Study on the determination of ore-formation age of primary gold ore

International Nuclear Information System (INIS)

Ying Junlong; Zhao Puyun; Guo Hong

1997-01-01

The accurate determination of gold ore-formation age and ore-source isotope composition are of important significance in the research on gold geology and prospecting. According to the summary of three year indoor and field work, the ore-formation ages and isotope compositions of some typical gold deposits were obtained: The age of gold ore of the Wuhuaaobao deposit in geo-syncline region north to the north margin of North-China paleo-land is 130-120 Ma corresponding to the Late-orogenic stage. The ore-formation age of the Saiwusu gold deposit in the southern platform region is 211 +- 15 Ma, recycling reworking of the old-land. The Hougou-Huangtuliang gold deposit located in the middle of the platform region is 243 +- 7 Ma old attributed to the regeneration ore-formation on the old-land. the age of Jiaojia-Rushan gold deposit in Eastern Shandong is 122.7 +- 3.4 Ma and 128 +- 23 Ma belonging to Yanshanian stage. The Babaoshan gold-silver deposit in Cathaysian old-land is 140 +- 5 Ma old originated from volcanic hydrothermal ore-formation

Evolution of mineralizing brines in the east Tennessee Mississippi Valley-type ore field

Energy Technology Data Exchange (ETDEWEB)

Kesler, S.E.; Gesink, J.A.; Haynes, F.M. (Univ. of Michingan, Ann Arbor (USA))

1989-05-01

The east Tennessee Mississippi Valley-type (MVT) ore field contains barite-fluorite and sphalterite deposits in a continuous paleoaquifer consisting of breccia zones in the Upper Cambrian-Lower Ordovician Knox Group. Paragenetic observations and fluid inclusion compositions in these deposits indicate that the Knox paleoaquifer was invaded first by Ca-rich brines (Ca:Na about 1) that deposited fluorite and barite, and later by Na-Ca brines (Ca:Na = 0.1 to 0.5) that deposited sphalerite. Geologic relation sindicate that these brines were derived from the southeast, in the area of the Middle Ordovician Servier foreland shale basin, and that imposed by fluorite solubility indicate further that all original connate water in the Sevier basin was required to deposit the estimated flourite reserves of the ore field.Thus, the later, sphalerite-depositing brines represent recycled meteoric water from the Sevier basin or connate brines from underlying (Cambrian) shales.

The treatment of uranium ores

International Nuclear Information System (INIS)

Michel, P.

1979-01-01

After having described the main steps in the treatment of uranium ores, the author describes the treament activities for these ores, as they are organized in France and in the African countries having made cooperation agreements with France in this field [fr

Possible uranium sources of Streltsovsky uranium ore field

International Nuclear Information System (INIS)

Zhang Lisheng

2005-01-01

The uranium deposit of the Late Jurassic Streltsovaky caldera in Transbaikalia of Russia is the largest uranium field associated with volcanics in the world, its uranium reserves are 280 000 t U, and it is the largest uranium resources in Russia. About one third of the caldera stratigraphic pile consists of strongly-altered rhyolites. Uranium resources of the Streltsovsky caldera are much larger than any other volcanic-related uranium districts in the world. Besides, the efficiency of hydrothermal alteration, uranium resources appear to result from the juxtaposition of two major uranium sources; highly fractionated peralkaline rhyolites of Jurassic age in the caldera, and U-rich subalkaline granites of Variscan age in the basement in which the major uranium-bearing accessory minerals were metamict at the time of the hydrothermal ore formation. (authors)

Difference of ore-bearing and non-ore-bearing pegmatite in the Guangshigou area and its research significance

International Nuclear Information System (INIS)

Zuo Wenqian; Zhang Zhanshi; Sha Yazhou; Rao Chaojun

2011-01-01

Guangshigou uranium deposit is one of the typical granite-pegmatite uranium deposits in China, the ore-body are located in the density zone of the outside contact zone of granite pluton. To distinguish the ore-bearing and Non-ore-bearing pegmatite is one of the most practices and have great significance for the effect of mineral exploration. Based on the field investigation and former research results, contrast research on the characteristics of the pegmatite on petrology, geophysical, geochemistry and stable isotopes have been carried out. It is pointed out that the ore-bearing pegmatite differ from the non-ore-bearing one from macro-and-micro-view in Guangshigou Uranium deposits, the main characteristics are summarized; the macro-and-micro signs are established, the genetic difference between the ore-bearing and non-ore-bearing pegmatite are discussed primarily. The achievements would be helpful for prospecting and researching of this type uranium deposits in China. (authors)

Geological-economic analysis on the exploration of backup resources for depleted mines in Lujing uranium ore-field, central-southern China

International Nuclear Information System (INIS)

Li Deping; Wang Zhicheng; Fan Shaoyun

2006-01-01

With the geological-economic evaluation program for pithead heap-leaching mining uranium deposits developed by the authors and the data of column-leaching tests and the geological reserve, the geological-economic evaluation is made to the residual geological reserves of both Lujing and Huangfengling deposit, and the geological reserves of Yangjiaonao deposit of the depleted mines in Lujing uranium ore-field, central-southern China. The results of static analysis on these reserves show that the residual geological reserves of both Lujing and Huangfengling deposit belong to sub-profitable type, but the ones of Yangjiaonao deposit is profitable with 26.56% tax-before profit. 1 tU profitable type of ore from Yangjiaonao deposit can use 2.40-3.79 tU subprofitable type of ores from Lujing and Huangfengling deposit. In order to solving the problem on scarcity of backup resources of the depleted mines in Lujing uranium ore-field and using the existing sub-profitable type of geological reserves, it is suggested that the high grade of profitable type of deposits should be explored around the exhausting mines so that the production of the mines could be profitable by the pithead heap-leaching mining method with arrangement groups of both sub-profitable and profitable type of ores. (authors)

Control of Rock Mechanics in Underground Ore Mining

Science.gov (United States)

Golik, V. I.; Efremenkov, A. B.

2017-07-01

Performance indicators in underground mining of thick iron fields can be insufficient since geo-mechanic specifics of ore-hosting fields might be considered inadequately, as a consequence, critical deformations and even earth’s surface destruction are possible, lowering the indicators of full subsurface use, this way. The reason for it is the available approach to estimating the performance of mining according to ore excavation costs, without assessing losses of valuable components and damage to the environment. The experimental approach to the problem is based on a combination of methods to justify technical capability and performance of mining technology improvement with regard to geomechanical factors. The main idea of decisions to be taken is turning geo-materials into the condition of triaxial compression via developing the support constructions of blocked up structural rock block. The study was carried out according to an integrated approach based on the analysis of concepts, field observations, and simulation with the photo-elastic materials in conditions of North Caucasus deposits. A database containing information on the deposit can be developed with the help of industrial experiments and performance indicators of the field can be also improved using the ability of ore-hosting fields to develop support constructions, keeping the geo-mechanical stability of the system at lower cost, avoiding ore contamination at the processing stage. The proposed model is a specific one because an adjustment coefficient of natural and anthropogenic stresses is used and can be adopted for local conditions. The relation of natural to anthropogenic factors can make more precise the standards of developed, prepared and ready to excavation ore reserves relying on computational methods. It is possible to minimize critical stresses and corresponding deformations due to dividing the ore field into sectors safe from the standpoint of geo-mechanics, and using less cost

Application of AMT in detecting deep geological structures in Lejia district of Xiangshan uranium ore field

International Nuclear Information System (INIS)

Duan Shuxin; Liu Hu

2014-01-01

In recent years, exploration in Xiangshan uranium ore field shows that the intersection of faults and the interface of different rock formation and the basement is an important sign of deep ore- prospecting. In order to evaluate deep uranium resource in Lejia district, audio magnetotelluric method (AMT) was undertaken to carry out profile investigation. With that method, we discerned the interface of different rock formation and the basement successfully, and faults in the deep, which provides a good basis for the prediction of deep uranium resource. Drilling results show that AMT method has an obvious advantage in detecting deep geological structures in Xiangshan. (authors)

Radiometric enrichment of nonradioactive ores

International Nuclear Information System (INIS)

Mokrousov, V.A.; Lileev, V.A.

1979-01-01

Considered are the methods of mineral enrichment based on the use of the radioation of various types. The physical essence of enrichment processes is presented, their classification is given. Described are the ore properties influencing the efficiency of radiometric enrichment, methods of the properties study and estimation of ore enrichment. New possibilities opened by radiometric enrichment in the technology of primary processing of mineral raw materials are elucidated. A considerable attention is paid to the main and auxiliary equipment for radiometric enrichment. The foundations of the safety engineering are presented in a brief form. Presented are also results of investigations and practical works in the field of enrichment of ores of non-ferrous, ferrous and non-metallic minerals with the help of radiometric methods

Rock-magnetism and ore microscopy of the magnetite-apatite ore deposit from Cerro de Mercado, Mexico

Science.gov (United States)

Alva-Valdivia, L. M.; Goguitchaichvili, A.; Urrutia-Fucugauchi, J.; Caballero-Miranda, C.; Vivallo, W.

2001-03-01

Rock-magnetic and microscopic studies of the iron ores and associated igneous rocks in the Cerro de Mercado, Mexico, were carried out to determine the magnetic mineralogy and origin of natural remanent magnetization (NRM), related to the thermo-chemical processes due to hydrothermalism. Chemical remanent magnetization (CRM) seems to be present in most of investigated ore and wall rock samples, replacing completely or partially an original thermoremanent magnetization (TRM). Magnetite (or Ti-poor titanomagnetite) and hematite are commonly found in the ores. Although hematite may carry a stable CRM, no secondary components are detected above 580°, which probably attests that oxidation occurred soon enough after the extrusion and cooling of the ore-bearing magma. NRM polarities for most of the studied units are reverse. There is some scatter in the cleaned remanence directions of the ores, which may result from physical movement of the ores during faulting or mining, or from perturbation of the ambient field during remanence acquisition by inhomogeneous internal fields within these strongly magnetic ore deposits. The microscopy study under reflected light shows that the magnetic carriers are mainly titanomagnetite, with significant amounts of ilmenite-hematite minerals, and goethite-limonite resulting from alteration processes. Magmatic titanomagnetites, which are found in igneous rocks, show trellis, sandwich, and composite textures, which are compatible with high temperature (deuteric) oxy-exsolution processes. Hydrothermal alteration in ore deposits is mainly indicated by martitization in oxide minerals. Grain sizes range from a few microns to >100 mm, and possible magnetic state from single to multidomain, in agreement with hysteresis measurements. Thermal spectra, continuous susceptibility measurements, and IRM (isothermal remanent magnetization) acquisition suggest a predominance of spinels as magnetic carriers, most probably titanomagnetites with low

The discovery of hornblende-garnet-zoisite hornfels in the metamorphic basement of Xiangshan uranium ore field

International Nuclear Information System (INIS)

Jiang Zhenpin; Dong Yongjie; Yu Jianfa; Hu Rongquan; Wu Shuilin

2007-01-01

Some vein rocks are found among mica schist in the metamorphic rock area of the Xiangshan uranium ore field. They are petrologically denominated as hornblende-garnet-zoisite hornfels. The primitive rocks are basic vein rocks. The hornfels are formed under thermal metamorphism with the temperature about 640 degree C and belong to low-pressure faces. This is closed to the form condition of EarlyMiddle Proterozoic metamorphic rocks in the area. The metamorphism forming the hornfels means that the Early-Middle Proterozoic metamorphic rocks was superimposed to another thermal metamorphism and produced the second phase metamorphic minerals such as staurolite, almandine and biotite. The lattice of the second phase metamorphic mineral developed continuously with the first phase minerals. The overlapping metamorphism made the first phase metamorphic mineral suffer recrystallization, auto purification and idiomorphism. The discovery of hornfelsed basic rock veins discloses that strong geologic process with the activity of fault, magma and metamorphism were still taken placed in Paleozoic era within the metamorphic basement of the Xiangshan uranium ore field. (authors)

Treatment of bastnaesite ore from Vietnamese Socialist Republic

International Nuclear Information System (INIS)

Formanek, J.; Jerabek, J.; Jancarek, J.

1987-01-01

From the Vietnamese deposit at Nam Nam Xe Czechoslovakia imported several hundred tons of ore. Several methods of ore dressing were used: gravitational, preconcentration in electromagnetic field, magnetic separation, high-intesity electromagnetic separation. Flotation evidently was the best dressing method tried. The results are presented of testing using different flotation agents. (E.S.)

The basement control on Xiazhuang uranium ore field in south sector of Wuyi tumescence and relevant geological problems

International Nuclear Information System (INIS)

Xu Dazhong; Xue Zhenhua

1994-01-01

Based on the two rift-trench tectonic framework in Wuyi as well as its adjacent areas proposed previously, this study takes Yingtan-Nancheng-Anyuan-Heyuan tenacity fracture belt as the geological boundary between two types of uranium deposits (granite and volcanic rock). It is noted that the distinct function of Caledonian movement in this area is the formation of the linear migmatization and granitization on the basis of rift and tumescence basement. Simultaneously, according to the new discovery of hypometamorphic rock and large scaled ductile mylonitized zone in Xiazhuang uranium ore field and its adjacent area, it is concluded that the Xiazhuang uranium ore field is the result of multiple tectonism and magmatic activations on the Caledonian hot dome on the basis of ancient basement. Because the uranium mineralization is present in two kinds of rocks (ductile and brittle), it is suggested that the types of mineralization in Xiazhuang can be considered in order to guide the further prospecting

The relationship of structures and geological-building of Rudòany ore field to geotechnics features

Directory of Open Access Journals (Sweden)

Vavrek Pavol

1999-12-01

Full Text Available The geostructural and geotechnical analysis was aimed at the concrete conditions of the Rudòany ore field at the Spiš region, the part of the Slovak Republic. Our research results make it possible to minimalize the negative influence of moisture liquidation of the mine field from the ecological point of view. The paper is devided into followings parts: present and future moisture liquidations and their influences on surface subsidences, the theoretical principles for the geotechnical evaluation of the subsidences and application of the principles.

Ores and Climate Change - Primary Shareholders

Science.gov (United States)

Stein, Holly J.; Hannah, Judith L.

2015-04-01

Many in the economic geology community concern themselves with details of ore formation at the deposit scale, whether tallying fluid inclusion data to get at changes in ore-forming fluids or defining structures that aid and abet mineralization. These compilations are generally aimed at interpretation of events at the site of ore formation, with the goal being assignment of the deposit to a sanctioned ore deposit model. While providing useful data, this approach is incomplete and does not, by itself, serve present-day requirements for true interdisciplinary science. The ore-forming environment is one of chaos and disequilibrium at nearly all scales (Stein, 2014). Chaos and complexity are documented by variably altered rocks, veins or disseminated mineralization with multi-generational fluid histories, erratic and unusual textures in host rocks, and the bitumen or other hydrocarbon products entwined within many ore deposits. This should give pause to our drive for more data as a means to find "the answer". The answer lies in the kind of data collected and more importantly, in the way we interpret those data. Rather than constructing an ever-increasing catalog of descriptive mutations on sanctioned ore deposit models (e.g., IOGC or Iron-Oxide Copper Gold deposits), the way forward is to link source and transport of metals, sulfur, and organic material with regional and ultimately whole Earth chemical evolution. Important experimental work provides chemical constraints in controlled and behaved environments. To these data, we add imagination and interpretation, always tying back to field observations. In this paper, several key points are made by way of ore deposit examples: (1) many IOCG deposits are outcomes of profound changes in the chemistry of the Earth's surface, in the interplay of the atmosphere, hydrosphere, biosphere, and lithosphere; (2) the redox history of Fe in deep earth may be ultimately expressed in the ore-forming sequence; and (3) the formation of

Mineral types of hydrothermal alteration zones in the Dukat ore field and their relationships to leucogranite and epithermal gold-silver ore, northeastern Russia

Science.gov (United States)

Filimonova, L. G.; Trubkin, N. V.; Chugaev, A. V.

2014-05-01

The paper considers the localization of potassic and propylitic hydrothermal alteration zones in the domal volcanic-plutonic structure controlling the position of the Dukat ore field with the eponymous unique epithermal Au-Ag deposit. Comprehensive mineralogical and geochemical data on rocks and minerals in hydrothermal alteration zones and associated intrusions have shown that quartz-jarosite-sericite, quartz-pyrite-sericite, and quartz-adularia-chlorite alterations were formed with the participation of fluid flows related to a fingerlike projection of a high-K leucogranite porphyry intrusion with large phenocrysts. These hydrothermal alterations developed in the rifted graben under conditions of divergent plate boundaries, whereas quartz-clinozoisite-calcite, epidote-chlorite, and garnet-calcite-chlorite alterations were linked to K-Na leucogranite intrusive bodies and developed under conditions of convergent plate boundaries reactivated as a result of formation of the marginal Okhotsk-Chukotka volcanic belt. Phase separation and coagulation of specific portions of ascending fluids resulted in the formation and stabilization of small-sized particles of native silver and other ore components, which enabled involvement in flows of secondary geothermal solutions and ore-forming fluids. The Sr, Nd, and Pb isotopic compositions of rocks and minerals from the hydrothermal alteration zones, associated intrusions, and economic orebodies at the Dukat deposit indicate that their components have been derived from the juvenile continental crust, which was altered in pre-Cretaceous periods of endogenic activity. The components of gangue minerals of potassic and propylitic hydrothertmal alterations and associated intrusions have been taken from deep sources differing in 87Sr/86Sr and 143Nd/144Nd at similar U/Pb and Th/Pb ratios. Chalcophile lead in products of hydrothermal activity and melanocratic inclusions in leucogranite has been taken from regions with elevated U/Pb and

Uranium ores

International Nuclear Information System (INIS)

Poty, B.; Roux, J.

1998-01-01

The processing of uranium ores for uranium extraction and concentration is not much different than the processing of other metallic ores. However, thanks to its radioactive property, the prospecting of uranium ores can be performed using geophysical methods. Surface and sub-surface detection methods are a combination of radioactive measurement methods (radium, radon etc..) and classical mining and petroleum prospecting methods. Worldwide uranium prospecting has been more or less active during the last 50 years, but the rise of raw material and energy prices between 1970 and 1980 has incited several countries to develop their nuclear industry in order to diversify their resources and improve their energy independence. The result is a considerable increase of nuclear fuels demand between 1980 and 1990. This paper describes successively: the uranium prospecting methods (direct, indirect and methodology), the uranium deposits (economical definition, uranium ores, and deposits), the exploitation of uranium ores (use of radioactivity, radioprotection, effluents), the worldwide uranium resources (definition of the different categories and present day state of worldwide resources). (J.S.)

The expansion of Xiazhuang ore field to be very promising

International Nuclear Information System (INIS)

Gong Zhigen

1993-01-01

By analyzing the regional geological characteristics and based on the law of tectonic movement matching with the ore-forming solution evolution, it is suggested that there would exist a larger NNE-trending fault structure which is considered as the third main metallogenetic belt

Bacterial leaching of pyritic gold ores

International Nuclear Information System (INIS)

Gagliardi, F.M.; Cashion, J.D.; Brown, J.; Jay, W.H.

1998-01-01

Full text: Pyritic ores (pyrite and arsenopyrite) containing gold concentrations in excess of 50g Au/t can be processed to recover the gold by the removal of the sulphur from the ore. This may be achieved by roasting (producing sulphur dioxide emissions), pressure oxidation (expensive and suitable for large high grade deposits), pressure leaching (still currently being developed) or bacterial oxidation. The bacterial oxidation process is a well known process in nature but has only recently come under investigation as a economically viable and relatively clean method of gold recovery from deep low grade sulphidic ores. Samples were obtained from the Wiluna Gold Mine in Western Australia consisting of the original ore, six successive bacterial reactors and the final products. Moessbauer experiments have been performed at room temperature, liquid nitrogen and liquid helium temperatures, and in applied magnetic fields. The main components of the iron phases which were present during the bacterial treatment were pyrite and arsenopyrite which were readily oxidised by the bacteria. Ferric sulfates and ferric arsenates were identified as by-products of the process with a small amount of the oxyhydroxide goethite. These results are in contrast to the similar study of the Fairview Mine in South Africa where principally Fe(II) species were observed

Fission track method for uranium ore exploration

International Nuclear Information System (INIS)

Guo Shilun; Deng Xinlu; Sun Shengfen; Meng Wu; Zhang Pengfa; Hao Xiuhong

1986-01-01

The uranium concentrations in natural water collected in the fields of uranium ore exploration with fission track method have been determined. It shows that the results of fission track method are consistent with that of fluoro-colorimetry and laser fluorometry for the same samples of water with uranium concentration in the region of 10 -4 to 10 -8 g/l. For water samples with lower uranium concentration (≤10 -8 g/l), the fission track method can still give accurate or referential results, but the other two methods failed. The reproducibility of fission track method was checked and discussed by using samples collected in the same fields of uranium ore exploration. The effects of the concentration of the impurities in natural water on determination of uranium concentration were analysed and discussed as well

Nanoscale Study of Clausthalite-Bearing Symplectites in Cu-Au-(U Ores: Implications for Ore Genesis

Directory of Open Access Journals (Sweden)

Nicholas D. Owen

2018-02-01

Full Text Available Symplectites comprising clausthalite (PbSe and host Cu-(Fe-sulphides (chalcocite, bornite, and chalcopyrite are instructive for constraining the genesis of Cu-Au-(U ores if adequately addressed at the nanoscale. The present study is carried out on samples representative of all three Cu-(Fe-sulphides displaying clausthalite inclusions that vary in size, from a few µm down to the nm-scale (<5 nm, as well as in morphology and inclusion density. A Transmission Electron Microscopy (TEM study was undertaken on foils prepared by Focussed Ion Beam and included atom-scale High-Angle Annular Dark-Field Scanning TEM (HAADF-STEM imaging. Emphasis is placed on phase relationships and their changes in speciation during cooling, as well as on boundaries between inclusions and host sulphide. Three species from the chalcocite group (Cu2–xS are identified as 6a digenite superstructure, monoclinic chalcocite, and djurleite. Bornite is represented by superstructures, of which 2a and 4a are discussed here, placing constraints for ore formation at T > 265 °C. A minimum temperature of 165 °C is considered for clausthalite-bearing symplectites from the relationships with antiphase boundaries in 6a digenite. The results show that alongside rods, blebs, and needle-like grains of clausthalite within the chalcocite that likely formed via exsolution, a second, overprinting set of replacement textures, extending down to the nanoscale, occurs and affects the primary symplectites. In addition, other reactions between pre-existing Se, present in solid solution within the Cu-(Fe-sulphides, and Pb, transported within a fluid phase, account for the formation of composite, commonly pore-attached PbSe and Bi-bearing nanoparticles within the chalcopyrite. The inferred reorganisation of PbSe nanoparticles into larger tetragonal superlattices represents a link between the solid solution and the symplectite formation and represents the first such example in natural materials

Ore sorting using natural gamma radiation

International Nuclear Information System (INIS)

Clark, G.J.; Dickson, B.L.; Gray, F.E.

1980-01-01

A method of sorting an ore which emits natural gamma radiation is described, comprising the steps of: (a) mining the ore, (b) placing, substantially at the mining location, the sampled or mined ore on to a moving conveyor belt, (c) measuring the natural gamma emission, water content and mass of the ore while the ore is on the conveyor belt, (d) using the gamma, water content and mass measurements to determine the ore grade, and (e) directing the ore to a location characteristic of its grade when it leaves the conveyor belt

The geologic character of nappe structure and its relation to uranium mineralization of Xiangshan ore-field in the middle of Jiangxi Province

International Nuclear Information System (INIS)

Zhou Yulong; Yang Song

2012-01-01

Started with the spatial distribution of nappe structure, the geologic features are discussed and its effect on uranium mineralization in systematically summarized for Xiangshan ore-field in the middle of Jiangxi Province. The nappe structure not only formed a 'cross-over' lithologic combination which creates a network system which can connect, transport, migrate the mineralized matter, but also formed some close or semi-close geologic setting beneath the nappe which can act as the store ore shield space for the mineralized liquid to form uranium deposit. The mineralization is concentrated at the varied place of occurrences or shape of sub-volcanic rocks and the intersection of concealed overthrust and NE strike basic fractures. (authors)

Studies on uranium ore processing

International Nuclear Information System (INIS)

Kim, C.H.; Park, S.W.; Lim, J.K.; Chung, M.K.

1981-01-01

Chemical and chemical engineering techniques of the uranium ore processing established by France COGEMA (Compagnie Generale des Matieres Nucleaires) have been comprehensively reviewed in preparation for successful test operation of the pilot plant to be completed by the end of 1981. It was found that the amount of sulfuric acid (75 Kg/t, ore) and sodium chlorate (2.5 Kg/t, ore) recommended by COGEMA should be increased up to 100 Kg/t, ore and 10 Kg/t, ore respectively to obtain satisfactory leach of uranium for some ore samples produced at the different pits of Goesan uranium mine. Conditions of the other processes such as solvent extraction, stripping, and precipitation of yellow cake were generally agreed with the results of intensive studies done by this laboratory

Legal aspects of search and mining of nuclear ores under Brazilian law

International Nuclear Information System (INIS)

Godinho, T.M.

1980-06-01

The legal aspects of mining in the Brazilian law its general principles, the basic concepts and rules established in the constitution of Brazil, in the mining code and in special laws are analysed. The rules for mining and usage of nuclear ores and other ores of interest to the nuclear field are emphasized. (A.L.) [pt

Inhalation of uranium ores

International Nuclear Information System (INIS)

Stuart, B.O.; Jackson, P.O.

1975-01-01

In previous studies the biological dispositions of individual long-lived alpha members of the uranium chain ( 238 U, 234 U and 230 Th) were determined during and following repeated inhalation exposures of rats to pitchblende (26 percent U 3 O 8 ) ore. Although finely dispersed ore in secular equilibrium was inhaled, 230 Th/ 234 U radioactivity ratios in the lungs rose from 1.0 to 2.5 during 8 weeks of exposures and increased to 9.2 by four months after cessation of exposures. Marked non-equilibrium levels were also found in the tracheobronchial lymph nodes, kidneys, liver, and femur. Daily exposures of beagle dogs to high levels of this ore for 8 days resulted in lung 230 Th/ 234 U ratios of >2.0. Daily exposures of dogs to lower levels (0.1 mg/1) for 6 months, with sacrifice 15 months later, resulted in lung and thoracic lymph node 230 Th/ 234 U ratios ranging from 3.6 to 9 and nearly 7, respectively. The lungs of hamsters exposed to carnotite (4 percent U 3 O 8 ) ore in current lifespan studies show 230 Th/ 234 U ratios as high as 2.0 during daily inhalation of this ore in secular equilibrium. Beagle dogs sacrificed after several years of daily inhalations of the same carnotite ore plus radon daughters also showed marked non-equilibrium ratios of 230 Th/ 234 U, ranging from 5.6 to 7.4 in lungs and 6.2 to 9.1 in thoracic lymph nodes. This pattern of higher retention of 230 Th than 234 U in lungs, thoracic lymph nodes, and other tissues is thus consistent for two types of uranium ore among several species and suggests a reevaluation of maximum permissible air concentrations of ore, currently based only on uranium content

Ore sorting

International Nuclear Information System (INIS)

Hawkins, A.P.; Richards, A.W.

1982-01-01

In an ore sorting apparatus, ore particles are bombarded with neutrons in a chamber and sorted by detecting radiation emitted by isotopes of elements, such as gold, forming or contained in the particles, using detectors and selectively controlling fluid jets. The isotopes can be selectively recognised by their radiation characteristics. In an alternative embodiment, shorter life isotopes are formed by neutron bombardment and detection of radiation takes place immediately adjacent the region of bombardment

Research on metallogenic conditions of intersection-type uranium ore-deposits in Zhongdong area, Northern Guangdong province

International Nuclear Information System (INIS)

Wang Zhengqi; Wu Lieqin; Zhang Guoyu

2007-12-01

The methods following as field geological investigation, trace element geo- chemistry and isotope geochemistry were used in this project. Based on geological and geochemical characteristics of Xiaoshui uranium ore deposits in Zhongdong area, Xiazhuang ore-field, Guangdong province, it could be concluded that: (1) The Provenance of Cretaceous mantle is a enriched mantle; (2) Silicified zone-type and intersection-type uranium ore are distinctness in the metallogenic period and mineralization process, and main metallogenic period of Xiaoshui uranium ore-deposit is 73.5 Ma; (3) The sources of uranium mineralization substance derived from enriched mantle; and (4)The intersection-type high grade uranium deposits were controlled by substances derived from mantle (contain with U, CO 2 , F, et al), tracks of intersection of NWW-across with NNE-trending faults and lithology of diabase. (authors)

Research on metallogenic conditions of intersection-type uranium ore-deposits in Zhongdong area, Northern Guangdong province

Energy Technology Data Exchange (ETDEWEB)

Zhengqi, Wang [East China Inst. of Technology, Fuzhou (China); [Beijing Research Inst. of Uranium Geology, Beijing (China); Lieqin, Wu [Institute No.290, CNNC, Shaoguan (China); Guoyu, Zhang [East China Inst. of Technology, Fuzhou (China)

2007-12-15

The methods following as field geological investigation, trace element geo- chemistry and isotope geochemistry were used in this project. Based on geological and geochemical characteristics of Xiaoshui uranium ore deposits in Zhongdong area, Xiazhuang ore-field, Guangdong province, it could be concluded that: (1) The Provenance of Cretaceous mantle is a enriched mantle; (2) Silicified zone-type and intersection-type uranium ore are distinctness in the metallogenic period and mineralization process, and main metallogenic period of Xiaoshui uranium ore-deposit is 73.5 Ma; (3) The sources of uranium mineralization substance derived from enriched mantle; and (4)The intersection-type high grade uranium deposits were controlled by substances derived from mantle (contain with U, CO{sub 2}, F, et al), tracks of intersection of NWW-across with NNE-trending faults and lithology of diabase. (authors)

Ore prospecting in the Iberian Pyrite Belt using seismic and potential-field data

International Nuclear Information System (INIS)

Carvalho, João; Pinto, Carlos; Sousa, Pedro; Matos, João Xavier

2011-01-01

Ore prospecting using gravimetric and magnetic data has become one of the traditional approaches used in past decades, often complemented with electric and electromagnetic methods. However, due to the problem of non-uniqueness inherent to potential-field modelling, constraints provided by structural methods such as seismic reflection are often used. During the exploration of polymetallic massive sulfide minerals in the Iberian Pyrite Belt, Figueira de Cavaleiros sector, located in the Sado Tertiary Basin, several gravimetric and magnetic anomalies were considered to be interesting targets. In order to reduce any ambiguity in the gravimetric modelling and to confirm the geological model of the area, two seismic reflection profiles were acquired. The interpretation of these profiles was assisted by three mechanical boreholes, two of which were located in the research area to make a seismostratigraphic interpretation. Unfortunately, the gravimetric modelling suggests that the anomaly has a lithological and structural origin and is not related to massive sulfides. Nevertheless, a good agreement between the seismic and potential-field data was achieved and new insights into the geological model for the region were obtained from this work, with accurate data about the Tertiary cover and Palaeozoic basement

Processing of low-grade uranium ores

International Nuclear Information System (INIS)

Michel, P.

1975-01-01

Four types of low grade ores are studied. Low grade ores which must be extracted because they are enclosed in a normal grade deposit. Heap leaching is the processing method which is largely used. It allows to obtain solutions or preconcentrates which may be delivered at the nearest plant. Normal grade ores contained in a low amplitude deposit which can be processed using leaching as far as the operation does not need any large expensive equipment. Medium grade ores in medium amplitude deposits to which a simplified conventional process can be applied using fast heap leaching. Low grade ores in large deposits. The processing possibilities leading to use in place leaching are explained. The operating conditions of the method are studied (leaching agent, preparation of the ore deposit to obtain a good tightness with regard to the hydrological system and to have a good contact between ore and reagent) [fr

The specific features of gold ore provinces of the south of Siberia in a magnetic field at ground height and heights of flight of satellite Champ.

Science.gov (United States)

Litvinova, Tamara; Petrova, Alevtina

2010-05-01

The specific features of gold ore provinces of the south of Siberia in a magnetic field at ground height and heights of flight of satellite Champ. T.Litvinova -All-Russian Geological Research Institute (VSEGEI) A. Petrova - St. Petersburg, SPbF IZMIRAN, Russian Academy of Sciences, St. Petersburg For allocation of specific features known gold ore objects (Olimpiadninskoje, Suchoi Log, etc.) is executed the morphological analysis of the magnetic field received on materials of aeromagnetic data and satellite measurements at heights of 100 and 400 km. On the ground data on a map of magnetic anomalies of Russia of scale 1:2 500000 of 50 km on the extended structures crossing known gold ore deposits and promising ore units have been constructed geomagnetic and densitys sections up to depth. On geomagnetic and densitys sections to known large gold ore to deposits are dated deep synvertical the permeable zones described by a synlenticular -layered structure. Extended horizons of not magnetic formations are located on depths about 10, 12, 15-18, 30 and 40 km. On deep densitys sections reference sites ¬ the Suchoi Log, Olimpiadninskoje and Vodorazdelnoje ¬ is characterized by zones of inversion of density. Areas of the loosened breeds are dated to synvertical to deep zones of hydrothermal and fluid study of breeds inside which the loosened lenses in intervals of depths from 2 up to 5 km are formed, 8-13 km, 18-20 and 25-30 km of 35-40 km within the limits of the bottom bark. The analysis of a magnetic field has shown, that gold mineralization in researched region is dated for zones of long-living regional explosive infringements, to permeable terrigenous to thicknesses of depressions, to adjournment depression structures in units of crossing of tectonofluid zones of diagonal orientation. Terrigenous adjournment depression structures are shown on a geomagnetic section as the powerful deflections filled with low-magnetic thicknesses. These deflections are dated to

Filtration aids in uranium ore processing

International Nuclear Information System (INIS)

Ford, H.L.; Levine, N.M.; Risdon, A.R.

1975-01-01

A process of improving the filtration efficiency and separation of uranium ore pulps obtained by carbonate leaching of uranium ore which comprises treating said ore pulps with an aqueous solution of hydroxyalkyl guar selected from the group consisting of hydroxyethyl and hydroxypropyl guar in the amount of 0.1 and 2.0 pounds of hydroxyalkyl guar per ton of uranium ore

Hydrogen Reduction of Hematite Ore Fines to Magnetite Ore Fines at Low Temperatures

Directory of Open Access Journals (Sweden)

Wenguang Du

2017-01-01

Full Text Available Surplus coke oven gases (COGs and low grade hematite ores are abundant in Shanxi, China. Our group proposes a new process that could simultaneously enrich CH4 from COG and produce separated magnetite from low grade hematite. In this work, low-temperature hydrogen reduction of hematite ore fines was performed in a fixed-bed reactor with a stirring apparatus, and a laboratory Davis magnetic tube was used for the magnetic separation of the resulting magnetite ore fines. The properties of the raw hematite ore, reduced products, and magnetic concentrate were analyzed and characterized by a chemical analysis method, X-ray diffraction, optical microscopy, and scanning electron microscopy. The experimental results indicated that, at temperatures lower than 400°C, the rate of reduction of the hematite ore fines was controlled by the interfacial reaction on the core surface. However, at temperatures higher than 450°C, the reaction was controlled by product layer diffusion. With increasing reduction temperature, the average utilization of hydrogen initially increased and tended to a constant value thereafter. The conversion of Fe2O3 in the hematite ore played an important role in the total iron recovery and grade of the concentrate. The grade of the concentrate decreased, whereas the total iron recovery increased with the increasing Fe2O3 conversion.

Sampling of ore

International Nuclear Information System (INIS)

Boehme, R.C.; Nicholas, B.L.

1987-01-01

This invention relates to a method of an apparatus for ore sampling. The method includes the steps of periodically removing a sample of the output material of a sorting machine, weighing each sample so that each is of the same weight, measuring a characteristic such as the radioactivity, magnetivity or the like of each sample, subjecting at least an equal portion of each sample to chemical analysis to determine the mineral content of the sample and comparing the characteristic measurement with desired mineral content of the chemically analysed portion of the sample to determine the characteristic/mineral ratio of the sample. The apparatus includes an ore sample collector, a deflector for deflecting a sample of ore particles from the output of an ore sorter into the collector and means for moving the deflector from a first position in which it is clear of the particle path from the sorter to a second position in which it is in the particle path at predetermined time intervals and for predetermined time periods to deflect the sample particles into the collector. The apparatus conveniently includes an ore crusher for comminuting the sample particle, a sample hopper means for weighing the hopper, a detector in the hopper for measuring a characteristic such as radioactivity, magnetivity or the like of particles in the hopper, a discharge outlet from the hopper and means for feeding the particles from the collector to the crusher and then to the hopper

Influence of acid/ore relation in the uranium-silicate ore treatment

International Nuclear Information System (INIS)

Antaki, C.; Cipriani, M.; Bruno, J.B.

1985-01-01

The estimation of acid addition effect (Kg of H 2 SO 4 /t of ore) in uranium extraction from an uranium-silicate ore, with a view to the control of silica concentration in leach under 0,6 g/l is presented. The analysis was effected based on bench-scale tests, with different quantities of sulfuric acid addition. (Author) [pt

Processing of low grade uranium ores

International Nuclear Information System (INIS)

Michel, P.

1978-10-01

Four types of low-grade ores are studied: (1) Low-grade ores that must be extracted because they are enclosed in a normal-grade deposit. Heap leaching is the processing method which is largely used. (2) Normal-grade ores contained in low-amplitude deposits. They can be processed using in-place leaching as far as the operation does not need any large and expensive equipment. (3) Medium-grade ores in medium-amplitude deposits. A simplified conventional process can be applied using fast heap leaching. (4) Low-grade ores in large deposits. The report explains processing possibilities leading in most cases to the use of in-place leaching. The operating conditions of this method are laid out, especially the selection of the leaching agents and the preparation of the ore deposit

High-rate behaviour of iron ore pellet

Science.gov (United States)

Gustafsson, Gustaf; Häggblad, Hans-Åke; Jonsén, Pär; Nishida, Masahiro

2015-09-01

Iron ore pellets are sintered, centimetre-sized spheres of ore with high iron content. Together with carbonized coal, iron ore pellets are used in the production of steel. In the transportation from the pelletizing plants to the customers, the iron ore pellets are exposed to different loading situations, resulting in degradation of strength and in some cases fragmentation. For future reliable numerical simulations of the handling and transportation of iron ore pellets, knowledge about their mechanical properties is needed. This paper describes the experimental work to investigate the dynamic mechanical properties of blast furnace iron ore pellets. To study the dynamic fracture of iron ore pellets a number of split Hopkinson pressure bar tests are carried out and analysed.

Studies on uranium ore processing

International Nuclear Information System (INIS)

Suh, I.S.; Chun, J.K.; Park, S.W.; Choi, S.J.; Lee, C.H.; Chung, M.K.; Lim, J.K.

1983-01-01

For the exploitation of domestic uranium ore deposit, comprehensive studies on uranium ore processing of the Geum-San pit ore are carried out. Physical and chemical characteristics of the Geum-San ore are similar to those of Goe-San ore and the physical beneficiation could not be applicable. Optimum operating conditions such as uranium leaching, solid-liquid separation, solvent extraction and precipitation of yellow cake are found out and the results are confirmed by the continous operation of the micro-plant with the capacity of 50Kg, ore/day. In order to improve the process of ore milling pilot plant installed recently, the feasibility of raffinate-recycle and the precipitation methods of yellow cake are intensively examined. It was suggested that the raffinate-recycle in the leaching of filtering stage could be reduced the environmental contamination and the peroxide precipitation technique was applicable to improve the purity of yellow cake. The mechanism and conditions the third phase formation are thoroughly studied and confirmed by chemical analysis of the third phase actually formed during the operation of pilot plant. The major constituents of the third phase are polyanions such as PMosub(12)Osub(40)sup(3-) or SiMosub(12)Osub(40)sup(4-). And the formation of these polyanions could be reduced by the control of redox potential and the addition of modifier. (Author)

Zeolitization at uranium ore manifestation

International Nuclear Information System (INIS)

Petrosyan, R.V.; Buntikova, A.F.

1981-01-01

The process of zeolitization at uranium ore manifestation is studied. A specific type of low-temperature wall endogenous alteration of rocks due to the effect of primary acid solution with low content of carbonic acid is established. Leaching of calcium from enclosing rocks and its deposition in ore-accompanying calcium zeolites is a characteristic feature of wall-metasomatosis. Formation of desmin- calcite-laumontite and quartz-fluoroapatite of vein associations, including ore minerals (uranophane and metaotenite), is genetically connected with calcium metasomatosis. On the basis of the connection of ore minerals with endogeneous process of zeolitization a conclusion can be made on endogenous origin of uranophane and metaotenite [ru

The overthrust structural systems and their dynamics in Xiangshan uranium ore field in central Jiangxi Province

International Nuclear Information System (INIS)

Zhou Yulong; Gao Yan; Cao Shousun; Ji Gaoping

2011-01-01

Through the comprehensive study on the exploration data of the deposits in the northern part of Xiangshan uranium ore field, the overthrust structure is recognized deeply. The overthrust structure strikes EW on the whole and the direction of movement is from south to north. The main detachment surface occurred between Sinian (Z) metamorphic rocks and Jurassic (J 3 d 1 ) layers. Sinian metamorphic basement is overthrust on the top of Lower Daguding member of Upper Jurassic Group. The nappe system consists of front faults, back thrust fault,the main detachment zone (main structure), and nappe structural window. The nappe had moved 3∼4.5 km and it mainly formed during Late Jurassic, i.e. Late Yanshan.(authors)

Studies on geneses of Lianshanguan granites and Lianshanguan uranium ore deposit

International Nuclear Information System (INIS)

Zhang Jiafu; Xu Guoqing; Wang Wenguang

1994-02-01

Based on the field work, and through the studies of thin-sections, minerals fluid inclusions, isotope geology, rare-earth elements and U-content in rocks and minerals, it is suggested that Lianshanguan granites are of magmatization genesis with multistage. The genetic model of mineralization of Lianshanguan uranium ore deposit is the magmatization-hydrothermal-filled uranium type. The role of mineralization of uranium ore deposit in that area is discussed. Furthermore, the direction of prospecting and following prospecting criteria for similar deposits in this area are also given

Ore loses and dilution of the ore vein no. 4 in the Zletovo mine, Republic of Macedonia

Directory of Open Access Journals (Sweden)

Bogatinovski Nikola L.

2017-01-01

Full Text Available Zletovo mines have a tradition of exploration and exploitation of vein lead-zinc ores for almost a century. Ore losses and dilutions have always been imperative in production since traditional old methods of mining and low-productivity mineralization are used. In conditions of classical and sub-level method excavations used, the calculated ore losses in ore vein No. 4 are 13.5%, while at the level of all excavations in the Zletovo mines dilution averages at 10%. Ore dilution is also an important technical parameter and several possible variants were calculated. When analyzing the dilution that occurs during the preparation of the sub-level corridor with parameters such: different drop angle (45-60o, constant thickness of 1.47 m as the average vein thickness in the calculated ore reserves, width of the sub-level corridor of 1.57 m or to the width of the ore vein No. 4 were added 10 cm (left and right to 5 cm as much as is taken in the calculation of the planned dilution and height of 2.5 m as suggested for this mining method, it can be noticed that the planned dilution during this method of mining ranges from 26.3% to 42.3%. In conditions of use of this underground method of excavation, parameters are selected that allow for the indicated lowering of the dilution. Namely, the thickness of the ore wire would be 1.47 m, the mining width would be 1.57 m, only 10 cm (left and right up to 5cm to the thickness of the ore vein will be added, the height difference between the consecutive levels would be 7.5 m, dip angle of 45 to 60°, and with the excavation the whole ore vein would be covered in height. On the basis of these parameters, models were prepared in which the ore vein would have a different dip angle, from which the values for the planned ore dilution ranged from 6.7 to 7.8%, which is significantly lower than the average dilution in the Zletovo Mine.

Hemimorphite Ores: A Review of Processing Technologies for Zinc Extraction

Science.gov (United States)

Chen, Ailiang; Li, Mengchun; Qian, Zhen; Ma, Yutian; Che, Jianyong; Ma, Yalin

2016-10-01

With the gradual depletion of zinc sulfide ores, exploration of zinc oxide ores is becoming more and more important. Hemimorphite is a major zinc oxide ore, attracting much attention in the field of zinc metallurgy although it is not the major zinc mineral. This paper presents a critical review of the treatment for extraction of zinc with emphasis on flotation, pyrometallurgical and hydrometallurgical methods based on the properties of hemimorphite. The three-dimensional framework structure of hemimorphite with complex linkage of its structural units lead to difficult desilicification before extracting zinc in the many metallurgical technologies. It is found that the flotation method is generally effective in enriching zinc minerals from hemimorphite ores into a high-grade concentrate for recovery of zinc. Pure zinc can be produced from hemimorphite or/and willemite with a reducing reagent, like methane or carbon. Leaching reagents, such as acid and alkali, can break the complex structure of hemimorphite to release zinc in the leached solution without generation of silica gel in the hydrometallurgical process. For optimal zinc extraction, combing flotation with pyrometallurgical or hydrometallurgical methods may be required.

Bacterial leaching of pyritic gold ores

Energy Technology Data Exchange (ETDEWEB)

Gagliardi, F.M.; Cashion, J.D.; Brown, L.J. [Monash Univ., Clayton, VIC (Australia). Dept. of Physics; Jay, W.H. [Monash Univ., Clayton, VIC (Australia). Chemical Engineering Department

1996-12-31

The bacterial oxidation process is well known in nature but has only recently come under investigation as a viable and relatively clean method of gold recovery from ores. However there is currently little information about the process at an atomic scale. It is known that the bacterial attack progresses preferentially along grain boundaries which is precisely where the gold has been deposited from aqueous infiltration. Samples have been obtained from the Wiluna mine in Western Australia consisting of the original ore, 2 pre-treatments, and from six successive bacterial reactors. {sup 57}Fe Moessbauer spectra taken at room temperature show only two quadrupole split doublets which can be ascribed to pyrite, FeS{sub 2}, and arsenopyrite, FeAsS. However, the presence of any superparamagnetic oxide or oxyhydroxide species would be expected to give a spectrum very similar to that of pyrite and would be undetectable in small quantities. At a temperature of 5K, a broad magnetically split sextet is observable with a mean hyperfine field of approximately 50T. This field is characteristic of magnetically ordered ferric iron surrounded by an octahedron of oxygens. The intensity and characteristics of this subspectrum alters through the series and interpretations will be given on the oxidation products of the bacterial leaching

Bacterial leaching of pyritic gold ores

International Nuclear Information System (INIS)

Gagliardi, F.M.; Cashion, J.D.; Brown, L.J.; Jay, W.H.

1996-01-01

The bacterial oxidation process is well known in nature but has only recently come under investigation as a viable and relatively clean method of gold recovery from ores. However there is currently little information about the process at an atomic scale. It is known that the bacterial attack progresses preferentially along grain boundaries which is precisely where the gold has been deposited from aqueous infiltration. Samples have been obtained from the Wiluna mine in Western Australia consisting of the original ore, 2 pre-treatments, and from six successive bacterial reactors. 57 Fe Moessbauer spectra taken at room temperature show only two quadrupole split doublets which can be ascribed to pyrite, FeS 2 , and arsenopyrite, FeAsS. However, the presence of any superparamagnetic oxide or oxyhydroxide species would be expected to give a spectrum very similar to that of pyrite and would be undetectable in small quantities. At a temperature of 5K, a broad magnetically split sextet is observable with a mean hyperfine field of approximately 50T. This field is characteristic of magnetically ordered ferric iron surrounded by an octahedron of oxygens. The intensity and characteristics of this subspectrum alters through the series and interpretations will be given on the oxidation products of the bacterial leaching

Study On The Choice Of Leaching System For Thanh My, Quang Nam Province Uranium Ores Treatment

International Nuclear Information System (INIS)

Than Van Lien; Nguyen Dinh Van; Tran The Dinh

2011-01-01

In order to implement the plan of peaceful uses of atomic energy, the Radioactive and Rare Earth Geology Division have been carried out the uranium ores exploitation project in Thanh My area of Quang Nam province since 2010. The treatment uranium ores samples is one of works of this project. In order to preparing for uranium ores samples treatment, the Institute for Technology of Radioactive and Rare Elements have been studied and have chosen the heap leaching method for Thanh My uranium ore treatment. The ore, which contained less than 0.07% U, was crushed to -1 cm before being placed in the heap. The acid consumption for this heap leach operation was approximately ranged 40 kg - 45 kg of H 2 SO 4 per tonne of ore, and oxidant 4 kg of MnO 2 per tonne of ore. The entire treatment cycle required 20-25 days, the recovery exceeded 80%, the leached tails contained less than 0.01% U. The experimental results were comparable with those obtained in the field scale heap leaching in the world. (author)

Microbial reduction of iron ore

Science.gov (United States)

Hoffmann, M.R.; Arnold, R.G.; Stephanopoulos, G.

1989-11-14

A process is provided for reducing iron ore by treatment with microorganisms which comprises forming an aqueous mixture of iron ore, microorganisms operable for reducing the ferric iron of the iron ore to ferrous iron, and a substrate operable as an energy source for the microbial reduction; and maintaining the aqueous mixture for a period of time and under conditions operable to effect the reduction of the ore. Preferably the microorganism is Pseudomonas sp. 200 and the reduction conducted anaerobically with a domestic wastewater as the substrate. An aqueous solution containing soluble ferrous iron can be separated from the reacted mixture, treated with a base to precipitate ferrous hydroxide which can then be recovered as a concentrated slurry. 11 figs.

FY2017 status report: Model 9975 O-ring fixture long-term leak performance

Energy Technology Data Exchange (ETDEWEB)

Daugherty, W. L. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2017-07-27

A series of experiments to monitor the aging performance of Viton® GLT and GLT-S O-rings used in the Model 9975 shipping package has been ongoing since 2004 at the Savannah River National Laboratory. One approach has been to periodically evaluate the leak performance of O-rings being aged in mock-up 9975 Primary Containment Vessels (PCVs) at elevated temperature. Other methods such as compression-stress relaxation (CSR) tests and field surveillance are also on-going to evaluate O-ring behavior. Seventy tests using PCV mock-ups with GLT O-rings were assembled and heated to temperatures ranging from 200 to 450 ºF. They were leak-tested initially and have been tested periodically to determine if they continue to meet the leak-tightness criterion defined in ANSI standard N14.5-97. Due to material substitution, a smaller test matrix with fourteen additional tests was initiated in 2008 with GLT-S O-rings heated to temperatures ranging from 200 to 400 ºF. Leak test failures have been experienced in all of the GLT O-ring fixtures aging at 350 ºF and higher temperatures, and in 8 fixtures aging at 300 ºF. The 300 °F GLT O-ring fixtures failed after 2.8 to 5.7 years at temperature. The remaining GLT O-ring fixtures aging at 300 ºF were retired from testing following more than 5 years at temperature without failure. No failures have yet been observed in GLT O-ring fixtures aging at 200 ºF for 9 to 10.5 years, or in GLT O-ring fixtures aging at 270 ºF for 5.7 years. These aging temperatures bound O-ring temperatures anticipated during normal storage in K-Area Complex (KAC). Leak test failures have been experienced in all of the GLT-S O-ring fixtures aging at 300 ºF and above. No failures have yet been observed in GLT-S O-ring fixtures aging at 200 and 250 ºF for 6.9 to 7.5 years. Data from the O-ring fixtures are generally consistent with results from compression stress relaxation testing, and provide confidence in the predictive models based on those results

Advances and Opportunities in Ore Mineralogy

Directory of Open Access Journals (Sweden)

Nigel J. Cook

2017-11-01

Full Text Available The study of ore minerals is rapidly transforming due to an explosion of new micro- and nano-analytical technologies. These advanced microbeam techniques can expose the physical and chemical character of ore minerals at ever-better spatial resolution and analytical precision. The insights that can be obtained from ten of today’s most important, or emerging, techniques and methodologies are reviewed: laser-ablation inductively-coupled plasma mass spectrometry; focussed ion beam-scanning electron microscopy; high-angle annular dark field scanning transmission electron microscopy; electron back-scatter diffraction; synchrotron X-ray fluorescence mapping; automated mineral analysis (Quantitative Evaluation of Mineralogy via Scanning Electron Microscopy and Mineral Liberation Analysis; nanoscale secondary ion mass spectrometry; atom probe tomography; radioisotope geochronology using ore minerals; and, non-traditional stable isotopes. Many of these technical advances cut across conceptual boundaries between mineralogy and geochemistry and require an in-depth knowledge of the material that is being analysed. These technological advances are accompanied by changing approaches to ore mineralogy: the increased focus on trace element distributions; the challenges offered by nanoscale characterisation; and the recognition of the critical petrogenetic information in gangue minerals, and, thus the need to for a holistic approach to the characterization of mineral assemblages. Using original examples, with an emphasis on iron oxide-copper-gold deposits, we show how increased analytical capabilities, particularly imaging and chemical mapping at the nanoscale, offer the potential to resolve outstanding questions in ore mineralogy. Broad regional or deposit-scale genetic models can be validated or refuted by careful analysis at the smallest scales of observation. As the volume of information at different scales of observation expands, the level of complexity

Idea of Identification of Copper Ore with the Use of Process Analyser Technology Sensors

Science.gov (United States)

Jurdziak, Leszek; Kaszuba, Damian; Kawalec, Witold; Król, Robert

2016-10-01

The Polish resources of the copper ore exploited by the KGHM S.A. underground mines are considered as one of the most complex in the world and - consequently - the most difficult to be processed. The ore consists of three lithology forms: dolomites, shales and sandstones but in different proportions which has a significant impact on the effectiveness of the grinding and flotation processes. The lithological composition of the ore is generally recognised in-situ but after being mined it is blended on its long way from various mining fields to the processing plant by the complex transportation system consisting of belt conveyors with numerous switching points, ore bunkers and shafts. Identification of the lithological composition of the ore being supplied to the processing plant should improve the adjustments of the ore processing machinery equipment aiming to decrease the specific processing (mainly grinding) energy consumption as well as increase the metal recovery. The novel idea of Process Analyser Technology (PAT) sensors - information carrying pellets, dropped into the transported or processed bulk material which can be read directly when needed - is investigated for various applications within the DISIRE project (a part of the SPIRE initiative, acting under the Horizon2020 framework program) and here is adopted for implementing the annotation the transported copper ore for the needs of ore processing plants control. The identification of the lithological composition of ore blended on its way to the processing plant can be achieved by an information system consisting of pellets that keep the information about the original location of the portions of conveyed ore, the digital, geological database keeping the data of in-situ lithology and the simulation models of the transportation system, necessary to evaluate the composition of the blended ore. The assumptions of the proposed solution and the plan of necessary in-situ tests (with the special respect to harsh

Microbial leaching of low grade copper ores

International Nuclear Information System (INIS)

Rauf, A.; Ashfaq, M.

1991-01-01

Biotechnology is regarded as one of the most promising and revolutionary solution to various problems which are generally faced in the extraction of metals from their ores such as high energy, capital costs and environmental pollution. The paper deals with the study of low grade copper ores for their beneficiation and extraction of copper. The ores used were chalcopyrite and oxidized copper ores. Microorganisms play a vital role in the solubilization of valuable contents from ores such as copper and other metals. Studies have been conducted on the indigenous copper ores by using thiobacillus ferro oxidans and thiobacillus thio oxidans. For comparison purpose some experiments have also been conducted by chemical leaching. The results of bacterial leaching are encouraging. (author)

Chlorine/chloride based processes for uranium ores

International Nuclear Information System (INIS)

1980-11-01

The CE Lummus Minerals Division was commissioned by The Department of Supply and Services to develop order-of-magnitude capital and operating cost estimates for chlorine/chloride-based processes for uranium ores. The processes are designed to remove substantially all radioactive consituents from the ores to render the waste products harmless. Two processes were selected, one for a typical low grade ore (2 lb. U 3 O 8 /ton ore) and one for a high grade ore (50 lbs U 3 O 8 /ton). For the low grade ore a hydrochloric acid leaching process was chosen. For high grade ore, a more complex process, including gaseous chlorination, was selected. Capital cost estimates were compiled from information obtained from vendors for the specified equipment. Building cost estimates and the piping, electrical and instrumentation costs were developed from the plant layout. Utility diagrams and mass balances were used for estimating utilities and consumables. Detailed descriptions of the bases for capital and operating cost estimates are given

A procedure for oxidation during the acid leaching of non-ferrous ores, particularly uranium ores

International Nuclear Information System (INIS)

Zubcek, L.; Baloun, S.; Martinek, K.; Vebr, Z.; Krepelka, J.; Lasica, S.

1989-01-01

It is suggested that dust from the production of ferroalloys of manganese, particularly ferrosilicomanganese and ferromanganese, can be conveniently used for oxidation during the acid leaching of non-ferrous ores, particularly uranium ores. This dust contains 30 to 40% oxides of manganese, about one-half of this is MnO 2 . Iron in the dust is present in the trivalent form, and the dust is pefectly dry. The conventional grinding of oxidants for the ore processing is eliminated, the dust being available in particle size below 0.2 mm. The dust is added in amounts of 5 to 100 kg per ton of the ore, and the suspension is typically heated at 115 degC for 3.5 hr. (P.A.)

Ore reserve estimation: a summary of principles and methods

International Nuclear Information System (INIS)

Marques, J.P.M.

1985-01-01

The mining industry has experienced substantial improvements with the increasing utilization of computerized and electronic devices throughout the last few years. In the ore reserve estimation field the main methods have undergone recent advances in order to improve their overall efficiency. This paper presents the three main groups of ore reserve estimation methods presently used worldwide: Conventional, Statistical and Geostatistical, and elaborates a detaited description and comparative analysis of each. The Conventional Methods are the oldest, less complex and most employed ones. The Geostatistical Methods are the most recent precise and more complex ones. The Statistical Methods are intermediate to the others in complexity, diffusion and chronological order. (D.J.M.) [pt

Complexing and hydrothermal ore deposition

CERN Document Server

Helgeson, Harold C

1964-01-01

Complexing and Hydrothermal Ore Deposition provides a synthesis of fact, theory, and interpretative speculation on hydrothermal ore-forming solutions. This book summarizes information and theory of the internal chemistry of aqueous electrolyte solutions accumulated in previous years. The scope of the discussion is limited to those aspects of particular interest to the geologist working on the problem of hydrothermal ore genesis. Wherever feasible, fundamental principles are reviewed. Portions of this text are devoted to calculations of specific hydrothermal equilibriums in multicompone

Ore-forming environment and ore-forming system of carbonaceous-siliceous-pelitic rock type uranium deposit in China

International Nuclear Information System (INIS)

Qi Fucheng; Zhang Zilong; Li Zhixing; He Zhongbo; Wang Wenquan

2012-01-01

It is proposed that there are four types of ore-forming systems about carbonaceous-siliceous-pelitic rock type uranium deposit in China based on systematic study on structural environment and distribution regularity of uraniferous construction of marine carbonaceous-siliceous-pelitic rock in China: continental margin rift valley ore-forming systems, continental margin rifting deep fracture zone ore-forming systems, landmass boundary borderland basin ore-forming systems and epicontinental mobile belt downfaulted aulacogen ore-forming systems. It is propounded definitely that it is controlled by margin rift valley ore-forming systems and continental margin rifting deep fracture zone ore-forming systems for large-scale uranium mineralization of carbonaceous-siliceous-pelitic rock type uranium deposit in China, which is also controlled by uraniferous marine carbonaceous-siliceous-pelitic rock construction made up of silicalite, siliceous phosphorite and carbonaceous-siliceous-pelitic rock, which settled down accompany with submarine backwash and sub marine volcanic eruption in margin rift valley and continental margin rifting mineralizing environment. Continental mar gin rift valley and continental margin rifting thermal sedimentation or exhalation sedimentation is the mechanism of forming large-scale uraniferous marine carbonaceous-siliceous-pelitic rock construction Early Palaeozoic Era in China or large-scale uranium-polymetallic mineralization. (authors)

Sedimentary carbonate-hosted giant Bayan Obo REE-Fe-Nb ore deposit of Inner Mongolia, China; a cornerstone example for giant polymetallic ore deposits of hydrothermal origin

Science.gov (United States)

Chao, E.C.T.; Back, J.M.; Minkin, J.A.; Tatsumoto, M.; Junwen, Wang; Conrad, J.E.; McKee, E.H.; Zonglin, Hou; Qingrun, Meng; Shengguang, Huang

1997-01-01

Detailed, integrative field and laboratory studies of the textures, structures, chemical characteristics, and isotopically determined ages and signatures of mineralization of the Bayan Obo deposit provided evidence for the origin and characteristics favorable for its formation and parameters necessary for defining giant polymetallic deposits of hydrothermal origin. Bayan Obo is an epigenetic, metasomatic, hydrothermal rare earth element (REE)-Fe-Nb ore deposit that is hosted in the metasedimentary H8 dolostone marble of the Middle Proterozoic Bayan Obo Group. The metasedimentary sequence was deposited on the northern continental slope of the North China craton. The mine area is about 100 km south of the suture marking Caledonian subduction of the Mongolian oceanic plate from the north beneath the North China craton. The mineralogy of the deposit is very complex, consisting of more than 120 different minerals, some of which are epigenetic minerals introduced by hydrothermal solutions, and some of which are primary and secondary metamorphic minerals. The major REE minerals are monazite and bastnaesite, whereas magnetite and hematite are the dominant Fe-ore minerals, and columbite is the most abundant Nb mineral. Dolomite, alkali amphibole, fluorite, barite, aegirine augite, apatite, phlogopite, albite, and microcline are the most widespread gangue minerals. Three general types of ores occur at Bayan Obo: disseminated, banded, and massive ores. Broad zoning of these ore types occurs in the Main and East Orebodies. Disseminated ores are in the outermost zone, banded ores are in the intermediate zone, and massive ores are in the cores of the orebodies. On the basis of field relations, host rocks, textures, structures, and mineral assemblages, many varieties of these three types of ores have been recognized and mapped. Isotopic dating of monazite, bastnaesite, aeschynite, and metamorphic and metasomatic alkali amphiboles associated with the deposit provides constraints

A new genetic interpretation for the Caotaobei uranium deposit associated with the shoshonitic volcanic rocks in the Hecaokeng ore field, southern Jiangxi, China

Directory of Open Access Journals (Sweden)

Dong-Sheng Yang

2017-03-01

Full Text Available Combined with in-situ laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS zircon UPb geochronology, published and unpublished literature on the Caotaobei uranium deposit in southern Jiangxi province, China, is re-examined to provide an improved understanding of the origin of the main ore (103 Ma. The Caotaobei deposit lies in the Hecaokeng ore field and is currently one of China's largest, volcanic-related uranium producers. Unlike commonly known volcanogenic uranium deposits throughout the world, it is spatially associated with intermediate lavas with a shoshonitic composition. Uranium mineralization (pitchblende occurs predominantly as veinlets, disseminations, and massive ores, hosted by the cryptoexplosive breccias rimming the Caotaobei crater. Zircons from one latite define four distinct 206Pb/238U age groups at 220–235 Ma (Triassic, 188 Ma (Early Jurassic, 131–137 Ma (Early Cretaceous, and 97–103 Ma (Early-Late Cretaceous transition, hereafter termed mid-Cretaceous. The integrated age (134 ± 2 Ma of Early Cretaceous zircons (group III is interpreted as representing the time of lava emplacement. The age data, together with the re-examination of literature, does not definitively support a volcanogenic origin for the generation of the deposit, which was proposed by the previous workers based mainly on the close spatial relationship and the age similarity between the main ore and volcanic lavas. Drill core and grade-control data reveal that rich concentrations of primary uranium ore are common around the granite porphyry dikes cutting the lavas, and that the cryptoexplosive breccias away from the dikes are barren or unmineralized. These observations indicate that the emplacement of the granite porphyries exerts a fundamental control on ore distribution and thus a genetic link exists between main-stage uranium mineralization and the intrusions of the dikes. Zircon overgrowths of mid-Cretaceous age (99.6�

Method of continuous pressure leaching of ores

International Nuclear Information System (INIS)

Fiala, P.; Baloun, S.; Polansky, M.

1987-01-01

Ore leaching, especially suspensions of ground ore or fine ore fractions from physical treatment was divided into two operations. The former, i.e., ore mixing with technical grade concentrated sulfuric acid proceeded in a separate mixer. The mixture was then transported into an autoclave where the actual leaching proceeded for 2 to 4 hours. The extracted mixture was discharged through the autoclave bottom. The leaching autoclave used can be without any inner structures. The separation of mixing from the actual leaching allows processing ores with high levels of clay components, increasing operating reliability of the facility, reducing consumption of special structural materials and energy, and increasing process efficiency. (E.S.)

Operational analysis of the tailings bund wall drainage system at mirny ore mining and processing enterprise

Directory of Open Access Journals (Sweden)

Aniskin Nikolay Alekseevich

2016-12-01

Full Text Available Issues of environmental safety of tailings of ore mining and processing enterprises are considered; parameters of drainage of bund walls are of great significance for the environmental safety. Description of the bund wall of Mirny ore mining and processing enterprise and the tailings filling layouts are given. Results of field observation and model study of the tailings bund wall drainage system at Mirny ore mining and processing enterprise are presented. The drainage system rebuilding project analysis was performed. Proposals for its improvement were set forward.

Eleventh interim status report: Model 9975 O-Ring fixture long-term leak performance

Energy Technology Data Exchange (ETDEWEB)

Daugherty, W. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2016-08-01

A series of experiments to monitor the aging performance of Viton® GLT O-rings used in the Model 9975 package has been ongoing since 2004 at the Savannah River National Laboratory. One approach has been to periodically evaluate the leak performance of O-rings being aged in mock-up 9975 Primary Containment Vessels (PCVs) at elevated temperature. Other methods such as compression-stress relaxation (CSR) tests and field surveillance are also on-going to evaluate O-ring behavior. Seventy tests using PCV mock-ups were assembled and heated to temperatures ranging from 200 to 450 ºF. They were leak-tested initially and have been tested periodically to determine if they continue to meet the leak-tightness criterion defined in ANSI standard N14.5-97. Due to material substitution, fourteen additional tests were initiated in 2008 with GLT-S O-rings heated to temperatures ranging from 200 to 400 ºF.

Fifth Interim Status Report: Model 9975 PCV O-Ring Fixture Long-Term Leak Performance

International Nuclear Information System (INIS)

Daugherty, W.; Hoffman, E.

2010-01-01

A series of experiments to monitor the aging performance of Viton reg. GLT O-rings used in the Model 9975 package has been ongoing for six years at the Savannah River National Laboratory. Sixty-seven mock-ups of 9975 Primary Containment Vessels (PCVs) were assembled and heated to temperatures ranging from 200 to 450 F. They were leak-tested initially and have been tested at nominal six month intervals to determine if they meet the criterion of leaktightness defined in ANSI standard N14.5-97. Fourteen additional tests were initiated in 2008 with GLT-S O-rings heated to temperatures ranging from 200 to 400 F. High temperature aging continues for 36 GLT O-ring fixtures at 200--350 F. Room temperature leak test failures have been experienced in 5 of the GLT O-ring fixtures aging at 300 and 350 F, and in all 3 of the GLT O-ring fixtures aging at higher temperatures. No failures have yet been observed in GLT O-ring fixtures aging at 200 F for 30--48 months, which is still bounding to O-ring temperatures during storage in KAMS. High temperature aging continues for 6 GLT-S O-ring fixtures at 200--300 F. Room temperature leak test failures have been experienced in all 8 of the GLT-S O-ring fixtures aging at 350 and 400 F. No failures have yet been observed in GLT-S O-ring fixtures aging at 200 or 300 F for 19 months. For O-ring fixtures that have failed the room temperature leak test and been disassembled, the O-rings displayed a compression set ranging from 51--95%. This is significantly greater than seen to date for packages inspected during KAMS field surveillance (23% average). For GLT O-rings, service life based on the room temperature leak rate criterion is comparable to that predicted by compression stress relaxation (CSR) data at higher temperatures (350--400 F). While there are no comparable failure data yet at aging temperatures below 300 F, extrapolations of the data for GLT O-rings suggests that CSR model predictions provide a conservative prediction of service

Siltation of Ore Particles in Leaching Tanks: Causative Factors and ...

African Journals Online (AJOL)

Michael

2016-12-02

Dec 2, 2016 ... In this era of low grade ores and low metal price regimes, most plants now ... factors for siltation of tanks in the Carbon-in-Leach. Plant of Gold Fields Ghana Ltd at ..... interests are in rare earth elements minerals beneficiation ...

Neutron shielding properties of boron-containing ore and epoxy composites

International Nuclear Information System (INIS)

Li Zhifu; Xue Xiangxin

2011-01-01

Using the boron-containing iron ore concentrate and boron-rich slag as studying object, the starting materials were got after the specific green ore containing boron dressing in China and blast furnace separation respectively. Monte-Carlo method was used to study the effect of the boron-containing iron ore concentrate and boron-rich slag and their composites with epoxy on the neutron shielding abilities. The reasons that affecting the shielding materials properties was discussed and the suitable proportioning of boron-containing ore to epoxy composites was confirmed; the 14.1 MeV fast neutron removal cross section and the total thermal neutron attenuation coefficient were obtained and compared with that of the common used concrete. The results show that the shielding property of 14.1 MeV fast neutron is mainly concerned with the low-Z elements in the shielding materials, the thermal neutron shielding ability is mainly concerned with boron concentrate in the composite, the attenuation of the accompany γ-ray photon is mainly concerned with the high atom number elements content in the ore and the density of the shielding material. The optimum Janume fractions of composites are in the range of 0.4-0.6 and the fast neutron shielding properties are similar to concrete while the thermal neutron shielding properties are higher than concrete. The composites are expected to be used as biological concrete shields crack injection and filling of the anomalous holes through the concrete shields around the radiation fields or directly to be prepared as shielding materials.(authors)

Sedimentary exhalative nickel-molybdenum ores in south China

Science.gov (United States)

Lott, D.A.; Coveney, R.M.; Murowchick, J.B.; Grauch, R.I.

1999-01-01

Unique bedded Ni-Mo ores hosted by black shales were discovered in localized paleobasins along the Yangzte platform of southern China in 1971. Textural evidence and radiometric dates imply ore formation during sedimentation of black shales that grade into readily combustible beds, termed stone coals, which contain 10 to 15 percent organic carbon. Studies of 427 fluid inclusions indicate extreme variation in hydrothermal brine salinities that were contained by Proterozoic dolostones underlying the ore zone in Hunan and Guizhou. Variations of fluid inclusion salinities, which range from 0.1 to 21.6 wt percent NaCl equiv, are attributed to differences in the compositions of brines in strata underlying the ore bed, complicated by the presence of seawater and dilute fluids that represent condensates of vapors generated by boiling of mineralizing fluids or Cambrian meteoric water. The complex processes of ore deposition led to scattered homogenization temperatures ranging from 100??to 187??C within the Hunan ore zone and from 65??to 183??C within the Guizhou ore zone. While living organisms probably did not directly accumulate metals in situ in sufficient amounts to explain the unusually high grades of the deposits, sulfur isotope ratios indicate that bacteria, now preserved as abundant microfossils, provided sufficient sulfide for the ores by reduction of seawater sulfate. Such microbiota may have depended on vent fluids and transported organic matter for key nutrients and are consistent with a sedex origin for the ores. Vent fluids interacted with organic remains, including rounded fragments of microbial mats that were likely transported to the site of ore deposition by the action of waves and bottom currents prior to replacement by ore minerals.

A procedure for acid leaching of ores of the sandstone type, particularly of uranium ores

International Nuclear Information System (INIS)

Fiala, P.; Baloun, S.; Hinterholzinger, O.

1990-01-01

Ore mixed with the enriched fraction of the leached ore is leached with sulfuric acid at 5 to 220 degC. Bulky particles are sorted out from the mixture and reduced in size, and particles with a higher proportion of the useful component are separated from them. The latter particles constitute the enriched fraction of the leached ore, which is partially or completely returned to the mixture with the entering ore. The sorting should preferably be performed in an aqueous system. The assets of this procedure include a better homogenization of the mixture with the acid, a better stability of the reaction mixture which brings about reduced adhesion and solidification, and the possibility of extending the reaction time and increasing the temperature. The reduction in size makes for a better access of the leaching agent to the useful minerals, and the returning of the leachate to the reaction system spares sulfuric acid. (M.D.)

Transport of Pb and Zn by carboxylate complexes in basinal ore fluids and related petroleum-field brines at 100°C: the influence of pH and oxygen fugacity

Directory of Open Access Journals (Sweden)

Giordano Thomas H

2002-09-01

Full Text Available It is well established through field observations, experiments, and chemical models that oxidation (redox state and pH exert a strong influence on the speciation of dissolved components and the solubility of minerals in hydrothermal fluids. log –pH diagrams were used to depict the influence of oxygen fugacity and pH on monocarboxylate- and dicarboxylate-transport of Pb and Zn in low-temperature (100°C hydrothermal ore fluids that are related to diagenetic processes in deep sedimentary basins, and allow a first-order comparison of Pb and Zn transport among proposed model fluids for Mississippi Valley-type (MVT and red-bed related base metal (RBRBM deposits in terms of their approximate pH and conditions. To construct these diagrams, total Pb and Zn concentrations and Pb and Zn speciation were calculated as a function of log and pH for a composite ore-brine with concentrations of major elements, total sulfur, and total carbonate that approximate the composition of MVT and RBRBM model ore fluids and modern basinal brines. In addition to acetate and malonate complexation, complexes involving the ligands Cl-, HS-, H2S, and OH- were included in the model of calculated total metal concentration and metal speciation. Also, in the model, Zn and Pb are competing with the common-rock forming metals Ca, Mg, Na, Fe, and Al for the same ligands. Calculated total Pb concentration and calculated total Zn concentration are constrained by galena and sphalerite solubility, respectively. Isopleths, in log –pH space, of the concentration of Pb and concentration of Zn in carboxylate (acetate + malonate complexes illustrate that the oxidized model fluids of T. H. Giordano (in Organic Acids in Geological Processes, ed. E. D. Pittman and M. D. Lewan, Springer-Verlag, New York, 1994, pp. 319–354 and G. M. Anderson (Econ. Geol., 1975, 70, 937–942 are capable of transporting sufficient amounts of Pb (up to 10 ppm and Zn (up to 100 ppm in the form of carboxylate

Popov form computation for matrices of Ore polynomials

DEFF Research Database (Denmark)

Khochtali, Mohamed; Né Nielsen, Johan Rosenkilde; Storjohann, Arne

2017-01-01

Let F[∂; s, d] be a ring of Ore polynomials over a field. We give a new deterministic algorithm for computing the Popov form P of a non-singular matrix A ∈ F[∂; s, d]n×n. Our main focus is to ensure controlled growth in the size of coefficients from F in the case F = k(z), and even k = Q. Our...

EXPLANATORY MODEL OF SPOT PRICE OF IRON ORE

Directory of Open Access Journals (Sweden)

Juan Enrique Villalva A.

2015-11-01

Full Text Available The objective of this study was to construct an explanatory model of the spot price of iron ore in the international market. For this, the method of multiple linear regressions was used. As a dependent variable, the spot price of iron ore (62% Fe China Tianjin port was taken, between 2010 and 2013. As independents variables were taken seven variables of international iron ore market. The resulting model includes variables: Iron ore inventory in Chinese ports, Baltic Dry Index (BDI, Iron ore exports from Brazil & Australia and Chinese Rebar Steel Price, as explanatory variables of the behavior of the spot price of iron ore in the international market. The model has an adjusted coefficient of determination R2 of 0.90, and was validated by comparing its predictions vs. known values of 2014.

The applications of microwave energy to improve grindability and extraction of gold ores

Energy Technology Data Exchange (ETDEWEB)

Huang, J.H

2000-10-01

In this study, the applications of microwave energy in gold ore processing were investigated. An investigation of microwave heating characteristics indicated that the heating rate of an ore was not only related to the applied microwave field, but also to the mineralogy of the ore. Heating rate and the difference between the bulk temperature of an ore and the local temperature of high dielectric loss minerals increased with applied microwave power level, the content of high dielectric loss minerals, the particle size of the ore and the disseminated high dielectric loss minerals. The relationship between heating rate and surrounding environment is also discussed in this study. Investigations indicated that the microwave exposure could reduce the grindability of ores. For the Lihir gold ore, a decrease of 11% in the comparative grindability was obtained when it was exposed to 1500W microwave energy for 8 minutes. The decrease in grinding resistance resulted predominantly from the fractures induced by thermal stresses and differential thermal expansion of mineral phases during microwave heating. Experimental results showed that marcasite and pyrite could be decomposed into elemental sulphur and pyrrhotite-like Fe-S phases in an inert atmosphere, or oxidised into a porous hematite (Fe{sub 2}O{sub 3}) in an air atmosphere when they were exposed to microwaves. Microwave power had a significant impact on the decomposition of pyrite and marcasite. Marcasite was more readily decomposed than pyrite at the same exposure conditions. Scanning electron microscope (SEM), optical microscope, and X-ray diffraction results indicated that the alterations during microwave treatment were complex. Some intermediate products (e.g. Fe{sub (1-x)}S) were formed before the sulphides were completely oxidised into hematite (Fe{sub 2}O{sub 3}). Oxidation developed from the surfaces into the cores of the microwaved particles. Metallic particles were also formed during microwave exposure. Lihir

The applications of microwave energy to improve grindability and extraction of gold ores

International Nuclear Information System (INIS)

Huang, J.H.

2000-10-01

In this study, the applications of microwave energy in gold ore processing were investigated. An investigation of microwave heating characteristics indicated that the heating rate of an ore was not only related to the applied microwave field, but also to the mineralogy of the ore. Heating rate and the difference between the bulk temperature of an ore and the local temperature of high dielectric loss minerals increased with applied microwave power level, the content of high dielectric loss minerals, the particle size of the ore and the disseminated high dielectric loss minerals. The relationship between heating rate and surrounding environment is also discussed in this study. Investigations indicated that the microwave exposure could reduce the grindability of ores. For the Lihir gold ore, a decrease of 11% in the comparative grindability was obtained when it was exposed to 1500W microwave energy for 8 minutes. The decrease in grinding resistance resulted predominantly from the fractures induced by thermal stresses and differential thermal expansion of mineral phases during microwave heating. Experimental results showed that marcasite and pyrite could be decomposed into elemental sulphur and pyrrhotite-like Fe-S phases in an inert atmosphere, or oxidised into a porous hematite (Fe 2 O 3 ) in an air atmosphere when they were exposed to microwaves. Microwave power had a significant impact on the decomposition of pyrite and marcasite. Marcasite was more readily decomposed than pyrite at the same exposure conditions. Scanning electron microscope (SEM), optical microscope, and X-ray diffraction results indicated that the alterations during microwave treatment were complex. Some intermediate products (e.g. Fe (1-x) S) were formed before the sulphides were completely oxidised into hematite (Fe 2 O 3 ). Oxidation developed from the surfaces into the cores of the microwaved particles. Metallic particles were also formed during microwave exposure. Lihir gold ore, in which

Uranium reduction by carbon oxide during ore formation

International Nuclear Information System (INIS)

Matyash, I.V.; Gavrusevich, I.B.; Pasal'skaya, L.F.; Shcherba, D.I.

1981-01-01

Using the method of gas chromatography the gas content in Pre-Cambrian granitoils of various types and in natrometasomatites associted with them is studied. It is established that granites associated with ore-bearing albitites have sharply elevated amounts of CO as compared with granites, which do not include mineralization. Simultaneously in ore samples the absence or sharply low amounts of CO as compared with ore-free samples is observed, that is reverse dependence of CO and ore components. Carbon oxide is the reducing agent of uranium mineralization and alongside with other reducing agents can be a geochemical barrier in the process of ore formation [ru

Introduction to ore geology

International Nuclear Information System (INIS)

Evans, A.M.

1987-01-01

This textbook on ore geology is for second and third year undergraduates and closely parallels the undergraduate course given in this subject at England's University of Leicester. The volume covers three major areas: (1) principles of ore geology, (2) examples of the most important types of ore deposits, and (3) mineralization in space and time. Many chapters have been thoroughly revised for this edition and a chapter on diamonds has been added. Chapters on greisen and pegmatite have also been added, the former in response to the changing situation in tin mining following the recent tin crisis, and the latter in response to suggestions from geologists in a number of overseas countries. Some chapters have been considerably expanded and new sections added, including disseminated gold deposits and unconformity-associated uranium deposits. The author also expands on the importance of viewing mineral deposits from an economic standpoint

Decomposition of aluminosilicate ores of Afghanistan by hydrochloric acid

International Nuclear Information System (INIS)

Mamatov, E.D.; Khomidi, A.K.

2015-01-01

Present article is devoted to decomposition of aluminosilicate ores of Afghanistan by hydrochloric acid. The physicochemical properties of initial aluminosilicate ores were studied by means of X-ray phase, differential-thermal analysis methods. The chemical and mineral composition of aluminosilicate ores was considered. The kinetics of acid decomposition of aluminosilicate ores composed of two stages was studied as well. The flowsheets of complex processing of aluminium comprising ores by means of chloric and acid methods were proposed.

The production and use of citric acid for the removal of potassium from the iron ore concentrate of the Sishen Iron Ore Mine, South Africa

Directory of Open Access Journals (Sweden)

Peter J. Williams

2010-04-01

Full Text Available The depletion of the richer iron ore worldwide has made it necessary to process lower quality iron ore. Certain substances, such as potassium, contained within the lower quality iron ore, have a detrimental effect on the smelting process during steel manufacturing. Therefore, international steel-making companies charge penalties when purchasing iron ore concentrates containing high concentrations of potassium. To date, lower quality iron ore has been blended with high quality iron ore in an attempt to alleviate the potassium concentrations in the export iron ore; however, the ratio of low quality iron ore to high quality iron ore is increasing, thereby becoming an escalating problem within the economic functioning of the Sishen Iron Ore Mine. It has, therefore, become necessary to develop an economically viable and environmentally friendly process to reduce the high potassium concentrations contained in the iron ore concentrate of the Sishen Iron Ore Mine. In this study, we compared solid substrate and submerged fermentation using Aspergillus niger for the production of citric acid, which is used for the chemical leaching of potassium from the iron ore concentrate. It was found that submerged fermentation proved to be more economical and efficient, producing a maximum citric acid concentration of 102.3 g/L in 96 h of fermentation. ‘Heap leaching’ simulation experiments were found to be uneconomical, due to the required addition of fungal growth medium every 5 days as a result of growth factor depletion within this time; however, this process removed 17.65% of the potassium from the iron ore concentrate. By contrast, chemical leaching of potassium from the iron ore concentrate proved to be most efficient when using a 1 mol citric acid leaching solution at 60 ºC, removing 23.53% of the potassium contained within the iron ore concentrate. Therefore, the most economical and efficient process for the removal of potassium from the iron

China's emergence as the world's leading iron-ore-consuming country

Science.gov (United States)

Kirk, W.S.

2004-01-01

China has become the leading iron ore consuming nation, and, based on recent steel production capacity increases and plans for more, its consumption will almost certainly to continue to grow. China's iron ore industry, however, faces a number of problems. China's iron ore is low-grade, expensive to process, and its mines are being depleted. For many Chinese steelmakers, particularly in the coastal regions, the delivered cost of domestic iron ore, is more than the delivered cost of foreign ore. Thus China's iron ore imports are expected to increase. As China's growth continues, it will almost certainly surpass Japan to become the leading iron ore importing country as well. Without China's increasing appetite for iron ore, the world iron ore market would be flat or declining. China's recent imports largely offset the slump in demand in North America and Europe. China is regarded by the iron ore industry as the growth sector for the next decade. Although Chinese imports are expected to continue their rapid increase and imports in other Asian countries are expected to continue growing, there appears to be enough greenfield and expansion projects to meet future demand for iron ore worldwide. Present suppliers of iron ore, Australia, Brazil, India, and South Africa, will probably be the chief beneficiaries of China's increasing consumption of iron ore. How long China can continue its extraordinary growth is the primary issue for the future of the iron ore industry. Based on the number and size of planned blast furnaces it appears that China's growth could continue for several more years. ?? 2004 Taylor and Francis.

Improved leaching process for metal ores

International Nuclear Information System (INIS)

Kar-Kwan Yung, K.; Barlow, C.B.; Glass, J.R.

1980-01-01

The general overall sequence of process steps in the technique of the invention in set forth. In sequence, the ore is crushed, and solubilizing reagents and moisture are added to the crushed ore in preselected controlled portions. The mixture of ore, reagent, and moisture is then cured followed in the preferred process by conditioning for filtration. The slurry that is produced from conditioning is then subjected to multiple stage washing on a belt filter. The filtrate is further processed for metal value recovery and the solids are transported to tailings disposal

Prospecting For Magnetite Ore Deposits With A Innovative Sensor's of Unique Fundamentally New Magnetometer.

Science.gov (United States)

Emelianenko, T. I.; Tachaytdinov, R. S.; Sarichev, V. F.; Kotov, B. V.; Susoeva, G. N.

After careful study of principles and abilities of all existing magnetmeters of all three revolutions in magnetic prospecting we have come to the conclusion that they cannot solve local guestions of the magnetic prospecting or determine centre coordinates of magnetite ore body before drilling Electromagnetism lows and achievents magnetprospectings and radioelectronics of all 20th century serve as a theoretical base of the "locator". While creating this cardinally new magnetmeter , we borrowed different things from radio-prospectors, magnetprospectors, wireless operators and combined all of them while creating the "locators''. The "locators' construction is bas ed on the "magnetic intensification" principle ,owing to which this "locators" are characterised by hight sensitiveness and ability to determine centers of even little commercial magnetite ore deposits with relatively weak magnetic anomalies. The main advantage of the "locators" over existing ones is that it can solve local questions determine centre coordinates. A remarkably simple locator construction determine direction of the on-surface measurings towards the ore body centre and gives approximate prognosis resourses before/withour/ drilling. The "locators" were worked out for the first time in history , they have 2 licences. The fundamental design and drawbacks of the existing magnetometers have been inherited from the original magnetometre dating back two or three hundred years. The developers of the existing magnetometres have all gone along the same well- beaten track of replacing the primitive sensor in the form of a piece of ore hung on a string at first by an arrow sensor and later by magnetically oriented protons and quanta, with amplification of the sensors' OUTPUT signal. Furthermore, all the existing magnetometres are imperfect in that they, lacking the directivity of the ground-level magnetic measurements, only record the overall magnetic vector field generated by all the ore bodies around the

Aqueous-chlorine leaching of typical Canadian uranium ores

International Nuclear Information System (INIS)

Haque, K.E.

1982-01-01

Laboratory-scale aqueous-chlorine leaches were conducted on quartz-pebble conglomerates, pegmatite and vein-type ores. Optimum leach temperatures, pulp density and retention times were determined. Uranium extraction of 98 per cent was obtained from the Elliot Lake, Madawaska Mines of Bancroft and Rabbit Lake ores, 96 per cent from the Key Lake ore and 86 per cent from the Agnew Lake ore. However, tailings containing 15-20 pCi g -1 of radium-226 were obtained only from the Elliot Lake and Agnew lake quartz-pebble conglomerates and Bancroft pegmatite-type ores by second-stage leaches with HCl. The second-stage leach results indicate that multistage (3 or 4) acid-chloride or salt-chloride leaches might be effective to obtain tailings containing 15-20 pCi 226 Ra g -1 from the high-grade vein-type ores. Comparative reagent-cost estimates show that the sulphuric-acid leach process is far less expensive than aqueous chlorine leaching. Nevertheless, only the aqueous chlorine and acid-chloride leaches in stages are effective in producing tailings containing 15-20 pCi 226 Ra g -1 from the typical Canadian uranium ores. (Auth.)

Mineralogical and paragenetical problems of the Mecsek uranium ore

International Nuclear Information System (INIS)

Vincze, J.; Fazekas, V.

1979-01-01

The latest results of the ore-mineralogical examination of the uranium ore of a deposit included in Permian sandstones in the Mecsek Mountains, southern Hungary, are presented. The phases of the minerals belonging to the uranium oxide series and their types of development, the post-coffinite nasturan pseudomorphs and the relationship between nasturan and coffinite are dealt with. Of the sulphide ore minerals associated with uranium ore mineralization the type determinant mineral is pyrite, i.e. the mineral forming their bulk and partly represented by characteristically finely aggregated ''bacteriopyrite'' and/or spherical pyrite and ''framboidal pyrite. The textural pattern of the ore mineralization is of typically matrix type. The matrix of sandstone is constituted by carbonate minerals, ''hydromicas'' and ore minerals. The matrix and, consequently, the ore minerals will corrode and consume the allothigenic detrital rockforming minerals, the feldspar, quartz-porphyry and quartz. (A.L.)

Chloride pyrometallurgy of uranium ore. 1. Chlorination of phosphate ore using solid or gas chlorinating agent and carbon

International Nuclear Information System (INIS)

Taki, Tomihiro; Komoto, Shigetoshi; Otomura, Keiichiro; Takenaka, Toshihide; Sato, Nobuaki; Fujino, Takeo.

1995-01-01

A thermodynamical and pyrometallurgical study to recover uranium from the phosphate ores was undertaken using the chloride volatilization method. Iron was chlorinated with solid chlorinating agents such as NaCl and CaCl 2 in combination with activated carbon, which will be used for removing this element from the ore, but uranium was not. On the other hand, the chlorination using Cl 2 gas and activated carbon gave a good result at 1,223 K. Not only uranium but also iron, phosphorus, aluminum and silicon were found to form volatile chlorides which vaporized out of the ore, while calcium remained in the ore as non-volatile CaCl 2 . The chlorination condition was studied as functions of temperature, reaction time and carbon content. The volatilization ratio of uranium around 95% was obtained by heating the mixture of the ore and activated carbon (35 wt%) in a mixed gas flow of Cl 2 (200 ml/min) and N 2 (200 ml/min) at 1,223 K for 120 min. (author)

User's guide for the Uranium Ore Reserve Calculation System (URAD)

International Nuclear Information System (INIS)

1988-12-01

The URAD (Uranium Reserves and Data) system consists of four computer programs designed to facilitate the evaluation of uranium ore reserves analysis and the handling of basic uranium assay data. URAD is designed specifically as a training tool for anyone unfamiliar with the methodology, data requirements, and/or general computer applications in the field of uranium ore reserves analysis. However, it can effectively be used in a 'production' environment involving considerable amounts of data. The resulting programs are written in Microsoft FORTRAN (Version 3.1) and may be run on any IBM-compatible microcomputer under DOS 2.1 (or later). Only a basic working knowledge of DOS 2.1 is needed to maintain the system and run the programs. This guide includes the overview of the URAD system, the review of sample data and a complete description of the file structure and sample type formats of the basic sample data files. Program URDAT explains the initial processing of the primary UDAT files to obtain standard output listings and gamma-log interpretations of radiometric data, and to create intermediate UDAT files which are used by the ore reserves programs - RESUV, ORSAC, and SCOR. Figs and tabs

Ore reserve estimation of uranium deposit Zirovski vrh

International Nuclear Information System (INIS)

Lukacs, E.

1979-01-01

The uranium ore deposit Zirovski vrh is in the Permian sediments of Northwest Yugoslavia. Lenticular bodies occur at several stratiform levels in grey, medium-grained sandstone. The ore deposit will be mined entirely by underground methods. It is possible to define three stages of deposit evaluation requiring different densities of exploration effort: preliminary evaluation of in situ ore reserves; evaluation of mineable ore reserves; evaluation of production capability and mine planning. The drilling density increases markedly with each succeeding stage. The optimal drilling density for all three stages of evaluation should be determined, but there is some concern that too close spaced drilling would considerably increase the exploration costs without a corresponding increase in effectiveness. On the other hand, too sparsely spaced drilling may result in some difficulties in following the ore in mining. The paper treats the problem of the density of drilling for evaluation of mineable ore reserves compared to that required for mine planning and mine production capability. The purpose of investigation of mineral raw materials is to define economic deposits (ore bodies). To evaluate the deposit economically an accurate reserve estimate is required. If it is accordingly established that such an estimate is within the degree of admissible error, the purpose of the exploration is satisfied. However, the problem as to whether the drilling grid is sufficiently dense remains, because the majority of estimates of ore reserves do not provide a measure of the reliability of the estimate. (author)

Modelling a uranium ore bioleaching process

International Nuclear Information System (INIS)

Chien, D.C.H.; Douglas, P.L.; Herman, D.H.; Marchbank, A.

1990-01-01

A dynamic simulation model for the bioleaching of uranium ore in a stope leaching process has been developed. The model incorporates design and operating conditions, reaction kinetics enhanced by Thiobacillus ferroxidans present in the leaching solution and transport properties. Model predictions agree well with experimental data with an average deviation of about ± 3%. The model is sensitive to small errors in the estimates of fragment size and ore grade. Because accurate estimates are difficult to obtain a parameter estimation approach was developed to update the value of fragment size and ore grade using on-line plant information

Geology of eastern Smith Lake ore trend, Grants mineral belt

International Nuclear Information System (INIS)

Ristorcelli, S.J.

1980-01-01

The sandstones in the Brushy Basin Member of the Morrison Formation (Jurassic) are the ore-bearing horizons of the eastern Smith Lake area. The Brushy Basin Member in this district consists of three sandstones with interbedded mudstones. Only the lower two sandstones contain ore. The sandstones are fine to coarse grained, well rounded, and arkosic, representing continental stream sediments. The lower sandstone contains rollfront ore. The redox interface is laterally extensive and well defined, extending at least 7 mi (11 km) west of the Bluewater fault zone. The ore generally occurs at the redox boundary but occasionally will be up to 1500 ft (450 m) updip. Limonitic alteration, where present, is downdip from the hematitic zone and is 100-1,500 ft (30 to 450 m) wide. The middle sandstone contains both trend ore and roll-front ore. The trend ore occurs downdip from the redox front in unoxidized ground. The redox front in the middle sand is also laterally extensive but displays a wedge shape, rather than a C shape. The clay assemblages of the two types of ore are different: the trend ore occurs in sands with the pore spaces filled with kaolinite; the roll-front ore is associated with altered illite-montmorillonite as grain coatings. Hematitic alteration is asociated with the latter. A second stage of kaolinite coats the illite-montmorillonite. Two periods of mineralization are suggested, but no absolute dates are known. The trend ore is the oldest (Jurassic) and is similar to the ore found in unoxidized ground elsewhere in the Grants region. The rollfront ore could be Laramide or post-Laramide because of its association with local Laramide structures

Computer finds ore

Science.gov (United States)

Bell, Peter M.

Artificial intelligence techniques are being used for the first time to evaluate geophysical, geochemical, and geologic data and theory in order to locate ore deposits. After several years of development, an intelligent computer code has been formulated and applied to the Mount Tolman area in Washington state. In a project funded by the United States Geological Survey and the National Science Foundation a set of computer programs, under the general title Prospector, was used successfully to locate a previously unknown ore-grade porphyry molybdenum deposit in the vicinity of Mount Tolman (Science, Sept. 3, 1982).The general area of the deposit had been known to contain exposures of porphyry mineralization. Between 1964 and 1978, exploration surveys had been run by the Bear Creek Mining Company, and later exploration was done in the area by the Amax Corporation. Some of the geophysical data and geochemical and other prospecting surveys were incorporated into the programs, and mine exploration specialists contributed to a set of rules for Prospector. The rules were encoded as ‘inference networks’ to form the ‘expert system’ on which the artificial intelligence codes were based. The molybdenum ore deposit discovered by the test is large, located subsurface, and has an areal extent of more than 18 km2.

An Effective Belt Conveyor for Underground Ore Transportation Systems

Science.gov (United States)

Krol, Robert; Kawalec, Witold; Gladysiewicz, Lech

2017-12-01

Raw material transportation generates a substantial share of costs in the mining industry. Mining companies are therefore determined to improve the effectiveness of their transportation system, focusing on solutions that increase both its energy efficiency and reliability while keeping maintenance costs low. In the underground copper ore operations in Poland’s KGHM mines vast and complex belt conveyor systems have been used for horizontal haulage of the run-of-mine ore from mining departments to shafts. Basing upon a long-time experience in the field of analysing, testing, designing and computing of belt conveyor equipment with regard to specific operational conditions, the improvements to the standard design of an underground belt conveyor for ore transportation have been proposed. As the key elements of a belt conveyor, the energy-efficient conveyor belt and optimised carrying idlers have been developed for the new generation of underground conveyors. The proposed solutions were tested individually on the specially constructed test stands in the laboratory and in the experimental belt conveyor that was built up with the use of prototype parts and commissioned for the regular ore haulage in a mining department in the KGHM underground mine “Lubin”. Its work was monitored and the recorded operational parameters (loadings, stresses and strains, energy dissipation, belt tracking) were compared with those previously collected on a reference (standard) conveyor. These in-situ measurements have proved that the proposed solutions will return with significant energy savings and lower maintenance costs. Calculations made on the basis of measurement results in the specialized belt conveyor designing software allow to estimate the possible savings if the modernized conveyors supersede the standard ones in a large belt conveying system.

The Application of Artificial Neural Networks to Ore Reserve Estimation at Choghart Iron Ore Deposit

Directory of Open Access Journals (Sweden)

Seyyed Ali Nezamolhosseini

2017-01-01

Full Text Available Geo-statistical methods for reserve estimation are difficult to use when stationary conditions are not satisfied. Artificial Neural Networks (ANNs provide an alternative to geo-statistical techniques while considerably reducing the processing time required for development and application. In this paper the ANNs was applied to the Choghart iron ore deposit in Yazd province of Iran. Initially, an optimum Multi Layer Perceptron (MLP was constructed to estimate the Fe grade within orebody using the whole ore data of the deposit. Sensitivity analysis was applied for a number of hidden layers and neurons, different types of activation functions and learning rules. Optimal architectures for iron grade estimation were 3-20-10-1. In order to improve the network performance, the deposit was divided into four homogenous zones. Subsequently, all sensitivity analyses were carried out on each zone.  Finally, a different optimum network was trained and Fe was estimated separately for each zone. Comparison of correlation coefficient (R and least mean squared error (MSE showed that the ANNs performed on four homogenous zones were far better than the nets applied to the overall ore body. Therefore, these optimized neural networks were used to estimate the distribution of iron grades and the iron resource in Choghart deposit. As a result of applying ANNs, the tonnage of ore for Choghart deposit is approximately estimated at 135.8 million tones with average grade of Fe at 56.14 percent. Results of reserve estimation using ANNs showed a good agreement with the geo-statistical methods applied to this ore body in another work.

The physical hydrogeology of ore deposits

Science.gov (United States)

Ingebritsen, Steven E.; Appold, M.S.

2012-01-01

Hydrothermal ore deposits represent a convergence of fluid flow, thermal energy, and solute flux that is hydrogeologically unusual. From the hydrogeologic perspective, hydrothermal ore deposition represents a complex coupled-flow problem—sufficiently complex that physically rigorous description of the coupled thermal (T), hydraulic (H), mechanical (M), and chemical (C) processes (THMC modeling) continues to challenge our computational ability. Though research into these coupled behaviors has found only a limited subset to be quantitatively tractable, it has yielded valuable insights into the workings of hydrothermal systems in a wide range of geologic environments including sedimentary, metamorphic, and magmatic. Examples of these insights include the quantification of likely driving mechanisms, rates and paths of fluid flow, ore-mineral precipitation mechanisms, longevity of hydrothermal systems, mechanisms by which hydrothermal fluids acquire their temperature and composition, and the controlling influence of permeability and other rock properties on hydrothermal fluid behavior. In this communication we review some of the fundamental theory needed to characterize the physical hydrogeology of hydrothermal systems and discuss how this theory has been applied in studies of Mississippi Valley-type, tabular uranium, porphyry, epithermal, and mid-ocean ridge ore-forming systems. A key limitation in the computational state-of-the-art is the inability to describe fluid flow and transport fully in the many ore systems that show evidence of repeated shear or tensional failure with associated dynamic variations in permeability. However, we discuss global-scale compilations that suggest some numerical constraints on both mean and dynamically enhanced crustal permeability. Principles of physical hydrogeology can be powerful tools for investigating hydrothermal ore formation and are becoming increasingly accessible with ongoing advances in modeling software.

Acid pre-treatment method for in situ ore leaching

International Nuclear Information System (INIS)

Mallon, R.G.; Braun, R.L.

1975-01-01

An acid leaching method is described for the recovery of a desired element from a subterranean rubblized body of primary ore containing the element and also having associated therewith a carbonate mineral wherein the rubblized ore body is flooded with an aqueous acidic solution in order to release carbon dioxide from the associated carbonate mineral. After a substantial portion of the available carbon dioxide is released and removed from the ore body, as by venting to the atmosphere, an oxidizing gas is introduced into the flooded, rubblized ore to oxidize the ore and form an acid leach solution effective in the presence of the dissolved oxidizing gas to dissolve the ore and cause the desired element to go into solution. The leach solution is then circulated to the surface where the metal values are recovered therefrom

Uranium mineralization environment and prospecting potential of Dawan ore field in Nanling metallogenic belt

International Nuclear Information System (INIS)

Yang Shanghai

2011-01-01

Located in the middle part of Jiuyishan complex pluton, Nanling metallogenic belt, Dawan uranium ore field in Hunan Province is an important uranium-producing and rare metal, nonferrous metal cluster area due to the favourable mineralization environment. The Cambrian is the main uranium source bed and their contact zone to the pluton is the favorable part for mineralization. The uranium deposits which have been explored are all located in the exocontact zone of Jinjiling pluton in the middle part of Jiuyishan complex pluton which is composed of the independent eastern and western magma evolution centers. In the west center, Jinjiling pluton is closely related to uranium mineralization where the trinity geologic setting was formed with magma evolution, hydrothermal fluid action and mineralization. The deep slitted and large faults provide the pathway and thermodynamic source for circulating migration of mineralizing fluid. The uranium mineralization mainly occurred in crustal stress conversion period of Late Cretaceous and related to the tensive NW extending fault and deep originated fluid. The gravity, aero magnetic, airborne gamma-ray spectrometry anomalies and radioactivity hydrochemical anomaly are important criteria for uranium prospecting. Based on the analysis of regional uranium mineralization environment, the prospecting potential is forecasted. (authors)

Characteristics of sandstone-type uranium mineralization and ore-controlling factors in Wukurqi ore district at southern margin of Yili basin, Xinjiang

International Nuclear Information System (INIS)

Li Xigen

2002-01-01

With the theories of hydrogenic uranium deposit in the nineties, Wukurqi ore district as a new area was found by the regional prediction and prospecting. Specially, through uranium ore prospecting of about three years, certain prospective reserves are generally controlled in the area. These reserves are hosted in V cyclothem of Middle-Lower Jurassic series, and some prospective reserves are hosted in II and VII cyclothems. By analyzing and summarizing characteristics of sandstone-type uranium mineralization and its ore-controlling factors in Wukurqi ore district, the author provides a foundation for developing further prospecting in this area

Summary of the mineralogy of the Colorado Plateau uranium ores

Science.gov (United States)

Weeks, Alice D.; Coleman, Robert Griffin; Thompson, Mary E.

1956-01-01

In the Colorado Plateau uranium has been produced chiefly from very shallow mines in carnotite ores (oxidized vanadiferous uranium ores) until recent deeper mining penetrated black unoxidized ores in water-saturated rocks and extensive exploration has discovered many deposits of low to nonvanadiferous ores. The uranium ores include a wide range from highly vanadiferous and from as much as one percent to a trace of copper, and contain a small amount of iron and traces of lead, zinc, molybdenum, cobalt, nickel, silver, manganese, and other metals. Recent investigation indicates that the carnotite ores have been derived by progressive oxidation of primary (unoxidized) black ores that contain low-valent uranium and vanadium oxides and silicates. The uranium minerals, uraninite and coffinite, are associated with coalified wood or other carbonaceous material. The vanadium minerals, chiefly montroseite, roscoelite, and other vanadium silicates, occur in the interstices of the sandstone and in siltstone and clay pellets as well as associated with fossil wood. Calcite, dolomite, barite and minor amounts of sulfides, arsenides, and selenides occur in the unoxidized ore. Partially oxidized vanadiferous ore is blue black, purplish brown, or greenish black in contrast to the black or dark gray unoxidized ore. Vanadium combines with uranium to form rauvite. The excess vanadium is present in corvusite, fernandinite, melanovanadite and many other quadrivalent and quinquevalent vanadium minerals as well as in vanadium silicates. Pyrite and part or all of the calcite are replaced by iron oxides and gypsum. In oxidized vanadiferous uranium ores the uranium is fixed in the relatively insoluble minerals carnotite and tyuyamunite, and the excess vanadium commonly combines with one or more of the following: calcium, sodium, potassium, magnesium, aluminum, iron, copper, manganese, or barium, or rarely it forms the hydrated pentoxide. The relatively stable vanadium silicates are little

Composite correlation filter for O-ring detection in stationary colored noise

Science.gov (United States)

Hassebrook, Laurence G.

2009-04-01

O-rings are regularly replaced in aircraft and if they are not replaced or if they are installed improperly, they can result in catastrophic failure of the aircraft. It is critical that the o-rings be packaged correctly to avoid mistakes made by technicians during routine maintenance. For this reason, fines may be imposed on the o-ring manufacturer if the o-rings are packaged incorrectly. That is, a single o-ring must be packaged and labeled properly. No o-rings or more than one o-ring per package is not acceptable. We present an industrial inspection system based on real-time composite correlation filtering that has successfully solved this problem in spite of opaque paper o-ring packages. We present the system design including the composite filter design.

Ore potential of basic rocks in Finland

International Nuclear Information System (INIS)

Reino, J.; Ekberg, M.; Heinonen, P.; Karppanen, T.; Hakapaeae, A.; Sandberg, E.

1993-02-01

The report is associated with a study programme on basic rocks, which has the aim to complement the preliminary site investigations on repository for TVO's (Teollisuuden Voima Oy) spent nuclear fuel. The report comprises a mining enterprise's view of the ore potential of basic plutonic rocks in Finland. The ores associated with basic plutonic rocks are globally known and constitute a significant share of the global mining industry. The ores comprise chromium, vanadium-titanium-iron, nickel-copper and platinum group element ores. The resources of the metals in question and their mining industry are examined globally. A review of the use of these metals in the industry is presented as well. General factors affecting the mining industry, such as metal prices, political conjunctures, transport facilities, environmental requirements and raw material sources for the Finnish smelters have been observed from the point of view of their future effect on exploration activity and industrial development in Finland. Information on ores and mineralizations associated with Finnish basic rocks have been compiled in the report. The file comprises 4 chromium occurrences, 8 vanadium-titanium-iron occurrences, 13 PGE occurrences and 38 nickel-copper occurrences

Testing of X-ray radiometric enrichnment of polymetallic ores

International Nuclear Information System (INIS)

Eliseev, N.I.; Panova, N.I.; Kirbitova, N.V.; Shramm, E.O.; Efremov, Yu.G.

1987-01-01

Testing of X-ray radiometric method of sorting of polymetallic ores using the developed X-ray radiometric device was conducted. It was shown that introduction of preliminary concentration at the factory made the method of fragment separation to be the perspective one, enabling to elevate the factory production with respect to commercial ore and reduce the cost of ore processing. In the case of preliminary concentration, conducted at the mine, it is advisable to perform ore sorting in the flow formed to monolayer

X-ray fluorescence separation of pure lead-zinc ores

International Nuclear Information System (INIS)

Lapshin, S.A.; Filippov, O.K.; Khachatryan, L.S.; Rudnev, B.P.

1987-01-01

To evaluate the influence of the previous concentration of polymetallic ores by the radiometric separation method on indices of flotation and gravitation enrichments, investigations were carried out using ore sample (1.94%Pb, 1.13% Zn) from a lead-zink ore deposit. It is shown that the results obtained on the enrichment of the ore and products of X-ray radiometric separation are similar. However previous removal (up to 40%) of dead rock permits to reduce sharply grinding and transpot costs

Sintering-alkaline processing of borosilicate ores of Tajikistan

International Nuclear Information System (INIS)

Nazarov, F.A.

2018-01-01

The aim of the work is to study the processes of decomposition of boron-containing ore by sintering with NaOH, finding the optimal parameters of the decomposition process, studying the kinetics of processes and developing the technological foundations for ore processing. The processes of borosilicate ore processing were studied by sintering with NaOH. Possible mechanisms of chemical reactions of the process of sintering-alkaline decomposition of boron-containing ore are established, the results of which are substantiated by physicochemical methods of analysis. A principal technological scheme for processing of borosilicate ores by a sintering-alkaline method has been developed. In the first chapter, data on alkaline and caking processes for processing boron-containing and aluminium comprising raw materials are available in the literature. Based on this, the directions of our own research are outlined. The second chapter is devoted to the study of the chemical and mineralogical compositions of borosilicate ores and their concentrates with the help of X-ray phase and chemical analysis methods, the stoichiometric calculation of the formation of aluminum, iron, and boron salts has been carried out, and a thermodynamic analysis of the processes of sintering borosilicate ores with alkali has been considered. The third chapter presents the results of a study of sintering-alkaline method of processing of initial borosilicate ore of the Ak-Arkhar Deposit and its concentrate without calcination and after calcination. The kinetics of sintering of borosilicate ores with sodium hydroxide was studied. The optimal conditions of borosilicate ore sintering before and after the preliminary calcination with alkali were determined. Optimal parameters of the sintering process have been found: sintering temperature 800-8500 deg C, duration of the process - 60 minutes, mass ratio of NaOH to raw materials 2: 1. The conditions for sintering of borosilicate concentrate with alkali have been

Multi-column bioleaching of a uranium ore

International Nuclear Information System (INIS)

Meng Yunsheng; Zheng Ying; Liu Hui; Cheng Hao

2014-01-01

The technology of bioleaching uranium ore can increase the uranium leaching rate and shorten the leaching uranium period, save consumption of acid and oxidant, lower production costs. An experiment on multi-column bioleaching of a uranium ore was done using mesophilic bacteria, the average uranium recovery of 90% was achieved in 39 days. Compared with traditional process, leaching period was shortened to 39 d from 59 d, acid consumption and liquid-solid ratio were also reduced. The results showed it is suitable to bioleach the uranium ore. (authors)

Iron from Zealandic bog iron ore -

DEFF Research Database (Denmark)

Lyngstrøm, Henriette Syrach

2011-01-01

og geologiske materiale, metallurgiske analyser og eksperimentel arkæologiske forsøg - konturerne af en jernproduktion med udgangspunkt i den sjællandske myremalm. The frequent application by archaeologists of Werner Christensen’s distribution map for the occurrence of bog iron ore in Denmark (1966...... are sketched of iron production based on bog iron ore from Zealand....

Methods of evaluating ore processing and effluent treatment for Cigar Lake ore at the Rabbit Lake Mill

International Nuclear Information System (INIS)

Edwards, C.R.

2002-01-01

Cigar Lake is the second-largest, high grade uranium orebody in the world. Mineable reserves for Cigar Lake Phase 1 are estimated at 191 million pounds U 3 O 8 with a grade of 25.6% U 3 O 8 . Subject to regulatory approval, Cameco intends to process the majority of ore from Cigar Lake in the Rabbit Lake mill. Cameco initiated a programme to study the processing of Cigar Lake ore and the treatment of the resulting waste streams. Laboratory and follow-up pilot scale ore leaching tests with Cigar Lake ore samples were performed. Tailings and effluents were generated from the products of the pilot scale leach tests. Mill process tailings were blended with ground waste rock. Using these materials, geotechnical and geochemical properties, including long term tailings pore water characteristics, will be evaluated. In addition, proposed changes to the mill waste treatment operations were developed to deal with increased levels of arsenic and radium in the waste streams. This paper describes the methods and techniques Cameco used in this programme. (author)

Experiment on bio-leaching of associated molybdenum and uranium ore

International Nuclear Information System (INIS)

Zheng Ying; Fan Baotuan; Liu Jian; Meng Yunsheng; Liu Chao

2007-01-01

Column leaching experiment results on associated molybdenum uranium ore by bacteria (T. f) are introduced. The ore are leached for 210 days using bacteria domesticated to tolerate molybdenum, the leaching of uranium is of 98% and leaching of molybdenum is of 41%. Sulphuric acid produced by bio-oxidation of sulfides in ore can meet the demand of ore leaching. (authors)

Field measurements of mixed exposure of operators to radioactive aerosol, gas and quartz in confinement of mining equipment cabs during open-pit mining of high-grade uranium ores

International Nuclear Information System (INIS)

Yoshida, K.; Atiemo, M.A.; Markham, J.W.

1982-07-01

A series of field measurements of miners mixed exposure to radon and daughters, uranium ore dust and respirable quartz, was conducted in an open-pit mine in Northern Saskatchewan during 1980-81. Control of radon gas levels in the mining equipment cabs is required. Dust may be reduced by minimizing the resuspension of dust from contaminated surfaces within the cabs

NRC's limit on intake of uranium-ore dust

International Nuclear Information System (INIS)

McGuire, S.A.

1983-04-01

In 1960 the Atomic Energy Commission adopted an interim limit on the intake by inhalation of airborne uranium-ore dust. This report culminates two decades of research aimed at establishing the adequacy of that limit. The report concludes that the AEC underestimated the time that thorium-230, a constituent of uranium-ore dust, would remain in the human lung. The AEC assumed that thorium-230 in ore dust would behave like uranium with a 120-day biological half-life in the lung. This report concludes that the biological half-life is actually on the order of 1 year. Correcting the AEC's underestimate would cause a reduction in the permitted airborne concentration of uranium-ore dust. However, another factor that cancels the need for that reduction was found. The uranium ore dust in uranium mills was found to occur with very large particle sizes (10-micron activity median aerodynamic diameter). The particles are so large that relatively few of them are deposited in the pulmonary region of the lung, where they would be subject to long-term retention. Instead they are trapped in the upper regions of the respiratory tract, subsequently swallowed, and then rapidly excreted from the body through the gastrointestinal tract. The two effects are of about the same magnitude but in opposing directions. Thus the present uranium-ore dust intake limit in NRC regulations should provide a level of protection consistent with that provided for other airborne radioactive materials. The report recalculates the limit on intake of uranium-ore dust using the derived air concentrations (DAC) from the International Commission on Radiological Protection's recent Publication 30. The report concludes that the silica contained in uranium-ore dust is a greater hazard to workers than the radiological hazard

Collective sulphide flotation of the polymetallic molybdenic ore

International Nuclear Information System (INIS)

Mazanek, C.; Maselko, J.; Rycerz, L.

1980-01-01

Results of investigations on polymetallic molybdenic ore are presented. The useful minerals of this ore are as follows: molybdenite, sphalerite, galena and chalcopyrite whereas quartz, feldspars, chlorite and sericite are barren rocks. The flotation process parameters are established i.e. the consumption of flotation reagents, the flotation time and the most advantageous grain composition of the ore submitted to flotation. Taking into consideration the established parameters, a collective sulphide flotation of ore and a control flotation of wastes were carried out. The obtained concentrate was submitted to a single cleaning flotation whereby a concentrate was obtained containing: 4,65% Mo, 2,51% Cu, 0,9% Zn, 0,69% Pb, and 1,4% Bi. (author)

Origin of ores of endogeneous uranium ore deposits

International Nuclear Information System (INIS)

Kasanskij, V.I.; Laverov, N.P.; Tugarinov, A.I.

1976-01-01

The consideration mainly includes those endogenous uranium ore deposits of which more exact data are available, such as precambrian ones in areas of proto-activated old platforms, deposits of palaeozoic fold areas, and mesozoic deposits in areas of tectonic-magnetic activation. Their genesis and typical characters are mentioned and conclusions on the general distribution of the deposits are drawn. (author)

Mining of sedimentary-type ore deposits

International Nuclear Information System (INIS)

Bruha, J.; Slovacek, T.; Berka, J.; Sadilek, P.

1992-01-01

A procedure is proposed for mining sedimentary-type ore deposits, particularly uranium deposits, using the stope-pillar technique. The stope having been mined out, the free room is filled with hydro-setting gob from the surface. A precondition for the application of this technique is horizontal ore mineralization in sediments where the total thickness of the mineralized ore layer is at least 3 to 5 m. Mining losses do not exceed 5%. For thicknesses greater than 5 m, the roof is reinforced and the walls are secured with netting. The assets of the technique include higher labor productivity of the driving, lower material demands in reinforcing and filling, lower power consumption, and reduced use of explosives. (Z.S.). 3 figs

40 CFR 440.40 - Applicability; description of the mercury ore subcategory.

Science.gov (United States)

2010-07-01

... mercury ore subcategory. 440.40 Section 440.40 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ORE MINING AND DRESSING POINT SOURCE CATEGORY Mercury Ore Subcategory § 440.40 Applicability; description of the mercury ore subcategory. The provisions of subpart D...

Iron isotope fractionation during hydrothermal ore deposition and alteration

Science.gov (United States)

Markl, Gregor; von Blanckenburg, Friedhelm; Wagner, Thomas

2006-06-01

Iron isotopes fractionate during hydrothermal processes. Therefore, the Fe isotope composition of ore-forming minerals characterizes either iron sources or fluid histories. The former potentially serves to distinguish between sedimentary, magmatic or metamorphic iron sources, and the latter allows the reconstruction of precipitation and redox processes. These processes take place during ore formation or alteration. The aim of this contribution is to investigate the suitability of this new isotope method as a probe of ore-related processes. For this purpose 51 samples of iron ores and iron mineral separates from the Schwarzwald region, southwest Germany, were analyzed for their iron isotope composition using multicollector ICP-MS. Further, the ore-forming and ore-altering processes were quantitatively modeled using reaction path calculations. The Schwarzwald mining district hosts mineralizations that formed discontinuously over almost 300 Ma of hydrothermal activity. Primary hematite, siderite and sulfides formed from mixing of meteoric fluids with deeper crustal brines. Later, these minerals were partly dissolved and oxidized, and secondary hematite, goethite and iron arsenates were precipitated. Two types of alteration products formed: (1) primary and high-temperature secondary Fe minerals formed between 120 and 300 °C, and (2) low-temperature secondary Fe minerals formed under supergene conditions (illustrates the potential of the new technique in deciphering ore formation and alteration processes. Isotope ratios are strongly dependent on and highly characteristic of fluid and precipitation histories. Therefore, they are less suitable to provide information on Fe sources. However, it will be possible to unravel the physico-chemical processes leading to the formation, dissolution and redeposition of ores in great detail.

Uranium ore deposits: geology and processing implications

International Nuclear Information System (INIS)

Belyk, C.L.

2010-01-01

There are fifteen accepted types of uranium ore deposits and at least forty subtypes readily identified around the world. Each deposit type has a unique set of geological characteristics which may also result in unique processing implications. Primary uranium production in the past decade has predominantly come from only a few of these deposit types including: unconformity, sandstone, calcrete, intrusive, breccia complex and volcanic ones. Processing implications can vary widely between and within the different geological models. Some key characteristics of uranium deposits that may have processing implications include: ore grade, uranium and gangue mineralogy, ore hardness, porosity, uranium mineral morphology and carbon content. Processing difficulties may occur as a result of one or more of these characteristics. In order to meet future uranium demand, it is imperative that innovative processing approaches and new technological advances be developed in order that many of the marginally economic traditional and uneconomic non-traditional uranium ore deposits can be exploited. (author)

Multi-Criteria selection of technology for processing ore raw materials

Science.gov (United States)

Gorbatova, E. A.; Emelianenko, E. A.; Zaretckii, M. V.

2017-10-01

The development of Computer-Aided Process Planning (CAPP) for the Ore Beneficiation process is considered. The set of parameters to define the quality of the Ore Beneficiation process is identified. The ontological model of CAPP for the Ore Beneficiation process is described. The hybrid choice method of the most appropriate variant of the Ore Beneficiation process based on the Logical Conclusion Rules and the Fuzzy Multi-Criteria Decision Making (MCDM) approach is proposed.

Separation of monazite from Rirang ore by floatation method

International Nuclear Information System (INIS)

Affandi, Kosim; Sjahminan, Mainar

1995-01-01

Separation of monazite from Rirang ore has been carried out by means of floatation using oleic acid and pine oil as promoter and frothier reagents, respectively. Several parameters affecting floatation process, i.e. grain size of the ore, pulp pH, and reagents concentration were examnined. The optimal conditions for the process include the use of -100 mesh feed ore, pulp pH 9.0 and 1 kilogram of each oleic acid and pine oil per tonne ore. Based on the conditions, monazite recovery of 90% was achieved with about 20% uranium remain in monazite concentrate. (author). 7 refs, 9tabs, 1 fig

O-Ring sealing arrangements for ultra-high vacuum systems

Science.gov (United States)

Kim, Chang-Kyo; Flaherty, Robert

1981-01-01

An all metal reusable O-ring sealing arrangement for sealing two concentric tubes in an ultra-high vacuum system. An O-ring of a heat recoverable alloy such as Nitinol is concentrically positioned between protruding sealing rings of the concentric tubes. The O-ring is installed between the tubes while in a stressed martensitic state and is made to undergo a thermally induced transformation to an austenitic state. During the transformation the O-ring expands outwardly and contracts inwardly toward a previously sized austenitic configuration, thereby sealing against the protruding sealing rings of the concentric tubes.

Automated microscopic characterization of metallic ores with image analysis: a key to improve ore processing. II: metallogenetic discriminating criteria

International Nuclear Information System (INIS)

Castroviejo, R.; Berrezueta, E.

2009-01-01

ore microscopy may furnish very important information for geo metallurgists, but todays needs for automation are difficult to meet with the optical microscope unless and adequate methodology is developed. Some limitations of the routine procedure, related to risks of mis identification caused by the spectral similarity of some ores, ask for complementary criteria. Defining ore deposit typologies and the corresponding assemblages guides the choice of species and limits the number. Comparison of the reflectance values of the ores in each mineral association defined shows that their automated identification is possible in most of the common occurrence. The number of species to be actually considered being greatly limited, performance is increased. The system is not intended to substitute for a mineralogist, but to enhance enormously his performance, while offering the industry an economic procedure to procedure a wealth of information which would not be possible with traditional methods, as the point counter. (Author) 33 refs.

The geological characteristics and forming conditions of granite type uranium-rich ore deposits

Energy Technology Data Exchange (ETDEWEB)

Tiangang, Li; Hangshou, Tong; Mingyue, Feng; Yuexiang, Li; Zhan, Xu [Beijing Research Inst. of Uranium Geology (China)

1993-03-01

The forming conditions and concentration mechanism of rich ore, criteria of ore prospecting and selection of uranium-rich ore target area are introduced in the article that is based on the studying of geological characteristics and conditions of granite type uranium-rich ore deposits of No 201 and 361 and on the comparisons of rich and poor ore deposits in geological conditions. Some new view points are also presented as the separate deposition of uranium minerals and gangue minerals is the main mechanism to form rich ore, for rich ore formation the ore enrichment by superimposition is not a universal regularity and most uranium-rich ore deposits are formed within one mineralization stage or mainly in one mineralization stage.

The geological characteristics and forming conditions of granite type uranium-rich ore deposits

International Nuclear Information System (INIS)

Li Tiangang; Tong Hangshou; Feng Mingyue; Li Yuexiang; Xu Zhan

1993-03-01

The forming conditions and concentration mechanism of rich ore, criteria of ore prospecting and selection of uranium-rich ore target area are introduced in the article that is based on the studying of geological characteristics and conditions of granite type uranium-rich ore deposits of No 201 and 361 and on the comparisons of rich and poor ore deposits in geological conditions. Some new view points are also presented as the separate deposition of uranium minerals and gangue minerals is the main mechanism to form rich ore, for rich ore formation the ore enrichment by superimposition is not a universal regularity and most uranium-rich ore deposits are formed within one mineralization stage or mainly in one mineralization stage

Uranium extraction from gold-uranium ores

Energy Technology Data Exchange (ETDEWEB)

Laskorin, B.N.; Golynko, Z.Sh.

1981-01-01

The process of uranium extraction from gold-uranium ores in the South Africa is considered. Flowsheets of reprocessing gold-uranium conglomerates, pile processing and uranium extraction from the ores are presented. Continuous counter flow ion-exchange process of uranium extraction using strong-active or weak-active resins is noted to be the most perspective and economical one. The ion-exchange uranium separation with the succeeding extraction is also the perspective one.

Breakaway frictions of dynamic O-rings in mechanical seals

Science.gov (United States)

Lai, Tom; Kay, Peter

1993-05-01

Breakaway friction of a dynamic O-ring affects the mechanical seal's response to large axial shaft movement and face wear. However, little data exist to help designers. Therefore, a test rig was developed to measure breakaway friction. The research quantitatively shows the effects of lubrication with silicone grease and a change of surface finish. By using the Taguchi statistical experimental design method, the significance of test parameters was evaluated with a minimum number of tests. It was found that fluid pressure, dwell time, and O-ring percentage squeeze affect O-ring breakaway friction more than the O-ring cross sectional diameter and axial sliding speed within the range of values tested. The authors showed that breakaway friction increased linearly with pressure. However, O-rings made of different materials had significantly different increase rates, even if they had nominally the same durometer hardness. Breakaway friction also increased with logarithm of dwell time. Again, the increase rate depended strongly on the specific O-ring material tested. These observations led the authors to believe that the typical approach of generalizing data based on generic polymer type and durometer was inappropriate.

Flocculation of chromite ore fines suspension using polysaccharide ...

Indian Academy of Sciences (India)

Unknown

liquid separation. Keywords. Flocculation; graft copolymer; mineral industry effluent; chromite ore fines; ... work well as flocculating agent on coal washery effluent, copper and iron ore fines etc (Karmakar et al 1998, 1999;. Tripathy et al 2001).

A study of the distribution of rare-metals in kuroko-type ore

International Nuclear Information System (INIS)

Murao, S.; Sie, S.H.; Suter, G.F.

1996-01-01

We have performed PIXE analysis of kuroko-type ore from the JADE hydrothermal site of the Okinawa Trough, Japan using the proton microprobe (PIXEPROBE). We analysed five kinds of ores dredged from the sea floor: (I) barite ore with small sulfide dissemination; (2) sphalerite-pyrite chimney; (3) pyrite ore; (4) sulfide veinlets in strongly altered rock; and (5) pyrite megacrystals in strongly altered rock. The analyses revealed that the trace element distribution is regulated by the occurrence mode of the ore, and within each ore, by the crystal structure. The distribution suggests that the hydrothermal system for kuroko ore formation is quite heterogeneous and its chemistry is controlled by local factors such as difference in temperature, and that in-situ PIXE analyses are essential for effective beneficiation strategy for the rare-metals from kuroko-type ore. (authors). 10 refs., 1 tab

A study of the distribution of rare-metals in kuroko-type ore

Energy Technology Data Exchange (ETDEWEB)

Murao, S. [Commonwealth Scientific and Industrial Research Organisation (CSIRO), North Ryde, NSW (Australia). Div. of Exploration Geoscience]|[Geological Survey of Japan, Tsukuba, Ibaraki (Japan); Sie, S.H.; Suter, G.F. [Commonwealth Scientific and Industrial Research Organisation (CSIRO), North Ryde, NSW (Australia). Div. of Exploration Geoscience

1996-12-31

We have performed PIXE analysis of kuroko-type ore from the JADE hydrothermal site of the Okinawa Trough, Japan using the proton microprobe (PIXEPROBE). We analysed five kinds of ores dredged from the sea floor: (I) barite ore with small sulfide dissemination; (2) sphalerite-pyrite chimney; (3) pyrite ore; (4) sulfide veinlets in strongly altered rock; and (5) pyrite megacrystals in strongly altered rock. The analyses revealed that the trace element distribution is regulated by the occurrence mode of the ore, and within each ore, by the crystal structure. The distribution suggests that the hydrothermal system for kuroko ore formation is quite heterogeneous and its chemistry is controlled by local factors such as difference in temperature, and that in-situ PIXE analyses are essential for effective beneficiation strategy for the rare-metals from kuroko-type ore. (authors). 10 refs., 1 tab.

A study of the distribution of rare-metals in kuroko-type ore

Energy Technology Data Exchange (ETDEWEB)

Murao, S [Commonwealth Scientific and Industrial Research Organisation (CSIRO), North Ryde, NSW (Australia). Div. of Exploration Geoscience; [Geological Survey of Japan, Tsukuba, Ibaraki (Japan); Sie, S H; Suter, G F [Commonwealth Scientific and Industrial Research Organisation (CSIRO), North Ryde, NSW (Australia). Div. of Exploration Geoscience

1997-12-31

We have performed PIXE analysis of kuroko-type ore from the JADE hydrothermal site of the Okinawa Trough, Japan using the proton microprobe (PIXEPROBE). We analysed five kinds of ores dredged from the sea floor: (I) barite ore with small sulfide dissemination; (2) sphalerite-pyrite chimney; (3) pyrite ore; (4) sulfide veinlets in strongly altered rock; and (5) pyrite megacrystals in strongly altered rock. The analyses revealed that the trace element distribution is regulated by the occurrence mode of the ore, and within each ore, by the crystal structure. The distribution suggests that the hydrothermal system for kuroko ore formation is quite heterogeneous and its chemistry is controlled by local factors such as difference in temperature, and that in-situ PIXE analyses are essential for effective beneficiation strategy for the rare-metals from kuroko-type ore. (authors). 10 refs., 1 tab.

Fundamentals of fast reduction of ultrafine iron ore at low temperature

Institute of Scientific and Technical Information of China (English)

Pei Zhao; Peimin Guo

2008-01-01

Fundamentals on the fast reduction of ultrafine iron ore at low temperature, including characterization of ultrafine ore, de- oxidation thermodynamics of stored-energy ultrafine ore, kinetics of iron ore deoxidation, and deoxidation mechanism, etc., and a new ironmaking process are presented in this article. Ultrafine ore concentrate with a high amount of stored energy can be produced by mechanical milling, and can be dcoxidated fast below 700℃ by either the coal-based or gas-based process. This novel process has some advantages over others: high productivity, low energy consumption, and environmental friendliness.

Automated microscopic characterization of metallic ores with image analysis: a key to improve ore processing. I: test of the methodology

International Nuclear Information System (INIS)

Berrezueta, E.; Castroviejo, R.

2007-01-01

Ore microscopy has traditionally been an important support to control ore processing, but the volume of present day processes is beyond the reach of human operators. Automation is therefore compulsory, but its development through digital image analysis, DIA, is limited by various problems, such as the similarity in reflectance values of some important ores, their anisotropism, and the performance of instruments and methods. The results presented show that automated identification and quantification by DIA are possible through multiband (RGB) determinations with a research 3CCD video camera on reflected light microscope. These results were obtained by systematic measurement of selected ores accounting for most of the industrial applications. Polarized light is avoided, so the effects of anisotropism can be neglected. Quality control at various stages and statistical analysis are important, as is the application of complementary criteria (e.g. metallogenetic). The sequential methodology is described and shown through practical examples. (Author)

Uranium accompanying recovery from copper ores

International Nuclear Information System (INIS)

Golynko, Z.Sh.; Laskorin, B.N.

1981-01-01

In the search for new raw material sources for nuclear power engineering a review of the technique of uranium accompaning recovery from copper ores reprocessing products in some countries is presented. In the USA a sorption method of uranium extraction by means of strongly basic ion exchange resins from solutions upon copper case- hardening with subsequent extraction from eluates by solutions of tertiary amines is realized. Elution is realized with sulphuric acid. In South Africa an extraction reprocessing of gravitational concentrate extracted from copper sulphide flotation tailings is organized. In India the uranium extraction from copper ores flotation enrichment tailings is organized on a commerical scale. Presented are data on the scale of uranium recovery, various conditions of its recovery as well as block diagrams of the processes. It is shown that copper ores become an additional source of uranium recovery [ru

Research on degradation of vacuum O-rings under gamma radiation

CERN Document Server

Ino, H; Saitô, Y; Kubo, T; Kinsho, M

2003-01-01

The high-intensity proton accelerator being constructed by JAERI and KEK will generates greater beam power than conventional accelerators. The radiation emission due to beam losses will therefore increase. Since vacuum O-rings installed in the accelerator will be degraded badly by the radiation, there is need to find an O-ring that has more resistant to radiation. To find an O-ring that has better radiation resistant than that of the fluororubber used for conventional accelerators in general, some O-rings which are expected to have enough resistant to the radiation were irradiated, and estimated a degradation by measurement of outgassing rate, hardness, permeation time of helium gas, and an outward observation. Most of the O-rings were irradiated in an oxygen free atmosphere and in the air. The irradiations were carried out at room temperature in Co-60 gamma irradiation facility until a dose of 1 MGy was reached. The radiation resistance of PURE-RUBBER O-ring showed somewhat better than that of the fluororubb...

Manual on laboratory testing for uranium ore processing

International Nuclear Information System (INIS)

1990-01-01

Laboratory testing of uranium ores is an essential step in the economic evaluation of uranium occurrences and in the development of a project for the production of uranium concentrates. Although these tests represent only a small proportion of the total cost of a project, their proper planning, execution and interpretation are of crucial importance. The main purposes of this manual are to discuss the objectives of metallurgical laboratory ore testing, to show the specific role of these tests in the development of a project, and to provide practical instructions for performing the tests and for interpreting their results. Guidelines on the design of a metallurgical laboratory, on the equipment required to perform the tests and on laboratory safety are also given. This manual is part of a series of Technical Reports on uranium ore processing being prepared by the IAEA's Division of Nuclear Fuel Cycle and Waste Management. A report on the Significance of Mineralogy in the Development of Flowsheets for Processing Uranium Ores (Technical Reports Series No. 196, 1980) and an instruction manual on Methods for the Estimation of Uranium Ore Reserves (No. 255, 1985) have already been published. 17 refs, 40 figs, 17 tabs

Uranium abundance in some sudanese phosphate ores

International Nuclear Information System (INIS)

Adam, A.A.; Eltayeb, M.A.H.

2009-01-01

This work was carried out mainly to analysis of some Sudanese phosphate ores, for their uranium abundance and total phosphorus content measured as P 2 O 5 %. For this purpose, 30 samples of two types of phosphate ore from Eastern Nuba Mountains, in Sudan namely, Kurun and Uro areas were examined. In addition, the relationship between uranium and major, and trace elements were obtained, also, the natural radioactivity of the phosphate samples was measured, in order to characterize and differentiate between the two types of phosphate ores. The uranium abundance in Uro phosphate with 20.3% P 2 O 5 is five time higher than in Kurun phosphate with 26.7% P 2 O 5 . The average of uranium content was found to be 56.6 and 310 mg/kg for Kurun and Uro phosphate ore, respectively. The main elements in Kurun and Uro phosphate ore are silicon, aluminum, and phosphorus, while the most abundant trace elements in these two ores are titanium, strontium and barium. Pearson correlation coefficient revealed that uranium in Kurun phosphate shows strong positive correlation with P 2 O 5 , and its distribution is essentially controlled by the variations of P2O5 concentration, whereas uranium in Uro phosphate shows strong positive correlation with strontium, and its distribution is controlled by the variations of Sr concentration. Uranium behaves in different ways in Kurun phosphate and in Uro phosphate. Uro phosphate shows higher concentrations of all the estimated radionuclides than Kurun phosphate. According to the obtained results, it can be concluded that Uro phosphate is consider as secondary uranium source, and is more suitable for uranium recovery, because it has high uranium abundance and low P 2 O 5 %, than Kurun phosphate. (authors) [es

Natural resources sustainability: iron ore mining

International Nuclear Information System (INIS)

De La Torre de Palacios, Luis

2011-01-01

In the present article, a new tool to determine environmental sustainability, the energy impact index (EII) was developed to classify different iron mine projects according to two main parameters including energy consumption and CO 2 emissions. The EII considers the characteristics of the mineral (such as the quality, size, hardness, iron ore grade, reducibility, mineral/waste rate, and type of deposit), mining processes (type of exploitation, ore processing, available technology), and transportation (distance to cover).

Determination of gold in gold ores

International Nuclear Information System (INIS)

Keedy, C.R.; Parson, L.; Shen, J.

1989-01-01

The gold content of placer gold flakes and gold bearing ores was determined by instrumental and radiochemical neutron activation analysis, respectively. It was discovered that significant errors result in the instrumental method for gold flakes as small as 10 mg due to sample self-absorption of neutrons during irradiation. Reliable results were obtained for both ore samples and gold flakes by dissolving the samples in aqua regia prior to irradiation. (author) 7 refs.; 3 tabs

PROCESS OF RECOVERING URANIUM FROM ITS ORES

Science.gov (United States)

Galvanek, P. Jr.

1959-02-24

A process is presented for recovering uranium from its ores. The crushed ore is mixed with 5 to 10% of sulfuric acid and added water to about 5 to 30% of the weight of the ore. This pugged material is cured for 2 to 3 hours at 100 to 110 deg C and then cooled. The cooled mass is nitrate-conditioned by mixing with a solution equivalent to 35 pounds of ammunium nitrate and 300 pounds of water per ton of ore. The resulting pulp containing 70% or more solids is treated by upflow percolation with a 5% solution of tributyl phosphate in kerosene at a rate equivalent to a residence time of about one hour to extract the solubilized uranium. The uranium is recovered from the pregnant organic liquid by counter-current washing with water. The organic extractant may be recycled. The uranium is removed from the water solution by treating with ammonia to precipitate ammonium diuranate. The filtrate from the last step may be recycled for the nitrate-conditioning treatment.

40 CFR 440.20 - Applicability; description of the aluminum ore subcategory.

Science.gov (United States)

2010-07-01

... subpart B are applicable to discharges from facilities engaged in the mining of bauxite as an aluminum ore. ... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ORE MINING AND DRESSING POINT SOURCE CATEGORY Aluminum Ore...

Laser-induced breakdown spectroscopy measurements of uranium and thorium powders and uranium ore

Energy Technology Data Exchange (ETDEWEB)

Judge, Elizabeth J. [Chemistry Division, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Barefield, James E., E-mail: jbarefield@lanl.gov [Chemistry Division, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Berg, John M. [Manufacturing Engineering and Technology Division, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Clegg, Samuel M.; Havrilla, George J.; Montoya, Velma M.; Le, Loan A.; Lopez, Leon N. [Chemistry Division, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States)

2013-05-01

Laser-induced breakdown spectroscopy (LIBS) was used to analyze depleted uranium and thorium oxide powders and uranium ore as a potential rapid in situ analysis technique in nuclear production facilities, environmental sampling, and in-field forensic applications. Material such as pressed pellets and metals, has been extensively studied using LIBS due to the high density of the material and more stable laser-induced plasma formation. Powders, on the other hand, are difficult to analyze using LIBS since ejection and removal of the powder occur in the laser interaction region. The capability of analyzing powders is important in allowing for rapid analysis of suspicious materials, environmental samples, or trace contamination on surfaces since it most closely represents field samples (soil, small particles, debris etc.). The rapid, in situ analysis of samples, including nuclear materials, also reduces costs in sample collection, transportation, sample preparation, and analysis time. Here we demonstrate the detection of actinides in oxide powders and within a uranium ore sample as both pressed pellets and powders on carbon adhesive discs for spectral comparison. The acquired LIBS spectra for both forms of the samples differ in overall intensity but yield a similar distribution of atomic emission spectral lines. - Highlights: • LIBS analysis of mixed actinide samples: depleted uranium oxide and thorium oxide • LIBS analysis of actinide samples in powder form on carbon adhesive discs • Detection of uranium in a complex matrix (uranium ore) as a precursor to analyzing uranium in environmental samples.

Radiometric sorting of Rio Algom uranium ore

International Nuclear Information System (INIS)

Cristovici, M.A.

1983-11-01

An ore sample of about 0.2 percent uranium from Quirke Mine was subjected to radiometric sorting by Ore Sorters Limited. Approximately 60 percent of the sample weight fell within the sortable size range: -150 + 25 mm. Rejects of low uranium content ( 2 (2 counts/in 2 ) but only 7.6 percent of the ore, by weight, was discarded. At 0.8-0.9 counts/cm 2 (5-6 counts/in 2 ) a significant amount of rejects was removed (> 25 percent) but the uranium loss was unacceptably high (7.7 percent). Continuation of the testwork to improve the results is proposed by trying to extend the sortable size range and to reduce the amount of fines during crushing

New age radiometric ore sorting - the elegant solution

International Nuclear Information System (INIS)

Gordon, H.P.; Heuer, T.

2000-01-01

Radiometric ore sorting technology and application are described in two parts. Part I reviews the history of radiometric sorting in the minerals industry and describes the latest developments in radiometric sorting technology. Part II describes the history, feasibility study and approach used in the application of the new technology at Rossing Uranium Limited. There has been little progress in the field of radiometric sorting since the late 1970s. This has changed with the development of a high capacity radiometric sorter designed to operate on low-grade ore in the +75mm / -300mm size fraction. This has been designed specifically for an application at Rossing. Rossing has a long history in radiometric sorting dating back to 1968 when initial tests were conducted on the Rossing prospect. Past feasibility studies concluded that radiometric sorting would not conclusively reduce the unit cost of production unless sorting was used to increase production levels. The current feasibility study shows that the application of new radiometric sorter technology makes sorting viable without increasing production, and significantly more attractive with increased production. A pilot approach to confirm sorter performance is described. (author)

Radiation resistance of elastomeric O-rings in mixed neutron and gamma fields: Testing methodology and experimental results

Science.gov (United States)

Zenoni, A.; Bignotti, F.; Donzella, A.; Donzella, G.; Ferrari, M.; Pandini, S.; Andrighetto, A.; Ballan, M.; Corradetti, S.; Manzolaro, M.; Monetti, A.; Rossignoli, M.; Scarpa, D.; Alloni, D.; Prata, M.; Salvini, A.; Zelaschi, F.

2017-11-01

Materials and components employed in the presence of intense neutron and gamma fields are expected to absorb high dose levels that may induce deep modifications of their physical and mechanical properties, possibly causing loss of their function. A protocol for irradiating elastomeric materials in reactor mixed neutron and gamma fields and for testing the evolution of their main mechanical and physical properties with absorbed dose has been developed. Four elastomeric compounds used for vacuum O-rings, one fluoroelastomer polymer (FPM) based and three ethylene propylene diene monomer rubber (EPDM) based, presently available on the market have been selected for the test. One EPDM is rated as radiation resistant in gamma fields, while the other elastomers are general purpose products. Particular care has been devoted to dosimetry calculations, since absorbed dose in neutron fields, unlike pure gamma fields, is strongly dependent on the material composition and, in particular, on the hydrogen content. The products have been tested up to about 2 MGy absorbed dose. The FPM based elastomer, in spite of its lower dose absorption in fast neutron fields, features the largest variations of properties, with a dramatic increase in stiffness and brittleness. Out of the three EPDM based compounds, one shows large and rapid changes in the main mechanical properties, whereas the other two feature more stable behaviors. The performance of the EPDM rated as radiation resistant in pure gamma fields does not appear significantly better than that of the standard product. The predictive capability of the accelerated irradiation tests performed as well as the applicable concepts of threshold of radiation damage is discussed in view of the use of the examined products in the selective production of exotic species facility, now under construction at the Legnaro National Laboratories of the Italian Istituto Nazionale di Fisica Nucleare. It results that a careful account of dose rate effects

The genesis of ores

International Nuclear Information System (INIS)

Brimhall, G.

1991-01-01

Human history and technology have been shaped by metals. How did they become concentrated in minable deposits located so conveniently near the earth's surface? The author explains the mechanisms of fluid transport-by magma, water and even air and wind-responsible for the chemical and physical interactions that created bodies of metallic ores throughout geologic history. From their formation to their modification at the surface of the earth, ore deposits are geologically transitory and reflect dynamic processes within the earth as well as atmospheric and climatic influences on hydrologic systems. As highly reactive supracrustal systems, they then serve as geochemical sensors providing a powerful record and set of tracer elements for deducing the history, transport paths and forces operative in the crust

Geochemistry and ore prospecting

International Nuclear Information System (INIS)

Le Caignec, R.

1954-01-01

Applied geochemistry is a new technique which helps the geologist in detecting ore deposits. Some deposits, even when they are covered with rather thick surface structures, form around these zones where the infinitesimal content of some elements of soils or waters is notably different. These 'anomalies' may be contemporaneous to the deposit-structure (primary dispersion) or may have occurred later (secondary dispersion). Various factors rule these anomalies: ore-stability, soil homogeneity, water conditions, topography, vegetation, etc... Applied geochemistry is in fact the study of analysis techniques of metal traces in soils as well as the geological interpretation of observed anomalies. This report gives practical data on sampling methods, yields, costs and also on special problems of uranium geochemistry. (author) [fr

Ore horizons, ore facies, mineralogy and geochemistry of volconogenic massive sulfide (VMS deposits of the Varandan Ba-Pb-Cu deposit, southwest of Qamsar - Iran

Directory of Open Access Journals (Sweden)

Fayeq Hashemi

2017-11-01

Full Text Available Introduction The Varandan Ba-Pb-Cu deposits are located15 km southwest of the town of Qamsar and approximately 7 km south west of the Qazaan village, in the Urumieh- Dokhtar magmatic arc. The Kashan region that is situated in west-central Iran hosts several barite-base metal deposits and occurrences, the biggest ones are the Varandan Ba-Pb-Cu (case considered in this study and the Tapeh-Sorkh (Khalajmaasomi et al., 2010 and Dorreh Ba (Nazari, 1994 deposits. Previous researchers (Izadi, 1996; Farokhpey et al., 2010 have proposed an epithermal model for formation of the Varandan deposit. However, based on some feature of the deposit, it seems that this genetic model may not be correct. Therefore, it is necessary to do more precise research studies on the deposit. The main purpose of this paper is to discuss the genesis of the Varandan deposit based on geological, ore facies, mineralogy, wall rock alterations, and geochemical studies. Materials and methods A field study and sampling was performed during the summer of 2013. To assess the geochemical characteristics of the deposit, about 17 systematic samples from different ore facies of the first, second and third sub-horizon were collected for petrography and mineralogy, and for inductively coupled plasma-atomic emission spectroscopy(ICP-AES, X-ray diffraction (XRD and X-ray fluorescence (XRF geochemical analysis methods. The microscopic studies were done in the optics laboratory of the Shahrood University, and the geochemical analyzes were conducted in laboratories of the Center of Research and Mineral Processing Ore Minerals of Iran, Karaj, Iran. Results The host sequence in the Varandan deposit involves three units, from bottom to top: Unit1: grey, green siliceous tuff, brecciated tuff, crystal tuff and andesite; Unit2: white grey nummulitic limestone, limy tuff and marl: and Unit3: tuff breccia and crystal lithic tuff. Mineralization in the Varandan deposit has occurred as four ore sub

Ore-concentrating structures with telescoped uranium mineralization

International Nuclear Information System (INIS)

Shchetochkin, V.N.; Dmitriyev, V.I.; Tkachenko, I.I.

1986-01-01

Deep faults are the main controlling elements in uranium ore fields, although the immediate geologic environments may be quite varied. Within the fault zones, the uranium fields are usually associated with areas where major transverse and diagonal faults intersect or link, and with points of splitting or change in strike in disjunctive zones. Another distinctive feature of the mineralized structure is their long history, with a combination of tectonic elements differing in age and type, usually associated with retrograde dislocation metamorphism. The specific features of these structures control the uranium mineralization, which is usually localized in foci with telescoped tectonic, magmatic, hydrothermal, metasomatic, and sometimes exogenous processes. The unnamed area (in the Ukraine?) furnishes a good example of how successive stages of a complex geologic history affect the occurrence of such a highly mobile element as uranium. 12 references, 4 figures

Status Report from Czechoslovakia [Processing of Low-Grade Uranium Ores

Energy Technology Data Exchange (ETDEWEB)

Civin, V; Belsky, M [Research and Development Laboratory No.3 of the Uranium Industry, Prague, Czechoslovakia (Czech Republic)

1967-06-15

The present paper deals with the fundamental problems and the main routes followed in processing low-grade uranium ores in CSSR. In this connection it may be useful to discuss the definition of low-grade ore. In our country this term is applied to uraniferous material with a very low content of uranium (of the order of 0.01%) whose treatment causes no particular difficulty. However, the same term is also used to designate those materials whose processibility lies on the verge of economic profitability. In our view, this classification, of an ore using two independent criteria (i.e. uranium content and processing economy) is useful from the standpoint of technology. The treatment of both such ore types is as a rule carried out by specific technological processes. Consequently, low-grade uranium ores can be divided into two groups: (1) Ores with a low uranium content. To this category belong in our country uraniferous materials which originate as a by-product of technological processes used in processing other materials. This is primarily gangue and tailings of various physical or physico-chemical pretreatment operations to which the ore is subjected at the mining site. Mention should be made in this connection of mine waters, which represent a useful complementary source of uranium despite their low uranium content (of the order of milligrams per litre). (2) Ores whose economical treatment is problematic. To this category belong deposits of conventional ore types with a uranium content on the limit of profitable treatment. Also, those deposits containing atypical materials possessing such properties which impair the economy of their treatment. This includes ores with a considerable amount of components which are difficult to separate and which at the same time consume the leaching agents. Finally, it covers uranium-bearing materials in refractory forms which are difficult to dissolve and also some special materials, such as lignites, uranium-bearing shales, loams

Uranium ore processing minimizing reagent losses

International Nuclear Information System (INIS)

Shaogiang, Chen; Moret, J.; Lyaudet, G.

1989-01-01

The uranium ore is treated by sodium carbonates and the solution is divided in two parts: a production solution which is decarbonated by an acid before uranium precipitation with sodium hydroxide and a recycling solution directly treated by sodium hydroxide for precipitation of about 85% of uranium and total transformation of sodium bicarbonate into sodium carbonate, the quantity of sodium hydroxide used on the recycling solution brings sodium ions required for attack of the ore [fr

Hydrogen Plasma Processing of Iron Ore

Science.gov (United States)

Sabat, Kali Charan; Murphy, Anthony B.

2017-06-01

Iron is currently produced by carbothermic reduction of oxide ores. This is a multiple-stage process that requires large-scale equipment and high capital investment, and produces large amounts of CO2. An alternative to carbothermic reduction is reduction using a hydrogen plasma, which comprises vibrationally excited molecular, atomic, and ionic states of hydrogen, all of which can reduce iron oxides, even at low temperatures. Besides the thermodynamic and kinetic advantages of a hydrogen plasma, the byproduct of the reaction is water, which does not pose any environmental problems. A review of the theory and practice of iron ore reduction using a hydrogen plasma is presented. The thermodynamic and kinetic aspects are considered, with molecular, atomic and ionic hydrogen considered separately. The importance of vibrationally excited hydrogen molecules in overcoming the activation energy barriers, and in transferring energy to the iron oxide, is emphasized. Both thermal and nonthermal plasmas are considered. The thermophysical properties of hydrogen and argon-hydrogen plasmas are discussed, and their influence on the constriction and flow in the of arc plasmas is considered. The published R&D on hydrogen plasma reduction of iron oxide is reviewed, with both the reduction of molten iron ore and in-flight reduction of iron ore particles being considered. Finally, the technical and economic feasibility of the process are discussed. It is shown that hydrogen plasma processing requires less energy than carbothermic reduction, mainly because pelletization, sintering, and cokemaking are not required. Moreover, the formation of the greenhouse gas CO2 as a byproduct is avoided. In-flight reduction has the potential for a throughput at least equivalent to the blast furnace process. It is concluded that hydrogen plasma reduction of iron ore is a potentially attractive alternative to standard methods.

Determination of the oxidizing capacity of manganese ores.

Science.gov (United States)

Prasad, R

1974-09-01

An accurate method is described for determining the amount of active oxygen in manganese ores, based on the oxidation-reduction reaction between the ore and arsenic(III) in presence of ammonium molybdate, followed by the back-titration of excess of arsenic(III) with cerium(IV), using osmium tetroxide as catalyst and Disulphine Blue V as indicator. A survey has been made of the applicability of this method to various pyrolusite ores containing less than 0.2% phosphorus. Aluminium(III), copper(II), iron(III), manganese(II), and molybdenum(VI) do not interfere. Up to 30% phosphorus(V) causes no interference.

The potential for ore and industrial minerals in the Forsmark area

Energy Technology Data Exchange (ETDEWEB)

Lindroos, Hardy [MIRAB Mineral Resurser AB, Uppsala (Sweden); Isaksson, Hans; Thunehed, Hans [GeoVista AB, Luleaa (Sweden)

2004-03-01

A survey has been made of existing information concerning the potential for ore and industrial minerals in and near the candidate area for a deep repository in Forsmark. A deep repository for spent nuclear fuel should not be located in a rock type or an area where mineral extraction might be considered in the future, since this would make it impossible to exploit this natural resource. Avoiding such areas reduces the risk that people in the future will come into contact with the deep repository through mineral prospecting or mining activities. The survey has made use of all the geoscientific information that was compiled in the more regional investigations in Oesthammar Municipality in 1996-97. In cooperation with the Geological Survey of Sweden (SGU), a new, more detailed mineral resources map has been prepared. The map shows areas with an ore potential that may be unsuitable or unfavourable for siting of a deep repository. The results of the recently completed geophysical helicopter surveys of the Forsmark area are presented in a special chapter. The judgement of the area's ore potential is in part based on the geophysical evaluation of these measurements. Furthermore, the survey obtained information from ongoing deep drillings from the site investigation in Forsmark. In order to better be able to judge the ore potential, the survey has initiated a geochemical investigation of activated soil samples, plus an ore geology sampling of a section in the deep borehole KFM02A, where a hydrothermally altered zone was detected in 2003.The first results from these samplings are presented in the report, which also discusses prospecting efforts in the area as well as relevant Swedish mining legislation. Some suggestions are made for further ore geology investigations. The mineral resources map shows that there is an elongate northwest-southeast zone south and southwest of the candidate area which has a potential for skarn iron ore, and possibly for copper and zinc

The potential for ore and industrial minerals in the Forsmark area

International Nuclear Information System (INIS)

Lindroos, Hardy; Isaksson, Hans; Thunehed, Hans

2004-03-01

A survey has been made of existing information concerning the potential for ore and industrial minerals in and near the candidate area for a deep repository in Forsmark. A deep repository for spent nuclear fuel should not be located in a rock type or an area where mineral extraction might be considered in the future, since this would make it impossible to exploit this natural resource. Avoiding such areas reduces the risk that people in the future will come into contact with the deep repository through mineral prospecting or mining activities. The survey has made use of all the geoscientific information that was compiled in the more regional investigations in Oesthammar Municipality in 1996-97. In cooperation with the Geological Survey of Sweden (SGU), a new, more detailed mineral resources map has been prepared. The map shows areas with an ore potential that may be unsuitable or unfavourable for siting of a deep repository. The results of the recently completed geophysical helicopter surveys of the Forsmark area are presented in a special chapter. The judgement of the area's ore potential is in part based on the geophysical evaluation of these measurements. Furthermore, the survey obtained information from ongoing deep drillings from the site investigation in Forsmark. In order to better be able to judge the ore potential, the survey has initiated a geochemical investigation of activated soil samples, plus an ore geology sampling of a section in the deep borehole KFM02A, where a hydrothermally altered zone was detected in 2003.The first results from these samplings are presented in the report, which also discusses prospecting efforts in the area as well as relevant Swedish mining legislation. Some suggestions are made for further ore geology investigations. The mineral resources map shows that there is an elongate northwest-southeast zone south and southwest of the candidate area which has a potential for skarn iron ore, and possibly for copper and zinc, although

Technique for in situ leach simulation of uranium ores

International Nuclear Information System (INIS)

Grant, D.C.; Seidel, D.C.; Nichols, I.L.

1985-01-01

In situ uranium mining offers the advantages of minimal environmental disturbance, low capital and operating costs, and reduced mining development time. It is becoming an increasingly attractive mining method for the recovery of uranium from secondary ore deposits. In order to better understand the process, a laboratory technique was developed and used to study and simulate both the chemical and physical phenomena occurring in ore bodies during in situ leaching. The laboratory simulation technique has been used to determine effects of leaching variables on permeability, uranium recovery, and post-leach aquifer restoration. This report describes the simulation system and testing procedure in sufficient detail to allow the construction of the system, and to perform the desired leaching tests. With construction of such a system, in situ leaching of a given ore using various leach conditions can be evaluated relatively rapidly in the laboratory. Not only could optimum leach conditions be selected for existing ore bodies, but also exploitation of new ore bodies could be accelerated. 8 references, 8 figures, 2 tables

Economic outlook for radiometric selection of ores

International Nuclear Information System (INIS)

Formery, P.; Ziegler, V.

1958-01-01

The value of an ore can be increased by cutting off it's poor fractions. This selection may be realized at two stages: - part of the ore in situ is unable to cover it's extraction and treatment costs, this defines the 'underground cut-off grade'; - another portion of already extracted ore is unable to cover it's transport and treatment costs; this defines the 'surface cut off grade'. These selections are easily feasible owing to the property of uranium ores of emitting gamma radiations. A diagram makes possible a fast forecast on the effect of this selection upon the weight and metal yields. An attempt is made as well in order to provide the expected effect of the composition of underground cut off and surface cut off. This cut off however, being realized through an appreciation of the radiations, involves an alteration of the weight and metal yields which calls for a correction. A survey of the economic interest of the cut-off is done and an example of valorisation in a given deposit of a section at the limit of operability is proposed. (author) [fr

Prediction of ore fluid metal concentrations from solid solution concentrations in ore-stage calcite: Application to the Illinois-Kentucky and Central Tennessee Mississippi Valley-type districts

Science.gov (United States)

Smith-Schmitz, Sarah E.; Appold, Martin S.

2018-03-01

Knowledge of the concentrations of Zn and Pb in Mississippi Valley-type (MVT) ore fluids is fundamental to understanding MVT deposit origin. Most previous attempts to quantify the concentrations of Zn and Pb in MVT ore fluids have focused on the analysis of fluid inclusions. However, these attempts have yielded ambiguous results due to possible contamination from secondary fluid inclusions, interferences from Zn and Pb in the host mineral matrix, and uncertainties about whether the measured Zn and Pb signals represent aqueous solute or accidental solid inclusions entrained within the fluid inclusions. The purpose of the present study, therefore, was to try to determine Zn and Pb concentrations in MVT ore fluids using an alternate method that avoids these ambiguities by calculating Zn and Pb concentrations in MVT ore fluids theoretically based on their solid solution concentrations in calcite. This method was applied to the Illinois-Kentucky and Central Tennessee districts, which both contain ore-stage calcite. Experimental partition coefficient (D) values from Rimstidt et al. (1998) and Tsusue and Holland (1966), and theoretical thermodynamic distribution coefficient (KD) values were employed in the present study. Ore fluid concentrations of Zn were likely most accurately predicted by Rimstidt et al. (1998) D values, based on their success in predicting known fluid inclusion concentrations of Mg and Mn, and likely also most accurately predicted ore fluid concentrations of Fe. All four of these elements have a divalent ionic radius smaller than that of Ca2+ and form carbonate minerals with the calcite structure. For both the Illinois-Kentucky and the Central Tennessee district, predicted ore fluid Zn and Fe concentrations were on the order of up to 10's of ppm. Ore fluid concentrations of Pb could only be predicted using Rimstidt et al. (1998) D values. However, these concentrations are unlikely to be reliable, as predicted ore fluid concentrations of Sr and Ba

Environmental nuclear-geophysical ore monitoring in mines of Corporation Kazakhmys PLC.

Science.gov (United States)

Yefimenko, Sergei; Yefimenko, Olga; Makarov, Dmitriy

2014-01-01

An environmental monitoring of ore composition in complex deposits of Kazakhstan (the Zhezkazgan, Kusmuryn, Artemjevsk, Kounrad, Taskura and Zhaman-Aibat deposits) is carried out using EDXRF spectrometers RPP-12, RLP-21 and RLP-21T. The monitoring of ore concentrates in Satpaev, Balkhashsk and Zhezkazgan processing plants and in Zhezkazgan copper smelter continues at present time. The monitoring suggests data on new promising elements and environmental pollutants in ores and new trends in distribution of bound elements in ores.

Potential for cobalt recovery from lateritic ores in Europe

Science.gov (United States)

Herrington, R.

2012-04-01

Cobalt is one of the 'critical metals' identified under the EU Raw Materials Initiative. Annually the global mine production of cobalt is around 55,000 tonnes,with Europe's industries consuming around 30% of that figure. Currently Europe produces around 27 tonnes of cobalt from mines in Finland although new capacity is planned. Co-bearing nickel laterite ores being mined in Greece, Macedonia and Kosovo where the cobalt is currently not being recovered (ores have typical analyses of 0.055% Co and >1% Ni,). These ores are currently treated directly in pyrometallurgical plants to recover the contained nickel and this process means there is no separate cobalt product produced. Hydrometallurgical treatment of mineralogically suitable laterite ores can recover the cobalt; for example Cuba recovers 3,500 tonnes of cobalt from its laterite mining operations, which are of a similar scale to the current European operations. Implementation of hydrometallurgical techniques is in its infancy in Europe with one deposit in Turkey planning to use atmospheric heap leaching to recover nickel and copper from oxide-dominated ores. More widespread implementation of these methods to mineralogically suitable ore types could unlock the highly significant undeveloped resources (with metal contents >0.04% Co and >1% Ni), which have been defined throughout the Balkans eastwards into Turkey. At a conservative estimate, this region has the potential to supply up to 30% of the EU cobalt requirements.

Challenges facing the North American iron ore industry

Science.gov (United States)

Jorgenson, J.D.

2005-01-01

During the 20th century, the iron ore mining industries of Canada and the United States passed through several periods of transformation. The beginning of the 21st century has seen yet another period of transformation, with the economic failure of a number of steel companies, the acquisition of their facilities by more viable steelmakers, and the consolidation of control within the North American iron ore industry. Changes in Canadian and United States iron ore production and the market control structure involved are analysed. The consolidation of ownership, formation of foreign joint ventures within Nordi America, planned divestitures of upstream activities by steelmakers, and industry changes made to ensure availability of feedstocks will be reviewed. The ttaditional isolation of the Canadian and United States iron ore operations and their strong linkage to downstream steel production will be discussed in the context of a changing global economy. Management-labour conflicts that have taken place and agreements made during 2000 through 2004 will be discussed in the context of the economic environment leading up to these agreements. Cooperative agreements between competing Canadian and United States companies to resolve client needs in processing and blending will be examined. A joint industry-government project designed to use new technology to produce direct reduced iron nuggets of 96 - 98 per cent iron content using non-coking coals will also be assessed. Changes in iron ore transportation methods, ownership and infrastructure will be reviewed for both rail and inland waterway transport between Canadian and United States companies. A brief analysis of social and environmental issues relating to sustainable development of the Canadian-United States iron ore industry will be included.

Comparison of oxidants in alkaline leaching of uranium ore

International Nuclear Information System (INIS)

Sreenivas, T.; Rajan, K.C.; Srinivas, K.; Anand Rao, K.; Manmadha Rao, M.; Venkatakrishnan, R.R.; Padmanabhan, N.P.H.

2007-01-01

The uranium minerals occurring in various ore deposits consists of predominantly uranous ion (U +4 ), necessitating use of an oxidant and other lixiviants for efficient dissolution during leaching. Unlike acid leaching route, where uranium minerals dissolution could be achieved efficiently with cheaper lixiviants, processing of ores by alkaline leaching route involve expensive lixiviants and drastic leaching conditions. Alkaline leaching of uranium ores becomes economical only upon using cheaper and efficient oxidants and conservation of other reagents by their recycle. The present paper gives efficacy of various oxidants - KMnO 4 , NaOCl, Cu - NH 3 , air and oxygen, in the leaching of uranium from a low-grade dolostone hosted uranium ore of India. A comparison based on technical merits and cost of the oxidant chemicals is discussed. (author)

Microwave enhanced recovery of nickel-copper ore: communition and floatability aspects.

Science.gov (United States)

Henda, R; Hermas, A; Gedye, R; Islam, M R

2005-01-01

A study describing the effect of microwave radiation, at a frequency of 2450 MHz, on the processes of communication and flotation of a complex sulphide nickel-copper ore is presented. Ore communication has been investigated under standard radiation-free conditions and after ore treatment in a radiated environment as a function of ore size, exposure time to radiation, and microwave power. The findings show that communication is tremendously improved by microwave radiation with values of the relative work index as low as 23% at a microwave power of 1.406 kW and after 10 s of exposure time. Communication is affected by exposure time and microwave power in a nontrivial manner. In terms of ore floatability, the experimental tests have been carried out on a sample of 75 microm in size under different exposure times. The results show that both ore concentrate recoveries and grades of nickel and copper are significantly enhanced after microwave treatment of the ore with relative increases in recovered concentrate, grade of nickel, and grade of copper of 26 wt%, 15 wt%, and 27%, respectively, at a microwave power of 1330 kW and after 30 s of exposure time.

Water leaching of titanium from ore flotation residue.

Science.gov (United States)

Jaworska, Malgorzata M; Guibal, Eric

2003-01-01

Copper ore tailings were tested for the stability of titanium submitted to water leaching in three different reactor systems (agitated vessel, bioreactor and percolated fixed-bed column). For each of these systems, titanium extraction did not exceed 1% of the available metal. Biomass removed from ore residue adsorbed a small part of the titanium with sorption capacities below 20-30 mg g(-1), but most of this biomass was sequestered in the ore residue. Oxygen and carbon dioxide concentrations were monitored and changes in concentration correlated with bacteria development at the initial stage of the process and to fungal development in the latter stages.

Distribution of hydrothermal fluid around the ore body in the subseafloor of the Izena hydrothermal field

Science.gov (United States)

Toki, T.; Otake, T.; Ishibashi, J. I.; Matsui, Y.; Kawagucci, S.; Kato, H.; Fuchida, S.; Miyahara, R.; Tsutsumi, A.; Kawakita, R.; Uza, H.; Uehara, R.; Shinjo, R.; Nozaki, T.; Kumagai, H.; Maeda, L.

2017-12-01

From 16th November to 15th December 2016, D/V Chikyu drilled the sea bottom around hydrothermal fields at HAKUREI site in the Izena Hole, Okinawa Trough. Site C9025, C9026, C9027, C9028, and C9032 are located along the transect line from the top of the northern mound of HAKUREI site to the eastward, and Site C9030 for the control site is located about 500 m northwest of the mound. Mg concentrations have generally been used to estimate mixing ratios between hydrothermal end-member and seawater in samples from hydrothermal vents. Higher Mg concentrations, however, were detected in the interstitial water than that of seawater, which could be due to artificially dissolution of Mg-bearing minerals that had formed in in-situ environments, when the cored sediments had become cool after their recovery on ship. Similar features were observed with regard to sulfate concentrations, and it suggests that these chemical species are not suitable to estimate quantitatively the contribution of hydrothermally-derived components. In some layers, chloride concentrations were different from that of seawater, indicating that hydrothermal fluids that had been suffered from phase separation flowed into the layers. The deviation, however, was positive or negative relative to that of seawater for an influence of brine or vapor phase, respectively. Therefore chloride concentrations are also not suitable to evaluate a quantitative contribution of hydrothermal end-member. On the other hand, K and B showed only enrichments relative to the seawater, and their highest concentrations are consistent with the reported hydrothermal end-members of each species at HAKUREI site. Using the concentrations of K and B can be evaluated for an influence of hydrothermal components. Furthermore, the headspace gas data are useful in the layers of sulfide minerals and silicified rocks, even though the interstitial waters could not be obtained because of their hardness. Based on these indices, hydrothermal fluids

Arsenic bioleaching in medical realgar ore and arsenicbearing ...

African Journals Online (AJOL)

However, the maximum arsenic leaching ratio from realgar in the presence of mixed unadapted strains was only 12.4 %. Besides, maximum arsenic leaching ratios from arsenic-bearing refractory gold ore by mixed adapted strains or unadapted strains were 45.0 and 22.9 %, respectively. Oxidation of these two ores by ...

40 CFR 440.90 - Applicability; description of the antimony ore subcategory.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Applicability; description of the antimony ore subcategory. 440.90 Section 440.90 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ORE MINING AND DRESSING POINT SOURCE CATEGORY Antimony Ore Subcategory § 440.90 Applicability;...

Proposal for selecting an ore sample from mining shaft under Kvanefjeld

International Nuclear Information System (INIS)

Lund Clausen, F.

1979-02-01

Uranium ore recovered from the tunnel under Kvanefjeld (Greenland) will be processed in a pilot plant. Selection of a fully representative ore sample for both the whole area and single local sites is discussed. A FORTRAN program for ore distribution is presented, in order to enable correct sampling. (EG)

Measurement and Modelling of Blast Movement to Reduce Ore ...

African Journals Online (AJOL)

user

geologists at Newmont Ahafo Mine have realised the impact of blast movement on ore losses and dilution and have ... Movement to Reduce Ore Losses and Dilution at Ahafo Gold Mine in Ghana”, Ghana Mining Journal, pp. .... classification.

Nuclear techniques for bulk ore analysis and their application to quality control

International Nuclear Information System (INIS)

Holmes, R.J.

1981-01-01

Bulk analysis techniques developed for the mining industry in which analyses are obtained directly from 3-30kg ore samples or from ore on conveyor belts are outlined. They include the determination of iron in iron ores from backscattered gamma radiation, shale in sedimentary iron ores from natural gamma activity, iron from a thermal-neutron capture reaction, and aluminium from the thermal neutron activation reaction

Space shuttle SRM field joint: Review paper

Directory of Open Access Journals (Sweden)

S. Mohammad Gharouni

2014-09-01

Full Text Available Due to Challenger space shuttle accident in 1986, significant research has been done concerning structural behavior of field joints in solid rocket boosters (SRB. The structural deformations between the clevis inner leg and the tang (male-to-female parts of joint, the sealing of the O-ring to prevent the hot gas in joints, has been neglected causing the failure of the vehicle. Redesigning the field joint in SRB engine by accurate analysis of dynamic and thermal loads and by design of insulator and good O-ring, the leakiness of combustion hot gases was eliminated. Some parts of field joint such as capture feature (CF and its third O-ring, J-leg insulator and shim were added to redesigned field joint. Also, some adjustments in sealing system and pins were done to promote the efficiency of the field joint. Due to different experimental analysis on assembled field joints with default imperfections, redesigned joints operated well. These redesigned field joints are commonly used in aerospace and mechanical structures. This paper investigates the original and the redesigned field joints with additional explanations of different parts of the redesigned joints.

Mineralogical study of zard koh and kulli koh iron ore deposits of pakistan

International Nuclear Information System (INIS)

Khoso, S.A.; Abro, M.I.

2017-01-01

Zard Koh and Kulli Koh are two recently discovered iron ore deposits, existing in the Chagai district, Balochistan, Pakistan. PSM (Pakistan Steel Mill Limited) is interested to utilize these ore deposits at priority. Purpose of the present study was to assess the mineralogy of the Zard Koh and Kulli Koh iron ore deposits, as it plays a vital role in the selection of an appropriate processing method. The mineralogical study of ore deposits was carried out by XRD (X-Ray Diffraction), XRF (X-Ray Fluorescence), SEM (Scanning Electron Microscope) attached with EDS (Energy Dispersive Spectroscope) and SM (Stereomicroscope) techniques. Results indicated that the Zard Koh ore is mainly composed of 60.15% maghemite, 23.57% pyrite, 4.07% chlorite, 10.30% grossular and 1.65% admontite minerals. The chemical analysis revealed that Zard Koh iron ore contains an average of 54.27% Fe, 12.73% S, 8.70% Si, 3.07% Al, 4.07% Ca, and 2.16% Mg. Similarly, the mineralogical study of the Kulli Koh iron ore indicated that, ore is containing 51.16% hematite, 29.24% quartz, 8.89% dravite, and 8.76% kaolinite minerals. Elemental analysis of different samples indicated that Kulli Koh iron ore contains an average composition of 40.23% Fe, 20.67% Si, 3.44% Ca, 3.81% Al and 3.25% Mg. Mineralogical study of the Zard Koh and Kulli Koh iron ore deposits suggested that these ore deposits can be beneficiated costeffectively by using magnetic separation techniques. (author)

Uranium and thorium recovery in thorianite ore-preliminary results

Energy Technology Data Exchange (ETDEWEB)

Gaiotte, Joao V.M. [Universidade Federal de Alfenas, Pocos de Caldas, MG (Brazil); Villegas, Raul A.S.; Fukuma, Henrique T., E-mail: rvillegas@cnen.gov.br, E-mail: htfukuma@cnen.gov.br [Comissao Nacional de Energia Nuclear (CNEN), Pocos de Caldas, MG (Brazil). Lab. de Pocos de Caldas

2011-07-01

This work presents the preliminary results of the studies aiming to develop a hydrometallurgical process to produce uranium and thorium concentrates from thorianite ore from Amapa State, Brazil. This process comprises two major parts: acid leaching and Th/U recovery using solvent extraction strategies. Thorianite ore has a typical composition of 60 - 70% of thorium, 8 - 10% lead and 7 - 10% uranium. Sulfuric acid leaching operational conditions were defined as follows: acid/ore ratio 7.5 t/t, ore size below 65 mesh (Tyler), 2 hours leaching time and temperature of 100 deg C. Leaching tests results showed that uranium and thorium recovery exceeded 95%, whereas 97% of lead ore content remained in the solid form. Uranium and thorium simultaneous solvent extraction is necessary due to high sulfate concentration in the liquor obtained from leaching, so the Primene JM-T primary anime was used for this extraction step. Aqueous raffinate from extraction containing sulfuric acid was recycled to the leaching step, reducing acid uptake around 60%, to achieve a net sulfuric acid consumption of 3 t/t of ore. Uranium and thorium simultaneous stripping was performed using sodium carbonate solution. In the aqueous stripped it was added sulfuric acid at pH 1.5, followed by a second solvent extraction step using the tertiary amine Alamine 336. The following stripping step was done with a solution of sodium chloride, resulting in a final solution of 23 g L-1 uranium. (author)

Underground leaching - A method for the economic extraction of uranium from low-grade ores; Podzemnoe vyshchelachivanie - sposob ehkonomicheskogo izvlecheniya urana iz bednykh rud

Energy Technology Data Exchange (ETDEWEB)

Zefirov, A P [Gosudarstvennyj Komitet po Ispol' zovaniyu Atomnoj EHnergii SSSR, Moskva, Union of Soviet Socialist Republics (Russian Federation)

1967-06-15

The method of underground leaching of uranium ores has a number of advantages over extraction followed by processing of the ores in factories. It has been studied in two types of deposit, occurring in rock masses and sandy shales. Research techniques were worked out accordingly for the leaching of uranium from large-grained ore (-200 mm) and from layers in natural stratification. Special models were constructed permitting the simulation of underground leaching conditions. The results obtained were checked in field conditions on experimental plots and experimental underground blocks. The investigations demonstrated the practicability of the process of underground leaching of uranium from certain ores and made it possible to work out flow-sheets and routines for an industrial process, information about which is given in the paper. (author)

Environmental radiation monitoring around waste ore disposal site in Tottori prefecture: fiscal year 1999

International Nuclear Information System (INIS)

2000-03-01

This document is the compilation of environmental monitoring around waste uranium ore disposal site, near Ningyo-toge mine in Tottori prefecture. The results have been reported to Okayama and Tottori prefectures. The objects for monitoring were river water, drinking water, river sediments, paddy field sediments, air, rice, vegetables, and fruits. (A. Yamamoto)

Decomposition of silica-alumina ores of Afghanistan by sulfuric acid

International Nuclear Information System (INIS)

Khomidi, A.K.; Mamatov, E.D.

2016-01-01

Present article is devoted to decomposition of silica-alumina ores of Afghanistan by sulfuric acid. Physicochemical properties of initial silica-alumina ores were studied by means of X-ray phase, differential thermal and silicate analysis. The influence of temperature, process duration and acid concentration on extraction rate of valuable components was considered. The optimal conditions of decomposition of silica-alumina ores of Afghanistan by sulfuric acid were proposed.

Residues leaching from 'Factory of barren ores'

International Nuclear Information System (INIS)

Rakhmatov, N.; Khakimov, N.; Nazarov, Kh.M.; Barotov, A.M.

2012-01-01

The objective of the present work is safe management of residues from Factory of Barren Ores, their reprocessing, expenditures reduction for remediation of Istiklol city former uranium tailings. For this purpose, some experiences were adopted - Factory of Barren Ores tailing use for filling up the open pit where water with uranium content 3-5 mg/l is located. Factory of Barren Ores waste are passed through heap leaching and have some amount of uranium salts dissolved in water. Thus, we propose to dissolve uranium from Factory of Barren Ores wastes with uranium bearing water flowing out from gallery and filling up the open-pit by radioactive wastes. In so doing, uranium content flowing out from gallery will increase twice, and further, passing them through apricot's shell, as a sorbent, we will clean the water against radionuclides. Residue samples with uranium content 0,015% from Factory of Barren Ores and uranium bearing waters from gallery 1 with uranium content 0,0025 g/l were used for laboratory tests. After which, a slurry was prepared by means of residue mixing with water in ratio of solid and liquid phases (S:L) - 1:2 and 9,7 ml of sulfuric acid (Ρ=1,82) was added which corresponds consumption by H 2 SO 4 176,54 kg/t. For the first test, leaching was carried out during 4 hours at ph=1,6 at room temperature. For the second test, leaching was carried out at 60 d eg C a nd ph=1,6 during 4 hours. Slurry heating and mixing was carried out by means of magnetic mixer. The basic residue leaching indicators are provided in this article.

Ore microscopy applied to beneficiation

International Nuclear Information System (INIS)

Hagni, R.D.

1978-01-01

Ore microscopy can be an important adjunct to beneficiation, because it can be used not only to predict mill problems of undeveloped ore deposits but to identify the causes for the loss of minerals in the products of operating mines and mills. Mineral distribution among various mill products can be determined by examining polished sections prepared from samples obtained from each step of the beneficiation process. The degree of liberation of each mineral can be quantitatively determined for each mill product by counting locked vs. free particles. For many beneficiation problems, the preparation of a few polished sections of carefully selected mill products can yield useful information, which the mill dressing engineer can effectively use to alleviate those problems

X-ray radiometric separation of low-grade tin ores

Energy Technology Data Exchange (ETDEWEB)

Kotler, N.I.; Neverov, A.D.; Konovalov, V.M.; Mironov, I.I.; Zakharov, S.N.

1984-10-01

The investigations on evaluation of X-ray radiometric separation of off-grade tin ores of one of the deposits are carried out. The experiments have been performed at loboratory and pilot-commerical plants. /sup 241/Am has been used as a radiation source. In the course of facility commercial the ore has been separated by means of a device comprising a separator and gate separatin device. The results of X-ray radiometric separation have shown its high productive efficiency. Concentrates with higher tin content at high extraction from ores are obtained.

X-ray radiometric separation of low-grade tin ores

International Nuclear Information System (INIS)

Kotler, N.I.; Neverov, A.D.; Konovalov, V.M.; Mironov, I.I.; Zakharov, S.N.

1984-01-01

The investigations on evaluation of X-ray radiometric separation of off-grade tin ores of one of the deposits are carried out. The experiments have been performed at loboratory and pilot-commerical plants. 241 Am has been used as a radiation source. In the course of facility commercial the ore has been separated by means of a device comprising a separator and gate separatin device. The results of X-ray radiometric separation have shown its high productive efficiency. Concentrates with higher tin content at high extraction from ores are obtained

Application of natural analog studies to exploration for ore deposits

International Nuclear Information System (INIS)

Gustafson, D.L.

1995-01-01

Natural analogs are viewed as similarities in nature and are routinely utilized by exploration geologists in their search for economic mineral deposits. Ore deposit modeling is undertaken by geologists to direct their exploration activities toward favorable geologic environments and, therefore, successful programs. Two types of modeling are presented: (i) empirical model development based on the study of known ore deposit characteristics, and (ii) concept model development based on theoretical considerations and field observations that suggest a new deposit type, not known to exist in nature, may exist and justifies an exploration program. Key elements that are important in empirical model development are described, and examples of successful applications of these natural analogs to exploration are presented. A classical example of successful concept model development, the discovery of the McLaughlin gold mine in California, is presented. The utilization of natural analogs is an important facet of mineral exploration. Natural analogs guide explorationists in their search for new discoveries, increase the probability of success, and may decrease overall exploration expenditure

Isolation and identification of iron ore-solubilising fungus

Directory of Open Access Journals (Sweden)

Damase Khasa

2010-09-01

Full Text Available Potential mineral-solubilising fungi were successfully isolated from the surfaces of iron ore minerals. Four isolates were obtained and identified by molecular and phylogenetic methods as close relatives of three different genera, namely Penicillium (for isolate FO, Alternaria (for isolates SFC2 and KFC1 and Epicoccum (for isolate SFC2B. The use of tricalcium phosphate (Ca₃(PO₄₂in phosphate-solubilising experiments confirmed isolate FO as the only phosphate solubiliser among the isolated fungi. The bioleaching capabilities of both the fungus and its spent liquid medium were tested and compared using two types of iron ore materials, conglomerate and shale, from the Sishen Iron Ore Mine as sources of potassium (K and phosphorus (P. The spent liquid medium removed more K (a maximum of 32.94% removal, from conglomerate, than the fungus (a maximum of 21.36% removal, from shale. However, the fungus removed more P (a maximum of 58.33% removal, from conglomerate than the spent liquid medium (a maximum of 29.25% removal, from conglomerate. The results also indicated a potential relationship between the removal of K or P and the production of organic acids by the fungus. A high production of gluconic acid could be related to the ability of the fungus to reduce K and P. Acetic, citric and maleic acids were also produced by the fungus, but in lower quantities. In addition, particle size and iron ore type were also shown to have significant effects on the removal of potassium and phosphorus from the iron ore minerals. We therefore conclude that the spent liquid medium from the fungal isolate FO can potentially be used for biobeneficiation of iron ore minerals.

Economic evaluation of preconcentration of uranium ores

International Nuclear Information System (INIS)

1981-04-01

The economics of two options for the preconcentration of low-grade uranium ores prior to hydrochloric acid leaching were studied. The first option uses flotation followed by wet high-intensity magnetic separation. The second option omits the flotation step. In each case it was assumed that most of the pyrite in the ore would be recovered by froth flotation, dewatered, and roasted to produce sulphuric acid and a calcine suitable for acid leaching. Savings in operating costs from preconcentration are offset by the value of uranium losses. However, a capital saving of approximately 6 million dollars is indicated for each preconcentration option. As a result of the capital saving, preconcentration appears to be economically attractive when combined with hydrochloric acid leaching. There appears to be no economic advantage to preconcentration in combination with sulphuric acid leaching of the ore

Dynamics of leaching a uniformly fissured ore body

International Nuclear Information System (INIS)

Ignatov, A.A.; Proskurin, S.A.

1987-01-01

Mathematical simulation was used to study the dynamics of mass transfer during the percolation of a reagent solution through a packing of coarse ore particles. The uniformly fissured ore body was represented by a cubic packing of spherical particles of constant radius, formed from a chemically inert silicate cement with a uniformly distributed soluble mineral component. The rate of percolation of the reagent through the packing was constant. The proposed model can be used to find the conditions for underground hydrodynamic leaching. The rate of non-catalytic solid-liquid reaction was deduced on the basis of both the kinetics of dissolution of the mineral component of the ore and the rate of diffusion of the dissolved substance

Moessbauer study of the chemical state of gold in gold ores

International Nuclear Information System (INIS)

Wagner, F.E.; Marion, P.H.; Regnard, J.-R.

1986-01-01

Information on the chemical state of gold in gold ores has been obtained by 197 Au Moessbauer spectroscopy in cases where the state of this element cannot be determined by such standard methods as optical or electron microscopy. Ore concentrates consisting mainly of pyrite or arsenopyrite and roasted ore and matte samples were studied. The results yielded directly the respective amounts of metallic and chemically bound gold. Unless the gold is metallic, its chemical state in the ores turns out to be different from that in the minerals studied so far as reference materials. The chemical processes taking place during various treatments of the ores, such as roasting or leaching, can also be followed by Moessbauer spectroscopy. It is hoped that Moessbauer spectroscopy will eventually facilitate the development of more efficient methods of gold extraction

Paleomagnetic dating of non-sulfide Zn-Pb ores in SW Sardinia (Italy: a first attempt

Directory of Open Access Journals (Sweden)

L. Sagnotti

2005-06-01

Full Text Available A first paleomagnetic investigation aimed at constraining the age of the non-sulfide Zn-Pb ore deposits in the Iglesiente district (SW Sardinia, Italy was carried out. In these ores, the oxidation of primary sulfides, hosted in Cambrian carbonate rocks, was related to several paleoweathering episodes spanning from the Mesozoic onward. Paleomagnetic analyses were performed on 43 cores from 4 different localities, containing: a non-oxidized primary sulfides and host rock, b oxidized Fe-rich hydrothermal dolomites and (c supergene oxidation ore («Calamine». Reliable data were obtained from 18 samples; the others show uninterpretable results due to low magnetic intensity or to scattered demagnetization trajectories. Three of them show a scattered Characteristic Remanent Magnetization (ChRM, likely carried by the original (i.e. Paleozoic magnetic iron sulfides. The remaining 15 samples show a well defined and coherent ChRM, carried by high-coercivity minerals, acquired after the last phase of counterclockwise rotation of Sardinia (that is after 16 Myr, in a time interval long enough to span at least one reversal of the geomagnetic field. Hematite is the main magnetic carrier in the limestone, whereas weathered hydrothermal dolomite contains goethite or a mixture of both. The results suggest that paleomagnetism can be used to constrain the timing of oxidation in supergene-enriched ores.

Mineralogical Study of Zard Koh and Kulli Koh Iron Ore Deposits of Pakistan

Directory of Open Access Journals (Sweden)

SULTAN AHMED KHOSO

2017-10-01

Full Text Available Zard Koh and Kulli Koh are two recently discovered iron ore deposits, existing in the Chagai district, Balochistan, Pakistan. PSM (Pakistan Steel Mill Limited is interested to utilize these ore deposits at priority. Purpose of the present study was to assess the mineralogy of the Zard Koh and Kulli Koh iron ore deposits, as it plays a vital role in the selection of an appropriate processing method. The mineralogical study of ore deposits was carried out by XRD (X-Ray Diffraction, XRF (X-Ray Fluorescence, SEM (Scanning Electron Microscope attached with EDS (Energy Dispersive Spectroscope and SM (Stereomicroscope techniques. Results indicated that the Zard Koh ore is mainly composed of 60.15% maghemite, 23.57% pyrite, 4.07% chlorite, 10.30% grossular and 1.65% admontite minerals. The chemical analysis revealed that Zard Koh iron ore contains an average of 54.27% Fe, 12.73% S, 8.70% Si, 3.07% Al, 4.07% Ca, and 2.16% Mg. Similarly, the mineralogical study of the Kulli Koh iron ore indicated that, ore is containing 51.16% hematite, 29.24% quartz, 8.89% dravite, and 8.76% kaolinite minerals. Elemental analysis of different samples indicated that Kulli Koh iron ore contains an average composition of 40.23% Fe, 20.67% Si, 3.44% Ca, 3.81% Al and 3.25% Mg. Mineralogical study of the Zard Koh and Kulli Koh iron ore deposits suggested that these ore deposits can be beneficiated costeffectively by using magnetic separation techniques.

Developments of uranium and gold ores heap leaching technologies

International Nuclear Information System (INIS)

Tian Yuan; Guan Zibin; Gao Renxi

1998-01-01

The author reviews developments in heap leaching of uranium and gold ores at home and abroad, summarises condition of application. The author also presents problems having to be studied and settled urgently in heap leaching of uranium and gold ores in China

Extraction of metals from ores by bacterial leaching: present status and future prospects

International Nuclear Information System (INIS)

Kelly, D.P.

1977-01-01

The principal organism effecting bacterial leaching of ferrous and sulfide ores is Thiobacillus ferrooxidans, though other thiobacilli and other bacteria may be involved. The process depends on (a) direct solubilization of metal sulfides by bacterial oxidation; (b) dissolution of metal sulfides or oxides by ferric iron produced by bacterial pyrite oxidation. Mining spoil dumps and low grade ores can be leached for copper or uranium by cheap low-level technology. Dump leaching enables maximum recovery of valuable metal from any ore, but makes possible exploitation of very low grade Cu and U ores. Continuous extraction processes are possible where a continuously growing bacterial culture is fed with pyritic ores (or FeSO 4 or other sulfide) and continuous metal solubilization proceeds. Intimate contact between the bacteria and the ore to be leached (especially with uranium oxide ores) is not always necessary: leaching of UO 2 ores probably depends only on ferric iron reaction with the ore. Degradation of pyrite-containing rocks may also be developed as part of future recovery processes for petroleum from oil shales. Two-stage leaching systems present the best prospect for developing a higher-level technology for metal extraction. State 1: bacterial generation of Fe 3+ from pyrite or a Fe 2+ source; Stage 2: chemical leaching of ore by Fe 3+ in acid solution. Two-stage processes can be surface processes using crushed or milled ores or can be applied to underground solution mining, when an ore (e.g. uranium) can be leached by pumping Fe 3+ solutions through shattered underground deposits, metal recovered (e.g. solvent extraction) and Fe 3+ regenerated by bacterial oxidation at the surface. The use of controlled continuous microbial cultures to generate either bacteria or ferric iron is outlined

Novel Binders and Methods for Agglomeration of Ore

Energy Technology Data Exchange (ETDEWEB)

S. K. Kawatra; T. C. Eisele; K. A. Lewandowski; J. A. Gurtler

2006-03-31

Many metal extraction operations, such as leaching of copper, leaching of precious metals, and reduction of metal oxides to metal in high-temperature furnaces, require agglomeration of ore to ensure that reactive liquids or gases are evenly distributed throughout the ore being processed. Agglomeration of ore into coarse, porous masses achieves this even distribution of fluids by preventing fine particles from migrating and clogging the spaces and channels between the larger ore particles. Binders are critically necessary to produce agglomerates that will not break down during processing. However, for many important metal extraction processes there are no binders known that will work satisfactorily at a reasonable cost. A primary example of this is copper heap leaching, where there are no binders currently encountered in this acidic environment process. As a result, operators of many facilities see a large loss of process efficiency due to their inability to take advantage of agglomeration. The large quantities of ore that must be handled in metal extraction processes also means that the binder must be inexpensive and useful at low dosages to be economical. The acid-resistant binders and agglomeration procedures developed in this project will also be adapted for use in improving the energy efficiency and performance of a broad range of mineral agglomeration applications, particularly heap leaching. The active involvement of our industrial partners will help to ensure rapid commercialization of any agglomeration technologies developed by this project.

NOVEL BINDERS AND METHODS FOR AGGLOMERATION OF ORE

Energy Technology Data Exchange (ETDEWEB)

S.K. Kawatra; T.C. Eisele; J.A. Gurtler; C.A. Hardison; K. Lewandowski

2004-04-01

Many metal extraction operations, such as leaching of copper, leaching of precious metals, and reduction of metal oxides to metal in high-temperature furnaces, require agglomeration of ore to ensure that reactive liquids or gases are evenly distributed throughout the ore being processed. Agglomeration of ore into coarse, porous masses achieves this even distribution of fluids by preventing fine particles from migrating and clogging the spaces and channels between the larger ore particles. Binders are critically necessary to produce agglomerates that will not break down during processing. However, for many important metal extraction processes there are no binders known that will work satisfactorily. Primary examples of this are copper heap leaching, where there are no binders that will work in the acidic environment encountered in this process, and advanced ironmaking processes, where binders must function satisfactorily over an extraordinarily large range of temperatures (from room temperature up to over 1200 C). As a result, operators of many facilities see a large loss of process efficiency due to their inability to take advantage of agglomeration. The large quantities of ore that must be handled in metal extraction processes also means that the binder must be inexpensive and useful at low dosages to be economical. The acid-resistant binders and agglomeration procedures developed in this project will also be adapted for use in improving the energy efficiency and performance of a broad range of mineral agglomeration applications, particularly heap leaching and advanced primary ironmaking.

Novel Binders and Methods for Agglomeration of Ore

Energy Technology Data Exchange (ETDEWEB)

S. K. Kawatra; T. C. Eisele; J. A. Gurtler; K. Lewandowski

2005-09-30

Many metal extraction operations, such as leaching of copper, leaching of precious metals, and reduction of metal oxides to metal in high-temperature furnaces, require agglomeration of ore to ensure that reactive liquids or gases are evenly distributed throughout the ore being processed. Agglomeration of ore into coarse, porous masses achieves this even distribution of fluids by preventing fine particles from migrating and clogging the spaces and channels between the larger ore particles. Binders are critically necessary to produce agglomerates that will not break down during processing. However, for many important metal extraction processes there are no binders known that will work satisfactorily at a reasonable cost. A primary example of this is copper heap leaching, where there are no binders currently encountered in this acidic environment process. As a result, operators of many facilities see a large loss of process efficiency due to their inability to take advantage of agglomeration. The large quantities of ore that must be handled in metal extraction processes also means that the binder must be inexpensive and useful at low dosages to be economical. The acid-resistant binders and agglomeration procedures developed in this project will also be adapted for use in improving the energy efficiency and performance of a broad range of mineral agglomeration applications, particularly heap leaching. The active involvement of our industrial partners will help to ensure rapid commercialization of any agglomeration technologies developed by this project.

Effects of Ore dust pollution on the physical and chemical features ...

African Journals Online (AJOL)

Effects of wind-blown iron and manganese ore dust on the upper part of a sandy beach have been investigated. The fine ore dust was found to reduce the porosity and permeability of the sand by clogging the interstices. The presence of ore dust also greatly increased the rate of heating and cooling of beach sand. Further ...

The Bairendaba silver polymetallic deposit in Inner Mongolia, China: characteristics of ore-forming fluid and genetic type of ore deposit

Science.gov (United States)

Wang, Ying; Xie, Yuling; Wu, Haoran

2018-02-01

Bairendaba silver-polymetallic deposit is located in the middle south of the Xing Meng orogenic belt, and in the silver-polymetallic metallogenic belt on the west slope of the southern of Great Xing’an Range. Based on studying of the fluid inclusion, we discuss the characteristics of ore-forming fluid and the metallic genesis of the Bairendaba silver-polymetallic deposit. By means of the analysis of the fluid inclusions, homogenization temperature, salinity and composition were studied in quartz and fluorite. The result is as the follows: with homogenization temperatures of fluid inclusions in quartz veins being 196∼312 °C, the average 244.52 °C, and fluid salinity 2.90∼9.08 wt%NaCl; with homogenization temperatures of fluid inclusions in fluorite being 127∼306 °C, the average 196.92 °C, and fluid salinity 2.90∼9.34 wt% NaCl. The ore-forming fluid is mainly composed of water and the gas. The results of laser Raman analysis show that the gas phase is mainly CH4. It shows that the ore-forming fluid is characterized by medium-low temperature and low-salinity system. The temperature of ore-forming fluid is from high to low, and the salinity from high to low, and the meteoric water or metamorphic water is added during deposit. According to the geological characteristics of the mining area, it is considered that the genetic type of the ore deposit should be the fault-controlled and the medium-low temperature hydrothermal deposit related to magmatic hydrothermal activities.

MR imaging of ore for heap bioleaching studies using pure phase encode acquisition methods

Science.gov (United States)

Fagan, Marijke A.; Sederman, Andrew J.; Johns, Michael L.

2012-03-01

Various MRI techniques were considered with respect to imaging of aqueous flow fields in low grade copper ore. Spin echo frequency encoded techniques were shown to produce unacceptable image distortions which led to pure phase encoded techniques being considered. Single point imaging multiple point acquisition (SPI-MPA) and spin echo single point imaging (SESPI) techniques were applied. By direct comparison with X-ray tomographic images, both techniques were found to be able to produce distortion-free images of the ore packings at 2 T. The signal to noise ratios (SNRs) of the SESPI images were found to be superior to SPI-MPA for equal total acquisition times; this was explained based on NMR relaxation measurements. SESPI was also found to produce suitable images for a range of particles sizes, whereas SPI-MPA SNR deteriorated markedly as particles size was reduced. Comparisons on a 4.7 T magnet showed significant signal loss from the SPI-MPA images, the effect of which was accentuated in the case of unsaturated flowing systems. Hence it was concluded that SESPI was the most robust imaging method for the study of copper ore heap leaching hydrology.

Effective Processing of the Iron Ores

Science.gov (United States)

Kuskov, Vadim; Kuskova, Yana; Udovitsky, Vladimir

2017-11-01

Effective technology for a complex wasteless processing of the iron ores has been designed and includes three main components (plats): comminution plant, briquette plant, pigment plant. The comminution is done per energy effective technology. Using of briquetting for ores clotting enables the costs cut and brings to a higher level of environmental safety of the process. Briquette formation can be done as a regular pressing, as an extrusion. Developed technology allows to produce high quality competitively products for metallurgy industry and red iron oxide pigments. The whole production line impacts the environment in a minimal manner.

Effective Processing of the Iron Ores

Directory of Open Access Journals (Sweden)

Kuskov Vadim

2017-01-01

Full Text Available Effective technology for a complex wasteless processing of the iron ores has been designed and includes three main components (plats: comminution plant, briquette plant, pigment plant. The comminution is done per energy effective technology. Using of briquetting for ores clotting enables the costs cut and brings to a higher level of environmental safety of the process. Briquette formation can be done as a regular pressing, as an extrusion. Developed technology allows to produce high quality competitively products for metallurgy industry and red iron oxide pigments. The whole production line impacts the environment in a minimal manner.

Decomposition of pre calcined aluminium silicate ores of Afghanistan by hydrochloric acid

International Nuclear Information System (INIS)

Khomidi, A.K.; Mamatov, E.D.

2015-01-01

Present article is devoted to decomposition of pre calcined aluminium silicate ores of Afghanistan by hydrochloric acid. The physicochemical properties of initial aluminium silicate ores were studied by means of X-ray phase, differential thermal and silicate analysis. The chemical composition of aluminium containing ores was determined. The optimal conditions of interaction of initial and pre calcined siallites with hydrochloric acid were defined. The kinetics of acid decomposition of aluminium silicate ores was studied as well.

Chapter 1. General information about uranium. 1.3. Uranium ores

International Nuclear Information System (INIS)

Khakimov, N.; Nazarov, Kh.M.; Mirsaidov, I.U.

2012-01-01

The uranium ores were described. It was found that uranium ores and natural mineral formations containing uranium and its compounds, can be found in concentrations that are technically possible for industrial utilization and which are economically profitable. It was defined that oxidation levels of uranium minerals have an impact on their reprocessing technology and behavior in hydrometallurgical re partition. It was found that the chemical composition of ores has a decisive importance during selection of their reprocessing method.

Utilisation of iron ore tailings as aggregates in concrete

Directory of Open Access Journals (Sweden)

Francis Atta Kuranchie

2015-12-01

Full Text Available Sustainable handling of iron ore tailings is of prime concern to all stakeholders who are into iron ore mining. This study seeks to add value to the tailings by utilising them as a replacement for aggregates in concrete. A concrete mix of grade 40 MPa was prepared in the laboratory with water–cement ratio of 0.5. The concrete were cured for 1, 2, 3, 7, 14 and 28 days. The properties of the concrete such as workability, durability, density, compressive strength and indirect tensile strength were tested. A controlled mix of concrete was also prepared in similar way using conventional materials and the results were compared with the tailings concrete. It was found that the iron ore tailings may be utilised for complete replacement for conventional aggregates in concrete. The iron ore tailings aggregates concrete exhibited a good mechanical strength and even in the case of compressive strength, there was an improvement of 11.56% over conventional aggregates concrete. The indirect tensile strength did not improve against the control mix due high content of fines in the tailings aggregates but showed 4.8% improvement compared with the previous study where the conventional fine aggregates was partially replaced by 20% with iron ore tailings.

Mineralogical and geochemical characteristics of the Noamundi-Koira basin iron ore deposits (India)

Science.gov (United States)

Mirza, Azimuddin; Alvi, Shabbar Habib; Ilbeyli, Nurdane

2015-04-01

India is one of the richest sources of iron ore deposits in the world; and one of them is located in the Noamundi-Koira basin, Singhbhum-Orissa craton. The geological comparative studies of banded iron formation (BIF) and associated iron ores of Noamundi-Koira iron ore deposits, belonging to the iron ore group in eastern India, focus on the study of mineralogy and major elemental compositions along with the geological evaluation of different iron ores. The basement of the Singhbhum-Orissa craton is metasedimentary rocks which can be traced in a broadly elliptical pattern of granitoids, surrounded by metasediments and metavolcanics of Greenstone Belt association. The Singhbhum granitoid is intrusive into these old rocks and to younger, mid Archaean metasediments, including iron formations, schists and metaquartzites and siliciclastics of the Precambrian Iron Ore Group (Saha et al., 1994; Sharma, 1994). The iron ore of Noamundi-Koira can be divided into seven categories (Van Schalkwyk and Beukes 1986). They are massive, hard laminated, soft laminated, martite-goethite, powdery blue dust and lateritic ore. Although it is more or less accepted that the parent rock of iron ore is banded hematite jasper (BHJ), the presence of disseminated martite in BHJ suggests that the magnetite of protore was converted to martite. In the study area, possible genesis of high-grade hematite ore could have occurred in two steps. In the first stage, shallow, meteoric fluids affect primary, unaltered BIF by simultaneously oxidizing magnetite to martite and replacing quartz with hydrous iron oxides. In the second stage of supergene processes, deep burial upgrades the hydrous iron oxides to microplaty hematite. Removal of silica from BIF and successive precipitation of iron resulted in the formation of martite- goethite ore. Soft laminated ores were formed where precipitation of iron was partial or absent. The leached out space remains with time and the interstitial space is generally filled

Flotation of uranium from uranium ores in Canada. Part 1

International Nuclear Information System (INIS)

Muthuswami, S.V.; Vigayan, S.; Woods, D.R.; Banerjee, S.

1983-01-01

About 150 flotation tests were done on Elliot Lake ore with 15 reagents as collectors in order to screen and choose an attractive collector for uranium flotation. Several variables were studied including pH, conditioning time and mode of collector addition. The tests were done in a Denver or Agitair subaeration cell. The particle size of the ore was kept at 85% below -325 mesh. Three reagents (Kelex 00, TOPO, and cupferron) were identified as having the most promise. The best results were obtained with cupferron, where 93-95% of the uranium was recovered in 25-30% of the mass of original ore. Radium in the tails varied between 5 and 30 pCi/g depending on the mass of uranium floated. Radium was recovered in proportion to uranium in the tests done at neutral pH. The preconcentration results obtained by flotation alone were comparable to those obtained using pyrite flotation and wet high-intensity magnetic separation of uranium. The consumption of cupferron was 4 kg/Mg ore for each flotation stage. This was 10-15 times larger than the collector usage in conventional oxide flotation. This scheme did not require other reagents as depressants, activators or modifiers. Reproducibility was good and similar recoveries were obtained with fresh or old ores, and with distilled or mine water. The selectivity of cupferron for uranium in the ore studied was outstanding

Commercial development of a new process of uraniferous ore sintering by pelletizing before dump leaching (wet process) application to a very clayey ore of Nord-Aquitaine

International Nuclear Information System (INIS)

Videau, G.; Roche, M.

1990-01-01

Much of the French uranium ore contains clay of sedimentary origin or derived from the alteration of rocks of the granite type. During a dump leaching operation by a wet process, these clays reduce the percolation rates and sometimes the percolation rates are so low that the very essence of the dump leaching operation can be called in question. This problem arises particularly for the treatment of the ore of Nord-Aquitaine. The results of tests, carried out at the SEPA in Bessines, have shown that after pelletizing clayey ores with sodium silicate in the presence of sulphuric acid for the polymerization of the silicate, the percolation rates were much increased. This new method was successfully applied, from a laboratory column to a pilot dump of 500 tonnes for the very clayey ore of Nord-Aquitaine. This ore of low grade (approx. 1000 ppm of U) seems to be difficult to upgrade by any other method of treatment in the present economic context [fr

Technological studies on the Manisa-Koprubasi uranium ores of Turkey

International Nuclear Information System (INIS)

Sagdik, U.

1980-01-01

At the end of the laboratory and pilot plant scale technological experiments, three main types of ore have been classified: (i) Kasar type: The ores consist of secondary uranium mineralization (autunite, meta-autunite and torbenite) in loosely consolidated sands, gravels and clays of Neogene Age. Heap leaching has been carried out on 100 and 1000 t ore samples (0.05% U 3 O 8 ) under economical conditions, such as 20 to 40 kg of H 2 SO 4 per tonne of ore at ambient temperature; original size -20 cm, solid/liquid ratio of 10, 20 days, and 90% recovery of uranium has been reached. The uraniferous solutions (1 to 2 g of U 3 O 8 per litre) obtained from the heap leaching operations were purified in a solvent extraction unit with a capacity of 100 ltr/h by using an Alamine 336-kerosene-decanol solution. The uranium in the purified and concentrated solutions (15 g of U 3 O 8 per litre) was then precipitated as a yellow cake with 65 to 75% U 3 O 8 content by means of magnesia milk. (ii) Tasharman type: No specific uranium mineral has been detected in the mineralogical determination, although uranium is disseminated in phosphate minerals as dahllite and apatite. Uranium in the ore has been leached under rather uneconomical conditions; 100 kg of H 2 SO 4 per tonne of ore, particle size -1 cm, 25 0 C, 30 days. In the SX-treatment of pregnant solutions phosphate ions, higher acidity than pH 1, and compounds formed as a chemical precipitation, hindered the SX-recoveries. In such cases, the addition of acid, dilution of pregnant solutions, membrane filtration, or 40 0 C temperature have been applied to decrease the uranium loss in the raffinate. (iii) Carbonate type: Even if alkaline leaching at 65 0 C, or leaching with 400 kg of H 2 SO 4 per tonne of ore, was carried out on -200 mesh ore samples, no acceptable uranium recoveries were obtained

Converting the Key Lake mill process for McArthur River ore

Energy Technology Data Exchange (ETDEWEB)

Rodgers, C. [McArthur River Operation, Cameco Corporation, Saskatoon, Saskatchewan (Canada)

2000-07-01

The Key Lake mill was commissioned in 1983 to process the two Key Lake ore deposits. With the depletion of these ore bodies in 1999, the plant was converted to mill the exceptionally rich McArthur River deposit located seventy eight kilometers northeast of the Key Lake mine site. This paper describes in detail the Key Lake milling process. The mill consists of a grinding circuit, a leach/counter current decantation circuit, a solvent extraction circuit, a yellowcake precipitation/calciner circuit, an ammonium sulphate crystallization circuit, and a waste treatment circuit. The paper also describes process changes to handle McArthur River ore, including the ore receiving station. (author)

Methods for the estimation of uranium ore reserves

International Nuclear Information System (INIS)

1985-01-01

The Manual is designed mainly to provide assistance in uranium ore reserve estimation methods to mining engineers and geologists with limited experience in estimating reserves, especially to those working in developing countries. This Manual deals with the general principles of evaluation of metalliferous deposits but also takes into account the radioactivity of uranium ores. The methods presented have been generally accepted in the international uranium industry

Novel Binders and Methods for Agglomeration of Ore

Energy Technology Data Exchange (ETDEWEB)

S. K. Kawatra; T. C. Eisele; K. A. Lewandowski; J. A. Gurtler

2006-12-31

Many metal extraction operations, such as leaching of copper, leaching of precious metals, and reduction of metal oxides to metal in high-temperature furnaces, require agglomeration of ore to ensure that reactive liquids or gases are evenly distributed throughout the ore being processed. Agglomeration of ore into coarse, porous masses achieves this even distribution of fluids by preventing fine particles from migrating and clogging the spaces and channels between the larger ore particles. Binders are critically necessary to produce agglomerates that will not break down during processing. However, for many important metal extraction processes there are no binders known that will work satisfactorily. Primary examples of this are copper heap leaching, where there are no binders that will work in the acidic environment encountered in this process, and advanced ironmaking processes, where binders must function satisfactorily over an extraordinarily large range of temperatures (from room temperature up to over 1200 C). As a result, operators of many facilities see a large loss of process efficiency due to their inability to take advantage of agglomeration. The large quantities of ore that must be handled in metal extraction processes also means that the binder must be inexpensive and useful at low dosages to be economical. The acid-resistant binders and agglomeration procedures developed in this project will also be adapted for use in improving the energy efficiency and performance of a broad range of mineral agglomeration applications, particularly heap leaching and advanced primary ironmaking. This project has identified several acid-resistant binders and agglomeration procedures that can be used for improving the energy efficiency of heap leaching, by preventing the ''ponding'' and ''channeling'' effects that currently cause reduced recovery and extended leaching cycle times. Methods have also been developed for iron ore

Radon risk in ore miners

International Nuclear Information System (INIS)

Beno, M.

1997-01-01

Underground workers are exposed to various clastogenic agents. One of these agents, radon, attracts attention of recent research as it causes lung cancer in the population occupationally exposed to its various concentrations especially in mine air of uranium mines or ore mines. This paper is a pilot study in which the numbers of chromosomal aberrations (CA) in lymphocytes of ore mines (Nizna Slana-iron ore, Hnusta-talc ore) located in east central Slovakia were followed and related to the lifetime underground radon exposure and to lifetime smoking. Seventy miners volunteering after an informed consent served as donors of venous blood. Twenty healthy pro-bands, age matched with the miners, which never worked underground (mostly clerks) served as donors of control blood samples. The exposure to radon and smoking has been estimated according to working-records and personal anamnesis. The findings unequivocally showed a small but statistically significant clastogenic effect of the exposure to underground environment of the mines concerned. This study has shown also a small but significant influence of smoking, which in the subgroup of miners working underground less than 1500 shifts may have acted synergically with the underground exposure. It was concluded tat: (1) Significantly higher counts of chromosomal aberrations in lymphocytes of 70 miners than in an age matched control group of 20 white-collar workers were found; (2) The higher counts of chromosomal aberrations could be ascribed to underground exposure of miners and to smoking; (3) The positive dependence of the number of chromosomal aberrations from the exposure to smoking was loose and it was expressed by significantly higher chromosomal aberrations counts in the group of miners working less than 1500 shifts underground; (4) A dependence of chromosomal aberrations counts from the exposure to radon could not be assessed. At relatively low numbers of pro-bands in subgroups it was not ruled out the confounding

Mining and processing of uranium ores in the USSR

International Nuclear Information System (INIS)

Laskorin, B.N.; Mamilov, V.A.; Korejsho, Yu.A.

1983-01-01

Experience gained in uranium ore mining by modern methods in combination with underground and heap leaching is summarized. More intensive processing of low-grade ores has been achieved through the use of autoclave leaching, sorptive treatment of thick pulps, extractive separation of pure uranium compounds, automated continuous sorption devices of high efficiency for processing the underground- and heap-leaching liquors, natural and mine water, and recovery of molybdenum, vanadium, scandium, rare earths and phosphate fertilizers from low-grade ores. Production of ion-exchangers and extractants has been developed and processes for concomitant recovery of copper, gold, ionium, tungsten, caesium, zirconium, tantalum, nickel and cobalt have been designed. (author)

Influence of Stockpile Angle in Natural Drying of Laterite Ore

Directory of Open Access Journals (Sweden)

Yoalbys Retirado-Mediaceja

2016-10-01

Full Text Available Natural drying is performed at Cuban nickel plants by depositing bulk ore in the open. The ore is currently being stockpiled without much consideration for the impact of the drying surface angle on the process power behavior. Simulations were carried out in this investigation, which prove that an increased triangular stockpile angle considerably reduces natural drying efficiency. A 45 sexagesimal degree angle to the horizontal plane results in exposure of a large volume of ore to natural drying and guarantees adequate energy performance.

Natural galvaniv effect when bed-oxidation ore-bearing zone forming

International Nuclear Information System (INIS)

Shchetochkin, V.N.; Kislyakov, Ya.M.; Vasil'eva, Eh.G.

1995-01-01

Hypothesis of the essential role of natural galvanic process in exogenetic-epigene ore-formation the model of which was elaborated earlier, is grounded. Genetic conjuction of variations near geochemical barrier of redox and acidic-alkaline hydrogeochemical parameters is stated. These variations in total enable to understand the mechanism of formation of infiltration uranium mineralizatiuon, to explain a number of the observed peculiarities of oxidation ore-controlling zoning, and to explain, as well, slightly-expressed concentration of elements-hydrolyzates in uranium ores. 29 refs.; 6 figs.; 3 tabs

Iron-ore resources of the United States including Alaska and Puerto Rico, 1955

Science.gov (United States)

Carr, Martha S.; Dutton, Carl E.

1959-01-01

The importance of iron ore, the basic raw material of steel, as a fundamental mineral, resource is shown by the fact that about 100 million long tons of steel is used annually in the economy of the United States, as compared with a combined total of about 5 million long tons of copper, lead, zinc, and aluminum. Satisfying this annual demand for steel requires about 110 million tons of iron ore and 70 million tons of scrap iron and steel. The average annual consumption of iron ore in the United States from 1951 to 1955, inclusive, was about 110 million long tons, which is about twice the annual average from 1900 to 1930. Production of iron ore in the United States in this 5-year period averaged approximately 100 million long tons annually, divided by regions as follows (in percent): Lake Superior, 84.1; southeastern, 6.7; western, 6.7; northeastern, 1.4; and central and gulf, 1.1. Mining of iron ore began in the American Colonies about 1619, and for 225 years it was limited to eastern United States where fuel and markets were readily available. Production of iron ore from the Lake Superior region began in 1846; the region became the leading domestic source by 1890, and the Mesabi range in Minnesota has been the world's most productive area since 1896. Proximity of raw materials, water transportation, and markets has resulted in centralization of the country's iron and steel industry in the lower Great Lakes area. Increased imports of iron ore being delivered to eastern United States as well as demands for steel in nearby markets have given impetus to expansion in the steel-making capacity in this area. The four chief iron-ore minerals - hematite, liminite, magnetite, and siderite - are widely distributed but only locally form deposits of sufficient tonnage and grade to be commercially valuable at the present time. The iron content of these minerals, of which hematite is the most important, ranges from 48 percent in siderite to 72 percent in magnetite, but as these

Genesis of iron-apatite ores in Posht-e-Badam Block (Central Iran ...

Indian Academy of Sciences (India)

Central Iran; iron-apatite ore; Kiruna-type; Posht-e-Badam Block; REE geochemistry. J. Earth Syst ... ferent ore genesis models have been proposed for ...... volatile-rich magma systems stress the important .... Laco magnetite flow deposits, northern Chile: An up-to- ... economic report on iron ore prevision of the Esfahan steel.

Juuru Mihkli Kiriku Oreli Fond võttis endale uue ülesande / Tauno Kibur

Index Scriptorium Estoniae

Kibur, Tauno

2009-01-01

Oreli fond on võtnud ülesandeks restaureerida koguduse ajalooline pastoraat. Hoone eskiisi tegi Raivi Juks. Oreli restaureerimist ja tulemust jääb fikseerima Juuru oreli plaat, mille muusikapalad mängis sisse Kristel Aer

Helium and deuterium permeability in O-rings

International Nuclear Information System (INIS)

Lakner, J.F.

1976-01-01

To obtain more information on gas permeation through elastomeric O-rings, studies were performed on Parker Seal Company O-rings, Nos. 2-113, 2-006, 3-904, and 3-906, all made of a nitrile rubber. Also included in the tests was a valve packing (Autoclave Engineers) encased in AE Valve 20A-2142. Permeation experiments were run usually in duplicate to 82.7 MPa (12,000 psi) with helium and deuterium at room temperature. The data are extrapolated to give values for tritium

Microbial Beneficiation of Salem Iron Ore Using Penicillium purpurogenum

Science.gov (United States)

Mishra, M.; Pradhan, M.; Sukla, L. B.; Mishra, B. K.

2011-02-01

High alumina and silica content in the iron ore affects coke rate, reducibility, and productivity in a blast furnace. Iron ore is being beneficiated all around the world to meet the quality requirement of iron and steel industries. Choosing a beneficiation treatment depends on the nature of the gangue present and its association with the ore structure. The advanced physicochemical methods used for the beneficiation of iron ore are generally unfriendly to the environment. Biobeneficiation is considered to be ecofriendly, promising, and revolutionary solutions to these problems. A characterization study of Salem iron ore indicates that the major iron-bearing minerals are hematite, magnetite, and goethite. Samples on average contains (pct) Fe2O3-84.40, Fe (total)-59.02, Al2O3-7.18, and SiO2-7.53. Penicillium purpurogenum (MTCC 7356) was used for the experiment . It removed 35.22 pct alumina and 39.41 pct silica in 30 days in a shake flask at 10 pct pulp density, 308 K (35 °C), and 150 rpm. In a bioreactor experiment at 2 kg scale using the same organism, it removed 23.33 pct alumina and 30.54 pct silica in 30 days at 300 rpm agitation and 2 to 3 l/min aeration. Alumina and silica dissolution follow the shrinking core model for both shake flask and bioreactor experiments.

Microcontroller based, ore grade measuring portable instruments for uranium mining industry

International Nuclear Information System (INIS)

Dheeraj Reddy, J.; Narender Reddy, J.

2004-01-01

Ore Face Scanning and Bore Hole Logging are important essential activities which are required to be carried out in any Uranium mining industry. Microcontroller based, portable instruments with built-in powerful embedded code for data acquisition (of Radiation counts) and Ore Grade calculations will become a handy measuring tool for miners. Nucleonix Systems has recently developed and made these two portable instruments available to UCIL, which are under use at Jaduguda and Narvapahar mines. Some of the important features of these systems are compact, light weight, portable, hand held, battery powered. Modes of Data Acquisition: CPS, CPM and ORE GRADE. Detector: Sensitive GM Tube. Choice of Adj. TC (Time Constant) in 'ORE GRADE', acquisition mode. Built-in automatic BG (Background) recording and subtraction provided to indicate net CPS, CPM or ore GRADE in PPM. Can store 1000 readings at users choice. Built-in RS232 serial port facilitates data downloading into PC. This paper focuses on design concepts and technical details for the above two products. (author)

Characteristics of Crushing Energy and Fractal of Magnetite Ore under Uniaxial Compression

Science.gov (United States)

Gao, F.; Gan, D. Q.; Zhang, Y. B.

2018-03-01

The crushing mechanism of magnetite ore is a critical theoretical problem on the controlling of energy dissipation and machine crushing quality in ore material processing. Uniaxial crushing tests were carried out to research the deformation mechanism and the laws of the energy evolution, based on which the crushing mechanism of magnetite ore was explored. The compaction stage and plasticity and damage stage are two main compression deformation stages, the main transitional forms from inner damage to fracture are plastic deformation and stick-slip. In the process of crushing, plasticity and damage stage is the key link on energy absorption for that the specimen tends to saturate energy state approaching to the peak stress. The characteristics of specimen deformation and energy dissipation can synthetically reply the state of existed defects inner raw magnetite ore and the damage process during loading period. The fast releasing of elastic energy and the work done by the press machine commonly make raw magnetite ore thoroughly broken after peak stress. Magnetite ore fragments have statistical self-similarity and size threshold of fractal characteristics under uniaxial squeezing crushing. The larger ratio of releasable elastic energy and dissipation energy and the faster energy change rate is the better fractal properties and crushing quality magnetite ore has under uniaxial crushing.

Practice and prospect on bioleaching of uranium ore in China

International Nuclear Information System (INIS)

Liu Jian; Fan Baotuan; Meng Yunsheng; Zheng Ying; Liu Chao; Zhou Lei

2008-01-01

Developing situation on bioleaching of uranium ore in China is introduced. The selection and domestication of bacteria, development and application of biocntact oxidation tank, and practice on bioleaching of uranium ore in China are retrospeted and prospected. (authors)

Development of Technology for Enrichment of Silver Containing Ores

Science.gov (United States)

Shekiladze, Asmati; Kavtelashvili, Otari; Bagnashvili, Mamuka

2016-10-01

The progress of Georgian economics is substantially associated with a development of new deposits of mineral resources. Among them is the David-Gareji deposit where at present the intensive searching geological works are performed. The work goal involves the elaboration of the technology for processing of silver-containing quartz-barite ores. Without its development the mining of more valuable gold-polymetallic ores is impossible. Because of ore complexity silver and barite are considered in a common technological aspect. The investigations were carried out on the representative samples of quartz-barite ores containing 78-88 g/ton of silver and 27-29 % of silver is a nugget in the form of the simple sulphides and chlorides. The ore is characterized by fine coalescence of barite and ore-generating minerals. Non-ferrous metals haven't any industrial value because of their very low content. Therefore, for the processing of the ores under study the direct selective scheme of flotation enrichment was chosen and the formula of optimal reagent regime was elaborated. Potassium xanthogenate is used as a collector for flotation of silver minerals and pine oil- as a foaming agent. The effect of the pulp - pH and medium temperature on silver flotation was studied. It was established that the silver is actively floats in neutral medium. For barite flotation the various collectors were tested: sulfidezid cotton oil-soap stock, soaps of fatty acids and alkyl sulphates of C12 - C16 row, among the “Baritol” is the most efficient one. Depression of the barren rock was carried out by liquid glass in alkaline medium. The effect of pulp pH on barite flotation has been investigated. The best results were obtained at pH=8.5. The increase of the pulp alkalinity has no essential effect on the indexes of the barite enrichment. Conditional concentrate of the barite is obtained by two fold purification of the main flotation concentrate by the addition of the liquid glass to the re

Beneficiation studies of Bajaur manganese ore by different processing techniques

International Nuclear Information System (INIS)

Riaz, M.; Khan, F.U.; Yamin, A.; Bilquees, R.; Muhammad, N.

2010-01-01

The manganese ore of Bajaur Agency of Pakistan was subjected to flotation, heavy medium separation, gravity concentration and magnetic separation techniques for beneficiation. The original composition of the manganese ore was 45.56% Mn , 4% Fe/sub 2/O/sub 3/, 40% SiO/sub 2/. The Mn content was raised to a maximum 48.76 % in the concentrate with the recovery of 67.78 % through flotation technique. Other techniques rendered marginal increase in Mn concentration against the theoretical possibility of substantial enrichment by rejecting the 20 % gangue minerals. The separation of manganese minerals from associated gangue was difficult, due to mineralogical complexity of the ore, extreme fineness of the particle size, texture and minerals intergrowth. High Mn/Fe ratio, phosphorus, and silica contents were within tolerable limits for utilisation of the ore in ferro-manganese production. (author)

Assessment of the contrast of rare metal ores

International Nuclear Information System (INIS)

Kuznetsova, O.V.

1987-01-01

The method of rapid assessment of useful component content on the basis of X-ray radiometric method of analysis of non-crushed ore lumps is presented. Using as an example rare metal deposits, linear dependence between logarithms of Nb 2 O 6 contents and the value of fragment separation index during radiometric separation is established. The use of the dependence ensures sufficient accuracy for the characteristic of rare metal ore content

Ore bearing system and hydrological characteristics of mineralized sector in Hushiliang area

International Nuclear Information System (INIS)

Zhang Zhaolin; Liu Zhengbang; Miao Aisheng

2010-01-01

Hushiliang area is one of the best uranium ore bearing areas in Erdos basin from the point of fluvial sedimentary system and uranium geochemical environment, So far, three mineralized sector has been found that are Nalingou, Nongshengxin, Baobeigou. By using the first-hand data of uranium regional survey in this area lately and systematically comparing and analyzing of the hydrological structure in the mineralized sector of this area, the thesis ascertain the ore and water bearing fluid reservoir's spatial relationship generally, and argues that the Zhiluo formation ore and water bearing fluid reservoir in this area is a unified underwater ore bearing system, and the orebody's hydrological structure is propitious in the distributary channel and unpropitious in the main channel because of deep ore bearing layer to the ISL. (authors)

Technology of Polish copper ore beneficiation – perspectives from the past experience

Directory of Open Access Journals (Sweden)

Wieniewski Andrzej

2016-01-01

Full Text Available The paper describes the main types of existing copper deposits in the world and the most common enrichment technologies. The characteristic elements of the current flowsheet of the Polish ore beneficiation were discussed together with the reasons for using them. The paper presents a perspective flowsheet based on more than 50-years of experience in beneficiation of Polish copper ore. The main elements of proposed technology are: leaving in justified cases the division of ore into fractions of increased sandstone and carbonate ores content, flotation in the milling circuit as part of the effective preparation of the ore to rougher flotation, intensive rougher flotation, classic cleaning system, processing of the middlings with grinding system in new type mills, classification and flotation with outlet of final tailings.

Geology and ore fluid geochemistry of the Jinduicheng porphyry molybdenum deposit, East Qinling, China

Science.gov (United States)

Li, Hongying; Ye, Huishou; Wang, Xiaoxia; Yang, Lei; Wang, Xiuyuan

2014-01-01

Jinduicheng deposit is a giant Mesozoic porphyry Mo system deposit in the East Qinling molybdenum belt, Shaanxi Province, China. The mineralization is associated with the I-type Jinduicheng granite porphyry. Both the porphyry stock and country rocks underwent intense hydrothermal alteration. The alteration, with increasing distance from the parent intrusion, changes from silicification, through potassic and phyllic assemblages, carbonation, to propylitic assemblages. Molybdenite, the dominant ore mineral, occurs in veinlets, most of which are hosted by the altered country rocks, with less than 25% of the ore in the porphyry body. The hydrothermal system comprises four stages, including pre-ore quartz and K-feldspar; two ore stages of quartz, K-feldspar, molybdenite, and Pb- And Zn-bearing sulfides; and post-ore quartz and carbonate. Six main types of primary fluid inclusions are present in hydrothermal quartz, including two-phase aqueous, one-phase aqueous, three-phase CO2-bearing, CO2-dominated fluid inclusions, gas inclusions, and melt inclusions. The homogenization temperatures of fluid inclusions range from 210 to 290 °C in the pre-ore stage, 150-310 °C in ore stage I, 150-360 °C in the ore stage II, and 195-325 °C in the post-ore stage quartz. Estimated salinities of the ore-forming fluids range from 6.9 to 13.5, 4.3 to 12.3, 6.2 to 12.4, and 3.4 to 9.9 wt.% NaCl equiv. in stages 1-4, respectively. The δ34S values of pyrite in the two ore stages range from 2.8‰ to 4.3‰, whereas the δ34S values of molybdenite range from 2.9‰ to 6.2‰. The data suggest both magmatic and crustal sources of sulfur. The δD and δ18O values for the hydrothermal fluids are -57.2‰ to -84.4‰ and 8.0‰ to -3.2‰, respectively. The fluid inclusion and stable data indicate that the pre-ore hydrothermal fluids were mostly of magmatic origin, but the fluids responsible for ore deposition were mixed magmatic and meteoric, and eventually meteoric water dominated the system

INAA of Zn and impurity elements in Zn ores and concentrates

International Nuclear Information System (INIS)

Op de Beeck, J.; De Norre, L.; Hoste, J.

1985-01-01

The present work concerns the analysis of zinc ores and concentrates. In the first place a procedure for the routine determination of fluorine in Zinc sulfide ores has been developed, based on activation with the fast neutrons of the isotope source. In the second place a procedure for the routine determination of Cadmium in Zinc ores has been developed and finally the routine determination of Zinc itself is at present being completed

Application of biohydrometallurgy to uranium ore processing

International Nuclear Information System (INIS)

Zhang Jiantang

1989-01-01

The development on application of biohydrometallargy to uranium ore processing is briefly introduced. The device designed for oxidizing ferrous ions in solution by using biomembrane, several bacterial leaching methods and the experimental results are given in this paper. The presented biohydrometallurgical process for recovering uranium includes bacterial leaching following by adsorption using tertiary amine resin 351 and oxidation of ferrous ions in the device with biomembranes. This process brings more economical benefits for treating silicate type original ores. The prospects on application of biogydrometallyurgy to solution mining is also discussed

Ore-processing technology and the uranium supply outlook

International Nuclear Information System (INIS)

James, H.E.; Simonsen, H.A.

1978-01-01

The subject is covered in sections, as follows: the resource base (uranium content of rocks, regional distribution of Western World uranium); ore types (distribution of Western World uranium, by ore types, response to ore-processing); constraints on expansion in traditional uranium areas (defined for this paper as the sandstone deposits of the U.S.A. and the quartz-pebble conglomerates of the Witwatersrand and Elliot Bay areas, all other deposits being referred to as new uranium areas). Sections then follow dealing in detail with the processing of deposits in U.S.A., South Africa, Canada, Niger, Australia, South West Africa, Greenland. More general sections follow on: shale, lignite and coal deposits, calcrete deposits. Finally, there are sections on: uranium as a by-product; uranium from very low-grade resources; constraints on expansion rate for production facilities. (U.K.)

Chapter 1. The characteristics of borosilicate ores of Ak-Arkhar Deposit of Tajikistan

International Nuclear Information System (INIS)

Mirsaidov, U.M.; Kurbonov, A.S.; Mamatov, E.D.

2015-01-01

Present article is devoted to characteristics of borosilicate ores of Ak-Arkhar Deposit of Tajikistan. The chemical composition of danburite ore of Ak-Arkhar Deposit was defined. The chemical composition of danburite ore concentrate of Ak-Arkhar Deposit was defined as well.

Environmentally Benign, Rapid, and Selective Extraction of Gold from Ores and Waste Electronic Materials.

Science.gov (United States)

Yue, Chunlin; Sun, Huaming; Liu, Wen-Jing; Guan, Binbin; Deng, Xudong; Zhang, Xu; Yang, Peng

2017-08-01

The extraction of gold from ores and electronic waste is an important topic worldwide, as this precious metal has immense value in a variety of fields. However, serious environmental pollution and high energy consumption due to the use of toxic oxidation reagents and harsh reaction conditions is a well-known problem in the gold industry. Herein, we report a new chemical method based on the combined use of N-bromosuccinimide (NBS) and pyridine (Py), which has a greatly decreased environmental impact and reagent cost, as well as mild reaction requirements. This method can directly leach Au 0 from gold ore and electronic waste to form Au III in water. The process is achieved in a yield of approximately 90 % at room temperature and a nearly neutral pH. The minimum dose of NBS/Py is as low as 10 mm, which exhibits low toxicity towards mammalian cells and animals as well as aquatic creatures. The high leaching selectivity of Au over other metals during gold leaching is demonstrated, showing that this method has great potential for practical industrial application towards the sustainable refining of gold from ores and electronic waste. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Uranium extraction from ores with salicylic acid; I - uranium extraction from input phosphate ore of Abu Zaabal phosphate plant, Egypt

International Nuclear Information System (INIS)

Hussein, E.M.

1997-01-01

Salicylic acid has been tested (for environmental importance) to extract U from input phosphate ore of Abu-Zaabal phosphate plant, Egypt prior to its processing for production of phosphatic fertilizers. Uranyl ion forms with this acid three stable complexes; namely [UO 2 Sal] degree, [U O 2 SaL 2 ] 2- and UO 2 SaL-3] 4- depending on the total uranyl and salicylic acid concentrations and their ratios. Study of relevant extraction factors revealed however that, the extraction process is controlled by the amount of salicylic acid used, alcohol/aqueous ratio, solid/liquid ratio and time of agitation. The obtained results showed that uranium is selectively leached by the application of such a leaching reagent. In order to recover U from the obtained pregnant leach liquor, the latter is adjusted by ammonia to PH 5-6.5, where the crystalline pp t of N H 4 [UO 2 SaL 3 ] 4 H 2 O has formed. This precipitation has been carried out after concentrating the obtained pregnant leach liquor by its recycle for U extraction from new ore batches. The precipitated ammonium uranyl tri salicylate is calcined at 500 degree C for obtaining pure orange yellow trioxide (UO 3 ) powder. On the basis of one ton ore treatment, an economic flowsheet for U recover y from the study ore material has been suggested

Geochemistry and the origin of the Mamouniyeh iron ore-terra rossa deposit, Markazi Province - Iran

Directory of Open Access Journals (Sweden)

Marziyeh Mahboubiyan Fard

2017-11-01

Full Text Available Introduction Iron is among the metals whose ore deposits are not confined to a specific geologic period of crustal formation and they have formed in various geologic environments during previous periods (Ghorbani, 2007. About 95% of iron ore deposits have sedimentary origin and have formed due to chemical deposition from ancient sea water. The remaining percent is the result of alteration and magmatic activities (Gutzmer and Beukes, 2009. In sedimentary environments, a large amount of sedimentary iron minerals have formed resulting in different iron facies. Iron oxide facies are of the most important facies (James, 1954. The most important Iranian iron deposits are located in Central Iran, Sanandaj- Sirjan and East Iran zones, and the Kordestan area (Ghorbani, 2007. In the Orumiyeh-Dokhtar Zone, many iron ore deposits have been formed in conjunction with granitic and granodioritic plutons related to Oligocene-Miocene plutonic and volcanic activities (Hoshmandzadeh, 1995. The Mamouniyeh iron ore-terra rossa deposit is located in the Orumiyeh-Dokhtar volcanic zone. Iron mineralization have occurred in trachytic-trachyandesitic lavas and pyroclastic rocks of Pliocene age. Materials and methods A total of 28 rock samples were picked up from ore and host rocks during field observations. Petrographical and mineralogical studies were performed on 15 thin sections of ore and host rocks. XRD studies were performed on 3 ore samples. In order to investigate the geochemistry of the ore, 10 samples were analyzed for major, trace and rare earth elements (REEs using the ICP-MS method. Result Field and mineralogical studies reveal that the ore is composed of hematite along with crypto-crystalline silica as alternating layers of various thickness and color. The existence of alternating layers of hematite and quartz implies that the ore is similar to banded iron formations, but on a smaller scale, related to submarine hydrothermal activities. Silica is found as

Determination of uranium concentration in an ore sample using laser-induced breakdown spectroscopy

International Nuclear Information System (INIS)

Kim, Y.-S.; Han, B.-Y.; Shin, H.S.; Kim, H.D.; Jung, E.C.; Jung, J.H.; Na, S.H.

2012-01-01

Laser-induced breakdown spectroscopy (LIBS) has been recognized as a promising technique for analyzing sensitive nuclear materials such as uranium, plutonium, and curium in a high-radiation environment, especially since the implementation of IAEA (International Atomic Energy Agency) safeguards. The uranium spectra of ore samples were quantitatively analyzed prior to analyzing sensitive materials in the nuclear industry. The purpose of this experiment is to extract quantitative information about the uranium in a uranium ore using a standard addition approach. The uranium ore samples containing different concentrations of U were prepared by mixing raw ore powder with natural uranium oxide powders. Calibration sets of 0.2, 0.4, 0.6, 0.8 and 1.0 wt.% uranium concentrations within the uranium ore sample were achieved. A pulsed and Q-switched Nd:YAG laser at a wavelength of 532 nm was used as a light source. An echelle spectrometer that covers a 190–420 nm wavelength range is used to generate a calibration curve and determine the detection limit of uranium in the ore matrix. The neutral atomic-emission peak at a wavelength of 356.659 nm indicated a detection limit of ∼ 158 ppm for uranium, and the uranium concentration was determined in a raw ore sample that has an unknown quantity of uranium. - Highlights: ► The feasibility of LIBS application to monitor uranium element was carried out. ► The detection limit of U in ore was determined by a standard additional approach. ► Quantitative analyses of U concentration in a natural uranium ore were performed.

Chemical mining of primary copper ores by use of nuclear technology

Energy Technology Data Exchange (ETDEWEB)

Lewis, A E [Lawrence Radiation Laboratory, University of California, Livermore, CA (United States)

1970-05-15

Chemical mining of primary copper ores, with nuclear explosives to break the ore and in-situ hydrostatic pressure to accelerate dissolution of primary ore minerals, may be feasible. A contained nuclear explosion well below the water table would be used to provide a mass of broken ore in a flooded 'chimney'. The hydrostatic pressure in the chimney should increase the solubility of oxygen in a water-sulfuric acid system enough to allow primary copper minerals such as chalcopyrite and bornite to be dissolved in an acceptably short time. Circulation and collection would be accomplished through drill holes. This method should be especially applicable to the deep portions of porphyry copper deposits that are not economical to mine by present techniques. (author)

Introduction - Acid decomposition of borosilicate ores

International Nuclear Information System (INIS)

Mirsaidov, U.M.; Kurbonov, A.S.; Mamatov, E.D.

2015-01-01

The complex processing of mineral raw materials is an effective way for the extraction of valuable components. One of these raw materials are borosilicate ores from which the boric acid, aluminium and iron salts and building materials can be obtained. In the Institute of Chemistry of the Academy of Sciences of the Republic of Tajikistan the flowsheets of the processing of borosilicate raw materials by acid and chloric methods were elaborated. The acid methods of decomposition of borosilicate ores of Ak-Arkhar Deposit were considered in present monograph. The carried out researches on elaboration of physicochemical aspects and technological acid methods allowed to define the optimal ways of extraction of valuable products from borosilicate raw materials of Tajikistan.

[Assessment of Soil Fluorine Pollution in Jinhua Fluorite Ore Areas].

Science.gov (United States)

Ye, Qun-feng; Zhou, Xiao-ling

2015-07-01

The contents of. soil total fluorine (TF) and water-soluble fluorine (WF) were measured in fluorite ore areas located in Jinhua City. The single factor index, geoaccumulation index and health risk assessment were used to evaluate fluorine pollution in soil in four fluorite ore areas and one non-ore area, respectively. The results showed that the TF contents in soils were 28. 36-56 052. 39 mg.kg-1 with an arithmetic mean value of 8 325.90 mg.kg-1, a geometric mean of 1 555. 94 mg.kg-1, and a median of 812. 98 mg.kg-1. The variation coefficient of TF was 172. 07% . The soil WF contents ranged from 0. 83 to 74. 63 mg.kg-1 with an arithmetic mean value of 16. 94 mg.kg-1, a geometric mean of 10. 59 mg.kg-1, and a median of 10. 17 mg.kg-1. The variation coefficient of WF was 100. 10%. The soil TF and WF contents were far higher than the national average level of the local fluorine epidemic occurrence area. The fluoride pollution in soil was significantly affected by human factors. Soil fluorine pollution in Yangjia, Lengshuikeng and Huajie fluorite ore areas was the most serious, followed by Daren fluorite ore area, and in non-ore area there was almost no fluorine pollution. Oral ingestion of soils was the main exposure route. Sensitivity analysis of model parameters showed that children's weight exerted the largest influence over hazard quotient. Furthermore, a significant positive correlation was found among the three kinds of evaluation methods.

Acid curing and baking of bastnasite ore and concentrate

International Nuclear Information System (INIS)

Topkaya, Y.; Akkurt, S.

1998-01-01

Full text: In this study, the hydrometallurgical evaluation of a rare earth ore as well as a concentrate obtained from this was done at laboratory. For the mentioned study, a bastnasite type rare earth ore located in Beylikahir in Turkey was used. The total rare earth oxide (REO) content of the deposit was estimated to be 1 million tons with an average concentration of 3.42%REO. The rare earths were contained in bastnasite mineral. The other constituents of the ore were calcium fluoride (52.5%), barite (25.4%), calcite (2.8%) and minor amounts of thorium, iron, manganese, etc. The bastnasite mineral occurred either as cement material between fluoride and barite particles or as intimately associated with these minerals. The rare earth elements were enriched considerably in sub-sieve sizes. After extensive research about the physical concentration of this ore, two different metallurgical routes were followed for the extraction of REE from the ore itself or the preconcentrate obtained by attrition scrubbing and desliming by cyclones. In order to increase the grade of the concentrate, upgrading of the preconcentrate by multigravity was also tried. The two metallurgical routes tested were: Sulphuric acid curing and water leaching; Sulphuric acid baking and subsequent water leaching. The results of the leaching experiments were found to be quite promising. Leach recoveries up to 90% were easily obtainable. In the case of acid baking, hydrofluoric acid recover as a by-product was also possible

The North American iron ore industry: a decade into the 21st century

Science.gov (United States)

Jorgenson, John D.; Perez, A. A

2011-01-01

During the 20th century, the iron ore mining industries of Canada and the United States passed through periods of transformation. The beginning of the 21st century has seen another period of transformation, with the failure of a number of steel companies and with consolidation of control within the North American iron ore industry. Canadian and United States iron ore production and the market control structure involved are changing rapidly. Consolidation of ownership, formation of foreign joint ventures, divestitures of upstream activities by steelmakers, and industry changes to ensure availability of feedstocks all played a role in recent developments in the North American iron ore industry. Canadian and U.S. iron ore operations and their strong linkage to downstream production, although isolated, must also be considered within the context of the changing global economy. Projects using new technology to produce direct reduced iron nuggets of 96-98% iron content and other projects designed to produce steel at minesites may once again change the face of the iron ore industry. Social and environmental issues related to sustainable development have had a significant effect on the North American iron ore industry.

Contact mechanical analysis of O-ring stresses

Energy Technology Data Exchange (ETDEWEB)

Kim, Hyung Kyu

2007-02-15

The purpose of this project is to develop the approximate solutions of contact traction and internal stress of an O-ring by using a two dimensional elasticity for enhancing the design and failure prediction technology. Investigated were the applicability of Lindley's formulae of contact force prediction and the Hertz theory. Three cases of O-ring installation were considered. The approximate solution of contact tractions and internal stresses of each case were derived. The key results are summarized as follows: 1. It is verified that Lindley's formulae predicts the relationship between the fractional compression and contact force. 2. In the case of Case I, II and III without internal pressure, it is found that a function form of the contact traction is the Hertzian. So it is possible to express the traction with a Hertzian form and correction factors. 3. The internal stresses are derived in the case of the Hertzian traction profile. The stresses at the center of O-ring show a satisfactory result when compared with the finite element result.

Radon and Thoron emanation testwork on Nolans Rare Earths ores

International Nuclear Information System (INIS)

Sonter, Mark; Grose, Jeremy

2016-01-01

This paper reports on a series of experiments performed on two bulk ore samples for Arafura Resources' Nolans Rare Earths project, intended to derive information on radon (Rn222) and thoron (Rn220) emanation rates (fluxes) under various circumstances. This data is needed to enable development of predictions of Rn and Tn releases from exposed mine bench ore, ore stockpiles, and tailings, and thus assist in estimation of airborne concentrations within the areas of the future Mine and Processing plant. In turn these estimates will provide guidance on the quantitative risk and the necessity or otherwise of invoking specific control measures, either in design or in operating procedures. This testwork was carried out during the period 2nd to 15th July, at Arafura's Winnellie facility in Darwin. Conclusions are that for uncrushed ore, Rn flux numbers are around 1.0Bq/m"2/s, Tn numbers appear to cluster around 200-300 Bq/m"2/s. Crushing gave no change in Rn flux, Tn flux was doubled for calc-silicate material. Wetting gave significant reductions for both Rn and Tn for ores sampled, and clay capping reduced Rn flux marginally but Tn was reduced by a factor of 100.

Microbial leaching of low grade sandstone uranium ores: column leaching studies

International Nuclear Information System (INIS)

Bhatti, T.M.; Malik, K.A.; Khalid, A.M.

1991-01-01

Microbial leaching studies on a low-grade sandstone uranium ore from Baghalchur Ore Deposits, D. G. Khan, Pakistan, containing 0.027 % U/sub 3/O/sub 8/ for extraction of uranium, were conducted in columns. Baghalchur sandstone uranium ore which is alkaline in nature, contained 5.0% calcite [CaCo/sub 3/], 2-3 % Fe/sub 2/O/sub 3/ and pyrite [FeS/sub 2/] less than 0.1 %. The ore amended with sulfur and/or sulfur slag as external energy source was found to leach with indigenous microflora mostly belonging to the genus Thiobacillus which are present in the uranium mine water. Column leaching studies revealed that when the ore was amended with elemental sulfur and irrigated with mine water (pH 3.5) 53 % U/sub 3/O/sub 8/ could be solubilized from it. However, when the natural mine water was used as such (pH 7.4) the solubilization of uranium was decreased to 41 % U/sub 3/O/sub 8/ in 90 days under similar conditions of percolation rate and temperature. The addition of (NH/sub 4/)/sub 2/SO/sub 4/ (3.0 g/L) in mine water was found to enhance the uranium leaching to 70 % U/sub 3/O/sub 8/ from the columns containing ore amended with sulfur slag. (author)

Replacement of lumpy chrome ore by agglomerated ore concentrates and lowering of specific power consumption and improvement of Cr-yield by means of improved slag composition in the production of H.C. Ferrochrome

International Nuclear Information System (INIS)

Retelsdorf, H.J.; Fichte, R.; Breuer, F.; Zimmermann, H.

1982-06-01

Work on this project is finished, but further work on the use of Cr-ore briquettes seems necessary. It was the aim of the project to develop improved slag compositions for the FeCr 4-6% C-process resulting in higher Cr-yield and lower specific power consumption. Furthermore, replacement of lumpy ore in the charge by agglomerated Cr-ore-fines or concentrates in the form of pellets and briquettes was to be tested. Experimentals were performed in a 70 kW and a 300 kW arc furnace. Two different slag compositions were tested. The high-MgO slag type proved suitable. The specific power consumption and the Cr-yield depend to a large extent on the type of Cr-ore and on the agglomeration process. Cr-ore pellets can be used up to 65% in the ore charge but briquettes can be used only up to 25% to replace lumpy ores without causing higher Cr-losses in the slag. (orig.) [de

The Technological Mineralogical Research of Molybdenum in Skarn-type Ore of Huangshaping Polymetallic Mining Area, Hunan, China

Science.gov (United States)

Liu, W. H.; Pan, J. Y.

2017-10-01

Huangshaping is one of the most important polymetallic deposits in the south of Hunan Province. Through field investigation, chemical analysis, observation under the optical microscope, energy spectrum analysis of the SEM and X-ray diffraction, the author made a technological mineralogical research of molybdenum on skarn-type ore, and the result shows that the ore containing molybdenum is mainly on the contact of the granite porphyry and the impure limestone in the lower carboniferous Shidengzi group. Besides molybdenum, the ore minerals contain scheelite, native bismuth, bismuthinite, magnetite and so on; and the gangue minerals are mainly andradite, fluorite and wollastonite. Part of the molybdenum exists in the scheelite in form of isomorphism, and there is an obvious negative correlation between MoO3 and WO3. The molybdenite granularity is mainly located in the 0.04~ 0.08mm area, which accounts for 29.5% of the total and is the finely disseminated ore. For samples of 70%, 90%, and 100% with the particle size of more than 200 meshes, the maximum recovery of the molybdenite are 75.15%, 86.45% and 91.25% respectively. So there will be a better use of molybdenum if we properly improve the grinded particle size of the comprehensive samples. As part of the molybdenum is distributed in the scheelite lattice, the actual recovery rate in this area may decline compared with the ideal value.

Production of Schwarzmoeller briquets from weakly caking black coal and iron ore

Energy Technology Data Exchange (ETDEWEB)

Naundorf, W.

1986-01-01

Laboratory production is explained of coal and iron ore briquets suitable for metallurgy, using type 33 weakly caking black coal, iron ore concentrates from 3 Soviet mines and sulfite lye as binder. Coal and ore were finely ground to 0.3/0.0 mm grain size, briquetted at high pressure of 150 MPa and at 80 C temperature. The sulfite lye binder content ranged from 4 to 10% in the briquet mixture. Briquets were thermally treated up to 1000 C; the resulting coke lumps (Schwarzmoeller briquets) were analyzed for compression and abrasion strength. Detailed graphs of briquet and coke lump quality parameters are provided. The study shows that high quality metallurgical coke lumps are obtained by briquetting mixtures of black coal and iron ore in a mixture of about 70:30 with 4 to 9% addition of sulfite binder. Compression strength of coke lumps exceeded 35 MPa. The minimum black coal-iron ore mass relation for producing metallurgical coke lumps was 30:70 using 2 types of iron ore concentrates. The influence of adding limestone to the briquetting mixture and of coking conditions resembling the horizontal chamber oven process is also investigated. 5 references.

Evaluation of models of particulate suspension for a thorium ore stockpile

International Nuclear Information System (INIS)

Smith, W.J.

1983-01-01

Fifteen mathematical models of particle saltation, suspension, and resuspension were reviewed and categorized. Appropriate models were applied to the estimation of particulate releases from a hypothetical thorium ore storage pile. An assumed location (near Lemhi Pass, Montana) was used to permit the development of site specific information on ore characteristics and environmental influences. The available models were characterized in terms of suitability for representing aspects of the ore pile, such as rough surface features, wide particle size range, and site specific climate. Five models were selected for detailed study. A computer code for each of these is given. Site specific data for the assumed ore stockpile location were prepared. These data were manipulated to provide the input values required for each of the five models. Representative values and ranges for model variables are tabulated. The response of each model to input data for selected variables was determined. Each model was evaluated in terms of the physical realism of its response of each model to input data for selected variables was determined. Each model was evaluated in terms of the physical realism of its responses and its overall ability to represent the features of an ore stockpile. The two models providing the best representation were a modified version of the dust suspension subroutine TAILPS from the computer code MILDOS, and the dust suspension formulation from the computer code REDIST. Their responses are physically reasonable, although different from each other for two parameters: ore moisture and surface roughness. With the input values judged most representative of an ore pile near Lemhi Pass, the estimate of the release of suspended particulates is on the order of 1 g/m 2 -yr

Uranium mobilization from low-grade ore by cyanobacteria

International Nuclear Information System (INIS)

Lorenz, M.G.; Krumbein, W.E.

1985-01-01

Three cyanobacterial isolates (two LPP-B forms and one Anabaena or Nostoc species) from different environments could mobilize uranium from low-grade ores. After 80 days, up to 18% uranium had been extracted from coal and 51% from a carbonate rock by the filamentous cyanobacterium OL3, a LPP-B form. Low growth requirements with regard to light and temperature optima make this strain a possible candidate for leaching neutral and alkaline low-grade uranium ores. (orig.)

Uranium mobilization from low-grade ore by cyanobacteria

Energy Technology Data Exchange (ETDEWEB)

Lorenz, M.G.; Krumbein, W.E.

1985-04-01

Three cyanobacterial isolates (two LPP-B forms and one Anabaena or Nostoc species) from different environments could mobilize uranium from low-grade ores. After 80 days, up to 18% uranium had been extracted from coal and 51% from a carbonate rock by the filamentous cyanobacterium OL3, a LPP-B form. Low growth requirements with regard to light and temperature optima make this strain a possible candidate for leaching neutral and alkaline low-grade uranium ores.

Aluminum chloride restoration of in situ leached uranium ores

International Nuclear Information System (INIS)

Grant, D.C.; Burgman, M.A.

1982-01-01

During in situ uranium mining using ammonium bicarbonate lixiviant, the ammonium exchanges with cations on the ore's clay. After mining is complete, the ammonium may desorb into post-leach ground water. For the particular ore studied, other chemicals (i.e., uranium and selenium) which are mobilized during the leach process, have also been found in the post-leach ground water. Laboratory column tests, used to simulate the leaching process, have shown that aluminum chloride can rapidly remove ammonium from the ore and thus greatly reduce the subsequent ammonium leakage level into ground water. The aluminum chloride has also been found to reduce the leakage levels of uranium and selenium. In addition, the aluminum chloride treatment produces a rapid improvement in permeability

Work within the coordinated programme on bacterial leaching of uranium ores

International Nuclear Information System (INIS)

Jayaram, K.M.V.

1978-10-01

The paper relates geological and lithological aspects of host rocks to the leaching and precipitation of uranium through the agency of microorganisms. For this purpose three different host rocks were studied: a low grade uranium ore analysing 0.045% U 3 O 8 and two high grade ores analysing 0.27% and 1.8% U 3 O 8 respectively. The affect of ore composition, water composition and climatic conditions were studied in relation to the nature of the microflora indigenously developed

Radioanalysis of RE enrichment of ion adsorption type RE ores

CERN Document Server

Zhao Shu Quan; Hu He Ping; Li Fu Sheng; Chen Ying Min; LiuShiMing

2002-01-01

Objective: To analyze the radioactivity in Rare Earth (RE) enrichment of ion adsorption type RE ores. Methods: Using HPGe-gamma spectrometer to analyze the activity ratio of gamma radionuclides in kind of samples, using FJ-2603 low background alpha, beta measurement apparatus to measure their total alpha and total beta activities, and using X-ray fluorescence spectrometer to analyze contents of La sub 2 O sub 3 and Y sub 2 O sub 3 , respectively. Results: HPGe gamma spectroscopy and X-ray fluorescence spectroscopy are simple, convenient and non-destructive methods of analyzing radionuclides and La sub 2 O sub 3 , Y sub 2 O sub 3 in RE enrichment of ion adsorption type RE ores, respectively. Conclusion: The basic data were provided for radiation protection and treatment of gas, liquid and solid waste in RE production of ion adsorption type RE ores; method and experience were provided for studying ion adsorption type RE ores

X-ray radiometric method of ore quality monitoring during mining

International Nuclear Information System (INIS)

Ivanyukovich, G.A.

1979-01-01

The method is basically applied for sampling ore deposits, mainly of nonferrous and rare metals. It can be used for determining one, two or three elements in the deposit. In the USSR, the method has so far been used in Far East tin deposits and in the North Caucasus tungsten-molybdenum deposit. It is used for the analysis of boreholes, shaft walls, mined ore and ore material intended for enriching. The instruments used include single-channel gamma spectrometers using scintillation or proportional counters as detectors. Logging instruments include dual-channel spectrometers featuring automatic gain control and data processing devices. The instruments are designed for separating elements with atomic numbers 19 to 88 from mine wall materials and with atomic numbers 26 to 88 in boreholes at concentrations exceeding 0.1% and 0.01% for tin and silver, respectively. The economic benefit is shown of the introduction of the method using the Sadon lead-zinc plant and Khrustalnensk ore treatment plant as examples. (H.S.)

Improvements on heap leaching process for a refractory uranium ore and yellow cake precipitation process

International Nuclear Information System (INIS)

Feng Jianke

2013-01-01

Some problems such as formed harden matrix, ore heap compaction, poor permeability, and agglomeration of absorption resin occur during extracting uranium from a refractory uranium ore by heap leaching process. After some measures were taken, i.e. spraying a new ore heap by low concentration acid, two or more ore heaps in series leaching, turning ores in ore heap, the permeability was improved, acid consumption was reduced. Through precipitate circulation and aging, the yellow cake slurry in amorphous or microlite form was transformed to crystal precipitate, thus uranium content in yellow cake was improved, and water content in yellow cake was lowered with good economic benefits. (author)

Radioactivity of Ore Sites of Lead, Zinc and Phosphate in Serbia

International Nuclear Information System (INIS)

Todorovic, D.; Jankovic, M.; Nikolic, J.; Kosutic, D.

2011-01-01

Natural resources such as ores contain radioactive nuclides at various concentrations. Therefore it is important to investigate the radioactivity in these resources as well as in the soil at the locations of ore deposits. For that reason we conducted preliminary measurements in the soil samples taken from the locations of lead and zinc ore deposits (Bosilegrad and Raska) and from the locations of phosphate ore deposits of phosphate (Bosilegrad). The activity concentrations of radionuclides in soil samples were determined by gamma spectrometry (HPGe detector, relative efficiency 23 %). Results showed the presence of natural radionuclides 226Ra, 232Th, 40K, 235U, 238U as well as the produced radionuclide 137Cs (from the Chernobyl accident). Ambient gamma radiation dose rate in ground level air was also measured. (author)

Hydrochemical uranium mining at the Straz ore deposit and its hydrogeological consequences

International Nuclear Information System (INIS)

Hanzlik, J.; Moravec, J.; Macak, P.

1992-01-01

The uranium ore deposit at Straz is situated in the North Bohemian Cretaceous Massif. Uranium is extracted from the deposit by underground chemical leaching by means of drills from the ground. Relevant to this kind of extraction, from the hydrogeological and environmental aspects, are the hydrogeological location of the deposit, the kind and amounts of the leaching solution and ways of its injection. The following amounts, in thousand tons, have been injected underground throughout the entire period of practicing chemical extraction of uranium (till 1990): sulfuric acid 3700, nitric acid 270, ammonia 100, hydrofluoric acid 25. The overall area of the leaching fields is 630 hectares, which accommodate 9300 technological boreholes. The environmental burden of the Cenomanian rocks and Turonian water reservoir was analyzed, and significantly elevated heavy metal contents from the recirculation of the technological solutions were found. The solutions expand beyond the leaching fields, causing a contamination of underground water within wider surroundings. The volume of contaminated water in the Turonian reservoir is currently estimated at 2 - 20 million m 3 . Uranium extraction by leaching is harmful at this deposit, having far-reaching impacts on the hydrosphere and ecosystem (increased dust, deforestation of slopes of the Ralsko hill, contamination of water and soil, etc.). Abandoning the ore extraction appears to be the sole feasible approach to this problem. (Z.S.). 2 tabs., 3 figs

Chapter 3. Classical method of uranium leaching from ores and reasons for incomplete recovery at dumps of State Enterprise 'VOSTOKREDMET'. 3.3. Basic regularities of uranium ores leaching

International Nuclear Information System (INIS)

Khakimov, N.; Nazarov, Kh.M.; Mirsaidov, I.U.

2012-01-01

Present article is devoted to basic regularities of uranium ores leaching. It was found that the basic method of uranium ores enrichment and producing of reasonably rich and pure uranium concentrates (usually technical uranium oxide) is a chemical concentration concluded in selective uranium leaching from ore raw materials with further, uranium compounds - so called uranium chemical concentrates. Such reprocessing of uranium ores with the purpose of uranium chemical concentrates production, currently, are produced everywhere by hydrometallurgical methods. This method in comparison with enrichment and thermal reprocessing is a universal one. Hydrometallurgy - the part of chemical technology covering so called moist methods of metals and their compounds (in the current case, uranium) extraction from raw materials, where they are contained. It can be ores or ore concentrates produced by radiometric, gravitational, floatation enrichment, sometimes passed through high-temperature reprocessing or even industry wastes. The basic operation in hydrometallurgy is its important industrial element - metal or metals leaching as one or another compound. Leaching is conversion of one or several components to solution under impact of relevant technical solvents: water, water solutions, acids, alkali or base, solution of some salts and etc. The basic purpose of leaching in uranium technology is to obtain the most full and selective solution of uranium.

Status Report from the United Kingdom [Processing of Low-Grade Uranium Ores

Energy Technology Data Exchange (ETDEWEB)

North, A A [Warren Spring Laboratory, Stevenage, Herts. (United Kingdom)

1967-06-15

The invitation to present this status report could have been taken literally as a request for information on experience gained in the actual processing of low-grade uranium ores in the United Kingdom, in which case there would have been very little to report; however, the invitation naturally was considered to be a request for a report on the experience gained by the United Kingdom of the processing of uranium ores. Lowgrade uranium ores are not treated in the United Kingdom simply because the country does not possess any known significant deposits of uranium ore. It is of interest to record the fact that during the nineteenth century mesothermal vein deposits associated with Hercynian granite were worked at South Terras, Cornwall, and ore that contained approximately 100 tons of uranium oxide was exported to Germany. Now only some 20 tons of contained uranium oxide remain at South Terras; also in Cornwall there is a small number of other vein deposits that each hold about five tons of uranium. Small lodes of uranium ore have been located in the southern uplands of Scotland; in North Wales lower palaeozoic black shales have only as much as 50 to 80 parts per million of uranium oxide, and a slightly lower grade carbonaceous shale is found near the base of the millstone grit that occurs in the north of England. Thus the experience gained by the United Kingdom has been of the treatment of uranium ores that occur abroad.

94423-6883 Evaluation of Iron Ore Deposits in Elayiram Pannai

African Journals Online (AJOL)

Michael Horsfall

ABSTRACT: 2D Electrical Resistivity Imaging (ERI) investigation is suitable method to determine the geotechnical problems and it is used to identify the iron ore deposits. 2D. Electrical Resistivity Imaging with Wenner array was conducted within the iron ore deposits area in Elayiram Pannai, Virudhunagar District, ...

Studies of leaching of copper ores and flotation wastes

International Nuclear Information System (INIS)

Wawszczak, D.; Deptula, A.; Lada, W.; Smolinski, T.; Olczak, T.; Brykala, M.; Wojtowicz, P.; Rogowski, M.; Milkowska, M.; Chmielewski, A.G.

2014-01-01

In Poland, there are significant deposits of copper ores. During the copper extraction, large amounts of flotation wastes are produced. In the ores and flotation wastes many other important elements are present. The main goal of this work was analysis of uranium content and to elaborate procedures for recovery of U from these materials. Two types of ores and four types of waste were examined. It has been found that uranium content varies from 4.5 to 25 ppm. The other elements have also been determined in these materials: Cu (4-5 % in ores and 0.3-1.7 % in waste), Ag, Re, Mo, La, Ni, V, etc. For leaching, sulfuric acid and sodium carbonates of various concentrations (temperature, time) were used. The optimum conditions for leaching have been found. The concentration of uranium in the final solution was generally less than 25 μg/mL. The other elements are also present in the leaching solutions. Simultaneous liquid-liquid extraction of uranium with these elements from leaching solution is under study. In our opinion, only such combined procedure for the recovery of uranium together with the accompanying elements could be cost-effective. (author)

Radiometric sampling of bucked copper-nickel ores for determining chemical composition

International Nuclear Information System (INIS)

Komlev, V.N.; Eliseev, G.I.

1978-01-01

Presented are the results and the technique of experimental-methodical works on radiometric sampling of bucked copper-nickel ores for determining chemical composition with their selection and analysis by the neutron-gamma method and by the gamma-gamma method. The error is estimated according to the chosen conditions of sampling. It is found that the gamma-gamma method being more rapid but less accurate is applied for rapid control of ore current, whereas the neutron-gamma method is applied for quality control of ores extracted

Rare earth mobility in hydrothermal ore-forming systems

International Nuclear Information System (INIS)

Cornell, D.H.; Schade, J.; Scheepers, R.; Watkeys, M.K.

1988-01-01

Rocks and ores which form by magmatic processes display a range of chondrite-normalised rare earth profiles. One REE (rare earth elements) profile feature which seems unrelated to magmatic processes is the birdwing profile, in which both heavy and light rare earths are enriched relative to the middle rare earths. Birdwing rare earth profiles are an easily identified geochemical anomaly. It is proposed that rare earth geochemistry could be applied in geochemical prospecting for ore formed by hydrothermal processes. 5 figs

Biosolubilization of uranyl ions in uranium ores by hydrophyte plants

International Nuclear Information System (INIS)

Cecal, Alexandru; Calmoi, Rodica; Melniciuc-Puica, Nicoleta

2006-01-01

This paper investigated the bioleaching of uranyl ions from uranium ores, in aqueous medium by hydrophyte plants: Lemna minor, Azolla caroliniana and Elodea canadensis under different experimental conditions. The oxidation of U(IV) to U(VI) species was done by the atomic oxygen generated in the photosynthesis process by the aquatic plants in the solution above uranium ores. Under identical experimental conditions, the capacity of bioleaching of uranium ores decreases according to the following series: Lemna minor > Elodea canadensis > Azolla caroliniana. The results of IR spectra suggest the possible use of Lemna minor and Elodea canadensis as a biological decontaminant of uranium containing wastewaters. (author)

The performance of leaching and bio-leaching from sulphide ores usiing SEVOP

OpenAIRE

Krstev, Boris; Krstev, Aleksandar; Golomeov, Blagoj; Golomeova, Mirjana; Sala, Ferat; Gocev, Zivko; Zivanovic, Jordan; Krstev, Dejan

2013-01-01

The refractory or low grade copper chalcopyrite ores or galena/sphalerite domestic ores in Republic of Macedonia are investigated by conventional copper flotation and selective flotation for galena/sphalerite. In the meantime, investigations are directed to the new possibilities of leaching by microorganisms – bioleaching. The paper is result of these technologies and investigations carried out for recovery of in the mentioned ores. Using Simplex EVOP and computer programme. Multisimple...

Uranium extraction from ores with lemon juice I,b-uranium recovery from pregnant lemon juice liquors obtained by attacking phosphate ores and suggested flowsheet

International Nuclear Information System (INIS)

EL-Sayed, M.H.

1992-01-01

In order to recover uranium from the pregnant liquors obtained by attacking safaga phosphate and qatrani phosphatic sandstone ore materials with lemon juice, methylation for acidic fraction-salt separation has been carried out. Afterwards, separation of uranium from the associated calcium (mainly present in lemon juice liquors as citrate) has been performed by making-use of the wide difference in their water solubility. The solutions containing the separated uranium were then subjected to evaporation till dryness whereby the precipitated uranyl citrate was calcined at 500 degree C to obtain the yellow orange oxide powder (U o 3 ). On the basis of one ton ore treatment, a flowsheet for uranium recovery from the two ore materials has been suggested

Uranium extraction from ores with lemon juice; II,b. uranium recovery from pregnant lemon juice liquors obtained by attacking phosphate ore and suggested flowsheet

International Nuclear Information System (INIS)

Hussein, E.M.

1997-01-01

In order to recover uranium from the pregnant liquors obtained by attacking Safaga phosphate and Qatrani phosphatic sandstone ore materials with lemon juice, methylation for acidic fraction-salt separation has been carried out. Afterwards, separation of uranium from the associated calcium (mainly present in lemon juice liquors as citrate) has been performed by making-use of the wide difference in their water solubility. The solutions containing the separated uranium were then subjected to evaporation till dryness whereby the precipitated uranyl citrate was calcined at 500 degree C to obtain the yellow orange oxide powder (UO 3 ). On the basis of one ton ore treatment, a flowsheet for uranium recovery from the two ore materials has been suggested

Production of Solar Cells in Space from Non Specific Ores by Utilization of Electronically Enhanced Sputtering

Science.gov (United States)

Curreri, Peter A.

2009-01-01

An ideal method of construction in space would utilize some form of the Universal Differentiator and Universal Constructor as described by Von Neumann (1). The Universal Differentiator is an idealized non ore specific extractive device which is capable of breaking any ore into its constituent elements, and the Universal Constructor can utilize these elements to build any device with controllability to the nanometer scale. During the Human Exploration Initiative program in the early 1990s a conceptual study was done (2) to understand whether such devices were feasible with near term technology for the utilization of space resources and energy. A candidate system was proposed which would utilize electronically enhanced sputtering as the differentiator. Highly ionized ions would be accelerated to a kinetic energy at which the interaction between them and the lattice elections in the ore would be at a maximum. Experiments have shown that the maximum disintegration of raw material occurs at an ion kinetic energy of about 5 MeV, regardless of the composition and structure of the raw material. Devices that could produce charged ion beams in this energy range in space were being tested in the early 1990s. At this energy, for example an ion in a beam of fluorine ions yields about 8 uranium ions from uranium fluoride, 1,400 hydrogen and oxygen atoms from ice, or 7,000 atoms from sulfur dioxide ice. The ions from the disintegrated ore would then be driven by an electrical field into a discriminator in the form of a mass spectrometer, where the magnetic field would divert the ions into collectors for future use or used directly in molecular beam construction techniques. The process would require 10-7 Torr vacuum which would be available in space or on the moon. If the process were used to make thin film silicon solar cells (ignoring any energy inefficiency for beam production), then energy break even for solar cells in space would occur after 14 days.

Spatial evolution of Zn-Fe-Pb isotopes of sphalerite within a single ore body: A case study from the Dongshengmiao ore deposit, Inner Mongolia, China

Science.gov (United States)

Gao, Zhaofu; Zhu, Xiangkun; Sun, Jian; Luo, Zhaohua; Bao, Chuang; Tang, Chao; Ma, Jianxiong

2018-01-01

Analyses of sphalerite minerals from the characteristic brecciated Zn-Pb ores of the main ore body in the giant Dongshengmiao deposit have revealed variations in δ66Zn from 0.17 to 0.40‰ and in δ56Fe from -1.78 to -0.35‰. Further, the investigated pyrrhotite samples have iron that is isotopically similar to that of associated sphalerite minerals. The most distinctive pattern revealed by the zinc and iron isotope data is the lateral trend of increasing δ66Zn and δ56Fe values from southwest to northeast within the main ore body. The lead isotopic homogeneity of ore sulfides from the main ore body suggests that there is only one significant source for metal, thus precluding the mixing of multiple metal sources as the key factor controlling spatial variations of zinc and iron isotopes. The most likely control on spatial variations is Rayleigh fractionation during hydrothermal fluid flow, with lighter Zn and Fe isotopes preferentially incorporated into the earliest sulfides to precipitate from fluids. Precipitations of sphalerite and pyrrhotite have played vital roles in the Zn and Fe isotopic variations, respectively, of the ore-forming system. Accordingly, the larger isotopic variability for Fe than Zn within the same hydrothermal system perhaps resulted from a larger proportion of precipitation for pyrrhotite than for sphalerite. The lateral trend pattern revealed by the zinc and iron isotope data is consistent with the occurrence of a cystic-shaped breccia zone, which is characterized by marked elevation in Cu. The results further confirm that Zn and Fe isotopes can be used as a vectoring tool for mineral prospecting.

The experimental study of bacterial leaching at condition of different ore's diameter

International Nuclear Information System (INIS)

Liu Jinhui; Li Lin; Liu Yajie

2006-01-01

This papper compared the effect of leaching rate of uranium and the adaptability of bacteria with the condition of different ore's diameter (2-5 mm, 5-10 mm), which use the way of inleakage-leaching. The experiment use the way that firstly acid leaching, and then 2 bacterial leaching. As a reasult that the total leaching-rate of minute diameter ore are always high than the big diameter one. But for the quantum of consumed acid its just a opposition. During bacterial leaching the adaptability of bacteria in big diameter ore are high than in the minute one. So this experiment may offer a bases for a latter industry experiment which use big diameter ore's bacterial leaching. (authors)

Complex sulphide-barite ore leaching in ferric chloride solution

Directory of Open Access Journals (Sweden)

Miroslav Sokić

2016-06-01

Full Text Available The results of research on the leaching process of complex sulphide-barite ore were presented in this paper. The leaching process was carried out in a laboratory autoclave by ferric chloride solution. Considering that those minerals are represented in complex structural-textural relationships, it is not possible to extract lead, zinc and copper minerals from ore by flotation methods. The obtained results confirmed possibility of the ore processing directly, by chemical methods. The effect of temperature, time and oxygen partial pressure on the lead, zinc and copper dissolution was studied. The maximal leaching degree was achieved at 100 °C and amount of 91.5 % for Pb, 96.1 % for Zn and 60.7 % for Cu. Leaching at temperatures above 100 °C is impractical.

BL-2a and BL-4a: certified uranium reference ores

International Nuclear Information System (INIS)

Steger, H.F.; Bowman, W.S.; Zechanowitsch, G.; Sutarno, R.

1982-05-01

Samples of two uranium ores BL-2a and BL-4a from Beaverlodge, Saskatchewan, were prepared as compositional reference materials to replace the similar certified ores, BL-2 and BL-4, of which the stock had been exhausted. Each ore was ground to minus 74 μm, blended in one lot and bottled in 200-g units. The homogeneity of the ores with respect to uranium was confirmed by both a neutron activation and a fluorimetric analytical procedure performed by two commercial laboratories. The recommended value for uranium is based on the results of one determination on each of 25 bottles by the volumetric-umpire method performed at CANMET. A statistical analysis of the data gave a recommended value for uranium of 0.426% for BL-2a and 0.1248% for BL-4a

Geology and ore deposits of the Section 23 Mine, Ambrosia Lake District, New Mexico

Science.gov (United States)

Granger, H.C.; Santos, E.S.

1982-01-01

The section 23 mine is one of about 18 large uranium mines opened in sandstones of the fluvial Westwater Canyon Member of the Jurassic Morrison Formation in the Ambrosia Lake mining district during the early 1960s. The Ambrosia Lake district is one of several mining districts within the Grants mineral belt, an elongate zone containing many uranium deposits along the southern flank of the San Juan basin. Two distinct types of ore occur in the mine. Primary ore occurs as peneconcordant layers of uranium-rich authigenic organic matter that impregnates parts of the reduced sandstone host rocks and which are typically elongate in an east-southeast direction subparallel both to the sedimentary trends and to the present-day regional strike of the strata. These are called prefault or trend ores because of their early genesis and their elongation and alinement. A second type of ore in the mine is referred to as postfault, stacked, or redistributed ore. Its genesis was similar to that of the roll-type deposits in Tertiary rocks of Wyoming and Texas. Oxidation, related to the development of a large tongue of oxidized rock extending from Gallup to Ambrosia Lake, destroyed much of the primary ore and redistributed it as massive accumulations of lower grade ores bordering the redox interface at the edge of the tongue. Host rocks in the southern half of sec. 23 (T. 14 N., R. 10 W.) are oxidized and contain only remnants of the original, tabular, organic-rich ore. Thick bodies of roll-type ore are distributed along the leading edge of the oxidized zone, and pristine primary ore is found only near the north edge of the section. Organic matter in the primary ore was derived from humic acids that precipitated in the pores of the sandstones and fixed uranium as both coffinite and urano-organic compounds. Vanadium, molybdenum, and selenium are also associated with the ore. The secondary or roll-type ores are essentially free of organic carbon and contain uranium both as coffinite and

Silicophosphate Sorbents, Based on Ore-Processing Plants' Waste in Kazakhstan

Science.gov (United States)

Kubekova, Sholpan N.; Kapralova, Viktoria I.; Telkov, Shamil A.

2016-01-01

The problem of ore-processing plants' waste and man-made mineral formations (MMF) disposal is very important for the Republic of Kazakhstan. The research of various ore types (gold, polymetallic, iron-bearing) MMF from a number of Kazakhstan's deposits using a complex physical and chemical methods showed, that the waste's main components are…

Ladinian skonca beds of the Idrija Ore Deposit (W Slovenia

Directory of Open Access Journals (Sweden)

Jože Čar

2013-12-01

Full Text Available The richly mineralised Skonca beds (der Lagerschiefer were the most important mining level of the Idrija ore deposit. In addition to epigenetic ores, exceptional quantities of various rich syngenetic cinnabar ores could be found in these layers. »Jeklenka« (steel ore, »opekovka« (brick ore, »jetrenka« (liver ore, coral ore, and some other bedded cinnabar ores contained up to as much as 78 % Hg. These ores were excavated more or less intensively from their discovery in 1508 until the cessation of works in the Idrija Mine in 1977. The Skonca beds can be found in all parts of the Idrija ore deposit in the form of large or small, irregular, lenseshaped bodies or layers. In the section of the ore deposit known as šTalnina’, the Skonca beds are on average only 4 m thick, and from 10 to maximally 25 m in other parts of the ore deposit. The greatest thickness of these beds, i.e. around 40 m, can be found in the area of the Karóli tectonic unit, situated in the deepest part of the former Idrija Middle Triassic tectonic fault trough. The rocks in the Skonca beds are grouped in typical sequences, which represent a key for the reconstruction of sedimentary environments. The sequences are designated with the letters A, B, C and D. Sequence C is further divided into subsequences C1 with a carbonate and C2 with a siliceous structure. The lithological units of sequence A usually represent the lowest part of the Skonca beds, and may be the lateral equivalents of rocks of series B and subsequence C1. Sequence A is comprised of dispersed, gravelly varieties of carbonatic lythic sandstone, limestone and dolomite siltstone, as well as intercalations of gravelly silty micritic limestone and micritic limestone. Sequence B consists of typical transitional rocks between sequences A and C1, among which silty limestone with transitions to calcitic marlstone and claystone can be found. Sequence C is formed of šclassic’ Skonca rock beds. Although the bottom

Understanding Cu release into environment from Kure massive sulfide ore deposits, Kastamonu, NW Turkey

Science.gov (United States)

Demirel, Cansu; Sonmez, Seref; Balci, Nurgul

2014-05-01

Covering a wide range on the earth's crust, oxidation of metal sulfide minerals have vital environmental impacts on the aquatic environment, causing one of the major environmental problems known as acid mine drainage (AMD). Located in the Kastamonu province of the Western Black Sea region, Kure district is one of the major copper mining sites in Turkey. Mining activities in the area heads back to ancient times, such that operation is thought to be started with the Roman Empire. Currently, only the underground mining tunnels of Bakibaba and Asikoy are being operated. Thus, mining heaps and ores of those pyritic deposits have been exposed to the oxidative conditions for so long. As a result of weathering processes of past and recent heaps of the Kure volcanic massive sulfide deposits in addition to the main ore mineral (chalcopyrite), significant amount of metals, especially Cu, are being released into the environment creating undesirable environmental conditions. In order to elucidate Cu release mechanisms from Kure pyritic ore deposits and mining wastes, field and laboratory approaches were used. Surface water and sediment samples from the streams around the mining and waste sites were collected. Groundwater samples from the active underground mining site were also collected. Physical parameters (pH, Eh, T°C, and EC) of water samples were determined in situ and in the laboratory using probes (WTW pH 3110, WTW Multi 9310 and CRISON CM 35). Metal and ion concentrations of the water samples were analysed using ICP-MS and DR 2800 spectrophotometer, respectively. High Cu, Co, Zn and Fe concentrations were determined in the water samples with pH values ranging from 2.9- 4. Cu concentrions ranges from 345 ppm to 36 ppm in the water samples. Consistent with the water samples, high Cu, Fe, Zn and Co were also determined in the sediment samples. Laboratory chalcopyrite oxidation experiments under the conditions representing the field site were set up as biological and

Pelletized vs. natural iron ore technology: energy, labor, and capital changes. Final report

Energy Technology Data Exchange (ETDEWEB)

Kakela, P.

1978-09-01

Total energy requirements per ton of iron-in-ore for natural and pelletized ore were calculated by a hybrid energy analysis. Energy requirements for ore preparation were subsequently considered as one energy input (embodied) to blast furnaces. Total energy requirements per ton molten iron were calculated for each year from 1955 through 1975 to identify changes attributable to the shift in iron ore preparation. Four results were found. (1) In practice, the lean ores are energetically superior. Pelletized ore requires more energy at the mine than natural ore, but pellets produce offsetting energy savings in the blast furnace. (2) Labor changes followed a similar pattern: man-hours per ton of molten iron increased at the mine with pelletization, but decreased at the blast furnance. Net labor required per ton of molten iron has decreased with pelletization. (3) Capital investments per ton of molten iron have increased greatly at iron ore mines with pelletization and decreased moderately at blast furnaces. New capital investment per ton of molten iron has increased with pelletization. (4) In the iron and steel industry, relatively low-priced energy held a substantial advantage over high-priced labor between 1950 and 1969. The industry, however, discovered that capital investments in pellet plants could save both labor and energy up to 1963; after 1963 capital and energy weresubstituted for labor. A sharp reversal of substitutional advantage occurred in 1970; energy jumped to the most costly factor. Thus capital presently shows a strong substitutional advantage over high-priced energy and intermediately-priced labor.

Influence of the Moisture Content on the Flowability of Fine-Grained Iron Ore Concentrate

OpenAIRE

C. Lanzerstorfer; M. Hinterberger

2017-01-01

The iron content of the ore used is crucial for the productivity and coke consumption rate in blast furnace pig iron production. Therefore, most iron ore deposits are processed in beneficiation plants to increase the iron content and remove impurities. In several comminution stages, the particle size of the ore is reduced to ensure that the iron oxides are physically liberated from the gangue. Subsequently, physical separation processes are applied to concentrate the iron ore. The fine-graine...

Hydrometallurgical Processing Technology of Titanomagnetite Ores

Directory of Open Access Journals (Sweden)

Victor Ivanovich Sachkov

2017-12-01

Full Text Available In this paper, we study the possibility of obtaining iron and titanium-vanadium concentrates with highest contents of iron and titanium, respectively, through hydrometallurgical processing of the titanomagnetite ores of the Chineisk deposit. We varied two key parameters to determine the efficiency of the process: (a concentration of leaching solution (ammonium fluoride; and (b acidity of solution. Ammonium fluoride concentration was varied from 0.08 mol/L to 4.2 mol/L with the other fixed parameters. It was shown that optimum ammonium fluoride concentration for leaching the ore is 0.42 mol/L; at these concentrations iron and titanium contents are about 62.8 wt % and 3.5 wt % in solid phase, respectively. The acidity of solution was changed by adding of hydrofluoric acid with varied concentration (from 0.86 mol/L to 4.07 mol/L to ammonium fluoride solution with fixed concentration of 0.42 mol/L. The best results (degree of titanium extraction = 63.7% were obtained when using a solution of hydrofluoric acid with concentration 4.07 mol/L. In this case, the addition of acid makes it possible to increase the Fe/Ti ratio by 3.4 times in comparison with the original ore. Thus, we conclude that acidity and the concentration of ammonium fluoride solution significantly influences the selectivity of the hydrometallurgical process.

Chemical separation of Th-230 from uranium ore

International Nuclear Information System (INIS)

Kikunaga, H.; Nakanishi, T.; Mitsugashira, T.; Hara, M.

2001-01-01

We are studying the decay processes of low energy nuclear isomer of Th-229. Our approach to produce Th-229m is (γ, n) reaction on Th-230, hence, about 100 μg of Th-230 is necessary as a target. However, our stock of Th-230 has run out during several experiments, thus, we tried to separate Th-230 from uranium ore. In this paper, the detail of a chemical separation procedure for Th-230 from uranium ore and the results are reported. (author)

A novel stress distribution analytical model of O-ring seals under different properties of materials

International Nuclear Information System (INIS)

Wu, Di; Wang, Shao Ping; Wang, Xing Jian

2017-01-01

The elastomeric O-ring seals have been widely used as sealing elements in hydraulic systems. The sealing performance of O-ring seals is related to stress distribution. The stresses distribution depends on the squeeze rate and internal pressure, and would vary with properties of O-ring seals materials. Thus, in order to study the sealing performance of O-ring seals, it is necessary to describe the analytic relationship between stress distribution and properties of O-ring seals materials. For this purpose, a novel Stress distribution analytical model (SDAM) is proposed in this paper. The analytical model utilizes two stress complex functions to describe the stress distribution of O-ring seals. The proposed SDAM can express not only the analytical relationship between stress distribution and Young’s modulus, but also the one between stress distribution and Poisson’s ratio. Finally, compared results between finite element analysis and the SDAM validate that the proposed model can effectively reveal the stress distribution under different properties for O-ring materials

A novel stress distribution analytical model of O-ring seals under different properties of materials

Energy Technology Data Exchange (ETDEWEB)

Wu, Di; Wang, Shao Ping; Wang, Xing Jian [School of Automation Science and Electrical Engineering, Beihang University, Beijing (China)

2017-01-15

The elastomeric O-ring seals have been widely used as sealing elements in hydraulic systems. The sealing performance of O-ring seals is related to stress distribution. The stresses distribution depends on the squeeze rate and internal pressure, and would vary with properties of O-ring seals materials. Thus, in order to study the sealing performance of O-ring seals, it is necessary to describe the analytic relationship between stress distribution and properties of O-ring seals materials. For this purpose, a novel Stress distribution analytical model (SDAM) is proposed in this paper. The analytical model utilizes two stress complex functions to describe the stress distribution of O-ring seals. The proposed SDAM can express not only the analytical relationship between stress distribution and Young’s modulus, but also the one between stress distribution and Poisson’s ratio. Finally, compared results between finite element analysis and the SDAM validate that the proposed model can effectively reveal the stress distribution under different properties for O-ring materials.

Waste monitoring of the uranium ore processing activities in Romania

International Nuclear Information System (INIS)

Nica, L.

2002-01-01

The uranium ore processing activities at the Feldioara site produce a range of liquid and solid waste that are monitored. Liquids are treated through decantation, pH correction and uranium precipitation before their release into the environment. The solid waste is gathered into ore specific area and are covered regularly with clay materials. (author)

Lacustrine-humate model for primary uranium ore deposits, Grants Uranium Region, New Mexico

International Nuclear Information System (INIS)

Turner-Peterson, C.E.

1985-01-01

Two generations of uranium ore, primary and redistributed, occur in fluvial sandstones of the Upper Jurassic Morrison Formation in the San Juan basin; the two stages of ore formation can be related to the hydrologic history of the basin. Primary ore formed soon after Morrison deposition, in the Late Jurassic to Early Cretaceous, and a model, the lacustrine-humate model, is offered that views primary mineralization as a diagenetic event related to early pore fluid evolution. The basic premise is that the humate, a pore-filling organic material closely associated with primary ore, originated as humic acids dissolved in pore waters of greenish-gray lacustrine mudstones deposited in the mud-flat facies of the Brushy Basin Member and similar K shale beds in the Westwater Canyon Member. During compaction associated with early burial, formation water expelled from lacustrine mudstone units carried these humic acids into adjacent sandstone beds where the organics precipitated, forming the humate deposits that concentrated uranium. During the Tertiary, much later in the hydrologic history of the basin, when Jurassic sediments were largely compacted, oxygenated ground water flowed basinward from uplifted basin margins. This invasion of Morrison sandstone beds by oxidizing ground waters redistributed uranium from primary ores along redox boundaries, forming ore deposits that resemble roll-front-type uranium ores. 11 figures

Filtration aids in uranium ore processing

International Nuclear Information System (INIS)

Ford, H.L.; Levine, N.M.; Risdon, A.L.

1975-01-01

The patent describes a process whereby improved flocculation efficiency and filtration of carbonate leached uranium ore pulps are obtained by treating the filter feed slurry with an aqueous solution of hydroxyalkyl guar. (J.R.)

Technological pretreatment of the synchysite non-oxidized ore

Science.gov (United States)

Munkhtsetseg, B.; Burmaa, G.

2013-06-01

Mongolia has rich deposits of rare, precious, and poly-metallic ores. Nowadays, it is important to research separation of rare earth elements oxides concentrates from the ores, analyze their unique physical chemical characteristics, and purified it. Our investigation on raw materials focuses on rare earth non-oxidized ores. Main mineral in this rock sample is Synchysite (LnCa(CO3)2F. We did technological and thermal pretreatment: direct sulphurization (H2SO4), sulphurization with subsequent roasting (800°C+H2SO4), sulphurization prior to roasting (H2SO4+650°C). Sulphurization method based on dissolution of rare earth mineral into sulfuric acid (93%) according to the reaction. The amount of rare earth element oxides is almost 10 times greater (29.16%) after direct sulphurization process, almost 8 times greater (21.14%) after sulphurization with subsequent roasting, and almost 20 times greater (44.62%) after sulphurization prior to roasting process. After those technological pretreatment raw material's micro elements Thorium and Uranium contents are reduced as follows: H2SO4>800°C+H2SO4>H2SO4+650°C. These results show that cerium group rare earth elements have very good solubility in water at +2°C temperature and decreasing micro elements content uranium and thorium good pretreatment condition is prior to roasting (H2SO4+650°C) of synchysite non-oxidized ore.

Applicability of attrition of iron ore in floating

International Nuclear Information System (INIS)

Fortes, Fabiana Fonseca

2010-01-01

The aim of this study is to investigate the possibility to increase metal recovery in the flotation of iron ore with the implementation of a stage of scrubbing followed by dispersion. The minerals in question stems from two mines located in the western portion of the Iron Quadrangle and differ mainly with respect to the percentage of hematite and porous and the presence of aggregated masses. These characteristics were compared to those of other minerals that have succeeded with the adoption of this technique. Tests were conducted at bench scale scrubbing, desliming and concentration by flotation with the blend of ore from both mines. Were varied stirring time and pH. The chemical results of desliming and flotation products in the different conditions were compared. The presence of porous hematite is relevant in a mine, mainly due to the occurrence of earthy goethite, alumina carrier of the contaminant. The step desliming is insufficient for the removal of harmful sludge flotation. Laboratory experiments showed that the scrubbing of the pulp of iron ore of Minas de Capitao do Mato and Tamandua, agitated for 10 minutes followed by desliming amid scattered, promotes increased metal recovery by about 17% and increases the selectivity of 40 % compared to the results of the scrubbing and without dispersion. The scrubbing of hematite ore followed by desliming amid scattered can bring gains in improving the quality of pellet feed fine if deployed industrially. (author)

Some aspects of the processing development for uranium ores treatment

International Nuclear Information System (INIS)

Bruno, J.B.

1982-01-01

It is discussed the methodology adopted by NUCLEBRAS to the processing development for uranium ores treatment. The used methodology has the following steps: exploratories studies, preliminaries stiudies and optimization studies. The studies include physical and chemical contained in the solution. As examples are cited the uranium ores treatment in Lagoa Real and Itataia. (A.B.) [pt

Exploitation study of the ore-body ''Tigre III''. Open-cut design and study of high-recovery underground mining method for the Tigre III ore-body

International Nuclear Information System (INIS)

Baluszka, J.C.

1980-01-01

The paper first carries out an analysis for the purpose of determining the limiting sterile/ore ratio for open-cut and underground mining in the specific filling case of Tigre III. In this connection it considers a high-recovery method of underground mining (involving the use of cemented hydropneumatic chambers), a general mine plan covering access, transport, ventilation and removal of ore as well as auxiliary services relating to the Tigre III ore body as a whole. The costs of this method of mining are determined for purposes of comparison with the open-cut method. Similarly, the limiting sterile/ore ratio is taken as the basis for an analysis of different types of pit and a design suited to the limiting ratio is adopted. As a final solution the paper favours a method which combines open-cut and underground mining. It proposes the use of the open-cut method up to the limiting ratio (in accordance with the pit design chosen) and of underground method (by the filling chamber method) for the rest of the area. (author)

Optimum condition determination of Rirang uranium ores grinding using ball mill

International Nuclear Information System (INIS)

Affandi, Kosim; Waluyo, Sugeng; Sarono, Budi; Sujono; Muhammad

2002-01-01

The grinding experiment on Rirang Uranium ore has been carried out with the aim is to find out the optimum condition of wet grinding using ball mill to produce particle size -325, -200 and -100 mesh. This will be used for decomposition feed the test was done by examine the parameters comparison of ore's weight against ball's weight and time of grinding. The test shown that the product of particle size -325 meshes was achieved optimum condition at the comparison ore's weight: ball = 1:3, grinding time 150 minutes, % solid 60, speed rotation of ball mill 60 rpm and recovery of grinding was 93.51 % of -325 mesh. The product of particle size -200 mesh was achieved optimum condition at comparison ore's weight: ball = 1:2, time of grinding 60 minutes, the fraction of + 200 mesh was regrind, the recovery of grinding 6.82% at particle size of (-200 + 250) mesh, 5.75 % at (-250 + 325)m mesh and, 47.93 % -325 mesh. The product of particle size -100 mesh was achieved the optimum condition at comparison ore's weight: ball = 1:2, time of grinding at 30 minutes particle size +100 mesh regrinding using mortar grinder, recovery of grinding 30.10% at particle size (-100 + 150) m, 12.28 % at (-150 + 200) mesh, 15.92 % at (-200 + 250) mesh, 12.44 % at (-250 + 325) mesh and 29.26 % -325 mesh. The determination of specific gravity of Rirang uranium ore was between 4.15 - 4.55 g/cm 3

Regulatory concerns for leakage testing of packagings with three O-ring closure seals

International Nuclear Information System (INIS)

Oras, J.J.; Towell, R.H.; Wangler, M.E.

1997-01-01

The American National Standard for Radioactive Materials--Leakage Tests on Packages for Shipment (ANSI N14.5) provides guidance for leakage rate testing to show that a particular packaging complies with regulatory requirements and also provides guidance in determining appropriate acceptance criteria. Recent radioactive packagings designs have incorporated three O-ring closure seals, the middle O-ring being the containment seal. These designs have the potential for false positive results of leakage rate tests. The volume between the containment O-ring and the inner O-ring is used for the helium gas required for the leakage rate tests to reduce both the amount of helium used and the time required to conduct the tests. A leak detector samples the evacuated volume between the outer O-ring and the containment O-ring. False positive results can be caused in two ways, a large leakage in the containment seal or leakage in the inner seal. This paper will describe the problem together with possible solutions/areas that need to be addressed in a Safety Analysis Report for Packagings before a particular packaging design can be certified for transport

The use of radiometric ore sorting on South African gold mines

International Nuclear Information System (INIS)

Boehme, R.C.; Freer, J.S.

1982-01-01

This paper refers to the radiometric sorting tests reported during the 7th CMMI Congress, and then describes the photometric and radiometric sorter installations in operation and under construction in South Africa at present. As radiometric sorting of gold ores uses the radiation from the uranium content as a tracer, it is essential that the sortability of the ore should be reliably determined before sorting is adopted. The method of obtaining the important ore characteristics is described, with examples. The possible increase in gold production from a hypothetical plant as a result of sorting is shown

Novel Binders and Methods for Agglomeration of Ore

Energy Technology Data Exchange (ETDEWEB)

S. K. Kawatra; T. C. Eisele; K. A. Lewandowski; J. A. Gurtler

2006-09-30

Heap leaching is one of the methods being used to recover metal from low grade ore deposits. The main problem faced during heap leaching is the migration of fine grained particles through the heap, forming impermeable beds which result in poor solution flow. The poor solution flow leads to less contact between the leach solution and the ore, resulting in low recovery rates. Agglomeration of ore into coarse, porous masses prevents fine particles from migrating and clogging the spaces and channels between the larger ore particles. Currently, there is one facility in the United States which uses agglomeration. This operation agglomerates their ore using leach solution (raffinate), but is still experiencing undesirable metal recovery from the heaps due to agglomerate breakdown. The use of a binder, in addition to the leach solution, during agglomeration would help to produce stronger agglomerates that did not break down during processing. However, there are no known binders that will work satisfactorily in the acidic environment of a heap, at a reasonable cost. As a result, operators of many facilities see a large loss of process efficiency due to their inability to take advantage of agglomeration. Increasing copper recovery in heap leaching by the use of binders and agglomeration would result in a significant decrease in the amount of energy consumed. Assuming that 70% of all the leaching heaps would convert to using agglomeration technology, as much as 1.64*10{sup 12} BTU per year would be able to be saved if a 25% increase in copper recovery was experienced, which is equivalent to saving approximately 18% of the energy currently being used in leaching heaps. For every week a leach cycle was decreased, a savings of as much as 1.23*10{sup 11} BTU per week would result. This project has identified several acid-resistant binders and agglomeration procedures. These binders and experimental procedures will be able to be used for use in improving the energy efficiency of

Bottle roll leach test for Temrezli uranium ore

International Nuclear Information System (INIS)

Çetin, K.; Bayrak, M.; Turan, A. İsbir; Üçgül, E.

2014-01-01

The bottle roll leach test is one of the dynamic leaching procedure which can meet in-situ mining needs for determining suitable working conditions and helps to simulate one of the important parameter; injection well design. In this test, the most important parameters are pulp density, acidic or basic concentration of leach solution, time and temperature. In recent years, bottle roll test is used not only for uranium but also gold, silver, copper and nickel metals where in situ leach (ISL) mining is going to be applied. For this purpose for gold and silver metal cyanide bottle roll tests and for uranium metal; acidic and basic bottle roll tests could be applied. The new leach test procedure which is held in General Directorate of Mineral Research and Exploration (MTA) of Turkey is mostly suitable for determining metal extraction conditions and recovery values in uranium containing ore bodies. The tests were conducted with samples taken from Temrezli Uranium Ore located in approximately 200 km east of Turkey’s capital, Ankara. Mining rights of Temrezli Ore is controlled 100% by Anatolia Energy Ltd. The resource estimate includes an indicated mineral resource of 10.827 Mlbs U_3O_8 [~4160 t U] at an average grade of 1426 ppm [~1210 ppm U] and an additional inferred resource of 6.587 Mlbs of U_3O_8 [~2530 t U] at an average grade of 904 ppm [~767 ppm U]. In accordance with the demand from Anatolia Energy bottle roll leach tests have been initiated in MTA laboratories to investigate the recovery values of low-grade uranium ore under in-situ leach conditions. Bottle roll leaching tests are performed on pulverized samples with representative lixiviant solution at ambient pressure and provide an initial evaluation of ore leachability with a rough estimate of recovery value. At the end of the tests by using 2 g/L NaHCO_3 and 0.2 g/L H_2O_2 more than 90% of uranium can pass into leach solution in 12 days. (author)

Characteristics of gravity and magnetic field and their relationship with uranium mineralization in northern Guangxi area

International Nuclear Information System (INIS)

Shu Xiaojing; Yin Zhongfan; Hao Yuhua; guan Nansheng; Li Xuexun

1993-08-01

The characteristics of gravity and magnetic field, deep-seated structures and their relationship with uranium mineralization in Northern Guangxi are investigated. Especially, based on geophysical investigation, the distinguishing features of uranium ore-forming are discussed, involved with the uranium source body, the heating force and mechanical force of granite magma acted on uranium mineralization, the deep-seated geological process, the hydrothermal activity, the formation environments of granite-type uranium deposit, the source of pyrite and its influence on uranium mineralization, the uranium ore-forming of Sinian-Cambrian periods and devonian period formations, and the simple model of uranium ore-forming. On the basis of the relationship of uranium mineralization with geophysical field, as well as the ore-forming geological environments inferred by gravity and magnetic field investigation, the physical-geological model is established in order to predicate uranium prospect

Vanadium-bearing titaniferous iron ores from the Rooiwater, Usushwana, Mambula, Kaffirskraal, and the Trompsburg igneous complexes

International Nuclear Information System (INIS)

Reynolds, A.M.

1979-01-01

The mineralogy and chemistry of some vanadium-bearing titaniferous iron ores from a number of smaller South African basic intrusions are reported, and an assessment is given of the potential of these ores for use as raw materials in the production of iron, high-titania slag, and vanadium pentoxide. The ores from each complex can be distinguised readily on the basis of their chemical composition and textural relations. The Rooiwater Complex represents the most promising area. It contains two layers of titaniferous magnetite, each approximately 8 m thick, in the eastern part, the lowest seam being chemically similar to the economically important main layer of titaniferous magnetite in the Bushveld Complex. The ores are silicate-poor and consist largely of multi-phase titaniferous-magnetite grains containing modified ilmenite and pleonaste micro-intergrowths. The coarse grain size of these ores favours beneficiation, and they can be partially treated to yield ilmenite concentrates and low-titania magnetite fractions in which the content of vanadium pentoxide is higher than that in the original ores. The Mambula ores are silicate-rich and would require extensive beneficiation. The Kaffirskraal ores consist of multi-phase grains of titaniferous magnetite containing crystallographically oriented ilmenite, ulvospinel, and pleonaste micro-intergrowths. Minor coarser-grained ilmenite is also present. The Usushwana ores are texturaly similar but contain abundant lamellar ilmenite in place of the ulvospinel. The ores from these two complexes cannot be beneficiated by conventional ore-dressing techniques, and would require direct metallurgical treatment for the recovery of iron, titania, and vanadium pentoxide [af

Bacterial bioleaching of low grade nickel limonite and saprolite ores by mixotrophic bacteria

Directory of Open Access Journals (Sweden)

Chaerun Siti Khodijah

2016-01-01

Full Text Available Utilization of indigenous bacteria should be considered to establish a successful biohydrometallurgical process. In this study, mixrotrophic iron-oxidizing bacterial consortia consisting of Comamonas testosteroni, Alicyclobacillus ferrooxydans and Pantoea septic which were isolated from Indonesian mineral ores were examined to determine their abilities to recover nickel from limonite and saprolite ores in the bioleaching experiments using stirred tank reactors. The nickel bioleaching experiments inoculated with the bacterial consortia were carried out using coarse limonite ores and weathered saprolite ores with pulp density of 10% w/v. Abiotic controls were also carried out replacing the inocula by the sterile medium. The bioleaching processes were monitored by measuring Ni and Fe contents and pH of the leaching solution as well as the total bacterial enzymatic activity measured as FDA hydrolytic activity. The effect of leaching on the mineralogy of laterite ores was investigated by the scanning electron microscope equipped with energy-dispersive spectroscopy (SEM-EDS and X-ray powder diffraction (XRD. After 28 days of incubation, the FDA hydrolytic activity was observed in both bioleaching experiments containing limonite (17.2 μg fluorescein/mL and saprolite ores (16.9 μg fluorescein/mL. The leached Ni and Fe in the bioleaching experiments containing limonite ores (30% Ni and 5.6% Fe was greater than that in abiotic controls (1% Ni and 0.1% Fe with the pH range of 2.5 to 3.5. However, the bacterial consortia were less capable of bioleaching of Ni (2.5% with the similar leached Fe (6% from the saprolite ores. In abiotic controls, the medium pH remained relatively constant (pH 6. It was concluded that these bacterial isolated as the consortium were capable of nickel bioleaching (precious metal more effectively than iron (gangue metal, thus being applicable to the commercial processing of the difficult-to-process low-grade nickel laterite ores

Dolochar as a reductant in the reduction roasting of iron ore slimes

Science.gov (United States)

Rath, Swagat S.; Rao, Danda Srinivas

2017-12-01

The present investigation examines the viability of dolochar, a sponge iron industry waste material, as a reductant in the reduction roasting of iron ore slimes, which are another waste generated by iron ore beneficiation plants. Under statistically determined optimum conditions, which include a temperature of 900°C, a reductant-to-feed mass ratio of 0.35, and a reduction time of 30-45 min, the roasted mass, after being subjected to low-intensity magnetic separation, yielded an iron ore concentrate of approximately 64wt% Fe at a mass recovery of approximately 71% from the feed iron ore slime assaying 56.2wt% Fe. X-ray diffraction analyses indicated that the magnetic products contain magnetite and hematite as the major phases, whereas the nonmagnetic fractions contain quartz and hematite.

Radioactivity of phosphate ores from Karatas-Mazidag phosphate deposit of Turkey

International Nuclear Information System (INIS)

Akyuez, T.; Varinlioglu, A.; Kose, A.; Akyuez, S.

2000-01-01

The specific activities of 238 U, 226 Ra, 232 Th and 40 K in the composite samples of phosphate ores of type I (grey-coloured ore, with high P 2 O 5 (21-35%) and low calcite content) and of type II (grey coloured calcite ore, with low P 2 O 5 content (5-17%)) of Karatas-Mazidag phosphate deposit, Turkey, have been determined by gamma spectrometry together with phosphatic animal feed ingredients. The concentrations of 238 U, 226 Ra, 232 Th and 40 K were found to be up to 557, 625, 26 and 297 Bq x kg -1 , respectively. Radium equivalent activities of samples were calculated and compared with those given in the literature. Uranium concentration of the individual phosphate samples, from which composite samples of ores of type I and II have been prepared, were found to show and increasing trend with increasing P 2 O 5 and F concentrations. (author)

Reconstruction of orientation of stresses acting in infinity within the Kovdor ore body based on field determinations

Directory of Open Access Journals (Sweden)

Rybin V. V.

2017-03-01

Full Text Available Mining Institute KSC RAS has conducted research which aim is to study the possibilities of increasing the tilt angles of pit walls in massifs of solid rock. One of the problems the solution of which will contribute to achieving this goal is to determine the direction of the maximum component of principal stresses in intact massif on the "infinity" necessary to work out mathematical models of rock massif including quarry recess. To solve this problem it has been proposed to use the results of parameters' measurement of stress state by the unloading method in near-wall rock massif. The basic research of near-wall rock massif has been conducted on mine quarry "Zhelezny" (JSC "Kovdor ore processing plant". The measurements have been performed by the discharge method in option of end measurements directly from the quarry ledges on special observation stations using horizontal wells. The direction of maximum compression acting in sub-meridional course in the Kovdor apatiteshtafelyte-baddeleite deposit (the Kovdor ore cluster has been determined by the conformal mapping method on the basis of experimental estimations of stress parameters in the rock massif. The results obtained are of great importance for assessing a level of stresses acting directly in a near open-pit zone. They are applied to set boundary conditions when modeling stress-strain state of near-wall rock massif and assess slope stability.

Modelling Of Monazite Ore Break-Down By Alkali Process Spectrometry

International Nuclear Information System (INIS)

Visetpotjanakit, Suputtra; Changkrueng, Kalaya; Pichestapong, Pipat

2005-10-01

A computer modelling has been developed for the calculation of mass balance of monazite ore break-down by alkali process at Rare Earth Research and Development Center. The process includes the following units : ore digestion by concentrate NaOH, dissolution of digested ore by HCl, uranium and thorium precipitation and crystallization of Na3PO4 which is by-product from this process. The model named RRDCMBP was prepared in Visual Basic language. The modelling program can be run on personal computer and it is interactive and easy to use. User is able to choose any equipment in each unit process and input data to get output of mass balance results. The model could be helpful in the process analysis for the further process adjustment and development

Underground Milling of High-Grade Uranium Ore

Energy Technology Data Exchange (ETDEWEB)

Edwards, C., E-mail: chuck.edwards@amec.com [AMEC Americas Limited, Saskatoon, Saskatchewan (Canada)

2014-05-15

There are many safety and technical issues involved in the mining and progressing of high grade uranium ores such as those exploited in Northern Canada at present. With more of this type of mine due to commence production in the near future, operators have been looking at ways to better manage the situation. The paper describes underground milling of high-grade uranium ore as a means of optimising production costs and managing safety issues. In addition the paper presents some examples of possible process flowsheets and plant layouts that could be applicable to such operations. Finally an assessment of potential benefits from underground milling from a variety of viewpoints is provided. (author)

Bioleaching of a manganese and silver Ore

International Nuclear Information System (INIS)

Porro, S.; Tedesco, P.H.; La Plata

1990-01-01

The bioleaching with a strain of Thiobacillus thiooxidans of the ore of Farallon Negro (Catamarca, Argentina) was studied in order to estimate its application to the solution and recovery of the manganese, and to improve the silver extraction. The State company which works the mine has not yet found an economical process to extract the manganese and has only reached a 30% efficiency in the recovery of silver by cianuration. The effects of pulp density variations and the addition of different quantities of FeS were analysed looking for the best working conditions. 74 μm (mesh Tyler 200) of ore particles were used because that is the size used in this plant for the cianuration process. (Author)

Evaluation of serpentine ore as a nuclear shielding material using gas chromatographic techniques

International Nuclear Information System (INIS)

Singh, B.N.; Unnikrishnan, E.K.; Kumar, Sangita D.

2007-01-01

Serpentine ore mixed with cement has been recognized as a candidate shielding material for use in nuclear reactors because of its many desirable properties. Therefore the assessment of serpentine ore for release of volatile gases during exposure to elevated temperatures, irradiation and changes in chemical composition, is essential. The present paper deals with the studies on the serpentine ores using gas chromatography and combustion gas chromatographic techniques. (author)

PGAA method for control of the technologically important elements at processing of sulfide ores

International Nuclear Information System (INIS)

Kurbanov, B.I.; Aripov, G.A.; Allamuratova, G.; Umaraliev, M.

2006-01-01

Full text: Many precious elements (Au, Re, Pt, Pd, Ag, Cu, Ni, Co, Mo) in ores mainly exist in the form of sulfide minerals and the flotation method is often used for processing of such kind of ores. To enhance the efficiency of the process it is very important to carry out the operative control of the elements of interest at various stages of ore processing. In this work the results of studies for developing methods for control of technologically important elements at processing and enrichment sulfide ores, which content the gold, copper, nickel, molybdenum in the ore-processing plants of Uzbekistan. The design of transportable experimental PGAA device on the basis of low-power radionuclide neutron source ( 252 Cf) with neutrons of 2x10 7 neutr/sec allowing to determine element content of the above named ores and their processing products is offered. It is shown that the use of the thermal neutron capture gamma-ray spectrometry in real samples and technological products allows prompt determination of such elements as S, Cu, Ti and others, which are important for flotation of sulfide ores. Efficiency control of the flotation processing of sulfide ores is based on quick determination of the content of sulfur and some other important elements at different stages of the process. It was found that to determine elements the following gamma lines are the most suitable - 840.3 keV for sulfur, 609 keV and 7307 keV for copper and 1381.5 keV, 1498.3 keV and 1585.3 keV for titanium. Based on the measurements of original ores, concentrates of various stages of flotation and flotation slime the possibility for prompt determination of S, Cu and Ti content and thus to get necessary information on the efficiency of the flotation process was shown. (author)

Ore-lead isotopes and Grenville plate tectonics

International Nuclear Information System (INIS)

Farquhar, R.M.; Fletcher, I.R.

1980-01-01

Recent advances in the 'whole earth' modelling of evolutionary processes of Pb isotopes shed light upon the origin of the metals found in various types of ore deposits. On the bases of these models and several recently published data sets, we believe that the ore deposits formed in various plate tectonic environments may carry 'isotopic fingerprints' which, when used with other characteristics such as mineral assemblages, may identify the depositional environments of many ore bodies. In the present study Pb-isotopic measurements have been made of a number of Precambrain mineralization types and localities throughout the Central Metasedimentary Belt of the Grenville Province. The data for individual deposits are at best ambiguous, but fall into two groups sufficiently distinctive to allow some degree of 'fingerprint' identification. Comparisons with data from other areas suggest that the major periods of sedimentation within the Central Metasedimentary Belt accompanied plate rifting and/or island arc tectonic activity, with most of the mineralized lead being derived from mantle sources. Detailed comparisons between the Grenville and other regions are uncertain, mainly because there are few detailed high-accuracy data sets from younger, tectonically unambiguous mineral occurrences. We suggest that once these data sets are availble, isotopic fingerprinting may become diagnostic for deposits ranging well back into the Precambrain

Radioactive equilibrium of uranium-bearing ores in some problems of applied geology

International Nuclear Information System (INIS)

Coulomb, R.; Girard, Ph.; Goldsztein, M.

1964-01-01

The state of equilibrium between several nuclides in radioactive relationship is determined with accuracy by the fundamental equations of radioactivity. It can be measured physically and expressed in suitable and internationally adopted units; Equilibrium - disequilibrium of uranium-bearing ores is a fairly complex phenomenon but the problem can be much simplified by well-chosen approximations in various practical field cases. The results of radiometric and radiochemical measurements lead to the interpretation of geochemical anomalies and may be used in the qualitative and quantitative estimation of uranium bearing deposits. (authors) [fr

Influence of attrition variables on iron ore flotation

Directory of Open Access Journals (Sweden)

Fabiana Fonseca Fortes

Full Text Available Abstract The presence of slimes is harmful to the flotation process: the performance and consumption of reagents are negatively affected. Traditionally, the desliming stage has been responsible for removing slimes. However, depending on the porosity of the mineral particles, desliming may not be sufficient to maximize the concentration results. An attrition process before the desliming operation can improve the removal of slime, especially when slimes cover the surface and/or are confined to the cavities/pores of the mineral particles. Attrition is present in the flowcharts of the beneficiation process of phosphate and industrial sand (silica sand. Research has been undertaken for its application to produce pre-concentrates of zircon and iron ore. However, there is still little knowledge of the influence of the attrition variables on the beneficiation process of iron ore. This study presents a factorial design and analysis of the effects of these variables on the reverse flotation of iron ore. The standard of the experimental procedures for all tests included the attrition of pulp, under the conditions of dispersion, desliming and flotation. The parameter analysed (variable response was the metallurgical recovery in reverse flotation tests. The planning and analysis of the full factorial experiment indicated that with 95% reliability, the rotation speed of the attrition cell impeller was the main variable in the attrition process of the iron ore. The percentage of solid variables in the pulp and the time of the attrition, as well as their interactions, were not indicated to be significant.

A New Direction for Biomining: Extraction of Metals by Reductive Dissolution of Oxidized Ores

Directory of Open Access Journals (Sweden)

Kevin B. Hallberg

2013-01-01

Full Text Available Biomining, the biotechnology that uses microorganisms to extract metals from ores and concentrates, is currently used exclusively for processing reduced ores and mine wastes. Metals of economic value also occur extensively in oxidized ores, such as nickel laterites. While these are not amenable to oxidative dissolution, the ferric iron minerals they contain can, in theory, be disrupted by iron reduction, causing associated metals to be released. We have harnessed the ability of the facultatively anaerobic, acidophilic bacterium Acidithiobacillus ferroooxidans to couple the oxidation of elemental sulphur to the reduction of ferric iron in the goethite fraction of a limonitic nickel ore at 30 °C. Nickel and other metals (Co, Cr and Mn were effectively solubilised and maintained in solution due to the low pH (1.8 of the leach liquor. The results highlight the potential for the bioprocessing of oxidized, iron-rich ores using an approach that is energy-saving and environmentally-benign compared with metallurgical processes currently applied to the extraction of Ni from lateritic ores.

Flotation of uranium from uranium ores in Canada. Part 2

International Nuclear Information System (INIS)

Muthuswami, S.V.; Vijayan, S.; Woods, D.R.

1985-01-01

Measurements are reported for the equilibrium of cupferron from solutions by uranium oxide, quartz, illite, a mixture of these three, pitchblende, pyrite and brannerite ore. The cupferron concentration ranged from 1 to 6 g/L, and the pH was 7 and 8. Most isotherms followed the Langmuir model, although Freundlich behaviour was observed for illite and pitchblende. Most adsorption was pH independent except for illite and pitchblende. The adsorption isotherms for a mixture of uranium oxide, quartz and illite in the same proportions as in the naturally occurring ore agreed with the adsorption of the pyrite-free ore at pH 8 but not pH 7. We attribute the discrepancy to the use of illite as the model clay. The specific adsorption of cupferron on quartz and illite is lower by a factor of about 50 and 5, respectively, than the adsorption on uranium oxide. Specific adsorption less than 1 mg cupferron per gm of pyrite free ore does not float the mineral. The corresponding equilibrium concentration of cupferron is 0.5 g/L. A qualitative model is given, and the implications of this work for practical operations are presented

36Cl production in situ, and groundwater transport in a uranium ore deposit

International Nuclear Information System (INIS)

Cornett, R.J.; Andrews, H.R.; Brown, R.M.; Chant, L.A.; Cramer, J.; Davies, W.G.; Greiner, B.F.; Imahori, Y.; Koslowsky, V.T.; McKay, J.W.; Milton, G.M.; Milton, J.D.C.

1992-01-01

The authors have used AMS to measure 36 Cl concentrations produced in situ in ore and in groundwater within the 1.3 billion year old Cigar Lake uranium ore deposit. 36 Cl concentrations are up to 300 times higher in the ore zone than in the surrounding aquifer. Based on 36 Cl ingrowth, the authors calculate the residence time of water within the ore zone to be 100,000 to 300,000 years. Since the geologic setting of this deposit is a very close natural analogue to a proposed nuclear fuel waste repository, this analysis demonstrates that natural geological barriers can effectively isolate mobile radionuclides from an open, regional groundwater flow system over millennia

The recovery of gold from refractory ores by the use of carbon-in-chlorine leaching

Science.gov (United States)

Greaves, John N.; Palmer, Glenn R.; White, William W.

1990-09-01

Recently, the U.S. Bureau of Mines examined the recovery of gold by chlorination of refractory carbonaceous and sulfidic ores, comparing various treatment methods in which a ground ore pulp is contacted with chlorine gas and activated carbon is added to the pulp for a carbon-in-chlorine leach (CICL). The objective of this research was to demonstrate the basic feasibility of CICL technology. Results showed that the organic carbon deactivating environment of CICL lowers, but does not eliminate, the adsorption of gold on activated carbon. In this environment, the refractory ore is altered, and gold is extracted and then recovered on activated carbon. With highly carbonaceous ores, CICL achieved a higher recovery than with primarily sulfidic refractory ores. Basic cyanide amenability testing of two carbonaceous ores achieved recoveries of only 5.5% and 46%. With CICL treatment, recoveries on carbon were 90% and 92%.

Crosslinking of SAVY-4000 O-rings as a Function of Aging Conditions

Energy Technology Data Exchange (ETDEWEB)

Van Buskirk, Caleb Griffith [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-09-08

SAVY-4000 containers were developed as a part of DOE M 441.1-1 to protect workers who handle stored nuclear material from exposure due to loss of containment.1 The SAVY-4000 is comprised of three parts: a lid, a container, and a cross-linked fluoropolymer O-ring. Degradation of the O-ring during use could limit the lifetime of the SAVY-4000. In order to quantify the chemical changes of the Oring over time, the molecular weight between crosslinks was determined as a function of aging conditions using a swelling technique. Because the O-ring is a cross-linked polymer, it will absorb solvent into its matrix without dissolving. The relative amount of solvent uptake can be related to the degree of crosslinking using an equation developed by Paul Flory and John Rehner Jr3. This method was used to analyze O-ring samples aged under thermal and ionizing-radiation conditions. It was found that at the harsher thermal gaining conditions in absence of ionizing-radiation the average molecular weight between crosslinks decreased, indicating a rise in crosslinks, which may be attributable to advanced aging with no ionizing radiation present. Inversely, in the presence of ionizing radiation it was found that material has a higher level of cross-linking with age. This information could be used to help predict the lifetime of the O-rings in SAVY-4000 containers under service conditions.

Sintering of manganese ore in natura with different additions on activated carbon

International Nuclear Information System (INIS)

Lima, M.M.F.; Mapa, T.F.M.; Lima, R.M.F.

2016-01-01

Full text: The shortage of high grade manganese ore and the importance of economically viable processes suggest a necessity of the recovery of ore residues. So, this work presents a route to obtain by-products of economic interest from manganese ore residues in bench scale. The objective was the sintering of manganese ore in natura using a particle size below 0,037μm with different additions of activated carbon. For this, the fine residues were calcined at 800°C during 60 minutes, homogenized in an agate mortar with 12% humidity and additions of 9 and 12% of activated carbon. After homogenization, the sintering process was carried out at 1145°C and 1155°C during 5, 15 and 30 minutes at natural air. The products sintered were characterized by bulk density, BET surface area, OM, SEM / EDS and diffraction X-rays. During the calcination of the ore, the mass loss was (15.16 ± 0.02)% due to the elimination of volatiles and water. The surface area of the ore was reduced due to the diffusion process that occurred during sintering. While, the bulk density values had little variation, around (3.51 ± 0.06)g/cm³. The analyses of micro-regions EDS showed that the matrix is a silicate with a high Mn content. It was identified yet, other silicates with different proportions of Si, Al, Ti, Na, Mn, Mg and Ca. (author)

Sintering of manganese ore in natura with different additions on activated carbon

Energy Technology Data Exchange (ETDEWEB)

Lima, M.M.F.; Mapa, T.F.M.; Lima, R.M.F. [Universidade Federal de Ouro Preto (UFOP), MG (Brazil)

2016-07-01

Full text: The shortage of high grade manganese ore and the importance of economically viable processes suggest a necessity of the recovery of ore residues. So, this work presents a route to obtain by-products of economic interest from manganese ore residues in bench scale. The objective was the sintering of manganese ore in natura using a particle size below 0,037μm with different additions of activated carbon. For this, the fine residues were calcined at 800°C during 60 minutes, homogenized in an agate mortar with 12% humidity and additions of 9 and 12% of activated carbon. After homogenization, the sintering process was carried out at 1145°C and 1155°C during 5, 15 and 30 minutes at natural air. The products sintered were characterized by bulk density, BET surface area, OM, SEM / EDS and diffraction X-rays. During the calcination of the ore, the mass loss was (15.16 ± 0.02)% due to the elimination of volatiles and water. The surface area of the ore was reduced due to the diffusion process that occurred during sintering. While, the bulk density values had little variation, around (3.51 ± 0.06)g/cm³. The analyses of micro-regions EDS showed that the matrix is a silicate with a high Mn content. It was identified yet, other silicates with different proportions of Si, Al, Ti, Na, Mn, Mg and Ca. (author)

Fuzzy control of the iron ore pellets thermal treatment on a conveying car

Directory of Open Access Journals (Sweden)

В’ячеслав Йосипович Лобов

2017-07-01

Full Text Available The purpose of this article is to solve the problem of fuzzy control of iron ore pellets thermal treatment on a conveyor roasting machine, to build an automated control system of conveyor roasting machine and perform simulation and to present the results of research. According to the structural scheme of the fuzzy control an automated control system is proposed for being modelled. This is done by using the software MATLAB. The use of atomic emission spectroscopy determines the percentage of the major elements in iron ore pellets considering the main process parameters. This article uses an automated system of fuzzy control of iron ore pellets firing on a conveyor roasting machine with the introduction of atomic emission spectroscopy of the pellets. Development and practical implementation of fuzzy control will improve their quality by taking into account the basic parameters of thermal treatment of pellets such as speed of movement of the grate trucks, gas flow rate, the height of the layer of pellets and the venting speed of the pellets layer with gas-air flow, humidity, average diameter, the basicity and the iron composition in the pellets. The expediency of the developed method of using automated fuzzy control system of iron ore pellets firing on a conveyor roasting car has been proved. The system with fuzzy controller provides a reduction on average 2 m3/h, which is 0,3% of natural gas consumption as compared to the existing systems. This provides more uniform gas permeability of the layer of pellets, which leads to filtration rate increase of the gas flow and to heat exchange intensification in the layer of pellets. It makes it possible to introduce the atomic emission spectroscopy of non-burned pellets and to increase the productivity of conveyor roasting machine by 2,5%. At the same time the resistance of technological equipment (pallets increases, due to more uniform distribution of the thermal field

Commercial test on uranium ore percolation leaching in Fuzhou uranium mine

International Nuclear Information System (INIS)

Cai Chunhui

2002-01-01

Commercial test on uranium ore percolation leaching was carried out according to ore characteristics of Fuzhou Uranium Mine and results from small test. Technological and economic indexes, such as leaching rate, acid consumption, leaching cycle, etc. are discussed. The general idea applying the test results to commercial production is presented, too

Some methodical questions of study of vertical geochemical zoning of ore deposits

International Nuclear Information System (INIS)

Sochevanov, N.N.; Gorelova, E.K.

1975-01-01

Taking a hydrothermal uranium deposit as an example, the advisability of dividing ore-localizing structures (for the purpose of making a calculation for a single geochemical zonality) into five zones, a supra-, an upper, a central, a lower and an infra-ore one, has been shown. It is recommended to determine the place of elements in the geochemical zonality sequence by taking into account the productivity of their aureoles and the location of the centre of gravity of their reserves in the ore, supra- and infra-ore horizons. When considering the peculiarities of a zonality, it is irrational to take account of elements determined with an insufficient sensitivity as well as of low-contrast or unstable ones. When calculating tracer ratios the most contrasting data can be obtained by using the most distant elements in the geochemical zonality sequence

A Review on New Technological Progress for Beneficiation of Refractory Phosphate Ore in China

Science.gov (United States)

Dong, Xu; Siqing, Liu; Yanqing, Yao; Hailin, Liu; Yi, Pei

2017-05-01

The world is rich in phosphate resources, but the vast majority of the resources are of middle and low grade ores, and it is difficult to obtain high grade concentrate at a high recovery by using traditional separation methods. In this paper, the distribution and flotation processes of typical phosphate ores in China are introduced. Considering the current situation in phosphate ore beneficiation both home and abroad, the new trend of processing technology and reagents in China are summarized. Flotation is still regarded as the main processing method in phosphate ore beneficiation for a certain time in near future.

IAEA sends out samples of uranium ore

Energy Technology Data Exchange (ETDEWEB)

NONE

1966-06-15

Full text: Governments and organizations interested in developing uranium resources will be assisted by a new service, now being inaugurated by the Agency's laboratories, for the distribution of reference samples of uranium ores. This is an addition to the service which began at Seibersdorf in January 1962 for the distribution of calibrated radionuclides, and which has met with a steadily increasing demand. * Uranium deposits consisting of ores with a uranium content in the range 0.5 - 0.05 per cent occur in a number of countries, including developing countries and can present considerable analytical difficulties. In 1962 the Agency asked Member States whether they would be interested in receiving reference samples of uranium ores to assist them in checking their methods of chemical analysis. The response encouraged the Agency to proceed. There is a multiplicity of types of uranium ores and, initially, three of the most commonly occurring have been selected - torbernite, uraninite and carnotite. Member States have provided the laboratory with supplies of these three types of ore. In order to determine the uranium content, samples are sent to leading laboratories throughout the world, so as to arrive at the most accurate values possible. This work has proved to be useful to the laboratories themselves ; in searching for reasons for discrepancies between the different collaborating laboratories, they enlarge their own knowledge and improve their methods. The reference samples are sent out in the form of fine powder, and are available to atomic energy commissions, research laboratories or mining companies. The requesting laboratory, having worked out the analytical process best suited to its needs, is then able to check its results by analysing an IAEA reference sample of known uranium content. By the end of 1966, reference samples will be available of the three ores mentioned, and later also of pure uranium oxide and of uranium oxide containing trace impurities, the

Preparation of ore blocks for mine leaching by reagent explosion injection

Science.gov (United States)

Shevchenko, YuS

2017-02-01

The current drilling-and-blasting operations fail to prepare intact ore body underlying a production horizon for subsequent mining and leaching. It is found that the required preparation quality is possible by means of advanced implementation of ore body discontinuity and filling of the resultant system of joints with active leaching solutions.

British strong-acid leach process targeted at refractory uranium ores

International Nuclear Information System (INIS)

Anon.

1975-01-01

The UKAEA-patented strong-acid leach process for refractory U ores is briefly outlined with emphasis on its variations from the conventional dilute-acid process and the projected economics for a processing plant using this process. The process uses 6N H 2 SO 4 with a sharply reduced leaching time over conventional processes. The solubilized U is removed by percolation and the use of only about 10 percent liquid produces less effluent. Conventional processing plant equipment can be used except at the feed preparation, acid mixing, curing, and washing stages. Ore can be processed at larger grain sizes and the milling is done in a dry rod mill. Alternatives to the percolation removal of U are listed. Other work being done by UKAEA on U recovery from ores is briefly indicated. (U.S.)

The relationship between tectonic-thermal evolution and sandstone-type uranium ore-formation in Ordos basin

International Nuclear Information System (INIS)

Zhao Honggang

2005-01-01

The comprehensive study of the volcanic activities, the geothermal field, the thermal flow field, the paleogeo-thermal activity and the tectonic evolution of the Ordos basin indicates that the tectonic-thermal evolution of the Ordos basin has offered the basis for the fluid-fluid and fluid-rock mutual reactions, and has created favourable conditions for the formation of organic mineral resources and sandstone-type uranium deposits. Especially, the tectonic-thermal event during middle-Late Jurassic to Cretaceous played an important role in providing uranium source material, and assisting the migration, the concentration and precipitation of uranium and uranium ore-formation. (authors)

Development document for the effluent limitations and guidelines for the ore mining and dressing point source category. Volume I. Final report

International Nuclear Information System (INIS)

Jarrett, B.M.; Kirby, R.G.

1978-07-01

To establish effluent limitation guidelines and standards of performance, the ore mining and dressing industry was divided into 41 separate categories and subcategories for which separate limitations were recommended. This report deals with the entire metal-ore mining and dressing industry and examines the industry by ten major categories: iron ore; copper ore; lead and zinc ores; gold ore; silver ore; bauxite ore; ferroalloy-metal ores; mercury ores; uranium, radium and vanadium ores; and metal ores, not elsewhere classified ((ores of antimony, beryllium, pltinum, rare earths, tin, titanium, and zirconium). The subcategorization of the ore categories is based primarily upon ore mineralogy and processing or extraction methods employed; however, other factors (such as size, climate or location, and method of mining) are used in some instances. With the best available technology economically achievable, facilities in 21 of the 41 subcategories can be operated with no discharge of process wastewater to navigable waters. No discharge of process wastewater is also achievable as a new source performance standard for facilities in 21 of the 41 subcategories

Uranium R and D directed to low-grade ores

International Nuclear Information System (INIS)

Anon.

1976-01-01

The treatment of depleted uranium ores by in-situ leaching and by counterflow ion exchange in the USA is described. In-situ leaching is mainly suitable for sandstone deposits. The research was originally focused on leaching with an acid and with carbonates. Phosphoric acid appears to be a promising leaching agent. The equipment for continuous ion exchange may be used for sludge processing but the application depends on the type of equipment and mineralogy of processed ores. The method is advantageous for lower capital costs and for smooth operation. Ion exchange is also used for uranium extraction from mine waters in the USA as well as in Canada. For example, in Grants, New Mexico, a yield exceeding 90% was reached in mine waters only containing 5 to 7 ppm U 3 O 8 . In the future, the treatment of ores with a low uranium content will require more selective extraction methods in view of the more stringent technical conditions of uranium concentrate processing. (J.P.)

Integrated 3D Geological Modeling to Gain Insight in the Effects of Hydrothermal Alteration on Post-Ore Deformation Style and Strain Localization in the Flin Flon Volcanogenic Massive Sulfide Ore System

Directory of Open Access Journals (Sweden)

Ernst Schetselaar

2017-12-01

Full Text Available 3D geological modeling of lithogeochemical and geological data provides insight into the role of the sulfide ore horizon and associated footwall hydrothermal alteration in localizing shear strain in the Flin Flon volcanogenic massive sulfide deposits, Canada, as deformation evolved from brittle-ductile to ductile regimes during collisional stages of the 1.9–1.8 Ga Trans-Hudson orogeny. 3D spatial characterization of hydrothermal alteration based on the Ishikawa index (AI and normative corundum percentages outline sericite + chlorite-rich high strain zones, consisting of Al-enriched and Na-depleted felsic and mafic volcanic rocks in the footwall of the sulfide ore horizon. The hydrothermal vent complex, from which these sheared alteration zones originated, was stacked together with the ore horizon by W-vergent thrust faults during an early collisional deformation regime, imbricating molasse-type clastic sediments with the ore-hosting volcanic and volcaniclastic rocks of the Flin Flon arc assemblage. Chlorite-rich planar zones marked by high values of the Carbonate–chlorite–pyrite index (CCPI are laterally more extensive and outline a later system of ductile shear zones, in which phyllosilicates, quartz and chalcopyrite in stringer zones localized shear strain and enhanced transposition of the hydrothermal vent stockwork. The contrasting deformation styles of these two thrusting events and their localization within the ore horizon and hydrothermal vent stockwork have important implications for vectoring towards undiscovered ore in this mature mining camp that are possibly also relevant to other strongly deformed VMS ore systems.

The study of ore minerals parageneses in Ponorogo area, East Java

Directory of Open Access Journals (Sweden)

Wiwik Dyah Hastuti Endang

2017-01-01

Full Text Available The present study was undertaken in the Southern Mountain Range of East Jawa, Ponorogo District. Tectonically, the region extends along the Magmatic Sunda-Banda Arc, which comprises predominantly volcanic rocks of Mandalika Formation, sedimentary rock units of Arjosari Formation, and intrusive sequences such as dacite, andesite and diorite. Structurally, the region is controlled by faults striking NE-SW, NW-SE and N-S. Mandalika Formation and Arjosari Formation have an interfingering relation and are Oligo-Miocene. Results of the field observation and analyses of petrography and mineragraphy on outcrops reveal that the region has commonly undergone alteration and mineralisation. The principle ore minerals occurring in the Ponorogo area are pyrite and sphalerite with abundant mineral assemblages of chalcopyrite, magnetite, hematite, galena, covelite, bornite, and limonite. Mineralisation occurs in argillic zone and subprophyllitic zone. Based on textures, structures and ore mineral assemblages, mineralisation in the study area can be devided at least into two stages. The earlier stage was present in relation to hypogene processes, and resulted in pyrite–sphalerite–chalcopyrite–magnetite– galena. The subsequent stage took place due to supergene enrichment processes, and yielded pyrite– sphalerite–covelite–bournite–limonite. Such mineral assemblages suggest that they are formed at temperatures of about 100–360° C.

On stages of hydrothermal mineralization of molybdenum-uranium ore manifestation in volcanic edifice

International Nuclear Information System (INIS)

Yakovlev, P.D.; Mamotin, S.A.

1976-01-01

Volcanogenic-intrusive complex of the ore manifestation region is represented by various facies of liparite and granitoid formation rocks. Numerous dislocations with breaks in continuity and the corresponding feathering fissures relate to 3 stages of hydrothermal mineralization of rocks. Quartz-sericite-kaolin metasomatites were formed at the earlier (volcanic) stage. Tourmalinization was associated with the middle stage which accompanied the granitoid intrusive formation. The later mineralization stage was accompanied by formation of beresites and molibdenum-uranium ores. Identification was controlled by the dislocation, ore bodies had the shape of lens, vein or small nest. 7 stages separated by shores were identified at the ore stage: quartz-sericite pyritic; quartz-pyrite-arsenopyritic; sulfide-pitchblendic; chalcedonic; ankeritic; quartz-calcitic and pyrite-ankeritic

Development of the Facility for Transformation of Magnetic Characteristics of Weakly Magnetic Oxidized Iron Ores Related to Improvement of Technologies for Iron Ore Concentrate Production

Directory of Open Access Journals (Sweden)

Ponomarenko, O.M.

2016-01-01

Full Text Available New facility for continuous registration of iron ore magnetization depending on temperature by heating of iron ores upon reducing conditions was created. Facility allows to register the processes of transformation of weakly magnetic minerals into strongly magnetic ones under the influence of reducing agents and temperature, as well as to determine the Curie temperature of the minerals. Using created facility it was shown, that heating of goethite and hematite in the presence of 4 % of starch in the temperature range of 300—650 °С leads to significant increase of magnetization of the samples. X-Ray diffraction confirmed that under indicated conditions the structure of hematite and goethite is transformed into magnetite structure. Obtained results open up new possibilities for the development of effective technologies for oxidized iron ore beneficiation.

Corrosion behavior of austempered ductile iron (ADI) in iron ore slurry

African Journals Online (AJOL)

Corrosion behavior of austempered ductile iron (ADI) in iron ore slurry was studied as a function of the microstructure developed by austempering at 380 and 300°C for different exposure time in the slurry. The corrosion rates of the ADI balls immersed in the iron ore slurry was determined using weight loss method.

Ore minerals textural characterization by hyperspectral imaging

Science.gov (United States)

Bonifazi, Giuseppe; Picone, Nicoletta; Serranti, Silvia

2013-02-01

The utilization of hyperspectral detection devices, for natural resources mapping/exploitation through remote sensing techniques, dates back to the early 1970s. From the first devices utilizing a one-dimensional profile spectrometer, HyperSpectral Imaging (HSI) devices have been developed. Thus, from specific-customized devices, originally developed by Governmental Agencies (e.g. NASA, specialized research labs, etc.), a lot of HSI based equipment are today available at commercial level. Parallel to this huge increase of hyperspectral systems development/manufacturing, addressed to airborne application, a strong increase also occurred in developing HSI based devices for "ground" utilization that is sensing units able to play inside a laboratory, a processing plant and/or in an open field. Thanks to this diffusion more and more applications have been developed and tested in this last years also in the materials sectors. Such an approach, when successful, is quite challenging being usually reliable, robust and characterised by lower costs if compared with those usually associated to commonly applied analytical off- and/or on-line analytical approaches. In this paper such an approach is presented with reference to ore minerals characterization. According to the different phases and stages of ore minerals and products characterization, and starting from the analyses of the detected hyperspectral firms, it is possible to derive useful information about mineral flow stream properties and their physical-chemical attributes. This last aspect can be utilized to define innovative process mineralogy strategies and to implement on-line procedures at processing level. The present study discusses the effects related to the adoption of different hardware configurations, the utilization of different logics to perform the analysis and the selection of different algorithms according to the different characterization, inspection and quality control actions to apply.

Leaching of U, 230Th and 226Ra from Saskatchewan uranium ore after removing clay

International Nuclear Information System (INIS)

Muthuswami, S.V.; Mohd Yunus, M.Z.; Mohamad Nor, M.I.; Kassim, Z.A.; Nirdosh, I.

1993-01-01

Distribution of U, 230 Th and 226 Ra in various size fractions in a typical Saskatchewan uranium ore and its resultant mill tailings indicated that less than 4% of these radionuclides were present in the fine ≤ 45 μm) size fraction in the ore whereas their concentration in the similar size fraction in the tailings was > 80%. Removal of clay minerals from the ore by flotation was unsuccessful whereas sedimentation gave nearly complete removal. Leaching of 230 Th from the ore before and after removing clay minerals indicated that dissolution of 230 Th was mproved at higher E h and acidity of the leaching medium and that it was independent of the presence of clay minerals in the ore. (orig.) [de

Genesis of iron-apatite ores in Posht-e-Badam Block (Central Iran) using REE geochemistry

Science.gov (United States)

Mokhtari, Mir Ali Asghar; Zadeh, Ghader Hossein; Emami, Mohamad Hashem

2013-06-01

Rare earth elements in apatites of different ore types show characteristic patterns which are related to different modes of formation of the ores. Most of the apatite-bearing iron ores are associated with alkaline magmas with LREE/HREE fractionation varying from moderate to steep. Iron-apatite deposits in Posht-e-Badam Block (Central Iran) have a high concentration of REE (more than 1000 ppm up to 2.5%), and show a strong LREE/HREE ratio with a pronounced negative Eu anomaly. This REE pattern is typical of magmatic apatite and quiet distinct from sedimentary apatites (phosphorites) which have a low REE contents and Ce negative anomalies. On the other hand, they are comparable to the REE patterns of apatites in Kiruna-type iron ores in different parts of the world. The REE patterns of apatites, iron-apatite ores and iron ores are similar and only have different REE contents. This similarity indicates a genetic relation for these rocks. Most of the iron-apatite deposits in Central Iran have similar REE patterns too, which in turn show a genetic relation for all of these deposits. This similarity indicates a similar origin and processes in their genesis. There are some small intrusions around some of the iron-apatite deposits that are petrographically identified as syenite and gabbro. These intrusions also have REE patterns similar to that of iron-apatite ores. This demonstrates a genetic relation between these intrusions and iron-apatite ores. The REE patterns of apatites in different deposits of Posht-e-Badam Block iron-apatite ores show an affinity to alkaline to sub-alkaline magmas and rifting environment. The alkaline host rocks of Central Iran iron-apatite ores are clearly related to an extensional setting where rifting was important (SSE-NNW fault lines). A probable source for this large scale ore forming processes is relatively low partial melting of mantle rocks. The ores have originated by magmatic differentiation as a late phase in the volcanic cycle

Can micro-PIXE measurements help to determine ore genesis ?

International Nuclear Information System (INIS)

Ahmed, M.; Al-Ohali, M.A.

2002-01-01

This study is an attempt to demonstrate how the nuclear micro-PIXE technique can be utilized to investigate ore genesis of geological deposits. Elemental concentrations and distribution profiles in single mineral grains and matrices in a present-day ore deposit on land were measured using the scanning proton microprobe on the 3 MV Tandetron accelerator at King Fahd University of Petroleum and Minerals. Comparing the distribution profiles of some of the trace elements detected it was possible to suggest an organic, sea origin of these deposits. (Author)

Ore controlling oxidized zonation epigenetic uranium-coal deposits and regularities in lignite transformations

International Nuclear Information System (INIS)

Uspenskij, V.A.; Kulakova, Ya.M.

1982-01-01

Complex of analytical methods was used to study epigenetic transformations in uranium-coal ore manifestation. To clarify the principle scheme of oxidized zonation in coals the materials, related to three similar objects were used. When comparing obtained epigenetic column with columns of similar ore objects the principle scheme of oxidized epigenetic zonation for ancient infiltration uranium-coal deposits was specified; general regularities of eignite transformations and characteristics of profile distribution of uranium and accessory metal zonations were revealed. Infiltration processes, proceeded in coal measureses, formed the steady epigenetic oxidized zonation: O - zone of barren unoxidized coals, 1 - zone of ore-bearing unoxidized coals, 2 - zone of weakly ore-bearing oxidized coals, 3 - zone of oxidized terrigenous rocks with zonules of development of yellow and red iron hydroxides. Capacities of some zones and zonules reflect the intensity and duration of ore-forming processes. Distribution of U and accessory elements obeys completely epigenetic zonation. It is assumed, that ancient infiltration uranium-coal deposits formed due to weakly uranium-bearing oxygen-containing waters

Discourse characteristics of ore-bearing aquifer of Chaidenghao in Husiliang area

International Nuclear Information System (INIS)

Zhou Bowen

2012-01-01

Call Sri Lanka article focuses primarily on wood board beam region trench features lots of ore-bearing aquifer, located in the ore-bearing aquifer under Zhiluo lower sub-section; A brief introduction to the work area's geology and stratigraphic structure, and a brief description of the main ore purpose of the lower layer Zhiluo under sub-section lithology; Shows aquifer top, bottom and described its characteristics, the two formed a 'watertight-water-impermeable' good hydrogeological structure of the ancient interlayer oxidation zone formation to create a favorable space. Based on the above description and analysis of the location of uranium mineralization in good condition, have a good vision of the mineralization. (author)

Deformation Characteristics and Sealing Performance of Metallic O-rings for a Reactor Pressure Vessel

Directory of Open Access Journals (Sweden)

Mingxue Shen

2016-04-01

Full Text Available This paper provides a reference to determine the seal performance of metallic O-rings for a reactor pressure vessel (RPV. A nonlinear elastic-plastic model of an O-ring was constructed by the finite element method to analyze its intrinsic properties. It is also validated by experiments on scaled samples. The effects of the compression ratio, the geometrical parameters of the O-ring, and the structure parameters of the groove on the flange are discussed in detail. The results showed that the numerical analysis of the O-ring agrees well with the experimental data, the compression ratio has an important role in the distribution and magnitude of contact stress, and a suitable gap between the sidewall and groove can improve the sealing capability of the O-ring. After the optimization of the sealing structure, some key parameters of the O-ring (i.e., compression ratio, cross-section diameter, wall thickness, sidewall gap have been recommended for application in megakilowatt class nuclear power plants. Furthermore, air tightness and thermal cycling tests were performed to verify the rationality of the finite element method and to reliably evaluate the sealing performance of a RPV.

Thermodynamic Analysis of the Selective Reduction of a Nickeliferous Limonitic Laterite Ore by Hydrogen

Science.gov (United States)

Elliott, R.; Pickles, C. A.

2017-09-01

Nickeliferous limonitic laterite ores are becoming increasingly attractive as a source of metallic nickel as the costs associated with recovering nickel from the sulphide ores increase. Unlike the sulphide ores, however, the laterite ores are not amenable to concentration by conventional mineral processing techniques such as froth flotation. One potential concentrating method would be the pyrometallurgical solid state reduction of the nickeliferous limonitic ores at relatively low temperatures, followed by beneficiation via magnetic separation. A number of reductants can be utilized in the reduction step, and in this research, a thermodynamic model has been developed to investigate the reduction of a nickeliferous limonitic laterite by hydrogen. The nickel recovery to the ferronickel phase was predicted to be greater than 95 % at temperatures of 673-873 K. Reductant additions above the stoichiometric requirement resulted in high recoveries over a wider temperature range, but the nickel grade of the ferronickel decreased.

Utilizing a Value of Information Framework to Improve Ore Collection and Classification Procedures

National Research Council Canada - National Science Library

Phillips, Julia A

2006-01-01

.... We use a value of information framework (VOI) to consider the economic feasibility of a mine purchasing additional information on extracted ore type to reduce the uncertainty of extracted ore grade quality...

Gas migration characteristics of highly compacted bentonite ore

International Nuclear Information System (INIS)

Tanaka, Yukihisa; Hironaga, Michihiko

2010-01-01

In the current concept of repository for radioactive waste disposal, compacted bentonite will be used as an engineered barrier mainly for inhibiting migration of radioactive nuclides. Hydrogen gas can be generated inside the engineered barrier by anaerobic corrosion of metals used for containers, etc. If the gas generation rate exceeds the diffusion rate of dissolved gas inside of the engineered barrier, gas will accumulate in the void space inside of the engineered barrier until its pressure becomes large enough for it to enter the bentonite as a discrete gaseous phase. It is expected to be not easy for gas to entering into the bentonite as a discrete gaseous phase because the pore of compacted bentonite is so minute. Gas migration characteristics of highly compacted powdered bentonite are already reported by CRIEPI. In this report, gas migration characteristics of bentonite ore, which is a candidate for construction material of repository for radioactive waste, is investigated. The following conclusions are obtained through the results of the gas migration tests which are conducted in this study: 1) When the total gas pressure exceeds the initial total axial stress, the total axial stress is always equal to the total gas pressure because specimens shrink in the axial direction with causing the clearance between the end of the specimen and porous metal. By increasing the gas pressure more, gas breakthrough, which defined as a sudden and sharp increase in gas flow rate out of the specimen, occurs. Therefore gas migration mechanism of compacted bentonite ore is basically identical to that of compacted powdered bentonite. 2) Hydraulic conductivity measured after the gas breakthrough is somewhat smaller than that measured before the gas migration test. This fact means that it might be possible to neglect decline of the function of bentonite as engineered barrier caused by the gas breakthrough. These characteristics of compacted bentonite ore are identical to those of

Thirty years of uranium ore processing in Spain

International Nuclear Information System (INIS)

Josa, J.M.

1982-01-01

Spanish background in the uranium ore processing includes ores from pegmatitic type deposits, vein deposits, sandstone, enrichments in metamorphic rocks, radioactive coals and non-conventional sources of uranium, such as wet phosphoric acid or copper liquors. Some tests have also done in order to recover uranium from very low grade paleozoic quartzites. We have also been involved in by-products recovery (copper) from uranium ores. The technologies that have been used are: physical concentration, combustion and roasting, conventional alkaline or acid methods, pressure, heap and bacteria leaching. Special attention was paid to recover uranium from the pregnant liquors and to develop suited equipment for it; solvent extraction and continuous ion exchange equipment was carefully studied. We have been involved in commercial size (500-3000 t/d) mills, but we have also developed transportable and reussable modular plants specially designed and suited to recover uranium from small and isolated deposits. In both cases the reduction of the environmental impact was taken in account. Spanish experience also includes nuclear purification aspects in order to get uranium nuclear compounds (ADU, UO 2 , UF 4 and UF 6 ). Wet (nitric-TBP) and dry (Fluid-bed) methods have been used. The best of these 30 years of experience in studies and in industrial practice, together with our new developments towards the future, could become in a good contribution for the medium size countries which are going to develop its own uranium industry. The way for these countries could be easier if they know what is valuable and what must be avoid in the uranium ore processing development. In this aim the whole paper was thought and written. (author)

Effectiveness acidic pre-cleaning for copper-gold ore

Directory of Open Access Journals (Sweden)

Antonio Clareti Pereira

Full Text Available Abstract The presence of copper-bearing minerals is known to bring on many challenges during the cyanidation of gold ore, like high consumption of cyanide and low extraction of metal, which are undesirable impacts on the auriferous recovery in the subsequent process step. The high copper solubility in cyanide prevents the direct use of classical hydrometallurgical processes for the extraction of gold by cyanidation. Additionally, the application of a conventional flotation process to extract copper is further complicated when it is oxidized. As a result, an acid pre-leaching process was applied in order to clean the ore of these copper minerals that are cyanide consumers. The objective was to evaluate the amount of soluble copper in cyanide before and after acidic cleaning. From a gold ore containing copper, the study selected four samples containing 0.22%, 0.55%, 1.00% and 1.36% of copper. For direct cyanidation of the ore without pre-treatment, copper extraction by cyanide complexing ranged from 8 to 83%. In contrast, the pre-treatment carried out with sulfuric acid extracted 24% to 99% of initial copper and subsequent cyanidation extracted 0.13 to 1.54% of initial copper. The study also showed that the copper contained in the secondary minerals is more easily extracted by cyanide (83%, being followed by the copper oxy-hydroxide minerals (60%, while the copper contained in the manganese oxide is less complexed by cyanide (8% a 12%. It was possible to observe that minerals with low acid solubility also have low solubility in cyanide. Cyanide consumption decreased by about 2.5 times and gold recovery increased to above 94% after acidic pre-cleaning.

Hydrogeochemical radioactive features and prospecting in granopegmatite type uranium ore district in Danfeng area

International Nuclear Information System (INIS)

Feng Zhangsheng

2011-01-01

Hydrochemical radioactive prospecting plays an important role in the all stages of grano-pegmatite type uranium deposit exploration in Danfeng area dut to its fast, simple, economic and high effective advantage. Radioactive anomalous halo in the shallow underground water has identical distribution scopes with the ore-bearing biotite granite-pegmatite, which can be used to delineate uranium ore-forming prospective area, reconnaissance area and detailed prospecting area. Deep underground water close to the ore is characterized by hydrogeochemical radioactive features with high uranium and radon content. Through prospecting engineering of radioactive hydrogeochemical, the situation of blind ore bodies can be used to guide the layout. (authors)

Mössbauer Spectral Data of Vermiculite Ore

Data.gov (United States)

Department of the Interior — Data are provide for four samples of unexpanded vermiculite ore from mines near Enoree, South Carolina; Libby, Montana; Louisa, Virginia; Palabora, and South Africa....

The problem of the involvement of the off-balance reserves of the metallic ores into the production process

Directory of Open Access Journals (Sweden)

V. I. Golik

2017-12-01

Full Text Available The underground mining of the ore deposits by means of the intensive methods of the traditional technologies is characterized by the loss of the reserves, which are off-balance for the technologies applied. The experience, which was accumulated by the state-of-the-art enterprises before the economic reforms and the crisis indicates, that it is possible to decrease the loss of metals. This can be assumed by means of involving the off-balance reserves into the production process with the metal lixiviation during closed work. The purpose of the present-day research is the substantiation of the technical possibility and economic reasonability of the lixiviation of metals from the off-balance reserves and poorly balance ores. The correct estimation of the perspectives of those combined technology is still one of the purposes. It is a matter of fact that combining traditional technologies of the underground mining with new ones concerned with the creation of the effective lixiviation of metals from ores can be carried out with the two-stage processing. It happens when the excavation of some amount of the balance reserves creates the compensational space for crushing off-balance reserves. Involving off-balance ores into the production process solves a set of the mining production problems. For example, the fullness of mineral resources usage, the strengthening of the resource base, the reduction of load of the environment and the security of works. The involvement of the off-balance reserves into the development in the course of the revaluation of the resources and in the technological facilities of the development in the context of the growth of the scale of production reduces the production price to the competitive level. The field of application of these results is in the mining enterprises which extract solid metal-containing ores by means of the underground mining. These ores are mostly of the nonferrous, rare and precious metals, which are easily

Status Report from Canada [Processing of Low-Grade Uranium Ores

Energy Technology Data Exchange (ETDEWEB)

Thunaes, A [Eldorado Mining and Refining Ltd., Ottawa (Canada)

1967-06-15

The Canadian production of uranium increased in a spectacular manner during the period 1955-1959 from 1000 to 15 500 tons U{sub 3}O{sub 8} per year. Since 1959 the production has declined to the 1966 level of 3900 tons U{sub 3}O{sub 8} per year; stretch-out of contracts and government stockpiling programmes has made the decline gradual, and is maintaining the current rate of production until 1970. Nineteen mills were in operation during the period of peak production but only three are operating today. Ten mills were shut down and dismantled because of exhaustion of ore bodies or because the operation was uneconomical; six mills are maintained in stand-by condition. The total daily capacity of mills in operation or standing by is about 28 000 tons ore, but some of these mills would not be reopened unless an appreciable increase in uranium price occurs. The tide of uranium demand is about ready to turn and prospecting for uranium is very active this year, particularly in the Elliot Lake and Beaverlodge areas. The estimates for uranium demand in 1975-1980 are such that new ore will have to be found and developed, and new treatment plants must be built. The new ore that is found will likely be of lower grade or more expensive to mine than most of the current proven reserves in Canada and the most efficient methods of treatment will be needed to avoid excessive increases in production costs. This seems an opportune time to review Canadian milling of uranium ore, the improvements that have been made and development work towards further improvements.

Using Cut-off grade isograms to delineate ore body and calculate parameter

International Nuclear Information System (INIS)

Yu Yongfeng; Zhu Xiaobing; Deng Yonghui

2014-01-01

Taking a uranium mine for an example, using cut-off grade isograms to achieve automatic delineation of ore body and calculation of parameters are explored. With center line of catalog sampling as baseline, the number of sampling and length of sampling constructing rectangular grid and grade as elevation value, isograms of cut-off grade were drawn, thus achieving the delineation of the ore body. Then, the other parameters of the ore body can be calculated. Compared with the traditional hand drawing method, the work efficiency was greatly improved, and the material inquiry was more convenient. (authors)

Bioleaching of copper oxide ore by Pseudomonas aeruginosa

Science.gov (United States)

Shabani, M. A.; Irannajad, M.; Azadmehr, A. R.; Meshkini, M.

2013-12-01

Bioleaching is an environmentally friendly method for extraction of metal from ores. In this study, bioleaching of copper oxide ore by Pseudomonas aeruginosa was investigated. Pseudomonas aeruginosa is a heterotrophic bacterium that can produce various organic acids in an appropriate culture medium, and these acids can operate as leaching agents. The parameters, such as particle size, glucose percentage in the culture medium, bioleaching time, and solid/liquid ratio were optimized. Optimum bioleaching conditions were found as follows: particle size of 150-177 μm, glucose percentage of 6%, bioleaching time of 8 d, and solid/liquid ratio of 1:80. Under these conditions, 53% of copper was extracted.

Study of the dry processing of uranium ores

International Nuclear Information System (INIS)

Guillet, H.

1959-02-01

A description is given of direct fluorination of pre-concentrated uranium ores in order to obtain the hexafluoride. After normal sulfuric acid treatment of the ore to eliminate silica, the uranium is precipitated by a load of lime to obtain: either impure calcium uranate of medium grade, or containing around 10% of uranium. This concentrate is dried in an inert atmosphere and then treated with a current of elementary fluorine. The uranium hexafluoride formed is condensed at the outlet of the reaction vessel and may be used either for reduction to tetrafluoride and the subsequent manufacture of uranium metal or as the initial product in a diffusion plant. (author) [fr

Chlorine-assisted leaching of Key Lake uranium ore

International Nuclear Information System (INIS)

Haque, K.E.

1981-04-01

Bench-scale chlorine-assisted leach tests were conducted on the Key Lake uranium ore. Leach tests conducted at 80 0 C on a slurry containing 50% solids during 10 hours of agitation gave the maximum extraction of uranium - 96% and radium-226 - 91%. Chlorine was added at 23.0 Kg Cl 2 /tonne of ore to maintain the leach slurry pH in the range of 1.5-1.0. To obtain residue almost free of radionuclides, hydrochloric acid leaches were conducted on the first stage leach residues. The second stage leach residue still was found to contain uranium - 0.0076% and radium-226 - 200 pCi/g of solids

Natural Ores as Oxygen Carriers in Chemical Looping Combustion

Energy Technology Data Exchange (ETDEWEB)

Tian, Hanjing; Siriwardane, Ranjani; Simonyi, Thomas; Poston, James

2013-08-01

Chemical looping combustion (CLC) is a combustion technology that utilizes oxygen from oxygen carriers (OC), such as metal oxides, instead of air to combust fuels. The use of natural minerals as oxygen carriers has advantages, such as lower cost and availability. Eight materials, based on copper or iron oxides, were selected for screening tests of CLC processes using coal and methane as fuels. Thermogravimetric experiments and bench-scale fixed-bed reactor tests were conducted to investigate the oxygen transfer capacity, reaction kinetics, and stability during cyclic reduction/oxidation reaction. Most natural minerals showed lower combustion capacity than pure CuO/Fe{sub 2}O{sub 3} due to low-concentrations of active oxide species in minerals. In coal CLC, chryscolla (Cu-based), magnetite, and limonite (Fe-based) demonstrated better reaction performances than other materials. The addition of steam improved the coal CLC performance when using natural ores because of the steam gasification of coal and the subsequent reaction of gaseous fuels with active oxide species in the natural ores. In methane CLC, chryscolla, hematite, and limonite demonstrated excellent reactivity and stability in 50-cycle thermogravimetric analysis tests. Fe{sub 2}O{sub 3}-based ores possess greater oxygen utilization but require an activation period before achieving full performance in methane CLC. Particle agglomeration issues associated with the application of natural ores in CLC processes were also studied by scanning electron microscopy (SEM).

In situ carbonate leaching and recovery of uranium from ore deposits

International Nuclear Information System (INIS)

Hunkin, G.G.; Fife, T.P.; Stano, J.R.

1979-01-01

Uranium is leached from redox roll ore deposits by selective in-situ leaching with a solution of pH 7.4 to 9 (preferably 7.5 to 8.5) containing from about 0.5 to 5g/l of NH 4 HCO 3 and from about 0.1 to 3g/l of peroxide (preferably aqueous H 2 O 2 ), and sufficient NH 3 to maintain the desired pH. The leach solution is then withdrawn from the ore deposit and contacted with a strong base anion exchange material to strip the uranium from the leach solution. The uranium is eluted from the anion exchange material by an aqueous eluant, and the uranium is recovered from the eluate by first acidifying it and then treating it with ammonia to produce a precipitate of relatively pure ammonium diuranate. The content of the three components in the stripped leach solution is adjusted, and then the leach solution is recirculated through the ore deposit. After the uranium ore is removed to the extent economically practicable, the leach solution is replaced with an aqueous reducing solution which when passed into the ore deposit precipitates and renders insoluble any uranium and elements such as vanadium, molybdenum, and selenium. This process produces above ground a very low volume of impurities and waste solutions requiring disposal and does not cause material contamination of the underground deposit or any aquifer associated with the deposit

Management of wastes containing radioactivity from mining and milling uranium ores in Northern Australia

International Nuclear Information System (INIS)

Costello, J.M.

1977-01-01

The procedures and controls to achieve safe management of wastes containing radioactivity during the mining and processing of uranium ores are mainly site-specific depending on the nature, location and distribution of the ore and gangue material. Waste rock and below-ore-grade material containing low levels of radioactivity require disposal at the mine site. In open-cut mining the material is generally stockpiled above ground, with revegetation and collection of run-off water. Some material may be used to backfill open cuts. Management of these wastes requires a thorough investigation of groundwater hydrology and surface soil characteristics to control dissipation of radioactive material. Dust containing radon and radioactive particulate is produced during ore milling, and dusts of ore concentrate are generated during calcination and packaging of the yellowcake product. These dusts are managed by ventilation and filtration systems; working conditions and discharges to atmosphere will be according to the Australian Code of Practice on Radiation Protection during Mining and Milling of Uranium Ores. The chemical waste stream from leaching and processing of the uranium ores contains most of the radioactivity resulting from radium and its decay products. Neutralized effluent is discharged into holding ponds for settling solids. The paper describes the nature of wastes containing radioactivity resulting from the mining and milling of uranium, and illustrates modern engineering practices and monitoring procedures to manage the wastes, as described in the Environmental Impact Statement produced by Ranger Uranium Mines Pty Ltd (RUM) for public hearings. (author)

Geology and ore deposits of the Section 23 mine, Ambrosia Lake District, New Mexico

International Nuclear Information System (INIS)

Granger, H.C.; Santos, E.S.

1986-01-01

The Section 23 mine is one of about 18 large uranium mines opened in sandstones of the fluvial Westwater Canyon Member of the Jurassic Morrison Formation, in the Ambrosia Lake uranium district, during the early 1960s. Two distinct types of unoxidized ore occur in the mine. One type consists of uranium-rich authigenic organic matter that impregnates parts of the reduced sandstone host rocks. This type of ore occurs as peneconcordant layers which are typically elongate east-southeast, subparallel both to the sedimentary trends and to the regional strike of the host rock. A second type of ore is essentially devoid of organic matter and occurs in thick zones which conform to interfaces that separate oxidized from reduced parts of the host rocks. Genesis of the second type of ore is similar to that of roll-type deposits in Tertiary rocks of Wyoming and Texas. Organic matter in the primary ores was probably introduced into the host rock as humic acids that precipitated in the pores of the sandstone. This material is inferred first to have fixed uranium as urano-organic compounds but with further diagenesis, to have released some of the uranium to form coffinite. Vanadium, molybdenum, and selenium are associated with primary ore and may also have been fixed by the organic matter. The secondary or roll-type ores contain uranium mostly in the form of coffinite and only rarely as uraninite. They also contain vanadium and selenium but are virtually devoid of molybdenum

Application of neutron activation analysis to control P2O5 content in ore and ore concentrates of ''Apatit'' works

International Nuclear Information System (INIS)

Belyakov, M.A.; Terent'eV, Eh.P.; Frolov, V.A.

1982-01-01

A technique for a neutron activation rapid analysis of fluorine is described. A mean-square error of the analysis makes up 0,g3 per cent F. The investigation has been carried out and a close correlation has been established for the Hibine massif exploited apatite deposits on the basis of the neutron activation analysis of fluorine and chemical analysis of P 2 O 5 . Possibilities are shown of using the neutron activation analysis of P 2 O 5 in ores and certain ore con-- centrates of ''Apatit'' works from the radioactivity induced in fluorine. A mean-square error of the analysis makes up 0,35 per cent P 2 O 5

Radiotracer investigations of the flotation process in copper ore processing

International Nuclear Information System (INIS)

Petryka, L.; Przewlocki, K.

1983-01-01

Optimization of copper ore processing requires in particular the investigation of the flotation process. 64 Cu induced in natural ore by activation was used as a tracer. Detailed measurements were performed in an industrial flotation plant consisting of 14 cells. As a result the mean residence time of different grain size fractions of natural copper sulphide was determined for all parts of the flotation plant together with the efficiency of the flotation process. (author)

Extraction of lithium Carbonate from Petalite Ore (Momeik District, Myanmar)

International Nuclear Information System (INIS)

Tun Tun Moe

2011-12-01

The methods for preparing high purity lithium carbonate which can be used for pharmaceutical applications, electronic grade crystals of lithium or to prepare battery-grade lithium metal are disclosed. Lithium carbonate as commercially produced from mineral extraction, lithium containing brines or sea water. One method for the production of pure lithium carbonate from mineral source (petalite ore) obtained from Momeik District, Myanmar is disclosed. Method for mineral processing of ore concentrate is also disclosed.

Study on designing a complete pilot plant for processing sandstone ores in Palua-Parong area

International Nuclear Information System (INIS)

Le Quang Thai; Tran Van Son; Tran The Dinh; Trinh Nguyen Quynh; Vu Khac Tuan

2015-01-01

Design work is the first step of the construction and operation of pilot plant. Thus, the project Study on designing a complete pilot plant for processing sandstone ores in Palua - Parong area was conducted to design a pilot plant for testing entire technological process to obtain yellowcake. Based on a literature review of uranium ore processing technology in the world, information of ore and previous research results of uranium ore in PaLua - PaRong area at the Institute for Technology of Radioactive and Rare Elements, a suitable technological flowsheet for processing this ore has been selected. The size, location of the pilot plant and planed experiments has been selected during the implementation of this project, in which basic parameters, designed system of equipment, buildings, ect. were also calculated. (author)

Utilisation of iron ore tailings as aggregates in concrete

OpenAIRE

Francis Atta Kuranchie; Sanjay Kumar Shukla; Daryoush Habibi; Alireza Mohyeddin

2015-01-01

Sustainable handling of iron ore tailings is of prime concern to all stakeholders who are into iron ore mining. This study seeks to add value to the tailings by utilising them as a replacement for aggregates in concrete. A concrete mix of grade 40 MPa was prepared in the laboratory with water–cement ratio of 0.5. The concrete were cured for 1, 2, 3, 7, 14 and 28 days. The properties of the concrete such as workability, durability, density, compressive strength and indirect tensile strength we...

Study of a bacterial leaching program for uranium ores by Thiobacillus ferroxidans

International Nuclear Information System (INIS)

Garcia Junior, O.

1989-01-01

The development of a bacterial leaching program for uranium ores is studied. Three basic points are presented: isolation and purification of Thiobacillus ferroxidans, as well Thiobacillus thio oxidans; physiological studies of growth and respiratory metabolism of T. ferroxidans; uranium leaching from two types of ore by T. ferroxidans action, on laboratory, semi pilot and pilot scales. The bacterial leaching studies were carried out in shake flasks, percolation columns (laboratory and semi pilot) and in heap leaching (pilot). The potential of the ores studied in relation to bacterial action, was first showed in shake flask experiments. The production of H 2 S O 4 and Fe 3+ was a result of the bacterial activity on both ore samples containing pyrite (Fe S 2 ). These two bacterial products resulted in a high uranium and molybdenum extraction and a lower sulfuric acid consumption compared to the sterilized treatments. Similar results were obtained in percolation column at the same scale (lab). (author)

The impact of bacteria of circulating water on apatite-nepheline ore flotation.

Science.gov (United States)

Evdokimova, G A; Gershenkop, A Sh; Fokina, N V

2012-01-01

A new phenomenon has been identified and studied-the impact of bacteria on the benefication process of non-sulphide ores using circulating water supply-a case study of apatite-nepheline ore. It is shown that bacteria deteriorate the floatability of apatite due to their interaction with active centres of calcium-containing minerals and intense flocculation, resulting in a decrease of the flotation process selectivity thus deteriorating the quality of concentrate. Based on the comparative analysis of primary sequences of 16S rRNA genes, there have been identified dominating bacteria species, recovered from the circulating water used at apatite-nepheline concentrating mills, and their phylogenetic position has been determined. All the bacteria were related to γ-Proteobacteria, including the Acinetobacter species, Pseudomonas alcaliphila, Ps. plecoglossicida, Stenotrophomonas rhizophila. A method of non-sulphide ores flotation has been developed with consideration of the bacterial factor. It consists in use of small concentrations of sodium hypochlorite, which inhibits the development of bacteria in the flotation of apatite-nepheline ores.

The potentialities of nuclear geophysical methods in ore testing of ferrous metals

International Nuclear Information System (INIS)

Ochkur, A.P.; Voznesenskij, L.I.; Fedorov, S.V.

1976-01-01

To study iron ores of simple composition, the gamma-gamma method is used successfully, determining iron contents in boreholes, in the walls of mine workings and in sampling hacked off rocks. The X-ray diffraction method is used effectively in analysing iron ores of complex composition ensuring that the contents of Fe, Mn and Ca are determined in them. Neutron-capture spectrometric gamma-logging is a promising method for determining the total iron content in the mined ore. Manganese ores are singled out in the boreholes by data from thermal neutron and neutron-activation logging. The X-ray diffraction method is used to analyse powder samples in mine workings. To single out and estimate chromites in boreholes, a combination of neutron-capture spectrometric gamma-logging, gamma-gamma logging and epithermal neutron-neutron logging is used. The X-ray diffraction method determines the contents of Cr, Ca and Fe in powder and coarse-ground samples of chromites

Composition suitable as collection agent in ore flotation process and preparation of said composition

International Nuclear Information System (INIS)

Bresson, C.R.; Parlman, R.M.

1984-01-01

A composition and process are provided for the recovery of the values of zinc, molybdenum, copper, lead, ion (pyrite), and iron-containing small amounts of gold or uranium, or both, from ores comprising these mineral sulfides. The aqueous composition is the impure form of an alkali metal alkyl trithiocarbonate compound. The process comprises employing said aqueous composition as a collection agent for the above minerals in an ore recovery process. A process for the separation of zinc values from lead values from an ore comprising both is provided by employing an alkali metal alkyl trithiocarbonate compound as a collection agent for zinc. In addition, both a composition and process are provided for the recovery of the values of iron, copper, and lead from ores comprising these values. The composition consists essentially of a dispersant and an impure form of an alkali metal alkyl trithiocarbonate compound. The process comprises employing this composition as a collection agent for the above minerals in an ore recovery process

Cationic flotation of some lithium ores

International Nuclear Information System (INIS)

Valadao, G.E.S.; Peres, A.E.C.; Silva, H.C. da

1984-01-01

The cationic flotation of some lithium ores (spodumene, amblygonite, petalite, lepidolite) is studied by the measure of zeta potential and micro-flotation tests in Hallimond tube. The effect of some modifier agents (corn starch, meta sodium silicate) on the lithium flotation is studied. (M.A.C.) [pt

Barite-polymetallic mineralization of Zmeinogorsk ore district and some genetic aspects of its formation

Science.gov (United States)

Bestemianova, K. V.; Grinev, O. M.

2017-12-01

Zmeinogorsky ore district is located in the northwest part of Ore Altai megatrough, which has long-lasting history of its development and complicated geological structure. Within the ore district, which is the northwest part of the devonian Zmeinogorsk-Bystrushinsky trough, ore mineralization is associated with the system of northwest border faults and cross branch faults. There were four main stages and five phases of minerogenesis. The first stage is the stage of oregenesis beginning and quartz-chlorite-sericite wall-rock alteration rocks formation. Ore deposition and intense tectonics took place during the second stage. The third stage is the most longstanding and productive ore formation stage. There are five distinct minerogenesis phases within this stage. The fourth stage expressed in erosion development and supergene alteration of already formed ore bodies with oxidation zone formation. Main ore minerals are pyrite, chalcopyrite, sphalerite and galena. Minor minerals are tetrahedrite, bornite, tennantite and chalcocite. Precious metals minerals are acanthite, gold, electrum, gold and silver amalgams. Barren minerals are barite, quartz, calcite, gypsum. According to obtained data average isotopic composition of third stage sulphides is: pyrite -0,2‰, chalcopyrite 0‰, galena +0,5‰, sphalerite -1,2‰ for the first complex; chalcopyrite -1,9‰, galena -3,4‰, sphalerite -2,3‰, tetrahedrite -3,7‰ for the second complex; tennantite -12,8‰, bornite -8,9‰ for the third complex. Sulfur isotopic compoisiton variations indicate source inhomogeneity. Thus, there was dominant source change from mantle one in the beginning to crustal one in the end. Main oregenesis stages took place in the range of temperatures between 170 and 210°С and in the mineral-forming solutions salinity range between 3 and 10 wt % NaCl equiv.

Composition and origin of Early Cambrian Tiantaishan phosphorite-Mn carbonate ores, Shaanxi Province, China

Science.gov (United States)

Hein, J.R.; Fan, D.; Ye, J.; Liu, T.; Yeh, H.-W.

1999-01-01

The Tiantaishan phosphorite-Mn carbonate ores occur in the Early Cambrian Tananpo Formation in complexly folded and faulted rocks located in southern Shaanxi Province. About 65 x 106 tonnes of 17% P2O5 ore reserves exist and Mn-ore reserves are about 8.3 x 106 tonnes of +18% Mn. The stratigraphic sequence in ascending order consists of black phyllite, black to gray phosphorite ore, black phyllite, rhodochrostone ore, Mn mixed-carbonates, and dolostone. Data are presented from microprobe mineral chemistry, whole-rock chemistry, stable isotopes of carbonates, X-ray mineralogy, petrographic and SEM observations, and statistical analysis of chemical data. The dominant ore-forming minerals are hydroxy- and carbonate fluorapatite and Ca rhodochrosite, with Mg kutnahorite and dolomite comprising the Mn mixed-carbonate section. Pyrite occurs in all rock types and alabandite (MnS) occurs throughout the rhodochrostone section. The mean P2O5 content of phosphorite is 31% and argillaceous phosphorite is 16%, while the mean MnO content of rhodochrostone ore is 37%. Phosphorite ores are massive, spheroidal, laminated, and banded, while rhodochrostone ores have oolitic, spheroidal, and granular fabrics. The most distinguishing characteristics of the ores are high total organic carbon (TOC) contents (mean 8.4%) in the phosphorite and high P2O5 contents (mean 2.7%) in the rhodochrostone ore. The atypically high TOC contents in the Tiantaishan phosphorite probably result from very strong productivity leading to high sedimentation rates accompanied by weak reworking of sediments; poor utilization of the organic matter by bacteria; and/or partial replacement of bacterial or algal mats by the apatite. The depositional setting of the ores was the margin of an epicontinental seaway created as a direct consequence of global processes that included break-up of a supercontinent, formation of narrow seaways, creation of extensive continental shelves, overturn of stagnant, metal-rich deep

Status report from India [Processing of Low-Grade Uranium Ores

Energy Technology Data Exchange (ETDEWEB)

Fareeduddin, S [Atomic Energy Establishment, Trombay, Bombay (India)

1967-06-15

The Energy Survey Committee of India, in its report to the Government, has estimated that the energy requirements in the year 1985/86 would be 290X10{sup 9} kWh, i. e. eight times the present requirement, and in the year 2000 it would be 820X10{sup 9} kWh, which is about 22 times the present requirement. The hydropotential that can be developed during the next 20 years is estimated to be of the order of 150X10{sup 9} kWh and hence the difference of about 140X10{sup 9} kWh will have to be obtained from either fossil or nuclear fuel. This would mean installating a generation capacity of about 26 000 MW in the next 20 years. To conserve the limited fossil fuel reserves, it has been estimated that about 70% of this capacity, i. e. about 18 000 MW, should form the nuclear component. This will be about 25% of the total energy requirements by 1985/86. The uranium requirements to meet this growth will be about 10 000 tonnes by 1985/86 which, from the point of view of our resources, is a substantial quantity. The most important uranium deposits are located in South Bihar in the Singhbhum Thrust belt, which is well known for its copper, apatite magnetite and kyanite deposits. On the basis of their uranium contents, these ores can be classified into two broad categories - one with low copper and high uranium contents and the other with high copper and low uranium contents. Another source of uranium in India is monazite. Some particulars about these deposits are given. Facilities for the recovery of byproduct uranium from monazite already exist in the country. But its production from this source, conditioned as it is by the limited demand for thorium, cannot be very large. Both the categories of the ores from the Singhbhum belt can be considered as low grade. Uranium from the ores in category (B) can be recovered, in the present state of knowledge, only as a byproduct of the copper industry. In the case of ores in the category (A), attempts have been made to recover uranium

RL-1: a certified uranium reference ore

International Nuclear Information System (INIS)

Steger, H.F.; Bowman, W.S.

1985-06-01

A 145-kg sample of a uranium ore from Rabbit Lake, Saskatchewan, has been prepared as a compositional reference material. RL-1 was ground to minus 74 μm and mixed in one lot. Approximately one half of this ore was bottled in 100-g units, the remainder being stored in bulk. The homogeneity of RL-1 with respect to uranium and nickel was confirmed by neutron activation and X-ray fluorescence analytical techniques. In a 'free choice' analytical program, 13 laboratories contributed results for one or more of uranium, nickel and arsenic in one bottle of RL-1. Based on a statistical analysis of the data, the following recommended values were assigned: U, 0.201%; Ni, 185 μg/g; and As, 19.6 μg/g

Dynamics of uranium ore formation in the basement and frame of the Streltsovskaya Caldera

International Nuclear Information System (INIS)

Petrov, V.; Schukin, S.

2014-01-01

The analysis of geological-geophysical, paleo-geodynamics, mineralogical, geochemical, isotope, geochronological, and thermo-baro-geochemical data allow us to offer a model of uranium ore formation dynamics in the basement and frame of the Streltsovskaya Caldera connected to activity of the fluid-conducting fault zones network with the aim to identify prospective areas The most ancient fluid-conducting structures are inter-block NE-SW, NNE-submeridional, NW-SE and, probably, WNW-sub-latitudinal faults. The oldest NE-SW faults and schistosity zones were formed during Proterozoic tectonic cycle (TC) with reactivation in T3-J2 time due to global reorganization of stress field and reactivation of tectonic movements. The NNE-submeridional and NW-SE faults were extended with increased fluid permeability during Caledonian and Variscan TCs. They also were reactivated in the process of Late Mesozoic tectonic and magmatic activation (TMA). Thus already at early stages of geotectonic evolution within the intersection of NE-SW (N-Urulyunguyevskiy fault) and NNE-submeridional (Chindachinskaya zone) faults the areas of increased fluid and magmatic activity were formed. The dynamics of fault formation in the basement and frame of the Streltsovskaya caldera and its volcano-sedimentary cover differs. In the basement and granite framework NE-SW, NNEsubmeridional and NW-SE faults are interblock structures of the I rank. Their intersection formed areas of long-term circulation of hydrothermal solutions and telescopic appearance of multi-age metasomatites that created conditions for localizing of vein-stockwork mineralization. In volcanosedimentary cover the NE-SW and NNE-submeridional faults should be considered as interblock structures of the I rank where intersections provided inflow of ore-bearing solutions and their redistribution within the cover. Here the main ore distributing role belongs to NW-SE shears. They are intrablock II rank structures which were formed due to dextral

Beyond the obvious limits of ore deposits: The use of mineralogical, geochemical, and biological features for the remote detection of mineralization

Science.gov (United States)

Kelley, D.L.; Kelley, K.D.; Coker, W.B.; Caughlin, B.; Doherty, M.E.

2006-01-01

Far field features of ore deposits include mineralogical, geochemical, or biological attributes that can be recognized beyond the obvious limits of the deposits. They can be primary, if formed in association with mineralization or alteration processes, or secondary, if formed from the interaction of ore deposits with the hydrosphere and biosphere. This paper examines a variety of far field features of different ore deposit types and considers novel applications to exploration and discovery. Primary far field features include mineral and rock chemistry, isotopic or element halos, fluid pathways and thermal anomalies in host-rock sequences. Examples include the use of apatite chemistry to distinguish intrusive rocks permissive for iron oxide copper gold (IOCG) and porphyry deposits; resistate mineral (e.g., rutile, tourmaline) chemistry in exploration for volcanogenic massive sulfide (VMS), orogenic gold, and porphyry deposits; and pyrite chemistry to vector toward sedimentary exhalative (sedex) deposits. Distinctive whole-rock geochemical signatures also can be recognized as a far field feature of porphyry deposits. For example, unique Sr/Y ratios in whole-rock samples, used to distinguish barren versus fertile magmas for Cu mineralization, result from the differentiation of oxidized hydrous melts. Anomalous concentrations of halogen elements (Cl, Br, and I) have been found for distances of up to 200 m away from some mineralized centers. Variations in isotopic composition between ore-bearing and barren intrusions and/or systematic vertical and lateral zonation in sulfur, carbon, or oxygen isotope values have been documented for some deposit types. Owing to the thermal aureole that extends beyond the area of mineralization for some deposits, detection of paleothermal effects through methods such as conodont alteration indices, vitrinite or bitumen reflectance, illite crystallinity, and apatite or zircon thermochronology studies also can be valuable, particularly for

Sensibility test for uranium ores from Qianjiadian sandstone type uranium deposit

International Nuclear Information System (INIS)

Zhang Mingyu

2005-01-01

Sensibility tests for uranium ores from Qianjiadian sandstone type uranium deposit in Songliao Basin which is suitable to in-situ leach are carried out, including water sensibility, velocity sensibility, salt sensibility, acid sensibility and alkaline sensibility. The sensibility critical value of this ore is determined. Some references on mining process and technical parameter are provided for in-situ leaching of uranium. (authors)

Helium/solid powder O-ring leakage correlation experiments using a radiotracer

International Nuclear Information System (INIS)

Bild, R.W.; Leisher, W.B.; Weissman, S.H.; Seya, M.

1984-01-01

UO 2 definitely leaked past the O-ring in three of the tests confirming the major results of the previous work. Continuous leakage at these levels may require additional precautions under present regulatory policies. The mechanism and the time and particle size dependence for the leakage are not known, but there is some indication leakage is more likely at low temperatures. It is possible leakage is due to movement of the O-ring during temperature or pressure cycling at the beginning or end of a test. The radiotracer method involves less labor and is much less susceptible to contamination than the previous method. Future work will investigate leakage past lubricated O-rings and time dependence of leakage. 1 reference, 1 table

Fractionation of Cu and Mo isotopes caused by vapor-liquid partitioning, evidence from the Dahutang W-Cu-Mo ore field

Science.gov (United States)

Yao, Junming; Mathur, Ryan; Sun, Weidong; Song, Weile; Chen, Huayong; Mutti, Laurence; Xiang, Xinkui; Luo, Xiaohong

2016-05-01

The study presents δ65Cu and δ97Mo isotope values from cogenetic chalcopyrite and molybdenite found in veins and breccias of the Dahutang W-Cu-Mo ore field in China. The samples span a 3-4 km range. Both isotopes show a significant degree of fractionation. Cu isotope values in the chalcopyrite range from -0.31‰ to +1.48‰, and Mo isotope values in the molybdenite range from -0.03‰ to +1.06‰. For the cogenetic sulfide veined samples, a negative slope relationship exists between δ65Cu and δ97Mo values, which suggest a similar fluid history. Rayleigh distillation models the vein samples' change in isotope values. The breccia samples do not fall on the trend, thus indicating a different source mineralization event. Measured fluid inclusion and δD and δ18O data from cogenetic quartz indicate changes in temperature, and mixing of fluids do not appear to cause the isotopic shifts measure. Related equilibrium processes associated with the partitioning of metal between the vapor-fluid in the hydrothermal system could be the probable cause for the relationship seen between the two isotope systems.

Application of Remote-Sensing Observations for Detecting Patterns of Localization of Cu-Ni Mineralization of the Norilsk Ore Region

Science.gov (United States)

Milovsky, G. A.; Ishmukhametova, V. T.; Shemyakina, E. M.

2017-12-01

The methods of a complex analysis of materials of space, gravimetric, and magnetometric surveys were developed on the basis of a study of reference fields of the Norilsk ore region (Imangda, etc.) for detection patterns of the localization of Cu-Ni (with PGMs) mineralization in intrusive complexes of the northwestern frame of the Siberian Platform.

Species of organic matter and their role in the formation of statiform uranium ores

International Nuclear Information System (INIS)

Goleva, P.K.; Uspenskij, V.A.

1983-01-01

Results of investigation of organic mather (OM) from stratiform uranium ore manifestation in sedimentary Upper Proterozoic rocks of large trough with caledonian folded base are given. Role of OM in concentration of uranium-ore formations of two ore-bearing horizons, presented by rocks of facies of large lakes (''lacustrine'') and continental deltas (''alluvial'') was clarified. Characteristics of OM of rocks of ''lacustrine'' and ''alliivial'' facies, OM types, chemical composition of OM of ''alluvial'' horizon rocks, om spectrograms and diffractograms are presented. It was established that OM of ''lacustrine'' and ''alluvial'' ore-bearing horizons are presented by different morphological and genetic types, which played different roles in t.he process of uranium ore-formation. Faneiy dispersed OM, related to the category of oxidized lower kerites is present in ''lacustrine'' horizon. Ore uranium-arsenide nuneral association substitutes OM of early generation. The latest OM generation is related to epigenetic thread veinlet of dolomite and barite. In ''alluvial'' horizon OM is present in the form of carbonized vegetative residues+ ciosely assocaating with sulfides of different metals, and is presented by high-moiecular carbocyctnc hydroxy compouds. Uranium of carbonized vegetative residues is in finely dispersed state; the form of its fixation was not established. It is proposed that the major part of uranium was sorbed by OM during sedimentogenesis

GOLD-BEARING MINERALIZED ZONES OF THE YUZHNOE ORE OCCURRENCE AND ITS COMPARISON WITH LODE GOLD DEPOSITS OF YENISEI RIDGE

OpenAIRE

MANSUROV R.KH.

2016-01-01

The relevance of the discussed issue is caused by the need to detect a new gold ore deposits within the Yenisei ridge to replenish the mineral resources of gold ore in Russia. The main aim of the study is to explore the features of geological structure and gold ore mineralized zones of ore occurrence Yuzhnoe in order to forecast gold ore bodies, and to substantiate the continuation of geological exploration. The prospecting is realized by the express method of prospecting of gold ore deposits...

Uranium ores of Kazakhstan as the most technologic source of a fissionable material

International Nuclear Information System (INIS)

Berikbolov, B.R.

1999-01-01

Kazakhstan as is known has unique deposits of uranium. Its resources composed a third part of the world resources. The most important part of resources having a practical value, is related with depression in southern regions of the Republic. By now more than 15 deposits are discovered and partially explored. These deposits from three uranium provinces - Shu-Sarysu, Syr-Darya and Ili. The ores occur in friable water-bearing sandy horizons of Cretaceous and Paleogene age between waterproof agrillaceous sediments at depth from 100 up to 600 m. Ore bodies thickness changes from 5 to 10 m at uranian average-grade 0.03-0.1 %. Width of band shaped ore bodies changes from tens meters to the one kilometers and extent changes from one kilometer up to many tens kilometers. The important feature of deposits is their suitability for development by progressive in situ leaching (ISL) method. It was demonstrated, that uranium ores are comprehensive and, that is important, a lot of commercially important elements, containing in ores, gives in to extraction at development by the ISL method. The preliminary calculation of expenditures for the extraction of useful byproducts from ordinary sulphate solution have demonstrated rather high profitableness for rhenium, scandium, selenium, rare earth even at the very low contents in solution. It was pointed out, that whole technological chain applied now at industrial scale is oriented to mono-metallic uranium ores, therefore present technology of leaching and recovery of industrial solution does not allow ti extract all valuable components containing in ores. The development of new improved technological chain. beginning with a composition of leaching out reagent and up to applying of miscellaneous sorbing materials, can create new mineral-raw base of rare and dissipated elements and to lower considerably the price of uranium mining from sandstone deposits

Test operation of the uranium ore processing pilot plant and uranium conversion plant

International Nuclear Information System (INIS)

Suh, I.S.; Lee, K.I.; Whang, S.T.; Kang, Y.H.; Lee, C.W.; Chu, J.O.; Lee, I.H.; Park, S.C.

1983-01-01

For the guarantee of acid leaching process of the Uranium Ore Processing Pilot Plnat, the KAERI team performed the test operation in coorperation with the COGEMA engineers. The result of the operation was successful achieving the uranium leaching efficiency of 95%. Completing the guarentee test, a continuous test operation was shifted to reconform the reproducibility of the result and check the functions of every units of the pilot plant feeding the low-grade domestic ore, the consistency of the facility was conformed that the uranium can easily be dissolved out form the ore between the temperature range of 60degC-70degC for two hours of leaching with sulfuric acid and could be obtained the leaching efficiency of 92% to 95%. The uranium recovery efficiencies for the processes of extraction and stripping were reached to 99% and 99.6% respectively. As an alternative process for the separation of solid from the ore pulp, four of the Counter Current Decanters were shifted replacing the Belt Filter and those were connected in a series, which were not been tested during the guarantee operation. It was found out that the washing efficiencies of the ore pulp in each tests for the decanters were proportionally increased according to the quantities of the washing water. As a result of the test, it was obtained that washing efficiencies were 95%, 85%, 83% for the water to ore ratio of 3:1, 2:1, 1.5:1 respectively. (Author)

A finite difference model of the iron ore sinter process

OpenAIRE

Muller, J.; de Vries, T.L.; Dippenaar, B.A.; Vreugdenburg, J.C.

2015-01-01

Iron ore fines are agglomerated to produce sinter, which is an important feed material for blast furnaces worldwide. A model of the iron ore sintering process has been developed with the objective of being representative of the sinter pot test, the standard laboratory process in which the behaviour of specific sinter feed mixtures is evaluated. The model aims to predict sinter quality, including chemical quality and physical strength, as well as key sinter process performance parameters such ...

Preliminary study of flotation behavior of Besham Lead-Zinc ore

International Nuclear Information System (INIS)

Khan, M.M.; Din, F.; Rafiq, M.

2001-01-01

This preliminary study examines the flotation behavior of the mineral galena from Besham Lead-Zinc ore samples with reference to the particle size, collector types such as Ethyl and Propyl xanthates and depressants. The comminution of the as mined ore was carried out in the laboratory jaw crusher and disc mill as well as in a laboratory ball mill. The material having size range between-90 microns and +63 microns was selected for flotation studies. (author)

Beneficiation of the gold bearing ore by gravity and flotation

Science.gov (United States)

Gül, Alim; Kangal, Olgaç; Sirkeci, Ayhan A.; Önal, Güven

2012-02-01

Gold concentration usually consists of gravity separation, flotation, cyanidation, or the combination of these processes. The choice among these processes depends on the mineralogical characterization and gold content of the ore. Recently, the recovery of gold using gravity methods has gained attention because of low cost and environmentally friendly operations. In this study, gold pre-concentrates were produced by the stepwise gravity separation and flotation techniques. The Knelson concentrator and conventional flotation were employed for the recovery of gold. Gold bearing ore samples were taken from Gümüşhane Region, northern east part of Turkey. As a result of stepwise Knelson concentration experiments, a gold concentrate assaying around 620 g/t is produced with 41.4wt% recovery. On the other hand, a gold concentrate about 82 g/t is obtained with 89.9wt% recovery from a gold ore assaying 6 g/t Au by direct flotation.

Long-Term Leak Tightness Of O-Ring Seals In The 9975 Shipping Package

International Nuclear Information System (INIS)

Hoffman, E.; Skidmore, E.; Daugherty, W.

2010-01-01

O-ring seals in the 9975 shipping package containment vessels are fabricated from a Viton GLT or GLT-S compound. Long-term testing of these O-rings has been performed to support service life predictions for packages used for long-term storage. Since the only criterion for O-ring performance is to maintain a leak-tight seal, leak testing is the primary indicator of service life. Fixtures have been aging at elevated temperatures to provide data for service life predictions. Limited leak test failures have been observed at the higher temperatures. This provides the opportunity for comparison to trends based on other O-ring properties, such as compression stress relaxation. Initial data suggest that the CSR data have some predictive value for a leak-tight service life, but other factors can complicate efforts to draw definitive conclusions.

Uranium Processing Research in Australia [Processing of Low-Grade Uranium Ores

Energy Technology Data Exchange (ETDEWEB)

Stewart, J R [Australian Atomic Energy Commission, Coogee, N.S.W. (Australia)

1967-06-15

Uranium processing research in Australia has included studies of flotation, magnetic separation, gravity separation, heavy medium separation, atmospheric leaching, multi-stage leaching, alkali leaching, solar heating of leach pulps, jigged-bed resin-in-pulp and solvent-in-pulp extraction. Brief details of the results obtained are given. In general, it can be said that gravity, magnetic and flotation methods are of limited usefulness in the treatment of Australian uranium ores. Alkali leaching seldom gives satisfactory recoveries and multi-stage leaching is expensive. Jigged-bed resin-in-pulp and packed tower solvent-in-pulp extraction systems both show promise, but plant-scale development work is required. Bacterial leaching may be useful in the case of certain low-grade ores. The main difficulties to be overcome, either singly or in combination, in the case of Australian uranium ores not currently considered economically exploitable, are the extremely finely divided state of the uranium mineral, the refractory nature of the uranium mineral and adverse effects due to the gangue minerals present. With respect to known low-grade ores, it would be possible in only a few cases to achieve satisfactory recovery of uranium at reasonable cost by standard treatment methods. (author)

The role of post-ore processes in the alteration of infiltrational uranium deposits

International Nuclear Information System (INIS)

Kondrat'eva, I.A.; Bobrova, L.L.; Nesterova, M.V.

1992-01-01

Ore-bearing rocks and ores of uranium deposits that are associated with gray alluvial deposits and formed through oxidation of sedimentary beds at the end of the Jurassic, have undergone intensive alterations. The impact of hot carbonic acid solutions on infiltrational uranium deposits, along with calcite and hematite, resulted in partial dissolution of and redeposition of uranium. Uranium concentrates with newly formed Fe-bisulfides and hydroxides in the reducing stage of epigenetic alterations within a hydrochemical sulfide-gley medium, leading to changes in ore morphology. 20 refs., 7 figs., 3 tabs

Gamma ray fluorescence for in situ evaluation of ore in Witwatersrand gold mines

International Nuclear Information System (INIS)

Rolle, R.

1979-01-01

A system for quantitative in situ evaluation of ore in Witwatersrand gold mines was researched and subsequently developed. The principle of measurement is based on the excitation of gold K X-rays in rock face samples by the 88 keV gamma radiation from a Cadmium-109 radioisotope source. The X-rays and scattered radiation from the rock matrix are detected by a hyperpure germanium detector cooled by liquid nitrogen in a portable probe. In the fluorescence spectrum the intensity ratio of the gold Kβ peaks to their immediate scattered background is evaluated and quantitatively converted in the portable analyser to area concentration units. All aspects of the physical and instrumental measurement had to be investigated to arrive at a system capable of quantitative evaluation of trace concentrations in stope face ore samples. The parameters of spectrum evaluation were investigated from fundamental principles to allow quantitative assessment of different methods of peak evaluation for optimization of the method as a whole. The basic concepts of random signal processing times were developed together with new concepts of pileup parameters to allow a quantitative description of the data acquisition rate of a complete analog pulse processing system. With this foundation a practical measuring geometry and optimum values for signal processing time parameters, for detector size and for discriminator positions for spectrum evaluation could be determined. Parallel with the derivation of optimum measurement parameters went the development of instruments, their field testing and appraisal of the method. The development of the gamma ray fluorescence method has shown the potential of the method to serve as an ore valuation tool and to assist in the geological identification of strata in Witwatersrand gold mines

Treatment of waste water from uranium ore preparation

International Nuclear Information System (INIS)

Klicka, V.; Mitas, J.; Vacek, J.

1976-01-01

An improved closed-loop process is described for treating waste water resulting from chemical extraction of uranium from ore. The water is evaporated to form a concentrated solution and is then subjected to crystallization of the least soluble salt component thereof via further evaporation, or cooling or simultaneous cooling and a partial vacuum. The crystallized component is then separated from the mother liquor, whereupon the latter is fed back after removal of residual uranium therefrom to the extraction installation to replace the acids used therein. Additionally, the pure condensate produced during evaporation of the waste waters is employed as a replacement for the fresh water employed in processing of the ore. 6 claims, 2 figures

Geology and ore deposits of Johnny M mine, Ambrosia Lake District

International Nuclear Information System (INIS)

Falkowski, S.K.

1980-01-01

The Johnny M mine is one of very few mines in the Ambrosia Lake district with uranium ore in two members of the Morrison Formation (Jurassic); these members are the Westwater Canyon Sandstone and the Brushy Basin Shale. The Westwater Canyon ore is contained in the two upper sandstone units of the member, and the Brushy Basin ore is contained in the Poison Canyon sandstone (informal usage). The sedimentary features and structures in the Westwater Canyon sandstones indicate that the sediments were deposited by a system of aggrading braided streams, possibly at the distal end of coalescing alluvial fans. The Poison Canyon sandstone was probably the result of deposition in a complex environment of meandering and braided streams. Paleocurrent-direction indicators, such as fossilized-log orientation, foreset azimuths, and the axes of crossbeds and channel scours, suggest that the local palostream flow was to the east and southeast. The uranium mineralization is closely associated with 1) local accumulations of carbonaceous (humate) matter derived from the decay of organic material and 2) paleostream channels preserved in the rocks. The ore elements were derived from the leaching of volcanic air-fall tuffs and ash, which were introduced into the fluvial system during volcanic activity in the western United States. The mobile ore-element ions were reduce and concentrated by humic acids and bacteria present in the fluvial system and ultimately remobilized into the forms present today. The uranium is thus envisioned as forming either essentially on the surface as the sediments were being deposited or at very shallow depth

Complex mineralization at large ore deposits in the Russian Far East

Science.gov (United States)

Schneider, A. A.; Malyshev, Yu. F.; Goroshko, M. V.; Romanovsky, N. P.

2011-04-01

Genetic and mineralogical features of large deposits with complex Sn, W, and Mo mineralization in the Sikhote-Alin and Amur-Khingan metallogenic provinces are considered, as well as those of raremetal, rare earth, and uranium deposits in the Aldan-Stanovoi province. The spatiotemporal, geological, and mineralogical attributes of large deposits are set forth, and their geodynamic settings are determined. These attributes are exemplified in the large Tigriny Sn-W greisen-type deposit. The variation of regional tectonic settings and their spatial superposition are the main factor controlling formation of large deposits. Such a variation gives rise to multiple reactivation of the ore-magmatic system and long-term, multistage formation of deposits. Pulsatory mineralogical zoning with telescoped mineral assemblages related to different stages results in the formation of complex ores. The highest-grade zones of mass discharge of hydrothermal solutions are formed at the deposits. The promising greisen-type mineralization with complex Sn-W-Mo ore is suggested to be an additional source of tungsten and molybdenum. The Tigriny, Pravourminsky, and Arsen'evsky deposits, as well as deposits of the Komsomol'sk and Khingan-Olonoi ore districts are examples. Large and superlarge U, Ta, Nb, Be, and REE deposits are localized in the southeastern Aldan-Stanovoi Shield. The Ulkan and Arbarastakh ore districts attract special attention. The confirmed prospects of new large deposits with Sn, W, Mo, Ta, Nb, Be, REE, and U mineralization in the south of the Russian Far East assure expediency of further geological exploration in this territory.

POTENTIALLY UNSTABLE SLOPE ABOVE ORE PROCESSING PLANT IN THE "OČURA" DOLOMITE QUARRY (LEPOGLAVA, NORTH CROATIA

Directory of Open Access Journals (Sweden)

Karlo Braun

1993-12-01

Full Text Available The complex engineering investigation, in the nearest surroun-dig of the conditionally stable high slope, close to ore processing facilities in the dolomite quarry »Očura« near Lepoglava (North Croatia, was carried out. Studying the tectonic features of the rock mass, discontinuities referent to the slope stability, was found out. Rock fragment size was measured and data processed using statistical design. According to rock fragment mean values, velocity of the longitudinal seismic waves was predicted. This values was compared with velocities of the longitudinal seismic waves, determined using gcophisical refraction seismic method. Physical and mechanical properties of the dolomite rock mass, considering longitudinal and transversal seismic wave velocities, and »RMR«-classification was assesed. All the results indicate, that the slope above the ore processing facilities should be consider as conditionally stable, with real probability to get unstable under the vibrations caused by blasting, during the exploitation in the field, close behind the investigated slope (the paper is published in Croatian.

A new ore reserve estimation method, Yang Chizhong filtering and inferential measurement method, and its application

International Nuclear Information System (INIS)

Wu Jingqin.

1989-01-01

Yang Chizhong filtering and inferential measurement method is a new method used for variable statistics of ore deposits. In order to apply this theory to estimate the uranium ore reserves under the circumstances of regular or irregular prospecting grids, small ore bodies, less sampling points, and complex occurrence, the author has used this method to estimate the ore reserves in five ore bodies of two deposits and achieved satisfactory results. It is demonstrated that compared with the traditional block measurement method, this method is simple and clear in formula, convenient in application, rapid in calculation, accurate in results, less expensive, and high economic benefits. The procedure and experience in the application of this method and the preliminary evaluation of its results are mainly described

A REAL-TIME COAL CONTENT/ORE GRADE (C2OC) SENSOR

Energy Technology Data Exchange (ETDEWEB)

Rand Swanson

2005-04-01

This is the final report of a three year DOE funded project titled ''A real-time coal content/ore grade (C{sub 2}OG) sensor''. The sensor, which is based on hyperspectral imaging technology, was designed to give a machine vision assay of ore or coal. Sensors were designed and built at Resonon, Inc., and then deployed at the Stillwater Mining Company core room in southcentral Montana for analyzing platinum/palladium ore and at the Montana Tech Spectroscopy Lab for analyzing coal and other materials. The Stillwater sensor imaged 91' of core and analyzed this data for surface sulfides which are considered to be pathfinder minerals for platinum/palladium at this mine. Our results indicate that the sensor could deliver a relative ore grade provided tool markings and iron oxidation were kept to a minimum. Coal, talc, and titanium sponge samples were also imaged and analyzed for content and grade with promising results. This research has led directly to a DOE SBIR Phase II award for Resonon to develop a down-hole imaging spectrometer based on the same imaging technology used in the Stillwater core room C{sub 2}OG sensor. The Stillwater Mining Company has estimated that this type of imaging system could lead to a 10% reduction in waste rock from their mine and provide a $650,000 benefit per year. The proposed system may also lead to an additional 10% of ore tonnage, which would provide a total economic benefit of more than $3.1 million per year. If this benefit could be realized on other metal ores for which the proposed technology is suitable, the possible economic benefits to U.S. mines is over $70 million per year. In addition to these currently lost economic benefits, there are also major energy losses from mining waste rock and environmental impacts from mining, processing, and disposing of waste rock.

Molybdenum extraction from copper-molybdenum ores

International Nuclear Information System (INIS)

Nevaeva, L.M.

1982-01-01

Molybdenum extraction from copper-molybdenum ores as practised in different countries is reviewed. In world practice the production process including depression of copper and iron sulfides and flotation of molybdenite is widely spread. At two USA factories the process of a selective flotation with molybdenite depression by dextrin is used

Gold-copper ores processing-Case study: optimization of flotation residue cyanidation

International Nuclear Information System (INIS)

McMullen, J.; Pelletier, P.; Breau, Y.; Pelletier, D.

1999-01-01

Typically, economic optimization of Gold-Copper ore processing presents challenges. Barrick's Bousquet II ore is a good example where many processing units such as gravity, flotation and cyanidation are required to efficiently recover the metals from the ore. Flowsheet criterion, operating strategy selections, cyanidation process optimization and its inter-dependence with flotation are discussed in detail. Real-time conservation integration of the cyanide control strategy has allowed a reduction of cyanide consumption of over 40% since 1994, while maintaining or improving metals recovery. A detailed analysis of the cyanidation control strategy such as key process sensor reliability and accuracy, process monitoring and fault detection is presented. This robust and efficient control strategy is a key building block that enhances the overall economic return of the process plant. (author)

Modelling of Coke Layer Collapse during Ore Charging in Ironmaking Blast Furnace by DEM

Science.gov (United States)

Narita, Yoichi; Mio, Hiroshi; Orimoto, Takashi; Nomura, Seiji

2017-06-01

A technical issue in an ironmaking blast furnace operation is to realize the optimum layer thickness and the radial distribution of burden (ore and coke) to enhance its efficiency and productivity. When ore particles are charged onto the already-embedded coke layer, the coke layer-collapse phenomenon occurs. The coke layer-collapse phenomenon has a significant effect on the distribution of ore and coke layer thickness in the radial direction. In this paper, the mechanical properties of coke packed bed under ore charging were investigated by the impact-loading test and the large-scale direct shear test. Experimental results show that the coke particle is broken by the impact force of ore charging, and the particle breakage leads to weaken of coke-layer strength. The expression of contact force for coke in Discrete Element Method (DEM) was modified based on the measured data, and it followed by the 1/3-scaled experiment on coke's collapse phenomena. Comparing a simulation by modified model to the 1/3-scaled experiment, they agreed well in the burden distribution.

Assessing the impact of iron ore mining to the groundwater in Goa, using stable isotopes

International Nuclear Information System (INIS)

Arzoo Ansari, Md.; Sinha, U.K.; Mohokar, H.V.; Deodhar, Archana; Mendhekar, G.N.; Jaryal, Ajay

2017-01-01

Goa contributes about 50% of the total iron ore exported from the country. Iron ore share is 95% of total mining and quarrying sector in Goa. It represents the second most important industry next to tourism. The iron ore is predominantly mined by opencast mining throughout Goa. The reduction of the forest cover, huge dumps, dust mineral particles, water contamination and health problems are some of the principal harmful effects of extensive mining which is of great concern to the environment. The objective of this study is to assess the impact of iron ore mining to groundwater in downstream side of the mine pits using isotope hydrological techniques

Uranium ore deposits

International Nuclear Information System (INIS)

Angelelli, Victorio.

1984-01-01

The main uranium deposits and occurrences in the Argentine Republic are described, considering, in principle, their geologic setting, the kind of 'model' of the mineralization and its possible origin, and describing the ore species present in each case. The main uraniferous accumulations of the country include the models of 'sandstong type', veintype and impregnation type. There are also other kinds of accumulations, as in calcrete, etc. The main uranium production has been registered in the provinces of Mendoza, Salta, La Rioja, Chubut, Cordoba and San Luis. In each case, the minerals present are mentioned, having been recognized 37 different species all over the country (M.E.L.) [es

[Biooxidation of gold-bearing sulfide ore and subsequent biological treatment of cyanidation residues].

Science.gov (United States)

Kanaev, A T; Bulaev, A G; Semenchenko, G V; Kanaeva, Z K; Shilmanova, A A

2016-01-01

The percolation biooxidation parameters of ore from the Bakyrchik deposit were studied. An investigation of the technological parameters (such as the concentration of leaching agents, irrigation intensity, and pauses at various stages of the leaching) revealed the optimal mode for precious metal extraction. The stages of the ore processing were biooxidation, gold extraction by cyanidation or thiosulfate leaching, and biological destruction of cyanide. The gold and silver recovery rates by cyanidation were 64.0 and 57.3%, respectively. The gold and silver recovery rates by thiosulfate leaching were 64.0 and 57.3%, respectively. Gold and silver recovery rates from unoxidized ore (control experiment) by cyanidation were 20.9 and 26.8%, respectively. Thiosulfate leaching of unoxidized ore allowed the extraction of 38.8 and 24.2% of the gold and silver, respectively. Cyanidation residues were treated with bacteria of the genus Alcaligenes in order to destruct cyanide.

Use of nuclear geophysical methods in exploration of ore field in Kirgizia

International Nuclear Information System (INIS)

Afanas'ev, A.V.; Erkhov, V.A.; Kopytov, Yu.Ya.; Makarov, Yu.I.; Tikhonov, A.I.; Ushan, V.S.; Shvartsman, Yu.I.; Yudakhin, F.N.

1974-01-01

X-ray diffraction logging is quite effective in the determination of the tin content of powder samples. The Mineral-3 apparatus is used, it assays 40 samples a shift with an analysis accuracy of 0.02 to 0.03 per cent of Sn. At present X-ray diffraction analyses are made for Sn, W and Sb. X-ray diffraction logging for Sn has been made since 1969. Its threshold sensitivity is abouj 0.12 per cent Sn. During three years 132 boreholes were tested. Using Sb, the method's threshold sensitivity is 0.4 per cent Sb. Gamma-neutron logging has been applied to determine Be with a resulting sensitivity of 0.01 per cent in horizontal and inclined boreholes on a rare-metal ore deposit. In recent years neutron-capture spectrometric gamma-logging has been tested and implemented in combination with X-ray diffraction logging on mercury deposits. The sensitivity of neutron-capture spectrometric gamma-logging analyses is about 0.06 to 0.08 per cent Hg; the method unambiguously localizes mercury mineralization and is not affected by Ba, Sb, caverns or fracturing. It is, however, some what affected by Fe and variations in the lithological composition of the rocks

Fe extraction from çayeli copper ores by bioleaching with eco freiendly acidithiobacillus ferrooxidans

International Nuclear Information System (INIS)

Kocadagistan, M.E.; Bayhan, Y.K.

2017-01-01

Recently, biological treatment; an important recovery process, has became important from the environmental and economical respects in recovery of metallic values from low-grade sulfur-bearing ores or concentrates. Bacterial ore leaching can be applied to extract heavy metals from low grade ores, industrial wastes and other materials on an industrial scale by different procedures. The main objective of this work was to investigate the dissolution of Fe from Çayeli copper ores, via a bioleaching process using Acidithiobacillus ferrooxidans. Experiments performed with batch operation in jar test equipment were conducted at different pH values, pulp densities, inoculum volumes, particle sizes, stirring conditions and operation times. The optimal parameters were found as follows; at pH 2, the pulp density; 4% (w/v), inoculum volume; 4% (v/v), stirring rate; 120 rpm and particle size; -0.053 mm for 192nd and 288th hours, at pH 2, the pulp density; 4% (w/v), inoculum volume; 5% (v/v), stirring speed; 200 rpm and particle size; -0.053 mm for 384th and 480th hours. By performing the bioleaching process under these conditions, almost 99% of the iron extent in the ore was transfer from ore into solution, however the experiments in which distilled water was used instead of modified 9K*, only 18.5% Fe efficiency was obtained. (author)

The role of granites for the ore mineralization in South German Variscides

International Nuclear Information System (INIS)

Dill, H.G.

1987-01-01

Granites are of widespred occurrence in the South German Variscides (F.R. of Germany), the Black Forest (=BF), and the NE Bavarian Basement (=NEBB). These areas are crossed by the Saxothuringian-Moldanubian plate boundary and were also affected by crustal subdulction and nappe tectonism, both of which are thought to be responsible for granitisation and enrichment of Sn, W,U,Au, Sb,Pb,Zn,F, and Ba in veins of different kind. Heat produced by gliding of plates above each other, by decay of radioctive elements in granites as well as set free by the granites themselves caused the above-mentioned elements to be released from their protores, which formed during Late Proterozoic and Early Paleozoic rifting. These hypogene ore mineralizations may be crudely subdivided into thrustbound, granite-related and granite-induced ore deposites. During Tertiary-Quaternary these granites were exposed the pervasive weathering under subtropical conditions, so that ''U yellow ores'' and china clay deposits came into existence. The whole ore mineralization in that region may be explained by a simple four-step model: preconcentration, fracturation, activation and peneplaination. (author) [pt

Uranium and Molybdenum extraction from a Cerro Solo deposit ore

International Nuclear Information System (INIS)

Becquart, Elena T.; Arias, Maria J.; Fuente, Juan C. de la; Misischia, Yamila A.; Santa Cruz, Daniel E.; Tomellini, Guido C.

2009-01-01

Cerro Solo, located in Chubut, Argentina, is a sandstone type uranium-molybdenum deposit. Good recovery of both elements can be achieved by acid leaching of the ore but the presence of molybdenum in pregnant liquors is an inconvenient to uranium separation and purification. A two steps process is developed. A selective alkaline leaching of the ore with sodium hydroxide allows separating and recovering of molybdenum and after solid-liquid separation, the ore is acid leached to recover uranium. Several samples averaging 0,2% uranium and 0,1% molybdenum with variable U/Mo ratio have been used and in both steps, leaching and oxidant reagents concentration, temperature and residence time in a stirred tank leaching have been studied. In alkaline leaching molybdenum recoveries greater than 96% are achieved, with 1% uranium extraction. In acid leaching up to 93% of the uranium is extracted and Mo/U ratio in solvent extraction feed is between 0,013 and 0,025. (author)

Technical and economic benefits of nuclear techniques in ore processing

International Nuclear Information System (INIS)

1989-08-01

This report is the outcome of an Advisory Group Meeting organized by the Agency and hosted by the Institute of Physics and Nuclear Techniques, the Academy of Mining and Metallurgy in Krakow, Poland. The purpose of the meeting was to assess the technical and economic benefits of applying nuclear techniques in ore processing industry. Nucleonic control systems and nuclear on-line analytical techniques as well as radioisotope tracer tests and their applications in metallic ore-processing, coal production, and cement fabrication were discussed. This report contains a summary and the presentations dealing with nuclear techniques for process control made at this meeting. Using a number of case-histories as examples, it illustrates technical and economic benefits obtainable by the installation of nuclear process control instrumentation. It is expected to be useful for everybody dealing with ore and coal production, but especially for administrative personnel and engineers who plan and implement national development programmes related to mineral resources. Refs, figs and tabs

Four magnetite generations in the Precambrian Varena Iron Ore deposit, SE Lithuania, as a result of rock-fluid interactions

Science.gov (United States)

Skridlaite, Grazina; Prusinskiene, Sabina; Siliauskas, Laurynas

2017-04-01

Iron ores in Precambrian crystalline basement of the Varena area, SE Lithuania, were discovered during the detail geological-geophysical exploration in 1982-1992. They are covered with 210-500 m thick sediments. The Varena Iron Ore deposit (VIOD) may yield from 71 to 219.6 million tons of iron ore according to different economic evaluations (Marfin, 1996). They were assumed to be of metasomatic and hydrothermal origin, however several other hypotheses explaining the VIOZ origin, e.g. as a layered mafic or carbonatite intrusions were also suggested. Magnetites of the VIOD were thoroughly investigated by the Cameca SX100 microprobe at the Warsaw University and by the Quanta 250 Energy Dispersive Spectroscopy (EDS) at the Nature Research Centre in Vilnius, Lithuania. Four generations of magnetite were distinguished in the studied serpentine-magnetite ores (D8 drilling) and were compared with the earlier studied and reference magnetites. The earliest, spinel inclusion-rich magnetite cores (Mag-1) have the highest trace element contents (in wt%): Si (0.032), Al (0.167-0.248), Mg (0.340-0.405), Ti (0.215-0.254), V (0.090-0.138) etc. They might have formed during an early metamorphism and/or related skarn formation. Voluminous second magnetite (Mag-2) replacing olivine, pyroxenes, spinel and other skarn minerals at c. 540o C (Magnetite-Ilmenite geothermometer) has much lower trace element abundances, probably washed out by hydrothermal fluids. The latest magnetites (Mag-3 and Mag-4) overgrow the earlier ones and occur near or within the sulfide veins (Mag-4). As was observed from microtextures, the Mag-3 and Mag-4 have originated from the late thermal reworking by dissolution-reprecipitation processes. To imply an origin of the studied magnetites, they were compared to the earlier studied magmatic-metamorphic (1058 drilling), presumably skarn (982 drilling) magnetites from the studied area and plotted in the major magnetite ore type fields according to Dupuis and Beaudoin

Methodological approaches in estimating anomalous geochemical field structure

International Nuclear Information System (INIS)

Gavrilov, R; Rudmin, M

2015-01-01

Mathematical statistic methods were applied to analyze the core samples from vertical expendable wells in Chertovo Koryto gold ore field. The following methods were used to analyse gold in samples: assay tests and atomic absorption method (AAS), while emission spectrum semiquantative method was applied to identify traces. The analysis of geochemical association distribution in one central profile demonstrated that bulk metasomatic aureoles are characteristic of concentric zonal structure. The distribution of geochemical associations is correlated to the hydrothermal stages of mineral formation identified in this deposit. It was proved that the processed geochemical data by factor and cluster analyses provided additional information on the anomalous geochemical field structure in gold- bearing black-shale strata. Such methods are effective tools in interpretating specific features of geochemical field structures in analogous potential ore-bearing areas

Beneficiation strategy for some low grade ores of strategic metals in India

International Nuclear Information System (INIS)

Krishna Rao, N.

1997-01-01

In developing indigenous resources of strategic metals, beneficiation strategy has a major role to play, particularly where the ores are of low tenor. Presently India imports most of its requirements of metals like tin, tungsten, molybdenum, nickel and cobalt. In all these cases important low grade resources occur in the country. Beneficiation strategy necessary for exploitation of these deposits are discussed based mainly on vast batch and semi plant scale data generated in the Ore Dressing Section of Bhabha Atomic Research Centre. Also discussed is the case of strategic metal uranium where, in certain cases pre-concentration by beneficiation has the potential to make it feasible the exploitation of otherwise difficult to process ore resources. (author)

Manganese Ores from South Sulawesi: Their Potential Uses as Raw Materials for Metallurgical Industry

Directory of Open Access Journals (Sweden)

Sufriadin Sufriadin

2017-03-01

Full Text Available Characterization of manganese ores from Barru and Bone regencies of South Sulawesi has been conducted with the aim at clarification of their mineralogical and chemical composition for their potential uses as the raw materials for metallurgical industry. Mineralogical properties of the ores analyzed by means of optical microscopy and X-ray diffractometry (XRD show that samples from Barru consist mainly of rhodochrosite (MnCO3 with less cryptomelane, groutite, bixbyite, and todorokite. Goethite, calcite and small amount of quartz present as impurities. Manganese ore samples from Bone are predominantly composed of pyrolusite (MnO2 with subordinate ramsdellite and hollandite. Barite, quartz, hematite and clay are present as gangue minerals. Chemical compositions determined by using XRF method revealed that Barru samples contain higher in MnO (average is 40.07 wt% than the Bone samples (average is 34.36 wt%. Similarly, Fe2O3 and CaO are also higher in Barru than those of the Bone samples. In contrast, concentrations of SiO2 and total alkali (K2O + Na2O are lower in the Barru samples. The average P2O5 content of samples in both areas is low (<0.2 wt%. Relatively higher grade of Fe2O3 in the Barru ore implies that it has potential application for ferromanganese production; whereas the elevated SiO2 content of the Bone ore is a good indication for silicomanganese manufacture. However, both ores may not favorable to be directly used as raw materials in metallurgical uses. Prior to be used, the ores should be treated by applying physical beneficiation in order to reduce deleterious elements.

Intensification of the Reverse Cationic Flotation of Hematite Ores with Optimization of Process and Hydrodynamic Parameters of Flotation Cell

Science.gov (United States)

Poperechnikova, O. Yu; Filippov, L. O.; Shumskaya, E. N.; Filippova, I. V.

2017-07-01

The demand of high grade iron ore concentrates is a major issue due to the depletion of rich iron-bearing ores and high competitiveness in the iron ore market. Iron ore production is forced out to upgrade flowsheets to decrease the silica content in the pelettes. Different types of ore have different mineral composition and texture-structural features which require different mineral processing methods and technologies. The paper presents a comparative study of the cationic and anionic flotation routes to process a fine-grain oxidized iron ore. The modified carboxymethyl cellulose was found as the most efficient depressant in reverse cationic flotation. The results of flotation optimization of hematite ores using matrix of second-order center rotatable uniform design allowed to define the collector concentration, impeller rotation speed and air flowrate as the main flotation parameters impacting on the iron ore concentrate quality and iron recovery in a laboratory flotation machine. These parameters have been selected as independent during the experiments.

Management of wastes containing radioactivity from mining and milling of uranium ores in Northern Australia

International Nuclear Information System (INIS)

Costello, J.M.

1977-01-01

The procedures and controls to achieve safe management of wastes containing radioactivity during the mining and processing of uranium ores are mainly site specific depending on the nature, location and distribution of the ore and gangue material. Waste rock and below-ore-grade material containing low levels of radioactivity require disposal at the mine site. In open cut mining the material is generally stockpiled above ground, with revegetation and collection of run-off water. Some material may be used to backfill open cuts. Management of these wastes requires a thorough investigation of ground water hydrology and surface soil characteristics to control dissipation of radioactive material. Dust containing radon and radioactive particulate is produced during ore milling, and dusts of ore concentrate are generated during calcination and packaging of the yellowcake product. These dusts are managed by ventilation and filtration systems, working conditions, and discharges to atmosphere will be according to the Australian Code of Practice on Radiation Protection during Mining and Milling of Uranium Ores. The chemical waste stream from leaching and processing of the uranium ores contains the majority of the radioactivity resulting from radium and its decay products. Neutralised effluent is discharged into holding ponds for settling of solids. This paper describes the nature of wastes containing radioactivity resulting from the mining and milling of uranium, and illustrates modern engineering practices and monitoring procedures to manage the wastes, as described in the Environmental Impact statement produced by Ranger Uranium Mines Proprietary Limited for public hearings

Chemical treatment of uranium ores in France

International Nuclear Information System (INIS)

Mouret, P.; Sartorius, R.

1958-01-01

The various processes of chemical treatment of uranium ores, from the oldest to the more recent, are exposed, considering the following conditions: economics, geography, techniques and safety. The interest of obtaining a final concentrate as uranyl nitrate is discussed. (author) [fr

THE ROLE OF DYNAMOMETAMORPHISM IN THE FORMATION OF THE MUKODEK GOLD FIELD (NORTH PRIBAIKALIE

Directory of Open Access Journals (Sweden)

V. A. Vanin

2017-01-01

Full Text Available The Mukodek gold field is discussed as an example proving that dynamometamorphism is a major factor in the formation of gold deposits in the Abchad fault zone. This deposit belongs to the gold‐silver‐ore zones of mylonitization and schistosity. The ore source is related to the original host rocks with an increased geochemical background concentration of Au. Due to dynamometamorphism processes, gold particles are abundant and mostly enlarged. From the primary rocks, the dynamometamorphites inherit a positive correlation between the number of particles and the concentrations of gold. The dynamometamorphic complex of the ore field developed in two stages, as a minimum. At the early stage (321.0±1.9 Ma, the host rocks were mechanochemically deformed and transformed into the gold‐ bearing mineralized dynamometamorphites containing sericite, chlorite, ankerite, albite, and quartz. In the second stage (280±15 Ma, the albite‐dolomite‐quartz ore veins were formed. Such veins have industrial gold contents.

Analytical fingerprint for tantalum ores from African deposits

Science.gov (United States)

Melcher, F.; Graupner, T.; Sitnikova, M.; Oberthür, T.; Henjes-Kunst, F.; Gäbler, E.; Rantitsch, G.

2009-04-01

Illegal mining of gold, diamonds, copper, cobalt and, in the last decade, "coltan" has fuelled ongoing armed conflicts and civil war in a number of African countries. Following the United Nations initiative to fingerprint the origin of conflict materials and to develop a traceability system, our working group is investigating "coltan" (i.e. columbite-tantalite) mineralization especially in Africa, also within the wider framework of establishing certified trading chains (CTC). Special attention is directed towards samples from the main Ta-Nb-Sn provinces in Africa: DR Congo, Rwanda, Mozambique, Ethiopia, Egypt and Namibia. The following factors are taken into consideration in a methodological approach capable of distinguishing the origin of tantalum ores and concentrates with the utmost probability: (1) Quality and composition of coltan concentrates vary considerably. (2) Mineralogical and chemical compositions of Ta-Nb ores are extremely complex due to the wide range of the columbite-tantalite solid solution series and its ability to incorporate many additional elements. (3) Coltan concentrates may contain a number of other tantalum-bearing minerals besides columbite-tantalite. In our approach, coltan concentrates are analyzed in a step-by-step mode. State-of-the-art analytical tools employed are automated scanning electron microscopy (Mineral Liberation Analysis; MLA), electron microprobe analysis (major and trace elements), laser ablation-ICP-MS (trace elements, isotopes), and TIMS (U-Pb dating). Mineral assemblages in the ore concentrates, major and trace element concentration patterns, and zoning characteristics in the different pegmatites from Africa distinctly differ from each other. Chondrite-normalized REE distribution patterns vary significantly between columbite, tantalite, and microlite, and also relative to major element compositions of columbites. Some locations are characterized by low REE concentrations, others are highly enriched. Samples with

Status Report from Sweden [Processing of Low-Grade Uranium Ores

Energy Technology Data Exchange (ETDEWEB)

Peterson, A [AB Atomenergi, Stockholm (Sweden)

1967-06-15

The Ministry of Education was authorized in November 1945 to appoint a commission to study the organization of nuclear energy research. In April 1947 this commission, the Swedish Atomic Energy Commission, proposed the formation of a semi-state-owned company to be a central body for applied research work and development in the nuclear energy field in Sweden. In November 1947 the Atomic Energy Company (AB Atomenergi) had its statutory meeting. The State owns 4/7 of the share capital and the remaining 3/7 is owned by 71 private and municipal share-holders. Except for a part of the stock capital, all investments and running costs of the company have been financed by the Government. The company is in practice answerable to the Department of Commerce which has an advisory body, the Atomic Energy Board. AB Atomenergi is responsible for Government-financed research on the industrial applications of nuclear energy, the milling of uranium ores and refining of uranium. The total number of employees is at present about 1400, 800 of which work at the company's research establishment Studsvik about 120 km south of Stockholm. As early as 1945 the Research Institute of the Swedish National Defence started work in the field of uranium processing. Similar work was also started quite early by the Boliden Mining Company, the Swedish Shale Oil Company and Wargons AB. After the establishment of AB Atomenergi, all work in the uranium processing field was transferred to this company. In fact one of the main reasons for the formation of AB Atomenergi was the need for Swedish uranium production as there was no possibility of importing uranium at that time. As a result of research and development in uranium processing a pilot plant at Kvarntorp near Orebro in central Sweden started milling a low-grade uranium ore (shale) in 1953. The capacity of this plant was 5-10 tons of uranium a year. A uranium mill at Ranstad in south-west Sweden, near Skovde, with a capacity of 120 tons of uranium a

Multistage dilute acid leaching of a medium grade iron ore to super-concentrate

Directory of Open Access Journals (Sweden)

Adeleke A.A.

2014-01-01

Full Text Available The phosphorous laden Koton Karfe iron ore is a medium grade iron ore deposit in Nigeria that can be upgraded as a super-concentrate for use at the Aladja Steel Midrex plant. The 75 μm size sample fraction of the ore was preconcentrated with shaking table and leached in the oven at atmospheric pressure with dilute hydrochloric acid in single and multistage leaching sequences of H2O-HCl-H2O and HCl-H2O-H2O. The as-received, as-tabled and asleached samples were then subjected to X-ray fluorescence and microscopic analyses. The results obtained showed that the H2O-HCl-H2O route produced a higher grade concentrate that assayed 68.54% Fe indicating about 58% upgrade in iron content; while the phosphorus and sulphur contents were reduced by about 77 and 99.6% respectively. In addition, the silicon, manganese, and titanium contents were drastically reduced, while potassium was completely eliminated. The upgrade of iron content in the ore to 68.54% and the drastic reduction in phosphorous and sulphur contents has thus rendered the Koton Karfe iron ore suitable for use as a super concentrate for the Aladja steel plant direct reduction iron making process.

Technical application of agglomerated acidic heap leaching of clay-bearing uranium ore in China

International Nuclear Information System (INIS)

Zeng Yijun; Li Jianhua; Li Tieqiu; Zhong Pingru

2002-01-01

The permeability of ore mass has a great influence on the leaching period of heap leaching and the leaching efficiency, hence the uranium ores with high content of clay is difficult to acidic heap leaching. The Research Institute of Uranium Mining has engaged several years studies on the cementing agents of acidic agglomeration, agglomeration conditions, as well as the curing measures of agglomerated balls. On the basis of these studies, several types of clay-bearing ores have been tested with good results. The technique of agglomerated acidic heap leaching has been successfully applied in a uranium mine. Since agglomeration has effectively increased the permeability of ore heap, its leaching period is decreased from 200 days to 60 days, the leaching efficiency is increased to 96% from less than 40% comparing with direct heap leaching program

Extraction of uranium from coarse ore and acid-curing and ferric sulphate-trickle leaching process

International Nuclear Information System (INIS)

Jin Suoqing

1994-01-01

On the basis of analysis of the problems in the technology of the traditional uranium hydrometallurgy and the limitations of thin layer leaching process (TLL), a new leaching system-acid-curing and ferric sulphate-trickle leaching (AFL) process (NGJ in Chinese) has developed for extraction of uranium from the coarse ore. The ferric sulphate solution was used for trickling the acid-cured uranium ore and the residual leaching reaction incomplete in TLL process can be improved in this process. And the AFL process has a wide applicability to China's uranium ores, being in competition with the traditional agitation leaching process for treating coarse ores. The uranium ore processing technology based on the AFL process will become one of the new basic technologies of uranium hydrometallurgy. A series of difficulties will be basically overcome associated with fine grinding because of its elimination in the presented process. Moreover, the situation of the present uranium hydrometallurgy can be also changed owing to without technological effluent discharge

In situ recovery of copper from sulfide ore bodies following nuclear fracturing

Energy Technology Data Exchange (ETDEWEB)

Rosenbaum, Joe B; McKinney, W A [Salt Lake City Metallurgy Research Center, Bureau of Mines, US Department of the Interior, Salt Lake City, UT (United States)

1970-05-15

Leaching now yields about 12 percent of the Nation's annual new copper production. About 200,000 tons of copper a year is being won by heap and vat leaching of ore, dump leaching of waste, and in-place leaching of caved underground workings. Although in-place leaching was practiced as long ago as the 15th century, it is little used and contributes only a few percent of the total leach copper production. Current technology in this area is exemplified by practice at the Miami, Ariz., mine of the Miami Copper Co. Despite its limited use, the concept of extracting copper by in-place leaching without physically mining and transporting the ore continues to present intriguing cost saving possibilities. Project SLOOP has been proposed as an experiment to test the feasibility of nuclear fracturing and acid leaching the oxidized portion of a deep ore body near Safford, Ariz. However, the bulk of the copper in deep ore deposits occurs as sulfide minerals that are not easily soluble in acid solutions. This paper explores the concept of in-place leaching of nuclear fractured, deeply buried copper sulfide deposits. On the assumption that fracturing of rock and solution injection and collection would be feasible, an assessment is made of solution systems that might be employed for the different copper sulfide minerals in porphyry ore bodies. These include the conventional ferric sulfate-sulfuric acid systems and combinations of sulfide mineral oxidants and different acids. (author)

In situ recovery of copper from sulfide ore bodies following nuclear fracturing

International Nuclear Information System (INIS)

Rosenbaum, Joe B.; McKinney, W.A.

1970-01-01

Leaching now yields about 12 percent of the Nation's annual new copper production. About 200,000 tons of copper a year is being won by heap and vat leaching of ore, dump leaching of waste, and in-place leaching of caved underground workings. Although in-place leaching was practiced as long ago as the 15th century, it is little used and contributes only a few percent of the total leach copper production. Current technology in this area is exemplified by practice at the Miami, Ariz., mine of the Miami Copper Co. Despite its limited use, the concept of extracting copper by in-place leaching without physically mining and transporting the ore continues to present intriguing cost saving possibilities. Project SLOOP has been proposed as an experiment to test the feasibility of nuclear fracturing and acid leaching the oxidized portion of a deep ore body near Safford, Ariz. However, the bulk of the copper in deep ore deposits occurs as sulfide minerals that are not easily soluble in acid solutions. This paper explores the concept of in-place leaching of nuclear fractured, deeply buried copper sulfide deposits. On the assumption that fracturing of rock and solution injection and collection would be feasible, an assessment is made of solution systems that might be employed for the different copper sulfide minerals in porphyry ore bodies. These include the conventional ferric sulfate-sulfuric acid systems and combinations of sulfide mineral oxidants and different acids. (author)

The redox reaction kinetics of Sinai ore for chemical looping combustion applications

International Nuclear Information System (INIS)

Ksepko, Ewelina; Babiński, Piotr; Nalbandian, Lori

2017-01-01

Highlights: • Redox reaction kinetics of Fe-Mn-rich Sinai ore was determined by TGA. • The most suitable model for reduction was D3, while R3 for oxidation. • Activation energies 35.3 and 16.70 kJ/mole were determined for reduction and oxidation. • Repetitive redox reactions favor the formation of spinel phases in Sinai ore. • Multiple redox cycles induce formation of extensive porosity of the particles. - Abstract: The objective of this work was to study the use of Sinai ore, a Fe–Mn-based ore from Egypt, as a low-cost oxygen carrier (OC) in Chemical Looping Combustion (CLC). The Sinai ore was selected because it possesses relatively high amounts of iron and manganese oxides. Furthermore, those oxides have low cost, very favorable environmental and thermodynamic properties for the CLC process. The performance of the Sinai ore as an OC in CLC was compared to that of ilmenite (Norway Tellnes mine), the most extensively studied naturally occurring Fe-based mineral. The kinetics of the reduction and oxidation reactions with the two minerals were studied using a thermogravimetric analyzer (TGA). Experiments were conducted under isothermal conditions, with multiple redox cycles, at temperatures between 750 and 950 °C. For the reduction and oxidation reactions, different concentrations of CH_4 (10–25 vol.%) and O_2 (5–20 vol.%) were applied, respectively. The kinetic parameters, such as the activation energy (E_a), pre-exponential factor (A_0), and reaction order (n), were determined for the redox reactions. Furthermore, models of the redox reactions were selected by means of a model-fitting method. For the Sinai ore, the D3 model (3-dimensional diffusion) was suitable for modeling reduction reaction kinetics. The calculated E_a was 35.3 kJ/mole, and the reaction order was determined to be approximately 0.76. The best fit for the oxidation reaction was obtained for the R3 model (shrinking core). The oxidation (regeneration) reaction E_a was equal to 16

Vat leaching of gold ores and utilization of the tailings; Kinkoseki no vat leaching to koshi no yuko riyo

Energy Technology Data Exchange (ETDEWEB)

Hosooka, T. [Nippon Clay Mining Co. Ltd., Tokyo (Japan); Miyagawa, H. [Mitsui Mining and Smelting Co. Ltd., Tokyo (Japan)

1996-01-25

Mitsui Kushikino Mine previously processed two gold ores from Kushikino and Iwato ore deposits by the all slime cyanidation method, where the ores were ground to fine size smaller than 75 {mu}m and leached with sodium, cyanide. A large amount of slimes were produced as waste and discarded in tailings ponds. To save the costs of grinding and waste treatment it is desirable to process coarse sized ores. The Iwato ore is gold and silver bearing silicified porous rock. As most gold and silver in the Iwato ore are concentrated in the pores, leaching of coarse sized ore is expected to be possible. Laboratory tests and pilot plant tests of vat leaching for the Iwato ore were carried out using 0.15-8.0 mm feed. These results showed that the gold dissolution rate was similar to that by the all slime cyanidation and the decrease in gold recovery was a few %. The properties of these tailings can be used in fine aggregate of concrete. Based on the results vat leaching of the Iwato ore was adopted in the plant. The tailings are sold and used as fine aggregate. Utilization of slime tailings from the other ores was also developed and they are used as flux in copper smelters. Now, there is no tailings pond at Mitsui Kushikino Mine. 9 refs., 10 figs., 5 tabs.

Supplying the six. [Supplies of nuclear fuels and ores to the European Community

Energy Technology Data Exchange (ETDEWEB)

Oboussier, F

1975-07-01

Under the Euratom Treaty, the European Community must ensure that all users in the Community receive a regular and equitable supply of ores and nuclear fuels. Supply to users in the Community of ores, source materials, and special fissile materials is based on the principle of equal access of the users to the supply sources. To ensure such equal access, the Treaty prohibits all practices designed to secure a privileged position for certain users. In addition, an agency has been set up with two essential rights--that of an option on all ores, source materials, and special fissile materials produced in the territories of the Member States; and the exclusive right to conclude all contracts relating to the supply of ores, source materials, and special fissile materials coming from inside the Community or from outside. Dealings of the Agency with outside agencies, especially the former US AEC, are described. The uranium market and its economics and the availability of special fissile materials are summarized. (MCW)

Flotation-nitric acid leach procedure for increasing uranium recovery from a refractory ore

International Nuclear Information System (INIS)

Carnahan, T.G.; Lei, K.P.V.

1979-01-01

The Bureau of Mines investigated a flotation-nitric acid leach procedure as part of the goal to maximize minerals and metals recovered from primary and secondary domestic resources. Studies were conducted on an ore that contained carbon-bearing and sulfide mineralization that rendered a portion of the ore refractory (resistant) to conventional leaching technology. The procedure investigated for treating the ore consisted of the following: (1) separation by flotation of the carbonaceous and sulfidic components from the ore, (2) leaching the flotation concentrate with nitric acid at 100 0 to 110 0 C, (3) leaching the flotation tailings with sulfuric acid, and (4) processing the combined leached slurries in a conventional manner to recover yellow cake. In step 2, HNO 3 is converted to gaseous products from which it is regenerated by reacting these products with air and water for further leaching. An overall uranium extraction of 96% was achieved by this procedure

On-line sampling of apatite-nepheline ore using apron feeders by gamma-gamma method

Energy Technology Data Exchange (ETDEWEB)

Bliznyuk, G.I.

1981-01-01

The yield flow of an underground mine equipped with a crushing complex was investigated. /sup 241/Am source and 20x20 mm NaI(Tl) crystal were used; the lump size of apatite-nepheline ore was 200 mm, P/sub 2/O/sub 5/ content varied from 10 to 22%. The mean-square error was 1% P/sub 2/O/sub 5/ in 100-ton portions of mined ore. The method can be also applied for sampling iron, copper-nickel, and polymetallic ores.

Application of X-ray luminescence separation to preliminary enrichment of lean scheelite-containing ores

International Nuclear Information System (INIS)

Zhaboev, M.N.; Semochkin, G.A.; Blinov, Yu.I.; Dzhambaev, F.M.; Novikov, V.V.; Tereshchenko, S.V.

1987-01-01

Investigations of preliminary enrichment of lean ores of amphibole hornfels by the method of X-ray luminescence separation was conducted. Pile and enriched products with different WO 3 content were obtained from these ores; WO 3 content in pile products was 2-2.5 times lower as compared to factory tailing products. WO 3 content in separator concentrate corresponds in all cases to the requirements for the ore designated for flotation enrichment. Carbonate modulus decreases 2.5-4 times in separation concentrate, simplifying the conditions of flotation

Uranium deposits of the Asian sector of Pacific ocean ore belt

International Nuclear Information System (INIS)

Kazanskij, V.I.

1995-01-01

Brief description of three basic types of uranium ore deposits in the Asian sector of the Pacific Ocean ore belt, namely uranium-molybdenum vein deposits in the continental volcanic depressions, proper uranium-molybdenum vein deposits in the mesozoic granites and gold-brannerite deposits of the rejuvenated early-proterosoic fractures is given. Schemes of various deposits are presented, petrological and isotope data (K-Ar method) are considered and petro- and oregenesis are analyzed. refs., 9 figs

Column leaching experiments of a uranium ore by atomizing irrigation technique

International Nuclear Information System (INIS)

Zeng Yingying; Lei Zeyong; Chen Haihui

2007-01-01

Column leaching experiments ora uranium ore were made by atomizing irrigation technique. The leaching results are compared with the results obtained by spray irrigation and drip irrigation techniques respectively under the same conditions of column leaching experiments. The results show that the atomizing irrigation technique has more uniform solution distribution, higher leaching rate, shorter leaching period, and less ratio of liquid to solid. Consequently, the atomizing irrigation technique is suitable to the ore. (authors)

Radiotracer investigations of benefication copper ore in the industrial flotation process

International Nuclear Information System (INIS)

Petryka, L.; Przewlocki, K.

1983-01-01

Optimization of copper ore processing requires in particular the investigation of the flotation process. 64 Cu induced in natural ore by activation was used as a tracer. Detailed measurements were performed in an industrial flotation plant consisting of 14 cells. As a result the mean residence time of different grain size fractions of natural copper sulphide was determined for all parts of the flotation plant together with the efficiency of the flotation process. (author)

Optimization of copper ore concentration processing by means of radioactive tracers

International Nuclear Information System (INIS)

Petryka, L.; Przewlocki, K.

1989-01-01

Flotation of polymetallic ores in the Polish Lower Silesian Basin was taken as an example for the optimization of copper ore processing using radioactive tracers. An original stochastic mathematical model (stream model) was proposed to minimize copper losses in tailing. A detailed procedure of measurement is presented as well as the experimental data and their interpretation. On the basis of this research copper losses in tailing can be reduced to one third. (author)

Niobium ore OKA-1

International Nuclear Information System (INIS)

Steger, H.F.; Bowman, W.S.

1981-01-01

A 287-kg sample of a niobium ore, OKA-1, from Oka, Quebec, was prepared as a compositional reference material. OKA-1 was ground to minus 74 μm, blended in one lot, tested for homogeneity by X-ray fluorescence and chemical methods and bottled in 200-g units. In a 'free-choice' round-robin analytical program, 22 laboratories contributed results for niobium in each of two bottles of OKA-1. A statistical analysis of the data gave a recommended value of 0.37 +- 0.01% for niobium

A discussion on several problems in determination of uranium ore grade criteria

International Nuclear Information System (INIS)

Zhu Zhixiang.

1991-01-01

The course of determination of uranium ore grade criteria in China is briefly introduced. The cut-off grade minimum industrial grade and allowable minimum average grade uranium ore bodies used in China are reviewed. The meanings and role of various grade criteria and their economic basis for determination in uranium exploration, mining and sorting are discussed and the author's ideas are given

Mercury isotope fractionation during ore retorting in the Almadén mining district, Spain

Science.gov (United States)

Gray, John E.; Pribil, Michael J.; Higueras, Pablo L.

2013-01-01

Almadén, Spain, is the world's largest mercury (Hg) mining district, which has produced over 250,000 metric tons of Hg representing about 30% of the historical Hg produced worldwide. The objective of this study was to measure Hg isotopic compositions of cinnabar ore, mine waste calcine (retorted ore), elemental Hg (Hg0(L)), and elemental Hg gas (Hg0(g)), to evaluate potential Hg isotopic fractionation. Almadén cinnabar ore δ202Hg varied from − 0.92 to 0.15‰ (mean of − 0.56‰, σ = 0.35‰, n = 7), whereas calcine was isotopically heavier and δ202Hg ranged from − 0.03‰ to 1.01‰ (mean of 0.43‰, σ = 0.44‰, n = 8). The average δ202Hg enrichment of 0.99‰ between cinnabar ore and calcines generated during ore retorting indicated Hg isotopic mass dependent fractionation (MDF). Mass independent fractionation (MIF) was not observed in any of the samples in this study. Laboratory retorting experiments of cinnabar also were carried out to evaluate Hg isotopic fractionation of products generated during retorting such as calcine, Hg0(L), and Hg0(g). Calcine and Hg0(L) generated during these retorting experiments showed an enrichment in δ202Hg of as much as 1.90‰ and 0.67‰, respectively, compared to the original cinnabar ore. The δ202Hg for Hg0(g) generated during the retorting experiments was as much as 1.16‰ isotopically lighter compared to cinnabar, thus, when cinnabar ore was roasted, the resultant calcines formed were isotopically heavier, whereas the Hg0(g) generated was isotopically lighter in Hg isotopes.

The non-isothermal kinetics of decomposition of manganese carbonate ore

Directory of Open Access Journals (Sweden)

Kenan Yıldız

2012-06-01

Full Text Available The non-isothermal kinetics of decomposition of manganese carbonate ore from Denizli – Tavas region was studied. The ore decomposed according to a serie of reaction, MnCO3 ;#8594;(400-600°C MnO2 ;#8594;(;600 Mn2O3. By using of Kissenger equation, the activation energies for the decomposition of MnCO3 to MnO2 and the transformation of MnO2 to Mn2O3 were calculated as 185,7 kJ/mol and 217,3 kJ/mol, respectively.

Investigation of ore processing to recover uranium concentrate from sandstone of Pa Lua area on scale of 2 tons of ore per batch

International Nuclear Information System (INIS)

Cao Hung Thai; Dinh Manh Thang; Tran Van Son; Le Quang Thai; Bui Dang Hanh; Hoang Bich Ngoc; Nguyen Hong Ha; Phung Vu Phong; Nguyen Khac Tuan

2003-01-01

Based on the laboratory results, a system for testing on scale of 2 tons uranium ore per batch including following parts was established: equipment for crushing and grinding, equipment for acid leaching, equipment for impurity precipitation and filtration and drying. the results of testing by 2 tons ore per batch scale shown that uranium recovery in the leach circuit were achieved of at least 90% under following conditions: The supplying rate of leach agent 50-701/m 2 .h, sandstone is mixed or incubated with acid before the percolation. About 23 kg filter cake per m 3 solution were disposed as tailings. Flocculants N101, A101 (TOAGOSEL, Japan) were used for improvement of filtration and washing capacity of impurity precipitation. Uranium peroxide was precipitated with addition of hydrogen peroxide. The underflow solids were filtered and calcined. The product contained min. 76% U 3 O 8 . The water recycle was successfully tested. That results in minimization of water addition to only 0.3m 3 /ton of ore. Experimental results on 2 tons scale showed that the proposed processing flow sheet using direct precipitation can meet all environmental and technical objectives. (CHT)

Thorium content of a mineral ore from Morro do Ferro by fission track technique

International Nuclear Information System (INIS)

Oliveira, C.A.N. de.

1980-10-01

The feasibility to determine thorium concentrations by fission track technique in samples of mineral ore has been demonstrated. The literature registers only the application of the fission track technique to mineral ore in the case where the fissionable element is uranium. The technique was applied to determine the thorium concentration of an ore sample from Morro do Ferro, taking advantage of the high thorium to uranium ratio in that mineral. The sample analysed presented a thorium concentration of 2467 +- 400 mg Th/Kg ore. The so called wet method was adopted by using the Bayer made Makrofol KG 10μm thick, as the detector foil, immersed in the thorium solution. The technique is also useful to determine thorium concentrations in environmental samples because of the following aspects: high sensitivity; fast chemical separation of interfering elements; low cost; and operational simplicity. (Author) [pt

Beneficiation and agglomeration of manganese ore fines (an area so important and yet so ignored)

Science.gov (United States)

Sane, R.

2018-01-01

Unpredictable changes in demand and prices varying from very attractive to depressing levels have thrown all Manganese ore mines out of normal operating gear. The supply has to be in time-bound fashion, of dependable quality and continuous. With setting-up of numerous small units and with existing ferro-alloy units, ore supply has become extremely sensitive issue. Due to unpredictable swing in price of Mn ore lumps, furnace operators found it economic and convenient to use fines, even at great risks to furnace equipment and operating persons and therefore risks & damages were conveniently & comfortably ignored. Beneficiation Cost(Operating) approx. - (ferruginous ore) - Roast reduction followed by magnetic separation route-particulars - Water 20/-, Power 490/-, Coal fines-675/-, OH-250/-totaling to Rs.1435/T. (Figures are based on actual data from investigations on Orissa & Karnataka sector ores). Feed Grade Mn- 28 to 32 %, Fe - 14 to 25 %, Concentrate (Beneficiated ore fines)- - Mn- 45 to 48 %, Fe - 6 to 8 %., Recovery - 35 %, Price of 28-30 % Mn ore fines = Rs. 2400/T, Cost of Concentrated fines (45/48% Mn grade) = Rs. 8300/T, Price of 47-48 % Mn Lumpy ore = Rs.11,000/T. Sintering Cost (Operating) - Approx-Rs.1195=00/T Sinter. Therefore cost of Sinter produced from beneficiated concentrate is 9130+1195 = Rs. 10325. The difference in cost of 48%Mn ore Lumps & 48%Mn sintered concentrate = 11000-10325 = Rs.675/T. The main purpose of this paper is to show that establishment of beneficiation unit & Sintering unit is economically feasible. There are many misconcepts, still prevailing, about use of Mn ore sinters. Few of the main misconcepts are- 1)Sinters bring no benefit - technical or economical.2) Sinters are very friable and disintegrate easily into high fines during handling/transportation. 3) Fines below 100 mesh cannot be sintered. 4) Silica increases to high level during sintering, resulting in to high slag volume thereby higher power consumption. All are false

Method of gradual acid leaching of uranium ores of silicate and aluminosilicate nature

International Nuclear Information System (INIS)

Bosina, B.; Krepelka, J.; Urban, P.; Kropacek, J.; Stransky, J.

1987-01-01

Leaching uranium ore pulp is divided into two stages. The first stage takes place without any addition of a leaching agent at elevated pressure and temperature. In the second stage, sulfuric acid is added to the pulp (50 to 1000 kg per tonne of ore) or an oxidation agent. Leaching then proceeds according to routine procedures. The procedure is used to advantage for silicate or aluminosilicate ores which contain uranium minerals which are difficult to leach, pyrite and reducing substances. The two stage leaching allows to use the technology of pressure leaching, reduces consumption of sulfuric acid and oxidation agents and still achieves the required reduction oxidation potential. (E.S.)

Age of uranium ores at Ranger and Jabiluka unconformity vein deposits, Northern Territory, Australia

International Nuclear Information System (INIS)

Ludwig, K.R.; Grauch, R.I.; Nutt, C.J.; Frishman, D.; Nash, J.T.; Simmons, K.R.

1985-01-01

The Ranger and Jabiluka uranium deposits are the largest in the Alligator Rivers Uranium Field (ARUF), which contains at least 20% of the world's low-cost uranium reserves. Ore occurs in early Proterozoic metasediments, below an unconformity with sandstones of the 1.65 Ga Kombolgie Formation. This study uses U-Pb isotope data from over 60 whole-rock drill core samples that contained a variety of mineral assemblages and textures. Data for Ranger samples indicate a well-defined age of 1.74 +/-.02 Ga. This 1.74 Ga age is distinctly pre-Kombolgie, so the Ranger deposit cannot have been formed by processes requiring its presence. This Ranger age is consistent, however, with mineralization related to heating associated with either the emplacement of early post-metamorphic granites, or possibly with intrusion of the nearby Oenpelli Dolerite. In contrast, data for the least-altered Jabiluka ores yield a concordia-intercept age of 1.44 +/-.02 Ga--significantly younger than the Ranger age, and also younger than the Komobolgie. This age may correspond to a regional thermal event, as indicated both by mafic dikes of roughly this age and a zircon lower-intercept age from a nearby granite-gneiss. Thus, together with the well-defined ∼900 Ma age of ores at the Nabarlek deposit, there are at least 3 distinct periods of major U-mineralization in the ARUF. Data for both Ranger and Jabiluka indicate the same, profound isotopic disturbance at some time in the interval of 0.4-0.6 Ga. Possibly this time corresponds to the development of basins and associated basalt flows to the W and SW, a suggested by Crick et. al. (1980)

Geodynamic condition of formation of favorable structural positions for ore-grade gold placement in auminzatau-beltau ore area (the central kyzyl kum, western uzbekistan)

Science.gov (United States)

Janibekov, Bobir Omonovich; Turapov, M. K.

2017-09-01

Work is directed on studying of a geodynamic condition under which the structural positions controlling process of endogenous ore formation were formed. It is shown that explosive region tectonics under the influence of regional tectonic efforts formed structural elements (positions) which controlled formation of gold deposits. It is recognized that structural positions are defined by variety of systems of disjunctive dislocation and their relationship among themselves. Formation of favorable positions depends as well on morphology of ore controlling structures, on degree of their tectonic activity and spatial situation in relation to the direction of tectonic (geodynamic) efforts.

Analysis of copper-nickel ores by gamma-gamma method in ore enrichment works

International Nuclear Information System (INIS)

Bol'shakov, A.Yu.; Tovstenko, Yu.G.; Chinskij, E.B.; Eliseev, G.I.

1973-01-01

The paper presents experimental data on continuous gamma-gamma assay of copper-nickel ores on conveyor belts and of dry discrete samples of classifier overflow at the enrichment plants of the Pechenganikel' group. The relative errors are given of the results of comparison of two-hour rapid analyses and shift and 24-hour chemical analyses of classifier overflow samples with the figures for gamma-gamma assay. The factors affecting the accuracy of the latter technique are elucidated. Practical recommendations are given on the use of this technique at the above enrichment plants. (author)

Radioisotope devices at Novo-Krivorozhskij-ore-enrichment plant

International Nuclear Information System (INIS)

Levitskij, V.Ya.; Kucher, V.G.; Ministerstvo Chernoj Metallurgii Ukrainskoj SSR, Dnepropetrovsk, Bazovaya Opytno-Konstruktorskaya Izotopnaya lab.)

1975-01-01

Use of the ''Ferrite'' analyzers, AZhR and PAZh-1 and the GR-7 gamma relay in different engineering areas of the Novo-Krivorozh ore-enrichment plant is evaluated. The ''Ferrite'' radioisotopic analyzer was designed for rapid roentgeno-radiometric determination of the total iron and iron group element contents in powdered samples of ores and products of their treatment. From the density of the flux of the characteristic radiation it is possible to determine quantitatively the content of the element of interest in the analyzed material. The radioisotpic analyzer AZhR-1 is distinguished by its high efficiency in the analysis for total iron on products of processing of iron ore raw materials. The use of this apparatus allows complete replacement of the chemical method for rapid analysis of concentrates by the roentgeno-radiometric method, which decreases the total analytical work on determination of total iron and speeds up output of information on concentrate quality. The radioisotopic gamma analyzer PAZh-1 is designed for automatic and either continuous or discrete measurement of the total iron content in iron ore materials ground to 50 mm, carried on a conveyor, without selection or preparation of the samples for analysis. The analyzer operates on the principle of measuring the average frequency of impingement on a detector of gamma quanta back-scattered by the analyzed material. This frequency is determined by the percentage content of total iron in the material. The apparatus operates continuously. The mean square deviation of the apparatus values from chemical data is 0.93% Fesub(total). Use of the apparatus greatly increases the operativeness of the control and decreases the laboriousness of raw material sampling in an engineering stream. The radioisotopic data units GR-7 are designed for control of the level of materials in hoppers for recovery and burning of agglomerates. Use of this apparatus showed its great advantage over data units of other types

Phosphate ore beneficiation via determination of phosphorus-to-silica ratios by Laser Induced Breakdown Spectroscopy

International Nuclear Information System (INIS)

Asimellis, George; Giannoudakos, Aggelos; Kompitsas, Michael

2006-01-01

We report development and application of an in-situ applicable method to determine phosphate ore rock quality based on Laser-Induced Breakdown Spectroscopy (LIBS). This is an economically viable method for real-time evaluation of ore phosphate rocks in order to separate high-silica pebbles prior to deep beneficiation. This is achieved by monitoring relative emission line intensities from key probe elements via single laser ablation shots: the ratio of the phosphorous to silica line intensities (P/Si ratio) provides a simple and reliable indicator of ore rock quality. This is a unique LIBS application where no other current analytical spectroscopic method (ICP or XRF) can be applied. Method development is discussed, and results with actual ore samples are presented

Research of geological technologic condition in laboratory about the ore of 501 deposits

International Nuclear Information System (INIS)

Ma Guoxiang; Yu Baoli; Gao Yuyou; Li Changhua

2009-01-01

501 deposits of uranium ore grade is 0.052%. The radio of U +6 /U 4+ is 1.7-4.6. there is less content of sarbonate, such as sulfide and organic matter which disservice baptist uranium geological process, and the uranium and oxygen with a high level in the water of seam. The content of [HCO 3 ] - is lower. By conducting the static leaching test, the important technical parameters of uranium ore extraction are determined: with 7.91 g/L H 2 SO 4 , to soak uranium ore which the grade is between 0.007% and 0.216% for 48 hours, the uranium extraction rate of 64.69-99.17%, and extract uranium concentration 9.51-427.6 mg/L; the formula of infusion solution is obtained by using percolation leaching test: 6-8 g/L H 2 SO 4 , the rate of uranium extraction is 95.71%-96.33%, an average of leaching solution uranium concentration of 88.33-111.32 mg/L, leaching liquid-solid ratio of 4.46-5.66, ore tons of sulfuric acid consumption to 27.58-29.83 kg/t, extraction of uranium 1 kg of sulfuric acid consumption to 55.17-60.06 kg. That indicate the geological technologic conditions which the leaching of uranium ore deposits is better. (authors)

Work Index and Grinding Energy Assessment of Dilband Iron Ore, Pakistan

Directory of Open Access Journals (Sweden)

Muhammad Ishaque Abro

2011-01-01

Full Text Available Importance of comminution in mineral processing sector is highly acknowledged from energy perspective. In present study an attempt was made to understand the comminuting behavior of Dilband iron ore and to compute the grinding energy requirement for production of ultrafine particles up to mesh of liberation. In this regard standard grindability tests developed by the Chair of Mineral Processing Leoben Austria was used for calculating work index of Dilband iron ore. The grinding tests were conducted in rod and ball mills. The work index value of two feed size fractions with 80% passing at 3800?m and 5200?m was noted to be 11.85 kwh/t and 9.3 kwh/ton respectively. Ball mill grinding test indicates that dry grinding in open circuit is not efficient and consumes more energy of 88.48kwh/t of ore for grinding 1000/40?m to 80% <40?m size.

Rirang Uranium Ore Processing System Design: Agitated Digester

International Nuclear Information System (INIS)

Erni, R.A.; Susilaningtyas

1996-01-01

A closed tank digester equipped with a pitched blades turbine agitator has been designed to facilities Rirang uranium ore dissolution using concentrated sulphuric acid at high temperature. The digester was designed to accommodate the digestion of 6 kg of-65 mesh ore at 200 o C, acid resistant material (SS-3 16). It has the dimension of 33 cm high, 22 cm diameter, and elliptical bottom and height of 4 cm. Moreover, the dimension of the 4 blades agitator is as follows: 8 cm long, 1,6 cm blades width. The distance between the blades and digester required 0, 007 Hp for a 500 rpm agitation speed and + 24. 103 kcal energy equipment for heating. Digestion experiment using the agitated digester yielded data that are in good agreement with laboratory scale experiment

Effect of moisture content on the flowability of crushed ores

Science.gov (United States)

Cabrejos, Francisco

2017-06-01

In many mining and industrial processes where large quantities of non-degrading bulk materials such as crushed ores are handled, silos, hoppers, stockpiles and chutes are widely used because they are economical and reliable (if properly designed and operated). However, they are not free of trouble and may experience flow problems such as arching, ratholing, erratic flow, limited storage capacity, limited discharge flow rate, caking, segregation and/or flooding. Moisture content and fine particles significantly affect the flowability of most ores, increasing their cohesive strength and turning them more prone to these problems. The purpose of this article is to highlight a proven, scientific method that can be utilized to ensure reliable storage, flow and discharge of bulk solids in these equipment based on Jenike's flow-of-solids theory and laboratory testing. Knowledge of the flow properties of the material handled provides a design basis to ensure mass flow, avoid arching and prevent the formation of "ratholes". The effect of an increase in water content of the ore is discussed with experimental results.

Effect of moisture content on the flowability of crushed ores

Directory of Open Access Journals (Sweden)

Cabrejos Francisco

2017-01-01

Full Text Available In many mining and industrial processes where large quantities of non-degrading bulk materials such as crushed ores are handled, silos, hoppers, stockpiles and chutes are widely used because they are economical and reliable (if properly designed and operated. However, they are not free of trouble and may experience flow problems such as arching, ratholing, erratic flow, limited storage capacity, limited discharge flow rate, caking, segregation and/or flooding. Moisture content and fine particles significantly affect the flowability of most ores, increasing their cohesive strength and turning them more prone to these problems. The purpose of this article is to highlight a proven, scientific method that can be utilized to ensure reliable storage, flow and discharge of bulk solids in these equipment based on Jenike’s flow-of-solids theory and laboratory testing. Knowledge of the flow properties of the material handled provides a design basis to ensure mass flow, avoid arching and prevent the formation of “ratholes”. The effect of an increase in water content of the ore is discussed with experimental results.

Flotation of uraniferous phosphorus ore from Itataia

International Nuclear Information System (INIS)

Aquino, J.A. de

1984-01-01

Flotation conditions, in laboratory and pilot scale, were established in a sample of Itataia uraniferous phosphorus ore which was basically constitute of apatite and calcite. The system of reagents-tall oil, collamil and sodium silicate-was studied in rougher, scavenger and cleaner stage. (M.A.C.) [pt

Mutualism between autotrophic and heterophic bacteria in leaching of low grade ores

International Nuclear Information System (INIS)

Khalid, Z.M.; Naeveke, R.

1991-01-01

During solubilization processes of low grade sulphidic ores, the auto trophic bacteria oxidize reduced sulphur compounds and ferrous iron to sulphates and ferric iron respectively. The ore leaching bio topes are not only colonized by auto trophic bacteria (Thiobacillus spp., Leptospirillum ferro oxidans and sulfolobus sp.) but the heterotrophic microorganisms, including bacteria and fungi of various species are also found in these habitats. The autotrophs, in addition to energy metabolism, also produce organic compounds which in excess amount inhibit their growth. Through the utilization of such compounds and also through the production of carbon dioxide and ammonia, these heterotorphs can help bio leaching processes. Effect of one of the heterotrophs; methylobacterium sp., a nitrogen scavenger, found in as association with the thio bacilli in one of the leaching bio tope in Germany was studied in leaching of a carbonate bearing complex (containing copper, iron, zinc and lead) sulphidic ore, in shake flask studies. T. ferro oxidans (Strain F-40) reported to be non nitrogen fixer and strain F-41, a nitrogen fixing thiobacillus were studied for leachability behaviour alone and in combination with T. thio oxidans (lacking nitrogen fixing ability) using media with and without added ammonium nitrogen. In addition the effect of methylobacterium sp. (alt-25) was also tested with the afore mentioned combinations. Nitrogen fixation by T. ferro oxidans did not suffice the nitrogen requirement and the leaching system in laboratory needed addition of nitrogen. The heterotrophic nitrogen scavenger also did not have a positive influence in nitrogen limited system. In case where ammonium nitrogen was also provided in the media, this heterotroph had a negative in own growth and leaving lesser amount available for thio bacilli. This high amount of acid is a limiting factor in bio leaching of high carbonate uranium ores. Uranium ore ecosystems have also been found to contain

Dose calculations for intakes of ore dust

International Nuclear Information System (INIS)

O'Brien, R.S.

1998-08-01

This report describes a methodology for calculating the committed effective dose for mixtures of radionuclides, such as those which occur in natural radioactive ores and dusts. The formulae are derived from first principles, with the use of reasonable assumptions concerning the nature and behaviour of the radionuclide mixtures. The calculations are complicated because these 'ores' contain a range of particle sizes, have different degrees of solubility in blood and other body fluids, and also have different biokinetic clearance characteristics from the organs and tissues in the body. The naturally occurring radionuclides also tend to occur in series, i.e. one is produced by the radioactive decay of another 'parent' radionuclide. The formulae derived here can be used, in conjunction with a model such as LUDEP, for calculating total dose resulting from inhalation and/or ingestion of a mixture of radionuclides, and also for deriving annual limits on intake and derived air concentrations for these mixtures

Coal-oil gold agglomeration assisted flotation to recover gold from refractory ore

Science.gov (United States)

Otsuki, A.; Yue, C.

2017-07-01

This study aimed to investigate the applicability of coal-oil gold agglomeration (CGA) assisted flotation to recover gold from a refractory ore. The ore with the grade of 2-5 g/t was tested with the CGA-flotation process in six different size fractions from 38 to 300 urn using different collector types and dosages. In addition, the flotation without CGA was performed under the same condition for comparison. The results showed that the higher gold grade and recovery were achieved by applying the CGA-flotation, compared with the flotation without CGA. More than 20-60 times grade increase from the head grade was obtained with CGA-flotation. The elemental analysis of gold and sulphur explained their relationship with gold recovery. The results well indicated the applicability of CGA to upgrade the refractory gold ore.

Mineralogical test as a preliminary step for metallurgical proses of Kalan ores

International Nuclear Information System (INIS)

Affandi, K.

1998-01-01

Mineralogical tests as a preliminary step for hydrometallurgy of Kalan ores, including Eko Remaja and Rirang have been carried out to identify the elements and minerals content which affect the metallurgical process, especially the leaching and purification of uranium. Mineralogical tests have been done by means of radioactive and radioluxugraph tests to identify radioactive minerals; thin specimen analysis, Scanning Electron Microscopy (SEM) to identify elements and morphology, EPMA to analyse qualitatively the elements, X-ray Diffractometer (XRD) to identify of minerals content; and X-ray Fluorescence (XRF) and chemical analyses to determine total elements qualitatively and quantitatively. The experimental results show that the Eko Remaja ores contain uraninite and brannerite, iron and titan oxides, sulfides, phosphates and silicates minerals, while the Rirang ores contain uraninite, monazite and molybdenite

Neutron activation probe for measuring the presence of uranium in ore bodies

International Nuclear Information System (INIS)

Goldstein, N.P.; Smith, R.C.

1979-01-01

A neutron activation proble comprises a pulsed neutron source in series with a plurality of delayed neutron detectors for measuring radioactivity in a well borehole together with a NaI (Tl) counter for measuring the high energy 2.62 MeV gamma line from thorium. The neutron source emits neutrons which produce fission in uranium and thorium in the ore body and the delayed neutron detectors measure the delayed neutrons produced from such fission while the NaI (Tl) counter measures the 2.62 MeV gamma line from the undisturbed thorium in the ore body. The signal from the NaI (Tl) counter is processed and subtracted from the signal from the delayed neutron detectors with the result being indicative of the amount of uranium present in the ore body

Geology and ore deposits of the Pioche district, Nevada

Science.gov (United States)

Westgate, L.G.; Knopf, Adolph

1932-01-01

LOCATION AND SURFACE FEATURES The Bristol Range, Highland, and Ely Range quadrangles make up the larger part of a. rectangular area 35 miles north and south by 24 miles east and west, which lies 19 miles west of the Nevada-Utah line and about 250 miles southwest of Salt Lake City. The district lies within the Great Basin, a semiarid region of alternating mountain ranges and intermontane plains floored largely by outwash from the mountains. The plain, which slopes away from the ranges, stands between 4,700 and 6,000 feet above the sea. The Bristol and Highland Ranges, which are separated only by a low gap, form an almost continuous north-south range that rises about 2,500 feet above the highest part of the surrounding plain, to general altitudes of 8,000 to 9,000 feet, though the highest point, Highland Peak, reaches 9,395 feet. A lower range, the Ely Range, with a northwesterly trend, lies farther east and nearly in touch with the Bristol-Highland Range. The town of Pioche lies midway on the. eastern foot of the Ely Range. ROOKS OF THE PIOOHB REGION The rocks of the ranges are Paleozoic sediments, Tertiary (?) lavas and intrusive rocks, and Pliocene (?) tuffs. The Paleozoic sediments have a total thickness of nearly 18,000 feet. Over 8,000 feet of the Cambrian has been measured without reaching its base. The lowest Cambrian formation is a quartzite, of which only the upper 1,500 feet is exposed, and this is followed by 1,200 feet of shale, 400 feet of limestone, aoid 150 feet of shale. Above this second shale the upper three-fourths of the Cambrian consists of limestone and dolomitic limestone. It is in the quartzite and in the limestone interbedded in and bounding the shales that the main ore bodies of the district have been found. Above the Cambrian comes 1,795 feet of Ordovician limestone, with some interbedded dolomite and with a 50-foot quartzite a, third of the way down from the top; 75 feet of Silurian dolomite; 3,000 feet of Middle Devonian dolomite with

Grade control and the determination of ore reserves at a low-grade uranium mine

International Nuclear Information System (INIS)

Reid, J.A.F.; Robertson, B.

1982-01-01

In 1966 an intensive exploration programme was conducted by Rio Tinto South Africa Ltd, involving airborne and ground radiometric surveys, percussion and diamond drilling, and pilot-plant tests. This investigation established the presence of a large deposit of low-grade uranium that could be mined on a large scale by open-pitting. Soon after production started in June 1974, it was realized that the original presentation of the ore reserves did not give a true reflection of the orebody. A comparison between the estimates and the ore mined from reserve blocks over the period 1975 to 1977 showed that the reserve grades were over-optimistic. In 1977 Rio Tinto Zinc Consultants were commissioned to re-evaluate the ore reserves from exploration diamond-drill data with the help of The Centre de Geostatistique at Fontainebleau, France. A new global reserve using disjunctive kriging techniques was developed, and is now the long-term reserve used for planning purposes at the Roessing Mine. For short-term planning, ore-reserve data are replaced by information from an intermediate drilling programme and blast-hole assays if these are available. A computerized short-term planning system has been established that reconciles the ore mined against the reserve blocks, as well as a system by which composited blast-hole assays are analysed for grade-control purposes. Owing to the complexity of the orebody, additional monitoring is achieved by the scanning of each truckload of ore with a group of scintillation crystal heads that evaluate the material mined

Development and inculcation of new methods in the field of exploring, extraction and reprocessing of uranium raw materials

International Nuclear Information System (INIS)

Smirnov, Yu.V.; Efimova, Z.I.; Skorovarov, D.I.; Ivanov, G.F.

1979-01-01

The situation is briefly overviewed in the field of exploration, prospecting, extraction and processing of uranium raw material and industrial introduction of the recently developed methods. The method of underground leaching, including that from deep-seated deposits, is gaining wide acceptance. Of high importance is the industrial introduction of such promising processes as bacterial leaching, continuous column-sorption with a pseudo-luquefied sorbent layer, direct production of UF 6 in an ore-processing factory. Active works are under way now in the field of multi-purpose utilization of uranium ore. New methods are industrially introduced for the extraction of associated uranium from phosphoric acid solutions, copper ore, sea water

DH-1a: a certified uranium-thorium reference ore

International Nuclear Information System (INIS)

Steger, H.F.; Bowman, W.S.; Zechanowitsch, G.

1981-09-01

A 122-kg sample of uranium-thorium ore, DH-1a, from Elliot Lake, Ontario, was prepared as a compositional reference material to replace the similar certified ore, DH-1. DH-1a was ground to minus 74μm, blended in one lot, and bottled in 200 g units. The homogeneity of DH-1a with respect to uranium was confirmed using the volumetric umpire method. The recommended value for uranium is based on the data from the confirmation of homogeneity. For thorium, twelve laboratories provided results in a free choice analytical program. A statistical analysis of the data gave a recommended value of 0.263 percent for uranium and 0.091 percent for thorium

Characterization of Sumbawa manganese ore and recovery of manganese sulfate as leaching products

Science.gov (United States)

Kusumaningrum, Retno; Rahmani, Siti Astari; Widayatno, Wahyu Bambang; Wismogroho, Agus Sukarto; Nugroho, Dwi Wahyu; Maulana, Syahrizal; Rochman, Nurul Taufiqu; Amal, M. Ikhlasul

2018-05-01

The aims of this research were to study the leaching process of manganese ore which originated from Sumbawa, Indonesia and its characterization. A high grade Indonesian manganese ore from Sumbawa, West of Nusa Tenggara was characterized by X-Ray Fluorescence (XRF). The result showed composition of 78.8 % Mn, 17.77% Fe and the rest were trace elements such as Si, Co, Ti, Zn, V and Zr contents. X-Ray Diffraction analysis showed that the manganese ore was consisted of pyrolusite (MnO2), rhodonite (MnSiO3), rhodochrosite (MnCO3) and hematite (Fe2O3). Manganese ore was also analyzed by thermal analysis to observe their thermal decomposition character. In this study, sulphuric acid (H2SO4, 6 M) was deployed as leaching agent. The leaching process was performed at 90 °C for two hours with the addition of NH4OH to control pH. Recovery percentage of leaching process yielded of 87 % Mn extracted. The crystallization process result at heating temperature of 200 °C was confirmed by XRD as manganese sulfate.

Research on single-chip microcomputer controlled rotating magnetic field mineralization model

Science.gov (United States)

Li, Yang; Qi, Yulin; Yang, Junxiao; Li, Na

2017-08-01

As one of the method of selecting ore, the magnetic separation method has the advantages of stable operation, simple process flow, high beneficiation efficiency and no chemical environment pollution. But the existing magnetic separator are more mechanical, the operation is not flexible, and can not change the magnetic field parameters according to the precision of the ore needed. Based on the existing magnetic separator is mechanical, the rotating magnetic field can be used for single chip microcomputer control as the research object, design and trial a rotating magnetic field processing prototype, and through the single-chip PWM pulse output to control the rotation of the magnetic field strength and rotating magnetic field speed. This method of using pure software to generate PWM pulse to control rotary magnetic field beneficiation, with higher flexibility, accuracy and lower cost, can give full play to the performance of single-chip.

Understanding Lateritic Ore Agglomeration Behaviour as a ...

African Journals Online (AJOL)

Processing such ores through cost-competitive heap (4-10 m high) leaching as an alternative, requires successful agglomeration of the feed into robust and porous granules. To date, produc-ing of granules with desirable attributes poses a major geotechnical challenge to industry. In the present work, we investigate ...

Oxidizing attack process of uranium ore by a carbonated liquor

International Nuclear Information System (INIS)

Maurel, Pierre; Nicolas, Francois.

1981-01-01

A continuous process for digesting a uraniferous ore by oxidation with a recycling aqueous liquor containing alkaline carbonates and bicarbonates in solution as well as uranium in a concentration close to its solubility limit at digestion temperature, and of recuperation of the precipitated uranium within the solid phase remaining after digestion. The digestion is carried out by spraying oxygen into the hot reactional medium in order not only to permit oxidation of the uranium and its solubilization but also to ensure that the sulphides of impurities and organic substances present in the ore are oxidized [fr

The Use of Infrared Spectroscopy to Determine the Quality of Carbonate-Rich Diatomite Ores

Directory of Open Access Journals (Sweden)

Adriana Guatame-Garcia

2018-03-01

Full Text Available Diatomite, a rock formed by the accumulation of opaline diatom frustules, is a preferred raw material for the manufacturing of filters. Its uniqueness relies on the high porosity and inertness of the frustules. The presence of carbonates in some diatomite ores hinders these properties. The purpose of this study was to identify the type of carbonates and their association with the ore in a diatomite deposit, and to assess the suitability of determining the quality of the ore using techniques with potential for in-pit implementation. For this, run-of-mine samples were analysed using environmental scanning electron microscopy (ESEM and infrared spectroscopy. The ESEM images showed that carbonate is present as cement and laminae. The infrared data revealed that the carbonate minerals correspond to aragonite and calcite, and that their occurrence is linked to the total amount of carbonate in the sample. By using a portable spectral instrument that uses diffuse reflectance, it was possible to classify the spectra of the ore samples based on the carbonate content. These results indicate that infrared technology could be used on-site for determining the quality of the ore, thus providing relevant information to assist the optimisation of mining and beneficiation activities.

Preliminary reduction of chromium ore using Si sludge generated in silicon wafer manufacturing process

Directory of Open Access Journals (Sweden)

Jung W.-G.

2018-01-01

Full Text Available In order to promote the recycling of by-product from Si wafer manufacturing process and to develop environment-friend and low cost process for ferrochrome alloy production, a basic study was performed on the preliminary reduction reaction between chromium ore and the Si sludge, comprised of SiC and Si particles, which is recovered from the Si wafer manufacturing process for the semiconductor and solar cell industries. Pellets were first made by mixing chromium ore, Si sludge, and some binders in the designed mixing ratios and were then treated at different temperatures in the 1116°C–1388°C range in an ambient atmosphere. Cordierite and SiO2 were confirmed to be formed in the products after the reduction. Additionally, metal particles were observed in the product with Fe, Cr, and Si components. It is found that temperatures above 1300°C are necessary for the reduction of the chromium ore by the Si sludge. The reduction ratio for Fe was evaluated quantitatively for our experimental conditions, and the proper mixing ratio was suggested for the pre-reduction of the chromium ore by the Si sludge. This study provides basic information for the production of ferrochrome alloys on the pre-reduction of chromium ore using Si sludge.

chemical and mineralogical characterization of lateritic iron ore

African Journals Online (AJOL)

DJFLEX

2010-04-22

Apr 22, 2010 ... The laterite iron ore deposit at Auchi, Edo State, Nigeria was studied chemically and mineralogically. The results of the chemical ... SAMPLE PREPARATION. The samples .... 2µm) and were subjected to X-ray diffraction using.

Disintegration of Copper Ores by Electric Pulses / Rozdrobienie Rudy Miedzi Impulsami Elektrycznymi

Directory of Open Access Journals (Sweden)

Kurytnik I.

2015-12-01

Full Text Available The article is concerned with methods of ragging and grinding of copper ore. The proposed electric pulse technology is one of the energetically favorable methods of ragging and grinding of natural minerals and anthropogenic raw materials. This paper presents optimal parameters in processing of the product. The results obtained by grinding of copper ore using the offered technology may be used under industrial conditions in the future.

Nuclear-geophysical methods as a basis of progressive technology of ore quality control in mining industry

International Nuclear Information System (INIS)

Mejer, V.A.

1976-01-01

The significance of nuclear physics methods in the mining industry is demonstrated using examples of applying the X-ray diffraction method to the delimitation of lead-zinc and tin ores in exploratory wells, faces of mine workings and to a quick estimation of metal contents in hacked-off rocks and market payable ore. Their implementation at all stages of the exploration and development of deposits would improve the extraction of ores and reduce losses of the raw material during technological treatment. Owing to the rapidity and operativeness of control over the quality of ores at all stages of geological prospecting and mining, nuclear physics methods can provide a basis for technological progress in the mining industry

The flotation of Roşia Poieni copper ore in column machine, with non-polar oils addition

Directory of Open Access Journals (Sweden)

Ciocani V.

2005-11-01

Full Text Available The most important natural resource of copper in Romania is the ore deposit of Roşia Poieni. At present, the utilization of Roşia Poieni poorphyry copper ore is possible by extraction in quarry of the mass ore and mineral processing into a technological flux with modest results for the value of metal recovery in concentrate 70-72 % and an average contents of 16,5 % Cu. Our researches were directed to studies regarding test and utilisation of special procedure of flotation – addition of the non-polar oil – applied to advanced grinding ore with column type machines.