Features of Computerized Procedure System of Shin-Kori unit 5 and 6

Energy Technology Data Exchange (ETDEWEB)

Seong, Nokyu; Jung, Yeonsub; Sung, Chanho [KHNP CRI, Daejeon (Korea, Republic of)

2016-10-15

The Computerized Procedure System (CPS) is one of the Man Machine Interface (MMI) resources of Main Control Room (MCR) of the Advanced Power Reactor 1400 (APR1400). The CPS has been continuously improved since it was installed in Shin-Kori unit 3 and 4. The Korea Hydro Nuclear Power Central Research Institute (KHNP CRI) has found the points of improvement of CPS through CPS centered Human Factors Engineering Verification and Validation (HFE V and V) and Operating Experience Review (OER) of reference power plant. This paper shows the main features of CPS of Shin-Kori 5 and 6 unit. This paper shows the main features of CPS of Shin-Kori 5 and 6. These are some of improvements of CPS. This prototype of CPS currently is implementing in CRI. The respective function can be more detailed after testing the prototype. These features will be applied to Shin-Kori 5 and 6 CPS after HFE V and V.

Notes on breeding sharp-shinned hawks and cooper’s hawks in Barnwell County, South Carolina

Science.gov (United States)

Mark Vukovich; John C. Kilgo

2009-01-01

Breeding records of Accipiter striatus (Sharp-shinned Hawks) in the southeastern US are scattered and isolated. We documented a Sharp-shinned Hawk and Accipiter cooperii (Cooper’s Hawk) nest while conducting a telemetry study on Melanerpes erythrocephalus (Red-headed Woodpeckers) in Barnwell County, SC in 2006 and 2007. We report the first known nest of a Sharp-shinned...

Knock-in/Knock-out (KIKO) vectors for rapid integration of large DNA sequences, including whole metabolic pathways, onto the Escherichia coli chromosome at well-characterised loci.

Science.gov (United States)

Sabri, Suriana; Steen, Jennifer A; Bongers, Mareike; Nielsen, Lars K; Vickers, Claudia E

2013-06-24

Metabolic engineering projects often require integration of multiple genes in order to control the desired phenotype. However, this often requires iterative rounds of engineering because many current insertion approaches are limited by the size of the DNA that can be transferred onto the chromosome. Consequently, construction of highly engineered strains is very time-consuming. A lack of well-characterised insertion loci is also problematic. A series of knock-in/knock-out (KIKO) vectors was constructed for integration of large DNA sequences onto the E. coli chromosome at well-defined loci. The KIKO plasmids target three nonessential genes/operons as insertion sites: arsB (an arsenite transporter); lacZ (β-galactosidase); and rbsA-rbsR (a ribose metabolism operon). Two homologous 'arms' target each insertion locus; insertion is mediated by λ Red recombinase through these arms. Between the arms is a multiple cloning site for the introduction of exogenous sequences and an antibiotic resistance marker (either chloramphenicol or kanamycin) for selection of positive recombinants. The resistance marker can subsequently be removed by flippase-mediated recombination. The insertion cassette is flanked by hairpin loops to isolate it from the effects of external transcription at the integration locus. To characterize each target locus, a xylanase reporter gene (xynA) was integrated onto the chromosomes of E. coli strains W and K-12 using the KIKO vectors. Expression levels varied between loci, with the arsB locus consistently showing the highest level of expression. To demonstrate the simultaneous use of all three loci in one strain, xynA, green fluorescent protein (gfp) and a sucrose catabolic operon (cscAKB) were introduced into lacZ, arsB and rbsAR respectively, and shown to be functional. The KIKO plasmids are a useful tool for efficient integration of large DNA fragments (including multiple genes and pathways) into E. coli. Chromosomal insertion provides stable

Bone lesions from overload: shin splint and stress fracture

International Nuclear Information System (INIS)

Una Gorospe; Jon Andoni; Isla Gallego, Concepcion; Santana Borbones, Aranzazu; Perera Romero, Carmen; Allende Riera, Ana J

2005-01-01

There are many stress injuries in the lower extremities due to exercise, and the case we present is an example of two injuries which may present in children or young adults who train excessively. The patient complains of pain and tightness on exercise. The underlying pathology is probably rupture of insertion fibres of the tibial and soleus (Sharpey's fibres) muscles. Probably, there is also periostitis and myositis. Stress fractures and shin splints are often present at the same time in different stages, and both are typical pathologies due to excessive training. Scintigraphy allows identification and early management of shin splints and stress fractures (au)

Development of Severe Accident Management Strategies for Shin-Kori 3 and 4

International Nuclear Information System (INIS)

Lee, Youngseung; Kim, Hyeongtaek; Shin, Jungmin

2013-01-01

Shin-Kori units 3 and 4 are new reactors under construction as an APR 1400 type reactor. The plants which considered coping with severe accident from design phase are different from other operating plants in view of severe accident management strategies. The purpose of this paper is to establish optimal strategies for Shin-Kori 3 and 4. A scheme for optimized severe accident management was drawn up with the object of achieving core cooling, containment integrity, and decreased release of fission product. Shin-Kori units 3 and 4 are a new reactor and designed to add mitigating systems for coping with severe accident such as ECSBS, PAR, and CFS. Also the plants are reflected as a part of Fukushima followup measures The strategies of SAMG for Shin-Kori 3 and 4 were developed. The strategic approach was based on the concept of defense in depth. Firstly, strategies for core cooling were chosen such as RCS depressurization, injection to SG, injection to RCS, and injection to reactor cavity. Secondly, the plans for containment integrity were developed for controlling pressure and hydrogen in containment. Lastly, reduced release of fission product was considered for protection of the public after containment failure. The achieved strategies meet the needs of effective methods for severe accident management and enhancement of safety

Standardization of spedalized medical care to patients with shin fractures in multifield city hospital

Directory of Open Access Journals (Sweden)

R. M. Tikhilov

2013-01-01

Full Text Available The aim of the investigation was development of science-based recommendations for increasing efficiency of operative treatment of adult patients with shin fractures in multiprofile city hospital. Investigation was made in Saint-Petersburg Alexandrovskiy City Hospital. Clinical material was presented by official hospital reports, individual medical documentation and results of direct survey of patients treated in this hospital in period 1999-2010 years. All patients had follow up treatment in outpatient department of this hospital. Information was completed following federal and local laws. Recommendations for standardization of modern specialized medical care of patients with shin fractures, based on methods of internal fixation, were performed. We took into consideration possibilities of conventional and minimally invasive fixation of closed and open fractures including politrauma injuries. Models of patients with shin fractures depending on method of internal fixation and list of basic diagnostic procedures and treatment were formed. Operations classifier of internal shin fractures fixation was developed. This classifier includes calculation of hospital costs in process of specialized medical care considering actual correction coefficients. Calculation of each surgical procedure component was performed. List and composition of instrument sets and expense materials for such operations were formed. Analisis of organizational, medico-technological, economica aspect and expert evaluation of clinical results of different methods of long bones fractures fixation have provided conceptual approach to treatment standardization. On this base we have developed medico-economical standards of long bones fractures treatment in city multiprofile hospital.

Tibial Stress Injuries: Decisive Diagnosis and Treatment of "Shin Splints."

Science.gov (United States)

Couture, Christopher J.; Karlson, Kristine A.

2002-01-01

Tibial stress injuries, commonly called shin splints, often result when bone remodeling processes adopt inadequately to repetitive stress. Physicians who are caring for athletic patients must have a thorough understanding of this continuum of injuries, including medial tibial stress syndrome and tibial stress fractures, because there are…

Development of Neutronics Model for ShinKori Unit 1 Simulator

Energy Technology Data Exchange (ETDEWEB)

Hong, JinHyuk; Lee, MyeongSoo; Lee, SeungHo; Suh, JungKwan; Hwang, DoHyun [KEPRI, Daejeon (Korea, Republic of)

2008-05-15

ShinKori-Unit 1 and 2 is being built in the Kori site which will be operated at 2815 MWt of thermal core power. The purpose of this paper is to report on the performance of the developed neutronics model of ShinKori Unit 1 and 2. Also this report includes the convenient tool (XS2R5) for processing the large quantity of information received from the DIT/ROCS model and generating cross-sections. The neutronics model is based on the NESTLE code inserted to RELAP5/MOD3 thermal-hydraulics analysis code which was funded as FY-93 LDRD Project 7201 and is running on the commercial simulator environment tool (the 3KeyMaster{sup TM} of the WSC). As some examples for the verification of the developed neutronics model, some figures are provided. The output of the developed neutronics model is in accord with the Preliminary Safety Analysis Report (PSAR) of the reference plant.

Selected examples for safety analysis in VVER-440 type reactors simulated by the coupled ATHLET/KIKO3D code system

International Nuclear Information System (INIS)

Hegyi, Gy.; Kereszturi, A.; Trosztel, I.

2005-01-01

Recently several projects have been initiated in Hungary aiming at the introduction of new fuel type, increased maximum allowed power and economic fuel cycle. The planned upgraded power and parallel application of new fuel type require the renewal of the relevant chapter of the Final Safety Analysis Report (FSAR). One of the main tools used for analyzing transient scenarios initiating by reactivity and power distribution anomalies was the ATHLET/KIKO3D coupled neutron kinetic / thermal-hydraulic code. This paper gives an overview of two analyses, which was prepared in the frame of the revision of Paks FSAR, namely the ''withdrawal of one control rod'' and ''initial phase of main steam line break'' events. (author)

Evaluation of SPACE code for simulation of inadvertent opening of spray valve in Shin Kori unit 1

International Nuclear Information System (INIS)

Kim, Seyun; Youn, Bumsoo

2013-01-01

SPACE code is expected to be applied to the safety analysis for LOCA (Loss of Coolant Accident) and Non-LOCA scenarios. SPACE code solves two-fluid, three-field governing equations and programmed with C++ computer language using object-oriented concepts. To evaluate the analysis capability for the transient phenomena in the actual nuclear power plant, an inadvertent opening of spray valve in startup test phase of Shin Kori unit 1 was simulated with SPACE code. To evaluate the analysis capability for the transient phenomena in the actual nuclear power plant, an inadvertent opening of spray valve in startup test phase of Shin Kori unit 1 was simulated with SPACE code

Treatment efficiency of patients with shin fracture after intraosseous blocked osteosynthesis by using the load dispenser

Directory of Open Access Journals (Sweden)

Yu. V. Sukhin

2017-08-01

Full Text Available The purpose of research: еvaluation of the effectiveness of the device for determining the value of the load on the lower extremity while walking in real time with controlling and signalization of excessive and insufficient load. Materials and methods. Еlaborated and applied device, that allows to determine the load magnitude on the lower extremity in real time, and also to signal about excessive or weak load. The sensory block with the insole and the sensor is located in shoes, under patient's heel, and the main block is fixed on the shin with the help of the strap. Current value of the load on the leg is registered in real time. Received data is recorded in non-volatile memory. The system provides an opportunity to notify patient or doctor by email about the presence of a strong or weak load on the lower extremity, and also about the absence of load for a long period. Results. We used the loading batcher in 38 patients with the shin bones fractures, who were on inpatient treatment at the traumatology and orthopedics center in Odessa in the period from 1.5 to 12 months. The main group included patients, who used the load batcher on the lower extremity in rehabilitation period (transversal fracture of the shin bones diaphysis – 9 patients, oblique fracture – 11 patients. The control group consisted of patients, who didn't use the load batcher (10 patients with oblique fracture of the shin bones in the middle third, 8 patients with transversal fracture of both shin bones in the middle third. As a result of applying the device we succeeded to reduce the fracture fusion period for two weeks and avoid such complications as contracture of joint and fracture non-union. Conclusions. The device allows patients with traumatic consequences reaching the optimal load in rehabilitation period, avoiding excessive load on the lower extremity. The elaboration provides an opportunity to determine the statistics of the load and its transfer to the server

An advanced NSSS integrity monitoring system for Shin-Kori nuclear units 3 and 4

International Nuclear Information System (INIS)

Oh, Y. G.; Kim, H. B.; Galin, S. R.; Kim, S. H.; Lee, S. J.

2009-01-01

The advanced design features of NSSS (Nuclear Steam Supply System) Integrity Monitoring System for Shin-Kori Nuclear Units 3 and 4 are summarized herein. During the overall system design and detailed component design processes, many design improvements have been made for the system. The major design changes are: 1) the application of a common software platform for all subsystems, 2) the implementation of remote access, control and monitoring capabilities, and 3) the equipment redesign and rearrangement that has simplified the system architecture. Changes give an effect on cabinet size, number of cables, cyber-security, graphic user interfaces, and interfaces with other monitoring systems. The system installation and operation for Shin-Kori Nuclear Units 3 and 4 will be more convenient than those for previous Korean nuclear units in view of its remote control capability, automated test functions, improved user interface functions, and much less cabling. (authors)

An Advanced NSSS Integrity Monitoring System for Shin-Kori Nuclear Units 3 and 4

Science.gov (United States)

Oh, Yang Gyun; Galin, Scott R.; Lee, Sang Jeong

2010-12-01

The advanced design features of NSSS (Nuclear Steam Supply System) Integrity Monitoring System for Shin-Kori Nuclear Units 3 and 4 are summarized herein. During the overall system design and detailed component design processes, many design improvements have been made for the system. The major design changes are: 1) the application of a common software platform for all subsystems, 2) the implementation of remote access, control and monitoring capabilities, and 3) the equipment redesign and rearrangement that has simplified the system architecture. Changes give an effect on cabinet size, number of cables, cyber-security, graphic user interfaces, and interfaces with other monitoring systems. The system installation and operation for Shin-Kori Nuclear Units 3 and 4 will be more convenient than those for previous Korean nuclear units in view of its remote control capability, automated test functions, improved user interface functions, and much less cabling.

Silurian to Devonian magmatism, molybdenite mineralization, regional exhumation and brittle strike-slip deformation along the Loch Shin Line, NW Scotland

OpenAIRE

Holdsworth, R.; Dempsey, E.; Selby, D.; Darling, James Richard; Feely, M.; Costanzo, A.; Strachan, Robin A; Waters, P.; Finlay, A.J.

2015-01-01

The Loch Shin Line is a geological–geophysical lineament associated with a zone of mantle-derived appinites, granites and strike-slip faulting that runs NW–SE across the Moine Nappe, northern Scotland. U–Pb zircon and Re–Os molybdenite dating of the Loch Shin and Grudie plutons, which lie immediately SW of the NW–SE Loch Shin–Strath Fleet fault system, yield c. 427–430 Ma ages that overlap within error. They also coincide with previously obtained U–Pb zircon ages for the Rogart pluton, which ...

A study on Requirements of Data Base Translator for APR1400 Computerized Procedure System at Shin-Hanul unit 1 and 2

International Nuclear Information System (INIS)

Seong, Nokyu; Lee, Sungjin

2015-01-01

The CPS is one of the Man Machine Interface (MMI) resources and the CPS can directly display plant graphic objects which are in the Digital Control System (DCS). And the CPS can send a request to DCS to provide DCS screen which is called step support display through DCS link button on a computerized procedure. The procedure writers can insert DCS graphic information to computerized procedure through data base which is provided by CPS Editing System (CPSES). The data base which is provided by CPSES conforms to the naming rule of DCS graphic objects. The naming rule of DCS graphic objects is defined by vendor thus status of DCS graphic objects which are in computerized procedure at Shin-Kori plant cannot be displayed on CPS at Shin-Hanul plant. To use computerized procedure which is written by other plant procedure writer, DCS graphic objects shall be translated by its plant data base. This paper introduces requirements of data base translator to reduce translation and re-inserting graphic objects burden. This paper introduces the requirements of data base translator of CPSES for APR1400 CPS at Shin-Hanul unit 1 and 2. The translator algorithms shall be tested to update data base of CPSES effectively. The prototype of translator is implemented and is being tested using real plant DB. This translator can be applied to Shin- Hanul unit1 and 2 through software V and V

A study on Requirements of Data Base Translator for APR1400 Computerized Procedure System at Shin-Hanul unit 1 and 2

Energy Technology Data Exchange (ETDEWEB)

Seong, Nokyu; Lee, Sungjin [KHNP, Daejeon (Korea, Republic of)

2015-05-15

The CPS is one of the Man Machine Interface (MMI) resources and the CPS can directly display plant graphic objects which are in the Digital Control System (DCS). And the CPS can send a request to DCS to provide DCS screen which is called step support display through DCS link button on a computerized procedure. The procedure writers can insert DCS graphic information to computerized procedure through data base which is provided by CPS Editing System (CPSES). The data base which is provided by CPSES conforms to the naming rule of DCS graphic objects. The naming rule of DCS graphic objects is defined by vendor thus status of DCS graphic objects which are in computerized procedure at Shin-Kori plant cannot be displayed on CPS at Shin-Hanul plant. To use computerized procedure which is written by other plant procedure writer, DCS graphic objects shall be translated by its plant data base. This paper introduces requirements of data base translator to reduce translation and re-inserting graphic objects burden. This paper introduces the requirements of data base translator of CPSES for APR1400 CPS at Shin-Hanul unit 1 and 2. The translator algorithms shall be tested to update data base of CPSES effectively. The prototype of translator is implemented and is being tested using real plant DB. This translator can be applied to Shin- Hanul unit1 and 2 through software V and V.

System and Software Design for the Plant Protection System for Shin-Hanul Nuclear Power Plant Units 1 and 2

International Nuclear Information System (INIS)

Hwang, In Seok; Kim, Young Geul; Choi, Woong Seock; Sohn, Se Do

2015-01-01

The Reactor Protection System(RPS) protects the core fuel design limits and reactor coolant system pressure boundary for Anticipated Operational Occurrences (AOOs), and provides assistance in mitigating the consequences of Postulated Accidents (PAs). The ESFAS sends the initiation signals to Engineered Safety Feature - Component Control System (ESF-CCS) to mitigate consequences of design basis events. The Common Q platform Programmable Logic Controller (PLC) was used for Shin-Wolsung Nuclear Power Plant Units 1 and 2 and Shin-Kori Nuclear Power Plant Units 1, 2, 3 and 4 since Digital Plant Protection System (DPPS) based on Common Q PLC was applied for Ulchin Nuclear Power Plant Units 5 and 6. The PPS for Shin-Hanul Nuclear Power Plant Units 1 and 2 (SHN 1 and 2) was developed using POSAFE-Q PLC for the first time for the PPS. The SHN1 and 2 PPS was delivered to the sites after completion of Man Machine Interface System Integrated System Test (MMIS-IST). The SHN1 and 2 PPS was developed to have the redundancy in each channel and to use the benefits of POSAFE-Q PLC, such as diagnostic and data communication. The PPS application software was developed using ISODE to minimize development time and human errors, and to improve software quality, productivity, and reusability

System and Software Design for the Plant Protection System for Shin-Hanul Nuclear Power Plant Units 1 and 2

Energy Technology Data Exchange (ETDEWEB)

Hwang, In Seok; Kim, Young Geul; Choi, Woong Seock; Sohn, Se Do [KEPCO EnC, Daejeon (Korea, Republic of)

2015-10-15

The Reactor Protection System(RPS) protects the core fuel design limits and reactor coolant system pressure boundary for Anticipated Operational Occurrences (AOOs), and provides assistance in mitigating the consequences of Postulated Accidents (PAs). The ESFAS sends the initiation signals to Engineered Safety Feature - Component Control System (ESF-CCS) to mitigate consequences of design basis events. The Common Q platform Programmable Logic Controller (PLC) was used for Shin-Wolsung Nuclear Power Plant Units 1 and 2 and Shin-Kori Nuclear Power Plant Units 1, 2, 3 and 4 since Digital Plant Protection System (DPPS) based on Common Q PLC was applied for Ulchin Nuclear Power Plant Units 5 and 6. The PPS for Shin-Hanul Nuclear Power Plant Units 1 and 2 (SHN 1 and 2) was developed using POSAFE-Q PLC for the first time for the PPS. The SHN1 and 2 PPS was delivered to the sites after completion of Man Machine Interface System Integrated System Test (MMIS-IST). The SHN1 and 2 PPS was developed to have the redundancy in each channel and to use the benefits of POSAFE-Q PLC, such as diagnostic and data communication. The PPS application software was developed using ISODE to minimize development time and human errors, and to improve software quality, productivity, and reusability.

Establishment of expanded and streamlined pipeline of PITCh knock-in - a web-based design tool for MMEJ-mediated gene knock-in, PITCh designer, and the variations of PITCh, PITCh-TG and PITCh-KIKO.

Science.gov (United States)

Nakamae, Kazuki; Nishimura, Yuki; Takenaga, Mitsumasa; Nakade, Shota; Sakamoto, Naoaki; Ide, Hiroshi; Sakuma, Tetsushi; Yamamoto, Takashi

2017-05-04

The emerging genome editing technology has enabled the creation of gene knock-in cells easily, efficiently, and rapidly, which has dramatically accelerated research in the field of mammalian functional genomics, including in humans. We recently developed a microhomology-mediated end-joining-based gene knock-in method, termed the PITCh system, and presented various examples of its application. Since the PITCh system only requires very short microhomologies (up to 40 bp) and single-guide RNA target sites on the donor vector, the targeting construct can be rapidly prepared compared with the conventional targeting vector for homologous recombination-based knock-in. Here, we established a streamlined pipeline to design and perform PITCh knock-in to further expand the availability of this method by creating web-based design software, PITCh designer ( http://www.mls.sci.hiroshima-u.ac.jp/smg/PITChdesigner/index.html ), as well as presenting an experimental example of versatile gene cassette knock-in. PITCh designer can automatically design not only the appropriate microhomologies but also the primers to construct locus-specific donor vectors for PITCh knock-in. By using our newly established pipeline, a reporter cell line for monitoring endogenous gene expression, and transgenesis (TG) or knock-in/knockout (KIKO) cell line can be produced systematically. Using these new variations of PITCh, an exogenous promoter-driven gene cassette expressing fluorescent protein gene and drug resistance gene can be integrated into a safe harbor or a specific gene locus to create transgenic reporter cells (PITCh-TG) or knockout cells with reporter knock-in (PITCh-KIKO), respectively.

Establishment of expanded and streamlined pipeline of PITCh knock-in – a web-based design tool for MMEJ-mediated gene knock-in, PITCh designer, and the variations of PITCh, PITCh-TG and PITCh-KIKO

Science.gov (United States)

Nakamae, Kazuki; Nishimura, Yuki; Takenaga, Mitsumasa; Sakamoto, Naoaki; Ide, Hiroshi; Sakuma, Tetsushi; Yamamoto, Takashi

2017-01-01

ABSTRACT The emerging genome editing technology has enabled the creation of gene knock-in cells easily, efficiently, and rapidly, which has dramatically accelerated research in the field of mammalian functional genomics, including in humans. We recently developed a microhomology-mediated end-joining-based gene knock-in method, termed the PITCh system, and presented various examples of its application. Since the PITCh system only requires very short microhomologies (up to 40 bp) and single-guide RNA target sites on the donor vector, the targeting construct can be rapidly prepared compared with the conventional targeting vector for homologous recombination-based knock-in. Here, we established a streamlined pipeline to design and perform PITCh knock-in to further expand the availability of this method by creating web-based design software, PITCh designer (http://www.mls.sci.hiroshima-u.ac.jp/smg/PITChdesigner/index.html), as well as presenting an experimental example of versatile gene cassette knock-in. PITCh designer can automatically design not only the appropriate microhomologies but also the primers to construct locus-specific donor vectors for PITCh knock-in. By using our newly established pipeline, a reporter cell line for monitoring endogenous gene expression, and transgenesis (TG) or knock-in/knockout (KIKO) cell line can be produced systematically. Using these new variations of PITCh, an exogenous promoter-driven gene cassette expressing fluorescent protein gene and drug resistance gene can be integrated into a safe harbor or a specific gene locus to create transgenic reporter cells (PITCh-TG) or knockout cells with reporter knock-in (PITCh-KIKO), respectively. PMID:28453368

Application of a Virtual Ovation System to the ShinKori-3 Simulator

International Nuclear Information System (INIS)

Hong, Jin Hyuk; Lee, Myeong Soo; Chung, Kyung Hun

2011-01-01

The Ovation system for the Shin-Kori Unit 3 Simulator is essentially a non-redundant, repackaged subset of the actual plant I and C equipment, with additional interface computers (SimStations). This system also present in the simulator to provide communication between the plant model computer and the stimulated Ovation equipment. The stimulated Ovation equipment in the simulator system includes Operator HMI (Human- Machine Interface) equipment and Ovation virtual controllers hosted by Virtual Controller Host workstations, which are not present in the actual plant DCS system. The simulator for the Shin-Kori Unit 3 and 4 is being developed by Korea Hydro and Nuclear Power's Central Research Institute (KHNP CRI). One of the features of the simulator is its application of a virtual Ovation system capable of simulated functionalities such as run, freeze, snapshot, backtrack and others required by ANSI/ANS-3.5 in addition to the original functionality for the actual Ovation system applied at the plant. This is the first application of a virtual Ovation system to a full-scope simulator for a nuclear power plant in Korea. The purpose of this paper is to provide the overall architecture of the communication system between the virtual system and the simulator model and to describe the current situation of the development of the system and recent relevant studies

Cutset Quantification Error Evaluation for Shin-Kori 1 and 2 PSA model

International Nuclear Information System (INIS)

Choi, Jong Soo

2009-01-01

Probabilistic safety assessments (PSA) for nuclear power plants (NPPs) are based on the minimal cut set (MCS) quantification method. In PSAs, the risk and importance measures are computed from a cutset equation mainly by using approximations. The conservatism of the approximations is also a source of quantification uncertainty. In this paper, exact MCS quantification methods which are based on the 'sum of disjoint products (SDP)' logic and Inclusion-exclusion formula are applied and the conservatism of the MCS quantification results in Shin-Kori 1 and 2 PSA is evaluated

Comparison of the Radionuclides Dispersion at the UAE Barakah Site with that at the ROK Shin-Kori Site - Comparison of the radionuclides dispersion in Barakah site with that in Shin-Kori site

Energy Technology Data Exchange (ETDEWEB)

Kim, Sung-yeop; Lee, Kun Jai; Chang, Soon Heung [Korea Advanced Institute of Science and Technology, 291 Daehak-ro, Yuseong-gu, Daejeon, 305-701 (Korea, Republic of); Beeley, Philip A. [Khalifa University of Science, Technology and Research, P.O. Box 127788, Abu Dhabi (United Arab Emirates)

2014-07-01

In order to understand the characteristics of atmospheric dispersion of radionuclides in the desert environment of Barakah site in UAE, comparison research with the results of other environments could be an appropriate way to facilitate it. Shin-Kori site is the proper comparison target because same reactor type of APR1400 with that in Barakah site is under construction. Hypothetical accident scenario was considered and accident source term which had been developed in previous research has been applied as releasing source. After reviewing several computation codes, ADMS5 has been selected as an atmospheric dispersion modeling tool which is installing advanced Gaussian plum model and plentiful options. The climate data of both Barakah and Shin-Kori were acquired and the environments of both sites have been simulated considering wind speed, wind direction, temperature, humidity, ground surface roughness and etc. Near field final human doses on the maps have been schematised regarding statistical meteorological data of both sites and dose conversion factors from the publications of ICRP and federal guidance report of EPA. The results of this research are expected to enhance the understanding about differences between two environments which have same reactor type and to improve the comprehension of desert environment of Barakah site as well. Applying different dose conversion factors to Barakah site considering the desert biosphere could be further study to obtain more accurate results. (authors)

The software testing of PPS for shin Ulchin nuclear power plant units 1 and 2

International Nuclear Information System (INIS)

Kang, Dong Pa; Park, Cheol Lak; Cho, Chang Hui; Sohn, Se Do; Baek, Seung Min

2012-01-01

The testing of software (S/W) is the process of analyzing a software item to detect the differences between existing and required conditions to evaluate the features of the software items. This paper introduces the S/W testing of Plant Protection System (PPS), as a safety system which actuate Reactor Trip (RT) and Engineered Safety Features (ESF) for Shin Ulchin Nuclear Power Plant Units 1 and 2 (SUN 1 and 2)

PORNOGRAFI DALAM SERIAL ANIME ANAK (ANALISIS SEMIOTIKA DALAM SERIAL CRAYON SHIN CHAN

Directory of Open Access Journals (Sweden)

- Sangidun

2017-01-01

Full Text Available Crayon Shin Chan, a Japanese two-dimension animation series broadcast in one of private Indonesian TVs, is categorized into child’s program since it is broadcast at child’s prime time, Sunday 08.30 a.m. In spite of its broadcast time, this series consist of symbols directed not for children, such as some acts that are not appropriate to be done by children, especially in Indonesia. Moreover, adult symbols of sex are also found in the program. For this reason it will be interesting to analyze it using semiotic analysis. Semiotics is the study of symbol and its meaning which its principle concept is that both signifier and signified consist of symbols and are related to denotation and connotation.   Crayon Shin Chan merupakan serial animasi dua dimensi yang tayang di salah satu stasiun televisi swasta di Indonesia. Ini merupakan produk animasi 2 dimensi yang diimpor dari Jepang. Di Indonesia, serial ini masuk dalam kategori acara anak. Hal ini dapat dilihat dari jam penayangannya yang merupakan waktu prime time bagi anak, yakni pada hari minggu pukul 08.30. Akan tetapi, pada serial ini banyak simbol-simbol yang mengarah pada tayangan yang bukan untuk anak-anak, yakni adeganadegan yang tidak pantas dilakukan oleh anak khususnya di Indonesia. Serta adanya pula simbol-simbol yang mengarah pada tayangan berbau dewasa. Tentu akan menarik jika tayangan ini diteliti menggunakan analisis semiotika. Semiotika sendiri merupakan kajian ilmu mengenai tanda dan makna. Yang pada prinsipnya, konsep penting seperti penanda (signifier dan petanda (signified sama-sama terdiri dari tanda dan terkait dengan denotasi dan konotasi.

The soleus syndrome. A cause of medial tibial stress (shin splints).

Science.gov (United States)

Michael, R H; Holder, L E

1985-01-01

Radionuclide bone scans have demonstrated linear uptake along the posterior medial border of the tibia in patients with shin splints. This area was investigated by anatomical dissection (14 human cadavers), electromyographic (EMG) and muscle stimulation studies (10 patients), and open biopsy (1 patient). Histologically, the increased metabolic activity manifested on the radionuclide scan is due to a periostitis with new bone formation. The soleus muscle and its investing fascia are anatomically and biomechanically implicated in the production of these stress changes, particularly when the heel is in the pronated position. The soleus muscle and fascia form a tough "soleus bridge" over the deep compartment which is thought to be important in patients requiring surgical decompression.

Analysis of Hydrogen Concentration Distribution during an SBO Accident for Shin-Ulchin APR1400

Energy Technology Data Exchange (ETDEWEB)

Kim, Jongtae; Hong, Seong Wan [Korea Atomic energy Research Institute, Daejeon (Korea, Republic of)

2013-10-15

To prohibit the accumulation of hydrogen, the containment volume is considered to reduce the hydrogen concentration, or hydrogen mitigation devices such as PARs or igniters are installed in the containment. In the case of the Fukushima NPPs, the applied strategy for the hydrogen safety is the use of a containment venting system (CVS). In this way, the hydrogen accumulated in the containment vessel is vented into the environment. One of the causes of the hydrogen explosions occurring in the containment buildings of the Fukushima NPPs is expected to be the failure of the venting system. The hydrogen was therefore easily accumulated in the containment building. It is uncertain what the ignition source for the hydrogen combustion was during the accident. However, it is not too conservative to assume that an ignition source exists at any time and any place in a containment during a core-melt accident. Shin-Ulchin 1 and 2, which are construction plants of an APR 1400, are two of the newest NPPs in Korea. They have many features to enhance the safety margin during a design-based and beyond-design-based accident. One of them is the in-containment refueling water storage tank (IRWST) located inside the containment. It is used as a sink/source for feed-bleed operation. When the core is damaged along an accident progression, the hydrogen generated in the RPV can be released into the IRWST of the APR1400 with steam and water. From a previous study, it was found that a highly concentrated hydrogen/air mixture can be developed if the hydrogen is released into the IRWST. In the case of Shin-Ulchin 1 and 2, the hydrogen mitigation strategy during a high-pressure accident such as a station blackout (SBO) is changed by installing a 3-way valve. When a severe accident management (SAM) for the plant is initiated, the flow path from a pressurizer to the IRWST is changed into a steam-generator (S/G) compartment by turning the 3-wat valve actively (pilot operated). By doing so, it is

The Life and Works of Han Shin Gwang : a Midwife and Nurse of Korean Modern Times

Directory of Open Access Journals (Sweden)

YI Ggodme

2006-06-01

Full Text Available Han Shin Gwang, born in an early Christian family in Korea in 1902, could get western education different from the ordinary Korean girls in that period. She participated in the 1919 Samil Independence Movement in her teens, and got nursing and midwifery education in a missionary hospital. She got a midwife license and worked as a member in an early mother-and-child health center. She organized 'Korean Nurses' Association' in 1924 and focused on public health movement as the chairwoman. She actively participated in women's movement organizations, and Gwangjoo Student's Movement. She was known to be a representative of leading working women, and wrote articles on woman's right, the needs and works of nurses and midwives. From late Japanese colonial period, she opened her own clinic and devoted herself to midwifery. After the Korean Liberation in 1945, she began political movement and went in for a senate election. During the Korean War, she founded a shelter for mothers and children in help. After the War, she reopened a midwifery clinic and devoted to the works of Korean Midwives' Association. Han Shin Gwang's life and works belong to the first generation of Korean working women in modern times. She actively participated in women's movement, nurses' and midwives professional movement, Korea liberation movement, and mother-and-child health movement for 60 years. Her life is truly exemplary as one of the first generation of working women in modern Korea, distinguished of devotion and calling.

Application of the coupled code system KIKO3D/ATHLET to the boron dilution transients in VVER-440 Type NPP

International Nuclear Information System (INIS)

Hegyi, G.; Kereszturi, A.; Trosztel, I.

2003-01-01

The transient caused by a perturbation of boron concentration and coolant temperature at the inlet of a Russian developed reactor (VVER-440) is reanalysed as a part of the modernisation (introduction of a new type profiled fuel) and power upgrading (up to 108 %) project. This task is one of the basis cases to be investigated in the safety analysis of the pressurized water reactor (PWR) and the criteria of Anticipated Operational Occurrences (AOO) have to be fulfilled for it. First detailed planning calculations were performed with the thermal hydraulic system code ATHLET and neutron physical code system KARATE-440 to find out the appropriate initial parameter set taking into account the active safety system of the NPP. Finally the most reactive case is analysed by the KIKO3D/ATHLET coupled system code. Whereas the investigation is done for safety analysis, conservative assumptions are imposed on reactivity characteristics. Moreover at the core inlet no-mixing is supposed from the unaffected loops. The presented calculations show, how the coupled code system with a detailed description of plant functions and core behaviour can help to understand better the local phenomena in the study of a potential risk of dilution accident, as it offers the possibility to evaluate the plant safety in a more realistic and versatile manner. (author)

Overview of FY1997 human media technology R and D; 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu seido Shin energy Sangyo Gijutsu sogo Kaihatsu Kiko itaku jigyo. Human media no kenkyu kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

This paper reports a summary of results in fiscal 1997 of research and development of human media technology. Fiscal 1997 launched design and trial fabrication of the following items: interface to improve efficiency and safety of plant operators, accommodation of multimedia contents to aid Kansei design, city development design aiding technologies using contents retrieval and presentation technologies and virtual reality, and empirical evaluation technologies for safety, comfort and convenience. Specific study assignments were extracted on a virtual media technology, a Kansei media technology and a knowledge media technology being three elementary technologies for human media to make clear the research and development approaches to be taken in the coming fiscal years. In addition, a human media technology committee, a research and development working group, and an investigation working group were established. Also launched were investigations on research trends in the human media technology, and investigative researches on contacts of information needs in industries with human media. 59 refs., 114 figs., 24 tabs.

Bone tissue density modification in treatment of shin pseudoarthrosis by transosseous compressive osteosynthesis

Directory of Open Access Journals (Sweden)

Tishkov N.V.

2011-12-01

Full Text Available Objective is to detect bone mineral density along the shin according to «Esperanto» levels by Hounsfield's scale. Materials and methods. The analysis of density modification in 25 patients with pseudoarthrosis of tibia with predominant localization in a lower one-third of bone has been carried out. Results. By means of computed tomography it has been revealed that the bone tissue density of the tibia in the process of false joint union when using the compressive variant of combined transosseous osteosynthesis has changed according to the regularity reproducing phase character of the accumulation of mineral substances in the bone. Conclution. The growth of mineral density of the bone tissue during treatment spreads in the directions from proximal and distal metaepiphyses to the zone of pseudoarthrosis knitting

Fiscal 1996 survey report. `Ultra high electronic technology development promotion project` under consignment from NEDO; 1996 nendo kenkyu seika hokokusho. Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku jigyo `chosentan denshi gijutsu kaihatsu sokushin jigyo`

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-05-01

For the purpose of establishing ultra high technology of a next next generation level which is a basic technology in the electronic information field, a key to the realization of the high grade information society and a common technology base giving marked influences to the wide range industrial field, the R and D was started of ultra fine processing process technology, technologies on limit measuring/analysis/control and new functional electronic materials. Themes of the R and D are electronic beam direct picture drawing system technology, ultra short wavelength electromagnetic radiation patterning/system technology, ultra fine sensitizing technology to draw pictures on metal and crystal surfaces using ultra short wavelength laser beams, shading system technology of shading mask to be used to the process of drawing ultra high accuracy and complicated figures, ultra high tech plasma reactive measuring/analysis/control technologies which become the base of ultra thin films and ultra fine etching using plasma, ultra high tech cleaning base technology, ultra high sensitivity medium technology, new functional element/film formation technology, etc. 137 refs., 358 figs., 38 tabs.

Fiscal 1997 survey report. `Ultra high electronic technology development promotion project` under consignment from NEDO; 1997 nendo kenkyu seika hokokusho. Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku jigyo `Chosentan denshi gijutsu kaihatsu sokushin jigyo`

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-05-01

For the purpose of establishing ultra high technology of a next next generation level, the R and D was conducted of ultra fine processing process technology, technologies on limit measuring/analysis/control and new functional electronic materials. Themes of the R and D are electronic beam direct picture drawing system technology, ultra short wavelength electromagnetic radiation patterning/system technology, ultra fine sensitizing technology, ultra high accuracy shading system technology, ultra high tech plasma reactive measuring/analysis/control technology, ultra high tech cleaning basic technology, ultra high sensitivity medium technology, new functional element/film formation technology, etc. This R and D is a greatly influential basic research in the whole industrial field, and therefore, it is necessary that researchers standing foremost in each field of industry/university/government join the project and that various R and D infrastructures are made the most of. For this, the concentrated joint research method and the dispersed joint research method are combined, and the R and D is being conduced by equal partnership of each researcher. 421 refs., 823 figs., 91 tabs.

THE METHOD OF PNEUMATIC IMITATION OF WEIGHT-BEARING IN CHILDREN WITH SHIN FRACTURES

Directory of Open Access Journals (Sweden)

N. Yu. Serova

2012-01-01

Full Text Available The article contains a comparative analysis of shin fracture treatment in 102 children at the age of 4–18 years old. The main group consisted of 51 (50% children, who received postoperative treatment according to the method of pneumatic imitation of weightbearing both on health and injured limbs with «Korvit» apparatus. The control group consisted of 51 (50% patients who did not received the afore-mentioned method of postoperative treatment. The groups were comparable on age, trauma mechanism and localization, surgical operation and complex postoperative therapy. Children of the first group were found to have shorter period of time needed to achievement of pain relief, soft tissue swelling decrease, restoration of the movements in adjacent joints and somatometry values normalization, which allowed earlier verticalization and shorter period of hospitalization.

"Shin splint" syndrome and tibial stress fracture in the same patient diagnosed by means of (99m)Tc-HMDP SPECT/CT.

Science.gov (United States)

Vicente, Justo Serrano; Grande, Maria Luz Domínguez; Torre, Jose Rafael Infante; Madrid, Juan Ignacio Rayo; Barquero, Carmen Durán; Bernardo, Lucía García; Sánchez, Román Sánchez

2013-04-01

We show a patient who presented leg pain triggered by intense exercise. The most likely diagnosis was a possible tibial stress fracture or a "shin splint" syndrome (soleus enthesopathy). We performed a bone scintigraphy including SPECT/CT that revealed the presence of the two concomitant pathologies. SPECT/CT identified the hot spot superimposed with bone lesion in the tibial stress fracture and only remodeling activity without evidence of cortical lesions in the enthesopathy processes.

Project Experience of MMIS for Shin-Hanul units 1 and 2 (Component Design, Manufacturing and Testing)

Energy Technology Data Exchange (ETDEWEB)

Koo, Seo-ryong; Kim, Kook-hun [Doosan Heavy Industries and Construction Co. Ltd., Hwaseong (Korea, Republic of)

2015-10-15

Doosan is uniquely positioned in the field of nuclear power plant in the world-wide. Doosan has secured the first step to nuclear technology field through the development of the nuclear power plant (NPP) man machine interface system (MMIS), which is one of the three major core technologies of non-independence. In the nuclear power plant, MMIS takes a function as the brain and nerve system in the human body. Korean MMIS was selected for the Shin-Hanul units 1 and 2 for the first time and Doosan is charge of a component design and equipment supply. At the end of successful completion of MMIS for Shin-Hanul units 1 and 2, Doosan will be a total provider of the MMIS from development, validation, and manufacturing to delivery in Korea. Man Machine Interface System (MMIS) is equivalent to the brain and nerve system of a nuclear power plant. It monitors and controls the operating conditions to prevent accidents proactively. Doosan achieved a complete development of MMIS which is core part of nuclear technology that was relied on oversea's companies in the past by an accomplishment of RnD in cooperation with domestic utility, KHNP and research institutions. Doosan's MMIS is very user-friendly, easy to understand, transparent to audits, and guarantees maximum reliability, availability, maintainability, and safety. Doosan proved safety and reliability through test and inspection of integrated function of nuclear safety and non-safety control system. Doosan MMIS was evaluated a one of the best system through IAEA IERIC's review via safety guide from IAEA specialist's group in 2010. Doosan also achieved the improvements of quality through the KINS audits in 2014.

Feeling of reality, bodily sensation, and pleasant perspiration. Let's play and learn town of natural energy (New energy vision in Shin-asahi Town in Shiga Prefecture); Jikkan taikan kaikan. Asonde manabo shizen energy no machi (Shinasahicho energy vision)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

With an objective to build a resource circulation type society, a basic guideline was established for introducing new energies upon investigating the status of new energy existence, problems and countermeasure thereon to encounter when setting and introducing the targeted introduction values, and specific measures for promoting the introduction. The activity achievements were put into order by the following seven items: 1) the background and purpose, 2) summary of Shin-asahi Town, 3) energy demand and supply conditions in Shin-asahi Town, 4) natural energies available in Shin-asahi Town, 5) directionality of the energy vision, 6) specific targets and introduction scenario, and 7) the energy vision promotion systems. In item 6, the target of introduction in fiscal 2010 was set to 36,300 Gcal/year (reduction of CO2 emission of 15% of the 1999 criterion). The scenario discusses energy efficiency improvement, solar energy, wind power generation, small hydropower generation, and bio-mass. For the efficiency improvement, construction of a natural energy park with wind mills was taken up for the purpose of enlightenment and education of the residents. (NEDO)

Safety Evaluation of Full Digital Plant Protection System of Shin-Kori 3 and 4 in Korea

International Nuclear Information System (INIS)

Koh, J. S.; Kim, D. I.; Jeong, C. H.; Park, H. S.; Ji, S. H.; Kang, Y. D.; Park, G. Y.

2009-01-01

Keeping pace with the emerging trend of digital computer technologies, KHNP has utilized full digital plant protection system into the design of I and C systems at SKN 3 and 4. This paper presents safety review activities and results related to digital plant protection systems during the licensing of construction permit for the Shin-Kori 3 and 4(SKN 3 and 4) in Korea. The major licensing issues regarding the digital systems were software quality and cyber security during planning stage, system integrity with fail-safe design, EMI equipment qualification of digital systems, FPGA qualification and communication independence between safety and non-safety System. This paper addresses our approach to evaluate full digital protection systems with revised safety review guidelines and the resulting discussion to resolve the licensing issues

K-Ar chronological study of the quaternary volcanic activity in Shin-etsu Highland

International Nuclear Information System (INIS)

Kaneko, Takayuki; Shimizu, Satoshi; Itaya, Tetsumaru.

1989-01-01

In order to clarify the temporal and spatial patterns in arc volcanism, 55 K-Ar ages of volcanic rocks from 17 volcanoes in Shin-etsu Highland, central Japan were determined. In addition, life spans, volume of erupted materials and eruption rates of each volcano were estimated. Graphical analysis demonstrates that volume of ejecta varies proportionately with both life span and eruption rate, and that there is no significant correlation between eruption rate and distance from the volcanic front. The life span of each volcano in this Highland is less than 0.6 m.y. In the central Shiga and southern Asama area, the volcanism started at 1 Ma and is still active. However the former had a peak in the activity at around 0.5 Ma, while the latter is apparently most intense at present. Northern Kenashi area has the volcanism without peak in 1.7 - 0.2 Ma, though the activity within a volcanic cluster or chain in central Japan lasts generally for 1 m.y. or less with a peak. (author)

Single-dose Toxicity of ShinYangHur Herbal Acupuncture

Directory of Open Access Journals (Sweden)

Eunhye Cha

2015-06-01

Full Text Available Objectives: This study was carried out to analyze the single-dose toxicity of ShinYangHur (SYH herbal acupuncture injected into the muscles of Sprague-Dawley (SD rats. Methods: The SYH herbal acupuncture was made in a clean room at the Korean Pharmacopuncture Institute (KPI, Korea-Good Manufacturing Practice, K-GMP. After the mixing process with sterile distilled water, the pH was controlled to between 7.0 and 7.5. Then, NaCl was added to make a 0.9% isotonic solution by using sterilized equipment. All experiments were conducted at Biotoxtech, an institution authorized to perform non clinical studies under the regulations of Good Laboratory Practice (GLP. SD rats were chosen for the pilot study. Doses of SYH herbal acupuncture, 0.25, 0.5, and 1.0 mL, were administered to the experimental groups, and a dose of normal saline solution, 1.0 mL, was administered to the control group. This study was conducted under the approval of the Institutional Animal Ethics Committee. Results: No deaths or abnormalities occurred in any of the four groups. No significant changes in weight, hematological parameters or clinical chemistry between the control group and the experimental groups were observed. To check for abnormalities in organs and tissues, we used microscopy was used to examine representative histological sections of each specified organ; the results showed no significant differences in any of the organs or tissues. Conclusion: The above outcomes suggest that treatment with SYH herbal acupuncture is relatively safe. Further studies on this subject are needed to yield more concrete evidence.

Conductometric study of reaction kinetics between potassium superoxide and 18-crown-6 in dimethylsulfoxide

International Nuclear Information System (INIS)

Efimova, I.V.; Opejda, I.A.

2000-01-01

Complexing within KO 2 -18-crown-6-solvent, KOH-18-crown-6-solvent and KI-KO 2 -18-crown-6-solvent systems in dimethylsulfoxide was studied by measurement of electrical conductivity. It was shown that time variation of electrical conductivity under the given conditions was described by the Erofeev-Auramy equation, the coefficients of that equation for various systems were determined, time to reach equilibrium state was estimated. Linear dependences of electrical conductivity of KI-KO 2 salt solutions at presence of 18-crown-6 at the state of equilibrium in contrast to the component concentrations were determined [ru

Survey for working out a new energy vision of the Tateshina Town area; 2001 nendo Tateshina machi shin energy vision sakutei chosa hokokusho. Chiiki shin energy vision sakutei tou jigyo

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-02-01

For the purpose of promoting the introduction of new energy and heightening the awareness of new energy in Tateshina Town, Kita-saku County, Nagano Prefecture, study was made of the existence amount of new energy, energy consumption amount in the town, project for the concrete introduction, etc., and a 'new energy vision of the area' was worked out. According to the sample survey, in the energy supply/demand structure of Tateshina Town, electricity was 32.2%, kerosene 23.9%, gasoline 17.1%, light oil 11.2%, heavy oil 10.3%, etc. By sector, the commercial/residential sector was 57.1%, transportation sector 25.9% and industrial sector 17.0%. The demand in FY 2010 is expected to increase by 8.9%-22.0% in FY 2010. For the project on new energy introduction, the following were studied: supply of new energy information, support of the introduction to town people, energy utilization of forest resource, preparation of an eco-museum in the Shin-jin'nai forest park, promotion of the tourism using new energy, study of energy utilization of stockbreeding waste, introduction to administrative facilities, etc. (NEDO)

Stemcell Information: SKIP000474 [SKIP Stemcell Database[Archive

Lifescience Database Archive (English)

Full Text Available Gideon ... Fetus Unknown ... -- No MRC-iPS-62|MRC5-derived iPS cells| MRC5由来iPS細胞| human ES-like Res... SKIP000474 ... fetal lung fibroblast 胎児肺線維芽細胞 Unknown MRC-iPS-62 MRC-iPS-62 Gideon...459.x--10.1371/journal.pgen.1002085 Lectin microarray analysis of pluripotent and multipotent stem cells.--D...NA methylation dynamics in human induced pluripotent stem cells over time. Toyoda M, Yamazaki-Inoue M, Itaku...med/21155951--http://www.ncbi.nlm.nih.gov/pubmed/21637780 -- Some of clones of the same original cells have been used in the papers.

Book Review ~ Advancing Online Learning in Asia. Editors: David Murphy, Namin Shin, and Weiyuan Zhang

Directory of Open Access Journals (Sweden)

Insung Jung

2004-08-01

Full Text Available The Internet, high-speed electronic communications, and computers have transformed the way we teach and learn. With the development of these new information and communication technologies, the idea of online education has been adopted in many developed, and more recently in developing countries, to bring wider opportunities to people in the form of increased access to flexible and interactive, open and distance learning systems. As stated in the Introduction of “Advancing Online Learning in Asia” edited by Murphy, Shin, and Zhang, online education is now everywhere and it “is changing the ways in which educational institutions interact with their students, for both traditional and distance education universities.” By examining recent developments of online education in Asia from multiple perspectives, this book has a potential to be an invaluable resource to educators. Taking cases from the Asian region in which online learning was introduced, implemented, and experienced, this book presents the cases from a number of perspectives, especially from student perspectives, and addresses pedagogical and technical issues faced by online educators. The breadth of the articles in this book provides a wide range of online learning cases and varied perspectives, which should clearly appeal to educators, researchers, administrators, and policy makers in online education.

Fiscal 1997 R and D project under a consignment from NEDO. R and D of the femtosecond technology; 1997 nendo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Femto byo technology no kenkyu kaihatsu (femto byo technology no kenkyu kaihatsu) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Ultrahigh-speed electronic technology is indispensable for creating industrial basic technologies supporting the advanced information society in the 21st century. Control technology of photonic and electronic states in a femtosecond region is essential. To establish the development policy of generation and transmission devices for femtosecond light pulses, research and analysis were made on nonlinear optical response and light pulse transmission properties. Basic issues on devices and materials such as mode-locked semiconductor laser, pulse compression device and light-light modulation material for coding were extracted. For new femtosecond light pulse control/distribution devices, research and analysis were made on response properties of intersubband transition phenomena in a semiconductor and electron spin relaxation phenomena, and semiconductor quantum structure. To develop metrological technology using ultra-short light pulse, study was made on an evaluation method for time- fluctuation of pulses in 100 femtosecond level. Generation of femtosecond high-intensity X-ray pulse was possible by fine control of the existing high-intensity laser. 19 refs., 26 figs., 1 tab.

Differences among four meat goat breeds for doe fitness indicator traits in the southeastern United States.

Science.gov (United States)

Wang, L; Nguluma, A; Leite-Browning, M L; Browning, R

2017-04-01

Sustainable meat goat production begins with the identification and use of maternal breeds that demonstrate relatively enhanced levels of fitness under less-than-optimal conditions. The Myotonic goat is a heritage breed that is lacking in comparative assessment for female fitness. In this study, Boer ( = 73), Kiko ( = 115), Myotonic ( = 80), and Spanish ( = 114) meat goat does were compared for traits associated with health and reproduction. The herd was semi-intensively managed on humid subtropical pasture for 6 yr. The study included 838 doe-year matings and over 2,000 records for BW, fecal egg count (FEC), and packed cell volume (PCV). Body weights of Boer and Kiko does were heavier ( meat goat doe performance under limited-input management conditions. Myotonic does maintained the lowest FEC among all doe breeds and warrant further evaluation as a genetic resource for controlling gastrointestinal parasitism.

Software V and V of PPS for Shin-Hanul Nuclear Power Plant Units 1 and 2

International Nuclear Information System (INIS)

Park, Cheollak; Kang, Dongpa; Choe, Changhui; Sohn, Sedo; Beak, Seungmin

2013-01-01

Software V and V processes determine whether the development products of a given activity conform to the requirements of that activity and whether the software satisfies its intended use and user needs. This paper introduces the software V and V activities and tasks performed during the software development life cycle performed during the software development life cycle of the Plant Protection System (PPS) for Shin-Hanul Nuclear Power Plant Units 1 and 2 (SHN 1 and 2). The PPS generates signals to actuate Reactor Trip (RT) and Engineered Safety Features (ESF) whenever monitored processes exceed predetermined limits, and the PPS software is classified safety critical and an independent V and V is thus required according to regulations, code and standards. The software V and V efforts, sufficiently disciplined and rigorous, are quite essential to demonstrate that the software development process is of a high quality. The software V and V of PPS for SHN 1 and 2 has been accomplished successfully with systematic V and V procedures and methods established until test phase in compliance with related code and standards. In particular, the use of automated tools such as LDRA and DOORS greatly has contributed to an improvement of a software quality, and a reduction of a verification time and human errors

Report on the research and development under a consignment from NEDO of high temperature carbon dioxide fixation and utilization technology for fiscal 1996; 1996 nendo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku gyomu seika hokokusho. Nisanka tanso koon bunri kaishu sairiyo gijutsu kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

For the prevention of global warming, this R and D is aimed at separating/recovering high temperature CO2 from high temperature gas at 300degC or above and developing technology for effective use of the recovered CO2 as measures taken for reduction in CO2 emissions from the fixed emission sources. In this fiscal year, the following were proceeded with: heightening of separation performance evaluation technology, promotion of technical development of ceramic separation membranes and supports, and development of element technology of modular integration. In the examinational research on separation technology and system optimization, the following were conducted: survey of trends of the technical development, conceptual design of plant and prediction of process behavior, assessment of applicability of the process, and study of effects of utilization/spread of the developmental technology. In the former R and D, borosilicate glass powder rich in alkali is formed on the ring by joining the trially manufactured hollow fiber type membrane and the same form alumina cylinder, and sealing property and strength which stand measurement of permeability were confirmed. In the latter, an innovative process applied with CO2 high temperature separation technology was studied to examine effects of the spread of high temperature gas separation technology. 403 refs., 478 figs., 134 tabs.

Fiscal 1997 report under consignment from NEDO on photon measuring/processing technology (development of power generation facility use high-function maintenance technology); 1997 nendo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku photon keisoku kako gijutsu (hatsuden shisetsuyo kokino maintenance gijutsu kaihatsu) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

A research/development was conducted on technologies of photon applied measuring/photon applied processing/photon generation which are usable for heightening of reliability and maintenance efficiency of power generation facilities. In fiscal 1997, high melting-point metal particles were manufactured by high energy density laser for formation of high temperature and stabilized fine functional circuit. Further, a wavelength changeable ultra red laser light source was studied which can make in-situ measurement of gas concentration and components. A study was also made to examine the surface composition by measuring fluorescent X-rays emitted by radiating high intensity laser beam on the surface of material. A rod type and a slab type as a high-output complete-solidified laser are under development. There is also a development aiming at high speed/high quality photon processing such as high speed/high precision welding/cutting and laser joining. Besides, a study is being made of high energy pulse/high quality beam complete-solidified laser. The paper made a comprehensive survey of the trend of the photon measuring/monitoring technology, and made a systematical arrangement of the developmental subjects extracted. 142 refs., 357 figs., 62 tabs.

Fiscal 1996 report on the results of the R and D under a consignment from NEDO of environmental technology such as recycling (for public). 1; 1996 nendo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Recycle nado kankyo gijutsu kenkyu kaihatsu seika hokokusho (kokaiyo). 1

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

This R and D is aimed at promoting reduction in environmental loads by waste, etc. and reutilization of waste, etc., and at developing environmental technology such as recycling contributing to reducing road traffic noise. Studies were made on operation conditions of material separation in the bottle state and flake state, color separation, washing process, etc. Moreover, tests were conducted on comparisons of performance of shredders with different functions. Running tests of 100,000 times were conducted to confirm effectiveness of durability of the paved road with used papers. Measurement of hardness of the resin using the sol-gel method and coating experiment using organic dye were carried out to study the membrane effect speed and flaw resistance of coating of coloring bottles. Gasification of shredder dust and separation of nonferrous metal and glass were conducted to get the basic data. As to FRP bath tubs, the ratio of glass fiber and plastics was studied and western tiles were trially manufactured. Further studies were made of removal conditions of noncombustibles, chlorine and sulfur content, and reaction conditions of alkali additives including kind, quantity and addition method. 166 figs., 132 tabs.

2007 Joint Chem Bio Decon and Protection Conference and Exhibition

Science.gov (United States)

2007-10-25

Choung USMC Ms. Lindy Burkhart USN Mr. Carl Goalie Technical Manager (Navy) Mr. Kiko Lama Transition Manager (Joint) LTC Green Oversight Group DUSD (AS&C...may not be possible to pull units for decon for days at a time UNCLASSIFIED UNCLASSIFIED 13 Mud, Crud, & Blood • Should be assumed as a

Masculinidades subversivas nos romances de Manuel Puig, Caio Fernando Abreu e Jaime Bayly

Directory of Open Access Journals (Sweden)

Oswaldo Alves Lara Neto

2014-05-01

Full Text Available Produção: Claudia Priscilla e Pedro Marques. Vestido de Laerte. São Paulo: Paleo TV, 2012. 1 HDCAM.   Produção: Claudia Priscilla e Kiko Goifman. Olhe para mim de novo. São Paulo: Paleo TV, 2011. 1 HDCAM

Fiscal 1997 report under consignment from NEDO on the R and D of femto-second technology (development of ultra short pulse optoelectronics technology); 1997 nendo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku femto gyo technology no kenkyu kaihatsu (chotan pulse ko electronics gijutsu kaihatsu) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Very high speed electronics technology is indispensable for the creation of industrial base technology which supports high grade informatizing in the 21st century. The state of light and electronics is controlled in the femto-second time domain. As to the development of femto-second light pulse generation/transmission technology, mode synchronous semiconductor laser was manufactured using the strain quantum well structure aiming at heightening profit, and the repeated frequency, 166GHz, was achieved. Relating to the pulse compression element, exciton photonic band was newly designed. A technology of coding was also studied. As to the development of technology of femto-second light pulse control/distribution, shortening of the wavelength down to 1.5{mu}m and a possibility of femto-second domain high speed response were indicated by the combined double quantum well structure. The quantitative measurement of spin relaxation characteristics was successfully made. By the Mach-Zehnder light switch, obtained was the world`s fastest light switching characteristic. To realize the femto-second class very high speed element, conditions were grasped on the crystal growth of Sb based ultra thin films operating in the 1.5{mu}m zone by studying the quantum well using transition among sub-bands. 242 refs., 280 figs., 12 tabs.

Design and implementation of an advanced protection system for the Shin-Kori 3 and 4 nuclear power plant

International Nuclear Information System (INIS)

Kim, Yonghak; Choi, Woongseock; Kwon, Jongsoo; Wilkosz, Stephen J.; Ridolfo, Charles F.; Yanosy, Paul L.

2008-01-01

The Nuclear Power Industry is currently embracing modern digital technology for upgrades to existing Instrumentation and Control (I and C) infrastructures as well as for incorporation into the next generation of new plants which will be coming 'on-line' during the next decade. This technology is being fully exploited for the next generation of advanced plant protection systems which will be initially deployed on the Shin-Kori 3 and 4 Nuclear Power Plant in the Republic of Korea. The system design for this plant protection system is being performed by the Korea Power Engineering Company (KOPEC) and builds upon the past generation of digital safety systems which were initially implemented at Ulchin 5 and 6. The advanced protection system is an evolution of this existing design and includes a number of improved operating attributes including: · Integration of Reactor Protection, Engineered Safety Features Actuation, and Qualified Indication and Alarm functions which were previously implemented by separate systems in the past. · Use of a 'soft control' interface which provides convenient accessibility to the safety systems from 'operator workstations' · Implementation of a Large Display Panel (LDP) which provides a consistent and constant representation of the overall plant state and of the plant safety status. The equipment for the advanced plant protection system is being provided by Westinghouse Electric Company (WEC) and utilizes the Westinghouse 'Common Q' Standardized qualified platform (where 'Q' denotes 'qualified'). The 'Common Q' platform is comprised of commercially dedicated Programmable Logic Controllers (PLC's), color-graphic Flat Panel Displays (FPD's) with integral touch screens, and high speed data communication links. It is a mature product that is in wide use for a number of safety-related applications. Among its key attributes are: · High overall system availability, which is achieved via use of a multiple channel configuration that is tolerant

Influence of territorial aggressiveness of ostrich males on egg ...

African Journals Online (AJOL)

Unknown

A score of. 10 was awarded to males that exhibited extreme territorial aggressiveness towards the observers. A colour chart that was compiled by using commercial paint colour charts, were used to score shin colour. A score of 0 represented a white shin colour, with 5 being a pink shin colour and 10 a bright crimson red.

Report on the results of research and development under a consignment from NEDO on deca-nano quantum integrating transistor substrate technologies; 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Deca-nano ryoshi shusekika soshi kiban gijutsu no kenkyu kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Researches have been conducted on deca-nano quantum integrating transistor substrate technologies, and developments were made on a three-dimensional device simulator which can be used in deca-nano domains, and a circuit simulator to have quantifying function transistors coexist with silicon semiconductor integrated circuits. The researches were intended to develop a simulator capable of analyzing properties of very small silicon and compound semiconductor devices in deca-nano domains. The researches discussed the applicability of conventional simulators, calculated quantum levels in a three-dimensional hetero structure, and resulted in development of an electron wave propagation simulator in optional two-dimensional shapes, a quantum Monte Carlo simulator, and a three-dimensional semiconductor device simulator with quantum correction. On the other hand, in order to estimate characteristics of a hybrid circuit in which single electron transistors coexist with conventional transistors such as CMOS transistors, a single electron hybrid circuit simulator was developed. The development indicated that a CMOS-SET fused memory is promising as a future LSI memory. 22 refs., 116 figs., 3 tabs.

Report on the results of the fiscal 1997 R and D under consignment from NEDO of photon measuring/processing technology (development of high-efficiency production process technology); 1997 nendo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku photon keisoku kako gijutsu (kokoritsu seisan process gijutsu kaihatsu) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Development is made of high energy-efficiency laser processing technology and high efficiency/high grade photon generation/control technology as laser light source, for the purpose of energy conservation/efficiency heightening of production processes which require a large amount of energy such as welding, joining, surface treatment, and particle fabrication. As to keyhole dynamics of the molten metal generated on the laser weld, construction of simulational mathematical models was started. Equipment to fabricate semiconductor ultrafine particles which become the core of quantum dot functional structures was designed to fabricate particles. In-situ optical measuring technology was studied of element/size of particles of below 30 nm in size by emission spectroscopy associated with the plasma irradiation. As tightly focusing all-solid-state laser technology, studied was the wavelength conversion method in which harmonics are generated four times as much as the fundamental wave due to high efficient generation of high power UV laser. Also studied were high laser strength, low optical losses, conditions for fostering high homogenity crystals. Technology for high accuracy processing of element surface was established. High efficiency photon generation technology was comprehensively investigated. 140 refs., 276 figs., 46 tabs.

Fiscal 1996 report on the results of the R and D of technology of high-level treatment/effective use of domestic/industrial wastes, etc. (for public); 1996 nendo Shin Energy Sangyo gijutsu Sogo Kaihatsu Kiko itaku seikatsu sangyo haikibutsu shori yuko riyo gijutsu kenkyu kaihatsu seika hokokusho (kokaiyo)

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

For the purpose of reducing environmental loads of waste and effectively using resource by waste recycling, a study was conducted of high-level treatment/effective use technology for domestic/industrial wastes, etc. The paper reported the results of fiscal 1996. In the EcoCement producing technology using the synthetic urban type waste, EcoCement with stable quality was obtained using sewage sludge and industrial waste as raw materials. In the specified freon decomposition disposal technology, an experiment was carried out on durability, etc. of the processing unit. In the high speed/reduced smell biological garbage disposal technology, technology of fermenting disposal, etc. were established, and at the same time technology of making garbage compost was developed. In the technology to manufacture environment friendly type plastic containers, etc., a degradation behavior was grasped of degradable plastics in the compost. In the spread type waste plastic/thermal recycle technology, studied were a system to collect waste and a system to make waste solid fuel. Technology to recycle coolant freon was studied. 14 refs., 261 figs., 137 tabs.

Fiscal 1997 research report on the R and D project under a consignment from NEDO. Photonics engineering (R and D of photonics measuring/processing technology); 1997 nendo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Photon keisoku kako gijutsu (photon keisoku kako gijutsu no kenkyu kaihatsu) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Survey was made on the trend of R and D on photonics engineering to clarify the direction of its impact and ripple effect on industrial fields. Reduction of environment burden, improvement of the productivity and reliability of products, and creation of new industries by novel creative R and D are necessary simultaneously. For reconsideration of the previous measurement and machining technologies in a manufacturing industry, use of photon (laser) beams is promising. As photonics engineering, photonics measurement and machining, and elemental and peripheral technologies for generation and control of photon were surveyed. Photonics application technologies for medical care and diagnosis, communication and transmission, entertainment, and chemical fields were also surveyed. In fiscal 1997 as the first year of this project, based on the results obtained in leading researches conducted until fiscal 1996, some technological issues were clarified through the survey on the latest trend of photonics engineering in measurement, machining and generation fields, and its feasibility in the other fields. 265 refs., 91 figs., 10 tabs.

Fiscal 1997 R and D project on industrial science technology under consignment from NEDO. Report on the R and D of nonlinear optoelectronic materials; 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Hisenkei hikari denshi zairyo no kenkyu kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

As to the development of organic base materials, the paper is going ahead with an evaluation, higher performance and further use as materials of basic optical properties of quirale nonlinear materials and organic conjugate base materials which are promising among organic low molecular materials. As the development of orientation control crystal growth technology, grooves for orientation control were formed on the surface of the lead glass substrate, from which thin film single crystals were obtained. The nonlinear response was studied of the glass where semiconducting fine particles dispersed in matrix glass. Glass scattering base prototype materials were selected by the sol-gel method and ultra-low melting-point glass method. The glass dispersion base materials by the very fast cooling method was also studied. For the purpose of realizing a high speed switching characteristic, a processing technology was developed of ultra fine particle dispersing polymer light waveguide. As to the technology for super lattice, the optimum nonlinear performance materials were selected mainly with the optimum complex super lattice base. Moreover, the three-dimensional super structuring technology was constructed to improve nonlinear optical characteristics. The comprehensive investigational study was conducted for effective promotion of the research development. 177 refs., 260 figs., 27 tabs.

Aristóteles y los publicistas: el anuncio de televisión como forma dramática

OpenAIRE

Esslin, Martin; Mora Contreras, Francisco Javier

2007-01-01

Presentación, traducción y notas de Kiko Mora (Universidad de Alicante). Martin Esslin desmonta la arquitectura narrativa del anuncio televisivo sobre la base de la retórica dramática aristotélica y de las formas del teatro contemporáneo, al tiempo que afirma la condición ritual de la publicidad ligada a los mitos que construyen nuestra ideología y nuestra cultura.

Plasmon enhanced fluorescence with aggregated shell-isolated nanoparticles.

Science.gov (United States)

Osorio-Román, Igor O; Guerrero, Ariel R; Albella, Pablo; Aroca, Ricardo F

2014-10-21

Shell-isolated nanoparticles (SHINs) nanostructures provide a versatile substrate where the localized surface plasmon resonances (LSPRs) are well-defined. For SHINEF, the silver (or gold) metal core is protected by the SiO2 coating, which is thicker than the critical distance for minimum quenching by the metal. In the present work, it is shown that an increase in the SHINEF enhancement factor may be achieved by inducing SHIN aggregation with electrolytes in solution. The proof of concept is demonstrated using NaCl as aggregating agent, although other inorganic salts will also aggregate SHIN nanoparticles. As much as a 10-fold enhancement in the SHINEF enhancement factor (EF) may be achieved by tuning the electrolyte concentrations in solution. The SHINEF experiments include the study of the aggregation effect controlling gold SHIN's surface concentration via spraying. Au-SHINs are sprayed onto layer-by-layer (LbL) and Langmuir-Blodgett (LB) films, and samples are fabricated using fluorophores with low and also high quantum yield.

Phylogenetic lineages in Pseudocercospora.

Science.gov (United States)

Crous, P W; Braun, U; Hunter, G C; Wingfield, M J; Verkley, G J M; Shin, H-D; Nakashima, C; Groenewald, J Z

2013-06-30

morphology, within the same geographic region, frequently differed phylogenetically, indicating that the application of European and American names to Asian taxa, and vice versa, was often not warranted. New genera - Pallidocercospora Crous, Phaeomycocentrospora Crous, H.D. Shin & U. Braun; New species - Cercospora eucommiae Crous, U. Braun & H.D. Shin, Microcyclospora quercina Crous & Verkley, Pseudocercospora ampelopsis Crous, U. Braun & H.D. Shin, Pseudocercospora cercidicola Crous, U. Braun & C. Nakash., Pseudocercospora crispans G.C. Hunter & Crous, Pseudocercospora crocea Crous, U. Braun, G.C. Hunter & H.D. Shin, Pseudocercospora haiweiensis Crous & X. Zhou, Pseudocercospora humulicola Crous, U. Braun & H.D. Shin, Pseudocercospora marginalis G.C. Hunter, Crous, U. Braun & H.D. Shin, Pseudocercospora ocimi-basilici Crous, M.E. Palm & U. Braun, Pseudocercospora plectranthi G.C. Hunter, Crous, U. Braun & H.D. Shin, Pseudocercospora proteae Crous, Pseudocercospora pseudostigmina-platani Crous, U. Braun & H.D. Shin, Pseudocercospora pyracanthigena Crous, U. Braun & H.D. Shin, Pseudocercospora ravenalicola G.C. Hunter & Crous, Pseudocercospora rhamnellae G.C. Hunter, H.D. Shin, U. Braun & Crous, Pseudocercospora rhododendri-indici Crous, U. Braun & H.D. Shin, Pseudocercospora tibouchinigena Crous & U. Braun, Pseudocercospora xanthocercidis Crous, U. Braun & A. Wood, Pseudocercosporella koreana Crous, U. Braun & H.D. Shin; New combinations - Pallidocercospora acaciigena (Crous & M.J. Wingf.) Crous & M.J. Wingf., Pallidocercospora crystallina (Crous & M.J. Wingf.) Crous & M.J. Wingf., Pallidocercospora heimii (Crous) Crous, Pallidocercospora heimioides (Crous & M.J. Wingf.) Crous & M.J. Wingf., Pallidocercospora holualoana (Crous, Joanne E. Taylor & M.E. Palm) Crous, Pallidocercospora konae (Crous, Joanne E. Taylor & M.E. Palm) Crous, Pallidoocercospora irregulariramosa (Crous & M.J. Wingf.) Crous & M.J. Wingf., Phaeomycocentrospora cantuariensis (E.S. Salmon & Wormald) Crous

Comparison of APR1400 safety between brake site and shin-Kori site Due to the difference in the climate conditions

International Nuclear Information System (INIS)

Yoon, Ho Joon; Lee, Jeong Ik; Lee, Jeong Ik

2012-01-01

Brake Nuclear Power Plant (BNPP) is now under the construction based on APR1400 designed by Korean Electric Power Corporation (KEPCO). APR1400 is a two loop pressurized water reactor, the nuclear steam supply system (NSSS) US designed for about put of 4,000 MWt, with a corresponding electrical output of approximately 1,390 MWe. The first APR1400 (SKN 3 and 4) constructed in Shin-Kori, Korea has been modified according to the surrounding environment of the United Arab Emirates. In this paper, authors would like to compare safety issues between B NPP and Skin due to the changes of surroundings, since the site characteristics are very different. For instance, the mean annual air temperature in the UAE is 28 .deg. C and the peak air temperature was recorded as 48.8 .deg. C. Sea temperatures are varying from 17. deg. C in January to 35. deg. C in August, while that of Korea is in 9-16. deg. C range. Hot climate of UAE and the malfunction of HVAC system can lead the increasing of the water temperature in safety injection system (SIS). The heated water in SIS may affect the safety margin of the peak cladding temperature (PCT). The change of PCT and response time according to design basis accident scenarios such as large break LOCA are analyzed in detail. To evaluate such effect, Mars code was utilized to evaluate assumed condition by KAIST and the analyses of the results were carried out by Khalifa Univ.

ASSOCIATION OF ISOMETRIC STRENGTH OF HIP AND KNEE MUSCLES WITH INJURY RISK IN HIGH SCHOOL CROSS COUNTRY RUNNERS.

Science.gov (United States)

Luedke, Lace E; Heiderscheit, Bryan C; Williams, D S Blaise; Rauh, Mitchell J

2015-11-01

High school cross country runners have a high incidence of overuse injuries, particularly to the knee and shin. As lower extremity strength is modifiable, identification of strength attributes that contribute to anterior knee pain (AKP) and shin injuries may influence prevention and management of these injuries. To determine if a relationship existed between isometric hip abductor, knee extensor and flexor strength and the incidence of AKP and shin injury in high school cross country runners. Sixty-eight high school cross country runners (47 girls, 21 boys) participated in the study. Isometric strength tests of hip abductors, knee extensors and flexors were performed with a handheld dynamometer. Runners were prospectively followed during the 2014 interscholastic cross country season for occurrences of AKP and shin injury. Bivariate logistic regression was used to examine risk relationships between strength values and occurrence of AKP and shin injury. During the season, three (4.4%) runners experienced AKP and 13 (19.1%) runners incurred a shin injury. Runners in the tertiles indicating weakest hip abductor (chi-square = 6.140; p=0.046), knee extensor (chi-square = 6.562; p=0.038), and knee flexor (chi-square = 6.140; p=0.046) muscle strength had a significantly higher incidence of AKP. Hip and knee muscle strength was not significantly associated with shin injury. High school cross country runners with weaker hip abductor, knee extensor and flexor muscle strength had a higher incidence of AKP. Increasing hip and knee muscle strength may reduce the likelihood of AKP in high school cross country runners. 2b.

FY 1996 R/D project of industrial and scientific technologies contracted with NEDO. Report on R/D of organosilicon polymers; 1996 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Keisokei kobunshi zairyo no kenkyu kaihatsu (Keisokei kobunshi zairyo no kenkyu kaihatsu) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-01

Organosilicon polymers are highly innovative materials having high performance and novel functions, and they can be widely applied. The purpose of this study is to establish fundamental techniques for molecular design, synthesis, material processing and evaluation of organosilicon polymers having excellent electro- and photo-functions, and advanced heat-proof, fire-proof and mechanical properties. This R/D includes (1) R/D of electrical conducting materials by organosilicon polymers, (2) R/D of novel organosilicon polymers applicable to direct lithography, (3) R/D of new silicon-based polymer materials with electro-luminous function, and (4) R/D of silicon-based polymers for new photoconductive materials. In (1), synthesis of highly conjugated polymers is investigated. In (2), novel organosilicon polymeric materials have been developed, which would be applicable to direct lithography of electronic circuits, and which could contribute to simplification of the circuit formation process. In (3), the research aims at development of new silicon-based polymer materials with luminescent function which can be applied to the large size electro-luminescent display devices. In (4), new materials with visible light absorption have been synthesized through the molecular design and synthesis. The photo-carrier generation was observed. 107 refs., 86 figs., 23 tabs.

Fiscal 1997 report on the results of the technical development of super metal under consignment from NEDO. Technology to create ferrous mesoscopic structure control materials; Super metal no gijutsu kaihatsu (tetsukei mesoscopic soshiki seigyo zairyo sosei gijutsu) seika hokokusho (1997 nendo). Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko (NEDO) itaku kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The fiscal 1997 results were reported of the project on the technical development of super metal which draws out limit performance of ferrous metal and improves the recyclability. In the study of large-strain deformation, a study was carried out with the use of large-strain deformation of more than 50% per 1 pass (strain rate: 0.7 or more) and multi-phase structure. By the crystal microstructuring technology, a level was reached where approximately 1{mu}m crystal size can be obtained. In the study of high magnetic field utilization, the course of study of the structure control and microstructuring was chosen in the preliminary experiment using the existing 8 tesla magnet, and the design and fabrication of a new 12 tesla large-diameter magnet were conducted. In the study of material structure prediction, modeling of microstructuring by recrystallization and establishment of a material predicting method of micro/multi-phase/mixed-grain structures were made the subjects. In the analysis of the mesoscopic structure, the mesoscopic analysis was made of the 0.3C-9Ni steel microstructured by the large-strain deformation thermal processing, and it was shown that the reflective electronic image measured by varying accelerating voltage gives new structural information. 111 refs., 135 figs., 35 tabs.

FY 1997 R/D project of industrial and scientific technologies contracted with NEDO. Report on R/D of organosilicon polymers; 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Keisokei kobunshi zairyo no kenkyu kaihatsu (keisokei kobunshi zairyo no kenkyu kaihatsu) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The purpose of this study is to establish fundamental techniques for molecular design, synthesis, material processing and evaluation of organosilicon polymers having excellent electro- and photo-functions, and advanced heat-proof, fire-proof and mechanical properties. This R/D includes (1) R/D of electrical conducting materials by organosilicon polymers, (2) R/D of novel organosilicon polymers applicable to direct lithography, (3) R/D of new silicon-based polymer materials with electro-luminous function, and (4) R/D of silicon-based polymers for new photoconductive materials. In (1), synthesis method of regular polymers with a 3-D structure was developed. Non-volatile dopants were developed, and structures of polymer-dopant composites could be controlled. In (2), precise control of conductivity was examined. Material processing and evaluation techniques were also examined through stabilization of polysilane thin films, optimization of pattern forming conditions, and precision of patterns. In (3), new silicon-based polymers have been synthesized. In (4), two kinds of polymers have been synthesized for development of materials with high photo-carrier generation efficiency and high mobility. 72 refs., 71 figs., 22 tabs.

[Analysis of tension-distraction state in the shin bones fractures in conditions of external fixation with application of apparatuses with different spatially oriented supports].

Science.gov (United States)

Hutsuliak, V I

2014-09-01

In Autodesk Inventor 11 program, using method of end-capping elements, a three- dimensional computeric modelling of biomechanical systems of two models was conducted: I - "tibia - Ilizarov's apparatus with concentric location of supports"; II - "tibia - Ilizarov's apparatus with excentric location of supports". The loading, which was applied towards distal fragment in 6 standard degrees of freedom, was modelled for studying of the fixation rigidity of tibial fragments in these systems. Determination of the loading value in various directions, in which the fragment have had shifted by 1 mm, have constituted the main task of the investigation. In a model II a rigidity of the fragments fixation, in comparison with such in a model I, is bigger by 631.43% - while applying a compression loading, by 8.35 - 31.75% - the transversal one and by 19.72% - the rotation loading. While choosing the method of transosteal osteosynthesis of the shin bones the advantage, have the apparatuses with excentric location of supports, what secures the enhanced rigidity of the fragments fixation in comparison with such in apparatuses with concentric location of supports. Although, even in excentric location of supports in the apparatus the fixation rigidity is insufficient for early full loading of the traumatized extremity while walking. It is necessary to elaborate such apparatus, the form of which may be adopted toanatomic configuration of segment.

Tibial stress reaction presenting as bilateral shin pain in a man taking denosumab for giant cell tumor of the bone.

Science.gov (United States)

Lim, Sian Yik; Rastalsky, Naina; Choy, Edwin; Bolster, Marcy B

2015-12-01

Prolonged bisphosphonate use has been associated with increased risk of atypical femoral fractures. Very few cases of atypical femoral fractures have been reported with denosumab. We report a case of bilateral tibial stress reactions in a 60-year-old man with no history of osteoporosis who was on prolonged high-dose denosumab for the treatment of giant cell tumor of bone. He presented with a 3-month history of pain in his bilateral shins worsening with activity and improving with rest. Although initial radiographs were unremarkable, he was found to have changes consistent with a stress reaction on magnetic resonance imaging of the distal tibia. To our knowledge, bilateral tibial stress reactions have not been previously reported with anti-resorptive therapies (neither bisphosphonates nor denosumab). Our case is intriguing in terms of the development of stress reactions as a precursor to stress fractures which may also relate to atypical fractures. Our case suggests a possible association between denosumab use and stress reactions. Of note the indication for denosumab in our case was for the treatment of giant cell tumor of bone where the Food and Drug Administration (FDA) approved dose is substantially higher than the FDA approved dose for osteoporosis treatment. Although rare, clinicians should consider the possibility of stress fractures in patients on anti-resorptive medications such as denosumab, especially when a patient presents with new onset thigh pain, hip pain or pain over an area affecting the long bones. Evaluation by imaging of affected areas should be pursued to enable early detection and intervention, as well as prevention of morbidity and associated ongoing risk to the patient. Copyright © 2015 Elsevier Inc. All rights reserved.

Evaluation of diagnostic accuracy of conventional and digital periapical radiography, panoramic radiography, and cone-beam computed tomography in the assessment of alveolar bone loss

Directory of Open Access Journals (Sweden)

Wilton Mitsunari Takeshita

2014-01-01

Full Text Available Background: To evaluate the diagnostic accuracy of different radiographic methods in the assessment of proximal alveolar bone loss (ABL. Materials and Methods: ABL, the distance between cement-enamel junction and alveolar bone crest, was measured in 70 mandibular human teeth - directly on the mandibles (control, using conventional periapical radiography with film holders (Rinn XCP and Han-Shin, digital periapical radiography with complementary metal-oxide semiconductor sensor, conventional panoramic, and cone-beam computed tomography (CBCT. Three programs were used to measure ABL on the images: Image tool 3.0 (University of Texas Health Sciences Center, San Antonio, Texas, USA, Kodak Imaging 6.1 (Kodak Dental Imaging 6.1, Carestream Health ® , Rochester, NY, USA, and i-CAT vision 1.6.20. Statistical analysis used ANOVA and Tukey′s test at 5% significance level. Results: The tomographic images showed the highest means, whereas the lowest were found for periapical with Han-Shin. Controls differed from periapical with Han-Shin (P < 0.0001. CBCT differed from panoramic (P = 0.0130, periapical with Rinn XCP (P = 0.0066, periapical with Han-Shin (P < 0.0001, and digital periapical (P = 0.0027. Conventional periapicals with film holders differed from each other (P = 0.0007. Digital periapical differed from conventional periapical with Han-Shin (P = 0.0004. Conclusions: Conventional periapical with Han-Shin film holder was the only method that differed from the controls. CBCT had the closest means to the controls.

The application of FIMS to the Korean nuclear power plants

International Nuclear Information System (INIS)

Lee, Seung-Tae; Choi, Dae-Sik; Yang, Choong-Yeol

2010-01-01

The smart transmitters have been installed at selected systems of Ulchin Nuclear Units 5 and 6, and diagnosis and calibration for the smart transmitters have been carried out using the mobile calibration tools. In Shin-Kori Nuclear Units 1 and 2 and Shin-Wolsong Nuclear Units 1 and 2, which are under design and construction, the smart transmitters are installed in the places where total integrated radiation dose is below 10 Gy. FIMS (Field Instrument Management System) is applied to Shin-Kori Nuclear Units 1 and 2 and Shin-Wolsong Nuclear Units 1 and 2 to monitor and calibrate the smart transmitters remotely. FIMS is a centralized management system to allow the users to monitor the operating status, to perform the instrument diagnosis, and to carry out the calibration of locally mounted transmitters remotely during the commissioning and normal operation. (authors)

WWER reactor physics code applications

International Nuclear Information System (INIS)

Gado, J.; Kereszturi, A.; Gacs, A.; Telbisz, M.

1994-01-01

The coupled steady-state reactor physics and thermohydraulic code system KARATE has been developed and applied for WWER-1000 and WWER-440 operational calculations. The 3 D coupled kinetic code KIKO3D has been developed and validated for WWER-440 accident analysis applications. The coupled kinetic code SMARTA developed by VTT Helsinki has been applied for WWER-440 accident analysis. The paper gives a summary of the experience in code development and application. (authors). 10 refs., 2 tabs., 5 figs

Muscle spindles in elongation of the extremity: proprioceptive conflict or activity deficit?

Science.gov (United States)

Shevtsov, V I; Saifutdinov, M S; Chikorina, N K

2008-07-01

Comparison of electrophysiological and morphological parameters of shin muscles of experimental animals during shin elongation by Ilizarov's method indicates involvement of muscle spindles into reconstruction of the skeletal muscular tissue in response to its dosed distraction, which results in temporary deficit of specific somatosensory afferentation.

Evaluation of diagnostic accuracy of conventional and digital periapical radiography, panoramic radiography, and cone-beam computed tomography in the assessment of alveolar bone loss

Science.gov (United States)

Takeshita, Wilton Mitsunari; Vessoni Iwaki, Lilian Cristina; Da Silva, Mariliani Chicarelli; Tonin, Renata Hernandes

2014-01-01

Background: To evaluate the diagnostic accuracy of different radiographic methods in the assessment of proximal alveolar bone loss (ABL). Materials and Methods: ABL, the distance between cement-enamel junction and alveolar bone crest, was measured in 70 mandibular human teeth – directly on the mandibles (control), using conventional periapical radiography with film holders (Rinn XCP and Han-Shin), digital periapical radiography with complementary metal-oxide semiconductor sensor, conventional panoramic, and cone-beam computed tomography (CBCT). Three programs were used to measure ABL on the images: Image tool 3.0 (University of Texas Health Sciences Center, San Antonio, Texas, USA), Kodak Imaging 6.1 (Kodak Dental Imaging 6.1, Carestream Health®, Rochester, NY, USA), and i-CAT vision 1.6.20. Statistical analysis used ANOVA and Tukey's test at 5% significance level. Results: The tomographic images showed the highest means, whereas the lowest were found for periapical with Han-Shin. Controls differed from periapical with Han-Shin (P digital periapical (P = 0.0027). Conventional periapicals with film holders differed from each other (P = 0.0007). Digital periapical differed from conventional periapical with Han-Shin (P = 0.0004). Conclusions: Conventional periapical with Han-Shin film holder was the only method that differed from the controls. CBCT had the closest means to the controls. PMID:25191066

Silver nanoparticles decorated on a three-dimensional graphene scaffold for electrochemical applications

CSIR Research Space (South Africa)

Bello, A

2014-01-01

Full Text Available –87 [40] J. Lee, K. Novoselov, H. Shin, ACS Nano. 5 (2010) 608–612. [41] S.J. Chae, F. Güneş, K.K. Kim, E.S. Kim, G.H. Han, S.M. Kim, H.J. Shin, S. Yoon, J. Choi, M.H. Park, C.W. Yang, D. Pribat, Y.H. Lee, Adv. Mater. 21 (2009) 2328–2333. [42] L-R. Zhang....5 respectively. The low values could be attributed to the weak van der Waals interaction between Ag and graphene, which may change the structure of the graphene. The results here are similar to those obtained by Lee, Novoselov and Shin [40] who proposed...

African Journal of Biotechnology - Vol 10, No 5 (2011)

African Journals Online (AJOL)

Molecular detection of Edwardsiella tarda with gyrB gene isolated from pirarucu, Arapaima gigas which is exhibited in an indoor private commercial aquarium · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT. CH Choresca Jr, DK Gomez, SP Shin, DK Gomez, SP Shin, ...

Browse Title Index

African Journals Online (AJOL)

Items 7351 - 7400 of 11040 ... Vol 10, No 5 (2011), Molecular detection of Edwardsiella tarda with gyrB gene isolated from pirarucu, Arapaima gigas which is exhibited in an indoor private commercial aquarium, Abstract PDF. CH Choresca Jr, DK Gomez, SP Shin, DK Gomez, SP Shin, JH Kim, JE Han, JW Jun, SC Park.

Thermally Stable TiO2 - and SiO2 -Shell-Isolated Au Nanoparticles for In Situ Plasmon-Enhanced Raman Spectroscopy of Hydrogenation Catalysts.

Science.gov (United States)

Hartman, Thomas; Weckhuysen, Bert M

2018-03-12

Raman spectroscopy is known as a powerful technique for solid catalyst characterization as it provides vibrational fingerprints of (metal) oxides, reactants, and products. It can even become a strong surface-sensitive technique by implementing shell-isolated surface-enhanced Raman spectroscopy (SHINERS). Au@TiO 2 and Au@SiO 2 shell-isolated nanoparticles (SHINs) of various sizes were therefore prepared for the purpose of studying heterogeneous catalysis and the effect of metal oxide coating. Both SiO 2 - and TiO 2 -SHINs are effective SHINERS substrates and thermally stable up to 400 °C. Nano-sized Ru and Rh hydrogenation catalysts were assembled over the SHINs by wet impregnation of aqueous RuCl 3 and RhCl 3 . The substrates were implemented to study CO adsorption and hydrogenation under in situ conditions at various temperatures to illustrate the differences between catalysts and shell materials with SHINERS. This work demonstrates the potential of SHINS for in situ characterization studies in a wide range of catalytic reactions. © 2018 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.

Modern Times, New Birth and New Midwives: Midwifery in Japan, 1868–1930s

Directory of Open Access Journals (Sweden)

Aya Homei

2002-01-01

Full Text Available The shin-sanba, or medical ‘new-midwife’ who emerged during the Meiji period (1868- 1912 in Japan seems, looked at from the present, to have successfully replaced the ‘old-midwife’ (kyû-sanba and the increasingly criminalised ‘non-licensed midwife’ (mumenkyo-sanba, while midwifery was constantly developing as a modern medical profession. This paper suggests that the history of the midwife during the modern time was more complex than what we see today. First, the emergence and prosperity of shin-sanba were specific to the historical contingencies of modern Japan and the interplay of various groups of historical actors – hygiene officers, sankai (obstetrician-gynaecologists, other midwives, and ‘clients’. Second, through the course of the modern period, shin-sanba did not replace other types of midwives and in fact, different kinds of midwives did coexist. Finally, the existence and status of midwives greatly depended upon the laissez faire medical market, and the market’s realities often contradicted the medical rhetoric that favoured shin-sanba over other kinds of midwives.

Fiscal 1997 report on the results of the cooperative research project under consignment from NEDO on technology for simply setting-up of the molding conditions of engineering plastics; 1997 nendo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku (Engineering plastic no seikei joken kan`i settei gijutsu ni kansuru kenkyu kyoryoku jigyo seika hokokusho)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

A cooperative research project was carried out between Japan and Thailand with the aim of developing a system which can simply set up molding conditions using as elements the technology on mold design and injection molding in plastic parts production and the experiment/evaluation technology for making sure of the quality of molded products. In fiscal 1997, based on the basic plan worked out in the previous fiscal year, molding equipment, auxiliary equipment, mold, experimental equipment, injection molding CEA system, etc. were installed at Thailand`s BSID (Bureau of Supporting Industries Development). Supported by equipment manufacturers, the technical guidance was given for operation/maintenance/control of all equipment. At the same time, researchers were sent from Japan, and the joint research was started. Japan received three researchers from BSID for training of molding technology, injection molding CEA program use technology, and experimental evaluation technology. The engineering plastics used for study are polyacetal, polyamide and polycarbonate. 17 refs., 68 figs., 14 tabs.

Research report of FY 1997 on the industrial science and technology development. Technology development of super-metal (technology development of nano-amorphous structural control materials); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku seika hokokusho. Super metal no gijutsu kaihatsu (nano-amorphous kozo seigyo zairyo no gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Research and development of the innovative metals have been conducted, by which the weight reduction of members can be done by drastically improving the strength compared with conventional metals. For the high-rate cluster deposition and super plastic forming technologies, research and development of aluminum-based light-weight materials have been conducted, which provides excellent strength, toughness, and super plastic formability at room temperature. For the high-density energy utilization and control technology (amorphous-A), super-metals have been investigated as high dew point and corrosion resistance materials used for waste incinerators operated under the very severe conditions. These are expected to be applied to the apparatuses and equipment due to their excellent properties. For the controlled cooling technology (amorphous-B), super-metals with excellent soft magnetic characteristics and degree of shape freedom have been investigated for high performance and high efficiency devices including electric/electronic/communication devices, power transmission devices, and various industrial devices and parts. These are expected to contribute to the creation of new markets and the improvement of international competitive force. 123 refs., 160 figs., 33 tabs.

Endangered Species Management Plan for Fort Hood, Texas: FY06-10

Science.gov (United States)

2007-05-01

Texas red oak, post oak, Texas ash (Fraxinus texensis), shin oak, blackjack oak (Quercus marilandica), slippery elm (Ulmus rubra), cedar elm ...by Ashe juniper and Texas oak. Other important tree species included live oak, cedar elm (Ulmus crassifolia), Lacey oak (Quercus laceyi), Arizona...0.83 m (Cimprich 2005). Nest substrates include shin oak, Texas red oak, Texas redbud, Ashe juniper, Texas ash, Plateau live oak, cedar elm , rusty

Massage treatment and medial tibial stress syndrome; A commentary to provoke thought about the way massage therapy is used in the treatment of MTSS.

Science.gov (United States)

Fogarty, Sarah

2015-07-01

As students and practitioners we are taught about the treatment and causative factors of medial shin pain, in particular' shin splints' or the more recent term; medial tibial stress syndrome (MTSS). During the years there have been many theories, conjecture and misunderstandings about the mechanisms of 'shin splints/medial tibial stress syndrome' however the ramifications of these mechanisms on how massage treatment is delivered have not being discussed. The evidence for the treatment of MTSS is largely clinical with little evidence of any treatment being proven to be effective in treating MTSS. The aim of this article is to present a summary of the mechanisms of MTSS and a commentary to provoke thought about the way massage therapy is used in the treatment of MTSS based on these mechanisms. Copyright © 2014 Elsevier Ltd. All rights reserved.

Fiscal 1997 project on the R and D of industrial scientific technology under consignment from NEDO. Report on the results of the R and D of new software structuring models (R and D of micromachine cooperative control use software); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Shin software kozoka model no kenkyu kaihatsu (bisho kikai kyocho seigyoyo software no kenkyu kaihatsu) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

A R and D was conducted of software structuring models which ease the development and maintenance of software systems and meet diversification of needs. As for the study of the cooperative control use programming language, a R and D of agent oriented language Flage was carried out for expansion of language function, arrangement of network function, development of exercises, etc. As to the formulation of agent knowledge, proposed were processes to make a program from the specifications, and EVA, a mechanism in response to changes in the specifications of existing programs. In relation to the basic theory of cooperation system, a study was made mainly of object oriented attribute grammar OOAG as a model representing cooperative computation in software process as a rule group. Concerning the study of the situation recognition mechanism, researched were models of communication and reasoning among agents in cooperation. 187 refs., 107 figs., 23 tabs.

Fiscal 1996 project on the R and D of industrial scientific technology under consignment from NEDO. Report on the results of the R and D of technologies to invent original high-functional materials; 1996 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Kaihatsu Kiko itaku. Dokusoteki kokino zairyo sosei gijutsu no kenkyu kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Technologies were described of creating original high-functional materials. The paper presented the following two as fields of technology on which importance is to be placed for the future R and D from technological and socioeconomic points of view. In the field of new materials of living organism imitation type, remarkably high-performance/high-functional new materials are invented by imitating the precise function manifestation mechanism of the ultimate living organism in which a great variety of matters are in harmony with each other and manifest complicated and high-level functions. In the field of structural control/synthesis process technology, the paper is aimed at manifestation of newer and higher functions/performance and innovation of the synthesis process, and also at developing technology to precisely control structure and process of materials including surface and interface in correspondence with atomic/molecular to macro levels. Up to the present, conducted were an examination of autonomous response materials (the subtheme is a R and D of polymer/composite multi-stimuli-responsive materials) and a R and D of precise polymerization (control) polymer materials. 239 refs., 129 figs., 49 tabs.

Fiscal 1997 report on the R and D result of industrial science and technology. R and D on super metal (R and D on innovative raw metal materials); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku seika hokokusho. Super metal no gijutsu kaihatsu (kakushinteki kinzoku sokei zairyo no gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Study was made on the applicability of mechanical milling (MM) and mechanical alloying (MA) to Fe system alloys. Metastable austenitic stainless steels such as SUS316L and SUS304L form {alpha} phases by strain induced transformation due to MM, and are subjected to further plastic deformation. Nano-size fine structure was obtained through inverse transformation into austenite({gamma}) by heat treatment or high-temperature sintering of MM powder. Fine microduplex structure of 620nm in average crystal grain size was obtained for SUS316L. This material showed nearly 3.3 times higher 0.2% tensile proof stress, nearly 1.8 times higher tensile strength, and 35% higher elongation than conventional ingot steels. Solid solution powder of 12Cr-Mo-W ferritic steel was sintered by hot isostatic pressing (HIP) under low- temperature and ultrahigh-pressure conditions of 650degC and 588MPa. The as-HIP`ed sample and sample annealed at 800degC showed average {alpha} grain sizes of 33 and 50nm, respectively, and a strength twice as high as that of 12Cr steel. 97 refs., 60 figs., 18 tabs.

Fiscal 1997 report on the results of the introductory R and D of the New Sunshine Project under a consignment from NEDO. Introductory R and D of the supercritical fluid use technology; 1997 nendo `New Sunshine keikaku` sendo kenkyu kaihatsu Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Chorinkai ryutai riyo gijutsu sendo kenkyu kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The R and D of chemical reaction using supercritical fluids started in fiscal 1997. In the R and D of solvent reaction, as the research on polymer decomposition with supercritical water, studies were conducted of the mechanism of conversion reaction to chemical materials, cleavage mechanism of stable chemical bonds, and synthetic reaction in the supercritical state reaction field. In the research on oxidation reaction, as the study of complete oxidation in supercritical water for high efficiency energy recovery, studies of complete oxidation of liquid fuels, and complete oxidation of solid fuels. In the research on hydrogenation, studies of lightening of heavy oil in supercritical water, etc. In the R and D of the basic technology, studies of corrosion mechanism of metals in supercritical water, construction of the basic framework for technical database of supercritical fluids, etc. In the survey of technical trends and new research themes, the introductory R and D of element technology, etc. were conducted, and the results were described of the survey of technical trends and new research themes and the trend survey of overseas technology. 314 refs., 87 figs., 81 tabs.

Report on the results of the fiscal 1997 R and D under consignment from NEDO of photon measuring/processing technology (R and D of petroleum production system high-grade measuring/processing technology); 1997 nendo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku photon keisoku kako gijutsu (sekiyu seisan system kodo keisoku kako gijutsu kenkyu kaihatsu) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The R and D were conducted of high-strength and high-accuracy welding/joining technology using laser, technology to measure and assess the joining state of structures and defects around the surface of structures and inside structures by high accuracy and high resolution, and technology/equipment to generate a laser light source for the tool, which are all required to remarkably enhance safety/reliability of oil drilling facilities working in the severe environment. In fiscal 1997, as the R and D of oil production system high-grade measuring/processing technology, technical study, study of measures to be taken, operating experiment, assessment, examination, etc. were conducted on the following themes: 1) macroscopic processing technology (R and D of high-reliability laser welding technology), 2) non-destructive composition measuring technology (R and D of internal measurement and photoelectron spectroscopy using short-wavelength radiation), 3) tight-focusing all-solid-state laser technology (R and D of fiber laser), 4) tight-focusing all-solid-state laser technology (R and D of high-efficiency laser diode), and 5) comprehensive investigation of phonics engineering (investigation for photon-applied materials processing technology). 256 refs., 205 figs., 18 tabs.

Tempos modernos, novos partos e novas parteiras: o parto no Japão de 1868 aos Anos 1930

Directory of Open Access Journals (Sweden)

Homei Aya

2002-01-01

Full Text Available As shin-sanba, ou 'novas parteiras' medicalizadas, que apareceram durante o período Meiji (1868-1912 no Japão, parecem ter, aos olhos atuais, substituído rapidamente e sem conflito as 'velhas parteiras' (kyû-sanba e as cada vez mais criminalizadas 'parteiras não licenciadas' (mumenkyo-sanba, enquanto a profissão de parteira foi se desenvolvendo progressivamente como profissão médica moderna. Este artigo sugere que a história das parteiras na era moderna foi mais complexa do que aquilo que se imagina atualmente. Primeiro, o surgimento e a prosperidade das shin-sanba estiveram intrinsecamente ligados às contingências do Japão moderno e ao inter-relacionamento de vários grupos de atores históricos - autoridades da higiene, sankai (ginecologistas-obstetras, outras parteiras e 'clientes'. Segundo, ao longo da era moderna, as shin-sanba não substituíram outros tipos de parteiras; na verdade, os diferentes tipos co-existiram. Por fim, a existência e o status das parteiras dependeram em grande parte de um mercado de serviços de saúde marcado pelo laissez-faire, e as realidades desse mercado muitas vezes contradiziam a retórica médica que favorecia as shin-sanba em relação a outros tipos de parteiras.

Drug–drug interaction of microdose and regular-dose omeprazole with a CYP2C19 inhibitor and inducer

OpenAIRE

Park G; Bae SH; Park W; Han S; Park M; Shin S; Shin YG; Yim DS

2017-01-01

Gab-jin Park,1 Soo Hyeon Bae,1 Wan-Su Park,1 Seunghoon Han,1 Min-Ho Park,2 Seok-Ho Shin,2 Young G Shin,2 Dong-Seok Yim1,2 1Department of Clinical Pharmacology and Therapeutics, Seoul St Mary’s Hospital, PIPET (Pharmacometrics Institute for Practical Education and Training), College of Medicine, Catholic University of Korea, Seoul, South Korea; 2College of Pharmacy, Chungnam National University, Daejeon, South Korea Purpose: A microdose drug–drug interaction (DDI) study may be a ...

A System for Fast Navigation of Autonomous Vehicles

Science.gov (United States)

1991-09-01

AD-A243 523 4, jj A System for Fast Navigation of Autonomous Vehicles Sanjiv Singh, Dai Feng, Paul Keller, Gary Shaffer, Wen Fan Shi, Dong Hun Shin...FUNDING NUMBERS A System for Fast Navigation of Autonomous Vehicles 6. AUTHOR(S) S. Singh, D. Feng, P. Keller, G. Shaffer, W.F. Shi, D.H. Shin, J. West...common in the control of autonomous vehicles to establish the necessary kinematic models but to ignore an explicit representation of the vehicle dynamics

Erratum: Retraction Note to: Evolution of the Health of Concrete Structures by Electrically Conductive GFRP (Glass Fiber Reinforced Plastic) Composites

Science.gov (United States)

Shin, Soon-Gi

2018-03-01

This article [1] has been retracted at the request of the Editor-in-Chief. Concerns were raised regarding substantial duplications with previous articles published in other journals in which for some S.-G. Shin is one of the co-authors. After a thorough analysis we conclude that the concerns are valid. The article contains sections that substantially overlap with the following published article [2] (amongst others). S.-G. Shin has not responded to correspondence from the Editor about this retraction.

Primary cutaneous amyloidosis involving the external ears along with the classical sites

Directory of Open Access Journals (Sweden)

Khaitan Binod

2001-01-01

Full Text Available A 26- year- old woman had multiple itchy persistent gradually progressive papular lesions on the forearms and shins for 10 and 4 years respectively. She also noticed similar lesions on both the ears for 4 years. There were no systemic symptoms. Cutaneous examination revealed multiple 2-3 mm discrete firm hyperpigmented papules on the extensors of forearms, shins and earlobes. Skin biopsy from all sites demonstrated deposits of amyloid in the papillary dermis. The patient was treated with cyclophosphamide 50 mg daily orally. There was more than 50% improvement in her lesions.

Inability of Open-Field Autorefraction to Eliminate Accommodation in Preschoolers.

Science.gov (United States)

Kara, Caner; Petriçli, İkbal Seza

2017-09-01

To evaluate the effectiveness of the Shin-Nippon NVision-K 5001 autorefractometer (Rexxam Co. Ltd., Osaka, Japan) (also branded as the Grand Seiko WR-5100K; Grand Seiko Co. Ltd., Hiroshima, Japan) based on the open-field refractometry principle in refractive measurements of preschool children and to determine its ability to eliminate accommodation adequately. The refractive results of 114 preschool children who presented to the ophthalmology outpatient department for screening were evaluated. The measurements were obtained before and after cycloplegia with the Shin-Nippon NVision-K 5001 autorefractometer and after cycloplegia with retinoscopy, which is the gold standard. The results underwent vectorial transformation to produce the spherical equivalent (M) and two Jackson cross-cylinder (J0 and J45) values. All results were then subjected to statistical analysis. The difference between the measurements was evaluated with repeated measures analysis of variance. Included in the study were 106 preschool children (51 boys and 55 girls). The mean age was 5.3 ± 0.9 years (range: 3 to 6 years). Although statistically significantly more myopic results were obtained with non-cycloplegic measurements using the Shin-Nippon NVision-K 5001 autorefractometer (P .05). Cycloplegic J0 measurements were significantly lower (P .05). The Shin-Nippon NVision-K 5001/Grand Seiko WR-5100K open-field autorefractometer seems to be inadequate in eliminating accommodation in childhood. Measurements under cycloplegia continue to be the best method to ensure accurate results. [J Pediatr Ophthalmol Strabismus. 2017;54(5):311-318.]. Copyright 2017, SLACK Incorporated.

Liquid radioactive waste processing system in Improved OPR-1000

International Nuclear Information System (INIS)

Lee, Soonmin; Kim, Kiljung; Park, Jungsu

2008-01-01

The design goal of liquid rad waste system is to minimize the release of radioactive materials to the environment, the occupational radiation exposure to workers, and the solid rad waste volume generated from LRS operation. In 1998, KOPEC in conjunction with KHNP (Korea Hydro and Nuclear Power Co.) started a special task study which had been focused on the worldwide advanced technologies in the liquid rad waste process area by considering the design goals above. As a result of this task, KOPEC and KHNP finally decided to adopt a reverse osmosis processing method for Improved OPR-1000 in Korea. The advanced LRS design incorporating the R/O process has been introduced into Shin-Wolsong 1 and 2 (SWN 1 and 2) as well as Shin-Kori 1 and 2 (SKN 1 and 2), which are recently under construction, and also is adopted for Shin-Kori 3 and 4 (SKN 3 and 4) and Shin-Ulchin 1 and 2 (SUN 1 and 2), which are planned for the near future construction as the first APR-1400 type of Korean reactors. The LRS shop performance test for SKN 1 and 2 (Improved OPR-1000 R/O package system) was conducted by DOOSAN and DTS (Diversified Technologies Services, Inc) in January, 2008. The purpose of the test was to demonstrate the performance of actual R/O system to be installed in SKN 1 and 2 site. In this paper, overall system configuration and the shop performance test result is presented based on Improved OPR-1000 LRS R/O Package system

I and C success in Korea past and present projects and a view to the future

International Nuclear Information System (INIS)

Ridolfo, Charles F.

2009-01-01

Westinghouse Electric Company, LLC (WEC) has been providing advanced Instrumentation and Control (I and C) technology for the C E System 80, Korean Standard Nuclear Power Plant (KSNP), since the early 1990's. I and C equipment and technical support has been provided for a progression of these plants including Yonggwang Units 3,4,5,6, Ulchin Units 3,4,5,6, Shin Kori Units 1 and 2, Shin Wolsong Units 1 and 2, and most recently for Shin Kori Units 3 and 4. These I and C programs have been highly successful and have helped to contribute to the outstanding plant availability for the commissioned units at Yonggwang 3,4,5, and 6 and Ulchin 3,4,5, and 6; which are currently providing power on the grid. WEC has also recently delivered I and C equipment for Shin Kori Units 1 and 2 and Shin Wolsong Units 1 and 2 and is supporting the installation and startup of the equipment. In addition, WEC is in the initial design stages for providing an integrated protection system that will be deployed at Shin Kori Units 3 and 4 which are the first units to implement the APR1400; an advanced reactor of indigenous Korean design, which is based on the previous generation Optimized Power Reactor OPR1000. The success of the I and C programs has been the result of careful consideration of the appropriate technology to employ, applying comprehensive quality assurance measures, providing appropriate technical support and consultation services, implementation of a program of continued I and C logistic support, maintaining a professional and experienced I and C work force, and maintaining a strong and mutually supportive partnership with the Korea Power Engineering Company (KOPEC) and with Korea Hydro and Nuclear Power (KHNP). WEC takes great pride in its on going I and C partnership with Korea, which has included not only providing equipment and technical support services, but also completion of a comprehensive Technology Transfer program. This program was implemented to promote local 'elf

Analysis on Containment Response Following a LBLOCA of APR1400

International Nuclear Information System (INIS)

Han, Kyu Hyun

2016-01-01

The predictions are in good agreements with the final safety analysis report, which implies the containment integrity is maintained during or after an accident like loss of coolant accident. In this study, the CONTEMPT-LT/028 was used to calculate the pressure and temperature, and in the follow-up study, CONTAIN 2.0 will be used for the pressure and temperature predictions in APR1400 reactors. Shin-Hanul Units 1 and 2 may possess different characteristics of peak pressure and temperature in containment following a large break loss-of-coolant-accident. To assess the important performance independently and to compare with prediction results presented in the final safety analysis report (FSAR) of Shin-Hanul Units 1 and 2 might be helpful to regulatory review for identifying validity of the FSAR. The end of blowdown (EOB) time during a LOCA could largely affect the peak pressure and temperature in the containment. This paper provides CONTEMPT-LT/028 prediction of the peak pressure and temperature of Shin-Hanul Units 1 and 2 following a large break loss-of-coolant-accident and compares with licensee's prediction results.

Analysis on Containment Response Following a LBLOCA of APR1400

Energy Technology Data Exchange (ETDEWEB)

Han, Kyu Hyun [KINS, Daejeon (Korea, Republic of)

2016-05-15

The predictions are in good agreements with the final safety analysis report, which implies the containment integrity is maintained during or after an accident like loss of coolant accident. In this study, the CONTEMPT-LT/028 was used to calculate the pressure and temperature, and in the follow-up study, CONTAIN 2.0 will be used for the pressure and temperature predictions in APR1400 reactors. Shin-Hanul Units 1 and 2 may possess different characteristics of peak pressure and temperature in containment following a large break loss-of-coolant-accident. To assess the important performance independently and to compare with prediction results presented in the final safety analysis report (FSAR) of Shin-Hanul Units 1 and 2 might be helpful to regulatory review for identifying validity of the FSAR. The end of blowdown (EOB) time during a LOCA could largely affect the peak pressure and temperature in the containment. This paper provides CONTEMPT-LT/028 prediction of the peak pressure and temperature of Shin-Hanul Units 1 and 2 following a large break loss-of-coolant-accident and compares with licensee's prediction results.

Fiscal 2000 achievement report. Research and development of fast-acting innovative energy-environment technology (Development of fast-acting high-efficiency solar cell technology - Development of high-quality ingot manufacturing technology); 2000 nendo shin energy sangyo gijutsu sogo kaihatsu kiko itaku kenkyu gyomu seika hokokusho. Sokkoteki kakushinteki energy kankyo gijutsu kenkyu kaihatsu (Sokkogata kokoritsu taiyo denchi gijutsu kaihatsu - Kohinshitsu ingot seizo gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Research and development was conducted of a technology for manufacturing an ultrathin polycrystalline silicon solar cell capable of efficiency enhancement and cost reduction earlier than the types of polycrystalline solar cells now available on the market. In this fiscal year, a silicon melt/solidification experimenting apparatus was built for manufacturing high-quality silicon ingots. Using an apparatus with its performance similar to the newly built one, a preliminary experiment was conducted involving high-purity silicon ingot manufacturing. In the experiment, boron was added to 75 kg of silicon for semiconductor devices so that its resistivity may be 0.5 ohm-cm. The silicon was melted in a quartz mold, and then subjected to unidirectional coagulation at 0.13 mm/min that started at the bottom to proceed upward. The result was a silicon ingot 44 cm times 44 cm times 17 cm (height). The ingot thus obtained exhibited 0.4-0.8 ohm-cm in resistivity distribution. Solar cells produced from the ingot showed a conversion rate of 16.9%. (NEDO)

Fiscal 1996 report on the results of the R and D under a consignment from NEDO of the environment friendly type production technology. High-functional chemical synthesis bioreactor (for public); 1996 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Kankyo chowagata seisan gijutsu (kokino kagaku gosei bioreactor) kenkyu kaihatsu seika hokokusho (kokaiyo)

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

For the purpose of developing production technology of chemical substances which are resource conservative, energy saving and less in environmental loads, a R and D was conducted of a high-functional chemical synthesis bioreactor. The paper reported the results of fiscal 1996. As for proliferation control breeding technology, relating to the switch control technology of proliferation related genes by regulatory factors, the effectiveness on an incubator level was demonstrated, and at the same time improvement of reactor performance in using this technology was studied on paper. As to the manifestation control breeding technology, the actual design of the development of manifestation promotion technology by bent DNA, etc. was proceeded with, and at the same time the following were commenced: selection of bent DNA, confirmation of bent characteristics, and work of vector construction using candidate bent DNA. Further, the simple assessment system of manifestation vectors was constructed. In the development of bioreactor system technology, the actual design was started of the two-stage culture continuance system which separated proliferation and enzyme production. 48 refs., 41 figs., 6 tabs.

Fiscal 1997 R and D project on industrial science and technology under a consignment from NEDO. R and D of the ultimate manipulation technology of atoms and molecules; 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo gijutsu Sogo Kaihatsu Kiko itaku. Genshi bunshi kyokugen sosa gijutsu no kenkyu kaihatsu seika hokokusho (genshi bunshi kyokugen sosa gijutsu no kenkyu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

This paper describes R and D of the ultimate manipulation technology of atoms and molecules (atom technology). The R and D aims at establishment of observation/manipulation technology of atoms and molecules as common basic technology in various industrial fields such as new material, electronics, bio-technology and chemistry. The R and D thus aims at establishment of observation/manipulation of solid surfaces and DNA organic molecules, formation of fine structures of atomic surface arrangement, and calculation/ simulation for predicting a reaction theorem of atom and molecule surfaces. In fiscal 1997, research was made on improvement and development of computer simulation environment, and description of an excited state of electrons by Green function. Establishment of a construction method and computation code is under investigation for pseudo- potential dependent on excitation energy. Survey was made on research trends of the atom technology by visiting overseas academic societies and institutions. International Symposium on Atom Technology was also held in Tokyo in Nov. 1997

FY 1997 R/D project of industrial and scientific technologies contracted with NEDO. Report on technology development of utilization of biological resources such as bioconsortia (development of analytical techniques of bioconsortia); 1997 nendo sangyo gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Fukugo seibutsukei nado seibutsu shigen riyo gijutsu kaihatsu (fukugo seibutsukei kaiseki gijutsu no kaihatsu) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Bioconsortia are microbial composites composing of more than two kinds of microorganisms with special functions. To utilize their advanced functions, some techniques have been developed for analyzing their functions and interactions, and for identification, separation and incubation of the constituent microbial groups. In FY 1997, an investigation was made on technology trends, domestic researchers, and research topics related to bioconsortia. To manage and promote the progress of research at the National Institute of Bioscience and Human-Technology where the centralized management of this project is conducted, meetings are held once a month to examine the progress at the institute, in which reports are made and discussions are held on how each research item is progressing. In addition, meetings of the committee to promote research are held every other month to consider and examine measures required for promoting the research. Re-entrustment of research has been made on two subjects, i.e., `Studies on biological significance of symbiotic microorganisms` by Prof. Ishikawa of the University of Tokyo, and `Study on the relationship between the biosynthesis of useful terpenic materials of plant origin and the differentiation of plant tissues, and their effective production by plant cell cultures` by Prof. Inoue of Gifu Pharmaceutical University. 27 refs., 13 figs., 1 tab.

Electric Power Research in 1991

International Nuclear Information System (INIS)

1991-05-01

This book of contents are a study of desalination by Kim, Young Bu, a study on efficiency test for nuclear power security by Jo, Sung Je; Ann, Nam Sung; Kim, Ho Gi, augmentation of EMS and RYU by Jung, Tae Hoe; Shin, Young Chuel, research on application for electric cars by Yu, Ann Gue, practical use oft robot for nuclear industry by Woo, He Gone; Shin, Hen Beom, a study on the characteristics of coolant structure in generator by Choi, Beng Hwan; Song, Young Chel; Kim, Jong Hark, and research of penetration rate of appliances by Park, Hong Ho; Kim, Beng Cheal; Kim, Dong Hwen.

Improvements in Logic Diagram of Computerized Procedure System of APR1400

Energy Technology Data Exchange (ETDEWEB)

Kang, Sungkweon; Seong, Nokyu [KHNP CRI, Daejeon (Korea, Republic of)

2016-10-15

The Computerized Procedure System (CPS) has been improved since it is installed in Shin-Kori 3 and 4 Nuclear Power Plants. It is one of operating support systems of digital Main Control Room (MCR) and provides many functions to operators in executing the procedure. CPS can effectively remove the human errors by supporting the procedure flow and logic diagram. This paper describes the logic diagram of CPS of reference power plant and shows the improved logic diagram of CPS of Shin-Kori unit 5 and 6. This paper describes the current logic diagram of CPS and suggests improved design for logic diagram. The improved logic diagram shall be validated through human factors engineering verification and validation. The improved design will help operators execute the computerized procedure fast and remove the human error.

Bruises

Science.gov (United States)

... or 14 days, it turns yellowish-brown or light brown. Finally, after about 2 weeks, your bruise ... bump, bang, crash, or smash into you — it's smart to wear protective gear like pads, shin guards, ...

Fiscal 1996 report on the results of the study under a consignment from NEDO of environmental friendly type metal base-materials recycling utilization basic technology and element/overall process. For public; 1996 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko kyodo kenkyu itaku. Kankyo chowagata kinzokukei sozai kaisei riyo kiban gijutsu no kenkyu: yoso sogo process kenkyu seika hokokusho (kokaiyo)

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

A study of `the next generation new iron steel making process` was conducted in which impurity elements in scrap are removed and recycled into high quality steel making materials, and at the same time total emissions are reduced during the process from scrap melting to steel making. The paper reported the fiscal 1996 results. In the study of the scrap recycling process, conducted were a study of the total system to remove impurities in the high temperature preheating furnace, a large scale experiment of de-coaling combined type de-coppering/de-tinning under reduced pressure of iron melting, a study of recycling technology of dust to the scrap melting furnace, etc. In the study on preheating/melting technology, a study of the scrap melting furnace of high-productivity/low-energy vertical type, a study of the scrap preheating method using the packed bed type preheating furnace, a study on the flue gas control at the time of preheating/melting, a study of the fast assessment method for organic compounds in flue gas, etc. In the evaluation of the total system, a study of preheating/melting/environmental systems using experimental plants. 20 refs., 23 figs., 10 tabs.

Report on the results of research and development under a consignment from NEDO of glycoconjugate production utilizing technologies. Development of technologies to fix and effectively utilize carbon dioxide by applying glycoconjugates; 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Fukugo toshitsu seisan riyo gijutsu no kenkyu kaihatsu (fukugo toshitsu oyo nisanka tanso koteika yuko riyo gijutsu kaihatsu) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

This paper reports research results in fiscal 1997 for the `research and development of glycoconjugate production utilizing technologies`. In synthesizing, utilizing and remodeling technologies for glycoconjugates by means of chemical synthesis, studies were performed on developing methods to synthesize Gal {beta}1-3Gal NA(c {alpha})1-0-Serine in preparative scale, synthesizing high mannose type sugars of natural type without protection groups, and linking GlcNA or GalNAc onto partial peptide of fibroblast growth factor (FGF). In synthesizing, utilizing and remodeling technologies for glycoconjugates by using biological methods, studies were carried out, with regard to glycoconjugate synthesizing, utilizing and remodeling technologies utilizing animal cells, on identifying sugar structures of IFN-{gamma} produced from CHO cell line, and isolating CHO cell lines introduced with genes of sugar transferred enzyme GnTIV and/or GnTV. Furthermore, studies were conducted on glycoconjugate synthesizing, utilizing and remodeling technologies utilizing microorganisms, and glycoconjugate structure analyzing technologies. In addition, overall investigation was made on glycoconjugate production utilizing technologies. 113 refs., 76 figs., 18 tabs.

Industrial and scientific technology research and development project in fiscal 1997 commissioned by the New Energy and Industrial Technology Development Organization. Research and development of superconducting materials and transistors (report on overall investigation of superconductive devices); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Chodendo zairyo chodendo soshi no kenkyu kaihatsu (chodendo soshika gijutsu kaihatsu seika hokokusho)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

This paper describes development of superconducting new function transistors. Fiscal 1997 as the final year of the project advanced improvement in such transistor-using processes as formation and micro-processing of superconducting thin films to show enhancement in characteristics of high-temperature superconducting transistors and possibility of their application utilizing their high speed motions. Furthermore, fundamental technologies were studied with an aim on junction transistors to be applied as circuits. For field effect transistors, evaluation was performed on critical current distribution of step-type particle boundary junction to make it possible to evaluate characteristics of hundreds of transistors. At the same time, a magnetic flux quantum parametron gate with three-layer structure was fabricated to identify its operation. In superconducting-base transistors, strong reflection was recognized on temperature dependence of permittivity of an Nb-doped strontium titanate substrate used for collectors, by which barrier height was reduced. In the junction transistor and circuit technology, isotropic ramp-edge junctions were fabricated, and so was a frequency divider circuit with single magnetic flux quantum mode operation for evaluating high-speed response characteristics. High time resolution current was observed successfully by using a high-temperature superconducting sampler system. 148 refs., 127 figs., 4 tabs.

Fiscal 1997 R and D project on industrial science and technology under a consignment from NEDO. R and D of the synthesis and processing of advanced biomaterials (fixation and effective utilization of carbon dioxide using peptides); 1997 nendo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Senshin bio zairyo no sosei kako gijutsu no kenkyu kaihatsu (peptide oyo nisanka tanso koteika yuko riyo gijutsu) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

In fiscal 1997, study was made on formation of peptides with a biogenic function and molecular recognition function, and peptide materials. The existing automatic design technique of peptides including non-natural amino acids was applied to design of complementary peptides of proteins with known structures to optimize a development technique of ligand. Practical function of peptides as advanced receptor ligand was verified by applying the existing conformation control technique to stable holding of peptide active conformation. Creation of bio-materials, and development of preparation technology of bio-substrates and materializing technology of functional molecular materials were carried out. To construct an electron transfer system by self- organized body of peptides formed on a substrate, a peptide molecular device was prepared and verified using linkers. To use peptides as photoelectron functional molecule, metallized peptide with main helix structure was prepared. The possibility of molecular materials with a fixation function of CO2 was examined. A high-sensitivity bio-sensor was also mentioned. 75 refs., 130 figs., 25 tabs.

Fiscal 1997 project on the R and D of industrial scientific technology under consignment from NEDO. Report on the results of the R and D of silicon-based polymeric materials (development of liquid methane fueled aircraft engine); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo / Shin energy Sangyo gijutsu Sogo Kaihatsu Kiko itaku. Keisokei kobunshi zairyo no kenkyu kaihatsu (methane nenryo kokukiyo engine kaihatsu) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

This R and D aims at establishing the basic technology on the molecular design, synthesis, use as materials, and evaluation of silicon-based polymers, of which excellent electronic/optical functions, high heat-resistance/combustion-resistance/dynamic characteristic are expected. The paper introduced the results of the fiscal 1997 R and D of them. The themes are as follows: technology of synthesis of silicon-based polymeric materials with sea-island microstructures, interstitial type structure forming technology, composite materials with organometallic complexes and silicon-based polymers, silicon-based polymer structural materials with ring structures, optimization of the Wurtz`s synthesis method of silicon-based polymers, unsaturated and hypercoordinate organosilicic compounds, function of silicon-based polymers, synthesis and polymerization of new silicon-based monomers, development of a new synthesis method of polysilane and the function, development of new application of silicon-based polymers in imaging devices for recording/memory/display of information, molecular design of {pi}-conjugate and {sigma}-conjugate compounds including silicon, and conformation and electronic state of silicon-based polymeric materials. 186 refs., 141 figs., 68 tabs.

Fiscal 1997 R and D project under a consignment from NEDO. R and D of the femtosecond technology (R and D of the monitoring system using high-intensity X-ray pulse for power plants); 1997 nendo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Femto byo technology no kenkyu kaihatsu (kokido X sen pulse riyo hatsuden shisetsu monitoring system no kenkyu kaihatsu) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

This paper reports the result on R and D of the femtosecond technology in fiscal 1997. Ultrahigh-speed electronic technology is indispensable for industrial basic technologies supporting the advanced information society in the 21st century. Control technology of photonic and electronic states in a femtosecond region is essential. In R and D of metrological technology using ultra-short light-pulses, study was made on generating and controlling technology for ultra- short light/electron beam pulses. Ti-sapphire mode-locked laser was prepared, and it was found that time-fluctuation of mode-locked laser pulses is measurable up to 100 femtosecond level. As measures against an instability of gain-switching semiconductor laser, light injection from the outside was effective. The stable directivity of laser beam was obtained by regenerative amplifier, while less temperature variation of an optical switch was necessary to stabilize energy. To generate femtosecond high-intensity X-ray pulse by collision of laser and electron beams, it was confirmed that sub- picosecond synchronization is possible by RF and picosecond laser synchronization circuit. 48 refs., 89 figs., 11 tabs.

Fiscal 1997 R and D project on industrial science and technology under a consignment from NEDO. R and D of the superconducting material and device (technical development of the Josephson device hybrid system); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Chodendo zairyo chodendo soshi no kenkyu kaihatsu (Josephson soshi hybrid system no gijutsu kaihatsu) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

In order to establish basic technology for hybrid systems of superconducting and semiconducting devices, study was made on ultrahigh speed and low energy consumption properties of Josephson devices. As Josephson IC technology, a logical circuit, ring network, memory circuit, and oxide superconductor logical circuit were studied. As superconducting hybrid system technology, a Josephson device- semiconductor device interface, formation technology of signal transmission lines, and Josephson-MOS IC technology were developed. In fiscal 1997, as Josephson IC technology, switch motion of 4GHz in clock frequency was achieved by new high-density wiring process. Integration of some semiconducting processor elements, junction of surface- stabilized superconducting thin films, and motion of combination structure of some SQUIDs were also confirmed. On the hybrid system, voltage conversion operation of all interfaces was confirmed. Proper logical operation of the Josephson device hybrid circuit was also confirmed. 95 refs., 90 figs., 5 tabs.

Fiscal 1996 report on the results of the R and D under a consignment from NEDO of the technology to fix and effectively use carbon dioxide using bacteria and microalgae (for public); 1996 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku (saikin sorui nado riyo nisanka tanso koteika yuko riyo gijutsu kenkyu kaihatsu seika hokokusho (kokaiyo))

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

For the purpose of contributing to the solution to the global environmental problem, a technology is developed in which by searching for/breeding/developing bacteria, etc. which conduct photosynthesis highly effectively, CO2 is fixed and recycled. The fiscal 1996 R and D is outlined as the utilization of bacteria, microalgae, etc. Obtained were microalgae exceeding the conventional strains in CO2 fixation ability, and bacteria/microalgae excellent in production of polysaccharides, hydrocarbon, lipid, biological active substances, etc. The fundamental study was continued of CO2 integrated enzyme function/reaction system as molecular biological breeding. In the cell fusion, a set-up of conditions for green algae was started. For the confirmation of performance of high dense/quantity culture technology using solar light, further improvement of performance and systematization, 200L scale testing equipment was manufactured. It is a collective reactor and enabled study of ventilation/agitation and control of light strength. A reactor analysis model was constructed. Also including the conversion into useful substances, energy/material balance was systematically studied. Collection of technical literature and information exchanges were made in Japan and overseas. 276 refs., 475 figs., 156 tabs.

Bone X-Ray (Radiography)

Medline Plus

Full Text Available ... are the limitations of Bone X-ray (Radiography)? What is Bone X-ray (Radiography)? An x-ray ( ... leg (shin), ankle or foot. top of page What are some common uses of the procedure? A ...

Bone X-Ray (Radiography)

Medline Plus

Full Text Available ... the hand, wrist, arm, elbow, shoulder, spine, pelvis, hip, thigh, knee, leg (shin), ankle or foot. top ... dislocations. In elderly or patients with osteoporosis, a hip fracture may be clearly seen on a CT ...

Plaadid / Tiiu Laks

Index Scriptorium Estoniae

Laks, Tiiu, 1984-

2007-01-01

Uutest heliplaatidest The Shins "Wincing The Night Away", A Am Kloot "BBC Radio 1Peel Sessions", Tim Finn "Imaginary Kingdom", Kling Klang "The Esthetik of destruction", "25 Avenue le bar plaza Athenee Paris", Paul Weller "Hit Parade"

Bone X-Ray (Radiography)

Medline Plus

Full Text Available ... body, including the hand, wrist, arm, elbow, shoulder, spine, pelvis, hip, thigh, knee, leg (shin), ankle or ... of a fracture. guide orthopedic surgery, such as spine repair/fusion, joint replacement and fracture reductions. look ...

The incidence and nature ofinjUries in first-league and provincial ...

African Journals Online (AJOL)

muscle tears,'· shoulder injuries,' talotibial exostoses, patellar tendonitis,,. bruised heels and shin splints!"·. The most frequently reported batting ..... the treatment and rehabilitation of injured cricketers need to be aware of the large number of ...

Bone X-Ray (Radiography)

Medline Plus

Full Text Available ... wrist, arm, elbow, shoulder, spine, pelvis, hip, thigh, knee, leg (shin), ankle or foot. top of page ... the patient standing upright, as in cases of knee x-rays. A portable x-ray machine is ...

[Diseases and overuse injuries of the lower extremities in long distance runners].

Science.gov (United States)

Tschopp, M; Brunner, F

2017-06-01

Running is one of the most popular sports worldwide, with running events attracting hundreds of thousands of runners of all age groups. Running is an effective way to improve health but is also associated with a high risk of injuries. Up to 50% of regular runners report having more than one injury each year. Some injuries are caused by an accident but most are caused by overuse. The most frequent diagnoses are patellofemoral pain syndrome, tibial stress syndrome (shin splint), Achilles tendinopathy, iliotibial band friction syndrome (runner's knee), plantar fasciitis and stress fractures of the metatarsals and tibia. The knee is the most frequently injured joint in runners at all distances. Hamstring injuries are typically acute resulting in a sudden, sharp pain in the posterior thigh. Hip injuries are less common but it can be more difficult to make the correct diagnosis and treatment is more complex. Clinicians confronted by runners with shin pain must distinguish between stress fractures of the tibia, tibial stress syndrome (shin splints) and chronic exertional compartment syndrome. Foot and ankle injuries are the most common injuries reported by long distance and marathon runners. Excess body weight and the number of kilometers run per week are high risk factors for injuries. The roles of other factors, such as shoes, stretching and biomechanics are less clear. A detailed anamnesis and physical examination are important for the correct diagnosis or the necessity for further diagnostic imaging and subsequent therapy.

Erratum: Retraction Note to: Experimental and Simulation Studies on Grain Growth in TiC- and WC-Based Cermets During Liquid Phase Sintering

Science.gov (United States)

Shin, Soon-Gi

2018-03-01

This article [1] has been retracted at the request of the Editor-in-Chief. Concerns were raised regarding substantial duplications with previous articles published in other journals in which S.-G. Shin is one of the co-authors.

Energy efficient approach for transient fault recovery in real time ...

African Journals Online (AJOL)

DR OKE

Keywords: DVS, Fault tolerance, Real Time System, Transient Fault. ... in which missing the deadline may cause a failure and soft real time system, ..... Pillai, P., Shin, K., Real-time dynamic voltage scaling for low-power embedded operating ...

Lateral collateral ligament (image)

Science.gov (United States)

The lateral collateral ligament connects the end of the femur (thigh) to the top of the fibula (the thin bone that runs next to the shin bone). The lateral collateral ligament provides stability against varus stress. Varus stress ...

Popliteal artery entrapment syndrome misdiagnosed as chronic ...

African Journals Online (AJOL)

A 21-year-old provincial rugby player complained of exercise- induced pain in both ... damage was present and after bilateral surgical release a few months apart he ... medial tibial stress syndrome, shin splints and stress fractures. Vascular ...

Separation of two major chalcones from Angelica keiskei by high-speed counter-current chromatography.

Science.gov (United States)

Kil, Yun-Seo; Nam, Joo-Won; Lee, Jun; Seo, Eun Kyoung

2015-08-01

Angelica keiskei (Shin-sun cho) is an edible higher plant with the beneficial preventive effects on cancer, hypertension, and coronary heart disease. Two bioactive chalcones of Shin-sun cho, xanthoangelol (1) and 4-hydroxyderricin (2), were separated simultaneously by using high-speed counter-current chromatography with a two-phase solvent system composed of n-hexane-EtOAc-MeOH-H2O (9:5:9:4). Only nonconsuming processes, solvent fractionations and Sephadex LH-20 column chromatography, were conducted as presteps. Xanthoangelol (1, 35.9 mg, 99.9 % purity at 254 and 365 nm) and 4-hydroxyderricin (2, 4.4 mg, 98.7 % purity at 254 nm and 98.8 % purity at 365 nm) were successfully purified from 70 mg of the processed extract from A. keiskei. The structures of two compounds were confirmed by (1)H- and (13)C-NMR analysis.

Interface between Core/TH Model and Simulator for OPR1000

Energy Technology Data Exchange (ETDEWEB)

Hwang, Do Hyun; Lee, Myeong Soo; Hong, Jin Hyuk; Lee, Seung Ho; Suh, Jung Kwan [KEPRI, Daejeon (Korea, Republic of)

2009-05-15

OPR1000 simulator for ShinKori-Unit 1, which will be operated at 2815MWt of thermal core power, is being developed while the ShinKori-Unit 1 and 2 is being built. OPR1000 simulator adopted the RELAP5 R/T code, which is the adaptation of RELAP5 and NESTLE codes to run in real-time mode with graphical visualization, to model Nuclear Steam Supply System (NSSS) Thermal-Hydraulics (TH) and Reactor Core. The RELAP5 is an advanced, best estimate, reactor TH simulation code developed at Idaho National Engineering and Environment Laboratory(INEEL) and the NESTLE is a true two-energy group neutronics code that computes the neutron flux and power for each node at every time step. As a simulator environment, the 3KEYMASTER{sup TM}, a commercial environment tool of WSC is used.

Reviews on the Japanese Patent Applications Regarding Nickel/Metal Hydride Batteries

Directory of Open Access Journals (Sweden)

Taihei Ouchi

2016-06-01

Full Text Available The Japanese Patent Applications filed on the topic of nickel/metal hydride (Ni/MH batteries have been reviewed. Patent applications filed by the top nine battery manufacturers (Matsushita, Sanyo, Hitachi Maxell, Yuasa, Toshiba, FDK, Furukawa, Japan Storage, and Shin-kobe, five component suppliers (Tanaka, Mitsui, Santoku, Japan Metals & Chemicals Co. (JMC, and Shin-Etsu, and three research institutes (Industrial Research Institute (ISI, Agency of Industrial Science and Technology (AIST, and Toyota R & D were chosen as the main subjects for this review, based on their production volume and contribution to the field. By reviewing these patent applications, we can have a clear picture of the technology development in the Japanese battery industry. These patent applications also provide insights, know-how, and future directions for engineers and scientists working in the rechargeable battery field.

A case study on robust optimal experimental design for model calibration of ω-Transaminase

DEFF Research Database (Denmark)

Daele, Timothy, Van; Van Hauwermeiren, Daan; Ringborg, Rolf Hoffmeyer

the experimental space. However, it is expected that more informative experiments can be designed to increase the confidence of the parameter estimates. Therefore, we apply Optimal Experimental Design (OED) to the calibrated model of Shin and Kim (1998). The total number of samples was retained to allow fair......” parameter values are not known before finishing the model calibration. However, it is important that the chosen parameter values are close to the real parameter values, otherwise the OED can possibly yield non-informative experiments. To counter this problem, one can use robust OED. The idea of robust OED......Proper calibration of models describing enzyme kinetics can be quite challenging. This is especially the case for more complex models like transaminase models (Shin and Kim, 1998). The latter fitted model parameters, but the confidence on the parameter estimation was not derived. Hence...

Interface between Core/TH Model and Simulator for OPR1000

International Nuclear Information System (INIS)

Hwang, Do Hyun; Lee, Myeong Soo; Hong, Jin Hyuk; Lee, Seung Ho; Suh, Jung Kwan

2009-01-01

OPR1000 simulator for ShinKori-Unit 1, which will be operated at 2815MWt of thermal core power, is being developed while the ShinKori-Unit 1 and 2 is being built. OPR1000 simulator adopted the RELAP5 R/T code, which is the adaptation of RELAP5 and NESTLE codes to run in real-time mode with graphical visualization, to model Nuclear Steam Supply System (NSSS) Thermal-Hydraulics (TH) and Reactor Core. The RELAP5 is an advanced, best estimate, reactor TH simulation code developed at Idaho National Engineering and Environment Laboratory(INEEL) and the NESTLE is a true two-energy group neutronics code that computes the neutron flux and power for each node at every time step. As a simulator environment, the 3KEYMASTER TM , a commercial environment tool of WSC is used

Cash Incentives and Military Enlistment, Attrition, and Reenlistment

Science.gov (United States)

2010-01-01

indebted to personnel at the Defense Manpower Data Center for providing data, including Andrea Dettner, Jesica Kopang, Hannah Shin, Scott Seggerman...especially Dennis Drogo, John Jessup, Christopher Arendt , and Robert Clark. xxvii Abbreviations AFQT Armed Forces Qualification Test AOS additional

76 FR 18246 - Notice of Receipt of Complaint; Solicitation of Comments Relating to the Public Interest

Science.gov (United States)

2011-04-01

... Certain Handheld Electronic Computing Devices, Related Software, and Components Thereof, DN 2790; the... United States after importation of certain handheld electronic computing devices, related software, and...; Foxconn International Holdings Ltd. of Cheung Sha Wan Kowloon, Hong Kong; and Inventec Corporation of Shin...

ORIGINAL ARTICLE

African Journals Online (AJOL)

User

Many plants are used as treatment for micro- bial infections in ... cancer and nitric oxide inhibition properties (Shin et al., 2004; Takaya et ... night at 37˚C in nutrient broth and fungus was cul- ... also facilitate the isolation of active antimicrobial.

Using technology to scaffold progressive teaching

DEFF Research Database (Denmark)

Bundsgaard, Jeppe

2018-01-01

An encouraging consensus has arisen in recent decades among researchers and policy organizations in favor of more progressive teaching practices like Inquiry Based Science Education (B. Barron & Darling-Hammond, 2010; Rocard et al., 2007) and Project Based Learning (Krajcik & Shin, 2014; OECD Pub...

Microstructural and optical properties of transparent conductive ZnO ...

Indian Academy of Sciences (India)

Administrator

College of Materials Science and Engineering, Shaanxi University of Science and Technology, China 710021 ..... (in press). Gorla C R, Emanetoglu N W, Liang S, Mayo W E and Lu Y. 1999 J. Appl. Phys. ... Shin E W and Park C 2007 Mater.

CHINA'S INFLUENCE IN AFRICA: CURRENT ROLES AND ...

African Journals Online (AJOL)

RAYAN_

2016-02-10

Feb 10, 2016 ... troubled countries through its business with these countries”, see Peter Brookes and Ji H. Shin, “China's Influence ... 1.77*1014 m3. 7840 billion m3. 77.4 billion ... 30 April 2015 and latest statistics from China Customs

Effect of four varieties of mulberry on biochemistry and nutritional physiology of mulberry pyralid, Glyphodes pyloalis Walker (Lepidoptera: Pyralidae

Directory of Open Access Journals (Sweden)

M. Oftadeh

2014-08-01

Full Text Available The effects of four mulberry varieties (Kenmochi, Ichinose, Shin Ichinose, Mahalii on nutritional indices and digestive proteolytic and amylolytic activities of Glyphodes pyloalis Walker (Lepidoptera: Pyralidae were determined at 24±1°C, 75±5% RH and a photoperiod of 16:8 L:D. Fifth instar larvae reared on Shin Ichinose showed the highest efficiency of conversion of digested food and efficiency of conversion of ingested food (3.82±0.16% and 3.11±0.07%, respectively. Approximate digestibility values of the fourth instar larvae were highest (95.23±0.73% and lowest (91.77±1.45% on Kenmochi and Shin Ichinose, respectively. The fifth instar larvae fed on Kenmochi had the highest consumption index (4.6±0.73 and lowest relative growth rate (0.03±0.10, respectively. Our results showed that the highest protease activity in optimal pH was on Malalii variety (0.97 U/mg and the lowest was on Kenmochi (0.75 U/mg. In addition, the highest amylase activity in optimal pH was on Mahalii (0.17 U/mg and lowest on Kenmochi (0.103 U/mg. Specific proteolytic analysis showed that larvae feeding on Mahalii had the highest activity of trypsin and elastase (2.30 and 2.13 U/mg, respectively. This research showed that plasticity in food utilization and enzyme activity is functionally relevant to host plant cultivars. The results of nutritional indices and activity of digestive enzymes indicated that Kenmochi was an unsuitable host for feeding of Glyphodes pyloalis.

Toward Smart Footwear to Track Frailty Phenotypes—Using Propulsion Performance to Determine Frailty

Directory of Open Access Journals (Sweden)

Hadi Rahemi

2018-06-01

Full Text Available Frailty assessment is dependent on the availability of trained personnel and it is currently limited to clinic and supervised setting. The growing aging population has made it necessary to find phenotypes of frailty that can be measured in an unsupervised setting for translational application in continuous, remote, and in-place monitoring during daily living activity, such as walking. We analyzed gait performance of 161 older adults using a shin-worn inertial sensor to investigate the feasibility of developing a foot-worn sensor to assess frailty. Sensor-derived gait parameters were extracted and modeled to distinguish different frailty stages, including non-frail, pre-frail, and frail, as determined by Fried Criteria. An artificial neural network model was implemented to evaluate the accuracy of an algorithm using a proposed set of gait parameters in predicting frailty stages. Changes in discriminating power was compared between sensor data extracted from the left and right shin sensor. The aim was to investigate the feasibility of developing a foot-worn sensor to assess frailty. The results yielded a highly accurate model in predicting frailty stages, irrespective of sensor location. The independent predictors of frailty stages were propulsion duration and acceleration, heel-off and toe-off speed, mid stance and mid swing speed, and speed norm. The proposed model enables discriminating different frailty stages with area under curve ranging between 83.2–95.8%. Furthermore, results from the neural network suggest the potential of developing a single-shin worn sensor that would be ideal for unsupervised application and footwear integration for continuous monitoring during walking.

Recognizing Movement Injuries in Children.

Science.gov (United States)

Williams, Biff; Marston, Rip

2001-01-01

Describes five common youth sport injuries: Little League elbow, swimmer's shoulder, shin splints, Osgood's Schlatters disease, and jumper's knee, also noting their corresponding causes, behavioral symptoms, treatment techniques, and prevention strategies. The information is intended to help teachers identify sports injuries more readily and…

Erythema exsudativum multiforme after a Leishmania skin test

NARCIS (Netherlands)

Wind, Bas S.; Guimarães, Luiz H.; Machado, Paulo R. L.

2014-01-01

A 45-year-old otherwise healthy male from an endemic region for Leishmania braziliensis infection in Bahia, Brazil, presented with three erosive hemorrhagic infiltrated plaques on the left shin accompanied with lymphadenopathy in the groin since one month. A Leishmania skin test performed on the

Simultaneous Determination of Seven Constituents in Herbal ...

African Journals Online (AJOL)

Simultaneous Determination of Seven Constituents in Herbal Prescription Jaeumganghwa-Tang Using HPLC-PDA. CS Seo, JH Kim, HK Shin. Abstract. A simple and accurate high-performance liquid chromatographic method was applied to the quantitative analysis of seven components of the traditional herbal prescription ...

Proceedings – Mathematical Sciences | Indian Academy of Sciences

Indian Academy of Sciences (India)

Author Affiliations. Jung Rye Lee1 Choonkil Park2 Dong Yun Shin3. Department of Mathematics, Daejin University, Kyeonggi 487-711, Korea; Research Institute for Natural Sciences, Hanyang University, Seoul 133-791, Korea; Department of Mathematics, University of Seoul, Seoul 130-743, Korea ...

Experience of Soviet Medicine in a Great Patriotic War, 1941-1945. Volume 16, Section 3.

Science.gov (United States)

1980-10-22

with spasm or compression of vessels by scars. For explaining the presence of the silent infection valuable information gave accurate anamnesis : the...detected accidentally. V. entered apropos of feaoral arteriovenous aneurisms. In anamnesis there was a bullet injury of shin. In the process of

JPRS Report, Science & Technology, Japan, Structure, Properties of Al Amorphous Alloys

Science.gov (United States)

1990-12-04

present report, and to the members of the staff, particularly Masaji Nomura, Tetsuya Ishikawa , and Atsushi Koyama, of the High Energy Physics Laboratory...Aichi Educational University, and the research on Al-based quasicrystals was with Shin Takeuchi, and Kaoru Kimura, both of Tokyo University, and Takeshi

Distribution, density, and productivity of accipiter hawks breeding in Oregon

Science.gov (United States)

Richard T. Reynolds; Howard M. Wight

1978-01-01

Density of nests and productivity of Sharp-shinned Hawks (Accipiter striatus), Cooper's Hawks (A. cooperii), and Goshawks (A. gentilis) within Oregon are of interest because of recent declines of accipiter hawks in the eastern United States (Schriver 1969, Hackman and Henny 1971, Henny and Wight 1972). One...

Family Maltreatment, Substance Problems, and Suicidality: Randomized Prevention Effectiveness Trial

Science.gov (United States)

2007-02-01

program, for example, are twofold: to reduce crime itself, and to reduce the fear of crime and the avoidance behaviors (e.g., staying indoors at night... marijuana ); those who did use such substances tended to do so less often (Spoth, Redmond, & Shin, 2001). RESOURCES REQUIRED VCR, overhead

78 FR 67104 - Initiation of Antidumping and Countervailing Duty Administrative Reviews and Request for...

Science.gov (United States)

2013-11-08

... foreign sellers who purchase and export subject merchandise to the United States. Entities that currently... foreign sellers that purchase and export subject merchandise to the United States. \\1\\ Such entities... and Bows Co., Ltd Yangzhou Bestpak Gifts & Crafts Co., Ltd......... Yu Shin Development Co. Ltd The...

Performance Prediction and Simulation of Gas Turbine Engine Operation for Aircraft, Marine, Vehicular, and Power Generation

Science.gov (United States)

2007-02-01

1 Diagnose is a Greek word, literally translating to ‘know through’, and actually meaning gaining knowledge about something that is...E.M., Tan, C.S., Marble , F.E., Shin, H.-W. and Wisler, D., “Effects of Asymmetric Tip Clearance on Compressor Stability”, accepted for publication

78 FR 60844 - Wooden Bedroom Furniture From the People's Republic of China: Partial Rescission of Antidumping...

Science.gov (United States)

2013-10-02

... Furniture Co., Ltd. Dorbest Ltd., Rui Feng Woodwork Co., Ltd. Aka Rui Feng Woodwork (Dongguan) Co., Ltd., Rui Feng Lumber Development Co., Ltd. Aka Rui Feng Lumber Development (Shenzhen) Co., Ltd., Fine... Fung Wooden Factory, Sun Fung Co., Shin Feng Furniture Co., Ltd., Stupendous International Co., Ltd...

The effect of the interaction of various spawn grains with different ...

African Journals Online (AJOL)

Owner

The high protein, carbohydrate, fatty acid and amino acid content of brown rice stimulate fruiting (Roux and Labarère, 1991; Shin and Godber, 1996). In addition, grains have also been ... pathogenicity, vegetative compatibility and electrophoretic karyotype with field populations of Stagnospora nodorum. Plant Pathol. 49(2):.

Journal of Genetics | Indian Academy of Sciences

Indian Academy of Sciences (India)

Author Affiliations. Shin-Aeh Lee1 Seung-Gon Lee1 Kyoung-Oh Cho2 Changbaig Hyun1. Section of Internal Medicine, School of Veterinary Medicine, Kangwon National University, Chuncheon 200 701, Korea; Institute of Veterinary Medicine, College of Veterinary Medicine, Chonnam National University, Kwangju 500 757, ...

Study on the natural convection heat transfer characteristics in the air duct

Energy Technology Data Exchange (ETDEWEB)

Kim, Y K; Lee, Y B; Choi, S K; Hwang, J S; Nam, H Y [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1998-12-31

Temperature distribution measurements in the mockup apparatus of reactor vessel were performed to determine the effective thermal conductivity of porous media with different geometry and to obtain the experimental data for the heat transfer processes by natural convection occurring in the air duct. The temperature distributions at four separated sections with different arrangements of porous media have different slopes according to the geometrical configuration. From the measured temperature distribution, effective thermal conductivity have been derived using the least square fitting method. The test at air duct was performed to the high heat removal at 3.4kW/m{sup 2} by the natural convection from the outer wall to the air. And also the temperature distributions in the sir duct agree well with the 1/7th power-law turbulent temperature distribution. The obtained heat transfer data have been compared with the Shin`s and Sieger`s correlations. 10 refs., 6 figs. (Author)

Study on the natural convection heat transfer characteristics in the air duct

Energy Technology Data Exchange (ETDEWEB)

Kim, Y. K.; Lee, Y. B.; Choi, S. K.; Hwang, J. S.; Nam, H. Y. [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1997-12-31

Temperature distribution measurements in the mockup apparatus of reactor vessel were performed to determine the effective thermal conductivity of porous media with different geometry and to obtain the experimental data for the heat transfer processes by natural convection occurring in the air duct. The temperature distributions at four separated sections with different arrangements of porous media have different slopes according to the geometrical configuration. From the measured temperature distribution, effective thermal conductivity have been derived using the least square fitting method. The test at air duct was performed to the high heat removal at 3.4kW/m{sup 2} by the natural convection from the outer wall to the air. And also the temperature distributions in the sir duct agree well with the 1/7th power-law turbulent temperature distribution. The obtained heat transfer data have been compared with the Shin`s and Sieger`s correlations. 10 refs., 6 figs. (Author)

Business diversification in blast furnace steel makers. Koro kakusha no takakuka no jokyo

Energy Technology Data Exchange (ETDEWEB)

1991-11-01

Scenarios are presented for the current business diversification and future business developments by the three Japanese blast furnace steel makers (Kawasaki Steel, Kobe Steel and Shin Nippon Steel). The conceptions for their advancement into the 2lst century are more or less similar. The business diversification commenced for Kawasaki Steel in 1985, Kobe Steel in 1989 and Shin Nippon Steel in 1987, all taking a pattern of tree-like development into related businesses starting from the basic industry. Their new businesses may be summarized generically as: electronics industry (LSI, silicon, electronic devices, information and communication); new material related business (ferrite, ceramics, metal powder, metal foils); chemical business (plastics, etc.); engineerings (architecture, urban andregional developments, etc.); and service business (system network development, lease business, real estate, leisure business, etc.). Endeavors are made also on full-scale entity into tertiary industries, and amenity field. M A and joint venture businesses are attempted in wide scale and positive manners also in overseas countries. 6 fige., 4 tads.

Second Language Acquisition: Cultural, Cognitive, and Clinical Considerations for Counseling Practice

Science.gov (United States)

Ivers, Nathaniel N.; Ivers, John J., Sr.; Duffey, Thelma

2013-01-01

The non-English-speaking population of the United States has increased by 140% since 1980 (Shin & Kominski, 2010). To serve this growing population, it is important that counselors increase their multicultural and multilingual competence. Through the lens of multicultural theory and relational-cultural theory, we analyze potential benefits of…

On the asymptotic distribution of a unit root test against ESTAR alternatives

NARCIS (Netherlands)

Hanck, Christoph

We derive the null distribution of the nonlinear unit root test proposed in Kapetanios et al. [Kapetanios, G., Shin, Y., Snell, A., 2003. Testing for a unit root in the nonlinear STAR framework, journal of Econometrics 112, 359-379] when nonzero means or both means and deterministic trends are

Reference: 414 [Arabidopsis Phenome Database[Archive

Lifescience Database Archive (English)

Full Text Available 414 http://metadb.riken.jp/db/SciNetS_ria224i/cria224u4ria224u16832621i Jayasekaran Kandakumar... 11 1255-62 16832621 2006 Nov Plant cell reports Jayasekaran Kandakumar|Kim Kyung-Nam|Ok Sung Han|Shin Jeong Sheop|Vivekanandan Munusamy

Defending against speculative attacks: A hybrid model of exchange market pressure and crises

NARCIS (Netherlands)

Daniels, T.R.; Jager, H.; Klaassen, F.

2008-01-01

While virtually all currency crisis models recognise that the fate of a currency peg depends on how tenaciously policy makers defend it, they seldom model how this is done. We incorporate themechanics of speculation and the interest rate defence against it in the model of Morris and Shin (American

Currency crises with the threat of an interest rate defence

NARCIS (Netherlands)

Daniels, T.R.; Jager, H.; Klaassen, F.

2011-01-01

While virtually all currency crisis models recognise that the decision to abandon a peg depends on how tenaciously policy makers defend it, this is seldom modelled explicitly. We add the threat of an interest rate defence to the global game model of Morris and Shin (American Economic Review 88,

Defending against speculative attacks

NARCIS (Netherlands)

Daniëls, T.; Jager, H.; Klaassen, F.

2009-01-01

While virtually all currency crisismodels recognise that the fate of a currency peg depends on how tenaciously policy makers defend it, they seldom model how this is done. We incorporate themechanics of speculation and the interest rate defence against it in the model of Morris and Shin (American

76 FR 18349 - Consumer Leasing

Science.gov (United States)

2011-04-04

... FURTHER INFORMATION CONTACT: Stephen Shin, Attorney, or Benjamin K. Olson, Counsel, Division of Consumer... Workers (CPI-W), as published by the Bureau of Labor Statistics. Therefore, from July 21, 2011 to December..., Division of Research and Statistics, Mail Stop 95-A, Board of Governors of the Federal Reserve System...

Kimono Fusion - ultratraditsioonilisest hüpermoodsaks / Kelly Kipper

Index Scriptorium Estoniae

Kipper, Kelly

2010-01-01

Näitus "Kimono Fusion - ultratraditsioonilisest hüpermoodsaks" Stockholmis Östasiatiska muuseumis 10. jaanuarini 2010. Eksponeeritakse kimonosid ja obisid (traditsioonilised kimonovööd) ning jaapani moekunstnike loomingut. Lähemalt Shin Tanaka, Shojono Tomo, duo Takuya Angel'i (Takuya Sawada koos abikaasa Akikoga), Kunihiko Morinaga, Suzuki Takayuki loomingust

Anti-hepatitis B viral activity of Phyllanthus niruri L (Phyllanthaceae ...

African Journals Online (AJOL)

Yong Li, Xin Li, Jia-Kun Wang, Yan Kuang and Ming-Xiu Qi*. Centers for Disease .... sarkosyl, 7 % 2-mercaptoethanol, 4 M guanidine ..... AK, Gane E, Hou JL, Jafri W, Jia J, Kim JH, Lai CL, Lee. HC, Lim SG, Liu CJ ... Shin MS, Kang EH, Lee YI.

Pacific Armies Management Seminar (5th) Held at manila, Republic of the Philippines on 16-20 November 1981.

Science.gov (United States)

1981-01-01

0. C. Admin Wing, Bashar (BAS) MAJ ENAYET Hussain, General Staff Officer, Operations Directorate, Army Headquarters LTC Hugh M. BAKER, US Defense...L. BUTCHER **LTC Ronald TURNER MAJ Hercules CATALUNA LTC Paul SOMR MAJ ENAYET Hussain MAJ Frederick DREW MAJ SHIN 11 Soon MAJ Brian HALL MAJ TAN Khin

Attack pattern of Platypus koryoensis (Coleoptera: Curculionidae: Platypodidae) in relation to crown dieback of Mongolian oak in Korea

Science.gov (United States)

Jung-Su Lee; Robert A. Haack; Won Il. Choi

2011-01-01

The ambrosia beetle, Platypus koryoensis (Murayama), vectors the Korean oak wilt (KOW) pathogen, Raffaelea quercus-mongolicae K.H. Kim, Y.J. Choi, & H.D. Shin, in Korea, which is highly lethal to Mongolian oak, Quercus mongolica Fisch., and is considered a major threat to forest ecosystem health. We...

Acute Cutaneous Microvascular Flow Responses to Whole-Body Tilting in Humans

Science.gov (United States)

Breit, Gregory A.; Watenpaugh, Donald E.; Ballard, Richard E.; Hargens, Alan R.

1993-01-01

The transition from upright to head-down tilt (HDT) posture in humans increases blood pressure superior to the heart and decreases pressure inferior to the heart. Consequently, above heart level, myogenic arteriolar tone probably increases with HDT, in opposition to the withdrawal of baroreceptor-mediated sympathetic tone. We hypothesized that due to antagonism between central and local controls, the response of the facial cutaneous microcirculation to acute postural change will be weaker than that in the leg, where these two mechanisms reinforce each other. Cutaneous microvascular flow was measured by laser Doppler flowmetry simultaneously at the shin and the neck of 7 male and 3 female subjects. Subjects underwent a stepwise tilt protocol from standing control to 54 deg head-up tilt (HUT), 30 deg, 12 deg, O deg, -6 deg (HDT), -12 deg, -6 deg, O deg, 12 deg, 30 deg, 54 deg, and standing, for 30-sec periods with 10-sec transitions between postures. Flows at the shin and the neck increased significantly (P less than 0.05) from standing baseline to 12 deg HUT (252 +/- 55 and 126 +/- 9% (bar X +/- SE) of baseline, respectively). From 12 deg to -12 deg tilt, flows continued to increase at the shin (509 +/- 71% of baseline) but decreased at the neck to baseline levels (100 +/- 15% of baseline). Cutaneous microvascular flow recovered at both sites during the return to standing posture with significant hysteresis. Flow increases from standing to near-supine posture are attributed at both sites to baroreceptor-mediated vasodilation. The great dissimilarity in flow response magnitudes at the two measurement sites may be indicative of central/local regulatory antagonism above heart level and reinforcement below heart level.

Fiscal 1997 R and D project on industrial science and technology under a consignment from NEDO. R and D of the application technology of functional protein complex (R and D of the high-functional maintenance technology for power plants); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo gijutsu Sogo Kaihatsu Kiko itaku. Kinosei tanpakushitsu shugotai oyo gijutsu no kenkyu kaihatsu (hatsuden shisetsuyo kokino maintenance gijutsu kaihatsu) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

In order to develop advanced maintenance technology for power generation facilities, application technology of functional protein complexes is under investigation. On a light controllable enzymatic reaction system, construction of a light controllable bio-reactor by physico-chemical and bio- chemical techniques, and structure and functions of a photosynthetic protein complex using thermophilic cyanobacteria as material are under investigation. On a molecular mechanism for recognition and reaction of receptor proteins, structure analysis and engineering application of glutamate receptor channels of a synaptic transmission system, and basic study and material proteins for artificial structures using endocytic micromachinery, and a multi-enzyme system for synthesis of glycosphingolipids are under investigation. On a complex oxidation/reduction system by genetic engineering technique, construction of a high- efficiency stable system with functionally arranged oxidoreductase and electron transmission systems in biomembranes is in promotion. Research work was also made on molecular assemblies for a functional protein system. 166 refs., 91 figs., 9 tabs.

Fiscal 1997 R an D project on industrial science and technology under a consignment from NEDO. R and D of the ultimate manipulation technology of atoms and molecules (high-efficiency and analysis and manipulation technology for DNA); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo gijutsu Sogo Kaihatsu Kiko itaku. Genshi bunshi kyokugen sosa gijutsu no kenkyu kaihatsu seika hokokusho (DNA nado kokoritsu kaiseki sosa gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

This paper describes R and D of the ultimate manipulation technology of atoms and molecules (atom technology). Through the observation of super spiral DNA fixed on a spermin or spermidine treated mica substrate by AFM (atomic force microscope), fixation of DNA without any deformation in solution was clarified, and visualization of the spiral structure of DNA were successfully achieved. Manipulation of Xe atoms adsorbed on an Si(111) surface was certainly possible by using STM (scanning tunneling microscope)/atom probe equipment. A nucleation mechanism in crystal growth was studied for various organic source-molecules/GaAs(001) surface systems, and formation of high-density nuclei on the GaAs surface was achieved by accelerating the translational energy of Ga material molecules up to 6eV or more. Ziegler- Natta catalysis important for industrial polymerization of olefin molecules was precisely analyzed by first-principle dynamic simulation. A large-scale simulation of zeolite catalyst is also in promotion for methanol to gasoline conversion. 51 refs., 87 figs., 7 tabs.

Fiscal 1997 report on the R and D project consignment from NEDO on industrial science and technology. R and D on total base technology for marine resources (Mn nodules mining system) (total system (experimental plan)); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Kaiyo shigen sogo kiban gijutsu no kenkyu kaihatsu (mangan dankai saiko system) seika hokokusho (total system (jikken keikaku) hen)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Study was made on the design of experiments for confirming the technological and economical feasibility of commercial production of Mn nodules. An experimental sea area was selected considering Mn nodule characteristics such as concentration, continuity of nodule distribution and nodule size, and sea bottom topographic features such as flatness and exposed bed rock disturbing traveling of nodule collectors. The experimental plan was decided on the basis of the survey and study on an experimental scale, various requirements, weather and sea weather features of the sea area, and sea bottom conditions. Based on the experimental plan, various verification tests and simulation analyses were carried out, and functions of various equipment were confirmed. The conceptual design of a mining system assumed both pump-lift and air-lift systems, and yearly production rates of 2 and 3 million tons by 2 mining barges, and summarized main points of every system. As the evaluation result, the future direction of commercial production of Mn nodules was clarified to a certain extent. 5 figs., 21 tabs.

Mobility and Human Factors Evaluation of Three Prototype Assault Snowshoes.

Science.gov (United States)

1994-01-01

toe of snowshoe beats shins (bruised) when running (3) Snowshoe tails strike your back when falling in prone position (n) - Number of subjects who...user’s boot and cradle his forefoot in the proper position. This feature worked adequately with the vapor barrier boot but was not compatible with the

Medial Tibial Stress Syndrome : Diagnosis, Treatment and Outcome Assessment

NARCIS (Netherlands)

Winters, M.

2017-01-01

Medial tibial stress syndrome (MTSS), also known as shin splints, is one of the most common sports injuries. Although 20% of the jumping and running athletes have MTSS at some point while engaging in sporting activities, we know little about it. There is a lack of knowledge regarding making the

A 38-year Summary of Raptor Banding at Hawk Ridge, Duluth, Minnesota, USA

Science.gov (United States)

Consistent banding of raptors at Hawk Ridge was initiated in 1972 and has continued for 38 years to the present. A total of 99,505 raptors or 2,619 per year have been banded at Hawk Ridge including 23 different species. The majority of birds banded were Sharp-shinned Hawks (Acci...

Erratum: Retraction Note to: Effect of Carbon Content on the Electrical Conductivity of Carbon Black-Filled PMC with Various Matrices

Science.gov (United States)

Shin, Soon-Gi

2018-03-01

The Editor-in-Chief and Editorial Board of Electronic Materials Letters have retracted this article [1] because its contents have been previously published by Miyasaka et al. [2]. The contents of this article are therefore redundant. Author Soon-Gi Shin has not responded to correspondence from the Editor about this retraction.

Kug Sun Hong

Indian Academy of Sciences (India)

Home; Journals; Bulletin of Materials Science. Kug Sun Hong. Articles written in Bulletin of Materials Science. Volume 33 Issue 1 February 2010 pp 43-47 Composites. Microstructure and mechanical properties of Mg–HAP composites · Asit Kumar Khanra Hwa Chul Jung Seung Hoon Yu Kug Sun Hong Kwang Seon Shin.

Should Colleges Withdraw Students Who Threaten or Attempt Suicide?

Science.gov (United States)

Pavela, Gary

2005-01-01

This article discusses the pros and cons of "involuntary withdrawals" in cases of students who are at risk of suicide. A June, 2005, Massachusetts Superior Court summary judgment ruling in the case of "Shin v. Massachusetts Institute of Technology (MIT)" concluded that MIT administrators owed a duty of care to suicide victim,…

In vitro seed germination and seedling development of the orchid ...

African Journals Online (AJOL)

Gaurav

colourful-long lasting flowers, shinning green leaves and variously shaped pseudobulbs, they are very popular around the world. A total of 90 species of orchids ... ornamental plant in many gardens, nurseries, hotels, etc. Its medicinal value is due to paste of its pseudobulb which is applied to the forehead against headache ...

Realistic Bomber Training Initiative. Environmental Impact Statement. Volume 1

Science.gov (United States)

2000-01-01

arizonica Bitterweed Hymenoxys odorata Black grama Bouteloua eriopoda Broadleaf milkweed Ascelpias latifolia Broomweed Amphiachyris spp. and...Larrea tridentata Douglas fir Pseudotsuga menziesii Fragrant ash Fraxinus cuspidata Galleta grass Hilaria jamesii Gambel (=shin) oak Quercus gambelii...Guajillo Acacia berlandieri Juniper Juniperus spp. Little bluestem Schizachyrium scoparium Live oak Quercus turbinella Mesquite Prosopis spp. Mexican

Few-electron Qubits in Silicon Quantum Electronic Devices

Science.gov (United States)

2014-09-01

Calculation of the charge relaxation time T1 . . . . . . . . . . . . . . 63 5.1 The absence of spin blockade in dual-gated DQD devices . . . . . . . 70...2013. 98 115 [102] M. Pioro-Ladrière, T. Obata, Y. Tokura, Y.-S. Shin, T. Kubo , K. Yoshida, T. Taniyama, and S. Tarucha. Nat. Phys., 4:776–779

Value of lateral blood pool imaging in patients with suspected stress fractures of the tibia.

Science.gov (United States)

Mohan, Hosahalli K; Clarke, Susan E M; Centenara, Martin; Lucarelli, Amanda; Baron, Daniel; Fogelman, Ignac

2011-03-01

To critically evaluate the use of lateral blood pool imaging in athletes with lower limb pain and with a clinical suspicion of stress fracture. Two experienced nuclear medicine physicians evaluated 3-phase bone scans using 99mTc-methylene diphosphonate performed in 50 consecutive patients referred from a specialist sports injury clinic for suspected tibial stress fracture. The vascularity to the tibia as seen on the blood pool (second phase) images in the anterior/posterior views was compared with the lateral/medial view assessments. Stress fractures were presumed to be present when on the delayed images (third phase) there was a focal or fusiform area of increased tracer uptake involving the tibial cortex. Shin splints which are a recognized cause of lower limb pain in athletes mimicking stress fracture were diagnosed if increased tracer uptake was seen extending along the posterior tibial surface with no significant focal or fusiform area of uptake within this. Inter-reviewer agreement for the assessment of vascularity was also assessed using Cohen's Kappa scores. Twenty-four stress fractures in 24 patients and 66 shin splints in 40 patients were diagnosed. In 18 patients stress fracture and shin splints coexisted. In 10 patients no tibial pathology was identified. Of the 24 patients diagnosed with stress fractures, lateral/medial blood pool imaging was superior in the assessment of blood pool activity (P tibial stress fractures, lateral views of the tibia provide the optimal method for evaluation of vascularity. Prospective studies with quantitative or semi-quantitative assessment of skeletal vascularity could provide supplementary information relating to the pathophysiology of stress fractures, for example, the time scale of vascular changes after a tibial stress fracture, and potentially could have clinical relevance as to the assessment of the severity of stress fractures and their prognosis.

Repression of Cell Proliferation and Androgen Receptor Activity in Prostate Cancer Cells by 2'-Hydroxyflavanone

OpenAIRE

大筆, 光夫; Ofude, Mitsuo

2014-01-01

博士論文要旨Abstract 以下に掲載：Anticancer Research 33(10) pp.4453-4461 2013. The International Institute of Anticancer Research. 共著者：MITSUO OFUDE, ATSUSHI MIZOKAMI, MISAKO KUMAKI, KOUJI IZUMI, HIROYUKI KONAKA, YOSHIFUMI KADONO, YASUHIDE KITAGAWA, MINKYOUNG SHIN, JIAN ZHANG, EVAN T. KELLER, MIKIO NAMIKI 　

2329-IJBCS-Article-Dr o Owoeye Tunde

African Journals Online (AJOL)

hp

X-ray of the bones showed an oblique fracture in the distal end of the shaft of fibula which is suggestive of post traumatic tibiofibular synostosis (TFS). Knowledge of distal TFS is important in resolving the puzzle of chronic shin pain of unknown origin and in accurate diagnosis of causes of ankle deformity and malformations.

Distal tibiofibular synostosis in a Nigerian: A case report | Owoeye ...

African Journals Online (AJOL)

X-ray of the bones showed an oblique fracture in the distal end of the shaft of fibula which is suggestive of post traumatic tibiofibular synostosis (TFS). Knowledge of distal TFS is important in resolving the puzzle of chronic shin pain of unknown origin and in accurate diagnosis of causes of ankle deformity and malformations.

Improved design features of KSNP+ BOP Fluid System

International Nuclear Information System (INIS)

Park, Heung Gyu; Yoon, Kyung Sup

2002-01-01

KOPEC (Korea Power Engineering Co.) in conjunction with the client KHNP (Korea Hydro and Nuclear Power Co.) has been developing the KSNP + (Improved Korean Standard Nuclear Power Plants) design concept since 1998. The main objective of the KSNP + is to enhance safety and economy of KSNP. The design concepts of the KSNP + will be implemented in Shin-Kori Units 1 and 2 Shin-Wolsung Units 1 and 2. This paper provides on an introduction to the improved design features of the KSNP + BOP fluid system consisting of 45 design improvement items. The design improvement concepts of the BOP fluid system have been developed as follows: optimization of system configuration and capacity, simplification of system, and adoption of advanced design features. Improved design features of the BOP fluid system allow additional benefits due to making a contribution to the optimization of plant arrangement and the reduction of operating costs during the plant life time. In conclusion, design improvement to the BOP fluid system have contributed to the KSNP + design concept being more reliable, safe and economically competitive

A study on the economics enhancement of OPR1000 applied to advanced construction methods

International Nuclear Information System (INIS)

Park, Ki Jo; Yoon, Eun Sang

2007-01-01

OPR1000 (Optimized Power Reactor 1000MW) is a totally improved design model of Korea nuclear power plants and the latest 1,000MW nuclear power plant in the Republic of Korea. Shin Kori 1 and 2 and Shin Wolsong 1 and 2 and under construction and these are OPR1000 types. Although OPR1000 is up to data 1,000MW nuclear power plant, it is not enough to be much superior to other nuclear power plants. Under the WTO and FTA circumstance of domestic and stiff overseas competition for nuclear power plants, it is necessary to enhance the economics of OPR1000. And then, the enhanced economic alternatives are reviewed and the advanced construction methods are considered. Based on research and a comprehensive review of nuclear power plant construction experiences, an alternative application of advanced construction methods is developed and compared with existing OPR1000 for schedule and economics. In this paper, economic analyses of a construction cost and a levelized electricity generation cost are performed

Convergence to the long-run equilibrium: the case of natural gas markets

International Nuclear Information System (INIS)

Lien, D.; Root, T.H.

1999-01-01

Intuitively, the persistence of a shock may last longer in futures contracts with a longer maturity. Estimation of the speed with which different contract lengths converges to the long-run equilibrium following a shock, provides a means for comparing the informational efficiency of the contracts. Standard empirical investigation of the response of a market to a shock utilizes impulse response analysis. However, this analysis is problematic since there is not a unique variance-covariance decomposition. Pesaran and Shin [Pesaran, M.H., Shin, Y., 1996. Cointegration and speed of convergence to equilibrium. J. Econ. 71, 117-143] introduced an alternative to the standard impulse response analysis, the persistence profile. By estimating the one step ahead forecast error for the entire system, the persistence profile provides a unique measure of the effect of the shock. This paper empirically estimates persistence profiles for the natural gas futures market. The findings indicate that the persistence of a shock does increase with the contract length. (Copyright (c) 1999 Elsevier Science B.V., Amsterdam. All rights reserved.)

Development of Reactor Core Model based on Optimal Analysis for Shinhanul no. 1, 2 Simulator

Energy Technology Data Exchange (ETDEWEB)

Kim, Kyung-min [Korea Hydro Nuclear Power Co., Daejeon (Korea, Republic of)

2016-10-15

As one of the outputs of 'Development of the Shin Hanul Nuclear Plant(SHN) 1,2 Simulator' project which is being done by KHNP Central Research Institute, the SHN1,2 Simulator is being developed including the KNICS methodology and advanced Alarm Systems first applied to the Nuclear Power Plant in Korea, and the SHN 1,2 simulator adopts the virtually stimulated HMI(Human-Machine Interface) for the non-safety MMIS system, whose key-programs are identical to those applied to the real SHN 1,2 plants. The purpose of this paper is to develop localization core model by integrating the Simulator system with the Simulator core model though technology agreement of KAERI. To develop ShinHanul 1 and 2 reactor core simulator model, KHNP and KAERI create MASTER-SIM model and tried validation. And calculations of MASSIM{sub S}S program for MASTER{sub S}IM validation, are within tolerance range. Test has not yet been completed. And many verification will be conducted MASTER-SIM software is expected to be the highest economic software and satisfy international simulator standards.

Analysis of LOAF(Loss of All Feed Water) Accident using OPR1000 Simulator

International Nuclear Information System (INIS)

Hwang, Do Hyun; Lee, Myeong Soo; Hong, Jin Hyuk; Byon, Su Jin

2011-01-01

Recently, a ferocious tsunami unleashed by Japan's biggest recorded earthquake slammed into its eastern coast, killing hundreds of people as it carried away ships, cars and homes, and triggered widespread fires that burned out of control. In the meantime, it damaged Fukushima nuclear power plants and it seems that radiation containing hydrochloric acid, potassium cyanide and other harmful chemicals has been released. People are concerned even if residual radiation levels are not high because Korea might be vulnerable to the spread of radiation from Japan. In this paper, LOAF(Loss Of All Feed Water) accident will be covered to provide information on cause and effect of measures against LOAF accident using OPR1000 simulator, which is using for training operators of ShinKori-Unit 1 and 2 and ShinWolsung-Unit 1 and 2. OPR1000 simulator adopted RELAP5 R/T code for the modeling of NSSS (Nuclear Steam Supply System) TH (Thermal-Hydraulics) and Reactor Core, and selected 3KEYMASTERTM, a commercial plant simulation tool for NSSS auxiliary systems modeling, BOP(Balance of Plant) modeling and simulator environment

Chemoprevention of Ovarian Cancer

Science.gov (United States)

2006-10-01

288: 390-402. 51. Shin DM, Xu XC, Lippman SM, Lee JJ, Lee JS, Batsakis JG, Ro JY, Martin JW, Hittelman WN, Lotan R, Hong WK. Accumulation of p53...epithelial carcinoma of the ovary. Am. J. Epidemiol., 114: 398–405, 1981. 8. Joly , J. D., Lilienfeld, A. M., Diamond, E. L., and Borss, I. D. J. An

Cooper's Hawk (Accipiter cooperii)

Science.gov (United States)

Jean-Luc E. Cartron; Patricia L. Kennedy; Rob Yaksich; Scott H. Stoleson

2010-01-01

The Cooper's Hawk (Accipiter cooperii) is intermediate in size between the Northern Goshawk (Accipiter gentilis) and the Sharp-shinned Hawk (A. striatus), northern North America's other two accipiters. The two sexes are almost alike in plumage, but as in both of the other species, the female is noticeably larger. According to Wheeler and Clark (1995), a...

Reducing the Risk of ACL Injury in Female Athletes

Science.gov (United States)

McDaniel, Larry W.; Rasche, Adrienna; Gaudet, Laura; Jackson, Allen

2010-01-01

The Anterior Cruciate Ligament (ACL) is located behind the kneecap (patella) and connects the thigh bone (femur) to the shin bone (tibia). Stabilizing the knee joint is the primary responsibility of the ACL. Injuries that affect the ACL are three to five times more common in females than males. This is a result of anatomical, biomechanical,…

Influence of hydrogen on chemical vapour synthesis of different ...

Indian Academy of Sciences (India)

Administrator

The role of hydrogen on the surface passivation behaviour of the Ni catalyst and its ..... Chae S J, Güneş F, Kim K K, Kim E S, Han G H, Kim S M,. Shin H-J, Yoon ... Xiong Y G, Suda Y, Wang D Z, Huang Y J and Ren Z F 2005. Nanotechnology ...

Diverse bone scan abnormalities in shin splints

International Nuclear Information System (INIS)

Spencer, R.P.; Levinson, E.D.; Baldwin, R.D.; Sziklas, J.J.; Witek, J.T.; Rosenberg, R.

1979-01-01

Four young patients who presented with pain over the anterior compartment of the legs, gave a recent athletic history suggesting stress fractures. Although radiographs were initially normal in all four cases, the bone scintigrams were positive. The individual findings, however, were quite different. In one there was a single focal area of increased radioactivity in each of the tibias; the second patient had uneven uptake of radiotracer and several foci of accumulation in the fibulas; the third showed diffuse linear tibial uptake suggesting periosteal lesions; and the fourth case revealed uptake in the lateral malleolus and in bones of the foot

Enhanced production of poly glutamic acid by Bacillus sp. SW1-2 ...

African Journals Online (AJOL)

مستخدم مقتنع بـ Microsoft Office

2013-01-30

Jan 30, 2013 ... Verification experiment was carried out to examine model validation and revealed more than. 95% validity. .... to 5-fold increase. On the other ... coefficients; β12, β13, β14, β23, β24 and β34 are cross product coefficients and ..... Ashiuchi M, Kamei T, Baek D-H, Shin S-Y, Sung M-H, Sod K, Yagi T,. Misono H ...

Main: 1FK0 [RPSD[Archive

Lifescience Database Archive (English)

Full Text Available Molecule: Nonspecific Lipid-Transfer Protein; Chain: A Lipid Transport G.W.Han, J.Y.Lee, H.K.Song, D.H.Shin,...Kim, J.Choe, D.Lim, H.J.Moon, S.W.Suh Structural Basis Of Non-Specific Lipid Binding In Mai...; @=28-120.|PDB; 1MZM; X-ray; @=28-120.|MaizeDB; 25447; -.|InterPro; IPR003612; A

Main: 1FK1 [RPSD[Archive

Lifescience Database Archive (English)

Full Text Available Molecule: Non-Specific Lipid Transfer Protein; Chain: A Lipid Transport G.W.Han, J.Y.Lee, H.K.Song, D.H.Shin....Kim, J.Choe, D.Lim, H.J.Moon, S.W.Suh Structural Basis Of Non-Specific Lipid Binding In Mai...y; @=28-120.|PDB; 1MZM; X-ray; @=28-120.|MaizeDB; 25447; -.|InterPro; IPR003612;

Main: 1FK5 [RPSD[Archive

Lifescience Database Archive (English)

Full Text Available Molecule: Nonspecific Lipid-Transfer Protein; Chain: A Lipid Transport G.W.Han, J.Y.Lee, H.K.Song, D.H.Shin,...Kim, J.Choe, D.Lim, H.J.Moon, S.W.Suh Structural Basis Of Non-Specific Lipid Binding In Mai...; @=28-120.|PDB; 1MZM; X-ray; @=28-120.|MaizeDB; 25447; -.|InterPro; IPR003612; A

骨质疏松症的预防与康复治疗%Prevention and rehabilitation treatment of osteoporosis

Institute of Scientific and Technical Information of China (English)

单述刚; 段献荣

2003-01-01

@@ INTRODCTION Incidence of osteoporosis is very high in menopausal women and the senile.There weren't satisfying therapeutic method at present and exercises,diet,shinning,drugs were the main basic treatment for osteoporosis which preventive effects were better than therapeutic effects.Scientific exercises plus diet containing high calcium or suitable supplement of calcium is an effective preventive method for osteoporosis.

Validation of coupled neutronic / thermal-hydraulic codes for VVER reactors. Final report

Energy Technology Data Exchange (ETDEWEB)

Mittag, S.; Grundmann, U.; Kliem, S.; Kozmenkov, Y.; Rindelhardt, U.; Rohde, U.; Weiss, F.-P.; Langenbuch, S.; Krzykacz-Hausmann, B.; Schmidt, K.-D.; Vanttola, T.; Haemaelaeinen, A.; Kaloinen, E.; Kereszturi, A.; Hegyi, G.; Panka, I.; Hadek, J.; Strmensky, C.; Darilek, P.; Petkov, P.; Stefanova, S.; Kuchin, A.; Khalimonchuk, V.; Hlbocky, P.; Sico, D.; Danilin, S.; Ionov, V.; Nikonov, S.; Powney, D.

2004-08-01

In recent years, the simulation methods for the safety analysis of nuclear power plants have been continuously improved to perform realistic calculations. Therefore in VALCO work package 2 (WP 2), the usual application of coupled neutron-kinetic / thermal-hydraulic codes to VVER has been supplemented by systematic uncertainty and sensitivity analyses. A comprehensive uncertainty analysis has been carried out. The GRS uncertainty and sensitivity method based on the statistical code package SUSA was applied to the two transients studied earlier in SRR-1/95: A load drop of one turbo-generator in Loviisa-1 (VVER-440), and a switch-off of one feed water pump in Balakovo-4 (VVER-1000). The main steps of these analyses and the results obtained by applying different coupled code systems (SMABRE - HEXTRAN, ATHLET - DYN3D, ATHLET - KIKO3D, ATHLET - BIPR-8) are described in this report. The application of this method is only based on variations of input parameter values. No internal code adjustments are needed. An essential result of the analysis using the GRS SUSA methodology is the identification of the input parameters, such as the secondary-circuit pressure, the control-assembly position (as a function of time), and the control-assembly efficiency, that most sensitively affect safety-relevant output parameters, like reactor power, coolant heat-up, and primary pressure. Uncertainty bands for these output parameters have been derived. The variation of potentially uncertain input parameter values as a consequence of uncertain knowledge can activate system actions causing quite different transient evolutions. This gives indications about possible plant conditions that might be reached from the initiating event assuming only small disturbances. In this way, the uncertainty and sensitivity analysis reveals the spectrum of possible transient evolutions. Deviations of SRR-1/95 coupled code calculations from measurements also led to the objective to separate neutron kinetics from

Performance Test of BF3 Neutron Detection System

Energy Technology Data Exchange (ETDEWEB)

Choi, Yu Sun; Shin, Ho Cheol [KHNP-CRI, Daejeon (Korea, Republic of); Cho, Jin Bok; Oh, Sae Hyun; Ryou, Seok Jean [USERS, Daejeon (Korea, Republic of)

2015-10-15

The neutron detecting system of First-of-a-kind plant such an APR1400 at Shin Kori should have been verified in the condition of low operating temperature and pressure of the primary coolant system before receiving the operation license. Auxiliary Ex-core Neutron Flux Monitoring System (AENFMS) is supposed to be installed using BF3 neutron detector in Shin Kori plant. The performance test of AENFMS was conducted to measure neutron sensitivity, moderation ratio and count rate in the same condition with Ex-core Neutron Flux Monitoring System (ENFMS) of APR1400 to verify its detection characteristics in compliance with the functional requirement. Performance test has been conducted for AENFMS of APR1400 to verify BF3 neutron sensitivity, moderation ration of PE, expecting neutron signal count rate from AENFMS, possible extending cable length from detector to pre-amplifier. As a result of measurement, the neutron sensitivity of 34.246±0.168(95%CI)cps/nv, moderation ratio of 11.343±0.039(95%CI) and AENFMS expecting count rate related to ENFMS of 17.8 times are acceptable in compliance with functional requirement, respectively.

Status and future prospects of extensive damage mitigation guidelines in Korea

International Nuclear Information System (INIS)

Lee, Sung Han; Kim, Han Chul; Kim, Tae Hyeong; Seul, Kwang Won

2012-01-01

Previous severe accidents such as TMI 2 and Chernobyl accidents occurred due to combinations of equipment failures and human errors. However, the Fukushima accident is the first severe accident caused by extreme natural hazards. The Fukushima accident indicated need for integration of accident management such as emergency operating procedures (EOPs), severe accident management guidelines (SAMGs), and extensive damage mitigation guidelines (EDMGs). Therefore, in order to mitigate the effect of simultaneous accidents at multiple units of a site due to extreme natural hazards such as earthquake, tsunami, flooding, the EDMGs in Korea are being evaluated in terms of its effectiveness in prevention and mitigation of a severe accident after the Fukushima accident. In the first step, the Generic EDMG will be developed by KHNP for Wolsong, Kori, Yonggwang, Ulchin, Shin Kori, Shin Wolsong sites by 2013 and then the Specific EDMG will be developed for six nuclear power plants that represent each type of reactors by 2015. The aim of this paper is to describe the EDMGs and also introduce the activities to improve effectiveness of EDMGs through efforts for reflecting lessons-learned from the Fukushima accident. Also, this paper provides the status of developing EDMGs in Korea

Characteristics of Morphological Parameters of Donkeys in the Czech Republic

Directory of Open Access Journals (Sweden)

Martina Kosťuková

2015-01-01

Full Text Available The donkey population in Central Europe and Czech Republic is very variation, which is a consequence of the donkeys originating from various areas of Europe. This has been proved to affect their body conformation. In this work, we are focusing on the population of donkeys in the Czech Republic and its analysis.The main aim of our work was to determine the values morphological parameters in the donkey population in the Czech Republic. Altogether, 23 body dimensions were taken and further processed to calculate 6 hippo metric indexes. The sample group we analyzed consisted by a total of 70 individuals, out of there were 23 stallions and 47 mares. The results were then processed using the methods of general linear model (GLM and multiple comparisons.We managed to prove a statistically significant influence of the sex factor for the following body measurements: shin length of the front limbs, chest width, withers height measured by tape, shin circumference on both front and pelvic limbs and also for weight index. Also, we have found a statistically significant difference in the scapula length when considering the age factor.

Development of Evaluation Technology for Hydrogen Combustion in containment and Accident Management Code for CANDU

International Nuclear Information System (INIS)

Kim, S. B.; Kim, D. H.; Song, Y. M.

2011-08-01

For a licensing of nuclear power plant(NPP) construction and operation, the hydrogen combustion and hydrogen mitigation system in the containment is one of the important safety issues. Hydrogen safety and its control for the new NPPs(Shin-Wolsong 1 and 2, Shin-Ulchin 1 and 2) have been evaluated in detail by using the 3-dimensional analysis code GASFLOW. The experimental and computational studies on the hydrogen combustion, and participations of the OEDE/NEA programs such as THAI and ISP-49 secures the resolving capabilities of the hydrogen safety and its control for the domestic nuclear power plants. ISAAC4.0, which has been developed for the assessment of severe accident management at CANDU plants, was already delivered to the regulatory body (KINS) for the assessment of the severe accident management guidelines (SAMG) for Wolsong units 1 to 4, which are scheduled to be submitted to KINS. The models for severe accident management strategy were newly added and the graphic simulator, CAVIAR, was coupled to addition, the ISAAC computer code is anticipated as a platform for the development and maintenance of Wolsong plant risk monitor and Wolsong-specific SAMG

Micro pan-tilter and focusing mechanism; Micro shikakuyo shisen henko kiko

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The micro pan-tilter and focusing mechanism can adjust focuses while changing freely the visual axis by using a super small CCD micro camera of 9.2 mm in a diameter times 27 mm in length, and contains a camera control unit (CCU) in this size. Many functions of a camera with a tripod head are concentrated into a size 1/10 of that of conventional cameras. The mechanism has been developed for a micro robot to inspect interior of small pipes in devices such as heat exchangers in a power plant. Future application is expected to medical endoscopes and portable information devices. This mechanism observes forward distant view and side wall short-distance view with the maximum resolution of 20 {mu}m by coordinated operation of three high-torque static power drive motors (with minimum outer diameter of 2.5 mm) fabricated by using the micromachine technology. Auto-focusing is also possible. The hybrid IC built-ion CCU has been realized by using the three-dimensional high-density mounting technology. Part of this research and development is performed under the industrial science technology research and development institution established by the Agency of Industrial Science and Technology of the Ministry of International Trade and Industry. (translated by NEDO)

Fiscal 1997 R and D project on industrial science and technology under a consignment from NEDO. R and D of the technology of accelerated formation of bio-functions (R and D of the technology of creation of novel advanced enzymes); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Kasokugata seibutsu kino kochiku gijutsu no kenkyu kaihatsu (shingata kokino koso sosei gijutsu kaihatsu) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

This paper describes R and D on creation technique of novel advanced enzymes. In fiscal 1997, a novel mutagenesis technique was developed to obtain more kinds of mutational genes by shuffling between clonal genes as compared with the previous homogeneous recombination. A genotype- and phenotype-linking technology was developed by expressing random motifs (peptide as components of the active site of protein) on bacteria, and by developing a single-motif protein library. Study was made on a selection system for functional molecules of catalytic activities in a gene level, and a selection system for function of signal transduction. Analysis and evaluation study on vitro experimental technology can be efficiently promoted by recognizing the fitness landscape of target protein molecules. As a result, instead of the conventional method which needs several cycles of mutation and screening of 3-4 week/cycle, an efficient method possible to obtain multiple mutants was established. Research work was also promoted by various organizations to develop an accelerated formation technology of bio-functions. 68 refs., 51 figs., 14 tabs.

Fiscal 1996 project on the modeling for effective energy consumption in developing countries under a consignment from NEDO. Recent on the results of the demonstrative study on scrap preheater of electric furnace in the iron making process (for public); 1996 nendo hatten tojokoku energy shohi koritsuka model jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Seitetsu katei ni okeru denkiro no genryo yonetsu sochi ni kakawaru jissho kenkyu seika hokokusho (kokaiyo)

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

Indonesia is the biggest iron steel producing country in the ASEAN countries. Most of the production is produced by the electric furnace method in which iron steel scrap is used as a material. However, an energy saving measure in this method, the electric furnace scrap preheater using flue gas, has not yet been spread on a full scale. This R and D is aimed at developing jointly with Indonesia an electric furnace scrap preheater for medium/small size electric furnaces which are adoptable to the present iron making situation in Indonesia and installing it to the electric furnace of the iron making plant in Indonesia for a demonstrative study on energy saving, etc. Spread/expansion of the electric furnace scrap preheater which is an excellent energy saving system targeted expansion of energy saving technology not only of Indonesia, but of ASEAN countries and Japan. In this fiscal year, remodeling of part of the system was made by change of flue gas flow for increasing the energy saving effect, and at the same time, a research study was made of a scrap reheater effective as a total system. Moreover, the paper investigated technical data/information in Japan and overseas. 3 figs., 9 tabs.

Fiscal 1997 R and D project on industrial science and technology under a consignment from NEDO. R and D of the ultimate manipulation technology of atoms and molecules (R and D of the formation of advanced materials for power generation environment); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Genshi bunshi kyokugen sosa gijutsu no kenkyu kaihatsu seika hokokusho (hatsuden kankyoyo kokino sozai keisei gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

This paper describes R and D of the ultimate manipulation technology of atoms and molecules (atom technology). Ten nanoscale Ge islands were successfully formed in proper positions on an Si substrate surface by using mask technology of nanoscale atomic layers. Growth of less-defect ZnSe films on a GaAs(110) surface was possible under various conditions. The magnetic transfer mechanism of Mn oxide with huge reluctance was clarified. Through study on selective-area deposition of Si on plasma-oxidized ultrathin SiO2 mask layers patterned by direct electron-beam exposure and an idea of SiO2/SiNx bilayer mask, direct use of the ultrathin mask layer as insulating layer in device structure was achieved. The superior property as electron beam resist of methano- fullerene composed of fullerene C60 with side chains including oxygen was clarified. The initial oxidation process of an Si(100) surface was analyzed, and the observation result by SREM was theoretically explained. Development of a high-resolution spin polarization electron microscope was also mentioned. 48 refs., 145 figs., 20 tabs.

Fiscal 1997 result of the R and D project of industrial science and technology under consignment from NEDO. R and D of creation technology of original advanced materials (R and D of creation technology of original advanced materials); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo (Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku). Dokusoteki kokino zairyo sosei gijutsu no kenkyu kaihatsu dokusoteki kokino zairyo sosei gijutsu no kenkyu kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

This paper describes R and D of creation technology of original advanced materials in the R and D project of industrial science and technology. Although new material technology is dependent on the needs of a future society, it should correspond to a global environment preservation society, information-oriented society and aging society as observed based on the present social trend, and new materials superior in hot strength, light weight, corrosion resistance, decomposability, photo-function, magnetism, conductivity, bio-copying and adaptability are demanded. This project is in promotion since fiscal 1996 to develop formation technology of high-performance advanced new materials by precise molecular control of structure and production process of organic polymers and molecular assemblies. The research started on 4 themes such as advanced stimulus-response material, precision catalytic polymerization, condensed system structure control and multi-dimensional polymer structure. The research on molecule harmonizing material was added in fiscal 1997. In fiscal 1997, the general committee discussed a progress situation and next year research plan, and surveyed an overseas technology trend. 1 fig.

Protective Mechanisms of Nitrone Antioxidants in Kanic Acid Induced Neurodegeneration

Science.gov (United States)

2004-01-01

Shin, E.J., Suh, J.H., Floyd, R.A., Bing, G. (1999) Protection of methamphetamine nigrostriatal toxicity by dietary selenium. Brain Res. 851:76-86...HC, and Bing, GY. (2004) Interleukin-10 protects against lipopolysaccharide-mediated neurotoxicity in substantia nigra Neurosci. Abstr. 29:677.18. 71...2004) Roles of the cyclooxygenase-2 and oxidative stress in the methamphetamine - induced neurotoxicity Neurosci. Abstr. 29:235.4.

A Nuclear Safety System based on Industrial Computer

International Nuclear Information System (INIS)

Kim, Ji Hyeon; Oh, Do Young; Lee, Nam Hoon; Kim, Chang Ho; Kim, Jae Hack

2011-01-01

The Plant Protection System(PPS), a nuclear safety Instrumentation and Control (I and C) system for Nuclear Power Plants(NPPs), generates reactor trip on abnormal reactor condition. The Core Protection Calculator System (CPCS) is a safety system that generates and transmits the channel trip signal to the PPS on an abnormal condition. Currently, these systems are designed on the Programmable Logic Controller(PLC) based system and it is necessary to consider a new system platform to adapt simpler system configuration and improved software development process. The CPCS was the first implementation using a micro computer in a nuclear power plant safety protection system in 1980 which have been deployed in Ulchin units 3,4,5,6 and Younggwang units 3,4,5,6. The CPCS software was developed in the Concurrent Micro5 minicomputer using assembly language and embedded into the Concurrent 3205 computer. Following the micro computer based CPCS, PLC based Common-Q platform has been used for the ShinKori/ShinWolsong units 1,2 PPS and CPCS, and the POSAFE-Q PLC platform is used for the ShinUlchin units 1,2 PPS and CPCS. In developing the next generation safety system platform, several factors (e.g., hardware/software reliability, flexibility, licensibility and industrial support) can be considered. This paper suggests an Industrial Computer(IC) based protection system that can be developed with improved flexibility without losing system reliability. The IC based system has the advantage of a simple system configuration with optimized processor boards because of improved processor performance and unlimited interoperability between the target system and development system that use commercial CASE tools. This paper presents the background to selecting the IC based system with a case study design of the CPCS. Eventually, this kind of platform can be used for nuclear power plant safety systems like the PPS, CPCS, Qualified Indication and Alarm . Pami(QIAS-P), and Engineering Safety

A Nuclear Safety System based on Industrial Computer

Energy Technology Data Exchange (ETDEWEB)

Kim, Ji Hyeon; Oh, Do Young; Lee, Nam Hoon; Kim, Chang Ho; Kim, Jae Hack [Korea Electric Power Corporation Engineering and Construction, Daejeon (Korea, Republic of)

2011-05-15

The Plant Protection System(PPS), a nuclear safety Instrumentation and Control (I and C) system for Nuclear Power Plants(NPPs), generates reactor trip on abnormal reactor condition. The Core Protection Calculator System (CPCS) is a safety system that generates and transmits the channel trip signal to the PPS on an abnormal condition. Currently, these systems are designed on the Programmable Logic Controller(PLC) based system and it is necessary to consider a new system platform to adapt simpler system configuration and improved software development process. The CPCS was the first implementation using a micro computer in a nuclear power plant safety protection system in 1980 which have been deployed in Ulchin units 3,4,5,6 and Younggwang units 3,4,5,6. The CPCS software was developed in the Concurrent Micro5 minicomputer using assembly language and embedded into the Concurrent 3205 computer. Following the micro computer based CPCS, PLC based Common-Q platform has been used for the ShinKori/ShinWolsong units 1,2 PPS and CPCS, and the POSAFE-Q PLC platform is used for the ShinUlchin units 1,2 PPS and CPCS. In developing the next generation safety system platform, several factors (e.g., hardware/software reliability, flexibility, licensibility and industrial support) can be considered. This paper suggests an Industrial Computer(IC) based protection system that can be developed with improved flexibility without losing system reliability. The IC based system has the advantage of a simple system configuration with optimized processor boards because of improved processor performance and unlimited interoperability between the target system and development system that use commercial CASE tools. This paper presents the background to selecting the IC based system with a case study design of the CPCS. Eventually, this kind of platform can be used for nuclear power plant safety systems like the PPS, CPCS, Qualified Indication and Alarm . Pami(QIAS-P), and Engineering Safety

Produção e aceitabilidade de cenoura sob cultivo orgânico no inverno e no verão Production and acceptability of carrot under organic cultivation in winter and summer

Directory of Open Access Journals (Sweden)

Dalva Paulus

2012-09-01

Full Text Available Para o cultivo da cenoura é importante conhecer a adaptação das cultivares de acordo com as condições climáticas do local e a preferência do consumidor. Com o objetivo de avaliar o desempenho e a aceitação, detectando assim a preferência dos consumidores a diferentes cultivares de cenoura em sistema de cultivo orgânico, realizou-se o presente trabalho. Avaliou-se o desempenho das cultivares de cenoura em Dois Vizinhos (PR. O delineamento experimental utilizado foi blocos casualizados com cinco repetições e quatro tratamentos para a época de inverno (cvs Nantes, Shin Kuroda, Danvers e Flaker e cinco tratamentos para o verão (cvs Shin Kuroda, Kuronan, Brasília, Esplanada e Carandaí. Avaliou-se a resistência à queima das folhas (Alternaria dauci, incidência de ombro verde, sólidos solúveis totais, produtividade e aceitabilidade, por meio de análise sensorial das cenouras in natura e em conserva tipo picles. Para o cultivo de inverno a cultivar Nantes resultou em maior produtividade (29,02 t ha-1 e para o cultivo de verão a produtividade da cultivar Esplanada foi superior (32,0 t ha-1 às demais cultivares, que não diferiram estatisticamente entre si. A cv. Esplanada apresentou maior resistência à queima das folhas e menor percentagem (5,6% de ombro verde. As características organolépticas das cultivares apresentaram boa aceitabilidade pelos consumidores participantes.For the carrot cultivation it is important to understand the adaptation of cultivars according to the local weather conditions and consumer preference. The objective was to evaluate the performance and acceptance, thereby detecting the consumer's preference for different carrot cultivars in organic cropping system. The performance of the cultivars Nantes, Shin Kuroda and Danvers Flaker was evaluated in the winter season and cultivars Shin Kuroda, Kuronan, Brasilia, Esplanada and Carandaí for cultivation of summer in Dois Vizinhos, Paraná state, Brazil

Incomplete Ionization of a 110 meV Unintentional Donor in Beta-Ga2O3 and its Effect on Power Devices (Postprint)

Science.gov (United States)

2017-10-16

Adam T. Neal Universal Technology Corporation Shin Mou AFRL/RX Roberto Lopez and Jian V. Li Texas State University Darren B...ORGANIZATION NAME(S) AND ADDRESS(ES) 8. PERFORMING ORGANIZATION REPORT NUMBER 1) Universal Technology Corp. 1270 N Fairfield Rd. Dayton, OH 45432 2) AFRL/RX...unintentional doping in Ga2O3. Previously unobserved unintentional donors in commercially available (2 ̅01) Ga2O3 substrates have been electrically

Two-parametric PT-symmetric quartic family

International Nuclear Information System (INIS)

Eremenko, Alexandre; Gabrielov, Andrei

2012-01-01

We describe a parametrization of the real spectral locus of the two-parametric family of PT-symmetric quartic oscillators. For this family, we find a parameter region where all eigenvalues are real, extending the results of Dorey et al (2007 J. Phys. A: Math Theor. 40 R205–83) and Shin (2005 J. Phys. A: Math. Gen. 38 6147–66; 2002 Commun. Math. Phys. 229 543–64). (paper)

Clinical Significance and Mechanistic Insights into Ovarian Cancer Mitochondrial Dysfunction

Science.gov (United States)

2017-05-01

the grant period. Dr Shin has also benefitted from mentorship of Dr. H.G. Wang, a collaborator on the project, and has taken advantage of career ...Grant 193394 Genetech Gynecologic Cancer (Phaeton) 4/01/2017 - 3/31/2018 0.24 cal mths Young Investigator Career Development Award $135,000...Ca(2)(+) toolkit in endothelial progenitor cells derived from cancer patients suggest alternative targets for anti-angiogenic treatment? Biochim

Detecting Gait Asymmetry with Wearable Accelerometers

Science.gov (United States)

2015-03-18

by overuse. Common overuse injuries include stress fractures , tendinitis, bursitis, fasciitis, and medial tibial stress syndrome (shin splints) [11...magnitude feature values for subject 1 are shown in (a), before and after repetitive stress injury. Magnitude and pattern features are plotted in...Dudziñski, A. Lees, M. Lake, and M. Wychowañski, “Adjustments in gait symmetry with walking speed in trans-femoral and trans- tibial amputees,” Gait

Synergy in supramolecular chemistry

CERN Document Server

Nabeshima, Tatsuya

2014-01-01

Synergy and Cooperativity in Multi-metal Supramolecular Systems, T. NabeshimaHierarchically Assembled Titanium Helicates, Markus AlbrechtSupramolecular Hosts and Catalysts Formed by Self-assembly of Multinuclear Zinc Complexes in Aqueous Solution, Shin AokiSupramolecular Assemblies Based on Interionic Interactions, H. MaedaSupramolecular Synergy in the Formation and Function of Guanosine Quadruplexes, Jeffery T. DavisOn-Surface Chirality in Porous Self-Assembled Monolayers at Liquid-Solid Interface, Kazukuni Tahar

High Power Broadband Multispectral Source on a Hybrid Silicon Chip

Science.gov (United States)

2017-03-14

optical bandwidth of the erbium-doped- fiber -amplifier with densely-spaced frequency channels. To extend the spectral capacity of the Si-on-insulator...associated with non-uniform undercut at the taper tip across the chip after wet etching the active region. Figure 14. Normalized optical emission...Hutchinson, J., Shin, J.-H., Fish, G., and Fang, A., “Integrated silicon photonic laser sources for telecom and datacom,” in [National Fiber Optic

Policing and Law Enforcement in COIN -- The Thick Blue Line

Science.gov (United States)

2009-02-01

terrorist group was by the Aum Shin Rikyo in the Tokyo subway gas attacks of 1995. This was followed by the innovative Al Qaeda attacks on the U.S...operates at the strategic level through an associa- tion of networks and franchises with a global strategy having protractedness as one of its...networked enterprises and franchises of a. terrorists, insurgents, and criminals—the strategy somewhat Maoist in application and an insurgent

(nitro substituted-phenyl)-hydrazonomethyl

Indian Academy of Sciences (India)

7.14 (d, 1H, ArH), δ 7.36 (m, 2H, ArH), δ 7.47–7.51 (m,. 2H, ArH), δ 7.77 ..... Phys. Chem. A 115 1985; (d) Kang Y, Gwon K, Shin J H, ... (a) Zhang J F, Lim C S, Bhuniya S, Cho B R and Kim. J S 2011 Org. ... Chem. Rev. 240 1; (c) Sessler J L and.

The Navy SEAL Physical Fitness Guide

Science.gov (United States)

1997-08-01

Injuries Reported by a Sample of Male Runners Injury Frequency (%) Knee 23 Achilles Tendon/Calf 16 Metatarsal 11 Hip/Groin/Toenails/Blisters 9 Plantar ... Fascia /Heel 8 Ankle Sprain 7 Shin Splints 6 Nerve/Quadriceps/Hamstring/Back 2 Run Tall Run Relaxed Run Naturally70 Running for Fitness Chapter 5...Name of Injury Description of Injury Plantar Fasciitis Inflammation and tightness of thick fibrous band on sole of foot. Achilles Tendonitis

Evaluation methods for neutron cross section standards

International Nuclear Information System (INIS)

Bhat, M.R.

1980-01-01

Methods used to evaluate the neutron cross section standards are reviewed and their relative merits, assessed. These include phase-shift analysis, R-matrix fit, and a number of other methods by Poenitz, Bhat, Kon'shin and the Bayesian or generalized least-squares procedures. The problems involved in adopting these methods for future cross section standards evaluations are considered, and the prospects for their use, discussed. 115 references, 5 figures, 3 tables

New energy vision of the Tono City area; 2001 nendo Tonoshi shin energy vision. Chiiki shin energy vision sakutei tou jigyo

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-02-01

As a leading plan to reconsider the resource consumption in large quantities and to change the society to a circulation type, a new energy vision of the Tono City area was worked out in Tono City, Iwate Prefecture. In this vision, FY 2002 was set as the first fiscal year, and FY 2010 as the target year. From the comprehensive judgement based on the objective availability, technical evaluation, civic needs, etc., biomass energy, wind energy, solar energy, etc. were made the main energy in new energy introduction. As model projects, studied were the introduction of solar energy utilization facilities to Kamigo Elementary School, introduction of the photovoltaic power generation to Aozasa Nursery School and disaster prevention base facilities, project on the wind power generation using large wind turbines, biomass alcohol plant, wood pellet production, etc. The target amount of new energy introduction was 2,640 kW in photovoltaic power generation, 19,000 kW in wind power generation, etc. The CO2 reduction amount including that in heat utilization, clean energy car, etc. was 41,374 t-CO2/y. (NEDO)

A Development Method of Mobile Computerized Procedure System for the Cooperation among Field Workers and Main Control Room Operators in Korean Nuclear Power Plants

International Nuclear Information System (INIS)

Lee, Sun Jin; Seong, No Kyu; Jung, Yeon Sub

2014-01-01

Human errors can occur during the test and maintenance of steam generator, safety injection system and other various systems and devices in nuclear power plants (NPPs). Most of human errors can be improved by the human error prevention techniques such as self-check, peer-check, concurrent verification and etc. Another important technique is to share work information among main control room (MCR) operators and field workers. Various field service automation tools have been developed with recent information technology in many countries. APR1400 computerized procedure system (CPS) has been developed for the MCR operators of Shin-Kori 3 and 4 units. Especially, the concurrent verification support design is applied in the construction project of Shin-Hanul 1 and 2 CPS. It is expected that the proposed mobile CPS can enhance the reduction of human errors by supporting human error prevention techniques and information sharing. This paper describes the technical issues of the mobile CPS (mobile CPS) in the initial development stage. Based on the design of APR1400, CRI CPS has been developed and operated for SKN 3 and 4 HFE V and V and license test for the MCR operating staff. Therefore the mobile CPS will be developed by upgrading the CRI CPS with improved features

Evaluation of Discrimination Indices Validity for Screening of β-Thalassemia Trait

Directory of Open Access Journals (Sweden)

Ahmadi A.

2009-11-01

Full Text Available AbstractBackground and Objectives: β-thalassemia trait (β-TT and iron deficiency anemia (IDA are the most common forms of microcytic anemia. Screening of β-thalassemia trait is important for medical counseling before marriage and preventing β-thalassemia major birth results. The most common problem in screening -TT is differentiating it from IDA. The aim of this study was to define the sensitivity, specificity, and predictive values of some discrimination indices for screening of β-TT in a sample of such patients.Methods: A total of 82 patients with microcytic anemia (MCV< 80 fl were selected from Namazi Hospital, Shiraz, Iran, and 9 discrimination indices were calculated for them. The patients were divided intotwo groups: 42 patients with β-TT and 40 patients with IDA. The sensitivity, specificity, positive and negative predictive values and Youden,s index of each discrimination index were calculated for screening β-TT.Results: None of the discrimination indices showed 100% of sensitivity and specificity. But the Shin and Lal index, RDW index and RBC count showed the highest and valuable value for screening β-TT.Conclusion: Some discrimination indices like Shin and Lal index, RDW index and RBC index are valuable indices in screening β-TT.Keywords: Beta- Thalassemia; Anemia, Iron Deficiency.

A Development Method of Mobile Computerized Procedure System for the Cooperation among Field Workers and Main Control Room Operators in Korean Nuclear Power Plants

Energy Technology Data Exchange (ETDEWEB)

Lee, Sun Jin; Seong, No Kyu; Jung, Yeon Sub [KHNP ,Daejeon (Korea, Republic of)

2014-08-15

Human errors can occur during the test and maintenance of steam generator, safety injection system and other various systems and devices in nuclear power plants (NPPs). Most of human errors can be improved by the human error prevention techniques such as self-check, peer-check, concurrent verification and etc. Another important technique is to share work information among main control room (MCR) operators and field workers. Various field service automation tools have been developed with recent information technology in many countries. APR1400 computerized procedure system (CPS) has been developed for the MCR operators of Shin-Kori 3 and 4 units. Especially, the concurrent verification support design is applied in the construction project of Shin-Hanul 1 and 2 CPS. It is expected that the proposed mobile CPS can enhance the reduction of human errors by supporting human error prevention techniques and information sharing. This paper describes the technical issues of the mobile CPS (mobile CPS) in the initial development stage. Based on the design of APR1400, CRI CPS has been developed and operated for SKN 3 and 4 HFE V and V and license test for the MCR operating staff. Therefore the mobile CPS will be developed by upgrading the CRI CPS with improved features.

US-Korea Nanotechnology, Biotechnology, and Information Technology (NBIT) Symbiosys Program - Phase 1

Science.gov (United States)

2010-10-01

Nanostructured Materials & 6th Nanoelectronics, 19-20 May, 2009, Seoul, Korea H. Shin, “Confined Growth, Structures, and Energy Application of TiO2 ...loss. Currently, natural DNA processed from the salmon roe and milt sacs, waste products of the fishing industry, is quite abundant and relatively...powder was added to SRh aqueous solution which is normally pink in color . As seen in Fig. 7, the solution became clear and the DNA/CTMA powder (which

Thailand: Background and U.S. Relations

Science.gov (United States)

2010-06-21

practices. However, hopes for a smooth transition back to representative government were dashed as the turmoil has continued to churn in Thailand since...sale of his family’s telecommunications firm to a Singapore state company in a $1.9 billion deal that many suspected was not taxed because of...editors were dismissed, and pointing to a libel suit against an outspoken editor filed by a telecommunications corporation that Thaksin founded.26 Shin

Protection of Mission-Critical Applications from Untrusted Execution Environment: Resource Efficient Replication and Migration of Virtual Machines

Science.gov (United States)

2015-09-28

in the same LAN ; this setup resembles the typical setup in a virtualized datacenter where protected and backup hosts are connected by an internal LAN ... Virtual Machines 5a. CONTRACT NUMBER 5b. GRANT NUMBER FA9550-10-1-0393 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Kang G. Shin 5d. PROJECT...Distribution A - Approved for Public Release 13. SUPPLEMENTARY NOTES None 14. ABSTRACT Continuous replication and live migration of Virtual Machines (VMs

Nylon friction dermatitis: A distinct subset of macular amyloidosis

Directory of Open Access Journals (Sweden)

Somani V

1995-01-01

Full Text Available 43 patients were taken up for the study, all of whom were asymptomatic and presented with bluish black pigmentation. 23 patients presented with pigmentation which was proximal and distal to the bony prominences, all of whom gave a history of using nylon scrubbers during bathing. 20 patients gave no history of friction and the pigmentation was present on the extensor forearms, shins and upper back. Histopathological examination confirmed amyloid deposits.

Equatorial Ionospheric Irregularities Study from ROCSAT Data

Science.gov (United States)

2017-10-20

UNLIMITED: PB Public Release 13. SUPPLEMENTARY NOTES 14. ABSTRACT Ionospheric irregularity/scintillation occurrences can be caused by external driving ...Academia Sinica, Taipei, Taiwan e-mail: chliu2@gate.sinica.edu.tw phone :886-3-4227151x34757 CoPI: Shin-Yi Su Institution: National Central...University, Chung-Li, Taiwan e-mail: sysu@csrsr.ncu.edu.tw phone :886-3-4227151x57643 CoPI: Lung-Chi Tsai Institution: National Central University, Chung-Li

AN EPIDEMIOLOGICAL SURVEY OF OSTEOPOROTIC FRACTURES IN OLDER RESIDENTS FROM THE MIDDLE URALS

Directory of Open Access Journals (Sweden)

E. N. Gladkova

2014-01-01

Full Text Available The epidemiological characteristics of osteoporotic fractures in Russia have been inadequately studied.Objective: to estimate the incidence rate of osteoporotic fractures in the old age groups of an urban population in the Middle Urals.Subjects and methods. The survey was performed in Pervouralsk, a typical industrial town in the Middle Urals, with a total of 160,860 people, including 54,189 dwellers over 50 years of age (20,746 men and 33,443 women, which amounted to 33.7% of the general population of the town. The survey covered its residents aged 50 years and over who had fractures of the proximal hip (FPH, distal forearm (FDF, distal shin, ribs, or surgical neck of the humerusbetween 1 January 2008 and 31 December 2009. Statistical analysis was made applying the programs Biostatistics, Microsoft Excell 2007, and MedCalc (demo-version. The findings were processed using parametric and nonparametric statistical methods.Results. During two years, 1371 fractures, including FPH, FDF, fractures of the humerus, distal shin, and ribs, were registered in the examined sample of persons aged 50 years and over from Pervouralsk. 383 (27.9% of these fractures occurred in men and 988 (72.1% in women. The incidence rate of all fractures was 1265.0 per 100,000 inhabitants aged 50 years and over (1,477.1 for women and 923.1 for men. FDF were more common in women, the incidence was 787.9 cases per 100,000 population; costal fractures – in men (386.7 per 100,000. The investigation has shown that certain types of fractures are predominant in the oldest age groups. Thus, the incidence rate of FDF and fractures of the distal shin decreases while that of FPH and fractures of the humerus increaseswith age, which is likely to be due to several causes: an age-related decline in bone mass; an increase in the frequency of falls with age; muscle weakness and movement discoordination, which alter the mechanism of fall and increase the risk of femoral and

Analysis for Human-related Events during the Overhaul

Energy Technology Data Exchange (ETDEWEB)

Kim, Ji Tae; Kim, Min Chull; Choi, Dong Won; Lee, Durk Hun [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2011-10-15

The event frequency due to human error is decreasing among 20 operating Nuclear Power Plants (NPPs) excluding the NPP (Shin-Kori unit-1) in the commissioning stage since 2008. However, the events due to human error during an overhaul (O/H) occur annually (see Table I). An analysis for human-related events during the O/H was performed. Similar problems were identified for each event from the analysis and also, organizational and safety cultural factors were also identified

2012 Anthropometric Survey of U.S. Army Pilot Personnel: Methods and Summary Statistics

Science.gov (United States)

2016-05-01

center of the nipple on men Tibia - the shin bone Tragion - the juncture of the top of the cartilaginous flap of the ear with the head Tragus...of 977 men and 42 women. An augmented database of 395 women is reported for design purposes. Pilots of unmanned aircraft were not considered in this...sample here, which represents the Total Army, was composed of 977 men and 42 women, measured between November 2010 and April 2012. Results of the

2012 Anthropometric Survey of U.S. Army Personnel: Methods and Summary Statistics

Science.gov (United States)

2014-12-05

bottom of the forehead Thelion - the center of the nipple on men Tibia - the shin bone Tragion - the juncture of the top of the...three- dimensional (3-D) head, foot, and full-body scans were obtained on each subject in this study. The sample consisted of 7435 men and 3922 women...and whole-body scans, were obtained in this study. The sample here, which represents the Total Army, was composed of 4,082 men and 1,986 women

2010 Anthropometric Survey of U.S. Marine Corps Personnel: Methods and Summary Statistics

Science.gov (United States)

2013-06-01

the brow ridges above the eye sockets at the bottom of the forehead thelion - the center of the nipple on men tibia - the shin bone...obtained on each subject in this study. The sample consisted of 1301 men and 620 women. Results of the directly measured dimensions are given here...3-D) head, foot, and whole-body scans were obtained in this study. The sample consisted of 1301 men and 620 women, who were measured between May 5

Determinants of Environmental Degradation under the Perspective of Globalization: A Panel Analysis of Selected MENA Nations

OpenAIRE

Audi, Marc; Ali, Amjad

2018-01-01

This paper has examined the determinants of environmental degradation under the perspective of globalization in the case of selected MENA nations (Jordan, United Arab Emirates, Saudi Arabia, Algeria, Qatar, Lebanon, Egypt, Bahrain, Iran, Morocco, Israel, Kuwait, Oman and Tunisia) over the period of 1980 to 2013. ADF - Fisher Chi-square, Im, Pesaran and Shin W-stat, Levin, Lin & Chu t*, and PP-Fisher Chi-square unit root tests are used for analyzing the stationarity of the variables. This stud...

Selected Static Anatomic Measures Predict Overuse Injuries in Female Military Recruits

Science.gov (United States)

2010-05-01

nearest I degree. 15 1 Ober’s Test I I To measure iliotibial band ( ITB ) tightness, the subject was placed at the right edge of the exam table in...pelvis a~ a right angle to the table. If the leg settled above horizontal (intermediate) it was recorded as a positive I (tight ITB ) test. 16 Data...injuries: iliotibial band syndrome ( ITBS ), patellofemoral pain syndrome (PFPS), shin splints (SS), and plantar fasciitis (PF) during basic training

Accounting for Crises

OpenAIRE

Venky Nagar; Gwen Yu

2014-01-01

We provide among the first empirical evidence consistent with recent macro global-game crisis models, which show that the precision of public signals can coordinate crises (e.g., Angeletos and Werning, 2006; Morris and Shin, 2002, 2003). In these models, self-fulfilling crises (independent of poor fundamentals) can occur only when publicly disclosed signals of fundamentals have high precision; poor fundamentals are the sole driver of crises only in low precision settings. We find evidence con...

Relationship Between Perinatal and Neonatal Indices and Intelligence Quotient in Very Low Birth Weight Infants at the Age of 6 or 8 Years

OpenAIRE

Mu, Shu-Chi; Lin, Cheng-Hui; Chen, Yi-Ling; Chang, Chia-Han; Tsou, Kuo-Inn

2008-01-01

The majority of children born with very low birth weight (VLBW; < 1500 g) enter mainstream schools. They experience significant neurodevelopmental disabilities during childhood. The specific aims of our study were to evaluate the neonatal outcomes of VLBW infants and whether they would influence intelligence quotient (IQ), cognitive function and learning disabilities at the age of 6 or 8 years. Methods: We enrolled VLBW neonates who weighed less than 1500 g and who were delivered at Shin-K...

Antiproton-Induced Microfission

Science.gov (United States)

1994-02-21

1988. [6] Serway , Raymond A.: Physics for Scientists and Engineers, 2nd ed., Saunders College Publishing, Philadelphia, 1986. [71 Nicogossian, Arnauld...Nicholas A. and Alvin W. Trivelpiece: Principles of Plasma Physics , McGraw-Hill Book Company, New York, 1973. [25] Satori, Shin, Hitoshi Kuninaka, and... Physics 303 Osmond Laboratory AEOSR’TR- 9 4 0044•• University P rk, PA 16802 AFOSR/NE 110 Duncan Avenue, Suite B1115 Bolling AFB DC 20332-0001 2301

Association of vascular access flow with short-term and long-term mortality in chronic haemodialysis patients: a retrospective cohort study

OpenAIRE

Wu, Chung-Kuan; Wu, Chia-Lin; Lin, Chia-Hsun; Leu, Jyh-Gang; Kor, Chew-Teng; Tarng, Der-Cherng

2017-01-01

Objectives To investigate the impact of vascular access flow (Qa) on vascular and all-cause mortality in chronic haemodialysis (HD) patients. Design Observational cohort study. Setting Single centre. Participants Adult chronic HD patients at the HD unit of Shin Kong Wu Ho-Su Memorial Hospital between 1 January 2003 and 31 December 2003 were recruited. Patients were excluded if they had arteriovenous fistula or arteriovenous graft failure within 3 months before the date of Qa measurement, were...

Fiscal 1997 project on the R and D of industrial scientific technology under consignment from NEDO. Report on the results of the R and D of technologies to invent original high-functional materials (technical development of materials to heighten efficiency of power generation facilities); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Dokusoteki kokino zairyo sosei gijutsu no kenkyu kaihatsu (hatsuden shisetsuyo koseinoka zairyo gijutsu kaihatsu) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The paper described the fiscal 1997 results of the study of the condensation base precise structure control conducted as a technical development of materials to heighten efficiency of power generation facilities. Condensation base polymer is an important material which occupies most of the engineering plastics. The study is aimed at developing basic technologies on the molecular weight and regularity by which a remarkable improvement can be expected in performance of condensation polymerization/ring-opening polymerization polymer materials, polymerization catalyst which arbitarily controls the primary structure such as branch and end group structures, and development of the precision polymerization process. In the synthesis of ordered polymer by direct polycondensation, synthesis of ordered polyamide from asymmetric monomers is studied. In the synthesis of chemically selective polyamide by direct polymerization, polyamide with functional group is synthesized by polymerizing without protecting functional group the monomer with such functional group as causes side reaction in polymerization. In the synthesis of polyamide having the limited distribution of molecular weight, the molecular weight/distribution of polyamide are controlled by connectedly conducting polycondensation which is itself to be done successively. 91 refs., 72 figs., 43 tabs.

Fiscal 1997 project on the R and D of industrial scientific technology under consignment from NEDO. Report on the results of the R and D of technologies to invent original high-functional materials (development of precise structure control materials for enhancement of oil refining); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Dokusoteki kokino zairyo sosei gijutsu no kenkyu kaihatsu (sekiyu seisei kodoka seimitsu kozo seigyo zairyo kaihatsu) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The paper described the R and D of technologies for creating original high-functional materials under the R and D system of industrial scientific technology. Japan chemical Innovation Institute (JCII) is conducting intensive joint researches under consignment from NEDO with private companies, universities and national research institutes. Among those, the paper reported the fiscal 1997 results of the following two researches conducted as development of precise structure control materials for enhancement of oil refining: precision catalytic polymerization and multi-dimensional space polymer. As to the precision catalytic polymerization, the paper is aimed at developing base technologies for the molecular weight and stereoregularity by which remarkable improvement in performance of addition polymerization type polymer can be expected, and on the development of a polymerization catalyst which arbitarily controls the primary structure such as end group structure and of a precision addition polymerization process. Subthemes are addition polymerization with limit and oriented catalytic polymerization. In relation to multi-dimensional space polymer, the paper is aimed at developing highly selective polymerization technology of aromatic compounds using enzyme related catalysts and synthesis technology of regular structure polymer, and synthesis technology of new polymer group having a new chain pattern except covalent bond/new polymer group having characteristics in three-dimensional space geometric structure. 244 refs,, 160 figs., 94 tabs.

Fiscal 1996 result reports of the researches under consignment from NEDO. Developments of fuel cell technology, polymer electrolyte fuel cell, fuel cell power generation system technology, and high-voltage type several tens kW class distributed power source system; Shin energy sangyo gijutsu sogo kaihatsu kiko itaku gyomu 1996 nendo seika hokokusho. Nenryo denchi gijutsu kaihatsu, kotai kobunshigata nenryo denchi no kenkyu kaihatsu, hatsuden system gijutsu kaihatsu, koden`atsugata suju kW kyu bunsan dengen system no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

This paper precisely reports the research result on development of fuel cell technology in fiscal 1996. On verification of cell durability, the cell test result in hydrogen including CO of 100ppm using Pt-Ru catalyst as CO resistant catalyst showed that the loss percent of cell voltage decreases with an increase in Ru content. On development of stack technology, the carbon humidification plate superior in chemical stability was developed as one of the parts for layered stacks. The separator with a water- permeable carbon plate and serpentine flow fields was fabricated for highly layered stacks, and achieved the target performance in single cell power generation test. On establishment of design basis for compact fuel processor, the bench-scale test was conducted of Ru/{gamma}-Al2O3 and Pt-Ru/{gamma}-Al2O3 catalysts as advanced CO selective oxidation catalyst for CO reducers. On demonstration test for the several tens kW class stationary power plant, the system configuration of power generation plants using natural gas as fuel was studied. 106 figs., 38 tabs.

Intersectionality research in counseling psychology.

Science.gov (United States)

Grzanka, Patrick R; Santos, Carlos E; Moradi, Bonnie

2017-10-01

This article introduces the special section on intersectionality research in counseling psychology. Across the 4 manuscripts that constitute this special section, a clear theme emerges: a need to return to the roots and politics of intersectionality. Importantly, the 2 empirical articles in this special section (Jerald, Cole, Ward, & Avery, 2017; Lewis, Williams, Peppers, & Gadson, 2017) are studies of Black women's experiences: a return, so to speak, to the subject positions and social locations from which intersectionality emanates. Shin et al. (2017) explore why this focus on Black feminist thought and social justice is so important by highlighting the persistent weaknesses in how much research published in leading counseling psychology journals has tended to use intersectionality as a way to talk about multiple identities, rather than as a framework for critiquing systemic, intersecting forms of oppression and privilege. Shin and colleagues also point to the possibilities intersectionality affords us when scholars realize the transformative potential of this critical framework. Answers to this call for transformative practices are foregrounded in Moradi and Grzanka's (2017) contribution, which surveys the interdisciplinary literature on intersectionality and presents a series of guidelines for using intersectionality responsibly. We close with a discussion of issues concerning the applications of intersectionality to counseling psychology research that spans beyond the contributions of each manuscript in this special section. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Fiscal 2000 report on geothermal energy development promotion survey. Phase 1. Report on environmental impact survey in No. C-5 Appi district (Hot spa fluctuation); 2000 nendo chinetsu kaihatsu sokushin chosa hokokusho. No. C-5. Appi chiiki kankyo chosa (onsen hendo) dai 1 ji

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

For the assessment of the environmental impact to be produced by geothermal exploration well boring and short-term outburst tests, water in hot spas, fountains, and rivers in and around the Appi survey district was inspected for fluctuation. A survey was conducted of multiple components to help analysis of the geothermal reservoir structure. Distributed in the alteration zone in this district are the hot spas of Kusanoyu, Shin-Kusanoyu, Appi, and so forth, and, in the vicinity, numerous hot spas including Iwahatanoyu belonging to the Appi hot spa. In the multiple component survey, 12 hot spas, 1 fountain, 8 rivers, and 2 gas wells were subjected to measurement. In the fluctuation survey, 5 hot spas, 1 fountain, 5 rivers, and the amount of precipitation were subjected to measurement. In the survey of river bottom quality and river bed rocks, river bottom quality was checked at 18 spots and river bed rocks at 12 spots. It was found that fluctuation was great in the amount of welling water at Kusanoyu, Shin-kusanoyu, and Appi, with the coefficient of fluctuation recording 10 or more. A negative correlation was detected between the welling amount and water temperature. It is deemed that the hot water spurts out of natural fountains or shallow wells and that its temperature tends to grow lower with an increase in meteoric water by which it is diluted. (NEDO)

The Coast Artillery Journal. Volume 80, Number 1, January-February 1937

Science.gov (United States)

1937-02-01

wedjust as readily by a trail of polished shin bones left ~nthe wake of his rolling kitchens . Therefore, merely ~ Circumvent the machinations of hostile...hauls the staff of life on its last night dash to the bivouac areas of the rolling kitchens . Here the trailers are un- sealed by 5-4. No damage has...Commonwealth of wfassachusetts will present the trophy that has been awarded ro Battery A, 63d CA. ro an officer disignated ro receive it on January

An Inquiry of Intentions in Kim Hye-yong's 'First Meeting': A North Korean Short Story in Korea Today (2007).

OpenAIRE

Alzo David-West

2013-01-01

This paper examines the problem of the intentional fallacy in the North Korean short story 'First Meeting' by Kim Hye-yong. Serially published in Korea Today in 2007, the nationalist allegory centres on Shin Ch'ong-mi, a young female journalist in Pyongyang, who falls in love with her penfriend Song-u, a soldier in the Korean People's Army, and struggles to remain devoted to him when he suddenly stops writing. With the literary-critical method of counterintuitive reading, the inquiry analyses...

Molybdenum Carbide Synthesis Using Plasmas for Fuel Cells

Science.gov (United States)

2013-06-01

S. A. Hong, I. H. Oh, and S. J. Shin, “Performance and life time analysis of the kW-class PEMFC stack,” Journal of Power Sources, vol. 106, pp. 295...pp. 591–596, 1998. [25] M. Gotz and H. Wendt, “Binary and ternary anode catalyst formulations including the elements W, Sn and Mo for PEMFCs ...and R. C. Urian, “Electrocatalysis of CO Tolerance by Carbon-Supported PtMo Electrocatalysts in PEMFCs ,” Journal of Electrochemical Society, vol

Comparative pharmacokinetics of a fixed-dose combination vs concomitant administration of telmisartan and S-amlodipine in healthy adult volunteers

OpenAIRE

Oh, Minkyung; Park, Sung-Eun; Ghim, Jong-Lyul; Choi, Young-Kyung; Shim, Eon-Jeong; Shin, Jae-Gook; Kim, Eun-Young

2017-01-01

Minkyung Oh,1,2,* Sung-Eun Park,3,* Jong-Lyul Ghim,1–3 Young-Kyung Choi,1 Eon-Jeong Shim,1–3 Jae-Gook Shin,1–3 Eun-Young Kim1–3 1Department of Pharmacology, 2PharmacoGenomics Research Center, Inje University College of Medicine, Busan, 3Department of Clinical Pharmacology, Inje University Busan Paik Hospital, Busan, Republic of Korea *These authors contributed equally to this work Objective: This study compared the pharmacokinetic (PK) and safety pro...

Harm avoidance and depression, anxiety, insomnia, and migraine in fifth-year medical students in Taiwan

OpenAIRE

Chen CY; Yu NW; Huang TH; Wang WS; Fang JT

2018-01-01

Ching-Yen Chen,1–3 Nan-Wen Yu,2–4 Tien-Hao Huang,4 Wei-Shin Wang,4 Ji-Tseng Fang2,3,5 1Department of Psychiatry, Chang Gung Memorial Hospital, Keelung, Taiwan; 2School of Medicine, Chang Gung University, Taoyuan, Taiwan; 3Medical Education Research Center, Chang Gung Memorial Hospital, Taoyuan, Taiwan; 4Department of Psychiatry, Chang Gung Memorial Hospital, Linkou, Taiwan; 5Department of Nephrology, Chang Gung Memorial Hospital, Linkou, Taiwan Purpose: During medical school tra...

Harm avoidance and depression, anxiety, insomnia, and migraine in fifth-year medical students in Taiwan

OpenAIRE

Chen,Ching-Yen; Yu,Nan-Wen; Huang,Tien-Hao; Wang,Wei-Shin; Fang,Ji-Tseng

2018-01-01

Ching-Yen Chen,1–3 Nan-Wen Yu,2–4 Tien-Hao Huang,4 Wei-Shin Wang,4 Ji-Tseng Fang2,3,5 1Department of Psychiatry, Chang Gung Memorial Hospital, Keelung, Taiwan; 2School of Medicine, Chang Gung University, Taoyuan, Taiwan; 3Medical Education Research Center, Chang Gung Memorial Hospital, Taoyuan, Taiwan; 4Department of Psychiatry, Chang Gung Memorial Hospital, Linkou, Taiwan; 5Department of Nephrology, Chang Gung Memorial Hospital, Linkou, Taiwan Purpose: During medical sc...

Southeast Asia Report.

Science.gov (United States)

1984-03-15

Years (Phuah Eng Chye ; BUSINESS TIMES, 24 Jan 84) 67 Imports of Urea To Cease With Start-Up of Bintulu Plant (NEW STRAITS TIMES, 27 Jan 84) 68...Datuk Chia Chin Shin, who was later appointed an Assistant Minister for Welfare. CSO: 4200/538 61 MALAYSIA SUPP, UMNO YOUTH, WANITA OPPOSE SNAP...English 24 Jan 84 p 1 [Article by Phuah Eng Chye ] [Text] BASED on present trends, Malaysia’s pro- duction of palm oil is pro- jected to peak in 1992

Ühine tuberkuloosiprojekt Tallinnas / Rein Rannamäe, Jevgenia Epstein, Galina Kikos...[jt.

Index Scriptorium Estoniae

2001-01-01

Tallinna linnavolikogu toetas 2000. aastal oma eelarvega projekti "Koldekontrolli läbiviimine tuberkuloosi haigestunu koldes ja töökohal, kontaktsete isikute vajaduste välja selgitamine" läbiviimist

Proceedings of the Natick Science Symposium (3rd) Held in Natick, Massachusetts on 5-6 June 1990

Science.gov (United States)

1990-08-01

ring, in egg cocccn st.."Llct:’..rres, as adhesives, ar.d L""l prey capture. ’There has been scme data collected on the physical prq:::~ies of...dimi.ni.shin;J effects, such as nonenzynatic browning. For example, sugar, milk ani eggs typically added to ~ial breads to enhance acceptability are not...Chicken Stew Gravy Pork Sausage Pa~ Pork WjRice ~ Meatballs /~ Meat Balls/~ Beef I Diced W/GraV’/ Co:rned Beef Hash Chicken loaf Chicken arrl Rice

Ground deformation source model at Kuchinoerabu-jima volcano during 2006-2014 as revealed by campaign GPS observation

Science.gov (United States)

Hotta, Kohei; Iguchi, Masato

2017-12-01

We analyzed campaign Global Positioning System observation data in Kuchinoerabu-jima during 2006-2014. Most benchmarks located around Shin-dake crater showed crater-centered radial horizontal displacements. Horizontal displacements at western rim of the Shin-dake crater were tended to be larger compared to those at eastern rim. In addition, benchmark KUC14 which locates near the cliff at Furu-dake showed westward horizontal displacement rather than crater-centered radial (southward) one. Meanwhile, small displacements were detected at the benchmarks located at the foot of Kuchinoerabu-jima. We modeled the observed displacements applying a finite element method. We set entire FE domain as 100 × 100 × 50 km3. We set top of the domain as a free surface, and sides and bottom to be fixed boundaries. Topography was introduced in the area within Kuchinoerabu-jima using digital elevation model data provided by Kagoshima prefecture and elevation information from Google earth, and elevation of the outside area was assumed to be sea level. We assumed a stratified structure based on a one-dimensional P-wave velocity structure. We applied a vertical spheroid source model and searched optimal values of horizontal location, depth, equatorial and polar radiuses, and internal pressure change of the source using the forward modeling method. A spherical source with a radius of 50 m was obtained beneath the Shin-dake crater at a depth of 400 m above sea level. The internal pressure increase of 361 MPa yields its volume increase of 31,700 m3. Taking effects of topography and heterogeneity of ground into account allowed reproduction of overall deformation in Kuchinoerabu-jima. The location of deformation source coincides with hypocenters of shallow volcano-tectonic (VT) earthquakes and the aquifer estimated from a two-dimensional resistivity model by audio-frequency magnetotellurics method. The obtained deformation source may be corresponding to the pressurized aquifer, and shallow VT

Mobile Computerized Procedure System for the Improved Situation Awareness among Field Workers and Main Control Room Operators

International Nuclear Information System (INIS)

Lee, Sungjin; Seong, Nokyu; Jung, Yeonsub

2013-01-01

This paper explains the technical issues of the mobile CPS (m-CPS) in the conceptual development stage. The proposed m-CPS can be developed with many recent technologies in the various industry fields based on CRI CPS. Performance and stability of CRI CPS have been tested several times until now. It is expected that more human errors can be reduced by the m-CPS through improved situation awareness and human performance tools for local workers and MCR operators. Some considerations as well as mentioned ones will be reflected in the m-CPS development. Human errors can occur during the test and maintenance of the generator, safety injection system and reactor coolant inventory in nuclear power plants (NPPs). Most of human errors have been occurred by the omission of the prevention techniques such as the self-check, the peer-check, the concurrent verification and etc. Another important reason is the insufficient information sharing among main control room (MCR) operators and field workers. Various field service automation tools have been developed with recent information technology in many countries. APR1400 computerized procedure system (CPS) has been developed for the MCR operators of Shin-Kori 3 and 4 units. Especially, the concurrent verification support design is applied in the construction project of Shin-Hanul 1 and 2 CPS. KHNP central research institute (CRI) expects that the extended application of CPS including the field activity, that is a kind of mobile CPS, can enhance the reduction of human errors

The Status that the program to relieve set-point for the number of operable ICIs is applied to OPR1000

Energy Technology Data Exchange (ETDEWEB)

Roh, Kyung-ho; Moon, Sang-rae [KHNP, Daejeon (Korea, Republic of)

2016-10-15

The Core Operating Limit Supervisory System (COLSS) of OPR1000 monitors in-core neutron power distribution, Linear Heat Rate (LHR) and Departure from Nucleate Boiling Ratio (DNBR) using In-Core Instrumentation (ICI). It is required that above 75% of ICI be operable to perform this functions. 45 EA strings of ICI have been installed and operated in Hanbit no.3, 4, 5, 6 and Hanul no. 3, 4, 5, 6. Their signals are transferred to Plant Monitoring System (PMS) via four Plant Data Acquisition System (PDAS) channels. PMS includes a few application programs like COLSS. In a case that one of 4 PDAS channels fails, COLSS is inoperable. It means that reactor power should be reduced and monitored by CPCS because FSAR of OPR1000 requires that 75% ICIs should be operable. This action can induce transient of reactor core. In order to complement such a trouble, KHNP, KEPCO NF and KEPCO ENC have proposed the way that COLSS can be operable though operable ICIs exist between 60% - 75%. KHNP, KEPCONF and KEPCO ENC have proposed the way that COLSS can be operable though operable ICIs exist between 60% - 75%. Conservatively, the analysis was performed assuming 50% ICIs are inoperable. Though 50% ICIs are inoperable, the power distribution of COLSS is more accurate than that of CPC. The technology was applied to OPR1000s based on above technical background. Shin-Kori no.1, 2 and Shin-Wolsong no.1, 2 are waiting for an application.

Characterization of PEO coatings on aluminium in the presence of silver

Energy Technology Data Exchange (ETDEWEB)

Rodrigues, Andressa; Gaspar, Marco Antonio Albuquerque; Santos, Janaina S.; Mambrini, Giovanni Pimenta; Trivinho-Strixino, Francisco, E-mail: dre.rodrigues27@gmail.com [Universidade Federal de Sao Carlos (UFSCar), Sorocaba, SP (Brazil)

2016-07-01

Full text: Plasma electrolytic oxidation (PEO) is an electrochemical technique used to produce oxide coatings on metals that improves the mechanical resistance and corrosion protection. The metal is oxidized (anodized) under high electric field producing an oxide film layer on metal surface [1]. The electrical discharges on the electrode surface promotes the crystallization of the oxide film. In this study, Al{sub 2}O{sub 3} films were produced via Al anodization in conditions of PEO in the presence of silver in the electrolyte. The silver presents bactericidal properties and low toxicity for humans [2]. The Al anodization were performed at in silicate electrolytes in the presence Ag{sup +} ions and Ag nanoparticles using a 20mA/cm² current density. A low cost aluminium was used as substrate. The effect of PEO on Ag nanoparticles was also investigated. The oxide films were characterized by scanning electron microscopy (SEM), energy dispersive X-ray of radiation (EDX) and X-ray diffraction (XRD). The SEM micrographs revealed an irregular porous structure. EDX microanalysis showed a silver incorporation of 0,15-0,31% over oxide surface. The silicate concentration influenced the morphology and composition of the oxide films. References: [1] A.L. Yerokhin, X. Nie, A. Leyland, A. Matthews, S.J. Dowey, Surface & Coatings Technology, 122 (1999) 73-93. [2] K.R. Shin, Y.S. Kim, G.W. Kim, H.W. Yang, Y.G. Ko, D.H. Shin. Applied Surface Science, 347 (2015) 574-582. (author)

Examining injury risk and pain perception in runners using minimalist footwear.

Science.gov (United States)

Ryan, Michael; Elashi, Maha; Newsham-West, Richard; Taunton, Jack

2014-08-01

This study examines the effect of progressive increases in footwear minimalism on injury incidence and pain perception in recreational runners. One hundred and three runners with neutral or mild pronation were randomly assigned a neutral (Nike Pegasus 28), partial minimalist (Nike Free 3.0 V2) or full minimalist shoe (Vibram 5-Finger Bikila). Runners underwent baseline testing to record training and injury history, as well as selected anthropometric measurements, before starting a 12-week training programme in preparation for a 10 km event. Outcome measures included number of injury events, Foot and Ankle Disability (FADI) scores and visual analogue scale pain rating scales for regional and overall pain with running. 99 runners were included in final analysis with 23 injuries reported; the neutral shoe reporting the fewest injuries (4) and the partial minimalist shoe (12) the most. The partial minimalist shoe reported a significantly higher rate of injury incidence throughout the 12-week period. Runners in the full minimalist group reported greater shin and calf pain. Running in minimalist footwear appears to increase the likelihood of experiencing an injury, with full minimalist designs specifically increasing pain at the shin and calf. Clinicians should exercise caution when recommending minimalist footwear to runners otherwise new to this footwear category who are preparing for a 10 km event. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Regional new energy vision for Soryo Town, Hiroshima Prefecture; 2001 nendo Soryo cho chiiki shin energy vision. Chiiki shin energy vision sakutei tou jigyo

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-02-01

A regional new energy vision was formulated for the town for 'contributing to the solution of environmental problems' and 'contributing to the reenergization of the regional community through utilizing resources in the region.' The final energy consumption of the town is 103,315 times 10{sup 3} MJ, with the transportation sector accounting for a percentage higher than the nation-wide average. The town is characterized in that it has but a small number of manufacturers, offices, or stores. As for new energy, it was estimated that 9117 times 10{sup 3} MJ/year would be gained by methanol produced from cultured weed, 5696 times 10{sup 3} MJ/year by medium/small-scale hydropower generation, 5,233 times 10{sup 3} MJ/year by photovoltaic power generation, and so forth. New energy introduction projects were discussed, which included medium/small-scale hydropower generation at a counter dam; the introduction of photovoltaic power into principal public facilities, general households, and agricultural facilities; introduction of solar heat appliances into principal public facilities and general households; introduction of clean energy automobiles into the town office and general households; and the introduction of pellet-fired stoves into principal public facilities and general households. (NEDO)

Regional new energy vision formulated for Murakami City; 2001 nendo Murakami shi chiiki shin energy vision sakutei tou jigyo. Murakami shi shin energy puran

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-03-01

For promoting the introduction of new energy and for enhancing people's consciousness of such at Murakami City, Niigata Prefecture, surveys and studies were conducted involving energy consumption in the town, the amount of new energy resources in existence, and new energy introduction projects, and a vision was formulated. The annual energy consumption of the city is estimated at 78,000 kL in terms of oil. The residential/commercial sector consumes 24,000 kL, the industrial sector 28,000 kL, and the transportation sector 26,000 kL, with the three sectors demanding similar amounts. The carbon dioxide emitted by the sectors is estimated at 223,000 t-CO2/year. New energy introduction projects were discussed, which included hot water supply, heating, road heating, and power generation, all these utilizing heat from the Senami hot spa; biogas fueled power generation and BDF (bio-diesel) bus operation in the Senami hot spa district; the introduction of a hybrid wind power/photovoltaic power generation system into Ogata Seaside Park; the introduction of a mini-scale hydroelectric power generation system into the Kamikaifu district; a large-scale wind power generation business at the Iwafune district; the introduction of wind power and photovoltaic power generation facilities into primary and junior high schools; the use of clean energy vehicles for official use; and so forth. (NEDO)

The Improved Methods of Critical Component Classification for the SSCs of New NPP

International Nuclear Information System (INIS)

Lee, Sang Dae; Yeom, Dong Un; Hyun, Jin Woo

2010-01-01

Functional Importance Determination (FID) process classifies the components of a plant into four groups: Critical A, Critical B, Minor and No Impact. The output of FID can be used as the decision-making tool for maintenance work priority and the input data for preventive maintenance implementation. FID applied to new Nuclear Power Plant (NPP) can be accomplished by utilizing the function analysis results and safety significance determination results of Maintenance Rule (MR) program. Using Shin-Kori NPP as an example, this paper proposes the advanced critical component classification methods for FID utilizing MR scoping results

Effect of Obesity and Chronic Inflammation on TRAIL-Based Immunotherapy for Advanced Breast Cancer

Science.gov (United States)

2015-04-01

primary tumor outgrowth or metastatic lung tumor burdens as measured by calipers (primary tumors) or IVIS Bioluminescent imaging of excised lungs...excised lungs IVIS T o ta l F lu x (p h o to n s/ se c) day 7 day 14 day 21 0 5000 10000 15000 DIO NW No Tumor 9 Ad5-TRAIL/CpG therapy eradicates...resistance. J Clin Invest, 112: 1821, 2003 3. Lee , I. S., Shin, G., Choue, R.: Shifts in diet from high fat to high carbohydrate improved levels of

Erythema a computatro.

Science.gov (United States)

Gauglitz, G G; Ruzicka, T; Herzinger, T

2013-01-01

Historically, erythema ab igne (EAI) was commonly seen on the shins of individuals working in front of coal stoves or sitting close to a fireplace. In the more recent past, this condition has been primarily observed after repeated application of heating pads. Today, unintentional and unperceived exposure to heat from laptop computers needs to be considered as a potential trigger. A rising number of laptop-induced cases of EAI have been reported recently. For this modern-age version of classic EAI, we propose thus the more accurate neo-Latin term erythema a computatro.

Analysis of myo-inositol hexakisphosphate hydrolysis by Bacillus phytase

DEFF Research Database (Denmark)

Kerovuo, J.; Rouvinen, J.; Hatzack, Frank-Andreas

2000-01-01

Phytic acid (myo-inositol hexakisphosphate, InsP(6)) hydrolysis by Bacillus phytase (PhyC) was studied. The enzyme hydrolyses only three phosphates from phytic acid. Moreover, the enzyme seems to prefer the hydrolysis of every second phosphate over that of adjacent ones. Furthermore, it is very...... a reaction mechanism different from that of other phytases. By combining the data presented in this study with (1) structural information obtained from the crystal structure of Bacillus amyloliquefaciens phytase [Ha, Oh, Shin, Kim, Oh, Kim, Choi and Oh (2000) Nat. Struct. Biol. 7, 147-153], and (2) computer...

International Conference on Indium Phosphide and Related Materials, Held in Cape Cod, Massachusetts, on 11 - 15 May 1997.

Science.gov (United States)

1998-01-14

used to induce the WSE. 8 I. Bar-Joseph, K. W. Goossen , J. M. Kuo, R. F. Kopf, D. A. B. Miller, and D. S. Chemla, IV. Summary Appl. Phys. Lett. 55, 340...epitaxy," Appl. Phys. Lett., Vol. 70, pp. 96-98, 2848, June 1992 January 1997 (2) K. W. Goossen , J. E. Cunningham, M. B. Santos, and (11) K. K Loi...References I Dallesasse J.M., Holonyack N., Sugg A.R., Richard T.A., El-Zein N., Appl. Phys. Lett. 57, (1990) 2844. 2 Huffaker D.L., Shin J., Deppe D.G

Comparison of the results of the fifth dynamic AER benchmark-a benchmark for coupled thermohydraulic system/three-dimensional hexagonal kinetic core models

International Nuclear Information System (INIS)

Kliem, S.

1998-01-01

The fifth dynamic benchmark was defined at seventh AER-Symposium, held in Hoernitz, Germany in 1997. It is the first benchmark for coupled thermohydraulic system/three-dimensional hexagonal neutron kinetic core models. In this benchmark the interaction between the components of a WWER-440 NPP with the reactor core has been investigated. The initiating event is a symmetrical break of the main steam header at the end of the first fuel cycle and hot shutdown conditions with one control rod group stucking. This break causes an overcooling of the primary circuit. During this overcooling the scram reactivity is compensated and the scrammed reactor becomes re critical. The calculation was continued until the highly-borated water from the high pressure injection system terminated the power excursion. Each participant used own best-estimate nuclear cross section data. Only the initial subcriticality at the beginning of the transient was given. Solutions were received from Kurchatov Institute Russia with the code BIPR8/ATHLET, VTT Energy Finland with HEXTRAN/SMABRE, NRI Rez Czech Republic with DYN3/ATHLET, KFKI Budapest Hungary with KIKO3D/ATHLET and from FZR Germany with the code DYN3D/ATHLET.In this paper the results are compared. Beside the comparison of global results, the behaviour of several thermohydraulic and neutron kinetic parameters is presented to discuss the revealed differences between the solutions.(Authors)

Fiscal 1997 project on the R and D of industrial scientific technology under consignment form NEDO. Report on the results of the R and D of technologies to invent original high-functional materials (technical development of structure control materials / R and D of molecular harmonized materials); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Dokusoteki kokino zairyo sosei gijutsu no kenkyu kaihatsu (kozo seigyo zairyo gijutsu kaihatsu) bunshi kyocho zairyo no kenkyu kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

By establishing microtechnology using molecular-level bottoming-up (molecular harmonization) by imitating the system of living organism, the paper described the R and D of molecular harmonized materials aiming at developing high-functional/high-performance materials such as high-performance catalyst, photo-information functional materials and sensing materials. Under consignment from NEDO, Japan Chemical innovation Institute started the 5-year plan in fiscal 1997. Self-assembled molecular films, in which organic molecules are orderly arranged by self-assembly, aim at developing new memory/optical/sensing materials. Mesophase materials which are such materials as liquid crystal showing the intermediate state between solid and liquid, develop optical/photoconductive materials using precise molecular orientation controllability. Macroporous materials are such substances as zeolite having molecular size micro pores. The paper aims at establishment of synthesis techniques of them and development of high-performance catalyst, etc. using them. In the comprehensive investigational research, conducted was a survey of the trend overseas in addition to a study of subjects in question. Further, the supporting basic study was reconsigned to universities, etc. 57 refs., 62 figs., 17 tabs.

New alloys for structural application. Kikai kozoyo shin kinzoku zairyo

Energy Technology Data Exchange (ETDEWEB)

Suzuki, T [Kogakuin Univ., Tokyo (Japan)

1993-01-15

As recent advance on the scientific technologies is amazing, the materials having new function or excellent performance have been developed. Speaking on some recent examples, they can be divided roughly to one group belonging to invention of materials themselves such as oxide superconductors and compounds semi-conductors, and the other belonging to the products as invention of epoc-making material manufacturing methods such as noncrystalline alloys and particle dispersion reinforced alloys (ODS). In this report, first, some new metallic materials introduced relatively recently and converting many technical innovations in wide range of machinery field, such as titanium alloys, refractory alloys having nickel group, aluminium-lithium alloys, HSLA steels composed of reduced weight of alloy elements and having higher strengths than those of carbon-steels and various properties, intermetallic materials such as Ni3Al and others are described, and next, mechanical alloying and its particle dispersion reinforced alloys, liquid phase rapid cooling process and its noncrystalline alloy-rapid cooling cohesion powder sintering alloys, and others are summarized under the paths from their birth to present status. 31 refs., 12 figs., 5 tabs.

The medial tibial stress syndrome. A cause of shin splints.

Science.gov (United States)

Mubarak, S J; Gould, R N; Lee, Y F; Schmidt, D A; Hargens, A R

1982-01-01

The medial tibial stress syndrome is a symptom complex seen in athletes who complain of exercise-induced pain along the distal posterior-medial aspect of the tibia. Intramuscular pressures within the posterior compartments of the leg were measured in 12 patients with this disorder. These pressures were not elevated and therefore this syndrome is a not a compartment syndrome. Available information suggests that the medial tibial stress syndrome most likely represents a periostitis at this location of the leg.

Automatic tea service machine with instantaneous cooling unit; Shunkan reikyaku kiko tosai jido kyuchaki

Energy Technology Data Exchange (ETDEWEB)

Sato, T.; Nishiyama, A. [Fuji Denki Reiki Co. Ltd., Tokyo (Japan)

1999-08-10

The market of automatic tea service machines demands sanitation, reduction in time required for pouring tea, feeding the material, cleaning the inside of the machine, the maintenance and service of the machine, and excellent design. To meet these demands, Fuji Electric has changed the former configuration and components for functions and has developed a new series of instantaneous automatic tea service machines based on a new concept. This paper outlines the advantages of the instantaneous cooling tank and improvements in handling. (author)

Progress of Design Improvements for APR1400 Computerized Procedure System from HFE V and V results and Design Experience

International Nuclear Information System (INIS)

Lee, Sungjin; Seong, Nokyu

2015-01-01

This study shows major already improved design features from the above three processes and a design proposal for to-be-improving items. APR1400 CPS has been verified and validated by the HFE process, internal design review and site acceptance tests. APR1400 Computerized Procedure System (CPS) has been applied to Shin-Kori Nuclear Power Plant (SKN) 3 and 4 units, Shin-Hanul Nuclear Power Plant (SHN) 1 and 2 units and Baraka Nuclear Power Plant (BNPP) 1, 2, 3 and 4 units. Since APR1400 CPS is a first-of-a-kind (FOAK) human machine interface (HMI) for executing a computerized procedure in the nuclear power plant's main control room in South Korea, it has been continuously improved through a) the human factor engineering (HFE) verification and validation (V and V), b) the internal design review and c) prototype tests. Human engineering discrepancies (HEDs) can be identified by the HFE V and V activity. Some HEDs of APR1400 CPS for SKN 3 and 4 and SHN 1 and 2 have been adopted as a role of design improvement in the CPS system while others were regarded as an operator training requirement or part of task contents. Various requests for improving the CPS have been collected from those results. A HMI system should be improved continuously for removing potential defects. Some of introduced design features in this paper has been adopted for APR1400 nuclear power plants. Some of them are under the review in the CPS design team of KHNP

Translation of the Chinese Menu from the Perspective of Food Culture

Institute of Scientific and Technical Information of China (English)

汪平心

2015-01-01

Chinese food culture is similar to a pearl shinning in this era of globalization.Due to a higher frequency of cross-cultural communication than ever before,people from western countries show increasing interests in Chinese cuisine.Therefore,a standardized translation of the Chinese menu plays a more indispensible role in grasping the precise understanding of Chinese food names for foreign diners.From a cultural perspective,this paper primarily discusses various differences between Chinese and Western food cultures,and provides major translation principles and tips of the Chinese menu so as to arrive at a standardized translation as clearly and accessibly as possible.

Translation of the Chinese Menu from the Perspective of Food Culture

Institute of Scientific and Technical Information of China (English)

汪平心

2015-01-01

Chinese food culture is similar to a pearl shinning in this era of globalization. Due to a higher frequency of cross-cultural communication than ever before, people from western countries show increasing interests in Chinese cuisine. Therefore, a standardized translation of the Chinese menu plays a more indispensible role in grasping the precise understanding of Chinese food names for foreign diners. From a cultural perspective, this paper primarily discusses various differences between Chinese and Western food cultures, and provides major translation principles and tips of the Chinese menu so as to arrive at a standardized translation as clearly and accessibly as possible.

THE TYPES OF PLANS AND INTERIOR DESIGN AT MEMORIAL CLOISTERS OF DAITOKU-JI AND MYOSHIN-JI TEMPLES IN KYOTO IN THE EDO PERIOD [1596~1868] -The Development and Changes of the Sanctuary-

Directory of Open Access Journals (Sweden)

Antariksa Antariksa

2003-01-01

Full Text Available In the early Edo period the number of memorial cloisters (tacchu increased, especially, at Daitoku-ji and Myôshin-ji temples. As a consequence, the hondô (kyakuden, hojo were further developed in all aspects of architectural style, interior design and plan. This study will attempt to clarify the types of plans at memorial cloisters of both temples, by analyzing the arrangement and composition of the sanctuary, during the Edo period. In that period, the requirement of the rooms was interlaced with the function, and even dependent upon everyday life and the activities of religious services.

The demand for gasoline in South Africa. An empirical analysis using co-integration techniques

International Nuclear Information System (INIS)

Akinboade, Oludele A.; Ziramba, Emmanuel; Kumo, Wolassa L.

2008-01-01

Using the recently developed Autoregressive Distributed Lag (ARDL) bound testing approach to co-integration, suggested by Pesaran et al. (Pesaran, M.H., Shin, Y., Smith, R.J. Bounds Testing Approaches to the Analysis of Level Relationships. Journal of Applied Econometrics 2001; 16(3) 289-326), we empirically analyzed the long-run relationship among the variables in the aggregate gasoline demand function over the period 1978-2005. Our study confirms the existence of a co-integrating relationship. The estimated price and income elasticities of - 0.47 and 0.36 imply that gasoline demand in South Africa is price and income inelastic. (author)

Erythema a computatro

Directory of Open Access Journals (Sweden)

G.G. Gauglitz

2013-03-01

Full Text Available Historically, erythema ab igne (EAI was commonly seen on the shins of individuals working in front of coal stoves or sitting close to a fireplace. In the more recent past, this condition has been primarily observed after repeated application of heating pads. Today, unintentional and unperceived exposure to heat from laptop computers needs to be considered as a potential trigger. A rising number of laptop-induced cases of EAI have been reported recently. For this modern-age version of classic EAI, we propose thus the more accurate neo-Latin term erythema a computatro.

The demand for gasoline in South Africa. An empirical analysis using co-integration techniques

Energy Technology Data Exchange (ETDEWEB)

Akinboade, Oludele A.; Ziramba, Emmanuel; Kumo, Wolassa L. [Department of Economics, University of South Africa, P.O.Box 392, Pretoria 0003 (South Africa)

2008-11-15

Using the recently developed Autoregressive Distributed Lag (ARDL) bound testing approach to co-integration, suggested by Pesaran et al. (Pesaran, M.H., Shin, Y., Smith, R.J. Bounds Testing Approaches to the Analysis of Level Relationships. Journal of Applied Econometrics 2001; 16(3) 289-326), we empirically analyzed the long-run relationship among the variables in the aggregate gasoline demand function over the period 1978-2005. Our study confirms the existence of a co-integrating relationship. The estimated price and income elasticities of - 0.47 and 0.36 imply that gasoline demand in South Africa is price and income inelastic. (author)

Fluorinated Materials for Air-stable and Moisture-resistant Flexible Optoelectronics

Science.gov (United States)

2014-01-02

Kim Jong , H.; Shin, S.; Yang, H.; An, B.-K.; Yang, L.; Park Soo, Y. Adv Mater 2012, 24, 911-915; (c) Geng, Y.; Li, H.-B.; Wu, S.-X.; Su, Z.-M. J...Park, J.-U.; Shir, D. J.-L.; Nam , Y.-S.; Jeon, S.; Rogers, J. A. Chem. Rev. 2007, 107, 1117-1160; (g) Murphy, A. R.; Frechet, J. M. J. Chem. Rev. 2007...2649-2655; (w) Song, H.-J.; Kim , D.-H.; Lee, E.-J.; Heo, S.-W.; Lee, J.-Y.; Moon, D.-K. Macromolecules (Washington, DC, U. S.) 2012, 45, 7815- 7822; (x

Dibujos animados : estereotipos de género

OpenAIRE

Reig, Ramón; Mancinas Chávez, Rosalba

2010-01-01

El presente trabajo es el resultado de un análisis del papel de la mujer en los dibujos animados que se emiten en la televisión española. Se han elegido como objeto de estudio las series norteamericanas Los Simpson y Padre de Familia y las series japonesas Doraemon y Shin Chan. El objetivo ha sido analizar el mensaje que tales series proyectan en relación, sobre todo, con las protagonistas -madres de familia- de las series citadas. El análisis de estereotipos de género en los medios de comuni...

Sports nuclear medicine. Bone imaging for lower extremity pain in athletes

International Nuclear Information System (INIS)

Brill, D.R.

1983-01-01

Increased participation in sports by the general public has led to an increase in sports-induced injuries, including stress fractures, shin splints, arthritis, and a host of musculotendinous maladies. Bone scintigraphy with Tc-99m MDP has been used with increasing frequency in detecting stress fractures, but this study can miss certain important conditions and detect other lesions of lesser clinical significance. This paper demonstrates the spectrum of findings on bone scanning in nonacute sports trauma and offers suggestions for the optimal use of Tc-99m MDP for detecting the causes of lower extremity pain in athletes

Design development of steel plate concrete modularization for the advanced PWR in Korea

International Nuclear Information System (INIS)

Mun, Taeyoup; Kim, Keunkyeong; Sun, Wonsang; Kim, Taeyoung; Hwang, Geunha

2008-01-01

APR1400 TM - an advanced PWR - has been developed in Korea since 1992. Four APR1400 units - Shin Kori no.3,4 and Shin Uljin no.1,2 - are going to be built in a next decade. As for economical efficiency, construction cost per power generation Unit(W) is improved more than 10% compared to the former 1,000 MWe PWRs. Moreover, life-cycle maintenance cost is reduced to the world's most level. For construction period from first concrete pouring to commercial operation, 54 months for APR1400 and 36 months for n-th unit have been projected. Reduction of the construction term of the Nuclear Power Plant has been emphasized increasingly for the NPP construction Project because it would reduce the interest cost and uncertainty of the project. The reduction can also advance the return of investment. Some of the PPM(Prefabrication, Preassembly, and Modularization) techniques have been studied for the shortening the construction period of nuclear power plant. Especially for the internal structure of reactor containment building (RCB) in PWR whose term of construction is critical to the whole project, Steel Plate Concrete(SC) structure has been studied as one of alternative structural systems to the conventional Reinforced Concrete(RC) structure in APR1400. SC structure is considered appropriate for the modularization of the structure with its self-supporting. In addition, formwork can be dramatically eliminated when SC structural modules are used. The MKE (Ministry of Knowledge Economy) and KHNP (Korea Hydro and Nuclear Power Co., Ltd.) initiated the research and development of SC Structure in 2005. This paper presents design examples along with Codes and Standards of SC structure in nuclear power plant. (author)

Development of Core Simulator (CoSi) for APR1400 And Analysis of LPPT Result using APR1400-CoSi

International Nuclear Information System (INIS)

Moon, Sang-Rae; Kim, Yong-Bae; Lee, Eun-Ki

2014-01-01

According to NRC guidelines, Low Power Physics Test (LPPT) is required to be performed in low temperature/low pressure (160 .deg. C/42.2 kg/cm 2 ) as well as NOT/NOP (291.3 .deg. C/158.2 kg/cm 2 ) because Shin-Kori Unit 3 is FOAK nuclear power plant. Low Power Physics Test (LPPT) is essential to verify the nuclear design and robustness of reactor safety. LPPT consists of initial criticality, Point of Adding Heat (POAH), All Rod Out (ARO) Boron Concentration, Isothermal Temperature Coefficient (ITC), Control Rod Worth measurements and so on. KHNP-CRI has developed the Core Simulator for APR1400 (APR1400-CoSi) in order to improve the ability performing the LPPT. Especially, APR1400-CoSi has enhanced capability to calculate the full Core neutronic parameters by revising RAST-K that is three dimensional real time core kinetic program. APR1400-CoSi has been developed for education-training of Low Power Physics Test(LPPT). Particularly, APR1400-CoSi has an enhanced capability to calculate the full core neutronic parameters by revising RAST-K which is a three dimensional real time core kinetics program. Low Power Physics Test (LPPT) was performed using APR1400-CoSi and the results showed very similar values with the predicted ones. In other words, the initial core model of Shin-Kori Unit 3 in APR1400-CoSi system has been verified to be appropriate enough. Also, it was confirmed that the test range of Low Power Physics Test (LPPT) reamains effective even though the largest incremental bank reactivity is inserted in core by analyzing the power change during the rod SWAP test

Cosmic Ray Acceleration by a Versatile Family of Galactic Wind Termination Shocks

Energy Technology Data Exchange (ETDEWEB)

Bustard, Chad; Zweibel, Ellen G. [Physics Department, University of Wisconsin–Madison, 1150 University Avenue, Madison, WI 53706 (United States); Cotter, Cory, E-mail: bustard@wisc.edu [Department of Astronomy, University of Wisconsin–Madison, 2535 Sterling Hall, 475 N. Charter Street, Madison, WI 53706 (United States)

2017-01-20

There are two distinct breaks in the cosmic ray (CR) spectrum: the so-called “knee” around 3 × 10{sup 15} eV and the so-called “ankle” around 10{sup 18} eV. Diffusive shock acceleration (DSA) at supernova remnant (SNR) shock fronts is thought to accelerate galactic CRs to energies below the knee, while an extragalactic origin is presumed for CRs with energies beyond the ankle. CRs with energies between 3 × 10{sup 15} and 10{sup 18} eV, which we dub the “shin,” have an unknown origin. It has been proposed that DSA at galactic wind termination shocks, rather than at SNR shocks, may accelerate CRs to these energies. This paper uses the galactic wind model of Bustard et al. to analyze whether galactic wind termination shocks may accelerate CRs to shin energies within a reasonable acceleration time and whether such CRs can subsequently diffuse back to the Galaxy. We argue for acceleration times on the order of 100 Myr rather than a few billion years, as assumed in some previous works, and we discuss prospects for magnetic field amplification at the shock front. Ultimately, we generously assume that the magnetic field is amplified to equipartition. This formalism allows us to obtain analytic formulae, applicable to any wind model, for CR acceleration. Even with generous assumptions, we find that very high wind velocities are required to set up the necessary conditions for acceleration beyond 10{sup 17} eV. We also estimate the luminosities of CRs accelerated by outflow termination shocks, including estimates for the Milky Way wind.

Chronic shin splints. Classification and management of medial tibial stress syndrome.

Science.gov (United States)

Detmer, D E

1986-01-01

A clinical classification and treatment programme has been developed for chronic medial tibial stress syndrome. Medial tibial stress syndrome has been reported to be either tibial stress fracture or microfracture, tibial periostitis, or distal deep posterior chronic compartment syndrome. Three chronic types exist and may coexist: Type I (tibial microfracture, bone stress reaction or cortical fracture); type II (periostalgia from chronic avulsion of the periosteum at the periosteal-fascial junction); and type III (chronic compartment syndrome syndrome). Type I disease is treated nonoperatively. Operations for resistant types II and III medial tibial stress syndrome were performed in 41 patients. Bilaterality was common (type II, 50% type III, 88%). Seven had coexistent type II/III; one had type I/II. Preoperative symptoms averaged 24 months in type II, 6 months in type III, and 33 months in types II/III. Mean age was 22 years (15 to 51). Resting compartment pressures were normal in type II (mean 12 mm Hg) and elevated in type III and type II/III (mean 23 mm Hg). Type II and type II/III patients received fasciotomy plus periosteal cauterisation. Type III patients had fasciotomy only. All procedures were performed on an outpatient basis using local anaesthesia. Follow up was complete and averaged 6 months (2 to 14 months). Improved performance was as follows: type II, 93%, type III, 100%; type II/III, 86%. Complete cures were as follows: type II, 78%; type III, 75%; and type II/III, 57%. This experience suggests that with precise diagnosis and treatment involving minimal risk and cost the athlete has a reasonable chance of return to full activity.

Color-producing mechanism of morpho butterfly wings and biomimetics; Cho no hasshoku kiko to biomimetics

Energy Technology Data Exchange (ETDEWEB)

Tabata, H. [Nissan Motor Co. Ltd., Tokyo (Japan)

1999-07-01

Although the synthetic dyes and pigments originating in the 19th century are now at the height of their prosperity, there is an earnest hope for technology for realizing `supercolor.` If it is presumed that the features of such supercolor are to be found in outstanding clearness and high resistance to fading in the presence of ultraviolet rays, etc., the supercolor will be quite tough to deal with. When attention is steered toward the living world, however, there are cases of easily producing such by morphogenesis at the level of several tens of nanometers. In this paper, the development of a novel material is presented from the viewpoint of biomimetic engineering that the author et al. are engaged in. The coloring on the wings of a butterfly Morpho Sulkowskyi of South American origin is the product of interaction between light and the physical, microscopic structure of scales, and the coloring is extremely clear and remains free of fading except in case the microstructure is destroyed. This mechanism is applied for the development of a supercolor fiber. As the result, a structurally coloring fiber is created by stretching a molten composite string. In this effort, reformed polyester and polyamide different in refraction factor are used in place of substance layers and air layers on the butterfly wings. (NEDO)

Modelling the Meshing of Cycloidal Gears

Directory of Open Access Journals (Sweden)

Nachimowicz Jerzy

2016-06-01

Full Text Available Cycloidal drives belong to the group of planetary gear drives. The article presents the process of modelling a cycloidal gear. The full profile of the planetary gear is determined from the following parameters: ratio of the drive, eccentricity value, the equidistant (ring gear roller radius, epicycloid reduction ratio, roller placement diameter in the ring gear. Joong-Ho Shin’s and Soon-Man Kwon’s article (Shin and Know, 2006 was used to determine the profile outline of the cycloidal planetary gear lobes. The result was a scatter chart with smooth lines and markers, presenting the full outline of the cycloidal gear.

Ultrasound-Diagnosed Tibia Stress Fracture: A Case Report.

Science.gov (United States)

Amoako, Adae; Abid, Ayesha; Shadiack, Anthony; Monaco, Robert

2017-01-01

Stress fractures are a frequent cause of lower extremity pain in athletes, and especially in runners. Plain imaging has a low sensitivity. Magnetic resonance imaging (MRI) or bone scan scintigraphy is the criterion standard, but expensive. We present the case of a young female distance runner with left shin pain. Plain radiography was unremarkable. Ultrasound showed focal hyperechoic elevation of the periosteum with irregularity over the distal tibia and increased flow on Doppler. These findings were consistent with a distal tibia stress fracture and confirmed by MRI. Examination of our case will highlight the utility of considering an ultrasound for diagnosis of tibial stress fracture.

Ultrasound-Diagnosed Tibia Stress Fracture: A Case Report

Directory of Open Access Journals (Sweden)

Adae Amoako

2017-04-01

Full Text Available Stress fractures are a frequent cause of lower extremity pain in athletes, and especially in runners. Plain imaging has a low sensitivity. Magnetic resonance imaging (MRI or bone scan scintigraphy is the criterion standard, but expensive. We present the case of a young female distance runner with left shin pain. Plain radiography was unremarkable. Ultrasound showed focal hyperechoic elevation of the periosteum with irregularity over the distal tibia and increased flow on Doppler. These findings were consistent with a distal tibia stress fracture and confirmed by MRI. Examination of our case will highlight the utility of considering an ultrasound for diagnosis of tibial stress fracture.

A Personal Navigation System Based on Inertial and Magnetic Field Measurements

Science.gov (United States)

2010-09-01

worked selling pumpkin seeds and shinned shoes in the local park to help his parents and other siblings scrape together the most basic of necessities. I...2.6) where ba is written in the form of a “ pure quaternion” as 0, , ,b b bx y za a a   , and q  is the quaternion conjugate defined as...nm and bm are expressed in the form of pure quaternions, that is 0n n n nx y zm m m m     and 0b b b bx y zm m m m     . After

Fiscal 1997 project on the R and D of industrial scientific technology under consignment from NEDO. Report on the results of the R and D of technologies to invent original high-functional materials (technical development of structure control materials / R and D of multi-stimuli-responsive materials); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Dokusoteki kokino zairyo sosei gijutsu no kenkyu kaihatsu (kozo seigyo zairyo gijutsu kaihatsu) kodo shigeki oto zairyo no kenkyu kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The paper described multi-stimuli-responsive materials out of the technology developments for creating original high-functional materials under the system of R and D of industrial scientific technologies. These are materials which repeatedly reproduce functions such as separation, penetration and movement in response to stimuli by imitating living organisms. In relation to polymer multi-stimuli-responsive materials, various copolymers were synthesized using N-acetyl (meta) acrylamide, of which the synthesis method was established in the previous fiscal year, as a main component, and thermal responsive polymer with upper critical solution temperature which becomes a base of separation functional materials was searched for. By immobilizing it with molecular recognition ligand, measured was thermal dependence of affinity of the immobilized matter to albumin. Also studied were molecular recognition cell adhesion/separation functional materials. Concerning composite multi-stimuli-responsive materials, with the use of silica microcapsule surface-immobilized with silane coupling agent, studied were the optimum conditions for immobilizing thermo-responsive polymer to the surface of the capsule. Using motion functional materials by ion exchange resin, obtained was motion functionality which is satisfactory at the state of practical use. 94 refs., 82 figs., 16 tabs.

Tohoku Town developing with new energy. New energy vision of the Tohoku town area; 2001 nendo Tohoku machi chiiki shin energy vision. Shin energy de hiraku Tohoku machi

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-03-01

For the purpose of promoting the introduction of new energy and enhancing the awareness of it in Tohoku Town, Aomori Prefecture, an investigational study was conducted of the potential utilization of new energy, etc., and a vision was worked out. The population of Tohoku Town was 10,662 according to the results of the national census taken in 2000, which is slightly decreasing. The energy consumption amount of Tohoku Town was estimated at 280,977 Gcal/y, and the consumption of fossil fuel in the commercial/residential sector stands out. This is because a lot of kerosene is consumed in the area where it is cold. As measures to be taken for the new energy vision, the following were cited: initiative introduction of new energy to public facilities/preparation of a system toward the promotion of introduction, supply of thermal energy to townspeople/creation of the living environment using new energy, new energy use to activities of agricultural production/energy use of stockbreeding resource/energy use of forestry resource/potential study of the wind power generation, spread/education for townspeople/proprietors, preparation of places of bodily sensation/exchanges of new energy, training/support of activities of townspeople themselves, etc. (NEDO)

Relations between anthropometric and motor variables of seven-year-old girls with the differentiated level of nutritional status

Directory of Open Access Journals (Sweden)

Ivanović Miroljub

2017-01-01

Full Text Available The objective of this paper is to examine the frequency of nutritional status and the relations between anthropometric characteristics and motor skills of the first-grade elementary schools girls from Valjevo. A battery of 16 anthropometric measurements and 9 motor tests was conducted on the pertinent sample (N = 332 of seven-year-old girls. Data were analyzed using common measures of central tendency, measures of variability and canonical correlation analysis. Based on the measured body mass index, 75% of participants have normal body mass, 21% has increased body mass, and 4% is overweight. The results showed that in the group of participants with normal body mass there is no significant connection between two systems of variables (morphological characteristics and motor skills. Data from the group of overweight participants show that the two statistically relevant correlations were extracted in the morpho-motoric space and were interpreted as canonical functions: (1 circular dimensionality of the skeleton and body mass, and explosive strength and (2 subcutaneous fatty tissue and segmented run and running speed. Canonical factors indicate that the greater the size of chest, thigh, shin and body mass, the lower are the results of the composite motor tests (plyometric jump, forward lean-backward lean-throw, long jump and standing jump, that is the girls who had higher values of back skinfold, stomach skinfold, thigh skinfold and shin skinfold, had worse result realization of motor tasks (hand-tapping, foot-tapping and running 5 x 10 m. Empirical data of the research on the isolated canonical structure are relevant from the theoretical point of view, but they also have relevant implications for identifying increased level of nutritional status and the advancement of physical education in elementary school education.

Inhibition of oxygen scavengers realized by peritoneal macrophages: an adhesion prevention target?

Directory of Open Access Journals (Sweden)

Mynbaev OA

2014-11-01

Full Text Available Ospan A Mynbaev,1–4 Marina Yu Eliseeva,1,2 Oktay T Kadayifci,1,5 Tahar Benhidjeb,1,6 Michael Stark1,41The International Translational Medicine and Biomodeling Research team, MIPT center for human physiology studies, Laboratory of Cellular and Molecular Technologies, The Department of Applied Mathematics, Moscow Institute of Physics and Technology (State University, Moscow Region, Russia; 2The Department of Obstetrics, Gynecology and Reproductive Medicine, Peoples’ Friendship University of Russia, Moscow, Russia; 3Laboratory of Pilot Projects, Moscow State University of Medicine and Dentistry, Moscow, Russia; 4The New European Surgical Academy, Berlin, Germany; 5Onkim Stem Cell Technologies Inc., Istanbul, Turkey; 6Department of Surgery, Burjeel Hospital, Abu Dhabi, United Arab EmiratesOur team, general surgeons and gynecologists look constantly for ways to prevent postsurgical adhesions, and hence, we appreciate the platform you have established through multiple publications.1–3 This is especially because postsurgical adhesions may result in several complications such as the small bowel obstruction, secondary infertility, dyspareunia, chronic abdominal/pelvic pain and many others.Prevention of postsurgical adhesions is still an unsolved problem in spite of the suggested modifications of current surgical methods and application of various barriers, sprays, and use of other antiadhesive medications. We have already pointed out that a design of ideal nanoparticles should become a target of personalized adhesion prevention strategy in the future4,5 and therefore, we read with great interest the article by Shin et al that was recently published in your journal.6 This article explores the potential of postoperative adhesion prevention by nanofibers of poly(lactic-co-glycolic acid (PLGA loaded with epigallocatechin-3-O-gallate (EGCG, which is the most bioactive polyphenolic compound extracted from green tea.Read the original article by Shin and

Economic Analysis of Installing Fixed and Removable Insulation for Pipe Wall Thinning Management

Energy Technology Data Exchange (ETDEWEB)

Hwang, Kyeongmo; Yun, Hun [KEPCO E and C, Gimcheon (Korea, Republic of)

2016-12-15

To perform ultrasonic testing (UT) thickness measurement of the secondary side piping installed in nuclear power plants, the insulation for preventing heat loss should be removed. The type of insulation can be divided into fixed and removable insulation. Fixed and removable insulation have their own strengths and weaknesses. Removable insulation has been installed in the components susceptible to wall thinning caused by FAC and erosion from Shin-Kori unit 1, which commenced its commercial operation in 2011. In this paper, the number of repeated inspections of components and the number of replacements of fixed insulation were estimated and a more economical way was identified based on the manufacturing and installation costs for fixed and removable insulation.

A Numerical Procedure for Model Identifiability Analysis Applied to Enzyme Kinetics

DEFF Research Database (Denmark)

Daele, Timothy, Van; Van Hoey, Stijn; Gernaey, Krist

2015-01-01

The proper calibration of models describing enzyme kinetics can be quite challenging. In the literature, different procedures are available to calibrate these enzymatic models in an efficient way. However, in most cases the model structure is already decided on prior to the actual calibration...... and Pronzato (1997) and which can be easily set up for any type of model. In this paper the proposed approach is applied to the forward reaction rate of the enzyme kinetics proposed by Shin and Kim(1998). Structural identifiability analysis showed that no local structural model problems were occurring......) identifiability problems. By using the presented approach it is possible to detect potential identifiability problems and avoid pointless calibration (and experimental!) effort....

Evolution of solar magnetic fields - A new approach to MHD initial-boundary value problems by the method of nearcharacteristics

Science.gov (United States)

Nakagawa, Y.

1980-01-01

A method of analysis for the MHD initial-boundary problem is presented in which the model's formulation is based on the method of nearcharacteristics developed by Werner (1968) and modified by Shin and Kot (1978). With this method, the physical causality relationship can be traced from the perturbation to the response as in the method of characteristics, while achieving the advantage of a considerable reduction in mathematical procedures. The method offers the advantage of examining not only the evolution of nonforce free fields, but also the changes of physical conditions in the atmosphere accompanying the evolution of magnetic fields. The physical validity of the method is demonstrated with examples, and their significance in interpreting observations is discussed.

The Significance of “mushin”: The Essential Mind of Zen Buddhist Philosophy for Humans in a Contemporary World

Directory of Open Access Journals (Sweden)

Hisaki HASHI

2016-02-01

Full Text Available In our time of an information highway, digital networks are linked around the clock. Among various data many people are unconsciously depending on IT and digital medias with their body––but without any mind. The human origin, its creative thinking and acting, transmitting one idea to another for reforming and developing something new has been quite forgotten. Against this omnipresent phenomenon the Zen Buddhist Philosophy of Mind shows a dynamic approach to re-create and re-construct a human life, accompanied by the unique concept of the absolute one, “mu” (無, mu-shin (無心, the mind of mu presents a dynamic unity in its flexible activity.

The 100th anniversary of Yukawa and Tomonaga's birth

International Nuclear Information System (INIS)

Sato, Fumitaka; Ukawa, Akira; Takasugi, Eiichi; Kuroda, Yoichiro; Kamefuchi, Susumu; Tanaka, Sho; Kinoshita, Toichiro

2006-01-01

The above feature articles contain seven papers such as 1) contribution of leading figures to innovate physics by Humitaka Sato, 2) half century of quantum field theory and renormalization theory by Akira Ukawa, 3) inheritance from Dr. Yukawa by Eiichi Takasugi, 4) Dr. Tomonaga and 'Science and Technology Square' by Yoichiro Kuroda, 5) a trial to Shin-ichiro Tomonaga theory by Susumu Kamefuchi, 6) Dr. Yukawa and Einstein living the century of war and science by Sho Tanaka, and 7) precision calculation of QED and Tomonaga theory by Toichiro Kinoshita. Extracts from Tomonaga's 'Future of the theory of elementary particles', Yukawa's 'Cost of science researches' and 'An age of theoretical physics' are reported. (S.Y.)

Sorption mechanism of solvent vapors to coals; Sekitan eno yobai joki no shuchaku kiko no kaiseki

Energy Technology Data Exchange (ETDEWEB)

Shimizu, K.; Takanohashi, T.; Iino, M. [Tohoku University, Sendai (Japan). Institute for Chemical Reaction Science

1996-10-28

With an objective to clarify the interactions between micropore structure of coal and solvent reagents, a sorption experiment was carried out under solvent saturated vapor pressure. Low-volatile bituminous coal, Pocahontas No. 3 coal, has the aromatic ring structure developed, and makes solvent more difficult to diffuse into coal, hence sorption amount is small. Methanol has permeated since its polarity is high. High-volatile bituminous coal, Illinois No. 6 coal, makes solvent penetrate easily, and the sorption amount was large with both of aromatic and polar solvents. Since brown coal, Beulah Zap coal, contains a large amount of oxygen, and hydrogen bonding is predominant, sorption amount of cyclohexane and benzene having no polarity is small. Methanol diffuses while releasing hydrogen bond due to its polarity, and its sorption amount is large. A double sorption model is available, which expresses the whole sorption amount as a sum of physical sorption amount and amount of permeation into coal. This model was applied when it explained successfully the sorption behavior of the solvents relative to coals, excepting some of the systems. However, also observed were such abnormal behavior as sorption impediment due to interactions between coal surface and solvents, and permeation impediment due to hydroxyl groups inside the coals. 1 ref., 10 figs., 2 tabs.

FY 1997 new energy data book; 1997 nendo shin energy data shu

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-07-01

In relation to the new energy the use of which is promoted by New Energy and Industrial Technology Development Organization (NEDO), this book arranged the information on the technical trend and legal system. It includes the following items: (I) New energy general (classification of new energy, forecast of energy supply/demand, cost and outlook for the introduction of new energy technology (new power generation), menu of buying the surplus electric power from electric power company, main subsidy systems for spread/promotion of new energy in Japan, policy/law/subsidy system related to introduction of new energy overseas, list of organizations for new energy technology development). The items of individual explanation of new energy are as follows: situations of the introduction in each country, situation of the introduction in Japan, policy in each country, subsidy system, present market situation, economical efficiency, etc. The following new energies were studied: (II) Photovoltaic power generation. (III) Solar energy utilization. (IV) Wind power generation. (V) Fuel cell. (VI) Waste power generation. (VII) Cogeneration. (VIII) Unused energy. (IX) geothermal power generation. (X) Clean energy automobile. (XI) Coal liquefaction/gasification. (XII) List of the outline of policies concerning new energy, energy conservation and reduction of environmental loads. (NEDO)

New energy vision in Kitakata City area; Kitakatashi chiiki shin energy vision

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-02-01

A new energy vision was established in Kitakata City in Fukushima Prefecture. The population of Kitakata City in 2000 was 37,490, not having experienced extreme increase or decrease. Population employed in the tertiary industry occupies the largest ratio at 36.9%, followed by the secondary industry. The energy demand of the entire city is about 3300 trillion Joule, and carbon dioxide emitted therefrom is estimated about 77,000 t-C annually. Calculation of new energy amount in existence reveals about 4190 trillion Joule annually, which corresponds to about 1.3 times the energy demand quantity of the city. The new energy introducing project includes introduction of photovoltaic power generation into the public hall and schools, utilization of solar heat for greenhouses, introduction of solar heat and wind power hybrid power generation into the Green Tourism experiencing facilities, parks, street lights, and evacuation places, introduction of small to medium hydropower generation plants into Kitanogo, Kuranoyu and Happo-Ike, utilization of cold heat of snow, introduction of clean energy fueled automobiles into the public organizations, utilization of bio-mass energy, wastes burning power generation and heat utilization. (NEDO)

Regional new energy vision for Sakurae town; Sakuraecho chiiki shin energy vision

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-02-01

The town is situated in a mountainous region typical of the Iwami district, Shimane Prefecture, rich in natural energy resources with as many as four hydroelectric power stations in service. Such local features were taken into account fully when a regional new energy vision was formulated for showing the town the course to follow for promoting the introduction of new energy which is environmentally friendly. The results of related efforts are described in eight chapters, which are (1) the outline of the vision, (2) survey of the trend of new energy, (3) description of Sakurae town, (4) townspeople's awareness of energy matters, (5) rate of energy consumption, (6) available amount of new energy, (7) basic policy for introducing new energy, and (8) projects for introducing new energy. Part (8) covers a photovoltaic project, wind power project, ligneous biomass energy introduction project, and the introduction of clean energy vehicles. Under the ligneous biomass energy introduction project, business profitability is discussed of a scrap wood fueled power plant. (NEDO)

New energy vision in Daito Town area; Daitocho chiiki shin energy vision

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-02-01

A new energy vision was established in the Daito Township area in Iwate Prefecture. The energy consumed by Daito town as a whole in fiscal 1998 is about 213,685 two-hundred-kL drums, accounted for by the consumer department at 35.7%, the transportation department at 33.3%, and the industrial department at 31.0%. Carbon dioxide emission amount is estimated to be 109,647 t-CO2. General households in the town consume fossil fuel largely for room heating, whose energy conservation or substitution by new energies is important. The utilizable quantity of new energies in the town include solar energy, forest bio-mass, agricultural resource bio-mass, livestock excreta bio-mass, and refuses, whose total quantity is estimated to be 23,161 drums. The new energy utilization project includes enlightenment activities by introducing a photovoltaic power generator and a small wind power generator into Daito Middle School and the Murone Plateau Natural Energy Park, introduction of solar heat generated hot water supply devices for public facilities and town-operated houses, a discussion on a pellet production line in the wood processing industrial complex, and introduction of pellet boilers into public facilities. (NEDO)

FY 1998 new energy data book; 1998 nendo shin energy data shu

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-07-01

In relation to the new energy the use of which is promoted by New Energy and Industrial Technology Development Organization (NEDO), this book arranged the information on the technical trend and legal system. It includes the following items: (I) New energy general (classification of new energy, forecast of energy supply/demand, cost and outlook for the introduction of new energy technology (new power generation), menu of buying the surplus electric power from electric power company, main subsidy systems for spread/promotion of new energy in Japan, policy/law/subsidy system related to introduction of new energy overseas, list of organizations for new energy technology development). The items of individual explanation of new energy are as follows: situations of the introduction in each country, situation of the introduction in Japan, policy in each country, subsidy system, present market situation (photovoltaic power generation), list of names/telephone Nos. of the related companies, and economical efficiency (solar heat utilization). The following new energies were studied: (II) Photovoltaic power generation. (III) Solar energy utilization. (IV) Wind power generation. (V) Fuel cell. (VI) Waste power generation. (VII) Cogeneration. (VIII) Unused energy. (IX) geothermal power generation. (X) Clean energy automobile. (XI) Coal liquefaction/gasification. (NEDO)

Regional new energy vision for Fukuoka city; Fukuokashi chiiki shin energy vision

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-02-01

A regional new energy vision has been formulated for Fukuoka city, Fukuoka Prefecture, which will serve as a basic guide to the promotion of new energy introduction which is one of the measures for coping with environmental problems. The vision is described in five chapters of (1) the local characteristics of Fukuoka city, (2) energy situation in Fukuoka city, (3) basic program, (4) high priority plans, and (5) efforts to enhance the vision toward realization. Discussed as high priority plans are the introduction of new energy into public buildings above all others, high efficiency utilization of refuse-derived energy, utilization of new energy at water supply and drainage facilities, utilization of water temperature difference energy, introduction of clean energy vehicles, promotion of a new energy industry, and the extension of assistance for encouraging citizens and industrialists to adopt new energy. In extending assistance for encouraging the introduction of new energy, studies are made about measures for introducing new energy into individual residences and about a citizenry-involving new energy adopting industry (offering a site to the power generation industry) under the basal conditions that information be supplied sufficiently and that the citizenry and administration cooperate with each other in driving forward the vision. (NEDO)

New energy introduction vision in Chiba Prefecture; Chibaken shin energy donyu vision

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Surveys and discussions were given on establishing a new energy introduction vision in Chiba Prefecture. The basic conception for new energy introduction regarded important the handling of global environment problems, improvement of the global environment, enhancement in energy security, and assurance of the regional performance of disaster prevention. New energy introduction is thought making it possible to create attractive urban spaces, make living environment more agreeable, and promote and breed new industries including the eco-business. Important measures may include the followings: introduction of new and economic energies in multiple ways for individual buildings and facilities, development of environment symbiotic cities utilizing new energies, improvement of region symbiotic cities in industrial zones, effective utilization of energies from wide-area refuses and wastes, establishment of an urban type cleaning plant that utilizes effectively energies from general wastes, new energy utilization in coordination with agricultural activities, utilization of new energies in fishery industry areas, and expansion in use of clean energy fueled automobiles including natural gas fueled automobiles. (NEDO)

Acute periostitis in early acquired syphilis simulating shin splints in a jogger.

Science.gov (United States)

Meier, J L; Mollet, E

1986-01-01

Acute periostitis affecting the long bones is a characteristic but uncommon manifestation of syphilis in the adult with an early acquired infection. This report describes the history of a jogger who developed acute localized periostitis of the shaft of both tibiae during the early stage of acquired syphilis. Symptomatology was initially attributed to the medial tibial stress syndrome.

New energy vision in Tochigi Prefectural area; Tochigiken chiiki shin energy vision

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

With an objective to structure a circulation type society that imposes less load on the environment, a new energy vision was established in the Tochigi Prefectural area. This plan is an overall plan to promote introduction of new energies, and at the same time serves as a guideline when prefectural residents, business entities and the administration attempt to introduce new energies. The plan was prepared upon viewing the year 2010. The new energy introduction quantity in 2010 was estimated to be 470,000 kL as converted into crude oil (4.7% of the consumption in fiscal 1997). The plan document covers the following five fields: 1) the basic conception of the vision establishment, 2) the current status and problems surrounding the energies, 3) the basic directionality in introducing new energies, 4) policy systems and role sharing toward introducing new energies, and 5) case studies and case presentation. Item 4 is composed of policy systems for new energy introduction, projects to be implemented with emphasis, roles of working organizations, and institutions for promotion. The projects to be executed with emphasis consist of five items including initiative introduction into facilities utilized by the prefectural residents. (NEDO)

Regional new energy vision for Yakumo village; Yakumomura chiiki shin energy vision

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-02-01

A regional new energy vision has been formulated for Yakumo village, Shimane Prefecture, which abides with the village doctrines of introducing new energy for quality life and building a community advanced in terms of environmental protection. Yakumo village, which has a population of approximately 6,800 engaged mainly in agriculture or forestry, consumed 5 times 10{sup 5} GJ in energy in fiscal 1998. The results of activities conducted in this connection are summarized in nine chapters which are (1) the trends of affairs surrounding new energy, (2) Yakumo village's local characteristics as seen from the new energy viewpoint, (3) collection of information on new energy measures taken by local governments, (4) estimation of demand for energy in Yakumo village, (5) estimation of the existing amount and available amount of new energy in Yakumo village, (6) study of the basic concept and basic policy of the vision, (7) study of new energy introduction, (8) approach to the issue by thinking, and (9) reference materials. In concrete terms, discussion is held about introduction into public facilities of photovoltaic power generation and water heaters, wind power generation, cogeneration, and waste heat utilization. For the sake of gardening at public facilities, for instance, the introduction of photovoltaic power generation is taken up. (NEDO)

Regional new energy vision for Aogaki town; Aogakicho chiiki shin energy vision

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-02-01

A regional new energy vision has been formulated as part of Phase 4 of the Town Development Program of Aogaki town, Hyogo Prefecture, calling for 'building a town, comfortable to live in and full of hope, by utilizing rich natural environments.' The results of activities conducted in this connection are summarized in five chapters, which are (1) the description of the new energy vision, (2) Aogaki-town's energy characteristics, (3) basic plan, (4) driving forward of prioritized plans, and (5) toward the driving forward of the new energy vision. Chapter (4) comprises the goal of the formulation of the prioritized plans, the definition of the prioritized plans, and the establishment of individual projects. Established as the individual projects are the introduction of new energy linked to the inhibition of carbon dioxide gas emissions, use of wind energy for multiple purposes, public facilities preceding others in the introduction of new energy, building of environmentally symbiotic residences utilizing new energy, utilization of new energy at recreation facilities, and the popularization of and enlightening about new energy and its introduction through the participation of the local population. (NEDO)

Efficacy of copper oxide wire particles against gastrointestinal nematodes in sheep and goats.

Science.gov (United States)

Soli, F; Terrill, T H; Shaik, S A; Getz, W R; Miller, J E; Vanguru, M; Burke, J M

2010-02-26

Profitable sheep and goat production in the USA is severely limited by gastrointestinal nematode (GIN) parasitism, particularly by Haemonchus contortus. Copper oxide wire particles (COWP) have anti-parasitic properties in the diet of small ruminants, but efficacy of COWP may differ between sheep and goats. In a study with weaned kids (Kiko x Spanish cross, 6 months old) and lambs (Katahdin or Dorper x Blackface crosses, 5 months old), grazing the same pasture area in Central Georgia, 2g of COWP in a gel capsule was given to half the animals of each species, while the other half were given no COWP. Fecal and blood samples were taken weekly to determine GIN fecal egg counts (FEC) and blood packed cell volume (PCV). After COWP treatment, animals were grazed for 4 weeks and then slaughtered, with adult GIN recovered from the abomasum and small intestines for counting and identification to species. For both sheep and goats, COWP treatment reduced EPG (P<0.05), increased PCV (P<0.05), and lowered abomasal GIN numbers (P<0.05). For EPG, these differences were 82.5 and 90.5% for sheep and goats, respectively, 26 days after treatment, while adult H. contortus were 67.2 and 85.8% lower for COWP-treated sheep and goats, respectively. In this study, COWP treatment was equally effective against H. contortus infection in lambs and kids and appears to be an effective method of controlling H. contortus infection for up to 6 weeks in small ruminants following weaning.

Industrial and scientific technology research and development project fiscal 1997 commissioned by the New Energy and Industrial Technology Development Organization. Report on research and development of a brain type computer architecture `trial fabrication and high-level evaluation on chips for a large-scale artificial neural system` and on results of evaluation studies on the chips; 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Nogata computer architecture no kenkyu kaihatsu `daikibo jinko shinkei kairo system yo chip no shisaku to kodo hyoka` chip hyoka kenkyu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

In order to develop a brain type computer architecture, a brain mimic processor (BMP) has been developed (which was made in LSI in fiscal 1997), and studies are being made on developing its applications. Development has been made on an element in which linkage of one million cells with one thousand neural cells can be realized. Evaluation substrates mounted with the BMP, control software, and compilers were provided to 15 organizations including the National Research Institutes, universities, corporations, and other societies (for 19 themes) to evaluate capability of the LSI and its application development. All of the research organizations are using these items utilizing features of the LSI or the network for such purposes as learning, storage, recognition and control. The applicable theme may include infrared spectrum pattern recognition and domain division of document images using neural network functions. It can also include structural analysis of mass spectrum molecules, time series pattern recognition, location of corresponding points in images, estimation of moving images, satellite control, character recognition, short time storage, long-term association memory models, and invention process studies, all utilizing the functions of the BMP. 71 refs., 89 figs., 9 tabs.

A revival of the autoregressive distributed lag model in estimating energy demand relationships

Energy Technology Data Exchange (ETDEWEB)

Bentzen, J.; Engsted, T.

1999-07-01

The findings in the recent energy economics literature that energy economic variables are non-stationary, have led to an implicit or explicit dismissal of the standard autoregressive distribution lag (ARDL) model in estimating energy demand relationships. However, Pesaran and Shin (1997) show that the ARDL model remains valid when the underlying variables are non-stationary, provided the variables are co-integrated. In this paper we use the ARDL approach to estimate a demand relationship for Danish residential energy consumption, and the ARDL estimates are compared to the estimates obtained using co-integration techniques and error-correction models (ECM's). It turns out that both quantitatively and qualitatively, the ARDL approach and the co-integration/ECM approach give very similar results. (au)

Long-Term Behaviors of the OPC Concrete with Fly-ash and Type V Concrete Applied on Reactor Containment Building

International Nuclear Information System (INIS)

Yoon, Eui Sik; Lee, Hee Taik; Paek, Yong Lak; Park, Young Soo

2010-01-01

The prestressed concrete has been used extensively in the construction of Reactor Containment Buildings (RCBs) in Korea in order to strengthen the RCBs and at the same time, prevent the release of radiation due to the Design Basis Accident and Design Basis Earthquake. It is well known that the prestressed concrete loses its prestressing force over the age, and the shrinkage and creep of the concrete significantly contributes to these long term prestressing losses. In this study, an evaluations of long term behaviors of the concrete such as creep and shrinkage have been performed for two types of concretes : Ordinary Portland Cement containing fly-ash used for the Shin- Kori 1 and 2 NPP and Type V cement used for the Ul- Chin 5 and 6 NPP

Long-Term Behaviors of the OPC Concrete with Fly-ash and Type V Concrete Applied on Reactor Containment Building

Energy Technology Data Exchange (ETDEWEB)

Yoon, Eui Sik; Lee, Hee Taik; Paek, Yong Lak [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of); Park, Young Soo [Korea Hydro and Nuclear Power Co., Busan (Korea, Republic of)

2010-10-15

The prestressed concrete has been used extensively in the construction of Reactor Containment Buildings (RCBs) in Korea in order to strengthen the RCBs and at the same time, prevent the release of radiation due to the Design Basis Accident and Design Basis Earthquake. It is well known that the prestressed concrete loses its prestressing force over the age, and the shrinkage and creep of the concrete significantly contributes to these long term prestressing losses. In this study, an evaluations of long term behaviors of the concrete such as creep and shrinkage have been performed for two types of concretes : Ordinary Portland Cement containing fly-ash used for the Shin- Kori 1 and 2 NPP and Type V cement used for the Ul- Chin 5 and 6 NPP

Biomechanical analysis technique choreographic movements (for example, "grand battman jete"

Directory of Open Access Journals (Sweden)

Batieieva N.P.

2015-04-01

Full Text Available Purpose : biomechanical analysis of the execution of choreographic movement "grand battman jete". Material : the study involved students (n = 7 of the department of classical choreography faculty of choreography. Results : biomechanical analysis of choreographic movement "grand battman jete" (classic exercise, obtained kinematic characteristics (path, velocity, acceleration, force of the center of mass (CM bio parts of the body artist (foot, shin, thigh. Built bio kinematic model (phase. The energy characteristics - mechanical work and kinetic energy units legs when performing choreographic movement "grand battman jete". Conclusions : It was found that the ability of an athlete and coach-choreographer analyze the biomechanics of movement has a positive effect on the improvement of choreographic training of qualified athletes in gymnastics (sport, art, figure skating and dance sports.

Beneficial Effect of Paljeong-san Pharmacopuncture Treatment Combined with Peritoneal Injection on Glycerol-Induced Acute Renal Failure in Rabbits

Directory of Open Access Journals (Sweden)

Chi-Yeon Lim

2010-09-01

Full Text Available Purpose: The present study was carried out to determine if Paljeong-san extract (PJS treatment exerts beneficial effect against the glycerol-induced acute renal failure in rabbits. Material and Method: PJS was selected in the basis of invigorating kidney which can eliminate pathogens. Rabbits were treated with PJS pharmacopuncture on Shin-shu (BL23 point for 5 days right after the injection of 50% concentration of glycerol (5㎖/㎏ body weight. Results and Conclusions: Glycerol injection caused an increase in serum creatinine and BUN level and urine glucose secretion, which were accompanied by a reduction in GFR. PJS Pharmacopuncture treatment combined with peritoneal injection showed beneficial effect on glycerol-induced acute renal failure by inhibition of serum creatinine increase and GFR decrease.

A revival of the autoregressive distributed lag model in estimating energy demand relationships

Energy Technology Data Exchange (ETDEWEB)

Bentzen, J; Engsted, T

1999-07-01

The findings in the recent energy economics literature that energy economic variables are non-stationary, have led to an implicit or explicit dismissal of the standard autoregressive distribution lag (ARDL) model in estimating energy demand relationships. However, Pesaran and Shin (1997) show that the ARDL model remains valid when the underlying variables are non-stationary, provided the variables are co-integrated. In this paper we use the ARDL approach to estimate a demand relationship for Danish residential energy consumption, and the ARDL estimates are compared to the estimates obtained using co-integration techniques and error-correction models (ECM's). It turns out that both quantitatively and qualitatively, the ARDL approach and the co-integration/ECM approach give very similar results. (au)

Phlebographic variants of valvular insufficiency of deep veins in varicose disease of the lower limbs

International Nuclear Information System (INIS)

Firsov, E.F.; Gladkikh, V.G.; Lazarenko, V.A.; Shevelev, E.L.; Pashin, S.V.

1995-01-01

Analysis of clinical data and results of retrograde femoral and popliteal phlebographics in 108 patients with varicose disease of the lower limbs permitted the authors to propose a three-stage classification of valvular insufficiency of the deep veins and to demonstrate that the disease compensation stages are related to the presence and degree of retrograde blood flow. Analysis of retrograde phlebograms helped single out 8 variants of retrograde blood flow in the deep femoral veins and 12 variants in the deep veins of the shin with valvular insufficiency thereof, which is practically important for interpretation of x-ray findings and for the choice of the optimal method and volume of surgical correction of this vascular abnormality. 4 refs.; 5 figs

Effect of Financial Innovations on Demand for Money in Pakistan: An ARDL approach

Directory of Open Access Journals (Sweden)

Qais Aslam

2010-12-01

Full Text Available An increasing array of development of banking system of Pakistan, through the use of information technology and modernization of products and services has led to financial innovations to be considered as important determinant of demand for money. This paper investigates the relationship of financial innovations and demand for money in Pakistan using Pesaran and Shin (1995 ARDL approach for long run and ECM for short run determination using yearly observations from 1957 to 2008. Using the ARDL coefficient estimation approach financial innovations demonstrates positive relationship, not found to significant but highly elastic and does not have deterministic trend for long run estimation whereas positively significant and deterministic trend for money demand function in short run in case of Pakistan.

IDIOPATHIC ERYTHEMA NODOSUM AND PREGNANCY: DESCRIPTION OF A CASE

Directory of Open Access Journals (Sweden)

B S Belov

2009-01-01

Full Text Available Erythema nodosum (EN is a dermatosis of unclear etiology, which is characterized by vascular lesion of the skin; it shows itself as hard painful nodes occurring in the derma or subcutaneous fat on the shins and thighs. EN has been described in many chronic infectious processes with some features of its clinical course. In most cases, the disease is regarded as a nonspecific immunoinflammatory response to a wide spectrum of etiological factors, including that in gestation, which presents certain problems in curing the patient. The example given below supports the need for timely testing for infectious markers in pregnancy and, in case of evolving EN, for using not only nonsteroidal anti-inflammatory drugs, but also pathogenetic treatment.

Scintigraphic appearance of stress-induced trauma of the dorsal cortex of the third metacarpal bone in racing Thoroughbred horses: 121 cases (1978-1986)

International Nuclear Information System (INIS)

Koblik, P.D.; Hornof, W.J.; Seeherman, H.J.

1988-01-01

Review of 121 bone scintigrams obtained on racing Thoroughbred horses with clinical histories indicative of forelimb lameness revealed 3 scintigraphic patterns of stress-induced trauma to the dorsal cortex of the third metacarpal bone: (1) focal, intense uptake associated with recent stress fracture; (2) regional uptake of varying intensity or a mixed pattern of uptake associated with chronic stress fracture; and (3) diffuse, mild to moderate uptake associated with periostitis (bucked shins). The latter scintigraphic pattern appeared to be an exaggerated manifestation of the normal remodeling process evident in immature horses (2 to 3 years old). Scintigraphy was most helpful in identifying radiographically occult stress fractures, determining the extent of cortical involvement before surgical intervention in cases of chronic stress fractures, and monitoring the fracture healing process

News from Online: A Spectrum of Color

Science.gov (United States)

Sweeney Judd, Carolyn

1999-06-01

an experiment that is suitable for older students, Circles of Light--The Mathematics of Rainbows at http://www.geom.umn.edu/education/calc-init/rainbow/. Frederick J. Wicklin and Paul Edelman of the University of Minnesota note that this comprehensive lab is based on a module developed by Steven Janke. Go back to About Rainbows to link to a Java applet, allowing you to change the incident angle and color of light striking a water droplet. This great teaching device is from Fu-Kwun Hwang of the National Taiwan Normal University at http://science.kongju.ac.kr/phys/shin/experiment/ntnujava /Rainbow/rainbow.html. And while you are here in this site (choose English or Chinese), look at the more than 30 Java applets created by F.-K. Hwang at http://science.kongju.ac.kr/phys/shin/experiment/ntnujava/index.html. The interactive applet on Shadow/Image and Color is great fun, (http://science.kongju.ac.kr/phys/shin/experiment/ntnujava/shadow /shadow.html). From mixing colors, we can go to Thomas Chasteen's fine work at http://www.shsu.edu/~chm_tgc/sounds/sound.html for an animation (and movie also) of how to separate colors using a tuneable monochromator ( http://www.shsu.edu/~chemistry/monochromator/mono.gif). This colorful graphic, showing incoming parallel white light, is clipped from that monochromator animation. While you are here at this site at Sam Houston State University, look at the other great animations and movies, including a movie showing solution-phase chemiluminescence at http://www.shsu.edu/~chm_tgc/chemilumdir/movie.html. So now that we have explored the breaking down of light into its component colors, we need to also look at another process--polarizing light. Let's go to Science Media's comprehensive site ( http://www.scimedia.com/index.html#scimedia) to examine polarized light ( http://www.scimedia.com/chem-ed/spec/molec/polarim.htm). Of course, most sunglasses polarize light--bringing us back to the question of the rainbow again. Explore here for a while

New energy introduction guidebook for Chugoku area; Shin energy donyu guidebook. Chugoku chiiki

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-05

A guidebook was edited for the purpose of assisting introduction of new energies. Sections consist of Section 1, new energies available in the Chugoku area; Section 2, procedure for new energy introduction; Section 3, assistance institutions by energy; and Section 4, the status of new energy introduction in the Chugoku area, the future introduction targets, and referential materials. Section 1, upon defining the new energies, summarized features of photovoltaic power generation, solar heat utilization, wind power generation, wastes power generation, cogeneration, fuel cells, clean energy fueled automobiles, and introduction records up to the year 2000. Section 2 summarizes the general roles of local governments in the introduction, processing procedures for individual programs, related regulations, and summary of the assistance institutions. Section 3 puts into order the assistance institutions by energy. Section 4 summarizes precautions, targets and records in introduction by each new energy. The referential materials include a list of the Japanese assistance institutions, and subsidy institutions related to new energies for local governments in the Chugoku area. (NEDO)

Feeding ecology of sharp-shinned hawks in deciduous and coniferous forests in Colorado

Science.gov (United States)

Suzanne M. Joy; Richard T. Reynolds; Richard L. Knight; Richard W. Hoffman

1994-01-01

Feeding ecology of 11 Sharp-skinned Hawk (Accipiter striates) pairs nesting in aspen (Populus tremuloides), conifer (Abies, Picea spp.), and mixed aspen-conifer habitats in southwest Colorado was investigated during 1988-1989. Small birds (x-bar = 20.9 g, SE = 0.8 g) and mammals (x-bar = 41.1 g, SE = 3.3 g) comprised 91 and 9% of...

Topographic Map of Quadrangle 3362, Shin-Dand (415) and Tulak (416) Quadrangles, Afghanistan

Science.gov (United States)

Bohannon, Robert G.

2006-01-01

This map was produced from several larger digital datasets. Topography was derived from Shuttle Radar Topography Mission (SRTM) 85-meter digital data. Gaps in the original dataset were filled with data digitized from contours on 1:200,000-scale Soviet General Staff Sheets (1978-1997). Contours were generated by cubic convolution averaged over four pixels using TNTmips surface-modeling capabilities. Minor artifacts resulting from the auto-contouring technique are present. Streams were auto-generated from the SRTM data in TNTmips as flow paths. Flow paths were limited in number by their Horton value on a quadrangle-by-quadrangle basis. Peak elevations were averaged over an area measuring 85 m by 85 m (represented by one pixel), and they are slightly lower than the highest corresponding point on the ground. Cultural data were extracted from files downloaded from the Afghanistan Information Management Service (AIMS) Web site (http://www.aims.org.af). The AIMS files were originally derived from maps produced by the Afghanistan Geodesy and Cartography Head Office (AGCHO). Because cultural features were not derived from the SRTM base, they do not match it precisely. Province boundaries are not exactly located. This map is part of a series that includes a geologic map, a topographic map, a Landsat natural-color-image map, and a Landsat false-color-image map for the USGS/AGS (Afghan Geological Survey) quadrangles covering Afghanistan. The maps for any given quadrangle have the same open-file number but a different letter suffix, namely, -A, -B, -C, and -D for the geologic, topographic, Landsat natural-color, and Landsat false-color maps, respectively. The open-file report (OFR) numbers for each quadrangle range in sequence from 1092 - 1123. The present map series is to be followed by a second series, in which the geology is reinterpreted on the basis of analysis of remote-sensing data, limited fieldwork, and library research. The second series is to be produced by the USGS in cooperation with the AGS and AGCHO.

New energy vision of Kanazawa City; 2001 nendo Kanazawa shi shin energy vision

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-02-01

For the purpose of promoting the introduction of new energy and enhancing the awareness of it in Kanazawa City, Ishikawa Prefecture, an investigational study was conducted of the energy demand amount of the city, existence amount of new energy and project for new energy introduction, and a vision was worked out. The energy demand amount of the city was approximately 42 million GJ. The amount of CO2 emitted from this was estimated at approximately 880,000 t-C. The rate of energy source was 65.3% of petroleum-base energy, 24.7% of electric power and 10.0% of gas. As viewed by sector, the energy demand amount consisted of 38.1% in the commercial/residential sector, 32.2% in the transportation sector and 29.7% in the industrial sector. As the project for new energy introduction, the following were studied: introduction of wind power generation to the sport recreation zone of the mountain area; introduction of natural gas cogeneration to the city hospital; introduction of hydroelectric power generation using the idle head of filtration plant; utilization of the sewage heat and sewage digestion gas at the water quality control center, introduction of clean energy vehicle to official vehicle; introduction of photovoltaic power generation to park light/school, etc. (NEDO)

[Preventive measures against plague and the control of Chinese coolies in colonial Korea].

Science.gov (United States)

Kim, Youngsoo

2014-12-01

This paper aims to examine the preventive measures taken against the plague in colonial Korea, particularly as applied to the control of Chinese coolies in 1911, soon after the annexation. The Government General of Korea began preventive measures with a train quarantine in Shin'uiju and Incheon in response to the spread of the plague to the Southern Manchuria. Shin' uiju had become urbanized due the development of the transportation network, and the seaport of Incheon was the major hub for traffic with China. Examining the transportation routes for the entry and exit of Chinese to and from Korea makes clear the reason why the Korea Government General initiated preventive measures in mid-January, 1911. The Government General of Korea tried to block the entry of Chinese through the land border crossing with China and through ports of entry, primarily Incheon. During the implementation of the preventive measures, quarantine facilities were built, including a quarantine station and isolation facility in Incheon. It was also needed to investigate the population and residential locations of Chinese in Korea to prevent the spread of plague. A certificate of residence was issued to all Chinese in Korea, which they needed to carry when they travelled. The preventive measures against plague which broke out in Manchuria were removed gradually. However, there was no specific measures against Chinese coolies, those who had migrated from China to work in the spring in Korea. Still the Government General of Korea had doubt about an infection of the respiratory system. As a result, the labor market in colonial Korea underwent changes in this period. The Government General recruited Korean laborers, instead of Chinese coolies whose employment had been planned. This move explains the Government General's strong preventive measures against plague and uncertainty in the route of plague infection, which influenced subsequent regulations on the prohibition of Chinese coolies working on

Foreign Animation Films and the Rising of Anti-Multiculturalism among Parents

Directory of Open Access Journals (Sweden)

Leslie Retno Angeningsih

2014-12-01

Full Text Available As the impact of globalization, foreign animation films such as Shin Chan from Japan, Krishna from India, Upin-Ipin from Malaysia, Batman and many others from the US are very popular in Indonesia. Those films supposed represent cultures of each nation, so that people can learn multiculturalism. However, those films create inversely. This study aims to know how foreign animation films affect on the rising of anti-multiculturalism among Indonesian parents. Survey is conducted on parents with kindergarten or elementary children in Yogyakarta. The results show that children prefer to watch foreign animation films compare to domestic one. They are more likely to imitate their favorite animation stars by behaving violently, speaking harshly, and disrespectfully to parents.  As a result parents tend to blame their children changing behavior on foreign cultures as bad and impolite compare to their own culture. Instead of encouraging better understanding on multiculturalism, foreign animation films has raised anti-multiculturalism among parents.Sebagai dampak globalisasi, film animasi asing seperti Shin Chan dari Jepang, Krishna dari India, Upin Ipin - dari Malaysia, Batman dan banyak lainnya dari Amerika Serikat sangat populer di Indonesia. Film-film seharusnya mewakili budaya masing-masing negara, sehingga orang dapat belajar multikulturalisme. Namun, film-film ini dapat pula berakibat sebaliknya. Penelitian ini bertujuan untuk mengetahui bagaimana film animasi dari luar bisa berpengaruh pada peningkatan anti-multikulturalisme pada orang tua di Indonesia. Survey dilakukan pada orang tua yang memiliki anak TK atau SD  di Yogyakarta. Hasil menunjukkan bahwa anak-anak lebih memilih untuk menonton film animasi asing dibandingkan dengan film dalam negeri. Mereka lebih cenderung untuk meniru bintang animasi favorit mereka dengan berperilaku keras, berbicara kasar, dan tidak hormat kepada orang tua. Akibatnya, orang tua cenderung menyalahkan anak

The Need to introduce CFD Methodology in Analyze Hydrogen Distribution for Postulated Severe Accidents

Energy Technology Data Exchange (ETDEWEB)

Na, Hanbee; Park, Sukyung; Kim, Kyuntae [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of); Lee, Jongkwang [Hanbat National University, Daejeon (Korea, Republic of); Kwon, Sejin [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

2015-10-15

The regulatory requirements for combustible gas control systems in Korea is that mean hydrogen mole fraction shall be lower than 10 %, containment integrity shall be kept from combustion of hydrogen, and detonation and global fast turbulent combustion shall be avoided. KHNP provided some analysis which show hydrogen mole fraction is less than 10 % and detonation and global fast turbulence combustion are avoided for postulated severe accident events which covered over 90 % of CDF (core damage frequency) for each NPP. The results were from MAAP code that can simulate from the initiation of the accidents to hydrogen distribution inside containments. It is a Lumped-Parameter codes in which the transport of energy and mass is possible in only predetermined one direction. Therefore, there has been a long-history dispute whether one-dimensional LP codes could simulate the transportation of hydrogen accurately. For example, KHNP made a MAAP model to simulate hydrogen distribution in KSNP (Korean Standard Nuclear Plants), and the containment free volume is divided into 27 nodes in which it is assumed all the properties like each molecule mole fraction and temperate are uniform in each node. In addition, the maximum volume size of them is over 22,000 m{sup 3}, and it is not quite confident that the mole fraction of each molecules and temperature are uniform in the big size space. As for the stress test results of the Wolsong 1, civil experts asked KHNP to conduct hydrogen distribution analysis using Computational Fluid Dynamics (CFD) methodology, and if needed to install hydrogen ignitors in Wolsong 1 NPP. As a reviewer for KHNP's post actions to the Stress Test, the author also asked KHNP to do CFD analysis of hydrogen distribution, and KHNP finally agreed to analyze it using CFD by 2017. KHNP submitted a Shin-hanul 1 and 2 Operation License application in 2015, and the author also asked it to do CFD analysis to simulate hydrogen distribution for Shin-hanul 1 and 2

The effectiveness of parent participation in occupational therapy for children with developmental delay

Directory of Open Access Journals (Sweden)

Lin CL

2018-02-01

Full Text Available Chien-Lin Lin1,2 Chin-Kai Lin,3 Jia-Jhen Yu4 1Department of Physical Medicine and Rehabilitation, China Medical University Hospital, 2School of Chinese Medicine, College of Chinese Medicine, China Medical University, 3Program of Early Intervention, Department of Early Childhood Education, National Taichung University of Education, 4Occupation Therapy Unit of Rehabilitation Techniques Section, Lin Shin Medical Corporation Wuri Lin Shin Hospital, Taichung, Taiwan Introduction: This study aims to explore the impact of Parent Participation Program on the development of developmental delay children. Methods: Pretest-posttest equivalent-group experimental design study was used in this paper. A total of 30 pairs of developmental delay children aged 0–72 months and their parents participated into this study. They were divided into two groups, namely control group and experimental group, according to parents’ wishes. The objects of study in control group received 16 courses of direct rehabilitation therapy; those in experimental group received 8 courses of direct rehabilitation therapy and 8 courses of instruction and tracking of Parent Participation Program. The duration of the intervention was 8 weeks. All cases should be evaluated before and after the intervention, to analyze the difference before and after intervention and among groups. The statistical methods in this paper included descriptive analysis, Chi-square test, independent sample t-test, pair-sample t-test. Results and conclusion: The intervention of Parent Participation Occupational Program has positive impact on the development of developmental delay children in various fields. Among all the intervention results, the progress of the experimental group is 1.895 times more than that of the control group. With parent involvement, Parent Participation Occupational Therapy can promote the cognitive ability, language ability, action ability (gross and fine movement, social competence and

EXTERIOR PHENOTYPICAL PERFORMANCE PARAMETERS AT ROSO SL EGGS HYBRID AT 45 WEEKS OF AGE

Directory of Open Access Journals (Sweden)

SIMONA PASCALĂU

2008-10-01

Full Text Available The biological material which was studied has been represented by 34 ROSO SL hybrid that lay eggs, of 45 weeks of age. We have analyzed the 45 weeks age as a middle age for the intensity of egg laying on the level of over 80%. Measurements have been made for the following conformation traits: body weight, body length, former depth, former width, pelvis width, length of the breast-bone careen, thoracic perimeter, shin perimeter and length. The measurements have been made according to the methodology and the known speciality instruments. The observation data have been overworked, this way we have established the average values and the variability parameters for the traits we followed, which fit the values presented in the specialty literature and are even over these for the age group chosen for studies. The body weight of 2058.82 ± 38.49 g, superior to the one mentioned in the technological guide, confirms a proper unrolling of the body weight deposits and shows that the Roso SL hybrid will properly support both the body growth in weight and also egg production in parallel, respectively this double effort, fact that gives the hybrid a higher quality. Other registered values are of 18.06 ± 0.15 for the body length, of 10.85 ± 0.11 cm for the length of the breastbone careen, together with the sizes which maintain a proper egg production, such as the width of the pelvis of 9.75 ± 0.14, the former width of 6.78 ± 0.10 cm and, why not, even the former depth of 10.72 ± 0.12. We would also notice an appreciable uniformity of these values, the limits of the variation factor being between 4.66 (length of the shin and 8.36 (former width. The values that the biological material represent for the characters we studied, convince us about the hybrid’s availability for being exploited in the egg production.

Safety R and D Needs in Multi-Unit PSA from a Regulatory Viewpoint

Energy Technology Data Exchange (ETDEWEB)

Heo, Gyunyoung; Yoon, Ji Woong [Kyung Hee University, Yongin (Korea, Republic of); Kim, Man Cheol [Chung-Ang University, Seoul (Korea, Republic of)

2016-10-15

The Nuclear Safety and Security Commission (NSSC) NSSC’s recent approval of the construction permits and operation licenses of Shin Kori units 3 to 6 has brought attention to the multi-unit probabilistic safety assessment (PSA). The disaster in Fukushima revealed the risks associated with the use of spent fuel pools (SFPs), and the linear (or non-linear) consequences of radiation leaks from multi-units in particular, has raised concerns. The number of nuclear power plants (NPPs) in operation will increase to ten at the Kori and Shin Kori sites when the construction of Units 5 and 6 is complete - the highest concentration of power reactors in one region in world history. Nuclear disasters do not happen frequently, but when one does happen, its cascading effects can inflict massive human and environmental loss. Proper safety measures are needed as more nuclear installations are put in place. Nuclear regulators are forced to promptly produce a sufficient degree of realistic and objective risk assessment results to meet the rapidly-increasing demand for multi-unit PSA, while striving to achieve matching levels of technological development. The issues with the technological aspects of PSA would still be inherent even after a few years of research, and ensuring the safety of multi-units would still prove challenging. Experts are however relieved that the general public is now much more familiar with the concept of PSA than in the past, which indicates a rise in the degree of public understanding of technology. More studies should be done on multi-unit regulation and safety so as to steer the government in the proper direction for enacting policies aimed to ensure the health of local residents. In conclusion, the technical problems associated with multi-unit PSA that were not mentioned in this paper are essentially similar to their single-unit counterparts, therefore, reinforcing the base infrastructure of PSAs in general will work towards resolving such technical

Circulation-based Modeling of Gravity Currents

Science.gov (United States)

Meiburg, E. H.; Borden, Z.

2013-05-01

Atmospheric and oceanic flows driven by predominantly horizontal density differences, such as sea breezes, thunderstorm outflows, powder snow avalanches, and turbidity currents, are frequently modeled as gravity currents. Efforts to develop simplified models of such currents date back to von Karman (1940), who considered a two-dimensional gravity current in an inviscid, irrotational and infinitely deep ambient. Benjamin (1968) presented an alternative model, focusing on the inviscid, irrotational flow past a gravity current in a finite-depth channel. More recently, Shin et al. (2004) proposed a model for gravity currents generated by partial-depth lock releases, considering a control volume that encompasses both fronts. All of the above models, in addition to the conservation of mass and horizontal momentum, invoke Bernoulli's law along some specific streamline in the flow field, in order to obtain a closed system of equations that can be solved for the front velocity as function of the current height. More recent computational investigations based on the Navier-Stokes equations, on the other hand, reproduce the dynamics of gravity currents based on the conservation of mass and momentum alone. We propose that it should therefore be possible to formulate a fundamental gravity current model without invoking Bernoulli's law. The talk will show that the front velocity of gravity currents can indeed be predicted as a function of their height from mass and momentum considerations alone, by considering the evolution of interfacial vorticity. This approach does not require information on the pressure field and therefore avoids the need for an energy closure argument such as those invoked by the earlier models. Predictions by the new theory are shown to be in close agreement with direct numerical simulation results. References Von Karman, T. 1940 The engineer grapples with nonlinear problems, Bull. Am. Math Soc. 46, 615-683. Benjamin, T.B. 1968 Gravity currents and related

Survey report. New energy vision formulation project for Osa Town, Okayama Prefecture; 2001 nendo Osa cho shin energy vision sakutei tou jigyo chosa hokokusho. Chiiki shin energy vision sakutei tou jigyo

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-02-01

A New Energy Vision was formulated for Osa Town after investigations about energy demand, new energy reserves, and their available amounts. The town consumes approximately 50.6-billion kcal in total, with automobiles consuming a half thereof as fuel. Studies were made about new energy reserves and recoverable amounts in the town, and then an estimation was made that 16.2 times 10{sup 5} kWh/year would be recoverable from photovoltaic energy, 1.58 times 10{sup 5} kWh from small-scale hydropower, 8.79 times 10{sup 6} kWh from ligneous biomass, and 1.96 times 10{sup 5} kWh from livestock biomass, and that 40 MW, for example, would come from wind power, subject to change depending on the wind power generator system to be built. Projects for new energy introduction were discussed, which involved the use of biodiesel fuel for official vehicles, installation of solar hot water showers in primary and junior high schools, application of photovoltaic/wind power to crime prevention lights and street lamps, snow melting systems for roads utilizing geothermal energy, use of heat from thinnings and ligneous waste, wind power facilities, small-scale hydropower facilities, introduction of new energy appliances into sightseeing facilities, and the introduction of photovoltaic power or the like into public facilities. (NEDO)

Relationship between natural tooth shade and skin colour.

Science.gov (United States)

Nourbakhsh, M; Mousavinejad, N; Adli, A R; Harati, M

2013-06-01

The purpose of this study was to assess the correlation of skin colour and tooth shade. One hundred and twenty six individuals aging between 18 to 25 years participated in this study. Colour of the maxillary central incisors was examined by VITA easy shade. Tooth shades were assigned to four ordinal values. Nivea Beauty Protect Foundation shade sample was used as a guide to assess facial skin colour Shin colours were also assigned to four ordinal values. Spearman test revealed that there was a significant relationship between tooth shade and skin colour Total co-relation factor was 51.6% (p men (p <0 .01). The highest tooth shade prevalence belonged to the second group and the highest skin colour prevalence was also in the second skin colour group.

Development of the Digital Reactor Safety System

International Nuclear Information System (INIS)

Lee, Dong Young; Lee, C. K.; Hwang, I. K.

2008-04-01

Objectives of Project - Development of Digital Safety Grade PLC and Licensing - Development of Safety System(RPS) and Licensing - Development of Safety System(ESF-CCS) and Licensing Content and Result of Project - POSAFE-Q PLC : Development of PLC platform for Shin-UCN unit 1 and 2 ·Development Scope : Processor module, Power module, 3 kinds of Communication module, Bus extension module(Master and Slave), 16 kinds of Input and Output module ·PLC application software development tool(pSET) - IDiPS RPS and IDiPS ESF-CCS : Development of PPS for Sin-UCN 1 and 2 ·Development Scope - 4-channels RPS with the KNICS inherent architecture - A part of 1-channels ESF-CCS with the KNICS inherent architecture - Licensing ·optical Report Submitted and Expected to finish the licensing process until Aug. 2008

Allergic contact dermatitis in childrenwhich factors are relevant? (review of the literature)

DEFF Research Database (Denmark)

de Waard-van der Spek, Flora B; Andersen, Klaus Ejner; Darsow, Ulf

2013-01-01

defined dermatitis on the lower legs. Clinical polymorphism of contact dermatitis to clothing may cause difficulties in diagnosing textile dermatitis. Toys are another potentially source of hapten exposure in children, especially from toy-cosmetic products such as perfumes, lipstick and eye shadow......Allergic Contact Dermatitis (ACD) in children is increasing. Sensitization to contact allergens can start in early infancy. The epidermal barrier is crucial for the development of sensitization and elicitation of ACD. Factors that may influence the onset of sensitization in children are atopic...... dermatitis, skin barrier defects and intense or repetitive contact with allergens. Topical treatment of ACD is associated with cutaneous sensitization, although the prevalence is not high. ACD because of haptens in shoes or shin guards should be considered in cases of persistent foot eruptions or sharply...

Magnetotelluric inversion via reverse time migration algorithm of seismic data

International Nuclear Information System (INIS)

Ha, Taeyoung; Shin, Changsoo

2007-01-01

We propose a new algorithm for two-dimensional magnetotelluric (MT) inversion. Our algorithm is an MT inversion based on the steepest descent method, borrowed from the backpropagation technique of seismic inversion or reverse time migration, introduced in the middle 1980s by Lailly and Tarantola. The steepest descent direction can be calculated efficiently by using the symmetry of numerical Green's function derived from a mixed finite element method proposed by Nedelec for Maxwell's equation, without calculating the Jacobian matrix explicitly. We construct three different objective functions by taking the logarithm of the complex apparent resistivity as introduced in the recent waveform inversion algorithm by Shin and Min. These objective functions can be naturally separated into amplitude inversion, phase inversion and simultaneous inversion. We demonstrate our algorithm by showing three inversion results for synthetic data

Reactivation of Cutaneous Leishmaniasis after Renal Transplantation: A Case Report

Directory of Open Access Journals (Sweden)

Hossein Mortazavi

2014-01-01

Full Text Available A 45-year-old man with reactivation of previously existing and subsiding cutaneous leishmaniasis on his wrist and lower leg (shin after renal transplantation was admitted to our dermatology service on March 2008. He presented to us with two huge tumoral and cauliflower-like lesions. Skin smear and histopathology of skin showed leishman bodies and confirmed the diagnosis. After renal transplantation, he received cyclosporine plus prednisolone to induce immunosuppression and reduce the probability of transplant rejection. After immunosuppressive therapy, reactivation of cutaneous leishmaniasis with the above presentation took place. The patient responded to 800 mg/day intravenous sodium stibogluconate for 3 weeks plus local cryotherapy. Systemic plus local therapy along with reducing the doses of immunosuppressive drugs led to improvement of lesions. Reactivation of leishmaniasis after immunosuppression has been rarely reported.

Fiscal 2000 achievement report. Development of energy use rationalization-oriented silicon manufacturing process (Development of silicon substrate manufacturing technology for high-quality solar cell); 2000 nendo shin energy sangyo gijutsu sogo kaihatsu kiko kyodo kenkyu gyomu seika hokokusho. Energy shiyo gorika silicon seizo process kaihatsu (Kohinshitsu taiyodenchiyou silicon kiban seizo gijutsu no kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Research and development was conducted for enhancing productivity and energy conservation by rendering continuous and automatic the electromagnetic casting process for manufacturing polycrystalline silicon substrates for solar cells. In the manufacture of ingots for substrates by continuous electromagnetic casting, the chuck type system for feeding power to the melt plasma was replaced by a roller type system, and the power feeding position was moved to the high temperature region. Also, an on-line ingot slicing technique was established. In the manufacture of substrates at a slicing rate of 300 {mu}m/minute, productivity of 115,000 wafers/month, yield of 98%, and thickness tolerance of 30 {mu}m were achieved. A high-speed cleaning technique was developed using a jet stream, by which the cleaning time was reduced to 5 minutes and the slurry recovery rate was elevated to 95%. Based on these, substrate-related costs in the case of 100 MW/year production was calculated, which resulted in a cost of 98.8 yen/wafer (target: 103.3 yen/wafer) for manufacturing 15 cm square substrates from ingots and in a 15 cm square substrate slicing and cleaning cost of 135.1 yen/wafer (target: 135.4 yen/wafer). (NEDO)

Nonlinear analysis and simulation of soliton in the traffic flow; Kotsu jutai soliton no hassei kiko nikansuru kenkyu

Energy Technology Data Exchange (ETDEWEB)

Matsumura, M. [Shizuoka University, Shizuoka (Japan); Nagatani, T. [Shizuoka University, Shizuoka (Japan). Faculty of Engineering

1999-07-25

Traffic jams are investigated numerically and analystically in the optimal velocity model on a single-line highway. The condition is found whether or not traffic jams occur when a car stops instantly. It is shown that traffic soliton appears at the threshold of occurrence of traffic jams. The Korteweg-de Vries (KdV) equation is derived from the optimal velocity model by the use of the nonlinear analysis. It is found that the traffic soliton appears only near the neutral stability point. The soliton obtained from the nonlinear analysis is consistent with that of the numerical simulation. (author)

Numerical analysis of macro-crack formation behavior within the lump coke; Cokes sonai kiretsu shinten kiko no kaiseki

Energy Technology Data Exchange (ETDEWEB)

Aoki, H; Sato, H; Miura, T [Tohoku University, Sendai (Japan). Faculty of Engineering

1995-03-15

The thermal stress analysis within lump coke was studied in order to investigate macro-crack formation and deformation behavior which strongly influence heat and mass transfer in a coke oven chamber. The dilatation of plastic layer, heating rate dependence of thermophysical and mechanical properties of coal/coke, creep in the plastic and semi-coke layers, macro-crack propagation and radiative heat transfer within the macro-crack were considered in an analytical model. The macro-crack propagation was determined from the estimated crack tip stress intensity factor, K{sub I}, at the macro-crack tip compared with the plane strain fracture toughness, K{sub IC}, through the unsteady-state calculation. Calculated results on crack formation and deformation behavior of lump coke were in good agreement with experimental observations in a laboratory-scale oven chamber. The analytical model could predict micro-crack formation within the lump coke normal to the heated wall and the coke surface close to the heated wall. 12 refs., 13 figs.

Water depth effects on impact loading, kinematic and physiological variables during water treadmill running.

Science.gov (United States)

Macdermid, Paul W; Wharton, Josh; Schill, Carina; Fink, Philip W

2017-07-01

The purpose of this study was to compare impact loading, kinematic and physiological responses to three different immersion depths (mid-shin, mid-thigh, and xiphoid process) while running at the same speed on a water based treadmill. Participants (N=8) ran on a water treadmill at three depths for 3min. Tri-axial accelerometers were used to identify running dynamics plus measures associated with impact loading rates, while heart rate data were logged to indicate physiological demand. Participants had greater peak impact accelerations (prunning immersed to the xiphoid process. Physiological effort determined by heart rate was also significantly less (prunning immersed to the xiphoid process. Water immersed treadmill running above the waistline alters kinematics of gait, reduces variables associated with impact, while decreasing physiological demand compared to depths below the waistline. Copyright © 2017 Elsevier B.V. All rights reserved.

Pilot-scale test for electron beam purification of flue gas from coal-combustion boiler

International Nuclear Information System (INIS)

Namba, Hideki; Tokunaga, Okihiro; Hashimoto, Shoji; Doi, Yoshitaka; Aoki, Shinji; Izutsu, Masahiro

1995-01-01

A pilot-scale test for electron beam treatment of flue gas (12,000m 3 N/hr) from coal-fired boiler was conducted by Japan Atomic Energy Research Institute, Chubu Electric Power Company and Ebara Corporation, in the site of Shin-Nagoya Thermal Power Plant in Nagoya, Japan. During 14 months operation, it was proved that the method is possible to remove SO 2 and NO x simultaneously in wide concentration range of SO 2 (250-2,000ppm) and NO x (140-240ppm) with higher efficiency than the conventional methods, with appropriate operation conditions (dose, temperature etc.). The pilot plant was easily operated with well controllability and durability, and was operated for long period of time without serious problems. The byproduct, ammonium sulfate and ammonium nitrate, produced by the treatment was proved to be a nitrogenous fertilizer with excellent quality. (author)

An Inquiry of Intentions in Kim Hye-yong's 'First Meeting': A North Korean Short Story in Korea Today (2007.

Directory of Open Access Journals (Sweden)

Alzo David-West

2013-11-01

Full Text Available This paper examines the problem of the intentional fallacy in the North Korean short story 'First Meeting' by Kim Hye-yong. Serially published in Korea Today in 2007, the nationalist allegory centres on Shin Ch'ong-mi, a young female journalist in Pyongyang, who falls in love with her penfriend Song-u, a soldier in the Korean People's Army, and struggles to remain devoted to him when he suddenly stops writing. With the literary-critical method of counterintuitive reading, the inquiry analyses the structural relations of the narrative, its discourse on desire, its apparent intentions, and its contravening elements, revealing an incidental unstable narrative that is symbolically protesting of the moral of the story to affectionately embrace the political authority of the North Korean party-army regime in the military-first (songun era.

Generating Conflict for Greater Good: Utilizing Contingency Theory to Assess Black and Mainstream Newspapers as Public Relations Vehicles to Promote Better Health among African Americans

Science.gov (United States)

Lumpkins, Crystal Y.; Bae, Jiyang; Cameron, Glen T.

2010-01-01

The potential use of strategic conflict management ( Wilcox and Cameron, 2006; Cameron, Wilcox, Reber and Shin ( in press) as a health advocacy tool in US African-American and mainstream newspapers, arguing that escalation of conflict can increase effectiveness of health-related news releases. For health communicators focusing on at-risk populations with poor health outcomes, such goals would include increased awareness of health problems and solutions, along with increased motivation arising from indignation over health disparities. Content analysis of 1,197 stories in 24 Black and 12 mainstream newspapers showed that more conflict factors were present in Black vs. mainstream newspapers, suggesting a way to strategically place health messages in news releases disseminated to newspapers that motivate at-risk publics to better health. The findings suggest that conflict factors such as racial disparity data regarding health issues may enhance media advocacy. PMID:22822291

[Primary cutaneous Nocardia brasiliensis cellulitis in immunocompetent child].

Science.gov (United States)

Shachor-Meyouhas, Yael; Ravid, Sarit; Suhair, Hanna; Kassis, Imad

2012-08-01

Primary cutaneous nocardiosis is an infrequent infection among children, generally affecting immunocompromised hosts. It is caused by Gram positive bacteria, partially alcohol and acid resistant which are saprophytes of the soil, water and organic matter. In most cases the causal agent enters through inhalation, and hematogenous dissemination may occur mainly among the immune compromised patients. Direct cutaneous inoculation is less frequent, especially among children. We report an 8-year old female who lives in an urban house with a small garden, who presented with an ulcer on her right shin accompanied by surrounding cellulitis, pain, swelling and fever. The patient's medical history was unremarkable, with no exposure to animals or travelling, except for rafting on the Jordan River the previous week. Culture from the ulcer grew Nocardia brasiliensis, and she recovered after 8 weeks of therapy with trimethoprim-sulphamethoxazole.

Self-reported and reported injury patterns in contemporary dance students.

Science.gov (United States)

Baker, Jo; Scott, Daniel; Watkins, Katherine; Keegan-Turcotte, Sheramy; Wyon, Matthew

2010-03-01

Injury is a major concern among dancers, as currently rates are reported as being high. The purpose of the present study was to assess the incidence and details of injuries across an academic year at a full-time contemporary dance school. A questionnaire was distributed to 57 dancers at the end of their first academic year. Reported injury information was also retrieved from a database as collected from a physiotherapist over the same period. Differences were found between the reported and self-reported information, particularly with reference to shin injuries. The majority of injuries occurred in November and May, noted to be close to assessment periods. Injury rates in contemporary dance are high; notably, 89% of dancers reported one or more injuries. This problem is particularly evident in the lower limb. Med Probl Perform Art 2010; 25:10-15.

Comparative efficacy of one versus two doses of praziquantel on cure rate of Schistosoma mansoni infection and re-infection in Mayuge District, Uganda

DEFF Research Database (Denmark)

Tukahebwa, Edridah M.; Vennervald, Birgitte J; Nuwaha, Fred

2013-01-01

BACKGROUND: The current recommended control strategy for schistosomiasis is annual treatment using 40 mg/kg of praziquantel. However, praziquantel is only effective on adult worms and giving a second dose may increase its efficacy. We assessed the effect of one versus two doses of praziquantel...... on cure rate and re-infection with Schistosoma mansoni in a high endemic community along Lake Victoria, Uganda. METHODOLOGY: To investigate the effect of the two regimens, 395 infected people were randomised into two groups; one received a single standard dose of praziquantel (Distocide® 600 mg, Shin...... Poong Pharmaceuticals, Seoul, Republic of Korea), 40mg/kg body weight, while the other group received a second dose 2 weeks later. Cure rate and infection intensity were assessed 9 weeks after the first treatment using standard parasitological procedures. Re-infection levels were monitored 8 and 24...

Hypermobility and injuries in a professional ballet company.

Science.gov (United States)

Klemp, P.; Learmonth, I. D.

1984-01-01

A study was conducted on members of the Cape Performing Arts Board (CAPAB) professional ballet company to determine the prevalence of hypermobility and to document the injuries sustained over a ten year period. If forward flexion, which is acquired through training, is excluded as a parameter the difference in hypermobility between dancers and controls is not statistically significant. Considering the stresses imposed on the musculoskeletal system, the number of injuries was surprisingly low. Ligamentous injuries about the ankle and knee were both common and accounted for the major morbidity. There were minor differences in the nature and severity of injuries in the male and female dancers. Back injuries, fractures and osteoarthrosis were uncommon and shin splints was not recorded in any of the dancers. Images p143-a p143-b Figure 1 Figure 2 Figure 3 PMID:6435713

Generating Conflict for Greater Good: Utilizing Contingency Theory to Assess Black and Mainstream Newspapers as Public Relations Vehicles to Promote Better Health among African Americans.

Science.gov (United States)

Lumpkins, Crystal Y; Bae, Jiyang; Cameron, Glen T

2010-03-01

The potential use of strategic conflict management ( Wilcox and Cameron, 2006; Cameron, Wilcox, Reber and Shin ( in press) as a health advocacy tool in US African-American and mainstream newspapers, arguing that escalation of conflict can increase effectiveness of health-related news releases. For health communicators focusing on at-risk populations with poor health outcomes, such goals would include increased awareness of health problems and solutions, along with increased motivation arising from indignation over health disparities. Content analysis of 1,197 stories in 24 Black and 12 mainstream newspapers showed that more conflict factors were present in Black vs. mainstream newspapers, suggesting a way to strategically place health messages in news releases disseminated to newspapers that motivate at-risk publics to better health. The findings suggest that conflict factors such as racial disparity data regarding health issues may enhance media advocacy.

Never Die Alone: Death and Birth in Pure Land Buddhism : Jonathan Watts and Yoshiharu Tomatsu, editors, 2008, Jodo Shu Press (Tokyo, 978-4-883-63041-7, 175 pp.).

Science.gov (United States)

Maymind, Ilana

2017-09-01

This is a review of a collection of six essays. These essays, with the exception of one, are written by the followers of Shin Buddhism (Pure Land Buddhism). The last essay in this collection is written from the perspective of Theravada Buddhism rather than Mahayana Buddhism. This collection is a result of the initiative by Rev. Yoshiharu Tomatsu who, as a Buddhist priest, has acquired hands-on experience in dealing with grieving Temple members and became acutely aware of the discrepancy between a medical system and a ritualistic Buddhist system. While a medical system overlooks the spiritual needs of the dying, a Buddhist temple system neglects the spiritual needs of the living. This book ensued from a project that was initiated in 2006 and focused on the above-mentioned missing links, aiming to bring into conversation medical and religious practitioners.

New energy vision in Iwaizumi Township area; 2000 nendo Iwaizumicho chiiki shin energy vision

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-02-01

A new energy vision was established in the Iwaizumi Township area in Iwate Prefecture. The heat energy consumed by each household in Iwaizumi Town is 20.5 two-hundred-liter drums, while transportation (railways, buses, trucks and private cars) consumes 12.2 drums annually, and the electric energy field 4.7 drums annually. As the town as a whole, the ratio of utilization as heat energy is relatively high. Therefore, new energy introduction should be focused importantly on use of solar heat hot water supply device and high-level utilization of forestry fuels. The new energy introduction project includes introduction of bio-mass energy to produce heat energy and electric power using livestock excreta, cut woods, thinned woods, and kitchen refuses as the resources, structuring a new energy model for the 'Communication Land Iwaizumi', activation of the central urban area by introducing micro hydropower generation, assistance to proliferation of new energies to town-operated houses, households, and business entities, introduction of new energies into the disaster prevention center, schools, and insurance, medical and welfare facilities, introduction of clean energy automobiles, and uplift of consciousness of town people. (NEDO)

New energy visions for the Town of Ichinohe district; Ichinohecho chiiki shin energy vision

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-02-01

The new energy visions are drawn for Town of Ichinohe, Iwate Pref. The town's population has been generally decreasing since 1975, from 21,433 to 17,906 in 1995. The town consumed energy totaling 288,691Gcal in 1998, of which the transportation sector accounts for 55%, followed by the domestic, commercial and industrial sectors, in this order, the industrial sector accounting for only 7%. The estimated new energy sources available to the town are wind power, power generated by temperature difference at rivers or using snow, solar energy, biomass energy and energy from wastes, in the order of quantity, totaling 137GWh/y as electrical power and 45.6Tcal/y as heat. The priority projects include making Ichinohe Primary School an eco-school, construction of a biomass demonstration plant in the Okunakayama district, introduction of a boiler firing wood chips at Okunakayama Heights, construction of a wind power mill at Takamori Heights, and introduction of new energies by the citizens. (NEDO)

New energy vision of Oshimizu Town; 2001 nendo Oshimizu machi chiiki shin energy vision

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-02-01

For the purpose of promoting the introduction of new energy and enhancing the awareness of it in Oshimizu Town, Ishikawa Prefecture, an investigational study was conducted of the energy consumption amount of the city, existence amount of new energy and project for new energy introduction, and a vision was worked out. The energy consumption amount of the city was 3.02 x 10{sup 11} kcal, out of which electric power was 1.53 x 10{sup 11} kcal, petroleum 1.33 x 10{sup 11} kcal, and LPG 1.59 x 10{sup 10} kcal. As the project for new energy introduction, the following were studied: introduction of photovoltaic power generation to the general center/Oshimizu Junior High School/general household; solar energy utilization for the general center/general household; introduction of wind power generation to the Azuma Line of forest road; biomass power generation project using cattle feces/hog feces; RDF project for waste from Oshimizu Town; introduction of clean energy vehicle (hybrid car/electric car). The amount of new energy introduction from these was estimated at 1,716kL in crude oil conversion, which is equal to 5.3% of the energy demand amount. (NEDO)

New energy vision in Gamagori City area (Aichi Prefecture); Gamagorishi chiiki shin energy vision

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

With an objective of early realization of a district society harmonized with the natural environment, a vision was established as a guideline to achieve systematic and effective introduction of new energies, with cooperation from citizens, business entities, and the administration. The activity achievements were put into order by the following six items: 1) movements in introducing new energy systems, 2) identification of the characteristics of the district and major relevant measures, 3) identification of the current status and characteristics of the energy demand structure in the district, 4) estimation of existence and utilizable quantity of new energies, 5) needs of introduction of new energies in the area, and 6) introduction possibilities, realization measures, and proliferation acceleration measures. Item 6 is composed of considerations given from the result of the initial stage investigation, basic ideas, targets of the introduction, introduction policies, and promotion of energy countermeasures. Plans were made on a solar heat hot water supply system, a photovoltaic power generation system, a wind power generation system, and introduction of clean energy fueled automobiles. Annual supply of 221,790 GJ was estimated. The major components are the automobiles, solar heat hot water system, and power generation systems. (NEDO)

New series of paper pack vending machines; Paper pack jido hanbaiki no shin series

Energy Technology Data Exchange (ETDEWEB)

Ohashi, M. [Fuji Denki Reiki Co. Ltd., Tokyo (Japan); Umino, S. [Fuji Electric Co. Ltd., Tokyo (Japan)

1996-07-10

This paper presents series of paper pack vending machines. These machines may be broadly classified into those of cold drinks and of hot and cold drinks depending on the storage temperature of products. The former is the machine for cooling dairy products at 10{degree}C with a combined stacking by direct-stacked racks and chain-multiracks. The latter is provided with divided storing chambers with each chamber selectively cooled or heated. Products in the hot chamber are canned coffee and the like set at 55{degree}C. The temperature control is performed by a microcomputer. The chain-multiracks are provided with advantages such as capability of handling various kinds of container shapes, storing drinks and foods vertically, replacing products by the change of a shelf attachment with one operation, and storing one liter packs by setting pair columns. The direct-stacked racks are provided with advantages such as versatility of handling various kinds of containers and miniaturization of the mechanism other than the storage part. The installation space was reduced by devising the opening and closing of the door. The control part is capable of setting temperatures differently for cans and paper packs. 7 figs., 1 tab.

New energy vision in Mobara City area (Chiba Prefecture); Mobarashi chiiki shin energy vision

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-02-01

With the saying {sup M}obara, you find good when you live in it' as the target, the 'new energy vision for Mobara City area' was established. The vision is intended to utilize natural gas existing around the city, and utilize energy saving and new energy technologies. Specifically, the vision was established by a discussion committee composed of people of experience and academic standing, related business entities, and organizations, who took into consideration the natural environment, status of energy existence, and economic activities. The activity achievements were put into order by the following seven items: 1) the situation surrounding new energies, 2) district characteristics and viewpoints of introducing new energies, 3) energy demand, 4) existence quantity of new energies, 5) actual status of new energy introduction, and result of hearing investigations, 6) directionality and conception of introducing new energies, and 7) specific project objectives related to new energy introduction. Five projects were set up, including introduction of natural gas fueled automobiles, natural gas utilizing cogeneration and fuel cells, and effective utilization of wastes and bio-mass. (NEDO)

New energy data handbook. Fiscal 1999 edition; Shin energy data shu (1998 nendo ban)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Enumerated concerning new energy in general are the classification of new energy; prospect of energy demand and supply; cost of new energy; policies, laws and regulations, and subsidy systems for new energy in Japan and abroad; etc. Concerning photovoltaic power generation, the introduction of photovoltaic systems, policies toward photovoltaic systems, subsidy systems, the current state of market in Japan and abroad, etc., are mentioned. Similar data are also listed about solar heat exploitation and wind power generation. Concerning fuel cells, the phosphoric acid fuel cell demonstration plant and the result of its operation, the state of development achieved so far in the molten carbonate type, the polymer electrolyte type, and the methanol type are stated. In addition, details are mentioned of refuse-fueled power generation, co-generation, energy remaining unexploited, geothermal power generation, clean energy vehicles, coal liquefaction and gasification, etc. (NEDO)

New energy visions for the Town of Ichinohe district; Ichinohecho chiiki shin energy vision

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-02-01

The new energy visions are drawn for Town of Ichinohe, Iwate Pref. The town's population has been generally decreasing since 1975, from 21,433 to 17,906 in 1995. The town consumed energy totaling 288,691Gcal in 1998, of which the transportation sector accounts for 55%, followed by the domestic, commercial and industrial sectors, in this order, the industrial sector accounting for only 7%. The estimated new energy sources available to the town are wind power, power generated by temperature difference at rivers or using snow, solar energy, biomass energy and energy from wastes, in the order of quantity, totaling 137GWh/y as electrical power and 45.6Tcal/y as heat. The priority projects include making Ichinohe Primary School an eco-school, construction of a biomass demonstration plant in the Okunakayama district, introduction of a boiler firing wood chips at Okunakayama Heights, construction of a wind power mill at Takamori Heights, and introduction of new energies by the citizens. (NEDO)

New energy vision in Murone Village area; 2000 nendo Muronemura chiiki shin energy vision

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-02-01

A new energy vision was established in the Murone Village area in Iwate Prefecture. The population of the village as of 1995 was 6,552 persons, which has continued with slow decrease in the last decade, revealing remarkable departure from agriculture. Energy consumption in this village per person is 11.5 two-hundred-liter drums, and carbon dioxide discharge per person is 5.6t-CO2. This is about 60% of the national average, because of no existence of thermal power plants and factories. The existing quantity of new energies is occupied by bio-mass as the largest because more than 70% of the village area is forest, followed by solar beam and heat. However, in the case of forest, since the energy is actually utilized only from the felled woods, the utilizable quantity is considerably small, whereas the availability of solar beam and heat is higher. With regard to introduction of new energies, the efforts of the introduction thereof are directed to introduction into primary schools, the village office, the special nursing home for elderly people, and the meal providing center for middle schools, in addition to proliferation and enlightenment of household solar systems, and photovoltaic power generation systems. Furthermore, discussions were given on introduction of a pellet burning power plant utilizing waste woods. (NEDO)

List of names of persons well informed on new energies; Shin energy yushikisha meibo

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

In order to establish an environment in which local public organizations and local business entities intending introduction of new energies can obtain easily the information about the technologies thereof and introduction examples, a 'list of names of persons well informed on new energies' was prepared. At the same time, a system was set up, with which these well-informed people can be introduced on NEDO home pages. The list of the names has collected data of the well-informed people granted with patents related to the fields defined in the new energy law as their specialty fields. The criterion for extracting the persons calls for persons who have experience of writing theses on new energies, and who have give lectures on the subject. Other new energy related experts acting in local areas, who were not able of having been extracted by using the above method, were extracted through hearings by key persons in each area. Questionnaire surveys were performed on the extracted specialists, whereas 495 effective answers permitting disclosure were obtained, and detailed items of information were collected on these specialists individually. The specialty fields include 23 new energy fields. The names of persons were arranged in the order of bureaus listed in the Ministry of International Trade and Industry. The names in the bureaus were arranged in the Japanese alphabetical order. (NEDO)

New energy vision in Shioya Town area (Tochigi Prefecture); Shioyacho chiiki shin energy vision

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-02-01

A new energy vision in Shioya Town area was established with objectives to make clear what is to be tackled by the administration and the residents in their respective standings, and elevate their consciousness to the environmental preservation and consciousness regarding the energy problems. The target for new energy introduction quantity in fiscal 2010 was set as CO2 emission quantity reduction to about 3,900 t-c/year, a reduction of 5% of the quantity in fiscal 1999. The activity achievements were put into order by the following seven items: 1) summary of implementing investigations, 2) basic district characteristics, 3) the current status and estimation of energy consumption, 4) estimated calculation on possibility of new energy utilization, 5) discussions and problems on possibilities of the introduction as seen from the district characteristics, 6) the new energy vision, and 7) the future assignments. Item 6 is composed of the introduction target, measures for introduction to achieve the target in fiscal 2010, and development of the leading projects. The projects include small to middle size hydropower generation, photovoltaic and wind power hybrid type power generation, and introduction of clean energy fueled automobiles. (NEDO)

New series of cup combination vending machines; Cup combination jido hanbaiki no shin series

Energy Technology Data Exchange (ETDEWEB)

Mizutani, K.; Hamamoto, K. [Fuji Electric Co. Ltd., Tokyo (Japan); Yokoyama, K. [Fuji Electric Corporate Research and Development, Ltd., Kanagawa (Japan)

1996-07-10

This paper introduces the cup combination vending machines developed as new series. The point of development is to improve the taste of regular coffee, stabilize the taste of a beverage, design a bright door, improve the sanitary condition, and simplify the operativity. To improve the taste of coffee, coffee beans are ground using a mill in the vending machine and extracted at 95{degree}C by the brewer mechanism based on a forced drip system. A heater is provided in the pipe arrangement so as to keep the temperature of hot water that is an important factor for determining the taste. The taste of a powder beverage is stabilized by a uniform reduction function for first-in first-out that holds the freshness of materials and a high-precision discharge function that reduces the dispersion in discharge. Materials can be uniformly reduced by rotating the pin disk in the mixing part at the top of a canister. The taste of a syrup beverage is stabilized by a new-type carbonator that dissolves CO2 in cold water at a high dissolution rate and high retention rate and an ice quantitative unit that reduces the dispersion in ice discharge. 9 figs., 2 tabs.

Utilization of new materials in prestressed concrete. Shin zairyo no puresutoresuto concrete eno tekiyo

Energy Technology Data Exchange (ETDEWEB)

Imai, Y. (Taisei Corp., Tokyo (Japan)); Kato, H. (Building Research Inst., Tokyo (Japan)); Mutsuyoshi, H. (Saitama Univ., Urawa (Japan). Faculty of Engineering)

1994-03-31

In this session for the new materials, almost all of them were the presentation on the fiber reinforced plastics (FRP). Based on these facts, the topics of new materials about PC centered around FRP, and consequently it was found that how it was expected as the new materials and how it is being watched with keen interest. Even in FRP, the presentations on the carbon fiber reinforced plastics (CFRP) and aramid fiber reinforced plastics (AFRP) were a little bit more than those on the glass fiber reinforced plastics (GFRP), and therefore they were felt to be predominant. Although the ones about a fundamental study on the material characters of FRP held approximately 70%, as a content, there were 6 presentations on the design and execution of the actual bridges in which FRP was used for the PC take-up materials and the oblique cable of cable-stayed bridges, consequently it was found that FRP did not stay at a study stage, and was already shifting to the actual application stage. However, at the current situation, there were many of experimental ones like the small scale bridges in the golf courses, and furthermore it can not be said that a guideline for the design and execution is sufficiently established. 2 figs.

Drug–drug interaction of microdose and regular-dose omeprazole with a CYP2C19 inhibitor and inducer

Directory of Open Access Journals (Sweden)

Park G

2017-03-01

Full Text Available Gab-jin Park,1 Soo Hyeon Bae,1 Wan-Su Park,1 Seunghoon Han,1 Min-Ho Park,2 Seok-Ho Shin,2 Young G Shin,2 Dong-Seok Yim1,2 1Department of Clinical Pharmacology and Therapeutics, Seoul St Mary’s Hospital, PIPET (Pharmacometrics Institute for Practical Education and Training, College of Medicine, Catholic University of Korea, Seoul, South Korea; 2College of Pharmacy, Chungnam National University, Daejeon, South Korea Purpose: A microdose drug–drug interaction (DDI study may be a valuable tool for anticipating drug interaction at therapeutic doses. This study aimed to compare the magnitude of DDIs at microdoses and regular doses to explore the applicability of a microdose DDI study. Patients and methods: Six healthy male volunteer subjects were enrolled into each DDI study of omeprazole (victim and known perpetrators: fluconazole (inhibitor and rifampin (inducer. For both studies, the microdose (100 µg, cold compound and the regular dose (20 mg of omeprazole were given at days 0 and 1, respectively. On days 2–9, the inhibitor or inducer was given daily, and the microdose and regular dose of omeprazole were repeated at days 8 and 9, respectively. Full omeprazole pharmacokinetic samplings were performed at days 0, 1, 8, and 9 of both studies for noncompartmental analysis. Results: The magnitude of the DDI, the geometric mean ratios (with perpetrator/omeprazole only of maximum concentration (Cmax and area under the curve to the last measurement (AUCt of the microdose and the regular dose were compared. The geometric mean ratios in the inhibition study were: 2.17 (micro and 2.68 (regular for Cmax, and 4.07 (micro, 4.33 (regular for AUCt. For the induction study, they were 0.26 (micro and 0.21 (regular for Cmax, and 0.16 (micro and 0.15 (regular for AUCt. There were no significant statistical differences in the magnitudes of DDIs between microdose and regular-dose conditions, regardless of induction or inhibition. Conclusion: Our results may be

Effect of zinc oxide nanoparticles on dams and embryo–fetal development in rats

Directory of Open Access Journals (Sweden)

Hong J

2014-12-01

Full Text Available Jeong-Sup Hong,1,2 Myeong-Kyu Park,1 Min-Seok Kim,1 Jeong-Hyeon Lim,1 Gil-Jong Park,1 Eun-Ho Maeng,1 Jae-Ho Shin,3 Yu-Ri Kim,4 Meyoung-Kon Kim,4 Jong-Kwon Lee,5 Jin-A Park,2 Jong-Choon Kim,6 Ho-Chul Shin2 1Health Care Research Laboratory, Korea Testing and Research Institute, Gimpo, 2College of Veterinary Medicine, Konkuk University, Seoul, 3Department of Biomedical Laboratory Science, Eulji University, Seongnam-si, 4Department of Biochemistry and Molecular Biology, Korea University Medical School and College, Seoul, 5Toxicological Research Division, National Institute of Food and Drug Safety Evaluation, Chungcheongbuk-do, 6College of Veterinary Medicine, Chonnam National University, Gwangju, Korea Abstract: This study investigated the potential adverse effects of zinc oxide nanoparticles (ZnOSM20[-] NPs; negatively charged, 20 nm on pregnant dams and embryo–fetal development after maternal exposure over the period of gestational days 5–19 with Sprague Dawley rats. ZnOSM20(- NPs were administered to pregnant rats by gavage at 0 mg/kg/day, 100 mg/kg/day, 200 mg/kg/day, and 400 mg/kg/day. All dams were subjected to caesarean section on gestational day 20, and all the fetuses were examined for external, visceral, and skeletal alterations. Toxicity in the dams manifested as significantly decreased body weight at 400 mg/kg/day and decreased liver weight, and increased adrenal glands weight at 200 mg/kg/day and 400 mg/kg/day. However, no treatment-related difference in the number of corpora lutea, the number of implantation sites, the implantation rate (%, resorption, dead fetuses, litter size, fetal deaths, fetal and placental weights, and sex ratio were observed between the groups. Morphological examinations of the fetuses demonstrated no significant difference in the incidences of abnormalities between the groups. No significant difference was found in the Zn content of fetal tissue between the control and high-dose groups. These results showed

Development of STS and CAPS markers for variety identification and genetic diversity analysis of tea germplasm in Taiwan.

Science.gov (United States)

Hu, Chih-Yi; Tsai, You-Zen; Lin, Shun-Fu

2014-12-01

Tea (Camellia sinensis) is an important economic crop in Taiwan. Particularly, two major commercial types of tea (Paochong tea and Oolong tea) which are produced in Taiwan are famous around the world, and they must be manufactured with specific cultivars. Nevertheless, many elite cultivars have been illegally introduced to foreign countries. Because of the lower cost, large amount of "Taiwan-type tea" are produced and imported to Taiwan, causing a dramatic damage in the tea industry. It is very urgent to develop the stable, fast and reliable DNA markers for fingerprinting tea cultivars in Taiwan and protecting intellectual property rights for breeders. Furthermore, genetic diversity and phylogenetic relationship evaluations of tea germplasm in Taiwan are imperative for parental selection in the cross-breeding program and avoidance of genetic vulnerability. Two STS and 37 CAPS markers derived from cytoplasmic genome and ESTs of tea have been developed in this study providing a useful tool for distinguishing all investigated germplasm. For identifying 12 prevailing tea cultivars in Taiwan, five core markers, including each one of mitochondria and chloroplast, and three nuclear markers, were developed. Based on principal coordinate analysis and cluster analysis, 55 tea germplasm in Taiwan were divided into three groups: sinensis type (C. sinensis var. sinensis), assamica type (C. sinensis var. assamica) and Taiwan wild species (C. formosensis). The result of genetic diversity analysis revealed that both sinensis (0.44) and assamica (0.41) types had higher genetic diversity than wild species (0.25). The close genetic distance between the first (Chin-Shin-Oolong) and the third (Shy-Jih-Chuen) prevailing cultivars was found, and many recently released varieties are the descents of Chin-Shin-Oolong. This implies the potential risk of genetic vulnerability for tea cultivation in Taiwan. We have successfully developed a tool for tea germplasm discrimination and genetic

Ulcerated necrobiosis lipoidica to a teenager with diabetes mellitus and obesity.

Science.gov (United States)

Pătraşcu, Virgil; Giurcă, Claudia; Ciurea, Raluca Niculina; Georgescu, Corneliu Cristian; Ciurea, Marius Eugen

2014-01-01

Many skin lesions are associated with diabetes mellitus (DM) type 1 or 2, due to the use of antidiabetics or to metabolic and endocrine disorders caused by this disease. Necrobiosis lipoidica (NL) occurs more frequently in patients with DM. Painful ulcerations may occur on NL areas in about 20-25% of the cases and usually they are related to trauma. We present the case of a teenager, male, 17-year-old, having NL with multiple plaques, some of them spontaneously ulcerated after about 33 months of onset. He is known with type 1 DM from 2.5 years and the NL preceding the diagnosis of diabetes mellitus with about six months, presented erythematous-infiltrative skin plaques, some ulcerated for about three months, interesting both shins. Based on clinical, histopathological and paraclinical examinations, we established the following diagnoses: ulcerated NL, type 1 DM, moderate mixed dyslipidemia, class I obesity; commissural candidiasis, juvenile acne. Under treatment with Pentoxifyllinum, Sulodexidum, Ketotifenum and topical therapy with 0.2% Hyaluronic acid two months later, we have managed to heal two of the three ulcerated plaques and of the third has become superficial. We applied 0.5% Fluocortolonum on non-ulcerated plaques recording an improvement after two weeks of treatment. NL is a skin disease with a predilection for the shins, more frequent in patients with diabetes and is a part of palisading granulomatous dermatitis, which leads to skin atrophy. NL is found in the 0.3-1.2% of diabetic patients and is rare in children with diabetes (0.006%). It is more common in the patients with type 1 DM. The onset is in the third decade in diabetic patients and in the fourth decade in non-diabetics. There is no consensus concerning the treatment of NL, and the results are often modest. Antiplatelet agents, corticosteroids (local and general), immunomodulatory drugs, cyclins, wide synthetic antipaludics, heparin, Thalidomide are used. NL treatment is very difficult

Sulfate and Chloride Resistance of High Fluidity Concrete including Fly Ash and GGBS for NPP

International Nuclear Information System (INIS)

Noh, Jea Myoung; Cho, Myung Sug

2010-01-01

Fly ash mixed concrete has been used for NPP concrete structures in Korea in order to prevent aging and improve durability since the Shin.Kori no.1,2 in 2005. Concentrated efforts to develop technology for the streamlining of construction work and to affect labor savings have been conducted in construction. The application of high fluidity concrete for nuclear power plants has been the research subject with the aim of further rationalization of construction works. Since high fluidity concrete can have the characteristics of high density and high strength without compaction. However, high fluidity concrete can cause thermal cracking by heat of hydration. For this reason, the amount of pozzolan binder should be increased in high fluidity concrete for nuclear power plants. In this study, the resistance of high fluidity concrete on sulfate and chloride was compared with that of the concrete currently using for nuclear power plants

Topological Weyl semimetals in Bi1 -xSbx alloys

Science.gov (United States)

Su, Yu-Hsin; Shi, Wujun; Felser, Claudia; Sun, Yan

2018-04-01

We investigated Weyl semimetal (WSM) phases in bismuth antimony (Bi1 -xSbx ) alloys by combination of atomic composition and arrangement. Via first-principles calculations, we found two WSM states with Sb concentrations of x =0.5 and 0.83 with specific inversion-symmetry-broken elemental arrangement. The Weyl points are close to the Fermi level in both of these two WSM states. Therefore, it is likely to obtain Weyl points in Bi-Sb alloy. The WSM phase provides a reasonable explanation for the current transport study of Bi-Sb alloy with the violation of Ohm's law [D. Shin, Y. Lee, M. Sasaki, Y. H. Jeong, F. Weickert, J. B. Betts, H.-J. Kim, K.-S. Kim, and J. Kim, Nat. Mater. 16, 1096 (2017), 10.1038/nmat4965]. This paper shows that the topological phases in Bi-Sb alloys depend on both elemental composition and their specific arrangement.

Percutaneous penetration of 3H-Huangbai extracts and H3-berberine

International Nuclear Information System (INIS)

Jin Xipeng; Yu Xiaozhong; Zhang Nianbao; Kuang Jianwen

1992-01-01

The percutaneous penetration of 3 H-huangbai extracts and 3 H-berberine through excised guinea pig and human shins was studied using the static diffusion cell technique. The data were treated with mathematical model of skin absorption. The results showed that huangbai extracts and berberine could penetrate the guinea pig and human skins at (above) dose of 8.38 μg/cm 2 and 14.32 μg/cm 2 , respectively. The amount and rate of penetration increased linearly with the time of exposure and dose. The permeability of berberine through guinea pig and human skins in two vehicles (water and glycol) was lower than that of huangbai extracts. When Huangbai extracts and berberine were applied in glycol solution, the vehicle greatly enhanced the penetration of the two penetrant. The lag time of two penetrant through human skin was longer than that through guinea pig skin

Development of Reactor Coolant Pump for APR1400

Energy Technology Data Exchange (ETDEWEB)

Bang, Sang-Youn; Chu, Sung-Min; Chang, Jin-Young [Doosan Heavy Industries and Construction, Changwon (Korea, Republic of)

2015-10-15

The development was focused on the performance requirements for APR1400 and to achieve the goals of the safety, reliability and adaptability for APR1400 system design. In addition, APR1400 RCP design was customized considering convenience of installation, operation and maintainability. This paper describes the details of the development process, improved design feature and type test results. Based on development of core technology of RCP, DOOSAN supplies the localized and improved APR1400 RCP to Shin-Hanul 1 and 2 Project. This would be good experience that the RCP core technology can break foreign monopoly in supplying the domestic nuclear industry. Also, there expect APR1400 RCP can be sustainable revenue models in nuclear industry. Moreover, development of RCP will be a catalyst to enhance design capacity for equipment and system of nuclear power plant as well as evaluation and verification skills of Korean nuclear industry.

Verbal Communication in the APR1400 Advanced Control Room

International Nuclear Information System (INIS)

Kim, Jong Hyun; Shin, Young Cheol

2007-01-01

This paper introduces the characteristics of communication in advanced main controlghd rooms (MCRs) and some observations from a case study performed for APR1400 MCR. In advanced MCRs, operators need not maintain the same communication patterns as they do in conventional ones. For example, a senior reactor operator (SRO) does not have to rely on board operators for information acquisition and can get any information from his/her own workstation. This situation may also bring about new problems in MCRs such as lack of shared situation awareness and collaboration between MCR operators. To cope with these problems, the APR1400 MCR adapts several approaches in design and training for encouraging operators to communicate with each other. This paper introduces the possible changes of communication patterns and the countermeasures in design and training. Some findings from an integrated system validation for Shin Kori Units 3 and 4 are also presented

Improving the Reliability of LDP through the Divergence of Power Supply for LDP

Energy Technology Data Exchange (ETDEWEB)

Lee, Bang Sil [KHNP CRI, Daejeon (Korea, Republic of)

2016-10-15

The representative operating systems are Large Display Panel (LDP), Operator Workstation (OWS), Computerized Procedure System (CPS). The LDP provides the information which is plant essential safety function, plant operating mode, the state of major operating variable and the important alarm to operator continuously. In case of malfunction and switchover fail of the inverter, it is possible to occur the power loss of LDP. The power of LDP and operator console workstation had been supplied by only 2 non-safety Power Line1/Power Line2 (P.L1/P.L2). This study mentioned the divergence of power for LDP as method of power loss caused by unreliability of inverter. Ultimately, LDP power line has been added, and then it is more improved on the safety of LDP operation than before. So Shin-Kori 3,4 can enhance the reliability and economic, safety of plant.

Percutaneous penetration of [sup 3]H-Huangbai extracts and H[sup 3]-berberine

Energy Technology Data Exchange (ETDEWEB)

Xipeng, Jin; Xiaozhong, Yu [School of Public Health, Shanghai Medical Univ. (China); Nianbao, Zhang; Jianwen, Kuang [Shanghai Inst. of Nuclear Research Acdemic Sinica (China)

1992-02-01

The percutaneous penetration of [sup 3]H-huangbai extracts and [sup 3]H-berberine through excised guinea pig and human shins was studied using the static diffusion cell technique. The data were treated with mathematical model of skin absorption. The results showed that huangbai extracts and berberine could penetrate the guinea pig and human skins at (above) dose of 8.38 [mu]g/cm[sup 2] and 14.32 [mu]g/cm[sup 2], respectively. The amount and rate of penetration increased linearly with the time of exposure and dose. The permeability of berberine through guinea pig and human skins in two vehicles (water and glycol) was lower than that of huangbai extracts. When Huangbai extracts and berberine were applied in glycol solution, the vehicle greatly enhanced the penetration of the two penetrant. The lag time of two penetrant through human skin was longer than that through guinea pig skin.

Myopericytoma proliferating in an unusual anastomosing multinodular fashion.

Science.gov (United States)

Inoue, Takuya; Misago, Noriyuki; Asami, Akihiko; Tokunaga, Osamu; Narisawa, Yutaka

2016-05-01

We herein describe a case of myopericytoma that proliferated in an unusual fashion. Myopericytoma is described as a group of rare, benign, dermal or subcutaneous tumors that are characterized histologically by a striking, concentric, perivascular proliferation of spindle cells and showing apparent differentiation towards perivascular myoid cells. Myopericytoma forms a morphological continuum with myofibroma/myofibromatosis, glomus tumor and angioleiomyoma. The patient was a 64-year-old woman who demonstrated a recurrent ulcer on an atrophic plaque on her left shin. A histopathological examination of the plaque demonstrated that tumor cells proliferated in an anastomosing multinodular fashion along the vessels in the dermis and subcutaneous tissue. In those nodules, there were numerous, small, concentric proliferations of myoid-appearing spindle cells around small vascular lumina. The present case is an unusual example of myopericytoma, manifesting in a characteristic anastomosing, multinodular, infiltrating fashion. © 2015 Japanese Dermatological Association.

New energy vision for Ginoza village. Fiscal 2000 survey report on new energy vision formulation project for Ginoza village; Ginozason shin energy vision. 2000 nendo Ginozason shin energy vision sakutei nado jigyo chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-02-01

A new energy vision has been formulated for Ginoza village, Okinawa Prefecture, for the realization of symbiosis with nature. It is a 5,000-strong entirely farming village situated along the eastern coast at the middle of the main island of the Ryukyus, with energy consumption of 9,982 kl in terms of crude oil in fiscal 1999. The results of activities in this connection are summarized in six chapters, which are (1) the state of the village and new energy, (2) current state of energy supply/demand and outlook for the future, (3) existing amount of new energy, (4) trends of types of new energy under study, (5) feasibility of new energy introduction, and (6) Ginoza village's new energy vision. Chapter (6) is constituted of the general principles of new energy introduction into Ginoza village and a long-term vision of new energy introduction for each field, and discusses the introducible types which are photovoltaic power generation, wind power generation, small scale hybrid power source systems, fuel cells, natural gas fired cogeneration, refuse fueled power generation, and clean energy vehicles. (NEDO)

Report on new energy vision in Koushida Town area; Koushidacho chiiki shin energy vision hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

A new energy vision was established in the Koushida Town area in Miyagi Prefecture. The population of Koushida Town has leveled off in recent years at 20,245 persons in fiscal 2000. However, number of people working outside the town is increasing, and the ratio of the daytime population is decreasing slowly. Agriculture in this town depends mainly on production rice of such brands as 'Hitomebore' and 'Sasanishiki', wherein the agricultural production amount is 3 billion 260 million yen in fiscal 1998. Commercial activities are decreasing its power with the annual retail sales amount of 17 billion 800 million yen, while the product shipping amount from the attracted factories is on the increasing trend, at 25 billion 700 million yen in 1998. The energy consumption is 526 times 10{sup 9} kcal in total, accounted for by the business department at 42.0%, the transportation department at 32.3%, and the consumer department at 25.7%. The annual utilizable quantity of new energies amounts to 28,816 times 10{sup 6} kcal, made available from solar power, wind power, bio-mass, and refuses, which is about 5.5% of the final energy consumption of the town. The new energy introducing project includes introduction of photovoltaic power generation into the town office building, facilities for interchange of citizens and schools, conversion of the automobiles used in the official organizations into clean energy fueled automobiles, the Eco-town Plan for the east side of Koushida Station, and the project of utilizing bio-mass supplied from the livestock market. (NEDO)

Report on new energy vision in Koushida Town area; Koushidacho chiiki shin energy vision hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

A new energy vision was established in the Koushida Town area in Miyagi Prefecture. The population of Koushida Town has leveled off in recent years at 20,245 persons in fiscal 2000. However, number of people working outside the town is increasing, and the ratio of the daytime population is decreasing slowly. Agriculture in this town depends mainly on production rice of such brands as 'Hitomebore' and 'Sasanishiki', wherein the agricultural production amount is 3 billion 260 million yen in fiscal 1998. Commercial activities are decreasing its power with the annual retail sales amount of 17 billion 800 million yen, while the product shipping amount from the attracted factories is on the increasing trend, at 25 billion 700 million yen in 1998. The energy consumption is 526 times 10{sup 9} kcal in total, accounted for by the business department at 42.0%, the transportation department at 32.3%, and the consumer department at 25.7%. The annual utilizable quantity of new energies amounts to 28,816 times 10{sup 6} kcal, made available from solar power, wind power, bio-mass, and refuses, which is about 5.5% of the final energy consumption of the town. The new energy introducing project includes introduction of photovoltaic power generation into the town office building, facilities for interchange of citizens and schools, conversion of the automobiles used in the official organizations into clean energy fueled automobiles, the Eco-town Plan for the east side of Koushida Station, and the project of utilizing bio-mass supplied from the livestock market. (NEDO)

Regional new energy vision for Hita City; 2001 nendo Hita shi chiiki shin energy vision

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-02-01

For promoting the introduction of new energy and for elevating people's consciousness of such in Hita City, Oita Prefecture, surveys and studies were conducted concerning the energy supply/demand trend in the city, the amount of new energy resources in existence, and new energy introduction plans, and a vision was formulated. The city's energy consumption is estimated at 16,216,376 GJ, with the industrial sector responsible for 78.23%, the transportation sector for 11.35%, and the residential and commercial sector for 9.73%. It is in the public sector, general households, forestry, and hog raising that new energy will be utilized. Key projects for new energy introduction were discussed, which covered a residence incorporating a combination of new energies such as solar heat for water heating and photovoltaic power; lumber drying facilities utilizing forestry generated biomass; cogeneration fueled by methane gas from livestock excrements and garbage; photovoltaic power for schools, the city office, etc.; use of photovoltaic power, temperature difference energy, and methane gas at purification centers, etc.; use of clean energy vehicles for official use; etc. (NEDO)

Report on regional new energy vision for Kahoku town; Kahokucho chiiki shin energy vision hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

A regional new energy vision has been formulated for Kahoku town, Kochi Prefecture, which features the introduction of recoverable energy harmonious with nature and friendly to human life and environments. The results of activities conducted in this connection are compiled into nine chapters, which cover (1) Kahoku-town's local characteristics relative to new energy, (2) survey of townspeople's awareness of new energy, (3) amounts of new energy in existence, (4) basic policy toward introduction, (5) study of concrete measures for promoting introduction, (6) study of prioritized projects, (7) establishment of target amounts for introduction, (8) coordination with energy conservation measures, and (9) a system for thrusting forward the regional new energy vision toward embodiment. Chapter (7) comprises the way of setting target values for introduction; study of the target values to be achieved by the industry, administration, and citizenry, respectively; and a conclusion on the target values. Studies are conducted in the chapter about the introduction of solar energy, wind power generation, small scale hydroelectric power generation, cogeneration, clean energy vehicles, and the like. It is predicted that 960 kl/year will be introduced in fiscal 2010 in terms of oil, which accounts for 12% of energy consumption. (NEDO)

Report on new energy vision in Fudai Village area; Fudaimura chiiki shin energy vision hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

A new energy vision was established in the Fudai Village area in Iwate Prefecture. The population of Fudai Village is decreasing from the peak of 4,103 persons in 1985. Its basic industry is fishery and agricultural industries, with the fish and marine product raising industry particularly active. The energy consumption in Fudai Village is, in the decreasing order, the transportation field (48.5%), the social and household field (26.5%), social industry, and manufacturing industry. Homes consume room heating energy at a greater extent. Energies are supplied by fuel oil at 53,554 Gcal (79.3%) and electric power at 11,551 Gcal (17.1%). The new energy introducing project has discussed introduction of cogeneration into the Kurosaki House, introduction of photovoltaic power generation and solar heat utilization systems, and introduction wind power generation as a tourism symbol. Discussions were also given on conversion of the automobiles used in the official organizations into clean energy automobiles. Further discussions were given on introduction of small new energy facilities, such as hybrid illumination, small wind power generation, and photovoltaic power generation, into the village office, the station square, the fish market, facilities in the fishing port, the children's hall, and the Road Station. (NEDO)

Regional new energy vision for Joetsu City; 2001 nendo Joetsu shi chiiki shin energy vision

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-02-01

For promoting the introduction of new energy and for enhancing people's consciousness of such at Joetsu City, Niigata Prefecture, surveys and studies were conducted involving energy consumption of the city, the amount of new energy resources in existence, and new energy introduction projects, and a vision was formulated. The city consumes 3,593 times 10{sup 9} kcal in energy, with the industrial sector responsible for 47.5%, the transportation sector 28.1%, and the residential/commercial sector 24.3%. As for the energy type, oil based fuel accounts for 58.3%, electric power 26.8%, and town gas 8.6%. The amount of carbon dioxide emissions due to energy consumption is estimated at 1,160 kt-CO2. Studies conducted for new energy introduction covered the supply of photovoltaic power to a project on municipal housing construction and a project on promoting the buildup of environment preservation facilities; the installation of a photovoltaic power generation system for a Citizens' Forest buildup project; the installation of a wind power generation system at the Minowadai Square of Recreation and Relaxation for the citizens; the installation of eco-stations to deal with gasoline, propane gas, and natural gas; the extension of financial support for the purchase of low-pollution vehicles; and so forth. (NEDO)

Regional new energy vision for Tadami Town; 2001 nendo Tadami machi chiiki shin energy vision

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-02-01

For promoting the introduction of new energy and for enhancing people's consciousness of such at Tadami Town, Fukushima Prefecture, surveys and studies were conducted involving the energy demand characteristics of the town, the amount of new energy resources in existence, and new energy introduction projects, and a vision was formulated. Though there is not a great change through the year in town's demand for power, more power is necessary in winter for heating and lighting. As for demand for gas and oil, demand for heating oil reaches its peak in winter. New energy introduction projects were discussed, which would utilize snow for the dynamization of industries, and studies were conducted about the selection of items to be stored in snow rooms, selection of proper cold heat utilization systems, care to be taken in the designing of facilities, installation of snow rooms, development of specialty goods proper to the town, and so forth. Eco-school development was also studied as an environmental education project harmonizing with the local circumstances. Discussed for the fostering of welfare were an energy business for a Welfare House, snow handling measures linked to new energy utilization systems, and the like. (NEDO)

Catalysis of metal-clay intercalation compound in the low temperature coal hydrogasification

Energy Technology Data Exchange (ETDEWEB)

Fuda, Kiyoshi; Kimura, Mitsuhiko; Miyamoto, Norimitsu; Matsunaga, Toshiaki

1986-10-23

Focusing the hydrogenating methanation by gaseous phase catalytic reactions of low temperature volatile components, the catalytic effects of Ni metal and the effects of carriers having sensitive effects on the catalytic activities of Ni metal were studied. Sample coals were prepared from Shin-Yubari coal, and Ni hydride-montmorillonite complex catalysts and the catalysts produced by carring Ni nitrate on alumina and burning in hydrogen gas flows were prepared. The hydrogasification were carried out in a reaction tube. As a result, the montmorillonite-Ni compounds catalysts had high catalitic effects and high conversion ratio of 90% or more in the low temperature coal gasification. The catalitic effects of carried Ni metal strongly depended on the carrier substances, and the rank of effects for the carriers was montmorillonite>zeorite>TiO/sub 2/>alpha-Al/sub 2/O/sub 3/>MgO>SiO/sub 2/=gamma-Al/sub 2/O/sub 3/. (3 figs, 3 tabs, 3 refs)

CERN receives prestigious Milestone recognition from IEEE

CERN Multimedia

2005-01-01

The Nobel prize winner Georges Charpak and W. Cleon Anderson, IEEE President, unveil the Milestone bronze plaques. At a ceremony on 26 September at the Globe of Science and Innovation, Mr W. Cleon Anderson, President of the Institute of Electrical and Electronics Engineers (IEEE) formally dedicated Milestone plaques recognising the invention of electronic particle detectors at CERN. The plaque were unveiled by Mr Anderson and Georges Charpak, the Nobel-prize winning inventor of wire chamber technology at CERN in 1968. The IEEE is the world's largest professional association dedicated to the advancement of technology with 365,000 individual members in over 150 countries. Established in 1983, there are currently over 60 Milestones around the world. They honour momentous achievements in the history of electrical and electronics engineering, such as the landing of the first transatlantic cable, code breaking at Bletchley Park during World War II, and the development of the Japanese Bullet train, the Tokaido Shin...

The Bulgarian Emergency Response System for dose assessment in the early stage of accidental releases to the atmosphere

International Nuclear Information System (INIS)

Syrakov, D.; Veleva, B.; Prodanova, M.; Popova, T.; Kolarova, M.

2009-01-01

The Bulgarian Emergency Response System (BERS) is being developed in the Bulgarian National Institute of Meteorology and Hydrology since 1994. BERS is based on numerical weather forecast meteorological information and a numerical long-range dispersion model accounting for the transport, dispersion, chemical and radioactive transformations of pollutants. In the present paper, the further development of this system for a mixture of radioactive gaseous and aerosol pollutants is described. The basic module for the BERS, the numerical dispersion model EMAP, is upgraded with a 'dose calculation block'. Two scenarios for hypothetical accidental atmospheric releases from two NPPs, one in Western, and the other in Eastern Europe, are numerically simulated. The effective doses from external irradiation, from air submersion and ground shinning, effective dose from inhalation and absorbed dose by thyroid gland formed by 37 different radionuclides, significant for the early stage of a nuclear accident, are calculated as dose fields for both case studies and discussed

Introduction to Nuclear Power Plant Environment Supervisory Committee

International Nuclear Information System (INIS)

Lee, Byung Il

2008-01-01

In Korea, there are five nuclear power plant sites, located at Yongkwang, Kori, Shin Kori, Uljin, and Wolsong. Each administrative district has its own NESC (Nuclear plant Environment Public Supervisory Committee) which consists of a steering committee and a center. The purpose of NESC is to let the public survey and inspect nuclear plant environment and then improve a clarity and confidence in plant construction and operation by themselves. In order to understand the situation of NESC and explore ways toward a better role of NESC, in this paper we try to enumerate a few major facts related to a current status of NESC. As a summary, there must be a great role of NESC in the relationship between the residents, a nuclear industry company and the related government division. Furthermore, NESC would certainly do its role for all sides provided that more strong definition of NESC in law, more financial supporting and more philosophical speculation for the being of NESC

Non-linearity of the response accommodative convergence to accommodation ratio.

Science.gov (United States)

Johnston, Miriam S; Firth, Alison Y

2013-09-01

Previous studies have reported variation in stimulus accommodative convergence to accommodation (AC/A) ratio across differing accommodative stimuli. Response AC/A ratio was assessed across 4 accommodative demands to determine if these differences could be due to accommodative inaccuracies to stimuli. Twenty-three student participants aged 18 to 26 years (mean age 20.3 ± 1.7 years) successfully completed all testing conditions. The modified Thorington technique was used at 4 m to measure heterophoria. The Shin Nippon SRW 5000 infrared autorefractor was used to determine accommodative change to -1.50, -3.00, -4.50, and -6.00D lens stimuli. Significant differences were found in response AC/A ratio between different minus lens stimulated accommodative demands (p accommodative stimuli, but tended to increase with accommodative demand. Significant variability in response AC/A ratio was found, both within individuals to different accommodative demands, and between individuals across the data set.

Seismic response of base isolated auxiliary building with age related degradation

International Nuclear Information System (INIS)

Park, Jun Hee; Choun, Young Sun; Choi, In Kil

2012-01-01

The aging of an isolator affects not only the mechanical properties of the isolator but also the dynamic properties of the upper structure, such as the change in stiffness, deformation capacity, load bearing capacity, creep, and damping. Therefore, the seismic response of base isolated structures will change with time. The floor response in the base isolated nuclear power plants (NPPs) can be particularly changed because of the change in stiffness and damping for the isolator. The increased seismic response due to the aging of isolator can cause mechanical problems for many equipment located in the NPPs. Therefore, it is necessary to evaluate the seismic response of base isolated NPPs with age related degradation. In this study, the seismic responses for a base isolated auxiliary building of SHIN KORI 3 and 4 with age related degradation were investigated using a nonlinear time history analysis. Floor response spectrums (FRS) were presented with time for identifying the change in seismic demand under the aging of isolator

Diagnosis of Churg-Strauss Syndrome Presented With Neuroendocrine Carcinoma: A Case Report.

Science.gov (United States)

Park, Dayun; Lee, Ho Jun; Lee, Kwang Hoon; Kwon, Bum Sun; Park, Jin-Woo; Nam, Ki Yeun; Lee, Kyoung Hwan

2017-06-01

Churg-Strauss syndrome (CSS) is a rare systemic vasculitis that affect small and medium-sized blood vessels and is accompanied by asthma, eosinophilia, and peripheral neuropathy. This report describes a case of a 52-year-old man who had a history of sinusitis, asthma, and thymus cancer and who had complained of bilateral lower extremity paresthesia and weakness for a month. Peripheral neuropathy was detected by electrodiagnostic studies. Resection of a mediastinal mass, which was diagnosed as thymic neuroendocrine carcinoma, was performed five months before his visit. After thymectomy, peripheral blood tests revealed a gradual increase in eosinophils. Two months after surgery, he was admitted to the hospital for dyspnea, and nodules of focal consolidation were found in his chest X-ray. One month later, pyoderma occurred in the right shin, and the skin biopsy showed extravascular eosinophilic infiltration. He was diagnosed with CSS after thymectomy, and we report a very rare case of CSS presented with thymic neuroendocrine carcinoma.

A theoretical analysis on vibrational-energy transfers in gases

International Nuclear Information System (INIS)

Mastrocinque, G.

1981-01-01

In order to investigate the relationships between three-dimensional and colinear molecular-collision models with particular emphasis on the role of repulsive and attractive forces in vibrational-energy transfers in gases, a theoretical analysis is developed in this paper. A few known results - mainly the Cottrell and Ream equation, the Takayanagi and the Shin expressions of the transfer probability - relevant to repulsive-force-dominated processes are obtained and/or discussed in the proposed frame. Light is also given on long-range, attractive-forces-dominated processes. The main result of this investigation is that, when a suitable hypothesis is done on the transfer probability, centrifugal effects on the intermolecular trajectories due to standard potentials are negligible in the low-temperature range. A quasi-colinear collision model, which is found to be correlated to the Cottrell and Ream expression for the transfer probability, is regained from a three-dimensional geometry in these conditions. (author)

Method of biomechanical analysis of kicks of the main course in acrobatic rock'n'roll

Directory of Open Access Journals (Sweden)

Petrо Kysym

2017-08-01

Full Text Available Purpose: biomechanical analysis of kicks of the main course in acrobatic rock'n'roll. Material & Methods: following research methods were used: theoretical analysis and generalization of data from special scientific and methodological literature; pedagogical observation; biomechanical computer analysis; video footage of the finals of World championships, Europe championships, Cup of Ukraine (2017 in acrobatic rock and roll. Result: biomechanical analysis of the kicks of the main course by qualified athletes was conducted; kinematics characteristics (path, speed, acceleration, effort of the center of mass (CM biolinks of the athlete’s body (male partner, female partner were obtained: feet, shins, hips. The energy characteristics are determined – mechanical work and kinetic energy of the legs links when performing the kick of main course. Conclusion: it is established that the method of biomechanical analysis of the kick of the main course performance significantly affects the level of technical training of qualified athletes in acrobatic rock and roll.

Clinical utility of phentermine/topiramate (Qsymia™ combination for the treatment of obesity

Directory of Open Access Journals (Sweden)

Shin JH

2013-04-01

Full Text Available Jin Hee Shin,1 Kishore M Gadde2 1Department of Community and Family Medicine, Duke University Medical Center, 2Obesity Clinical Trials Program, Duke University Medical Center, Durham, NC, USA Abstract: Qsymia™ (Vivus Inc, Mountain View, CA, USA, a combination of phentermine and delayed-release topiramate, has been available in the US since September 2012 for the treatment of obesity. Phentermine is an anorexigenic agent, which is approved for the short-term treatment of obesity, while topiramate is approved for nonweight loss indications – seizure disorders and migraine prophylaxis. The amount of weight loss achieved with combination therapy is of a greater magnitude than what could be achieved with either agent alone. Adverse events that occur with the combination therapy are in line with the known side effect profiles of the constituent drugs; teratogenicity, a slight increase in heart rate, psychiatric and cognitive adverse effects, and metabolic acidosis are concerns. Keywords: Qsymia, combination drug, antiobesity drugs, phentermine, topiramate, obesity, weight loss

Evaluation of Fire Hazard and Safety Management of Heritage Buildings in Georgetown, Penang

Directory of Open Access Journals (Sweden)

Othuman Mydin M.A.

2014-03-01

Full Text Available Fire is a subject that is always neglected and ignored as far as heritage buildings are concerned. Unlike newly-built buildings, which are required under UBBL to undergo certain fire protection system tests, people are less likely to carry out such tests and detailed assessments for heritage buildings. Thus, this research is significant as it is aimed at accomplishing several objectives including studying the current fire emergency plan, besides identifying and assessing the possible fire hazards in heritage buildings in Penang. Several case studies were carried out at a few premises such as the Khoo Kongsi, Cheah Kongsi, Hock Teik Chen Shin Temple and the Teochew Temple with the aid of the Fire Rescue Department Malaysia (FRDM. The results obtained from this study will be discussed according to several aspects focusing on general health and safety management at the site, the fire-fighting system, fire exit routes and signage at the temples, fire hazards, and fire detection and alarm.

Case of anal fistula with Fournier's gangrene in an obese type 2 diabetes mellitus patient.

Science.gov (United States)

Yoshino, Hiroshi; Kawakami, Kyoko; Yoshino, Gen; Sawada, Katsuhiro

2016-03-01

A 64-year-old man was admitted to Shin-suma General Hospital, Kobe, Japan, complaining of a 3-day history of scrotal swelling and high fever. He had type 2 diabetes mellitus. On examination, his body temperature had risen to 38.5 °C. Examination of the scrotum showed abnormal enlargement. Laboratory data were as follows: white cell count 35,400/μL and glycated hemoglobin 9.6%. Anal fistula was found in an endorectal ultrasound. Computed tomography scan showed a relatively high density of subcutaneous tissue and elevated air density. Thus, he was diagnosed with Fournier's gangrene. On the fourth hospital day, the patient underwent debridement of gangrenous tissue. Seton surgery was carried out for anal fistula on the 34th hospital day. He responded to the treatment very well. He was discharged on the 33rd postoperative day. Once Fournier's gangrene has been diagnosed, considering the association of anal fistula and perianal abscess is important.

Review of Fire-Induced Multiple Spurious Operation Scenarios for a Pilot Plant

Energy Technology Data Exchange (ETDEWEB)

Kim, Kwang Hong; Lee, Jai Ho; Lee, Do Hwan [KHNP CRI, Daejeon (Korea, Republic of)

2016-10-15

It was preliminarily reviewed that 41 scenarios of 63 scenarios of NEI's generic list could be applicable to design of SKN3. And 22 scenario of NEI's generic list were evaluated not applicable to SKN3. During the review of the scenario contained in NEI 00-01, no additional MSO scenarios specific to SKN3 were identified. For the further study, the final review will be determined and then detailed circuit analysis will be performed by fire zone and area based on the exact location contained the cable and raceway. With the enhancement of fire safety regulation requirements in nuclear power industry, multiple spurious operation (MSO) identification and treatments should be included in post fire safe shutdown analysis (PFSSA). In this study, the MSO scenario reviews are performed for Shin Kori Unit 3(SKN3) which is the first nuclear power plant of the Advanced Power Reactor 1400 constructed in Korea.

New energy vision of the Yokaichi city area. New energy society to be created by all citizen - Yokaichi City; 2001 nendo Youkaichi shi chiiki shin energy vision. Minna no chikara de tsukuru shin energy shakai Youkaichi

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-03-01

For the purpose of promoting the introduction of new energy and enhancing the awareness of it in Yokaichi City, Shiga Prefecture, an investigational study was conducted of the energy demand amount of the city, existence amount of new energy, project for new energy introduction, etc., and a new energy vision was worked out. The energy consumption amount of the city was estimated at approximately 1,004,638 drums in terms of oil drum (200L). By sector, the energy consumption amount was 66.1% in the industrial sector, 17.4% in the transportation sector and 16.5% in the commercial/residential sector. The rate of energy source was 62.2% of fossil fuel, etc., and 37.9% of electric power. As the project for new energy introduction, the following were studied: promotion of introduction of solar energy collector/photovoltaic power generation to general households; introduction of photovoltaic power generation/solar hot water supply space heating system to public facilities; road preparation by installation of street light using photovoltaic power generation; installation of micro wind power generator at the disaster-prevention base; introduction of biomass energy such as wood pellet stove to public facilities; project of rape blossoms (cultivation of rape/production and consumption of rape oil/recovery of waste cooking oil/BDF). (NEDO)

Design and Analysis for an Operator's Action Sharing System

Energy Technology Data Exchange (ETDEWEB)

Jung, Yeonsub; Seong, Nokyu [KHNP Central Research Institute, Daejeon (Korea, Republic of)

2013-10-15

In the paper, contrary to HRP approach, no more FPD is introduced because there is no room to install. The same workstation and the same LDP should be utilized for ream transparency. A action sharing system will be introduced at ShinKori 3,4 MCR, and further applied to other APR1400 plant if necessary. The project started and applied by the end of 2014. Despite benefit of action sharing system, there are lots of challenges to overcome such as traffic load, and interfaces. The challenges have been analyzed thoroughly. Traffic load can be reduced through vector graphics, video driver, and capture and compressing techniques. Furthermore interfaces for action sharing system are developed and evaluated to reduce secondary workload. Advanced digital control rooms have lots of advantages compared to analog control room. They can integrate all process variables into more comprehensible forms. Advanced alarm processor can suppress trivial alarms, and P and ID based mimic isplays can be integrated with context sensitive menu for referencing. Moreover computer based procedures have been introduced at more advanced MCR. Because all these display appears at flat panel display (FPD), they can be easily modified if necessary. These days newly introduced MCRs are advanced types, and analog control rooms are no more built. In spite of this trend, advanced control rooms have shortage in view of team transparency. For example, shift supervisor cannot tell which devices reactor operator is manipulating. APR1400 MCR has large display panel to share the same situation awareness among crew member. Because LDP has fixed display comparing switchable display in FPD, situation awareness can be enhanced. However, even LDP cannot show the active device that crew member are manipulating due to either limited number of devices in LDP or no demarcation for the active device. During construction of ShinKori 3/4, the demarcation box for the active device has been introduced and called an Active

Country Report for Republic of Korea

Energy Technology Data Exchange (ETDEWEB)

Hong, Seong Woon [Shinil General Hospital, 47-7, Suyou5dong, Kangbuk-Gu, 142-070 Suyou 5 Dong (Korea, Republic of)

2008-07-01

Nuclear Power in Korea: Electric generation from 20 reactors: 130,715 million kWh/y; Nuclear generation of total electricity: 40 %. Reactor types: - 4 PHWR (Candu), 16 PWR (6 USA-Westinghouse, 2 French-Framatome, 8 Korean-OPR1000). Nuclear future: - Under Construction: 4 PWR (OPR1000), 2 PWR (APR1400, ShinKori no 3 and 4). - Planned: 2 PWR (APR1400, ShinWooljin no 3 and 4). - R and D investment plan in 2008 managed by MEST (ex- MOST) due to new governmental unification: - next generation reactor: 2 units of APR1400 construction and development of APR1400+, - NTP cooperative research: Gen-IV with SFR, Pyro-process, - Nuclear application: SMART, KSTAR for ITER construction, - Waste disposal management: LILW, SF, Decommission, - RFT, Safety enforcement, radiation protection, public communication, medical use, etc. Nuclear Power in Korea: Status of Radioactive Waste Disposal Site: - Site: Kyeongju, southeast part of Korea, - Size: 2,098,419 m{sup 2}, - Waste type: Low/Intermediate Level Waste (LILW) and RI waste, - Disposal type: Cavern, - Capacity: 1. stage 100,000 drums (total 800,000 drums), - Under Licensing Process for Construction WIN-Korea Activity in 2007: 250 members and 11 organization sponsors. 1. 2007 Symposium on Nuclear with Women: - Topic: 'Rendezvous of Nuclear and Renewable Energy', October 11, 2007 at Conference Hall of National Congress. Audience: 400 from Women NGO and the Assembly. - Panel: six specialists from energy, journalism, and women NGO's discussed about energy secure, saving, development of environment friendly energy, protection from global warming. - Results: public communication effect from mass media. 2. 2007 Symposium Conferences: General Meeting/workshop, Nov. 6, 2007, sponsored by KOFWST (Korea Federation of Women's Science and Technology Associations)/Seoul Education Culture Centre. participants: 100 members. Lectures: 'Women's Self Leadership', 'Survey Results of Public understanding on

Design and Analysis for an Operator's Action Sharing System

International Nuclear Information System (INIS)

Jung, Yeonsub; Seong, Nokyu

2013-01-01

In the paper, contrary to HRP approach, no more FPD is introduced because there is no room to install. The same workstation and the same LDP should be utilized for ream transparency. A action sharing system will be introduced at ShinKori 3,4 MCR, and further applied to other APR1400 plant if necessary. The project started and applied by the end of 2014. Despite benefit of action sharing system, there are lots of challenges to overcome such as traffic load, and interfaces. The challenges have been analyzed thoroughly. Traffic load can be reduced through vector graphics, video driver, and capture and compressing techniques. Furthermore interfaces for action sharing system are developed and evaluated to reduce secondary workload. Advanced digital control rooms have lots of advantages compared to analog control room. They can integrate all process variables into more comprehensible forms. Advanced alarm processor can suppress trivial alarms, and P and ID based mimic isplays can be integrated with context sensitive menu for referencing. Moreover computer based procedures have been introduced at more advanced MCR. Because all these display appears at flat panel display (FPD), they can be easily modified if necessary. These days newly introduced MCRs are advanced types, and analog control rooms are no more built. In spite of this trend, advanced control rooms have shortage in view of team transparency. For example, shift supervisor cannot tell which devices reactor operator is manipulating. APR1400 MCR has large display panel to share the same situation awareness among crew member. Because LDP has fixed display comparing switchable display in FPD, situation awareness can be enhanced. However, even LDP cannot show the active device that crew member are manipulating due to either limited number of devices in LDP or no demarcation for the active device. During construction of ShinKori 3/4, the demarcation box for the active device has been introduced and called an Active

New energy vision of the Ehime prefecture area; 2001 nendo Ehime ken chiiki shin energy vision

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-03-01

For the contribution to environmental preservation and stable supply of energy, 'a new energy vision of the Ehime prefecture area' was worked out which is to be a guide for new energy introduction using photovoltaic power, wind power, etc. In the Uma area, the following were proposed: introduction of waste energy cogeneration to the paper manufacturing industry; study of introduction of small wind turbine to household and business establishment. In the Niihama/Saijo area, introduction of cogeneration to business establishment; creation of the processing/assembly industry for materials/parts of equipment of photovoltaic power generation/wind power generation. In the Imabari area, introduction of natural gas cogeneration to business establishment, creation of the industry for equipment/parts of photovoltaic power generation. In the Matsuyama area, introduction of cogeneration to business establishment; utilization of biomass energy; creation of the industry of production/processing of resin for solar module use. In the Yawatahama/Oozu area, utilization of wind energy for agriculture/forestry, fisheries and tourism fields; study of introduction of biomass energy. In the Uwajima area, utilization of wind power energy for agriculture/fisheries, fisheries and tourism fields; introduction of biomass energy. (NEDO)

New energy vision of the Kosaka town area; 2001 nendo Kosaka machi chiiki shin energy vision

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-03-01

For the purpose of promoting the introduction of new energy and enhancing the awareness of it in Kosaka Town, Akita Prefecture, an investigational study was conducted of the energy demand of the town, existence amount of new energy, project on new energy introduction, etc., and a new energy vision was worked out. The amount of energy demand of the town was 2,442,464 GJ/y. The energy demand consists of C heavy oil (about 1/3) and electric power (about 1/3) in the industrial sector, which are outstanding, and others including kerosene (about 12%) in the commercial/residential sector and light oil (about 10%) and gasoline (about 7%) in the transportation sector. The CO2 emissions from these are 60,000 t-C/y. As the project on the new energy introduction, study was made on the introduction of solar energy/snow cold energy space cooling to the insurance welfare center/interchange center, introduction of the photovoltaic power generation to the Korakukan area/elementary school/junior high school, introduction of the snow melting system using soil heat to town street/sidewalk, use of clean energy vehicle to public vehicle, use of ligneous biomass energy, etc. (NEDO)

New energy vision of the Noogata city area; 2001 nendo Noogata shi chiiki shin energy vision

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-02-01

For the purpose of promoting the introduction of new energy and enhancing the awareness of it in Noogata City, Fukuoka Prefecture, an investigational study was conducted of the energy demand amount of the city, existence amount of new energy, project for new energy introduction, etc., and a vision was worked out. The energy consumption amount of the city was estimated at 4,825.4 x 10{sup 6} MJ/y. It consisted of 47.1% in the industrial sector, 26.1% in the commercial/residential sector and 24.9% in the transportation sector. The rate of energy source was 65.7% of petroleum-base energy and 25.1% of electric power. As the project for new energy introduction, the following were studied: introduction of wind power generation/photovoltaic power generation to the flower park at the foot of Mt. Fukuchi and Nakanoshima park on the sandbank of the Onga river; introduction of photovoltaic power generation to library. Moreover, as future models of the introduction, the potential study was made on the following: installation of the stockbreeding waste biogas plant at the compost center; installation of fuel cell system using digestion gas from night soil treatment facilities; installation of the natural gas cogeneration system in the project on redevelopment of the urban area, etc. (NEDO)

New energy vision of the Gotsu city area; 2001 nendo Gotsu shi chiiki shin energy vision

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-02-01

For the purpose of promoting the introduction of new energy and enhancing the awareness of it in Gotsu City, Shimane Prefecture, an investigational study was conducted of the energy consumption amount of the city, existence amount of new energy, project for new energy introduction, etc., and a new energy vision was worked out. The energy consumption amount of the city was estimated at 1,558,022 Gcal. By sector, the energy consumption amount consisted of 80.0% in the industrial sector, 11.2% of in the transportation sector, 5.8% in the residential sector and 3.0% in the business sector. In the industrial sector, the main energy consumption industries were the paper manufacturing industry and tile industry. As the project for new energy introduction, the following were studied: project for the wind farm where a lot of wind power generators are installed; park as a symbol having 1 or 2 wind power generators; introduction of solar energy use water warmer/photovoltaic power generation to public facilities; system for promotion of the introduction of solar energy use water warmer/photovoltaic power generation to households; project on CO2 reduction by installation of LNG station; refuse/waste power generation project; project on utilization of the waste heat from tile makers. (NEDO)

Reseña: "El buda de la luz infinita: Las enseñanzas del budismo shin"

OpenAIRE

Falero Folgoso, Alfonso

2002-01-01

La conocida y gradualmente nutrida colección de Paidós Orientalia nos ofrece la nueva traducción de un texto ya clásico de un viejo conocido por el lector en castellano. Aunque aún no existe una historia del budismo japonés en lengua castellana. Reseña

New energy vision of the Akita city area; 2001 nendo Akita shi chiiki shin energy vision

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-03-01

For the purpose of promoting the introduction of new energy and enhancing the awareness of it in Akita City, an investigational study was conducted of the energy demand of the town, existence amount of new energy, project on new energy introduction, etc., and a new energy vision was worked out. The population of Akita City was 317,868 as of December 31, 2000, which is continuously on the increase. The amount of energy demand of the whole city was 990,000 kL/y. The energy demand consists of fossil fuels such as petroleum, coal and propane gas (77.7%) and electric power (22.3%). The CO2 emissions from these are 2,908,000 t-CO2. As the project on the new energy introduction, study was made on the installation of the photovoltaic power system and wind power system at base centers and introduction of the waste power system at the Goshono Works. As the model project, study was made on the introduction of the photovoltaic power generation and wind power generation to street light and public facilities, road snow melting/space heating and cooling using soil heat, introduction of clean energy vehicles, BDF introduction using waste cooking oil and rate blossoms, etc. (NEDO)

New energy vision of the Yokohama town area; 2001 nendo Yokohama machi chiiki shin energy vision

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-02-01

For the purpose of promoting the introduction of new energy and enhancing the awareness of it in Yokohama Town, Aomori Prefecture, an investigational study was conducted of the structure of energy demand of the town, existence amount of new energy, introduction of new energy, etc., and a new energy vision was worked out. The population of Yokohama Town was 5,508 as of October 2000, which is slightly decreasing. The number of household was unchanged, though. The amount of energy demand was estimated at 21,368 kL/y in crude oil conversion. The energy demand consisted of petroleum-base energy such as kerosene, light oil, heavy oil and gasoline (about 70%), electric power (20%) and LPG (10%). In the action plan for new energy introduction, the following were studied: wind power generation of which the plan has already been worked on by a private company (15 x 1,750kW class generator), introduction of the photovoltaic power generation to Yokohama Junior High School, hothouse vegetable cultivation using exhaust heat from hot spring, and 'Yokohama Rape Blossoms Eco Project' that mainly includes the agricultural land protection/oil squeezing from rapeseed/recycle of waste cooking oil as fuel, for which rape blossoms as one of the most important resources in Yokohama Town are used. (NEDO)

Programs for promoting new energy introduction into Wakkanai City; Wakkanaishi shin energy donyu sokushin keikaku keikakusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

The average temperature in the summer season at Wakkanai is 19 degrees C, and below zero degrees C in the winter season. Solar radiation duration is shorter in November through February due partly to the presence of snow. In terms of total solar radiation amount, the city occupies a middling position in the whole Hokkaido island. As for the force of the wind, a daily maximum wind velocity of 10m/s or stronger occur on 8 to 10 days every month in the period October through May. As projects for promoting new energy introduction, the below-named ones are chosen and subjected to examination for feasibility. They are a wind power generation system for a water purification plant; a district heating system utilizing cogeneration at the city middle sector; a hybrid system of methane fermentation and wind power generation for a public stock-rearing farm; a hybrid system of cogeneration and photovoltaic power generation for Fujimi district accommodation facilities; and photovoltaic power generation as a clean energy introduction system for a general gymnastic hall of Wakkanai City. Since the above-named subjects are all excellent in economy and environmentally-friendliness, it is suggested that efforts be exerted to realize them. (NEDO)

Effects of co-grazing dairy heifers with goats on animal performance, dry matter yield, and pasture forage composition.

Science.gov (United States)

Dennis, T S; Unruh-Snyder, L J; Neary, M K; Nennich, T D

2012-12-01

Mixed livestock grazing can offer an alternative management system for rearing dairy replacement heifers (Bos taurus). A 2-yr study was conducted during 2009 (yr 1) and 2010 (yr 2) to determine the effects of co-grazing Holstein heifers under rotational stocking with Boer × Kiko goats on animal performance, pasture DM yield, and botanical composition. Each year, 24 heifers (134 ± 6 d of age and 147.4 ± 31.2 kg BW in yr 1; 166 ± 11 d of age and 168.0 ± 27.6 kg BW in yr 2) and 6 goats (2 yr old and 39.7 ± 16.2 kg BW in yr 1; 1 yr old and 33.7 ± 7.4 kg BW in yr 2) were divided into 6 paddocks with 4 heifers and 2 goats, where applicable, per group. Low endophyte-infected tall fescue (Festuca arundinacea Schreb.) and white clover (Trifolium repens L.) pastures were used to evaluate 2 grazing strategies (heifers grazed alone [HO] or heifers co-grazed with goats [HG]). In addition, 6 goats were assigned to 2 paddocks and grazed alone (GO) each year to estimate goat pasture forage intake and compare Haemonchus contortus infection to co-grazed goats. Forage samples were taken monthly to assess DM yield and botanical composition. Samples collected for botanical composition were manually sorted into grass, legume, and weed species. Forage DMI was estimated using a rising plate meter before and after grazing. Heifer BW at the conclusion of yr 1 and yr 2 did not differ between HO and HG (P = 0.40 and P = 0.12, respectively). Likewise, overall ADG did not differ between HO and HG, averaging 0.65 kg/d and 0.63 kg/d over both grazing seasons (P = 0.70). Grazing strategy did not affect forage or total DMI in yr 1; however, HO consumed 2.3 kg/d more forage DM than HG (P pastures (P dairy heifers can be co-grazed with goats without negative effects on ADG or feed efficiency.

Survey on weather changes associated with large-scale tree-planting. 2; Daikibo ryokuka ni tomonau kiko henka ni kansuru chosa. 2

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

An investigational study was made for large-scale tree-planting aiming at CO2 fixation. Water resource and precipitation relating to tree-planting were determined from NASA data and arranged into the global distribution map. It was found that Australia and the Chinese continent are under the relatively favorable condition. As for the soil condition, nutrition resource is short in the desert and unused zone. From the vegetation data obtained from meteorological satellite NOAA, developed was a method for estimating net primary productivity of terrestrial ecosystem and obtained was a global distribution map for the amount of CO2 fixed under the present terrestrial vegetation. At the same time, areas which have great potentiality of tree-planting were selected from the map for estimating potentiality of the global tree-planting. To study the promotion of rainfall as a means of expanding the potential tree-planting area, the conventional meteorological and physical model was improved, and more realistic simulation was made possible. Also as to the water utilization technology, the modeling method was developed. As the area having a potentiality of expanding tree-planting, Australia (especially the west) was cited as the first candidate, and China the second candidate. 108 refs., 128 figs., 49 tabs.

New energy vision for Nomura town. Fiscal 2000 survey report on regional new energy vision formulation project for Nomura town, Ehime Prefecture; Nomuracho shin energy vision. 2000 nendo Nomuracho chiiki shin energy vision sakutei nado jigyo chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-02-01

An effort is being exerted to build a town which will generate but a little environmental impact, with symbiosis with nature established as the highest priority target of the town administrative activities. Under the Nomura town new energy vision, a basic policy and measures are established toward the promotion of new energy introduction, with local features, existence of new energy resources, and the feasibility of new energy adoption taken into consideration. Surveys were made and the results are compiled into seven chapters, which involve (1) the trend of new energy, (2) local features, (3) existing amount and available amount of new energy, (4) basic policy toward the introduction of new energy, (5) main projects for the introduction of new energy, (6) details of the basic policy toward the introduction of new energy, and (7) the Nomura Town Deliberation Committee on New Energy Vision Formulation. Chapter (6) covers the assessment of new energy introduction feasibility, promotion of concretized introduction projects, public relations/enlightening/popularizing activities, and assistance for new energy introduction. Studied for introduction are photovoltaic power generation, solar heat utilization, wind power generation, biomass power generation, and the like. (NEDO)

tOWL: a temporal Web Ontology Language.

Science.gov (United States)

Milea, Viorel; Frasincar, Flavius; Kaymak, Uzay

2012-02-01

Through its interoperability and reasoning capabilities, the Semantic Web opens a realm of possibilities for developing intelligent systems on the Web. The Web Ontology Language (OWL) is the most expressive standard language for modeling ontologies, the cornerstone of the Semantic Web. However, up until now, no standard way of expressing time and time-dependent information in OWL has been provided. In this paper, we present a temporal extension of the very expressive fragment SHIN(D) of the OWL Description Logic language, resulting in the temporal OWL language. Through a layered approach, we introduce three extensions: 1) concrete domains, which allow the representation of restrictions using concrete domain binary predicates; 2) temporal representation , which introduces time points, relations between time points, intervals, and Allen's 13 interval relations into the language; and 3) timeslices/fluents, which implement a perdurantist view on individuals and allow for the representation of complex temporal aspects, such as process state transitions. We illustrate the expressiveness of the newly introduced language by using an example from the financial domain.

Saltwater nectotizing fasciitis following coral reef laceration possibly exacerbated by a long-haul flight: a case report.

LENUS (Irish Health Repository)

Byrne, Ann-Maria

2009-01-01

INTRODUCTION: Necrotising fasciits is a rapidly progressive disease characterised by extensive necrosis of the fascia, skin, and subcutaneous tissue, with relative sparing of the underlying muscle. CASE PRESENTATION: We present the case of a 24-year old Irish male student who sustained a laceration to his right shin from contact with a coral reef while swimming in the Phuket region, off the west coast of Thailand. The following day, he returned to Ireland and presented with an aggressive and destructive variant of group A beta-hemolytic streptococcal necrotising fasciitis originating at the site of the coral reef injury, and exacerbated by the long-haul flight. He was successfully treated with aggressive surgical debridement, vacuum-assisted dressings, split skin grafting and broad spectrum antibiotics. CONCLUSION: Necrotising fasciitis can progress rapidly to systemic toxicity and even death without expedient diagnosis and aggressive treatment. Long-haul flights induce significant fluid accumulation in the lower extremity. These physiological fluid shifts may have contributed to the severity of our patient\\'s necrotizing condition following his flight from Thailand.

ON THE VALIDITY OF PURCHASING POWER PARITY: EVIDENCEFROM ENERGY EXPORTING SUB-SAHARAN AFRICA COUNTRIES

Directory of Open Access Journals (Sweden)

Ntokozo Patrick Nzimande

2015-01-01

Full Text Available Substantial amount of studies have examined the validity of mean-reversion onthe real exchange rate. However very limited studies of this nature have beenconducted in Sub-Saharan Africa countries, particularly energy exportingcountries, hence this study endeavors to find evidence for or against the mean-reversion of the real exchange rate. There is, however inadequate data requiredfor the statistical significance for Sub-Saharan African currencies. Hence thisstudy uses a panel of 5 energy exporting countries, i.e. South Africa,Mozambique, Congo Republic, Nigeria and Angola, to examine the validity of thepurchasing power parity. Relying on the Im, Pesaran and Shin and the Fisher ADFproposed panel unit root tests the study fails to reject the null hypothesis of a unitroot when small sample size is employed however by extending sample size andemploying different price index, i.e. traded goods prices instead of GDP deflatorsthe study reject the null hypothesis of a unit root and hence concludes thepurchasing power parity holds in Sub-Saharan African energy exporting countriesconsidered in the study.

Recent trends in counts of migrant hawks from northeastern North America

Science.gov (United States)

Titus, K.; Fuller, M.R.

1990-01-01

Using simple regression, pooled-sites route-regression, and nonparametric rank-trend analyses, we evaluated trends in counts of hawks migrating past 6 eastern hawk lookouts from 1972 to 1987. The indexing variable was the total count for a season. Bald eagle (Haliaeetus leucocephalus), peregrine falcon (Falco peregrinus), merlin (F. columbarius), osprey (Pandion haliaetus), and Cooper's hawk (Accipiter cooperii) counts increased using route-regression and nonparametric methods (P 0.10). We found no consistent trends (P > 0.10) in counts of sharp-shinned hawks (A. striatus), northern goshawks (A. gentilis) red-shouldered hawks (Buteo lineatus), red-tailed hawks (B. jamaicensis), rough-legged hawsk (B. lagopus), and American kestrels (F. sparverius). Broad-winged hawk (B. platypterus) counts declined (P < 0.05) based on the route-regression method. Empirical comparisons of our results with those for well-studied species such as the peregrine falcon, bald eagle, and osprey indicated agreement with nesting surveys. We suggest that counts of migrant hawks are a useful and economical method for detecting long-term trends in species across regions, particularly for species that otherwise cannot be easily surveyed.

Pericyte-targeting drug delivery and tissue engineering

Directory of Open Access Journals (Sweden)

Kang E

2016-05-01

Full Text Available Eunah Kang,1 Jong Wook Shin2 1School of Chemical Engineering and Material Science, 2Division of Allergic and Pulmonary Medicine, Department of Internal Medicine, College of Medicine, Chung-Ang University, Dongjak-Gu, Seoul, South Korea Abstract: Pericytes are contractile mural cells that wrap around the endothelial cells of capillaries and venules. Depending on the triggers by cellular signals, pericytes have specific functionality in tumor microenvironments, properties of potent stem cells, and plasticity in cellular pathology. These features of pericytes can be activated for the promotion or reduction of angiogenesis. Frontier studies have exploited pericyte-targeting drug delivery, using pericyte-specific peptides, small molecules, and DNA in tumor therapy. Moreover, the communication between pericytes and endothelial cells has been applied to the induction of vessel neoformation in tissue engineering. Pericytes may prove to be a novel target for tumor therapy and tissue engineering. The present paper specifically reviews pericyte-specific drug delivery and tissue engineering, allowing insight into the emerging research targeting pericytes. Keywords: pericytes, pericyte-targeting drug delivery, tissue engineering, platelet-derived growth factor, angiogenesis, vascular remodeling

Containment PT Analysis in case of installation of PCCS using CAP Code

Energy Technology Data Exchange (ETDEWEB)

Choo, Yeon Jun; Hong, Soon Joon [Future and Challenge Technology Co., Yongin (Korea, Republic of); Kim, Gon Han; Cheon, Jong [Korea Electric Power Corporation Research Institute, Daejeon (Korea, Republic of)

2016-10-15

The goal of this project is developing of the conceptual design of containment passive cooling system, including PMCCS (Passive Molten Core Cooling System) and furthermore, applying to APR+ and iPOWER reactor finally. Advanced researches on PCCS were carried out by global nuclear industrial companies and the several types of reactor, such as AP1000, ESBWR and VVER, were introduced. Using the different way, these reactor types, however, are devised to mitigate the consequence of LOCA accident and remove the long-term decay heat. To confirm the reliability of PCCS function during an accident progress, experimental proofs and computational evaluations are vital. To evaluate the PCCS performance, CAP code simulation is preliminarily conducted on the ShinKori 3/4 DEDLSB accident. Two condensation models, Uchida and Dehbi's correlation, are tested for the condensation model applied on PCCS condensation tube outside surface. As compared with the existing spray system, it revealed the good performance in terms of containment pressure reduction. On the other hand, re-pressurization with the start of PCCT coolant temperature increment is observed also.

Convergencia hacia la economía regional líder en México. Un análisis de cointegración en panel

Directory of Open Access Journals (Sweden)

Jesús Díaz Pedroza

2009-01-01

Full Text Available El objetivo de este artículo es ofrecer evidencia empírica sobre la convergencia del PIB per capita de los estados de la República Mexicana hacia el PIB del Distrito Federal, al que consideramos como la economía líder (Barro y Sala-i-Martin; 1991, 1992. Para ello, se aplican dos pruebas de raíces unitarias y ocho de cointegración en panel (Im, Pesaran y Shin, 1997; Levin-Lin, 1993, Pedrioni, 2001; Larsson, 2001. Estas pruebas resuelven el problema de las distorsiones por el uso de muestras pequeñas, propias de las series de tiempo. Las pruebas de raíces unitarias muestran que no hay evidencia de convergencia absoluta de 1970 a 2004 y para otros dos subperiodos. Sin embargo, las pruebas de cointegración arrojan evidencia en favor de la convergencia condicional para el mismo periodo. Las estimaciones de la velocidad de convergencia (Mark y Sul, 2003 indican que las regiones más ricas convergen más rápidamente que las pobres.

Japanese Buddhism, Relativization, and Glocalization

Directory of Open Access Journals (Sweden)

Ugo Dessì

2017-01-01

Full Text Available Within the field of study on Japanese religions, the issue of globalization tends to be associated with the missionary activities of some successful new religious movements, and there is a certain reluctance to approach analytically the dynamics of glocalization/hybridization and the power issues at stake. In this article, I address these and other related problems by taking my cue from the relativizing effects of globalization and a working definition of religion based on the concept of authority. To this aim, I focus on two case studies. The first concerns the ongoing greening of Japanese Buddhism. The second revolves around the adoption of meditational techniques by priests and lay practitioners in Hawaiian Shin Buddhism. My findings show that there are at least four factors underlying the glocalization of Japanese Buddhism, that is, global consciousness, resonance with the local tradition, decontextualization, and quest for power. Moreover, they indicate that it is possible to distinguish between two types of glocalization (glocalization and chauvinistic glocalization and two configurations of glocalization (juxtaposition and integration.

LA PARIDAD DE PODER DE COMPRAEN MÉXICO (1930-1960

Directory of Open Access Journals (Sweden)

Frederick H. Wallace

2011-01-01

Full Text Available Empleamos una serie de datos no explotados anteriormente para calcular el tipo de cambio real respecto al dólar para México durante 1930.01-1960.12 a fin de probar la paridad de poder de compra (PPC. Los resultados iniciales de la prueba de Dickey-Fuller aumentada (DFA muestran un débil apoyo para la PPC. La prueba de Kapetanios, Shin, and Snell (KSS, con otra hipótesis de reversión no lineal a la media, muestra bastante apoyo para la PPC. Sin embargo, encontramos que los residuos de estas pruebas presentan no normalidad o heteroscedasticidad. Usando el enfoque de wild bootstrap, calculamos los valores críticos de la distribución empírica de los residuos y reevaluamos los estadísticos de prueba empleando estos nuevos valores críticos. Concluimos que hay evidencia de ajuste no lineal a la PPC para 1930.01-1951.12, pero esta evidencia no se mantiene durante 1952.01-1960.12, el periodo de sustitución de importaciones en México.

Some possible uses of radioisotopes in the rubber industry; Certaines possibilites d'emploi des radioisotopes dans l'industrie du caoutchouc; Nekotorye vozmozhnosti ispol'zovaniya radioaktivnykh izotopov v rezinovoj promyshlennosti; Algunas posibilidades de utilizacion de los radioisotopos en la industria del caucho

Energy Technology Data Exchange (ETDEWEB)

Shimorda, J; Mozhishek, M; Klimanek, L; Staroba, J [Nauchno-Issledovatel' skij Institut Tekhnologii Reziny i Plastmass (NIITRP), Gorod Gotval' dov, Chekhoslovatskaya Sotsialisticheskaya Respublika (Czech Republic)

1962-01-15

A method is described for using beta-emitters (Tl{sup 204} and S{sup 35}) for measuring the wearing qualities of motor-vehicle tyres, checking the homogeneity of tyre rubber, and non-contact thickness-gauging of rubberized fabrics. (author) [French] Le memoire expose une methode permettant d'employer des emetteurs beta ({sup 204}Tl et {sup 35}S) pour la mesure de la resistance des pneumatiques d'automobiles, le controle de l'uniformite du caoutchouc des pneus et la mesure sans contact de l'epaisseur des tissus caoutchoutes. (author) [Spanish] Los autores describen un metodo de utilizacion de emisores {beta} ({sup 204}Tl y {sup 35}S) para la medicion de la resistencia al desgaste de los neumaticos de automovil para la verificacion de la homogeneidad del caucho destinado a la fabricacion de neumaticos y para la medicion a distancia del espesor de las telas cauchutadas. (author) [Russian] Opisana metodika ispol'zovaniya beta-izluchatelej (Tl{sup 204} i S{sup 35}) dlya izmereniya velichiny iznosostojkosti avtomobil'nykh shin, dlya kontrolya gomogennosti shinnykh rezin i dlya beskontaktnogo izmereniya tolshchiny obrezinennykh tkanej. (author)

Assessment of CANDU-6 reactivity devices for DUPIC fuel

International Nuclear Information System (INIS)

Jeong, Chang Joon; Choi, Hang Bok

1998-11-01

Reactivity device characteristics for a CANDU 6 reactor loaded with DUPIC fuel have been assessed. The lattice parameters were generated by WIMS-AECL code and the core calculations were performed by RFSP code with a 3-dimensional full core model. The reactivity devices studied are the zone controller, adjusters, mechanical control absorber and shutoff rods. For the zone controller system, damping capability for spatial oscillation was investigated. For the adjusters, the restart capability was investigated. For the adjusters, the restart capability was investigated. The shin operation and power stepback calculation were also performed to confirm the compatibility of the current adjuster system. The mechanical control absorber was assessed for the function of compensating temperature reactivity feedback following a power reduction. And shutoff rods were also assessed to investigate the following a power reduction. And shutoff rods were also assessed to investigate the static reactivity worth. This study has shown that the current reactivity device system of CANDU-6 core with the DUPIC fuel. (author). 9 refs., 17 tabs., 7 figs

Demonstration test of electron beam flue gas treatment pilot plant of a coal fired thermal power station

International Nuclear Information System (INIS)

Doi, Yoshitaka; Hayashi, Kazuaki; Izutsu, Masahiro; Watanabe, Shigeharu; Namba, Hideki; Tokunaga, Okihiro; Hashimoto, Shoji; Tanaka, Tadashi; Ogura, Yoshimi.

1995-01-01

The Japan Atomic Energy Research Institute, Chubu Electric Power Company and Ebara Corporation jointly constructed a pilot plant for electron beam flue gas treatment (dry process) capable of treating 12,000 m 3 /h (NTP) of flue gas from a coal fired boiler, at Shin-Nagoya Thermal Power Station, Chubu Electric Power Company. Various tests carried out at the plant over a period extending one year verified the followings. By appropriately controlling parameters such as electron beam dosage, flue gas temperature, and ammonia stoichiometric amount, highly efficient simultaneous SO 2 and NOx removal from flue gas was achieved under all gas conditions, equal to or more efficient than that by the highest level conventional treatment. The operation of the pilot plant was stable and trouble-free over a long term, and the operation and the process was easy to operate and control. By-products (ammonium sulfate and ammonium nitrate) produced by the flue gas treatment were proven to have superior quality, equivalent to that of market-available nitrogen fertilizers. These by-products had been registered as by-product nitrogen fertilizers. (author)

Development of novel microsatellite markers for the Northern Goshawk (Accipiter gentilis) and their utility in cross-species amplification

Science.gov (United States)

Haughey, Christy; Sage, George K.; Degange, Gabriel; Sonsthagen, Sarah A.; Talbot, Sandra L.

2016-01-01

The Northern Goshawk (Accipiter gentilis) is a large forest raptor with a Holarctic distribution and, in some portions of its range, a species of conservation concern. To augment previously reported genetic markers, 13 novel polymorphic microsatellite markers were developed to establish individual identification and familial relationships, to assess levels of genetic diversity, and to identify diagnostic markers. Of the 22 loci tested, 13 were polymorphic, seven were monomorphic, and two failed to amplify. This suite of microsatellite loci yielded a combined probability of parental exclusion of 98%; a single individual sampled from a North American population can be reliably identified using a combination of seven of the 13 polymorphic loci. Cross-species screening in Cooper's Hawks (A. cooperii) and Sharp-shinned Hawks (A. striatus) of the 20 loci that successfully amplified in Northern Goshawks identified 13 loci as polymorphic in each species. Six of these loci (Age1303, Age1308, Age1309, Age1312, and Age1314) appeared to be useful in distinguishing between Accipiter species. These markers will be useful to researchers investigating populations of North American accipiters.

Association of vascular access flow with short-term and long-term mortality in chronic haemodialysis patients: a retrospective cohort study.

Science.gov (United States)

Wu, Chung-Kuan; Wu, Chia-Lin; Lin, Chia-Hsun; Leu, Jyh-Gang; Kor, Chew-Teng; Tarng, Der-Cherng

2017-09-24

To investigate the impact of vascular access flow (Qa) on vascular and all-cause mortality in chronic haemodialysis (HD) patients. Observational cohort study. Single centre. Adult chronic HD patients at the HD unit of Shin Kong Wu Ho-Su Memorial Hospital between 1 January 2003 and 31 December 2003 were recruited. Patients were excluded if they had arteriovenous fistula or arteriovenous graft failure within 3 months before the date of Qa measurement, were aged Short-term and long-term vascular (cardiovascular or cerebrovascular) and all-cause mortality. Qa was positively correlated with CI ( r =0.48, plong-term all-cause mortality (adjusted HR, 1.62; 95% CI 1.11 to 2.37; p=0.013); however, the risk of vascular mortality did not significantly increase after adjustment for confounders. Qa is moderately correlated with cardiac function, and a Qa level of short-term and long-term all-cause mortality in chronic HD patients. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Water Hammer Mitigation on Postulated Pipe Break of Feed Water System

International Nuclear Information System (INIS)

Seong, Ho Je; Woo, Kab Koo; Cho, Keon Taek

2008-01-01

The Feed Water (FW) system supplies feedwater from the deaerator storage tank to the Steam Generators(S/G) at the required pressure, temperature, flow rate, and water chemistry. The part of FW system, from the S/G to Main Steam Valve House just outside the containment building wall, is designed as safety grade because of its safety function. According to design code the safety related system shall be designed to protect against dynamic effects that may results from a pipe break on high energy lines such as FW system. And the FW system should be designed to minimize blowdown volume of S/G secondary side during the postulated pipe break. Also the FW system should be designed to prevent the initiation or to minimize the effects of water hammer transients which may be induced by the pipe break. This paper shows the results of the hydrodynamic loads induced by the pipe break and the optimized design parameters to mitigate water hammer loads of FW system for Shin-Kori Nuclear Power Plant Unit 3 and 4 (SKN 3 and 4)

Kuu kultuurikulgur

Index Scriptorium Estoniae

2008-01-01

Laivüritusest "Punk 2008" Tartus Athena klubis 11. septembril. Briti ansambel Klaxons 6. okt. Tallinnas klubis Hollywood. Moskva laulja Pelageja 5. okt. Tallinna linnahallis ja 7. okt. Jõhvi kontserdimajas. Heategevuskontserdist 14. sept. Tuhalaane kirikumäel (esinevad Tõnis Mägi, Robert Jürjendal, Ain Agan, Andre Maaker, Riho Sibul, Jaak Johanson, Jaak Tuksam jt). Kultuuritehase toetuseks korraldatud kontserdist "Polyymide päev" (esinesid rokkbändid Sõpruse Puiestee, Malena, Pure Mind ja Pilveke). Ooperi "Hullu mehe aias" lavastusest (lavastaja Robert Annus, koreograafia Triin Reemann, dirigent Veronika Portsmuth, lavakujundus ja kostüümide kunstnik Samal Blak Fääri saartelt) 10.-12. septembrini Tallinnas Kultuurikatlas. Kanada ansambli Simple Plan kontserdist 28. okt. Tallinnas klubis Rock Café. Üritustest Viljandi Pärimusmuusika Aidas: 6. sept. esinevad ansambel Paabel+, akordionist Kulno Malva ja DJ Harlet, etendus "Vaterland" 10. sept., Aida muusikud 11. sept., Anu Taul 13. sept. Fernando Stern ja Ethno in Transit 16. septembril. Gruusia ansambli Shin Egari kontsertidest 9. sept. Tartus Genialistide klubis, 10. sept. Estonia kontserdisaalis, 11. sept. Endla teatri küünis Pärnus, 12. sept. Kultuurivaras Kuressaares

Estimating site occupancy and detection probabilities for cooper's and sharp-shinned hawks in the Southern Sierra Nevada

Science.gov (United States)

Jennifer E. Carlson; Douglas D. Piirto; John J. Keane; Samantha J. Gill

2015-01-01

Long-term monitoring programs that can detect a population change over time can be useful for managers interested in assessing population trends in response to forest management activities for a particular species. Such long-term monitoring programs have been designed for the Northern Goshawk (Accipiter gentilis), but not for the more elusive Sharp...

Report on new energy vision establishment in Oga City area; Ogashi chiiki shin energy vision sakutei hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-02-01

A new energy vision was established in Oga City in Akita Prefecture. The population of the city is continuing the decreasing trend since 1955 to 30,462 persons as of 2000. The number of employed people by industry is in the trend of decreasing in the primary industry, leveling off in the second industry, and increasing in the tertiary industry. The annual energy demand in this city is 838,000 MWh in electric power and 302 times 10{sup 13} J, accounted for by the consumer department at about 44.4%, the transportation department at about 28.3% and the industrial department at 27.3%. The carbon dioxide emission amount therefrom is estimated 68,100 t-C. The expected usable quantity of new energies in the city would be available in solar heat as the largest source, followed by solar beam and wind power, whose amount is estimated 136.41 times 10{sup 13}J annually in total. The new energy introducing project includes introduction of wind power generation into Namahage Line and its vicinity and the Ikari area, manufacture of fuel from refuses, introduction of clean energy fueled automobiles into the cars used by the city office, introduction of photovoltaic into the general gymnasium and primary and middle schools, and solar heat utilization at the general gymnasium. (NEDO)

Plan to promote new energy introduction in Niigata Prefecture area; Niigataken chiiki shin energy donyu suishin keikaku

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

The 'Plan to promote new energy introduction in Niigata Prefecture area' was established to leave the conditions that everybody can live with affluence and comfort in the next generation. The plan lasts for ten years until 2010. Upon identifying the district characteristics of Niigata Prefecture, and based on the results of investigations on new energy existence quantity, utilization possibility thereof, and consciousness of residents of the prefecture, considerations were given that the plan shows the basic policy to promote proliferation of the new energies, and serves as the guideline for practical implementation. The plan document is composed of the following four items: 1) the foreword, 2) the current status of energies, 3) new energies expected of introduction, and 4) basic measures. The energy consumption was estimated to increase to 1.345 times that of fiscal 1990 in the year 2010, the increase being mainly in consumer and household use. The targeted quantity for new energy introduction was set to 90,000 kl annually as converted to petroleum. Expected new energy applications would include photovoltaic power generation, snow energy and solar heat utilization, and cogeneration utilizing natural gas. (NEDO)

NEDO Forum 2000. New energy and energy conservation introducing and proliferating project session (toward promotion of introducing new energies and energy conservation); Shin'ene shoene donyu fukyu jigyo session. Shin'ene shoene no donyu sokushin ni mukete

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-09-01

The following themes were presented at this session: (1) the history and roles of the NEDO's introduction and promotion projects, (2) expectation and prospects to introduction and promotion of new energy and energy conservation technologies, (3) energy innovation in houses and buildings actively using new energies and energy conservation means, (4) works on introducing new energies by using the private finance initiative (PFI), and (5) the last resort for energy conservation promoting measures in the industrial domain (high-performance industrial furnace technologies). In Item 3, design cases intended for sustainable buildings were introduced. In Item 4, the PFI is explained as a means to use as much fund and management know-how in private sectors as possible in improving the social capitals and providing high-quality public services. In Japan, the PFI promotion law was established in July 1999 (the law concerning promotion of improvements in public facilities by utilizing funds in private sectors). Introductions are given on the wide area wastes disposal project in Kimitsu Area, the PFI model project for power generation of everyday use at Kanamachi Water Purification Plant of the Tokyo Metropolitan Water Supply Bureau, and the Omuta RDF power generation project. In Item 5, descriptions are given on a new high-performance industrial furnace using the combustion mechanism of 'high-temperature air combustion' created from preheated air at temperatures higher than spontaneous combustion temperature. (NEDO)

Fiscal 2001 survey report on regional new energy vision formulation at Kyonan Town; 2001 nendo Kyonan machi shin energy vision sakutei chosa hokokusho. Chiiki shin energy vision sakutei tou jigyo (Watashitachi ga tsukuru machi, subete ga koen no machi)

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-03-01

A regional new energy vision was formulated at Kyonan Town, Chiba Prefecture, which includes a new energy introduction plan, an action program for the plan, and the like, intended to promote enlightenment/popularization relative to new energy and environmental matters. Kyonan Town consumes 18.69 times 10{sup 10} kcal of energy, with oil accounting for 65.4%, LPG for 6.0%, and electricity 28.6%, the statistics disclosing that the town has an oil-dependent energy consumption structure. The new energy likely to be introduced will comprise 13,574 times 10{sup 10} kcal/year in solar energy, 336,187 MWh/year in wind power, 17,170 kWh/year in small-scale hydroelectric power, 0.57 times 10{sup 10} kcal/year in refuse fueled power, and 0.60 times 10{sup 10} kcal/year in biomass fueled power. The town's new energy introduction project centers on photovoltaics, passive solar heat utilization, wind power, small-scale hydroelectric power, and aims to introduce the new energies into public facilities such as the Eco Garden and Katsuyama Primary School, and into kindergartens, nursery schools, shopping malls, and so forth. A plan was also worked out for adopting clean-energy vehicles for official use. (NEDO)

Museum of water, green and the sun - Marumori. New energy vision of the Marumori Town area; 2001 nendo Marumori machi shin energy vision hokokusho. Chiiki shin energy vision sakutei tou jigyo (Mizu to midori nto taiyo no hakubutsukan Marumori)

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-03-01

In Marumori Town, Miyagi Prefecture, a 'new energy vision of the area' was worked out which indicated the assessment of the energy reserved in the town and the course of new energy to be determined in the future. The energy consumption amount of Marumori Town in FY 1999 was estimated at 47,535 kL in crude oil conversion. By sector, the energy consumption amount was the largest in the order of the industrial sector, the transportation sector and the commercial/residential sector. The availability of new energy in Maruyama Town was estimated at approximately 480,585 GJ, of which the solar energy utilization was the largest, 53.1%. The photovoltaic power generation was the next largest, 25.4%, followed by the temperature difference energy (underground water), 8.9%, clean energy car, 7.8%, etc. As a plan for the first introduction of new energy, the following were studied: introduction of photovoltaic power generation facilities to the Marumori Town Office, introduction of new energy to public facilities around the Fudoson Park, introduction of wind power generation facilities to the town-run pasture, construction of the Marumori-type biogas plant, construction of a mini hydroelectric power plant, introduction of clean energy car to public vehicles, introduction of new energy facilities to the area of Kawa-no-Eki (station of the river), etc. (NEDO)

Electrolyte loss mechanism of molten carbonate fuel cells. 1; Yoyu tansan`engata nenryo denchi ni okeru denkaishitsu loss kiko ni tsuite. 1

Energy Technology Data Exchange (ETDEWEB)

Sonai, A; Murata, K [Toshiba Research and Development Center, Kawasaki (Japan)

1993-11-01

During a single-cell disassembly test of molten carbonate fuel cells having been operated for 90 hours to 5500 hours, correlativity was discovered between decrease in the retained amount of electrolyte due to decrease in pore capacity of electrodes and electrolyte plates and the electrolyte loss. The electrolyte loss amount cannot be explained with the conventional mechanisms, thereby a new model was proposed. The cathode has shown very little change in the capacity change in pores with diameters smaller than 2 {mu}m per unit area. The anode has remained almost constant after 1000 hours, but the electrolyte plates have shown remarkable decrease. Therefore, it is possible to estimate that the electrolyte plates should have been the major cause for the electrolyte loss. The result of measuring the electrolyte loss amount agreed well with that estimated using pore capacity curves. This fact suggests that the electrolyte loss can be explained by a new mechanism that hypothesizes the existence of a largest size of retaining pores that can support carbonates and defines that the electrolyte loss is generated from decrease in the pore capacity. 7 refs., 8 figs., 1 tab.

Hydraulic mechanism of siltation in approach channels and harbors. Siltation ni yoru koroter dot hakuchi maibotsu no suiri kiko ni kansuru kenkyu

Energy Technology Data Exchange (ETDEWEB)

Irie, I [Kyushu Univ., Fukuoka (Japan). Faculty of Engineering; Murakami, K; Tsuruya, H [Ministry of Transportation, Tokyo (Japan). Port and Harbour Research Inst.

1991-11-20

The phenomena that clay or mud is carried away by waves or currents and deposited in approach channels and harbors are called siltation, and hinder often seriously the navigation of vessels and their arrival at as well as departure from wharves, etc.. In this paper, the hydraulic mechanism of siltation in harbors and approach channels in the sea area is chozen in particular, and waves and currents as the external force governing the travel of bottom mud, the properties of sunken mud, the supply source of sunken mud in approach channels, and grasping of the mud sinking mechanism as well as countermeasures against mud sinking are stated mainly centering around the results obtained from the in situ observations at Kumamoto Port and Banjarmasin Port and their mathematical calculations. The bottom mud traveling mechanism has been accepted as a study subject respectively from such wide viewpoints as river engineering, agriculture, environmental engineering, sanitary engineering, chemical engineering and mechanical engineering, and in addition, it has been under study by coastal engineering. Siltation under the wave actions is still in the state of research even in advanced countries in America and Europe. The siltation research in Japan has a short history, but this is the field which must be coped with positively. 19 refs., 17 figs.

Radiografia intraoral e convencional da hemiarcada superior direita de gatos domésticos Intraoral and convencional radiography of the right maxilla hemiarcade of domestic cats

Directory of Open Access Journals (Sweden)

A.C. Nepomuceno

2013-02-01

Full Text Available A proposta com este trabalho foi avaliar a hemiarcada superior direita de gatos domésticos por meio de técnicas radiográficas odontológicas do paralelismo, empregando-se filmes intraorais aos posicionadores de Han Shin. As imagens obtidas por essa metodologia foram correlacionadas com as técnicas radiográficas convencionais (extraorais, com o intuito de se estabelecerem vantagens ou desvantagens para detectar possíveis afecções dentais e periodontais. Foram utilizados 30 gatos, sem raça definida, 17 machos e 13 fêmeas, faixa etária entre um e três anos, confinados em gatis do Departamento de Zootecnia da Universidade Federal de Lavras/MG. Com os animais sob anestesia geral, foram realizadas radiografias da hemiarcada superior direita, incluindo três incisivos, um canino, três pré-molares e um molar em radiografias intraorais e extraorais. As imagens radiográficas foram analisadas e efetuaram-se comparações qualitativas entre pares intraorais e convencionais dos mesmos animais. Para se estabelecer a técnica radiográfica dental mais bem adaptada, foram realizadas análises estatísticas pelo teste de McNemar (qui-quadrado modificado. A técnica intraoral mostrou ser superior à extraoral (PThe aim of this research was to evaluate the right maxilla hemiarcade of cats through parallel dental radiographic techniques, applying Han Shin intraoral film positioner. Images obtained with this method were correlated with conventional radiographic techniques (extraoral. The goal was to establish the advantages and disadvantages to detect possible dental and periodontal diseases. Thirty mixed breed cats were evaluated, 17 males and 13 females, ages one to three years old, confined in catteries in the Department of Zootecnia of the Federal University of Lavras/MG. Radiographies of the right maxilla were taken with the animals under general anesthesia, and three incisors, one canine, three premolars and one molar teeth were included in the

Intra-fraction motion of the prostate is a random walk

Science.gov (United States)

Ballhausen, H.; Li, M.; Hegemann, N.-S.; Ganswindt, U.; Belka, C.

2015-01-01

A random walk model for intra-fraction motion has been proposed, where at each step the prostate moves a small amount from its current position in a random direction. Online tracking data from perineal ultrasound is used to validate or reject this model against alternatives. Intra-fraction motion of a prostate was recorded by 4D ultrasound (Elekta Clarity system) during 84 fractions of external beam radiotherapy of six patients. In total, the center of the prostate was tracked for 8 h in intervals of 4 s. Maximum likelihood model parameters were fitted to the data. The null hypothesis of a random walk was tested with the Dickey-Fuller test. The null hypothesis of stationarity was tested by the Kwiatkowski-Phillips-Schmidt-Shin test. The increase of variance in prostate position over time and the variability in motility between fractions were analyzed. Intra-fraction motion of the prostate was best described as a stochastic process with an auto-correlation coefficient of ρ = 0.92  ±  0.13. The random walk hypothesis (ρ = 1) could not be rejected (p = 0.27). The static noise hypothesis (ρ = 0) was rejected (p test rejected the null hypothesis ρ = 1 in 25% to 32% of cases. On average, the Kwiatkowski-Phillips-Schmidt-Shin test rejected the null hypothesis ρ = 0 with a probability of 93% to 96%. The variance in prostate position increased linearly over time (r2 = 0.9  ±  0.1). Variance kept increasing and did not settle at a maximum as would be expected from a stationary process. There was substantial variability in motility between fractions and patients with maximum aberrations from isocenter ranging from 0.5 mm to over 10 mm in one patient alone. In conclusion, evidence strongly suggests that intra-fraction motion of the prostate is a random walk and neither static (like inter-fraction setup errors) nor stationary (like a cyclic motion such as breathing, for example). The prostate tends to drift away from the isocenter during a fraction, and

Laser-induced plasma spectroscopy (LIPS): use of a geological tool in assessing bone mineral content.

Science.gov (United States)

Andrássy, László; Gomez, Izabella; Horváth, Ágnes; Gulyás, Katalin; Pethö, Zsófia; Juhász, Balázs; Bhattoa, Harjit Pal; Szekanecz, Zoltan

2018-02-17

Bone may be similar to geological formulations in many ways. Therefore, it may be logical to apply laser-based geological techniques in bone research. The mineral and element oxide composition of bioapatite can be estimated by mathematical models. Laser-induced plasma spectrometry (LIPS) has long been used in geology. This method may provide a possibility to determine the composition and concentration of element oxides forming the inorganic part of bones. In this study, we wished to standardize the LIPS technique and use mathematical calculations and models in order to determine CaO distribution and bone homogeneity using bovine shin bone samples. We used polished slices of five bovine shin bones. A portable LIPS instrument using high-power Nd++YAG laser pulses has been developed (OpLab, Budapest). Analysis of CaO distribution was carried out in a 10 × 10 sampling matrix applying 300-μm sampling intervals. We assessed both cortical and trabecular bone areas. Regions of interest (ROI) were determined under microscope. CaO peaks were identified in the 200-500 nm wavelength range. A mathematical formula was used to calculate the element oxide composition (wt%) of inorganic bone. We also applied two accepted mathematical approaches, the Bartlett's test and frequency distribution curve-based analysis, to determine the homogeneity of CaO distribution in bones. We were able to standardize the LIPS technique for bone research. CaO concentrations in the cortical and trabecular regions of B1-5 bones were 33.11 ± 3.99% (range 24.02-40.43%) and 27.60 ± 7.44% (range 3.58-39.51%), respectively. CaO concentrations highly corresponded to those routinely determined by ICP-OES. We were able to graphically demonstrate CaO distribution in both 2D and 3D. We also determined possible interrelations between laser-induced craters and bone structure units, which may reflect the bone structure and may influence the heterogeneity of CaO distributions. By using two different

Prenatal development toxicity study of zinc oxide nanoparticles in rats

Directory of Open Access Journals (Sweden)

Hong JS

2014-12-01

Full Text Available Jeong-Sup Hong,1,2 Myeong-Kyu Park,1 Min-Seok Kim,1 Jeong-Hyeon Lim,1 Gil-Jong Park,1 Eun-Ho Maeng,1 Jae-Ho Shin,3 Meyoung-Kon Kim,4 Jayoung Jeong,5 Jin-A Park,2 Jong-Choon Kim,6 Ho-Chul Shin2 1Health Care Research Laboratory, Korea Testing and Research Institute, Gimpo, South Korea; 2College of Veterinary Medicine, Konkuk University, Seoul, South Korea; 3Department of Biomedical Laboratory Science, Eulji University, Seongnam-si, South Korea; 4Department of Biochemistry and Molecular Biology, Korea University Medical School and College, Seoul, South Korea; 5Toxicological Research Division, National Institute of Food and Drug Safety Evaluation, Chungcheongbuk-do, South Korea; 6College of Veterinary Medicine, Chonnam National University, Gwangju, South Korea Abstract: This study investigated the potential adverse effects of zinc oxide nanoparticles ([ZnOSM20(+ NPs] zinc oxide nanoparticles, positively charged, 20 nm on pregnant dams and embryo–fetal development after maternal exposure over the period of gestational days 5–19 with Sprague-Dawley rats. ZnOSM20(+ NPs were administered to pregnant rats by gavage at 0, 100, 200, and 400 mg/kg/day. All dams were subjected to a cesarean section on gestational day 20, and all of the fetuses were examined for external, visceral, and skeletal alterations. Toxicity in the dams manifested as significantly decreased body weight after administration of 400 mg/kg/day NPs; reduced food consumption after administration of 200 and 400 mg/kg/day NPs; and decreased liver weight and increased adrenal glands weight after administration of 400 mg/kg/day NPs. However, no treatment-related difference in: number of corpora lutea; number of implantation sites; implantation rate (%; resorption; dead fetuses; litter size; fetal deaths and placental weights; and sex ratio were observed between the groups. On the other hand, significant decreases between treatment groups and controls were seen for fetal weights after

Intra-fraction motion of the prostate is a random walk

International Nuclear Information System (INIS)

Ballhausen, H; Li, M; Hegemann, N-S; Ganswindt, U; Belka, C

2015-01-01

A random walk model for intra-fraction motion has been proposed, where at each step the prostate moves a small amount from its current position in a random direction. Online tracking data from perineal ultrasound is used to validate or reject this model against alternatives. Intra-fraction motion of a prostate was recorded by 4D ultrasound (Elekta Clarity system) during 84 fractions of external beam radiotherapy of six patients. In total, the center of the prostate was tracked for 8 h in intervals of 4 s. Maximum likelihood model parameters were fitted to the data. The null hypothesis of a random walk was tested with the Dickey–Fuller test. The null hypothesis of stationarity was tested by the Kwiatkowski–Phillips–Schmidt–Shin test. The increase of variance in prostate position over time and the variability in motility between fractions were analyzed. Intra-fraction motion of the prostate was best described as a stochastic process with an auto-correlation coefficient of ρ = 0.92  ±  0.13. The random walk hypothesis (ρ = 1) could not be rejected (p = 0.27). The static noise hypothesis (ρ = 0) was rejected (p < 0.001). The Dickey–Fuller test rejected the null hypothesis ρ = 1 in 25% to 32% of cases. On average, the Kwiatkowski–Phillips–Schmidt–Shin test rejected the null hypothesis ρ = 0 with a probability of 93% to 96%. The variance in prostate position increased linearly over time (r 2 = 0.9  ±  0.1). Variance kept increasing and did not settle at a maximum as would be expected from a stationary process. There was substantial variability in motility between fractions and patients with maximum aberrations from isocenter ranging from 0.5 mm to over 10 mm in one patient alone. In conclusion, evidence strongly suggests that intra-fraction motion of the prostate is a random walk and neither static (like inter-fraction setup errors) nor stationary (like a cyclic motion such as breathing, for example). The prostate tends to

Positive grid corrosion elongation analysis using CAE with corrosion deformation transformed into thermal phenomenon

Science.gov (United States)

Mukaitani, Ichiroh; Hayashi, Koji; Shimoura, Ichiro; Takemasa, Arihiko; Takahashi, Isamu; Tsubakino, Harushige

software " Solid Works" and computer aided engineering (CAE) software " ANSYS" with corrosion elongation transformed into thermal elongation. We established a current collector corrosion elongation forecast and found that the microstructure controlled the Pb-Ca-Sn alloy; thus newly designed VRLA batteries (MU-series [A. Takemasa, I. Mukaitani, Y. Yoshiyama, K. Fukui, T. Sakamoto, T. Kuwano, M. Fukuda, H. Misaki, K. Uwatari, Shin-Kobe Technical Report 9 (1999) 11] for telecommunication and LL-series [H. Takabayashi, T. Shibahara, Y. Mastuda, K. Fukui, S. Hazui, Y. Matsumura, S. Kondo, Shin-Kobe Tech. Rep. 11 (2001) 35] for electric energy storage) which are lightweight and have long life are introduced here.

Beneficial effects of prolonged blood pressure control after carotid artery stenting

Directory of Open Access Journals (Sweden)

Chang A

2017-01-01

Full Text Available Anna Chang,1 Huei-Fong Hung,2 Fang-I Hsieh,3 Wei-Hung Chen,1,4 Hsu-Ling Yeh,1,5 Jiann-Horng Yeh,1,6 Hou-Chang Chiu,1,6 Li-Ming Lien1,4 1Department of Neurology, Shin Kong Wu Ho-Su Memorial Hospital, Taipei, 2Department of Cardiology, Shin Kong Wu Ho-Su Memorial Hospital, Taipei, 3School of Public Health, College of Public Health, Taipei Medical University, Taipei, 4School of Medicine, College of Medicine, Taipei Medical University, Taipei, 5Institute of Public Health, National Yang-Ming University, Taipei, 6School of Medicine, College of Medicine, Fu Jen Catholic University, Taipei, Taiwan Objectives: The main purpose of this study was to investigate whether carotid artery stenting (CAS plus medicine in patients with severe carotid artery stenosis provide a better long-term blood pressure (BP control compared to other medical treatments alone. The other aim was to explore the correlation between post-CAS hypotension within 6 h and long-term BP reductions after CAS. Materials and methods: Patients with severe carotid stenosis were recruited either in the CAS group or in the medication group. BPs and the number of classes of antihypertensive agents were recorded at baseline, 6, and 12 months. Extra BP information was collected at 6 h, 3 days, and 1 month after CAS. Univariate and multivariate linear regressions were performed to test the relationship of BP changes among CAS and medication groups after 6 and 12 months of follow-up. Univariate linear regressions were also used to determine the correlations between the mean or maximal systolic BP (SBP reductions at 6 h and 1 year post-CAS. Results: In total, 72 members in the CAS group and 82 members in the medication group were recruited. Compared with the medication group, patients in the CAS group had greater BP reductions at 6 and 12 months of follow-up after adjusting for confounding factors (13.56 mmHg at 6 months, P=0.0002; 16.98 mmHg at 12 months, P<0.0001. This study also shows significant

Fiscal 2000 achievement report. Development of energy use rationalization-oriented silicon manufacturing process (Survey and study of analysis of commercialization of solar-grade silicon material manufacturing technology); 2000 nendo shin energy sangyo gijutsu sogo kaihatsu kiko kyodo kenkyu gyomu seika hokokusho. Energy shiyo gorika silicon seizo process kaihatsu (Taiyodenchiyou silicon genryo seizo gijutsu no jitsuyoka kaiseki ni kansuru chosa kenkyu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

The trend of technology development, problems harbored therein, trend of the market, and the like were investigated for supporting the development of technologies for the mass production and commercialization of solar-grade silicon materials. Concerning the future of production enhancement and cost reduction in the manufacture of polycrystalline silicon solar cells, studies were made from the technological viewpoint. The results are shown below. It is estimated that approximately 4,500 tons of material silicon will be necessary in 2005 and 6,500-10,700 tons in 2010. Since the melting purification method of NEDO (New Energy and Industrial Technology Development Organization) now under development step by step toward commercialization as well as the conventional source will provide the necessary amount of material silicon, it is inferred that the development of solar cells will go on without any restraint originating in the semiconductor industry. With the commercialization of the technologies so far developed and the development/commercialization of the fast-acting high-performance solar cell technology, probabilities are high that the polycrystalline silicon solar cell manufacturing cost in 2010 will be as low as to be on the 100 yen/W (93-118 yen/W) level which is the level now held up as the goal. (NEDO)

Fiscal 1999 edition. Guidebook for introducing new energies in Kinki District; Kinki chiiki shin energy donyu guide book

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-09-01

The captioned guidebook is composed of the following subjects: (1) the current status and problems of new energies (the energy status and the current status of new energies in Japan, and approaches to new energies in Japan); (2) the status of introduction and works in Kinki District (the outline of introduction and works in Kinki District on photovoltaic electric power generation, solar heat utilization, wind power generation, wastes power generation, clean energy fueled automobiles, cogeneration, fuel cells, unused energies, and other reproducible energies); (3) NEDO related supportive institutions (new energy introduction promotion projects by NEDO, and the outline of different supportive institutions); (4) new energy introduction flow (total flow leading to the introduction, and introduction flow by new energies); (5) the grand new energy prize in Kinki District (what is the grand new energy prize? and cases of prizes awarded in Kinki District); (6) new energy related supportive institutions (a list of the related institutions, and the outline of different supportive institutions); and (7) new energy consultation windows and contacts (consultation windows and contacts for general new energy aspects and the government related supportive institutions, and consultation windows by new energies). The grand new energy prize is awarded by New Energy Foundation as the 'institution for public recognition of new energy devices of the 21st century type'. (NEDO)

Report on establishment of new energy vision in Akeno Village (Yamanashi Prefecture); Akenomura shin energy vision sakutei hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-02-01

A new energy vision was established to move positively forward the introduction of reproducible new energies and promotion of energy conservation at the district level, based on the basic conception of 'protecting and nurturing nature and culture of Akeno Village to leave them to the future generations'. The activity achievements were put into order by the following five items: 1) basic conception and basic policy in establishing the new energy vision, 2) the general situation of Akeno Village, 3) investigation on energy demand and supply in Akeno Village, 4) estimation of existence quantity of new energies, and 5) the new energy introduction vision. Item 5 is composed of the conception in establishing the idea, new energy introduction plans, and new energy introduction projects. The new energy introduction projects include introduction of photovoltaic power generation into Akeno Middle School, installation of wind power generation facilities at open space in the 'Road Station', introduction of hybrid street lights using micro wind mills and solar cells into the school zone roads, and introduction of clean energy fueled automobiles into official use automobiles. (NEDO)

Report on new energy vision at Hinase Town area; 2001 nendo Hinase cho chiiki shin energy vision hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-03-01

With an objective of accelerating introduction of and uplifting consciousness on new energies at Hinase Town in Hyogo Prefecture, investigations and discussions were given on the energy demand, quantity of new energies available, and the new energy introduction projects for the town, thus a new energy vision was established. The estimated amount of energy consumption in Hinase Town is 242,814,320,000 kcal in fiscal 2000. The amount of carbon dioxide discharge associated therewith is 76.57 t-CO2/year. Regarding the energy consumption by departments, the industrial department consumes the most, followed by the transportation department, civil household department, and civil business department. The new energy introduction projects have discussed servicing of the bio-gas plant utilizing organic wastes and cogeneration, the new energy introduction projects for the Natural Energy Island at Kakui Island and the ocean ranch consisted of the use of solar heat water warmer, solar cell powered street lights, photovoltaic power generation, and electric cars for sightseeing visitors, the Eco-school promotion project for primary schools, introduction of energy saving devices into the town office, and the new energy proliferation and enlightenment project. (NEDO)

Report of regional new energy vision for Kannami Town; 2001 nendo Kannami cho chiiki shin energy vision hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-03-01

For promoting the introduction of new energy and for enhancing people's consciousness of such at Kannami Town, Shizuoka Prefecture, surveys and studies were conducted involving the energy consumption structure of the town, the amount of new energy resources in existence, and new energy introduction projects, and a vision was formulated. The town consumes approximately 5-million GJ/year, with the industrial sector consuming 47%, the transportation sector 29%, and the residential and commercial sector 26%. When a comparison is made, the percentages of the residential/commercial and transportation sectors are relatively higher than the national average. Projects for new energy introduction were studied, which involved photovoltaic power generation for the town office, community hall, primary and junior high schools, nursery schools, and general residences; solar heat utilization for public facilities, greenhouses, and general residences; wind power generation for sightseeing facilities, public gardens, and emergency evaluation areas; utilization of sewage waste heat for the sewage purification center; utilization of hot spa waste heat in the urban area; a biomass-fueled power plant; medium- and mini-scale hydroelectric power generation for the drinking water treatment plant; refuse-fueled power generation at refuse incineration facilities; use of clean-energy automobiles; natural gas-fueled cogeneration for public organizations; and so forth. (NEDO)

Fiscal 1999 edition. Guidebook for introducing new energies in Kinki District; Kinki chiiki shin energy donyu guide book

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-09-01

The captioned guidebook is composed of the following subjects: (1) the current status and problems of new energies (the energy status and the current status of new energies in Japan, and approaches to new energies in Japan); (2) the status of introduction and works in Kinki District (the outline of introduction and works in Kinki District on photovoltaic electric power generation, solar heat utilization, wind power generation, wastes power generation, clean energy fueled automobiles, cogeneration, fuel cells, unused energies, and other reproducible energies); (3) NEDO related supportive institutions (new energy introduction promotion projects by NEDO, and the outline of different supportive institutions); (4) new energy introduction flow (total flow leading to the introduction, and introduction flow by new energies); (5) the grand new energy prize in Kinki District (what is the grand new energy prize? and cases of prizes awarded in Kinki District); (6) new energy related supportive institutions (a list of the related institutions, and the outline of different supportive institutions); and (7) new energy consultation windows and contacts (consultation windows and contacts for general new energy aspects and the government related supportive institutions, and consultation windows by new energies). The grand new energy prize is awarded by New Energy Foundation as the 'institution for public recognition of new energy devices of the 21st century type'. (NEDO)

New energy visions for City of Sapporo. Report on the survey results; Sapporoshi shin energy vision chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-02-01

This project is aimed at survey/study on new energy reserves and possibility of their introduction for City of Sapporo, and, at the same time, drawing the future visions for introduction of new energies to reshape the city. The new energies considered are solar energy and waste heat carried by sewage, in addition to waste heat from garbage incineration and garbage-derived solid fuels, which are now already utilized as the heat sources for district heat supply. The city as a whole consumed energy of 28,100Tcal/y in 1985 and 45,700Tcal/y in 1996, and emitted carbon dioxide totaling 2,690,000 and 3,510,000 tC/y in the respective year. The projects considered for introduction of new energies include construction of a new cleaning plant and heat supply system at the southern gate of Sapporo Station, introduction of clean energy automobiles, increasing attractiveness of Satoland project, utilization of low-temperature heat at glass pyramids in Moere Park, promotion of photovoltaic power generation, construction of facilities for culture-exchanging, and construction of an environmental plaza. (NEDO)

Basic research report on introduction of new energy into Yamaguchi Prefecture; Yamaguchiken shin energy donyu kiso chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

In Estimation Work 1, the potentially available amount (the amount in existence) is determined for each type of new energy by use of various new energy related technologies now available. In Estimation Work 2, the available amount is determined for each type of new energy, with social restraint and installation space taken into consideration. Effects upon energy saving and CO2 emission reduction are 4405.2% and 3439.1% in Estimation Work 1, and 6.5% and 8.0% in Estimation Work 2. A conclusion is reached after examining the outcomes of the said estimation works and the results of simulations (conducted on the assumption of new energy introduction in fiscal 2010), the number of advocates expressing their support of new energy adoption in questionnaires answered by various businesses and offices in the prefecture, high possibilities of introduction detected in a survey of exploitation projects of cities, towns, associations, and unions, and the prospect of acceptance by households. The conclusion is that the types of new energy and technologies to be selectively introduced into the prefecture will be photovoltaic power generation, wind power generation, clean energy vehicles, energy extracted from wastes, cogeneration, fuel cells, passive solar system, utilization of waste heat from factories and mills, and ocean energy. These are abundant in terms of potentially available amount and of available amount. (NEDO)

Development and preliminary evaluation of a new anatomically based prosthetic alignment method for below-knee prosthesis.

Science.gov (United States)

Tafti, Nahid; Karimlou, Masoud; Mardani, Mohammad Ali; Jafarpisheh, Amir Salar; Aminian, Gholam Reza; Safari, Reza

2018-04-20

The objectives of current study were to a) assess similarities and relationships between anatomical landmark-based angles and distances of lower limbs in unilateral transtibial amputees and b) develop and evaluate a new anatomically based static prosthetic alignment method. First sub-study assessed the anthropometrical differences and relationships between the lower limbs in the photographs taken from amputees. Data were analysed via paired t-test and regression analysis. Results show no significant differences in frontal and transverse planes. In the sagittal plane, the anthropometric parameters of the amputated limb were significantly correlated to the corresponding variables of the sound limb. The results served as bases for the development of a new prosthetic alignment method. The method was evaluated on a single subject study. Prosthetic alignment carried out by an experienced prosthetist was compared with such alignment adjusted by an inexperienced prosthetist but with the use of the developed method. In sagittal and frontal planes, the socket angle was tuned with respect to the shin angle, and the position of the prosthetic foot was tuned in relation to the pelvic landmarks. Further study is needed to assess the proposed method on a larger sample of amputees and prosthetists.

Gyrodiniellum shiwhaense n. gen., n. sp., A New Planktonic Heterotrophic Dinoflagellate from the Coastal Waters of Western Korea 

DEFF Research Database (Denmark)

Kang, Nam Seon; Jeong, Hae Jin; Moestrup, O.

2011-01-01

The heterotrophic dinoflagellate Gyrodiniellum shiwhaense n. gen., n. sp. is described from live cells and from cells prepared for light, scanning electron, and transmission electron microscopy. Also, sequences of the small subunit (SSU) and large subunit (LSU) of rDNA have been analyzed. The epi......The heterotrophic dinoflagellate Gyrodiniellum shiwhaense n. gen., n. sp. is described from live cells and from cells prepared for light, scanning electron, and transmission electron microscopy. Also, sequences of the small subunit (SSU) and large subunit (LSU) of rDNA have been analyzed.......3-0.5 x cell length. Cells that were feeding on the dinoflagellate Amphidinium carterae Hulburt were 9.1-21.6 mu m long and 6.6-15.7 mu m wide. Cells of G. shiwhaense contain nematocysts, trichocysts, a peduncle, and pusule systems, but they lack chloroplasts. The SSU rDNA sequence is > 3% different from......., cells of which possess a taeniocyst-nematocyst complex, G. shiwhaense has nematocysts but lacks taeniocysts. It differs from Paragymnodinium shiwhaense Kang, Jeong, Moestrup & Shin by possessing nematocysts with stylets and filaments. Gyrodiniellum shiwhaense n. gen., n. sp. furthermore lacks ocelloids...

Prevalence of encysted apicomplexans in muscles of raptors.

Science.gov (United States)

Lindsay, D S; Blagburn, B L

1999-01-28

An acid-pepsin digestion technique was used to examine portions of breast muscle and heart from raptors for encysted protozoans. Apicomplexan zoites were present in 52 (45.6%) of the 114 samples examined: 11 of 12 (91.7%) red-shouldered hawks (Buteo lineatus), 20 of 34 (58.8%) red-tailed hawks (Buteo jamaicensis), two of seven (28.6%) Cooper's hawks (Accipiter cooperi), three of four (75%) sharp-shinned hawks (Accipiter striatus), one (100%) Mississippi kites (Ictinia misisippiensis), one of two (50%) American kestrels (Falco sparverius), one bald eagle (Haliaeetus leucocephalus), one of two (50%) golden eagles (Aquila chrysaetos), one of three (33%) turkey vultures (Cathartes aura), two of three (66.7%) black vultures (Coragyps atratus), three of six (50%) great-horned owls (Bubo virginianus), five of 15 (33.3%) barred owls (Strix varia), and one of 12 (8.3%) screech owls (Asio otus). Encysted protozoans were not observed in digests of tissues from three broad-winged hawks (Buteo platypterus), four ospreys (Pandion haliaetus), and five barn owls (Tyto alba). Apicomplexan cysts resembling Sarcocystis species were observed in tissue sections of muscles from 28 (37.8%) of 74 raptors.

Extended Station Blackout Analyses of an APR1400 with MARS-KS

International Nuclear Information System (INIS)

Kim, WoongBae; Jang, HyungWook; Oh, Seungjong; Lee, Sangyong

2016-01-01

The Fukushima Dai-ichi nuclear power plant accident shows that natural disasters such as earthquakes and the subsequent tsunamis can cause station blackout for several days. The electricity required for essential systems during a station blackout is provided from the emergency backup batteries installed at the nuclear power plant. In South Korea, in the event of an extended station blackout, the life of these emergency backup batteries has recently been extended from 8 hours to 24 hours at Shin-Kori 5, 6 and APR1400 for design certification. For a battery life of 24 hours, available safety means system, equipment and procedures are studied and analyzed in their ability to cope with an extended station blackout. A sensitivity study of reactor coolant pump seal leakage is performed to verify how different seal leakages could affect the system. For simulating of extended station blackout scenarios, the best estimate MARS-KS was used. In this paper, an APR1400 RELAP5 input deck was developed for station blackout scenario to analyze operation strategy by manually depressurizing the reactor coolant system through the steam generator's secondary side. Additionally, a sensitivity study was performed on reactor coolant pump seal leakage

Achievement report for fiscal 1999 (edition B) on auxiliary New Sunshine Project. Development of coal hydrogasification technology (Research by using experimental device); 1999 nendo New Sunshine keikaku hojo jigyo seika hokokusho (B ban). Sekitan suiso tenka gaska gijutsu kaihatsu - Jikken sochi ni yoru kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

With an objective of using practically the coal hydrogasification technology (the ARCH process), developmental research has been performed on important elementary technologies using different experimental devices. This paper summarizes the achievements in fiscal 1999. In the research by using a small testing apparatus, the Taiheiyo coal was used to have performed demonstration operation on the replacement natural maximized case, the heat efficiency maximized case, and the BTX maximized case. As a result, the three cases were found nearly as anticipated in the simulation, whereas the replacement natural gas maximized case has achieved the targeted whole coal conversion rate of 60% or more. However, the BTX maximized case presented a value lower than the targeted BTX yield of 12%. In the developmental research on the injector, the injector having been fabricated for the hot model test was given another combustion test, where the focal temperature of 1,200 degree C or higher was derived. The hot model test has verified the non-agglomeration performance of coal by using as parameters the focal temperatures, coal cross sectional area loads, coal types, and injectors. It was verified that the Taiheiyo and Shin Mu coals do not agglomerate excessively. (NEDO)

The Service Life Evaluation for Concrete Structure of NPP

International Nuclear Information System (INIS)

Lee, Choon Min; Kim, Seong Soo; Bae, Sung Hwan; Sik, Yoon Eui

2014-01-01

Prolonged exposure to the marine environment degrades the durability of concrete and shortens the service life of concrete due to degradation factors such as chloride, carbonation, freezing and thawing, sulfate. Therefore, many country's organizations like the Korea Concrete Institute (KCI), the American Concrete Institute (ACI), the International Federation for Structural Concrete (FIB), the American Society for Testing and Material (ASTM) which recognized the seriousness of this deterioration proposed equation models to evaluate the service life for the concrete structures. As a result, this paper is to especially consider the service life evaluation using these equation models for concrete structure of NPP in Korea compared with 60 years as a design service life. The concrete durability evaluation for Shin-Hanul NPP units 1 and 2 is carried out by using typically proposed assessment models in domestic and foreign standard. It is confirmed that the service life of concrete durability for each of deterioration factors is significantly higher than 60 years as a design service life. As a result, the study of combined deterioration for the concrete structures of NPP in future is positively necessary and maintenance control through regular monitoring should be conducted to secure safety margin basis

A comparative approach to predicting effective dielectric, piezoelectric and elastic properties of PZT/PVDF composites

International Nuclear Information System (INIS)

Ahmad, Zeeshan; Prasad, Ashutosh; Prasad, K.

2009-01-01

The present study addresses the problem of quantitative prediction of effective relative permittivity, dielectric loss factor, piezoelectric charge coefficient, and Young's modulus of PZT/PVDF diphasic ceramic-polymer composite as a function of volume fraction of PZT in the different compositions. Theoretical results for effective relative permittivity derived from several dielectric mixture equations like those of Knott, Rother-Lichtenecker, Bruggeman, Maxwell-Wagner-Webmann-Skipetrov or Dias-Dasgupta, Furukawa, Lewin, Wiener, Jayasundere-Smith, Modified Cule-Torquato, Taylor, Poon-Shin and Rao et al. were fitted to the experimental data taken from previous works of Yamada et al. Similarly, the results for effective piezoelectric coefficient and Young's modulus, derived from different appropriate equations were fitted to the corresponding experimental data taken from the literature. The study revealed that only a few equations like modified Rother-Lichtenecker equation, Dias-Dasgupta equation and Rao equation for dielectric and piezoelectric properties while the four new equations developed in the present study of elastic property (Young's modulus) well fitted the corresponding experimental results. Further, the acceptable data put to various regression analyses showed that in most of the cases the third order polynomial regression analysis provided more acceptable fits.

Case Report: Multiple Myeloma with Gangrene of Extremities

Directory of Open Access Journals (Sweden)

N Gharahi

2009-07-01

Full Text Available Introduction: Multiple myeloma represents a malignant proliferation of plasma cells derived from a single clone and it results in bone pain or fracture, renal failure, susceptibility to infections, anemia and hypercalcemia. The hyper viscosity syndrome is rare. Cryoglobulins are immunoglubulins that precipitate at temperatures less than 37degrees Celsius. Monoclonal cryoglobulins are usually present along with a specific hematologic disorder and are often asymptomatic. We report a second case of multiple myeloma with gangrene of all four extremities. Case: The Patient was a 77 year–old farmer with a 2 weeks history of coldness, pain and discoloration of the fingers of both the extremities which had extended to the mid forearm and shin regions. It was accompanied by skin erosions of the lower extremities, dark spots on the ear auricles and discoloration of the tip of the nose. On physical examination, quadrigangrene associated with ischemia of the auricles and tip of nose was seen. Serum proteins electrophoresis demonstrated monoclonal gammopathy and serum was positive for cryoglobulin, Bone marrow study showed neoplastic plasma cells infiltration. The patient was diagnosed as cryoglobulinemia based on multiple myeloma and treated accordingly.

Unavailability Analysis of the Reactor Core Protection System using Reliability Block Diagram

International Nuclear Information System (INIS)

Shin, Hyun Kook; Kim, Sung Ho; Choi, Woong Suk; Kim, Jae Hack

2006-01-01

The reactor core of nuclear power plants needs to be monitored for the early detection of core abnormal conditions to protect plants from a severe accident. The core protection calculator system (CPCS) has been provided to calculate the departure from nucleate boiling ratio (DNBR) and the local power density (LPD) based on measured parameters of reactor and coolant system. The original CPCS for OPR 1000 has been designed and implemented based on the concurrent 3205 computer system whose components are obsolete. The CPCS based on Westinghouse Common-Q system has recently been implemented for the Shin-Kori Nuclear Power Plant, Units 1 and 2(SKN 1 and 2). An R and D project has been launched to develop new core protection system called as RCOPS (Reactor Core Protection System) with the partnership of KOPEC and Doosan Heavy Industries and Construction Co. RCOPS is implemented on the HFC-6000 safety class programmable logic controller (PLC). In this paper, the reliability of RCOPS is analyzed using the reliability block diagram (RBD) method. The calculated results are compared with that of the CPCS for SKN 1 and 2

Design of Hemispherical Downward-Facing Vessel for Critical Heat Flux Experiment

International Nuclear Information System (INIS)

Hwang, J. S.; Suh, K. Y.

2009-01-01

The in-vessel retention (IVR) is one of major severe accident management strategies adopted by some operating nuclear power plants during a severe accident. The recent Shin-Gori Units 3 and 4 of the Advanced Power Reactor 1400 MWe (APR1400) have adopted the external reactor vessel cooling (ERVC) by reactor cavity flooding as major severe accident management strategy. The ERVC in the APR1400 design resorts to active flooding system using thermal insulator. The Corium Attack Stopper Apparatus Spherical Channel (CASA SC) tests are conducted to measure the critical power and critical heat flux (CHF) on a downward hemispherical vessel scaled down from the APR1400 lower head by 1/10 on a linear scale. CASA is designed through scaling and thermal analysis to simulate the APR1400 vessel and thermal insulator. The heated vessel of CASA SC represents the external surface of a hemisphere submerged vessel in water. The heated vessel plays an important role in the ERVC experiment depending on the configuration of oxide pool and metallic layer. Hand calculation and computational analysis are performed to produce high heat flux from the downward facing hemisphere in excess of 1 MW/m 2

The Development of CPSES Plug-in(CPMP) for APR1400 Computerized Procedure Effective Maintenance

Energy Technology Data Exchange (ETDEWEB)

Seong, No Kyu; Park, Jin Kyun; Jung, Yeon Sub [KHNP Central Research Institute, Daejeon (Korea, Republic of)

2014-10-15

The Computerized Procedure System (CPS) is one of the Man Machine Interface (MMI) resources of the Shin-Kori 3 and 4 nuclear power plants. The CPS is a computerized operator support system that enables operating crew to execute procedures in an accurate and fast manner. The Computerized Procedure (CP) is the XML data file in executable format that can be installed in the Procedure eXecution System (PXS) for execution. The CP contains specific information related to a particular procedure (i.e. LOCA). These computerized procedures such as Alarm Response Procedures (ARP) are separated into individual alarm procedure to maximize function interface between CPS and DCS. E.g. 'Procedure open by alarm list'. The procedure writer's burden to manage many procedures has been increased because of separated procedures. This paper introduces Computerized Procedure System Engineering System (CPSES) plug-in that is computerized procedure management program (CPMP) to reduce procedure writer's burden. This paper introduces the main features of CPMP. CPMP reduces procedure writer's or CPX maintainer's burden. This program is implemented and tested by program design requirement.

CO/sub 2/ emission and agricultural productivity in southeast asian region: a pooled mean group estimation

International Nuclear Information System (INIS)

Islam, M.; Kazi, M.

2014-01-01

Frequent natural calamities, extreme climatic events and unexpected seasonal changes are the obvious examples of global warming. Carbon emissions by industrial units all over the world are believed to be the major contributor of the global warming that can lead to reduced agricultural productivity. This paper examines the impact of CO emission on agricultural productivity in Southeast Asian countries. It investigates the dynamic relationship between CO emission (along with other control-variables) and agricultural output using panel data set comprising data from Southeast Asian countries. Following the dynamic heterogeneous panel techniques developed by Pesaran and Shin (1999) for estimating the short- run and long-run effects using autoregressive distributed lag (ARDL) model in the error correction form, the study then estimated the empirical model based on pooled mean group (PMG) estimator. The study found that increased CO emission resulted in higher agricultural productivity because of the fact that farmers around the globe quickly adapt to climate change. In addition, use of submersible pump and other capital machineries significantly increased agricultural yield and led to reduced dependency on human capital, while use of chemical fertilizers increased productivity in short-run but had a harmful impact in the long-run. (author)

Anatomical variations within the deep posterior compartment of the leg and important clinical consequences.

Science.gov (United States)

Hislop, M; Tierney, P

2004-09-01

The management of musculoskeletal conditions makes up a large part of a sports medicine practitioner's practice. A thorough knowledge of anatomy is an essential component of the armament necessary to decipher the large number of potential conditions that may confront these practitioners. To cloud the issue further, anatomical variations may be present, such as supernumerary muscles, thickened fascial bands or variant courses of nerves and blood vessels, which can themselves manifest as acute or chronic conditions that lead to significant morbidity or limitation of activity. There are a number of contentious areas within the literature surrounding the anatomy of the leg, particularly involving the deep posterior compartment. Conditions such as chronic exertional compartment syndrome, tibial periostitis (shin splints), peripheral nerve entrapment and tarsal tunnel syndrome may all be affected by subtle anatomical variations. This paper primarily focuses on the deep posterior compartment of the leg and uses the gross dissection of cadaveric specimens to describe definitively the anatomy of the deep posterior compartment. Variant fascial attachments of flexor digitorum longus are documented and potential clinical sequelae such as chronic exertional compartment syndrome and tarsal tunnel syndrome are discussed.

Technique of the biomechanical analysis of execution of upward jump piked

Directory of Open Access Journals (Sweden)

Nataliya Batieieva

2016-12-01

Full Text Available Purpose: the biomechanical analysis of execution of upward jump piked. Material & Methods: the following methods of the research were used: theoretical analysis and synthesis of data of special scientific and methodical literature; photographing, video filming, biomechanical computer analysis, pedagogical observation. Students (n=8 of the chair of national choreography of the department of choreographic art of Kiev national university of culture and art took part in carrying out the biomechanical analysis of execution of upward jump piked. Results: the biomechanical analysis of execution of upward jump piked is carried out, the kinematic characteristics (way, speed, acceleration, effort of the general center of weight (GCW and center of weight (CW of biolinks of body of the executor are received (feet, shins, hips, shoulder, forearm, hands. Biokinematic models (phases are constructed. Power characteristics are defined – mechanical work and kinetic energy of links of legs and hands at execution of upward jump piked. Conclusions: it is established that the technique of execution of upward jump piked considerably influences the level of technical training of the qualified sportsmen in gymnastics (sports, in aerobic gymnastics (aerobics, diving and dancing sports.

The Effects of the Hominis Placenta Herbal acupuncture on Sleep pattern disturbance

Directory of Open Access Journals (Sweden)

Youn Hyoun-min

2005-02-01

Full Text Available Objective : This study has been designed and performed to identify the effects of Hominis Placenta herbal acupuncture which is usually used in reducing sleep pattern disturbances. Methods : The study subjects studied included 48 patients who were admitted in hospital located in Pusan, and they were classified into 2 groups : 25 patients in the experimental group who injected Hominis Placenta herbal acupuncture and 23 patients in the control group who were treated by acupuncture. The both group injected on GB20, GB12 and HT7 for 5 days without medicine. The sleep pattern disturbance score was measured by using 15 questions according to Korean Sleep Scale A(Oh, Jin Joo. Song, Mi Soon. Kim, Shin Mi. 1998. Results & conclusions : The sleep pattern disturbance score of the experimental group who injected Hominis Placenta herbal acupuncture was significantly lower than that of the control group. (t= 7.00 p= .00 These results provided that Hominis Placenta herbal acupuncture of GB20, GB12 and HT7 was effective for relieving sleep pattern disturbances, it is need more sample's number and more treatmentt's duration.

Increase in interleukin-6 immediately after wheelchair basketball games in persons with spinal cord injury: preliminary report.

Science.gov (United States)

Kinoshita, T; Nakamura, T; Umemoto, Y; Kojima, D; Moriki, T; Mitsui, T; Goto, M; Ishida, Y; Tajima, F

2013-06-01

Case series. To investigate the effects of wheelchair basketball game on plasma interleukin-6 (IL-6), tumor necrosis factor-α (TNF-α), C-reactive protein (CRP) and blood cell counts in persons with spinal cord injury (SCI). The 2009 Mei-shin League of Wheelchair Basketball Games held at Wakayama, Japan. Five wheelchair basketball players with SCI voluntarily participated in this study. Blood samples were taken approximately 1 h before the player warm-up for the game and immediately after the game. IL-6, TNF-α, CRP and blood cell count were measured. Plasma IL-6 level and number of monocytes were significantly increased after the game, compared with pre-game measurements (P<0.05). No changes were observed in other measurements. There was a significant relationship between increased IL-6 levels and accumulated play duration. The lack of change in TNF-α and CRP levels suggested that the exercise-induced rise in IL-6 was not related to exercise-induced inflammatory response. Furthermore, the associated increase in the number of monocytes did not correlate with exercise-induced IL-6 changes, negating monocytes as the source of IL-6.

Extended Station Blackout Analyses of an APR1400 with MARS-KS

Energy Technology Data Exchange (ETDEWEB)

Kim, WoongBae; Jang, HyungWook; Oh, Seungjong; Lee, Sangyong [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

2016-10-15

The Fukushima Dai-ichi nuclear power plant accident shows that natural disasters such as earthquakes and the subsequent tsunamis can cause station blackout for several days. The electricity required for essential systems during a station blackout is provided from the emergency backup batteries installed at the nuclear power plant. In South Korea, in the event of an extended station blackout, the life of these emergency backup batteries has recently been extended from 8 hours to 24 hours at Shin-Kori 5, 6 and APR1400 for design certification. For a battery life of 24 hours, available safety means system, equipment and procedures are studied and analyzed in their ability to cope with an extended station blackout. A sensitivity study of reactor coolant pump seal leakage is performed to verify how different seal leakages could affect the system. For simulating of extended station blackout scenarios, the best estimate MARS-KS was used. In this paper, an APR1400 RELAP5 input deck was developed for station blackout scenario to analyze operation strategy by manually depressurizing the reactor coolant system through the steam generator's secondary side. Additionally, a sensitivity study was performed on reactor coolant pump seal leakage.

Improvement of maglev model using high Tc superconductors and soft magnetic materials; Koon chodendotai to nanjiseitai wo kumiawaseta jiki fujo kiko no kairyo

Energy Technology Data Exchange (ETDEWEB)

Tsutsui, Y [Yasukawa Electric Corp., Kitakyushu (Japan). Basic Research Lab.; Higuchi, T [Kanagawa Academy of Science and Technology, Kawasaki (Japan); Kondo, N [Univ. of Tokyo, Tokyo (Japan)

1995-02-25

In this study, in a magnetic levitation system using pinning force of high temperature superconductors, for a propose of magnification of the stable contactless gap length and exclusion of mass regulation of a floater, a magnetic levitation model was improved. That is, the tangential component of an attractive force between a high temperature superconductor where magnetic flux was pinned and magnetic material is used for levitation and stable force in up and down directions, and restoring force generated due to pinned flux gathering was used for horizontal stabilization. For a floater made by using this principle, weight addition was necessary for letting the center of gravity down, however self-weight regulation of a floater is originally unnecessary. Thus, a magnetic levitation apparatus can be made without self-weight regulation of suspension and having a wide stable gap by using this levitation method. Since the floater was constructed under two rails, there are good points on easily dealing with the safety countermeasure in cases of which levitation would reduce or disappear. 4 refs., 7 figs.

Studies on the friction and wear properties of synchronizer rings and gear cones; Shinkuro kiko ni okeru masatsu mamo tokusei ni kansuru kenkyu

Energy Technology Data Exchange (ETDEWEB)

Hayashi, K; Kunoki, T [COSMO Research Institute, Tokyo (Japan)

1997-10-01

The influence of materials of synchronizer rings, automotive gear oils and sulfur-phosphorus EP additives on the friction and wear properties of synchromesh system was studied by using a synchromesh friction tester. As a result, the durability was decreased by using the synchronizer ring made of copper alloys. The initial friction performance estimated by using the synchronizer ring made of resin have influence on EP additives, in particular some kinds of phosphorus type additives. 3 refs., 12 figs.

[Evaluation of early physiotherapy in patients after surgical treatment of cruciate ligament injury by bone-tendon-bone method].

Science.gov (United States)

Klupiński, Kamil; Krekora, Katarzyna; Woldańska-Okońska, Marta

2014-01-01

Anterior cruciate ligament (ACL) is one of the most important structures of the knee joint. It has a stabilizing function and causes sliding movement between the articular surfaces. Most frequently there comes to the anterior cruciate ligament injury during practicing sports such as skiing, football, sports which require sudden turns and those which are associated with jumps for height like basketball and volleyball. The aim of study was to evaluate of the outcomes of complex physiotherapy after reconstruction of anterior cruciate ligament by bone -tendon-bone (BTB) method. The study involved 41 patients, 8 women and 33 men, aged 20 to 45 years, body height 1.60-1.90 cm and body weight 50-100 kg. The patients were divided into two groups. Group I included 26 patients (3 women and 23 men) after arthroscopic ACL reconstruction. Group II--control-group included 15 patients (5 women and 10 men) after ACL injury but not subjected to the ligament reconstruction. The patients from both groups underwent rehabilitation according to the same rehabilitation program suggested by the Medical Magnus Clinic in Lodz, which consisted in performing daily exercises in open and closed kinetic chains. All group I and II patients were examined three times: after surgery (before the start of the rehabilitation), in the sixth week of rehabilitation and 12 weeks afterwards. The clinical examination included: measurement of the range of movement in the knee joint, the measurement of musculoskeletal strength with Lovett scale, knee pain assessment using Visual Analog Scale (VAS), transpatellar anthropometric measurement of the knee joint, linear measurements of the thigh and shin (at two points: 5 and 10 cm above the patellar apex and at two points: 5 and 10 cm below the patellar base). Introduction of early highly specialized physiotherapy has been demonstrated to contribute to the improvement of the rehabilitation outcomes and to the shortening of the therapy. A statistically significant

Cisplatin induces protective autophagy through activation of BECN1 in human bladder cancer cells

Directory of Open Access Journals (Sweden)

Lin JF

2017-05-01

Full Text Available Ji-Fan Lin,1 Yi-Chia Lin,2 Te-Fu Tsai,2,3 Hung-En Chen,2 Kuang-Yu Chou,2,3 Thomas I-Sheng Hwang2–4 1Central Laboratory, Shin Kong Wu Ho-Su Memorial Hospital, Taipei, 2Division of Urology, School of Medicine, Fu-Jen Catholic University, New Taipei, 3Division of Urology, Department of Surgery, Shin Kong Wu Ho-Su Memorial Hospital, 4Department of Urology, Taipei Medical University, Taipei, Taiwan Purpose: Cisplatin-based chemotherapy is the first line treatment for several cancers including bladder cancer (BC. Autophagy induction has been implied to contribute to cisplatin resistance in ovarian cancer; and a high basal level of autophagy has been demonstrated in human bladder tumors. Therefore, it is reasonable to speculate that autophagy may account for the failure of cisplatin single treatment in BC. This study investigated whether cisplatin induces autophagy and the mechanism involved using human BC cell lines.Materials and methods: Human BC cells (5637 and T24 were used in this study. Cell viability was detected using water soluble tetrazolium-8 reagents. Autophagy induction was detected by monitoring the levels of light chain 3 (LC3-II and p62 by Western blot, LC3-positive puncta formation by immunofluorescence, and direct observation of the autophagolysosome (AL formation by transmission electron microscopy. Inhibitors including bafilomycin A1 (Baf A1, chloroquine (CQ, and shRNA-based lentivirus against autophagy-related genes (ATG7 and ATG12 were utilized. Apoptosis level was detected by caspase 3/7 activity and DNA fragmentation.Results: Cisplatin decreased cell viability and induced apoptosis of 5637 and T24 cells in a dose- and time-dependent manner. The increased LC3-II accumulation, p62 clearance, the number of LC3-positive puncta, and ALs in cisplatin-treated cells suggested that cisplatin indeed induces autophagy. Inhibition of cisplatin-induced autophagy using Baf A1, CQ, or ATG7/ATG12 shRNAs significantly enhanced cytotoxicity of

Data book of new energy introduction to Hokkaido. FY 2000 version; Hokkaido shin energy donyu data shu. 2000 nendoban

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For the purpose of effectively introducing/promoting new energy and of supplying the basic data which contribute to the promotion/education, the actual results of new energy introduction to Hokkaido were collected/arranged. New energies to be surveyed were the photovoltaic power generation, solar heat utilization, wind power generation, waste power generation, waste heat utilization, waste fuel production, biomass energy, unused energy, gas generation, petroleum cogeneration, fuel cells, clean energy vehicles, small-/medium-scale hydroelectric power generation, etc. The purpose of the book is mainly to collect the basic information, that is, what kind of new energy has been introduced to what kind of area. The data are so collected that facilities adopting new energy can be seen as unit of city/town/village as a rule. The method to collect information is based on the total collection of the reports made by organizations in/outside Hokkaido. The book additionally covers the details of the data supplied and the data collected. (NEDO)

Basic survey report on regional new energy vision for Ehime Prefecture; Ehimeken chiiki shin energy vision kiso chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

A new energy vision has been formulated to establish guidelines for popularizing and utilizing new energy which generates but a small amount of environmental impact. The results of surveys conducted in this connection are described in five chapters, which cover (1) the trend of new energy, (2) current situation of new energy in Ehime Prefecture, (3) calculation of the existing amount and available amount of new energy, (4) calculation of the introducible amount of new energy, and (5) the basic policy toward the introduction of new energy. Part (4) covers solar energy, wind energy, waste-derived energy, temperature difference energy, minor scale hydroelectric power generation, biomass energy, and like others. It states that a total of 540,000 kl/year will be available in terms of oil, equivalent to approximately 6% of Ehime Prefecture's 1997 energy consumption, and that it is expected that in fiscal 2010 photovoltaic/passive solar energy utilization, cogeneration, and wind power will yield 152,000, 314,000, and 27,000 kl/year respectively. (NEDO)

FY 2001 report on the new energy vision of Ajigasawa Town; 2001 nendo Azigasawa machi shin energy vision hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-02-01

For the purpose of promoting the introduction of new energy and enhancing the awareness of it in Ajigasawa Town, Aomori Prefecture, an investigational study was conducted of the amount of energy demand of the town, potential introduction of new energy, etc., and a new energy vision was worked out. The population of Ajigasawa Town was 13,551 according to the results of the national census taken in 2000, which is slightly decreasing. The energy demand is broken down into 40.1% in the transportation sector, 35.4% in the industrial sector and 24.5% in the commercial/residential sector, depending on petroleum (81.8%) and electric power (13.1%). The CO2 emission amount from the above is estimated at 26,210 t-C/y in total. In the model project for new energy introduction, the following were selected: wind power generation for the filtration plant of water supply system/night soil treatment plant/funeral hall/comprehensive park/seed and seedling center; photovoltaic power generation for the trip village for youth/elementary schools; fuel cell/hybrid car for Ajigasawa town office; micro-hydroelectric power generation for nursery; natural gas cogeneration for the insurance welfare center. (NEDO)

Report for fiscal 2000 on feasibility study for commercializing new energies; 2000 nendo shin energy jigyoka feasibility study hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-02-01

Tobu Town in Nagano Prefecture has established a 'Tobu Town new energy vision' and set up a polity to make efforts in discussing new energy introduction into public facilities which will be constructed in the future. Discussions were given on commercialization possibilities of the energy center system, particularly energy supply by cogeneration utilizing natural gas, for the four facilities in the 'Forest of Welfare'. Comparison was performed on primary energy consumption, CO2 emission reducing quantity, and economic performance between the existing energy supply systems and the energy center system. Discussions were also given on means to utilize solar energy. The plan calls for establishing the energy center in the 'Forest of Welfare', wherein facilities composed mainly of a gas engine type cogeneration plant (500 kW) and a solar heat collector (36.4 m{sup 2}) will be installed to supply the object facilities with electric power and hot water. This operation will be able to reduce the primary energy consumption by 12% and CO2 emission by 18%. (NEDO)