WorldWideScience

Sample records for large single crystals

  1. The Growth of Large Single Crystals.

    Science.gov (United States)

    Baer, Carl D.

    1990-01-01

    Presented is an experiment which demonstrates principles of experimental design, solubility, and crystal growth and structure. Materials, procedures and results are discussed. Suggestions for adapting this activity to the high school laboratory are provided. (CW)

  2. Large-lattice-parameter perovskite single-crystal substrates

    Science.gov (United States)

    Uecker, Reinhard; Bertram, Rainer; Brützam, Mario; Galazka, Zbigniew; Gesing, Thorsten M.; Guguschev, Christo; Klimm, Detlef; Klupsch, Michael; Kwasniewski, Albert; Schlom, Darrell G.

    2017-01-01

    The pseudobinary system LaLuO3-LaScO3 was explored in hopes of discovering new perovskite-type substrates with pseudocubic lattice parameters above 4 Å. A complete solid solution of the type (LaLuO3)1-x(LaScO3)x forms between the end members LaLuO3 and LaScO3, enabling large single crystals of (LaLuO3)1-x(LaScO3)x to be grown from the melt. A single crystal with x≈0.34 was demonstrated. Considering the maximum thermal load of the iridium crucibles appropriate for Czochralski growth of this solid solution, the theoretically maximum achievable x-value is 0.67. Based on the phase diagram determined, it is anticipated that single crystals with pseudocubic lattice constants between 4.09 and 4.18 Å can be grown in this system by the Czochralski method.

  3. Large single-crystal diamond substrates for ionizing radiation detection

    Energy Technology Data Exchange (ETDEWEB)

    Girolami, Marco; Bellucci, Alessandro; Calvani, Paolo; Trucchi, Daniele M. [Istituto di Struttura della Materia (ISM), Consiglio Nazionale delle Ricerche (CNR), Sede Secondaria di Montelibretti, Monterotondo Stazione, Roma (Italy)

    2016-10-15

    The need for large active volume detectors for ionizing radiations and particles, with both large area and thickness, is becoming more and more compelling in a wide range of applications, spanning from X-ray dosimetry to neutron spectroscopy. Recently, 8.0 x 8.0 mm{sup 2} wide and 1.2 mm thick single-crystal diamond plates have been put on the market, representing a first step to the fabrication of large area monolithic diamond detectors with optimized charge transport properties, obtainable up to now only with smaller samples. The more-than-double thickness, if compared to standard plates (typically 500 μm thick), demonstrated to be effective in improving the detector response to highly penetrating ionizing radiations, such as γ-rays. Here we report on the first measurements performed on large active volume single-crystal diamond plates, both in the dark and under irradiation with optical wavelengths (190-1100 nm), X-rays, and radioactive γ-emitting sources ({sup 57}Co and {sup 22}Na). (copyright 2016 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  4. Crystallization phase diagram, the growth of large single crystals of bovine {beta}-Lactoglobulin A

    Energy Technology Data Exchange (ETDEWEB)

    Yagi, D; Ohnishi, Y; Tanaka, I; Niimura, N, E-mail: niimura@mx.ibaraki.ac.jp

    2010-11-01

    A crystallization phase diagram defining the meta-stable region of bovine {beta}-lactoglobulin A ({beta}-Lg) was firstly determined by a dialysis method. We have succeeded in growing a large single crystal of {beta}-Lg by selecting a crystal grown in this ''meta-stable region'' method described in the present paper. The quality of protein crystals was characterized quantitatively via rapid X-ray data collections, followed by the use of Wilson plots to analyze their resulting average B-factors.

  5. Crystallization phase diagram, the growth of large single crystals of bovine β-Lactoglobulin A

    Science.gov (United States)

    Yagi, D.; Ohnishi, Y.; Tanaka, I.; Niimura, N.

    2010-11-01

    A crystallization phase diagram defining the meta-stable region of bovine β-lactoglobulin A (β-Lg) was firstly determined by a dialysis method. We have succeeded in growing a large single crystal of β-Lg by selecting a crystal grown in this "meta-stable region" method described in the present paper. The quality of protein crystals was characterized quantitatively via rapid X-ray data collections, followed by the use of Wilson plots to analyze their resulting average B-factors.

  6. Photoinduced surface voltage mapping study for large perovskite single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Xiaojing; Liu, Yucheng; Gao, Fei; Yang, Zhou [Key Laboratory of Applied Surface and Colloid Chemistry, National Ministry of Education, Shaanxi Engineering Laboratory for Advanced Energy Technology, School of Materials Science and Engineering, Shaanxi Normal University, Xi' an 710062 (China); Liu, Shengzhong, E-mail: liusz@snnu.edu.cn [Key Laboratory of Applied Surface and Colloid Chemistry, National Ministry of Education, Shaanxi Engineering Laboratory for Advanced Energy Technology, School of Materials Science and Engineering, Shaanxi Normal University, Xi' an 710062 (China); Dalian Institute of Chemical Physics, iChEM, Dalian National Laboratory for Clean Energy, Chinese Academy of Sciences, Dalian 116023 (China)

    2016-05-02

    Using a series of illumination sources, including white light (tungsten-halogen lamp), 445-nm, 532-nm, 635-nm, and 730-nm lasers, the surface photovoltage (SPV) images were mapped for centimeter-sized CH{sub 3}NH{sub 3}PbX{sub 3} (X = Cl, Br, I) perovskite single crystals using Kelvin probe force microscopy. The significant SPV signals were observed to be wavelength-dependent. We attribute the appreciable SPV to the built-in electric field in the space charge region. This study shines light into the understanding of photoinduced charge generation and separation processes at nanoscale to help advance the development of perovskite solar cells, optoelectronics, laser, photodetector, and light-emitting diode (LED).

  7. Photoinduced surface voltage mapping study for large perovskite single crystals

    Science.gov (United States)

    Liu, Xiaojing; Liu, Yucheng; Gao, Fei; Yang, Zhou; Liu, Shengzhong Frank

    2016-05-01

    Using a series of illumination sources, including white light (tungsten-halogen lamp), 445-nm, 532-nm, 635-nm, and 730-nm lasers, the surface photovoltage (SPV) images were mapped for centimeter-sized CH3NH3PbX3 (X = Cl, Br, I) perovskite single crystals using Kelvin probe force microscopy. The significant SPV signals were observed to be wavelength-dependent. We attribute the appreciable SPV to the built-in electric field in the space charge region. This study shines light into the understanding of photoinduced charge generation and separation processes at nanoscale to help advance the development of perovskite solar cells, optoelectronics, laser, photodetector, and light-emitting diode (LED).

  8. Method for the growth of large low-defect single crystals

    Science.gov (United States)

    Powell, J. Anthony (Inventor); Neudeck, Philip G. (Inventor); Trunek, Andrew J. (Inventor); Spry, David J. (Inventor)

    2008-01-01

    A method and the benefits resulting from the product thereof are disclosed for the growth of large, low-defect single-crystals of tetrahedrally-bonded crystal materials. The process utilizes a uniquely designed crystal shape whereby the direction of rapid growth is parallel to a preferred crystal direction. By establishing several regions of growth, a large single crystal that is largely defect-free can be grown at high growth rates. This process is particularly suitable for producing products for wide-bandgap semiconductors, such as SiC, GaN, AlN, and diamond. Large low-defect single crystals of these semiconductors enable greatly enhanced performance and reliability for applications involving high power, high voltage, and/or high temperature operating conditions.

  9. Single Crystal Piezoelectric Deformable Mirrors with High Actuator Density and Large Stroke Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Single crystal piezoelectric deformable mirrors with high actuator density, fine pitch, large stroke and no floating wires will be developed for future NASA science...

  10. Single Crystal Piezomotor for Large Stroke, High Precision and Cryogenic Actuations Project

    Data.gov (United States)

    National Aeronautics and Space Administration — TRS Technologies proposes a novel single crystal piezomotor for large stroke, high precision, and cryogenic actuations with capability of position set-hold with...

  11. Large Area Single Crystal (0001) Oriented MoS2 Thin Films

    OpenAIRE

    Laskar, Masihhur R.; Ma, Lu; K, ShanthaKumar; Park, Pil Sung; Krishnamoorthy, Sriram; Nath, Digbijoy N.; Lu, Wu; Wu, Yiying; Rajan, Siddharth

    2013-01-01

    Layered metal dichalcogenide materials are a family of semiconductors with a wide range of energy band gaps and properties, and potential to open up new areas of physics and technology applications. However, obtaining high crystal quality thin films over a large area remains a challenge. Here we show that chemical vapor deposition (CVD) can be used to achieve large area electronic grade single crystal Molybdenum Disulfide (MoS2) thin films with the highest mobility reported in CVD grown films...

  12. Design of large-core single-mode Yb3+-doped photonic crystal fiber

    Institute of Scientific and Technical Information of China (English)

    ZHAO Xing-tao; ZHENG Yi; LIU Xiao-xu; ZHOU Gui-yao; LIU Zhao-lun; HOU Lan-tian

    2012-01-01

    The effective index of the cladding fundamental space-filing mode in photonic crystal fiber (PCF) is simulated by the effective index method.The variation of the effective index with the structure parameters of the fiber is achieved.For thefirst thne,the relations of the V parameter ofYb3+-doped PCF with the refractive index of core and the structure parameters of the fiber are provided.The single-mode characteristics of large-core yb3+-doped photonic crystal fibers with 7 and 19 missing air holes in the core are analyzed.The large-core single-mode Yb3+-doped photonic crystal fibers with core diameters of 50 μm,100 μm and 150 μm are designed.The results provide theory instruction for the design and fabrication of fiber.

  13. Large Stroke High Fidelity PZN-PT Single Crystal "Stake" Actuator.

    Science.gov (United States)

    Huang, Yu; Xia, Yue Xue; Lin, Dian Hua; Yao, Kui; Lim, Leong Chew

    2017-08-03

    A new piezoelectric actuator design, called "Stake" actuator, is proposed and demonstrated in this work. As an example, the stake actuator is made of four d32-mode PZN-5.5%PT single crystals, each of 25mmL × 8mmW × 0.4mmT in dimensions, bonded with the aid of polycarbonate (PC) edge guide-cum-stiffeners into a square-pipe configuration for improved bending and twisting strengths and capped with top and bottom pedestals made of 1.5 mm thick anodized aluminium. The resultant stake actuator measured 9 mm × 9 mm × 28 mm. The hollow structure is a key design feature, which optimizes single crystal usage efficiency and lowers the overall cost of the actuator. The displacement-voltage responses, blocking forces, resonance characteristics of the fabricated stake actuator, as well as the load and temperature effects, are measured and discussed. Since d32 is negative for [011]-poled single crystal, the "Stake" actuator contracts in the axial direction when a positive polarity field is applied to the crystals. Biased drive is thus recommended when extensional displacement is desired. The single crystal stake actuator has negligible ( 0.13% when driven up to +300V (i.e., 0.75 kV/mm), which is close to the rhombohedral-to-orthorhombic transformation field (E RO) of 0.85 kV/mm of the single crystal used. The stake actuator displays a stroke of -36.5 μm (at +300V) despite its small overall dimensions, and has a blocking force of 114 N. The single crystal d 32 stake actuator fabricated displays more than 30% larger axial strain than the state-of-the-art PZT stack actuators of comparable length as well as moderate blocking forces. Said actuators are thus ideal for applications when large displacements with simple open loop control are preferred.

  14. Synthesis and characterization of p-type boron-doped IIb diamond large single crystals

    Institute of Scientific and Technical Information of China (English)

    Li Shang-Sheng; Ma Hong-An; Li Xiao-Lei; Su Tai-Chao; Huang Guo-Feng; Li Yong; Jia Xiao-Peng

    2011-01-01

    High-quality p-type boron-doped II0b diamond large single crystals are successfully synthesized by the temperature gradient method in a china-type cubic anvil high-pressure apparatus at about 5.5 GPa and 1600 K. The morphologies and surface textures of the synthetic diamond crystals with different boron additive quantities are characterized by using an optical microscope and a scanning electron microscope respectively. The impurities of nitrogen and boron in diamonds are detected by micro Fourier transform infrared technique. The electrical properties including resistivities, Hall coefficients, Hall mobilities and carrier densities of the synthesized samples are measured by a four-point probe and the Hall effect method. The results show that large p-type boron-doped diamond single crystals with few nitrogen impurities have been synthesized. With the increase of quantity of additive boron, some high-index crystal faces such as {113} gradually disappear, and some stripes and triangle pits occur on the crystal surface. This work is helpful for the further research and application of boron-doped semiconductor diamond.

  15. Dislocation Analysis for Large-sized Sapphire Single Crystal Grown by SAPMAC Method

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    In this paper, large-sized sapphire (Φ230×210 mm, 27.5 kg) was grown by SAPMAC method (sapphire growth technique with micro-pulling and shoulder-expanding at the cooled center). Dislocation peculiarity in large sapphire boule (0001) basal plane was investigated by chemical etching, scanning electron microscopy and X-ray topography method. The triangular dislocation etch pit measured is 7.6×101~8.0×102 cm-2, in which relative high-density dislocations were generated at both initial and final stages of crystal growth. The analysis of single-crystal X-ray topography shows that there are no apparent sub-grain boundaries; the dislocation lines are isolated and straight. Finally, the origins of low-density dislocation in sapphire crystal are discussed by numerical analysis method.

  16. Large pyramid shaped single crystals of BiFeO{sub 3} by solvothermal synthesis method

    Energy Technology Data Exchange (ETDEWEB)

    Sornadurai, D.; Ravindran, T. R.; Paul, V. Thomas; Sastry, V. Sankara [Condensed Matter Physics Division, Materials Science Group, Physical Metallurgy Division, Metallurgy and Materials Group, Indira Gandhi Centre for Atomic Research, Kalpakkam, Tamil Nadu (India); Condensed Matter Physics Division, Materials Science Group (India)

    2012-06-05

    Synthesis parameters are optimized in order to grow single crystals of multiferroic BiFeO{sub 3}. 2 to 3 mm size pyramid (tetrahedron) shaped single crystals were successfully obtained by solvothermal method. Scanning electron microscopy with EDAX confirmed the phase formation. Raman scattering spectra of bulk BiFeO3 single crystals have been measured which match well with reported spectra.

  17. Large rotating magnetocaloric effect in ErAlO3 single crystal

    Directory of Open Access Journals (Sweden)

    X. Q. Zhang

    2017-05-01

    Full Text Available Magnetic and magnetocaloric properties of ErAlO3 single crystal were investigated. Magnetization of ErAlO3 shows obvious anisotropy when magnetic field is applied along the a, b and c axes, which leads to large anisotropic magnetic entropy change. In particular, large rotating field entropy change from the b to c axis within the bc plane is obtained and reaches 9.7 J/kg K at 14 K in a field of 5 T. This suggests the possibility of using ErAlO3 single crystal for magnetic refrigerators by rotating its magnetization vector rather than moving it in and out of the magnet.

  18. High-mobility field-effect transistors from large-area solution-grown aligned C60 single crystals.

    Science.gov (United States)

    Li, Hanying; Tee, Benjamin C-K; Cha, Judy J; Cui, Yi; Chung, Jong Won; Lee, Sang Yoon; Bao, Zhenan

    2012-02-08

    Field-effect transistors based on single crystals of organic semiconductors have the highest reported charge carrier mobility among organic materials, demonstrating great potential of organic semiconductors for electronic applications. However, single-crystal devices are difficult to fabricate. One of the biggest challenges is to prepare dense arrays of single crystals over large-area substrates with controlled alignment. Here, we describe a solution processing method to grow large arrays of aligned C(60) single crystals. Our well-aligned C(60) single-crystal needles and ribbons show electron mobility as high as 11 cm(2)V(-1)s(-1) (average mobility: 5.2 ± 2.1 cm(2)V(-1)s(-1) from needles; 3.0 ± 0.87 cm(2)V(-1)s(-1) from ribbons). This observed mobility is ~8-fold higher than the maximum reported mobility for solution-grown n-channel organic materials (1.5 cm(2)V(-1)s(-1)) and is ~2-fold higher than the highest mobility of any n-channel organic material (~6 cm(2)V(-1)s(-1)). Furthermore, our deposition method is scalable to a 100 mm wafer substrate, with around 50% of the wafer surface covered by aligned crystals. Hence, our method facilitates the fabrication of large amounts of high-quality semiconductor crystals for fundamental studies, and with substantial improvement on the surface coverage of crystals, this method might be suitable for large-area applications based on single crystals of organic semiconductors.

  19. Printed Large-Area Single-Mode Photonic Crystal Bandedge Surface-Emitting Lasers on Silicon.

    Science.gov (United States)

    Zhao, Deyin; Liu, Shihchia; Yang, Hongjun; Ma, Zhenqiang; Reuterskiöld-Hedlund, Carl; Hammar, Mattias; Zhou, Weidong

    2016-01-04

    We report here an optically pumped hybrid III-V/Si photoic crystal surface emitting laser (PCSEL), consisting of a heterogeneously integrated III-V InGaAsP quantum well heterostructure gain medium, printed on a patterned defect-free Si photonic crystal (PC) bandedge cavity. Single mode lasing was achieved for a large area laser, with a side-mode suppression ratio of 28 dB, for lasing operation temperature ~ 200 K. Two types of lasers were demonstrated operating at different temperatures. Detailed modal analysis reveals the lasing mode matches with the estimated lasing gain threshold conditions. Our demonstration promises a hybrid laser sources on Si towards three-dimensional (3D) integrated Si photonics for on-chip wavelength-division multiplex (3D WDM) systems for a wide range of volume photonic/electronic applications in computing, communication, sensing, imaging, etc.

  20. Recent progress in the growth and characterization of large Ge single crystals for IR optics and microelectronics

    Science.gov (United States)

    Azoulay, Moshe; Gafni, Gabriella; Roth, Michael

    1991-11-01

    During recent years there has been an increasing demand for large homogeneous Ge single crystals to be used as optical components in high resolution thermal imaging systems. Thus, the authors' research focused on understanding the roles of dopant and stress distribution in large Ge crystals and their influence on the optical performance in the IR region, 8-12 micrometers . More recently, a new application for heavily dope, n-type Ge crystals with low resistivity (~0.1 Ω.cm) and high crystalline perfection (EPD ~5 X 103cm-2) has been reported. This paper presents the growth and characterization of large homogeneous Ge single crystals with diameters up to 240 mm for IR optics. Preliminary results on the growth of 75 mm diameter Ge single crystals for substrates preparation are given. These substrates can be used in GaAs solar cells for space applications.

  1. Large single crystal growth of MnWO4-type materials from high-temperature solutions

    Science.gov (United States)

    Gattermann, U.; Röska, B.; Paulmann, C.; Park, S.-H.

    2016-11-01

    A simple high-temperature growth apparatus was constructed to obtain large crystals of chemically gradient (In, Na)-doped MnWO4solid-solutions. This paper presents the crystal growth and characterisation of both MnWO4and epitaxially grown (In, Na): MnWO4crystals on MnWO4. These large monolithic crystals were made in two steps: A MnWO4 crystal was grown in the crystallographic main direction [001] applying the Czochralski method, followed by the top seeded growth of (In, Na): MnWO4 solid-solutions with an oriented seed crystal of MnWO4. Such a monolithic crystal will serve to fundamental investigation of coupling properties at boundaries between various multiferroic MnWO4-typesolid-solutions.

  2. Growth of large naphthalene and anthracene single-crystal sheets at the liquid–air interface

    Energy Technology Data Exchange (ETDEWEB)

    Postnikov, V. A., E-mail: postva@yandex.ru [Donbas National Academy of Civil Engineering and Architecture (Ukraine); Chertopalov, S. V. [Donetsk National University (Ukraine)

    2015-07-15

    The growth of organic single crystals of naphthalene (C{sub 10}H{sub 8}) and anthracene (C{sub 14}H{sub 10}) at the liquid‒air interface from a mixture of solvents has been investigated. The growth technique used in the study makes it possible to obtain single-crystal sheets up to 10 mm in size for 24 h. The surface morphology and structure of the crystals have been analyzed by optical microscopy and X-ray diffraction. C{sub 10}H{sub 8} and C{sub 14}H{sub 10} single crystals grow coplanarly along the (001) plane. A thermodynamic model of the flat-crystal nucleus formation at the liquid‒air interface, based on the analysis of the change in the free Gibbs energy, is considered.

  3. Growth of large size lithium niobate single crystals of high quality by tilting-mirror-type floating zone method

    Energy Technology Data Exchange (ETDEWEB)

    Sarker, Abdur Razzaque, E-mail: razzaque_ru2000@yahoo.com [Department of Physics, University of Rajshahi (Bangladesh)

    2016-05-15

    Large size high quality LiNbO{sub 3} single crystals were grown successfully by tilting-mirror-type floating zone (TMFZ) technique. The grown crystals were characterized by X-ray diffraction, etch pits density measurement, Impedance analysis, Vibrating sample magnetometry (VSM) and UV-Visible spectrometry. The effect of mirror tilting during growth on the structural, electrical, optical properties and defect density of the LiNbO{sub 3} crystals were investigated. It was found that the defect density in the crystals reduced for tilting the mirror in the TMFZ method. The chemical analysis revealed that the grown crystals were of high quality with uniform composition. The single crystals grown by TMFZ method contains no low-angle grain boundaries, indicating that they can be used for high efficiency optoelectronic devices. (author)

  4. Growth and characterization of large, high quality MoSe2 single crystals

    Science.gov (United States)

    Bougouma, Moussa; Batan, Abdelkrim; Guel, Boubié; Segato, Tiriana; Legma, Jean B.; Reniers, Francois; Delplancke-Ogletree, Marie-Paule; Buess-Herman, Claudine; Doneux, Thomas

    2013-01-01

    MoSe2 single crystals were grown by chemical vapor transport using TeCl4 as transport agents in the temperature gradient 1020-980 °C. They were characterized by scanning electron microscopy (SEM), optical microscopy, image analysis coupled with SEM, microanalysis by SEM-EDX, X-ray fluorescence, inductively coupled plasma (ICP), X-ray photoelectron spectroscopy (XPS) and electrical conductivity. The characterizations showed that single crystals are perfectly homogeneous, stoichiometric and have very few defects and clean surfaces with areas in the range of 35-100 mm2. Single crystals grown by TeCl4 showed a high electrical conductivity. Their properties were highly dependent on the quality of the polycrystalline powders used for the growth.

  5. SINGLE CRYSTAL NEUTRON DIFFRACTION.

    Energy Technology Data Exchange (ETDEWEB)

    KOETZLE,T.F.

    2001-03-13

    Single-crystal neutron diffraction measures the elastic Bragg reflection intensities from crystals of a material, the structure of which is the subject of investigation. A single crystal is placed in a beam of neutrons produced at a nuclear reactor or at a proton accelerator-based spallation source. Single-crystal diffraction measurements are commonly made at thermal neutron beam energies, which correspond to neutron wavelengths in the neighborhood of 1 Angstrom. For high-resolution studies requiring shorter wavelengths (ca. 0.3-0.8 Angstroms), a pulsed spallation source or a high-temperature moderator (a ''hot source'') at a reactor may be used. When complex structures with large unit-cell repeats are under investigation, as is the case in structural biology, a cryogenic-temperature moderator (a ''cold source'') may be employed to obtain longer neutron wavelengths (ca. 4-10 Angstroms). A single-crystal neutron diffraction analysis will determine the crystal structure of the material, typically including its unit cell and space group, the positions of the atomic nuclei and their mean-square displacements, and relevant site occupancies. Because the neutron possesses a magnetic moment, the magnetic structure of the material can be determined as well, from the magnetic contribution to the Bragg intensities. This latter aspect falls beyond the scope of the present unit; for information on magnetic scattering of neutrons see Unit 14.3. Instruments for single-crystal diffraction (single-crystal diffractometers or SCDs) are generally available at the major neutron scattering center facilities. Beam time on many of these instruments is available through a proposal mechanism. A listing of neutron SCD instruments and their corresponding facility contacts is included in an appendix accompanying this unit.

  6. Growth and characterization of large YBa2Cu3O(7-x) single crystals

    Science.gov (United States)

    Keester, Kenneth L.; Housley, Robert M.; Marshall, David B.

    1988-01-01

    Centimeter-sized crystal plates of YBa2Cu3O(7-x) have been obtained using a bulk composition and method described by Schneemeyer at al. (1987) modified for growth in a pure oxygen atmosphere. A porous MgO crucible and long soak time promote large crystals. Mg was not detectable in the crystals. Electron microbeam analysis using a 60 A monochromator crystal for the oxygen determination gave the composition Y(1.05)Ba(2.02)Cu(2.94)O(6.52 + or - 0.06). As-grown crystals from the melt surface exhibit a fairly sharp Tc with zero resistance at 80 K, and show complex twinning and crack patterns. Optical micrographs of a lightly polished surface normal to the c-axis of a 3-mm crystal delineate twinning and fine scale microcracking; this crystal surface now has a zero resistance at 68 K. Microhardness measurements and microfracture observations indicate intrinsic properties that may inhibit or impede large scale manufacture of electronic ceramics.

  7. Large linear magnetoresistance and shubnikov-de hass oscillations in single crystals of YPdBi heusler topological insulators

    KAUST Repository

    Wang, Wenhong

    2013-07-12

    We report the observation of a large linear magnetoresistance (MR) and Shubnikov-de Hass (SdH) quantum oscillations in single crystals of YPdBi Heusler topological insulators. Owning to the successfully obtained the high-quality YPdBi single crystals, large non-saturating linear MR of as high as 350% at 5K and over 120% at 300K under a moderate magnetic field of 7T is observed. In addition to the large, field-linear MR, the samples exhibit pronounced SdH quantum oscillations at low temperature. Analysis of the SdH data manifests that the high-mobility bulk electron carriers dominate the magnetotransport and are responsible for the observed large linear MR in YPdBi crystals. These findings imply that the Heusler-based topological insulators have superiorities for investigating the novel quantum transport properties and developing the potential applications.

  8. Maximum length of large diameter Czochralski silicon single crystals at fracture stress limit of seed

    Science.gov (United States)

    Kim, K. M.; Smetana, P.

    1990-03-01

    Growth of large diameter Czochralski (CZ) silicon crystals require complete elimination of dislocations by means of Dash technique, where the seed diameter is reduced to a small size typically 3 mm in conjunction with increase in the pull rate. The maximum length of the large CZ silicon is estimated at the fracture stress limit of the seed neck diameter ( d). The maximum lengths for 200 and 300 mm CZ crystals amount to 197 and 87 cm, respectively, with d = 0.3 cm; the estimated maximum weight is 144 kg.

  9. Highly tunable large core single-mode liquid crystal photonic bandgap fiber

    DEFF Research Database (Denmark)

    Alkeskjold, Thomas Tanggaard; Lægsgaard, Jesper; Bjarklev, Anders Overgaard;

    2006-01-01

    We demonstrate a highly tunable photonic bandgap fiber, which has a large-core diameter of 25 mu m and an effective mode area of 440 mu m(2). The tunability is achieved by infiltrating the air holes of a photonic crystal fiber with an optimized liquid-crystal mixture having a large temperature...... gradient of the refractive indices at room temperature. A bandgap tuning sensitivity of 27 nm/degrees C is achieved at room temperature. The insertion loss is estimated to be less than 0.5 dB and caused mainly by coupling loss between the index-guided mode and the bandgap-guided mode. (c) 2006 Optical...

  10. Direct writing of large-area plasmonic photonic crystals using single-shot interference ablation

    Energy Technology Data Exchange (ETDEWEB)

    Pang Zhaoguang; Zhang Xinping, E-mail: zhangxinping@bjut.edu.cn [Institute of Information Photonics Technology and College of Applied Sciences, Beijing University of Technology, Beijing 100124 (China)

    2011-04-08

    We report direct writing of metallic photonic crystals (MPCs) through a single-shot exposure of a thin film of colloidal gold nanoparticles to the interference pattern of a single UV laser pulse before a subsequent annealing process. This is defined as interference ablation, where the colloidal gold nanoparticles illuminated by the bright interference fringes are removed instantly within a timescale of about 6 ns, which is actually the pulse length of the UV laser, whereas the gold nanoparticles located within the dark interference fringes remain on the substrate and form grating structures. This kind of ablation has been proven to have a high spatial resolution and thus enables successful fabrication of waveguided MPC structures with the optical response in the visible spectral range. The subsequent annealing process transforms the grating structures consisting of ligand-covered gold nanoparticles into plasmonic MPCs. The annealing temperature is optimized to a range from 250 to 300 deg. C to produce MPCs of gold nanowires with a period of 300 nm and an effective area of 5 mm in diameter. If the sample of the spin-coated gold nanoparticles is rotated by 90{sup 0} after the first exposure, true two-dimensional plasmonic MPCs are produced through a second exposure to the interference pattern. Strong plasmonic resonance and its coupling with the photonic modes of the waveguided MPCs verifies the success of this new fabrication technique. This is the simplest and most efficient technique so far for the construction of large-area MPC devices, which enables true mass fabrication of plasmonic devices with high reproducibility and high success rate.

  11. Synthesis of Large-Sized Single-Crystal Hexagonal Boron Nitride Domains on Nickel Foils by Ion Beam Sputtering Deposition.

    Science.gov (United States)

    Wang, Haolin; Zhang, Xingwang; Liu, Heng; Yin, Zhigang; Meng, Junhua; Xia, Jing; Meng, Xiang-Min; Wu, Jinliang; You, Jingbi

    2015-12-22

    Large-sized single-crystal h-BN domains with a lateral size up to 100 μm are synthesized on Ni foils by ion-beam sputtering deposition. The nucleation density of h-BN is dramatically decreased by reducing the concentrations of both active sites and species on the Ni surface through a brief in situ pretreatment of the substrate and optimization of the growth parameters, enabling the growth of large-sized domains.

  12. Growth of single crystals of organic salts with large second-order optical nonlinearities by solution processes for devices

    Science.gov (United States)

    Leslie, Thomas M.

    1995-01-01

    Data obtained from the electric field induced second harmonic generation (EFISH) and Kurtz Powder Methods will be provided to MSFC for further refinement of their method. A theoretical model for predicting the second-order nonlinearities of organic salts is being worked on. Another task is the synthesis of a number of salts with various counterions. Several salts with promising SHG activities and new salts will be tested for the presence of two crystalline forms. The materials will be recrystallized from dry and wet solvents and compared for SHG efficiency. Salts that have a high SHG efficiency and no tendency to form hydrates will be documented. The synthesis of these materials are included in this report. A third task involves method to aid in the growth of large, high quality single crystals by solution processes. These crystals will be characterized for their applicability in the fabrication of devices that will be incorporated into optical computers in future programs. Single crystals of optimum quality may be obtained by crystal growth in low-gravity. The final task is the design of a temperature lowering single crystal growth apparatus for ground based work. At least one prototype will be built.

  13. Large-sized SmBCO single crystals with T sub c over 93 K grown in atmospheric ambient by crystal pulling

    CERN Document Server

    Yao Xin; Shiohara, Y

    2003-01-01

    Sm sub 1 sub + sub x Ba sub 2 sub - sub x Cu sub 3 O sub z (SmBCO) single crystals were grown under atmospheric ambient by the top-seeded solution growth method. Inductively coupled plasma results indicate that there is negligible Sm substitution for Ba sites in the grown SmBCO crystals, although they crystallized from different Ba-Cu-O solvents with a wide composition range (Ba/Cu ratio of 0.5-0.6). As a result, these crystals show high superconducting critical transition temperature values (T sub c) of over 93 K with a sharp transition width after oxygenation. A large-sized crystal with an a-b plane of 23 x 22 mm sup 2 and a c-axis of 19 mm was obtained at a high growth rate of nearly 0.13 mm h sup - sup 1. In short, with more controllable thermodynamic parameters, SmBCO single crystals can readily achieve both large size and high superconducting properties. (rapid communication)

  14. Annealing as grown large volume CZT single crystals increased spectral resolution

    Energy Technology Data Exchange (ETDEWEB)

    Dr. Longxia Li

    2008-03-19

    The spectroscopic performance of current large-volume Cadmium 10% Zinc Telluride, Cd{sub 0.9}Zn{sub 0.1}Te, (CZT) detectors is impaired by cumulative effect of tellurium precipitates (secondary phases) presented in CZT single-crystal grown by low-pressure Bridgman techniques(1). This statistical effect may limit the energy resolution of large-volume CZT detectors (typically 2-5% at 662 keV for 12-mm thick devices). The stochastic nature of the interaction prevents the use of any electronic or digital charge correction techniques without a significant reduction in the detector efficiency. This volume constraint hampers the utility of CZT since the detectors are inefficient at detecting photons >1MeV and/or in low fluency situations. During the project, seven runs CZT ingots have been grown, in these ingots the indium dopant concentrations have been changed in the range between 0.5ppm to 6ppm. The I-R mapping imaging method has been employed to study the Te-precipitates. The Teprecipitates in as-grown CZT wafers, and after annealing wafers have been systematically studied by using I-R mapping system (home installed, resolution of 1.5 {micro}m). We employed our I-R standard annealing CZT (Zn=4%) procedure or two-steps annealing into radiation CZT (Zn=10%), we achieved the 'non'-Te precipitates (size < 1 {micro}m) CZT n+-type with resistivity > 10{sup 9-10} {Omega}-cm. We believe that the Te-precipitates are the p-type defects, its reducing number causes the CZT became n+-type, therefore we varied or reduced the indium dapant concentration during the growth and changed the Te-precipitates size and density by using different Cd-temperature and different annealing procedures. We have made the comparisons among Te-precipitates size, density and Indium dopant concentrations, and we found that the CZT with smaller size of Te-precipitates is suitable for radiation uses but non-Te precipitates is impossible to be used in the radiation detectors, because the CZT

  15. Large piezoelectricity in electric-field modified single crystals of SrTiO3

    Science.gov (United States)

    Khanbabaee, B.; Mehner, E.; Richter, C.; Hanzig, J.; Zschornak, M.; Pietsch, U.; Stöcker, H.; Leisegang, T.; Meyer, D. C.; Gorfman, S.

    2016-11-01

    Defect engineering is an effective and powerful tool to control the existing material properties and produce completely new ones, which are symmetry-forbidden in a defect-free crystal. For example, the application of a static electric field to a single crystal of SrTiO3 forms a strained near-surface layer through the migration of oxygen vacancies out of the area beneath the positively charged electrode. While it was previously shown that this near-surface phase holds pyroelectric properties, which are symmetry-forbidden in centrosymmetric bulk SrTiO3, this paper reports that the same phase is strongly piezoelectric. We demonstrate the piezoelectricity of this phase through stroboscopic time-resolved X-ray diffraction under alternating electric field and show that the effective piezoelectric coefficient d33 ranges between 60 and 100 pC/N. The possible atomistic origins of the piezoelectric activity are discussed as a coupling between the electrostrictive effect and spontaneous polarization of this near-surface phase.

  16. Focusing of white synchrotron radiation using large-acceptance cylindrical refractive lenses made of singlecrystal diamond

    Energy Technology Data Exchange (ETDEWEB)

    Polikarpov, M., E-mail: polikarpov.maxim@mail.ru [Immanuel Kant Baltic Federal University, Nevskogo 14a, 23600 Kaliningrad (Russian Federation); Snigireva, I. [European Synchrotron Radiation Facility, 71 avenue des Martyrs, Grenoble 38043 (France); Snigirev, A. [Immanuel Kant Baltic Federal University, Nevskogo 14a, 23600 Kaliningrad (Russian Federation); European Synchrotron Radiation Facility, 71 avenue des Martyrs, Grenoble 38043 (France)

    2016-07-27

    Large-aperture cylindrical refractive lenses were manufactured by laser cutting of single-crystal diamond. Five linear single lenses with apertures of 1 mm and the depth of the structure of 1.2 mm were fabricated and tested at the ESRF ID06 beamline performing the focusing of white-beam synchrotron radiation. Uniform linear focus was stable during hours of exposure, representing such lenses as pre-focusing and collimating devices suitable for the front-end sections of today synchrotron radiation sources.

  17. Growth of phase-pure, crack-free single crystals and large-grained polycrystals of molybdenum disilicide

    Science.gov (United States)

    Rossetti, M.

    1970-01-01

    High purity molybdenum disilicide crystals are prepared by zone melting sintered compacts. This method yields single crystals or polycrystals free from macrocracks which allow better measurement and evaluation of mechanical properties.

  18. Effects of additive NaN3 on the HPHT synthesis of large single crystal diamond grown by TGM

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    In this paper,large single crystal diamond with perfect shape and high nitrogen concentration approximately 1671-1742 ppm was successfully synthesized by temperature gradient method (TGM) under high pressure and high temperature (HPHT).The HPHT synthesis conditions were about 5.5 GPa and 1500-1550 K.Sodium azide (NaN3) with different amount was added as the source of nitrogen into the synthesis system of high pure graphite and kovar alloy.The effects of additive NaN3 on crystal growth habit were investigated in detail.The crystal morphology,nitrogen concentration and existing form in synthetic diamond were characterized by means of scanning electron microscope (SEM) and infrared (IR) absorption spectra,respectively.The results show that with an increase of the content of NaN3 added in the synthesis system,the region of synthesis temperature for high-quality diamond becomes narrow,and crystal growth rate is restricted,whereas the nitrogen concentration in synthetic diamond increases.Nitrogen exists in diamond mainly in dispersed form (C-centers) and partially aggregated form (A-centers).The defects occur more frequently on crystal surface when excessive NaN3 is added in the synthesis system.

  19. Single Crystal and Large Grain Niobium Research at Michigan State University

    Energy Technology Data Exchange (ETDEWEB)

    Compton, Chris; Aizaz, Ahmad; Baars, Derek; Bieler, Tom; Bierwagen, John; Bricker, Steve; Grimm, Terry; Hartung, Walter; Jiang, Hairong; Johnson, Matt; Popielarski, John; Saxton, Laura; Antoine, Claire; Wagner, Bob; Kneisel, Peter

    2007-09-01

    As Superconducting Radio Frequency (SRF) technology is used in more accelerator designs, research has focused on increasing the efficiency of these accelerators by pushing gradients and investigating cast reduction options. Today, most SRF structures are fabricated from high purity niobium. Over years of research, a material specification has been derived that defines a uniaxial, fine gain structure for SRF cavity fabrication. Most recently a push has been made to investigate the merits of using single or large grain niobium as a possible alternative to fine grain niobium. Michigan State University (MSU), in collaboration with Fermi National Accelerator Laboratory (FNAL) and Thomas Jefferson National Accelerator Facility (JLAB), is researching large grain niobium via cavity fabrication processes end testing, as well as exploring materials science issues associated with recrystallization and heat transfer. Single-cell 1.3 GHz (Beta=0.081) cavities made from both fine end large grain niobium were compared both in terms of fabrication procedures and performance. Two 7-cell cavities are currently being fabricated.

  20. Large-scale single-crystal growth of (CH3)2NH2CuCl3 for neutron scattering experiments

    Science.gov (United States)

    Park, Garam; Oh, In-Hwan; Park, J. M. Sungil; Park, Seong-Hun; Hong, Chang Seop; Lee, Kwang-Sei

    2016-05-01

    Neutron scattering studies on low-dimensional quantum spin systems require large-size single-crystals. Single-crystals of (CH3)2NH2CuCl3 showing low-dimensional magnetic behaviors were grown by a slow solvent evaporation method in a two-solvent system at different temperature settings. The best results were obtained for the bilayer solution of methanol and isopropanol with a molar ratio of 2:1 at 35 °C. The quality of the obtained single-crystals was tested by powder and single-crystal X-ray diffraction and single-crystal neutron diffraction. In addition, to confirm structural phase transitions (SPTs), thermal analysis and single-crystal X-ray diffraction at 300 K and 175 K, respectively, were conducted, confirming the presence of a SPT at Tup=288 K on heating and Tdown=285 K on cooling.

  1. Oxygen-Activated Growth and Bandgap Tunability of Large Single-Crystal Bilayer Graphene

    Science.gov (United States)

    Hao, Yufeng; Hone, James; Ruoff, Rodney; Colombo, Luigi; the Hone Group Team

    Distinct from zero-bandgap single-layer graphene, Bernal-stacked bilayer graphene (BLG) is a semiconductor whose bandgap can be tuned by a transverse electric field, making it a unique material for a number of electronic and photonic devices. In this presentation, we will focus on the most recent progress in the identification of new growth mechanisms towards large-area single-layer BLG on Copper: multiple control experiments and first-principles calculations are used to support the proposed mechanisms. We emphasize that trace amount of impurities on metal surface are critical to initiate graphene growth and affect the growth kinetics. Furthermore, contrary to the traditional viewpoint that graphene growth is always surface-limited process, our new observations strongly suggest that metal bulk plays a role to feed carbon species for graphene growth. State-of-the-art structural characterizations and electrical transport measurements of the CVD graphene layers will be presented as well.

  2. Sn-based type-Ⅷ single-crystal clathrates with a large figure of merit

    Institute of Scientific and Technical Information of China (English)

    Deng Shu-Kang; Li De-Cong; Shen Lan-Xian; Hao Rui-Ting; T. Takabatake

    2012-01-01

    Single-crystal samples of type-Ⅷ BasGa16-xCuxSn30 (x =0,0.03,0.06,0.15) clathrates were prepared using the Sn-flux method.At room temperature the carrier density,n,is 3.5-5 × 1019 cm-3 for all the samples,the carrier mobility,μH,increases to more than twice that of BasGa16Sn30 for all the Cu doping samples,and consequently the electrical conductivity is enhanced distinctly from 1.90 × 104 S/m to 4.40 × 104 S/m,with the Cu composition increasing from x =0 to x =0.15.The Seebeck coefficient,α,decreases slightly with the increases in Cu composition.The k values are about 0.72 W/mK at 300 K and are almost invariant with temperature up to 500 K for the samples with x =0 and x =0.03.The lattice thermal conductivity,kL,decreases from 0.59 W/mK for x =0 to 0.50 W/mK for x =0.03 at 300 K.The figure of merit for x =0.03 reaches 1.35 at 540 K.

  3. Fabricating large two-dimensional single colloidal crystals by doping with active particles

    NARCIS (Netherlands)

    van der Meer, B; Filion, L; Dijkstra, M

    2016-01-01

    Using simulations we explore the behaviour of two-dimensional colloidal (poly)crystals doped with active particles. We show that these active dopants can provide an elegant new route to removing grain boundaries in polycrystals. Specifically, we show that active dopants both generate and are attract

  4. Growth of large aluminum nitride single crystals with thermal-gradient control

    Energy Technology Data Exchange (ETDEWEB)

    Bondokov, Robert T.; Rao, Shailaja P.; Schowalter, Leo J.

    2017-02-28

    In various embodiments, non-zero thermal gradients are formed within a growth chamber both substantially parallel and substantially perpendicular to the growth direction during formation of semiconductor crystals, where the ratio of the two thermal gradients (parallel to perpendicular) is less than 10, by, e.g., arrangement of thermal shields outside of the growth chamber.

  5. Facile electrochemical transfer of large-area single crystal epitaxial graphene from Ir(1 1 1)

    DEFF Research Database (Denmark)

    Koefoed, Line; Kongsfelt, Mikkel; Ulstrup, Søren

    2015-01-01

    introduced by the polishing procedure. Furthermore, areas with numerous wrinkles exist inbetween these lines, forming a network across the entire graphene crystal. Hence, the initial characteristics and imprints left on the sheet of graphene in terms of strain and wrinkles from the growth process remain...

  6. A simple hydrothermal method for the large-scale synthesis of single-crystal potassium tungsten bronze nanowires.

    Science.gov (United States)

    Gu, Zhanjun; Ma, Ying; Zhai, Tianyou; Gao, Bifen; Yang, Wensheng; Yao, Jiannian

    2006-10-10

    The large-scale synthesis of single-crystal K(x)WO(3) tungsten bronze nanowires has been successfully realized by a hydrothermal method under mild conditions. Uniform K(0.33)WO(3) nanowires with diameters of 5-25 nm and lengths of up to several micrometers are obtained. It is found that the morphology and crystallographic forms of the final products are strongly dependent on the sulfate and citric acid, which may act as structure-directing and soft-reducing agent, respectively. Some other influential factors on the growth of tungsten bronze nanowires, such as temperature and reaction time, are also discussed. It is worth noting that other alkali metal tungsten bronzes such as (NH(4))(x)WO(3), Rb(x)WO(3), and Cs(x)WO(3) could also be selectively synthesized by a similar route. Thus, this novel and efficient method could provide a potential mild route to selectively synthesize various tungsten bronze on-dimensional nanomaterials.

  7. Large-bandwidth planar photonic crystal waveguides

    DEFF Research Database (Denmark)

    Søndergaard, Thomas; Lavrinenko, Andrei

    2002-01-01

    A general design principle is presented for making finite-height photonic crystal waveguides that support leakage-free guidance of light over large frequency intervals. The large bandwidth waveguides are designed by introducing line defects in photonic crystal slabs, where the material in the lin......-free single-mode guidance is found for a large frequency interval covering 60% of the photonic band-gap.......A general design principle is presented for making finite-height photonic crystal waveguides that support leakage-free guidance of light over large frequency intervals. The large bandwidth waveguides are designed by introducing line defects in photonic crystal slabs, where the material in the line...... defect has appropriate dispersion properties relative to the photonic crystal slab material surrounding the line defect. A three-dimensional theoretical analysis is given for large-bandwidth waveguide designs based on a silicon-air photonic crystal slab suspended in air. In one example, the leakage...

  8. Growth of large size diamond single crystals by plasma assisted chemical vapour deposition: Recent achievements and remaining challenges

    Science.gov (United States)

    Tallaire, Alexandre; Achard, Jocelyn; Silva, François; Brinza, Ovidiu; Gicquel, Alix

    2013-02-01

    Diamond is a material with outstanding properties making it particularly suited for high added-value applications such as optical windows, power electronics, radiation detection, quantum information, bio-sensing and many others. Tremendous progresses in its synthesis by microwave plasma assisted chemical vapour deposition have allowed obtaining single crystal optical-grade material with thicknesses of up to a few millimetres. However the requirements in terms of size, purity and crystalline quality are getting more and more difficult to achieve with respect to the forecasted applications, thus pushing the synthesis method to its scientific and technological limits. In this paper, after a short description of the operating principles of the growth technique, the challenges of increasing crystal dimensions both laterally and vertically, decreasing and controlling point and extended defects as well as modulating crystal conductivity by an efficient doping will be detailed before offering some insights into ways to overcome them.

  9. Crystallization in large wireless networks

    CERN Document Server

    Morgenshtern, Veniamin I

    2007-01-01

    We analyze fading interference relay networks where M single-antenna source-destination terminal pairs communicate concurrently and in the same frequency band through a set of K single-antenna relays using half-duplex two-hop relaying. Assuming that the relays have channel state information (CSI), it is shown that in the large-M limit, provided K grows fast enough as a function of M, the network "decouples" in the sense that the individual source-destination terminal pair capacities are strictly positive. The corresponding required rate of growth of K as a function of M is found to be sufficient to also make the individual source-destination fading links converge to nonfading links. We say that the network "crystallizes" as it breaks up into a set of effectively isolated "wires in the air". A large-deviations analysis is performed to characterize the "crystallization" rate, i.e., the rate (as a function of M,K) at which the decoupled links converge to nonfading links. In the course of this analysis, we develo...

  10. Progress in growth of large {beta}-BaB{sub 2}O{sub 4} single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Perlov, D.; Livneh, S.; Czechowicz, P.; Goldgirsh, A.; Loiacono, D. [Advanced Crystal Group, Coherent Inc., 31 Farinella Drive, East Hanover, NJ 07936 (United States)

    2011-07-15

    Growth of large {beta}-barium borate (BBO) crystals of high optical quality has been challenging, even 25 years past its discovery. The best results in terms of size and quality have been demonstrated by means of TSSG (Top Seeded Solution Growth). Nevertheless, the maximum available size of nonlinear optical elements lags behind laser industry requirements. Due to increased size and availability, BBO finally started attracting attention for its favorable Q-switch properties. Yet, two or sometimes three crystals aligned together are still necessary to achieve the lengths often required for these applications. Material quality, in terms of optical perfection and optical absorption, is still questionable in many instances. Limited boule size still dictates relatively high material cost as well. Thorough analysis of the growth behavior of BBO helped us to develop production processes for large boules utilizing TSSG with pulling. High quality nonlinear optical crystal devices and Q-switches up to 40 mm in the z-direction have been enabled. We believe that the above size and quality are currently industry leading. (copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  11. Large single crystal diamond grown in FeNiMnCo-S-C system under high pressure and high temperature conditions

    Science.gov (United States)

    Zhang, He; Li, Shangsheng; Su, Taichao; Hu, Meihua; Li, Guanghui; Ma, Hongan; Jia, Xiaopeng

    2016-11-01

    Large diamonds have successfully been synthesized from FeNiMnCo-S-C system at temperatures of 1255-1393 °C and pressures of 5.3-5.5 GPa. Because of the presence of sulfur additive, the morphology and color of the large diamond crystals change obviously. The content and shape of inclusions change with increasing sulfur additive. It is found that the pressure and temperature conditions required for the synthesis decrease to some extent with the increase of S additive, which results in left down of the V-shape region. The Raman spectra show that the introduction of additive sulfur reduces the quality of the large diamond crystals. The x-ray photoelectron spectroscopy (XPS) spectra show the presence of S in the diamonds. Furthermore, the electrical properties of the large diamond crystals are tested by a four-point probe and the Hall effect method. When sulfur in the cell of diamond is up to 4.0 wt.%, the resistance of the diamond is 9.628×105 Ω·cm. It is shown that the large single crystal samples are n type semiconductors. This work is helpful for the further research and application of sulfur-doped semiconductor large diamond. Project supported by the National Natural Science Foundation of China (Grant No. 51172089), the Education Department of Henan Province, China (Grant No. 12A430010), and the Fundamental Research Funds for the Universities of Henan Province, China (Grant No. NSFRF140110).

  12. Growth and characterization of large weak topological insulator Bi2TeI single crystal by Bismuth self-flux method

    Science.gov (United States)

    Ryu, Gihun; Son, Kwanghyo; Schütz, Gisela

    2016-04-01

    Two dimensional (2D) topological insulators (TIs) with a quantum spin Hall (QSH) effect feature edge states (ESs) that are topologically protected from backscattering. Bi2TeI with 2D Bismuth bilayer is one of the representative compounds of weak topological insulator. However, nobody has prepared a high quality single crystal with a millimeter size so far. Here, we have successfully synthesized a large single crystal sized up to "millimeter (~5×5 mm2)" using the Bismuth self-flux method. And we also found its giant anisotropy transport behavior in Bi2TeI of a 2D TI constructed from nontrivial Bi bilayers (Quantum Spin Hall phase) capped by a trivial Te-Bi-I layer.

  13. Electro-optical response of polymer-dispersed liquid crystal single layers of large nematic droplets oriented by rubbed teflon nanolayers

    Science.gov (United States)

    Marinov, Y. G.; Hadjichristov, G. B.; Petrov, A. G.; Marino, S.; Versace, C.; Scaramuzza, N.

    2013-02-01

    The surface orienting effect of rubbed teflon nanolayers on the morphology and electro-optical (EO) response of polymer-dispersed liquid crystal (PDLC) single layers of large nematic droplets was studied experimentally. In PDLC composites of the nematic liquid crystal (LC) E7 and NOA65 polymer, single droplets of LC with diameters as larger as 10 μm were confined in layers with a thickness of 10 μm, and the nematic director field was efficiently modified by nanostructuring teflon rubbing of the glass plates of the PDLC cell. For layered PDLCs arranged and oriented in this way, the modulated EO response by the dielectric oscillations of the nematic director exhibits a selective amplitude-frequency modulation controllable by both temperature and voltage applied, and is simply related to the LC droplet size. That may be of practical interest for PDLC-based modulators operating in the infrasound frequency range.

  14. Patterning of Perovskite Single Crystals

    KAUST Repository

    Corzo, Daniel

    2017-06-12

    As the internet-of-things hardware integration continues to develop and the requirements for electronics keep diversifying and expanding, the necessity for specialized properties other than the classical semiconductor performance becomes apparent. The success of emerging semiconductor materials depends on the manufacturability and cost as much as on the properties and performance they offer. Solution-based semiconductors are an emerging concept that offers the advantage of being compatible with large-scale manufacturing techniques and have the potential to yield high-quality electronic devices at a lower cost than currently available solutions. In this work, patterns of high-quality MAPbBr3 perovskite single crystals in specific locations are achieved through the modification of the substrate properties and solvent engineering. The fabrication of the substrates involved modifying the surface adhesion forces through functionalization with self-assembled monolayers and patterning them by photolithography processes. Spin coating and blade coating were used to deposit the perovskite solution on the modified silicon substrates. While single crystal perovskites were obtained with the modification of substrates alone, solvent engineering helped with improving the Marangoni flows in the deposited droplets by increasing the contact angle and lowering the evaporation rate, therefore controlling and improving the shape of the grown perovskite crystals. The methodology is extended to other types of perovskites such as the transparent MAPbCl3 and the lead-free MABi2I9, demonstrating the adaptability of the process. Adapting the process to electrode arrays opened up the path towards the fabrication of optoelectronic devices including photodetectors and field-effect transistors, for which the first iterations are demonstrated. Overall, manufacturing and integration techniques permitting the fabrication of single crystalline devices, such as the method in this thesis work, are

  15. Electrically Anisotropic Layered Perovskite Single Crystal

    KAUST Repository

    Li, Ting-You

    2016-04-01

    Organic-inorganic hybrid perovskites (OIHPs), which are promising materials for electronic and optoelectronic applications (1-10), have made into layered organic-inorganic hybrid perovskites (LOIHPs). These LOIHPs have been applied to thin-film transistors, solar cells and tunable wavelength phosphors (11-18). It is known that devices fabricated with single crystal exhibit the superior performance, which makes the growth of large-sized single crystals critical for future device applications (19-23). However, the difficulty in growing large-sized LOIHPs single crystal with superior electrical properties limits their practical applications. Here, we report a method to grow the centimeter-scaled LOIHP single crystal of [(HOC2H4NH3)2PbI4], demonstrating the potentials in mass production. After that, we reveal anisotropic electrical and optoelectronic properties which proved the carrier propagating along inorganic framework. The carrier mobility of in-inorganic-plane (in-plane) devices shows the average value of 45 cm2 V–1 s–1 which is about 100 times greater than the record of LOIHP devices (15), showing the importance of single crystal in device application. Moreover, the LOIHP single crystals show its ultra-short carrier lifetime of 42.7 ps and photoluminescence quantum efficiency (PLQE) of 25.4 %. We expect this report to be a start of LOIHPs for advanced applications in which the anisotropic properties are needed (24-25), and meets the demand of high-speed applications and fast-response applications.

  16. Spray printing of organic semiconducting single crystals.

    Science.gov (United States)

    Rigas, Grigorios-Panagiotis; Payne, Marcia M; Anthony, John E; Horton, Peter N; Castro, Fernando A; Shkunov, Maxim

    2016-11-22

    Single-crystal semiconductors have been at the forefront of scientific interest for more than 70 years, serving as the backbone of electronic devices. Inorganic single crystals are typically grown from a melt using time-consuming and energy-intensive processes. Organic semiconductor single crystals, however, can be grown using solution-based methods at room temperature in air, opening up the possibility of large-scale production of inexpensive electronics targeting applications ranging from field-effect transistors and light-emitting diodes to medical X-ray detectors. Here we demonstrate a low-cost, scalable spray-printing process to fabricate high-quality organic single crystals, based on various semiconducting small molecules on virtually any substrate by combining the advantages of antisolvent crystallization and solution shearing. The crystals' size, shape and orientation are controlled by the sheer force generated by the spray droplets' impact onto the antisolvent's surface. This method demonstrates the feasibility of a spray-on single-crystal organic electronics.

  17. Spray printing of organic semiconducting single crystals

    Science.gov (United States)

    Rigas, Grigorios-Panagiotis; Payne, Marcia M.; Anthony, John E.; Horton, Peter N.; Castro, Fernando A.; Shkunov, Maxim

    2016-11-01

    Single-crystal semiconductors have been at the forefront of scientific interest for more than 70 years, serving as the backbone of electronic devices. Inorganic single crystals are typically grown from a melt using time-consuming and energy-intensive processes. Organic semiconductor single crystals, however, can be grown using solution-based methods at room temperature in air, opening up the possibility of large-scale production of inexpensive electronics targeting applications ranging from field-effect transistors and light-emitting diodes to medical X-ray detectors. Here we demonstrate a low-cost, scalable spray-printing process to fabricate high-quality organic single crystals, based on various semiconducting small molecules on virtually any substrate by combining the advantages of antisolvent crystallization and solution shearing. The crystals' size, shape and orientation are controlled by the sheer force generated by the spray droplets' impact onto the antisolvent's surface. This method demonstrates the feasibility of a spray-on single-crystal organic electronics.

  18. Growth and characterization of large, high quality single crystal diamond substrates via microwave plasma assisted chemical vapor deposition

    Science.gov (United States)

    Nad, Shreya

    Single crystal diamond (SCD) substrates can be utilized in a wide range of applications. Important issues in the chemical vapor deposition (CVD) of such substrates include: shrinking of the SCD substrate area, stress and cracking, high defect density and hence low electronic quality and low optical quality due to high nitrogen impurities. The primary objective of this thesis is to begin to address these issues and to find possible solutions for enhancing the substrate dimensions and simultaneously improving the quality of the grown substrates. The deposition of SCD substrates is carried out in a microwave cavity plasma reactor via the microwave plasma assisted chemical vapor deposition technique. The operation of the reactor was first optimized to determine the safe and efficient operating regime. By adjusting the matching of the reactor cavity with the help of four internal tuning length variables, the system was further matched to operate at a maximum overall microwave coupling efficiency of ˜ 98%. Even with adjustments in the substrate holder position, the reactor remains well matched with a coupling efficiency of ˜ 95% indicating good experimental performance over a wide range of operating conditions. SCD substrates were synthesized at a high pressure of 240 Torr and with a high absorbed power density of 500 W/cm3. To counter the issue of shrinking substrate size during growth, the effect of different substrate holder designs was studied. An increase in the substrate dimensions (1.23 -- 2.5 times) after growth was achieved when the sides of the seeds were shielded from the intense microwave electromagnetic fields in a pocket holder design. Using such pocket holders, high growth rates of 16 -- 32 mum/hr were obtained for growth times of 8 -- 72 hours. The polycrystalline diamond rim deposition was minimized/eliminated from these growth runs, hence successfully enlarging the substrate size. Several synthesized CVD SCD substrates were laser cut and separated

  19. Single Crystal Surfaces

    Science.gov (United States)

    Aguilar-Santillan, Joaquin

    2014-06-01

    The present work studies (0001) Al2O3 and (111) Al2MgO4 wetting with pure molten Al by the sessile drop technique from 1073 K to 1473 K (800 °C to 1200 °C) under Ar at PO2 10-15 Pa. Al pure liquid wets a smooth and chemically homogeneous surface of an inert solid, the wetting driving force ( t, T) can be readily studied when surface solid roughness increases in the system. Both crystals planes (0001) Al2O3 and (111) Al2MgO4 have crystallographic surfaces with identical O-2 crystalline positions however considering Mg2+ content in Al2MgO4 structure may influence a reactive mode. Kinetic models results under similar experimental conditions show that Al wetting on (0001) Al2O3 is less reactive than (111) Al2MgO4, however at >1273 K (1000 °C) (0001) Al2O3 transformation occurs and a transition of wetting improves. The (111) Al2MgO4 and Al system promotes interface formations that slow its wetting process.

  20. Crystal ball single event display

    Energy Technology Data Exchange (ETDEWEB)

    Grosnick, D.; Gibson, A. [Valparaiso Univ., IN (United States). Dept. of Physics and Astronomy; Allgower, C. [Argonne National Lab., IL (United States). High Energy Physics Div.; Alyea, J. [Valparaiso Univ., IN (United States). Dept. of Physics and Astronomy]|[Argonne National Lab., IL (United States). High Energy Physics Div.

    1997-10-15

    The Single Event Display (SED) is a routine that is designed to provide information graphically about a triggered event within the Crystal Ball. The SED is written entirely in FORTRAN and uses the CERN-based HICZ graphing package. The primary display shows the amount of energy deposited in each of the NaI crystals on a Mercator-like projection of the crystals. Ten different shades and colors correspond to varying amounts of energy deposited within a crystal. Information about energy clusters is displayed on the crystal map by outlining in red the thirteen (or twelve) crystals contained within a cluster and assigning each cluster a number. Additional information about energy clusters is provided in a series of boxes containing useful data about the energy distribution among the crystals within the cluster. Other information shown on the event display include the event trigger type and data about {pi}{sup o}`s and {eta}`s formed from pairs of clusters as found by the analyzer. A description of the major features is given, along with some information on how to install the SED into the analyzer.

  1. Stacking fault energy in some single crystals

    Institute of Scientific and Technical Information of China (English)

    Aditya M.Vora

    2012-01-01

    The stacking fault energy of single crystals has been reported using the peak shift method.Presently studied all single crystals are grown by using a direct vapor transport (DVT) technique in the laboratory.The structural characterizations of these crystals are made by XRD.Considerable variations are shown in deformation (α) and growth (β) probabilities in single crystals due to off-stoichiometry,which possesses the stacking fault in the single crystal.

  2. Single crystal growth and anisotropic crystal-fluid interface tension in soft colloidal systems

    NARCIS (Netherlands)

    Nguyen, V.D.; Hu, Z.; Schall, P.

    2011-01-01

    We measure the anisotropy of the crystal-fluid interfacial free energy in soft colloidal systems. A temperature gradient is used to direct crystal nucleation and control the growth of large single crystals in order to achieve well-equilibrated crystal-fluid interfaces. Confocal microscopy is used to

  3. Large-area single-crystal graphene grown on a recrystallized Cu(111) surface by using a hole-pocket method

    Science.gov (United States)

    Phan, Hoang Danh; Jung, Jaehyuck; Kim, Youngchan; Huynh, Van Ngoc; Lee, Changgu

    2016-07-01

    We describe an efficient chemical vapor deposition (CVD) method for synthesizing graphene with a single crystal orientation on the whole surface of a copper (Cu) foil. We specifically synthesized graphene on the inner surface of a folded Cu foil, on which small holes were made for regulating the permeation and adsorption of the gases used for the synthesis. We compared the results of this method, which we call a ``hole-pocket'' method, with previously developed methods involving traditional synthesis on an open Cu foil and a Cu ``pita-pocket''. From these comparisons, we found the orientation of recrystallized Cu to depend on the shape of the Cu foil. Our hole-pocket method did not require treatment of the Cu surface with a complicated process to reduce the density of nucleation seeds in order to synthesize large hexagonal graphene grains, nor did it require the use of a single-crystalline substrate because methane passing through holes on the upper side of the hole-pocket slowly decomposed into carbon atoms and the control of the evaporation of Cu inside the foil pocket helped induce a transformation of the Cu domains to Cu(111). The current hole-pocket method resulted in domains that were both large, ranging from 2-5 mm in size, and oriented in the same manner. By extending the synthesis time, we were able to obtain continuous large-area films of single-crystalline orientation on the whole surface with dimensions of several centimeters.We describe an efficient chemical vapor deposition (CVD) method for synthesizing graphene with a single crystal orientation on the whole surface of a copper (Cu) foil. We specifically synthesized graphene on the inner surface of a folded Cu foil, on which small holes were made for regulating the permeation and adsorption of the gases used for the synthesis. We compared the results of this method, which we call a ``hole-pocket'' method, with previously developed methods involving traditional synthesis on an open Cu foil and a Cu

  4. Inkjet printing of single-crystal films

    Science.gov (United States)

    Minemawari, Hiromi; Yamada, Toshikazu; Matsui, Hiroyuki; Tsutsumi, Jun'ya; Haas, Simon; Chiba, Ryosuke; Kumai, Reiji; Hasegawa, Tatsuo

    2011-07-01

    The use of single crystals has been fundamental to the development of semiconductor microelectronics and solid-state science. Whether based on inorganic or organic materials, the devices that show the highest performance rely on single-crystal interfaces, with their nearly perfect translational symmetry and exceptionally high chemical purity. Attention has recently been focused on developing simple ways of producing electronic devices by means of printing technologies. `Printed electronics' is being explored for the manufacture of large-area and flexible electronic devices by the patterned application of functional inks containing soluble or dispersed semiconducting materials. However, because of the strong self-organizing tendency of the deposited materials, the production of semiconducting thin films of high crystallinity (indispensable for realizing high carrier mobility) may be incompatible with conventional printing processes. Here we develop a method that combines the technique of antisolvent crystallization with inkjet printing to produce organic semiconducting thin films of high crystallinity. Specifically, we show that mixing fine droplets of an antisolvent and a solution of an active semiconducting component within a confined area on an amorphous substrate can trigger the controlled formation of exceptionally uniform single-crystal or polycrystalline thin films that grow at the liquid-air interfaces. Using this approach, we have printed single crystals of the organic semiconductor 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT) (ref. 15), yielding thin-film transistors with average carrier mobilities as high as 16.4cm2V-1s-1. This printing technique constitutes a major step towards the use of high-performance single-crystal semiconductor devices for large-area and flexible electronics applications.

  5. Crystallization Growth of Single Crystal Cu by ContinuousCasting

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Crystallization growth of single-crystal Cu by continuous casting has been investigated using selfdesigned horizontal continuous casting equipment and XRD. Experimental results showed that the crystallization plane of (311), (220) and (111) were eliminated sequentially in evolutionary process. The final growth plane of crystal was (200), the direction of crystallization was [100],the growth direction of both sides of the rod inclined to axis, and the degree of deviation of direction [100] from the crystal axis was less than 10. In order to produce high quality single crystal, the solid-liquid interface morphology must be smooth, even be planar.

  6. Single Crystals (M = Fe, Co)

    Science.gov (United States)

    Cabrera-Baez, M.; Magnavita, E. Thizay; Ribeiro, Raquel A.; Avila, Marcos A.

    2014-06-01

    FeGa3 and related compounds have been subjects of recent investigation for their interesting thermoelectric, electronic, and magnetic behaviors. Here, single crystals of FeGa3- y Ge y were grown by the self-flux technique with effective y = 0, 0.09(1), 0.11(1), and 0.17(1) in order to investigate the evolution of the diamagnetic semiconducting compound FeGa3 into a ferromagnetic metal, which occurs through the electron doping and band structure modifications that result from substitution of Ge for Ga. Heat capacity and magnetization measurements reveal non-Fermi liquid behavior in the vicinity of the transition from a paramagnetic to ferromagnetic ground state, suggesting the presence of a ferromagnetic quantum critical point (FMQCP). We also present the first results of hole doping in this system by the growth of FeGa3- y Zn y single crystals, and electron- and hole doping of the related compound CoGa3 by CoGa3- y Ge y and CoGa3- y Zn y crystal growths, aiming to search for further routes to band structure and charge carrier tuning, thermoelectric optimization, and quantum criticality in this family of compounds. The ability to tune the charge carrier type warrants further investigation of the MGa3 system's thermoelectric properties above room temperature.

  7. Mechanically worked single crystal article

    Energy Technology Data Exchange (ETDEWEB)

    Gell, M. L.; Giamei, A. F.

    1985-07-09

    A single crystal nickel base superalloy component, such as a gas turbine blade is mechanically deformed at elevated temperature to improve the yield strength of a portion which is used at temperatures below 800/sup 0/ C., compared to a portion which is used at a higher temperature. A blade has a root which is deformed by 2-14% at 700/sup 0/-1100/sup 0/ C. and an airfoil which is not deformed. The root yield strength is increased 15-50% while the airfoil creep strength is maintained.

  8. Growth morphology and structural characteristic of C70single crystals

    Institute of Scientific and Technical Information of China (English)

    周维亚; 解思深; 吴源; 常保和; 王刚; 钱露茜

    1999-01-01

    Large size C70 single crystals with the dimension of more than 5 mm are grown from the vapor phase by controlling nucleation. X-ray diffraction and electron diffraction confirm that in the C70 single crystal a phase of the hexagonal close-packed (hcp) structure coexists with a minor face-center-cubic (fcc) phase at room temperature. The morphologies and their formation mechanism of the C70 single crystals are investigated by means of scanning electron microscopy and optical microscopy. The influence of growth conditions on the morphologies of C70 single crystals is discussed.

  9. Development of novel growth methods for halide single crystals

    Science.gov (United States)

    Yokota, Yuui; Kurosawa, Shunsuke; Shoji, Yasuhiro; Ohashi, Yuji; Kamada, Kei; Yoshikawa, Akira

    2017-03-01

    We developed novel growth methods for halide scintillator single crystals with hygroscopic nature, Halide micro-pulling-down [H-μ-PD] method and Halide Vertical Bridgman [H-VB] method. The H-μ-PD method with a removable chamber system can grow a single crystal of halide scintillator material with hygroscopicity at faster growth rate than the conventional methods. On the other hand, the H-VB method can grow a large bulk single crystal of halide scintillator without a quartz ampule. CeCl3, LaBr3, Ce:LaBr3 and Eu:SrI2 fiber single crystals could be grown by the H-μ-PD method and Eu:SrI2 bulk single crystals of 1 and 1.5 inch in diameter could be grown by the H-VB method. The grown fiber and bulk single crystals showed comparable scintillation properties to the previous reports using the conventional methods.

  10. Azeotropic binary solvent mixtures for preparation of organic single crystals

    NARCIS (Netherlands)

    Li, X.; Kjellander, B.K.C.; Anthony, J.E.; Bastiaansen, C.W.M.; Broer, D.J.; Gelinck, G.H.

    2009-01-01

    Here, a new approach is introduced to prepare large single crystals of π-conjugated organic molecules from solution. Utilizing the concept of azeotropism, single crystals of tri-isopropylsilylethynyl pentacene (TIPS-PEN) with dimensions up to millimeters are facilely self-assembled from homogeneous

  11. Growth of centimeter-sized C60 single crystals

    Institute of Scientific and Technical Information of China (English)

    李宏年; 徐亚伯; 张建华; 何丕模; 李海洋; 吴太权; 鲍世宁

    2001-01-01

    C60 single crystals larger than one centimeter in size are grown with vapor method by nucleation control and by a proper time-dependent temperature process which allows only one nucleus growing larger and larger. X-ray diffraction patterns exhibit the high quality of the sample. As an example of the applications of large single C60 crystals,svnchrotron radiation photoemission spectra are measured to investigate the fine structure of valence bands of C60 crystals.

  12. Additive manufacturing of micrometric crystallization vessels and single crystals

    Science.gov (United States)

    Halevi, Oded; Jiang, Hui; Kloc, Christian; Magdassi, Shlomo

    2016-11-01

    We present an all-additive manufacturing method that is performed at mild conditions, for the formation of organic single crystals at specific locations, without any photolithography prefabrication process. The method is composed of two steps; inkjet printing of a confinement frame, composed of a water soluble electrolyte. Then, an organic semiconductor solution is printed within the confinement to form a nucleus at a specific location, followed by additional printing, which led to the growth of a single crystal. The specific geometry of the confinement enables control of the specific locations of the single crystals, while separating the nucleation and crystal growth processes. By this method, we printed single crystals of perylene, which are suitable for the formation of OFETs. Moreover, since this method is based on a simple and controllable wet deposition process, it enables formation of arrays of single crystals at specific locations, which is a prerequisite for mass production of active organic elements on flexible substrates.

  13. Polarization maintaining large-mode area photonic crystal fibre

    DEFF Research Database (Denmark)

    Folkenberg, Jacob Riis; Nielsen, Martin Dybendal; Mortensen, N.A.

    2004-01-01

    We report on a polarization maintaining large mode area photonic crystal fiber. Unlike, previous work on polarization maintaining photonic crystal fibers, birefringence is introduced using stress applying parts. This has allowed us to realize fibers, which are both single mode at any wavelength a...

  14. Relaxor-PT Single Crystal Piezoelectric Sensors

    OpenAIRE

    Xiaoning Jiang; Jinwook Kim; Kyugrim Kim

    2014-01-01

    Relaxor-PbTiO3 piezoelectric single crystals have been widely used in a broad range of electromechanical devices, including piezoelectric sensors, actuators, and transducers. This paper reviews the unique properties of these single crystals for piezoelectric sensors. Design, fabrication and characterization of various relaxor-PT single crystal piezoelectric sensors and their applications are presented and compared with their piezoelectric ceramic counterparts. Newly applicable fields and futu...

  15. Large-bandwidth planar photonic crystal waveguides

    DEFF Research Database (Denmark)

    Søndergaard, Thomas; Lavrinenko, Andrei

    2002-01-01

    A general design principle is presented for making finite-height photonic crystal waveguides that support leakage-free guidance of light over large frequency intervals. The large bandwidth waveguides are designed by introducing line defects in photonic crystal slabs, where the material in the line...... defect has appropriate dispersion properties relative to the photonic crystal slab material surrounding the line defect. A three-dimensional theoretical analysis is given for large-bandwidth waveguide designs based on a silicon-air photonic crystal slab suspended in air. In one example, the leakage...

  16. Charge transport in single crystal organic semiconductors

    Science.gov (United States)

    Xie, Wei

    Organic electronics have engendered substantial interest in printable, flexible and large-area applications thanks to their low fabrication cost per unit area, chemical versatility and solution processability. Nevertheless, fundamental understanding of device physics and charge transport in organic semiconductors lag somewhat behind, partially due to ubiquitous defects and impurities in technologically useful organic thin films, formed either by vacuum deposition or solution process. In this context, single-crystalline organic semiconductors, or organic single crystals, have therefore provided the ideal system for transport studies. Organic single crystals are characterized by their high chemical purity and outstanding structural perfection, leading to significantly improved electrical properties compared with their thin-film counterparts. Importantly, the surfaces of the crystals are molecularly flat, an ideal condition for building field-effect transistors (FETs). Progress in organic single crystal FETs (SC-FETs) is tremendous during the past decade. Large mobilities ~ 1 - 10 cm2V-1s-1 have been achieved in several crystals, allowing a wide range of electrical, optical, mechanical, structural, and theoretical studies. Several challenges still remain, however, which are the motivation of this thesis. The first challenge is to delineate the crystal structure/electrical property relationship for development of high-performance organic semiconductors. This thesis demonstrates a full spectrum of studies spanning from chemical synthesis, single crystal structure determination, quantum-chemical calculation, SC-OFET fabrication, electrical measurement, photoelectron spectroscopy characterization and extensive device optimization in a series of new rubrene derivatives, motivated by the fact that rubrene is a benchmark semiconductor with record hole mobility ~ 20 cm2V-1s-1. With successful preservation of beneficial pi-stacking structures, these rubrene derivatives form

  17. Perpetually self-propelling chiral single crystals.

    Science.gov (United States)

    Panda, Manas K; Runčevski, Tomče; Husain, Ahmad; Dinnebier, Robert E; Naumov, Panče

    2015-02-11

    When heated, single crystals of enantiomerically pure D- and L-pyroglutamic acid (PGA) are capable of recurring self-actuation due to rapid release of latent strain during a structural phase transition, while the racemate is mechanically inactive. Contrary to other thermosalient materials, where the effect is accompanied by crystal explosion due to ejection of debris or splintering, the chiral PGA crystals respond to internal strain with unprecedented robustness and can be actuated repeatedly without deterioration. It is demonstrated that this superelasticity is attained due to the low-dimensional hydrogen-bonding network which effectively accrues internal strain to elicit propulsion solely by elastic deformation without disintegration. One of the two polymorphs (β) associated with the thermosalient phase transition undergoes biaxial negative thermal expansion (αa = -54.8(8) × 10(-6) K(-1), αc = -3.62(8) × 10(-6) K(-1)) and exceptionally large uniaxial thermal expansion (αb = 303(1) × 10(-6) K(-1)). This second example of a thermosalient solid with anomalous expansion indicates that the thermosalient effect can be expected for first-order phase transitions in soft crystals devoid of an extended 3D hydrogen-bonding network that undergo strongly anisotropic thermal expansion around the phase transition.

  18. Synthesis and structural characterization of a single-crystal to single-crystal transformable coordination polymer.

    Science.gov (United States)

    Tian, Yuyang; Allan, Phoebe K; Renouf, Catherine L; He, Xiang; McCormick, Laura J; Morris, Russell E

    2014-01-28

    A single-crystal to single-crystal transformable coordination polymer compound was hydrothermally synthesized. The structural rearrangement is induced by selecting a ligand that contains both strong and weaker coordinating groups. Both hydrated and dehydrated structures were determined by single crystal X-ray analysis.

  19. On the growth of calcium tartrate tetrahydrate single crystals

    Indian Academy of Sciences (India)

    X Sahaya Shajan; C Mahadevan

    2004-08-01

    Calcium tartrate single crystals were grown using silica gel as the growth medium. Calcium formate mixed with formic acid was taken as the supernatant solution. It was observed that the nucleation density was reduced and the size of the crystals was improved to a large extent compared to the conventional way of growing calcium tartrate crystals with calcium chloride. The role played by formate–formic acid on the growth of crystals is discussed. The grown crystals were characterized by atomic absorption spectroscopy (AAS), X-ray diffraction analysis (XRD), microhardness measurement, Fourier transform infrared spectroscopy (FTIR), thermogravimetry (TG) and differential thermal analysis (DTA). The results obtained are compared with the previous work.

  20. Ultratough single crystal boron-doped diamond

    Science.gov (United States)

    Hemley, Russell J [Carnegie Inst. for Science, Washington, DC ; Mao, Ho-Kwang [Carnegie Inst. for Science, Washington, DC ; Yan, Chih-Shiue [Carnegie Inst. for Science, Washington, DC ; Liang, Qi [Carnegie Inst. for Science, Washington, DC

    2015-05-05

    The invention relates to a single crystal boron doped CVD diamond that has a toughness of at least about 22 MPa m.sup.1/2. The invention further relates to a method of manufacturing single crystal boron doped CVD diamond. The growth rate of the diamond can be from about 20-100 .mu.m/h.

  1. Adhesion of single crystals on modified surfaces in crystallization fouling

    Science.gov (United States)

    Mayer, Moriz; Augustin, Wolfgang; Scholl, Stephan

    2012-12-01

    In crystallization fouling it has been observed that during a certain initial phase the fouling is formed by a non-uniform layer consisting of a population of single crystals. These single crystals are frequently formed by inverse soluble salts such as CaCO3. During heterogeneous nucleation and heterogeneous growth an interfacial area between the crystal and the heat transfer surface occurs. The development of this interfacial area is the reason for the adhesion of each single crystal and of all individual crystals, once a uniform layer has been built up. The emerging interfacial area is intrinsic to the heterogeneous nucleation of crystals and can be explained by the thermodynamic principle of the minimum of the Gibbs free energy. In this study CaCO3 crystals were grown heterogeneously on untreated and on modified surfaces inside a flow channel. An untreated stainless steel (AISI 304) surface was used as a reference. Following surface modifications were investigated: enameled and electropolished stainless steel as well as diamond-like-carbon based coatings on stainless steel substrate. The adhesion was measured through a novel measurement technique using a micromanipulator to shear off single crystals from the substrate which was fixed to a spring table inside a SEM.

  2. Investigation on Growth and Optical Properties of LVCC Single Crystals

    Directory of Open Access Journals (Sweden)

    N. Sheen Kumar

    2014-11-01

    Full Text Available L-valine cadmium chloride (LVCC single crystals were grown by slow evaporation technique with different concentrations (0.25, 0.5, 0.75 and 1.0 mole of CdCl2. All the grown crystals were subjected to single crystal X-ray diffraction analysis. Solid state parameters were calculated for the grown crystals. The optical properties of the crystals were investigated by UV-Vis. absorption spectroscopy. The results revealed that, the wider bandgap and large transparency in the visible region along with higher polarizability of the grown crystals are highly useful in optoelectronic devices. Also according to our needs, one can tune the optical and electrical properties of LVCC crystals by adjusting the concentration of CdCl2 in LVCC.

  3. Benzothiazolium Single Crystals: A New Class of Nonlinear Optical Crystals with Efficient THz Wave Generation.

    Science.gov (United States)

    Lee, Seung-Heon; Lu, Jian; Lee, Seung-Jun; Han, Jae-Hyun; Jeong, Chan-Uk; Lee, Seung-Chul; Li, Xian; Jazbinšek, Mojca; Yoon, Woojin; Yun, Hoseop; Kang, Bong Joo; Rotermund, Fabian; Nelson, Keith A; Kwon, O-Pil

    2017-08-01

    Highly efficient nonlinear optical organic crystals are very attractive for various photonic applications including terahertz (THz) wave generation. Up to now, only two classes of ionic crystals based on either pyridinium or quinolinium with extremely large macroscopic optical nonlinearity have been developed. This study reports on a new class of organic nonlinear optical crystals introducing electron-accepting benzothiazolium, which exhibit higher electron-withdrawing strength than pyridinium and quinolinium in benchmark crystals. The benzothiazolium crystals consisting of new acentric core HMB (2-(4-hydroxy-3-methoxystyryl)-3-methylbenzo[d]thiazol-3-ium) exhibit extremely large macroscopic optical nonlinearity with optimal molecular ordering for maximizing the diagonal second-order nonlinearity. HMB-based single crystals prepared by simple cleaving method satisfy all required crystal characteristics for intense THz wave generation such as large crystal size with parallel surfaces, moderate thickness and high optical quality with large optical transparency range (580-1620 nm). Optical rectification of 35 fs pulses at the technologically very important wavelength of 800 nm in 0.26 mm thick HMB crystal leads to one order of magnitude higher THz wave generation efficiency with remarkably broader bandwidth compared to standard inorganic 0.5 mm thick ZnTe crystal. Therefore, newly developed HMB crystals introducing benzothiazolium with extremely large macroscopic optical nonlinearity are very promising materials for intense broadband THz wave generation and other nonlinear optical applications. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  4. Crystal growth and structural analysis of zirconium sulphoselenide single crystals

    Indian Academy of Sciences (India)

    K R Patel; R D Vaidya; M S Dave; S G Patel

    2008-08-01

    A series of zirconium sulphoselenide (ZrSSe3–, where = 0, 0.5, 1, 1.5, 2, 2.5, 3) single crystals have been grown by chemical vapour transport technique using iodine as a transporting agent. The optimum condition for the growth of these crystals is given. The stoichiometry of the grown crystals were confirmed on the basis of energy dispersive analysis by X-ray (EDAX) and the structural characterization was accomplished by X-ray diffraction (XRD) studies. The crystals are found to possess monoclinic structure. The lattice parameters, volume, particle size and X-ray density have been carried out for these crystals. The effect of sulphur proportion on the lattice parameter, unit cell volume and X-ray density in the series of ZrSSe3– single crystals have been studied and found to decrease in all these parameters with rise in sulphur proportion. The grown crystals were examined under optical zoom microscope for their surface topography study. Hall effect measurements were carried out on grown crystals at room temperature. The negative value of Hall coefficient implies that these crystals are -type in nature. The conductivity is found to decrease with increase of sulphur content in the ZrSSe3– series. The electrical resistivity parallel to c-axis as well as perpendicular to -axis have been carried out in the temperature range 303–423 K. The results obtained are discussed in detail.

  5. Relaxor-PT Single Crystal Piezoelectric Sensors

    Directory of Open Access Journals (Sweden)

    Xiaoning Jiang

    2014-07-01

    Full Text Available Relaxor-PbTiO3 piezoelectric single crystals have been widely used in a broad range of electromechanical devices, including piezoelectric sensors, actuators, and transducers. This paper reviews the unique properties of these single crystals for piezoelectric sensors. Design, fabrication and characterization of various relaxor-PT single crystal piezoelectric sensors and their applications are presented and compared with their piezoelectric ceramic counterparts. Newly applicable fields and future trends of relaxor-PT sensors are also suggested in this review paper.

  6. Growing Single Crystals of Compound Semiconductors

    Science.gov (United States)

    Naumann, Robert J.; Lehoczky, Sandor L.; Frazier, Donald O.

    1987-01-01

    Defect reduced by preventing melt/furnace contact and suppressing convention. Large crystals of compound semiconductors with few defects grown by proposed new method. Such materials as gallium arsenide and cadmium telluride produced, with quality suitable for very-large-scale integrated circuits or for large focal-plane arrays of photodetectors. Method used on small scale in Earth gravity, but needs microgravity to provide crystals large enough for industrial use.

  7. Large-scale polyol synthesis of single-crystal bismuth nanowires and the role of NaOH in the synthesis process

    Energy Technology Data Exchange (ETDEWEB)

    Wang Yewu [Department of Physics, Zhejiang University, Hangzhou 310027 (China); Kim, Kwang S [Center for Superfunctional Materials, Department of Chemistry, Pohang University of Science and Technology, San 31, Hyojadong, Namgu, Pohang 790-784 (Korea, Republic of)], E-mail: yewuwang@zju.edu.cn, E-mail: kim@postech.ac.kr

    2008-07-02

    A modified polyol process is introduced for the production of single-crystal bismuth (Bi) nanowires with uniform diameters along each wire in relatively high yield. The appropriate amount of NaOH in the solution reacts with Bi{sup 3+} to form water-soluble complexing ions BiO{sub 2}{sup -}. The tiny Bi nanoparticles formed at the initial stage could serve as seeds for the subsequent growth of Bi nanostructures in the refluxing process with the aid of PVP. We find that the amount of NaOH determines the reduction rate of BiO{sub 2}{sup -}, which influences the morphologies of the synthesized Bi nanostructures. High reduction rates result in nanowires and nanoparticles, while low reduction rates result in nanoplates.

  8. Large-scale polyol synthesis of single-crystal bismuth nanowires and the role of NaOH in the synthesis process.

    Science.gov (United States)

    Wang, Yewu; Kim, Kwang S

    2008-07-01

    A modified polyol process is introduced for the production of single-crystal bismuth (Bi) nanowires with uniform diameters along each wire in relatively high yield. The appropriate amount of NaOH in the solution reacts with Bi(3+) to form water-soluble complexing ions BiO(2)(-). The tiny Bi nanoparticles formed at the initial stage could serve as seeds for the subsequent growth of Bi nanostructures in the refluxing process with the aid of PVP. We find that the amount of NaOH determines the reduction rate of BiO(2)(-), which influences the morphologies of the synthesized Bi nanostructures. High reduction rates result in nanowires and nanoparticles, while low reduction rates result in nanoplates.

  9. Defect free single crystal thin layer

    KAUST Repository

    Elafandy, Rami Tarek Mahmoud

    2016-01-28

    A gallium nitride film can be a dislocation free single crystal, which can be prepared by irradiating a surface of a substrate and contacting the surface with an etching solution that can selectively etch at dislocations.

  10. Neutron forward diffraction by single crystal prisms

    Indian Academy of Sciences (India)

    Sohrab Abbas; Apoorva G Wagh; Markus Strobl; Wolfgang Treimer

    2008-11-01

    We have derived analytic expressions for the deflection as well as transmitted fraction of monochromatic neutrons forward diffracted by a single crystal prism. In the vicinity of a Bragg reflection, the neutron deflection deviates sharply from that for an amorphous prism, exhibiting three orders of magnitude greater sensitivity to the incidence angle. We have measured the variation of neutron deflection and transmission across a Bragg reflection, for several single crystal prisms. The results agree well with theory.

  11. Light Emitting Transistors of Organic Single Crystals

    Science.gov (United States)

    Iwasa, Yoshihiro

    2009-03-01

    Organic light emitting transistors (OLETs) are attracting considerable interest as a novel function of organic field effect transistors (OFETs). Besides a smallest integration of light source and current switching devices, OLETs offer a new opportunity in the fundamental research on organic light emitting devices. The OLET device structure allows us to use organic single crystals, in contrast to the organic light emitting diodes (OLEDs), the research of which have been conducted predominantly on polycrystalline or amorphous thin films. In the case of OFETs, use of single crystals have produced a significant amount of benefits in the studies of pursuit for the highest performance limit of FETs, intrinsic transport mechanism in organic semiconductors, and application of the single crystal transistors. The study on OLETs have been made predominantly on polycrystalline films or multicomponent heterojunctions, and single crystal study is still limited to tetracene [1] and rubrene [2], which are materials with relatively high mobility, but with low photoluminescence efficiency. In this paper, we report fabrication of single crystal OLETs of several kinds of highly luminescent molecules, emitting colorful light, ranging from blue to red. Our strategy is single crystallization of monomeric or oligomeric molecules, which are known to have a very high photoluminescence efficiency. Here we report the result on single crystal LETs of rubrene (red), 4,4'-bis(diphenylvinylenyl)-anthracene (green), 1,4-bis(5-phenylthiophene-2-yl)benzene (AC5) (green), and 1,3,6,8-tetraphenylpyrene (TPPy) (blue), all of which displayed ambipolar transport as well as peculiar movement of voltage controlled movement of recombination zone, not only from the surface of the crystal but also from the edges of the crystals, indicting light confinement inside the crystal. Realization of ambipolar OLET with variety of single crystals indicates that the fabrication method is quite versatile to various light

  12. Cladded single crystal fibers for high power fiber lasers

    Science.gov (United States)

    Kim, W.; Shaw, B.; Bayya, S.; Askins, C.; Peele, J.; Rhonehouse, D.; Meyers, J.; Thapa, R.; Gibson, D.; Sanghera, J.

    2016-09-01

    We report on the recent progress in the development of cladded single crystal fibers for high power single frequency lasers. Various rare earth doped single crystal YAG fibers with diameters down to 17 μm with length > 1 m have been successfully drawn using a state-of-the-art Laser Heated Pedestal Growth system. Single and double cladding on rare earth doped YAG fibers have been developed using glasses where optical and physical properties were precisely matched to doped YAG core single crystal fiber. The double clad Yb:YAG fiber structures have dimensions analogous to large mode area (LMA) silica fiber. We also report successful fabrications of all crystalline core/clad fibers where thermal and optical properties are superior over glass cladded YAG fibers. Various fabrication methods, optical characterization and gain measurements on these cladded YAG fibers are reported.

  13. High-quality single crystals for neutron experiments

    Indian Academy of Sciences (India)

    Geetha Balakrishnan

    2008-10-01

    To make headway on any problem in physics, high-quality single crystals are required. In this talk, special emphasis will be placed on the crystal growth of various oxides (superconductors and magnetic materials), borides and carbides using the image furnaces at Warwick. The floating zone method of crystal growth used in these furnaces produces crystals of superior quality, circumventing many of the problems associated with, for example, flux growth from the melt. This method enables the growth of large volumes of crystal, a prerequisite especially for experiments using neutron beams. Some examples of experimental results from crystals grown at Warwick, selected from numerous in-house studies and our collaborative research projects with other UK and international groups will be discussed.

  14. Crystal-Orientation Dependent Evolution of Edge Dislocations from a Void in Single Crystal Gu

    Institute of Scientific and Technical Information of China (English)

    SONG Zhen-Fei; ZHU Wen-Jun; DENG Xiao-Liang; HE Hong-Liang

    2006-01-01

    @@ The micro-void growth by dislocation emission under tensile loading is explored with focus on the influence of crystal orientations. Based on the elastic theory, a dislocation emission criterion is formulated. It is predicted that the preferential location of dislocation nucleation and its threshold stress are dependent on the crystal orientation.Large-scale molecular dynamics (MD) simulations are also performed for single crystal copper to illustrate the dislocation evolution pattern associated with a nano-void growth. The results are in line with those given by the theoretical prediction. As revealed by MD simulations, the characteristics of void growth at micro-scale depend greatly on the crystal-orientation.

  15. Method of making macrocrystalline or single crystal semiconductor material

    Science.gov (United States)

    Shlichta, P. J. (Inventor); Holliday, R. J. (Inventor)

    1986-01-01

    A macrocrystalline or single crystal semiconductive material is formed from a primary substrate including a single crystal or several very large crystals of a relatively low melting material. This primary substrate is deposited on a base such as steel or ceramic, and it may be formed from such metals as zinc, cadmium, germanium, aluminum, tin, lead, copper, brass, magnesium silicide, or magnesium stannide. These materials generally have a melting point below about 1000 C and form on the base crystals the size of fingernails or greater. The primary substrate has an epitaxial relationship with a subsequently applied layer of material, and because of this epitaxial relationship, the material deposited on the primary substrate will have essentially the same crystal size as the crystals in the primary substrate. If required, successive layers are formed, each of a material which has an epitaxial relationship with the previously deposited layer, until a layer is formed which has an epitaxial relationship with the semiconductive material. This layer is referred to as the epitaxial substrate, and its crystals serve as sites for the growth of large crystals of semiconductive material. The primary substrate is passivated to remove or otherwise convert it into a stable or nonreactive state prior to deposition of the seconductive material.

  16. The growth of sapphire single crystals

    Directory of Open Access Journals (Sweden)

    STEVAN DJURIC

    2001-06-01

    Full Text Available Sapphire (Al2O3 single crystals were grown by the Czochralski technique both in air and argon atmospheres. The conditions for growing sapphire single crystals were calculated by using a combination of Reynolds and Grashof numbers. Acritical crystal diameter dc = 20 mm and the critical rate of rotation wc = 20 rpm were calculated from the hydrodynamics of the melt. The value of the rate of crystal growth was experimentally found to be 3.5 mm/h. According to our previous experiments, it was confirmed that three hours exposures to conc. H3PO4 at 593 K was suitable for chemical polishing. Also, three hours exposure to conc.H3PO4 at 523 K was found to be a suitable etching solution. The lattice parameters a = 0.47573 nm and c = 1.29893 nm were determined by X-ray powder diffraction. The obtained results are discussed and compared with published data.

  17. Neutron detection with single crystal organic scintillators

    Energy Technology Data Exchange (ETDEWEB)

    Zaitseva, N; Newby, J; Hamel, S; Carman, L; Faust, M; Lordi, V; Cherepy, N; Stoeffl, W; Payne, S

    2009-07-15

    Detection of high-energy neutrons in the presence of gamma radiation background utilizes pulse-shape discrimination (PSD) phenomena in organics studied previously only with limited number of materials, mostly liquid scintillators and single crystal stilbene. The current paper presents the results obtained with broader varieties of luminescent organic single crystals. The studies involve experimental tools of crystal growth and material characterization in combination with the advanced computer modeling, with the final goal of better understanding the relevance between the nature of the organic materials and their PSD properties. Special consideration is given to the factors that may diminish or even completely obscure the PSD properties in scintillating crystals. Among such factors are molecular and crystallographic structures that determine exchange coupling and exciton mobility in organic materials and the impurity effect discussed on the examples of trans-stilbene, bibenzyl, 9,10-diphenylanthracene and diphenylacetylene.

  18. Hybrid gold single crystals incorporating amino acids

    CERN Document Server

    Chen, Linfeng; Weber, Eva; Fitch, Andy N; Pokroy, Boaz

    2016-01-01

    Composite hybrid gold crystals are of profound interest in various research areas ranging from materials science to biology. Their importance is due to their unique properties and potential implementation, for example in sensing or in bio-nanomedicine. Here we report on the formation of hybrid organic-metal composites via the incorporation of selected amino acids histidine, aspartic acid, serine, glutamine, alanine, cysteine, and selenocystine into the crystal lattice of single crystals of gold. We used electron microscopy, chemical analysis and high-resolution synchrotron powder X ray diffraction to examine these composites. Crystal shape, as well as atomic concentrations of occluded amino acids and their impact on the crystal structure of gold, were determined. Concentration of the incorporated amino acid was highest for cysteine, followed by serine and aspartic acid. Our results indicate that the incorporation process probably occurs through a complex interaction of their individual functional groups with ...

  19. An analytical model for porous single crystals with ellipsoidal voids

    Science.gov (United States)

    Mbiakop, A.; Constantinescu, A.; Danas, K.

    2015-11-01

    A rate-(in)dependent constitutive model for porous single crystals with arbitrary crystal anisotropy (e.g., FCC, BCC, HCP, etc.) containing general ellipsoidal voids is developed. The proposed model, denoted as modified variational model (MVAR), is based on the nonlinear variational homogenization method, which makes use of a linear comparison porous material to estimate the response of the nonlinear porous single crystal. Periodic multi-void finite element simulations are used in order to validate the MVAR for a large number of parameters including cubic (FCC, BCC) and hexagonal (HCP) crystal anisotropy, various creep exponents (i.e., nonlinearity), several stress triaxiality ratios, general void shapes and orientations and various porosity levels. The MVAR model, which involves a priori no calibration parameters, is found to be in good agreement with the finite element results for all cases considered in the rate-dependent context. The model is then used in a predictive manner to investigate the complex response of porous single crystals in several cases with strong coupling between the anisotropy of the crystal and the (morphological) anisotropy induced by the shape and orientation of the voids. Finally, a simple way of calibrating the MVAR with just two adjustable parameters is depicted in the rate-independent context so that an excellent agreement with the FE simulation results is obtained. In this last case, this proposed model can be thought as a generalization of the Gurson model in the context of porous single crystals and general ellipsoidal void shapes and orientations.

  20. Anisotropy of nickel-base superalloy single crystals

    Science.gov (United States)

    Mackay, R. A.; Maier, R. D.; Dreshfield, R. L.

    1980-01-01

    The effects of crystal orientation on the mechanical properties of single crystals of the nickel-based superalloy Mar-M247 are investigated. Tensile tests at temperatures from 23 to 1093 C and stress rupture tests at temperatures from 760 to 1038 C were performed for 52 single crystals at various orientations. During tensile testing between 23 and 760 C, single crystals with high Schmid factors were found to be favorably oriented for slip and to exhibit lower strength and higher ductility than those with low Schmid factors. Crystals which required large rotations to become oriented for cross slip were observed to have the shortest stress rupture lives at 760 C, while those which required little or no rotation had the longest lives. In addition, stereographic triangles obtained for Mar-M247 and Mar-M200 single crystals reveal that crystals with orientations near the -111 had the highest lives, those near the 001 had high lives, and those near the 011 had low lives.

  1. Anisotropy of nickel-base superalloy single crystals

    Science.gov (United States)

    Mackay, R. A.; Maier, R. D.; Dreshfield, R. L.

    1980-01-01

    The effects of crystal orientation on the mechanical properties of single crystals of the nickel-based superalloy Mar-M247 are investigated. Tensile tests at temperatures from 23 to 1093 C and stress rupture tests at temperatures from 760 to 1038 C were performed for 52 single crystals at various orientations. During tensile testing between 23 and 760 C, single crystals with high Schmid factors were found to be favorably oriented for slip and to exhibit lower strength and higher ductility than those with low Schmid factors. Crystals which required large rotations to become oriented for cross slip were observed to have the shortest stress rupture lives at 760 C, while those which required little or no rotation had the longest lives. In addition, stereographic triangles obtained for Mar-M247 and Mar-M200 single crystals reveal that crystals with orientations near the -111 had the highest lives, those near the 001 had high lives, and those near the 011 had low lives.

  2. Single chirality through crystal grinding

    NARCIS (Netherlands)

    Noorduin, W.L.

    2010-01-01

    The properties of chiral molecules in living organisms can be different for left- and right-handed molecules. Therefore, ways to produce molecules of single handedness are of paramount importance, especially for economical, high yielding processes to synthesize pharmaceutical compounds that must be

  3. The growth of Nd: YAG single crystals

    Directory of Open Access Journals (Sweden)

    ANDREJA VALCIC

    2002-04-01

    Full Text Available Y3Al5O12 doped with 0.8 % wt. Nd (Nd:YAG single crystals were grown by the Czochralski technique under an argon atmosphere. The conditions for growing the Nd: YAG single crystals were calculated by using a combination of Reynolds and Grashof numbers. The critical crystal diameter and the critical rate of rotation were calculated from the hydrodynamics of the melt. The crystal diameter Dc = 1.5 cm remained constant during the crystal growth, while the critical rate of rotation changed from wc = 38 rpm after necking to wc = 13 rpm at the end of the crystal. The value of the rate of crystal growth was experimentally found to be 0.8–1.0 mm/h. According to our previous experiments, it was confirmed that 20 min exposure to conc. H3PO4 at 603 K was suitable for chemical polishing. Also, one-hour exposure to conc. H3PO4 at 493 K was found to be suitable for etching. The lattice parameter a = 1.201 (1 nm was determined by X-ray powder diffraction. The obtained results are discussed and compared with published data.

  4. Large deformation behavior of fat crystal networks

    NARCIS (Netherlands)

    Kloek, W.; Vliet, van T.; Walstra, P.

    2005-01-01

    Compression and wire-cutting experiments on dispersions of fully hydrogenated palm oil in sunflower oil with varying fraction solid fat were carried out to establish which parameters are important for the large deformation behavior of fat crystal networks. Compression experiments showed that the app

  5. Large three-dimensional photonic crystals based on monocrystalline liquid crystal blue phases.

    Science.gov (United States)

    Chen, Chun-Wei; Hou, Chien-Tsung; Li, Cheng-Chang; Jau, Hung-Chang; Wang, Chun-Ta; Hong, Ching-Lang; Guo, Duan-Yi; Wang, Cheng-Yu; Chiang, Sheng-Ping; Bunning, Timothy J; Khoo, Iam-Choon; Lin, Tsung-Hsien

    2017-09-28

    Although there have been intense efforts to fabricate large three-dimensional photonic crystals in order to realize their full potential, the technologies developed so far are still beset with various material processing and cost issues. Conventional top-down fabrications are costly and time-consuming, whereas natural self-assembly and bottom-up fabrications often result in high defect density and limited dimensions. Here we report the fabrication of extraordinarily large monocrystalline photonic crystals by controlling the self-assembly processes which occur in unique phases of liquid crystals that exhibit three-dimensional photonic-crystalline properties called liquid-crystal blue phases. In particular, we have developed a gradient-temperature technique that enables three-dimensional photonic crystals to grow to lateral dimensions of ~1 cm (~30,000 of unit cells) and thickness of ~100 μm (~ 300 unit cells). These giant single crystals exhibit extraordinarily sharp photonic bandgaps with high reflectivity, long-range periodicity in all dimensions and well-defined lattice orientation.Conventional fabrication approaches for large-size three-dimensional photonic crystals are problematic. By properly controlling the self-assembly processes, the authors report the fabrication of monocrystalline blue phase liquid crystals that exhibit three-dimensional photonic-crystalline properties.

  6. Advanced Electroactive Single Crystal and Polymer Actuator Concepts for Passive Optics Project

    Data.gov (United States)

    National Aeronautics and Space Administration — TRS Technologies proposes large stroke and high precision piezoelectric single crystal and electroactive polymer actuator concepts?HYBrid Actuation System (HYBAS)...

  7. First Single-Crystal Mullite Fibers

    Science.gov (United States)

    1997-01-01

    Ceramic-matrix composites strengthened by suitable fiber additions are being developed for high-temperature use, particularly for aerospace applications. New oxide-based fibers, such as mullite, are particularly desirable because of their resistance to high-temperature oxidative environments. Mullite is a candidate material in both fiber and matrix form. The primary objective of this work was to determine the growth characteristics of single-crystal mullite fibers produced by the laser-heated floating zone method. Directionally solidified fibers with nominal mullite compositions of 3Al2O3 2SiO2 were grown by the laser-heated floating zone method at the NASA Lewis Research Center. SEM analysis revealed that the single-crystal fibers grown in this study were strongly faceted and that the facets act as critical flaws, limiting fiber strength. The average fiber tensile strength is 1.15 GPa at room temperature. The mullite fibers exhibit superior strength retention (80 percent of their room temperature tensile strength at 1450 C). Examined by transmission electron microscopy, these mullite single crystals are free of dislocations, low-angle boundaries, and voids. In addition, they show a high degree of oxygen vacancy ordering. High-resolution digital images from an optical microscope furnish evidence of the formation of a liquid-liquid miscibility gap during crystal growth. These images represent the first experimental evidence of liquid immiscibility for these compositions and temperatures. Continuing investigation with controlled seeding of mullite single crystals is planned.

  8. Friction stir welding of single crystal aluminium

    DEFF Research Database (Denmark)

    Fonda, Richard Warren; Wert, John A.; Reynolds, A.P.

    2007-01-01

    Friction stir welds were prepared in different orientations in an aluminium single crystal. The welds were quenched to preserve the microstructure surrounding the tool and then electron backscattered diffraction was used to reveal the generation of grain boundaries and the evolution of crystallog......Friction stir welds were prepared in different orientations in an aluminium single crystal. The welds were quenched to preserve the microstructure surrounding the tool and then electron backscattered diffraction was used to reveal the generation of grain boundaries and the evolution...

  9. Radiation piezoelectric effect in germanium single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Kikoin, I.K.; Kikoin, L.I.; Lazarev, S.D.

    1977-06-01

    Irradiation with ionizing particles of a germanium single crystal and uniaxial deformation at right-angles to the particle beam produced an electric field and a corresponding emf due to the radiation piezoelectric effect. Measurements were carried out when such a single crystal was irradiated with ..cap alpha.. particles and protons. The piezoelectric emf increased linearly with the compressive stress and the ..cap alpha..-particle flux intensity. The emf depended weakly on the particle energy. The observed effect was due to the anisotropy resulting from uniaxial deformation.

  10. Piezoelectricity in Single Crystal of Pentaerythritol Tetranitrate

    Directory of Open Access Journals (Sweden)

    K. Raha

    1991-07-01

    Full Text Available The piezoelectric constants perpendicular to (110 and (001 of single crystal f pentaerythritol tetranitrate (PETN are determined to be (3.2+-0.30x10/sup-13/and (1.5+-0.30x10/sub-13/CN/sub-1/. The charge development on these faces under static loading has been confirmed to be true piezoelectric in origin. The crystal seems to experience a quasi permanent deformation under repeated and successive compression with a very long relaxation time. This gives rise to a unique behaviour of individual crystal of PETN under identical stress condition. Mechanical stress relaxation measurements have also been carried out to provide additional evidence on the uniqueness of the crystal. Dielectric constant of the crystal along the directions perpendicular to (110 and (001 are 3.50+-0.12 and 4.57+-0.17; Young's modulus along the directions are (1.24+- 0.30x10/sub6/g cm/sup-2/ respectively. Single crystals of one cm/sub3/ of PETN develops about 10 V cm/sup-1/ field under a force of 1 kg across (110face.

  11. High Polarization Single Mode Photonic Crystal Microlaser

    Institute of Scientific and Technical Information of China (English)

    CHEN Wei; XING Ming-Xin; ZHOU Wen-Jun; LIU An-Jin; ZHENG Wan-Hua

    2009-01-01

    Generally,dipole mode is a doubly degenerate mode.Theoretical calculations have indicated that the single dipole mode of two-dimensional photonic crystal single point defect cavity shows high polarization property.We present a structure with elongated lattice,which only supports a single y-dipole mode.With this structure we can eliminate the degeneracy,control the lasing action of the cavity and demonstrate the high polarization property of the single dipole mode.In our experiment,the polarization extinction ratio of the y-dipole mode is as high as 51:1.

  12. Microhardness studies of sulfamic acid single crystal

    Science.gov (United States)

    Santhosh Kumar, A.; Joseph, Cyriac; Paulose, Reshmi; R, Rajesh; Joseph, Georgekutty; Louis, Godfrey

    2015-02-01

    Vicker's microhardness study of (100), (010) and (001) faces of a non-linear optical crystal sulfamic acid have been reported. Single crystals of sulfamic acid have been grown by slow evaporation method. The load dependence of the Vickers microhardness of sulfamic acid crystal were investigated and analyzed from the stand point of various theoretical models. Crystal samples in a, b and c-axes exhibit reverse indentation effect which is best described by Meyer's law, Hays-Kendall's approach and proportional specimen resistance (PSR) models. The negative values of load dependent quantities in Hays-Kendall's approach and PSR model suggest that the origin of indentation size effect is associated with the process of relaxation of indentation stresses.

  13. Synthesis of monoclinic zinc diphosphide single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Mowles, T.A.

    1978-05-01

    Monoclinic zinc diphosphide is a cheap, plentiful, direct-gap semiconductor with an optimum transition energy for solar absorption. Single crystals were grown from the vapor to be evaluated as a new photovoltaic material. Monoclinic and tetragonal crystal formed within evacuated quartz ampules that were charged with zinc and excess phosphorous and heated in a temperature gradient to give phosphorous pressures from 0.07 to 8.5 atmospheres. The monoclinic form melts incongruently near 990/sup 0/C. The tetragonal form is metastable; its growth is enhanced by impurities but retarded by high phosphorous pressures. The mechanism of the synthesis indicates that a tightly-controlled vapor deposition is possible and that high-quality thin films should form at temperatures from 950 to 990/sup 0/C at pressures below 10 atmospheres. By a modification of the technique, sesquizinc phosphide single crystals were grown for comparison.

  14. Recrystallization of deformed single crystals of iridium

    Energy Technology Data Exchange (ETDEWEB)

    Ermakov, A.V.; Klotsman, S.M.; Pushin, V.G.; Timofeev, A.N.; Kaigorodov, V.N.; Panfilov, P.Y.; Yurchenko, L.I.

    1999-12-31

    The X-ray diffractometric method was used to analyze crystalline textures that appear during rolling of pure single-Ir and annealing of the said crystals in ultrahigh vacuum (UHV) at successively elevating temperatures. Observing alteration of the texture of the deformed pure single-Ir after UHV annealing, the primary recrystallization temperature T{sub 1recr} of pure Ir was found not to exceed 670 K (0.25 T{sub m}).

  15. A test of macromolecular crystallization in microgravity: large well ordered insulin crystals.

    Science.gov (United States)

    Borgstahl, G E; Vahedi-Faridi, A; Lovelace, J; Bellamy, H D; Snell, E H

    2001-08-01

    Crystals of insulin grown in microgravity on Space Shuttle Mission STS-95 were extremely well ordered and unusually large (many >2 mm). The physical characteristics of six microgravity and six earth-grown crystals were examined by X-ray analysis employing superfine phi slicing and unfocused synchrotron radiation. This experimental setup allowed hundreds of reflections to be precisely examined from each crystal in a short period of time. The microgravity crystals were on average 34 times larger, had sevenfold lower mosaicity, had 54-fold higher reflection peak heights and diffracted to significantly higher resolution than their earth-grown counterparts. A single mosaic domain model could account for the observed reflection profiles in microgravity crystals, whereas data from earth crystals required a model with multiple mosaic domains. This statistically significant and unbiased characterization indicates that the microgravity environment was useful for the improvement of crystal growth and the resultant diffraction quality in insulin crystals and may be similarly useful for macromolecular crystals in general.

  16. Ionic conduction of lithium hydride single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Pilipenko, G.I.; Oparin, D.V.; Zhuravlev, N.A.; Gavrilov, F.F.

    1987-09-01

    Using the electrical-conductivity- and NMR-measurement- methods, the ionic-conduction mechanism is established in stoichiometric lithium hydride single crystals. The activation energies of migration of anion- and cation-vacancies and the formation of Schottky-pair defects are determined. They assume that the mechanisms of self-diffusion and conductivity are different in lithium hydride.

  17. Lattice effects in YVO3 single crystal

    NARCIS (Netherlands)

    Marquina, C; Sikora, M; Ibarra, MR; Nugroho, AA; Palstra, TTM

    2005-01-01

    In this paper we report on the lattice effects in the Mott insulator yttrium orthovanadate (YVO3). Linear thermal expansion and magnetostriction experiments have been performed on a single crystal, in the temperature range from 5 K to room temperature. The YVO3 orders antiferromagnetically at T-N =

  18. Antiferromagnetism in chromium alloy single crystals

    DEFF Research Database (Denmark)

    Bjerrum Møller, Hans; Trego, A.L.; Mackintosh, A.R.

    1965-01-01

    The antiferromagnetism of single crystals of dilute alloys of V, Mn and Re in Cr has been studied at 95°K and 300°K by neutron diffraction. The addition of V causes the diffraction peaks to decrease in intensity and move away from (100), while Mn and Re cause them to increase and approach (100) so...

  19. Growth of single-crystal gallium nitride

    Science.gov (United States)

    Clough, R.; Richman, D.; Tietjen, J.

    1970-01-01

    Use of ultrahigh purity ammonia prevents oxygen contamination of GaN during growth, making it possible to grow the GaN at temperatures as high as 825 degrees C, at which point single crystal wafers are deposited on /0001/-oriented sapphire surfaces.

  20. High Field Magnetization of Tb Single Crystals

    DEFF Research Database (Denmark)

    Roeland, L. W.; Cock, G. J.; Lindgård, Per-Anker

    1975-01-01

    The magnetization of Tb single crystals was measured in magnetic fields to 34T along the hard direction at temperature of 1.8, 4.2, 65.5 and 77K, and along with easy direction at 4.2 and 77K. The data are compared with the results of a self-consistent spin wave calculation using a phenomenological...

  1. Corelli: Efficient single crystal diffraction with elastic discrimination

    Indian Academy of Sciences (India)

    Stephan Rosenkranz; Raymond Osborn

    2008-10-01

    Single crystal diffuse scattering provides one of the most powerful probes of short-range correlations on the 1-100 nm scale, which often are responsible for the extreme field response of many emerging phenomena of great interest. Accurate modeling of such complex disorder from diffuse scattering data however puts stringent experimental demands, requiring measurements over large volumes of reciprocal space with sufficient momentum and energy resolution. Here, we discuss the potential of the cross-correlation technique for efficient measurement of single crystal diffuse scattering with energy discrimination, as will be implemented in a novel instrument, Corelli. Utilizing full experiment simulations, we show that this technique readily leads up to a fifty-fold gain in efficiency, as compared to traditional methods, for measuring single crystal diffuse scattering over volumes of reciprocal space with elastic discrimination.

  2. MAGNETORESISTANCE AND HALL EFFECT IN SINGLE CRYSTALS OF ALUMINUM

    Science.gov (United States)

    ALUMINUM, *SINGLE CRYSTALS, CRYSTALS, HALL EFFECT , IMPURITIES, LOW PRESSURE, MAGNETIC FIELDS, MAGNETIC PROPERTIES, PARTICLE TRAJECTORIES, ELECTRICAL RESISTANCE, SOLID STATE PHYSICS, SURFACE PROPERTIES.

  3. Hard photon yields from (70-240) GeV electrons incident near axial directions on Si, Ge and W single crystals with a large thickness variation

    Science.gov (United States)

    Medenwaldt, R.; Møller, S. P.; Tang-Petersen, S.; Uggerhøj, E.; Elsener, K.; Hage-Ali, M.; Siffert, P.; Stoquert, J.; Sona, P.; Maier, K.

    1990-06-01

    The dramatic peak found in photon spectra from 150 GeV channelled electrons has for the first time been investigated for 70, 150, and 240 GeV electrons incident on crystals with thickness from 100μ (Si). Very pronounced variations for the high energy part of the photon spectra are found. In Si the photon peak is not found for lower energies and thin crystals. For well-aligned electrons in Si the yield is more than 160 times the Bethe-Heitler one. In general the peak in the photon spectra disaapears for incident angles larger than half the critical angle for channeling. Dramatic radiative energy losses are found along axial directions - in 0.6 mm Ge a 150 GeV electron loses more than 60% of its total energy.

  4. Hard photon yields from (70-240) GeV electrons incident near axial directions on Si, Ge and W single crystals with a large thickness variation

    Energy Technology Data Exchange (ETDEWEB)

    Medenwaldt, R.; Moeller, S.P.; Tang-Petersen, S.; Uggerhoej, E. (Aarhus Univ. (Denmark). Inst. of Physics); Elsener, K. (European Organization for Nuclear Research, Geneva (Switzerland)); Hage-Ali, M.; Siffert, P.; Stoquert, J. (Strasbourg-1 Univ., 67 (France). Centre de Recherches Nucleaires); Sona, P. (Florence Univ. (Italy). Dipt. di Fisica Istituto Nazionale di Fisica Nucleare, Florence (Italy)); Maier, K. (Max-Planck-Institut fuer Metallforschung, Stuttgart (Germany, F.R.))

    1990-06-14

    The dramatic peak found in photon spectra from 150 GeV channelled electrons has for the first time been investigated for 70, 150, and 240 GeV electrons incident on crystals with thicknesses from 100 {mu}m to 1400 {mu}m (Si). Very pronounced variations for the high energy part of the photon spectra are found. In Si the photon peak is not found for lower energies and thin crystals. For well-aligned electrons in Si the yield is more than 160 times the Bethe-Heitler one. In general the peak in the photon spectra disappears for incident angles larger than half the critical angle for channelling. Dramatic radiative energy losses are found along axial directions - in 0.6 mm <110> Ge a 150 GeV electron loses more than 60% of its total energy. (orig.).

  5. Large Mode Area Photonic Crystal Fibers

    DEFF Research Database (Denmark)

    Nielsen, Martin Dybendal

    2004-01-01

    The photonic crystal fiber (PCF) is a novel single-material optical waveguide realized by an arrangement of air-holes running along the full length of the fiber. Since the proposal of the PCF in 1996, the technology has developed into being a well-established area of research and commercialisation......-mode area fiber optimised for visible light applications. The second is a fiber optimised for the telecommunication band realizing a nonlinear effective area 5 times larger than state of the art conventional fibers. Two examples of alternative designs are demonstrated addressing the core and the cladding...

  6. The growth of ruby single crystals

    Directory of Open Access Journals (Sweden)

    ALEKSANDAR GOLUBOVIC

    2005-02-01

    Full Text Available Ruby (Cr:Al2O3 single crystals were grown by the Czochralski technique in an argon atmosphere. The critical crystal diameter dc = 1.0 cm and the critical rate of rotation wc = 20 rpm were calculated by equations of the hydrodynamics of the melt. The rate of crystal growthwas experimentally obtained to be 2.7 mm/h. For chemical polishing, conc. H3PO4 at 593 K for an exposure of 3 hours was determined. Conc. H3PO4 at 523 K for an exposure of 3 h was found to be a suitable etching solution. The lattice parameters a = 0.47627(6 nm and c = 1.301(1 nm were determined by X-ray powder diffraction. The obtained results are discussed and compared with published data.

  7. Understanding the Cubic Phase Stabilization and Crystallization Kinetics in Mixed Cations and Halides Perovskite Single Crystals.

    Science.gov (United States)

    Xie, Li-Qiang; Chen, Liang; Nan, Zi-Ang; Lin, Hai-Xin; Wang, Tan; Zhan, Dong-Ping; Yan, Jia-Wei; Mao, Bing-Wei; Tian, Zhong-Qun

    2017-03-08

    The spontaneous α-to-δ phase transition of the formamidinium-based (FA) lead halide perovskite hinders its large scale application in solar cells. Though this phase transition can be inhibited by alloying with methylammonium-based (MA) perovskite, the underlying mechanism is largely unexplored. In this Communication, we grow high-quality mixed cations and halides perovskite single crystals (FAPbI3)1-x(MAPbBr3)x to understand the principles for maintaining pure perovskite phase, which is essential to device optimization. We demonstrate that the best composition for a perfect α-phase perovskite without segregation is x = 0.1-0.15, and such a mixed perovskite exhibits carrier lifetime as long as 11.0 μs, which is over 20 times of that of FAPbI3 single crystal. Powder XRD, single crystal XRD and FT-IR results reveal that the incorporation of MA(+) is critical for tuning the effective Goldschmidt tolerance factor toward the ideal value of 1 and lowering the Gibbs free energy via unit cell contraction and cation disorder. Moreover, we find that Br incorporation can effectively control the perovskite crystallization kinetics and reduce defect density to acquire high-quality single crystals with significant inhibition of δ-phase. These findings benefit the understanding of α-phase stabilization behavior, and have led to fabrication of perovskite solar cells with highest efficiency of 19.9% via solvent management.

  8. Biomineralization of nanoscale single crystal hydroxyapatite.

    Science.gov (United States)

    Omokanwaye, Tiffany; Wilson, Otto C; Gugssa, Ayelle; Anderson, Winston

    2015-11-01

    The chemical and physical characteristics of nanocrystalline hydroxyapatite particles which formed during the subcutaneous implantation of crab shell in Sprague-Dawley rats were studied using selected area electron diffraction (SAED) and high resolution transmission electron microscopy (HRTEM). The initial SAED characterization evidence indicated the presence of an amorphous calcium phosphate phase. The electron dense nanophase particles which formed in the wound healing zone displayed broad diffuse rings which usually indicate a low crystalline order or amorphous phase. High resolution transmission electron microscopy (HRTEM) revealed that these mineralized regions contained discrete single crystal particles less than 5nm in size. Micrographs taken at successively higher magnifications revealed very small nanoparticles with a hexagonal arrangement of ion channels with characteristic spacing of 0.54nm and 0.23nm. This study revealed that single crystal hydroxyapatite nanoparticles consisting of only a few unit cells formed via a biomineralization directed process. Copyright © 2015 Elsevier B.V. All rights reserved.

  9. Electroluminescence in BaFCl single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Somaiah, K.; Paracchini, C.

    1987-06-01

    A study of electroluminescence in BaFCl single crystals as a function of temperature is reported. At an excitation voltage of 5 kV, electroluminescent intensity, which is feeble at room temperature, is shown to increase with decreasing temperature. The increase is rapid between 250 K and 175 K and levels off as 80 K is approached. A tentative explanation, in the light of x-ray induced luminescence, is offered. (U.K.).

  10. Secondary particle emission from sapphire single crystal

    Energy Technology Data Exchange (ETDEWEB)

    Minnebaev, K.F., E-mail: minnebaev@mail.ru [Physics Faculty, Moscow State University, Leninskie Gory, Moscow 119991 (Russian Federation); Khvostov, V.V.; Zykova, E.Yu.; Tolpin, K.A. [Physics Faculty, Moscow State University, Leninskie Gory, Moscow 119991 (Russian Federation); Colligon, J.S. [Manchester Metropolitan University, Chester Street, Manchester M1 5GD (United Kingdom); Yurasova, V.E. [Physics Faculty, Moscow State University, Leninskie Gory, Moscow 119991 (Russian Federation)

    2015-07-01

    Secondary ion emission from sapphire single crystal has been studied experimentally and by means of computer simulation. The particular oscillations of secondary ion energy spectra and two specific maxima of O{sup +} and Al{sup +} ions were observed under irradiation of (0001) sapphire face by 1 and 10 keV Ar{sup +} ions. We have explained this by the interplay of the charge exchange processes between moving particles and solids. The existence of two maxima in energy spectra of O{sup +} and Al{sup +} secondary ions can be also connected with special features of single-crystal sputtering: the low-energy peak can be formed by random sputtering and the high-energy peak from focusing collisions. In addition some similarity was found between the positions of low-energy maximum in energy spectra of Al{sup +} ions emitted from sapphire and the principal maxima of Al{sup +} ions ejected from the aluminum single crystal. This indicates a possibility to explain the presence of low-energy maximum in energy spectra of secondary ions ejecting from sapphire by emission of Al{sup +} ions from aluminum islands appearing in a number of cases on the sapphire surface due to preferential sputtering of oxygen. These different mechanisms of creating the energy spectra of ions emitted from sapphire should be taken in account.

  11. Biomineralization of nanoscale single crystal hydroxyapatite

    Energy Technology Data Exchange (ETDEWEB)

    Omokanwaye, Tiffany [Catholic University of America, BONE/CRAB Lab, Department of Biomedical Engineering, Washington, DC 20064 (United States); Wilson, Otto C., E-mail: wilsono@cua.edu [Catholic University of America, BONE/CRAB Lab, Department of Biomedical Engineering, Washington, DC 20064 (United States); Gugssa, Ayelle; Anderson, Winston [Howard University, Department of Biology, Washington, DC (United States)

    2015-11-01

    The chemical and physical characteristics of nanocrystalline hydroxyapatite particles which formed during the subcutaneous implantation of crab shell in Sprague–Dawley rats were studied using selected area electron diffraction (SAED) and high resolution transmission electron microscopy (HRTEM). The initial SAED characterization evidence indicated the presence of an amorphous calcium phosphate phase. The electron dense nanophase particles which formed in the wound healing zone displayed broad diffuse rings which usually indicate a low crystalline order or amorphous phase. High resolution transmission electron microscopy (HRTEM) revealed that these mineralized regions contained discrete single crystal particles less than 5 nm in size. Micrographs taken at successively higher magnifications revealed very small nanoparticles with a hexagonal arrangement of ion channels with characteristic spacing of 0.54 nm and 0.23 nm. This study revealed that single crystal hydroxyapatite nanoparticles consisting of only a few unit cells formed via a biomineralization directed process. - Highlights: • Nanocrystalline particles were formed during in vivo implantation of crab shell using a rat model. • High resolution TEM revealed that nanoparticles were single crystals and less than 5 nm in size. • The relative distance between spots matches the expected values for hydroxyapatite.

  12. A nanoporous two-dimensional polymer by single-crystal-to-single-crystal photopolymerization.

    Science.gov (United States)

    Kissel, Patrick; Murray, Daniel J; Wulftange, William J; Catalano, Vincent J; King, Benjamin T

    2014-09-01

    In contrast to the wide number and variety of available synthetic routes to conventional linear polymers, the synthesis of two-dimensional polymers and unambiguous proof of their structure remains a challenge. Two-dimensional polymers-single-layered polymers that form a tiling network in exactly two dimensions-have potential for use in nanoporous membranes and other applications. Here, we report the preparation of a fluorinated hydrocarbon two-dimensional polymer that can be exfoliated into single sheets, and its characterization by high-resolution single-crystal X-ray diffraction analysis. The procedure involves three steps: preorganization in a lamellar crystal of a rigid monomer bearing three photoreactive arms, photopolymerization of the crystalline monomers by [4 + 4] cycloaddition, and isolation of individual two-dimensional polymer sheets. This polymer is a molecularly thin (~1 nm) material that combines precisely defined monodisperse pores of ~9 Å with a high pore density of 3.3 × 10(13) pores cm(-2). Atomic-resolution single-crystal X-ray structures of the monomer, an intermediate dimer and the final crystalline two-dimensional polymer were obtained and prove the single-crystal-to-single-crystal nature and molecular precision of the two-dimensional photopolymerization.

  13. Method for the preparation of inorganic single crystal and polycrystalline electronic materials

    Science.gov (United States)

    Groves, W. O. (Inventor)

    1969-01-01

    Large area, semiconductor crystals selected from group 3-5 compounds and alloys are provided for semiconductor device fabrication by the use of a selective etching operation which completely removes the substrate on which the desired crystal was deposited. The substrate, selected from the same group as the single crystal, has a higher solution rate than the epitaxial single crystal which is essentially unaffected by the etching solution. The preparation of gallium phosphide single crystals using a gallium arsenide substrate and a concentrated nitric acid etching solution is described.

  14. Electrical conductivity of sulfamic acid single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Varughese, G. [Department of Physics, Catholicate College, Pathanamthitta, Kerala (India); Iype, L. [School of Pure and Applied Physics, Mahatma Gandhi Unniversity, Kottayam, Kerala (India); Rajesh, R. [Department of Physics, N S S College, Manjeri, Malappuram, Kerala (India); Joseph, G. [Department of Physics, Sacred Heart College, Thevara, Cochin, Kerala (India); Louis, G. [Department of Physics, Cochin University of Science and Technology, Cochin, Kerala (India); Santhosh Kumar, A.

    2010-08-15

    Single crystals of sulfamic acid have been grown by the method of slow evaporation at constant temperature. DC electrical conductivity was measured in the temperature range 300 - 440 K along a, b and c-axes. Conductivity measurements show slope change near 330 K and 410 K. The slope change observed around 330 K may be attributed as due to a phase transition which has been well supported by the DSC and DTA measurements. Slope change observed around 410 K is attributed as the onset of the thermal decomcoposition as evidenced by TGA curve. TGA studies show the crystal is very stable up to 440 K. Activation energies for the conduction process are calculated for all measured crystallographic directions. (copyright 2010 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  15. Single crystal neutron diffraction study of triglycine sulphate revisited

    Indian Academy of Sciences (India)

    Rajul Ranjan Choudhury; R Chitra

    2008-11-01

    In order to get the exact hydrogen-bonding scheme in triglycine sulphate (TGS), which is an important hydrogen bonded ferroelectric, a single crystal neutron diffraction study was undertaken. The structure was refined to an -factor of [2] = 0.034. Earlier neutron structure of TGS was reported with a very limited data set and large standard deviations. The differences between the present and the earlier reported neutron structure of TGS are discussed.

  16. Floating Zone Growth and Thermionic Emission Property of Single Crystal CeB6

    Institute of Scientific and Technical Information of China (English)

    BAO Li-Hong; ZHANG Jiu-Xing; ZHOU Shen-Lin; ZHANG Ning; XU Hong

    2011-01-01

    @@ Large-sized and high-quality cerium hexaboride(CeB6) single crystals are successfully grown yb the optical floating zone method.The structure, chemical composition and thermionic emission properties of the crystal are characterized by x-ray diffraction, x-ray fluorescence and emission measurements, respectively.Based on the observation of single crystal diffraction, the relative density of feed rods has a great effect on the quality of the grown crystal.The thermionic emission measurement results show that the emission current density of the single crystal is 47.1 A/cm2 at 1873K with an applied voltage of 1 kV,which is about two times larger than the value for polycrystalline samples.The single crystal possesses excellent emission current stability.Therefore, it is expected that CeBs single crystal is a very promising material for thermionic cathode applications.

  17. Direct shear of olivine single crystals

    Science.gov (United States)

    Tielke, Jacob A.; Zimmerman, Mark E.; Kohlstedt, David L.

    2016-12-01

    Knowledge of the strengths of the individual dislocation slip systems in olivine is fundamental to understanding the flow behavior and the development of lattice-preferred orientation in olivine-rich rocks. The most direct measurements of the strengths of individual slip systems are from triaxial compression experiments on olivine single crystals. However, such experiments only allow for determination of flow laws for two of the four dominant slip systems in olivine. In order to measure the strengths of the (001)[100] and (100)[001] slip systems independently, we performed deformation experiments on single crystals of San Carlos olivine in a direct shear geometry. Experiments were carried out at temperatures of 1000 ° to 1300 °C, a confining pressure of 300 MPa, shear stresses of 60 to 334 MPa, and resultant shear strain rates of 7.4 × 10-6 to 2.1 × 10-3 s-1. At high-temperature (≥1200 °C) and low-stress (≤200 MPa) conditions, the strain rate of crystals oriented for direct shear on either the (001)[100] or the (100)[001] slip system follows a power law relationship with stress, whereas at lower temperatures and higher stresses, strain rate depends exponentially on stress. The flow laws derived from the mechanical data in this study are consistent with a transition from the operation of a climb-controlled dislocation mechanism during power-law creep to the operation of a glide-controlled dislocation mechanism during exponential creep. In the climb-controlled regime, crystals oriented for shear on the (001)[100] slip system are weaker than crystals orientated for shear on the (100)[001] slip system. In contrast, in the glide-controlled regime the opposite is observed. Extrapolation of flow laws determined for crystals sheared in orientations favorable for slip on these two slip systems to upper mantle conditions reveals that the (001)[100] slip system is weaker at temperatures and stresses that are typical of the asthenospheric mantle, whereas the (100

  18. Single Crystals of Organolead Halide Perovskites: Growth, Characterization, and Applications

    KAUST Repository

    Peng, Wei

    2017-04-01

    With the soaring advancement of organolead halide perovskite solar cells rising from a power conversion efficiency of merely 3% to more than 22% shortly in five years, researchers’ interests on this big material family have been greatly spurred. So far, both in-depth studies on the fundamental properties of organolead halide perovskites and their extended applications such as photodetectors, light emitting diodes, and lasing have been intensively reported. The great successes have been ascribed to various superior properties of organolead halide hybrid perovskites such as long carrier lifetimes, high carrier mobility, and solution-processable high quality thin films, as will be discussed in Chapter 1. Notably, most of these studies have been limited to their polycrystalline thin films. Single crystals, as a counter form of polycrystals, have no grain boundaries and higher crystallinity, and thus less defects. These characteristics gift single crystals with superior optical, electrical, and mechanical properties, which will be discussed in Chapter 2. For example, organolead halide perovskite single crystals have been reported with much longer carrier lifetimes and higher carrier mobilities, which are especially intriguing for optoelectronic applications. Besides their superior optoelectronic properties, organolead halide perovskites have shown large composition versatility, especially their organic components, which can be controlled to effectively adjust their crystal structures and further fundamental properties. Single crystals are an ideal platform for such composition-structure-property study since a uniform structure with homogeneous compositions and without distraction from grain boundaries as well as excess defects can provide unambiguously information of material properties. As a major part of work of this dissertation, explorative work on the composition-structure-property study of organic-cation-alloyed organolead halide perovskites using their single

  19. Extremely large electronic anisotropy caused by electronic phase separation in Ca3(Ru0.97Ti0.03)2O7 single crystal

    Science.gov (United States)

    Peng, Jing; Wu, Xiaoshan; Mao, Zhiqiang

    2015-03-01

    Bilayered ruthenate Ca3 Ru2O7 exhibits rich electronic and magnetic properties. It orders at 56K, with FM bilayers antiferromagnetically coupled along c-axis (AFM-a). The AFM transition is closely followed by a first-order metal-insulator (MI) transition at 48K where spin directions switch to the b-axis (AFM-b). While this MI transition is accompanied by the opening of anisotropic charge gap; small Fermi pockets survive from the MI transition, thus resulting in quasi-2D metallic transport behavior for Tinsulating state with a nearest-neighbor AFM order via Ti doping. Ca3(Ru0 . 97 Ti0 . 03) 2O7 is close to the critical composition for the AFM-b-to-G-AFM phase transition. Our recent studies show the sample with this composition is characterized by an electronic phase separation between the insulating G-AFM phase (major) and the localized AFM-b phase (minor). The minor AFM-b phase forms a conducting path through electronic percolation within the ab-plane, but not along the c-axis, thus resulting in extremely large electronic anisotropy with ρab /ρc ~109 , which may be the largest among bulk materials.

  20. Fabrication of crystals from single metal atoms.

    Science.gov (United States)

    Barry, Nicolas P E; Pitto-Barry, Anaïs; Sanchez, Ana M; Dove, Andrew P; Procter, Richard J; Soldevila-Barreda, Joan J; Kirby, Nigel; Hands-Portman, Ian; Smith, Corinne J; O'Reilly, Rachel K; Beanland, Richard; Sadler, Peter J

    2014-05-27

    Metal nanocrystals offer new concepts for the design of nanodevices with a range of potential applications. Currently the formation of metal nanocrystals cannot be controlled at the level of individual atoms. Here we describe a new general method for the fabrication of multi-heteroatom-doped graphitic matrices decorated with very small, ångström-sized, three-dimensional (3D)-metal crystals of defined size. We irradiate boron-rich precious-metal-encapsulated self-spreading polymer micelles with electrons and produce, in real time, a doped graphitic support on which individual osmium atoms hop and migrate to form 3D-nanocrystals, as small as 15 Å in diameter, within 1 h. Crystal growth can be observed, quantified and controlled in real time. We also synthesize the first examples of mixed ruthenium-osmium 3D-nanocrystals. This technology not only allows the production of ångström-sized homo- and hetero-crystals, but also provides new experimental insight into the dynamics of nanocrystals and pathways for their assembly from single atoms.

  1. Sensitive X-ray detectors made of methylammonium lead tribromide perovskite single crystals

    NARCIS (Netherlands)

    Wei, Haotong; Fang, Yanjun; Mulligan, Padhraic; Chuirazzi, William; Fang, Hong-Hua; Wang, Congcong; Ecker, Benjamin R.; Gao, Yongli; Loi, Maria Antonietta; Cao, Lei; Huang, Jinsong

    2016-01-01

    The large mobilities and carrier lifetimes of hybrid perovskite single crystals and the high atomic numbers of Pb, I and Br make them ideal for X-ray and gamma-ray detection. Here, we report a sensitive X-ray detector made of methylammonium lead bromide perovskite single crystals. A record-high mobi

  2. Sensitive X-ray detectors made of methylammonium lead tribromide perovskite single crystals

    NARCIS (Netherlands)

    Wei, Haotong; Fang, Yanjun; Mulligan, Padhraic; Chuirazzi, William; Fang, Hong-Hua; Wang, Congcong; Ecker, Benjamin R.; Gao, Yongli; Loi, Maria Antonietta; Cao, Lei; Huang, Jinsong

    2016-01-01

    The large mobilities and carrier lifetimes of hybrid perovskite single crystals and the high atomic numbers of Pb, I and Br make them ideal for X-ray and gamma-ray detection. Here, we report a sensitive X-ray detector made of methylammonium lead bromide perovskite single crystals. A record-high mobi

  3. Growth and characterization of propyl-para-hydroxybenzoate single crystals

    Indian Academy of Sciences (India)

    N Karunagaran; P Ramasamy; R Perumal Ramasamy

    2014-10-01

    Single crystals of propyl--hydroxybenzoate have been grown by slow evaporation solution technique. The structure of the compound was confirmed by FT–IR, FT–Raman spectroscopy and single crystal X-ray diffraction studies. The crystalline perfection of the grown single crystals has been analysed by high resolution X-ray diffraction measurements. Optical properties of the grown single crystals were studied by UV–Vis NIR spectrum. The luminescence behaviour of the single crystal has been analysed by photoluminescence analysis and found maximum luminescence in the lower wavelength region. A simple interferometric technique was used for measuring birefringence of the crystal. The laser damage threshold of the crystal is 1.3 GW/cm2. The mechanical strength of the grown crystal is measured using Vickers microhardness tester. The dielectric properties have been investigated.

  4. The new single crystal diffractometer SC3

    Energy Technology Data Exchange (ETDEWEB)

    Schefer, J.; Koch, M.; Keller, P.; Fischer, S.; Thut, R. [Lab. for Neutron Scattering ETH Zurich, Zurich (Switzerland) and Paul Scherrer Institute, Villigen (Switzerland)

    1996-11-01

    Single crystal diffraction is a powerful method for the determination of precise structure parameters, superlattices, stress. Neutron single crystal diffraction gives additionally to X-rays information on magnetic structures, both commensurate and incommensurate, hydrogen positions, hydrogen bonding behavior and accurate bondlengths, e.g. important in cuprates. The method is therefore especially powerful if combined with X-ray diffraction results. The new instrument at SINQ has been designed for inorganic materials and is positioned at a thermal beam tube, pointing on a water scatterer. This scatterer is presently operating with H{sub 2}O at ambient temperature, but a change to another medium at different temperature is possible. The instrument will be equipped with three area detectors, moving at fixed difference in 2{Theta}. each detector may be individually moved around a vertical circle (tilting angle {gamma}), allowing to use not only 4-circle geometry in the temperature range from 1.5 to 380 K, but also any equipment from a dilution refrigerator (7 mK) to a heavy magnet. A high temperature furnace for 4-circle geometry is foreseen as a future option. (author) 6 figs., 1 tab., 7 refs.

  5. Large, dispersive photoelectron Fermi edge and the electronic structure of YBa/sub 2/Cu/sub 3/O/sub 6. 9/ single crystals measured at 20 K

    Energy Technology Data Exchange (ETDEWEB)

    Arko, A. J.; List, R. S.; Bartlett, R. J.; Cheong, S.; Fisk, Z.; Thompson, J. D.; Olson, C. G.; Yang, A.; Liu, R.; Gu, C.; and others

    1989-08-01

    We have performed angle-integrated photoemission measurements at 20 K on well-oxygenated (/ital T//sub /ital c//=92 K) single crystals of YBa/sub 2/Cu/sub 3/O/sub 6.9/ cleaved /ital n/ /ital situ/, and find a relatively large, resolution-limited Fermi edge which shows large amplitude variations with photon energy, indicative of band-structure final-state effects. Some dispersion is seen even in our angle-integrated measurements. Our best estimate of /ital N/(/ital E//sub /ital F//) per Cu atom is that it is about 20% that of Cu metal with about a 20-80 mix of Cu 3/ital d/ and O 2/ital p/ orbitals. Dispersive and final-state effects are seen throughout the valence bands. The line shapes of the spectra as a function of photon energy are very well reproduced by band-structure predictions, indicating a correct mix of 2/ital p/ and 3/ital d/ orbitals in the calculations, while the energy positions of the peak agree with calculated bands to within /approx/0.5 eV. We conclude that a Fermi-liquid approach to conductivity is appropriate.

  6. Oriented hydroxyapatite single crystals produced by the electrodeposition method

    Energy Technology Data Exchange (ETDEWEB)

    Santos, E.A. dos, E-mail: euler@ufs.br [INSA - Groupe Ingenierie des Surfaces, 24, Bld de la Victoire, 67084 Strasbourg (France); IPCMS - Departement de Surfaces et Interfaces, 23, rue du Loess, BP 43, 67034 Strasbourg (France); Moldovan, M.S. [INSA - Groupe Ingenierie des Surfaces, 24, Bld de la Victoire, 67084 Strasbourg (France); IPCMS - Departement de Surfaces et Interfaces, 23, rue du Loess, BP 43, 67034 Strasbourg (France); Jacomine, L. [INSA - Groupe Ingenierie des Surfaces, 24, Bld de la Victoire, 67084 Strasbourg (France); Mateescu, M. [IS2M - Equipe Interaction Surface-Matiere Vivant, 15, rue Jean Starcky, BP 2488, 68057 Mulhouse (France); Werckmann, J. [IPCMS - Departement de Surfaces et Interfaces, 23, rue du Loess, BP 43, 67034 Strasbourg (France); Anselme, K. [IS2M - Equipe Interaction Surface-Matiere Vivant, 15, rue Jean Starcky, BP 2488, 68057 Mulhouse (France); Mille, P.; Pelletier, H. [INSA - Groupe Ingenierie des Surfaces, 24, Bld de la Victoire, 67084 Strasbourg (France)

    2010-05-25

    We propose here the use of cathodic electrodeposition as tool to fabricate implant coatings consisting in nano/micro single crystals of hydroxyapatite (HA), preferentially orientated along the c-axis. Coating characterization is the base of this work, where we discuss the mechanisms related to the deposition of oriented hydroxyapatite thin films. It is shown that when deposited on titanium alloys, the HA coating is constituted by two distinct regions with different morphologies: at a distance of few microns from the substrate, large HA single crystals are oriented along the c-axis and appear to grow up from a base material, consisting in an amorphous HA. This organized system has a great importance for cell investigation once the variables involved in the cell/surface interaction are reduced. The use of such systems could give a new insight on the effect of particular HA orientation on the osteoblast cells.

  7. Growth of single crystals of BaFe12O19 by solid state crystal growth

    Science.gov (United States)

    Fisher, John G.; Sun, Hengyang; Kook, Young-Geun; Kim, Joon-Seong; Le, Phan Gia

    2016-10-01

    Single crystals of BaFe12O19 are grown for the first time by solid state crystal growth. Seed crystals of BaFe12O19 are buried in BaFe12O19+1 wt% BaCO3 powder, which are then pressed into pellets containing the seed crystals. During sintering, single crystals of BaFe12O19 up to ∼130 μm thick in the c-axis direction grow on the seed crystals by consuming grains from the surrounding polycrystalline matrix. Scanning electron microscopy-energy dispersive spectroscopy analysis shows that the single crystal and the surrounding polycrystalline matrix have the same chemical composition. Micro-Raman scattering shows the single crystal to have the BaFe12O19 structure. The optimum growth temperature is found to be 1200 °C. The single crystal growth behavior is explained using the mixed control theory of grain growth.

  8. Load Relaxation of Olivine Single Crystals

    Science.gov (United States)

    Cooper, R. F.; Stone, D. S.; Plookphol, T.

    2016-12-01

    Single crystals of ferromagnesian olivine (San Carlos, AZ, peridot; Fo90-92) have been deformed in both uniaxial creep and load relaxation under conditions of ambient pressure, T = 1500ºC and pO2 = 10-10 atm; creep stresses were in the range 40 ≤ σ1 (MPa) ≤ 220. The crystals were oriented such that the applied stress was parallel to [011]c, which promotes single slip on the slowest slip system in olivine, (010)[001]. The creep rates at steady state match well the results of earlier investigators, as does the stress sensitivity (a power-law exponent of n = 3.6). Dislocation microstructures, including spatial distribution of low-angle (subgrain) boundaries, additionally confirm previous investigations. Inverted primary creep (an accelerating strain rate with an increase in stress) was observed. Load-relaxation, however, produced a singular response—a single hardness curve—regardless of the magnitude of creep stress or total accumulated strain preceding relaxation. The log-stress v. log-strain rate data from load-relaxation and creep experiments overlap to within experimental error. The load-relaxation behavior is distinctly different that that described for other crystalline solids, where the flow stress is affected strongly by work hardening such that a family of distinct hardness curves is generated, which are related by a scaling function. The response of olivine for the conditions studied, thus, indicates flow that is rate-limited by dislocation glide, reflecting specifically a high intrinsic lattice resistance (Peierls stress).

  9. Converting ceria polyhedral nanoparticles into single-crystal nanospheres.

    Science.gov (United States)

    Feng, Xiangdong; Sayle, Dean C; Wang, Zhong Lin; Paras, M Sharon; Santora, Brian; Sutorik, Anthony C; Sayle, Thi X T; Yang, Yi; Ding, Yong; Wang, Xudong; Her, Yie-Shein

    2006-06-09

    Ceria nanoparticles are one of the key abrasive materials for chemical-mechanical planarization of advanced integrated circuits. However, ceria nanoparticles synthesized by existing techniques are irregularly faceted, and they scratch the silicon wafers and increase defect concentrations. We developed an approach for large-scale synthesis of single-crystal ceria nanospheres that can reduce the polishing defects by 80% and increase the silica removal rate by 50%, facilitating precise and reliable mass-manufacturing of chips for nanoelectronics. We doped the ceria system with titanium, using flame temperatures that facilitate crystallization of the ceria yet retain the titania in a molten state. In conjunction with molecular dynamics simulation, we show that under these conditions, the inner ceria core evolves in a single-crystal spherical shape without faceting, because throughout the crystallization it is completely encapsulated by a molten 1- to 2-nanometer shell of titania that, in liquid state, minimizes the surface energy. The principle demonstrated here could be applied to other oxide systems.

  10. Vibration-assisted machining of single crystal

    Science.gov (United States)

    Zahedi, S. A.; Roy, A.; Silberschmidt, V. V.

    2013-07-01

    Vibration-assisted machining offers a solution to expanding needs for improved machining, especially where accuracy and precision are of importance, such as in micromachining of single crystals of metals and alloys. Crystallographic anisotropy plays a crucial role in determining on overall response to machining. In this study, we intend to address the matter of ultra-precision machining of material at the micron scale using computational modelling. A hybrid modelling approach is implemented that combines two discrete schemes: smoothed particle hydrodynamics and continuum finite elements. The model is implemented in a commercial software ABAQUS/Explicit employing a user-defined subroutine (VUMAT) and used to elucidate the effect of crystallographic anisotropy on a response of face centred cubic (f.c.c.) metals to machining.

  11. Method of Making Lightweight, Single Crystal Mirror

    Science.gov (United States)

    Bly, Vincent T. (Inventor)

    2015-01-01

    A method of making a mirror from a single crystal blank may include fine grinding top and bottom surfaces of the blank to be parallel. The blank may then be heat treated to near its melting temperature. An optical surface may be created on an optical side of the blank. A protector may be bonded to the optical surface. With the protector in place, the blank may be light weighted by grinding a non-optical surface of the blank using computer controlled grinding. The light weighting may include creating a structure having a substantially minimum mass necessary to maintain distortion of the mirror within a preset limit. A damaged layer of the non-optical surface caused by light weighting may be removed with an isotropic etch and/or repaired by heat treatment. If an oxide layer is present, the entire blank may then be etched using, for example, hydrofluoric acid. A reflecting coating may be deposited on the optical surface.

  12. Piezoresistance measurement on single crystal silicon nanowires

    Science.gov (United States)

    Toriyama, Toshiyuki; Funai, Daisuke; Sugiyama, Susumu

    2003-01-01

    A p-type single crystal silicon nanowire bridge and a four-terminal nanowire element were fabricated by electron-beam direct writing. The piezoresistance was investigated in order to demonstrate the usefulness of these sensing elements as mechanical sensors. The longitudinal piezoresistance coefficient πl[110] was found to be 38.7×10-11 Pa-1 at a surface impurity concentration of Ns=9×1019cm-3 for the nanowire bridge. The shear piezoresistance coefficient π44 was found to be 77.4×10-11 Pa-1 at Ns=9×1019 cm-3 for the four-terminal nanowire element. These values are 54.8% larger than the values obtained from p+ diffused piezoresistors, which are used in conventional mechanical sensors.

  13. Piezoelectric single crystals for ultrasonic transducers in biomedical applications

    Science.gov (United States)

    Zhou, Qifa; Lam, Kwok Ho; Zheng, Hairong; Qiu, Weibao; Shung, K. Kirk

    2014-01-01

    Piezoelectric single crystals, which have excellent piezoelectric properties, have extensively been employed for various sensors and actuators applications. In this paper, the state–of–art in piezoelectric single crystals for ultrasonic transducer applications is reviewed. Firstly, the basic principles and design considerations of piezoelectric ultrasonic transducers will be addressed. Then, the popular piezoelectric single crystals used for ultrasonic transducer applications, including LiNbO3 (LN), PMN–PT and PIN–PMN–PT, will be introduced. After describing the preparation and performance of the single crystals, the recent development of both the single–element and array transducers fabricated using the single crystals will be presented. Finally, various biomedical applications including eye imaging, intravascular imaging, blood flow measurement, photoacoustic imaging, and microbeam applications of the single crystal transducers will be discussed. PMID:25386032

  14. Functionalizing single crystals: incorporation of nanoparticles inside gel-grown calcite crystals.

    Science.gov (United States)

    Liu, Yujing; Yuan, Wentao; Shi, Ye; Chen, Xiaoqiang; Wang, Yong; Chen, Hongzheng; Li, Hanying

    2014-04-14

    Synthetic single crystals are usually homogeneous solids. Biogenic single crystals, however, can incorporate biomacromolecules and become inhomogeneous solids so that their properties are also extrinsically regulated by the incorporated materials. The discrepancy between the properties of synthetic and biogenic single crystals leads to the idea to modify the internal structure of synthetic crystals to achieve nonintrinsic properties by incorporation of foreign material. Intrinsically colorless and diamagnetic calcite single crystals are turned into colored and paramagnetic solids, through incorporation of Au and Fe3O4 nanoparticles without significantly disrupting the crystalline lattice of calcite. The crystals incorporate the nanoparticles and gel fibers when grown in agarose gel media containing the nanoparticles, whereas the solution-grown crystals do not. As such, our work extends the long-history gel method for crystallization into a platform to functionalize single-crystalline materials.

  15. Piezoelectric single crystals for ultrasonic transducers in biomedical applications

    OpenAIRE

    Zhou, Qifa; Lam, Kwok Ho; Zheng, Hairong; Qiu, Weibao; Shung, K. Kirk

    2014-01-01

    Piezoelectric single crystals, which have excellent piezoelectric properties, have extensively been employed for various sensors and actuators applications. In this paper, the state–of–art in piezoelectric single crystals for ultrasonic transducer applications is reviewed. Firstly, the basic principles and design considerations of piezoelectric ultrasonic transducers will be addressed. Then, the popular piezoelectric single crystals used for ultrasonic transducer applications, including LiNbO...

  16. Ultraviolet Photoelectric Effect in ZrO2 Single Crystals

    Institute of Scientific and Technical Information of China (English)

    XING Jie; WANG Xu; ZHAO Kun; LI Jie; JIN Kui-Juan; HE Meng; ZHENG Dong-Ning; L(U) Hui-Bin

    2007-01-01

    Nanosecond photoelectric effect is observed in a ZrO2 single crystal at ambient temperature for the first time.The rise time is 20ns and the full width at half maximum is about 30ns for the photovoltaic pulse when the wafer surface of the ZrO2 single crystal is irradiated by 248nm KrF laser pulses. The experimental results show that ZrO2 single crystals may be a potential candidate in UV photodetectors.

  17. Volume reflection of ultrarelativistic particles in single crystals

    Directory of Open Access Journals (Sweden)

    V. A. Maisheev

    2007-08-01

    Full Text Available An analytical description of volume reflection of charged ultrarelativistic particles in bent single crystals is considered. The relation describing the angle of volume reflection as a function of the transversal energy is obtained. Different angle distributions of the scattered protons in single crystals are found. Results of calculations for 400 GeV protons scattered by the silicon single crystal are presented.

  18. Advanced Electroactive Single Crystal and Polymer Actuators for Passive Optics Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Large stroke and high precision electroactive single crystal and polymer actuators are desired for cryogenic passive optics such as Fabry-Perot Interferometer (FPI)...

  19. Crystal Growth and Characterization of Ca3NbGa3Si2O14 Single Crystal

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Single crystals of Ca3NbGa3Si2O14 (CNGS) with ordered Ca3Ga2Ge4O14 (CGG) structure were successfully grown from stoichiometric melts by conventional Czochralski technique along the a-axis and two large (001) facets and two small (100) facets appear in every crystal. An arrangement of parallel steps and a clear height change were observed in (001) facet by atomic force microscopy (AFM). High-resolution X-ray diffraction (HRXRD) results indicate that CNGS crystals have good quality and free low-angle boundaries. The crystals also exhibit good optical quality and high optical transmittance in c-direction.

  20. Composite single crystal silicon scan mirror substrates Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Single crystal silicon is a desirable mirror substrate for scan mirrors in space telescopes. As diameters of mirrors become larger, existing manufacturing...

  1. Cryogenic Fluid Transfer Components Using Single Crystal Piezoelectric Actuators Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Cryogenic fluid transfer components using single crystal piezoelectric actuators are proposed to enable low thermal mass, minimal heat leak, low power consumption...

  2. Cryogenic Fluid Transfer Components Using Single Crystal Piezoelectric Actuators Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Cryogenic fluid transfer components using single crystal piezoelectric actuators are proposed to enable low thermal mass, minimal heat leak, low power consumption...

  3. Ultratough CVD single crystal diamond and three dimensional growth thereof

    Science.gov (United States)

    Hemley, Russell J [Washington, DC; Mao, Ho-kwang [Washington, DC; Yan, Chih-shiue [Washington, DC

    2009-09-29

    The invention relates to a single-crystal diamond grown by microwave plasma chemical vapor deposition that has a toughness of at least about 30 MPa m.sup.1/2. The invention also relates to a method of producing a single-crystal diamond with a toughness of at least about 30 MPa m.sup.1/2. The invention further relates to a process for producing a single crystal CVD diamond in three dimensions on a single crystal diamond substrate.

  4. Large philipsite crystal as ferromanganese nodule nucleus

    Digital Repository Service at National Institute of Oceanography (India)

    Ghosh, A.K.; Mukhopadhyay, R.

    We report here the occurrence of, to date, the largest (21 x 10 x 8 mm) phillipsite crystal forming the nucleus of a diagenetically formed ferromanganese nodule from the Central Indian Ocean Basin (CIOB). Assuming an average rate of ferromanganese...

  5. Employing a cylindrical single crystal in gas-surface dynamics

    NARCIS (Netherlands)

    Hahn, C.; Shan, J.; Liu, Y.; Berg, van den O.; Kleijn, A.W.; Juurlink, L.B.F.

    2012-01-01

    We describe the use of a polished, hollow cylindrical nickel single crystal to study effects of step edges on adsorption and desorption of gas phase molecules. The crystal is held in an ultra-high vacuum apparatus by a crystal holder that provides axial rotation about a [100] direction, and a crysta

  6. Hot Corrosion of Coated Single Crystal Superalloys

    Energy Technology Data Exchange (ETDEWEB)

    Simms, N. J.; Encinas-Oropesa, A.; Nicholls, J.R. [Cranfield University, Power Generation Technology Centre, Cranfield, Beds, MK43 0AL (United Kingdom)

    2004-07-01

    Gas turbines are at the heart of many modern power systems, with combined cycle power generation utilising natural gas being an effective way of reducing environmental emissions compared to conventional pulverized coal fired plants. The development of gas turbine technology has been focused on increasing its efficiency. However, the lives of the hot gas path components within these gas turbines are also critical to the viability of the power systems. Single crystal superalloys have been developed for use with clean fuel/air but are now being used in industrial gas turbines that may need to run with dirtier fuel/air. Indeed, gas turbine based power systems are being evaluated in which solid fuels (e.g. coal and/or biomass) are gasified to produce fuel gases, which introduces the potential for significant corrosive and erosive damage to gas turbine blades and vanes. The performance of these materials, with coatings, has to be determined before they can be used with confidence in dirtier fuel environments. This paper reports results from a series of laboratory tests carried out using the 'deposit replenishment' technique to investigate the sensitivity of candidate materials to exposure conditions anticipated in such gas turbines. The materials investigated have included CMSX-4 and SC{sup 2}-B (both bare and with Pt-Al and Amdry 997 coatings) as well as conventional nickel based superalloys such as IN738LC for comparison. The exposure conditions within the laboratory tests have covered ranges of SO{sub x} (50 and 500 vpm) and HCl (0 and 500 vpm) in air, as well as 4/1 (Na/K){sub 2}SO{sub 4} deposits, with deposition fluxes of 1.5, 5 and 15 {mu}g/cm{sup 2}/h, for periods of up to 500 hours at 700 and 900 deg. C. Data on the performance of materials has been obtained using dimensional metrology: pre-exposure contact measurements and post-exposure measurements of features on polished cross-sections. These measurement methods allow distributions of damage data to

  7. Rolling-contact deformation of MgO single crystals

    Science.gov (United States)

    Dufrane, K. F.; Glaeser, W. A.

    1976-01-01

    Magnesium oxide single crystals were used as a model bearing material and deformed by rolling contact with a steel ball 0.64 cm in diameter. A dependence of depth of slip on rolling velocity which persisted with increasing numbers of rolling-contact cycles was discovered. The track width, track hardness and dislocation interactions as observed by transmission electron microscopy all increased in a consistent manner with increasing cycles. The rolling-contact state of stress produces a high density of dislocations in a localized zone. Dislocation interaction in this zone produces cleavage-type cracks after a large number of rolling-contact cycles. The orientation of the crystal influences the character of dislocation accumulation.

  8. Single Molecule Studies on Dynamics in Liquid Crystals

    Directory of Open Access Journals (Sweden)

    Daniela Täuber

    2013-09-01

    Full Text Available Single molecule (SM methods are able to resolve structure related dynamics of guest molecules in liquid crystals (LC. Highly diluted small dye molecules on the one hand explore structure formation and LC dynamics, on the other hand they report about a distortion caused by the guest molecules. The anisotropic structure of LC materials is used to retrieve specific conformation related properties of larger guest molecules like conjugated polymers. This in particular sheds light on organization mechanisms within biological cells, where large molecules are found in nematic LC surroundings. This review gives a short overview related to the application of highly sensitive SM detection schemes in LC.

  9. Mesoporous zeolite and zeotype single crystals synthesized in fluoride media

    DEFF Research Database (Denmark)

    Egeblad, Kresten; Kustova, Marina; Klitgaard, Søren Kegnæs

    2007-01-01

    We report the synthesis and characterization of a series of new mesoporous zeolite and zeotype materials made available by combining new and improved procedures for directly introducing carbon into reaction mixtures with the fluoride route for conventional zeolite synthesis. The mesoporous...... characterized by XRPD, SEM, TEM and N-2 physisorption measurements. For the zeolite materials it A as found that mesoporous MFI and MEL structured single crystals could indeed be crystallized from fluoride media using an improved carbon-templating approach. More importantly, it was found that mesoporous BEA......-type single crystals could be crystallized from fluoride media by a newly developed procedure presented here. Thus, we here present the only known route to mesoporous BEA-type single crystals, since crystallization of this framework structure from basic media is known to give only nanosized crystals...

  10. Optical characterization of ferroelectric glycinium phosphite single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Perumal, R.; Senthil Kumar, K. [Crystal Growth Centre, Anna University, Sardar Patel Road, Chennai, Tamil Nadu 600025 (India); Moorthy Babu, S., E-mail: babu@annauniv.ed [Crystal Growth Centre, Anna University, Sardar Patel Road, Chennai, Tamil Nadu 600025 (India); Bhagavannarayana, G. [Crystal Growth and Crystallography Section, National Physical Laboratory, CSIR, Dr. K.S. Krishnan Marg, New Delhi 110012 (India)

    2010-02-04

    Single crystals of glycinium phosphite (GPI) were grown by isothermal evaporation and conventional temperature-lowering techniques. Single crystal and powder X-ray diffraction analysis confirm the monoclinic structure of the as grown crystals. The structural perfection of the as grown crystal was determined through HRXRD analysis. FTIR and Raman analysis revealed the functional groups present in the grown crystals. The optical absorption of the grown crystal was analyzed and the refractive index values for different wavelengths were measured by prism coupling technique. Thermal stability, melting temperature and phase transition temperature of the as grown crystals were identified from TGA/DSC analysis. The dielectric impedance analysis indicates the continuous phase transition nature of the grown crystals. The mechanical strength and hardening co-efficient were determined from Vicker's microhardness measurements for different loads with constant dwell time. The growth mechanism and the defects were analyzed through chemical etching analysis from various crystallographic planes and etching periods.

  11. 温度对Ib型和I Ia型金刚石大单晶(100)表面特征的影响∗%Effect of temp erature on the (100) surface features of typ e Ib and typ e I Ia large single crystal diamonds

    Institute of Scientific and Technical Information of China (English)

    张贺; 肖宏宇; 李尚升; 宿太超; 胡美华; 周佑默; 樊浩天; 龚春生; 贾晓鹏; 马红安

    2015-01-01

    In this paper, by choosing FeNiMnCo alloy as a catalyst and the (100) face of a seed crystal as the growth face, high quality type Ib and type IIa large diamond single crystals (diameter about 3–4 mm) can be successfully synthesized using temperature gradient method, at 5.6 GPa pressure and different temperatures between 1250–1340 ◦C. To control the diamond crystal morphology, the growth temperature should be adjusted. Then the morphology of the synthesized large diamonds is plate-like at low temperatures, tower-like at medium temperatures, and spire tower-like at high temperatures. For the same crystal morphology, the synthetic temperature of type IIa diamond single crystals is about 30 ◦C higher than that of type Ib. The central and angularity regions of the top (100) surface, for the synthesized samples of type Ib and type IIa large diamond single crystals at different temperatures, are examined by laser Raman microscope respectively. It is found that the black lines of the type Ib and type IIa large diamond single crystals become dimmed and dense on the same top surface from center to the edge. It is indicated that the priority growth mechanism is in the angularity regions, compared with the central regions. Namely the solute of carbon is primarily precipitated in the angularity regions of the (100) surface. With increasing synthesis temperature, the black lines on the top surface (100) of type Ib diamond single crystals become gradually denser, and the characteristics of the lines are transformed from irregular distribution to typical dendritic distribution. The reason of the above results is that the rate of carbon deposition (the growth rate of diamond crystal), which is along the direction of the diamond crystal [100], will gradually rise as the synthesis temperature of the crystal is increased. The characteristics of the lines on the top surfaces (100) of type IIa large diamond single crystals, which are synthesized under different temperatures

  12. Growth and characterization of new semiorganic nonlinear optical and piezoelectric lithium sulfate monohydrate oxalate single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Yadav, Harsh [Crystal Lab, Department of Physics & Astrophysics, University of Delhi, Delhi 110007 (India); Sinha, Nidhi [Department of Physics & Electronics, SGTB Khalsa College, University of Delhi, Delhi 110007 (India); Kumar, Binay, E-mail: b3kumar69@yahoo.co.in [Crystal Lab, Department of Physics & Astrophysics, University of Delhi, Delhi 110007 (India)

    2015-04-15

    Highlights: • A new semiorganic single crystal of LSO grown by slow evaporation technique. • Morphological studies of the LSO crystal deduced by BFDH law. • In the UV–vis spectrum wide transparent region and large band gap were found. • SHG is equal to KDP crystal and d{sub 33} was found to be equal to 6pC/N. • Grown crystal belongs to softer category. - Abstract: New semiorganic crystal of lithium sulfate monohydrate oxalate (LSO) for nonlinear application was synthesized by controlled slow evaporation method. The growth rate of various planes of the grown crystal was estimated by morphological study. Single crystal XRD analysis confirmed that the crystal belongs to triclinic lattice with space group P1. High transparency (∼95%) with large band gap (4.57 eV) was analyzed by UV–vis studies. FTIR and Raman spectroscopy were used to identify various functional groups present in the LSO crystal. SHG efficiency was found to be equal to the KDP crystal. Thermal stability (up to 117.54 °C) and melting point (242 °C) of the crystal were studied by TG-DTA. In dielectric measurements, the value of dielectric constant decreases with increase in frequency. Hardness studies confirmed soft nature of crystals. The piezoelectric coefficient was found to be 6pC/N along [0 0 1].

  13. Oxygen diffusion in single crystal barium titanate.

    Science.gov (United States)

    Kessel, Markus; De Souza, Roger A; Martin, Manfred

    2015-05-21

    Oxygen diffusion in cubic, nominally undoped, (100) oriented BaTiO3 single crystals has been studied by means of (18)O2/(16)O2 isotope exchange annealing and subsequent determination of the isotope profiles in the solid by time-of-flight secondary ion mass spectrometry (ToF-SIMS). Experiments were carried out as a function of temperature 973 coefficient ks*, the space-charge potential Φ0 and the bulk diffusion coefficient D*(∞). Analysis of the temperature and oxygen activity dependencies of D*(∞) and Φ0 yields a consistent picture of both the bulk and the interfacial defect chemistry of BaTiO3. Values of the oxygen vacancy diffusion coefficient DV extracted from measured D*(∞) data are compared with literature data; consequently a global expression for the vacancy diffusivity in BaTiO3 for the temperature range 466 < T/K < 1273 is obtained, with an activation enthalpy of vacancy migration, ΔHmig,V = (0.70 ± 0.04) eV.

  14. Thermomechanical fatigue in single crystal superalloys

    Directory of Open Access Journals (Sweden)

    Moverare Johan J.

    2014-01-01

    Full Text Available Thermomechanical fatigue (TMF is a mechanism of deformation which is growing in importance due to the efficiency of modern cooling systems and the manner in which turbines and associated turbomachinery are now being operated. Unfortunately, at the present time, relatively little research has been carried out particularly on TMF of single crystal (SX superalloys, probably because the testing is significantly more challenging than the more standard creep and low cycle fatigue (LCF cases; the scarcity and relative expense of the material are additional factors. In this paper, the authors summarise their experiences on the TMF testing of SX superalloys, built up over several years. Emphasis is placed upon describing: (i the nature of the testing method, the challenges involved in ensuring that an given testing methodology is representative of engine conditions (ii the behaviour of a typical Re-containing second generation alloy such as CMSX-4, and its differing performance in out-of-phase/in-phase loading and crystallographic orientation and (iii the differences in behaviour displayed by the Re-containing alloys and new Re-free variants such as STAL15. It is demonstrated that the Re-containing superalloys are prone to different degradation mechanisms involving for example microtwinning, TCP precipitation and recrystallisation. The performance of STAL15 is not too inferior to alloys such as CMSX-4, suggesting that creep resistance itself does not correlate strongly with resistance to TMF. The implications for alloy design efforts are discussed.

  15. Excitonic polaritons of zinc diarsenide single crystals

    Science.gov (United States)

    Syrbu, N. N.; Stamov, I. G.; Zalamai, V. V.; Dorogan, A.

    2017-02-01

    Excitonic polaritons of ZnAs2 single crystals had been investigated. Parameters of singlet excitons with D2bar(z) symmetry and orthoexcitons 2D1bar(y)+D2bar(x) had been determined. Spectral dependencies of ordinary and extraordinary dispersion of refractive index had been calculated using interferential reflection and transmittance spectra. It was shown, that A excitonic series were due to hole (V1) and electron (C1) bands. The values of effective masses of electrons (mc*=0.10 m0) and holes (mv1*=0.89 m0) had been estimated. It was revealed that the hole mass mv1* changes from 1.03 m0 to 0.55 m0 at temperature increasing from 10 K up to 230 K and that the electron mass mc* does not depend on temperature. The integral absorption A (eV cm-1) of the states n=1, 2 and 3 of D2bar(z) excitons depends on the An≈n-3 equality, which it is characteristic for S-type excitonic functions. Temperature dependences of the integral absorption of ground states for D2bar(z) and D2bar(D) excitons differ. The ground states of B and C excitons formed by V3 - C1 and V4 - C1 bands and its parameters had been determined.

  16. Growth and Characterization on PMN-PT-Based Single Crystals

    Directory of Open Access Journals (Sweden)

    Jian Tian

    2014-07-01

    Full Text Available Lead magnesium niobate—lead titanate (PMN-PT single crystals have been successfully commercialized in medical ultrasound imaging. The superior properties of PMN-PT crystals over the legacy piezoelectric ceramics lead zirconate titanate (PZT enabled ultrasound transducers with enhanced imaging (broad bandwidth and improved sensitivity. To obtain high quality and relatively low cost single crystals for commercial production, PMN-PT single crystals were grown with modified Bridgman method, by which crystals were grown directly from stoichiometric melt without flux. For ultrasound imaging application, [001] crystal growth is essential to provide uniform composition and property within a crystal plate, which is critical for transducer performance. In addition, improvement in crystal growth technique is under development with the goals of improving the composition homogeneity along crystal growth direction and reducing unit cost of crystals. In recent years, PIN-PMN-PT single crystals have been developed with higher de-poling temperature and coercive field to provide improved thermal and electrical stability for transducer application.

  17. Single crystal micromechanical resonator and fabrication methods thereof

    Energy Technology Data Exchange (ETDEWEB)

    Olsson, Roy H.; Friedmann, Thomas A.; Homeijer, Sara Jensen; Wiwi, Michael; Hattar, Khalid Mikhiel; Clark, Blythe; Bauer, Todd; Van Deusen, Stuart B.

    2016-12-20

    The present invention relates to a single crystal micromechanical resonator. In particular, the resonator includes a lithium niobate or lithium tantalate suspended plate. Also provided are improved microfabrication methods of making resonators, which does not rely on complicated wafer bonding, layer fracturing, and mechanical polishing steps. Rather, the methods allow the resonator and its components to be formed from a single crystal.

  18. Single crystal micromechanical resonator and fabrication methods thereof

    Science.gov (United States)

    Olsson, Roy H.; Friedmann, Thomas A.; Homeijer, Sara Jensen; Wiwi, Michael; Hattar, Khalid Mikhiel; Clark, Blythe; Bauer, Todd; Van Deusen, Stuart B.

    2016-12-20

    The present invention relates to a single crystal micromechanical resonator. In particular, the resonator includes a lithium niobate or lithium tantalate suspended plate. Also provided are improved microfabrication methods of making resonators, which does not rely on complicated wafer bonding, layer fracturing, and mechanical polishing steps. Rather, the methods allow the resonator and its components to be formed from a single crystal.

  19. Large lead tungstate crystals for calorimetry

    CERN Document Server

    Lecomte, P

    2000-01-01

    PbWO//4 crystals have been selected for the CMS Experiment at LHC, rather than the higher light yield but bulkier CeF//3, because space is at a premium in the 4T supraconductive magnet. Early PbWO//4 samples exhibited severe low dose radiation damage, slow components or long term afterglow. Thus, major R&D efforts have been undertaken by the Russian and Chinese producers. Besides improving the control of the raw materials, the stoichiometry and the growth parameters, the R&D efforts explored two avenues: doping of the crystals and oxygen annealing. Both groups have produced full size crystals which satisfy the requirements of CMS, including the low production cost which is an overwhelming consideration and a severe constraint in the optimization of the production process. This paper concentrates on the development of Chinese crystals; it attempts to guide the reader through the complex development process by giving a very brief description of the main steps and issues addressed in the past five years,...

  20. Large area crystallization of amorphous Si with overlapping high repetition rate laser pulses

    KAUST Repository

    Ryu, Sang-Gil

    2012-09-01

    This paper presents a pulsed laser crystallization technique, enabling large area crystallization of amorphous Si to produce grains having well-defined size and orientation. The method is developed by first determining the parameters influencing crystallization induced by single laser pulses of circular cross-sectional profile. In a second step, crystallization by overlapping round spots is examined. The experiments reveal three zones characterized by distinctly different crystallized morphologies following the laser irradiation. One of these zones corresponds to the regime of lateral crystal growth, wherein grains are driven towards the center of the spot by the radial temperature gradient. These findings are then applied to processing via line beam profiles that facilitate large area crystallization upon rapid translation of the specimen. Crystallization of extended areas hinges on the determination of the crystal growth length for a single spot. The pitch between successive pulses is then set on the basis of this information. It is shown that the pulse energy has only a weak effect on the crystal growth length. © 2012 Elsevier B.V.

  1. Large-scale crystallization of proteins for purification and formulation.

    Science.gov (United States)

    Hekmat, Dariusch

    2015-07-01

    Since about 170 years, salts were used to create supersaturated solutions and crystallize proteins. The dehydrating effect of salts as well as their kosmotropic or chaotropic character was revealed. Even the suitability of organic solvents for crystallization was already recognized. Interestingly, what was performed during the early times is still practiced today. A lot of effort was put into understanding the underlying physico-chemical interaction mechanisms leading to protein crystallization. However, it was understood that already the solvation of proteins is a highly complex process not to mention the intricate interrelation of electrostatic and hydrophobic interactions taking place. Although many basic questions are still unanswered, preparative protein crystallization was attempted as illustrated in the presented case studies. Due to the highly variable nature of crystallization, individual design of the crystallization process is needed in every single case. It was shown that preparative crystallization from impure protein solutions as a capture step is possible after applying adequate pre-treatment procedures like precipitation or extraction. Protein crystallization can replace one or more chromatography steps. It was further shown that crystallization can serve as an attractive alternative means for formulation of therapeutic proteins. Crystalline proteins can offer enhanced purity and enable highly concentrated doses of the active ingredient. Easy scalability of the proposed protein crystallization processes was shown using the maximum local energy dissipation as a suitable scale-up criterion. Molecular modeling and target-oriented protein engineering may allow protein crystallization to become part of a platform purification process in the near future.

  2. Single crystal to single crystal transformation and hydrogen-atom transfer upon oxidation of a cerium coordination compound.

    Science.gov (United States)

    Williams, Ursula J; Mahoney, Brian D; Lewis, Andrew J; DeGregorio, Patrick T; Carroll, Patrick J; Schelter, Eric J

    2013-04-15

    Trivalent and tetravalent cerium compounds of the octamethyltetraazaannulene (H2omtaa) ligand have been synthesized. Electrochemical analysis shows a strong thermodynamic preference for the formal cerium(IV) oxidation state. Oxidation of the cerium(III) congener Ce(Homtaa)(omtaa) occurs by hydrogen-atom transfer that includes a single crystal to single crystal transformation upon exposure to an ambient atmosphere.

  3. Excitonic polaritons of zinc diarsenide single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Syrbu, N.N., E-mail: sirbunn@yahoo.com [Technical University of Moldova, Chisinau, Republic of Moldova (Moldova, Republic of); Stamov, I.G. [T.G. Shevchenko State University of Pridnestrovie, Tiraspol, Republic of Moldova (Moldova, Republic of); Zalamai, V.V. [Institute of Applied Physics, Academy of Sciences of Moldova, Chisinau, Republic of Moldova (Moldova, Republic of); Dorogan, A. [Technical University of Moldova, Chisinau, Republic of Moldova (Moldova, Republic of)

    2017-02-01

    Excitonic polaritons of ZnAs{sub 2} single crystals had been investigated. Parameters of singlet excitons with Г{sub 2}¯(z) symmetry and orthoexcitons 2Г{sub 1}¯(y)+Г{sub 2}¯(x) had been determined. Spectral dependencies of ordinary and extraordinary dispersion of refractive index had been calculated using interferential reflection and transmittance spectra. It was shown, that A excitonic series were due to hole (V{sub 1}) and electron (C{sub 1}) bands. The values of effective masses of electrons (m{sub c}{sup *}=0.10 m{sub 0}) and holes (m{sub v1}{sup *}=0.89 m{sub 0}) had been estimated. It was revealed that the hole mass m{sub v1}{sup *} changes from 1.03 m{sub 0} to 0.55 m{sub 0} at temperature increasing from 10 K up to 230 K and that the electron mass m{sub c}{sup *} does not depend on temperature. The integral absorption A (eV cm{sup −1}) of the states n=1, 2 and 3 of Г{sub 2}¯(z) excitons depends on the A{sub n}≈n{sup −3} equality, which it is characteristic for S-type excitonic functions. Temperature dependences of the integral absorption of ground states for Г{sub 2}¯(z) and Г{sub 2}¯(Ñ…) excitons differ. The ground states of B and C excitons formed by V{sub 3} – C{sub 1} and V{sub 4} – C{sub 1} bands and its parameters had been determined.

  4. High-quality bulk hybrid perovskite single crystals within minutes by inverse temperature crystallization

    KAUST Repository

    Saidaminov, Makhsud I.

    2015-07-06

    Single crystals of methylammonium lead trihalide perovskites (MAPbX3; MA=CH3NH3+, X=Br− or I−) have shown remarkably low trap density and charge transport properties; however, growth of such high-quality semiconductors is a time-consuming process. Here we present a rapid crystal growth process to obtain MAPbX3 single crystals, an order of magnitude faster than previous reports. The process is based on our observation of the substantial decrease of MAPbX3 solubility, in certain solvents, at elevated temperatures. The crystals can be both size- and shape-controlled by manipulating the different crystallization parameters. Despite the rapidity of the method, the grown crystals exhibit transport properties and trap densities comparable to the highest quality MAPbX3 reported to date. The phenomenon of inverse or retrograde solubility and its correlated inverse temperature crystallization strategy present a major step forward for advancing the field on perovskite crystallization.

  5. High-quality bulk hybrid perovskite single crystals within minutes by inverse temperature crystallization

    Science.gov (United States)

    Saidaminov, Makhsud I.; Abdelhady, Ahmed L.; Murali, Banavoth; Alarousu, Erkki; Burlakov, Victor M.; Peng, Wei; Dursun, Ibrahim; Wang, Lingfei; He, Yao; Maculan, Giacomo; Goriely, Alain; Wu, Tom; Mohammed, Omar F.; Bakr, Osman M.

    2015-07-01

    Single crystals of methylammonium lead trihalide perovskites (MAPbX3; MA=CH3NH3+, X=Br- or I-) have shown remarkably low trap density and charge transport properties; however, growth of such high-quality semiconductors is a time-consuming process. Here we present a rapid crystal growth process to obtain MAPbX3 single crystals, an order of magnitude faster than previous reports. The process is based on our observation of the substantial decrease of MAPbX3 solubility, in certain solvents, at elevated temperatures. The crystals can be both size- and shape-controlled by manipulating the different crystallization parameters. Despite the rapidity of the method, the grown crystals exhibit transport properties and trap densities comparable to the highest quality MAPbX3 reported to date. The phenomenon of inverse or retrograde solubility and its correlated inverse temperature crystallization strategy present a major step forward for advancing the field on perovskite crystallization.

  6. Simulation of Single Crystal Growth: Heat and Mass Transfer

    CERN Document Server

    Zhmakin, A I

    2015-01-01

    The heat transfer (conductive, convective, radiative) and the related problems (the unknown phase boundary fluid/crystal, the assessment of the quality of the grown crystals) encountered in the melt and vapour growth of single crystal as well as the corresponding macroscopic models are reviewed. The importance of the adequate description of the optical crystal properties (semitransparency, absorption, scattering, refraction, diffuse and specular reflecting surfaces) and their effect on the heat transfer is stressed. The problems of the code verification and validation are discussed; differences between the crystal growth simulation codes intended for the research and for the industrial applications are indicated.

  7. Pressure-induced superconductivity in Bi single crystals

    Science.gov (United States)

    Li, Yufeng; Wang, Enyu; Zhu, Xiyu; Wen, Hai-Hu

    2017-01-01

    Measurements on resistivity and magnetic susceptibility have been carried out for Bi single crystals under pressures up to 10.5 GPa. The temperature dependent resistivity shows a semimetallic behavior at ambient and low pressures (below about 1.6 GPa). This is followed by an upturn of resistivity in the low temperature region when the pressure is increased, which is explained as a semiconductor behavior. This feature gradually gets enhanced up to a pressure of about 2.52 GPa. Then a nonmonotonic temperature dependent resistivity appears upon further increasing pressure, which is accompanied by a strong suppression to the low temperature resistivity upturn. Simultaneously, a superconducting transition occurs at about 3.92 K under a pressure of about 2.63 GPa. With further increasing pressure, a second superconducting transition emerges at about 7 K under about 2.8 GPa. For these two superconducting states, the superconductivity induced magnetic screening volumes are quite large. As the pressure further increases to 8.1 GPa, we observe the third superconducting transition at about 8.2 K. The resistivity measurements under magnetic field allow us to determine the upper critical fields μ0Hc 2 of the superconducting phases. The upper critical field for the phase with Tc=3.92 K is extremely low. Based on the Werthamer-Helfand-Hohenberg (WHH) theory, the estimated value of μ0Hc 2 for this phase is about 0.103 T, while the upper critical field for the phase with Tc=7 K is very high with a value of about 4.56 T. Finally, we present a pressure dependent phase diagram of Bi single crystals. Our results reveal the interesting and rich physics in bismuth single crystals under high pressure.

  8. Physicochemical principles of high-temperature crystallization and single crystal growth methods

    Science.gov (United States)

    Bagdasarov, Kh. S.

    The mechanisms of crystal growth are reviewed, with attention given to the physicochemical reactions taking place in the melt near the phase boundary; phenomena determining physical and chemical kinetics directly at the growth front; solid-phase processes occurring within the crystal. Methods for growing refractory single crystals are discussed with particular reference to the Verneuil method, zone melting, Czhochralskii growth, horizontal directional solidification, and the Stockbarger method. Methods for growing crystals of complex geometrical shapes are also discussed.

  9. A physically based constitutive model for FCC single crystals with a single state variable per slip system

    Science.gov (United States)

    Demir, Eralp

    2017-01-01

    A new, simple and physically consistent dislocation-density-based continuum model is developed in a large-strain crystal plasticity framework. All the constitutive laws are expressed in a simple and unique way in terms of a single state variable dislocation density. The proposed physically based model predicts experimental single-crystal stress-strain curves along different crystal directions more accurately than a classical model with widely accepted constitutive laws. The polycrystal texture predictions from the dislocation-density-based and classical models having the same single-crystal stress-strain characteristics are in good agreement with the classical model when Taylor-type homogenization is used in conjunction with enough number of grains.

  10. The optical properties of bismuth germanium oxide single crystals

    Directory of Open Access Journals (Sweden)

    ANDREJA VALCIC

    2000-09-01

    Full Text Available Bi12GeO20 single crystals were grown by the Czochralski technique. Suitable polishing and etching solutions were determined. Reflection spectra were recorded in the wave numbers range 20–5000 cm–1, and compared with the spectra of Bi12SiO20 single crystals to study the position of the phonon modes. The optical constants of the Bi12GeO20 single crystals were obtained using Kramers-Kronig analysis. The obtained results are dicussed and compared with published data.

  11. Dielectric and baric characteristics of TlS single crystal

    Energy Technology Data Exchange (ETDEWEB)

    Mustafaeva, S.N., E-mail: solmust@gmail.com [Institute of Physics, ANAS, G. Javid prosp. 33, Az 1143 Baku (Azerbaijan); Asadov, M.M. [Institute of Chemical Problems, ANAS, G. Javid prosp. 29, Az 1143 Baku (Azerbaijan); Ismailov, A.A. [Institute of Physics, ANAS, G. Javid prosp. 33, Az 1143 Baku (Azerbaijan)

    2014-11-15

    The investigation of the frequency dependences of the dielectric coefficients and ac-conductivity of the TlS single crystals made it possible to elucidate the nature of dielectric loss and the charge transfer mechanism. Moreover, we evaluated the density and energy spread of localized states near the Fermi level, the average hopping time and the average hopping length. It was shown that the dc-conductivity of the TlS single crystals can be controlled by varying the hydrostatic pressure. This has opened up possibilities for using TlS single crystals as active elements of pressure detectors.

  12. Photon Cascade from a Single Crystal Phase Nanowire Quantum Dot

    DEFF Research Database (Denmark)

    Bouwes Bavinck, Maaike; Jöns, Klaus D; Zieliński, Michal

    2016-01-01

    unprecedented potential to be controlled with atomic layer accuracy without random alloying. We show for the first time that crystal phase quantum dots are a source of pure single-photons and cascaded photon-pairs from type II transitions with excellent optical properties in terms of intensity and line width...... quantum optical properties for single photon application and quantum optics.......We report the first comprehensive experimental and theoretical study of the optical properties of single crystal phase quantum dots in InP nanowires. Crystal phase quantum dots are defined by a transition in the crystallographic lattice between zinc blende and wurtzite segments and therefore offer...

  13. Growth and characterization of diammonium copper disulphate hexahydrate single crystal

    Energy Technology Data Exchange (ETDEWEB)

    Siva Sankari, R. [Department of Physics, Agni College of Technology, Thalambur, Chennai 603103 (India); Perumal, Rajesh Narayana, E-mail: r.shankarisai@gmail.com [Department of Physics, SSN College of Engineering, Kalavakkam, Chennai 603110 (India)

    2014-03-01

    Graphical abstract: Diammonium copper disulphate hexahydrate (DACS) is one of the most promising inorganic dielectric crystals with exceptional mechanical properties. Good quality crystals of DACS were grown by using solution method in a period of 30 days. The grown crystals were subjected to single crystal X-ray diffraction analysis in order to establish their crystalline nature. Thermo gravimetric, differential thermal analysis, FTIR, and UV–vis–NIR analysis were performed for the crystal. Several solid state physical parameters have been determined for the grown crystals. The dielectric constant and the dielectric loss and AC conductivity of the grown crystal were studied as a function of frequency and temperature has been calculated and plotted. - Highlights: • Diammonium copper disulphate is grown for the first time and CCDC number obtained. • Thermal analysis is done to see the stability range of the crystals. • Band gap and UV cut off wavelength of the crystal are determined to be 2.4 eV and 472.86 nm, respectively. • Dielectric constant, dielectric loss and AC conductivity are plotted as a function of applied field. - Abstract: Diammonium copper disulphate hexahydrate is one of the most promising inorganic crystals with exceptional dielectric properties. A good quality crystal was harvested in a 30-day period using solution growth method. The grown crystal was subjected to various characterization techniques like single crystal X-ray diffraction analysis, thermo gravimetric, differential thermal analysis, FTIR, and UV–vis–NIR analysis. Unit cell dimensions of the grown crystal have been identified from XRD studies. Functional groups of the title compounds have been identified from FTIR studies. Thermal stability of the samples was checked by TG/DTA studies. Band gap of the crystal was calculated. The dielectric constant and dielectric loss were studied as a function of frequency of the applied field. AC conductivity was plotted as a function

  14. Lyotropic hexagonal columnar liquid crystals of large colloidal gibbsite platelets

    NARCIS (Netherlands)

    Mourad, M.C.D.; Petukhov, A.V.; Vroege, G.J.; Lekkerkerker, H.N.W.

    2010-01-01

    We report the formation of hexagonal columnar liquid crystal phases in suspensions of large (570 nm diameter), sterically stabilized, colloidal gibbsite platelets in organic solvent. In thin cells these systems display strong iridescence originating from hexagonally arranged columns that are

  15. SHG Materials Based on the AlPO4-5 Single Crystals

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Large AlPO4-5 molecular sieve single crystals with high optical quality were synthesized hydrothermally by using TPA as template. As-synthesized crystals were calcined under O2 atmosphere to remove the organic templates in the channels. Disperse-Red-1 (DR1) and p-nitroaniline (pNA) molecules have been successfully incorporated into the one-dimensional channels of AlPO4-5 single crystals respectively by means of vapor phase diffusion. XRD patterns reveal that the loading of organic molecules has not destroyed the structures of AlPO4-5 crystals. Polarizing microscope and SHG results indicate that the DR1 and pNA molecules are well aligned in a preferred direction along the crystal channels. The different polarization-dependence SH intensity shows that different SHG processes occur in the DR1- and pNA-loaded AlPO4-5 crystals.

  16. Single lepton production at large transverse momentum

    CERN Document Server

    Giele, W T; Kosower, D A

    1993-01-01

    We study the production of single isolated leptons at large transverse momentum, $p_T^\\ell > M_W/2$. The dominant source of such leptons is production of an on-shell $W$ boson recoiling against a hard jet. Vetoing this jet forces the $W$ boson to be produced off resonance and significantly reduces the standard model cross section, thereby enhancing the discovery prospects for non standard model physics. A significant number of events have the topologically interesting signature of a large $p_T$ lepton balancing a jet with little measured missing transverse energy.

  17. Growth and characterization of organic material 4-dimethylaminobenzaldehyde single crystal

    Science.gov (United States)

    Jebin, R. P.; Suthan, T.; Rajesh, N. P.; Vinitha, G.; Madhusoodhanan, U.

    2015-01-01

    The organic material 4-dimethylaminobenzaldehyde single crystals were grown by slow evaporation technique. The grown crystal was confirmed by the single crystal and powder X-ray diffraction analyses. The functional groups of the crystal have been identified from the Fourier Transform Infrared (FTIR) and FT-Raman studies. The optical property of the grown crystal was analyzed by UV-Vis-NIR and photoluminescence (PL) spectral measurements. The thermal behavior of the grown crystal was analyzed by thermogravimetric (TG) and differential thermal analyses (DTA). Dielectric measurements were carried out with different frequencies by using parallel plate capacitor method. The third order nonlinear optical properties of 4-dimethylaminobenzaldehyde was measured by the Z-scan technique using 532 nm diode pumped continuous wave (CW) Nd:YAG laser.

  18. Growth and characterization of DAST crystal with large-thickness

    Science.gov (United States)

    Cao, Lifeng; Teng, Bing; Zhong, Degao; Hao, Lun; Sun, Qing

    2016-10-01

    Highly nonlinear optical 4-N, N-dimethylamino-4-N-methyl stilbazolium tosylate (DAST) crystals with large surface and thickness was grown by the slope nucleation technology with slow-cooling in a high concentration solution. The structure and composition of the crystal were confirmed by X-ray diffraction (XRD). The surface morphology of the crystal was characterized by optical microscope. Growth layers were observed on the (001) surface and several isolated "island layers" were also found. The mechanism of crystal growth was analyzed. Etching behavior of the (001) and (00 1 bar) faces of the crystal was studied with methanol, respectively. Optical properties of the crystal were also characterized by UV-vis-NIR spectrometer. The dielectric constants and the dielectric loss were tested by impedance analyzer.

  19. Large-volume protein crystal growth for neutron macromolecular crystallography.

    Science.gov (United States)

    Ng, Joseph D; Baird, James K; Coates, Leighton; Garcia-Ruiz, Juan M; Hodge, Teresa A; Huang, Sijay

    2015-04-01

    Neutron macromolecular crystallography (NMC) is the prevailing method for the accurate determination of the positions of H atoms in macromolecules. As neutron sources are becoming more available to general users, finding means to optimize the growth of protein crystals to sizes suitable for NMC is extremely important. Historically, much has been learned about growing crystals for X-ray diffraction. However, owing to new-generation synchrotron X-ray facilities and sensitive detectors, protein crystal sizes as small as in the nano-range have become adequate for structure determination, lessening the necessity to grow large crystals. Here, some of the approaches, techniques and considerations for the growth of crystals to significant dimensions that are now relevant to NMC are revisited. These include experimental strategies utilizing solubility diagrams, ripening effects, classical crystallization techniques, microgravity and theoretical considerations.

  20. Single crystal Processing and magnetic properties of gadolinium nickel

    Energy Technology Data Exchange (ETDEWEB)

    Shreve, Andrew John [Iowa State Univ., Ames, IA (United States)

    2012-01-01

    GdNi is a rare earth intermetallic material that exhibits very interesting magnetic properties. Spontaneous magnetostriction occurs in GdNi at T{sub C}, on the order of 8000ppm strain along the c-axis and only until very recently the mechanism causing this giant magnetostriction was not understood. In order to learn more about the electronic and magnetic structure of GdNi, single crystals are required for anisotropic magnetic property measurements. Single crystal processing is quite challenging for GdNi though since the rare-earth transition-metal composition yields a very reactive intermetallic compound. Many crystal growth methods are pursued in this study including crucible free methods, precipitation growths, and specially developed Bridgman crucibles. A plasma-sprayed Gd2O3 W-backed Bridgman crucible was found to be the best means of GdNi single crystal processing. With a source of high-quality single crystals, many magnetization measurements were collected to reveal the magnetic structure of GdNi. Heat capacity and the magnetocaloric effect are also measured on a single crystal sample. The result is a thorough report on high quality single crystal processing and the magnetic properties of GdNi.

  1. The influence of orientation on the stress rupture properties of nickel-base superalloy single crystals

    Science.gov (United States)

    Mackay, R. A.; Maier, R. D.

    1982-01-01

    Constant load creep rupture tests were performed on MAR-M247 single crystals at 724 MPa and 774 C where the effect of anisotropy is prominent. The initial orientations of the specimens as well as the final orientations of selected crystals after stress rupture testing were determined by the Laue back-reflection X-ray technique. The stress rupture lives of the MAR-M247 single crystals were found to be largely determined by the lattice rotations required to produce intersecting slip, because second-stage creep does not begin until after the onset of intersecting slip. Crystals which required large rotations to become oriented for intersecting slip exhibited the shortest stress rupture lives, whereas crystals requiring little or no rotations exhibited the lowest minimum creep rates, and consequently, the longest stress rupture lives.

  2. The refractive index of zinc oxide microwire single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Czekalla, Christian; Kuehne, Philipp; Sturm, Chris; Schmidt-Grund, Ruediger; Grundmann, Marius [Universitaet Leipzig (Germany). Fakultaet fuer Physik und Geowissenschaften, Institut fuer Experimentelle Physik II

    2010-07-01

    Among a large number of applications, zinc oxide (ZnO) single crystals (bulk and micro- and nanowires) are expected to form important building blocks for future optoelectronic devices like light emitting and laser diodes. Optical resonances from ZnO structures have been observed by a number of groups in the past years. In most of the publications, modeling of the mode structure, especially in the near bandgap spectral region, is difficult because the energy dependent refractive index n(E) is typically not known. Additionally, in case of the self assembled micro- and nanowires, the structures are too small to perform spectroscopic ellipsometry to determine n(E). We compare n(E) obtained from (a) spectroscopic ellipsometry measurements of ZnO bulk single crystals and (b) spatially resolved photoluminescence measurements of ZnO microwires employing a plane wave whispering gallery mode model for the observed resonances. We discuss the differences between the results obtained from the two methods and their mutual impact, leading to a highly precise determination of n(E) in an energy range between 1.80 eV and 3.25 eV and for temperatures between 10 K and 295 K.

  3. Hard sphere crystal nucleation and growth near large spherical impurities

    Science.gov (United States)

    de Villeneuve, V. W. A.; Verboekend, D.; Dullens, R. P. A.; Aarts, D. G. A. L.; Kegel, W. K.; Lekkerkerker, H. N. W.

    2005-11-01

    We report how large spherical impurities affect the nucleation and growth of hard sphere colloidal crystals. Both the impurities and the colloids are fluorescently labelled polymethylmetacrylate particles and are dispersed in an optically and density matching solvent mixture. Crystal growth, initiated either at the impurity surface, or at the sample bottom, was studied by imaging sequences of two-dimensional xy-slices in the plane of the impurity's centre of mass with a laser scanning confocal microscope. At least two factors determine whether a large impurity can function as a seed for heterogeneous nucleation: timescales and impurity curvature. The curvature needs to be sufficiently low for crystal nuclei to form on the impurity surface. If bulk crystal growth has already approached the impurity, bulk growth is dominant over growth of crystallites on the impurity surface. Such surface crystallites eventually reorient to adapt to the overall bulk crystal symmetry.

  4. Single-Crystal Bismuth Iodide Gamma-Ray Spectrometers

    Science.gov (United States)

    2012-02-01

    grow high quality Bib single crystals (> 1 cm3 in volume) via a high temperature modified Bridgman crystal growth technique. We will then test and...methods to improve Bib crystals. Finally, test structures will be designed and their performance will be assessed using a variety of small, calibrated...characteristics of the test structures (basic material properties for Bib ). While the main objectives of the project have not changed, more emphasis is

  5. Orientation dependence of the stress rupture properties of Nickel-base superalloy single crystals

    Science.gov (United States)

    Mackay, R. A.

    1981-01-01

    The influence of orientation of the stress rupture behavior of Mar-M247 single crystals was studied. Stress rupture tests were performed at 724 MPa and 774 C where the effect of anisotropy is prominent. The mechanical behavior of the single crystals was rationalized on the basis of the Schmid factors for the operative slip systems and the lattice rotations which the crystals underwent during deformation. The stress rupture lives were found to be greatly influenced by the lattice rotations required to produce intersecting slip, because steady-state creep does not begin until after the onset of intersecting slip. Crystals which required large rotations to become oriented for intersecting slip exhibited a large primary creep strain, a large effective stress level at the onset of steady-state creep, and consequently a short stress rupture life. A unified analysis was attained for the stress rupture behavior of the Mar-M247 single crystals tested in this study at 774 C and that of the Mar-M200 single crystals tested in a prior study at 760 C. In this analysis, the standard 001-011-111 stereographic triangle was divided into several regions of crystallographic orientation which were rank ordered according to stress rupture life for this temperature regime. This plot indicates that those crystals having orientations within about 25 deg of the 001 exhibited significantly longer lives when their orientations were closer to the 001-011 boundary of the stereographic triangle than to the 001-111 boundary.

  6. Orientation dependence of the stress rupture properties of Nickel-base superalloy single crystals

    Science.gov (United States)

    Mackay, R. A.

    1981-05-01

    The influence of orientation of the stress rupture behavior of Mar-M247 single crystals was studied. Stress rupture tests were performed at 724 MPa and 774 C where the effect of anisotropy is prominent. The mechanical behavior of the single crystals was rationalized on the basis of the Schmid factors for the operative slip systems and the lattice rotations which the crystals underwent during deformation. The stress rupture lives were found to be greatly influenced by the lattice rotations required to produce intersecting slip, because steady-state creep does not begin until after the onset of intersecting slip. Crystals which required large rotations to become oriented for intersecting slip exhibited a large primary creep strain, a large effective stress level at the onset of steady-state creep, and consequently a short stress rupture life. A unified analysis was attained for the stress rupture behavior of the Mar-M247 single crystals tested in this study at 774 C and that of the Mar-M200 single crystals tested in a prior study at 760 C. In this analysis, the standard 001-011-111 stereographic triangle was divided into several regions of crystallographic orientation which were rank ordered according to stress rupture life for this temperature regime. This plot indicates that those crystals having orientations within about 25 deg of the 001 exhibited significantly longer lives when their orientations were closer to the 001-011 boundary of the stereographic triangle than to the 001-111 boundary.

  7. Growth and properties of Lithium Salicylate single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Zaitseva, N; Newby, J; Hull, G; Saw, C; Carman, L; Cherepy, N; Payne, S

    2009-02-13

    An attractive feature of {sup 6}Li containing fluorescence materials that determines their potential application in radiation detection is the capture reaction with slow ({approx}< 100 keV) neutrons: {sup 6}Li + n = {sup 4}He + {sup 3}H + 4.8MeV. The use of {sup 6}Li-salicylate (LiSal, LiC{sub 6}H{sub 5}O{sub 3}) for thermal neutron detection was previously studied in liquid and polycrystalline scintillators. The studies showed that both liquid and polycrystalline LiSal scintillators could be utilized in pulse shape discrimination (PSD) techniques that enable separation of neutrons from the background gamma radiation. However, it was found that the efficiency of neutron detection using LiSal in liquid solutions was severely limited by its low solubility in commonly used organic solvents like, for example, toluene or xylene. Better results were obtained with neutron detectors containing the compound in its crystalline form, such as pressed pellets, or microscopic-scale (7-14 micron) crystals dispersed in various media. The expectation drown from these studies was that further improvement of pulse height, PSD, and efficiency characteristics could be reached with larger and more transparent LiSal crystals, growth of which has not been reported so far. In this paper, we present the first results on growth and characterization of relatively large, a cm-scale size, single crystals of LiSal with good optical quality. The crystals were grown both from aqueous and anhydrous (methanol) media, mainly for neutron detection studies. However, the results on growth and structural characterization may be interesting for other fields where LiSal, together with other alkali metal salicylates, is used for biological, medical, and chemical (as catalyst) applications.

  8. Single crystals of V Amylose complexed with glycerol

    NARCIS (Netherlands)

    Hulleman, S.H.D.; Helbert, W.; Chanzy, H.

    1996-01-01

    Lamellar single crystals of amylose V glycerol were grown at 100°C by evaporating water from solutions of amylose in aqueous glycerol. The crystals which were square, with lateral dimensions of several micrometers, gave sharp electron diffraction patterns presenting an orthorhombic symmetry with a p

  9. Growth features of ammonium hydrogen -tartrate single crystals

    Indian Academy of Sciences (India)

    G Sajeevkumar; R Raveendran; B S Remadevi; Alexander Varghese Vaidyan

    2004-08-01

    Ammonium hydrogen -tartrate (-AHT) single crystals were grown in silica gel. The growth features of these crystals with variation of parameters like specific gravity of the gel, gel pH, acid concentrations, concentration of the feed solution and gel age were studied in detail.

  10. Ellipsometric studies of ErMnO3 single crystals

    DEFF Research Database (Denmark)

    Babonas, G.-J.; Grivel, Jean-Claude; Reza, A.

    2007-01-01

    Ellipsometric studies of ErMnO3 single crystals have been carried out in the spectral range of 1-5 eV by means of photometric ellipsometers. Experimental ellipsometric data were analysed in the uniaxial crystal model. For the first time, the components of dielectric function of ErMnO3 were...

  11. Ellipsometric studies of ErMnO3 single crystals

    DEFF Research Database (Denmark)

    Babonas, G.-J.; Grivel, Jean-Claude; Reza, A.;

    2007-01-01

    Ellipsometric studies of ErMnO3 single crystals have been carried out in the spectral range of 1-5 eV by means of photometric ellipsometers. Experimental ellipsometric data were analysed in the uniaxial crystal model. For the first time, the components of dielectric function of ErMnO3 were...

  12. Synthesis, Growth, and Characterization of Bisglycine Hydrobromide Single Crystal

    Directory of Open Access Journals (Sweden)

    Koteeswari Pandurangan

    2014-01-01

    Full Text Available Single crystals of BGHB were grown by slow evaporation technique. The unit cell dimensions and space group of the grown crystals were confirmed by single crystal X-ray diffraction. The modes of vibration of the molecules and the presence of functional groups were identified using FTIR technique. The microhardness study shows that the Vickers hardness number of the crystal increases with the increase in applied load. The optical properties of the crystals were determined using UV-Visible spectroscopy. The thermal properties of the grown crystal were also determined. The refractive index was determined as 1.396 using Brewster’s angle method. The emission of green light on passing the Nd: YAG laser light confirmed the second harmonic generation property of the crystals and the SHG efficiency of the crystals was found to be higher than that of KDP. The dielectric constant and dielectric loss measurements were carried out for different temperatures and frequencies. The ac conductivity study of the crystals was also discussed. The photoconductivity studies confirm that the grown crystal has negative photoconductivity nature. The etching studies were carried out to study the formation of etch pits.

  13. Dielectric behaviour of strontium tartrate single crystals

    Indian Academy of Sciences (India)

    S K Arora; Vipul Patel; Brijesh Amin; Anjana Kothari

    2004-04-01

    Strontium tartrate trihydrate (STT) crystals have been grown in silica hydrogel. Various polarization mechanisms such as atomic polarization of lattice, orientational polarization of dipoles and space charge polarization in the grown crystals have been understood using results of the measurements of dielectric constant (') and dielectric loss (tan ) as functions of frequency and temperature. Ion core type polarization is seen in the temperature range 75–180°C, and above 180°C, there is interfacial polarization for relatively lower frequency range. One observes dielectric dispersion at lower frequency presumably due to domain wall relaxation.

  14. Process for Forming a High Temperature Single Crystal Canted Spring

    Science.gov (United States)

    DeMange, Jeffrey J (Inventor); Ritzert, Frank J (Inventor); Nathal, Michael V (Inventor); Dunlap, Patrick H (Inventor); Steinetz, Bruce M (Inventor)

    2017-01-01

    A process for forming a high temperature single crystal canted spring is provided. In one embodiment, the process includes fabricating configurations of a rapid prototype spring to fabricate a sacrificial mold pattern to create a ceramic mold and casting a canted coiled spring to form at least one canted coil spring configuration based on the ceramic mold. The high temperature single crystal canted spring is formed from a nickel-based alloy containing rhenium using the at least one coil spring configuration.

  15. HEiDi: Single crystal diffractometer at hot source

    Directory of Open Access Journals (Sweden)

    Martin Meven

    2015-08-01

    Full Text Available The single crystal diffractometer HEiDi, which is operated by the Institute of Crystallography, RWTH Aachen University and JCNS, Forschungszentrum Jülich, is designed for detailed studies on structural and magnetic properties of single crystals using unpolarised neutrons and Bragg’s Law: 2dhklsinθ = λ (typically 0.55 Å <λ< 1.2 Å.

  16. BioDiff - a neutron diffractometer optimized for crystals with large unit cell dimensions

    OpenAIRE

    Schrader, Tobias Erich; Ostermann, Andreas; Monkenbusch, Michael; Laatsch, Bernhard; Jüttner, Philipp; Petry, Winfried; Richter, Dieter

    2014-01-01

    The research reactor Heinz Maier-Leibnitz (FRM II) is a modern high flux neutron source which feeds some 30 state of the art neutron beam instruments. Currently 24 are operational, others in commissioning or under construction. The newly built neutron single crystal diffractometer BIODIFF is especially designed to collect data from crystals with large unit cells. The main field of application is the structural analysis of proteins, especially the determination of hydrogen atom positions. BIOD...

  17. Introduction to the Growth of Bulk Single Crystals of Two-Dimensional Transition-Metal Dichalcogenides

    Science.gov (United States)

    Ueno, Keiji

    2015-12-01

    Semiconducting two-dimensional transition-metal dichalcogenides (MX2) are attracting much attention as promising materials for a new generation of optical and electronic devices. MX2 compounds are complementary or competitive to graphene because of the existence of a native band gap. The growth of large and high-quality bulk single crystals is one of the critical issues for the application of MX2 compounds, whose bulk crystals are generally grown by the chemical vapor transport (CVT) method. In the present review, I introduce experimental techniques required for the CVT growth of high-quality MX2 single crystals.

  18. Single crystal growth of europium and ytterbium based intermetallic compounds using metal flux technique

    Indian Academy of Sciences (India)

    Sumanta Sarkar; Sebastian C Peter

    2012-11-01

    This article covers the use of indium as a potential metal solvent for the crystal growth of europium and ytterbium-based intermetallic compounds. A brief view about the advantage of metal flux technique and the use of indium as reactive and non-reactive flux are outlined. Large single crystals of EuGe2, EuCoGe3 and Yb2AuGe3 compounds were obtained in high yield from the reactions of the elements in liquid indium. The results presented here demonstrate that considerable advances in the discovery of single crystal growth of complex phases are achievable utilizing molten metals as solvents.

  19. Large scale structures in liquid crystal/clay colloids

    Energy Technology Data Exchange (ETDEWEB)

    Duijneveldt, Jeroen S van [School of Chemistry, Cantock' s Close, University of Bristol, Bristol BS8 1TS (United Kingdom); Klein, Susanne [HP Laboratories, Filton Road, Stoke Gifford, Bristol BS34 8QZ (United Kingdom); Leach, Edward [HP Laboratories, Filton Road, Stoke Gifford, Bristol BS34 8QZ (United Kingdom); Pizzey, Claire [School of Chemistry, Cantock' s Close, University of Bristol, Bristol BS8 1TS (United Kingdom); Richardson, Robert M [H H Wills Physics Laboratory, Tyndall Avenue, University of Bristol, Bristol BS8 1TL (United Kingdom)

    2005-04-20

    Suspensions of three different clays in K15, a thermotropic liquid crystal, have been studied by optical microscopy and small angle x-ray scattering. The three clays were claytone AF, a surface treated natural montmorillonite, laponite RD, a synthetic hectorite, and mined sepiolite. The claytone and laponite were sterically stabilized whereas sepiolite formed a relatively stable suspension in K15 without any surface treatment. Micrographs of the different suspensions revealed that all three suspensions contained large scale structures. The nature of these aggregates was investigated using small angle x-ray scattering. For the clays with sheet-like particles, claytone and laponite, the flocs contain a mixture of stacked and single platelets. The basal spacing in the stacks was independent of particle concentration in the suspension and the phase of the solvent. The number of platelets in the stack and their percentage in the suspension varied with concentration and the aspect ratio of the platelets. The lath shaped sepiolite did not show any tendency to organize into ordered structures. Here the aggregates are networks of randomly oriented single rods.

  20. Blocks and residual stresses in shaped sapphire single crystals

    Science.gov (United States)

    Krymov, V. M.; Nosov, Yu. G.; Bakholdin, S. I.; Maslov, V. N.; Shul‧pina, I. L.; Nikolaev, V. I.

    2017-01-01

    The formation of blocks and residual stresses in shaped sapphire crystals grown from the melt by the Stepanov method (EFG) has been studied. The probability of block formation is higher for the growth along the c axis compared to that grown in the a-axis direction. The distribution of residual stress in sapphire crystals of tubular, rectangular and round cross section was measured by the conoscopy method. It was found that the magnitude of the residual stress increases from the center to the periphery of the crystal and reaches up to about 20 MPa. Residual stress tensor components for solid round rod and tubular single crystals were determined by numerical integration.

  1. Recombining overlapping BACs into single large BACs.

    Science.gov (United States)

    Kotzamanis, George; Kotsinas, Athanassios

    2015-01-01

    BAC clones containing the entire genomic region of a gene including the long-range regulatory elements are very useful for gene functional analysis. However, large genes often span more than the insert of a BAC clone, and single BACs covering the entire region of interest are not available. Here, we describe a general system for linking two or more overlapping BACs into a single clone. Two rounds of homologous recombination are used. In the first, the BAC inserts are subcloned into the pBACLink vectors. In the second, the two BACs are combined together. Multiple BACs in a contig can be combined by alternating use of the pBACLInk vectors, resulting in several BAC clones containing as much of the genomic region of a gene as required. Such BACs can then be used in gene expression studies and/or gene therapy applications.

  2. Optical studies of neutron-irradiated lithium hydride single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Oparin, D.V.; Pilipenko, G.I.; Tyutyunnik, O.I.; Gavrilov, F.F.; Sulimov, E.M. (Ural' skij Politekhnicheskij Inst., Sverdlovsk (USSR))

    1984-09-01

    Lithium hydride single crystals irradiated with neutrons were studied by the optical method. Wide bands belonging to the large F-aggregate and quasimetallic F-centres and to the metallic lithium colloids were discovered in the absorption spectra at room temperature. The small Fsub(n)-centres and molecular lithium centres were detected at 77 K. From the electron-vibrational structure of the absorption spectra of these centres the energies of acoustic phonons in X, W, L points of the Brillouin zone of lithium hydride have been found out: TA(L)-235 cm/sup -1/, TA(X)-27g cm/sup -1/, TA(W)-327 cm/sup -1/, LA(W)-384 cm/sup -1/, LA(X)-426 cm/sup -1/.

  3. Shock compression experiments on Lithium Deuteride single crystals.

    Energy Technology Data Exchange (ETDEWEB)

    Knudson, Marcus D.; Desjarlais, Michael Paul; Lemke, Raymond W.

    2014-10-01

    S hock compression exper iments in the few hundred GPa (multi - Mabr) regime were performed on Lithium Deuteride (LiD) single crystals . This study utilized the high velocity flyer plate capability of the Sandia Z Machine to perform impact experiments at flyer plate velocities in the range of 17 - 32 km/s. Measurements included pressure, density, and temperature between %7E200 - 600 GPa along the Principal Hugoniot - the locus of end states achievable through compression by large amplitude shock waves - as well as pressure and density of re - shock states up to %7E900 GPa . The experimental measurements are compared with recent density functional theory calculations as well as a new tabular equation of state developed at Los Alamos National Labs.

  4. Growth and characterization of organic single crystal benzyl carbamate

    Science.gov (United States)

    Bala Solanki, S. Siva; Perumal, Rajesh Narayana; Suthan, T.; Bhagavannarayana, G.

    2015-10-01

    Benzyl carbamate single crystal is grown by a solution and vertical Bridgman technique for the first time. The cell parameters and morphologies are assessed from single crystal X-ray diffraction analysis. High resolution X-ray diffraction analysis indicates the crystalline perfection of the grown benzyl carbamate crystal. Fourier Transforms Infrared spectroscopy study has been applied to arrive at the different functional groups. Thermo gravimetric analysis and differential scanning calorimetry are used to study its thermal behavior. The microhardness test is carried out and the load dependent hardness is measured.

  5. Studies on crystal growth and physical properties of 2-amino-5-chloropyridine single crystal

    Energy Technology Data Exchange (ETDEWEB)

    Suthan, T. [Centre for Crystal Growth, SSN College of Engineering, Kalavakkam 603 110 (India); Rajesh, N.P., E-mail: rajeshnp@hotmail.com [Centre for Crystal Growth, SSN College of Engineering, Kalavakkam 603 110 (India); Mahadevan, C.K. [Physics Research Centre, S.T. Hindu College, Nagercoil 629 002 (India); Bhagavannarayana, G. [C.G.C. Section, National Physical Laboratory, New Delhi 110 012 (India)

    2011-09-15

    Graphical abstract: 2-Amino-5-chloropyridine single crystal. Highlights: {yields} 2-Amino-5-chloropyridine single crystals grown by slow evaporation technique. {yields} Use acetone as solvent. {yields} Grown crystal conformed by XRD and FTIR. {yields} HRXRD, optical, thermal, dielectric and mechanical studies were analyzed. - Abstract: Organic 2-amino-5-chloropyridine single crystals have been grown by slow evaporation technique successfully. The grown crystal was confirmed by single and powder X-ray diffraction studies. The presence of functional groups was identified by Fourier transform infrared (FTIR) study. High resolution X-ray diffraction (HRXRD) analysis indicates the crystalline perfection of the grown crystal. UV-Vis-NIR analysis was performed to examine the optical property of the grown crystal. The thermal property of the grown crystal was studied by thermogravimetric analysis (TGA) and differential thermal analysis (DTA). The dielectric measurements were carried out and the results indicate an increase in dielectric and conductivity parameters with the increase of temperature at all frequencies. The Vicker's hardness study reveals that the grown crystal is in soft nature.

  6. The lattice parameter of highly pure silicon single crystals

    Science.gov (United States)

    Becker, P.; Scyfried, P.; Siegert, H.

    1982-08-01

    From crystal to crystal comparison, the d 220 lattice spacing in PERFX and WASO silicon crystals used in the only two existing absolute measurements have been found to be equal within ±2×10-7 d 220. This demonstrates that generic variabilities of the two crystals account only for a small part of the 1.8×10-6 d 220 difference in the two absolute measurements. In a new series of 336 single measurements, our d 220 value reported recently has been confirmed within ±2×10-8 d 220. From these results we derive the following lattice parameter for highly pure silicon single crystals: a 0=(543 102.018±0.034) fm (at 22.5°C, in vacuum).

  7. The optical properties of alkali nitrate single crystals

    Science.gov (United States)

    Anan'ev, Vladimir; Miklin, Mikhail

    2000-08-01

    Absorption of non-polarized light by a uniaxial crystal has been studied. The degree of absorption polarization has been calculated as a function of the ratio of optical densities in the region of low and high absorbances. This function is proposed for analysis of the qualitative and quantitative characteristics of uniaxial crystal absorption spectra. Non-polarized light spectra of alkali nitrate single crystals, both pure and doped with thallium, have been studied. It is shown that the absorption band at 300 nm is due to two transitions, whose intensities depend on temperature in various ways. There is a weak band in a short wavelength range of the absorption spectrum of potassium nitrate crystal, whose intensity increases with thallium doping. The band parameters of alkali nitrate single crystals have been calculated. Low-energy transitions in the nitrate ion have been located.

  8. Growth and properties of benzil doped benzimidazole (BMZ) single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Babu, R. Ramesh, E-mail: rampap2k@yahoo.co.in [Crystal Growth and Thin Film Laboratory, School of Physics, Bharathidasan University, Tiruchirappalli 620 024 (India); Crystal Growth and Crystallography Section, National Physical Laboratory, Krishnan Marg, New Delhi 110 012 (India); Sukumar, M. [Crystal Growth and Thin Film Laboratory, School of Physics, Bharathidasan University, Tiruchirappalli 620 024 (India); Vasudevan, V. [Crystal Growth and Thin Film Laboratory, School of Physics, Bharathidasan University, Tiruchirappalli 620 024 (India); Crystal Growth and Crystallography Section, National Physical Laboratory, Krishnan Marg, New Delhi 110 012 (India); Shakir, Mohd. [Crystal Growth and Crystallography Section, National Physical Laboratory, Krishnan Marg, New Delhi 110 012 (India); Ramamurthi, K. [Crystal Growth and Thin Film Laboratory, School of Physics, Bharathidasan University, Tiruchirappalli 620 024 (India); Bhagavannarayana, G. [Crystal Growth and Crystallography Section, National Physical Laboratory, Krishnan Marg, New Delhi 110 012 (India)

    2010-09-15

    In the present work, we have made an attempt to study the effect of benzil doping on the properties of benzimidazole single crystals. For this purpose we have grown pure and benzil doped benzimidazole single crystals by vertical Bridgman technique. The grown crystals were characterized by various characterization techniques. The presence of dopants confirmed by powder X-ray diffraction (XRD). Crystalline perfection of the grown crystals has been analysed by high-resolution X-ray diffraction (HRXRD). The transmittance, electrical property and mechanical strength have been analysed using UV-vis-NIR spectroscopic, dielectric and Vicker's hardness studies. The relative second harmonic generation efficiency of pure and doped benzimidazole crystals measured using Kurtz powder test.

  9. Anisotropic behaviour of semiconducting tin monosulphoselenide single crystals

    Indian Academy of Sciences (India)

    T H Patel; Rajiv Vaidya; S G Patel

    2003-10-01

    Single crystals of ternary mixed compounds of group IV–VI in the form of a series, SnSSe1- (where = 0, 0.25, 0.50, 0.75 and 1), have been grown using direct vapour transport technique. The grown crystals were characterized by the X-ray diffraction analysis for their structural parameter determination. All the grown crystals were found to be orthorhombic. The microstructure analysis of the grown crystals reveals their layered type growth mechanism. From the Hall effect measurements Hall mobility, Hall coefficient and carrier concentration were calculated with all crystals showing -type nature. The d.c. electrical resistivity measurements perpendicular to -axis (i.e. along the basal plane) in the temperature range 303–453 K were carried out for grown crystals using four-probe method. The d.c. electrical resistivity measurements parallel to -axis (i.e. perpendicular to basal plane) in the temperature range 303–453 K were carried out for the same crystals. The electrical resistivity measurements showed an anisotropic behaviour of electrical resistivity for the grown crystals. The anisotropic behaviour and the effect of change in stoichiometric proportion of S and Se content on the electrical properties of single crystals of the series, SnSSe1- (where = 0, 0.25, 0.50, 0.75 and 1), is presented systematically.

  10. Solution Coating of Superior Large-Area Flexible Perovskite Thin Films with Controlled Crystal Packing

    KAUST Repository

    Li, Jianbo

    2017-05-08

    Solution coating of organohalide lead perovskites offers great potential for achieving low-cost manufacturing of large-area flexible optoelectronics. However, the rapid coating speed needed for industrial-scale production poses challenges to the control of crystal packing. Herein, this study reports using solution shearing to confine crystal nucleation and growth in large-area printed MAPbI3 thin films. Near single-crystalline perovskite microarrays are demonstrated with a high degree of controlled macroscopic alignment and crystal orientation, which exhibit significant improvements in optical and optoelectronic properties comparing with their random counterparts, spherulitic, and nanograined films. In particular, photodetectors based on the confined films showing intense anisotropy in charge transport are fabricated, and the device exhibits significantly improved performance in all aspects by one more orders of magnitude relative to their random counterparts. It is anticipated that perovskite films with controlled crystal packing may find applications in high-performance, large-area printed optoelectronics, and solar cells.

  11. Mesoporous zeolite single crystals for catalytic hydrocarbon conversion

    DEFF Research Database (Denmark)

    Schmidt, I.; Christensen, C.H.; Hasselriis, Peter

    2005-01-01

    transport to and from active sites and at the same time maintain the shape-selectivity required. Thus, all these results support the idea that the beneficial effect of the mesopores system in the mesoporous zeolite single crystals call be solely attributed to enhanced mass transport.......Recently, mesoporous zeolite single crystals were discovered. They constitute a novel family of materials that features a combined micropore and mesopore architecture within each individual crystal. Here, we briefly summarize recent catalytic results from cracking and isomerization of alkalies......, alkylation of aromatics and present new results on isomerization of aromatics. Specifically, the shape-selective isomerization of meta-xylenc into para-xylene and ortho-xylene is studied. In all these reactions, rnesoporous zeolite single crystals prove to be unique catalysts since they provide easy...

  12. Mesoporous zeolite single crystals for catalytic hydrocarbon conversion

    DEFF Research Database (Denmark)

    Schmidt, I.; Christensen, C.H.; Hasselriis, Peter

    2005-01-01

    Recently, mesoporous zeolite single crystals were discovered. They constitute a novel family of materials that features a combined micropore and mesopore architecture within each individual crystal. Here, we briefly summarize recent catalytic results from cracking and isomerization of alkalies......, alkylation of aromatics and present new results on isomerization of aromatics. Specifically, the shape-selective isomerization of meta-xylenc into para-xylene and ortho-xylene is studied. In all these reactions, rnesoporous zeolite single crystals prove to be unique catalysts since they provide easy...... transport to and from active sites and at the same time maintain the shape-selectivity required. Thus, all these results support the idea that the beneficial effect of the mesopores system in the mesoporous zeolite single crystals call be solely attributed to enhanced mass transport....

  13. Chemical Bond Analysis of Single Crystal Growth of Magnesium Oxide

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Starting from the crystallographic structure of magnesium oxide (MgO), both the chemical bond model of solids and Pauling's third rule (polyhedral sharing rule) were employed to quantitatively analyze the chemical bonding structure of constituent atoms and single crystal growth. Our analytical results show that MgO single crystals prefer to grow along the direction and the growth rate of the {100} plane is the slowest one. Therefore, the results show that the {100} plane of MgO crystals can be the ultimate morphology face, which is in a good agreement with our previous experimental results. The study indicate that the structure analysis is an effective tool to control the single-crystal growth.

  14. Large photovoltages generated by plant photosystem I crystals

    Energy Technology Data Exchange (ETDEWEB)

    Toporik, Hila; Carmeli, Chanoch; Nelson, Nathan [Department of Biochemistry and Molecular Biology, Faculty of Life Sciences, Tel Aviv University, Tel Aviv 69978 (Israel); Carmeli, Itai [School of Chemistry, Faculty of Exact Sciences, Tel Aviv University, Tel Aviv 69978 (Israel); Volotsenko, Irina; Molotskii, Michel; Rosenwaks, Yossi [Department of Physical Electronics, Faculty of Engineering, Tel Aviv University, Tel Aviv 69978 (Israel)

    2012-06-12

    Micrometer-thick plant photosystem I crystals made of up to 1000 layers of serially arranged protein complexes generate unprecedented high photovoltages when placed on a conducting solid surface and measured using Kelvin probe force microscopy. The successive layers form serially photoinduced dipoles in the crystal that give rise to electric fields as large as 100 kV cm{sup -1}. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  15. Growth of BPO 4 single crystals from Li 2O-MoO 3 flux

    Science.gov (United States)

    Zhang, Shufeng; Zhang, Erpan; Fu, Peizhen; Wu, Yicheng

    2009-04-01

    A new flux system, Li 2O-MoO 3, has been applied to growing BPO 4 single crystals. Transparent BPO 4 single crystals with sizes up to 31×18×16 mm 3 have been successfully grown from the new flux by the top-seeded solution growth method. The viscosity of solution using this new flux decreased significantly compared with that of previously utilized Li 4P 2O 7-Li 2O flux. The solubility was measured and favorable concentration for BPO 4 crystal growth was in the range of 55-64%. The powder SHG effect of as-grown BPO 4 crystal was observed and its intensity was about twice as large as that of KDP. The laser damage threshold of BPO 4 crystal at λ=1.064 nm and τ=8.0 ns is about 10.3 GW/cm 2.

  16. Floating zone growth of α-Na0.90MnO2 single crystals

    Science.gov (United States)

    Dally, Rebecca; Clément, Raphaële J.; Chisnell, Robin; Taylor, Stephanie; Butala, Megan; Doan-Nguyen, Vicky; Balasubramanian, Mahalingam; Lynn, Jeffrey W.; Grey, Clare P.; Wilson, Stephen D.

    2017-02-01

    Single crystal growth of α-NaxMnO2 (x=0.90) is reported via the floating zone technique. The conditions required for stable growth and intergrowth-free crystals are described along with the results of trials under alternate growth atmospheres. Chemical and structural characterizations of the resulting α-Na0.90MnO2 crystals are performed using ICP-AES NMR, XANES, XPS, and neutron diffraction measurements. As a layered transition metal oxide with large ionic mobility and strong correlation effects, α-NaxMnO2 is of interest to many communities, and the implications of large volume, high purity, single crystal growth are discussed.

  17. Inspection of Single Crystal Aerospace Components with Ultrasonic Arrays

    Science.gov (United States)

    Lane, C. J. L.; Dunhill, A.; Drinkwater, B. W.; Wilcox, P. D.

    2010-02-01

    Single crystal metal alloys are used extensively in the manufacture of jet engine components for their excellent mechanical properties at elevated temperatures. The increasing use of these materials and demand for longer operational life and improved reliability motivates the requirement to have capable NDE methods available. Ultrasonic arrays are well established at detecting sub-surface defects however these methods are not currently suitable to the inspection of single crystal components due to their high elastic anisotropy causing directional variation in ultrasonic waves. In this paper a model of wave propagation in anisotropic material is used to correct an ultrasonic imaging algorithm and is applied to single crystal test specimens. The orientation of the crystal in a specimen must be known for this corrected-algorithm; therefore a crystal orientation method is also presented that utilizes surface skimming longitudinal waves under a 2D array. The work detailed in this paper allows an ultrasonic 2D array to measure the orientation of a single crystal material and then perform accurate volumetric imaging to detect and size defects.

  18. Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals

    KAUST Repository

    Shi, Dong

    2015-01-29

    The fundamental properties and ultimate performance limits of organolead trihalide MAPbX3(MA = CH3NH3 +; X = Br- or I- ) perovskites remain obscured by extensive disorder in polycrystalline MAPbX3 films. We report an antisolvent vapor-assisted crystallization approach that enables us to create sizable crack-free MAPbX3 single crystals with volumes exceeding 100 cubic millimeters. These large single crystals enabled a detailed characterization of their optical and charge transport characteristics.We observed exceptionally low trap-state densities on the order of 109 to 1010 per cubic centimeter in MAPbX3 single crystals (comparable to the best photovoltaic-quality silicon) and charge carrier diffusion lengths exceeding 10 micrometers. These results were validated with density functional theory calculations.

  19. Crystal front shape control by use of an additional heater in a Czochralski sapphire single crystal growth system

    Science.gov (United States)

    Hur, Min-Jae; Han, Xue-Feng; Choi, Ho-Gil; Yi, Kyung-Woo

    2017-09-01

    The quality of sapphire single crystals used as substrates for LED production is largely influenced by two defects: dislocation density and bubbles trapped in the crystal. In particular, the dislocation density has a higher value in sapphire grown by the Czochralski (CZ) method than by other methods. In the present study, we predict a decreased value for the convexity and thermal gradient at the crystal front (CF) through the use of an additional heater in an induction-heated CZ system. In addition, we develop a solute concentration model by which the location of bubble formation in CZ growth is calculated, and the results are compared with experimental results. We further calculate the location of bubble entrapment corresponding with the use of an additional heater. We find that sapphire crystal growth with an additional heater yields a decreased thermal gradient at the CF, together with decreased CF convexity, improved energy efficiency, and improvements in terms of bubble formation location.

  20. Anisotropic surface hole-transport property of triphenylamine-derivative single crystal prepared by solution method

    Science.gov (United States)

    Umeda, Minoru; Katagiri, Mitsuhiko; Shironita, Sayoko; Nagayama, Norio

    2016-12-01

    This paper reports the anisotropic hole transport at the triphenylamine-derivative single crystal surface prepared by a solution method. Triphenylamine derivatives are commonly used in a hole-transport material for organic photoconductors of laser-beam printers, in which the materials are used as an amorphous form. For developing organic photovoltaics using the photoconductor's technology, preparation of a single crystal seems to be a specific way by realizing the high mobility of an organic semiconductor. In this study, a single crystal of 4-(2,2-diphenylethenyl)-N,N-bis(4-methylphenyl)-benzenamine (TPA) was prepared and its anisotropic hole-transport property measured. First, the hole-transport property of the TPA was investigated based on its chemical structure and electrochemical redox characteristics. Next, a large-scale single crystal formation at a high rate was developed by employing a solution method based on its solubility and supersolubility curves. The grown TPA was found to be a single crystal based on the polarization micrograph observation and crystallographic analysis. For the TPA single crystal, an anisotropic surface conduction was found, which was well explained by its molecular stack structure. The measured current in the long-axis direction is one order of magnitude greater than that of amorphous TPA.

  1. Large-mode-area hybrid photonic crystal fiber amplifier at 1178 nm

    DEFF Research Database (Denmark)

    Petersen, Sidsel Rübner; Chen, Mingchen; Shirakawa, Akira

    2015-01-01

    Amplification of 1178 nm light is demonstrated in a large-mode-area single-mode ytterbium-doped hybrid photonic crystal fiber, relying on distributed spectral filtering of spontaneous emission at shorter wavelengths. An output power of 53 W is achieved with 29 dB suppression of parasitic lasing...

  2. Neutron macromolecular crystallography at the FRM IIThe neutron single crystal diffractometer BIODIFF

    OpenAIRE

    Ostermann, Andreas; Schrader, Tobias Erich; Monkenbusch, Michael; Laatsch, Bernhard; Jüttner, Philipp; Petry, Winfried; Richter, Dieter

    2015-01-01

    The research reactor Heinz Maier-Leibnitz (FRM II) is a modern high flux neutron source which feeds at the present 27 state of the art instruments. The newly build neutron single crystal diffractometer BIODIFF is especially designed to collect data from crystals with large unit cells. The main field of application is the structure analysis of proteins, especially the determination of hydrogen atom positions. BIODIFF is a joint project of the Forschungszentrum Jülich (FZJ/JCNS) and the Forschu...

  3. Single Crystal DMs for Space-Based Observatories

    Science.gov (United States)

    Bierden, Paul

    We propose to demonstrate the feasibility of a new manufacturing process for large aperture, high-actuator count microelectromechanical deformable mirrors (MEMS-DMs). These DMs are designed to fill a critical technology gap in NASA s plan for high- contrast space-based exoplanet observatories. We will manufacture a prototype DM with a continuous mirror facesheet, having an active aperture of 50mm diameter, supported by 2040 electrostatic actuators (50 across the diameter of the active aperture), spaced at a pitch of 1mm. The DM will be manufactured using silicon microfabrication tools. The strategic motivation for the proposed project is to advance MEMS DMs as an enabling technology in NASA s rapidly emerging program for extrasolar planet exploration. That goal is supported by an Astro2010 white paper on Technologies for Direct Optical Imaging of Exoplanets, which concluded that DMs are a critical component for all proposed internal coronagraph instrument concepts. That white paper pointed to great strides made by DM developers in the past decade, and acknowledged the components made by Boston Micromachines Corporation to be the most notable MEMS-based technology option. The principal manufacturing innovation in this project will be assembly of the DM through fusion bonding of three separate single crystal silicon wafers comprising the device s substrate, actuator array, and facesheet. The most significant challenge of this project will be to develop processes that allow reliable fusion bonds between multiple compliant silicon layers while yielding an optically flat surface and a robust electromechanical system. The compliance of the DM, which is required for its electromechanical function, will make it challenging to achieve the intimate, planar contact that is generally needed for success in fusion bonding. The manufacturing approach will use photolithography and reactive ion etching to pattern structural layers. Three wafer-scale devices will be patterned and

  4. Growth and high pressure studies of zirconium sulphoselenide single crystals

    Indian Academy of Sciences (India)

    K R Patel; R D Vaidya; M S Dave; S G Patel

    2009-11-01

    Transition metal trichalcogenides are well suited for extreme pressure lubrication. These materials being semiconducting and of layered structure may undergo structural and electronic transition under pressure. In this paper authors reported the details about synthesis and characterization of zirconium sulphoselenide single crystals. The chemical vapour transport technique was used for the growth of zirconium sulphoselenide single crystals. The energy dispersive analysis by X-ray (EDAX) gave the confirmation about the stoichiometry of the as-grown crystals and other structural characterizations were accomplished by X-ray diffraction (XRD) study. The variation of electrical resistance was monitored in a Bridgman opposed anvil set-up up to 8 GPa pressure to identify the occurrence of any structural transition. These crystals do not possess any structural transitions upto the pressure limit examined.

  5. Geometric constraints on phase coexistence in vanadium dioxide single crystals

    Science.gov (United States)

    McGahan, Christina; Gamage, Sampath; Liang, Jiran; Cross, Brendan; Marvel, Robert E.; Haglund, Richard F.; Abate, Yohannes

    2017-02-01

    The appearance of stripe phases is a characteristic signature of strongly correlated quantum materials, and its origin in phase-changing materials has only recently been recognized as the result of the delicate balance between atomic and mesoscopic materials properties. A vanadium dioxide (VO2) single crystal is one such strongly correlated material with stripe phases. Infrared nano-imaging on low-aspect-ratio, single-crystal VO2 microbeams decorated with resonant plasmonic nanoantennas reveals a novel herringbone pattern of coexisting metallic and insulating domains intercepted and altered by ferroelastic domains, unlike previous reports on high-aspect-ratio VO2 crystals where the coexisting metal/insulator domains appear as alternating stripe phases perpendicular to the growth axis. The metallic domains nucleate below the crystal surface and grow towards the surface with increasing temperature as suggested by the near-field plasmonic response of the gold nanorod antennas.

  6. Single-Crystal Structure of a Covalent Organic Framework

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, YB; Su, J; Furukawa, H; Yun, YF; Gandara, F; Duong, A; Zou, XD; Yaghi, OM

    2013-11-06

    The crystal structure of a new covalent organic framework, termed COF-320, is determined by single-crystal 3D electron diffraction using the rotation electron diffraction (RED) method for data collection. The COF crystals are prepared by an imine condensation of tetra-(4-anilyl)methane and 4,4'-biphenyldialdehyde in 1,4-dioxane at 120 degrees C to produce a highly porous 9-fold interwoven diamond net. COF-320 exhibits permanent porosity with a Langmuir surface area of 2400 m(2)/g and a methane total uptake of 15.0 wt % (176 cm(3)/cm(3)) at 25 degrees C and 80 bar. The successful determination of the structure of COF-320 directly from single-crystal samples is an important advance in the development of COF chemistry.

  7. Geometric constraints on phase coexistence in vanadium dioxide single crystals.

    Science.gov (United States)

    McGahan, Christina; Gamage, Sampath; Liang, Jiran; Cross, Brendan; Marvel, Robert E; Haglund, Richard F; Abate, Yohannes

    2017-02-24

    The appearance of stripe phases is a characteristic signature of strongly correlated quantum materials, and its origin in phase-changing materials has only recently been recognized as the result of the delicate balance between atomic and mesoscopic materials properties. A vanadium dioxide (VO2) single crystal is one such strongly correlated material with stripe phases. Infrared nano-imaging on low-aspect-ratio, single-crystal VO2 microbeams decorated with resonant plasmonic nanoantennas reveals a novel herringbone pattern of coexisting metallic and insulating domains intercepted and altered by ferroelastic domains, unlike previous reports on high-aspect-ratio VO2 crystals where the coexisting metal/insulator domains appear as alternating stripe phases perpendicular to the growth axis. The metallic domains nucleate below the crystal surface and grow towards the surface with increasing temperature as suggested by the near-field plasmonic response of the gold nanorod antennas.

  8. Modelling of Heat Transfer in Single Crystal Growth

    CERN Document Server

    Zhmakin, Alexander I

    2014-01-01

    An attempt is made to review the heat transfer and the related problems encountered in the simulation of single crystal growth. The peculiarities of conductive, convective and radiative heat transfer in the different melt, solution, and vapour growth methods are discussed. The importance of the adequate description of the optical crystal properties (semitransparency, specular reflecting surfaces) and their effect on the heat transfer is stresses. Treatment of the unknown phase boundary fluid/crystal as well as problems related to the assessment of the quality of the grown crystals (composition, thermal stresses, point defects, disclocations etc.) and their coupling to the heat transfer/fluid flow problems is considered. Differences between the crystal growth simulation codes intended for the research and for the industrial applications are indicated. The problems of the code verification and validation are discussed; a brief review of the experimental techniques for the study of heat transfer and flow structu...

  9. Perovskite single crystals and thin films for optoelectronic devices (Conference Presentation)

    Science.gov (United States)

    Li, Gang; Han, Qifeng; Yang, Yang; Bae, Sang-Hoon; Sun, Pengyu

    2016-09-01

    Hybrid organolead trihalide perovskite (OTP) solar cells have developed as a promising candidate in photovoltaics due to their excellent properties including a direct bandgap, strong absorption coefficient, long carrier lifetime, and high mobility. Most recently, formamidinium (NH2CH=NH2+ or FA) lead iodide (FAPbI3) has attracted significant attention due to several advantages: (1) the larger organic FA cation can replace the MA cation and form a more symmetric crystal structure, (2) the smaller bandgap of FAPbI3 allows for near infrared (NIR) absorption, and (3) FAPbI3 has an elevated decomposition temperature and thus potential to improve stability. Single crystals provide an excellent model system to study the intrinsic electrical and optical properties of these materials due to their high purity, which is particularly important to understand the limits of these materials. In this work, we report the growth of large ( 5 millimeter size) single crystal FAPbI3 using a novel liquid based crystallization method. The single crystal FAPbI3 demonstrated a δ-phase to α-phase transition with a color change from yellow to black when heated to 185°C within approximately two minutes. The crystal structures of the two phases were identified and the PL emission peak of the α-phase FAPbI3 (820 nm) shows clear red-shift compared to the FAPbI3 thin film (805 nm). The FAPbI3 single crystal shows a long carrier lifetime of 484 ns, a high carrier mobility of 4.4 cm2·V-1·s-1, and even more interestingly a conductivity of 1.1 × 10-7(ohm·cm)-1, which is approximately one order of magnitude higher than that of the MAPbI3 single crystal. Finally, high performance photoconductivity type photodetectors were successfully demonstrated using the single crystal FAPbI3.

  10. Crystallization in Emulsions: A Thermo-Optical Method to Determine Single Crystallization Events in Droplet Clusters

    Directory of Open Access Journals (Sweden)

    Serghei Abramov

    2016-08-01

    Full Text Available Delivery systems with a solid dispersed phase can be produced in a melt emulsification process. For this, dispersed particles are melted, disrupted, and crystallized in a liquid continuous phase (melt emulsification. Different to bulk crystallization, droplets in oil-in-water emulsions show individual crystallization behavior, which differs from droplet to droplet. Therefore, emulsion droplets may form liquid, amorphous, and crystalline structures during the crystallization process. The resulting particle size, shape, and physical state influence the application properties of these colloidal systems and have to be known in formulation research. To characterize crystallization behavior of single droplets in micro emulsions (range 1 µm to several hundred µm, a direct thermo-optical method was developed. It allows simultaneous determination of size, size distribution, and morphology of single droplets within droplet clusters. As it is also possible to differentiate between liquid, amorphous, and crystalline structures, we introduce a crystallization index, CIi, in dispersions with a crystalline dispersed phase. Application of the thermo-optical approach on hexadecane-in-water model emulsion showed the ability of the method to detect single crystallization events of droplets within emulsion clusters, providing detailed information about crystallization processes in dispersions.

  11. High-quality bulk hybrid perovskite single crystals within minutes by inverse temperature crystallization

    OpenAIRE

    Saidaminov, Makhsud I.; Abdelhady, Ahmed L.; Murali, Banavoth; Alarousu, Erkki; Burlakov, Victor M.; Peng, Wei; Dursun, Ibrahim; Wang, Lingfei; He, Yao; Maculan, Giacomo; Goriely, Alain; Wu, Tom; Mohammed, Omar F.; Bakr, Osman M.

    2015-01-01

    Single crystals of methylammonium lead trihalide perovskites (MAPbX3; MA=CH3NH3 +, X=Br− or I−) have shown remarkably low trap density and charge transport properties; however, growth of such high-quality semiconductors is a time-consuming process. Here we present a rapid crystal growth process to obtain MAPbX3 single crystals, an order of magnitude faster than previous reports. The process is based on our observation of the substantial decrease of MAPbX3 solubility, in certain solvents, at e...

  12. The influence of orientation on the stress rupture properties of nickel-base superalloy single crystals

    Science.gov (United States)

    Mackay, Rebecca A.; Maier, Ralph D.

    1982-10-01

    The influence of orientation on the stress rapture properties of MAR-M247 single crystals was studied. Stress rupture tests were performed at 724 MPa and 774 °C where the effect of anisotropy is prominent. The mechanical behavior of the single crystals was rationalized on the basis of the Schmid factors for the operative slip systems and the lattice rotations which the crystals underwent during deformation. The stress rupture lives at 774 °C were found to be greatly influenced by the lattice rotations required to produce intersecting slip, because second-stage creep does not begin until after the onset of intersecting slip. Crystals which required large rotations to become oriented for intersecting slip exhibited a large primary creep strain, a large effective stress level at the onset of steady-state creep, and consequently, a short stress rupture life. Those crystals having orientations within about 25° of the [001] exhibited significantly longer lives when their orientations were closer to the [001]-[011] boundary of the stereographic triangle than to the [001]-[1l 1] boundary, because they required smaller rotations to produce intersecting slip and the onset of second-stage creep. Thus, the direction off the [001], as well as the number of degrees off the [001], has a major influence on the stress rapture lives of single crystals in this temperature regime.

  13. Synthesis, crystal growth and mechanical properties of Bismuth Silicon Oxide (BSO) single crystal

    Energy Technology Data Exchange (ETDEWEB)

    Riscob, B. [CSIR – National Physical Laboratory, Crystal Growth and X-ray Analysis, New Delhi 110 012 (India); Institute for Plasma Research, Bhat, Gandhinagar 382428, Gujarat (India); Shkir, Mohd. [CSIR – National Physical Laboratory, Crystal Growth and X-ray Analysis, New Delhi 110 012 (India); Ganesh, V. [Department of Physics, Kakatiya University, Warangal 506 009 (India); Vijayan, N.; Maurya, K.K. [CSIR – National Physical Laboratory, Crystal Growth and X-ray Analysis, New Delhi 110 012 (India); Kishan Rao, K. [Department of Physics, Kakatiya University, Warangal 506 009 (India); Bhagavannarayana, G., E-mail: bhagavan@mail.nplindia.ernet.in [CSIR – National Physical Laboratory, Crystal Growth and X-ray Analysis, New Delhi 110 012 (India)

    2014-03-05

    Highlights: • Synthesis of Bismuth Silicon Oxide (BSO). • Single crystal growth of BSO by Czochralski (Cz) method. • Complete mechanical analysis by device fabrication point of view. • Theoretical and experimental calculations of mechanical properties. -- Abstract: Bismuth Silicon Oxide (BSO) is an efficient material for piezo-electric and electro-optic applications. In this article, growth of BSO single crystal by high temperature Czochralski melt growth technique and its detailed mechanical characterization by Vickers microhardness, fracture toughness, crack propagation, brittleness index and yield strength have been reported. The raw material was synthesized by solid state reaction using the stoichiometric ratio of high purity bismuth tri-oxide and silicon di-oxide. The synthesized material was charged in the platinum crucible and then melted. The required rotation and pulling rate was optimized for BSO single crystal growth and good quality single crystal has been harvested after a time span of 5 days. Powder X-ray diffraction analysis confirms the parent crystallization phase of BSO. The experimentally studied mechanical behavior of the crystal is explained using various theoretical models. The anisotropic nature of the crystals is studied using Knoop indentation technique.

  14. Diffusion of CO2 in Large Crystals of Cu-BTC MOF.

    Science.gov (United States)

    Tovar, Trenton M; Zhao, Junjie; Nunn, William T; Barton, Heather F; Peterson, Gregory W; Parsons, Gregory N; LeVan, M Douglas

    2016-09-14

    Carbon dioxide adsorption in metal-organic frameworks has been widely studied for applications in carbon capture and sequestration. A critical component that has been largely overlooked is the measurement of diffusion rates. This paper describes a new reproducible procedure to synthesize millimeter-scale Cu-BTC single crystals using concentrated reactants and an acetic acid modulator. Microscopic images, X-ray diffraction patterns, Brunauer-Emmett-Teller surface areas, and thermogravimetric analysis results all confirm the high quality of these Cu-BTC single crystals. The large crystal size aids in the accurate measurement of micropore diffusion coefficients. Concentration-swing frequency response performed at varying gas-phase concentrations gives diffusion coefficients that show very little dependence on the loading up to pressures of 0.1 bar. The measured micropore diffusion coefficient for CO2 in Cu-BTC is 1.7 × 10(-9) m(2)/s.

  15. Skylab experiments on semiconductors and alkali halides. [single crystal growth

    Science.gov (United States)

    Lundquist, C. A.

    1974-01-01

    The space processing experiments performed during the Skylab missions included one on single crystal growth of germanium selenide and telluride, one on pure and doped germanium crystals, two on pure and doped indium antimonide, one on gallium-indium-antimony systems, and one on a sodium chloride-sodium fluoride eutectic. In each experiment, three ampoules of sample were processed in the multipurpose electric furnace within the Skylab Materials Processing Facility. All were successful in varying degrees and gave important information about crystal growth removed from the effects of earth surface gravity.

  16. Is the methanation reaction over Ru single crystals structure dependent?

    DEFF Research Database (Denmark)

    Vendelbo, Søren Bastholm; Johansson, Martin; Nielsen, Jane Hvolbæk;

    2011-01-01

    The influence of monoatomic steps and defects on the methanation reaction over ruthenium has been investigated. The experiments are performed on a Ru(0 1 54) ruthenium single crystal, which contains one monoatomic step atom for each 27 terrace atoms. The methanation activity is measured at one ba...... front-side of the crystal is poisoned faster than the entire crystal containing more defects. We also observe that additional sputtering of the well-defined front-side increases the reactivity measured on the surface. Based on this, we conclude that the methanation reaction takes place...

  17. Single Crystal Growth of Zirconia Utilizing a Skull Melting Technique,

    Science.gov (United States)

    1979-08-01

    help eliminate many crystal growth problems. The flame-fusion apparatus was invented by A. Verneuil 3 over 75 years ago and has been used for growth of...AOAO2 23 OMEAIRDEVLOPENT CNT RI RIFISS AFB NY F /S .7/ NGLE CRYSTAL GROWTH OF Z RONA UT IXZIN A SKULL MELTING TE-SCUl AUG 79 A C MARSHALL, J A ADAMSK...Crucible-less synthesis 50. ABSTRACT (Ceefiw.. - eooe edi. ,.e.eimwd identiby Slek ~b.,) Investigation into the growth of single crystal materials are

  18. Single Crystal Synthesis and STM Studies of High Temperature Superconductors

    Science.gov (United States)

    Barrientos, Alfonso

    1997-01-01

    This is a final report for the work initiated in September of 1994 under the grant NAG8-1085 - NASA/OMU, on the fabrication of bulk and single crystal synthesis, specific heat measuring and STM studies of high temperature superconductors. Efforts were made to fabricate bulk and single crystals of mercury based superconducting material. A systematic thermal analysis on the precursors for the corresponding oxides and carbonates were carried out to synthesized bulk samples. Bulk material was used as seed in an attempt to grow single crystals by a two-step self flux process. On the other hand bulk samples were characterized by x-ray diffraction, electrical resistivity and magnetic susceptibility, We studied the specific heat behavior in the range from 80 to 300 K. Some preliminary attempts were made to study the atomic morphology of our samples. As part of our efforts we built an ac susceptibility apparatus for measuring the transition temperature of our sintered samples.

  19. Heterogeneous Monolithic Integration of Single-Crystal Organic Materials.

    Science.gov (United States)

    Park, Kyung Sun; Baek, Jangmi; Park, Yoonkyung; Lee, Lynn; Hyon, Jinho; Koo Lee, Yong-Eun; Shrestha, Nabeen K; Kang, Youngjong; Sung, Myung Mo

    2017-02-01

    Manufacturing high-performance organic electronic circuits requires the effective heterogeneous integration of different nanoscale organic materials with uniform morphology and high crystallinity in a desired arrangement. In particular, the development of high-performance organic electronic and optoelectronic devices relies on high-quality single crystals that show optimal intrinsic charge-transport properties and electrical performance. Moreover, the heterogeneous integration of organic materials on a single substrate in a monolithic way is highly demanded for the production of fundamental organic electronic components as well as complex integrated circuits. Many of the various methods that have been designed to pattern multiple heterogeneous organic materials on a substrate and the heterogeneous integration of organic single crystals with their crystal growth are described here. Critical issues that have been encountered in the development of high-performance organic integrated electronics are also addressed.

  20. Surface enhanced raman spectroscopy studies on triglycine sulphate single crystals

    Science.gov (United States)

    Parameswari, A.; Mohamed Asath, R.; Premkumar, R.; Milton Franklin Benial, A.

    2017-01-01

    Adsorption characteristics of triglycine sulphate (TGS) on silver (Ag) surface were investigated based on density functional theory calculations and surface enhanced Raman spectroscopy (SERS) technique. The single crystals of TGS were grown by slow evaporation method. Ag nanoparticles (Ag NPs) were prepared by solution combustion method and characterized. The calculated and observed structural parameters of TGS molecule were compared. Raman and SERS spectra for TGS single crystal were studied experimentally and validated theoretically. Frontier molecular orbitals (FMOs) analysis was carried out for TGS and TGS adsorbed on Ag surface. The second harmonic generation measurements confirm the nonlinear optical (NLO) activity of the TGS molecule. SERS spectral analysis reveals that the TGS adsorbed as tilted orientation on the silver surface. The theoretical and experimental results evidence the suitability of the grown TGS single crystal for optoelectronic applications.

  1. Single crystal surface structure by bragg scattering

    DEFF Research Database (Denmark)

    Nielsen, Mogens

    1985-01-01

    X-ray diffraction is becoming an important tool in the measurements of surface structures. Single crystalline samples are used as in Low Energy Electron Diffraction (LEED)-studies. The X-ray technique is somewhat more involved due to the need of bright, collimated photon sources, in general...... synchrotron X-rays, and of very accurate angular settings in the ultrahigh-vacuum environment of the sample. We present the technique and discuss examples of experimental results....

  2. Crystal growth and characterization of new semiorganic nonlinear optical single crystals

    Science.gov (United States)

    Kulshrestha, Shobha; Shrivastava, A. K.

    2016-05-01

    An organic material of a L-histidine monohydrochloride single crystal was grown in a distilled water solution using the slow evaporation method at 40-45°C. The grown crystal was transparent and colourless, with a size of about 20 × 9 × 5 mm3, obtained within a period of 21 days. The solubility of grown crystals have found out at various temperatures. The UV-visible transmittance studies show that the grown crystals have wide optical transparency in the entire visible region It is observed that the crystal has transparency window from 255nm to 700nm and its energy gap (Eg) found to be is 3.1eV. The grown crystal was subjected to powder X-ray diffraction analysis, confirming that the orthorhombic crystalline nature of the crystal. To identify the surface morphology, the as grown crystal was subjected to FE-SEM technique. The chemical composition of the grown crystal was estimated by Energy dispersive X-ray analysis. The optical behaviour of the grown crystal was analyzed by PL study.

  3. Modeling of elastic and plastic waves for HCP single crystals in a 3D formulation based on zinc single crystal

    Science.gov (United States)

    Krivosheina, Marina; Kobenko, Sergey; Tuch, Elena; Kozlova, Maria

    2016-11-01

    This paper investigates elastic and plastic waves in HCP single crystals through the numerical simulation of strain processes in anisotropic materials based on a zinc single crystal. Velocity profiles for compression waves in the back surfaces of single-crystal zinc plates with impact loading oriented in 0001 and 10 1 ¯0 are presented in this work as a part of results obtained in numerical simulations. The mathematical model implemented in this study reflects the following characteristics of the mechanical properties inherent in anisotropic (transtropic) materials: varying degree of anisotropy of elastic and plastic properties, which includes reverse anisotropy, dependence of distribution of all types of waves on the velocity orientation, and the anisotropy of compressibility. Another feature of elastic and plastic waves in HCP single crystals is that the shock wave does not split into an elastic precursor and "plastic" compression shock wave, which is inherent in zinc single crystals with loading oriented in 0001. The study compares numerical results obtained in a three-dimensional formulation with the results of velocity profiles from the back surfaces of target plates obtained in real experiments. These results demonstrate that the mathematical model is capable of describing the properties of the above-mentioned anisotropic (transtropic) materials.

  4. Low cost, single crystal-like substrates for practical, high efficiency solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Goyal, A.; Specht, E.D.; List, F.A. [and others

    1997-09-01

    It is well established that high efficiency (20%) solar cells can be routinely fabricated using single crystal photovoltaic (PV) materials with low defect densities. Polycrystalline materials with small grain sizes and no crystallographic texture typically result in reduced efficiences. This has been ascribed primarily to the presence of grain boundaries and their effect on recombination processes. Furthermore, lack of crystallographic texture can result in a large variation in dopant concentrations which critically control the electronic properties of the material. Hence in order to reproducibly fabricate high efficiency solar cells a method which results in near single crystal material is desirable. Bulk single crystal growth of PV materials is cumbersome, expensive and difficult to scale up. We present here a possible route to achieve this if epitaxial growth of photovoltaic materials on rolling-assisted-biaxially textured-substrates (RABiTS) can be achieved. The RABiTS process uses well-established, industrially scaleable, thermomechanical processing to produce a biaxially textured or single-crystal-like metal substrate with large grains (50-100 {mu}m). This is followed by epitaxial growth of suitable buffer layers to yield chemically and structurally compatible surfaces for epitaxial growth of device materials. Using the RABiTS process it should be possible to economically fabricate single-crystal-like substrates of desired sizes. Epitaxial growth of photovoltaic devices on such substrates presents a possible route to obtaining low-cost, high performance solar cells.

  5. Study of a large NaI(Tl) crystal

    Energy Technology Data Exchange (ETDEWEB)

    Aguilar-Arevalo, A. [TRIUMF, 4004 Wesbrook Mall, Vancouver, B.C., V6T 2A3 (Canada); Aoki, M. [Physics Department, Osaka University, Toyonaka, Osaka 560-0043 (Japan); Blecher, M. [Physics Department, Virginia Tech., Blacksburg, VA 24061 (United States); Bryman, D.A. [Department of Physics and Astronomy, University of British Columbia, Vancouver, B.C., V6T 1Z1 (Canada); Doria, L., E-mail: luca@triumf.c [TRIUMF, 4004 Wesbrook Mall, Vancouver, B.C., V6T 2A3 (Canada); Gumplinger, P. [TRIUMF, 4004 Wesbrook Mall, Vancouver, B.C., V6T 2A3 (Canada); Hussein, A. [University of Northern British Columbia, Prince George, B.C., V2N 4Z9 (Canada); Ito, N. [Physics Department, Osaka University, Toyonaka, Osaka 560-0043 (Japan); Kettell, S. [Brookhaven National Laboratory, Upton, NY 11973-5000 (United States); Kurchaninov, L. [TRIUMF, 4004 Wesbrook Mall, Vancouver, B.C., V6T 2A3 (Canada); Littenberg, L. [Brookhaven National Laboratory, Upton, NY 11973-5000 (United States); Malbrunot, C. [Department of Physics and Astronomy, University of British Columbia, Vancouver, B.C., V6T 1Z1 (Canada); Marshall, G.M. [TRIUMF, 4004 Wesbrook Mall, Vancouver, B.C., V6T 2A3 (Canada); Numao, T., E-mail: toshio@triumf.c [TRIUMF, 4004 Wesbrook Mall, Vancouver, B.C., V6T 2A3 (Canada); Poutissou, R.; Sher, A. [TRIUMF, 4004 Wesbrook Mall, Vancouver, B.C., V6T 2A3 (Canada); Yamada, K. [Physics Department, Osaka University, Toyonaka, Osaka 560-0043 (Japan)

    2010-09-21

    Using a narrow band positron beam, the response of a large high-resolution NaI(Tl) crystal to an incident positron beam was measured. It was found that nuclear interactions cause the appearance of additional peaks in the low energy tail of the deposited energy spectrum.

  6. Aluminum-rich mesoporous MFI - type zeolite single crystals

    DEFF Research Database (Denmark)

    Kustova, Marina; Kustov, Arkadii; Christensen, Christina Hviid

    2005-01-01

    . With this technique, only zeolites with relatively low Al contents were reported (Si/Al ratio about 100). In this work, the preparation of aluminum-rich mesoporous MFI-type zeolite single crystals (Si/Al similar to 16-50) using aluminum isopropoxide as the aluminum Source is reported for the first time. All samples......Zeolitcs are crystalline materials, which are widely used as solid acid catalysts and supports in many industrial processes. Recently, mesoporous MFI-type zeolite single crystals were synthesized by use of carbon particles as a mesopore template and sodium aluminate as the aluminum Source...

  7. Apparatus And Method For Producing Single Crystal Metallic Objects

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Shyh-Chin (Latham, NY); Gigliotti, Jr., Michael Francis X. (Scotia, NY); Rutkowski, Stephen Francis (Duanesburg, NY); Petterson, Roger John (Fultonville, NY); Svec, Paul Steven (Scotia, NY)

    2006-03-14

    A mold is provided for enabling casting of single crystal metallic articles including a part-defining cavity, a sorter passage positioned vertically beneath and in fluid communication with the part-defining cavity, and a seed cavity positioned vertically beneath and in fluid communication with the sorter passage. The sorter passage includes a shape suitable for encouraging a single crystal structure in solidifying molten metal. Additionally, a portion of the mold between the sorter passage and the part-defining cavity includes a notch for facilitating breakage of a cast article proximate the notch during thermal stress build-up, so as to prevent mold breakage or the inclusion of part defects.

  8. Growth of Solid Solution Single Crystals

    Science.gov (United States)

    Lehoczky, Sandor L.; Szofran, F. R.; Gillies, Donald C.

    2001-01-01

    The solidification of a solid solution semiconductor, having a wide separation between liquidus and solidus has been extensively studied in ground based, high magnetic field and Spacelab experiments. Two alloys of mercury cadmium telluride have been studied; with 80.0 mole percent of HgTe and 84.8 mole percent of HgTe respectively, the remainder being cadmium telluride. Such alloys are extremely difficult to grow by directional solidification on earth due to high solutal and thermal density differences that give rise to fluid flow and consequent loss of interface shape and composition. Diffusion controlled growth is therefore impossible to achieve in conventional directional solidification. The ground based experiments consisted of growing crystals in several different configurations of heat pipe furnaces, NASA's Advanced Automated Directional Solidification Furnace (AADSF), and a similar furnace incorporated in a superconducting magnet capable of operating at up to 5T. The first microgravity experiment took place during the flight of STS-62 in March 1994, with the AADSF installed on the second United States Microgravity Payload (USMP-2). The alloy was solidified at 3/4 inch per day over a 9 day period, and for the first time a detailed evaluation was performed correlating composition variations to measured residual acceleration. The second flight experiment took place in the fourth United States Microgravity Payload Mission (USMP-4) in November 1997. Due to contamination of the furnace system, analysis shows that the conditions prevailing during the experiment were quite different from the requirements requested prior to the mission. The results indicate that the sample did accomplish the desired objectives.

  9. Role of crystal orientation on chemical mechanical polishing of single crystal copper

    Science.gov (United States)

    Zhu, Aibin; He, Dayong; Luo, Wencheng; Liu, Yangyang

    2016-11-01

    The material removal mechanism of single crystal copper in chemical mechanical polishing (CMP) has not been intensively investigated. And the role of crystal orientation in CMP of single crystal cooper is not quite clear yet. Quasi-continuum method was adopted in this paper to simulate the process of nano-particles grinding on single crystal copper in CMP process. Three different crystal orientations, i.e. x[100]y[001], x[001]y[110] and x[-211]y[111], were chosen for analysis. The atom displacement diagrams, stress distribution diagrams and load-displacement curves were obtained. After analyzing the deformation mechanism, residual stress of the work piece material and cutting force, results showed that, the crystal orientation of work piece has great influence on the deformation characteristics and surface quality of work piece during polishing. In the A(001)[100] orientation, the residual stress distribution after polishing is deeper, and the stress is larger than that in the B(110)[001] and C(111)[-211] orientations. And the average tangential cutting force in the A(001)[100] orientation is much larger than those in the other two crystal orientation. This research is helpful to revealing the material removal mechanism of CMP process.

  10. Rapid growth of a large-scale(600 mm aperture) KDP crystal and its optical quality

    Institute of Scientific and Technical Information of China (English)

    Guohui; Li; Guozong; Zheng; Yingkun; Qi; Peixiu; Yin; En; Tang; Fei; Li; Jing; Xu; Taiming; Lei; Xiuqin; Lin; Min; Zhang; Junye; Lu; Jinbo; Ma; Youping; He; Yuangen; Yao

    2014-01-01

    Potassium dihydrogen phosphate(KDP) single crystals are the only nonlinear crystals currently used for electro-optic switches and frequency converters in inertial confinement fusion research, due to their large dimension and exclusive physical properties. Based on the traditional solution-growth process, large bulk KDP crystals, usually with sizes up to600 × 600 mm2 so as to make a frequency doubler for the facility requirement loading highly flux of power laser, can be grown in standard Holden-type crystallizers, without spontaneous nucleation and visible defects, one to two orders of magnitude faster than by conventional methods. Pure water and KDP raw material with a few ion impurities such as Fe,Cr, and Al(less than 0.1 ppm) were used. The rapid-growth method includes extreme conditions such as temperature range from 60 to 35℃ , overcooling up to 5℃ , growth rates exceeding 10 mm/day, and crystal size up to 600 mm. The optical parameters of KDP crystals were determined. The optical properties of crystals determined indicate that they are of favorable quality for application in the facility.

  11. Growth and characterization of morpholinium dihydrogenphosphate single crystal

    Science.gov (United States)

    Babu, D. Rajan; Arul, H.; Vizhi, R. Ezhil

    2016-10-01

    Morpholinium dihydrogenphosphate (MDP) single crystals were synthesized, and were subsequently grown by controlled evaporation technique at room temperature for nonlinear optical applications. The grown crystal, which belongs to the monoclinic system with the space group P21, was subjected to single crystal X-ray diffraction to confirm the structure. UV-vis-NIR spectroscopy was done on the grown crystal and it showed good optical transparency in the entire visible region with a minimum cut-off wavelength of 289 nm. The optical band gap was computed as a function of photon energy using Tauc's plot. The refractive index of the grown crystal was determined using a Metricon Prism Coupler. The thermogravimetric (TG) and differential thermal analysis (DTA) traces disclosed the thermal stability of the compound. The mechanical strength of the crystal was investigated by a Vickers microhardness tester. Dielectric constant and dielectric loss were calculated and plotted as a function of frequency at different temperatures. The second harmonic conversion efficiency was determined using the Kurtz-Perry powder technique, and the efficiency was found to be 1.2 times greater than that of standard KDP.

  12. Scintillation properties of solution-grown trans-stilbene single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Zaitseva, Natalia, E-mail: zaitseva1@llnl.gov [Lawrence Livermore National Laboratory, 7000 East Avenue, Livermore, CA 94551 (United States); Glenn, Andrew; Carman, Leslie; Paul Martinez, H.; Hatarik, Robert [Lawrence Livermore National Laboratory, 7000 East Avenue, Livermore, CA 94551 (United States); Klapper, Helmut [Institut für Kristallographie, Jägerstraße 17-19, D-52066 Aachen (Germany); Payne, Stephen [Lawrence Livermore National Laboratory, 7000 East Avenue, Livermore, CA 94551 (United States)

    2015-07-21

    The scintillation properties of trans-stilbene crystals grown for the first time by application of the solution growth technique to the scale of 10 cm are reported. Measurements of the scintillation light output, pulse shape discrimination, and neutron detection efficiency were made with sets of crystals cut as 50 cm diameter cylinders of different lengths from 0.3 to 10 cm. Comparison to liquid scintillators and traditional melt-grown stilbene showed that at increasing sizes new solution-grown crystals exhibit better scintillation performance that makes them promising for use in large scale neutron detectors. Results are discussed in relation to structural imperfections attributed to different methods of growth. - Highlights: • 10-cm-scale trans-stilbene single crystals grown from organic solutions. • Crystals have high optical quality required for fast neutron detection. • Scintillation performance superior to liquids and melt-grown stilbene demonstrated.

  13. Studies on growth, crystal structure and characterization of novel organic nicotinium trifluoroacetate single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Dhanaraj, P.V. [Centre for Crystal Growth, SSN College of Engineering, Kalavakkam 603 110 (India); Rajesh, N.P., E-mail: rajeshnp@hotmail.com [Centre for Crystal Growth, SSN College of Engineering, Kalavakkam 603 110 (India); Sundar, J. Kalyana; Natarajan, S. [Department of Physics, Madurai Kamaraj University, Madurai 625 021 (India); Vinitha, G. [Department of Physics, Crescent Engineering College, Chennai 600 048 (India)

    2011-09-15

    Highlights: {yields} Good quality crystals of nicotinium trifluoroacetate in monoclinic system were grown for first time. {yields} Nicotinium trifluoroacetate crystal exhibits third order nonlinear optical properties. {yields} The optical spectrum of nicotinium trifluoroacetate crystal reveals the wide transmission in the entire range with cutoff wavelength at 286 nm. {yields} Nicotinium trifluoroacetate is a low dielectric constant material. - Abstract: An organic material, nicotinium trifluoroacetate (NTF) was synthesized and single crystals in monoclinic system were grown from aqueous solution for the first time. Its solubility and metastable zone width were estimated. The crystal structure of NTF was analyzed to reveal the molecular arrangements and the formation of hydrogen bonds in the crystal. High-resolution X-ray diffraction rocking curve measurements were performed to analyze the structural perfection of the grown crystals. Functional groups in NTF were identified by Fourier transform infrared spectral analysis. Thermal behaviour and stability of NTF were studied by thermogravimetric and differential thermal analysis and differential scanning calorimetry. Mechanical and dielectric properties of NTF crystals were analyzed. Optical studies reveal that NTF crystals are transparent in the wavelength range 286-1100 nm. The third order nonlinear optical parameters of NTF were derived by the Z-scan technique.

  14. Cascading nonlinearities in an organic single crystal core fiber: The Cerenkov regime

    NARCIS (Netherlands)

    Torruellas, William E.; Krijnen, Gijs; Kim, Dug Y.; Schiek, Roland; Stegeman, George J.; Vidakovic, Petar; Zyss, Joseph

    1994-01-01

    The large nonlinear phase shifts imparted to the fundamental beam during Cerenkov second harmonic generation (SHG) in a DAN, 4-(N,N-dimethylamino)-3-acetamidonitrobenzene, single crystal core fiber are explained and modelled numerically. Cascading upconversion and downconversion processes leads to n

  15. Decrease of bulk pinning strength in deoxygenated YBCO single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Moreno, A.J.; Bekeris, V. [Buenos Aires Univ. (Argentina). Lab. de Bajas Temperaturas

    2000-07-01

    We measured the first and third harmonics of the complex AC susceptibility in YBCO single crystals with different oxygen contents (6.5 {<=} x {<=} 7). The amplitude of the AC field was varied in presence of an external dc field both applied parallel to the c-axis of the crystals. We give evidence that deoxygenation leads to a reduction of the bulk pinning strength and consequently to a stronger contribution of geometrical barriers. These results support the recently reported investigations showing that deoxygenation makes the YBCO crystals more anisotropic reducing the effective bulk pinning for quasi two-dimensional vortices. We also show measurements for the same crystals with the AC field applied perpendicular to the c-axis. (orig.)

  16. Mg-ion indiffusion of lithium niobate single crystal fiber

    Institute of Scientific and Technical Information of China (English)

    阙文修; 姚熹; 霍玉晶

    1995-01-01

    A core-cladding waveguide structure of lithium niobate single crystal fiber with different refractive index profiles has been obtained by using an Mg-ion indiffusion process. The propagation loss of the dadded crystal fiber is measured to be 14 times as low as that of the undadded crystal fibers. Mechanisms of Mg-ion indiffusion and reasons of lattice distortion are analyzed and discussed. It is found by X-ray diffraction analysis as well as scanning electron microscopy that MgO-rich layer in the magnesium diffused surface exhibits the crystal structure of a new compound from the Li-Mg-Nb-O ternary system. It is proposed, for the first time, that this new compound in MgO-rich layer is the real source of Mg-ion indiffusion lithium niobate.

  17. Growth and characterisation of gadolinium samarium oxalate single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Korah, I. [Dept. of Physics, St. George College, Aruvithura - 686122, Kerala (India); Joseph, C. [School of Pure and Applied Physics, Mahatma Gandhi University, Kottayam - 686562 (India); Ittyachan, M.A. [Dept. of Physics, Cochin University of Science and Technology, Cochin (India)

    2007-10-15

    Single crystals of Gadolinium Samarium Oxalate (GSO) are grown by gel method. The crystals are pale yellowish in colour. Morphology and size of the crystals are found to depend on pH of the medium, gel density, concentration of the reactants and acidity of the feed solution. The crystallinity of the grown sample was confirmed by X-ray diffraction studies and the lattice parameters were determined. X-ray diffractogram shows well defined peaks. IR spectrum confirms the presence of water molecules and carboxylic group. EDAX analysis confirms the presence of Gd and Sm in the sample. The thermal decomposition behaviour of the crystal was analysed using TGA and DTA studies. (copyright 2007 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  18. Nanomechanical properties of selected single pharmaceutical crystals as a predictor of their bulk behaviour.

    Science.gov (United States)

    Egart, Mateja; Janković, Biljana; Lah, Nina; Ilić, Ilija; Srčič, Stanko

    2015-02-01

    The main goal of this research was to assess the mechanical properties of APIs' polymorphic forms at the single-crystal level (piroxicam, famotidine, nifedipine, olanzapine) in order to predict their bulk deformational attributes, which are critical for some pharmaceutical technology processes. The mechanical properties of oriented single crystals were determined using instrumented nanoindentation (continuous stiffness measurement). All polymorphic forms investigated were previously identified using a combination of calorimetric and spectroscopic techniques. Mechanical properties such as Young's modulus and indentation hardness were consistent with the molecular packing of the polymorphic forms investigated with respect to crystal orientation. For mechanically interlocked structures, characteristic of most polymorphic forms, response of single crystals to indentation was isotropic. The material's bulk elastic properties can be successfully predicted by measuring Young's modulus of single crystals because a good linear correlation with a bulk parameter such as the tablets' elastic relaxation index was determined. The results confirm the idea that the intrinsic mechanical properties of pharmaceutical crystals (Young's modulus) largely control and anticipate their deformational behavior during tablet compression. Young's modulus and indentation hardness represent a very valuable and effective tool in preformulation studies for describing materials' mechanical attributes, which are important for technological processes in which materials are exposed to deformation.

  19. Compression Deformation Mechanisms at the Nanoscale in Magnesium Single Crystal

    Institute of Scientific and Technical Information of China (English)

    Yafang GUO; Xiaozhi TANG; Yuesheng WANG; Zhengdao WANG; Sidney YIP

    2013-01-01

    The dominant deformation mode at low temperatures for magnesium and its alloys is generally regarded to be twinning because of the hcp crystal structure.More recently,the phenomenon of a "loss" of the twins has been reported in microcompression experiments of the magnesium single crystals.Molecular dynamics simulation of compression deformation shows that the pyramidal slip dominates compression behavior at the nanoscale.No compression twins are observed at different temperatures at different loadings and boundary conditions.This is explained by the analyses,that is,the {10(1-)2} and {101-1} twins can be activated under c-axis tension,while compression twins will not occur when the c/a ratio of the hcp metal is below (/)3.Our theoretical and simulation results are consistent with recent microcompression experiments of the magnesium (0001) single crystals.

  20. Thermal properties of single-walled carbon nanotube crystal

    Institute of Scientific and Technical Information of China (English)

    Hu Li-Jun; Liu Ji; Liu Zheng; Qiu Cai-Yu; Zhou Hai-Qing; Sun Lian-Feng

    2011-01-01

    In this work,the thermal properties of a single-walled carbon nanotube (SWCNT) crystal are studied. The thermal conductivity of the SWCNT crystal is found to have a linear dependence on temperature in the temperature range from 1.9 K to 100.0 K. In addition,a peak (658 W/mK) is found at a temperature of about 100.0 K. The thermal conductivity decreases gradually to a value of 480 W/mK and keeps almost a constant in the temperature range from 100.0 K to 300.0 K. Meanwhile,the specific heat shows an obvious linear relationship with temperature in the temperature range from 1.9 K to 300.0 K. We discuss the possible mechanisms for these unique thermal properties of the single-walled carbon nanotube crystal.

  1. Atomistic simulation of shocks in single crystal and polycrystalline Ta

    Science.gov (United States)

    Bringa, E. M.; Higginbotham, A.; Park, N.; Tang, Y.; Suggit, M.; Mogni, G.; Ruestes, C. J.; Hawreliak, J.; Erhart, P.; Meyers, M. A.; Wark, J. S.

    2011-06-01

    Non-equilibrium molecular dynamics (MD) simulations of shocks in Ta single crystals and polycrystals were carried out using up to 360 million atoms. Several EAM and FS type potentials were tested up to 150 GPa, with varying success reproducing the Hugoniot and the behavior of elastic constants under pressure. Phonon modes were studied to exclude possible plasticity nucleation by soft-phonon modes, as observed in MD simulations of Cu crystals. The effect of loading rise time in the resulting microstructure was studied for ramps up to 0.2 ns long. Dislocation activity was not observed in single crystals, unless there were defects acting as dislocation sources above a certain pressure. E.M.B. was funded by CONICET, Agencia Nacional de Ciencia y Tecnología (PICT2008-1325), and a Royal Society International Joint Project award.

  2. Singly-resonant optical parametric oscillator based on KTA crystal

    Indian Academy of Sciences (India)

    S Das; S Gangopadhyay; C Ghosh; G C Bhar

    2005-01-01

    Tunable mid-infra-red radiation by singly resonant optical parametric oscillation based on KTA crystal pumped by multi-axial Gaussian shape beam from Q-switched Nd:YAG laser has been demonstrated. Threshold energy of oscillation at different idler wavelengths for different cavity length has been demonstrated. Single pass conversion efficiency of incident pump energy to infra-red wavelength has also been measured.

  3. Single particle detection in CMOS compatible photonic crystal nanobeam cavities.

    Science.gov (United States)

    Quan, Qimin; Floyd, Daniel L; Burgess, Ian B; Deotare, Parag B; Frank, Ian W; Tang, Sindy K Y; Ilic, Rob; Loncar, Marko

    2013-12-30

    We report the label-free detection of single particles using photonic crystal nanobeam cavities fabricated in silicon-on-insulator platform, and embedded inside microfluidic channels fabricated in poly-dimethylsiloxane (PDMS). Our system operates in the telecommunication wavelength band, thus leveraging the widely available, robust and tunable telecom laser sources. Using this approach, we demonstrated the detection of polystyrene nanoparticles with dimensions down to 12.5nm in radius. Furthermore, binding events of a single streptavidin molecule have been observed.

  4. About some practical aspects of X-ray diffraction : From single crystal to powders

    Energy Technology Data Exchange (ETDEWEB)

    Giacovazzo, C. [Bari Univ. (Italy). Dip. Geomineralogico

    1996-09-01

    An ideal polycrystalline material or power is an ensemble of a very large number of randomly oriented crystallites. It is shown the effect that this random orientation has on the diffraction of a specimen assumed to contain only one reciprocal lattice node. The most remarkable difference with the single-crystal case is that now must think of scattering vectors not as lying on discrete nodes of reciprocal lattice vectors, the distances from the single-crystal reciprocal lattice nodes to the origin of reciprocal space.

  5. Angular correlation of annihilation photons in ice single crystals

    DEFF Research Database (Denmark)

    Mogensen, O. E.; Kvajic, G.; Eldrup, Morten Mostgaard

    1971-01-01

    Linear-slit angular-correlation curves were obtained at - 148 °C for the [0001], [10¯10], and [11¯20] directions in single crystals of ice. Besides the narrow central peak, pronounced narrow side peaks were also observed. They occurred at angles θ=2πℏgz/mc, where gz is the projection of reciproca...

  6. Coupling of single quantum dots to a photonic crystal waveguide

    DEFF Research Database (Denmark)

    Lund-Hansen, Toke; Stobbe, Søren; Julsgaard, Brian

    . An alternative approach is to couple the quantum dot directly to the propagating mode of a photonic waveguide. We demonstrate the coupling of single quantum dots to a photonic crystal waveguide using time-resolved spontaneous emission measurements. A pronounced effect is seen in the decay rates of dots coupled...

  7. Transverse Mode Multi-Resonant Single Crystal Transducer

    Science.gov (United States)

    Snook, Kevin A. (Inventor); Liang, Yu (Inventor); Luo, Jun (Inventor); Hackenberger, Wesley S. (Inventor); Sahul, Raffi (Inventor)

    2015-01-01

    A transducer is disclosed that includes a multiply resonant composite, the composite having a resonator bar of a piezoelectric single crystal configured in a d(sub 32) transverse length-extensional resonance mode having a crystallographic orientation set such that the thickness axis is in the (110) family and resonance direction is the (001) family.

  8. Some Debye temperatures from single-crystal elastic constant data

    Science.gov (United States)

    Robie, R.A.; Edwards, J.L.

    1966-01-01

    The mean velocity of sound has been calculated for 14 crystalline solids by using the best recent values of their single-crystal elastic stiffness constants. These mean sound velocities have been used to obtain the elastic Debye temperatures ??De for these materials. Models of the three wave velocity surfaces for calcite are illustrated. ?? 1966 The American Institute of Physics.

  9. Organic field-effect transistors using single crystals

    Directory of Open Access Journals (Sweden)

    Tatsuo Hasegawa and Jun Takeya

    2009-01-01

    Full Text Available Organic field-effect transistors using small-molecule organic single crystals are developed to investigate fundamental aspects of organic thin-film transistors that have been widely studied for possible future markets for 'plastic electronics'. In reviewing the physics and chemistry of single-crystal organic field-effect transistors (SC-OFETs, the nature of intrinsic charge dynamics is elucidated for the carriers induced at the single crystal surfaces of molecular semiconductors. Materials for SC-OFETs are first reviewed with descriptions of the fabrication methods and the field-effect characteristics. In particular, a benchmark carrier mobility of 20–40 cm2 Vs−1, achieved with thin platelets of rubrene single crystals, demonstrates the significance of the SC-OFETs and clarifies material limitations for organic devices. In the latter part of this review, we discuss the physics of microscopic charge transport by using SC-OFETs at metal/semiconductor contacts and along semiconductor/insulator interfaces. Most importantly, Hall effect and electron spin resonance (ESR measurements reveal that interface charge transport in molecular semiconductors is properly described in terms of band transport and localization by charge traps.

  10. Field-effect transistors on tetracene single crystals

    NARCIS (Netherlands)

    De Boer, R.W.I.; Klapwijk, T.M.; Morpurgo, A.F

    2003-01-01

    We report on the fabrication and electrical characterization of field-effect transistors at the surface of tetracene single crystals. We find that the mobility of these transistors reaches the room-temperature value of 0.4 cm2/V s. The nonmonotonous temperature dependence of the mobility, its weak g

  11. Three-dimensional charge transport in organic semiconductor single crystals.

    Science.gov (United States)

    He, Tao; Zhang, Xiying; Jia, Jiong; Li, Yexin; Tao, Xutang

    2012-04-24

    Three-dimensional charge transport anisotropy in organic semiconductor single crystals - both plates and rods (above and below, respectively, in the figure) - is measured in well-performing organic field-effect transistors for the first time. The results provide an excellent model for molecular design and device preparation that leads to good performance.

  12. Single-crystal semiconductor films grown on foreign substrates

    Science.gov (United States)

    Vohl, P.

    1966-01-01

    Intermediate alloy formed between foreign substrates and semiconductor material enable the growth of single crystal semiconductor films on the alloy layer. The melted film must not ball up on the surface of the substrate and neither chemically react nor alloy with the intermediate alloy formed on the substrate.

  13. Low field investigations of single crystal Bi(2212): DC magnetization

    Energy Technology Data Exchange (ETDEWEB)

    Shaw, G.; Murphy, S.D.; Bhagat, S.M. (Center for Superconductivity Research and Dept. of Physics and Astronomy, Univ. of Maryland, College Park (USA))

    1989-12-01

    DC Magnetization measurements on micaceous Bi(2212) single crystals suggest that; 1. for T< or approx.25 K the material is a bulk Superconductor (SC), 2. as T is increased, the interlayer coupling weakens, until for T> or approx.55 K the lamina become independent. (orig.).

  14. Coupling of single quantum dots to a photonic crystal waveguide

    DEFF Research Database (Denmark)

    Lund-Hansen, Toke; Stobbe, Søren; Julsgaard, Brian;

    . An alternative approach is to couple the quantum dot directly to the propagating mode of a photonic waveguide. We demonstrate the coupling of single quantum dots to a photonic crystal waveguide using time-resolved spontaneous emission measurements. A pronounced effect is seen in the decay rates of dots coupled...

  15. TOPICAL REVIEW: Organic field-effect transistors using single crystals

    Science.gov (United States)

    Hasegawa, Tatsuo; Takeya, Jun

    2009-04-01

    Organic field-effect transistors using small-molecule organic single crystals are developed to investigate fundamental aspects of organic thin-film transistors that have been widely studied for possible future markets for 'plastic electronics'. In reviewing the physics and chemistry of single-crystal organic field-effect transistors (SC-OFETs), the nature of intrinsic charge dynamics is elucidated for the carriers induced at the single crystal surfaces of molecular semiconductors. Materials for SC-OFETs are first reviewed with descriptions of the fabrication methods and the field-effect characteristics. In particular, a benchmark carrier mobility of 20-40 cm2 Vs-1, achieved with thin platelets of rubrene single crystals, demonstrates the significance of the SC-OFETs and clarifies material limitations for organic devices. In the latter part of this review, we discuss the physics of microscopic charge transport by using SC-OFETs at metal/semiconductor contacts and along semiconductor/insulator interfaces. Most importantly, Hall effect and electron spin resonance (ESR) measurements reveal that interface charge transport in molecular semiconductors is properly described in terms of band transport and localization by charge traps.

  16. Growth of 2 Inch Eu-doped SrI2 single crystals for scintillator applications

    Science.gov (United States)

    Yoshikawa, Akira; Shoji, Yasuhiro; Yokota, Yuui; Kurosawa, Shunsuke; Hayasaka, Shoki; Chani, Valery I.; Ito, Tomoki; Kamada, Kei; Ohashi, Yuji; Kochurikhin, Vladimir

    2016-10-01

    A vertical Bridgman (VB) crystal growth process was established using modified micro-pulling-down (μ-PD) crystal growth system with a removable chamber that was developed for the growth of deliquescent halide single crystals because conventional μ-PD method does not allow growth of large bulk single crystals. Eu:SrI2 crystals were grown from the melt of (Sr0.98Eu0.02)I2 composition using carbon crucibles. Undoped μ-PD SrI2 crystals were used as seeds that were affixed to the bottom of the crucible. All the preparations preceding the growths and the hot zone assembling were performed in a glove box with Ar gas. Then the removable chamber was taken out of the glove box, attached to the μ-PD system, connected with a Turbo Molecular pump, and evacuated down to 10-4 Pa at 300 °C. After the baking procedure, high purity Ar gas (6N) was injected into the chamber. The crucible was heated by a high frequency induction coil up to the melting point of Eu:SrI2. After melting the starting materials, the crucible was displaced in downward direction for the crystal growth and then cooled down to room temperature. Thus, 2 in. and crack-free Eu:SrI2 bulk crystals were produced. The crystals had high transparency and did not contain any visible inclusions. The crystals were cut and polished in the glove box and then sealed in an aluminum container with an optical window for characterization. The details of the crystal growth are discussed.

  17. Ultralong single-crystal metallic Ni2Si nanowires with low resistivity.

    Science.gov (United States)

    Song, Yipu; Schmitt, Andrew L; Jin, Song

    2007-04-01

    Ultralong, single-crystal Ni2Si nanowires sheathed with amorphous silicon oxide were synthesized on a large scale by a chemical vapor transport (CVT) method, using iodine as the transport reagent and Ni2Si powder as the source material. Structural characterization using powder X-ray diffraction, electron microscopy, and energy-dispersive spectroscopy shows that the nanowires have Ni2Si-SiOx core-shell structure with single-crystal Ni2Si core and amorphous silicon oxide shell. The oxide shell is electrically insulating and can be removed by HF etching. Four-terminal electrical measurements show that the single-crystal nanowire has extremely low resistivity of 21 muOmega.cm and is capable of supporting remarkably high failure current density >108 A/cm2. These unique Ni2Si nanowires are very attractive nanoscale building blocks for interconnects and fully silicided (FUSI) gate applications in nanoelectronics.

  18. Shaped crystal growth of langasite-type piezoelectric single crystals and their physical properties.

    Science.gov (United States)

    Yokota, Yuui; Yoshikawa, Akira; Futami, Yoshisuke; Sato, Masato; Tota, Kazushige; Onodera, Ko; Yanagida, Takayuki

    2012-09-01

    We have grown shape-controlled langasite-type crystals by the micro-pulling-down (μ-PD) method. Columnar shaped La(3)Ta(0.5)Ga(5.5)O(14) (LTG), Ca(3)NbGa(3)Si(2)O(14) (CNGS), Ca(3)TaGa(3)Si(2)O(14) (CTGS), Sr(3)NbGa(3)Si(2)O(14) (SNGS), and Sr(3)Ta- Ga(3)Si(2)O(14) (STGS) crystals were grown using a Pt-Rh crucible with a 3-mm-diameter columnar die at the bottom. All grown crystals showed high transparency except for the peripheral area and diameter of approximately 3 mm. The chemical phases at the central parts of the grown crystals were identified as a single phase of langasite-type structure and their lattice parameters were almost the same as those of crystals grown by the Czochralski (Cz) method; however, some impurity phases were observed in the peripheral area. In X-ray rocking curve measurements, the grown crystals indicated equivalent crystallinity to the crystal grown by the Cz method. The piezoelectric constant d(11) of the CNGS crystal was 3.98 pC/N; this value is well correlated with those of previous reports.

  19. Buckling of Single-Crystal Silicon Nanolines under Indentation

    Directory of Open Access Journals (Sweden)

    Min K. Kang

    2008-01-01

    Full Text Available Atomic force microscope-(AFM- based indentation tests were performed to examine mechanical properties of parallel single-crystal silicon nanolines (SiNLs of sub-100-nm line width, fabricated by a process combining electron-beam lithography and anisotropic wet etching. The SiNLs have straight and nearly atomically flat sidewalls, and the cross section is almost perfectly rectangular with uniform width and height along the longitudinal direction. The measured load-displacement curves from the indentation tests show an instability with large displacement bursts at a critical load ranging from 480 μN to 700 μN. This phenomenon is attributed to a transition of the buckling mode of the SiNLs under indentation. Using a set of finite element models with postbuckling analyses, we analyze the indentation-induced buckling modes and investigate the effects of tip location, contact friction, and substrate deformation on the critical load of mode transition. The results demonstrate a unique approach for the study of nanomaterials and patterned nanostructures via a combination of experiments and modeling.

  20. Single crystal CVD diamond membranes for betavoltaic cells

    Science.gov (United States)

    Delfaure, C.; Pomorski, M.; de Sanoit, J.; Bergonzo, P.; Saada, S.

    2016-06-01

    A single crystal diamond large area thin membrane was assembled as a p-doped/Intrinsic/Metal (PIM) structure and used in a betavoltaic configuration. When tested with a 20 keV electron beam from a high resolution scanning electron microscope, we measured an open circuit voltage (Voc) of 1.85 V, a charge collection efficiency (CCE) of 98%, a fill-factor of 80%, and a total conversion efficiency of 9.4%. These parameters are inherently linked to the diamond membrane PIM structure that allows full device depletion even at 0 V and are among the highest reported up to now for any other material tested for betavoltaic devices. It enables to drive a high short-circuit current Isc up to 7.12 μA, to reach a maximum power Pmax of 10.48 μW, a remarkable value demonstrating the high-benefit of diamond for the realization of long-life radioisotope based micro-batteries.

  1. Mechanism of the emergence of the photo-EMF upon silicon liquid crystal-single crystal contact

    Science.gov (United States)

    Budagov, K. M.; Guseinov, A. G.; Pashaev, B. G.

    2017-03-01

    The effect light has on a silicon liquid crystal-single crystal contact at different temperatures of the surface doping of silicon, and when BaTiO3 nanoparticles are added to the composition of a liquid crystal, is studied. The mechanism of the emergence of the photo-EMF in the liquid crystal-silicon structure is explained.

  2. Low-dissipation cavity optomechanics in single-crystal diamond

    CERN Document Server

    Mitchell, Matthew; Lake, David P; Barclay, Paul E

    2015-01-01

    Single-crystal diamond cavity optomechanical devices are a promising example of a hybrid quantum system: by coupling mechanical resonances to both light and electron spins, they can enable new ways for photons to control solid state qubits. However, creating devices from high quality bulk diamond chips is challenging. Here we demonstrate single-crystal diamond cavity optomechanical devices that can enable photon-phonon-spin coupling. Cavity optomechanical coupling to $2\\,\\text{GHz}$ frequency ($f_\\text{m}$) mechanical resonances is observed. In room temperature ambient conditions, the resonances have a record combination of low dissipation ($Q_\\text{m} > 9000$) and high frequency, with $Q_\\text{m}\\cdot f_\\text{m} \\sim 1.9\\times10^{13}$ sufficient for room temperature single phonon coherence. The system is nearly sideband resolved, and radiation pressure is used to excite $\\sim 31\\,\\text{pm}$ amplitude mechanical self-oscillations that can drive diamond color centre electron spin transitions.

  3. Spatially resolved micro-photoluminescence imaging of porphyrin single crystals

    Science.gov (United States)

    Marin, Dawn M.; Castaneda, Jose; Kaushal, Meesha; Kaouk, Ghallia; Jones, Daniel S.; Walter, Michael G.

    2016-08-01

    We describe the collection of both time-resolved and steady-state micro-photoluminescence data from solution-grown single crystals of 5,15-bis(4-carbomethoxyphenyl)porphyrin (BCM2PP). Linking molecular orientation and structure with excited-state dynamics is crucial for engineering efficient organic solar cells, light-emitting diodes, and related molecular electronics. Photoluminescence features of single porphyrin crystals were imaged using a laser scanning confocal microscope equipped with time-correlated single photon counting (TCSPC). We show enhanced exciton lifetimes (τs1 = 2.6 ns) and stronger steady-state emission in crystalline BCM2PP samples relative to semicrystalline thin films (τs1 = 1.8 ns).

  4. Role of crystal orientation on chemical mechanical polishing of single crystal copper

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Aibin, E-mail: abzhu@mail.xjtu.edu.cn; He, Dayong; Luo, Wencheng; Liu, Yangyang

    2016-11-15

    Highlights: • The role of crystal orientation in cooper CMP by quasi-continuum was studied. • The atom displacement diagrams were obtained and analyzed. • The stress distribution diagrams and load-displacement curves were analyzed. • This research is helpful to revealing the material removal mechanism of CMP. - Abstract: The material removal mechanism of single crystal copper in chemical mechanical polishing (CMP) has not been intensively investigated. And the role of crystal orientation in CMP of single crystal cooper is not quite clear yet. Quasi-continuum method was adopted in this paper to simulate the process of nano-particles grinding on single crystal copper in CMP process. Three different crystal orientations, i.e. x[100]y[001], x[001]y[110] and x[–211]y[111], were chosen for analysis. The atom displacement diagrams, stress distribution diagrams and load-displacement curves were obtained. After analyzing the deformation mechanism, residual stress of the work piece material and cutting force, results showed that, the crystal orientation of work piece has great influence on the deformation characteristics and surface quality of work piece during polishing. In the A(001)[100] orientation, the residual stress distribution after polishing is deeper, and the stress is larger than that in the B(110)[001] and C(111)[–211] orientations. And the average tangential cutting force in the A(001)[100] orientation is much larger than those in the other two crystal orientation. This research is helpful to revealing the material removal mechanism of CMP process.

  5. Study on single-mode photonic crystal fibers in wide wavelength range

    Institute of Scientific and Technical Information of China (English)

    Wei Chen; Jinyan Li; Shiyu Li; Haiqing Li; Zuowen Jiang; Jinggang Peng

    2007-01-01

    @@ The comparatively large mode field single-mode photonic crystal fibers (PCFs) were fabricated, the lightwave from 600- to 1600-nm wavelength along this PCF could be transmitted in single mode. The manufacturing process technologies of the PCFs were exploited, and the drawing parameters of PCFs were also presented. The structure parameters on the single-mode performance of PCFs were theoretically studied,and in practice the design was proved. The measurements of cut-off wavelength and light intensity distribution showed that the PCF had comparatively wide single-mode operating wavelength range.

  6. Transport Properties of Bi2S3 Single Crystals

    Institute of Scientific and Technical Information of China (English)

    H.T.Shaban; M.M.Nassary; M.S.El-Sadek

    2008-01-01

    Bi2S3 single crystals were grown by using a modification of Bridgman method. Measurements of the electrical conductivity, Hall effect and thermoelectric power (TEP) were preformed in two crystallographic directions(parallel and perpendicular to the c-axis). The measurements showed that the electrical conductivity, Hall mobility, and Seebeck coefficient have anisotropic nature. From these measurements some physical parameters were estimated and the crystals showed n-type of conduction mechanism. Also, values of the energy gap were found to be different in the two directions.

  7. Impurity centers in LiF:Cu{sup +} single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Nepomnyashchikh, A I; Shalaev, A A; Subanakov, A K; Paklin, A S; Bobina, N S; Myasnikova, A S; Shendrik, R, E-mail: alshal@igc.irk.ru

    2010-11-15

    The single crystals LiF with copper impurity were grown by Czochralski method. The concentrations of Cu in the crystals were 0,0004-0,002%. In order to determine a copper valence impurity, measurements of the ESR, emission, excitation and absorption spectra were performed. We found emission peak at 410 nm and excitation peak at 250 nm. In agreement with reference, these peaks point to presence of Cu{sup +} in our samples. The mechanisms of capture and recombination providing process of thermoluminescence were recognized.

  8. Organic single-crystal field-effect transistors

    Directory of Open Access Journals (Sweden)

    Colin Reese

    2007-03-01

    Full Text Available Organic molecular crystals hold great promise for the rational development of organic semiconductor materials. Their long-range order not only reveals the performance limits of organic materials, but also provides unique insight into their intrinsic transport properties. The field-effect transistor (FET has served as a versatile tool for electrical characterization of many facets of their performance. In the last few years, breakthroughs in single-crystal FET fabrication techniques have enabled the realization of field-effect mobilities far surpassing amorphous Si, observation of the Hall effect in an organic material, and the study of transport as an explicit function of molecular packing and chemical structure.

  9. Large fraction of crystal directions leads to ion channeling

    Science.gov (United States)

    Nordlund, K.; Djurabekova, F.; Hobler, G.

    2016-12-01

    It is well established that when energetic ions are moving in crystals, they may penetrate much deeper if they happen to be directed in some specific crystal directions. This `channeling' effect is utilized for instance in certain ion beam analysis methods and has been described by analytical theories and atomistic computer simulations. However, there have been very few systematic studies of channeling in directions other than the principal low-index ones. We present here a molecular dynamics-based approach to calculate ion channeling systematically over all crystal directions, providing ion `channeling maps' that easily show in which directions channeling is expected. The results show that channeling effects can be quite significant even at energies below 1 keV, and that in many cases, significant planar channeling occurs also in a wide range of crystal directions between the low-index principal ones. In all of the cases studied, a large fraction (˜20 -60 % ) of all crystal directions show channeling. A practical implication of this is that modern experiments on randomly oriented nanostructures will have a large probability of channeling. It also means that when ion irradiations are carried out on polycrystalline samples, channeling effects on the results cannot a priori be assumed to be negligible. The maps allow for easy selection of good `nonchanneling' directions in experiments or alternatively finding wide channels for beneficial uses of channeling. We implement channeling theory to also give the fraction of channeling directions in a manner directly comparable to the simulations. The comparison shows good qualitative agreement. In particular, channeling theory is very good at predicting which channels are active at a given energy. This is true down to sub-keV energies, provided the penetration depth is not too small.

  10. Growth, structural and magnetic characterization of Al-substituted barium hexaferrite single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Vinnik, D.A., E-mail: denisvinnik@gmail.com [South Ural State University, 454080, Lenin’s Prospect 76, Chelyabinsk (Russian Federation); Zherebtsov, D.A., E-mail: zherebtsov_da@yahoo.com [South Ural State University, 454080, Lenin’s Prospect 76, Chelyabinsk (Russian Federation); Mashkovtseva, L.S., E-mail: l2787@yandex.ru [South Ural State University, 454080, Lenin’s Prospect 76, Chelyabinsk (Russian Federation); Nemrava, S., E-mail: nemrava@iac.uni-stuttgart.de [University of Stuttgart, 70569, Pfaffenwaldring 55, Stuttgart (Germany); Bischoff, M., E-mail: mbischoff07@gmail.com [University of Stuttgart, 70569, Pfaffenwaldring 55, Stuttgart (Germany); Perov, N.S., E-mail: perov@magn.ru [Moscow State University, 119991, Leninskie Gory 1-3, Moscow (Russian Federation); Baltic Federal University, 236041, Nevskogo Street 14 A, Kaliningrad (Russian Federation); Semisalova, A.S., E-mail: semisalova@magn.ru [Moscow State University, 119991, Leninskie Gory 1-3, Moscow (Russian Federation); Krivtsov, I.V., E-mail: zapasoul@gmail.com [South Ural State University, 454080, Lenin’s Prospect 76, Chelyabinsk (Russian Federation); Isaenko, L.I., E-mail: lisa@igm.nsc.ru [Institute of Geology and Mineralogy Siberian Branch Russian Academy of Sciences, 630090, Ac. Koptyuga Ave., Novosibirsk (Russian Federation); Mikhailov, G.G., E-mail: ph-ch-susu@mail.ru [South Ural State University, 454080, Lenin’s Prospect 76, Chelyabinsk (Russian Federation); Niewa, R., E-mail: iacniewa@iac.uni-stuttgart.de [University of Stuttgart, 70569, Pfaffenwaldring 55, Stuttgart (Germany)

    2014-12-05

    Highlights: • Growth of large Al-substituted crystals BaFe{sub 12−x}Al{sub x}O{sub 19.} • Al-content controllable by flux composition. • Crystallographic site preference of Al unraveled. • Magnetic characterization depending on Al-content. - Abstract: Large single crystals of aluminum-substituted M-type barium hexaferrite BaFe{sub 12−x}Al{sub x}O{sub 19} were obtained from carbonate flux. The Al content in the crystals can be controlled via the Al content of the flux up to x = 1.1 according to single crystal X-ray structure refinements. Al shows a distinct preference to substitute Fe on crystallographic sites with high coordination numbers by oxygen atoms, whereas no significant amounts of Al can be found on a tetrahedrally coordinated site. An increasing amount of the aluminum dopant results in a monotonous reduction of the Curie temperature from 440 to 415 °C and the saturation magnetization at room temperature from 68 to 57 emu/g for single crystal and from 61 to 53 emu/g for powder samples.

  11. Crystal growth, electrical and photophysical properties of Tl2S layered single crystals

    Indian Academy of Sciences (India)

    A M Badr; H A Elshaikh; I M Ashraf

    2009-05-01

    The Tl2S compound was prepared in a single crystal form using a special local technique, and the obtained crystals were analysed by X-ray diffraction. For the resultant crystals, the electrical properties (electrical conductivity and Hall effect) and steady-state photoconductivity were elucidated in this work. The electrical measurements extend from 170 to 430 K, where it was found that ⊥ = 8.82 × 10−5 Sm-1 when current flow direction makes right angle to the cleavage plane of the crystals. In the same range of temperatures, it was found that ∥ = 4.73 × 10−5 Sm-1 when the current flow is parallel to the cleavage plane. In line with the investigated range of temperatures, the widths of the band gaps were calculated and discussed as also the results of the electrical conductivity and Hall effect measurements. In addition, the anisotropy of the electrical conductivity (⊥/∥) for the obtained crystals was also studied in this work. Finally the photosensitivity was calculated for different levels of illumination as a result of the photoconductivity measurements, which showed that the recombination process in Tl2S single crystals is a monomolecular process.

  12. The crystallization and optical properties of LiNbO3 single crystals

    Directory of Open Access Journals (Sweden)

    SLOBODANKA NIKOLIC

    2000-06-01

    Full Text Available LiNbO3 single crystals were grown by the Czochralski technique in an air atmosphere. The critical crystal diameter Dc = 1.5 cm and the critical rate of rotation wc = 35 rpm were calculated from the dynamic of fluids equations for buoyancy-driven and forced convections under which the shape of the melt/crystal interface changed. The domain inversion was carried out at 1473 K using a 10 min 3.75 V/cm electric field. The obtained crystals were cut, polished and etched to determine the presence of dislocations and single domain structures. The lattice parameters a = 0.51494 nm, c = 1.38620 nm and V = 0.3186 nm3 were determined by X-ray powder diffraction. The optical properties were studied by infrared spectroscopy in the wave number range 20 - 5000 cm-1. With decreasing temperature, an atypical behaviour of the phonon modes, due to the ferroelectric properties of LiNbO3 single crystal, could be seen. The optical constants were calculated by Kramers-Kronig analysis and the value of the critical temperature was estimated. The obtained results are discussed and compared with published data.

  13. Strain gradient crystal plasticity analysis of a single crystal containing a cylindrical void

    DEFF Research Database (Denmark)

    Borg, Ulrik; Kysar, J.W.

    2007-01-01

    The effects of void size and hardening in a hexagonal close-packed single crystal containing a cylindrical void loaded by a far-field equibiaxial tensile stress under plane strain conditions are studied. The crystal has three in-plane slip systems oriented at the angle 60 degrees with respect...... to one another. Finite element simulations are performed using a strain gradient crystal plasticity formulation with an intrinsic length scale parameter in a non-local strain gradient constitutive framework. For a vanishing length scale parameter the non-local formulation reduces to a local crystal...... to three times higher for smaller void sizes than for larger void sizes in the non-local material....

  14. Crystallization of inorganic nonlinear optical zinc di-magnesium chloro sulphate (ZDMCS) single crystal

    Science.gov (United States)

    Arivuselvi, R.; Ruban Kumar, A.

    2017-02-01

    The growth of inorganic zinc di-magnesium chloro sulphate (ZDMCS) nonlinear optical material from low temperature evaporation technique at ambient temperature has been reported. The dimension of harvested crystal is 28×10×2 mm3 and is possess rectangular shape morphology. The single crystal X-ray diffraction studies confirmed that the grown crystal belongs to the system of trigonal. The S-Cl stretching vibrations and Mg2+ ions present in the sample were observed by FTIR spectrometer. The cut-off wavelength of the grown crystal is about 203 nm is found by UV-visible absorption spectrum. The nonlinear optical efficiency was determined by powder Kurtz Perry technique. EDAX spectrum confirms the presence of elements within the material. Dielectric nature of the sample was analyzed for the frequency range 50 Hz to 5 MHz at different temperatures. The mechanical behaviour of the title compound was investigated using Vicker's microhardness tester.

  15. Semiconducting polymer single crystals and devices (Conference Presentation)

    Science.gov (United States)

    Dong, Huanli

    2016-11-01

    Highly ordered organic semiconductors in solid state with optimal molecular packing are critical to their electrical performance. Single crystals with long-range molecular orders and nearly perfect molecular packing are the best candidates, which already have been verified to exhibit the highest performance whether based on inorganic or small organic materials. However, in comparison, preparing high quality polymer crystals remains a big challenge in polymer science because of the easy entanglements of the long and flexible polymer chains during self-assembly process, which also significantly limits the development of their crystalline polymeric electronic devices. Here we have carried out systematical investigations to prepare high quality semiconducting polymers and high performance semiconducting polymer crystal optoelectronic devices have been successfully fabricated. The semiconducting polymeric devices demonstrate significantly enhanced charge carreir transport compared to their thin films, and the highest carreir mobiltiy could be approcahing 30 cm2 V-1s-1, one of the highest mobiltiy values for polymer semiconductors.

  16. Neutron transmission and reflection at a copper single crystal

    Energy Technology Data Exchange (ETDEWEB)

    Adib, M.; Maayouf, R.M.A.; Abdel-Kawy, A.; Fayek, M.; Habib, N. (Atomic Energy Establishment, Cairo (Egypt). Reactor and Neutron Physics Dept.); Wahba, M. (Ain Shams Univ., Cairo (Egypt). Dept. of Engineering Physics and Mathematics)

    1991-06-01

    Neutron transmission and reflection at a copper single crystal cut along the (111) plane were studied with the fixed-scattering-angle spectrometer installed at the ET-RR-1 reactor. The transmission was measured for neutron wavelengths between 0.15 and 0.46 nm and various orientations of the (111) plane with respect to the incident beam. When used as a neutron band pass filter, the crystal is optimally oriented when the neutron beam is incident parallel to the (111) direction. The reflectivity was measured for the (111) plane at 45deg with respect to the incident beam. The results were found to be in reasonable agreement with a value predicted for the reflected intensity at an imperfect crystal with finite absorption. (orig.).

  17. Resonant magnetic properties of gadolinium-gallium garnet single crystals

    Science.gov (United States)

    Bedyukh, A. R.; Danilov, V. V.; Nechiporuk, A. Yu.; Romanyuk, V. F.

    1999-03-01

    The results of experimental investigations of resonant magnetic properties of gadolinium-gallium garnet (GGG) single crystals at temperatures 4.2-300 K in the frequency range 1.6-9.3 GHz are considered. It is found that magnetic losses in GGG are determined by the initial splitting of energy levels for gadolinium ions in the garnet crystal lattice and by the dipole broadening. The width and shape of the electron paramagnetic resonance (EPR) line in the GGG crystal, whose asymmetry is manifested most strongly at low frequencies, can be explained by the influence of these factors. Magnetic losses in GGG increase with frequency and upon cooling. It is found that the EPR linewidth increases considerably with decreasing temperature due to the presence of rapidly relaxing impurities.

  18. Size effects in single crystal thin films : nonlocal crystal plasticity simulations

    NARCIS (Netherlands)

    Yefimov, S; van der Giessen, E

    2005-01-01

    Stress relaxation in single crystalline thin films on substrates subjected to thermal loading is studied using a recently proposed nonlocal continuum crystal plasticity theory. The theory is founded on a statistical-mechanics description of the collective behaviour of dislocations in multiple slip,

  19. A new material for single crystal modulators: BBO

    Science.gov (United States)

    Bammer, F.; Schumi, T.; Petkovsek, R.

    2011-06-01

    Single crystal photo-elastic modulators (SCPEM) are based on a single piezo-electric crystal which is electrically excited on a resonance frequency such that the resulting resonant oscillation causes a modulated artificial birefringence due to the photo-elastic effect. Polarized light experience in such a crystal a strong modulation of polarization, which, in connection with a polarizer, can be used for Q-switching of lasers with pulse repetition frequencies in the range of 100- 1000 kHz. A particularly advantageous configuration is possible with crystals from the symmetry class 3m. Besides LiTaO3 and LiNbO3, both already well explored as SCPEM-materials, we introduce now BBO, which offers a very low absorption in the near infrared region and is therefore particularly suited for Q-switching of solid state lasers. We demonstrate first results of such a BBO-modulator with the dimensions 8.6 x 4.05 x 4.5mm in x-, y-, z- direction, which offers a useful resonance and polarization modulation at 131.9 kHz. Since the piezo-electric effect is small, the voltage amplitude for achieving Q-switching for an Nd:YAG-laser is expected to be in the range of 100V. Nevertheless it is a simple and robust device to achieve Q-switching with a high fixed repetition rate for high power solid state lasers.

  20. Frictional properties of single crystals HMX, RDX and PETN explosives.

    Science.gov (United States)

    Wu, Y Q; Huang, F L

    2010-11-15

    The frictional properties of single crystals of cyclotetramethylene tetranitramine (HMX), cyclotrimethylene trinitramine (RDX) and pentaerythritol tetranitrate (PETN) secondary explosives are examined using a sensitive friction machine. The explosive crystals used for the measurements are at least 3.5 mm wide. The friction coefficients between crystals of the same explosive (i.e., HMX on HMX, etc.), crystals of different explosives (i.e., HMX on RDX, etc.), and each explosive and a well-polished gauge steel surface are determined. The frictional surfaces are also studied under an environmental scanning electron microscope (ESEM) to analyze surface microstructural changes under increasing loading forces. The friction coefficients vary considerably with increasing normal loading forces and are particularly sensitive to slider shapes, crystal roughness and the mechanical properties of both the slider and the sample. With increasing loading forces, most friction experiments show surface damage, consisting of grooves, debris, and nano-particles, on both the slider and sample. In some cases, a strong evidence of a localized molten state is found in the central region of the friction track. Possible mechanisms that affect the friction coefficient are discussed based on microscopic observations. Copyright © 2010 Elsevier B.V. All rights reserved.

  1. Dispersion of optical activity of magnesium sulfite hexahydrate single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Dimov, T; Bunzarov, Zh; Iliev, I; Petkova, P; Tzoukrovski, Y, E-mail: dimov@shu-bg.ne

    2010-11-01

    The magnesium sulfite hexahydrate (MgSO{sub 3}.6H{sub 2}O) crystals are unique because they are the only representative (with sodium periodate) of the crystallographic class C{sub 3} (without a center of symmetry). The crystal symmetry suggests presence of nonlinearity, piezo- and pyro-electric properties and gyrotropy as well. Single crystals of MgSO{sub 3}.6H{sub 2}O (pure and doped with Ni, Co and Zn) for the time being are grown only by the original method developed in the Laboratory for Crystal growth at the Faculty of Physics in Sofia University. The first results of optical activity of pure MgSO{sub 3}.6H{sub 2}O and Zn doped MgSO{sub 3}.6H{sub 2}O crystals are described and analyzed in a wide spectral range. The optical activity manifests itself in the direction (0001) as a rotation of the polarization plane.

  2. Nanofluidics of Single-crystal Diamond Nanomechanical Resonators

    CERN Document Server

    Kara, V; Atikian, H; Yakhot, V; Loncar, M; Ekinci, K L

    2015-01-01

    Single-crystal diamond nanomechanical resonators are being developed for countless applications. A number of these applications require that the resonator be operated in a fluid, i.e., a gas or a liquid. Here, we investigate the fluid dynamics of single-crystal diamond nanomechanical resonators in the form of nanocantilevers. First, we measure the pressure-dependent dissipation of diamond nanocantilevers with different linear dimensions and frequencies in three gases, He, N$_2$, and Ar. We observe that a subtle interplay between the length scale and the frequency governs the scaling of the fluidic dissipation. Second, we obtain a comparison of the surface accommodation of different gases on the diamond surface by analyzing the dissipation in the molecular flow regime. Finally, we measure the thermal fluctuations of the nanocantilevers in water, and compare the observed dissipation and frequency shifts with theoretical predictions. These findings set the stage for developing diamond nanomechanical resonators o...

  3. Frequency dispersion of flexoelectricity in PMN-PT single crystal

    Directory of Open Access Journals (Sweden)

    Longlong Shu

    2017-01-01

    Full Text Available The mechanism of the recent discovered enhanced flexoelectricity in perovskites has brought about numerous controversies which still remain unclear. In this paper, we employed relaxor 0.68Pb(Mg2/3Nb1/3O3 -0.32PbTiO3 (PMN-PT single crystals for study. The observed flexoelectric coefficient in PMN-PT single crystal reaches up to 100 μC/m, and in a relative low frequency range, exhibits an abnormal frequency dispersion phenomenon with a positive relationship with frequency. Such frequency dispersion regulation is different from the normal relaxation behavior that usually occur a time delay, and hence proves the flexoelectricity acting more like bulk effect rather than surface effect in this kind of materials.

  4. Growth of EuO single crystals at reduced temperatures

    Science.gov (United States)

    Ramirez, Daniel C.; Besara, Tiglet; Whalen, Jeffrey B.; Siegrist, Theo

    2017-01-01

    Single crystals of (E u1 -xB ax)O have been grown in a molten barium-magnesium metal flux at temperatures up to 1000 °C, producing single crystals of (E u1 -xB ax)O with barium doping levels ranging from x =0.03 to x =0.25 . Magnetic measurements show that the ferromagnetic Curie temperature TC correlates with the Ba doping levels, and a modified Heisenberg model was used to describe the stoichiometry dependence of TC. Extrapolation of the results indicates that a sample with Ba concentration of x =0.72 should have a TC of 0 K, potentially producing a quantum phase transition in this material.

  5. High pressure single crystal and powder XRD study for neighborite

    Science.gov (United States)

    Liu, H.

    2016-12-01

    After Murakami et al. (2004) identified the post-perovskite (ppv) phase transition in MgSiO3 perovskite (pv) at pressures and temperatures consistent with the onset of Earth's D" layer, lots of post-perovskite type phase transitions were founded in other similar systems. These discoveries provided a better understanding of heterogeneous structures and seismic anisotropy observed in the controversial region of the lower mantle. With previous experimental evidence showing the analogue system of neighborite NaMgF3 will transform from pv to ppv at 30 GPa, we performed high quality single crystal XRD experiment, which led to a more precise structure determination. Using helium as pressure medium, one metastable low symmetric phase before the pv-ppv structure transition was discovered, whose total energy was calculated as well. The comparison between single crystal and powder XRD data will be presented, and potential application will be discussed.

  6. Synthesis and characterization of single-crystal strontium hexaboride nanowires.

    Science.gov (United States)

    Jash, Panchatapa; Nicholls, Alan W; Ruoff, Rodney S; Trenary, Michael

    2008-11-01

    Catalyst-assisted growth of single-crystal strontium hexaboride (SrB6) nanowires was achieved by pyrolysis of diborane (B2H6) over SrO powders at 760-800 degrees C and 400 mTorr in a quartz tube furnace. Raman spectra demonstrate that the nanowires are SrB6, and transmission electron microscopy along with selected area diffraction indicate that the nanowires consist of single crystals with a preferred [001] growth direction. Electron energy loss data combined with the TEM images indicate that the nanowires consist of crystalline SrB 6 cores with a thin (1 to 2 nm) amorphous oxide shell. The nanowires have diameters of 10-50 nm and lengths of 1-10 microm.

  7. Annealing Effect on Photovoltages of Quartz Single Crystals

    Institute of Scientific and Technical Information of China (English)

    TIAN Lu; ZHAO Song-Qing; ZHAO Kun

    2010-01-01

    @@ We investigate the photovoltaic effects of quartz single crystals annealed at high temperatures in ambient atmosphere.The open-circuit photovoltages and surface morphologies strongly depend on the heating treatments.When the annealing temperature increases from room temperature to 900℃,the rms roughness of quartz single crystal wafers increases from 0.207 to 1.011 nm.In addition,the photovoltages decrease from 1.994#V at room temperature to 1.551 μ V after treated at 500℃,and then increase up to 9.8μV after annealed at 900℃.The inner mechanism of the present photovoltaic response and surface morphologies is discussed.

  8. Electrical conductivity and dielectric properties of potassium sulfamate single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, A.S.; Iype, L.; Rajesh, R. [School of Pure and Applied Physics, Mahatma Gandhi University, Kottayam (India); Varughese, G. [Department of Physics, Catholicate College, Pathanamthitta, Kerala (India); Joseph, G. [Department of Physics, Sacred Heart College, Thevera, Cochin, Kerala (India); Louis, G. [Department of Physics, Cochin University of Science and Technology, Cochin (India)

    2011-10-15

    Single crystals of potassium sulfamate are grown by the method of slow evaporation at constant temperature. AC electrical conductivity of potassium sulfamate is measured in the temperature range 300-430 K and in the frequency region between 100 Hz and 3 MHz along the a, b and c-axes. Complex impedance spectroscopy is used to investigate the frequency response of the electrical properties of the potassium sulfamate single crystal. Temperature variation of AC conductivity and dielectric measurements show a slope change around 345 K for both heating and cooling run and this anomaly is attributed as phase transition, which is well supported by the DSC measurements. Value of loss tangent in the temperature region 330-400 K is found to be very low. Activation energies for the conduction process are calculated along the a, b and c-axes. (copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  9. Solar furnace satellite for large diameter crystal growth in space

    Science.gov (United States)

    Overfelt, Tony; Wells, Mark; Blake, John

    1993-02-01

    Investigators worldwide are preparing experiments to test the influence of low gravity found in space on the growth of many crystalline materials. However, power limitations prevent existing space crystal growth furnaces from being able to process samples any larger than about 2 cm, and in addition, the background microgravity levels found on the Space Shuttle are not low enough to significantly benefit samples much larger than 2 cm. This paper describes a novel concept of a free-flying platform utilizing well-established solar furnace technology to enable materials processing in space experiments on large-diameter crystals. The conceptual design of this Solar Furnace Satellite is described along with its operational scenario and the anticipated g levels.

  10. A single-solenoid pulsed-magnet system for single-crystal scattering studies.

    Science.gov (United States)

    Islam, Zahirul; Capatina, Dana; Ruff, Jacob P C; Das, Ritesh K; Trakhtenberg, Emil; Nojiri, Hiroyuki; Narumi, Yasuo; Welp, Ulrich; Canfield, Paul C

    2012-03-01

    We present a pulsed-magnet system that enables x-ray single-crystal diffraction in addition to powder and spectroscopic studies with the magnetic field applied on or close to the scattering plane. The apparatus consists of a single large-bore solenoid, cooled by liquid nitrogen. A second independent closed-cycle cryostat is used for cooling samples near liquid helium temperatures. Pulsed magnetic fields close to ~30 T with a zero-to-peak-field rise time of ~2.9 ms are generated by discharging a 40 kJ capacitor bank into the magnet coil. The unique characteristic of this instrument is the preservation of maximum scattering angle (~23.6°) on the entrance and exit sides of the magnet bore by virtue of a novel double-funnel insert. This instrument will facilitate x-ray diffraction and spectroscopic studies that are impractical, if not impossible, to perform using split-pair and narrow-opening solenoid magnets. Furthermore, it offers a practical solution for preserving optical access in future higher-field pulsed magnets.

  11. The Herbertsmithite Hamiltonian: {mu}SR measurements on single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Ofer, Oren [TRIUMF, 4004 Wesbrook Mall, Vancouver, BC, V6T2A3 (Canada); Keren, Amit [Department of Physics, Technion, Haifa 32000 (Israel); Brewer, Jess H [Department of Physics and Astronomy, University of British Columbia, Vancouver, BC, V6T1Z1 (Canada); Han, Tianheng H; Lee, Young S, E-mail: oren@triumf.ca [Department of Physics, Massachusetts Institute of Technology, Cambridge, MA 02139 (United States)

    2011-04-27

    We present transverse field muon spin rotation/relaxation measurements on single crystals of the spin-1/2 kagome antiferromagnet Herbertsmithite. We find that the spins are more easily polarized when the field is perpendicular to the kagome plane. We demonstrate that the difference in magnetization between the different directions cannot be accounted for by Dzyaloshinskii-Moriya-type interactions alone and that anisotropic axial interaction is present.

  12. Ion implantation induced blistering of rutile single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Xiang, Bing-Xi [School of Physics, Shandong University, Jinan, Shandong 250100 (China); Jiao, Yang [College of Physics and Electronics, Shandong Normal University, Jinan, Shandong 250100 (China); Guan, Jing [School of Physics, Shandong University, Jinan, Shandong 250100 (China); Wang, Lei [School of Physics, Shandong University, Jinan, Shandong 250100 (China); Key Laboratory of Nanodevices and Applications, Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences (China)

    2015-07-01

    The rutile single crystals were implanted by 200 keV He{sup +} ions with a series fluence and annealed at different temperatures to investigate the blistering behavior. The Rutherford backscattering spectrometry, optical microscope and X-ray diffraction were employed to characterize the implantation induced lattice damage and blistering. It was found that the blistering on rutile surface region can be realized by He{sup +} ion implantation with appropriate fluence and the following thermal annealing.

  13. Microstructure evolution of single crystal copper wires in cold drawing

    Institute of Scientific and Technical Information of China (English)

    CHEN; Jian; YAN; Wen; WANG; XueYan; FAN; XinHui

    2007-01-01

    The deformation microstructure evolution of single crystal copper wires produced by OCC method has been studied with the help of TEM, EBSD and OM. The results show that there are a small number of dendrites and twins in the undeformed single crystal copper wires. However, it is difficult to observe these dendrites in deformed single crystal copper wires. The structure evolution of deformed single crystal copper wires during drawing process can be divided into three stages. When the true strain is lower than 0.94, macroscopic subdivision of grains is not evident, and the microscopic evolution of deformed structure is that the cells are formed and elongated in drawn direction. When the true strain is between 0.94 and 1.96, macroscopic subdivision of grains takes place, and the number of microbands located on {111} and cell blocks is much more than that with the true strain lower than 0.94. When the true strain is larger than 1.96, the macroscopic subdivision of grains becomes more evident than that with the true strain between 0.94 and 1.96, and S-bands structure and lamellar boundaries will be formed. From EBSD analysis, it is found that part of texture resulting from solidifying is transformed into and due to shear deformation, but texture component is still kept in majority. When the true strain is 0.94, the misorientation angle of dislocation boundaries resulting from deformation is lower than 14°. However, when the true strain arrives at 1.96, the misorientation angle of some boundaries will be greater than 50°, and the peak of misorientation angle distribution produced by texture evolution is located in the range between 25° and 30°.

  14. Study of diffusion of Ag in Cu single crystals

    CERN Document Server

    Wang, R

    2002-01-01

    4.0 MeV sup 7 Li sup + sup + RBS and AES were used for investigations of thermal diffusion of Ag in Cu single crystals. The annealing of samples was carried out in vacuum in the temperature range from 498 to 613 K. The element depth concentration profiles transformed from RBS spectra indicate that the diffusion of Ag into Cu is a typical volume diffusion. The Arrhenius parameters corresponding to the diffusion were obtained.

  15. Crystallization of Polymers at liquid/liquid interface templated by single-walled carbon nanotubes

    Science.gov (United States)

    Wang, Wenda; Li, Christopher

    2012-02-01

    Nanosized single-walled carbon nanotube rings were fabricated by using a Pickering emulsion-based method. By tuning a water/oil/SWNT miniemulsion system, SWNT rings with a diameter of ˜200 nm can be readily achieved. The formation mechanism is attributed to the bending force induced by the curved liquid/liquid interface. Crystallization of polyethylene homo- and copolymers using this unique SWNT rings as the nucleation agent was conducted at the curved liquid/liquid interface. Crystal structure, hybrid morphology and crystallization kinetics were systematically studied. The structure of controlled alternating patterns on SWNT rings has great potential in various applications in large-scale integrated circuits and single-electron devices.

  16. Single crystal growth and magnetic excitations of transistion metal oxide CoV2 O6

    Science.gov (United States)

    Stockdale, Christopher; Wallington, F.; Taylor, J. W.; Garcia-Sakai, V.; Arevalo-Lopez, A. M.; Attfield, P.; Stock, C.

    2015-03-01

    Low-dimensional magnetic materials are an area of interest due to their unusual properties such as metamagnetism and magnetization plateaus. Solid state synthesis has produced polycrystalline CoV2O6 which exists in two polymorphs: one with a monoclinic structure, and the other with a triclinic structure. Single crystals have been grown from polycrystalline CoV2O6 using the flux method under vacuum and are large enough to aid in single crystal neutron diffraction. Magnetic excitations have been measured using powder neutron diffraction in the low temperatures regime with variable energy. The magnetic excitations have been compared between the two phases. The energy of the system has been modelled in terms of the spin-orbit coupling, structural distortions, and the crystal field and compared to neutron data.

  17. The unoccupied electronic structure characterization of hydrothermally grown ThO{sub 2} single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Kelly, T.D.; Petrosky, J.C.; McClory, J.W. [Department of Engineering Physics, Air Force Institute of Technology, WPAFB, OH (United States); Turner, D. [Oak Ridge Institute for Science and Education, Oak Ridge, TN (United States); Mann, J.M. [Sensors Directorate, Air Force Research Laboratory, Wright-Patterson AFB, OH (United States); Kolis, J.W. [Department of Chemistry and Center for Optical Materials Science and Engineering Technologies (COMSET), Clemson University, Clemson, SC (United States); Zhang, Xin; Dowben, P.A. [Department of Physics and Astronomy, University of Nebraska-Lincoln, Lincoln, NE (United States)

    2014-03-15

    Single crystals of thorium dioxide ThO{sub 2}, grown by the hydrothermal growth technique, have been investigated by ultraviolet photoemission spectroscopy (UPS), inverse photoemission spectroscopy (IPES), and L{sub 3}, M{sub 3}, M{sub 4}, and M{sub 5} X-ray absorption near edge spectroscopy (XANES). The experimental band gap for large single crystals has been determined to be 6 eV to 7 eV, from UPS and IPES, in line with expectations. The combined UPS and IPES, place the Fermi level near the conduction band minimum, making these crystals n-type, with extensive band tailing, suggesting an optical gap in the region of 4.8 eV for excitations from occupied to unoccupied edge states. Hybridization between the Th 6d/5f bands with O 2p is strongly implicated. (copyright 2014 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  18. Crystal growth and transport properties of CuAlO2 single crystal

    Science.gov (United States)

    Brahimi, R.; Rekhila, G.; Trari, M.; Bessekhouad, Y.

    2014-12-01

    The transport properties of the delafossite CuAlO2 single crystal, grown by the flux method, are confined in ∞[AlO2] layers extending in the (001) plans. The dielectric properties are measured up to 490 K in the frequency range (102-105 Hz). The small variation of the dielectric loss tan(δ) is attributed to the wide space charge region. The linear plot log (conductivity) vs. 1000/ T follows an Arrhenius type law and the results are discussed in terms of electron hopping among localized states. The activation energy (0.18 eV) gives an effective mass of 16 m 0 indicating that the levels in the vicinity of the Fermi level are strongly localized. Hence, the increase of the conductivity (σ) results from a thermal activation of the mobility (μ300 K = 1.2 × 10-5 cm-2 V-1 s-1). The sign of hole like small polarons is that of p type carriers originating from oxygen intercalation. The thermopower is little temperature dependent and characteristic of non degenerate conductivity with a low holes concentration and a large concentration of surface states within the gap region.

  19. Interfacial dislocation motion and interactions in single-crystal superalloys

    Energy Technology Data Exchange (ETDEWEB)

    Liu, B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Raabe, D. [Max Planck Inst. fur Eisenforshung. Dusseldorf (Germany); Roters, F. [Max Planck Inst. fur Eisenforshung. Dusseldorf (Germany); Arsenlis, A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2014-10-01

    The early stage of high-temperature low-stress creep in single-crystal superalloys is characterized by the rapid development of interfacial dislocation networks. Although interfacial motion and dynamic recovery of these dislocation networks have long been expected to control the subsequent creep behavior, direct observation and hence in-depth understanding of such processes has not been achieved. Incorporating recent developments of discrete dislocation dynamics models, we simulate interfacial dislocation motion in the channel structures of single-crystal superalloys, and investigate how interfacial dislocation motion and dynamic recovery are affected by interfacial dislocation interactions and lattice misfit. Different types of dislocation interactions are considered: self, collinear, coplanar, Lomer junction, glissile junction, and Hirth junction. The simulation results show that strong dynamic recovery occurs due to the short-range reactions of collinear annihilation and Lomer junction formation. The misfit stress is found to induce and accelerate dynamic recovery of interfacial dislocation networks involving self-interaction and Hirth junction formation, but slow down the steady interfacial motion of coplanar and glissile junction forming dislocation networks. The insights gained from these simulations on high-temperature low-stress creep of single-crystal superalloys are also discussed.

  20. Physical properties of CuAlO 2 single crystal

    Science.gov (United States)

    Brahimi, R.; Bellal, B.; Bessekhouad, Y.; Bouguelia, A.; Trari, M.

    2008-09-01

    CuAlO 2 single crystal elaborated by the flux method is a narrow band gap semiconductor crystallizing in the delafossite structure (SG R3¯m). Oxygen insertion in the layered lattice generates p-type conductivity where most holes are trapped in surface-polaron states. The detailed photoelectrochemical characterization and electrochemical impedance spectroscopy (EIS) have been reported for the first time on the single crystal. The study is confined in the basal plan and reversible oxygen insertion is evidenced from the intensity potential characteristics. The oxide is characterized by an excellent chemical stability; the semi-logarithmic plot gave a corrosion potential of-0.82 V SCE and an exchange current density of 0.022 μA cm -2 in KCl (0.5 M) electrolyte. The capacitance measurement ( C-2- V) shows a linear behavior from which a flat band potential of +0.42 V SCE and a doping density NA of 10 16 cm -3 have been determined. The valence band, located at 5.24 eV (0.51 V SCE) below vacuum, is made up of Cu-3d orbital. The Nyquist plot exhibits a pseudo-semicircle whose center is localized below the real axis with an angle of 20°. This can be attributed to a single relaxation time of the electrical equivalent circuit and a constant phase element (CPE). The absence of straight line indicates that the process is under kinetic control.

  1. Constitutive Model for an FCC Single-Crystal Material

    Institute of Scientific and Technical Information of China (English)

    DING Zhi-ping; LIU Yi-lun; YIN Ze-yong; YANG Zhi-guo; CHENG Xiao-ming

    2006-01-01

    Talking into account the effects that the components of tension stresses couple with components of torsion stresses when off-axis loads are applied to orthotropic materials.Hill's yield criterion for plastically orthotropic solids is modified by adding an invariant that is composed of the product item of quadratic components of the deviatoric siress tensor,and a new yield criteflon is put forward in terms of the characteristics of the face-centered cubic(FCC) single-crystal material.The correlation of prediction and experiments is very good.and the new criterion is used to predict the yield stresses of an intemal single-crystal,Nickel-based superalloy,DD3,which is more accurate than that Of Hill's at 760°C.Equivalent stress and strain that adapt to the new criterion are defined.Thinking of the yield function as a plastic potential function from the associated flow rule.the elastic-plastic constitutive model for the FCC single-crystal material is constructed,and the corresponding elastic-plastic matrix iseduced.The new yield criterion and its equivalent stress and strain will be reduced to Von Mises' yield criterion and corresponding equivalent stress and strain for isotropic materials.

  2. Chiral multichromic single crystals for optical devices (LDRD 99406).

    Energy Technology Data Exchange (ETDEWEB)

    Kemp, Richard Alan; Felix, Ana M. (University of New Mexico, Albuquerque, NM)

    2006-12-01

    This report summarizes our findings during the study of a novel system that yields multi-colored materials as products. This system is quite unusual as it leads to multi-chromic behavior in single crystals, where one would expect that only a single color would exist. We have speculated that these novel solids might play a role in materials applications such as non-linear optics, liquid crystal displays, piezoelectric devices, and other similar applications. The system examined consisted of a main-group alkyl compound (a p block element such as gallium or aluminum) complexed with various organic di-imines. The di-imines had substituents of two types--either alkyl or aromatic groups attached to the nitrogen atoms. We observed that single crystals, characterized by X-ray crystallography, were obtained in most cases. Our research during January-July, 2006, was geared towards understanding the factors leading to the multi-chromic nature of the complexes. The main possibilities put forth initially considered (a) the chiral nature of the main group metal, (b) possible reduction of the metal to a lower-valent, radical state, (c) the nature of the ligand(s) attached to the main group metal, and (d) possible degradation products of the ligand leading to highly-colored products. The work carried out indicates that the most likely explanation considered involves degradation of the aromatic ligands (a combination of (c) and (d)), as the experiments performed can clearly rule out (a) and (b).

  3. Single crystal plasticity by modeling dislocation density rate behavior

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, Benjamin L [Los Alamos National Laboratory; Bronkhorst, Curt [Los Alamos National Laboratory; Beyerlein, Irene [Los Alamos National Laboratory; Cerreta, E. K. [Los Alamos National Laboratory; Dennis-Koller, Darcie [Los Alamos National Laboratory

    2010-12-23

    The goal of this work is to formulate a constitutive model for the deformation of metals over a wide range of strain rates. Damage and failure of materials frequently occurs at a variety of deformation rates within the same sample. The present state of the art in single crystal constitutive models relies on thermally-activated models which are believed to become less reliable for problems exceeding strain rates of 10{sup 4} s{sup -1}. This talk presents work in which we extend the applicability of the single crystal model to the strain rate region where dislocation drag is believed to dominate. The elastic model includes effects from volumetric change and pressure sensitive moduli. The plastic model transitions from the low-rate thermally-activated regime to the high-rate drag dominated regime. The direct use of dislocation density as a state parameter gives a measurable physical mechanism to strain hardening. Dislocation densities are separated according to type and given a systematic set of interactions rates adaptable by type. The form of the constitutive model is motivated by previously published dislocation dynamics work which articulated important behaviors unique to high-rate response in fcc systems. The proposed material model incorporates thermal coupling. The hardening model tracks the varying dislocation population with respect to each slip plane and computes the slip resistance based on those values. Comparisons can be made between the responses of single crystals and polycrystals at a variety of strain rates. The material model is fit to copper.

  4. Single mode dye-doped polymer photonic crystal lasers

    DEFF Research Database (Denmark)

    Christiansen, Mads Brøkner; Buss, Thomas; Smith, Cameron

    2010-01-01

    Dye-doped polymer photonic crystal (PhC) lasers fabricated by combined nanoimprint and photolithography are studied for their reproducibility and stability characteristics. We introduce a phase shift in the PhC lattice that substantially improves the yield of single wavelength emission. Single mode...... emission and reproducibility of laser characteristics are important if the lasers are to be mass produced in, e. g., optofluidic sensor chips. The fabrication yield is above 85% with highly reproducible wavelengths (within 0.5%), and the temperature dependence on the wavelength is found to be -0.045 or -0...

  5. Diamond turning of Si and Ge single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Blake, P.; Scattergood, R.O.

    1988-12-01

    Single-point diamond turning studies have been completed on Si and Ge crystals. A new process model was developed for diamond turning which is based on a critical depth of cut for plastic flow-to-brittle fracture transitions. This concept, when combined with the actual machining geometry for single-point turning, predicts that {open_quotes}ductile{close_quotes} machining is a combined action of plasticity and fracture. Interrupted cutting experiments also provide a meant to directly measure the critical depth parameter for given machining conditions.

  6. Crystal Growth of Ca3Nb(Ga1−xAlx3Si2O14 Piezoelectric Single Crystals with Various Al Concentrations

    Directory of Open Access Journals (Sweden)

    Yuui Yokota

    2015-08-01

    Full Text Available Ca3Nb(Ga1−xAlx3Si2O14 (CNGAS single crystals with various Al concentrations were grown by a micro-pulling-down (µ-PD method and their crystal structures, chemical compositions, crystallinities were investigated. CNGAS crystals with x = 0.2, 0.4 and 0.6 indicated a single phase of langasite-type structure without any secondary phases. In contrast, the crystals with x = 0.8 and 1 included some secondary phases in addition to the langasite-type phase. Lattice parameters, a- and c-axes lengths, of the langasite-type phase systematically decreased with an increase of Al concentration. The results of chemical composition analysis revealed that the actual Al concentrations in as-grown crystals were almost consistent with the nominal compositions. In addition, there was no large segregation of each cation along the growth direction.

  7. Crystal Growth of Ca3Nb(Ga1−xAlx)3Si2O14 Piezoelectric Single Crystals with Various Al Concentrations

    Science.gov (United States)

    Yokota, Yuui; Kudo, Tetsuo; Ohashi, Yuji; Medvedev, Andrey; Kurosawa, Shunsuke; Kamada, Kei; Yoshikawa, Akira

    2015-01-01

    Ca3Nb(Ga1−xAlx)3Si2O14 (CNGAS) single crystals with various Al concentrations were grown by a micro-pulling-down (µ-PD) method and their crystal structures, chemical compositions, crystallinities were investigated. CNGAS crystals with x = 0.2, 0.4 and 0.6 indicated a single phase of langasite-type structure without any secondary phases. In contrast, the crystals with x = 0.8 and 1 included some secondary phases in addition to the langasite-type phase. Lattice parameters, a- and c-axes lengths, of the langasite-type phase systematically decreased with an increase of Al concentration. The results of chemical composition analysis revealed that the actual Al concentrations in as-grown crystals were almost consistent with the nominal compositions. In addition, there was no large segregation of each cation along the growth direction. PMID:28793525

  8. Influence of solvents on the habit modification of alpha lactose monohydrate single crystals

    Science.gov (United States)

    Parimaladevi, P.; Srinivasan, K.

    2013-02-01

    Restricted evaporation of solvent method was adopted for the growth of alpha lactose monohydrate single crystals from different solvents. The crystal habits of grown crystals were analysed. The form of crystallization was confirmed by powder x-ray diffraction analysis. Thermal behaviour of the grown crystals was studied by using differential scanning calorimetry.

  9. Acquisition of Single Crystal Growth and Characterization Equipment

    Energy Technology Data Exchange (ETDEWEB)

    Maple, M. Brian; Zocco, Diego A.

    2008-12-09

    Final Report for DOE Grant No. DE-FG02-04ER46178 'Acquisition of Single Crystal Growth and Characterization Equipment'. There is growing concern in the condensed matter community that the need for quality crystal growth and materials preparation laboratories is not being met in the United States. It has been suggested that there are too many researchers performing measurements on too few materials. As a result, many user facilities are not being used optimally. The number of proficient crystal growers is too small. In addition, insufficient attention is being paid to the enterprise of finding new and interesting materials, which is the driving force behind much of condensed matter research and, ultimately, technology. While a detailed assessment of this situation is clearly needed, enough evidence of a problem already exists to compel a general consensus that the situation must be addressed promptly. This final report describes the work carried out during the last four years in our group, in which a state-of-the-art single crystal growth and characterization facility was established for the study of novel oxides and intermetallic compounds of rare earth, actinide and transition metal elements. Research emphasis is on the physics of superconducting (SC), magnetic, heavy fermion (HF), non-Fermi liquid (NFL) and other types of strongly correlated electron phenomena in bulk single crystals. Properties of these materials are being studied as a function of concentration of chemical constituents, temperature, pressure, and magnetic field, which provide information about the electronic, lattice, and magnetic excitations at the root of various strongly correlated electron phenomena. Most importantly, the facility makes possible the investigation of material properties that can only be achieved in high quality bulk single crystals, including magnetic and transport phenomena, studies of the effects of disorder, properties in the clean limit, and spectroscopic and

  10. Self-templated synthesis of single-crystal and single-domain ferroelectric nanoplates

    KAUST Repository

    Chao, Chunying

    2012-08-15

    Free-standing single-crystal PbTiO 3 nanoplates (see picture) were synthesized by a facile hydrothermal method. A "self-templated" crystal growth is presumed to lead to the formation of the PbTiO 3 nanoplates, which have ferroelectric single-domain structures, whose polarization areas can be manipulated by writing and reading. The nanoplates are also effective catalysts for the oxidation of carbon monoxide. © 2012 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  11. Effect of Solidification Condition on Microstructure and Mechanical Properties of Single Crystal Superalloy

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    CMSX-2 single crystals with different primary dendrite arm spacing were obtained on directional solidification apparatus with high temperature gradient (250 K/cm). The microstructure and elevated temperature stress rupture properties of these single crystals were examined and analyzed.

  12. Advanced piezoelectric single crystal based transducers for naval sonar applications

    Science.gov (United States)

    Snook, Kevin A.; Rehrig, Paul W.; Hackenberger, Wesley S.; Jiang, Xiaoning; Meyer, Richard J., Jr.; Markley, Douglas

    2006-03-01

    Transducers incorporating single crystal piezoelectric Pb(Mg 1/3Nb 2/3) x-1Ti xO 3 (PMN-PT) exhibit significant advantages over ceramic piezoelectrics such as PZT, including both high electromechanical coupling (k 33 > 90%) and piezoelectric coefficients (d 33 > 2000 pC/N). Conventional orientation gives inherently larger bandwidth and output power than PZT ceramics, however, the anisotropy of the crystal also allows for tailoring of the performance by orienting the crystal along different crystallographic axes. This attribute combined with composition refinements can be used to improve thermal or mechanical stability, which is important in high power, high duty cycle sonar applications. By utilizing the "31" resonance mode, the high power performance of PMN-PT can be improved over traditional "33" mode single crystal transducers, due to an improved aspect ratio. Utilizing novel geometries, effective piezoelectric constants of -600 pC/N to -1200 pC/N have been measured. The phase transition point induced by temperature, pre-stress or field is close to that in the "33" mode, and since the prestress is applied perpendicular to the poling direction in "31" mode elements, they exhibit lower loss and can therefore be driven harder. The high power characteristics of tonpilz transducers can also be affected by the composition of the PMN-PT crystal. TRS modified the composition of PMN-PT to improve the thermal stability of the material, while keeping the loss as low as possible. Three dimensional modeling shows that the useable bandwidth of these novel compositions nearly equals that of conventional PMN-PT. A decrease in the source level of up to 6 dB was calculated, which can be compensated for by the higher drive voltages possible.

  13. A High-Rate, Single-Crystal Model including Phase Transformations, Plastic Slip, and Twinning

    Energy Technology Data Exchange (ETDEWEB)

    Addessio, Francis L. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division; Bronkhorst, Curt Allan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division; Bolme, Cynthia Anne [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Explosive Science and Shock Physics Division; Brown, Donald William [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Materials Science and Technology Division; Cerreta, Ellen Kathleen [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Materials Science and Technology Division; Lebensohn, Ricardo A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Materials Science and Technology Division; Lookman, Turab [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division; Luscher, Darby Jon [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division; Mayeur, Jason Rhea [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Theoretical Division; Morrow, Benjamin M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Materials Science and Technology Division; Rigg, Paulo A. [Washington State Univ., Pullman, WA (United States). Dept. of Physics. Inst. for Shock Physics

    2016-08-09

    An anisotropic, rate-­dependent, single-­crystal approach for modeling materials under the conditions of high strain rates and pressures is provided. The model includes the effects of large deformations, nonlinear elasticity, phase transformations, and plastic slip and twinning. It is envisioned that the model may be used to examine these coupled effects on the local deformation of materials that are subjected to ballistic impact or explosive loading. The model is formulated using a multiplicative decomposition of the deformation gradient. A plate impact experiment on a multi-­crystal sample of titanium was conducted. The particle velocities at the back surface of three crystal orientations relative to the direction of impact were measured. Molecular dynamics simulations were conducted to investigate the details of the high-­rate deformation and pursue issues related to the phase transformation for titanium. Simulations using the single crystal model were conducted and compared to the high-­rate experimental data for the impact loaded single crystals. The model was found to capture the features of the experiments.

  14. Rapid fabrication of large area binary polystyrene colloidal crystals

    Science.gov (United States)

    Luo, Chun-Li; Yang, Rui-Xia; Yan, Wei-Guo; Zhao, Jian; Yang, Guang-Wu; Jia, Guo-Zhi

    2016-07-01

    Binary colloidal crystals (BCCs) possess great potentials in tuning material and optical properties. In this paper, the combination of interface transferred method and spin-coating method is used to fabricate BCCs with different patterns via controlling the size ratio of small (S) to large (L) colloidal spheres and the spin speeds. It is found that BCCs formed LS2, LS4 and LS6 by changing the size ratio. In addition, there are some new and complicated structures, such as LS12, Janus arrays, formed at the low spin speed. This simple assembly method has potential to allow for the creation of optical metmaterials and the plasmonic structures with chiral optical properties.

  15. Employing a cylindrical single crystal in gas-surface dynamics.

    Science.gov (United States)

    Hahn, Christine; Shan, Junjun; Liu, Ying; Berg, Otto; Kleijn, Aart W; Juurlink, Ludo B F

    2012-03-21

    We describe the use of a polished, hollow cylindrical nickel single crystal to study effects of step edges on adsorption and desorption of gas phase molecules. The crystal is held in an ultra-high vacuum apparatus by a crystal holder that provides axial rotation about a [100] direction, and a crystal temperature range of 89 to 1100 K. A microchannel plate-based low energy electron diffraction/retarding field Auger electron spectrometer (AES) apparatus identifies surface structures present on the outer surface of the cylinder, while a separate double pass cylindrical mirror analyzer AES verifies surface cleanliness. A supersonic molecular beam, skimmed by a rectangular slot, impinges molecules on a narrow longitudinal strip of the surface. Here, we use the King and Wells technique to demonstrate how surface structure influences the dissociation probability of deuterium at various kinetic energies. Finally, we introduce spatially-resolved temperature programmed desorption from areas exposed to the supersonic molecular beam to show how surface structures influence desorption features.

  16. Magnesium single crystals for biomedical applications grown in vertical Bridgman apparatus

    Science.gov (United States)

    Salunke, Pravahan; Joshi, Madhura; Chaswal, Vibhor; Zhang, Guangqi; Rosenbaum, Leonard A.; Dowling, Kevin; Decker, Paul; Shanov, Vesselin

    2016-10-01

    This paper describes successful efforts to design, build, test, and utilize a single crystal apparatus using the Bridgman approach for directional solidification. The created instrument has been successfully tested to grow magnesium single crystals from melt. Preliminary mechanical tests carried out on these single crystals indicate unique and promising properties, which can be harnessed for biomedical applications.

  17. Organic single-crystal light-emitting field-effect transistors

    NARCIS (Netherlands)

    Hotta, Shu; Yamao, Takeshi; Bisri, Satria Zulkarnaen; Takenobu, Taishi; Iwasa, Yoshihiro

    2014-01-01

    Growth and characterisation of single crystals constitute a major field of materials science. In this feature article we overview the characteristics of organic single-crystal light-emitting field-effect transistors (OSCLEFETs). The contents include the single crystal growth of organic semiconductor

  18. Room-Temperature Tensile Behavior of Oriented Tungsten Single Crystals with Rhenium in Dilute Solid Solution

    Science.gov (United States)

    1966-01-01

    SINGLE CRYSTALS WITH RHENIUM IN DILUTE SOLID SOLUTION Sby M. Garfinkle Lewis Research Center Cleveland, Ohio 20060516196 NATIONAL AERONAUTICS AND...WITH RHENIUM IN DILUTE SOLID SOLUTION By M. Garfinkle Lewis Research Center Cleveland, Ohio NATIONAL AERONAUTICS AND SPACE ADMINISTRATION For sale by...ORIENTED TUNGSTEN SINGLE CRYSTALS WITH RHENIUM IN DILUTE SOLID SOLUTION * by M. Garfinkle Lewis Research Center SUMMARY Tungsten single crystals

  19. Crystal structure and magnetization of a Co3B2O6 single crystal

    Science.gov (United States)

    Kazak, N. V.; Platunov, M. S.; Ivanova, N. B.; Knyazev, Yu. V.; Bezmaternykh, L. N.; Eremin, E. V.; Vasil'ev, A. D.; Bayukov, O. A.; Ovchinnikov, S. G.; Velikanov, D. A.; Zubavichus, Ya. V.

    2013-07-01

    The crystal structure and magnetic properties of Co3B2O6 single crystals are studied. Orthorhombic symmetry with space group Pnnm is detected at room temperature. The measurements of static magnetization and dynamic magnetic susceptibility reveal two magnetic anomalies at T 1 = 33 K and T 2 = 10 K and an easy-axis magnetic anisotropy. The effective magnetic moment indicates a high-spin state of the Co2+ ion. A spin-flop transition is found at low temperatures and H sf = 23 kOe. EXAFS spectra of the K-edge absorption of Co are recorded at various temperatures, the temperature-induced changes in the parameters of the local environment of cobalt are analyzed, and the effective Co-Co and Co-O distances are determined. The magnetic interactions in the crystal are analyzed in terms of an indirect coupling model.

  20. Strength anomaly in B2 FeAl single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Yoshimi, K.; Hanada, S.; Yoo, M.H. [Oak Ridge National Lab., TN (United States); Matsumoto, N. [Tohoku Univ. (Japan). Graduate School

    1994-12-31

    Strength and deformation microstructure of B2 Fe-39 and 48%Al single crystals (composition given in atomic percent), which were fully annealed to remove frozen-in vacancies, have been investigated at temperatures between room temperature and 1073K. The hardness of as-homogenized Fe-48Al is higher than that of as-homogenized Fe-39Al while after additional annealing at 698K the hardness of Fe-48Al becomes lower than that of Fe-39Al. Fe-39Al single crystals slowly cooled after homogenizing at a high temperature were deformed in compression as a function of temperature and crystal orientation. A peak of yield strength appears around 0.5T{sub m} (T{sub m} = melting temperature). The orientation dependence of the critical resolved shear stress does not obey Schmid`s law even at room temperature and is quite different from that of b.c.c. metals and B2 intermetallics at low temperatures. At the peak temperature slip transition from <111>-type to <001>-type is found to occur macroscopically and microscopically, while it is observed in TEM that some of the [111] dislocations decompose into [101] and [010] on the (1096I) plane below the peak temperature. The physical sources for the positive temperature dependence of yield stress of B2 FeAl are discussed based on the obtained results.

  1. Growth and Characterization of Lead-free Piezoelectric Single Crystals

    Directory of Open Access Journals (Sweden)

    Philippe Veber

    2015-11-01

    Full Text Available Lead-free piezoelectric materials attract more and more attention owing to the environmental toxicity of lead-containing materials. In this work, we review our first attempts of single crystal grown by the top-seeded solution growth method of BaTiO3 substituted with zirconium and calcium (BCTZ and (K0.5Na0.5NbO3 substituted with lithium, tantalum, and antimony (KNLSTN. The growth methodology is optimized in order to reach the best compositions where enhanced properties are expected. Chemical analysis and electrical characterizations are presented for both kinds of crystals. The compositionally-dependent electrical performance is investigated for a better understanding of the relationship between the composition and electrical properties. A cross-over from relaxor to ferroelectric state in BCTZ solid solution is evidenced similar to the one reported in ceramics. In KNLSTN single crystals, we observed a substantial evolution of the orthorhombic-to-tetragonal phase transition under minute composition changes.

  2. Structural peculiarities of single crystal diamond needles of nanometer thickness

    Science.gov (United States)

    Orekhov, Andrey S.; Tuyakova, Feruza T.; Obraztsova, Ekaterina A.; Loginov, Artem B.; Chuvilin, Andrey L.; Obraztsov, Alexander N.

    2016-11-01

    Diamond is attractive for various applications due to its unique mechanical and optical properties. In particular, single crystal diamond needles with high aspect ratios and sharp apexes of nanometer size are demanded for different types of optical sensors including optically sensing tip probes for scanning microscopy. This paper reports on electron microscopy and Raman spectroscopy characterization of the diamond needles having geometrically perfect pyramidal shapes with rectangular atomically flat bases with (001) crystallography orientation, 2-200 nm sharp apexes, and with lengths from about 10-160 μm. The needles were produced by selective oxidation of (001) textured polycrystalline diamond films grown by chemical vapor deposition. Here we study the types and distribution of defects inside and on the surface of the single crystal diamond needles. We show that sp3 type point defects are incorporated into the volume of the diamond crystal during growth, while the surface of the lateral facets is enriched by multiple extended defects. Nitrogen addition to the reaction mixture results in increase of the growth rate on {001} facets correlated with the rise in the concentration of sp3 type defects.

  3. Structural and magnetic studies on copper succinate dihydrate single crystals

    Indian Academy of Sciences (India)

    M P BINITHA; P P PRADYUMNAN

    2017-09-01

    Single crystals of copper succinate dihydrate were grown in silica gel by slow diffusion of copper chloride tosodium metasilicate gel impregnated with succinic acid. The grown crystal was subjected to single crystal X-ray diffractionstudies. In its structure each copper atom is penta co-ordinated to oxygen atoms of four succinate oxygens and oxygenof co-ordinated water molecule. The four bis-bidendate succinate anions form syn–syn bridges among two copper atomsto form a polymeric two-dimensional chain. From room temperature vibrating sample magnetometer (VSM) studies themagnetic moment of the material is calculated as 1.35 Bohr magneton (BM), indicating antiferromagnetic interaction betweencopper atoms and can be explained as due to the orbital overlap of the bridging ligand and the two copper atoms in syn-synorientation. A strong bonding of the magnetic orbital of equatorially oriented Cu atom on both sides of the exchange pathway(Cu–O-C-O–Cu) leads to the anti-ferromagnetic interaction.

  4. Single-Photon Source for Quantum Information Based on Single Dye Molecule Fluorescence in Liquid Crystal Host

    Energy Technology Data Exchange (ETDEWEB)

    Lukishova, S.G.; Knox, R.P.; Freivald, P.; McNamara, A.; Boyd, R.W.; Stroud, Jr., C.R.; Schmid, A.W.; Marshall, K.L.

    2006-08-18

    This paper describes a new application for liquid crystals: quantum information technology. A deterministically polarized single-photon source that efficiently produces photons exhibiting antibunching is a pivotal hardware element in absolutely secure quantum communication. Planar-aligned nematic liquid crystal hosts deterministically align the single dye molecules which produce deterministically polarized single (antibunched) photons. In addition, 1-D photonic bandgap cholesteric liquid crystals will increase single-photon source efficiency. The experiments and challenges in the observation of deterministically polarized fluorescence from single dye molecules in planar-aligned glassy nematic-liquid-crystal oligomer as well as photon antibunching in glassy cholesteric oligomer are described for the first time.

  5. Non-Resonant Magnetoelectric Energy Harvesting Utilizing Phase Transformation in Relaxor Ferroelectric Single Crystals

    Directory of Open Access Journals (Sweden)

    Peter Finkel

    2015-12-01

    Full Text Available Recent advances in phase transition transduction enabled the design of a non-resonant broadband mechanical energy harvester that is capable of delivering an energy density per cycle up to two orders of magnitude larger than resonant cantilever piezoelectric type generators. This was achieved in a [011] oriented and poled domain engineered relaxor ferroelectric single crystal, mechanically biased to a state just below the ferroelectric rhombohedral (FR-ferroelectric orthorhombic (FO phase transformation. Therefore, a small variation in an input parameter, e.g., electrical, mechanical, or thermal will generate a large output due to the significant polarization change associated with the transition. This idea was extended in the present work to design a non-resonant, multi-domain magnetoelectric composite hybrid harvester comprised of highly magnetostrictive alloy, [Fe81.4Ga18.6 (Galfenol or TbxDy1-xFe2 (Terfenol-D], and lead indium niobate–lead magnesium niobate–lead titanate (PIN-PMN-PT domain engineered relaxor ferroelectric single crystal. A small magnetic field applied to the coupled device causes the magnetostrictive element to expand, and the resulting stress forces the phase change in the relaxor ferroelectric single crystal. We have demonstrated high energy conversion in this magnetoelectric device by triggering the FR-FO transition in the single crystal by a small ac magnetic field in a broad frequency range that is important for multi-domain hybrid energy harvesting devices.

  6. Shape memory effects in [001] Ni55Fe18Ga27 single crystal

    Science.gov (United States)

    Belyaev, S.; Resnina, N.; Nikolaev, V.; Timashov, R.; Gazizullina, A.; Sibirev, A.; Averkin, A.; Krymov, V.

    2017-09-01

    Shape memory effects in Ni55Fe18Ga27 single crystal grown along the [001] direction by the Czochralski method was studied. It was found that deformation of [001] single crystal in the martensite state was realised via reorientation of 10 M martensite and stress-induced transformations: 10 M → 14 M → L10. On unloading, the reverse L10 → 14 M → 10 M transformations occurred and a large unelastic strain recovered. On heating, the oriented 10 M martensite transformed to the L21 austenite phase and the shape memory effect was observed. An increase in preliminary strain resulted in an increase in the shape memory effect value to 4.6%. The [001] Ni55Fe18Ga27 alloy single crystal demonstrated transformation plasticity and shape memory effects on cooling and heating under stress however, an increase in stress decreased the values of these effects. This was caused by stress-induced martensite appearing in the sample during loading in the austenite state, which decreased the volume of the austenite phase that could undergo the martensitic transformation on cooling. The [001] Ni55Fe18Ga27 alloy single crystal demonstrated a two-way shape memory effect and its value depended on the residual strain in a non-monotonic way and the maximum recoverable strain was 0.7%.

  7. Structure and Growth Control of Organic–Inorganic Halide Perovskites for Optoelectronics: From Polycrystalline Films to Single Crystals

    Science.gov (United States)

    Chen, Yani; He, Minhong; Peng, Jiajun; Sun, Yong

    2016-01-01

    Recently, organic–inorganic halide perovskites have sparked tremendous research interest because of their ground‐breaking photovoltaic performance. The crystallization process and crystal shape of perovskites have striking impacts on their optoelectronic properties. Polycrystalline films and single crystals are two main forms of perovskites. Currently, perovskite thin films have been under intensive investigation while studies of perovskite single crystals are just in their infancy. This review article is concentrated upon the control of perovskite structures and growth, which are intimately correlated for improvements of not only solar cells but also light‐emitting diodes, lasers, and photodetectors. We begin with the survey of the film formation process of perovskites including deposition methods and morphological optimization avenues. Strategies such as the use of additives, thermal annealing, solvent annealing, atmospheric control, and solvent engineering have been successfully employed to yield high‐quality perovskite films. Next, we turn to summarize the shape evolution of perovskites single crystals from three‐dimensional large sized single crystals, two‐dimensional nanoplates, one‐dimensional nanowires, to zero‐dimensional quantum dots. Siginificant functions of perovskites single crystals are highlighted, which benefit fundamental studies of intrinsic photophysics. Then, the growth mechanisms of the previously mentioned perovskite crystals are unveiled. Lastly, perspectives for structure and growth control of perovskites are outlined towards high‐performance (opto)electronic devices.

  8. Structure and Growth Control of Organic-Inorganic Halide Perovskites for Optoelectronics: From Polycrystalline Films to Single Crystals.

    Science.gov (United States)

    Chen, Yani; He, Minhong; Peng, Jiajun; Sun, Yong; Liang, Ziqi

    2016-04-01

    Recently, organic-inorganic halide perovskites have sparked tremendous research interest because of their ground-breaking photovoltaic performance. The crystallization process and crystal shape of perovskites have striking impacts on their optoelectronic properties. Polycrystalline films and single crystals are two main forms of perovskites. Currently, perovskite thin films have been under intensive investigation while studies of perovskite single crystals are just in their infancy. This review article is concentrated upon the control of perovskite structures and growth, which are intimately correlated for improvements of not only solar cells but also light-emitting diodes, lasers, and photodetectors. We begin with the survey of the film formation process of perovskites including deposition methods and morphological optimization avenues. Strategies such as the use of additives, thermal annealing, solvent annealing, atmospheric control, and solvent engineering have been successfully employed to yield high-quality perovskite films. Next, we turn to summarize the shape evolution of perovskites single crystals from three-dimensional large sized single crystals, two-dimensional nanoplates, one-dimensional nanowires, to zero-dimensional quantum dots. Siginificant functions of perovskites single crystals are highlighted, which benefit fundamental studies of intrinsic photophysics. Then, the growth mechanisms of the previously mentioned perovskite crystals are unveiled. Lastly, perspectives for structure and growth control of perovskites are outlined towards high-performance (opto)electronic devices.

  9. Unusually Large Young's Muduli of Amino Acid Molecular Crystals

    Science.gov (United States)

    Azuri, Ido; Meirzadeh, Elena; Ehre, David; Cohen, Sidney R.; Rappe, Andrew M.; Lahav, Meir; Lubomirsky, Igor; Kronik, Leeor

    Young's moduli of selected amino acid molecular crystals were studied both experimentally and computationally using nanoindentation and dispersion-corrected density functional theory. The Young modulus is found to be strongly facet-dependent, with some facets exhibiting exceptionally high values (as large as 44 GPa). The magnitude of Young's modulus is strongly correlated with the relative orientation between the underlying hydrogen-bonding network and the measured facet. Furthermore, we show computationally that the Young modulus can be as large as 70-90 GPa if facets perpendicular to the primary direction of the hydrogen-bonding network can be stabilized. This value is remarkably high for a molecular solid and suggests the design of hydrogen-bond networks as a route for rational design of ultra-stiff molecular solids. Angew. Chem. Int. Ed.. doi: 10.1002/anie.201505813.

  10. Electronic properties of graphene-single crystal diamond heterostructures

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Fang; Thuong Nguyen, Thuong; Golsharifi, Mohammad; Amakubo, Suguru; Jackman, Richard B., E-mail: r.jackman@ucl.ac.uk [London Centre for Nanotechnology and Department of Electronic and Electrical Engineering, University College London, 17-19 Gordon Street, London WC1H 0AH (United Kingdom); Loh, K. P. [Department of Chemistry, National University of Singapore, 3 Science Drive, Singapore 117543 (Singapore)

    2013-08-07

    Single crystal diamond has been used as a substrate to support single layer graphene grown by chemical vapor deposition methods. It is possible to chemically functionalise the diamond surface, and in the present case H-, F-, O-, and N-group have been purposefully added prior to graphene deposition. The electronic properties of the resultant heterostructures vary strongly; a p-type layer with good mobility and a band gap of ∼0.7 eV is created when H-terminated diamond layers are used, whilst a layer with more metallic-like character (high carrier density and low carrier mobility) arises when N(O)-terminations are introduced. Since it is relatively easy to pattern these functional groups on the diamond surface, this suggests that this approach may offer an exciting route to 2D device structures on single layer graphene sheets.

  11. Laser on single-crystal ZnSe:Fe2+ with high pulse radiation energy at room temperature

    Science.gov (United States)

    Firsov, K. N.; Frolov, M. P.; Gavrishchuk, E. M.; Kazantsev, S. Yu; Kononov, I. G.; Korostelin, Yu V.; Maneshkin, A. A.; Velikanov, S. D.; Yutkin, I. M.; Zaretsky, N. A.; Zotov, E. A.

    2016-01-01

    A laser on single-crystal ZnSe:Fe2+ was investigated at room temperature. Pumping of the laser was performed by a pulsed electrodischarge HF laser. In experiments, the spot diameter of HF laser radiation incident to the surface of the crystal varied from 5.6 to 17 mm. Generation energy of ~1.2 J was obtained and the efficiency with respect to the energy arriving at the crystal was η in  ≈  25%. The slope efficiency with respect to the energy absorbed in the crystal at large spot dimensions was η slope  =  45%.

  12. α-Lead tellurite from single-crystal data.

    Science.gov (United States)

    Zavodnik, Valery E; Ivanov, Sergey A; Stash, Adam I

    2008-02-06

    The crystal structure of the title compound, α-PbTeO(3) (PTO), has been reported previously by Mariolacos [Anz. Oesterr. Akad. Wiss. Math. Naturwiss. Kl. (1969), 106, 128-130], refined on powder data. The current determination at room temperature from data obtained from single crystals grown by the Czochralski method shows a significant improvement in the precision of the geometric parameters when all atoms have been refined anisotropically. The selection of a centrosymmetric (C2/c) structure model was confirmed by the second harmonic generation test. The asymmetric unit contains three formula units. The structure of PTO is built up of three types of distorted [PbO(x)] polyhedra (x = 7 and 9) which share their O atoms with TeO(3) pyramidal units. These main anionic polyhedra are responsible for establishing the two types of tunnel required for the stereochemical activity of the lone pairs of the Pb(2+) and Te(4+) cations.

  13. α-Lead tellurite from single-crystal data

    Directory of Open Access Journals (Sweden)

    Adam I. Stash

    2008-03-01

    Full Text Available The crystal structure of the title compound, α-PbTeO3 (PTO, has been reported previously by Mariolacos [Anz. Oesterr. Akad. Wiss. Math. Naturwiss. Kl. (1969, 106, 128–130], refined on powder data. The current determination at room temperature from data obtained from single crystals grown by the Czochralski method shows a significant improvement in the precision of the geometric parameters when all atoms have been refined anisotropically. The selection of a centrosymmetric (C2/c structure model was confirmed by the second harmonic generation test. The asymmetric unit contains three formula units. The structure of PTO is built up of three types of distorted [PbOx] polyhedra (x = 7 and 9 which share their O atoms with TeO3 pyramidal units. These main anionic polyhedra are responsible for establishing the two types of tunnel required for the stereochemical activity of the lone pairs of the Pb2+ and Te4+ cations.

  14. Shape-memory effect in Co-Ni single crystal

    Institute of Scientific and Technical Information of China (English)

    周伟敏; 刘岩; 张少宗; 江伯鸿

    2004-01-01

    The thermal shape-memory effect at room temperature for Co-32% Ni(mass fraction) magnetic shape memory alloy of single crystal was presented. When compressing the sample along the [001] direction at room temperature, strain can be recovered to some extent during later heating and the recovery rate varies with the pre-strain.But no obvious recoverable strain can be obtained along other crystal directions. For the thermal-mechanical training of the sample along [001], the recovery strain decreases obviously during the second round of compress and nearly no recovery happens after the third round of compress. A possible mechanism based on reversible motions of Shockley partial dislocations was proposed.

  15. Water weakening in experimentally deformed milky quartz single crystals

    Science.gov (United States)

    Stunitz, H.; Thust, A.; Kilian, R.; Heilbronner, R.; Behrens, H.; Tarantola, A.; Fitz Gerald, J. D.

    2015-12-01

    Natural single crystals of quartz have been experimentally deformed in two orientations: (1) normal to one prism-plane, (2) In O+ orientation at temperatures of 900 and 1000°C, pressures of 1.0 and 1.5 GPa, and strain rates of ~1 x 10-6s-1. The starting material is milky quartz, consisting of dry quartz (H2O contents of recycling of H2O between FI´s, dislocation generation at very small fluid inclusions, incorporation of structurally bound H into dislocation cores, and release of H2O from dislocations back into FI´s during recovery. Cracking and crack healing play an important role in the recycling process and imply a close interrelationship between brittle and crystal plastic deformation. The H2O weakening by this process is of a disequilibrium nature and thus depends on the amount of H2O available.

  16. Multiband Effects on -FeSe single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Petrovic C.; Lei, H.; Graf, D.; Hu, R.; Ryu, H.; Choi, E.S.; Tozer, S.W.

    2012-03-01

    We present the upper critical fields {mu}{sub 0}H{sub c2}(T) and Hall effect in {beta}-FeSe single crystals. The {mu}{sub 0}H{sub c2}(T) increases as the temperature is lowered for fields applied parallel and perpendicular to (101), the natural growth facet of the crystal. The {mu}{sub 0}H{sub c2}(T) for both field directions and the anisotropy at low temperature increase under pressure. Hole carriers are dominant at high magnetic fields. However, the contribution of electron-type carriers is significant at low fields and low temperature. Our results show that multiband effects dominate {mu}{sub 0}H{sub c2}(T) and electronic transport in the normal state.

  17. Monitoring Lidocaine Single-Crystal Dissolution by Ultraviolet Imaging

    DEFF Research Database (Denmark)

    Ostergaard, Jesper; Ye, Fengbin; Rantanen, Jukka

    2011-01-01

    Dissolution critically affects the bioavailability of Biopharmaceutics Classification System class 2 compounds. When unexpected dissolution behaviour occurs, detailed studies using high information content technologies are warranted. In the present study, an evaluation of real‐time ultraviolet (UV......) imaging for conducting single‐crystal dissolution studies was performed. Using lidocaine as a model compound, the aim was to develop a setup capable of monitoring and quantifying the dissolution of lidocaine into a phosphate buffer, pH 7.4, under stagnant conditions. A single crystal of lidocaine...... was placed in the quartz dissolution cell and UV imaging was performed at 254 nm. Spatially and temporally resolved mapping of lidocaine concentration during the dissolution process was achieved from the recorded images. UV imaging facilitated the monitoring of lidocaine concentrations in the dissolution...

  18. Microhardness studies on nonlinear optical -alanine single crystals

    Indian Academy of Sciences (India)

    R Hanumantharao; S Kalainathan

    2013-06-01

    Vickers and Knoop microhardness tests were carried out on grown -alanine single crystals by slow evaporation technique over a load range of 10–50 g on selected broad (2 0 3) plane. Vickers (v) and Knoop (k) microhardness for the above loads were found to be in the range of 60–71 kg/mm2 and 35–47 kg/mm2, respectively. Vickers microhardness number (v) and Knoop microhardness number (k) were found to increase with increasing load. Meyer’s index number () calculated from v shows that the material belongs to the soft material category. Using Wooster’s empirical relation, the elastic stiffness constant (11) was calculated from Vickers hardness values. Young’s modulus was calculated using Knoop hardness values. Hardness anisotropy has been observed in accordance with the orientation of the crystal.

  19. Hybrid Ytterbium-doped large-mode-area photonic crystal fiber amplifier for long wavelengths

    DEFF Research Database (Denmark)

    Petersen, Sidsel Rübner; Alkeskjold, Thomas T.; Poli, Federica

    2012-01-01

    A large-mode-area Ytterbium-doped photonic crystal fiber amplifier with build-in gain shaping is presented. The fiber cladding consists of a hexagonal lattice of air holes, where three rows are replaced with circular high-index inclusions. Seven missing air holes define the large-mode-area core....... Light confinement is achieved by combined index and bandgap guiding, which allows for single-mode operation and gain shaping through distributed spectral filtering of amplified spontaneous emission. The fiber properties are ideal for amplification in the long wavelength regime of the Ytterbium gain...

  20. High Performance Large Mode-Area Ytterbium-doped Photonic Crystal Fiber for Fiber Lasers

    Energy Technology Data Exchange (ETDEWEB)

    Chen Wei; Lu Peixiang [Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan, 430074 (China); Li Shiyu; Wang Dongxiang, E-mail: chenwei@fiberhome.com.cn [State Key Laboratory of Optical Communication Technologies and Networks, Fiberhome Telecommunication Technologies Co. Ltd, 430074 (China)

    2011-02-01

    In this letter, large-mode-area double-cladding ytterbium-doped photonic crystal fiber was designed in theory and fabricated in practice. This fiber we have fabricated successfully has endless single mode operation performance and large inner-cladding numerical aperture of more than 0.75. The struts width between large air-holes in the outer-cladding is about 0.22 {mu}m. The photonic crystal fiber has a mode-area about 1465.7{mu}m{sup 2}. Due to the material being pure silica and air, such structures have excellent capacity to with-stand high temperature. The laser light can have very good beam quality, even diffraction-limited beam quality because of the single-mode core. This fabrication technical breakthrough of novelty high performance double-cladding ytterbium-doped photonic crystal fibers will give contributions to the high power fiber lasers and promote the progress of technology in the fields of high power lasers.

  1. Micromechanical Behavior of Single-Crystal Superalloy with Different Crystal Orientations by Microindentation

    Directory of Open Access Journals (Sweden)

    Jinghui Li

    2015-01-01

    Full Text Available In order to investigate the anisotropic micromechanical properties of single-crystal nickel-based superalloy DD99 of four crystallographic orientations, (001, (215, (405, and (605, microindentation test (MIT was conducted with different loads and loading velocities by a sharp Berkovich indenter. Some material parameters reflecting the micromechanical behavior of DD99, such as microhardness H, Young’s modulus E, yield stress σy, strain hardening component n, and tensile strength σb, can be obtained from load-displacement relations. H and E of four different crystal planes evidently decrease with the increase of h. The reduction of H is due to dislocation hardening while E is related to interplanar spacing and crystal variable. σy of (215 is the largest among four crystal planes, followed by (605, and (001 has the lowest value. n of (215 is the lowest, followed by (605, and that of (001 is the largest. Subsequently, a simplified elastic-plastic material model was employed for 3D microindentation simulation of DD99 with various crystal orientations. The simulation results agreed well with experimental, which confirmed the accuracy of the simplified material model.

  2. Growth and characterisation of bulk Sr2CuO2Cl2 single crystals

    NARCIS (Netherlands)

    Hien, NT; Franse, JJM; Pothuizen, JJM; Li, TW; Menovsky, AA

    1997-01-01

    Large bulk single crystals of the Sr2CuO2Cl2 compound with dimensions of 15 x 6 x 4 mm(3) have been grown directly from the melt by the floating-zone method using a light-image furnace. The optimal growth conditions are found in a mixed atmosphere of 0.2 bar oxygen and 1.2 bar argon. Results of the

  3. A review on solar cells from Si-single crystals to porous materials and quantum dots

    OpenAIRE

    Badawy, Waheed A.

    2013-01-01

    Solar energy conversion to electricity through photovoltaics or to useful fuel through photoelectrochemical cells was still a main task for research groups and developments sectors. In this article we are reviewing the development of the different generations of solar cells. The fabrication of solar cells has passed through a large number of improvement steps considering the technological and economic aspects. The first generation solar cells were based on Si wafers, mainly single crystals. P...

  4. Preparation and Characterization of Single Crystals of MAPO-43 Molecular Sieve

    Institute of Scientific and Technical Information of China (English)

    Jian Jun LI; Guo Dong LI; Chun Yu XI; Jie Sheng CHEN

    2004-01-01

    Large single crystals of MAPO-43 molecular sieve have been synthesized hydrothermally using dimethylamine as the template. The typical molar composition of the starting mixture was 1.0P2O5 : 0.54Al2O3: 0.8MgO: 8.5CH3NHCH3: 0.68HF: 180H2O. The sample was characterized by XRD, TGA, DTA and IR.

  5. Single Crystal Structure Determination of Alumina to 1 Mbar

    Science.gov (United States)

    Dong, H.; Zhang, L.; Prakapenka, V.; Mao, H.

    2014-12-01

    Aluminum oxide (Al2O3) is an important ceramic material and a major oxide in the earth. Additionally, alumina is a widely used pressure standard in static high-pressure experiments (Cr3+-bearing corundum, ruby). The changes of its crystal structure with pressure (P) and temperature (T) are important for its applications and understanding its physical properties in the deep Earth. There have been numerous reports on the high P-T polymorphs of alumina. Previous theoretical calculations and experiments suggest that the crystal structure of Al2O3 evolves greatly at high P-T. In this study, we used the newly developed multigrain crystallography method combined with single-crystal x-ray diffraction analysis technique for the structure determination of alumina at high P-T to provide single-crystal structure refinement for high-pressure phases of Al2O3. Alumina powder was mixed with ~10% Pt and Ne was used as both pressure transmitting media and thermal insulating layers during laser-heating. Coarse-grained aggregates of Al2O3 were synthesized in a laser-heated diamond anvil cell. The structure change of Al2O3 was monitored by in situ x-ray diffraction at ~1 Mbar and 2700 K. The results allow us to distinguish the structural differences between the Rh2O3 (II) structure (space group Pbcn) and perovskite structure (space group Pbnm) for the first high-pressure phase of Al2O3. More detailed results will be discussed in the later work.

  6. Modeling the anisotropic shock response of single-crystal RDX

    Science.gov (United States)

    Luscher, Darby

    Explosives initiate under impacts whose energy, if distributed homogeneously throughout the material, translates to temperature increases that are insufficient to drive the rapid chemistry observed. Heterogeneous thermomechanical interactions at the meso-scale (i.e. between single-crystal and macroscale) leads to the formation of localized hot spots. Direct numerical simulations of mesoscale response can contribute to our understanding of hot spots if they include the relevant deformation mechanisms that are essential to the nonlinear thermomechanical response of explosive molecular crystals. We have developed a single-crystal model for the finite deformation thermomechanical response of cyclotrimethylene trinitramine (RDX). Because of the low symmetry of RDX, a complete description of nonlinear thermoelasticity requires a careful decomposition of free energy into components that represent the pressure-volume-temperature (PVT) response and the coupling between isochoric deformation and both deviatoric and hydrostatic stresses. An equation-of-state (EOS) based on Debye theory that defines the PVT response was constructed using experimental data and density functional theory calculations. This EOS replicates the equilibrium states of phase transformation from alpha to gamma polymorphs observed in static high-pressure experiments. Lattice thermoelastic parameters defining the coupled isochoric free energy were obtained from molecular dynamics calculations and previous experimental data. Anisotropic crystal plasticity is modeled using Orowan's expression relating slip rate to dislocation density and velocity. Details of the theory will be presented followed by discussion of simulations of flyer plate impact experiments, including recent experiments diagnosed with in situ X-ray diffraction at the Advanced Photon Source. Impact conditions explored within the experimental effort have spanned shock pressures ranging from 1-10 GPa for several crystallographic orientations

  7. Fabrication of ZnO Bi-crystals with twist boundaries using Co doped ZnO single crystals

    CERN Document Server

    Ohashi, N; Ohgaki, T; Tsurumi, T; Fukunaga, O; Haneda, H; Tanaka, J

    1999-01-01

    Zn O single crystals doped with Co were grown by using a flux method and their electrical properties were investigated by Hall effect. Then, these crystals were polished with diamond paste and bonded to form bi-crystal by hot pressing under a pressure of 10 MPa at 1000 .deg. C. The bi-crystals showed nonlinear I-V curves, and the curvature of I-V relation agreed with that for Co-doped polycrystalline ZnO.

  8. High-performance tonpilz transducers utilizing d32-cut piezoelectric single crystals

    Science.gov (United States)

    Rehrig, Paul W.; Hackenberger, Wesley S.; Jiang, Xiaoning; Meyer, Richard J.; Geng, Xuecang

    2003-08-01

    High frequency sonar is becoming ever more important to the Navy through expanded use of unmanned underwater vehicles (UUV). Proposed missions for many UUV's involve shallow water operation where broad bandwidth is required making these applications ideal candidates to use single crystal piezoelectrics. In addition, many UUV sonar systems have commercial uses including oceanographic research, oil and mineral prospecting, salvage, and undersea equipment inspection and maintenance. The properties of single crystal piezoelectrics were exploited for broad bandwidth, high frequency sonar. Crystal sonar investigations based on Tonpilz transducers utilizing the '33' resonance mode have shown limitations on bandwidth due to less than ideal resonator aspect ratio. This is a result of the crystals' low elastic stiffness, which leads to short resonators with large lateral dimensions. To address this issue an alternative design was proposed utilizing the '32' resonance mode with the resonating length oriented along a special crystallographic cut. 'Crystals with this orientation are known to have high properties; d32 values as high as 1600 pC/N have been observed. Since prestress for such a design is applied perpendicular to the poling direction, '32' mode Tonpilz elements exhibit lower loss and higher reliability than '33' mode designs. The feasibility of such '32' mode Tonpilz resonators will be presented as determined through property measurements and finite element analysis. The targeted application for this work is broadband (>100%), high frequency (45 kHz) synthetic aperture arrays for unmanned underwater vehicles.

  9. Characteristics of photoconductivity in thallium monosulfide single crystals

    Indian Academy of Sciences (India)

    I M Ashraf; H A Elshaikh; A M Badr

    2007-03-01

    This work elucidates the photoconductivity (PC) of thallium monosulfide single crystals. Results are obtained in the 77-300 K temperature range, 1500-4500 V lx excitation intensity, 6-18 V applied voltage, and in the 640-1500 nm wavelength range. Both the ac-photoconductivity (ac-PC) and the spectral distribution of the photocurrent are studied in different values of light intensity, applied voltage and temperature. Dependencies of carrier lifetime on light intensity, applied voltage and temperature are also investigated as a result of the ac-PC measurements. The temperature dependence of the energy gap width was described by studying the dc-photoconductivity (dc-PC).

  10. Exciton optical transitions in a hexagonal boron nitride single crystal

    Energy Technology Data Exchange (ETDEWEB)

    Museur, L. [Laboratoire de Physique des Lasers - LPL, CNRS UMR 7538, Institut Galilee, Universite Paris 13, 93430 Villetaneuse (France); Brasse, G.; Maine, S.; Ducastelle, F.; Loiseau, A. [ONERA - Laboratoire d' Etude des Microstructures - LEM, ONERA-CNRS, UMR 104, BP 72, 92322 Chatillon Cedex (France); Pierret, A. [ONERA - Laboratoire d' Etude des Microstructures - LEM, ONERA-CNRS, UMR 104, BP 72, 92322 Chatillon Cedex (France); CEA-CNRS, Institut Neel/CNRS, Universite J. Fourier, CEA/INAC/SP2M, 17 rue des Martyrs, 38 054 Grenoble Cedex 9 (France); Attal-Tretout, B. [ONERA - Departement Mesures Physiques - DMPh, 27 Chemin de la Huniere, 91761 Palaiseau Cedex (France); Barjon, J. [GEMaC, Universite de Versailles St Quentin, CNRS Bellevue, 1 Place Aristide Briand, 92195 Meudon Cedex (France); Watanabe, K.; Taniguchi, T. [National Institute for Materials Science, Namiki 1-1, Tsukuba, Ibaraki 305-0044 (Japan); Kanaev, A. [Laboratoire des Sciences des Procedes et des Materiaux - LSPM, CNRS UPR 3407, Universite Paris 13, 93430 Villetaneuse (France)

    2011-06-15

    Near band gap photoluminescence (PL) of a hexagonal boron nitride single crystal has been studied at cryogenic temperatures with synchrotron radiation excitation. The PL signal is dominated by trapped-exciton optical transitions, while the photoluminescence excitation (PLE) spectra show features assigned to free excitons. Complementary photoconductivity and PLE measurements set the band gap transition energy to 6.4 eV and the Frenkel exciton binding energy larger than 380 meV. (copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  11. Oxygen diffusion in [alpha]-Zr single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Hood, G.M. (Reactor Materials Research Branch, Chalk River Laboratories, Atomic Energy of Canada Ltd., Chalk River, Ontario (Canada)); Zou, H. (Reactor Materials Research Branch, Chalk River Laboratories, Atomic Energy of Canada Ltd., Chalk River, Ontario (Canada)); Herbert, S. (Reactor Materials Research Branch, Chalk River Laboratories, Atomic Energy of Canada Ltd., Chalk River, Ontario (Canada)); Schultz, R.J. (Reactor Materials Research Branch, Chalk River Laboratories, Atomic Energy of Canada Ltd., Chalk River, Ontario (Canada)); Nakajima, H. (Department of Materials Science and Technology, Iwate University, Morioka 020 (Japan)); Jackman, J.A. (Metals Science and Technology, CANMET, Booth St., Ottawa, Ontario (Canada))

    1994-06-01

    Oxygen diffusion coefficients, D, have been measured in [alpha]-Zr single crystals in directions both parallel and perpendicular to the c-axis. The measurements, made in the interval 610-870 K, show that diffusion anisotropy is weak and that D is little affected by specimen impurity content. The values determined here are in good agreement with the bulk of previous literature data for the same temperature interval but they are about ten times larger than corresponding values found in a very recent AES study. ((orig.))

  12. Diffusion of Ti in [alpha]-Zr single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Hood, G.M. (Reactor Materials Division Atomic Energy of Canada Ltd., Chalk River Laboratories, Chalk River, Ontario (Canada)); Zou, H. (Reactor Materials Division Atomic Energy of Canada Ltd., Chalk River Laboratories, Chalk River, Ontario (Canada)); Schultz, R.J. (Reactor Materials Division Atomic Energy of Canada Ltd., Chalk River Laboratories, Chalk River, Ontario (Canada)); Bromley, E.H.; Jackman, J.A. (CANMET, Metals Technology Laboratories, Ottawa, Ontario (Canada))

    1994-12-01

    Ti diffusion coefficients (D) have been measured in nominally pure [alpha]-Zr single crystals (773-1124 K) in directions both parallel (D[sub pa]) and perpendicular (D[sub pe], few data) to the c-axis: tracer techniques and secondary ion mass spectrometry were used to determine the diffusion profiles. The results show a temperature dependence which may be interpreted in terms of two regions of diffusion behaviour. Above 1035 K, region I, diffusion conforms to the expectations of intrinsic behaviour with normal Arrhenius law constants: Below 1035 K, region II, D's appear to be enhanced with respect to an extrapolation of region I behaviour. ((orig.))

  13. Depressurization amorphization of single-crystal boron carbide.

    Science.gov (United States)

    Yan, X Q; Tang, Z; Zhang, L; Guo, J J; Jin, C Q; Zhang, Y; Goto, T; McCauley, J W; Chen, M W

    2009-02-20

    We report depressurization amorphization of single-crystal boron carbide (B4C) investigated by in situ high-pressure Raman spectroscopy. It was found that localized amorphization of B4C takes place during unloading from high pressures, and nonhydrostatic stresses play a critical role in the high-pressure phase transition. First-principles molecular dynamics simulations reveal that the depressurization amorphization results from pressure-induced irreversible bending of C-B-C atomic chains cross-linking 12 atom icosahedra at the rhombohedral vertices.

  14. Growth of bulk gadolinium pyrosilicate single crystals for scintillators

    Science.gov (United States)

    Gerasymov, I.; Sidletskiy, O.; Neicheva, S.; Grinyov, B.; Baumer, V.; Galenin, E.; Katrunov, K.; Tkachenko, S.; Voloshina, O.; Zhukov, A.

    2011-03-01

    Ce, Pr, and La-doped gadolinium pyrosilicate Gd2Si2O7 (GPS) single crystals were grown by the Czochralski and Top Seeded Solution Growth (TSSG) techniques for the first time. Formation conditions of different pyrosilicate phases were determined. X-ray luminescence integral intensity of Ce-doped GPS is about one order of magnitude higher in comparison with gadolinium oxyorthosilicate Gd2SiO5:Ce (GSO:Ce). All samples demonstrate temperature stability of luminescence yield up to 400 K.

  15. Nonlinear microwave switching response of BSCCO single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Jacobs, T.; Sridhar, S. [Northeastern Univ., Boston, MA (United States). Dept. of Physics; Willemsen, B.A. [Northeastern Univ., Boston, MA (United States). Dept. of Physics]|[Rome Lab., Hanscom AFB, MA (United States); Li, Qiang [Brookhaven National Lab., Upton, NY (United States); Gu, G.D.; Koshizuka, N. [Superconductivity Research Lab., Tokyo (Japan)

    1996-06-01

    Measurements of the surface impedance in Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8+{delta}} single crystal with microwave currents flowing along the {cflx c} axis show clear evidence of a step-like nonlinearity. The surface resistance switches between apparently quantized levels for microwave field strength changes < 1 mG. This nonlinear response can arise from the presence of intrinsic Josephson junctions along the {cflx c} axis of these samples driven by the microwave current.

  16. Aluminum-rich mesoporous MFI - type zeolite single crystals

    DEFF Research Database (Denmark)

    Kustova, Marina; Kustov, Arkadii; Christensen, Christina Hviid

    2005-01-01

    Zeolitcs are crystalline materials, which are widely used as solid acid catalysts and supports in many industrial processes. Recently, mesoporous MFI-type zeolite single crystals were synthesized by use of carbon particles as a mesopore template and sodium aluminate as the aluminum Source...... are characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), ammonia temperature programmed desorption (NH3-TPD), and N-2 adsorption measurements. The obtained zeolites combine the high crystallinity and the characteristic micropores of zeolites with an intracrystalline mesopore system...

  17. The sublimation kinetics of GeSe single crystals

    Science.gov (United States)

    Irene, E. A.; Wiedemeier, H.

    1975-01-01

    The sublimation kinetics of (001) oriented GeSe single crystal platelets was studied by high-temperature mass spectroscopy, quantitative vacuum microbalance techniques, and hot stage optical microscopy. For a mean experimental temperature of 563 K, the activation enthalpy and entropy are found to equal 32.3 kcal/mole and 19.1 eu, respectively. The vaporization coefficient is less than unity for the range of test temperatures, and decreases with increasing temperature. The combined experimental data are correlated by means of a multistep surface adsorption mechanism.

  18. EPR studies of gamma-irradiated taurine single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Bulut, A. E-mail: abulut@samsun.omu.edu.tr; Karabulut, B.; Tapramaz, R.; Koeksal, F

    2000-04-01

    An EPR study of gamma-irradiated taurine [C{sub 2}H{sub 7}NO{sub 3}S] single crystal was carried out at room temperature. The EPR spectra were recorded in the three at mutually perpendicular planes. There are two magnetically distinct sites in monoclinic lattice. The principle values of g and hyperfine constants for both sites were calculated. The results have indicated the presence of {sup 32}SO{sup -}{sub 2} and {sup 33}SO{sup -}{sub 2} radicals. The hyperfine values of {sup 33}SO{sup -}{sub 2} radical were used to obtain O-S-O bond angle for both sites.

  19. Single crystal piezoelectric composites for advanced NDT ultrasound

    Science.gov (United States)

    Jiang, Xiaoning; Snook, Kevin; Hackenberger, Wesley S.; Geng, Xuecang

    2007-04-01

    In this paper, the design, fabrication and characterization of PMN-PT single crystal/epoxy composites are reported for NDT ultrasound transducers. Specifically, 1-3 PMN-PT/epoxy composites with center frequencies of 5 MHz - 40 MHz were designed and fabricated using either the dice-and-fill method or a photolithography based micromachining process. The measured electromechanical coefficients for composites with frequency of 5 MHz - 15 MHz were about 0.78-0.83, and the coupling coefficients for composites with frequencies of 25 MHz- 40 MHz were about 0.71-0.72. The dielectric loss remains low (advanced NDT ultrasound applications.

  20. 9R structure in drawn industrial single crystal copper wires

    Institute of Scientific and Technical Information of China (English)

    CHEN Jian; YAN Wen; FAN Xin-hui

    2009-01-01

    By using transmission electron microscopy, the microstructures of drawn industrial single crystal copper wires produced by Ohno Continuous Casting(OCC) process were analyzed. The results show that the typical microstructures in the wires mainly include extended planar dislocation boundaries, a small fraction of twins and some dislocation cells sharing boundaries parallel to drawn direction. Besides the typical microstructures, 9R structure configurations were observed in the wires. The formation of 9R polytypes may be caused by the coupled emission of Shockley dislocations from a boundary.

  1. Tensor tomography of stresses in cubic single crystals

    Directory of Open Access Journals (Sweden)

    Dmitry D. Karov

    2015-03-01

    Full Text Available The possibility of optical tomography applying to investigation of a two-dimensional and a three-dimensional stressed state in single cubic crystals has been studied. Stresses are determined within the framework of the Maxwell piezo-optic law (linear dependence of the permittivity tensor on stresses and weak optical anisotropy. It is shown that a complete reconstruction of stresses in a sample is impossible both by translucence it in the parallel planes system and by using of the elasticity theory equations. For overcoming these difficulties, it is offered to use a method of magnetophotoelasticity.

  2. Capillarity creates single-crystal calcite nanowires from amorphous calcium carbonate.

    Science.gov (United States)

    Kim, Yi-Yeoun; Hetherington, Nicola B J; Noel, Elizabeth H; Kröger, Roland; Charnock, John M; Christenson, Hugo K; Meldrum, Fiona C

    2011-12-23

    Single-crystal calcite nanowires are formed by crystallization of morphologically equivalent amorphous calcium carbonate (ACC) particles within the pores of track etch membranes. The polyaspartic acid stabilized ACC is drawn into the membrane pores by capillary action, and the single-crystal nature of the nanowires is attributed to the limited contact of the intramembrane ACC particle with the bulk solution. The reaction environment then supports transformation to a single-crystal product.

  3. Compression of Single-Crystal Orthopyroxene to 60GPa

    Science.gov (United States)

    Finkelstein, G. J.; Dera, P. K.; Holl, C. M.; Dorfman, S. M.; Duffy, T. S.

    2010-12-01

    Orthopyroxene ((Mg,Fe)SiO3) is one of the dominant phases in Earth’s upper mantle - it makes up ~20% of the upper mantle by volume. At high pressures and temperatures, this phase undergoes several well-characterized phase transitions. However, when compressed at low temperature and high-pressure, orthopyroxene is predicted to exhibit metastable behavior(1). Previous researchers have found orthoenstatite (Mg endmember of orthopyroxene) persists up to ~10 GPa, and diffraction(2-3), Raman(4), and elasticity(5) experiments suggest a phase transition above this pressure to an as-yet unidentified structure. While earlier diffraction data has surprisingly only been evaluated for structural information to ~9 GPa(2), changes in high-pressure Raman spectra to ~70 GPa indicate that several more high-pressure phase transitions in orthopyroxene are likely, including at least one change in Si-coordination(6). We have recently conducted exploratory experiments to further elucidate the high-pressure behavior of orthopyroxene. Compressing a single crystal of Fe-rich orthopyroxene (Fe0.66Mg0.24Ca0.05SiO3) using a diamond anvil cell, we observe phase transitions at ~10, 14, and 30 GPa, with the new phases having monoclinic, orthorhombic, and orthorhombic symmetries, respectively. While the first two transitions do not show a significant change in volume, the phase transition at ~30 GPa shows a large decrease in volume, which is consistent with a change in Si coordination number to mixed 4- and 6-fold coordination. References: [1] S. Jahn, American Mineralogist 93, 528-532 (2008). [2] R. J. Angel, J. M. Jackson, American Mineralogist 87, 558-561 (2002). [3] R. J. Angel, D. A. Hugh-Jones, Journal of Geophysical Research-Solid Earth 99, 19,777-19,783 (1994). [4] G. Serghiou, Journal of Raman Spectroscopy 34, 587-590 (2003). [5] J. Kung et al., Physics of the Earth and Planetary Interiors 147, 27-44 (2004). [6] G. Serghiou, A. Chopelas, R. Boehler, Journal of Physics: Condensed Matter

  4. Study on Inclusions in Large Sapphire Optical Crystal Grown by SAPMAC Method

    Institute of Scientific and Technical Information of China (English)

    WANG Gui-gen; ZHANG Ming-fu; ZUO Hong-bo; HE Xiao-dong; HAN Jie-cai

    2006-01-01

    The sapphire (Al2O3) single crystal is a kind of excellent infrared transmission window materials. A large-sized sapphire (Φ225 mm×205 mm, 27.5 kg) was grown by SAPMAC method (sapphire growth technique with micro-pulling and shoulder-expanding at cooled center). Several kinds of inclusion in the large sapphire crystal were investigated by means of an optical microscopy (OM), scanning electron microscopy (SEM) and electron probe microanalysis (EPMA). The experimental results show that most inclusions are consisted of solid metallic and non-metallic particles as well as gas pores caused by the impurity of alumina as the raw material, the thermal dissociation of aluminum oxide melt and the reaction of the melt to the crucible material (Mo) at high temperatures. It is also found that in different crystal regions the inclusions are of varied sizes, morphology and chemical compositions. Finally, the measures to reduce and eliminate the inclusions are proposed to improve the crystal quality.

  5. Congruent melting of gallium nitride at 6 GPa and its application to single-crystal growth.

    Science.gov (United States)

    Utsumi, Wataru; Saitoh, Hiroyuki; Kaneko, Hiroshi; Watanuki, Tetsu; Aoki, Katsutoshi; Shimomura, Osamu

    2003-11-01

    The synthesis of large single crystals of GaN (gallium nitride) is a matter of great importance in optoelectronic devices for blue-light-emitting diodes and lasers. Although high-quality bulk single crystals of GaN suitable for substrates are desired, the standard method of cooling its stoichiometric melt has been unsuccessful for GaN because it decomposes into Ga and N(2) at high temperatures before its melting point. Here we report that applying high pressure completely prevents the decomposition and allows the stoichiometric melting of GaN. At pressures above 6.0 GPa, congruent melting of GaN occurred at about 2,220 degrees C, and decreasing the temperature allowed the GaN melt to crystallize to the original structure, which was confirmed by in situ X-ray diffraction. Single crystals of GaN were formed by cooling the melt slowly under high pressures and were recovered at ambient conditions.

  6. ‘Ionic crystals’ consisting of trinuclear macrocations and polyoxometalate anions exhibiting single crystal to single crystal transformation: breathing of crystals

    Indian Academy of Sciences (India)

    T ARUMUGANATHAN; ASHA SIDDIKHA; SAMAR K DAS

    2017-08-01

    Ion pairing of trinuclear macrocation cluster (known as basic carboxylate), [M ₃ (μ ₃-O) (ClCH ₂COO) ₆ (H ₂O) ₃] ¹⁺ and a Keggin type polyoxometalate cluster anion [SiW ₁₂O₄₀] ⁴⁻ is stabilized with a number of crystal water molecules in composite type compounds [M ₃ (μ ₃-O)(ClCH ₂COO) ₆ (H ₂O) ₃] ₄[SiW ₁₂O₄₀] ·xH ₂O · 2ClCH ₂COOH [M = Fe ³⁺, x = 18(1); M = Cr ³⁺x = 14(2)]. When the crystals of 1 are heated at 85◦C and 135◦C for 3.5 hours in an open atmospheric condition, it goes to [Fe ₃ (μ ₃-O)(ClCH ₂COO) ₆ (H ₂O) ₃] ₄ [SiW ₁₂O₄₀] ·10H ₂O ·2ClCH ₂COOH (dehydrated 1-85o ≡ 1'), and [Fe ₃ (μ ₃-O) (ClCH ₂COO) ₆ (H ₂O) ₃] ₄ [SiW ₁₂O₄₀] · 8H ₂O · 2ClCH ₂COOH (dehydrated 1-135o ≡ 1'') respectively with the loss of considerable amount of lattice water molecules retaining their single crystallinity. On the other hand, the single crystals of compound 2, upon heating at 85◦C or 135◦C for 3.5 hours, undergo ‘crystal-to-crystal transformation’ to the single crystals of [Cr ₃ (μ ₃-O)(ClCH ₂COO) ₆ (H ₂O) ₃] ₄ [SiW₁₂O₄₀]·8H₂O·2ClCH ₂COOH (dehydrated 2 ≡ 2'). Crystal structure analyses show that the parent compounds 1 and 2 undergo molecular rearrangement (molecular motion in the solid state) in respective dehydrated compounds. Remarkably, these dehydrated crystals (1', 1'' and 2'), upon exposure to water vapor at an ambient condition, regenerate the crystals of parent compounds 1 and 2, respectively

  7. Single nanoparticle detection using photonic crystal enhanced microscopy.

    Science.gov (United States)

    Zhuo, Yue; Hu, Huan; Chen, Weili; Lu, Meng; Tian, Limei; Yu, Hojeong; Long, Kenneth D; Chow, Edmond; King, William P; Singamaneni, Srikanth; Cunningham, Brian T

    2014-03-07

    We demonstrate a label-free biosensor imaging approach that utilizes a photonic crystal (PC) surface to detect surface attachment of individual dielectric and metal nanoparticles through measurement of localized shifts in the resonant wavelength and resonant reflection magnitude from the PC. Using a microscopy-based approach to scan the PC resonant reflection properties with 0.6 μm spatial resolution, we show that metal nanoparticles attached to the biosensor surface with strong absorption at the resonant wavelength induce a highly localized reduction in reflection efficiency and are able to be detected by modulation of the resonant wavelength. Experimental demonstrations of single-nanoparticle imaging are supported by finite-difference time-domain computer simulations. The ability to image surface-adsorption of individual nanoparticles offers a route to single molecule biosensing, in which the particles can be functionalized with specific recognition molecules and utilized as tags.

  8. Large Area Printing of 3D Photonic Crystals

    Science.gov (United States)

    Watkins, James J.; Beaulieu, Michael R.; Hendricks, Nicholas R.; Kothari, Rohit

    2014-03-01

    We have developed a readily scalable print, lift, and stack approach for producing large area, 3D photonic crystal (PC) structures. UV-assisted nanoimprint lithography (UV-NIL) was used to pattern grating structures comprised of highly filled nanoparticle polymer composite resists with tune-able refractive indices (RI). The gratings were robust and upon release from a support substrate were oriented and stacked to yield 3D PCs. The RI of the composite resists was tuned between 1.58 and 1.92 at 800 nm while maintaining excellent optical transparency. The grating structure dimensions, line width, depth, and pitch, were easily varied by simply changing the imprint mold. For example, a 6 layer log-pile stack was prepared using a composite resist a RI of 1.72 yielding 72 % reflection at 900 nm. The process is scalable for roll-to-roll (R2R) production. Center for Hierarchical Manufacturing - an NSF Nanoscale Science and Engineering Center.

  9. Q-switching with single crystal photo-elastic modulators

    Science.gov (United States)

    Bammer, F.; Petkovsek, R.

    2011-02-01

    An overview is given about experiments with a new method for Q-switching lasers at a constant pulse repetition frequency. It uses inside the laser resonator a Single Crystal Photo-Elastic Modulator (SCPEM). This consists of one piezo-electric crystal electrically excited on a mechanical resonance frequency. In resonance mechanical stresses are induced that lead via the photo-elastic effect to a strongly modulated birefringence. Polarized light going through such an oscillating crystal will experience a significant modulation of its polarization and of transmission through a polarizer. Suitable materials should not be optically active, as it is for example the case for SiO2, and should allow the excitation of a longitudinal oscillation with an electric field perpendicular to the travelling direction of the light. Crystals of the group 3m, like LiTaO3 and LiNbO3, proved to be ideally suited for SCPEMS for the NIR- and VIS-region. For the infrared GaAs can be used. We demonstrated SCPEM-Q-switching for a Nd:YAG-fiber, a Nd:YVO4-slab- and a Nd:YAG-rod-laser with typical pulse repetition rates of 100-200kHz, pulse enhancement factors of 100 and pulse durations {1/100 of the period time. Typically the average power during pulsed operation is nearly the same as the cw-power, when the modulator is switched off. The most stable results were achieved up to now with the Nd:YVO4-slab-laser at 10W average power, 1.1 kW peak power, 127 kHz pulse repetition rate, and 70ns pulse durations.

  10. Highly polarized single-c-domain single-crystal Pb(Mn,Nb)O(3)-PZT thin films.

    Science.gov (United States)

    Wasa, Kiyotaka; Adachi, Hideaki; Nishida, Ken; Yamamoto, Takashi; Matsushima, Tomoaki; Kanno, Isaku; Kotera, Hidetoshi

    2012-01-01

    In-plane unstrained single-c-domain/single-crystal thin films of PZT-based ternary ferroelectric perovskite, ξPb(Mn,Nb)O3-(1 - ξ)PZT, were grown on SrRuO(3)/Pt/MgO substrates using magnetron sputtering followed by quenching. The sputtered unstrained thin films exhibit unique ferroelectric properties: high coercive field, Ec > 180 kV/cm, large remanent polarization, P(r) = 100 μC/cm(2), small relative dielectric constants, ε* = 100 to 150, high Curie temperature, Tc = ~600 °C, and bulk-like large transverse piezoelectric constants, e31,f = -12.0 C/m(2) for PZT(48/52) at ξ = 0.06. The unstrained thin films are an ideal structure to extract the bulk ferroelectric properties. Their micro-structures and ferroelectric properties are discussed in relation to the potential applications for piezoelectric MEMS. © 2012 IEEE

  11. The crystal structure and twinning of neodymium gallium perovskite single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Ubizskii, S.B.; Vasylechko, L.O.; Savytskii, D.I.; Matkovskii, A.O.; Syvorotka, I.M. [Res. Production Amalgamation Carat, L' viv (Ukraine)

    1994-10-01

    By means of X-ray structure analysis, the crystal structure of neodymium gallium perovskite (NGP) single crystals (NdGaO{sub 3}) being used as a substrate for HTSC film epitaxy has been refined and the position of atoms has been determined. The possibility of YBa{sub 2}Cu{sub 3}O{sub 7-x} film epitaxy on the plane (110) of NGP crystal as well as its advantages and pitfalls are analysed from structural data. The twinning types in the NGP crystal were established. The twinning structure of NGP substrates is found to be stable up to a temperature of 1173 K, as differentiated from the LaGaO{sub 3} and LaAlO{sub 3} substrates. It is intimated that the twinning in the NGP substrates oriented as (001) can result in creation of 90 degrees twin bonds in a film, and in the case of (110)-oriented plates it is possible to ignore the twinning presence in substrate completely. (author)

  12. Single-crystal neutron diffraction studies on Ni-based metal-pnictide superconductor BaNi2As2

    Energy Technology Data Exchange (ETDEWEB)

    Kothapalli, Karunakar [Los Alamos National Laboratory; Ronning, F [Los Alamos National Laboratory; Bauer, E D [Los Alamos National Laboratory; Schultz, A J [Los Alamos National Laboratory; Nakotte, Heinz [Los Alamos National Laboratory

    2009-01-01

    We report the results of single-crystal neutron diffraction studies of the superconductor BaNi{sub 2}As{sub 2}. The experiments were performed on a tiny crystal of mass 0.8 mg at several temperatures between 20 and 200 K using the Single Crystal Diffractometer, SCD, at the Los Alamos Neutron Science Center. Above 130 K, BaNi{sub 2}As{sub 2} crystallizes in the tetragonal ThCr{sub 2}Si{sub 2} structure. Our neutron diffraction data corroborate a first-order structural transition around 130 K with a relatively large hysteresis of about 10K, in agreement with observations from bulk studies. The anisotropic thermal displacement coefficients are enhanced along c-axis approaching the transition, and a splitting is observed for in-plane type reflections below the transition, which is evidence for a change in crystal structure.

  13. Hydrothermal growth and characterization of UO2 single crystals for neutron radiation detection(Conference Presentation)

    Science.gov (United States)

    Mann, Matthew; Hunt, Eric; Young, Christopher; Kimani, Martin; Turner, David; Varga, Stephan; Petrosky, James

    2016-09-01

    There is significant interest in developing efficient, direct conversion, neutron sensitive solid-state radiation detector materials with the ability to discriminate between photon and neutron events. Recently, this has led several research groups to pursue uranium dioxide (UO2) single crystals as a detection material due to the large reaction energy ( 185 MeV) from a neutron induced fission event. The resulting electrical pulse, generated primarily by the energetic fission fragments, is expected to be on the order of 165 MeV, which is much greater than current detection schemes which rely on reaction energies between 2-6 MeV. The primary technical challenge to the successful fabrication of UO2 devices is the lack of high quality (semiconductor grade) single crystals of UO2. The high melting point of UO2 ( 2878°C) precludes the use of traditional melt growth techniques like Czochralski. While exotic melt growth techniques such as arc fusion, cold crucible, and solar furnace have successfully grown UO2, the crystal quality suffers from both thermal strain and oxygen non-stoichiometry, two particularly difficult challenges inherent to uranium oxide materials. Crystal growth of UO2 by the hydrothermal synthesis technique has never been investigated, although the method has been successfully applied to the synthesis of other refractory oxides. In this talk, we will present growth of UO2 single crystals from a variety of hydrothermal solutions at temperatures below 650C. X-ray diffraction confirmed the stoichiometric nature of the samples and X-ray photoelectron spectroscopy determined the photoelectric work function of two crystal orientations. Preliminary proof-of-concept irradiation studies of a simple UO2 resistive detector will also be presented.

  14. Aging and memory effect in magnetoelectric gallium ferrite single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Singh, Vijay; Mukherjee, Somdutta [Department of Physics, Indian Institute of Technology Kanpur, Kanpur 208016 (India); Mitra, Chiranjib [Department of Physics, Indian Institute of Science Education and Research, Kolkata 741252 (India); Garg, Ashish [Department of Materials Science and Engineering, Indian Institute of Technology Kanpur, Kanpur 208016 (India); Gupta, Rajeev, E-mail: guptaraj@iitk.ac.in [Department of Physics, Indian Institute of Technology Kanpur, Kanpur 208016 (India); Materials Science Programme, Indian Institute of Technology Kanpur, Kanpur 208016 (India)

    2015-02-01

    Here, we present a time and temperature dependent magnetization study to understand the spin dynamics in flux grown single crystals of gallium ferrite (GaFeO{sub 3}), a known magnetoelectric, ferroelectric and ferrimagnet. Results of the magnetic measurements conducted in the field-cooled (FC) and zero-field-cooled (ZFC) protocols in the heating and cooling cycles were reminiscent of a “memory” effect. Subsequent time dependent magnetic relaxation measurements carried out in ZFC mode at 30 K with an intermittent cooling to 20 K in the presence of a small field show that the magnetization in the final wait period tends to follow its initial state which was present before the cooling break taken at 20 K. These observations provide an unambiguous evidence of single crystal gallium ferrite having a spin glass like phase. - Highlights: • Gallium ferrite a room temperature magnetoelectric and ferrimagnetic material. • Spin‐glass like phase at low temperatures below ∼200 K. • Observation of memory and aging effects in GFO.

  15. Ultrafast dynamic response of single crystal β-HMX

    Science.gov (United States)

    Zaug, Joseph M.; Armstrong, Michael R.; Crowhurst, Jonathan C.; Radousky, Harry B.; Ferranti, Louis; Swan, Raymond; Gross, Rick; Teslich, Nick E.; Wall, Mark A.; Austin, Ryan A.; Fried, Laurence E.

    2017-01-01

    We report results from ultrafast compression experiments conducted on β-HMX single crystals. Results consist of nominally 12 picosecond time-resolved wave profile data, (ultrafast time domain interferometry -TDI measurements), that were analyzed to determine high-velocity wave speeds as a function of piston velocity. TDI results are used to validate calculations of anisotropic stress-strain behavior of shocked loaded energetic materials. Our previous results derived using a 350 ps duration compression drive revealed anisotropic elastic wave response in single crystal β-HMX from (110) and (010) impact planes. Here we present results using a 1.05 ns duration compression drive with a 950 ps interferometry window to extend knowledge of the anisotropic dynamic response of β-HMX within eight microns of the initial impact plane. We observe two distinct wave profiles from (010) and three wave profiles from (010) impact planes. The (110) impact plane wave speeds typically exceed (010) impact plane wave speeds at the same piston velocities. The development of multiple hydrodynamic wave profiles begins at 20 GPa for the (110) impact plane and 28 GPa for the (10) impact plane. We compare our ultrafast TDI results with previous gun and plate impact results on β-HMX and PBX9501.

  16. Stress topology within silicon single-crystal cantilever beam

    Directory of Open Access Journals (Sweden)

    Alexander P. Kuzmenko

    2015-06-01

    Full Text Available Flexural elastic deformations of single-crystal silicon have been studied using microspectral Raman scattering. Results are reported on nano-scaled sign-changing shifts of the main peak of the microspectral Raman scattering within the single-crystal silicon cantilever beam during exposure to flexural stress. The maximum value of Raman shift characteristic of the 518 cm−1 silicon peak at which elasticity still remains has been found to be 8 cm−1 which corresponds to an applied deformation of 4 GPa. We report three-dimensional maps of the distribution of internal stresses at different levels of deformation up to irreversible changes and brittle fracture of the samples that clearly show compression and tension areas and an undeformed area. A qualitative explanation of the increase in the strength of the cantilever beam due to its small thickness (2 μm has been provided that agrees with the predictions of real-world physical parameters obtained in SolidWorks software environment with the SimulationXpress module. We have defined the relative strain of the beam surface which was 2% and received a confirmation of changes in the silicon lattice parameter from 0.54307 nm to 0.53195 nm by the BFGS algorithm.

  17. Single Crystal Diamond Needle as Point Electron Source

    Science.gov (United States)

    Kleshch, Victor I.; Purcell, Stephen T.; Obraztsov, Alexander N.

    2016-10-01

    Diamond has been considered to be one of the most attractive materials for cold-cathode applications during past two decades. However, its real application is hampered by the necessity to provide appropriate amount and transport of electrons to emitter surface which is usually achieved by using nanometer size or highly defective crystallites having much lower physical characteristics than the ideal diamond. Here, for the first time the use of single crystal diamond emitter with high aspect ratio as a point electron source is reported. Single crystal diamond needles were obtained by selective oxidation of polycrystalline diamond films produced by plasma enhanced chemical vapor deposition. Field emission currents and total electron energy distributions were measured for individual diamond needles as functions of extraction voltage and temperature. The needles demonstrate current saturation phenomenon and sensitivity of emission to temperature. The analysis of the voltage drops measured via electron energy analyzer shows that the conduction is provided by the surface of the diamond needles and is governed by Poole-Frenkel transport mechanism with characteristic trap energy of 0.2-0.3 eV. The temperature-sensitive FE characteristics of the diamond needles are of great interest for production of the point electron beam sources and sensors for vacuum electronics.

  18. CH3NH3PbCl3 Single Crystals: Inverse Temperature Crystallization and Visible-Blind UV-Photodetector

    KAUST Repository

    Maculan, Giacomo

    2015-09-02

    Single crystals of hybrid perovskites have shown remarkably improved physical properties compared to their polycrystalline film counterparts, underscoring their importance in the further development of advanced semiconductor devices. Here we present a new method of sizeable CH3NH3PbCl3 single crystal growth based on retrograde solubility behavior of hybrid perovskites. We show, for the first time, the energy band structure, charge-carrier recombination and transport properties of single crystal CH3NH3PbCl3. The chloride-based perovskite crystals exhibit trap-state density, charge carriers concentration, mobility and diffusion length comparable with the best quality crystals of methylammonium lead iodide or bromide perovskites reported so far. The high quality of the crystal along with its suitable optical bandgap enabled us to design and build an efficient visible-blind UV-photodetector, demonstrating the potential of this material to be employed in optoelectronic applications.

  19. Size effects on void growth in single crystals with distributed voids

    DEFF Research Database (Denmark)

    Borg, Ulrik; Niordson, Christian Frithiof; Kysar, J.W.

    2008-01-01

    The effect of void size on void growth in single crystals with uniformly distributed cylindrical voids is studied numerically using a finite deformation strain gradient crystal plasticity theory with an intrinsic length parameter. A plane strain cell model is analyzed for a single crystal...

  20. Ultrafast growth of single-crystal graphene assisted by a continuous oxygen supply

    Science.gov (United States)

    Xu, Xiaozhi; Zhang, Zhihong; Qiu, Lu; Zhuang, Jianing; Zhang, Liang; Wang, Huan; Liao, Chongnan; Song, Huading; Qiao, Ruixi; Gao, Peng; Hu, Zonghai; Liao, Lei; Liao, Zhimin; Yu, Dapeng; Wang, Enge; Ding, Feng; Peng, Hailin; Liu, Kaihui

    2016-11-01

    Graphene has a range of unique physical properties and could be of use in the development of a variety of electronic, photonic and photovoltaic devices. For most applications, large-area high-quality graphene films are required and chemical vapour deposition (CVD) synthesis of graphene on copper surfaces has been of particular interest due to its simplicity and cost effectiveness. However, the rates of growth for graphene by CVD on copper are less than 0.4 μm s-1, and therefore the synthesis of large, single-crystal graphene domains takes at least a few hours. Here, we show that single-crystal graphene can be grown on copper foils with a growth rate of 60 μm s-1. Our high growth rate is achieved by placing the copper foil above an oxide substrate with a gap of ∼15 μm between them. The oxide substrate provides a continuous supply of oxygen to the surface of the copper catalyst during the CVD growth, which significantly lowers the energy barrier to the decomposition of the carbon feedstock and increases the growth rate. With this approach, we are able to grow single-crystal graphene domains with a lateral size of 0.3 mm in just 5 s.

  1. Mapping single-crystal dendritic microstructure and defects in nickel-base superalloys with synchrotron radiation

    Energy Technology Data Exchange (ETDEWEB)

    Husseini, Naji S. [Applied Physics Program, University of Michigan, Ann Arbor, MI 48109 (United States)], E-mail: najihuss@umich.edu; Kumah, Divine P. [Applied Physics Program, University of Michigan, Ann Arbor, MI 48109 (United States); Yi, Jian Z.; Torbet, Christopher J. [Department of Materials Science and Engineering, University of Michigan, Ann Arbor, MI 48109 (United States); Arms, Dohn A.; Dufresne, Eric M. [Advanced Photon Source, Argonne National Laboratory, Argonne, IL 60439 (United States); Pollock, Tresa M.; Wayne Jones, J. [Department of Materials Science and Engineering, University of Michigan, Ann Arbor, MI 48109 (United States); Clarke, Roy [Applied Physics Program, University of Michigan, Ann Arbor, MI 48109 (United States)

    2008-10-15

    Solidification of single-crystal nickel-base superalloys introduces large-scale segregation of constituent elements and defects such as dislocations and mosaicity. By exploiting the energy tunability and interference capabilities of high-brilliance X-ray radiation, key structural features of the dendritic single crystals were mapped over large areas. Interference and diffraction of synchrotron X-rays revealed significant misorientations between individual dendrites in the as-solidified state. For the first time this mosaic structure was quantified for an array of dendrites and correlated with the density of 'grown-in' dislocations whose density ranged from 10{sup 7} to 10{sup 8} cm{sup -2}. Absorption contrast permitted simultaneous mapping of the distribution of refractory metal additives (e.g. rhenium and tungsten), which segregated preferentially to the dendrite cores with a linear composition gradient toward the interdendritic regions. The results demonstrate that synchrotron X-ray imaging is promising for in situ studies of single-crystal structure and defects in nickel-base superalloys.

  2. Non-equilibrium molecular dynamics simulations of spall in single crystal tantalum

    Science.gov (United States)

    Hahn, Eric N.; Germann, Timothy C.; Ravelo, Ramon J.; Hammerberg, James E.; Meyers, Marc A.

    2017-01-01

    Ductile tensile failure of tantalum is examined through large scale non-equilibrium molecular dynamics simulations. Several loading schemes including flyer plate impact, decaying shock loading via a frozen piston, and quasi-isentropic (constant strain-rate) expansion are employed to span tensile strain-rates of 108 to 1014 per second. Single crystals of orientation are specifically evaluated to eliminate grain boundary effects. Heterogeneous void nucleation occurs principally at the intersection of deformation twins in single crystals. At high strain rates, multiple spall events occur throughout the material and voids continue to nucleate until relaxation waves arrive from adjacent events. At ultra-high strain rates, those approaching or exceeding the atomic vibrational frequency, spall strength saturates near the maximum theoretical spall strength.

  3. Effect of physicochemical factors on the microplasticity of the surface layer of molybdenum single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Savenko, V.I.; Kuchumova, V.M.; Kochanova, L.A.; Shchukin, E.D.

    1984-07-01

    The microplastic properties of the surface layer of molybdenum single crystals produced by electron-beam zone melting have been investigated experimentaly using ultramicrosclerometry and microindentation techniques. It is found that the 111 plane has the highest susceptibility to plastic damage, while the 100 plane is the hardest. An analysis of the stressed state of the material under an indenter shows that the dislocation density along the loading paths, which characterizes the microplasticity of the material, is largely determined by the crystallography of the lattice, i.e., by the arrangement and the number of effective slip systems in specimens of different orientations. The effect of a monolayer octadecylamine film on the microplastic behavior of molybdenum single crystals is discussed.

  4. High quality single crystal Ge nano-membranes for opto-electronic integrated circuitry

    Energy Technology Data Exchange (ETDEWEB)

    Shah, V. A., E-mail: vishal.shah@warwick.ac.uk; Gammon, P. M. [Department of Engineering, The University of Warwick, Coventry CV4 7AL (United Kingdom); Department of Physics, The University of Warwick, Coventry CV4 7AL (United Kingdom); Rhead, S. D.; Halpin, J. E.; Trushkevych, O.; Wilson, N. R.; Myronov, M.; Edwards, R. S.; Patchett, D. H.; Allred, P. S.; Prest, M. J.; Whall, T. E.; Parker, E. H. C.; Leadley, D. R. [Department of Physics, The University of Warwick, Coventry CV4 7AL (United Kingdom); Chávez-Ángel, E. [ICN2-Institut Catala de Nanociencia i Nanotecnologia, Campus UAB, 08193 Bellaterra (Barcelona) (Spain); Department of Physics, UAB, 08193 Bellaterra (Barcelona) (Spain); Shchepetov, A.; Prunnila, M. [VTT Technical Research Centre of Finland, P.O. Box 1000, FI-02044 VTT, Espoo (Finland); Kachkanov, V.; Dolbnya, I. P. [Diamond Light Source, Harwell Science and Innovation Campus, Didcot, Oxfordshire OX11 0DE (United Kingdom); Reparaz, J. S. [ICN2-Institut Catala de Nanociencia i Nanotecnologia, Campus UAB, 08193 Bellaterra (Barcelona) (Spain); and others

    2014-04-14

    A thin, flat, and single crystal germanium membrane would be an ideal platform on which to mount sensors or integrate photonic and electronic devices, using standard silicon processing technology. We present a fabrication technique compatible with integrated-circuit wafer scale processing to produce membranes of thickness between 60 nm and 800 nm, with large areas of up to 3.5 mm{sup 2}. We show how the optical properties change with thickness, including appearance of Fabry-Pérot type interference in thin membranes. The membranes have low Q-factors, which allow the platforms to counteract distortion during agitation and movement. Finally, we report on the physical characteristics showing sub-nm roughness and a homogenous strain profile throughout the freestanding layer, making the single crystal Ge membrane an excellent platform for further epitaxial growth or deposition of materials.

  5. Oxygen and hydrogen evolution reaction on oriented single crystals of ruthenium dioxide

    Energy Technology Data Exchange (ETDEWEB)

    Berger, L I; Pollak, F H; Canivez, Y; O& #x27; Grady, W

    1979-01-01

    A novel design for water electrolysis using a solid polymer electrolyte is being developed by General Electric. Ruthenium is one of the best electrocatalysts for the oxygen evolution reaction. There are problems connected with the significant loss in electrocatalytic activity with time. This performance degradation is presumably due to the gradual formation of an RuO/sub 2/ film. We have performed electrochemical measurements on (100), (110) and (111) oriented single crystals of RuO/sub 2/ in order to elucidate the mechanism of the electrocatalytic process. Large single crystals were grown by the vapor transport method. Our investigation has revealed several interesting differences for the various orientations. This study indicates that RuO/sub 3/ may be an important intermediate species prior to oxygen evolution and that the formation of the RuO/sub 3/ is the rate limiting process. Similar results were previously obtained for IrO/sub 2/.

  6. The development of directional coarsening of the gamma-prime precipitate in superalloy single crystals

    Science.gov (United States)

    Mackay, R. A.; Ebert, L. J.

    1983-01-01

    A study has been made of the kinetics of the directional coarsening of the gamma-prime precipitates in Ni-5.8Al-14.6Mo-6.2Ta single crystals during creep at 982 C. In this alloy, which is characterized by a large negative lattice misfit between the gamma-prime precipitate and the gamma matrix, the formation of gamma-prime rafts begins during primary creep, and the rafts grow in length as the deformation proceeds into steady-state creep. After that, the length of the rafts stabilizes. The thickness of the rafts remains constant from primary up to tertiary creep. The directional coarsening behavior of the alloy studied is similar to that of a more conventional single-crystal superalloy having a substantially smaller negative misfit.

  7. Solution-printed organic semiconductor blends exhibiting transport properties on par with single crystals.

    Science.gov (United States)

    Niazi, Muhammad R; Li, Ruipeng; Qiang Li, Er; Kirmani, Ahmad R; Abdelsamie, Maged; Wang, Qingxiao; Pan, Wenyang; Payne, Marcia M; Anthony, John E; Smilgies, Detlef-M; Thoroddsen, Sigurdur T; Giannelis, Emmanuel P; Amassian, Aram

    2015-11-23

    Solution-printed organic semiconductors have emerged in recent years as promising contenders for roll-to-roll manufacturing of electronic and optoelectronic circuits. The stringent performance requirements for organic thin-film transistors (OTFTs) in terms of carrier mobility, switching speed, turn-on voltage and uniformity over large areas require performance currently achieved by organic single-crystal devices, but these suffer from scale-up challenges. Here we present a new method based on blade coating of a blend of conjugated small molecules and amorphous insulating polymers to produce OTFTs with consistently excellent performance characteristics (carrier mobility as high as 6.7 cm(2) V(-1) s(-1), low threshold voltages ofcrystallization can yield solution-printed polycrystalline organic semiconductor films with transport properties and other figures of merit on par with their single-crystal counterparts.

  8. Microstructure Evolution in High Purity Aluminum Single Crystal Processed by Equal Channel Angular Pressing (ECAP).

    Science.gov (United States)

    Dong, Jinfang; Dong, Qing; Dai, Yongbing; Xing, Hui; Han, Yanfeng; Ma, Jianbo; Zhang, Jiao; Wang, Jun; Sun, Baode

    2017-01-22

    Aluminum single crystal with 99.999% purity was deformed at room temperature by equal channel angular pressing (ECAP) up to 16 passes. Grain size and misorientation of processed samples were quantitatively characterized by TEM and EBSD. The results show that the refinement efficiency of high purity aluminum single crystal was poor in the initial stage. Extrusion by fewer ECAP passes (n ≤ 8) resulted in only elongated grains containing a large number of subgrains and small misorientations between grains. Stable microstructures of nearly equiaxed grains with high misorientations were obtained by 15 passages, indicating that the initial extremely coarse grains and highly uniform grain orientation are not conducive to the accumulation of strain energy. The initial state of high purity aluminum has a significant effect on the refining efficiency of the ECAP process.

  9. Neutron diffraction studies of magnetic-shape memory Ni-Mn-Ga single crystal

    Energy Technology Data Exchange (ETDEWEB)

    Heczko, Oleg [Laboratory of Materials Science, Helsinki University of Technology, Vuorimiehentie 2A, P.O. Box 6200, FI-02015 TKK, Espoo (Finland)]. E-mail: oleg.heczko@tkk.fi; Prokes, Karel [Berlin Neutron Scattering Center, Hahn-Meitner-Institut Berlin, Glienicker Strasse 100, D-14109 Berlin (Wannsee) (Germany); Hannula, Simo-Pekka [Laboratory of Materials Science, Helsinki University of Technology, Vuorimiehentie 2A, P.O. Box 6200, FI-02015 TKK, Espoo (Finland)

    2007-09-15

    Neutron diffraction of single crystal of the typical example of magnetic-shape memory (MSM) alloy Ni{sub 49.7}Mn{sub 29.3}Ga{sub 21} was carried out with a 2D position sensitive detector. The quality and inhomogeneity of the single crystal and martensite variant distribution was studied using {omega}-scan of selected nuclear Bragg reflections. The neutron diffraction reveals split of the (2 0 0) reflection of major martensite variant and large structural inhomogeneities in martensite phase. Using measurement in reciprocal space, we recorded a set of reflections that appear due to structural modulation (5 M) of the martensite, however, the set seems to be incomplete with missing or very weak reflections of second order compared with X-ray diffraction. The line of the magnetic reflection arising from the supposed antiferromagnetic ordering of the excess Mn atoms was very weak and it is difficult to discern from the background.

  10. Neutron diffraction studies of magnetic-shape memory Ni-Mn-Ga single crystal

    Science.gov (United States)

    Heczko, Oleg; Prokes, Karel; Hannula, Simo-Pekka

    2007-09-01

    Neutron diffraction of single crystal of the typical example of magnetic-shape memory (MSM) alloy Ni 49.7Mn 29.3Ga 21 was carried out with a 2D position sensitive detector. The quality and inhomogeneity of the single crystal and martensite variant distribution was studied using ω-scan of selected nuclear Bragg reflections. The neutron diffraction reveals split of the (2 0 0) reflection of major martensite variant and large structural inhomogeneities in martensite phase. Using measurement in reciprocal space, we recorded a set of reflections that appear due to structural modulation (5 M) of the martensite, however, the set seems to be incomplete with missing or very weak reflections of second order compared with X-ray diffraction. The line of the magnetic reflection arising from the supposed antiferromagnetic ordering of the excess Mn atoms was very weak and it is difficult to discern from the background.

  11. Increasing 13C CP-MAS NMR resolution using single crystals: application to model octaethyl porphyrins.

    Science.gov (United States)

    Dugar, Sneha; Fu, Riqiang; Dalal, Naresh S

    2012-08-02

    Octaethyl porphyrin (OEP) and its Ni and Zn derivatives are considered as model compounds in biochemical, photophysical, and fossil fuel chemistry. They have thus been investigated by high-resolution solid-state (13)C NMR using powders, but peak assignment has been difficult because of large line widths. Arguing that a significant cause of broadening might be the anisotropic bulk magnetic susceptibility, we utilized single crystals in our (13)C cross-polarization magic angle spinning (CP-MAS) measurements and observed a nearly 2-fold line narrowing. This enhanced resolution enabled us to assign chemical shifts to each carbon for all the three compounds. The new assignments are now in agreement with X-ray structural data and allowed us to probe the motional dynamics of the methyl and methylene carbons of the OEP side chains. It is apparent that the use of single crystals in (13)C CP-MAS measurements has a significantly wider impact than previously thought.

  12. Thin films of metal oxides on metal single crystals: Structure and growth by scanning tunneling microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Galloway, Heather Claire [Univ. of California, Berkeley, CA (United States)

    1995-12-01

    Detailed studies of the growth and structure of thin films of metal oxides grown on metal single crystal surfaces using Scanning Tunneling Microscopy (STM) are presented. The oxide overlayer systems studied are iron oxide and titanium oxide on the Pt(III) surface. The complexity of the metal oxides and large lattice mismatches often lead to surface structures with large unit cells. These are particularly suited to a local real space technique such as scanning tunneling microscopy. In particular, the symmetry that is directly observed with the STM elucidates the relationship of the oxide overlayers to the substrate as well as distinguishing, the structures of different oxides.

  13. Crystal Growth and Properties of Co2+ doped Y3Sc2Ga3O12 Single Crystal

    Institute of Scientific and Technical Information of China (English)

    Guo Shiyi; Yuan Duorong; Shi Xuzhong; Cheng Xiufeng; Zhang Xiqing; Yu Fapeng

    2007-01-01

    Single crystal of cobalt (Co)-doped Y3Sc2Ga3O12 (YSGG) with the dimensions up to φ20×40mm3 and undoped YSGG crystal with the dimensions up to φ28×60mm3 have been grown using the Czochralski technique. The structure of the crystal was characterized by the X-ray powder diffraction (XRPD) method. The absorbance spectra of the crystal shows that it has strong absorption bands at 606 and 1540nm. The results indicate that the crystal Y3Sc2Ga3O12 may be a kind of good Q-switch material.

  14. Growth and Characterization of Pure and Doped L-Alanine Tartrate Single Crystals

    Directory of Open Access Journals (Sweden)

    K. Rajesh

    2013-01-01

    Full Text Available Single crystals of pure and Lanthanum doped L-Alanine Tartrate were grown by slow evaporation method. The cell parameters were determined using single crystal X-ray diffraction method. To improve the physical properties of the LAT crystal, Lanthanum dopant was added by 2 mol%. ICP studies confirm the presence of Lanthanum in the grown LAT crystal. Transparency range of the crystal was determined using UV-VIS-NIR spectrophotometer. The functional groups of pure and doped LAT crystals were analyzed by FT-IR spectroscopy. Using Vickers microhardness tester, mechanical strength of the material was found. Dielectric studies of pure and doped LAT single crystals were carried out. The doped LAT crystal is found to have efficiency higher than that of pure LAT crystal.

  15. High-Pressure Synthesis of SmFeAsO{sub 1-x}F{sub x}(x=0.2) Single Crystals

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Hyun Sook; Park, Jae Hyun; Lee, Jae Yeap; Lee, Hu Jong [Dept. of Physics, Pohang University of Science and Technology, Pohang (Korea, Republic of); Kim, Ju Young; Cho, B. K. [Materials Science and Engineering, Gwangju Institute of Science and Technology, Gwangju (Korea, Republic of); Jung, Chang Uk [Dept. of Physics, Hankuk University of Foreign Studies, Yongin (Korea, Republic of)

    2009-04-15

    Fluorine-doped SmFeAsO{sub 1-x}F{sub x} single crystals with the nominal value of x=0.2 were grown at 1350-1450 degrees C under the pressure of 3.3 GPa by using the self-flux method. Plate-shaped single crystals in the range of a few-150 {mu}m in their lateral size were obtained. The detailed crystal structure was analyzed by using the x-ray diffractometry. Superconducting transition temperature, determined by the resistive transition, of a single crystal was about 49 K with a narrow resistive transition width of {approx}K. A relatively sharp transition, a low residual resistivity, and a large residual resistivity ratio compared with those reported for REFeAsO{sub 1-x}F{sub x}(RE=Sm, Nd) single crystals indicate the high quality of our single crystals.

  16. A preliminary review of organic materials single crystal growth by the Czochralski technique

    Science.gov (United States)

    Penn, B. G.; Shields, A. W.; Frazier, D. O.

    1988-01-01

    The growth of single crystals of organic compounds by the Czochralski method is reviewed. From the literature it is found that single crystals of benzil, a nonlinear optical material with a d sub 11 value of 11.2 + or - 1.5 x d sub 11 value of alpha quartz, has fewer dislocations than generally contained in Bridgman crystals. More perfect crystals were grown by repeated Czochralski growth. This consists of etching away the defect-containing portion of a Czochralski grown crystal and using it as a seed for further growth. Other compounds used to grow single crystals are benzophenone, 12-tricosanone (laurone), and salol. The physical properties, growth apparatus, and processing conditions presented in the literature are discussed. Moreover, some of the possible advantages of growing single crystals of organic compounds in microgravity to obtain more perfect crystals than on Earth are reviewed.

  17. Multiscale Characterization of bcc Crystals Deformed to Large Extents of Strain

    Energy Technology Data Exchange (ETDEWEB)

    Florando, J; LeBlanc, M; Lassila, D; Bulatov, V; Rhee, M; Arsenlis, A; Becker, R; Jr., J M; Magid, K

    2007-02-20

    In an effort to help advance the predictive capability of LLNL's multiscale modeling program a new experimental technique has been developed to provide high fidelity data on metallic single crystals out to relatively large extents of strain. The technique uses a '6 Degrees of Freedom' testing apparatus in conjunction with a 3-D image correlation system. Utilizing this technique, a series of experiments have been performed that reveal unexpected behavior which cannot be explained using traditional crystal plasticity theory. In addition, analysis and characterization techniques have also been developed to help quantify the unexpected behavior. Interactions with multiscale modelers include the development of a possible mechanism that might explain the anomalous behavior, as well as the discovery of a new 4-node dislocation junction.

  18. Crystal growth, structural, thermal and mechanical behavior of L-arginine 4-nitrophenolate 4-nitrophenol dihydrate (LAPP) single crystals

    Science.gov (United States)

    Mahadevan, M.; Ramachandran, K.; Anandan, P.; Arivanandhan, M.; Bhagavannarayana, G.; Hayakawa, Y.

    2014-12-01

    Single crystals of L-arginine 4-nitrophenolate 4-nitrophenol dihydrate (LAPP) have been grown successfully from the solution of L-arginine and 4-nitrophenol. Slow evaporation of solvent technique was adopted to grow the bulk single crystals. Single crystal X-ray diffraction analysis confirms the grown crystal has monoclinic crystal system with space group of P21. Powder X-ray diffraction analysis shows the good crystalline nature. The crystalline perfection of the grown single crystals was analyzed by HRXRD by employing a multicrystal X-ray diffractometer. The functional groups were identified from proton NMR spectroscopic analysis. Linear and nonlinear optical properties were determined by UV-Vis spectrophotometer and Kurtz powder technique respectively. It is found that the grown crystal has no absorption in the green wavelength region and the SHG efficiency was found to be 2.66 times that of the standard KDP. The Thermal stability of the crystal was found by obtaining TG/DTA curve. The mechanical behavior of the grown crystal has been studied by Vicker's microhardness method.

  19. Ignition and growth modeling of detonation reaction zone experiments on single crystals of PETN and HMX

    Science.gov (United States)

    White, Bradley W.; Tarver, Craig M.

    2017-01-01

    It has long been known that detonating single crystals of solid explosives have much larger failure diameters than those of heterogeneous charges of the same explosive pressed or cast to 98 - 99% theoretical maximum density (TMD). In 1957, Holland et al. demonstrated that PETN single crystals have failure diameters of about 8 mm, whereas heterogeneous PETN charges have failure diameters of less than 0.5 mm. Recently, Fedorov et al. quantitatively determined nanosecond time resolved detonation reaction zone profiles of single crystals of PETN and HMX by measuring the interface particle velocity histories of the detonating crystals and LiF windows using a PDV system. The measured reaction zone time durations for PETN and HMX single crystal detonations were approximately 100 and 260 nanoseconds, respectively. These experiments provided the necessary data to develop Ignition and Growth (I&G) reactive flow model parameters for the single crystal detonation reaction zones. Using these parameters, the calculated unconfined failure diameter of a PETN single crystal was 7.5 +/- 0.5 mm, close to the 8 mm experimental value. The calculated failure diameter of an unconfined HMX single crystal was 15 +/- 1 mm. The unconfined failure diameter of an HMX single crystal has not yet been determined precisely, but Fedorov et al. detonated 14 mm diameter crystals confined by detonating a HMX-based plastic bonded explosive (PBX) without initially overdriving the HMX crystals.

  20. Large-pitch kagome-structured hollow-core photonic crystal fiber

    Science.gov (United States)

    Couny, F.; Benabid, F.; Light, P. S.

    2006-12-01

    We report the fabrication and characterization of a new type of hollow-core photonic crystal fiber based on large-pitch (˜12μm) kagome lattice cladding. The optical characteristics of the 19-cell, 7-cell, and single-cell core defect fibers include broad optical transmission bands covering the visible and near-IR parts of the spectrum with relatively low loss and low chromatic dispersion, no detectable surface modes and high confinement of light in the core. Various applications of such a novel fiber are also discussed, including gas sensing, quantum optics, and high harmonic generation.

  1. Growth of ZnO Single Crystal by Chemical Vapor Transport Method

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    ZnO crystals were grown by CVT method in closed quartz tube under seeded condition. Carbon was used as a transport agent to enhance the chemical transport of ZnO in the growth process. ZnO single crystals were grown by using GaN/sapphire and GaN/Si wafer as seeds. The property and crystal quality of the ZnO single crystals was studied by photoluminescence spectroscopy and X-ray diffraction technique.

  2. Fabrication and performance of a single-crystal lead magnesium niobate-lead titanate cylindrical hydrophone.

    Science.gov (United States)

    Brown, Jeremy A; Dunphy, Kevin; Leadbetter, Jeff R; Adamson, Robert B A; Beslin, Olivier

    2013-08-01

    The development of a piezoelectric hydrophone based on lead magnesium niobate-lead titanate [PbMg1/3Nb2/3O3-PbTiO3 (PMN-PT)] single-crystal piezoelectric as the hydrophone substrate is reported. Although PMN-PT can possess much higher piezoelectric sensitivity than traditional lead zirconate titanate (PZT) piezoelectrics, it is highly anisotropic and therefore there is a large gain in sensitivity only when the crystal structure is oriented in a specific direction. Because of this, simply replacing the PZT substrate with a PMN-PT cylinder is not an optimal solution because the crystal orientation does not uniformly align with the circumferential axis of the hydrophone. Therefore, a composite hydrophone that maintains the optimal crystal axis around the hydrophone circumference has been developed. An 11.3 mm diameter composite hydrophone cylinder was fabricated from a single cut PMN-PT rectangular plate. Solid end caps were applied to the cylinder and the sensitivity was directly compared with a solid PZT-5A cylindrical hydrophone of equal dimensions in a hydrophone test tank. The charge sensitivity showed a 9.1 dB improvement over the PZT hydrophone and the voltage sensitivity showed a 3.5 dB improvement. This was in good agreement with the expected theoretical improvements of 10.1 and 4.5 dB, respectively.

  3. Twin nucleation and migration in FeCr single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Patriarca, L. [Politecnico di Milano, Department of Mechanical Engineering, Via La Masa 34, I-20156 Milano (Italy); Abuzaid, Wael [Department of Mechanical Science and Engineering, University of Illinois at Urbana-Champaign, 1206 W. Green St., Urbana, IL 61801 (United States); Sehitoglu, Huseyin, E-mail: huseyin@illinois.edu [Department of Mechanical Science and Engineering, University of Illinois at Urbana-Champaign, 1206 W. Green St., Urbana, IL 61801 (United States); Maier, Hans J. [Lehrstuhl fuer Werkstoffkunde (Materials Science), University of Paderborn, 33095 Paderborn (Germany); Chumlyakov, Y. [Physics of Plasticity and Strength of Materials Laboratory, Siberian Physical and Technical Institute, 634050 Tomsk (Russian Federation)

    2013-01-15

    Tension and compression experiments were conducted on body-centered cubic Fe -47.8 at pct. Cr single crystals. The critical resolved shear stress (CRSS) magnitudes for slip nucleation, twin nucleation and twin migration were established. We show that the nucleation of slip occurs at a CRSS of about 88 MPa, while twinning nucleates at a CRSS of about 191 MPa with an associated load drop. Following twin nucleation, twin migration proceeds at a CRSS that is lower than the initiation stress ( Almost-Equal-To 114-153 MPa). The experimental results of the nucleation stresses indicate that the Schmid law holds to a first approximation for the slip and twin nucleation cases, but to a lesser extent for twin migration particularly when considerable slip strains preceded twinning. The CRSSs were determined experimentally using digital image correlation (DIC) in conjunction with electron back scattering diffraction (EBSD). The DIC measurements enabled pinpointing the precise stress on the stress-strain curves where twins or slip were activated. The crystal orientations were obtained using EBSD and used to determine the activated twin and slip systems through trace analysis. - Highlights: Black-Right-Pointing-Pointer Digital image correlation allows to capture slip/twin initiation for bcc FeCr. Black-Right-Pointing-Pointer Crystal orientations from EBSD allow slip/twin system indexing. Black-Right-Pointing-Pointer Nucleation of slip always precedes twinning. Black-Right-Pointing-Pointer Twin growth is sustained with a lower stress than required for nucleation. Black-Right-Pointing-Pointer Twin-slip interactions provide high hardening at the onset of plasticity.

  4. Growth of Bi-2212 single crystals by a horizontal Bridgman method using different oxygen pressure

    Energy Technology Data Exchange (ETDEWEB)

    Fujiwara, M.; Makino, T.; Nakabayashi, T. [Department of Electrical and Electronic Engineering, Tottori University, Koyama-Minami, Tottori 680-8552 (Japan); Tanaka, H. [Yonago National College of Technology, 4448 Hikona Yonago, Tottori 683-8502 (Japan); Kinoshita, K., E-mail: kinoshita@ele.tottori-u.ac.j [Department of Electrical and Electronic Engineering, Tottori University, Koyama-Minami, Tottori 680-8552 (Japan); Kishida, S. [Department of Electrical and Electronic Engineering, Tottori University, Koyama-Minami, Tottori 680-8552 (Japan)

    2009-10-15

    We compared the crystallinity of the Bi-2212 single crystals grown by the horizontal Bridgman (HB) method with those grown by the vertical Bridgman (VB) method in terms of resistivity, rho. It was clarified that crystals far inside the ingot grown by HB method showed the equivalent crystallinity to crystals grown by VB method, whereas crystals near the surface of the ingot grown by HB method showed the similar crystallinity to crystals grown by TSFZ method, which is sensitive to the growth atmosphere.

  5. Optically pumped lasing in single crystals of organometal halide perovskites prepared by cast-capping method

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen, Van-Cao; Katsuki, Hiroyuki; Yanagi, Hisao, E-mail: yanagi@ms.naist.jp [Graduate School of Materials Science, Nara Institute of Science and Technology (NAIST), 8916-5 Takayama, Ikoma, Nara 630-0192 (Japan); Sasaki, Fumio [Electronics and Photonics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST), 1-1-1 Umezono, Tsukuba, Ibaraki 305-8568 (Japan)

    2016-06-27

    A simple “cast-capping” method is adopted to prepare single-crystal perovskites of methyl ammonium lead bromide (CH{sub 3}NH{sub 3}PbBr{sub 3}). By capping a CH{sub 3}NH{sub 3}PbBr{sub 3} solution casted on one substrate with another substrate such as glass, mica, and distributed Bragg reflector (DBR), the slow evaporation of solvent enables large-size cubic crystals to grow between the two substrates. Under optical pumping, edge-emitting lasing is observed based on Fabry–Pérot resonation between parallel side facets of a strip-shaped crystal typically with a lateral cavity length of a few tens of μm. On the other hand, vertical-cavity surface-emitting lasing (VCSEL) is obtained from a planar crystal grown between two DBRs with a cavity thickness of a few μm. Simultaneous detection of those edge- and surface-emissions reveals that the threshold excitation fluence of VCSEL is higher than that of the edge-emitting lasing due to thickness gradient in the planar crystal.

  6. Tb-Dy-Fe Single Crystal and Magnetostrictive Actuator Using These Materials

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Magnetostrictive actuators normally use twin-crystal magnetostrictive materials as driving unit. Because the crystal and twin-crystal plane hinder the movement of the domain wall, its displacement output of low magnetic strength is rather small. Using Tb-Dy-Fe single crystal technique can effectively solve the problems brought by pollution and twin crystals, and produce high-quality Tb-Dy-Fe single crystal materials. The paper will introduce the technique of using these materials to produce magnetostrictive actuators that possess high sensitivity and resolution and use pulse feeding.

  7. Growth and Characterization of Pure and Doped L-Alanine Tartrate Single Crystals

    OpenAIRE

    K. Rajesh; B. Milton Boaz; P. Praveen Kumar

    2013-01-01

    Single crystals of pure and Lanthanum doped L-Alanine Tartrate were grown by slow evaporation method. The cell parameters were determined using single crystal X-ray diffraction method. To improve the physical properties of the LAT crystal, Lanthanum dopant was added by 2 mol%. ICP studies confirm the presence of Lanthanum in the grown LAT crystal. Transparency range of the crystal was determined using UV-VIS-NIR spectrophotometer. The functional groups of pure and doped LAT crystals were a...

  8. Studies on synthesis, growth, structural, optical properties of organic 8-hydroxyquinolinium succinate single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Thirumurugan, R., E-mail: singlecrystalxrd@gmail.com; Anitha, K., E-mail: singlecrystalxrd@gmail.com [School of Physics, Madurai Kamaraj University, Madurai-625021 (India)

    2014-04-24

    8-hydroxyquinolinium succinate (8HQSU), an organic material has been synthesized and single crystals were grown by employing the technique of slow evaporation. The structure of the grown crystal was elucidated by using single crystal X-ray diffraction analysis. 8HQSU crystal belongs to the monoclinic crystallographic system with non-centro symmetric space group of P2{sub 1}. FT-IR spectral investigation has been carried out to identify the various functional groups present in the grown crystal. UV–vis spectral studies reveal that 8HQSU crystals are transparent in the entire visible region and the cut-off wavelength has been found to be 220nm.

  9. Anisotropic magnetic properties and superzone gap formation in CeGe single crystal.

    Science.gov (United States)

    Das, Pranab Kumar; Kumar, Neeraj; Kulkarni, R; Dhar, S K; Thamizhavel, A

    2012-04-11

    Single crystals of CeGe and its non-magnetic analog LaGe have been grown by the Czochralski method. The CeGe compound crystallizes in the orthorhombic FeB-type crystal structure with the space group Pnma (#62). The anisotropic magnetic properties have been investigated for well oriented single crystals by measuring the magnetic susceptibility, electrical resistivity and heat capacity. It has been found that CeGe orders antiferromagnetically at 10.5 K. Both transport and magnetic studies have revealed large anisotropy, reflecting the orthorhombic crystal structure. The magnetization data at 1.8 K reveal metamagnetic transitions along the [010] direction at 4.8 and 6.4 T and along the [100] direction at a critical field of 10.7 T, while the magnetization along the [001] direction increases linearly without any anomaly up to a field of 16 T. From the magnetic susceptibility and the magnetization measurements it has been found that the [010] direction is the easy axis of magnetization. The electrical resistivity along the three crystallographic directions exhibits an upturn at T(N), indicating superzone gap formation below T(N) in this compound. We have performed crystal electric field analysis on the magnetic susceptibility and the heat capacity data and found that the ground state is a doublet, and the energies of splitting from the ground state to the first and second excited doublet states were estimated to be 39 and 111 K, respectively.

  10. Solidification microstructures in single-crystal stainless steel melt pools

    Energy Technology Data Exchange (ETDEWEB)

    Sipf, J.B.; Boatner, L.A.; David, S.A.

    1994-03-01

    Development of microstructure of stationary melt pools of oriented stainless steel single crystals (70%Fe-15%Ni-15%Cr was analyzed. Stationary melt pools were formed by electron-beam and gas-tungsten-arc heating on (001), (011), and (111) oriented planes of the austenitic, fcc-alloy crystals. Characterization and analysis of resulting microstructure was carried out for each crystallographic plane and welding method. Results showed that crystallography which favors ``easy growth`` along the <100> family of directions is a controlling factor in the microstructural formation along with the melt-pool shape. The microstructure was found to depend on the melting method, since each method forms a unique melt-pool shape. These results are used in making a three-dimensional reconstruction of the microstructure for each plane and melting method employed. This investigation also suggests avenues for future research into the microstructural properties of electron-beam welds as well as providing an experimental basis for mathematical models for the prediction of solidification microstructures.

  11. Scintillation properties of CsI:In single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Gridin, S., E-mail: gridin.sergey@gmail.com [Institute for Scintillation Materials, 61001 Kharkov (Ukraine); Institut Lumière Matière, Lyon, 69622 Villeurbanne Cedex (France); Belsky, A. [Institut Lumière Matière, Lyon, 69622 Villeurbanne Cedex (France); Moszynski, M.; Syntfeld-Kazuch, A. [National Centre for Nuclear Research, Soltana 7, 05-400 Otwock-Swierk (Poland); Shiran, N.; Gektin, A. [Institute for Scintillation Materials, 61001 Kharkov (Ukraine)

    2014-10-11

    Scintillation properties of CsI:In single crystals have been investigated. Scintillation yield of CsI:In measured with the 24 μs integration time is around 27,000 ph/MeV, reaching the saturation at 0.005 mol% of the activator. However, luminescence yield of CsI:In is close to CsI:Tl scintillation crystals, which is around 60,000 ph/MeV. This difference is explained by the presence of an ultra-long afterglow in CsI:In scintillation pulse. Thermoluminescence studies revealed a stable trap around 240 K that is supposed to be related to millisecond decay components. The best measured energy resolution of (8.5±0.3)% was achieved at 24 μs peaking time for a CsI sample doped with 0.01 mol% of In. Temperature stability of CsI:In radioluminescence intensity was found to be remarkably high. Its X-ray luminescence yield remains stable up to 600 K, whereafter thermal quenching occurs. The latter property gives CsI:In a potential to be used in well logging applications.

  12. Ion implantation of CdTe single crystals

    Directory of Open Access Journals (Sweden)

    Wiecek Tomasz

    2017-01-01

    Full Text Available Ion implantation is a technique which is widely used in industry for unique modification of metal surface for medical applications. In semiconductor silicon technology ion implantation is also widely used for thin layer electronic or optoelectronic devices production. For other semiconductor materials this technique is still at an early stage. In this paper based on literature data we present the main features of the implantation of CdTe single crystals as well as some of the major problems which are likely to occur when dealing with them. The most unexpected feature is the high resistance of these crystals against the amorphization caused by ion implantation even at high doses (1017 1/cm2. The second property is the disposal of defects much deeper in the sample then it follows from the modeling calculations. The outline of principles of the ion implantation is included in the paper. The data based on RBS measurements and modeling results obtained by using SRIM software were taken into account.

  13. From Protein Structure to Function via Single Crystal Optical Spectroscopy

    Directory of Open Access Journals (Sweden)

    Luca eRonda

    2015-04-01

    Full Text Available The more than 100.000 protein structures determined by X-ray crystallography provide a wealth of information for the characterization of biological processes at the molecular level. However, several crystallographic artifacts, including conformational selection, crystallization conditions and radiation damages, may affect the quality and the interpretation of the electron density map, thus limiting the relevance of structure determinations. Moreover, for most of these structures no functional data have been obtained in the crystalline state, thus posing serious questions on their validity in the inference for protein mechanisms. In order to solve these issues, spectroscopic methods have been applied for the determination of equilibrium and kinetic properties of proteins in the crystalline state. These methods are UV-vis spectrophotometry, spectrofluorimetry, IR, EPR, Raman and resonance Raman spectroscopy. Some of these approaches have been implemented with on-line instruments at X-ray synchrotron beamlines. Here, we provide an overview of investigations predominantly carried out in our laboratory by single crystal polarized absorption UV-vis microspectrophotometry, the most applied technique for the functional characterization of proteins in the crystalline state. Studies on hemoglobins, pyridoxal 5’-phosphate dependent enzymes and green fluorescent protein in the crystalline state have addressed key biological issues, leading to either straightforward structure-function correlations or limitations to structure-based mechanisms.

  14. The growth of Nd:CaWO4 single crystals

    Directory of Open Access Journals (Sweden)

    ALEKSANDAR GOLUBOVIC

    2003-12-01

    Full Text Available CaWO4 doped with 0.8 % at. Nd (Nd:CaWO4 single crystals were grown from the melt in air by the Czochralski technique. The critical diameter dc = 1.0 cm and the critical rate of rotation wc = 30 rpm were calculated from hydrodynamic equations for buoyancy-driven and forced convection. The rate of crystal growth was experimentally obtained to be 6.7 mm/h. For chemical polishing, a solution of 1 part saturated chromic acid (CrO3 in water and 3 parts conc. H3PO4 (85 % at 433 K with an exposure time of 2 h was found to be adequate. A mixture of 1 part concentrated HF and 2 parts chromic acid at room temperature after exposure for 30 min was found to be a suitable etching solution. The lattice parameters a = 0.52404 (6 nm, c = 1.1362 (6 nm and V0 = 0.312 (2 nm3 were determined by X-ray powder diffraction. The obtained results are discussed and compared with published data.

  15. Ion implantation of CdTe single crystals

    Science.gov (United States)

    Wiecek, Tomasz; Popovich, Volodymir; Bester, Mariusz; Kuzma, Marian

    2016-12-01

    Ion implantation is a technique which is widely used in industry for unique modification of metal surface for medical applications. In semiconductor silicon technology ion implantation is also widely used for thin layer electronic or optoelectronic devices production. For other semiconductor materials this technique is still at an early stage. In this paper based on literature data we present the main features of the implantation of CdTe single crystals as well as some of the major problems which are likely to occur when dealing with them. The most unexpected feature is the high resistance of these crystals against the amorphization caused by ion implantation even at high doses (1017 1/cm2). The second property is the disposal of defects much deeper in the sample then it follows from the modeling calculations. The outline of principles of the ion implantation is included in the paper. The data based on RBS measurements and modeling results obtained by using SRIM software were taken into account.

  16. Characterization of CuInSe{sub 2} single crystal

    Energy Technology Data Exchange (ETDEWEB)

    Shaban, H.T. [Physics Department, Faculty of Science, South Valley University, Qena (Egypt)]. E-mail: htsh2@yahoo.com; Mobarak, M. [Physics Department, Faculty of Science, South Valley University, Qena (Egypt); Nassary, M.M. [Physics Department, Faculty of Science, South Valley University, Qena (Egypt)

    2007-02-15

    High quality CuInSe{sub 2} (CIS) single crystals grown by the vertical Bridgman method. The electrical conductivity, Hall coefficient and thermoelectric power were measured as a function of temperature. The energy gap was found 1.04eV. The crystals were characterized structurally by X-ray diffraction and compositionally by microprobe analyses. Throughout joining the electrical with thermoelectric power measurements many physical parameters were estimated. The effective mass of holes m{sub p}* and electrons m{sub n}* were determined at room temperature and found to be 1.66x10{sup -30} and 8.6x10{sup -36}kg, respectively. Also, at the same temperature the mobility was found to be 956cm{sup 2}/Vs. The hole and electron diffusion coefficients were found to be 23.9 and 35.85cm{sup 2}/s. The relaxation times for holes and electrons were calculated and yielded the values 9.9x10{sup -13} and 7.7x10{sup -18}s, respectively. The diffusion length for holes and electrons was obtained as L{sub p}=4.86x10{sup -6}cm and L{sub n}=16.61x10{sup -9}cm.

  17. Radionuclide annular single crystal scintillator camera with rotating collimator

    Energy Technology Data Exchange (ETDEWEB)

    Genna, S.; Pang, S.-C.

    1986-04-22

    A radionuclide emission tomography camera is described for sensing gamma ray emissions from a source within the field of view consisting of: a fixed, position-sensitive detector means, responsive to the gamma ray emissions and surrounding the field of view for detecting the contact position and the trajectory from which a gamma ray emission originates, the fixed, position-sensitive detector including a single continuous stationary scintillation crystal; rotatable collimator means, disposed between the fixed, position-sensitive detecto means and the field of view, and including at least one array of collimator elements, for restricting and collimating the gamma ray emissions; and means for rotating the collimator means relative to the fixed, position-sensitive detector, for exposing different sections of the position-sensitive detector to the gamma ray emissions in order to view the source from different angles.

  18. Shock Hugoniot behavior of single crystal titanium using atomistic simulations

    Science.gov (United States)

    Mackenchery, Karoon; Dongare, Avinash

    2017-01-01

    Atomistic shock simulations are performed for single crystal titanium using four different interatomic potentials at impact velocities ranging from 0.5 km/s to 2.0 km/s. These potentials comprise of three parameterizations in the formulation of the embedded atom method and one formulation of the modified embedded atom method. The capability of the potentials to model the shock deformation and failure behavior is investigated by computing the shock hugoniot response of titanium and comparing to existing experimental data. In addition, the capability to reproduce the shock induced alpha (α) to omega (ω) phase transformation seen in Ti is investigated. The shock wave structure is discussed and the velocities for the elastic, plastic and the α-ω phase transformation waves are calculated for all the interatomic potentials considered.

  19. Phonon interactions with methyl radicals in single crystals

    Directory of Open Access Journals (Sweden)

    James W. Wells

    2017-04-01

    Full Text Available The high temperature ESR spectra’s anomalous appearance at very low temperatures for the methyl radical created in single crystals is explained by magnetic dipole interactions with neighboring protons. These protons acting via phonon vibrations induce resonant oscillations with the methyl group to establish a very temperature sensitive ‘‘relaxation’’ mode that allows the higher energy ‘‘E’’ state electrons with spin 12 to ‘‘decay’’ into ‘‘A’’ spin 12 states. Because of the amplitude amplification with temperature, the ‘‘E’’ state population is depleted and the ‘‘A’’ state population augmented to produce the high temperature ESR spectrum. This phenomenon is found to be valid for all but the very highest barriers to methyl group tunneling. In support, a time dependent spin population study shows this temperature evolution in the state populations under this perturbation.

  20. InPBi single crystals grown by molecular beam epitaxy.

    Science.gov (United States)

    Wang, K; Gu, Y; Zhou, H F; Zhang, L Y; Kang, C Z; Wu, M J; Pan, W W; Lu, P F; Gong, Q; Wang, S M

    2014-06-26

    InPBi was predicted to be the most robust infrared optoelectronic material but also the most difficult to synthesize within In-VBi (V = P, As and Sb) 25 years ago. We report the first successful growth of InPBi single crystals with Bi concentration far beyond the doping level by gas source molecular beam epitaxy. The InPBi thin films reveal excellent surface, structural and optical qualities making it a promising new III-V compound family member for heterostructures. The Bi concentration is found to be 2.4 ± 0.4% with 94 ± 5% Bi atoms at substitutional sites. Optical absorption indicates a band gap of 1.23 eV at room temperature while photoluminescence shows unexpectedly strong and broad light emission at 1.4-2.7 μm which can't be explained by the existing theory.

  1. Thermal conductivity of single crystal and ceramic AlN

    Science.gov (United States)

    AlShaikhi, A.; Srivastava, G. P.

    2008-04-01

    We have applied the Callaway theory and used a detailed account of three-phonon scattering processes to calculate the thermal conductivity of three AlN single crystal samples containing different amounts of oxygen and two AlN ceramic samples with different grain sizes and oxygen contamination levels. The N-drift contribution to the total conductivity has been quantified. The influence on the thermal conductivity of oxygen-related defects, and grain boundaries in ceramic samples, has been investigated. The theoretical results obtained from this work are in good agreement with available experimental data. Our calculations suggest that the "effective" boundary length is greater than the reported grain size for each of the two ceramic samples studied by Watari et al. [J. Mater. Res. 17, 2940 (2002)].

  2. Low temperature properties of pnictide CrAs single crystal

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    High quality single crystal CrAs was grown by Sn flux method.The results of magnetic susceptibility and electrical resistivity are reported in a temperature range of 2 to 800 K.At low temperatures,a T2 dependence of resistivity is observed showing a Fermi-liquid behavior.The Kadowaki-Woods ratio is found to be 1×10-5 μΩ cm mol2 K2 mJ-2,which fits well to the universal value for many correlated electron systems.At about 270 K,a clear magnetic transition is observed with sharp changes of resistivity and susceptibility.Above 270 K,a linear-temperature dependence of the magnetic susceptibility is observed up to 700 K,which resembles the T-dependent magnetic susceptibility of parents of iron-pnictides superconductors.

  3. Growth of single-crystal YAG fiber optics.

    Science.gov (United States)

    Nie, Craig D; Bera, Subhabrata; Harrington, James A

    2016-07-11

    Single-crystal YAG (Y3Al5O12) fibers have been grown by the laser heated pedestal growth technique with losses as low as 0.3 dB/m at 1.06 μm. These YAG fibers are as long as about 60 cm with diameters around 330 μm. The early fibers were grown from unoriented YAG seed fibers and these fibers exhibited facet steps or ridges on the surface of the fiber. However, recently we have grown fibers using an oriented seed to grow step-free fibers. Scattering losses made on the fibers indicate that the scattering losses are equal to about 30% of the total loss.

  4. Hard x-ray single crystal bi-mirror.

    Science.gov (United States)

    Lyubomirskiy, M; Snigireva, I; Kuznetsov, S; Yunkin, V; Snigirev, A

    2015-05-15

    We report a novel hard x-ray interferometer consisting of two parallel channels manufactured in a single Si crystal by means of microfabrication technology. The sidewall surfaces of the channels, similar to mirrors, scatter at very small incident angles, acting equivalently to narrow micrometer size slits as in the Young double-slit interferometer. Experimental tests of the interferometer were performed at the ESRF ID06 beamline in the energy range from 12 to 16 keV. The interference patterns at different grazing incidence angles were recorded in the near- and far-field. Evaluation of the influence of the channel surface roughness on the visibility of interference fringes was performed. The proposed interferometer design allows the arrangement of mirrors at different split distances.

  5. Spin injection effect in thin Bi2212 single crystal

    Science.gov (United States)

    Murata, Kenichiro; Otaka, Kazuto; Yamaki, Kazuhiro; Irie, Akinobu

    2017-07-01

    The influence of spin-injection on the in-plane transport properties of thin Bi2Sr2CaCu2Oy (BSCCO) single crystal has been investigated. The in-plane transport measurements without and with spin injection were carried out at 77 K by four terminal method. The in-plane critical current was strongly reduced by injecting the current from Co/Au electrodes formed on the BSCCO bridge with 50 mm wide and 450 nm thick. Furthermore, it was observed that magnetic field dependence of the magnetoresistance shows a hysteresis loop. These results indicate that the in-plane superconductive transport property is affected by the spin-injection related to the magnetization of Co.

  6. Platinum single crystal electrodes for the electrocatalysis of methane oxidation

    Directory of Open Access Journals (Sweden)

    Mayara Munaretto

    2011-03-01

    Full Text Available The main objective of this paper is to characterize the voltammetric profiles of platinum single crystals of low Miller indexes Pt(100 and Pt(110 and study their catalytic activities on the oxidation of methane. In this way, it was developed a metallic surface modified by presence of other metal oxide, which presents catalytic activity for this reaction. It is well known that the electrooxidation of methane (CH4 leads mainly to the formation of CO2 and H2O, however, the oxidation can also lead to the formation of CO, a reaction intermediate that has strong interaction with metal surfaces, such as platinum. This molecule tends to accumulate on the platinum surface and to passive it, due to the self-poisoning, decreasing its catalytic activity. Therefore, the main aim of this work was the development of a platinum electrode modified by deposition of titanium oxide, which presented electrocatalytic properties for the oxidation of methane.

  7. Analysis of ripple formation in single crystal spot welds

    Science.gov (United States)

    Rappaz, M.; Corrigan, D.; Boatner, L. A.

    1997-01-01

    Stationary spot welds have been made at the (001) surface of Fe-l5%Ni-15%Cr single crystals using a Gas Tungsten Arc (GTA). On the top surface of the spot welds, very regular and concentric ripples were observed after solidification by differential interference color microscopy. Their height (typically 1--5 micrometers and spacing, typically approximately 60 micrometers) decreased with the radius of the pool. These ripples were successfully accounted for in terms of capillary-wave theory using the fundamental mode frequency f(sub 0) given by the first zero of the zero-order Bessel function. The spacing d between the ripples was then equated to v(sub s)/f(sub 0), where v(sub s) is the solidification rate. From the measured ripple spacing, the velocity of the pool was deduced as a function of the radius, and this velocity was in good agreement with the results of a heat-flow simulation.

  8. Lateral IBIC characterization of single crystal synthetic diamond detectors

    CERN Document Server

    Giudice, A Lo; Manfredotti, C; Marinelli, M; Milani, E; Picollo, F; Prestopino, G; Re, A; Rigato, V; Verona, C; Verona-Rinati, G; Vittone, E

    2016-01-01

    In order to evaluate the charge collection efficiency (CCE) profile of single-crystal diamond devices based on a p type/intrinsic/metal configuration, a lateral Ion Beam Induced Charge (IBIC) analysis was performed over their cleaved cross sections using a 2 MeV proton microbeam. CCE profiles in the depth direction were extracted from the cross-sectional maps at variable bias voltage. IBIC spectra relevant to the depletion region extending beneath the frontal Schottky electrode show a 100% CCE, with a spectral resolution of about 1.5%. The dependence of the width of the high efficiency region from applied bias voltage allows the constant residual doping concentration of the active region to be evaluated. The region where the electric field is absent shows an exponentially decreasing CCE profile, from which it is possible to estimate the diffusion length of the minority carriers by means of a drift-diffusion model.

  9. First indirect x-ray imaging tests with an 88-mm diameter single crystal

    Energy Technology Data Exchange (ETDEWEB)

    Lumpkin, A. H. [Fermilab; Macrander, A. T. [Argonne

    2017-02-01

    Using the 1-BM-C beamline at the Advanced Photon Source (APS), we have performed the initial indirect x - ray imaging point-spread-function (PSF) test of a unique 88-mm diameter YAG:Ce single crystal of only 100 - micron thickness. The crystal was bonded to a fiber optic plat e (FOP) for mechanical support and to allow the option for FO coupling to a large format camera. This configuration resolution was compared to that of self - supported 25-mm diameter crystals, with and without an Al reflective coating. An upstream monochromator was used to select 17-keV x-rays from the broadband APS bending magnet source of synchrotron radiation. The upstream , adjustable Mo collimators were then used to provide a series of x-ray source transverse sizes from 200 microns down to about 15-20 microns (FWHM) at the crystal surface. The emitted scintillator radiation was in this case lens coupled to the ANDOR Neo sCMOS camera, and the indirect x-ray images were processed offline by a MATLAB - based image processing program. Based on single Gaussian peak fits to the x-ray image projected profiles, we observed a 10.5 micron PSF. This sample thus exhibited superior spatial resolution to standard P43 polycrystalline phosphors of the same thickness which would have about a 100-micron PSF. Lastly, this single crystal resolution combined with the 88-mm diameter makes it a candidate to support future x-ray diffraction or wafer topography experiments.

  10. Isothermal equation of state of a lithium fluoride single crystal

    Energy Technology Data Exchange (ETDEWEB)

    Kim, K.Y.

    1975-01-01

    An isothermal equation of state of a LiF single crystal was determined from length change measurements of the specimen as a function of hydrostatic pressure up to approximately 7 kbars at 28 to 41/sup 0/C. The length change was measured with an accuracy of approximately 500 A by using a Fabry Perot type He--Ne laser interferometer for a 1-m long specimen at temperatures constant to less than 0.002/sup 0/C. Several two- and three-parameter equations of state were used in analyzing the measured pressure-volume data. The computer fit for each equation of state determines not only the value of its parameters but also the standard deviations associated with them and one dependent variable, either pressure or volume. With the parameters determined, the equations of state are extrapolated to approximately 5 megabars in order to see discrepancies. Using the Born model of ionic solids, two equations of state were derived both from a power law potential and from an exponential form for the repulsive energy of alkali metal halides and used to fit the pressure-volume data of a LiF single crystal. They are also extrapolated to approximately 5 megabars. The Birch's two-parameter equation and the Grover, Getting, and Kennedy equation are indistinguishable from the two equations of state derived from the Born model for pressures approximately equal to or less than 800 kbars within +-20 kbars. The above four equations of state also fit closely the Pagannone and Drickamer static compression data, the Christian shock wave data, and the Kormer et al. shock wave data. The isothermal bulk modulus and its first pressure derivative at atmospheric pressure and 28.83/sup 0/C are 664.5 +- 0.5 kbars and 5.40 +- 0.18, respectively, in close agreement with those values ultrasonically measured by R. A. Miller and C. S. Smith. (auth)

  11. Process development for single-crystal silicon solar cells

    Science.gov (United States)

    Bohra, Mihir H.

    Solar energy is a viable, rapidly growing and an important renewable alternative to other sources of energy generation because of its abundant supply and low manufacturing cost. Silicon still remains the major contributor for manufacturing solar cells accounting for 80% of the market share. Of this, single-crystal solar cells account for half of the share. Laboratory cells have demonstrated 25% efficiency; however, commercial cells have efficiencies of 16% - 20% resulting from a focus on implementation processes geared to rapid throughput and low cost, thereby reducing the energy pay-back time. An example would be the use of metal pastes which dissolve the dielectric during the firing process as opposed to lithographically defined contacts. With current trends of single-crystal silicon photovoltaic (PV) module prices down to 0.60/W, almost all other PV technologies are challenged to remain cost competitive. This presents a unique opportunity in revisiting the PV cell fabrication process and incorporating moderately more expensive IC process practices into PV manufacturing. While they may drive the cost toward a 1/W benchmark, there is substantial room to "experiment", leading to higher efficiencies which will help maintain the overall system cost. This work entails a turn-key process designed to provide a platform for rapid evaluation of novel materials and processes. A two-step lithographic process yielding a baseline 11% - 13% efficient cell is described. Results of three studies have shown improvements in solar cell output parameters due to the inclusion of a back-surface field implant, a higher emitter doping and also an additional RCA Clean.

  12. Macroscopic inhomogeneous deformation behavior arising in single crystal Ni-Mn-Ga foils under tensile loading

    Science.gov (United States)

    Murasawa, Go; Yeduru, Srinivasa R.; Kohl, Manfred

    2016-12-01

    This study investigated macroscopic inhomogeneous deformation occurring in single-crystal Ni-Mn-Ga foils under uniaxial tensile loading. Two types of single-crystal Ni-Mn-Ga foil samples were examined as-received and after thermo-mechanical training. Local strain and the strain field were measured under tensile loading using laser speckle and digital image correlation. The as-received sample showed a strongly inhomogeneous strain field with intermittence under progressive deformation, but the trained sample result showed strain field homogeneity throughout the specimen surface. The as-received sample is a mainly polycrystalline-like state composed of the domain structure. The sample contains many domain boundaries and large domain structures in the body. Its structure would cause large local strain band nucleation with intermittence. However, the trained one is an ideal single-crystalline state with a transformation preferential orientation of variants after almost all domain boundary and large domain structures vanish during thermo-mechanical training. As a result, macroscopic homogeneous deformation occurs on the trained sample surface during deformation.

  13. Studies on crystal growth and physical properties of 4-(dimethylamino)benzaldehyde-2,4-dinitroaniline single crystal

    Science.gov (United States)

    Jebin, R. P.; Suthan, T.; Rajesh, N. P.; Vinitha, G.; Dhas, S. A. Britto

    2016-07-01

    The organic material 4-(dimethylamino)benzaldehyde-2,4-dinitroaniline has been grown by slow evaporation technique. Single crystal and Powder X-ray diffraction studies have been carried out to conform the grown crystal. FTIR and FT-Raman spectra were recorded to identify the functional groups present in the crystal. The optical property of the grown crystal was analysed by UV-Vis-NIR measurement. The thermal property of the grown crystal was analysed by thermogravimetric (TG) and differential thermal analyses (DTA). Thermal diffusivity of the grown crystal was analysed by Photo acoustic spectroscopic (PAS) studies. The third order nonlinear optical properties of 4-(dimethylamino)benzaldehyde-2,4-dinitroaniline was measured by the Z-scan technique using 532 nm diode pumped continuous wave (CW) Nd:YAG laser. The mechanical property of the grown crystal was analysed by using microhardness studies.

  14. Large-surface-area diamond (111) crystal plates for applications in high-heat-load wavefront-preserving x-ray crystal optics

    CERN Document Server

    Stoupin, S; Butler, J E; Kolyadin, A V; Katrusha, A

    2016-01-01

    We report fabrication and results of high-resolution X-ray topography characterization of diamond single crystal plates with a large surface area (10$\\times$10 mm$^2$) and (111) crystal surface orientation for applications in high-heat-load X-ray crystal optics. The plates were fabricated by laser cutting of the (111) facets of diamond crystals grown using high-pressure high-temperature method. The intrinsic crystal quality of a selected 3$\\times$7~mm$^2$ crystal region of one of the studied samples was found to be suitable for applications in wavefront-preserving high-heat-load crystal optics. The wavefront characterization was performed using sequential X-ray diffraction topography in the pseudo plane wave configuration and data analysis using rocking curve topography. The variation of the rocking curve width and peak position measured with a spatial resolution of 13$\\times$13 $\\mu m^2$ over the selected region were found to be less than one microradian.

  15. Large-surface-area diamond (111) crystal plates for applications in high-heat-load wavefront-preserving X-ray crystal optics.

    Science.gov (United States)

    Stoupin, Stanislav; Antipov, Sergey; Butler, James E; Kolyadin, Alexander V; Katrusha, Andrey

    2016-09-01

    Fabrication and results of high-resolution X-ray topography characterization of diamond single-crystal plates with large surface area (10 mm × 10 mm) and (111) crystal surface orientation for applications in high-heat-load X-ray crystal optics are reported. The plates were fabricated by laser-cutting of the (111) facets of diamond crystals grown using high-pressure high-temperature methods. The intrinsic crystal quality of a selected 3 mm × 7 mm crystal region of one of the studied samples was found to be suitable for applications in wavefront-preserving high-heat-load crystal optics. Wavefront characterization was performed using sequential X-ray diffraction topography in the pseudo plane wave configuration and data analysis using rocking-curve topography. The variations of the rocking-curve width and peak position measured with a spatial resolution of 13 µm × 13 µm over the selected region were found to be less than 1 µrad.

  16. Extra-large crystal emulsion detectors towards future large-scale experiments

    CERN Document Server

    Ariga, T; Kuwabara, K; Morishima, K; Moto, M; Nishio, A; Scampoli, P; Vladymyrov, M

    2015-01-01

    Photographic emulsion is a particle tracking device which features the best spatial resolution among particle detectors. Some applications of such a detector, for example the imaging of large object with cosmic-ray muons (muon radiography) or the detection of neutrinos, require large-scale detectors. Therefore, a huge amount of detector area has to be analyzed by means of automated optical microscopes. An improvement of the readout speed is then a crucial point to make these applications possible and one way to pursue it is the availability of new type of photographic emulsions featuring a bigger silver crystal size. This would allow a lower magnification for the microscopes, a consequent larger field of view and then a faster data analysis. In this framework, we developed new types of emulsion detectors with a crystal size of 600-1000 nm, namely 3-5 times larger than the conventional ones. This would allow a 25 times faster data readout. These new photographic emulsions have shown a sufficient sensitivity an...

  17. Prediction of recrystallisation in single crystal nickel-based superalloys during investment casting

    Directory of Open Access Journals (Sweden)

    Panwisawas Chinnapat

    2014-01-01

    Full Text Available Production of gas turbines for jet propulsion and power generation requires the manufacture of turbine blades from single crystal nickel-based superalloys, most typically using investment casting. During the necessary subsequent solution heat treatment, the formation of recrystallised grains can occur. The introduction of grain boundaries into a single crystal component is potentially detrimental to performance, and therefore manufacturing processes and/or component geometries should be designed to prevent their occurrence. If the boundaries have very low strength, they can degrade the creep and fatigue properties. The root cause for recrystallisation is microscale plasticity caused by differential thermal contraction of metal, mould and core; when the plastic deformation is sufficiently large, recrystallisation takes place. In this work, numerical and thermo-mechanical modelling is carried out, with the aim of establishing computational methods by which recrystallisation during the heat treatment of single crystal nickel-based superalloys can be predicted and prevented prior to their occurrence. Elasto-plastic law is used to predict the plastic strain necessary for recrystallisation. The modelling result shows that recrystallisation is most likely to occur following 1.5–2.5% plastic strain applied at temperatures between 1000 ∘C and 1300 ∘C; this is validated with tensile tests at these elevated temperatures. This emphasises that high temperature deformation is more damaging than low temperature deformation.

  18. Cu-Al-Ni Shape Memory Single Crystal Wires with High Transformation Temperature

    Science.gov (United States)

    Hautcoeur, Alain; Fouché, Florian; Sicre, Jacques

    2016-01-01

    CN-250X is a new material with higher performance than Nickel-Titanium Shape Memory Alloy (SMA). For space mechanisms, the main disadvantage of Nickel-Titanium Shape Memory Alloy is the limited transformation temperature. The new CN-250X Nimesis alloy is a Cu-Al-Ni single crystal wire available in large quantity because of a new industrial process. The triggering of actuators made with this Cu-Al-Ni single crystal wire can range from ambient temperature to 200 C in cycling and even to 250 C in one-shot mode. Another advantage of CN-250X is a better shape recovery (8 to 10%) than Ni-Ti (6 to 7%). Nimesis is the first company able to produce this type of material with its new special industrial process. A characterization study is presented in this work, including the two main solicitation modes for this material: tensile and torsion. Different tests measure the shape recovery of Cu-Al-Ni single crystals wires during heating from room temperature to a temperature higher than temperature of end of martensitic transformation.

  19. Sensitive X-ray detectors made of methylammonium lead tribromide perovskite single crystals

    Science.gov (United States)

    Wei, Haotong; Fang, Yanjun; Mulligan, Padhraic; Chuirazzi, William; Fang, Hong-Hua; Wang, Congcong; Ecker, Benjamin R.; Gao, Yongli; Loi, Maria Antonietta; Cao, Lei; Huang, Jinsong

    2016-05-01

    The large mobilities and carrier lifetimes of hybrid perovskite single crystals and the high atomic numbers of Pb, I and Br make them ideal for X-ray and gamma-ray detection. Here, we report a sensitive X-ray detector made of methylammonium lead bromide perovskite single crystals. A record-high mobility-lifetime product of 1.2 × 10-2 cm2 V-1 and an extremely small surface charge recombination velocity of 64 cm s-1 are realized by reducing the bulk defects and passivating surface traps. Single-crystal devices with a thickness of 2-3 mm show 16.4% detection efficiency at near zero bias under irradiation with continuum X-ray energy up to 50 keV. The lowest detectable X-ray dose rate is 0.5 μGyair s-1 with a sensitivity of 80 μC Gy-1air cm-2, which is four times higher than the sensitivity achieved with α-Se X-ray detectors. This allows the radiation dose applied to a human body to be reduced for many medical and security check applications.

  20. Digital microfluidic high-throughput printing of single metal-organic framework crystals.

    Science.gov (United States)

    Witters, Daan; Vergauwe, Nicolas; Ameloot, Rob; Vermeir, Steven; De Vos, Dirk; Puers, Robert; Sels, Bert; Lammertyn, Jeroen

    2012-03-08

    The first microfluidic method for accurately depositing monodisperse single MOF crystals is presented, enabling unprecedented high-throughput, yet flexible single-crystal printing. Individual droplets of MOF precursor solutions are actuated over a matrix of hydrophilic-in-hydrophobic micropatterns for the controlled generation of femtoliter droplets. As such, thousands of monodisperse single MOF crystals are printed per second in a desired pattern, without the use of impractically expensive equipment.

  1. The Strength of PIN-PMN-PT Single Crystals under Bending with a Longitudinal Electric Field

    Science.gov (United States)

    2011-04-06

    The strength of PIN– PMN – PT single crystals under bending with a longitudinal electric field This article has been downloaded from IOPscience. Please...COVERED 00-00-2011 to 00-00-2011 4. TITLE AND SUBTITLE The Strength Of PIN- PMN - PT Single Crystals Under Bending With A Longitudinal Electric Field... PMN ? PT ) single crystals was measured using a four point bending apparatus with a longitudinal electric field applied to the bar during bending. The

  2. Synthesis, Crystal Growth and Characterization of bis Dl-Valine Picrate Single Crystal for Second-Order Nonlinear Optical Applications

    Science.gov (United States)

    Silambarasan, A.; Krishna Kumar, M.; Sudhahar, S.; Thirunavukkarasu, A.; Mohan Kumar, R.; Umarani, P. R.

    2013-08-01

    An organic compound Bis DL-Valine picrate (BDLVP) was synthesized successfully and single crystal was grown by slow evaporation solution growth method. The presence of functional groups in the compound was identified by FTIR spectral analysis. Single crystal X-ray diffraction study revealed that the grown crystal belongs to P21/n space group of monoclinic crystal system. Powder X-ray diffraction pattern was recorded to know the crystalline perfection of the grown crystal. The reaction mechanism, thermal decomposition stages and thermal stability of the grown crystal were studied by using TG/DTA analysis. From the UV-visible spectral study, the electronic band gap energy (Eg) of the grown crystal was found to be 2.43 eV. The second harmonic generation (SHG) efficiency of grown crystal was found to be 1.3 times higher than KDP crystal by using Kurtz powder SHG technique. The microhardness property of the grown crystal was examined by Vicker's microhardness test.

  3. Phase-field modeling on morphological landscape of isotactic polystyrene single crystals.

    Science.gov (United States)

    Xu, Haijun; Matkar, Rushikesh; Kyu, Thein

    2005-07-01

    Spatio-temporal growth of isotactic polystyrene single crystals during isothermal crystallization has been investigated theoretically based on the phase field model by solving temporal evolution of a nonconserved phase order parameter coupled with a heat conduction equation. In the description of the total free energy, an asymmetric double-well local free energy density has been adopted to represent the metastable melt and the stable solid crystal. Unlike the small molecule systems, polymer crystallization rarely reaches thermodynamic equilibrium; most polymer crystals are kinetically stabilized in some metastable states. To capture various metastable polymer crystals, the phase field crystal order parameter at the solidification potential has been treated to be supercooling dependent such that it can assume an intermediate value between zero (melt) and unity (perfect crystal), reflecting imperfect polycrystalline nature of polymer crystals. Two-dimensional simulations exhibit various single crystal morphologies of isotactic polystyrene crystals such as faceted hexagonal patterns transforming to nonfaceted snowflakes with increasing supercooling. Of particular interest is that heat liberation from the crystallizing front influences the curvature of the crystal-melt interface, leading to directional growth of lamellar tips and side branches. The landscape of these morphological textures has been established as a function of anisotropy of surface energy and supercooling. With increasing supercooling and decreasing anisotropy, the hexagonal single crystal transforms to the dense lamellar branching morphology in conformity with the experimental findings.

  4. Cryogenic Clamp-on Ultrasonic Flowmeters using Single Crystal Piezoelectric Transducers Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Clamp-on ultrasound cryogenic flowmeters using single crystal piezoelectric transducers are proposed to enable reliable, accurate cryogenic instrumentation needs in...

  5. Single-walled Carbon Nanotubes Regularly Aligned in Channels of Zeolite Single Crystal

    Institute of Scientific and Technical Information of China (English)

    Zi Kang Tang; Handong Sun; Jiannong Wang

    2000-01-01

    @@ We report the synthesis of single-wall carbon nanotubes (SWCNs) formed in 1-nm-sized channels of zeolite crystal by pyrolysis of tripropylamine molecules. The SWCNs are mono-sized and parallelly aligned along the crystal direction. In the present paper, we report the polarized Raman spectra measured for the wellaligned SWCNs, which gives us information about structural symmetry. Electrical transport properties of the SWNTs are measured in the temperature range of 0.3 K ~ 300 K. The conductivity of the SWCNs is monotonically decreased with decreasing temperature. The observed temperature dependence of zero-field conductance, In(σ) ~ 1/√T, could be explained well in terms of electron localization caused by imperfections and impurities in the nanotubes.

  6. Single crystal nuclear magnetic resonance in spinning powders

    Science.gov (United States)

    Pell, Andrew J.; Pintacuda, Guido; Emsley, Lyndon

    2011-10-01

    We present a method for selectively exciting nuclear magnetic resonances (NMRs) from well-defined subsets of crystallites from a powdered sample under magic angle spinning. Magic angle spinning induces a time dependence in the anisotropic interactions, which results in a time variation of the resonance frequencies which is different for different crystallite orientations. The proposed method exploits this by applying selective pulses, which we refer to as XS (for crystallite-selective) pulses, that follow the resonance frequencies of nuclear species within particular crystallites, resulting in the induced flip angle being orientation dependent. By selecting the radiofrequency field to deliver a 180 ○ pulse for the target orientation and employing a train of such pulses combined with cogwheel phase cycling, we obtain a high degree of orientational selectivity with the resulting spectrum containing only contributions from orientations close to the target. Typically, this leads to the selection of between 0.1% and 10% of the crystallites, and in extreme cases to the excitation of a single orientation resulting in single crystal spectra of spinning powders. Two formulations of this method are described and demonstrated with experimental examples on [1 - 13C]-alanine and the paramagnetic compound Sm2Sn2O7.

  7. Enhanced Catalysis Activity in a Coordinatively Unsaturated Cobalt-MOF Generated via Single-Crystal-to-Single-Crystal Dehydration.

    Science.gov (United States)

    Ren, Hai-Yun; Yao, Ru-Xin; Zhang, Xian-Ming

    2015-07-06

    Hydrothermal reaction of Co(NO3)2 and terphenyl-3,2",5",3'-tetracarboxyate (H4tpta) generated Co3(OH)2 chains based 3D coordination framework Co3(OH)2(tpta)(H2O)4 (1) that suffered from single-crystal-to-single-crystal dehydration by heating at 160 °C and was transformed into dehydrated Co3(OH)2(tpta) (1a). During the dehydration course, the local coordination environment of part of the Co atoms was transformed from saturated octahedron to coordinatively unsaturated tetrahedron. Heterogenous catalytic experiments on allylic oxidation of cyclohexene show that dehydrated 1a has 6 times enhanced catalytic activity than as-synthesized 1 by using tert-butyl hydroperoxide (t-BuOOH) as oxidant. The activation energy for the oxidation of cylcohexene with 1a catalyst was 67.3 kJ/mol, far below the value with 1 catalysts, which clearly suggested that coordinatively unsaturated Co(II) sites in 1a have played a significant role in decreasing the activation energy. It is interestingly found that heterogeneous catalytic oxidation of cyclohexene in 1a not only gives the higher conversion of 73.6% but also shows very high selectivity toward 2-cyclohexene-1-one (ca. 64.9%), as evidenced in high turnover numbers (ca. 161) based on the open Co(II) sites of 1a catalyst. Further experiments with a radical trap indicate a radical chain mechanism. This work demonstrates that creativity of coordinatively unsaturated metal sites in MOFs could significantly enhance heterogeneous catalytic activity and selectivity.

  8. On the Use of Wide-Angle Energy-Sensitive Detectors in White-Beam X-Ray Single-Crystal Diffraction

    DEFF Research Database (Denmark)

    Buras, B.; Staun Olsen, J.; Gerward, Leif

    1980-01-01

    The possible applications of multiple-element or large-area semiconductor detectors in single-crystal X-ray diffraction are discussed on the basis of experimental results using Bremsstrahlung as well as synchrotron radiation.......The possible applications of multiple-element or large-area semiconductor detectors in single-crystal X-ray diffraction are discussed on the basis of experimental results using Bremsstrahlung as well as synchrotron radiation....

  9. Analysis on the anisotropic electromechanical properties of lead magnoniobate titanate single crystal for ring type ultrasonic motors

    Directory of Open Access Journals (Sweden)

    Xiang Shi

    2016-11-01

    Full Text Available This work discussed the optimized cut of single crystal lead magnoniobate titanate (PMNT for use of ring type travelling wave ultrasonic motors (USMs, according to anisotropic analysis on electromechanical properties. The selection criterion of crystal orientation relies on the circular uniformity of the induced travelling wave amplitude on the stator surface. By calculating the equivalent elastic coefficient c11 and lateral piezoelectric constant d31, the optimal crystal orientations were proposed for PMNT single crystals poled along different directions. For single crystal poled along c directions, the optimal orientation lies along [001]c with d31=-1335pC/N and k31=0.87. The crystallographic orientation [025]c is the optimized orientation for single crystals poled along c direction with d31=199pC/N and k31=0.55. The optimal orientation of 1R configuration is [332¯]c with a large enhancement of d31 = 1201 and k31=0.92.

  10. Analysis on the anisotropic electromechanical properties of lead magnoniobate titanate single crystal for ring type ultrasonic motors

    Science.gov (United States)

    Shi, Xiang; Huang, Wenbin; Li, Fei; Li, Zhenrong; Xu, Zhuo; Jiang, Xiaoning; Wei, Xiaoyong

    2016-11-01

    This work discussed the optimized cut of single crystal lead magnoniobate titanate (PMNT) for use of ring type travelling wave ultrasonic motors (USMs), according to anisotropic analysis on electromechanical properties. The selection criterion of crystal orientation relies on the circular uniformity of the induced travelling wave amplitude on the stator surface. By calculating the equivalent elastic coefficient c11 and lateral piezoelectric constant d31, the optimal crystal orientations were proposed for PMNT single crystals poled along different directions. For single crystal poled along c directions, the optimal orientation lies along [001]c with d31=-1335pC/N and k31=0.87. The crystallographic orientation [025]c is the optimized orientation for single crystals poled along c direction with d31=199pC/N and k31=0.55. The optimal orientation of 1R configuration is [332 ¯ ] c with a large enhancement of d31 = 1201 and k31=0.92.

  11. Optical and magnetic properties of nitrogen ion implanted MgO single crystal

    Institute of Scientific and Technical Information of China (English)

    Liu Chun-Ming; Gu Hai-Quan; Xiang Xia; Zhang Yan; Jiang Yong; Chen Meng; Zu Xiao-Tao

    2011-01-01

    The microstructure, optical property and magnetism of nitrogen ion implanted single MgO crystals are studied.A parallel investigation is also performed in an iron ion implanted single MgO sample as a reference. Large structural,optical and magnetic differences are obtained between the nitrogen and iron implanted samples. Room temperature ferromagnetism with a fairly large coercivity field of 300 Oe (1 Oe=79.5775 A/m), a remanence of 38% and a slightly changed optical absorption is obtained in the sample implanted using nitrogen with a dose of 1×1018 ions/cm2. Transition metal contamination and defects induced magnetism can be excluded when compared with those of the iron ion implanted sample, and the nitrogen doping is considered to be the main origin of ferromagnetism.

  12. Single-mode hollow-core photonic crystal fiber made from soft glass

    Science.gov (United States)

    Jiang, X.; Euser, T. G.; Abdolvand, A.; Babic, F.; Tani, F.; Joly, N. Y.; Travers, J. C.; St. J. Russell, P.

    2011-08-01

    We demonstrate the first soft-glass hollow core photonic crystal fiber. The fiber is made from a high-index lead-silicate glass (Schott SF6, refractive index 1.82 at 500 nm). Fabricated by the stack-and-draw technique, the fiber incorporates a 7-cell hollow core embedded in a highly uniform 6-layer cladding structure that resembles a kagomé-like lattice. Effective single mode guidance of light is observed from 750 to 1050 nm in a large mode area (core diameter ~30 μm) with a low loss of 0.74 dB/m. The underlying guidance mechanism of the fiber is investigated using finite element modeling. The fiber is promising for applications requiring single mode guidance in a large mode area, such as particle guidance, fluid and gas filled devices.

  13. Fabrication of Single Crystal MgO Capsules

    Science.gov (United States)

    Danielson, Lisa

    2012-01-01

    A method has been developed for machining MgO crystal blocks into forms for containing metallic and silicate liquids at temperatures up to 2,400 C, and pressures up to at least 320 kilobars. Possible custom shapes include tubes, rods, insulators, capsules, and guides. Key differences in this innovative method include drilling along the crystallographic zone axes, use of a vibration minimizing material to secure the workpiece, and constant flushing of material swarf with a cooling medium/lubricant (water). A single crystal MgO block is cut into a section .5 mm thick, 1 cm on a side, using a low-speed saw with a 0.004 blade. The cut is made parallel to the direction of cleavage. The block may be cut to any thickness to achieve the desired length of the piece. To minimize drilling vibrations, the MgO block is mounted on a piece of adhesive putty in a vise. The putty wad cradles the bottom half of the entire block. Diamond coring tools are used to drill the MgO to the desired custom shape, with water used to wet and wash the surface of swarf. Compressed air may also be used to remove swarf during breaks in drilling. The MgO workpiece must be kept cool at all times with water. After all the swarf is rinsed off, the piece is left to dry overnight. If the workpiece is still attached to the base of the MgO block after drilling, it may be cut off by using a diamond cutoff wheel on a rotary hand tool or by using a low-speed saw.

  14. Single-crystal elastic constants of natural ettringite

    KAUST Repository

    Speziale, Sergio

    2008-07-01

    The single-crystal elastic constants of natural ettringite were determined by Brillouin spectroscopy at ambient conditions. The six non-zero elastic constants of this trigonal mineral are: C11 = 35.1 ± 0.1 GPa, C12 = 21.9 ±0.1 GPa, C13 = 20.0 ± 0.5 GPa, C14 = 0.6 ± 0.2 GPa, C33 = 55 ± 1 GPa, C44 = 11.0 ± 0.2 GPa. The Hill average of the aggregate bulk, shear modulus and the polycrystal Young\\'s modulus and Poisson\\'s ratio are 27.3 ± 0.9 GPa, 9.5 ± 0.8 GPa, 25 ± 2 GPa and 0.34 ± 0.02 respectively. The longitudinal and shear elastic anisotropy are C33/C11 = 0.64 ± 0.01 and C66/C44 =0.60 ± 0.01. The elastic anisotropy in ettringite is connected to its crystallographic structure. Stiff chains of [Al(OH)6]3- octahedra alternating with triplets of Ca2+ in eight-fold coordination run parallel to the c-axis leading to higher stiffness along this direction. The determination of the elastic stiffness tensor can help in the prediction of the early age properties of cement paste when ettringite crystals precipitate and in the modeling of both internal and external sulfate attack when secondary ettringite formation leads to expansion of concrete. © 2008 Elsevier Ltd. All rights reserved.

  15. Radiation-electromagnetic effect in germanium single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Kikoin, I.K.; Kikoin, L.I.; Lazarev, S.D.

    1980-10-01

    An experimental study was made of the radiation-electromagnetic effect in germanium single crystals when excess carriers were generated by bombardment with ..cap alpha.. particles, protons, or x rays in magnetic fields up to 8 kOe. The source of ..cap alpha.. particles and protons was a cyclotron and x rays were provided by a tube with a copper anode. The radiation-electromagnetic emf increased linearly on increase in the magnetic field and was directly proportional to the flux of charged particles at low values of the flux, reaching saturation at high values of the flux (approx.5 x 10/sup 11/ particles .cm/sup -2/ .sec/sup -1/). In the energy range 4--40 MeV the emf was practically independent of the ..cap alpha..-particle energy. The sign of the emf was reversed when samples with a ground front surface were irradiated. Measurements of the photoelectromagnetic and Hall effects in the ..cap alpha..-particle-irradiated samples showed that a p-n junction was produced by these particles and its presence should be allowed for in investigations of the radiation-electromagnetic effect. The measured even radiation-electromagnetic emf increased quadratically on increase in the magnetic field. An investigation was made of the barrier radiation-voltaic effect (when the emf was measured between the irradiated and unirradiated surfaces). Special masks were used to produce a set of consecutive p-n junctions in germanium crystals irradiated with ..cap alpha.. particles. A study of the photovoltaic and photoelectromagnetic effects in such samples showed that the method could be used to increase the efficiency of devices utilizing the photoelectromagnetic effect.

  16. Solution coating of large-area organic semiconductor thin films with aligned single-crystalline domains

    KAUST Repository

    Diao, Ying

    2013-06-02

    Solution coating of organic semiconductors offers great potential for achieving low-cost manufacturing of large-area and flexible electronics. However, the rapid coating speed needed for industrial-scale production poses challenges to the control of thin-film morphology. Here, we report an approach - termed fluid-enhanced crystal engineering (FLUENCE) - that allows for a high degree of morphological control of solution-printed thin films. We designed a micropillar-patterned printing blade to induce recirculation in the ink for enhancing crystal growth, and engineered the curvature of the ink meniscus to control crystal nucleation. Using FLUENCE, we demonstrate the fast coating and patterning of millimetre-wide, centimetre-long, highly aligned single-crystalline organic semiconductor thin films. In particular, we fabricated thin films of 6,13-bis(triisopropylsilylethynyl) pentacene having non-equilibrium single-crystalline domains and an unprecedented average and maximum mobilities of 8.1±1.2 cm2 V-1 s -1 and 11 cm2 V-1 s-1. FLUENCE of organic semiconductors with non-equilibrium single-crystalline domains may find use in the fabrication of high-performance, large-area printed electronics. © 2013 Macmillan Publishers Limited. All rights reserved.

  17. Solution coating of large-area organic semiconductor thin films with aligned single-crystalline domains.

    Science.gov (United States)

    Diao, Ying; Tee, Benjamin C-K; Giri, Gaurav; Xu, Jie; Kim, Do Hwan; Becerril, Hector A; Stoltenberg, Randall M; Lee, Tae Hoon; Xue, Gi; Mannsfeld, Stefan C B; Bao, Zhenan

    2013-07-01

    Solution coating of organic semiconductors offers great potential for achieving low-cost manufacturing of large-area and flexible electronics. However, the rapid coating speed needed for industrial-scale production poses challenges to the control of thin-film morphology. Here, we report an approach--termed fluid-enhanced crystal engineering (FLUENCE)--that allows for a high degree of morphological control of solution-printed thin films. We designed a micropillar-patterned printing blade to induce recirculation in the ink for enhancing crystal growth, and engineered the curvature of the ink meniscus to control crystal nucleation. Using FLUENCE, we demonstrate the fast coating and patterning of millimetre-wide, centimetre-long, highly aligned single-crystalline organic semiconductor thin films. In particular, we fabricated thin films of 6,13-bis(triisopropylsilylethynyl) pentacene having non-equilibrium single-crystalline domains and an unprecedented average and maximum mobilities of 8.1±1.2 cm(2) V(-1) s(-1) and 11 cm(2) V(-1) s(-1). FLUENCE of organic semiconductors with non-equilibrium single-crystalline domains may find use in the fabrication of high-performance, large-area printed electronics.

  18. Solution coating of large-area organic semiconductor thin films with aligned single-crystalline domains

    Science.gov (United States)

    Diao, Ying; Tee, Benjamin C.-K.; Giri, Gaurav; Xu, Jie; Kim, Do Hwan; Becerril, Hector A.; Stoltenberg, Randall M.; Lee, Tae Hoon; Xue, Gi; Mannsfeld, Stefan C. B.; Bao, Zhenan

    2013-07-01

    Solution coating of organic semiconductors offers great potential for achieving low-cost manufacturing of large-area and flexible electronics. However, the rapid coating speed needed for industrial-scale production poses challenges to the control of thin-film morphology. Here, we report an approach—termed fluid-enhanced crystal engineering (FLUENCE)—that allows for a high degree of morphological control of solution-printed thin films. We designed a micropillar-patterned printing blade to induce recirculation in the ink for enhancing crystal growth, and engineered the curvature of the ink meniscus to control crystal nucleation. Using FLUENCE, we demonstrate the fast coating and patterning of millimetre-wide, centimetre-long, highly aligned single-crystalline organic semiconductor thin films. In particular, we fabricated thin films of 6,13-bis(triisopropylsilylethynyl) pentacene having non-equilibrium single-crystalline domains and an unprecedented average and maximum mobilities of 8.1±1.2 cm2 V-1 s-1 and 11 cm2 V-1 s-1. FLUENCE of organic semiconductors with non-equilibrium single-crystalline domains may find use in the fabrication of high-performance, large-area printed electronics.

  19. Controlled vapor phase growth of single crystalline, two-dimensional GaSe crystals with high photoresponse.

    Science.gov (United States)

    Li, Xufan; Lin, Ming-Wei; Puretzky, Alexander A; Idrobo, Juan C; Ma, Cheng; Chi, Miaofang; Yoon, Mina; Rouleau, Christopher M; Kravchenko, Ivan I; Geohegan, David B; Xiao, Kai

    2014-06-30

    Compared with their bulk counterparts, atomically thin two-dimensional (2D) crystals exhibit new physical properties, and have the potential to enable next-generation electronic and optoelectronic devices. However, controlled synthesis of large uniform monolayer and multi-layer 2D crystals is still challenging. Here, we report the controlled synthesis of 2D GaSe crystals on SiO2/Si substrates using a vapor phase deposition method. For the first time, uniform, large (up to ~60 μm in lateral size), single-crystalline, triangular monolayer GaSe crystals were obtained and their structure and orientation were characterized from atomic scale to micrometer scale. The size, density, shape, thickness, and uniformity of the 2D GaSe crystals were shown to be controllable by growth duration, growth region, growth temperature, and argon carrier gas flow rate. The theoretical modeling of the electronic structure and Raman spectroscopy demonstrate a direct-to-indirect bandgap transition and progressive confinement-induced bandgap shifts for 2D GaSe crystals. The 2D GaSe crystals show p-type semiconductor characteristics and high photoresponsivity (~1.7 A/W under white light illumination) comparable to exfoliated GaSe nanosheets. These 2D GaSe crystals are potentially useful for next-generation electronic and optoelectronic devices such as photodetectors and field-effect transistors.

  20. Thermal behaviour of strontium tartrate single crystals grown in gel

    Indian Academy of Sciences (India)

    M H Rahimkutty; K Rajendra Babu; K Sreedharan Pillai; M R Sudarsana Kumar; C M K Nair

    2001-04-01

    Thermal behaviour of strontium tartrate crystals grown with the aid of sodium metasilicate gel is investigated using thermogravimetry (TG) and differential thermal analysis (DTA). Effect of magnetic field and dopant (Pb)2+ on the crystal stability is also studied using thermal analysis. This study reveals that water molecules are locked up in the lattice with different strengths in the grown crystals.