WorldWideScience

Sample records for large industrial enterprises

  1. Reactive power compensation and loss reduction in large industrial enterprises

    Energy Technology Data Exchange (ETDEWEB)

    Jovanovic, S; Gajic, B; Mijailovic, S [Institute Nikola Tesla, Beograd (Yugoslavia)

    1991-12-01

    This paper considers the reactive power compensation and the active power and energy loss reduction of large radial power networks in the Serbian mine and smelting industry. It gives an efficient optimization procedure for positioning and sizing capacitors in large industrial systems integrated with a simple network analysis method. (Author).

  2. RESTRUCTURING OF INDUSTRIAL ENTERPRISE

    Directory of Open Access Journals (Sweden)

    L. I. Podderegina

    2009-01-01

    Full Text Available The paper presents main principles for execution of current and strategic restructuring of national enterprises while using experience of countries with developed market economy. The principles contribute to higher efficiency in internal industrial relations at national industrial enterprises.

  3. Contemporary problems of health protection for workers employed at a large industrial enterprise and working under occupational hazards

    Directory of Open Access Journals (Sweden)

    E.Ya. Titova

    2017-12-01

    Full Text Available We examined data provided by a healthcare facility at a large industrial enterprise focusing on occupational morbidity dynamics over 2013-2016 and periodical medical examinations results obtained in 2015 and 2016. We created a specialized program and applied it to conduct sociological research on health of workers who has a periodical medical examination. We detected that most questioned workers (50.48 % whose occupations were associated with dangerous and hazardous occupa-tional factors were poorly aware of occupational diseases prevention and needed relevant knowledge. It is shown that over 2013–2016 occupational morbidity decreased from 9.38 cases per 10,000 workers to 3.55 cases. However, it remained higher that in Russian and Perm region on average. All occupational diseases were detected in workers older than 40 with their working record being longer than 15 years. A share of people able to work with certain limitations grew in 2016 in comparison with 2015 (from 7.35 to 9.31 %; a number of people who needed sanatorium-resort therapy also grew from 19.96 to 32.12 %; a number of people with general somatic diseases increased from 31.23 to 70.17 %; health index reduced from 38.77 to 29.82 %. Musculoskeletal system diseases, con-nective tissue diseases, circulatory system diseases, eye and its accessory apparatus diseases, respiratory organs diseases, and digestive organs diseases prevailed in general somatic morbidity structure. We registered a substantial growth in hearing organs diseases (mostly hearing loss, from 49.47 to 99.06 cases per 100 examined; skin and subcutaneous tissue diseases (from 7.73 to 36.3 cases per 100 examined; urinary system diseases (from 68.42 to 100.62 cases per 100 examined. We detected that most examined workers pursued unhealthy lifestyle. For example, 29.9 % often consumed strong spirits (equally men and women, and 72.8 % smoked. All the respondents tended to have low physical activity. We also revealed some

  4. Safety practices in Jordanian manufacturing enterprises within industrial estates.

    Science.gov (United States)

    Khrais, Samir; Al-Araidah, Omar; Aweisi, Assaf Mohammad; Elias, Fadia; Al-Ayyoub, Enas

    2013-01-01

    This paper investigates occupational health and safety practices in manufacturing enterprises within Jordanian industrial estates. Response rates were 21.9%, 58.6% and 70.8% for small, medium and large sized enterprises, respectively. Survey results show that most companies comply with state regulations, provide necessary facilities to enhance safety and provide several measures to limit and control hazards. On the negative side, little attention is given to safety training that might be due to the lack of related regulations and follow-up, financial limitations or lack of awareness on the importance of safety training. In addition, results show that ergonomic hazards, noise and hazardous chemicals are largely present. Accident statistics show that medium enterprises have the highest accident cases per enterprise, and chemical industries reported highest total number of accidents per enterprise. The outcomes of this study establish a base for appropriate safety recommendations to enhance the awareness and commitment of companies to appropriate safety rules.

  5. Modernization of industrial enterprises and innovative implementation

    OpenAIRE

    У.M. Petrovych; V.Z. Borbulevych

    2016-01-01

    The aim of the article. The main objective of the domestic company is the development of new market mechanisms, the implementation of progressive reforms, formation of specialized structures supporting innovation-oriented management. The purpose of this paper is to develop a comprehensive approach to the principles of industrial enterprises modernization. Based on the goal, the main objectives of the study are: to identify the main objectives of modernization of industrial enterprises; to dev...

  6. SOURCES OF FINANCING INDUSTRIAL COMPLEX ENTERPRISES

    Directory of Open Access Journals (Sweden)

    Anzhela Zakhitovna Namitulina

    2016-01-01

    Full Text Available Subject article is relevant because It is devoted to description of sources of financing of defense enterprises and peculiarities of selection of sources of financing enterprises of the military-industrial complex. In the first part of the article provides an overview of the financial resources and types of funding organizations and enterprises. Description of modern methods of creating a climate for innovation, supporting innovative ideas, and domestic entrepreneurship. The second part of the article describes the direction, the form of financing for companies, taking into account the peculiarities of the development and operation of defense enterprises. The first phase of the study was to identify the main sources of financing for companies in difficult socio-economic conditions of the potential customer of defense products. The second phase of the study was to determine the ranking factors the use of different sources of funding and its impact on the development of enterprises. The presented research topic is particularly relevant in connection with an increase in the role of sources of financing development of the industry for the growth of innovation activity of enterprises. The urgency of acquiring those aspects of economic relations that with the financing of new projects enterprises of the defense-industrial complex, the financing of the state defense order. In today's economic environment has the need to address financial security of the defense-industrial complex, to attract new sources of funding, development of bank lending in the defense sector and the participation of banks in the financing of projects of the enterprises of the military-industrial complex. The processes of market transformation of enterprises of the military-industrial complex (MIC have acquired a special significance in relation to defining the role of these enterprises in the country and providing security to the complexity of their adaptation to market

  7. Industrial Cloud: Toward Inter-enterprise Integration

    Science.gov (United States)

    Wlodarczyk, Tomasz Wiktor; Rong, Chunming; Thorsen, Kari Anne Haaland

    Industrial cloud is introduced as a new inter-enterprise integration concept in cloud computing. The characteristics of an industrial cloud are given by its definition and architecture and compared with other general cloud concepts. The concept is then demonstrated by a practical use case, based on Integrated Operations (IO) in the Norwegian Continental Shelf (NCS), showing how industrial digital information integration platform gives competitive advantage to the companies involved. Further research and development challenges are also discussed.

  8. Areas of improvement of tax adjustment of industrial enterprises

    Directory of Open Access Journals (Sweden)

    Abramova Olha

    2016-03-01

    Full Text Available This article summarizes the scientific approaches and practical experience in theoretical and institutional framework of fiscal management industry. The basic problems in the fiscal management system, the tax regulation methods of large taxpayers are shown. Opportunity is grounded to stimulate the enterprises activity in the directions of tax rates differentiation, tax exemptions and tax credit.

  9. Social Responsibility of Hospitality Industry Enterprises

    Directory of Open Access Journals (Sweden)

    Nuray Türker

    2013-09-01

    Full Text Available The main aim of this study is to determine the views of employees and managers working at the hospitality industry in Safranbolu towards the social responsibility of tourism enterprises, social responsibility activities carried out by the hotel enterprises, and their views on the advantages and contributions of social responsibility projects to the hotel business. This study will make contributions to the related literature on social responsibility at the hospitality industry by means of identifying the social responsibility activities of hotel enterprises, of which there is relatively limited number of studies.Within this context, a structured survey was conducted with 152 respondents including employees, managers and owners of the hotel enterprises through face to face interviews in order to determine the perceptions of employees towards social responsibility. SPSS 15 for Windows was used to analyze the data. The research has found that the employees working at hospitality industry in Safranbolu are sensitive to the social responsibilities and they act socially responsible in their activities. Additionally the results show that the respondents behave socially responsible towards guests, society and natural environment, but that they are less responsible towards the suppliers.

  10. ANALYSIS OF COMPETITION INDUSTRIAL ENTERPRISES

    Directory of Open Access Journals (Sweden)

    A. O. Egorova

    2014-01-01

    Full Text Available The paper analyzed and systematized the definition of "competition" proposed by domestic and foreign scholars in the field of strategic management, based on these discovered and refined essence of the concept of "competition". We consider the price and non-price competition. Examples are given of the methods of competition used in the practice of industrial activities. Substantiated that the forms and methods of competition must be constantly improved through the search for new competitive advantages.

  11. Enterprise Value Generators in the Building Industry

    Directory of Open Access Journals (Sweden)

    Vochozka Marek

    2017-01-01

    Full Text Available Value generators mark factors that influence the given enterprise´s success most. Thus, they refer to activities and abilities that increase profitability, decrease risk, and support the company´s growth. The aim of this contribution is to identify value generators in a building enterprise. The main presumption, however, is that the enterprise value will be measured by the EVA Equity indicator (Economic Value Added for the shareholders – owners. Data to be analysed come from the Albertina database. They include complete financial statements of building enterprises that operated on the market between 2006 and 2015. The data is organized into a table the EVA Equity in each enterprise is calculated per each year of its operation on the market. The table is subsequently imported into the Statistica software which searches for the extent to which the EVA Equity indicator is dependent on the individual items of financial statements. The result is a created adequate methodology and identification of value generators in building industries from 2006 to 2015 in the Czech Republic. The following variables are marked as the most significant: economic growth per current accounting period, equity, bank loans and bailouts, trade receivables, and current assets.

  12. Methodology for evaluation of economic security of industrial enterprises

    OpenAIRE

    Kopytko Marta Ivanovna

    2014-01-01

    This paper investigates the features of evaluation of ensuring economic security of industrial enterprises and the algorithm of complex evaluation of the economic security of industrial enterprises over time and the system of criteria and their limit values ​​and the dynamics of change to determine the level of economic security industrial enterprise in terms of its components.

  13. Diagnostics of Procurement Activity of Industrial Enterprise

    OpenAIRE

    Veretennikova Anna B.

    2012-01-01

    The importance of procurement activity of industrial enterprise is substantiated in the article. The results of the critical analysis of the existing approaches to procurement effectiveness evaluating are presented. The main directions of diagnostics of procurement activity of industrial enterprise such as the quality of the organization and the resources, the effectiveness and efficiency, security of logistics operations.В статье обоснована актуальность диагностирования закупочной деятельнос...

  14. Tools of integration of innovation-oriented machine-building enterprises in industrial park environment

    Directory of Open Access Journals (Sweden)

    К.О. Boiarynova

    2017-08-01

    Full Text Available The research is devoted to the development of the tools for the integration of innovation-oriented mechanical engineering enterprises into the environment of industrial park as functional economic systems, which are capable on the own development basis to provide the development of resident enterprises. The article analyzes the opportunities for the development of mechanical engineering enterprises. The formed structure of the mechanism of integration of mechanical engineering enterprises as functional economic systems into the industrial park environment is based on: 1 the development of participation programs in the industrial park of the mechanical engineering enterprises as an innovation-oriented partner, which foresees the development of the enterprise immediately and the development of other residents; 2 the provision of high-tech equipment of resident enterprises of industrial parks; 3 the creation of subsidiary-spin-out enterprises of large mechanical engineering enterprises for high-tech production in the industrial park. The author proposes the road map that reveals the procedures for the integration and functioning the investigated enterprises through interaction as well as in the ecosystem of the industrial park and in the general ecosystem of functioning, and the tools for providing economic functionality through economic and organizational proceedings at preventive, partner and resident phases of integration. The tools allow the innovation-oriented mechanical engineering enterprises to integrate into such territorial structures as industrial parks, this in complex will allow carrying out their purposes in the development of the real sector of the economy.

  15. An integration strategy for large enterprises

    Directory of Open Access Journals (Sweden)

    Risimić Dejan

    2007-01-01

    Full Text Available Integration is the process of enabling a communication between disparate software components. Integration has been the burning issue for large enterprises in the last twenty years, due to the fact that 70% of the development and deployment budget is spent on integrating complex and heterogeneous back-end and front-end IT systems. The need to integrate existing applications is to support newer, faster, more accurate business processes and to provide meaningful, consistent management information. Historically, integration started with the introduction of point-to-point approaches evolving into simpler hub-and spoke topologies. These topologies were combined with custom remote procedure calls, distributed object technologies and message-oriented middleware (MOM, continued with enterprise application integration (EAI and used an application server as a primary vehicle for integration. The current phase of the evolution is service-oriented architecture (SOA combined with an enterprise service bus (ESB. Technical aspects of the comparison between the aforementioned technologies are analyzed and presented. The result of the study is the recommended integration strategy for large enterprises.

  16. THE FINANCIAL LIQUIDITY OF THE FOOD INDUSTRY ENTERPRISES IN POLAND IN THE SYSTEM SIZE OF ENTERPRISES

    Directory of Open Access Journals (Sweden)

    Anna Bieniasz

    2013-12-01

    Full Text Available The article presents the diversification of financial liquidity of food industry enterprises in Poland in 2009-2011 and indicates the main factors shaping liquidity. The study used unpublished data of Central Statistical Office, allowing for the analysis of liquidity in the system classes the food industry and the system enterprise size (small, medium, large. The analyses show, that the food industry in Poland in 2009-2011, regardless of their size and adopted ratios, have the ability to regulate the current liabilities, but kept at a low level. Analysis of the factors influencing liquidity showed, that the primary importance was turnover ratio of current liabilities, as well as ratio of financing of income through equity.

  17. Design of large-scale enterprise interoperable value webs

    NARCIS (Netherlands)

    Hofman, W.J.

    2011-01-01

    Still a lot of enterprises are faced with the issue of interoperability. Whereas large enterprises are able to implement the required technology, SMEs (Small and Medium sized Enterprises) face challenges as they lack knowledge and budget. Enterprises have defined their specific semantics and

  18. Cash flow optimization in industrial enterprise

    Directory of Open Access Journals (Sweden)

    Myznikova T.N.

    2017-01-01

    Full Text Available Optimization of cash flows of the industrial company provides economic entity necessity and sufficiency of financial resources for sustainable activities. Cash optimization techniques are grouped into two blocks: theoretical - is mainly foreign methods and applied techniques that are mostly used by Russian authors. Models described in the literature are not allowed for the particular industry in the formation of cash. The mathematical models described in the literature do not allow to take into account industry characteristics in the formation of funds. The proposed methodology by authors allows to predict cash amounts based on business company. The balance of cash flows is provided by the budgeting system. The company’s the released money can send funds for investment purposes. Effectiveness of confirmed by practical testing methodology on the existing machine-building enterprise.

  19. Analysis of the State of Operation Management at Industrial Enterprises

    OpenAIRE

    Zakharov Vladimir A.; Ivanova Valentina I.

    2013-01-01

    The article analyses operation management at industrial enterprises of the Kharkiv region, identifies main problems and offers ways of improvement of the quality of operation management at industrial enterprises of Ukraine. It marks out the factors of the competitive environment of the operation system, which exert significant influence on operation management of an industrial enterprise. It builds a diagram of problems and a tree of goals of elimination of problems of operation management.Пр...

  20. INDUSTRIAL ENTERPRISE TAX PLANNING AS PART OF EXPENSE OPTIMIZATION STRATEGY

    Directory of Open Access Journals (Sweden)

    A. P. Garnov

    2012-01-01

    Full Text Available Tax liability planning is vital for industrial enterprises to reduce their tax burden and thus reduce expenses of the organization for a certain period. Industrial enterprises are among main taxpayers in the Russian Federation, and recommendations given in the article on topical issues related to planning of tax obligations will help top managers of the enterprises to avoid unnecessary financial losses and to ensure further growth and development of their organizations. Attention is focused on specifics of the industrial enterprises’ activities under present conditions due to the nature and particular features of their operation.

  1. INDUSTRIAL ENTERPRISE TAX PLANNING AS PART OF EXPENSE OPTIMIZATION STRATEGY

    Directory of Open Access Journals (Sweden)

    A. P. Garnov

    2012-01-01

    Full Text Available Tax liability planning is vital for industrial enterprises to reduce their tax burden and thus reduce expenses of the organization for a certain period. Industrial enterprises are among main taxpayers in the Russian Federation, and recommendations given in the article on topical issues relatedto planning of tax obligations will help top managers of the enterprises to avoid unnecessary financial losses and to ensure further growth and development of their organizations. Attention is focused on specifics of the industrial enterprises’ activities under present conditions due to thenature and particular features of their operation.

  2. Management of logistics chains of industrial enterprises in high-tech industries

    Directory of Open Access Journals (Sweden)

    Demchenko Alexander

    2017-01-01

    Full Text Available The article analyses the trends of high-tech industries development in the market globalization conditions. The economic growth of high-tech industries largely depends on technological innovations, products and equipment based on usage of the results of applied and fundamental scientific researches. It is shown that characteristics of high-tech productions influence the logistics chain structure. It justifies the importance to include partnering enterprises taking part in creation of intellectual and tangible assets in the logistic chain of the industrial enterprise. It is noted that development of production technologies contributes to formation of innovative logistic chains, which participants are enterprises cooperating for achievement of competitive power. The article offers a model of an industry logistic chain comprising the conventional logistic chain and innovative logistic chains corresponding to the industry market segments. It is proposed to use the customer value of the manufactured products as a criterion of the industrial enterprise’s logistic chains management efficiency. Implementation of the offered model of cooperation between the logistic chain participants is aimed at creation of a continuous innovations flow, reduction of technological development costs and uniting of the participants’ experience.

  3. Optimizing the structure of financial resources of industrial enterprises in the market economy mechanism

    Directory of Open Access Journals (Sweden)

    A. Vlasov

    2015-01-01

    Full Text Available The article deals with the optimization of the structure of financial resources of industrial enterprises in the market economy mechanism. The slowdown of the Russian economy force companies to promote more accurate system financial planning its activities. In modern economic conditions the company's performance is largely dependent on the ability of management to more accurately predict financial flows, as well as more accurately predict the financial and human resources to ensure solvency of the enterprise, thus more competent to form the strategy of development of the organization.Goal / task. The aim of the article the search for the optimal structure of financial resources of industrial enterprises in the market economy mechanism and to develop proposals for the sustainable development of the enterprise. The task of this article is to investigate the structure of financial resources of the enterprise, in a deteriorating economic situation that must be considered in the sustainable development of industrial enterprises.Methodology. In conducting this study the main sources of the original data were the materials of the state statistics, the works of famous economists. The basis of the methodological developments based on comparative methods of analysis.Results. Given the concept of optimizing the structure of financial resources of the industrial enterprises. It shows the influence of external and internal factors affecting the stability of the industrial enterprises. Highlighted the impact of the economic situation on the role of these factors.Conclusions / significance. In the current economic conditions of the state and the new economic realities, it is necessary to focus to industrial enterprises to conduct an effective economic policy, thereby improving the financial stability of the enterprise.

  4. The analysis of pricing principles at domestic industrial enterprises

    OpenAIRE

    I.M. Rjabchenko; V.V. Bozhkova

    2013-01-01

    The analysis of pricing principles at domestic industrial enterprisesTheoretical and methodological aspects of marketing pricing formation are investigated in the article. The aim of this research is systematization of marketing pricing principles and formation of corresponding offers concerning perfection of a domestic industrial enterprises pricing policy.The results of the analysis. The authors note that pricing principles are important element of pricing methodology which form basic posit...

  5. IMPROVEMENT OF STRATEGIC MANAGEMENT OF THE INDUSTRIAL ENTERPRISE

    Directory of Open Access Journals (Sweden)

    Anna E. Gorokhova

    2015-01-01

    Full Text Available The subject / topic: The subject of this article is very actual in the light of formation of post-industrial economy and need of improvement of methods, tools and mechanisms of management of economic subjects. The main reason for low efficiency of the industrial enterprises consists now that the developed stereotypes of managing and the applied methods of management don't conform to requirements of market economy. In article advantages of introduction of instruments of strategic management in activity of the industrial enterprises are considered.The purpose / objectives: The purpose of article is the analysis of the directions of improvement of strategic management of the industrial enterprise in modern economic conditions. Objectives of the article: To investigate differences of strategic management of the industrial enterprise from traditional, to analyse modern strategy of the industrial enterprises, to reveal their features and scopes.Methodology: A methodical basis of this article are comparative methods of the analysis.The Results: Difference of strategic management of the industrial enterprise from the traditional is investigated. Possibility of strategic development of the industrial companies only at systematic introduction of innovations is proved. Modern strategy of development of the industrial enterprises are analysed: modern strategy of development in retail networks of sales of mobile phones, outsourcing strategy, strategy of development of the company on the basis of a matrix «a growth / share of the market», strategy of fight for intellectual leadership, strategy of ecosystems of J. F. Moore; their features and scopes are revealed.Conclusions / significance: It is necessary to expand practical use of instruments of strategic management in activity of the industrial enterprises as they allow to increase management efficiency as a result of the accounting of opportunities and threats of environment and current state of the

  6. THE INDUSTRIAL ENGINEER AS ENTERPRISE DESIGNER

    Directory of Open Access Journals (Sweden)

    Johan Rottier

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: A method is proposed by which the suitabilityof development capabilitiescan be evaluated for Enterprise design. The method is based on a model for development and models for various aspects of Enterprises. The evaluation approach is based on correlating the methodology, tools and techniques and knowledge base ofthe capabilitywith that required for the engineering of Enterprises.

    AFRIKAANSE OPSOMMING:'n Metode word voorgestel om ontwikkelingsvermoe-ns se geskiktheid vir die ontwerp van ondememings te evalueer. Die metode is enersyds gebaseer op 'n model vir ontwikkeling en andersyds op modelle wat die ontwikkelingsvereistes tov Ondememingstoelig. Die evaluasie geskied deur die metodologie, kennisbasisen ontwikkelings hulpmiddelsvan die vermoe te vergelyk met die vereistes wat die ontwikkeling van 'n Ondememing stel.

  7. Differences of Organizational Culture between Small and Large Enterprises

    Directory of Open Access Journals (Sweden)

    Ovidiu-Iliuta Dobre

    2016-01-01

    Full Text Available This research paper analyses the organizational culture of small enterprises and largeenterprises, and highlights the common elements and the main differences. The results of the studyshow significant differences in terms of organizational culture between the two types oforganizations. Employees working in small size enterprises are oriented towards innovation,whereas the ones working in large enterprises are more aware of social responsibility. In addition,small organizations are perceived to have a more supportive organizational culture than largeenterprises. Furthermore, the study reveals differences in management and leadership styles whenanalyzing the small and large enterprises. Considering the flatter organizational structure of smallenterprises, the managers have a personal relationship with the employees and they motivate thembetter and align their goals with the ones of the enterprise. In large organizations, the managersneed to have a tighter control, as more procedures have to be followed.

  8. Main directions of providing of industrial enterprises effective development and conditions of their choice

    Directory of Open Access Journals (Sweden)

    Y. V. Zhuravlev

    2016-01-01

    Full Text Available Difficulties in managing the effective development of an industrial enterprise is largely due to the lack of complex tools to measure it, which is aggravated by the lack of identification of the factors that affect the food industry enterprises. In the article, we investigated directions of providing of industrial enterprises effective development and determined conditions of their choice depending on organizational assets and enterprise’s added value dynamics. For every possible combination, we offered certain mechanism of effective development: internal – by means of enterprise’s self-potential activation, and external – by means of deep, moderate or shallow integration. Deep integration means full merger of the enterprise and is recommended in case of critical level of enterprise’s potential. Moderate integration is implemented by purchase of controlling block of shares and is carried out in case of critical or high enterprise’s potential combined with growth of added value. Shallow integration can be used in any combination of resources and added value and is implemented on a contractual basis without institutional and legal change. The concept of directions of providing of industrial enterprises development, that we worked out, is of applicable character and can be used by industrial enterprises regardless field and specific character of industry. Implementation of offered measures will provide industrial enterprises effective development, which will help to form organizational assets base of Russian economics, which is a powerful driver of modernization of Russian industrial enterprises and economics as a whole.

  9. INDUSTRIAL ENTERPRISE MANAGEMENT SYSTEM QUALITY ASSESMENT

    Directory of Open Access Journals (Sweden)

    S. V. Pankov

    2012-01-01

    Full Text Available Management systems of small-scale enterprises in Moscow region are of centralized linear type. Misunderstanding of the need for qualitymanagement operational processes is observed in such business structures. Using correct management systems results in reduction of business costs and increase of business economic efficiency and entrepreneurship social role.

  10. SUSTAINABLE DEVELOPMENT OF INDUSTRIAL ENTERPRISES IN CONDITIONS OF ECONOMIC INSTABILITY

    Directory of Open Access Journals (Sweden)

    M. Ya. Veselovsky

    2015-01-01

    Full Text Available In article the perspective of a sustainable development of the industrial enterprises is investigated, the factors infl uencing stability of development of the enterprises are analyzed, defi nition of different types of economic stability in the period of economic instability is given, internal and external factors of stability of the enterprises are allocated, is underlined that economic stability, first of all, is distinguished from the major factors infl uencing stability of development of the industrial enterprises. At the same time, authors consider factors of the available instability and their infl uence on rates of development of the industrial enterprises. Change of the current situation requires weakening of a number of the factors resulting in economic instability.Purposes. The purpose of article is the analysis of factors of the industrial enterprises infl uencing a sustainable development in the conditions of economic instability and development of the off ers providing on their sustainable development. Article tasks: to investigate and allocate factors, in the conditions of the worsening economic situation which are expedient for considering at a solution of the problem of a sustainable development of the industrial enterprises.Methodology. When carrying out the real research materials of the state statistics were the main sources of basic data. Comparative methods of the analysis are the basis for methodical development.Results. The concept is given and types of economic stability of the industrial enterprises are given. Infl uence of internal and external factors of the enterprises infl uencing stability is shown. Infl uence of an economic situation on a role of these factors is allocated. For achievement of a sustainable development of the industrial enterprises it is off ered to realize measures for weakening of the factors resulting in economic instability.Conclusions / importance. In the conditions of new economic

  11. Environmental management in Slovenian industrial enterprises - Empirical study

    Directory of Open Access Journals (Sweden)

    Vesna Čančer

    2002-01-01

    Full Text Available timulated with the firm belief that environmental management helps enterprises to achieve business success, expressed by a majority of managers in the sample enterprises, we present the results of an empirical study in the Slovene processing industry. The purpose of our research work is to identify, analyse and present the importance of the environment in business decision-making, the role of environmental management in strategic decision-making and its distribution across the business functions; environmental performance in business processes; the use of the methods for environmentally oriented business decision-making and the developmental tendencies of environmental management in Slovene enterprises of the processing industry. We define the key drivers of environmental management and their effect on the environmental behaviour of these enterprises. We present and interpret data indicating that environmental management is caused not only by compliance and regulation, but also by competition and enterprises’ own initiative.

  12. THE FORMATION OF A CAPITAL INVESTMENT PROJECT INDUSTRIAL ENTERPRISES

    Directory of Open Access Journals (Sweden)

    Y. S. Potashnik

    2015-01-01

    Full Text Available The article specifies the main sources of financing of investment projects of industrial enterprises, among which are proposed to distinguish between belonging to the participants (shareholders of the company and others. Shows the sequence and content of the steps in building the industrial enterprises of a specific capital investment project. The main requirements for the capital structure of the investment project. As such invited to consider the requirements for the financial feasibility of the project, minimize the cost of capital of the project, the need for additional investments and changes of property shares members of the company, and not exceeding the maximum level of the probability of occurrence of insolvency of the enterprise. The approach allowing to assess the adequacy of the probability of occurrence of insolvency of the enterprise in one way or another the capital structure of the project the maximum allowable (limit level. The methodical examples of basic calculations.

  13. METHODICAL APPROACHES TO THE COST MANAGEMENT OF INDUSTRIAL ENTERPRISES

    Directory of Open Access Journals (Sweden)

    Trunina Iryna

    2018-03-01

    Full Text Available Introduction. The paper deals with the actual issues of managing the costs of industrial enterprises, because in the conditions of an unstable market environment the financial performance depends on the efficiency of the cost management system, competitiveness, financial sustainability and investment attractiveness of any subject of economic activity. Purpose of the article is analys is of approaches to cost management, theoretical substantiation and development of recommendations regarding the formation of strategic cost management. Results. The economic content of cost management in the treatment of different authors and on different approaches: functional, process-oriented and system approaches has been considered. Their essence and features, the direction for operational or strategic management of expenses of the enterprise, ways of spending management in different approaches are determined. It is stated that all considered approaches to cost management of enterprises are aimed at optimal use of resources and ensuring the growth of the efficiency of enterprises. Conclusions. Based on the review of methodological approaches to cost management, recommendations are developed for expanding the implementation of cost management at various levels of enterprise management and the formation of strategic cost management within the framework of strategic management of an enterprise. The strategic cost management is complex category aimed at achieving a rational level of costs in the long run, which allows for the consideration of competitive cost advantages and increase the competitiveness of an industrial enterprise. The implementation of cost reduction strategies should be a constant and important part of the company’s work, while the strategy of cost reduction should be integrated into the overall business strategy of the enterprise.

  14. Analysis of costs structure of the industrial enterprise

    Directory of Open Access Journals (Sweden)

    Yuriy V. Kovtunenko

    2014-12-01

    Full Text Available Costs are an important factor that affects the economic activities of an industrial enterprise, because they affect the profits of the enterprise on production efficiency and competitiveness. The article aims to summarize approaches of the definition of “costs”, classification costs of the enterprise according to different characteristics and cost structure of industrial enterprises. Each scientist has his own opinion on the choice of the structure and classification of costs, which is based on his own experience and experience of other scientists. Economically justified classification of costs is an important factor for analysis and costs accounting. This paper examines the concept of “costs” in the interpretation of various authors based on research of scientists that highlight the main features of the classification of costs, give the cost structure of industrial enterprises. Based on the study it can be concluded that the standard classification of costs is not for all companies. Therefore, it is necessary to develop a classification of costs according to the main features of the company.

  15. EFFECTIVE MANAGEMENT CONCEPT OF POWER CONSUMPTION OF INDUSTRIAL ENTERPRISE

    Directory of Open Access Journals (Sweden)

    Vladimir A. Koksharov

    2014-01-01

    Full Text Available The article distinguishes the methodological and systematic fundamentals for the formation of energy policy of the industrial enterprise. The article performes the analysis of Russian state policy in the field of energy efficiency and conservation , which allows to identify the organizational-economic and regulatory drawbacks proving the existing contradiction between the economic interests of the state and private business in the field of energy efficiency and power supply. Author proposes and formulates the management concept of power consumption of industrial enterprise. The concept includes a number of propositions, the dynamic normal of energy efficiency and energy saving playing the key role. It is regarded as a business model of energy efficiency and energy saving that provides the implementation of both economic and energetic strategies of enterprise.

  16. Grandi e piccole imprese industriali in Italia: dinamica e performance negli anni '80 a confronto. ( Large and small industrial enterprises in Italy: a comparison of dynamics and performance in the 1980s

    Directory of Open Access Journals (Sweden)

    B. CONTINI

    2013-12-01

    Full Text Available L' articolo esamina lo stato dell'industria italiana nel 1980 . Lo sviluppo delle piccole imprese e l'evoluzione delle piccole e medie imprese sono analizzate prima l'integrazione tra i servizi e l'industria è considerata . L'autore esamina quindi lo sviluppo della divisione del lavoro nell'industria italiana e l' ascesa e la caduta di piccole imprese . I processi di creazione di occupazione e posti di lavoro di distruzione attribuibile alle piccole imprese vengono trattati prima di un confronto internazionale dello sviluppo delle piccole e medie imprese e il loro contributo al mondo del lavoro è fornito. Dinamiche di confronto tra grandi e piccole imprese nel recente esperienza italiana sono considerati , prima che vengano forniti i risultati di una ricerca econometrica sulle imprese da un campione di 1984The article looks at the state of Italian industry in the 1980s. The development of the small businesses and the evolution of medium-sized enterprises are analysed before the integration between services and industry is considered. The author then looks at the development of the division of labor in Italian industry and the rise and fall of small businesses. Processes of job-creation and job-destruction attributable to small businesses are dealt with before an international comparison of the development of SMEs and their contribution to employment is provided. Comparative dynamics between large and small businesses in the recent Italian experience are considered, before the results of an econometric investigation on firms from a 1984 sample are provided.JEL: L16, O14, O52

  17. ON THE STRATEGIC DEVELOPMENT OF FOOD INDUSTRY ENTERPRISES

    Directory of Open Access Journals (Sweden)

    Dmytriy Nekhaychuk

    2018-01-01

    Full Text Available The article delas with the issues of strategic development of enterprises on the example ofthe food industry companies. The work suggests the classification of the factors influencing the strategy planning into internal and external ones, which, in their turn, can affect the quantitative indicators established by the enterprise as the objectives. It is clarified that taking into account the financial capabilities of the enterprise in strategic planning will allow to evaluate strategic ones more realistically. It is shown that the ultimate tasks of strategic planning are to correspond to the real capabilities of the enterprise and they are to be aimed at maximizing the use of the existing potential of the enterprise. When planning a corporate strategy, the main goal should be to create a different way of development, based on all resources and skills, which is the opposite of environmental constraints. The study also shows the company’s strategies in conditions of uncertain external environment. The investigation identifies some strategic goals that are the initial objectives of strategic planning, namely, it focuses on attractive markets, increasing the market segment, and retaining the existing market positions. It is proved that the preference for a specific development strategy of the industry depends on the existing positions and the positions that will be achieved as a result of the implementation of the previous strategies, the specifications of the goods circulating in the market, the market conditions and the degree of its competition, the development of state regulation, and the resource potential of the industry. As for the food industry enterprises, when choosing a strategy, it is suggested to use the following methods: “assessing the impact of macro-environment factors”, “determining the driving forces of the industry”, “clarifying and evaluating the key factors of success” and “determining the influence groups”.

  18. Investment-innovation mechanism of ensuring competitiveness of industrial enterprises

    Directory of Open Access Journals (Sweden)

    Kozyk Vasyl V.

    2014-01-01

    Full Text Available The article considers the process of formation of the investment-innovation mechanism of ensuring competitiveness of industrial enterprises. It identifies the essence, composition, goals and means of functioning of this mechanism. It establishes sequence of the process of functioning of the investment-innovation mechanism of ensuring competitiveness of economic subjects. It marks out such particular types of this mechanism: mechanism of renovation of fixed assets of an enterprise, mechanism of formation of channels and network of sales of enterprise products, mechanism of expansion of production capacity of the enterprise on manufacture of traditional types of products, mechanism of introduction of new progressive production processes, mechanism of development and production of innovation products, and mechanism of reduction of the level of risk of investment activity of the enterprise. The article conducts modelling of the process of development and realisation of investment solutions on introduction of progressive technologies of manufacture of products at the enterprise. It offers a method of selection of the most competitive variant of technology of manufacture of products depending on the level of quality and also specific current capital outlays for their manufacture.

  19. Routine-industrial planning in the ATOMMASh enterprise

    International Nuclear Information System (INIS)

    Zabara, V.N.; Kovalev, B.V.; Bobrov, A.A.; Gostishchev, V.S.; Edikhanov, V.P.

    1987-01-01

    Structure of automated system for routine-industrial planning, developed at the ATOMMASh enterprise is considered. 11 problems, enabling to calculate the duration of cycles of fabrication and lead of detail putting to departments, schedules of detail production in departments fo year, quater, mounth, production plans in norm-hours, equipment utilization, as well as problems, providing for schedule performance were developed. All operational data on the state of industry are concentrated in the data base of operational control

  20. Formation of power management strategy at the industrial enterprises

    Science.gov (United States)

    Akimova, Elena

    2017-10-01

    The article is dedicated to energy efficiency problems. The main recommendations about the development of the system of strategic power management at the industrial enterprise offered in the research include a number of the principles, aimed at the increase of the importance of human resources in information-and-analytical and innovative functions of power management. According to the results of the current situation analyses, the author suggests using some specific indicators of human resources, as they can contribute to the energy efficiency formation. The system of standardization is considered to be the basis for the implementation of strategic power management at the enterprises.

  1. Energy management оf industrial enterprise

    Directory of Open Access Journals (Sweden)

    Lyaskovskaya E.A.

    2017-01-01

    Full Text Available In the intensifying condition of economic situation and increasing competitiveness in domestic and foreign markets, the most important way to develop competitive ability of an industrial company is to reduce energy costs in the production process. Insufficient level of the efficiency of energy resources usage affects an industrial company’s performance indicators and its investment attractiveness. A promising way of solving this matter is to develop and implement a strategy of rational energy consumption, which is aimed at the realization of company’s potential to optimize the consumption of electric energy by using internal and external resources in order to minimize energy costs. The strategy of rational energy consumption defines how an industrial company acquires electric energy and uses it to sustain the production. While developing and implementing the strategy, one should use a systemic and complex way and consider the following: peculiarities of electric energy and power as products; the structure of electric energy market and the possibilities of its consumers; peculiarities of price-formation on electric energy market; technical and technological, organizational and administrative, social and economic parameters of a company, characteristic features of its resource potential and production processes; the results of company’s energy efficiency audit and energy problems; company’s reserves that can increase its energy efficiency. An integral strategy of energy consumption includes a strategy for energy preservation and efficiency and a strategy for energy costs management. Both strategies are interrelated and serve for one purpose, which is minimizing the energy costs. This division helps simplify the analysis, search for alternatives and realization of energy management on operative, tactical and strategic levels, considering the regional and industry-specific peculiarities of an industrial company, its financial performance and

  2. The Role of Large Enterprises in Museum Digitization

    Directory of Open Access Journals (Sweden)

    Ying Wang

    2014-12-01

    Full Text Available By actively promoting museum digitalization, Japan finds an idiosyncratic way to museum digitalization. The mode of collaboration, in which the government plays a leading role while large enterprises’ R&D capabilities and museum’s cultural dynamics are both allowed to give full play, turns these powerful enterprises into the solid backing of museum digitalization, provides a concrete solution to the common financial and technical challenges museums face in the process. In the course of such collaboration, large enterprises succeed in cultivating a number of talents who understand both business world and museum operation. Thanks to their experiences in the business world, compared with museum professionals, they play a more vital role in marketing the potential commercial exploitation of related digital technologies. The benefits large enterprises could possibly gain from such mode of collaboration - realizing social values, enhancing corporate image, for instance - help to motivate their active involvement, thereby forming a positive cycle of sustainable development.

  3. Eco-marketing in industrial enterprise activities

    OpenAIRE

    N.M. Chupryna

    2015-01-01

    The aim of the article. The aim of the article is determination of the areas of industrial enterprise’s development and detection of the specificity of their activity in terms of environmental priorities. The results of the analysis. The analysis of the research and publications of the leading scholars on the eco-marketing’s problem was conducted. The main factors of eco-marketing’s mechanism use were considered. Eco-marketing was determined as an important tool of the enterprises’ modern ...

  4. Prospects and opportunities the implementation of effective management models at the enterprises of the Russian industry

    Directory of Open Access Journals (Sweden)

    E. S. Balashova

    2016-01-01

    Full Text Available In 2015 the recession of the Russian economy continues. Economic forecasts of 2016 made by influential rating agencies and the International Monetary Fund are analyzed. It is emphasized that the course of structural economic changes, selected by the Russian government actualizes the issue of increasing the competitiveness of Russian industry on a global level that, in turn, contributes to the implementation of effective management models at the enterprises and organization of internal processes. Positively recommended concept of lean production abroad became popular in Russia in early 2000’s. First successful example of its implementation – CJSC “Ford Motor Company” is considered. A large number of enterprises which represent state corporations “Rosteh” and “Rosatom”, industrial group “Basic element”, OJSC “Russian Railways” and which are individual major representatives of the Russian industrial sector are investigated. Different ways of development of lean production by Russian enterprises are analyzed and the most common way – independent interpretation and implementation is identified. Review of the tools of this management model used at the Russian enterprises is paid great attention. The prevalence of such tool as 5S (approximately 87,5%, because of its visible simplicity of understanding and ease of implementation is noted. The most important indicator – the economic effect of the introduction of the lean production concept at the enterprises of Russian industry in 2014 is analyzed. It is concluded that the economic result of the use of management model at Russian industrial enterprises is extremely low and varies at most about 1% of revenue. The obtained results demonstrate the prospects of further development of lean production and prove the possibility of achieving a high competitiveness of the domestic industrial sector of economy.

  5. [The systemic and differential psychoprophylaxis of vascular brain diseases in the workers of an industrial enterprise].

    Science.gov (United States)

    Andreev, A G

    1994-01-01

    Basing on epidemiological, prospective and clinicopsychological data obtained on 1900 industrial workers of Nizhni Novgorod city, the system of psychoprophylaxis and psychotherapy of cerebrovascular diseases has been developed. The system of psychoprophylaxis was used with consideration of the disease stage and phase, psychic and psychosomatic status in risk groups, in subjects with initial and apparent symptoms of cerebrovascular failure. The psychoprophylactic system proved effective in the conditions of a large industrial enterprise.

  6. Quality Culture Development in the Industrial Enterprise

    Directory of Open Access Journals (Sweden)

    Renata Baravska

    2016-04-01

    Full Text Available This article examines the theoretical viewpoint of quality culture, its formation in industrial plants. Here is discussed cultural ap-proach to quality. It is determined that quality based on a cultural perspective is implemented not only by using tools and methods, but it is the result of cultural factors – exactly the company's values and practices. The values that affect a successful quality culture's integration into entire company's activity are overviewed. This article presents the study of key factors influencing the quality culture's development and it is proposed a conceptual model. The conclusions of performed empirical studies confirm that leadership and company's culture are of paramount im-portance and are the main success factors in developing of the quality culture in the company. The connection between leader-ship and empowerment certifies that each company itself is re-sponsible for the formation of the quality culture.

  7. Enterprise resource planning in a large construction firm: Implementation analysis

    NARCIS (Netherlands)

    Voordijk, Johannes T.; van Leuven, Arjen; Laan, Albertus

    2003-01-01

    In most large Dutch construction firms, Enterprise Resource Planning (ERP) systems have replaced nonintegrated information systems with integrated and maintainable software. The implementation of ERP systems in such firms is a difficult task. So far, ERP implementations have yielded more failures

  8. Development of Financial Security of Agro-Industrial Enterprises

    OpenAIRE

    Iryna Kryukova

    2012-01-01

    The concept of 'financial security' has been covered in the article. The theoretical basis of agro-industrial factories financial security development has been considered. In particular, the author has done an overview of different methodological approaches to determining the content of financial security and its components. The indicators of financial security of enterprise have been defined. Summing up the methodological aspects of providing business financial security the author proposes t...

  9. Business process of reputation management of food industry enterprises

    OpenAIRE

    Derevianko Olena. H.

    2014-01-01

    The goal of the article is development of the methodical base of reputation management directed at formalisation of theoretical provisions and explanation how to organise reputation management at food industry enterprises. The article shows prospectiveness of use of the Business Process Management concept in reputation management. Using the diagram of the Reputation Management business process environment the article shows its key participants (suppliers and clients of the business process) a...

  10. Research of factors of marketing pricing at domestic industrial enterprises

    OpenAIRE

    V.V. Bozhkova; I.M. Ryabchenko

    2013-01-01

    The aim of the article. The purpose of the article is research and systematization of factors of marketing pricing, which affect on realization of products of industrial enterprises.Works of domestic and foreign scientists on this issue were analysed. Traditionally pricing factors are classified into two groups: internal (controlled) and external (uncontrolled). Such division of factors is the first stage of pricing system analysis. On the second stage of analysis each of these groups is divi...

  11. A concept of environmental controlling for industrial enterprises

    International Nuclear Information System (INIS)

    Poelzl, U.

    1992-01-01

    The protection of nature is seen as a global challenge to mankind. Industrial enterprises are confronted with the question of how to contribute to the solution of environmental problems. In this study possibilities and concepts are printed out that would enable industrial enterprises to recognize and as a consequence reduce environmental pollution and risks caused by their products and production processes by means of organization. After a description of recent developments in the entrepreneur's surroundings brought about by environmental problems, and a characterization of environmental management, which can be seen as a reaction to the above mentioned developments, a concept of environmental controlling for industrial enterprises is developed deductively. Environmental controlling is here regarded as a sub-system of environmental management that supports the determination of environmental aims, the analysis, the planning and the control of environmental pollution, as well as the use of material and energy by installing and coordinating a specific environment information system. The main functions of environmental controlling are planning, controlling, informing, advising and some special functions. The specific functional instruments for carrying out these tasks are described in a special chapter. (author)

  12. The Extension Model of Sustainable Management of Industrial Enterprises

    Directory of Open Access Journals (Sweden)

    Aleksandr N. Kuzminov

    2016-09-01

    Full Text Available The paper discusses the problem of assessing the sustainability of an industrial enterprise in the context of a balanced use of limited resources. As a conceptual model approach is adopted to «3S» consider enterprise as a space that allows to combine different approaches to the sustainable development of enterprises at all stages of the life cycle. It is shown that the stability of viewing each space element is methodologically advisable to rely on system constraints, describing the boundary condition of temporary equilibrium, the achievement of which the local period synergistically causes some balance the allocation of limited resources of the enterprise. Financial stability, reflecting the nominal effective use of resources at all stages of the life cycle can be one of the proxy indicators for rapid assessment of the interaction of all subsystems, which optimality criterion proposed system coenoses restrictions. The above statement of the problem made it possible to formulate the basic requirements for the content criteria-based device diagnosis of possible states and justify the use coenosis sustainability as a synthetic approach that allows mathematically describe the self-organizing systems in the dynamics within the limits of survival. The algorithm of the mathematical and statistical evaluation of the financial resources of states, reflecting the degree of stability of the company as a consumer of scarce resources over time is offered.

  13. Business process of reputation management of food industry enterprises

    Directory of Open Access Journals (Sweden)

    Derevianko Olena. H.

    2014-01-01

    Full Text Available The goal of the article is development of the methodical base of reputation management directed at formalisation of theoretical provisions and explanation how to organise reputation management at food industry enterprises. The article shows prospectiveness of use of the Business Process Management concept in reputation management. Using the diagram of the Reputation Management business process environment the article shows its key participants (suppliers and clients of the business process and identifies their place in formation of the enterprise reputation. It also shows that the reputation management should be considered a business process of the highest level of management. Construction of the flow structure of the Reputation Management business process allows uncovering the logic of interrelation of inlets and outlets within the framework of the specified main stages of the business process: assessment of the current state of reputation, collection of information about stakeholders, identification of PR strategy goals, planning of necessary resources, realisation of the PR strategy, assessment of efficiency and process monitoring. The article offers the flow, functional and organisational structures of the Reputation Management business process for food industry enterprises. Moreover, justification of functional and organisational structures of the Reputation Management business process gives a possibility to distribute functions of reputation management between specific executors and establish responsibility for each stage of the business process.

  14. Methodical Approach to Managing Resources at an Industrial Enterprise

    Directory of Open Access Journals (Sweden)

    Antonets Olga O.

    2013-11-01

    Full Text Available The goal of the article lies in identification of optimal ways of managing material resources of an industrial enterprise on the basis of economic and mathematical modelling. In the process of analysis and systematisation of works of foreign and domestic scientists the article makes a conclusion about the insufficient degree of development of such complex solutions on formation of logistic systems of resource management, which would be simple and adaptive. The article provides results of the study of specific features of resource management at enterprises, among which – surplus (deficit of resources and availability of non-liquid reserves. In order to eliminate shortcomings the article offers a situational order of management with consideration of a possible state of reserves. The article improves the model of selection of the volume of supply of material resources and identifies optimal solutions with consideration of interval uncertainty. The further direction of the study lies in integration of the proposed approach to resource management with the system of financial planning at an industrial enterprise.

  15. FINANCIAL SECURITY OF FOOD INDUSTRY ENTERPRISES IN POLAND

    Directory of Open Access Journals (Sweden)

    Anna Bieniasz

    2016-06-01

    Full Text Available The aim of the study was to evaluate the fi nancial security of food industry enterprises in Poland in 2009–2013, with particular emphasis on the processing industry of milk and cheese production, including those operating in the form of dairy cooperatives. The analysis was conducted using unpublished data of GUS, as well as individual fi nancial data on dairy cooperatives. The study indicates that the manufacturing sector of food and beverage production, as well as milk processing and cheese making, according to the established measures of fi nancial security, can be considered safe. This assessment, however, is varied and results from the specifi c industries, especially in relation to capital management.

  16. MOTIVATION AND STIMULATION SYSTEM OF THE PERSONNEL OF INDUSTRIAL ENTERPRISES

    Directory of Open Access Journals (Sweden)

    Aliona Klymchuk

    2016-03-01

    Full Text Available This article is devoted to the problems of studying the system of motivation and stimulation of personnel at the industrial enterprises, which are important in today's conditions. The purpose of the study is a detailed analysis of system characteristics and motivation of personnel at the enterprises. It is proved that the enterprise's management must constantly deal with the improvement of the system of motivation and stimulation of personnel, that should be adapted to the new conditions for the market functioning. The author notes that the system of motivation and stimulation at the industrial enterprises is effectively connected with the problem of production activities at the enterprise and the final results of its operations increasing and the living standards of workers improving. In the article the basic functions (attracting qualified specialists, preservation groups of professionals within the required time limit, which must perform a system of motivation and stimulation of the personnel at the enterprise are determined. The main tasks that are necessary to ensure the desired level of labor activity of personnel are formed: determining a set of values that should form the basis of personnel motivation; needs formation of each employee, his interests and capabilities of pleasure; specification of the types of work that require the enterprise and that it is advisable to motivate; labour organization so as to convince the employee's ability to satisfy its interests; coordination of certain types of worker with a set of values and preferences; clarify the motives, interests and values when hiring an employee at the enterprise. In order, to form the control system of motivation and stimulation, the need for the following conditions are stressed: availability of complete and accurate information about equipment management; the need to have permanent representation on the status and dynamics of the motivational orientation of personnel

  17. FEATURES MANAGEMENT OF INDUSTRIAL ENTERPRISES IN AN UNSTABLE ENVIRONMENT

    Directory of Open Access Journals (Sweden)

    Andrey Vladimirovich Velikoselsky

    2014-10-01

    Full Text Available High variability of the external and internal environment of the company determines the characteristics of the industrial enterprise management. Under these conditions, a high importance is the professionalism of the management team. The main task of the head is not only in maintaining the functioning of the production system, but also to improve and, in some cases, and the creation of new, more efficient production system. Managers involved in these tasks, it is necessary to continuously monitor requirements and adapt to changing external conditions of functioning of enterprises (units. To do this, it is advisable to use an appropriate organizational structure.In an innovative organizational structure of the functional manager is aimed at continuous development of the company and its most important part is the study of the formation and representation of staff about the goals and methods of achieving them, the development of the basic values of the personnel, the formation of organic relationships and connections, ensuring its harmonious cooperation in the development of the enterprise. In order to achieve a coherent interaction of employees needed concordance, which can significantly improve the efficiency and safety.

  18. Electricity supply enterprises: Profits in comparison between industries

    International Nuclear Information System (INIS)

    Kuehnl, U.

    1995-01-01

    The acquisition of participations by major electricity supply enterprises during the last years met with strong criticism from the general public and revived the controversial discussion about electricity prices and profits. Yet the electricity industry is subject to specific legal price controls guaranteeing a price formation that is cost-economical, just and fair under the causation principle and does not permit excessive profits. Under this aspect and against the background of discussing this issue on an economic basis the author presents an empirical survey. (orig.)

  19. Public enterprises in natural resource industries: an economic analysis

    International Nuclear Information System (INIS)

    Fulton, M.E.

    1985-01-01

    Public enterprises are playing an ever increasing role in natural resource industries. This research analyzes the reason for this involvement, i.e., what have been the objectives of public firms, the objectives of other firms; and the reasons behind exploration in natural resource industries. An answer to the first question was obtained by estimating the objective function of a publicly owned uranium company operating in Saskatchewan, Canada. It was assumed the company solved a linear quadratic optimal control problem. The conclusion was that over the period 1974-1984 the company preferred to trade off profits for higher employment, larger reserve holdings, and greater output. The objectives of the other firms in the Saskatchewan uranium industry were also investigated. It was found that producers integrated with utilities can expect to make a much greater rate of return on exploration that nonintegrated producers, since the former group stands to gain both from the reduction in costs and the reduction in price resulting from exploration. The suggests that overinvestment in the Saskatchewan uranium industry may be a problem. The final item investigated is the normative question of what the objective of a public firm operating alongside a private firm in an oligopolistic industry should be in order that resources in the industry are used efficiently; the answer to this question depends upon the structure of the industry

  20. Systematization of Cost Factors for Cost Management at Industrial Enterprises

    Directory of Open Access Journals (Sweden)

    N. Y.

    2017-12-01

    Full Text Available Identification and structuring of factors determining the cost level has significant importance in cost analysis and control. Cost factors need to be systematized for more effective cost management. The objective of the study is to identify and structure the factors with impact on the enterprise costs. The external and internal factors with impact on the enterprise costs in industry are highlighted. For cost management purposes, it is proposed to group the cost factors into the two categories: structural and functional. The essence of structural and functional factors is shown; a classification of functional factors is given. The effect of a structural factor such as products range (complexity is illustrated. As the factor of complexity, combined with cost analysis systems and innovative tools of analysis (ABC and XYZ methods, has been increasingly in focus of analysts, three problems are described which, once dealt with, will enable ABC method to fit into the cost management system. The importance of another structural factor of costs, technology selection, in cost management is shown. The analysis allows for the following conclusions: for purposes of current cost management, including one based on operational analysis, the output needs to be addressed as the central factor determining the cost level; in the strategic perspective, an enterprise needs to concentrate on calculating the costs for the structural alternatives that are supposed to determine its competitive position; for cost management purposes, the cost factors should be broken into two categories, structural and functional; a specific management system exists for each cost factor, which is greatly important for the positioning of an enterprise.

  1. Management of Ecological and Economic Security of Industrial Enterprises

    Directory of Open Access Journals (Sweden)

    Ivantsova Elena Anatolyevna

    2014-11-01

    Full Text Available The purpose of this study was the modeling of ecological and economic security of production processes in an industrial plant using methods of fuzzy logic. The subject of the research – methods of modeling systems of ecological and economic security of industrial enterprises, based on the adaptation of fuzzy set theory to solve this problem. In the research process the following scientific methods and techniques were applied: scientific abstraction, analysis, synthesis, methods of grouping, comparison, etc. Along with the traditional methods the authors used the tools for simulation modeling, fuzzy sets systems, computer simulation MatLab. The informational and empirical basis of the research was formed on the basis of the data of the Federal service of state statistics and its territorial subdivisions of the Ministry of economic development of the Russian Federation, e-resources of the Internet, the research by Russian and foreign scientists, experts’ assesments. The article presents the author’s method of ensuring ecological and economic security in the enterprise by means of fuzzy logic, based on the quantitative assessment of indicators of threats in MatLab and results of visualization of fuzzy-multiple modeling of ecological and economic security. The algorithm of calculation of the conditional environmental pressures on water resources and the atmosphere, allowed to determine the dependence between the cost of wastewater treatment and economic damage from pollution and to evaluate the effectiveness of various conservation programs, and to analyze their impact on environmental sustainability. The authors also develop complex fuzzy models and implemented their software in the MatLab Fuzzy Logic Toolbox, which allowed to obtain an integrated assessment of the state of the enterprise environmental safety and comparisons of the values of these threats based on assessment. The author presents the author’s methodology and the evaluation

  2. Cost-based industrial enterprise human capital management

    Directory of Open Access Journals (Sweden)

    Glukhov Sergei

    2017-01-01

    Full Text Available The paper focuses on importance of human capital in development of industrial enterprises, issues of their management and methods of achieving balance between interests of owners and employees. Difference between such concepts as human and labor potential as well as human and working capital is clarified. The special attention is paid to the fact that an effective system of motivation and incentivation of labor is to serve as means of rapprochement of human and labor capital. The authors point out the limited scope of the traditional forms of labor motivation and incentivation mechanisms and highlight the complexity of their encouragement for collective work results. The authors suggest using the cost-based approach to workforce management, which is based on assessment of market and intrinsic value of human capital in view of investment and quality characteristics. The proposed approach is attended by methodological support and operational calculations. The study states that the suggested human capital management model can be introduced into practice, as well as substantiates the necessity for boosting the performance of industrial enterprises and their cost by increasing production, stimulating the staff for selfrealization and self-improvement by bringing the owners’ corporate interests closer to the interests of the employees.

  3. THE INNOVATION ACTIVITY OF INDUSTRIAL ENTERPRISES IN UKRAINE: STATE AND TRENDS

    Directory of Open Access Journals (Sweden)

    O. Miroshnychenko

    2013-09-01

    Full Text Available The article includes analytical results of innovation activity of Ukrainian industrial enterprises. The enterprise innovation activity level, the level of innovations implementation into the Ukrainian industry has been researched. The dynamics of new innovation products and new technological products put into service, share of the innovation product sold in industrial output has been analysed. The level of the use of different types of innovation by industrial enterprises (marketing, organizational, process and product innovation has been determined. The main sources of finance for innovation activities have been considered. The dividing of innovation activity costs in industrial sector has been considered. The main problems of innovative development of the Ukrainian industry have been determined. The activity of industrial enterprises in Ukraine is characterized by a low level of innovation activity, an insufficient volume of realized innovative products, a low financing of innovation activity. The suggestions, which shall promote the effectiveness of innovation activity of Ukrainian industrial enterprises, have been put forward.

  4. Success Factors of Asymmetric Connections - Example of Large Slovenian Enterprises

    Directory of Open Access Journals (Sweden)

    Viktor Vračar

    2014-11-01

    Full Text Available More and more companies realize the fact that networking or partner collaborations, which are based on partner relations between companies, are essential for their long-term existence. In today’s global competitive environment each company is included at least in some different connections. Very common connections occur between large and smaller enterprises, where the so called asymmetric connections occur, which may be understood as the ability of one organisation to establish power, influence and control over the other organisation and its resources. According to numerous statements, the connections between enterprises are very frequently uneffectivenessful, with opinions on the optimal nature of asymmetric connections being quite common as well, whereby it is, as a rule, a synergic complementing of missing content for both partners. To verify the thesis, that companies achieve more competitiveness and effectiveness through connections, whereby the so called asymmetric connections are common, a structural model of the evolution of asymmetric connection has been developed, which connects the theoretically identified factors and all dependent concepts of competitiveness, efficiency and effectiveness. The empirical research also attempts to further expose the factors of asymmetric connections, which affect efficiency and effectiveness of the connected enterprises.

  5. Development of Tools for Ensuring the Quality of Labor Potential of Industrial Enterprises

    Directory of Open Access Journals (Sweden)

    Ruslan Skrynkovskyy

    2017-09-01

    Full Text Available The purpose of the article is to deepen theoretical and methodological provisions and to develop tools for ensuring the quality of labor potential of industrial enterprises. It was established that the basis of the development of tools for quality assurance of labor potential (within the framework of the development of industrial enterprises lies the system of goals of managerial diagnostics of an industrial enterprise, which includes such key diagnostic objectives as: 1 diagnostics of the effectiveness of controlling the internal business processes of the enterprise; 2 diagnostics of the effectiveness of the typical organizational structure of enterprise management; 3 diagnostics of the efficiency of standardization of the work of linear and functional managers and specialists at the enterprise; 4 diagnostics of the enterprise in the areas of vocational education, labor activity and motivation, innovation work and social development; 5 diagnostics of management policies in the areas of social responsibility, information security and labor protection; 6 diagnostics of the level of conflict in the team at the enterprise 7 diagnosis of the effectiveness of the use of information technology in the management of the enterprise. It was determined that effective management of the quality of labor potential of the personnel (on the basis of its objective assessment is one of the key conditions that determines the success of industrial enterprises. The prospect of further research in this direction is improving the system of diagnostics and planning of reserves for improving the quality of labor potential of an industrial enterprise in crisis conditions.

  6. Application of Specific Features of Industrial Products when Forming and Developing Brands of Industrial Enterprises

    Directory of Open Access Journals (Sweden)

    Yatsentiuk Stanislav V.

    2014-03-01

    Full Text Available The article analyses and structures approaches and principles of formulation of industrial products. It offers classification of goods and markets of industrial products by their characteristics and participants. It identifies main participants that make decisions at B2C and B2B markets and characterises their specific features and motivation when making decisions on purchase of products of industrial enterprises. It studies and analyses indicators of development of domestic markets of consumer goods and market of industrial products and dynamics of development of their relation in retrospective view.

  7. Successful competitive strategies of large Croatian and Slovenian enterprises

    Directory of Open Access Journals (Sweden)

    Marin Buble

    2003-01-01

    Full Text Available In this research report, the authors identify and analyze the successful samples of strategic behaviour of large Croatian and Slovenian enterprises, as well as their similarities and dissimilarities. The research has encompassed the levels of corporate and business strategy (i.e. the strategy of a diversified firm and its strategic business units/areas, as well as the analysis of strategic performance and sources of competitive advantage. The research consists of two parts: the theoretical foundation for the analysis of the successful patterns of strategic behaviour and the empirical analysis, based on the primary data collected during the research project.

  8. Increasing economic stability of the industrial enterprise as a result of its market value modeling

    Directory of Open Access Journals (Sweden)

    Efimova M.G.

    2017-01-01

    Full Text Available The article deals with an urgent problem of the Russian and global economic stability. The issues of management of the modern industrial enterprise in the conditions of variable economy are considered in this research. Also the article highlights the importance of evaluation of industrial enterprises in Russia nowadays. The management model of the industrial enterprise cost based on sustainability criteria is constructed. The author focuses on new approaches to mathematic modeling of business evaluation. The article contains graphs and charts related to performance of enterprise system and different business strategies based on economic sustainability. Relevant problems of management by means of business assessment for enterprises owners and top managers are defined. The aim of the article is to suggest measures for the Russian industry to manage the cost of enterprises and consequently, to make national economy management more effective.

  9. Theoretical and methodological construction of ecological economic and analysis of operations industrial enterprises

    Directory of Open Access Journals (Sweden)

    D.O. Gritsishen

    2015-09-01

    Full Text Available To form an effective analytical maintenance of economic and environmental security of industrial enterprises were justified assumptions of ecological and economic analysis. In particular, the goal (the formation of the effect of business enterprises, based on established causal link that allows you to get a comprehensive assessment to management decisions to change the parameters of governance in general and individual management subsystems aimed at ensuring the environmental and economic safety of industrial enterprise and task object (causal relationships that characterize the state of the relationship of economic activity to the environment and determine the level of environmental and economic security of industrial enterprise and object (economic activity in partial relationship with the environment that determine the level of environmental and economic security of industrial enterprises. It is possible to expand understanding of economic analysis in general and its importance in ensuring effective interaction with the enterprise environment.

  10. Relation of average and highest solvent vapor concentrations in workplaces in small to medium enterprises and large enterprises.

    Science.gov (United States)

    Ukai, Hirohiko; Ohashi, Fumiko; Samoto, Hajime; Fukui, Yoshinari; Okamoto, Satoru; Moriguchi, Jiro; Ezaki, Takafumi; Takada, Shiro; Ikeda, Masayuki

    2006-04-01

    The present study was initiated to examine the relationship between the workplace concentrations and the estimated highest concentrations in solvent workplaces (SWPs), with special references to enterprise size and types of solvent work. Results of survey conducted in 1010 SWPs in 156 enterprises were taken as a database. Workplace air was sampled at > or = 5 crosses in each SWP following a grid sampling strategy. An additional air was grab-sampled at the site where the worker's exposure was estimated to be highest (estimated highest concentration or EHC). The samples were analyzed for 47 solvents designated by regulation, and solvent concentrations in each sample were summed up by use of additiveness formula. From the workplace concentrations at > or = 5 points, geometric mean and geometric standard deviations were calculated as the representative workplace concentration (RWC) and the indicator of variation in workplace concentration (VWC). Comparison between RWC and EHC in the total of 1010 SWPs showed that EHC was 1.2 (in large enterprises with>300 employees) to 1.7 times [in small to medium (SM) enterprises with enterprises and large enterprises, both RWC and EHC were significantly higher in SM enterprises than in large enterprises. Further comparison by types of solvent work showed that the difference was more marked in printing, surface coating and degreasing/cleaning/wiping SWPs, whereas it was less remarkable in painting SWPs and essentially nil in testing/research laboratories. In conclusion, the present observation as discussed in reference to previous publications suggests that RWC, EHC and the ratio of EHC/WRC varies substantially among different types of solvent work as well as enterprise size, and are typically higher in printing SWPs in SM enterprises.

  11. Modernisation of production as a factor of influence on economic stability of the industrial enterprise

    Directory of Open Access Journals (Sweden)

    Varkova N.Yu.

    2017-01-01

    Full Text Available The present article considers key problems of modernising production process at industrial enterprises, also referred to as reengineering, in modern conditions of Russian economics. Having analysed factors that affect operation of business, the author presents the model of interdependence between modernisation of production and sustainable development of the enterprise. Based upon analysis of Russian and foreign sources there were formulated fundamentals of the modernisation process and presented an algorithmic mechanism of enabling modernisation at the industrial enterprise. The said mechanism takes into account main aspects of sustainable development of the industrial enterprise and evaluation parameters as to the modernisation efficiency.

  12. Energy and environmental market in industrial enterprises in Thailand

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-04-01

    This paper discusses markets related with energy conservation and environment preservation in industrial enterprises in Thailand. The present Thailand is not in a situation that investments are made into environmental businesses or energy saving businesses. However, the attitude of the government toward environment is that emphasis is placed on solving the environmental pollution problems. Laws and regulations are defined for assistance in environment preservation to corporations making efforts to increase export, resource protection and energy conservation. These measures lead to expectation on bright future in developing technologies and markets related to environment preservation and energy conservation. Control of wastes by using clean technologies and enhancement in productivity are very important issues for the export of Thailand partly because European countries and America set these requirements as a condition for transaction. The markets related to energy conservation and environment preservation are anticipated of participation from such businesses as consultants, device manufacturers, and inspection and analysis of environmental effects. (NEDO)

  13. Job Stress in the United Kingdom: Are Small and Medium-Sized Enterprises and Large Enterprises Different?

    Science.gov (United States)

    Lai, Yanqing; Saridakis, George; Blackburn, Robert

    2015-08-01

    This paper examines the relationships between firm size and employees' experience of work stress. We used a matched employer-employee dataset (Workplace Employment Relations Survey 2011) that comprises of 7182 employees from 1210 private organizations in the United Kingdom. Initially, we find that employees in small and medium-sized enterprises experience lower level of overall job stress than those in large enterprises, although the effect disappears when we control for individual and organizational characteristics in the model. We also find that quantitative work overload, job insecurity and poor promotion opportunities, good work relationships and poor communication are strongly associated with job stress in the small and medium-sized enterprises, whereas qualitative work overload, poor job autonomy and employee engagements are more related with larger enterprises. Hence, our estimates show that the association and magnitude of estimated effects differ significantly by enterprise size. Copyright © 2013 John Wiley & Sons, Ltd.

  14. INTERACTION BETWEEN MODELS OF THE LIFE CYCLE OF INDUSTRIAL ENTERPRISE AND CYCLE OF ITS REORGANIZATION

    Directory of Open Access Journals (Sweden)

    Chulkov Vitaliy Olegovich

    2012-10-01

    Full Text Available The objective of this scientific research is to develop a theoretical model of organizational and technology-related processes of reorganization of industrial enterprises, as well as their interaction. Multipoint logic notions of growth and interaction phases are used as research methods. The author describes the basic stages of reorganization, the life cycle of industrial enterprises and the cycle of their transformation. The processes are presented as an infographical image that represents a concentric model of interaction. This concentric model represents interaction between two or more phases. The process is entitled infografical modeling on the polyfunctional level. The concentric model moves both clockwise and anti-clockwise. Basic organizational and technological processes of reorganization of industrial enterprises that include decision making in terms of expediency of reorganization, design, construction, and performance of industrial enterprises at full capacity, and further operation of the industrial enterprise are described in the paper. Attainment of this objective, namely, reorganization of an industrial enterprise, involves a huge amount of resources, including labour resources that need interaction with all parties of reorganization; therefore, the concentric model of interaction describing the basic cycle of reorganization, the life cycle of an industrial enterprise and the cycle of its conversion is a trustworthy representation of this process. The proposed concentric model of interaction should be used in the design of organizational and technology-related processes for integrated consideration of reorganization of enterprises required to understand and improve the efficiency of reorganizations and to control the reorganization of industrial facilities.

  15. Salary administration as part of employee incentive system at industrial enterprises

    Directory of Open Access Journals (Sweden)

    Sagandykov Michail

    2017-01-01

    Full Text Available The article analyses the financial staff incentives at industrial enterprises. The paper concludes that the incentive system should be developed taking into account the developed staff motivation. The only efficient target of influence is the existing staff motivation components. A 3-element employee incentive framework for industrial enterprises is suggested. The article presents the critical analysis of the existing payroll systems of several industrial enterprises, elicits the common flaws of the incentive payments, and develops requirements for such systems. The paper also provides an industrial enterprise needs matrix and an incentive payment types matrix required to build up a rational monetary staff incentive system. These matrices can be adapted for any industrial enterprise with regard to its long-term objectives.

  16. Logistics Concepts at the Industrial Enterprise under Conditions of the Globalization of Markets

    Directory of Open Access Journals (Sweden)

    Trushkina Nataliia V.

    2016-08-01

    Full Text Available The aim of the article is to assess the dynamics of indicators of Ukraine’s foreign trade in goods and services; conduct a comparative analysis of logistics concepts used at industrial enterprises under conditions of the globalization of markets; determine the ways to improve the management of international production and distribution activities of industrial enterprises. The study analyzes the dynamics of volumes of exports–imports of goods and transport services in Ukraine; freight traffic by mode of transport; export, import and transit of goods; foreign direct investment from countries of the world in the Ukrainian economy. Modern information systems and logistics concepts used at industrial enterprises under conditions of the globalization of markets are considered. The ways to improve the management of international production and distribution activities of industrial enterprises are defined and systematized. Prospects for further research in this direction are the development of proposals for information support of providing services for customers of the industrial enterprise.

  17. The Budgeting as an Instrument of the Financial Planning System of Industrial Enterprises

    Directory of Open Access Journals (Sweden)

    Fedorenko Iryna A.

    2018-02-01

    Full Text Available The article is concerned with generalization of conceptual aspects of budgeting at industrial enterprise. The existing approaches of researchers to the essence of the concept of «budgeting» have been systematized. The subject, object, purpose, tasks, principles, and functions of the budgeting process have been defined. As a result of the research, the budgeting system and the stages of budgetary planning at the industrial enterprise have been structured in detail. The role and possibilities of budgeting for effective management of financial and economic activity of industrial enterprises have been clarified. Also the negative features of budgeting are described, which can affect the efficiency of its implementation in the practice of industrial enterprises. Directions for improvement of budgeting system at industrial enterprises have been defined.

  18. FORMATION OF ECONOMIC MECHANISM OF INDUSTRIAL ENTERPRISE DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Shestakova E. V.

    2015-06-01

    Full Text Available Now in research of social and economic systems synergy approach according to which the entity represents the open self-organizing (spontaneous system gains ground. Such representation of the entity in the context of modern economic science requires development of new mechanisms and management tools. The purpose of researches in the sphere of synergy management is development of mechanisms of self-organization, and also information filling of its elements. Complexity of processes of self-organization dictates need of integration of separate types of the mechanisms differing on a method of creation, uniformity of elements, complexity, a strategic orientation, target orientation, management functions. Thus, the integrated mechanism of self-organization of the entity represents multi-level system of the interconnected mechanisms (organizational, economic, information, motivational differentiated on elements. In article content of the economic development mechanism of the entity reveals; its purposes, subjects, objects, the principles, methods, tools and resources are considered. On the basis of research of features of development of social and economic systems the ratio of stages of enterprise lifecycle with self-organization process stages is established. The principles of the economic development mechanism of the entity are proved: financial independence, self-sufficiency, economic feasibility, responsibility, resource capability, economic control, interest. Methods of the economic mechanism (planning and forecasting, marketing activity, economic diagnostics, financial credit policy, economic incentives are allocated and the tools corresponding to them are proved. Features of sale of the economic mechanism at stages of dynamic balance and bifurcation are established. The practical importance of results of research consists in development of development mechanisms of the industrial enterprises promoting achievement of long-term competitive

  19. Scientific and methodic approaches to reveal stability essence at the industrial enterprises and its functional components

    Directory of Open Access Journals (Sweden)

    Lyulyov Oleksii Valentynovych

    2016-12-01

    Full Text Available The article deals with theoretical analysis of the scientific approaches concerning definition of the concept “stability”, which exist in the scientific literature. There are five different approaches to interpret the concept “enterprise stability”, as an open economic system. On this base, the author’s definition of the enterprise stability is formed. Due to the carried out analysis of the main tendencies in changes of the industry development factors for 2006-2015 and future expectations, the main functional constituents of the enterprise stability. The author suggests to use an approach of self-organizational artificial neural networks to evaluate stability degree at the industrial enterprises.

  20. Building a Model for Optimization of Informational-Analytical Ensuring of Cost Management of Industrial Enterprise

    Directory of Open Access Journals (Sweden)

    Lisovskyi Ihor V

    2015-09-01

    Full Text Available The article examines peculiarities of building a model of informational-analytical optimization of cost management. The main sources of information together with approaches to cost management of industrial enterprises have been identified. In order to ensure the successful operation of enterprise in the conditions of growing manifestations of crisis, a continuous improving of the system for enterprise management along with the most important elements, which are necessary for its normal functioning, should be carried out. One of these so important elements are costs of enterprise. Accordingly, for an effective cost management, the most appropriate management approaches and tools must be used, based on a proper informational-analytical support of all processes. The article proposes an optimization model of informationalanalytical ensuring of cost management of industrial enterprises, which will serve as a ground for more informed and economically feasible solutions. A combination of best practices and tools to improve the efficiency of enterprise management has been proposed

  1. TECHNIQUE OF AN ASSESSMENT OF COMPETITIVENESS OF THE ENTERPRISES OF THE FURNITURE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Vitaliy A. Zhigarev

    2015-01-01

    Full Text Available The purpose of this article is the description of an author’s technique of an assessment of competitiveness of the enterprises of the furniture industry which mainobjective is the economic assessment ofproduction efficiency of production of thefurniture enterprise, an assessment ofthe intra firm making production efficiencyof furniture, identification of the factors influencing overall performance of thefurniture enterprise.

  2. BASICS OF FORMATION FOR A CONTROLLING SYSTEMS AT THE ENTERPRISES OF THE AVIATION INDUSTRY

    Directory of Open Access Journals (Sweden)

    Kruglova Irina Sergeevna

    2013-05-01

    Full Text Available The main purpose of this article is to present the need for the introduction of elements system of controlling of large industrial plants, particularly in the aviation sector, as at this stage there is a need for understanding the most modern management techniques. Research in this area is based on the practical experience of individual aviation companies, as well as their work in cooperation, the general trend of industrial corporations to understand the need for the introduction of innovative control systems. The article provides a stepwise algorithm for setting the controlling system as a strategic structure to integrate all areas of life of the enterprise for the purpose of providing information in any necessary form. The results of this work may be useful to specialists in the field of management, changing as well as the financial and economic services industry aviation sector.

  3. Informative providing of processes of development on industrial enterprises

    OpenAIRE

    Kalinichenko, L.

    2010-01-01

    Information is definite by the basic resource of activity of enterprises. Suggestion in relation to the selection of informative subsystems of strategic, tactical, operative management is borne. The list of indexes in relation to estimation of the informative providing of functional processes of enterprise is offered.

  4. Analyzing the Contents of the Orders on Accounting Policy of Hotel Industry Enterprises

    Directory of Open Access Journals (Sweden)

    Kovalevskaya Nadezhda S.

    2017-10-01

    Full Text Available The article is aimed at carrying out an analysis of the contents of the orders on accounting policy of hotel industry enterprises and developing an optimal structure of the accounting policy parameters for the enterprises in this sphere. The contents of the «On accounting policy» orders was analyzed in terms of the organizational, technical and methodological divisions of the hotel industry enterprises of the Kharkiv region. In order to optimize the accounting process at the hotel industry enterprises, a structure of the hotel’s accounting policy parameters has been developed and recommendations have been made to improve the methodology of its design, which would facilitate rationalizing the formation of information resources to manage enterprise and improve performance without significant changes in the organizational structure and substantial financial investment.

  5. Building Industry Enterprises Logistic System according to their Life-cycle and Organizational Adaptation

    Directory of Open Access Journals (Sweden)

    Natalya Voznenko

    2016-01-01

    Full Text Available This article presents a survey of the Ukrainian machinery-building industry enterprises performance in 2012-2014 due to the state of their logistic systems development and companies’ life-cycle stage. The review of existing theoretical approaches shows the range of possible criteria for evaluation at each level of the industry, enterprise and product. The conducted research evaluates the Ukrainian machinery-building industry and the companies that create that potential. The peculiarities of the organizational adaptation of the above mentioned enterprises and the developed recommendations will help to establish an adaptive management and gain enterprises’ market competitiveness.

  6. Formation of activation mechanism for investment maintenance management of gas industry enterprises

    Directory of Open Access Journals (Sweden)

    Вікторія Валеріївна Чорній

    2016-11-01

    Full Text Available The problematic aspects of the existing management mechanism of investment management of gas industry enterprises are analyzed in the article. The ways of their elimination are suggested in accordance with the Energy Strategy of Ukraine – 2035 at different levels of its operation. The ways of improving the investment management mechanism of the enterprises in this industry on three levels are proved. Activation mechanism for investment maintenance management of gas industry enterprises is developed as result of research. Its implementation will allow enterprises of the industry to increase its investment attractiveness and effectively carry out the procedure for enterprises’ entry to the market of initial public offering to raise the required amount of investment resources for the modernization of investigated industry.

  7. Efficiency Evaluation of Construction of Steam-Turbine Power Plants at Industrial Enterprises

    Directory of Open Access Journals (Sweden)

    A. L. Starzhinsky

    2007-01-01

    Full Text Available It is shown that application of own power stations at an industrial enterprise is considered as an expedient one if there is an availability of thermal power sources because value of an optimization criterion exceeds corresponding optimization criterion by 2.1-4.6 fold when an enterprise is supplied with power only from power system networks.

  8. Application of information technology in the process analysis of structural subdivisions of light industry enterprises

    Directory of Open Access Journals (Sweden)

    Тарана Тахир кызы Мусаева

    2016-02-01

    Full Text Available The problems of application of information technologies in the process analysis of structural subdivisions of the enterprises of light industry enterprises are considered. For the functional cost analysis in the company it was prepared a computerized structure of the workplace and its principle of operation is described. The functionality of the computerized workplace is tested for textile enterprises. The results showed that the use of information technology has good prospects at the implementation of the quality management system at the textile enterprises

  9. ADVANCING INTERNATIONAL COMPETITIVENESS AS A FACTOR OF DEVELOPMENT OF INDUSTRIAL ENTERPRISE

    Directory of Open Access Journals (Sweden)

    L. Yarosh-Dmytrenko

    2017-08-01

    Full Text Available In the article the problem of advancing the international competitiveness of industry has been highlighted in the context of the impact on getting out the crises in the country and forming preconditions for economic growth. The study is based on an empirical basis of metallurgical industries of Ukraine, which has traditionally focused largely on international markets. The advancing international competitiveness of these enterprises is particularly topical and important for getting over the crisis and forming a trajectory of economic development of the country. The system of the factors has been represented and analysed, the priorities for advancing the international competitiveness of metallurgical industryJSC "Zaporizhstar.Recommendations to improve the competitiveness of the analysed enterprise have been formulated and common priorities for improving the international competitiveness of steel companies determining the possibility of positive impact on getting over the crisis and economic development at the level of companies, as well as at the level of Ukraine’s economy have been identified.

  10. Maintenance Management Systems in the Czech Enterprises of Chemical and Food Industries

    Directory of Open Access Journals (Sweden)

    Lenka Branska

    2016-12-01

    Full Text Available Purpose of the article: The aim of this article is to use the results of the qualitative research to describe the current form of maintenance systems used in enterprises of chemical and food industries, and then to discuss and generalize the results. Methodology/methods: The primary qualitative research was conducted in five companies, which can be regarded as typical representatives of the industries. The main objective of the primary research in individual companies was to determine how they perform the strategic and tactical operational planning of maintenance, implementation of these plans and their control. Individual interviews with respondents were used as the research method. The results of the research were processed using the content analysis method. Subsequently, comparison of the findings from individual businesses and subsequent synthesis thereof was performed, which allowed making generalizations. Scientific aim: The scientific aim of the article is to develop knowledge in the field of maintenance management by specifying the form of the maintenance systems utilized in Czech enterprises of the chemical and food industries and identifying the main opportunities for their improvement. Findings: Czech enterprises of the chemical and food industries utilize maintenance management systems. These systems are aimed at prevention, emphasizing the planning of maintenance activities in fixed periodic intervals. Also, they often utilize diagnostic maintenance. However, the maintenance systems currently used cannot be considered fully operational, with regard to the relatively large volume of after-failure repairs. Conclusions: Production equipment maintenance systems are irreplaceable in chemical and food industry enterprises, but there is great potential for improvement. Improvement should be focused on the area of strategic as well as tactical and operational planning of production equipment maintenance. In terms of strategy, the biggest

  11. The Business Model is an Effective Tool of Crisis Management at Industrial Enterprise

    Directory of Open Access Journals (Sweden)

    Artur D. Bobryshev

    2017-01-01

    Full Text Available Purpose: justification of expediency of application of the concept of business simulation for effective prevention and mitigation of consequences of crisis of the industrial enterprise and for ensuring his sustainable development in the conditions of stagnation of branch. Methods: during the research methods of the analysis of a financial condition of the enterprises, the structural analysis and business simulation are used. Actual data about work of the industrial enterprises are attracted from official statistical sources and from materials of long-term consulting practice of authors. Results: stagnation of the domestic industry and lack of effective industrial policy force the enterprises having growth potential to conduct independent search of ways of recovery from the crisis and increase in the stability. The modern economic thought suggests to use the "theory of firm" which has confirmed the solvency for the solution of these tasks. The research has shown that and subsequently to eliminate with one of tools of this theory capable to weaken considerably the factors causing crisis, to provide effective development of the enterprise, the concept of business simulation is. Conclusions and Relevance: results of a research prove that for prevention of crisis of the industrial enterprise, overcoming his consequences and creation of conditions of his sustainable development, not only the package of measures for financial improvement or restructuring, but in general modification of a business model of the enterprise as the decision directed to elimination of all range of factors of insolvency of business is necessary. 

  12. Evaluation of “direct input” effectiveness for industrial enterprises power supply

    Directory of Open Access Journals (Sweden)

    Malinina Tatyana

    2017-01-01

    Full Text Available The cost of energy has increased significantly for the industrial enterprises over the recent years, due to an increase in the electricity tariffs and the changes in the rules of the electricity market. Tariffs for electricity sold to consumers, differentiated according to various parameters, one of which is the voltage range. The higher the voltage range, the lower the tariffs, and thus, the consumer pays less for the supplied energy. Currently only for big consumers made energy supply “direct input” through the construction of an overhead line (OL with a nominal voltage of 110 kV or 220 kV. However, it is advisable to consider the issue of power supply efficiency of big and medium-sized industrial enterprises based on the “direct input”. The questions of voltage level study based on empirical formulas are considered in the article, expressing the dependence of the voltage from the transmission distance and the amount of transmitted power. It was proven that these formulas give a large spread, so intermediate voltage classes 35 kV and 110 kV, which compared with the traditional option of power supply on the basis of the cable line 10 kV, have been selected. Based on the technical and economic calculations it has been proved the value of the transmit power and length of the line at which the power supply of industrial enterprise on the basis of “ direct input” with a nominal voltage of 110 kV becomes effective.

  13. ANTITRUST REGULATION IN TERMS OF ENTERPRISE DEVELOPMENT CHLOR-ALKALI INDUSTRY

    Directory of Open Access Journals (Sweden)

    N. N. Grinyov

    2014-01-01

    Full Text Available The article reveals the problems of antitrust regulation activities of processing enterprises. The necessity of improving the activity of enforcement to prevent the emergence of monopolistic market structures chlor-alkali industry.

  14. The organizational fundamentals of innovation development management of agro-industrial enterprises

    Directory of Open Access Journals (Sweden)

    Ilona Yasnolob

    2017-05-01

    Full Text Available Modern prospects of innovation activities at agro-industrial enterprises and the conditions of innovation diffusion have been discussed. The main structure forming elements of organizing innovation activities have been characterized: personnel (people, ideas, funds, culture. The principles of organizing innovation activities at agro-industrial enterprises have been suggested. The functioning of these principles is provided by the project-matrix structure of the organization. It has been proven that the necessary conditions of effective organizing innovation activities at agro-industrial enterprises are: the distributing of roles and responsibilities; ensuring the effective distribution of information and flexibility of using resources; defining the responsibility for the made decisions. The practical importance of the investigation consists in developing concrete methodological foundations the using of which allows to raise the effectiveness of innovation activities at agro-industrial enterprises.

  15. Analysis of projects development of enterprises in engineering industries in Khmelnytskyi region

    OpenAIRE

    SHKODA M.S.

    2012-01-01

    This article analyzes the use of development projects in the engineering industry of Khmelnitsky region. The current state of engineering field. Solves warehouse development projects engineering enterprises and activities to enhance their implementation.

  16. Intrafirm planning and mathematical modeling of owner's equity in industrial enterprises

    Science.gov (United States)

    Ponomareva, S. V.; Zheleznova, I. V.

    2018-05-01

    The article aims to review the different approaches to intrafirm planning of owner's equity in industrial enterprises. Since charter capital, additional capital and reserve capital do not change in the process of enterprise activity, the main interest lies on the field of share repurchases from shareholders and retained earnings within the owner's equity of the enterprise. In order to study the effect of share repurchases on the activities of the enterprise, let us use such mathematical methods as event study and econometric modeling. This article describes the step-by-step algorithm of carrying out event study and justifies the choice of Logit model in econometric analysis. The article represents basic results of conducted regression analysis on the effect of share repurchases on the key financial indicators in industrial enterprises.

  17. Use of innovative control systems in maintenance of a sustainable development of the industrial enterprise

    Directory of Open Access Journals (Sweden)

    2013-10-01

    Full Text Available Instability of the economic environment causes of increase of adaptive characteristics of the enterprise that leads to introduction of the advanced innovative control systems. Innovative management assumes accumulation of the newest tools of the operation of business applied in world practice. The problem of the manager in this case consists in formation of such industrial system which will provide a sustainable development of the industrial enterprise in the long-term period.

  18. DETERMINATION OF INDUSTRIAL ENTERPRISE MANAGEMENT PRIORITY TASKS AND ASSESSMENT OF ITS CONDITION

    Directory of Open Access Journals (Sweden)

    A. A. Vartanyan

    2012-01-01

    Full Text Available This paper presents a new systematic approach to identifying main pyramid projections of business for main consumers of company’s products and services. Pyramid and matrix business concepts are introduced through which the consumers may assess the state of business of any industrial enterprise. Investigated in the article are factors and components of successful sales. Using the business matrix and pyramid, a new promising and consumer-directed approach to choosing the organization’s marketing activity directions is developed. The industrial enterprise component notion is defined along with the component’s main elements. A list of enterprise management and investment priority tasks is made.

  19. The Project Approach in Organization of Foreign Economic Activity as a Means of Increasing Competitiveness of Industrial Enterprise

    Directory of Open Access Journals (Sweden)

    Lazarenko Vladimir Ye.

    2017-12-01

    Full Text Available The article is aimed at studying the organization of foreign economic activity of industrial enterprise in case of introduction of project approach to its management. New conditions of doing business in terms of aircraft building enterprises, consisting in the transition to production according to international standards, require a modern approach to the solution of the range of issues. In conditions of limited internal financial resources of company and high expenses connected with entering the foreign market, it is extremely important to define the priority directions of foreign economic activity and the most optimal mechanisms of its organization and management. The functioning of the sphere of foreign economic activity of industrial enterprise in case of introduction of project approach to management has been analyzed. The essence, features and the main parameters of project approach as a means of increasing the competitiveness of enterprise have been defined. Priorities of the large-scale enterprise development strategy have been analyzed and suggested by means of carrying out the project method of organization of foreign economic activity.

  20. CAUSES OF CRISIS SITUATION IN UKRAINE SUGAR INDUSTRY ENTERPRISES AND THEIR SOLUTIONS

    Directory of Open Access Journals (Sweden)

    G. Fyliuk

    2014-04-01

    Full Text Available Current state and major trends of functioning of the sugar industry enterprises in Ukraine are characterized. The industry's place in the structure of social production in Ukraine is highlighted. The dynamics of the number of operating sugar factories and dynamics of production and consumption of sugar in Ukraine during recent years are displayed. The performance of the sugar factories is analyzed. Forecasted assessment of the of PEST- factors on the development of the sugar industry is shown. The basic entry barriers to the industry for new players are indicated. The description of major players in the sugar market is made. Level of concentration of sugar market in Ukraine is calculated and conclusions about its dynamics are made. Factors of crisis state of sugar industry enterprises in Ukraine are determined. Suggestions on implementation of priority measures aimed at improving the efficiency of industry's management in order to drive the enterprises out of the crisis are formulated.

  1. The Opportunity of International Manufacturing Organization for Lithuania's Large Furniture Enterprises

    Directory of Open Access Journals (Sweden)

    Tomas Baltuška

    2016-04-01

    Full Text Available This article analysis international manufacturing theory, current situation in Lithuania’s large furniture enterprises, opportunities for international manufacturing, the advantages of such strategy and the problems that comes along from introduction and imple-mentation of such strategy. The main purposes of this article are to analyze sector of furniture enterprises, examples of successful enterprises of international manufactures. Survey data is analyzed and the conclusions are formulated, which reflect the benefits of the system put in place by companies.

  2. MANAGEMENT OF GAS-AIR ENERGY INSTALLATION OF INDUSTRIAL ENTERPRISE

    Directory of Open Access Journals (Sweden)

    V. Y. Lobov

    2018-02-01

    Full Text Available Purpose. The goal of the work is to substantiate the issue of effective use of kinetic energy of gas-air flows used by the technological installation for generating electric power, which will allow developing a new control algorithm and creating new software for controlling the gas-air power plant. To test the adequacy of the developed control algorithms and software, to develop a laboratory gas-air power plant. Methodology. To investigate the distribution of air-gas mass in process plants used industrial plant simulation method performed in software SolidWorks Flow Simulation. The method of simulation allowed to develop a new control algorithm and create new software taking into account the basic technical requirements for the management of the gas-air power plant. To test the efficiency of the developed algorithms and control software for the gas-air power plant, a physical modeling method was used on a developed laboratory installation connected via a USB interface with a computer and has a virtual model of the SCADA system presented in the LabVIEW environment. Findings. Based on the modeling of gas-air flows on the developed mathematical model, the optimal ratios of pipeline sizes are rationally determined, the gas-air mixture costs necessary for the most efficient operation of the gas-air power plant, that is, in the working zone of the gas-air path, the generator screw contacts the most significant flows, providing the maximum effect rotation. The obtained results of research of gas-air flows of technological installations of an industrial enterprise in the software environment of SolidWorks Flow Simulation and on their basis the basic technical requirements for the management of a gas-air power plant are developed. An optimal control algorithm has been developed that enabled it to be introduced into the control scheme of a gas-air power plant with a microprocessor or a specialized microcontroller. Originality. New possibilities for

  3. Reliability theory for repair service organization simulation and increase of innovative attraction of industrial enterprises

    Science.gov (United States)

    Dolzhenkova, E. V.; Iurieva, L. V.

    2018-05-01

    The study presents the author's algorithm for the industrial enterprise repair service organization simulation based on the reliability theory, as well as the results of its application. The monitoring of the industrial enterprise repair service organization is proposed to perform on the basis of the enterprise's state indexes for the main resources (equipment, labour, finances, repair areas), which allows quantitative evaluation of the reliability level as a resulting summary rating of the said parameters and the ensuring of an appropriate level of the operation reliability of the serviced technical objects. Under the conditions of the tough competition, the following approach is advisable: the higher efficiency of production and a repair service itself, the higher the innovative attractiveness of an industrial enterprise. The results of the calculations show that in order to prevent inefficient losses of production and to reduce the repair costs, it is advisable to apply the reliability theory. The overall reliability rating calculated on the basis of the author's algorithm has low values. The processing of the statistical data forms the reliability characteristics for the different workshops and services of an industrial enterprise, which allows one to define the failure rates of the various units of equipment and to establish the reliability indexes necessary for the subsequent mathematical simulation. The proposed simulating algorithm contributes to an increase of the efficiency of the repair service organization and improvement of the innovative attraction of an industrial enterprise.

  4. Absorptive capacity: Relevancy for large and small enterprises

    Directory of Open Access Journals (Sweden)

    Joshua R. Ndiege

    2012-06-01

    Objective: The purpose of this article is thus to provide a review of the literature on this subject with the aim of finding out how both large and small enterprises stand to benefit from AC. We intend to affirm that, by successfully carrying out a learning process that is characterised by the exploration and exploitation of external knowledge and the organisation’s current knowledge base, organisations can realise competitive advantage irrespective of their size. Method: In the literature search, three approaches were employed, namely academic databases, online search engines and a review of references of related studies which led to more relevant articles and works whose references were further reviewed and analysed. Content analysis was done on all collected articles for quality appraisal and synthesis, the results of which we present as discussions on various sections of this paper leading to answering of our study objective. Only peer-reviewed articles were used. Results: Our findings reveal that, irrespective of the organisation’s size, it can benefit significantly from AC. The study further reveal that AC is a strong predictor of an organisation’s performance and hence a strategic asset for the organisation. Organisations with high AC are able to learn how to utilise new knowledge within their processes and come up with changes that improve their competitive advantage. Conclusion: We submit that, because AC is a strong predictor of an organisation’s performance, it is imperative that the necessary measures are taken to improve the levels of AC for all firms, irrespective of their size.

  5. The Development Potential in the System of Potentials of an Industrial Enterprise

    Directory of Open Access Journals (Sweden)

    Shpak Sergiy O.

    2018-03-01

    Full Text Available The aim of the article is to clarify the content and formulate a methodologically rigorous definition of the concept of enterprise development as a key category of management theory for restructuring industrial enterprises that provides the basis for a constructive definition of the concept of development potential and its place in the system of enterprise potentials. It is substantiated that the interpretation of the concept of enterprise development that is consistent with the philosophical concept of development should accumulate the concepts of competitiveness of an enterprise, as the ability to generate an acceptable profit on a long-term basis; the potential of an enterprise, as the ability to perform its basic activity characterizing the cumulative result of such activity, its marginal opportunities; the role of the structure of the enterprise as a system in the formation of its ultimate capabilities (potentials. It is shown that these requirements are met by the definition of the development process as a process of a purposeful transfer of the enterprise to a qualitatively new state described by broader opportunities for generating profits under the forecast conditions. At the same time, the structural adaptation of the enterprise to the new operating conditions is a tool for realizing the development process, which indicates the equivalence of the concepts of structural adaptability of an enterprise and its development potential. It is substantiated that the competitiveness of an enterprise is determined by its economic potential and development potential, which form the highest level of the hierarchy of potentials, the construction of which is possible in the course of decomposition of these potentials into their components according to the type of activity of the enterprise.

  6. Disintegration-wave method of recovery of industrial waste iron and steel industry enterprises

    Directory of Open Access Journals (Sweden)

    M. A. Vasechkin

    2016-01-01

    Full Text Available Rational use of raw materials and waste is one of the most important factors determining the effectiveness of any processing enterprise. Industrial wastes of mining and metallurgical industries are a valuable source of many elements. However, little activity of the mineral and inconsistent chemical and phase composition of the waste reduce their attractiveness for use as a secondary raw material, and the presence of heavy metals and water-soluble compounds is a serious environmental threat. Fractional excretion of elements that make up the slag can be carried out with the help of their recovery by disintegration-wave method. The paper presents a machine-hardware circuits for the implementation of recovery process of slag and disintegrator design. In conducting research on the example of slag samples of the enterprises in Stavropol and Krasnoyarsk territories, it was found out that the observed enrichment of slags on the composition of iron takes place, its physical and chemical activity increases and persists for a long period of time. These facts were noted in the study of the microstructure and the results of spectral analysis of the initial slags and subjected to recovery by disintegration-wave method. The results analysis led to the conclusion about the possibility of waste recovery of mining and metallurgical industries with by disintegration-wave method. Resulting in the processing materials with enhanced activity of the mineral part and certain chemical and phase composition, can be used as raw material for the production of metallurgical, cement and other industries.

  7. Preferential treatment in transition economy the case of state-owned enterprises in the textile and garment industry in Vietnam

    OpenAIRE

    Knutsen, Hege Merete; Nguyen, Cuong Manh

    2004-01-01

    The article examines the role and contribution of preferential treatment of state enterprises to growth in the textile and garment industry. State enterprises are still the largest single sector in the textile and garment industry in Vietnam, but are losing market shares to private Vietnamese enterprises and foreign-owned enterprises despite the benefits that they enjoy. However, in the present context of economic transition and keen competition in the global market, well-managed state enterp...

  8. Analysis of investment appeal of the industrial enterprise by eigenstate method

    Directory of Open Access Journals (Sweden)

    Buslaeva O.S.

    2017-01-01

    Full Text Available An analysis of enterprise performance is considered. The problem is solved based on the analysis of the base indicators of functioning of the enterprise in terms of improving economic stability, and also development of autoregulation mechanism of economical stability of enterprise. An eigenstate method is proposed for the analysis of the basic indicators of the enterprise as it allows to construct an economomical stability model of enterprise. Methodology of economic stability analysis of enterprise on the basis of eigenstate method is described. The formulas for calculating the complex indicator of economic stability are given. The effectiveness of the methodology is demonstrated on the example of economic stability analysis of the large trading company.

  9. Choosing the Direction of Development of Foreign Economic Activity for Enterprises in the Aviation Industry

    Directory of Open Access Journals (Sweden)

    Shtal Tetyana V.

    2017-11-01

    Full Text Available The article is aimed at studying the existing approaches to the development of foreign economic activity (FEA of enterprise, elaborating the procedure of its management in order to determine the direction of development of FEA of enterprises in the aviation industry of Ukraine. The authors have developed, formalized and visualized a phased mechanism of choosing the direction of development of FEA for enterprise, according to the method of functional modeling. The obtained instrument was used to determine the direction of FEA development for a typical enterprise in the aviation industry. Features of the aforementioned enterprise have been allocated, a suitable set of development directions has been selected, a reasoned procedure of implementation of activities on development of foreign economic activity at the enterprise has been analyzed and determined. Prospect for further research in this direction can be implementation of the mechanism at the enterprises of other industries, refinement of the instrumentarium for each stage of the process according to their features and needs.

  10. ERP in large Danish enterprises: Implications for SCM

    DEFF Research Database (Denmark)

    Møller, Charles

    2004-01-01

    This paper argues that with the present state of Enterprise Resource Planning (ERP) adoption by the companies, the potential benefits of Supply Chain Management (SCM) and integration is about to be unleashed. This paper presents the results and the implications of a survey on ERP adoption...... in the 500 largest Danish enterprises. The study is based on telephone interviews with ERP managers in 88.4% of the "top 500" enterprises in Denmark. Based on the survey, the paper suggests the following four propositions: (i) ERP has become the pervasive infrastructure; (ii) ERP has become a contemporary...... technology; (iii) ERP adoption has matured; and (iv) ERP adoption is converging towards a dominant design. Finally, the paper discusses the general implications of the surveyed state of practice on the SCM research challenges. Consequently we argue that research needs to adjust its conceptions of the ERP...

  11. Establishment of Multidisciplinary Methodology in the Modern Industrial Enterprise Management

    Directory of Open Access Journals (Sweden)

    Dergacheva Elena

    2016-01-01

    Full Text Available The concept of an enterprise as a socio-technical system meets a wide socio-economic approach in the management of the economic complex. In accordance with this approach, a company as a product of the society develops on the basis of socio-economic patterns, supported by scientific and technical solutions. And the surrounding nature evolves on the basis of natural biological laws that does not imply interwoven links of these processes. From the field of view of researchers and managers due to the activities of the company, the deep transformation of interconnected society and nature escapes through the use of advanced productive forces, the expansion of the artificial world as a whole. Social systems recreate the technical infrastructure of an enterprise and in the wider build artificial environment - the technosphere. It helps to accelerate the innovative development of the enterprise, and also leads to the interrelated transformations in a society, a person and nature. Therefore it is necessary to expand the narrow content of the broad multidisciplinary system approach with its interpretation, to include integrative technogenic socio-natural processes into the consideration of enterprise systems. This will allow preventing negative trends and in the future - coming over to the sustainable socio-natural development.

  12. The application of enterprise reference architecture in the financial industry

    NARCIS (Netherlands)

    Harmsen van der Beek - Hamer, ten W.; Trienekens, J.J.M.; Grefen, P.W.P.J.; Aier, S.

    2012-01-01

    Abstract. Financial institutions are facing enormous challenges in business / IT alignment. Enterprise architecture (EA) is seen as key in addressing these challenges. Major issues still exist in EA design and realization. The concept of reference architecture is explored as one of the elements that

  13. Essays on Innovation Ecosystems in the Enterprise Software Industry

    Science.gov (United States)

    Huang, Peng

    2010-01-01

    Innovation ecosystem strategy is often adopted by platform technology owners to seek complementary innovation from resources located outside the firm to exploit indirect network effect. In this dissertation I aim to address the issues that are related to the formation and business value of platform innovation ecosystems in the enterprise software…

  14. Application of analytic hierarchy process method in the evaluation of managers of industrial enterprises in Slovakia

    Directory of Open Access Journals (Sweden)

    Lukáš Jurík

    2015-10-01

    Full Text Available Evaluation of employees in industrial enterprises is a problem, because evaluators often make decisions based on subjective feelings. The objective approach is missing in the evaluation of employees. Objective approach during evaluation of employees can be achieved by applying the method of Analytic Hierarchy Process. We applied the method in the field of HR management in three enterprises in Slovakia. For the first time, we used the method in an enterprise in selection process of the position of HR worker, where on the basis of the criteria, we recommended the most suitable candidate for the enterprise. The second was the application of the method in the enterprise for evaluating managers, where the enterprise needed to identify qualitative differences between managers and then determine, in which fields the employees must improve. The third application was the creation of a methodology for evaluating the competencies of managers in enterprise. In the above-mentioned enterprise, there was defined a competency model, which served as a system of criteria for evaluation, and by the application of method, quality of managers was able to be expressed by the synthetic indicator.

  15. Absorptive capacity: Relevancy for large and small enterprises

    Directory of Open Access Journals (Sweden)

    Joshua R. Ndiege

    2012-06-01

    Full Text Available Background: Over the years, there has been a growing interest in organisational research inthe absorptive capacity (AC construct, but only a few theoretical and empirical studies onthis topic have been carried out over the last decade. However, a number of scholars andpractitioners have continued to cite AC as a significant factor in determining the success orfailure of organisations. With the dramatic changes in business environments, there has beena growing rise in the use of knowledge by organisations to help improve and maintain theircompetitiveness and consequently their survival. AC is a fundamental element that helpsorganisations to gain competitive advantage by producing commercial products or servicesthrough the transformation of knowledge.Objective: The purpose of this article is thus to provide a review of the literature on this subjectwith the aim of finding out how both large and small enterprises stand to benefit from AC. Weintend to affirm that, by successfully carrying out a learning process that is characterised by theexploration and exploitation of external knowledge and the organisation’s current knowledgebase, organisations can realise competitive advantage irrespective of their size.Method: In the literature search, three approaches were employed, namely academic databases,online search engines and a review of references of related studies which led to more relevantarticles and works whose references were further reviewed and analysed. Content analysiswas done on all collected articles for quality appraisal and synthesis, the results of which wepresent as discussions on various sections of this paper leading to answering of our studyobjective. Only peer-reviewed articles were used.Results: Our findings reveal that, irrespective of the organisation’s size, it can benefitsignificantly from AC. The study further reveal that AC is a strong predictor of an organisation’sperformance and hence a strategic asset for the

  16. RATIONAL RECOVERY MODEL OF DEPOT PROCESSING EQUIPMENT AT THE INDUSTRIAL ENTERPRISE

    Directory of Open Access Journals (Sweden)

    M. I. Kapitsa

    2014-07-01

    Full Text Available Purpose. The problem of the maximum resources recovery of rolling stock repair depot of industrial enterprise with limited resources consumption, which are used in the system is today’s topical question.The main factors that affect the repair depot operation of industrial enterprise are reviewed. The most significant factors, affecting the quality of the repair depot, are emphasized for further study, specifically - the state of the major repair equipment of a sector. There is a need to minimize the impact of the unsatisfactory state of this factor. Methodology. The formed task of major equipment rational repairing in the mathematical sense is based on the solution of a vector optimization problem. In this case the target functions are the monetary funds spending and time expenditure for repairing. Findings. The mathematical model of optimal equipment maintainability of the repair department at the industrial enterprise was developed by the authors. On the example the choice model of optimal path for equipment repairing of enterprise repair department is described. Originality. As a result of the conducted research the repairing system of major equipment of industrial enterprise sectors was improved. As the mathematical model of rational system recovery of industrial enterprise repair depot we recommend apparatus of class problems of vector optimization. Practical value. Using the proposed model of major equipment repair system of the repair depot at the industrial enterprise will improve the quality of the department by increasing the efficiency of primary resources - time and monetary funds - which are spent by the sector in order to repair its techniques.

  17. Financial capital appraisal in the system of industrial enterprise development management

    OpenAIRE

    Akhtyamov M.K.; Gonchar E.A.

    2017-01-01

    The paper studies an objective appraisal of financial capital value in industrial enterprise development management. The authors draw attention to a limited scope of work in the area of financial management under application of a traditional approach to appraisal of enterprise financial capital value and describe a new advanced approach to this problem solving. The paper focuses on reformation of balance sheet statement, in which economic benefit and reserves of financial capital are included...

  18. Kaizen Costing: Experience and Prospects of Implementation at Industrial Enterprises of Ukraine

    OpenAIRE

    Kachalay Valeriy V.

    2013-01-01

    The article focuses on a necessity to apply effective methods of cost accounting of products for gaining competitive advantages by the Ukrainian industrial enterprises in the world market of goods and services. It describes the essence of the kaizen costing as a process of continuous and gradual improvement and also identifies factors, which de-stimulate rapid propagation of these methods of cost accounting at domestic enterprises. It provides experience of its implementation at the Ukrainian...

  19. IMPROVING MARKETING LOGISTICS MANAGEMENT OF ENTERPRISES OF AGRO-INDUSTRIAL COMPLEX

    OpenAIRE

    Raisa Bilovol; Alina Chaikina

    2016-01-01

    The Purpose of the paper is to prove the need of improving marketing logistics management at enterprises of agro-industrial complex with the use of balanced scorecard method that will allow objectively evaluate its effectiveness. Methodology. The survey is based on the use of general scientific research methods, methods of analysis and synthesis, method of abstraction. Results. Research of state sales of agricultural products in agrarian enterprises helped us to identify and organize the foll...

  20. ENSURING STRATEGIC STABILITY OF INDUSTRIAL ENTERPRISES IN RUSSIA BASED ON PRODUCTION EFFICIENCY

    Directory of Open Access Journals (Sweden)

    N. V. Lyasnikov

    2010-01-01

    Full Text Available World economic crisis conditions demand that strategic stability of real sector industry enterprises be provided for. Basic approaches to determination of economic essence of such concepts as stability and competitiveness are discussed. On the basis of the author’s approach, the above economic categories are treated as two equivalent concepts active for short time periods, the approach testifying that stability of an enterprise is the time-spread competitiveness.

  1. OPTIMIZATION OF EXPORT PORTFOLIO CURRENCY STRUCTURE OF INDUSTRIAL ENTERPRISES IN REPUBLIC OF BELARUS

    Directory of Open Access Journals (Sweden)

    K. A. Коrоbiyna

    2009-01-01

    Full Text Available Optimization of currency portfolio structure of export industrial enterprises in the Republic of Belarus, by which we shall understand a currency structure of export contracts of an international enterprise, is considered as one of the most important problems in the financial management of an enterprise. Statement and analysis of industrial enterprise alternative costs and simultaneous investigation of tendencies pertaining to changes in the exchange rates give the possibility (under other equal status to reduce non-systematic risks in foreign trade. Diversification of industrial enterprise currency portfolios with the purpose to decrease financial risks and with due account of exchange rate correlation can lead to an increase of payments in Russian currency and Eurocurrency under enterprise export contracts. The given changes decrease currency risks in the foreign trade however they entail possible increase of the export share of products to the Russian Federation in total export volume of the Republic of Belarus that increases dependence of the Republic of Belarus on the Russian Federation as the main foreign trade partner.

  2. Development of algorithm for depreciation costs allocation in dynamic input-output industrial enterprise model

    Directory of Open Access Journals (Sweden)

    Keller Alevtina

    2017-01-01

    Full Text Available The article considers the issue of allocation of depreciation costs in the dynamic inputoutput model of an industrial enterprise. Accounting the depreciation costs in such a model improves the policy of fixed assets management. It is particularly relevant to develop the algorithm for the allocation of depreciation costs in the construction of dynamic input-output model of an industrial enterprise, since such enterprises have a significant amount of fixed assets. Implementation of terms of the adequacy of such an algorithm itself allows: evaluating the appropriateness of investments in fixed assets, studying the final financial results of an industrial enterprise, depending on management decisions in the depreciation policy. It is necessary to note that the model in question for the enterprise is always degenerate. It is caused by the presence of zero rows in the matrix of capital expenditures by lines of structural elements unable to generate fixed assets (part of the service units, households, corporate consumers. The paper presents the algorithm for the allocation of depreciation costs for the model. This algorithm was developed by the authors and served as the basis for further development of the flowchart for subsequent implementation with use of software. The construction of such algorithm and its use for dynamic input-output models of industrial enterprises is actualized by international acceptance of the effectiveness of the use of input-output models for national and regional economic systems. This is what allows us to consider that the solutions discussed in the article are of interest to economists of various industrial enterprises.

  3. Institutional Analysis of Knowledge Generation Resource Potential at the Enterprises of Regional Military-Industrial Complex

    Directory of Open Access Journals (Sweden)

    Evgeny Vasilyevich Popov

    2016-09-01

    Full Text Available The article is devoted to the processes of knowledge generation at the enterprises of military-industrial complex, which are the leaders of the regional innovative activity. The target of the research is to develop the methodology based on the use of resource application potential for increasing the efficiency of knowledge generation at the instrument-making enterprises of military-industrial complex. The system analysis of the knowledge generation processes is conducted at one of them. It allows to draw a conclusion that such enterprises have a lack of the institutes of knowledge generation processes. The authors are offered a technique of the development of the knowledge generation system at the military-industrial enterprises based on the accounting of assets and opportunities of the enterprise in the realization of intellectual activity. The developed technique is based on the determination of the horizontal resource potential of knowledge generation and allows to determine the potential of resource application at each stage of product life cycle. The comparison of the actual and theoretical values of horizontal resource potential allows to correct the distribution of a share of each of resources within a stage, and therefore, to optimize the realization of tasks at a specific stage. The offered tools were implemented in 2015 at one of the regional military-Industrial enterprises. The methodological tools of the research include the methods of expert assessment, mathematical statistics and the institutional analysis. On the basis of the offered technique and received empirical results, the institutional spiral of knowledge generation during the filling of state order at the military-industrial enterprise is developed. Its implementation will promote the decrease in the level of uncertainty during the whole life cycle of innovative activity product. The developed institutional spiral of knowledge generation at instrument-making military-industrial

  4. PROSPECTS OF APPLICATION OF THE CONCEPTOF QUICK RESPONSE MANUFACTURING AT THE RUSSIAN INDUSTRIAL ENTERPRISES

    Directory of Open Access Journals (Sweden)

    Ch. V. Shipilova

    2016-01-01

    Full Text Available This article is devoted to research of such concept of the organization of production, as Quick Response Manufacturing or Quick-response production, at the center which, time of implementation of the order is put. Today domestic producers are compelled to function in new conditions, competing with a great number of players of the global market, as a result the emphasis on timely implementation of orders and a tendency of reduction of time of production will allow to reach competitive advantages. Fundamental aspects of Quick Response Manufacturing within functioning of the enterprise of branch are considered, and also the essential lack of this concept is revealed.The purpose / objectives. The purpose of article is research of the economic contents of the concept of the organization of production Quick Response Manufacturing and area of its use at the modern industrial enterprises. Article tasks: to investigate economic contents of the concept of Quick Response Manufacturing, to reveal its features and scopes in the modern industry.Methods. A methodical basis of this article are comparative methods of the analysis.Results. The economic contents of the concept of Quick Response Manufacturing are investigated. Four main key aspects which are the cornerstone of this concept are investigated: time force, organizational structure of the enterprise, system dynamics and possibilities of its application in scales of all enterprise. Components of positive work of system dynamics of the industrial enterprise are revealed, the trend of critical process of production is built. Considering that modern conditions demand from the enterprises to react, adapt quickly for the changing conditions, the factor of time plays an important role. Therefore the concept of QRM has rather perspective character, focusing attention on time of implementation of the order, in that communication that this parameter is one of key both for the enterprise, and for increase of its

  5. ENERGY RECOVERY FOR CONTINUOUS DYEING PROCESS IN TEXTILE INDUSTRY ENTERPRISES

    Directory of Open Access Journals (Sweden)

    V. N. Romaniuk

    2015-01-01

    Full Text Available The paper ascertains and presents alteration in the energy consumption as a consequence of utilizing the low-temperature waste streams commonly used in the lines of continuous dyeing at the finishing shops of textile enterprises of Belarus. The utilization realizes through the engagement of lithium-bromide absorption heat pumps with various energy characteristics such as the heating coefficient (relative conversion ratio COPhp = 1,15; 1,7; 2,2 and the heating capacity. The latter associates with the converted heat-flow energy utilization variant with the heat-transfer medium heating system scheme (one-, twoand multistage heating. The article considers transition to previously not applied service-water preheating due to the technological acceptance of feeding higher temperature water into the dyeing machine and widening specification of the heattransfer media. The authors adduce variants of internal and external energy use and their evaluation based on the relative energy and exergy characteristics. With results of the thermodynamic analysis of the modernized production effectiveness the researchers prove that alongside with traditional and apparent interior utilization of the energy associated with the stream heat recuperation, it is advisable to widen the range of applied heat-transfer media. The transition to the service water twoand multi-stage preheating is feasible. The study shows that the existing energy supply efficiency extremely low index-numbers improve by one or two degrees. Since they are conditioned, inter alia, by the machinery design, traditional approach to energy supply and heat-medium usage as well as the enterprise whole heating system answering requirements of the bygone era of cheap energy resources. The authors examine the continuous dyeing line modernization options intending considerable investments. Preliminary economic assessment of such inevitable modernization options for the enterprise entire heat-and-power system

  6. The Formation of Instruments of Management of Industrial Enterprises According to the Theoretical and Functional Approaches

    Directory of Open Access Journals (Sweden)

    Raiko Diana V.

    2018-03-01

    Full Text Available The article is aimed at the substantiation based on the analysis of the company theories of the basic theoretical provisions on the formation of industrial enterprise management instruments. The article determines that the subject of research in theories is enterprise, the object is the process of management of potential according to the forms of business organization and technology of partnership relations, the goal is high financial results, stabilization of the activity, and social responsibility. The publication carries out an analysis of enterprise theories on the determining of its essence as a socio-economic system in the following directions: technical preparation of production, economic theory and law, theory of systems, marketing-management. As a result of the research, the general set of functions has been identified – the socio-economic functions of enterprise by groups: information-legal, production, marketing-management, social responsibility. When building management instruments, it is suggested to take into consideration the direct and inverse relationships of enterprise at all levels of management – micro, meso and macro. On this ground, the authors have developed provisions on formation of instruments of management of industrial enterprises according to two approaches – theoretical and functional.

  7. PROBLEMS AND POTENTIAL OF DEVELOPMENT OF THE INDUSTRIAL ENTERPRISES OF THE KNOWLEDGE-INTENSIVE BRANCHES

    Directory of Open Access Journals (Sweden)

    Mikhail Yakovlevich Veselovsky

    2016-01-01

    Full Text Available In the article the problems of enterprise development high-tech industries, analyzes the factors that complicate the processes of knowledge-intensive production management. It provided a number of problems that make it difficult to increase the economic efficiency of high-tech industry. To solve the above problems need to increase the investment program and the economic attractiveness of high-tech industries that is to be developed, modern management system, carried out the reform of the knowledge-based industry to provide high levels of efficiency of new organizational structures in the current economic conditions compared to the existing, outdated forms. The purpose / goal. The aim of this study is to analyze the causes that affect the development potential of knowledge-based industries and enterprises identify problems that impede improving the economic efficiency of the Russian high-tech industry. Purpose: To identify the problems that are most difficult to improve the economic efficiency of the Russian high-tech industry; consider the high-tech industry; examine the reasons for the reform of the knowledge-based industry; explore the level of innovation activity of organizations of high-tech industries. Methodology. The methodological and theoretical basis of the study are the works, monographs, research papers, studies of Soviet authors on the development of knowledge-intensive industries, materials of State Statistics. We used scientific methods of research, such as the comparative method of analysis, synthesis, analysis and synthesis. Results. Given the concept of the domestic high-tech complex (NEC, defined the environment in which businesses operate NEC. The features of these companies, where there is the presence of a strong innovation potential. The requirements for knowledge-intensive production as the backbone of a new stage of the development lifecycle. A number of problems hampering the development and transformation of enterprise

  8. Analysis of the environmental and economic indicators of the industrial enterprise

    Science.gov (United States)

    Mikhailov, V. G.; Kiseleva, T. V.

    2018-05-01

    In the paper the features of the analysis of the environmental and economic indicators of the industrial enterprise are considered. The purpose of the study is to improve the system of environmental and economic analysis at the enterprise for more accurate forecasting of its main environmental and economic indicators. The study of the main approaches to the implementation of environmental and economic analysis based on the corresponding systems of indicators with identification of the most significant factors was carried out. The main result of the study is the choice of a system for analyzing the environmental and economic indicators, maximally oriented to a specific enterprise, taking into account its production specific features. The practical significance of the study consists in the selection of an adequate system of indicators at enterprises to improve the effectiveness from preparation of an environmentally safe management decision.

  9. Effective Tools for Conflict Resolution in Multicultural Teams in Industrial Enterprises

    Science.gov (United States)

    Videnová, Veronika; Beluský, Martin; Cagáňová, Dagmar; Čambál, Miloš

    2012-12-01

    The aim of this paper is to highlight the issue of resolving conflicts within multicultural teams in industrial enterprises. The authors build upon the concept of multiculturalism which seeks for possible ways to enable different cultures to coexist and the means of communication between them. In the introduction, the authors explain the importance of increased attention and interest in the area of multiculturalism. Industrial enterprises nowadays are increasingly aware of this issue as they become more open to different cultures and they are confronted with intensive international migration and previously isolated societies become more pluralistic. As a result of these processes, individuals are more frequently in contact with members of different cultures.

  10. SIMULATION OF STRATEGIC SOLUTIONS ON FINANCIAL AND ECONOMIC PROVISION OF RUSSIAN DEFENCE INDUSTRY COMPLEX ENTERPRISES

    Directory of Open Access Journals (Sweden)

    K. B. Dobrova

    2011-01-01

    Full Text Available Creation of tools making it possible to efficiently control financial and production capability of industrial corporations making part of the Russian military-industrial complex are discussed for aviation enterprises as an example. A system of balanced indicators is proposed to be used to develop corporation’s adaptive management strategies. The enterprise production activity financial optimization task is solved on the basis of specific cost optimization criteria by means of linear programming. Economic mathematical models are proposed to optimize the scopes andtime terms of financing to be attracted over the planning intervals.

  11. THE CONCEPT OF ENTERPRISE COMPETITIVENESS AND THE MAIN FACTORS FOR ITS PROVISION IN CONSTRUCTION INDUSTRY

    Directory of Open Access Journals (Sweden)

    Potapova Irina Ivanovna

    2018-01-01

    Full Text Available Competitiveness of construction enterprises is the most important characteristic of the enterprise activity, which every business entity must constantly evaluate and undertake various kinds of measures to increase it. The development and implementation of these activities should be carried out with a clear understanding of the content of the enterprise competitiveness, and also by forming and analyzing the list of factors that affect the competitiveness. Subject: competitiveness of construction industry enterprises. Research objectives: reflecting the content of the notion of enterprise competitiveness and the main factors of its provision in the construction industry. Materials and methods: in the process of research, we applied the principles of ascent from abstract to specific, the unity of logical analysis, systematization, structuring and generalization. In the process of writing the paper, we used research and educational literature, articles in periodicals, Internet sources. Results: it is proposed to adhere to an integrated approach, according to which the competitiveness of an enterprise should be understood as the ability of an enterprise to conduct activities in the market, outrunning competitors, effectively using its own internal capabilities and taking into account environmental factors, paying attention to market conditions, features of regional development, characteristics of the industry, and at the same time, making sufficient profit that allows the enterprise to increase its potential. It is important to note that the factors of ensuring the competitiveness of the enterprise are mostly divided into external and internal ones, which, of course, is suitable for construction companies because they are open systems influenced by factors of the external and internal environment. The conducted analysis of the external factors allowed us to divide them into four groups: world-class factors, macro-level factors, meso-level factors and

  12. RESEARCH ON INVESTMENT APPEAL AND COMPETITIVE CAPACITY OF INDUSTRIAL ENTERPRISES OF UKRAINE

    Directory of Open Access Journals (Sweden)

    Olena Khadzhynova

    2017-12-01

    Full Text Available The purpose of the research is an elaboration of theoretical, methodological, and methodical approaches to forming and developing competitive capacity and investment appeal of steel industry enterprises. The achievement of the given purpose has led to the necessity of formulating such scientific research concept, which bottom line is in the relevance of using modern management methods implemented in foreign manufacturing practices. These are innovative economic, technical, organizational, and corporate methods of managing enterprises with the help of developed systems of managing strategic changes in enterprise activities, the steel industry in particular, which will contribute to achieving the high level of effectiveness and competitiveness of domestic business units. The research methodology is based on the combination of theories of managing economic systems in the globalized market economy. The empirical base for the research consists of the works by domestic and foreign scientists on problems of formation and development of strategic change management systems at industrial enterprises, statistical records, companies’ public records in the Internet, data of international information agencies, Ukrainian legislation on regulating economic activity of enterprises. In carrying out the research, such methods were used as: general academic analysis and synthesis, systemic generalization, statistic and correlation analysis (when justifying the directions of development before carrying out the economic analysis of activities of metallurgical enterprises. There is a conclusion that the industry is concentrated and, consequently, long-term trends are quite predictable, but they require additional clarifications, taking into consideration the uncertainty in the modern state of world economy. It is determined that metallurgy development depends on GBP. The analysis shows that the countries with the high GDP level have quite developed metallurgy. One

  13. THE MAIN APPROACHES TO THE DEFINITION OF ECONOMIC EFFICIENCY OF ENTERPRISES OF CONSTRUCTION INDUSTRY

    Directory of Open Access Journals (Sweden)

    A. V. Dolgova

    2015-01-01

    Full Text Available The problem of ambiguous interpretation of the category of "efficiency". Taking into account the fact that economic efficiency is quite complex and multifaceted category, coupled with the economic laws and applies to all activities of the enterprise this figure is one of the essential characteristics of the processes occurring in industrial organizations. The lack of a generally accepted view among domestic and foreign economists regarding the essential part of the index of efficiency of activity of the industrial enterprise leads to the impossibility of its use for the management of processes. In the conditions of market economy, the task of economic evaluation res ults of the economic entity remains an important element of the research aspects of the company. Each new refinement of recorded knowledge acts as a stimulus for the development of fundamental knowledge categories. One of the Central in the system of economic categories, in our opinion, is indicated for the effective functioning of the enterprise." Precise formulation of the conceptual framework, criteria-based composition have important theoretical value to justify the subject of any research conducted in the conditions of modern economic development of the global space. The definition of criteria and performance indicators, as well as developing sound economic policies of improving the economic mechanism of enterprise depend on a comprehensive study of the essence of economic efficiency of industrial enterprises of the industry. The article examines the main approaches to the definition of economic efficiency, as well as identify the degree of relation of the category of "efficiency" with other economic categories. The author suggested that the characteristics of the essence of economic efficiency, adequate to the task of functioning and development of enterprises in the construction industry.

  14. The Methodical Aspects of Material Stimulation in the Motivation System at Enterprises of Electricity Industry

    Directory of Open Access Journals (Sweden)

    Kostіn Dmytro Yu.

    2017-09-01

    Full Text Available The article improves the methodical aspects of estimating material stimulation at enterprises of electricity industry. It has been determined that the provided taxonomy coefficients synthetically characterize changes in the values of attributes of the groups studied. Their most important advantage is that, in the course of analysis, we can now use only one indicator, which characterizes the direction and scope of changes in the processes described by the set of arbitrary numbers of incoming attributes. The level of material stimulation in the motivation system of enterprises of electricity in 2012–2015 was researched. It has been noted that during the outlined period there has been a general trend towards an increase in the integral indicator. This results from the economic crisis occurrences and the lack of a well-functioning organizational and economic mechanism for managing the motivation system at enterprises of this industry branch. The integrated assessment of enterprises extends the economic essence of the concept of material stimulation in the motivation system at enterprises of electricity industry, allowing it to be used to characterize the enterprise’s ability to return to its equilibrium status, preserve the parameters and move to a new stage of development in the conditions of accidental changes in the external and internal environment.

  15. METHODOLOGICAL ISSUES OF MODELING OF THE EFFICIENCY OF LABOR IN THE RUSSIAN DEFENSE INDUSTRY ENTERPRISES

    Directory of Open Access Journals (Sweden)

    Sokolov A. V.

    2016-12-01

    Full Text Available The article highlights main factors affecting productivity of enterprises in the defense industry. With the elimination of a number of factors, we determined functional dependence form between the change in productivity (at the company level in comparison to the industry average and relative wages (at the company level in comparison to the industry average taking into account regional fac tor. It is shown that dependence is of exponential character and is marked by inelasticity of productivity with respect to wages. This means that the growth of employees’ wages in comparison to average levels for the industry to which the enterprise belongs, as well as average levels for the federal subject in which the enterprise is located, leads to workforce productivity increase, however, the rate of increase slows down with further wage growth. Levels of wage growth (in relation to industry averages adjusted for regional factor maximizing enterprises’ target values are determined with specific features of such enterprises (manufacturing of both military and civilian products taken into account.

  16. Organizational-economic mechanism of management of food industry enterprises competitiveness

    Directory of Open Access Journals (Sweden)

    O.A. Gorb

    2016-09-01

    Full Text Available The article is devoted to the discussion of the peculiarities of the formation of organizational-economic mechanism of food industry enterprise management. Brief characteristics of social-economic environment of functioning the enterprises of the industry have been given for determining its desirable parameters. The characteristics of challenges to the competitive positions of Ukrainian enterprises in the connection with the country's entry to the “free trade” zone with the European Union have also been given. The authors consider the solving of the touched upon problem in the combination of competitiveness management functions and preventive anti-crisis management in the single mechanism. The structure of such mechanism has been suggested, and the characteristics of its components have been given.

  17. Factor analysis of processes of corporate culture formation at industrial enterprises of Ukraine

    Directory of Open Access Journals (Sweden)

    Illiashenko Sergii

    2016-06-01

    Full Text Available Authors have analyzed and synthesized the features of formation and development of the corporate culture at industrial enterprises of Ukraine and on this basis developed recommendations for application in the management of strategic development. During the research authors used the following general scientific methods: at research of patterns of interaction national culture, corporate culture and the culture of the individual authors used logical generalization method; for determining factors influencing corporate culture formation with the level of occurrence authors used factor analysis; for trend analysis of the corporate culture development at appropriate levels authors used comparative method. Results of the analysis showed that macro- and microfactors are external and mezofaktors (adaptability of business and corporate governance, corporate ethics, corporate social responsibility and personnel policies, corporate finance are internal for an enterprise. Authors have identified areas for each of the factors, itemized obstacles to the establishment and development of corporate culture at Ukrainian industrial enterprises and proposed recommendations for these processes management.

  18. CONTINUOUS IMPROVEMENT PRACTICE IN LARGE ENTERPRISES: STUDY RESULTS

    Directory of Open Access Journals (Sweden)

    Dorota Stadnicka

    2015-03-01

    Full Text Available Continuous improvement is indispensable for ensuring the company's development and its survival on the constantly changing global market. Continuous improvement is particularly important in the quality and production management systems. A company should deliver a product compliant with a client's requirements in a specified time and at an appropriate price. That is why, continuous improvement refers to different areas of an organization's functioning and it is an integral part of Lean Manufacturing. This article presents the results of the study conducted in production enterprises on a limited area. The aim of the study was the assessment of the implementation of continuous improvement in Lean Manufacturing, and, in particular, employees' involvement in the problem identification and in reporting improvements as well as the way of motivating employees to involve themselves. The authors also tried to identify the factors influencing the elements of a continuous improvement system.

  19. Energy efficiency improving opportunities in a large Chinese shoe-making enterprise

    International Nuclear Information System (INIS)

    Ming Yang

    2010-01-01

    Energy consumption and energy intensity reduction opportunities are quite different from one enterprise to another. It is necessary to understand how much energy is used at individual enterprise, where the most energy is consumed and what the best opportunities are to invest in energy efficiency. Auditing energy efficiency was recently undertaken in one of the top 1000 largest Chinese enterprises. The objectives of this paper are to fill a gap in the literature of auditing energy efficiency for a Chinese manufacturing enterprise and to share the audited energy efficiency results. This paper concludes that if the enterprise invests USD 1.9 million to improve energy efficiency, the investment will be recovered in about 18 months. The net present value of the investment would be about USD 9.8 million at a discount rate of 12%. The investment will reduce a large amount of energy consumption at the enterprise based on its figures in 2008, including 15% of electricity, 40% of fuel oil, and 54% of diesel. Carbon reduction is also very cost-effective. Investment of one dollar in the enterprise will help cut carbon emission by 7.95 kg per year and generate $5.3 net revenue in the economic lifetime of the invested technology.

  20. Features of energy efficiency benchmarking implementation as tools of DSTU ISO 50001: 2014 for Ukrainian industrial enterprises

    Directory of Open Access Journals (Sweden)

    Анастасія Юріївна Данілкова

    2015-12-01

    Full Text Available Essence, types and stages of energy efficiency benchmarking in the industrial enterprises are considered. Features, advantages, disadvantages and limitations on the use are defined and underlying problems that could affect the successful conduct of energy efficiency benchmarking to Ukrainian industrial enterprises are specified. Energy efficiency benchmarking as tools to the national standard of DSTU ISO 50001: 2014 is proposed

  1. ASSESSMENT OF EFFICIENCY OF INVESTMENTS INTO THE ENTERPRISES OF DEFENSE INDUSTRY COMPLEX

    Directory of Open Access Journals (Sweden)

    S. Sitnikov

    2016-01-01

    Full Text Available Currently, the foreign arms market dramatically increases competition among manufacturers. Countries such as China and India began to produce some types of weapons that deserve the attention of a potential consumer countries. To execute an order of the President of the Russian Federation "not to lose position in the global market and to supply the Russian army with weapons of the next generation" it is necessary to introduce into production a new technology. The specifi city of enterprises of the military-industrial complex, one cannot expect help in this direction from abroad. It is therefore necessary to rely on their own strength. But, unfortunately, we are currently producing new technologies practically are not engaged. One of the reasons is the lack of modern production facilities.Actively developing the process of the revival of the defence and scientifi c-technological sphere requires the development of fundamentally new models of functioning of enterprises of the military-industrial complex, market-based relationships between government and business. One of the Central problems of defence building is the development and introduction into the daily operations of criteria (indicators related to the performance of weapons systems in General and each of its subsystems separately, with the costs of maintaining an adequate level of defensibility of the country, and the correlation of this level with the cost, because this shows the effi ciency of the system and its separate links.Annotation. The article investigates the process of innovative development programs for enterprises of the military-industrial complex, which is associated with the necessity of taking into account a signifi cant portion of specifi c factors and indicators that diff erentiate these businesses from the main mass of industrial enterprises.The goal / task. The main purpose of the presentation of material in this article is to analyze the indicators (criteria of

  2. А construction of management of enterprises charges is in chemical industry

    OpenAIRE

    Gura, N.; Radchenko, K.

    2010-01-01

    In the article the essence and value of conception of "administrative account" are defined, the debatable questions of constructing of administrative account and its structure are considered. The methods of charge accounting are considered at the enterprises of chemical industry. The essence of introduction and usage of modern information technologies are stated.

  3. ANALYSIS OF THE EXTERNAL FACTORS OF INFLUENCE ON INNOVATION ACTIVITY OF AN INDUSTRIAL ENTERPRISE

    Directory of Open Access Journals (Sweden)

    I. A. Salikov

    2014-01-01

    Full Text Available Summary. For successful functioning and development of the enterprise is a need to strive as possible deeper and more dynamic influence on parameters and objects OK-environmental management, primarily due to increase their innovation activity. Innovative activity of enterprises influenced by many factors. They can be classified on the factors of direct influence (micro and factors of indirect impacts (macro. Factors of direct impact of the influence on the pace and scale of development of the enterprise, on its effectiveness, because the whole spectrum of these factors acts as a limiter. Macro factors create the General conditions of existence of the enterprise in the external environment. To analyses these factors approach was used to SNW-analysis. As a result of analysis, factors of micro and macro-were classified on: stimulating, it minesweepers and dissuasive. Also studied were the degree of influence of these factors on the innovative activity of the enterprise. Reviewed rating factors hindering the development of innovation activity of industrial enterprise in Russia. In the result of which identified factors that hinder the development of innovative activity, and justified in the direction of overcoming them. It should be noted that the distinction between enabling and constraining factors is rather thin and conditional. So, the factors initially restraining innovation, at a certain point can be transformed into a stimulus for its development. Accounting for these factors, creation of necessary conditions and introduction of innovations in various aspects of the functioning of industrial enterprises will allow them to provide competitor-term benefits and sustainable development in a rapidly changing environment and the external environment.

  4. ECONOMIC AND THEORETICAL ASPECTS OF PLANNING EFFECTIVE ACTIVITY OF ENTERPRISES IN THE COAL INDUSTRIES

    Directory of Open Access Journals (Sweden)

    Zh. K. Galiev

    2018-03-01

    Full Text Available Relevance and purpose of the study. Under modern conditions, the share of loss-making enterprises of the coal industry is still high. This brings the solution of the problem of improving the efficiency of their activities up to date. It also determines the purpose of this research. Research methods: scientific generalization, system and factor analysis, and statistical modeling are used in the present work. Results. The article discusses the economic and theoretical aspects of planning the effective activities in the coal industry. The paper analyzes the elasticity of the unit cost price in terms of its labor productivity. It also deals with the elasticity of the volume of output in terms of labor productivity. This indicates that the existing coal mining technologies have, to some extent, exhausted their advantages in the coal industry. They require a change on the achieved level of the capital-labor ratio. It is recommended to strive to ensure advanced ratio of growth of labor productivity of workers compared to the growth rate of unit costs. This should be done at the introduction of a new technology at the enterprises of the coal industry. The advanced ratio of growth in output compared to the growth rate of labor productivity of workers should also be guaranteed. The early growth rate of revenue from sales compared to the growth rate in total costs of production should be provided. The advanced ratio of profit growth compared to the growth rate of revenue from sales has to be provided as well. It is proven that for coal industry enterprises the type of competitive advantages called “the lowest costs” can be the only acceptable one in comparison with other types. We have considered the requirements to the new developed technologies for coal mining. They are as follows: the value of marginal profit in the planned period should be more than the fixed costs of the enterprise; the value of marginal profit in the planned period should be more

  5. INNOVATIVE RESERVES OF LABOR PRODUCTIVITY IMPROVE IN NATIONAL ENTERPRISES OF SUGAR INDUSTRY

    Directory of Open Access Journals (Sweden)

    T. Kostenko

    2015-06-01

    Full Text Available Overcoming the innovative inertia and effective use of innovative reserves of labor productivity increase in domestic sugar factories is an important step towards the revival of strategically important sector for Ukraine’s economy and the key to its future development in the long run. The aim of the article is to search and study of innovative reserves of labor productivity increase in domestic enterprises of sugar industry. The international experience of innovation implementing in sugar industry enterprises is studied. The paper proves that management innovation is innovative reserves of labor productivity improve in the domestic sugar enterprises. The study analyzes overall trends of innovation development and dynamics of labor productivity in the sugar factories of Ukraine during the period of 2003-2013. The benefits and risks of laboratory tests of sugar beets and sugar are overviewed for the optimal technological mode of production installation on terms of outsourcing. The necessity and economic effectiveness of laboratory research outsourcing is proved to create the optimal technological mode of sugar production. It will improve labor productivity and quality of sugar, increase production and develop new profitable activities of sugar industry enterprises.

  6. Clothing industry: development problems, regional dislocation and modern management technologies for small enterprises

    Directory of Open Access Journals (Sweden)

    I. Hristoforova

    2015-01-01

    Full Text Available This article discusses issues related to the problems of development of light industry in the territory of the former Soviet Union, systematize industry regions and analyzes modern management technologies used by small businesses garment industry. The aim of the article is the analysis of the organizational and economic aspects of light industry on the example of clothing companies. The objectives of the article: to sistematize the major regions of the dislocation of light industry: textile, footwear, clothing; to characterize the current state of the apparel industry enterprises; to show the value of small clothing companies; to study the need for the introduction of flexible manufacturing systems (FMS on small sewing factories; to analyze the range of the scientific development of national universities in the study of flexible manufacturing systems and give them a brief description.Methodology. The methodological basis of the paper is the following scientific methods: deduction, comparative and group analysis, desk research. The Results. The result of the study is to identify the main issues and trends in the development of light industry, ordering the placement of the industry in the territory of the former Soviet Union, the definition of the most popular management techniques used in small businesses garment industry.Conclusions / significance. The above article analyzes the development of light industry has allowed to identify the main trends and formulate problems for the enterprises. New conditions require the development of small enterprises and the introduction of modern technologies in production processes and management.

  7. Innovation and productivity: empirical evidence for Brazilian industrial enterprises

    Directory of Open Access Journals (Sweden)

    Luciana Carvalho

    Full Text Available Abstract The aim of this paper is to carry out an empirical investigation into the relationship between innovation and the productive performance of Brazilian businesses measured by Work Productivity and Total Factor Productivity. Data taken from the Research of Innovation and estimated cross section models and panel data was used. The results suggest that innovation produces an incipient impact on competition in the national industry, reflected in the small magnitude of coefficients associated with the diverse indicators of innovation.

  8. Leadership styles and managerial culture at industrial enterprises with different modernization and innovation processes

    Directory of Open Access Journals (Sweden)

    Glukhov Sergei

    2017-01-01

    Full Text Available The article presents the results of an empirical research into the transformational leadership and managerial culture at industrial enterprises with different modernization and innovation processes. The authors suggest the criteria for differentiation of options of making changes at the industrial companies: the attitude to their own research base, the focus on introduction of innovations, the investment potential for the introduction of innovations, contacts with research and educational agencies, presence of institutional innovation structures in the structure. It was found out that the managerial profile of an industrial enterprise, focused on innovation activities, involves the index of transformational leadership and the managerial culture with a subject-oriented management, i.e. democratic, which is manifested in the commitment to the group decision making process; humanizing, which is manifested in the attitude towards the employees as being independently valuable regardless the context of achieving organizational results; and innovative, which is manifested in the constant quest for changes.

  9. The Specific Features of design and process engineering in branch of industrial enterprise

    Science.gov (United States)

    Sosedko, V. V.; Yanishevskaya, A. G.

    2017-06-01

    Production output of industrial enterprise is organized in debugged working mechanisms at each stage of product’s life cycle from initial design documentation to product and finishing it with utilization. The topic of article is mathematical model of the system design and process engineering in branch of the industrial enterprise, statistical processing of estimated implementation results of developed mathematical model in branch, and demonstration of advantages at application at this enterprise. During the creation of model a data flow about driving of information, orders, details and modules in branch of enterprise groups of divisions were classified. Proceeding from the analysis of divisions activity, a data flow, details and documents the state graph of design and process engineering was constructed, transitions were described and coefficients are appropriated. To each condition of system of the constructed state graph the corresponding limiting state probabilities were defined, and also Kolmogorov’s equations are worked out. When integration of sets of equations of Kolmogorov the state probability of system activity the specified divisions and production as function of time in each instant is defined. On the basis of developed mathematical model of uniform system of designing and process engineering and manufacture, and a state graph by authors statistical processing the application of mathematical model results was carried out, and also advantage at application at this enterprise is shown. Researches on studying of loading services probability of branch and third-party contractors (the orders received from branch within a month) were conducted. The developed mathematical model of system design and process engineering and manufacture can be applied to definition of activity state probability of divisions and manufacture as function of time in each instant that will allow to keep account of loading of performance of work in branches of the enterprise.

  10. Innovation Level of Sustainable Practices Adopted in Industrial Enterprises

    Directory of Open Access Journals (Sweden)

    Simone Sehnem

    2016-07-01

    Full Text Available This research aimed to identify the level of innovation of sustainable practices by industrial companies. This is a descriptive study that made use of a questionnaire answered by 50 industrial companies. The results show that environmental practices at full level by 68% of businesses are monitoring the risks and opportunities for the organization's activities due to climate change; 56% of companies surveyed are waste separation; followed by the realization of related health and safety training at work in 52% of cases surveyed; and 48% monitoring and recording of injuries, the injury rate, the rate of occupational diseases, lost days, absenteeism and number of work-related fatalities for all workers. Among the practices adopted not stand out incineration (burning mass (80% of companies surveyed; hiring indigenous and tribal employees (68%; composting (64% and use of surface water in the process. Therefore, the study contributed to the disclosure cleaner called production innovations and also pipe end technologies. Some social practices that signal a commitment of the organizations with human resources and the humanization and also economical focused on continuous improvement.

  11. Design of Concept of Sustainable Marketing Communication Strategy for a Ideal Industrial Enterprise and Practical Applications of this Concept

    Science.gov (United States)

    Šujaková, Monika; Golejová, Simona; Sakál, Peter

    2017-09-01

    In the contribution the authors deal with the design and use of a sustainable marketing communication strategy of an ideal industrial enterprise in the Slovak Republic. The concept of an ideal enterprise is designed to increase the enterprise's sustainable competitiveness through the formation of a corporate image. In the framework of the research, the practical application of the draft concept was realized through a semi-structured interview in the form of propositional logic.

  12. Financial capital appraisal in the system of industrial enterprise development management

    Directory of Open Access Journals (Sweden)

    Akhtyamov M.K.

    2017-01-01

    Full Text Available The paper studies an objective appraisal of financial capital value in industrial enterprise development management. The authors draw attention to a limited scope of work in the area of financial management under application of a traditional approach to appraisal of enterprise financial capital value and describe a new advanced approach to this problem solving. The paper focuses on reformation of balance sheet statement, in which economic benefit and reserves of financial capital are included by the authors; the author’s methodology for appraisal of financial capital value and its application sphere are denoted. In accordance with a case study, we confirm possibility of more accurate appraisal of enterprise investment opportunities by taking into account economic benefit from reserve of liquidity and borrowing capacity, which increases financial capital value. The practical approval results affirm that application of proprietary methodology for appraisal of financial capital and its elements has practical utility in solving problems of determination of required amount of attracted foreign investments and problems of determination of fair value of company take of an external investor, which are aimed at minimizing risks of corporate ownership dissemination and improving managerial efficiency of an industrial enterprise.

  13. IMPROVING MARKETING LOGISTICS MANAGEMENT OF ENTERPRISES OF AGRO-INDUSTRIAL COMPLEX

    Directory of Open Access Journals (Sweden)

    Raisa Bilovol

    2016-11-01

    Full Text Available The Purpose of the paper is to prove the need of improving marketing logistics management at enterprises of agro-industrial complex with the use of balanced scorecard method that will allow objectively evaluate its effectiveness. Methodology. The survey is based on the use of general scientific research methods, methods of analysis and synthesis, method of abstraction. Results. Research of state sales of agricultural products in agrarian enterprises helped us to identify and organize the following disadvantages: intermediary structures that are engaged in marketing of agricultural products significantly increase their costs that excess in 2-4 times the original price of agricultural products; inadequacy of agricultural market infrastructure and lack of wholesale and retail markets for agricultural products; low level of development of information electronic communications; backwardness of transport infrastructure and poor quality of roads, particularly in rural areas; high level of physical and moral deterioration of transport; low level of development of industrial and technological base of agricultural enterprises warehousing. Practical implications. We systemized and proposed indicators of evaluation of marketing logistics at enterprises of the agro-industrial complex based on the Balanced Scorecard in key areas: financial and cost-effectiveness indicators; indicators of internal logistics business processes; quality and development staff; indicators in the direction of working with clients. To the financial indicators and indicators of economic efficiency we included such as sales per 1 employer at marketing department (Qs/employer, proportion of logistics cost of marketing in the total cost of the enterprise (%, coefficient of the implementation of marketing plan (Cm, ROI in logistics marketing (%, profitability of marketing channels (%. Internal logistics business processes in enterprises of the agro-industrial complex represented by such

  14. The Formation of the System of Innovation Management of Development of Enterprises of Hotel-Restaurant Industry

    Directory of Open Access Journals (Sweden)

    Davydova Oksana Yu.

    2017-11-01

    Full Text Available The article is aimed at elaborating a methodical approach to the formation of the system of innovation management of development of enterprises of hotel-restaurant industry. The main problems of the domestic enterprises of hotel-restaurant industry were considered. An analysis of economic essence of the concepts of: «system», «innovations», «management», «development» was carried out and the interrelation between them was determined. The decomposition analysis of the concept of «innovation management of development of enterprises» has been proposed and it has been defined that for the efficient functioning of enterprises of hotel-restaurant industry in conditions of rigid market competition it would be necessary to implement the system of innovation management of enterprise development, the essence of which is formation of a process, aimed at increasing competitiveness, individuality, adaptability, awareness, improvement, cognition, quality, and other characteristics.

  15. Employment and other selected personnel attributes in metallurgical and industrial enterprises of different size - research results

    Directory of Open Access Journals (Sweden)

    A. Pawliczek

    2015-10-01

    Full Text Available The presented paper deals with the issue of employment and other selected personnel attributes as employees’ affiliations, employees’ benefits, monitoring of employees’ satisfaction, monitoring of work productivity, investments into employees education and obstacles in hiring qualified human resources. The characteristics are benchmarked on the background of enterprise size based on the employees count in the year 2013. The relevant data were collected in Czech industrial enterprises, including metallurgical companies, with the help of university questionnaire research in order to induce synergy effect arising from mutual communication of academy-students-industry. The most important results are presented later in the paper, complemented with discussion based on relevant professional literature sources. The findings suggest that bigger companies check productivity and satisfaction and dismiss employees more frequently, unlike medium companies which do not reduce their workforce and solve the impact of crisis by decreased affiliations, reduced benefits and similar savings.

  16. [IMPLEMENTATION OF MEASURES FOR OCCUPATIONAL HYGIENE AT ENTERPRISES OF BREWING INDUSTRY].

    Science.gov (United States)

    Agafonov, G V; Novikova, L V; Chusova, A E

    2015-01-01

    In the paper there are considered the legal basics of the occupational hygiene of brewing production: acts, bylaws and normative legal acts. There are characterized types of supervision and control (state, departmental, public) implementing the abidance of the sanitary legislation at the enterprises of the brewing industry. There are presented sanitary and hygienic requirements to the enterprises of the brewing industry. There are designated measures of occupational hygiene of brewing production: a sink, cleaning--removal of various pollutions, and also disinfection--process of the decline in quantity of microorganisms to safe level. There are considered some characteristics of pollutions which are subject to removal at various stages ofproduction of beer and stages of sanitary processing of brewing systems according to chemical properties of substances.

  17. Using the Communication Methods, Tools and Support During Management of Project Communication in Industrial Manufacturing Enterprises

    Science.gov (United States)

    Samáková, Jana; Babčanová, Dagmar; Hrablikchovanová, Henrieta; Mesárošová, Jana; Šujanová, Jana

    2017-09-01

    Effective communication is the most significant ability for project manager and successful project. However, during the management of projects communication, it is very often forgotten, often overlooked or taken for granted. In the management of projects, it is principally necessary to deal with communication during all project lifecycle. Within the project communication, it is very important to define the main methods, tools, support of communication and frequency of communication; these belong to the most important elements of the communication channel which is very often forgotten. Therefore, the main aim of the paper is to analyse the utilisation of the communication channel: communication methods, communication tools, communication frequency and to support project communication in industrial manufacturing enterprises in Slovakia. Based on the research, we can conclude that communication channel is not adequately elaborated in international methodologies and standards of project management as well as in industrial manufacturing enterprises. These facts are very negative, conclusion and it is therefore necessary to deal with the problem.

  18. Lack of skilled personnel as threat to HR security of industrial enterprises

    Directory of Open Access Journals (Sweden)

    Ozernikova Tatiana

    2017-01-01

    Full Text Available The article assesses the needs of Russian industrial enterprises for skilled labor. The authors consider deficiency in qualified personnel as a threat to the human resources security of industrial enterprises, and analyze its causes. The study includes the criteria to distinguish highly skilled employees in the labor force (education level, occupation, correspondence of performed work to education, and analysis of the dynamics of their number. It identifies the internal and external factors that have a significant influence on the number of qualified personnel. The external factors include the size of the salary, population growth due to migration, the regional level of the socio-economic development. The applied methods of analysis are single-factor analysis of variance (F-test, multiple regression and descriptive statistics. The analysis is based on the materials of the Russian Federal State Statistics Service, as well as on the Russian Longitudinal Monitoring Survey - Higher School of Economics.

  19. Forming the corporate strategy of cost management of an industrial enterprise

    OpenAIRE

    Timur Vladimirovich Kramin; Irina Viktorovna Mirgaleyeva

    2015-01-01

    Objective to develop and substantiate one of the mechanisms of corporate strategy formation of an industrial enterprise cost management. Methods institutional cost and systemic approaches. Results in the article the classification of corporate strategies is elaborated in the framework of the cost management system. In accordance with the structure of the cost management system the classification of corporate strategy is used which is universal from the point of view of cost...

  20. Crisis Management in the Business: A Case Study on Turkish Footwear Manufacturing Industry Enterprises

    OpenAIRE

    Mehmet Karahan; Ömür Hakan Kuzu

    2011-01-01

    This study attempts to examine about crisis management in Turkish footwear industry enterprises. Business is affected by the crisis in different degrees. This situation is actually related to the skills of crisis management of the business faced with crisis. The feature and process of the crisis differs from each one. Therefore reaching a common conclusion about the causes and consequences of the crises is impossible. In addition, the crisis in the past and global crisis in the recent years r...

  1. OPTIMIZING THE DESIGN OF THE SYSTEMS OF INFORMATION PROTECTION IN AUTOMATED INFORMATIONAL SYSTEMS OF INDUSTRIAL ENTERPRISES

    Directory of Open Access Journals (Sweden)

    I. E. L'vovich

    2014-01-01

    Full Text Available Summary. Now to increase of indicators of efficiency and operability of difficult systems apply an automation equipment. The increasing role of information which became universal goods for relationship between various structures is noted. The question of its protection becomes the most actual. Special value is allocated for optimum design at creation of systems of the protection, allowing with the greatest probability to choose the best decisions on a set of alternatives. Now it becomes actual for the majority of the industrial enterprises as correctly designed and introduced system of protection will be pledge of successful functioning and competitiveness of all organization. Stages of works on creation of an information security system of the industrial enterprise are presented. The attention is focused on one of the most important approaches to realization of optimum design – multialternative optimization. In article the structure of creation of system of protection from the point of view of various models is considered, each of which gives an idea of features of design of system as a whole. The special attention is paid to a problem of creation of an information security system as it has the most difficult structure. Tasks for processes of automation of each of design stages of system of information security of the industrial enterprises are designated. Idea of each of stages of works is given at design of system of protection that allows to understand in the best way internal structure of creation of system of protection. Therefore, it is given the chance of evident submission of necessary requirements to creation of a reliable complex of information security of the industrial enterprise. Thereby it is given the chance of leveling of risks at early design stages of systems of protection, the organization and definition of necessary types of hardware-software complexes for future system.

  2. THE DEVELOPMENT OF ENVIRONMENTAL MANAGEMENT SYSTEMS ON THE URALS INDUSTRIAL ENTERPRISES

    Directory of Open Access Journals (Sweden)

    L.A. Mochalova

    2008-12-01

    Full Text Available The article presents the results of analysis of introduction and development of environmental management systems on the Urals enterprises by mining and smelting industry which was conducted by questioning of their representatives. Object of the research were showing up of positive and negative features in construction of corporative environmental management systems according to recommendations of standards ISO 14000 and comparison of our and foreign experience.

  3. Prospects and opportunities the implementation of effective management models at the enterprises of the Russian industry

    OpenAIRE

    E. S. Balashova; E. A. Gromova

    2016-01-01

    In 2015 the recession of the Russian economy continues. Economic forecasts of 2016 made by influential rating agencies and the International Monetary Fund are analyzed. It is emphasized that the course of structural economic changes, selected by the Russian government actualizes the issue of increasing the competitiveness of Russian industry on a global level that, in turn, contributes to the implementation of effective management models at the enterprises and organization of internal process...

  4. QUANTIFICATION OF THE DECISIONS OF CONTROL AND AUDIT IN INVENTORY MANAGEMENT IN CEMENT INDUSTRY ENTERPRISES

    OpenAIRE

    Sylwia £êgowik-Œwi¹cik

    2011-01-01

    Inventory management in enterprises of cement industry necessitates the assessment of the level of risk which is generated by production inventory. The processes of control and auditing allow for planning, monitoring and organization of inventory management in the analysed business entities. This paper is aimed at presentation of the phase of preparation of audit activities in the area of inventory and verification of model solutions for the processes of control and audit in terms of inventor...

  5. EFFICIENCY OF FIRE-FIGHTING PROTECTION OBJECTS IN PROVISION OF FIRE SAFETY AT INDUSTRIAL ENTERPRISES

    OpenAIRE

    A. V. Zhovna

    2008-01-01

    The paper gives an analysis of economic results pertaining to organization of a system for fire-fighting protection of industrial enterprises in theRepublicofBelarus. Statistical data on operational conditions of technical means of fire-fighting protection, particularly, automatic systems for detection and extinguishing of fires, systems of internal fire-fighting water-supply.  Requirements and provisions  of normative and technical documents are thoroughly studied. Observance of these docume...

  6. [The systemic approach to the health protection in the workers of industrial enterprises].

    Science.gov (United States)

    Oransky, I E; Razumov, A N; Fedorov, A A

    This paper presents the results of the systemic approach to the protection of health and prophylaxis of disability in the workers of industrial enterprises. The leading role in the technologies of rehabilitation (both short-term and long-term one) is played by the natural and physical therapeutic factors. The priority in the implementation of the therapeutic and health-promoting measures is given to the treatment based on the spa and health resort facilities as well as the factory health centers.

  7. Evaluating the Level of the Export-Import Potential of Industrial Enterprises: Methodical Support

    Directory of Open Access Journals (Sweden)

    Otenko Vasyl I.

    2017-04-01

    Full Text Available The article provides a detailed description of the methodical support for evaluating the level of development and use of the export-import potential of industrial enterprises. The place of evaluation in the system of management of the enterprise’s export-import potential (EIPE, as well as its conceptual content have been defined. An implementation of the proposed methodical support for evaluation of the EIPE has been displayed on the example of the major industrial enterprises of the city of Kharkiv. It has been substantiated that the objectivity and effectiveness of evaluation of the level of export-import potential of industrial enterprises is methodically ensured by: the system of partial indicators allowing for regular monitoring and diagnosing tendencies in the status and the use of the EIPE; the analytical tool – i.e. cluster, factor, and canonical analyzes to identify causal relationships in the components of potential and to determine the indicators of impact; the development and use of the EIPE, as well as the evaluation procedure itself, which is recommended for implementation in accordance with the appropriate stages.

  8. THE ROLE OF LOGISTICS IN ENTERPRISE RESTRUCTURING IN THE AUTOMOBILE INDUSTRY

    Directory of Open Access Journals (Sweden)

    F. A. Sabadash

    2016-01-01

    Full Text Available Formation of a market management mechanism in the Russian economy objectively requires strengthening the role of logistics in general and in the restructuring of the automotive industry in Russia in particular. In the article the main reasons that caused such an interest in the analysis is the automotive industry.Methodology. The methodological basis of this article are comparative, economic and statistical analysis methods.The purpose of this article is to reveal the key theoretical and practical issues of the role of logistics in the restructuring of the automotive industry companies, taking into account global transformations occurring in the world economy. This has allowed to specify the main issues associated with the use of logistics in the restructuring of the automotive industry in Russia.Conclusions. The following conclusions were obtained: research in the field of restructuring of the automotive industry enterprises are considered in the most general terms as "any changes to the strategic nature of the enterprise"; The second approach – the authors in their definitions focus on the restructuring of its individual aspects – goals, directions and forms of restructuring.

  9. Determination of Components of Investment Attractiveness of Enterprises and Industries as Factors of their Security

    Directory of Open Access Journals (Sweden)

    Mishchuk Ievgeniia V.

    2017-03-01

    Full Text Available The article considers the following factors of investment attractiveness of both enterprises and industry: the stage of the life cycle, absence of crisis, reputation. It is justified that the key industries for the Ukrainian economy in the context of improving economic security are mining and metallurgical industry and shipbuilding. The specificity of Zhiglyar cycles for the world steel industry and the actual periodicity of these cycles for the industry are revealed, as well as the interrelationship of their periodicity with that of the K-cycle phases. It is substantiated that for the mining and metallurgical complex there typical generally accepted time frames of Zhiglyar cycles of 6-13 years, which are associated with investing in fixed assets, building-up and loading production capacities. Smaller cycles are found at the level of local markets of individual countries. It is shown that the cycles of Kitchin characterize the volumes of consumption of crude steel in Ukraine. Diagnostics of the crisis of the enterprises under investigation is carried out. It is offered to evaluate the crisis on the basis of the ratio of the actual value of the indicator and its reference value. A scale for diagnosing the severity of the crisis is developed. It is shown that under crisis conditions a part of fixed assets remains unused. To resolve the issue of the need for measures on their elimination or sale, it is proposed to determine the rate of fixed assets utilization. It is estimated that its normative value should not be lower than 0.75. A methodical approach to evaluating the enterprise reputation is proposed. It is shown that internal and external reputations differ in the method of their evaluation. A scale for determining the severity of the reputational crisis is developed.

  10. [Mortality among able-bodied population in industrial cities in accordance with specific enterprise forming a company city].

    Science.gov (United States)

    Tikhonova, G I; Gorchakova, T Iu; Churanova, A N

    2013-01-01

    The article covers comparative analysis of mortality causes and levels among male able-bodied population in small and medium industrial cities of Murmansk region in accordance with specific enterprise forming a company city. Findings are that, if compared to Murmansk having no enterprise forming a company, other industrial cities in the region, situated in the same climate area, demonstrated higher levels of mortality among the male able-bodied population with the death causes associated etiologically to occupational hazards on the enterprises forming a company city.

  11. A carbon risk prediction model for Chinese heavy-polluting industrial enterprises based on support vector machine

    International Nuclear Information System (INIS)

    Zhou, Zhifang; Xiao, Tian; Chen, Xiaohong; Wang, Chang

    2016-01-01

    Chinese heavy-polluting industrial enterprises, especially petrochemical or chemical industry, labeled low carbon efficiency and high emission load, are facing the tremendous pressure of emission reduction under the background of global shortage of energy supply and constrain of carbon emission. However, due to the limited amount of theoretic and practical research in this field, problems like lacking prediction indicators or models, and the quantified standard of carbon risk remain unsolved. In this paper, the connotation of carbon risk and an assessment index system for Chinese heavy-polluting industrial enterprises (eg. coal enterprise, petrochemical enterprises, chemical enterprises et al.) based on support vector machine are presented. By using several heavy-polluting industrial enterprises’ related data, SVM model is trained to predict the carbon risk level of a specific enterprise, which allows the enterprise to identify and manage its carbon risks. The result shows that this method can predict enterprise’s carbon risk level in an efficient, accurate way with high practical application and generalization value.

  12. The Russian oil industry re-structuration: towards the emergence of western type enterprises?

    Energy Technology Data Exchange (ETDEWEB)

    Locatelli, C

    1999-01-01

    The Russian oil industry has undergone fundamental changes since the collapse of the Soviet Empire and its bureaucratic administrative structure, dominated by its various Branch Ministries. The monopoly in the Soviet oil industry has now been replaced by a number of ''oil companies'', some of which are very powerful, the best known of them being Lukoil. These ''joint stock companies'' are the product of a reform aimed essentially at implanting, out of all the numerous organisational arrangements developed in the West, the model of the vertically integrated private firm. Beyond the legal reforms in the Russian oil industry sector, however, the nature of the organisational model that has actually emerged in Russia begs several questions. Many entities, which are complex and highly diversified, are involved in this industry. There are, of course, the many private structures in which the banks sometimes carry a considerable amount of weight. There are also some vertically integrated organisations, but the degree of integration is variable and their method of centralization is based on a specific form of economic logic. It should not be considered, however, that these actors are similar to capitalist-type private enterprises, whose behaviour is regulated by the demands of international competition. Reform of property rights has not been sufficient to create true private enterprise in Russia. (author)

  13. The Russian oil industry re-structuration: towards the emergence of western type enterprises?

    International Nuclear Information System (INIS)

    Locatelli, C.

    1999-01-01

    The Russian oil industry has undergone fundamental changes since the collapse of the Soviet Empire and its bureaucratic administrative structure, dominated by its various Branch Ministries. The monopoly in the Soviet oil industry has now been replaced by a number of ''oil companies'', some of which are very powerful, the best known of them being Lukoil. These ''joint stock companies'' are the product of a reform aimed essentially at implanting, out of all the numerous organisational arrangements developed in the West, the model of the vertically integrated private firm. Beyond the legal reforms in the Russian oil industry sector, however, the nature of the organisational model that has actually emerged in Russia begs several questions. Many entities, which are complex and highly diversified, are involved in this industry. There are, of course, the many private structures in which the banks sometimes carry a considerable amount of weight. There are also some vertically integrated organisations, but the degree of integration is variable and their method of centralization is based on a specific form of economic logic. It should not be considered, however, that these actors are similar to capitalist-type private enterprises, whose behaviour is regulated by the demands of international competition. Reform of property rights has not been sufficient to create true private enterprise in Russia. (author)

  14. Algorithm of choosing type of mechanical assembly production of instrument making enterprises of Industry 4.0

    Science.gov (United States)

    Zakoldaev, D. A.; Shukalov, A. V.; Zharinov, I. O.; Zharinov, O. O.

    2018-05-01

    The task of the algorithm of choosing the type of mechanical assembly production of instrument making enterprises of Industry 4.0 is being studied. There is a comparison of two project algorithms for Industry 3.0 and Industry 4.0. The algorithm of choosing the type of mechanical assembly production of instrument making enterprises of Industry 4.0 is based on the technological route analysis of the manufacturing process in a company equipped with cyber and physical systems. This algorithm may give some project solutions selected from the primary part or the auxiliary one of the production. The algorithm decisive rules are based on the optimal criterion.

  15. The Key Principles of Process Manager Motivation in Production and Administration Processes in an Industrial Enterprise

    Directory of Open Access Journals (Sweden)

    Chromjakova Felicita

    2016-03-01

    Full Text Available The basic premise of sustainable development is that companies should completely re-evaluate their enterprise work logic and process organization. Most of the necessary changes concern employee stimulation and motivation. If we are truly interested in improving business results and the effectiveness of business processes – there would be no progress otherwise – we have to strive to break down the barriers between company management (leadership and employees in order to establish effective relationships between firms and customers. This paper presents research results of process manager activities in modern industrial enterprises, connected with a methodology proposal for the systematically-oriented process manager motivation of employees in accordance with the increased competitiveness of production and administration processes. It also presents an effective methodology of how to increase the positive effects of welldefined employee motivations from the process manager´s perspective. The core benefit of this methodology lies in the design of a systematic approach to the motivation process from the process manager side, allowing for radical performance improvement via production and administrative processes and the increased competitiveness of enterprise processes.

  16. The challenge of reducing energy consumption of the Top-1000 largest industrial enterprises in China

    International Nuclear Information System (INIS)

    Price, Lynn; Wang Xuejun; Yun Jiang

    2010-01-01

    In 2005, the Chinese government announced an ambitious goal of reducing energy consumption per unit of gross domestic product (GDP) by 20% between 2005 and 2010. One of the key initiatives for realizing this goal is the Top-1000 Energy-Consuming Enterprises program. The energy consumption of these 1000 enterprises accounted for 33% of national and 47% of industrial energy usage in 2004. Under the Top-1000 program, 2010 energy consumption targets were determined for each enterprise. The objective of this article is to evaluate the program design and initial results, given limited information and data, to understand the possible implications of its success in terms of energy and carbon dioxide emission reductions and to recommend future program modifications based on international experience with similar target-setting agreement programs. Even though the Top-1000 program was designed and implemented rapidly, it appears that - depending upon the GDP growth rate - it could contribute to somewhere between approximately 10% and 25% of the savings required to support China's efforts to meet a 20% reduction in energy use per unit of GDP by 2010.

  17. Industrial Physics Careers: A Large Company Perspective

    Science.gov (United States)

    Zollner, Stefan

    2009-03-01

    Statistical data from the American Institute of Physics and the National Science Foundation show that only about a third of physics graduates get permanent jobs in academia. A few work in government labs and hospitals. The majority of physics Ph.D.s, however, find employment in the private sector (industry). This trend has been increasing, i.e., recent Ph.D.s are even more likely to start careers in industry. Industrial physicists work in small, medium or large companies in a broad range of fields, including aerospace, semiconductors, automotive, energy, information technology, contract research, medical, chemical, optics, etc. They are also represented in fields outside of physics, such as finance. Even the ``inventor'' of the Powerball lottery game is a Ph.D. physicist. In my talk, I will describe pathways to success for an industrial physicist, from the perspective of employment in three different large corporations. Based on the NIST Baldridge criteria of Performance Excellence, I will discuss how to achieve and measure organizational success through focus on products and customers. Individual performance is linked to the goals of the organization. Performance has two components: Goals and behaviors. Both are key to success as an individual contributor or manager.[4pt] References: [0pt] http://www.aip.org/statistics/trends/emptrends.html [0pt] http://www.aps.org/about/governance/committees/commemb/index.cfm [0pt] http://www.quality.nist.gov/

  18. POWER EFFICIENCY OPPORTUNITIES FOR INDUSTRIAL REFRIGERATION SYSTEM OF FOOD PROCESSING ENTERPRISE

    Directory of Open Access Journals (Sweden)

    O. Ostapenko

    2016-12-01

    Full Text Available Rising prices on power supply are forcing business owners to search the ways of operating costs reducing. Refrigeration system in the food industry is a major source of power consumption. The utilization of cold accumulation systems allows reducing of refrigeration unit power consumption. In this paper the refrigeration system with a system of cold accumulation and dry cooling tower is considered. The possibility of power consumption reducing due to the organization of the enterprise refrigeration system operation process in the night period according to electricity multiple tariffs has been analyzed.

  19. Import dependence of industrial enterprises in the region as an economic security hazard

    Directory of Open Access Journals (Sweden)

    A. N. Makarov

    2010-12-01

    Full Text Available Import is traditionally considered as a source for saturation of a home market with scarce commodities or goods non-manufactured in an importing country. However, the larger is the share of import in the total volume of deliveries, the greater is the hazard for economic security of the region and for the state upon the whole. The analysis has revealed the fact that in the regional industry there is a real situation of absolute import dependence. It means that enterprises have been functioning only based on import deliveries to manufacture some single components for products of production-technical purposes.

  20. The Impact of Servitization Strategy on Relational Capital and Relational Performance: Evidences from China's Industrial Enterprises

    Institute of Scientific and Technical Information of China (English)

    SONG Hua; ZHANG Song-bo

    2014-01-01

    By identifying the characteristics of services management and the levels of specialty resources,the servitization strategy in the service supply chain management can be defined as the following three types,i.e.the business process oriented services,the technique application oriented services and the system integrated or packaged services.At the same time,it is found based on an empirical study of the data of China's enterprises that these strategies have different impact on relational capital and relational performance of the customers with different types of size.For large-scale enterprises,the business process oriented services and the technique application oriented services are significant factors impacting their relational capital and relational performance,while for SMEs,their relational capital and relational performance are impacted more by the technique application oriented services and the system integrated and packaged services.

  1. Innovation in small and medium sized enterprises (SMEs) in the Malaysian information technology (IT) industry

    International Nuclear Information System (INIS)

    Fatimah Mohd Amin

    2001-01-01

    The aim of this study is to examine innovative activities in small and medium enterprises (SMEs) in the Malaysian information technology (IT) industry. This study addresses three research questions: 1. What is the innovation pattern among SMEs in the Malaysian IT industry? 2. How significant is interactive learning between SMEs in the Malaysian IT industry and other agents in the innovation system? and 3. What is the role of the government in promoting innovation among SMEs in the Malaysian IT industry? Two approaches were taken to collect data for this study, that is, mail survey and face-to-face interviews. Based on findings from this study, the SMEs in the Malaysian IT industry were divided into four categories, namely, highly innovative, innovative, inventive, and non innovative. The patterns of knowledge acquisition and interactive learning vary among the different categories of firms, and on the whole, vertical linkages with suppliers were found to be the most significant. Finally, support through the provision of funding was considered to be among the most important roles of the government in promoting innovation in SMEs in the Malaysian IT industry. (author)

  2. Application of food safety management systems (ISO 22000/HACCP) in the Turkish poultry industry: a comparison based on enterprise size.

    Science.gov (United States)

    Kök, M Samil

    2009-10-01

    The objectives of this study were to determine the extent of food safety management systems (ISO 22000/HACCP) implementation in the Turkish poultry industry. A survey was conducted with 25 major poultry meat producers, which account for close to 90% of national production, and a comparison was made between the procedures of small-to-medium enterprises (SMEs) and large firms (LFs). The survey revealed that there is a high level of application of ISO 22000 (72%), which is seen to aid the export market. LFs were shown to adopt more stringent schemes and make better use of governmental support services than SMEs. LFs were also more aware of, and able to deal with, risks from a greater range of contaminants.

  3. Viral Management as a New Type of Enterprise Management in Coal Industry

    Science.gov (United States)

    Garafonova, Olga; Grigashkina, Svetlana; Zhosan, Anna

    2017-11-01

    The article considers the evolution of the concept of "management". The Internet analysis of the concept of "viral management" was conducted, the results of which testify to the positive trend, the growing interest in scientific circles, the relevance of the chosen direction for further research and the increasing popularity of the viral management among business leaders. The indices of coal and brown coal extraction in Ukraine and Russia for 2010-2016 are analyzed. Among the problems that exist in the coal industry are the following: mine assets have a high degree of deterioration; the equipment is rather obsolete and does not correspond to the world level; among the existing face equipment, the specific weight of longwall mining equipment, road headers, loading machines, and belt conveyors of the new generation is only several percent. Five steps of introduction of the virus management at the enterprise are identified: opening, development, participation, diffusion, sustainability. The principles of introduction of the viral management in the enterprises of the coal industry are offered. It is established that the main idea of the viral management is to "infect" the organization and, mainly, employees with one or another "virus" in the form of a common idea or goal. It is indicated that the viral management assumes a certain automaticity of changes, internal "obsession" with this or other innovation, involvement of an informal personal factor.

  4. Viral Management as a New Type of Enterprise Management in Coal Industry

    Directory of Open Access Journals (Sweden)

    Garafonova Olga

    2017-01-01

    Full Text Available The article considers the evolution of the concept of “management”. The Internet analysis of the concept of “viral management” was conducted, the results of which testify to the positive trend, the growing interest in scientific circles, the relevance of the chosen direction for further research and the increasing popularity of the viral management among business leaders. The indices of coal and brown coal extraction in Ukraine and Russia for 2010-2016 are analyzed. Among the problems that exist in the coal industry are the following: mine assets have a high degree of deterioration; the equipment is rather obsolete and does not correspond to the world level; among the existing face equipment, the specific weight of longwall mining equipment, road headers, loading machines, and belt conveyors of the new generation is only several percent. Five steps of introduction of the virus management at the enterprise are identified: opening, development, participation, diffusion, sustainability. The principles of introduction of the viral management in the enterprises of the coal industry are offered. It is established that the main idea of the viral management is to “infect” the organization and, mainly, employees with one or another “virus” in the form of a common idea or goal. It is indicated that the viral management assumes a certain automaticity of changes, internal “obsession” with this or other innovation, involvement of an informal personal factor.

  5. EFFICIENCY OF FIRE-FIGHTING PROTECTION OBJECTS IN PROVISION OF FIRE SAFETY AT INDUSTRIAL ENTERPRISES

    Directory of Open Access Journals (Sweden)

    A. V. Zhovna

    2008-01-01

    Full Text Available The paper gives an analysis of economic results pertaining to organization of a system for fire-fighting protection of industrial enterprises in theRepublicofBelarus. Statistical data on operational conditions of technical means of fire-fighting protection, particularly, automatic systems for detection and extinguishing of fires, systems of internal fire-fighting water-supply.  Requirements and provisions  of normative and technical documents are thoroughly studied. Observance of these documents is to ensure the required level of  fire safety. On the basis of the obtained results concerning  economic analysis of efficiency optimization directions are defined for selection of technical means of fire-fighting protection at objects of industrial purpose.

  6. The Conceptual Framework of «Diversity Management» in the System of Strategic Management of Industrial Enterprise Development

    Directory of Open Access Journals (Sweden)

    Stadnyk Valentyna V.

    2016-08-01

    Full Text Available The problem of strengthening the innovation component in strategic management of industrial enterprises under conditions of globalization has been actualized. The essence and features of innovative development of enterprise structures in the context of their competitiveness have been considered. The attention is focused on the fact that the innovative development should ensure an increase in the enterprise ability to create products having customer value. On the basis of the analysis of the essence and direction of innovative activity of industrial enterprises it has been proved that its results do not create conditions for their innovative development. It has been determined that by the nature of ongoing changes the innovative development is a revolutionary transformation altering its system attractor according to a new phase of the operation. This increases the viability of enterprises in the context of economic activities making them more flexible, able to adapt in the long run. It is emphasized that this increases the level of heterogeneity of enterprises in terms of factors of resources, processes and preferences. The relationship between the heterogeneity of economic resources and choosing by the enterprise management certain types of competitive strategies is shown. It is argued that the choice of a competitive strategy depends on the ability of the enterprise to recombine resources and processes. There made a suggestion about the expediency of changing approaches to the organization of the enterprise innovative activity to improve its efficiency in terms of resource recombination. It is noted that this can be achieved through the implementation of the concept of “diversity management”. The conceptual framework of the implementation of diversity management has been described. It is asserted that its organizational basis is the management decentralization expanding the motivational basis for innovative research participants.

  7. Industry characteristics management of innovative processes at the enterprises of light industry

    OpenAIRE

    Yusupov, Ulugbek

    2015-01-01

    This article considers the issues of innovative development and management of innovative processes in the knitting industry of Uzbekistan. Analyzed the main directions of innovative processes and provides recommendations for their management.

  8. Cluster as a Tool to Increase the Competitiveness and Innovative Activity of Enterprises of the Defense Industry Complex

    Directory of Open Access Journals (Sweden)

    Katrina B. Dobrova

    2017-01-01

    Full Text Available Purpose: the main goal of the publication is to make a comprehensive study of the possible application of the cluster approach to improve the competitiveness and innovation activity of enterprises of the defense industry complex.Methods: the methodology of the research is based on the collection and analysis of initial data and information, the article uses a systematic approach to the study of socio-economic processes and phenomena. The research is based on modern theory of competition, innovation, as well as the modern paradigm of cluster development of the economy. In preparing the study, practical materials from Corporation “Rostec”.Results: the article gives the notion of cluster, the prospects for the use of the cluster approach to enhance competitiveness and innovation enterprises of the military-industrial complex. It is noted that the activation of interaction with the “civil sector” is particularly relevant in the context of the reduction of the state defense order, and the theory and practice of cluster management offers a number of forms of cluster interaction between the enterprises of the defense industry and the civil sector. It is emphasized that the development of cluster mechanisms can solve a number of problems related to the insufficient financial stability of defense industry enterprises in the context of a reduction in the state defense order, low innovation activity and the lack of developed models of interaction with small innovative enterprises. Ultimately, the use of cluster mechanisms in the development of defense enterprises is intended to enhance the competitiveness of the complex, both nationally and globally. It is stated that the existing clusters are not able to fully solve a number of specific tasks related to the diversification of integrated defense industry structures. Attention is drawn to the fact that existing clusters are not able to fully solve a number of specific tasks related to the

  9. MODELING OF THE INFLUENCE OF OPERATING INCOME ON THE VALUE OF INDUSTRIAL ENTERPRISE

    Directory of Open Access Journals (Sweden)

    Irina A. Kaluzhskikh

    2017-06-01

    Full Text Available Evaluation of the key factors in the cost of industrial enterprise is an important tool not only for the valuation of the newly acquired companies, but also in assessing the choice of the best of the alternative strategies for the development of existing companies, since it allows to evaluate the performance of the enterprise in terms of maximizing its value. The authors study the mechanisms of allocating such factors on the basis of the indicator of added economic value, and on the basis of assessing the influence of the key factors on the cost of the business.The components forming the indicator of added economic value are presented as secondorder factors. Third-order factors reflect the influence of certain indicators of revenues and operating expenses of invested capital i.e. the elements of control by senior managers. The article highlights the performance of the third order, affecting the value of the business: operating profit (EBIT; cost of equity (Кs; value of shareholders’ equity (S; cost of debt (Кd; value of the borrowed capital (D. The article highlights the key value drivers of the company, which are interrelated parameters, which allow to valuate business and to manage its development efficiently. To form the economic and mathematical model of assessing key factors of company’s valuation, the authors used the mathematical apparatus of assessing the company’s value sensitivity to the mentioned factors. As a result, the authors developed a model assessing the influence of operating profit factor on the value of the enterprise.

  10. The Factors and Transversal Reorganizations Principles of Romanian Textile Industry Enterprises using Activity-Based Costing Method

    Directory of Open Access Journals (Sweden)

    Sorinel Capusneanu

    2007-04-01

    Full Text Available This article describes the factors and the principles of transversal reorganization of the enterprises from the Romanian textile industry by adapting the Activity-Based Costing method (ABC to its specific. There are presented and analyzed the real possibilities of reorganization of the enterprises in Romania by elaboration of methodological phases that will be covered until the implementation of their transversal organization. Are we ready to adapt the Activity-Based Costing method to the specific of the Romanian textile industry and not only? Here is the question whose response we will find in this article.

  11. The Formation of the System of Innovation Management of Development of Enterprises of Hotel-Restaurant Industry

    OpenAIRE

    Davydova Oksana Yu.

    2017-01-01

    The article is aimed at elaborating a methodical approach to the formation of the system of innovation management of development of enterprises of hotel-restaurant industry. The main problems of the domestic enterprises of hotel-restaurant industry were considered. An analysis of economic essence of the concepts of: «system», «innovations», «management», «development» was carried out and the interrelation between them was determined. The decomposition analysis of the concept of «innovation ma...

  12. Opening of material analysis beamline (BL-5) at NewSUBARU for industrial enterprises

    International Nuclear Information System (INIS)

    Hasegawa, Takayuki; Uemura, Masaharu; Tsurui, Takafumi; Shimizu, Masayoshi; Amemiya, Kenta; Fukushima, Sei; Ohta, Toshiaki; Motoyama, Muneyuki; Kanda, Kazuhiro

    2010-01-01

    A material analysis beamline for the industrial enterprises' use was completed at BL-5 of NewSUBARU synchrotron radiation facility in University of Hyogo in March 2008. BL-5 consists of two branch lines, one is a double crystal monochromator beamline (BL-5A) for the use in the higher-energy region (1300-4000 eV) and the other is a varied line spacing plane grating (VLSPG) monochromator beamline (BL-5B) for the use in the lower-energy region (50-1300 eV). These two branch lines can be operated simultaneously. BL-5 covers the soft X-ray region from 50 to 4000 eV and X-ray absorption spectrum can be measured with a high-energy resolution. The XAFS measurements in the total electron yield (TEY) and fluorescence yield (FLY) can be performed at BL-5A and BL-5B. In addition, the XPS spectra can be measured at BL-5B. BL-5 will be managed and maintained by the Synchrotron Analysis L.L.C. (SALLC), which is composed of the industrial companies, in cooperation with the staffs of the Laboratory of Advanced Science and Technology for Industry in University of Hyogo. Industrial users can be assisted by staffs of SALLC in the measurement at BL-5. (author)

  13. A methodology to incorporate life cycle analysis and the triple bottom line mechanism for sustainable management of industrial enterprises

    Science.gov (United States)

    Wang, Ling; Lin, Li

    2004-02-01

    Since 1970"s, the environmental protection movement has challenged industries to increase their investment in Environmentally Conscious Manufacturing (ECM) techniques and management tools. Social considerations for global citizens and their descendants also motivated the examination on the complex issues of sustainable development beyond the immediate economic impact. Consequently, industrial enterprises have started to understand sustainable development in considering the Triple Bottom Line (TBL): economic prosperity, environmental quality and social justice. For the management, however, a lack of systematic ECM methodologies hinders their effort in planning, evaluating, reporting and auditing of sustainability. To address this critical need, this research develops a framework of a sustainable management system by incorporating a Life Cycle Analysis (LCA) of industrial operations with the TBL mechanism. A TBL metric system with seven sets of indices for the TBL elements and their complex relations is identified for the comprehensive evaluation of a company"s sustainability performance. Utilities of the TBL indices are estimated to represent the views of various stakeholders, including the company, investors, employees and the society at large. Costs of these indices are also captured to reflect the company"s effort in meeting the utilities. An optimization model is formulated to maximize the economic, environmental and social benefits by the company"s effort in developing sustainable strategies. To promote environmental and social consciousness, the methodology can significantly facilitate management decisions by its capabilities of including "non-business" values and external costs that the company has not contemplated before.

  14. A Model For the Development οf Employees’ Learning (Career Path in Industrial Enterprises

    Directory of Open Access Journals (Sweden)

    G. Chakamian Keshvari

    2018-02-01

    Full Text Available The goal of this study is to propose a model for the development of employees' learning (career path in industrial enterprises. In the research a descriptive-survey method along with field research were used. The statistical population consists of all 110 employees of Dana Baspar's enterprises. A questionnaire with content verified by 30 experts along with the supervisor and the advisor was employed. Related validity of the questionnaires and their stability were 70%, counted by Cronbach's alpha, showing a good level of stability. Descriptive statistics for demographic data (frequency, standard deviation and mean and inferential statistics were used. Research findings show that the influence of workshop and experimental skills gained by apprenticeship, the effect of training by holding meetings and seminars with experts or experience acquired during work is significant and positive on organizational productivity while the mediation variable of professional skills exists but the influence of classic and academic trainings is not positive and significant on organizational productivity considering the existence of mediation variables.

  15. Influence of Big Data on Manufacturing Industry and Strategies of Enterprises: A Literature Review

    Directory of Open Access Journals (Sweden)

    Zhao Zhao

    2017-01-01

    Full Text Available Along with the rapid development of information technologies, such as cloud computing, mobile internet and internet of things, and the promotion of IT application, all kinds of data are generated and accumulated rapidly in various ways, big data era is coming, in which enterprises are faced with both opportunities and unprecedented challenges. Various processes, from decision making to operation and from designing to marketing, are being influenced by big data in manufacturing industry. This paper, according to the nature and features of big data, analyzes and extends a classical model of organizational change, Leavitt’s model of organizational change, in order to explore the ways for enterprises to cope with challenges and seize chances of development in big data era. Then, using the extended Leavitt’s model, opportunities and challenges derive from big data are combed, and approaches to making use of big data and coping with big data are generalized from five perspectives, including task, structure, people, technology and environment.

  16. Innovative development and factors affecting the innovative activity of industrial enterprises in Bulgaria

    Directory of Open Access Journals (Sweden)

    Sotirova Asya Olegova

    2016-12-01

    Full Text Available Innovations are a necessity, innovations are a factor, innovations are the moving force of the companies in the 21st century. Every modern manager should recognize the role of innovations for the existence of the enterprises and to aim at innovative development. The novelties in various areas are to be followed up. It is necessary to look for the options and to overcome the obstacles standing in the way of innovations. The major objective of this article is to establish the state of innovative activity of industrial enterprises in Bulgaria and to identify the factors exercising the largest influence on their innovative development. The major results to be achieved are the establishment of the basic internal and external factors that support innovations, the deduction of the major problems occurring during the innovation process and the establishment of some directives to activation. The major methods of study used in this work are statistical methods for evaluation, method of analysis and synthesis, method of comparison. Information of literature sources has been studied and systematized within the process of research, as well as analytical reports of Bulgaria and the European Union, and results from an inquiry held are used, as well as statistical data of the National Statistical Institute of the Republic of Bulgaria.

  17. Sustainable Product Service Systems in Small and Medium Enterprises (SMEs: Opportunities in the Leather Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Ricardo J. Hernández Pardo

    2012-01-01

    Full Text Available This paper presents an approach to identify opportunities to develop sustainable Product Service Systems (PSS involving Small and Medium Enterprises (SMEs. The purpose of the research is to build understanding of how the integration of product and service design and the use of Information and Communication Technologies (ICT can contribute to identify opportunities to develop sustainable PSS involving SMEs. In order to develop the approach, research with 16 Colombian Manufacturing SMEs was carried out. A reference model and four generic types of PSS according to the relationships between product and service design and ICT are used to analyse the data. Finally, the possibility of extending the approach into a general framework to work with other industries is discussed.

  18. STRATEGY OF DEVELOPMENT OF ADMINISTRATIVE CAPACITY OF THE INDUSTRIAL ENTERPRISE AS INSTRUMENT OF ENSURING ITS COMPETITIVENESS

    Directory of Open Access Journals (Sweden)

    O. N. Dmitriev

    2013-01-01

    Full Text Available A number of problem questions of formation of strategy of development of administrative potential of the modern Russian enterprise which realization provides competitive advantages of the enterprise in its mutual relations with counterparts is considered.

  19. Considerations regarding tax optimization in implanted multinational enterprises through external growth for the automobile industry in Central Eastern Europe

    Directory of Open Access Journals (Sweden)

    Nitu Antonie Renata

    2008-04-01

    Full Text Available The business strategy of multinational enterprises (MNEs from the automobile industry implanted in Central-Eastern European (CEE countries (Poland, Czech Republic and Romania is an offensive one, global from operational perspective. Mainly it aims the extension of market share through horizontal growth, generally external type single-domain (Mergers and Acquisitions and internal type (Greenfield investments in a lower degree. These enterprises put in practice also a defending strategy for the owned market shares through increasing the efficiency of the production network at global level. This paper aims to present the less evident aspects of tax optimization of the applied business strategy by implemented MNEs in the automobile industry in CEE, and in this context, the necessity to establish transfer prices in accordance with the OECD recommendations, as an obligation assessed by the tax legislations of the considered countries, but also from the necessity of efficient run of these enterprises.

  20. DEVELOPMENT OF METHODS OF ESTIMATION, ANALYSIS, SUBSTANTIATION AND SELECTION OF ORGANIZATIONAL AND TECHNOLOGICAL DECISIONS FOR RECONSTRUCTION OF INDUSTRIAL ENTERPRISES

    Directory of Open Access Journals (Sweden)

    SIEDIN V. L.

    2017-02-01

    Full Text Available Raising of problem. Over the past decade, changes in the economy have led to the decline of many industrial enterprises, which in turn led to the emergence of abandoned buildings and degraded areas that create a social and environmental hazard. Accordingly, the buildings and structures of such enterprises do not function and need reconstruction. Purpose of the aricle. Study of the development of methods for assessing, analyzing, substantiating and selecting rational organizational and technological decisions for the reconstruction of industrial enterprises. Conclusion. With the aim of transforming degraded and disordered territories into modern centers of vital activity, it is necessary to identify in each populated area the areas of priority renovation and reconstruction, and also to concentrate budgetary funds and private investments for the implementation of such projects. In the implementation of the above measures, the settlements will be systematically updated in accordance with european standards.

  1. Research and analysis of modernization processes in food industry enterprises of Ukraine

    Directory of Open Access Journals (Sweden)

    Buzhimska K.O.

    2017-08-01

    Full Text Available The modernization of domestic enterprises is a prerequisite for the integration of Ukraine into the European Union, first of all it concerns food industry enterprises, because they have the greatest potential for access to European markets with their own products. Accelerated modernization will provide an opportunity to improve the quality and safety of domestic food products and bring them closer to world standards. The methods and methodology of economic and statistical analysis remain the focus of the scholars. The analysis of trends, directions of development, and results of activities creates a basis for the adoption of quality management decisions, both at the strategic and operational levels. The study of the modernization process is impossible without the use of methods of economic and statistical analysis for a general evaluation of its state and efficiency. The paper proposes the relative indicators of asset value dynamics, residual value of fixed assets, volumes of sales, financial results before taxation, net profit for a generalizing assessment of the modernization process. It is substantiated that the modernization process is effective if the growth rate of asset value is greater than one unit, the growth rate of the residual value of fixed assets increases the growth rate of assets, the growth rate of sales of products is greater than the growth rate of residual value of fixed assets, the rate of growth of financial results before taxation is higher than the pace, the growth of sales volume, the growth rate of net profit is higher than the growth rate of the financial result before taxation. Using the Spirmeno coefficient, the authors obtained following results: the modernization process was most effective in 2011–2012, the modernization processes in food industry sharply slowed down during 2013–2015, but due to the already formed potential, they continue confirming the integral indices of the state and efficiency of

  2. The competitiveness of small and medium sized enterprises of stone industry

    Directory of Open Access Journals (Sweden)

    Nikraftar Tayebeh

    2016-01-01

    Full Text Available This study aims to examine the antecedents of stone firms competitiveness based on Porter's model. Questionnaire data collected from 200 senior stone firms' members in Iran. The results show that all aspects of porter model have positive effects on competitiveness. Also, factor conditions contributed significantly to enterprises competitiveness and are the most important predictor among all other of the antecedents of competitiveness. Because the data is limited to stone industry, future studies need to validate these results in other industries. The findings of this study suggest that, to increase competitiveness ability, the stone firms should invest in developing and enhancing factor conditions. The value of this paper lies in its contribution to understanding better the predictors of competitiveness. Particularly, the paper adds to the existing literature by showing that the key success factors for competitiveness are factor and demand conditions. People who want to work for the industry should promote the factor and demand conditions. It is better that they work in the areas which have enough demand and factor conditions.

  3. Implementation of energy-saving policies in China: How local governments assisted industrial enterprises in achieving energy-saving targets

    International Nuclear Information System (INIS)

    Zhao, Xiaofan; Li, Huimin; Wu, Liang; Qi, Ye

    2014-01-01

    Local governments have replaced the national ministries that are in charge of various industries to become the primary implementer of energy-saving policies in China since 2000. This paper employs a case study-based approach to demonstrate the significance of local governments’ policy measures in assisting industrial enterprises with energy-saving activities in China. Based on the longitudinal case of the Jasmine Thermal Electric Power Company, this paper hypothesizes that sub-national governments have played a major role in implementing energy-saving policies in China since the 11th Five-year-plan period. A wide range of provincial and municipal agencies collaborated in implementing five types of policy measures – informational policy, skill building, improved enforcement of central directives, price adjustment, and funding – that reduced barriers to energy saving and motivated active pursuit of energy-saving activities at industrial enterprises. The case study demonstrates how an enterprise and local governments work together to achieve the enterprise's energy-saving target. The authors will investigate the hypothesis of this paper in the context of multiple case studies that they plan to undertake in the future. - Highlights: • We employ a case study-based approach to study policy implementation in China. • Local governments have played a major role in implementing energy-saving policies. • Local public agencies collaborated in implementing five types of policy measures. • Local policy measures reduced barriers to energy saving at industrial enterprises. • Enterprises and local governments work together to achieve energy-saving targets

  4. The strategy of innovation and investment activity of the integrated agro-industrial enterprises

    OpenAIRE

    LYTNEVA N.A.; GONCHAROV P.V.; KYSHTYMOVA E.A.

    2015-01-01

    In this article reveals the relevance of research to improve the system of strategic planning of innovation and investment activity in the agricultural enterprise, types of planning innovative-investment activity of agrarian enterprises, software-oriented model of strategic planning of innovation and investment activities of AIC, the evaluation criteria of innovation and investment activity of agricultural enterprises.

  5. A Bayesian Approach to International Distributor Selection for Small and Medium-Sized Enterprises in the Software Industry

    Science.gov (United States)

    Lui, Joseph P.

    2013-01-01

    Identifying appropriate international distributors for small and medium-sized enterprises (SMEs) in the software industry for overseas markets can determine a firm's future endeavors in international expansion. SMEs lack the complex skills in market research and decision analysis to identify suitable partners to engage in global market entry.…

  6. Constraining Energy Consumption of China's Largest IndustrialEnterprises Through the Top-1000 Energy-Consuming EnterpriseProgram

    Energy Technology Data Exchange (ETDEWEB)

    Price, Lynn; Wang, Xuejun

    2007-06-01

    Between 1980 and 2000, China's energy efficiency policiesresulted in a decoupling of the traditionally linked relationship betweenenergy use and gross domestic product (GDP) growth, realizing a four-foldincrease in GDP with only a doubling of energy use. However, during Chinas transition to a market-based economy in the 1990s, many of thecountry's energy efficiency programs were dismantled and between 2001 and2005 China's energy use increased significantly, growing at about thesame rate as GDP. Continuation of this one-to-one ratio of energyconsumption to GDP given China's stated goal of again quadrupling GDPbetween 2000 and 2020 will lead to significant demand for energy, most ofwhich is coal-based. The resulting local, national, and globalenvironmental impacts could be substantial.In 2005, realizing thesignificance of this situation, the Chinese government announced anambitious goal of reducing energy consumption per unit of GDP by 20percent between 2005 and 2010. One of the key initiatives for realizingthis goal is the Top-1000 Energy-Consuming Enterprises program. Thecomprehensive energy consumption of these 1000 enterprises accounted for33 percent of national and 47 percent of industrial energy usage in 2004.Under the Top-1000 program, 2010 energy consumption targets wereannounced for each enterprise. Activities to be undertaken includebenchmarking, energy audits, development of energy saving action plans,information and training workshops, and annual reporting of energyconsumption. This paper will describe the program in detail, includingthe types of enterprises included and the program activities, and willprovide an analysis of the progress and lessons learned todate.

  7. A comparative study of Japan and United States nuclear enterprise: Industry structure and construction experience

    International Nuclear Information System (INIS)

    Hinman, G.W.; Lowinger, T.C.

    1987-01-01

    Both Japan and the United States have undertaken major programs to utilize nuclear power for central station electricity generation. Over the past 20 years, the Japanese have developed their own construction and government regulatory institutions and now have an essentially independent domestic nuclear power program. Nuclear construction and government oversight of nuclear power have developed somewhat differently in Japan and the United States, reflecting to some extent the two countries' different business and social cultures. In the United States the vendor and utility industries are much more fragmented than those in Japan, and construction projects are carried out on a more competitive basis. The Japanese industry operates through a few well-established consortia while the U.S. industry does not. Relations among the national government, the vendors, and the electric utilities tend to be cooperative in Japan while they are more adversarial in the Untied States. This paper discusses these topics in a framework of a comparative study of the countries' nuclear industries. Whether because of the factors mentioned above or for other reasons the success of nuclear power in Japan and the United States has differed dramatically in recent years. This paper compares the performance of the nuclear enterprise in these two countries in terms of the physical attributes of the plants themselves, the labor required to build them, and the construction times required. It also discusses the relationship between initial estimates of costs and schedules and actual results achieved. On all counts, recent Japanese performance has been better than in the United States

  8. The unique field experiments on the assessment of accident consequences at industrial enterprises of gas-chemical complexes

    International Nuclear Information System (INIS)

    Belov, N.S.; Trebin, I.S.; Sorokovikova, O.

    1998-01-01

    Sour natural gas fields are the unique raw material base for setting up such large enterprises as gas chemical complexes. The presence of high toxic H 2 S in natural gas results in widening a range of dangerous and harmful factors for biosphere. Emission of such gases into atmosphere during accidents at gas wells and gas pipelines is of especial danger for environment and first of all for people. Development of mathematical forecast models for assessment of accidents progression and consequences is one of the main elements of works on safety analysis and risk assessment. The critical step in development of such models is their validation using the experimental material. Full-scale experiments have been conducted by the All-Union Scientific-Research institute of Natural Gases and Gas Technology (VNIIGAZ) for grounding of sizes of hazard zones in case of the severe accidents with the gas pipelines. The source of emergency gas release was the working gas pipelines with 100 mm dia. And 110 km length. This pipeline was used for transportation of natural gas with significant amount of hydrogen sulphide. During these experiments significant quantities of the gas including H 2 S were released into the atmosphere and then concentrations of gas and H 2 S were measured in the accident region. The results of these experiments are used for validation of atmospheric dispersion models including the new Lagrangian trace stochastic model that takes into account a wide range of meteorological factors. This model was developed as a part of computer system for decision-making support in case of accident release of toxic gases into atmosphere at the enterprises of Russian gas industry. (authors)

  9. Development of strategic cooperation of higher school and industrial enterprises to promote innovative development

    Directory of Open Access Journals (Sweden)

    A. O. Ermakov

    2016-01-01

    Full Text Available In this article the author analyzes the provisions of the national system of strategic planning of innovation development, of strategic planning documents within the formation of the concept of innovative development of the Russian economy, its transition to the knowledge economy Along with this, the author reviewed the current development indicators of the Russian economy and comparative analysis of world GDP and volumes of financing of scientific development of the countries of the world - the Global Competitiveness Report. The article provides the analysis and decomposition of component Pillar 12. Innovation on the innovative activity in Russia. The author gives the analysis on number of people employed in research and development personnel in the dynamics and by countries. The article presents information on the funding of scientific research in the United States, Japan, Russia, etc. as percentage of GDP and in absolute values. The article shows a consolidated list of used Russia's innovation promotion instruments (subsidies of costs for innovative projects, project financing, etc., taking account of links to documents, implementating these tools. The author considers problems of cooperation of Universities with industry in the establishment of such interaction as a factor of innovative growth in foreign literature. In the conclusion the author formulates a proposal for the intensification of research to improve forms of strategic partnership of universities and industrial enterprises on the basis of experience researchers form eastern countries, the results of applying the introduced tools at the state and regional levels and binding of adapting them to Russian realities and specifics.

  10. Intellectual Capital in Enterprises and a Model Study in an Industrial Zone

    Directory of Open Access Journals (Sweden)

    Selcuk Kendirli

    2014-09-01

    Full Text Available Intellectual Capital in Enterprises and a Model Study in an Industrial Zone   Abstract The study mainly consists of two parts. The first part includes theoretical knowledge, the second part includes application-oriented information. In the theoretical part of the study, intellectual capital and SMEs are emphasized in general. In the application-oriented part of the study, a field research will be done for Corum SME. In this study, the demographic structure of Corum SMEs, intellectual capital structure and financial performance of this structure will be evaluated. The resulting data will be analyzed in this context. The businesses operating in the Organized Industrial Zone of Corum and those matching the definition of SME will be considered within the research scope. Surveys will be applied by interviewers face to face and each survey will be evaluated individually. After the evaluation, a model will be proposed. The aim of our study is to investigate the relationship between components of intellectual capital in SMEs and business performance. For this reason, a survey will be conducted for SMEs. Since the results of the study will be shared with scientific circles and the public, they will prove to be guiding for Çorum SMEs.

  11. Institutionalization of Markets and Issues of the Growth of Industrial Enterprises

    Directory of Open Access Journals (Sweden)

    Zamazii Oksana V.

    2015-09-01

    Full Text Available The article developes and proves a scientific hypothesis that strengthening the integration processes in the market space causes its institutionalization, and thus leads to the issues of proliferation of the free market players as a result of a division of spheres of influence between the major financial-industrial groups and corporations. It has been proved that a clear hierarchical structure, along with rigid subordination of free economic agents to the chief processor of resources within the growing corporations are those preconditions, which gradually form characteristics of an organization or an institution in terms of markets. An author's own definition of the notion of «institutional market» has been proposed, which is different from the classic formulation. It is emphasized that institutionalization of market space turns the latter into an another economic system, the main characteristics of which are: limited number of buyers and sellers; presence of conglomerates with rigid hierarchical relationships between buyers and sellers; etc. Enlargement and diversification of business as well as growth of its influence not only within its own industry sector, but also in the related sectors, leads to the fact that corporations are trying to control markets (supply and demand which meantime are turning into rigid management structures, acquiring characteristics of institutions (organizations. This hinders the market entry of new market players, increases risks of business and requires on the part of enterprises new marketing techniques for positioning the own ability to create customer value.

  12. Solutions for the disposal of industrial and rain wastewater of transport enterprises in Moscow

    Directory of Open Access Journals (Sweden)

    Varyushina Galina

    2018-01-01

    Full Text Available The article gives results of the surveys water management systems, auto repair companies, bus compamies, taxis, fleets of trucks, production and technical enterprises. Studied technological processes of primary production: cleaning engines, flushing of radiators and parts of batteries, testing of fuel tanks, cleaning of parts and units, exterior washing and painting of motor vehicles. There were carried out field examinations of local industrial wastewater treatment facilities industrial wastewater and onsite construction runoff, the laboratory-production work to identify quantitative and qualitative indicators of the incoming and treated effluents, including petroleum products, suspended matter, salinity, synthetic surfactants, heavy metals etc. Proposed sustainable solutions for the improvement of the work of treatment facilities of rain sewage by mechanical and physical and chemical methods, including horizontal sand catchers, septic tanks – oil separator, a cascade of pressure filters with granular mineral over-loading and high-performance sorption materials, the effectiveness of treatment meets the requirements of water for its re-use for technical needs, and discharge to water bodies.

  13. THE POSSIBILITY OF USING INTERNATIONAL EXPERIENCE IN MICRO-CREDIT FOR SMALL AND MEDIUM-SIZED INDUSTRIAL ENTERPRISES

    Directory of Open Access Journals (Sweden)

    I. N. Klyukin

    2016-01-01

    Full Text Available Purpose of the study. Increasing the availability of funding for small and medium-sized enterprises of the industrial sector put among the most important tasks of economic development as the leading developed countries, and developing countries. In connection with the above, the purpose of this article is to study the micro-credit as an efficient mechanism to stimulate the development of small and medium-sized industrial enterprises and analyzing the possibility of using foreign experience in improving the process of micro-credit to stimulate their development.Research Methodology. The study was conducted on the material of publications on various aspects of the microcredit industry small and medium businesses, including international experience in micro-credit for small and medium-sized industrial enterprises.The article analyzes the functioning of the various models and micro-technologies, disclosed interoperability of commercial banks and microfinance institutions (MFIs in the framework of country-specific microcredit models, and formulated the immediate tasks and activities of the government and regulatory authorities of the Russian Federation aimed at improving the financing of small and medium-sized industrial enterprises.Sounding the findings suggest that the funds to support small and medium-sized industrial enterprises should be more actively attract private investment in the implementation of industrial and innovative development of their projects. In this case, the intensification of financial-credit and investment support to small and medium-sized industrial enterprises, integration and optimization of the different sources of financial resources create favorable conditions for their access to financial and credit resources, and improvement of financial and credit support mechanisms will enhance their responsibility for use granted resources and contribute to their development. At the same time, the main focus of the use of public

  14. Methodical Approach to Assessment of Quality of Labour Life of Industrial Employees Using Example of Engineering Enterprises

    Directory of Open Access Journals (Sweden)

    Stamatin Oleksandr V.

    2014-03-01

    Full Text Available The goal of the article is presentation of results of study of factors of influence upon quality of labour life of industrial employees and justification of a scorecard of its assessment at the micro-economic level with the use of statistical methods of study. The article proves that the quality of labour life is based on enterprise capabilities, which depend on economic results, identified by the use of financial, material and human resources, effectiveness of the innovation and investment activity. The article reveals main factors that influence the quality of labour life of industrial employees using example of engineering enterprises: labour remuneration, social provisions, possibility to develop personnel, progressive state of fixed assets, financial sustainability of the enterprise, and effectiveness of investing into innovation activity. The article proves expediency of use of statistical methods of study for assessment of quality of labour life of employees, namely: multi-dimensional factor analysis, neural networks and folded additive technique. Their use helped to reveal indicators that are the most sensitive to managerial impact for ensuring quality of labour life. The article justifies stages of methodical approach to assessment of the quality of labour life of industrial employees, which was applied at engineering enterprises, which proves its significance and theoretical substantiation.

  15. Improving the Approaches to Organization of Strategic Process at Enterprises of the Bakery Industry Branch of Ukraine

    Directory of Open Access Journals (Sweden)

    Zavertany Denys V.

    2018-03-01

    Full Text Available Today, both the production and the non-production organizations cannot function efficiently without defining the mission and values that explain why they are in the business, what products they produce, and what consumer market they target. Therefore, it becomes relevant to research the definitions of of the strategic process for the enterprises of bakery industry branch of Ukraine to ensure their sustainable development in the context of globalization and the development of market economy. The purpose of the research is to improve the approaches to organization of strategic process at the enterprises of bakery industry branch of Ukraine. The study was based on the use of such approaches and methods: dialectical, systemic, causal method, theoretical generalization and comparison. The types of strategic process which can be applied by the enterprises of bakery industry branch of Ukraine have been defined. A stable relationship between the external and the internal environments of the strategic process, with the allocation of the functioning elements for each of them, has been determined. It is proved that close interaction of both external and internal environment plays a key role in the formation of organizational design of a bakery enterprise.

  16. New approaches to enhancing efficiency of freight railway stations performance within industrial enterprises

    Directory of Open Access Journals (Sweden)

    Ваагн Емілійович Парунакян

    2015-03-01

    Full Text Available At present time freight stations operation is complicated by raised dynamics of production and transport processes. Under the given handling capacity, this circumstance affects duration of processing of inbound and internal flow of freight cars. In connection with the abovementioned, the article covers new approaches to the analysis and evaluation of operating characteristics, and designing of railway freight stations within industrial enterprises. These approaches base on the system adaptation of the railway freight stations structural layouts and parameters of technical facilities to new working conditions and production demands. As the criterion of optimization of freight station operation, the index of “transportation work” (freight car-hour was offered. It allows differentiating the elemental flows of freight cars from the overall flow of freight cars at the freight station. It also allows identifying structure, volumes and other parameters of train operation (duration of processing measured in freight car-hours, interpretational and technological idle time denoting the location and the reason for their occurrence. Moreover, the analysis and evaluation of yard operation is offered to be carried out via handling capacity balance, which illustrates the relation between the overall volume of transportation work and the amount of trains handled at the station. This allows establishing additional transportation work and makes it possible to evaluate the real (objective necessity in throughput and handling capacity of station facilities in particular, and the station in general. The operating characteristics that have been examined determine the new methodical approaches to designing of composition-and-structural layouts and parameters of industrial freight stations. As the basis for optimization of the station, the certain method of morphological analysis and synthesis of technical decisions can be accepted, with its modification due to the

  17. The use of tubular belt conveyors for the industrial waste of enterprises

    Directory of Open Access Journals (Sweden)

    S. Ya. Davydov

    2017-12-01

    Full Text Available The methods of processing slag of electrolyzers and reverberatory furnaces slag of secondary aluminum production, obtained after extracting aluminum, as well as ash and slag of thermal power plants, hydro plants, waste of ferrous metallurgy in the construction industry are presented in this work. Tubular belt conveyor (TBC with the use of special expensive tapes, are widely used abroad for moving industrial raw materials. It is also used in Russia (Lebedinsky ore-dressing and processing enterprise and Reftinskaya hydro power. A tape which is rolled in a tube allows to improve the sanitary conditions of labor, to ensure the full safety of cargo, to exclude the harmful effects of aggressive chemical cargoes at the metal of the conveyor, extending its service life. There is an opportunity to convey materials under the angle of 20–25°. The main drawback of TBC, which exist today, is that they are working on an especially patented tape, which is very expensive and it is not produced in Russia. The costs of its replacement are comparable to the price of the pipeline. The Russian customers have already faced this problem. The components are not produced in Russia either, and the cost of their subsequent purchases increases dramatically. The technical parameters of TBC of the Lebedinsky ore-dressing and processing enterprise and the Reftinskaya hydro power, as well as a comparative table on the use of TBC are presented in this work. Lists of the advantages of TBC are also adduced. The characteristic of TBC Contitech are given. The use of modern anti-static and flame retardant polymeric materials in the manufacture of the rollers will allow further progress in solving the issues of safe operation of belt conveyors. Such important parameters as reliability and maintainability were taken into account while constructing these conveyors. The tests to replace the metal clips with the rollers, which are made of anti-static polymers are carried out. This

  18. PEMETAAN RISIKO DI INDUSTRI PENYAMAKAN KULIT DENGAN PENDEKATAN ENTERPRISE RISK MANAGEMENT (ERM

    Directory of Open Access Journals (Sweden)

    Helen Wiryani

    2014-09-01

    Full Text Available ABSTRACTThe aim of this study were 1 identify the risks faced by PT XYZ, 2 measure and map the risk of PT XYZ, 3 formulating an effective risk mitigation strategy for PT XYZ. The method of risk management with enterprise risk management approach (ERM was applied. Risk management with ERM can help companies better prepared to cope with uncertainty, increase the added value and competitive advantage. ERM approach to risk mapping is done by referring to the eight components of ERM. The first three components, namely internal environment, objective setting, and event identification, were used to observe PT.  XYZ situation and identify the risks that exist. A review of the business processes in PT XYZ shows that there are various strategic, operating, reporting, and compliance risks identified in the stages of the business process. Results showed 1 the risks found in the PT XYZ stages of business process were related to the field of strategic, operating, reporting, and compliance, 2 the amount of risk experienced by PT XYZ were reflected in the risk map formed on the measurement of risk based on probability and impact, 3 strategies need to be developed for effective risk mitigation for PT XYZ were prioritized addressing the highest risk first then to a lower risk.Keywords: ERM, FGD, risk management, upholstery industry, risk mappingABSTRAKTujuan  penelitian  ini  adalah 1 mengidentifikasi risiko yang dihadapi PT XYZ, 2 mengukur dan memetakan risiko PT XYZ, 3 merumuskan strategi mitigasi risiko yang efektif bagi PT XYZ. Metode pengelolaan risiko dengan pendekatan enterprise risk management (ERM. Pengelolaan risiko dengan ERM dapat membantu perusahaan lebih siap dalam  mengatasi ketidakpastian,  meningkatkan nilai tambah, dan keunggulan bersaing. Pemetaan risiko dengan pendekatan ERM dilakukan dengan berpedoman pada delapan komponen ERM. Tiga komponen pertama yaitu internal environment, objective setting, dan event identification dilakukan untuk

  19. Analysis on Potential of Electric Energy Market based on Large Industrial Consumer

    Science.gov (United States)

    Lin, Jingyi; Zhu, Xinzhi; Yang, Shuo; Xia, Huaijian; Yang, Di; Li, Hao; Lin, Haiying

    2018-01-01

    The implementation of electric energy substitution by enterprises plays an important role in promoting the development of energy conservation and emission reduction in china. In order to explore alternative energy potential of industrial enterprises, to simulate and analyze the process of industrial enterprises, identify high energy consumption process and equipment, give priority to alternative energy technologies, and determine the enterprise electric energy substitution potential predictive value, this paper constructs the evaluation model of the influence factors of the electric energy substitution potential of industrial enterprises, and uses the combined weight method to determine the weight value of the evaluation factors to calculate the target value of the electric energy substitution potential. Taking the iron and steel industry as an example, this method is used to excavate the potential. The results show that the method can effectively tap the potential of the electric power industry

  20. Macroeconomic, legal, administrative and cultural factors of technological innovations1 in Polish industrial enterprises

    Directory of Open Access Journals (Sweden)

    Stanisław Sudoł

    2016-12-01

    The vast majority of experts participating in the study positively assessed the cultural conditions of technological innovativeness in Polish enterprises. Experts also provided negative cultural characteristics of Poles.

  1. Seeds of growth for small enterprises in forestry and wood-processing industries; Kasvun evaeaet metsae- ja puualan pienyrityksille

    Energy Technology Data Exchange (ETDEWEB)

    Rieppo, K. (ed.)

    2010-07-01

    The theme of the research and development programme focusing on small enterprises in the forestry and wood processing industries in 2007-2010 was growth. Subcontracting in the wood harvesting and wood transport sectors has increased. In the wood harvesting sector, the growth reflects the existing financial situation. In the wood transport sector, a turnover smaller or larger than EUR 1-1,5 million weakens profitability. A clear trend in these sectors is expansion into new industries. The share of forest service enterprises in various work categories is increasing. A significant share of the growth is born when forest owners associations outsource their own forestry service production. Moreover, forests owned by municipalities, parishes and collective forests are a potential target for forest service enterprises. The forest energy business is built on the foundation of a new kind of competence and immaterial factors of production based on networking. Joint enterprises by machinery entrepreneurs have enabled a light organisational structure, effective and flexible management of production chains and raw material procurement as well as the sufficiency of machinery capacity. This also creates scale benefits and ensures delivery reliability. Heating entrepreneurs were interested in expanding their business to the one-family house category provided there is sufficient heating capacity. Among one-family house dwellers interest in district heating provided by a heating entrepreneur was significant. The small sawmill sector aimed to grow in moderation. The most important business objective for small sawmills was the improvement of profitability and a return on capital. Next in importance were satisfied customers and the reasonable livelihood of the owner. There are very few enterprises with actual growth orientation in the forestry and wood-producing industries. Development of entrepreneurship and business activities is important. In addition to entrepreneurs

  2. Co-creating value through demand and supply integration in senior industry-observations on 33 senior enterprises in Taiwan.

    Science.gov (United States)

    Yang, Ya-Ting; Iqbal, Usman; Chen, Ya-Mei; Su, Shyi; Chang, Yao-Mao; Handa, Yujiro; Lin, Neng-Pai; Hsu, Yi-Hsin Elsa

    2016-09-01

    With global population aging, great business opportunities are driven by the various needs that the elderly face in everyday living. Internet development makes information spread faster, also allows elderly and their caregivers to more easily access information and actively participate in value co-creation in the services. This study aims to investigate the designs of value co-creation by the supply and demand sides of the senior industry. This study investigated senior industry in Taiwan and analyzed bussiness models of 33 selected successful senior enterprises in 2013. We adopted series field observation, reviews of documentations, analysis of meeting records and in-depth interviews with 65 CEOs and managers. Thirty-three quality enterprises in senior industry. Sixty-five CEOs and managers in 33 senior enterprises. None. Value co-creation design, value co-creating process. We constructed a conceptual model that comprehensively describes essential aspects of value co-creation and categorized the value co-creation designs into four types applying for different business models: (i) interaction in experience spaces co-creation design, (ii) on-site interacting co-creation design, (iii) social networking platform co-creation design and (iv) empowering customers co-creation design. Through value co-creation platform design, the senior enterprises have converted the originally passive roles of the elderly and caregivers into active participants in the value co-creation process. The new paradigm of value co-creation designs not only promote innovative development during the interactive process, lead enterprises reveal and meet customers' needs but also increase markets and profits. © The Author 2016. Published by Oxford University Press in association with the International Society for Quality in Health Care. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  3. PROJECT MANAGEMENT INFORMATION SYSTEM: STUDY IN SMALL AND MEDIUM ENTERPRISES OF INDUSTRIAL AUTOMATION

    Directory of Open Access Journals (Sweden)

    Paulo Eduardo Mondin

    2016-12-01

    Full Text Available This article aims to analyze the structuring stage and use of information systems in project management in small and medium-sized companies in the business of providing services in industrial automation. Information systems applied to project management - SIGPs can contribute to decision-making on projects, assisting in the management of reliable information in real time, making it a natural choice for most companies looking to increase performance management of their projects. The research method used was multiple case study, in line with the explanatory nature of the study, when to investigate and perform analytical comparisons on how small and medium-sized enterprises of the studied branch structure and use the SIGPs, considering the contemporary character theme and the possibility of direct observation of the object of study, in addition to conducting interviews. The main results were identified the main gaps in project management in companies and research as the management characteristics of these SMEs have influence in how their projects are managed. It was observed that there is a predominance of features involving scope, time and resources on projects, whereas aspects related to costs, risks, quality, procurement and communications have unimpressive results in relation to structuring.

  4. The impact of using kiosk on enterprise systems in service industry

    Science.gov (United States)

    Chen, Jengchung V.; Yen, David; Dunk, Kimberly; Widjaja, Andree E.

    2015-11-01

    The hospitality industry services many types of travellers. Each of them needs to be analysed differently in order to accurately determine their respective service quality attributes and customer delight. The effective and efficient enterprise information systems (EISs) play a significant role in traveller's experience and in the competitive advantages that hotels can gain. For this study, self-service kiosks and guest service agents as part of hotel's EISs are used to investigate the impact each has on the experience of business and leisure travellers. This study provides empirical results that further investigate how to improve the service quality for both types of travellers during the registration process. This process is the first physical interaction between the travellers and the hotel. Any problem in registering would generate a long-lasting negative first impression on the travellers, thus diminishing the customer delight. In the light of our findings, this study will contribute to the effective and efficient design of self-service kiosk systems, hotel's EISs, and improved front office management to better accommodate the specific needs of both types of travellers.

  5. Forming the corporate strategy of cost management of an industrial enterprise

    Directory of Open Access Journals (Sweden)

    Timur Vladimirovich Kramin

    2015-03-01

    Full Text Available Objective to develop and substantiate one of the mechanisms of corporate strategy formation of an industrial enterprise cost management. Methods institutional cost and systemic approaches. Results in the article the classification of corporate strategies is elaborated in the framework of the cost management system. In accordance with the structure of the cost management system the classification of corporate strategy is used which is universal from the point of view of cost management integration at the level of managerial decisionmaking integration at the level of key competencies integration at the level of cost factors integration at integrativecost level. Each of these types of integration involves vertical and horizontal integration. Scientific novelty in the article the corporate strategies classification is elaborated in the framework of the cost management system. Practical value a holistic systemic approach to the corporate strategy classification facilitates the search selection and forming of optimal corporate strategy for each specific business. The main tool of this choice is the concept of cost management. nbsp

  6. Value Creation Mechanism of Social Enterprises in Manufacturing Industry: Empirical Evidence from Korea

    Directory of Open Access Journals (Sweden)

    Hosung Son

    2017-12-01

    Full Text Available A variety of social enterprises (SEs have recently emerged in many different countries in an effort to resolve diverse social problems. However, the value creation mechanism of SEs has not yet been disclosed. The purpose of this study is to reveal the value creation mechanism of SEs in manufacturing industry. To do so, we verify the role of social entrepreneurship and examine the effects of product innovation attributes and social capital on social value creation and financial performance by using structural equation modelling. Then, we conduct interviews with six experts in SE fields. According to the results of empirical study, the social entrepreneurship works as an antecedent of product innovation and social capital in SEs and the degrees of products’ simplicity, usability and standardization positively affect the social value creation of SEs. In addition, the social value creation works as a complete mediator between the product innovation of SEs and their financial performance. The interviews suggest policy implications for successful social value creation and sustainability of SEs. This research contributes towards further studies on innovation of SEs and provides social entrepreneurs with guidelines in planning their innovation strategy or developing their products.

  7. Mapping of micro and Small branch of industrial enterprises located in the cities of Agudo and Silveira Martins – RS

    Directory of Open Access Journals (Sweden)

    Carla Hartmann Sturm

    2016-06-01

    Full Text Available In the development of a country are the companies responsible for creating jobs, pay taxes and thus cause the economic and regional development. In Brazil, most of these institutions is made up of micro enterprises and small that often struggling to survive in the market. Therefore, it is necessary investments and public incentives to encourage their development making them competitive. In this sense, this article aims to develop a mapping of micro and small enterprises in the industrial sector in the cities of Agudo and Silveira Martins – Rio Grande do Sul (RS. For this, we used a descriptive research on the purposes and literature as to the means being prepared a questionnaire for collecting data from the sample studied. As results obtained ten micro companies and three small businesses were found in Agudo – RS, and the main industries are the timber industry and the manufacture of bakery products, influenced 65.5% of the employees of micro and small companies analyzed in the municipality. Already in Silveira Martins – RS were found seven micro and small enterprises, where six are classified as micro company and only one as small business. It was found also that the main industrial branch is the timber sector (six companies, in which 96% of employees work in any activity related to wood processing.

  8. Perceived Use and Acceptance of Cloud Enterprise Resource Planning (ERP) Implementation in the Manufacturing Industries

    Science.gov (United States)

    Adeboje, Adewale

    2015-01-01

    The purpose of this study was to gain an insight into perceived use and acceptance for implementing an enterprise resource planning system and the decision whether to contract out the enterprise resource planning (ERP) service to a cloud provider. Cloud-based ERP systems can provide many advantages to the normal implementation of the same systems…

  9. Small enterprises' importance to the U.S. secondary wood processing industry

    Science.gov (United States)

    Urs Buehlmann; Omar Espinoza; Matthew Bumgardner; Michael. Sperber

    2013-01-01

    The past decades have seen numerous U.S. secondary wood processing companies shift their production to overseas locations, mainly in Southeast Asia. The remaining companies have been hit hard by the downturn in housing markets and the following recession. Thus, many large customers of the U.S. hardwood lumber industry have reduced or stopped the purchase of products,...

  10. Methodical Approach to Assessment of the Structure of Demand on the Products of the Restaurant Industry Enterprises

    Directory of Open Access Journals (Sweden)

    Chorna Maryna V.

    2013-11-01

    Full Text Available The article presents a methodical approach to assessment of the structure of demand on the products (services of the restaurant industry enterprises and results of its approval. A characteristic feature of this approach is clear identification of stages and their logical consequence in the process of assessment (identification of the period of assessment – day, week, holidays, seasons; formation and systematisation of the information base by cost, quantitative and qualitative indicators; calculation of relative indicators of demand and income; building a matrix; and interpretation of results and application of the “demand level / income level” matrix. Use of the proposed approach allows identification of an assortment structure of the restaurant industry enterprise by correlation of the realised demand and obtained income, which gives a possibility to form managerial decisions on its improvement and also allows assessment of efficiency of these measures.

  11. Enterprise Risk Management in the Oil and Gas Industry: An Analysis of Selected Fortune 500 Oil and Gas Companies' Reaction in 2009 and 2010

    Science.gov (United States)

    Rogers, Violet C.; Ethridge, Jack R.

    2016-01-01

    In 2009, four of the top ten Fortune 500 companies were classified within the oil and gas industry. Organizations of this size typically have an advanced Enterprise Risk Management system in place to mitigate risk and to achieve their corporations' objectives. The companies and the article utilize the Enterprise Risk Management Integrated…

  12. Business excellence as a success factor for the performance of large Croatian enterprises

    Directory of Open Access Journals (Sweden)

    Ivica Zdrilić

    2016-06-01

    Full Text Available Croatian companies need a new approach that will provide them with sufficient competitive strength, based on business excellence. Focusing only on financial indicators and measures is insufficient. Therefore new concepts should be introduced, especially by large companies that are traditionally inert and exposed to global competition, and situated in the countries with ongoing transition, such as Croatia. Today 75% of the source of value within a company cannot be measured by means of the standard accounting techniques anymore, and in the 21st century it is impossible to rely exclusively on measuring financial parameters. According to the authors, in addition to financial measuring, a way should be found to measure non-financial parameters within a company. The paper is therefore aimed at exploring the influence of business excellence and its values on business in the Croatian business practice. The authors carried out a research on 106 large Croatian enterprises with more than 250 employees, exploring the connection between the values of business excellence and company performance, Results show a positive correlation between applying the principles of business excellence and successful company performance in practice.

  13. Governance of extended lifecycle in large-scale eHealth initiatives: analyzing variability of enterprise architecture elements.

    Science.gov (United States)

    Mykkänen, Juha; Virkanen, Hannu; Tuomainen, Mika

    2013-01-01

    The governance of large eHealth initiatives requires traceability of many requirements and design decisions. We provide a model which we use to conceptually analyze variability of several enterprise architecture (EA) elements throughout the extended lifecycle of development goals using interrelated projects related to the national ePrescription in Finland.

  14. Comparing the Productive Efficiency of Cooperatives and Private Enterprises: The Portuguese Wine Industry as a Case Study

    OpenAIRE

    Barros, Carlos Pestana; Santos, J.C. Gomes

    2007-01-01

    This paper compares the efficiency of cooperatives and private enterprises in the Portuguese wine industry, employing data envelopment analysis (DEA). The use of DEA for the analysis of comparative efficiency within a sector is a key tool in evaluating organizational competitiveness. Competitiveness should be based on benchmarking the different types of organizations that comprise the viniculture sector. We conclude that Portuguese wine cooperatives, on average, are more efficient than their ...

  15. Status and assessment of risks at the enterprises of industrial complex of the Northern region of the Crimea

    Directory of Open Access Journals (Sweden)

    V. V. Korotitskaya

    2016-01-01

    Full Text Available In today's unstable economic processes taking place in the country under the influence of a considerable number of factors of the external sector and the mobility of market conditions, the activities of a number of industrial enterprises of Northern Crimea does not ensure a profit necessary for their future development, there is a tendency to a sharp increase in the number and level of danger of the economic risks. The future for companies in such conditions becomes less predictable. Therefore, the success of the enterprise depends on the accurate and timely identification of sources and enterprise risk management, the accuracy of the assessment of future risks, development and implementation of preventive measures to prevent undesirable consequences. In this connection, it is proposed approved methods, which allows to determine the average probability of occurrence of a number of risks and their importance rating. Studies have shown that for a given period, the most severe for the enterprises of Northern Crimea region is the risk of lack of established supply chain of raw materials. For businesses, this can be expressed in interruptions and delays in deliveries, penalties from customers and their loss, as well as additional costs. The proposed method allows us to estimate the probability of occurrence of a risk, but it is not pointing to the possible effect of the risk, both negative and positive. The data obtained can be used in the development of national, regional and sectoral policies and programs, and provide full management of industrial enterprises the tools of risk management.

  16. Direct effect of ownership and technology import: Firm level evidence from large and medium-enterprises in Shanghai

    Institute of Scientific and Technical Information of China (English)

    ZHU Pingfang; LI Lei

    2007-01-01

    This paper explores the direct effect of ownership and technology imports under the fiamework of neoclassical economic theory.The econometric analysis is based on panel data from a random sample of large and mediumenterprises in Shanghai,during the period of 1998 to 2003.The results show that Sino-foreign joint ventures,Sino-foralgn cooperative enterprises and foreignfunded enterprises (SANZI) enjoy higher labor productivity and total factor productlvity (TFP) than domestic enterprises.Intra-firm diffusion of non-codified technology,proxied by ovwnership,is the main source of their better performance,whereas internally transferred codified technology makes little contribution to TFP.For state-owned enterprises,codified technology imports have significantly raised both labor productivity and TFP,but such positive effect is significantly dependent on the S&T human resource.In contrast,no evidence supports that introduction of foreign technology has enhanced the productivity in domestic nonstate-owned enterprises.The empirical results indicate that SANZI do not have a distinct advantage in their codified technology.In addition,inadequate investment in assimilation process and research and development together with inefficient management of science and technology activities,may impede the use of imported technology.

  17. Enterprise stent for waffle-cone stent-assisted coil embolization of large wide-necked arterial bifurcation aneurysms.

    Science.gov (United States)

    Padalino, David J; Singla, Amit; Jacobsen, Walter; Deshaies, Eric M

    2013-01-01

    Large wide-necked arterial bifurcation aneurysms present a unique challenge for endovascular coil embolization treatment. One technique described in the literature deploys a Neuroform stent into the neck of the aneurysm in the shape of a waffle-cone, thereby acting as a scaffold for the coil mass. This case series presents four patients with large wide-necked bifurcation aneurysms treated with the closed-cell Enterprise stent using the waffle-cone technique. Four patients (59 ± 18 years of age) with large wide-necked arterial bifurcation aneurysms (three basilar apex and one MCA bifurcation) were treated with the waffle-cone technique using the Enterprise stent as a supporting device for stent-assisted coil embolization. Three of the patients presented with aneurysmal subarachnoid hemorrhage (Hunt-Hess 2-3; Fisher Grade 3-4). There was no procedural morbidity or mortality associated with treatment itself. One aneurysm was completely obliterated, and three had small residual necks. One patient developed an area of PCA infarct and visual field cut one month after the procedure and required recoiling of the residual neck. The flared ends of the Enterprise stent remodeled the aneurysm neck by conforming to the shape of the neck without any technical difficulty, resulting in a stable scaffold holding the coils into the aneurysm. The closed cell construction, flexibility, and flared ends of the Enterprise stent allow it to conform to the waffle-cone configuration and provide a stable scaffold for coil embolization of large wide-necked arterial bifurcation aneurysms. We have had excellent initial results using the Enterprise stent with the waffle-cone technique. However, this technique is higher risk than standard treatment methods and therefore should be reserved for large wide-necked bifurcation aneurysms where Y stenting is needed, but not possible, and surgical clip ligation is not an option.

  18. Specifics of energy-saving technologies in electrical power supply systems of operating industrial enterprises

    OpenAIRE

    Кирисов, Игорь Геннадиевич; Овчаренко, Татьяна Ивановна

    2014-01-01

    В статье рассмотрены особенности разных энергосберегающих технологий, которые можно применить в системах электроснабжения промышленных предприятий. Проведены расчеты, подтверждающие целесообразность замены недозагруженных асинхронных двигателей на двигатели меньшей мощности. The paper deals with the speci cs of different energy-saving technologies that can be applied in electrical power supply systems of industrial enterprises. The paper presents calculations that corroborate ...

  19. Development of competitive strategy of the enterprises of agrarian and industrial complex

    Directory of Open Access Journals (Sweden)

    Dzhabbarova N. O.

    2016-04-01

    Full Text Available presented challenges and stages of the development process of marketing strategies for competitive agricultural enterprises, consider a system of competitive strategies are disclosed function to ensure their implementation.

  20. The Effect of Business Owners’/Leaders’ Cultural Values on The Strategic Behavior In Condition of Crisis: A Research on Small Enterprises In Istanbul Chamber of Industry

    Directory of Open Access Journals (Sweden)

    Binali Doğan

    2013-07-01

    The hypothesis which are about the relationship between cultural values of “Uncertainty Avoidance” and “Internal/External Orientation and strategic behavior are tested on the small enterprises of Istanbul Chamber of Industry.

  1. Air temperature gradient in large industrial hall

    Science.gov (United States)

    Karpuk, Michał; Pełech, Aleksander; Przydróżny, Edward; Walaszczyk, Juliusz; Szczęśniak, Sylwia

    2017-11-01

    In the rooms with dominant sensible heat load, volume airflow depends on many factors incl. pre-established temperature difference between exhaust and supply airflow. As the temperature difference is getting higher, airflow volume drops down, consequently, the cost of AHU is reduced. In high industrial halls with air exhaust grids located under the ceiling additional temperature gradient above working zone should be taken into consideration. In this regard, experimental research of the vertical air temperature gradient in high industrial halls were carried out for the case of mixing ventilation system The paper presents the results of air temperature distribution measurements in high technological hall (mechanically ventilated) under significant sensible heat load conditions. The supply airflow was delivered to the hall with the help of the swirl diffusers while exhaust grids were located under the hall ceiling. Basing on the air temperature distribution measurements performed on the seven pre-established levels, air temperature gradient in the area between 2.0 and 7.0 m above the floor was calculated and analysed.

  2. An Approach for R&D Partner Selection in Alliances between Large Companies, and Small and Medium Enterprises (SMEs: Application of Bayesian Network and Patent Analysis

    Directory of Open Access Journals (Sweden)

    Keeeun Lee

    2016-01-01

    Full Text Available The enhanced R&D cooperative efforts between large firms and small and medium-sized enterprises (SMEs have been emphasized to perform innovation projects and succeed in deploying profitable businesses. In order to promote such win-win alliances, it is necessary to consider the capabilities of large firms and SMEs, respectively. Thus, this paper proposes a new approach of partner selection when a large firm assesses SMEs as potential candidates for R&D collaboration. The first step of the suggested approach is to define the necessary technology for a firm by referring to a structured technology roadmap, which is a useful technique in the partner selection from the perspectives of a large firm. Second, a list of appropriate SME candidates is generated by patent information. Finally, a Bayesian network model is formulated to select an SME as an R&D collaboration partner which fits in the industry and the large firm by utilizing a bibliography with United States patents. This paper applies the proposed approach to the semiconductor industry and selects potential R&D partners for a large firm. This paper will explain how to use the model as a systematic and analytic approach for creating effective partnerships between large firms and SMEs.

  3. FORECASTING OF PRODUCTION OUTPUT FOR LIGHT INDUSTRY ENTERPRISES WITH PURPOSE TO DETERMINE THEIR POWER RESOURCES REQUIREMENTS. Part 1

    Directory of Open Access Journals (Sweden)

    V. N. Romaniuk

    2015-01-01

    Full Text Available The paper presents an interest for those specialists who are involved in solution of efficiency problems in light industry of Belarus as one of the significant industries that forms an economic situation in the Republic, its export potential and social climate. It is extremely relevant for the Belarusian enterprises to reduce production costs in order to preserve and strengthen positions in the light industry market. Operating capacities for production of natural, synthetic textile and knit-wear materials and their subsequent treatment are in many respects unjustifiably energy intensive. Nowadays the only acceptable solution of the problem for reduction of production costs is to decrease its energy component. Such approach requires transition to creation of modern heat and power supply systems at heat technology enterprises.The most important sub-system of the enterprises is own combined production of energy flows of secondary electrical and heat energy, freeze. There is a complex of problems that arise during designing process of tri-generation unit. One of the most important problems presupposes determination of a base load demand and capacity of every energy flow generated by an energy source. The solution is directly related to production output, which in its turn is determined by the requirements of sales markets. Due to various reasons the markets have their own specificity for the enterprises under consideration. It is proposed to use statistical methods for searching requirements. In this connection it is necessary to take into account industry development rate (pre-determined by State Programs, Plans, Governmental solutions, including directive instructions, production volumes of competitive goods and actual goods situation on the sales market.The paper presents the first part of the executed complex investigations which are directed on the development of scientifically-substantiated proposals for higher energy efficiency of the

  4. An empirical inquiry into the objective assessment and the top management perception of the need for organisational restructuring in large Croatian enterprises

    Directory of Open Access Journals (Sweden)

    Nikša Alfirević

    2000-01-01

    Full Text Available On the basis of the extensive empirical research, this paper examines the objective need for organisational restructuring in large Croatian enterprises versus the managerial perceptions of the same issue. Building upon the analysis of the economic performance of the Croatian large enterprise sector and the assessment of the organisational design quality in large Croatian enterprises, the urgency for further organisational restructuring is established. On the other hand, the major restructuring motives at the top management level are also examined, leading to the conclusion that both the perceived quality of the organisational design, as well as the perceived gap between the enterprise competitive ability and the threats from the business environment at the top management level do not support the further restructuring of the Croatian large enterprise sector.

  5. MODERNISATION OF THE ENTERPRISE AS AN INSTRUMENT FOR CONTROL OF ECOLOGICAL-HYGIENIC RISKS OF THE INDUSTRIAL CITY

    Directory of Open Access Journals (Sweden)

    Knyazev Dmitriy Konstantinovich

    2018-01-01

    Full Text Available Subject: ecological justification of modernization of the enterprise within the framework of formation/development of conditions for sustainable development of industrial city. Research objectives: selection of a complex of the technical and organizational decisions that allow us to reach target (permissible limits of dispersion of harmful emissions, thereby, having minimized the risks of damage to the environment and health of the population. Materials and methods: as primary materials, we used forms of the state statistical reporting “2tp-air”, volumes of maximum permissible emissions of the enterprise-the model site, data about technical and organizational decisions to reduce emissions to the atmosphere. The main methods of the research: geoinformation modeling, functional zoning, the structural analysis. Results: we simulated dispersion of priority pollutant of the leading source of construction dust emissions in the region, and we classified, by the degree of ecological and hygienic risk, the territory of the model site - town of Mikhaylovka. The activities to reduce the range of dispersion of harmful emissions are selected in the form of modernization of technological processes, installation of dust filters, improvement of the ventilation system, carrying out other organizational and technical activities to prevent the spread of dust on the territory of the enterprise and beyond. The environment protection effect of the activities proposed for realization is estimated. Proposals for further development of the analyzed industrial city are formulated. Conclusions: 1. The proposed solutions on modernization of the enterprise allow us to reduce the range of dust dispersion in concentrations that are more than maximum permissible concentration (MPC by 2.6 times (bringing them to the required limits; 2. The population living under the influence of dust in concentration of 0.5-1 MPC, for which there is a risk of long-term health effects, will

  6. KNOWLEDGE MANAGEMENT SYSTEM AS MEANS OF MOBILIZATION OF COMPETITIVE ADVANTAGES OF THE INDUSTRIAL ENTERPRISE

    OpenAIRE

    K. B. Dobrova; N. V. Kirichenko

    2013-01-01

    The article stresses the importance and urgency of implementing knowledge management systems for aviation enterprises to enhance the competitive advantages of aircraft. Conservation promotes knowledge management system (SMZ), developed and approved by the national standard of the Russian Federation GOST R 53894-2010 «Knowledge Management. Terms and definitions». A formula for the calculation of some indicators of competitiveness.

  7. Minimizing the risks and negative factors of the strategic management of industrial enterprise

    Directory of Open Access Journals (Sweden)

    Fedoretc Ksenia Sergeevna

    2012-06-01

    Full Text Available The article deals with the classification of risk areas of enterprise development, and assesses the negative factors. Developing new areas of strategic and operational activities. It creates software development innovation "new approach" focused on the reorientation of the company towards the market development of market mechanisms and approaches to the development.

  8. USUAL RUSSIAN ENGINEER: SOCIAL PORTRAITS OF SUBJECTS OF WORK IN THE INTERIOR OF THE SIBERIAN INDUSTRIAL ENTERPRISES

    Directory of Open Access Journals (Sweden)

    Kombarov V. Yu.

    2014-09-01

    Full Text Available At the base of sociological case study done at four Siberian enterprises of military-industrial complex was made a test to construct a typology of workers that vary for different types and trajectories or strategies of subjectivity and can be viewed as kind of continuum - trans-subjectivity - which is characterized by the absence of the subject or by its full manifestation. The relations between phenomenon of subjectivity of the workers and type of social structures of enterprises (organizations is the problem viewed in this article. The author supposes that in the modern tree-vertical-hierarchical structures dominates hypo-subjectivity of workers - phenomenon of the «death of the subject». An alternative is the rhizome structure which allows to «resurrect» the subject - productive worker and to reduce its firmly fixation in the system and to make his social action non-linear. At the base of sociological case study done at four Siberian enterprises of military-industrial complex was made a test to construct a typology of workers that vary for different types of subjectivity. Checking the evolution of interpretations of the concepts of «subjectivity» and «subject», the author concludes that a full-fledged social agent, the actor, the engine of historical and social processes is premature to write off, and that he may still have the main role in the context of transforming dynamics of contemporary social processes. Empirical referent of study and such an active acting, self-referential social agent capable of withstanding discourses of the power, as well as the pressure of capital and the prevailing social ethic machines are engineering and technical personnel of modern Russian industrial enterprises. Relevance in the study of the social stratum of workers due to the author's opinion, the need to enhance the most creative group of workers of the domestic industry, as the main social capital of productive economy, rebuilding and

  9. Bulgarian electricity market and the large-scale industrial customers

    International Nuclear Information System (INIS)

    Popov, P.; Kanev, K.; Dyankov, M.; Minkov, N.

    2003-01-01

    The paper focuses on a brief overview of the Bulgarian Electricity Market Design and steps toward its development, as well as on preliminary analyses for market opening and influence of large industrial customers to system and market operation. (author)

  10. Enterprise architecture for business success

    CERN Document Server

    Wijegunaratne, Inji; Evans-Greenwood, Peter

    2014-01-01

    Enterprise Architecture (EA) has evolved to become a prominent presence in today's information systems and technology landscape. The EA discipline is rich in frameworks, methodologies, and the like. However, the question of 'value' for business ;professionals remains largely unanswered - that is, how best can Enterprise Architecture and Enterprise Architects deliver value to the enterprise? Enterprise Architecture for Business Success answers this question. Enterprise Architecture for Business Success is primarily intended for IT professionals working in the area of Enterprise Architectu

  11. Efficiency Assessment of the Power Supply System of an Industrial Enterprise Through the Assessment of the Modes of Electric Power Consumption

    Science.gov (United States)

    Miatishkin, Gennadii V.; Filinova, Anastasiia S.

    2018-01-01

    The paper reviews the terms of the rational consumption and distribution of the energy resources at an enterprise. The authors analyze the significance and the effect of the change of the profile of the energy consumption per hour by the enterprise. The text explores the factors influencing the discipline of the planned electricity and power consumption. The authors present a calculation of the weighted average deviations for consumers and the terms of their assessment. The authors make conclusions concerning the rationality of the means of defining the energy efficiency system through the assessment of the modes of electric energy consumption of an industrial enterprise.

  12. INTEGRATION OF THE SYSTEM OF TAX MANAGEMENT IN THE ORGANIZATIONAL STRUCTURE OF INDUSTRIAL ENTERPRISES (ORGANIZATIONS

    Directory of Open Access Journals (Sweden)

    L. A. Tchaikovskaya

    2010-01-01

    Full Text Available The article describes the basic elements, principles, procedures and methods of tax management, which must be integrated into the organizational structure of enterprises. Consideration of ways to optimize the taxation proposed in the context with the ability to self-identify tax risk businessesand evaluation of different directions simulations, to avoid such risks. Discusses how to optimize tax obligations in recognition of the rights of each enterprise to use all legal means, techniques and methods (including gaps in the legislation in order to minimize their tax liabilities. Management methods used by the tax impact on taxation will be used to harmonize the interests of the state and the taxpayer as an integral part of financial management company.

  13. Sanitary Norms of the Design of Industrial Enterprises. SN 245-71.

    Science.gov (United States)

    1979-07-09

    Plants of feed 4ntibiotics. 3. Fish trades. 4. Cattle bases to 1000 heads of given cattle. 5. Shops for production of ferments with surface method of...sirloin with scrap processing shops, fisheries. 9. Shops for production of ferments with deep method of cultivation. 10. Beet sugar plants without pulp...zone by size/dimension 50 a. 1. Confectionery factories. 2. Production of table vinegar . 3. Enterprises tobacco-lov-grade tobacco (tobacco

  14. KNOWLEDGE MANAGEMENT SYSTEM AS MEANS OF MOBILIZATION OF COMPETITIVE ADVANTAGES OF THE INDUSTRIAL ENTERPRISE

    Directory of Open Access Journals (Sweden)

    K. B. Dobrova

    2013-01-01

    Full Text Available The article stresses the importance and urgency of implementing knowledge management systems for aviation enterprises to enhance the competitive advantages of aircraft. Conservation promotes knowledge management system (SMZ, developed and approved by the national standard of the Russian Federation GOST R 53894-2010 «Knowledge Management. Terms and definitions». A formula for the calculation of some indicators of competitiveness.

  15. Enterprise risk management implementation : perceptions of risk practitioners in the South African mining industry

    OpenAIRE

    2013-01-01

    M.Comm. (Financial Economics) Enterprise risk management (ERM) is emerging as a risk management methodology that is seemingly superior to that of traditional, silo-based risk management. Although ERM implementation is on the increase, research into ERM is still limited. There is, for instance, a lack of clarity within the literature regarding which factors lead to companies embracing ERM, as well as a lack of consensus on ERM’s benefits. The purpose of this study was therefore to explore t...

  16. The problems of professional training of practice-oriented specialists for small enterprises of footwear and leather production industries in Uzbekistan

    Science.gov (United States)

    Ilkhamova, M. U.; Gafurov, J. K.; Maksudova, U. M.; Vassiliadis, S.

    2017-10-01

    At the present, the State authorities of the Republic of Uzbekistan pay special attention to the development of small and medium businesses and, in particular, to the enterprises oriented on manufacturing products with high added value. The leather and footwear industry of Uzbekistan is one of the dynamically developing sectors of economy. However, the study of the situation demonstrates that the increase in number of small and medium footwear and leather enterprises that have taken place in recent years, is not accompanied by a formation of corresponding professional training system for the enterprises, especially for associate specialists. The analysis of the legal base disclosed that the professional training level in footwear industry enterprises does not meet the up-to-date manufacturing requirements. The study is devoted to the issues of professional training of practice-oriented staff - the specialists for small enterprises of footwear and leather industry. The main task is the development of new vocational courses and programs for the training and professional development of personnel at all levels. The basic stages of complete staff training cycle for footwear sector have been determined based on the practical experience of staff training for small footwear enterprises in Greece. The 3-6 months duration short-term courses recommended for associate and medium level specialists have been developed and evaluated.

  17. Thirty five years of COIG - information science in service of progress. [Central Calculation Office for Coal Industry Enterprises, Poland

    Energy Technology Data Exchange (ETDEWEB)

    Heblinski, J.

    1985-12-01

    Development is evaluated for the COIG (Central Calculation Office for Coal Industry Enterprises), founded in 1950. In the first phase of its activities the Office concentrated on preparation of statistical data on coal industry in Poland. Range of activities was enlarged in 1969 after the ICL 1904S computer was installed. In 1975 CIOG was transformed into a research institute. CIOG consists of a central unit in Katowice and 7 branches. It has 1600 employees (including 96 researchers). CIOG develops computerized control systems and information systems for coal mining (19 information systems have been developed). The Office analyzes coal reserves, efficiency of coal mining, coal losses, resource conservation, mining systems, energy consumption in mining. It also coordinates development of computerized control systems in mines and organizes training for coal mine personnel.

  18. An Integrative Model of the Strategic Management Accounting at the Enterprises of Chemical Industry

    Directory of Open Access Journals (Sweden)

    Aleksandra Vasilyevna Glushchenko

    2016-06-01

    Full Text Available Currently, the issues of information and analytical support of strategic management enabling to take timely and high-quality management decisions, are extremely relevant. Conflicting and poor information, haphazard collected in the practice of large companies from unreliable sources, affects the effective implementation of their development strategies and carries the threat of risk, by the increasing instability of the external environment. Thus chemical industry is one of the central places in the industry of Russia and, of course, has its specificity in the formation of the informationsupport system. Such an information system suitable for the development and implementation of strategic directions, changes in recognized competitive advantages of strategic management accounting. The issues of the lack of requirements for strategic accounting information, its inconsistency in the result of simultaneous accumulation in different parts and using different methods of calculation and assessment of indicators is impossible without a well-constructed model of organization of strategic management accounting. The purpose of this study is to develop such a model, the implementation of which will allow realizing the possibility of achieving strategic goals by harmonizing information from the individual objects of the strategic account to increase the functional effectiveness of management decisions with a focus on strategy. Case study was based on dialectical logic and methods of system analysis, and identifying causal relationships in building a model of strategic management accounting that contributes to the forecasts of its development. The study proposed to implement an integrative model of organization of strategic management accounting. The purpose of a phased implementation of this model defines the objects and tools of strategic management accounting. Moreover, it is determined that from the point of view of increasing the usefulness of management

  19. The Industrial Vocational High School Teacher Training Program Cooperating with the Enterprises.

    Science.gov (United States)

    Chi, Cheng-Feng

    Training of vocational education teachers should be closely linked to the industries in which the teachers are preparing to instruct students. A teacher training program in Taiwan has been designed with the cooperation of the metals manufacturing industry. In this four-year program, students are assigned to the industry to learn the product…

  20. Factors Influencing Sustainable Entrepreneurship in Small and Medium-Sized Enterprises in Iran: A Case Study of Food Industry

    Directory of Open Access Journals (Sweden)

    Gholamhossein Hosseininia

    2016-10-01

    Full Text Available This study sought to establish the social and environmental factors that influence sustainable entrepreneurship (SE in Small- and medium-sized enterprises (SMEs. It also attempted to identify whether the demographic background of the entrepreneur influences the SE in SMEs of the Iranian food industry. A mixed method approach, employing the use of questionnaires and interviews from a sample size of approximately 130 participants and 12 owner-managers of SMEs in food industry, was used to collect data. Data were analyzed using descriptive statistics and several inferential analyses. Findings showed that certain characteristics of the entrepreneur, including work experience and education, have a significant impact on SE. Furthermore, out of the eight identified factors, according to the participants’ perception, the most important factors towards sustainable performance of SMEs in food industry are social factors, including customer orientation, as well as human resources and environmental factors, including recycling and the future of Earth. This research paper concludes that considering the social and environmental aspects of sustainability and employing experienced staff would majorly contribute to the pursuit of SE in SMEs of food industry.

  1. The Historical Evolution and Current Interpretation of the Definition of Essence of the Category of «Competitiveness of Enterprise of the Automobile Industry»

    Directory of Open Access Journals (Sweden)

    Shevchenko Inna Yu.

    2018-01-01

    Full Text Available The article is aimed at researching the historical evolution and a current interpretation of the definition of essence of the category of «competitiveness of enterprise of the automobile industry». Using the monographic analysis, the article reviews the historical evolution of the definition of essence of the category of «competitiveness of enterprise» in the national scientific literature in the period from 2007 to 2016. It has been concluded that the essence of the concept of «competitiveness of enterprise» is actually reduced to the competitiveness of products or operational efficiency. The author’s own definition of the essence of the category of «competitiveness of enterprise of the automobile industry» has been suggested: it has been specified that under the given term be understood «...the dynamic ability of enterprise of the automobile industry to ensure the efficiency of all activities as result of interaction of the internal competitive potential and the external competitive environment factors in accordance with the chosen competitive strategy at a certain stage of the life cycle».

  2. The Methodological Foundations of the Economic Evaluation of the Level of Intensification of the Innovative Processes at Industrial Enterprise in the Part of Technical-Technological Subsystem

    Directory of Open Access Journals (Sweden)

    Plakhotnik Olena О.

    2017-04-01

    Full Text Available Regularities of technocratic changes define the change of technological methods of production and technological modes at the level of the stages of development of a production enterprise. An important role occupies the commercialization of technical-technological innovation. The article allocates the directions of impact on commodity markets and the production enterprises, which are operating there. It is using the exclusive rights tool will meet the challenges of changes in the structure of the national economy so as to increase the level of its competitiveness on the world market. The article proposes the improved methodological approach to forming a system of analytical indicators for evaluating the economic efficiency of the level of intensification of the technical-technological innovation processes at industrial enterprise, based on reasonable conditions and factors of innovation development of industrial enterprise, models of quantitative measuring the efficiency of innovative projects. Applying this approach would improve the efficiency of use of the technical-technological innovations of the industrial enterprises, having increased the profitability of intellectual activity.

  3. Female Employment in Military Industrial Complex Enterprises of Post-Soviet Russia

    Directory of Open Access Journals (Sweden)

    Oxana A. Demchenkova

    2013-12-01

    Full Text Available Reforms in Russian industry caused by disintegration of the USSR had a strong negative effect on military-industrial complex. Pre-reform Russian economy possessed a powerful efficient system of high-tech industries with defense industry being a core of the system in view of the government tasks which defense industry should effectively respond to. The defense industry accumulated elite of the labor force, highly skilled and educated workers. Socioeconomic and political transformation in Russian society resulted in significant qualitative and quantitative changes in human capital of military-industrial complex. The number of employees was cut down. Highly skilled workers turned out to be unemployed. In tough competition for working places caused by contraction of industrial production women turned out to be in the most vulnerable position. In this article results of the survey and documents analysis conducted by the author are looked at with gender perspective. The aim is to identify the basic trends in female employment in military-industrial complex of post-Soviet Russia. Job security, level of wages and managerial career chances for women are considered.

  4. FORECASTING OF PRODUCTION OUTPUT FOR LIGHT INDUSTRY ENTERPRISES WITH PURPOSE TO DETERMINE THEIR POWER RESOURCES REQUIREMENTS. Part 2

    Directory of Open Access Journals (Sweden)

    V. N. Romaniuk

    2015-01-01

    Full Text Available The proposed paper is a continuation of the work, published in the previous issue. It is destined for specialists who are engaged in solution of problems pertaining to efficiency of light industry in Belarus which is considered as one of the branches being significantly involved in formation of national economy, its export potential and social climate. It is extremely relevant to reduce production costs in order to preserve and add strength to the branch positions in the markets. Production of natural, synthetic and knitted materials and their subsequent treatment are unreasonably power-consuming processes. Fundamental solution of the problem for reduction of production costs is to decrease its energy component and this can be achieved due to transition to modern heat and power systems in technological complexes of enterprises.The first part of the paper has considered a range of issues that served as a basis for obtaining statistical models in order to forecast the required production volume of main knitted and textile materials.  Forecasting has been prepared   for a period of more than 20 years because it has been predetermined by development horizon of comprehensive modernization of energy supply systems at enterprises of light industry. The production volumes essentially differ from those that have been stipulated in the programs of light industry.The present paper shows selection of statistical game-type for determination of  build-up rate of the production volume for every textile enterprise. The so-called “Game with Nature” has been selected as a game which is widely used for solution of analogous demand problems. The statistical forecasting models of production obtained in the first part are applied in the second part of the paper which considers strategies for development of individual enterprises. JSC :Baranovichi Industrial Cotton Association” has been taken an example in the paper. Production volumes of any enterprise are

  5. Selected Determinants of Coopetition of Industrial Enterprises in South-Western Poland in 2009–2011

    Directory of Open Access Journals (Sweden)

    Tomaszewski Marek

    2014-06-01

    Full Text Available When studying literature on the issue coopetition it may be found that this issue has become more and more popular in recent years. However, this finding was not confirmed in economic practice. Reluctance or concerns about coopetition result from caution and distrust of Polish entrepreneurs in relation to other players on the market. In the previous socio-political conditions this approach was successful. However, the current situation forces small and medium-sized enterprises to draw attention to the strategy of “sleeping with the enemy.” In this context, the objective of the study was to answer the question of what factors influence establishing coopetition in south-western Poland in a simulative or detrimental way.

  6. Innovation in Enterprises in Process of Merge: a study of services and industry companies

    Directory of Open Access Journals (Sweden)

    Patricia Gonçalves Vidal

    2014-08-01

    Full Text Available The current article presents the innovation process in companies which have adopted as strategy the value creation and synergies through merger with other companies. From a theoretical foundation it aims to shed light on the theme by presenting basis to this research and the ensuing result analysis. Thus were analyzed companies from two diverse sectors of the Economy with the endeavor to prove “how” and “why” such innovation before the merger process happened and which the possible results from this analysis are. By using secondary sources, with the goal to present real and instant results of the innovation announcements of the studied enterprises, through cases and event studies, it is concluded that innovation in products and in partnerships create higher value than other sorts of innovation in short term and in the post-merger.

  7. Adaptive inventory management system of an industrial enterprise in the unsteady market environment

    Directory of Open Access Journals (Sweden)

    Dzenzelyuk N.

    2017-01-01

    Full Text Available The article examines the features and problems of methodology of formation of inventory management in a volatile market environment. Currently, there was a need to change the development paradigm of the scaling operations to the more efficient use of resources and capital. In this regard, the high importance of the newly received inventory control problem as an essential component of enterprise resources. The author sets out the basic methodological principles of inventory management systems. The article from the standpoint of the theory of systems and automatic control systems proposed structure adaptive inventory management system. As a criterion of the effectiveness of the joint action is considered the minimum criterion of total costs and expenses associated with the unmet demand. The simulation results confirm the efficiency of the developed model under unforeseen and significant fluctuations in the parameters of stochastic demand.

  8. Modeling of industrial stream and resources of machine-building enterpriser complex of wood preparation

    Science.gov (United States)

    Sereda, T. G.; Kostarev, S. N.

    2018-03-01

    Theoretical bases of linkage of material streams of the machine-building enterprise and the automated system of decision-making are developed. The process of machine-building manufacture is submitted by the existential system. The equation of preservation of movement is based on calculation of volume of manufacture. The basis of resource variables includes capacities and operators of the equipment. Indignations such as a defect and failure are investigated in the existential basis. The equation of a stream of details on a manufacturing route is made. The received analytical expression expresses a condition of a stream of movement of details in view of influence of work of the equipment and traumatism of the personnel.

  9. The model and the planning method of volume and variety assessment of innovative products in an industrial enterprise

    Science.gov (United States)

    Anisimov, V. G.; Anisimov, E. G.; Saurenko, T. N.; Sonkin, M. A.

    2017-01-01

    In the long term, the innovative development strategy efficiency is considered as the most crucial condition for assurance of economic system competitiveness in market conditions. It determines the problem relevance of such justification strategies with regard to specific systems features and conditions of their operation. The problem solution for industrial enterprises can be based on mathematical models of supporting the decision-making on the elements of the innovative manufacturing program. An optimization model and the planning method of innovative products volume and variety are suggested. The feature of the suggested model lies in the nonlinear nature of the objective function. It allows taking into consideration the law of diminishing marginal utility. The suggested method of optimization takes into account the system features and enables the effective implementation of manufacturing capabilities in modern conditions of production organization and sales in terms of market saturation.

  10. Comment on the critique of the paper 'ERP and management accounting changes of industrial enterprises in Serbia'

    Directory of Open Access Journals (Sweden)

    Malinić Slobodan

    2012-09-01

    Full Text Available The aim of the paper 'ERP and Management Accounting Changes of Industrial Enterprises in Serbia' was to investigate one specific aspect of management accounting, precisely the changes of management accounting under the influence of modern information technologies. Therefore, our aim was neither to criticize nor to promote SAP (or some other ERP software. SAP is one of the best, most popular and most widely accepted ERP software in Serbia. That was the main reason for choosing SAP for our research. The main objective of this Comment is an attempt to point out the differences in expressed opinions, which are mainly the result of different ideas and aspects of the analysis and points of view of our paper. We consider the mentioned critique to be well-intentioned and useful, primarily for the authors of the paper, but also for the users of the results of our paper, as well as the reputation of the journal Industrija.

  11. The hydrodynamic dust retention modeling process with a foam layer for open linear dynamic technological systems at construction industry enterprises

    Directory of Open Access Journals (Sweden)

    Bespalov Vadim

    2017-01-01

    Full Text Available The physical essence of the reducing air pollution hydrodynamic method by means of the foamy method as the most effective dust retention technology for open long sources at construction industry enterprises is presented in the article. The mathematical description of this technology has been performed, taking into account the physical and chemical properties of the dust and foam bubble, as well as the parameters of the return of dust particles to technological raw material due to various physical mechanisms for their capture. The obtained parametric dependence of dust retention efficiency provides the possibility of its predicted calculation as a resultant parameter for the considering technology, taking into account the interaction of dust with a foam layer.

  12. Eco-geochemical peculiarities of mercury content in solid residue of snow in the industrial enterprises impacted areas of Tomsk

    Science.gov (United States)

    Filimonenko, E. A.; Lyapina, E. E.; Talovskaya, A. V.; Parygina, I. A.

    2014-11-01

    Snow, as short-term consignation Wednesday, has several properties that lead to its widespread use in ecologicalgeochemical and geological research. By studying the chemical composition of the dust fallout you can indirectly assess the condition of atmospheric air.1-2. Determining the content of mercury in snow cover, you can define its contribution for the longest period of the year in our region, with the most intensive use of various types of fuel (coal, gas, firewood), that puts a strain on urban ecosystems in terms of ecology.3-4. In addition, snow cleans the atmosphere of mercury, but it accumulates in the snow, and during the spring melting of snow hits the ground and rivers, polluting them. Part of the mercury back into the atmosphere. It should also be note the special nature of the circulation of air masses over the city in winter, creating a heat CAP, which contributes to air pollution of the city. 5-6-7. The high load areas of industrial impact were detected during the eco-geochemical investigations of mercury load index in the impacted areas of enterprises of Tomsk. It was found out, that aerosol particles of industrial emissions in Tomsk contain mercury. The contamination transfer character of mercury sources and occurrence modes of pollutants in snow solid residue were detected during the researches of industrial impact.

  13. ANALYSIS OF EXTERNAL ENVIRONMENTAL FACTORS AT THE FOOD INDUSTRY ENTERPRISES OF THE REPUBLIC OF ARMENIA

    Directory of Open Access Journals (Sweden)

    Sergey G. Sargsyan

    2013-01-01

    Full Text Available The main components of the external environment, which have a key influence on the economic activities of organizations in the food industry, are discussed in the article. The influence of certain external environment factors is examined by the example of the Republic of Armenia with taking into account the characteristics of the industry. The rates of development, the leading market indicators are analysed, as well as the key components that form the socio-economic system of the industry are considered.

  14. Editorial: Enterprise Participation (January 2009

    Directory of Open Access Journals (Sweden)

    Donald Smith

    2009-01-01

    Full Text Available In The Role of Participation Architecture in Growing Sponsored Open Source Communities, Joel West and Siobhan O'Mahony argue that "to some extent, firms and technical communities have always collaborated to create standards, shared infrastructure, and innovation outcomes that are bigger than any one firm can achieve." and that "there is increasing evidence that path breaking innovations cannot occur without a community to interpret, support, extend and diffuse them". When considered in this light, it should not be surprising that more enterprises, both large and small, are increasing their participation in open source communities to drive innovation. The theme for this month's issue of the OSBR is enterprise participation and the authors provide practical advice for effective enterprise/community collaboration. Their experiences provide perspectives on: i the Eclipse Foundation, which maintains an ecosystem of over 150 enterprises that participate in Eclipse open source projects; ii an independent software vendor that sells closed source solutions constructed on top of an open source platform to large enterprise customers; iii the impact of major players collaborating on a common open source platform for the mobile industry; iv the role users can play in the very large (over 14 million GNOME community; and v the lessons a scientist from the National Research Council of Canada learned when he released software and started a small open source community.

  15. Planning Change of the Type of Economic Development of Enterprises of the Dairy Industry with Consideration of Influence of the Competitive Environment

    Directory of Open Access Journals (Sweden)

    Kulynych Yuriy M.

    2013-12-01

    Full Text Available The article justifies a necessity of transition of dairy industry enterprises to the intensive type of economic development. It offers a mathematical model of transition to the intensive type of development. The model is build on the basis of the well-known methods. The author offers two variants of formation of the intensive type of development during the period of planning. Pursuant to the first variant, it is planned to increase expenditures of an enterprise during the period of planning, pursuant to the second – to reduce expenditures of the period of planning compared to the basic one. The author considers and analyses the essence of the innovation strategy of dairy enterprises and offers a model of formation of such a strategy at an enterprise. The article considers main problems that suppress investment activity in the country. The author focuses, in particular, on the following: inconsistent investment policy of the state in the food sphere, poorly developed innovation infrastructure, monopoly of reporcessors in the dairy products markets and low level of profitability of dairy enterprises. In conclusion the author offers measures on formation of investment attractiveness of the dairy industry.

  16. Associations between Job Strain and Arterial Stiffness: A Large Survey among Enterprise Employees from Thailand

    Directory of Open Access Journals (Sweden)

    Orawan Kaewboonchoo

    2018-04-01

    Full Text Available As an intermediate endpoint to cardiovascular disease, arterial stiffness has received much attention recently. So far, the research on work stress and arterial stiffness is still sparse and inconsistent, and no investigations on work stress and cardiovascular health among the Thai working population have been reported. Therefore, we conducted an epidemiological study among 2141 Thai enterprise employees (858 men and 1283 women who were free from any diagnosed cardiovascular disease. Work stress was measured using Karasek’s Job Demand–Control model for job strain (a combination of high demand and low control. Arterial stiffness was evaluated by a non-invasive approach using pulse-wave analysis based on a finger photoplethysmogram. Multivariable linear regression was applied to examine associations between job strain and arterial stiffness. In men, job strain was significantly associated with arterial stiffness (β  =  0.078, 95% confidence interval  =  0.026 to 0.130, after accounting for sociodemographic, behavioral, dietary and biomedical factors. However, the association in women was not significant. As the first study in Thailand on work stress and cardiovascular risk, we found that job strain might be an important risk factor for cardiovascular disease among Thai working men. Further studies with longitudinal design are warranted.

  17. Methodology for Management of Information Security in Industrial Control Systems: A Proof of Concept aligned with Enterprise Objectives.

    Directory of Open Access Journals (Sweden)

    Fabian Bustamante

    2017-04-01

    Full Text Available This article is an extended version of the study presented at the IEEE Ecuador Technical Chapters Meeting (ETCM-2016. At that time, a methodological proposal was designed, implemented, and applied in a group of industrial plants for the management of the information security of the Industrial control systems (ICS. The present study displays an adaptation and improvement of such methodology with the purpose of aligning the proposal for the effective management of information security with the strategic objectives. The development of this study has been divided into three distinctive phases. Firstly, we induced the articulation of PMI-PMBOK v5 and ITIL v3 both for the management of the project and for the verification of risks in the IT services. Second, we applied a set of risk mitigation strategies based on international standards as NIST 800-82 and 800-30. Thirdly, we assembled the two mentioned phases in a Guide for standards-based instructions and security policies, which previously have been encouraged on NIST 800-82, 800-53 and 800-12. Hereby, we observed the reduction of incidents of information security, the correct delimitation of the functions of the direct responsible of the ICS and the improvement of the communication between the operative and technical areas of the involved companies. The results demonstrate the functionality of these improvements, especially in the context of the availability and integrity of information, which generates an added value to the enterprise.

  18. Impacts of Large Scale Wind Penetration on Energy Supply Industry

    Directory of Open Access Journals (Sweden)

    John Kabouris

    2009-11-01

    Full Text Available Large penetration of Renewable Energy Sources (RES impacts Energy Supply Industry (ESI in many aspects leading to a fundamental change in electric power systems. It raises a number of technical challenges to the Transmission System Operators (TSOs, Distribution System Operators (DSOs and Wind Turbine Generators (WTG constructors. This paper aims to present in a thorough and coherent way the redrawn picture for Energy Systems under these conditions. Topics related to emergent technical challenges, technical solutions required and finally the impact on ESI due to large wind power penetration, are analyzed. Finally, general conclusions are extracted about the ESI current and future state and general directions are recommended.

  19. Strategic Management of Development of the Military-Industrial Complex Enterprises with the Use of Dual Technologies under the Resource-Based Approach

    Directory of Open Access Journals (Sweden)

    Petr Mikhailovich Brovko

    2016-07-01

    Full Text Available The main goal of the present study is to consider the specifics of current state and strategic management of development of enterprises within the military-industrial complex in the dynamic environment of the global market and determine the most effective ways of their development on the example of Russian helicopter industry. Methodology and tools of the study are based on the comparison and comparative evaluation of major Russian and foreign corporations engaged in development and production of helicopters. The authors analyze current state and strategic management of the helicopter industry on the basis of information available in the public domain. The source of the main problems of functioning of military-industrial complex enterprises, in particular, in the helicopter industry, can be found in the specifics of strategic management of its development, which is determined by major holdings under the close supervision of the government. One of the most important ways to develop enterprises of this industry is to diversify civil production in order to increase the output and improve the financial situation and, on the other hand, to reduce the dependence of enterprises on the state defense order. The development of dual-use technology and production of dual-use products makes it possible not only to maintain a powerful military-industrial complex, but also to accelerate the development of the economy as a whole. The authors of the paper put forward an algorithm of formation of an optimum strategy for diversification of production through the use of “dual technologies”. The profit obtained from the sales of products produced on the basis of “dual-use technology” will compensate for some of the military expenditures

  20. Consistency and Variability in Talk about "Diversity": An Empirical Analysis of Discursive Scope in Swiss Large Scale Enterprises

    Directory of Open Access Journals (Sweden)

    Anja Ostendorp

    2009-02-01

    Full Text Available Traditionally discussions of "diversity" in organizations either refer to an ideal "management" of a diverse workforce or to specific concerns of minorities. The term diversity, however, entails a growing number of translations. Highlighting this diversity of diversity, the concept cannot be merely conceived of as either social-normative or economic-functional. Therefore, the present study empirically scrutinizes the current scope of diversity-talk in Swiss large scale enterprises from a discursive psychological perspective. First, it provides five so-called interpretative repertoires which focus on: image, market, minorities, themes, and difference. Second, it discusses why and how persons oscillate between consistency and variability whenever they draw upon these different repertoires. Finally, it points out possibilities to combine them. This empirical approach to diversity in organizations offers new aspects to the current debate on diversity and introduces crucial concepts of a discursive psychological analysis. URN: urn:nbn:de:0114-fqs090218

  1. Measurements of Tenorm in an enterprise related with the petroleum industry

    International Nuclear Information System (INIS)

    Gnoni, G.; Canoba, A.

    2006-01-01

    Some industries in its processes concentrate natural radionuclides. Among these industries are the industry of the gas and the petroleum. These materials naturally radioactive concentrated by certain industries are known as TENORM (technologically enhanced naturally occurring radioactive material). As part of a project that has by objective to determine possible contaminations with TENORM materials in the industry, it was carried out an evaluation to a company related with the oil industry. The company provides teams and systems used in the production wells. In the plant it proceeds to the armed one with new components or with recovered parts of used equipment. Its were carried out measurements of dose rate in the place. In the first place it was carried out a screening monitoring, in order to detect hot points. In those cases in that hot points were not detected, pieces were selected to measure in contact, considering it origin, function and visual inspection of the same ones. The measured dose rate in most of the pieces was inside the radiation bottom levels. Its were found some pieces with greater dose rates at the bottom and only isolated cases that were up to ten times greater to the same one. The annual effective dose estimated in preservative form, only considering the external exposure via, starting from the most high value measured was similar to 0.6 mSv.a -1 , value far from the one dose limit settled down for workers (20 mSv.a -1 ) and also smaller to the one dose limit settled down for public (1 mSv.a -1 ). Its took oily crusts samples, wash water, and cleaning sands for the later analysis in the laboratory. The samples were analyzed by gamma spectrometry and the uranium concentration by fluorimetry. Starting from the measurements carried out in the laboratories, it was confirmed that the involved radionuclides are the Ra-226 and Ra-228 and that the uranium doesn't concentrate on the present inlays in the pieces analyzed, in agreement with the fact that

  2. Internationalization of Small and Medium Enterprises in the Halal Food Industry

    OpenAIRE

    Ho, Kwok Kheong

    2011-01-01

    Internationalization topics have been widely discussed in past literature. This research has been created to complement internationalization researches around the world and the aim of it is to find out barriers faced by Malaysian SMEs in particular of those in the Halal food industry and the strategies undertaken to overcome the barriers. The research also has a brief overview on the internationalization theories including those that are in the rapid internationalization category. The overvie...

  3. Redistribution of tasks among the industrial enterprises dealing with the nuclear fuel cycle

    International Nuclear Information System (INIS)

    Warrikoff, A.

    1990-01-01

    From the dubious events within the nuclear industry at Mol and Hanau resulted the imperative necessity of restructuring various sections. The concept established by the Federal Government provides for both nuclear transportation and the conditioning of radioactive wastes being concentrated each in one hand, as far as possible, namely the Federal Railways and the Nuclear Service Society - new. The present paper makes critical comments about the overall situation and the reorganization concept. (UA) [de

  4. The Applied Aspects of Transposition and Integration of Development Resources in the System of Strategic Management of the Pharmaceutical Industry Enterprises

    Directory of Open Access Journals (Sweden)

    Mykhailiuk Myroslava О.

    2018-02-01

    Full Text Available The article is aimed at researching the transposition and integration of development resources in the system of strategic management of pharmaceutical enterprises. It has been determined that in the current of market functioning, resources are transformed into development resources. The proposed scheme of transposition and integration of development resources in the system of strategic management of enterprises provides a combination of resource opportunities of company with market conditions and reflects synergistic interaction between two classical theories of strategic management: the M. Porter’s sectoral competition theory and the resource theory. The basic priorities of development of the pharmaceutical industry in the contemporary market environment are defined and trends of activity of pharmaceutical companies are indicated. Enterprises are distributed according to the criterion of introduction of development resources strategy, measures on increase of efficiency of their activity are suggested.

  5. Improving technology universal vegetable semi-finished products for the enterprises of food industry

    Directory of Open Access Journals (Sweden)

    M. N. Kutkina

    2016-01-01

    vegetables, the softening of which are caused by changes in protopectin cellulose and middle lamellae of cells. The result of this study helped to develop the recipes and technology of a universal semifinished product from zucchini for enterprise of catering.

  6. ENDOCRINE-METABOLIC PATHOLOGY IN CHILDREN OF FEMALE WORKERS ON NUCLEAR INDUSTRY ENTERPRISE

    Directory of Open Access Journals (Sweden)

    S. F. Sosnina

    2017-01-01

    Full Text Available The study of deviations in health status of children whose parents were exposed to radiation on production enterprise is important for radiation safety of people of reproductive age and their subsequent generations.The purpose of the study: the analysis of endocrine-metabolic pathology in the offspring of female workers of nuclear production, which had accumulated preconceptual doses of external gamma-irradiation.Material and methods: Retrospective data analysis of medical records of 650 children under 15 years old was carried out, 130 of whom were the offspring of mothers exposed to radiation in the workplace. Methods of nonparametric statistics were applied. To identify latent factors, factor analysis by the main component method was used.Results: The range of preconceptive doses of external gamma irradiation to mothers’ gonads was 0.09–3523.7 mGy, the average absorbed dose for gonads was 423.2±52.2 mGy. The structure of the class «Endocrine, nutritional and metabolic diseases» among the descendants of irradiated and intact mothers did not significantly differ. There was predominance of rickets, malnutrition among infants in both groups. Iodine-deficiency-related thyroid disorders were most frequently recorded in the structure of thyroid gland diseases without statistically significant differences in the groups. The gender dependence was noted: endocrine-metabolic pathology occurred in girls by 1.8 times more often than among boys. Frequent occurrence of polypathies and secondary endocrine pathology were indicated in the group of children of irradiated mothers. Factor analysis in study group identified four factors characterizing the antenatal period in children (19.4% of the variance, obstetric-gynecologic anamnesis (14.1% of the variance, mothers’ bad health habits (10.6% of the variance and preconceptional external gamma-radiation exposure of female workers (9.6% of the variance.Conclusion: The features identified in the analysis

  7. The enterprise localization and industrial movement in Teruel (Spain during the period 1992-1998

    Directory of Open Access Journals (Sweden)

    Juan Carlos Ramon-Solans

    2007-07-01

    Full Text Available The aim of this text is to demonstrate the nature of the process of industrial change taking place in the Teruel economy during the period 1992-1998. The text forms part of a research project centred on pinpointing the most dynamic sector in Teruel and then analysing them in terms of which factors and variables have most influenced the choice of the location of business in certain areas of Teruel. The most dynamic sectors for the period 1992-1998 were selected from the official Register of Industrial Establishments. A total of 640 companies were created during the period 1992-1998. A sample of 84 new and expanding companies from the fastest growing sectors was then selected. These companies were sent a questionnaire between April and June 2000. The results obtained are analysed and compared to other studies carried out at a national level. Using this data a TOWS or FODA analysis was made of competitive advantages and disadvantages in Teruel in terms of industrial movement, sectorial-productivity structure and location variables.

  8. Regional innovative and investment processes analysis and their impact on food-industry wine-producing enterprises development in Odessa region

    Directory of Open Access Journals (Sweden)

    Bondarenko Svitlana Аnatoliyivna

    2016-02-01

    Full Text Available The article deals with the study of state of winemaking sector, trends of innovative development of industrial enterprises of Ukraine and Odessa region are analyzed and based on this the characteristic patterns and main shortcomings are identified. The regional innovation and investment processes are anylyzed, the nature of its influence on development of wineries in food industry of Odessa region is identified. It is proved that the regulatory impact on development of viticulture and wine-making should focus on conditions and behavior of industry enterprises and directly or indirectly affect the efficiency of its business processes. One of management tools of socio-economic development of regions is regulation of innovation and investment processes, strict control over the use of targeted funds for program solving of region develoment priorities.

  9. Shaping a novel security approach in chemical industrial clusters to prevent large-scale domino events

    NARCIS (Netherlands)

    Reniers, Genserik L L; Dullaert, Wout; Soudan, Karel

    2009-01-01

    Two aspects are important when it comes to guaranteeing an effective and efficient security policy in a chemical industrial cluster. The first issue involves obtaining an acceptable level of collaboration between the different enterprises forming the cluster. The second topic is to ensure that an

  10. Collaborative Manufacturing for Small-Medium Enterprises

    Science.gov (United States)

    Irianto, D.

    2016-02-01

    Manufacturing systems involve decisions concerning production processes, capacity, planning, and control. In a MTO manufacturing systems, strategic decisions concerning fulfilment of customer requirement, manufacturing cost, and due date of delivery are the most important. In order to accelerate the decision making process, research on decision making structure when receiving order and sequencing activities under limited capacity is required. An effective decision making process is typically required by small-medium components and tools maker as supporting industries to large industries. On one side, metal small-medium enterprises are expected to produce parts, components or tools (i.e. jigs, fixture, mold, and dies) with high precision, low cost, and exact delivery time. On the other side, a metal small- medium enterprise may have weak bargaining position due to aspects such as low production capacity, limited budget for material procurement, and limited high precision machine and equipment. Instead of receiving order exclusively, a small-medium enterprise can collaborate with other small-medium enterprise in order to fulfill requirements high quality, low manufacturing cost, and just in time delivery. Small-medium enterprises can share their best capabilities to form effective supporting industries. Independent body such as community service at university can take a role as a collaboration manager. The Laboratory of Production Systems at Bandung Institute of Technology has implemented shared manufacturing systems for small-medium enterprise collaboration.

  11. Improving collaboration between large and small-medium enterprises in automobile production

    Science.gov (United States)

    Sung, Soyoung; Kim, Yanghoon; Chang, Hangbae

    2018-01-01

    Inter-organisational collaboration is important for achieving qualitative and quantitative performance improvement in the global competitive environment. In particular, the extent of collaboration between the mother company and its suppliers is important for the profitability and sustainability of a company in the automobile industry, which is carried out using a customisation and order production system. As a result of the empirical analysis in this study, the collaborative information sharing cycle is shortened and the collaborative information sharing scope is widened. Therefore, the level of collaboration is improved by constructing an IT collaboration system.

  12. [Investigation of occupational noise exposure and hearing loss in large automobile manufacturing enterprise during 2006-2010 in Guangzhou, China].

    Science.gov (United States)

    Zhao, Yuan; Zhou, Hao; Li, Yanhua; Xiao, Lvwu; Wu, Lin; Du, Weijia; Liu, Yimin

    2014-02-01

    To analyze the relationship between occupational noise exposure and hearing loss among workers in large automobile manufacturing enterprise during 2006-2010 in Guangzhou, China. A retrospective cohort study was conducted. The subjects were divided into noise exposure group and control group. Their hearing examination results and noise exposure levels in different workplaces were collected during 2006-2010, and the relationship between noise exposure in workplaces and hearing loss was analyzed. The incidence of hearing loss for the noise exposure group was 9.34%, versus 2.75% for the control group; the noise exposure group had a significantly higher risk of hearing loss than the control group (R = 3.378, 95%CI = 1.467∼ 9.083). The noise intensity and over-limit rate were significantly higher in the stamping, welding, and general assembly workshops than in other workshops. The risk of hearing loss significantly increased with years of noise exposure in 80, 85, and 90 dB (A) groups (χ(2) = 6.377, P = 0.041; χ(2) = 8.570, P = 0.014; χ(2) = 7.037, P = 0.030). The risk of hearing loss also increased with noise intensity in all working age groups (χ(2) = 5.068, P = 0.024; χ(2) = 71.497, P hearing loss in workers. The incidence of hearing loss increases with the noise intensity in workplaces and years of noise exposure. The noise exposure level and incidence of hearing loss are higher in the stamping workshop than in other workshops. Controlling the noise intensity in automobile manufacturing enterprise may reduce the risk of hearing loss in workers.

  13. Environmental quality indexing of large industrial development alternatives using AHP

    International Nuclear Information System (INIS)

    Solnes, Julius

    2003-01-01

    Two industrial development alternatives have been proposed for the East Coast of Iceland in order to strengthen its socio-economic basis. The favoured option is to build a large aluminium smelter, which requires massive hydropower development in the nearby highlands. Another viable option is the construction of a 6-million-ton oil refinery, following the planned exploitation of the Timan Pechora oil reserves in the Russian Arctic. A third 'fictitious' alternative could be general development of existing regional industry and new knowledge-based industries, development of ecotourism, establishment of national parks, accompanied by infrastructure improvement (roads, tunnels, communications, schools, etc.). The three alternatives will have different environmental consequences. The controversial hydropower plant for the smelter requires a large water reservoir as well as considerable land disturbance in this unique mountain territory, considered to be the largest uninhabited wilderness in Western Europe. The aluminium smelter and the oil refinery will give rise to substantial increase of the greenhouse gas (GHG) emissions of the country (about 20%). Then there is potential environmental risk associated with the refinery regarding oil spills at sea, which could have disastrous impact on the fisheries industry. However, the oil refinery does not require any hydropower development, which is a positive factor. Finally, the third alternative could be defined as a ''green'' solution whereby the detrimental environmental consequences of the two industrial solutions are mostly avoided. In order to compare the three alternatives in an orderly manner, the analytic hierarchy process methodology of Saaty was applied to calculate the environmental quality index of each alternative, which is defined as a weighted sum of selected environmental and socio-economic factors. These factors are evaluated on a comparison basis, applying the AHP methodology, and the weights in the quality

  14. An enterprise energy-information system

    Energy Technology Data Exchange (ETDEWEB)

    Swords, B.; Coyle, E. [School of Control Systems and Electrical Engineering, Dublin Institute of Technology, Kevin St., Dublin 8 (Ireland); Norton, B. [President, Dublin Institute of Technology, Aungier St., Dublin 2 (Ireland)

    2008-01-15

    This paper outlines the background, development, and assessment of a prototype enterprise energy information system (EEIS) that supports strategic energy-management by providing comprehensive energy monitoring and targeting, integrating with energy modelling software and enterprise business databases, and supporting measurement and verification (M and V). The EEIS prototype system was developed and assessed in an industrial site and a third-level education institution with colleges throughout Dublin. The industrial site provided the opportunity for the EEIS to meet the requirements of a large energy intensive site, and to integrate with energy modelling software. The higher education establishment accommodated the development of a networked energy-information system. (author)

  15. Contribution to the integration methodology of environment in the small and medium enterprises or industries: evaluation of environmental performances

    International Nuclear Information System (INIS)

    Personne, M.

    1998-01-01

    The integration of environmental criteria into industrial plants working is nowadays an obligation for companies. Implementation of an Environmental Management System (EMS) is a mean to integrate these criteria, and the system registration (by ISO 14001 or EMAS standards) enables companies to demonstrate the validity of their environmental behaviour to interested parties. Our experience in Small and Medium Enterprises (SMEs) has allowed us to note the inadequacy between their environmental integration level and EMS requirements. In addition to that, we have observed that environmental assessment methods, which could enable SMEs to make up for lost time, were not adapted to their specificities. However, two recent approaches are innovative: the first one is based on a progressive processes, the second one on an environmental information system, based on indicators construction. On the basis of existing methods study, improved with our SMEs experience, our approach consists of developing an environmental integration method, joining the progressive aspect (construction of a 'multi-phases' method) and the information treatment (exploitation of environmental data by indicators construction). We propose a four phases method, - environmental performance evaluation, internal and external results exploitation, process perpetuation -, setting up an information treatment system, by means of compliance, progress and monitoring indicators. Leading to implementation of an environmental performance continuous improvement cycle, this process enables companies to step forward EMS implementation. (author)

  16. An introduction to enterprise modeling and simulation

    Energy Technology Data Exchange (ETDEWEB)

    Ostic, J.K.; Cannon, C.E. [Los Alamos National Lab., NM (United States). Technology Modeling and Analysis Group

    1996-09-01

    As part of an ongoing effort to continuously improve productivity, quality, and efficiency of both industry and Department of Energy enterprises, Los Alamos National Laboratory is investigating various manufacturing and business enterprise simulation methods. A number of enterprise simulation software models are being developed to enable engineering analysis of enterprise activities. In this document the authors define the scope of enterprise modeling and simulation efforts, and review recent work in enterprise simulation at Los Alamos National Laboratory as well as at other industrial, academic, and research institutions. References of enterprise modeling and simulation methods and a glossary of enterprise-related terms are provided.

  17. GUARANTEEING THE TROUBLE-FREE OPERATION OF CAPACITOR BANKS IN POWER-SUPPLY SYSTEMS OF INDUSTRIAL ENTERPRISES

    Directory of Open Access Journals (Sweden)

    D.A. Gapon

    2016-03-01

    Full Text Available Purpose. The problem of resonance phenomena in power systems of industrial enterprises using capacitor banks for reactive power compensation was detected. Circuit of the capacitor banks tier to downshift main substation tires is present. But there is no common algorithm to calculate and avoid such trouble. The main goal of this article is to introduce some basics for power supply systems with possible resonant circuits engineering. Methodology. At the first step the data on the change of the current in the chemical company network when changing capacitor banks value are received. For these purposes the oscilloscope function of digital protection relay was used. Current data samples were analyzed by spectrum detection software. Most significant levels of the 3rd and 5th harmonics were achieved. Comparison of harmonic distortion levels with and without capacitor bank is given. Results. Achieved data allow making conclusion about overloading reasons of capacitor banks while higher harmonics currents presence. A voltage and current harmonious composition measuring in the absence of power quality analyzers using digital protection relay terminals or emergencies registers are proposed. The necessity of power quality monitoring near capacitor banks connections to avoid resonance phenomena (current and voltage resonance in industrial power supply systems is proven. The control algorithm of capacitor banks to provide electromagnetic compatibility, while various modes of nonlinear load operation is given. Originality. Using of digital protection relay oscilloscoping for current resonant detection can allow to significally reduce time and cost of solution. Replacement parallel circuit comprising a branch and one active-inductive load to another branch network in the presence of higher harmonics source are proposed. Practical value. A sequence for measuring the levels of harmonic components at the connections of capacitor banks in the absence of specialized

  18. Enterprise risk management and firm value within China’s insurance industry

    Directory of Open Access Journals (Sweden)

    Qiuying Li

    2014-02-01

    Research purpose: The purpose of the study is to empirically examine the relationship between ERM and firm value. The study is undertaken within the context of the Chinese insurance industry. Motivation for the study: Recent attempts to link ERM with firm value have been undertaken primarily in the USA and Europe and have produced ambiguous and inconclusive findings. Research design, approach and method: Data was obtained from the China Insurance Regulatory Commission, a government body responsible for regulating insurance products and services in China. The data sample consisted of 135 insurance companies operating in China (in 2010. Regression modelling is employed to analyse the data. Main findings: The results show the relationship between ERM and firm value at first appears statistically significant within a Pearson correlation matrix but then falls below statistical significance on closer scrutiny through regression analysis. Accordingly, it is recommended that insurers in China should not look to aggressive investment in ERM as a strategy for producing quick gains in firm value. Practical/managerial implications: Risk managers should plan ERM development from a risk management maturity perspective, which equates the highest level of ERM development with ERM’s capacity to improve firm resilience to the unknown and serve as a mechanism for strategic decision-making. Contribution/value-add: The study employed return on equity as a proxy for firm value, utilising ordinary least squares regression modelling to test propositions of the relationships between variables.

  19. Multinational Enterprises from Small Economies: The Internationalization Pattern of Large Companies from Denmark, Finland and Norway

    OpenAIRE

    Benito, Gabriel R.G.; Larimo, Jorma; Narula, Rajneesh; Pedersen, Torben

    2001-01-01

    Analyzing the internationalization of large companies from small countries requires understanding the process of internationalization by examining the interface between micro (firm strategies) and macro (the forces of centripetal and centrifugal) level factors. We examine the growth and international expansion of the ten largest companies in Denmark, Finland, and Norway over the period 1990 to 1999. Most companies in the sample became more international during the last decade across basically...

  20. ANALYSIS OF LEADERSHIP STYLES IN ŠIBENIK-KNIN COUNTY BASED ON MEDIUM AND LARGE ENTERPRISES

    Directory of Open Access Journals (Sweden)

    Željko Požega

    2012-12-01

    Full Text Available During the last two decades leadership has become the main focus of intense interest and research by scientists and theorists. A large number of leadership models has been developed in order to define and enable the certain level of business flexibility that is crucial to survive in a new business environment which is characterized by frequent market change, growing global competition and technology development together with demographic changes of employees. The purpose of the paper is to determine the dominant leadership style as well as the advantages and disadvantages in medium and large organizations in Šibenik-Knin County. For the purpose of this paper, empirical research was conducted with the goal of defining the leadership styles of top and middle management based on medium and large organizations. The research was based on the leadership model developed and established by Likert Renis which is the most used and recognized model for diagnostic determination of the dominant leadership style. The Likert model is based on six components: leadership, motivation, communication, decision making, goals and control which determine the four leadership styles: extreme authoritative, paternalistic, consultative and participative leadership style.

  1. Giat Industries selected for construction of the "Very Large Telescope"

    Science.gov (United States)

    1995-06-01

    Versailles-Satory (France) May 31, 1995 - Giat Industries has just obtained a contract from the European Southern Observatory (ESO) for the construction of the primary and tertiary mirror supports and the positioning apparatus of the world's largest optical telescope. This contract, worth almost 140 million francs, represents over 100,000 hours of work. It was won by Gitech, a division of Giat Industries, in collaboration with the Sfim group, following an international competition between the largest European groups in the space field. Gitech is charged with the development of civil and military industrial equipment for the Giat Industries group, in particular in high technology fields. The VLT (Very Large Telescope) will be installed in Chile before the year 2000; the delivery schedule provides for reception of the first assembly in May 1997. It will consist of four telescopes of 8.2m diameter, providing, in its most powerful configuration, a close-up view of an object measuring one meter on the surface of the moon. The cell, built by Gitech, is one of the key parts of the telescope. It mainly consists of a very rigid metal structure and an electro-hydraulic system of more that 200 hydraulic jacks and 150 electrically-controlled jacks linking the metallic structure to the mirror. This structure, produced to an original design of laser-welded steel chambers, weighs less than 10 tonnes and will support over 37 tonnes of mirror and equipment, while guaranteeing precise positioning to within a micron. The electro-hydraulic jack system, manufactured in collaboration with the Sfim group, will support and position the mirror, and correct its geometry by applying a precise distribution of forces to its rear. The assembly is designed to meet the requirements of para-seismic safety. Gitech is also producing the computerised control system to ensure the operation and the reliability of the assembly.

  2. [An investigation of the application of hygienic standards for the design of industrial enterprises (GBZ 1-2010)].

    Science.gov (United States)

    Lu, Y; Zhang, M

    2016-08-20

    Objective: To study the applicability, the high frequency used content, the feasibility, and issues needed to be solved of the standard of GBZ 1-2010, aiming to provide technical evidence for the revision of GBZ1. Methods: In the study, the data were collected by referring to the literature database and the questionnaire from June 2013 to June 2015. There were 2 surveys carried out in the study, with methods including questionnaire survey and specific interview. The investigation methods include the paper version of the questionnaire by mail, the electronic version of the questionnaire by e-mail, and the online survey. And 111 questionnaires were collected. Results: In total, the applicability survey (the first survey) received 156 suggestions covering 76 items from 23 facilities, and 13 key technical issues were summarized to be solved as priorities. In the application survey (the second survey) , the leading three jobs using GBZ 1-2010 were the occupational hazards evaluation for constructive project (82.0%) , lecturing/training (65.8%) , occupational hazards monitoring (64.9%) , respectively. The high frequency used contents of GBZ 1-2010 were the sixth part "the basic hygienic requirements for workplace" (90.1%) , the fifth part "site selection, overall layout and workshop design" (87.4%) , the seventh part "the basic hygienic requirements for welfare room" (85.6%) , respectively. In the results of feasibility, scores of the fourth part "the general rules" , the fifth part "site selection, overall layout and workshop design" , the sixth part "the basic hygienic requirements for workplace" , the seventh part "the basic hygienic requirements for welfare room" , the eighth "emergency rescue" , annex A "the correct use instructions" , annex B "buffer zone standards for industrial enterprises" were 2.6, 3.1, 3.5, 3.8, 3.2, 3.3, 2.6, respectively. Among 111 questionnaires, the parts needed to be modified as priories were the fifth part "site selection, overall layout

  3. Self-employed persons in Sweden - mortality differentials by industrial sector and enterprise legal form: a five-year follow-up study.

    Science.gov (United States)

    Toivanen, Susanna; Mellner, Christin; Vinberg, Stig

    2015-01-01

    This study investigated mortality differentials between self-employed persons in Sweden, considering industrial sector, enterprise characteristics and socio-demographic factors. Data on 321,274 self-employed persons were obtained from population registers in Sweden. Cox proportional hazards models were used to compare all-cause and cause-specific mortality rate ratios by industrial sector and enterprise legal form, adjusted for confounders. All-cause mortality was 10-32% higher in self-employed persons in Manufacturing and Mining, Trade and Communication, and Not Specified and Other sectors than in Agriculture, Forestry, and Fishing. Mortality from cardiovascular disease was 23% higher in Trade and Communication, and from neoplasms 17-51% higher in Manufacturing and Mining, Not Specified, and Other. Mortality from suicide was 45-60% lower in Personal and Cultural Services, and in Not Specified. Mortality was 8-16% higher in sole proprietorship than limited partnership. Further research of working conditions is warranted, considering industry and enterprise legal form. © 2014 Wiley Periodicals, Inc.

  4. STRATEGIC ANALYSIS OF THE EFFECTIVE DEVELOPMENT OF INDUSTRIAL ENTERPRISES ON THE BASIS OF THE USE OF “CORPORATE INNOVATION MANAGEMENT CHART”

    Directory of Open Access Journals (Sweden)

    Yuliia Klius

    2017-12-01

    Full Text Available Intensification of innovation activity of enterprises requires a qualitatively new organization of interconnections and interaction between all participants of the innovation process. The spreading of forms of corporate ownership and management in Ukraine has led to the development of corporate governance, whose strategic focus is becoming a top priority in the management of industrial enterprises. The introduction of an effective corporate innovation management system enhances competitiveness and economic efficiency by ensuring due attention to the interests of investors, management, and other participants in corporate relations; financial transparency, the introduction of effective management and control rules. The purpose of the article is to substantiate the use of “corporate innovation management chart” at industrial enterprises in conducting a strategic analysis of their effective development. Methodology. Methodological basis of the work is a set of methods and principles of scientific knowledge, general and special methods and techniques used during the study. The theoretical basis of the research is fundamental positions of the general theory of systems and innovation management, the theory of corporate management, scientific works of domestic and foreign scholars in the field of innovation management and corporate governance. The legal framework of the study is the current legislative and regulatory documents regulating the innovation activity of enterprises and corporate governance. For the achievement of the set purpose during writing of the article, the following methods are used: method of system analysis (for the definition of conditions of functioning of the corporate system of management of innovations; modelling (in the development of a mechanism for managing the effective development of an industrial enterprise with the use of “corporate innovation management chart”; graphic (for a visual representation of stages of

  5. Distributed constraint satisfaction for coordinating and integrating a large-scale, heterogenous enterprise

    CERN Document Server

    Eisenberg, C

    2003-01-01

    Market forces are continuously driving public and private organisations towards higher productivity, shorter process and production times, and fewer labour hours. To cope with these changes, organisations are adopting new organisational models of coordination and cooperation that increase their flexibility, consistency, efficiency, productivity and profit margins. In this thesis an organisational model of coordination and cooperation is examined using a real life example; the technical integration of a distributed large-scale project of an international physics collaboration. The distributed resource constraint project scheduling problem is modelled and solved with the methods of distributed constraint satisfaction. A distributed local search method, the distributed breakout algorithm (DisBO), is used as the basis for the coordination scheme. The efficiency of the local search method is improved by extending it with an incremental problem solving scheme with variable ordering. The scheme is implemented as cen...

  6. The system of computer simulation and organizational management of large enterprises activity

    Directory of Open Access Journals (Sweden)

    E. D. Chertov

    2016-01-01

    Full Text Available Study on the construction of an integrated technical support is carried out by the example of organizational information systems (or administrative and economic management activities of large organizations. As part of the management information system, comprehensive technical support related to other parts of the system, first of all, to the information database managementsystem, which covers all types of information required for planning and management, and an algorithm for processing this information. This means that not only the control system determines the required set of technical means, but it features a significant effect on the composition and organization of the management information system database. A feature of the integrated logistics is the variety of hardware functions, a large number of device types, different ways of interaction of the operator and equipment, the possibility of a different line-up and aggregation devices. The complex of technical means of information management systems have all the features of a complex system: versatility, availability feedbacks multicriteriality, hierarchical structure, the presence of allocated parts connected to each other by complex interactions, the uncertainty of the behavior of these parts, which is the result of the ultimate reliability of technical means and the influence of environmental disturbances . For this reason, the tasks associated with the creation of an integrated logistics management information system should be solved with the system approach. To maximize the efficiency of the information management system required the construction of technological complex with minimal installation and operation, which leads to the need to choose the optimal variant of technical means of the number of possible. The decision of the main objectives of integrated logistics can be reduced to the construction of the joint number of languages - character sets or alphabets describing the input

  7. The Energy Efficient Enterprise

    Energy Technology Data Exchange (ETDEWEB)

    Ahmad, Bashir

    2010-09-15

    Since rising energy costs have become a crucial factor for the economy of production processes, the optimization of energy efficiency is of essential importance for industrial enterprises. Enterprises establish energy saving programs, specific to their needs. The most important elements of these energy efficiency programs are energy savings, energy controlling, energy optimization, and energy management. This article highlights the industrial enterprise approach to establish sustainable energy management programs based on the above elements. Globally, if organizations follow this approach, they can significantly reduce the overall energy consumption and cost.

  8. Developing Industry-Sponsored Entrepreneurship Education Programmes. The Experiences of the Coca-Cola National Enterprise Award.

    Science.gov (United States)

    Henry, Colette; Titterington, Albert; Wiseman, Kate

    1998-01-01

    A partnership among Dundalk Institute of Technology (Ireland), Coca Cola, and government encourages young entrepreneurs through formal education in business management, workshops, mentoring, and financial rewards provided by the corporation's National Enterprise Award. (SK)

  9. What affects the innovation performance of small and medium-sized enterprises (SMEs) in the biotechnology industry? An empirical study on Korean biotech SMEs.

    Science.gov (United States)

    Kang, Kyung-Nam; Lee, Yoon-Sik

    2008-10-01

    Research-intensive small and medium-sized enterprises (SMEs) play a crucial role in the advancement of the biotechnology industry. This paper explored the impacts of internal and contextual variables on innovative activity in Korea and compared the results of this analysis with previous studies of other countries. Our analysis of 149 Korean biotech SMEs showed that the ratio of R&D expenditure to sales, the ratio of R&D employees to total employees, CEO characteristics, governmental support and international networking are positively correlated with a firm's innovation performance. The results may help decision makers to better foster SMEs in the Korean biotechnology industry.

  10. Optimization of large-scale industrial systems : an emerging method

    Energy Technology Data Exchange (ETDEWEB)

    Hammache, A.; Aube, F.; Benali, M.; Cantave, R. [Natural Resources Canada, Varennes, PQ (Canada). CANMET Energy Technology Centre

    2006-07-01

    This paper reviewed optimization methods of large-scale industrial production systems and presented a novel systematic multi-objective and multi-scale optimization methodology. The methodology was based on a combined local optimality search with global optimality determination, and advanced system decomposition and constraint handling. The proposed method focused on the simultaneous optimization of the energy, economy and ecology aspects of industrial systems (E{sup 3}-ISO). The aim of the methodology was to provide guidelines for decision-making strategies. The approach was based on evolutionary algorithms (EA) with specifications including hybridization of global optimality determination with a local optimality search; a self-adaptive algorithm to account for the dynamic changes of operating parameters and design variables occurring during the optimization process; interactive optimization; advanced constraint handling and decomposition strategy; and object-oriented programming and parallelization techniques. Flowcharts of the working principles of the basic EA were presented. It was concluded that the EA uses a novel decomposition and constraint handling technique to enhance the Pareto solution search procedure for multi-objective problems. 6 refs., 9 figs.

  11. Application of large radiation sources in chemical processing industry

    International Nuclear Information System (INIS)

    Krishnamurthy, K.

    1977-01-01

    Large radiation sources and their application in chemical processing industry are described. A reference has also been made to the present developments in this field in India. Radioactive sources, notably 60 Co, are employed in production of wood-plastic and concrete-polymer composites, vulcanised rubbers, polymers, sulfochlorinated paraffin hydrocarbons and in a number of other applications which require deep penetration and high reliability of source. Machine sources of electrons are used in production of heat shrinkable plastics, insulation materials for cables, curing of paints etc. Radiation sources have also been used for sewage hygienisation. As for the scene in India, 60 Co sources, gamma chambers and batch irradiators are manufactured. A list of the on-going R and D projects and organisations engaged in research in this field is given. (M.G.B.)

  12. Industrial metrology as applied to large physics experiments

    International Nuclear Information System (INIS)

    Veal, D.

    1993-05-01

    A physics experiment is a large complex 3-D object (typ. 1200 m 3 , 35000 tonnes), with sub-millimetric alignment requirements. Two generic survey alignment tasks can be identified; first, an iterative positioning of the apparatus subsystems in space and, second, a quantification of as-built parameters. The most convenient measurement technique is industrial triangulation but the complexity of the measured object and measurement environment constraints frequently requires a more sophisticated approach. To enlarge the ''survey alignment toolbox'' measurement techniques commonly associated with other disciplines such as geodesy, applied geodesy for accelerator alignment, and mechanical engineering are also used. Disparate observables require a heavy reliance on least squares programs for campaign pre-analysis and calculation. This paper will offer an introduction to the alignment of physics experiments and will identify trends for the next generation of SSC experiments

  13. Industrial metrology as applied to large physics experiments

    Energy Technology Data Exchange (ETDEWEB)

    Veal, D.

    1993-05-01

    A physics experiment is a large complex 3-D object (typ. 1200 m{sup 3}, 35000 tonnes), with sub-millimetric alignment requirements. Two generic survey alignment tasks can be identified; first, an iterative positioning of the apparatus subsystems in space and, second, a quantification of as-built parameters. The most convenient measurement technique is industrial triangulation but the complexity of the measured object and measurement environment constraints frequently requires a more sophisticated approach. To enlarge the ``survey alignment toolbox`` measurement techniques commonly associated with other disciplines such as geodesy, applied geodesy for accelerator alignment, and mechanical engineering are also used. Disparate observables require a heavy reliance on least squares programs for campaign pre-analysis and calculation. This paper will offer an introduction to the alignment of physics experiments and will identify trends for the next generation of SSC experiments.

  14. Internationalisation Barriers of Small and Medium-sized Manufacturing Enterprises in Ethiopia: Leather and Leather Products Industry in Focus

    Directory of Open Access Journals (Sweden)

    Yehualashet Demeke Lakew

    2015-11-01

    Full Text Available The purpose of this study was to examine internationalisation barriers of manufacturing SMEs operating in Leather and Leather Products Industry located in the capital city of Ethiopia. The small and medium sized enterprises (SMEs sector in Ethiopia is a significant group within the economy in terms of firm numbers and total employment. However, the SMEs sector’s share of exports is disproportionately small, which raised considerable research concerns. Firm export propensity was the dependent variable and internal and external export barrier factors were used as explanatory variables. The study was conducted through mixed research design of quantitative survey and case study. From the population of manufacturing SMEs operating in the Leather and Leather products Industry, a sample was selected through the use of stratified random sampling to ensure the effective representation of the population of exporting and non-exporting SMEs in the capital of Ethiopia. In order to complement survey results nine (4 exporting and 5 non-exporting SMEs were selected through critical case purposive sampling and an in-depth interviews were conducted. Statistical package for the social sciences (SPSS 20 was used to analyse the quantitative data whereas, qualitative data were analysed manually. Exploratory factor analysis with Varimax rotation and Binary logistic regression analysis are the analytical methods used. The statistical result showed that, logistics problem, insufficient finance, functional barriers, lack of export knowledge and information, procedural barriers and international trade barriers are the most significant obstacles of export trade in Ethiopia. The overall results revealed that explanatory variables used in the analysis significantly predict the dependent variable at 95% confidence level. Taken together, these results prompted the presentation of numerous implications for theory, practice, and future research. Finally, the paper recommended

  15. Industrial enterprises bankruptcy forecasting

    Directory of Open Access Journals (Sweden)

    Dvořáček, J.

    2008-01-01

    Full Text Available This paper addresses problems of bankruptcy prediction. It has been oriented by past and recent situations in the Czech Republic. A brief overview of authors from abroad, who have been involved in investigations of this subject, is given. The circulation of capital is described inclusive intrusive factors that disturb capital’s circulation hampering economic functioning of corporate businesses, which may lead to their final demise. A set of indicators has been specified that reflect the circulation of capital, and which provide for employing a statistical process – discriminate analysis – that links the probability of a corporate business default to these indicators.

  16. The impact of risk on the financial performance of small medium enterprises in the construction industry in Eastern Cape, South Africa

    Directory of Open Access Journals (Sweden)

    William Chiliya

    2015-09-01

    Full Text Available Risk management has become the driving force for business success due to the everchanging business environment. The purpose of this study is to investigate the impact of the level of awareness and use of risk management techniques on the financial performance. The data was collected from 82 of Small Medium Enterprises (SMEs owners/managers in the construction industry in Eastern Cape, South Africa. The results show that the level of awareness and use of risk management techniques have a significant impact on the financial performance of SMEs in the construction industry. The study recommends that the government, tertiary institutions, construction industry development board, and SME owners or managers in the construction industry should work together in improving the level of awareness and use of risk management techniques.

  17. Grading Prediction of Enterprise Financial Crisis Based on Nonlinear Programming Evaluation: A Case Study of Chinese Transportation Industry

    Directory of Open Access Journals (Sweden)

    Zhi-yuan Li

    2014-01-01

    Full Text Available As the core of the effective financial crisis prevention, enterprise finance crisis prediction has been the focal attention of both theorists and businessmen. Financial crisis predictions need to apply a variety of financial and operating indicators for its analysis. Therefore, a new evaluation model based on nonlinear programming is established, the nature of the model is proved, the detailed solution steps of the model are given, and the significance and algorithm of the model are thoroughly discussed in this study. The proposed model can deal with the case of missing data, and has the good isotonic property and profound theoretical background. In the empirical analysis to predict the financial crisis and through the comparison of the analysis of historical data and the real enterprises with financial crisis, we find that the results are in accordance with the real enterprise financial conditions and the proposed model has a good predictive ability.

  18. Measuring the efficiency of large pharmaceutical companies: an industry analysis.

    Science.gov (United States)

    Gascón, Fernando; Lozano, Jesús; Ponte, Borja; de la Fuente, David

    2017-06-01

    This paper evaluates the relative efficiency of a sample of 37 large pharmaceutical laboratories in the period 2008-2013 using a data envelopment analysis (DEA) approach. We describe in detail the procedure followed to select and construct relevant inputs and outputs that characterize the production and innovation activity of these pharmaceutical firms. Models are estimated with financial information from Datastream, including R&D investment, and the number of new drugs authorized by the European Medicines Agency (EMA) and the US Food and Drug Administration (FDA) considering the time effect. The relative performances of these firms-taking into consideration the strategic importance of R&D-suggest that the pharmaceutical industry is a highly competitive sector given that there are many laboratories at the efficient frontier and many inefficient laboratories close to this border. Additionally, we use data from S&P Capital IQ to analyze 2071 financial transactions announced by our sample of laboratories as an alternative way to gain access to new drugs, and we link these transactions with R&D investment and DEA efficiency. We find that efficient laboratories make on average more financial transactions, and the relative size of each transaction is larger. However, pharmaceutical companies that simultaneously are more efficient and invest more internally in R&D announce smaller transactions relative to total assets.

  19. Products, practices and processes: exploring the innovation potential for low-carbon housing refurbishment among small and medium-sized enterprises (SMEs) in the UK construction industry

    International Nuclear Information System (INIS)

    Killip, Gavin

    2013-01-01

    Scenario-based studies agree that the technical potential for CO 2 emissions reduction from the housing stock is large. This paper explores how a market might be developed for the refurbishment activities assumed in these scenarios, taking the existing market for repair, maintenance and improvement (RMI) as its starting point. Interviews with 16 small and medium-sized enterprises (SMEs) in the construction industry reveal the interdependence of products, practices and processes in housing renovation activities. Conservative practice as well as innovation can be understood as the outcome of multi-lateral influences on firms from other firms, clients, the material buildings and products in their working lives, and from regulations and regulators. Contractors' openness to innovation is contingent on an informal approach to risk assessment, taking account of cost, time efficiency, client demands, and installer confidence in the reliability of the resulting work. The implications of the research are discussed in relation to the need for new practices and processes on refurbishment projects, raising questions for future research on key questions of quality assurance, performance over time, the application of standards, and vocational training. -- Highlights: •Repair, maintenance and improvement works are triggers for low-carbon refurbishment. •Millions of property owners and small firms make for fragmented decision-making. •Actor-Network Theory is used to frame decision-making processes for refurbishment. •Small builders can be innovative if clients allow time and money for experimentation. •Energy policy for existing homes needs to engage with the construction sector

  20. The characteristics of psychological demands of the large state-owned enterprises workers and its relationship between it and the worker’s turnover intention and job satisfaction

    Directory of Open Access Journals (Sweden)

    Ning-ning KONG

    2013-12-01

    Full Text Available Based on Maslow’s hierarchy of needs theory, the article to investigate the worker’s psychological needs in a large state-owned enterprises. It analyzed workers of different ages , different education level, and their differences in psychological needs structure characteristics and strength.The subjective turnover intention and job satisfaction are correlative of psychological needs. The article proposed the suitable management strategies of the worker’s psychological needs.

  1. The characteristics of psychological demands of the large state-owned enterprises workers and its relationship between it and the worker’s turnover intention and job satisfaction

    OpenAIRE

    Ning-ning KONG; Ying LI

    2013-01-01

    Based on Maslow’s hierarchy of needs theory, the article to investigate the worker’s psychological needs in a large state-owned enterprises. It analyzed workers of different ages , different education level, and their differences in psychological needs structure characteristics and strength.The subjective turnover intention and job satisfaction are correlative of psychological needs. The article proposed the suitable management strategies of the worker’s psychological needs.

  2. A User-Centered Mobile Cloud Computing Platform for Improving Knowledge Management in Small-to-Medium Enterprises in the Chilean Construction Industry

    Directory of Open Access Journals (Sweden)

    Daniela Núñez

    2018-03-01

    Full Text Available Knowledge management (KM is a key element for the development of small-to-medium enterprises (SMEs in the construction industry. This is particularly relevant in Chile, where this industry is composed almost entirely of SMEs. Although various KM system proposals can be found in the literature, they are not suitable for SMEs, due to usability problems, budget constraints, and time and connectivity issues. Mobile Cloud Computing (MCC systems offer several advantages to construction SMEs, but they have not yet been exploited to address KM needs. Therefore, this research is aimed at the development of a MCC-based KM platform to manage lessons learned in different construction projects of SMEs, through an iterative and user-centered methodology. Usability and quality evaluations of the proposed platform show that MCC is a feasible and attractive option to address the KM issues in SMEs of the Chilean construction industry, since it is possible to consider both technical and usability requirements.

  3. Developing Innovative Competences in an Emerging Business System: New Private Enterprises in Hangzhou’s Software Industry

    NARCIS (Netherlands)

    M.J. Greeven (Mark); Z. Xiaodong (Zhao)

    2009-01-01

    textabstractWhat kind of innovative competences are credibly developed by private entrepreneurs in China’s transition economy? On the basis of original empirical fieldwork in 45 software enterprises in Hangzhou, Zhejiang Province, we propose a working theory of innovative competence development in

  4. MULTI-MARKET INDUSTRIAL ORGANIZATIONAL ECONOMIC MODELS FOR THE INTERNATIONALIZATION PROCESS BY SMALL AND MEDIUM ENTERPRISE CONSTRUCTION DESIGN SERVICE FIRMS

    Directory of Open Access Journals (Sweden)

    Kerry London

    2010-11-01

    Full Text Available Small and medium enterprises (SMEs are critical to strategic initiatives in an economy; however, their contribution to foreign trade is not as significant. SMEs are one of the principal driving forces in economic development. One of the greatest challenges is the internationalization process for longevity rather than seeing the process as initial market entry. The internationalization process research has typically involved four key constructs: market selection, decision to enter, entry modes and factors affecting entry modes. Past research has focused on large manufacturing firms. The export of architectural, engineering and construction (AEC firms has undergone growth, yet there is still significant opportunity for further growth. The majority of AEC firms are SMEs. Notwithstanding assistance provided through international trade missions, organized export firm support networks and information packages by a burgeoning number of government agencies, there are still perceived barriers to market entry and long-term economic sustainability for SMEs. There are a number of problems faced by SMEs acting in foreign trade. This investigation explores the successful initial internationalization process constructs and identifies unique project-oriented sector characteristics. The study identified similarities and differences between two firms that have been exporting to various localities, including Eastern Europe, Africa, Middle East, UK, Asia and South America, for more than two decades. The similarities and differences were identified within eight major constructs: purpose, firm type, market image and design philosophy, entry mode strategy, institutional arrangement, factors affecting mode of entry, market selection and firm strategy in relation to project selection. The primary reasons for internationalization were associated with the firms' motivations related to growth and financial viability. This article discusses the various internationalization

  5. Engaging with economic evaluation methods: insights from small and medium enterprises in the UK medical devices industry after training workshops

    Directory of Open Access Journals (Sweden)

    Craven Michael P

    2012-09-01

    Full Text Available Abstract Background With increased governmental interest in value assessment of technologies and where medical device manufacturers are finding it increasingly necessary to become more familiar with economic evaluation methods, the study sought to explore the levels of health economics knowledge within small and medium-sized enterprises (SMEs and to scope strategies they employ to demonstrate the value of their products to purchasers. Methods A short questionnaire was completed by participants attending one of five workshops on product development in the medical device sector that took place in England between 2007 and 2011. From all responses obtained, a large proportion of participants were based in SMEs (N = 43, and these responses were used for the analysis. Statistical analysis using non-parametric tests was performed on questions with approximately interval scales. Qualitative data from participant responses were analysed to reveal emerging themes. Results The questionnaire results revealed that 60% of SME participants (mostly company directors or managers, including product or project managers rated themselves as having low or no knowledge of health economics prior to the workshops but the rest professed at least medium knowledge. Clinical trials and cost analyses or cost-effectiveness studies were the most highly cited means by which SMEs aim to demonstrate value of products to purchasers. Purchasers were perceived to place most importance on factors of safety, expert opinion, cost-effectiveness and price. However many companies did not utilise formal decision-making tools to prioritise these factors. There was no significant dependence of the use of decision-making tools in general with respect to professed knowledge of health economics methods. SMEs did not state a preference for any particular aspect of potential value when deciding whether to develop a product. A majority of SMEs stated they would use a health economics tool

  6. Engaging with economic evaluation methods: insights from small and medium enterprises in the UK medical devices industry after training workshops.

    Science.gov (United States)

    Craven, Michael P; Allsop, Matthew J; Morgan, Stephen P; Martin, Jennifer L

    2012-09-03

    With increased governmental interest in value assessment of technologies and where medical device manufacturers are finding it increasingly necessary to become more familiar with economic evaluation methods, the study sought to explore the levels of health economics knowledge within small and medium-sized enterprises (SMEs) and to scope strategies they employ to demonstrate the value of their products to purchasers. A short questionnaire was completed by participants attending one of five workshops on product development in the medical device sector that took place in England between 2007 and 2011. From all responses obtained, a large proportion of participants were based in SMEs (N = 43), and these responses were used for the analysis. Statistical analysis using non-parametric tests was performed on questions with approximately interval scales. Qualitative data from participant responses were analysed to reveal emerging themes. The questionnaire results revealed that 60% of SME participants (mostly company directors or managers, including product or project managers) rated themselves as having low or no knowledge of health economics prior to the workshops but the rest professed at least medium knowledge. Clinical trials and cost analyses or cost-effectiveness studies were the most highly cited means by which SMEs aim to demonstrate value of products to purchasers. Purchasers were perceived to place most importance on factors of safety, expert opinion, cost-effectiveness and price. However many companies did not utilise formal decision-making tools to prioritise these factors. There was no significant dependence of the use of decision-making tools in general with respect to professed knowledge of health economics methods. SMEs did not state a preference for any particular aspect of potential value when deciding whether to develop a product. A majority of SMEs stated they would use a health economics tool. Research and development teams or marketing and sales

  7. Grand Challenges of Enterprise Integration

    Energy Technology Data Exchange (ETDEWEB)

    Brosey, W.D; Neal, R.E.; Marks, D.

    2001-04-01

    Enterprise Integration connects and combines people, processes, systems, and technologies to ensure that the right people and the right processes have the right information and the right resources at the right time. A consensus roadmap for Technologies for Enterprise Integration was created as part of an industry/government/academia partnership in the Integrated Manufacturing Technology Initiative (IMTI). Two of the grand challenges identified by the roadmapping effort will be addressed here--Customer Responsive Enterprises and Totally Connected Enterprises. Each of these challenges is briefly discussed as to the current state of industry and the future vision as developed in the roadmap.

  8. Gamma Ray Tomographic Scan Method for Large Scale Industrial Plants

    International Nuclear Information System (INIS)

    Moon, Jin Ho; Jung, Sung Hee; Kim, Jong Bum; Park, Jang Geun

    2011-01-01

    The gamma ray tomography systems have been used to investigate a chemical process for last decade. There have been many cases of gamma ray tomography for laboratory scale work but not many cases for industrial scale work. Non-tomographic equipment with gamma-ray sources is often used in process diagnosis. Gamma radiography, gamma column scanning and the radioisotope tracer technique are examples of gamma ray application in industries. In spite of many outdoor non-gamma ray tomographic equipment, the most of gamma ray tomographic systems still remained as indoor equipment. But, as the gamma tomography has developed, the demand on gamma tomography for real scale plants also increased. To develop the industrial scale system, we introduced the gamma-ray tomographic system with fixed detectors and rotating source. The general system configuration is similar to 4 th generation geometry. But the main effort has been made to actualize the instant installation of the system for real scale industrial plant. This work would be a first attempt to apply the 4th generation industrial gamma tomographic scanning by experimental method. The individual 0.5-inch NaI detector was used for gamma ray detection by configuring circular shape around industrial plant. This tomographic scan method can reduce mechanical complexity and require a much smaller space than a conventional CT. Those properties make it easy to get measurement data for a real scale plant

  9. Features of formation of the mechanism of introduction of the corporate social responsibility in activity the domestic industrial enterprises

    OpenAIRE

    Antoshko, T.

    2011-01-01

    Article opens essence of the corporate social responsibility (CSR), its components and principles CSR. The developed process model of formation of the mechanism of introduction CSR on the basis of disclosing principles of directions CSR. The mechanism of introduction CSR at the enterprise is developed. As criterion of an assessment of the mechanism of introduction CSR it has been suggested factor of activity of use of components of the mechanism of introduction CSR.

  10. The Scientific Approach to Formation of a Mechanism for Material Incentives in the System of Motivation at the Enterprises of Electrical Energy Industry

    Directory of Open Access Journals (Sweden)

    Kostіn Dmytro Yu.

    2017-08-01

    Full Text Available The article defines that, in order to continually improve the efficiency of use of managerial staff and to maintain sufficient motivation at the enterprises of electrical energy industry, it is necessary not only to evaluate but also to develop the mechanism for material incentives. In order to provide an efficient functioning of a system for improving the efficiency of managerial staff, it is necessary to form and implement an effective mechanism for management of its development. It has been concluded that the system for control of material incentives in the system of motivation at the enterprises of electrical energy industry indispensably includes: incoming control; ongoing control (in the case of long-term training programs; final control (may have both formal and informal forms; control of the use of acquired knowledge and skills in the working process. Evaluation of the efficiency of training is an important stage in the process of training the managerial staff. The main task of evaluating the efficiency of training is to analyze the information received, use it in preparing similar training programs as well as monitor the outcomes.

  11. The oil's comeback in the wake of the third oil shock - Class of enterprises and strategic group in the oil industry

    International Nuclear Information System (INIS)

    Greggio, R.; Maffei, B.

    2015-01-01

    The oil industry has been characterized for several decades by a deep-rooted paradox. The western multinational companies have been denied access to the most profitable oil-fields as a result of their nationalization which occurred mainly during the seventies: they extract nowadays only a small part of the world's oil. Yet, they have consolidated their financial, technological and strategic leadership, whereas oil companies from emerging countries do not have the same unrestricted freedom of action. As there has been no substantial change in the oil business hierarchy, oil companies should be presented as actually forming 'classes of enterprises' rather than be construed as 'strategic groups'. In other words, they constitute sets of relatively autonomous entities, which may sometimes conflict and also cooperate with each other, but whose strategies are excessively determined by geopolitical and industrial constraints which cannot be easily overcome. (authors)

  12. Experimental industrial signal acquisition board in a large scientific device

    Science.gov (United States)

    Zeng, Xiangzhen; Ren, Bin

    2018-02-01

    In order to measure the industrial signal of neutrino experiment, a set of general-purpose industrial data acquisition board has been designed. It includes the function of switch signal input and output, and the function of analog signal input. The main components are signal isolation amplifier and filter circuit, ADC circuit, microcomputer systems and isolated communication interface circuit. Through the practical experiments, it shows that the system is flexible, reliable, convenient and economical, and the system has characters of high definition and strong anti-interference ability. Thus, the system fully meets the design requirements.

  13. Enterprise Architecture beyond the Enterprise

    DEFF Research Database (Denmark)

    Tambo, Torben

    2017-01-01

    of this discipline is the topic of this paper. This paper is taking a point of departure in general theories of business-to-business relationships along with inter-organisational information systems, interoperability and business ecosystems. The general theories are applied to the Extended Enterprise Architecture...... organisational boundaries. A case is presented of an enterprise engaging in technology-based business process integration that in turn is explicated as enterprise architecture initiatives with both more and less powerful partners. This paper underlines the necessity to be able to have EA spanning initiatives......As the most enterprises are relying on relations to other enterprises, it is relevant to consider enterprise architecture for inter-organisational relations particularly those relations involving technology. This has been conceptualised as Extended Enterprise Architecture, and a systematic review...

  14. Lean assessment for manufacturing of small and medium enterprises (SMEs: A case study of electronics industry in the Northeast of Thailand

    Directory of Open Access Journals (Sweden)

    Chanchai Laoha

    2015-09-01

    Full Text Available This research was aimed at assessing for manufacturing a small and medium enterprise of electronic industry case study in the Northeast of Thailand. Electronic industry produces integrated circuits products (IC. We use lean assessment tools with 14 lean technique and tools. The value of lean assessment are scoring system derived from the malcolm baldrige national quality award, the two-dimensioned scoring system composing of the process; approach, deployment, learning, and integration. There are reveal operations of each of lean techniques and tools, and the performance; the 0 - 4 level needed to be improved in depth and hence would reflect operations requiring sustainable outcomes. This lean assessment is a systematic approach, assessor come to sit, examine operations from a lean perspective and assessed the situation as prior. The purposes of this visit were to introduced to production or factory manager or window person of SMEs who gave assessor a tour of the plant. Assessor also got a chance to explain lean assessment criteria on the shop floor. Assessor selects a value streaming line that produce most goods or main production line to assess. Assessor takes 1 day to assess and discuss the lean assessment. As a result, the lean assessment survey should be adjusted to fit the systems adaptively. Three plants of electronic industries were leanness of 1.06 or 26%. Five plants of garment industry were leanness of 1.13 or 28%. Four plants of shoe industry were leanness of 1.39 or 34%. Shoe industry had high leanness all unless quick changeover and multi skill. The quick changeover and multi skill were high score on garment industry. Electronics industry has not the lead but second in visual management, 5s, operation base layout, quick changeover, multi skill, standard operation procedures, and policy deployment.

  15. The Extended Enterprise concept

    DEFF Research Database (Denmark)

    Larsen, Lars Bjørn; Vesterager, Johan; Gobbi, Chiara

    1999-01-01

    This paper provides an overview of the work that has been done regarding the Extended Enterprise concept in the Common Concept team of Globeman 21 including references to results deliverables concerning the development of the Extended Enterprise concept. The first section presents the basic concept...... picture from Globeman21, which illustrates the Globeman21 way of realising the Extended Enterprise concept. The second section presents the Globeman21 EE concept in a life cycle perspective, which to a large extent is based on the thoughts and ideas behind GERAM (ISO/DIS 15704)....

  16. Use of discriminant analysis in estimating the risk of bankruptcy of meat industry enterprises Wykorzystanie analizy dyskryminacyjnej w ocenie ryzyka upadłości przedsiębiorstw przemysłu mięsnego

    Directory of Open Access Journals (Sweden)

    Feliks Wysocki

    2012-12-01

    Full Text Available The article presents the financial situation and risk of bankruptcy enterprises in the meat in-dustry. To assess the risk of bankruptcy meat industry companies discriminatory models analysis was applied. Studies have shown that not all of the selected Polish discriminatory models effectively indicate companies bankruptcy in meat industry. Therefore a model was built to assess the risk of bankruptcy for those companies.

  17. Short- and Long-Term Effects of Innovations on Enterprise Market Value: A Case of the Tourism Industry

    Directory of Open Access Journals (Sweden)

    Dawid Szutowski

    2014-01-01

    Full Text Available Abstract Innovations seem crucial for contemporary enterprises willing to achieve the objective of increasing firm’s value. The aim of this paper is to examine, both conceptually and empirically, the relationship between innovations and tourism enterprises’ market value. Tourism sector was taken into consideration in order to fulfill the existing research gap. This focused paper was based on relevant market data. Event study and calendar time portfolio approaches were chosen to test investors’ responses to innovation announcements. Six tourism companies listed on the Main Market of Warsaw Stock Exchange were examined within the six years research period and 34 innovation announcements were identified. Polish Press Agency database and Warsaw Stock Exchange databases were used to collect data. Results indicate that innovations affected positively investors’ valuation of tourism enterprises. The average event day market value change equaled 0.63% and differed considerably from the one-year one of 3.02% meaning that investors adjust their initial reaction over time. Initially investors reacted mostly to marketing, distributional and external relations innovations while within one-year period they attributed the most value to marketing and external relations ones.

  18. ENTERPRISE RESTRUCTURING AIM AND TYPES

    Directory of Open Access Journals (Sweden)

    S. P. Baranenko

    2011-01-01

    Full Text Available Enterprise restructuring is aimed at adapting it to market conditions and improving its competitiveness through selection of most effective model of using material, technical, technological, organizational, commercial, economical, financial, tax-related and other resources with due account of the demand. Restructuring classification signs and types as well as restructuring aims specific for industrial enterprises are provided for.

  19. Enterprise Information Systems as a Service: Re-engineering Enterprise Software as Product-Service System

    NARCIS (Netherlands)

    Wortmann, Johan; Don, H.; Hasselman, J.; J., Wilbrink; Frick, Jan; Laugen, Bjørge Timenes

    2012-01-01

    This paper draws an analogy between developments in enterprise software and in capital goods manufacturing industry. Many branches of manufacturing industry, especially automotive industry, have grown in maturity by moving from craftsmanship to mass production. These industries subsequently move

  20. Industry potential of large scale uses for peaceful nuclear explosives

    International Nuclear Information System (INIS)

    Russell, P.L.

    1969-01-01

    The industrial potential for peaceful uses of nuclear explosions entering a critical stage of development. Should Project Gasbuggy, an experiment to determine to what extent an underground nuclear explosion can stimulate the production of natural gas from low-permeability formations, prove a technical or economic success, a great step forward will have been made. Should other experiments now being considered in natural gas, oil shale, copper, coal, water resources, underground storage, and others, also demonstrate technical or economic advantage, it is conceivable to expect peaceful nuclear explosion to grow from our current rate of one or two experimental shots per year to hundreds of production explosions per year. This growth rate could be severely restricted or reduced to zero if public safety and environmental control cannot be exercised. (author)

  1. Industry potential of large scale uses for peaceful nuclear explosives

    Energy Technology Data Exchange (ETDEWEB)

    Russell, P L [Bureau of Mines, Denver, CO (United States)

    1969-07-01

    The industrial potential for peaceful uses of nuclear explosions entering a critical stage of development. Should Project Gasbuggy, an experiment to determine to what extent an underground nuclear explosion can stimulate the production of natural gas from low-permeability formations, prove a technical or economic success, a great step forward will have been made. Should other experiments now being considered in natural gas, oil shale, copper, coal, water resources, underground storage, and others, also demonstrate technical or economic advantage, it is conceivable to expect peaceful nuclear explosion to grow from our current rate of one or two experimental shots per year to hundreds of production explosions per year. This growth rate could be severely restricted or reduced to zero if public safety and environmental control cannot be exercised. (author)

  2. RESEARCH ON COMPLEX, LARGE INDUSTRIAL PROJECTS IN TRANSNATIONAL ENVIRONMENT

    Directory of Open Access Journals (Sweden)

    Florin POPESCU

    2016-12-01

    Full Text Available More and more projects from different industrial sectors developed in transnational environment are becoming more characterized as "complex". In recent years, there has been much discussion and controversy about the complexity of the projects, and, despite what has been written and said in various papers, journals and professional conferences, more confusion than clarification was created, complexity of projects being interpreted differently from one author to another. Most of the literature studied is based on linear, analytical and rational approach, focusing on the size of project management planning and control and actually less on projects that are characterized as taking place and grow into a dynamic socio-human environment in a continuous change. This study represents a critical review of existing theoretical models found in literature, highlighting their limitations. The output of this literature study represents an integration of different approaches concerning complexity under one umbrella to provide a common understanding of the evolution of this concept.

  3. Enterprise resource planning in construction: An evaluation of recent implementations

    NARCIS (Netherlands)

    Leuven, A.; Voordijk, Johannes T.; Akintoye, A

    2001-01-01

    In a large number of construction firms, Enterprise Resource Planning (ERP) systems have replaced non-integrated information systems by integrated and maintainable software. The implementation of ERP systems in the construction industry is a difficult task. So far, ERP implementations have yielded

  4. Joint enterprise and the role of the intermediator

    DEFF Research Database (Denmark)

    Bjørn, Pernille; Simonsen, Jesper

    2005-01-01

    , by analyzing the failure of inte-grating groupware into two global virtual teams within industry. We present an empirically driven interpretive case study conducted in a large distributed global or-ganization. Based on the empirical observations, we reveal two organizational factors challenging the inte......-gration process: The importance of joint enterprise and the role of the intermediator....

  5. Modelling borders of expediency of use of money funds for ensuring efficiency of marketing activity of industrial enterprises

    Directory of Open Access Journals (Sweden)

    Vereshchahіna Hanna V.

    2013-03-01

    Full Text Available The article offers improvement of methods of determining the limit exceeding which additional attraction of money funds does not ensure efficiency of marketing activity. These methods are based on the use of theoretical approach based on analysis of change of marginal utility. This approach lies in: 1 the use of the correlation-regression analysis of dependency of change of indicators of efficiency of enterprise activity on change of the volume of resources (money funds directed at conduct of marketing activity; and 2 determination of first derivatives (extreme values, if possible of relevant functions. Practical use of the offered methods allows determination of the maximum volume of investments into the marketing activity required for ensuring its efficiency.

  6. Effective algorithm for solving complex problems of production control and of material flows control of industrial enterprise

    Science.gov (United States)

    Mezentsev, Yu A.; Baranova, N. V.

    2018-05-01

    A universal economical and mathematical model designed for determination of optimal strategies for managing subsystems (components of subsystems) of production and logistics of enterprises is considered. Declared universality allows taking into account on the system level both production components, including limitations on the ways of converting raw materials and components into sold goods, as well as resource and logical restrictions on input and output material flows. The presented model and generated control problems are developed within the framework of the unified approach that allows one to implement logical conditions of any complexity and to define corresponding formal optimization tasks. Conceptual meaning of used criteria and limitations are explained. The belonging of the generated tasks of the mixed programming with the class of NP is shown. An approximate polynomial algorithm for solving the posed optimization tasks for mixed programming of real dimension with high computational complexity is proposed. Results of testing the algorithm on the tasks in a wide range of dimensions are presented.

  7. Invariant protection of high-voltage electric motors of technological complexes at industrial enterprises at partial single-phase ground faults

    Science.gov (United States)

    Abramovich, B. N.; Sychev, Yu A.; Pelenev, D. N.

    2018-03-01

    Development results of invariant protection of high-voltage motors at incomplete single-phase ground faults are observed in the article. It is established that current protections have low action selectivity because of an inadmissible decrease in entrance signals during the shirt circuit occurrence in the place of transient resistance. The structural functional scheme and an algorithm of protective actions where correction of automatic zero sequence currents signals of the protected accessions implemented according to the level of incompleteness of ground faults are developed. It is revealed that automatic correction of zero sequence currents allows one to provide the invariance of sensitivity factor for protection under the variation conditions of a transient resistance in the place of damage. Application of invariant protection allows one to minimize damages in 6-10 kV electrical installations of industrial enterprises for a cause of infringement of consumers’ power supply and their system breakdown due to timely localization of emergency of ground faults modes.

  8. Scientific critique of the paper 'ERP and management accounting changes of industrial enterprises in Serbia' published in the Journal Industrija, April-June 2012 vol. 30(2

    Directory of Open Access Journals (Sweden)

    Marjanović Vojislav

    2012-09-01

    Full Text Available SAP software solutions are one of the most significant representatives of ERP software solutions. With its software solution SAP ERP, the company SAP Inc. is also present in the business practice of Serbia's industry enterprises. In the last fourteen years, a considerable number of companies in Serbia have implemented this software solution, because it provides a high level of transparency in financial accounting, cost accounting and production planning reports, which considerably facilitates the decision-making process. SAP software solutions are modularly structured, which gives the customers a possibility to focus their attention on specific business areas, of their own interest. However, the cohesion of a system is not threatened, because SAP software solutions ensure that the information can be processed in all modules in real time.

  9. Identifying and prioritizing export barriers to small and medium enterprises (SMEs regarding food Industry based on national competition diamond Cole Porter model

    Directory of Open Access Journals (Sweden)

    Hossein Rahmanyyoushanlouei

    2013-07-01

    Full Text Available Diamond model Cole Porter and approaches after that have been used in several investigations in most countries and the credit behind the model has been repeatedly confirmed. But any theory is contended with regard to the conditions and time scope of their own; and gets corrected with the emergence of new features and based on the environment of reform. Current study has tried to identify and prioritize export barriers to small and medium enterprises (SMEs regarding food industry based on national competition diamond Cole Porter model in Iran (East Azerbaijan province and its subject pool were 266 people who were given the questionnaires. The method used to analyze and get information from research was exploratory confirmation factor, particularly from the equations structural theories for examination. With regard to the results achieved all hypotheses were confirmed.

  10. Education and Enterprise.

    Science.gov (United States)

    Emery, John S.

    1987-01-01

    In Australia, one effect of reduced government funding is to stimulate enterprise in higher education. This paper supports extending cooperation and joint ventures with industry and commerce and initiating new practices, such as exporting educational services or establishing a private education sector. A major drawback is the equity issue.…

  11. Trabajo Multidisciplinar Universidad-Empresa en Agroindustria Cafetera del Valle del Cauca, Colombia Multidisciplinary Collaboration University-Industry in a Coffee Growing Enterprise of Valle del Cauca, Colombia

    Directory of Open Access Journals (Sweden)

    Jaime A. Aguilar Zambrano

    2009-12-01

    Full Text Available Este artículo presenta una metodología y los resultados obtenidos de un proyecto de actuación multidisciplinar en una relación universidad-empresa para favorecer la innovación. Desde la universidad participaron profesores y estudiantes de los Programas de Ingeniería Electrónica e Ingeniería Industrial, y la empresa fue una cooperativa de cultivadores de café orgánico llamada Asociación ACOC, ubicada en el centro del Valle del Cauca en Colombia. Se plantearon dos hipótesis para el proyecto, la primera: el trabajo multidisciplinar genera mejores resultados en la solución de problemas de las pequeñas empresas porque contempla el problema en una forma sistémica; la segunda: el trabajo independiente de cada disciplina una vez identificada la problemática técnica provee resultados satisfactorios para el conjunto del problema. La primera hipótesis fue verificada y la segunda se verificó parcialmente. Se concluye que las relaciones universidad-empresa con un aporte tecnológico multidisciplinar mejoran significativamente el trabajo de la pequeña empresa. La empresa debe involucrarse de manera activa para que los resultados perduren en el tiempo y la visión sistémica de los problemas fortalece el trabajo de las pequeñas empresas.This article shows a methodology and the results obtained from a multidisciplinary project between the University and Enterprise which encourages innovation. The University participated with its faculty members and students enrolled in the programs of industrial engineering and electronic engineering, and the Enterprise was a group of organic coffee farmers (called by its founders Asociación ACOC located in the center of Valle del Cauca, Colombia. Two hypotheses were formulated for the project. The first, multidisciplinary work produces better results in solving problems of small businesses because it considers the problem in a systemic way. The second, independent work from each field of study, once the

  12. A Decision-Making Model for Evaluating and Selecting Suppliers for the Sustainable Operation and Development of Enterprises in the Aerospace Industry

    Directory of Open Access Journals (Sweden)

    Chin-Tsai Lin

    2018-03-01

    Full Text Available Due to rigorous quality requirements and high unit prices, the manufacture of machines used in the aerospace industry is characterized by a high entry threshold, high risk and a long payback period. A good decision-making model for evaluating and selecting suppliers is vital for sustainable enterprise development. Therefore, this study presents a new two-stage model for evaluating and selecting suppliers in the aerospace industry. In the first stage, a hierarchical structure is built with five main and 16 sub-criteria for supplier evaluation and selection following the modified Delphi method; in the second stage, the best alternative solution is selected following the analytic network process (ANP method. Finally, this study verifies the feasibility of the above model based on the purchase of high-precision and high-cost 3D measuring tools by Aerowin Technology Corporation, which is listed on the Taiwan Stock Exchange. The results show that the five criteria in the above model are ranked by their degree of importance, as follows: quality > cost > delivery > marketing > organizational planning. The findings of this research can be used as a reference for decision-making during the purchase of high-precision and high-priced machine tools in the aerospace industry.

  13. THE USE EFFICIENCY OF FINANCIAL LEASING FOR THE RENEWAL OF FIXED CAPITAL OF THE RAILWAY INDUSTRY ENTERPRISES

    Directory of Open Access Journals (Sweden)

    V. I. Strilets

    2009-12-01

    Full Text Available In the article the dynamics of development and global structure of the leasing market are analyzed, the advantages of using the financial leasing for upgrading the fixed capital of railway industry are formulated.

  14. Universal methods of creation of functionally developed management systems of special purpose of industrial enterprises and production associations and their use when planning and introducing the subsystem of accounting and analytical support

    Directory of Open Access Journals (Sweden)

    Tkachenko Sergіy A.

    2013-03-01

    Full Text Available The goal of the article lies in formation of a paradigm (sample of universal methods of creation of functionally developed management systems of special purpose of industrial enterprises and production associations and their use when planning and introducing the subsystem of accounting and analytical support. Analysing, systemising and generalising scientific works of many economists, the article describes ways of solution of the problem of organisation of works on planning and introducing the accounting function at industrial enterprises and in production associations – individual planning, increase of a number of organisations that plan functionally developed accounting subsystem and training of relevant specialists. In the result of the study the article realises an important direction of development in improvement of organisation of accounting and economic and analytical support at industrial enterprises and in production associations based on uniformity of project decisions on the subsystem of the accounting and analytical support and functional development of the process of its creation. The issue of organisation of the calculation process while planning and introducing the accounting function in functionally developed management systems of special purpose of industrial enterprises and production associations is of special urgency among the prospects of further studies in this direction. Further development of accounting can result in replacement of traditional accounting with functionally developed subsystem of accounting and analytical support with intensive use of the concept of methodologically justified paradigmatic approach.

  15. Information technology use in the food and beverage industry: a planning model for small and medium manufacturing enterprises

    Directory of Open Access Journals (Sweden)

    Gibson Barcelos Reggiani

    2011-12-01

    Full Text Available The determinant variables of the performance of small and medium companies (SMEs are associated to aspects of entrepreneurial capacity, regional economy, positioning in the market and type of operational management. These aspects are all influenced by the use of information technology (IT. This paper presents the intervening factors in the management process of these companies and a model that contemplates IT as an integrant part of the enterprise planning. The model, based on the Competence Theory, identifies in the business context of the company the critical factors to its success, the capacities and resources necessary to its sustain and the metrical which should reflect the evolution of the results of the company in relation to its objectives. Associated to these capacities IT resources are identified to be applied to upgrade the existing competences, or to develop new ones, according to the strategic focus and positioning of the company in the market. It is presented also a case study of a manufacturing SME of beverages where the model is being applied. The case shows some metrical results which certify the effectiveness of the model, although the short time of implantation. In spite of still being in the validation phase, with implementations in companies of other sectors, the model has shown favorable aspects mainly due to its  cognitive and recurrent approach, which is well appropriate to the management process of  SMEs.

  16. Principles of designing cyber-physical system of producing mechanical assembly components at Industry 4.0 enterprise

    Science.gov (United States)

    Gurjanov, A. V.; Zakoldaev, D. A.; Shukalov, A. V.; Zharinov, I. O.

    2018-03-01

    The task of developing principles of cyber-physical system constitution at the Industry 4.0 company of the item designing components of mechanical assembly production is being studied. The task has been solved by analyzing the components and technologies, which have some practical application in the digital production organization. The list of components has been defined and the authors proposed the scheme of the components and technologies interconnection in the Industry 4.0 of mechanical assembly production to make an uninterrupted manufacturing route of the item designing components with application of some cyber-physical systems.

  17. Barriers, drivers and decision-making process for industrial energy efficiency: A broad study among manufacturing small and medium-sized enterprises

    International Nuclear Information System (INIS)

    Trianni, Andrea; Cagno, Enrico; Farné, Stefano

    2016-01-01

    Highlights: • Barriers and drivers vary along the decision-making process of EEM adoption. • Economic barriers, awareness and behavioural are most critical. • Beside economic drivers, major relevance of regulatory and vocational training. • Importance of stakeholders providing technical support. • Barriers and drivers are different according to several firm characteristics. - Abstract: Energy efficiency has been recognized as a primary means to increase the competitiveness of the industrial sector, and in particular for small and medium-sized enterprises (SMEs), in which energy efficiency measures (EEMs) are scarcely implemented. For this reason, future policies should carefully address such issue. Hence, it is really crucial to have a precise and punctual knowledge of the barriers to be tackled in the decision-making process of adopting an EEM and the drivers to be promoted. This study discussed the findings from a broad investigation within 222 manufacturing SMEs located in a Northern Italy region. Beside economic issues particularly affecting SMEs, awareness and behavioural issues emerge as critical, affecting the very first steps of the decision-making process, related to the punctual identification and evaluation of plausible EEMs. The support from manufacturers, technology suppliers, installers and ESCOs supporting SMEs through vocational training drivers (e.g. technical support) is really important to tackle such issues. More generally, beside financial institutions, the supply chain of technologies is recognized as particularly useful for supporting enterprises in the adoption of EEMs. Additionally, having previously conducted energy audit and implemented EEMs are critical factors able to highlight non-economic barriers and drivers. Therefore, the promotion of EEMs will necessarily imply a further effort in pointing out the so-called non-energy benefits (NEBs) from the implementation of EEMs. Finally, our study reveals that smaller and non

  18. Enterprise systems' life cycle in pursuit of resilient smart factory for emerging aircraft industry: a synthesis of Critical Success Factors'(CSFs), theory, knowledge gaps, and implications

    Science.gov (United States)

    Rashid, Asif; Masood, Tariq; Erkoyuncu, John Ahmet; Tjahjono, Benny; Khan, Nawar; Shami, Muiz-ud-din

    2018-02-01

    The research aims to investigate business value critical success factors (CSFs) of enterprise systems (ES) through their life cycle in pursuit of resilient smart factory for emerging aircraft industry. This article provides an extensive literature analysis of past 22 years based on conscientious criteria of authors: (i) who have published strategic content relevant to CSFs, (ii) received more than 300 citations and (iii) concurrently published two or more papers relevant to ES CSFs. The most cited strategic CSFs were termed as classical CSFs. The 22 CSFs were identified, validated and synthesised for better understanding of success across life cycle by aircraft industry experts. The top 10 empirically verified CSFs have numerous differences with past generic classical CSFs. This article canvases real insights of two distinct views: process and variance approaches of the ES CSFs. The process approach, which is a neglected research area, facilitates the researchers for identification of ES life cycle process coupled with a view of resource deployment when it is needed the most. While the variance approach facilitates practitioners and researchers in finding out which resource (CSF) is relatively more important. The significant findings for ES life cycle can help the practitioners and researchers to make rational decisions throughout the ES life cycle.

  19. Jobs, gender and small enterprises in Bangladesh : factors affecting women entrepreneurs in small and cotage industries in Bangladesh

    OpenAIRE

    Karim, Nilufer A

    2001-01-01

    Analyses the constraints faced by women entrepreneurs in Bangladesh, followed by an overview on programmes and projects supporting women entrepreneurs, including training, advice on technology, marketing and financial support. Suggests practical solutions and recommendations that could ease the situation of women in small and cottage industries.

  20. Implementing and Integrating a Clinically-Driven Electronic Medical Record (EMR for Radiation Oncology in a Large Medical Enterprise

    Directory of Open Access Journals (Sweden)

    John Paxton Kirkpatrick

    2013-04-01

    Full Text Available Purpose/Objective: While our department is heavily invested in computer-based treatment planning, we historically relied on paper-based charts for management of Radiation Oncology patients. In early 2009, we initiated the process of conversion to an electronic medical record (EMR eliminating the need for paper charts. Key goals included the ability to readily access information wherever and whenever needed, without compromising safety, treatment quality, confidentiality or productivity.Methodology: In February, 2009, we formed a multi-disciplinary team of Radiation Oncology physicians, nurses, therapists, administrators, physicists/dosimetrists, and information technology (IT specialists, along with staff from the Duke Health System IT department. The team identified all existing processes and associated information/reports, established the framework for the EMR system and generated, tested and implemented specific EMR processes.Results: Two broad classes of information were identified: information which must be readily accessed by anyone in the health system versus that used solely within the Radiation Oncology department. Examples of the former are consultation reports, weekly treatment check notes and treatment summaries; the latter includes treatment plans, daily therapy records and quality assurance reports. To manage the former, we utilized the enterprise-wide system , which required an intensive effort to design and implement procedures to export information from Radiation Oncology into that system. To manage "Radiation Oncology" data, we used our existing system (ARIA, Varian Medical Systems. The ability to access both systems simultaneously from a single workstation (WS was essential, requiring new WS and modified software. As of January, 2010, all new treatments were managed solely with an EMR. We find that an EMR makes information more widely accessible and does not compromise patient safety, treatment quality or confidentiality

  1. Supply side management innovation: —Analysis on Enterprises in Scientific Industry Park Based on Market Orientation

    Science.gov (United States)

    Li, Xing; Mao, Fenlan; Lin, Mian; Yadi, Nan

    2017-12-01

    This research presents a conceptual framework for incorporating organizational learning and innovations as the mediating variables between market orientation and organizational performance. The samples of this study include 145 companies from the information technology industry in the Scientific Industry Parks. The global model fit is acceptable. This empirical result supports the constructs mentioned above. 1. Market orientation has a positive and direct impact on organizational learning, administrative and technical innovation. 2. Organizational learning has a positive and direct impact on administrative and technical innovation, but with no statistically significant direct impact on performance. 3. Organizational learning does have a positive and indirect impact on performance by means of organizational innovations. 4. It is not statistically significant that the impact of the two innovation types (both administrative and technical) interact with each other.

  2. THE ALGORITHM IMPLEMENTATION OF THE DIVERSIFICATION STRATEGY IN SMALL AND MEDIUM-SIZED ENTERPRISES (FOR EXAMPLE, THE HOSPITALITY INDUSTRY

    Directory of Open Access Journals (Sweden)

    Наталья Николаевна Масюк

    2013-09-01

    Full Text Available Diversification in small businesses in the general sense is an extension of business activities to new areas of business (expanding the range of products, types of services provided, etc.. Application of the strategy of diversification in the small and medium business is justified in cases where the industry does not give us opportunities for further growth or when growth opportunities outside the industry more attractive. To determine whether diversification overdue and justified, the entrepreneur must clearly define the algorithm for their actions.Purpose: To determine the algorithm implementation of the strategy of diversification.Methodology: Desk research.Results: The developed algorithm.Practical implications: Management.DOI: http://dx.doi.org/10.12731/2218-7405-2013-9-19

  3. The Triple Helix Model as an Effective Instrument for the Innovation Development of Industrial Enterprises within the National Economy

    Directory of Open Access Journals (Sweden)

    M. N. Dudin

    2014-06-01

    Full Text Available In the context of the transformation of the economies of developed countries towards a new type – knowledge economics – there has emerged the need for the creation and development of effective mechanisms for producing and commercializing knowledge based on the coordination of state, corporate, and academic interests. The subject of the article is topical, since innovation infrastructure is a fundamental factor in innovation development, and its development is a priority focus area in the state’s economic policy. In an era of transformations in the practice of production and knowledge transfer, it is important to analyze the links between theoretical knowledge and industrial information. The article provides a rationale for the fact that the model for the innovation development of industry (the Triple Helix Model, thanks to the multitude of entities engaged in innovation activity and the building of an extensive horizontally structured network, into which the elements of the “triple helix” are integrated, is capable of ensuring a synergistic effect and, consequently, is an effective instrument for boosting the innovation development of industry.

  4. Modification of the method of construction of value chain industrial enterprises with regard to financial involvement of staff of logistics

    Directory of Open Access Journals (Sweden)

    Butrin A.G.

    2017-01-01

    Full Text Available The article presents the author’s method of building an efficient value chain in an industrial plant, based on a well-known concept of the value of M. Porter, and other members of the Harvard Business School. Its novelty lies in the fact that, first, the operation captured still poorly known financial stream; second, extended value chain border due to the inclusion of all members of the value within the supply chain management concept. This will speed up capital turnover and reduce costs in terms of integration of all participants in the value chain. Cash flow still remains little known in the concepts of financial management and financial logistics. However, the adaptation of key provisions in the crisis lie is the effective use of financial logistics methods.

  5. IMPROVEMENT OF THE STRATEGY OF INNOVATIVE DEVELOPMENT OF ENTERPRISES OF THE MILITARY-INDUSTRIAL COMPLEX OF RUSSIA

    Directory of Open Access Journals (Sweden)

    K. B. Dobrova

    2015-01-01

    Full Text Available In article discusses one of the problems of the modern economy – features of innovative development corporations in Russia. This article examines the activities of Russian corporations in the conditions of transition to innovative development of the economy (on the example Corporation «Rostec». Examines the economic, legal and social aspects of the defi nition of «Corporation». Describes the main problems and tendencies of innovative development of Russian corporations in the current economic conditions. In modern conditions one of the most important institutions in economic development is Corporation, and its key factor is innovation. Innovation and innovation allow industrial corporations to move to a new technological level, but to achieve success in competition is not enough to have only technical superiority, equally important is innovation in the management of the Corporation.

  6. Analysis of interrelationship between the protein fractions content and blood serum immunoglobulins with irradiation of atomic industry enterprises workers

    International Nuclear Information System (INIS)

    Tel'nov, V.I.

    1996-01-01

    989 workers of atomic industry at the age from 35 to 78 years old subjected to the general external gamma radiation and incorporation of plutonium 239 in a wide range of doses about 17-40 years ago have been examined for the protein indices with the radiation effect bearing in mind nine non-radiation factors. The step-by-step regression analysis revealed a positive linear link for the total protein level, absolute content of alpha-1-globulins with the total dose of external gamma radiation. Increasing of serum proteins entropy, correlated with external radiation by protein shifts effect, had not coincided with its age increasing. The influence of plutonium-239 incorporation on the examined protein parameters was not found

  7. A 2.4-GHz ISM RF and UWB hybrid RFID real-time locating system for industrial enterprise Internet of Things

    Science.gov (United States)

    Zhai, Chuanying; Zou, Zhuo; Zhou, Qin; Mao, Jia; Chen, Qiang; Tenhunen, Hannu; Zheng, Lirong; Xu, Lida

    2017-07-01

    This paper presents a 2.4-GHz radio frequency (RF) and ultra-wide bandwidth (UWB) hybrid real-time locating system (RTLS) for industrial enterprise Internet of Things (IoT). It employs asymmetric wireless link, that is, UWB radio is utilised for accurate positioning up to 10 cm in critical sites, whereas 2.4-GHz RF is used for tag control and coarse positioning in non-critical sites. The specified communication protocol and the adaptive tag synchronisation rate ensure reliable and deterministic access with a scalable system capacity and avoid unpredictable latency and additional energy consumption of retransmissions due to collisions. The tag, consisting of a commercial 2.4-GHz transceiver and a customised application-specific integrated circuit (ASIC) UWB transmitter (Tx), is able to achieve up to 3 years' battery life at 1600 tags per position update second with 1000 mAh battery in one cluster. The time difference of arrival (TDoA)-based positioning experiment at UWB radio is performed on the designed software-defined radio (SDR) platform.

  8. To the problem of typology of the riskogenic behaviour (analysis on the example of an industrial enterprise of Perm region

    Directory of Open Access Journals (Sweden)

    E.А. Ryazanova

    2016-06-01

    Full Text Available This article offers a method for the typology of riskogenic behavior of employees. The method is based on the identification of the common patterns of behavior in terms of alcohol consumption, smoking, access to medical care, nutrition and physical activity. Three types of behavior, characterized by different levels of self-preservation, self-destructive activities and the degree of riskogenics, are given in this study. The first type is "low level of riskogenics, passive", that combines low levels of physical activity, high culture of consumption of alcoholic beverages, absence of smoking experience and correct eating habits. The second type – "average level of riskogenics, active" assumes daily exercises or sport activities, long walks in the fresh air, absence of dependence on alcohol beverages at severe nicotine dependence and absence of proper nutrition practices. A third type is "high level of riskogenic, passive" that involves systematic abuse of alcohol, heavy smoking, very poor nutrition and lack of exercise. The proposed typology was tested in an industrial plant producing rubber products for industrial and national consumption. The continuous sociological survey of employees of working specialties (n = 63 has been conducted. The parameterization of the behavioral practices of the respondents in the field of health (the indicators reflecting the average daily consumption of alcohol, nicotine uptake, integral index of food and motor activity were calculated as well as the cluster analysis have been performed. The riskogenics first type comprises 30 % of responded employees, the second – 52 %, the third – 18 %. For each type a social portrait has been composed. The analysis of relations between the type of riscogenic behavior of the employees and their health status indexes has been conducted.

  9. Industrial clusters and social networks and their impact on the performance of micro- and small-scale enterprises: evidence from the handloom sector in Ethiopia

    NARCIS (Netherlands)

    Ali, M.A.

    2012-01-01

    This study empirically investigates how clustering and social networks affect the performance of micro- and small-scale enterprises by looking at the evidence from Ethiopia. By contrasting the performance of clustered micro enterprises with that of dispersed ones, it was first shown that

  10. SOURCES OF ENTERPRISE VALUE

    Directory of Open Access Journals (Sweden)

    Viorica Mădălina Ion

    2016-05-01

    Full Text Available The value of the enterprise has an increased importance in business valuation, so maximizing it becomes a priority for the interested parties, such as its shareholders or investors. The purpose of this article is the analysis of the sources of enterprise value and its factors, in order to understand the causes of the decrease or the possibilities for maximizing the enterprise value, passing over the main concepts in the literature. The analysis refers to the listed companies on the Bucharest Stock Exchange (BVB from the energy sector, including the largest Romanian company as per its capitalization, OMV Petrom. The research took into account the fact that the analysis of a large company with a long history is facilitated by the existence of multi-annual information, unlike the firms in the early life cycle operating in an emerging market.

  11. Argue internal audit on how to promote the nuclear power enterprise internal control

    International Nuclear Information System (INIS)

    Li Xiaoming

    2012-01-01

    In order to strengthen and standardize enterprise internal control, improve the management level and risk prevention ability, five departments jointly established the basic rules of internal control in enterprises, large and medium-sized enterprises as the national power enterprise, the enterprise internal audit executive power in strengthening and perfecting internal control, and in the enterprise internal control of play an active role. (author)

  12. Corporate Social Responsibility in the Oil Industry-Comparative Case Studies Of Chinese Oil Enterprises In Five Latin American Countries

    Science.gov (United States)

    Wu, Wenyuan

    This dissertation evaluates and compares social and environmental records of Chinese national oil companies (NOCs) operating in Latin America from the early 21st century to 2015. Five countries representing the entirety of Chinese NOCs' physical presence are selected: Peru, Ecuador, Argentina, Colombia, and Venezuela. The project discovers that Chinese NOCs demonstrate the highest level of social responsibility in Peru and the lowest in Venezuela, with the other three countries constituting intermediate observations. The differences in social responsibility records are then causally traced to variances in the host countries' regulatory frameworks and civil society capacities. Chinese NOCs are found to be most willing to commit to social responsibility under an enabling regulatory environment in which the host government facilitates competitiveness and decentralization in its hydrocarbons industry while upholding inclusive policies regarding its civil society. Moreover, these NOCs are most likely to follow through on their CSR commitments when faced with a unified and collaborative civil society. These major findings yield important policy lessons for both the host government and the civil society in developing countries with abundance in energy resources.

  13. Design of General-purpose Industrial signal acquisition system in a large scientific device

    Science.gov (United States)

    Ren, Bin; Yang, Lei

    2018-02-01

    In order to measure the industrial signal of a large scientific device experiment, a set of industrial data general-purpose acquisition system has been designed. It can collect 4~20mA current signal and 0~10V voltage signal. Through the practical experiments, it shows that the system is flexible, reliable, convenient and economical, and the system has characters of high definition and strong anti-interference ability. Thus, the system fully meets the design requirements..

  14. Understanding Enterprise Architecture with Topic Modeling

    DEFF Research Database (Denmark)

    Nardello, Marco; Møller, Charles; Gøtze, John

    2018-01-01

    The next 3 years will be more important than the last 50 due to the digital transformation across industries. Enterprise Architecture (EA), the discipline that should lead enterprise responses to disruptive forces, is far from ready to drive the next wave of change. The state of the art in the di......The next 3 years will be more important than the last 50 due to the digital transformation across industries. Enterprise Architecture (EA), the discipline that should lead enterprise responses to disruptive forces, is far from ready to drive the next wave of change. The state of the art...

  15. Enterprise architecture approach to mining companies engineering

    Directory of Open Access Journals (Sweden)

    Ilin’ Igor

    2017-01-01

    Full Text Available As Russian economy is still largely oriented on commodities production, there are a lot of cities where mining and commodity-oriented enterprises are the backbone of city economy. The mentioned enterprises mostly define the life quality of citizens in such cities, thus there are high requirements for engineering of city-forming enterprises. The paper describes the enterprise architecture approach for management system engineering of the mining enterprises. The paper contains the model of the mining enterprise architecture, the approach to the development and implementation of an integrated management system based on the concept of enterprise architecture and the structure of information systems and information technology infrastructure of the mining enterprise.

  16. Automated Bug Assignment: Ensemble-based Machine Learning in Large Scale Industrial Contexts

    OpenAIRE

    Jonsson, Leif; Borg, Markus; Broman, David; Sandahl, Kristian; Eldh, Sigrid; Runeson, Per

    2016-01-01

    Bug report assignment is an important part of software maintenance. In particular, incorrect assignments of bug reports to development teams can be very expensive in large software development projects. Several studies propose automating bug assignment techniques using machine learning in open source software contexts, but no study exists for large-scale proprietary projects in industry. The goal of this study is to evaluate automated bug assignment techniques that are based on machine learni...

  17. Effective Communication Practices during Organizational Transformation: A Benchmarking Study of the U.S. Automobile Industry and U.S. Naval Aviation Enterprise

    National Research Council Canada - National Science Library

    King, Cynthia L; Brook, Douglas A; Hartge, Timothy D

    2007-01-01

    .... Navy, the sponsor of the study, has been engaged in Enterprise transformation efforts for several years, introducing changes to improve combat readiness while simultaneously reducing costs and increasing efficiencies...

  18. Welche Kompetenzen brauchen betriebliche Weiterbildner in Zukunft? Ergebnisse einer Delphi-Studie in einem Industrieunternehmen (Qualifications Needed by Educational Staff Working in the Field of Further Education in the Industrial Sector--Results of a Delphi-study Carried out in an Industrial Enterprise).

    Science.gov (United States)

    Harteis, Christian; Prenzel, Manfred

    1998-01-01

    Attempts to reveal the qualifications that will become important, due to technological change and growing internationalization of competition, for trainers (educational staff) in industrial enterprises. Indicates that the results lead to a view of further education within firms as a service that is subject to competition on the open market. (CMK)

  19. Particle physics and polyedra proximity calculation for hazard simulations in large-scale industrial plants

    Science.gov (United States)

    Plebe, Alice; Grasso, Giorgio

    2016-12-01

    This paper describes a system developed for the simulation of flames inside an open-source 3D computer graphic software, Blender, with the aim of analyzing in virtual reality scenarios of hazards in large-scale industrial plants. The advantages of Blender are of rendering at high resolution the very complex structure of large industrial plants, and of embedding a physical engine based on smoothed particle hydrodynamics. This particle system is used to evolve a simulated fire. The interaction of this fire with the components of the plant is computed using polyhedron separation distance, adopting a Voronoi-based strategy that optimizes the number of feature distance computations. Results on a real oil and gas refining industry are presented.

  20. A central solar-industrial waste heat heating system with large scale borehole thermal storage

    NARCIS (Netherlands)

    Guo, F.; Yang, X.; Xu, L.; Torrens, I.; Hensen, J.L.M.

    2017-01-01

    In this paper, a new research of seasonal thermal storage is introduced. This study aims to maximize the utilization of renewable energy source and industrial waste heat (IWH) for urban district heating systems in both heating and non-heating seasons through the use of large-scale seasonal thermal

  1. ENTERPRISES DEVELOPMENT: MANAGEMENT MODEL

    Directory of Open Access Journals (Sweden)

    Lina Shenderivska

    2018-01-01

    Full Text Available The paper’s purpose is to provide recommendations for the effective managing the companies’ development taking into account the sectoral key elements’ transformation. Methodology. The enterprise profits’ econometric simulation is conducted to determine the most significant factors influencing their development. According to the model testing result, their multicollinearity was revealed. To get rid of the multicollinearity phenomenon from the profit models, isolated regressors are excluded, namely, return on assets, material returns, return on equity. To obtain qualitative models with a small error of model parameters estimation and, accordingly, high reliability of the conclusion about the interrelation between the factors of the model and the resulting feature, factors in the income model that are not closely interconnected, that is, not multicollinear, are included. Determination coefficients R2 and F-criterion were calculated for model quality checking. The modern printing enterprises of Ukraine key elements, connected with integration into the global information space, are analysed. Results. The interrelation between a company’s development and earning capacity is identified in the study. The profit importance as the main source for enterprise financing is substantiated. Factors that have the greatest impact on the enterprises’ development are labour productivity, financial autonomy, working capital turnover, and the character of their influence is most adequately reflected by the power model. Peculiarities of the enterprises’ activity include increased competition at the inter-branch level, poorly developed industrial relations, and the own sources of financing activities shortage. Practical implications. Based on information on the most significant developmental impact factors, directions for perspective enterprises development for their competitiveness increase are proposed: diversification based on the activity expansion

  2. Valuation of energy enterprises

    International Nuclear Information System (INIS)

    Kjaerland, Frode

    2005-01-01

    Since the deregulation of the energy market in Norway, there has been a number of mergers and acquisitions of energy enterprises. In all these transaction the companies has been valued. The value has often been not insignificant above what the value should be according to traditional methods of valuation. What is the explanation of this premium. This paper describes a project which has as goal to test weather real option theory can explain the difference between actual price and theoretical value based on conventional discounted cash flow methods. This is supposed to be compared with an accounting based residual income approach of valuation. The goal is to see if a real option approach better can explain the value of the transactions in this industry in the past decade, and thereby better understand the value and value components of these enterprises. This is a first draft, and this paper will be rewritten and revised by the presentation in the conference ultimo August 2005. (Author)

  3. The emerging role of large eddy simulation in industrial practice: challenges and opportunities.

    Science.gov (United States)

    Hutton, A G

    2009-07-28

    That class of methods for treating turbulence gathered under the banner of large eddy simulation is poised to enter mainstream engineering practice. There is a growing body of evidence that such methods offer a significant stretch in industrial capability over solely Reynolds-averaged Navier-Stokes (RANS)-based modelling. A key enabling development will be the adaptation of innovative processor architectures, resulting from the huge investment in the gaming industry, to engineering analysis. This promises to reduce the computational burden to practicable levels. However, there are many lessons to be learned from the history of the past three decades. These lessons should be analysed in order to inform, if not modulate, the unfolding of this next cycle in the development of industrial modelling capability. This provides the theme for this paper, which is written very much from the standpoint of the informed practitioner rather than the innovator; someone with a strong motivation to improve significantly the competence with which industrial turbulent flows are treated. It is asserted that the reliable deployment of the methodology in the industrial context will prove to be a knowledge-based discipline, as was the case with RANS-based modelling, if not more so. The community at large should collectively make great efforts to put in place that knowledge base from which best practice advice can be derived at the very start of this cycle of advancement and continue to enrich it as the cycle progresses.

  4. Enterprise Information Systems Outsourcing

    DEFF Research Database (Denmark)

    Svejvig, Per; Pries.Heje, Jan

    2009-01-01

    Outsourcing is now a feasible mean for Enterprise Information Systems (EIS) cost savings, but do however increase the complexity substantially when many organizations are involved. We set out to study EIS outsourcing with many interorganizational partners in a large Scandinavian high-tech organiz......Outsourcing is now a feasible mean for Enterprise Information Systems (EIS) cost savings, but do however increase the complexity substantially when many organizations are involved. We set out to study EIS outsourcing with many interorganizational partners in a large Scandinavian high...... the rational cost saving explanation; but then with a more careful analysis focusing on institutional factors, other explanations "behind the curtain" were revealed, such as management consultants with a "best practice" agenda, people promoting outsourcing thereby being promoted themselves, and outside...

  5. Enterprise Information Systems Outsourcing

    DEFF Research Database (Denmark)

    Pries-Heje, Jan; Svejvig, Per

    2009-01-01

      Outsourcing is now a feasible mean for Enterprise Information Systems (EIS) cost savings, but do however increase the complexity substantially when many organizations are involved. We set out to study EIS outsourcing with many interorganizational partners in a large Scandinavian high-tech organ......  Outsourcing is now a feasible mean for Enterprise Information Systems (EIS) cost savings, but do however increase the complexity substantially when many organizations are involved. We set out to study EIS outsourcing with many interorganizational partners in a large Scandinavian high...... the rational cost saving explanation; but then with a more careful analysis focusing on institutional factors, other explanations "behind the curtain" were revealed, such as management consultants with a "best practice" agenda, people promoting outsourcing thereby being promoted themselves, and outside...

  6. Enterprise Architecture beyond the Enterprise:Extended Enterprise Architecture Revisited

    OpenAIRE

    Tambo, Torben

    2017-01-01

    As the most enterprises are relying on relations to other enterprises, it is relevant to consider enterprise architecture for inter-organisational relations particularly those relations involving technology. This has been conceptualised as Extended Enterprise Architecture, and a systematic review of this discipline is the topic of this paper. This paper is taking a point of departure in general theories of business-to-business relationships along with inter-organisational information systems,...

  7. Enterprise Computing

    OpenAIRE

    Spruth, Wilhelm G.

    2013-01-01

    Das vorliegende Buch entstand aus einer zweisemestrigen Vorlesung „Enterprise Computing“, die wir gemeinsam über viele Jahre als Teil des Bachelor- oder Master-Studienganges an der Universität Leipzig gehalten haben. Das Buch führt ein in die Welt des Mainframe und soll dem Leser einen einführenden Überblick geben. Band 1 ist der Einführung in z/OS gewidmet, während sich Band 2 mit der Internet Integration beschäftigt. Ergänzend werden in Band 3 praktische Übungen unter z/OS dargestellt....

  8. Fishing Facts Unlimited. Enterprise: Man & Technology.

    Science.gov (United States)

    Southern Illinois Univ., Carbondale. Dept. of Technical and Industrial Education.

    Fishing Facts Unlimited, a student conducted enterprise in Technical and Industrial Education at Southern Illinois University, Carbondale has been a very successful operation, both financially and in providing a community service. The service provided by the enterprise was the production and sales of a 48-page fishing guide to Southern Illinois.…

  9. Manufacturing Enterprise in Asia | IDRC - International Development ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2012-08-23

    Aug 23, 2012 ... ... of the distribution of enterprises by size across Asia, including India, Japan, ... enterprise development and its overall impact on the economy. ... His main areas of research interest are industry, poverty, labour, and employment, ... In partnership with UNESCO's Organization for Women in Science for the ...

  10. Scenario Approach to the Planning of the Production Activities of the Enterprise with a Discrete Type of Production (for Example, Electrical Engineering Industry

    Directory of Open Access Journals (Sweden)

    Krylova E.V.

    2017-12-01

    Full Text Available In conditions of global economic instability the success of electromechanical enterprises depends on their ability to react quickly to challenges of external environment. In order to create background and conditions for this ability the given enterprises refer to manufacturing activity planning, using a probabilistic approach based on forecasts that may not be true. The question of provision of more complete consideration of various internal and external factors and acceleration of decision making process and reaction to changing business environment arises before the organizations that concern more effective scheduling policy. International practice of solving such problems generally leads to qualitative discussion, whereas quantitative assessment of impact of control parameters of enterprise is not practically used, because there is no one systematic approach to manufacturing activity planning. On the basis of studying of international practices methodical guidelines of scenario approach to manufacturing activity planning with mathematical modeling of economics of producer price on electromechanical enterprises have been developed, which reasonably could be used with reference to and interaction with enterprise manufacturing program. The described approach allows solving planning problems iteratively in real-time mode concerning profit maximization, to form producer prices, to divide overhead costs according to the type of products and carry out cost accounting according to the type of a product, and it will provide functional interaction between factors and performance indicators.

  11. THE RESTRUCTURING AS STRATEGIC INSTRUMENT IN MANAGEMENT INDUSTRIAL ENTERPRISE RISK (ON EXAMPLE OF THE MACHINE-BUILDING ASSOCIATION «TRUD PLANT»

    Directory of Open Access Journals (Sweden)

    Vyzhitovich A. M.

    2015-06-01

    Full Text Available The Article is dedicated to questions of the analysis of the processes restructuring enterprise of machine building. The Presented problems to activity enterprise machine building. Studied the innovative experience of restructuring of one of the leading enterprises - «Machine-building “Trud Plant”» JSC. Restructuring is considered in the study as an important tool in risk management loss of competitiveness and financial stability. Possibility of refining the solution of actual problems of defining approaches to identify the main potential risks and threats to businesses that use restructuring to create a long-term competitive advantage in modern conditions. As the main tools for exploring the internal and external environment of the company proposed a method of SWOT-analysis, a method of grouping projects depending on the location of customers products based on publicly available sources of information. The research led to a number of conclusions: proposed methods help to identify key risks and threats, competitive advantage, the ability of enterprises in the light of the results of past and planned restructuring; study and synthesis of work experience of enterprises with the use of these methods generates suggestions on directions of the State support measures; restructuring strategy of risk management as a tool to retain relevance in the context of import substitution.

  12. Business Benefits from Enterprise Systems Implementation in Small and Medium-sized Enterprises

    Directory of Open Access Journals (Sweden)

    Sanjay Mathrani

    2009-08-01

    Full Text Available The market for enterprise systems (ESs continues to grow as business becomes increasingly global and competitive. Increasingly, the market focus for ES vendors is on small businesses. The purpose of this study is to provide a unique ES vendor/consultant perspective on (a the business benefits small and medium-sized enterprises (SMEs expect from their ES investment and (b to examine current practices of ES implementation in SMEs through a conceptual framework that considers the organisational, process and strategic context of the implementation. This study does so with interview data collected from ES vendors, ES consultants and IT research firms, who are the key players in the New Zealand ES industry. A distinctive contribution of this research is the vendor/consultant perspective as the unit of analysis, rather than the SME perspective commonly used in similar research. The vendor/consultant perspective offers a comprehensive viewpoint that extends across numerous SMEs in a variety of industries. Findings from interviews with these professionals indicate that although many ES implementations are several years old now, SMEs have only recently started tracking benefits through analytical processes in expectation to realise business value from their ES investment. The results also identify how ES implementation practices are adapting to be more suitable to the SME sector, an important market for ES vendors given the saturation of the large enterprise market for ES implementation.

  13. Co-operation between Large Enterprises (LE’s and SME’s: an Approach to Overcome the Stage Internationalization Process

    Directory of Open Access Journals (Sweden)

    Eurico Brilhante Dias

    2014-12-01

    Full Text Available Many companies are using their networks in order to overcome psychic distance – liability of foreignness – and liability of outsidership; and networks at domestic markets can be a base in which SMEs can find a lever to get a rapid internationalization process. Regarding this topic has been developed a case study in the Polish market, where a local retailer (“Biedronka” owned by a Portuguese group (“Jerónimo Martins” is offering Portuguese products. In order to apply a constructivist methodology, using the case study method, five SMEs where selected in order to understand if co-operation between these companies and a LE (Large Enterprise would be a way in order to overcome the liability of foreignness and the liability of outsidership. It was also our purpose the understanding of which are the main issues that promote insidership and also the promotion of a rapid internationalization. Our conclusions have shown a LE as a source of institutional and market-specific knowledge, and regarding this last type of knowledge, as source of opportunities, and also how a SME with internationalization knowledge, an international focus and adaptation skills (in order to adapt products and prices can introduce in a co-operative international venture, in far psychic markets, the ingredients needed to get a successful and rapid entry in a foreign market. Trust as a resource, accumulated during lasting relationships in the domestic market, has been shown as a basic requirement to develop these co-operative approaches in international markets.

  14. Enterprise Social Networks

    DEFF Research Database (Denmark)

    Winkler, Till J.; Trier, Matthias

    2017-01-01

    Enterprise Social Networks (ESNs), d. h. Informationssysteme, die die Vernetzung von Mitarbeitern in Unternehmen fördern sollen, sind in verschiedenen Varianten und unter verschiedenen Bezeichnungen (etwa Enterprise Social Media, Corporate Social Software, Social Business oder Enterprise 2...

  15. The enterprise engineering domain

    CSIR Research Space (South Africa)

    De Vries, M

    2015-06-01

    Full Text Available Enterprise engineering (EE) is emerging as a new discipline to address the design of the enterprise in a holistic way. Although existing knowledge on enterprise design is dispersed and fragmented across different disciplines and approaches, previous...

  16. Sustainable Enterprise Excellence

    DEFF Research Database (Denmark)

    Edgeman, Rick; Williams, Joseph; Eskildsen, Jacob Kjær

    , supply chain, customer-related, human capital, financial, marketplace, societal, and environmental performance. Sustainable Enterprise Excellence integrates ethical, efficient and effective (E3) enterprise governance with 3E (equity, ecology, economy) Triple Top Line strategy throughout enterprise...

  17. Assessment of clean development mechanism potential of large-scale energy efficiency measures in heavy industries

    International Nuclear Information System (INIS)

    Hayashi, Daisuke; Krey, Matthias

    2007-01-01

    This paper assesses clean development mechanism (CDM) potential of large-scale energy efficiency measures in selected heavy industries (iron and steel, cement, aluminium, pulp and paper, and ammonia) taking India and Brazil as examples of CDM project host countries. We have chosen two criteria for identification of the CDM potential of each energy efficiency measure: (i) emission reductions volume (in CO 2 e) that can be expected from the measure and (ii) likelihood of the measure passing the additionality test of the CDM Executive Board (EB) when submitted as a proposed CDM project activity. The paper shows that the CDM potential of large-scale energy efficiency measures strongly depends on the project-specific and country-specific context. In particular, technologies for the iron and steel industry (coke dry quenching (CDQ), top pressure recovery turbine (TRT), and basic oxygen furnace (BOF) gas recovery), the aluminium industry (point feeder prebake (PFPB) smelter), and the pulp and paper industry (continuous digester technology) offer promising CDM potential

  18. Giga-Investments: Modelling the Valuation of Very Large Industrial Real Investments

    OpenAIRE

    Collan, Mikael

    2004-01-01

    In this doctoral dissertation characteristics of very large industrial real investments (VLIRI) are investigated and a special group of VLIRI is defined as giga-investments. The investment decision-making regarding to giga-investments is discussed from the points of view of discounted cash-flow based methods and real option valuation. Based on the bacground of establishing giga-investments, state-of-the-art in capital budgeting (including real options) and by applying fuzzy numbers a novel me...

  19. [Reflection on developing bio-energy industry of large oil company].

    Science.gov (United States)

    Sun, Haiyang; Su, Haijia; Tan, Tianwei; Liu, Shumin; Wang, Hui

    2013-03-01

    China's energy supply becomes more serious nowadays and the development of bio-energy becomes a major trend. Large oil companies have superb technology, rich experience and outstanding talent, as well as better sales channels for energy products, which can make full use of their own advantages to achieve the efficient complementary of exist energy and bio-energy. Therefore, large oil companies have the advantages of developing bio-energy. Bio-energy development in China is in the initial stage. There exist some problems such as available land, raw material supply, conversion technologies and policy guarantee, which restrict bio-energy from industrialized development. According to the above key issues, this article proposes suggestions and methods, such as planting energy plant in the marginal barren land to guarantee the supply of bio-energy raw materials, cultivation of professional personnel, building market for bio-energy counting on large oil companies' rich experience and market resources about oil industry, etc, aimed to speed up the industrialized process of bio-energy development in China.

  20. Chinese Enterprises' Overseas M&A Spree

    Institute of Scientific and Technical Information of China (English)

    State-owned Enterprise Magazine

    2010-01-01

    @@ Merger and acquisition is the most important move and shortest cut in an enterprise's growth strategy to expand itself. George Stigler, a famous American economist, once said that there was not a large American enterprise that did not grow up through merger and acquisition to some extent in some way, and almost no large companies grew up by internal accumulation.

  1. Information technology in enterprise management through the concept

    OpenAIRE

    Козликина, Ю. А.

    2016-01-01

    Consider the concept of Industry 4.0 in industrial plants. Why is it necessary to the functioning of a modern enterprise? It was identified features of the implementation of the concept 4.0. The influence of a new industrial revolution in the enterprise.

  2. To work in a medium-size enterprise in the nuclear sector

    International Nuclear Information System (INIS)

    Le Ngoc, B.

    2017-01-01

    The French nuclear industry is made up of 2500 enterprises of any size from family businesses to large groups via medium-sized enterprises and start-ups. Most small and medium-sized enterprises have difficulties to recruit qualified people whereas their order books are full. These difficulties originate from the fact that these enterprises are less known than EDF, AREVA and CEA and as a consequence less chosen by job applicants. There is another point, the image of the industry has progressively deteriorated and the idea of working in an industrial sector is no more very exciting. The last point is that nuclear industry's future may appear less clear because of the government's policy of reducing the nuclear share in power production through the early decommissioning of reactors. 3 medium-size enterprises of the nuclear sector: Assystem, REEL and Onet Technologies consider to recruit a total of about 800 people per year and give 4 reasons to join a medium-sized company: 1) a faster professional career, more diverse activities in the job, closer managing executives and a dynamic and stimulating workplace. (A.C.)

  3. Small and Medium Enterprises and Biopharmaceutical Innovations ...

    African Journals Online (AJOL)

    Erah

    Benin City, 300001 Nigeria. All rights ... are challenges facing African Small and Medium Enterprises (SMEs) in biopharmaceutical industry, the ... Network for Drug and Diagnostics recognizes .... functionality is in place, integration into the.

  4. Collective Beer Brand Identity: A Semiotic Analysis of the Websites Representing Small and Medium Enterprises in the Brewing Industry of Western PA

    Science.gov (United States)

    Cincotta, Dominic

    2014-01-01

    This research studies how brand identities, individually and communally, as read through websites are created among small and medium-sized enterprise breweries in western Pennsylvania. Content analysis through the frame of Kress and van Leeuwen was used as the basis for the codebook that reads each brand identity for the researcher. The…

  5. Value Co-creation in the Cloud : Understanding Software-as-a-Service-Driven Convergence of the Enterprise Systems and Financial Services Industries

    NARCIS (Netherlands)

    Teracino, Elizabeth Anne

    2017-01-01

    Enterprise systemen worden meer en meer gehost in de cloud en aangeboden als een dienst, volgens het zogenaamde software-als-een-dienst (Software-as-a-Service, of afgekort, SaaS) business model. Ook financiële dienstverleners zijn SaaS aan het invoeren en passen hierdoor de wijze waarop zij hun

  6. Methodological Aspects of Strategic Development of Regional Socio-Economic System (Following the Example of Radio-Electronic Industry Enterprises in the Republic of Tatarstan)

    Science.gov (United States)

    Uraev, Nikolay N.; Mingaleev, Gaziz F.; Kushimov, Aleksandr T.; Kolesov, Nikolay A.

    2016-01-01

    This paper considers the methodological aspects of forming a development strategy for the regional socioeconomic system (by the example of radio-electronic enterprises in the Republic of Tatarstan). The paper suggests a conceptual scheme of the macro- and micro-factors' influence on the regional socioeconomic system. This scheme is based on the…

  7. Is Enterprise Education Relevant to Social Enterprise?

    Science.gov (United States)

    Bridge, Simon

    2015-01-01

    Purpose: Both enterprise education and social enterprise have become fashionable but what, if any, should be the connections between them? The purpose of this paper is to explore those connections and to reflect on what relevance the two concepts might have for each other. Design/methodology/approach: Both enterprise education and social…

  8. The Pricing Strategy and Welfare Analysis of Enterprise Cooperation on Mobile Internet Industry Chain%移动互联网产业链上企业合作的定价策略及福利变化

    Institute of Scientific and Technical Information of China (English)

    田永晓

    2017-01-01

    传统互联网企业面临着公司市值快速萎缩、移动设备制造商传统渠道销售量急剧下跌等困境,应发展趋势而生的"互联网+"商业模式是产业崭新的竞争制高点,传统互联网企业与移动设备制造商通过平台增长形成新的商业生态系统.基于双边市场理论,分析在单一垄断互联网企业情形下互联网企业与移动设备制造商采取纵向一体化、纵向分离策略的定价行为;探讨在双寡头互联网企业情形下互联网企业与移动设备制造商同时采取纵向一体化、纵向分离以及分别采取差异化策略的定价行为.结果表明,互联网企业与移动设备制造商进行合作可以有效解决交叉网络外部性"内生化"的问题,有利于扩大互联网企业和移动设备制造商的市场份额,加强双方在移动互联网产业链中的竞争力.%Traditional internet enterprises have the problems of rapidly declined market value and the mobile devices merchants have lost the sales volume in the traditional channel,while the "Internet Plus" strategy can be the new competition high ground of the industry.Through the growth of the platform,it can form a business ecosystem between traditional internet enterprise and mobile device manufacturers.Based on the two-sided market theory,we analyze the pricing strategy of internet enterprises and mobile device manufacturers in the perspective of vertical disintegration and vertical integration of single monopoly internet enterprise,as well as duopolyinternet enterprises.We further analyzed the situations of vertical integration,vertical disintegration and differentiated pricing strategies on duopoly internet enterprises.Then the results show that the cooperation between traditional internet enterprises and mobile devices merchants can effectively solve the problem of endogenous externalization in crossing network,it is helpful to extend the market share of internet enterprises and mobile device

  9. Industrial Performance of the Renewable Resources Industry in China

    OpenAIRE

    Dong Zhou; Xingang Zhao

    2015-01-01

    Promoting the development of renewable resources industry is an effective way to solve the problems of resources shortage and environmental pollution in China. In this paper, studies have found that “market structure” and “ownership structure”, namely “double structure”, is an important explanatory variable that affects industrial performance according to the “structure-conduct-performance” paradigm. Literature reviews have shown that large state-owned enterprises are playing an important rol...

  10. The use of industrial type control and monitoring components for a large fusion experiment

    International Nuclear Information System (INIS)

    Hemming, O.N.; Manduchi, G.; Luchetta, A.; Schmidt, V.; Vitturi, S.

    1994-01-01

    RFX is one of the large nuclear fusion experiments within the framework of the co-ordinated nuclear fusion research programme of the European Community. During the control system design phase in 1986, the increase in power and flexibility of industrial type programmable controllers lead to the decision for a complete physical split of control, monitoring and data acquisition functions according to speed requirements, allowing the exploitation of the relative advantages of both CAMAC and programmable controllers. The 'slow' control and monitoring functions (for about 4000 digital and 200 analog I/O signals with scanning times of similar 1 second) have been implemented using a series of networked industrial PLCs and personal computers. This has allowed us to choose from a wide range of off-the-shelf hardware and software components for the plant interface and to utilize specialized expertise from the industrial field for the application software implementation. The paper gives the expectations and results gained from this design choice and how it has influenced the decisions for the evolution of the system over the next few years with the utilization of new industrial hardware components. Details are also given regarding the system integration (via the Ethernet network) with the VAX-based CAMAC frontend fast control and data-acquisition system. ((orig.))

  11. Market profile and conservation opportunity assessment for large industrial operations in Ontario

    International Nuclear Information System (INIS)

    Keyes, C.; Balbaa, I.; Cuthbert, D.; Young, D.

    2006-01-01

    In view of the expected electricity shortages in Ontario, there is an urgent need for not only new supply but also a significant increase in conservation and load shifting efforts. This report presented the results of a study focused on key technology or market areas that presented opportunities for implementation of energy efficient measures. The materials, analytical results, and outcomes of the study could be utilized as a framework for developing future program delivery models. The report provided a comprehensive market analysis for large industrial operations in Ontario. A market profile was presented for the following sectors: mining; pulp and paper; iron and steel; the chemical industry; petroleum refining; motor vehicle, body and parts manufacturing; cement; and food. Opportunities for conservation and demand management were identified. The report also presented an analysis and recommendations for energy conservation demand management and demand response applicable to large industry. Examples of programs in other jurisdictions in Canada as well as the United States were discussed. 34 refs., 7 tabs., 23 figs., 1 appendix.

  12. Saving Energy in Industrial Companies: Case Studies of Energy Efficiency Programs in Large U.S. Industrial Corporations and the Role of Ratepayer-Funded Support

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2017-03-08

    This paper is designed for companies looking to cut costs through energy savings, ratepayer-funded program administrators interested in increasing large industrial company participation in energy efficiency program offerings, and state utility commissions.

  13. Industrial Technology for Unprecented Energy and Luminosity The Large Hadron Collider

    CERN Document Server

    Lebrun, P

    2004-01-01

    With over 3 billion Swiss francs procurement contracts under execution in industry and the installation of major technical systems in its first 3.3 km sector, the Large Hadron Collider (LHC) construction is now in full swing at CERN, the European Organization for Nuclear Research. The LHC is not only the most challenging particle accelerator, it is also the largest global project ever for a scientific instrument based on advanced technology. Starting from accelerator performance requirements, we recall how these can be met by an appropriate combination of technologies, such as high-field superconducting magnets, superfluid helium cryogenics, power electronics, with particular emphasis on developments required to meet demanding specifications, and industrialization issues which had to be solved for achieving series production of precision components under tight quality assurance and within limited resources. This provides the opportunity for reviewing the production status of the main systems and the progress ...

  14. Enterprise Pattern: integrating the business process into a unified enterprise model of modern service company

    Science.gov (United States)

    Li, Ying; Luo, Zhiling; Yin, Jianwei; Xu, Lida; Yin, Yuyu; Wu, Zhaohui

    2017-01-01

    Modern service company (MSC), the enterprise involving special domains, such as the financial industry, information service industry and technology development industry, depends heavily on information technology. Modelling of such enterprise has attracted much research attention because it promises to help enterprise managers to analyse basic business strategies (e.g. the pricing strategy) and even optimise the business process (BP) to gain benefits. While the existing models proposed by economists cover the economic elements, they fail to address the basic BP and its relationship with the economic characteristics. Those proposed in computer science regardless of achieving great success in BP modelling perform poorly in supporting the economic analysis. Therefore, the existing approaches fail to satisfy the requirement of enterprise modelling for MSC, which demands simultaneous consideration of both economic analysing and business processing. In this article, we provide a unified enterprise modelling approach named Enterprise Pattern (EP) which bridges the gap between the BP model and the enterprise economic model of MSC. Proposing a language named Enterprise Pattern Description Language (EPDL) covering all the basic language elements of EP, we formulate the language syntaxes and two basic extraction rules assisting economic analysis. Furthermore, we extend Business Process Model and Notation (BPMN) to support EPDL, named BPMN for Enterprise Pattern (BPMN4EP). The example of mobile application platform is studied in detail for a better understanding of EPDL.

  15. AN INVESTIGATION INTO MEDIUM-SIZED MULTINATIONAL ENTERPRISES

    Directory of Open Access Journals (Sweden)

    Daniele Schilirò

    2013-09-01

    Full Text Available The paper provides an investigation of medium-sized Italian industrial enterprises that have become multinational companies. It concetrates on the set of medium and medium-large enterprises who seem to grow more in foreign markets, either through exports or through foreign direct investment. The work also offers a descriptive empirical picture of the performance of medium-sized Italian multinationals, which is compared with the performance of large corporations. From this analysis, which is based on several data sources, it is possible to outline a profile regarding the medium-size italian multinational enterprises; the aim is to understand the complex strategy towards internationalization of these companies, where the dimension of production is important and, therefore, innovation has a key role. Also the commercial dimension is crucial, because it leads to point to the direct supervision of foreign markets and to look very carefully at the customers, offering them a wide range of services. Finally, the paper highlights some critical issues that the medium sized multinational enterprises have to face for competing: namely, the stagnant productivity, the high taxation, the insufficient institutional support for internationalization, the bureaucracy and its high costs, the lack of skilled human capital available in the labor market due to inadequate policy training.

  16. Decision-making in multinational enterprises: concepts and research approaches.

    OpenAIRE

    Ghertman M

    1984-01-01

    ILO pub. Working paper on decision making processes in multinational enterprises - gives definition, type and classification of decision making in large enterprises; outlines the centralization decentralization theory and the iterative process; notes research needs. Bibliography.

  17. Construction of Industrial Ecosystem of an Electric Company under Ecological Perspective

    Science.gov (United States)

    Li, Xin; Zhang, Yuan; Wu, Han

    2018-01-01

    Be confronted with more and more fierce competition environment, only by constantly integrating, constructing and restructuring internal and external resources as well as capabilities can enterprises adapt themselves to the rapidly changing environment and maintain the advantages of sustained competition. Business competition has changed from product competition of single enterprise to competition of bussiness ecosystem. Therefore, how to build a business system is the key to win competition. This paper draws lessons from business ecosystem and industrial ecosystem concept and takes the subordinate industry company of a large enterprise as the research object. On the the basis of combing its characteristics and organizational structure, an industrial ecosystem is tired to constructed.

  18. Internal quality evolution of a large test system – an industrial study

    Directory of Open Access Journals (Sweden)

    Kovács Attila

    2016-12-01

    Full Text Available This paper presents our empirical observations related to the evolution of a large automated test system. The system observed is used in the industry as a test tool for complex telecommunication systems, itself consisting of more than one million lines of source code. This study evaluates how different changes during the development have changed the number of observed Code Smells in the test system. We have monitored the development of the test scripts and measured the code quality characteristics over a five years period.

  19. ERP (enterprise resource planning) systems can streamline healthcare business functions.

    Science.gov (United States)

    Jenkins, E K; Christenson, E

    2001-05-01

    Enterprise resource planning (ERP) software applications are designed to facilitate the systemwide integration of complex processes and functions across a large enterprise consisting of many internal and external constituents. Although most currently available ERP applications generally are tailored to the needs of the manufacturing industry, many large healthcare systems are investigating these applications. Due to the significant differences between manufacturing and patient care, ERP-based systems do not easily translate to the healthcare setting. In particular, the lack of clinical standardization impedes the use of ERP systems for clinical integration. Nonetheless, an ERP-based system can help a healthcare organization integrate many functions, including patient scheduling, human resources management, workload forecasting, and management of workflow, that are not directly dependent on clinical decision making.

  20. Enterprise size and risk of hospital treated injuries among manual construction workers in Denmark: a study protocol

    Science.gov (United States)

    2011-01-01

    Background In most countries throughout the world the construction industry continues to account for a disturbingly high proportion of fatal and nonfatal injuries. Research has shown that large enterprises seem to be most actively working for a safe working environment when compared to small and medium-sized enterprises. Also, statistics from Canada, Italy and South Korea suggest that the risk of injury among construction workers decreases with enterprise size, that is the smaller the enterprise the greater the risk of injury. This trend, however, is neither confirmed by the official statistics from Eurostat valid for EU-15 + Norway nor by a separate Danish study - although these findings might have missed a trend due to severe underreporting. In addition, none of the above mentioned studies controlled for the occupational distribution within the enterprises. A part of the declining injury rates observed in Canada, Italy and South Korea therefore might be explained by an increasing proportion of white-collar employees in large enterprises. Objective To investigate the relation between enterprise size and injury rates in the Danish construction industry. Methods/Design All male construction workers in Denmark aged 20-59 years will be followed yearly through national registers from 1999 to 2006 for first hospital treated injury (ICD-10: S00-T98) and linked to data about employment status, occupation and enterprise size. Enterprise size-classes are based on the Danish business pattern where micro (less than 5 employees), small (5-9 employees) and medium-sized (10-19 employees) enterprises will be compared to large enterprises (at least 20 employees). The analyses will be controlled for age (five-year age groups), calendar year (as categorical variable) and occupation. A multi-level Poisson regression will be used where the enterprises will be treated as the subjects while observations within the enterprises will be treated as correlated repeated measurements

  1. Enterprise size and risk of hospital treated injuries among manual construction workers in Denmark: a study protocol

    Directory of Open Access Journals (Sweden)

    Christensen Ulla

    2011-04-01

    Full Text Available Abstract Background In most countries throughout the world the construction industry continues to account for a disturbingly high proportion of fatal and nonfatal injuries. Research has shown that large enterprises seem to be most actively working for a safe working environment when compared to small and medium-sized enterprises. Also, statistics from Canada, Italy and South Korea suggest that the risk of injury among construction workers decreases with enterprise size, that is the smaller the enterprise the greater the risk of injury. This trend, however, is neither confirmed by the official statistics from Eurostat valid for EU-15 + Norway nor by a separate Danish study - although these findings might have missed a trend due to severe underreporting. In addition, none of the above mentioned studies controlled for the occupational distribution within the enterprises. A part of the declining injury rates observed in Canada, Italy and South Korea therefore might be explained by an increasing proportion of white-collar employees in large enterprises. Objective To investigate the relation between enterprise size and injury rates in the Danish construction industry. Methods/Design All male construction workers in Denmark aged 20-59 years will be followed yearly through national registers from 1999 to 2006 for first hospital treated injury (ICD-10: S00-T98 and linked to data about employment status, occupation and enterprise size. Enterprise size-classes are based on the Danish business pattern where micro (less than 5 employees, small (5-9 employees and medium-sized (10-19 employees enterprises will be compared to large enterprises (at least 20 employees. The analyses will be controlled for age (five-year age groups, calendar year (as categorical variable and occupation. A multi-level Poisson regression will be used where the enterprises will be treated as the subjects while observations within the enterprises will be treated as correlated repeated

  2. Enterprise size and risk of hospital treated injuries among manual construction workers in Denmark: a study protocol.

    Science.gov (United States)

    Pedersen, Betina H; Hannerz, Harald; Christensen, Ulla; Tüchsen, Finn

    2011-04-21

    In most countries throughout the world the construction industry continues to account for a disturbingly high proportion of fatal and nonfatal injuries. Research has shown that large enterprises seem to be most actively working for a safe working environment when compared to small and medium-sized enterprises. Also, statistics from Canada, Italy and South Korea suggest that the risk of injury among construction workers decreases with enterprise size, that is the smaller the enterprise the greater the risk of injury. This trend, however, is neither confirmed by the official statistics from Eurostat valid for EU-15 + Norway nor by a separate Danish study - although these findings might have missed a trend due to severe underreporting. In addition, none of the above mentioned studies controlled for the occupational distribution within the enterprises. A part of the declining injury rates observed in Canada, Italy and South Korea therefore might be explained by an increasing proportion of white-collar employees in large enterprises. To investigate the relation between enterprise size and injury rates in the Danish construction industry. All male construction workers in Denmark aged 20-59 years will be followed yearly through national registers from 1999 to 2006 for first hospital treated injury (ICD-10: S00-T98) and linked to data about employment status, occupation and enterprise size. Enterprise size-classes are based on the Danish business pattern where micro (less than 5 employees), small (5-9 employees) and medium-sized (10-19 employees) enterprises will be compared to large enterprises (at least 20 employees). The analyses will be controlled for age (five-year age groups), calendar year (as categorical variable) and occupation. A multi-level Poisson regression will be used where the enterprises will be treated as the subjects while observations within the enterprises will be treated as correlated repeated measurements. This follow-up study uses register data that

  3. Large eddy simulation of flows in industrial compressors: a path from 2015 to 2035

    Science.gov (United States)

    Gourdain, N.; Sicot, F.; Duchaine, F.; Gicquel, L.

    2014-01-01

    A better understanding of turbulent unsteady flows is a necessary step towards a breakthrough in the design of modern compressors. Owing to high Reynolds numbers and very complex geometry, the flow that develops in such industrial machines is extremely hard to predict. At this time, the most popular method to simulate these flows is still based on a Reynolds-averaged Navier–Stokes approach. However, there is some evidence that this formalism is not accurate for these components, especially when a description of time-dependent turbulent flows is desired. With the increase in computing power, large eddy simulation (LES) emerges as a promising technique to improve both knowledge of complex physics and reliability of flow solver predictions. The objective of the paper is thus to give an overview of the current status of LES for industrial compressor flows as well as to propose future research axes regarding the use of LES for compressor design. While the use of wall-resolved LES for industrial multistage compressors at realistic Reynolds number should not be ready before 2035, some possibilities exist to reduce the cost of LES, such as wall modelling and the adaptation of the phase-lag condition. This paper also points out the necessity to combine LES to techniques able to tackle complex geometries. Indeed LES alone, i.e. without prior knowledge of such flows for grid construction or the prohibitive yet ideal use of fully homogeneous meshes to predict compressor flows, is quite limited today. PMID:25024422

  4. Innovativeness of enterprises in Poland

    Directory of Open Access Journals (Sweden)

    Katarzyna Sieradzka

    2013-01-01

    Full Text Available At a time of huge economic challenges, innovativeness is perceived as a way of overcoming difficulties, fostering and assuring socio-economic growth of particular countries. It is necessary to improve competitive standing of enterprises both in domestic and international economies. Launching of new or improved products, application of state of the art technologies and of new organisational and management solutions are key to enhanced effectiveness and better competitiveness of enterprises. Innovation standards of Polish enterprises are considerably lower than those of businesses operating in countries of the old European Union, therefore so much attention is paid to these issues.This paper undertakes to analyse innovative activities of enterprises in the Polish economy.Based on the report ‘Innovation Union Scoreboard’, a comparative analysis of Poland’s innovation standards in relation to other member states of the European Union is conducted, levels and structure of financial spending on innovative activities incurred by Polish industrial enterprises are discussed using statistics published by the National Office for Statistics and Ministry of Economy.

  5. Control of enterprise interfaces for supply chain enterprise modeling

    Energy Technology Data Exchange (ETDEWEB)

    Interrante, L.D. [Sandia National Labs., Albuquerque, NM (United States); Macfarlane, J.F. [Lawrence Berkeley Lab., CA (United States). Information and Computing Sciences Div.

    1995-04-01

    There is a current trend for manufacturing enterprises in a supply chain of a particular industry to join forces in an attempt to promote efficiencies and improve competitive position. Such alliances occur in the context of specific legal and business agreements such that each enterprise retains a majority of its business and manufacturing information as private and shares other information with its trading partners. Shared information may include enterprise demand projections, capacities, finished goods inventories, and aggregate production schedules. Evidence of the trend toward information sharing includes the recent emphases on vendor-managed inventories, quick response, and Electronic Data Interchange (EDI) standards. The increased competition brought on by the global marketplace is driving industries to consider the advantages of trading partner agreements. Aggregate-level forecasts, supply-chain production smoothing, and aggregate-level inventory policies can reduce holding costs, record-keeping overhead, and lead time in product development. The goal of this research is to orchestrate information exchange among trading partners to allow for aggregate-level analysis to enhance supply chain efficiency. The notion of Enterprise Interface Control (EIC) is introduced as a means of accomplishing this end.

  6. Large eddy simulations of isothermal confined swirling flow in an industrial gas-turbine

    International Nuclear Information System (INIS)

    Bulat, G.; Jones, W.P.; Navarro-Martinez, S.

    2015-01-01

    Highlights: • We conduct a large eddy simulation of an industrial gas turbine. • The results are compared with measurements obtained under isothermal conditions. • The method reproduces the observed precessing vortex and central vortex cores. • The profiles of mean and rms velocities are found to be captured to a good accuracy. - Abstract: The paper describes the results of a computational study of the strongly swirling isothermal flow in the combustion chamber of an industrial gas turbine. The flow field characteristics are computed using large eddy simulation in conjunction with a dynamic version of the Smagorinsky model for the sub-grid-scale stresses. Grid refinement studies demonstrate that the results are essentially grid independent. The LES results are compared with an extensive set of measurements and the agreement with these is overall good. The method is shown to be capable of reproducing the observed precessing vortex and central vortex cores and the profiles of mean and rms velocities are found to be captured to a good accuracy. The overall flow structure is shown to be virtually independent of Reynolds number

  7. The large-scale process of microbial carbonate precipitation for nickel remediation from an industrial soil.

    Science.gov (United States)

    Zhu, Xuejiao; Li, Weila; Zhan, Lu; Huang, Minsheng; Zhang, Qiuzhuo; Achal, Varenyam

    2016-12-01

    Microbial carbonate precipitation is known as an efficient process for the remediation of heavy metals from contaminated soils. In the present study, a urease positive bacterial isolate, identified as Bacillus cereus NS4 through 16S rDNA sequencing, was utilized on a large scale to remove nickel from industrial soil contaminated by the battery industry. The soil was highly contaminated with an initial total nickel concentration of approximately 900 mg kg -1 . The soluble-exchangeable fraction was reduced to 38 mg kg -1 after treatment. The primary objective of metal stabilization was achieved by reducing the bioavailability through immobilizing the nickel in the urease-driven carbonate precipitation. The nickel removal in the soils contributed to the transformation of nickel from mobile species into stable biominerals identified as calcite, vaterite, aragonite and nickelous carbonate when analyzed under XRD. It was proven that during precipitation of calcite, Ni 2+ with an ion radius close to Ca 2+ was incorporated into the CaCO 3 crystal. The biominerals were also characterized by using SEM-EDS to observe the crystal shape and Raman-FTIR spectroscopy to predict responsible bonding during bioremediation with respect to Ni immobilization. The electronic structure and chemical-state information of the detected elements during MICP bioremediation process was studied by XPS. This is the first study in which microbial carbonate precipitation was used for the large-scale remediation of metal-contaminated industrial soil. Copyright © 2016 Elsevier Ltd. All rights reserved.

  8. Enterprise Mac Administrator's Guide

    CERN Document Server

    Edge, Charles; Hunter, Beau

    2009-01-01

    Charles Edge, Zack Smith, and Beau Hunter provide detailed explanations of the technology required for large-scale Mac OS X deployments and show you how to integrate it with other operating systems and applications. Enterprise Mac Administrator's Guide addresses the growing size and spread of Mac OS X deployments in corporations and institutions worldwide. In some cases, this is due to the growth of traditional Mac environments, but for the most part it has to do with "switcher" campaigns, where Windows and/or Linux environments are migrating to Mac OS X. However, there is a steep cu

  9. Safety Regulations in organizations and enterprises under supervision of Federal environmental, industrial and nuclear supervision service of Russia (Rostechnadzor), Central Region. Short overview of sites which potentially are dangerous for terrorist threat

    International Nuclear Information System (INIS)

    Gasselblat, A.D.

    2010-01-01

    Full text: Federal environmental, industrial and nuclear supervision service of Russia carries out inspections over safety of atomic energy sites on the territory of Russian Federation, which are used for peaceful purposes. Currently under control of Supervision Service on the whole territory of Russia 2000 (2179) (1.) organizations (enterprises), business entities in the field of atomic energy use (industry, medicine, scientific research, agriculture, geological survey, education and etc.) using in their activity radionuclide sources. Approximately 6000 (5955) territorially separated or technologically independent radiation-dangerous sites are counted in their structure, which are dealing with radionuclides. The total number of sealed radionuclide sources is more than 1000 pieces. More than thousands radiation-dangerous entities are dealing with unsealed radionuclide sources and radioactive wastes. At such scales of activity, when evident dynamic of source movement is observed, it is very important for regulatory authority to update information on source location, condition, safe use and security, as well as physical protection and prevention of its use in terrorist purposes. In its structure industrial and nuclear supervision service of Russia has 7 big subdivisions (according to directions regulation in the field of atomic energy use) - inter regional territory administrations on control over nuclear and radiation safety, ensuring control over whole territory of Russian Federation, each in within its border of Federal region of Russian Federation. Central inter regional territory administration on control over nuclear and radiation safety is the biggest according to its personnel and number of controlled sites by territorial subdivision of Federal environmental, industrial and nuclear supervision service of Russia (in the field of atomic energy use, according to Federal Law dated 21.11.1995, №170-Federal Low On atomic energy use) and carries out its activity

  10. Developing countries and incipient industrialization: a case study of ...

    African Journals Online (AJOL)

    Botswana's small and large towns offer good examples of incipient industrialization and enterprise clustering in a developing economy. Using data from Lobatse, a small industrial centre in Botswana, this brief paper shows that clustering in developing countries does not necessarily induce high inter-firm relationships as is ...

  11. The Modern Marketing Communications of Hotel Enterprises

    Directory of Open Access Journals (Sweden)

    Vlashchenko Nataliia M.

    2017-06-01

    Full Text Available The article is aimed at studying the features of marketing communications in the hotel industry and developing scientific-practical recommendations to activate their use at the level of domestic hotel enterprises. A classification of the communications of hotel enterprises, with defining the place for marketing therein, has been compiled. A complex of marketing communications of hotel enterprises has been developed, taking account of the current marketing instrumentarium. Objectives for the staff of hotel enterprises in terms of activities in the social networks have been formulated. Recommendations to activate the development of Internet marketing in the sphere of hospitality have been developed. It has been concluded that the special feature of promoting services of a hotel enterprise is the development of personalized relationships with customers.

  12. Effective Communication Practices during Organizational Transformation: A Benchmarking Study of the U.S. Automobile Industry and U.S. Naval Aviation Enterprise

    Science.gov (United States)

    2007-07-01

    best thing that the Enterprise could do is advertise all the tools that they offer to everyone in order to make them suc- cessful … If you have an...instance, an auto company empow- ered employees to own a “crib” where equipment and supplies were located : “The Crib Champion … a lot of [things] can...exactly the way you want it, and if you want a pair of Nike shoes with your name on them, you can do that.” Understanding young people’s custom

  13. EVOLUTION OF INNOVATION ACTIVITY IN THE CONTEXT OF SIZE OF ENTERPRISES IN WEST POMERANIAN PROVINCE – SYSTEM APPROACH

    Directory of Open Access Journals (Sweden)

    Arkadiusz Świadek

    2015-09-01

    Full Text Available In transitions countries firms’ size and equity property flown on economy processes, including innovation activity in industry. Driven researches show that the key to accelerate economy development is a technology transfer from foreign countries. Implementing of new solutions depends on medium and large organizations, rather than micro and small. Traditional micro and small regional enterprises feature a low level of taking up risks capability. An innovation activity in industry systems grows up during a time flow, but only in a small domestic enterprises, and it’s similar to their foreign and larger competitors. This paper discusses the problems of size and equity own of enterprises for innovation activity in regional industry systems in West Pomeranian province in the period 2004-2006 and 2009-2011.

  14. SYSTEM RISKS OF ENTERPRISES AND TERRITORIES DEVELOPMENT STRATEGY

    Directory of Open Access Journals (Sweden)

    V.S. Bochko

    2007-03-01

    Full Text Available The article deals with the problem of failures in interaction between industrial enterprises and territories. The authors see the reason for that in industrial enterprises taking unnecessary risks. The authors also suggest a new vision for the realization of social responsibility of the businesses via balanced management of system risks.

  15. Management of small and medium size enterprises as a carrier of economic growth

    Directory of Open Access Journals (Sweden)

    Ožegović Lazar

    2012-01-01

    Full Text Available Numerous studies in the world of market economy show that the share of small and medium size enterprises is constantly increasing compared to large enterprises. This does not decrease the significance of large enterprises, but the dependence between them gets larger every day. National economies which manage to find the optimal combination between small, medium size and large enterprises are more successful than the others. Management of small and medium size enterprises (SMEs in conceptual terms is similar to the process of management of large enterprises. An organization must be managed in order to function and this rule applies to small and medium size enterprises.

  16. Research on market power and market structure: A direct measure of market power of internet platform enterprises

    Directory of Open Access Journals (Sweden)

    Baowen Sun

    2017-09-01

    Full Text Available Purpose – This paper aims to clear whether the monopoly structure of the internet industry has produced market power and discussed the welfare change of the internet industry monopoly. Design/methodology/approach – By using new empirical industrial organization methods and taking the e-commerce market as an example, the authors measured market power and economies of scale of the internet platform companies. Findings – Internet platform enterprises have formed scale economy, but it has not had market power, and the industry still maintains high levels of competition; also, the emergence of large enterprises may increase the welfare of consumers. Originality/value – The conclusion of this paper clarified actual competition status of internet industry and provided a new foothold for regulation and ideas for the traditional industry to crack the Marshall Conflict.

  17. Drivers and barriers to e-invoicing adoption in Greek large scale manufacturing industries

    Energy Technology Data Exchange (ETDEWEB)

    Marinagi, Catherine, E-mail: marinagi@teihal.gr, E-mail: ptrivel@yahoo.com, E-mail: preklitis@yahoo.com; Trivellas, Panagiotis, E-mail: marinagi@teihal.gr, E-mail: ptrivel@yahoo.com, E-mail: preklitis@yahoo.com; Reklitis, Panagiotis, E-mail: marinagi@teihal.gr, E-mail: ptrivel@yahoo.com, E-mail: preklitis@yahoo.com [Technological Educational Institute of Sterea Ellada, Department of Logistics management, 1st km of Old National Road Thiva-Elefsis-32200, Thiva (Greece); Skourlas, Christos, E-mail: cskourlas@teiath.gr [Technological Educational Institute of Athens, Department of Informatics, Ag. Spyridonos, Aigaleo-12210, Athens (Greece)

    2015-02-09

    This paper attempts to investigate the drivers and barriers that large-scale Greek manufacturing industries experience in adopting electronic invoices (e-invoices), based on three case studies with organizations having international presence in many countries. The study focuses on the drivers that may affect the increase of the adoption and use of e-invoicing, including the customers demand for e-invoices, and sufficient know-how and adoption of e-invoicing in organizations. In addition, the study reveals important barriers that prevent the expansion of e-invoicing, such as suppliers’ reluctance to implement e-invoicing, and IT infrastructures incompatibilities. Other issues examined by this study include the observed benefits from e-invoicing implementation, and the financial priorities of the organizations assumed to be supported by e-invoicing.

  18. Progress in Root Cause and Fault Propagation Analysis of Large-Scale Industrial Processes

    Directory of Open Access Journals (Sweden)

    Fan Yang

    2012-01-01

    Full Text Available In large-scale industrial processes, a fault can easily propagate between process units due to the interconnections of material and information flows. Thus the problem of fault detection and isolation for these processes is more concerned about the root cause and fault propagation before applying quantitative methods in local models. Process topology and causality, as the key features of the process description, need to be captured from process knowledge and process data. The modelling methods from these two aspects are overviewed in this paper. From process knowledge, structural equation modelling, various causal graphs, rule-based models, and ontological models are summarized. From process data, cross-correlation analysis, Granger causality and its extensions, frequency domain methods, information-theoretical methods, and Bayesian nets are introduced. Based on these models, inference methods are discussed to find root causes and fault propagation paths under abnormal situations. Some future work is proposed in the end.

  19. Drivers and barriers to e-invoicing adoption in Greek large scale manufacturing industries

    International Nuclear Information System (INIS)

    Marinagi, Catherine; Trivellas, Panagiotis; Reklitis, Panagiotis; Skourlas, Christos

    2015-01-01

    This paper attempts to investigate the drivers and barriers that large-scale Greek manufacturing industries experience in adopting electronic invoices (e-invoices), based on three case studies with organizations having international presence in many countries. The study focuses on the drivers that may affect the increase of the adoption and use of e-invoicing, including the customers demand for e-invoices, and sufficient know-how and adoption of e-invoicing in organizations. In addition, the study reveals important barriers that prevent the expansion of e-invoicing, such as suppliers’ reluctance to implement e-invoicing, and IT infrastructures incompatibilities. Other issues examined by this study include the observed benefits from e-invoicing implementation, and the financial priorities of the organizations assumed to be supported by e-invoicing

  20. Interoperability for Enterprise Systems and Applications

    CERN Document Server

    Jardim-Gonçalves, Ricardo; Popplewell, Keith; Mendonça, João

    2016-01-01

    A concise reference to the state of the art in systems interoperability, Enterprise Interoperability VII will be of great value to engineers and computer scientists working in manufacturing and other process industries and to software engineers and electronic and manufacturing engineers working in the academic environment. Furthermore, it shows how knowledge of the meaning within information and the use to which it will be put have to be held in common between enterprises for consistent and efficient inter-enterprise networks. Over 30 papers, ranging from academic research through case studies to industrial and administrative experience of interoperability show how, in a scenario of globalised markets, where the capacity to cooperate with other organizations efficiently is essential in order to remain economically, socially and environmentally cost-effective, the most innovative digitized and networked enterprises ensure that their systems and applications are able to interoperate across heterogeneous collabo...

  1. Enterprise size and risk of hospital treated injuries among manual construction workers in Denmark: a study protocol

    DEFF Research Database (Denmark)

    Pedersen, Betina; Hannerz, Harald; Christensen, Ulla

    2011-01-01

    Background: In most countries throughout the world the construction industry continues to account for a disturbingly high proportion of fatal and nonfatal injuries. Research has shown that large enterprises seem to be most actively working for a safe working environment when compared to small...

  2. Green competitiveness research on Chinese automotive enterprises

    Directory of Open Access Journals (Sweden)

    Yuanhui Li

    2014-05-01

    Full Text Available Purpose: More and more executives of automobileindustry in China start to recognize the concept of green competitiveness recently. However, relatively less research attention has been devoted to the consideration of measurement. This paper aims to find empirical approach to quantify green competitiveness for automotive enterprises. The connotation of green competitiveness is explored and one suite of evaluation index system has been proposed with four dimensions including environmental, resource, capability and knowledge.Design/methodology/approach: By introducing the factor analysis method, green competitiveness has been measured through an empirical analysis of 24 automotive enterprises within China.Findings: The results indicate that those elements, such as enterprise resource possession and utilization; environment, responsibility and knowledge; profitability; management efficiency, have significant effect on the green competitiveness for automotive enterprises. The further analysis also unveils the advantages and disadvantages of green competitiveness for each company and the direction for improvement.Research limitations/implications: Guide regulators and managers of automobile industry to take some measures to enhance their green competitive advantage.Practical implications: Provide practical methods to measure green competitiveness for automotive enterprises.Originality/value: This paper proposes an evaluation index system of green competitiveness for automotive enterprises. The suggestions of our research will be beneficial to enterprise executives and industry regulators.

  3. Incorporating enterprise strategic plans into enterprise architecture

    NARCIS (Netherlands)

    Lins Borges Azevedo, Carlos

    2017-01-01

    In the last years, information technology (IT) executives have identified IT-business strategic alignment as a top management concern. In the information technology area, emphasis has been given to the Enterprise Architecture (EA) discipline with respect to enterprise management. The focus of the

  4. Environmental analysis in small and medium enterprises

    International Nuclear Information System (INIS)

    Luciani, R.; Andriola, L.; Di Franco, N.

    2001-01-01

    An environmental analysis is considered to be one of the primary goals for an enterprise environmental management. Nevertheless the complexity of the environmental problems and of its regulations prevents the small enterprises the possibility to perform an environmental policy (EMAS, ISO 14001). One of the most correct evaluation instrument for creating a datum-point standard could be the filling up a questionnaire, built up in according to the industrial enterprises need. It has the function of creating a primary step for a subsequent environmental management [it

  5. French enterprises build on wind power

    International Nuclear Information System (INIS)

    Rap, C.

    2013-01-01

    Being confronted by the economic crisis French enterprises look for diversification towards sectors which appear to bear promise of growth. The wind industry is one of them despite the slowing demand for land-based installations. A wind turbine is made of 11 components which represents a total of 3000 parts. A series of French enterprises benefit from this market by specialising in narrow market niches like bearings, toothed wheels,... This document gathers short information notes on the following enterprises: SKF, Mersen, les Forges de Trie-Chateau, Guerton, Rollix, and NTN-SNR. (A.C.)

  6. Key factors of enterprise innovation activity

    Directory of Open Access Journals (Sweden)

    Pichugina Maryna Anatoliivna

    2015-02-01

    Full Text Available The article deals with the studies of factors and conditions that define enterprise innovative activity. It is distinguished factors that influence the orientation on innovation of a company and factors that influence the innovation ability. It is noted an interdependence between innovative ability, orientation and activity. The article is also dedicated to analyses of influence specific industry characteristics and inner view of enterprise. It is discussed the influence of such factors as knowledge base, the organizational learning mechanisms, an external openness and the structure of innovative connections on the company opportunities to innovate. It is tried to focus on the impact of the environment on enterprise capabilities.

  7. Lesotho - Enterprise Survey

    Data.gov (United States)

    Millennium Challenge Corporation — The 2011 MCA-Lesotho baseline enterprise survey is a national survey of enterprises. The main objective of the survey was to assess the current status of businesses...

  8. Extended Enterprise performance Management

    NARCIS (Netherlands)

    Bobbink, Maria Lammerdina; Hartmann, Andreas

    2014-01-01

    The allegiance of partnering organisations and their employees to an Extended Enterprise performance is its proverbial sword of Damocles. Literature on Extended Enterprises focuses on collaboration, inter-organizational integration and learning to avoid diminishing or missing allegiance becoming an

  9. New Generation of Social Enterprises

    DEFF Research Database (Denmark)

    Persson, H. Thomas R.; Hafen, Niklas

    Global environmental awareness is a rapidly growing trend in society. In this respect, companies with an ecological profile have gained momentum. Just as an increasing number of consumers are demanding organically grown food, there is a growing demand for a clear, easily available and reliably...... ethical eco-option in the clothing industry. Dresstwice is thus a social enterprise that design and sell eco-friendly clothes for children....

  10. Inquiry and Enterprise Transformation

    Science.gov (United States)

    Bonney, Dean J.

    What really constitutes an Enterprise from an Enterprise Systems Engineering perspective? My effort to create a workable definition follows: An Enterprise is a complex system of community, individual, and semiotic systems defined by the way its authentic relationships are constructed and dependent on the ways the parties to these relationships bind to one another. The imprint of an Enterprise is projected through its spatial identity, an identity that builds and maintains its currency through the positive images and authentic relationships it embraces.

  11. Enterprise, Entrepreneurship and Ethics

    DEFF Research Database (Denmark)

    Hjorth, Daniel; Holt, Robin

    In the wake of calls for enterprise-led recovery amid Western economies, we critically investigate the enterprise discourse. Specifically, we challenge the association of enterprise and entrepreneurial activity. Using Foucault’s concept of parrrhesia - an ethical condition of brave speech - we ar...

  12. VEM: Virtual Enterprise Methodology

    DEFF Research Database (Denmark)

    Tølle, Martin; Vesterager, Johan

    2003-01-01

    This chapter presents a virtual enterprise methodology (VEM) that outlines activities to consider when setting up and managing virtual enterprises (VEs). As a methodology the VEM helps companies to ask the right questions when preparing for and setting up an enterprise network, which works...

  13. Market distortions and aggregate productivity: Evidence from Chinese energy enterprises

    International Nuclear Information System (INIS)

    Dai, Xiaoyong; Cheng, Liwei

    2016-01-01

    Market distortions can generate resource misallocations across heterogeneous firms and reduce aggregate productivity. This paper measures market distortions and aggregate productivity growth in China's energy sector. We use the wedge between output elasticities and factor shares in revenues to recover a measure of firm-level market distortions. Using data on a large sample of Chinese energy enterprises from 1999 to 2007, our estimations provide strong evidence of the existence of both factor and product market distortions within and across China's various energy industries. The productivity aggregation and decomposition results demonstrate that the estimated aggregate productivity growth (APG) is, on average, 2.595% points per year, of which technological change, resource reallocation, and firm entries and exits account for 1.981, 0.068, and 0.546% points, respectively. The weak contributions of resource reallocation and firm turnover to APG are also found in energy sub-industries, except in the coal industry. Our research suggests that China's energy sector has major potential for productivity gains from resource reallocation through the reduction of market distortions. - Highlights: •We estimate market distortions and productivity growth of China's energy sector. •We use a large sample of Chinese energy enterprises. •There are evidences of the existence of factor and product market distortions. •Aggregate productivity growth is largely driven by firm-level technological change. •China's energy sector can realize productivity gains from resource reallocations.

  14. Topical issues of labor at the concession enterprises in the USSR

    Directory of Open Access Journals (Sweden)

    Bulatov Vladimir Viktorovich

    2013-11-01

    Full Text Available In the 1920s in the USSR the total number of workers and employees at the concession enterprises did not exceed 0,7 % from the total number of ones in the country. Sometimes requirements about distribution of the Soviet labor law on all employees of the concession enterprise, irrespective of their nationality or citizenship, caused protests from foreign concessionaires. Economic interests often were behind those protests. Sometimes the Soviet partners made a compromise. The problem of a percentage ratio of the Soviet and foreign workers on concessions was an important one. In contracts, the number of foreigners usually was defined as 1020 percentage (often 15 % from each category of skilled workers. In the Far East of the USSR, the percent of attracted foreign labor was higher (4550 percentage of foreign workers and above. Specific weight of foreign employees at the concession enterprises officially could reach 50 %. There were many so-called «the former people» at the concession enterprises (representatives of the former bourgeoisie, the nobility, clergy, merchants and officers. Because of their origin, they could not get lob at the state enterprises. That is why in the 1920s at some concession enterprises of the USSR there were 30–35 % of workers with the higher education and 50–60 % with a secondary one. However, such high educational level of workers could take place only at the concession enterprises that were settling down in Moscow, Leningrad or in especially large industrial and cultural centers of the European part of the USSR. As a rule, almost at all concessions the average monthly salaries were higher, than at the one-branch state enterprises. For example, at peak of the Soviet concession practice (in 1928, the difference in salaries fluctuated from one to 60 % and tended to increase.

  15. Heat pump applications in utility centres for large industrial areas in the Netherlands

    NARCIS (Netherlands)

    Wit, J.B. de

    1999-01-01

    A grand design for industrial waste heat utilisation has been composed in Rijnmond Industrial Area, the largest (petrochemical) industrial area in The Netherlands. In combination with local CHP plants, an HP, MP and LP steam exchange system has been developed. The primary energy savings of this

  16. To Problem Pertaining to Provision of Electric Power Load Schedules of Power Sys- tems while Involving Potential of Power Technological Sources of Industrial Enterprises

    Directory of Open Access Journals (Sweden)

    B. M. Khroustalev

    2010-01-01

    Full Text Available The paper considers a possibility to use co-generated complexes having heat technological industrial load for operation in accordance with the requirements of irregularity of electric power generation schedule.

  17. The Effects of Internal Marketing on Customer Satisfaction in Chinese Restaurant Industry A Case Study of Haidilao Hot Pot Restaurant

    OpenAIRE

    Lu, Qing

    2013-01-01

    In service industry, many enterprises believe that external marketing is the most effective way to attract customers. However, they ignore that employees are the service providers whose attitudes and behaviors largely determine customers’ perception towards this corporation. Therefore, enterprises, especially in restaurant industry must implement a good internal marketing since it can motivate employees to create greater additional value for customers thus leading to high customer satisfactio...

  18. Large-Scale Selection and Breeding To Generate Industrial Yeasts with Superior Aroma Production

    Science.gov (United States)

    Steensels, Jan; Meersman, Esther; Snoek, Tim; Saels, Veerle

    2014-01-01

    The concentrations and relative ratios of various aroma compounds produced by fermenting yeast cells are essential for the sensory quality of many fermented foods, including beer, bread, wine, and sake. Since the production of these aroma-active compounds varies highly among different yeast strains, careful selection of variants with optimal aromatic profiles is of crucial importance for a high-quality end product. This study evaluates the production of different aroma-active compounds in 301 different Saccharomyces cerevisiae, Saccharomyces paradoxus, and Saccharomyces pastorianus yeast strains. Our results show that the production of key aroma compounds like isoamyl acetate and ethyl acetate varies by an order of magnitude between natural yeasts, with the concentrations of some compounds showing significant positive correlation, whereas others vary independently. Targeted hybridization of some of the best aroma-producing strains yielded 46 intraspecific hybrids, of which some show a distinct heterosis (hybrid vigor) effect and produce up to 45% more isoamyl acetate than the best parental strains while retaining their overall fermentation performance. Together, our results demonstrate the potential of large-scale outbreeding to obtain superior industrial yeasts that are directly applicable for commercial use. PMID:25192996

  19. Experience with LHC Magnets from Prototyping to Large Scale Industrial Production and Integration

    CERN Multimedia

    Rossi, L

    2004-01-01

    The construction of the LHC superconducting magnets is approaching its half way to completion. At the end of 2003, main dipoles cold masses for more than one octant were delivered; meanwhile the winding for the second octant was almost completed. The other large magnets, like the main quadrupoles and the insertion quadrupoles, have entered into series production as well. Providing more than 20 km of superconducting magnets, with the quality required for an accelerator like LHC, is an unprecedented challenge in term of complexity that has required many steps from the construction of 1 meterlong magnets in the laboratory to today’s production of more than one 15 meter-long magnet per day in Industry. The work and its organization is made even more complex by the fact that CERN supplies most of the critical components and part of the main tooling to the magnet manufacturers, both for cost reduction and for quality issues. In this paper the critical aspects of the construction will be reviewed and the actual ...

  20. Pooling knowledge and improving safety for contracted works at a large industrial park.

    Science.gov (United States)

    Agnello, Patrizia; Ansaldi, Silvia; Bragatto, Paolo

    2015-01-01

    At a large chemical park maintenance is contracted by the major companies operating the plants to many small firms. The cultural and psychological isolation of contractor workers was recognized a root cause of severe accidents in the recent years. That problem is common in chemical industry. The knowledge sharing has been assumed a good key to involve contractors and sub contractors in safety culture and contributing to injuries prevention. The selection of personal protective equipment PPE for the maintenance works has been taken as benchmark to demonstrate the adequateness of the proposed approach. To support plant operators, contractors and subcontractors in PPE discussion, a method has been developed. Its core is a knowledge-base, organized in an Ontology, as suitable for inferring decisions. By means of this tool all stakeholders have merged experience and information and find out the right PPE, to be provided, with adequate training and information package. PPE selection requires sound competencies about process and environmental hazards, including major accident, preventive and protective measures, maintenance activities. These pieces of knowledge previously fragmented among plant operators and contractors, have to be pooled, and used to find out the adequate PPE for a number of maintenance works. The PPE selection is per se important, but it is also a good chance to break the contractors' isolation and involve them in safety objectives. Thus by pooling experience and practical knowledge, the common understanding of safety issues has been strengthened.

  1. Carbon dioxide recycling: emerging large-scale technologies with industrial potential.

    Science.gov (United States)

    Quadrelli, Elsje Alessandra; Centi, Gabriele; Duplan, Jean-Luc; Perathoner, Siglinda

    2011-09-19

    This Review introduces this special issue of ChemSusChem dedicated to CO(2) recycling. Its aim is to offer an up-to-date overview of CO(2) chemical utilization (inorganic mineralization, organic carboxylation, reduction reactions, and biochemical conversion), as a continuation and extension of earlier books and reviews on this topic, but with a specific focus on large-volume routes and projects/pilot plants that are currently emerging at (pre-)industrial level. The Review also highlights how some of these routes will offer a valuable opportunity to introduce renewable energy into the existing energy and chemical infrastructure (i.e., "drop-in" renewable energy) by synthesis of chemicals from CO(2) that are easy to transport and store. CO(2) conversion therefore has the potential to become a key pillar of the sustainable and resource-efficient production of chemicals and energy from renewables. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  2. Improving SPAWAR PEO C4I Organizational Alignment to Better Enable Enterprise Technical Risk Management

    Science.gov (United States)

    2017-03-01

    dependency requires cross-system risk management . To this end, DOD, as well as businesses in many other industries, are turning toward enterprise...It does not address enterprise risk management . Enterprise risk management is not a new concept, originating in the mid-1990s in private industry...respective university’s business school, the concept of managing risk at an enterprise, or system-of-systems level is also taking hold in the DOD. To

  3. Industry

    International Nuclear Information System (INIS)

    Schindler, I.; Wiesenberger, H.

    2001-01-01

    This chapter of the environmental control report deals with the environmental impact of the industry in Austria. It gives a review of the structure and types of the industry, the legal framework and environmental policy of industrial relevance. The environmental situation of the industry in Austria is analyzed in detail, concerning air pollution (SO 2 , NO x , CO 2 , CO, CH 4 , N 2 O, NH 3 , Pb, Cd, Hg, dioxin, furans), waste water, waste management and deposit, energy and water consumption. The state of the art in respect of the IPPC-directives (European Integrated Pollution Prevention and Control Bureau) concerning the best available techniques of the different industry sectors is outlined. The application of European laws and regulations in the Austrian industry is described. (a.n.)

  4. Specific Features of Diagnostics of Efficiency of Management of Innovation Risks at Enterprises of the Baking Industry (Cost-is-no-object Approach

    Directory of Open Access Journals (Sweden)

    Bilynska Juliana V.

    2014-03-01

    Full Text Available The article analyses diagnostics of efficiency of management of innovation risks through cost optimisation. Management of costs on innovation grounds is carried out with the aim of their reduction. In order to realise measures on reduction of influence of innovation risks in the system of cost management the article specifies the most important factors and builds multi-factor models. The process of study of influence of the innovation risk upon the cost value of the sold products of bakeries is presented in the form of a scheme of logically united stages. The article takes into account all restrictions and requirements, eliminates multi-collinearity and uses MS Excel Regression analysis for modelling dynamic multi-factor models of cost value of sold products of the studied bakeries. In the result of the study the article obtains main factors that would be used for forecasting tendencies of development of the studied enterprises, development of the decision making system and improvement of methodical provision of innovation risk management.

  5. Industrial Performance of the Renewable Resources Industry in China

    Directory of Open Access Journals (Sweden)

    Dong Zhou

    2015-08-01

    Full Text Available Promoting the development of renewable resources industry is an effective way to solve the problems of resources shortage and environmental pollution in China. In this paper, studies have found that “market structure” and “ownership structure”, namely “double structure”, is an important explanatory variable that affects industrial performance according to the “structure-conduct-performance” paradigm. Literature reviews have shown that large state-owned enterprises are playing an important role in improving the industrial performance because of the advantage in technology and capital. However, this paper analyzed the performance of China’s renewable resource industry from two aspects—the overall industrial development and the listed companies, from which two conclusions have drawn: (1 Above a designated size, private enterprises have the greatest contribution, while the contribution of state-owned and foreign-funded enterprises is different; (2 The main reason for the high positive growth rate of total factor productivity between 2009 and 2013 is the rapid growth of technological progress such as the improvement of production processes and manufacturing skills, rather than the promotion of management, system, or polices.

  6. RANKING ENTERPRISES IN TERMS OF COMPETENCES INSIDE REGIONAL PRODUCTION NETWORK

    Directory of Open Access Journals (Sweden)

    Marko Mladineo

    2013-02-01

    Full Text Available Today's economic crisis has led to bankruptcy of many successful, but usually large-sized enterprises. This brought into question the future of large-sized enterprises. However, the only alternative to largesized enterprises (LEs is networking of small and medium-sized enterprises (SMEs into Regional Production Networks (RPNet. RPNet is non-hierarchical organizational form in which every SME is autonomous. Hence, every SME of production network is capable and wiling to be part of special cooperation inside network called Virtual Enterprise (VE. For each new product a new virtual enterprise is formed from different SMEs. The question is: which SMEs will be part of new virtual enterprise? If it is possible to evaluate SME's competences, it is also possible to rank SMEs. Ranking of SMEs according to technical, organizational and human competences is multi-criteria decision analysis (MCDA problem. So, in this paper PROMETHEE method is selected to perform a ranking of SMEs.

  7. The Integration of Timber Enterprises of the Khanty-Mansiysk Autonomous Okrug — Yugra

    Directory of Open Access Journals (Sweden)

    Irina Anatolyevna Kislukhina

    2018-03-01

    Full Text Available The article investigates the timber enterprises’ integration in Khanty-Mansiysk Autonomous Okrug — Yugra as a way to improve the efficiency of the timber industry. Currently, in the region, only 10 of 130 timber enterprises are large and mediumsized enterprises. The other companies are small and chronically underfunded. These small enterprises use outdated equipment and production technology, are unable to organize wood processing and reforestation; to develop forest infrastructure. However, the integration of timber industry enterprises can become the way to address this situation. The article discusses various types of possible enterprises’ integration, such as vertical and horizontal integrations, the combined and unrelated diversification (financial integration. The combined diversification is a mixed type of the integration of enterprises from related and unrelated industries. This type of integration is most in keeping with the characteristics of the development of timber industry of Khanty- Mansiysk Autonomous Okrug — Yugra. The combined diversification will maximize the effect from the association of enterprises. The author has justified the rationale for establishing six integrated industrial and financial associations (IIFA according to improved forest and economical zoning of Okrug area. I defined the profile of each IIFA taking into account of special aspects of forest resources as well as social and economical development characteristics of the area and demand for the products. In Khanty-Mansiysk Autonomous Okrug — Yugra, the integrated industrial and financial associations will address four critical challenges of the socio-economic development of the region. Firstly, these associations will contribute to the diversification of the economy. Secondly, they will enable the production of new types of forest products. Thirdly, the creation of the integrated industrial and financial associations will increase the efficiency in

  8. Collaborative research between academia and industry using a large clinical trial database: a case study in Alzheimer's disease

    DEFF Research Database (Denmark)

    Jones, Roy; Wilkinson, David; Lopez, Oscar L

    2011-01-01

    Large clinical trials databases, developed over the course of a comprehensive clinical trial programme, represent an invaluable resource for clinical researchers. Data mining projects sponsored by industry that use these databases, however, are often not viewed favourably in the academic medical...... community because of concerns that commercial, rather than scientific, goals are the primary purpose of such endeavours. Thus, there are few examples of sustained collaboration between leading academic clinical researchers and industry professionals in a large-scale data mining project. We present here...

  9. Adding agility to Enterprise Process and Data Engineering

    Directory of Open Access Journals (Sweden)

    Sergey Zykov

    2016-04-01

    Full Text Available Managing development of large and complex enterprise architectures is a key problem in enterprise engineering. Nowadays one of the breathtaking topics considering enterprise context is real-time system agility. The paper discusses an appropriate general architecture pattern and provides insights how dynamic process management environment could be made. We survey general enterprise software architecture and current agility problems. We introduce a special component called a process knowledge base and justify its crucial role in achieving agility within the enterprise. We study both the architecture of the process knowledge base as well as formal basis for its implementation which relies upon the type theory.

  10. A Research on Enterprise Patent Protection and Innovation Strategy

    Institute of Scientific and Technical Information of China (English)

    Zeng Sumei

    2017-01-01

    In the 21st century, high-tech serves as the foundation of competitiveness for the whole world, at the same time, intellectual property, especially the patent has become an effective means for an enterprise to participate in the international competition, and intellectual property is also the key strategic resource to gain competitive advantage. In effect, the competition amongst enterprises is mainly concerning the competition of patent technology. Those enterprises with a large number of high level professional powers gain the initiative edge of survival. Therefore, it is vital for the enterprise to adopt the patent protection and innovation strategy, so as to elevate the survival ability and competitiveness of an enterprise.

  11. The structural changes of the food industry in the European Union

    DEFF Research Database (Denmark)

    Hajderllari, Luljeta; Karantininis, Konstantinos

    This paper studies the structural changes of food industry in the EU-27. We first provide a detailed description of the relative importance of the various sectors in the food industry. The structure is studied by calculating Gini coefficients for the EU members with regard to food industry. We find...... that the food industry is one of the most important components of the manufacturing sectors in terms of turnover and employment. Enterprises in the EU are relatively large in terms of turnover but small in the number of enterprises with the dairy and meat sectors being the most important branches of the food...... industry regarding the share of turnover, employment and enterprises. During the eight years 2000-2007, the Gini coefficient of the food industry in the EU is very close to 1, indicating a high degree of concentration....

  12. An Industrial Cloud: Integrated Operations in Oil and Gas in the Norwegian Continental Shelf

    Science.gov (United States)

    Rong, Chunming

    Cloud computing may provide the long waiting technologies and methodologies for large scale industrial collaboration across disciplines and enterprise boundaries. Industrial cloud is introduced as a new inter-enterprise integration concept in cloud computing. Motivations and advantages are given by a practical exploration of the concept from the perspective of the on-going effort by the Norwegian oil and gas industry to build industry wide information integration and collaboration. ISO15926 is recognized as a standard enabling cross boundaries data integration and processing.

  13. Thermal performance assessment of a large aperture concentrating collector in an industrial application in Chile

    Science.gov (United States)

    Murray, Clare; Pino, Alan; Cardemil, José Miguel; Escobar, Rodrigo

    2017-06-01

    The application of solar thermal energy to meet the heat demands of the food and beverage processing industry in Chile has huge potential. This paper presents an assessment of the first large aperture trough collector installed in Latin America. The collector preheats water for a boiler in a juice-concentrating factory, 100 km north of Santiago. An analysis of the system for a day in November indicates the system was not able to utilize the heat generated, resulting in rapid de- and refocusing of the collector and problems with sensor calibration. An analysis of a day in March indicates the tracking algorithm has not correctly aligned the collector with the sun's position. An investigation into the design document reveals that the meteorological data underestimates the actual irradiation values by 40%, resulting in an oversized system given the actual conditions. To increase the energy gain in the system it is proposed to increase the working pressure from the current value of 1.5bar to up to 5bar, which could increase the system utilization from 41% to 65% and reduce the dumped energy to near zero. The simulation results with actual weather data and a fixed inlet temperature indicate the annual solar fraction could increase from the design value of 8.1% to 31.8% with a working pressure of 5 bar. The plant presents multiple opportunities for improvement not only to the performance of the plant but also in the design and installation of solar thermal systems in Chile in the future.

  14. Enterprise architecture management

    DEFF Research Database (Denmark)

    Rahimi, Fatemeh; Gøtze, John; Møller, Charles

    2017-01-01

    Despite the growing interest in enterprise architecture management, researchers and practitioners lack a shared understanding of its applications in organizations. Building on findings from a literature review and eight case studies, we develop a taxonomy that categorizes applications of enterprise...... architecture management based on three classes of enterprise architecture scope. Organizations may adopt enterprise architecture management to help form, plan, and implement IT strategies; help plan and implement business strategies; or to further complement the business strategy-formation process....... The findings challenge the traditional IT-centric view of enterprise architecture management application and suggest enterprise architecture management as an approach that could support the consistent design and evolution of an organization as a whole....

  15. Enterprise architecture management

    DEFF Research Database (Denmark)

    Rahimi, Fatemeh; Gøtze, John; Møller, Charles

    2017-01-01

    architecture management based on three classes of enterprise architecture scope. Organizations may adopt enterprise architecture management to help form, plan, and implement IT strategies; help plan and implement business strategies; or to further complement the business strategy-formation process......Despite the growing interest in enterprise architecture management, researchers and practitioners lack a shared understanding of its applications in organizations. Building on findings from a literature review and eight case studies, we develop a taxonomy that categorizes applications of enterprise....... The findings challenge the traditional IT-centric view of enterprise architecture management application and suggest enterprise architecture management as an approach that could support the consistent design and evolution of an organization as a whole....

  16. New clean energy enterprises and sustainable development

    Energy Technology Data Exchange (ETDEWEB)

    Usher, Eric [United Nations Environment Programme, Rural Energy Enterprise Development (REED), Paris (France); Xiaodong Wang [United Nations Foundation, Climate Change Program, Washington, DC (United States)

    2002-06-01

    Though hundreds of billions of dollars have been invested, past development efforts have been largely unable to break the cycle of poverty - a cycle that is directly linked to the provision of energy. Too often, the potential of local enterprises to provide essential energy services has been ignored. Yet such an enterprise is one of the most potent engines for shifting towards a local human capacity to produce and distribute modern energy services. This recognition lies at the heart of REED, an approach to developing new sustainable energy enterprises that use clean, efficient and renewable energy technologies to meet the energy needs of underserved populations. (Author)

  17. A method of assessment of sustainability of social and labor relations of a city-forming enterprise and a single-industry town

    Directory of Open Access Journals (Sweden)

    Roshina Irina

    2016-01-01

    Full Text Available In this article we consider one of the tools for managing a single-industry town – a method of assessment of its social and labor relations sustainability. We describe a mathematical model of calculating the integrated index and give instant assessment examples.

  18. Energy innovation is a management task. The energy industry is too important a sector to be left to free enterprise alone

    Energy Technology Data Exchange (ETDEWEB)

    1979-06-01

    At the Hanover Fair, Dr. Volker Hauff, Federal Minister for Research and Technology, invited interested parties to a podium discussion on the subject of 'innovation management - a European task for industry and state's. His contribution to this discussion is summarized by Rudolf v. Bennigsen-Foerder, board chairman of VEBA-AG.

  19. Marketing Strategy Analysis for Small and Medium Scale Business Enterprise (SMEs) for Home Industry Furniture in Leilem, the Regency of Minahasa

    Science.gov (United States)

    Pangemanan, S. A.; Walukow, I. M.

    2018-01-01

    Leilem is a small village located in Minahasa Regency. This village is well known for furniture products made of Timber. Eventhough the village has been producing various furniture products with high quality since many decades ago, it has not been able to compete with other new entries such furniture from Java, Synthetic Ratan, Plywood and plastic based furniture. The monotonous design and the finishing works done on the furniture have been some of the major issues in the decline of home furniture. The research explores problems and challenges faced by the furniture home Industry. It will also aim at identifying the internal and external factors that prevent the home industry to compete and survive. In the end the research will develop the strategic positioning of the home industry in the midst of competition. The research methodology employs descriptive analysis in which data are collected through observation, interview, and questionnaire. This methodology is combined with IFE (Internal Factor Evaluation) and EFE (External Factor Evaluation) Matrix, SPACE Matrix and SWOT Analysis and QSPM (Quantitative Strategic Planning Matrix). The sample is 66 business people, of 823 craftsmen who are working in this business. The result shows this home industry is very competitive in terms of consistency, but in terms of promotion, product quality, price, product diversification, design training of furniture, management and economic scale, it is lagging behind. The home industry should be able to develop marketing networking, improve design and product quality, promotion and cost control, product diversification and these can only be done by intensive training in managing business and investment.

  20. Spatial pattern of foreign direct investment of China's textile enterprises

    Institute of Scientific and Technical Information of China (English)

    2018-01-01

    China textile industry has achieved encouraging achievements, becoming the primary industry of the integration of investment, production, consumption, employment increase and foreign exchange earnings. On the basis of reviewing studies on foreign direct investment of domestic textile enterprises, this paper come up with the structure analysis framework of spatial strategies of foreign investment of China's textile enterprises with the methods of statistical information, field research and interviews of senior managers. Besides, this paper analyze the spatial distribution and industry choices of foreign direct investment of China's textile enterprises.

  1. Depositional history of sedimentary linear alkylbenzenes (LABs) in a large South American industrial coastal area (Santos Estuary, Southeastern Brazil)

    International Nuclear Information System (INIS)

    Martins, Cesar C.; Bicego, Marcia C.; Mahiques, Michel M.; Figueira, Rubens C.L.; Tessler, Moyses G.; Montone, Rosalinda C.

    2010-01-01

    This paper reports the reconstruction of the contamination history of a large South American industrial coastal area (Santos Estuary, Brazil) using linear alkylbenzenes (LABs). Three sediment cores were dated by 137 Cs. Concentrations in surficial layers were comparable to the midrange concentrations reported for coastal sediments worldwide. LAB concentrations increased towards the surface, indicating increased waste discharges into the estuary in recent decades. The highest concentration values occurred in the early 1970s, a time of intense industrial activity and marked population growth. The decreased LAB concentration, in the late 1970s was assumed to be the result of the world oil crisis. Treatment of industrial effluents, which began in 1984, was represented by decreased LAB levels. Microbial degradation of LABs may be more intense in the industrial area sediments. The results show that industrial and domestic waste discharges are a historical problem in the area. - The contamination history of a large South American industrial coastal area indicated by molecular indicator of sewage input.

  2. Governing for Enterprise Security

    National Research Council Canada - National Science Library

    Allen, Julia

    2005-01-01

    ... business. If an organization's management -- including boards of directors, senior executives, and all managers -- does not establish and reinforce the business need for effective enterprise security...

  3. Enterprise Architecture (EA) Roadmap

    Data.gov (United States)

    Office of Personnel Management — The Enterprise Roadmap reflects the information technology (IT) investment priorities established in agency PortfolioStat reviews, as well as IT program decisions...

  4. Lightweight enterprise architectures

    CERN Document Server

    Theuerkorn, Fenix

    2004-01-01

    STATE OF ARCHITECTUREArchitectural ChaosRelation of Technology and Architecture The Many Faces of Architecture The Scope of Enterprise Architecture The Need for Enterprise ArchitectureThe History of Architecture The Current Environment Standardization Barriers The Need for Lightweight Architecture in the EnterpriseThe Cost of TechnologyThe Benefits of Enterprise Architecture The Domains of Architecture The Gap between Business and ITWhere Does LEA Fit? LEA's FrameworkFrameworks, Methodologies, and Approaches The Framework of LEATypes of Methodologies Types of ApproachesActual System Environmen

  5. A Comparison of Customer Relationships between Large Chain Stores and Small Local Stores in the Fashion Industry

    OpenAIRE

    Krstevska, Biljana

    2017-01-01

    This research investigates customer relationships of two distinct store formats (small local stores and large chain stores) in the fashion industry. The aim is to find out if there are differences between the store formats regarding customer relationships. Relationship marketing theory was used to formulate hypotheses. Shoppers of small local stores and large chain stores in Würzburg, Germany, were surveyed to test the hypotheses. Results indicate that customer relationships significantly dif...

  6. Measurements of Tenorm in an enterprise related with the petroleum industry; Mediciones de Tenorm en una empresa relacionada con la industria petrolera

    Energy Technology Data Exchange (ETDEWEB)

    Gnoni, G.; Canoba, A. [Autoridad Regulatoria Nuclear, Av. Del Libertador 8250 Ciudad de Buenos Aires (1429) (Argentina)]. e-mail: ggnoni@cae.arn.gov.ar

    2006-07-01

    Some industries in its processes concentrate natural radionuclides. Among these industries are the industry of the gas and the petroleum. These materials naturally radioactive concentrated by certain industries are known as TENORM (technologically enhanced naturally occurring radioactive material). As part of a project that has by objective to determine possible contaminations with TENORM materials in the industry, it was carried out an evaluation to a company related with the oil industry. The company provides teams and systems used in the production wells. In the plant it proceeds to the armed one with new components or with recovered parts of used equipment. Its were carried out measurements of dose rate in the place. In the first place it was carried out a screening monitoring, in order to detect hot points. In those cases in that hot points were not detected, pieces were selected to measure in contact, considering it origin, function and visual inspection of the same ones. The measured dose rate in most of the pieces was inside the radiation bottom levels. Its were found some pieces with greater dose rates at the bottom and only isolated cases that were up to ten times greater to the same one. The annual effective dose estimated in preservative form, only considering the external exposure via, starting from the most high value measured was similar to 0.6 mSv.a{sup -1}, value far from the one dose limit settled down for workers (20 mSv.a{sup -1}) and also smaller to the one dose limit settled down for public (1 mSv.a{sup -1}). Its took oily crusts samples, wash water, and cleaning sands for the later analysis in the laboratory. The samples were analyzed by gamma spectrometry and the uranium concentration by fluorimetry. Starting from the measurements carried out in the laboratories, it was confirmed that the involved radionuclides are the Ra-226 and Ra-228 and that the uranium doesn't concentrate on the present inlays in the pieces analyzed, in agreement

  7. Industrialization

    African Journals Online (AJOL)

    Lucy

    . African states as ... regarded as the most important ingredients that went to add value to land and labour in order for countries ... B. Sutcliffe Industry and Underdevelopment (Massachusetts Addison – Wesley Publishing Company. 1971), pp.

  8. Industrialization

    African Journals Online (AJOL)

    Lucy

    scholar, Walt W. Rostow presented and supported this line of thought in his analysis of ... A Brief Historical Background of Industrialization in Africa ... indicative) The western model allowed for the political economy to be shaped by market.

  9. Partners for Progress and Prosperity in the Global Chemistry Enterprise

    Science.gov (United States)

    In the past several years, there have been many changes facing the global chemistry enterprise. Whereas the overall chemistry enterprise appears to be strong and the chemical industry is still a major contributor to GDP, many chemistry-based products have been commoditized, and chemical employment h...

  10. Enterprise Education: A New Social Ethic for Higher Education?

    Science.gov (United States)

    Foreman-Peck, L.

    1993-01-01

    Review of a British initiative to develop entrepreneurship courses in higher education concludes that meeting industry demands can lead to conservative credentialism instead of enterprising qualities. Enterprise education should be concerned with present and future needs of employers, rather than their demands. (SK)

  11. HP advances Grid Strategy for the adaptive enterprise

    CERN Multimedia

    2003-01-01

    "HP today announced plans to further enable its enterprise infrastructure technologies for grid computing. By leveraging open grid standards, HP plans to help customers simplify the use and management of distributed IT resources. The initiative will integrate industry grid standards, including the Globus Toolkit and Open Grid Services Architecture (OGSA), across HP's enterprise product lines" (1 page).

  12. Collaborative research between academia and industry using a large clinical trial database: a case study in Alzheimer's disease

    DEFF Research Database (Denmark)

    Jones, Roy; Wilkinson, David; Lopez, Oscar L

    2011-01-01

    community because of concerns that commercial, rather than scientific, goals are the primary purpose of such endeavours. Thus, there are few examples of sustained collaboration between leading academic clinical researchers and industry professionals in a large-scale data mining project. We present here...... a successful example of this type of collaboration in the field of dementia....

  13. Increasing the reliability of electricity supply of industrial enterprises for the account of application of a quick-running redundant power supply

    Directory of Open Access Journals (Sweden)

    Vertugin A.A.

    2017-06-01

    Full Text Available One of the main tasks to be performed when organizing the operation of the energy system is to ensure high-quality and uninterrupted power supply to consumers. Dips, interruptions and voltage surges of the electrical network are the most common causes of malfunctions in industrial plants and damage to household equipment, causing significant economic damage to both consumers and electricity suppliers.

  14. Effect of Managerial Ownership, Free Cash Flow and Size Company Policy on Debt (Empirical Study on Industrial Enterprises Basic and Chemicals Listed in Bei)

    OpenAIRE

    Hasan, Mudrika Alamsyah

    2013-01-01

    The purpose of this study was to obtain empirical evidence about the effect of managerial ownership structure, free cash flow and the size of the companys debt policy the Basic Industry and Chemicals companies listed on the Stock Exchange.The population in this research is the basic chemical sector companies listed on the Indonesia Stock Exchange during the last three years, is from the years 2009-2011, amounting to 43 companies, using purposive sampling and the sampling results obtained by 3...

  15. Toxic elements (As, Se, Cd, Hg, Pb) and their mineral and technogenic formations in the snow cover in the vicinity of the industrial enterprises of Tomsk

    International Nuclear Information System (INIS)

    Talovskaya, A V; Filimonenko, E A; Osipova, N A; Lyapina, E E; Azikov, E G Y

    2014-01-01

    Snow samples were collected in four industrial areas of Tomsk where brickworks, factories for the production of reinforced concrete structures, machine repair industries and local boilers, petrochemical plant and thermal power station are located. Study of insoluble fraction of aerosols in snow and melted snow water was performed to determine the contents of the emissions from these facilities. The insoluble fraction of aerosols in snow is aerosol particles deposited on snow cover. As, Se, Cd, Hg, Pb concentration was analyzed by inductively coupled plasma mass spectrometry (ICP-MS). Mineral modes of the elements were determined by scanning electron microscope. It was found the snow cover is mainly polluted by As, Se, Cd, Hg, Pb in the thermal power station impact area, by As – in the brickworks impact area, by Se – in the impact area of densely located factories for the production of reinforced concrete structures, machine repair industries and local boilers. The research results show that the mineral modes of As are associated with arsenopyrite, of Pb – with galena in the insoluble fraction of aerosols in snow

  16. THE ROLE OF ENTERPRISE PORTALS IN ENTERPRISE INTEGRATION

    Directory of Open Access Journals (Sweden)

    Gianina RIZESCU

    2006-01-01

    Full Text Available Today’s enterprises are moving business systems to the Internet - to connect people, business processes, and people to business processes in enterprise and across enterprise boundaries. The portal brings it all together: business processes, departmental sites, knowledge management resources, enterprise management systems, CRM systems, analytics, email, calendars, external content, transactions,administration, workflow, and more. The goal of this paper is to present the role of the Enterprise Portal in internal and external enterprise integration.

  17. Industry

    Energy Technology Data Exchange (ETDEWEB)

    Bernstein, Lenny; Roy, Joyashree; Delhotal, K. Casey; Harnisch, Jochen; Matsuhashi, Ryuji; Price, Lynn; Tanaka, Kanako; Worrell, Ernst; Yamba, Francis; Fengqi, Zhou; de la Rue du Can, Stephane; Gielen, Dolf; Joosen, Suzanne; Konar, Manaswita; Matysek, Anna; Miner, Reid; Okazaki, Teruo; Sanders, Johan; Sheinbaum Parado, Claudia

    2007-12-01

    This chapter addresses past, ongoing, and short (to 2010) and medium-term (to 2030) future actions that can be taken to mitigate GHG emissions from the manufacturing and process industries. Globally, and in most countries, CO{sub 2} accounts for more than 90% of CO{sub 2}-eq GHG emissions from the industrial sector (Price et al., 2006; US EPA, 2006b). These CO{sub 2} emissions arise from three sources: (1) the use of fossil fuels for energy, either directly by industry for heat and power generation or indirectly in the generation of purchased electricity and steam; (2) non-energy uses of fossil fuels in chemical processing and metal smelting; and (3) non-fossil fuel sources, for example cement and lime manufacture. Industrial processes also emit other GHGs, e.g.: (1) Nitrous oxide (N{sub 2}O) is emitted as a byproduct of adipic acid, nitric acid and caprolactam production; (2) HFC-23 is emitted as a byproduct of HCFC-22 production, a refrigerant, and also used in fluoroplastics manufacture; (3) Perfluorocarbons (PFCs) are emitted as byproducts of aluminium smelting and in semiconductor manufacture; (4) Sulphur hexafluoride (SF{sub 6}) is emitted in the manufacture, use and, decommissioning of gas insulated electrical switchgear, during the production of flat screen panels and semiconductors, from magnesium die casting and other industrial applications; (5) Methane (CH{sub 4}) is emitted as a byproduct of some chemical processes; and (6) CH{sub 4} and N{sub 2}O can be emitted by food industry waste streams. Many GHG emission mitigation options have been developed for the industrial sector. They fall into three categories: operating procedures, sector-wide technologies and process-specific technologies. A sampling of these options is discussed in Sections 7.2-7.4. The short- and medium-term potential for and cost of all classes of options are discussed in Section 7.5, barriers to the application of these options are addressed in Section 7.6 and the implication of

  18. Enterprise Education as Pedagogy

    Science.gov (United States)

    Jones, Brian; Iredale, Norma

    2010-01-01

    Purpose: This paper seeks to suggest that the most appropriate way to construe the concept of enterprise education is from a pedagogical viewpoint. Enterprise education as pedagogy is argued to be the most appropriate way to think about the concept and serves to demarcate it from entrepreneurship education, which is very much about business…

  19. It's Entrepreneurship, not Enterprise

    DEFF Research Database (Denmark)

    Hjorth, Daniel; Holt, Robin

    2016-01-01

    We challenge the obvious and easy association of enterprise and entrepreneurship. We do so by arguing that entrepreneurship is inherently social and collective, something that is concealed when held up as example of enterprising behaviour. We use as an illustrative case the Chinese artist Ai Weiwei...

  20. Survey of Micro Enterprise.

    Science.gov (United States)

    European Social Fund, Dublin (Ireland).

    Government support of microenterprise/entrepreneurship in Ireland was examined through structured interviews with 81 of 120 microentrepreneurs (68% response rate) identified as clients of local enterprise support agencies and/or completers of enterprise training and structured interviews with representatives of 25 local, voluntary, and private…