limited with a small set of commands. The program's complexity then can be increased incrementally. The intelligent interface includes the operator's behavior and three types of instructions to the underlying application software are included in the rule base. A conventional expert-system inference engine searches the data base for antecedents to rules and sends the consequents of fired rules as commands to the underlying software. Plans for putting the expert system on top of a second application, a database management system, will be carried out following behavioral research on the first application. The intelligent interface design is suitable for use with ground-based workstations now common in government, industrial, and educational organizations.

  3. Large system change challenges: addressing complex critical issues in linked physical and social domains

    Science.gov (United States)

    Waddell, Steve; Cornell, Sarah; Hsueh, Joe; Ozer, Ceren; McLachlan, Milla; Birney, Anna

    2015-04-01

    Most action to address contemporary complex challenges, including the urgent issues of global sustainability, occurs piecemeal and without meaningful guidance from leading complex change knowledge and methods. The potential benefit of using such knowledge is greater efficacy of effort and investment. However, this knowledge and its associated tools and methods are under-utilized because understanding about them is low, fragmented between diverse knowledge traditions, and often requires shifts in mindsets and skills from expert-led to participant-based action. We have been engaged in diverse action-oriented research efforts in Large System Change for sustainability. For us, "large" systems can be characterized as large-scale systems - up to global - with many components, of many kinds (physical, biological, institutional, cultural/conceptual), operating at multiple levels, driven by multiple forces, and presenting major challenges for people involved. We see change of such systems as complex challenges, in contrast with simple or complicated problems, or chaotic situations. In other words, issues and sub-systems have unclear boundaries, interact with each other, and are often contradictory; dynamics are non-linear; issues are not "controllable", and "solutions" are "emergent" and often paradoxical. Since choices are opportunity-, power- and value-driven, these social, institutional and cultural factors need to be made explicit in any actionable theory of change. Our emerging network is sharing and building a knowledge base of experience, heuristics, and theories of change from multiple disciplines and practice domains. We will present our views on focal issues for the development of the field of large system change, which include processes of goal-setting and alignment; leverage of systemic transitions and transformation; and the role of choice in influencing critical change processes, when only some sub-systems or levels of the system behave in purposeful ways

  4. Towards Knowledge-Based Digital Libraries

    NARCIS (Netherlands)

    Feng, L.; Jeusfeld, M.A.; Hoppenbrouwers, J.

    From the standpoint of satisfying human's information needs, the current digital library (DL) systems suffer from the following two shortcomings: (i) inadequate high-level cognition support; (ii) inadequate knowledge sharing facilities. In this article, we introduce a two-layered digital library

  5. Optimization of Large-Scale Structural Systems

    DEFF Research Database (Denmark)

    Jensen, F. M.

    solutions to small problems with one or two variables to the optimization of large structures such as bridges, ships and offshore structures. The methods used for salving these problems have evolved from being classical differential calculus and calculus of variation to very advanced numerical techniques...

  6. 75 FR 21455 - Large Trader Reporting System

    Science.gov (United States)

    2010-04-23

    ... essence, a ``large trader'' would be defined as a person whose transactions in NMS securities equal or... directly or indirectly effect securities transactions.\\14\\ \\12\\ Section 13(h) of the Exchange Act defines a... term ``identifying activity level'' is defined in Section 13(h) as ``transactions in publicly traded...

  7. Knowledge-based immunosuppressive therapy for kidney transplant patients--from theoretical model to clinical integration.

    Science.gov (United States)

    Seeling, Walter; Plischke, Max; de Bruin, Jeroen S; Schuh, Christian

    2015-01-01

    Immunosuppressive therapy is a risky necessity after a patient received a kidney transplant. To reduce risks, a knowledge-based system was developed that determines the right dosage of the immunosuppresive agent Tacrolimus. A theoretical model, to classify medication blood levels as well as medication adaptions, was created using data from almost 500 patients, and over 13.000 examinations. This model was then translated into an Arden Syntax knowledge base, and integrated directly into the hospital information system of the Vienna General Hospital. In this paper we give an overview of the construction and integration of such a system.

  8. On developing a knowledge base in infancy.

    Science.gov (United States)

    Mandler, J M; McDonough, L

    1998-11-01

    The development of conceptual categories from 7 to 11 months of age was explored in 5 experiments using an object-examination task. Infants in this age range categorized the global domains of animals, vehicles, and furniture. Plants and kitchen utensils were tested at 11 months, and these domains were also categorized. When 9-month-olds were tested on kitchen utensils, they did not categorize them. Subdivisions within the animal and furniture domains were also examined. Infants did not show any subcategorization of furniture. In the animal domain both 9- and 11-month-olds responded to the life-form distinction between dogs and birds, but they did not differentiate the mammal categories of dogs and cats until 11 months. This early organization of the conceptual system into global domains that become increasingly differentiated is discussed in relation to the adult conceptual system and its breakdown in semantic dementia.

  9. Knowledge-based on-line vibration monitoring diagnose

    International Nuclear Information System (INIS)

    Johansson, L.G.; Karlsson, A.; Noeremark, A.

    1990-01-01

    ABB STAL developed some years ago a knowledge-based on-line vibration analysis system (working-name KOVA). KOVA is intended to work together with some type of vibration monitoring system, at present it is adapted to TVM 300. KOVA has no controlling function. It will only diagnose the actual situation and give the user explanations and proposals for actions to be taken. During the developing work, great experience has been gained of the features this type of system demands. This paper will present the outlines of the application and also discuss how to make diagnoses based both on general rules as well as on historical vibration cases for that particular unit (or identical units9. Another subject that this paper will outline, is the representation and evaluation of knowledge. KOVA serves as a decision-support system for the operator. Since KOVA will often give the operator more than one possible diagnosis as the cause of a fault, it is of great importance to give the operator comprehensive explanations and as many facts as possible. It is also important to rank the suggested diagnoses in some way. In KOVA these demands are effectively supported. The models and tools used to realize this functionality will be described in this paper

  10. Knowledge-based geometric modeling in construction

    DEFF Research Database (Denmark)

    Bonev, Martin; Hvam, Lars

    2012-01-01

    a considerably high amount of their recourses is required for designing and specifying the majority of their product assortment. As design decisions are hereby based on knowledge and experience about behaviour and applicability of construction techniques and materials for a predefined design situation, smart......A wider application of IT-based solutions, such as configuration systems and the implementation of modeling standards, has facilitated the trend to produce mass customized products to support inter alia the specification process of the increasing product variety. However, not all industries have...

  11. Knowledge-based analysis of microarrays for the discovery of transcriptional regulation relationships.

    Science.gov (United States)

    Seok, Junhee; Kaushal, Amit; Davis, Ronald W; Xiao, Wenzhong

    2010-01-18

    The large amount of high-throughput genomic data has facilitated the discovery of the regulatory relationships between transcription factors and their target genes. While early methods for discovery of transcriptional regulation relationships from microarray data often focused on the high-throughput experimental data alone, more recent approaches have explored the integration of external knowledge bases of gene interactions. In this work, we develop an algorithm that provides improved performance in the prediction of transcriptional regulatory relationships by supplementing the analysis of microarray data with a new method of integrating information from an existing knowledge base. Using a well-known dataset of yeast microarrays and the Yeast Proteome Database, a comprehensive collection of known information of yeast genes, we show that knowledge-based predictions demonstrate better sensitivity and specificity in inferring new transcriptional interactions than predictions from microarray data alone. We also show that comprehensive, direct and high-quality knowledge bases provide better prediction performance. Comparison of our results with ChIP-chip data and growth fitness data suggests that our predicted genome-wide regulatory pairs in yeast are reasonable candidates for follow-up biological verification. High quality, comprehensive, and direct knowledge bases, when combined with appropriate bioinformatic algorithms, can significantly improve the discovery of gene regulatory relationships from high throughput gene expression data.

  12. FROM TRADITIONAL ACCOUNTING TO KNOWLEDGE BASED ACCOUNTING ORGANIZATIONS

    Directory of Open Access Journals (Sweden)

    NICOLETA RADNEANTU

    2010-01-01

    Full Text Available Nowadays, we may observe that the rules of traditional economy have changed. The new economy – the knowledge based economy determine also major change in organizations resources, structure, strategic objectives, departments, accounting, goods. In our research we want to underline how the accounting rules, regulations and paradigms have changed to cope with political, economic and social challenges, as well as to the emergence of knowledge based organization. We also try to find out where Romanian accounting is on the hard road of evolution from traditional to knowledge based.

  13. Experiments in Knowledge Refinement for a Large Rule-Based System

    Science.gov (United States)

    1993-08-01

    empirical analysis to refine expert system knowledge bases. Aritificial Intelligence , 22:23-48, 1984. *! ...The Addison- Weslev series in artificial intelligence . Addison-Weslev. Reading, Massachusetts. 1981. Cooke, 1991: ttoger M. Cooke. Experts in...ment for classification systems. Artificial Intelligence , 35:197-226, 1988. 14 Overall, we believe that it will be possible to build a heuristic system

  14. Panorama: a targeted proteomics knowledge base.

    Science.gov (United States)

    Sharma, Vagisha; Eckels, Josh; Taylor, Greg K; Shulman, Nicholas J; Stergachis, Andrew B; Joyner, Shannon A; Yan, Ping; Whiteaker, Jeffrey R; Halusa, Goran N; Schilling, Birgit; Gibson, Bradford W; Colangelo, Christopher M; Paulovich, Amanda G; Carr, Steven A; Jaffe, Jacob D; MacCoss, Michael J; MacLean, Brendan

    2014-09-05

    Panorama is a web application for storing, sharing, analyzing, and reusing targeted assays created and refined with Skyline,1 an increasingly popular Windows client software tool for targeted proteomics experiments. Panorama allows laboratories to store and organize curated results contained in Skyline documents with fine-grained permissions, which facilitates distributed collaboration and secure sharing of published and unpublished data via a web-browser interface. It is fully integrated with the Skyline workflow and supports publishing a document directly to a Panorama server from the Skyline user interface. Panorama captures the complete Skyline document information content in a relational database schema. Curated results published to Panorama can be aggregated and exported as chromatogram libraries. These libraries can be used in Skyline to pick optimal targets in new experiments and to validate peak identification of target peptides. Panorama is open-source and freely available. It is distributed as part of LabKey Server,2 an open source biomedical research data management system. Laboratories and organizations can set up Panorama locally by downloading and installing the software on their own servers. They can also request freely hosted projects on https://panoramaweb.org , a Panorama server maintained by the Department of Genome Sciences at the University of Washington.

  15. Fire extinguishing system in large underground garages

    Directory of Open Access Journals (Sweden)

    Ivan Antonov

    2017-04-01

    Full Text Available In the work is considered an acceptable constructive scheme from a practical point of view at fire extinguishing in underground garages. The garage space is divided into quadrants which covering, for example, 2 cars. In case of ignition on one of them, a sprinkler nozzle system is triggered by the effect of the vertical convective jet. A protective curtain preventing the spread of fire to adjacent vehicles is realized. The solution is based on an integrated method which allows the calculation from hydrodynamic point of view on extinguishing time of the fire extinguishing system.

  16. Knowledge-Based Information Management for Watershed Analysis in the Pacific Northwest U.S.

    Science.gov (United States)

    Keith Reynolds; Richard Olson; Michael Saunders; Donald Latham; Michael Foster; Bruce Miller; Lawrence Bednar; Daniel Schmoldt; Patrick Cunningham; John Steffenson

    1996-01-01

    We are developing a knowledge-based information management system to provide decision support for watershed analysis in the Pacific Northwest region of the U.S. The system includes: (1) a GIS interface that allows users to graphically navigate to specific provinces and watersheds and display a variety of themes and other area-specific information, (2) an analysis...

  17. Knowledge Based Artificial Augmentation Intelligence Technology: Next Step in Academic Instructional Tools for Distance Learning

    Science.gov (United States)

    Crowe, Dale; LaPierre, Martin; Kebritchi, Mansureh

    2017-01-01

    With augmented intelligence/knowledge based system (KBS) it is now possible to develop distance learning applications to support both curriculum and administrative tasks. Instructional designers and information technology (IT) professionals are now moving from the programmable systems era that started in the 1950s to the cognitive computing era.…

  18. Knowledge-Based Information Management in Decision Support for Ecosystem Management

    Science.gov (United States)

    Keith Reynolds; Micahel Saunders; Richard Olson; Daniel Schmoldt; Michael Foster; Donald Latham; Bruce Miller; John Steffenson; Lawrence Bednar; Patrick Cunningham

    1995-01-01

    The Pacific Northwest Research Station (USDA Forest Service) is developing a knowledge-based information management system to provide decision support for watershed analysis in the Pacific Northwest region of the U.S. The decision support system includes: (1) a GIS interface that allows users to graphically navigate to specific provinces and watersheds and display a...

  19. Static and Completion Analysis for Planning Knowledge Base Development and Verification

    Science.gov (United States)

    Chien, Steve A.

    1996-01-01

    A key obstacle hampering fielding of AI planning applications is the considerable expense of developing, verifying, updating, and maintaining the planning knowledge base (KB). Planning systems must be able to compare favorably in terms of software lifecycle costs to other means of automation such as scripts or rule-based expert systems.

  20. MO-D-BRC-03: Knowledge-Based Planning

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Q. [Duke University Medical Center (United States)

    2016-06-15

    Treatment planning is a central part of radiation therapy, including delineation in tumor volumes and critical organs, setting treatment goals of prescription doses to the tumor targets and tolerance doses to the critical organs, and finally generation of treatment plans to meet the treatment goals. National groups like RTOG have led the effort to standardize treatment goals of the prescription doses to the tumor targets and tolerance doses to the critical organs based on accumulated knowledge from decades of abundant clinical trial experience. The challenge for each clinical department is how to achieve or surpass these set goals within the time constraints of clinical practice. Using fifteen testing cases from different treatment sites such as head and neck, prostate with and without pelvic lymph nodes, SBRT spine, we will present clinically utility of advanced planning tools, including knowledge based, automatic based, and multiple criteria based tools that are clinically implemented. The objectives of this session are: Understand differences among these three advanced planning tools Provide clinical assessments on the utility of the advanced planning tools Discuss clinical challenges of treatment planning with large variations in tumor volumes and their relationships with adjacent critical organs. Ping Xia received research grant from Philips. Jackie Wu received research grant from Varian; P. Xia, Research support by Philips and Varian; Q. Wu, NIH, Varian Medical.

  1. MO-D-BRC-03: Knowledge-Based Planning

    International Nuclear Information System (INIS)

    Wu, Q.

    2016-01-01

    Treatment planning is a central part of radiation therapy, including delineation in tumor volumes and critical organs, setting treatment goals of prescription doses to the tumor targets and tolerance doses to the critical organs, and finally generation of treatment plans to meet the treatment goals. National groups like RTOG have led the effort to standardize treatment goals of the prescription doses to the tumor targets and tolerance doses to the critical organs based on accumulated knowledge from decades of abundant clinical trial experience. The challenge for each clinical department is how to achieve or surpass these set goals within the time constraints of clinical practice. Using fifteen testing cases from different treatment sites such as head and neck, prostate with and without pelvic lymph nodes, SBRT spine, we will present clinically utility of advanced planning tools, including knowledge based, automatic based, and multiple criteria based tools that are clinically implemented. The objectives of this session are: Understand differences among these three advanced planning tools Provide clinical assessments on the utility of the advanced planning tools Discuss clinical challenges of treatment planning with large variations in tumor volumes and their relationships with adjacent critical organs. Ping Xia received research grant from Philips. Jackie Wu received research grant from Varian; P. Xia, Research support by Philips and Varian; Q. Wu, NIH, Varian Medical

  2. The Design of Large Technological Systems

    DEFF Research Database (Denmark)

    Pineda, Andres Felipe Valderrama

    implies a reconfiguration of the designing team, the supporting actors and the diverse user groups. By tracing material scripts, the author accounts for the unfolding of visions, politics and materialities that constitute the system. The analysis contributes to understanding the complex sociotechnical...

  3. Competencies for Central American SMEs in the Knowledge-Based ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Knowledge-based economy not only affects well developed countries but ... to the information and communication technologies (ICT) related competencies, as technologies plays a key and growing role in managing knowledge and exchange.

  4. Knowledge-Base Application to Ground Moving Target Detection

    National Research Council Canada - National Science Library

    Adve, R

    2001-01-01

    This report summarizes a multi-year in-house effort to apply knowledge-base control techniques and advanced Space-Time Adaptive Processing algorithms to improve detection performance and false alarm...

  5. Automatic management software for large-scale cluster system

    International Nuclear Information System (INIS)

    Weng Yunjian; Chinese Academy of Sciences, Beijing; Sun Gongxing

    2007-01-01

    At present, the large-scale cluster system faces to the difficult management. For example the manager has large work load. It needs to cost much time on the management and the maintenance of large-scale cluster system. The nodes in large-scale cluster system are very easy to be chaotic. Thousands of nodes are put in big rooms so that some managers are very easy to make the confusion with machines. How do effectively carry on accurate management under the large-scale cluster system? The article introduces ELFms in the large-scale cluster system. Furthermore, it is proposed to realize the large-scale cluster system automatic management. (authors)

  6. An Algebraic Approach to Knowledge Bases Informational Equivalence

    OpenAIRE

    Plotkin, B.; Plotkin, T.

    2003-01-01

    In this paper we study the notion of knowledge from the positions of universal algebra and algebraic logic. We consider first order knowledge which is based on first order logic. We define categories of knowledge and knowledge bases. These notions are defined for the fixed subject of knowledge. The key notion of informational equivalence of two knowledge bases is introduced. We use the idea of equivalence of categories in this definition. We prove that for finite models there is a clear way t...

  7. XML-Based SHINE Knowledge Base Interchange Language

    Science.gov (United States)

    James, Mark; Mackey, Ryan; Tikidjian, Raffi

    2008-01-01

    The SHINE Knowledge Base Interchange Language software has been designed to more efficiently send new knowledge bases to spacecraft that have been embedded with the Spacecraft Health Inference Engine (SHINE) tool. The intention of the behavioral model is to capture most of the information generally associated with a spacecraft functional model, while specifically addressing the needs of execution within SHINE and Livingstone. As such, it has some constructs that are based on one or the other.

  8. Knowledge-based development in Singapore and Malaysia

    OpenAIRE

    Menkhoff, Thomas; Gerke, Solvay; Evers, Hans-Dieter; Chay, Yue Wah

    2009-01-01

    This paper addresses the question how knowledge is used to benefit the economic development of Singapore and Malaysia. Both countries have followed strict science policies to establish knowledge governance regimes for a knowledge-based economy. On the basis of empirical studies in both countries we show, how ethnic and religious diversity impact on the ability to develop an epistemic culture of knowledge sharing and ultimately an innovative knowledge-based economy.

  9. KNOWLEDGE SOCIETY, GENERAL FRAMEWORK FOR KNOWLEDGE BASED ECONOMY

    Directory of Open Access Journals (Sweden)

    Dragos CRISTEA

    2011-03-01

    Full Text Available This paper tries to present the existent relation between knowledge society and knowledge based economy. We will identify the main pillars of knowledge society and present their importance for the development of knowledge societies. Further, we will present two perspectives over knowledge societies, respectively science and learning perspectives, that directly affects knowledge based economies. At the end, we will conclude by identifying some important questions that must be answered regarding this new social paradigm.

  10. Research on the construction of knowledge base for institutes

    International Nuclear Information System (INIS)

    Yang Ru

    2014-01-01

    Knowledge base (KB in short) is very important for institutes. It can train employees to improve their ability of work. It can supply more information to directors for making right decisions, and can help constructing learning organization to promote innovation. Institutes possess several information systems, but there are some problems such as inadequate use of documents, and connotative knowledge isn't described and communicated. KB of institute is based on programs. It stress integrity, secrecy of programs and authorized access. Libraries have abilities to construct KB, since it's the center of information for the institute. KB of institute includes: KB of training, communion of technique issues, KB of department, personal KB, KB of specialists. Because of low cost many institutes adopt softwares of free codes such as: DSpace, EPrints, Fedodra, CDSware, Greenstone. KB systems are choosed by institutes, depending on types of knowledge, ability of technique, fund and so on. KB is constructed by collecting, sorting, describing key knowledge, connecting, accessing, updating and innovating. Program KB of different places and majors will unite in the future. (author)

  11. Nuclear reactions video (knowledge base on low energy nuclear physics)

    International Nuclear Information System (INIS)

    Zagrebaev, V.; Kozhin, A.

    1999-01-01

    The NRV (nuclear reactions video) is an open and permanently extended global system of management and graphical representation of nuclear data and video-graphic computer simulation of low energy nuclear dynamics. It consists of a complete and renewed nuclear database and well known theoretical models of low energy nuclear reactions altogether forming the 'low energy nuclear knowledge base'. The NRV solves two main problems: 1) fast and visualized obtaining and processing experimental data on nuclear structure and nuclear reactions; 2) possibility for any inexperienced user to analyze experimental data within reliable commonly used models of nuclear dynamics. The system is based on the realization of the following principal things: the net and code compatibility with the main existing nuclear databases; maximal simplicity in handling: extended menu, friendly graphical interface, hypertext description of the models, and so on; maximal visualization of input data, dynamics of studied processes and final results by means of real three-dimensional images, plots, tables and formulas and a three-dimensional animation. All the codes are composed as the real Windows applications and work under Windows 95/NT

  12. Iterative solution of large linear systems

    CERN Document Server

    Young, David Matheson

    1971-01-01

    This self-contained treatment offers a systematic development of the theory of iterative methods. Its focal point resides in an analysis of the convergence properties of the successive overrelaxation (SOR) method, as applied to a linear system with a consistently ordered matrix. The text explores the convergence properties of the SOR method and related techniques in terms of the spectral radii of the associated matrices as well as in terms of certain matrix norms. Contents include a review of matrix theory and general properties of iterative methods; SOR method and stationary modified SOR meth

  13. Content and structure of knowledge base used for virtual control of android arm motion in specified environment

    Science.gov (United States)

    Pritykin, F. N.; Nebritov, V. I.

    2018-01-01

    The paper presents the configuration of knowledge base necessary for intelligent control of android arm mechanism motion with different positions of certain forbidden regions taken into account. The present structure of the knowledge base characterizes the past experience of arm motion synthesis in the vector of velocities with due regard for the known obstacles. This structure also specifies its intrinsic properties. Knowledge base generation is based on the study of the arm mechanism instantaneous states implementations. Computational experiments connected with the virtual control of android arm motion with known forbidden regions using the developed knowledge base are introduced. Using the developed knowledge base to control virtually the arm motion reduces the time of test assignments calculation. The results of the research can be used in developing control systems of autonomous android robots in the known in advance environment.

  14. Large computer systems and new architectures

    International Nuclear Information System (INIS)

    Bloch, T.

    1978-01-01

    The super-computers of today are becoming quite specialized and one can no longer expect to get all the state-of-the-art software and hardware facilities in one package. In order to achieve faster and faster computing it is necessary to experiment with new architectures, and the cost of developing each experimental architecture into a general-purpose computer system is too high when one considers the relatively small market for these computers. The result is that such computers are becoming 'back-ends' either to special systems (BSP, DAP) or to anything (CRAY-1). Architecturally the CRAY-1 is the most attractive today since it guarantees a speed gain of a factor of two over a CDC 7600 thus allowing us to regard any speed up resulting from vectorization as a bonus. It looks, however, as if it will be very difficult to make substantially faster computers using only pipe-lining techniques and that it will be necessary to explore multiple processors working on the same problem. The experience which will be gained with the BSP and the DAP over the next few years will certainly be most valuable in this respect. (Auth.)

  15. Performance regression manager for large scale systems

    Science.gov (United States)

    Faraj, Daniel A.

    2017-08-01

    System and computer program product to perform an operation comprising generating, based on a first output generated by a first execution instance of a command, a first output file specifying a value of at least one performance metric, wherein the first output file is formatted according to a predefined format, comparing the value of the at least one performance metric in the first output file to a value of the performance metric in a second output file, the second output file having been generated based on a second output generated by a second execution instance of the command, and outputting for display an indication of a result of the comparison of the value of the at least one performance metric of the first output file to the value of the at least one performance metric of the second output file.

  16. Knowledge Base Applications to Adaptive Space-Time Processing, Volume 5: Knowledge-Based Tracker Rule Book

    National Research Council Canada - National Science Library

    Morgan, Charles

    2001-01-01

    ... processing algorithm can be applied. The proactive knowledge-based tracker uses information from other sources such as digital terrain maps, radar clutter and interference maps, and target priority assessments to determine the nature...

  17. Magmatic systems of large continental igneous provinces

    Directory of Open Access Journals (Sweden)

    E. Sharkov

    2017-07-01

    Full Text Available Large igneous provinces (LIPs formed by mantle superplume events have irreversibly changed their composition in the geological evolution of the Earth from high-Mg melts (during Archean and early Paleoproterozoic to Phanerozoic-type geochemically enriched Fe-Ti basalts and picrites at 2.3 Ga. We propose that this upheaval could be related to the change in the source and nature of the mantle superplumes of different generations. The first generation plumes were derived from the depleted mantle, whereas the second generation (thermochemical originated from the core-mantle boundary (CMB. This study mainly focuses on the second (Phanerozoic type of LIPs, as exemplified by the mid-Paleoproterozoic Jatulian–Ludicovian LIP in the Fennoscandian Shield, the Permian–Triassic Siberian LIP, and the late Cenozoic flood basalts of Syria. The latter LIP contains mantle xenoliths represented by green and black series. These xenoliths are fragments of cooled upper margins of the mantle plume heads, above zones of adiabatic melting, and provide information about composition of the plume material and processes in the plume head. Based on the previous studies on the composition of the mantle xenoliths in within-plate basalts around the world, it is inferred that the heads of the mantle (thermochemical plumes are made up of moderately depleted spinel peridotites (mainly lherzolites and geochemically-enriched intergranular fluid/melt. Further, it is presumed that the plume heads intrude the mafic lower crust and reach up to the bottom of the upper crust at depths ∼20 km. The generation of two major types of mantle-derived magmas (alkali and tholeiitic basalts was previously attributed to the processes related to different PT-parameters in the adiabatic melting zone whereas this study relates to the fluid regime in the plume heads. It is also suggested that a newly-formed melt can occur on different sides of a critical plane of silica undersaturation and can

  18. Balancing modern Power System with large scale of wind power

    DEFF Research Database (Denmark)

    Basit, Abdul; Altin, Müfit; Hansen, Anca Daniela

    2014-01-01

    Power system operators must ensure robust, secure and reliable power system operation even with a large scale integration of wind power. Electricity generated from the intermittent wind in large propor-tion may impact on the control of power system balance and thus deviations in the power system...... frequency in small or islanded power systems or tie line power flows in interconnected power systems. Therefore, the large scale integration of wind power into the power system strongly concerns the secure and stable grid operation. To ensure the stable power system operation, the evolving power system has...... to be analysed with improved analytical tools and techniques. This paper proposes techniques for the active power balance control in future power systems with the large scale wind power integration, where power balancing model provides the hour-ahead dispatch plan with reduced planning horizon and the real time...

  19. Biological standards for the Knowledge-Based BioEconomy: What is at stake.

    Science.gov (United States)

    de Lorenzo, Víctor; Schmidt, Markus

    2018-01-25

    The contribution of life sciences to the Knowledge-Based Bioeconomy (KBBE) asks for the transition of contemporary, gene-based biotechnology from being a trial-and-error endeavour to becoming an authentic branch of engineering. One requisite to this end is the need for standards to measure and represent accurately biological functions, along with languages for data description and exchange. However, the inherent complexity of biological systems and the lack of quantitative tradition in the field have largely curbed this enterprise. Fortunately, the onset of systems and synthetic biology has emphasized the need for standards not only to manage omics data, but also to increase reproducibility and provide the means of engineering living systems in earnest. Some domains of biotechnology can be easily standardized (e.g. physical composition of DNA sequences, tools for genome editing, languages to encode workflows), while others might be standardized with some dedicated research (e.g. biological metrology, operative systems for bio-programming cells) and finally others will require a considerable effort, e.g. defining the rules that allow functional composition of biological activities. Despite difficulties, these are worthy attempts, as the history of technology shows that those who set/adopt standards gain a competitive advantage over those who do not. Copyright © 2017 Elsevier B.V. All rights reserved.

  20. Qualitative processing of uncertainty, conflicts and redundancy in knowledge bases

    International Nuclear Information System (INIS)

    Zbytovsky, V.

    1994-01-01

    This paper describes two techniques, created and implemented in the course of development of the real-time on-line expert system Recon at the Nuclear Research Institute at Rez, Czech Republic. The first of them is the qualitative processing of uncertainty, which is based on the introduction of the third logic value to logic data objects, and the credibility flag to arithmetic data objects. The treatment of the third value and credibility flags during the inference, the explanation method based on the graphic representation and the uncertainty processing during the explanation are also mentioned. The second technique, is a semantic checking of knowledge bases, which enables us to recover parts of the bases, that are meaningless, either because of an error during their implementation into a base, or because they are redundant. The paper includes the explanation of basic terms of this method, such as so called conflicts, K-group and K-situation. The two types of the conflict (dead-end and bubble) are also discussed. The paper also offers the complete mathematical apparatus, which the checking method is based on. (author). 4 refs, tabs