A brief overview of NASA Langley's research program in formal methods
1992-01-01
An overview of NASA Langley's research program in formal methods is presented. The major goal of this work is to bring formal methods technology to a sufficiently mature level for use by the United States aerospace industry. Towards this goal, work is underway to design and formally verify a fault-tolerant computing platform suitable for advanced flight control applications. Also, several direct technology transfer efforts have been initiated that apply formal methods to critical subsystems of real aerospace computer systems. The research team consists of six NASA civil servants and contractors from Boeing Military Aircraft Company, Computational Logic Inc., Odyssey Research Associates, SRI International, University of California at Davis, and Vigyan Inc.
NASA Langley's Formal Methods Research in Support of the Next Generation Air Transportation System
Butler, Ricky W.; Munoz, Cesar A.
2008-01-01
This talk will provide a brief introduction to the formal methods developed at NASA Langley and the National Institute for Aerospace (NIA) for air traffic management applications. NASA Langley's formal methods research supports the Interagency Joint Planning and Development Office (JPDO) effort to define and develop the 2025 Next Generation Air Transportation System (NGATS). The JPDO was created by the passage of the Vision 100 Century of Aviation Reauthorization Act in Dec 2003. The NGATS vision calls for a major transformation of the nation s air transportation system that will enable growth to 3 times the traffic of the current system. The transformation will require an unprecedented level of safety-critical automation used in complex procedural operations based on 4-dimensional (4D) trajectories that enable dynamic reconfiguration of airspace scalable to geographic and temporal demand. The goal of our formal methods research is to provide verification methods that can be used to insure the safety of the NGATS system. Our work has focused on the safety assessment of concepts of operation and fundamental algorithms for conflict detection and resolution (CD&R) and self- spacing in the terminal area. Formal analysis of a concept of operations is a novel area of application of formal methods. Here one must establish that a system concept involving aircraft, pilots, and ground resources is safe. The formal analysis of algorithms is a more traditional endeavor. However, the formal analysis of ATM algorithms involves reasoning about the interaction of algorithmic logic and aircraft trajectories defined over an airspace. These trajectories are described using 2D and 3D vectors and are often constrained by trigonometric relations. Thus, in many cases it has been necessary to unload the full power of an advanced theorem prover. The verification challenge is to establish that the safety-critical algorithms produce valid solutions that are guaranteed to maintain separation
DEFF Research Database (Denmark)
Bjørner, Dines; Havelund, Klaus
2014-01-01
In this "40 years of formal methods" essay we shall first delineate, Sect. 1, what we mean by method, formal method, computer science, computing science, software engineering, and model-oriented and algebraic methods. Based on this, we shall characterize a spectrum from specification-oriented met...
Industrial use of formal methods formal verification
Boulanger, Jean-Louis
2012-01-01
At present the literature gives students and researchers of the very general books on the formal technics. The purpose of this book is to present in a single book, a return of experience on the used of the "formal technics" (such proof and model-checking) on industrial examples for the transportation domain. This book is based on the experience of people which are completely involved in the realization and the evaluation of safety critical system software based. The implication of the industrialists allows to raise the problems of confidentiality which could appear and so allow
Formal Methods: Practice and Experience
DEFF Research Database (Denmark)
Woodcock, Jim; Larsen, Peter Gorm; Bicarregui, Juan
2009-01-01
. Based on this, we discuss the issues surrounding the industrial adoption of formal methods. Finally, we look to the future and describe the development of a Verified Software Repository, part of the worldwide Verified Software Initiative. We introduce the initial projects being used to populate...... the repository, and describe the challenges they address. © 2009 ACM. (146 refs.)...
Automatic Testing with Formal Methods
Tretmans, G.J.; Belinfante, Axel
1999-01-01
The use of formal system specifications makes it possible to automate the derivation of test cases from specifications. This allows to automate the whole testing process, not only the test execution part of it. This paper presents the state of the art and future perspectives in testing based on
Formal Methods for Life-Critical Software
Butler, Ricky W.; Johnson, Sally C.
1993-01-01
The use of computer software in life-critical applications, such as for civil air transports, demands the use of rigorous formal mathematical verification procedures. This paper demonstrates how to apply formal methods to the development and verification of software by leading the reader step-by-step through requirements analysis, design, implementation, and verification of an electronic phone book application. The current maturity and limitations of formal methods tools and techniques are then discussed, and a number of examples of the successful use of formal methods by industry are cited.
Industrial Practice in Formal Methods : A Review
DEFF Research Database (Denmark)
Bicarregui, Juan C.; Fitzgerald, John; Larsen, Peter Gorm
2009-01-01
We examine the the industrial application of formal methods using data gathered in a review of 62 projects taking place over the last 25 years. The review suggests that formal methods are being applied in a wide range of application domains, with increasingly strong tool support. Significant chal...... challenges remain in providing usable tools that can be integrated into established development processes; in education and training; in taking formal methods from first use to second use, and in gathering and evidence to support informed selection of methods and tools.......We examine the the industrial application of formal methods using data gathered in a review of 62 projects taking place over the last 25 years. The review suggests that formal methods are being applied in a wide range of application domains, with increasingly strong tool support. Significant...
A Formal Methods Approach to the Analysis of Mode Confusion
Butler, Ricky W.; Miller, Steven P.; Potts, James N.; Carreno, Victor A.
2004-01-01
models and analyses can be used to help eliminate mode confusion from flight deck designs and at the same time increase our confidence in the safety of the implementation. The paper is based upon interim results from a new project involving NASA Langley and Rockwell Collins in applying formal methods to a realistic business jet Flight Guidance System (FGS).
Application of Formal Methods in Software Engineering
Directory of Open Access Journals (Sweden)
Adriana Morales
2011-12-01
Full Text Available The purpose of this research work is to examine: (1 why are necessary the formal methods for software systems today, (2 high integrity systems through the methodology C-by-C –Correctness-by-Construction–, and (3 an affordable methodology to apply formal methods in software engineering. The research process included reviews of the literature through Internet, in publications and presentations in events. Among the Research results found that: (1 there is increasing the dependence that the nations have, the companies and people of software systems, (2 there is growing demand for software Engineering to increase social trust in the software systems, (3 exist methodologies, as C-by-C, that can provide that level of trust, (4 Formal Methods constitute a principle of computer science that can be applied software engineering to perform reliable process in software development, (5 software users have the responsibility to demand reliable software products, and (6 software engineers have the responsibility to develop reliable software products. Furthermore, it is concluded that: (1 it takes more research to identify and analyze other methodologies and tools that provide process to apply the Formal Software Engineering methods, (2 Formal Methods provide an unprecedented ability to increase the trust in the exactitude of the software products and (3 by development of new methodologies and tools is being achieved costs are not more a disadvantage for application of formal methods.
Applied Formal Methods for Elections
DEFF Research Database (Denmark)
Wang, Jian
development time, or second dynamically, i.e. monitoring while an implementation is used during an election, or after the election is over, for forensic analysis. This thesis contains two chapters on this subject: the chapter Analyzing Implementations of Election Technologies describes a technique...... process. The chapter Measuring Voter Lines describes an automated data collection method for measuring voters' waiting time, and discusses statistical models designed to provide an understanding of the voter behavior in polling stations....
Applied Formal Methods for Elections
DEFF Research Database (Denmark)
Wang, Jian
Information technology is changing the way elections are organized. Technology renders the electoral process more efficient, but things could also go wrong: Voting software is complex, it consists of over thousands of lines of code, which makes it error-prone. Technical problems may cause delays...... bounded model-checking and satisfiability modulo theories (SMT) solvers can be used to check these criteria. Voter Experience: Technology profoundly affects the voter experience. These effects need to be measured and the data should be used to make decisions regarding the implementation of the electoral...... at polling stations, or even delay the announcement of the final result. This thesis describes a set of methods to be used, for example, by system developers, administrators, or decision makers to examine election technologies, social choice algorithms and voter experience. Technology: Verifiability refers...
Protocol design and implementation using formal methods
van Sinderen, Marten J.; Ferreira Pires, Luis; Pires, L.F.; Vissers, C.A.
1992-01-01
This paper reports on a number of formal methods that support correct protocol design and implementation. These methods are placed in the framework of a design methodology for distributed systems that was studied and developed within the ESPRIT II Lotosphere project (2304). The paper focuses on
What makes industries believe in formal methods
Vissers, C.A.; van Sinderen, Marten J.; Ferreira Pires, Luis; Pires, L.F.; Danthine, A.S.; Leduc, G.; Wolper, P.
1993-01-01
The introduction of formal methods in the design and development departments of an industrial company has far reaching and long lasting consequences. In fact it changes the whole environment of methods, tools and skills that determine the design culture of that company. A decision to replace current
On the Need for Practical Formal Methods
1998-01-01
additional research and engineering that is needed to make the current set of formal methods more practical. To illustrate the ideas, I present several exam ...either a good violin or a highly talented violinist. Light-weight techniques o er software developers good violins . A user need not be a talented
Formal Method of Description Supporting Portfolio Assessment
Morimoto, Yasuhiko; Ueno, Maomi; Kikukawa, Isao; Yokoyama, Setsuo; Miyadera, Youzou
2006-01-01
Teachers need to assess learner portfolios in the field of education. However, they need support in the process of designing and practicing what kind of portfolios are to be assessed. To solve the problem, a formal method of describing the relations between the lesson forms and portfolios that need to be collected and the relations between…
A Survey of Formal Methods in Software Development
DEFF Research Database (Denmark)
Bjørner, Dines
2012-01-01
The use of formal methods and formal techniques in industry is steadily growing. In this survey we shall characterise what we mean by software development and by a formal method; briefly overview a history of formal specification languages - some of which are: VDM (Vienna Development Method, 1974...... need for multi-language formalisation (Petri Nets, MSC, StateChart, Temporal Logics); the sociology of university and industry acceptance of formal methods; the inevitability of the use of formal software development methods; while referring to seminal monographs and textbooks on formal methods....
Versatile Formal Methods Applied to Quantum Information.
Energy Technology Data Exchange (ETDEWEB)
Witzel, Wayne [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Rudinger, Kenneth Michael [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Sarovar, Mohan [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)
2015-11-01
Using a novel formal methods approach, we have generated computer-veri ed proofs of major theorems pertinent to the quantum phase estimation algorithm. This was accomplished using our Prove-It software package in Python. While many formal methods tools are available, their practical utility is limited. Translating a problem of interest into these systems and working through the steps of a proof is an art form that requires much expertise. One must surrender to the preferences and restrictions of the tool regarding how mathematical notions are expressed and what deductions are allowed. Automation is a major driver that forces restrictions. Our focus, on the other hand, is to produce a tool that allows users the ability to con rm proofs that are essentially known already. This goal is valuable in itself. We demonstrate the viability of our approach that allows the user great exibility in expressing state- ments and composing derivations. There were no major obstacles in following a textbook proof of the quantum phase estimation algorithm. There were tedious details of algebraic manipulations that we needed to implement (and a few that we did not have time to enter into our system) and some basic components that we needed to rethink, but there were no serious roadblocks. In the process, we made a number of convenient additions to our Prove-It package that will make certain algebraic manipulations easier to perform in the future. In fact, our intent is for our system to build upon itself in this manner.
On Fitting a Formal Method into Practice
DEFF Research Database (Denmark)
Gmehlich, Rainer; Grau, Katrin; Hallerstede, Stefan
2011-01-01
. The interaction between the two proved to be crucial for the success of the case study. The heart of the problem was tracing informal requirements from Problem Frames descriptions to formal Event-B models. To a large degree, this issue dictated the approach that had to be used for formal modelling. A dedicated...
Formal methods for industrial critical systems a survey of applications
Margaria-Steffen, Tiziana
2012-01-01
"Today, formal methods are widely recognized as an essential step in the design process of industrial safety-critical systems. In its more general definition, the term formal methods encompasses all notations having a precise mathematical semantics, together with their associated analysis methods, that allow description and reasoning about the behavior of a system in a formal manner.Growing out of more than a decade of award-winning collaborative work within the European Research Consortium for Informatics and Mathematics, Formal Methods for Industrial Critical Systems: A Survey of Applications presents a number of mainstream formal methods currently used for designing industrial critical systems, with a focus on model checking. The purpose of the book is threefold: to reduce the effort required to learn formal methods, which has been a major drawback for their industrial dissemination; to help designers to adopt the formal methods which are most appropriate for their systems; and to offer a panel of state-of...
Formal Methods Applications in Air Transportation
Farley, Todd
2009-01-01
The U.S. air transportation system is the most productive in the world, moving far more people and goods than any other. It is also the safest system in the world, thanks in part to its venerable air traffic control system. But as demand for air travel continues to grow, the air traffic control system s aging infrastructure and labor-intensive procedures are impinging on its ability to keep pace with demand. And that impinges on the growth of our economy. Air traffic control modernization has long held the promise of a more efficient air transportation system. Part of NASA s current mission is to develop advanced automation and operational concepts that will expand the capacity of our national airspace system while still maintaining its excellent record for safety. It is a challenging mission, as efforts to modernize have, for decades, been hamstrung by the inability to assure safety to the satisfaction of system operators, system regulators, and/or the traveling public. In this talk, we ll provide a brief history of air traffic control, focusing on the tension between efficiency and safety assurance, and the promise of formal methods going forward.
Formal methods in software development: A road less travelled
Directory of Open Access Journals (Sweden)
John A van der Poll
2010-08-01
Full Text Available An integration of traditional verification techniques and formal specifications in software engineering is presented. Advocates of such techniques claim that mathematical formalisms allow them to produce quality, verifiably correct, or at least highly dependable software and that the testing and maintenance phases are shortened. Critics on the other hand maintain that software formalisms are hard to master, tedious to use and not well suited for the fast turnaround times demanded by industry. In this paper some popular formalisms and the advantages of using these during the early phases of the software development life cycle are presented. Employing the Floyd-Hoare verification principles during the formal specification phase facilitates reasoning about the properties of a specification. Some observations that may help to alleviate the formal-methods controversy are established and a number of formal methods successes is presented. Possible conditions for an increased acceptance of formalisms in oftware development are discussed.
Formal specification level concepts, methods, and algorithms
Soeken, Mathias
2015-01-01
This book introduces a new level of abstraction that closes the gap between the textual specification of embedded systems and the executable model at the Electronic System Level (ESL). Readers will be enabled to operate at this new, Formal Specification Level (FSL), using models which not only allow significant verification tasks in this early stage of the design flow, but also can be extracted semi-automatically from the textual specification in an interactive manner. The authors explain how to use these verification tasks to check conceptual properties, e.g. whether requirements are in conflict, as well as dynamic behavior, in terms of execution traces. • Serves as a single-source reference to a new level of abstraction for embedded systems, known as the Formal Specification Level (FSL); • Provides a variety of use cases which can be adapted to readers’ specific design flows; • Includes a comprehensive illustration of Natural Language Processing (NLP) techniques, along with examples of how to i...
FORMAL METHOD TO IMPLEMENT FUZZY REQUIREMENTS
Directory of Open Access Journals (Sweden)
MARLENE GONCALVES
2012-01-01
Full Text Available RESUMEN: Muchos requerimientos de usuario pueden involucrar criterios de preferencia expresados en el lenguaje natural por medio de términos difusos; éstos son llamados requerimientos difusos. Por otro lado, los lenguajes de consulta a bases de datos han sido extendidos incorporando la lógica difusa para manejar las preferencias de usuarios. Pocas de las metodologías conocidas para el desarrollo de aplicaciones sobre base de datos consideran las consultas difusas. En este trabajo, se propone un método para aplicaciones a bases de datos cuyo objetivo es desarrollar sistemas de software con soporte de consultas difusas. Lo novedoso de éste es la extensión al cálculo de tuplas para la especificación formal de consultas difusas. Además, el método incluye reglas de traducción de una especificación formal a una consulta en SQLf (structured query language + fuzzy logic, un lenguaje de consultas difusas sobre bases de datos precisas. Se ilustra su utilidad con la aplicación a un caso de estudio real.
Formal Methods and Safety Certification: Challenges in the Railways Domain
DEFF Research Database (Denmark)
Fantechi, Alessandro; Ferrari, Alessio; Gnesi, Stefania
2016-01-01
The railway signalling sector has historically been a source of success stories about the adoption of formal methods in the certification of software safety of computer-based control equipment.......The railway signalling sector has historically been a source of success stories about the adoption of formal methods in the certification of software safety of computer-based control equipment....
Moderation instead of modelling: some arguments against formal engineering methods
Rauterberg, G.W.M.; Sikorski, M.; Rauterberg, G.W.M.
1998-01-01
The more formal the used engineering techniques are, the less non-technical facts can be captured. Several business process reengineering and software development projects fail, because the project management concentrates to much on formal methods and modelling approaches. A successful change of
Multiband discrete ordinates method: formalism and results
International Nuclear Information System (INIS)
Luneville, L.
1998-06-01
The multigroup discrete ordinates method is a classical way to solve transport equation (Boltzmann) for neutral particles. Self-shielding effects are not correctly treated due to large variations of cross sections in a group (in the resonance range). To treat the resonance domain, the multiband method is introduced. The main idea is to divide the cross section domain into bands. We obtain the multiband parameters using the moment method; the code CALENDF provides probability tables for these parameters. We present our implementation in an existing discrete ordinates code: SN1D. We study deep penetration benchmarks and show the improvement of the method in the treatment of self-shielding effects. (author)
Formal methods in design and verification of functional specifications
International Nuclear Information System (INIS)
Vaelisuo, H.
1995-01-01
It is claimed that formal methods should be applied already when specifying the functioning of the control/monitoring system, i.e. when planning how to implement the desired operation of the plant. Formal methods are seen as a way to mechanize and thus automate part of the planning. All mathematical methods which can be applied on related problem solving should be considered as formal methods. Because formal methods can only support the designer, not replace him/her, they must be integrated into a design support tool. Such a tool must also aid the designer in getting the correct conception of the plant and its behaviour. The use of a hypothetic design support tool is illustrated to clarify the requirements such a tool should fulfill. (author). 3 refs, 5 figs
FORMED: Bringing Formal Methods to the Engineering Desktop
2016-02-01
FORMED: BRINGING FORMAL METHODS TO THE ENGINEERING DESKTOP BAE SYSTEMS FEBRUARY 2016 FINAL TECHNICAL REPORT APPROVED FOR PUBLIC RELEASE...This report is published in the interest of scientific and technical information exchange, and its publication does not constitute the Government’s...BRINGING FORMAL METHODS TO THE ENGINEERING DESKTOP 5a. CONTRACT NUMBER FA8750-14-C-0024 5b. GRANT NUMBER N/A 5c. PROGRAM ELEMENT NUMBER 63781D
Formalization and Implementation of Algebraic Methods in Geometry
Directory of Open Access Journals (Sweden)
Filip Marić
2012-02-01
Full Text Available We describe our ongoing project of formalization of algebraic methods for geometry theorem proving (Wu's method and the Groebner bases method, their implementation and integration in educational tools. The project includes formal verification of the algebraic methods within Isabelle/HOL proof assistant and development of a new, open-source Java implementation of the algebraic methods. The project should fill-in some gaps still existing in this area (e.g., the lack of formal links between algebraic methods and synthetic geometry and the lack of self-contained implementations of algebraic methods suitable for integration with dynamic geometry tools and should enable new applications of theorem proving in education.
Formal methods for dependable real-time systems
Rushby, John
1993-01-01
The motivation for using formal methods to specify and reason about real time properties is outlined and approaches that were proposed and used are sketched. The formal verifications of clock synchronization algorithms are concluded as showing that mechanically supported reasoning about complex real time behavior is feasible. However, there was significant increase in the effectiveness of verification systems since those verifications were performed, at it is to be expected that verifications of comparable difficulty will become fairly routine. The current challenge lies in developing perspicuous and economical approaches to the formalization and specification of real time properties.
Spacecraft early design validation using formal methods
International Nuclear Information System (INIS)
Bozzano, Marco; Cimatti, Alessandro; Katoen, Joost-Pieter; Katsaros, Panagiotis; Mokos, Konstantinos; Nguyen, Viet Yen; Noll, Thomas; Postma, Bart; Roveri, Marco
2014-01-01
The size and complexity of software in spacecraft is increasing exponentially, and this trend complicates its validation within the context of the overall spacecraft system. Current validation methods are labor-intensive as they rely on manual analysis, review and inspection. For future space missions, we developed – with challenging requirements from the European space industry – a novel modeling language and toolset for a (semi-)automated validation approach. Our modeling language is a dialect of AADL and enables engineers to express the system, the software, and their reliability aspects. The COMPASS toolset utilizes state-of-the-art model checking techniques, both qualitative and probabilistic, for the analysis of requirements related to functional correctness, safety, dependability and performance. Several pilot projects have been performed by industry, with two of them having focused on the system-level of a satellite platform in development. Our efforts resulted in a significant advancement of validating spacecraft designs from several perspectives, using a single integrated system model. The associated technology readiness level increased from level 1 (basic concepts and ideas) to early level 4 (laboratory-tested)
Proceedings of the First NASA Formal Methods Symposium
Denney, Ewen (Editor); Giannakopoulou, Dimitra (Editor); Pasareanu, Corina S. (Editor)
2009-01-01
Topics covered include: Model Checking - My 27-Year Quest to Overcome the State Explosion Problem; Applying Formal Methods to NASA Projects: Transition from Research to Practice; TLA+: Whence, Wherefore, and Whither; Formal Methods Applications in Air Transportation; Theorem Proving in Intel Hardware Design; Building a Formal Model of a Human-Interactive System: Insights into the Integration of Formal Methods and Human Factors Engineering; Model Checking for Autonomic Systems Specified with ASSL; A Game-Theoretic Approach to Branching Time Abstract-Check-Refine Process; Software Model Checking Without Source Code; Generalized Abstract Symbolic Summaries; A Comparative Study of Randomized Constraint Solvers for Random-Symbolic Testing; Component-Oriented Behavior Extraction for Autonomic System Design; Automated Verification of Design Patterns with LePUS3; A Module Language for Typing by Contracts; From Goal-Oriented Requirements to Event-B Specifications; Introduction of Virtualization Technology to Multi-Process Model Checking; Comparing Techniques for Certified Static Analysis; Towards a Framework for Generating Tests to Satisfy Complex Code Coverage in Java Pathfinder; jFuzz: A Concolic Whitebox Fuzzer for Java; Machine-Checkable Timed CSP; Stochastic Formal Correctness of Numerical Algorithms; Deductive Verification of Cryptographic Software; Coloured Petri Net Refinement Specification and Correctness Proof with Coq; Modeling Guidelines for Code Generation in the Railway Signaling Context; Tactical Synthesis Of Efficient Global Search Algorithms; Towards Co-Engineering Communicating Autonomous Cyber-Physical Systems; and Formal Methods for Automated Diagnosis of Autosub 6000.
Dominant partition method. [based on a wave function formalism
Dixon, R. M.; Redish, E. F.
1979-01-01
By use of the L'Huillier, Redish, and Tandy (LRT) wave function formalism, a partially connected method, the dominant partition method (DPM) is developed for obtaining few body reductions of the many body problem in the LRT and Bencze, Redish, and Sloan (BRS) formalisms. The DPM maps the many body problem to a fewer body one by using the criterion that the truncated formalism must be such that consistency with the full Schroedinger equation is preserved. The DPM is based on a class of new forms for the irreducible cluster potential, which is introduced in the LRT formalism. Connectivity is maintained with respect to all partitions containing a given partition, which is referred to as the dominant partition. Degrees of freedom corresponding to the breakup of one or more of the clusters of the dominant partition are treated in a disconnected manner. This approach for simplifying the complicated BRS equations is appropriate for physical problems where a few body reaction mechanism prevails.
Software Components and Formal Methods from a Computational Viewpoint
Lambertz, Christian
2012-01-01
Software components and the methodology of component-based development offer a promising approach to master the design complexity of huge software products because they separate the concerns of software architecture from individual component behavior and allow for reusability of components. In combination with formal methods, the specification of a formal component model of the later software product or system allows for establishing and verifying important system properties in an automatic a...
The importance of training in formal methods in Software Engineering
Directory of Open Access Journals (Sweden)
John Polansky
2014-12-01
Full Text Available The paradigm of formal methods provides systematic techniques and rigorous to software develop and, due the crescent complexity and quality requirements of current products, is necessary introduce them in curriculum of software engineer. In this article is analyzed the importance of train in formal methods and described specific techniques to achieved it efficiently. This techniques are the result of an experimental process in the class room of more than fifteen years in undergraduate and graduate programs, the same as company training. Also are presented a proposal a curriculum to systematic introduction of this paradigm and description of a program in training methods that has been success to industry. Results shows that students gain confidence in formal methods just when found out of the benefits of this in the context of software engineer.
Formal methods for discrete-time dynamical systems
Belta, Calin; Aydin Gol, Ebru
2017-01-01
This book bridges fundamental gaps between control theory and formal methods. Although it focuses on discrete-time linear and piecewise affine systems, it also provides general frameworks for abstraction, analysis, and control of more general models. The book is self-contained, and while some mathematical knowledge is necessary, readers are not expected to have a background in formal methods or control theory. It rigorously defines concepts from formal methods, such as transition systems, temporal logics, model checking and synthesis. It then links these to the infinite state dynamical systems through abstractions that are intuitive and only require basic convex-analysis and control-theory terminology, which is provided in the appendix. Several examples and illustrations help readers understand and visualize the concepts introduced throughout the book.
Formal Methods for Abstract Specifications – A Comparison of Concepts
DEFF Research Database (Denmark)
Instenberg, Martin; Schneider, Axel; Schnetter, Sabine
2006-01-01
In industry formal methods are becoming increasingly important for the verification of hardware and software designs. However current practice for specification of system and protocol functionality on high level of abstraction is textual description. For verification of the system behavior manual...... inspections and tests are usual means. To facilitate the introduction of formal methods in the development process of complex systems and protocols, two different tools evolved from research activities – UPPAAL and SpecEdit – have been investigated and compared regarding their concepts and functionality...
Tretmans, G.J.; Wijbrans, K.C.J.; Chaudron, M.
2001-01-01
This paper discusses the use of formal methods in the development of the control system for the Maeslant Kering. The Maeslant Kering is the movable dam which has to protect Rotterdam from floodings while, at (almost) the same time, not restricting ship traffic to the port of Rotterdam. The control
A Survey of Formal Methods for Intelligent Swarms
Truszkowski, Walt; Rash, James; Hinchey, Mike; Rouff, Chrustopher A.
2004-01-01
cutting edge in system correctness, and requires higher levels of assurance than other (traditional) missions that use a single or small number of spacecraft that are deterministic in nature and have near continuous communication access. One of the highest possible levels of assurance comes from the application of formal methods. Formal methods are mathematics-based tools and techniques for specifying and verifying (software and hardware) systems. They are particularly useful for specifying complex parallel systems, such as exemplified by the ANTS mission, where the entire system is difficult for a single person to fully understand, a problem that is multiplied with multiple developers. Once written, a formal specification can be used to prove properties of a system (e.g., the underlying system will go from one state to another or not into a specific state) and check for particular types of errors (e.g., race or livelock conditions). A formal specification can also be used as input to a model checker for further validation. This report gives the results of a survey of formal methods techniques for verification and validation of space missions that use swarm technology. Multiple formal methods were evaluated to determine their effectiveness in modeling and assuring the behavior of swarms of spacecraft using the ANTS mission as an example system. This report is the first result of the project to determine formal approaches that are promising for formally specifying swarm-based systems. From this survey, the most promising approaches were selected and are discussed relative to their possible application to the ANTS mission. Future work will include the application of an integrated approach, based on the selected approaches identified in this report, to the formal specification of the ANTS mission.
Formal methods applied to industrial complex systems implementation of the B method
Boulanger, Jean-Louis
2014-01-01
This book presents real-world examples of formal techniques in an industrial context. It covers formal methods such as SCADE and/or the B Method, in various fields such as railways, aeronautics, and the automotive industry. The purpose of this book is to present a summary of experience on the use of "formal methods" (based on formal techniques such as proof, abstract interpretation and model-checking) in industrial examples of complex systems, based on the experience of people currently involved in the creation and assessment of safety critical system software. The involvement of people from
What is the method in applying formal methods to PLC applications?
Mader, Angelika H.; Engel, S.; Wupper, Hanno; Kowalewski, S.; Zaytoon, J.
2000-01-01
The question we investigate is how to obtain PLC applications with confidence in their proper functioning. Especially, we are interested in the contribution that formal methods can provide for their development. Our maxim is that the place of a particular formal method in the total picture of system
Formal methods in the design of Ada 1995
Guaspari, David
1995-01-01
Formal, mathematical methods are most useful when applied early in the design and implementation of a software system--that, at least, is the familiar refrain. I will report on a modest effort to apply formal methods at the earliest possible stage, namely, in the design of the Ada 95 programming language itself. This talk is an 'experience report' that provides brief case studies illustrating the kinds of problems we worked on, how we approached them, and the extent (if any) to which the results proved useful. It also derives some lessons and suggestions for those undertaking future projects of this kind. Ada 95 is the first revision of the standard for the Ada programming language. The revision began in 1988, when the Ada Joint Programming Office first asked the Ada Board to recommend a plan for revising the Ada standard. The first step in the revision was to solicit criticisms of Ada 83. A set of requirements for the new language standard, based on those criticisms, was published in 1990. A small design team, the Mapping Revision Team (MRT), became exclusively responsible for revising the language standard to satisfy those requirements. The MRT, from Intermetrics, is led by S. Tucker Taft. The work of the MRT was regularly subject to independent review and criticism by a committee of distinguished Reviewers and by several advisory teams--for example, the two User/Implementor teams, each consisting of an industrial user (attempting to make significant use of the new language on a realistic application) and a compiler vendor (undertaking, experimentally, to modify its current implementation in order to provide the necessary new features). One novel decision established the Language Precision Team (LPT), which investigated language proposals from a mathematical point of view. The LPT applied formal mathematical analysis to help improve the design of Ada 95 (e.g., by clarifying the language proposals) and to help promote its acceptance (e.g., by identifying a
The HACMS program: using formal methods to eliminate exploitable bugs.
Fisher, Kathleen; Launchbury, John; Richards, Raymond
2017-10-13
For decades, formal methods have offered the promise of verified software that does not have exploitable bugs. Until recently, however, it has not been possible to verify software of sufficient complexity to be useful. Recently, that situation has changed. SeL4 is an open-source operating system microkernel efficient enough to be used in a wide range of practical applications. Its designers proved it to be fully functionally correct, ensuring the absence of buffer overflows, null pointer exceptions, use-after-free errors, etc., and guaranteeing integrity and confidentiality. The CompCert Verifying C Compiler maps source C programs to provably equivalent assembly language, ensuring the absence of exploitable bugs in the compiler. A number of factors have enabled this revolution, including faster processors, increased automation, more extensive infrastructure, specialized logics and the decision to co-develop code and correctness proofs rather than verify existing artefacts. In this paper, we explore the promise and limitations of current formal-methods techniques. We discuss these issues in the context of DARPA's HACMS program, which had as its goal the creation of high-assurance software for vehicles, including quadcopters, helicopters and automobiles.This article is part of the themed issue 'Verified trustworthy software systems'. © 2017 The Authors.
The HACMS program: using formal methods to eliminate exploitable bugs
Launchbury, John; Richards, Raymond
2017-01-01
For decades, formal methods have offered the promise of verified software that does not have exploitable bugs. Until recently, however, it has not been possible to verify software of sufficient complexity to be useful. Recently, that situation has changed. SeL4 is an open-source operating system microkernel efficient enough to be used in a wide range of practical applications. Its designers proved it to be fully functionally correct, ensuring the absence of buffer overflows, null pointer exceptions, use-after-free errors, etc., and guaranteeing integrity and confidentiality. The CompCert Verifying C Compiler maps source C programs to provably equivalent assembly language, ensuring the absence of exploitable bugs in the compiler. A number of factors have enabled this revolution, including faster processors, increased automation, more extensive infrastructure, specialized logics and the decision to co-develop code and correctness proofs rather than verify existing artefacts. In this paper, we explore the promise and limitations of current formal-methods techniques. We discuss these issues in the context of DARPA’s HACMS program, which had as its goal the creation of high-assurance software for vehicles, including quadcopters, helicopters and automobiles. This article is part of the themed issue ‘Verified trustworthy software systems’. PMID:28871050
A Formal Verification Method of Function Block Diagram
International Nuclear Information System (INIS)
Koh, Kwang Yong; Seong, Poong Hyun; Jee, Eun Kyoung; Jeon, Seung Jae; Park, Gee Yong; Kwon, Kee Choon
2007-01-01
Programmable Logic Controller (PLC), an industrial computer specialized for real-time applications, is widely used in diverse control systems in chemical processing plants, nuclear power plants or traffic control systems. As a PLC is often used to implement safety, critical embedded software, rigorous safety demonstration of PLC code is necessary. Function block diagram (FBD) is a standard application programming language for the PLC and currently being used in the development of a fully-digitalized reactor protection system (RPS), which is called the IDiPS, under the KNICS project. Therefore, verification issue of FBD programs is a pressing problem, and hence is of great importance. In this paper, we propose a formal verification method of FBD programs; we defined FBD programs formally in compliance with IEC 61131-3, and then translate the programs into Verilog model, and finally the model is verified using a model checker SMV. To demonstrate the feasibility and effective of this approach, we applied it to IDiPS which currently being developed under KNICS project. The remainder of this paper is organized as follows. Section 2 briefly describes Verilog and Cadence SMV. In Section 3, we introduce FBD2V which is a tool implemented to support the proposed FBD verification framework. A summary and conclusion are provided in Section 4
Enabling Advanced Wind-Tunnel Research Methods Using the NASA Langley 12-Foot Low Speed Tunnel
Busan, Ronald C.; Rothhaar, Paul M.; Croom, Mark A.; Murphy, Patrick C.; Grafton, Sue B.; O-Neal, Anthony W.
2014-01-01
Design of Experiment (DOE) testing methods were used to gather wind tunnel data characterizing the aerodynamic and propulsion forces and moments acting on a complex vehicle configuration with 10 motor-driven propellers, 9 control surfaces, a tilt wing, and a tilt tail. This paper describes the potential benefits and practical implications of using DOE methods for wind tunnel testing - with an emphasis on describing how it can affect model hardware, facility hardware, and software for control and data acquisition. With up to 23 independent variables (19 model and 2 tunnel) for some vehicle configurations, this recent test also provides an excellent example of using DOE methods to assess critical coupling effects in a reasonable timeframe for complex vehicle configurations. Results for an exploratory test using conventional angle of attack sweeps to assess aerodynamic hysteresis is summarized, and DOE results are presented for an exploratory test used to set the data sampling time for the overall test. DOE results are also shown for one production test characterizing normal force in the Cruise mode for the vehicle.
Computer Science Research at Langley
Voigt, S. J. (Editor)
1982-01-01
A workshop was held at Langley Research Center, November 2-5, 1981, to highlight ongoing computer science research at Langley and to identify additional areas of research based upon the computer user requirements. A panel discussion was held in each of nine application areas, and these are summarized in the proceedings. Slides presented by the invited speakers are also included. A survey of scientific, business, data reduction, and microprocessor computer users helped identify areas of focus for the workshop. Several areas of computer science which are of most concern to the Langley computer users were identified during the workshop discussions. These include graphics, distributed processing, programmer support systems and tools, database management, and numerical methods.
Methods for converging correlation energies within the dielectric matrix formalism
Dixit, Anant; Claudot, Julien; Gould, Tim; Lebègue, Sébastien; Rocca, Dario
2018-03-01
Within the dielectric matrix formalism, the random-phase approximation (RPA) and analogous methods that include exchange effects are promising approaches to overcome some of the limitations of traditional density functional theory approximations. The RPA-type methods however have a significantly higher computational cost, and, similarly to correlated quantum-chemical methods, are characterized by a slow basis set convergence. In this work we analyzed two different schemes to converge the correlation energy, one based on a more traditional complete basis set extrapolation and one that converges energy differences by accounting for the size-consistency property. These two approaches have been systematically tested on the A24 test set, for six points on the potential-energy surface of the methane-formaldehyde complex, and for reaction energies involving the breaking and formation of covalent bonds. While both methods converge to similar results at similar rates, the computation of size-consistent energy differences has the advantage of not relying on the choice of a specific extrapolation model.
Kaliszyk, C.; Urban, J.; Vyskocil, J.; Geuvers, J.H.; Watt, S.M.; Davenport, J.H.; Sexton, A.P.; Sojka, P.; Urban, J.
2014-01-01
The goal of this project is to (i) accumulate annotated informal/formal mathematical corpora suitable for training semi-automated translation between informal and formal mathematics by statistical machine-translation methods, (ii) to develop such methods oriented at the formalization task, and in
Digital system verification a combined formal methods and simulation framework
Li, Lun
2010-01-01
Integrated circuit capacity follows Moore's law, and chips are commonly produced at the time of this writing with over 70 million gates per device. Ensuring correct functional behavior of such large designs before fabrication poses an extremely challenging problem. Formal verification validates the correctness of the implementation of a design with respect to its specification through mathematical proof techniques. Formal techniques have been emerging as commercialized EDA tools in the past decade. Simulation remains a predominantly used tool to validate a design in industry. After more than 5
Recent trends related to the use of formal methods in software engineering
Prehn, Soren
1986-01-01
An account is given of some recent developments and trends related to the development and use of formal methods in software engineering. Ongoing activities in Europe are focussed on, since there seems to be a notable difference in attitude towards industrial usage of formal methods in Europe and in the U.S. A more detailed account is given of the currently most widespread formal method in Europe: the Vienna Development Method. Finally, the use of Ada is discussed in relation to the application of formal methods, and the potential for constructing Ada-specific tools based on that method is considered.
A comparative study of formal methods for safety critical software in nuclear power plant
International Nuclear Information System (INIS)
Sohn, Se Do; Seong Poong Hyun
2000-01-01
The requirement of ultra high reliability of the safety critical software can not be demonstrated by testing alone. The specification based on formal method is recommended for safety system software. But there exist various kinds of formal methods, and this variety of formal method is recognized as an obstacle to the wide use of formal method. In this paper six different formal method have been applied to the same part of the functional requirements that is calculation algorithm intensive. The specification results were compared against the criteria that is derived from the characteristics that good software requirements specifications should have and regulatory body recommends to have. The application experience shows that the critical characteristics should be defined first, then appropriate method has to e selected. In our case, the Software Cost Reduction method was recommended for internal condition or calculation algorithm checking, and state chart method is recommended for the external behavioral description. (author)
Higher order temporal finite element methods through mixed formalisms.
Kim, Jinkyu
2014-01-01
The extended framework of Hamilton's principle and the mixed convolved action principle provide new rigorous weak variational formalism for a broad range of initial boundary value problems in mathematical physics and mechanics. In this paper, their potential when adopting temporally higher order approximations is investigated. The classical single-degree-of-freedom dynamical systems are primarily considered to validate and to investigate the performance of the numerical algorithms developed from both formulations. For the undamped system, all the algorithms are symplectic and unconditionally stable with respect to the time step. For the damped system, they are shown to be accurate with good convergence characteristics.
On the Application of Formal Methods to Clinical Guidelines, an Artificial Intelligence Perspective
Hommersom, A.J.
2008-01-01
In computer science, all kinds of methods and techniques have been developed to study systems, such as simulation of the behaviour of a system. Furthermore, it is possible to study these systems by proving formal formal properties or by searching through all the possible states that a system may be
A Mixed Methods Study of Barriers to Formal Diagnosis of Autism Spectrum Disorder in Adults
Lewis, Laura Foran
2017-01-01
Delayed diagnosis of autism spectrum disorder (ASD) into adulthood is common, and self-diagnosis is a growing phenomenon. This mixed methods study aimed to explore barriers to formal diagnosis of ASD in adults. In a qualitative strand, secondary analysis of data on the experiences of 114 individuals who were self-diagnosed or formally diagnosed…
Method of ATMS operators in the formalism of Faddeev equations
International Nuclear Information System (INIS)
Zubarev, D.A.
1991-01-01
The method of ATMS operators is generalized for the case of Faddeev equations. The method to construct effective equations for both elastic scattering and scattering with rearrangement is presented. Properties to obtained equations are considered
Industrial applications of formal methods to model, design and analyze computer systems
Craigen, Dan
1995-01-01
Formal methods are mathematically-based techniques, often supported by reasoning tools, that can offer a rigorous and effective way to model, design and analyze computer systems. The purpose of this study is to evaluate international industrial experience in using formal methods. The cases selected are representative of industrial-grade projects and span a variety of application domains. The study had three main objectives: · To better inform deliberations within industry and government on standards and regulations; · To provide an authoritative record on the practical experience of formal m
Practice-Oriented Formal Methods to Support the Software Development of Industrial Control Systems
AUTHOR|(CDS)2088632; Blanco Viñuela, Enrique
Formal specification and verification methods provide ways to describe requirements precisely and to check whether the requirements are satisfied by the design or the implementation. In other words, they can prevent development faults and therefore improve the quality of the developed systems. These methods are part of the state-of-the-practice in application domains with high criticality, such as avionics, railway or nuclear industry. The situation is different in the industrial control systems domain. As the criticality of the systems is much lower, formal methods are rarely used. The two main obstacles to using formal methods in systems with low- or medium-criticality are performance and usability. Overcoming these obstacles often needs deep knowledge and high effort. Model checking, one of the main formal verification techniques, is computationally difficult, therefore the analysis of non-trivial systems requires special considerations. Furthermore, the mainly academic tools implementing different model c...
An Introduction to Formal Methods for the Development of Safety-critical Applications
DEFF Research Database (Denmark)
Haxthausen, Anne Elisabeth
2010-01-01
This report is a delivery to The Danish Government’s railway authority, Traﬁkstyrelsen, as a part of the Public Sector Consultancy service oﬀered by the Technical University of Denmark. The purpose of the report is to give the reader an insight into the stateof-the-art of formal methods. The reader...... is assumed to have some knowledge about software development, but not on formal methods. The background for the railway authorities’ interest in formal methods is the fact that during the next decade a total renewal of the Danish signalling infrastructure is going to take place. Central parts of the new...... systems will be software components that must fulﬁll strong safety requirements: in order to get the software certiﬁed at the highest Safety Integrity Levels of the European CENELEC standards for railway applications, the software providers are expected to use formal methods....
The relationship between the Wigner-Weyl kinetic formalism and the complex geometrical optics method
Maj, Omar
2004-01-01
The relationship between two different asymptotic techniques developed in order to describe the propagation of waves beyond the standard geometrical optics approximation, namely, the Wigner-Weyl kinetic formalism and the complex geometrical optics method, is addressed. More specifically, a solution of the wave kinetic equation, relevant to the Wigner-Weyl formalism, is obtained which yields the same wavefield intensity as the complex geometrical optics method. Such a relationship is also disc...
A survey of formal methods for determining functional joint axes.
Ehrig, Rainald M; Taylor, William R; Duda, Georg N; Heller, Markus O
2007-01-01
Axes of rotation e.g. at the knee, are often generated from clinical gait analysis data to be used in the assessment of kinematic abnormalities, the diagnosis of disease, or the ongoing monitoring of a patient's condition. They are additionally used in musculoskeletal models to aid in the description of joint and segment kinematics for patient specific analyses. Currently available methods to describe joint axes from segment marker positions share the problem that when one segment is transformed into the coordinate system of another, artefacts associated with motion of the markers relative to the bone can become magnified. In an attempt to address this problem, a symmetrical axis of rotation approach (SARA) is presented here to determine a unique axis of rotation that can consider the movement of two dynamic body segments simultaneously, and then compared its performance in a survey against a number of previously proposed techniques. Using a generated virtual joint, with superimposed marker error conditions to represent skin movement artefacts, fitting methods (geometric axis fit, cylinder axis fit, algebraic axis fit) and transformation techniques (axis transformation technique, mean helical axis, Schwartz approach) were classified and compared with the SARA. Nearly all approaches were able to estimate the axis of rotation to within an RMS error of 0.1cm at large ranges of motion (90 degrees ). Although the geometric axis fit produced the least RMS error of approximately 1.2 cm at lower ranges of motion (5 degrees ) with a stationary axis, the SARA and Axis Transformation Technique outperformed all other approaches under the most demanding marker artefact conditions for all ranges of motion. The cylinder and algebraic axis fit approaches were unable to compute competitive AoR estimates. Whilst these initial results using the SARA are promising and are fast enough to be determined "on-line", the technique must now be proven in a clinical environment.
1993-01-01
NASA Langley recognizes the importance of healthy employees by committing itself to offering a complete fitness program. The scope of the program focuses on promoting overall health and wellness in an effort to reduce the risks of illness and disease and to increase productivity. This is accomplished through a comprehensive Health and Fitness Program offered to all NASA employees. Various aspects of the program are discussed.
Formal Solutions for Polarized Radiative Transfer. II. High-order Methods
Energy Technology Data Exchange (ETDEWEB)
Janett, Gioele; Steiner, Oskar; Belluzzi, Luca, E-mail: gioele.janett@irsol.ch [Istituto Ricerche Solari Locarno (IRSOL), 6605 Locarno-Monti (Switzerland)
2017-08-20
When integrating the radiative transfer equation for polarized light, the necessity of high-order numerical methods is well known. In fact, well-performing high-order formal solvers enable higher accuracy and the use of coarser spatial grids. Aiming to provide a clear comparison between formal solvers, this work presents different high-order numerical schemes and applies the systematic analysis proposed by Janett et al., emphasizing their advantages and drawbacks in terms of order of accuracy, stability, and computational cost.
Applying formal method to design of nuclear power plant embedded protection system
International Nuclear Information System (INIS)
Kim, Jin Hyun; Kim, Il Gon; Sung, Chang Hoon; Choi, Jin Young; Lee, Na Young
2001-01-01
Nuclear power embedded protection systems is a typical safety-critical system, which detects its failure and shutdowns its operation of nuclear reactor. These systems are very dangerous so that it absolutely requires safety and reliability. Therefore nuclear power embedded protection system should fulfill verification and validation completely from the design stage. To develop embedded system, various V and V method have been provided and especially its design using Formal Method is studied in other advanced country. In this paper, we introduce design method of nuclear power embedded protection systems using various Formal-Method in various respect following nuclear power plant software development guideline
Analysis of Formal Methods for Specification of E-Commerce Applications
Directory of Open Access Journals (Sweden)
Sadiq Ali Khan
2016-01-01
Full Text Available E-commerce based application characteristics portray elevated dynamics while incorporating decentralized nature. Extreme emphasis influencing structural design plus implementation, positions such applications highly appreciated. Significant research articles reveal that, applying formal methods addressing challenges incumbent with E-commerce based applications, contribute towards reliability and robustness obliging the system. Anticipating and designing sturdy e-process and concurrent implementation, allows application behavior extra strength against errors, frauds and hacking, minimizing program faults during application operations. Programmers find extreme difficulty guaranteeing correct processing under all circumstances, however, not impossible. Concealed flaws and errors, triggered only under unexpected and unanticipated scenarios, pilot subtle mistakes and appalling failures. Code authors utilize various formal methods for reducing these flaws. Mentioning prominent methods would include, ASM (Abstract State Machines, B-Method, z-Language, UML (Unified Modelling Language etc. This paper primarily focuses different formal methods applied while deliberating specification and verification techniques for cost effective.
An Entry Point for Formal Methods: Specification and Analysis of Event Logs
Directory of Open Access Journals (Sweden)
Howard Barringer
2010-03-01
Full Text Available Formal specification languages have long languished, due to the grave scalability problems faced by complete verification methods. Runtime verification promises to use formal specifications to automate part of the more scalable art of testing, but has not been widely applied to real systems, and often falters due to the cost and complexity of instrumentation for online monitoring. In this paper we discuss work in progress to apply an event-based specification system to the logging mechanism of the Mars Science Laboratory mission at JPL. By focusing on log analysis, we exploit the "instrumentation" already implemented and required for communicating with the spacecraft. We argue that this work both shows a practical method for using formal specifications in testing and opens interesting research avenues, including a challenging specification learning problem.
Scientific and technical information output of the Langley Research Center
1984-01-01
Scientific and technical information that the Langley Research Center produced during the calendar year 1983 is compiled. Included are citations for Formal Reports, Quick-Release Technical Memorandums, Contractor Reports, Journal Articles and other Publications, Meeting Presentations, Technical Talks, Computer Programs, Tech Briefs, and Patents.
Preliminary Proceedings First International Workshop on Formal Methods for WirelessSystems
DEFF Research Database (Denmark)
The FMWS workshops aim at bringing together researchers interested in formal methods for wireless systems, more specifically in theories for semantics, logics, and verification techniques for wireless systems. Wireless systems are rapidly increasing their success in real-world applications while...
Application of path integral method to heavy ion reactions, 1. General formalism
Energy Technology Data Exchange (ETDEWEB)
Fujita, J; Negishi, T [Tokyo Univ. of Education (Japan). Dept. of Physics
1976-03-01
The semiclassical approach for heavy ion reactions has become more and more important in analyzing rapidly accumulating data. The purpose of this paper is to lay a quantum-mechanical foundation of the conventional semiclassical treatments in heavy ion physics by using Feynman's path integral method on the basis of the second paper of Pechukas, and discuss simple consequences of the formalism.
Discrete mathematics, formal methods, the Z schema and the software life cycle
Bown, Rodney L.
1991-01-01
The proper role and scope for the use of discrete mathematics and formal methods in support of engineering the security and integrity of components within deployed computer systems are discussed. It is proposed that the Z schema can be used as the specification language to capture the precise definition of system and component interfaces. This can be accomplished with an object oriented development paradigm.
Bolton, Matthew L.; Bass, Ellen J.
2009-01-01
Both the human factors engineering (HFE) and formal methods communities are concerned with finding and eliminating problems with safety-critical systems. This work discusses a modeling effort that leveraged methods from both fields to use model checking with HFE practices to perform formal verification of a human-interactive system. Despite the use of a seemingly simple target system, a patient controlled analgesia pump, the initial model proved to be difficult for the model checker to verify in a reasonable amount of time. This resulted in a number of model revisions that affected the HFE architectural, representativeness, and understandability goals of the effort. If formal methods are to meet the needs of the HFE community, additional modeling tools and technological developments are necessary.
Formal Methods in Air Traffic Management: The Case of Unmanned Aircraft Systems
Munoz, Cesar A.
2015-01-01
As the technological and operational capabilities of unmanned aircraft systems (UAS) continue to grow, so too does the need to introduce these systems into civil airspace. Unmanned Aircraft Systems Integration in the National Airspace System is a NASA research project that addresses the integration of civil UAS into non-segregated airspace operations. One of the major challenges of this integration is the lack of an onboard pilot to comply with the legal requirement that pilots see and avoid other aircraft. The need to provide an equivalent to this requirement for UAS has motivated the development of a detect and avoid (DAA) capability to provide the appropriate situational awareness and maneuver guidance in avoiding and remaining well clear of traffic aircraft. Formal methods has played a fundamental role in the development of this capability. This talk reports on the formal methods work conducted under NASA's Safe Autonomous System Operations project in support of the development of DAA for UAS. This work includes specification of low-level and high-level functional requirements, formal verification of algorithms, and rigorous validation of software implementations. The talk also discusses technical challenges in formal methods research in the context of the development and safety analysis of advanced air traffic management concepts.
A self-consistent nodal method in response matrix formalism for the multigroup diffusion equations
International Nuclear Information System (INIS)
Malambu, E.M.; Mund, E.H.
1996-01-01
We develop a nodal method for the multigroup diffusion equations, based on the transverse integration procedure (TIP). The efficiency of the method rests upon the convergence properties of a high-order multidimensional nodal expansion and upon numerical implementation aspects. The discrete 1D equations are cast in response matrix formalism. The derivation of the transverse leakage moments is self-consistent i.e. does not require additional assumptions. An outstanding feature of the method lies in the linear spatial shape of the local transverse leakage for the first-order scheme. The method is described in the two-dimensional case. The method is validated on some classical benchmark problems. (author)
Bernardo, M.; Vink, de E.P.; Di Pierro, A.; Wiklicky, H.
2013-01-01
Preface. This volume presents a set of papers accompanying the lectures of the 13th International School on Formal Methods for the Design of Computer, Communication, and Software Systems (SFM). This series of schools addresses the use of formal methods in computer science as a prominent approach to
Perturbative method for the derivation of quantum kinetic theory based on closed-time-path formalism
International Nuclear Information System (INIS)
Koide, Jun
2002-01-01
Within the closed-time-path formalism, a perturbative method is presented, which reduces the microscopic field theory to the quantum kinetic theory. In order to make this reduction, the expectation value of a physical quantity must be calculated under the condition that the Wigner distribution function is fixed, because it is the independent dynamical variable in the quantum kinetic theory. It is shown that when a nonequilibrium Green function in the form of the generalized Kadanoff-Baym ansatz is utilized, this condition appears as a cancellation of a certain part of contributions in the diagrammatic expression of the expectation value. Together with the quantum kinetic equation, which can be derived in the closed-time-path formalism, this method provides a basis for the kinetic-theoretical description
International Nuclear Information System (INIS)
Edgar, S.B.
1990-01-01
The structures of the N.P. and G.H.P formalisms are reviewed in order to understand and demonstrate the important role played by the commutator equations in the associated integration procedures. Particular attention is focused on how the commutator equations are to be satisfied, or checked for consistency. It is shown that Held's integration method will only guarantee genuine solutions of Einstein's equations when all the commutator equations are correctly and completely satisfied. (authors)
Directory of Open Access Journals (Sweden)
Emma Emanuilova Yandybaeva
2015-03-01
Full Text Available The methods of information subjects and objects interaction rules formalization in the electronic trading platform system has been developed. They are based on mathematical model of mandatory role-based access control. As a result of the work we have defined set of user roles and constructed roles hierarchy. For the roles hierarchy restrictions have been imposed to ensure the safety of the information system.
Formal methods and their applicability in the development of safety critical software systems
International Nuclear Information System (INIS)
Sievertsen, T.
1995-01-01
The OECD Halden Reactor Project has for a number of years been involved in the development and application of a formal software specification and development method based on algebraic specification and the HRP Prover. In parallel to this activity the Project has been evaluating and comparing different methods and approaches to formal software development by their application on realistic case examples. Recent work has demonstrated that algebraic specification and the HRP Prover can be used both in the specification and design of a software system, even down to a concrete model which can be translated into the chosen implementation language. The HRP Prover is currently being used in a case study on the applicability of the methodology in the development of a power range monitoring system for a nuclear power plant. The presentation reviews some of the experiences drawn from the Project's research activities in this area, with special emphasis on questions relating to applicability and limitations, and the role of formal methods in the development of safety-critical software systems. (14 refs., 1 fig.)
Efficient formalism for treating tapered structures using the Fourier modal method
DEFF Research Database (Denmark)
Østerkryger, Andreas Dyhl; Gregersen, Niels
2016-01-01
We investigate the development of the mode occupations in tapered structures using the Fourier modal method. In order to use the Fourier modal method, tapered structures are divided into layers of uniform refractive index in the propagation direction and the optical modes are found within each...... layer. This is not very efficient and in this proceeding we take the first steps towards a more efficient formalism for treating tapered structures using the Fourier modal method. We show that the coupling coefficients through the structure are slowly varying and that only the first few modes...
Andova, S.; McIver, A.; D'Argenio, P.R.; Cuijpers, P.J.L.; Markovski, J.; Morgan, C.; Núñez, M.
2009-01-01
This volume contains the papers presented at the 1st workshop on Quantitative Formal Methods: Theory and Applications, which was held in Eindhoven on 3 November 2009 as part of the International Symposium on Formal Methods 2009. This volume contains the final versions of all contributions accepted
Formalization of the Access Control on ARM-Android Platform with the B Method
Ren, Lu; Wang, Wei; Zhu, Xiaodong; Man, Yujia; Yin, Qing
2018-01-01
ARM-Android is a widespread mobile platform with multi-layer access control mechanisms, security-critical in the system. Many access control vulnerabilities still exist due to the course-grained policy and numerous engineering defects, which have been widely studied. However, few researches focus on the mechanism formalization, including the Android permission framework, kernel process management and hardware isolation. This paper first develops a comprehensive formal access control model on the ARM-Android platform using the B method, from the Android middleware to hardware layer. All the model specifications are type checked and proved to be well-defined, with 75%of proof obligations demonstrated automatically. The results show that the proposed B model is feasible to specify and verify access control schemes in the ARM-Android system, and capable of implementing a practical control module.
DEFF Research Database (Denmark)
Masses of Formal Philosophy is an outgrowth of Formal Philosophy. That book gathered the responses of some of the most prominent formal philosophers to five relatively open and broad questions initiating a discussion of metaphilosophical themes and problems surrounding the use of formal methods i...... in philosophy. Including contributions from a wide range of philosophers, Masses of Formal Philosophy contains important new responses to the original five questions.......Masses of Formal Philosophy is an outgrowth of Formal Philosophy. That book gathered the responses of some of the most prominent formal philosophers to five relatively open and broad questions initiating a discussion of metaphilosophical themes and problems surrounding the use of formal methods...
Software Safety Analysis of Digital Protection System Requirements Using a Qualitative Formal Method
International Nuclear Information System (INIS)
Lee, Jang-Soo; Kwon, Kee-Choon; Cha, Sung-Deok
2004-01-01
The safety analysis of requirements is a key problem area in the development of software for the digital protection systems of a nuclear power plant. When specifying requirements for software of the digital protection systems and conducting safety analysis, engineers find that requirements are often known only in qualitative terms and that existing fault-tree analysis techniques provide little guidance on formulating and evaluating potential failure modes. A framework for the requirements engineering process is proposed that consists of a qualitative method for requirements specification, called the qualitative formal method (QFM), and a safety analysis method for the requirements based on causality information, called the causal requirements safety analysis (CRSA). CRSA is a technique that qualitatively evaluates causal relationships between software faults and physical hazards. This technique, extending the qualitative formal method process and utilizing information captured in the state trajectory, provides specific guidelines on how to identify failure modes and the relationship among them. The QFM and CRSA processes are described using shutdown system 2 of the Wolsong nuclear power plants as the digital protection system example
Method of resonating groups in the Faddeev-Hahn equation formalism for three-body nuclear problem
Nasirov, M Z
2002-01-01
The Faddeev-Hahn equation formalism for three-body nuclear problem is considered. For solution of the equations the method of resonant groups have applied. The calculations of tritium binding energy and doublet nd-scattering length have been carried out. The results obtained shows that Faddeev-Hahn equation formalism is very simple and effective. (author)
Using CASE-tools based on formal methods in real-life system development of distributed systems
International Nuclear Information System (INIS)
Stoelen, Ketil; Karlsen, Tore Willy; Mohn, Peter; Sandmark, Haaakon
1998-03-01
Within the OECD Halden Reactor Project (HRP) the development and application of formal methods to enhance system quality have been prioritised tasks for the last three years per periods. The three year programme 1997-1999 identifies the need to gain experience from applying formal methods in larger real-life system developments. This motivated the initiation of the HRP research activity Integration of Formal Specification in the Development of HAMMLAB 2000 (INT-FS). The principal objective of INT-FS is to experiment with formal methods in system developments connected to HAMMLAB 2000 and thereby gain a better understanding of their suitability to support practical software engineering. In particular, INT-FS will try to measure the effect of formal methods and gain experience in combining formal methods with traditional development techniques. INT-FS was started up in January 1997. This report describes the status of INT-FS by February 1998. The report identifies objectives and plans; it motivates the choice of formal methods, CASE-tool and software process; it motivates and defines metrics for measuring achievement and the effect of formalization. The report also provides preliminary results from an experimental development of a communication manager; it describes the component to be developed and the background of the participants; it offers some provisional statistics and summarises the experiences with methods and tools. The development of the communication manager is the first attempt ever to exploit state-of-the-art CASE-tools for formal methods in practical software engineering at the HRP. (author)
A Method for Capturing and Reconciling Stakeholder Intentions Based on the Formal Concept Analysis
Aoyama, Mikio
Information systems are ubiquitous in our daily life. Thus, information systems need to work appropriately anywhere at any time for everybody. Conventional information systems engineering tends to engineer systems from the viewpoint of systems functionality. However, the diversity of the usage context requires fundamental change compared to our current thinking on information systems; from the functionality the systems provide to the goals the systems should achieve. The intentional approach embraces the goals and related aspects of the information systems. This chapter presents a method for capturing, structuring and reconciling diverse goals of multiple stakeholders. The heart of the method lies in the hierarchical structuring of goals by goal lattice based on the formal concept analysis, a semantic extension of the lattice theory. We illustrate the effectiveness of the presented method through application to the self-checkout systems for large-scale supermarkets.
Fault tree construction of hybrid system requirements using qualitative formal method
International Nuclear Information System (INIS)
Lee, Jang-Soo; Cha, Sung-Deok
2005-01-01
When specifying requirements for software controlling hybrid systems and conducting safety analysis, engineers experience that requirements are often known only in qualitative terms and that existing fault tree analysis techniques provide little guidance on formulating and evaluating potential failure modes. In this paper, we propose Causal Requirements Safety Analysis (CRSA) as a technique to qualitatively evaluate causal relationship between software faults and physical hazards. This technique, extending qualitative formal method process and utilizing information captured in the state trajectory, provides specific guidelines on how to identify failure modes and relationship among them. Using a simplified electrical power system as an example, we describe step-by-step procedures of conducting CRSA. Our experience of applying CRSA to perform fault tree analysis on requirements for the Wolsong nuclear power plant shutdown system indicates that CRSA is an effective technique in assisting safety engineers
Implementation of a method for calculating temperature-dependent resistivities in the KKR formalism
Mahr, Carsten E.; Czerner, Michael; Heiliger, Christian
2017-10-01
We present a method to calculate the electron-phonon induced resistivity of metals in scattering-time approximation based on the nonequilibrium Green's function formalism. The general theory as well as its implementation in a density-functional theory based Korringa-Kohn-Rostoker code are described and subsequently verified by studying copper as a test system. We model the thermal expansion by fitting a Debye-Grüneisen curve to experimental data. Both the electronic and vibrational structures are discussed for different temperatures, and employing a Wannier interpolation of these quantities we evaluate the scattering time by integrating the electron linewidth on a triangulation of the Fermi surface. Based thereupon, the temperature-dependent resistivity is calculated and found to be in good agreement with experiment. We show that the effect of thermal expansion has to be considered in the whole calculation regime. Further, for low temperatures, an accurate sampling of the Fermi surface becomes important.
Energy Technology Data Exchange (ETDEWEB)
Luneville, L
1998-06-01
The multigroup discrete ordinates method is a classical way to solve transport equation (Boltzmann) for neutral particles. Self-shielding effects are not correctly treated due to large variations of cross sections in a group (in the resonance range). To treat the resonance domain, the multiband method is introduced. The main idea is to divide the cross section domain into bands. We obtain the multiband parameters using the moment method; the code CALENDF provides probability tables for these parameters. We present our implementation in an existing discrete ordinates code: SN1D. We study deep penetration benchmarks and show the improvement of the method in the treatment of self-shielding effects. (author) 15 refs.
Formal Verification Method for Configuration of Integrated Modular Avionics System Using MARTE
Directory of Open Access Journals (Sweden)
Lisong Wang
2018-01-01
Full Text Available The configuration information of Integrated Modular Avionics (IMA system includes almost all details of whole system architecture, which is used to configure the hardware interfaces, operating system, and interactions among applications to make an IMA system work correctly and reliably. It is very important to ensure the correctness and integrity of the configuration in the IMA system design phase. In this paper, we focus on modelling and verification of configuration information of IMA/ARINC653 system based on MARTE (Modelling and Analysis for Real-time and Embedded Systems. Firstly, we define semantic mapping from key concepts of configuration (such as modules, partitions, memory, process, and communications to components of MARTE element and propose a method for model transformation between XML-formatted configuration information and MARTE models. Then we present a formal verification framework for ARINC653 system configuration based on theorem proof techniques, including construction of corresponding REAL theorems according to the semantics of those key components of configuration information and formal verification of theorems for the properties of IMA, such as time constraints, spatial isolation, and health monitoring. After that, a special issue of schedulability analysis of ARINC653 system is studied. We design a hierarchical scheduling strategy with consideration of characters of the ARINC653 system, and a scheduling analyzer MAST-2 is used to implement hierarchical schedule analysis. Lastly, we design a prototype tool, called Configuration Checker for ARINC653 (CC653, and two case studies show that the methods proposed in this paper are feasible and efficient.
International Nuclear Information System (INIS)
Gran, Bjoern Axel; Sivertsen, Terje; Stoelen, Ketil; Thunem, Harald; Zhang, Wenhui
1999-02-01
The workshop 'Improved system development using case-tools based on formal methods' was organised in Halden, December 1-2, 1998. The purpose of the workshop was to present and discuss the state-of-the-art with respect to formal approaches. The workshop had two invited presentations: 'Formality in specification and modelling: developments in software engineering practice' by John Fitzgerald (Centre for Software Reliability, UK), and 'Formal methods in industry - reaching results when correctness is not the only issue' by Oeystein Haugen (Ericsson NorARC, Norway). The workshop also had several presentations divided into three sessions on industrial experience, tools, and combined approaches. Each day there was a discussion. The first was on the effect of formalization, while the second was on the role of formal verification. At the end of the workshop, the presentations and discussions were summarised into specific recommendations. This report summarises the presentations of the speakers, the discussions, the recommendations, and the demonstrations given at the workshop (author) (ml)
Energy Technology Data Exchange (ETDEWEB)
Ruthruff, Joseph. R. [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Armstrong, Robert C. [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Davis, Benjamin Garry [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Mayo, Jackson R. [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Punnoose, Ratish J. [Sandia National Lab. (SNL-CA), Livermore, CA (United States)
2012-09-01
Formal methods describe a class of system analysis techniques that seek to prove specific properties about analyzed designs, or locate flaws compromising those properties. As an analysis capability,these techniques are the subject of increased interest from both internal and external customers of Sandia National Laboratories. Given this lab's other areas of expertise, Sandia is uniquely positioned to advance the state-of-the-art with respect to several research and application areas within formal methods. This research project was a one-year effort funded by Sandia's CyberSecurity S&T Investment Area in its Laboratory Directed Research & Development program to investigate the opportunities for formal methods to impact Sandia's present mission areas, more fully understand the needs of the research community in the area of formal methods and where Sandia can contribute, and clarify from those potential research paths those that would best advance the mission-area interests of Sandia. The accomplishments from this project reinforce the utility of formal methods in Sandia, particularly in areas relevant to Cyber Security, and set the stage for continued Sandia investments to ensure this capabilityis utilized and advanced within this laboratory to serve the national interest.
World wide web implementation of the Langley technical report server
Nelson, Michael L.; Gottlich, Gretchen L.; Bianco, David J.
1994-01-01
On January 14, 1993, NASA Langley Research Center (LaRC) made approximately 130 formal, 'unclassified, unlimited' technical reports available via the anonymous FTP Langley Technical Report Server (LTRS). LaRC was the first organization to provide a significant number of aerospace technical reports for open electronic dissemination. LTRS has been successful in its first 18 months of operation, with over 11,000 reports distributed and has helped lay the foundation for electronic document distribution for NASA. The availability of World Wide Web (WWW) technology has revolutionized the Internet-based information community. This paper describes the transition of LTRS from a centralized FTP site to a distributed data model using the WWW, and suggests how the general model for LTRS can be applied to other similar systems.
New method of contour image processing based on the formalism of spiral light beams
Volostnikov, Vladimir G.; Kishkin, S. A.; Kotova, S. P.
2013-07-01
The possibility of applying the mathematical formalism of spiral light beams to the problems of contour image recognition is theoretically studied. The advantages and disadvantages of the proposed approach are evaluated; the results of numerical modelling are presented.
SACS2: Dynamic and Formal Safety Analysis Method for Complex Safety Critical System
International Nuclear Information System (INIS)
Koh, Kwang Yong; Seong, Poong Hyun
2009-01-01
Fault tree analysis (FTA) is one of the most widely used safety analysis technique in the development of safety critical systems. However, over the years, several drawbacks of the conventional FTA have become apparent. One major drawback is that conventional FTA uses only static gates and hence can not capture dynamic behaviors of the complex system precisely. Although several attempts such as dynamic fault tree (DFT), PANDORA, formal fault tree (FFT) and so on, have been made to overcome this problem, they can not still do absolute or actual time modeling because they adapt relative time concept and can capture only sequential behaviors of the system. Second drawback of conventional FTA is its lack of rigorous semantics. Because it is informal in nature, safety analysis results heavily depend on an analyst's ability and are error-prone. Finally reasoning process which is to check whether basic events really cause top events is done manually and hence very labor-intensive and timeconsuming for the complex systems. In this paper, we propose a new safety analysis method for complex safety critical system in qualitative manner. We introduce several temporal gates based on timed computational tree logic (TCTL) which can represent quantitative notion of time. Then, we translate the information of the fault trees into UPPAAL query language and the reasoning process is automatically done by UPPAAL which is the model checker for time critical system
Applying Formal Methods to NASA Projects: Transition from Research to Practice
Othon, Bill
2009-01-01
NASA project managers attempt to manage risk by relying on mature, well-understood process and technology when designing spacecraft. In the case of crewed systems, the margin for error is even tighter and leads to risk aversion. But as we look to future missions to the Moon and Mars, the complexity of the systems will increase as the spacecraft and crew work together with less reliance on Earth-based support. NASA will be forced to look for new ways to do business. Formal methods technologies can help NASA develop complex but cost effective spacecraft in many domains, including requirements and design, software development and inspection, and verification and validation of vehicle subsystems. To realize these gains, the technologies must be matured and field-tested so that they are proven when needed. During this discussion, current activities used to evaluate FM technologies for Orion spacecraft design will be reviewed. Also, suggestions will be made to demonstrate value to current designers, and mature the technology for eventual use in safety-critical NASA missions.
Indian Academy of Sciences (India)
by testing of the components and successful testing leads to the software being ... Formal verification is based on formal methods which are mathematically based ..... scenario under which a similar error could occur. There are various other ...
Stoelinga, Mariëlle; Pinger, Ralf
This volume contains the papers presented at FMICS 2012, the 17th International Workshop on Formal Methods for Industrial Critical Systems, taking place August 27–28, 2012, in Paris, France. The aim of the FMICS workshop series is to provide a forum for researchers who are interested in the
Rienties, Bart; Hosein, Anesa
2015-01-01
How and with whom academics develop and maintain formal and informal networks for reflecting on their teaching practice has received limited attention even though academic development (AD) programmes have become an almost ubiquitous feature of higher education. The primary goal of this mixed-method study is to unpack how 114 academics in an AD…
Roever, de W.P.; Barringer, H.; Courcoubetis, C.; Gabbay, D.M.; Gerth, R.T.; Jonsson, B.; Pnueli, A.; Reed, M.; Sifakis, J.; Vytopil, J.; Wolper, P.
1990-01-01
The Basic Research Action No. 3096, Formal Methods snd Tools for the Development of Distributed and Real Time Systems, is funded in the Area of Computer Science, under the ESPRIT Programme of the European Community. The coordinating institution is the Department of Computing Science, Eindhoven
Scientific and technical information output of the Langley Research Center for calendar year 1980
1981-01-01
This document is a compilation of the scientific and technical information that the Langley Research Center has produced during the calendar year 1980. Approximately 1400 citations are given. Formal reports, quick-release technical memorandums, contractor reports, journal articles, meeting/conference papers, computer programs, tech briefs, patents, and unpublished research are included.
Scientific and technical information output of the Langley Research Center for calendar year 1984
1985-01-01
The scientific and technical information that the Langley Research Center produced during the calendar year 1984 is compiled. Approximately 1650 citations are included comprising formal reports, quick-release technical memorandums, contractor reports, journal articles and other publications, meeting presentations, technical talks, computer programs, tech briefs, and patents.
Scientific and technical information output of the Langley Research Center for Calendar Year 1985
1986-01-01
A compilation of the scientific and technical information that the Langley Research Center has produced during the calendar year 1985 is presented. Included are citations for Formal Reports, Quick-Release Technical Memorandums, Contractor Reports, Journal Articles and Other Publications, Meeting Presentations, Technical Talks, Computer Programs, Tech Briefs, and Patents.
Scientific and technical information output of the Langley Research Center for calendar year 1986
1987-01-01
This document is a compilation of the scientific and technical information that the Langley Research Center has produced during the calendar year 1986. Included are citations for Formal Reports, Quick-Release Technical Memorandums, Contractor Reports, Journal Articles and Other Publications, Meeting Presentations, Techncial Talks, Computer Programs, Tech Briefs, and Patents.
New method of contour image processing based on the formalism of spiral light beams
International Nuclear Information System (INIS)
Volostnikov, Vladimir G; Kishkin, S A; Kotova, S P
2013-01-01
The possibility of applying the mathematical formalism of spiral light beams to the problems of contour image recognition is theoretically studied. The advantages and disadvantages of the proposed approach are evaluated; the results of numerical modelling are presented. (optical image processing)
Using Formal Methods to Cultivate Trust in Smart Card Operating Systems
Alberda, Marjan I.; Hartel, Pieter H.; de Jong, Eduard K.
To be widely accepted, smart cards must contain completely trustworthy software. Because smart cards contain relatively simple computers, and are used only for a specific class of applications, it is feasible to make the language used to program the software components focused and tiny. Formal
Cambell, T. G.; Bailey, M. C.; Cockrell, C. R.; Beck, F. B.
1983-01-01
The electromagnetic analysis activities at the Langley Research Center are resulting in efficient and accurate analytical methods for predicting both far- and near-field radiation characteristics of large offset multiple-beam multiple-aperture mesh reflector antennas. The utilization of aperture integration augmented with Geometrical Theory of Diffraction in analyzing the large reflector antenna system is emphasized.
Directory of Open Access Journals (Sweden)
Serhii D. Bushuiev
2017-12-01
Full Text Available The current state of project management has been steadily demonstrating a trend toward increasing the role of flexible "soft" management practices. A method for preparing solutions for the formation of a value-oriented portfolio based on a comparison of the level of internal organizational values is proposed. The method formalizes the methodological foundations of value-oriented portfolio management in the development of organizations in the form of approaches, basic terms and technological methods with ICT using, which makes it possible to use them as an integral knowledge system for creating an automated system for managing portfolios of organizations. The result of the study is the deepening of the theoretical provisions for managing the development of organizations through the implementation of a value-oriented portfolio of projects, which allowed formalize the method of recording value memes in the development portfolios of organizations, to disclose its logic, essence, objective basis and rules.
Ayu Nurul Handayani, Hemas; Waspada, Indra
2018-05-01
Non-formal Early Childhood Education (non-formal ECE) is an education that is held for children under 4 years old. The implementation in District of Banyumas, Non-formal ECE is monitored by The District Government of Banyumas and helped by Sanggar Kegiatan Belajar (SKB) Purwokerto as one of the organizer of Non-formal Education. The government itself has a program for distributing ECE to all villages in Indonesia. However, The location to construct the ECE school in several years ahead is not arranged yet. Therefore, for supporting that program, a decision support system is made to give some recommendation villages for constructing The ECE building. The data are projected based on Brown’s Double Exponential Smoothing Method and utilizing Preference Ranking Organization Method for Enrichment Evaluation (Promethee) to generate priority order. As the recommendations system, it generates map visualization which is colored according to the priority level of sub-district and village area. The system was tested with black box testing, Promethee testing, and usability testing. The results showed that the system functionality and Promethee algorithm were working properly, and the user was satisfied.
How Formal Methods Impels Discovery: A Short History of an Air Traffic Management Project
Butler, Ricky W.; Hagen, George; Maddalon, Jeffrey M.; Munoz, Cesar A.; Narkawicz, Anthony; Dowek, Gilles
2010-01-01
In this paper we describe a process of algorithmic discovery that was driven by our goal of achieving complete, mechanically verified algorithms that compute conflict prevention bands for use in en route air traffic management. The algorithms were originally defined in the PVS specification language and subsequently have been implemented in Java and C++. We do not present the proofs in this paper: instead, we describe the process of discovery and the key ideas that enabled the final formal proof of correctness
Consumer experience of formal crisis-response services and preferred methods of crisis intervention.
Boscarato, Kara; Lee, Stuart; Kroschel, Jon; Hollander, Yitzchak; Brennan, Alice; Warren, Narelle
2014-08-01
The manner in which people with mental illness are supported in a crisis is crucial to their recovery. The current study explored mental health consumers' experiences with formal crisis services (i.e. police and crisis assessment and treatment (CAT) teams), preferred crisis supports, and opinions of four collaborative interagency response models. Eleven consumers completed one-on-one, semistructured interviews. The results revealed that the perceived quality of previous formal crisis interventions varied greatly. Most participants preferred family members or friends to intervene. However, where a formal response was required, general practitioners and mental health case managers were preferred; no participant wanted a police response, and only one indicated a preference for CAT team assistance. Most participants welcomed collaborative crisis interventions. Of four collaborative interagency response models currently being trialled internationally, participants most strongly supported the Ride-Along Model, which enables a police officer and a mental health clinician to jointly respond to distressed consumers in the community. The findings highlight the potential for an interagency response model to deliver a crisis response aligned with consumers' preferences. © 2014 Australian College of Mental Health Nurses Inc.
Energy Technology Data Exchange (ETDEWEB)
Determan, John Clifford [Los Alamos National Laboratory; Longo, Joseph F [Los Alamos National Laboratory; Michel, Kelly D [Los Alamos National Laboratory
2009-01-01
The Unattended and Remote Monitoring (UNARM) system is a collection of specialized hardware and software used by the International Atomic Energy Agency (IAEA) to institute nuclear safeguards at many nuclear facilities around the world. The hardware consists of detectors, instruments, and networked computers for acquiring various forms of data, including but not limited to radiation data, global position coordinates, camera images, isotopic data, and operator declarations. The software provides two primary functions: the secure and reliable collection of this data from the instruments and the ability to perform an integrated review and analysis of the disparate data sources. Several years ago the team responsible for maintaining the software portion of the UNARM system began the process of formalizing its operations. These formal operations include a configuration management system, a change control board, an issue tracking system, and extensive formal testing, for both functionality and reliability. Functionality is tested with formal test cases chosen to fully represent the data types and methods of analysis that will be commonly encountered. Reliability is tested with iterative, concurrent testing where up to five analyses are executed simultaneously for thousands of cycles. Iterative concurrent testing helps ensure that there are no resource conflicts or leaks when multiple system components are in use simultaneously. The goal of this work is to provide a high quality, reliable product, commensurate with the criticality of the application. Testing results will be presented that demonstrate that this goal has been achieved and the impact of the introduction of a formal software engineering framework to the UNARM product will be presented.
Vested Madsen, Matias; Macario, Alex; Yamamoto, Satoshi; Tanaka, Pedro
2016-06-01
In this study, we examined the regularly scheduled, formal teaching sessions in a single anesthesiology residency program to (1) map the most common primary instructional methods, (2) map the use of 10 known teaching techniques, and (3) assess if residents scored sessions that incorporated active learning as higher quality than sessions with little or no verbal interaction between teacher and learner. A modified Delphi process was used to identify useful teaching techniques. A representative sample of each of the formal teaching session types was mapped, and residents anonymously completed a 5-question written survey rating the session. The most common primary instructional methods were computer slides-based classroom lectures (66%), workshops (15%), simulations (5%), and journal club (5%). The number of teaching techniques used per formal teaching session averaged 5.31 (SD, 1.92; median, 5; range, 0-9). Clinical applicability (85%) and attention grabbers (85%) were the 2 most common teaching techniques. Thirty-eight percent of the sessions defined learning objectives, and one-third of sessions engaged in active learning. The overall survey response rate equaled 42%, and passive sessions had a mean score of 8.44 (range, 5-10; median, 9; SD, 1.2) compared with a mean score of 8.63 (range, 5-10; median, 9; SD, 1.1) for active sessions (P = 0.63). Slides-based classroom lectures were the most common instructional method, and faculty used an average of 5 known teaching techniques per formal teaching session. The overall education scores of the sessions as rated by the residents were high.
International Nuclear Information System (INIS)
Bohn, M.P.
1992-12-01
As part of the NRC-sponsored program to study the implications of Generic Issue 57, ''Effects of Fire Protection System Actuation on Safety-Related Equipment,'' a subtask was performed to evaluate the applicability of formal decision analysis methods to generic issues cost/benefit-type decisions and to apply these methods to the GI-57 results. In this report, the numerical results obtained from the analysis of three plants (two PWRs and one BWR) as developed in the technical resolution program for GI-57 were studied. For each plant, these results included a calculation of the person-REM averted due to various accident scenarios and various proposed modifications to mitigate the accident scenarios identified. These results were recomputed to break out the benefit in terms of contributions due to random event scenarios, fire event scenarios, and seismic event scenarios. Furthermore, the benefits associated with risk (in terms of person-REM) averted from earthquakes at three different seismic ground motion levels were separately considered. Given this data, formal decision methodologies involving decision trees, value functions, and utility functions were applied to this basic data. It is shown that the formal decision methodology can be applied at several different levels. Examples are given in which the decision between several retrofits is changed from that resulting from a simple cost/benefit-ratio criterion by virtue of the decision-makinger's expressed (and assumed) preferences
Leaphart, Cynthia L; Gonwa, Thomas A; Mai, Martin L; Prendergast, Mary B; Wadei, Hani M; Tepas, Joseph J; Taner, C Burcin
2012-09-01
Broad-based formal quality improvement curriculum emphasizing Six Sigma and the DMAIC approach developed by our institution is required for physicians in training. DMAIC methods evaluated the common outcome of postoperative hyponatremia, thus resulting in collaboration to prevent hyponatremia in the renal transplant population. To define postoperative hyponatremia in renal transplant recipients, a project charter outlined project aims. To measure postoperative hyponatremia, serum sodium at admission and immediately postoperative were recorded by retrospective review of renal transplant recipient charts from June 29, 2010 to December 31, 2011. An Ishikawa diagram was generated to analyze potential causative factors. Interdisciplinary collaboration and hospital policy assessment determined necessary improvements to prevent hyponatremia. Continuous monitoring in control phase was performed by establishing the goal of DMAIC approach and formal quality curriculum for trainees addresses core competencies by providing a framework for problem solving, interdisciplinary collaboration, and process improvement. Copyright © 2012 Elsevier Inc. All rights reserved.
State-of-the-art report for the testing and formal verification methods for FBD program
International Nuclear Information System (INIS)
Jee, Eun Kyoung; Lee, Jang Soo; Lee, Young Jun; Yoo, Jun Beom
2011-10-01
The importance of PLC testing has increased in the nuclear I and C domain. While regulation authorities require both functional and structural testing for safety system software, FBD testing relies only on functional testing and there has been little research on structural testing techniques for FBD programs. We aim to analyze current techniques related to FBD testing and develop a structural testing technique appropriate to FBD programs. We developed structural test coverage criteria applicable to FBD programs, focusing on data paths from input edges to output edges of FBD programs. A data path condition (DPC), under which input data can flow into the output edge, is defined for each data path. We defined basic coverage, input condition coverage and complex condition coverage criteria based on the formal definition of DPC. We also developed a measurement procedure for FBD testing adequacy and a supporting tool prototype
On the formal equivalence of the TAP and thermodynamic methods in the SK model
International Nuclear Information System (INIS)
Cavagna, Andrea; Giardina, Irene; Parisi, Giorgio; Mezard, Marc
2003-01-01
We revisit two classic Thouless-Anderson-Palmer (TAP) studies of the Sherrington-Kirkpatrick model (Bray A J and Moore M A 1980 J. Phys. C: Solid State Phys. 13 L469; De Dominicis C and Young A P 1983 J. Phys. A: Math. Gen. 16 2063). By using the Becchi-Rouet-Stora-Tyutin (BRST) supersymmetry, we prove the general equivalence of TAP and replica partition functions, and show that the annealed calculation of the TAP complexity is formally identical to the quenched thermodynamic calculation of the free energy at one step level of replica symmetry breaking. The complexity we obtain by means of the BRST symmetry turns out to be considerably smaller than the previous non-symmetric value
The Role of Computers in Research and Development at Langley Research Center
Wieseman, Carol D. (Compiler)
1994-01-01
This document is a compilation of presentations given at a workshop on the role cf computers in research and development at the Langley Research Center. The objectives of the workshop were to inform the Langley Research Center community of the current software systems and software practices in use at Langley. The workshop was organized in 10 sessions: Software Engineering; Software Engineering Standards, methods, and CASE tools; Solutions of Equations; Automatic Differentiation; Mosaic and the World Wide Web; Graphics and Image Processing; System Design Integration; CAE Tools; Languages; and Advanced Topics.
Krylov, Piotr
2017-01-01
This monograph is a comprehensive account of formal matrices, examining homological properties of modules over formal matrix rings and summarising the interplay between Morita contexts and K theory. While various special types of formal matrix rings have been studied for a long time from several points of view and appear in various textbooks, for instance to examine equivalences of module categories and to illustrate rings with one-sided non-symmetric properties, this particular class of rings has, so far, not been treated systematically. Exploring formal matrix rings of order 2 and introducing the notion of the determinant of a formal matrix over a commutative ring, this monograph further covers the Grothendieck and Whitehead groups of rings. Graduate students and researchers interested in ring theory, module theory and operator algebras will find this book particularly valuable. Containing numerous examples, Formal Matrices is a largely self-contained and accessible introduction to the topic, assuming a sol...
A connection between the asymptotic iteration method and the continued fractions formalism
International Nuclear Information System (INIS)
Matamala, A.R.; Gutierrez, F.A.; Diaz-Valdes, J.
2007-01-01
In this work, we show that there is a connection between the asymptotic iteration method (a method to solve second order linear ordinary differential equations) and the older method of continued fractions to solve differential equations
International Nuclear Information System (INIS)
Witte, N.S.; Shankar, R.
1999-01-01
We examine the Ising chain in a transverse field at zero temperature from the point of view of a family of moment formalisms based upon the cumulant generating function, where we find exact solutions for the generating functions and cumulants at arbitrary couplings and hence for both the ordered and disordered phases of the model. In a t-expansion analysis, the exact Horn-Weinstein function E(t) has cuts along an infinite set of curves in the complex Jt-plane which are confined to the left-hand half-plane ImJt < -((1)/(4)) for the phase containing the trial state (disordered), but are not so for the other phase (ordered). For finite couplings the expansion has a finite radius of convergence. Asymptotic forms for this function exhibit a crossover at the critical point, giving the excited state gap in the ground state sector for the disordered phase, and the first excited state gap in the ordered phase. Convergence of the t-expansion with respect to truncation order is found in the disordered phase right up to the critical point, for both the ground state energy and the excited state gap. However, convergence is found in only one of the connected moments expansions (CMX), the CMX-LT, and the ground state energy shows convergence right to the criticalpoint again, although to a limited accuracy
"Debate" Learning Method and Its Implications for the Formal Education System
Najafi, Mohammad; Motaghi, Zohre; Nasrabadi, Hassanali Bakhtiyar; Heshi, Kamal Nosrati
2016-01-01
Regarding the importance of enhancement in learner's social skills, especially in learning process, this study tries to introduce one of the group learning programs entitled "debate" as a teaching method in Iran religious universities. It also considers the concept and the history of this method by qualitative and descriptive-analytical…
International Nuclear Information System (INIS)
Song, Myung Jun; Koo, Seo Ryong; Seong, Poong Hyun
2004-01-01
As PLCs are widely used in the digital I and C systems of nuclear power plants (NPPs), the safety of PLC software has become the most important consideration. Software safety is an important property for safety critical systems, especially those in aerospace, satellite and nuclear power plants, whose failure could result in danger to human life, property or environment. It is recently becoming more important due to the increase in the complexity and size of safety critical systems. This research proposes a method to perform effective verification tasks on the traceability analysis and software design evaluation in the software design phase. In order to perform the traceability analysis between a Software Requirements Specification (SRS) written in a natural language and a Software Design Specification (SDS) written in Function Block Diagram (FBD), this method uses extended-structured decision tables (ESDTs). ESDTs include information related to the traceability analysis from a text-based SRS and a FBD-based SDS, respectively. Through comparing with both ESDTs from an SRS and ESDTs from an SDS, the effective traceability analysis of both a text-based SRS and a FBD-based SDS can be achieved. For the software design evaluation, a model checking, which is mainly used to verify PLC programs formally, is used in this research. A FBD-style design specification is translated into input languages of the SMV by translation rules and then the FBD-style design specification can be formally analyzed using SMV. (author)
International Nuclear Information System (INIS)
Le Tellier, R.; Hebert, A.
2004-01-01
The method of characteristics is well known for its slow convergence; consequently, as it is often done for SN methods, the Generalized Minimal Residual approach (GMRES) has been investigated for its practical implementation and its high reliability. GMRES is one of the most effective Krylov iterative methods to solve large linear systems. Moreover, the system has been 'left preconditioned' with the Algebraic Collapsing Acceleration (ACA) a variant of the Diffusion Synthetic Acceleration (DSA) based on I. Suslov's former works. This paper presents the first numerical results of these methods in 2D geometries with material discontinuities. Indeed, previous investigations have shown a degraded effectiveness of Diffusion Synthetic Accelerations with this kind of geometries. Results are presented for 9 x 9 Cartesian assemblies in terms of the speed of convergence of the inner iterations (fixed source) of the method of characteristics. It shows a significant improvement on the convergence rate. (authors)
Geometry and Formal Linguistics.
Huff, George A.
This paper presents a method of encoding geometric line-drawings in a way which allows sets of such drawings to be interpreted as formal languages. A characterization of certain geometric predicates in terms of their properties as languages is obtained, and techniques usually associated with generative grammars and formal automata are then applied…
Applying Formal Methods to an Information Security Device: An Experience Report
National Research Council Canada - National Science Library
Kirby, Jr, James; Archer, Myla; Heitmeyer, Constance
1999-01-01
.... This paper describes a case study in which the SCR method was used to specify and analyze a different class of system, a cryptographic system called CD, which must satisfy a large set of security properties...
Energy Technology Data Exchange (ETDEWEB)
Choi, J. Y.; Choi, B. J.; Song, H. J.; Hwang, D. Y.; Song, G. H.; Lee, H. [Korea University, Seoul (Korea, Republic of)
2008-06-15
This research is on help develop nuclear power plant control system, through the requirement specification and verification method development. As the result of applying the test method, a test standard was obtain through test documentation writing support and a test document reflecting the standard test activities based on the test standard. The specification and verification of the pCOS system and the unified testing documentation and execution helps the entire project to progress and enable us to achieve necessary documents and technology to develop a safety critical system.
International Nuclear Information System (INIS)
Choi, J. Y.; Choi, B. J.; Song, H. J.; Hwang, D. Y.; Song, G. H.; Lee, H.
2008-06-01
This research is on help develop nuclear power plant control system, through the requirement specification and verification method development. As the result of applying the test method, a test standard was obtain through test documentation writing support and a test document reflecting the standard test activities based on the test standard. The specification and verification of the pCOS system and the unified testing documentation and execution helps the entire project to progress and enable us to achieve necessary documents and technology to develop a safety critical system
Evaluation of formal methods in hip joint center assessment: an in vitro analysis.
Lopomo, Nicola; Sun, Lei; Zaffagnini, Stefano; Giordano, Giovanni; Safran, Marc R
2010-03-01
The hip joint center is a fundamental landmark in the identification of lower limb mechanical axis; errors in its location lead to substantial inaccuracies both in joint reconstruction and in gait analysis. Actually in Computer Aided Surgery functional non-invasive procedures have been tested in identifying this landmark, but an anatomical validation is scarcely discussed. A navigation system was used to acquire data on eight cadaveric hips. Pivoting functional maneuver and hip joint anatomy were analyzed. Two functional methods - both with and without using the pelvic tracker - were evaluated: specifically a sphere fit method and a transformation techniques. The positions of the estimated centers with respect to the anatomical center of the femoral head, the influence of this deviation on the kinematic assessment and on the identification of femoral mechanical axis were analyzed. We found that the implemented transformation technique was the most reliable estimation of hip joint center, introducing a - Mean (SD) - difference of 1.6 (2.7) mm from the anatomical center with the pelvic tracker, whereas sphere fit method without it demonstrated the lowest accuracy with 25.2 (18.9) mm of deviation. Otherwise both the methods reported similar accuracy (<3mm of deviation). The functional estimations resulted in the best case to be in an average of less than 2mm from the anatomical center, which corresponds to angular deviations of the femoral mechanical axis smaller than 1.7 (1.3) degrees and negligible errors in kinematic assessment of angular displacements.
International Nuclear Information System (INIS)
Kim, Yun Goo; Seong, Poong Hyun
2012-01-01
The Computerized Procedure System (CPS) is one of the primary operating support systems in the digital Main Control Room. The CPS displays procedure on the computer screen in the form of a flow chart, and displays plant operating information along with procedure instructions. It also supports operator decision making by providing a system decision. A procedure flow should be correct and reliable, as an error would lead to operator misjudgement and inadequate control. In this paper we present a modeling for the CPS that enables formal verification based on Petri nets. The proposed State Token Petri Nets (STPN) also support modeling of a procedure flow that has various interruptions by the operator, according to the plant condition. STPN modeling is compared with Coloured Petri net when they are applied to Emergency Operating Computerized Procedure. A converting program for Computerized Procedure (CP) to STPN has been also developed. The formal verification and validation methods of CP with STPN increase the safety of a nuclear power plant and provide digital quality assurance means that are needed when the role and function of the CPS is increasing.
Software engineering from a Langley perspective
Voigt, Susan
1994-01-01
A brief introduction to software engineering is presented. The talk is divided into four sections beginning with the question 'What is software engineering', followed by a brief history of the progression of software engineering at the Langley Research Center in the context of an expanding computing environment. Several basic concepts and terms are introduced, including software development life cycles and maturity levels. Finally, comments are offered on what software engineering means for the Langley Research Center and where to find more information on the subject.
Chu, Shih-I.; Telnov, Dmitry A.
2004-02-01
The advancement of high-power and short-pulse laser technology in the past two decades has generated considerable interest in the study of multiphoton and very high-order nonlinear optical processes of atomic and molecular systems in intense and superintense laser fields, leading to the discovery of a host of novel strong-field phenomena which cannot be understood by the conventional perturbation theory. The Floquet theorem and the time-independent Floquet Hamiltonian method are powerful theoretical framework for the study of bound-bound multiphoton transitions driven by periodically time-dependent fields. However, there are a number of significant strong-field processes cannot be directly treated by the conventional Floquet methods. In this review article, we discuss several recent developments of generalized Floquet theorems, formalisms, and quasienergy methods, beyond the conventional Floquet theorem, for accurate nonperturbative treatment of a broad range of strong-field atomic and molecular processes and phenomena of current interests. Topics covered include (a) artificial intelligence (AI)-most-probable-path approach (MPPA) for effective treatment of ultralarge Floquet matrix problem; (b) non-Hermitian Floquet formalisms and complex quasienergy methods for nonperturbative treatment of bound-free and free-free processes such as multiphoton ionization (MPI) and above-threshold ionization (ATI) of atoms and molecules, multiphoton dissociation (MPD) and above-threshold dissociation (ATD) of molecules, chemical bond softening and hardening, charge-resonance enhanced ionization (CREI) of molecular ions, and multiple high-order harmonic generation (HHG), etc.; (c) many-mode Floquet theorem (MMFT) for exact treatment of multiphoton processes in multi-color laser fields with nonperiodic time-dependent Hamiltonian; (d) Floquet-Liouville supermatrix (FLSM) formalism for exact nonperturbative treatment of time-dependent Liouville equation (allowing for relaxations and
International Nuclear Information System (INIS)
Chu, S.-I.; Telnov, D.A.
2004-01-01
The advancement of high-power and short-pulse laser technology in the past two decades has generated considerable interest in the study of multiphoton and very high-order nonlinear optical processes of atomic and molecular systems in intense and superintense laser fields, leading to the discovery of a host of novel strong-field phenomena which cannot be understood by the conventional perturbation theory. The Floquet theorem and the time-independent Floquet Hamiltonian method are powerful theoretical framework for the study of bound-bound multiphoton transitions driven by periodically time-dependent fields. However, there are a number of significant strong-field processes cannot be directly treated by the conventional Floquet methods. In this review article, we discuss several recent developments of generalized Floquet theorems, formalisms, and quasienergy methods, beyond the conventional Floquet theorem, for accurate nonperturbative treatment of a broad range of strong-field atomic and molecular processes and phenomena of current interests. Topics covered include (a) artificial intelligence (AI)-most-probable-path approach (MPPA) for effective treatment of ultralarge Floquet matrix problem; (b) non-Hermitian Floquet formalisms and complex quasienergy methods for nonperturbative treatment of bound-free and free-free processes such as multiphoton ionization (MPI) and above-threshold ionization (ATI) of atoms and molecules, multiphoton dissociation (MPD) and above-threshold dissociation (ATD) of molecules, chemical bond softening and hardening, charge-resonance enhanced ionization (CREI) of molecular ions, and multiple high-order harmonic generation (HHG), etc.; (c) many-mode Floquet theorem (MMFT) for exact treatment of multiphoton processes in multi-color laser fields with nonperiodic time-dependent Hamiltonian; (d) Floquet-Liouville supermatrix (FLSM) formalism for exact nonperturbative treatment of time-dependent Liouville equation (allowing for relaxations and
Software Formal Inspections Guidebook
1993-01-01
The Software Formal Inspections Guidebook is designed to support the inspection process of software developed by and for NASA. This document provides information on how to implement a recommended and proven method for conducting formal inspections of NASA software. This Guidebook is a companion document to NASA Standard 2202-93, Software Formal Inspections Standard, approved April 1993, which provides the rules, procedures, and specific requirements for conducting software formal inspections. Application of the Formal Inspections Standard is optional to NASA program or project management. In cases where program or project management decide to use the formal inspections method, this Guidebook provides additional information on how to establish and implement the process. The goal of the formal inspections process as documented in the above-mentioned Standard and this Guidebook is to provide a framework and model for an inspection process that will enable the detection and elimination of defects as early as possible in the software life cycle. An ancillary aspect of the formal inspection process incorporates the collection and analysis of inspection data to effect continual improvement in the inspection process and the quality of the software subjected to the process.
Formal Analysis of SET and NSL Protocols Using the Interpretation Functions-Based Method
Directory of Open Access Journals (Sweden)
Hanane Houmani
2012-01-01
Full Text Available Most applications in the Internet such as e-banking and e-commerce use the SET and the NSL protocols to protect the communication channel between the client and the server. Then, it is crucial to ensure that these protocols respect some security properties such as confidentiality, authentication, and integrity. In this paper, we analyze the SET and the NSL protocols with respect to the confidentiality (secrecy property. To perform this analysis, we use the interpretation functions-based method. The main idea behind the interpretation functions-based technique is to give sufficient conditions that allow to guarantee that a cryptographic protocol respects the secrecy property. The flexibility of the proposed conditions allows the verification of daily-life protocols such as SET and NSL. Also, this method could be used under different assumptions such as a variety of intruder abilities including algebraic properties of cryptographic primitives. The NSL protocol, for instance, is analyzed with and without the homomorphism property. We show also, using the SET protocol, the usefulness of this approach to correct weaknesses and problems discovered during the analysis.
An evaluation of learning resources in the teaching of formal philosophical methods
Directory of Open Access Journals (Sweden)
Susan A.J. Stuart
2003-12-01
Full Text Available In any discipline, across a wide variety of subjects, there are numerous learning resources available to students. For many students the resources that will be most beneficial to them are quickly apparent but, because of the nature of philosophy and the philosophical method, it is not immediately clear which resources will be most valuable to students for whom the development of critical thinking skills is crucial. If we are to support these students effectively in their learning we must establish what these resources are how we can continue to maintain and improve them, and how we can encourage students to make good use of them. In this paper we describe and assess our evaluation of the use made by students of learning resources in the context of learning logic and in developing their critical thinking skills. We also assess the use of a new resource, electronic handsets, the purpose of which is to encourage students to respond to questions in lectures and to gain feedback about how they are progressing with the material.
Formal Analysis of Domain Models
National Research Council Canada - National Science Library
Bharadwaj, Ramesh
2002-01-01
Recently, there has been a great deal of interest in the application of formal methods, in particular, precise formal notations and automatic analysis tools for the creation and analysis of requirements specifications (i.e...
Indian Academy of Sciences (India)
dimensional superfields, is a clear signature of the presence of the (anti-)BRST invariance in the original. 4D theory. Keywords. Non-Abelian 1-form gauge theory; Dirac fields; (anti-)Becchi–Roucet–Stora–. Tyutin invariance; superfield formalism; ...
NASA Langley/CNU Distance Learning Programs.
Caton, Randall; Pinelli, Thomas E.
NASA Langley Research Center and Christopher Newport University (CNU) provide, free to the public, distance learning programs that focus on math, science, and/or technology over a spectrum of education levels from K-adult. The effort started in 1997, and currently there are a suite of five distance-learning programs. This paper presents the major…
Directory of Open Access Journals (Sweden)
Sutapa Datta
Full Text Available An important step in understanding gene regulation is to identify the promoter regions where the transcription factor binding takes place. Predicting a promoter region de novo has been a theoretical goal for many researchers for a long time. There exists a number of in silico methods to predict the promoter region de novo but most of these methods are still suffering from various shortcomings, a major one being the selection of appropriate features of promoter region distinguishing them from non-promoters. In this communication, we have proposed a new composite method that predicts promoter sequences based on the interrelationship between structural profiles of DNA and primary sequence elements of the promoter regions. We have shown that a Context Free Grammar (CFG can formalize the relationships between different primary sequence features and by utilizing the CFG, we demonstrate that an efficient parser can be constructed for extracting these relationships from DNA sequences to distinguish the true promoter sequences from non-promoter sequences. Along with CFG, we have extracted the structural features of the promoter region to improve upon the efficiency of our prediction system. Extensive experiments performed on different datasets reveals that our method is effective in predicting promoter sequences on a genome-wide scale and performs satisfactorily as compared to other promoter prediction techniques.
Datta, Sutapa; Mukhopadhyay, Subhasis
2013-01-01
An important step in understanding gene regulation is to identify the promoter regions where the transcription factor binding takes place. Predicting a promoter region de novo has been a theoretical goal for many researchers for a long time. There exists a number of in silico methods to predict the promoter region de novo but most of these methods are still suffering from various shortcomings, a major one being the selection of appropriate features of promoter region distinguishing them from non-promoters. In this communication, we have proposed a new composite method that predicts promoter sequences based on the interrelationship between structural profiles of DNA and primary sequence elements of the promoter regions. We have shown that a Context Free Grammar (CFG) can formalize the relationships between different primary sequence features and by utilizing the CFG, we demonstrate that an efficient parser can be constructed for extracting these relationships from DNA sequences to distinguish the true promoter sequences from non-promoter sequences. Along with CFG, we have extracted the structural features of the promoter region to improve upon the efficiency of our prediction system. Extensive experiments performed on different datasets reveals that our method is effective in predicting promoter sequences on a genome-wide scale and performs satisfactorily as compared to other promoter prediction techniques. PMID:23437045
Directory of Open Access Journals (Sweden)
Alexei Kassian
Full Text Available A lexicostatistical classification is proposed for 20 languages and dialects of the Lezgian group of the North Caucasian family, based on meticulously compiled 110-item wordlists, published as part of the Global Lexicostatistical Database project. The lexical data have been subsequently analyzed with the aid of the principal phylogenetic methods, both distance-based and character-based: Starling neighbor joining (StarlingNJ, Neighbor joining (NJ, Unweighted pair group method with arithmetic mean (UPGMA, Bayesian Markov chain Monte Carlo (MCMC, Unweighted maximum parsimony (UMP. Cognation indexes within the input matrix were marked by two different algorithms: traditional etymological approach and phonetic similarity, i.e., the automatic method of consonant classes (Levenshtein distances. Due to certain reasons (first of all, high lexicographic quality of the wordlists and a consensus about the Lezgian phylogeny among Caucasologists, the Lezgian database is a perfect testing area for appraisal of phylogenetic methods. For the etymology-based input matrix, all the phylogenetic methods, with the possible exception of UMP, have yielded trees that are sufficiently compatible with each other to generate a consensus phylogenetic tree of the Lezgian lects. The obtained consensus tree agrees with the traditional expert classification as well as some of the previously proposed formal classifications of this linguistic group. Contrary to theoretical expectations, the UMP method has suggested the least plausible tree of all. In the case of the phonetic similarity-based input matrix, the distance-based methods (StarlingNJ, NJ, UPGMA have produced the trees that are rather close to the consensus etymology-based tree and the traditional expert classification, whereas the character-based methods (Bayesian MCMC, UMP have yielded less likely topologies.
Kassian, Alexei
2015-01-01
A lexicostatistical classification is proposed for 20 languages and dialects of the Lezgian group of the North Caucasian family, based on meticulously compiled 110-item wordlists, published as part of the Global Lexicostatistical Database project. The lexical data have been subsequently analyzed with the aid of the principal phylogenetic methods, both distance-based and character-based: Starling neighbor joining (StarlingNJ), Neighbor joining (NJ), Unweighted pair group method with arithmetic mean (UPGMA), Bayesian Markov chain Monte Carlo (MCMC), Unweighted maximum parsimony (UMP). Cognation indexes within the input matrix were marked by two different algorithms: traditional etymological approach and phonetic similarity, i.e., the automatic method of consonant classes (Levenshtein distances). Due to certain reasons (first of all, high lexicographic quality of the wordlists and a consensus about the Lezgian phylogeny among Caucasologists), the Lezgian database is a perfect testing area for appraisal of phylogenetic methods. For the etymology-based input matrix, all the phylogenetic methods, with the possible exception of UMP, have yielded trees that are sufficiently compatible with each other to generate a consensus phylogenetic tree of the Lezgian lects. The obtained consensus tree agrees with the traditional expert classification as well as some of the previously proposed formal classifications of this linguistic group. Contrary to theoretical expectations, the UMP method has suggested the least plausible tree of all. In the case of the phonetic similarity-based input matrix, the distance-based methods (StarlingNJ, NJ, UPGMA) have produced the trees that are rather close to the consensus etymology-based tree and the traditional expert classification, whereas the character-based methods (Bayesian MCMC, UMP) have yielded less likely topologies.
Use of World Wide Web and NCSA Mcsaic at Langley
Nelson, Michael
1994-01-01
A brief history of the use of the World Wide Web at Langley Research Center is presented along with architecture of the Langley Web. Benefits derived from the Web and some Langley projects that have employed the World Wide Web are discussed.
International Nuclear Information System (INIS)
Koo, S. R.; Seong, P. H.
1999-01-01
In this work, a formal requirements analysis method for Nuclear Power Plant (NPP) I and C systems is suggested. This method uses Unified Modeling Language (UML) for modeling systems visually and Software Cost Reduction (SCR) formalism for checking the system models. Since object-oriented method can analyze a document by the objects in a real system, UML models that use object-oriented method are useful for understanding problems and communicating with everyone involved in the project. In order to analyze the requirement more formally, SCR tabular notations is converted from UML models. To help flow-through from UML models to SCR specifications, additional syntactic extensions for UML notation and a converting procedure are defined. The combined method has been applied to Dynamic Safety System (DSS). From this application, three kinds of errors were detected in the existing DSS requirements
DEFF Research Database (Denmark)
Vested Madsen, Matias; Macario, Alex; Yamamoto, Satoshi
2016-01-01
learning as higher quality than sessions with little or no verbal interaction between teacher and learner. A modified Delphi process was used to identify useful teaching techniques. A representative sample of each of the formal teaching session types was mapped, and residents anonymously completed a 5...... formal teaching session. The overall education scores of the sessions as rated by the residents were high....
Denning, Peter J.
1991-01-01
The ongoing debate over the role of formalism and formal specifications in software features many speakers with diverse positions. Yet, in the end, they share the conviction that the requirements of a software system can be unambiguously specified, that acceptable software is a product demonstrably meeting the specifications, and that the design process can be carried out with little interaction between designers and users once the specification has been agreed to. This conviction is part of a larger paradigm prevalent in American management thinking, which holds that organizations are systems that can be precisely specified and optimized. This paradigm, which traces historically to the works of Frederick Taylor in the early 1900s, is no longer sufficient for organizations and software systems today. In the domain of software, a new paradigm, called user-centered design, overcomes the limitations of pure formalism. Pioneered in Scandinavia, user-centered design is spreading through Europe and is beginning to make its way into the U.S.
Directory of Open Access Journals (Sweden)
Julian Galindo Losada
2016-11-01
Full Text Available Emerging companies involved in design and implementation of innovative products demand multidisciplinary teams to be competitive in the market. This need mainly exposes designers to extend their knowledge not only in User Interface elements of the design process but also in software methodologies to cover the lack of resources and expertise in start-ups. It raises the question of how designers can line up HCI techniques with best practices in software development while preserving usability and easy-to-use principles. To explore this gap, this paper proposes an approach which combines existing technology and methods by studying the nexus between HCI prototyping and software engineering. The approach is applied into a case study in the design of a virtual shop harmonizing the use of storyboards and the spiral. A comprehensive analysis is performed by using a Technology acceptance model (TAM regarding with two variables: usability and easy-to-use. The present finding underlines the positive integration of HCI techniques and formal methods without compromising user satisfaction with a potential benefit for small companies in a formation stage.
Research and technology, 1991. Langley Research Center
1992-01-01
The mission of the NASA Langley Research Center is to increase the knowledge and capability of the United States in a full range of aeronautics disciplines and in selected space disciplines. This mission will be accomplished by performing innovative research relevant to national needs and Agency goals, transferring technology to users in a timely manner, and providing development support to other United States Government agencies, industry, and other NASA centers. Highlights are given of the major accomplishments and applications that have been made during the past year. The highlights illustrate both the broad range of the research and technology (R&T) activities at NASA Langley Research Center and the contributions of this work toward maintaining United States leadership in aeronautics and space research.
1991-10-01
SUBJECT TERMS 15. NUMBER OF PAGES engineering management information systems method formalization 60 information engineering process modeling 16 PRICE...CODE information systems requirements definition methods knowlede acquisition methods systems engineering 17. SECURITY CLASSIFICATION ji. SECURITY... Management , Inc., Santa Monica, California. CORYNEN, G. C., 1975, A Mathematical Theory of Modeling and Simula- tion. Ph.D. Dissertation, Department
Directory of Open Access Journals (Sweden)
Alexey E. Fedoseev
2014-01-01
Full Text Available The article considers the development of formal methods of assessing the rating criterion exponents. The article deals with the mathematical model, which allows to connect together quantitative rating criterion characteristics, measured in various scales, with intuitive idea of them. The solution to the problem of rating criterion estimation is proposed.
Miloševic Zupancic, Vesna
2018-01-01
Research from the field of non-formal education (NFE) in youth work emphasises the central role of experiential learning and learning in groups. The present paper aims to research teaching methods and teaching forms in NFE in youth work. The research sought to answer the following research questions: 'What teaching forms can be found in NFE for…
NASA Langley Research Center tethered balloon systems
Owens, Thomas L.; Storey, Richard W.; Youngbluth, Otto
1987-01-01
The NASA Langley Research Center tethered balloon system operations are covered in this report for the period of 1979 through 1983. Meteorological data, ozone concentrations, and other data were obtained from in situ measurements. The large tethered balloon had a lifting capability of 30 kilograms to 2500 meters. The report includes descriptions of the various components of the balloon systems such as the balloons, the sensors, the electronics, and the hardware. Several photographs of the system are included as well as a list of projects including the types of data gathered.
GRIP LANGLEY AEROSOL RESEARCH GROUP EXPERIMENT (LARGE) V1
National Aeronautics and Space Administration — Langley Aerosol Research Group Experiment (LARGE) measures ultrafine aerosol number density, total and non-volatile aerosol number density, dry aerosol size...
Formalizing physical security procedures
Meadows, C.; Pavlovic, Dusko
Although the problems of physical security emerged more than 10,000 years before the problems of computer security, no formal methods have been developed for them, and the solutions have been evolving slowly, mostly through social procedures. But as the traffic on physical and social networks is now
Langley Research Center Strategic Plan for Education
Proctor, Sandra B.
1994-01-01
Research assignment centered on the preparation of final draft of the NASA Langley Strategic Plan for Education. Primary research activity consisted of data collection, through interviews with LaRC Office of Education and NASA Headquarters staff, university administrators and faculty, and school administrators / teachers; and documentary analysis. Pre-college and university programs were critically reviewed to assure effectiveness, support of NASA and Langley's mission and goals; National Education Goals; and educational reform strategies. In addition to these mandates, pre-college programs were reviewed to address present and future LaRC activities for teacher enhancement and preparation. University programs were reviewed with emphasis on student support and recruitment; faculty development and enhancement; and LaRC's role in promoting the utilization of educational technologies and distance learning. The LaRC Strategic Plan for Education will enable the Office of Education to provide a focused and well planned continuum of education programs for students, teachers and faculty. It will serve to direct and focus present activities and programs while simultaneously offering the flexibility to address new and emerging directions based on changing national, state, and agency trends.
A Formalization of Linkage Analysis
DEFF Research Database (Denmark)
Ingolfsdottir, Anna; Christensen, A.I.; Hansen, Jens A.
In this report a formalization of genetic linkage analysis is introduced. Linkage analysis is a computationally hard biomathematical method, which purpose is to locate genes on the human genome. It is rooted in the new area of bioinformatics and no formalization of the method has previously been ...
Model-Based Systems Engineering Pilot Program at NASA Langley
Vipavetz, Kevin G.; Murphy, Douglas G.; Infeld, Samatha I.
2012-01-01
NASA Langley Research Center conducted a pilot program to evaluate the benefits of using a Model-Based Systems Engineering (MBSE) approach during the early phase of the Materials International Space Station Experiment-X (MISSE-X) project. The goal of the pilot was to leverage MBSE tools and methods, including the Systems Modeling Language (SysML), to understand the net gain of utilizing this approach on a moderate size flight project. The System Requirements Review (SRR) success criteria were used to guide the work products desired from the pilot. This paper discusses the pilot project implementation, provides SysML model examples, identifies lessons learned, and describes plans for further use on MBSE on MISSE-X.
International Nuclear Information System (INIS)
Yavar, A.R.; Sukiman Sarmani; Tan, C.Y.; Rafie, N.N.; Lim, S.W.E.; Khoo, K.S.
2012-01-01
An electronic database has been developed and implemented for K 0 -INAA method in Malaysia. Databases are often developed according to national requirements. This database contains constant nuclear data for k 0 -INAA method. Hogdahl-convention and Westcott-formalism as 3 separate command user interfaces. It has been created using Microsoft Access 2007 under a Windows operating system. This database saves time and the quality of results can be assured when the calculation of neutron flux parameters and concentration of elements by k 0 -INAA method are utilised. An evaluation of the database was conducted by IAEA Soil7 where the results published which showed a high level of consistency. (Author)
NDE research at NASA Langley Research Center
International Nuclear Information System (INIS)
Heyman, J.S.
1989-01-01
The Nondestructive Measurement Science Branch at NASA Langley is the Agency's lead Center for NDE research. The focus of the laboratory is to improve the science base for NDE, evolve a more quantitative, interpretable technology to insure safety and reliability, and transfer that technology to the commercial sector. To address the broad needs of the Agency, the program has developed expertise in many areas, some of which are in ultrasonics, nonlinear acoustics, nano and microstructure characterization, thermal NDE, x-ray tomography, optical fiber sensors, magnetic probing, process monitoring sensors, and image/signal processing. The authors laboratory has recently dedicated its new 20,000 square foot research facility bringing the lab space to 30,000 square feet. The new facility includes a high bay for the x-ray CAT scanner, a revolutionary new concept in materials measurement. The CAT scanner is called QUEST, for quantitative experimental stress tomography lab. This system combines for the first time a microfocus x-ray source and detector with a fatigue load frame. Three dimensional imaging of density/geometry of the tested sample is thus possible during tension/compression loading. This system provides the first 3-D view of crack initiation, crack growth, phase transformation, bonded surface failure, creep-all with a density sensitivity of 0.1% and a resolution of about 25 microns (detectability of about 1 micron)
NAMMA LANGLEY AEROSOL RESEARCH GROUP EXPERIMENT NAVIGATION DATA V1
National Aeronautics and Space Administration — The NAMMA Langley Aerosol Research Group Experiment Navigation Data is the DC-8 NAV data (ICATS) extracted into columns with time correction. These data files were...
The Pedagogical Value of the Lecture Method: The Case of a Non-Formal Education Programme in Ghana
Addae, David; Quan-Baffour, Kofi
2018-01-01
Adult learning rests on the foundation of learner experience and involvement in the teaching and learning process. The methods employed in facilitating adult learning have to a large extent sought to place the learner at the centre of the entire teaching and learning encounter. The lecture method is one of the many methods used to facilitate…
Pingbo, An; Li, Wang; Hongxi, Lu; Zhiguo, Yu; Lei, Liu; Xin, Xi; Lixia, Zhao; Junxi, Wang; Jinmin, Li
2016-06-01
The internal quantum efficiency (IQE) of the light-emitting diodes can be calculated by the ratio of the external quantum efficiency (EQE) and the light extraction efficiency (LEE). The EQE can be measured experimentally, but the LEE is difficult to calculate due to the complicated LED structures. In this work, a model was established to calculate the LEE by combining the transfer matrix formalism and an in-plane ray tracing method. With the calculated LEE, the IQE was determined and made a good agreement with that obtained by the ABC model and temperature-dependent photoluminescence method. The proposed method makes the determination of the IQE more practical and conventional. Project supported by the National Natural Science Foundation of China (Nos.11574306, 61334009), the China International Science and Technology Cooperation Program (No. 2014DFG62280), and the National High Technology Program of China (No. 2015AA03A101).
Riedinger, Kelly; Marbach-Ad, Gili; McGinnis, J. Randy; Hestness, Emily; Pease, Rebecca
2011-01-01
We investigated curricular and pedagogical innovations in an undergraduate science methods course for elementary education majors at the University of Maryland. The goals of the innovative elementary science methods course included: improving students' attitudes toward and views of science and science teaching, to model innovative science teaching…
Experiences From NASA/Langley's DMSS Project
1996-01-01
There is a trend in institutions with high performance computing and data management requirements to explore mass storage systems with peripherals directly attached to a high speed network. The Distributed Mass Storage System (DMSS) Project at the NASA Langley Research Center (LaRC) has placed such a system into production use. This paper will present the experiences, both good and bad, we have had with this system since putting it into production usage. The system is comprised of: 1) National Storage Laboratory (NSL)/UniTree 2.1, 2) IBM 9570 HIPPI attached disk arrays (both RAID 3 and RAID 5), 3) IBM RS6000 server, 4) HIPPI/IPI3 third party transfers between the disk array systems and the supercomputer clients, a CRAY Y-MP and a CRAY 2, 5) a "warm spare" file server, 6) transition software to convert from CRAY's Data Migration Facility (DMF) based system to DMSS, 7) an NSC PS32 HIPPI switch, and 8) a STK 4490 robotic library accessed from the IBM RS6000 block mux interface. This paper will cover: the performance of the DMSS in the following areas: file transfer rates, migration and recall, and file manipulation (listing, deleting, etc.); the appropriateness of a workstation class of file server for NSL/UniTree with LaRC's present storage requirements in mind the role of the third party transfers between the supercomputers and the DMSS disk array systems in DMSS; a detailed comparison (both in performance and functionality) between the DMF and DMSS systems LaRC's enhancements to the NSL/UniTree system administration environment the mechanism for DMSS to provide file server redundancy the statistics on the availability of DMSS the design and experiences with the locally developed transparent transition software which allowed us to make over 1.5 million DMF files available to NSL/UniTree with minimal system outage
Scalable Techniques for Formal Verification
Ray, Sandip
2010-01-01
This book presents state-of-the-art approaches to formal verification techniques to seamlessly integrate different formal verification methods within a single logical foundation. It should benefit researchers and practitioners looking to get a broad overview of the spectrum of formal verification techniques, as well as approaches to combining such techniques within a single framework. Coverage includes a range of case studies showing how such combination is fruitful in developing a scalable verification methodology for industrial designs. This book outlines both theoretical and practical issue
The World Wide Web and Technology Transfer at NASA Langley Research Center
Nelson, Michael L.; Bianco, David J.
1994-01-01
NASA Langley Research Center (LaRC) began using the World Wide Web (WWW) in the summer of 1993, becoming the first NASA installation to provide a Center-wide home page. This coincided with a reorganization of LaRC to provide a more concentrated focus on technology transfer to both aerospace and non-aerospace industry. Use of the WWW and NCSA Mosaic not only provides automated information dissemination, but also allows for the implementation, evolution and integration of many technology transfer applications. This paper describes several of these innovative applications, including the on-line presentation of the entire Technology Opportunities Showcase (TOPS), an industrial partnering showcase that exists on the Web long after the actual 3-day event ended. During its first year on the Web, LaRC also developed several WWW-based information repositories. The Langley Technical Report Server (LTRS), a technical paper delivery system with integrated searching and retrieval, has proved to be quite popular. The NASA Technical Report Server (NTRS), an outgrowth of LTRS, provides uniform access to many logically similar, yet physically distributed NASA report servers. WWW is also the foundation of the Langley Software Server (LSS), an experimental software distribution system which will distribute LaRC-developed software with the possible phase-out of NASA's COSMIC program. In addition to the more formal technology distribution projects, WWW has been successful in connecting people with technologies and people with other people. With the completion of the LaRC reorganization, the Technology Applications Group, charged with interfacing with non-aerospace companies, opened for business with a popular home page.
Formal Testing of Correspondence Carrying Software
Bujorianu, M.C.; Bujorianu, L.M.; Maharaj, S.
2008-01-01
Nowadays formal software development is characterised by use of multitude formal specification languages. Test case generation from formal specifications depends in general on a specific language, and, moreover, there are competing methods for each language. There is a need for a generic approach to
Directory of Open Access Journals (Sweden)
S. Psakhie
2013-04-01
Full Text Available A general approach to realization of models of elasticity, plasticity and fracture of heterogeneous materials within the framework of particle-based numerical methods is proposed in the paper. It is based on building many-body forces of particle interaction, which provide response of particle ensemble correctly conforming to the response (including elastic-plastic behavior and fracture of simulated solids. Implementation of proposed approach within particle-based methods is demonstrated by the example of the movable cellular automaton (MCA method, which integrates the possibilities of particle-based discrete element method (DEM and cellular automaton methods. Emergent advantages of the developed approach to formulation of many-body interaction are discussed. Main of them are its applicability to various realizations of the concept of discrete elements and a possibility to realize various rheological models (including elastic-plastic or visco-elastic-plastic and models of fracture to study deformation and fracture of solid-phase materials and media. Capabilities of particle-based modeling of heterogeneous solids are demonstrated by the problem of simulation of deformation and fracture of particle-reinforced metal-ceramic composites.
Nilsson, Annika; Engström, Maria
2015-05-06
Among staff working in elderly care, a considerable proportion lack formal competence for their work. Lack of formal competence, in turn, has been linked to higher staff ratings of stress symptoms, sleep disturbances and workload. 1) To describe the strengths and weaknesses of an e-assessment and subsequent e-training program used among elderly care staff who lack formal competence and 2) to study the effects of an e-training program on staff members' working life (quality of care and psychological and structural empowerment) and well-being (job satisfaction and psychosomatic health). The hypothesis was that staff who had completed the e-assessment and the e-training program would rate greater improvements in working life and well-being than would staff who had only participated in the e-assessments. An intervention study with a mixed-methods approach using quantitative (2010-2011) and qualitative data (2011) was conducted in Swedish elderly care. Participants included a total of 41 staff members. To describe the strengths and weaknesses of the e-assessment and the e-training program, qualitative data were gathered using semi-structured interviews together with a study-specific questionnaire. To study the effects of the intervention, quantitative data were collected using questionnaires on: job satisfaction, psychosomatic health, psychological empowerment, structural empowerment and quality of care in an intervention and a comparison group. Staff who completed the e-assessments and the e-training program primarily experienced strengths associated with this approach. The results were also in line with our hypotheses: Staff who completed the e-assessment and the e-training program rated improvements in their working life and well-being. Use of the e-assessments and e-training program employed in the present study could be one way to support elderly care staff who lack formal education by increasing their competence; increased competence, in turn, could improve their
NASA Langley/CNU Distance Learning Programs
Caton, Randall; Pinelli, Thomas E.
2002-01-01
NASA Langley Research Center and Christopher Newport University (CNU) provide, free to the public, distance learning programs that focus on math, science, and/or technology over a spectrum of education levels from K-adult. The effort started in 1997, and we currently have a suite of five distance-learning programs. We have around 450,000 registered educators and 12.5 million registered students in 60 countries. Partners and affiliates include the American Institute of Aeronautics and Astronautics (AIAA), the Aerospace Education Coordinating Committee (AECC), the Alliance for Community Media, the National Educational Telecommunications Association, Public Broadcasting System (PBS) affiliates, the NASA Learning Technologies Channel, the National Council of Teachers of Mathematics (NCTM), the Council of the Great City Schools, Hampton City Public Schools, Sea World Adventure Parks, Busch Gardens, ePALS.com, and Riverdeep. Our mission is based on the "Horizon of Learning," a vision for inspiring learning across a continuum of educational experiences. The programs form a continuum of educational experiences for elementary youth through adult learners. The strategic plan for the programs will evolve to reflect evolving national educational needs, changes within NASA, and emerging system initiatives. Plans for each program component include goals, objectives, learning outcomes, and rely on sound business models. It is well documented that if technology is used properly it can be a powerful partner in education. Our programs employ both advances in information technology and in effective pedagogy to produce a broad range of materials to complement and enhance other educational efforts. Collectively, the goals of the five programs are to increase educational excellence; enhance and enrich the teaching of mathematics, science, and technology; increase scientific and technological literacy; and communicate the results of NASA discovery, exploration, innovation and research
Earth Radiation Budget Research at the NASA Langley Research Center
Smith, G. Louis; Harrison, Edwin F.; Gibson, Gary G.
2014-01-01
In the 1970s research studies concentrating on satellite measurements of Earth's radiation budget started at the NASA Langley Research Center. Since that beginning, considerable effort has been devoted to developing measurement techniques, data analysis methods, and time-space sampling strategies to meet the radiation budget science requirements for climate studies. Implementation and success of the Earth Radiation Budget Experiment (ERBE) and the Clouds and the Earth's Radiant Energy System (CERES) was due to the remarkable teamwork of many engineers, scientists, and data analysts. Data from ERBE have provided a new understanding of the effects of clouds, aerosols, and El Nino/La Nina oscillation on the Earth's radiation. CERES spacecraft instruments have extended the time coverage with high quality climate data records for over a decade. Using ERBE and CERES measurements these teams have created information about radiation at the top of the atmosphere, at the surface, and throughout the atmosphere for a better understanding of our climate. They have also generated surface radiation products for designers of solar power plants and buildings and numerous other applications
Teams and teamwork at NASA Langley Research Center
Dickinson, Terry L.
1994-01-01
The recent reorganization and shift to managing total quality at the NASA Langley Research Center (LaRC) has placed an increasing emphasis on teams and teamwork in accomplishing day-to-day work activities and long-term projects. The purpose of this research was to review the nature of teams and teamwork at LaRC. Models of team performance and teamwork guided the gathering of information. Current and former team members served as participants; their collective experience reflected membership in over 200 teams at LaRC. The participants responded to a survey of open-ended questions which assessed various aspects of teams and teamwork. The participants also met in a workshop to clarify and elaborate on their responses. The work accomplished by the teams ranged from high-level managerial decision making (e.g., developing plans for LaRC reorganization) to creating scientific proposals (e.g., describing spaceflight projects to be designed, sold, and built). Teams typically had nine members who remained together for six months. Member turnover was around 20 percent; this turnover was attributed to heavy loads of other work assignments and little formal recognition and reward for team membership. Team members usually shared a common and valued goal, but there was not a clear standard (except delivery of a document) for knowing when the goal was achieved. However, members viewed their teams as successful. A major factor in team success was the setting of explicit a priori rules for communication. Task interdependencies between members were not complex (e.g., sharing of meeting notes and ideas about issues), except between members of scientific teams (i.e., reliance on the expertise of others). Thus, coordination of activities usually involved scheduling and attendance of team meetings. The team leader was designated by the team's sponsor. This leader usually shared power and responsibilities with other members, such that team members established their own operating
Directory of Open Access Journals (Sweden)
Douglas Walton
2015-12-01
Full Text Available This paper presents a formalization of informal logic using the Carneades Argumentation System (CAS, a formal, computational model of argument that consists of a formal model of argument graphs and audiences. Conflicts between pro and con arguments are resolved using proof standards, such as preponderance of the evidence. CAS also formalizes argumentation schemes. Schemes can be used to check whether a given argument instantiates the types of argument deemed normatively appropriate for the type of dialogue.
Pragmatics for formal semantics
DEFF Research Database (Denmark)
Danvy, Olivier
2011-01-01
This tech talk describes how to write and how to inter-derive formal semantics for sequential programming languages. The progress reported here is (1) concrete guidelines to write each formal semantics to alleviate their proof obligations, and (2) simple calculational tools to obtain a formal...
Energy Technology Data Exchange (ETDEWEB)
Meyer, L.; Witzel, G.; Ghez, A. M. [Department of Physics and Astronomy, University of California, Los Angeles, CA 90095-1547 (United States); Longstaff, F. A. [UCLA Anderson School of Management, University of California, Los Angeles, CA 90095-1481 (United States)
2014-08-10
Continuously time variable sources are often characterized by their power spectral density and flux distribution. These quantities can undergo dramatic changes over time if the underlying physical processes change. However, some changes can be subtle and not distinguishable using standard statistical approaches. Here, we report a methodology that aims to identify distinct but similar states of time variability. We apply this method to the Galactic supermassive black hole, where 2.2 μm flux is observed from a source associated with Sgr A* and where two distinct states have recently been suggested. Our approach is taken from mathematical finance and works with conditional flux density distributions that depend on the previous flux value. The discrete, unobserved (hidden) state variable is modeled as a stochastic process and the transition probabilities are inferred from the flux density time series. Using the most comprehensive data set to date, in which all Keck and a majority of the publicly available Very Large Telescope data have been merged, we show that Sgr A* is sufficiently described by a single intrinsic state. However, the observed flux densities exhibit two states: noise dominated and source dominated. Our methodology reported here will prove extremely useful to assess the effects of the putative gas cloud G2 that is on its way toward the black hole and might create a new state of variability.
Stökl, A.
2008-11-01
Context: In spite of all the advances in multi-dimensional hydrodynamics, investigations of stellar evolution and stellar pulsations still depend on one-dimensional computations. This paper devises an alternative to the mixing-length theory or turbulence models usually adopted in modelling convective transport in such studies. Aims: The present work attempts to develop a time-dependent description of convection, which reflects the essential physics of convection and that is only moderately dependent on numerical parameters and far less time consuming than existing multi-dimensional hydrodynamics computations. Methods: Assuming that the most extensive convective patterns generate the majority of convective transport, the convective velocity field is described using two parallel, radial columns to represent up- and downstream flows. Horizontal exchange, in the form of fluid flow and radiation, over their connecting interface couples the two columns and allows a simple circulating motion. The main parameters of this convective description have straightforward geometrical meanings, namely the diameter of the columns (corresponding to the size of the convective cells) and the ratio of the cross-section between up- and downdrafts. For this geometrical setup, the time-dependent solution of the equations of radiation hydrodynamics is computed from an implicit scheme that has the advantage of being unaffected by the Courant-Friedrichs-Lewy time-step limit. This implementation is part of the TAPIR-Code (short for The adaptive, implicit RHD-Code). Results: To demonstrate the approach, results for convection zones in Cepheids are presented. The convective energy transport and convective velocities agree with expectations for Cepheids and the scheme reproduces both the kinetic energy flux and convective overshoot. A study of the parameter influence shows that the type of solution derived for these stars is in fact fairly robust with respect to the constitutive numerical
Kim, Changhwa; Shin, DongHyun
2017-05-12
There are wireless networks in which typically communications are unsafe. Most terrestrial wireless sensor networks belong to this category of networks. Another example of an unsafe communication network is an underwater acoustic sensor network (UWASN). In UWASNs in particular, communication failures occur frequently and the failure durations can range from seconds up to a few hours, days, or even weeks. These communication failures can cause data losses significant enough to seriously damage human life or property, depending on their application areas. In this paper, we propose a framework to reduce sensor data loss during communication failures and we present a formal approach to the Selection by Minimum Error and Pattern (SMEP) method that plays the most important role for the reduction in sensor data loss under the proposed framework. The SMEP method is compared with other methods to validate its effectiveness through experiments using real-field sensor data sets. Moreover, based on our experimental results and performance comparisons, the SMEP method has been validated to be better than others in terms of the average sensor data value error rate caused by sensor data loss.
Directory of Open Access Journals (Sweden)
Elena Solana-Arellano
2008-09-01
Full Text Available Seagrass beds provide much of the primary production in estuaries; host many fishes and fish larvae, and abate erosion. The present study presents original analytical methods for estimating mean leaf-growth rates of eelgrass (Zostera marina. The method was calibrated by using data collected in a Z. marina meadow at Punta Banda estuary in Baja California, Mexico. The analytical assessments were based on measurements of leaf length and standard regression procedures. We present a detailed explanation of the formal procedures involved in the derivation of these analytical methods. The measured daily leaf-growth rate was 10.9 mm d-1 leaf-1. The corresponding value projected by our method was 10.2 mm d-1 leaf-1. The associated standard errors were of 0.53 and 0.56 mm d-1 leaf-1 respectively. The method was validated by projecting leaf-growth rates from an independent data set, which gave consistent results. The use of the method to obtain the mean leaf growth rate of a transplanted plot is also illustrated. Comparison of our leaf-growth data with previously reported assessments show the significant forcing of sea-surface temperature on eelgrass leaf dynamics. The formal constructs provided here are of general scope and can be applied to equivalent eelgrass data sets in a straightforward manner. Rev. Biol. Trop. 56 (3: 1003-1013. Epub 2008 September 30.Las praderas de pastos marinos abaten la erosión y aportan gran parte de la productividad primaria de los esteros y son refugio de muchos peces y sus larvas. El presente trabajo introduce métodos analíticos para estimar las tasas medias de crecimiento foliar de Zostera marina L. y sus varianzas. La calibración del método se llevó a cabo utilizando datos de una pradera de esta fanerógama en el Estero de Punta Banda Baja California, México. Las referidas estimaciones analíticas, se basan en medias de longitud foliar y en procedimientos estandarizados de regresión. Dichas determinaciones son por
Survey of Existing Tools for Formal Verification.
Energy Technology Data Exchange (ETDEWEB)
Punnoose, Ratish J.; Armstrong, Robert C.; Wong, Matthew H.; Jackson, Mayo
2014-12-01
Formal methods have come into wide use because of their effectiveness in verifying "safety and security" requirements of digital systems; a set of requirements for which testing is mostly ineffective. Formal methods are routinely used in the design and verification of high-consequence digital systems in industry. This report outlines our work in assessing the capabilities of commercial and open source formal tools and the ways in which they can be leveraged in digital design workflows.
DEFF Research Database (Denmark)
du Gay, Paul; Lopdrup-Hjorth, Thomas
Over recent decades, institutions exhibiting high degrees of formality have come in for severe criticism. From the private to the public sector, and across a whole spectrum of actors spanning from practitioners to academics, formal organization is viewed with increasing doubt and skepticism....... In a “Schumpetarian world” (Teece et al., 1997: 509) of dynamic competition and incessant reform, formal organization appears as well suited to survival as a fish out of water. Indeed, formal organization, and its closely overlapping semantic twin bureaucracy, are not only represented as ill suited to the realities...... is that formal organization is an obstacle to be overcome. For that very reason, critics, intellectuals and reformers alike have urged public and private organizations to break out of the stifling straightjacket of formality, to dispense with bureaucracy, and to tear down hierarchies. This could either be done...
ADVANCED COMPOSITES TECHNOLOGY CASE STUDY AT NASA LANGLEY RESEARCH CENTER
This report summarizes work conducted at the National Aeronautics and Space Administration's Langley Research Center (NASA-LaRC) in Hampton, VA, under the U.S. Environmental Protection Agency’s (EPA) Waste Reduction Evaluations at Federal Sites (WREAFS) Program. Support for...
Integrating semi-formal and formal requirements
Wieringa, Roelf J.; Olivé, Antoni; Dubois, Eric; Pastor, Joan Antoni; Huyts, Sander
1997-01-01
In this paper, we report on the integration of informal, semiformal and formal requirements specification techniques. We present a framework for requirements specification called TRADE, within which several well-known semiformal specification techniques are placed. TRADE is based on an analysis of
Informal work and formal plans
DEFF Research Database (Denmark)
Dalsted, Rikke Juul; Hølge-Hazelton, Bibi; Kousgaard, Marius Brostrøm
2012-01-01
INTRODUCTION: Formal pathways models outline that patients should receive information in order to experience a coherent journey but do not describe an active role for patients or their relatives. The aim of this is paper is to articulate and discuss the active role of patients during their cancer...... trajectories. METHODS AND THEORY: An in-depth case study of patient trajectories at a Danish hospital and surrounding municipality using individual interviews with patients. Theory about trajectory and work by Strauss was included. RESULTS: Patients continuously took initiatives to organize their treatment....... The patients' requests were not sufficiently supported in the professional organisation of work or formal planning. Patients' insertion and use of information in their trajectories challenged professional views and working processes. And the design of the formal pathway models limits the patients' active...
DEFF Research Database (Denmark)
Garsten, Christina; Nyqvist, Anette
Ethnographic work in formal organizations involves learning to recognize the many layers of front stage and back stage of organized life, and to bracket formality. It means to be alert to the fact that what is formal and front stage for one some actors, and in some situations, may in fact be back...... stage and informal for others. Walking the talk, donning the appropriate attire, wearing the proper suit, may be part of what is takes to figure out the code of formal organizational settings – an entrance ticket to the backstage, as it were. Oftentimes, it involves a degree of mimicry, of ‘following...... suits’ (Nyqvist 2013), and of doing ‘ethnography by failure’ (Garsten 2013). In this paper, we explore the layers of informality and formality in our fieldwork experiences among financial investors and policy experts, and discuss how to ethnographically represent embodied fieldwork practices. How do we...
An Overview of Innovative Strategies for Fracture Mechanics at NASA Langley Research Center
Ransom, Jonathan B.; Glaessgen, Edward H.; Ratcliffe, James G.
2010-01-01
Engineering fracture mechanics has played a vital role in the development and certification of virtually every aerospace vehicle that has been developed since the mid-20th century. NASA Langley Research Center s Durability, Damage Tolerance and Reliability Branch has contributed to the development and implementation of many fracture mechanics methods aimed at predicting and characterizing damage in both metallic and composite materials. This paper presents a selection of computational, analytical and experimental strategies that have been developed by the branch for assessing damage growth under monotonic and cyclic loading and for characterizing the damage tolerance of aerospace structures
Necessity of Integral Formalism
International Nuclear Information System (INIS)
Tao Yong
2011-01-01
To describe the physical reality, there are two ways of constructing the dynamical equation of field, differential formalism and integral formalism. The importance of this fact is firstly emphasized by Yang in case of gauge field [Phys. Rev. Lett. 33 (1974) 445], where the fact has given rise to a deeper understanding for Aharonov-Bohm phase and magnetic monopole [Phys. Rev. D 12 (1975) 3845]. In this paper we shall point out that such a fact also holds in general wave function of matter, it may give rise to a deeper understanding for Berry phase. Most importantly, we shall prove a point that, for general wave function of matter, in the adiabatic limit, there is an intrinsic difference between its integral formalism and differential formalism. It is neglect of this difference that leads to an inconsistency of quantum adiabatic theorem pointed out by Marzlin and Sanders [Phys. Rev. Lett. 93 (2004) 160408]. It has been widely accepted that there is no physical difference of using differential operator or integral operator to construct the dynamical equation of field. Nevertheless, our study shows that the Schrödinger differential equation (i.e., differential formalism for wave function) shall lead to vanishing Berry phase and that the Schrödinger integral equation (i.e., integral formalism for wave function), in the adiabatic limit, can satisfactorily give the Berry phase. Therefore, we reach a conclusion: There are two ways of describing physical reality, differential formalism and integral formalism; but the integral formalism is a unique way of complete description. (general)
A Mathematical Formalization Proposal for Business Growth
Directory of Open Access Journals (Sweden)
Gheorghe BAILESTEANU
2013-01-01
Full Text Available Economic sciences have known a spectacular evolution in the last century; beginning to use axiomatic methods, applying mathematical instruments as a decision-making tool. The quest to formalization needs to be addressed from various different angles, reducing entry and operating formal costs, increasing the incentives for firms to operate formally, reducing obstacles to their growth, and searching for inexpensive approaches through which to enforce compliancy with government regulations. This paper proposes a formalized approach to business growth, based on mathematics and logics, taking into consideration the particularities of the economic sector.
DEFF Research Database (Denmark)
Levinsen, Karin Tweddell; Sørensen, Birgitte Holm
2013-01-01
are examined and the relation between network society competences, learners’ informal learning strategies and ICT in formalized school settings over time is studied. The authors find that aspects of ICT like multimodality, intuitive interaction design and instant feedback invites an informal bricoleur approach....... When integrated into certain designs for teaching and learning, this allows for Formalized Informal Learning and support is found for network society competences building....
Integrated formal operations plan
Energy Technology Data Exchange (ETDEWEB)
Cort, G.; Dearholt, W.; Donahue, S.; Frank, J.; Perkins, B.; Tyler, R.; Wrye, J.
1994-01-05
The concept of formal operations (that is, a collection of business practices to assure effective, accountable operations) has vexed the Laboratory for many years. To date most attempts at developing such programs have been based upon rigid, compliance-based interpretations of a veritable mountain of Department of Energy (DOE) orders, directives, notices, and standards. These DOE dictates seldom take the broad view but focus on highly specialized programs isolated from the overall context of formal operations. The result is a confusing array of specific, and often contradictory, requirements that produce a patchwork of overlapping niche programs. This unnecessary duplication wastes precious resources, dramatically increases the complexity of our work processes, and communicates a sense of confusion to our customers and regulators. Coupled with the artificial divisions that have historically existed among the Laboratory`s formal operations organizations (quality assurance, configuration management, records management, training, etc.), this approach has produced layers of increasingly vague and complex formal operations plans, each of which interprets its parent and adds additional requirements of its own. Organizational gridlock ensues whenever an activity attempts to implement these bureaucratic monstrosities. The integrated formal operations plan presented is to establish a set of requirements that must be met by an integrated formal operations program, assign responsibilities for implementation and operation of the program, and specify criteria against which the performance of the program will be measured. The accountable line manager specifies the items, processes, and information (the controlled elements) to which the formal operations program specified applies. The formal operations program is implemented using a graded approach based on the level of importance of the various controlled elements and the scope of the activities in which they are involved.
Formal Engineering Hybrid Systems: Semantic Underpinnings
Bujorianu, M.C.; Bujorianu, L.M.
2008-01-01
In this work we investigate some issues in applying formal methods to hybrid system development and develop a categorical framework. We study the themes of stochastic reasoning, heterogeneous formal specification and retrenchment. Hybrid systems raise a rich pallets of aspects that need to be
Methodological imperfection and formalizations in scientific activity
International Nuclear Information System (INIS)
Svetlichny, G.
1987-01-01
Any mathematical formalization of scientific activity allows for imperfections in the methodology that is formalized. These can be of three types, dirty, rotten, and dammed. Restricting mathematical attention to those methods that cannot be construed to be imperfect drastically reduces the class of objects that must be analyzed, and related all other objects to these more regular ones. Examples are drawn from empirical logic
Stroh formalism and Rayleigh waves
Tanuma, Kazumi
2008-01-01
Introduces a powerful and elegant mathematical method for the analysis of anisotropic elasticity equationsThe reader can grasp the essentials as quickly as possibleCan be used as a textbook, which presents compactly introduction and applications of the Stroh formalismAppeals to the people not only in mathematics but also in mechanics and engineering sciencePrerequisites are only basic linear algebra, calculus and fundamentals of differential equations
Variational formalism for spin particles
International Nuclear Information System (INIS)
Horvathy, P.
1977-11-01
The geometrical formulation of Hamilton's principle presented in a previous paper has been related to the usual one in terms of Lagrangian functions. The exact conditions for their equivalence are obtained and a method is given for the construction of a Lagrangian function. The formalism is extended to spin particles and a local Lagrangian is constructed in this case, too. However, this function cannot be extended to a global one. (D.P.)
Ayivor, J. E.; Okine, L. K. N.; Dampare, S. B.; Nyarko, B. J. B.; Debrah, S. K.
2012-04-01
The epithermal neutron shape factor, α of the inner and outer irradiation sites of the Ghana Research Reactor-1 (GHARR-1) was determined obtaining results of 0.105 for the inner (Channel 1) Irradiation site and 0.020 for the outer (channel 6) irradiation site. The neutron temperatures for the inner and outer irradiation sites were 27 °C and 20 °C, respectively. The α values used in Westcott Formalism k0 INAA was applied to determine multi elements in 13 Ghanaian herbal medicines used by the Centre for Scientific Research into Plant Medicine (CSRPM) for the management of various diseases complemented by Atomic Absorption Spectrometry. They are namely Mist. Antiaris, Mist. Enterica, Mist. Morazia, Mist. Nibima, Mist. Modium, Mist. Ninger, Mist Sodenia, Mist. Tonica, Chardicca Powder, Fefe Powder, Olax Powder, Sirrapac powder and Lippia Tea. Concentrations of Al, As, Br, K, Cl, Cu, Mg, Mn, Na and V were determined by short and medium irradiations at a thermal neutron flux of 5×1011 ncm-2 s-1. Fe, Cr, Pb, Co, Ni, Sn, Ca, Ba, Li and Sb were determined using Atomic Absorption Spectrometry (AAS). Ba, Cu, Li and V were present at trace levels whereas Al, Cl, Na, Ca were present at major levels. K, Br, Mg, Mn, Co, Ni, Fe and Sb were also present at minor levels. Arsenic was not detected in all samples. Standard Reference material, IAEA-V-10 Hay Powder was simultaneously analysed with samples. The precision and accuracy of the method using real samples and standard reference materials were evaluated and within ±10% of the reported value. Multivariate analytical techniques, such as cluster analysis (Q-mode and R-mode CA) and principal component analysis (PCA)/factor analysis (FA), have been applied to evaluate the chemical variations in the herbal medicine dataset. All the 13 samples may be grouped into 2 statistically significant clusters (liquid based and powdered herbal medicines), reflecting the different chemical compositions. R-mode CA and PCA suggest common
Formalizing Probabilistic Safety Claims
Herencia-Zapana, Heber; Hagen, George E.; Narkawicz, Anthony J.
2011-01-01
A safety claim for a system is a statement that the system, which is subject to hazardous conditions, satisfies a given set of properties. Following work by John Rushby and Bev Littlewood, this paper presents a mathematical framework that can be used to state and formally prove probabilistic safety claims. It also enables hazardous conditions, their uncertainties, and their interactions to be integrated into the safety claim. This framework provides a formal description of the probabilistic composition of an arbitrary number of hazardous conditions and their effects on system behavior. An example is given of a probabilistic safety claim for a conflict detection algorithm for aircraft in a 2D airspace. The motivation for developing this mathematical framework is that it can be used in an automated theorem prover to formally verify safety claims.
Informal work and formal plans
DEFF Research Database (Denmark)
Dalsted, Rikke Juul; Hølge-Hazelton, Bibi; Kousgaard, Marius Brostrøm
2012-01-01
trajectories. METHODS AND THEORY: An in-depth case study of patient trajectories at a Danish hospital and surrounding municipality using individual interviews with patients. Theory about trajectory and work by Strauss was included. RESULTS: Patients continuously took initiatives to organize their treatment...... and care. They initiated processes in the trajectories, and acquired information, which they used to form their trajectories. Patients presented problems to the healthcare professionals in order to get proper help when needed. DISCUSSION: Work done by patients was invisible and not perceived as work....... The patients' requests were not sufficiently supported in the professional organisation of work or formal planning. Patients' insertion and use of information in their trajectories challenged professional views and working processes. And the design of the formal pathway models limits the patients' active...
Polynomials formalism of quantum numbers
International Nuclear Information System (INIS)
Kazakov, K.V.
2005-01-01
Theoretical aspects of the recently suggested perturbation formalism based on the method of quantum number polynomials are considered in the context of the general anharmonicity problem. Using a biatomic molecule by way of example, it is demonstrated how the theory can be extrapolated to the case of vibrational-rotational interactions. As a result, an exact expression for the first coefficient of the Herman-Wallis factor is derived. In addition, the basic notions of the formalism are phenomenologically generalized and expanded to the problem of spin interaction. The concept of magneto-optical anharmonicity is introduced. As a consequence, an exact analogy is drawn with the well-known electro-optical theory of molecules, and a nonlinear dependence of the magnetic dipole moment of the system on the spin and wave variables is established [ru
Methodology of formal software evaluation
International Nuclear Information System (INIS)
Tuszynski, J.
1998-01-01
Sydkraft AB, the major Swedish utility, owner of ca 6000 MW el installed in nuclear (NPP Barsebaeck and NPP Oskarshamn), fossil fuel and hydro Power Plants is facing modernization of the control systems of the plants. Standards applicable require structured, formal methods for implementation of the control functions in the modem, real time software systems. This presentation introduces implementation methodology as discussed presently at the Sydkraft organisation. The approach suggested is based upon the process of co-operation of three parties taking part in the implementation; owner of the plant, vendor and Quality Assurance (QA) organisation. QA will be based on tools for formal software validation and on systematic gathering by the owner of validated and proved-by-operation control modules for the concern-wide utilisation. (author)
NASA Langley Research Center outreach in astronautical education
Duberg, J. E.
1976-01-01
The Langley Research Center has traditionally maintained an active relationship with the academic community, especially at the graduate level, to promote the Center's research program and to make graduate education available to its staff. Two new institutes at the Center - the Joint Institute for Acoustics and Flight Sciences, and the Institute for Computer Applications - are discussed. Both provide for research activity at the Center by university faculties. The American Society of Engineering Education Summer Faculty Fellowship Program and the NASA-NRC Postdoctoral Resident Research Associateship Program are also discussed.
User's Manual for the Langley Aerothermodynamic Upwind Relaxation Algorithm (LAURA)
Gnoffo, Peter A.; Cheatwood, F. McNeil
1996-01-01
This user's manual provides detailed instructions for the installation and the application of version 4.1 of the Langley Aerothermodynamic Upwind Relaxation Algorithm (LAURA). Also provides simulation of flow field in thermochemical nonequilibrium around vehicles traveling at hypersonic velocities through the atmosphere. Earlier versions of LAURA were predominantly research codes, and they had minimal (or no) documentation. This manual describes UNIX-based utilities for customizing the code for special applications that also minimize system resource requirements. The algorithm is reviewed, and the various program options are related to specific equations and variables in the theoretical development.
DEFF Research Database (Denmark)
du Gay, Paul; Lopdrup-Hjorth, Thomas
2016-01-01
term this ‘fear of the formal’, outlining key elements of its genealogy and exploring its contemporary manifestation in relation to recent and ongoing reforms of organisational life in a range of contexts. At the same time, we seek to indicate the continuing constitutive significance of formality...
Formalization of Medical Guidelines
Czech Academy of Sciences Publication Activity Database
Peleška, Jan; Anger, Z.; Buchtela, David; Šebesta, K.; Tomečková, Marie; Veselý, Arnošt; Zvára, K.; Zvárová, Jana
2005-01-01
Roč. 1, - (2005), s. 133-141 ISSN 1801-5603 R&D Projects: GA AV ČR 1ET200300413 Institutional research plan: CEZ:AV0Z10300504 Keywords : GLIF model * formalization of guidelines * prevention of cardiovascular diseases Subject RIV: IN - Informatics, Computer Science
Readings in Formal Epistemology
DEFF Research Database (Denmark)
‘Formal epistemology’ is a term coined in the late 1990s for a new constellation of interests in philosophy,the roots of which are found in earlier works of epistemologists, philosophers of science, and logicians. It addresses a growing agenda of problems concerning knowledge, belief, certainty, ...
Criteria for logical formalization
Czech Academy of Sciences Publication Activity Database
Peregrin, Jaroslav; Svoboda, Vladimír
2013-01-01
Roč. 190, č. 14 (2013), s. 2897-2924 ISSN 0039-7857 R&D Projects: GA ČR(CZ) GAP401/10/1279 Institutional support: RVO:67985955 Keywords : logic * logical form * formalization * reflective equilibrium Subject RIV: AA - Philosophy ; Religion Impact factor: 0.637, year: 2013
DEFF Research Database (Denmark)
Rand, John; Torm, Nina Elisabeth
2012-01-01
Based on unique panel data consisting of both formal and informal firms, this paper uses a matched double difference approach to examine the relationship between legal status and firm level outcomes in micro, small and medium manufacturing enterprises (SMEs) in Vietnam. Controlling for determinin...
International Nuclear Information System (INIS)
Ayivor, J.E.; Okine, L.K.N.; Dampare, S.B.; Nyarko, B.J.B.; Debrah, S.K.
2012-01-01
The epithermal neutron shape factor, α of the inner and outer irradiation sites of the Ghana Research Reactor-1 (GHARR-1) was determined obtaining results of 0.105 for the inner (Channel 1) Irradiation site and 0.020 for the outer (channel 6) irradiation site. The neutron temperatures for the inner and outer irradiation sites were 27 °C and 20 °C, respectively. The α values used in Westcott Formalism k 0 INAA was applied to determine multi elements in 13 Ghanaian herbal medicines used by the Centre for Scientific Research into Plant Medicine (CSRPM) for the management of various diseases complemented by Atomic Absorption Spectrometry. They are namely Mist. Antiaris, Mist. Enterica, Mist. Morazia, Mist. Nibima, Mist. Modium, Mist. Ninger, Mist Sodenia, Mist. Tonica, Chardicca Powder, Fefe Powder, Olax Powder, Sirrapac powder and Lippia Tea. Concentrations of Al, As, Br, K, Cl, Cu, Mg, Mn, Na and V were determined by short and medium irradiations at a thermal neutron flux of 5×10 11 ncm −2 s −1 . Fe, Cr, Pb, Co, Ni, Sn, Ca, Ba, Li and Sb were determined using Atomic Absorption Spectrometry (AAS). Ba, Cu, Li and V were present at trace levels whereas Al, Cl, Na, Ca were present at major levels. K, Br, Mg, Mn, Co, Ni, Fe and Sb were also present at minor levels. Arsenic was not detected in all samples. Standard Reference material, IAEA-V-10 Hay Powder was simultaneously analysed with samples. The precision and accuracy of the method using real samples and standard reference materials were evaluated and within ±10% of the reported value. Multivariate analytical techniques, such as cluster analysis (Q-mode and R-mode CA) and principal component analysis (PCA)/factor analysis (FA), have been applied to evaluate the chemical variations in the herbal medicine dataset. All the 13 samples may be grouped into 2 statistically significant clusters (liquid based and powdered herbal medicines), reflecting the different chemical compositions. R-mode CA and PCA suggest
A future perspective on technological obsolescenceat NASA, Langley Research Center
Mcintyre, Robert M.
1990-01-01
The present research effort was the first phase of a study to forecast whether technological obsolescence will be a problem for the engineers, scientists, and technicians at NASA Langley Research Center (LaRC). There were four goals of the research: to review the literature on technological obsolescence; to determine through interviews of division chiefs and branch heads Langley's perspective on future technological obsolescence; to begin making contacts with outside industries to find out how they view the possibility of technological obsolescence; and to make preliminary recommendations for dealing with the problem. A complete description of the findings of this research can be reviewed in a technical report in preparation. The following are a small subset of the key findings of the study: NASA's centers and divisions vary in their missions and because of this, in their capability to control obsolescence; research-oriented organizations within NASA are believed by respondents to keep up to date more than the project-oriented organizations; asked what are the signs of a professional's technological obsolescence, respondents had a variety of responses; top performing scientists were viewed as continuous learners, keeping up to date by a variety of means; when asked what incentives were available to aerospace technologists for keeping up to data, respondents specified a number of ideas; respondents identified many obstacles to professionals' keeping up to date in the future; and most respondents expressed some concern for the future of the professionals at NASA vis a vis the issue of professional obsolescence.
The sacral autonomic outflow is parasympathetic: Langley got it right.
Horn, John P
2018-04-01
A recent developmental study of gene expression by Espinosa-Medina, Brunet and colleagues sparked controversy by asserting a revised nomenclature for divisions of the autonomic motor system. Should we re-classify the sacral autonomic outflow as sympathetic, as now suggested, or does it rightly belong to the parasympathetic system, as defined by Langley nearly 100 years ago? Arguments for rejecting Espinosa-Medina, Brunet et al.'s scheme subsequently appeared in e-letters and brief reviews. A more recent commentary in this journal by Brunet and colleagues responded to these criticisms by labeling Langley's scheme as a historical myth perpetuated by ignorance. In reaction to this heated exchange, I now examine both sides to the controversy, together with purported errors by the pioneers in the field. I then explain, once more, why the sacral outflow should remain known as parasympathetic, and outline suggestions for future experimentation to advance the understanding of cellular identity in the autonomic motor system.
Formal Analysis Of Use Case Diagrams
Directory of Open Access Journals (Sweden)
Radosław Klimek
2010-01-01
Full Text Available Use case diagrams play an important role in modeling with UML. Careful modeling is crucialin obtaining a correct and efficient system architecture. The paper refers to the formalanalysis of the use case diagrams. A formal model of use cases is proposed and its constructionfor typical relationships between use cases is described. Two methods of formal analysis andverification are presented. The first one based on a states’ exploration represents a modelchecking approach. The second one refers to the symbolic reasoning using formal methodsof temporal logic. Simple but representative example of the use case scenario verification isdiscussed.
Towards Formal Implementation of PUS Standard
Ilić, D.
2009-05-01
As an effort to promote the reuse of on-board and ground systems ESA developed a standard for packet telemetry and telecommand - PUS. It defines a set of standard service models with the corresponding structures of the associated telemetry and telecommand packets. Various missions then can choose to implement those standard PUS services that best conform to their specific requirements. In this paper we propose a formal development (based on the Event-B method) of reusable service patterns, which can be instantiated for concrete application. Our formal models allow us to formally express and verify specific service properties including various telecommand and telemetry packet structure validation.
Toward a formal ontology for narrative
Directory of Open Access Journals (Sweden)
Ciotti, Fabio
2016-03-01
Full Text Available In this paper the rationale and the first draft of a formal ontology for modeling narrative texts are presented. Building on the semiotic and structuralist narratology, and on the work carried out in the late 1980s by Giuseppe Gigliozzi in Italy, the focus of my research are the concepts of character and of narrative world/space. This formal model is expressed in the OWL 2 ontology language. The main reason to adopt a formal modeling approach is that I consider the purely probabilistic-quantitative methods (now widespread in digital literary studies inadequate. An ontology, on one hand provides a tool for the analysis of strictly literary texts. On the other hand (though beyond the scope of the present work, its formalization can also represent a significant contribution towards grounding the application of storytelling methods outside of scholarly contexts.
An approach of requirements tracing in formal refinement
DEFF Research Database (Denmark)
Jastram, Michael; Hallerstede, Stefan; Leuschel, Michael
2010-01-01
Formal modeling of computing systems yields models that are intended to be correct with respect to the requirements that have been formalized. The complexity of typical computing systems can be addressed by formal refinement introducing all the necessary details piecemeal. We report on preliminar...... changes, making use of corresponding techniques already built into the Event-B method....
Young People, Entrepreneurship And Non Formal Learning
Pantea, Maria-Carmen; Diroescu, Raluca; Podlasek-Ziegler, Maria
2016-01-01
The book was published by SALTO-Youth Participation, a Resource Centre of the European Commission. It looks into the relationship between youth work (non-formal learning) and entrepreneurship. The book explores the theoretical developments in the field, the ethical dilemmas and tensions, and proposes practice-oriented information: illustrative examples, strategies for action and methods of non-formal education. Structured in 24 chapters, the book is an opportunity to open up debates and quest...
Recent Advances in Durability and Damage Tolerance Methodology at NASA Langley Research Center
Ransom, J. B.; Glaessgen, E. H.; Raju, I. S.; Harris, C. E.
2007-01-01
Durability and damage tolerance (D&DT) issues are critical to the development of lighter, safer and more efficient aerospace vehicles. Durability is largely an economic life-cycle design consideration whereas damage tolerance directly addresses the structural airworthiness (safety) of the vehicle. Both D&DT methodologies must address the deleterious effects of changes in material properties and the initiation and growth of damage that may occur during the vehicle s service lifetime. The result of unanticipated D&DT response is often manifested in the form of catastrophic and potentially fatal accidents. As such, durability and damage tolerance requirements must be rigorously addressed for commercial transport aircraft and NASA spacecraft systems. This paper presents an overview of the recent and planned future research in durability and damage tolerance analytical and experimental methods for both metallic and composite aerospace structures at NASA Langley Research Center (LaRC).
Formal verification of industrial control systems
CERN. Geneva
2015-01-01
Verification of critical software is a high priority but a challenging task for industrial control systems. For many kinds of problems, testing is not an efficient method. Formal methods, such as model checking appears to be an appropriate complementary method. However, it is not common to use model checking in industry yet, as this method needs typically formal methods expertise and huge computing power. In the EN-ICE-PLC section, we are working on a [methodology][1] and a tool ([PLCverif][2]) to overcome these challenges and to integrate formal verification in the development process of our PLC-based control systems. [1]: http://cern.ch/project-plc-formalmethods [2]: http://cern.ch/plcverif
Fluid dynamics parallel computer development at NASA Langley Research Center
Townsend, James C.; Zang, Thomas A.; Dwoyer, Douglas L.
1987-01-01
To accomplish more detailed simulations of highly complex flows, such as the transition to turbulence, fluid dynamics research requires computers much more powerful than any available today. Only parallel processing on multiple-processor computers offers hope for achieving the required effective speeds. Looking ahead to the use of these machines, the fluid dynamicist faces three issues: algorithm development for near-term parallel computers, architecture development for future computer power increases, and assessment of possible advantages of special purpose designs. Two projects at NASA Langley address these issues. Software development and algorithm exploration is being done on the FLEX/32 Parallel Processing Research Computer. New architecture features are being explored in the special purpose hardware design of the Navier-Stokes Computer. These projects are complementary and are producing promising results.
Technical Reports: Langley Aerospace Research Summer Scholars. Part 1
Schwan, Rafaela (Compiler)
1995-01-01
The Langley Aerospace Research Summer Scholars (LARSS) Program was established by Dr. Samuel E. Massenberg in 1986. The program has increased from 20 participants in 1986 to 114 participants in 1995. The program is LaRC-unique and is administered by Hampton University. The program was established for the benefit of undergraduate juniors and seniors and first-year graduate students who are pursuing degrees in aeronautical engineering, mechanical engineering, electrical engineering, material science, computer science, atmospheric science, astrophysics, physics, and chemistry. Two primary elements of the LARSS Program are: (1) a research project to be completed by each participant under the supervision of a researcher who will assume the role of a mentor for the summer, and (2) technical lectures by prominent engineers and scientists. Additional elements of this program include tours of LARC wind tunnels, computational facilities, and laboratories. Library and computer facilities will be available for use by the participants.
Two Micron Laser Technology Advancements at NASA Langley Research Center
Singh, Upendra N.
2010-01-01
An Independent Laser Review Panel set up to examine NASA s space-based lidar missions and the technology readiness of lasers appropriate for space-based lidars indicated a critical need for an integrated research and development strategy to move laser transmitter technology from low technical readiness levels to the higher levels required for space missions. Based on the review, a multiyear Laser Risk Reduction Program (LRRP) was initiated by NASA in 2002 to develop technologies that ensure the successful development of the broad range of lidar missions envisioned by NASA. This presentation will provide an overview of the development of pulsed 2-micron solid-state laser technologies at NASA Langley Research Center for enabling space-based measurement of wind and carbon dioxide.
Formalizing the concept of sound.
Energy Technology Data Exchange (ETDEWEB)
Kaper, H. G.; Tipei, S.
1999-08-03
The notion of formalized music implies that a musical composition can be described in mathematical terms. In this article we explore some formal aspects of music and propose a framework for an abstract approach.
Towards a Formal Model of Social Data
DEFF Research Database (Denmark)
Mukkamala, Raghava Rao; Vatrapu, Ravi; Hussain, Abid
, transform, analyse, and report social data from social media platforms such as Facebook and twitter. Formal methods, models and tools for social data are largely limited to graph theoretical approaches informing conceptual developments in relational sociology and methodological developments in social...... network analysis. As far as we know, there are no integrated modeling approaches to social data across the conceptual, formal and software realms. Social media analytics can be undertaken in two main ways - ”Social Graph Analytics” and ”Social Text Analytics” (Vatrapu, in press/2013). Social graph......, we exemplify the semantics of the formal model with real-world social data examples. Third, we briefly present and discuss the Social Data Analytics Tool (SODATO) that realizes the conceptual model in software and provisions social data for computational social science analysis based on the formal...
Formalisms for reuse and systems integration
Rubin, Stuart
2015-01-01
Reuse and integration are defined as synergistic concepts, where reuse addresses how to minimize redundancy in the creation of components; while, integration focuses on component composition. Integration supports reuse and vice versa. These related concepts support the design of software and systems for maximizing performance while minimizing cost. Knowledge, like data, is subject to reuse; and, each can be interpreted as the other. This means that inherent complexity, a measure of the potential utility of a system, is directly proportional to the extent to which it maximizes reuse and integration. Formal methods can provide an appropriate context for the rigorous handling of these synergistic concepts. Furthermore, formal languages allow for non ambiguous model specification; and, formal verification techniques provide support for insuring the validity of reuse and integration mechanisms. This edited book includes 12 high quality research papers written by experts in formal aspects of reuse and integratio...
Formalization of Database Systems -- and a Formal Definition of {IMS}
DEFF Research Database (Denmark)
Bjørner, Dines; Løvengreen, Hans Henrik
1982-01-01
Drawing upon an analogy between Programming Language Systems and Database Systems we outline the requirements that architectural specifications of database systems must futfitl, and argue that only formal, mathematical definitions may 6atisfy these. Then we illustrate home aspects and touch upon...... come ueee of formal definitions of data models and databaee management systems. A formal model of INS will carry this discussion. Finally we survey some of the exkting literature on formal definitions of database systems. The emphasis will be on constructive definitions in the denotationul semantics...... style of the VCM: Vienna Development Nethd. The role of formal definitions in international standardiaation efforts is briefly mentioned....
Topical Roots of Formal Dialectic
Krabbe, Erik C. W.
Formal dialectic has its roots in ancient dialectic. We can trace this influence in Charles Hamblin's book on fallacies, in which he introduced his first formal dialectical systems. Earlier, Paul Lorenzen proposed systems of dialogical logic, which were in fact formal dialectical systems avant la
Directory of Open Access Journals (Sweden)
Diana-Maria Drigă
2015-12-01
Full Text Available The concept of resilience has represented during the recent years a leading concern both in Romania, within the European Union and worldwide. Specialists in economics, management, finance, legal sciences, political sciences, sociology, psychology, grant a particular interest to this concept. Multidisciplinary research of resilience has materialized throughout the time in multiple conceptualizations and theorizing, but without being a consensus between specialists in terms of content, specificity and scope. Through this paper it is intended to clarify the concept of resilience, achieving an exploration of the evolution of this concept in ecological, social and economic environment. At the same time, the paper presents aspects of feedback mechanisms and proposes a formalization of resilience using the logic and mathematical analysis.
DEFF Research Database (Denmark)
Levinsen, Karin; Sørensen, Birgitte Holm
2011-01-01
and other relevant stakeholders, as well as participant observations in the classroom documented by thick descriptions, formal and informal interviews and focus group interviews. The aim of the study was to explore and identify relations between designs for teaching and learning and the students' learning......This paper presents findings from a large-scale longitudinal, qualitative study - Project ICT and Learning (PIL) - that engaged the participation of eight primary schools in Denmark, and was conducted between 2006 and 2008. The research design was based on action research, involving teachers...... of school subjects within defined learning goals and curricula, along with various implementations of ICT in the pedagogical everyday practice (Levinsen & Sørensen 2008). However, another research strand - the topic of this paper - emerged during the project's life cycle as a consequence of ongoing changes...
Formal Proofs for Nonlinear Optimization
Directory of Open Access Journals (Sweden)
Victor Magron
2015-01-01
Full Text Available We present a formally verified global optimization framework. Given a semialgebraic or transcendental function f and a compact semialgebraic domain K, we use the nonlinear maxplus template approximation algorithm to provide a certified lower bound of f over K.This method allows to bound in a modular way some of the constituents of f by suprema of quadratic forms with a well chosen curvature. Thus, we reduce the initial goal to a hierarchy of semialgebraic optimization problems, solved by sums of squares relaxations. Our implementation tool interleaves semialgebraic approximations with sums of squares witnesses to form certificates. It is interfaced with Coq and thus benefits from the trusted arithmetic available inside the proof assistant. This feature is used to produce, from the certificates, both valid underestimators and lower bounds for each approximated constituent.The application range for such a tool is widespread; for instance Hales' proof of Kepler's conjecture yields thousands of multivariate transcendental inequalities. We illustrate the performance of our formal framework on some of these inequalities as well as on examples from the global optimization literature.
Luna, Augustin; Karac, Evrim I; Sunshine, Margot; Chang, Lucas; Nussinov, Ruth; Aladjem, Mirit I; Kohn, Kurt W
2011-05-17
The Molecular Interaction Map (MIM) notation offers a standard set of symbols and rules on their usage for the depiction of cellular signaling network diagrams. Such diagrams are essential for disseminating biological information in a concise manner. A lack of software tools for the notation restricts wider usage of the notation. Development of software is facilitated by a more detailed specification regarding software requirements than has previously existed for the MIM notation. A formal implementation of the MIM notation was developed based on a core set of previously defined glyphs. This implementation provides a detailed specification of the properties of the elements of the MIM notation. Building upon this specification, a machine-readable format is provided as a standardized mechanism for the storage and exchange of MIM diagrams. This new format is accompanied by a Java-based application programming interface to help software developers to integrate MIM support into software projects. A validation mechanism is also provided to determine whether MIM datasets are in accordance with syntax rules provided by the new specification. The work presented here provides key foundational components to promote software development for the MIM notation. These components will speed up the development of interoperable tools supporting the MIM notation and will aid in the translation of data stored in MIM diagrams to other standardized formats. Several projects utilizing this implementation of the notation are outlined herein. The MIM specification is available as an additional file to this publication. Source code, libraries, documentation, and examples are available at http://discover.nci.nih.gov/mim.
A formalization of the flutter shutter
Tendero, Yohann; Rougé, Bernard; Morel, Jean-Michel
2012-09-01
Acquiring good quality images of moving objects by a digital camera remains a valid question. If the velocity of the photographed object is not known, it is virtually impossible to tune an optimal exposure time. For this reason the recent Agrawal et al. flutter shutter apparatus has generated much interest. In this communication, we propose a mathematical formalization of a general flutter shutter method, also permitting non-binary shutter sequences. Thanks to this formalization, the question of the optimal flutter shutter code can be defined and solved. The method gives analytic formulas for the best attainable SNR for the restored image. It also gives a way to compute optimal flutter shutter codes.
Spinor formalism and complex-vector formalism of general relativity
International Nuclear Information System (INIS)
Han-ying, G.; Yong-shi, W.; Gendao, L.
1974-01-01
In this paper, using E. Cartan's exterior calculus, we give the spinor form of the structure equations, which leads naturally to the Newman--Penrose equations. Furthermore, starting from the spinor spaces and the el (2C) algebra, we construct the general complex-vector formalism of general relativity. We find that both the Cahen--Debever--Defrise complex-vector formalism and that of Brans are its special cases. Thus, the spinor formalism and the complex-vector formalism of general relativity are unified on the basis of the uni-modular group SL(2C) and its Lie algebra
Rapidly converging path integral formalism. Pt. 1
International Nuclear Information System (INIS)
Bender, I.; Gromes, D.; Marquard, U.
1990-01-01
The action to be used in the path integral formalism is expanded in a systematic way in powers of the time spacing ε in order to optimize the convergence to the continuum limit. This modifies and extends the usual formalism in a transparent way. The path integral approximation to the Green function obtained by this method approaches the continuum Green function with a higher power of ε than the usual one. The general theoretical derivations are exemplified analytically for the harmonic oscillator and by Monte Carlo methods for the anharmonic oscillator. We also show how curvilinear coordinates and curved spaces can naturally be treated within this formalism. Work on field theory is in progress. (orig.)
Overview of NASA Langley's Piezoelectric Ceramic Packaging Technology and Applications
Bryant, Robert G.
2007-01-01
Over the past decade, NASA Langley Research Center (LaRC) has developed several actuator packaging concepts designed to enhance the performance of commercial electroactive ceramics. NASA LaRC focused on properly designed actuator and sensor packaging for the following reasons, increased durability, protect the working material from the environment, allow for proper mechanical and electrical contact, afford "ready to use" mechanisms that are scalable, and develop fabrication methodology applicable to any active material of the same physical class. It is more cost effective to enhance or tailor the performance of existing systems, through innovative packaging, than to develop, test and manufacture new materials. This approach led to the development of several solid state actuators that include THUNDER, the Macrofiber Composite or (MFC) and the Radial Field Diaphragm or (RFD). All these actuators are fabricated using standard materials and processes derived from earlier concepts. NASA s fabrication and packaging technology as yielded, piezoelectric actuators and sensors that are easy to implement, reliable, consistent in properties, and of lower cost to manufacture in quantity, than their predecessors (as evidenced by their continued commercial availability.) These piezoelectric actuators have helped foster new research and development in areas involving computational modeling, actuator specific refinements, and engineering system redesign which led to new applications for piezo-based devices that replace traditional systems currently in use.
Langley Research Center Utility Risk from Future Climate Change
De Young, Russell J.; Ganoe, Rene
2015-01-01
The successful operation of NASA Langley Research Center (LaRC) depends on services provided by several public utility companies. These include Newport News Waterworks, Dominion Virginia Power, Virginia Natural Gas and Hampton Roads Sanitation District. LaRC's plan to respond to future climate change should take into account how these companies plan to avoid interruption of services while minimizing cost to the customers. This report summarizes our findings from publicly available documents on how each company plans to respond. This will form the basis for future planning for the Center. Our preliminary findings show that flooding and severe storms could interrupt service from the Waterworks and Sanitation District but the potential is low due to plans in place to address climate change on their system. Virginia Natural Gas supplies energy to produce steam but most current steam comes from the Hampton trash burning plant, thus interruption risk is low. Dominion Virginia Power does not address climate change impacts on their system in their public reports. The potential interruption risk is considered to be medium. The Hampton Roads Sanitation District is projecting a major upgrade of their system to mitigate clean water inflow and infiltration. This will reduce infiltration and avoid overloading the pump stations and treatment plants.
Collaborative Mission Design at NASA Langley Research Center
Gough, Kerry M.; Allen, B. Danette; Amundsen, Ruth M.
2005-01-01
NASA Langley Research Center (LaRC) has developed and tested two facilities dedicated to increasing efficiency in key mission design processes, including payload design, mission planning, and implementation plan development, among others. The Integrated Design Center (IDC) is a state-of-the-art concurrent design facility which allows scientists and spaceflight engineers to produce project designs and mission plans in a real-time collaborative environment, using industry-standard physics-based development tools and the latest communication technology. The Mission Simulation Lab (MiSL), a virtual reality (VR) facility focused on payload and project design, permits engineers to quickly translate their design and modeling output into enhanced three-dimensional models and then examine them in a realistic full-scale virtual environment. The authors were responsible for envisioning both facilities and turning those visions into fully operational mission design resources at LaRC with multiple advanced capabilities and applications. In addition, the authors have created a synergistic interface between these two facilities. This combined functionality is the Interactive Design and Simulation Center (IDSC), a meta-facility which offers project teams a powerful array of highly advanced tools, permitting them to rapidly produce project designs while maintaining the integrity of the input from every discipline expert on the project. The concept-to-flight mission support provided by IDSC has shown improved inter- and intra-team communication and a reduction in the resources required for proposal development, requirements definition, and design effort.
Formal verification of Simulink/Stateflow diagrams a deductive approach
Zhan, Naijun; Zhao, Hengjun
2017-01-01
This book presents a state-of-the-art technique for formal verification of continuous-time Simulink/Stateflow diagrams, featuring an expressive hybrid system modelling language, a powerful specification logic and deduction-based verification approach, and some impressive, realistic case studies. Readers will learn the HCSP/HHL-based deductive method and the use of corresponding tools for formal verification of Simulink/Stateflow diagrams. They will also gain some basic ideas about fundamental elements of formal methods such as formal syntax and semantics, and especially the common techniques applied in formal modelling and verification of hybrid systems. By investigating the successful case studies, readers will realize how to apply the pure theory and techniques to real applications, and hopefully will be inspired to start to use the proposed approach, or even develop their own formal methods in their future work.
Formal System Verification - Extension 2
2012-08-08
vision of truly trustworthy systems has been to provide a formally verified microkernel basis. We have previously developed the seL4 microkernel...together with a formal proof (in the theorem prover Isabelle/HOL) of its functional correctness [6]. This means that all the behaviours of the seL4 C...source code are included in the high-level, formal specification of the kernel. This work enabled us to provide further formal guarantees about seL4 , in
Formalized Epistemology, Logic, and Grammar
Bitbol, Michel
The task of a formal epistemology is defined. It appears that a formal epistemology must be a generalization of "logic" in the sense of Wittgenstein's Tractatus. The generalization is required because, whereas logic presupposes a strict relation between activity and language, this relation may be broken in some domains of experimental enquiry (e.g., in microscopic physics). However, a formal epistemology should also retain a major feature of Wittgenstein's "logic": It must not be a discourse about scientific knowledge, but rather a way of making manifest the structures usually implicit in knowledge-gaining activity. This strategy is applied to the formalism of quantum mechanics.
Concepciones acerca de la maternidad en la educación formal y no formal
Directory of Open Access Journals (Sweden)
Alvarado Calderón, Kathia
2005-06-01
Full Text Available Este artículo presenta algunos resultados de la investigación desarrollada en el Instituto de Investigación en Educación (INIE, bajo el nombre "Construcción del concepto de maternidad en la educación formal y no formal". Utilizando un enfoque cualitativo de investigación, recurrimos a las técnicas de elaboración de dibujos, entrevistas y grupo focal como recursos para la recolección de la información. De esta manera, podemos acercarnos a las concepciones de la maternidad que utilizan los participantes de las diferentes instancias educativas (formal y no formal con quienes se trabajó. This article presents some results the research developed in the Instituto de Investigación en Educación (INIE, named "Construcción del concepto de maternidad en la educación formal y no formal". It begins with a theoretical analysis about social conceptions regarding motherhood in the occidental societies. Among the techniques for gathering information were thematic drawing, interview and focus group, using a qualitative approach research method. This is followed by a brief summary of main findings. The article concludes with a proposal of future working lines for the deconstruction of the motherhood concept in formal and informal education contexts.
Formal, Non-Formal and Informal Learning in the Sciences
Ainsworth, Heather L.; Eaton, Sarah Elaine
2010-01-01
This research report investigates the links between formal, non-formal and informal learning and the differences between them. In particular, the report aims to link these notions of learning to the field of sciences and engineering in Canada and the United States, including professional development of adults working in these fields. It offers…
Formal, Model-oriented Software Development Methods - From VDM to ProCoS & from RAISE to LaCoS
DEFF Research Database (Denmark)
Bjørner, Dines; Haxthausen, Anne Elisabeth; Havelund, K.
1991-01-01
the technical/scientific essence of the VDM and RAISE methods, and explain the ProCos and LaCoS project structures. The paper will first outline five central roles of software developers: problem domain specialists, programmers, software engineers, resident computation scientists and managers. We will briefly...
Keldysh formalism for multiple parallel worlds
International Nuclear Information System (INIS)
Ansari, M.; Nazarov, Y. V.
2016-01-01
We present a compact and self-contained review of the recently developed Keldysh formalism for multiple parallel worlds. The formalism has been applied to consistent quantum evaluation of the flows of informational quantities, in particular, to the evaluation of Renyi and Shannon entropy flows. We start with the formulation of the standard and extended Keldysh techniques in a single world in a form convenient for our presentation. We explain the use of Keldysh contours encompassing multiple parallel worlds. In the end, we briefly summarize the concrete results obtained with the method.
Keldysh formalism for multiple parallel worlds
Ansari, M.; Nazarov, Y. V.
2016-03-01
We present a compact and self-contained review of the recently developed Keldysh formalism for multiple parallel worlds. The formalism has been applied to consistent quantum evaluation of the flows of informational quantities, in particular, to the evaluation of Renyi and Shannon entropy flows. We start with the formulation of the standard and extended Keldysh techniques in a single world in a form convenient for our presentation. We explain the use of Keldysh contours encompassing multiple parallel worlds. In the end, we briefly summarize the concrete results obtained with the method.
Formal Concept Analysis for Information Retrieval
Qadi, Abderrahim El; Aboutajedine, Driss; Ennouary, Yassine
2010-01-01
In this paper we describe a mechanism to improve Information Retrieval (IR) on the web. The method is based on Formal Concepts Analysis (FCA) that it is makes semantical relations during the queries, and allows a reorganizing, in the shape of a lattice of concepts, the answers provided by a search engine. We proposed for the IR an incremental algorithm based on Galois lattice. This algorithm allows a formal clustering of the data sources, and the results which it turns over are classified by ...
Keldysh formalism for multiple parallel worlds
Energy Technology Data Exchange (ETDEWEB)
Ansari, M.; Nazarov, Y. V., E-mail: y.v.nazarov@tudelft.nl [Delft University of Technology, Kavli Institute of Nanoscience (Netherlands)
2016-03-15
We present a compact and self-contained review of the recently developed Keldysh formalism for multiple parallel worlds. The formalism has been applied to consistent quantum evaluation of the flows of informational quantities, in particular, to the evaluation of Renyi and Shannon entropy flows. We start with the formulation of the standard and extended Keldysh techniques in a single world in a form convenient for our presentation. We explain the use of Keldysh contours encompassing multiple parallel worlds. In the end, we briefly summarize the concrete results obtained with the method.
Ontology Assisted Formal Specification Extraction from Text
Directory of Open Access Journals (Sweden)
Andreea Mihis
2010-12-01
Full Text Available In the field of knowledge processing, the ontologies are the most important mean. They make possible for the computer to understand better the natural language and to make judgments. In this paper, a method which use ontologies in the semi-automatic extraction of formal specifications from a natural language text is proposed.
Formal Modeling and Analysis of Timed Systems
DEFF Research Database (Denmark)
Larsen, Kim Guldstrand; Niebert, Peter
This book constitutes the thoroughly refereed post-proceedings of the First International Workshop on Formal Modeling and Analysis of Timed Systems, FORMATS 2003, held in Marseille, France in September 2003. The 19 revised full papers presented together with an invited paper and the abstracts of ...... systems, discrete time systems, timed languages, and real-time operating systems....... of two invited talks were carefully selected from 36 submissions during two rounds of reviewing and improvement. All current aspects of formal method for modeling and analyzing timed systems are addressed; among the timed systems dealt with are timed automata, timed Petri nets, max-plus algebras, real-time......This book constitutes the thoroughly refereed post-proceedings of the First International Workshop on Formal Modeling and Analysis of Timed Systems, FORMATS 2003, held in Marseille, France in September 2003. The 19 revised full papers presented together with an invited paper and the abstracts...
Leibniz' First Formalization of Syllogistics
DEFF Research Database (Denmark)
Robering, Klaus
2014-01-01
of letters just those which belong to the useful, i.e., valid, modes. The set of codes of valid modes turns out to be a so-called "regular" language (in the sense of formal-language-theory). Leibniz' formalization of syllogistics in his Dissertatio thus contains an estimation of the computational complexity...
Seniority in projection operator formalism
International Nuclear Information System (INIS)
Ullah, N.
1976-01-01
It is shown that the concept of seniority can be introduced in projection operator formalism through the use of the operator Q, which has been defined by de-Shalit and Talmi. The usefulness of seniority concept in projection operator formalism is discussed. An example of four nucleons in j=3/2 configuration is given for illustrative purposes
Miranda, R P; Fisher, A J; Stella, L; Horsfield, A P
2011-06-28
The solution of the time-dependent Schrödinger equation for systems of interacting electrons is generally a prohibitive task, for which approximate methods are necessary. Popular approaches, such as the time-dependent Hartree-Fock (TDHF) approximation and time-dependent density functional theory (TDDFT), are essentially single-configurational schemes. TDHF is by construction incapable of fully accounting for the excited character of the electronic states involved in many physical processes of interest; TDDFT, although exact in principle, is limited by the currently available exchange-correlation functionals. On the other hand, multiconfigurational methods, such as the multiconfigurational time-dependent Hartree-Fock (MCTDHF) approach, provide an accurate description of the excited states and can be systematically improved. However, the computational cost becomes prohibitive as the number of degrees of freedom increases, and thus, at present, the MCTDHF method is only practical for few-electron systems. In this work, we propose an alternative approach which effectively establishes a compromise between efficiency and accuracy, by retaining the smallest possible number of configurations that catches the essential features of the electronic wavefunction. Based on a time-dependent variational principle, we derive the MCTDHF working equation for a multiconfigurational expansion with fixed coefficients and specialise to the case of general open-shell states, which are relevant for many physical processes of interest.
High performance real-time flight simulation at NASA Langley
Cleveland, Jeff I., II
1994-01-01
In order to meet the stringent time-critical requirements for real-time man-in-the-loop flight simulation, computer processing operations must be deterministic and be completed in as short a time as possible. This includes simulation mathematical model computational and data input/output to the simulators. In 1986, in response to increased demands for flight simulation performance, personnel at NASA's Langley Research Center (LaRC), working with the contractor, developed extensions to a standard input/output system to provide for high bandwidth, low latency data acquisition and distribution. The Computer Automated Measurement and Control technology (IEEE standard 595) was extended to meet the performance requirements for real-time simulation. This technology extension increased the effective bandwidth by a factor of ten and increased the performance of modules necessary for simulator communications. This technology is being used by more than 80 leading technological developers in the United States, Canada, and Europe. Included among the commercial applications of this technology are nuclear process control, power grid analysis, process monitoring, real-time simulation, and radar data acquisition. Personnel at LaRC have completed the development of the use of supercomputers for simulation mathematical model computational to support real-time flight simulation. This includes the development of a real-time operating system and the development of specialized software and hardware for the CAMAC simulator network. This work, coupled with the use of an open systems software architecture, has advanced the state of the art in real time flight simulation. The data acquisition technology innovation and experience with recent developments in this technology are described.
New procedure for departure formalities
HR & GS Departments
2011-01-01
As part of the process of simplifying procedures and rationalising administrative processes, the HR and GS Departments have introduced new personalised departure formalities on EDH. These new formalities have applied to students leaving CERN since last year and from 17 October 2011 this procedure will be extended to the following categories of CERN personnel: Staff members, Fellows and Associates. It is planned to extend this electronic procedure to the users in due course. What purpose do departure formalities serve? The departure formalities are designed to ensure that members of the personnel contact all the relevant services in order to return any necessary items (equipment, cards, keys, dosimeter, electronic equipment, books, etc.) and are aware of all the benefits to which they are entitled on termination of their contract. The new departure formalities on EDH have the advantage of tailoring the list of services that each member of the personnel must visit to suit his individual contractual and p...
Schlenker, Philippe; Chemla, Emmanuel; Schel, Anne M.; Fuller, James; Gautier, Jean Pierre; Kuhn, Jeremy; Veselinović, Dunja; Arnold, Kate; Cäsar, Cristiane; Keenan, Sumir; Lemasson, Alban; Ouattara, Karim; Ryder, Robin; Zuberbühler, Klaus
2016-01-01
We argue that rich data gathered in experimental primatology in the last 40 years can benefit from analytical methods used in contemporary linguistics. Focusing on the syntactic and especially semantic side, we suggest that these methods could help clarify five questions: (i) what morphology and
Formal specifications for safety grade systems
International Nuclear Information System (INIS)
Chisholm, G.H.; Smith, B.T.; Wojcik, A.S.
1992-01-01
The authors describe the findings of a study into the application of formal methods to the specification of a safety system for an operating nuclear reactor. They developed a formal specification that is used to verify and validate that no unsafe condition will result from action or inaction of the system. For this reason, the specification must facilitate thinking about, talking about, and implementing the system. In fact, the specification must provide a bridge between people (designers, engineers, policy makers) and diverse implementations (hardware, software, sensors, power supplies) at all levels. For a specification to serve as an effective linkage, it must have the following properties: (1) completeness, (2) conciseness, (3) unambiguity, and (4) communicativeness. In this paper they describe the development of a specification that has three properties. This development is based on the use of formal methods, i.e., methods that add mathematical rigor to the development, analysis and operation of computer systems and to applications based thereon (Neumann). They demonstrate that a specification derived from a formal basis facilitates development of the design and its subsequent verification
Formal verification - Robust and efficient code: Introduction to Formal Verification
CERN. Geneva
2016-01-01
In general, FV means "proving that certain properties hold for a given system using formal mathematics". This definition can certainly feel daunting, however, as we will learn, we can reap benefits from the paradigm without digging too deep into ...
Schlenker, Philippe; Chemla, Emmanuel; Schel, Anne M.; Fuller, James; Gautier, Jean-Pierre; Kuhn, Jeremy; Veselinović, Dunja; Arnold, Kate; Cäsar, Cristiane; Keenan, Sumir; Lemasson, Alban; Ouattara, Karim; Ryder, Robin; Zuberbühler, Klaus
2016-01-01
Zuberbühler: The research leading to these results received funding from the European Research Council under ERC grant ‘Prilang 283871’ and also from the Swiss National Science Foundation under grant ‘FN 310030_143359/1’. We argue that rich data gathered in experimental primatology in the last 40 years can benefit from analytical methods used in contemporary linguistics. Focusing on the syntactic and especially semantic side, we suggest that these methods could help clarify five questions:...
El Salvador - Formal Technical Education
Millennium Challenge Corporation — With a budget of nearly $20 million, the Formal Technical Education Sub-Activity was designed to strengthen technical and vocational educational institutions in the...
Concepts of formal concept analysis
Žáček, Martin; Homola, Dan; Miarka, Rostislav
2017-07-01
The aim of this article is apply of Formal Concept Analysis on concept of world. Formal concept analysis (FCA) as a methodology of data analysis, information management and knowledge representation has potential to be applied to a verity of linguistic problems. FCA is mathematical theory for concepts and concept hierarchies that reflects an understanding of concept. Formal concept analysis explicitly formalizes extension and intension of a concept, their mutual relationships. A distinguishing feature of FCA is an inherent integration of three components of conceptual processing of data and knowledge, namely, the discovery and reasoning with concepts in data, discovery and reasoning with dependencies in data, and visualization of data, concepts, and dependencies with folding/unfolding capabilities.
An overview of selected NASP aeroelastic studies at the NASA Langley Research Center
Spain, Charles V.; Soistmann, David L.; Parker, Ellen C.; Gibbons, Michael D.; Gilbert, Michael G.
1990-01-01
Following an initial discussion of the NASP flight environment, the results of recent aeroelastic testing of NASP-type highly swept delta-wing models in Langley's Transonic Dynamics Tunnel (TDT) are summarized. Subsonic and transonic flutter characteristics of a variety of these models are described, and several analytical codes used to predict flutter of these models are evaluated. These codes generally provide good, but conservative predictions of subsonic and transonic flutter. Also, test results are presented on a nonlinear transonic phenomena known as aileron buzz which occurred in the wind tunnel on highly swept delta wings with full-span ailerons. An analytical procedure which assesses the effects of hypersonic heating on aeroelastic instabilities (aerothermoelasticity) is also described. This procedure accurately predicted flutter of a heated aluminum wing on which experimental data exists. Results are presented on the application of this method to calculate the flutter characteristics of a fine-element model of a generic NASP configuration. Finally, it is demonstrated analytically that active controls can be employed to improve the aeroelastic stability and ride quality of a generic NASP vehicle flying at hypersonic speeds.
Helicity formalism and spin effects
International Nuclear Information System (INIS)
Anselmino, M.; Caruso, F.; Piovano, U.
1990-01-01
The helicity formalism and the technique to compute amplitudes for interaction processes involving leptons, quarks, photons and gluons are reviewed. Explicit calculations and examples of exploitation of symmetry properties are shown. The formalism is then applied to the discussion of several hadronic processes and spin effects: the experimental data, when related to the properties of the elementary constituent interactions, show many not understood features. Also the nucleon spin problem is briefly reviewed. (author)
Formal Test Automation: The Conference Protocol with PHACT
Heerink, A.W.; Ural, Hasan; Probert, Robert L.; Feenstra, J.; Tretmans, G.J.; von Bochmann, Gregor
2000-01-01
We discuss a case study of automatic test generation and test execution based on formal methods. The case is the Conference Protocol, a simple, chatbox-like protocol, for which (formal) specifications and multiple implementations are publicly available and which is also used in other case study
Taming Living Logic using Formal Methods
DEFF Research Database (Denmark)
Baig, Hasan; Madsen, Jan
2017-01-01
One of the goals of synthetic biology is to build genetic circuits to control the behavior of a cell for different application domains, such as medical, environmental, and biotech. During the design process of genetic circuits, biologists are often interested in the probability of a system to work...
Epistemology, software engineering and formal methods
Holloway, C. Michael
1994-01-01
One of the most basic questions anyone can ask is, 'How do I know that what I think I know is true?' The study of this question is called epistemology. Traditionally, epistemology has been considered to be of legitimate interest only to philosophers, theologians, and three year old children who respond to every statement by asking, 'Why?' Software engineers need to be interested in the subject, however, because a lack of sufficient understanding of epistemology contributes to many of the current problems in the field.
Formal method for analysis of multipattern recognition
International Nuclear Information System (INIS)
Yatsunenko, Yu.A.
1988-01-01
In the search for the global maximum position the integral approach is suggested. Hermit polinom coefficients, which present the row of disintegration of function symmetrized around the point sought for the global maximum are analyzed. Analogy for multidimensional function is considered. The iteration procedure of allocation of the global maxima region and the rule of search termination is proposed for discussion
Formal truncations of connected kernel equations
International Nuclear Information System (INIS)
Dixon, R.M.
1977-01-01
The Connected Kernel Equations (CKE) of Alt, Grassberger and Sandhas (AGS); Kouri, Levin and Tobocman (KLT); and Bencze, Redish and Sloan (BRS) are compared against reaction theory criteria after formal channel space and/or operator truncations have been introduced. The Channel Coupling Class concept is used to study the structure of these CKE's. The related wave function formalism of Sandhas, of L'Huillier, Redish and Tandy and of Kouri, Krueger and Levin are also presented. New N-body connected kernel equations which are generalizations of the Lovelace three-body equations are derived. A method for systematically constructing fewer body models from the N-body BRS and generalized Lovelace (GL) equations is developed. The formally truncated AGS, BRS, KLT and GL equations are analyzed by employing the criteria of reciprocity and two-cluster unitarity. Reciprocity considerations suggest that formal truncations of BRS, KLT and GL equations can lead to reciprocity-violating results. This study suggests that atomic problems should employ three-cluster connected truncations and that the two-cluster connected truncations should be a useful starting point for nuclear systems
Scientific and technical photography at NASA Langley Research Center
Davidhazy, Andrew
1994-12-01
As part of my assignment connected with the Scientific and Technical Photography & Lab (STPL) at the NASA Langley Research Center I conducted a series of interviews and observed the day to day operations of the STPL with the ultimate objective of becoming exposed first hand to a scientific and technical photo/imaging department for which my school prepares its graduates. I was also asked to share my observations with the staff in order that these comments and observations might assist the STPL to better serve its customers. Meetings with several individuals responsible for various wind tunnels and with a group that provides photo-optical instrumentation services at the Center gave me an overview of the services provided by the Lab and possible areas for development. In summary form these are some of the observations that resulted from the interviews and daily contact with the STPL facility. (1) The STPL is perceived as a valuable and almost indispensable service group within the organization. This comment was invariably made by everyone. Everyone also seemed to support the idea that the STPL continue to provide its current level of service and quality. (2) The STPL generally is not perceived to be a highly technically oriented group but rather as a provider of high quality photographic illustration and documentation services. In spite of the importance and high marks assigned to the STPL there are several observations that merit consideration and evaluation for possible inclusion into the STPL's scope of expertise and future operating practices. (1) While the care and concern for artistic rendition of subjects is seen as laudable and sometimes valuable, the time that this often requires is seen as interfering with keeping the tunnels operating at maximum productivity. Tunnel managers would like to shorten down-time due to photography, have services available during evening hours and on short notice. It may be of interest to the STPL that tunnel managers are
Exploiting thesauri knowledge in medical guideline formalization
Serban, R.C.; ten Teije, A.C.M.
2009-01-01
Objectives: As in software product lifecycle, the effort spent in maintaining medical knowl edge in guidelines can be reduced, if modularization, formalization and tracking of domain knowledge are employed across the guideline development phases. Methods: We propose to exploit and combine knowledge templates with medical background knowledge from existing thesauri in order to produce reusable building blocks used in guideline development. These tem- plates enable easier guideline formalizatio...
DEFF Research Database (Denmark)
Villesèche, Florence; Josserand, Emmanuel
2017-01-01
/organisations and the wider social group of women in business. Research limitations/implications: The authors focus on the distinction between external and internal formal women-only networks while also acknowledging the broader diversity that can characterise such networks. Their review provides the reader with an insight...... member level, the authors suggest that such networks can be of value for organisations and the wider social group of women in management and leadership positions.......Purpose: The purpose of this paper is to review the emerging literature on formal women-only business networks and outline propositions to develop this under-theorised area of knowledge and stimulate future research. Design/methodology/approach: The authors review the existing literature on formal...
The role of formal specifications
International Nuclear Information System (INIS)
McHugh, J.
1994-01-01
The role of formal requirements specification is discussed under the premise that the primary purpose of such specifications is to facilitate clear and unambiguous communications among the communities of interest for a given project. An example is presented in which the failure to reach such an understanding resulted in an accident at a chemical plant. Following the example, specification languages based on logical formalisms and notations are considered. These are rejected as failing to serve the communications needs of diverse communities. The notion of a specification as a surrogate for a program is also considered and rejected. The paper ends with a discussion of the type of formal notation that will serve the communications role and several encouraging developments are noted
Formal connections in deformation quantization
DEFF Research Database (Denmark)
Masulli, Paolo
The field of this thesis is deformation quantization, and we consider mainly symplectic manifolds equipped with a star product. After reviewing basics in complex geometry, we introduce quantization, focusing on geometric quantization and deformation quantization. The latter is defined as a star...... characteristic class, and that formal connections form an affine space over the derivations of the star products. Moreover, if the parameter space for the family of star products is contractible, we obtain that any two flat formal connections are gauge equivalent via a self-equivalence of the family of star...
Formal refinement of extended state machines
Directory of Open Access Journals (Sweden)
Thomas Fayolle
2016-06-01
Full Text Available In a traditional formal development process, e.g. using the B method, the informal user requirements are (manually translated into a global abstract formal specification. This translation is especially difficult to achieve. The Event-B method was developed to incrementally and formally construct such a specification using stepwise refinement. Each increment takes into account new properties and system aspects. In this paper, we propose to couple a graphical notation called Algebraic State-Transition Diagrams (ASTD with an Event-B specification in order to provide a better understanding of the software behaviour. The dynamic behaviour is captured by the ASTD, which is based on automata and process algebra operators, while the data model is described by means of an Event-B specification. We propose a methodology to incrementally refine such specification couplings, taking into account new refinement relations and consistency conditions between the control specification and the data specification. We compare the specifications obtained using each approach for readability and proof complexity. The advantages and drawbacks of the traditional approach and of our methodology are discussed. The whole process is illustrated by a railway CBTC-like case study. Our approach is supported by tools for translating ASTD's into B and Event-B into B.
Transforming PLC Programs into Formal Models for Verification Purposes
Darvas, D; Blanco, E
2013-01-01
Most of CERN’s industrial installations rely on PLC-based (Programmable Logic Controller) control systems developed using the UNICOS framework. This framework contains common, reusable program modules and their correctness is a high priority. Testing is already applied to find errors, but this method has limitations. In this work an approach is proposed to transform automatically PLC programs into formal models, with the goal of applying formal verification to ensure their correctness. We target model checking which is a precise, mathematical-based method to check formalized requirements automatically against the system.
Viscous warm inflation: Hamilton-Jacobi formalism
Akhtari, L.; Mohammadi, A.; Sayar, K.; Saaidi, Kh.
2017-04-01
Using Hamilton-Jacobi formalism, the scenario of warm inflation with viscous pressure is considered. The formalism gives a way of computing the slow-rolling parameter without extra approximation, and it is well-known as a powerful method in cold inflation. The model is studied in detail for three different cases of the dissipation and bulk viscous pressure coefficients. In the first case where both coefficients are taken as constant, it is shown that the case could not portray warm inflationary scenario compatible with observational data even it is possible to restrict the model parameters. For other cases, the results shows that the model could properly predicts the perturbation parameters in which they stay in perfect agreement with Planck data. As a further argument, r -ns and αs -ns are drown that show the acquired result could stand in acceptable area expressing a compatibility with observational data.
Comparing formal verification approaches of interlocking systems
DEFF Research Database (Denmark)
Haxthausen, Anne Elisabeth; Nguyen, Hoang Nga; Roggenbach, Markus
2016-01-01
these approaches. As a first step towards this, in this paper we suggest a way to compare different formal approaches for verifying designs of route-based interlocking systems and we demonstrate it on modelling and verification approaches developed within the research groups at DTU/Bremen and at Surrey......The verification of railway interlocking systems is a challenging task, and therefore several research groups have suggested to improve this task by using formal methods, but they use different modelling and verification approaches. To advance this research, there is a need to compare....../Swansea. The focus is on designs that are specified by so-called control tables. The paper can serve as a starting point for further comparative studies. The DTU/Bremen research has been funded by the RobustRailS project granted by Innovation Fund Denmark. The Surrey/Swansea research has been funded by the Safe...
Contextualising Formal Education for Improved Relevance: A case ...
African Journals Online (AJOL)
Allowing formal education to take place outside of the school. • Necessitating a change in pedagogy to more learner-centred discovery methods. • Allowing ..... Switzerland: International Union for the Conservation of Nature. Barrett, A.
Scientific and technical photography at NASA Langley Research Center
Davidhazy, Andrew
1994-01-01
As part of my assignment connected with the Scientific and Technical Photography & Lab (STPL) at the NASA Langley Research Center I conducted a series of interviews and observed the day to day operations of the STPL with the ultimate objective of becoming exposed first hand to a scientific and technical photo/imaging department for which my school prepares its graduates. I was also asked to share my observations with the staff in order that these comments and observations might assist the STPL to better serve its customers. Meetings with several individuals responsible for various wind tunnels and with a group that provides photo-optical instrumentation services at the Center gave me an overview of the services provided by the Lab and possible areas for development. In summary form these are some of the observations that resulted from the interviews and daily contact with the STPL facility. (1) The STPL is perceived as a valuable and almost indispensable service group within the organization. This comment was invariably made by everyone. Everyone also seemed to support the idea that the STPL continue to provide its current level of service and quality. (2) The STPL generally is not perceived to be a highly technically oriented group but rather as a provider of high quality photographic illustration and documentation services. In spite of the importance and high marks assigned to the STPL there are several observations that merit consideration and evaluation for possible inclusion into the STPL's scope of expertise and future operating practices. (1) While the care and concern for artistic rendition of subjects is seen as laudable and sometimes valuable, the time that this often requires is seen as interfering with keeping the tunnels operating at maximum productivity. Tunnel managers would like to shorten down-time due to photography, have services available during evening hours and on short notice. It may be of interest to the STPL that tunnel managers are
UAV Research at NASA Langley: Towards Safe, Reliable, and Autonomous Operations
Davila, Carlos G.
2016-01-01
Unmanned Aerial Vehicles (UAV) are fundamental components in several aspects of research at NASA Langley, such as flight dynamics, mission-driven airframe design, airspace integration demonstrations, atmospheric science projects, and more. In particular, NASA Langley Research Center (Langley) is using UAVs to develop and demonstrate innovative capabilities that meet the autonomy and robotics challenges that are anticipated in science, space exploration, and aeronautics. These capabilities will enable new NASA missions such as asteroid rendezvous and retrieval (ARRM), Mars exploration, in-situ resource utilization (ISRU), pollution measurements in historically inaccessible areas, and the integration of UAVs into our everyday lives all missions of increasing complexity, distance, pace, and/or accessibility. Building on decades of NASA experience and success in the design, fabrication, and integration of robust and reliable automated systems for space and aeronautics, Langley Autonomy Incubator seeks to bridge the gap between automation and autonomy by enabling safe autonomous operations via onboard sensing and perception systems in both data-rich and data-deprived environments. The Autonomy Incubator is focused on the challenge of mobility and manipulation in dynamic and unstructured environments by integrating technologies such as computer vision, visual odometry, real-time mapping, path planning, object detection and avoidance, object classification, adaptive control, sensor fusion, machine learning, and natural human-machine teaming. These technologies are implemented in an architectural framework developed in-house for easy integration and interoperability of cutting-edge hardware and software.
A Program of Research and Education in Astronautics at the NASA Langley Research Center
Tolson, Robert H.
2000-01-01
The objectives of the Program were to conduct research at the NASA Langley Research Center in the area of astronautics and to provide a comprehensive education program at the Center leading to advanced degrees in Astronautics. We believe that the program has successfully met the objectives and has been of significant benefit to NASA LaRC, the GWU and the nation.
NASA LANGLEY RESEARCH CENTER AND THE TIDEWATER INTERAGENCY POLLUTION PREVENTION PROGRAM
National Aeronautics and Space Administration (NASA)'s Langley Research Center (LaRC) is an 807-acre research center devoted to aeronautics and space research. aRC has initiated a broad-based pollution prevention program guided by a Pollution Prevention Program Plan and implement...
A Storm Surge and Inundation Model of the Back River Watershed at NASA Langley Research Center
Loftis, Jon Derek; Wang, Harry V.; DeYoung, Russell J.
2013-01-01
This report on a Virginia Institute for Marine Science project demonstrates that the sub-grid modeling technology (now as part of Chesapeake Bay Inundation Prediction System, CIPS) can incorporate high-resolution Lidar measurements provided by NASA Langley Research Center into the sub-grid model framework to resolve detailed topographic features for use as a hydrological transport model for run-off simulations within NASA Langley and Langley Air Force Base. The rainfall over land accumulates in the ditches/channels resolved via the model sub-grid was tested to simulate the run-off induced by heavy precipitation. Possessing both the capabilities for storm surge and run-off simulations, the CIPS model was then applied to simulate real storm events starting with Hurricane Isabel in 2003. It will be shown that the model can generate highly accurate on-land inundation maps as demonstrated by excellent comparison of the Langley tidal gauge time series data (CAPABLE.larc.nasa.gov) and spatial patterns of real storm wrack line measurements with the model results simulated during Hurricanes Isabel (2003), Irene (2011), and a 2009 Nor'easter. With confidence built upon the model's performance, sea level rise scenarios from the ICCP (International Climate Change Partnership) were also included in the model scenario runs to simulate future inundation cases.
Formal systems for persuasion dialogue
Prakken, Henry
This article reviews formal systems that regulate persuasion dialogues. In such dialogues two or more participants aim to resolve a difference of opinion, each trying to persuade the other participants to adopt their point of view. Systems for persuasion dialogue have found application in various
Charging transient in polyvinyl formal
Indian Academy of Sciences (India)
Unknown
401–406. © Indian Academy of Sciences. 401. Charging transient in polyvinyl formal. P K KHARE*, P L JAIN† and R K PANDEY‡. Department of Postgraduate Studies & Research in Physics & Electronics, Rani Durgavati University,. Jabalpur 482 001, India. †Department of Physics, Government PG College, Damoh 470 ...
A formalization of computational trust
Güven - Ozcelebi, C.; Holenderski, M.J.; Ozcelebi, T.; Lukkien, J.J.
2018-01-01
Computational trust aims to quantify trust and is studied by many disciplines including computer science, social sciences and business science. We propose a formal computational trust model, including its parameters and operations on these parameters, as well as a step by step guide to compute trust
Formal monkey linguistics : The debate
Schlenker, Philippe; Chemla, Emmanuel; Schel, Anne M.|info:eu-repo/dai/nl/413333450; Fuller, James; Gautier, Jean Pierre; Kuhn, Jeremy; Veselinović, Dunja; Arnold, Kate; Cäsar, Cristiane; Keenan, Sumir; Lemasson, Alban; Ouattara, Karim; Ryder, Robin; Zuberbühler, Klaus
2016-01-01
We explain why general techniques from formal linguistics can and should be applied to the analysis of monkey communication - in the areas of syntax and especially semantics. An informed look at our recent proposals shows that such techniques needn't rely excessively on categories of human language:
Rotor and wind turbine formalism
DEFF Research Database (Denmark)
Branlard, Emmanuel Simon Pierre
2017-01-01
The main conventions used in this book for the study of rotors are introduced in this chapter. The main assumptions and notations are provided. The formalism specific to wind turbines is presented. The forces, moments, velocities and dimensionless coefficients used in the study of rotors...
Critical formalism or digital biomorphology. The contemporary architecture formal dilema
Directory of Open Access Journals (Sweden)
Beatriz Villanueva Cajide
2018-05-01
Full Text Available With the dawn of digital media the architecture’s formal possibilities reached a level unknown before. The Guggenheim Museo branch in Bilbao appears in 1993 as the materialisation of the possibilities of the use of digital tools in architecture’s design, starting the development of a digital based architecture which currently has reached an exhaustion level that is evident in the repetition biomorphologic shapes emerged from the digital determinism to which some contemporary architectural practices have converged. While the digitalisation of the architectural process is irreversible and desirable, it is necessary to rethink the terms of this collaboration beyond the possibilities of the digital tools themselves. This article proposes to analyse seven texts written in the very moment when digitalisation became a real possibility, between Gehry’s conception of the Guggenheim Museum in 1992 and the Congress on Morphogenesis hold in the Architectural Association in 2004, in order to explore the possibility of reversing the process that has led to the formal exhaustion of digital architecture, from the acceptance of incorporating strategies coming from a contemporary critical formalism.
[How to write an article: formal aspects].
Corral de la Calle, M A; Encinas de la Iglesia, J
2013-06-01
Scientific research and the publication of the results of the studies go hand in hand. Exquisite research methods can only be adequately reflected in formal publication with the optimum structure. To ensure the success of this process, it is necessary to follow orderly steps, including selecting the journal in which to publish and following the instructions to authors strictly as well as the guidelines elaborated by diverse societies of editors and other institutions. It is also necessary to structure the contents of the article in a logical and attractive way and to use an accurate, clear, and concise style of language. Although not all the authors are directly involved in the actual writing, elaborating a scientific article is a collective undertaking that does not finish until the article is published. This article provides practical advice about formal and not-so-formal details to take into account when writing a scientific article as well as references that will help readers find more information in greater detail. Copyright © 2012 SERAM. Published by Elsevier Espana. All rights reserved.
Heuristics structure and pervade formal risk assessment.
MacGillivray, Brian H
2014-04-01
Lay perceptions of risk appear rooted more in heuristics than in reason. A major concern of the risk regulation literature is that such "error-strewn" perceptions may be replicated in policy, as governments respond to the (mis)fears of the citizenry. This has led many to advocate a relatively technocratic approach to regulating risk, characterized by high reliance on formal risk and cost-benefit analysis. However, through two studies of chemicals regulation, we show that the formal assessment of risk is pervaded by its own set of heuristics. These include rules to categorize potential threats, define what constitutes valid data, guide causal inference, and to select and apply formal models. Some of these heuristics lay claim to theoretical or empirical justifications, others are more back-of-the-envelope calculations, while still more purport not to reflect some truth but simply to constrain discretion or perform a desk-clearing function. These heuristics can be understood as a way of authenticating or formalizing risk assessment as a scientific practice, representing a series of rules for bounding problems, collecting data, and interpreting evidence (a methodology). Heuristics are indispensable elements of induction. And so they are not problematic per se, but they can become so when treated as laws rather than as contingent and provisional rules. Pitfalls include the potential for systematic error, masking uncertainties, strategic manipulation, and entrenchment. Our central claim is that by studying the rules of risk assessment qua rules, we develop a novel representation of the methods, conventions, and biases of the prior art. © 2013 Society for Risk Analysis.
Chambers, Joseph R.
2000-01-01
Established in 1917 as the nation#s first civil aeronautics research laboratory under the National Advisory Commit-tee for Aeronautics (NACA), Langley was a small laboratory that solved the problems of flight for military and civil aviation. Throughout history, Langley has maintained a working partnership with the Department of Defense, U.S. industry, universities, and other government agencies to support the defense of the nation with research. During World War II, Langley directed virtually all of its workforce and facilities to research for military aircraft. Following the war, a balanced program of military and civil projects was undertaken. In some instances Langley research from one aircraft program helped solve a problem in another. At the conclusion of some programs, Langley obtained the research models for additional tests to learn more about previously unknown phenomena. The data also proved useful in later developmental programs. Many of the military aircraft in the U.S. inventory as of late 1999 were over 20 years old. Langley activities that contributed to the development of some of these aircraft began over 50 years prior. This publication documents the role, from early concept stages to problem solving for fleet aircraft, that Langley played in the military aircraft fleet of the United States for the 1990's.
Formal Institutions and Subjective Wellbeing
DEFF Research Database (Denmark)
Bjørnskov, Christian; Dreher, Axel; Fischer, Justina A.V.
2010-01-01
A long tradition in economics explores the association between the quality of formal institutions and economic performance. The literature on the relationship between such institutions and happiness is, however, rather limited, and inconclusive. In this paper, we revisit the findings from recent...... cross-country studies on the institution-happiness association. Our findings suggest that their conclusions are qualitatively rather insensitive to the specific measure of 'happiness' used, while the associations between formal institutions and subjective well-being differ among poor and rich countries....... Separating different types of institutional quality, we find that in low-income countries the effects of economic-judicial institutions on happiness dominate those of political institutions, while analyses restricted to middle- and high-income countries show strong support for an additional beneficial effect...
Contextual approach to quantum formalism
Khrennikov, Andrei
2009-01-01
The aim of this book is to show that the probabilistic formalisms of classical statistical mechanics and quantum mechanics can be unified on the basis of a general contextual probabilistic model. By taking into account the dependence of (classical) probabilities on contexts (i.e. complexes of physical conditions), one can reproduce all distinct features of quantum probabilities such as the interference of probabilities and the violation of Bell’s inequality. Moreover, by starting with a formula for the interference of probabilities (which generalizes the well known classical formula of total probability), one can construct the representation of contextual probabilities by complex probability amplitudes or, in the abstract formalism, by normalized vectors of the complex Hilbert space or its hyperbolic generalization. Thus the Hilbert space representation of probabilities can be naturally derived from classical probabilistic assumptions. An important chapter of the book critically reviews known no-go theorems...
A Synthesized Framework for Formal Verification of Computing Systems
Directory of Open Access Journals (Sweden)
Nikola Bogunovic
2003-12-01
Full Text Available Design process of computing systems gradually evolved to a level that encompasses formal verification techniques. However, the integration of formal verification techniques into a methodical design procedure has many inherent miscomprehensions and problems. The paper explicates the discrepancy between the real system implementation and the abstracted model that is actually used in the formal verification procedure. Particular attention is paid to the seamless integration of all phases of the verification procedure that encompasses definition of the specification language and denotation and execution of conformance relation between the abstracted model and its intended behavior. The concealed obstacles are exposed, computationally expensive steps identified and possible improvements proposed.
Review of the helicity formalism
International Nuclear Information System (INIS)
Barreiro, F.; Cerrada, M.; Fernandez, E.
1972-01-01
Our purpose in these notes has been to present a brief and general review of the helicity formalism. We begin by discussing Lorentz invariance, spin and helicity ideas, in section 1 . In section 2 we deal with the construction of relativistic states and scattering amplitudes in the helicity basis and we study their transformation properties under discrete symmetries. Finally we present some more sophisticated topics like kinematical singularities of helicity amplitudes, kinematical constraints and crossing relations 3, 4, 5 respectively. (Author) 8 refs
Ashtekar formalism with real variables
International Nuclear Information System (INIS)
Kalau, W.; Nationaal Inst. voor Kernfysica en Hoge-Energiefysica
1990-12-01
A new approach to canonical gravity is presented which is based on the Ashtekar formalism. But, in contrast to Ashtekar's variables, this formulation does not need complex quantities nor does it lead to second class constraints. This is achieved using SO(3,1) as a gauge group instead of complexified SO(3). Because of the larger group additional first class constraints are needed which turn out to be cubic and quartic in the momenta. (author). 13 refs
Weber, Doug; Jamsek, Damir
1994-01-01
The goal of this task was to investigate how formal methods could be incorporated into a software engineering process for flight-control systems under DO-178B and to demonstrate that process by developing a formal specification for NASA's Guidance and Controls Software (GCS) Experiment. GCS is software to control the descent of a spacecraft onto a planet's surface. The GCS example is simplified from a real example spacecraft, but exhibits the characteristics of realistic spacecraft control software. The formal specification is written in Larch.
Canonical formalism for coupled beam optics
International Nuclear Information System (INIS)
Kheifets, S.A.
1989-09-01
Beam optics of a lattice with an inter-plane coupling is treated using canonical Hamiltonian formalism. The method developed is equally applicable both to a circular (periodic) machine and to an open transport line. A solution of the equation of a particle motion (and correspondingly transfer matrix between two arbitrary points of the lattice) are described in terms of two amplitude functions (and their derivatives and corresponding phases of oscillations) and four coupling functions, defined by a solution of the system of the first-order nonlinear differential equations derived in the paper. Thus total number of independent parameters is equal to ten. 8 refs
Effective operator formalism for open quantum systems
DEFF Research Database (Denmark)
Reiter, Florentin; Sørensen, Anders Søndberg
2012-01-01
We present an effective operator formalism for open quantum systems. Employing perturbation theory and adiabatic elimination of excited states for a weakly driven system, we derive an effective master equation which reduces the evolution to the ground-state dynamics. The effective evolution...... involves a single effective Hamiltonian and one effective Lindblad operator for each naturally occurring decay process. Simple expressions are derived for the effective operators which can be directly applied to reach effective equations of motion for the ground states. We compare our method...
Informal Versus Formal Search : Which Yields a Better Pay?
Semih Tumen
2015-01-01
Estimates on the effect of job contact method – i.e., informal versus formal search – on wage offers vary considerably across studies, with some of them finding a positive correlation between getting help from informal connections and obtaining high-paying jobs, while others finding a negative one. In this paper, I theoretically investigate the sources of discrepancies in these empirical results. Using a formal job search framework, I derive an equilibrium wage distribution which reveals that...
Improved pion pion scattering amplitude from dispersion relation formalism
International Nuclear Information System (INIS)
Cavalcante, I.P.; Coutinho, Y.A.; Borges, J. Sa
2005-01-01
Pion-pion scattering amplitude is obtained from Chiral Perturbation Theory at one- and two-loop approximations. Dispersion relation formalism provides a more economic method, which was proved to reproduce the analytical structure of that amplitude at both approximation levels. This work extends the use of the formalism in order to compute further unitarity corrections to partial waves, including the D-wave amplitude. (author)
Waszak, Martin R.; Barthelemy, Jean-Francois; Jones, Kenneth M.; Silcox, Richard J.; Silva, Walter A.; Nowaczyk, Ronald H.
1998-01-01
Multidisciplinary analysis and design is inherently a team activity due to the variety of required expertise and knowledge. As a team activity, multidisciplinary research cannot escape the issues that affect all teams. The level of technical diversity required to perform multidisciplinary analysis and design makes the teaming aspects even more important. A study was conducted at the NASA Langley Research Center to develop a model of multidiscipline teams that can be used to help understand their dynamics and identify key factors that influence their effectiveness. The study sought to apply the elements of systems thinking to better understand the factors, both generic and Langley-specific, that influence the effectiveness of multidiscipline teams. The model of multidiscipline research teams developed during this study has been valuable in identifying means to enhance team effectiveness, recognize and avoid problem behaviors, and provide guidance for forming and coordinating multidiscipline teams.
Everhart, Joel L.; Ashby, George C., Jr.; Monta, William J.
1992-01-01
A propulsion/airframe integration experiment conducted in the NASA Langley 20-Inch Mach 6 Tunnel using a 16.8-in.-long version of the Langley Test Technique Demonstrator configuration with simulated scramjet propulsion is described. Schlieren and vapor screen visualization of the nozzle flow field is presented and correlated with pitot-pressure flow-field surveys. The data were obtained at nominal free-stream conditions of Re = 2.8 x 10 exp 6 and a nominal engine total pressure of 100 psia. It is concluded that pitot-pressure surveys coupled to schlieren and vapor-screen photographs, and oil flows have revealed flow features including vortices, free shear layers, and shock waves occurring in the model flow field.
Formal Verification of Continuous Systems
DEFF Research Database (Denmark)
Sloth, Christoffer
2012-01-01
and the verification procedures should be algorithmically synthesizable. Autonomous control plays an important role in many safety-critical systems. This implies that a malfunction in the control system can have catastrophic consequences, e.g., in space applications where a design flaw can result in large economic...... losses. Furthermore, a malfunction in the control system of a surgical robot may cause death of patients. The previous examples involve complex systems that are required to operate according to complex specifications. The systems cannot be formally verified by modern verification techniques, due...
Measuring the effect of formalization
International Nuclear Information System (INIS)
Stoelen, K.; Mohn, P.
1998-01-01
We present an ongoing research activity concerned with measuring the effect of an increased level of formalization in software development. We summarize the experiences from a first experimental development. Based on these experiences, we discuss a number of technical issues; in particular, problems connected to metrics based on fault reports. First of all, what is a fault? Secondly, how should the fault counting be integrated in the development process? Thirdly, any reasonable definition of fault depends on a notion of satisfaction. Hence, we must address the question: What does it mean for a specification or an implementation to satisfy a requirement imposed by a more high-level specification? (author)
Formalization in Component Based Development
DEFF Research Database (Denmark)
Holmegaard, Jens Peter; Knudsen, John; Makowski, Piotr
2006-01-01
We present a unifying conceptual framework for components, component interfaces, contracts and composition of components by focusing on the collection of properties or qualities that they must share. A specific property, such as signature, functionality behaviour or timing is an aspect. Each aspect...... may be specified in a formal language convenient for its purpose and, in principle, unrelated to languages for other aspects. Each aspect forms its own semantic domain, although a semantic domain may be parameterized by values derived from other aspects. The proposed conceptual framework is introduced...
Asymmetric Formal Synthesis of Azadirachtin.
Mori, Naoki; Kitahara, Takeshi; Mori, Kenji; Watanabe, Hidenori
2015-12-01
An asymmetric formal synthesis of azadirachtin, a potent insect antifeedant, was accomplished in 30 steps to Ley's synthetic intermediate (longest linear sequence). The synthesis features: 1) rapid access to the optically active right-hand segment starting from the known 5-hydroxymethyl-2-cyclopentenone scaffold; 2) construction of the B and E rings by a key intramolecular tandem radical cyclization; 3) formation of the hemiacetal moiety in the C ring through the α-oxidation of the six-membered lactone followed by methanolysis. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Zharinov, V. V.
2013-02-01
We propose a formal construction generalizing the classic de Rham complex to a wide class of models in mathematical physics and analysis. The presentation is divided into a sequence of definitions and elementary, easily verified statements; proofs are therefore given only in the key case. Linear operations are everywhere performed over a fixed number field {F} = {R},{C}. All linear spaces, algebras, and modules, although not stipulated explicitly, are by definition or by construction endowed with natural locally convex topologies, and their morphisms are continuous.
2000-01-01
This report contains highlights of some of the major accomplishments and applications made by NASA Langley Research Center and its university partners and industry colleagues during 1999. The highlights illustrate the broad range of research and technology activities carried out by NASA Langley and the contributions of this work toward maintaining United States' leadership in aeronautics and space research. The Center's historic national role since 1917 continues in Aerospace Technology research with an additional major role in Earth Science research. Langley also partners closely with other NASA Centers and the Jet Propulsion Laboratory in Space Science and the Human Exploration and Development of Space. A color version is available at http://larcpubs.larc.nasa.gov/randt/1999/. For further information, contact Dennis Bushnell, Senior Scientist, Mail Stop 110, NASA Langley Research Center, Hampton, Virginia 23681-2199, (757)-864-8987, e-mail address: d.m.bushnell@larc.nasa.gov.
Can formal methods make automotive business sense? A classification of formal methods
McElligott, Pat; Mjeda, Anila; Thiel, Steffen
2008-01-01
peer-reviewed Legislative bodies are directing that automotive products comply with stringent safety levels. The liability for the safety of passengers in an automobile has traditionally been quite complex. Other transport sectors are externally regulated, and liability lies with the manufacturer or the transport service provider. The automotive industry is self-regulated and the individual driver carries a significant liability. Software and electronics increasingly provide greater con...
The MODUS Approach to Formal Verification
Directory of Open Access Journals (Sweden)
Brewka Lukasz
2014-03-01
Full Text Available Background: Software reliability is of great importance for the development of embedded systems that are often used in applications that have requirements for safety. Since the life cycle of embedded products is becoming shorter, productivity and quality simultaneously required and closely in the process of providing competitive products Objectives: In relation to this, MODUS (Method and supporting toolset advancing embedded systems quality project aims to provide small and medium-sized businesses ways to improve their position in the embedded market through a pragmatic and viable solution Methods/Approach: This paper will describe the MODUS project with focus on the technical methodologies that can assist formal verification and formal model checking. Results: Based on automated analysis of the characteristics of the system and by controlling the choice of the existing opensource model verification engines, model verification producing inputs to be fed into these engines. Conclusions: The MODUS approach is aligned with present market needs; the familiarity with tools, the ease of use and compatibility/interoperability remain among the most important criteria when selecting the development environment for a project
Psychologist in non-formal education
Pavićević Miljana S.
2011-01-01
Learning is not limited to school time. It starts at birth and continues throughout the entire life. Equally important as formal education there are also non-formal and informal education. Any kind of learning outside the traditional school can be called informal. However, it is not easy to define non-formal education because it is being described differently, for example as an education movement, process, system… Projects and programs implemented under the name of non-formal education are of...
A survey of formal languages for contracts
DEFF Research Database (Denmark)
Hvitved, Tom
2010-01-01
In this short paper we present the current status on formal languages and models for contracts. By a formal model is meant an unambiguous and rigorous representation of contracts, in order to enable their automatic validation, execution, and analysis — activates that are collectively referred...... to as contract lifecycle management (CLM). We present a set of formalism requirements, which represent features that any ideal contract model should support, based on which we present a comparative survey of existing contract formalisms....
Canonical formalism for relativistic dynamics
International Nuclear Information System (INIS)
Penafiel-Nava, V.M.
1982-01-01
The possibility of a canonical formalism appropriate for a dynamical theory of isolated relativistic multiparticle systems involving scalar interactions is studied. It is shown that a single time-parameter structure satisfying the requirements of Poincare invariance and simultaneity of the constituents (global tranversality) can not be derived from a homogeneous Lagrangian. The dynamics is deduced initially from a non-homogeneous but singular Lagrangian designed to accommodate the global tranversality constraints with the equaltime plane associated to the total momentum of the system. An equivalent standard Lagrangian is used to generalize the parametrization procedure which is referred to an arbitrary geodesic in Minkowski space. The equations of motion and the definition of center of momentum are invariant with respect to the choice of geodesic and the entire formalism becomes separable. In the original 8N-dimensional phase-space, the symmetries of the Lagrangian give rise to a canonical realization of a fifteen-generator Lie algebra which is projected in the 6N dimensional hypersurface of dynamical motions. The time-component of the total momentum is thus reduced to a neutral element and the canonical Hamiltonian survives as the only generator for time-translations so that the no-interaction theorem becomes inapplicable
Formal analysis of design process dynamics
Bosse, T.; Jonker, C.M.; Treur, J.
2010-01-01
This paper presents a formal analysis of design process dynamics. Such a formal analysis is a prerequisite to come to a formal theory of design and for the development of automated support for the dynamics of design processes. The analysis was geared toward the identification of dynamic design
Formal Analysis of Design Process Dynamics
Bosse, T.; Jonker, C.M.; Treur, J.
2010-01-01
This paper presents a formal analysis of design process dynamics. Such a formal analysis is a prerequisite to come to a formal theory of design and for the development of automated support for the dynamics of design processes. The analysis was geared toward the identification of dynamic design
Formal Symplectic Groupoid of a Deformation Quantization
Karabegov, Alexander V.
2005-08-01
We give a self-contained algebraic description of a formal symplectic groupoid over a Poisson manifold M. To each natural star product on M we then associate a canonical formal symplectic groupoid over M. Finally, we construct a unique formal symplectic groupoid ‘with separation of variables’ over an arbitrary Kähler-Poisson manifold.
Formalizing the concept phase of product development
Schuts, M.; Hooman, J.
2015-01-01
We discuss the use of formal techniques to improve the concept phase of product realisation. As an industrial application, a new concept of interventional X-ray systems has been formalized, using model checking techniques and the simulation of formal models. cop. Springer International Publishing
Lifelong Learning to Empowerment: Beyond Formal Education
Carr, Alexis; Balasubramanian, K.; Atieno, Rosemary; Onyango, James
2018-01-01
This paper discusses the relevance of lifelong learning vis-à-vis the Sustainable Development Goals (SDGs) and stresses the need for an approach blending formal education, non-formal and informal learning. The role of Open and Distance Learning (ODL) in moving beyond formal education and the importance of integrating pedagogy, andragogy and…
General aviation crash safety program at Langley Research Center
Thomson, R. G.
1976-01-01
The purpose of the crash safety program is to support development of the technology to define and demonstrate new structural concepts for improved crash safety and occupant survivability in general aviation aircraft. The program involves three basic areas of research: full-scale crash simulation testing, nonlinear structural analyses necessary to predict failure modes and collapse mechanisms of the vehicle, and evaluation of energy absorption concepts for specific component design. Both analytical and experimental methods are being used to develop expertise in these areas. Analyses include both simplified procedures for estimating energy absorption capabilities and more complex computer programs for analysis of general airframe response. Full-scale tests of typical structures as well as tests on structural components are being used to verify the analyses and to demonstrate improved design concepts.
Formal modeling of virtual machines
Cremers, A. B.; Hibbard, T. N.
1978-01-01
Systematic software design can be based on the development of a 'hierarchy of virtual machines', each representing a 'level of abstraction' of the design process. The reported investigation presents the concept of 'data space' as a formal model for virtual machines. The presented model of a data space combines the notions of data type and mathematical machine to express the close interaction between data and control structures which takes place in a virtual machine. One of the main objectives of the investigation is to show that control-independent data type implementation is only of limited usefulness as an isolated tool of program development, and that the representation of data is generally dictated by the control context of a virtual machine. As a second objective, a better understanding is to be developed of virtual machine state structures than was heretofore provided by the view of the state space as a Cartesian product.
A Formal Calculus for Categories
DEFF Research Database (Denmark)
Cáccamo, Mario José
This dissertation studies the logic underlying category theory. In particular we present a formal calculus for reasoning about universal properties. The aim is to systematise judgements about functoriality and naturality central to categorical reasoning. The calculus is based on a language which...... extends the typed lambda calculus with new binders to represent universal constructions. The types of the languages are interpreted as locally small categories and the expressions represent functors. The logic supports a syntactic treatment of universality and duality. Contravariance requires a definition...... of universality generous enough to deal with functors of mixed variance. Ends generalise limits to cover these kinds of functors and moreover provide the basis for a very convenient algebraic manipulation of expressions. The equational theory of the lambda calculus is extended with new rules for the definitions...
Formal analysis of physical theories
International Nuclear Information System (INIS)
Dalla Chiara, M.L.; Toraldo di Francia, G.
1979-01-01
The rules of inference that are made use of in formalization are considered. It is maintained that a physical law represents the universal assertion of a probability, and not the assessment of the probability of a universal assertion. The precision of the apparatus used to collect the experimental evidence is introduced as an essential part of the theoretical structure of physics. This approach allows the author to define the concept of truth in a satisfactory way, abandoning the unacceptable notion of approximate truth. It is shown that a considerable amount of light can be shed on a number of much debated problems arising in the logic of quantum mechanics. It is stressed that the deductive structure of quantum theory seems to be essentially founded on a kind of mixture of different logics. Two different concepts of truth are distinguished within quantum theory, an empirical truth and quantum-logical truth. (Auth.)
Adolescent thinking ála Piaget: The formal stage.
Dulit, E
1972-12-01
Two of the formal-stage experiments of Piaget and Inhelder, selected largely for their closeness to the concepts defining the stage, were replicated with groups of average and gifted adolescents. This report describes the relevant Piagetian concepts (formal stage, concrete stage) in context, gives the methods and findings of this study, and concludes with a section discussing implications and making some reformulations which generally support but significantly qualify some of the central themes of the Piaget-Inhelder work. Fully developed formal-stage thinking emerges as far from commonplace among normal or average adolescents (by marked contrast with the impression created by the Piaget-Inhelder text, which chooses to report no middle or older adolescents who function at less than fully formal levels). In this respect, the formal stage differs appreciably from the earlier Piagetian stages, and early adolescence emerges as the age for which a "single path" model of cognitive development becomes seriously inadequate and a more complex model becomes essential. Formal-stage thinking seems best conceptualized, like most other aspects of psychological maturity, as a potentiality only partially attained by most and fully attained only by some.
Matching biomedical ontologies based on formal concept analysis.
Zhao, Mengyi; Zhang, Songmao; Li, Weizhuo; Chen, Guowei
2018-03-19
The goal of ontology matching is to identify correspondences between entities from different yet overlapping ontologies so as to facilitate semantic integration, reuse and interoperability. As a well developed mathematical model for analyzing individuals and structuring concepts, Formal Concept Analysis (FCA) has been applied to ontology matching (OM) tasks since the beginning of OM research, whereas ontological knowledge exploited in FCA-based methods is limited. This motivates the study in this paper, i.e., to empower FCA with as much as ontological knowledge as possible for identifying mappings across ontologies. We propose a method based on Formal Concept Analysis to identify and validate mappings across ontologies, including one-to-one mappings, complex mappings and correspondences between object properties. Our method, called FCA-Map, incrementally generates a total of five types of formal contexts and extracts mappings from the lattices derived. First, the token-based formal context describes how class names, labels and synonyms share lexical tokens, leading to lexical mappings (anchors) across ontologies. Second, the relation-based formal context describes how classes are in taxonomic, partonomic and disjoint relationships with the anchors, leading to positive and negative structural evidence for validating the lexical matching. Third, the positive relation-based context can be used to discover structural mappings. Afterwards, the property-based formal context describes how object properties are used in axioms to connect anchor classes across ontologies, leading to property mappings. Last, the restriction-based formal context describes co-occurrence of classes across ontologies in anonymous ancestors of anchors, from which extended structural mappings and complex mappings can be identified. Evaluation on the Anatomy, the Large Biomedical Ontologies, and the Disease and Phenotype track of the 2016 Ontology Alignment Evaluation Initiative campaign
Schwier, Richard A.; Seaton, J. X.
2013-01-01
Does learner participation vary depending on the learning context? Are there characteristic features of participation evident in formal, non-formal, and informal online learning environments? Six online learning environments were chosen as epitomes of formal, non-formal, and informal learning contexts and compared. Transcripts of online…
Combining Formal Logic and Machine Learning for Sentiment Analysis
DEFF Research Database (Denmark)
Petersen, Niklas Christoffer; Villadsen, Jørgen
2014-01-01
This paper presents a formal logical method for deep structural analysis of the syntactical properties of texts using machine learning techniques for efficient syntactical tagging. To evaluate the method it is used for entity level sentiment analysis as an alternative to pure machine learning...
Chayanopparat Piyanan; Charungkaittikul Suwithida; Ratana-Ubol Archanya
2016-01-01
Non-formal vocational education provides practical experiences in a particular occupational field to non-formal semi-skilled learners. Non-formal vocational teachers are the key persons to deliver particular occupational knowledge. The essential competencies enhancement for non-sformal vocational teachers will improve teaching performance. The question of the research is what the essential competencies for the nonformal vocational teachers are. The research method was 1) to review related lit...
Formal specification and animation of a water level monitoring system
International Nuclear Information System (INIS)
Jackson, P.S.; Stokes, P.A.
1993-03-01
This report describes the Vienna Development Method (VDM), which is a formal method for software specification and development. VDM evolved out of attempts to use mathematics in programming language specifications in order to avoid ambiguities in specifications written in natural language. This report also describes the use of VDM for a real-time application, where it is used to formally specify the requirements of a water level monitoring system. The procedures and techniques used to produce an executable form (animation) of the specification are covered. (Author)
A new approach for formal behavioral modeling of protection services in antivirus systems
Norouzi, Monire; Parsa, Saeed; Mahjur, Ali
2014-01-01
Formal method techniques provides a suitable platform for the software development in software systems. Formal methods and formal verification is necessary to prove the correctness and improve performance of software systems in various levels of design and implementation, too. Security Discussion is an important issue in computer systems. Since the antivirus applications have very important role in computer systems security, verifying these applications is very essential and necessary. In thi...
Applications of the Decoherence Formalism
Brun, Todd Andrew
In this work the decoherence formalism of quantum mechanics is explored and applied to a number of interesting problems in quantum physics. The boundary between quantum and classical physics is examined, and demonstration made that quantum histories corresponding to classical equations of motion become more probable for a broad class of models, including linear and nonlinear models of Brownian motion. The link between noise, dissipation, and decoherence is studied. This work is then applied to systems which classically exhibit dissipative chaotic dynamics. A theory is explicated for treating these systems, and the ideas are applied to a particular model of the forced, damped Duffing oscillator, which is chaotic for certain parameter values. Differences between classical and quantum chaos are examined, particularly differences arising in the structure of fractal strange attractors, and the conceptual difficulties in framing standard notions of chaos in a quantum system. A brief discussion of previous work on quantum chaos is included, and the differences between Hamiltonian and dissipative chaos pointed out; a somewhat different interpretation of quantum chaos from the standard one is suggested. A class of histories for quantum systems, in phase space rather than configuration space, is studied. Different ways of representing projections in phase space are discussed, and expressions for the probability of phase space histories are derived; conditions for such histories to decohere are also estimated in the semiclassical limit.
Quantum formalism for classical statistics
Wetterich, C.
2018-06-01
In static classical statistical systems the problem of information transport from a boundary to the bulk finds a simple description in terms of wave functions or density matrices. While the transfer matrix formalism is a type of Heisenberg picture for this problem, we develop here the associated Schrödinger picture that keeps track of the local probabilistic information. The transport of the probabilistic information between neighboring hypersurfaces obeys a linear evolution equation, and therefore the superposition principle for the possible solutions. Operators are associated to local observables, with rules for the computation of expectation values similar to quantum mechanics. We discuss how non-commutativity naturally arises in this setting. Also other features characteristic of quantum mechanics, such as complex structure, change of basis or symmetry transformations, can be found in classical statistics once formulated in terms of wave functions or density matrices. We construct for every quantum system an equivalent classical statistical system, such that time in quantum mechanics corresponds to the location of hypersurfaces in the classical probabilistic ensemble. For suitable choices of local observables in the classical statistical system one can, in principle, compute all expectation values and correlations of observables in the quantum system from the local probabilistic information of the associated classical statistical system. Realizing a static memory material as a quantum simulator for a given quantum system is not a matter of principle, but rather of practical simplicity.
NASA-Langley Research Center's Aircraft Condition Analysis and Management System Implementation
Frye, Mark W.; Bailey, Roger M.; Jessup, Artie D.
2004-01-01
This document describes the hardware implementation design and architecture of Aeronautical Radio Incorporated (ARINC)'s Aircraft Condition Analysis and Management System (ACAMS), which was developed at NASA-Langley Research Center (LaRC) for use in its Airborne Research Integrated Experiments System (ARIES) Laboratory. This activity is part of NASA's Aviation Safety Program (AvSP), the Single Aircraft Accident Prevention (SAAP) project to develop safety-enabling technologies for aircraft and airborne systems. The fundamental intent of these technologies is to allow timely intervention or remediation to improve unsafe conditions before they become life threatening.
Chambers, Joseph R.
2005-01-01
The goal of this publication is to provide an overview of the topic of revolutionary research in aeronautics at Langley, including many examples of research efforts that offer significant potential benefits, but have not yet been applied. The discussion also includes an overview of how innovation and creativity is stimulated within the Center, and a perspective on the future of innovation. The documentation of this topic, especially the scope and experiences of the example research activities covered, is intended to provide background information for future researchers.
Flow Control Research at NASA Langley in Support of High-Lift Augmentation
Sellers, William L., III; Jones, Gregory S.; Moore, Mark D.
2002-01-01
The paper describes the efforts at NASA Langley to apply active and passive flow control techniques for improved high-lift systems, and advanced vehicle concepts utilizing powered high-lift techniques. The development of simplified high-lift systems utilizing active flow control is shown to provide significant weight and drag reduction benefits based on system studies. Active flow control that focuses on separation, and the development of advanced circulation control wings (CCW) utilizing unsteady excitation techniques will be discussed. The advanced CCW airfoils can provide multifunctional controls throughout the flight envelope. Computational and experimental data are shown to illustrate the benefits and issues with implementation of the technology.
Assessment team report on flight-critical systems research at NASA Langley Research Center
Siewiorek, Daniel P. (Compiler); Dunham, Janet R. (Compiler)
1989-01-01
The quality, coverage, and distribution of effort of the flight-critical systems research program at NASA Langley Research Center was assessed. Within the scope of the Assessment Team's review, the research program was found to be very sound. All tasks under the current research program were at least partially addressing the industry needs. General recommendations made were to expand the program resources to provide additional coverage of high priority industry needs, including operations and maintenance, and to focus the program on an actual hardware and software system that is under development.
Evaluation of initial collector field performance at the Langley Solar Building Test Facility
Boyle, R. J.; Knoll, R. H.; Jensen, R. N.
1977-01-01
The thermal performance of the solar collector field for the NASA Langley Solar Building Test Facility is given for October 1976 through January 1977. An 1180 square meter solar collector field with seven collector designs helped to provide hot water for the building heating system and absorption air conditioner. The collectors were arranged in 12 rows with nominally 51 collectors per row. Heat transfer rates for each row are calculated and recorded along with sensor, insolation, and weather data every 5 minutes using a mini-computer. The agreement between the experimental and predicted collector efficiencies was generally within five percentage points.
What Determines Firms’ Decisions to Formalize?
Neil McCulloch; Günther G. Schulze; Janina Voss
2010-01-01
In this paper we analyze the decision of small and micro firms to formalize, i.e. to obtain business and other licenses in rural Indonesia. We use the rural investment climate survey (RICS) that consists of non-farm rural enterprises, most of them microenterprises, and analyze the effect of formalization on tax payments, corruption, access to credit and revenue, taking into account the endogeneity of the formalization decision to such benefits and costs. We show, contrary to most of the liter...
NON-FORMAL EDUCATION, OVEREDUCATION AND WAGES
SANDRA NIETO; RAÚL RAMOS
2013-01-01
Why do overeducated workers participate in non-formal education activities? Do not they suffer from an excess of education? Using microdata from the Spanish sample of the 2007 Adult Education Survey, we have found that overeducated workers participate more than the rest in non-formal education and that they earn higher wages than overeducated workers who did not participate. This result can be interpreted as evidence that non-formal education allows overeducated workers to acquire new abiliti...
Fundamentals of the Pure Spinor Formalism
Hoogeveen, Joost
2010-01-01
This thesis presents recent developments within the pure spinor formalism, which has simplified amplitude computations in perturbative string theory, especially when spacetime fermions are involved. Firstly the worldsheet action of both the minimal and the non-minimal pure spinor formalism is derived from first principles, i.e. from an action with two dimensional diffeomorphism and Weyl invariance. Secondly the decoupling of unphysical states in the minimal pure spinor formalism is proved
NON-FORMAL EDUCATION WITHIN THE FUNCTION OF RESPONSIBLE PARENTING
Directory of Open Access Journals (Sweden)
Dragana Bogavac
2017-06-01
Full Text Available The aim of this survey was to discover to what degree parental non-formal education is present within the function of responsible parenting. The questionnaire research method was used in the survey. For the purpose of this research a questionnaire of 13 questions was constructed relating to the forms of non-formal education, and another questionnaire of 10 questions relating to the parents’ expectations of non-formal education. The sample included 198 parents. Examination of the scores concerning the presence of certain forms of parental non-formal education realized in cooperation with the school leads to the conclusion that the parents possess a positive attitude towards non-formal education. The analysis showed that the parents’ expectations were not on a satisfactory level. According to the results, the fathers displayed a greater interest towards non-formal education (7.72±1.35 than the mothers (6.93±1.85, (p<0.05. Unemployed parents had a greater score (7.85±1.30 than the employed parents (7.22±1.71, (p<0.05. A difference in the acceptance of non-formal education in accordance with the level of formal education was also noticeable (p<0.001. Respondents with a high school degree displayed the highest level of acceptance (7.97±0.78, while the lowest interest was seen in respondents with an associate degree (6.41±2.29. Univariate linear regression analysis showed that statistically important predictors were: gender (OR: -0.23 (-1.24 – -0.33, p< 0.001, work status (OR: -0.14 (-1.24 – -0.01, < 0.05 and the level of formal education (OR: -0.33 (-0.81 – -0.34, p< 0.001. The final results lead to the conclusion that parental non-formal education supports the concept of lifelong education.
Formal language constrained path problems
Energy Technology Data Exchange (ETDEWEB)
Barrett, C.; Jacob, R.; Marathe, M.
1997-07-08
In many path finding problems arising in practice, certain patterns of edge/vertex labels in the labeled graph being traversed are allowed/preferred, while others are disallowed. Motivated by such applications as intermodal transportation planning, the authors investigate the complexity of finding feasible paths in a labeled network, where the mode choice for each traveler is specified by a formal language. The main contributions of this paper include the following: (1) the authors show that the problem of finding a shortest path between a source and destination for a traveler whose mode choice is specified as a context free language is solvable efficiently in polynomial time, when the mode choice is specified as a regular language they provide algorithms with improved space and time bounds; (2) in contrast, they show that the problem of finding simple paths between a source and a given destination is NP-hard, even when restricted to very simple regular expressions and/or very simple graphs; (3) for the class of treewidth bounded graphs, they show that (i) the problem of finding a regular language constrained simple path between source and a destination is solvable in polynomial time and (ii) the extension to finding context free language constrained simple paths is NP-complete. Several extensions of these results are presented in the context of finding shortest paths with additional constraints. These results significantly extend the results in [MW95]. As a corollary of the results, they obtain a polynomial time algorithm for the BEST k-SIMILAR PATH problem studied in [SJB97]. The previous best algorithm was given by [SJB97] and takes exponential time in the worst case.
Community Garden: A Bridging Program between Formal and Informal Learning
Datta, Ranjan
2016-01-01
Community garden activities can play a significant role in bridging formal and informal learning, particularly in urban children's science and environmental education. It promotes relational methods of learning, discussing, and practicing that will integrate food security, social interactions, community development, environmental activism, and…
Acquisition of Formal Operations: The Effects of Two Training Procedures.
Rosenthal, Doreen A.
1979-01-01
A study of 11- and 12-year-old girls indicates that either of two training procedures, method training or dimension training, can aid in the transition from concrete operational to formal operational thought by promoting a hypothesis-testing attitude. (BH)
Mathematic-Graphical Formalization of Switch Point Control Circuit Function
Directory of Open Access Journals (Sweden)
Juraj Zdansky
2004-01-01
Full Text Available This article describes authors designed method then enables mathematic – graphical formalization of system’s functional specification. The result of this method is algebraic system – finite automata that is written in transition table. This transition table is possible to overwrite to graphic form (state diagram or to mathematic form (transition and output function. This method is described by example of switch point control circuit.
Boyer, Charles M.; Jackson, Trevor P.; Beyon, Jeffrey Y.; Petway, Larry B.
2013-01-01
Optimized designs of the Navigation Doppler Lidar (NDL) instrument for Autonomous Landing Hazard Avoidance Technology (ALHAT) were accomplished via Interdisciplinary Design Concept (IDEC) at NASA Langley Research Center during the summer of 2013. Three branches in the Engineering Directorate and three students were involved in this joint task through the NASA Langley Aerospace Research Summer Scholars (LARSS) Program. The Laser Remote Sensing Branch (LRSB), Mechanical Systems Branch (MSB), and Structural and Thermal Systems Branch (STSB) were engaged to achieve optimal designs through iterative and interactive collaborative design processes. A preliminary design iteration was able to reduce the power consumption, mass, and footprint by removing redundant components and replacing inefficient components with more efficient ones. A second design iteration reduced volume and mass by replacing bulky components with excessive performance with smaller components custom-designed for the power system. Mechanical placement collaboration reduced potential electromagnetic interference (EMI). Through application of newly selected electrical components and thermal analysis data, a total electronic chassis redesign was accomplished. Use of an innovative forced convection tunnel heat sink was employed to meet and exceed project requirements for cooling, mass reduction, and volume reduction. Functionality was a key concern to make efficient use of airflow, and accessibility was also imperative to allow for servicing of chassis internals. The collaborative process provided for accelerated design maturation with substantiated function.
Barnes, Bruce W.; Sessions, Alaric M.; Beyon, Jeffrey; Petway, Larry B.
2014-01-01
Optimized designs of the Navigation Doppler Lidar (NDL) instrument for Autonomous Landing Hazard Avoidance Technology (ALHAT) were accomplished via Interdisciplinary Design Concept (IDEC) at NASA Langley Research Center during the summer of 2013. Three branches in the Engineering Directorate and three students were involved in this joint task through the NASA Langley Aerospace Research Summer Scholars (LARSS) Program. The Laser Remote Sensing Branch (LRSB), Mechanical Systems Branch (MSB), and Structural and Thermal Systems Branch (STSB) were engaged to achieve optimal designs through iterative and interactive collaborative design processes. A preliminary design iteration was able to reduce the power consumption, mass, and footprint by removing redundant components and replacing inefficient components with more efficient ones. A second design iteration reduced volume and mass by replacing bulky components with excessive performance with smaller components custom-designed for the power system. The existing power system was analyzed to rank components in terms of inefficiency, power dissipation, footprint and mass. Design considerations and priorities are compared along with the results of each design iteration. Overall power system improvements are summarized for design implementations.
Crasner, Aaron I.; Scola,Salvatore; Beyon, Jeffrey Y.; Petway, Larry B.
2014-01-01
Optimized designs of the Navigation Doppler Lidar (NDL) instrument for Autonomous Landing Hazard Avoidance Technology (ALHAT) were accomplished via Interdisciplinary Design Concept (IDEC) at NASA Langley Research Center during the summer of 2013. Three branches in the Engineering Directorate and three students were involved in this joint task through the NASA Langley Aerospace Research Summer Scholars (LARSS) Program. The Laser Remote Sensing Branch (LRSB), Mechanical Systems Branch (MSB), and Structural and Thermal Systems Branch (STSB) were engaged to achieve optimal designs through iterative and interactive collaborative design processes. A preliminary design iteration was able to reduce the power consumption, mass, and footprint by removing redundant components and replacing inefficient components with more efficient ones. A second design iteration reduced volume and mass by replacing bulky components with excessive performance with smaller components custom-designed for the power system. Thermal modeling software was used to run steady state thermal analyses, which were used to both validate the designs and recommend further changes. Analyses were run on each redesign, as well as the original system. Thermal Desktop was used to run trade studies to account for uncertainty and assumptions about fan performance and boundary conditions. The studies suggested that, even if the assumptions were significantly wrong, the redesigned systems would remain within operating temperature limits.
Formal Solutions for Polarized Radiative Transfer. III. Stiffness and Instability
Janett, Gioele; Paganini, Alberto
2018-04-01
Efficient numerical approximation of the polarized radiative transfer equation is challenging because this system of ordinary differential equations exhibits stiff behavior, which potentially results in numerical instability. This negatively impacts the accuracy of formal solvers, and small step-sizes are often necessary to retrieve physical solutions. This work presents stability analyses of formal solvers for the radiative transfer equation of polarized light, identifies instability issues, and suggests practical remedies. In particular, the assumptions and the limitations of the stability analysis of Runge–Kutta methods play a crucial role. On this basis, a suitable and pragmatic formal solver is outlined and tested. An insightful comparison to the scalar radiative transfer equation is also presented.
DNA expressions - A formal notation for DNA
Vliet, Rudy van
2015-01-01
We describe a formal notation for DNA molecules that may contain nicks and gaps. The resulting DNA expressions denote formal DNA molecules. Different DNA expressions may denote the same molecule. Such DNA expressions are called equivalent. We examine which DNA expressions are minimal, which
Formalizing Evaluation in Music Information Retrieval
DEFF Research Database (Denmark)
Sturm, Bob L.
2013-01-01
We develop a formalism to disambiguate the evaluation of music information retrieval systems. We define a ``system,'' what it means to ``analyze'' one, and make clear the aims, parts, design, execution, interpretation, and assumptions of its ``evaluation.'' We apply this formalism to discuss...
37 CFR 251.41 - Formal hearings.
2010-07-01
... ARBITRATION ROYALTY PANEL RULES AND PROCEDURES COPYRIGHT ARBITRATION ROYALTY PANEL RULES OF PROCEDURE Procedures of Copyright Arbitration Royalty Panels § 251.41 Formal hearings. (a) The formal hearings that will be conducted under the rules of this subpart are rate adjustment hearings and royalty fee...
Restorative Practices as Formal and Informal Education
Carter, Candice C.
2013-01-01
This article reviews restorative practices (RP) as education in formal and informal contexts of learning that are fertile sites for cultivating peace. Formal practices involve instruction about response to conflict, while informal learning occurs beyond academic lessons. The research incorporated content analysis and a critical examination of the…
Multiverse in the Third Quantized Formalism
International Nuclear Information System (INIS)
Faizal Mir
2014-01-01
In this paper we will analyze the third quantization of gravity in path integral formalism. We will use the time-dependent version of Wheeler—DeWitt equation to analyze the multiverse in this formalism. We will propose a mechanism for baryogenesis to occur in the multiverse, without violating the baryon number conservation. (general)
Formal balancing of chemical reaction networks
van der Schaft, Abraham; Rao, S.; Jayawardhana, B.
2016-01-01
In this paper we recall and extend the main results of Van der Schaft, Rao, Jayawardhana (2015) concerning the use of Kirchhoff’s Matrix Tree theorem in the explicit characterization of complex-balanced reaction networks and the notion of formal balancing. The notion of formal balancing corresponds
The simplest formal argument for fitness optimization
Indian Academy of Sciences (India)
The Formal Darwinism Project aims to provide a formal argument linking population genetics to fitness optimization, which of necessity includes defining fitness. This bridges the gulf between those biologists who assume that natural selection leads to something close to fitness optimization and those biologists who believe ...
Opinion dynamics model based on quantum formalism
Energy Technology Data Exchange (ETDEWEB)
Artawan, I. Nengah, E-mail: nengahartawan@gmail.com [Theoretical Physics Division, Department of Physics, Udayana University (Indonesia); Trisnawati, N. L. P., E-mail: nlptrisnawati@gmail.com [Biophysics, Department of Physics, Udayana University (Indonesia)
2016-03-11
Opinion dynamics model based on quantum formalism is proposed. The core of the quantum formalism is on the half spin dynamics system. In this research the implicit time evolution operators are derived. The analogy between the model with Deffuant dan Sznajd models is discussed.
A computational formalization for partial evaluation
DEFF Research Database (Denmark)
Hatcliff, John; Danvy, Olivier
1997-01-01
We formalize a partial evaluator for Eugenio Moggi's computational metalanguage. This formalization gives an evaluation-order independent view of binding-time analysis and program specialization, including a proper treatment of call unfolding. It also enables us to express the essence of `control...
Rapid Prototyping of Formally Modelled Distributed Systems
Buchs, Didier; Buffo, Mathieu; Titsworth, Frances M.
1999-01-01
This paper presents various kinds of prototypes, used in the prototyping of formally modelled distributed systems. It presents the notions of prototyping techniques and prototype evolution, and shows how to relate them to the software life-cycle. It is illustrated through the use of the formal modelling language for distributed systems CO-OPN/2.
Formal analysis of a fair payment protocol
J.G. Cederquist; M.T. Dashti (Mohammad)
2004-01-01
textabstractWe formally specify a payment protocol. This protocol is intended for fair exchange of time-sensitive data. Here the ?-CRL language is used to formalize the protocol. Fair exchange properties are expressed in the regular alternation-free ?-calculus. These properties are then verified
Formal Analysis of a Fair Payment Protocol
Cederquist, J.G.; Dashti, M.T.
2004-01-01
We formally specify a payment protocol. This protocol is intended for fair exchange of timesensitive data. Here the μCRL language is used to formalize the protocol. Fair exchange properties are expressed in the regular alternation-free μ-calculus. These properties are then verified using the finite
Formal Analysis of a Fair Payment Protocol
Cederquist, J.G.; Dashti, Muhammad Torabi; Dimitrakos, Theo; Martinelli, Fabio
We formally specify a payment protocol described by Vogt et al. This protocol is intended for fair exchange of time-sensitive data. Here the mCRL language is used to formalize the protocol. Fair exchange properties are expressed in the regular alternation-free mu-calculus. These properties are then
A Conceptual Formalization of Crosscutting in AOSD
van den Berg, Klaas; Conejero, J.M.
2005-01-01
We propose a formalization of crosscutting based on a conceptual framework for AOSD. Crosscutting is clearly distinguished from the related concepts scattering and tangling. The definitions of these concepts are formalized and visualized with matrices and matrix operations. This allows more precise
Formal representation of complex SNOMED CT expressions
Directory of Open Access Journals (Sweden)
Markó Kornél
2008-10-01
Full Text Available Abstract Background Definitory expressions about clinical procedures, findings and diseases constitute a major benefit of a formally founded clinical reference terminology which is ontologically sound and suited for formal reasoning. SNOMED CT claims to support formal reasoning by description-logic based concept definitions. Methods On the basis of formal ontology criteria we analyze complex SNOMED CT concepts, such as "Concussion of Brain with(out Loss of Consciousness", using alternatively full first order logics and the description logic ℰℒ MathType@MTEF@5@5@+=feaagaart1ev2aaatCvAUfKttLearuWrP9MDH5MBPbIqV92AaeXatLxBI9gBaebbnrfifHhDYfgasaacPC6xNi=xH8viVGI8Gi=hEeeu0xXdbba9frFj0xb9qqpG0dXdb9aspeI8k8fiI+fsY=rqGqVepae9pg0db9vqaiVgFr0xfr=xfr=xc9adbaqaaeGaciGaaiaabeqaaeqabiWaaaGcbaWenfgDOvwBHrxAJfwnHbqeg0uy0HwzTfgDPnwy1aaceaGae8hmHuKae8NeHWeaaa@37B1@. Results Typical complex SNOMED CT concepts, including negations or not, can be expressed in full first-order logics. Negations cannot be properly expressed in the description logic ℰℒ MathType@MTEF@5@5@+=feaagaart1ev2aaatCvAUfKttLearuWrP9MDH5MBPbIqV92AaeXatLxBI9gBaebbnrfifHhDYfgasaacPC6xNi=xH8viVGI8Gi=hEeeu0xXdbba9frFj0xb9qqpG0dXdb9aspeI8k8fiI+fsY=rqGqVepae9pg0db9vqaiVgFr0xfr=xfr=xc9adbaqaaeGaciGaaiaabeqaaeqabiWaaaGcbaWenfgDOvwBHrxAJfwnHbqeg0uy0HwzTfgDPnwy1aaceaGae8hmHuKae8NeHWeaaa@37B1@ underlying SNOMED CT. All concepts concepts the meaning of which implies a temporal scope may be subject to diverging interpretations, which are often unclear in SNOMED CT as their contextual determinants are not made explicit. Conclusion The description of complex medical occurrents is ambiguous, as the same situations can be described as (i a complex occurrent C that has A and B as temporal parts, (ii a simple occurrent A' defined as a kind of A followed by some B, or (iii a simple occurrent B' defined as a kind of B preceded by some A. As negative statements in SNOMED CT cannot be exactly represented without
SBME : Exploring boundaries between formal, non-formal, and informal learning
Shahoumian, Armineh; Parchoma, Gale; Saunders, Murray; Hanson, Jacky; Dickinson, Mike; Pimblett, Mark
2013-01-01
In medical education learning extends beyond university settings into practice. Non-formal and informal learning support learners’ efforts to meet externally set and learner-identified objectives. In SBME research, boundaries between formal, non-formal, and informal learning have not been widely explored. Whether SBME fits within or challenges these categories can make a contribution. Formal learning is described in relation to educational settings, planning, assessment, and accreditation. In...
Improving Learner Outcomes in Lifelong Education: Formal Pedagogies in Non-Formal Learning Contexts?
Zepke, Nick; Leach, Linda
2006-01-01
This article explores how far research findings about successful pedagogies in formal post-school education might be used in non-formal learning contexts--settings where learning may not lead to formal qualifications. It does this by examining a learner outcomes model adapted from a synthesis of research into retention. The article first…
Kofroň, Jan; Tumova, Jana
2017-01-01
These are the proceedings of the 14th International Workshop on Formal Engineering approaches to Software Components and Architectures (FESCA). The workshop was held on April 22, 2017 in Uppsala (Sweden) as a satellite event to the European Joint Conference on Theory and Practice of Software (ETAPS'17). The aim of the FESCA workshop is to bring together junior researchers from formal methods, software engineering, and industry interested in the development and application of formal modelling ...
Buhnova, Barbora; Happe, Lucia; Kofroň, Jan
2013-01-01
These are the proceedings of the 10th International Workshop on Formal Engineering approaches to Software Components and Architectures (FESCA). The workshop was held on March 23, 2013 in Rome (Italy) as a satellite event to the European Joint Conference on Theory and Practice of Software (ETAPS'13). The aim of the FESCA workshop is to bring together both young and senior researchers from formal methods, software engineering, and industry interested in the development and application of formal...
Jacob, Bridgette L.
2013-01-01
The difficulties introductory statistics students have with formal statistical inference are well known in the field of statistics education. "Informal" statistical inference has been studied as a means to introduce inferential reasoning well before and without the formalities of formal statistical inference. This mixed methods study…
Colloquium: Mechanical formalisms for tissue dynamics.
Tlili, Sham; Gay, Cyprien; Graner, François; Marcq, Philippe; Molino, François; Saramito, Pierre
2015-05-01
The understanding of morphogenesis in living organisms has been renewed by tremendous progress in experimental techniques that provide access to cell scale, quantitative information both on the shapes of cells within tissues and on the genes being expressed. This information suggests that our understanding of the respective contributions of gene expression and mechanics, and of their crucial entanglement, will soon leap forward. Biomechanics increasingly benefits from models, which assist the design and interpretation of experiments, point out the main ingredients and assumptions, and ultimately lead to predictions. The newly accessible local information thus calls for a reflection on how to select suitable classes of mechanical models. We review both mechanical ingredients suggested by the current knowledge of tissue behaviour, and modelling methods that can help generate a rheological diagram or a constitutive equation. We distinguish cell scale ("intra-cell") and tissue scale ("inter-cell") contributions. We recall the mathematical framework developed for continuum materials and explain how to transform a constitutive equation into a set of partial differential equations amenable to numerical resolution. We show that when plastic behaviour is relevant, the dissipation function formalism appears appropriate to generate constitutive equations; its variational nature facilitates numerical implementation, and we discuss adaptations needed in the case of large deformations. The present article gathers theoretical methods that can readily enhance the significance of the data to be extracted from recent or future high throughput biomechanical experiments.
Semantic Network and Frame Knowledge Representation Formalisms in Artificial Intelligence
Rashid, Pshtiwan Qader
2015-01-01
ABSTRACT: Choosing a suitable method to represent the knowledge concerning the real world is one of the major issues involved in Artificial Intelligence. The purpose of this research is to consider the important beneficial roles of semantic network and frame formalisms for knowledge representation in Artificial Intelligence. The basic properties of the above methods for appropriate structuring and arranging the knowledge are presented. Some types of relationships, the conceptual graph...
Products of composite operators in the exact renormalization group formalism
Pagani, C.; Sonoda, H.
2018-02-01
We discuss a general method of constructing the products of composite operators using the exact renormalization group formalism. Considering mainly the Wilson action at a generic fixed point of the renormalization group, we give an argument for the validity of short-distance expansions of operator products. We show how to compute the expansion coefficients by solving differential equations, and test our method with some simple examples.
Construction of vertex operators using operator formalism techniques
International Nuclear Information System (INIS)
Gato, B.; Massachusetts Inst. of Tech., Cambridge
1989-01-01
We derive vertex operators in oscillator form as an application of the conserved charges method developed by Vafa for the operator formalism in higher genus Riemann surfaces. This construction proves to be clear, direct and valid for the bosonic and fermionic strings as wells as for twisted strings on orbifolds. We discuss the method and construct vertex operators for the bosonic string moving on Z N orbifolds and for the fermionic string in the NSR formulation. (orig.)
Formal Semantics: Origins, Issues, Early Impact
Directory of Open Access Journals (Sweden)
Barbara H. Partee
2010-12-01
Psychology’, 183–216. Cambridge: Cambridge University Press.Chomsky, N. 1975. ‘Questions of form and interpretation’. In R. Austerlitz (ed. ‘The Scope of American Linguistics’, 159–196. Lisse: Peter de Ridder Press.Church, A. 1940. ‘A formulation of the simple theory of types’. Journal of Symbolic Logic 5: 56–68.http://dx.doi.org/10.2307/2266170Church, A. 1951. ‘A formulation of the logic of sense and denotation’. In P. Henle, H. Kallen & S. Langer (eds. ‘Structure, Method, and Meaning: Essays in Honor of H.M. Sheffer’, 3–24. New York: Liberal Arts Press.Cocchiarella, N. 1997. ‘Formally-oriented work in the philosophy of language’. In J.V. Canfield (ed. ‘Philosophy of Meaning, Knowledge and Value in the 20th Century’, 39–75. London; New York: Routledge.Cresswell, M. J. 1978. ‘Semantic competence’. In F. Guenthner & M. Guenthner-Reutter (eds. ‘Meaning and Translation: Philosophical and Linguistic Approaches’, 9–43. London: Duckworth.Davidson, D. 1964. ‘Theories of meaning and learnable languages’. In ‘Proceedings of the 1964 International Congress for Logic, Methodology, and Philosophy of Science’, Jerusalem: North-Holland.Davidson, D. 1967. ‘The logical form of action sentences’. In N. Rescher (ed. ‘The Logic of Decision and Action’, 81–95. Pittsburgh: Pittsburgh University Press.Davidson, D. 1970. ‘Semantics for natural languages’. In B. Visentini (ed. ‘Linguaggi nella Societa e nella Tecnica’, Milan: Edizioni di Comunita.Dowty, D. 1978a. A Guide to Montague’s PTQ. Bloomington, IN: Indiana University Linguistics Club.Dowty, D. 1978b. ‘Governed transformations as lexical rules in a Montague Grammar’. Linguistic Inquiry 9: 393–426.Dowty, D., Wall, R. E. & Peters, S. Jr. 1981. Introduction to Montague Semantics. Dordrecht: Reidel.Feferman, A. Burdman & Feferman, S. 2004. Alfred Tarski: Life and Logic. Cambridge: Cambridge University Press.Fodor, J. 1961. ‘Projection and paraphrase in
Results from the FIN-2 formal comparison
Connolly, Paul; Hoose, Corinna; Liu, Xiaohong; Moehler, Ottmar; Cziczo, Daniel; DeMott, Paul
2017-04-01
During the Fifth International Ice Nucleation Workshop (FIN-2) at the AIDA Ice Nucleation facility in Karlsruhe, Germany in March 2015, a formal comparison of ice nucleation measurement methods was conducted. During the experiments the samples of ice nucleating particles were not revealed to the instrument scientists, hence this was referred to as a "blind comparison". The two samples used were later revealed to be Arizona Test Dust and an Argentina soil sample. For these two samples seven mobile ice nucleating particle counters sampled directly from the AIDA chamber or from the aerosol preparation chamber at specified temperatures, whereas filter samples were taken for two offline deposition nucleation instruments. Wet suspension methods for determining IN concentrations were also used with 10 different methods employed. For the wet suspension methods experiments were conducted using INPs collected from the air inside the chambers (impinger sampling) and INPs taken from the bulk samples (vial sampling). Direct comparisons of the ice nucleating particle concentrations are reported as well as derived ice nucleation active site densities. The study highlights the difficulties in performing such analyses, but generally indicates that there is reasonable agreement between the wet suspension techniques. It is noted that ice nucleation efficiency derived from the AIDA chamber (quantified using the ice active surface site density approach) is higher than that for the cold stage techniques. This is both true for the Argentina soil sample and, to a lesser extent, for the Arizona Test Dust sample too. Other interesting effects were noted: for the ATD the impinger sampling demonstrated higher INP efficiency at higher temperatures (>255 K) than the vial sampling, but agreed at the lower temperatures (<255K), whereas the opposite was true for the Argentina soil sample. The results are analysed to better understand the performance of the various techniques and to address any
SELF-EFFICACY OF FORMALLY AND NON-FORMALLY TRAINED PUBLIC SECTOR TEACHERS
Directory of Open Access Journals (Sweden)
Muhammad Nadeem ANWAR
2009-07-01
Full Text Available The main objective of the study was to compare the formally and non-formally trained in-service public sector teachers’ Self-efficacy. Five hypotheses were developed describing no difference in the self-efficacy of formally and non-formally trained teachers to influence decision making, influence school resources, instructional self-efficacy, disciplinary self-efficacy and create positive school climate. Teacher Efficacy Instrument (TSES developed by Bandura (2001 consisting of thirty 9-point items was used in the study. 342 formally trained and 255 non-formally trained respondents’ questionnaires were received out of 1500 mailed. The analysis of data revealed that the formally trained public sector teachers are high in their self-efficacy on all the five categories: to influence decision making, to influence school resources, instructional self-efficacy, disciplinary self-efficacy and self-efficacy to create positive school climate.
Noncommutativity and Duality through the Symplectic Embedding Formalism
Directory of Open Access Journals (Sweden)
Everton M.C. Abreu
2010-07-01
Full Text Available This work is devoted to review the gauge embedding of either commutative and noncommutative (NC theories using the symplectic formalism framework. To sum up the main features of the method, during the process of embedding, the infinitesimal gauge generators of the gauge embedded theory are easily and directly chosen. Among other advantages, this enables a greater control over the final Lagrangian and brings some light on the so-called ''arbitrariness problem''. This alternative embedding formalism also presents a way to obtain a set of dynamically dual equivalent embedded Lagrangian densities which is obtained after a finite number of steps in the iterative symplectic process, oppositely to the result proposed using the BFFT formalism. On the other hand, we will see precisely that the symplectic embedding formalism can be seen as an alternative and an efficient procedure to the standard introduction of the Moyal product in order to produce in a natural way a NC theory. In order to construct a pedagogical explanation of the method to the nonspecialist we exemplify the formalism showing that the massive NC U(1 theory is embedded in a gauge theory using this alternative systematic path based on the symplectic framework. Further, as other applications of the method, we describe exactly how to obtain a Lagrangian description for the NC version of some systems reproducing well known theories. Naming some of them, we use the procedure in the Proca model, the irrotational fluid model and the noncommutative self-dual model in order to obtain dual equivalent actions for these theories. To illustrate the process of noncommutativity introduction we use the chiral oscillator and the nondegenerate mechanics.
Overview of Dynamics Integration Research (DIR) program at Langley Research Center
Sliwa, Steven M.; Abel, Irving
1989-01-01
Research goals and objectives for an ongoing activity at Langley Research Center (LaRC) are described. The activity is aimed principally at dynamics optimization for aircraft. The effort involves active participation by the Flight Systems, Structures, and Electronics directorates at LaRC. The Functional Integration Technology (FIT) team has been pursuing related goals since 1985. A prime goal has been the integration and optimization of vehicle dynamics through collaboration at the basic principles or equation level. Some significant technical progress has been accomplished since then and is reflected here. An augmentation for this activity, Dynamics Integration Research (DIR), has been proposed to NASA Headquarters and is being considered for funding in FY 1990 or FY 1991.
Hemsch, Michael J.
1996-01-01
As part of a continuing effort to re-engineer the wind tunnel testing process, a comprehensive data quality assurance program is being established at NASA Langley Research Center (LaRC). The ultimate goal of the program is routing provision of tunnel-to-tunnel reproducibility with total uncertainty levels acceptable for test and evaluation of civilian transports. The operational elements for reaching such levels of reproducibility are: (1) statistical control, which provides long term measurement uncertainty predictability and a base for continuous improvement, (2) measurement uncertainty prediction, which provides test designs that can meet data quality expectations with the system's predictable variation, and (3) national standards, which provide a means for resolving tunnel-to-tunnel differences. The paper presents the LaRC design for the program and discusses the process of implementation.
Bellera, Carine A; Pulido, Marina; Gourgou, Sophie; Collette, Laurence; Doussau, Adélaïde; Kramar, Andrew; Dabakuyo, Tienhan Sandrine; Ouali, Monia; Auperin, Anne; Filleron, Thomas; Fortpied, Catherine; Le Tourneau, Christophe; Paoletti, Xavier; Mauer, Murielle; Mathoulin-Pélissier, Simone; Bonnetain, Franck
2013-03-01
In randomised phase III cancer clinical trials, the most objectively defined and only validated time-to-event endpoint is overall survival (OS). The appearance of new types of treatments and the multiplication of lines of treatment have resulted in the use of surrogate endpoints for overall survival such as progression-free survival (PFS), or time-to-treatment failure. Their development is strongly influenced by the necessity of reducing clinical trial duration, cost and number of patients. However, while these endpoints are frequently used, they are often poorly defined and definitions can differ between trials which may limit their use as primary endpoints. Moreover, this variability of definitions can impact on the trial's results by affecting estimation of treatments' effects. The aim of the Definition for the Assessment of Time-to-event Endpoints in CANcer trials (DATECAN) project is to provide recommendations for standardised definitions of time-to-event endpoints in randomised cancer clinical trials. We will use a formal consensus methodology based on experts' opinions which will be obtained in a systematic manner. Definitions will be independently developed for several cancer sites, including pancreatic, breast, head and neck and colon cancer, as well as sarcomas and gastrointestinal stromal tumours (GISTs). The DATECAN project should lead to the elaboration of recommendations that can then be used as guidelines by researchers participating in clinical trials. This process should lead to a standardisation of the definitions of commonly used time-to-event endpoints, enabling appropriate comparisons of future trials' results. Copyright © 2012 Elsevier Ltd. All rights reserved.
FORMAL MODELS OF LANGUAGE SYSTEMS
Directory of Open Access Journals (Sweden)
G. Chetverikov
2009-01-01
Full Text Available The basic construction concepts of unifying two-digit and multi-valued means of processing symbolic data are considered. The present approach is based upon a single methodological and special purpose principle by applying the proposed methods of the intelligence theory for mathematical input/output data and their intermediate transformations by an appropriate AFP-structure of the third grade.
A hydrodynamic formalism for Brownian systems
International Nuclear Information System (INIS)
Pina, E.; Rosales, M.A.
1981-01-01
A formal hydrodynamic approach to Brownian motion is presented and the corresponding equations are derived. Hydrodynamic quantities are expressed in terms of the physical variables characterizing the Brownian systems. Contact is made with the hydrodynamic model of Quantum Mechanics. (author)
Infinitesimal Deformations of a Formal Symplectic Groupoid
Karabegov, Alexander
2011-09-01
Given a formal symplectic groupoid G over a Poisson manifold ( M, π 0), we define a new object, an infinitesimal deformation of G, which can be thought of as a formal symplectic groupoid over the manifold M equipped with an infinitesimal deformation {π_0 + \\varepsilon π_1} of the Poisson bivector field π 0. To any pair of natural star products {(ast,tildeast)} having the same formal symplectic groupoid G we relate an infinitesimal deformation of G. We call it the deformation groupoid of the pair {(ast,tildeast)} . To each star product with separation of variables {ast} on a Kähler-Poisson manifold M we relate another star product with separation of variables {hatast} on M. We build an algorithm for calculating the principal symbols of the components of the logarithm of the formal Berezin transform of a star product with separation of variables {ast} . This algorithm is based upon the deformation groupoid of the pair {(ast,hatast)}.
Does Formal Environmental Knowledge Inform the Everyday ...
African Journals Online (AJOL)
How do senior secondary biology learners from three schools in Lesotho use this ... environmental literacy as a goal of science education is mentioned. ..... formal schooling context) or actions informed by informal information, which we ...
Towards a Formal Treatment of Implicit Invocation
National Research Council Canada - National Science Library
Dingel, J
1997-01-01
.... A formal computational model for implicit invocation is presented. We develop a verification framework for implicit invocation that is based on Jones' rely/guarantee reasoning for concurrent systems Jon83,St(phi)91...
Formal education of curriculum and instructional designers
McKenney, Susan; Visscher-Voerman, Irene
2013-01-01
McKenney, S., & Visscher-Voerman, I. (2013). Formal education of curriculum and instructional designers. Educational Designer, 2(6). Available online: http://www.educationaldesigner.org/ed/volume2/issue6/article20/index.htm
Transitions from Formal Education to the Workplace
Olson, Joann S.
2014-01-01
This chapter frames the transition to adulthood in the context of the moving from formal educational settings to the often less-structured learning that occurs in workplace settings. Although schooling may end, learning continues.
Statistical Survey of Non-Formal Education
Directory of Open Access Journals (Sweden)
Ondřej Nývlt
2012-12-01
Full Text Available focused on a programme within a regular education system. Labour market flexibility and new requirements on employees create a new domain of education called non-formal education. Is there a reliable statistical source with a good methodological definition for the Czech Republic? Labour Force Survey (LFS has been the basic statistical source for time comparison of non-formal education for the last ten years. Furthermore, a special Adult Education Survey (AES in 2011 was focused on individual components of non-formal education in a detailed way. In general, the goal of the EU is to use data from both internationally comparable surveys for analyses of the particular fields of lifelong learning in the way, that annual LFS data could be enlarged by detailed information from AES in five years periods. This article describes reliability of statistical data aboutnon-formal education. This analysis is usually connected with sampling and non-sampling errors.
El Salvador - Non-Formal Skills Development
Millennium Challenge Corporation — The Non-Formal Skills Development Sub-Activity had a budget of $5 million (USD) to provide short-term training to vulnerable populations in El Salvador's Northern...
Film for Non-Formal Education.
Jenkins, Janet
1979-01-01
Looks at educational factors in using television or cinema film for non-formal education in developing nations. Styles of presentation in films are discussed, and suggestions are made for assessing effectiveness. (JEG)
Connecting Formal and Informal Learning Experiences
O'Mahony, Timothy Kieran
The learning study reports on part of a larger project being lead by the author. In this dissertation I explore one goal of this project---to understand effects on student learning outcomes as a function of using different methods for connecting out-of-school experiential learning with formal school-based instruction. There is a long history of assuming that "experience is the best teacher"(e.g. Aristotle, 360 BC; Dewey, 1934; Kolb, 1997; Pliny, AD 77). As a practical geographer I endorsed that assumption throughout my teaching career, paying attention to local topography, physical features, and natural resources in the geographic hinterland. I was particularly interested in understanding the impact of the physical landscape on humankind, and reciprocally, noting humankind's widespread impressions on the natural world. Until I began this research project, I assumed that everyone else paid a similar attention to immediate surroundings. The work that I describe in this dissertation emerges out of a conviction that there are many degrees of truth to the idea that experience is a great teacher. Its effectiveness seems to depend on how one's "experience" is mediated, and how "learning from it" is defined. This motivated me to think about design principles for linking people's experiences to learning. I began to explore, experimentally, how I might enhance people's abilities to notice, represent, and discuss their experiences in order to better learn from them. This study investigated how different ways of connecting outdoor learning experiences to formal schooling impacts students' performance. I studied high-school students in outdoor settings as they engaged in evocative issues of learning pertaining to consequential everyday life encounters. Different kinds of "expert mediation" were introduced and tested as the students engaged in investigative activities around the science of dam removal and habitat restoration. I measured outcomes with the aid of pre- and
Some formal problems in gauge theories
International Nuclear Information System (INIS)
Magpantay, J.A.
1980-01-01
The concerns of this thesis are the problems due to the extra degrees of freedom in gauge-invariant theories. Since gauge-invariant Lagrangians are singular, Dirac's consistency formalism and Fadeev's extension are first reviewed. A clarification on the origin of primary constraints is given, and some of the open problems in singular Lagrangian theory are discussed. The criteria in choosing a gauge, i.e., attainability, maintainability and Poincare invariance are summarized and applied to various linear gauges. The effects of incomplete removal of all gauge freedom on the criteria for gauge conditions are described. A simple example in point mechanics that contains some of the features of gauge field theories is given. Finally, we describe a method of constructing gauge-invariant variables in various gauge field theories. For the Abelian theory, the gauge-invariant, transverse potential and Dirac's gauge-invariant fermion field was derived. For the non-Abelian case we introduce a local set of basis vectors and gauge transformations are interpreted as rotations of the basis vectors introduced. The analysis leads to the reformulation of local SU(2) field theory in terms of path-dependent U(1) x U(1) x U(1). However, the analysis fails to include the matter fields as of now
Application of Bondarenko formalism to fusion reactors
International Nuclear Information System (INIS)
Soran, P.D.; Dudziak, D.J.
1975-01-01
The Bondarenko formalism used to account for resonance self-shielding effects (temperature and composition) in a Reference Theta-Pinch Reactor is reviewed. A material of interest in the RTPR blanket is 93 Nb, which exhibits a large number of capture resonance in the energy region below 800 keV. Although Nb constitutes a small volume fraction of the blanket, its presence significantly affects the nucleonic properties of the RTPR blanket. The effects of self-shielding in 93 Nb on blanket parameters such as breeding ratio, total afterheat, radioactivity, magnet-coil heating and total energy depositions have been studied. Resonance self-shielding of 93 Nb, as compared to unshielded cross sections, will increase tritium breeding by approximately 7 percent in the RTPR blanket and will decrease blanket radioactivity, total recoverable energy, and magnet-coil heating. Temperature effects change these parameters by less than 2 percent. The method is not restricted to the RTPR, as a single set of Bondarenko f-factors is suitable for application to a variety of fusion reactor designs
Starobinsky cosmological model in Palatini formalism
Energy Technology Data Exchange (ETDEWEB)
Stachowski, Aleksander [Jagiellonian University, Astronomical Observatory, Krakow (Poland); Szydlowski, Marek [Jagiellonian University, Astronomical Observatory, Krakow (Poland); Jagiellonian University, Mark Kac Complex Systems Research Centre, Krakow (Poland); Borowiec, Andrzej [Wroclaw University, Institute for Theoretical Physics, Wroclaw (Poland)
2017-06-15
We classify singularities in FRW cosmologies, which dynamics can be reduced to the dynamical system of the Newtonian type. This classification is performed in terms of the geometry of a potential function if it has poles. At the sewn singularity, which is of a finite scale factor type, the singularity in the past meets the singularity in the future. We show that such singularities appear in the Starobinsky model in f(R) = R + γR{sup 2} in the Palatini formalism, when dynamics is determined by the corresponding piecewise-smooth dynamical system. As an effect we obtain a degenerate singularity. Analytical calculations are given for the cosmological model with matter and the cosmological constant. The dynamics of model is also studied using dynamical system methods. From the phase portraits we find generic evolutionary scenarios of the evolution of the universe. For this model, the best fit value of Ω{sub γ} = 3γH{sub 0}{sup 2} is equal 9.70 x 10{sup -11}. We consider a model in both Jordan and Einstein frames. We show that after transition to the Einstein frame we obtain both the form of the potential of the scalar field and the decaying Lambda term. (orig.)
Formal solutions of inverse scattering problems. III
International Nuclear Information System (INIS)
Prosser, R.T.
1980-01-01
The formal solutions of certain three-dimensional inverse scattering problems presented in papers I and II of this series [J. Math. Phys. 10, 1819 (1969); 17 1175 (1976)] are obtained here as fixed points of a certain nonlinear mapping acting on a suitable Banach space of integral kernels. When the scattering data are sufficiently restricted, this mapping is shown to be a contraction, thereby establishing the existence, uniqueness, and continuous dependence on the data of these formal solutions
Formalization of Many-Valued Logics
DEFF Research Database (Denmark)
Villadsen, Jørgen; Schlichtkrull, Anders
2017-01-01
Partiality is a key challenge for computational approaches to artificial intelligence in general and natural language in particular. Various extensions of classical two-valued logic to many-valued logics have been investigated in order to meet this challenge. We use the proof assistant Isabelle...... to formalize the syntax and semantics of many-valued logics with determinate as well as indeterminate truth values. The formalization allows for a concise presentation and makes automated verification possible....
Improved formalism for precision Higgs coupling fits
Barklow, Tim; Fujii, Keisuke; Jung, Sunghoon; Karl, Robert; List, Jenny; Ogawa, Tomohisa; Peskin, Michael E.; Tian, Junping
2018-03-01
Future e+e- colliders give the promise of model-independent determinations of the couplings of the Higgs boson. In this paper, we present an improved formalism for extracting Higgs boson couplings from e+e- data, based on the effective field theory description of corrections to the Standard Model. We apply this formalism to give projections of Higgs coupling accuracies for stages of the International Linear Collider and for other proposed e+e- colliders.
Improved formalism for precision Higgs coupling fits
International Nuclear Information System (INIS)
Barklow, Tim; Peskin, Michael E.; Jung, Sunghoon; Tian, Junping
2017-08-01
Future e + e - colliders give the promise of model-independent determinations of the couplings of the Higgs boson. In this paper, we present an improved formalism for extracting Higgs boson couplings from e + e - data, based on the Effective Field Theory description of corrections to the Standard Model. We apply this formalism to give projections of Higgs coupling accuracies for stages of the International Linear Collider and for other proposed e + e - colliders.
A computational formalization for partial evaluation
DEFF Research Database (Denmark)
Hatcliff, John; Danvy, Olivier
1996-01-01
We formalize a partial evaluator for Eugenio Moggi's computational metalanguage. This formalization gives an evaluation-order independent view of binding-time analysis and program specialization, including a proper treatment of call unfolding. It also enables us to express the essence of `control......-based binding-time improvements' for let expressions. Specically, we prove that the binding-time improvements given by `continuation-based specialization' can be expressed in the metalanguage via monadic laws....
Scientific and technical information output of the Langley Research Center for Calender year 1981
1982-01-01
Included are citations for formal reports, quick-release technical memorandums, contractor reports, journal articles and periodical literature, meeting/conference papers, and computer programs. Tech briefs, patents, and oral presentations to conferences/workshops are also included.
Scientific and technical information output of the Langley Research Center for calendar year 1982
1983-01-01
Citations are presented for 1380 for formal reports; quick-release technical memorandum; contractor reports; journal articles and periodical literature; technical talks and meeting presentations; computer programs; tech briefs, and patents produced during 1982. An author index is provided.
Directory of Open Access Journals (Sweden)
Kunio Ichinobe
2015-01-01
Full Text Available We study the \\(k\\-summability of divergent formal solutions for the Cauchy problem of certain linear partial differential operators with coefficients which are polynomial in \\(t\\. We employ the method of successive approximation in order to construct the formal solutions and to obtain the properties of analytic continuation of the solutions of convolution equations and their exponential growth estimates.
Formal Development of a Tool for Automated Modelling and Verification of Relay Interlocking Systems
DEFF Research Database (Denmark)
Haxthausen, Anne Elisabeth; Kjær, Andreas A.; Le Bliguet, Marie
2011-01-01
This paper describes a tool for formal modelling relay interlocking systems and explains how it has been stepwise, formally developed using the RAISE method. The developed tool takes the circuit diagrams of a relay interlocking system as input and gives as result a state transition system modelling...
Formality of the Chinese collective leadership.
Li, Haiying; Graesser, Arthur C
2016-09-01
We investigated the linguistic patterns in the discourse of four generations of the collective leadership of the Communist Party of China (CPC) from 1921 to 2012. The texts of Mao Zedong, Deng Xiaoping, Jiang Zemin, and Hu Jintao were analyzed using computational linguistic techniques (a Chinese formality score) to explore the persuasive linguistic features of the leaders in the contexts of power phase, the nation's education level, power duration, and age. The study was guided by the elaboration likelihood model of persuasion, which includes a central route (represented by formal discourse) versus a peripheral route (represented by informal discourse) to persuasion. The results revealed that these leaders adopted the formal, central route more when they were in power than before they came into power. The nation's education level was a significant factor in the leaders' adoption of the persuasion strategy. The leaders' formality also decreased with their increasing age and in-power times. However, the predictability of these factors for formality had subtle differences among the different types of leaders. These results enhance our understanding of the Chinese collective leadership and the role of formality in politically persuasive messages.
Formal Ontologies and Uncertainty. In Geographical Knowledge
Directory of Open Access Journals (Sweden)
Matteo Caglioni
2014-05-01
Full Text Available Formal ontologies have proved to be a very useful tool to manage interoperability among data, systems and knowledge. In this paper we will show how formal ontologies can evolve from a crisp, deterministic framework (ontologies of hard knowledge to new probabilistic, fuzzy or possibilistic frameworks (ontologies of soft knowledge. This can considerably enlarge the application potential of formal ontologies in geographic analysis and planning, where soft knowledge is intrinsically linked to the complexity of the phenomena under study. The paper briefly presents these new uncertainty-based formal ontologies. It then highlights how ontologies are formal tools to define both concepts and relations among concepts. An example from the domain of urban geography finally shows how the cause-to-effect relation between household preferences and urban sprawl can be encoded within a crisp, a probabilistic and a possibilistic ontology, respectively. The ontology formalism will also determine the kind of reasoning that can be developed from available knowledge. Uncertain ontologies can be seen as the preliminary phase of more complex uncertainty-based models. The advantages of moving to uncertainty-based models is evident: whether it is in the analysis of geographic space or in decision support for planning, reasoning on geographic space is almost always reasoning with uncertain knowledge of geographic phenomena.
Conceptual graph grammar--a simple formalism for sublanguage.
Johnson, S B
1998-11-01
There are a wide variety of computer applications that deal with various aspects of medical language: concept representation, controlled vocabulary, natural language processing, and information retrieval. While technical and theoretical methods appear to differ, all approaches investigate different aspects of the same phenomenon: medical sublanguage. This paper surveys the properties of medical sublanguage from a formal perspective, based on detailed analyses cited in the literature. A review of several computer systems based on sublanguage approaches shows some of the difficulties in addressing the interaction between the syntactic and semantic aspects of sublanguage. A formalism called Conceptual Graph Grammar is presented that attempts to combine both syntax and semantics into a single notation by extending standard Conceptual Graph notation. Examples from the domain of pathology diagnoses are provided to illustrate the use of this formalism in medical language analysis. The strengths and weaknesses of the approach are then considered. Conceptual Graph Grammar is an attempt to synthesize the common properties of different approaches to sublanguage into a single formalism, and to begin to define a common foundation for language-related research in medical informatics.
Changes in formal sex education: 1995-2002.
Lindberg, Laura Duberstein; Santelli, John S; Singh, Susheela
2006-12-01
Although comprehensive sex education is broadly supported by health professionals, funding for abstinence-only education has increased. Using data from the 1995 National Survey of Adolescent Males, the 1995 National Survey of Family Growth (NSFG) and the 2002 NSFG, changes in male and female adolescents' reports of the sex education they have received from formal sources were examined. Life-table methods were used to measure the timing of instruction, and t tests were used for changes over time. From 1995 to 2002, reports of formal instruction about birth control methods declined among both genders (males, from 81% to 66%; females, from 87% to 70%). This, combined with increases in reports of abstinence education among males (from 74% to 83%), resulted in a lower proportion of teenagers' overall receiving formal instruction about both abstinence and birth control methods (males, 65% to 59%; females, 84% to 65%), and a higher proportion of teenagers' receiving instruction only about abstinence (males, 9% to 24%; females, 8% to 21%). Teenagers in 2002 had received abstinence education about two years earlier (median age, 11.4 for males, 11.8 for females) than they had received birth control instruction (median age, 13.5 for both males and females). Among sexually experienced adolescents, 62% of females and 54% of males had received instruction about birth control methods prior to first sex. A substantial retreat from formal instruction about birth control methods has left increasing proportions of adolescents receiving only abstinence education. Efforts are needed to expand teenagers' access to medically accurate and comprehensive reproductive health information.
Formal modeling of a system of chemical reactions under uncertainty.
Ghosh, Krishnendu; Schlipf, John
2014-10-01
We describe a novel formalism representing a system of chemical reactions, with imprecise rates of reactions and concentrations of chemicals, and describe a model reduction method, pruning, based on the chemical properties. We present two algorithms, midpoint approximation and interval approximation, for construction of efficient model abstractions with uncertainty in data. We evaluate computational feasibility by posing queries in computation tree logic (CTL) on a prototype of extracellular-signal-regulated kinase (ERK) pathway.
Enhancing Formal Modelling Tool Support with Increased Automation
DEFF Research Database (Denmark)
Lausdahl, Kenneth
Progress report for the qualification exam report for PhD Student Kenneth Lausdahl. Initial work on enhancing tool support for the formal method VDM and the concept of unifying a abstract syntax tree with the ability for isolated extensions is described. The tool support includes a connection to ...... to UML and a test automation principle based on traces written as a kind of regular expressions....
Formalizing the Process of Constructing Chains of Lexical Units
Directory of Open Access Journals (Sweden)
Grigorij Chetverikov
2015-06-01
Full Text Available Formalizing the Process of Constructing Chains of Lexical Units The paper investigates mathematical aspects of describing the construction of chains of lexical units on the basis of finite-predicate algebra. Analyzing the construction peculiarities is carried out and application of the method of finding the power of linear logical transformation for removing characteristic words of a dictionary entry is given. Analysis and perspectives of the results of the study are provided.
Fourier Series Formalization in ACL2(r
Directory of Open Access Journals (Sweden)
Cuong K. Chau
2015-09-01
Full Text Available We formalize some basic properties of Fourier series in the logic of ACL2(r, which is a variant of ACL2 that supports reasoning about the real and complex numbers by way of non-standard analysis. More specifically, we extend a framework for formally evaluating definite integrals of real-valued, continuous functions using the Second Fundamental Theorem of Calculus. Our extended framework is also applied to functions containing free arguments. Using this framework, we are able to prove the orthogonality relationships between trigonometric functions, which are the essential properties in Fourier series analysis. The sum rule for definite integrals of indexed sums is also formalized by applying the extended framework along with the First Fundamental Theorem of Calculus and the sum rule for differentiation. The Fourier coefficient formulas of periodic functions are then formalized from the orthogonality relations and the sum rule for integration. Consequently, the uniqueness of Fourier sums is a straightforward corollary. We also present our formalization of the sum rule for definite integrals of infinite series in ACL2(r. Part of this task is to prove the Dini Uniform Convergence Theorem and the continuity of a limit function under certain conditions. A key technique in our proofs of these theorems is to apply the overspill principle from non-standard analysis.
RTL2RTL Formal Equivalence: Boosting the Design Confidence
Directory of Open Access Journals (Sweden)
M V Achutha Kiran Kumar
2014-07-01
Full Text Available Increasing design complexity driven by feature and performance requirements and the Time to Market (TTM constraints force a faster design and validation closure. This in turn enforces novel ways of identifying and debugging behavioral inconsistencies early in the design cycle. Addition of incremental features and timing fixes may alter the legacy design behavior and would inadvertently result in undesirable bugs. The most common method of verifying the correctness of the changed design is to run a dynamic regression test suite before and after the intended changes and compare the results, a method which is not exhaustive. Modern Formal Verification (FV techniques involving new methods of proving Sequential Hardware Equivalence enabled a new set of solutions for the given problem, with complete coverage guarantee. Formal Equivalence can be applied for proving functional integrity after design changes resulting from a wide variety of reasons, ranging from simple pipeline optimizations to complex logic redistributions. We present here our experience of successfully applying the RTL to RTL (RTL2RTL Formal Verification across a wide spectrum of problems on a Graphics design. The RTL2RTL FV enabled checking the design sanity in a very short time, thus enabling faster and safer design churn. The techniques presented in this paper are applicable to any complex hardware design.
Memory sparing, fast scattering formalism for rigorous diffraction modeling
Iff, W.; Kämpfe, T.; Jourlin, Y.; Tishchenko, A. V.
2017-07-01
The basics and algorithmic steps of a novel scattering formalism suited for memory sparing and fast electromagnetic calculations are presented. The formalism, called ‘S-vector algorithm’ (by analogy with the known scattering-matrix algorithm), allows the calculation of the collective scattering spectra of individual layered micro-structured scattering objects. A rigorous method of linear complexity is applied to model the scattering at individual layers; here the generalized source method (GSM) resorting to Fourier harmonics as basis functions is used as one possible method of linear complexity. The concatenation of the individual scattering events can be achieved sequentially or in parallel, both having pros and cons. The present development will largely concentrate on a consecutive approach based on the multiple reflection series. The latter will be reformulated into an implicit formalism which will be associated with an iterative solver, resulting in improved convergence. The examples will first refer to 1D grating diffraction for the sake of simplicity and intelligibility, with a final 2D application example.
A formal model of interpersonal inference
Directory of Open Access Journals (Sweden)
Michael eMoutoussis
2014-03-01
Full Text Available Introduction: We propose that active Bayesian inference – a general framework for decision-making – can equally be applied to interpersonal exchanges. Social cognition, however, entails special challenges. We address these challenges through a novel formulation of a formal model and demonstrate its psychological significance. Method: We review relevant literature, especially with regards to interpersonal representations, formulate a mathematical model and present a simulation study. The model accommodates normative models from utility theory and places them within the broader setting of Bayesian inference. Crucially, we endow people's prior beliefs, into which utilities are absorbed, with preferences of self and others. The simulation illustrates the model's dynamics and furnishes elementary predictions of the theory. Results: 1. Because beliefs about self and others inform both the desirability and plausibility of outcomes, in this framework interpersonal representations become beliefs that have to be actively inferred. This inference, akin to 'mentalising' in the psychological literature, is based upon the outcomes of interpersonal exchanges. 2. We show how some well-known social-psychological phenomena (e.g. self-serving biases can be explained in terms of active interpersonal inference. 3. Mentalising naturally entails Bayesian updating of how people value social outcomes. Crucially this includes inference about one’s own qualities and preferences. Conclusion: We inaugurate a Bayes optimal framework for modelling intersubject variability in mentalising during interpersonal exchanges. Here, interpersonal representations are endowed with explicit functional and affective properties. We suggest the active inference framework lends itself to the study of psychiatric conditions where mentalising is distorted.
Formal Analysis of Graphical Security Models
DEFF Research Database (Denmark)
Aslanyan, Zaruhi
, software components and human actors interacting with each other to form so-called socio-technical systems. The importance of socio-technical systems to modern societies requires verifying their security properties formally, while their inherent complexity makes manual analyses impracticable. Graphical...... models for security offer an unrivalled opportunity to describe socio-technical systems, for they allow to represent different aspects like human behaviour, computation and physical phenomena in an abstract yet uniform manner. Moreover, these models can be assigned a formal semantics, thereby allowing...... formal verification of their properties. Finally, their appealing graphical notations enable to communicate security concerns in an understandable way also to non-experts, often in charge of the decision making. This dissertation argues that automated techniques can be developed on graphical security...
Formalizing Darwinism and inclusive fitness theory.
Grafen, Alan
2009-11-12
Inclusive fitness maximization is a basic building block for biological contributions to any theory of the evolution of society. There is a view in mathematical population genetics that nothing is caused to be maximized in the process of natural selection, but this is explained as arising from a misunderstanding about the meaning of fitness maximization. Current theoretical work on inclusive fitness is discussed, with emphasis on the author's 'formal Darwinism project'. Generally, favourable conclusions are drawn about the validity of assuming fitness maximization, but the need for continuing work is emphasized, along with the possibility that substantive exceptions may be uncovered. The formal Darwinism project aims more ambitiously to represent in a formal mathematical framework the central point of Darwin's Origin of Species, that the mechanical processes of inheritance and reproduction can give rise to the appearance of design, and it is a fitting ambition in Darwin's bicentenary year to capture his most profound discovery in the lingua franca of science.
First order formalism for quantum gravity
International Nuclear Information System (INIS)
Gleiser, M.; Holman, R.; Neto, N.P.
1987-05-01
We develop a first order formalism for the quantization of gravity. We take as canonical variables both the induced metric and the extrinsic curvature of the (d - 1) -dimensional hypersurfaces obtained by the foliation of the d - dimensional spacetime. After solving the constraint algebra we use the Dirac formalism to quantize the theory and obtain a new representation for the Wheeler-DeWitt equation, defined in the functional space of the extrinsic curvature. We also show how to obtain several different representations of the Wheeler-DeWitt equation by considering actions differing by a total divergence. In particular, the intrinsic and extrinsic time approaches appear in a natural way, as do equivalent representations obtained by functional Fourier transforms of appropriate variables. We conclude with some remarks about the construction of the Hilbert space within the first order formalism. 10 refs
Enhancing System Realisation in Formal Model Development
DEFF Research Database (Denmark)
Tran-Jørgensen, Peter Würtz Vinther
and requirements of software extensions targeting Overture. The tools developed in this PhD project have successfully supported three case studies from externally funded projects. The feedback received from the case study work has further helped improve the code generation infrastructure and the tools built using...... implementation. One way to realise the system’s software is by automatically generating it from the formal specification – a technique referred to as code generation. However, in general it is difficult to make guarantees about the correctness of the generated code – especially while requiring automation...... of the steps involved in realising the formal specification. This PhD dissertation investigates ways to improve the automation of the steps involved in realising and validating a system based on a formal specification. The approach aims to develop properly designed software tools which support the integration...
Towards Formal Verification of a Separation Microkernel
Butterfield, Andrew; Sanan, David; Hinchey, Mike
2013-08-01
The best approach to verifying an IMA separation kernel is to use a (fixed) time-space partitioning kernel with a multiple independent levels of separation (MILS) architecture. We describe an activity that explores the cost and feasibility of doing a formal verification of such a kernel to the Common Criteria (CC) levels mandated by the Separation Kernel Protection Profile (SKPP). We are developing a Reference Specification of such a kernel, and are using higher-order logic (HOL) to construct formal models of this specification and key separation properties. We then plan to do a dry run of part of a formal proof of those properties using the Isabelle/HOL theorem prover.
Automated Formal Verification for PLC Control Systems
Fernández Adiego, Borja
2014-01-01
Programmable Logic Controllers (PLCs) are widely used devices used in industrial control systems. Ensuring that the PLC software is compliant with its specification is a challenging task. Formal verification has become a recommended practice to ensure the correctness of the safety-critical software. However, these techniques are still not widely applied in industry due to the complexity of building formal models, which represent the system and the formalization of requirement specifications. We propose a general methodology to perform automated model checking of complex properties expressed in temporal logics (e.g. CTL, LTL) on PLC programs. This methodology is based on an Intermediate Model (IM), meant to transform PLC programs written in any of the languages described in the IEC 61131-3 standard (ST, IL, etc.) to different modeling languages of verification tools. This approach has been applied to CERN PLC programs validating the methodology.
User Interface Technology for Formal Specification Development
Lowry, Michael; Philpot, Andrew; Pressburger, Thomas; Underwood, Ian; Lum, Henry, Jr. (Technical Monitor)
1994-01-01
Formal specification development and modification are an essential component of the knowledge-based software life cycle. User interface technology is needed to empower end-users to create their own formal specifications. This paper describes the advanced user interface for AMPHION1 a knowledge-based software engineering system that targets scientific subroutine libraries. AMPHION is a generic, domain-independent architecture that is specialized to an application domain through a declarative domain theory. Formal specification development and reuse is made accessible to end-users through an intuitive graphical interface that provides semantic guidance in creating diagrams denoting formal specifications in an application domain. The diagrams also serve to document the specifications. Automatic deductive program synthesis ensures that end-user specifications are correctly implemented. The tables that drive AMPHION's user interface are automatically compiled from a domain theory; portions of the interface can be customized by the end-user. The user interface facilitates formal specification development by hiding syntactic details, such as logical notation. It also turns some of the barriers for end-user specification development associated with strongly typed formal languages into active sources of guidance, without restricting advanced users. The interface is especially suited for specification modification. AMPHION has been applied to the domain of solar system kinematics through the development of a declarative domain theory. Testing over six months with planetary scientists indicates that AMPHION's interactive specification acquisition paradigm enables users to develop, modify, and reuse specifications at least an order of magnitude more rapidly than manual program development.
Infinitesimal deformations of a formal symplectic groupoid
Karabegov, Alexander
2010-01-01
Given a formal symplectic groupoid $G$ over a Poisson manifold $(M, \\pi_0)$, we define a new object, an infinitesimal deformation of $G$, which can be thought of as a formal symplectic groupoid over the manifold $M$ equipped with an infinitesimal deformation $\\pi_0 + \\epsilon \\pi_1$ of the Poisson bivector field $\\pi_0$. The source and target mappings of a deformation of $G$ are deformations of the source and target mappings of $G$. To any pair of natural star products $(\\ast, \\tilde\\ast)$ ha...
Formal Institutions and Subjective Well-Being
DEFF Research Database (Denmark)
Bjørnskov, Christian; Dreher, Axel; Fischer, Justina
A long tradition in economics explores the association between the quality of formal institutions and economic performance. The literature on the relationship between such institutions and happiness is, however, rather limited. In this paper, we revisit the findings from recent cross-country stud......A long tradition in economics explores the association between the quality of formal institutions and economic performance. The literature on the relationship between such institutions and happiness is, however, rather limited. In this paper, we revisit the findings from recent cross...
Improved formalism for precision Higgs coupling fits
Energy Technology Data Exchange (ETDEWEB)
Barklow, Tim; Peskin, Michael E. [Stanford Univ., Menlo Park, CA (United States). Stanford Linear Accelerator Center; Fujii, Keisuke; Ogawa, Tomohisa [High Energy Accelerator Research Organization (KEK), Tsukuba, Ibaraki (Japan); Jung, Sunghoon [Stanford Univ., Menlo Park, CA (United States). Stanford Linear Accelerator Center; Seoul National Univ. (Korea, Republic of). Dept. of Physics and Astronomy; Karl, Robert; List, Jenny [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Tian, Junping [Tokyo Univ. (Japan). International Center for Elementary Particle Physics (ICEPP)
2017-08-15
Future e{sup +}e{sup -} colliders give the promise of model-independent determinations of the couplings of the Higgs boson. In this paper, we present an improved formalism for extracting Higgs boson couplings from e{sup +}e{sup -} data, based on the Effective Field Theory description of corrections to the Standard Model. We apply this formalism to give projections of Higgs coupling accuracies for stages of the International Linear Collider and for other proposed e{sup +}e{sup -} colliders.
A Mathematical Account of the NEGF Formalism
DEFF Research Database (Denmark)
Cornean, Decebal Horia; Moldoveanu, Valeriu; Pillet, Claude-Alain
2018-01-01
The main goal of this paper is to put on solid mathematical grounds the so-called non-equilibrium Green’s function transport formalism for open systems. In particular, we derive the Jauho–Meir–Wingreen formula for the time-dependent current through an interacting sample coupled to non-interacting......The main goal of this paper is to put on solid mathematical grounds the so-called non-equilibrium Green’s function transport formalism for open systems. In particular, we derive the Jauho–Meir–Wingreen formula for the time-dependent current through an interacting sample coupled to non...
Towards formalization of inspection using petrinets
International Nuclear Information System (INIS)
Javed, M.; Naeem, M.; Bahadur, F.; Wahab, A.
2014-01-01
Achieving better quality software has always been a challenge for software developers. Inspection is one of the most efficient techniques, which ensure the quality of software during its development. To the best of our knowledge, current inspection techniques are not realized by any formal approach. In this paper, we propose an inspection technique, which is not only backed by the formal mathematical semantics of Petri nets, but also supports inspecting concurrent processes. We also use a case study of an agent based distributed processing system to demonstrate the inspection of concurrent processes. (author)
Tignanelli, H.
Se comentan en esta comunicación, las principales contribuciones realizadas en el campo de la educación en astronomía en los niveles primario, secundario y terciario, como punto de partida para la discusión de la actual inserción de los contenidos astronómicos en los nuevos contenidos curriculares de la EGB - Educación General Básica- y Polimodal, de la Reforma Educativa. En particular, se discuten los alcances de la educación formal y no formal, su importancia para la capacitación de profesores y maestros, y perspectivas a futuro.
Gutiérrez-Santiuste, Elba; Gámiz-Sánchez, Vanesa-M.; Gutiérrez-Pérez, Jose
2015-01-01
The study presents a comparative analysis of two virtual learning formats: one non-formal through a Massive Open Online Course (MOOC) and the other formal through b-learning. We compare the communication barriers and the satisfaction perceived by the students (N = 249) by developing a qualitative analysis using semi-structured questionnaires and…
Augmenting Reality and Formality of Informal and Non-Formal Settings to Enhance Blended Learning
Pérez-Sanagustin, Mar; Hernández-Leo, Davinia; Santos, Patricia; Kloos, Carlos Delgado; Blat, Josep
2014-01-01
Visits to museums and city tours have been part of higher and secondary education curriculum activities for many years. However these activities are typically considered "less formal" when compared to those carried out in the classroom, mainly because they take place in informal or non-formal settings. Augmented Reality (AR) technologies…
Cameron, Roslyn; Harrison, Jennifer L.
2012-01-01
Definitions, differences and relationships between formal, non-formal and informal learning have long been contentious. There has been a significant change in language and reference from adult education to what amounts to forms of learning categorised by their modes of facilitation. Nonetheless, there is currently a renewed interest in the…
Radovic, Slaviša; Passey, Don
2016-01-01
The aim of this paper is to explore further an under-developed area--how drivers of curriculum, pedagogy and assessment conceptions and practices shape the creation and uses of technologically based resources to support mathematics learning across informal, non-formal and formal learning environments. The paper considers: the importance of…
Combining Formal, Non-Formal and Informal Learning for Workforce Skill Development
Misko, Josie
2008-01-01
This literature review, undertaken for Australian Industry Group, shows how multiple variations and combinations of formal, informal and non-formal learning, accompanied by various government incentives and organisational initiatives (including job redesign, cross-skilling, multi-skilling, diversified career pathways, action learning projects,…
Lending Policies of Informal, Formal, and Semi-formal Lenders: Evidence from Vietnam
Lensink, B.W.; Pham, T.T.T.
2007-01-01
This paper compares lending policies of formal, informal and semiformal lenders with respect to household lending in Vietnam. The analysis suggests that the probability of using formal or semiformal credit increases if borrowers provide collateral, a guarantor and/or borrow for business-related
Scientific and Technical Information Output of the Langley Research Center, for calendar year 1976
1976-01-01
Documents listed include NASA Technical Reports, Technical Notes, Technical Memorandums, Special Publications, Contractor Reports, journal articles, and technical presentations made at Society meetings. NASA formal reports listed are those that were mailed and distributed to the ultimate user. The material presented here is listed first by Division and then under the following headings: (a) Formal Reports, (b) Contractor Reports, (c) Articles and Meeting Presentations, and (d) High Number Technical Memorandums (High TMX's). Under each heading, the material cited authors in alphabetical order. If a report has more than one author and these authors are from different Divisions, the report is listed only once, under the senior author's name.
Formal verification of complex properties on PLC programs
Darvas, D; Voros, A; Bartha, T; Blanco Vinuela, E; Gonzalez Suarez, V M
2014-01-01
Formal verification has become a recommended practice in the safety-critical application areas. However, due to the complexity of practical control and safety systems, the state space explosion often prevents the use of formal analysis. In this paper we extend our former verification methodology with effective property preserving reduction techniques. For this purpose we developed general rule-based reductions and a customized version of the Cone of Influence (COI) reduction. Using these methods, the verification of complex requirements formalised with temporal logics (e.g. CTL, LTL) can be orders of magnitude faster. We use the NuSMV model checker on a real-life PLC program from CERN to demonstrate the performance of our reduction techniques.
Hamiltonian formalisms and symmetries of the Pais–Uhlenbeck oscillator
Directory of Open Access Journals (Sweden)
Krzysztof Andrzejewski
2014-12-01
Full Text Available The study of the symmetry of Pais–Uhlenbeck oscillator initiated in Andrzejewski et al. (2014 [24] is continued with special emphasis put on the Hamiltonian formalism. The symmetry generators within the original Pais and Uhlenbeck Hamiltonian approach as well as the canonical transformation to the Ostrogradski Hamiltonian framework are derived. The resulting algebra of generators appears to be the central extension of the one obtained on the Lagrangian level; in particular, in the case of odd frequencies one obtains the centrally extended l-conformal Newton–Hooke algebra. In this important case the canonical transformation to an alternative Hamiltonian formalism (related to the free higher derivatives theory is constructed. It is shown that all generators can be expressed in terms of the ones for the free theory and the result agrees with that obtained by the orbit method.
The Formalization of the Business Process Modeling Goals
Directory of Open Access Journals (Sweden)
Ligita Bušinska
2016-10-01
Full Text Available In business process modeling the de facto standard BPMN has emerged. However, the applications of this notation have many subsets of elements and various extensions. Also, BPMN still coincides with many other modeling languages, forming a large set of available options for business process modeling languages and dialects. While, in general, the goal of modelers is a central notion in the choice of modeling languages and notations, in most researches that propose guidelines, techniques, and methods for business process modeling language evaluation and/or selection, the business process modeling goal is not formalized and not transparently taken into account. To overcome this gap, and to explicate and help to handle business process modeling complexity, the approach to formalize the business process modeling goal, and the supporting three dimensional business process modeling framework, are proposed.
On a theorem of Faltings on formal functions
Directory of Open Access Journals (Sweden)
Paola Bonacini
2007-12-01
Full Text Available In 1980, Faltings proved, by deep local algebra methods, a local resultregarding formal functions which has the following global geometric factas a consequence. Theorem. − Let k be an algebraically closed field (ofany characteristic. Let Y be a closed subvariety of a projective irreduciblevariety X defined over k. Assume that X ⊂ P^n , dim(X = d > 2 and Yis the intersection of X with r hyperplanes of P^n , with r ≤ d − 1. Then,every formal rational function on X along Y can be (uniquely extended toa rational function on X . Due to its importance, the aim of this paper is toprovide two elementary global geometric proofs of this theorem.
Why formal learning theory matters for cognitive science.
Fulop, Sean; Chater, Nick
2013-01-01
This article reviews a number of different areas in the foundations of formal learning theory. After outlining the general framework for formal models of learning, the Bayesian approach to learning is summarized. This leads to a discussion of Solomonoff's Universal Prior Distribution for Bayesian learning. Gold's model of identification in the limit is also outlined. We next discuss a number of aspects of learning theory raised in contributed papers, related to both computational and representational complexity. The article concludes with a description of how semi-supervised learning can be applied to the study of cognitive learning models. Throughout this overview, the specific points raised by our contributing authors are connected to the models and methods under review. Copyright © 2013 Cognitive Science Society, Inc.
Ambur, Manjula Y.; Yagle, Jeremy J.; Reith, William; McLarney, Edward
2016-01-01
In 2014, a team of researchers, engineers and information technology specialists at NASA Langley Research Center developed a Big Data Analytics and Machine Intelligence Strategy and Roadmap as part of Langley's Comprehensive Digital Transformation Initiative, with the goal of identifying the goals, objectives, initiatives, and recommendations need to develop near-, mid- and long-term capabilities for data analytics and machine intelligence in aerospace domains. Since that time, significant progress has been made in developing pilots and projects in several research, engineering, and scientific domains by following the original strategy of collaboration between mission support organizations, mission organizations, and external partners from universities and industry. This report summarizes the work to date in Data Intensive Scientific Discovery, Deep Content Analytics, and Deep Q&A projects, as well as the progress made in collaboration, outreach, and education. Recommendations for continuing this success into future phases of the initiative are also made.
Formal Specification and Run-time Monitoring Within the Ballistic Missile Defense Project
National Research Council Canada - National Science Library
Caffall, Dale S; Cook, Thomas; Drusinsky, Doron; Michael, James B; Shing, Man-Tak; Sklavounos, Nicholas
2005-01-01
.... Ballistic Missile Defense Advanced Battle Manager (ABM) project in an effort that is amongst the most comprehensive application of formal methods to a large-scale safety-critical software application ever reported...
A formal safety analysis for PLC software-based safety critical system using Z
International Nuclear Information System (INIS)
Koh, Jung Soo; Seong, Poong Hyun
1997-01-01
This paper describes a formal safety analysis technique which is demonstrated by performing empirical formal safety analysis with the case study of beamline hutch door Interlock system that is developed by using PLC (Programmable Logic Controller) systems at the Pohang Accelerator Laboratory. In order to perform formed safety analysis, we have built the Z formal specifications representation from user requirement written in ambiguous natural language and target PLC ladder logic, respectively. We have also studied the effective method to express typical PLC timer component by using specific Z formal notation which is supported by temporal history. We present a formal proof technique specifying and verifying that the hazardous states are not introduced into ladder logic in the PLC-based safety critical system
Design of an Indoor Sonic Boom Simulator at NASA Langley Research Center
Klos, Jacob; Sullivan, Brenda M.; Shepherd, Kevin P.
2008-01-01
Construction of a simulator to recreate the soundscape inside residential buildings exposed to sonic booms is scheduled to start during the summer of 2008 at NASA Langley Research Center. The new facility should be complete by the end of the year. The design of the simulator allows independent control of several factors that create the indoor soundscape. Variables that will be isolated include such factors as boom duration, overpressure, rise time, spectral shape, level of rattle, level of squeak, source of rattle and squeak, level of vibration and source of vibration. Test subjects inside the simulator will be asked to judge the simulated soundscape, which will represent realistic indoor boom exposure. Ultimately, this simulator will be used to develop a functional relationship between human response and the sound characteristics creating the indoor soundscape. A conceptual design has been developed by NASA personnel, and is currently being vetted through small-scale risk reduction tests that are being performed in-house. The purpose of this document is to introduce the conceptual design, identify how the indoor response will be simulated, briefly outline some of the risk reduction tests that have been completed to vet the design, and discuss the impact of these tests on the simulator design.
Open Architecture Data System for NASA Langley Combined Loads Test System
Lightfoot, Michael C.; Ambur, Damodar R.
1998-01-01
The Combined Loads Test System (COLTS) is a new structures test complex that is being developed at NASA Langley Research Center (LaRC) to test large curved panels and cylindrical shell structures. These structural components are representative of aircraft fuselage sections of subsonic and supersonic transport aircraft and cryogenic tank structures of reusable launch vehicles. Test structures are subjected to combined loading conditions that simulate realistic flight load conditions. The facility consists of two pressure-box test machines and one combined loads test machine. Each test machine possesses a unique set of requirements or research data acquisition and real-time data display. Given the complex nature of the mechanical and thermal loads to be applied to the various research test articles, each data system has been designed with connectivity attributes that support both data acquisition and data management functions. This paper addresses the research driven data acquisition requirements for each test machine and demonstrates how an open architecture data system design not only meets those needs but provides robust data sharing between data systems including the various control systems which apply spectra of mechanical and thermal loading profiles.
Automatic control of NASA Langley's 0.3-meter cryogenic test facility
Thibodeaux, J. J.; Balakrishna, S.
1980-01-01
Experience during the past 6 years of operation of the 0.3-meter transonic cryogenic tunnel at the NASA Langley Research Center has shown that there are problems associated with efficient operation and control of cryogenic tunnels using manual control schemes. This is due to the high degree of process crosscoupling between the independent control variables (temperature, pressure, and fan drive speed) and the desired test condition (Mach number and Reynolds number). One problem has been the inability to maintain long-term accurate control of the test parameters. Additionally, the time required to change from one test condition to another has proven to be excessively long and much less efficient than desirable in terms of liquid nitrogen and electrical power usage. For these reasons, studies have been undertaken to: (1) develop and validate a mathematical model of the 0.3-meter cryogenic tunnel process, (2) utilize this model in a hybrid computer simulation to design temperature and pressure feedback control laws, and (3) evaluate the adequacy of these control schemes by analysis of closed-loop experimental data. This paper will present the results of these studies.
Preliminary Design of a Solar Photovoltaic Array for Net-Zero Energy Buildings at NASA Langley
Cole, Stuart K.; DeYoung, Russell J.
2012-01-01
An investigation was conducted to evaluate photovoltaic (solar electric systems) systems for a single building at NASA Langley as a representative case for alternative sustainable power generation. Building 1250 in the Science Directorate is comprised of office and laboratory space, and currently uses approximately 250,000 kW/month of electrical power with a projected use of 200,000 kW/month with additional conservation measures. The installation would be applied towards a goal for having Building 1250 classified as a net-zero energy building as it would produce as much energy as it uses over the course of a year. Based on the facility s electrical demand, a photovoltaic system and associated hardware were characterized to determine the optimal system, and understand the possible impacts from its deployment. The findings of this investigation reveal that the 1.9 MW photovoltaic electrical system provides favorable and robust results. The solar electric system should supply the needed sustainable power solution especially if operation and maintenance of the system will be considered a significant component of the system deployment.
Allen, B. Danette; Cross, Charles D.; Motter, Mark A.; Neilan, James H.; Qualls, Garry D.; Rothhaar, Paul M.; Tran, Loc; Trujillo, Anna C.; Crisp, Vicki K.
2015-01-01
NASA aeronautics research has made decades of contributions to aviation. Both aircraft and air traffic management (ATM) systems in use today contain NASA-developed and NASA sponsored technologies that improve safety and efficiency. Recent innovations in robotics and autonomy for automobiles and unmanned systems point to a future with increased personal mobility and access to transportation, including aviation. Automation and autonomous operations will transform the way we move people and goods. Achieving this mobility will require safe, robust, reliable operations for both the vehicle and the airspace and challenges to this inevitable future are being addressed now in government labs, universities, and industry. These challenges are the focus of NASA Langley Research Center's Autonomy Incubator whose R&D portfolio includes mission planning, trajectory and path planning, object detection and avoidance, object classification, sensor fusion, controls, machine learning, computer vision, human-machine teaming, geo-containment, open architecture design and development, as well as the test and evaluation environment that will be critical to prove system reliability and support certification. Safe autonomous operations will be enabled via onboard sensing and perception systems in both data-rich and data-deprived environments. Applied autonomy will enable safety, efficiency and unprecedented mobility as people and goods take to the skies tomorrow just as we do on the road today.
NASA Langley and NLR Research of Distributed Air/Ground Traffic Management
Ballin, Mark G.; Hoekstra, Jacco M.; Wing, David J.; Lohr, Gary W.
2002-01-01
Distributed Air/Ground Traffic Management (DAG-TM) is a concept of future air traffic operations that proposes to distribute information, decision-making authority, and responsibility among flight crews, the air traffic service provider, and aeronautical operational control organizations. This paper provides an overview and status of DAG-TM research at NASA Langley Research Center and the National Aerospace Laboratory of The Netherlands. Specific objectives of the research are to evaluate the technical and operational feasibility of the autonomous airborne component of DAG-TM, which is founded on the operational paradigm of free flight. The paper includes an overview of research approaches, the airborne technologies under development, and a summary of experimental investigations and findings to date. Although research is not yet complete, these findings indicate that free flight is feasible and will significantly enhance system capacity and safety. While free flight cannot alone resolve the complex issues faced by those modernizing the global airspace, it should be considered an essential part of a comprehensive air traffic management modernization activity.
Coon, Craig R.; Cardullo, Frank M.; Zaychik, Kirill B.
2014-01-01
The ability to develop highly advanced simulators is a critical need that has the ability to significantly impact the aerospace industry. The aerospace industry is advancing at an ever increasing pace and flight simulators must match this development with ever increasing urgency. In order to address both current problems and potential advancements with flight simulator techniques, several aspects of current control law technology of the National Aeronautics and Space Administration (NASA) Langley Research Center's Cockpit Motion Facility (CMF) motion base simulator were examined. Preliminary investigation of linear models based upon hardware data were examined to ensure that the most accurate models are used. This research identified both system improvements in the bandwidth and more reliable linear models. Advancements in the compensator design were developed and verified through multiple techniques. The position error rate feedback, the acceleration feedback and the force feedback were all analyzed in the heave direction using the nonlinear model of the hardware. Improvements were made using the position error rate feedback technique. The acceleration feedback compensator also provided noteworthy improvement, while attempts at implementing a force feedback compensator proved unsuccessful.
NASA Langley Atmospheric Science Data Centers Near Real-Time Data Products
Davenport, T.; Parker, L.; Rinsland, P. L.
2014-12-01
Over the past decade the Atmospheric Science Data Center (ASDC) at NASA Langley Research Center has archived and distributed a variety of satellite mission data sets. NASA's goal in Earth science is to observe, understand, and model the Earth system to discover how it is changing, to better predict change, and to understand the consequences for life on Earth. The ASDC has collaborated with Science Teams to accommodate emerging science users in the climate and modeling communities. The ASDC has expanded its original role to support operational usage by related Earth Science satellites, support land and ocean assimilations, support of field campaigns, outreach programs, and application projects for agriculture and energy industries to bridge the gap between Earth science research results and the adoption of data and prediction capabilities for reliable and sustained use in Decision Support Systems (DSS). For example; these products are being used by the community performing data assimilations to regulate aerosol mass in global transport models to improve model response and forecast accuracy, to assess the performance of components of a global coupled atmospheric-ocean climate model, improve atmospheric motion vector (winds) impact on numerical weather prediction models, and to provide internet-based access to parameters specifically tailored to assist in the design of solar and wind powered renewable energy systems. These more focused applications often require Near Real-Time (NRT) products. Generating NRT products pose their own unique set challenges for the ASDC and the Science Teams. Examples of ASDC NRT products and challenges will be discussed.
Climate Change and Vector Borne Diseases on NASA Langley Research Center
Cole, Stuart K.; DeYoung, Russell J.; Shepanek, Marc A.; Kamel, Ahmed
2014-01-01
Increasing global temperature, weather patterns with above average storm intensities, and higher sea levels have been identified as phenomena associated with global climate change. As a causal system, climate change could contribute to vector borne diseases in humans. Vectors of concern originate from the vicinity of Langley Research Center include mosquitos and ticks that transmit disease that originate regionally, nationwide, or from outside the US. Recognizing changing conditions, vector borne diseases propagate under climate change conditions, and understanding the conditions in which they may exist or propagate, presents opportunities for monitoring their progress and mitigating their potential impacts through communication, continued monitoring, and adaptation. Personnel comprise a direct and fundamental support to NASA mission success, continuous and improved understanding of climatic conditions, and the resulting consequence of disease from these conditions, helps to reduce risk in terrestrial space technologies, ground operations, and space research. This research addresses conditions which are attributed to climatic conditions which promote environmental conditions conducive to the increase of disease vectors. This investigation includes evaluation of local mosquito population count and rainfall data for statistical correlation and identification of planning recommendations unique to LaRC, other NASA Centers to assess adaptation approaches, Center-level planning strategies.
Mantay, Wayne R.; Adelman, Howard M.
1990-01-01
This paper describes a joint NASA/Army research activity at the Langley Research Center to develop optimization procedures aimed at improving the rotor blade design process by integrating appropriate disciplines and accounting for important interactions among the disciplines. The activity is being guided by a Steering Committee made up of key NASA and Army researchers and managers. The paper describes the optimization formulation in terms of the objective function, design variables, and constraints. The analysis aspects are discussed, and the interdisciplinary interactions are defined in terms of the information that must be transferred among disciplinary analyses as well as the trade-offs between disciplines in determining the details of the design. At this writing, some significant progress has been made. Results given in the paper represent accomplishments in rotor aerodynamic performance optimization for minimum horsepower, rotor dynamic optimization for vibration reduction, approximate analysis of frequencies and mode shapes, rotor structural optimization for minimum weight, and integrated aerodynamic load/dynamics optimization for minimum vibration and weight.
Remote Measurement of Pollution-A 40-Year Langley Retrospective. Part 2; Aerosols and Clouds
Remsberg, Ellis E.
2012-01-01
A workshop was convened in 1971 by the National Aeronautics and Space Administration (NASA) on the Remote Measurement of Pollution (RMOP), and the findings and recommendations of its participants are in a NASA Special Publication (NASA SP-285). The three primary workshop panels and their chairmen were focused on trace gas species (Will Kellogg), atmospheric particulates or aerosols (Verner Suomi), and water pollution (Gifford Ewing). Many of the workshop participants were specialists in the techniques that might be employed for regional to global-scale, remote measurements of the atmospheric parameters from Earth-orbiting satellites. In 2011 the author published a 40-year retrospective (or Part I) of the instrumental developments that were an outgrowth of the RMOP panel headed by Will Kellogg, i.e., on atmospheric temperature and gaseous species. The current report (or Part II) is an analogous retrospective of the vision of the panel led by Verner Suomi for the measurement of particulates (or aerosols) and clouds and for their effects on Earth s radiation budget. The class of measurement techniques includes laser radar or lidar, solar occultation, limb emission and scattering, nadir-viewing photometry or radiometry, and aerosol polarimetry. In addition, the retrospective refers to the scientific imperatives that led to those instrument developments of 1971-2010. Contributions of the atmospheric technologists at the Langley Research Center are emphasized, and their progress is placed in the context of the parallel and complementary work from within the larger atmospheric science community.
Paryz, Roman W.
2014-01-01
Several upgrade projects have been completed at the NASA Langley Research Center National Transonic Facility over the last 1.5 years in an effort defined as STARBUKS - Subsonic Transonic Applied Refinements By Using Key Strategies. This multi-year effort was undertaken to improve NTF's overall capabilities by addressing Accuracy and Validation, Productivity, and Reliability areas at the NTF. This presentation will give a brief synopsis of each of these efforts.
Informal Risk Perceptions and Formal Theory
International Nuclear Information System (INIS)
Cayford, Jerry
2001-01-01
Economists have argued persuasively that our goals are wider than just risk minimization, and that they include a prudent weighing of costs and benefits. This economic line of thought recognizes that our policy goals are complex. As we widen the range of goals we are willing to entertain, though, we need to check that the methods we customarily employ are appropriate for the tasks to which we customarily apply them. This paper examines some economic methods of risk assessment, in light of the question of what our policy goals are and should be. Once the question of goals is open, more complexities than just cost intrude: what the public wants and why begs to be addressed. This leads us to the controversial issue of public risk perceptions. We have now examined a number of procedures that experts use to make public policy decisions. Behind all these issues is always the question of social welfare: what actions can we take, what policies should we embrace, to make the world a better place? In many cases, the public and the experts disagree about what the right choice is. In the first section, we saw a possible defense of the experts based on democratic theory: the people's participation, and even their will, can be legitimately set aside in the pursuit of their true interests. If this defense is to work, a great deal of weight rests on the question of the people's interests and the competence and integrity of the experts' pursuit of it. But at the same time, social preferences are ill-defined, and so are not good candidates for rational actor theory. Both the prescriptive legitimacy claim and the very workings of formal theory we have seen to depend on informal, qualitative, political judgments. Unfortunately, we have also seen a steady pattern of expert reliance on technical procedures even when they were manifestly unsuited to the task. The experts seem so intent on excluding informal thought that they would prefer even a bad quantitative process to a qualitative
Informal Risk Perceptions and Formal Theory
Energy Technology Data Exchange (ETDEWEB)
Cayford, Jerry [Resources for the Future, Washington, DC (United States)
2001-07-01
Economists have argued persuasively that our goals are wider than just risk minimization, and that they include a prudent weighing of costs and benefits. This economic line of thought recognizes that our policy goals are complex. As we widen the range of goals we are willing to entertain, though, we need to check that the methods we customarily employ are appropriate for the tasks to which we customarily apply them. This paper examines some economic methods of risk assessment, in light of the question of what our policy goals are and should be. Once the question of goals is open, more complexities than just cost intrude: what the public wants and why begs to be addressed. This leads us to the controversial issue of public risk perceptions. We have now examined a number of procedures that experts use to make public policy decisions. Behind all these issues is always the question of social welfare: what actions can we take, what policies should we embrace, to make the world a better place? In many cases, the public and the experts disagree about what the right choice is. In the first section, we saw a possible defense of the experts based on democratic theory: the people's participation, and even their will, can be legitimately set aside in the pursuit of their true interests. If this defense is to work, a great deal of weight rests on the question of the people's interests and the competence and integrity of the experts' pursuit of it. But at the same time, social preferences are ill-defined, and so are not good candidates for rational actor theory. Both the prescriptive legitimacy claim and the very workings of formal theory we have seen to depend on informal, qualitative, political judgments. Unfortunately, we have also seen a steady pattern of expert reliance on technical procedures even when they were manifestly unsuited to the task. The experts seem so intent on excluding informal thought that they would prefer even a bad quantitative process to
Incremental guideline formalization with tool support
Serban, Radu; Puig-Centelles, Anna; ten Teije, Annette
2006-01-01
Guideline formalization is recognized as an important component in improving computerized guidelines, which in turn leads to better informedness, lower inter-practician variability and, ultimately, to higher quality healthcare. By means of a modeling exercise, we investigate the role of guideline
Maintaining formal models of living guidelines efficiently
Seyfang, Andreas; Martínez-Salvador, Begoña; Serban, Radu; Wittenberg, Jolanda; Miksch, Silvia; Marcos, Mar; Ten Teije, Annette; Rosenbrand, Kitty C J G M
2007-01-01
Translating clinical guidelines into formal models is beneficial in many ways, but expensive. The progress in medical knowledge requires clinical guidelines to be updated at relatively short intervals, leading to the term living guideline. This causes potentially expensive, frequent updates of the
A New Formalism for Relational Algebra
DEFF Research Database (Denmark)
Schwartzbach, Michael Ignatieff; Larsen, Kim Skak; Schmidt, Erik Meineche
1992-01-01
We present a new formalism for relational algebra, the FC language, which is based on a novel factorization of relations. The acronym stands for factorize and combine. A pure version of this language is equivalent to relational algebra in the sense that semantics preserving translations exist...
14 CFR 201.1 - Formal requirements.
2010-01-01
... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Formal requirements. 201.1 Section 201.1 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) ECONOMIC... papers. (b) Any person desiring to provide air transportation as a commuter air carrier must comply with...
The Transition to Formal Thinking in Mathematics
Tall, David
2008-01-01
This paper focuses on the changes in thinking involved in the transition from school mathematics to formal proof in pure mathematics at university. School mathematics is seen as a combination of visual representations, including geometry and graphs, together with symbolic calculations and manipulations. Pure mathematics in university shifts…
Informal Science Learning in the Formal Classroom
Walsh, Lori; Straits, William
2014-01-01
In this article the authors share advice from the viewpoints of both a formal and informal educator that will help teachers identify the right Informal Science Institutions (ISIs)--institutions that specialize in learning that occurs outside of the school setting--to maximize their students' learning and use informal education to their…
Formal verification of algorithms for critical systems
Rushby, John M.; Von Henke, Friedrich
1993-01-01
We describe our experience with formal, machine-checked verification of algorithms for critical applications, concentrating on a Byzantine fault-tolerant algorithm for synchronizing the clocks in the replicated computers of a digital flight control system. First, we explain the problems encountered in unsynchronized systems and the necessity, and criticality, of fault-tolerant synchronization. We give an overview of one such algorithm, and of the arguments for its correctness. Next, we describe a verification of the algorithm that we performed using our EHDM system for formal specification and verification. We indicate the errors we found in the published analysis of the algorithm, and other benefits that we derived from the verification. Based on our experience, we derive some key requirements for a formal specification and verification system adequate to the task of verifying algorithms of the type considered. Finally, we summarize our conclusions regarding the benefits of formal verification in this domain, and the capabilities required of verification systems in order to realize those benefits.
Educational attainment, formal employment and contraceptives ...
African Journals Online (AJOL)
Based on this, the study examines educational attainment, formal employment and contraceptives practices among working women in Lagos State University. Survey design was adopted for the study. Using Stratified and simple random sampling techniques, quantitative data was gathered through the administration of ...
A Formal Model of Identity Mixer
DEFF Research Database (Denmark)
Camenisch, Jan; Mödersheim, Sebastian Alexander; Sommer, Dieter
2010-01-01
Identity Mixer is an anonymous credential system developed at IBM that allows users for instance to prove that they are over 18 years old without revealing their name or birthdate. This privacy-friendly tech- nology is realized using zero-knowledge proofs. We describe a formal model of Identity...
Simulation and formal analysis of visual attention
Bosse, T.; Maanen, P.P. van; Treur, J.
2009-01-01
In this paper a simulation model for visual attention is discussed and formally analysed. The model is part of the design of an agent-based system that supports a naval officer in its task to compile a tactical picture of the situation in the field. A case study is described in which the model is
A Formal Model For Declarative Workflows
DEFF Research Database (Denmark)
Mukkamala, Raghava Rao
it as a general formal model for specification and execution of declarative, event-based business processes, as a generalization of a concurrency model, the classic event structures. The model allows for an intuitive operational semantics and mapping of execution state by a notion of markings of the graphs and we...
Formal synthesis of naturally occurring norephedrine
Indian Academy of Sciences (India)
A concise and simple synthesis of 1-hydroxy-phenethylamine derivatives has been achieved following classical organic transformations using commercially available chiral pools. The said derivatives were explored for the synthesis of naturally occurring bio-active small molecules. Formal synthesis of norephedrine, virolin ...
Formalizing the Problem of Music Description
DEFF Research Database (Denmark)
Sturm, Bob L.; Bardeli, Rolf; Langlois, Thibault
2015-01-01
The lack of a formalism for “the problem of music descrip- tion” results in, among other things: ambiguity in what problem a music description system must address, how it should be evaluated, what criteria define its success, and the paradox that a music description system can reproduce the “ground...
A formal theory of the selfish gene.
Gardner, A; Welch, J J
2011-08-01
Adaptation is conventionally regarded as occurring at the level of the individual organism. In contrast, the theory of the selfish gene proposes that it is more correct to view adaptation as occurring at the level of the gene. This view has received much popular attention, yet has enjoyed only limited uptake in the primary research literature. Indeed, the idea of ascribing goals and strategies to genes has been highly controversial. Here, we develop a formal theory of the selfish gene, using optimization theory to capture the analogy of 'gene as fitness-maximizing agent' in mathematical terms. We provide formal justification for this view of adaptation by deriving mathematical correspondences that translate the optimization formalism into dynamical population genetics. We show that in the context of social interactions between genes, it is the gene's inclusive fitness that provides the appropriate maximand. Hence, genic selection can drive the evolution of altruistic genes. Finally, we use the formalism to assess the various criticisms that have been levelled at the theory of the selfish gene, dispelling some and strengthening others. © 2011 The Authors. Journal of Evolutionary Biology © 2011 European Society For Evolutionary Biology.
Rhythmic Characteristics of Colloquial and Formal Tamil
Keane, Elinor
2006-01-01
Application of recently developed rhythmic measures to passages of read speech in colloquial and formal Tamil revealed some significant differences between the two varieties, which are in diglossic distribution. Both were also distinguished from a set of control data from British English speakers reading an equivalent passage. The findings have…
Towards a Formal Framework for Computational Trust
DEFF Research Database (Denmark)
Nielsen, Mogens; Krukow, Karl Kristian; Sassone, Vladimiro
2006-01-01
We define a mathematical measure for the quantitative comparison of probabilistic computational trust systems, and use it to compare a well-known class of algorithms based on the so-called beta model. The main novelty is that our approach is formal, rather than based on experimental simulation....
Informal and Formal Learning of General Practitioners
Spaan, Nadia Roos; Dekker, Anne R. J.; van der Velden, Alike W.; de Groot, Esther
2016-01-01
Purpose: The purpose of this study is to understand the influence of formal learning from a web-based training and informal (workplace) learning afterwards on the behaviour of general practitioners (GPs) with respect to prescription of antibiotics. Design/methodology/approach: To obtain insight in various learning processes, semi-structured…
Informal and formal learning of general practitioners
Spaan, Nadia Roos; Dekker, Anne R. J.; van der Velden, Alike W.; de Groot, Esther
2016-01-01
Purpose The purpose of this study is to understand the influence of formal learning from a web-based training and informal (workplace) learning afterwards on the behaviour of general practitioners (GPs) with respect to prescription of antibiotics. Design/methodology/approach To obtain insight in
Revisiting the formal foundation of Probabilistic Databases
Wanders, B.; van Keulen, Maurice
2015-01-01
One of the core problems in soft computing is dealing with uncertainty in data. In this paper, we revisit the formal foundation of a class of probabilistic databases with the purpose to (1) obtain data model independence, (2) separate metadata on uncertainty and probabilities from the raw data, (3)
The formal path integral and quantum mechanics
International Nuclear Information System (INIS)
Johnson-Freyd, Theo
2010-01-01
Given an arbitrary Lagrangian function on R d and a choice of classical path, one can try to define Feynman's path integral supported near the classical path as a formal power series parameterized by 'Feynman diagrams', although these diagrams may diverge. We compute this expansion and show that it is (formally, if there are ultraviolet divergences) invariant under volume-preserving changes of coordinates. We prove that if the ultraviolet divergences cancel at each order, then our formal path integral satisfies a 'Fubini theorem' expressing the standard composition law for the time evolution operator in quantum mechanics. Moreover, we show that when the Lagrangian is inhomogeneous quadratic in velocity such that its homogeneous-quadratic part is given by a matrix with constant determinant, then the divergences cancel at each order. Thus, by 'cutting and pasting' and choosing volume-compatible local coordinates, our construction defines a Feynman-diagrammatic 'formal path integral' for the nonrelativistic quantum mechanics of a charged particle moving in a Riemannian manifold with an external electromagnetic field.
Moving interprofessional learning forward through formal assessment.
Stone, Judy
2010-04-01
There is increasing agreement that graduates who finish tertiary education with the full complement of skills and knowledge required for their designated profession are not 'work-ready' unless they also acquire interpersonal, collaborative practice and team-working capabilities. Health workers are unable to contribute to organisational culture in a positive way unless they too attain these capabilities. These capabilities have been shown to improve health care in terms of patient safety, worker satisfaction and health service efficiency. Given the importance of interprofessional learning (IPL) which seeks to address these capabilities, why is IPL not consistently embedded into the education of undergraduates, postgraduates and vocationally qualified personnel through formal assessment? This paper offers an argument for the formal assessment of IPL. It illustrates how the interests of the many stakeholders in IPL can benefit from, and contribute to, the integration of IPL into mainstream professional development and tertiary education. It offers practical examples of assessment in IPL which could drive learning and offer authentic, contextual teaching and learning experiences to undergraduates and health workers alike. Assessment drives learning and without formal assessment IPL will continue to be viewed as an optional topic of little relative importance for learners. In order to make the next step forward, IPL needs to be recognised and endorsed through formal assessment, both at the tertiary education level and within the workplace environment. This is supported by workforce initiatives and tertiary education policy which can be used to specify the capabilities or generic skills necessary for effective teamwork and collaborative practice.
Confusion about entrepreneurship? Formal versus informal small ...
African Journals Online (AJOL)
chestt
that contributes to both business formation and the ultimate expansion or growth of the business. The entrepreneurial actions related to these business activities are analysed in this study. The differential application of these actions in the formal and informal business panels is of particular importance for this study. Although ...
Formally analysing the concepts of domestic violence
Poelmans, J.; Elzinga, P.; Viaene, S.; Dedene, G.
2011-01-01
The types of police inquiries performed these days are incredibly diverse. Often data processing architectures are not suited to cope with this diversity since most of the case data is still stored as unstructured text. In this paper Formal Concept Analysis (FCA) is showcased for its exploratory
Formal and Applied Counseling in Israel
Israelashvili, Moshe; Wegman-Rozi, Orit
2012-01-01
Living in Israel is intensive and demanding but also meaningful and exciting. This article addresses the gap between the narrowly defined formal status of counseling in Israel and the widespread occurrence of counseling in various settings. It is argued that several recent changes, especially in the definition of treatment, along with the…
A formal model for total quality management
S.C. van der Made-Potuijt; H.B. Bertsch (Boudewijn); L.P.J. Groenewegen
1996-01-01
textabstractTotal Quality Management (TQM) is a systematic approach to managing a company. TQM is systematic in the sense that it is uses facts through observation, analysis and measurable goals. There are theoretical descriptions of this management concept, but there is no formal model of it. A
Electric current arising from unpolarized polyvinyl formal
Indian Academy of Sciences (India)
Unknown
An appreciable electric current is observed in a system consisting of a polyvinyl formal (PVF) film in a sandwich ... Electric current; open circuit voltage; water activated phenomenon; plasticization effect. 1. Introduction ... either the trapping parameters or the distribution of the ..... For this reason contact potential drop between.
A Formal Model for Context-Awareness
DEFF Research Database (Denmark)
Kjærgaard, Mikkel Baun; Bunde-Pedersen, Jonathan
here is a definite lack of formal support for modeling real- istic context-awareness in pervasive computing applications. The Conawa calculus presented in this paper provides mechanisms for modeling complex and interwoven sets of context-information by extending ambient calculus with new construc...
Formal system of communication and understanding. II
Energy Technology Data Exchange (ETDEWEB)
Zsuzsanna, M
1982-01-01
For pt.I see IBID., no.5, p.252-8 (1982). In this article G. Pask's (1975) formal theory of dialogues and talk is summarized. Part II describes the talk-environment and modelling. The conscious systems and machine-intelligence are mainly dealt with. Finally a couple of cases with Pask's theory implemented are looked at. 7 references.
Formal demography of families and households
Willekens, F.J.; van Imhoff, E.; Wright, James D.
2015-01-01
‘Family and household demography’ differs from traditional demography in that it explicitly recognizes and studies relationships between individuals. Formal demography focuses on the definition and measurement of families and households, and modeling of types, number, and composition of families and
Schultz, James
2003-01-01
While this is a self-contained history of NASA Langley Research Center's contributions to flight, many other organizations around the country played a vital role in the work described in this book.When you pass through the front gates of NASA Langley Research Center you are entering an extraordinary place. You could easily miss that fact, however. A few years cross-state bicycle tour passed through the Center. As interesting as looping around Center was, the riders observed that nothing about the vaguely industrial site fit the conventional stereotypes of what high tech looks like. NASA Langley does not fit many stereotypes. It takes a close examination to discover the many ways it has contributed to development of flight. As part of the national celebrations commemorating the 100th anniversary of the Wright brothers first flight, James Schultz, an experienced journalist with a gift for translating the language of engineers and scientists into prose that nonspecialists can comprehend, has revised and expanded Winds of Change , his wonderful guide to the Center. This revised book, Crafting Flight , invites you inside. You will read about one of the Nation s oldest research and development facilities, a place of imagination and ingenuity.
A formal safety analysis for PLC software-based safety critical system using Z
International Nuclear Information System (INIS)
Koh, Jung Soo
1997-02-01
This paper describes a formal safety analysis technique which is demonstrated by performing empirical formal safety analysis with the case study of beamline hutch door Interlock system that is developed by using PLC (Programmable Logic Controller) systems at the Pohang Accelerator Laboratory. In order to perform formal safety analysis, we have built the Z formal specifications representation from user requirement written in ambiguous natural language and target PLC ladder logic, respectively. We have also studied the effective method to express typical PLC timer component by using specific Z formal notation which is supported by temporal history. We present a formal proof technique specifying and verifying that the hazardous states are not introduced into ladder logic in the PLC-based safety critical system. And also, we have found that some errors or mismatches in user requirement and final implemented PLC ladder logic while analyzing the process of the consistency and completeness of Z translated formal specifications. In the case of relatively small systems like Beamline hutch door interlock system, a formal safety analysis including explicit proof is highly recommended so that the safety of PLC-based critical system may be enhanced and guaranteed. It also provides a helpful benefits enough to comprehend user requirement expressed by ambiguous natural language
Standard superfields in the harmonic formalism of supergauge theories
International Nuclear Information System (INIS)
Zupnik, B.M.; Tolstonog, L.V.
1989-01-01
Connection between the standard superfield formalism and the harmonic superspace method is studied in the 6-dimensional and extended 4-dimensional supergauge theories. The action of the abelian theory is expressed in terms of the real prepotential V ik . A generalization for the non-abelian case can be performed with the help of the iterative method. Analysing the supergauge theory with the gauge group SU(2) the authors exploit the exact solution of the equations for the harmonic superfield connections which can be expressed in terms of the real prepotential V iklm in a special gauge
20 CFR 702.336 - Formal hearings; new issues.
2010-04-01
... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Formal hearings; new issues. 702.336 Section... Procedures Formal Hearings § 702.336 Formal hearings; new issues. (a) If, during the course of the formal hearing, the evidence presented warrants consideration of an issue or issues not previously considered...
Directory of Open Access Journals (Sweden)
Andreas Witzel
2004-09-01
Full Text Available In this interview, which was conducted mainly by e-mail, we trace the evolution of Aaron V. CICOUREL's thinking and career. In Part 1 we begin with his undergraduate education, then as a doctoral student, as an assistant professor, and his experiences with field research. Part 2 contains his critical reflections on the ecological validity problem which underlie self-contained interviews and surveys that lack ethnographic data. In Part 3 he shows that it is necessary—and this is his specific contribution to the qualitative approach—to reflect on respondents' daily life experiences and understanding of fixed-choice or open-ended questions. Many strategies for valid interviews are also discussed in this part. Part 4 contains CICOUREL's reflections on the broad field of qualitative research and his own current research on daily life decision-making, routine information and communication processing, or activating memory. Different methods for analyzing natural settings are proposed. In the Part 5 general developments in qualitative research—challenges, obstacles and solutions—are pointed out. In Part 6 CICOUREL describes national differences of research cultures in the United States, Europe, and Latin America. URN: urn:nbn:de:0114-fqs0403412
Survey of formal and informal citation in Google search engine
Directory of Open Access Journals (Sweden)
Afsaneh Teymourikhani
2016-03-01
Full Text Available Aim: Informal citations is bibliographic information (title or Internet address, citing sources of information resources for informal scholarly communication and always neglected in traditional citation databases. This study is done, in order to answer the question of whether informal citations in the web environment are traceable. The present research aims to determine what proportion of web citations of Google search engine is related to formal and informal citation. Research method: Webometrics is the method used. The study is done on 1344 research articles of 98 open access journal, and the method that is used to extract the web citation from Google search engine is “Web / URL citation extraction". Findings: The findings showed that ten percent of the web citations of Google search engine are formal and informal citations. The highest formal citation in the Google search engine with 19/27% is in the field of library and information science and the lowest official citation by 1/54% is devoted to the field of civil engineering. The highest percentage of informal citations with 3/57% is devoted to sociology and the lowest percentage of informal citations by 0/39% is devoted to the field of civil engineering. Journal Citation is highest with 94/12% in the surgical field and lowest with 5/26 percent in the philosophy filed. Result: Due to formal and informal citations in the Google search engine which is about 10 percent and the reduction of this amount compared to previous research, it seems that track citations by this engine should be treated with more caution. We see that the amount of formal citation is variable in different disciplines. Cited journals in the field of surgery, is highest and in the filed of philosophy is lowest, this indicates that in the filed of philosophy, that is a subset of the social sciences, journals in scientific communication do not play a significant role. On the other hand, book has a key role in this filed
Y-formalism and b ghost in the non-minimal pure spinor formalism of superstrings
International Nuclear Information System (INIS)
Oda, Ichiro; Tonin, Mario
2007-01-01
We present the Y-formalism for the non-minimal pure spinor quantization of superstrings. In the framework of this formalism we compute, at the quantum level, the explicit form of the compound operators involved in the construction of the b ghost, their normal-ordering contributions and the relevant relations among them. We use these results to construct the quantum-mechanical b ghost in the non-minimal pure spinor formalism. Moreover we show that this non-minimal b ghost is cohomologically equivalent to the non-covariant b ghost
INTERCULTURAL ISSUES IN FORMAL PARTNERSHIPS - DIAGNOSIS AND SOLUTIONS
Directory of Open Access Journals (Sweden)
Irina MANOLESCU
2014-04-01
Full Text Available Today, collaboration, information and resource sharing with different (and sometimes even competing organizations have been viewed as key for success building. Encouraged by the European and national institutions, formal partnerships, whether temporary or permanent, such as grant writing agreements, clusters, regional working groups or networks have become more widespread in the socio-economic environment. This paper aims to investigate the most important intercultural issues in various types of formal partnerships built in Romanian public and private organizations and to identify solutions to these problems. In order to provide a solid, research-based approach to our study, we studied the evaluation reports of programs and projects involving partnerships and conducted interviews with people involved in the development and implementation of joint activities. The application of results is straightforward: the organizations will raise their awareness of the importance of an intercultural analysis when participating in a formal partnership and will take into account the implementation of appropriate methods in order to overcome intercultural challenges.
Towards a Formal Model of Privacy-Sensitive Dynamic Coalitions
Directory of Open Access Journals (Sweden)
Sebastian Bab
2012-04-01
Full Text Available The concept of dynamic coalitions (also virtual organizations describes the temporary interconnection of autonomous agents, who share information or resources in order to achieve a common goal. Through modern technologies these coalitions may form across company, organization and system borders. Therefor questions of access control and security are of vital significance for the architectures supporting these coalitions. In this paper, we present our first steps to reach a formal framework for modeling and verifying the design of privacy-sensitive dynamic coalition infrastructures and their processes. In order to do so we extend existing dynamic coalition modeling approaches with an access-control-concept, which manages access to information through policies. Furthermore we regard the processes underlying these coalitions and present first works in formalizing these processes. As a result of the present paper we illustrate the usefulness of the Abstract State Machine (ASM method for this task. We demonstrate a formal treatment of privacy-sensitive dynamic coalitions by two example ASMs which model certain access control situations. A logical consideration of these ASMs can lead to a better understanding and a verification of the ASMs according to the aspired specification.
Practical Formal Verification of MPI and Thread Programs
Gopalakrishnan, Ganesh; Kirby, Robert M.
Large-scale simulation codes in science and engineering are written using the Message Passing Interface (MPI). Shared memory threads are widely used directly, or to implement higher level programming abstractions. Traditional debugging methods for MPI or thread programs are incapable of providing useful formal guarantees about coverage. They get bogged down in the sheer number of interleavings (schedules), often missing shallow bugs. In this tutorial we will introduce two practical formal verification tools: ISP (for MPI C programs) and Inspect (for Pthread C programs). Unlike other formal verification tools, ISP and Inspect run directly on user source codes (much like a debugger). They pursue only the relevant set of process interleavings, using our own customized Dynamic Partial Order Reduction algorithms. For a given test harness, DPOR allows these tools to guarantee the absence of deadlocks, instrumented MPI object leaks and communication races (using ISP), and shared memory races (using Inspect). ISP and Inspect have been used to verify large pieces of code: in excess of 10,000 lines of MPI/C for ISP in under 5 seconds, and about 5,000 lines of Pthread/C code in a few hours (and much faster with the use of a cluster or by exploiting special cases such as symmetry) for Inspect. We will also demonstrate the Microsoft Visual Studio and Eclipse Parallel Tools Platform integrations of ISP (these will be available on the LiveCD).
Sijtema, M.; Salaün, G.; Schätz, B.; Belinfante, Axel; Stoelinga, Mariëlle Ida Antoinette; Marinelli, L.
2014-01-01
We report on the actual industrial use of formal methods during the development of a software bus. During an internship at Neopost Inc., of 14 weeks, we developed the server component of a software bus, called the XBus, using formal methods during the design, validation and testing phase: we modeled
Sijtema, Marten; Stoelinga, Mariëlle Ida Antoinette; Belinfante, Axel; Marinelli, Lawrence; Salaün, Gwen; Schätz, Bernhard
We report on the actual industrial use of formal methods during the development of a software bus. At Neopost Inc., we developed the server component of a software bus, called the XBus, using formal methods during the design, validation and testing phase: We modeled our design of the XBus in the
Increasing Access to Atmospheric Science Research at NASA Langley Research Center
Chambers, L. H.; Bethea, K. L.; LaPan, J. C.
2013-12-01
The Science Directorate (SD) at NASA's Langley Research Center conducts cutting edge research in fundamental atmospheric science topics including radiation and climate, air quality, active remote sensing, and upper atmospheric composition. These topics matter to the public, as they improve our understanding of our home planet. Thus, we have had ongoing efforts to improve public access to the results of our research. These efforts have accelerated with the release of the February OSTP memo. Our efforts can be grouped in two main categories: 1. Visual presentation techniques to improve science understanding: For fundamental concepts such as the Earth's energy budget, we have worked to display information in a more "digestible" way for lay audiences with more pictures and fewer words. These audiences are iPad-lovers and TV-watchers with shorter attention spans than audiences of the past. They are also educators and students who need a basic understanding of a concept delivered briefly to fit into busy classroom schedules. We seek to reach them with a quick, visual message packed with important information. This presentation will share several examples of visual techniques, such as infographics (e.g., a history of lidar at Langley and a timeline of atmospheric research, ozone garden diagrams (http://science-edu.larc.nasa.gov/ozonegarden/ozone-cycle.php); history of lidar at LaRC; DISCOVER-AQ maps. It will also share examples of animations and interactive graphics (DISCOVER-AQ); and customized presentations (e.g., to explain the energy budget or to give a general overview of research). One of the challenges we face is a required culture shift between the way scientists traditionally share knowledge with each other and the way these public audiences ingest knowledge. A cross-disciplinary communications team in SD is crucial to bridge that gap. 2. Lay research summaries to make research more accessible: Peer-reviewed publications are a primary product of the SD, with more
Computational Simulations of the NASA Langley HyMETS Arc-Jet Facility
Brune, A. J.; Bruce, W. E., III; Glass, D. E.; Splinter, S. C.
2017-01-01
The Hypersonic Materials Environmental Test System (HyMETS) arc-jet facility located at the NASA Langley Research Center in Hampton, Virginia, is primarily used for the research, development, and evaluation of high-temperature thermal protection systems for hypersonic vehicles and reentry systems. In order to improve testing capabilities and knowledge of the test article environment, an effort is underway to computationally simulate the flow-field using computational fluid dynamics (CFD). A detailed three-dimensional model of the arc-jet nozzle and free-jet portion of the flow-field has been developed and compared to calibration probe Pitot pressure and stagnation-point heat flux for three test conditions at low, medium, and high enthalpy. The CFD model takes into account uniform pressure and non-uniform enthalpy profiles at the nozzle inlet as well as catalytic recombination efficiency effects at the probe surface. Comparing the CFD results and test data indicates an effectively fully-catalytic copper surface on the heat flux probe of about 10% efficiency and a 2-3 kpa pressure drop from the arc heater bore, where the pressure is measured, to the plenum section, prior to the nozzle. With these assumptions, the CFD results are well within the uncertainty of the stagnation pressure and heat flux measurements. The conditions at the nozzle exit were also compared with radial and axial velocimetry. This simulation capability will be used to evaluate various three-dimensional models that are tested in the HyMETS facility. An end-to-end aerothermal and thermal simulation of HyMETS test articles will follow this work to provide a better understanding of the test environment, test results, and to aid in test planning. Additional flow-field diagnostic measurements will also be considered to improve the modeling capability.
Generalizing Prototype Theory: A Formal Quantum Framework
Aerts, Diederik; Broekaert, Jan; Gabora, Liane; Sozzo, Sandro
2016-01-01
Theories of natural language and concepts have been unable to model the flexibility, creativity, context-dependence, and emergence, exhibited by words, concepts and their combinations. The mathematical formalism of quantum theory has instead been successful in capturing these phenomena such as graded membership, situational meaning, composition of categories, and also more complex decision making situations, which cannot be modeled in traditional probabilistic approaches. We show how a formal quantum approach to concepts and their combinations can provide a powerful extension of prototype theory. We explain how prototypes can interfere in conceptual combinations as a consequence of their contextual interactions, and provide an illustration of this using an intuitive wave-like diagram. This quantum-conceptual approach gives new life to original prototype theory, without however making it a privileged concept theory, as we explain at the end of our paper. PMID:27065436
The formal logic of business rules
Directory of Open Access Journals (Sweden)
Ivana Rábová
2007-01-01
Full Text Available Identification of improvement areas and utilization of information and communication technologies have gained value and priority in our knowledge driven society. Rules define constraints, conditions and policies of how the business processes are to be performed but they also affect the behavior of the resource and facilitate strategic business goals achieving. They control the business and represent business knowledge. The research works about business rules show how to specify and classify business rules from the business perspective and to establish an approach to managing them that will enable faster change in business processes and other business concepts in all areas of the business. In concrete this paper deals with four approaches to business rules formalization, i. e. notation of OCL, inference rules, decision table and predicate logic and with their general evaluation. The article shows also the advantages and disadvantages of these approaches of formalization. They are the example of every mentioned approach.
A Formal Framework for Workflow Analysis
Cravo, Glória
2010-09-01
In this paper we provide a new formal framework to model and analyse workflows. A workflow is the formal definition of a business process that consists in the execution of tasks in order to achieve a certain objective. In our work we describe a workflow as a graph whose vertices represent tasks and the arcs are associated to workflow transitions. Each task has associated an input/output logic operator. This logic operator can be the logical AND (•), the OR (⊗), or the XOR -exclusive-or—(⊕). Moreover, we introduce algebraic concepts in order to completely describe completely the structure of workflows. We also introduce the concept of logical termination. Finally, we provide a necessary and sufficient condition for this property to hold.