Comprehensive and Critical Literature Review on Insitu Micro-Sensors for Application in Tribology

Science.gov (United States)

1994-04-01

Tsugai, Masahiro; Bessho, Mikio ; Araki, Toru; Onishi, Masayoshi; Sesekura, Takashi Source: SAE Technical Paper Series. Publ by SAE, Warrendale, PA, USA...MONITORING OF HYDROGEN ASSISTED CRACKING OF LOW ALLOY STEEL. Author. Hayashi, Yasuhisa; Takemoto, Mikio Source: Boshoku Gijutsu/Corrosion Engineering v...METALS AND ITS APPLICATION TO AE SENSOR. Author. Shimizu, Hiroshi; Watanabe, Hiroshi; Sato , Michio Source:. Japanese Journal of Applied Physics, Supplement

Fiscal 1999 research report on long-term energy technology strategy. Basic research on industrial technology strategy (Individual technology strategy). Machine industry technology field (Semiconductor equipment); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku) kikai sangyo gijutsu bun'ya (handotai seizo sochi bun'ya)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This report summarizes the fiscal 1999 basic research result on industrial technology strategy of a semiconductor equipment field, viewing until 5-10 years after. For the future semiconductor industry, the favorable cycling of creation of new demands through performance improvement, and further technology innovation through market expansion is essential absolutely. Since technology development is followed by investment, not only the performance of each equipment but also the higher productivity and cost balance of the whole factory are essential. Self-intelligent function and networking are thus necessary for the equipment. As measures for environment preservation and energy saving, such innovative technologies are required as recycling, reuse, reaction process improvement and alternative technology. Because of diverse final products and a short life time of products, a large-scale collective investment is becoming difficult. A mini-line sequential investment production system according to demand scales is under investigation. Some issues such as micro-technology, realization of 300mm wafer, modularization, CIM, reliability and standardization are also described. (NEDO)

Transtorno do comportamento alimentar em atletas de elite de nado sincronizado Eating disorders in elite synchronized swimmers

Directory of Open Access Journals (Sweden)

Talita Adão Perini

2009-02-01

Full Text Available OBJETIVOS: O objetivo do presente estudo foi identificar a presença de transtorno do comportamento alimentar (TCA ou síndromes precursoras e o grau de distorção da imagem corporal em atletas de elite de nado sincronizado. Essa modalidade é considerada de risco para desenvolvimento de TCA por valorizar, além de outros aspectos, a leveza e beleza de movimentos que, de certa forma, estão associados a baixa massa corporal. MÉTODOS: Foram avaliadas 27 atletas de nado sincronizado, sendo 19 da categoria juniores (15,6 ± 0,8 anos e oito da categoria de seniores (19,0 ± 1,3 anos que compunham a seleção brasileira na época do estudo (2000. Um grupo de 32 adolescentes não-atletas (15,0 ± 1,6 anos foi usado para comparação com as atletas. Os procedimentos metodológicos adotados foram: aplicação de três instrumentos de auto-relato, validados. 1 EAT-26 - presença de comportamentos alimentares inadequados; 2 BITE - presença de atitudes sugestivas de bulimia nervosa; e 3 BSQ - insatisfação da auto-imagem corporal. RESULTADOS: Embora tanto o grupo de atletas, quanto o de não-atletas tenham apresentado parâmetros antropométricos compatíveis com padrões saudáveis para a idade e sexo, os resultados evidenciam a presença de insatisfação com a auto-imagem corporal e a adoção de práticas patológicas de controle da massa corporal, sobretudo entre atletas da categoria juniores e entre as adolescentes não-atletas. CONCLUSÕES: Os resultados encontrados no presente estudo retratam uma tendência mundial de preocupação com a aparência entre adolescentes capaz de levá-las à adoção de condutas não-saudáveis.OBJECTIVES: The aim of the present study was to identify the Eating Behavior Disorder (EBD or precursory syndromes and the level of distortion of the body image of elite synchronized swimming athletes. This sport modality is considered of risk for development of eating disorders for valuing, among other aspects, the

Interferência dos ácidos graxos ômega-3 nos lipídeos sangüíneos de ratos submetidos ao exercício de natação Omega-3 fatty acids interference on the blood lipids of rats subjected to swimming exercise

Directory of Open Access Journals (Sweden)

Bettina Moritz

2008-12-01

Full Text Available OBJETIVO: Investigar os efeitos da suplementação com ácidos graxos ômega-3, nas doses de 0,5 e 1,0g/kg/dia, nos lipídeos sangüíneos de ratos submetidos ou não ao protocolo do nado. MÉTODOS: Ratos Wistar foram divididos em grupos: controle, controle+nado, ácidos graxos ômega-3 e ácidos graxos ômega-3+nado. Os ácidos graxos ômega-3 e ácidos graxos ômega-3+nado receberam suplementação; os demais receberam água por gavagem. Os controle+nado e ácidos graxos ômega-3+nado foram submetidos ao exercício. Foram avaliadas as concentrações plasmáticas de colesterol total, triglicérides e lipoproteína de alta densidade, antes e após os procedimentos experimentais. RESULTADOS: No protocolo de 0,5g/kg/dia, em relação às concentrações de colesterol total, foi observada redução significativa proporcionalmente maior no grupo ácidos graxos ômega-3+nado, apesar de o grupo controle+nado e o ácidos graxos ômega-3 também terem apresentado diminuição. No ensaio de 1,0g/kg/dia todos os grupos apresentaram uma diminuição que foi maior, respectivamente, no ácidos graxos ômega-3+nado e, a seguir, no ácidos graxos ômega-3. Quanto aos triglicérides, foram encontradas reduções em todos os grupos experimentais, que foi maior no grupo ácidos graxos ômega-3+nado, do protocolo de 0,5g/kg/dia, enquanto que no de 1,0g/kg/dia a diminuição foi significativa apenas nos grupos ácidos graxos ômega-3 e ácidos graxos ômega-3+nado. Quanto ao HDL, no protocolo de 0,5g/kg/dia foi encontrado aumento nos animais que não foram suplementados, enquanto que em todos os grupos de 1,0g/kg/dia houve uma diminuição do HDL. CONCLUSÃO: A suplementação com ácidos graxos ômega-3 nas doses 0,5 ou 1,0g/kg/dia, associada ao nado, reduzem as concentrações plasmáticas de colesterol total e triglcérides, mas estudos adicionais, também com outras doses, são necessários para a compreensão da relação entre a ingestão de óleo de peixe e

JPRS Report, Science & Technology, Japan: Symposium on Applications of Advanced Technology: Sensors

Science.gov (United States)

1992-03-02

Tokyo SENTAN GIJUTSU OYO formation of amphipathic cellular membrane compo-SYMPOSIUM in Japanese 3 Sep 91 pp 37-45 nents of procaryote , rhamnolipids A...rhamnolipid has a nonionic sugar part and an anionic cellular liposome as the matrix lipid of a biological film, carboxylic group as the hydrophilic...the phospholipids of bacterial 3. Liposome Sensor cellular membranes have no phosphatadyl choline and consist mainly of phosphatadyl ethanolamine, 4

Antidepressant behavioral effects of duloxetine and amitriptyline in the rat forced swimming test Efeitos antidepressivos da duloxetina e da amitriptilina no teste do nado forçado em ratos

Directory of Open Access Journals (Sweden)

Honório Sampaio Menezes

2008-10-01

Full Text Available PURPOSE: To compare the effects of the antidepressant drugs duloxetine and amitriptyline on depressive behaviors in rats. METHODS: Fifteen male Wistar rats were given systemic injections of duloxetine, amitriptyline or saline prior to a Forced Swimming Test (FST. Immobility and number of stops were measured. Data were analyzed by one-way ANOVA and Kruskall-Wallis. RESULTS: Rats given injections of duloxetine displayed fewer stops than the amitriptyline and control group (pOBJETIVO: Comparar o efeito antidepressivo da droga cloridrato de duloxetina com a amitriptilina. MÉTODOS: O teste do nado forçado, teste comportamental que avalia a atividade antidepressiva em ratos, foi utilizado em 15 ratos Wistar, machos adultos, divididos em três grupos iguais: duloxetina, amitriptilina e controle. Os dados foram analisados pelo teste One-way ANOVA e Kruskall-Wallis. RESULTADOS: Houve diferença significativa entre o número de paradas (p <0,05 entre os grupos duloxetina e amitriptilina e o grupo controle. Grupo amitriptilina e controle não apresentaram diferença (p=0,8. CONCLUSÃO: A duloxetina reduziu o comportamento depressivo sendo mais efetiva do que a amitriptilina.

Análise dos parâmetros cinemáticos determinantes do desempenho na prova de 200 m nado livre Analysis of the determinant kinematical parameters for performance in the 200-m freestyle swimming event

Directory of Open Access Journals (Sweden)

Maria Inês Ferreira

2012-06-01

Full Text Available Os objetivos deste estudo foram: i caracterizar o nado submáximo e máximo do ponto de vista cinemático; ii verificar a influência das variáveis cinemáticas na prova máxima de 200 metros crawl. Nove nadadores de elite nacionais realizaram dois testes: um submáximo, descontínuo de intensidade progressiva; outro máximo, que consistiu em uma simulação de uma prova de 200 m crawl. Foram estudados os parâmetros cinemáticos gerais da mecânica da braçada, a duração de cada fase do ciclo gestual, a velocidade do centro de massa e a variação intracíclica da velocidade horizontal. Verificaram-se diferenças cinemáticas significativas da frequência gestual, velocidade de deslocamento do centro de massa, duração total do ciclo gestual, duração da ação subaquática propulsora e da velocidade do centro de massa na fase de recuperação entre os testes. Identificou-se associações significativas entre o teste máximo e algumas variáveis cinemáticas como a velocidade do centro de massa e índice de nado.The main aims of this study were i to perform a kinematic characterization of sub and maximal swimming speed; ii to investigate the associations between the kinematic profiles and the 200 m front crawl style. Nine national level male swimmers performed two speed tests: a submaximal discontinuous speed trial of progressive speed intensity, and a maximal one, simulating a 200 m front crawl style. The stroke general kinematic parameters, the phases duration of the stroke cycle, the velocity of the centre of mass and the intra cyclic variation of the horizontal velocity were herein studied. Significant kinematic differences in relation to stroke rate, horizontal velocity of the centre of mass, total cycle duration, absolute and relative duration of the propulsive sub aquatic action and the velocity of the centre of mass during the arms recovery were compared between the speed tests. Significant correlations between the performance in

Descrição da aptidão inicial para natação em lesionados medulares Description of initial swimming ability in patients with spinal cord injury

Directory of Open Access Journals (Sweden)

Ana Cláudia Raposo Melo

2009-12-01

Full Text Available Este estudo tem por objetivos verificar o retorno à natação após a lesão medular e descrever a aptidão inicial de lesionados medulares para o nado como parte das atividades do programa de reabilitação no Hospitalar Sarah-Centro. MÉTODOS: Foram avaliados 170 pacientes com diagnóstico de paraplegia e tetraplegia, em três etapas - levantamento de dados em prontuário, entrevista oral e avaliação do padrão do nado. Os resultados apontaram que grande parte dos pacientes não entrou na piscina ou realizou nado após a lesão medular. A avaliação da adaptação ao meio líquido após a lesão medular demonstrou que grande parte dos pacientes realizou a imersão e flutuação de forma independente, porém, apresentando dificuldade em mudar de decúbito dentro da água. Apenas uma pequena porcentagem retomou a natação após a lesão medular; foi também verificada redução no total dos sujeitos que nadavam regularmente antes. A avaliação apontou que os nados crawl e de costas foram realizados por metade dos avaliados; apenas uma pequena parte realizou nado de peito. CONCLUSÃO: Após a avaliação dos relatos dos pacientes, verificou-se redução na prática da natação, seja como atividade esportiva, física ou de lazer após a lesão medular, apesar de a aptidão para o nado não ter sofrido grandes alterações.Pysical activity, particularly swimming, that brings a lot of benefits to subjects with spinal cord injury, can be started during rehabilitation. The aims of this study were to describe the initial ability to swim of patients with spinal cord injury during the rehabilitation program at the Sarah Hospital - Center. METHODS: 170 patients were evaluated in three steps - medical records data collection, oral interview and swimming evaluation. The results showed that a large proportion of patients did not enter the swimming pool or swam after spinal cord injury. Only a small part returned to swimming after the spinal cord

Buoyancy and similarity of the swimming of Manta birostris(Elasmobranchii: Myliobatidae) with the flying cycle of Columba livia(Aves: Columbidae)

OpenAIRE

Meza Vélez, Iván

2013-01-01

Se analizó la física de la flotación en la mantarraya Manta birostrisy se comparó el nado con el ciclo de vuelo de la paloma doméstica Columba livia, con la finalidad de encontrar similitudes y diferencias en las locomociones y las leyes físicas que intervienen. Se demostró que uno de los dos ciclos de nado estudiados de esta especie posee tres de las cuatro fases principales del ciclo de vuelo de la paloma doméstica. También se demostró un “efecto paracaídas” en M. birostris, el cual le ...

FY 2000 report on the results of the technology development of energy use reduction of machine tools, etc. Technology development of environmental load reduction related to water soluble lubricating oil, etc. (R and D of low energy coolant degradation prevention technology and waste liquid processing technology); 2000 nendo energy shiyo gorika kosaku kikai nado gijutsu kaihatsu seika hokokusho. Suiyosei junkatsuyu ni kakawaru kankyo fuka teigen nado gijutsu kanri (tei energy coolant fuhai boshi gijutsu oyobi haieki shori gijutsu no kenkyu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

The R and D were carried out on a system by which the long life of coolant of machine tools can be achieved and a system to process waste efficiently, economically and with less environmental loads, and the FY 2000 results were summed up. In the R and D of a system to prevent degradation of low energy coolant, measurement was made of effects of the degradation prevention system at a laboratory level, and it was found out that propagation of bacteria causing the degradation can be prevented with pH kept high. Further, it was admitted that the alkali effect on metal formability was not very much. As to the coolant processing, in the present situation, most of the coolant is taken back by industrial waste processing dealers. So, the development of the low energy waste liquid processing system is earnestly desired. In the R and D of the low energy waste liquid processing system, test on characteristics evaluation was conducted about each method of systems. Subjects to be improved/solved were extracted such as the point that volatile organic matters are included in condensed water after evaporation of waste liquid and there seems to be a possibility of needing the secondary processing. (NEDO)

Utilização do intercepto-y na avaliação da aptidão anaeróbia e predição da performance de nadadores treinados El uso del intercepto-y en la evaluación de adaptacion anaeróbica en la predicción de la performance de nadadores especializados Use of the y-intercept in the evaluation of the anaerobic fitness and performance prediction of trained swimmers

Directory of Open Access Journals (Sweden)

Marcelo Papoti

2005-04-01

Full Text Available O objetivo desse estudo foi verificar a utilização do intercepto-y na avaliação da aptidão anaeróbia e predição da performance de nadadores treinados. Foram participantes do estudo 14 nadadores com idade entre 15 e 18 anos. Os atletas realizaram o teste de nado atado, performance máxima e velocidade crítica (VC para determinação da capacidade de nado anaeróbio (CTA, todos em nado crawl em um período de três dias. 1 O teste de nado atado consistiu em realizar esforço máximo durante 30 segundos amarrado a um aparato de medição com células de carga para mensuração da força pico (Fpic, aptidão anaeróbia (AP ANA e concentração de lactato pico ([la-]pic conforme Papoti et al. (11; 2 Os participantes realizaram também performances máximas nas distâncias de 100, 200, 300, 400 e 600 m, com intervalo mínimo de duas horas entre cada nado; 3 E o teste de VC foi aplicado para determinação da CTA utilizando todas as combinações possíveis dos resultados das performances máximas, através do modelo de regressão linear entre distância versus tempo. Foi encontrada média de 25,07± 4,22 m nas 16 combinações de CTAs encontradas e coeficiente de regressão linear variando entre 0,99 e 1,00 e erro de coeficiente linear de 19,30± 5,9%. Não foram encontradas correlações significativas entre as CTAs e performances máximas, Fpic (227,81± 63,02 N, AP ANA (86,55± 13,05 N e [la-]pic (6,80± 1,03 mM. Contudo, foram encontradas correlações significativas entre a AP ANA e as performances máximas. Desse modo, é possível concluir que a CTA representada pelo intercepto-y da relação distância versus tempo de nado, parece não ser um bom parâmetro na avaliação da aptidão anaeróbia e predição de performances entre 100 m e 600 m nado crawl.El objetivo de ese estudio fue verificar el uso del intercepto-y en la evaluación anaeróbica de la aptitud y predicción de la performance de los nadadores especializados. Los

Aplicación de volúmenes de nado para las categorías 11 - 12 y 13 -14 años de los atletas de la escuela de natación de Pinar del Río

Directory of Open Access Journals (Sweden)

Zaylen Serralta Hernández

2011-12-01

Full Text Available La presente investigación es un estudio realizado con los atletas de las categorías 11-12 y 13-14 años de La Escuela de Natación de Pinar de Río, tomando como muestra a todos los alumnos de estas categorías a partir del curso 2007-2008. Se analiza detalladamente los volúmenes de nado propuestos por el Programa de Preparación del Deportista (PPD, donde se aprecia que los atletas de la provincia no logran cumplir lo indicado por el mismo, siendo el inicio tardío en la práctica del deporte, la carencia de piscinas con un funcionamiento estable y las bajas temperaturas en el periodo invernal, los que más afectan el proceso. Provocando esto que no se alcancen resultados satisfactorios y con ello desmotivación y deserción por parte de los alumnos. La aplicación de los nuevos volúmenes inferiores a los PPD nos permitió obtener una mejor progresión y resultados satisfactorios en los eventos que se participa en las distintas competencias.

Estudio preliminar de la expresión proteómica cerebral de la región hipocampal de ratas expuestas a diferentes niveles de estrés inducido por el nado forzado Preliminary study of cerebral proteomics expression of hippocampal region from rats exposed to different stress levels induced by forced swimming

Directory of Open Access Journals (Sweden)

Guerrero Nasser

2012-04-01

Full Text Available Introducción: en general, los estímulos estresores pueden inducir respuestas adaptativas o mal adaptativas dependiendo, entre otras cosas, de su intensidad y la duración. Sin embargo, no se han llevado a cabo estudios que relacionen cuantitativa y cualitativamente la intensidad de estrés al que es expuesto un animal y la expresión de proteínas del hipocampo. Objetivo: evaluar la expresión diferencial de proteínas hipocampales en ratas Wistar-UIS, expuestas a diferentes niveles de estrés inducido por el nado forzado. Materiales y métodos: se utilizaron 30 ratas Wistar-UIS machos distribuidas aleatoriamente en 3 grupos según el tiempo de exposición al nado forzado como estímulo estresor (0, 5 y 15 minutos. Después de 24 horas se extrajeron los hipocampos dorsales y se realizó electroforesis bidimensional de las proteínas extraídas. A continuación, se llevó a cabo el procesamiento de las imágenes de los geles obtenidos utilizando el software PDQUEST 2D. Aquellas proteínas en las se detectaron intensidades asociadas a los tiempos de exposición al estímulo, se identificaron de manera presuntiva utilizando la base de datos bioinformática Export Protein Analysis System (EXPASY. Resultados: de acuerdo con el análisis proteómico y bioinformático se identificaron 60 proteínas, de las cuales, 38 eran comunes al hipocampo derecho e izquierdo; 13 del hipocampo derecho y 9 del izquierdo. Conclusión: se encontraron diferencias en la expresión de proteínas entre el hipocampo derecho e izquierdo del tipo dosis dependientes decrecientes después de haber sometido a los animales a diferentes niveles de estrés inducido por la prueba de nado forzado. Salud UIS 2012; 44 (1: 17-27Introduction: in general stressful stimuli can induce adaptive maladaptive responses, depending among other things, of their intensity and duration. However, no studies were found in the literature that link quantitatively and qualitatively the intensity of

FY 2000 survey on technical trends. Survey of technical trends on materials for heightening of performance for power generation facility use; 2000 nendo gijutsu doko nado chosa. Hatsuden shisetsuyo koseinoka zairyo ni kakawaru gijutsu doko nado chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

As to high performance/high function plastic materials used in power generation facilities, technical trends were surveyed on the recycle situation and recycle R and D to study the subjects to be solved. For wire covering materials, vinyl chloride, polyethylene, rubber, etc. are used, and the recycle of resin has not been advanced. Concerning the generation of waste plastic, the existence of a lot of plastics different in characteristics makes the recycle difficult. As to the use of waste plastic as resource, the material recycle and recovery of combustion energy are being made, but only a part of the plastic is reused as chemical raw materials. Relating to the R and D of the chemical recycle technology, there are sample studies on the pyrolysis of polyolefine, dechlorination of chlorine base resins, etc. Recently, the following have been made public: proposal of depolymerization monomer based on the cyclic monomer, study of liquefaction of approximately 100% of the thermosetting resin, approach to the solvolysis by supercritical solvent. (NEDO)

Dinamometria isocinética de tronco em nadadores de diferentes estilos Isokinetic trunk dynamometry in diferent swimming strokes

Directory of Open Access Journals (Sweden)

Leonardo Luiz Barretti Secchi

2010-01-01

Full Text Available OBJETIVOS: Comparar a atividade muscular dos músculos flexores e extensores de tronco entre estilos de nado assimétrico e nado simétrico. MÉTODO: Catorze nadadores da elite, velocistas e especialistas em um dos quatro estilos da natação sem história prévia de lesões.. Divididos em dois grupos de sete atletas: 1. Grupo nado assimétrico (GNA: constituído por cinco atletas que nadam o estilo crawl e dois atletas que nadam o estilo costas. 2. Grupo nado simétrico (GNS formado por sete atletas: quatro atletas nadadores no estilo peito e três nadadores no estilo borboleta. Todos foram avaliados no dinamômetro isocinético Cybex 6000. RESULTADOS: O tempo de aceleração na velocidade de 120º/ s do grupo flexor do tronco foi maior no GNS (p=0,054. A potência do grupo extensor nas velocidades de 90 e 120º/ segundo foi maior no GNA que no GNS (p=0,053 e 0,052 respectivamente. Não houve diferença estatística significante nas demais variáveis analisadas. CONCLUSÃO: Os nados assimétricos (crawl e costas proporcionam uma resposta muscular (recrutamento mais eficiente nos grupo dos flexores do tronco, possivelmente pela manutenção constante da contração isométrica dos músculos abdominais.OBJECTIVE: To compare the effect of asymmetric and symmetric swimming strokes on muscle activity of the trunk flexor and extensor muscles. METHODS: Fourteen elite speed swimmers, specialists in one of four swimming styles, all without any history of spinal cord injury, were divided in two groups: 1 asymmetric group, consisting of five athletes specializing in the freestyle stroke and three in the backstroke; and 2 symmetric group, consisting of four athletes specializing in the butterfly stroke and three in the breaststroke. All the swimmers were assessed using a Cybex 6000 isokinetic dynamometer. RESULTS: The acceleration time for the trunk flexor group at a speed of 120º per second was greater in the symmetric group (p=0.054. The power of the

Fiscal 1999 achievement report. Development of technology for machine tool with energy consumption rationalized (Research and development of environment-conscious grinding system); 1999 nendo energy shiyo gorika kosaku kikai nado gijutsu kaihatsu seika hokokusho. Kankyo taiogata kensaku kako system no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

A large quantity of coolant is used in the grinding process for ensuring high accuracy and quality in the work. This presents a serious problem from the viewpoint of environmental impact or energy conservation, and now environment-conscious grinding methods requiring no or less coolant are sought for. With a view to answering the demand, efforts are exerted to put to practical use, and improve, an EcoloG grinding technique. The goal is to reduce to half the energy that the grinding process is now consuming. The EcoloG technique is a grinding method under which vegetable oil mist is cooled for lubrication and a small amount of cooling water is fed to the point of grinding for removing chips. In fiscal 1999, a survey was conducted on technical literature, patents, and the like in and out of Japan for the study of the actual state of dry machining, and then the course of future studies was clearly established. Studies were also carried out aiming at the practical application and improvement of the EcoloG grinding technique, and the technique achieved a quality level as high as that of the conventional coolant-aided method in a process of grinding a shaft to have an accurate outer diameter by use of an ordinary wheel head. (NEDO)

Políticas do presente em Carlos Ríos e César Aira

Directory of Open Access Journals (Sweden)

Antonio Carlos Santos

2013-06-01

Full Text Available Em Manigua, Pripyat e A la sombra de Chaki Chan, Carlos Ríos nos mostra uma face da con­temporaneidade: três territó­rios na mar­gem do Império, um aban­do­nado depois de um aci­dente na Usina Nuclear de Chernobil e habitado por seres con­tami­nados pela radia­ção, outro dispu­tado por etnias em vias de desapareci­mento e um terceiro disputado por gru­pos de catadores de alumínio. São relatos que se fazem com fragmentos catados na Internet, nomes, listas de palavras, peda­ços de histórias reutilizados em uma literatura que se faz com os restos de modos de vida que resis­tem em meio ao caos da guerra permanente.

¿Alcoholismo en Galicia: un camiño sen esperanza?

OpenAIRE

Folgar de la Calle, José María; Martín Sánchez, Rita

2012-01-01

O alcoholismo en Galicia é un mal endémico, polo que os enfermos non son considerados marxi­ nados. Os dous filmes que comentamos tentan chamar a atención e concienciar á sociedade sobre o carácter atípico deste problema.

Eradication of sweet potato weevil using Co-60 gamma radiation

International Nuclear Information System (INIS)

Tokunaga, Taizo

2007-01-01

Sweet potato weevil which is a harmful insect injuring sweet potatoes was found out at Yoron Island in 1915 for the first time in Kagoshima prefecture, Japan. Here the eradication of sweet potato weevils using cobalt 60 irradiation achieved at Kikai Island is described. The mass-reared male weevils in potatoes are in pasture after sterilized by gamma irradiation. If the sexually sterile male copulates with a wild female, the egg does not incubate. By the repeated sterilization during several generations, the eradication of sweet potato weevils was accomplished. (M.H.)

"It's not the size of the ship…"

DEFF Research Database (Denmark)

Christiansen, Ask Vest; Gleaves, John

2013-01-01

the challenge and reflected upon the conference theme "What do we (really) know about doping?" in their presentations. Not only as regards to the reliability of official statistics and the information that flows from organisations, NADOs and other stakeholders in sport, but also the more demanding task...

Políticas do presente em Carlos Ríos e César Aira

Directory of Open Access Journals (Sweden)

Antonio Carlos Santos

2013-12-01

Full Text Available http://dx.doi.org/10.5007/1984-784X.2013v13n19p20 Em Manigua, Pripyat e A la sombra de Chaki Chan, Carlos Ríos nos mostra uma face da con­temporaneidade: três territó­rios na mar­gem do Império, um aban­do­nado depois de um aci­dente na Usina Nuclear de Chernobil e habitado por seres con­tami­nados pela radia­ção, outro dispu­tado por etnias em vias de desapareci­mento e um terceiro disputado por gru­pos de catadores de alumínio. São relatos que se fazem com fragmentos catados na Internet, nomes, listas de palavras, peda­ços de histórias reutilizados em uma literatura que se faz com os restos de modos de vida que resis­tem em meio ao caos da guerra permanente.

Simulation of the Tornado Event of 22 March, 2013 over ...

Indian Academy of Sciences (India)

2013-03-22

Mar 22, 2013 ... nagar and Akhaura upazila of Brahmanbaria district (DMIC 2013). Other damages of this tor- nado event were the damages and/or collapses of electric lines and poles, boundary wall, entrance gate, communication systems, breaking down of numerous trees, etc. The location of Brahmanbaria. (23.95.

School Principals and Racism: Responding to Aveling

Science.gov (United States)

Charles, Claire; Mahoney, Caroline; Fox, Brandi; Halse, Christine

2016-01-01

This study responds to Nado Aveling's call in "Anti-racism in Schools: A question of leadership?" ("Discourse: Studies in the Cultural Politics of Education," 2007, 28(1), 69-85) for further investigation into racism in Australian schools. Aveling's interview study concluded that an overwhelming number of school principals…

Report on technological trend survey in fiscal 2000. Survey on bio-technology development strategy; 2000 nendo gijutsu doko nado chosa hokokusho. Bio technology gijutsu kaihatsu senryaku chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Survey and research have been performed on bio-technologies as to their seeds of technological development projects to be worked on by the government from the viewpoint of industrial utilization technologies. In the survey on the trends of research and development and technological development on human-genomes, the survey has been done on the status of execution in the Millennium Genome Project, and how the works related to human-genomes are done at the bio-related government based research organizations and the private sector research organizations. Trends related to the human-genome research in overseas countries were also surveyed. With regard to the future prospect of research and development in the post genome age, discussions were given on the result of the questionnaire survey on opinion leaders in the industrial, governmental and academic areas. In discussing the viewpoint of the industrial utilization technologies related to human genomes, candidates assumed usable in the genome related application fields were discussed, and a basic framework of a technological map was prepared. Based on the results thereof, the technological development areas anticipated to be important in the future were extracted, and the technological development themes were discussed. (NEDO)

Technological development of machine tools using less energy in fiscal 2000. Achievement report on research and development of cutting process replacing electric discharge processing; 2000 nendo energy shiyo gorika kosaku kikai nado gijutsu kaihatsu seika hokokusho. Hoden kako wo chikansuru sessaku kakoho no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Research and development has been made with an objective to replace the electric discharge processing consuming a large amount of energy and having environmental load, with the cutting process consuming less energy while maintaining the equivalent processing precision. This paper summarizes the achievements in fiscal 2000. Development of cutting tools has made three times or more as many multi-aspect utilization as compared to conventional tools possible by researching the tip shapes. In addition, ultra hard end mill suitable for cutting very hard materials using an ultrasonic cutting head was fabricated on the trial basis, and its cutting capability was verified. In developing the cutting processing heard, a vibration mode possible of cutting with the ultra hard tool was generated, ATC has become possible, and the possibility of cutting hard-to-cut materials was verified. For processing a narrow and deep part, an improved type tool was developed, whereas the practical cutting performance suppressing wear of the blade tip was obtained. To deal with the environment, development and prototype fabrication were performed on a unit having a grease lubricated high-speed main shaft that is considered to be the mainstream in the future. In the operation test at 20,000 min-L, know-how was acquired in relation with the basic performance, manufacture and use of the unit. (NEDO)

FY 2000 report on the results of the technology development of energy use reduction of machine tools. Development of dry cutting use abrasion resistant/lubricous coated tools; 2000 nendo energy shiyo gorika kosaku kikai nado gijutsu kaihatsu seika hokokusho. Dry sessakuyo taimamo junkatsusei hifuku kogu no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For the purpose of energy conservation and reduction of environmental loads of machine tools, study was conducted on the dry cutting which is the cutting with no use of cutting oil, and the FY 2000 results were summed up. The study was made on dry cutting use abrasion resistance/lubricous coated tools coated with the composite membrane of which the cutting life become little lower than that of existing tools using coolant. In the survey of abrasion resistant/lubricous films, it was found out that in the adhesion to ultra-hard substrates, the DLC single-layer film consisting only of carbon indicated the same excellent adhesion as intermediate-layer inserts. As to the synthesis of abrasion resistant/lubricous films, the synthesis of the composite membrane (WC/C membrane) consisting of tungsten carbide (WC) and carbon (C) was made using arc ion plating device. The WC/C membrane is composed of W and C and has the structure in which at nm levels the layer with much W and the layer with less W were alternately piled. Study was made of devices necessary for the development of abrasion resistant/lubricous films and the film formation for drill. (NEDO)

Report on the present situation of the FY 1998 technical literature database; 1998 nendo gijutsu bunken database nado genjo chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

To study database which contributes to the future scientific technology information distribution, survey/analysis were conducted of the present status of the service supply side. In the survey on the database trend, the trend of relations between DB producers and distributors was investigated. As a result, there were seen the increase in DB producers, expansion of internet/distribution/service, etc., and there were no changes in the U.S.-centered structure. Further, it was recognized that the DB service in the internet age now faces the time of change as seen in existing producers' response to internet, on-line service of primary information source, creation of new on-line service, etc. By the internet impact, the following are predicted for the future DB service: slump of producers without strong points and gateway type distributors, appearance of new types of DB service, etc. (NEDO)

Report on the present situation of the FY 1998 technical literature database; 1998 nendo gijutsu bunken database nado genjo chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

To study database which contributes to the future scientific technology information distribution, survey/analysis were conducted of the present status of the service supply side. In the survey on the database trend, the trend of relations between DB producers and distributors was investigated. As a result, there were seen the increase in DB producers, expansion of internet/distribution/service, etc., and there were no changes in the U.S.-centered structure. Further, it was recognized that the DB service in the internet age now faces the time of change as seen in existing producers' response to internet, on-line service of primary information source, creation of new on-line service, etc. By the internet impact, the following are predicted for the future DB service: slump of producers without strong points and gateway type distributors, appearance of new types of DB service, etc. (NEDO)

Optimization of sustaining swimming speed of matrinxã Brycon amazonicus: performance and adaptive aspects Otimização da velocidade de nado sustentado em matrinxã Brycon amazonicus: rendimento e aspectos adaptativos

Directory of Open Access Journals (Sweden)

Gustavo Arbeláez-Rojas

2010-01-01

,5 comprimentos corporais - BL por segundo. As melhores velocidades de nadado estiveram entre 1,0 e 1,5 BL s–1, nas quais o crescimento dos peixes foi 20% maior que nas outras. A hemoglobina e as células vermelhas do sangue em 1,5 BL s–1 aumentaram 24% e 18% respectivamente; o hematócrito foi 17 % maior em todos os peixes exercitados; o conteúdo de proteína do músculo branco em 1,0 BL s–1 foi 2% maior; a deposição de lipídio no músculo vermelho em 1,0 BL s–1 foi 22% maior e a retenção de água foi 3% menor. Os níveis de energia bruta aumentaram 10% em todos os peixes exercitados; a retenção de água no fígado foi 6 % menor em 1,0 BL s–1; a composição de lipídio no fígado foi 29% maior do que o controle e 34% maior do que a 1,5 BL s–1; a energia bruta no fígado aumentou em 1.0 BL s–1 comparada com o controle e 2,5 BL s–1. A deposição de lipídio no músculo ventral foi 9% maior em 2,0 BL s–1. Embora alta deposição de lipídio em matrinxã tenha sido obtida em velocidades moderadas de nado, os lipídios podem ser a fonte de combustível principal para manter as exigências metabólicas de matrinxã em exercício. A melhor velocidade de nado para obter o melhor crescimento em matrinxã está entre 1,0 e 1,5 BL s–1.

Fiscal 1999 research report. Research on the long-term energy technology strategy (Basic research on the industrial technology strategy (Material technology field)); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (zairyo gijutsu bun'ya))

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This research clarifies the future social issues and targets of industrial technology in a material field including metal, inorganic, organic, polymer and fiber materials, and proposes the strategy for achieving such targets, based on research on changes in science and technology trend (technical innovation), and analysis on present and future industrial and technical competition powers. The future basic technologies for enhancing such competition powers are as follows: (1) Resource/energy-saving production process, (2) Design/evaluation technology for fine textures or in an atomic level, (3) Divergence toward high-purity and composite materials, (4) Improvement of a functionality, (5) Improvement of surface treatment technologies, and (6) Development of new materials and production technologies by using computer. The following 5 strategies are proposed based on the common understanding that the Japanese material industry achieves the best material technology innovation in the world by 2010: (1) Material technology strategy, (2) Strong cooperation among the industry, university and government, (3) Preparation of an intellectual base and a standardization strategy, (4) Reform of intellectual property rights, and (5) Resource strategy. (NEDO)

Fiscal 1999 research report. Research on the long-term energy technology strategy (Basic research on the industrial technology strategy (Material technology field)); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (zairyo gijutsu bun'ya))

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This research clarifies the future social issues and targets of industrial technology in a material field including metal, inorganic, organic, polymer and fiber materials, and proposes the strategy for achieving such targets, based on research on changes in science and technology trend (technical innovation), and analysis on present and future industrial and technical competition powers. The future basic technologies for enhancing such competition powers are as follows: (1) Resource/energy-saving production process, (2) Design/evaluation technology for fine textures or in an atomic level, (3) Divergence toward high-purity and composite materials, (4) Improvement of a functionality, (5) Improvement of surface treatment technologies, and (6) Development of new materials and production technologies by using computer. The following 5 strategies are proposed based on the common understanding that the Japanese material industry achieves the best material technology innovation in the world by 2010: (1) Material technology strategy, (2) Strong cooperation among the industry, university and government, (3) Preparation of an intellectual base and a standardization strategy, (4) Reform of intellectual property rights, and (5) Resource strategy. (NEDO)

Neonatal treatment with fluoxetine reduces depressive behavior induced by forced swim in adult rats Tratamento neonatal com fluoxetina reduz o comportameto depressivo induzido pelo nado forçado em ratos adultos

Directory of Open Access Journals (Sweden)

Cristiano Mendes-da-Silva

2002-12-01

Full Text Available Serotonin plays a role at the pathophysiology of depression in humans and in experimental models. The present study investigated the depressive behavior and the weigh evolution in adult rats (60 days treated from the 1st to the 21st postnatal day with fluoxetine, a selective serotonin reuptake inhibitor (10 mg/kg, sc, daily. The depressive behavior was induced by the forced swim test (FST. The animals were submitted to two sessions of FST: 1st session for 15 min and the 2nd session 24h later, for 5 min. During the 2nd session the Latency of the Attempt of Escape (LAE and Behavioral Immobility (BI were appraised. The Fluoxetine group when compared to the Control group, showed an increase in LAE and a decrease in BI. The neonatal administration of fluoxetine reduced the depressive behavior in adult rats, possibly by increase in the brain serotonergic activity. This alteration can be associated to process of neuroadaptation.Estudos em humanos e em modelos experimentais demonstram que a serotonina (5-HT participa da fisiopatologia da depressão. O presente estudo investigou o comportamento depressivo e a evolução ponderal de ratos adultos jovens (60 dias tratados do 1º ao 21º dia pós-natal com fluoxetina, um inibidor seletivo de recaptação da serotonina, (10 mg/kg, sc, diariamente. A depressão experimental foi induzida através do teste de nado forçado (NF. Os animais foram submetidos a duas sessões de NF, a primeira por 15 min e a segunda após 24 h, por 5 min. Durante os 5 min de NF a latência da tentativa de fuga (LTF e o tempo de imobilidade (TI foram avaliados. O grupo tratado com fluoxetina apresentou aumento da LTF e redução do TI comparado ao controle. A administração neonatal de fluoxetina reduziu o comportamento depressivo em ratos adultos, possivelmente em função do aumento da atividade serotoninérgica cerebral. Esta alteração poderá estar relacionada a processos neuroadaptativos.

Efectos sobre el sistema nervioso central del extracto etanólico y fracciones de hygrophila tyttha leonard

OpenAIRE

Ariza, Sandra Y; Rincon, Javier; Guerrero, Mario F

2008-01-01

Se evaluó en ratones albinos ICR el perfil de actividad que sobre el sistema nervioso central ejercen el extracto etanólico y las fracciones acuosa, clorofórmica, metanólica y hexánica obtenidas de Hygrophila tyttha (Acanthaceae. NV: amansamachos). Para tal fin se utilizaron pruebas destinadas a detectar posible actividad ansiolítica (laberinto en cruz elevado), antidepresiva (nado forzado), anticonvulsivante (pentilentetrazol, electrochoque) e hipnótica (potenciación de sueño inducido por pe...

Biorremediacion de suelos contaminados con hidrocarburos

OpenAIRE

Ortiz, E.; Núñez, R.; Fonseca, E.; Oramas, J.; Almazán, V.; Cabranes, Y.; Miranda, A.; Barbán, O.; Martínez, C.; Díaz, Y.; Borges, G.

2005-01-01

En la actualidad los suelos contaminados con hidrocarburos representan el 70% del total de los eco-sistemas impactados. A partir del aislamiento, selección y conservación de bacterias marinas degra-dadoras de hidrocarburos y productoras de sustancias tensioactivas se formuló un producto denomi-nado BIOIL-FC. Este producto ha sido aplicado satisfactoriamente en derrames de hidrocarburos en el mar. En el presente trabajo fue evaluada la factibilidad del uso de los procesos de biorremediación “e...

Sexualidad y transexualidad - Desafíos en la formación en pedagogía

OpenAIRE

Marques Santos, Vera Márcia; cnte

2016-01-01

Este texto defiende la urgencia de refutar la intolerancia y la discriminación, abordando reflexiones que explicitan la dinámica de una asignatura en la licenciatura:Conversando sobre la Sexualidad Adolescente. El mencio nado texto refleja el dramade profesionales de la educación, dentro del proceso de formación inicial, en la discusión del tema sexualidad en la adolescencia, especialmente, en lo que se refiere a  transexualidad, mostrando cómo estas académicas percibieron y sintieron el tema...

Quistes radiculares. Posibilidad de tratamiento endodóncico

OpenAIRE

Canalda Sahli, Carlos; Canalda Piera, Carlos

1981-01-01

Las principales complicaciones apicales y periapicales de la gan­grena pulpar, son la periodontitis apical crónica y el quiste radicular. Representan el 90 por ciento del total de lesiones apicales (BHASKAR). El 10 por ciento restante, corresponde a lesiones mucho menos habi­tuales: cementoma, absceso alveolar, quiste residual, tumor de células gigantes, etc. El tratamiento del granuloma y del quiste radicular ha evolucio­nado en el tiempo en un sentido más conservador. La existencia de una l...

Fiscal 1999 research report on long-term energy technology strategy. Basic research on industrial technology strategy (Individual technology strategy (Textile technology field)); 1999 nendo choki energy gijutsu senryku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (sen'i gijutsu bun'ya))

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This report summarizes the fiscal 1999 basic research result on industrial technology strategy of a textile technology field. Social demand and constraint in the 21st century restrict human life and industrial activity, however, include huge business chances. This technology strategy aims at construction of textile business contributing to the society, and improvement of the international competitiveness of Japanese textile industry. Analysis was made on the current international competitiveness of the textile industry in comparison between Japanese and American productivity. As factors hindering technological innovation, the following were pointed out: poor cooperation among industry, academia and government, poor cooperation among different kinds of industries, poor preparation of basic technology, knowledge base and creation base, and poor deregulation. As the future target and strategy, 7 technology targets, 2 creation targets, and every target year were showed. 4 proposals were also showed as follows: preparation of a technology base, creation base, talent education and knowledge base, and protection of intellectual property rights. (NEDO)

Fiscal 1999 research report on long-term energy technology strategy. Basic research on industrial technology strategy (Individual technology strategy). Iron and steel technology field; 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku) (tekko gijutsu bun'ya)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This report summarizes the fiscal 1999 basic research result on industrial technology strategy of a steel technology field. Japanese steel industry should correspond to requirements of the international economic society as the top runner. Although it is now difficult to suppose a basic technology innovation, stable supply of basic materials is necessary for peripheral industries. The basic raw material technology is the basis of domestic and overseas socio- economic activities. The technology development support system to retain the world-wide leadership of Japanese industries is a strategic issue. Preparation of cooperative R and D bases of industry, academia and government along a national policy is important. Strong promotion of such national projects is also essential as global environment problem, positive use of advanced information tools, development of technologies and products of unexplored fields, and development of new products and demand creation according to social needs. Such measures along social requirements are also important as raw material development to double an energy efficiency, and the policy and system to construct a recycling society and living spaces. (NEDO)

Report on achievement in researching aids for practical application of recycling technologies in fiscal 1998. Development of a technology to treat hard-to-decompose chemical substances in incineration ash; 1998 nendo recycle gijutsu nado jitsuyoka shien kenkyu seika hokokusho. Shokyakubaichu no nanbunkaisei kagaku busshitsu nado no shori gijutsu no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-05-01

This paper describes development of a technology to decompose dioxins in incineration fly ash. Experiments were carried out during fiscal 1998 by using a bench-scale plant and a laboratory-scale plant of the installed supercritical water treatment equipment designed and fabricated in fiscal 1997. With the bench-scale plant, operation methods were discussed, whereas high temperature and pressure operation of 25 MPa and a temperature internal to the reactor of 350 degrees C were achieved. An alcohol combustion test and a preliminary slurry delivery test were also performed. With the laboratory-scale plant, operating methods were discussed, and combustion tests were carried out by using different organic matters as fuels for the supercritical water oxidation reactor. Investigations were executed on the effects of reactive operation parameters on organic matter decomposition rates, produced gas compositions, and reactor wall temperatures. The intensity of hydrogen bond between solvent and water has decreased to almost half of the normal temperature and pressure water in the vicinity of the critical point. However, strong interaction still remained in terms of per unit density. A portable equipment (650 degrees C and 25 MPa at the maximum, and standard treatment quantity of dry fly ash of 1 kg/h) was operated for demonstration. Operation methods and organic matter decomposition characteristics were identified in alcohol operation and slurry operation. (NEDO)

Efeitos da música clássica como elemento de enriquecimento ambiental em Mus musculus em cativeiro (Rodentia: Muridae

Directory of Open Access Journals (Sweden)

José Geraldo Pereira da Cruz

2010-04-01

Full Text Available http://dx.doi.org/10.5007/2175-7925.2010v23n2p191 No ambiente selvagem, os animais são submetidos a mudanças constantes nos estímulos sensoriais. Entretanto, o ambiente de cativeiro é muito mais pobre em termos de estímulos fornecidos aos animais alojados no seu interior. Numa tentativa de remediar esta situação e promover um melhor bem estar, camundongos (Mus musculus foram expostos a duas condições: sem estímulos auditivos e com música clássica. Em todos os experimentos foi utilizada uma bateria de testes comportamentais. Os resultados demonstram uma diminuição significativa na imobilidade no nado forçado, aumento de entradas nos braços fechados do labirinto em cruz elevado e diminuição na imobilidade no campo aberto, nos animais que haviam sido pré-expostos anteriormente a 24h de música e sugerem que a música clássica causas mudanças na atividade motora em camundongos. Este estudo leva a conclusão que o enriquecimento do ambiente causa profundos efeitos sobre o comportamento de camundongos nos testes comportamentais e a música clássica é um método relativamente simples de contribuir para o bem estar de camundongos em cativeiro, mas pode comprometer resultados de experimentos como o nado forçado.

FY 1998 survey report. Industrial technology history/succession survey (Survey of originality and creativity of machinery technology of the Japanese industry); 1998 nendo chosa hokokusho. Sangyo gijutsu rekishi keisho chosa (kokunai sangyo kikai gijutsu no dokusosei to sozosei no chosahen)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

From a viewpoint of long-term development/creative R and D promotion of the industrial technology of Japan, this survey clarifies where there are originality/creativity for technological innovations of Japan and contributes to selecting future technical themes and working out developmental methods. Aiming at succeeding to the industrial technology, this report arranges the results of the examinational research on machinery technology legacy conducted in FY 1998. The total number of registration is 530. The items of classification are as follows: machine tool (cutting processing, plastic processing), power/energy machine (external combustion engine, internal combustion engine, fluid machine, generator/motor), traffic machine (automobile, rolling stock, ship, aircraft, bicycle), industrial machine 1 (iron/steel-making machine, casting machine, mining machine, food producing machine, woodworking machine, textile machine, paper-making machine, printing machine, chemical machine), industrial machine 2 (agriculture/forestry/fisheries machine, civil engineering/construction machine, medical machine, ceramics machine), measuring device/experimental equipment (measuring device, experimental device, design device, machine watch/calculator), machine structure (plant, bridge), etc. (NEDO)

Fiscal 1999 research report on long-term energy technology strategy. Basic research on industrial technology strategy (Individual technology strategy). Aerospace technology field (Aircraft technology field); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (kokuki gijutsu bun'ya))

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This report summarizes the fiscal 1999 basic research result on industrial technology strategy of an aircraft technology field. In an aircraft field, since the major theme is application of new technologies to new airframe development, with joining in international cooperative development of aircraft, Japanese initiative development of airframes based on the domestic market demands and profitability should be started as early as possible. Because there is no airframe development by only one country including U.S.A., Japan is profitable to unite with some overseas companies, and invest selectively in specific leading fields. Positive technical support to safety, reliability, comfort and environment harmony are also important. More important theme than establishment of elementary technologies is preparation of an integrated flight demonstration system to expand application chances of development results, and preparation of various test facilities for tests required during development activities. Application of information technologies to the whole aircraft industry, and organic cooperation between the private and public sectors are also important. (NEDO)

Fiscal 2000 research report on the research on earthquake disaster prevention technology for industrial machinery systems; 2000 nendo sangyo kikai system no boshin bosai gijutsu no chosa kenkyu hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Available technologies were extracted and technical problems were discussed in detail in connection with the above-named technology, and a technology development scenario was prepared. The study covered the subjects of an earthquake resistant disaster prevention system, ready for activation upon earthquake occurrence, with its structure designed to counter severe vibration; a real-time earthquake resistant disaster prevention system capable of ensuring system safety upon receiving earthquake occurrence information and of instantly collecting information on damage incurred; and an early restoration system to operate upon termination of earthquake. With the active utilization in mind of information technology now making a rapid progress, importance was stressed of a system under which earthquake information, disaster prevention networks, and information on the soil and geography would be linked to the database of the equipment involved. For research on the current state of earthquake disaster prevention technology, an on-site survey was conducted of the disaster prevention facilities now under construction in Hyogo Prefecture, and another survey was conducted of Shizuoka Prefecture's long-standing consideration of earthquake disaster prevention measures. Data were collected at the 5th Corporate Disaster Prevention Symposium held in San Jose, U.S. (NEDO)

Research and development of utilization technology of solar thermal system for industrial and other use. Research and development of key technology (energy conversion on technology using chemical reactions); Sangyoyo nado solar system jitsuyoka gijutsu kaihatsu. Yoso gijutsu no kenkyu (kagaku energy henkan gijutsu no kenkyu)

Energy Technology Data Exchange (ETDEWEB)

Takita, M [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

1994-12-01

Described herein are the results of the FY1994 research program for energy conversion technology using chemical reactions by the aid of solar energy. The demonstration runs were conducted by a bench-scale unit, which was operated stably for 100h, to produce promising results. The catalyst exhibits stable performance, without showing a sign of deactivation. It is found that the heat pump system works well, without being interfered with accumulated by-products. A heat of approximately 2,100kcal/h is recovered. It is confirmed that steam of 150{degree}C and 200{degree}C is generated from hot water of 80{degree}C and 95{degree}C, respectively. The bench-scale runs show a thermal efficiency of around 10%, which is lower than the target level. However, the runs with hydrogen-occluding alloy attain a process thermal efficiency of 30%. The system in which solar collector and chemical heat pump units are combined is evaluated with respect to its economic efficiency and operability for its eventual commercialization. 6 figs., 2 tabs.

Fiscal 1999 research and verification of geothermal energy exploring technologies and the like. Development of reservoir change prediction technology (Development of modelling support technology); 1999 nendo chinetsu tansa gijutsu nado kensho chosa hokokusho (yoyaku). Choryuso hendo tansaho kaihatsu (choryuso hendo yosoku gijutsu (modeling shien gijutsu))

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The aim is to develop and popularize techniques relating to geological information such as thermal history. The efforts center about the application of a now-available core fracture measuring system to developed geothermal fields and about the development of new technologies. The measuring system is applied to some core cuttings collected from five boreholes in the Akinomiya district, Akita Prefecture, and the system is used for (1) the evaluation of homogenization temperatures of inclusions in the fluid, (2) the measurement of the points of melting from ice of inclusions in the fluid, and (3) the implementation of laser Raman spectroscopy. Under item (1), it is found that the minimum homogenization temperature of quartz phenocryst in the mother rock or of low-salinity fluid inclusion in a quartz vein is near the current subsurface temperature and that subsurface and reservoir temperatures may be known by evaluating their homogenization temperature. Under item (2), it is found that the NaCl equivalent salinity is distributed in the range of 0.0 to 25wt% and that, in this connection, there is difference between a fluid in a fluid flow and a fluid spurting as thermal water in the Akinomiya district. Under item (3), CO2, N{sub 2}, and CH{sub 4} are detected in most of the boreholes. Efforts are exerted to develop a hydrothermal fluid analyzing technique using a rapid rock dating method and traces of chemical ingredients in hydrothermal minerals. (NEDO)

Fiscal 1999 research report on long-term energy technology strategy. Pt. 2. Basic research on industrial technology strategy (Individual technology strategy.) Material technology field (Fine ceramics); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. 2. Sangyo gijutsu senryaku sakutei kiban chosa (bun'ya betsu gijutsu senryaku) zairyo gijutsu bun'ya (fine ceramics gijutsu bun'ya)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This report summarizes the basic research result on industrial technology strategy for a glass field. Japan is facing such various economic problems as attack by developing countries, collapse of economic babble and yen's appreciation, and environment problems over a period of several years, and a glass industry is also under the influence of such problems. For continuous development of Japan and improvement of the international competitiveness of Japan, development of a glass industry is essential. Both co- possession of technical issues by cooperation of the members, and breakdown of conventional structures of the industry are necessary. Clarification of technical issues, and cooperation of industry, academia and government is essential. The current state, promise and issues of domestic and overseas glass technology and its R and D are described. The joint target of an industrial strategy for researchers and engineers of every sector, and the approach to such target are showed from the viewpoint of the issues for Japan and preparation of common basic technology. The role of each sector for environment preparation and policy is described to achieve the target. (NEDO)

Robot performing heavy gymnastics. Kikai taiso wo suru robot

Energy Technology Data Exchange (ETDEWEB)

Takashima, S. (Hosei Univ., Tokyo (Japan). Faculty of Engineering)

1991-11-01

Methods of simulation of the motion of human bodies and the control of the motion of bobots are sdudied in order to realize robots to perform gymnastics on a horizontal bar. A model of the human body structure is presented by dividing the human body into 8 parts: right and left arms, the head, the trunk, the right and left thighs, and the right and left foot, and a system is constructed by combination of the links of the rigid partswith an assumption on each link for simplification. A method to enhance the swing motion is devised in order to produce a suspension motionaas a basic movement of horizontal bar gymnastics. The basic condition to control the horizontal bar gynnastics and the control system of an articulation angle are considered. Two algorithms are presented in order to enhance the swing motion and to maintain suspension swing: excitation of the swing by a vertical motion of the center of gravity and excitation by the use of natural frequency. Computer simulation of suspension swing is executed and the results are shown in a figure. A prototype robot to perform horizontal bar gymnastics is manufactured and performs suspension swing, starting of swing, kip motion and giant swing. The concept of optimization is not included concretely in the prototype. 22 refs., 8 figs.

Psiconeuroendocrinologia do transtorno de estresse pós-traumático

OpenAIRE

Ruiz,Juliana Elena; Barbosa Neto,Jair; Schoedl,Aline Ferri; Mello,Marcelo Feijo

2007-01-01

OBJETIVO: Os autores realizaram uma revisão tradicional da literatura sobre os achados neurobiológicos das disfunções do eixo hipotálamo-pituitária-adrenal associados ao transtorno de estresse pós-traumático. MÉTODO: Os achados científicos relevantes foram descritos de acordo com a ordem cronológica de publicação e as características dos estudos, se eram pré-clínicos, relacio-nados à violência precoce como fator de risco e, finalmente, achados clínicos em pacientes portadores de transtorno de...

Breve historia reglamentaria del estilo pecho

OpenAIRE

Britez, Julián

2013-01-01

La natación a nivel mundial se ha convertido en un espectáculo único acaparando la mirada de todos durante los Juegos Olímpicos y Mundiales, esto ha sido sostenido principalmente por la pulverización constante de records. El estilo Pecho o Braza, es considerado el más lento de los cuatro estilos de nado reconocidos por la Federación Internacional de Natación. Pero con el avance de los años, la organización rectora de la natación a nivel mundial ha ido incorporando cambios y modificaciones con...

FY 2000 report on the survey on the long-term energy technology strategy. Fundamental survey to work out industrial technology strategies (technology strategy by field - material technology field); 2000 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (zairyo gijutsu bun'ya))

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For the purpose of constructing the material technology strategy, conducted were study of the trend of technical development, arrangement of material technology seeds, and survey of the R and D environment. Concretely, the paper carried out the grasp of the national projects related to materials in Europe and the U.S., patent registration (U.S.-Japan comparison)/application (Europe/Japan), transfer of technology trade, and survey of the trend of papers made public in scientific magazines. Further, in the survey of the R and D environment, conducted were how to treat researchers/engineers, how to handle intellectual ownership, system to promote the cooperation among industry/university/government, and comparison among countries in policies of technology such as patent strategy. The results of the survey were classified into the following 4 items: 1) trend of the technical development in the material technology field; 2) developmental environment in the material technology field; 3) competitive force in the material field and material user needs/seeds maps; 4) proposal for the material technology strategy. As to the competitive force of material technology in 3), the paper took up organic/polymer, iron/steel, aluminum, semiconductor, and ceramic materials. (NEDO)

Fiscal 1999 survey report on long-term energy technological strategies and the like. Long-term energy technological strategy survey (Medium-term energy technological strategy survey); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Choki energy gijutsu senryaku chosa (chuki energy gijutsu senryaku chosa)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Energy strategies to be implemented under the New Sunshine Program by around 2010 have been compiled, with nation's industrial technological strategies, long-term energy outlook, and the like taken into consideration. The present survey aims to work out medium-term energy technological strategies. In Chapter 2, by conducting studies on the state of energy strategies in the national industry technological strategies as primarily compiled, long-term energy supply and demand outlook, and the history so far of the New Sunshine Program, and social conditions surrounding energy/environmental technologies and energy conditions are arranged in order and then analyzed with a view to deriving social needs. In Chapter 3, in view of the derived social needs, medium-term energy technological strategies are broken down into strategic target details, based on the important regions and major and minor strategic targets of the national industry technological strategies. In Chapter 4, medium-term energy technological strategies are worked out. In Chapter 5, 'basic ideas,' 'measures for promoting technology development,' 'return of the fruits to society' are mentioned as the methods of realizing the strategies. In Chapter 6, surveys and researches are summarized, and future development is predicted. (NEDO)

Fiscal 1999 survey report on survey of long-term strategy on energy technology. Long-term energy technological strategy survey (Long-term energy technological strategy survey); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Choki energy gijutsu senryaku chosa (choki energy gijutsu senryaku chosa))

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

To enhance still more effectively the research and development of energy-related/environmental technologies, research and development strategies have to be worked out from a long-term view point and policy resources such as investment in research and development should be optimally distributed after clarifying and defining the course to follow toward the achievement of research and development goals. This project aims to conduct studies, and to show the course to follow in the future, towards the establishment of a long-term energy technological strategy by investigating energy systems for around 2050, interim energy systems at the intermediate stage, and innovative energy technologies for realizing such energy systems. In Chapter 1, the position of the survey and its purpose and prerequisites are shown. In Chapter 2, the history of social and economic conditions surrounding energy/environmental technologies and of energy situation up to the present time is compiled, and the outlook is analyzed and predicted. In Chapter 3, formulation of a long-term energy technological strategy is discussed. In Chapter 5, how to embody such a strategy is shown. (NEDO)

Fiscal 1999 survey report on long-term energy technological strategies and the like. Long-term energy technological strategy survey (Medium-term energy technological strategy survey); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Choki energy gijutsu senryaku chosa (chuki energy gijutsu senryaku chosa)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Energy strategies to be implemented under the New Sunshine Program by around 2010 have been compiled, with nation's industrial technological strategies, long-term energy outlook, and the like taken into consideration. The present survey aims to work out medium-term energy technological strategies. In Chapter 2, by conducting studies on the state of energy strategies in the national industry technological strategies as primarily compiled, long-term energy supply and demand outlook, and the history so far of the New Sunshine Program, and social conditions surrounding energy/environmental technologies and energy conditions are arranged in order and then analyzed with a view to deriving social needs. In Chapter 3, in view of the derived social needs, medium-term energy technological strategies are broken down into strategic target details, based on the important regions and major and minor strategic targets of the national industry technological strategies. In Chapter 4, medium-term energy technological strategies are worked out. In Chapter 5, 'basic ideas,' 'measures for promoting technology development,' 'return of the fruits to society' are mentioned as the methods of realizing the strategies. In Chapter 6, surveys and researches are summarized, and future development is predicted. (NEDO)

Status and application of α-spectrometric 230Th/234U dating of fossil corals in Ryukyus, Japan and the Philippines

International Nuclear Information System (INIS)

Inagaki, Miyuki; Omura, Akio; Sasaki, Keiichi

2007-01-01

High-precision α-spectrometric 230 Th/ 234 U dating was achieved by recent improvements of measurement system and chemical procedures and enabled critical evaluation of age reliability. We review the status and application of α-spectrometric 230 Th/ 234 U dating of Pleistocene and Holocene corals to reconstruct past sea level changes and tectonic movements in Ryukyus, southwestern Japan and the Philippines in the western rim of circum-Pacific island arcs. The highest terrace in Kikai Island was formed during MIS 5c not MIS 5e that previously reported. Coral reef sediments deposited not only during MIS 5e but also during glacial periods, e.g. MIS 6 and 2, have been found in the Ryukyus. Coral reef sediments formed during MIS 2 were found at ca. 120 m below present sea level off Irabu Island located at 25degN. In addition, it was clear that three terraces developed during MIS 5e, 5c and 5a at Pamilacan Island on the Philippines. (author)

Prevalência de dor nos nadadores de São Vaetano do Sul

Directory of Open Access Journals (Sweden)

Bárbara Oliveira Venâncio

2012-12-01

Full Text Available OBJECTIVE: A natação é um esporte que vem se destacando nos últimos anos, sendo reconhecido que requer um elevado nível de treinamento e que gera sobrecarga musculoesquelética, a qual predispõe os nadadores a lesões. OBJETIVO: Verificar a prevalência e as regiões corporais com dor, correlacionando com o estilo principal e o tempo de prática nos nadadores do SERC em São Caetano do Sul. Método: Aplicação de um questionário com 19 perguntas em 71 atletas, sendo 30 do sexo feminino e 41 do masculino, nas categorias petiz (10 a 12 anos, infantil (12 a 14 anos, juvenil (14 a 16 anos, júnior (16 a 18 anos e sênior (a partir dos 18 anos. As variáveis foram analisadas pelo teste de igualdade de duas proporções e Mann-Whitney. RESULTADOS: A prevalência de dor foi de 74,6% (n = 53; p < 0,001, sendo 39,6% (n = 21 no ombro e 22,6% (n = 12; p = 0,059 na coxa e o nado costas foi o único estilo que não apresentou correlação com a dor (p = 1,000, bem como com o tempo de prática (p = 0,075. CONCLUSION: Na população estudada houve alta prevalência de dor, sendo as regiões do ombro e da coxa as mais acometidas, não tendo correlação nem com o nado costas e tampouco com o tempo de prática esportiva.

Fiscal 2000 collection of manuscripts for technology development committee on hydrogen energy and the like; 2000 nendo suiso energy nado kanren gijutsu kaihatsu iinkai yokoshu

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-07

The subjects listed in the collection are (1) the research and development of international clean energy system technology utilizing hydrogen (WE-NET - World Energy Network), including the outline of the project as a whole; research on system evaluation; research and development of safety measures; development of technologies for liquid hydrogen transportation and storage; research on low-temperature materials; development of hydrogen supply station and hydrogen-driven automobile system; development of supply station for hydrogen produced by electrolysis of water; development of hydrogen fuel system; development of hydrogen production technology; development of hydrogen absorbing alloys for dispersed hydrogen transportation and storage; development of polymer electrolyte fuel cell fed with pure hydrogen; and the development of power generation technology, (2) the development of closed type high-efficiency turbine technology capable of carbon dioxide recovery, and (3) the development of frontier technology of carburation using sensible heat in coke oven gas. (NEDO)

Survey of the waste-fueled power generation introducing technology. Case study 1 (fiscal 1996); Haikibutsu hatsuden donyu gijutsu chosa nado. Case study no jisshi 1

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

A case study on A city was conducted aiming at making a detailed manual for introducing the waste-fueled power generation. The study was made in terms of a large-capacity waste-fueled power plant, estimation of the waste amount considering wide-area processing, size of facilities, comparison of four types of combustion furnace, steam condition/seawater cooling/power generating efficiency, etc. As a result, the following were proposed: As to the size of facilities, a capacity as large as possible is recommended in the light of the scale merit of costs of the waste-fueled power plant and final disposal site and the environmental preservation. Concerning the high efficient power generation, recommended are 450degC and 60-80 ata which are steam conditions for coping with high temperature corrosion. In respect to seawater cooling, the adoption is recommended making good use of locational conditions since the output energy increases by approximately 16%. Any furnace types including the fluidized bed furnace are equal. The amount of dioxin becomes below 0.1ng/Nm{sup 3} because of the control of furnace combustion temperature, residence time, catalytic desulfurization facilities, blowing of activated coal into the flue, etc. 172 figs., 78 tabs.

FY1998 research report on the R and D on recycling technology. Part 1; 1998 nendo recycle nado kankyo gijutsu kekyu kaihatsu seika hokokusho. 1

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

This project aims to develop recycling technology for reduction of environmental burden caused by waste, and promotion of recycling of wastes. As for advanced recycling technology for PET bottles, the facility was improved for improvement of a facility operability and product quality. Study was made on the effect of a raw bale quality and recycled flake colors on a product quality, the forming test with PS or PET labels, and the concentration and effect of washing liquid circulated in flake washing process. As for recycling technology of hard-to-dispose waste plastics, facility improvement and demonstration test were made for continuous operation of dry-distillation/gasification of shredder dusts and separation of nonferrous metals and glass. Study was also made on pulverizing and recycling technologies of FRP bath tubs, and such pulverization costs were estimated. As for production technology of chemical feed and fuel from wastes, study was made on removal technology of non-flammable substances, development of alkaline additives, reacting condition, development of reactors, and use technology as chemical feed. (NEDO)

FY1998 report on the research on support for practical recycling technologies. Part 1; 1998 nendo recyle gijutsu nado jitsuyoka shien kenkyu seika hokokusho. 1

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

This project aims at development, demonstration and utilization of waste recycling technologies. This report summarizes the fiscal 1998 results. The test/demonstration plant for separation and removal of foreign materials was constructed for effective use of waste building wood, and its optimum operation condition was studied. Although some foreign materials exists, 90% of waste building wood chips were separated and recovered through some improvements for the plant. An advanced separation technology is expected. As for fibering technology, fibers with target compression strength were obtained from cedar chips through a disintegration experiment using a newly developed refiner plate. Although the compression strength of fibers obtained from waste building wood chips was slightly poor, it is attained by increasing the target specific gravity of light- weight wooden materials by nearly 10% from 0.1. As for fiber orientation technology, as the tension of a forming belt was adjusted to achieve sufficient width compression, nearly 90% of the target compression strength was attained. A width compression method remains to be solved. (NEDO)

Reação entre a performance em natação e variáveis de força em seco. Um estudo piloto em nadadoras de nível nacional.

OpenAIRE

Amaro, Nuno

2012-01-01

Este trabalho apresenta uma revisão em torno das questões das manifestações de força em seco e sua relação com a performance de nado. Adicionalmente, foi realizado um estudo piloto para avaliação de procedimentos e metodologias a utilizar em situação de avaliação e controlo de treino. Da revisão da literatura é possível verificar que poucos são os estudos existentes que demonstrem a importância de um programa de treino em seco como complementar ao treino em água. São detetadas ...

A relação entre performance em natação e variáveis de força em seco : um estudo piloto em nadadoras de nível nacional

OpenAIRE

Amaro, Nuno Miguel Pires Alves

2012-01-01

Este trabalho apresenta uma revisão em torno das questões das manifestações de força em seco e sua relação com a performance de nado. Adicionalmente, foi realizado um estudo piloto para avaliação de procedimentos e metodologias a utilizar em situação de avaliação e controlo de treino. Da revisão da literatura é possível verificar que poucos são os estudos existentes que demonstrem a importância de um programa de treino em seco como complementar ao treino em água. São detetadas ...

Report on the FY 1999 survey on long-term energy technology strategy/basic survey for working out industrial technology strategy. Technology strategy by field - material technology field (nonferrous metal field); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (zairyo gijutsu bun'ya (hitetsu kinzoku bunya)))

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The paper described the results of the survey of the nonferrous metal field relating to the FY 1999 long-term energy technology strategy. The needs for electronics products are increasing toward the 21st century. Domestically the competition with other countries in enlarging the market share has been intensifying. At the same time, the smaller the size of device becomes, the more the barriers in technology to be overcome increase. In the development of Si wafer to cope with such a situation, there are a lot of problems to be broken down in liaison with industry/government/university. Compound semiconductors are higher in speed than Si, and have a marked feature of producing light, but are difficult in crystal growth. It was in the past 20 years that the development of commercialization technology has rapidly advanced. Compound semiconductors are indispensable as a device in the energy problem which strongly influences the global environment. In the U.S., for the military use, a policy for upbringing national industries has been carried out since 1993. The role of compound semiconductor materials playing as the fundamental industry which supports the semiconductor industry and system industry as the nation's core industries is important even in Japan the same as in the U.S. (NEDO)

Fiscal 1998 R and D project on global environmental industrial technology. Research result report on DNA analysis and information processing technology for photosynthesis microorganisms (Development of CO{sub 2} fixation and effective use technology by using bacteria and algae); 1998 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo. Kogosei biseibutsu nado DNA kaiseki joho shori gijutsu no kenkyu (saikin sorui nado riyo nisanka tanso koteika yuko riyo gijutsu kaihatsu) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

This report summarizes the fiscal 1998 research result on DNA analysis and information processing technology for photosynthesis microorganisms. On the study on DNA analysis technology by triple-strand formation method, as the comparison study result of a READ method, stable triple- strand formation method and hairpin method, a READ method showed the highest triple-strand formation efficiency for target DNA. On the study on accurate separation technology of specific genes, establishment of protocols was promoted for solid-phase probe technology, subtract technology and leveling technology. On the study on DNA microarray analysis technology by high-efficiency hybridization method, the analysis technology of genes by hybridization method using DNA chips is under investigation. In addition, the high- efficiency analysis technology of specific DNA segments by using an affinity sensor, and the high-accuracy cloning technology for DNA with altered primary structure were also studied. (NEDO)

New alloys for structural application. Kikai kozoyo shin kinzoku zairyo

Energy Technology Data Exchange (ETDEWEB)

Suzuki, T [Kogakuin Univ., Tokyo (Japan)

1993-01-15

As recent advance on the scientific technologies is amazing, the materials having new function or excellent performance have been developed. Speaking on some recent examples, they can be divided roughly to one group belonging to invention of materials themselves such as oxide superconductors and compounds semi-conductors, and the other belonging to the products as invention of epoc-making material manufacturing methods such as noncrystalline alloys and particle dispersion reinforced alloys (ODS). In this report, first, some new metallic materials introduced relatively recently and converting many technical innovations in wide range of machinery field, such as titanium alloys, refractory alloys having nickel group, aluminium-lithium alloys, HSLA steels composed of reduced weight of alloy elements and having higher strengths than those of carbon-steels and various properties, intermetallic materials such as Ni3Al and others are described, and next, mechanical alloying and its particle dispersion reinforced alloys, liquid phase rapid cooling process and its noncrystalline alloy-rapid cooling cohesion powder sintering alloys, and others are summarized under the paths from their birth to present status. 31 refs., 12 figs., 5 tabs.

Fiscal 2000 achievement report. Development of technologies for waste treatment and recycling (Development of technologies for appropriate treatment of air bags); 2000 nendo haikibutsu recycle kanren gijutsu kaihatsu seika hokokusho. Air bag tekisei shori gijutsu no kaihatsu nado

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

A centralized treatment process respecting environmental protection and safety for unused air bags aboard disused automobiles is developed. In concrete terms, a heating facility owned by Daicel Chemical Industries, Ltd., is used, which includes an apparatus for examining exhaust gas dioxins and an exhaust gas treatment apparatus and, with this facility, studies are made for appropriately treating waste gas and waste water to be generated when air bag modules undergo centralized heating. Endeavors in fiscal 2000 center about (1) the development of waste gas treatment technologies, (2) development of waste water treatment technologies, (3) chemical analysis of waste water sludge, dusts and air bag residues, and (4) the study of appropriate treatment of non-azide air bag modules. As to the development of exhaust gas treatment technology, it was proved that the exhaust gas treatment system consisting of secondary incineration furnace, exhaust gas cooling tower and bag filter worked effectively. (NEDO)

Fiscal 1998 achievement report. Research and development of simplified dioxin analyzing technology, etc.; 1998 nendo dioxin kan'i bunseki gijutsu nado kenkyu kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

A simplified method is developed, which measures dioxins in flue gas without using GC/MS (gas chromatography/mass spectrometry) of the double focusing type. The sampling device is built of two collecting bottles, containing water and diethylene glycol, and uses no XAD-2 (cross-linked amberlight divinyl benzene) resin. Such a design does not need time consuming Soxlet extraction in the sampling process and shortens the processing time. An HPLC (high performance liquid chromatography) system replaces the convenient column chromatography system in the cleanup process, and this enables automation and rapid treatment. For the measurement of toxicity equivalent, GC/MS is used to separate and quantify 17 kinds of toxic isomers as in the conventional method. The GC/MS is of the quadruple focusing type, however, and this reduces the device cost at the initial stage and shortens the time for operators to acquire the skills of maintenance and operation. Though the quadruple focusing type is inferior to the double focusing type in sensitivity, the shortcoming is compensated for by massive specimen injection using a PTV (programmable temperature vaporizer). The result of a JIS (Japanese Industrial Standard) method and the result of this newly developed method are found to agree excellently with each other. This method is simple and efficient, suitable for use in the analysis of small incinerator flue gas. (NEDO)

Os primeiros reis-de-armas do Brasil

Directory of Open Access Journals (Sweden)

Rui Vieira da Cunha

1963-12-01

Full Text Available A filiação direta dos arautos aos fetiales romanos (1 é negada pela pesquisa moderna, embora longe de dissipar as som-bras envolventes de suas origens (2 . Referidos nos poemas de Chrétien de Troyes, circa 1170, aparecem vinculados aos tor-neios e, pelos meados do século XIV, erravam à busca de onde prestar seus serviços, salvo uns poucos felizardos que estavam incluídos na casa de grandes senhores . Nesse último grupo, alguns, com autoridade sôbre os companheiros, eram denomi-nados reis, apelativo escolhido para significar, à época, análo-ga preeminência entre os menestréis, os devassos, os mendigos.

La investigación en biomecánica aplicada a la natación olímpica: Evolución histórica y situación actual

OpenAIRE

Llana Belloch, Salvador; Priego Quesada, José Ignacio; Pérez Soriano, Pedro; Lucas Cuevas, Ángel

2013-01-01

A lo largo de los años, los records mundiales en natación han mejorado de forma notable respecto a otros deportes. Esto se ha debido, tanto a la mejora de la condición física de los nadadores como a la evolución de las técnicas de nado. Gran “culpa” de esto se debe al avance científico en el que se ha visto inmerso este deporte. El presente trabajo tiene como objetivo presentar de una forma organizada y coherente la evolución histórica de la investigación en biomecánica aplicada a la natación...

Japanese guideline for the oncology FDG-PET/CT data acquisition protocol. Synopsis of Version 2.0

International Nuclear Information System (INIS)

Fukukita, Hiroyoshi; Suzuki, Kazufumi; Matsumoto, Keiichi; Terauchi, Takashi; Shimada, Naoki; Daisaki, Hiromitsu; Ikari, Yasuhiko; Senda, Michio

2014-01-01

This synopsis outlines the Japanese guideline Version 2.0 for the data acquisition protocol of oncology FDG-PET/CT scans that was created by a joint task force of the Japanese Society of Nuclear Medicine Technology, the Japanese Society of Nuclear Medicine and the Japanese Council of PET Imaging, and was published in Kakuigaku-Gijutsu 2013; 33:377-420 in Japanese. The guideline aims at standardizing the PET image quality among PET centers and different PET camera models by providing criteria for the IEC body phantom image quality as well as for the patient PET image quality based on the noise equivalent count (NEC), NEC density and liver signal-to-noise ratio, so that the appropriate scanning parameters can be determined for each PET camera. This Version 2.0 covers issues that were not focused on in Version 1.0, including the accuracy of the standardized uptake value (SUV), effect of body size together with adjustment of scanning duration, and time-of-flight (TOF) reconstruction technique. Version 2.0 also presents data acquired with new PET camera models that were not tested in Version 1.0. Reference values for physical indicators of phantom image quality have been updated as well. (author)

FY 1999 report on the development of technology to recycle architectural waste materials, glass, etc. Development of technology to recycle architectural waste materials; 1999 nendo kenchiku haizai glass nado recycle gijutsu kaihatsu seika hokokusho. Kenchiku haizai recycle gijutsu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-09-01

Waste wood materials in the materials discharged from architectural disassembly were regarded as a potential wood resource, and the R and D of the technology to recycle these were conducted. Studies were made on the technology to finely grind waste wood materials, technology to compress/form waste wood materials and ground wood powder, verification of strength characteristics/dimension stability of the formed wood materials, etc. As to the wood materials which were badly degraded under ultra violet rays, they were coloring-processed by the steam treatment, and a possibility of coating substitution was confirmed. In relation to the technology to produce compressed wood materials, the optimization of heat treatment conditions was experimentally conducted. About the technology to give dimensional stability, dimensional stability was improved as a result of the improvement of chemicals feeding and the development of chemically processed drugs. In the development of light formed products, the board was successfully formed which is light in weight using lignocelluloses/inorganic hydrates and has the bending strength higher than that of the plaster board. In the development of interior materials, the technology was developed in which ground wood powder and thermo-plastic resin are mixed for die molding, and the OA floor using this was commercialized. (NEDO)

FY 1999 New Sunshine Project survey research project - Survey on the long-term energy technology strategy, etc. Fundamental survey to decide on the industrial technology strategy - Technology strategy by field (Aerospace technology field - Airplane technology field); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (koku uchu gijutsu bun'ya (kokuki gijutsu bun'ya)))

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The survey/study were conducted to contribute to proposing technology strategies such as the analysis of the present state of technical competitive force and the forecast in the airplane technology field. In future airplane industry, to meet the requests/restrictions from the society in the international airplane industry in the recent years, it is predicted that technology innovation will advance centering on the following four fields: next generation airplane technology to enable the innovative cost reduction in development/production, technology to realize the substantial reduction in flight cost of airline, technology to enhance reliability for the next generation flight which meets the multi-frequency flight/increasing demand for small plane, and airplane frontier technology. Moreover, regulations especially on noise, CO2 reduction and NOx reduction are becoming very strict internationally because of the increasing concern about global environmental problems. It is urgently needed to establish technology to cope with these trends. As the comprehensive strategy, the following are considered: development of airframe under the leadership of Japan and securing of the demand, efficient arrangement and operation of large-scale experimental facilities, IT adoption to the airplane industry, organic cooperation by industry/university/government, etc. (NEDO)

Report on survey in fiscal 2000 on the survey on succession of history of industrial technologies. Survey edition of originality and creativity of industrial machine technologies in Japan; 2000 nendo sangyo gijutsu rekishi keisho chsao hokokusho. Kokunai sangyo kikai gijutsu no dokusosei to sozosei noc hosahen

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

In order to clarify the innovation process of industrial technologies in Japan and the originality and creativity seen in the process, the case history has been introduced in relation with the researchers, engineers, and business proprietors having contributed to the innovation, and their work records. With regard to machine tools, detailed introductions were given to 'Toshisuke Takeo' who had the technological concept learned in the United States, and devoted himself in building modern machine tools, an American, 'Willian R. Gorham', who had worked actively in Japan even during the war, 'Hiroshi Hanaoka' who had made a machining center for the first time in Japan, and 'Shinkichi Nagaoka' a developer of the non-circular flat bearing. In the railway area, 'Richard Francis Trevithick' and 'Francis Henry Trevithick' , leaders of the rolling stock manufacturing technologies, 'Yasujiro Shima' who had contributed to building the foundation of the Japan's rolling stock technologies, 'Kiichi Asakura' who had contributed to establishment of the Japan's rolling stock technologies and industry standardization, and 'Hideo Shima' who had borne fruit of systematization of the Japan's railway technologies by building the Shinkansen were introduced in detail. (NEDO)

Fiscal 1997 report of the verification research on geothermal prospecting technology. Theme 5-2. Development of a reservoir change prospecting method (reservoir change prediction technique (modeling support technique)); 1997 nendo chinetsu tansa gijutsu nado kensho chosa. 5-2. Choryuso hendo tansaho kaihatsu (choryuso hendo yosoku gijutsu (modeling shien gijutsu)) hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

To evaluate geothermal reservoirs in the initial stage of development, to keep stable output in service operation, and to develop a technology effective for extraction from peripheral reservoirs, study was made on a reservoir variation prediction technique, in particular, a modeling support technique. This paper describes the result in fiscal 1997. Underground temperature estimation technique using homogenization temperatures of fluid inclusions among core fault system measurement systems was applied to Wasabizawa field. The effect of stretching is important to estimate reservoir temperatures, and use of a minimum homogenization temperature of fluid inclusions in quartz was suitable. Even in the case of no quartz in hydrothermal veins, measured data of quartz (secondary fluid inclusion) in parent rocks adjacent to hydrothermal veins well agreed with measured temperature data. The developmental possibility of a new modeling support technique was confirmed enough through collection of documents and information. Based on the result, measurement equipment suitable for R and D was selected, and a measurement system was established through preliminary experiments. 39 refs., 35 figs., 6 tabs.

FY 1999 report on the results of the superconductive energy application technology development/research on a total system, etc. Survey of potentiality of the commercialization of superconductive technology, effects of the introduction, etc. (Future course of the superconductive technology development in Japan); 1999 nendo chodendo denryoku oryokuyo gijutsu kaihatsu total system nado no kenkyu. Chodendo gijutsu no jitsuyoka kanosei oyobi donyu koka nado no chosa (Nippon ni okeru chodendo gijutsu kaihatsu no kongo no hokosei)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

By the use of superconductive technology, the following are aimed at: marked reduction in power loss of electrical equipment and power transmission path, and size/weight reduction in electrical devices by high current/magnetic flux density. The superconductive technology has advantages such as great energy saving effect, CO2 reduction and global environmental preservation. As an example, concerning the superconductive generator now being developed under the New Sunshine Project, power loss can be reduced by half, and by the use of high magnetic field, size/weight can be reduced such as reduction in rotor diameter and reduction in weight by half. Further, as an innovative system, cited are the superconducting magnetic energy storage system (SMES) and flywheel energy storage system. The superconducting magnetic levitation railway, medical use MRI, etc. have also innovativity which is difficult to get in the conventional technology. Effects are also expected of introducing the process development using superconducting magnet such as magnetic separation, electromagnetic metallurgy, electromagnetic agitation and monocrytal growth convection control. Also cited is Josephson electronic device. High performance SQUID in bio-magnetic/non-destructive inspection is also expected to be developed. (NEDO)

FY 1997 R/D project of industrial and scientific technologies contracted with NEDO. Report on technology development of utilization of biological resources such as bioconsortia (development of analytical techniques of bioconsortia); 1997 nendo sangyo gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Fukugo seibutsukei nado seibutsu shigen riyo gijutsu kaihatsu (fukugo seibutsukei kaiseki gijutsu no kaihatsu) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Bioconsortia are microbial composites composing of more than two kinds of microorganisms with special functions. To utilize their advanced functions, some techniques have been developed for analyzing their functions and interactions, and for identification, separation and incubation of the constituent microbial groups. In FY 1997, an investigation was made on technology trends, domestic researchers, and research topics related to bioconsortia. To manage and promote the progress of research at the National Institute of Bioscience and Human-Technology where the centralized management of this project is conducted, meetings are held once a month to examine the progress at the institute, in which reports are made and discussions are held on how each research item is progressing. In addition, meetings of the committee to promote research are held every other month to consider and examine measures required for promoting the research. Re-entrustment of research has been made on two subjects, i.e., `Studies on biological significance of symbiotic microorganisms` by Prof. Ishikawa of the University of Tokyo, and `Study on the relationship between the biosynthesis of useful terpenic materials of plant origin and the differentiation of plant tissues, and their effective production by plant cell cultures` by Prof. Inoue of Gifu Pharmaceutical University. 27 refs., 13 figs., 1 tab.

Report on the FY 1999 survey on long-term energy technology strategy/basic survey for working out industrial technology strategy. Technology strategy by field - material technology field (nonferrous metal field); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (zairyo gijutsu bun'ya (hitetsu kinzoku bunya)))

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The paper described the results of the survey of the nonferrous metal field relating to the FY 1999 long-term energy technology strategy. The needs for electronics products are increasing toward the 21st century. Domestically the competition with other countries in enlarging the market share has been intensifying. At the same time, the smaller the size of device becomes, the more the barriers in technology to be overcome increase. In the development of Si wafer to cope with such a situation, there are a lot of problems to be broken down in liaison with industry/government/university. Compound semiconductors are higher in speed than Si, and have a marked feature of producing light, but are difficult in crystal growth. It was in the past 20 years that the development of commercialization technology has rapidly advanced. Compound semiconductors are indispensable as a device in the energy problem which strongly influences the global environment. In the U.S., for the military use, a policy for upbringing national industries has been carried out since 1993. The role of compound semiconductor materials playing as the fundamental industry which supports the semiconductor industry and system industry as the nation's core industries is important even in Japan the same as in the U.S. (NEDO)

FY 1999 New Sunshine Project survey research project - Survey on the long-term energy technology strategy, etc. Fundamental survey to decide on the industrial technology strategy - Technology strategy by field (Fiber technology field); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (sen'i gijutsu bun'ya))

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The survey/study were conducted to contribute to proposing technology strategies such as the analysis of the present state of technical competitive force and the forecast in the fiber industry technology field. For the fiber industry to meet the requests from the society in the 21st century and to develop as an industry, it is necessary to achieve the technology innovation by making use of technology and recreation. As important seeds for which the Japanese fiber industry should focus efforts, the following were cited: To double the strength of general-purpose polymer synthetic fiber; To add the environmental control function by gradient functionalization; To practically use the environmental harmony type nonaqueous working process; To develop the fiber environmentally friendly and fiber working process; To give sensor functions such as temperature-humidity sensitive function; To develop petroleum substituting fiber materials; To develop separation/decomposition technology and reproduction technology of composite materials; etc. Further, in the recreation field, the paper cited the arrangement of intellectual property protection/design property preservation, and the promotion of commercial base making and strengthening of life style proposals. (NEDO)

Achievement report for fiscal 2000 on development of technologies to reduce pollutants in oil refining; 2000 nendo sekiyu seisei osen busshitsu teigen nado gijutsu kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Research and development has been made on technologies to reduce sulfur content in light oil and on optimization of light oil quality. This paper summarizes the achievements in fiscal 2000. In the study of enhancing the desulfurization rate in gas oil deep hydrodesulfurization process, it was found that NiHY zeolite having Ni introduced by using the ion exchange method shows stable activity, whereas the target of sulfur content of 50 ppm or lower was achieved by adding the third constituent and by optimizing the impregnation solution to pH3. In the study of the Ni, Mo/alumina catalyst, the desulfurization activity was enhanced by optimization of carrier pore size to 120 to 140 angstroms and by addition of phosphorus and silica, having the target of sulfur content of 50 ppm or lower achieved. In the research of manufacturing low-sulfur light oil using heavy oil desulfurization and hydrocracking, optimization was performed on the catalyst used in the latter stage of heavy oil desulfurization, and evaluation was given on the performance in combination of commercially available hydrometallation catalyst/middle part HDS catalyst/bottom part HDS catalyst. As a result, achievement of the target of sulfur content in the desulfurized light oil of 300 ppm or lower was verified. Life evaluation test is in continuation on the heavy oil hydrocracking catalyst. (NEDO)

Fiscal 1995 verification survey of geothermal exploration technology. Report on a deep geothermal resource survey; 1995 nendo chinetsu tansa gijutsu nado kensho chosa. Shinbu chinetsu shigen hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-06-01

For the purpose of reducing the risk of deep geothermal resource development, the paper investigated three factors for the formation of geothermal resource in the deep underground, that is, heat supply from heat source, supply of geothermal fluids, and the developmental status of fracture systems forming reservoir structures. The survey further clarified the status of existence of deep geothermal resource and the whole image of the geothermal system including shallow geothermal energy in order to research/study usability of deep geothermal resource. In the deep geothermal resource survey, drilling/examination were made of a deep geothermal exploration well (`WD-1,` target depth: approximately 3,000-4,000m) in the already developed area, with the aim of making rationalized promotion of the geothermal development. And the status of existence of deep geothermal resource and the whole image of the geothermal system were clarified to investigate/study usability of the geothermal system. In fiscal 1995, `WD-1` in the Kakkonda area reached a depth of 3,729m. By this, surveys were made to grasp the whole image of the shallow-deep geothermal system and to obtain basic data for researching usability of deep geothermal resource. 22 refs., 531 figs., 136 tabs.

Leading survey and research report for fiscal 1999. Survey and research on earthquake disaster prevention technology for industrial machinery system; 1999 nendo sangyo kikai system no taishin bosai gijutsu no chosa kenkyu hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The current status was investigated of the above technology, and several matters were found to be important, which are the improvement of earthquake-proof performance, safety assessment, early-stage acquisition of information on earthquake, highly aseismic structures, inexpensive seismic isolation devices, prompt restoration, and the security of energy supply and materials transportation just after earthquake. Technologies that have to be developed before earthquake involve active vibration control, constant surveillance, management and maintenance of disaster preventing devices, preparation and updating of disaster-related databases, etc. Technologies need to be developed for real-time disaster control in case of earthquake, which involve instant-start vibration control devices, information gathering, airborne monitoring robots, rescue robots, etc. Also required are technologies for prompt assistance and recovery after earthquake, such as those for the physical soundness related diagnosis and assessment of structures, facilities, and machinery, and for their restoration, remedy, and reinforcement. What is required is the establishment of a comprehensive technology into which all the necessary element technologies are incorporated. Since coordination is necessary with other official projects being implemented in a unified way for an industrial area, this project will be effectively accomplished when it is also treated as an official project. (NEDO)

How large-scale technological development should be in the future. Survey and research on highly automated machines; Kongo no daikibo gijutsu kaihatsu no hoko ni tsuite. Kodo jidoka kikai ni kansuru chosa kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1982-03-01

A survey is conducted about highly automated machines such as industrial robots. The task to be subjected to development as derived from a survey conducted about needs is the construction of a dangerous work robot. It is pointed out that work in coal mines, tall buildings, industrial complexes, or nuclear power plants may encounter large-scale accidents, and the task is how to perform such work in an automated way. The tasks concluded to be subjected to development after a seed survey analysis are categorized into three groups of element technologies, namely, sensors and recognition function, mechanism and materials, and control and data processing. These element technologies are to be ultimately integrated into a robot, for critical work which is a combination of a highly intelligent robot main body and an integrated management system. Since it will happen that humans have to directly operate such a robot under delicate conditions and share the burden of judgement and thinking, it is also necessary to develop technologies to solve problems of man-to-robot engineering. It is proposed that a dangerous work robot research and development program be established before development is started. (NEDO)

Research and development of utilization technology of solar thermal energy system for industrial and other use. International joint technology development for solar energy utilization systems; Sangyoyo nado solar system jitsuyoka gijutsu kaihatsu. Taiyo energy riyo system kokusai kyodo gijutsu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

Takita, M [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

1994-12-01

Described herein are the results of the FY1994 research program for international joint technology development for solar energy utilization systems. The joint study with an Indonesian research institute takes a model of lumber drying plant for the design and feasibility study. All the parts it needs are technically available in Indonesia, except carbon fiber sheets and electronic devices for controlling purposes. The drying cost is higher than that of a plant which procures charge-free wood fuel, but lower than that of a plant which procures fuel at 30$/t. A cacao drying plant model is also studied. The feasibility study shows that the initial investment for the blowing-up model is much higher by 60% to 100% than that for the conventional plant. Its fuel cost is lower by 11% than that of residual oil but 27% higher than that of wood. 4 figs.

FY 2000 Report on technological trend surveys. Surveys regarding construction of the co-production techniques for substance and electric power; 2000 nendo gijutsu doko nado chosa hokokusho. Busshitsu to denryoku heisan ni yoru co-production gijutsu no kochiku ni kansuru chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

This project is aimed at surveys on the elementary and peripheral techniques necessary to construct the systems, with the objective to draw the conceptual designs of the total system for co-production of a substance and electric power. In a general reaction process, substances are produced under an advantageous condition that is dependent on reaction rate and equilibrium, where most of the energy is dissipated in the form of sensible and latent heat without being used for the chemical reaction. The co-production system under consideration uses high temperature of 500 degrees C or higher exhausted from a power station or industrial unit to produce macromolecules or synthesis gases, wherein the exothermic reaction increases temperature of the heat source, which is recovered in the form of steam for driving the steam turbine to produce electric power. On the other hand, low-temperature waste heat of around 150 degrees C is converted into a liquid fuel or other value-added products by the liquid phase pressurized system. The elementary techniques to construct these processes are surveyed, and the thermal processes are analyzed. The investigated items include substance production processes, electric power production processes and total systems. (NEDO)

[Development of analysis software package for the two kinds of Japanese fluoro-d-glucose-positron emission tomography guideline].

Science.gov (United States)

Matsumoto, Keiichi; Endo, Keigo

2013-06-01

Two kinds of Japanese guidelines for the data acquisition protocol of oncology fluoro-D-glucose-positron emission tomography (FDG-PET)/computed tomography (CT) scans were created by the joint task force of the Japanese Society of Nuclear Medicine Technology (JSNMT) and the Japanese Society of Nuclear Medicine (JSNM), and published in Kakuigaku-Gijutsu 27(5): 425-456, 2007 and 29(2): 195-235, 2009. These guidelines aim to standardize PET image quality among facilities and different PET/CT scanner models. The objective of this study was to develop a personal computer-based performance measurement and image quality processor for the two kinds of Japanese guidelines for oncology (18)F-FDG PET/CT scans. We call this software package the "PET quality control tool" (PETquact). Microsoft Corporation's Windows(™) is used as the operating system for PETquact, which requires 1070×720 image resolution and includes 12 different applications. The accuracy was examined for numerous applications of PETquact. For example, in the sensitivity application, the system sensitivity measurement results were equivalent when comparing two PET sinograms obtained from the PETquact and the report. PETquact is suited for analysis of the two kinds of Japanese guideline, and it shows excellent spec to performance measurements and image quality analysis. PETquact can be used at any facility if the software package is installed on a laptop computer.

Achievement report for fiscal 2000 on development of technology to evaluate reliability of petroleum refining facilities; 2000 nendo sekiyu seisei setsubi shinraisei hyoka nado gijutsu kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

This paper reports the achievements in fiscal 2000 in development of a technology to evaluate reliability of petroleum refining facilities. The development efforts were made mainly on analyses by simulation and neural net (NN) that utilize computers. In the high-temperature system facilities, the creep damage generation is governed by different factors including impurities. The evaluation on joint life requires simultaneous use of low temperature zone long-time test. Verification was made on application of non-destructive inspection, such as use of ultrasonic waves in the accelerated creep zone. Defect detecting capability was identified when an ultrasonic wave flaw detection model is used for buried piping. In the pulse eddy current flaw detection, a coil most superb in totality was selected by means of simulation, by which corrosion and wall thickness of piping and devices were detected from outside the sheathing materials. Development was made on a technology to diagnose and evaluate corrosion of tank in operation by using the AE method. The remaining life of transformers is determined by how seriously the coil insulating paper has been deteriorated, and furfural in the oil was found effective for the parameters. Particularly, application of the NN was revealed to be effective in estimating electric motor deterioration. A high-temperature sulfide corrosion rate estimating model was developed from the operation and measurement data of the facilities by applying the NN and TCBM. (NEDO)

Efecto del D-004, un extracto del fruto de Roystonea regia y omega-3 en el modelo de nado forzado en ratones Effect of D-004, a fruit extact from Roystonea regia and Omega-3 in a model of forced swimming in mice

Directory of Open Access Journals (Sweden)

Daisy Carbajal Quintana

2010-03-01

Full Text Available La depresión se encuentra entre las principales causas de morbilidad y mortalidad de la población adulta y su manejo farmacológico incluye, entre otras opciones alternativas, el uso de la medicina complementaria, como es el caso del aceite de pescado rico en ácidos grasos omega-3 (AGw3. El D-004, extracto lipídico de los frutos de la palma real (Roystonea regia que consiste en una mezcla de ácidos grasos, ha mostrado poseer una moderada acción antidepresiva. El objetivo de este trabajo consistió en comparar los efectos del tratamiento oral con D-004, con los AGw3 y con su terapia combinada en el modelo del nado forzado en ratones. Para ello, ratones machos se distribuyeron en 8 grupos: uno control tratado con el vehículo, dos con D-004 (250 y 500 mg/kg , dos con AGw3 (250 y 500 mg/kg, dos con la combinación y uno con imipramina (10 mg/kg i.p.. Todos los tratamientos disminuyeron significativamente el tiempo de inmovilidad con respecto al control, sin diferencias entre dosis similares de los respectivos tratamientos. En conclusión, el D-004, los AGw3 y su terapia combinada resultaron igualmente efectivos en reducir el tiempo de inmovilidad de los ratones, sin manifestarse efectos aditivos o sinérgicos con la administración conjunta de ambas sustancias.Depression is among the major causes of morbidity and mortality of adult population and its pharmacologic management includes among other alternative options, the use of the complementary medicine, e.g. the fish oil rich in Omega-3 fatty acids (AGw3. The D-004, a lipid extract of Real Palm fruits (Roystonea regia consisting of a fatty acid mixture, has a moderate antidepressant action. The aim of present paper was to compare the effects of oral treatment using D-004 with the AGw3 and with its combined therapy in forces swimming in mice. Thus, the male mice were distributed into 8 groups: one as control treated with vehicle, two with D-004 (250 and 500 mg.kg, two with AGw3 (250 and 500

Morphological and molecular characterization of a new genus and new species of parazoanthid (Anthozoa: Hexacorallia: Zoantharia) associated with Japanese Red Coral

Science.gov (United States)

Reimer, J. D.; Nonaka, M.; Sinniger, F.; Iwase, F.

2008-12-01

The Order Zoantharia has long been taxonomically neglected primarily due to difficulty in examining the internal morphology of sand-encrusted zoanthids. However, recent work using molecular markers has shown an unexpectedly high diversity of previously “hidden” taxa (families and genera) within Zoantharia (=Zoanthidea, Zoanthiniaria). In this study, unidentified sediment-encrusting zoanthid specimens ( n = 8) were collected from living Japanese Red Coral Paracorallium japonicum (Family Coralliidae) during precious coral harvesting by Remotely Operated Vehicle (ROV) and manned submersible (February 2004-January 2006) at depths of 194-250 m at six locations between Ishigaki-jima Island and Kikai-jima Island, southern Japan. DNA sequences (mitochondrial 16S ribosomal DNA [mt 16S rDNA], cytochrome oxidase subunit I [COI], nuclear internal transcribed spacer of ribosomal DNA [ITS-rDNA]) unambiguously place these specimens in a previously undescribed, new monophyletic lineage within the family Parazoanthidae. Corallizoanthus tsukaharai, gen. n. et sp. n. is the first reported zoanthid species associated with the family Coralliidae and unlike other described gorgonian-associated zoanthids ( Savalia spp .) does not secrete its own hard axis. Morphologically, C. tsukaharai sp. n. is characterized by generally unitary polyps and bright yellow external coloration.

Molecular machines in living cells. Seibutsu no bunshi kikai to sono system

Energy Technology Data Exchange (ETDEWEB)

Osawa, F. (Aichi Inst. of Tech., Nagoya (Japan))

1992-12-20

At first, flagellar motors of bacteria are reviewed as a typical example of molecular machines in living cells. A rotational motor is embedded in the cell membrane at the root of the flagellum. The driving power of the rotation is the flow of hydrogen ion from the inside to the outside of the cell. In a normal state of a bacterium, potential difference of about 0.2 V is produced by the ion pump existing in the cell membrane. A molecular motor of sliding motion of muscle attracts the attention on the relation of the input and output of the molecular motor. The mechanism of the smooth motion without fluctuation in the fluctuated environment and the fluctuated input is unknown. Next, the motion of Paramecium is discussed as an example of a system composed of a number of molecular machines. Paramecium moves to a place of a suitable temperature when placed in a water tank with temperature gradient, however, it does not stop the motion at the place of the suitable temperature and increases a probability to change the direction when leaving, that is it takes a method of indirect probabilistic control. 12 refs., 8 figs.

Achievement report for fiscal 1997 on the development of technologies for utilizing biological resources such as complex biosystems. Development of complex biosystem analyzing technology; 1997 nendo fukugo seibutsukei nado seibutsu shigen riyo gijutsu kaihatsu seika hokokusho. Fukugo seibutsukei kaiseki gijutsu no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The aim is to utilize the sophisticated functions of complex biosystems. In the research and development of technologies for effectively utilizing unexploited resources and substances such as seeweeds and algae, seaweeds are added to seawater to turn into a microbial suspension after the passage of two weeks, the suspension is next scattered on a carageenan culture medium, and then carageenan decomposing microbes are obtained. In the research and development of technologies for utilizing microbe/fauna-flora complex systems, technologies for exploring and analyzing microbes are studied. For this purpose, 48 kinds of sponges and 300 kinds of bacteria symbiotic with the sponges are sampled in Malaysia. Out of them, 15 exhibit enzyme inhibition and Artemia salina lethality activities. In the development of technologies for analyzing the functions of microbes engaged in the production of useful resources and substances for animals and plants, 150 kinds of micro-algae are subjected to screening using protease and chitinase inhibiting activities as the indexes, and it is found that an extract of Isochrysis galbana displays an intense inhibitory activity. The alga is cultured in quantities, the active component is isolated from 20g of dried alga, and its constitution is determined. (NEDO)

Fiscal 1997 report on the verification survey of geothermal exploration technology. 5-1. Development of the reservoir variation survey method (technology of prediction of reservoir variation); 1997 nendo chinetsu tansa gijutsu nado kensho chosa. Choryuso hendo tansaho kaihatsu (choryuso hendo yosoku gijutsu) hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

For the reservoir evaluation at an initial developmental stage and stabilization/maintenance of power after the start of operation, the fiscal 1997 result was described of the study of technology of prediction of reservoir variation. Using the conventional post processor, feasibilities were computed of reservoir models and behavior after the development, and gravity/self potential/resistivity variation. Variation in the seismic wave speed structure was large in travel time change distribution. The measuring accuracy of 1m sec is required to get enough detection resolving power. A conceptual design of the post processor development was conducted to study a system operated on Windows. Based on the reservoir numerical simulation technology, by taking in variation parameters such as gravity and self potentials as new model constraint conditions, the reservoir modeling technology which increased in accuracy by history matching was trially developed. Using the conventional reservoir model in the Oguni area, predictably computed were reservoir behaviors during 50 years which simulated a 20 MW development. Effectiveness of the post processor were able to be shown though influenced by characteristics such as permeability and resistivity. 74 refs., 95 refs., 12 tabs.

Report on achievements in fiscal 1998. Development of a waste disposal and recycle related technology. (Development of a technology to dispose of air bags adequately); 1998 nendo haikibutsu shori recycle kanren gijutsu kaihatsu air bag tekisei shori gijutsu no kaihatsu nado seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-12-01

This technological development is intended to develop a process technology to dispose adequately of air bags convergently when they are removed from waste cars, with consideration paid on environmental and safety aspects. This technology that can dispose of air bags remaining as air bag modules (ABM) in large quantity and adequately can solve the problems of maloperation in opening them in cars and noise in conventional disposal methods. The recovery and disposal system using an inflator can be expected of reducing work load on dismantling contractors and enhancing the work safety. Furthermore, the energy saving process utilizing combustion of plastics can save resources. However, this technology has not elucidated how dioxins, dust, smoke, sulfides, and nitrogen oxides are generated and how the generation can be prevented. Therefore, an exhaust gas dioxin testing facility and an exhaust gas treating facility were installed additionally to the existing heating treatment facility to develop a disposal technology to treat adequately the exhaust gases generated when ABMs are disposed conveergently in large quantity, and treat the waste water discharged from the facilities. Fiscal 1998 has performed preliminary tests to accumulate fundamental data, and design and installation of the above two facilities. (NEDO)

Fiscal 1999 research report on long-term energy technology strategy. Basic research on industrial technology strategy (Individual technology strategy). Electronic information technology field (Human process ware field for computers); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chsao hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku) denshi joho gijutsu bun'ya (computer kanren bun'ya no uchi, human process wear bun'ya)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This report summarizes the fiscal 1999 basic research result on industrial technology strategy of a human process ware (HPW) field on electronic information. Although the current HPW industry is not yet complete, various technologies concerned are being stored, and the HPW industry is expected as new major industry for home and personal information equipment. As factors hindering technological innovation in Japan, the incomplete market, poor cooperation between industry and government, ambiguous role of university, and poor standardization were pointed out. Technology trends were analyzed to extract seed technology fields from 3 viewpoints of mobile HPW available at any time, at any place and to anybody, HPW system capable of customizing every personal use, and HPW supporting development of a creativity. As general strategy, the technology seed chart and map of technical development targets for every HPW were prepared to conceive a route to practical use, and develop element technologies required for practical use, based on the future trend of the market. (NEDO)

Report on the FY 1999 survey on long-term energy technology strategy/basic survey for working out industrial technology strategy. Technology strategy by field - chemical/process field (chemical/process technology field); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (kagaku process bun'ya (kagaku process gijutsu bun'ya)))

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

As to long-term energy technology strategy, the paper described the results of the FY 1999 survey of chemical/process technology. The future chemical technology should be transformed from the material production technology in which priority used to be given to convenience to new chemical technology in which the functions needed are to be created. The shortage of the developmental period and minimization of the waste are also desired by the use of new methods. For it, the industry/government/university should gather wisdom together and fulfil the requests from other industries of the country under the circumstances of the society which is aging, is decreasing in birthrate, and is being highly information-oriented. At the same time, the technology should be contributional to constructing the circulating type society which has environmental harmony. If not, it cannot be the technology which is recognized by the society. Efforts should be made for the fundamental technology development, technology to create the materials needed in the society, and development of new process technology to be recognized in the society. Further, the development of technology to meet the needs/restraints from the society should be promoted as seen in the environmental hormone. At the same time, the intellectual base should be prepared such as arrangement of the technology database for advancing smooth technology development. (NEDO)

Vallo Reimaa : "Statussu regionalnogo tsentra nado sootvetstvovat i za nego nado borotsja" / Vallo Reimaa ; interv. Aleksei Starkov

Index Scriptorium Estoniae

Reimaa, Vallo

2007-01-01

Regionaalminister vastab küsimustele, mis puudutavad Jõhvi gümnaasiumi juurdeehituse rajamist ja riigilt selleks toetuse taotlemist, linnade konkurentsi regionaalkeskuse staatuse saamiseks, Ida-Viru maavanema kandidaate. Minister on seisukohal, et tuleb toetada kõike, mis tugevdab Jõhvi kui regionaalkeskuse staatust, ja regionaalne gümnaasium on just selline objekt

Report on the FY 1999 survey on long-term energy technology strategy/basic survey for working out industrial technology strategy. Technology strategy by field (formed raw material field); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (sokeizai bun'ya))

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The paper described the results of the survey of the formed raw material field in relation to the FY 1999 long-term energy technology strategy. In the advancing international specialization, efforts are being made for the secure basic base technology force and cost reduction required for competition, and at the same time the aim is not to retain/improve all the formed raw material technologies, but to discriminate the materials in the aspects except the cost. By promoting the reformation into the proposed type industry, it is necessary to work out the bold strategy including the review of the system/structure for promoting the strategic technology innovation by aiming at the important formed raw material technology which can be a life line for the assembly industry, in particular. Concretely, the comprehensive technology system which concentrated a variety of engineering knowledge/information was constructed. The system is shifted to the one that adopted information/communication technology. The conversion in the early time to the proposed type industry is attempted. Japan acquires capability for heightening the level of technology, by which Japan will continue leading the formed raw material technology to the world's top level. Japan realizes the network consisting of the industry, university and government. The environment is realized where new personnel will naturally enter the formed raw material industry and bottom up the total technology force. (NEDO)

Report on fiscal 1999 survey for geothermal exploration technology verification. Survey of deep-seated geothermal resources; 1999 nendo chinetsu tansa gijutsu nado kensho chosa hokokusho. Shinbu chinetsu shigen chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

To promote the development of deep-seated geothermal resources in a rationalized way, studies were conducted about deep-seated geothermal resource assessment techniques, development guidelines, and the like. For the development of techniques for estimating deep-seated geothermal reservoir parameters, the Uenotai district, Akita Prefecture, and the Hatchobaru district, Oita Prefecture, were designated as model fields, and a geothermal system conceptual model was fabricated. Data of the two districts were registered in a database. Using these data, verification was performed of the validity of stochastic estimation techniques, large area flow simulation, rock/water equilibrium reaction simulation, and the like. As for the technique of deep-seated resource amount estimation, a simplified reservoir model was experimentally constructed based on parameters determined by the stochastic estimation of deep-seated reservoirs and on the conceptual model, and a method was studied for TOUGH2-based production prediction. Studies were also made about deep-seated geothermal resource development guidelines, such as exploration guidelines, exploration well boring guidelines, and geothermal fluid production guidelines. (NEDO)

Report on fiscal 2000 survey for geothermal exploration technology verification. Survey of deep-seated geothermal resources; 2000 nendo chinetsu tansa gijutsu nado kensho chosa hokokusho. Shinbu chinetsu shigen chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

To promote the development of deep-seated geothermal resources in a rationalized way, studies are conducted about deep-seated geothermal resource assessment techniques, development guidelines, and the like. Data were collected at the Sumikawa-Onuma district, Ogiri district, Mori district, Yanaizu-Nishiyama district, and the Onikobe district, and compiled into a database to be open to the public. Studies were made about methods for estimating parameters for deep-seated geothermal reservoirs. The resultant findings indicate that, in the Uenotai and Sumikawa-Onuma districts where geothermal reservoirs are governed mainly by a fracture network, the relaxation method and extrapolation will be effective for deep-seated reservoir temperature estimation, and the ascending current analysis method and extrapolation for permeability estimation. The findings also indicate that the expanse of deep-seated reservoirs will be suitably estimated using a method similar to that applied to shallow-seated reservoirs. In the study of the estimation of the amount of deep-seated geothermal resources, it is concluded that the simplified model A will be effective in dealing with a geothermal district where there is a well-developed fracture network and the simplified model B in dealing with a geothermal district where supply of deep-seated fluid governed by an extensive fault prevails. (NEDO)

Development in fiscal 1998 of technology to put solar systems for industrial use into practical use. International joint technology development for solar energy utilization systems; 1998 nendo sangyoyo nado solar system jitsuyoka gijutsu kaihatsu seika hokokusho. Taiyo energy riyo system kokusai kyodo gijutsu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

The solar energy utilizing technologies having been developed under the Sunshine Project were used to have executed the international joint technology development on the 'solar heat utilizing drying system' in the Republic of Indonesia. This paper summarizes the achievements in fiscal 1998. In operating the pilot plant, three operational experiments out of seven experiments were carried out only by Indonesian engineers. As a result of the drying experiments, the heat collecting characteristics of the collector were as about half at 19 to 30% as the efficiency assumed in the design of 50%. The reason for this can be attributed to the fact that the cover glass used in the demonstration test in Japan had light permeability of about 87%, but the cover glass used in the test plant was made of frosted glass whose light permeability was about 37%. This glass is the only glass available for a heat collector in the solar heat hot water device in Indonesia, but is unsuitable for the heat collector. Another cause was that the insolation at the site was lower by about 30% than the one used at the design stage. (NEDO)

FY 2000 report on the R and D of the particulate utilization type creation technology of biological connective substances. Survey of the technical trend overseas; 2000 nendo biryushi riyogata seitai ketsugo busshitsu nado sosei gijutsu no kenkyu kaihatsu seika hokokusho. Kaigai gijutsu doko chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

The paper summarized the reports on the results of Japanese engineers' participating in the related scientific meetings held overseas as a survey report on the trend of the overseas technology. The scientific meetings they participated in were: 1) Impact of Genomics on Medicine and Pharmacogenomics Europe (Amsterdam; May 15-26, 2000), 2) Drug Discovery Technology 2000 (Boston; August 10-20, 2000), 3) Biotechnology 2000 (Berlin; September 3-12, 2000), 4) PacificChem 2000 (Hawaii; December 14-21, 2000), 5) 4th Winter Conference on Medicinal and Bioorganic Chemistry (Seattle; January 27 - February 4, 2001). Impact of Genomics on Medicine was composed of the following five fields: microarrays, proteomics, functional genomics and target validation, genetic variation technology, and applications of SNP analysis (joint session). Pharmacogenomics Europe was composed of the following four fields: applications of SNP analysis (joint session), SNP assays, targets and compounds, and clinical applications. (NEDO)

Development in fiscal 1998 of technology to put solar systems for industrial use into practical use. International joint technology development for solar energy utilization systems; 1998 nendo sangyoyo nado solar system jitsuyoka gijutsu kaihatsu seika hokokusho. Taiyo energy riyo system kokusai kyodo gijutsu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

The solar energy utilizing technologies having been developed under the Sunshine Project were used to have executed the international joint technology development on the 'solar heat utilizing drying system' in the Republic of Indonesia. This paper summarizes the achievements in fiscal 1998. In operating the pilot plant, three operational experiments out of seven experiments were carried out only by Indonesian engineers. As a result of the drying experiments, the heat collecting characteristics of the collector were as about half at 19 to 30% as the efficiency assumed in the design of 50%. The reason for this can be attributed to the fact that the cover glass used in the demonstration test in Japan had light permeability of about 87%, but the cover glass used in the test plant was made of frosted glass whose light permeability was about 37%. This glass is the only glass available for a heat collector in the solar heat hot water device in Indonesia, but is unsuitable for the heat collector. Another cause was that the insolation at the site was lower by about 30% than the one used at the design stage. (NEDO)

Survey on the long-term energy technology strategy. 2. Survey of the basement of the industrial technology strategy settlement (Environmental basement arrangement strategy); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa. 2. Sangyo gijutsu senryaku sakutei kiban chosa (kankyo kiban seibi senryaku)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

For the Japanese industry to cope properly with the age of great competition and to secure the technology competitive force, it is indispensable to collect/analyze a lot of information and develop policies, that is, strategies, for industrial technology. For study of types of technology innovation system, a survey was conducted in FY 1999 of samples of products with comparatively high competitive force. Concept of the product concerned was examined in terms of the enterprise (person) which created the product, enterprise which commercialized it first in the world, etc. As to each of the technologies, factors to get a top share were analyzed. Based on the analyses, factors to get a large share were classified, and the relations with technology were analyzed. With 'Study of industrial technology strategy' issued in March 1999 as reference, 54 of the products of which the world share is more than 75% were extracted. In the table, about the items on creation of technology, technology was classified into the basic technology, similar technology, traditional technology, and combined technology. About the items on improvement/application, it was classified into improvement and usage development. The other items were classified into production technology, users, and development/production cooperation infrastructure. (NEDO)

FY 1999 report on the results of the development of recycling technology of waste architectural materials, glass, etc. Development of the simple glass coloring/decoloring technology; 1999 nendo kenchiku haizai glass nado recycle gijutsu kaihatsu seika hokokusho. Kan'igata glass chakudasshoku gijutsu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For the purpose of increasing the ratio of recycling of waste architectural materials, glass, etc., the development was proceeded with of easy coloring of colorless glass by light irradiation and decoloring of it by heat treatment. The important point for technical development is to develop glass materials which are colored by light and decolored by heat at a level of technique with practicality and to develop coloring/decoloring device. Studies were made in the following three fields: 1) optimization of coloring/decoloring conditions for coloring/decoloring occurring from defects (color centers) under light irradiation; 2) optimization of coloring/decoloring conditions occurring from colorless ions and particulate formation under light irradiation; 3) development of a visible drawing device. In 1), bottle, sheet glass, and soda-lime silicate glass are colored brown by X-ray/UV radiation, but the coloring is bad in stability. However, it was found that the addition of silver oxide improved stability. In 2), it was recognized that when the glass containing a trace of Mn was melted in the reducing atmosphere, it became colorless, and when radiated by X-ray and heat-treated at approximately 200 degrees C, it was colored bluish violet which was vivid and stable. (NEDO)

Achievement report for fiscal 1996 on the research and development of technologies for important region. Development of control system technology for combustion with energy use rationalized, etc.; 1996 nendo juyo chiiki gijutsu kenkyu kaihatsu seika hokokusho. Energy shiyo gorika nensho nado seigyo system gijutsu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

The goal is to develop basic technologies to build an SiC device capable of service amid high-temperature surroundings for the advancement and optimization of combustion control systems. In an SiC semiconductor, the Si-C bond is broken when irradiated with ions, and this makes the occurrence of thermal oxidation easy to occur. In the study to form SiC into single-crystal substrates, a substrate with warpage of 10 micrometers or less and surface coarseness of 10 nanometers or less is realized. In the development of sensor technologies, the high-speed CVD (chemical vapor deposition) method is applied for the growth of crystals further on a 3C-SiC layer epitaxially grown by MBE (molecular beam epitaxy) surface control, which improves on layer characteristics. Element technologies are developed for the construction of a 3-terminal element (FET: field effect transistor), which is for the construction of a high-temperature, high-speed SiC device. An effort is made at achieving 3C-SiC hetero-epitaxial growth, etc., on a 3-inch Si substrate using an SiC crystal film formation experimenting apparatus, which aims at constructing a control device. Concerning the combustion control system, the relations between the air/fuel ratio and the emission spectra of radicals OH, CH, and C2 in a flame are made clear. Also referred to are the basic studies being conducted at research institutes such as universities and a survey of technological trends abroad.

Fiscal 1997 research report on development of use technology of bio-resources such as complex biosystem (Development of use and production technologies of complex biosystems); 1997 nendo fukugo seibutsukei nado seibutsu shigen riyo gijutsu kaihatsu seika hokokusho (fukugo seibutsukei riyo seisan gijutsu no kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

This report summarizes the fiscal 1997 research results on production technology of functional materials, and the research study result for utilizing substance production and decomposition by complex biosystem for industries. For detecting technique of microorganisms in soil, staining by CFDA-AM was suitable, and allowed visualization of sulfate- reducing bacteria during culture. For research on functional analysis technology, study was made on atomic force microscope technology to detect microorganisms in environment and observe their fine structures. For research on detection, separation and cultivation technology of difficult-to-culture microorganisms, a molecular genetic analysis method of microbial communities and a determination method of their viability were selected. For functional substance production technology, study was made on technical utilization of bioflocculant produced by microbial consortia as environment-friendly oil removal reagent, and on gene transfer control in microbial consortia. For the research study for the project, survey was made on useful substances produced by complex biosystem. (NEDO)

FY 2000 report on the R and D of the particulate utilization type creation technology of biological connective substances. Survey of the technical trend overseas; 2000 nendo biryushi riyogata seitai ketsugo busshitsu nado sosei gijutsu no kenkyu kaihatsu seika hokokusho. Kaigai gijutsu doko chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

The paper summarized the reports on the results of Japanese engineers' participating in the related scientific meetings held overseas as a survey report on the trend of the overseas technology. The scientific meetings they participated in were: 1) Impact of Genomics on Medicine and Pharmacogenomics Europe (Amsterdam; May 15-26, 2000), 2) Drug Discovery Technology 2000 (Boston; August 10-20, 2000), 3) Biotechnology 2000 (Berlin; September 3-12, 2000), 4) PacificChem 2000 (Hawaii; December 14-21, 2000), 5) 4th Winter Conference on Medicinal and Bioorganic Chemistry (Seattle; January 27 - February 4, 2001). Impact of Genomics on Medicine was composed of the following five fields: microarrays, proteomics, functional genomics and target validation, genetic variation technology, and applications of SNP analysis (joint session). Pharmacogenomics Europe was composed of the following four fields: applications of SNP analysis (joint session), SNP assays, targets and compounds, and clinical applications. (NEDO)

FY 1998 report on the results of the development of the utilization technology of biological resources such as bioconsortia. Development of the consortium based analysis technology; 1998 nendo fukugo seibutsukei nado seibutsu shigen riyo gijutsu kaihatsu seika hokokusho. Fukugo seibutsukei kaiseki gijutsu no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

For the purpose of establishing the analysis technology and industrial utilization technology required for the establishment of the utilization technology of consortia's high functions which are already used in the fermentation technology field over the limit of the conventional bio-technology using functions of single biological species, study was made to look for the consortium based analysis technology by which the consortium base can be analyzed as it is using the molecular biological method. Studies were made in the following four fields: 1) new identification technology of eucaryote using II DNA topoisomerase genes (PCR amplification method of II DNA topoisomerase genes); 2) method to detect new recognition peptide activated microorganism (adjustment of cortical antigen); 3) technology to elucidate detection/response mechanism of the specific environment and adaptation/resistance mechanism of the specific environment; 4) incubation method inside 3D matrices. In 3), studies were made of the analysis of inhibition mechanism of korormicin and separation of solvent-resistant oil degradable bacteria. In 4), for the settlement and dynamic analysis of microorganism consortium by studying incubation conditions, conducted was the molecular system analysis of bacteria and eumycetes inhabiting in sponge. (NEDO)

FY 1998 annual summary report on manipulation of atomic and molecular extremes. Development of technologies for high-efficiency analysis/manipulation of DNA and the like; 1998 nendo genshi bunshi kyokugen sosa gijutsu no kenkyu kaihatsu seika hokokusho. DNA nado kokoritsu kaiseki sosa gijutsu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

The objectives are set to establish the techniques for observation/manipulation of atoms and molecules, as the common basic techniques for various industrial areas, e.g., new materials, electronics, biotechnology and chemical. Development of atomic field and scanning tunneling microscopes working under extreme conditions has been pursued, in order to manipulate complex systems, such as living body. For identification of molecular species, laser-excited fluorescence is combined with scanning mechanical probing to further refine the single molecule detection/identification techniques, and the objectives are set to develop a new method for evaluating molecules in a living body using a scanning probe microscope, and also to develop a novel scanning probe microscope for molecules in a living body. The other efforts were directed to R and D of the techniques for observing structures of organic molecules and the like through the measurements of adsorption process of organic molecules and clusters on semiconductor substrates and their surface reactions, and precision measurements of vibrational conditions of adsorbed molecular species reacting in the solid-liquid interfaces by high-sensitivity Raman spectroscopy to elucidate the catalysis mechanisms at the molecular level. (NEDO)

FY 1998 report on the results of the development of utilization technology of biological resources such as bioconsortia. Development of the bioconsortia system utilization/production technology; 1998 nendo fukugo seibutsukei nado seibutsu shigen riyo gijutsu kaihatsu seika hokokusho. Fukugo seibutsukei riyo seisan gijutsu no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

For the purpose of developing the industrial utilization technology, analysis was made of functions and interactions of the specified functional biological groups, and at the same time the developmental study was made of the technology to isolate/culture the constitutive biological groups. The FY 1998 results were summed up. As to the technology to detect microorganisms in soil, the SFDA method was improved and the new dyeing method was developed. And, there almost was hope for the development. Concerning the functional analysis technology, the functional substances peculiarly manifested only in the complex system in the ocean environment are searched. Several kinds of compounds were found out, and at the same time the test to confirm the biological activity is under way. Relating to the isolation/culture technology, study was made on rotten fruit, and the existence in the sample of the microorganisms which are difficult in isolation/culture was newly confirmed. In regard to the culture of the microorganisms which are difficult in isolation/culture, availability of the replica method was found out. As to the technology to produce functional substances, studies were made on the following: utilization technology of the environmental harmony type oil/water separation polymer producing microbial consortia, method to artificially make gene exchanges in the microbial consortia, etc. (NEDO)

Achievement report for fiscal 1981 on Sunshine Program survey and research. Joint projects on solar energy between Japan and Australia, etc. (Japan-France technological cooperation on solar energy); 1981 nendo Nichigo nado taiyo energy gijutsu kyoryoku jigyo seika hokokusho. Nichifutsu taiyo energy gijutsu kyoryoku

Energy Technology Data Exchange (ETDEWEB)

NONE

1982-03-01

A curved-surface thermal power system just before completion is visited, located on the island of Corsica. Light is collected by a curved-surface mirror in which narrow flat-surface mirrors with their length matching the linear collector width are attached amphitheater-wise to a curved-surface foundation built of concrete, and a linear collector performs tracking along the focal line. Exchange of information and comparative study will be required concerning this system. As for passive use of heat, a flat-plate collector has reached a level of practical application at homes in the low-temperature domain. Sites related to long-term basic research and seawater desalination are also visited. As for collector in the high-temperature domain, a THEK (Thermo-Helio-Electricity Kilowatt) system which is a spherical mirror collector is on the initial stage of planning. It is important to compare various types of curved-surface systems for their merits and demerits. As for the production of solar cells for photovoltaic power generation, it is monopolized by the Photowatt Corporation, with most of the products to be exported for use as independent power sources. As for future development, the casting technique will be industrialized at the end of 1983, the ribbon type will come next, and the amorphous material will be farther in the future. The task is how to enhance technical cooperation in the future. (NEDO)

FY 1998 report on the results of the development of utilization technology of biological resources such as bioconsortia. Development of the bioconsortia system utilization/production technology; 1998 nendo fukugo seibutsukei nado seibutsu shigen riyo gijutsu kaihatsu seika hokokusho. Fukugo seibutsukei riyo seisan gijutsu no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

For the purpose of establishing the technology to use high grade functions of the bioconsortia system, the R and D were conducted, and the FY 1998 results were summed up. As to the study of functional material producing technology, screening of the 2400 strains owned by Marine Biotechnology Institute was conducted using reporter strain, and about 400 strains of homoserine lactone producing bacteria which are interbiological information convey substances were obtained. Concerning the effective decomposing/purifying technology of petroleum products, study of petroleum decomposition analysis technology was finished in the development of culture/control technology of petroleum decomposition microbial consortia constitutive bacteria. Relating to the analysis of the petroleum decomposition microbial consortia, changes in the bacteria population at the site of the heavy oil pollution accident on the Sea of Japan were investigated for the past one year by the PCR/DGGE method. It was found out that levels of the oil pollution in ocean could be assessed by measuring the concentration of Alcanivorax. As to the technology for highly utilizing unused petroleum fractions, conducted were the chemical analysis of photolytic crude oil, selection of the decomposition microbial consortia, etc. (NEDO)

Fiscal 1996 report on the results of the R and D under a consignment from NEDO of environmental technology such as recycling (for public). 1; 1996 nendo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Recycle nado kankyo gijutsu kenkyu kaihatsu seika hokokusho (kokaiyo). 1

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

This R and D is aimed at promoting reduction in environmental loads by waste, etc. and reutilization of waste, etc., and at developing environmental technology such as recycling contributing to reducing road traffic noise. Studies were made on operation conditions of material separation in the bottle state and flake state, color separation, washing process, etc. Moreover, tests were conducted on comparisons of performance of shredders with different functions. Running tests of 100,000 times were conducted to confirm effectiveness of durability of the paved road with used papers. Measurement of hardness of the resin using the sol-gel method and coating experiment using organic dye were carried out to study the membrane effect speed and flaw resistance of coating of coloring bottles. Gasification of shredder dust and separation of nonferrous metal and glass were conducted to get the basic data. As to FRP bath tubs, the ratio of glass fiber and plastics was studied and western tiles were trially manufactured. Further studies were made of removal conditions of noncombustibles, chlorine and sulfur content, and reaction conditions of alkali additives including kind, quantity and addition method. 166 figs., 132 tabs.

FY 2000 report on the survey of long-term energy technology strategy, etc. - Fundamental survey to work out the industrial technology strategy. Research survey on technology innovation indices to be worked out; 2000 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (gijutsu kakushin shihyo no sakutei ni kansuru chosa kenkyu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For technology innovation, it is indispensable to arrange the environment where the continuous and spontaneous technology innovations are generated. >From this point of view, the paper re-confirmed functions of enterprises, universities and national research institutes that are main bodies of technology innovation. For the use for working out measures for activation as the basic data, conducted were the making of indices for surveying the whole system of technology innovation in Japan, and the study of the data to be prepared as statistics and the survey method. In the 1st stage, about 450 figure/table data related to technology innovation were collected for making them database from official statistic data and publications of governments and international organizations in Japan and European countries. Further, using official statistic data, about 240 figure/tables were made which seem to be important as indices of technology innovation. In the 2nd stage, on the basis of this database, the details of the activities were analyzed, and from the indices, the actual situation/subjects were considered. At last, the paper explained the index system of 'Oslo Manual' which is a guideline of working out OECD's innovation indices. (NEDO)

FY 2000 report on the survey of long-term energy technology strategy, etc. - Fundamental survey to work out the industrial technology strategy. Research survey on technology innovation indices to be worked out; 2000 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (gijutsu kakushin shihyo no sakutei ni kansuru chosa kenkyu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For technology innovation, it is indispensable to arrange the environment where the continuous and spontaneous technology innovations are generated. >From this point of view, the paper re-confirmed functions of enterprises, universities and national research institutes that are main bodies of technology innovation. For the use for working out measures for activation as the basic data, conducted were the making of indices for surveying the whole system of technology innovation in Japan, and the study of the data to be prepared as statistics and the survey method. In the 1st stage, about 450 figure/table data related to technology innovation were collected for making them database from official statistic data and publications of governments and international organizations in Japan and European countries. Further, using official statistic data, about 240 figure/tables were made which seem to be important as indices of technology innovation. In the 2nd stage, on the basis of this database, the details of the activities were analyzed, and from the indices, the actual situation/subjects were considered. At last, the paper explained the index system of 'Oslo Manual' which is a guideline of working out OECD's innovation indices. (NEDO)

FY 1998 report on the development of technology for reservoir mass and heat flow characterization. Theme 5-2. Monitoring and modeling of reservoir mass and heat flows (Integrated reservoir modeling and simulation techniques/Modeling support technique); 1998 nendo chinetsu tansa gijutsu nado kensho chosa choryuso hendo tansaho kaihatsu hokokusho (yoyaku). 5-2. Choryuso hendo yosoku gijutsu (modeling shien gijutsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

This R and D are aimed at establishing technology to support the reservoir modeling work required for predicting the reservoir variation from the geological/geochemical side. The contents of the development are (1) establishment of the practical measuring system for core fracture system, and (2) establishment of new modeling support technology. In (1), as the core fraction system measuring system, the measurement of fluid inclusion homogenization temperature and melting point and laser Raman spectroscopy were applied to the Wasabizawa area to obtain the results. In (2), the R and D were conducted of a rapid age measuring method for altered rock/unaltered rock and an analytical method for fluid flow using trace chemical components of hydrothermal minerals. In the former, 3-D thermoluminescent intensity of the age-known quartz was measured. The TL age of weak altered rock of Kijiyama dacite in the Wasabizawa area was 320Ka, almost the same result as 320Ka already reported. In the latter, trace components of quartz were measured at each well, and changes in the depth direction were made clear. It was made clear that the variation of Na/K ratio is large around the lost circulation stratum. The geothermal fluid flow was made clear by the analysis of similarity of the intensity ratio. (NEDO)

FY 1999 Report on research and development of energy utilization rationalization superhigh-technological liquid crystal technologies. Superhigh-technological electronic technology development promotion project for new functional electronic material design, control and analysis technologies; 1999 nendo energy shiyo gorika chosentan ekisho gijutsu kaihatsu seika hokokusho. Chosentan denshi gijutsu kaihatsu sokushin jigyo shinkino denshi zairyo sekkei seigyo bunseki nado gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-04-01

Described herein are the FY 1999 results of the liquid crystal technology development project. For the researches on multi-layer reflection, composite panels of flattened resins of different refractive index are developed to improve 2-layer monochromic contrast ratio. The guest/host liquid crystal compositions of high orientation order are investigated as the those useful for high contrast. Compounds are pursued for superanisotropic light absorption, and modification with a substituent is found to be effective. Molecular orientation controlling is also studied. For researches on memory-sustaining type liquid crystals, the studied items include formation of thin ferroelectric films on glass substrates, improvement of voltage-sustaining characteristics by composites (including compounds), and doping of trace quantities of ionic impurities. For development of image element colors, the studied items include multi-lattice-structured, oriented HPDLC devices, composites of high birefringence (high order light scattering), and light interference, high order light scattering type light control devices. The multi-dimensionally anisotropic structure of configuration divided into 3 parts of R, G and B is developed to create directive reflection which improves brightness of the reflection type color liquid crystal. A group of compounds are pursued to develop liquid crystal compositions of high refractive index anisotropy, and promising ones are found. The results of the comprehensive investigations are also described. (NEDO)

Report on results concerning development of supermetal technology (FY1999-2000). Development of evaluation technology for formability of super metal (development of evaluation technology for formability of recrystallized microstructured plate); Super metal no gijutsu kaihatsu seika hokokusho (1999 - 2000 nendo). Super metal no seikeisei hyoka gijutsu nado no kaihatsu (bisai saikesshotsububan no seikeisei hyoka gijutsu no kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

In connection with the innovative manufacturing of large base materials having a mesoscopic grain structure by means of technologies for high deformation accumulation control, recovery/recrystallization control, etc., research was conducted on evaluation technology for various characteristics such as formability, with fiscal 2000 results compiled. For the purpose of evaluating average grain size from an optical microscopic photograph of structures, it was judged reasonable to determine the average cut piece length. A device introduced to this development project was a horizontal goniometer capable of ODF (crystallite orientation distribution function)/pole figure measurement, qualitative analysis, and residual stress measurement. With warm rolling performed by controlling both material temperature of 7475 based alloys and roll temperature, thermally stable micro sub-grain structures were obtained. As a result of ODF analysis of this warm-rolled material, it was found that a {beta} orientation group existed very sharply in the area from the sheet surface to the center planar part of the thickness. The grain refinement of 5083 based alloys using a warm rolling method was also successful, with its ODF analysis revealing that the accumulation of the {beta} orientation group was very high as in the 7475 based warm-rolled materials. (NEDO)

Achievement report for fiscal 1998. Development of control system technologies such as combustion with energy consumption rationalized; 1998 nendo seika hokokusho. Energy shiyo gorkika nensho nado seigyo system gijutsu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

To improve and optimize fuel control systems, basic technologies were studied for building SiC devices capable of high-temperature operation. The technologies involved the construction of single-crystal SiC substrates, development of element technologies such as conduction control, experimental production of SiC devices, and systems incorporating SiC devices for controlling, for example, combustion. The subjects of research and development for fiscal 1998 included the technologies related to common SiC semiconductor substrates (SiC substrate crystallinity evaluation by X-ray topography, thermal oxidation acceleration by ion irradiation, and annealing of ion-implanted SiC by excimer laser ), technologies of forming an SiC single crystal into a substrate, technologies related to SiC sensors, technologies related to SiC devices capable of operation at high temperature and high speed, technologies related to SiC devices for controlling, and technologies for controlling, for example, combustion. The subjects of basic researches at universities and research institutes included new crystal growing methods, ion beam-aided SiC synthesis, effect of irradiation of SiC with neutrons, and nuclear conversion implantation. (NEDO)

Fiscal 1998 research report. Survey on R and D, and application technology of biotechnology; 1998 nendo chosa hokokusho. Bio technology no kenkyu kaihatsu, sangyoka gijutsu nado ni kansuru chosa kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Survey was made mainly on use of biotechnology as resource saving and energy saving processes. Biotechnology is in wide use in a pharmaceutical field, while its application is on the increase in agriculture, food, chemistry, energy and environment fields. The USA is ahead of Japan and Europe. In the USA, there are more than 1000 ventures, and R and D of biotechnology, in particular, gene analysis and manipulation techniques are in progress together with acquisition of patents. In biomass energy, production of ethanol from corn, and development of biodiesel are in progress in the USA and Europe, respectively. Use of biomass should be promoted because of its global environment compatibility and sustainable productivity. In the future bio-market, genome analysis and its application are most important, however, Japan is behind in such technology in the world. The Joint approach by industry, university and government is necessary from the viewpoint of a future marketability and international competitiveness. Promotion of a public acceptance and nurture of creative talents are also important. (NEDO)

FY 1999 report on the results of the technology development for abatement of pollutants related to oil refining; 1999 nendo sekiyu seisei osen busshitsu teigen nado gijutsu kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The technologies are developed for efficiently, economically improving quality of automobile fuels by, e.g., abatement of environmental pollutants present in the oil products. For improvement of hydrodesulfurization rate of gas oil deep hydrodesulfurization process, the catalyst components high in isomerization ability of the hard-to-desulfurize compounds are investigated, and effectiveness of zeolite is confirmed. For production of low-sulfur gas oil by hydrodesulfurization and hydrocracking of heavy oil, the catalyst with small pores is preferable for desulfurization of gas oil as the co-product of the treatment of heavy oil in the presence of catalyst for heavy oil desulfurization. For hydrocracking, the catalysts are prepared, on a trial basis, for achieving the target gas oil sulfur content of 10ppm or less by optimizing the zeolite and matrix properties. For suitability of gas oil qualities, it is found that the hydrogenation step is the rate-determining step among the reaction routes involved in the hydrogenation of difficult-to-desulfurize compounds. The data of low-sulfur gas oil qualities in Europe are collected. (NEDO)

Survey on utilization of database for research and development of global environmental industry technology; Chikyu kankyo sangyo gijutsu kenkyu kaihatsu no tame no database nado no riyo ni kansuru chosa

Energy Technology Data Exchange (ETDEWEB)

1993-03-01

To optimize networks and database systems for promotion of the industry technology development contributing to the solution of the global environmental problem, studies are made on reusable information resource and its utilization methods. As reusable information resource, there are external database and network system for researchers` information exchange and for computer use. The external database includes commercial database and academic database. As commercial database, 6 agents and 13 service systems are selected. As academic database, there are NACSIS-IR and the database which is connected with INTERNET in the U.S. These are used in connection with the UNIX academic research network called INTERNET. For connection with INTERNET, a commercial UNIX network service called IIJ which starts service in April 1993 can be used. However, personal computer communication network is used for the time being. 6 figs., 4 tabs.

FY 1999 report on the results of the R and D of the environmental technology of recycling, etc. 1; 1999 nendo recycle nado kankyo gijutsu kenkyu kaihatsu seika hokokusho. 1

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

For the purpose of reducing environmental loads of waste and recycling waste, etc., the R and D were carried out, and the FY 1999 results were summarized. In the study of the technology for high-grade recycling of PET bottles, construction work for stabilization of the quality of drainage water was done of a demonstration plant with a treating capacity of 8,000t/y which was constructed in FY 1996, and the stability in long-term operation was examined. In the survey of fluctuations in flake quality, the verification data indicated that the plant could be stably operated. As to the alteration of the bottle cleaning process from wet method to dry method, stabilization of the label separation performance was recognized. By the above-mentioned matters, the technology to recycle/treat PET bottles was established. In the development of the technology to recycle waste plastics which are difficult to treat, assessment was made of the treatment capacity in dry distillation gasification furnace of shredder dust and gasification characteristics. As to the removal of wire harness, separation of glass from fine copper wire, etc., methods which are promising were proposed, and it was concluded that those were not valid as a treatment method in the plant scale in terms of economical efficiency. (NEDO)

Troihh nado ubrat, reshil komissar / Boris Tuch

Index Scriptorium Estoniae

Tuch, Boris, 1946-

2004-01-01

4. märtsil esilinastus mängufilm "Täna öösel me ei maga" : stsenaristid Kristian Taska, Jaan Tätte : režissöör Ilmar Taska : operaator Istvan Borbas : produtsent Kristian Taska : peaosades Carmen Kass, Peter Franzen; Maria Avdjushko, Priit Võigemast : Taska Productions

Ne nado obizhatsja na Karzaja / Sven Mikser

Index Scriptorium Estoniae

Mikser, Sven, 1973-

2008-01-01

Afganistani presidendi Hamid Karzai arvates on liitlasvägede Helmandi provintsis viibimise ajal olukord provintsis halvenenud. Autori arvates on Eesti rahukaitseväed teinud oma tööd Afganistani olukorra stabiliseerimisel hästi, ja seda jätkatakse

Fiscal 1999 research report on long-term energy technology strategy. Basic research on industrial technology strategy (Individual technology strategy). Electronic information technology field (Human process ware field for computers); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chsao hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku) denshi joho gijutsu bun'ya (computer kanren bun'ya no uchi, human process wear bun'ya)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This report summarizes the fiscal 1999 basic research result on industrial technology strategy of a human process ware (HPW) field on electronic information. Although the current HPW industry is not yet complete, various technologies concerned are being stored, and the HPW industry is expected as new major industry for home and personal information equipment. As factors hindering technological innovation in Japan, the incomplete market, poor cooperation between industry and government, ambiguous role of university, and poor standardization were pointed out. Technology trends were analyzed to extract seed technology fields from 3 viewpoints of mobile HPW available at any time, at any place and to anybody, HPW system capable of customizing every personal use, and HPW supporting development of a creativity. As general strategy, the technology seed chart and map of technical development targets for every HPW were prepared to conceive a route to practical use, and develop element technologies required for practical use, based on the future trend of the market. (NEDO)

Fiscal 1997 R an D project on industrial science and technology under a consignment from NEDO. R and D of the ultimate manipulation technology of atoms and molecules (high-efficiency and analysis and manipulation technology for DNA); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo gijutsu Sogo Kaihatsu Kiko itaku. Genshi bunshi kyokugen sosa gijutsu no kenkyu kaihatsu seika hokokusho (DNA nado kokoritsu kaiseki sosa gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

This paper describes R and D of the ultimate manipulation technology of atoms and molecules (atom technology). Through the observation of super spiral DNA fixed on a spermin or spermidine treated mica substrate by AFM (atomic force microscope), fixation of DNA without any deformation in solution was clarified, and visualization of the spiral structure of DNA were successfully achieved. Manipulation of Xe atoms adsorbed on an Si(111) surface was certainly possible by using STM (scanning tunneling microscope)/atom probe equipment. A nucleation mechanism in crystal growth was studied for various organic source-molecules/GaAs(001) surface systems, and formation of high-density nuclei on the GaAs surface was achieved by accelerating the translational energy of Ga material molecules up to 6eV or more. Ziegler- Natta catalysis important for industrial polymerization of olefin molecules was precisely analyzed by first-principle dynamic simulation. A large-scale simulation of zeolite catalyst is also in promotion for methanol to gasoline conversion. 51 refs., 87 figs., 7 tabs.

FY 1999 New Sunshine Project survey research project - Survey on the long-term energy technology strategy, etc. Fundamental survey to decide on the industrial technology strategy - Technology strategy by field (Material technology field - Nonferrous metal field); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (zairyo gijutsu bun'ya (hitetsu kinzoku bun'ya)))

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The survey/study were conducted to contribute to proposing technology strategies such as technical competitive force and the forecast in the material field, especially in the silicon wafer and compound semiconductor field. As to the silicon wafer technology, the following technologies were pointed out as those to be reinforced: future silicon crystals, mirror processing wafer, breakthrough technology needed for super LSI, heat-treated wafer, epitaxial wafer, SOI wafer, measuring/assessment technology, etc. In relation to the compound semiconductor technology, survey/study were made on the bulk crystal growth technology, epitaxial growth technology, crystal growth device technology, wafer processing technology, inspection/evaluation technology, device processing technology, etc. As the comprehensive strategy, the following were proposed: establishment of the place for industry/government/university cooperation, establishment of the center for evaluation of wafer materials/characteristics/process, and establishment of the compound semiconductor R and D center where men of practical business ability from industry/government/university get together and conduct the R and D of production technology and production facilities for compound semiconductor materials and devices. (NEDO)

Report on surveys in fiscal 2000 on the survey on foundation to establish industrial technology strategy. Survey on lifetime education for mechanical engineers; 2000 nendo sangyo gijutsu senryaku sakusei kiban chosa hokokusho. Kikai gijutsusha shogai kyoiku chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

With an objective to set up a system for full-scale lifetime education, a feasibility study has been performed on preparing new educational materials and performing seminars. The continuing education program developed by the Japan Society of Mechanical Engineers is intended to assist engineers studied under the new engineer system to accumulate actual work experience after having acquired the qualification, and motivate ability maintenance and self-enlightenment after having acquired the engineer qualification, mainly through the training meetings and lecture meetings held by the Japan Society of Mechanical Engineers. The education items in the major field course include dynamics of materials and machines, energy and flow, information and control, and design and production. The items in the general common course include presentation and communication, kinetics learned from actual cases, engineer ethics, product liability and product safety. The seminar was held for two days for engineers graduated from undergraduate departments and experienced in actual works for two years or longer as the object. The actual status survey related to the continuing education by corporations revealed that 83% of the corporations has implemented intra-corporation training, and encouraged positive participation to outside seminars. (NEDO)

FY 1999 survey report on the survey of destruction technology of HFC, etc. for rationalization of energy use. Survey of the actual state of use/recovery/emissions of HFC, etc.; 1999 nendo energy shiyo gorika HFC nado hakai shori gijutsu chosa hokokusho. HFC nado shiyo kaishu haishutsu jittai chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This survey was aimed at collecting the basic data for studying a possibility of conversion of the recovery system of refrigerant freons, mostly DFC, into HFC, etc., which has been proceeded with in Japan. Of HFCs, PFCs and SF{sub 6} used for survey, only SF{sub 6} is now being recovered and processed. As to HFCs, HFC-134a was arranged, and the recovery/destruction to meet users' handling methods are requested because of the diverse usage and users. The points of the control of emissions of chemical substances into the atmosphere are the decrease in number of times of transport/filling-up at the time of materials handling and the closed system in plants and installation. If considering the heightening of efficiency of materials flow, requested are the decrease in number of times of transport/filling-up, the increase in quantity received by users, and measures to be taken for leakage at the time of receiving. In relation to the conversion of the recovery system of refrigerant freons, mainly CFC, into HFC, etc., all the industries concerned with the generation of the used substances to the materials flow have to promote the technical development for the structure and recovery in cooperation with each other. (NEDO)

Research and development of utilization technology of solar thermal system for industrial and other use. Development of passive solar system (research and development of advanced glazing); Sangyoyo nado solar system jitsuyoka gijutsu kaihatsu. Passive solar system no kaihatsu (chokozai nado no kenkyu kaihatsu (advanced grazing no kenkyu kaihatsu))

Energy Technology Data Exchange (ETDEWEB)

Takita, M [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

1994-12-01

Described herein are the results of the FY1994 research program for advanced glazing in which solar energy is efficiently utilized. The peripheral techniques are surveyed for evaluation of characteristics of large-size dimming glass, optimization of film compositions and scaling up. The dimming device, made on a trial basis, attains a target controllable rage of at least 50% for visible light transmittance. The suitable components include WO3 as the electrochromic material producing color under a reducing atmosphere, NiO as the counter electrode producing color under an oxidative atmosphere, and hydrated SbOx as the proton-conducting electrolyte. The test results indicate possibility of the dimming glass stably operable while being irradiated with a quantity of sun ray of around 10 years. The study on scaling up the dimmer glass develops, on a trial basis, a process for producing large-size glass and evaluates its characteristics, where the film parameters are investigated. It also investigates the peripheral techniques for assembling the devices for the large-size glass, and develops useful techniques, such as those for sealants and improved sealing methods. 1 fig., 1 tab.

FY 1999 report on the results of the investigation of feasibility of joint implementation promotion through plant-related technology transfer to Central/Eastern European countries; 1999 nendo Chu Too nado chiiki ni okeru plant yushutsugata gijutsu iten wo tsujita kyodo jisshi nado suishin kanosei ni kansuru chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Feasibility of joint implementation promotion through plant-related technology transfer is investigated for 15 Central and Eastern European countries. Emissions of the greenhouse effect gases can be relatively easily abated in these countries by improving energy utilization efficiency, because they have more advanced infrastructures than developing countries, and are behind the developed countries in modernization of the facilities. Therefore, European and North American countries have been positively promoting the AIJ programs in these countries, and there are fierce competitions for promising projects. It will be necessary for Japan to provide public loans, e.g., environmental yen loans, to promote the plant-related JI/CDM projects in these countries. Many of these countries have not drawn plans for reducing emissions of the greenhouse effect gases, and expect establishment of the international cooperation systems for exchanging information related to global warming problems, and introducing the Japanese technologies and policies. (NEDO)

Report on the fiscal 1993 investigational study of the environmental technology development trend in Japan. Trend survey of the introduction policy of environmentally friendly products; 1993 nendo Nippon ni okeru kankyo gijutsu kaihatsu doko nado ni kansuru chosa kenkyu hokokusho. Kankyo chowagata seihin no donyu hosaku nado doko chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-05-01

An investigation was conducted into the systematical scheme for the introduction and promotion of environmentally friendly products mostly to the U.S., Europe and China. In the U.S., the introduction policy is given to one and all fields of the industry. The introduction policy of the U.S. has a characteristic that the introduction is left to the market principle by DSM or permit dealing, etc. except the preferential tax system and systematical finance in which the government is concerned. The policy of European countries is characterized by the idea preceding, standards or rules are first given, and the whole is pushed on to them. Accordingly, it seems that there is few atmosphere of expecting to receive the government side economic incentives from the corporate side. Legal regulations on the environment in China were prepared in a comparatively early time (1979), but the supervision of obeying the regulations and the appearance/spread of environmentally friendly product menus have just started. Accordingly, as the introduction policy on environmentally friendly products, there was found nothing valuable but the regulations. 12 refs., 3 figs., 15 tabs.

FY 1998 report on the results of the development in recycling technology for building materials such as waste concrete; 1998 nendo hai concrete nado kenzai recycle gijutsu no kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

For increasing fields of application of concrete rubble discharged as construction waste, the recycled aggregate is recovered by heating and rubbing/grinding. To meet the recycling demand effectively, a unit was made a transfer type. Equipment with treatment capacity of 3 tons/h was manufactured and confirmed of its motion. As to the heating equipment, the low-energy consumption structure aiming at homogeneous filling and appropriate ventilation was adopted to control uneven heating and increase in packed bed pressure loss. A tube mill type of the coarse aggregate recovery device was designed/manufactured considering the size of medium and discharge of mortal particles. An attriter type was designed/manufactured considering smooth particle discharge. As to the fine aggregate recovery system, a tube mill type was designed considering the discharge of powder and using coarse aggregate as medium. Moreover, the appropriate transportation of the generated powder and storage method are also considered. The transfer type equipment (unit frame, etc.) was designed/manufactured to make it a unit considered of layout at the time of transporting and assembling the auxiliary equipment such as supply hopper. The noise prevention device was also equipped with. (NEDO)

FY 1999 survey report on the survey to grasp new technologies for destruction of freons, etc. in Japan; 1999 nendo Nippon no atarashii freon nado hakai gijutsu no haaku chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

At the end of 1995, a total abolition of the production of the specified freons (CFC) was achieved. In future, it will be important to proceed with the appropriate recovery/destruction of the CFC, etc. which has been used so far, not only for the protection of ozone layer, but for the prevention of global warming. For the international study of facilities (technology) for destruction CFC, etc., the Technical Assessment Committee (TAC) was installed for destruction technology of ozone layer depletion substances (ODS) under the United Nations Environment Programme (UNEP), and the destruction efficiency (DE) of ODS was set up. In Japan, more than 30 facilities are already handling the destruction of CFC on a commercial basis. The number is expected to increase by the promotion of protection of ozone layer and prevention of global warming. This survey indicated quantitatively and qualitatively based on the TAC DE what the facilities for destruction of CFC should be which were considered of domestic laws in Japan, and was made a guide for existing facilities and ones to be newly installed. (NEDO)

Report on the project for spread/promotion of technology for the industrial waste optimized treatment in the Asian region; Asia chiiki sangyo haikibutsu tekiseika shori gijutsu nado fukyu sokushin jigyo hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The International Symposium `98 on the industrial waste problem in the Asian region was held in Tokyo on February 18, 1998. MITI commented on the present situation of the industrial waste problem in Japan and Japan`s environmental tackling toward the Asian region, and also Asian countries (China, the Philippines, Thailand and Korea) made reports. Japan reported on environmental preservation measures taken in the industrial circle, the industrial waste problem at companies which advanced into Asian countries, effects of the Basel Convention (which restricts border-crossing movement of harmful wastes) on recycle activities, Japan`s role in Asia, etc. In the panel discussion, discussions were made on human interchange in the informatization, recycling technology, shortage of personnel concerned with environmental protection, construction of a network in the Asian region and Japan` s role, etc. As to the treatment system for waste, the necessity was recognized of studying systems which meet with actual states of each country. It is also necessary to go on with discussing how the system should be for cooperation between governments and private companies. Importance of the recycle and information exchange was emphasized. 10 refs., 14 figs., 27 tabs.

Estado nacional, Iglesia católica y sociedad. La síntesis de una interrelación en un espacio local: Tiríndaro, Michoacán

Directory of Open Access Journals (Sweden)

Jesús Solís Cruz

2015-01-01

Full Text Available Luego de un período secularizador enérgico en México (Leyes de Reforma, se registró en el Porfiriato un tácito concordato con la Iglesia católica que fue cuestio-nado en la fase de construcción del Estado derivado de la Revolución Mexicana. Con la afirmación de su soberanía política, el Estado nacional posrevolucionario asumió funciones educativas, moralizantes y de reforma social en oposición a la labor que había venido realizando la Iglesia católica. En este artículo examino desde la historia social y política, la impronta que el Estado Nacional y la iglesia católica han fijado en una sociedad local. Se destaca cómo en la apropiación y contestación que los actores locales hacen de los particulares proyectos de sociedad de las dos institu-ciones, se generan sentidos de vida.

Modelización de una situación real con tabletas: el experimento de la pelota

Directory of Open Access Journals (Sweden)

Miriam Ortega Pons

2015-07-01

Full Text Available En este estudio presentamos una experiencia llevada a cabo en una clase de 1o de bachillerato con un modelo de enseñnanza diseñnado para trabajar los conceptos de familia de funciones y parametro a traves de la modelizacion. Dicho modelo tiene la caracterstica de que los datos usados son obtenidos por los propios estudiantes en el aula usando tabletas y de que incluye elementos que permiten guiarlos en la realizacion de una buena gestion del proceso de modelizacion. El analisis posterior de los resultados revelo que la realizacion de un analisis cualitativo previo del fenomeno estudiado así como los conocimientos que poseen los estudiantes sobre las famlias de funciones y el signicado de los parametros son elementos clave en la gestion y el control de todo el proceso. Tambien obtuvimos informacion acerca de las concepciones de los alumnos sobre los conceptos de altura y tiempo.

Mechatronization of rotating machines in plant; Plant ni okeru kaiten kikai no mechatronics ka

Energy Technology Data Exchange (ETDEWEB)

Kikuchi, H. [Chiyoda Corp., Tokyo (Japan)

1993-10-01

This paper introduces mechatronization of rotating machines in a plant, with application examples of electronic governors as the main subject. For centrifugal compressors, design and fabrication of anti surging control system have become possible by using a programmable logic controller (PLC) and a distributed control system (DCS) with fine scanning time. An electronic governor for turbine control has been added with a function to control amount of power generated by a motive force recovery device in a flowing catalytic cracking equipment by means of an expander inlet valve. This has made possible to operate the motive force recovery device automatically even under a low load operation. With an electronic governor to control supply and receipt amount of steam to and from an existing plant, the governor valve opening angles were so controlled that actual steam header pressure matches the setting, whereas the steam has become possible to be utilized without waste under normal operation. Operation of a comprehensive compressor/turbine monitoring system on DCS, operation of centrifugal compressors of two casings by using electromagnetic bearings, and motor speed control with use of an inverter heve also become possible. 8 figs., 2 tabs.

Report for fiscal 2000. Part 4. Research on assistance to put recycling technologies into practical use (Research and development of elevating automotive fuel consumption and exhaust gas technologies); 2000 nendo recycle gijutsu nado jitsuyoka shien kenkyu hokokusho. 4. Jidosha nenpi hai gas gijutsu kodoka kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Discussions have been given on identification of actual status of exhaust gas emission during driving, starting, and idling of automobiles, on technologies to enhance fuel consumption and reduce exhaust gas emission, and on technologies to measure harmful substances. In the investigation of effects of environmental temperatures on evaporation gas, it was shown that fuel evaporation generated from the fuel tank increases as the average ambient temperature rises. In the investigation of effects of environmental temperatures on exhaust gas and fuel consumption, it was discovered that the effects of environmental temperatures on 10{center_dot}15 mode regulated exhaust gas differ depending on vehicles, and no definite difference due to combustion systems was recognized. Carbon monoxide and THC under the 11 mode regulation showed a trend to increase when the environmental temperature falls down. In the investigation of effects of fuel properties on exhaust gas, no definite difference due to combustion systems was recognized as a result of measurements using various types of gasoline having different distillation properties. In the investigation of analysis methods for harmful substances, development has been made on an analysis method mainly for 1-3 butadiene. (NEDO)

Fiscal 1999 research and verification of geothermal energy exploring technologies and the like. Development of reservoir mass and heat flow characterization (Development of reservoir change prediction technology - Summary); 1999 nendo chinetsu tansa gijutsu nado kensho chosa hokokusho (yoyaku). Choryuso hendo tansaho kaihatsu (choryuso hendo yosoku gijutsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Efforts are exerted to develop technologies for accurately predicting reservoir expansion or other changes through a comprehensive analysis of the fracture hydrology method, gravity monitoring method, electrical and magnetic monitoring method, seismic monitoring method, and their associated technologies. The endeavors cover the development of a post processor system which involves gravity, self-potential, geochemistry, resistivity, etc., and is related to a reservoir simulator, and the development of a reservoir modelling technology. For the development of a post processor system, efforts continue (1) to develop a processor to deal with gravity, self-potential, resistivity, and geochemistry, (2) to carry out basic studies of changes in seismic propagation characteristics, (3) to develop databases, and (4) to develop a simulator interface. Under item (1), development involving gravity, self-potential, and geochemistry is complete, and now manuals are being prepared. A prototype design is complete for resistivity. For the development of a reservoir modelling technology, modelling is under way for the Onikobe and Sumikawa districts. Existing data are taken care of, and productivity predicting simulation is carried out. (NEDO)

Report on achievements in fiscal 1999. Development of technology to utilize biological resources such as composite organism systems (development of technology to utilize and produce composite organism systems); 1999 nendo fukugo seibutsukei nado seibutsu shigen riyo gijutsu kaihatsu seika hokokusho. Fukugo seibutsukei riyo seisan gijutsu no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

It is intended to achieve the following objectives in terms of the technologies to utilize such functions as material production and material decomposition by using composite organism systems: develop a technology to handle the composite organism systems; establish a composite microorganism cultivation control technology, and a composite microorganism system function strengthening technology; develop a technology to separate and cultivate organism groups constituting them, and develop industrial utilization technologies. The fiscal 1999 has discussed developing the elementary technologies for the technology to utilize functions of the composite organism systems on the following research items: 1. a functional material production technology; and 2. comprehensive investigations and researches. In Item 1, development was made on a technology to detect, separate and cultivate microorganisms in soil as the histochemical analytical technology. Development was made on an in situ detection, separation and function analyzing technology for particular composite microorganisms as the function analyzing technology. In the separation and cultivation technology, development was made on a technology to detect, separate and cultivate difficult-to-cultivate microorganisms. In the functional material production technology, development was made on a technology to utilize microbial consortia producing environmentally harmonizing oil-water separating polymers, and a method to execute artificially the gene exchange in the microbial consortia. (NEDO)

Proposta de teste incremental baseado na percepção subjetiva de esforço para determinação de limiares metabólicos e parâmetros mecânicos do nado livre Propuesta de un test adicional basado en la percepción subjetiva del esfuerzo para determinar los límites metabólicos y los parámetros mecánicos del nado libre Incremental test proposal based on the rating of perceived exertion to determine metabolic thresholds and mechanical parameters of free style

Directory of Open Access Journals (Sweden)

Manoel Carlos Spiguel Lima

2006-10-01

Full Text Available A percepção subjetiva de esforço (PSE é determinada de forma não invasiva e utilizada juntamente com a resposta lactacidêmica como indicadores de intensidade durante teste incremental. Em campo, especialmente na natação, há dificuldades nas coletas sanguíneas; por isso, utilizam-se protocolos alternativos para estimar o limiar anaeróbio. Assim, os objetivos do estudo foram: prescrever um teste incremental baseado na PSE (Borg 6-20 visando estimar os limiares metabólicos determinados por métodos lactacidêmicos [ajuste bi-segmentado (V LL, concentração fixa-3,5mM (V3,5mM e distância máxima (V Dmáx]; relacionar a PSE atribuída em cada estágio com a freqüência cardíaca (FC e com parâmetros mecânicos de nado [freqüência (FB e amplitude de braçada (AB], analisar a utilização da escala 6-20 na regularidade do incremento das velocidades no teste e correlacionar os limiares metabólicos com a velocidade crítica (VC. Para isso, 12 nadadores (16,4 ± 1,3 anos realizaram dois esforços máximos (200 e 400m; os dados foram utilizados para determinar a VC, velocidade de 400m (V400m e a freqüência crítica de braçada (FCb; e um teste incremental com intensidade inicial baseada na PSE, respectivamente, 9, 11, 13, 15 e 17; sendo monitorados em todos os estágios a FC, lactacidêmia e os tempos de quatro ciclos de braçadas e das distâncias de 20m (parte central da piscina e 50m. Posteriormente, foram calculadas as velocidades dos estágios, FB, AB, V LL, V3,5mM e V Dmáx. Utilizaram-se ANOVA e correlação de Pearson para análise dos resultados. Não foram encontradas diferenças entre VC, V Dmáx e V LL, porém a V3,5mM foi inferior às demais velocidades (P La Percepción Subjetiva del Esfuerzo (PSE es determinada de forma no invasiva y utilizada juntamente con la respuesta lactacidémica como indicadores de intensidad durante un test de incremento. En campo, especialmente en la natación, hay dificultades en las colectas

FY 1999 Report on the results of technological development of machine tools for rationalization of energy utilization. Development of a lathe with high precision and conservation of energy using natural phenomenon (Thermal countermeasure using self compulsory cooling and thermal insensitive structure - results of the first year); 1999 nendo energy shiyo gorika kosaku kikai nado gijutsu kaihatsu seika hokokusho. Shizen gensho wo takumi ni oyoshita sho energy koseido senban no kaihatsu (self kyosei reikyaku to netsufukan gijutsu wo mochiita netsuhenkei yokusei taisaku - dai 1 nendo)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

A lathe, which is a central tool in a factory of automobiles or home electric appliances, tends to suffer decreased machining precision resulting from thermal deformation. This project is aimed at development of the energy-saving, high-precision lathe technologies using self compulsory cooling and thermal insensitive technologies as the countermeasures against the thermal deformation. The self compulsory cooling is a method of cooling by evaporation of water with an evaporative, water-absorptive cloth being bonded to a machine tool surface around the major axis. The thermal insensitive technologies include the three-dimensionally zero-center design technologies which help design a lathe in such a way to set the processing point (tool working point) at the base of thermal deformation in the X, Y and Z axis directions; material combination technologies to control thermal deformation; and coloring technologies to control thermal deformation. The development target is the high-precision lathe fabrication technologies, which realize a temporal precision change of 1 to 2 {mu}m or less per work dimension of 100mm. The activities cover 5 areas, including development of elementary technologies for each item and construction/evaluation of the full-size test unit. (NEDO)

Advanced research and development of gas hydrate resources. R and D of exploration and others - R and D of excavation technologies and others - surveys/researches on methods of evaluating environmental effects - surveys/researches on application systems; Gas hydrate shigenka gijutsu sendo kenkyu kaihatsu. Tansa nado ni kansuru kenkyu kaihatsu / kussaku gijutsu nado ni kansuru kenkyu kaihatsu / kankyo eikyo hyokaho no chosa kenkyu / riyo system ni kansuru chosa kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Gas hydrate is a clathrate compound in a gaseous molecule as the host, stable under relatively mild environments. It is deposited in the 600m or deeper sea bottoms to form the gas hydrate deposit and massively occurring in the sea areas around Japan. This deposit has been studied viewed from natural gas resources, causes for natural hazards and contribution to the global warming. This project excavates a well in the deposit, to study possibilities of the technologies for decomposing, fluidizing and lifting the hydrate as the gas source, and for establishing the natural gas transporting/mooring systems in which its characteristics are utilized. The R and D activities are directed to the 4 areas, (1) development of the exploration technologies to determine the deposit sea area, quantity and conditions, (2) development of the stable well-excavation technologies, (3) studies on the effects of gas production on the environments, and development of the system for predicting the effects, (4) and studies on the application systems. The item (3) finds out the transportation/storage system possibly more economical than the current freezing/liquefaction technologies. The item (3) has the development themes of evaluating the geohazards caused by excavation and gas production, and their effects on the ecological systems. (NEDO)

FY 2000 International energy use rationalization project. International technology dissemination project for improving energy consumption efficiency (Green helmet project for steel heating furnaces in Thailand); 2000 nendo kokusai energy shiyo gorika nado taisaku jigyo chosa hokokusho. Kokusai energy shohi koritsuka nado gijutsu fukyu jigyo (Green helmet jigyo (Tai: kozai kanetsuro))

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

The project for energy saving dissemination activities and technological assistance for Thailand is carried out, and the FY 2000 results are reported. For Siam Iron and Steel (SISCO), the experts are dispatched for reviewing the operating conditions of the facilities constructed by the model project, their maintenance and examination, time series diagnosis of the recuperator performance, and providing technical assistance for fuel consumption and high-load combustion of the downstream unit. Furthermore, the site survey and technical assistance are provided for two newly selected Thai steel enterprises, Sahaviriya Steel Industries Public Co. (SSI) and the Bangkok Iron and Steel Works Co. (BISW). For SSI, it is predicted that energy of approximately 50Mcal/ton can be saved by, e.g., enhancement of waste heat recovery, enhancement of heat insulation of skid pipes, introduction of steel discharging temperature prediction system, and combustion control. For BISW, it is predicted that energy of approximately 25Mcal/ton can be saved by, e.g., enhancement of waste heat recovery and reduction of heat loss in the waste gas. (NEDO)

FY 1999 report on the results of the R and D on the assessment of reliability of oil refining facilities; 1999 nendo sekiyu seisei setsubi shinraisei hyoka nado gijutsu kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

At present, in oil refineries in Japan, the term of the continued operation in oil refining facilities is shorter than that in Europe and America because of the regulation on the open inspection period for boilers and hazardous material storage tanks. As a result, the refining cost is comparatively higher than in Europe and America due to the increase in inspection/repair cost and decrease in operational rate. Therefore, it is becoming important to effectively supply petroleum products by keeping stability in oil refining facilities of the whole Japan and prolonging the term of the continued operation of oil refining facilities, etc. In this R and D, the technical development is conducted which is needed for the long-term continued operation of oil refining facilities. The items for the R and D are as follows: assessment technology of reliability of oil refining high temperature system facilities, assessment technology of reliability of piping/storage facilities in oil refinery, assessment technology of reliability of oil refining power system facilities, technology of management support system in oil refining facilities. In this fiscal year, technical survey, data collection, and construction of the basic concept of developmental technology were mostly conducted. Also conducted were trial manufacture of various probes for non-fracture inspection use, oscillators, etc., and basic design of inspection equipment and trial manufacture of a part of them. And the data acquired were analyzed. (NEDO)

Fiscal 1998 research report. Popularization project of the proper treatment technology of industrial wastes in Asian regions; 1998 nendo chosa hokokusho. Asia chiiki sangyo haikibutsu tekiseika shori gijutsu nado fukyu sokushin jigyo

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

Study was made on popularization of the proper treatment technology of industrial wastes in Asian regions. In principle, industrial wastes should be recycled in a country concerned, however, because of a difference in technology and industrial location, treatment of all industrial wastes in a country concerned is impossible. International cooperation is thus indispensable to promote proper efficient practical measures for environment. For studying the possibility of the international cooperation between Japan and Asian countries concerned for further recognition and solution of industrial waste problems, 'International Symposium on the Asian Industrial Waste Issue' have been held in Tokyo since 1997 for governmental staffs. In fiscal 1998, Malaysia was invited in addition to China, Philippines and Thailand for popularization of the proper treatment and recycling of industrial wastes in Asian regions. In every Asian countries, poor collection of discharge, treatment and disposal data is an obstacle to effective treatment. Technical cooperation and financial support by developed countries are demanded. (NEDO)

1998 Annual Study Report. Surveys on seeds for global environmental technologies, including those for energy saving; 1998 nendo chosa hokokusho. Sho energy nado chikyu kankyo taisaku gijutsu no seeds ni kansuru chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

The energy-saving and other global environmental technologies are surveyed by collecting relevant information from various institutes, both abroad and domestic, to contribute to development of ceramic gas turbines. USA has announced a climate change plan, based on the five principles, to promote utilization of high-efficiency technologies and development of new clean technologies. UK is promoting to improve energy efficiency, along with liberalization of its energy markets. Germany concentrates its efforts in the 'Program for Energy Research and Energy Technologies.' France places emphasis on prevention of air pollution and rational use of energy. The R and D trends at public institutes, e.g., universities, for global environmental technologies are surveyed, from which a total of 14 themes are extracted as the seed technologies. At the same time, a total of 9 techniques potentially applicable to the seeds are extracted by mainly reviewing JICST and patent information, and assessed. The R&D trends of the IPCC-related researchers are also surveyed, but provide no theme directly applicable to the seeds. Most of the related themes at the private and public institutes surveyed, both domestic and abroad, are concentrated on carbon dioxide. (NEDO)

Fiscal 2000 survey of geological structures overseas. Exchange of engineers with Indonesia (Coal mining technology); 2000 nendo kaigai chishitsu kozo nado chosa hokokusho. Gijutsusha koryu jigyo (tanko gijutsu bun'ya) Indonesia

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Indonesia rich in coal resources consumed 70-million tons of coal in 1999, which covered 17% of its total energy demand. It is estimated that as much as 120-million tons will be produced in 2005, and it is expected that underground mining will increase. Under such circumstances, Indonesia strongly desires that Japan's underground mining technologies be transferred to Indonesia. For the transfer of technologies especially involving production control and management out of Japan's underground mining technologies, Japan dispatched engineers to Indonesia under a mining engineer exchange project, and received and trained Indonesian engineers. Under the engineer exchange project, five engineers were dispatched to Indonesia and gave lectures and on-site training in the period July 9 through August 5, 2000. Japan received seven engineers, who were given lectures and training at the Ikeshima mining field of Matsushima Coal Mining Company in the period November 12 through December 12, 2000. (NEDO)

Fiscal 1998 research report on information structuring technology for advanced use of NEDO research reports; 1998 nendo NEDO seika hokokusho nado no kodo riyo ni hitsuyona joho kozoka gijutsu no chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Research was made on electronic NEDO research reports corresponding to the recent extending trend of Internet. The logical structure and electronic format of NEDO research reports as document were first studied considering document disclosure and reuse of technical information. HTML as electronic format for Internet is unfortunately insufficient to describe the logical structure of NEDO research reports because of HTML's restricted description. Thus, XML which is being watched because of its possible definition of original tags was studied in place of HTML. As a result, because at present preparation of standards on XML and a compatibility for implementation of standards are insufficient, it was concluded that construction of the electronic document system for NEDO research reports is still too early. However, since adoption of XML as document format is important from the viewpoint of a property succession on Internet, preparation of the XML format file of NEDO research reports is essential. (NEDO)

Fiscal 1999 report on results. Development item, 'development of evaluation technique for biocompatibility and the like of porous materials'; 1999 nendo takozairyo no seitai tekigosei nado hyoka gijutsu no kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

With the purpose of establishing fundamental technologies for ceramic porous materials that are excellent for artificial bone for a living body, evaluation technologies were developed for mechanical properties and biocompatibility, with fiscal 1999 results compiled. Performed for the examination of the mechanical properties were flexural test, compression test, tensile test, shearing test, torsion test, fatigue test, etc., with an evaluation testing method studied assuming that ceramic porous materials were applicable to implanting members. In the evaluation of biocompatibility, five kinds of osteoblast-like cell lines were cultured on a plastic disk and a dense hydroxyapatite disk, with adhesion and proliferation of the cells compared. Since these osteoblast-like cell lines adhere and proliferate on the surface and in the pore of hydroxyapatite, evaluation of the biocompatibility such as cell affinity was found possible with this in vitro method. With the view of obtaining principles for designing new bioactive ceramics, a method was developed for evaluating apatite-forming abilities of metal oxide gels having different compositions and structures in simulated body fluid. (NEDO)

Fiscal 1998 research report. Popularization project of the proper treatment technology of industrial wastes in Asian regions; 1998 nendo chosa hokokusho. Asia chiiki sangyo haikibutsu tekiseika shori gijutsu nado fukyu sokushin jigyo

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

Study was made on popularization of the proper treatment technology of industrial wastes in Asian regions. In principle, industrial wastes should be recycled in a country concerned, however, because of a difference in technology and industrial location, treatment of all industrial wastes in a country concerned is impossible. International cooperation is thus indispensable to promote proper efficient practical measures for environment. For studying the possibility of the international cooperation between Japan and Asian countries concerned for further recognition and solution of industrial waste problems, 'International Symposium on the Asian Industrial Waste Issue' have been held in Tokyo since 1997 for governmental staffs. In fiscal 1998, Malaysia was invited in addition to China, Philippines and Thailand for popularization of the proper treatment and recycling of industrial wastes in Asian regions. In every Asian countries, poor collection of discharge, treatment and disposal data is an obstacle to effective treatment. Technical cooperation and financial support by developed countries are demanded. (NEDO)

FY 2000 report on the survey on the long-term energy technology strategy, etc. - Basement technology for implementation of industrial technology strategy. Survey on the extraction of preferential important technical subjects in FY 2002; 2000 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho - sangyo gijutsu senryaku sakutei kiban chosa. 2002 nendo yusenteki juyo gijutsu kadai no chushutsu ni kansuru chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

This survey is to investigate the consciousness of researchers and engineers of enterprises, universities, etc, of the importance of about 100 important technical subjects in 'the industrial technology strategy' prepared by the Ministry of Economy, Trade and Industry. In the questionnaire survey, the following were selected: 1)systematization of policy in consideration of the social needs and R and D of the technology to realize it; 2) R and D of the technology to advance the future frontier; 3) technical subjects that the government should promptly start to tackle in each classification in arrangement of the intellectual basis. Answers to the following items were obtained: 'selection reasons' for why it was considered important in each technical subject, 'lead time' toward the time of the industrialization, 'international positioning' of Japan against Western countries, 'possibility of heightening/maintaining the international competitive force,' and 'items that the government should participate in.' In 1), the following four big targets were arranged: 'security/safety,' 'informatization,' 'environment' and 'energy'. In 2), the following technical subjects were arranged: 'biotechnology,' 'information communication technology,' 'production technology,' 'materials/process technology,' 'energy/environment' and 'new blending/traversable/integrated technology.' In the results of the survey, analyzed were big targets, and trends and characteristics at technical field levels. (NEDO)

FY 1998 research result report. Ultra-high liquid crystal technology development for energy use rationalization (Technology of design/control/analysis of new functional electronic materials of the ultra-high electronic technology development promotion project); 1998 nendo kenkyu seika hokokusho. Energy shiyo gorika chosentan ekisho gijutsu kaihatsu (chosentan denshi gijutsu kaihatsu sokushin jigyo shinkino denshi zairyo sekkei seigyo bunseki nado gijutsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-05-01

Element technology is studied to realize a reflective-type, full-color, and high-resolution liquid crystal display for super-low power consumption data display. As to the functional compound microstructure formation technology, a 4-inch panel was trially fabricated using two-layer guest-host liquid crystal technology to achieve the desired display performance by control of molecular orientation. Further, holographic PDLC elements were favorably test-fabricated. A ferroelectric PZT thin layer was formed by forming layer at low temperature at which a glass substrate can be used. Optical interference/optical dispersion type optical control materials were studied by liquid crystal/polymer composition. Also studied were super-pure/super-reliable liquid crystal compound/liquid crystal composite systems and super-anisotropic liquid crystal compound by modeling ionic impurities and liquid crystal molecular interaction. In relation to the control technology of optical reflection characteristics, effects of liquid crystal molecular structures (derivative effect and copolymer composition) on orientation were elucidated. As to the technology to form multi-dimensional anisotropic structures, efforts were made for the heightening of formation technology of simple RGB (red, green, blue) directional reflection layers using acrylate materials. The paper also outlined the comprehensive survey. (NEDO)

Achievement report in fiscal 2000 on technical development to recycle waste building materials and glasses. Development of waste building material recycling technology (Research and development of wooden board manufacturing technology using demolished building lumbers); 2000 nendo kenchiku glass nado recycle gijutsu kaihatsu seika hokokusho. Kenhciku haizai recycle gijutsu kaihatsu (kenchiku kaitai mokuzai wo mochiita mokushitsu board seizo gijutsu no kenkyu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Research and development has been made on a wooden board manufacturing technology re-utilizing demolished building lumbers and waste plastics with an intention of saving resources and reducing wastes. This paper summarizes the achievements in fiscal 2000. In developing the technology to re-use demolished building lumbers, a method for removing metals attached to demolished building lumbers was established by using a magnetic separator and a metal detector, with which it was verified that iron can be removed nearly 100%. With regard to waste plastics, simultaneous use of specific gravity separation utilizing centrifugal force and electrostatic separation provided a prospect that metals and plastics of high melting points can be removed from mixed resins in waste household electric appliances, and that polypropylene (PP), polystyrene (PS), and ABS can be classified at high accuracy. In manufacturing waste wood and waste plastic boards, pilot plants were built to use the 'melt spray method', 'melt blow method', and 'laminating method' as the means to spray molten resin onto wood raw materials, wherein trials were performed on mixing molten resins with wood flakes, and on board forming. (NEDO)

Fiscal 2000 research achievement report on the development of super-advanced liquid crystal technology for energy use rationalization. Development promotion project for super-advanced electronic technology - Design, control, analysis, etc., of electronic materials having novel functions; 2000 nendo energy shiyo gorika chosentan ekisho gijutsu kaihatsu seika hokokusho. Chosentan denshi gijutsu kaihatsu sokushin jigyo (shinkino denshi zairyo sekkei seigyo bunseki nado gijutsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-04-01

Efforts are focused on the verification of target devices under the respective subjects, and activities are conducted with the development system reinforced. Three newly proposed reflection type liquid crystal devices achieve the target specifications of a reflection factor of 60% or higher and a contrast ratio of 15:1 or higher. Studies are conducted involving the five fields of (1) multilayer reflection devices, (2) memory retention liquid crystal devices, (3) single pixel color devices, (4) directional reflection devices, and (5) joint research. Research and development in field (1) covers ultra-anisotropic optical materials, ultrahigh reliability host liquid crystal materials for guest-host liquid crystals - mixed system, low voltage driven/high load holding liquid crystal compound systems, and new liquid crystal molecule orientation control technology; in field (2), low temperature fabrication of ferroelectric thin film, and ultrahigh purity high reliability liquid crystal compounds; in field (3), materials capable of controlling optical interference and higher order light scattering, photoregulation devices, highly birefringent liquid crystal materials - mixed system, and ultrahigh efficiency light scattering liquid crystal compounds; and, in field (4), multi-dimensional anisotropic structure fabrication technology and ultra-anisotropic optical materials. (NEDO)

Efeito do uso do traje de neoprene sobre variáveis técnicas, fisiológicas e perceptivas de nadadores Effects of a neoprene suit over technical, physiological and perceptive variables of swimmers

Directory of Open Access Journals (Sweden)

Karini Borges dos Santos

2011-06-01

Full Text Available Ao contrário do que ocorre em provas de piscina, competições em águas abertas estão sujeitas as condições ambientais, sendo uma delas as baixas temperaturas. Em determinadas circunstâncias é permitido o uso de roupas especiais para evitar hipotermia. O objetivo do estudo foi verificar os efeitos do uso da roupa de neoprene em um grupo composto por triatletas e nadadores, comparado ao uso de vestimentas convencionais (sunga sobre variáveis cinemáticas e psicofisiológicas do nado. Participaram 20 homens (12 triatletas e oito nadadores de idade 22,0 ± 6,6 anos com desempenhos que correspondem a 75 ± 7,7% do melhor tempo brasileiro na prova de 400 m. Os atletas realizaram duas repetições máximas e duas submáximas de 400 m em nado "crawl", com e sem o uso da roupa de neoprene. Foram comparadas a velocidade média (VM, comprimento de braçada (CB, frequência de braçada (FB, índice de nado (IN, percepção subjetiva de esforço (PSE, frequência cardíaca (FC, e concentração de lactato sanguíneo (LAC. Um conjunto de ANOVAs com medidas repetidas do tipo "two-way" foi aplicado. Quando diferenças foram encontradas o teste de Tukey foi empregado. Com o traje de neoprene, em máxima intensidade, o tempo para nadar a distância foi 6,4% menor, com manutenção da FB e aumento da CB, as variáveis psicofisiológicas não diferiram estatisticamente. Em esforço submáximo, o uso do traje de neoprene resultou em menor FB, maior CB, maior IN e em menores valores de FC, LAC e PSE (p In open water swimming competitions, athletes are prone to environmental conditions and are frequently exposed to low temperatures, in contrast to what occurs in indoor competitions. In some circumstances the use of special swimming suits is allowed to avoid hypothermia. The aim of this study was to verify the effects of the use of a neoprene swimming suit in comparison to a conventional swimming suit on a number of cinematic and psychophysiological variables

FY 1999 New Sunshine Project survey research project - Survey on the long-term energy technology strategy, etc. Fundamental survey to decide on the industrial technology strategy - Technology strategy by field (Electronic information technology field - Human process ware technology field of the computer relation field); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (denshi joho gijutsu bun'ya (computer kanren bun'ya no uchi, human process ware gijutsu bun'ya)))

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The survey/study were conducted to contribute to proposing technology strategies such as the analysis of the present state of technical competitive force and the forecast in the human process ware industry technology field of the computer relation field. The human process ware is a system aimed at fermenting human power for thinking, problem solution and creation. Its main subjects are the following three: close society technology for will communication by automatically learning backgrounds of people joining the community; topics community technology for community formation for the appropriate people/organizations by grasping true topics/purposes from conversation; active interaction technology for supporting creative activities of users/community and making conversation with users. Further, in the region of the technology to meet the requests/restrictions from the society, the following are expected: energy/resource conservation; realization of the life with ease/safety and of high quality in the aged society; realization of the advanced information network society which becomes the basis of a new economic society. (NEDO)

FY 1999 report on the results of the study to support the commercialization of recycling technology, etc. 4. R and D for enhancement of automobile fuel consumption/exhaust gas technology; 1999 nendo recycle gijutsu nado jitsuyoka shien kenkyu seika hokokusho. 4. Jidosha nenpi hai gas gijutsu kodoka kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

For the purpose of clarifying measures for reducing fuel consumption and exhaust gas of automobiles, survey was made of effects of environmental temperatures and fuel properties on exhaust gas. In the survey of effects of environmental temperatures, experiment on exhaust gas was carried out by changing the laboratory temperature from 5 degrees C to 35 degrees C using direct injection gasoline engine. As a result, it was found out that environmental temperatures have effects exhaust gas according to changes in purification rate by rise in catalytic temperature, changes in air/fuel ratio by changes in air density, control methods to secure starting-up/drivability, etc. In the survey of effects of gasoline properties, study was made on effects of distillation properties, especially, 90% distillation temperature (T90) on exhaust gas. As a result, in 10(center dot)15 mode, CO and THC decreased with a decrease in T90 both in three-way catalytic car and direct injection car. Especially, CO decreased to about 1/4 when decreasing T90 from 151 degrees C to 116 degrees C. NOx increased in three-way catalytic car and decreased in direct injection car with a decrease in T90. (NEDO)

Comportamento de variáveis fisiológicas em atletas de nado sincronizado durante uma sessão de treinamento na fase de preparação para as Olimpíadas de Atenas 2004 Comportamiento de variábles fisiológicas en atletas de nado sincronizado durante una sesion de entrenamiento en la fase de preparación para las Olimpíadas de Atenas 2004 Behavior of physiological variables in synchronized swimming athletes during a training session preparing for the Athens 2004 Olympic Games

Directory of Open Access Journals (Sweden)

Marina Guimarães Antunes Pazikas

2005-12-01

Full Text Available O objetivo do presente estudo foi avaliar o comportamento de variáveis fisiológicas durante uma sessão de treino de nado sincronizado realizada na fase de preparação para as Olimpíadas de Atenas 2004. MATERIAIS E MÉTODOS: A amostra utilizada foi constituída pelo dueto (24 ± 0 anos representante do Brasil em Atenas 2004. A coleta de dados foi realizada durante uma sessão de treinamento com duração de 198 minutos. O treino se iniciou com a parte física, seguida da parte técnica. Para a determinação da glicemia e da concentração de beta-hidroxibutirato foi utilizado o monitor Optium® com suas respectivas tiras. As concentrações de cortisol e das enzimas lactato desidrogenase (LDH e creatina quinase (CK foram determinadas por radioimunoensaio (DPC© e kits comerciais (CELM®, respectivamente. O acompanhamento da freqüência cardíaca (FC foi realizado com o freqüêncimetro Advantage Polar®. RESULTADOS: Foi observada redução (~2% do peso corporal. A glicemia também apresentou queda (~30% em comparação ao valor obtido no início do treino. Em contrapartida, foi observada elevação na concentração de cortisol (salivar 22% e plasmática 29% e de beta-hidroxibutirato (~340%. Não foi observada alteração significativa na concentração plasmática de CK e de LDH. O acompanhamento da FC demonstrou que dos 198 minutos que constituíram a sessão de treino, 36,5 ± 0,7 minutos foram realizados em intensidade leve; 103,5 ± 0,7 minutos em intensidade moderada, 54,0 ± 2,1 minutos em intensidade alta e 4,0 ± 0,0 minutos em intensidade muito alta. CONCLUSÕES: A perda de peso indica que a reposição hídrica não foi adequada. A redução na glicemia e o aumento na concentração de corpos cetônicos e de cortisol reforçam a importância da suplementação de carboidrato durante o treino de longa duração. O comportamento da FC demonstra que a sessão de treinamento foi realizada em uma intensidade moderada, porém com

Confirmation study of the effectiveness of prospect techniques for geothermal resources. Deep-seated geothermal resources survey report (Fiscal year 1994); 1994 nendo chinetsu tansa gijutsu nado kensho chosa. Shinbu chinetsu shigen chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

Drilling and survey of deep geothermal exploration wells were conducted to grasp the existing situation of deep geothermal resource and the whole image of geothermal systems in the area where geothermal resource was already developed. In the drilling work in fiscal 1994, 4000m-class rigs and the top drive system were planned to be used for drilling of 12-1/4 inch wells, but 9-5/8 inch liners were used for drilling down to depths of 2550m or deeper since the amount of lost circulation is large and the withdrawal of devices may be very difficult. And in 8-1/2 inch wells, the well was drilled down to a depth of 2950m. As to the deep resistivity exploration technology using electromagnetic method, studies were made of a multiple-frequency array induction logging (MAIL) method, a vertical electromagnetic profiling (VEMP) method, a joint analysis method, etc. Concerning the synthetic fluid inclusion logging technology, containers were lowered into the well and a comparison was made between data of the homogenization temperature analysis of the formed fluid inclusion and those of the temperature log analysis. With relation to the making of deep geothermal structural models, revision was made according to the determination of depths of Miocene formations, Pre-tertiary formations, and the Kakkonda granite. 65 refs., 268 figs., 79 tabs.

Confirmation study of the effectiveness of prospect techniques for deep geothermal resources. Deep-seated geothermal resources survey report (Fiscal year 1993); 1993 nendo chinetsu tansa gijutsu nado kensho chosa. Shinbu chinetsu shigen chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-03-01

Drilling and survey of deep geothermal exploration wells were conducted in order to grasp the existing situation of deep geothermal resource and the whole image of geothermal systems in the area where geothermal resource was already developed. Following fiscal 1992, the well was drilled in fiscal 1993 down to depths of 605m-1505m, and a 13-3/8 inch casing was inserted down to a depth of 1500m. In the drilling, four cores including oriented cores were sampled, and microscopic observation, X-ray diffraction analysis, fluid inclusion survey, core property test, etc. were conducted. In the FMI logging, detected were 273 bedding planes, 483 fractures, etc. Further made were a velocity structure survey, a gravity survey in the area of 270 km{sup 2} including deep exploration wells, a quality survey of the Kakkonda river water, etc. As to geothermal structure models in the Kakkonda area, results of the drilling were added to prediction models before drilling deep exploration wells, but the revision was not very much. Besides, studies were made of a survey method using microearthquakes, a survey technique using resistivity, etc. 61 refs., 259 figs., 95 tabs.

Fiscal 1996 achievement report. Development of liquid fuel conversion technology (Feasibility study project on liquid fuel conversion); 1996 nendo ekitai nenryo tenkan gijutsu kaihatsu seika hokokusho. Ekitai nenryo tenkan kanosei chosa nado jigyo

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

This article comprises Part 1 on 'surveys of gas fields fit for a new methanol manufacturing process' and Part 2 'reports on overseas surveys of gas fields fit for a new methanol manufacturing process.' In Part 1, surveys are conducted on the existence, exploitation, and the actual utilization of natural gas resources, and on the status of natural gas industry related infrastructures in the Middle East. Proved natural gas reserves in Iran were 742tcf (trillion cubic feet) as of 1996-end, which was the largest in the world next to Russia. As for Kuwaiti natural gas resources, they all accompany oil production, with the proved reserves marking 52.4tcf as of 1996-end or the smallest in the Middle East. In Egypt, there were proved reserves of 20.4tcf as of 1996-end, and further existence of 30-40tcf is predicted. Proved reserves in Yemen are approximately 15tcf. Proved reserves in Oman were 30tcf as of 1996-end. It is expected that there will be a 1.4% increase in the demand for methanol for automobiles. The annual demand for methanol for power generation is 720,000 tons. In Part 2, on-site surveys of infrastructures and the like indispensable for methanol plant installation are reported. (NEDO)

Fiscal 1996 achievement report. Development of liquid fuel conversion technology (Feasibility study project on liquid fuel conversion); 1996 nendo ekitai nenryo tenkan gijutsu kaihatsu seika hokokusho. Ekitai nenryo tenkan kanosei chosa nado jigyo

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

This article comprises Part 1 on 'surveys of gas fields fit for a new methanol manufacturing process' and Part 2 'reports on overseas surveys of gas fields fit for a new methanol manufacturing process.' In Part 1, surveys are conducted on the existence, exploitation, and the actual utilization of natural gas resources, and on the status of natural gas industry related infrastructures in the Middle East. Proved natural gas reserves in Iran were 742tcf (trillion cubic feet) as of 1996-end, which was the largest in the world next to Russia. As for Kuwaiti natural gas resources, they all accompany oil production, with the proved reserves marking 52.4tcf as of 1996-end or the smallest in the Middle East. In Egypt, there were proved reserves of 20.4tcf as of 1996-end, and further existence of 30-40tcf is predicted. Proved reserves in Yemen are approximately 15tcf. Proved reserves in Oman were 30tcf as of 1996-end. It is expected that there will be a 1.4% increase in the demand for methanol for automobiles. The annual demand for methanol for power generation is 720,000 tons. In Part 2, on-site surveys of infrastructures and the like indispensable for methanol plant installation are reported. (NEDO)

LA ADOPCIÓN DEL E-GOBIERNO EN ENTORNOS VOLUNTARIOS

Directory of Open Access Journals (Sweden)

Medina Molina, Cayetano

2013-01-01

Full Text Available El desarrollo del e-Gobierno centrado en el usuario requiere conocer tanto las expectativas que este tiene respecto a su uso, como los elementos que favorecen su adopción. Chan et al. (2010 han planteado la existencia de diversos antecedentes de los componentes del modelo Unified Theory of Acceptance and Use of Technology (UTAUT en un entorno obligatorio. El presente trabajo, a través del desarrollo de un modelo de ecuaciones estructurales mediante PLS, analiza la vigencia de tales antecedentes en un entorno voluntario. Los resultados muestran cómo las expectativas de resultado y las expectativas de esfuerzo inciden de forma significativa sobre la intención de emplear la plataforma de e-Gobierno, y también que esta y las condiciones facilitadoras influyen sobre el uso de la mencionada plataforma. Respecto a los antecedentes de los componentes del modelo UTAUT, cabe destacar el papel desempe˜nado por la conveniencia, asistencia, confianza y aversión a la interacción personal.

Attainment of MDGs through tourism in the Central African sub-region: Implications for local economic development in Cameroon

Directory of Open Access Journals (Sweden)

Albert N. Kimbu

2012-01-01

Full Text Available Este artículo examina el papel y la contribución del turismo al desarrollo económico local y en persecución de los Objetivos de Desarrollo del Milenio uno y siete referentes a la mitigación de la probreza extrama y la sostenibilidad ambiental en la biodiversa región de Africa Central. Los conceptos de desarrollo sostenible del turismo y desarrollo económico local (en le África subsahariana son exami-nados. A través de observaciones de campo y entrevistas semi-estructuradas con 21 partes interesadas de la industria turística de Camerún, se lleva a cabo un análisis del papel y del futuro del turismo en el desarrollo económico local y del logro de los Objetivos de Desarrollo del Milenio 1 y 7. Los actuales desafíos que inhiben el desarrollo turístico limitando su contribución al desarrollo económico y local son identificados y un marco dentro del cual el turismo puede contribuir es propuesto.

Fiscal 1999 report on results. Development item, 'development of evaluation technique for biocompatibility and the like of porous materials'; 1999 nendo takozairyo no seitai tekigosei nado hyoka gijutsu no kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

With the purpose of establishing fundamental technologies for ceramic porous materials that are excellent for artificial bone for a living body, evaluation technologies were developed for mechanical properties and biocompatibility, with fiscal 1999 results compiled. Performed for the examination of the mechanical properties were flexural test, compression test, tensile test, shearing test, torsion test, fatigue test, etc., with an evaluation testing method studied assuming that ceramic porous materials were applicable to implanting members. In the evaluation of biocompatibility, five kinds of osteoblast-like cell lines were cultured on a plastic disk and a dense hydroxyapatite disk, with adhesion and proliferation of the cells compared. Since these osteoblast-like cell lines adhere and proliferate on the surface and in the pore of hydroxyapatite, evaluation of the biocompatibility such as cell affinity was found possible with this in vitro method. With the view of obtaining principles for designing new bioactive ceramics, a method was developed for evaluating apatite-forming abilities of metal oxide gels having different compositions and structures in simulated body fluid. (NEDO)

FY 1998 report on the verification survey of geothermal exploration technology, etc. 1/2. Survey of deep geothermal resource; 1998 nendo chinetsu tansa gijutsu nado kensho chosa hokokusho. 1/2. Shinbu chinetsu shigen chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-12-01

For the purpose of commercializing deep geothermal resource, a deep exploration well of 4000m class was drilled in the existing geothermal development area to survey the situation of deep geothermal resource existence and the availability. Concretely, the deep geothermal exploration well was drilled for study in the Kakkonda area, Shizukuishi town, Iwate prefecture, to clarify the situation of deep geothermal resource existence and the whole image of geothermal system. Consideration was made of the deep geothermal exploration method, systematization of deep high temperature drilling technology, and availability of deep geothermal resource. The results of the survey were summed up as follows: 1) general remarks; 2) deep exploration well drilling work; 3) details of the study. 1) and 2) were included in this report, and 3) in the next report. In 1), the items were as follows: the study plan/gist of study execution, the details and results of the deep geothermal resource survey, the outline of the deep exploration well drilling work, and the outline of the results of the FY 1998 study. In 2), the drilling work plan/the actual results of the drilling work were summed up. As to the results of the study, summarized were the acquisition of survey data on deep exploration well, heightening of accuracy of the deep geothermal resource exploration method, etc. (NEDO)

Fiscal 1996 verification and survey of geothermal prospecting technology etc. 1/2. Survey report on deep-seated geothermal resources; 1996 nendo chinetsu tansa gijutsu nado kensho chosa hokokusho. 1/2. Shinbu chinetsu shigen chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

For the purpose of reducing the risk to accompany the exploitation of deep-seated geothermal resources, investigations are conducted into the three factors that govern the formation of geothermal resources at deep levels, that is, the supply of heat from heat sources, the supply of geothermal fluids, and the development of fracture systems contributing to the constitution of reservoir structures. In fiscal 1996, the deep-seated exploration well WD-1a is sidetracked for penetration for a target newly assigned at the 3,000m-deep level. Carried out in a survey of well geology are the naked-eye and microscopic observation of core cuttings, X-ray powder method, examination of inclusions in fluids, chemical analysis of whole rocks, analysis of isotopes in minerals, analysis of core fracturing, etc. Also, data are collected from a survey of mud log, survey of water in the well before digging, and from well logging. Furthermore, pressure monitoring etc. are conducted in order to determine the interference in pressure between the deep-seated and shallow-seated wells that accompanies multiple outbursts from the Kakkonda No. 2 machine, to know the water permeability between the shallow-seated and deep-seated parts, and to grasp the anisotropy in permeability in shallow-seated reservoirs. (NEDO)

Fiscal 1997 verification and survey of geothermal prospecting technology etc. 2/2. Survey report on deep-seated geothermal resources; 1997 nendo chinetsu tansa gijutsu nado kensho chosa hokokusho. 2/2. Shinbu chinetsu shigen chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-02-01

For the purpose of reducing the risk to accompany the exploitation of deep-seated geothermal resources, investigations are conducted into the three factors that govern the formation of geothermal resources at deep levels, that is, the supply of heat from heat sources, the supply of geothermal fluids, and the development of fracture systems contributing to the constitution of reservoir structures. In the evaluation and study of reservoirs and the amount of resources, a reservoir simulation is conducted to grasp the characteristics of reservoirs and the amount of resources. For this purpose, the origin and history of the Kakkonda geothermal field are studied, with special attention paid to the origin of the difference in temperature between the shallow-seated and deep-seated reservoirs, the geometry of granite at Kakkonda, the region of recharge of meteoric water, the distribution of saline concentration in the natural state and the cause of the occurrence, the amount of supply of fluids and heat from the depth to the reservoirs, etc. In the evaluation and study of the economic effectiveness of the exploitation of deep-seated geothermal resources, it is learned that, if a 50MW geothermal power station is to be built at a deep level (drilled depth of 3000m on the average) with a rate of 50% attained in drilling, the steam amount required at such a deep level (presumed to be 75t/h) will be more than twice that required at a shallow level (presumed to be 35/h). (NEDO)

Fiscal 1997 verification and survey of geothermal prospecting technology etc. 1/2. Survey report on deep-seated geothermal resources; 1997 nendo chinetsu tansa gijutsu nado kensho chosa hokokusho. 1/2. Shinbu chinetsu shigen chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-02-01

For the purpose of reducing the risk to accompany the exploitation of deep-seated geothermal resources, investigations are conducted into the three factors that govern the formation of geothermal resources at deep levels, that is, the supply of heat from heat sources, the supply of geothermal fluids, and the development of fracture systems contributing to the constitution of reservoir structures. In fiscal 1997, a fumarolic gas test is conducted at the deep-seated geothermal well WD-1b which was drilled in the preceding fiscal year. In the test, chemical and isotopic characteristics are compared between the fluids of the WD-1b and the other existing deep-seated wells, and it is found that the fluids from the WD1b originates in surface water just like the fluids from the others and that the constitution of its gas is not greatly affected by magmatic fluids. A PTS (Pressure, Temperature, Spinner flowmeter) logging is performed to observe conditions in the well with the fluids being discharged and to know the inflow point and rate the fumarolic fluids, and the result is utilized to presume the 3-dimensional stress in the vicinity of the WD-1. An isotopic measurement of water included in the fluids is conducted to examine the origin of the geothermal fluids, constant observation and analysis of micro-earthquakes are carried out, and the fluid flow and fluid hydraulic characteristics are also studied. (NEDO)

FY 1998 report on the verification survey of geothermal exploration technology, etc. 2/2. Survey of deep geothermal resource; 1998 nendo chinetsu tansa gijutsu nado kensho chosa hokokusho. 2/2. Shinbu chinetsu shigen chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-12-01

For the purpose of commercializing deep geothermal resource, a deep exploration well of 4000m class was drilled in the existing geothermal development area to survey the situation of deep geothermal resource existence and the availability. Concretely, the deep geothermal exploration well was drilled for study in the Kakkonda area, Shizukuishi town, Iwate prefecture, to clarify the situation of deep geothermal resource existence and the whole image of geothermal system. Consideration was made of the deep geothermal exploration method, systematization of deep high temperature drilling technology, and availability of deep geothermal resource. The results of the survey were summed up as follows: 1) general remarks; 2) deep exploration well drilling work; 3) details of the study. This report contained 3). In 3), the items were as follows: heightening of accuracy of the deep geothermal resource exploration method, making of a geothermal model in the Kakkonda area, study of deep drilling technology, study of deep fluid utilization technology, and making of a guide for deep geothermal resource exploration/development in the Kakkonda area. As to the technology of high temperature deep geothermal well drilling, studies were made of the borehole cooling method, mud water cooling method, survey of deterioration of casing with age, etc. (NEDO)

Fiscal 1999 achievement report. Research and technology of important regional technologies (Development of combustion control system technology for rationalizing energy use); 1999 nendo energy shiyo gorika nensho nado seigyo system gijutsu kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

For upgrading and optimizing combustion control systems, research and development is conducted for materializing SiC devices capable of high-temperature operation. In the development of basic technologies common to various types of SiC semiconductor devices, XeCl excimer laser annealing is applied to SiC implanted with Al ions, and low-damage ion implantation is studied. In the development of techniques for forming SiC single crystals into substrates, warpage of 20{mu} or less, surface coarseness of 5{mu}m or less, etc., are achieved in 1-inch and 2-inch wafers. In the development of SiC sensor technology, techniques of heteroepitaxial growth of 3C-SiC on Si substrates and of 6H-SiC on 6H-SiC wafers are established and an optical sensor is built experimentally. A high-temperature UV sensor, switching device for control, rectification device for control, etc., are built of nitrogen ion implanted 6H-SiC. In the effort to develop combustion control system technology, the principle of system operation of the combustion control method proposed under this project is verified. (NEDO)

Fiscal 1996 verification and survey of geothermal prospecting technology etc. 2/2. Survey report on deep-seated geothermal resources; 1996 nendo chinetsu tansa gijutsu nado kensho chosa hokokusho. 2/2. Shinbu chinetsu shigen chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

For the purpose of reducing the risk to accompany the exploitation of deep-seated geothermal resources, investigations are conducted into the three factors that govern the formation of geothermal resources at deep levels, that is, the supply of heat from heat sources, the supply of geothermal fluids, and the development of fracture systems contributing to the constitution of reservoir structures. In the study of deep-seated geothermal models for the Kakkonda area, a reservoir structure model, a thermal structure model, and a geothermal fluid/hydraulic structure model are deliberated. Then, after studying the relations of the said three structure models to fracture systems, the boundary between the geothermal fluid convection region and the thermal conduction region near the 3,100m-deep level, the existence of high-salinity fluids and the depth of gas inflow, the ranges of shallow-seated reservoirs and deep-seated reservoirs, the trend of reduction in reservoir pressure and the anisotropy in water permeability in shallow-seated reservoirs, etc., a latest reservoir model is constructed into which all the findings obtained so far are incorporated. As for guidelines for deep-seated thermal resources survey and development, it is so decided that deep-seated geothermal survey guidelines, deep-seated fluid production guidelines, and deep-seated well drilling guidelines be prepared and that assessment be made of their economic effectiveness. (NEDO)

Fiscal 1998 overseas geological structure survey report on the engineer interchange project (coal mine technology field), Indonesia; 1998 nendo kaigai chishitsu kozo nado chosa gijutsusha koryu jigyo (tanko gijutsu bun'ya), Indonesia hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

This project aims at improvement of coal mining technology and productivity in Indonesia by Japanese production control technology and business management technology for underground coal mining, through interchange of coal engineers between Japan and Indonesia. This project is composed of the short- term and long-term dispatch project of engineers to Indonesia, and the training project of Indonesian engineers in Japan. In fiscal 1998, the short-term dispatch was made for the training in Indonesia on underground coal mine development (development planning, pit mouth selection, main gallery design, mining system selection, transport planning, ventilation planning, under-river mining, mine water proofing, drainage). The long-term dispatch was made for contact and negotiation with concerned Indonesian organizations, support of the training project, and collection of information on the trend of Indonesian economy and energy, and the present and trend of the coal industry for conducting smooth and effective engineer interchange. (NEDO)

Research and development of utilization technology of solar thermal system for industrial and other use. Research and development of solar system (research for solar/energy-conservation technology retrofitted to existing buildings); Sangyoyo nado solar system jitsuyoka gijutsu kaihatsu. Solar system no chosa kenkyu (solar toshi muke gijutsu ni kansuru chosa)

Energy Technology Data Exchange (ETDEWEB)

Takita, M [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

1994-12-01

Described herein are the results of the FY1994 research program for solar/energy-conversion technologies retrofitted to existing buildings. The estimated effects and economic viability of retrofitting technologies show that they bring very high energy-saving effects when applied to heating and hot water supply, which consume a large portion of energy, but relatively low energy-saving effects when applied to cooling, solar walls, glazed balconies and transparent insulators. The study on applicability of these technologies in Japan indicates that the technologies which can recover cost within an average life time are those applied to windows, solar collector systems for hot water supply and heating, and transparent insulators. Although these technologies are low in applicability to cooling viewed from the angle of cost recovery, retrofitted radiation type cooling systems improve not only cooling and energy-saving effects but also comfortableness.

Fiscal 1997 industrial technology R and D project. Research report on development of use technology of bio- resources such as complex biosystem (Development of use and production technologies of complex biosystems); 1997 nendo fukugo seibutsukei nado seibutsu shigen riyo gijutsu kaihatsu seika hokokusho. Fukugo seibutsukei riyo seisan gijutsu no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

This project aims to establish production technology of functional substances, oil degradation and purification technology, and use technology of unused oil fraction through development of cultivation control technology of complex biosystems. For functional material production technology, as functional substances some specific marine bacteria inhibitors, antibreeding substances of microalgae, and UV absorption substances were isolated. The productivity of korormicin as specific inhibitor against marine bacteria was improved considerably by cultivation method. For research on molecular genetic analysis technology, a new identification technology and a simple automatic analysis system of microeucaryotes using genes were developed. For global environment purification technology such as efficient degradation of pollutants, study was made on cultivation control technology of phenol- degrading consortia, population dynamics of oil-degrading microbial consortia and a restoration method of oil pollution by complex biosystem at lower temperature, and the demonstration experiment of oil degradation were carried out. (NEDO)

FY 1998 report on the verification survey of geothermal survey technology, etc./Development of the reservoir fluctuation survey method (Summary). Theme 5-1. Technology to predict reservoir fluctuations; 1998 nendo chinetsu tansa gijutsu nado kensho chosa choryuso hendo tanhsaho kaihatsu hokokusho (yoyaku ). 5-1. Choryuso hendo (choryuso hendo yooku gijutsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

The existing gravity post processor was improved and a feasibility study of downhole gravity profile measurement was conducted. As compared with the earth surface, great fluctuations could be observed in the downhole, indicating a possibility of acquiring the useful information on underground steam zones. The existing self-potential post processor was improved, which made the history matching analysis easy. A geochemical post processor was developed which can analyze geochemical fluctuations. Changes in resistivity in reservoir associated with production/injection of geothermal fluids were calculated, and a feasibility was shown of developing the resistivity post processor into which the existing MT forward calculation method was efficiently integrated. From the data on effects of changes in temperature/fluid phase on seismic wave velocity and damping, usability of the seismic wave post processor was made clear. From the reservoir fluctuation analysis using gravity/self-potential post processor, it was found out that gravity fluctuations at Onikobe had already finished and presently there are less fluctuations. Self-potential is still in fluctuations and becomes indices of reservoir fluctuations. Study was made also on Sumikawa where steam is dominant. (NEDO)

Fiscal 1999 survey report. Survey of long-term strategy for energy technology: Volume 1 (Survey of foundation for strategy formulation for industrial technologies - strategy for environmental foundation buildup); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. 1. Sangyo gijutsu senryaku sakutei kiban chosa (kankyo kiban seibi senryaku)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Japan has to prepare itself to behave accurately, and to stay technologically competitive, in the severe competition age to come in which it will fail to find leaders to follow. To fulfill this goal, Japan has to collect sufficient information and analyze it relative to the current state and future prospect of industrial technologies in Japan and overseas and various factors that will influence them, and to develop industrial technology related policies based firmly on scientific and theoretical foundations to be established using the thus-acquired knowledge. Under the circumstances, a survey is conducted of innovative, technological foundations, such as industrial technology related efforts in and out of Japan. The report consists of two volumes that cover what are described below. For the survey of technology related policies pursued in various countries abroad, literature and the like are investigated concerning technology related measures, budgets, and decision making processes in America, Britain, Germany, France, and the European Union, and the results are compiled so that their systems may be compared with each other. In the survey of Japan's technology related innovative systems, case studies are made about commodities over which Japan is relatively high in competitive power. Specifically, commodities manufactured by Japan's businesses and occupying 75% or more of the global share are investigated. (NEDO)

Fiscal 1999 survey report. Survey of long-term strategy for energy technology: Volume 1 (Survey of foundation for strategy formulation for industrial technologies - strategy for environmental foundation buildup); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. 1. Sangyo gijutsu senryaku sakutei kiban chosa (kankyo kiban seibi senryaku)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Japan has to prepare itself to behave accurately, and to stay technologically competitive, in the severe competition age to come in which it will fail to find leaders to follow. To fulfill this goal, Japan has to collect sufficient information and analyze it relative to the current state and future prospect of industrial technologies in Japan and overseas and various factors that will influence them, and to develop industrial technology related policies based firmly on scientific and theoretical foundations to be established using the thus-acquired knowledge. Under the circumstances, a survey is conducted of innovative, technological foundations, such as industrial technology related efforts in and out of Japan. The report consists of two volumes that cover what are described below. For the survey of technology related policies pursued in various countries abroad, literature and the like are investigated concerning technology related measures, budgets, and decision making processes in America, Britain, Germany, France, and the European Union, and the results are compiled so that their systems may be compared with each other. In the survey of Japan's technology related innovative systems, case studies are made about commodities over which Japan is relatively high in competitive power. Specifically, commodities manufactured by Japan's businesses and occupying 75% or more of the global share are investigated. (NEDO)

Achievement report for fiscal 1997 on the development of technologies for utilizing biological resources such as complex biosystems. Development of technologies for producing substitute fuel for petroleum by utilizing organisms; 1997 nendo fukugo seibutsukei nado seibutsu shigen riyo gijutsu kaihatsu seika hokokusho. Seibutsu riyo sekiyu daitai nenryo seizo gijutsu no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Technologies of producing useful substances using the substance decomposing/producing functions of complex biosystems and methods of their handling are developed. In the utilization of microbes in the digestive tracts of termites and longicorns, it is made clear that several kinds of termites cleave the {beta}-O-4 ether linkage. In relation to technologies for wood decomposing complex microbial system construction and complex vector system development, a screening system is constructed in which strains that exhibit complex actions are combined. Concerning the advanced utilization of tropical oil plants, conditions are determined for inducing callus out of oil palm tissues. Out of oil palm sarcocarp tissues, mRNA (messenger ribonucleic acid) is isolated for the construction of a cDNA (complementary deoxyribonucleic acid) library. For the purpose of isolating a powerful promoter, a partial base sequence is determined for ubiquitin that frequently expresses itself in cells. A pathogenic bacterium ailing the oil palm is sampled for identification, and it is inferred that the bacterium is a kind of Ganoderma boninense. (NEDO)

FY 1998 report on the results of the development of the utilization technology of biological resources such as bioconsortia. Development of the petroleum substituting fuel production technology using biology; 1998 nendo fukugo seibutsukei nado seibutsu shigen riyo gijutsu kaihatsu seika hokokusho. Seibutsu riyo sekiyu daitai nenryo seizo gijutsu no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

For the purpose of establishing the analysis technology and industrial utilization technology required for the establishment of the utilization technology of consortia's high functions which are already used in the fermentation technology field over the limit of the conventional bio-technology using functions of single biological species, study was made. As a part of the study, the establishment was aimed at of the high-grade utilization technology of seaweed/algae using the degradation/conversion functions of the consortium base and the useful substance production technology by interaction of the consortium base of organism and flora/fauna. Studies for the establishment of the technology were made in the following two fields: technology to use unused resources such as lignocellulose and technology to produce petroleum substituting useful resources. As to the technology to use unused resources, the establishment was proceeded with of the technology to degrade/convert the seaweed-origin acidic polysaccharide into the useful substance using the consortium system. In FY 1998, in search of the excellent microorganism consortia which can degrade/solubilize carageenan, samples were picked up from the underwater of the Republic of Palau and incubated in the flat culture medium. Thirty-eight kinds of the degraded bacterium group were acquired. Using the degraded bacterium group, {kappa}-carrageenan was degraded and analyzed of the products. (NEDO)

Fiscal 1996 global environmental industry technology research related project. Report on the results of the consignment project of research and development of technology for reducing carbon dioxide emissions; 1996 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu kanren jigyo. Nisanka tanso nado haishutsu teigen gijutsu kenkyu kaihatsu itaku gyomu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

For the purpose of reducing emissions of carbon dioxide, freon, etc., a research project was carried out of `Research and development of technology for reducing carbon dioxide emissions` which consists of 8 projects. The paper reported the results of the projects. The projects are: (1) Development of waste water treatment of submerged combustion system, (2) Development of thermoelectric generating devices, (3) Development of high performance heat insulation materials, (4) Development of methanol reformer for transportable fuel cell, (5) Development of large pressure reducing valves, (6) Development of large-scale turbo heat pump for district heating and cooling plants, (7) Development of heat pumps for transportation equipment, and (8) Development of thermoelectric cooling devices. In (1), the waste water treatment test was conducted and reached the target. In (2), the thermoelectric device using powder sintering element obtained performance twice the performance level of the existing device. In (3), (4), (5) and (6), the target was all reached. In (7), the results well agreed in a comparison between structural analysis and experiment. The cooling unit by the SPS sintering method using Bi-Te system sintered material element obtained the cooling efficiency almost the same as that by the freon compressor method. 8 refs., 161 figs., 63 tabs.

FY 1998 report on the results of the development of the utilization technology of biological resources such as bioconsortia. Development of the petroleum substituting fuel production technology using biology; 1998 nendo fukugo seibutsukei nado seibutsu shigen riyo gijutsu kaihatsu seika hokokusho. Seibutsu riyo sekiyu daitai nenryo seizo gijutsu no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

For the purpose of establishing the analysis technology and industrial utilization technology required for the establishment of the utilization technology of consortia's high functions which are already used in the fermentation technology field over the limit of the conventional bio-technology using functions of single biological species, study was made. As a part of the study, the establishment was aimed at of the high-grade utilization technology of seaweed/algae using the degradation/conversion functions of the consortium base and the useful substance production technology by interaction of the consortium base of organism and flora/fauna. Studies for the establishment of the technology were made in the following two fields: technology to use unused resources such as lignocellulose and technology to produce petroleum substituting useful resources. As to the technology to use unused resources, the establishment was proceeded with of the technology to degrade/convert the seaweed-origin acidic polysaccharide into the useful substance using the consortium system. In FY 1998, in search of the excellent microorganism consortia which can degrade/solubilize carageenan, samples were picked up from the underwater of the Republic of Palau and incubated in the flat culture medium. Thirty-eight kinds of the degraded bacterium group were acquired. Using the degraded bacterium group, {kappa}-carrageenan was degraded and analyzed of the products. (NEDO)

Achievement report in fiscal 2000 on technological development to recycle waste building materials and glasses. Development of waste building material recycling technology (Research and development of recycling technology corresponding to grades of demolished building lumbers); 2000 nendo kenchiku haizai glass nado recycle gijutsu kaihatsu seika hokokusho. Kenchiku haizai recycle gijutsu kaihatsu (kenchiku kaitai mokuzai no hin'i ni taioshita recycle gijutsu no kenkyu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

With an objective to reduce wastes, and promote effective utilization of wood resources, research and development has been made on a demolished building material recycling technology. This paper summarizes the achievements in fiscal 2000. In developing the technology to manufacture high water resistant wood boards, discussions were given on resor type phenolic resin as an adhesive, and on the medium density fiberboard (MDF) being a substitute material for plywood as the wooden board. As a result, a highly water resistant MDF that can clear JIS E0 has been developed. In the research of a technology to enhance durability of wooden boards, the in-liquid roll press method was devised to perform impregnation of chemicals into board raw materials continually and simply, whose device was fabricated on a trial basis. With regard to recycling of medium to low grade wood-based wastes, researches were performed on pulverization of the wastes, fabrication of liquefied woods, and effective utilization of the liquefied woods. Both of a hammer mill and a chip saw crusher fabricated wood powder with nearly uniform grain size regardless of types of the wood-based wastes. Liquefaction of plywood and PB boards required more stringent reaction conditions than liquefaction of such ordinary members as pillar materials and laminated lumbers. (NEDO)

FY 2000 report on the survey of long-term energy technology strategy, etc. - Fundamental survey to work out the industrial technology strategy. Research survey on analysis of trends of technical innovation in Japan/Europe/the U.S.; 2000 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiso chosa (Nichibeio no gijutsu kakushin doko no bunseki ni kansuru chosa kenkyu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For survey of the industrial competitive force, it is important to arrange the environment where the continuous and spontaneous technical innovation is generated. To recognize the present situation, the patent information relating to technical innovation, etc. were collected, indices of the number of patent, degree of the reference and scientific link in Japan, the U.S., and Europe were taken out by technology field to analyze the patent trend in the past 10 years. By technology field, the U.S. is superior in a lot of fields. Japan is at top rank in office supplies and camera fields, made strenuous efforts in automobile and semiconductor/electronic fields, but is behind others in medicine, biotechnology and aerospace fields. Concerning the number of patent registration in the U.S., Japan is superior to the U.S. in automobile/electric equipment/metal industries. Europe is superior in food and engineering fields. The U.S. is superior in aerospace industry and biotechnology fields. The U.S. is featured by a large number of patent applications by universities and government organizations. (NEDO)

Fiscal 1996 report on the results of the R and D under a consignment from NEDO of the technology to fix and effectively use carbon dioxide using bacteria and microalgae (for public); 1996 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku (saikin sorui nado riyo nisanka tanso koteika yuko riyo gijutsu kenkyu kaihatsu seika hokokusho (kokaiyo))

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

For the purpose of contributing to the solution to the global environmental problem, a technology is developed in which by searching for/breeding/developing bacteria, etc. which conduct photosynthesis highly effectively, CO2 is fixed and recycled. The fiscal 1996 R and D is outlined as the utilization of bacteria, microalgae, etc. Obtained were microalgae exceeding the conventional strains in CO2 fixation ability, and bacteria/microalgae excellent in production of polysaccharides, hydrocarbon, lipid, biological active substances, etc. The fundamental study was continued of CO2 integrated enzyme function/reaction system as molecular biological breeding. In the cell fusion, a set-up of conditions for green algae was started. For the confirmation of performance of high dense/quantity culture technology using solar light, further improvement of performance and systematization, 200L scale testing equipment was manufactured. It is a collective reactor and enabled study of ventilation/agitation and control of light strength. A reactor analysis model was constructed. Also including the conversion into useful substances, energy/material balance was systematically studied. Collection of technical literature and information exchanges were made in Japan and overseas. 276 refs., 475 figs., 156 tabs.

Prospect of mechanical engineering. Report from MIT; Kikai kogaku no atarashii tenkai. MIT kara no hokoku

Energy Technology Data Exchange (ETDEWEB)

Asada, H [Massachusetts Inst. of Technology, Cambridge, MA (United States)

1996-01-05

The author of this article is a professor of Department of Mechanical Engineering of Massachusetts Institute of Technology (MIT) and the director general of Laboratory for Information Systems and Technology of the institute. At Department of Mechanical Engineering of Engineering Faculty of world-famous MIT, Laboratory for Information Systems and Technology was established in 1994 and in the same year, the curricula of the department were greatly revised after 30 years for its enforcement from the new semester starting from September, 1995. These two occasions are suggestive for guessing the future of mechanical engineering, hence its aim and meaning are introduced. Department of Mechanical Engineering aims to bring up system integrators who can consolidate systems based on wide-ranged knowledge, and its basic subjects are divided into 4 subjects namely dynamics and control, heat and fluid, system engineering and control, and design and production, and it has been decided that each of them is taught in equal weight and in parallel. Also as a new study field in the above Department of Mechanical Engineering, nanotechnology and artificial intelligence, and high-technological aircraft and networks are shown as examples.

Annual review on mechanical engineering. 14. ; Roboticster dot mechatronics. Kikai kogaku nenkan. 14. ; Roboticster dot mechatronics

Energy Technology Data Exchange (ETDEWEB)

Kakizaki, T. (Nippon Telegraph and Telephone Corp., Tokyo (Japan))

1990-08-05

Trend of robotics and mechatronics in 1989, Japanese and foreign, are reviewed in the respective fields. In the field of manipulation technology, development of micro-manipulation, simulation by neural network, motion control technology in space, and development of whole-arm manipulator were advanced. Studies on locomotive function of wheels. legs, and crawler types in auto-locomotive robots were progressed. On sensor technology, combined technologies with control engineering and sensor information were noteworthy. In the field of mechatronics, attention were paid to animated experimental modeling of to new actuators and new trials for system technologies. For the later example, introduction of higher control to magnetic bearings, acceleration in intelligent AV appliances, and automatic connection of MDF in communication field were noteworthy. Systems applying optical technologies increased extremely. Moreover, many other items of research and development are introduced. 40 refs.

Report on achievements in fiscal 1999 of New Sunshine Project. Development of superconductor power applied technologies. Research on total system; 1999 nendo chodendo denryoku oyo gijutsu kaihatsu gyomu seika hokokusho. Total system nado no kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

To deal effectively with problems being actualized in electric power systems, it is necessary to introduce superconductor technologies into power devices, and achieve higher efficiency, density and stability in the power systems. To achieve the goal, development is being made on superconductor power applied technologies, whereas investigative researches are given on the effects of introducing the superconductor power applied devices to proceed the development effectively and smoothly. This project is also given evaluations on its research achievements. In the practical application of superconductor generators, all of the verification tests have been completed, with the model generator system linkage test as the final test. Design and fabrication technologies were established on a 200,000-kW class pilot generator after having gone through analyses made after the tests. Not only having achieved the initial technical value targets, the result presented reliability required for practical use of the superconductor generator, having exceeded the expectation. The research and development of the superconductor generator technologies under this project is concluded successful. The AC superconductor devices were developed by effectively utilizing the results of the leading researches on fundamental technologies for AC superconductor power device technologies as well as other results of the world's highest levels. (NEDO)

Report on fundamental surveys for such as cases and effects in relation with development of new energy technologies in fiscal 1999; 1999 nendo shin energy gijutsu kaihatsu ni kakawaru jirei koka nado kiso chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This paper describes the fundamental surveys in fiscal 1999 on cases and effects in relation with development of new energy technologies. Among the projects having been performed by NEDO in commemoration of the 20th anniversary of the NEDO foundation, the economic and social situations in the times in which the projects have been carried out with the focus placed particularly on new energies were put into order and analyzed to make clear the positioning of the project significance in the nation's energy policies. In addition, the roles of NEDO were recognized afresh to use them as the fundamental materials to serve for the future policy development. For the past thirty years before and after the oil crises, the time division that can be used universally for the project evaluation was established, based on the trends inside and outside the country, social currents, related indexes, and the status of development execution. Work hypotheses were presented regarding the basic conception in the evaluation, specific evaluation viewpoints, and their contents. Based on the hypotheses, three subjects were taken up as representative cases, that is, photovoltaic power generation, coal liquefaction, and phosphoric acid type fuel cell technology development. Time points that are considered as the important turning points were specified to give evaluations at respective turning points. Analyses were also made on decision making factors for project planning, continuation, direction change, suspension, and completion. (NEDO)

Fiscal 1997 Project related to research and development of global environment industrial technologies. Report on the results of works commissioned for research and development of technology for reducing carbon dioxide emissions; 1997 nendo chikyu kankyo sangyo gijutsu kenkyu kaihatsu kanren jigyo. Nisanka tanso nado haishutsu teigen gijutsu kenkyu kaihatsu itaku gyomu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

With an objective of achieving reduction in emission of carbon dioxide and fluorocarbons, the `research and development on technologies to reduce emission of carbon dioxide and other substances` consisting of eight projects were conducted. In research and development of waste water treatment technologies using submerged combustion, studies were performed on removal by combustion of such pollutants as organic compounds, nitrogen compounds, and sulfur compounds. The development targets were achieved on each item. In research and development related with thermal electric power generation elements, semiconductor single crystals were fabricated in order to acquire technical knowledge on thermal power generation elements intended of utilizing industrial waste heat, whereas a simulation technology for designing was developed. In other projects, research and development works were carried out on high-performance heat insulating materials, and a movable methanol reformer for fuel cells. Developments were conducted on a large pressure reducing valve, and a cooling and heating turbo heat pump for regional air conditioning facilities. Research and development were made on Peltier elements, all efforts having achieved results respectively. 134 figs., 65 tabs.

Report on New Sunshine Program-supported undertakings for fiscal 1995. Development of hot water power plant and deep-seated geothermal resources sampling/exploiting technologies; 1995 nendo New Sunshine keikaku hojo jigyo seika hokokusho. Nessui riyo hatsuden plant nado kaihatsu (shinbu chinetsu shigen saishu gijutsu no kaihatsu, shinbu chinetsu shigen seisan gijutsu no kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

Reported are the results of researches conducted in fiscal 1995. For the formulation of a general development design, data are collected about domestic high-temperature thermal wells through questionnaires and literature probing, and are scrutinized. As for the development of logging technology, a memory type PT (Pressure, Temperature) logger is experimentally constructed, and is found to properly operate in an environment of up to 350degC in a production well. An experimentally manufactured S-probe proves to be capable of heat insulation and sealing. In the field of PT monitoring, a high-temperature optical fiber is experimentally fabricated for study, capable of measuring temperatures up to 400degC. As for the development of high-temperature tracer monitoring technology, basic experiments are conducted about the thermal characteristics of aromatic acids, and preparatory experiments about gas phase tracers. In the study of scale monitoring technology, deep-seated fluids are collected and analyzed. In the field of production control, technical problems are discussed and information is gathered centering on methods for scale prevention and removal. 31 refs., 90 figs., 40 tabs.

Report on New Sunshine Program-supported undertakings for fiscal 1997. Development of hot water power plant and deep-seated geothermal resources sampling/exploiting technologies; 1997 nendo New Sunshine keikaku hojo jigyo seika hokokusho. Nessui riyo hatsuden plant nado kaihatsu, shinbu chinetsu shigen saishu gijutsu no kaihatsu, shinbu chinetsu shigen seisan gijutsu no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Reported are the results of researches conducted in fiscal 1997. In the field of PTSD (Pressure, Temperature, Spinner flowmeter, fluid Density) well logging, the high-temperature performance of a memory type PT (Pressure, Temperature) well logger is confirmed in a demonstration test. As for the S-probe, modification is effected for the reduction of the outside diameter from 70mm to 56mm, and tests are conducted in real wells. As for the D-probe, a laboratory test is conducted and then the probe behaves as predicted. In the field of PCT (Pressure, Chemical, Temperature) monitoring, the sampler is subjected to an on-site test in Italy, when water is successfully sampled out of the well. In the field of scale monitoring technique, deep-seated fluid is collected and examined, and the scale deposition rate in the deep-seated fluid is determine. For the study of production control technology with respect to scale prevention and removal, an Mg-Si scale synthesis test is conducted in the temperature range of 100-300degC, and it is found that the solubility of scale decreases with a rise in temperature. 19 refs., 93 figs., 24 tabs.

Fiscal 2000 survey report. Survey of long-term energy technology strategy and the like (Research on actualities of Japanese industries' research and development potential); 2000 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (Nippon kigyo no kenkyu kaihatsuryoku no jittai ni kansuru chosa kenkyu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For working out propositions on what the country should do and on what improvement industries should make for the strengthening of industries' competitive power on the market, analyses were conducted into the objects of research and development, organizations engaged in research and development activities, methods of evaluation, and the like. In concrete terms, studies were made on industries' roles in research and development activities and on the actualities of basic research and development potential, and then a survey was conducted through questionnaires and interviews about (1) tasks relating to corporation management and research and development potential, (2) development of research dedicated talent and its fluidity, and (3) problems feared to get worse in the future. Questionnaires were sent to 217 corporations or 577 people of whom 37.6% responded. Each item is described below. Under item (1), it is pointed out that basic research has shrunk as a whole, that pressure is on the increase urging that research directly increase profit, and that theme selection is made to match the business model. Under item (2), it is stated that post-doctorate researchers' knowledge is respected but that recruitment is another matter, and that fluidity of researchers between corporations will increase. Under item (3), it is pointed out that researchers are increasingly inferior in quality and that brain drain out of Japan is feared. (NEDO)

Report on the achievements in fiscal 1999. Technology to use gas hydrate as a resource (Research and development for exploration, research and development on drilling technologies, investigative research on an environment influence evaluation method, and investigative research on a utilization system); 1999 nendo gas hydrate shigenka gijutsu sendo kenkyu kaihatsu seika hokokusho. Tansa nado ni kansuru kenkyu kaihatsu, kussaku gijutsu nado ni kansuru kenkyu kaihatsu, kankyo eikyo hyokaho no chosa kenkyu, riyo system ni kansuru chosa kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The contents of the research and development performed in the current fiscal year are as follows: (1) research and development for exploration, (2) research and development on drilling technologies, (3) investigative research on an environment influence evaluation method, and (4) investigative research on a utilization system. In Item (1), element analysis data are used to study a method to estimate production environment of hydrate ore beds by using an inorganic ion analyzer and a trace amount element analyzer, the crust thermal flow measuring method is used to discuss a method to analyze the hydrate stability zones together with the data of sea area exploration records, and conceptual design is made on a resource potential evaluation system. In Item (2), experiments and analytical discussions are performed on decomposition control of the gas hydrate solid-liquid interface according to such conditions for the drilling fluid as temperatures and flow rates. Elucidation is given on the initial process of bubble generation for behavior of decomposed gas bubbles. Observation and elucidation are made on two-phase flow behavior of non-Newtonian fluid. In Item (3), conceptual design is carried out on a system to detect elements of shape change in each bed due to fluid movement in a gas hydrate bed and an upper bed. In Item (4), discussions are given on the optimizing conditions for generation and dissociation of gas hydrates. Investigation is made also on a possibility of the transportation and storage system. (NEDO)

Increased dialogue between NADOs and academics – challenges and possibilities

DEFF Research Database (Denmark)

Gleaves, John; Christiansen, Ask Vest

2015-01-01

More than just repositories of knowledge, academics have an obligation to also forge new paths of discovery. As the boundary between what we know and what we still do not know expands, academics are not required to ask “what applied value does this discovery have.” Galileo’s curiosity in the time...... it took a chandelier to swing, measured only by his heartbeat, was not intended to help create modern timepieces, though it did through the discovery of the tautochrone nature of a pendulum. It was simple curiosity driven by unanswered questions and the human desire to know. We should pursue truth...

Fiscal 2000 survey report on rationalization project for international energy conservation, technological dissemination project for international energy conservation, and Green Helmet Project. Japan-China alternative energy seminar/waste disposal; 2000 nendo kokusai energy shiyo gorika nado taisaku jigyo, kokusai energy shohi koritsuka nado gijutsu fukyu jigyo, green helmet jigyo chosa hokokusho. Nicchu sekiyu daitai energy seminar haikibutsu shori

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

This paper explains the Japan-China alternative energy seminar (February 28 and March 1, 2001, at Beijing). The purpose of the seminar is to introduce systematic and three-dimensional or land/sea/air measures for waste disposal including recycling in Japan, to provide guidance of measures in improving recognition and methods for waste disposal in China, and also to contribute to the dissemination and promotion of a model project for effectively utilizing waste heat from rubbish incineration, a project being implemented in Harbin City now. The activities of NEDO were introduced, with emphasis placed on a model program, called Green Aid Project, for managing heat from waste incineration. On the subjects of sustainable development, urban environment, and energy, the policy of China's tenth five-year plan was demonstrated, and the treatment of wastes in China was also explained. The present state of waste processing in Japan was introduced, as was its maintenance of the facilities. Concerning Japan's waste processing technologies and characteristics of the equipment, there were presented non-incineration processing including crushing/separating, RDF, compost, methane fermentation, etc.; incineration plants; and each of the technologies such as combustion, exhaust gas, ash treatment, use of remaining heat, and gasification melting. (NEDO)

New Sunshine Project for fiscal 1997 on the international cooperation project. Cooperation in solar energy technologies among Japan, Australia and other countries; 1997 nendo new sunshine keikaku kokusai kyoryoku jigyo. Nichigo nado taiyo energy gijutsu kyoryoku

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

This paper describes the state of progress in the cooperation in solar energy technologies among Japan, Australia and other country, the memorandum concluded for the new project, and the activity report on the NEDO/MUERI project. The progress in the cooperation in solar energy technologies among Japan, Australia and other country is divided into that of the new project and that of the continued project. The former relates to the start of the long-term endurance test project for photovoltaic solar modules in Oman. The location of the endurance test is the Sultan Qaboos University in the suburb of Muscat. Modules subjected to the endurance test consist of ten modules of five types. The test will be performed on air temperature, humidity, wind directions, insolation on horizontal surface, insolation on slanted surface, ultraviolet ray intensity, module temperatures, and electric characteristics of the modules. The continued project is an outdoor endurance test for the photovoltaic solar modules begun in fiscal 1996, which is executed by the Murdock University Energy Research Institute (MUERI). The endurance test locations were selected at Darwin, Alice Springs and Perth. This paper reports the photovoltaic solar module endurance test and investigation, as well as the periodical consultations as the activity report of the NEDO/MUERI project. (NEDO)

FY1999 technological development of wind power generation systems for islands. Development of wind power generation systems in islands; 1999 nendo ritoyo furyoku hatsuden system nado gijutsu kaihatsu. Rito ni okeru furyoku hatsuden system no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

With an objective of developing wind power generation systems that suit small to medium size islands in Japan, conceptual design was made on a 100-kW class wind mill to satisfy such requirements as no need of large heavy machines, and gust resisting performance. Investigations were performed on sites suitable for demonstration tests thereof. This paper reports the achievements in fiscal 1999. In investigating the site location feasibilities, which took small to medium size islands in Okinawa Prefecture as the discussion objects, environmental investigation, wind condition forecast and investigation, and system linkage investigation were carried out, whereas one point each in three islands were extracted as the promising sites. The system discussion and design called for wind velocity resistance of 80 m/s, system linkage percentage of 40% at maximum, power generation cost of 20 yen per kWh, design life of 20 years, constructability of requiring no large heavy machines, and operation mode of diesel hybrid use. Along with these specifications, conceptual design was performed on the system constituting elements, such as wind mill blades, generators, electric power control devices, and towers. In the blade aerodynamic test, wind tunnel tests were executed by using three types of blade wings. Sample blades were fabricated for the preparation of blade material tests. (NEDO)

FY 1998 annual report on the survey on overseas geological structures. Project for exchanging engineers (coal mining technology area) (Vietnam); 1998 nendo kaigai chishitsu kozo nado chosaa. Gijutsusha koryu jigyo (tanko gijutsu bun'ya) (Vietnam)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

The project for exchanging engineers has been implemented, in order to improve production and managemental techniques of coal mining engineers in the Asia-Pacific region, promote smooth and efficient projects for surveying overseas geological structures, and facilitate stable supply of overseas coal to Japan. The FY 1998 project was concentrated on Vietnam, to which Japanese coal mining engineers were sent, and from which production management engineers were invited to Japan as trainees. The Japanese engineers sent to Vietnam educated the underground coal mining techniques. The Vietnamese management engineers invited were trained for, e.g., production management techniques (e.g., those for workplaces and organizations) in the Japanese mines, administrative management techniques, and techniques to improve safety and productivity in the mines. Coal Energy Center and Taiheiyo Mining's Kushiro Mine provided training facilities. (NEDO)

Report on the project for spread/promotion of technology for the industrial waste optimized treatment in the Asian region (International Symposium `98); Asia chiiki sangyo haikibutsu tekiseika shori gijutsu nado fukyu sokushin jigyo (symposium kaisai) hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

In Japan and Asian countries, the optimized treatment of industrial waste is the problem with the economic growth. Border-crossing movement of the waste for promotion of the renewable use is also a problem. Therefore, the International Symposium `98 on the industrial waste problem in the Asian region was held. China, Thailand, the Philippines and Korea were invited to Japan to give lectures. MITI of Japan reported on the present situation of Japan and the cooperation with Asian countries. The industrial circle reported on efforts for environmental protection measures to be taken, the industrial waste problem at companies which advanced into Asian countries, effects of the Basel Convention on recycling activities, Japan`s role in Asia, etc. In the panel discussion, promotion of cooperation for recycling technology and Japan`s support for formulating strategy on the industrial waste were requested to Japan, and the construction of an Asian area network was proposed. Concerning the cooperative system between governments and private companies, it was concluded that it was necessary to discuss it considering the actual state of each country. Importance of recycle and information exchange was realized again. 10 refs., 15 figs., 27 tabs.

FY 1998 result report. Study of a total system for the development of superconductor power application technology (Feasibility study of commercialization of superconductivity technology and study of the introductory effect. Future superconductivity technology development in Japan); 1998 nendo seika hokokusho. Chodendo denryoku oyo gijutsu kaihatsu total system nado no kenkyu chodendo gijutsu no jitsuyoka kanosei oyobi donyu kokanado no chosa (Nippon ni okeru chodendo gijutsu kaihatsu no kongo no hokosei)

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

As a part of the New Sunshine Project, 'an R and D project on superconductor power application technology,' an examinational study was made as a mini project to clarify the developmental course for commercialization of superconductor technology. The superconductor technology is being watched with interest as a technology in the 21st century. In the application to the electric power/energy field, in particular, expected are the energy saving effect by high operation efficiency, excellent environmentality, developmental potentiality of new equipment/system by the application of ferromagnetism, etc. Accordingly, the paper analytically arranged the needs of superconductor devices in Japan and abroad and the technology seeds corresponding to the needs, and prepared the developmental subjects of superconductor technology. These developmental steps and the mutual relationship were expressed in an R and D framework. At the same time, as to the superconductivity, a survey outlined the projects carried out in each government office in Japan. The future developmental course was indicated, and proposals were made on the equipment/system as object which are the subjects for urgent development for commercialization. (NEDO)

FY 1998 result report. Study of a total system for the development of superconductor power application technology (Feasibility study of commercialization of superconductivity technology and study of the introductory effect. Future superconductivity technology development in Japan); 1998 nendo seika hokokusho. Chodendo denryoku oyo gijutsu kaihatsu total system nado no kenkyu chodendo gijutsu no jitsuyoka kanosei oyobi donyu kokanado no chosa (Nippon ni okeru chodendo gijutsu kaihatsu no kongo no hokosei)

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

As a part of the New Sunshine Project, 'an R and D project on superconductor power application technology,' an examinational study was made as a mini project to clarify the developmental course for commercialization of superconductor technology. The superconductor technology is being watched with interest as a technology in the 21st century. In the application to the electric power/energy field, in particular, expected are the energy saving effect by high operation efficiency, excellent environmentality, developmental potentiality of new equipment/system by the application of ferromagnetism, etc. Accordingly, the paper analytically arranged the needs of superconductor devices in Japan and abroad and the technology seeds corresponding to the needs, and prepared the developmental subjects of superconductor technology. These developmental steps and the mutual relationship were expressed in an R and D framework. At the same time, as to the superconductivity, a survey outlined the projects carried out in each government office in Japan. The future developmental course was indicated, and proposals were made on the equipment/system as object which are the subjects for urgent development for commercialization. (NEDO)

FY 2000 Research and development project for creation of the standards. Standardization of information-providing technologies for establishing human/machine interfaces; 2000 nendo kijun sosei kenkyu kaihatsu jigyo seika hokokusho. Hito to kikai no interface kochiku no tame no joho teikyo gijutsu ni kansuru hyojunka

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

This survey/test/research project is aimed at standardization of providing information smoothly while securing safety for various types of drivers by introducing advanced technologies into vehicles.The methods of evaluating priorities of 105 items of information for drivers, which are taken up by ISO, are followed to find that 5.90, 2.05 and 0.11 items are selected for the alarm, route guiding and general information systems, respectively. These results are in agreement with the related literature survey results. The test results of the visual/auditory displays corresponding to the priority information types indicate that the adequate alarm displays are 'red/50nt/0.2 seconds, 30% frequency/6.0 degrees' for the visual sensation, and '80dB/2.0KHz+1.5 harmonics/0.2 seconds, 70% frequency' for the auditory sensation. The study on information volume and information recognizing time indicates that the symbol pattern is better than the letter pattern for the simultaneous display of up to 2 items learned beforehand. The others studied include alarm designs and management of two or more alarms. (NEDO)

FY 2000 Research and development project for creation of the standards. Standardization of information-providing technologies for establishing human/machine interfaces; 2000 nendo kijun sosei kenkyu kaihatsu jigyo seika hokokusho. Hito to kikai no interface kochiku no tame no joho teikyo gijutsu ni kansuru hyojunka

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

This survey/test/research project is aimed at standardization of providing information smoothly while securing safety for various types of drivers by introducing advanced technologies into vehicles.The methods of evaluating priorities of 105 items of information for drivers, which are taken up by ISO, are followed to find that 5.90, 2.05 and 0.11 items are selected for the alarm, route guiding and general information systems, respectively. These results are in agreement with the related literature survey results. The test results of the visual/auditory displays corresponding to the priority information types indicate that the adequate alarm displays are 'red/50nt/0.2 seconds, 30% frequency/6.0 degrees' for the visual sensation, and '80dB/2.0KHz+1.5 harmonics/0.2 seconds, 70% frequency' for the auditory sensation. The study on information volume and information recognizing time indicates that the symbol pattern is better than the letter pattern for the simultaneous display of up to 2 items learned beforehand. The others studied include alarm designs and management of two or more alarms. (NEDO)

Development of hot water utilizing power plants in fiscal 1999. Development of technology to collect geothermal resources in great depths (Development of technology to produce geothermal resources in great depths); 1999 nendo nessui riyo hatsuden plant nado kaihatsu seika hokokusho. Shinbu chinetsu shigen saishu gijutsu no kaihatsu / shinbu chinetsu shigen seisan gijutsu no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

With an objective to develop geothermal resources, research and development has been performed on the production technologies for the deep-seated geothermal resources, such as pressure, temperature, flow speed and density (PTSD) logging technologies. This paper summarizes the achievements in fiscal 1999. In the actual well test on the developed D-probe, it was verified that the probe operates normally under high temperature environment (342 degrees C) which exceeds the measurement limit of conductive cables (315 degrees C). In developing the PTC monitoring technology, the downhole sampler was improved, and a test was performed in the actual hole in the Hijiori area in Yamagata Prefecture. As a result, collection of hot water of about 900 mL has become possible. In developing the high-temperature tracer monitoring technology, simulation was performed keeping in mind charging the tracer into the Hijiori geothermal area, whereas specifications for charging and collecting the tracer were determined. In developing the scale monitoring technology, experiments were carried out on the fluid systems under deep geothermal conditions by using scale forming devices, by which it was indicated that silica is the important scale constituent. (NEDO)

Fiscal 1999 industrial science and technology R and D (industrial-academic) project report. R and D on technologies for creating bioaffinity molecules using submicron beads (Development of practical technologies for energy saving); 1999 nendo biryushi riyogata seimeitai ketsugo busshitsu nado sosei gijutsu no kenkyu kaihatsu seika hokokusho. Energy shiyo gorika kankei gijutsu jitsuyoka kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This report summarizes the fiscal 1999 R and D result on technologies for creating bioaffinity molecules using submicron beads. By improving particle production, favorable SGNEGDE particles for drug fixation were produced on a scale 10 times as large as previous one. Various functional groups were obtained for particles immobilizing ligands. Magnetic purification was attempted by using new magnetic polymer particles. Synthesis of particle unsusceptible to non- specific bonds, and analysis of its modified surface properties were attempted. Reversible attachable-detachable surface coat was obtained by immobilizing boric acid to glycol group on affinity latex SG particles. The experiment result on affinity latex for detecting one-point mismatched DNAs showed the dependence of DNA hybridization on shearing resistance. To construct the library of new substances reacting with bio-receptors, solid phase synthesis of anti- tumor heterocyclic compounds was analyzed. The library of the pharmacology of new lead compound such as sugar moiety was also constructed. Study was made on attachment of alkaloid to a solid phase, synthetic reaction on a solid phase and library construction. (NEDO)

Report for fiscal 1998 on industrial waste optimized treatment technologies dissemination and promotion business for asian region. Holding a symposium; 1998 nendo chosa hokokusho. Asia chiiki sangyo haikibutsu tekiseika shori gijutsu nado fukyu sokushin jigyo (symposium kaisai)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

An International Symposium on the Asian Industrial Waste Issue was held in Tokyo on 4 February 1999, where lectures were delivered by participants representing China, the Philippines, Thailand, Malaysia, and Japan. More 150 people attended the event, with questions and answered animatedly exchanged between the lecturers and the audience. The progress of urbanization is quite rapid in China, with the quantity of waste increasing every years to justify the anticipation that there will be a very sharp increase in refuse incineration in the near future. Raising a serious problem in China these days is the plastic waste. In the Philippines, there are no private-sector waste treatment/disposal facilities and corporations are not obliged to take care of their waste. Consequently, very little treatment or recycling is being undertaken. In Thailand, although waste treatment/disposal centers are in operation financed by the Government and private sectors, the cost is very high, and the Government policy is that private investment will be encouraged and supported in future. In Malaysia, privatization is in progress of the business of managing waste in the solidified form. A comprehensive waste treatment/disposal plant was completed in 1998 by the endeavors of a Denmark-Malaysia consortium, and is in operation since then. (NEDO)

FY 1998 report on the waste processing/recycling related technology, 'The R and D of lead-free solder standardization'; 1998 nendo haikibutsu shori recycle kanren gijutsu seika hokokusho. Namari free handa kikakuka nado kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

To reduce the environmental pollution caused by lead eluted from the electronic equipment waste, the R and D on lead-free solder were conducted and the results were summarized. As to the basic characteristics, the evaluation test method was studied in terms of the range of melting temperature, mechanical strength, wettability and joint strength, to select a uniform test method. As the lead-free solder, Sn-Ag alloys were mainly used and mixed in a combination of Cu, Bi and In. Changes in characteristics were made clear by adding trace elements such as Ge, Mn and P. Relating to the applied characteristics, in selection of solder materials, materials were selected for which evaluation of the commercialization is proceeded with from a viewpoint of promotion of commercialization. Concerning the experimental evaluation of characteristics of lead-free solder in mounted substrates, it was indicated that basically lead-free solder can be practically used. Further, it was indicated that the Sn-Ag-Cu-Bi system depends not on solder composition but on active force, printing accuracy and flux characteristic of solder paste, that improvement of solder paste has an effect on mounting characteristics. (NEDO)

Neurobiología de la impulsividad y los trastornos de la conducta alimentaria*

Science.gov (United States)

Orozco-Cabal, Luis Felipe; Herin, David

2009-01-01

Resumen Introducción La impulsividad es un rasgo de personalidad multidimensional relacionado con el control del comportamiento y las emociones. Está presente de manera diversa en los trastornos de la conducta alimentaria, particularmente, en la bulimia nerviosa (BN). Aunque la relación entre la impulsividad y BN ha sido objeto de numerosas investigaciones, en la actualidad se desconocen los sustratos neurobiológicos de esta relación. Objetivos Discutir críticamente la evidencia que sugiere que las alteraciones en los sistemas neuronales relacio-nados con las funciones ejecutivas, con la formación de preferencias y con la regulación de los estados emocionales sirven como base para el rasgo de personalidad impulsiva, así como su estado en subgrupos de pacientes con BN. Métodos Búsqueda selectiva de la literatura relevante. Resultados y conclusiones Esta discusión ilustra la complejidad de la relación entre la impulsividad y BN, donde la impulsividad actúa como un factor de vulnerabilidad que puede sensibilizar al sujeto con BN a estados emocionales negativos, durante los cuales modifica el impacto de estímulos internos y externos sobre el comportamiento y su regulación, favoreciendo así patrones de comportamiento maladaptativos e inflexibles. PMID:19838321

Efeitos do treinamento de força específico no desempenho de nadadores velocistas treinados com parachute

Directory of Open Access Journals (Sweden)

Danilo Sales Bocalini

2010-09-01

Full Text Available OBJETIVO: verificar os efeitos do treinamento de força específico no desempenho de nadadores velocistas. METODOLOGIA: dois grupos de nadadores randomizados em treinados sem (TSP, n: 8 e com parachute (TCP, n: 12 foram submetidos a treinamento de 12 semanas (6 x semana; 1 sessão de 2 h/dia, sendo avaliados a força muscular (FMMI; a força específica (FE e o tempo de sustentação de força (TSF; o número de braçadas em 50m (NB 50m; o tempo e a velocidade de nado em 15 (V 15m e 50m (V 50m, antes e após o protocolo. RESULTADOS: após o programa de treinamento, não ocorreram modificações na FMMI e V 15m para ambos os grupos. Nas demais variáveis houve melhora significante (p 18%; FE (> 30%; TSF (> 35%; NB 50m ( 16%. O grupo TSP apresentou melhora no TSF (> 9%. CONCLUSÃO: o emprego do parachute foi eficiente em melhorar os parâmetros de força e no desempenho no teste de 50m

Aplicación de análisis discriminante para evaluar la productividad como resultado de la certificación BASC en las empresas de la ciudad de Cartagena

Directory of Open Access Journals (Sweden)

Tomás José Fontalvo Herrera

2014-01-01

Full Text Available En este artículo de investigación se presenta la evaluación de la productividad en las empresas de la ciudad de Cartagena como resultado de la certificación de éstas en la Coalición Empresa - rial Anticontrabando (CEAC, por sus siglas en inglés. En la metodología utilizada se calcularon los indicadores de produc - tividad a las 23 empresas certificadas en CEAC. En seguida, se utilizó la técnica de análisis discriminante para explicar la pertenencia y discriminación de cada grupo de los indicadores de productividad evaluados; como resultado de ello se obtuvo la correlación existente entre las empresas certificadas y el in - cremento en los índices de productividad de los años 2008 y 2010. De la función discriminante obtenida y los estadísticos analizados se puede concluir que la certificación en la norma Business Anti-Smuglin Coalition (BASC, por sus siglas en in - glés no mostró un mejoramiento en los indicadores seleccio - nados, pero presentó diferencias significativas en los indicado - res Utilidad bruta/Valor agregado (IP1, Utilidad operacional/ Capital operativo (IP5 y Utilidad neta/Capital operativo (IP6.

CONSUMO RESIDENCIAL DE ELECTRICIDAD Y EFICIENCIA ENERGÉTICA. Un enfoque de regresión cuantílica

Directory of Open Access Journals (Sweden)

Pedro Hancevic

2015-01-01

Full Text Available Utilizando una base de microdatos para el área metropolitana de Buenos Aires, se analiza la reacción del consumo de electricidad de los hogares según sus caracterís - ticas socioeconómicas, de equipamiento y de localización. Esto se estudia aplican - do el método de regresión cuantílica a lo largo de todo el espectro de la distribución de consumo, lo que permite examinar las características mejor asociadas con niveles altos de consumo (condicionales a un modelo bien especificado en donde poten - cialmente se encuentran hogares con niveles elevados de ineficiencia energética. Los dos principales resultados son la baja importancia del nivel de ingreso y la ma - yor importancia de la ausencia de acceso al gas natural, lo que indica que la falta de acceso a un energético (gas natural deriva en ineficiencias en el consumo de otro (electricidad y sugiere programas de eficiencia dirigidos a ese tipo de hogares. Otros resultados interesantes son la importancia de los equipos de aire acondicio - nado y la evidencia preliminar de que un movimiento desde casas a departamentos conlleva un menor consumo (y posiblemente una mejor eficiencia energética.

Introductory asphalt technology; Nyumon asphalt gijutsu

Energy Technology Data Exchange (ETDEWEB)

Muroga, G. [Mitsubishi Oil Co. Ltd., Tokyo (Japan)

1994-12-28

The type and applications, manufacturing method, characteristics, road pavement etc. of asphalt were introduced. Among the petroleum asphalts, straight asphalt is used for road pavement,industry, and combustion, while blown asphalt is mainly used for the waterproofness of a building. Also, the demand for modified asphalt where rubber or thermoplastic elastomer was mixed is increasing. Straight asphalt is obtained by allowing atmospheric distillation tower bottom oil to be subjected to reduced pressure distillation and drawing reduced pressure gas oil and lubrication oil cut. Blown asphalt is produced by the oxidation dehydrogeneration and condensation polymerization reaction of soft straight asphalt. Rheology characteristics of asphalt are expressed by stiffness, relaxation elastic modulus, complex elastic modulus, etc. Also, asphalt has high electrical dielectric properties. Asphalt pavement has functions for dispersing traffic load and then transferring it to a lower layer, for resisting wear and cracking, and for preventing penetration of rainwater. 30 refs., 5 figs., 4 tabs.

Fiscal 1997 project on the R and D of industrial scientific technology under consignment from NEDO (book on the handling / gas lift system). Report on the results of the R and D of the overall base technology of ocean resources (R and D of submarine oil drilling technology, etc.); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shine Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Kaiyo shigen sogo kiban gijutsu no kenkyu kaihatsu (kaitei sekiyu kussaku gijutsu nado kenkyu kaihatsu) seika hokokusho (handling / gas lift system hen)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The paper conducted a R and D on the handling of drilling equipment in drilling/collecting of submarine oil and the gas lift of artificial oil extraction technology. As to each equipment of a barge style handling system, conducted were assembly/adjustment/trial run on land and pipe handling experiments on sea. In the experiment, confirmed were pipe transfer function, lifting function, fitting function, grasping function, etc. In the ocean experiment, studied were pipe bending stress, Karman vortex control effects, etc. Relating to the gas lift system, experiments were made on confirmation of fabrication/performance of air compressor. Moreover, a technique of air transportation to the blowing inlet of the gas lift pipe was established by developing an air blowing system and fabricating a long-distance flexible pipe. Concerning the gas/liquid/solid three-phase separator, a cyclone separator was developed, and improvement in lifting efficiency was confirmed. Helped by these, the problems of the gas lift system were almost solved, and a possibility of the commercial-base production system was obtained. 2 refs., 182 figs., 47 tabs.

Vladimir Panov : obvinenija nado dokazõvat / Vladimir Panov ; interv. Jana Toom

Index Scriptorium Estoniae

Panov, Vladimir, 1941-

2008-01-01

Pistisevõtmises süüdistatud Tallinna endine abilinnapea Vladimir Panov vastab küsimustele, mis puudutavad viieaastast kohtuprotsessi ning Äripäeva ja meedia suhtumist talle esitatud süüdistusse. Kommenteerivad: Tarmu Tammerk, Andrus Saar, Edgar Savisaar

Fjodor Berman : "Nado umet terjat dengi" / Fjodor Berman ; interv. Liana Turpakova

Index Scriptorium Estoniae

Berman, Fjodor, 1951-

2006-01-01

BLRT Grupp ühendab 61 firmat kuues riigis, aktsionärid on aastate jooksul kogu teenitud raha suunanud kontserni arengusse. BLRT Grupi arengust, probleemidest kvalifitseeritud tööjõuga, majandus- ja kommunikatsiooniministeeriumi suhtumisest. Juhatuse esimehe Fjodor Bermani karjäärist Eestis, puhkusest ja vaba aja veetmisest, perekonnast

Report on surveys in fiscal 1999 on technological trends in overseas countries in research and development of the technology to create biological bonding substances utilizing particulates under the industrial and scientific technology research and development theme (university collaborated type); 1999 nendo biryushi riyogata seitai ketsugo busshitsu nado sosei gijutsu no kenkyu kaihatsu kaigai gijutsu doko chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This paper describes the surveys in fiscal 1999 on technological trends in overseas countries in research and development of the technology to create biological bonding substances utilizing particulates. Attendance was made at the U.S. Biochemistry and Molecular Biology '99 to survey signal transmission in cells, new molecules related to gene transcription control, and the mechanisms thereof. A visit was made to the U.S.A. to collect the chromatin research information. In order to analyze efficiently specific biological receptors relative chemical substances, and structure an activity evaluation system, attendance was made at a society meeting in Britain to incorporate the high throughput screening technology. Attendance was made at a publication meeting in the U.S.A. to understand the current status of the DNA micro-array process. Visits were made to American business entities and societies to survey information that contributes to efficient separation and analysis of biological receptors. American business entities and universities were visited to survey the cDNA manifestation library system, technological trends, and researches on intra-living organism systems by using molecular biology. Visits were made to research institutes and societies in the U.S.A. to survey the method for carrying ligands onto latex beads, combinatorial chemistry, and solid phase synthesis. (NEDO)

FY 1997 report on the results of the industrial technology R and D project. Development of technology to use biological resources such as the complex biological system (Development of biological use petroleum substitution fuel production technology); 1997 nendo fukugo seibutsukei nado seibutsu shigen riyo gijutsu kaihatsu seika hokokusho. Seibutsu riyo sekiyu daitai nenryo seizo gijutsu no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Experimental researches were conducted and the FY 1997 results were reported with the aim of establishing analytical technology for the complex biological system by which the complex biological system can be analyzed in such a state as it is using the molecular biological method. In the study of the molecular genetic analytical technology, PCR primers used for amplification of topoisomerase II genes of the whole eukaryote was designed. As to the histochemical analytical technology, a study was made on the new constitution microorganism detection method by the hybridization method and the antibody specific dyeing method, and the following were conducted: manifestation in quantity of colibacillus and the recovery, refining, and construction of peptide library by fuzzy display method. Concerning the functional analytical technology, technological researches were made such as the environmental adaptation mechanism of high thermophile and the information transfer mechanism among bacteria through cell membranes for elucidation of the special environment detection/response mechanism and the special environment adaptation/resistance mechanism. As to the separation/culture technology, various anaerobic microorganisms were separated from marine sponge for the development of a method of culturing in 3D matrices. (NEDO)

Fiscal 2000 survey report. Survey of long-term energy technology strategy and the like (Survey of research management technique to contribute to formulation of long-term energy strategy); 2000 nendo choki energy gijutsu senryaku ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (choki energy senryaku sakutei nado ni kansuru kenkyu kanri shuho no chosa)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For the purpose of acquiring research management related basic materials necessary in the study of long-term energy strategy, a survey is conducted of the history, theory, and techniques of research management, the state of its utilization, and the products. The results of the survey are compiled into an introduction, itemized discussion, and materials. In the introduction, the purpose and basics of research management are discussed and confirmed. Taken up in the itemized discussion are an item (1) on research management relating to the selection of themes for research and development, which discusses the formulation of research and development strategy, selection of themes for research and development, formulation of plans for them, and a theme selection assisting system, an item (2) on research management relating to the management of research implementation, which discusses the management of implementation of research and development, interim assessment, and an implementation management assisting system, and an item (3) on the studies of key points for implementation and of research management for NEDO (New Energy and Industrial Technology Development Organization) to practice. As for the materials, they comprise commentaries on theories and techniques, an ex post facto assessment system and instances of assessment, list of persons related to research management, and commentaries on reference materials. (NEDO)

Report on achievement in the preceding research related to global industry technologies for the global industry technology research and development project. Research on gas systems substituting global warming gases such as PFC used in manufacturing semiconductors; 1998 nendo chikyu kankyo sangyo gijutsu ni kakawaru sendo kenkyu. Handotai seizo nado ni shiyosuru PFC nado no chikyu ondanka gas no daitai gas system no kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

The present semiconductor manufacturing process uses a great amount of PFC having large global warming coefficients and extremely long atmospheric life. A research was made particularly on reduction of its emission from etching processes. After introducing how the semiconductor industry has been working conventionally on protection of the global environment, this paper makes clear the purpose and positioning of this preceding research, as well as how it is moved forward. The paper also reports the results of analyzing and discussing the exhaust gases from etching devices using several kinds of substitute PFC gases. Survey results are reported on the possibilities of new substitute gases, plasma decomposition and treatment of exhaust gases, reaction process simulation, and in-situ analyzing and evaluating technologies. Investigations were made on the possibility of using no PFC in wiring processes which consume greater amount of PFC, as well as on wiring techniques using inter-layer insulation film with low dielectric rate, a new wiring structure forming technology, new functional elements, circuits and systems in a wide range. Proposals were given on specific research and development themes and plans that begin in fiscal 1999. (NEDO)

Survey on peripheral techniques of brown coal liquefaction techniques; Kattan ekika gijutsu ni kansuru shuhen gijutsu no chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1980-09-01

Described herein are results of survey on brown coal liquefaction techniques and peripheral techniques, centered by COSTEAM process under development in USA, solubilization by alcohol and liquefaction and cracking with the aid of tetrahydroquinoline as the hydrogen donor under development in Japan, and low-temperature carbonization and new promising techniques. The COSTEAM process shows higher reaction rates, conversions and oil yields for brown coal liquefaction than the one using hydrogen gas. Some of the problems involved in this process high viscosity and oxygenated compound content of the product oil. The product oil is acceptable as fuel for power generating plants and can be produced at a moderate cost, but may be unsuitable as vehicle fuel. Coal liquefaction and solubilization processes are mainly represented by those which use hydrogen. The hydrogen cost, which is high, determines the product price. The processes which use alcohol or tetrahydroquinoline are still in the experimental stage. (NEDO)

Disposal machine using a hydraulic shovel loader for waste home electric appliances; Yuatsu shoberunado wo katsuyoshita haikaden shori kikai

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-09-25

This paper presents a disposal machine system developed by Hitachi Kenki Co. for waste home appliances. EX60 disposal machine and 2-axis shear shredder were developed as work machines for volume reduction and efficient disposal of waste home appliances. The shredder with rotary cutters is featured by superior crunch performance and efficient shredding of waste home appliances, and can crash not only waste home appliances but also various objects such as bulky waste, waste plastics and waste tire for passenger cars at crash torques from 7000 to 12000kgf{center_dot}m. The shredder is featured by superior mobility and easy operability by self-running and full-hydraulic driving, low- noise engine, and noise/vibration reduction by low-speed large torque hydraulic motor. EX60 disposal machine has clamp fixing waste home appliances, and a grapple for disassembling and classification, and can efficiently disassemble and classify 4 kinds of waste home appliances and other wastes only by itself. 12 figs., 3 tabs.

Fiscal 1999 research report. Survey on development trends of natural gas conversion technologies into liquefied fuel in Russia; 1999 nendo Roshia ni okeru tennen gas no ekitai nenryoka gijutsu no kaihtsu doko nado ni kansuru chosa kenkyu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Russia having world-largest natural gas resources is promoting the forefront basic research on liquefaction technology of natural gas, in particular, Fischer-Tropsch (FT) synthetic process positively. For 3 years from fiscal 1998, this project surveys the trend of R and D on catalytic technology for liquefaction of natural gas in Russia, and fabricates the prototype FT catalyst effective for liquefaction of natural gas at a Russian research institute to evaluate its practical applicability experimentally. In fiscal 1999, based on the research result in fiscal 1998, the project carried out continuous survey on the research activity of research institutes in Russia, the research trend of liquefaction technology and the concrete results of contract researches on catalyst, and summarized the evaluation result of research results. In addition, continuous world-wide document survey on FT synthetic process was made to confirm R and D trends based on the trend of liquefaction research projects in the world, and to collect basic information on catalytic reactors for FT synthetic process by document survey. (NEDO)

Fiscal 2000 report on financially supported geological structure survey overseas. Basic survey for coal resource exploitation (Research on underground probing technology); 2000 nendo kaigai chishitsu kozo chosahi nado hojokin (sekitan shigen kaihatsu kiso chosa) konai tansa gijutsu chosa hokokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For the work of searching for coal beds, comparison is made between the geological structure of the object area, which is predicted, before actual investigation, by a close scrutiny of the result of oceanic pilot boring conducted in the past, result of geophysical exploration, and the geological features of galleries already in presence in the vicinity, and the result obtained from galleries drilled actually for the investigation. The investigation was conducted at the Ikeshima coal mine, Nagasaki Prefecture. In this fiscal year, 5 investigation galleries were drilled, totalling 1640m in length, and, in the mine, geological surveys, survey and measurement, coal quality evaluation, water emergence investigation, boring for coal, etc., were carried out. Comparison was made, and, though in the 2nd Minami No. 06 air duct there was no important difference detected between the prediction and the actual result, some faults were found to exist which had not been predicted by seismic exploration on the ocean. In the 2nd Minami No. 5 air duct, the actual geology was not different from the predicted geology, this endorsing the usefulness of boring for coal. In the 2nd Minami No. 01 gallery, direction and inclination were not greatly different from what had been predicted, but some faults which had not been predicted were discovered. These faults had escaped the scrutiny of neighboring coal beds and pilot boring. (NEDO)

Fiscal 1998 research report on the development trends of natural gas conversion technologies into liquefied fuel in Russia; 1998 nendo Roshia ni okeru tennen gas no ekitai nenryoka gijutsu no kaihatsu doko nado ni kansuru chosa kenkyu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Russia having natural gas resources largest in the world is actively promoting the basic research on liquefaction technology of natural gas such as Fischer-Tropsch (FT) synthetic catalyst, and its research potential is extremely high. This 3-year research project surveys the R and D trends of catalyst technology for liquefaction of natural gas, and fabricates the prototype FT synthetic catalyst based on the idea of Russian researchers to evaluate its feasibility experimentally. This report summarizes the following to clarify the research background: (1) The technology system for liquefaction of natural gas, and its future R and D trend, (2) The R and D trends of liquefaction technology of natural gas in the world, (3) The R and D trends of liquefaction technology of natural gas in Russia, (4) The research system of catalyses in Russia, (5) The activities of Russian catalysis research institutes, (6) The fuel liquefaction technologies of Russian major research institutes, and (7) The proposals from Russian research institutes. (NEDO)

Fiscal 2000 survey report on technological trends. Survey on trend of high-density energy beam technology concerning conservation of energy; 2000 nendo gijutsu doko nado chosa hokokusho. Energy shiyo gorika ni kakawaru komitsudo energy beam technology no doko chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

There is a possibility that machining technology using high-density energy beam will bring an epoch-making change to micro-nano area processing. In particular, a laser beam having high controllability is indispensable. This is a report of the fiscal 2000 survey. The survey was conducted on laser beam generation, control and nano-diagnostic techniques, micro-nano optics technologies and machining technologies, with the development problems and targets summarized. Laser beam generation/control technologies, which become the basic tools for micro-nano manufacturing, were investigated, as were inspection technologies for the purpose of checking the functions of nano structures created. Particularly, the investigation elucidated the significance of development of a femtosecond solid state laser based on a semiconductor laser and the control techniques of their phase. Further, necessity was emphasized in developing X-ray probing, infrared and terahertz spectroscopy which are essential for nano-diagnostic techniques. In optics technologies, the paper described the importance of photonic crystals which enable less-than-wavelength machining or electrical beam control using interference effect. The possibility of fabricating photocatalysts with nano-particles was also mentioned, as was the manufacturing of nano-functional structures. (NEDO)

FY 1994 Report on the results of the joint research project for optimum introduction of development of fuel cell technologies for urban energy centers; 1994 nendo toshi energy center nado nenryo denchi gijutsu kaihatsu saiteki donyu chosa seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-05-01

Described herein are the FY 1994 results of the joint research project for optimum introduction of development of fuel cell technologies for urban energy centers or the like. The necessary economic conditions for introduction of a fuel cell system to be competitive with the conventional system which individually supplies electric power and heat are 250,000 yen/kW as the construction unit cost, 0.10m{sup 2}/kW as the installation area, 5 years as the cell body life, use of an inexpensive fuel gas (2 to 6 yen/Mcal). Moreover, it is an indoor system which shall have the operational characteristics to follow daily demand fluctuations while operating under the optimum conditions in the urban redevelopment area considered. A 5,000kW-class fuel cell plant burning fuel gas (2 yen/Mcal) will need a total floor area of approximately 400,000 m{sup 2} in an energy-intensive office type demand area. These conditions shall be met in order to economically introduce the 5,000kW-class plant. It is also necessary to compare the plant with the competitive cogeneration plants. The specifications for the prototype now under consideration are sufficient for the energy-saving effect, and it is premised that these specifications and characteristics are secured. (NEDO)

Next-generation coal utilization technology development study. Environmentally-friendly coal combustion technology; topping cycles; Sekitan riyo jisedai gijutsu kaihatsu chosa. Kankyo chowagata sekitan nensho gijutsu bun`ya (topping nensho gijutsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-03-01

As a realistic measure to reduce environmental pollutants emitted from coal-fueled boilers, a developmental study was conducted of high-efficient combustion systems. In fiscal 1994, four types of topping cycles which are different in system structure and gasifier type were selected, and topping cycles assuming a 300MW-class power plant were trially designed. Further, an evaluation of adaptability of these systems was made, and an selection of the optimum system for the early development was made among the systems. As a result, the evaluation was obtained that `a system using air blown gasifier` is most suitable for conducting the next-stage research. In the element test on the topping combustion technology, collection was made of data of desulfurization activity, desulfurization oxidation mechanism and alkali metal behavior at the laboratory level, data of temperatures and gas concentration distribution in coal gasification, data of simulation of the gasifier reaction, and the other data. 262 figs., 66 tabs.

Particle collisions near a three-dimensional warped AdS black hole

Science.gov (United States)

Bécar, Ramón; González, P. A.; Vásquez, Yerko

2018-04-01

In this paper we consider the warped AdS3 black hole solution of topologically massive gravity with a negative cosmological constant, and we study the possibility that it acts as a particle accelerator by analyzing the energy in the center of mass (CM) frame of two colliding particles in the vicinity of its horizon, which is known as the Bañnados, Silk and West (BSW) process. Mainly, we show that the critical angular momentum (L_c) of the particle decreases when the warping parameter(ν ) increases. Also, we show that despite the particle with L_c being able to exist for certain values of the conserved energy outside the horizon, it will never reach the event horizon; therefore, the black hole cannot act as a particle accelerator with arbitrarily high CM energy on the event horizon. However, such a particle could also exist inside the outer horizon, with the BSW process being possible on the inner horizon. On the other hand, for the extremal warped AdS3 black hole, the particle with L_c and energy E could exist outside the event horizon and, the CM energy blows up on the event horizon if its conserved energy fulfills the condition E2>(ν 2+3)l2/3(ν ^{2-1)}, with the BSW process being possible.

Atrésia Esofágica: Um Desafio desde o Diagnóstico Pré-natal ao Tratamento Cirúrgico

Directory of Open Access Journals (Sweden)

Vera Trocado

2018-02-01

Full Text Available A atrésia esofágica é a anomalia congénita mais comum do desenvolvimento do esófago, caracterizando-se por uma disrupção da sua continuidade, com uma prevalência de cerca de 1 em cada 2500 a 4500 nados vivos. A abordagem desta condição, desde o seu diagnóstico no período pré-natal até ao tratamento cirúrgico no período neonatal, constitui um importante desafio, tanto para o obstetra como para o cirurgião pediátrico. No âmbito do diagnóstico pré-natal, a ecografia, a ressonância magnética, bem como a análise bioquímica do líquido amniótico poderão ser úteis. Por outro lado, no que diz respeito ao tratamento cirúrgico desta condição, dispomos hoje de técnicas cirúrgicas minimamente invasivas, associadas a menor número de sequelas musculoesqueléticas, menor dor no pós-operatório e a um melhor resultado estético final. Neste artigo, os autores fazem uma revisão do papel das diferentes técnicas de diagnóstico pré-natal disponíveis, bem como das diferentes abordagens para o tratamento cirúrgico.

De la ecología de medios a la ecología profunda de medios: esclarecer la metáfora y visibilizar su impacto medioambiental

Directory of Open Access Journals (Sweden)

Jesús Antonio Arroyave-Cabrera

2017-01-01

Full Text Available La ecología de medios ha generado una reflexión importante de la díada tecnología-sociedad. Sin embargo, a pesar de acuñar un concepto relacio-nado con el medio ambiente, diferentes autores han cuestionado que dicho campo multidisciplinario no haya derivado en ningún aporte importante relacionado con el contexto ambiental. Respecto de la ecología de medios, las tecnologías han causado un impacto definitivo sobre el planeta. No obs-tante, recientes tendencias en la investigación en comunicación conceptúan que este cambio trasciende lo simbólico y se instala en lo material con con-secuencias serias en los ecosistemas, en los seres vivos y en la sostenibilidad del planeta. Utilizando como base los planteamientos del filósofo norue-go Arne Naess, el presente artículo intenta contribuir a subsanar la deuda pendiente que tiene la ecología de medios con el contexto ambiental. Para propiciar esta reflexión, extendemos la metáfora de la ecología de medios a la ecología profunda de medios para a partir de este marco analizar la re-lación entre tecnologías y los aparatos/artefactos asociados a los medios y su relación con la sociedad.

"Estoniju v JeS zashtshishtshat ne nado!" / Signe Ratso ; interv. Eteri Kekelidze

Index Scriptorium Estoniae

Ratso, Signe, 1960-

2004-01-01

Majandus- ja kommunikatsiooniministeeriumi asekantsleri Signe Ratso sõnul ei too Eesti liitumine Euroopa Liiduga mingeid ootamatusi, Eesti ja EL muutuvad üheks majandusruumiks koos sellest tulenevate tagajärgedega. Tabel: Import kolmandatest riikidest 2003. a. 11 kuu jooksul

Industry brief letter; Kasupikaioki sekiyu koku kaihatsu sekiyu shigen kaihatsu nado sannyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-02-01

4 companies of Petroleum Resources Development, Indonesia Petroleum, Teikoku Petroleum an Itochu Petroleum Development will sign petroleum exploration and development contract in petroleum mining property offshore of Caspian Sea with Azerbaijan National Petroleum Company, Sokar Company. In another mining property, Mitsui group reached conclusion with Sokar Company in mining right. Resource development competition between existing international petroleum majors and Japanese petroleum companies around Caspian Sea may be further intensified. (translated by NEDO)

Fiscal 1996 verification survey of geothermal exploration technology. Development of the fracture type reservoir exploration method (development of the elastic wave use exploration method); 1996 nendo chinetsu tansa gijutsu nado kensho chosa. Danretsugata choryuso tansaho kaihatsu (danseiha riyo tansaho kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

For the purpose of exploring accurately fracture groups greatly restricting the fluid flow of geothermal reservoirs, technical development was made for applying the elastic wave exploration technology such as the high precision reflection method, VSP, elastic wave tomography to the geothermal exploration. The Okiri area, Kagoshima prefecture was selected as a demonstrative field of a typical type where the steep and predominant fracture rules the geothermal reservoir, and experiments were conducted using the high precision reflection method and VSP. Fracture models were made, and the analysis results were studied by a survey using the array CSMT/MT method and by a comparison with existing data. Reformation of the underground receiving system used for VSP and elastic tomography is made for improvement of its viability, and was applied to the VSP experiment. The treatment/analysis system of the core analyzer was improved, and cores of the demonstrative field were analyzed/measured. Further, the exploration results, core analysis results and existing data were synthetically analyzed, and fracture models of the demonstrative field were constructed. Also, effectiveness and viability of the elastic wave use exploration method were studied. 90 refs., 418 figs., 24 tabs.

FY 1998 result report. Report on the results of the examinational research on the trend of technology development in the iron/steel industry; 1998 nendo seika hokokusho. Tekko sangyo no gijutsu kaihatsu doko nado ni kansuru chosa kenkyu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

The trend of the technology development in the Japanese iron/steel industry was compared with those in foreign countries and surveyed to increase the international competitive strength. From the viewpoints of technology, industry and goods, the iron/steel field was characterized based on the statistic data, and especially automobile use steel materials were selected such as cold rolling high tension steel sheet, surface treated steel sheet, and bearing sheet. The analysis of factors of competitive superiority was conducted, and the following were presented: measures for process continuation, and measures taken from the age of equipment and cost indexes. The paper also surveyed the trend of pig iron making/steel making technology in Asia. The present international technical competitiveness in the iron/steel industry in Japan, especially of automobile use steel sheet, is very high. This is because of the well-functioned demand-oriented development, and also as a result of the mutually influentially conducted equipment development such as process continuation and development of new goods, supposing the iron/steel continuous process and reduction in impurities. However, fears are the stagnation in the recent technical development strength and the saturation of new equipment. Moreover, the further heightening is needed of the international cost competitive strength of general-purpose products. (NEDO)

Fiscal 1998 New Sunshine Project research report. Development of separation technology of hetero-compounds from coal-derived oil, and use methods of them; 1998 nendo sekitan ekikayuchu no tetero kagobutsu nado no bunri gijutsu to yoto no kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

This project develops the efficient separation technology of compounds including hetero-atoms such as O and N from coal- derived oil, and researches effective use methods of them. Study is made on the concrete applications and problems of the following separation technologies of hetero-compounds: Distillation/refrigeration, extraction, supercritical gas extraction, pressurized crystallization, crystallization, adsorption, and membrane separation technologies. Based on the study result, the applicability of such various separation technologies of hetero-compounds from coal-derived oil fractions is confirmed experimentally. By using the newly developed bench-scale test equipment of an optimum separation process, the process performance is confirmed, and various engineering data are collected. Study is also made on the effective use method of the hetero-compounds separated by the above equipment. In fiscal 1998, as the electric membrane dialysis experiment result on phenolates derived from phenols in Kashima pilot naphtha and atmospheric light oil, the existence of substances (Ca, Fe, SO{sub 4}) deteriorating membranes was confirmed. Preventive measures against contamination of these bivalent cations and anions are one of future issues. (NEDO)

FY 2000 report on the verification survey of geothermal exploration technology, etc. Development of the reservoir fluctuation exploration method - Phase 2 (Feasibility survey); 2000 nendo chinetsu tansa gijutsu nado kensho chosa hokokusho. Choryuso hendo tansaho kaihatsu phase 2 F/S chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For the purpose of developing the technology to grasp the behavior of geothermal fluids flowing inside the deep-seated reservoir, study of subjects was made for the reservoir fluctuation exploration method - Phase 2. In the overview of the reservoir fluctuation exploration method - Phase 1, various element technologies being developed in Phase 1 were arranged in terms of the overview of technology, results concretely obtained, present subjects, achievement of technical development, etc. In the overview of geothermal fields, domestic geothermal fields and overseas geothermal fields were outlined of which demonstrative tests in Phase 2 can be made. In the survey, data on characteristics of reservoirs at the sites proposed, existing data usable for the project and information of the existing facilities were covered in terms of the those that can be collected being based on the public data. In the study of demonstrative testing fields, to make selection of demonstrative testing fields in Phase 2, selection of conditions was made from the two points of view: 'necessary conditions for demonstrative testing field' and 'comparison in adaptability of geothermal fields by method.' (NEDO)

Fiscal 1997 report on the verification survey of geothermal exploration technology. 2. Development of the reservoir variation survey method (development of the gravity survey method); 1997 nendo chinetsu tansa gijutsu nado kensho chosa. Choryuso hendo tansaho kaihatsu (juryoku tansaho kaihatsu) hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Among technology developments such as the reservoir evaluation at initial developmental stage and stabilization/maintenance of power after the start of operation, the fiscal 1997 result was described of the development of the gravity survey method. The paper conducted the installation of gravity measuring points outside the existing monitoring range, introduction of CG-3M gravimeter/GPS measuring system, drilling of ground water level monitoring well, etc. for the setup of a system for new gravity monitoring. Moreover, regular measurement of gravity was made for the first fiscal year, and at the same time the continued observation of ground water level, precipitation, atmospheric pressure, and temperature was started. It is necessary to study the effects on gravity variation such as gravity gradient and tidal correction. Conducted were collection/arrangement of the existing data and database construction for history matching/variation prediction in the Yanaizu Nishiyama area. The paper made surveys of the trends/literature. In the future, needed are the computation using density models of geothermal reservoirs and test use of EDCON`s downhole gravimeter. 44 refs., 30 figs., 17 tabs.

Fiscal 2000 achievement report. Development of comprehensive technologies for environmental conservation including prevention of global warming by the carbonization of wood, etc.; 2000 nendo jumoku nado no tanka ni yoru ondanka boshinado fukugo kankyo taisaku gijutsu no kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Efforts are exerted to develop new technologies whereby carbon dioxide is absorbed by and fixed in rapidly growing trees. The trees are felled and subjected to high-efficiency carbonization, and the thus-obtained carbonized material is used for environmental purification or the like and then buried in the ground. Studies are under way to find out if the cycle (operations) may be organized into an industry. Activities are conducted in the five fields of (1) carbonized materials, (2) carbonization, (3), industrial use of charcoal, (4) stabilization of charcoal, and (5) reports on surveys (mainly overseas). In field (2), following an introduction consisting of the carbonization mechanism and the definition of terms, surveys are conducted of the existence of carbonizable resources in Japan, distribution channels of imported charcoal and activated charcoal in Japan, various carbonization apparatuses, carbonization equipment incorporated into gasifying fusion furnaces, carbonization furnace as a system, and the trends of development of pyroligneous acid and development of its use. In field (3), studies are made on its use in industries, on its application to agriculture, forestry, and livestock industry, and on the utilization of its electromagnetic properties. (NEDO)

Verification survey of geothermal exploration technology, etc. Report on the result of the developmental research on the development of the fracture type reservoir exploration method; Chinetsu tansa gijutsu nado kensho chosa. Danretsugata choryuso tansaho kaihatsu kenkyu kaihatsu seika sokatsu hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

For the purpose of grasping fracture groups forming geothermal reservoirs with accuracy, the development of the fracture type reservoir exploration method has advanced the technical development of exploration methods of seismic wave use, electromagnetic induction use, and micro-earthquake use. This paper summarized main results of the development and problems to be solved in the future. In the development of the seismic wave use exploration method, the high accuracy reflection method using seismic wave, VSP and seismic tomography were adopted to the geothermal field, and technology effective for the exploration of fracture type reservoirs was developed. In the development of the electromagnetic induction use exploration method, the array CSMT method which can measure multiple stations along the traverse line at the same time was developed with the aim of grasping effectively and accurately fracture groups forming geothermal reservoirs as changes of resistivity in the shallow-deep underground. In the fracture group forming geothermal reservoirs, micro-earthquakes are generated by movement of thermal water and pressure variations. In the development of the micro-earthquake use exploration method, developed was the micro-earthquake data processing and analysis system (MEPAS). 179 refs., 117 figs., 28 tabs.

Fiscal 1996 survey report on overseas technology concerning R and D on advanced chemical processing technology; 1996 nendo senshin kino soshutsu kako gijutsu no kenkyu kaihatsu kaigai gijutsu chosa hokokusho. Kokoritsu hatsuden'yo buzai sosei gijutsu kaihatsu / sekiyu seisan system fushoku boshi gijutsu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

R and D was conducted on technologies for ultra high purity separation/processing, ultra fine particle crystal control, and high functional organic material synthesis and support. The results were classified into four categories and, on the basis of the results, the researchers paid a visit to and had a conference with related organizations overseas, for the purpose of exchanging opinions with European and American specialists and extracting evaluation and problems of the results. On laser CVD/organic thin film technology, eight institutions including University College London were visited by the researchers, with opinions exchanged on eight subjects such as studies on synthesis of high functional metallic thin film using the laser MOCVD method. On new materials/processing technology, seven institutions including MIT were visited, with opinions exchanged on the results of four researches such as preparation of Pb-based ferroelectric thin film using multi-ion-beam sputtering method. On micro-structure characterization technology, six institutions including MIT were visited, with opinions exchanged on the results of nine studies such as micro-structure characterization by transmission electron microscopy. On ion CVD/ion implantation technology, five institutions including The University of Salford were visited, with opinions exchanged on the results of seven researches such as creation and utilization of ultra-high vacuum. (NEDO)

Fiscal 1996 survey report on overseas technology concerning R and D on advanced chemical processing technology; 1996 nendo senshin kino soshutsu kako gijutsu no kenkyu kaihatsu kaigai gijutsu chosa hokokusho. Kokoritsu hatsuden'yo buzai sosei gijutsu kaihatsu / sekiyu seisan system fushoku boshi gijutsu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

R and D was conducted on technologies for ultra high purity separation/processing, ultra fine particle crystal control, and high functional organic material synthesis and support. The results were classified into four categories and, on the basis of the results, the researchers paid a visit to and had a conference with related organizations overseas, for the purpose of exchanging opinions with European and American specialists and extracting evaluation and problems of the results. On laser CVD/organic thin film technology, eight institutions including University College London were visited by the researchers, with opinions exchanged on eight subjects such as studies on synthesis of high functional metallic thin film using the laser MOCVD method. On new materials/processing technology, seven institutions including MIT were visited, with opinions exchanged on the results of four researches such as preparation of Pb-based ferroelectric thin film using multi-ion-beam sputtering method. On micro-structure characterization technology, six institutions including MIT were visited, with opinions exchanged on the results of nine studies such as micro-structure characterization by transmission electron microscopy. On ion CVD/ion implantation technology, five institutions including The University of Salford were visited, with opinions exchanged on the results of seven researches such as creation and utilization of ultra-high vacuum. (NEDO)

Next-generation coal utilization technology development study. Environmentally-friendly coal combustion technology; O2/CO2 combustion technology; Sekitan riyo jisedai gijutsu kaihatsu chosa. Kankyo chowagata sekitan nensho gijutsu (sanso nensho gijutsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-03-01

For the purpose of developing combustion systems in which environmental pollutants are less emitted from coal-fired boilers, conducted in fiscal 1994 were a study of load followability of oxygen producing equipment, and element and basic tests on oxygen combustion systems. Dynamic simulations were made to confirm load followability of low-purity oxygen producing equipment. Further, a test was made on starting time of oxygen producing equipment. As a result of the simulation, favorable load followability was confirmed except for some of the process. The width of variation of the product oxygen purity was {plus_minus} 0.7% at maximum. In the element test on oxygen combustion systems, an experiment on the oxygen combustion using pulverized coal was conducted to study heat collection characteristics of furnace and response to multi-kind of coal. A study of balance of S content, experiments on characteristics of crushing/transporting pulverized coal, etc. were added. There were seen no peculiar differences in CO2 transport and air transport. 216 figs., 31 tabs.

Fiscal 1997 report on the results of the New Sunshine Project subsidiary operation. Development of a geothermal water use power plant, etc. / technical development of the hot dry rock power generation system (development of electric technology); 1997 nendo New Sunshine keikaku hojo jigyo seika hokokusho. Nessui riyo hatsuden plant nado kaihatsu (koon gantai hatsuden system no gijutsu kaihatsu (yoso gijutsu no kaihatsu))

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

For the purpose of using hot dry rock energy to power generation, the R and D was continued of element technology of the hot dry rock power generation. In fiscal 1997, the construction of ground facilities, etc. for long-term circulation experiment was proceeded with to make data analysis for study of the experimental results. As for preparation for the long-term circulation experiment, design/fabrication/construction of experimental facilities were commenced, and review/fabrication of the monitoring system were conducted to strengthen the monitoring network of microearthquakes. In relation to the analytical research, using models connecting reservoirs and wells, relationships were studied among the distance between injection well and production well, production flow rate, and long-term thermal extraction characteristics of reservoirs. Further, to study structures of shallow/deep reservoirs at the Hijiori hot dry rock experimental field, re-determined were mechanism solutions of AE in deep hydraulic fracturing experiments, three well circulation tests, and preliminary circulation tests, and at the same time stress fields were studied. Fracture models were made and the simulation program was revised. 18 refs., 82 figs.

Report on the surveys in fiscal 1999 on the long term energy technology strategy investigations. Investigations on foundations to establish industrial technology strategies (Structuring of emphasizing strategies and the circulation type economic society harmonizing with environment); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chosa hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (jutenka senryaku (kankyo to chowashita junkangata keizai shakai no kochiku))

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This paper is a survey report for fiscal 1999 on structuring of the circulation type economic society harmonizing with environment. In order for Japan in the 21st century to solve various problems while maintaining sustainable development of the industries and economy, structuring the industrial technology strategies is indispensable. In order to establish targets to structure the circulation type society harmonizing with environment, small targets were broken down and specific technological examples were extracted as seen from categories based on flows of goods and the policy aspects. Then, from the viewpoints of extrication from wastes, reduction of risks caused by harmful substances, and growth under suppression of the global warming, case studies were performed on policy aspects toward the year 2010. Based on these studies, images of the emphasizing strategies were prepared, that are built on three pillars of 'R', the reduction, reuse and recycling. Specific technological examples were extracted comprehensively and specifically from research and development themes in research institutions inside and outside Japan to prepare a fundamental material for establishing the small targets. Furthermore, the examples were classified from the aspects of the three Rs. Areas of technological development seeds and areas with fewer seeds were made clear successfully. (NEDO)

FY 1998 report on the project for development of hot water utilizing power generating plants and others, supported by New Sunshine Project. Development of extraction technologies and development of production technologies for the deep-seated geothermal resources; 1998 nendo nessui riyo hatsuden plant nado kaihatsu seika hokokusho. Shinbu chinetsu shigen saishu gijutsu no kaihatsu / shinbu chinetsu shigen seisan gijutsu no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Described herein are the FY 1998 results of the activities for development of extraction and production technologies for the deep-seated geothermal resources, which are expected to contribute to increased geothermal power generation capacity. The program for the PTSD logging technology connects the S probe to PT probe, to simultaneously measure temperature, pressure and volumetric flow, producing the data of good quality even in a high temperature environment over 327 degrees C. Thus, possibility of the commercial system is confirmed. The D probe also produces a density calibration curve showing very good linearity, and operates normally in a high temperature environment of 406 degrees C. The program for the PTC monitoring technology conducts the field tests at Larderello, Italy, to confirm the sampler functions in a high temperature environment. The program for the tracer monitoring technology extracts promising tracers stable at high temperature from those for the liquid, vapor and liquid/vapor mixed phases. Silica is observed to be massively dissolved at 400 to 1,000mg/kg in the fluid under deep geothermal conditions. Scale precipitation rate is minimal for the first 21 days, but increases linearly with time thereafter. The experiments are also conducted for formation and prevention of the Fe-Si-based scales during the flushing period. (NEDO)

Development of hot water utilizing power plants in fiscal 1999. Development of technology to collect geothermal resources in great depths/Development of technology to excavate geothermal resources in great depths (Designing whole development); 1999 nendo nessui riyo hatsuden plant nado kaihatsu seika hokokusho. Shinbu chinetsu shigen saishu gijutsu no kaihatsu / shinbu chinetsu shigen kussaku gijutsu no kaihatsu (zentai kaihatsu sekkei)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Technological development has been made on excavation of geothermal wells, which are dense, hard, and high in temperature and pressure, in developing geothermal resources in great depths. This paper summarizes the achievements in fiscal 1999. This fiscal year has performed the excavation test using an actual well to verify the reliability in practical use of the developed heat-resistant and durable bit. The test was executed by using a bit with a diameter of 8-1/2 inches in a ground bet having a maximum temperature of 300 degrees C in the Yamakawa geothermal field. As a result, good site evaluation was obtained that the wear and tear after lift-up showed no problems, and sufficient performance was verified in the drilling rate and durability. In addition, the low specific gravity cement for high temperature use that has been newly developed was given a cement mixing test to identify its workability at site and hardening properties, at a test well with a temperature of about 40 degrees C in the Okiri geothermal field. The actual well test was performed in a large-scale lost water occurred in a return well during an excavation by Nittestu-Kagoshima Geothermal Company. Effects were recognized in measures to prevent water loss. (NEDO)

Fiscal 1999 project for research and development of industrial and scientific technologies. Report on the achievements on the 'research and development of an ultimate atom and molecule manipulation technology' (Development of a technology to analyze and manipulate DNAs at high efficiency); 1999 nendo genshi bunshi kyokugen sosa gijutsu no kenkyu kaihatsu seika hokokusho. DNA nado kokoritsu kaiseki sosa gijutsu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

In the 'research and development of an ultimate atom and molecule manipulation technology', research has been made on an organic atom and molecule identification and manipulation technology and a dynamic organic molecule simulation technology. This paper summarizes the achievements in fiscal 1999. In the magnetic force controlling AFM for the force spectroscopy aimed at non-destructive atom and molecule identification, a prototype cantilever was fabricated that can excite and detect displacement in lateral direction and is suitable for friction measurement. The SrO surface and TiO2 surface of SrTiO{sub 3}. A carbon nano-tube was employed as a probe. In addition, the molecule inserting SAM technology was used to have developed a technology to measure electric conductivity inside and between molecules. With an aim at realizing a high-speed DNA base arrangement analyzing method, research is being performed upon noticing the single molecule method based on the light measuring method using the single molecule imaging as the base and the scanning probe microscope method. For the dynamic organic molecule simulation technology, theoretical analysis was advanced on synthesis of methanol on copper surface. (NEDO)

Automobiles and safety; Jidosha gijutsu. Jidosha to anzen

Energy Technology Data Exchange (ETDEWEB)

Kawakami, K.; Goto, T.; Shimizu, T.; Yamanaka, A. [Toyota Motor Co. Ltd., Aichi (Japan)

1998-08-01

The number of road traffic victims in Japan has been above the level of 10,000 annually during 8 consecutive years, but in 1996 and 1997, it becomes below this level. The casualty of road traffic accidents is found to be occurred during driving and senior persons account for a large part among victims while 55.1% of the case took place at night. As for the countermeasures, it is possible to indicate the regulatory strengthening, advancement of accident investigation and analysis, provision of safety information to the user and research and development of advanced safety vehicle (ASV). Concerning preventive safety, studies on the human recognition, systems for assisting judgement and running and so on can be enumerated. The ASV is in the course of 2nd program that lasts until 2001 with 6 safety research subjects such as prevention, collision, automatic operation, containment of disaster from expanding and so forth. In terms of post-accident safety, remarkable research and development have been conducted on collision by means of dummy and human body, human resistance against injury, air bag for rider protection and child seat, and especially the form comparison of interior materials for head protection apparatus as well as study via simulation, together with commercialization of side bag for reducing head damages. As for car body materials, energy absorption by pillar type elements, use of aluminum materials, resistance comparison and design concept of structural separation and so on are being carried out. 69 refs., 1 fig.

Microbial EOR technology; Biseibutsu EOR gijutsu no kenkyu

Energy Technology Data Exchange (ETDEWEB)

Taguchi, M.; Yonebayashi, E. [Tech. Research Center, Japan National Oil Corp., Tokyo (Japan)

1995-11-10

This paper describes attempts of establishing an oil recovery technology utilizing microorganisms and of aiming at improving the practicability of that technology. Fiscal 1994 has investigated effects of inorganic salts existing in reservoir beds and NaCl concentrations on proliferation of microorganisms and production of metabolites. The investigation was intended to discuss applicability of microorganisms to environments that are brought closer to actual field conditions. Furthermore, a core sweeping test using sandstone was carried out on the fiscal 1992 separated bacteria, the 4118 bacteria, that has high surfactant production capability. In addition, a sand pack was used to perform a flooding experiment under conditions of 50{degree}C and 50 KSC to evaluate functionality of microorganisms when environments in the reservoir bed are simulated with respect to pressures and temperatures. An oil recovering experiment was carried out using a sandstone with a diameter of 1.5 inches, a length of 1.0 foot and permeability of 600 md, and using Bacillus subtilis 4118 bacteria which attained the lowest interfacial tension among the bacteria examined. A recovery rate of 4.4% Sor was derived in the experiment. A recovery rate of 29.0% Sor at maximum was obtained when Bacillus licheniformis 18-2-a bacteria was supplied into a sand pack filled with silica sand. 20 figs., 7 tabs.

Paradigm for new scientific technology; Shinkagaku gijutsu paradigm

Energy Technology Data Exchange (ETDEWEB)

Shindo, Y [National Chemical Lab. for Industry, Tokyo (Japan)

1995-01-05

This paper reviews the current status from the standpoint of chemical engineers facing the coming of the 21st century, and surveys the paradigm for new scientific technologies. The criticism is mixed with unique opinions everywhere, such as `departure of students from scientific and engineering faculties is none other than the result of a market principle`, `national burden of trillions of yens should not be spent only under a justice of advancement of the science`, and `the global civilization itself has no other way but to change from the conventional expansive development type of the western country style to the internal development type of the oriental country style`. Values that define the paradigm for new scientific technologies may include such keywords as saturation in technology, baseless expansion of research projects, criticism on science, market principle, and centering human being. It should be looked at seriously that profit from research and development should exceed the cast invested therein in the future, and scientific technologies that serve truly the society should be aimed at. These efforts will result in one of the large pillars that support the future in which creation of new functions is aimed at as a result of structuring the new systems. Trying to overcome the environmental problems is one of them.

Intelligent social infrastructure technology. Infrastructure technology support ultra-reliable society; Chiteki shakai kiban kogaku gijutsu. Choanshin shakai wo sasaeru kiban gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

This survey was conducted to construct the core of intelligent social infrastructure technology (ISIT), and to investigate its practical application to industries and society. For realizing the ultra-safe and ultra-reliable society, it is necessary to develop the ISIT which can integrate various social infrastructures, such as architecture, city, energy, and lifeline systems required for living. For the systematization of cities, it is necessary to process and control the intelligent information by holding integrated and transverse information in common, as to logistics, lifeline, communication, monitoring, and control. For the communication engineering, the centralized systems are acceleratingly to be converted into the distributed network systems. For the mechanical engineering, intelligent control and robot technology are required. For the architectural engineering, a concept exceeding the conventional antiseismic structure idea is investigated. It is necessary to develop a new information technology providing an intelligent social infrastructures by merging the information networks and the physical world seamlessly. Necessity of ISIT is large for constructing the intelligent and ultra-reliable society consisting of these integrated and organized networks. 84 refs., 68 figs., 6 tabs.

Report on a survey in fiscal 1999. Survey on possibilities of environmental cooperation in relation with proliferation of environment preservation technologies and institutions in developing countries; 1999 nendo kankyo taisaku gijutsu seido nado no tojokoku fukyu ni kakawaru kankyo kyoryoku kanoseichosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Cooperation in energy and environment aspects with developing countries is considered very important in view of the following points: (1) the cooperation will help developing countries to grow economically while minimizing the damages from industrial pollution and environmental problems; (2) conservation of energies and promotion of use of new energies will contribute to solving pollution problems associated with energy production, and will result in assurance of stability of primary energy availability for Japan; (3) preservation of environments in countries exporting foods to Japan will link to maintaining health of Japanese people and increasing their welfare; and (4) Japanese industrial pollution preventing technologies and knowledge whose levels are high worldwide may be utilized to create new business chances for Japanese business entities. The present survey has discussed the importance by territories, the importance by cooperation modes, and sharing of roles by governmental and private organizations, and performed case studies. Considerations were given from the discussion results on how the environmental projects should be planned in the environment cooperation, the contents to be of win/win from the viewpoint of motivation, the project image for subjected territories being composite and comprehensive, and the cases from the viewpoint of mutual coexistence referred to as prevention of global warming and assurance of food and energy resources. (NEDO)

Report on research achievement in relation with developing fundamental combustion control technologies in fiscal 1998. Research and development of high-performance industrial furnaces; 1998 nendo nensho seigyo kiban gijutsu no kaihatsu ni kansuru kenkyu seika hokokusho. Koseino kogyoro nado ni kansuru kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Development is intended to be made on fundamental combustion control technologies applicable to high-performance industrial furnaces that can reduce energy consumption and respond to environment preservation requirements. With an intention to achieve reduction in combustion exhaust gases such as carbon dioxide and nitrogen oxides, fundamental studies will be made on factors to decide flame shapes as represented by high-temperature combustion and flame shape control by utilizing microgravity environment, and researches will be made on combustion systems. Devices required for the experiments were fabricated to evaluate critical combustion characteristics of flames in furnaces including industrial furnaces, analyze and evaluate flame control parameters, and study low-pollution combustion technologies. Experimental methods acquired by 1997 were used for the experiments under the microgravity environment. Evaluation experiments were performed on flame shape control technologies and flame radiation characteristics, and basic experiments on the low-pollution combustion technologies. With these experiments, elucidation of the combustion mechanisms was launched by analyzing and evaluating the acquired data. A flame experimenting device for high-temperature preheated air completed by fiscal 1997 was used to acquire such combustion characteristics data as NOx discharge characteristics when the high-temperature preheated air is used. Based on the result thereof, verification was carried out on simulation models. (NEDO)

FY 2000 research and development of fundamental technologies for AC superconducting power devices. R and D of fundamental technologies for superconducting power cables and faults current limiters, R and D of superconducting magnets for power applications, and study on the total systems and related subjects; 2000 nendo koryu chodendo denryoku kiki kiban gijutsu kenkyu kaihatsu seika hokokusho. Chodendo soden cable kiban gijutsu no kenkyu kaihatsu, chodendo genryuki kiban gijutsu no kenkyu kaihatsu, denryokuyo chodendo magnet no kenkyu kaihatsu, total system nado no kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

The project for research and development of fundamental technologies for AC superconducting power devices has been started, and the FY 2000 results are reported. The R and D of fundamental technologies for superconducting power cables include grasping the mechanical characteristics associated with integration necessary for fabrication of large current capacity and long cables; development of barrier cable materials by various methods; and development of short insulated tubes as cooling technology for long superconducting cables, and grasping its thermal/mechanical characteristics. The R and D of faults current limiters include introduction of the unit for superconducting film fabrication, determination of the structures and layouts for large currents, and improvement of performance of each device for high voltages. R and D of superconducting magnets for power applications include grasping the fundamental characteristics of insulation at cryogenic temperature, completion of the insulation designs for high voltage/current lead bushing, and development of prototype sub-cooled nitrogen cooling unit for cooling each AC power device. Study on the total systems and related subjects include analysis for stabilization of the group model systems, to confirm improved voltage stability when the superconducting cable is in service. (NEDO)

Fiscal 1997 project on the R and D of industrial scientific technology under consignment from NEDO. Report on the results of the R and D of new software structuring models (R and D of micromachine cooperative control use software); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Shin software kozoka model no kenkyu kaihatsu (bisho kikai kyocho seigyoyo software no kenkyu kaihatsu) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

A R and D was conducted of software structuring models which ease the development and maintenance of software systems and meet diversification of needs. As for the study of the cooperative control use programming language, a R and D of agent oriented language Flage was carried out for expansion of language function, arrangement of network function, development of exercises, etc. As to the formulation of agent knowledge, proposed were processes to make a program from the specifications, and EVA, a mechanism in response to changes in the specifications of existing programs. In relation to the basic theory of cooperation system, a study was made mainly of object oriented attribute grammar OOAG as a model representing cooperative computation in software process as a rule group. Concerning the study of the situation recognition mechanism, researched were models of communication and reasoning among agents in cooperation. 187 refs., 107 figs., 23 tabs.

77 FR 42465 - Special Local Regulations, Cruce a Nado Internacional, Ponce Harbor; Ponce, PR

Science.gov (United States)

2012-07-19

... effect on the human environment. This proposed rule involves special local regulations issued in.... Dated: June 7, 2012. D.W. Pearson, Captain, U.S. Coast Guard, Captain of the Port San Juan. [FR Doc...

A influência de palmares e parachute na coordenação dos nados

OpenAIRE

Thiago Telles

2012-01-01

Resumo: A natação é uma modalidade esportiva que, ao longo dos anos, sofreu modificações, atingindo um alto nível de exigência, o que é refletido nas sessões de treinamentos e nas pesquisas sobre a modalidade. Sendo assim, para otimizar o deslocamento nos nadadores pode-se otimizar a força propulsora. Para isso, pode-se utilizar palmares e parachute. Os palmares tem como função promover o aumento artificial da área da mão, desta maneira, aumenta-se a área frontal da mão do sujeito em contato ...

Samozvantsev nam ne nado, komandirom budu ja / Maksim Shmeljov, Aleksandr Tshaplõgin, Leivi Sher

Index Scriptorium Estoniae

Shmeljov, Maksim

2007-01-01

Kas Konstitutsioonipartei nimekirjas parlamendivalimistel kandideeriv Dmitri Linter ja tema kaaslased võivad kasutada liikumise Notshnoi dozor brändi ND omakasupüüdlikel eesmärkidel, küsivad autorid

FY1995 distributed control of man-machine cooperative multi agent systems; 1995 nendo ningen kyochogata multi agent kikai system no jiritsu seigyo

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

In the near future, distributed autonomous systems will be practical in many situations, e.g., interactive production systems, hazardous environments, nursing homes, and individual houses. The agents which consist of the distributed system must not give damages to human being and should be working economically. In this project man-machine cooperative multi agent systems are studied in many kind of respects, and basic design technology, basic control technique are developed by establishing fundamental theories and by constructing experimental systems. In this project theoretical and experimental studies are conducted in the following sub-projects: (1) Distributed cooperative control in multi agent type actuation systems (2) Control of non-holonomic systems (3) Man-machine Cooperative systems (4) Robot systems learning human skills (5) Robust force control of constrained systems In each sub-project cooperative nature between machine agent systems and human being, interference between artificial multi agents and environment and new function emergence in coordination of the multi agents and the environment, robust force control against for the environments, control methods for non-holonomic systems, robot systems which can mimic and learn human skills were studied. In each sub-project, some problems were hi-lighted and solutions for the problems have been given based on construction of experimental systems. (NEDO)

Present situation and the future task of pumps and motors for mobile application; Kensetsu kikai sharyoyo pump/motor no genjo to kadai

Energy Technology Data Exchange (ETDEWEB)

Ishii, S.

1994-09-15

The current technologies of hydraulic pumps and motors for construction machinery and vehicles are discussed. A bent axis type axial double piston pump for negative feedback control systems and a cam plate type double piston pump superior in responsibility for load sensing control systems are usually used for hydraulic shovels. A split flow type double piston pump is on the increase for mini-shovels, having an unsolved problem as pressure fluctuation. The use of piston pumps is increasing rapidly for cranes, and a cam plate type axial piston pump is mainly used for large cranes. A traveling motor integrated with a transmission gear is usually used for hydraulic shovels, and a swing motor with valves and a brake in its casing is also used. A bent axis type variable displacement motor combined with a transmission is on the increase for winches, and a reliable preventing system from drop of suspended loading is expected to be developed rapidly. HST for traveling is also diffusing into small construction machinery. 12 figs.

Fiscal 2000 achievement report. Research on machine tool not necessitating hydraulic system; 2000 nendo yuatsu resu kosaku kikai no kenkyu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

From the viewpoint that the manufacturing process, expendable items, and recycling should all be taken into consideration when machine tool energy consumption is the matter to discuss, it is concluded that the most important policy to follow in the effort to enhance energy conservation is to enable the tool to operate without hydraulic systems. For the realization of a general-purpose machine tool (lathe) to operate free of hydraulic systems, efforts are exerted to develop element technologies, tool rests, tail stocks, and chuck drives usable for the construction of a practical hydraulic system-free machine tool. In fiscal 2000, comprehensive evaluation of experimental machine tools continued, problems to solve for practical application were put together for the fabrication of improved units, and the improved units and an improved control method were integrated into a prototype of practical machine tools. The prototype was exhibited at Japan International Machine Tool Fair (JIMTOF) as a hydraulic system-free NC (numerically controlled) lathe Type LB300, and won a high valuation. The prototype was then tested for basic performance and for possibility of improvement, and problems to be solved before commercialization were isolated. (NEDO)

Achievement report for fiscal 1998 on business auxiliary to New Sunshine Program. Hot water-aided power generation plant development (Development of deep-seated geothermal resources exploitation technology and development of deep-seated geothermal resources excavating technology); 1998 nendo new sunshine keikaku hojo jigyo seika hokokusho. Nessui riyo hatsuden plant nado kaihatsu (shinbu chinetsu shigen saishu gijutsu no kaihatsu, shinbu chinetsu shigen kussaku gijutsu no kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

In the general exploitation scheme, technological information is collected about cement overseas, DHM (down hole motor), etc. In the development of heat-resistant durable bits, an improved version of the 350 degrees C real bit manufactured in fiscal 1997 undergoes a test in a real bore, and is evaluated for its general performance. In the development of high-temperature cement slurries, the ultralow specific gravity cement slurry for casing cement developed in fiscal 1997 is subjected to evaluation. It is examined by chemical analysis and powder X-ray diffraction, and its fluidity, free water, rate of dehydration, and compression strength at 250 degrees C are measured. In a real bore test, a slurry of the optimum composition is prepared and then hardened, and the hardened body is kept exposed to geothermal environments for eight weeks. It is then found that the hardened body retains a compression strength of 70kgf/cm{sup 2}. In the development of a down hole motor, a scale model, real in diameter and shortened in length, is built of the motor section, and is tested in circulating water and oil at normal and high temperatures, and its behavior and performance are evaluated. (NEDO)

High-level water purifying technology. Kodo josui shori gijutsu

Energy Technology Data Exchange (ETDEWEB)

Tsugura, H; Tsukiashi, K [Meidensha Corp., Tokyo (Japan)

1993-07-01

Research and development have been carried out on a high-level water purifying system using ozone and activated charcoals to supply drinking water free of carcinogenic matters and odors. This system comprises a system to utilize ozone by using silent discharge and oxygen enriching device, and a living organism/activated charcoal treatment system. The latter system utilizes living organisms deposited on activated charcoal surfaces to remove polluting substances including ammonia. The treatment experimenting equipment comprises an ozone generating system, an ozone treating column, an activated charcoal treating column, an ozone/activated charcoal control device, and a water amount and quality measuring system. An experiment was carried out using an experimental plant with a capacity of 20 m[sup 3]/day on water taken from the sedimentation process at an actual water purifying plant. As a result, trihalomethane formation potential was removed at about 40% in the ozone treatment, and at 70% in the whole treatment combining the ozone and living organism/activated charcoal treatments. For parameterization of palatability of water, a method is being studied that utilizes nuclear magnetic resonance to investigate degrees of water cluster. The method is regarded promising. 1 ref., 4 figs.

Technology for improving sludge concentration; Odei noshukusei kaizen gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-10

Sludge generating in a sewage treatment plant is disposed through the processes such as concentration, dehydration, and incineration in sludge disposal facilities. In recent years, there has been a trend that this sludge increases in volume as well as worsens in the concentration. A case is predictable where the sludge load to the dehydrating process is so large that the sludge can no longer be processed in sufficient quantity. In the meantime, if sludge is ozone-treated, viscous substance on the surface of sludge particles can be separated with a comparatively small amount of ozone, with sludge concentration enhanced. At Meidensha, an experimental plant was set up for the ozone treatment of sludge in a sludge intensive treatment plant of a metropolis, with a verification experiment carried out for a sludge concentration improving system by ozone. As a result of comparison of the treatment performance between an assessment system for performing ozone treatment and a reference system for not performing, the average value of the sludge concentration of a gravity concentration tank was 1.9% of the reference system against 1.7% of the assessment system in a continuous treatment experiment in the summer, while the solid collection ratio was 65.8% of the reference system against 95.5% of the assessment system, enabling a superior improving effect to be obtained. (NEDO)

Evaluation technology of clothing comfortableness; Ifuku tekigosei hyoka gijutsu

Energy Technology Data Exchange (ETDEWEB)

Niwaya, H.

1999-10-26

Modern apparel industries are required to supply many kinds of products corresponding to various needs of consumers. Among consumers' needs, comfortableness to wear such as size-fitness is primarily important. To facilitate apparel industries, it is expected to develop a new technology of pattern designing of comfortable garment and measuring garment pressure distribution. Our research is aimed at developing technology that uses computer simulation to predict and evaluate wear comfort, including size suitability, without the need to actually sew up a garment. First, we developed a basic system to predict wearing silhouette, garment pressure, and ease looseness of the garment. Using this system, we carried on the following study. The 3-dimensional distributions of the garment pressure and ease looseness were reversely mapped on the paper pattern in order to indicate the preferable modification. The system was extended for several poses, e.g. twist, bend. From various parameters, we examined the factors of garment pressure and ease looseness. In addition, we selected the parameters for the size-fit indicators and investigated size-fit evaluation indicators. (author)

Report on the FY 1999 survey on long-term energy technology strategy/basic survey for working out industrial technology strategy. Part 1. Technology strategy by field - material technology field (fine ceramics technology field); 1999 nendo choki energy gijutsu senryaku ni kansuru chosa. 1. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku (zairyo gijutsu bun'ya (fine ceramics gijutsu bun'ya)))

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The paper described the results of the survey of the fine ceramics technology field relating to the FY 1999 long-term energy technology strategy. The fine ceramics industry is a new industry for which the future development is expected. It has far-reaching effects on other industries. Japan has the advantage over other countries. As subjects to remarkably develop the industry, needed are the long-term basic preparation which promotes technology innovation such as the promotion of the fundamental/creative R and D, construction of an industry/university liaison system, and arrangement of the intellectual base. Preparation of the competitive environment and promotion of policies paying attention to the market are needed which make the development under the private control by creative study/corporate activities possible. Also important are the demonstration of leadership and secure international competitive force in the light of Japan's international position. For the private-control development, the role and course of various groups should be made clear from a long-term aspect. It is desirable that university/government will newly develop innovative technology, and industry will make the present technology force more developmental and competitive. Support from the nation is requested for researches large in scale. (NEDO)

Fiscal 1998 achievement report on regional consortium research and development project. Venture business fostering regional consortium in its 2nd year--Creation of key industries (Research and development of core technologies on the state-of-the-art machine tool); 1998 nendo chokako kikai no chukaku gijutsu no kenkyu kaihatsu seika hokokusho. 2

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Research and development is conducted to realize grindstone-aided ultra-precision machining by treating brittle materials in their ductile domains for use in the construction of parts for electric, optical, information-related, and magnetic equipment. In the development of ultra-precision machine tools, an experimental machine main body is complete, and it is proved that it performs as intended. In the development of an ultra-precision driving technology based on the principle of ultra-megnetostriction, an ultra-precision actuator is developed, which enables positioning with a resolution precision of about 1 angstrom under the load of a work shaft whose weight may range from 0kg to 1 ton. In the development of tool systems, tools are developed to enable ultra-precision machining that realizes a surface of nanometer-rule coarseness, and this achieves the target levels involving surface coarseness and flatness. As for technologies of working fluid circulation and filtration, a circulation and filtration unit is developed which excludes microscopic solid bodies completely, feeds a temperature-controlled working fluid to the grindstone and workpiece machining region, and filtrates the working fluid after use. (NEDO)

Fiscal 1997 report on the survey of verification of geothermal exploration technology, etc. 1. Development of the reservoir variation exploration method (development of the fracture hydraulic exploration method); 1997 nendo chinetsu tansa gijutsu nado kensho chosa. Choryuso hendo tansaho kaihatsu (danretsu suiri tansaho kaihatsu) hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The paper described the fiscal 1997 result of the fracture hydraulic exploration method as the variation exploration method of geothermal reservoirs. By elucidating hydraulic characteristics of the fracture system forming reservoir, technologies are established which are effective for the reservoir evaluation in early stages of development, maintenance of stable power after operational start-up, and extraction of peripheral reservoirs. As for the pressure transient test method, a test supporting system was basically designed to obtain high accuracy hydraulic parameters. As to the tiltmeter fracture monitoring method, a simulation was made for distribution of active fractures and evaluation of hydraulic constants without drilling wells. In relation to the two-phase flow measuring method, for stable steam production, the use of the orifice plate, the existing flow measuring method, etc. was forecast as a simple measuring method of the two-phase state of reservoir. Concerning the hydrophone VSP method, a feasibility study was made of the practical VSP for high temperature which can analyze hydraulic characteristics and geological structures around the well at the same time which the existing methods were unable to grasp, and brought the results. Moreover, to make high accuracy reservoir modeling possible, Doppler borehole televiewer was made in each reservoir. 80 refs., 147 figs., 22 tabs.

Fiscal 1999 research and verification of geothermal energy exploring technologies and the like. Development of reservoir mass and heat flow characterization (Electrical and electromagnetic monitoring technology - Summary); 1999 nendo chinetsu tansa gijutsu nado kensho chosa hokokusho (yoyaku). Choryuso hendo tansaho kaihatsu (denki denjiki tansaho kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Facilities for monitoring self-potential and resistivity are installed in the Ogiri district, Kagoshima Prefecture, where the Ogiri geothermal power plant is situated, and studies are made about relations between hot water production/reinjection and potential/resistivity at the power plant for the development of a high-performance numerical simulation system for the reservoir. The activities cover the development of (1) a self-potential monitoring system, (2) the development of a resistivity monitoring system, and (3) the development of a reservoir change prediction technique using self-potential and resistivity. Under item (1), eight self-potential monitoring stations are newly installed for the monitoring effort to continue now at a total of 50 stations. Potential has risen by 20 mV in two years since the drilling of a production replenishment well in February of 1999, with the domain of change in potential also expanding. Under item (2), the 3D MT (3-dimensional magnetotelluric) technique is used for resistivity profile investigation at 80 monitoring stations and preliminary monitoring tests are conducted to deliberate positions for resistivity monitoring. Under item (3), tracer tests are conducted for constructing a high-precision reservoir model for predicting changes in temperature, etc., attributable to the return of reinjected hot water, and a natural state reservoir simulation model is fabricated. (NEDO)

FY 1996 report on the results of the development of superconductor power application technology. Study of a total system, etc. (Investigational study of the introductory effect); 1996 nendo chodendo denryoku oyo gijutsu kaihatsu seika hokokusho. Total system nado no kenkyu (donyu koka no chosa kenkyu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

Under the secondary interim assessment made in FY 1995 between the assessment committee of the energy/environment technology development sectional meeting of the Industrial Technology Deliberation Council and NEDO, in this project, the following were conducted in FY 1996: study of trial manufacture of superconductor motor model machine and R and D of element technology (conductor technology/refrigerator technology). The study was proceeded mainly with Super-GM, and as to the motor, the preparation for test on a part of the model machines was finished. Considering FY 1998 which is the final year of this project, the investigational study in FY 1996 aims at accumulating/arranging/analyzing the data which help judge how to proceed with the future R and D of superconductor power application technology continuously based on the secondary interim assessment. For superconductor motor and various superconductor power appliance, economical/technical feasibilities and methods of R and D and surveys of trends in Japan and abroad for the R and D were made important items. Further, 'R and D of the basement of superconductor power application' proposed in the secondary interim assessment (R and D of the combination of elements which become the basement of equipment technology over a stage of parallel R and D of element technology of conductor, etc.) targeted the presentation of concrete details. (NEDO)

FY 2000 report on the results of the R and D of the technology for rationalization of energy utilization and for CO2 fixation using recycled paper; 2000 nendo energy shiyo gorika koshi nado yuko riyo nisanka tanso koteika gijutsu kenkyu kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

In this R and D, the recycled paper, etc. composed mainly of cellulose are degraded (saccharified) up to saccharides in a biological method. The saccharides and CO2 obtained are converted into useful substances such as organic acid using the bacterium function. The aim of the R and D is to develop this conversion (bioconversion) technology and to establish the technology to make an effective use of the recycled paper, etc. as useful chemical raw materials/substances and energy. In FY 2000, study was made mostly of the saccharification and bioconversion. As to the saccharification, conducted were the collection of the bacteria for cellulose degrading enzyme production which have been found so far and the evaluation of degradation of the recycled paper. And, as to the bioconversion, conducted were the survey and isolation of enzyme proteins and genes which are concerned in it in the process toward the formation to organic acid from saccharides and CO2, and the analysis of part of them. In this report, introductory remarks were described in Chapter 1. In Chapter 2, the results were summarized of the study on saccharification of the recycled paper. In Chapter 3, the results were outlined of the study on the bioconversion technology. This technology development was aimed at establishing new high efficiency bio-processes. (NEDO)

Fiscal 1999 research and verification of geothermal energy exploring technologies and the like. Development of reservoir mass and heat flow characterization (Development of gravity monitoring technology - Summary); 1999 nendo chinetsu tansa gijutsu nado kensho chosa hokokusho (yoyaku). Choryuso hendo tansaho kaihatsu (Juryoku tansaho kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

For developing a natural state simulation system to enable the seizure of reservoir characteristics from gravity changes, a gravity measuring network system is about to be constructed in the Nishiyama district, Yanaizu-machi, Kawanuma-gun, Fukushima Prefecture, where a geothermal power station is situated. The work centers about (1) the construction of a gravity measuring network system, (2) the development of a borehole gravimeter utilization technology, and (3) the development of analysis/evaluation technologies. Under item (1), 138 gravity measuring stations and 10 groundwater measuring stations are completed, and continuous and periodic measurements of gravity and groundwater levels are carried out. Furthermore, gravimeters are calibrated, and the elevation, latitude, and longitude are precisely determined for each of the measuring stations. Under item (2), model calculations are conducted for the Nishiyama district boreholes, as a step preparatory to borehole gravity measuring, by investigating the records of actual operation of equipment and by operating a reservoir simulation system. Under item (3), measures to deal with factors that impede precise measurement and conditions to meet for the analysis of gravity changes are studied, and efforts are started to construct the said natural state simulation system. (NEDO)

FY 1996 report on the results of the development of superconductor power application technology. Study of a total system, etc. (Investigational study of the introductory effect); 1996 nendo chodendo denryoku oyo gijutsu kaihatsu seika hokokusho. Total system nado no kenkyu (donyu koka no chosa kenkyu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

Under the secondary interim assessment made in FY 1995 between the assessment committee of the energy/environment technology development sectional meeting of the Industrial Technology Deliberation Council and NEDO, in this project, the following were conducted in FY 1996: study of trial manufacture of superconductor motor model machine and R and D of element technology (conductor technology/refrigerator technology). The study was proceeded mainly with Super-GM, and as to the motor, the preparation for test on a part of the model machines was finished. Considering FY 1998 which is the final year of this project, the investigational study in FY 1996 aims at accumulating/arranging/analyzing the data which help judge how to proceed with the future R and D of superconductor power application technology continuously based on the secondary interim assessment. For superconductor motor and various superconductor power appliance, economical/technical feasibilities and methods of R and D and surveys of trends in Japan and abroad for the R and D were made important items. Further, 'R and D of the basement of superconductor power application' proposed in the secondary interim assessment (R and D of the combination of elements which become the basement of equipment technology over a stage of parallel R and D of element technology of conductor, etc.) targeted the presentation of concrete details. (NEDO)

Fiscal 1999 research and verification of geothermal energy exploring technologies and the like. Development of reservoir mass and heat flow characterization (Development of seismic monitoring technology - Summary); 1999 nendo chinetsu tansa gijutsu nado kensho chosa hokokusho (yoyaku). Choryuso hendo tansaho kaihatsu (jishinha tansaho kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Development is under way of a reservoir mass and heat flow characterization method using seismic wave analysis. Specifics of the endeavor cover detailed studies of techniques for monitoring and analyzing seismic wave changes due to changes in the reservoir that accompanies production and reinjection of geothermal fluids, which are carried out through preliminary monitoring accomplished at the test field. For the construction of a microearthquake monitoring network, a monitoring network design is prepared, a data processing/analyzing system is improved and tested for serviceability, analysis programs for 3-dimensional velocity structure analysis technology are improved, and methods for analyzing changes in the reservoir are deliberated, all these based on the results of microearthquake preliminary monitoring and simulation carried out at the Akinomiya district, Akita Prefecture. For the research of elastic wave velocity structure change, short-duration reflection events and waveform changes due to geothermal power plant periodic inspections are extracted, and studies are conducted about the applicability of the diffraction stacking method to the exploration of geothermal energy. (NEDO)

Fiscal 1998 industrial science and technology R and D theme (University coordination type). Research report on R and D of technologies for creating new bioaffinity molecules using submicron beads; 1998 nendo biryushi riyogata seitai ketsugo busshitsu nado sosei gijutsu no kenkyu kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

This report summarizes the fiscal 1998 result on the entrusted research 'R and D of technologies for creating new bioaffinity molecules using submicron beads' based on 'Industrial science and technology R and D system.' As for development of technologies for analyzing chemical- biomolecule complexes using submicron affinity beads, for molecule design of DNA to be connected with cisplatin, telomere DNA was employed as a target DNA of cisplatin, and cisplatin-modified DNA (Pt-DNA) was synthesized. Reaction condition for Pt-DNA connected beads was established, and affinity beads with Pt-DNA were prepared. As for development of organic receptor refining technology, proteins bound to cisplatin-DNA were preliminarily analyzed, showing that the Pt-DNA is a proper target chemical substance. It is the first evidence that certain proteins recognize cisplatin-damaged telomere DNA. In addition, introduction of the equipment for developing analysis technology of binding domains, development of technology to create organic receptors with new functions, and general research on the titled technologies were carried out. (NEDO)

Survey report for fiscal 1999 on internationalization of technologies for effective use of energy resources. Survey of international trend of technology management (Survey of necessity of creating a strategic research organization for researches on technology, management, innovation, etc., for international competitiveness enhancement); 1999 nendo energy shigen yuko riyo gijutsu kenkyu kokusaika chosa kokusai gijutsu keiei doko chosa hokokusho. Kokusai kyoryoku kyoka wo mokuteki to suru 'gijutsu' 'keiei' 'innovation' nado no senryakuteki kenkyu kiko sosetsu no hitsuyosei ni kansuru chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Innovation plays an important role for Japan to flexibly utilize its achievements for the purpose of properly responding to new business environments and to secure competitiveness in the market. Japan lacks experts equipped with knowledge and ability as regards technology development and management which are necessary for the planning and creation of technologies, and is also short of institutes for raising experts. In America, technology management won an important position in the 1980s in the effort at industrial renovation, and the industry, government, and academia in a body endeavored to elevate the level steadily, continuously, and deliberately, to eventually provide a source of great propulsion and international competitiveness toward today's economic success. Investigations were conducted, and a proposition is made for the establishment of an international technology management research center. Such a center will study technology management and innovation through international exchange based mainly on the industrial circle and through the organic coordination of the industry, government, and academia for widely observing changes in international society for economic frontier cultivation. A practical training and intelligent network will be organized on the global scale, which will serve as an information transmitter. A skeleton of the plan is shown. (NEDO)

Fiscal 1996 comprehensive report on R and D on advanced chemical processing technology; 1996 nendo senshin kino soshutsu kako gijutsu no kenkyu kaihatsu sokatsu hokokusho. Kokoritsu hatsuden'yo buzai sosei gijutsu kaihatsu / sekiyu seisan system fushoku boshi gijutsu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

R and D was conducted on technology for composite thin film formation such as laser MOCVD, for thin film lamination, and for synthesis reaction and characterization in compounded fields where temperature/pressure/magnetic field/electrical field, etc., are compounded, for the purpose of creating materials with functions newly added or reinforced by regulating compositions and structures through atomic/molecular orders. The R and D was conducted on 24 themes, which were rearranged into four categories. Examples of the themes are as follows; development of super hard permanent magnets by crystallization process control of Nd-Fe-B amorphous alloys, as for structural control technology; research on high functional thin film sensors (PbLaTiO{sub 3}) using laser MOCVD, and research on ultra thin film by multi-ion-beam sputtering with ion/photo irradiation, as for thin film technology; R and D on highly ordered structure control technology in electrode surface compounded reaction fields, as for compounded fields; and, research on diagnostic technique for compounded reaction fields by laser-ionization method, as for supporting technologies. (NEDO)

`Joint Research and Development of Industrial Technology,` an international research collaboration for fiscal 1997. Utilization of 3D-woven C/C composite materials to machine components; 1997 nendo kokusai kenkyu kyoryoku jigyo `sangyo kiban gijutsu kyodo kenkyu kaihatsu`. Sanjigen ori C/C composite zairyo no kikai buhin eno oyo ni kansuru kenkyu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

A polygonal mirror in a printer and the main shaft of a high-speed milling machine are used as models for the development of technology for applying C/C (carbon/carbon) composite materials to machine components that are required to turn at high speeds. Various C/C composites are tested for flexural strength and thermal expansion for the designing and manufacturing of C/C composites for the polygonal mirror and main shaft. The first coating on the C/C composite is deposited by laser/plasma hybrid spraying, and is a Mo coating. A spraying robot is experimentally built for homogeneous coating. In the case of polygonal mirror, an Al coating is deposited further by the gas-deposition method. The polygonal mirror proves excellent in both dimension and reflectance, and attains the target speed of 45,000rpm. In the case of milling machine main shaft, however, it is not strong enough to withstand 40,000rpm although it is a success from a viewpoint of coating technology and manufacturing technology. 15 refs., 33 figs., 13 tabs.

FY 2000 Immediate-effect type project for research and development for international standards supporting information technology industries. Standardization of the machine monitoring technologies of the next generation for protecting safety of personnel; 2000 nendo joho sangyo shien sokkogata kokusai hyojun kaihatsu jigyo seika hokokusho. Hito no anzen wo mamoru jisedai kikai kanshi gijutsu no hyojunka

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

This project is aimed at establishing the international standards for the mechanical safety area. Described herein are the FY 2000 results of the developmental research on the machine monitoring devices of the next generation in which the image processing technologies are applied. The developed image sensors are the video camera and optical radar type sensor capable of scanning the three-dimensional space. The video camera functions self-confirmation that it is functioning without failure by the aid of the background reference pattern, and detects a person and machine when the pattern is hidden by them. The optical radar type sensor works to continuously confirm its performance by monitoring light reflected from the standard reflection body. The machine monitoring algorithms with the aid of the two-value images are also studied for e.g., judgment of stopping a machine by predicting that it will enter a closed space. The prototype monitor developed is subjected to various tests, including the tests of the individual device and assemblies in which it is incorporated, and the field tests in which it is incorporated in a machine in a commercial production line, to confirm that it can exhibit all of its required functions. (NEDO)

Report of the results of the fiscal 1997 regional consortium R and D project. Regional consortium field / R and D on downsizing technology of machine tools (first fiscal year); 1997 nendo chiiki consortium kenkyu kaihatsu jigyo. Chiiki consortium energy bun`ya / kosaku kikai no downsizing gijutsu ni kansuru kenkyu kaihatsu (daiichi nendo) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The R and D were conducted aiming at downsizing machine tools by combining microfactory technology owned by Mechanical Engineering Laboratory, Agency of Industrial Science and Technology of MITI with fundamental element technology owned by industrial groups of machine tools. In fiscal 1997, as to the study of spindle drum indexing mechanism in making main spindle multiaxial, the following have been finished: the basic study through openness of controller and networks, confirmation of function of the equipment acquired, and initialization of the driver software. Relating to the study on machining conditions of dry machining processing, delivery and installation of cold air machining instrument have been finished. Concerning the optical measurement of spindle radial run-out vectors, a system to make optical no contact measurement of radial direction components of rotation error was constructed with high accuracy pin gauge attached to the work spindle clamp mechanism as a medium. About the study on sensor-based state recognition technology, specifications for various kinds of sensor were decided on. 5 refs., 67 figs., 3 tabs.

Research report of FY 1997 on the industrial science and technology development. Technology development of super-metal (technology development of nano-amorphous structural control materials); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku seika hokokusho. Super metal no gijutsu kaihatsu (nano-amorphous kozo seigyo zairyo no gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Research and development of the innovative metals have been conducted, by which the weight reduction of members can be done by drastically improving the strength compared with conventional metals. For the high-rate cluster deposition and super plastic forming technologies, research and development of aluminum-based light-weight materials have been conducted, which provides excellent strength, toughness, and super plastic formability at room temperature. For the high-density energy utilization and control technology (amorphous-A), super-metals have been investigated as high dew point and corrosion resistance materials used for waste incinerators operated under the very severe conditions. These are expected to be applied to the apparatuses and equipment due to their excellent properties. For the controlled cooling technology (amorphous-B), super-metals with excellent soft magnetic characteristics and degree of shape freedom have been investigated for high performance and high efficiency devices including electric/electronic/communication devices, power transmission devices, and various industrial devices and parts. These are expected to contribute to the creation of new markets and the improvement of international competitive force. 123 refs., 160 figs., 33 tabs.

Research and development of utilization technology of solar thermal energy system for industrial and other use. Research and development of solar system (investigation of popular type snow melting systems); Sangyoyo nado solar system jitsuyoka gijutsu kaihatsu. Solar system no chosa kenkyu (fukyugata yusetsu system no kenkyu chosa)

Energy Technology Data Exchange (ETDEWEB)

Takita, M [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

1994-12-01

Described herein are the results of the FY1994 research program for investigation for popular type snow melting systems using solar energy. Two types of technologies are proposed to utilize solar energy for snow melting in winter and create comfortable environments. One is combined (active plus passive) type, which transfers solar heat it collects by the whole wall surfaces to an attic to heat it totally, and makes the whole roof as a radiator to melt snow. However, heat radiated from the roof is insufficient to melt all snow on the roof, allowing it to remain to an extent that it works as an insulator. The other is active type, which transfers heat it collects by the collector to the heat storage tank, from which heat is extracted in winter for various purposes, including snow melting. Such a system must store heat for an extended period, for which a highly insulating heat storage tank is proposed to balance capacity of heat storage between seasons and building size.

Fiscal 1999 research and verification of geothermal energy exploring technologies and the like. Development of reservoir mass and heat flow characterization (Development of fracture hydrological properties characterization technology - Summary); 1999 nendo chinetsu tansa gijutsu nado kensho chosa hokokusho (yoyaku). Choryuso hendo tansaho kaihatsu (danretsu suiri tansaho kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Efforts are under way to develop reservoir change evaluation technologies to be effective in evaluating reservoirs at their initial stage of development, in stabilizing the output of power stations after their commencement of service operation, and in probing into reservoirs in already-developed areas. One of them concerns the characterization of the hydrological properties of fractures. The development efforts involve (1) a pressure transient test method (measurement of the response of reservoirs to changes in borehole internal pressure), (2) a tiltmeter observation method (ground surface deformation measurement), and (3) a 2-phase flow metering method (metering of spurting fluids). Under item (1), a computer-aided borehole hydrology test system is built and field-tested to isolate problems. Also, a pressure transient test system is built by way of trial by use of which compressor-aided control is performed over air pressure in the borehole. Under item (2), it is made clear that changes, several MPa in scale, in the pressure in a borehole is detected by simulation and that a sufficiently capable system is realized using a tiltmeter available on the market. Under item (3), a device is fabricated which is a combination of a laser flowmeter and a void fraction meter, and a field test is conducted to assess its feasibility and to identify problems. (NEDO)

Achievement report for fiscal 1997 on joint research to develop fuel cell technologies for urban energy centers. Research on evaluating life of phosphoric acid fuel cells; 1997 nendo toshi energy center nado nenryo denchi gijutsu kaihatsu kyodo kenkyu seika hokokusho. Rinsangata nenryo denchi jumyo hyoka kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-05-01

This paper discusses life evaluation on phosphoric acid fuel cells of urban energy center type for regional energy supply and on-site type to be installed in buildings. Operation characteristics tests and disassembly checks allow to identify factors for voltage decrease, and estimate the life therefrom particularly if the voltage decrease is caused from catalyst activity. The time before 10% decrease value is reached is now about 40,000 hours. The creep analysis method that has been developed recently can predict deformation in full-size reformers nearly exactly, and is effective in operating the reformer and evaluating the life at the design stage. Creep buckling is the critical value, which is caused by ecliptic deformation of internal tubes in the second catalyst layer. In a heat exchanger for fuel gas preheating, carbon in the reformed gas is carbonized and deposited due to catalytic action of nickel in the brazing material that bonds plates and fins in the heat exchanger. Iron also has a possibility of performing catalytic action. In the on-site type 1,000-kW class fuel cells, no structural problems have been presented even after the operation has been stopped. In order to extend time interval between phosphoric acid supply into the cells, it is necessary to reduce difference in the remaining phosphoric acid amounts in the stack lamination direction and in the cell flat surface. (NEDO)

Basic investigation on promotion of joint implementation in fiscal 2000. Investigations on development of technology to utilize heat of deep earth pressure type hot water in Hungary; 2000 nendo kyodo jisshi nado suishin kiso chosa hokokusho. Hungary koku shinso chiatsugata onsui no netsuriyo gijutsu kaihatsu chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Investigations and discussions were given on a project to implement district heating, greenhouse heating, and binary power generation by utilizing geothermal resources in Hungary. Hungary has deep earth pressure type hot water areas distributed, that flow hot water of about 90 to 180 degrees C by the bed pressure. The areas that can utilize the hot water were extracted and investigated by using literatures and data. The project plans district heating of about 15,000 households using the geothermal water, heating of greenhouses equivalent to 100,000 m{sup 2}, gas engine power generation by using the flowing fluid pressure and combustion of the generated methane gas, and binary power generation by using the geothermal water. As a result of the discussions, it was revealed that the energy saving effect would save 5,008 Ktoe in 20 years as converted to crude oil, and the greenhouse effect gas reducing effect would reduce 14.2 million t-CO2 in 20 years. The total project cost would be about 16.62 billion yen. The internal profit rate of this project is 11.34%, largely exceeding the opportunity cost, and indicating the financial effect possibility. (NEDO)

Fiscal 1998 research report. Survey on the evaluation and factor of the competitive power of industrial technologies in various fields including an electronic field; 1998 nendo chosa hokokusho.Denshi kanren nado wo hajime to suru sangyo gijutsu kyosoryoku no hyoka to yoin ni kansuru chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Survey was made to evaluate the Japanese competitive power of industrial technologies, and analyze inhibitors from its development by extracting some issues for improvement. Questionnaire survey was made for learned persons based on the framework on evaluation of the Japanese technical level. The current Japanese level of each technology was evaluated generally comparing it with that of overseas countries to acquire its strong and weak points. Based on the hearing for learned persons, the industrial competitive power was evaluated freely from technology, and issues of every industry were also extracted. Problems existed in not only a technical level but also an undertaking process, and based on these problems, the competitive powers of every industry were classified. Previous proposals on the competitive power were analyzed based on literature survey to arrange some policies to approach. Possible inhibitors were arranged showing the policy reinforcing the industrial competitive power. Problems on educational system, business management, social infrastructure, and technology diffusion system were extracted. (NEDO)

Achievement report for fiscal 1999 on research and development of technologies for medical welfare equipment. Surgery support system for brain tumors and other conditions (Rationalization for energy profit); 1999 nendo iryo fukushi kiki gijutsu kenkyu kaihatsu seika hokokusho. Noshuyo nado shujutsu shien system (energy shiyo gorika)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-05-01

In the second phase of experimental micro-manipulator fabrication, insertion parts equipped with three manipulators and operation input units are built and evaluated. The system comprises three input units and a console with a built-in controller etc., and the console is checked for shape and operability. A high resolution and high brightness stereoscopic viewer is developed for clinical use by surgical operators, and is examined for practicality. The positioning system for the intraoperative vision instrument are improved relative to its attachment method, accuracy, and sterilization tolerance. The result is evaluated, and then further improvement is made. Some functions are added to the surgical planning software program. Software programs are constructed for the real-time control and operation of the viewing system. For the micro-manipulator system to serve as a total system, the forceps are extended, tips are developed for the suction device and incision device, and their functions as members of the system are evaluated. (NEDO)

FY 1999 report on the results of the R and D of the global environmental industry technology. R and D of the CO2 fixation/effective use technology using bacteria/algae; 1999 nendo saikin sorui nado riyo nisanka tanso koteika yuko riyo gijutsu kenkyu kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

For the purpose of developing the technology to fix CO2 and recycle it as resource in higher efficiency than that in photosynthesis in the nature world, study of bacteria, etc. was made in terms of the search, breeding, and artificial realization of the growth environment, etc. The FY 1999 results were summed up. As to high efficiency photosynthetic bacteria/microalgae, conditions for sampling/breeding/optimum culture of bacteria were established and made database. From conditions for the optimum CO2 fixation by photosynthetic bacteria, oxygen injury prevention culture method, continuous culture experiment, etc., it was found out that the carbyne cycle was a main route of the carbon fixation also in photosynthetic bacteria. As to the cell fusion, established were the technology of electric fusion of interspecific fusion strains and the technology of evaluation of growth characteristics. Also studied was a method to transfect genes into Chlorella sp. which fixes CO2. Concerning the light collecting reactor of 200L scale, a high concentration culture experiment was carried out using Chlorella sp. UK001 as the strain tested, and the engineering data on the behavior in culture tank, multiplication speed, etc. were collected. (NEDO)

FY 1998 report on the verification survey of geothermal survey technology, etc./Development of the reservoir fluctuation survey method (Summary). Theme 2. Development of the gravity survey method; 1998 nendo chinetsu tansa gijutsu nado kensho chosa choryuso hendo tansaho kaihatsu hokokusho (yoyaku). 2. Juryoku tansaho kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

As to the construction of a network system for gravity measurement, the continued observation of groundwater level was carried out as a 24-hour observation by setting water-level gauges at 10 wells. At one of the wells (No. 5), the 24-hour continued measurement was conducted for gravity as well as groundwater level. At the 9 wells except No. 5 well, the traveling measurement of gravity was made. In relation to the gravity measurement, the periodic measurement of three times a year was conducted at 138 measuring points. And at the same time, the elevation at measuring point was asked by a combination of GPS measuring and level measuring. Concerning the borehole gravity meter, the existing gravity calculation program was revised, and the model calculation of borehole gravity values was made. In the analysis/evaluation, as to the gravity fluctuation analysis, relations were studied between the groundwater level fluctuation and gravity fluctuation. Also conducted were study of effects of the unsaturated zone density fluctuation on gravity and selection of a measuring method of the soil water content saturation degree. In regard to the study of the precise gravity measuring method, the vertical gravity gradient was measured, and the correction method was studied. Further, the development was made of tidal models which are adaptable to the Yanaizu-Nishiyama area. (NEDO)

FY 2000 report on the results of the technology development of energy use reduced machine tools, etc. R and D of the environment-friendly grinding machine system; 2000 nendo energy shiyo gorika kosaku kiki nado gijutsu kaihatsu seika hokokusho. Kankyo taiogata kensaku kako system no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

The R and D were conducted of a grinding machine system of an environmental-friendly type in which no coolant is used or the amount of coolant is reduced, and the FY 2000 results were summed up. As to the ECOLOG grinding newly thought up, the roles were divided: the lubrication into a trace of the vegetable oil supplied onto the grindstone surface, cooling into a trace of the cooling water supplied to the structure, discharge of chips to the cooling water for bed table cleaning. By this, the amount of the cooling water becomes approximately 1/3 of that in the conventional grinding. Concerning the ECOLOG grinding using the usual grindstone, the grinding performance equal to that in the conventional grinding was confirmed. In the study for making the cooling water non-pollutant, the chlorine/sulfur free coolant was developed which includes no chemical substances designated by the PRTR law at all. It was confirmed that the grinding performance was almost the same level as the existing coolant which includes sulfur. In the study of the supply of coolant applied with ultrasonic waves, the result was obtained that in the optical glass grinding, the number of scratches decreased and the surface roughness improved even at the flow rate of coolant which is less than in the conventional grinding. (NEDO)

Photon technology. Laser processing technology; Photon technology. Laser process gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

Survey has been conducted to develop laser processing technology utilizing the interaction between substance and photon. This is a part of the leading research on photon technology development. The photon technology development is aimed at novel technology development highly utilizing the quantum nature of photons. In the field of laser processing, high quality photons are used as tools, special functions of atoms and molecules will be discovered, and processing for functional fabrication (photon machining) will be established. A role of laser processing in industries has become significant, which is currently spreading not only into cutting and welding of materials and scalpels but also into such a special field as ultrafine processing of materials. The spreading is sometimes obstructed due to the difficulty of procurement of suitable machines and materials, and the increase of cost. The purpose of this study is to develop the optimal laser technology, to elucidate the interaction between substance and photon, and to develop the laser system and the transmission and regulation systems which realize the optimal conditions. 387 refs., 115 figs., 25 tabs.

Photon technology. Laser process technology; Photon technology. Laser process gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

For developing laser process technology by interaction between substance and photon, the present state, system, R and D issues and proposal of such technology were summarized. Development of the photon technology aims at the modification of bonding conditions of substances by quantum energy of photon, and the new process technology for generating ultra- high temperature and pressure fields by concentrating photon on a minute region. Photon technology contributes to not only the conventional mechanical and thermal forming and removal machining but also function added machining (photon machining) in quantum level and new machining technology ranging from macro- to micro-machining, creating a new industrial field. This technology extends various fields from the basis of physics and chemistry to new bonding technology. Development of a compact high-quality high-power high-efficiency photon source, and advanced photon transmission technology are necessary. The basic explication of an unsolved physicochemical phenomenon related to photon and substance, and development of related application technologies are essential. 328 refs., 147 figs., 13 tabs.

Practical applications of superconducting technology; Chodendo gijutsu to sono oyo

Energy Technology Data Exchange (ETDEWEB)

Hoshino, M.; Yamamoto, K.; Urata, M. [Toshiba Corp., Tokyo (Japan)

1995-11-01

Remarkable progress has been made in superconducting technology recently. This paper describes the details and technical features of every cooling type of practical superconducting magnet (SCM), including the SCM for magnetic resonance imaging (MRI), SCM for semiconductor pulling devices, high-field SCM, SCM for magnetically confined plasma devices, and SCM for particle detectors. Commercial production of pool-boil-cooled SCMs has been realized by reducing helium evaporation and decreasing the frequency of helium pouring. The development of forced-cooled SCMs has made it possible to build large SCMs. Moreover, the development of the 4 K-GM refrigerator has enabled liquid-helium-free SCMs to be introduced. Since this type of SCM can be operated merely by turning on a switch, SCMs are expected to come into more widespread use. 7 refs., 1 fig.

Photon technology. Hard photon technology; Photon technology. Hard photon gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

For the application of photon to industrial technologies, in particular, a hard photon technology was surveyed which uses photon beams of 0.1-200nm in wavelength. Its features such as selective atom reaction, dense inner shell excitation and spacial high resolution by quantum energy are expected to provide innovative techniques for various field such as fine machining, material synthesis and advanced inspection technology. This wavelength region has been hardly utilized for industrial fields because of poor development of suitable photon sources and optical devices. The developmental meaning, usable time and issue of a hard photon reduction lithography were surveyed as lithography in ultra-fine region below 0.1{mu}m. On hard photon analysis/evaluation technology, the industrial use of analysis, measurement and evaluation technologies by micro-beam was viewed, and optimum photon sources and optical systems were surveyed. Prediction of surface and surface layer modification by inner shell excitation, the future trend of this process and development of a vacuum ultraviolet light source were also surveyed. 383 refs., 153 figs., 17 tabs.

Photon technology. Hard photon technology; Photon technology. Hard photon gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

Research results of hard photon technology have been summarized as a part of novel technology development highly utilizing the quantum nature of photon. Hard photon technology refers to photon beam technologies which use photon in the 0.1 to 200 nm wavelength region. Hard photon has not been used in industry due to the lack of suitable photon sources and optical devices. However, hard photon in this wavelength region is expected to bring about innovations in such areas as ultrafine processing and material synthesis due to its atom selective reaction, inner shell excitation reaction, and spatially high resolution. Then, technological themes and possibility have been surveyed. Although there are principle proposes and their verification of individual technologies for the technologies of hard photon generation, regulation and utilization, they are still far from the practical applications. For the photon source technology, the laser diode pumped driver laser technology, laser plasma photon source technology, synchrotron radiation photon source technology, and vacuum ultraviolet photon source technology are presented. For the optical device technology, the multi-layer film technology for beam mirrors and the non-spherical lens processing technology are introduced. Also are described the reduction lithography technology, hard photon excitation process, and methods of analysis and measurement. 430 refs., 165 figs., 23 tabs.

Winter concrete; Kanchu kunkurito. Gijutsu no genjo to shorai tenbo

Energy Technology Data Exchange (ETDEWEB)

Kamata, Eiji [Hokkaido University, Hokkaido (Japan)

1998-11-10

Much energy is consumed in order to carry out the winter concrete, and it becomes not always the work in the work environment of the amenity. Therefore, it wants to avoid it, if such work is possible. The winter concrete is a basis in carrying out the construction in cold region in all year. Large role is very much fulfilled for efficient operation of the construction industry in which foot of maintain is wide, activation of the regional economy of snows cold region such as the constant employment of construction worker, improvement in the social environment. Therefore, the popularization of the winter concrete technology is indispensable in the chilly snowy area, and it becomes the importance that the efficiency improvement is attempted. (NEDO)

Expectation of rapid prototyping; Rapiddo/puroto taipingu gijutsu no tenbo

Energy Technology Data Exchange (ETDEWEB)

Kishinami, T. [Hokkaido Univ., Sapporo (Japan). Faculty of Engineering

1997-04-05

Prototyping can be defined as the physical and imaginable product model formation process used for verification of production guideline of functional component. Rapid prototyping means the combination of technology forming directly the physical model from CAD data. It is a summarization of technology composed of design assistant technology, model production technology, and integration technology. In 1980`s, 3D System Corp. proposed the stereo lithography. Since then its research and development were promptly carried out as for the technology of rapid formation o physical model. Resultantly, it became possible to fabricate the model designed by the three dimensional CAD within a day using a rapid prototyping system. This can be roughly divided into the following three: (1) stereo lithography, (2) method of melting and hardening by laser irradiation of the powder plastic and wax, (3) 3D-printing method consisting of selectively coating of ceramic powder with binder. 4 refs., 3 figs.

Automotive technology. ; Chassis. Jidosha gijutsu. ; Chassister dot sharyo seigyo sochi

Energy Technology Data Exchange (ETDEWEB)

Ota, K.; Mor, H.; Ishizeki, S. (Fuji Heavy Industries Ltd., Tokyo (Japan))

1990-07-01

According to the trend of car suspensions announced in 1989, not only sports cars but also sedans have extensively applied a multi-link type and a double-wishbone type which are to improve operation stability and comfortableness by reexamining all their fundamental structures. Active suspensions with electronic control have been put to practical use and adopted for the first time to mass-produced cars such as INFINITI'' and CELICA''. Concerning steerings, most types of light cars are now equipped with power steerings. Moreover, application of air bags has increased, and safety has been improved by commercialization of the first mechanical air bags in addition to the conventional electrical ones. As for brakes, more anti-lock brakes have been used for 4WD cars and low-displacement cars. Motorcars with a traction control system have consequently increased. Thus both the anti-lock brakes and the traction control system are contributing to the improvement in safety. 17 figs., 2 tabs.

Technique of CWM distribution system; CWM ryutsu chukei system gijutsu

Energy Technology Data Exchange (ETDEWEB)

Konno, K [Center for Coal Utilization, Japan, Tokyo (Japan); Tanaka, M

1996-09-01

It may be intended that CWM is manufactured in areas near coal producing areas in overseas countries and imported as a product requiring lower handling cost than in bulk products. In order to achieve this idea, it is necessary to establish a distribution and relaying system for product transportation inside and outside the country, including relaying bases for receiving, loading and storing the product. This paper reports results of the demonstration tests performed since 1992 to 1996. In the tests, CWM made from Chinese coals was transported from Shijiu Port to the Hibiki relaying base in the city of Kita-Kyushu on 5000 DWT ocean vessels, unloaded, stored, and loaded again on 700 DWT domestic vessels for distribution to users. Since the inauguration of transportations, 40,000 tons of CWM were delivered yearly to the Okayama plant of Tayca Company, and about 20,000 tons to the Mizushima power plant of the Chubu Electric Power Company over a period from 1995 to 1996. During the period, a number of findings were acquired in different aspects, including quality control of incoming and outgoing CWM, stability in quantity and properties, loading and unloading works, and transportation. Although reduction in subsidence during transportation and storage was indicated desirable, the practical applicability was verified for the relaying system as a whole. 4 refs., 15 figs., 3 tabs.

Laser innovated manufacturing technology; Laser ga seisan gijutsu wo kakushinshita

Energy Technology Data Exchange (ETDEWEB)

Maruyama, I. [Honda Motor Co. Ltd., Tokyo (Japan)

1996-11-01

This paper looks back the history of applications of laser processing in the automobile industry, and introduces contents of some particularly unique applications from among them. The CO2 laser and YAG laser that are used mainly have increased their outputs with the times, and 50-kW CO2 laser and 4-kW YAG laser have now become available commercially. The laser processing has become used widely for cutting purpose in Japan, which is in contrast with their high application to welding in Europe and America. Cutting thick plates has been developed recently, which is applicable to plates as thick as about 25 mm. A flexible system in which YAG laser is combined with an optical fiber/articulated robot is operating for three-dimensional shape processing. Automobile makers are adopting laser processing for welding in place of the electron beam welding that has been used conventionally. The process is used also for a number of other applications including surface reformation, such as surface quenching for cylinder liner, and valve seat padding. 8 refs., 8 figs.

Report on a survey in fiscal 1999. Supplementary survey on research and development of carbon dioxide fixation and effective utilization technologies utilizing bacteria and algae (the survey on feasibility of bio-technologies to create economic effects, such as the biological CO2 fixation technology); 1999 nendo saikin sorui nado riyo nisanka tanso koteika yuko riyo gijutsu kenkyu kaihatsu futai chosa. Keizaiteki koka wo soshutsusuru seibutsuteki CO{sub 2} koteigijutsu nado no biotechnology no kanosei chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Bio-technologies including the biological CO2 fixation technology, or the green bio-technologies (GBT) are the technologies indispensable in realizing the change to a resource circulating and environment harmonizing society that accompanies economical growth, or in other words, the 'sustainable development'. In quantifying the feasibility of these technologies, the GBTs that contribute to creating Japan's international competitive power and employment were specified, and an approach to establish the realization target in 2010 was adopted, upon identifying the general condition of the related markets inside and outside the country. The GBT is the technology that makes the best use of Japan's independent strength created by combining the enzyme engineering and fermentation engineering with the 'genome science' (HEART). The targets are to substitute four million kiloliters of petroleum with a resource circulation type energy generated by the bio-technology; apply the bio-technology to about 30% of products and processes produced or used in Japan's chemical industries; and aim at creating markets by using environmental measurement and analysis, treatment of hard-to-decompose substances, and supports on tree planting as the three pillars. A simulation on return on investment in GBT business suggests the effect of promoting PFI. (NEDO)

Report on a survey in fiscal 1999. Supplementary survey on research and development of carbon dioxide fixation and effective utilization technologies utilizing bacteria and algae (the survey on feasibility of bio-technologies to create economic effects, such as the biological CO2 fixation technology); 1999 nendo saikin sorui nado riyo nisanka tanso koteika yuko riyo gijutsu kenkyu kaihatsu futai chosa. Keizaiteki koka wo soshutsusuru seibutsuteki CO{sub 2} koteigijutsu nado no biotechnology no kanosei chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Bio-technologies including the biological CO2 fixation technology, or the green bio-technologies (GBT) are the technologies indispensable in realizing the change to a resource circulating and environment harmonizing society that accompanies economical growth, or in other words, the 'sustainable development'. In quantifying the feasibility of these technologies, the GBTs that contribute to creating Japan's international competitive power and employment were specified, and an approach to establish the realization target in 2010 was adopted, upon identifying the general condition of the related markets inside and outside the country. The GBT is the technology that makes the best use of Japan's independent strength created by combining the enzyme engineering and fermentation engineering with the 'genome science' (HEART). The targets are to substitute four million kiloliters of petroleum with a resource circulation type energy generated by the bio-technology; apply the bio-technology to about 30% of products and processes produced or used in Japan's chemical industries; and aim at creating markets by using environmental measurement and analysis, treatment of hard-to-decompose substances, and supports on tree planting as the three pillars. A simulation on return on investment in GBT business suggests the effect of promoting PFI. (NEDO)

Fiscal 2000 survey report. Survey of long-term energy technology strategy and the like (Survey of natural gas technology trend); 2000 nendo choki energy gijutsu senryaku nadoni kansuru chosa hokokusho. Choki energy gijutsu senryaku chosa (tennen gas gijutsu doko chosa)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

In search of new technical tasks involving the supply, transportation, and utilization of natural gas, a survey is conducted of the trend of natural gas supply and demand, trend of development of related technologies, and their impact on the market. After natural gas matters are outlined and definition and classification are established, investigations are conducted into natural gas production and the trend of new natural gas consuming countries supposedly to affect the natural gas supply and demand situation. Taken up as relevant technologies are cogeneration, natural gas powered automobiles, fuel cells, GTL (gas to liquid) technology, and micro gas turbines. These technologies are examined from the viewpoints of environmentally-friendliness and energy conservation feature, and then tasks to discharge are proposed in the fields of technology development, operation, and fuel. For natural gas powered automobiles, vehicular performance improvement and the conformability and standardization of high-pressure parts and components are taken up in the field of technology development, and the introduction and augmentation of quick fillers for natural gas and increase in the number of natural gas supply stations are taken up in the field of operation. Concerning fuel cells, in the field of fuels to be fed to the same, technologies of hydrogen storage and of refining and reforming of oil based fuels are taken up. (NEDO)

Fiscal 1996 comprehensive report on R and D on advanced chemical processing technology; 1996 nendo senshin kino soshutsu kako gijutsu no kenkyu kaihatsu sokatsu hokokusho. Kokoritsu hatsuden'yo buzai sosei gijutsu kaihatsu / sekiyu seisan system fushoku boshi gijutsu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

R and D was conducted on technology for composite thin film formation such as laser MOCVD, for thin film lamination, and for synthesis reaction and characterization in compounded fields where temperature/pressure/magnetic field/electrical field, etc., are compounded, for the purpose of creating materials with functions newly added or reinforced by regulating compositions and structures through atomic/molecular orders. The R and D was conducted on 24 themes, which were rearranged into four categories. Examples of the themes are as follows; development of super hard permanent magnets by crystallization process control of Nd-Fe-B amorphous alloys, as for structural control technology; research on high functional thin film sensors (PbLaTiO{sub 3}) using laser MOCVD, and research on ultra thin film by multi-ion-beam sputtering with ion/photo irradiation, as for thin film technology; R and D on highly ordered structure control technology in electrode surface compounded reaction fields, as for compounded fields; and, research on diagnostic technique for compounded reaction fields by laser-ionization method, as for supporting technologies. (NEDO)

Fiscal 1996 report on the results of the subsidy operation under the Sunshine Project on the development of a geothermal water use power plant, etc. Development of the deep geothermal resource collecting technology (development of the deep geothermal resource producing technology); 1996 nendo New Sunshine keikaku hojo jigyo seika hokokusho. Nessui riyo hatsuden plant nado kaihatsu (shinbu chinetsu shigen saishu gijutsu no kaihatsu / shinbu chinetsu shigen seisan gijutsu no kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

The paper reported the results of the fiscal 1996 R and D of the deep geothermal resource collecting/producing technology. In the design of the total development, characteristics of the well mouth of the deep reservoir were examined to evaluate properties of deep geothermal resource, and the necessity of the pressure design, etc. were clarified. As to PTSD logging technology, conducted were improvement of PT probe, manufacture of a sonde of which S probe was integrated with memory/battery modules, and the actual well experiment. Concerning PTC monitoring technology, an experiment was carried out on a high temperature use optical fiber GI type, and it was shown that the type was on a commercial level. Further, a prototype sampler with 300degC heat resistance was trially manufactured, and a test to confirm its work was conducted in the well in the Corn Wall area of the U.K. As to the production control technology, studied was the arrangement of the production control technology for deep geothermal resource. Moreover, an experiment was made to examine the effect of metal ions coexisting when silica in the deep fluid precipitates. 46 refs., 107 figs., 38 tabs.

Fiscal 1996 report on the results of the subsidy operation under the Sunshine Project on the development of a geothermal water use power plant, etc. Development of the deep geothermal resource collecting technology (development of the deep geothermal resource drilling technology); 1996 nendo New Sunshine keikaku hojo jigyo seika hokokusho. Nessui riyo hatsuden plant nado kaihatsu (shinbu chinetsu shigen saishu gijutsu no kaihatsu / shinbu chinetsu shigen kussaku gijutsu no kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

The paper reported the results of the fiscal 1996 R and D on the development of deep geothermal resource collecting/drilling technology. In the design of a total development, the planned adjustment of actual well tests was conducted on bits and drilling mud at the time of drilling the exploration well of the Kakkonda area. As to the trend of overseas technology, examined was the developmental trend of high temperature type downhole motor products. In the development of hard high temperature strata drilling element technology, a drilling test was carried out on trially manufactured 300degC heat resistant/durable bits. In the development of high temperature drilling mud, drilling was done in the mud of thermally stable quality in the actual well experiment using the 300degC mud system. In the development of high temperature use cement and high temperature use cement slurry, a possibility was obtained of composing a slurry which has the targeted dewatering amount, compressive strength, and water permeability. In the development of high temperature downhole motor, data on characteristics of heat resistant stator materials were arranged in a relationship among the abrasion amount, thermal expansion amount and elastic recovery amount, and the database was obtained. 166 figs., 148 tabs.

Fiscal 1995 report on the results of the subsidy operation under the Sunshine Project on the development of a geothermal water use power plant, etc. Development of the deep geothermal resource collecting technology (development of the deep geothermal resource drilling technology); 1995 nendo New Sunshine keikaku hojo jigyo seika hokokusho. Nessui riyo hatsuden plant nado kaihatsu (shinbu chinetsu shigen saishu gijutsu no kaihatsu / shinbu chinetsu shigen kussaku gijutsu no kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

The paper reported the results of the fiscal 1995 R and D on the development of deep geothermal resource collecting/drilling technology. In the design of a total development, the trend of technical development was examined of bits, cement and DHM overseas. Further, the simulational prediction was conducted in deep geothermal drilling. As to the development of element technology of hard high temperature strata drilling, the R and D of seal mechanism, bearing mechanism and cutter mechanism were carried out aiming at developing heat resistant/durable bits, and a bit was trially manufactured which was integrated with element parts selected by each element technology. Concerning the development of high temperature drilling mud, studies were made of the development of drilling mud materials, a mud system, etc. Relating to the development of high temperature cement slurry, the development was conducted of high temperature cement, dewatering adjusting agents, etc. As to the development of high accuracy much inclination drilling technology, in the development of high temperature use downhole motor, tests on heat resistance/durability were carried out in the mud of 12 kinds of high heat resistant stator materials. 175 figs., 137 tabs.

FY 1998 annual report on the preliminary research and development of techniques for developing resources from gas-hydrate. Studies on gas-hydrate exploration, excavation techniques, methods for assessing environmental impacts, and gas hydrate handling systems; 1998 nendo gas hydrate shigenka gijutsu sendoken kaihatsu seika hokokusho. Tansanado ni kansuru kenkyu kaihatsu, kussaku gijutsu nado ni kansuru kenkyu kaihatsu, kankyo eikyo hyokaho no kenkyu kaihatsu, riyo system ni kansuru chosa kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

This R and D project is for the preliminary studies on development of the following 4 types of techniques for developing resources from gas-hydrates (GH): (1) gas-hydrate exploration, (2) excavation techniques, (3) methods for assessing environmental impacts, and (4) gas hydrate handling systems. The FY 1988 R and D results are described. For gas-hydrate exploration, the methods for analyzing inorganic ions and trace quantities of elements, which are necessary for accurately estimating the offshore GH around Japan, are established; and case studies are conducted for methods of predicting GH deposit forming mechanisms, and stability fields of GH, based on terrestrial heat flow and seismic data. For excavation techniques, GH decomposition rate is analyzed using a laboratory system which reproduces conditions of excavation of GH layers. For methods for assessing environmental impacts, a geo-hazard predicting model is established, to study ground displacement and gas leakage sensing systems and data transmission systems to cope with the hazards. For gas hydrate handling systems, an overall system is studied, and storage and transportation systems are outlined. (NEDO)

Fiscal 1997 report on the R and D result of industrial science and technology. R and D on super metal (R and D on innovative raw metal materials); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku seika hokokusho. Super metal no gijutsu kaihatsu (kakushinteki kinzoku sokei zairyo no gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Study was made on the applicability of mechanical milling (MM) and mechanical alloying (MA) to Fe system alloys. Metastable austenitic stainless steels such as SUS316L and SUS304L form {alpha} phases by strain induced transformation due to MM, and are subjected to further plastic deformation. Nano-size fine structure was obtained through inverse transformation into austenite({gamma}) by heat treatment or high-temperature sintering of MM powder. Fine microduplex structure of 620nm in average crystal grain size was obtained for SUS316L. This material showed nearly 3.3 times higher 0.2% tensile proof stress, nearly 1.8 times higher tensile strength, and 35% higher elongation than conventional ingot steels. Solid solution powder of 12Cr-Mo-W ferritic steel was sintered by hot isostatic pressing (HIP) under low- temperature and ultrahigh-pressure conditions of 650degC and 588MPa. The as-HIP`ed sample and sample annealed at 800degC showed average {alpha} grain sizes of 33 and 50nm, respectively, and a strength twice as high as that of 12Cr steel. 97 refs., 60 figs., 18 tabs.

Efeitos antidepressivos da duloxetina e da fluoxetina no teste do nado forçado em ratos

OpenAIRE

Ciulla, Leandro; Menezes, Honório Sampaio; Bueno, Bárbara Beatriz Moreira; Schuh, Alexandre; Alves, Rafael José Vargas; Abegg, Milena Pacheco

2007-01-01

PURPOSE: To compare the effects of the antidepressant drugs duloxetine and fluoxetine on depressive behaviors in rodents. METHODS: Eighteen male Wistar rats were given systemic injections of duloxetine, fluoxetine, or saline prior to a Forced Swimming Test (FST). Immobility and number of stops were measured. RESULTS: Rats given injections of fluoxetine displayed significantly less immobility (p = 0.02) and fewer stops than the control group (p = 0.003). Duloxetine significanlty reduced the nu...

LA CONCIENCIA MIRÁNDOSE A SÍ MISMA: Reconceptualizando la organización de los procesos conscientes desde un análisis budista.

Directory of Open Access Journals (Sweden)

Juan Cristóbal Ruiz D.

2007-01-01

Full Text Available La conciencia ha constituido uno de los principales problemas para las ciencias cognitivas. A un nive l epistemológico de la reflexión, esta dificultad est á dada en cómo se ha conceptualizado el problema, y las entidades conceptuales que constituyen el paradigma del procesamiento de la información, marco imperante del cognitivismo en la neurociencia cogni tiva y la psicología cognitiva. Pensar la concienci a como un producto de un proceso lógico-secuencial es un supuesto difícil de sostener dada la vasta evidencia actual de que el cerebro está en constant e actividad, con múltiples áreas que se activan de manera simultanea, y por otra parte en un organismo que si empre se encuentra en movimiento. Desde esta posici ón, proponemos la comprensión de la conciencia a partir de un análisis desde la filosofía budista, que es un riguroso estudio desde una perspectiva de primera p ersona. La psicología budista plantea a la concienc ia como un fenómeno interdependiente de causas y condi ciones y como un flujo dinámico, de momentos ligados en una relación de causalidad o karma . Este análisis que proveniente de las diferentes e xperiencias meditativas, con una enorme tradición, está relacio nado con los nuevos hallazgos de la neurociencia cognitiva y de la neurodinámica. Lo que nos plantea mos aquí, es proponer una reconceptualización preliminar que podría dar luces para un nuevo model o teórico para el estudio de los procesos conscientes.

Insatisfação corporal, comprometimento psicológico ao exercício e comportamento alimentar em jovens atletas de esportes estéticos

Directory of Open Access Journals (Sweden)

Leonardo de Sousa Fortes

2013-08-01

Full Text Available DOI: http://dx.doi.org/10.5007/1980-0037.2013v15n6p695 Evidências demonstram prevalência elevada para o comportamento alimentar inadequado em atletas. No entanto, pouco se sabe a respeito dos fatores que causam impacto sobre este fenômeno nesta população. O objetivo do estudo foi associar a insatisfação corporal e o grau de comprometimento psicológico ao exercício (GCPE ao comportamento alimentar inadequado em jovens atletas de esportes estéticos. Participaram da pesquisa 47 atletas do sexo feminino de alguns esportes estéticos (ginástica artística, nado sincronizado e saltos ornamentais, com idade entre 12 e 16 anos. Para avaliar o comportamento alimentar de risco para transtornos alimentares (TA, a insatisfação corporal e o GCPE foram utilizados o Eating Attitudes Test (EAT-26, o Body Shape Questionnaire (BSQ e a Commitment Exercise Scale (CES, respectivamente. Dobras cutâneas foram aferidas para o cálculo do percentual de gordura das atletas. Os resultados apontaram associação significativa entre a insatisfação corporal e o comportamento alimentar (p<0,05, assim como entre o GCPE e o comportamento alimentar de risco para TA (p<0,05. A partir da regressão linear múltipla, todas as variáveis, com exceção do percentual de gordura, demonstraram influências sobre o comportamento alimentar de jovens atletas. Este mesmo teste também apontou influências do percentual de gordura e da insatisfação corporal sobre os escores da CES. Concluiu-se que a insatisfação corporal e o GCPE foram fatores predisponentes para o comportamento alimentar de risco em atletas de esportes estéticos.

Ramallah Archive

Directory of Open Access Journals (Sweden)

Ahlam Shibli

2016-07-01

Full Text Available Este trabajo pone en relación documentos que se conservan en el Archivo Municipal de Ramallah con negativos que se encontraron en el propio Archivo y el desarrollo de la ciu- dad contemporánea. Once cajas de cartón se fueron llenando de negativos por el fotógrafo con sede en Ra- mala Garo Kuftedjian, en su Studio Venus. Después de su muerte su familia las cedió al municipio. Los negativos representan tanto personas solas como familias completas, a menudo con motivo de un evento particular: un matrimonio, la llegada de un nuevo bebé o un viaje. Fotografías familiares que se uti- lizan como testimonios de la integridad de la familia; los ausentes se hacen presentes por medio de una fotografía que muestra uno de sus parientes. Mientras que las fotografías muestran las di- ferencias en las relaciones sociales y los cam- bios en la moda, los documentos de archivo se re eren a períodos concretos de la historia palestina: la época bajo dominio jordano, la administración por las fuerzas de ocupación israelíes y el período posterior a los Acuerdos de Oslo, así como la creación de la Autoridad Palestina en Cisjordania y la Franja de Gaza. Finalmente, las fotografías de la ciudad en- focan elementos para la reorganización de la existencia colectiva e individual. Una de las condiciones principales es la falta de espa- cio. El apilamiento, la compresión, o el lle- nado de los vacíos conectan tanto los docu- mentos de archivo como el desarrollo urbano contemporáneo.

Achievement report for fiscal 2000 on research and development of key technologies for superconducting generator. Research and development of key technologies to increase density, research and development of key technologies to increase capacity, research and development of design technologies, and research of technologies; 2000 nendo chodendo hatsudenki kiban gijutsu kenkyu kaihatsu seika hokokusho. Komitsudoka kiban gijutsu no kenkyu kaihatsu / daiyoryoka kiban gijutsu no kenkyu kaihatsu / sekkei gijutsu no kenkyu kaihatsu / gijutsu chosa kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Researches have been made to increase density of 200,000-kW class generator and to increase capacity of 600,000-kW class generator necessary for putting superconducting generator into practical use. This paper summarizes the achievements in fiscal 2000. In the study of increasing densities of superconductors and field windings, strands were fabricated, in which aging heat treatment conditions, number of aging, and processing degrees between each aging were varied, to increase the critical current of Nb-Ti strand, wherein as high critical current as corresponding to about 90% of the target was obtained. Possibility of increasing the critical current with the final processing degree in the range of 4 to 5 was verified from the relationship between the final processing degree and the critical current. In the study of increasing capacities of superconductors and field windings, findings were acquired on enhancement of conductor stability and reduction in AC loss, with regard to superconductor strands well balanced in the two elements. Prospects were obtained in achieving the AC loss of 200 kW/m{sup 3} in the targeted superconductor. The residual resistance ratio was found to be 200, showing sufficiently high value, and sufficient function was verified in the stabilized copper. In the research of design technologies, primary basic design was performed. (NEDO)

WE-NET. Substask 4. Development of hydrogen production technologies; 1998 nendo suiso riyo kokusai clean energy system gijutsu (WE-NET). 4. Suiso seizo gijutsu no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Under the hydrogen-utilizing international clean energy system technology project WE-NET (World Energy NET Work), researches were conducted aiming at the establishment of a hydrogen production technology through electrolysis of polymer electrolyte solution. In fiscal 1998, element technologies were developed for the development of high-efficiency/large-capacity water electrolyzing plants using electrodeless deposition and hot pressing, research and investigation of optimum operating conditions were conducted, and a service plant conceptual design and a polymer electrolytic membrane were developed. In addition, literature was searched for the current state of ion exchange membranes and water electrolysis, both indispensable for the hydrogen production technology discussed in this paper. In the field of lamination of large cells (electrode surface:2500cm{sup 2}), an excellent energy efficiency level exceeding 90% set as the target for a large laminated cell performance test was achieved - 92.6% by electrodeless deposition and 94.4% by hot pressing. As for polymer membranes capable of resisting high temperatures, a membrane with an ionic conductivity of 0.066S/cm at 200 degrees C was newly developed. (NEDO)

Survey of the situation of technology succession. Databases of articles including in industrial technology museums; Gijutsu keisho jokyo chosa. Sangyo gijutsu hakubutsukan shuzohin D.B. hen

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

To promote the succession of history of and the creative use of industrial science technologies, the paper made lists and databases of the articles of industrial technology museums and material halls in Japan. Record/preservation and collection/systematization of history of the industrial technology is useful for forming bases necessary for promotion of future research/development and international contribution. Museums and material halls are the fields for making comprehensive and practical activities. The data were made as one of the basic databases as the first step for promoting activities for examining the technical succession situation in a long term range continuously and systematically. In the classification of the data, the energy relation was divided into electric power, nuclear power, oil, coal, gas and energy in general. Others were classified into metal/mine, electricity/electronics/communication, chemistry/food, ship building/heavy machinery, printing/precision instrument, and textile/spinning. Moreover, the traffic relation was classified into railroad, automobiles/two-wheeled vehicles, airline/space, and ships. Items were also set of life relation, civil engineering/architecture, and general. The total number of the museums for the survey reached 208.

FY 2000 research cooperation project on plastic processing technology/quality inspection technology; 2000 nendo kenkyu kyoryoku jigyo. Plastic kako gijutsu hinshitsukensa gijutsu ni kansuru kenkyu kyoryoku

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For the purpose of improving the production technology of plastic products in Saudi Arabia, the joint development was made of the formation technology/quality inspection technology of agricultural use and food packaging use polyolefin film optimum to environmental conditions of the site, in the light of the needs there, and the FY 2000 results were reported. In the field survey/joint study, for the xenon type weather resistant testing machine and the extruder of the inflation film forming machine which were transported from Japan, the following were carried out: confirmation of the situation of accepting them on the site, functional test of computer of the extruder, installation of the machine testing weather resistance, and the trial operation. In the domestic support study, the extrusion test at laboratory was conducted using the polyethylene resin produced on the site to acquire the basic data for formation stability. Further, the film formation test was made using the equipment with the same specifications as those of the equipment introduced to the site to study the performance of screw extrusion and the formation stability of film. Also conducted were the analytical test/quality evaluation of resin materials/film. (NEDO)

Report on an industrial machinery engineering policy study meeting. Studies on new energy industries; Sangyo kikai engineering seisaku kenkyukai (shin energy sangyo no kenkyu) hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1979-07-01

Effects extended to industrial areas by new energy development were analyzed by using the industrial relation table. Technological development of new energies can mass-produce energy without being restricted by energy resource availability, and retaining manufacturing facilities can exhibit energy reserve function with security. The technologies may be suitable for local energy supply. In the aspects of industrial policies and people's living, demands on diversification and improvement of the people's living may be responded, levels of scientific technologies may be enhanced, and contribution to improving the industrial structure may be expected. The energy industry includes a large number of related industries and has vast related areas. A large number of technology induced effects can be expected in the course of research and development. A market of huge size may be estimated in the future, by which level elevation of the industrial structure would be supported. Early promotion of the new energy development is an urgent assignment for the 1980's. In order to achieve this goal, it is necessary to promote research and development, proliferation and practical application, for which the physical strength of the present Japan must be utilized to its maximum in making human and fund investments. Expansion and improvement in the industrialization infrastructures are also important, whereas the government's subsidies must be increased, and vitality in the private sector must be incorporated into organized force. (NEDO)

Report on an industrial machinery engineering policy study meeting. Studies on new energy industries; Sangyo kikai engineering seisaku kenkyukai (shin energy sangyo no kenkyu) hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1979-07-01

Effects extended to industrial areas by new energy development were analyzed by using the industrial relation table. Technological development of new energies can mass-produce energy without being restricted by energy resource availability, and retaining manufacturing facilities can exhibit energy reserve function with security. The technologies may be suitable for local energy supply. In the aspects of industrial policies and people's living, demands on diversification and improvement of the people's living may be responded, levels of scientific technologies may be enhanced, and contribution to improving the industrial structure may be expected. The energy industry includes a large number of related industries and has vast related areas. A large number of technology induced effects can be expected in the course of research and development. A market of huge size may be estimated in the future, by which level elevation of the industrial structure would be supported. Early promotion of the new energy development is an urgent assignment for the 1980's. In order to achieve this goal, it is necessary to promote research and development, proliferation and practical application, for which the physical strength of the present Japan must be utilized to its maximum in making human and fund investments. Expansion and improvement in the industrialization infrastructures are also important, whereas the government's subsidies must be increased, and vitality in the private sector must be incorporated into organized force. (NEDO)

Report on the surveys in fiscal 1999 on foundations for establishing industrial technology strategies. Technological strategies by fields (Water related technology field); 1999 nendo sangyo gijutsu senryaku sakutei kiban chosa hokokusho. Bun'yabetsu gijutsu senryaku (mizu kanren gijutsu bun'ya)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This paper describes the surveys to establish strategies in the water related technology field. The primary question relates to realizing a circulation type water utilization society. Establishment of technologies as the element technologies is demanded on treating trace amount harmful substances and pathogenically harmful micro-organisms such as environmental hormones. Technologies requiring early practical application include high-efficiency energy recovery from sludge by means of methane fermentation, accelerated oxidation and super critical sludge decomposition, and composting. Structuring a comprehensive water management information system is also important. Establishment is demanded on such technologies as high stability sensors to treat harmful chemical substances, ultra high sensitivity bio-sensors for risk control, and detection of pathogenic micro-organisms. Alga identification and quantification systems are also necessary. In developing a contaminated environmental water and waste water purification system, early practical application is desired on technologies to purify soil and large-quantity diluted environmental waters by utilizing such natural materials as soil and activated carbons, biotope and micro-organisms. Manufacture of high function water by utilizing electromagnetic waves and ultra-sonic waves, and high-efficiency low-cost desalting technologies by means of membrane separation and evaporation are also required to be developed as water resource utilizing and water making technologies. (NEDO)

Achievement report for 1st phase (fiscal 1974-80) Sunshine Program research and development - Hydrogen energy. Research on hydrogen production technology using thermochemical method (Research on iodine-based cycle etc.); 1974-1980 nendo netsukagakuho ni yoru suiso seizo gijutsu no kenkyu seika hokokusho. Yosokei cycle nado no kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1981-03-01

Iodine-alkaline earth metal (Mg, Ca) cycles are discovered, and the one with Mg is found excellent. The reaction consists of four stages, that is, Stage (1) where 1/5Mg(IO{sub 3}){sub 2}+MgI{sub 2}(aq) is obtained from 6/5MgO+6/5I{sub 2}, Stage (2) where 1/5MgO+1/5I{sub 2}+1/2O{sub 2} is obtained from 1/5Mg(IO{sub 3}){sub 2}, Stage (3) where MgO+2HI is obtained from MgI{sub 2}+H{sub 2}O, and Stage (4) where H{sub 2}+I{sub 2} is obtained from 2HI. Since there is much iodine and water at Stage (1), MgO thrice MgI{sub 2} in mol is added for reforming and concentration. At Stage (4), where the decomposition rate is as low as 17-27% with the equilibrium dissociation reaction proceeding at 300-700 degrees C, hydrogen is selectively separated by permeation through a porous diaphragm for the acceleration of the reaction. As for materials for the device, they are narrowed down to high-priced ones, that is, Ta and Nb for Stage (1), Ni-50Cr for Stage (2), and Mo etc. for Stages (3) and (4). Under the circumstances, a study is started for the development of a chemical vapor plating process which is high in corrosion resistance. Other cycles such as sulfur-based cycles and hybrid cycles are also investigated. (NEDO)

Achievement report for fiscal 1997 (New Sunshine Project) on the development of superconductor power application technology. Research on a total system / investigative research on introduction effects; 1997 nendo chodendo denryoku oyo gijutsu kaihatsu (New Sunshine keikaku) seika hokokusho. Total system nado no kenkyu / donyu koka no chosa kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

This paper describes investigation and discussion on effects of introducing a superconductor power application technology. The generator sub-committee has compared features, technical problems and development expenses in the first and second proposals, but has not reached the final conclusion. The first proposal is targeted for early realization of 200-300 MW class generators with development cost of six to seven billion yen and a development term of seven years. These developments raise largely towards practical application the levels of material technologies, fabrication and processing technologies, and analysis and design technologies. The second proposal is intended of developing 200-300 MW class generators targeted for increased diameter, as a reduced size machine of a 600-MW generator being a future generator. It will take development cost of eight to nine billion yen with the period of nine years for the development. Majority of the technologies required for developing the future 600-MW class generator can be demonstrated. The AC superconductor device sub-committee has investigated design examples, clarified the specification requirements, and investigated and studied the development measures. The oxide superconductor sub-committee has investigated and studied making wires and conductors, and device application feasibility, but has not reached the stage of presenting specific research and development methods. The practical application strategy sub-committee has also not been able to present a collective measure because of difficulty of making future prospect on the electric power business. (NEDO)

FY 1998 report on the verification survey of geothermal survey technology, etc./Development of the reservoir fluctuation survey method (Summary). Theme 3. Development of the electric/electromagnetic survey method; 1998 nendo chinetsu tansa gijutsu nado kensho chosa choryuso hendo tansaho kaihatsu hokokusho (yoyaku). 3. Denki denjiki tansaho kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Three observation wells were drilled in the Ogiri experimental field. The depth of drilling was 101-120m. In the self-potential observation, admitted were fluctuations, etc. caused by daily changes (tidal changes and earth current), earth current by external magnetic field induction, well drilling noise and injection well. In the resistivity structure survey, the whole area indicated a three-layer (high/low/high) structure, and the shallow high-resistivity layer was correspondent with the new unaltered volcanic rock, and the medium-depth low-resistivity layer with the clayey alteration. On the assumption that the reservoir model is improved by properties of geothermal water and 35% of the returning geothermal water goes back to the production region, pressure/chlorine concentration were satisfactorily explained. Changes in chlorine concentration by the returning geothermal water are estimated at 22% within production reservoir and at 52% in injection region, and when considering temperature changes, it was predicted that fluctuations of the resistivity underground are within 20%. The accuracy of the MT method was studied by using the MT method with the existing MT method. The accuracy was not enough to detect a resistivity of 10%, and therefore, the repeated measurement by fixed electrode or the continued MT method monitoring is needed. (NEDO)

FY 1998 report on the verification survey of geothermal survey technology, etc./Development of the reservoir fluctuation survey method (Summary). Theme 1. Development of the fracture hydraulic survey method; 1998 nendo chinetsu tansa gijutsu nado kensho chosa choryuso hendo tansaho kaihatsu hokokusho (Yoyaku). 1. Danretsu suiri tansaho kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

The paper reported the results of the development of the fracture hydraulic method. As to the geothermal well hydraulic test method, the following were studied. Relating to the pressure transient test method, the detailed design of a system was conducted on a prototype hydraulic test system through the manufacture of element parts and feed back control mechanism and experiments to evaluate performance/operation characteristics of fields. Concerning the tiltmeter use measurement method, the field experiment by tiltmeter measurement was carried out in the Hijiori area where existing data and the wells used exist. With respect to the two-phase flow rate measuring method, by a combination of the existing vortex flow meter, vapor quality meter and tracer method, conducted were a field experiment on comparison/calibration of the existing flow meter and tracer method and a numerical simulation of change in vapor liquid in association with temperature/pressure changes in two-phase flow pipe, and the semi-quantitative calibration method was studied. About the water permeable logging method, study was made on the following items. In regard to the hydrophone VSP method, data analysis of the method was conducted. As to the development of individual feed zone flow meter measuring device, the evaluation was conducted of accuracy of Doppler shift rates for flow rate, pressure, flow velocity, well diameter and change in concentration and characteristics of acoustic unit. As a result, the flow rate was unable to be detected with satisfactory accuracy. (NEDO)

Corrosion control of electronic materials; Denshi zairyo no fushoku seigyo gijutsu

Energy Technology Data Exchange (ETDEWEB)

Ishikawa, Y. [Hitachi Ltd., Tokyo (Japan). Mechanical Engineering Research Lab.

1995-11-20

Electronic materials are used in wide varieties of materials starting from hightech products like large computers, information network facilities and so forth, to vehicles, home electrical appliances, OA facilities, video game. Again, even though the part itself may be comparatively simple, high reliability is required when used in high degree system. Further, their uses irrespective to indoor or outdoor environments, are spread to wide range starting from the severe corrosive environments like coastal industrial area, drainage treatment place and so forth to low corrosive environments like general housing, offices and so forth. However, the classification of materials according to the environments where they are used is not so much carried out because preference is given to the function as an electronic part different to the large mechanical construction materials. In this report, regarding the corrosion control technology of electronic materials specially approach is made from material side, and among the various types of electronic materials, aluminium cable for LSI and magnetic materials are outlined. 37 refs., 10 figs., 2 tabs.

Earth-friendly refuse processing. Chikyu kankyo wo kangaeta gomi shori gijutsu

Energy Technology Data Exchange (ETDEWEB)

Nishigaki, M. (Takuma Co. Ltd., Osaka (Japan))

1994-06-15

This paper contains six articles: (1) Earth-friendly Garbage Disposal, (2) Erasable Copy Machine, (3) Making Plastics from Shell of Crustacean, (4) From Garbage into Petroleum, (5) Utilization of Sewage Sludge for a Recycle-type Society, and (6) FRP Boat Disposal Technology. All articles address the latest topics about disposal of wastes and garbage that have been attracting general attention in environmental issues. The article (1) presents the latest waste incineration technology, garbage power generation, and disposal and utilization of incineration residues. The article (2) is about a prototype of the copy paper regeneration device (toner remover) developed and produced by Ricoh Co., Ltd. The article (3) describes biodegradable plastics using chitin and chitosan that can be acquired from shell of crustacean. The article (4) describes how to extract oil or gas from plastic waste through its thermal decomposition. The article (5) presents volume reduction and utilization of sewage sludge. The article (6) presents disassembling and disposing waste plastic boats that have been rapidly increasing. 8 refs., 27 figs.

CMOS analog integrated circuit design technology; CMOS anarogu IC sekkei gijutsu

Energy Technology Data Exchange (ETDEWEB)

Fujimoto, H.; Fujisawa, A. [Fuji Electric Co. Ltd., Tokyo (Japan)

2000-08-10

In the field of the LSI (large scale integrated circuit) in rapid progress toward high integration and advanced functions, CAD (computer-aided design) technology has become indispensable to LSI development within a short period. Fuji Electric has developed design technologies and automatic design system to develop high-quality analog ICs (integrated circuits), including power supply ICs. within a short period. This paper describes CMOS (complementary metal-oxide semiconductor) analog macro cell, circuit simulation, automatic routing, and backannotation technologies. (author)

Investigation into the situation of technology succession; Gijutsu keisho jokyo chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

The paper made a fundamental investigation to promote historical succession and creative use of the industrial scientific technology. As for the wind power generation, the large-scaling became centralized wind power plants, and the downsizing became the distribution to remote areas. The solar power generation shifted from the thermal power generation to the light power generation. There is also a method to use solar heat directly. As to power systems and the distribution of electric power, the subjects are a combination of energy source, geographical energy transportation, and heightening of consumption efficiency. It was indicated that the subjects changed with a lapse of time under technical/social/systematical conditions, and under the developable energy amount prescribed by those conditions. Heightening of efficiency, which can be realized even by a paper simulation, was realized partly helped by the developing measuring technology. The environmental problem becomes historically severe as a condition of the technical development. However, aimed at was the process where discharged matters and by-products are effectively used and disused matters are not produced. In the coal-thermal power generation, for example, a load of flue gas purification was reduced by the conversion to LNG. 253 refs., 65 figs., 12 tabs.

Bio-desulfurization technology in Japan; Wagakuni ni okeru baio datsuryu gijutsu

Energy Technology Data Exchange (ETDEWEB)

Maruhashi, K. [Petroleum Energy Center, Tokyo (Japan)

2000-05-01

A bio-reaction of microbes (catalytic reaction by an enzyme) is characterized in that the reaction is carried out at a normal temperature and under a normal pressure and has particularly high specificity with respect to substrate (reactant). It is considered that a low loading process of environment harmony type can be constructed by applying the bio-reaction in petroleum refinery process. CO{sub 2} exhaust and energy consumption in the bio-desulfurization (BDS) is estimated to be 70 to 80% lower than those in hydrodesulfurization (HDS). The bio-technologies that can be applied to the petroleum refinery process include, for example, desulfurization, demetallation, dewaxing, denitration, cracking and so on. In this paper, the present state of bio-desulphurization technology is introduced. Particularly, as the research results in Japan, acquirement of mesophile R.erythropolis KA2-5-1 strain, thermophile Paenibacillus sp. A11-2 strain whose optimum temperature is 50 degrees C, BT degradation fungus Rhodococcus sp. T09 and the like are introduced. (NEDO)

Survey on the succession situation of technologies; Gijutsu keisho jokyo chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-03-01

The basic survey was carried out to promote the succession and creative use of the previous industrial science and technology. The following 5 themes were summarized in fiscal 1993. On `Fuel technology policy and technological development,` Navy Fuel Depot, Chemical Research Institute at University of Kyoto, Central Laboratory of South Manchuria Railway Co., and Fuel Research Laboratory of the Ministry of Agriculture and Commerce played important roles, and the 1000atm continuous hydrogenation system was completed in 1941. On `Technology of long-distance power transmission,` high-voltage insulation technology finally reached an international level after World War II. On `Unification of frequency and electrical technology,` the two-frequency system for eastern and western areas was established before World War II, and construction of Sakuma Frequency Conversion Station allowed power interchange between two areas. On `Organization of national research laboratories,` the Agency of Industrial Science and Technology distinguished the roles of new and existing laboratories. On `Wind power technology in Europe and America,` comparison between American and Danish approaches is the most important issue today. 146 refs., 20 figs., 13 tabs.

Evaluation technology of human behavior cognition; Ningen kodo ninchi hyoka gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

For human engineering and improvement of the living environment, the evaluation technology of human behavior cognition was studied. For the future reformation and creation of economic structure, the following are required: establishment of safe and affluent communities, further improvement of the safety and harmonious balance of people, lives and society, and R & D close to people and social needs. Introduction of Product Liability law and a fail-safe concept are examples of such efforts. However, since many accidents are found in the human society, the relation between human errors and human characteristics should be studied in detail. The cognitive science of human behavior is an objective evaluation technology from the viewpoint of human being, object, environment and society. Based on these social and technological background, the feasibility of the evaluation technology is studied, and the future trend and skeleton of this project are clarified. The domestic and foreign trends of technologies concerned are thus surveyed, and the important points, features, skeleton and ripple effect of the technology are summarized. 500 refs., 70 figs., 5 tabs.

FY 1999 report on the survey of the basic cooperation project of enhancement of the international energy consumption efficiency. Project on promotion of exchanges with the persons concerned with government agencies, etc.; 1999 nendo kokusai energy shohi koritsuka nado kyoryoku kiso jigyo, kokusai energy shohi koritsuka chosa nado kyoryoku kiso jigyo chosa hokokusho. Seifu kikan nado kankeisha koryu sokushin jigyo

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For the purpose of promoting the understanding of effective energy utilization and constructing corporative relations between countries, the persons concerned with government agencies of India, China, Indonesia, Vietnam, Myanmar and Thailand were invited to Japan, and exchanges of opinions were made on policies, technical development, the state of the introduction, etc. The persons concerned with governments of India, China and Indonesia participate in NEDO Forum 2001 to give lectures on the energy policy of their own. The persons sent from the Vietnamese government paid visits for survey to NEDO, Obayashi Corp., Kawasaki Heavy Industries, Ltd., Mitsubishi Materials Corp. and Taiheiyo Cement Corp. as reference of the model project on cement sintering plant power reduction. The persons sent from the Myanmar government paid visits for survey to NEDO, ECCJ, Chiyoda Corp., Yokogawa Electric Corp. and Cosmo Oil Co. as reference of the model project on energy conservation at fertilizer plant. The persons concerned with the Thai government paid visits for survey to the plants concerned with the model project on residue combustion waste heat recovery facilities at paper mills and the model project on waste heat recovery at steel material heating furnace. (NEDO)

El proceso del parpadeo ocular como indicador de emoción en la prueba de nado forzado

Directory of Open Access Journals (Sweden)

Samuel Bautista Peña

2012-11-01

Full Text Available The relaxed posture of the eyelids keeps the eyes closed, the eyes open is part of the active behavior in living organisms, the activity gives rise to the blinking eye, that for the majority goes unnoticed. You can classify several types of eyeblink, blinking is a response that participates in the facial expression of the emotions. The muscle of the eyelid is essentially involved in emotional responses, as shown during the surprise, fear, or startle. We have studied the eyeblinking linked to aversive events of short duration. We need to know what is happening with the blinking eye to aversive stimuli with longer duration. The forced swimming test (PNF, stimulation provides a sharp, intense and prolonged by 15 minutes. Then we assess the response of eye blinking under the effect of the aversive stimulation provided by the PNF. We used 10 type Wistar male rats experimentally naive, with a weight next to the 300 g were housed with boxes-individual room and free access to food and water. The response of blinking eye was defined as: the behavior of closing and opening in a short period that the eyelids cover the eyes of the rat. We used a modified procedure of the PNF in establishing as a criterion of time 15 minutes for each of the two trials. The first assay began to put the rat in the cylinder with water. The second assay was performed 24 hours after the first assay. The sessions were videotaped, of which the recordings were obtained. The graph shows us a process of change in the blinkin eye, this suggests to us that this is a eyeblinking emotional, which passes through: the surprise; anxiety; and something like depression. It is a complex of processes in which they are involved a variety of mechanisms. We compare our results with other researches of blinking. The descriptors process involved in the anxiety-depression, are at different levels and can go from its link with physiological states until the mechanisms at the biochemical level responsible for that behavior.

FY 1999 report on the study of the future course, etc. of 'the basic survey for promotion of Joint Implementation, etc.'; 1999 nendo 'kyodo jisshi nado suishin kiso chosa' no kongo no hokosei nado ni kansuru kento chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

The paper conducted the demonstration of the multiplier effect of 'the model project for heightening of the international energy consumption efficiency, etc.' carried out by NEDO and its subsidiary project, 'the project on the basic survey for promotion of Joint Implementation (JI),' and the comparative study between these projects and the JI/CDM projects proposed in the world. In the quantitative evaluation of the multiplier effect, in the case of making the demonstration of the same technology in the same area both in the model project and the basic survey for promotion of JI, it becomes possible to grasp the CO2 reduction effect with high accuracy, but the CO2 reducible amount is small. Inversely, as to the technology for which the basic survey for promotion of JI is studied, but the model project is not carried out, it becomes possible to grasp the CO2 reduction effect with low accuracy, the CO2 reducible amount is large. In the comparison with the JI/CDM projects proposed in the world, the CO2 reduction amount was approximately $2.7 billion, 250 million tons, in the UNFCCC project, and approximately $5.0 billion, 500 million tons, in the IJ project. There was no very big difference in the cost effect. (NEDO)

Fiscal 2000 achievement report. Research and development of fast-acting innovative energy-environment technology (Development of fast-acting high-efficiency solar cell technology - Development of high-quality ingot manufacturing technology); 2000 nendo shin energy sangyo gijutsu sogo kaihatsu kiko itaku kenkyu gyomu seika hokokusho. Sokkoteki kakushinteki energy kankyo gijutsu kenkyu kaihatsu (Sokkogata kokoritsu taiyo denchi gijutsu kaihatsu - Kohinshitsu ingot seizo gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Research and development was conducted of a technology for manufacturing an ultrathin polycrystalline silicon solar cell capable of efficiency enhancement and cost reduction earlier than the types of polycrystalline solar cells now available on the market. In this fiscal year, a silicon melt/solidification experimenting apparatus was built for manufacturing high-quality silicon ingots. Using an apparatus with its performance similar to the newly built one, a preliminary experiment was conducted involving high-purity silicon ingot manufacturing. In the experiment, boron was added to 75 kg of silicon for semiconductor devices so that its resistivity may be 0.5 ohm-cm. The silicon was melted in a quartz mold, and then subjected to unidirectional coagulation at 0.13 mm/min that started at the bottom to proceed upward. The result was a silicon ingot 44 cm times 44 cm times 17 cm (height). The ingot thus obtained exhibited 0.4-0.8 ohm-cm in resistivity distribution. Solar cells produced from the ingot showed a conversion rate of 16.9%. (NEDO)

Fiscal 1997 R and D project on industrial science and technology under a consignment from NEDO. R and D of the ultimate manipulation technology of atoms and molecules; 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo gijutsu Sogo Kaihatsu Kiko itaku. Genshi bunshi kyokugen sosa gijutsu no kenkyu kaihatsu seika hokokusho (genshi bunshi kyokugen sosa gijutsu no kenkyu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

This paper describes R and D of the ultimate manipulation technology of atoms and molecules (atom technology). The R and D aims at establishment of observation/manipulation technology of atoms and molecules as common basic technology in various industrial fields such as new material, electronics, bio-technology and chemistry. The R and D thus aims at establishment of observation/manipulation of solid surfaces and DNA organic molecules, formation of fine structures of atomic surface arrangement, and calculation/ simulation for predicting a reaction theorem of atom and molecule surfaces. In fiscal 1997, research was made on improvement and development of computer simulation environment, and description of an excited state of electrons by Green function. Establishment of a construction method and computation code is under investigation for pseudo- potential dependent on excitation energy. Survey was made on research trends of the atom technology by visiting overseas academic societies and institutions. International Symposium on Atom Technology was also held in Tokyo in Nov. 1997

Fiscal 1998 R and D project on industrial technology. Development report on use technology of bioresources such as bioconsortia (Development of analysis technology of bioconsortia); 1998 nendo sangyo gijutsu kenkyu kaihatsu jigyo. Fukugo seibutsukeinado seibutsu shigen riyo gijutsu kaihatsu (fukugo seibutsukei kaiseki gijutsu no kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

For use of advanced functions of bioconsortia (complex microorganisms composed of more than 2 microorganisms with certain specific function), this project analyzes specific functions of specific organisms and the interaction between the specific functions, and develops isolation and incubation technologies of component organisms. In fiscal 1998, to promote this project, the meetings were held frequently in National Institute of Bioscience and human Technology. Study was made on production of useful substances and useful degradation functions in association with bioconsortia. The result showed that microorganisms coexisting with nematode produced physiologically active substances exhibiting antimicrobial activities to tubercle bacillus, MRSA and others, microorganisms coexisting in eggs of some insects produced substances having antiviral activities and activities against pathogenic bacteria in a plant, and microorganisms growing in some plants or mycorrhiza organisms produced insecticidal substances or growing-promoting substance. The basic understanding was obtained on cooperative actions of bioconsortia to bioremediation and degradation of organic substances. (NEDO)

Research on fabrication technology for thin film solar cells for practical use. Technological development for qualitative improvement (CuInSe2 based PV cell); Usumaku taiyo denchi seizo gijutsu no jitsuyoka kenkyu. Kohinshitsuka gijutsu (CuInSe2 taiyo denchi seizo no gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

Tatsuta, M [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

1994-12-01

This paper reports the study results on the fabrication technology of CuInSe2 based PV cell in fiscal 1994. (1) On formation of high-quality CIGS thin films by bilayer method, Mo film was deposited on a glass substrate by sputtering, and CIGS film with different Ga/In ratios was next formed on the substrate by quaternary simultaneous deposition at different In and Ga deposition speeds. In addition, CdS film was deposited on the CIGS film, and ZnO and ITO films were finally deposited on it by sputtering to complete solar cell. This solar cell offered the maximum conversion efficiency among cells using CIGS film. (2) On formation of high-quality CIGS thin films by three-stage method, a certain correlation was found between substrate temperature and CIGS film composition by monitoring substrate temperature in film forming process. This phenomenon allowed rigorous control of CIS film compositions important for CIS thin film solar cells. (3) On low-cost process technology for thin film formation, Cu(In,Ga)S2 solid solution film was fabricated by expanded selenic process. 3 figs.

Technological development for super-high efficiency solar cells. Technological development for crystalline compound solar cells (high-efficiency III-V tandem solar cells); Chokokoritsu taiyo denchi no gijutsu kaihatsu. Kessho kagobutsu taiyo denchi no gijutsu kaihatsu (III-V zoku kagobutsu handotai taiyo denchi no gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

Tatsuta, M [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

1994-12-01

This paper reports the study results on technological development of III-V compound semiconductor solar cells in fiscal 1994. (1) On development of epitaxial growth technology of lattice mismatching systems, the optimum structure of InGaAs strain intermediate layers was studied for reducing a dislocation density by lattice mismatching of GaAs layer grown on Si substrate and difference in thermal expansion coefficient. The effect of strain layer on dislocation reduction was found only at 250dyne/cm in strain energy. Growth of GaAs layers on the Si substrate treated by hydrofluoric acid at low temperature was attempted by MBE method. As a dislocation distribution was controlled by laying different atoms at hetero-interface, the dislocation density of growing layer surfaces decreased by concentration of dislocation at hetero-interface. (2) On development of high-efficiency tandem cell structure, tunnel junction characteristics, cell formation process and optimum design method of lattice matching tandem cells were studied, while thin film cell formation was basically studied for lattice mismatching tandem cells. 45 figs., 8 tabs.

Technological development for super-high efficiency solar cells. Technological development of solar-high efficiency singlecrystalline silicon solar cells (high quality singlecrystalline silicon substrates); Chokokoritsu taiyo denchi no gijutsu kaihatsu. Chokokoritsu tankessho silicon taiyo denchi no gijutsu kaihatsu (kohinshitsu tankessho silicon kiban no gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

Tatsuta, M [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

1994-12-01

This paper reports the study results on technological development for high quality efficiency singlecrystalline silicon substrates in fiscal 1994. (1) On electromagnetic casting/once FZ bath method, a Si single crystal of 600mm long was successfully obtained by improvement of power source frequency and furnace parts. High carbon content resulted in no single crystal including solids. In undoped electromagnetic casting ingots, resistivities over 1500ohm-cm were obtained because of effective preventive measures from contaminants. (2) On electromagnetic melting CZ method, since vibration and temperature control of melt surface by magnetic shield was insufficient for stable pulling of single crystals, its practical use was hopeless. (3) On electron beam melting CZ method, a Si single crystal of 25mm in diameter was obtained by preventive measures from evaporation of Si and influence of deposits, and improved uniform deposition distribution in a furnace. The oscillation circuit constant of power source, and water-cooling copper crucible structure were also analyzed for the optimum design of electromagnetic melting furnaces. 3 figs., 1 tab.

Development of technology for thin substrate polycrystalline solar cells for practical use. Development of manufacturing technologies for low-cost substrates (low-cost Si substrates); Usugata takessho taiyo denchi seizo gijutsu no jitsuyoka kenkyu. Tei cost kiban seizo gijutsu kaihatsu (usugata takessho kigan seizo gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

Tatsuta, M [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

1994-12-01

This paper reports the study results on manufacturing technologies for low-cost high-quality Si substrates in fiscal 1994. (1) On the 220mm square type electromagnetic casting technology, development of fast stable casting technology was studied using the previously installed 220mm square type electromagnetic casting furnace. As a result, continuous stable casting was achieved at high casting speed up to 3.0mm/min. Any degradation of crystalline quality due to high speed casting was not found. (2) On the 350mm square type electromagnetic casting furnace, oscillation circuit constants were analyzed for design of the power source for No.4 electromagnetic casting furnace. In graphite heating experiment using the 350mm square type water-cooling copper crucible heated by 1000kW high-frequency power source, sufficient heat quantity was obtained for initial melting of Si. Any problems in Si melting were not found through Al block melting test. 6 figs.

Fiscal 1997 report under consignment from NEDO on photon measuring/processing technology (development of power generation facility use high-function maintenance technology); 1997 nendo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku photon keisoku kako gijutsu (hatsuden shisetsuyo kokino maintenance gijutsu kaihatsu) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

A research/development was conducted on technologies of photon applied measuring/photon applied processing/photon generation which are usable for heightening of reliability and maintenance efficiency of power generation facilities. In fiscal 1997, high melting-point metal particles were manufactured by high energy density laser for formation of high temperature and stabilized fine functional circuit. Further, a wavelength changeable ultra red laser light source was studied which can make in-situ measurement of gas concentration and components. A study was also made to examine the surface composition by measuring fluorescent X-rays emitted by radiating high intensity laser beam on the surface of material. A rod type and a slab type as a high-output complete-solidified laser are under development. There is also a development aiming at high speed/high quality photon processing such as high speed/high precision welding/cutting and laser joining. Besides, a study is being made of high energy pulse/high quality beam complete-solidified laser. The paper made a comprehensive survey of the trend of the photon measuring/monitoring technology, and made a systematical arrangement of the developmental subjects extracted. 142 refs., 357 figs., 62 tabs.

FY 2000 report on the results of the development of the program system CO2 fixation/effective utilization technology. Development of the technology to assess global warming gas recovery/emission control by restoring/preserving the tropical mangrove coastal ecosystem; 2000 nendo program hoshiki nisanka tanso koteika yuko riyo gijutsu kaihatsu seika hokokusho. Mangrove nado nettai engan seitaikei no shufuku hozen ni yoru chikyu ondanka gas kaishu hoshutsu yokusei hyoka gijutsu no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For the purpose of developing the technology to assess the CO2 storage amount using the tropical mangrove coastal ecosystem, survey was conducted in the mangrove tree area in Ishigaki island, Japan and in Trat province, Thailand, and a draft of the assessment method was worked out. As to the assessment of the CO2 existence amount by analysis of satellite pictures, the regression equation between the mangrove existence amount and Landsat satellite data was determined to study a method for assessment of the CO2 storage amount in the whole area for survey. Further, using the relational equation between NDVI and LAI, vegetation indices reflecting vegetation conditions, methods to estimate the CO2 absorption amount by photosynthesis of mangrove tree community, the CO2 emission amount by respiration and the net production amount. Concerning the technology to assess the terrestrial area photosynthesis CO2 absorption amount, methods were studied for direct measurement of the amount of photosynthesis/respiration of the leaf area of mangrove tree community and the respiration amount by area such as trunk, branch and root and for assessment of CO2 absorption amount. Besides, studies were made on a variety of items such as the CO2 absorption/emission amount by underwater photosynthesis/respiration and decomposition of organic substances, the seawater exchange amount, and the rate of decomposition of organic substances. (NEDO)

Research, development, and evaluation of basic technologies for next-generation industries. Technologies of mass culture of cells; Jisedai sangyo kiban gijutsu kenkyu kaihatsu hyoka. Saibo tairyo baiyo gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1990-03-01

The project aims to establish basic technologies for the mass culture of cells by utilizing the features of animal cells, which will enable a large, stable supply of fine chemicals such as highly functional physiologically active proteins whose industrial production the conventional technique of synthesis fails to realize. For this purpose, efforts are exerted to select cells which are capable of producing target substances, to breed highly productive strains, to develop a serumless medium that satisfies demands for an all-purpose feature and heat sterilization, and to develop technologies of high-density culture and effective refining, etc. Some DNA (deoxyribonucleic acid) recombination technologies are also resorted to. As the result, a high-density culture of 2 times 10{sup 8} cells/ml has become available. Production is now feasible of various differentiation-inducing elements such as monoclonal antibodies with anti-HB virus activity, DIF, etc. Furthermore, cooperation with the Tsukuba University leads to the discovery of a novel vasopressor peptide (endothelin). The heat sterilization accepting serumless medium, which is put to practical use as the first of the kind in the world under this research and development project, contributes to the advancement of basic studies about cell biology. (NEDO)

Survey of the trend of technical development and industrial policies in Asian countries; Asia shokoku ni okeru gijutsu kaihatsu no doko to sangyo gijutsu seisaku ni kansuru chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

A sharp rise in industrial productivity in Asia countries indicates a rising level of R and D technology. Since Japan has not clearly grasped the R and D ability in these countries, it has not given appropriate personnel/material R and D support to them. Therefore, for the purpose of exactly grasping the R and D ability of Asian countries (Korea, Taiwan, the Philippines, Indonesia and India) and studying an effective and appropriate method for R and D cooperation, a survey was conducted of R and D potentials in Asia and R and D support policies of the countries. As a result of the survey, the following are taken up as items to be considered: promotion of exchanges between Tsukuba, etc. in Japan and research/university towns and science parks being constructed in lots of countries, participation of private companies in high-tech joint work in cooperation with Japan, sending information from Japan using internet, etc. and exact grasp of needs at partner side, cooperation given to new comers without asking for research results (use of OB researchers, etc.) 25 refs., 39 figs., 59 tabs.

Survey and research on the effects of technological development. Annex (Tables of technology-related data); Gijutsu kaihatsu no koka ni kansuru chosa kenkyu. Bessatsu (gijutsu kanren data list)

Energy Technology Data Exchange (ETDEWEB)

NONE

1982-03-01

Compiled into a report are the data about trends in Japan's research and development efforts broken down by industry covering a period of 1960-1980. The data items are quite versatile, including the number of companies engaged in researches and their rates, number of employees, total sales volume, profits through business, number of employees related to researches, number of dedicated researchers, number of dedicated researchers per 10,000 employees, disbursement of in-house research expenses, rate of personnel expenses to in-house research expenses, rate of disbursement of in-house research expenses to total sales volume, rate of disbursement of in-house research expenses to profits through business, disbursement of in-house research expenses per company, disbursement of in-house research expenses per dedicated researcher, in-house research expenses broken down by purpose (basic research, applied research, research for development), component ratio (basic research, applied research, research for development), number of dedicated researchers per speciality (total number, mathematics and physics, chemistry, biology, geology, engineering, civil engineering and construction, machinery and ship and aviation, electricity and communication, mining and metallurgy, textile, agriculture and forestry, fishery, stock-breeding and veterinarian, medicine and dentistry, pharmacy), number of technologies exported, total sum of export, etc. (NEDO)

Research and development of utilization technology of solar thermal system for industrial and other use. Development of system of advanced heat process type (chemical refrigeration and cold storage system using solar heat); Sangyoyo nado solar system jitsuyoka gijutsu kaihatsu. Advanced heat process gata system no kaihatsu (taiyonetsu reito reizo no kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

Takita, M [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

1994-12-01

Described herein are the results of the FY1994 research program for chemical refrigeration and cold storage system using solar heat. The study on refrigeration materials are aimed at development of new hydrogen-occluding alloys which show good hydrogenation equilibrium characteristics and reactivity at temperature required for stand-alone refrigeration systems aided by solar heat, and still new hydrogen-occluding alloys operable at refrigeration temperature for lower-temperature systems. For the refrigeration materials capable of producing low-temperature heat of -10{degree}C at a regeneration temperature of 140{degree}C produced by solar heat, a La-Ni-Mn-Al alloy is selected for high-temperature use and a La-Y-Ni-Mn alloy for low-temperature use. The study on technology for refrigeration modules develops high-efficiency heat exchangers for refrigeration and regeneration, compatible with the hydrogen-occluding alloys. It also develops air-and water-cooling techniques for hydrogen-occluding alloys, where air is used as the heat source. The test apparatus is designed, installed and operated, to attain a low temperature of -10{degree}C or lower with a heat source of 140{degree}C and air heat source of 28{degree}C. 7 figs.

Fiscal 1998 research report on the demand forecast of rare element minerals, recycling technology of rare elements from waste, and substitute rare element minerals; 1998 nendo chosa hokokusho. Kisho genso koseki no juyo yosoku, kisho genso no haikibutsu kara no kaishu gijutsu oyobi daitai kisho genso koseki nado ni kansuru chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Rare element mineral is indispensable material for functionalization of high-tech raw materials. Its deposit is poor, an increase in its future demand is expected, and its information disclosure is insufficient because of strategic important material. To solve these problems, the following were studied systematically, and urgent research themes on rare element minerals were clarified: (1) High-efficiency recycling technology of rare elements, (2) Waste treatment system after recycling of rare elements from the viewpoint of environmental measures, (3) Establishment of the database of rare element minerals, and development of new substitute rare element minerals, and (4) Design method of substitute materials possible to generate various existing functions without any rare elements. Among them, in particular, precise separation of 46 kinds of rare elements from waste of high-tech raw materials, and recycling of rare elements from zinc refining waste and pyrite ore deposit containing copper were pointed out as important themes. (NEDO)

FY 2000 report on the trend survey of technical development of high speed/high function electronic devices such as quantum functional devices in association with the rationalization of energy utilization; 2000 nendo energy shiyo gorika ni kakawaru ryoshika kino soshi nado kosoku kokino denshi device no gijutsu kaihatsu doko chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Concerning the results of the R and D made by NEDO of superlattice devices (FY 1981-1990) and quantum functional devices (QFD) (FY 1991-2000) as high speed/high function electronic devices, this survey was aimed at investigating the trend of the newest technology to grasp the technical effects, the state of commercialization/product-making, and the future. The effects, technical subjects, etc. in the R and D of superlattice devices were succeeded to the R and D of QFD as the succeeding project. Here, therefore, the paper arranged the outlook of the commercialization/product-making in relation to the R and D of QFD and the future R and D subjects. In the R and D, features of QFD as target were made clear. The commercialization is limited to Motorola's QMMIC, Fujitsu's RHET, etc. As to the other R and D items, subjects of the technical development to be implemented toward the commercialization just became clear. The subject is the heightening of micro (nano meter) processing technology. The important subject, in particular, is compatibility of the heightening of micro processing and the improvement of throughput. (NEDO)

Fiscal 1994 report on technological results. Development of fuel cell technology such as urban energy center (Survey for practical development of optical system of decentralized power source for residential use); 1994 nendo toshi energy center nado nenryo denchi gijutsu kaihatsu seika hokokusho. Minseiyo bunsangata dengen saiteki system jitsuyoka kaihatsu chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-05-01

Feasibility study was conducted on the technology for practical application of a several kW class fuel cell for the people's livelihood, particularly, for residential use. The study was made in six areas consisting of study on the present state of technology, conceptual design of a small fuel cell, survey on a promising market, basic concept of cell for residential use, feasibility study on application and on introduction. There is no record of development of the several kW class; while the fuel cell excels in the efficiency of energy utilization and the environmental conservation, its performance greatly deteriorates by start and stop under the present technology. Accordingly, it is a prerequisite that the equipment is for an electric heat combined type and for system interconnection. Also, while it is proper that the cell is phosphate type and that the fuel is natural gas, an innovation is necessary in the technology for reforming the cell and the fuel. The conceptual design revealed the possibility of a power generation system having a generating efficiency of 32%, exhaust heat recovery rate of 30%, and dimension of 75x65x150 cm. On the basis of a feasibility study on the application to the combination of a house and a beauty parlor, an advantage was recognized in the fuel unit cost of 5 yen/meal and the equipment cost of 200-250 thousand yen/kW, with demand estimated for 2.5 million installations nationwide including 950 thousand in natural gas supply districts. (NEDO)

Industrial technology research and development project for global environment in fiscal 1998. Report on achievements in research and development of technologies for fixation and effective utilization of carbon dioxide by utilizing bacteria and algae; 1998 nendo saikin sorui nado riyo nisanka tanso koteika yuko riyo gijutsu kenkyu kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Microorganisms are cultivated industrially in a great quantity to fix CO2 at efficiency higher than that of photosynthesis in natural world to develop technologies to re-utilize them as resources. This paper describes achievements in fiscal 1998. Existing strain samples of photosynthesized bacteria and micro-algae were screened to continue discussions on optimal culture conditions, and evaluation on properties. Genes that provide Chlorella with antibiotic resistance were introduced to have performed evaluation on function manifestation, and acquired enzymatic genes of unsaturated {omega} 3. Using green algae as the object, reduction in the processing time has resulted in acquiring a large number of fused cell colonies. Discussions were given on conditions to breed photosynthesized bacteria and fix CO2. Structural analyses were performed on CA protein as an enzyme related to take CO2 into living organisms, and on genes. Developments were carried out on a photosynthesizing bio-reactor and useful substance producing technologies on a continual basis. A 200-liter scale light collection type bio-reactor improved the fixing capacity by 30% in Chlorellas by changing the culture medium. The direct light receiving panel type bio-reactor can utilize even scattered light, with its fixing capacity per installation area exceeding the target. Fundamental data were acquired with Chlorellas on utilizing feeds, fertilizers and building materials. (NEDO)

Report on the achievements in the Sunshine Project in fiscal 1987. Collection of data from coal liquefaction processes, and development of a disposal system; 1987 nendo sekitan ekika process nado no data no shushu, shori system nado no kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1988-03-01

The present study is intended to investigate the current status of the information control system in the coal liquefaction technology development project, and structure a coal liquefaction database system to manage and utilize comprehensively the items of information provided by the system. Section 2 shows the result of epitomizing opinions on the purpose of the coal liquefaction database by means of a questionnaire survey to NEDO, and opinions of people of experience and academic standing. Section 3 depicts the basic conception of a coal database total system. Section 4 summarizes the conceptual idea of the fundamental database by washing out the data input and output, and the contents recorded in the database. Section 5 summarizes the basic sub-system required for management and utilization of the database, and different application systems for data analysis required in each stage of performing the coal liquefaction technology development, and for operation assistance. Section 6 summarizes a general technological information retrieval system, in which general information on coal liquefaction is recorded, processed, and registered and accumulated in the database, and then the information retrieval and the original information providing service are carried out. Section 7 summarizes philosophies on development and operation of the coal liquefaction database, operating institutions, and problems to be solved. (NEDO)

Manufacturing technology for advanced jet engines; Jisedai jetto engine no seizo gijutsu

Energy Technology Data Exchange (ETDEWEB)

Hirakawa, H [Kawasaki Heavy Industries Ltd., Kobe (Japan)

1997-04-05

A part of the latest production technologies for aircraft jet engines is introduced. Outline of the turbofan engine, turbo-prop engine, and turbo-shaft engine are given. Every one of them employs a gas turbine engine comprising a compressor, combustor, and a turbine as the output generator. Increase in the turbine inlet temperature is effective for making the gas turbine engine more efficient. The development tread of heat resisting materials for realizing higher temperature is shown. The current status and future aspect of the manufacturing technology is discussed for each main component of the engine. Technological development for decreasing weight is important because the weight of the fan member increases when the fan diameter is increased to increase the bypass ratio. FRP is adopted for the blades and casing to decrease the weight of the compressor, and studies have been made on fiber reinforced materials to reduce the weight of the disks. The outlines of the latest manufacturing technologies for the combustor and turbine are introduced. 2 refs., 9 figs.

How to proceed R and D effectively; Gijutsu kaihatsu no koritsutekina susumekata

Energy Technology Data Exchange (ETDEWEB)

Kawakita, Tetsuya [Ajinomoto Corp., Tokyo (Japan)

1999-07-05

They greatly divide R and D into next three in the enterprise, it is considered. (1) The goal-oriented basic research. (2) The applied research. (3) Technology development. Here, they try to want to consider the measure for efficient result sending out in technology development. It always considers that the largest effect is raised in research personnel who was limited in advancing technology development, it is observed in the standpoint for the operation management. The thought of Concurrent Engineering has already been taken in daily management, and it is had thing sure. In large wave of the internationalization, the high competition superiority is ensured in respect of the cost competitiveness, while the goal is clarified, and while it lectures on the means for overcoming the bottleneck. Responding to the expectation of the management by the further improvement in the technology development force believes not differing role of the engineer in the enterprise. (NEDO)

Demonstration technology development of new hydrogen energy; Shinsuiso energy jissho gijutsu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

A phenomenon of excess heat generation through the electrolysis of heavy water using palladium metals as electrode can be recognized as new hydrogen energy. Its mechanism has been investigated for four years since FY 1993. In FY 1993, the New Hydrogen Energy Demonstration Research Center and the New Hydrogen Energy Demonstration Laboratory were organized, and the research was initiated. For the excess heat generation demonstration model tests, two types of electrolysis experimental units were constructed, and the Pd/D-based electrolysis experiments were initiated. For the measurements of excess heat using an open type electrolysis cell, there were rather large errors ranging from -13% to +7%. It is necessary to improve the accuracy. For the measurements using a fuel cell type electrolysis cell, generation of the excess heat ranging from 0% to 6% was observed. For the validity of this, it is required to confirm the long-term stability of calibration and cell components. For the correlation between the increase in absorbing rate and the generation of excess heat, results of 2 to 3% lower were obtained. 28 refs., 89 figs., 26 tabs.

Development of advanced coal cleaning process; Kodo sekitan kaishitsu gijutsu no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

Osaka, S [Center for Coal Utilization, Japan, Tokyo (Japan); Akimoto, A; Yamashita, T [Idemitsu Kosan Co. Ltd., Tokyo (Japan)

1996-09-01

This paper aims to develop a clean coal production process which excellently removes environmental pollutant, is low-costed, and need no particular systems for distribution of products. The result of the development was described paying attention to column flotation which is a technology to high-efficiently select particulate regions, particulate heavy media cyclone, magnetic separation, and the basic design of the process into which those above were integrated. The two-stage selection process, which is an integration of column flotation and particulate heavy media cyclone into the conventional coal preparation equipment, can produce low-ash clean coal at high separation efficiency and also suppress the rise in processing cost. This process was also effective for removal of sulfur content and trace metal elements. The use of clean coal at power plant can be effective for not only the reduction in ash treatment amount, but the aspect of boiler operation characteristics such as heat transfer efficiency of boiler furnace wall, ash related troubles, loads of electrostatic precipitator, loads of flue gas desulfurization facilities. 17 figs., 5 tabs.

Trend of laser cutting technology; Laser setsudan gijutsu no saikin no doko

Energy Technology Data Exchange (ETDEWEB)

Murai, T. [Mitsubishi Electric Corp., Tokyo (Japan)

1997-10-05

Recent trend of CO2 laser cutting is described. The cutting speed has increased five times in these seven years, and cutting is now performed at 8m/min for a hole that satisfies a circularity of 50{mu}m. In the low-speed domain, again, cutting accuracy is as high as 20{mu}m. In the cutting of thick plates, laser encounters some difficulties, which include the increased thermal load on optical parts and devices in the oscillator, lessened cutting condition tolerance, variation in the accuracy of products, difficult cutting, etc. Discussed in this report are measures for correcting factors affecting product quality with reference taken to a thick soft steel plate. A laser beam emitted by an oscillator is condensed by and projected through a condenser lens, and the condensing capability is affected by various factors, such as the beam mode order, beam diameter, and focal length, etc. What is important is to find out the optimal conditions. The assist gas has to satisfy certain conditions because it assumes an important role in controlling the discharge of molten metal from cut grooves, heat generated by oxidation reaction, and cooling. The properties of the material to be cut also exert some influence. In the case of thick plate cutting, the cutting capability is governed by the geometry to be fabricated. Also employed for the prevention of poor jobs due to improper condition switchover and cutting routes is an optimal cutting condition control technique. 3 refs., 12 figs.

High power YAG laser cutting; Koshutsuryoku YAG laser ni yoru setsudan gijutsu

Energy Technology Data Exchange (ETDEWEB)

Owaki, K. [Ishikawajima-Harima Heavy Industries Co. Ltd., Tokyo (Japan)

1998-08-01

This paper describes features of high power YAG cutting. The optical fiber transmission YAG laser machining system has some advantages in which optical path length compensation unit is not required and measures for low power loss and dust are not required, when compared with the CO2 laser system. Its application to the cutting of stainless steel plates has attracted attention. Cutting tests of SUS304 were conducted using high power YAG laser. Cutting of SUS304 plate with a thickness of 40 mm could be successfully done at the power of 3.5 kW. Cutting tests of SUS304 pipes with a thickness of 8 mm in water under the depth of 20 m were also conducted using air as assist gas at the power of 2.5 kW. Excellent results were obtained without scale deposition. For the tests by the composite beam using 3 kW and 4 kW systems, SUS304 plate with a thickness of 50 mm could be cut at the cutting speed of 0.1 m/min. Laser cutting of pipes from the internal surface was conducted using a newly developed small machining head which can rotate in the peripheral direction. Excellent quality for welding was confirmed. Cutting speed and plate thickness were improved by combining water jet cutter and YAG laser unit. 6 refs., 10 figs.

Prospect of concrete technology; Kenchiku ni okeru korekarano konkurito gijutsu no tenbo

Energy Technology Data Exchange (ETDEWEB)

Suzuki, Tadahiko [Shimizu Corp., Tokyo (Japan)

1999-10-10

The privatization of state-owned companies, the abolition of the protectionism to domestic industries and the market liberalization, deregulation to the economic activities or movement to abolition of regulation were concretely made a start. Moreover, the reform of the social life was also requested with an increasing of international global environmental preservation. These reform influences in the construction industry have been affected and could not ignored in consideration of the development in the 21st century. In this paper, the summary of reform in development, construction industry; especially the correspondence in the construction industry and the relation to concrete technology from now were described. Especially, concerning establishment of concrete technology, it was given as the construction of the safe and comfortable space, highly production technical development, countermeasures to resource-saving and environmental preservation, search of new concrete materials, development of the renewal technology and correspondence to large project. (NEDO)

History of technological activities of Japanese industry; Sangyo gijutsu rekishi keisho chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

History of technological activities of Japanese industry has been recorded, preserved, compiled and systematized. The purpose is to make international contribution by transmitting Japanese experience and knowledge to the world, and to bring up the human resource for researches by teaching the history of passion and efforts of the predecessors and by arousing interests and creative volitions of science and technology of young persons. However, memorial matters, data and witnesses relating to the history of industrial science and technology are rapidly being lost day by day. When leaving as it is, succession of the history to next generation becomes hard. Under such a situation, basic survey has been conducted to succeed the history of industrial science and technology and promote the creative utilization of them. This is in the third stage of the survey. This report contains the development of new cold rolled steel sheet for cars, plant engineering technology in Mitsubishi Heavy Industries, electronics, electric power distribution technology in Kansai Electric Power Co., Inc., development of the PAN carbon fibers, four cycle and low speed marine diesel engines, production of electrolytic copper foil, development of jet engines, camera makers, and production of office machinery. 86 refs., 12 figs., 9 tabs.

Generic supercritical water technology; Generic technology to shite no chorinkaisui riyo gijutsu

Energy Technology Data Exchange (ETDEWEB)

Arai, K; Ajiri, M; Inomata, H; Smith, R; Hakuta, Y [Tohoku University, Sendai (Japan). Faculty of Engineering; Yokoyama, C [Tohoku University, Sendai (Japan). The Institute forChemical Reaction Science; Chin, L [New Energy and Industrial Technology Development Organization, Tokyo, (Japan)

1997-02-01

This paper describes the measurement and analysis for clarifying solution structure of supercritical water and exhibition mechanism of solvent functions. It also describes the development of new processes using supercritical water as reaction solvent. The PVT measurements were conducted in the supercritical region using pure water and NaCl aqueous solution, to confirm the reduction of molar volume of the electrolyte solution. The hydration structure was examined in the supercritical aqueous solution by the molecular dynamic simulation. As a result, presence of hydrogen bond structure, where the contribution of two branching hydrogen bond can not be ignored, was suggested under the supercritical condition. Characteristics of supercritical aqueous solutions are analyzed through in-situ Raman and scattered X-ray spectral measurements. Moreover, this paper introduces developments of some processes in the supercritical water, such as decomposition of wasted polymers, recovery of chemical materials, reforming of heavy hydrocarbons by contact hydrogenation, and synthesis of fine powders of metal oxide by reaction crystallization.

Demonstration technology development of new hydrogen energy; Shinsuiso energy jissho gijutsu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

This report describes results of the study on the excess heat generation phenomenon during the electrolysis of heavy water using palladium metals as electrode in FY 1995. For the measurements of excess heat using an open type electrolysis cell during the excess heat generation demonstration model tests, significant excess heat beyond the range of input was not measured both for ICARUS-1 and for ICARUS-2. For the measurements using a fuel cell, high absorbing rate more than 0.85 was stably achieved for highly pure Pd electrode material by heat treatment and surface treatment. The excess heat could be reproduced for plural tests. The heat recovery rate more than 98% was obtained using the NHE type flow calorimetric system. The excess heat measurements using this are examined. For the reactive palladium materials, various materials ranging from single crystal to cold working polycrystal materials were systematically used for the absorbing experiments. Benchmark tests were also conducted through the cooperation with related researchers. 18 refs., 135 figs., 28 tabs.

NEDO Forum 2000. Industrial technology development session; Sangyo gijutsu kenkyu kaihatsu session

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-09-01

This session presented the following subjects: I. IT innovation, II. Bio-seminar, III. Nano-technology, IV. Machine technology seminar, and V. 'Development subsidy project to put industrial technologies into practical use'. The theme in I relates to (1) influence of IT innovation on the society, (2) the theory of semiconductor evolution, (3) the theory of liquid crystal evolution, and (4) the theory of disk evolution. The theme II searches (1) how far have bio-technologies come?, (2) search of human evolution from genes, (3) can human being live up to 150 years by bio-technologies?, and (4) what is a DNA array (chip)?. The theme III covers (1) product innovation in polymers (new polymeric materials brought about by polymer nano-technology, taking polyolefin as an example), and (2) creation of ceramics materials by using nano-technologies. The theme IV relates to (1) ITS changes the car society into this way, (2) the current status and outlook on research and development of micro-machine technologies, and (3) the futuristic society and new industries opened by the Humanoid project. The theme V describes (1) practical application of ultra-small medical device production technologies, (2) development of next generation semiconductor manufacturing resists, (3) development for practical application of an optical brain function imaging device, and (4) development for practical application of new screening technologies toward creation of medicines using genome. (NEDO)

Fiscal 1997 report on technological results. R and D on micromachine technology (Development of micro-factory technology); 1997 nendo micromachine gijutsu no kenkyu kaihatsu seika hokokusho. Microfactory gijutsu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Activities are conducted in search of a micromachine system in which devices and equipment relating to machining, assembly, transportation, inspection, etc., in use for a manufacturing process are integrated in a narrow space, for the purpose of conserving energy through the miniaturization of the process of manufacturing small industrial products. With the activities in the two fields of (1) R and D of systematization technology (experimental system for micro fabrication/assembly) and (2) comprehensive investigation and research, examination on detailed specification for the experimental system was carried out, as were the examination of element technologies, element device operating experiments, technological investigation, etc.. In (1), sophistication of the element technologies was contrived that were required for realizing each experimental system, while the detailed specification of each experimental system was decided. Further, a part of the element devices was experimentally manufactured, with the basic functions verified. In (2), research studies were compiled on radio interference for example in the case where various devices were integrated and highly densified through the formation of a micro-factory; also compiled was a joint research with Agency of Industrial Science and Technology, a research conducted for the purpose of building the conception of the micro-factory. (NEDO)

Fiscal 2000 research report on the research on materialss with functions enhanced by microcapsulation technology; 2000 nendo microcapsul ka gijutsu ni yoru kokinoka zairyo gijutsu no chosa kenkyu hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Research is conducted to create materialss equipped, thanks to microcapsulation, with a noise stopping function, vibration damping function, moisture adjusting function, electromagnetic shielding function, and the like, and usable as structural elements as is, that is, materialss known as 'interactive materialss.' For the development of an interactive materials, it is important to incorporate an element, which interacts with external energy, into the materials. A system using interactive materialss when embodied will ensure a safer and more comfortable daily life space. Taking this into consideration, in this fiscal year, studies are made about the technical representation of problems and troubles that jeopardize the safety and comfort of the daily life space, establishment of standards in this connection, interactive features to be realized using microcapsules, possibility of novel interactive characteristics using the same, techniques for the systematization of microcapsules as industrial materialss, techniques for assessing and analyzing materialss characteristics, simulation or the like of a safe and comfortable space using interactive materials-aided systems, and so forth. (NEDO)

NEDO Forum 2001. Session on industrial technology development (Future of thing making and manufacturing/processing technologies); NEDO Forum 2001. Sangyo gijutsu kaihatsu session (monozukuri seisan kako gijutsu no mirai)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-09-20

The presentations made at the above-named session of the NEDO (New Energy and Industrial Technology Development Organization) forum held in Tokyo on September 20, 2001, are collected in this report. In a lecture entitled 'History of thing making,' the roles played by the now-defunct National Testing Laboratory and Industrial Test and Research Center were described and strategy for future development was predicted. In a lecture entitled 'Thing making and international apprentices competition,' apprenticeship training in practice at Denso Systems Corporation was presented. In a lecture entitled 'Key technology in thing making: outlook of metal mold industry,' shift in Japanese manufacturers' paradigm and change in metal mold marketing were explained, and the importance of reaching for the first position in the world in some specific fields or of expanding the scope of work in the entire value chain was stressed. In a lecture entitled 'Digital meister project: Aiming at amalgamation of IT (information technology) and MT (manufacturing technology),' database construction in the manufacture of metal molds, introduction of knowledge management systems, and development of CAD/CAM/CAE (computer-aided design/computer-aided manufacturing/computer-aided engineering) were discussed. (NEDO)

Technology for bonding silicon nitride ceramics. Heat treatment technology to improve diffusion bonding strength; Chikka keiso ceramics no setsugo gijutsu. Kakusan setsugo kyodo kaizen no tame no metsushori gijutsu

Energy Technology Data Exchange (ETDEWEB)

Nakamura, M.; Shigematsu, K. [National Industrial Research Institute of Nagoya,Nagoya (Japan)

1999-01-25

Silicon nitride ceramics is a structural ceramics with excellent high temperature strength and tenacity, being expected of expansion of application as a high temperature material. However, its processibility is poor, and special sintering technique is required to manufacture members of complex shapes. Therefore, development has been made on a technology to manufacture bonded materials with high mechanical strength, by which diffusion bonding in high temperature nitrogen gas and heat treatment are combined, and crystalline structure in the vicinity of bonding interface is controlled. (translated by NEDO)

Achievement report for fiscal 1996 on the research and development of micromachine technology. Development of microfactory technology; 1996 nendo micromachine gijutsu no kenkyu kaihatsu seika hokokusho. Microfactory gijutsu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

The goal is to save energy and minimize the working space by constructing a manufacturing system comprising various micromachines with their dimensions fit for parts and products they handle. Development continues relative to microprocessing (electrolysis, and optical processing) and microscopic liquid operation (micropump, and part holding device). Under research in relation to the assembly process are a micro-arm to handle tiny parts and precision techniques for interfitting within a very small microfactory, a piezoelectric actuator for microscopic position adjusting, and ultraprecise microprocessing techniques indispensable for their manufacture. Also under research are the incorporation of optically driven microdevices developed before the preceding fiscal year into a microfactory and the study of microservo actuators capable of sophisticated positioning and velocity control. Concerning the microscopic transport system to deal with microscopic parts and products, studies are under way so as to embody systems driven by actuators of the electromagnetic type and electrostatic type. In this paper, reference is made to inspection techniques and comprehensive investigations. (NEDO)

FY 1999 report on the results of the R and D of high efficiency clean energy vehicles; 2000 nendo choteisonshitsu denryoku soshi gijutsu kaihatsu seika hokokusho. Kiban gijutsu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Using the petroleum substituting clean energy, the R and D were conducted with the aim of developing vehicles which reduce the consumption of travel energy to 1/2 and the CO2 emission to 1/2 or below of those of existing vehicles. The FY 1999 results were summed up. As to the R and D of the hybrid power system, carried out were the prediction of fuel consumption performance by numerical simulation, evaluation of performance of new hybrid electric vehicles, etc. Concerning the R and D of high efficiency clean energy vehicles, the R and D of the following were reported from each of the makers: hybrid passenger car loaded with methanol fuel cells, hybrid passenger car loaded with ANG engine, hybrid truck loaded with CNG ceramic engine, hybrid truck loaded with CNG engine, hybrid bus loaded with LNG engine, and hybrid bus loaded with DME engine. Further, in the survey of synthetic fuels, the paper reported on the results of the evaluation of synthetic light oil engines and evaluation of characteristics of synthetic light oil. (NEDO)

Report on evaluation/selection surveys on coal species, processes and others; Tanshu process nado hyoka sentei chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1981-03-01

This program analyzes the applicable coal species centered by Australia's Victoria brown coal and Chinese coal, which are promising alternative fuel sources for Japan for their reserves, prices, availability, suitability for liquefaction, etc, in order to clarify the possible problems, and commercialize the liquefaction techniques in the early stage. This report consists of 6 chapters. Chapter 1 describes development situations of brown coal, specifically for Australia's Victoria brown coal and Chinese coal. Chapter 2 describes characteristics of the reactions involved in the brown coal liquefaction. Chapter 3 describes current status of various liquefaction processes (solvolysis, solvent extraction, direct hydrogenation and C-SRC) under development in Japan, and problems involved in their future developments. Chapter 4 describes current status of the elementary techniques, e.g., those for slurry pretreatment (e.g., dehydration and crushing), solid/liquid separation, secondary hydrogenation, product upgrading and gasification. Chapter 5 describes the related techniques, and Chapter 6 discusses the demonstration survey results of de-ashing, primary/secondary hydrogenation, and dehydration of brown coal. (NEDO)

Report on evaluation/selection surveys on coal species, processes and others; Tanshu process nado hyoka sentei chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1981-03-01

This program analyzes the applicable coal species centered by Australia's Victoria brown coal and Chinese coal, which are promising alternative fuel sources for Japan for their reserves, prices, availability, suitability for liquefaction, etc, in order to clarify the possible problems, and commercialize the liquefaction techniques in the early stage. This report consists of 6 chapters. Chapter 1 describes development situations of brown coal, specifically for Australia's Victoria brown coal and Chinese coal. Chapter 2 describes characteristics of the reactions involved in the brown coal liquefaction. Chapter 3 describes current status of various liquefaction processes (solvolysis, solvent extraction, direct hydrogenation and C-SRC) under development in Japan, and problems involved in their future developments. Chapter 4 describes current status of the elementary techniques, e.g., those for slurry pretreatment (e.g., dehydration and crushing), solid/liquid separation, secondary hydrogenation, product upgrading and gasification. Chapter 5 describes the related techniques, and Chapter 6 discusses the demonstration survey results of de-ashing, primary/secondary hydrogenation, and dehydration of brown coal. (NEDO)

FY 1999 report on the survey of the history/inheritance of industrial technology. Survey of the inheritance/education of technology in museums of industrial technology in Japan; 1999 nendo sangyo gijutsu rekishi keisho chosa hokokusho. Kokunai sangyo gijutsu hakubutsukan ni okeru gijutsu keisho keihatsu chosa hen

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

For the purpose of clarifying the course of promotion of the original/creative future R and D and contributing to selection of technical themes and working-out of developmental methods, survey was conducted paying visits to museums of industrial technology in Japan which evaluate/preserve/exhibit/utilize memorial goods, data, information pertaining to the industrial technology in Japan. Museums for survey were the following ten: Chiba Museum of Science and Industry; Garasu no Sato (Glass Village); Maizuru World Brick Museum; Museum of Industrial Technology; Numata Memorial Hall/Mitsutoyo Museum of Dimensional Metrology; Omachi Energy Museum; Sake Museum; Saint Juan Bautista Museum; Subway Museum; Textile Museum Yukari. One of the points of this survey was to survey the actual state of the experimental type exhibition. The experimental type exhibition, which is wide in sphere, seems to be effective since visitors can operate it, simulate it, feel its size and make scientific experiments. However, the museums are not necessarily satisfied with the present situation. (NEDO)

Fiscal 1998 research achievement report. Project for developing key technologies for electronic devices (Projection X-ray exposure process technology and active reflective device structure technology); 1998 nendo denshi device kiban gijutsu kaihatsu jigyo seika hokokusho. Shukusho X sen roko process gijutsu to active hansha kozogata keisei gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-05-01

Studies were conducted for the development of technologies of the very advanced level relating to an ultrafine machining process and high-performance reflector type liquid crystal display structure formation. Studied in the research and development of projection X-ray exposure process technology were multi-layer film formation, absorbing body film formation, absorbing body machining, multi-layer film mask defect evaluation, and cleaning for defect reduction. As the result, multi-layer film formation by Helicon sputtering and formation and machining of film with Ta acting as absorbing body therein were carried out, and it was found by actual exposure experiments that there were excellent X-ray reflectivity and absorbing body contrast. Furthermore, a study was made of cleaning using dummy foreign matters, and 100% removal of dummy foreign matters was achieved across a range up to the 70nm level. Studied in the development of active reflective device structure technology were the addition of an electrical control function to the reflector, addition of an unreflected rays absorbing function, production of a bias stabilized device for the practical application of a memory function, and the development of materials for the fabrication of the said devices. (NEDO)

Achievement report for fiscal 1997 on development of technologies for practical photovoltaic system under New Sunshine Program. Manufacture of thin-film solar cell / low-cost and large-area module / next-generation thin-film solar cell (Manufacture of thin-film polycrystalline solar module); 1997 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Usumaku taiyo denchi no seizo gijutsu kaihatsu, tei cost daimenseki module seizo gijutsu kaihatsu, jisedai usumaku taiyo denchi no seizo gijutsu kaihatsu (usumaku takessho taiyo denchi module no seizo gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Fiscal 1997 is the first year of another 4-year-long research and development phase. In addition to researches for improving on thin-film polycrystalline Si cell efficiency that have been under way, new efforts are started, which include the development of practicality-conscious thin film producing technologies aiming at higher throughput and yield and the development of modularization process technologies which are necessary for putting thin-film cells to practical use. Concerning the formation of a power generation layer on a polycrystalline Si thin film formed by the ZMR (zone-melting recrystallization) process, studies are conducted for improvement on its throughput and yield using a new CVD (chemical vapor deposition) unit. A method of modularization is evaluated, which involves a laminate of a thin-film cell attached to a resin-coated, reinforced glass substrate and an EVA (ethylene vinyl acetate) back film. A remarkable achievement is earned toward the practicalization of technologies of thin film formation enhanced in quality and throughput and technologies of thin film modularization. (NEDO)

Concluding Remarks; Zaklyuchitel'noe slovo

Energy Technology Data Exchange (ETDEWEB)

Budker, G. I. [Institute of Nuclear Physics, Siberian Department of the USSR Academy of Sciences, Novosibirsk, Union Of Soviet Socialist Republics (Russian Federation)

1969-01-15

I feel that the changes which have taken place in science in the last few years open up new possibilities, about which I should like to say a few words. In 1951 we began work on thermonuclear reactions in the confident belief that we would solve the problem with a rush and immediately. I was assigned the task of ensuring that our future thermonuclear reactor would not get too much out of hand. It was like the story of the man who wished to invent a perpetual motion machine and had taken out a patent on a method for keeping it under control. This attitude stemmed from the successes in developing ''explosive thermonuclear reactors'', a task which was achieved within a very short period of time, leaving physicists with the impression that they could do everything - and do it fast. However, experience soon showed that here we had a scientific rather than a technological problem and that it would be necessary to study in detail the physics of plasmas - which we have now been doing for over ten years. [Russian] Mne kazhetsja, chto za poslednie gody- v nauke proizoshli izmenenija, otkryvshie novye vozmozhnosti, na kotoryh ja hotel by ostanovit'sja. Ja hochu napomnit', chto v 1951 godu my nachali raboty po fizike plazmy i termojadernym reakcijam. U nas byla uverennost', chto my reshim jetu problemu s hodu, srazu. Mne bylo porucheno obespechivat' regulirovanie budushhego termojadernogo reaktora, chtoby tot ne ochen' ''razognalsja'' i ne vyshel iz-pod kontrolja. Sejchas jeto poruchenie napominaet istoriju o tom, kak odin hotel izobresti vechnyj dvigatel' i vzjal patent na to, chtoby tot ne razgonjalsja do beskonechnyh skorostej. . . Bol'shie uspehi v razrabotke ''vzryvchatyh termojadernyh reaktorov'', kotorye byli sozdany za ochen' korotkoe vremja, porodili u fizikov uverennost' v to, chto oni mogut sdelat' vse i sdelat' bystro. Odnako ochen' skoro zhizn' pokazala, chto jetim delom nuzhno zanimat'sja ne kak konstruirovaniem, a kak naukoj, chto nado razvivat' plazmennuju

Atividade farmacológica do extrato hidroetanólico liofilizado de caule de Kielmeyera coriacea em ratos - DOI: 10.4025/actascihealthsci.v26i2.1591 Activity of hydroethanolic extract from Kielmeyera coriacea stems on central nervous system in rats - DOI: 10.4025/actascihealthsci.v26i2.1591

Directory of Open Access Journals (Sweden)

Diógenes Aparício Garcia Cortez

2004-04-01

Full Text Available O objetivo deste estudo foi investigar as propriedades psicotrópicas do extrato hidroetanólico liofilizado obtido de caule de Kielmeyera coriacea após tratamento agudo ou crônico por via oral (gavagem em ratos. As atividades ansiolítica, antidepressiva e estimulante de sistema nervoso central, foram avaliadas através da utilização dos testes do labirinto em cruz elevado (LCE, nado forçado (NF e campo-aberto (TCA, respectivamente. A administração crônica de EH de caule de Kielmeyera coriacea (60.0 mg/kg produziu redução no tempo de imobilidade no teste do NF, comparável a imipramina (20.0 mg/kg, sem aumentar a atividade locomotora no TCA. A dose de 120.0 mg/kg do mesmo extrato aumentou significativamente a percentagem de entradas nos braços abertos no teste do LCE após administração aguda. Estes resultados mostram que EH de caule de Kielmeyera coriacea apresenta perfil de composto ansiolítico e antidepressivo.The aim of the present study was to investigate psychotropic properties of the crude lyophilized hydroethanolic extract (HE from Kielmeyera coriacea stems after acute or chronic administration by oral route (gavage in rats. Anxiolytic, antidepressive and psychomotor stimulant effects were evaluated using Plus-Maze (PMT, Forced Swimming (FST and Open Field (OFT test experimental models, respectively. Evaluation of the extract stems (60.0 mg/kg revealed decreased immobility time in the forced swimming test (FST, without increasing locomotor activity in OFT, after chronic administration. This effect of the extract was compared with imipramine (20.0 mg/kg. Acute administration of 120.0 mg/kg of extract stems increased the open arm entries percentage in the PMT. According to the results, Kielmeyera coriacea stems extract is effective as anxiolytic as well as an anti-depressive-like drugs.

Report on the results of research and development under a consignment from NEDO of glycoconjugate production utilizing technologies. Development of technologies to fix and effectively utilize carbon dioxide by applying glycoconjugates; 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Fukugo toshitsu seisan riyo gijutsu no kenkyu kaihatsu (fukugo toshitsu oyo nisanka tanso koteika yuko riyo gijutsu kaihatsu) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

This paper reports research results in fiscal 1997 for the `research and development of glycoconjugate production utilizing technologies`. In synthesizing, utilizing and remodeling technologies for glycoconjugates by means of chemical synthesis, studies were performed on developing methods to synthesize Gal {beta}1-3Gal NA(c {alpha})1-0-Serine in preparative scale, synthesizing high mannose type sugars of natural type without protection groups, and linking GlcNA or GalNAc onto partial peptide of fibroblast growth factor (FGF). In synthesizing, utilizing and remodeling technologies for glycoconjugates by using biological methods, studies were carried out, with regard to glycoconjugate synthesizing, utilizing and remodeling technologies utilizing animal cells, on identifying sugar structures of IFN-{gamma} produced from CHO cell line, and isolating CHO cell lines introduced with genes of sugar transferred enzyme GnTIV and/or GnTV. Furthermore, studies were conducted on glycoconjugate synthesizing, utilizing and remodeling technologies utilizing microorganisms, and glycoconjugate structure analyzing technologies. In addition, overall investigation was made on glycoconjugate production utilizing technologies. 113 refs., 76 figs., 18 tabs.

Achievement report for fiscal 1997 on development of technologies for practical photovoltaic system under New Sunshine Program. Manufacture of thin-film solar cell and of low-cost/large-area module (Formation of low-temperature film); 1997 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Usukau taiyo denchi no seizo gijutsu kaihatsu, tei cost daimenseki module seizo gijutsu kaihatsu (teion maku keisei gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

A polycrystalline Si thin film formation technology is developed, which uses the flux process in which a reaction occurs between the target crystal and a flux component which is eutectic. Using this process, a crystal grain relatively large in diameter is obtained at a relatively low temperature. This method is now attracting attention as one of the technologies for producing crystalline Si film for use in thin-film polycrystalline Si solar cells. Especially when Al is used for flux, since Al is automatically doped into the target crystalline Si film, it is expected that the resulting film will serve as the ground for a photoactive layer provided with the BSF (back surface field) function which is important for the improvement of solar cell efficiency. A polycrystalline Si thin film is formed on a 2cm times 2cm-large glass substrate at a temperature not higher than 600 degrees C. It is recognized that films selectively oriented towards the (111) or (100) plane are acquired when other processes are employed. It is expected that the said Al-doped film provides a ground on which a BSF function-provided photoactive layer will be formed. (NEDO)

Report on achievements in fiscal 1998. Development of useful substance production technology utilizing gene combination technology; 1998 nendo idenshi kumikae gijutsu wo riyoshita yuyo busshitsu seisan gijutsu kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

In developing a useful substance producing technology utilizing gene combination technology, plants are taken as a kind of useful substance producing arena, wherein useful protein genes of animals are introduced and manifested in the plants. Thereupon, technological development was carried out for the following items with regard to mass production of useful substances that can be utilized industrially, such as cytokine, by means of plant and cell cultivation: 1. Development of a useful substance producing technology utilizing gene combination technology, and 2. Comprehensive surveys and researches. For the technology to obtain and design useful substance producing genes originated from animals, development of a technology to search and acquire useful genes originated from animals, and a design and modification technology for useful genes. For the technology to introduce genes into gene combined plants, creation of plants combined with useful substance producing genes, and development of an introduction technology using plant virus vector. For the technology to produce high-function chemical substances in the gene combined plants, establishment of technologies for mass breeding and activity analysis of gene combined plants and cultivated cells, and for extraction and refinement of useful substances from the gene combined plants. In the comprehensive surveys and researches, technologies were surveyed and items of information were collected inside and outside the country. (NEDO)

Fiscal 1999 leading research report. Research on advanced functional material technology based on micro- capsule technology; 1999 nendo micro capsule ka gijutsu ni yoru kokinoka zairyo gijutsu no chosa kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Study was made on production technology of the 5th- generation material 'eco-smart composite structure' based on micro-capsule technology. This material ought to have an intelligent function including self-detection and self- restoration of defects, environmental harmony, high strength and long life. At present, these demands are implemented by embedding a sensor, actuator and controller in structure, or optical fiber, shape memory alloy and computer chip in matrix, however, such complex material structure has adverse effect on environment. On the other hand, single structure material such as biodegradable polymer is unusable in severe environment such as the ocean and space. These problems can be resolved by combining composite material and micro-sphere technology, for example fiber-reinforced plastic (FRP) composite structure including micro-capsules with nano particles. According to targets, this material can have a self-restoration intelligent function, and other environment friendly functions such as easy decomposition, sound insulation, oscillation damping, electromagnetic shielding and hygroscopicity. (NEDO)

Fiscal 1999 leading research report. Research on advanced functional material technology based on micro- capsule technology; 1999 nendo micro capsule ka gijutsu ni yoru kokinoka zairyo gijutsu no chosa kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Study was made on production technology of the 5th- generation material 'eco-smart composite structure' based on micro-capsule technology. This material ought to have an intelligent function including self-detection and self- restoration of defects, environmental harmony, high strength and long life. At present, these demands are implemented by embedding a sensor, actuator and controller in structure, or optical fiber, shape memory alloy and computer chip in matrix, however, such complex material structure has adverse effect on environment. On the other hand, single structure material such as biodegradable polymer is unusable in severe environment such as the ocean and space. These problems can be resolved by combining composite material and micro-sphere technology, for example fiber-reinforced plastic (FRP) composite structure including micro-capsules with nano particles. According to targets, this material can have a self-restoration intelligent function, and other environment friendly functions such as easy decomposition, sound insulation, oscillation damping, electromagnetic shielding and hygroscopicity. (NEDO)

FY 1999 report on the study of the future course, etc. of 'the basic survey for promotion of Joint Implementation, etc.'; 1999 nendo 'kyodo jisshi nado suishin kiso chosa' no kongo no hokosei nado ni kansuru kento chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

The paper conducted the demonstration of the multiplier effect of 'the model project for heightening of the international energy consumption efficiency, etc.' carried out by NEDO and its subsidiary project, 'the project on the basic survey for promotion of Joint Implementation (JI),' and the comparative study between these projects and the JI/CDM projects proposed in the world. In the quantitative evaluation of the multiplier effect, in the case of making the demonstration of the same technology in the same area both in the model project and the basic survey for promotion of JI, it becomes possible to grasp the CO2 reduction effect with high accuracy, but the CO2 reducible amount is small. Inversely, as to the technology for which the basic survey for promotion of JI is studied, but the model project is not carried out, it becomes possible to grasp the CO2 reduction effect with low accuracy, the CO2 reducible amount is large. In the comparison with the JI/CDM projects proposed in the world, the CO2 reduction amount was approximately $2.7 billion, 250 million tons, in the UNFCCC project, and approximately $5.0 billion, 500 million tons, in the IJ project. There was no very big difference in the cost effect. (NEDO)

FY 2000 report on the basic survey to promote Joint Implementation, etc. Prevention of emissions of gasoline vapor from oil depots in Indonesia; 2000 nendo kyodo jisshi nado suishin kiso chosa hokokusho. Indonesia sekiyu kichi nado kara no gasoline joki hoshutsu no boshi

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

A field survey was conducted of oil shipment depots in Java and Bali islands owned by Indonesia's state-run oil company to study measures for reduction in greenhouse effect gas emissions. Studies were made on the grasp of the amount of the hydrocarbon vapor emitted into the air, the amount of the gasoline recovered in case of adopting the vapor emission preventive technology, equipment cost/operational cost, etc. Concretely, the following three were studied: change of the gasoline storage tank to the inner floating roof type, and prevention of evaporation loss at the time of receiving and breathing loss caused by temperature changes; replacement with the vapor recovery type loading arm to recover gasoline vapor generated at the time of shipment/filling, and installation of the vapor recovery unit to recover vapor as gasoline; vapor balance system to recover in underground tank the gasoline vapor generated at the time of filling gasoline at gas station. As a result of the study, the recovered gasoline amount was 66,393 Kl/y and the CO2 reduction amount was 14,474 t/y at oil shipment depots and approximately 650 gasoline stations in Jakarta and Surabaya. (NEDO)

Report on the achievements in the Sunshine Project in fiscal 1988. Development of a collection and processing system for data of the coal liquefaction process; 1988 nendo sekitan ekika process nado no data no shushu, shori system nado no kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1989-03-01

Storing and managing comprehensively a huge amount of data acquired in developing the coal liquefaction technologies would greatly contribute to moving forward the development of the coal liquefaction technologies, and realizing a commercial plant being the ultimate goal. It is intended to investigate the current status of information management systems used for development projects being implemented or planned in developing the coal liquefaction technologies. It is also intended to structure a coal liquefaction database system to utilize comprehensively and effective the information discovered by the above investigation. The current fiscal year has performed developments on the following items to structure a coal liquefaction database system by using a computer: (1) conceptual design of the fundamental database, and (2) basic design on a general technological information retrieval system. The development during the current fiscal year established a method to classify levels of data accommodation for the fundamental database based on the investigation and analysis of the experimental data. In addition, with regard to the general technological information retrieval system, summarization was performed on the specifications of the hardware and software, the basic configuration, the input and output specifications, and the retrieval screens. (NEDO)

Hydrogen utilization international clean energy system technology (WE-NET). Subtask 8. Development of hydrogen combustion turbines (development of the main component devices such as turbine blades and rotors); Suiso riyo kokusai clean energy system gijutsu (WE-NET). Subtask 8. Suiso nensho turbine no kaihatsu (turbine yoku, rotor nado shuyo kosei kiki no kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

The paper described the result of the fiscal 1996 development relating to hydrogen combustion turbines, as one of the hydrogen utilization technologies, which have excellent environmentality and are expected of remarkably high efficiency. In the film cooling system of first-stage moving/stationary blades, the smaller the pitch of film pore is, the higher the mean cooling efficiency becomes, indicating 0.7 at maximum. As compared with the conventional shower head type, the metal temperature can be reduced 30-40degC. In the recovery type inner (convection) cooling system, by reducing the blade number, the consumption amount of coolant can be reduced 6% in stationary blade and 13% in moving blade, as compared with the result of the preceding year. In the element test of the hybrid cooling system, film cooling efficiency was actually measured by the porous module test equipment, and the result well agreed with the calculation result. In the water cooling system, studied were water (stationary blade) and vapor (moving blade) of the closed cooling structure for realization of a cycle efficiency of 60%. In rotor/disk cooling, analyses were made of seal characteristic grasp tests and characteristics of the rotor. The effect of deflection in the mainstream was small. Besides, proper value of the seal overlapping amount could be obtained. 6 refs., 368 figs., 55 tabs.

FY 2000 report on the results of the technology development of energy use reduced machine tools, etc. Development of the linear motor system for realization of energy conservation and commercialization; 2000 nendo energy shiyo gorika kosaku kiki nado gijutsu kaihatsu seika hokokusho. Shoeneka to jitsuyoka wo jitsugensuru linear motor system no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

In relation to the drive system of machine tools widely used as production facilities for automobiles, home electric appliances, etc., the R and D were made of a high efficiency linear motor system of which attention was paid to energy rationalization and environmental loads, and the FY 2000 results were summed up. In the study of the development of the system, studies were made not only on the lowering of heating, cost reduction and heightening of speed, but on the mechanism and control by which machine natural vibration can relatively be cut off, technology of damping for cutting vibration, technology to meet the deformation, etc. by cutting loads, sliding loads, and acceleration of accelerating/decelerating, technology to reduce the machine weight, etc. In the study of the basic technology of linear motor, the finite element method analysis was conducted on the typical linear motor. Concerning the control system, specs were studied which can deal with natural vibration and cutting vibration of the machine system. As to the development of the steel scale type linear encoder, scale sample for evaluation of basic characteristics was designed/trially manufactured. In the study of the detection optical system, the design/trial manufacture of photodiode array were made. (NEDO)

Achievement report for 1st phase (fiscal 1974-80) Sunshine Program research and development - Hydrogen energy. Research on hydrogen production technology using thermochemical process (Research on cycles of Fe systems etc.); 1974-1980 nendo suiso energy seika hokokusho. Netsu kagakuho ni yoru suiso seizo gijutsu no kenkyu (tetsukei cycle nado no kenkyu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1981-03-01

Collected in this report are the results of efforts of the Government Industrial Research Institute, Osaka, in the 7-year period that began in fiscal 1974. The Institute, after looking for basic reactions in thermochemical cycles which are promising, has come to propose a new cycle in which iron and bromine are the reactants. In the research, the Fe-Br reaction is divided into a hydrogen generating loop and an oxygen generating loop, both to be developed into devices. Problems in developing them into a cycle are isolated, and solved. In the hydrogen generating loop, the use of a molten salt is contrived for the prevention of reduction in the reactivity of the Fe{sub 3}O{sub 4} to be generated, and now it is expected that the problem will be solved. No problem is detected in the oxygen generating loop. The process is now accepted as a superb one. As for the materials for the Fe-Br-based cycle apparatus, important tasks have to be undertaken since existing materials cannot be used as is. Besides, thermal efficiency etc. are estimated for a new As-Br-based hybrid cycle and the Fe-Br-based cycle. (NEDO)

FY 1999 survey report on the survey on the role and course of the development of technology such as CO2 recovery, fixation and effective use in the industrial policy; 1999 nendo CO{sub 2} kaishu koteika yuko riyo nado gijutsu kaihatsu no sangyo seisakujo no ichizuke oyobi hokosei ni kansuru chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This paper aims at arranging and assessing the role of themes of the technology development such as CO2 recovery, fixation and effective use in the industrial policy and the results of the development. It also aims at analyzing factors to hinder technology development in comparison with the developmental trend of technology and the role in the industrial policy in foreign countries and at considering the future role in the industrial policy and the course to be taken. Judging from the number of projects and a variety of fields of technology, it could be said that the development of the related technology in Japan is at a top level the same as that in the U.S. In the present conditions, however, most of the technologies are at the stage of the basic research. In many of the research fields except a part like EOR, it is difficult to promote the research only by economical principles, and the government as core needs to promote it. As viewed from an international point, the development/commercialization of technology such as CO2 recovery, fixation and effective use are extremely important from an aspect of not only the heightening of competitiveness in the domestic industry, but Japan's international contribution in the 21st century. (NEDO)

General report of entrustment investigation for demonstration tests of turnover from oil to methanol in the thermal power plants in fiscal 1995. Total assessment of methanol using power generation technology; 1995 nendo sekiyu karyoku hatsudensho methanol tenkan nado jissho shiken itaku gyomu hokokusho sokatsu hokokusho. Methanol riyo hatsuden gijutsu sogo hyoka chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

To promote the introduction of methanol fuel into the thermal power plants, total assessment was provided. For calculating the methanol production cost, the plant was assumed to be constructed in the Southeast Asia or Middle East. Two methods, i.e., steam reforming and gaseous phase fluid methods, were investigated. Since the price of natural gas is low in the Middle East, the methanol production cost by the gaseous phase fluid method is estimated to be about 1.5 yen per thousand kcal. The transportation cost can be reduced into one-half to one-third of current cost using a large-scale tanker. Although the heating value of methanol per weight is lower than that of LNG, the volume flow of methanol is similar to that of LNG due to its low specific gravity. Conceptual designs were conducted for some power generation systems, such as gas turbine of combined cycle, diesel engine, and fuel cell. The power generation cost was estimated to be 8 to 9 yen per kWh, which depends on the receiving price of methanol. It is nearly equivalent to that of LNG combined cycle power generation. There are no problems of air pollution and ash disposal. When considering the long-term security of energy sources, the use of methanol would be one of the selections as utilization of natural gas. 6 refs., 33 figs., 25 tabs.

General report on the results of the development of fuel cell technology such as urban energy center. Evaluation study of life of phosphoric acid fuel cells (fiscal 1995 and 1996); Toshi energy center nado nenryo denchi gijutsu kaihatsu kenkyu seika sogo hokokusho. Rinsangata nenryo denchi jumyo hyoka kenkyu (1995 kara 1996 nendo)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Receiving subsidies from MITI, NEDO carried out this project in fiscal 1995 and 1996 as a joint research with Technology Research Association for Phosphoric Acid Fuel Cell Power Generation System and others. The project aimed at developing the accelerated test method which can evaluate in a short time the cell life of phosphoric acid fuel cells (PAFC) and the lowering of characteristics. The accelerated test method of PAFC life is thought to be a tool indispensable for the promotion of commercialization, but the accelerated test method like the usual material evaluation has not yet been established. To solve this problem, procedures were developed to rationally plan the accelerated test on short stacks of full scale based on the small cell test data. Here, to rationally estimate the operational state under actual conditions based on the data on the accelerated test, it is necessary to fully understand the mechanism of deterioration of PAFC. By conducting in parallel the element study for the basic elucidation of cell deterioration phenomena, obtained was the useful information/knowledge which back up the results of the accelerated test scientifically. 168 figs., 33 tabs.

FY 1999 Industrial science and technology research and development project. Report on the results of research and development of the technologies for genome informatics (Acceleration of analysis of green mold transcription control information); 1999 nendo genome infomatics gijutsu kenkyu kaihatsu seika hokokusho. Koji kabi no tensha seigyo joho no kaiseki kasokuka nado

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

A total of 49 budding yeast transcription factor disruptants and one conditional transcription over expression strain are produced, to elucidate the gene regulation networks using the gene expression profile data, and to measure the systematic and high-quality gene expression profiles using the Affymetrix's GeneChip system. The program is also developed for accurately predicting the base sequences which regulate expression of given gene groups, based on the uniqueness of the upstream sequences. The analysis with the aid of the program predicts 8 gene expression regulation sequences, which are considered to be novel, from the gene groups of retarded expression by the transcription factor disruptants. The time course gene expression data are produced from the transcription factor SW14 conditional over expression strain. The analysis of the data indicates that the analysis of the subtracted genes using the gene expression profiles from the wild type strain is useful for clarifying the effects of the derived transcription factor over expression. (NEDO)

Fiscal 1998 achievement report on regional consortium research and development project. Research and development for developing basic technologies of composite laser-aided metal machining into highly advanced system (Technology of machining process systematization for furnishing titanium and titanium alloys with advanced functions - 2nd year); 1998 nendo fukugo laser nado ni yoru kinzoku kako kiban gijutsu no kodo system ka no kenkyu kaihatsu seika hokokusho. 2. Chitan oyobi chitan gokin eno kokino fuyo kako system ka gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

For the creation of new industries and for their expansion to the consumer market, efforts are made to develop laser-aided technology of bonding titanium with other metals and CAD/CAM (computer-aided design/computer-aided manufacture)-aided technology of high-precision multidimensional laser machining for titanium. In the development of technology for bonding titanium and other metals, combinations of titanium and stainless steel and titanium and copper are examined, and a dissimilar metal joint is successfully manufactured, free of cracks at a tension shear strength level of approximately 4200N/40mm and shear stress of 200MPa or higher. In the study of the mechanism of bonding, it is found that a sound weld metal is created with the formation of intermetallic compounds well inhibited by allowing titanium to be on the upper surface. In the study of laser-aided titanium cutting, a dross-free cutting process is realized by optimizing cutting conditions such as those involving laser excitation and assist gas application. Three-dimensional laser-aided cutting is carried out in compliance with a 3-dimensional laser cutting program incorporating metal pattern data, and the process is found to reduce the number of necessary dies to 1/4 to shorten and simplify the process. (NEDO)

Report on the results of research and development under a consignment from NEDO on deca-nano quantum integrating transistor substrate technologies; 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Deca-nano ryoshi shusekika soshi kiban gijutsu no kenkyu kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Researches have been conducted on deca-nano quantum integrating transistor substrate technologies, and developments were made on a three-dimensional device simulator which can be used in deca-nano domains, and a circuit simulator to have quantifying function transistors coexist with silicon semiconductor integrated circuits. The researches were intended to develop a simulator capable of analyzing properties of very small silicon and compound semiconductor devices in deca-nano domains. The researches discussed the applicability of conventional simulators, calculated quantum levels in a three-dimensional hetero structure, and resulted in development of an electron wave propagation simulator in optional two-dimensional shapes, a quantum Monte Carlo simulator, and a three-dimensional semiconductor device simulator with quantum correction. On the other hand, in order to estimate characteristics of a hybrid circuit in which single electron transistors coexist with conventional transistors such as CMOS transistors, a single electron hybrid circuit simulator was developed. The development indicated that a CMOS-SET fused memory is promising as a future LSI memory. 22 refs., 116 figs., 3 tabs.

Report on the results of the fiscal 1997 R and D under consignment from NEDO of photon measuring/processing technology (development of high-efficiency production process technology); 1997 nendo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku photon keisoku kako gijutsu (kokoritsu seisan process gijutsu kaihatsu) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Development is made of high energy-efficiency laser processing technology and high efficiency/high grade photon generation/control technology as laser light source, for the purpose of energy conservation/efficiency heightening of production processes which require a large amount of energy such as welding, joining, surface treatment, and particle fabrication. As to keyhole dynamics of the molten metal generated on the laser weld, construction of simulational mathematical models was started. Equipment to fabricate semiconductor ultrafine particles which become the core of quantum dot functional structures was designed to fabricate particles. In-situ optical measuring technology was studied of element/size of particles of below 30 nm in size by emission spectroscopy associated with the plasma irradiation. As tightly focusing all-solid-state laser technology, studied was the wavelength conversion method in which harmonics are generated four times as much as the fundamental wave due to high efficient generation of high power UV laser. Also studied were high laser strength, low optical losses, conditions for fostering high homogenity crystals. Technology for high accuracy processing of element surface was established. High efficiency photon generation technology was comprehensively investigated. 140 refs., 276 figs., 46 tabs.

Fiscal 1997 research report on the R and D project under a consignment from NEDO. Photonics engineering (R and D of photonics measuring/processing technology); 1997 nendo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Photon keisoku kako gijutsu (photon keisoku kako gijutsu no kenkyu kaihatsu) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Survey was made on the trend of R and D on photonics engineering to clarify the direction of its impact and ripple effect on industrial fields. Reduction of environment burden, improvement of the productivity and reliability of products, and creation of new industries by novel creative R and D are necessary simultaneously. For reconsideration of the previous measurement and machining technologies in a manufacturing industry, use of photon (laser) beams is promising. As photonics engineering, photonics measurement and machining, and elemental and peripheral technologies for generation and control of photon were surveyed. Photonics application technologies for medical care and diagnosis, communication and transmission, entertainment, and chemical fields were also surveyed. In fiscal 1997 as the first year of this project, based on the results obtained in leading researches conducted until fiscal 1996, some technological issues were clarified through the survey on the latest trend of photonics engineering in measurement, machining and generation fields, and its feasibility in the other fields. 265 refs., 91 figs., 10 tabs.

Development of technology for thin substrate polycrystalline solar cells for practical use. Development of manufacturing technologies for low-cost substrates (technical development for production of high purity silicon); Usugata takessho taiyo denchi seizo gijutsu no jitsuyoka kenkyu. Tei cost kiban seizo gijutsu kaihatsu (taiyo denchiyo silicon seizo gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

Tatsuta, M [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

1994-12-01

This paper reports the study results on development of manufacturing technologies of Si for solar cells in fiscal 1994. (1) P in Si could be successfully reduced to 0.1ppmw by EB melting method. The condition possible to reduce P in Si while continuously supplying metal Si was found. The 20kg class EB melting equipment was also designed and manufactured which can be connected with solidifying rough refining process. (2) Use of a water-cooling copper mold was studied using a small melting equipment for cost reduction in solidifying rough refining process. As a result, the prospect of crucible-free technology for removal of P and solidifying rough refining was obtained. (3) B in Si could be successfully reduced to the target of 0.1ppmw by vapor addition method using a plasma melting equipment. (4) The prototype SOG-Si achieved a conversion efficiency of 14.1% as solar cell. In addition, the advanced solar cell prepared by efficiency enhancement process achieved a conversion efficiency of 15.9%. 3 figs.

Research on fabrication technology for thin film solar cells for practical use. Technological development for qualitative improvement (development of fabrication technology of thin film polycrystalline Si solar cell); Usumaku taiyo denchi seizo gijutsu no jitsuyoka kenkyu. Kohinshitsuka gijutsu (usumaku takessho silicon kei taiyo denchi seizo no gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

Tatsuta, M [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

1994-12-01

This paper reports the study results on the fabrication technology of thin film polycrystalline Si solar cells in fiscal 1994. (1) On the fabrication technology of high-quality Si thin films, the new equipment was studied which allows uniform stable melting recrystallization over a large area. The new equipment adopted a heating method based on RTP system, and is now under adjustment. (2) On the fabrication technology of light/carrier confinement structure, degradation of hydrogen-treated thin film Si solar cells by light irradiation was examined. As a result, since any characteristic degradation was not found even by long time light irradiation, the high quality of the cells was confirmed regardless of hydrogen-treatment. Fabrication of stable reproducible fine texture structure became possible by using fabrication technology of light confinement structure by texture treatment of cell surfaces. (3) On low-cost process technology, design by VEST process, estimation of cell characteristics by simulation, and characteristics of prototype cells were reported. 33 figs., 1 tab.

Research on fabrication technology for thin film solar cells for practical use. Technological development for qualitative improvement (improvement of conversion efficiency of amorphous silicon solar cells after degradation); Usumaku taiyo denchi seizo gijutsu no jitsuyoka kenkyu. Kohinshitsuka gijutsu (amorphous taiyo denchi no shoki rekkago koritsu kojo no gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

Tatsuta, M [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

1994-12-01

This paper reports the study results on technological development for qualitative improvement of a-Si solar cells after initial degradation in fiscal 1994. On the fabrication technology of light-stable a-Si films, the film formation method possible to control combined hydrogen by repetitive formation/treatment was developed. The obtained high-quality light-stable a-Si film was featured by low defect density in a wide optical band gap range, and defect density of nearly 3 {times} 10{sup 16}/cm{sup -3} after light irradiation. The light degradation rate of the cell where the a-Si film was applied to i layer was relatively stable by 10% or less. The a-Si/a-Si double-layer tandem cell fabricated by this technology produced a high conversion efficiency of 10.5%. By applying {mu}c-Si material to photoactive layer as narrow band gap material, the cell with optical sensitivity even in long wavelength ranges more than 1000nm was obtained. The a-Si/{mu}c-Si double-layer tandem cell produced an initial efficiency of 8.0% and an efficiency after degradation of 7.5%. 12 figs., 3 tabs.

Technological development for super-high efficiency solar cells. Technological development for super-high efficiency singlecrystalline silicon solar cells (super-high efficiency singlecrystalline Si solar cells); Chokokoritsu taiyo denchi no gijutsu kaihatsu. Chokokoritsu tankessho silicon taiyo denchi no gijutsu kaihatsu (chokokoritsu tankessho silicon taiyo denchi cell no gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

Tatsuta, M [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

1994-12-01

This paper reports the study results on technological development of super-high efficiency singlecrystalline silicon solar cells in fiscal 1994. (1) On development of high-performance light receiving layer, the fine electrode for receiving surfaces was designed to reduce serial resistance, and the high-quality oxide passivation film was studied to reduce surface recombination velocity. (2) On development of forming technology of back heterojunction, the high-quality cell with B-doped fine crystalline Si film on its back was studied by heat treatment of the fine crystalline Si film, and the cell structure with high back reflectance of light was also studied. (3) On analysis for high-efficiency cells, the relation between the back recombination velocity at the interface between p-type substrate and back passivation film, and the internal collection efficiency as probe light was injected from the back, was calculated by numerical simulation. As a result, the cell back recombination velocity could be evaluated by measuring the spectral internal collection efficiency to back injection. 15 figs., 6 tabs.

1998 report on results of technological development of super metal. Innovative technological development for producing advanced structure controlled metallic material (high-speed large reduction rolling technology); 1998 nendo super metal no gijutsu kaihatsu seika hokokusho. Kodo soshiki kozo seigyo kinzoku zairyo sosei gijutsu kaihatsu (kosoku daiatsuka atsuen gijutsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

A report was made on the 1998 results concerning technological development of super metal. In the 'research and development of super metal', metallurgical examination has been made on crystal grain super refining process using a machining simulator, with studies carried out on crystal grain refining by utilizing large-strain deformation with more than 50% deformation for a single pass and a diploid structure. As a result, it was found that the crystal grain size can be refined to approximately 1{mu}m. Consequently, in fiscal 1998, a high-speed large reduction rolling test equipment was developed capable of rendering a sheathing technology in a mechanically testable size by a rolling method. This test equipment has such capacity as the maximum load of 1,000 ton and the maximum torque of 95 ton/m and is a rolling mill whose scale is largest in the nation on the laboratory level. The rolling speed can be 120mpm, a very fast speed for a large sized rolling mill. Moreover, equipped with an immediate water cooling facility adjacent to the rolls and an automatic operating system for example, it is a high function rolling mill capable of cooling and rolling that render the complex and delicate sheathing technology of super metal. (NEDO)

78 FR 28167 - Special Local Regulation, Cruce a Nado Internacional de la Bahia de Ponce Puerto Rico, Bahia de...

Science.gov (United States)

2013-05-14

... individually or cumulatively have a significant effect on the human environment. This proposed rule involves..., 2013. D.W. Pearson, Captain, U.S. Coast Guard, Captain of the Port San Juan. [FR Doc. 2013-11360 Filed...

Investigational report on the trend of control technology; Seigyo gijutsu doko chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-06-01

For the purpose of corresponding to changes of the industrial structure and making full use of the control technology, the paper investigated the state of the application. High-grade automation in the manufacturing industry has reached the spread of use at big companies for these 10 years. The hierarchical structure of business/process/DCS has been completed, and the optimal control and the advanced control have been realized. The development and spread to the much wider field is anticipated. The soft structure system is needed for equipment improvement in view of the life cycle of equipment and toward the elimination of bottlenecking. For the design of the control system, commercial tools began to be much used, and it is expected in future to accumulate and recycle the knowledge/knowhow for effective design work. Further, strict simulation models based material balance and heat balance have also been on the rise, and the advance in technology is expected. Because of the total productivity of the production equipment, the control technology is anticipated not only for the pursuit of controllability but for the use as supporting technology in the operation/driving/failure diagnosis for working out, carrying out and evaluating the optimum operation plan. 18 refs., 99 figs., 100 tabs.

Effective utilization technology of carbon dioxide. CO sub 2 no yuko riyo gijutsu

Energy Technology Data Exchange (ETDEWEB)

Ibusuki, T. (National Research Inst. for pollution and Resources, Tsukuba (Japan))

1991-03-12

As carbon dioxide-related environmental measures, method was explained to chemically convert and utilize carbon dioxide. Synthesis is possible of methanol, carbon monoxide, different carbohydrates, etc. by catalytic hydrogenation of carbon dioxide, using hydrogen produced by the electrolysis of water. Task consists of heightening in both convertibility and selectivity, and abundant supply of low cost hydrogen. Methane, alcohol, etc. can be synthesized by electrochemical reducion of carbon dioxide. Because of effectively inserting multiple electron, discssion is being made of catalyst, intergrated with electrode, and electron transmitter. The photoelectrochemical reduction of carbon dioxide can be also made by utilizing photoelectric current, generated upon photoradiation on the semiconductive electrode. However, task consists of heightening in both efficiency and selectivity. Photochemical reduction of carbon dioxide, actually made by green plant, consists of oxidationlike decomposition of water and reduction of carbon dioxide. Both those reactions are skillfully separated by intermediation of very quick electron transmission system. Reduction is being studied with semiconductor, metallic colloid, enzyme, metallic complex and other various catalysts. 10 refs., 3 figs., 4 tabs.

Survey of advanced composite material technology; Senshin fukugo zairyo gijutsu ni kansuru chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

Results of functions and examples are investigated and described for more than 190 fiber reinforced composite materials. There should be a new viewpoint for even the same material when changing the point to observe it, and new industries will be expected if the viewpoint is adequate. This report has proposed a new concept of `composite functions.` The development works based on non-strength functions which will differentiate the other materials have been stressed. After describing the brief history of the advanced composite materials and significance of composite functions, the present situations and future possibilities of such functions as heat resistance, electricity-electromagnetism, chemicals-proof, adsorption, vibration-proof and resistance, tribology, erosion, sound, adaptability to living bodies and etc. have been examined based on the practical examples. As the future important subjects, adapting possibility of materials having composite functions to marine structures, and possibility of water cleaning system are described. 59 refs., 4 figs., 10 tabs.

Future trend of science and technology. Kagaku gijutsu wa doko made susumu ka

Energy Technology Data Exchange (ETDEWEB)

Kondo, S. (Inst. for Future Techynology, Tokyo (Japan))

1991-01-05

The fifth survey of a large scale technology forecast which is conducted by the Science and Technology Agency (Japan) is now started. This paper gives a prospect on the megatrend of technical innovation according to the 4th. Survey conducted in 1987. Threefold viewpoints of the analysis are as follows: Type of the technical innovation (Breakthrough type and technology melting pot type). New technology and new product development (adding higher value, human friendly type). Leading technology qualitative innovation of information/electronic technology; pursuit of highly intelligent technology. (Biological technology qualitative innovation of bio-technology: pursuit of simulated organism function). The technical forecast is conducted on 17 field sectors. Examples of design-synthesis and fabrication'' technology are a technology of control based on clarification at atomic and molecular levels'', and another is design and synthesis technology of substances by means of a computer science:.'' 2 tabs.

Laser materials processing as manufacturing technology; Seisan gijutsu to shite no laser kako

Energy Technology Data Exchange (ETDEWEB)

Miyamoto, I. [Osaka University, Osaka (Japan)

1998-11-01

This paper describes the laser material processing. Laser is artificial light that uses the amplification based on the induced emission of light. It is very excellent in directivity and monochromaticity. The high power density and concentration characteristics of laser enable a variety of high-performance processing such as junction, removal, reforming, and addition. Excellent controllability (that facilitates the automated processing), transmission performance (the processing by energy transmission in long range space is most suitable for laser), and non-contact processing (that contains no wearing, noise, and contamination) are great advantages that the existing processing method does not have. In the wide wavelength area between ultraviolet and infrared areas, the laser that can be used for material processing is very wide over the range of the continuous oscillation to the ultra short pulse of a nanosecond order. The thermal processing accompanied by melting and evaporation as well as the non-thermal processing (quantum processing) by a photochemical reaction is also available as the type of processing. The processing used for manufacturing technology is almost thermal processing including removal, junction, reforming, and addition. The thermal processing covers the range of electronics to heavy industry. 29 refs., 12 figs., 2 tabs.

Investigation on food sanitation controlling technologies; Shokuhin eisei kanri gijutsu ni kansuru chosa

Energy Technology Data Exchange (ETDEWEB)

Doi, Y [Hokkaido Electric Power Co. Inc., Sapporo (Japan); Nishioka, J

2000-03-24

Investigation has been made on the current status of food sanitation controlling technologies. Eighty percent of food poisoning is caused by bacte such as Salmonera, enteritis vibrio, staphylococcus, and pathogenic colibacillus. Putrefaction as the cause for food poisoning occurs from proliferation of different microorganisms. Heating sterilization is the main method being performed, but non-heating method may include sterilization by flash and high voltage pulse discharge in addition to ultra-high pressure and ultraviolet ray sterilization. As a result of the questionnaire survey, what is extracted as the problems in the food sanitation controlling technologies is to establish a rinsing and sterilizing method with large sterilization effect, an effective sterilizing method and thawing of processed marine products, and a cooling method in food processing. Increasingly demanded for the future is to develop a foodstuff sanitation control system using as the core the hazard analysis critical control point (HACCP, a quality control program developed by the U.S. NASA to ensure safety in manufacturing space food), and micro-organism control and sterilizing technologies to support the above system. The flash pulse and high-voltage pulse sterilizing technologies as the non-heating sterilizing technology are more effective than the conventional heating sterilization methods also from the aspect of quality retention after sterilization. More active development thereof is desired. (NEDO)

Visualization techniques in diesel engine research. Diesel Engine kenkyu ni okeru kashika gijutsu

Energy Technology Data Exchange (ETDEWEB)

Komori, M.; Tsujimura, K. (New ACE., Tsukuba (Japan))

1993-04-01

In order to grasp the phenomena actually occurring in the combustion chamber for improving the combustion and for reducing the exhaust gas emission of the diesel engines, the visualization techniques are becoming to be essential and indispensable. The authors have observed the spray and combustion, when proceeding the combustion improvement by the high pressure injection, and then have performed the image processing and simulation calculation based on them. The high pressure injection devices used for the experiment are the intensifier type and accumulator type which can generate the injection pressure more than 200MPa, and both of them are the electronic controlled hydraulic drive type, and are driven separately from the engine. Since it was found that the analysis of high pressure injection by the hologram is limited in the conditions, as for the spray, the spray analysis was performed by the transmitted light attenuation method and laser sheet method. As for the combustion, the engine for observing the combustion was trially made, and then the combustion state was observed by the high speed photograph. Furthermore, the flame temperature analysis by the image processing using the combustion photograph and the analysis of flow and turbulence of the flame were carried out. 9 refs., 16 figs.

Development of pressurized coal partial combustor; Kaatsu sekitan bubun nenshoro gijutsu no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

Watanabe, T [Center for Coal Utilization, Japan, Tokyo (Japan); Kawamura, K [Kawasaki Heavy Industries, Ltd., Kobe (Japan); Tanaka, T [Chubu Electric Power Co. Inc., Nagoya (Japan); Muramatsu, T [Electric Power Development Co. Ltd., Tokyo (Japan)

1996-09-01

The coal partial combustor (CPC) uses a combustion technology with which coal is burned at elevated temperatures and under revolution, the constituents are captured on the furnace wall and removed as molten slag from the furnace. This is a combustion technology to reduce load of ash on subsequent devices. To generate a molten condition, it is necessary to raise the combustion temperature as high as possible (to about 1600 degC in the furnace), but this is effective for a gas turbine composite power generation system. An efficiency of higher than 45% may be expected at the power transmission terminal. As an operation on subsidy from the Agency of Natural Resources and Energy, the normal-pressure CPC technology has already been established, and a research on pressurized CPC is being progressed since fiscal 1991. The research is in progress with a schedule that elemental tests for 7 tons per day production are conducted until fiscal 1995, a 25 tons per day pilot plant will be completed by November 1997, and verification tests for long-term continuous operation will be implemented until 1998. The 7 tons per day elemental tests have identified gasification performance and slag extraction performance using five types of coal having different properties. 7 refs., 10 figs., 4 tabs.

Denchuken review. Prospecting and visualization technology; Denchuken review. Chika no tansa kashika gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-05-30

This paper introduces the prospecting and visualization technology cultivated in Denchuken (Central Research Institute of Electric Power Industry). The fluctuations in underground gas, underground water, gravity, terrestrial magnetism, and terrestrial current are information from the earth. The change in underground structure, underground water movement, and underground properties can be grasped using this information. With the progress of electronic engineering, a geophysical exploration method has been rapidly developed in recent years. This method is the most advanced technology in many ground examination methods. In the Denchuken, the following methods have been put to practical use between the shallow section of several meters under ground and the deep section of several kilometers. An underground radar method, seismic prospecting method, electrical prospecting method, CSAMT method that estimates the position of geothermal sources or faults by electromagnetic waves, TDEM method, and AE method that destroys the rock at the depth of the ground and detects by slight sound. Moreover, a geotomography method that can visualize the ground depth in precision using a bore hole by nondestruction executes the tomography based on specific resistance, elastic waves, electromagnetic waves, and percolation. 127 refs., 94 figs., 4 tabs.

New technique of railway bridges in Hokuriku Shinkansen; Hokuriku Shinkansen tetsudokyo no gijutsu

Energy Technology Data Exchange (ETDEWEB)

Miyabayashi, H. [Japan Railway Construction Public Corp., Tokyo (Japan)

1996-09-01

This paper presents new technologies of the railway bridges in Hokuriku Shinkansen. Hokuriku Shinkansen of 117km between Takasaki and Nagano is a part of Shinkansen connecting Tokyo with Nagano by nearly 1.5 hours. Its construction is in promotion under severe financial condition, and cost reduction is an essential target. Among the concrete bridges in this section, Kirizumigawa bridge, a prestressed concrete strutted 3-span continuous beam bridge, adopted a lowering erection method for its slant pier. In this method featured by high safety and profitability, the rib component of a concrete arch bridge is vertically erected on a arch support, and installed by swinging it toward the central span. In addition, a cantilever method was adopted to keep the scenery of a national park. Daini Chikumagawa bridge with the longest span of 133.9m among concrete railway bridges is the first cable-stayed prestressed concrete bridge in Shinkansen. Yashiro Minami and Kita bridges of 105m and 90m in central span are the extradosed bridges which were adopted as optimum structure for lowering the beam height of meddle-sized railway bridges. 3 refs., 12 figs., 2 tabs.

Technical research and development of long-spanned bridges; Chodai kyoryo no gijutsu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

Sakai, F.; Yamanaka, M.; Ogawa, K.; Mizukami, Y.; Kano, J.; Watanabe, K. [Kawasaki Heavy Industries, Ltd., Kobe (Japan)

1996-10-15

Outlined herein is technical development of long-spanned bridges represented by suspension and cable-stayed bridges. The design of long-spanned bridges requires theoretical analysis of flexibility in which balance after they are deformed by load is taken into consideration. The matrix finite displacement analysis program is developed for optimizing cable-stayed bridge designs and determining suspension bridge shapes as the new major functions. The analysis program, named KASTAN, is also developed for stress analysis of the structure details. A wind tunnel for structure designs is installed to analyze resistance to wind. A number of experiments have been carried out by the tunnel for the designs of segment, main tower and overall bridge models. The means of controlling wind-caused vibration include hydraulic dampers, mass dampers, and combination of high damping rubber and spacer. Cable-stayed bridges are highly flexible, their types being selected by tower height and shape, span ratio and shape of the main beam, and cable position. These bridges constructed by the company include the S-shaped ones whose main beams are supported by cables suspended by two towers of different height, and the others with H-shape towers of high columns which are connected to each other by horizontal beams. 11 refs., 15 figs.

Fiscal 1998 New Sunshine Program achievement report. Development for practical application of photovoltaic system - Development of thin-film solar cell manufacturing technology (Development of next-generation thin-film solar cell module manufacturing technology - Development of CIS solar cell module manufacturing technology - Development of high-quality film enlargement technology); 1998 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Usumaku taiyo denchi no seizo gijutsu kaihatsu / jisedai usumaku taiyo denchi module no seizo gijutsu kaihatsu / CIS taiyo denchi module no seizo gijutsu kaihatsu / kohinshitsumaku no daimensekika gijutsu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

The project aims to establish a manufacturing process that enables both high-quality CuInSe{sub 2} (CIS) film solar cell enlargement and cost reduction and to develop a device structure which uses less heavy metal for the purposes of increasing the CIS thin-film solar cell size and efficiency and decreasing environmental impact. Several element technologies have been established for increasing the area of high-efficiency Cu(In, Ga)Se{sub 2} (CIGS) solar cells. Concerning the enlargement of the photoabsorption layer which is to assume the most important role, it is found that a high-quality CIGS film, which is near homogeneous though within a 10cm times 10cm area, is fabricated by an in-line vapor deposition method. As for dead area reduction and high-speed patterning, it is found that laser scribing works effectively in the patterning of the window layer and photoabsorption layer. As for reduction in the use of heavy metal, a high efficiency of 16.2% is attained in a cell not using a CdS film as expected in the case of a cell using a CdS film, this thanks to a CIGS film surface reforming technique. The technique of junction formation for CIGS solar cells is improved, and then a true efficiency of 18.5% is achieved. (NEDO)

Fiscal 1993 international joint projects under New Sunshine Program. Surveys of bilateral cooperation and solar energy technology; 1993 nendo kokusai kyoryoku jigyo nikokukan kyoryoku taiyo energy gijutsu ni kakawaru gijutsu chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-03-01

Concerning bilateral projects, overseas surveys were conducted about Japan-Australian and Japan-US technical cooperation. Concerning technological development, information was collected at the Solar World Congress of the International Solar Energy Society (ISES), and information was collected and opinions were exchanged at the 15th International Conference on Amorphous Semiconductors. A survey was conducted of Russia's development of solar cells and of their performance evaluation, and an overseas survey was conducted of the development of spaceborne photovoltaic power generation system practicalization technology. Surveys were conducted of international joint projects for the development of photovoltaic power generation system practicalization technology in Europe and the US. Overseas surveys were conducted of international joint projects concerning the development of photovoltaic power generation system practicalization technology, and a survey was conducted of the research and development of photovoltaic power generation in the US and of the state of introduction and diffusion of the same. A survey was also conducted of the state of element technology development for solar energy utilization in Europe. (NEDO)

Fiscal 1999 research report. Research on photonic measurement and processing technology (Development of high- efficiency production process technology); 1999 nendo foton keisoku kako gijutsu seika hokokusho. Kokoritsu seisan process gijutsu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This report summarizes the fiscal 1999 research result on R and D of laser processing technology, in-situ measurement technology, and generation and control technology of photon as laser beam source, for energy saving and efficiency improvement of energy-consumptive production processes such as welding, jointing, surface treatment and fine particle fabrication. The research was carried out by a technical center, 9 companies and a university as contract research. The research themes are as follows: (1) Processing technology: simulation technology for laser welding phenomena, synthesis technology for quantum dot functional structures, and fabrication technology for functional composite materials, (2) In-situ measurement technology: fine particle element and size measurement technology, (3) All- solid state laser technology: efficient rod type LD-pumping laser module, pumping chamber of slab type laser, improvement of E/O efficiency of laser diode, high-quality nonlinear crystal growth technology, fabrication technology for nonlinear crystals, and high-efficiency harmonic generation technology. Comprehensive survey was also made on high- efficiency photon generation technologies. (NEDO)

Fiscal 1993 international joint projects under New Sunshine Program. Surveys of bilateral cooperation and solar energy technology; 1993 nendo kokusai kyoryoku jigyo nikokukan kyoryoku taiyo energy gijutsu ni kakawaru gijutsu chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-03-01

Concerning bilateral projects, overseas surveys were conducted about Japan-Australian and Japan-US technical cooperation. Concerning technological development, information was collected at the Solar World Congress of the International Solar Energy Society (ISES), and information was collected and opinions were exchanged at the 15th International Conference on Amorphous Semiconductors. A survey was conducted of Russia's development of solar cells and of their performance evaluation, and an overseas survey was conducted of the development of spaceborne photovoltaic power generation system practicalization technology. Surveys were conducted of international joint projects for the development of photovoltaic power generation system practicalization technology in Europe and the US. Overseas surveys were conducted of international joint projects concerning the development of photovoltaic power generation system practicalization technology, and a survey was conducted of the research and development of photovoltaic power generation in the US and of the state of introduction and diffusion of the same. A survey was also conducted of the state of element technology development for solar energy utilization in Europe. (NEDO)

Fiscal 1998 New Sunshine Program achievement report. Development for practical application of photovoltaic system - Development of thin-film solar cell manufacturing technology (Development of material/substrate manufacturing technology - Development of high-quality amorphous material/substrate manufacturing technology); 1998 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Usumaku taiyo denchi no seizo gijutsu kaihatsu / zairyo kiban seizo gijutsu kaihatsu (kohinshitsu amorphous kei zairyo kiban no seizo gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

A microcrystalline Si thin film is used to form the i-layer of a narrow gap a-Si based thin film solar cell. Since a microcrystalline p-layer is to act as the seeding crystal layer for the microcrystalline i-layer, it has to be very high in crystallinity and therefore is produced under high hydrogen dilution conditions. In this process, a problem arises of the darkening of the underlying transparent SnO{sub 2} electrode. Since this is due to chemical reaction on the SnO{sub 2} surface layer, blackening is prevented by shortening the film fabrication time, and then an excellently microcrystalline p-layer is obtained. Furthermore, by inserting a microcrystalline i-film buffer layer of low fabrication rate into the p/i boundary, plasma damage on the microcrystalline p-layer is inhibited for the fabrication of a microcrystalline i-layer high in crystallinity at high film fabrication rates. A high Voc is then obtained even when the microcrystalline p-layer is very thin. If the hydrogen dilution rate is too low when the i-layer film fabrication rate is high, the initially fabricated layer turns out to be thick to the detriment of film performance. On the other hand, the p-layer or the buffer layer will be etched when the hydrogen dilution rate is too high. The problem is solved by continuously varying the hydrogen dilution rate from high to low during i-layer fabrication. (NEDO)

Fiscal 1997 R and D project on industrial science and technology under a consignment from NEDO. R and D of the application technology of functional protein complex (R and D of the high-functional maintenance technology for power plants); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo gijutsu Sogo Kaihatsu Kiko itaku. Kinosei tanpakushitsu shugotai oyo gijutsu no kenkyu kaihatsu (hatsuden shisetsuyo kokino maintenance gijutsu kaihatsu) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

In order to develop advanced maintenance technology for power generation facilities, application technology of functional protein complexes is under investigation. On a light controllable enzymatic reaction system, construction of a light controllable bio-reactor by physico-chemical and bio- chemical techniques, and structure and functions of a photosynthetic protein complex using thermophilic cyanobacteria as material are under investigation. On a molecular mechanism for recognition and reaction of receptor proteins, structure analysis and engineering application of glutamate receptor channels of a synaptic transmission system, and basic study and material proteins for artificial structures using endocytic micromachinery, and a multi-enzyme system for synthesis of glycosphingolipids are under investigation. On a complex oxidation/reduction system by genetic engineering technique, construction of a high- efficiency stable system with functionally arranged oxidoreductase and electron transmission systems in biomembranes is in promotion. Research work was also made on molecular assemblies for a functional protein system. 166 refs., 91 figs., 9 tabs.

Report on achievements in fiscal 1999. Research and development of immediately effective and innovative energy environment technology (Development of immediately effective and high-efficiency solar cell technology, development of high-quality ingot manufacturing technology, and development of high-efficiency cell making technology); 1999 nendo sokkoteki kakushinteki energy kankyo gijutsu kenkyu kaihatsu seika hokokusho. Sokkogata kokoritsu taiyo denchi gijutsu kaihatsu (kohinshitsu ingot seizo gijutsu kaihatsu / kohinshitsu cell ka gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Research and development has been made on improving quality of ingots for substrates, manufacturing high-quality thin type substrates, and making high-efficiency cells. This paper summarizes the achievements in fiscal 1999. In developing the high-quality ingot manufacturing technology, discussions were given on a method for assessing impurities and crystal defects by using the total reflection scattering type infrared tomography, and on the optimal solidifying and cooling conditions during the ingot manufacturing by using simulation calculation for solidification. As a result of analyses and discussions, such findings were found effective that the ingot should be solidified through making the solid-liquid interface shape flat, and the temperature falling rate in an ingot should be maintained constant. In developing the high-efficiency cell making technology, discussions were given on the optimal construction based on a simulation that assumes the light sealing structure using the RIE method, and on the optimal construction of polycrystalline silicon solar cells by using a device simulator (PCID). The important factors in achieving a conversion efficiency of 20% are the light sealing structure, surface passivation, and substrate thickness. (NEDO)

FY 1999 research and development of technologies for commercialization of photovoltaic power generation systems. Development of technologies for fabrication of thin-film solar cells/materials and substrates (Development of technologies for fabrication of high-quality amorphous materials and substrates); 1999 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Usumaku taiyo denchi no seizo gijutsu kaihatsu / zairyo kiban seizo gijutsu kaihatsu (kohinshitsu amorphous kei zairyo kiban no seizo gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The research and development project is implemented for the amorphous/microcrystalline solar cells with the thin microcrystalline silicon film as the i layer, and the FY 1999 results are reported. The fabrication technologies are investigated for the microcrystalline silicon solar cells of pin or nip structure by RF or VHF plasma CVD using SiH{sub 4} and H{sub 2} as the stock gases. The tests are conducted for evaluating characteristics of the thin microcrystalline silicon film, to investigate the effects of film-making pressure, power and hydrogen dilution rate on the characteristics at a constant film-making temperature of 180 degrees C. The researches on the fabrication technologies for the microcrystalline solar cell of pin structure confirm that use of VHF plasma CVD improves crystallinity, electrical and optical characteristics of the p-type thin microcrystalline silicon film. The researches on the fabrication technologies for the microcrystalline solar cell of nip structure covers transparent substrates, film-making speed of the p layer, power and substrates, and a conversion efficiency of 7.5% is realized by the solar cell formed on a texture substrate. (NEDO)

Fiscal 1997 report on the results of the technical development of super metal under consignment from NEDO. Technology to create ferrous mesoscopic structure control materials; Super metal no gijutsu kaihatsu (tetsukei mesoscopic soshiki seigyo zairyo sosei gijutsu) seika hokokusho (1997 nendo). Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko (NEDO) itaku kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The fiscal 1997 results were reported of the project on the technical development of super metal which draws out limit performance of ferrous metal and improves the recyclability. In the study of large-strain deformation, a study was carried out with the use of large-strain deformation of more than 50% per 1 pass (strain rate: 0.7 or more) and multi-phase structure. By the crystal microstructuring technology, a level was reached where approximately 1{mu}m crystal size can be obtained. In the study of high magnetic field utilization, the course of study of the structure control and microstructuring was chosen in the preliminary experiment using the existing 8 tesla magnet, and the design and fabrication of a new 12 tesla large-diameter magnet were conducted. In the study of material structure prediction, modeling of microstructuring by recrystallization and establishment of a material predicting method of micro/multi-phase/mixed-grain structures were made the subjects. In the analysis of the mesoscopic structure, the mesoscopic analysis was made of the 0.3C-9Ni steel microstructured by the large-strain deformation thermal processing, and it was shown that the reflective electronic image measured by varying accelerating voltage gives new structural information. 111 refs., 135 figs., 35 tabs.

Report on results for fiscal 1997 on development of coal liquefaction technology . Development of liquefaction base technology (studies on development and internationalization of environmentally benign coal liquefaction technology); 1997 nendo sekitan ekika gijutsu seika hokokusho. Ekika kiban gijutsu no kaihatsu (kankyo chowagata sekitan ekika gijutsu no kaihatsu oyobi kokusaika kenkyu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The research objective is the development of environmentally benign coal liquefaction technology and the studies on internationalization of coal liquefaction technology. Implemented for the former are (1) research on improvement and rationalization of liquefaction process and (2) research on advancement of liquefaction base technology. In (1), studies were made on in-oil preprocessing technology and scale suppressing measures for the purpose of obtaining reform/high grade of coal, and on improvement of liquefied oil collecting ratio, sophistication of coal slurry and attainment of light oil/high grade from liquefied crude oil for the purpose of optimizing liquefaction reactive conditions and improving a solvent. In (2), in developing high activity/high dispersion type new catalysts, catalytic sufurization behavior and activity manifestation mechanism were explored, as were iron hydroxide based iron ore properties and liquefaction reactive characteristics. The initial reactive characteristics of liquefaction for example were investigated for the purpose of collecting basic data for expanding kinds of coal. In order to attain the latter objective of the research, a feasibility study of liquefaction location was conducted, as were the investigation including sampling of iron ore for catalytic material and the investigation of coal gasification technology. After the completion of the Australian brown coal liquefaction project, the development of the coal liquefaction technology commenced in fiscal 1994 produced a number of useful records and ended in 1997. (NEDO)

Fiscal 2000 report on cooperative basic project on international energy consumption improvement/International conference project such as IPCC. International Symposium on the Kyoto Mechanisms; 2000 nendo kokusai energy shohi koritsuka nado kyoryoku kiso jigyo / IPCC nado kokusai kaigi jigyo Kyoto mechanism ni kansuru symposium hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-06-01

The above-named symposium was held at United Nations University in the period April 12-13, 2001, and the conference is outlined in this report. The symposium aimed to contribute to the progress of international rule making and to the enhancement of mutual understanding through the exchange of views and opinions by negotiators representing their countries over the Kyoto mechanisms, the rule of emissions trading in particular, and through the analysis of negotiators' options; to discuss how international rules should be from a practical viewpoint with the participation of people related to the market or industries and engaged actively in the implementation of the mechanisms; to enrich Japanese people's knowledge about the mechanisms and to enhance their understanding of greenhouse gas emissions reduction techniques making use of the mechanism of the market; and so forth. The conference included Session 1: Current status of international negotiations and views from parties, Session 2: Toward credible and workable scheme of the mechanisms (Parts 1 and 2), and Session 3: Emissions trading - Outstanding issues and options. (NEDO)

Fiscal 2000 report on cooperative basic project on international energy consumption improvement/International conference project such as IPCC. International Symposium on the Kyoto Mechanisms; 2000 nendo kokusai energy shohi koritsuka nado kyoryoku kiso jigyo / IPCC nado kokusai kaigi jigyo Kyoto mechanism ni kansuru symposium hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-06-01

The above-named symposium was held at United Nations University in the period April 12-13, 2001, and the conference is outlined in this report. The symposium aimed to contribute to the progress of international rule making and to the enhancement of mutual understanding through the exchange of views and opinions by negotiators representing their countries over the Kyoto mechanisms, the rule of emissions trading in particular, and through the analysis of negotiators' options; to discuss how international rules should be from a practical viewpoint with the participation of people related to the market or industries and engaged actively in the implementation of the mechanisms; to enrich Japanese people's knowledge about the mechanisms and to enhance their understanding of greenhouse gas emissions reduction techniques making use of the mechanism of the market; and so forth. The conference included Session 1: Current status of international negotiations and views from parties, Session 2: Toward credible and workable scheme of the mechanisms (Parts 1 and 2), and Session 3: Emissions trading - Outstanding issues and options. (NEDO)

FY 1998 report on the results of the research and development of fundamental technologies for superconductor applications; 1998 nendo chodendo oyo kiban gijutsu kenkyukaihatsu seika hokokusho. Chodendo oyo kiban gijutsu keknyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-05-01

As to the research on the superconductor manifestation mechanism, Y123 monocrystal which was partially replaced with Zn and Ni was manufactured, and it was made clear that the addition of these impurities greatly change anisotropy of superconductors. It was made clear that instability of lattice and magnetism is included in high temperature superconductor. Also made clear was an important role in the Nb/Ba replacement in existence of magnetic flux melting phase transfer and the magnetic field induced pinning effect. The manufacture of Y123 bicrystal membrane was successful by the liquid phase epitaxy method. The manufacture of non-copper base K-Bi-O new superconductor was successful by the ultra-high pressure synthesis method. The stabilized process was established for large size crystals of 15-20mm square in Y base and of 20-25mm square in Nd base. Also successful was the growth by LPE method of crystal with thick membrane of 20mm x 20mm x 10{mu}m on the MgO monocrystal substrate. The non-bicrystalization of Y base Nd base monocrystal was successful, and the peak phenomenon control in Jc-H was found out. By neutron irradiation, the acquisition magnetic field of 3.7T at 77K was achieved using bulk Y base 123 material with diameter of 3cm. And, the critical current density of 60,000 A/cm{sup 2} was achieved at 77K and 3T. (NEDO)

FY 1998 annual summary report on photon measuring/processing techniques. Development of the techniques for high-efficiency production processes; 1998 nendo foton keisoku kako gijutsu seika hokokusho. Kokoritsu seisan process gijutsu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

The objectives are set to develop the techniques for energy-efficient laser-aided processing; techniques for high-precision, real-time measurement to improve quality control for production processes and increase their efficiency; and the techniques for generating/controlling photon of high efficiency and quality as the laser beam sources therefor, in order to promote energy saving at and improve efficiency of production processes consuming large quantities of energy, e.g., welding, joining, surface treatment and production of fine particles. The R and D themes are microscopic processing technology: simulation technology for laser welding phenomena; microscopic processing technology: synthesis of technology for quantum dot functional structures; in-situ status measuring technology: fine particle elements and size measurement technology; high-power all-solid-state laser technology: efficient rod type LD-pumping laser modules and pumping chamber of a slab-type laser; tightly-focusing all-solid-state laser technology: improvement of E/O efficiency of laser diode, high-quality nonlinear crystal growth technology and fabrication technology for nonlinear crystal; and comprehensive investigation of photonics engineering: high-efficiency harmonic generation technology. (NEDO)

Achievement report for fiscal 1981 on Sunshine Program. Practical application technologies for photovoltaic power systems (Development of peripheral technologies); 1981 nendo taiyoko hatsuden system jitsuyoka gijutsu seika hokokusho. Shuhen gijutsu no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1982-03-01

As for their outputs, the 3kW separately-excited and self-excited photovoltaic power plants yield daily averages of 7.8kWh and 6.9kWh, respectively, and this means that the self-excited type is inferior to the separately-excited type in terms of conversion efficiency. Automatic measuring devices for photovoltaic characteristics are installed at Sapporo, Sendai, Nagoya, and Miyazaki, which will elucidate regional difference in photovoltaic characteristics. A simulation of photovoltaic characteristics is performed and the resultant value is compared with the yield of an experimental 3kW system, and the result of the comparison is found reasonable. Cell arrays are subjected to investigation for configurations lowest in output loss for the respective shadow patterns. Harmonic characteristics are analyzed under plural-interconnection circumstances. Studies are made to miniaturize and simplify system constituents, and it is found that a 3-hour storage is proper for a 3kW-class storage battery. It is also found that a self-excited type suffers less voltage fluctuation in interconnected operation on a small short-circuit capacity system. Possibilities are that independent operation is started when output is larger than load, which is to be detected by checking changes in phase, frequency, etc. Array configuration, arresters, and shielding wires are taken up for the study of measures to cope with direct thunder strokes. (NEDO)

Report on achievements in fiscal 1999. Research and development of micro-machine technologies (development of micro-factory technologies); 1999 nendo micro machine gijutsu no kenkyu kaihatsu seika hokokusho. Micro factory gijutsu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

With an objective to achieve energy saving by micronizing the manufacturing processes of small industrial products, this research and development is intended to establish technologies to realize a micro-machine system, in which devices for processing, assembly, transportation and inspection used in the manufacturing processes are unified and incorporated in narrow spaces. Fiscal 1999 has performed, on the items of (1) research and development of the systematizing technologies and (2) comprehensive surveys and researches, with respect to the development of the first prototype system, and fabrication on the trial basis of devices to be mounted on the second prototype system, and discussions on further functional enhancement of the different devices. As a result in the research of the systematizing technology, the first prototype system was developed, that unifies the base unit fabricated in fiscal 1998, the electrolysis processing device, the fluid feeding device, the micro-arms, the coating device, the transportation device, and the environment recognizing device. The basic performances of the individual devices on the first prototype system were verified. Based on the result of this function verification, optimal design and fabrication on the trial basis of the devices mounted in the second prototype system were performed, and discussions were given on the further function enhancement in each functional device. (NEDO)

FY 1998 annual summary report on photon measuring/processing techniques. Development of highly functional maintenance techniques for power generating facilities; 1998 nendo foton keisoku kako gijutsu. Hatsuden shisetsuyo kokino maintenance gijutsu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

The objectives are set to develop the techniques for non-destructive measurement of conditions of facility portions, especially those exposed to severe environments, e.g., elevated temperature and pressure, over a wide range; the techniques for measurement of leakage of, e.g., gases, at high sensitivity; the techniques of laser-aided welding and surface-modification treatment for the members exposed to severe conditions; and the techniques for generating photon beams of high quality and energy density as the tools therefor, in order to improve reliability and maintenance efficiency of power generating facilities. The R and D themes are microscopic processing technology: fabrication technology for functional micro-composite circuits; in-situ status measuring technology: gas concentration/component measurement technology, and photon wavefront compensation device technology; non-destructive composition measuring technology: high-sensitivity detection technology using short-wavelength photons; high-power all-solid-state laser technology: rod-type laser and slab-type laser; tightly-focusing all-solid-state laser technology: high-energy pulse, high-quality laser; and comprehensive investigation of photonics engineering: investigation for photon-applied measurement technologies. (NEDO)

Technique to increase performance of C-program for control systems. Compiler technique for low-cost CPU; Seigyoyo C gengo program no kosokuka gijutsu. Tei cost CPU no tame no gengo compiler gijutsu

Energy Technology Data Exchange (ETDEWEB)

Yamada, Y [Mazda Motor Corp., Hiroshima (Japan)

1997-10-01

The software of automotive control systems has become increasingly large and complex. High level languages (primarily C) and the compilers become more important to reduce coding time. Most compilers represent real number in the floating point format specified by IEEE standard 754. Most microprocessors in the automotive industry have no hardware for the operation using the IEEE standard due to the cost requirements, resulting in the slow execution speed and large code size. Alternative formats to increase execution speed and reduce code size are proposed. Experimental results for the alternative formats show the improvement in execution speed and code size. 4 refs., 3 figs., 2 tabs.

Fiscal 1997 report of the development of high efficiency waste power generation technology. No.1 volume. Element technology development; Kokoritsu haikibutsu hatsuden gijutsu kaihatsu (yoso gijutsu kaihatsu). 1997 nendo hokokusho (daiichi bunsatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Following the previous fiscal year, the technology development was conducted of a high efficiency waste power generation system using general waste as fuel. In the development of high temperature high efficiency combustion furnace, a combustion test on the external circulating fluidized bed incinerator was made to obtain data on formation/decomposition of dioxins. Moreover, a combustion test was conducted using mock refuse, petroleum-derived waste and waste plastics, to confirm stabilized combustion characteristics and low pollution. In the development of a corrosion resistant superheater, made were the stress load high temperature corrosion test, study of intergranular corrosion by elements of impurities, etc. In the development of the environmental load reduction technology, conducted was the conceptional design of pulse plasma exhaust gas disposal equipment corresponding to the actual one. In the verification test in a pilot plant, the pilot plant passed the pre-use inspection and was completed in February 1998. In the study of an optimal total system, discussed were the data on the pilot plant verification test, measuring points, how to arrange them, etc. 2 refs., 88 figs., 50 tabs.

International Clean Energy System Using Hydrogen Conversion (WE-NET). subtask 4. Development of hydrogen production technology; Suiso riyo kokusai clean energy system gijutsu (WE-NET). subtask 4. Suiso seizo gijutsu no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

This paper describes development of hydrogen production technology as a part of the WE-NET project. For the solid polymer water electrolysis method higher in efficiency and lower in cost than the previous methods, 5 companies have developed element technologies for improving electrolysis cells and synthesis technologies of hot solid polymer electrolyte based on each proper catalyst electrode production method. In fiscal 1996, the initial study on large-scale systems by middle laboratory cells was made as well as improvement of electrolysis performance by small laboratory cells and endurance tests. Among the previous methods such as a hot press method (bonding of an ion exchange membrane to an electrode), an electroless plating method (preparation of porous surface onto a membrane electrode assembly), a zero gap method (preparation of high-efficiency high-current density cells), and a sintered porous electrode method (carrying of the mixture of catalytic powder and ion exchange resin-dissipated solution onto sintered metallic porous electrode surface), the former two methods were adopted for development of bench-scale cells as effective promising methods. 192 refs., 183 figs., 108 tabs.

Report on a survey in fiscal 1999. Survey on trends in developing innovative technologies related to reducing CO2 emission in departments consuming great quantity of energy, such as petrochemical industry; 1999 nendo sekiyu kagaku kogyo nado energy tashohi bumon ni okeru CO{sub 2} sakugen ni kansuru kakushinteki gijutsu kaihatsu doko chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

A survey was performed on the state of developing energy saving and CO2 emission reducing technologies in the following fields: (1) distillation technologies, (2) combustion technologies, (3) heat transfer and conduction technologies, and (4) technologies to convert and fix generated CO2. While the technologies in the field (1) are of the matured domain, technologies providing 20 to 60% energy saving effect have been developed. In the field (2), gas turbine combustion can achieve an overall plant thermal efficiency of 50% or more, whereas a trial calculation indicates that CO2 emission can be reduced by 22%. Catalytic combustion is noticed as a measure to make low NOx emission possible. A composite type catalytic combustor for gas turbines demonstrated that NOx emission of less than 5 ppm can be achieved. In the field (3), energy saving effect higher by 52% than in the warm wind room heating system has been obtained. Development has been made on heat storing materials that have phase change temperature of higher than 80 degrees C and large latent heat storage quantity. In the field (4), researches are advanced in a TiO{sub 2} catalyst that uses sunlight. A catalyst that is methanated at high speed with CO2 conversion rate at nearly 100% has been developed. In methanol synthesis, a catalyst that has high selectivity even at low temperatures has been developed. (NEDO)

Fiscal 1998 New Sunshine Program achievement report. Development for practical application of photovoltaic system - Development of thin-film solar cell manufacturing technology (Development of low-cost large-area module manufacturing technology - Development of next-generation thin-film solar cell manufacturing technology - Development of CIS solar cell module manufacturing technology); 1998 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Usumaku taiyo denchi no seizo gijutsu kaihatsu / tei cost daimenseki module seizo gijutsu kaihatsu / jisedai usumaku taiyo denchi no seizo gijutsu kaihatsu / CIS taiyo denchi module no seizo gijutsu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

This research aims to achieve a conversion efficiency of 13% and a manufacturing cost of 140 yen/Wp with a 30cm times 30cm Cu(InGa)Se{sub 2}-based thin-film solar cell submodule. Ga and sulfur are combined and a film fabrication technology was developed which would improve on Voc. Concerning Ga, a laminated precursor layer was fabricated and evaluated, which comprised a Cu-25wt%Ga alloy layer and a Ga source which was a Cu-48%Ga alloy layer. Concerning sulfur, the vapor phase selenization temperature and the selenization retention time in an H{sub 2}Se gas atmosphere was allowed to vary for a change in Cu(InGa)Se{sub 2} calcopyrite crystallinity for the study of relations between the amount of sulfur taken in and the solar cell characteristics, and the relations were assessed by EPMA (electron probe microanalyzer). Technologies were developed for the fabrication of high-resistivity buffer layers by solution growth, for the fabrication of window layers (transparent, conductive ZnO film) by sputtering, and for their patterning. Submodules of a ZnO/Zn(O,S,OH)x/Mo structure were fabricated, 10cm times 30cm and 30cm times 30cm in size. The former achieved 12.5% in conversion efficiency, and the latter 11.6%. (NEDO)

Development in fiscal 1999 of technologies to put photovoltaic power generation systems into practical use. Development of thin film solar cell manufacturing technologies (Development of low-cost large-area module manufacturing technologies, next generation thin film solar cell module manufacturing technologies, development of thin film poly-crystalline solar cell module manufacturing technologies); 1999 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Usumaku taiyo denchi no seizo gijutsu kaihatsu (tei cost daimenseki module seizo gijutsu kaihatsu (jisedai usumaku taiyo denchi no seizo gijutsu kaihatsu (usumaku takessho taiyo denchi module no seizo gijutsu kaihatsu)))

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Research and development has been performed on a high throughput forming technology and a modularization technology for thin film poly-crystalline solar cell modules. This paper summarizes the achievements in fiscal 1999. In developing the high throughput forming technology for a high-quality thin film, research has been made on a low-cost VEST process to re-utilize substrates by separating the thin film from the substrate. In the melting re-crystallization process, it was discovered that plasticity deformation of the substrate can be reduced greatly by raising the substrate heating temperatures. It was also found out that substrate warping amount can be reduced to about one-fifth of the conventional amount by making the thickness greater than 1.5 mm and raising the heating temperatures higher than 1300 degree C. In developing the thin film modularization technology, it was indicated that the property improving effect remains the same even if the hydrogen passivation method is changed from the hydrogen ion injection to the hydrogen plasma processing. In the trial fabrication of the thin film modules, a conversion efficiency of 13.1% was achieved in nine-cell structured modules. (NEDO)

Fiscal 1998 New Sunshine Program achievement report. Development for practical application of photovoltaic system - Development of thin-film solar cell manufacturing technology (Development of low-cost large-area module manufacturing technology - Development of next-generation thin-film solar cell manufacturing technology - Development of thin-film polycrystalline solar cell module manufacturing technology); 1998 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Usumaku taiyo denchi no seizo gijutsu kaihatsu / tei cost daimenseki module seizo gijutsu kaihatsu / jisedai usumaku taiyo denchi no seizo gijutsu kaihatsu (usumaku takessho taiyo denchi module no seizo gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

The aim is to realize the practical application of the above-named solar module expected to exhibit higher efficiency and reliability and achieve cost reduction through consumption of less materials. In fiscal 1998, 1) technologies were developed to reduce substrate warpage during recrystallization for the higher-throughput fabrication of high-quality thin films and 2) technologies were also developed for the realization of higher-throughput fabrication of thin films and for efficiency improvement for thin-film modules. Under item 1), experiments were conducted by simulation for reducing warpage to occur in thin-film polycrystalline Si substrates during fabrication by melting and recrystallization. Under item 2), for the development of thin-film cell high-throughput technologies, studies were started on a more practical hydrogen plasma process to challenge the conventional process of crystal defect inactivation by hydrogen ion injection with which achievement of high throughputs is difficult. For the development of technologies for the enhancement of thin-film module efficiency, efforts were exerted to realize a 10cm times 10cm square shape for the enhancement of efficiency in the process of filling modules with cells. These efforts achieved a great step toward future practical application. (NEDO)

Development in fiscal 1999 of technologies to put photovoltaic power generation systems into practical use. Development of thin film solar cell manufacturing technologies (Development of low-cost large-area module manufacturing technologies, next generation thin film solar cell module manufacturing technologies, development of CIS solar cell module manufacturing technologies); 1999 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Usumaku taiyo denchi no seizo gijutsu kaihatsu (tei cost daimenseki module seizo gijutsu kaihatsu (jisedai usumaku taiyo denchi no seizo gijutsu kaihtsu (CIS taiyo denchi module no seizo gijutsu kaihatsu))

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Research and development has been performed on a technology to manufacture CIS-based thin film solar cells. This paper summarizes the achievements in fiscal 1999. In the research of a large-area light absorbing layer manufacturing technology, investigation was made on light absorbing layers in manufacturing sub-modules with a size of 30 cm times 30 cm. With regard to the temperature condition in the light absorbing layer forming process, it was found that the cooling rate affects particularly the adhesion in the connecting interface of the light absorbing layer and the Mo rear electrode layer. In addition, it was revealed that the sulfur take-in amount can be increases by extending the retention time at the sulfurizing temperature and by decreasing the temperature to turn the gas phase into selenium. In the research of elementary technologies to establish the mass production process, developments were performed on the high-resistance buffer layer manufacturing technology, the high-quality window layer film manufacturing technology, and the technology to manufacture rear electrode layer made of high-quality metals. In developing the patterning technology, two kinds of the existing patterning devices were modified and adjusted for patterning the substrates with a size of 30 cm times 30 cm. In addition, a processing device was installed in the conventional manually operated process for module finishing. (NEDO)

Development of practical application technology for photovoltaic power generation systems in fiscal 1997. Development of technologies to manufacture thin film solar cells, development of technologies to manufacture low-cost large-area modules, development of technologies to manufacture next-generation thin film solar cells (development of technologies to manufacture CIS solar cell modules); 1997 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu. Usumaku taiyo denchi no seizo gijutsu kaihatsu, tei cost daimenseki module seizo gijutsu kaihatsu, jisedai usumaku taiyo denchi no seizo gijutsu kaihatsu (CIS taiyo denchi module no seizo gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Research and development was made with an objective to achieve conversion efficiency of 13% in a 30 cm times 30 cm size submodule of a CIS-based thin film solar cell, and to develop a manufacturing technology that can achieve 140 yen/Wp. This paper describes the achievements attained during fiscal 1997. In fiscal 1997, based on the achievements reached during the previous year, a submodule with a size of 10 cm times 30 cm was fabricated for an attempt of improving the open voltage and short circuit current density. Simultaneously, the applicability thereof to a module with an area as large as 30 cm times 30 cm was evaluated. As a result of experimental discussions, enhancement in the open voltage was verified by increasing amount of Ga or sulfur, but it was not possible to achieve 600 mV or higher. In the research of component technologies to establish a mass production process, research and development was made on a high-resistance buffer layer film forming technology, a high-quality window layer film forming technology, a high-quality metallic rear electrode film forming technology, and patterning technologies. The outdoor exposure test was continued on laminated mini-modules with a size of 10 cm times 10 cm. (NEDO)

New Sunshine Program for fiscal 2000. Development of photovoltaic system commercialization technology - Development of thin-film solar cell manufacturing technology - Development of low-cost large-area module manufacturing technology (Development of next-generation thin-film solar cell manufacturing technology - Development of CIS solar cell module manufacturing technology); 2000 nendo New sunshine keikaku seika hokokusho. Taiyoko hatsuden system jitsuyoka gijutsu kaihatsu, Hakumaku taiyodenchi no seizo gijutsu kaihatsu, Tei cost dai menseki mojuru seizo gijutsu kaihatsu, Jisedai hakumaku taiyodenchi mojuru no seizo gijutsu kaihatsu (CIS taiyodenchi mojuru no seizo gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Research and development was carried out for the production of a Cu(InGa)Se{sub 2}-based thin-film solar cell submodules, having a conversion efficiency of 13% and an area of 30 cm times 30 cm, at a cost of 140 yen/Wp (at a production rate of 100 MW/year). In the effort to fabricate a large-area photoabsorption layer, reproducibility was improved by the introduction of a technique for controlling the Cu/III group ratio in and the thickness of the metal precursor film by the use of ICP (inductively coupled plasma) analysis. A maximum conversion efficiency of 12.93% and a reproducibility of 85% were achieved, which meant that the production cost goal was achieved. In the effort to develop a high-resistance buffer layer fabrication technology, a fabrication method was developed in which a lower limit was specified for solution transparency enabling the completion of the film fabrication process with no colloid formation occurring in the solution. For preventing the high-resistance buffer layer fabrication process from growing too complicated, the steps were integrated into one for the MOCVD-ZnO:B window layer. As the result, the film fabrication process subject to the film fabrication control based on solution transparency was simplified for a great increase in reproducibility. (NEDO)

Report on evaluation/selection surveys on coal species, processes and others. Appendix; Tanshu process nado hyoka sentei chosa hokokusho. Furoku

Energy Technology Data Exchange (ETDEWEB)

NONE

1981-03-01

This report, consisting of 7 chapters, summarizes literature related to liquefaction of coal. Chapter 1 describes the results of the (Project Lignite), i.e., development of the concept of two-stage liquefaction of lignite. Chapter 2 describes the COSTEAM process, which uses synthesis gas (CO-H{sub 2}) as the reducing agent and coal moisture as the hydrogen source for liquefaction of coal of low degree of carbonization, e.g., brown coal. Chapter 3 describes solubilization of coal with alcohol, where coal is reacted with ethanol and NaOH at 300 to 420 degrees C. Chapter 4 describes liquefaction of coal and production of lighter products with tetrahydroquinoline as the hydrogen donor. Chapter 5 describes low-temperature carbonization as the process for liquefying coal, in particular brown coal. Chapter 6 describes possibility of development of new liquefaction techniques for brown coal, including solvolysis for liquefaction, role, recovery and reuse of catalysts, short contact time processes, and coal pretreatment. Chapter 7 describes economic viability of the secondary hydrogenation. (NEDO)

Production of ethanol, fat and oil and methane gas from several crops. Sushu sakumotsu nado no energygen toshite no hyoka

Energy Technology Data Exchange (ETDEWEB)

Uehara, Tsuyoshi; Suganuma, Hirotoshi

1988-05-01

Aiming at production of ethanol, fat and oil and so on, ten kinds of miscellaneous cereal crops such as pearl-millet, soybean and so on were grown, and comparative investigation of the production rate which was considered utilization of whole plants were carried out. The suitability of vegetable wastes as methane fermentation materials for the methane gas production was investigated by the constituent analyses and methane fermentation experiments. Nine kinds of the grasses and vegetable wastes such as tomatoe buds, broccoli leaves were used for the investigation. As the results, the estimated yield of ethanol per 10 are from pearl-millet was 690 liter, the estimated yield of fat and oil per 10 are was 70 liter from soybean, The results of the analyses of nine kinds of the farm residues were as follows: (1) carbon content of about 40 %, (2) C/N ratio of 13 av., (3) C/P ratio of 91 av., and (4) the content of C,N and P was roughly appropriate. 680 to 760 milliliter of methane gas was produced from one gram of the dry matter of tomatoe bods, and in case of broccoli leaves, 424 milliliter of methane gas was produced, it was found that these values were not inferior to animal dung. (4 figs, 15 tabs, 6 refs)

Survey on development of brown coal liquefaction techniques; Kattan ekika gijutsu ni kansuru chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1980-09-01

Described herein are results of literature survey on brown coal liquefaction reactions and elementary techniques. Liquefaction of brown coal in the presence of CO and steam, or CO, H{sub 2} and steam has been investigated. It is not clear by the literature survey whether it is superior to the normal process which uses hydrogen. Brown coal contains moisture at high contents, and the drying techniques are necessary to be developed for its liquefaction. The future coal liquefaction plant will be much larger than the past one, and there are a number of problems to be solved, such as those involved in the designs of large-sized high-pressure slurry pumps, heat exchangers and preheaters. It is also necessary to develop the materials of and production techniques for large reactors which are serviceable under severe conditions. The solid-liquid separation for liquefaction products involves a number of the elementary techniques characteristic of coal liquefaction processes, and needs many technological developments. The one-stage brown coal liquefaction process is compared with the two-stage process for the secondary hydrogenation of SCR, but no clear conclusions are reached. (NEDO)

Development of position measuring technology by GPS; GPS ni yoru sokui gijutsu no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

Ishizaki, T [Ministry of Transportation, Tokyo (Japan)

1994-07-25

With regard to the GPS (global positioning system) which uses the satellites launched and administered by the U.S.A. and has been utilized worldwide for ships, automobiles and geodetic surveys in recent years, Ministry of Transport started investigation and research on the application of its position measuring system from FY 1989. In this fiscal year, a study on position measuring methods and selection of the position measuring system to be developed were made, in FY 1991, the real-time functioning and track display were developed, in FY 1992, the initialization aboard the ship, the measure to prevent cycle slip, and the radio data communication technology were developed, and in FY 1993, a long term demonstration experiment presuming its practical use was conducted attaining the expected purpose. In this article, the developed real-time kinematic position measuring system is introduced. Regarding the position measuring methods by the GPS, there are the one point position measuring method and the relative position measuring method. Regarding this newly developed position measuring device, its application to work ships and structures can be considered in various ways. 4 figs.

Disinfection technology with ozone for cryptosporidium; Cryptosporidium taisaku to shite no ozone shodoku gijutsu

Energy Technology Data Exchange (ETDEWEB)

Tanaka, Y.; Takahashi, K. [Fuji Electric Co. Ltd., Tokyo (Japan); Motoyama, N. [Fuji Electric Corporate Research and Development, Ltd., Kanagawa (Japan)

1998-06-10

Measures against Cryptosporidium parvum (C. parvum) in the waterworks are discussed. C. parvum is a pathogenic protozoan, and exists in the form of oocyst protected by a hard shell. It does not multiply in water or food, but does in human intestines and causes violent diarrhea and bellyache. A grave concern was created when many people were infected with the protozoan via tap water in Japan and the United States. Under such circumstances, ozone is used in an experiment to inactivate C. parvum. It is found that the C. parvum oocyst inactivation effect is evaluated by using a Ct value (disinfectant concentration Cmg/Ltimescontact time in minute) and that ozone treatment inactivates 90-99% of the protozoan. When various advanced water treatment technologies are being introduced for the purpose of serving safe and tasty water, the outcome of this study conveniently offers an ozone treatment method that will additionally inactivate pathogenic protozoa. Studies will be continued to elucidate the effects of factors of ozone treatment and water quality for the completion of an ideal disinfection process. Reference is made to an example of disinfection work implemented at a water purification plant of Milwaukie City, United States. 9 refs., 6 figs., 4 tabs.

Survey of the development of industrial technology in Japan; Sangyo gijutsu rekishi keisho chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

Conditions for creating Japan`s type technologies have been investigated by extracting technologies and experiences meriting the succession to the next generation among the industrial technologies in Japan after World War II. Technological creativity of Japan began to appear from the 1970`s. Quartz watch of SEIKO, U-Matic VTR of SONY, ladle refinery method of DAIDO Steel, PAN-based carbon fiber of TORAY, continuous annealing of Nippon Steel, calculating machine using liquid crystal of SHARP, ASA-400 high sensitivity film of FUJI FILM, and Japanese word-processor of TOSHIBA are the examples. The basic ability to create those products and technology lays in the diversity of firms in electronic device and fine machinery industries consisting the boundary between general and electrical machinery, the systematizing ability and inter-industrial cooperation which were promoted through quality control, automatization of assembly and production control by computer, and the research and development capability which has been brought up during the high economic growth as a learning process of technology. The society and industries have to make efforts to create the new creative conditions for younger generations. Otherwise, Japan`s technology will not develop. 134 refs., 19 figs., 8 tabs.

Noise and vibration improvement technologies for engines; Engine ni okeru soon shindo kaizen gijutsu

Energy Technology Data Exchange (ETDEWEB)

Kuzuoka, H.; Maeda, R. [Nissan Motor Co. Ltd., Tokyo (Japan)

1999-02-01

This is an outline of recent measurement and simulation technology for reduction of engine noise and vibration. We can recognize correct phenomenon by visualization of noise and vibration phenomena using new measurement technology. And we can create optimum countermeasures using new simulation technology In this report, examples of application of these technology in the development of NEO-DI engines are provided. (author)

Process improvement technology for petrochemical plant; Sekiyu kagaku puranto ni okesu purosesu kaizen gijutsu

Energy Technology Data Exchange (ETDEWEB)

Yamada, Shin

1999-05-05

Before, GTC technology Co. was a manufacturer of the tray as a Greenwich technology. It is the subsidiary, which undertakes technology and licence of the engineering firm in U.S.A. at present. It carries out besides the technology licence support in the startup for the prolonged driving of technical service, operating condition of the plant of improvement and optimization and, etc. Has made separation and purification technology, which made extractive distillation to be a beginning good and has the process improvement technology to the PTA (high-pure terephthalic acid) from BTX (benzene toluene xylene) of petrochemical plant. (NEDO)

Domestic and overseas situations of Japanese automobile industries; Jidosha gijutsu. Jidosha wo torimaku shojosei

Energy Technology Data Exchange (ETDEWEB)

Kawahara, H. [Nissan Motor Co. Ltd., Tokyo (Japan)

1998-08-01

The economic circumstances in 1997 are characterized by a high rule in the United States, slow developmental trend in Europe and lagging situations in Asia. The political and economic situations of main counties in the world are summarized with indication of Japanese dull activities, financial crisis and their countermeasures as well as the trade friction in 1998. The number of cars sold in Japan decreased to 3.71 millions in 1997 from 4.55 millions of 1996, while cars imported amounted to 360,000 in 1997 (-14.7% compared to that of the preceding year), the number of exported cars were 4.55 millions as compared to 3.71 millions in the preceding year, namely about 23% increase, of which 1.41 millions for North America and 1.25 millions for Europe. Other evolutional facts are also presented zone by zone. Then, questions which the Japanese automobile industries are faced to are enumerated and explained. The overseas production bases and their activity trends are mentioned, focusing on the modular production system as well as the lean production system as for the international expansion of the products, whereas market strategies with direct injection engine, low emission, hybrid car and so on are described in terms of technical development. Lastly, and innovation of physical distribution tat takes place in the United States such as a movement to a larger scale dealer system, car dealing business through internet and so forth are mentioned including the Japanese trials in line with these matters forecasting an ever-intensive concurrent. 5 refs., 5 tabs.

Fiscal 1994 report. Liquefaction key technology subcommittee; 1994 nendo ekika kiban gijutsu bukai hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-03-01

The subcommittee held the 1st meeting in August 1994 and the 2nd in March 1995, when preceding fiscal year's research results, fiscal 1994 research plans, fiscal 1994 research results, etc., were introduced, and deliberated. In the study of hydrorefining of naphtha, kerosene, and light oil fractions, a nitrogen concentration level of not more than 5 ppm was achieved by refining oils from Indonesian coal. Studies were also made about the two-step hydrorefining system, the relationship between the coal oil refining level and sludge formation, etc. In the research for the development of novel catalysts for upgrading coal oil, the active life of a nickel-supporting catalyst for hydrogenation at the 1st step was somewhat prolonged with an increase in the amount of nickel. In the study of coal liquefaction conditions, an AWIP method was deliberated, wherein liquefaction process waste water was utilized as one of catalytic component adjusting materials. For upgrading liquefaction key technologies, studies were made for catalyst improvement and pretreatment method development, and about the behavior of liquefaction reaction in a high boiling solvent-aided process. (NEDO)

Fiscal 1995 report. Liquefaction key technology subcommittee; 1995 nendo ekika kiban gijutsu bukai hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

The subcommittee held the 1st meeting in September 1955 and the 2nd in March 1996, when fiscal 1995 research plans and research results were introduced and deliberated. In the study for designing a high-dispersion catalyst and the elucidation of the mechanism of activity expression, catalysts of highly dispersed iron supported on the brown coal surface in various ways were compared with each other in terms of liquefaction activity. Furthermore, geometric changes in the iron catalyst during the sulfurizing process were examined using the XRD (X-ray diffraction) and TEM (transient electromagnetic) methods. An improved catalyst was found to achieve a liquefaction yield near the Yallourn coal liquefaction limit in a high boiling solvent system. Concerning the study of coal oil product applications and refining technologies, reports were delivered on research results relating to the problem of blocking to occur during naphtha fraction refining and measures therefor, inhibition of active metal geometric changes during reaction, methods for separating hetero-compounds from coal oil and application thereof, and so forth. (NEDO)

Development of application technology of ultrasonic wave sensor; Choonpa sensor oyo gijutsu no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

Hosoya, H; Hikita, N; Sasaki, H; Kore, H [Mazda Motor Corp., Hiroshima (Japan)

1997-10-01

We have developed parking assist system, which informs a driver the closing point and distance to the objects such as other vehicle, wall and pole around the own vehicle at parking area and makes parking maneuverability easy. This system is based on the range detection technology using ultrasonic wave sensor. We have improved the detecting ability in short range of about 20cm by reducing the reverberation of transmitting wave signal and controlling sensitivities of signal intensity and threshold line. We will show mainly the improvement of short range detection of ultrasonic wave sensor, and briefly the performance of parking assist system. 1 ref., 14 figs., 1 tab.

Investigations on an environmental technology transfer information network; Kankyo gijutsu iten joho network chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

With developing countries (APEC countries) as the main objects, investigations were carried out to issue environmental technology transfer information that Japan has accumulated, and advance exchanges of technical information with persons related inside and outside Japan. As a result of the investigations, it was found that the environmental technology information that serves more effectively for the developing countries is the technical information that has been developed by repeating improvements, has provided actual results in work sites, and is actually used, rather than the state-of-art technologies. Based on this result, business entities having factories and operation centers located in Mie Prefecture and the city of Yokkaichi were asked to provide data for the actually used environmental technologies. Out of 51 items provided by 17 companies, nine items were selected to be used as prototype database materials for an information network. The objects of information sources will be expanded to a nationwide scale in the future to improve the contents of the database. Problems of handling information copyrights and technical know-hows were presented in the course of data collection, urging the necessity of due considerations on the matter. Necessity was indicated on maintenance and management of data base as well as its quantitative expansion. 1 ref., 4 figs.

Simulation technique on combustion of solid propellant; Kotai suishin`yaku nensho no simyureshon gijutsu

Energy Technology Data Exchange (ETDEWEB)

Iida, Akihide.; Bazaki, Hakobu.; Douke, Kiyotaka. [Asahi Chemical Industry Corp., Tokyo (Japan). Oita Plant

1999-04-30

The burning area of propellant grain is one of the most important parameter in conducting of design on solid rocket performance. However, it has been difficult to calculate the burning area of propellant grain with precise and speed by geometrical way since most of propellant configuration have been adopted as complicated. In the present study, the simulation system was developed and produced, which was adapted `particle chasing method` to and made ot compute the burning area transition. Moreover, the reliability on computation by the system was check up on. It was found that the discrepancy of calculation between by the geometrical way and by the system was less than 1%. (author)

Leading research on cell proliferation regulation technology; Saibo zoshoku seigyo gijutsu no sendo kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

For developing intelligent material, animal test alternative model, bio-cell analysis equipment, self-controlling bio-reactor and medical material, development of functional cells was studied by cell proliferation regulation technology. In fiscal 1996, the expression analysis and separation technology of specific gene for cell proliferation, and the intracellular regulation technology were surveyed from the viewpoint of intracellular regulation. The cell proliferation regulation technology by specific regulating material of cells, extracellular matrix, coculture system and embryonic cell was surveyed from the viewpoint of extracellular regulation. In addition, based on these survey results, new cell culture/analysis technology, new bio-material, artificial organ system, energy saving bio-reactor, environment purification microorganism, and animal test alternative model were surveyed as applications to industrial basic technologies from a long-term viewpoint. The approach to cell proliferation regulation requires preparation of a concrete proliferation regulation technology system of cells, and concrete application targets. 268 refs., 43 figs., 4 tabs.

Contamination-remedying technology based on biotechnology. ; Bioremediation. Biotechnology wo mochiita osen shufuku gijutsu. ; Bioremediation

Energy Technology Data Exchange (ETDEWEB)

Nishimura, M [The Japan Research Institute, Ltd., Osaka (Japan)

1993-08-01

Bioremediation technology is outlined. The bioremediation technology is a contamination-remedying technology for the injurious chemical matter discharged in the environment to be made innocuous by utilizing the decomposing ability of microorganisms. That technology is characterized by its energywise economical performance, secondary waste which is not producible and remedy which is possible on site against the contamination. As a treatment system, that technology comprises solid phase bioremediation (The contaminated soil is purified in a soil treatment unit.), slurry phase bioremediation (The contaminated soil is made slurry and decomposed by microorganisms.) and in-situ bioremediation (The treatment is made by injecting nutrients and microorganisms underground.). As for how to use the microorganisms, there are two methods: One in which living groups of microorganisms are activated and the other in which microorganisms are artificially cultivated. As contaminants in the US, listed are organic solvent, wood preservative, high-molecular aromatic halide, agricultural chemical, military waste, heavy metal waste and radioactive waste. 11 refs., 5 figs., 1 tab.

Instrumentation technology to be used for sense alternative. Kankaku daiko wo mezasu keisoku gijutsu

Energy Technology Data Exchange (ETDEWEB)

Tamiya, E. (Japan Advanced Institute of Science Technology, Hokuriku, Ishikawa (Japan))

1994-07-05

Recently, artificial taste sensors or smell sensors that simulate the biological recognition mechanism were developed. This paper describes a smell sensor using natural and artificial fats as the molecule recognizing material and the crystal oscillator or SAW (Surface Acoustic Wave) device as the transducer. The paper also describes the results of the experiments made on the sensor. This sensor consists of 20 LB (Languivir-Blodgett) layers of several types of natural fats on the SAW device. Natural fats on the surface of the crystal oscillator were coated and the response to smelling substances was checked. The result indicates that the response is almost proportional to concentration, and that alcoholic smells can be recognized. To check receiving signal from the sensor system related to absorption and the absorption speed and converting it into higher order information, experiments were conducted to convert data into characters through the neutral network. Though there are still issues of practical use, it was verified that these techniques are effective. 9 refs., 6 figs., 1 tab.

Fiscal 2000 report of investigation. Survey on technological trend concerning in si-tu remediation technology of contaminated soil; 2000 nendo osen dojo no gen'ichi joka gijutsu ni kakawaru gijutsu doko chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

In connection with contamination of soil and ground water, a survey was made on domestic patent information and existing literature or the like, in view of remediation technologies capable of in si-tu or on-site treatment, with arrangement and classification carried out by the method of cleaning contaminants. Arranged and classified were 209 pieces in the patent information, and 145 pieces in the literature from Geo-Environmental Protection Center, an incorporated body. In the methods of extracting contaminants from under the ground, the majority was the methods of pumping up ground water and those of excavating and removing. In the methods of cleaning contaminants, those of 'separation by heat', 'separation/decomposition method using water' and 'suction of gases' are found roughly in equal numbers. In the trend of the patent information, remediation technologies have started in 1990's, while bio-remediation as well as technologies of separation/decomposition through water is still increasing in the number of applications. Meantime, solidification technologies reached a peak around 1998 and have been decreasing in recent years. In the technologies of late, combinations of plural cleaning methods are also seen for the purpose of dealing with contamination with high to low concentration and compound contamination including organo-chloric compounds, heavy metals, etc. (NEDO)

FY 2001 report on the results of the follow-up study of development of the highly effective waste power generation; 2001 nendo kokoritsu haikibutsu hatsuden gijutsu kaihatsu no follow up gijutsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-03-01

For the purpose of safe operation of the highly effective waste power generation pilot plant, confirmation of the performance of corrosion resistant super heater materials under the high temperature corrosion environment, collection of the data on environmental load characteristics in waste incineration, etc., the follow-up study was made. The results were as follows: The pilot plant was able to generate high temperature/high pressure vapor stably for approximately 13,500 hours in FY 2000 and FY 2001 and for approximately 27,800 hours in 4 years since the start of the demonstrative test. The planned performance of plant facilities was fully satisfied, and the performance of environmental load reduction was fully satisfied in standard values of soot/dust, SOx, NOx, hydrogen chloride and dioxins in exhaust gas. Concerning the super heater use developmental material, its durability of 5 years or more was confirmed. It was forecast that by using this, the heightening of temperature/pressure of boiler to 500 degrees C and 100 atmospheric pressure was achieved. Further, the useful information/knowledge on plant design were obtained such as the corrosion prevention technology for waste plant and the forecast of corrosion life of materials. (NEDO)

Fiscal 1998 New Sunshine Program achievement report. Development for practical application of photovoltaic system - Research and development of photovoltaic system evaluation technology (Research and development of system evaluation technology); 1998 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Taiyoko hatsuden system hyoka gijutsu no kenkyu kaihatsu (system hyoka gijutsu no kenkyu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

In relation with several types of standard photovoltaic power generation systems expected to be put to practical use, design parameters are quantified, databases are utilized, and simulation technologies are developed, while collecting data from test facilities constructed to simulate them, for the development of evaluation techniques indispensable for the efficient improvement of photovoltaic power generation systems. In fiscal 1998, data were collected from verification test facilities and residential photovoltaic systems sited across Japan. The collected data were subjected to analysis and simulation, by which correction factors were calculated for smudge, spectral response, incident radiation, and temperature. Furthermore, load matching factors and storage battery contribution rates were calculated by simulation for the stand-alone photovoltaic systems sited in five Japanese cities, each comprising an array, storage battery, charge/discharge controller, DC-DC converter, and a load. Reference is also made to a survey of trends of technology development. (NEDO)

Report on the FY 1998 results of the New Sunshine Project (B version). Development of coal liquefaction technology (Development of base technology of liquefaction (Project on internationalization of coal liquefaction technology)); 1998 nendo sekitan ekika gijutsu kaihatsu seika hokokusho (B ban). Ekika kiban gijutsu no kaihatsu (sekitan ekika gijutsu no kokusaika jigyo)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

In 1994, a memorandum on the research cooperation was agreed between NEDO and BPPT (The Agency for the Assessment and Application Technology) in Indonesia, based on the request for the coal liquefaction technology cooperation from BPPT. It includes the following items: conference for professionals to be held, invitation and training of Indonesian engineers, activity for joint field survey and potential survey of location of coal liquefaction commercial plant. Further in 1997, the secondary memorandum was concluded for the potential survey for securing the hydrogen required for coal liquefaction by coal gasification. The survey was summarized as the potential survey for location of coal liquefaction. In the testing study for improving economical efficiency of liquefaction process, it was made clear that the higher the Fe content of Banko coal is, the higher the reaction of liquefaction is, and that Fe compounds in coal show catalysis. In the Soroako area in Sulawesi island, there are the nickel mine run by PT. Inco. Soroako limonite is promising as catalyst material for commercial-scale coal liquefaction. In the gasification method, the plant construction cost increases, but the production amount of coal-derived liquid can be increased. That is more profitable than the production of hydrogen from natural gas. (NEDO)

`Technology for Advanced Treatment of High Melting Point Metal-Based Material,` local research and development of important technology for fiscal 1997. Development of materials creation technology for high efficiency power generator components; 1997 nendo juyo chiiki gijutsu kenkyu kaihatsu. `Koyuten kinzokukei buzai no kodo kako gijutsu` (kokoritsu hatsuden`yo buzai sosei gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Efforts are made for the creation of high melting point metal-base materials to replace the currently-used Ni-base superalloys for the turbine to withstand higher operating temperatures. The main efforts made in fiscal 1997 are outlined. As in fiscal 1996, Nb-base solution alloys, in which solution reinforcement elements such as Mo and W are alloyed, are manufactured by button arc melting and tested for mechanical properties and texture/characteristics. In the designing and evaluation for a strongest Nb-base composite material, Nb-base composite materials are manufactured by use of particle dispersion-strengthening attained by addition of intermetallic compounds or elements to contribute to the formation of oxides, carbides, or nitrides. Nb-base composite materials may also be manufactured by use of eutectic-strengthening attained by utilizing crystallization in the process of coagulation. The resultant Nb-base composite materials are evaluated for their dynamic characteristics at high temperatures. In the development and evaluation of technologies for creating Nb-base materials for high-temperature components, larger specimens as heavy as several kg are tested in line with small specimens for basic studies, and the results are utilized for alloy designing for high-temperature materials. 50 refs., 97 figs., 15 tabs.

Research on fabrication technology for thin film solar cells for practical use. Research on low-cost fabrication technology for large-area modules (production technology for amorphous silicon solar cell modules); Usumaku taiyo denchi seizo gijutsu no jitsuyoka kenkyu. Daimenseki module no tei cost seizo gijutsu (amorphous taiyo denchi module seizo no gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

Tatsuta, M [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

1994-12-01

This paper reports the study results on the fabrication technology of amorphous Si solar cell modules in fiscal 1994. (1) On process technology for prototype film substrate solar cells, an advanced preprocessing equipment for film substrates, stepping roll type film forming technology, and prototype submodules were studied. A conversion efficiency of 7.2% was achieved by use of the submodule formed in an effective region of 40 {times} 40cm{sup 2}. (2) On efficiency improvement technology for film substrate solar cells, p/i and n/i interfaces, forming condition for Ag film electrodes, film thickness of transparent electrode ITO, and optimum transmissivity were studied. (3) On technology for advanced solar cells, high-quality a-SiGe: H film, ion control in plasma CVD, and a-Si film formation by plasma CVD using SiH2Cl2 were studied as production technology of narrow gap materials. (4) On advanced two-layer tandem solar cells, the defect density in optical degradation of a-Si cells by reverse bias dark current was evaluated, and outdoor exposure data were analyzed. 4 figs., 1 tab.

Research on fabrication technology for thin film solar cells for practical use. Research on low-cost fabrication technology for large-area modules (CdS/CdTe solar cell modules); Usumaku taiyo denchi seizo gijutsu no jitsuyoka kenkyu. Daimenseki module no tei cost seizo gijutsu (CdTe taiyo denchi module seizo no gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

Tatsuta, M [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

1994-12-01

This paper reports the study results on the fabrication technology of CdS/CdTe solar cell modules in fiscal 1994. (1) On the fabrication technology for high-efficiency large-area solar cells, high-quality CdTe active layer was studied. S content taken in the active layer at sintering of CdTe decreased with an increase in formed CdTe, resulting in improvement of Voc of cells. (2) On the window layer with wide band gap, the solar cell superior in collection efficiency and photoelectric characteristics could be obtained using the newly developed mixed crystal film of Cd(1-x)Zn(x)S. (3) On the forming technology of large-area coating/sintering films, improvement of CdS film quality was studied by pressurized processing of printed CdS films. As a result, improvement of film density and light transmissivity was confirmed. (4) On the leveling process technology of CdTe films, smooth surface films were obtained by experiment using an equipment simultaneously exciting samples in all directions as one of uniform coating methods of films. 7 figs.

Fiscal 1993 achievement report on New Sunshine Program. Development of photovoltaic power generation system practicalization technology (Development of ultrahigh-efficiency solar cell technology - Development of crystalline compound solar cell technology); 1993 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Chokokoritsu taiyo denchi no gijutsu kaihatsu (kessho kagobutsu taiyo denchi no gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-03-01

Efforts are made to enhance InGaP cell efficiency (target 16%) on a GaAs substrate by prolonging the InGaP minor carrier life span. In preparation of InGaP cell fabrication on silicon, a study is made of epitaxial growth of a wide band gap layer. By improving on the conditions of InGaP heteroepitaxial growth under the MOCVD (metal-organic chemical vapor deposition) method on a GaAs substrate, the InGaP cell base layer minority carrier life span is increased to be longer than 5ns. The use of epitaxial crystals greatly improves on the efficiency of InGaP cells on a GaAs substrate. Furthermore, cell structure improvement and the like are accomplished, which results in the achievement of an efficiency rate of 17.4%. As a basic technology for the fabrication of InGaP/Si tandem cells, experiments are conducted of growing a wide gap layer for the growth of Ln{sub 1-x}Ga{sub x}P on an silicon substrate. For the evaluation of epitaxial crystals and interfaces, time resolution photoluminescence measurement is performed and the result is compared with the result of simulation. (NEDO)

Fiscal 2000 achievement report on the important regional technology research and development. Research and development of eco-tailored tribo-material creation process technology (Higher order composite structure material creation process); 2000 nendo juyo chiiki gijutsu kenkyu kaihatsu seika hokokusho. Eco tailored tribo material sosei process gijutsu (koji fukugo kozo material sosei process gijutsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Efforts are made to develop novel tribo-material creation processes through the application of an inclined constitution/structure control, a nonstoichiometric constitution control, or the like, to the manufacture of materials having excellent tribological characteristics for the purpose of improving on the performance of tribology related parts. In fiscal 2000, activities are conducted in the four fields of (1) the experimental manufacture of tribo-materials by powder sintering and the review of the process, (2) the experimental manufacture of tribo-materials by melting and the review of the process, (3) the experimental manufacture of brake disk materials and the review of the process, and (4) the experimental manufacture of bearing materials and the review of the process. In field (1), the preparation of an Fe{sub 3}Al/FeAl intermetallic compound powder by mechanical alloying and gas atomization and the conditions of pressure sintering by HIP (hot isostatic press) or the like are established. Concerning the melting method, basic techniques are established and an experimentally built rotor is evaluated for braking characteristics. In field (3), efforts are made to develop Cu/Sb free brake linings that will match TiAl-made rotors and then an MgO/C system is discovered, which is found to be on the same level as the conventional materials. (NEDO)

FY1995 dynamically up-gradable machine based on right quality control and its life cycle support; 1995 nendo tekisei hinshitsu seigyo ni motozuku doteki seicho kikai to sono lifecycle shien

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

A method for determining part re-use and recycling strategy in product design is considered for optimal design of total product life cycle based on the concept of Right Quality Products. For this purpose, it is important to be able to estimate part deterioration status under various product usage conditions. For supporting product designers' decision making about the product life cycle in preliminary design phase, the deterioration estimation is not required to be very exact, but to generate every possible deterioration modes qualitatively. Then, based on these deterioration modes, functional behaviour of target products is simulated, and possible product failure modes can be generated. By utilizing the FMEA (Failure Mode and Effect Analysis) method, the effects of failure modes are evaluated, and the results are fed back to product designers for confirming their design in terms of total product life cycle optimization. A basic methodology is considered, and case study has been done for a mechanical assembly of a one-time use camera. The assembly consists of injection molded parts. Various CAE methods have been used for predicting possible part failures due to initial residual stress, warp, fatigue, creep, and wear. Then kinematic and dynamic analysis of mechanical assembly has been done for detecting the effect of part deterioration on mechanism movements. Several critical failure modes have been detected, and the effects of those failures have been checked by the FMEA method. (NEDO)

FY1995 dynamically up-gradable machine based on right quality control and its life cycle support; 1995 nendo tekisei hinshitsu seigyo ni motozuku doteki seicho kikai to sono lifecycle shien

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

A method for determining part re-use and recycling strategy in product design is considered for optimal design of total product life cycle based on the concept of Right Quality Products. For this purpose, it is important to be able to estimate part deterioration status under various product usage conditions. For supporting product designers' decision making about the product life cycle in preliminary design phase, the deterioration estimation is not required to be very exact, but to generate every possible deterioration modes qualitatively. Then, based on these deterioration modes, functional behaviour of target products is simulated, and possible product failure modes can be generated. By utilizing the FMEA (Failure Mode and Effect Analysis) method, the effects of failure modes are evaluated, and the results are fed back to product designers for confirming their design in terms of total product life cycle optimization. A basic methodology is considered, and case study has been done for a mechanical assembly of a one-time use camera. The assembly consists of injection molded parts. Various CAE methods have been used for predicting possible part failures due to initial residual stress, warp, fatigue, creep, and wear. Then kinematic and dynamic analysis of mechanical assembly has been done for detecting the effect of part deterioration on mechanism movements. Several critical failure modes have been detected, and the effects of those failures have been checked by the FMEA method. (NEDO)

Evaluación del riesgo ambiental de carbofurano en bioensayos con organismos no blanco

Directory of Open Access Journals (Sweden)

José Alberto Iannacone

2011-06-01

Full Text Available El carbofurano es uno de los plaguicidas más empleado en la agricultura peruana. El objetivo de este trabajo fue evaluar el riesgo ambiental del carbofurano en bioensayos de toxicidad, sobre once especies no destinatarias. La siguiente secuencia relativa de mayor a menor cocientes de riesgo (CR del carbofurano para los 19 puntos finales de efecto en once especies fue encontrada: Daphnia magna (mortalidad > Lemna minor (inhibición de formación de las hojas > Paracheirodon innesi (nado extraño = P. innesi (incremento del movimiento opercular > Chironomus calligraphus (mortalidad > L. minor (necrosis > P. innesi (mortalidad > L. minor (clorosis > Tetrapygus niger (inhibición de la fecundación > Coturnix japonica (mortalidad > Oncorhynchus mykiss (incremento de coloración > Ceraeochrysa cincta (no eclosión de huevos > O. mykiss (mortalidad con oxígeno > O. mykiss (mortalidad sin oxígeno > Trichogramma pretiosum (mortalidad > C. cincta (mortalidad > T. pretiosum (no emergencia de adultos > Trichogramma pintoi (mortalidad > Beauveria bassiana (inhibición del crecimiento. Los cocientes de riesgo (CR indicaron en todos los casos un alto riesgo del carbofurano principalmente en el ambiente acuático en comparación con el terrestre.Carbofuran is one of the most employed pesticides in Peruvian agriculture. This research aimed to evaluate the risk assessment in bioassays of carbofuran on eleven non-target species. The following relative sequence in decreasing ecotoxicity order in terms of RQ (Risk quotient to carbofuran to 19 end points on 11 species was found: Daphnia magna (mortality > Lemna minor (inhibition of new fronds > Paracheirodon innesi (strange swim = P. innesi (increase of opercula movement > Chironomus calligraphus (mortality > L. minor (necrosis > P. innesi (mortality > L. minor (chlorosis > Tetrapygus niger (inhibition of fertilization> Coturnix japonica (mortality > Oncorhynchus mykiss (increase of coloration > Ceraeochrysa

Consumo de nutrimentos por los frutos y bandolas de cafe caturra durante un ciclo de desarrollo y maduracion en Aquiares, Turrialba, Costa Rica

Directory of Open Access Journals (Sweden)

Floria Ramírez

2002-01-01

Full Text Available Con el fin de detenninar las etapas de ab- cosorci6n mas importantes durante el periodo de llenado del fruto de cafe, con miras a mejorar el suplemento de nutrimentos via fertilizaci6n fo- liar, se elabor6 una curva de absorci6n 0 acumu- laci6n de nutrimentos por los frutos y las bando- las de plantas de cafe, en la zona de Aquiares, Tu- rrialba. Esta zona presenta floraciones sucesivas, no obstante, se realiz6 un muestreo secuencial de bandolas (marcadas en el momento de maxima succefloraci6n de una plantaci6n de caturra de 2 afios de poda baja. Se clasific6 los frutos por tamafio de cada una de esas bandolas y se estableci6 la categoria de fruto dominante cada mes, a 10 largo de los 8 meses de desarrollo del fruto. Asi, se ela- bor6 la curva de consumo de nutrimentos por un domifruto, con la que se pudo establecer, para cada uno de los nutrimentos, especialmente los meno- res, los momentos de maxima absorci6n por el fruto y por 10 tanto los mas apropiados para reci- bir un suplemento foliar. A los 90 dias (3 meses despues del pico de floraci6n, todos los elemen- tos, excepto el K, han sido consumidos en un 50% del requisito total. Un programa de fertili- zaci6n foliar de elementos menores que quisiera apoyar efectivamente el curso de fonnaci6n, lle- nado y maduraci6n de frutos deberia incluir el suplemento de Zn y B preferiblemente a los 2,5 y 3,5 meses, y un adicional solo de B hacia el momento de lamaduracion, 6,5 meses. Las apli- caciones tardias de Zn no resultan pertinentes pues el consumo de ese elemento finaliza antes elede esa epoca. Otros elementos como el Mg, el N y el K serfan recomendables a los 2,5 y 6,5 me- ses. Si la plantacion tuviera necesidades particu- particulares de Ca, estas deberfan suplirse antes de los primeros 3 meses.

Fiscal 1997 R and D project on industrial science and technology under a consignment from NEDO. R and D of the technology of accelerated formation of bio-functions (R and D of the technology of creation of novel advanced enzymes); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Kasokugata seibutsu kino kochiku gijutsu no kenkyu kaihatsu (shingata kokino koso sosei gijutsu kaihatsu) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

This paper describes R and D on creation technique of novel advanced enzymes. In fiscal 1997, a novel mutagenesis technique was developed to obtain more kinds of mutational genes by shuffling between clonal genes as compared with the previous homogeneous recombination. A genotype- and phenotype-linking technology was developed by expressing random motifs (peptide as components of the active site of protein) on bacteria, and by developing a single-motif protein library. Study was made on a selection system for functional molecules of catalytic activities in a gene level, and a selection system for function of signal transduction. Analysis and evaluation study on vitro experimental technology can be efficiently promoted by recognizing the fitness landscape of target protein molecules. As a result, instead of the conventional method which needs several cycles of mutation and screening of 3-4 week/cycle, an efficient method possible to obtain multiple mutants was established. Research work was also promoted by various organizations to develop an accelerated formation technology of bio-functions. 68 refs., 51 figs., 14 tabs.

New Sunshine Program for fiscal 2000. Development of photovoltaic system commercialization technology - Development of thin-film solar cell manufacturing technology - Development of low-cost/large area module manufacturing technology (Development of novel amorphous solar cell module manufacturing technology); 2000 nendo New sunshine keikaku seika hokokusho. Taiyoko hatsuden system jitsuyoka gijutsu kaihatsu, Hakumaku taiyodenchi no seizo gijutsu kaihatsu, Tei cost dai menseki mojuru seizo gijutsu kaihatsu (Shingata amorufasu taiyo denchi mojuru no seizo gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Research and development was conducted for the development of amorphous solar cell modules for power generation, high in performance and low in production cost. In the effort to improve cell efficiency, experiments were conducted for enhancing bottom a-SiGe cell efficiency for the embodiment of an enhanced-efficiency multi-junction cell, for improving crystallinity in microcrystalline silicon through the application of VHF (very high frequency) plasma CVD (chemical vapor deposition), for texturizing metal electrodes on a film substrate, and so forth. In the effort to increase the film fabrication rate, a VHF plasma CVD device was used for studying the effect of the discharge frequency on film deposition and quality, Vpp between the electrodes, and so forth. Studies about the high-throughput production technology centered on the film substrate solar cell process technology and the designing of an optimum geometrical pattern for SCAF (series-connection through apertures formed on film) cells. Production cost was estimated for the SCAF structure film substrate solar cell manufacturing process, and a production cost of 147.1 yen/W (in case of 100 MW/year production) was obtained as achievable under the currently available conditions. (NEDO)

New Sunshine Program for fiscal 2000. Development of photovoltaic system commercialization technology - Development of thin-film solar cell manufacturing technology - Development of low-cost/large area module manufacturing technology (Development of novel amorphous solar cell module manufacturing technology); 2000 nendo New sunshine keikaku seika hokokusho. Taiyoko hatsuden system jitsuyoka gijutsu kaihatsu, Hakumaku taiyodenchi no seizo gijutsu kaihatsu, Tei cost dai menseki mojuru seizo gijutsu kaihatsu (Shingata amorufasu taiyo denchi mojuru no seizo gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Research and development was conducted for the development of amorphous solar cell modules for power generation, high in performance and low in production cost. In the effort to develop high-performance solar cells, optimum device designs including an advanced light confinement structure or the like were studied, and a 25% reduction in the total power generation layer thickness and a 7% increase in efficiency in power generation were consistently achieved in an a-Si/a-SiGe solar cell. In the effort to develop low-cost process technologies, as the result of studies involving the optimization of high-speed film fabrication requirements such as hydrogen dilution and a high-speed/high-precision patterning method and the like, an initial conversion efficiency of 11.2% was attained, which was the world high for a 90 cm times 90 cm-large a-Si/a-SiGe solar cell. This being equivalent to a post-stabilization efficiency of 10%, the fiscal 2000 target was achieved. A solar cell module production cost assessment was performed based on the result, and a module cost of 133 yen/W (in case of 100 MW/year production) was realized, which again meant the achievement of the fiscal 2000 target. (NEDO)

FY 1999 research and development of technologies for commercialization of photovoltaic power generation systems. Development of technologies for production of thin-film solar cells and low-cost, large-area modules (Development of technologies for high-reliability CdTe solar cell modules); 1999 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Usumaku taiyo denchi no seizo gijutsu kaihatsu / tei cost daimenseki module seizo gijutsu kaihatsu (koshinraisei CdTe taiyo denchi module no seizo gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The research and development project is implemented for production of low-cost, large-area modules of CdTe solar cells by the high-quality film-making process and high-function patterning, and the FY 1999 results are reported. The research program for the large-area TCO film-making technologies involves investigations on improvement of SnO{sub 2} film quality by the mist method and continuous film-making, which lead to continuous, stable production of 34 substrates of low resistance of 9.7{omega} on the average. The program for production of the large-area, thin-film CdS/CdTe solar cells involves production of TCO and CdS by the mist method, and patterning of the laminated TCO/CdS film by laser scribing. The CdTe film is formed by the atmospheric pressure CSS method, and treated with CdCl{sub 2} to improve its crystallinity. The CdTe film is patterned by sand blasting, and provided with the carbon and silver electrodes by screen printing, to complete the cell. The process is totally effected at the atmospheric pressure, needing no vacuum device. The CdTe solar cell assembly (130 cells connected in series, opening area: 5,413cm{sup 2}), fabricated on a trial basis, achieves a conversion efficiency of 10%. (NEDO)

Development in fiscal 1999 of technologies to put photovoltaic power generation systems into practical use. Development of thin film solar cell manufacturing technologies (Development of low-cost and large-area module manufacturing technologies, and new type amorphous solar cell manufacturing technologies); 1999 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Usumaku taiyo denchi no seizo gijutsu kaihatsu (tei cost daimenseki module seizo gijutsu kaihatsu (shingata amorphous taiyo denchi module no seizo gijutsu kaihatsu))

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

With an objective to put amorphous solar cells for power use into practical use, research and development has been performed on a low-cost mass production technology for modules with large area and less deterioration using film substrates. This paper summarizes the achievements in fiscal 1999. In developing an efficiency enhancing technology, development of an a-Si/a-SiGe/a-SiGe triple cell structure was launched, and discussions were given on band gaps, film forming conditions, and film thickness. In developing a film forming speed enhancing technology, systematic experiments were performed, as well as theoretical analysis on the film forming mechanism in the plasma CVD process. In developing the process technology for film substrate solar cells, with regard to an a-Si production device of the multi-chamber arranged stepping roll system, six plasma CVD chambers were increased to 13 chambers to improve the electrode forming speed and such processes as drilling low-cost substrates, and laser patterning. In trial fabrication of a triple cell, a module in which one row of the SCAF cell is laminated provided an initial efficiency of 9.64%. (NEDO)

Development of practical application technology for photovoltaic power generation systems in fiscal 1997. Development of technologies to manufacture next-generation thin film solar cells, development of technologies to manufacture CIS solar cell modules, development of technologies to increase high-quality film area; 1997 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu. Jisedai usumaku taiyo denchi module no seizo gijutsu kaihatsu, CIS taiyo denchi module no seizo gijutsu kaihatsu, kohinshitsumaku no daimensekika gijutsu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

With an objective to improve efficiency and reduce cost of CIS-based thin film solar cells, research and development has been made on technologies to increase high-quality CIS film area and technologies to increase speed in the manufacturing process. This paper describes the achievements attained during fiscal 1997. The research covered development of technologies to form high-grade Cu (In, Ga) Se{sub 2} (CIGS) film by using the multi-dimensional deposition process, component technologies for forming a rear electrode, a buffer layer and a transparent electrode, and patterning technologies. As a result of the research, thickness of the CIGS film was reduced to half as much as that of the conventional films, having achieved conversion efficiency of 13.1%, which corresponds to about 90% of the conventional CIGS solar cells. In addition, elucidation was made on the effect of an MoSe{sub 2} layer existing on interface with CIGS/Mo in a CIGS solar cell imposed on solar cell characteristics. In developing an Mo film laser scribing technology, intensity dependence of laser energy was made clear, the energy being required for scribing according to surface condition of the Mo film. (NEDO)

Achievement report for fiscal 1997 on development of technologies for practical photovoltaic system under New Sunshine Program. Manufacture of thin-film solar cell and of low-cost/large-area module (Manufacture of high-reliability CdTe solar module); 1997 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Usumaku taiyo denchi no seizo gijutsu kaihatsu, tei cost daimenseki module seizo gijutsu kaihatsu (koshinraisei CdTe taiyo denchi module no seizo gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The target is a low-cost CdS/CdTe solar cell of a large area (60cm times 90cm), the establishment of mass-production technologies for the cell, and the enhancement of production efficiency. A thin film formation technology of subjecting CdS film organic metal to pyrolysis is established, which reduces photoabsorption loss in the shortwave domain of wavelength of not longer than 500nm, reduces reflection loss in the film, and improves on short-circuit current density. Improvement is also achieved on CdTe film quality and junction quality by use of a proximity sublimation method in a vacuum, when a conversion rate of 16.0% (1cm{sup 2}) is attained which is the highest in the world. Based on the results of the above-said efforts, a 3.3mm-thick glass substrate is employed for CdTe film to develop into a 30cm times 60cm-large size, with the film thereon uniformly thick over a large area thanks to a normal pressure proximity sublimation method. Studies are made toward a process nearer to the ultimate product and, using the patterning technique, a 30cm times 60cm-large CdTe solar cell is tentatively built realizing a conversion rate of 9.8%. (NEDO)

Fiscal 1999 research and development of technologies for practical application of photovoltaic power generation systems. Development of thin-film solar cell manufacturing technology (Development of material/substrate manufacturing technology - Development of amorphous silicon-based high-quality material/substrate manufacturing technology); 1999 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu seika hokokusho. Usumaku taiyo denchi no seizo gijutsu kaihatsu (zairyo kiban seizo gijutsu kaihatsu - amorphous silicon kei kohinshitsu zairyo kiban no seizo gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The project aims to enhance the stability of amorphous solar cells. For elevating TCO (transparent conductive oxide) substrate transmittance to an ultrahigh level and for obtaining amorphous layers less to suffer photodegradation, efforts were made to develop substrate materials stable upon exposure to plasma and low in defect density. In the study of TCO, a high-transmittance glass substrate was employed and TCO was made thinner, and the specimen achieved transmittance of 91.3% or 6.3% over that of the conventional type. In the study of low reflection films, it was found that their transmittance came to be stable and remain so after 150 days after a weatherproof test. In the study for stability enhancement, optimization was carried out for a plasma resisting Ga{sub 2}O{sub 3}-added ZnO film for the manufacture of a substrate material capable of properly behaving in a high-speed a-Si film fabrication process. Low-temperature film fabrication was studied to enable low-cost manufacturing, and it was learned that a 4 times 10{sup -4} ohm/cm low-resistance film was obtained by sputtering Ga{sub 2}O{sub 3}-added ZnO where magnetism was intensive at room temperature, that films excellent in crystallinity were obtained by the same method even at low temperatures, and so forth. (NEDO)

Fiscal 1997 R and D project on industrial science and technology under a consignment from NEDO. R and D of the ultimate manipulation technology of atoms and molecules (R and D of the formation of advanced materials for power generation environment); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Genshi bunshi kyokugen sosa gijutsu no kenkyu kaihatsu seika hokokusho (hatsuden kankyoyo kokino sozai keisei gijutsu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

This paper describes R and D of the ultimate manipulation technology of atoms and molecules (atom technology). Ten nanoscale Ge islands were successfully formed in proper positions on an Si substrate surface by using mask technology of nanoscale atomic layers. Growth of less-defect ZnSe films on a GaAs(110) surface was possible under various conditions. The magnetic transfer mechanism of Mn oxide with huge reluctance was clarified. Through study on selective-area deposition of Si on plasma-oxidized ultrathin SiO2 mask layers patterned by direct electron-beam exposure and an idea of SiO2/SiNx bilayer mask, direct use of the ultrathin mask layer as insulating layer in device structure was achieved. The superior property as electron beam resist of methano- fullerene composed of fullerene C60 with side chains including oxygen was clarified. The initial oxidation process of an Si(100) surface was analyzed, and the observation result by SREM was theoretically explained. Development of a high-resolution spin polarization electron microscope was also mentioned. 48 refs., 145 figs., 20 tabs.