The New Keynesian Phillips Curve
DEFF Research Database (Denmark)
Ólafsson, Tjörvi
This paper provides a survey on the recent literature on the new Keynesian Phillips curve: the controversies surrounding its microfoundation and estimation, the approaches that have been tried to improve its empirical fit and the challenges it faces adapting to the open-economy framework. The new......, learning or state-dependant pricing. The introduction of openeconomy factors into the new Keynesian Phillips curve complicate matters further as it must capture the nexus between price setting, inflation and the exchange rate. This is nevertheless a crucial feature for any model to be used for inflation...... forecasting in a small open economy like Iceland....
Mavroeidis, S.
2005-01-01
Limited-information methods are commonly used to estimate forwardlooking models with rational expectations, such as the "New Keynesian Phillips Curve" of Galí and Gertler (1999). In this paper, we address issues of identification that have been overlooked due to the incompleteness of the
Implications Of Aggregate Demand Elasticity For The Phillips Curve
Ben L. Kyer; Gary E. Maggs
2004-01-01
While the general relationship between the aggregate supply curve and the Phillips curve is recognized, the importance of aggregate demand and, in particular, aggregate demand elasticity, for the inflation-unemployment relationship has been untreated. We believe, however, that the elasticity of aggregate demand with respect to the general price level does have some significance for the short-run Phillips curve since, on a general level, the economy's equilibrium price level, inflation rate, r...
Directory of Open Access Journals (Sweden)
Fernando Motta Correia
2011-08-01
Full Text Available Este artigo apresenta novos argumentos para alguns dos fatos estilizados, recentemente, sobre a dinâmica da inflação, apontados por Mishkin (2007, quais sejam: a a persistência dos choques de inflação estão declinando; b a curva de Phillips esta se tornando mais horizontal e; c a inflação tem se mostrado menos reativa à choques nos preços. É abordado o problema da determinação da oferta agregada em que alegamos que a versão novokeynesiana da curva de Phillips, apesar dos avanços, ainda não incorpora os determinantes da ampliação do produto potencial e, que esta inclusão é uma das explicações para os fatos estilizados (fato b, revelados recentemente por Mishkin.This paper presents new arguments for some recent stylized facts about the dynamics of inflation shown by Mishkin (2007, which are: a the persistence of inflation shocks are declining; b the Phillips' curve of this becoming more horizontal and; c inflation has been less reactive to shocks on prices. It addressed the problem of determining the aggregate supply where the new version of the Keynesian Phillips' curve, that despite progress, not yet incorporating the determinants of the expansion potential of the product and that this inclusion is one of the explanations for stylized facts (fact b revealed recently by Mishkin.
Empirical Analysis on The Existence of The Phillips Curve
Directory of Open Access Journals (Sweden)
Shaari Mohd Shahidan
2018-01-01
Full Text Available The Phillips curve shows the trade-off relationship between the inflation and unemployment rates. A rise in inflation due to the high economic growth, more jobs are available and therefore unemployment will fall. However, the existence of the Phillips curve in high-income countries has not been much discussed. Countries with high income should have low unemployment rate, suggesting a high inflation. However, some high-income countries, the United States in 1970s for example, could not avert stagflation whereby high unemployment rate and inflation occurred in the same time. This situation is contrary to the Phillips curve. Therefore, this study aims to investigate the existence of the Phillips curve in high-income countries for the period 1990-2014 using the panel data analysis. The most interesting finding of this study is the existence of a bidirectional relationship between unemployment rate and inflation rate in both long and short runs. Therefore, the governments should choose to stabilize inflation rate or reduce unemployment rate
Real wage rigidity and the new Phillips curve: the Brazilian case
Directory of Open Access Journals (Sweden)
Antonio Alberto Mazali
2010-09-01
Full Text Available The new Keynesian Phillips curve has been criticized for not explaining the short-run inflation-output gap trade-off. Blanchard and Galí (2007 introduced real wage rigidity and derived a trade-off between stabilizing inflation and the gap between actual and efficient output. This paper estimates the new Phillips curve for the Brazilian economy, computes short-run trade-off, analyzes real wage rigidity, and tests theoretical restrictions imposed by the model. The GMM estimations fit the data very well and all theoretical restrictions are satisfied. There is strong real wage rigidity and a high output-gap cost to stabilize inflation in the short run.A curva de Phillips novo-keynesiana tem sido criticada por não explicar o trade-off de curto prazo entre inflação-hiato do produto. Blanchard e Galí (2007 introduziram a rigidez do salário real e derivaram um trade-off entre estabilizar inflação ou estabilizar hiato entre produto real e eficiente. Neste artigo estima-se essa nova curva para a economia brasileira, calcula-se o trade-off, analisa-se a rigidez do salário real e testa-se restrições teóricas do modelo. Estimações GMM adequam-se bem aos dados e todas as restrições teóricas são satisfeitas. Há forte rigidez do salário real e alto custo de hiato do produto para estabilizar inflação no curto prazo.
Fixing the Phillips curve: The case of downward nominal wage rigidity in the US
Reitz, Stefan; Slopek, Ulf D.
2012-01-01
Whereas microeconomic studies point to pronounced downward rigidity of nominal wages in the US economy, the standard Phillips curve neglects such a feature. Using a stochastic frontier model we find macroeconomic evidence of a strictly nonnegative error in an otherwise standard Phillips curve in post-war data on the US nonfinancial corporate sector. This error depends on growth in the profit ratio, output, and trend productivity, which should all determine the flexibility of wage adjustments....
Antagonisms in the Phillips Curves with a positive slope: Mexico and Spain’s case
Directory of Open Access Journals (Sweden)
Rubén E. Roa Dueñas
2002-01-01
Full Text Available This document presents the indispensable theoretical aspects of the Phillips curve, as well as its evolution. A brief relation of the causes and effects of the Mexican 1994 crisis, as well as the consequent and visible noncompliance of the Phillips input. In same way we present the inclusion of Spain to the European Economic Community through the consummation of the Maastricht Treaty, its environment and some of its consequences, whose economy usually shows a vigorous and prosperous character. We conclude that the so-called inverted relation between unemployment and inflation which grossly shows the Phillips curve and the situations that do not comply with that norm, take us to a debate about the scenery and the required tools used by the different economies to try to defeat this theory, tending to direct the curve to the beginning, such as the Spain case. We can mention that it is not that important to defeat it in theory, but to generate the required conditions to consolidate the economy, as a future platform of sustained social and economical development.
A Phillips curve interpretation of error-correction models of the wage and price dynamics
DEFF Research Database (Denmark)
Harck, Søren H.
-correction setting, which actually seems to capture the wage and price dynamics of many large- scale econometric models quite well, is fully compatible with the notion of an old-fashioned Phillips curve with finite slope. It is shown how the steady-state impact of various shocks to the model can be profitably...... This paper presents a model of employment, distribution and inflation in which a modern error correction specification of the nominal wage and price dynamics (referring to claims on income by workers and firms) occupies a prominent role. It is brought out, explicitly, how this rather typical error...
A Phillips curve interpretation of error-correction models of the wage and price dynamics
DEFF Research Database (Denmark)
Harck, Søren H.
2009-01-01
-correction setting, which actually seems to capture the wage and price dynamics of many large- scale econometric models quite well, is fully compatible with the notion of an old-fashioned Phillips curve with finite slope. It is shown how the steady-state impact of various shocks to the model can be profitably......This paper presents a model of employment, distribution and inflation in which a modern error correction specification of the nominal wage and price dynamics (referring to claims on income by workers and firms) occupies a prominent role. It is brought out, explicitly, how this rather typical error...
Two Different Views on Monetary Policy Impact: The New Consensus and Post-Keynesian Economics
Directory of Open Access Journals (Sweden)
Marius-Corneliu Marinas
2007-09-01
Full Text Available The objective of this study is to make a synthesis of the differences between two new macroeconomic views. A New Consensus has arisen among neoclassical and New-Keynesian economists, such as Romer, Taylor and Walsh. This new view seeks to redefine the application of monetary policy by re-specifying the most appropriate monetary rule, which is used for inflation targeting. The framework of the monetary policy impact requires the usage of a expectations augmented Phillips curve, characterized through the lack of trade-off inflation-unemployment in the long-run. Post-keynesian macroeconomic critical, whose promoters are Arestis, Lavoie and Satterfield, argues that for most of the production levels obtained output change has no effect on inflation. This is a re-formulation of the Keynesian aggregate supply curve, which is entirely horizontal.
Directory of Open Access Journals (Sweden)
Maichal Maichal
2012-12-01
Full Text Available This paper aims to analyze the existence of the Philips curve in the Indonesian economy, 2000Q1-2010Q3. The results obtained by using OLS method shows that the expectations augmented Philips curve and the New Keynesian Philips curve models cannot give a clear results of Philips curve existence in the Idonesia economy. Shocks variable such as percentage change of exchange rates and crude oil prices provide a very small effect on the inflation rate in Indonesia. Furthermore, the results obtained by using GMM method on the hybrid model of the New Keynesian Philips curve shows that the Philips curve exists in the Indonesian economy.
Estimación de la Curva de Phillips neokeynesiana para Colombia: 1990-2006
Directory of Open Access Journals (Sweden)
Juan Camilo Galvis Ciro
2010-12-01
Full Text Available This paper seeks to verify empirically the existence of a New Keynesian Phillips curve for the Colombian economy. This allows determining if inflation dynamics are likely explained by microeconomic foundations. Additionally, this approach enables the analysis of price rigidities in the economy. The results suggest that: (1 unit labor costs explain inflation dynamics; (2 eighty percent of firms set their prices every five quarters; and, (3 productivity changes explain marginal costs.
Persistência inflacionária e curva de Phillips novo-keynesiana para o Brasil
Directory of Open Access Journals (Sweden)
Fernando de Aquino Fonseca Neto
2010-06-01
Full Text Available Inflation persistence and new Keynesian Phillips curves for Brazil. In this paper is shown that sustainable inflation persistence has theoretical support not only due price indexation, but also because of micro-foundations based on assumptions of Simon's bounded rationality and because of persistent mark-up shocks. the new keynesian phillips curve, estimated for brazil for the period 2000/2008, and the partial coefficients of determination for moving sub-periods of 36 months identifies inflation persistence as the main determinant of inflation, with the capacity gap presenting larger importance only in the end of the sample period. Inflation persistence requires harder monetary policy when neither accommodation is acceptable nor complementary policies in order to reduce it, such as the minimization of indexation mechanisms and control of the market power, are adopted.
GLOBAL KEYNESIANISM AND BEYOND
Directory of Open Access Journals (Sweden)
Gernot Kohler
2015-08-01
Full Text Available Something like "global Keynesianism" or "transnational socialism" has been mentioned as a desirable alternative to global neoliberalism (Redmond 1997. However, a definition of this kind of global Keynesianism is hard to find. Many leftists tend to associate Keynesianism with corporate power. However, there are also numerous other leftists who view this differently. For example, a member of parliament for the German Green Party stated in a recent interview that "a reformist party today has to be a left-Keynesian party which contradicts the logic of capital" (Ebermann 1998. A number of scholars from several countries, including Canada, pursue post-Keynesian-ism, in the sense of left-Keynesian economics (e.g., Seccareccia 1991. How-ever, available left-Keynesian literature, as I see it, is lacking a world-system perspective. I am trying in this article to synthesize the two perspectives-namely, left-Keynesianism and world-system theory, leading to a perspective of global left-Keynesianism. This leftist global Keynesianism can, perhaps, be described as an approach to economics which emphasizes responsible public management of economic problems in a world-system context. Common themes in global Keynesianism include the importance of public management, democratic politics, the mixed economy, global income distribution, the management of global demand, investment and money, ecological sustainability and the importance of multiple levels of public management-local, national, regional and global.
The Reincarnation of Keynesian Economics
N. Gregory Mankiw
1991-01-01
This paper discusses the reemergence of Keynesian economics during the past decade. It highlights the substantial differences between new Keynesian economics and the convictions of early Keynesians. In particular, it points out that new Keynesians have adopted many views that were once considered "monetarist" or "classical." It concludes that the term "Keynesian" may have outlived its usefulness.
La tasa natural de desempleo: crítica a la curva de Phillips
Directory of Open Access Journals (Sweden)
Oliva Sierra García
1987-07-01
Full Text Available This article synthesizes the theoretical foundations of Milton Friedman's formulations of the natural rate of unemployment. From the neoclassical perspective his theory challenged the standard policy recommendations which arise from the existence of a long run Phillips curve, via, the possibility of reducing the long run rate of unemployment at the cost of a higher rate of inflation. The concluding section of the paper highlights the economic and policy implications of the natural rate in juxtaposition with those which arise from a Keynesian perspective.
Directory of Open Access Journals (Sweden)
Jana Hromcová
2009-12-01
Full Text Available Recomendamos un ejercicio numérico que permite a los estudiantes observar la dinámica de un simple modelo, compuesto por la curva de Phillips, ley de Okun y demanda agregada, ante variaciones en la política monetaria. El ejercicio tiene como objetivo enseñar a los estudiantes la importancia de la manera en la que se forman las expectativas y la (nocredibilidad del banco central para el cumplimiento de los objetivos de la política monetaria.Monetary Policy in the Expectations Model, Phillips Curve: A Computer Practice
Directory of Open Access Journals (Sweden)
Nico Gianluigi
2014-12-01
Full Text Available This paper aims to provide empirical evidence about the theoretical relationship between inflation and unemployment in 9 European countries. Based on two major goals for economic policymakers namely, to keep both inflation and unemployment low, we use the ingredients of the Phillips curve to orient fiscal and monetary policies. These policies are prerogative for the achievement of a desirable combination of unemployment and inflation. More in detail, we attempt to address two basic issues. One strand of the study examines the size and sign of the impact of unemployment rate on percentage changes in inflation. In our preferred econometric model, we have made explicit the evidence according to which one unit increase (% in unemployment reduces inflation of roughly 0.73 percent, on average. Next, we turn to the question concerning the causal link between inflation and unemployment and we derive a political framework enables to orient European policymakers in the implementation of either fiscal or monetary policy. In this context, by means of the Granger causality test, we mainly find evidence of a directional causality which runs from inflation to unemployment in 4 out of 9 European countries under analysis. This result implies that political authorities of Austria, Belgium, Germany and Italy should implement monetary policy in order to achieve pre-established targets of unemployment and inflation. In the same context, a directional causality running from unemployment to inflation has been found in France and Cyprus suggesting that a reduction in the unemployment level can be achieved through controlling fiscal policy. However, succeeding in this goal may lead to an increasing demand for goods and services which, in turn, might cause a higher inflation than expected. Finally, while there is no statistical evidence of a causal link between unemployment and inflation in Finland and Greece, a bidirectional causality has been found in Estonia. This
The fallacies of Keynesian policies
Carchedi, G.
2006-01-01
This article examines the effectiveness of Keynesian policies from the perspective of Marxian value theory. It starts from a sketch of the economic cycle, whose ultimate cause is identified in the decreasing production of (surplus) value following technological innovations, and argues that the
HOW TO DERIVE KEYNESIAN RESULTS FROM 1ST PRINCIPLES - A SURVEY OF NEW-KEYNESIAN ECONOMICS
VANEES, H; GARRETSEN, H
1993-01-01
In the 1980s theoretical research in macroeconomics was dominated by what has become known as new-Keynesian economics. The principal aim of new-Keynesian economics is to explain how Keynesian results can be reconciled with the neo-classical principles of utility and profit maximization. This paper
Disequilibrium dynamics in a Keynesian model with time delays
Gori, Luca; Guerrini, Luca; Sodini, Mauro
2018-05-01
The aim of this research is to analyse a Keynesian goods market closed economy by considering a continuous-time setup with fixed delays. The work compares dynamic results based on linear and nonlinear adjustment mechanisms through which the aggregate supply (production) reacts to a disequilibrium in the goods market and consumption depends on income at a preceding date. Both analytical and geometrical (stability switching curves) techniques are used to characterise the stability properties of the stationary equilibrium.
Keynesian multiplier versus velocity of money
Wang, Yougui; Xu, Yan; Liu, Li
2010-08-01
In this paper we present the relation between Keynesian multiplier and the velocity of money circulation in a money exchange model. For this purpose we modify the original exchange model by constructing the interrelation between income and expenditure. The random exchange yields an agent's income, which along with the amount of money he processed determines his expenditure. In this interactive process, both the circulation of money and Keynesian multiplier effect can be formulated. The equilibrium values of Keynesian multiplier are demonstrated to be closely related to the velocity of money. Thus the impacts of macroeconomic policies on aggregate income can be understood by concentrating solely on the variations of money circulation.
Post-Keynesianism: Evolution of Keynesian Macroeconomics in the 20 Century
Directory of Open Access Journals (Sweden)
Lyubov N. Artamonova
2016-01-01
Full Text Available The article analyzes the development of J.M. Keynes's theory in the second half of the twentieth century due to the works within the new direction of economical science - Post-Keynesianism. It is shown that in free-market economy Keynesian school based of the original Keynesian methodology requires additional studies of state regulation principles and take into account the qualitative changes in the market mechanisms. It is shown that post-Keynesianism has had a significant impact on the subject of research and has taken into account the principles of free enterprise, market pricing, level of price dynamics. All this principles allow realizing the principle of self-regulation of the market mechanism. New approaches to the post-Keynesians role of the state and state regulation combined with the freedom of entrepreneurship are analyzed. Taking into account real changes and economic crises it is necessary to analyze the main directions of development of the Keynesian model of economic regulation with a view to their effective use in shaping economic policy. There are considered the basic directions of development of post-Keynesianism such as Neo-Ricardian theory of value and prices of goods based on direct costs of production in the framework of macroeconomic model by P. Sraffa, information theory of "fundamental" uncertainty of the future by R. Klauder and the theory of financial instability hypothesis by H. Minsky. Their differences within the framework of post-Keynesianism under the subject specialization are considered. It is noted that the development of PostKeynesianism allows to present the latest research in modern Keynesian school within an interdisciplinary approach to economical problems.
The Keynesian Diagram: A Cross to Bear?
Fleck, Juergen
In elementary economics courses students are often introduced to the basic concepts of macroeconomics through very simplified static models, and the concept of a macroeconomic equilibrium is generally explained with the help of an aggregate demand/aggregate supply (AD/AS) model and an income/expenditure model (via the Keynesian cross diagram).…
Keynes, family allowances and Keynesian economic policy
Pressman, Steven
2014-01-01
This paper provides a short history of family allowances and documents the fact that Keynes supported family allowances as early as the 1920s, continuing through the 1930s and early 1940s. Keynes saw this policy as a way to help households raise their children and also as a way to increase consumption without reducing business investment. The paper goes on to argue that a policy of family allowances is consistent with Keynesian economics. Finally, the paper uses the Luxembourg Income Study to...
Phillips Petroleum -- Capitalizing on technology
International Nuclear Information System (INIS)
Perdue, J.M.
1996-01-01
Phillips Petroleum Co., one of the largest international oil companies and the largest producer of natural gas liquids in the US, recently reported that first half 1996 net income was $916 million, up from $224 million for the same period the year before. During the past 5 years, reserves have increased 11% and production by 8%. Exploration expenses are down 32% and production costs per boe are down 24%. Compared to other majors involved in worldwide E and P, Phillips has the second highest 5-year percentage of reserves replacement--117%--and the second lowest finding and development cost/boe--$3.46--in the industry. How did the company do this while decreasing headcount by 5,300? The paper discusses focused growth, paring down assets, E and P projects, research and development, and electronic document management
Nonlinear complex dynamics and Keynesian rigidity: A short introduction
Jovero, Edgardo
2005-09-01
The topic of this paper is to show that the greater acceptance and intense use of complex nonlinear dynamics in macroeconomics makes sense only within the neoKeynesian tradition. An example is presented regarding the behavior of an open-economy two-sector growth model endowed with Keynesian rigidity. The Keynesian view that structural instability globally exists in the aggregate economy is put forward, and therefore the need arises for policy to alleviate this instability in the form of dampened fluctuations is presented as an alternative view for macroeconomic theorizing.
Phillips Laboratory small satellite initiatives
Lutey, Mark K.; Imler, Thomas A.; Davis, Robert J.
1993-09-01
The Phillips Laboratory Space Experiments Directorate in conjunction with the Air Force Space Test Program (AF STP), Defense Advanced Research and Projects Agency (DARPA) and Strategic Defense Initiative Organization (SDIO), are managing five small satellite program initiatives: Lightweight Exo-Atmospheric Projectile (LEAP) sponsored by SDIO, Miniature Sensor Technology Integration (MSTI) sponsored by SDIO, Technology for Autonomous Operational Survivability (TAOS) sponsored by Phillips Laboratory, TechSat sponsored by SDIO, and the Advanced Technology Standard Satellite Bus (ATSSB) sponsored by DARPA. Each of these spacecraft fulfills a unique set of program requirements. These program requirements range from a short-lived `one-of-a-kind' mission to the robust multi- mission role. Because of these diverging requirements, each program is driven to use a different design philosophy. But regardless of their design, there is the underlying fact that small satellites do not always equate to small missions. These spacecraft with their use of or ability to insert new technologies provide more capabilities and services for their respective payloads which allows the expansion of their mission role. These varying program efforts culminate in an ATSSB spacecraft bus approach that will support moderate size payloads, up to 500 pounds, in a large set of orbits while satisfying the `cheaper, faster, better' method of doing business. This technical paper provides an overview of each of the five spacecraft, focusing on the objectives, payoffs, technologies demonstrated, and program status.
Population ageing and intergenerational conflict: a post-Keynesian view.
Jackson, W A
1992-01-01
The author reexamines the relationships among demographic aging, the dependency burden, and intergenerational conflict from a post-Keynesian perspective, in which unemployment and excess capacity are normal to the functioning of capitalist economies, and resources are not generally fully utilized. He "argues that the Keynesian process of national income determination precludes any immediate relationship between population ageing and the 'burden' imposed on income recipients. Below full employment, a rising dependency ratio is not guaranteed to reduce the expenditure share of income recipients or raise their tax rates. An exclusive emphasis on intergenerational conflict can give a misleading impression of the consequences of population ageing." The focus is on developed countries. excerpt
ConocoPhillips Gas Hydrate Production Test
Energy Technology Data Exchange (ETDEWEB)
Schoderbek, David [ConocoPhillips Co., Houston, TX (United States); Farrell, Helen [ConocoPhillips Co., Houston, TX (United States); Howard, James [ConocoPhillips Co., Houston, TX (United States); Raterman, Kevin [ConocoPhillips Co., Houston, TX (United States); Silpngarmlert, Suntichai [ConocoPhillips Co., Houston, TX (United States); Martin, Kenneth [ConocoPhillips Co., Houston, TX (United States); Smith, Bruce [ConocoPhillips Co., Houston, TX (United States); Klein, Perry [ConocoPhillips Co., Houston, TX (United States)
2013-06-30
Work began on the ConocoPhillips Gas Hydrates Production Test (DOE award number DE-NT0006553) on October 1, 2008. This final report summarizes the entire project from January 1, 2011 to June 30, 2013.
Economics of natural resources. [Post-Keynesian economic theory
Energy Technology Data Exchange (ETDEWEB)
Davidson, P.
1979-03-01
The current world energy crisis illustrates the importance of analyzing, as a post-Keynesian approch does, such factors as monopoly power and user costs in trying to understand the production flows and market prices of natural resources - when these flows and prices are changing rapidly and unexpectedly in the face of slowly expanding world output. Post-Keynesian analysts do not immediately see rising natural resource prices as evidence per se that the law of dimmishing returns is operating in perfectly competitive market - or, in other words, that we are running out of cheap energy and other raw materials. A post-Keynesian perspective would instead suggest that such price changes can best be understood (and an appropriate policy response formulated) by analyzing the behavior of entrepreneurial agents and resource property owners in terms of perceived market power and/or expectations about the future. In this connection, Keynes' concept of user cost is a critical one. Keynes recognized that the user cost concept applied not only to raw materials such as fossil fuels, but to all capital equipment, for in deciding his scale of production an entrepreneur has to exercise a choice between using up his equipment now and preserving it to be used later on. For those who adopt the post-Keynesian approach to economic analysis, the decision to utilize natural resouces is viewed as similar to that of disinvestment in capital equipment, while the search for new sources of natural resources is merely a form of capital investment.
Teaching New Keynesian Open Economy Macroeconomics at the Intermediate Level
Bofinger, Peter; Mayer, Eric; Wollmershauser, Timo
2009-01-01
For the open economy, the workhorse model in intermediate textbooks still is the Mundell-Fleming model, which basically extends the investment and savings, liquidity preference and money supply (IS-LM) model to open economy problems. The authors present a simple New Keynesian model of the open economy that introduces open economy considerations…
Keynesian Theory in "Macroeconomics" Course for non-core faculties
Directory of Open Access Journals (Sweden)
Tatyana Ivanovna Kurnosova
2016-01-01
Full Text Available The article deals with the issues related to the teaching of Keynesian theory within the scope of macroeconomics course at the faculties of non-economic professions. It highlights the relevance of Keynes' ideas, the importance of the system approach typical for Keynesian theory that is in particular reflected in the understanding of the connection between economics large-scale processes on the whole and micro-level phenomena. The authors draw special attention to the importance of selecting the sections of Keynesian theory to be included in the economics short course in order to avoid overlooking the scientific significance of the material/data and to retain the essential achievements of the scientist. It refers to the balance of non-financial sector and labor market, to the idea of joint equilibrium in goods and money markets. Particular attention is dedicated to the recognition of the roles of both market and government stated by Keynes. This essential feature of the theory should be reflected in providing educational material. The authors underline that while studying the issues related to such terms as consumption, capital accumulation, investment and money demand, it is necessary to point out the role of psychological factors. These aspects of Keynesian analysis are of key importance for the economic processes' construction. Moreover, they have predetermined the direction of macroeconomics studies for the subsequent decades. Special attention in the article is also paid to the students’ motivation as one of the conditions for mastering the material taught.
The return to keynesianism in overcoming cyclical fluctuations?
Directory of Open Access Journals (Sweden)
Praščević Aleksandra
2008-01-01
Full Text Available The problems faced by the American economy in the second half of 2007, which intensified in 2008, have once again asked economic science, and even more so economic policy, questions relating to business cycles - the reasons for cyclical fluctuations, the character of business cycles and, naturally, economic policy measures that can be implemented to alleviate and overcome an economic recession. Since the 1970s, business cycle theories have been intensively developed - ranging from monetary theories, developed within monetarism and the first phase of New Classical Macroeconomics, to the real business cycle theory of New Classical Macroeconomics. Consequently, the triggers for the beginning of a cycle can be monetary (monetary theories or real in the form of technological shocks (real business cycles. In essence economic policy conducted since the 1970s, has rejected the Keynesian explanations of the functioning of the economic system, and thus the policy of aggregate demand management. However, the measures that are now being implemented in the USA point to a return to Keynesianism. This refers, above all, to attempts to compensate for the inefficiency of monetary policy with fiscal expansion. All three psychological propensities (propensity to consume, propensity to invest and liquidity preference in Keynes's theory and applied in Keynesian economic policy, are still the significant determinants of monetary and fiscal policies. The return to Keynesianism points to the depth of the crisis faced by the USA, but also confirms the vitality of Keynesian economics and affirms the view that - although Keynes wished to present his theory as being "general" - it is actually the theory of economic depression.
Owen Martin Phillips (1930-2010)
Olson, Peter
2011-02-01
Owen Martin Phillips, a pioneer in geophysical fluid dynamics, died at home on 13 October 2010 in Chestertown, Md., at the age of 79. To his many friends and colleagues, Phillips was an inspirational and gracious person who combined a deep intellect, a lively spirit, and a generous heart that matched his passionate interest in the geophysical sciences. Phillips was born on 30 December 1930 in Parramatta, N. S. W., Australia. In 1948 he enrolled in the University of Sydney, where he earned a B.S. in applied mathematics in 1952. That same year, he joined the Cavendish Laboratory at Cambridge University as a research student, where he began to apply to the ocean concepts in turbulent flow recently developed by Andrei Kolmogorov, G. I. Taylor, and George Batchelor. While attending the 1956 celebration of Taylor's seventieth birthday, Phillips heard Fritz Ursell declare that “the process by which ocean waves are generated by the wind cannot be regarded as known.” In 1957 the Journal of Fluid Mechanics contained two remarkable papers offering contrasting theories for ocean wave generation. One paper, by the applied mathematician John Miles (J. Fluid Mech., 2(5), 417-445, 1957), proposed that energy transfer from the air to the sea occurs at a critical layer in the atmosphere boundary layer. The other paper, by Phillips, then 26 years old (J. Fluid Mech., 3(2), 185-204, 1957), proposed that turbulent pressure fluctuations in the wind resonate with propagating ocean waves, forcing them to grow. Together these became known as the Phillips-Miles process, and it was the opening salvo in Phillips's 50-year career of innovative contributions to geophysics through fluid mechanics.
A New Keynesian Perspective on the Great Recession
Peter N. Ireland
2010-01-01
With an estimated New Keynesian model, this paper compares the "Great Recession" of 2007-09 to its two immediate predecessors in 1990-91 and 2001. The model attributes all three downturns to a similar mix of aggregate demand and supply disturbances. The most recent series of adverse shocks lasted longer and became more severe, however, prolonging and deepening the Great Recession. In addition, the zero lower bound on the nominal interest rate prevented monetary policy from stabilizing the US ...
The Keynesian Approach of Business Cycle and Economic Crises and its Criticism
Directory of Open Access Journals (Sweden)
Ionela Bălțătescu
2009-10-01
Full Text Available The main purpose of this article is to briefly present the Keynesian explanation of business cycle, economic fluctuation and crises, and also the solutions proposed from Keynesian perspective to the economic problems that characterize the bust phases of the business cycles (unemployment, recessions. In the fourth section of the article some criticisms of the Keynesian theoretical approach of the economic crises are considered and summarized.
Intermediation, Money Creation, and Keynesian Macrodynamics in Multi-agent Systems
Bill Gibson; Mark Setterfield
2015-01-01
Keynesian economists refer to capitalism as a monetary production economy, in which the theory of money and the theory of production are inseparable (Skidelsky, 1992). One important aspect of this, brought to light by Robertson following the publication of The General Theory, is that in a Keynesian economy, endogenous money creation is logically necessary if the economy is to expand. A Keynesian economy cannot operate with an exogenously given supply of money as in verticalism. One way to ens...
To Save or to Consume: Linking Growth Theory with the Keynesian Model
Kwok, Yun-kwong
2007-01-01
In the neoclassical growth theory, higher saving rate gives rise to higher output per capita. However, in the Keynesian model, higher saving rate causes lower consumption, which may lead to a recession. Students may ask, "Should we save or should we consume?" In most of the macroeconomics textbooks, economic growth and Keynesian economics are in…
The adverse effects of government spending on private consumption in New Keynesian Models
Kuehn, S.; Veen, van A.P. (Tom); Muysken, J.
2009-01-01
Empirical evidence shows that government spending crowds in private consumption, a Keynesian phenomenon. The current state of the art, New Keynesian models based on optimising households and firms, is not able to predict such a result. We show with a graphical framework as well as a formal model why
Dynamics in a nonlinear Keynesian good market model
International Nuclear Information System (INIS)
Naimzada, Ahmad; Pireddu, Marina
2014-01-01
In this paper, we show how a rich variety of dynamical behaviors can emerge in the standard Keynesian income-expenditure model when a nonlinearity is introduced, both in the cases with and without endogenous government spending. A specific sigmoidal functional form is used for the adjustment mechanism of income with respect to the excess demand, in order to bound the income variation. With the aid of analytical and numerical tools, we investigate the stability conditions, bifurcations, as well as periodic and chaotic dynamics. Globally, we study multistability phenomena, i.e., the coexistence of different kinds of attractors
Keynesian Substantiation of the Marketing Policies in Local Development
Directory of Open Access Journals (Sweden)
Lucica MATEI
2010-06-01
Full Text Available The local development means the existence of several goods and services and their performance, expressed through adequate marketing policies, thus determining the overall development performance.The paper approaches the economic fundamental issues of local development and in this context it determines the basic components of public service marketing, relevant for local development: price, multiplier of revenues/expenditures, respectively the export multiplier.Those elements will express the ratios between resources and outcomes and their balance is based on a Keynesian model in an open economy.
Brazil responses to the international financial crisis: A successful example of Keynesian policies?
Directory of Open Access Journals (Sweden)
Moreira Cunha André
2011-01-01
Full Text Available The paper analyses the economic policy responses of the Brazilian government to the international financial crisis. In doing so, the paper aims to answer a specific question: Can the economic policies implemented in 2008-09 be identified as Keynesian economic policies? It concludes that, despite the fact the Brazilian economic policies response to the international financial crisis seems remember Keynesian economic policies, it is not possible to argue that the recovery of the Brazilian economy can be considered a Keynesian showcase.
Agrodiversity in the Cayon-Phillips Cooperative
Directory of Open Access Journals (Sweden)
Eric Philbert Browne
2016-06-01
Full Text Available The community of Cayon-Phillips on the island of San Kitts faces the challenges of food security and environmental stability and local, regional and global socio-economic transformations. The main crops are fruits, vegetables and ground provisions. Livestock also plays an important role in the local economy. The presence of farms maintains the nutrition security for the families of low resources and they contribute to the protection of the rural landscape .For the development of the investigation a census was carried out in the area corresponding to the cooperative of Cayon - Phillips on the island of San Kitts, the frequency was calculated and the methodology of Leyva and Pohlan (2005 was applied to determine the agrodiversity. The results showed that in the area of the cooperative, 337 trees are present occupying an area of 0.27 hectares that provide a covering of 0.29 percent of the productive area. 20 species were inventoried distributed in 14 families, mostly represented by myrtaceae, mimosaceae, fabaceae and bignonaceae. The species were grouped according to their function in the agrosystem.
A Thought Experiment Comparing Austrian and Keynesian Stimulus Packages
Directory of Open Access Journals (Sweden)
Wladimir Kraus
Full Text Available Essentially, there are two competing views of how to overcome an economy-wide recession/depression. The Austrian view understands the free-play of competition as the most potent means to overcome the short-run mismatch between an excessive boom-level of nominal wages/prices and depressed crisis-level volume of aggregate spending. In the Keynesian view, the disastrous mismatch between desired saving and planned investment inherent in capitalist economies requires the government to step in and take up the burden of spending to infuse the lacking demand for products and labor.The thought experiment presented in the paper is designed to provide the reader with a direct comparison of major analytical claims of the two competing approaches to assess the ability of each of the two to affect, positively or negatively, employment, capital accumulation, and the general standard of living/real wages.
UNCERTAINTY IN NEOCLASSICAL AND KEYNESIAN THEORETICAL APPROACHES: A BEHAVIOURAL PERSPECTIVE
Directory of Open Access Journals (Sweden)
Sinziana BALTATESCU
2015-11-01
Full Text Available The ”mainstream” neoclassical assumptions about human economic behavior are currently challenged by both behavioural researches on human behaviour and other theoretical approaches which, in the context of the recent economic and financial crisis find arguments to reinforce their theoretical statements. The neoclassical “perfect rationality” assumption is most criticized and provokes the mainstream theoretical approach to efforts of revisiting the theoretical framework in order to re-state the economic models validity. Uncertainty seems, in this context, to be the concept that allows other theoretical approaches to take into consideration a more realistic individual from the psychological perspective. This paper is trying to present a comparison between the neoclassical and Keynesian approach of the uncertainty, considering the behavioural arguments and challenges addressed to the mainstream theory.
John E. King (ed.), The Elgar Companion to Post Keynesian Economics (Second edition)
Forges Davanzati, Guglielmo
2015-01-01
This book—an extended version of the first Companion (2002, 405)—presents a wide range of studies falling within Post Keynesian economics, for the main purpose of establishing the basic features of this line of thought. With respect to the previous edition, 43 new entries have been added, dealing, in particular, with some important national traditions of Post Keynesian Economics, the role of financial markets and the crises. New entries are motivated both because of the recent historical fact...
Oil shocks in New Keynesian models: Positive and normative implications
Chang, Jian
Chapter 1 investigates optimal monetary policy response towards oil shocks in a New Keynesian model. We find that optimal policy, in general, becomes contractionary in response to an adverse oil shock. However, the optimal policy rule and the inflation-output trade-off depend on the specific structure of the model. The benchmark economy consists of a flexible-price energy sector and a sticky-price manufacturing sector where energy is used as an intermediate input. We show that optimal policy is to stabilize the sticky (core) price level. We then show that after incorporating a less oil-dependent sticky-price service sector, the model exhibits a trade-off in stabilizing prices and output gaps in the different sticky-price sectors. It predicts that central bank should not try to stabilize the core price level, and the economy will experience higher inflation and rising output gaps, even if central banks respond optimally. Chapter 2 addresses the observed volatility and persistence of real exchange rates and the terms of trade. It contributes to the literature with a quantitative study on the U.S. and Canada. A two-country New Keynesian model consisting of traded, non-traded, and oil production sectors is proposed to examine the time series properties of the real exchange rate, the terms of trade and the real oil price. We find that after incorporating several realistic features (namely oil price shocks, sector specific labor, non-traded goods, asymmetric pricing decisions of exporters and asymmetric consumer preferences over tradables), the benchmark model broadly matches the volatilities of the relative prices and some business cycle correlations. The model matches the data more closely after adding real demand shocks, suggesting their importance in explaining the relative price movements between the US and Canada. Chapter 3 explores several sources and transmission channels of international relative price movements. In particular, we elaborate on the role of
Genetic algorithm learning in a New Keynesian macroeconomic setup.
Hommes, Cars; Makarewicz, Tomasz; Massaro, Domenico; Smits, Tom
2017-01-01
In order to understand heterogeneous behavior amongst agents, empirical data from Learning-to-Forecast (LtF) experiments can be used to construct learning models. This paper follows up on Assenza et al. (2013) by using a Genetic Algorithms (GA) model to replicate the results from their LtF experiment. In this GA model, individuals optimize an adaptive, a trend following and an anchor coefficient in a population of general prediction heuristics. We replicate experimental treatments in a New-Keynesian environment with increasing complexity and use Monte Carlo simulations to investigate how well the model explains the experimental data. We find that the evolutionary learning model is able to replicate the three different types of behavior, i.e. convergence to steady state, stable oscillations and dampened oscillations in the treatments using one GA model. Heterogeneous behavior can thus be explained by an adaptive, anchor and trend extrapolating component and the GA model can be used to explain heterogeneous behavior in LtF experiments with different types of complexity.
THE NEW KEYNESIAN THEORY AND ITS ASSOCIATED MODEL
Directory of Open Access Journals (Sweden)
Oana Simona HUDEA
2016-12-01
Full Text Available The basic new Keynesian model rendered in this paper, as well as the analysis of the reaction of economic variables to the occurrence of a structural, monetary policy shock, strengthen the hypothesis exposed at pure theoretical level, namely the active role of Central Banks in economy, the classical dichotomy between the nominal and the real economic factors being abandoned. As reflected by the impulse-response function graphs, the model endogenous variables: output, output gap, labour hours, inflation rate, nominal interest rate and real interest rate, clearly react to the exogenous variables of the same, represented by structural shocks, returning afterwards, more or less quickly, to their initial steady state. In compliance with the literature in the matter, the monetary entity policies, although having a lower impact than the one generated by the technological changes, manifest obvious influences on the model variables, therefore affecting both the decisions of the representative agents, at microeconomic level, and the aggregate economy, as a whole.
On Teacher Career Development: A Conversation with Phillip Schlechty.
Brandt, Ron
1985-01-01
Briefly discusses Phillip Schlechty's view on teacher career development with university cooperation, needs for systematic faculty development, appropriate administrator roles, encouragement of professionalism, the use of differentiated staffing patterns, and appropriate attitudes toward reform. (PGD)
The Post Keynesians and Douglas North about Uncertainty and Institutions: the Missing Link?
Directory of Open Access Journals (Sweden)
Ivan V. Rozmainsky
2016-09-01
Full Text Available The paper compares the Post Keynesian and North’s approaches to an analysis of uncertainty and uncertainty-reducing role of institutions. Author emphasizes that Post Keynesianism was the first school of economic thought that has made uncertainty the starting point of own research program. Many of North’s line of reasoning about uncertainty were mentioned by the Post Keynesians long before his works had been published. It is not fortuitous that in the course of discussion of ergodicity and non-ergodicity North cites Davidson, leader of Post Keynesianism. Both approaches conclude that Neoclassical theory cannot be applicable to the solution of the real world’s problem because it ignores “genuine” (fundamental uncertainty. The paper considers also differences between these two approaches. Whereas North’s theory explains inability of many systems to grow steadily, the Post Keynesians emphasize problems of systems perceived as successful. These problems exist due the fact that institutional evolution decreases effectiveness of uncertainty’s reduction and are revealed in macroeconomic and financial crises.
USA suursaadik : toetame Eestit / Stanley Davis Phillips ; interv. Erkki Bahovski
Phillips, Stanley Davis
2007-01-01
USA suursaadik Eestis Stanley Davis Phillips vastab küsimustele, mis puudutavad USA positsiooni Tõnismäe pronkssõduri suhtes, Eesti saatkonna piiramist Moskvas, USA ja Venemaa suhteid ning koostööd, sõda terrorismiga, USA kava paigutada Tšehhi ja Poolasse raketitõrjebaasid, Eesti presidendi Toomas Hendrik Ilvese visiiti USAsse. Lisa: Stanley Davis Phillips. Ilmunud ka: Postimees : na russkom jazõke 16. mai lk. 5
Wagner’s law versus Keynesian hypothesis: Evidence from pre-WWII Greece
Directory of Open Access Journals (Sweden)
Antonis Antoniou
2013-01-01
Full Text Available With data of over a century, 1833-1938, this paper attempts, for the first time, to analyze the causal relationship between income and government spending in the Greek economy for such a long period; that is, to gain some insight into Wagner and Keynesian Hypotheses. The time period of the analysis represents a period of growth, industrialization and modernization of the economy, conditions which are conducive to Wagner’s Law but also to the Keynesian Hypothesis. The empirical analysis resorts to Autoregressive Distributed Lag (ARDL Cointegration method and tests for the presence of possible structural breaks. The results reveal a positive and statistically significant long run causal effect running from economic performance towards the public size giving support to Wagner’s Law in Greece, whereas for the Keynesian hypothesis some doubts arise for specific time sub-periods.
Guest Foreword by Lord Phillips KG PC
Directory of Open Access Journals (Sweden)
Nicholas A. Phillips
2012-04-01
Full Text Available The Rt Hon The Lord Phillips of Worth Matravers KG PC, President of the Supreme Court of the United Kingdom of Great Britain and Northern Ireland Ambition and excellence. Those two words epitomize Qatar. Under the leadership of his Highness the Emir, this small State has set out to make an impact on the world that belies its size. Ambitious was the plan to have an international broadcasting station. Ambitious was the plan to build from scratch a Museum of Islamic Art. Ambitious was the bid – the successful bid to host the World Cup in 2022. Ambitious is the bid to stage the Olympic Games in 2020. Qatar not merely has ambitions, it realizes its ambitions. And when it does so it is not enough to say that the result is ‘world class’, for Qatar sets out to be a world leader in whatever it puts its hand to. Excellence is the norm. Al Jazeera has established itself as the broadcasting station of choice for many throughout the world. The Doha Museum of Islamic Art is recognized as being second to none. In addition, the scale and standard of development in Doha itself is setting new standards of excellence in the fields of architecture and civil engineering. Thus when Qatar focuses its energies on education and the law, high achievements are expected. I shall have the honour of helping to achieve those expectations when I succeed Lord Woolf as President of Qatar’s new and impressive Civil and Commercial Court. The College of Law at Qatar University is already achieving excellence in the field of legal education. So, naturally, all expect great things of this new International Review of Law and I am delighted to have been invited to welcome it by this foreword. The range of the first edition is both international and topical. Those countries that have experienced the turbulence of the Arab Spring are settling new constitutions, and other countries are bent on constitutional reform designed to avoid such turbulence. So an erudite article on
International Monetary Policy Coordination in a New Keynesian Model with NICE Features
Poutineau, Jean-Christophe; Vermandel, Gauthier
2018-01-01
The authors provide a static two-country new Keynesian model to teach two related questions in international macroeconomics: the international transmission of unilateral monetary policy decisions and the gains coming from the coordination monetary rules. They concentrate on "normal times" and use a thoroughly graphical approach to…
Wagner’s Law versus Keynesian Hypothesis in Malaysia: An Impressionistic View
Tuck Cheong Tang
2009-01-01
This article refreshes the inter-relationships between government spending and economic growth in Malaysia. The contribution of this article provides a better understanding of the application of Keynesian and Wagnerian hypotheses in the following aspects – (1) literature review; (2) conceptual review on government expenditure-economic growth nexus; and (3) empirical results.
Tom, C. F. Joseph
Money, banking, and macroeconomic textbooks traditionally present the topics of money, the creation of demand deposits by depository institutions, and the Hicksian-Keynesian Theory of Income and Interest separately, as if they were unrelated. This paper presents an integrated approach to those subjects using computer programs written in BASIC, the…
Introduction to the Symposium on Post-Keynesian and Feminist Economics
I.P. van Staveren (Irene); C. Danby (Colin)
2010-01-01
textabstractThe papers in this symposium treat feminist economics as a source of foundational insight and critique. They extend a dialogue between the feminist and post-Keynesian literatures on questions of theory, method, epistemology and ontology. Dialogues across literatures raise questions of
Heterogeneity in Wage Setting Behavior in a New-Keynesian Model
Eijffinger, S.C.W.; Grajales Olarte, A.; Uras, R.B.
2015-01-01
In this paper we estimate a New-Keynesian DSGE model with heterogeneity in price and wage setting behavior. In a recent study, Coibion and Gorodnichenko (2011) develop a DSGE model, in which firms follow four different types of price setting schemes: sticky prices, sticky information, rule of thumb,
On the dissipative Lax-Phillips scattering theory
International Nuclear Information System (INIS)
Neidhardt, H.
1987-01-01
The paper is devoted to the characterization of all possible scattering matrices occurring in a dissipative Lax-Phillips scattering theory. The characterization is obtained in terms of an analytically unitary synthesis of a strongly measurable contraction-valued function which generalizes the notion of Darlingtom synthesis
Lööme kaasa! / Stanley Davis Phillips
Phillips, Stanley Davis
2008-01-01
USA Eesti-suursaadik Stanley Davis Phillips ütleb, et nad on saatkonnas moodustanud meeskonna, mis koosneb ameeriklastest kui ka eestlastest, et liituda üleriigilise ebaseaduslike prügilate likvideerimise üritusega "Teeme ära 2008"
ConocoPhillips Sweeny IGCC/CCS Project
Energy Technology Data Exchange (ETDEWEB)
Paul Talarico; Charles Sugg; Thomas Hren; Lauri Branch; Joseph Garcia; Alan Rezigh; Michelle Pittenger; Kathleen Bower; Jonathan Philley; Michael Culligan; Jeremy Maslen; Michele Woods; Kevin Elm
2010-06-16
Under its Industrial Carbon Capture and Sequestration (ICCS) Program, the United States (U.S.) Department of Energy (DOE) selected ConocoPhillips Company (ConocoPhillips) to receive funding through the American Recovery and Reinvestment Act (ARRA) of 2009 for the proposed Sweeny Integrated Gasification Combined Cycle (IGCC)/Carbon Capture and Storage (CCS) Project (Project) to be located in Brazoria County, Texas. Under the program, the DOE is partnering with industry to demonstrate the commercial viability and operational readiness of technologies that would capture carbon dioxide (CO{sub 2}) emissions from industrial sources and either sequester those emissions, or beneficially reuse them. The primary objective of the proposed Project was to demonstrate the efficacy of advanced technologies that capture CO{sub 2} from a large industrial source and store the CO{sub 2} in underground formations, while achieving a successful business venture for the entity (entities) involved. The Project would capture 85% of the CO{sub 2} produced from a petroleum coke (petcoke) fed, 703 MWnet (1,000 MWgross) IGCC power plant, using the ConocoPhillips (COP) proprietary and commercially proven E-Gas{trademark} gasification technology, at the existing 247,000 barrel per day COP Sweeny Refinery. In addition, a number of other commercially available technologies would be integrated into a conventional IGCC Plant in a unique, efficient, and reliable design that would capture CO{sub 2}. The primary destination for the CO{sub 2} would be a depleted natural gas field suitable for CO{sub 2} storage ('Storage Facility'). COP would also develop commercial options to sell a portion of the IGCC Plant's CO{sub 2} output to the growing Gulf Coast enhanced oil recovery (EOR) market. The IGCC Plant would produce electric power for sale in the Electric Reliability Council of Texas Houston Zone. The existing refinery effluent water would be treated and reused to fulfill all process
Assessing the Impacts of Non-Ricardian Households in an Estimated New Keynesian DSGE Model
Ricardo Marto
2014-01-01
Using Bayesian maximum likelihood and data for Portugal, I estimate a New Keynesian DSGE model allowing for the presence of non-Ricardian households and test the stability of the model's prediction when the fraction of liquidity-constrained households changes. In particular, I assess the impacts on: (i) the model parameters posterior distributions; (ii) the impulse responses to six types of structural shocks; and (iii) the sources of fluctuations in output, inflation and the nominal interest ...
"A Simplified 'Benchmark” Stock-flow Consistent (SFC) Post-Keynesian Growth Model"
Claudio H. Dos Santos; Gennaro Zezza
2007-01-01
Despite being arguably one of the most active areas of research in heterodox macroeconomics, the study of the dynamic properties of stock-flow consistent (SFC) growth models of financially sophisticated economies is still in its early stages. This paper attempts to offer a contribution to this line of research by presenting a simplified Post-Keynesian SFC growth model with well-defined dynamic properties, and using it to shed light on the merits and limitations of the current heterodox SFC li...
The equity price channel in a New-Keynesian DSGE model with financial frictions and banking
Hylton Hollander; Guangling Liu
2013-01-01
This paper studies the role of the equity price channel in business cycle fluctuations, and highlights the equity price channel as a different aspect to general equilibrium models with financial frictions and, as a result, emphasizes the systemic influence of financial markets on the real economy. We develop a canonical New-Keynesian DSGE model with a tractable role for the equity market in banking, entrepreneur and household economic activities. The model is estimated with Bayesian technique...
The role of the generalized Phillips' spectrum in wave turbulence
International Nuclear Information System (INIS)
Newell, A.C.; Zakharov, V.E.
2008-01-01
We suggest the generalized Phillips' spectrum, which we define as that spectrum for which the statistical properties of wave turbulence inherit the symmetries of the original governing equations, is, in many circumstances, the spectrum which obtains in those regions of wavenumber space in which the Kolmogorov-Zakharov (KZ) spectra are no longer valid. This spectrum has many very special properties. We discuss its connection with the singularities which are associated with the whitecap events observed in windblown seas
Forze di mercato, azione sindacale e la curva di Phillips in Italia.
Directory of Open Access Journals (Sweden)
F. MODIGLIANI
2014-09-01
Full Text Available This study is an extension of two previous studies in which the authors build upon their model of trade union action on contract renewals. To this end, a distinction is made between the percentage of workers at any given moment of time whose new contracts take effect on or before the expiration date of their previous contract. The model is subjected to economic tests with data referring to the Italian industrial sector. The central conclusion is that, since with the wave of strikes initiated by the contract renewals of Fall 1969, the Phillips curve has shifted to the right and upwards and its slope for any given level of unemployment is nearly doubled with respect to the slope prevailing in the previous twenty years. Some implications concerning the present conditions of dynamic instability of the inflationary process are then highlighted.JEL: E24, E31, J51
On Scott-Phillips' General Account of Communication.
Planer, Ronald J
2017-12-01
The purpose of this paper is to critically engage with a recent attempt by Thom Scott-Phillips to offer a general account of communication. As a general account, it is intended to apply equally well to both non-human and human interactions which are prima facie communicative in character. However, so far, Scott-Phillips has provided little detail regarding how his account is supposed to apply to the latter set of cases. After presenting what I take to be the most plausible way of filling in those details, I argue that his account would appear to be too narrow: it (minimally) fails to capture a range of human interactions which strike us as instances of communication. To wit, these are cases in which some but not all of the information an act is designed to convey to a reactor actually reaches that reactor. An alternative account incorporating Scott-Phillips' main insights is then sketched, and it is suggested that this account, or something like it, would accommodate the full range of non-human and human interactions that are intuitively communicative.
Radionuclides in sediments from Port Phillip Bay, Australia
International Nuclear Information System (INIS)
Smith, J.D.; Tinker, R.A.; Towler, P.H.
1998-01-01
Full text: Sediment cores were collected from two sites in Port Phillip Bay, Australia, in 1994 and 1995. The concentration of 210 Pb and parameters including water content were measured. The sites chosen were near the centre of the bay where fine sediment accumulates, and towards the northern end of the bay closer to the mouth of the Yarra River. The mid-bay sediment had a high water content (about 1.8 g water per g dry sediment) and a supported 210 Pb activity of about 22 mBq per g of dry sediment. The sediments from further north in the bay were more consolidated, with a lower water content (about 0.6 g water per g dry sediment), and had a supported 210 Pb activity of about 6 mBq per g of dry sediment. Unsupported 210 Pb occurred to depths of about 10 cm in the mid-bay sediment and about 20 cm in sediment from further north in the bay. Models incorporating the water and 210 Pb contents of the sediments were used to calculate possible rates of sediment accumulation and mixing. The distribution of other radionuclides was used as an aid in understanding the sediment behaviour in Port Phillip Bay
Directory of Open Access Journals (Sweden)
Engin Oner
2015-06-01
Full Text Available Adam Smith being its founder, in the Classical School, which gives prominence to supply and adopts an approach of unbiased finance, the economy is always in a state of full employment equilibrium. In this system of thought, the main philosophy of which is budget balance, that asserts that there is flexibility between prices and wages and regards public debt as an extraordinary instrument, the interference of the state with the economic and social life is frowned upon. In line with the views of the classical thought, the classical fiscal policy is based on three basic assumptions. These are the "Consumer State Assumption", the assumption accepting that "Public Expenditures are Always Ineffectual" and the assumption concerning the "Impartiality of the Taxes and Expenditure Policies Implemented by the State". On the other hand, the Keynesian School founded by John Maynard Keynes, gives prominence to demand, adopts the approach of functional finance, and asserts that cases of underemployment equilibrium and over-employment equilibrium exist in the economy as well as the full employment equilibrium, that problems cannot be solved through the invisible hand, that prices and wages are strict, the interference of the state is essential and at this point fiscal policies have to be utilized effectively.Keynesian fiscal policy depends on three primary assumptions. These are the assumption of "Filter State", the assumption that "public expenditures are sometimes effective and sometimes ineffective or neutral" and the assumption that "the tax, debt and expenditure policies of the state can never be impartial".
Inflation and unemployment in South Africa: Is the Phillips curve still ...
African Journals Online (AJOL)
The article addresses a significant shortcoming in the existing South African literature by directly testing the relationship between inflation and the unemployment rate, instead of relying on traditional approximations of this relationship through variables such as the output gap or economic growth which might have ...
Inflation and unemployment in South Africa: Is the Phillips curve still ...
African Journals Online (AJOL)
kirstam
this relationship through variables such as the output gap or economic ... 11.5% outlier in 2008 (Statistics South Africa [StatsSA] n.d). .... In the public debate the SARB has been accused of “applying the ..... Contemporary analyses generally ..... 1A possible drawback of the EG approach is that only bivariate relationships can ...
"To Teach and To Sell": Irna Phillips and Her Sponsors, 1930-1954.
Seiter, Ellen
1989-01-01
Examines the relationships between Irna Phillips, the most powerful woman in soap opera production from the 1930s through the 1960s, and the sponsors of her radio soap operas. Explores how Phillips represented women both in her scripts and in her public relations efforts. (MM)
78 FR 6321 - Stephen Phillips, Brentwood Dam Ventures, LLC; Notice of Transfer of Exemption
2013-01-30
... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 4254-009] Stephen Phillips, Brentwood Dam Ventures, LLC; Notice of Transfer of Exemption 1. By letter filed May 31, 2006 and supplemented on January 15, 2013, Stephen Phillips and Brentwood Dam Ventures, LLC informed the Commission that...
A Stokes drift approximation based on the Phillips spectrum
Breivik, Øyvind; Bidlot, Jean-Raymond; Janssen, Peter A. E. M.
2016-04-01
A new approximation to the Stokes drift velocity profile based on the exact solution for the Phillips spectrum is explored. The profile is compared with the monochromatic profile and the recently proposed exponential integral profile. ERA-Interim spectra and spectra from a wave buoy in the central North Sea are used to investigate the behavior of the profile. It is found that the new profile has a much stronger gradient near the surface and lower normalized deviation from the profile computed from the spectra. Based on estimates from two open-ocean locations, an average value has been estimated for a key parameter of the profile. Given this parameter, the profile can be computed from the same two parameters as the monochromatic profile, namely the transport and the surface Stokes drift velocity.
2010-07-01
... Gas Tanker Transits and Operations at Phillips Petroleum LNG Pier, Cook Inlet, AK. 165.1709 Section...: Liquefied Natural Gas Tanker Transits and Operations at Phillips Petroleum LNG Pier, Cook Inlet, AK. (a... and outbound transits through Cook Inlet, Alaska between the Phillips Petroleum LNG Pier, 60°40′43″ N...
Post-Keynesian alternative policies to curb macroeconomic imbalances in the Euro area
Directory of Open Access Journals (Sweden)
Hein Eckhard
2015-01-01
Full Text Available In this paper we outline alternative post-Keynesian policy recommendations addressing the problems of differential inflation, divergence in competitiveness and associated current account imbalances within the Euro area. We provide a basic framework in order to systematically address the related issues making use of Anthony P. Thirlwall’s (1979, 2002 model of a “balance-of-payments-constrained growth rate” (BPCGR. Based on this framework, we outline the required stance for alternative economic policies and then we discuss the implications for alternative monetary, wage/incomes and fiscal policies in the Euro area as a whole, as well as the consequences for structural and regional policies in the Euro area periphery, in particular.
Coexistence of equilibria in a New Keynesian model with heterogeneous beliefs
International Nuclear Information System (INIS)
Agliari, Anna; Pecora, Nicolò; Spelta, Alessandro
2015-01-01
The recent macroeconomic literature has been stressing the importance of considering heterogeneous expectations while addressing monetary policy. In this paper we consider a standard New Keynesian model, described by a two-dimensional nonlinear map, to analyze the bifurcation structure when agents have heterogeneous expectations and update their beliefs based on past performance. Depending on the degree of reactivity of the monetary policy to inflation and output deviations from the target equilibrium, different kind of dynamics may occur. We find that multiple equilibria and complicated dynamics, associated to codimension-2 bifurcations, may arise even if the monetary policy is set to respond more than point for point to inflation, as the Taylor principle prescribes. We show that if the monetary policy accommodates for a sufficient degree of output stabilization, complicated dynamics can be avoided and the number of coexisting equilibria reduces.
Instability and Nonlinearity in the Euro-area Philips Curve
A. Musso; A. Stracca; D.J.C. van Dijk (Dick)
2009-01-01
textabstractThis paper provides a comprehensive analysis of the functional form of the euro-area Phillips curve over the past three decades. In particular, compared with previous literature, we analyze the stability of the relationship in detail, especially as regards the possibility of a
Una discusión sobre la curva de Phillips de Friedman y la tasa natural de desempleo
Directory of Open Access Journals (Sweden)
Leonardo Raffo López
2007-12-01
Full Text Available In this paper I evaluate the theoretical consistency of Friedman’s Phillips curve.For this, I review his own exposition in the subject, making emphasis in his contributionsto the short-run analysis of unemployment, wages and prices in front of the classicaltheory and Keynes’s “General Theory”. I examine his hypothesis founded in the naturalrate of unemployment, looking at the use of concepts like involuntary unemployment,macroeconomic equilibrium and imperfect information, and also at the mechanism ofexpectation’s formation for workers and entrepreneurships. My conclusion is that hismodel is incomplete and imperfect, and that his hypothesis tumbles down if the naturalrate of unemployment is endogenous and changes with the exogenous chocks in aggregatedemand.
Professor Glyn O. Phillip's legacy within the IAEA programme on radiation and tissue banking.
Morales Pedraza, Jorge
2017-08-19
Professor Phillips began his involvement in the implementation of this important IAEA programme, insisting that there were advantages to be gained by using the ionizing radiation technique to sterilize human and animal tissues, based on the IAEA experience gained in the sterilization of medical products. The outcome of the implementation of the IAEA programme on radiation and tissue banking demonstrated that Professor Phillips was right in his opinion.
Dissipative Lax-Phillips scattering theory and the characteristic function of a contraction
International Nuclear Information System (INIS)
Neidhardt, H.
1987-01-01
The paper deals with the problem to characterize all those contractions admitting a dissipative Lax-Phillips scattering theory. The characterization is given in terms of the characteristic function of contraction and its unitary part. Moreover, the problem is considered and solved to describe all those completely contractions which can be orthogonally enlarged by a unitary operator such that the sum admits an orthogonal dissipative Lax-Phillips scattering theory
Perché la teoria post-keynesiana non è dominante. (Why the post-keynesian theory is not dominant
Directory of Open Access Journals (Sweden)
Angelo Reati
2010-12-01
Full Text Available The first part of this review of the Pasinetti’s (2010 book on the Keynesian school summarizes the reasons why the Kyenesian theory was an “unaccomplished scientific revolution”. As explained by Pasinetti, Keynes neglected some essential building blocks of his theoretical construction, and the Cambridge Keynesians did not fill the gap completely. This prevented the classical/Keynesian paradigm to prevail with respect to its Marginalist-Neoclassical rival. The present theoretical impasse – Pasinetti argues – can be overcome by the adoption of the methodological device of the “separation principle” by distinguishing the phase of “pure theory”, to be elaborated at a logical stage that precedes institutions, from the (applied institutional analysis. In the second part of the paper I show that, while Pasinetti’s suggestion is fully valid, the theoretical strength of a paradigm is a necessary but not sufficient condition for becoming dominant. As the last decades show, the success or failure of a paradigm is also crucially dependent on social and power relations in society. JEL: B50; B31; E12
Keynesianism vs. Classical Economic Theory: European Refugee Crisis and the Fall of Multiculturalism
Directory of Open Access Journals (Sweden)
Aliaksei Igor Patonia
2017-09-01
Full Text Available Posing arguments against statistical evidence picturing the European Union as the key world economy, the research views the economic model of the EU through the prism of Hofstede’s cultural dimensions, explaining its lower resistance towards the global economic crisis and comparing it to China – a country with authoritarian governmental methods – that suffered to a significantly lesser extent. Based on the example of these two entities, the paper views the topic of the current refugee crisis in Europe representing it as a new crucial trial for the EU that potentially checks classical economic theory for consistency. According to the author, if found effective, in the foreseeable future it will form a sound basis for further development, if not – it will likely be replaced by the Keynesian paradigm. Thus, with the current refugee crisis in Europe, the author juxtaposes liberal economy with the state-regulated one. This is done to give hints at the importance of the crisis per se, as it is believed to be capable of shattering some of the fundamental principles of the current world order.
Downshifting in the Fast Lane: A Post-Keynesian Model of a Consumer-Led Transition
Directory of Open Access Journals (Sweden)
Eric Kemp-Benedict
2018-01-01
Full Text Available If the world’s countries seriously tackle the climate targets agreed upon in Paris, their citizens are likely to experience substantial changes in production, consumption, and employment. We present a long-run post-Keynesian model for studying the potential implications of a major transition on macroeconomic stability and employment. It is a demand-led model in which firms have considerable but not absolute freedom to administer prices, while household consumption exhibits inertia. Firms continually seek input-saving technological improvements that, in aggregate, tie technological progress to firms’ cost structures. Together with firm pricing strategies and wage setting, the productivities of different inputs determine the functional income distribution. Saving and investment, and production and purchase of consumption goods, are undertaken by different economic actors, driven by income and capacity utilization, with the possibility that productive capacity exceeds, or falls short of, effective demand. The model produces business cycles and long waves driven by technological change. We present results for a “downshifting” scenario in which households voluntarily withdraw labor, and discuss the implications of downshifting for stability, growth, and employment. We contrast the downshifting scenario with ones in which households reduce consumption without withdrawing from the labor pool.
The effects of oil price shocks in a new-Keynesian framework with capital accumulation
International Nuclear Information System (INIS)
Acurio Vásconez, Verónica; Giraud, Gaël; Mc Isaac, Florent; Pham, Ngoc-Sang
2015-01-01
The economic implications of oil price shocks have been extensively studied since the 1970s. Despite this huge literature, no dynamic stochastic general equilibrium model was available that captures two well-known stylized facts: (1) the stagflationary impact of an oil price shock, together with (2) the influence of the energy efficiency of capital on the depth and length of this impact. We build, estimate and simulate a New-Keynesian model with capital accumulation, which takes the case of an economy where oil is imported from abroad, and where these stylized facts can be accounted for. Moreover, the Bayesian estimation of the model on the US economy (1984–2007) suggests that the output elasticity of oil might have been above 10%, stressing the role of oil use in US growth at this time. Finally, our simulations confirm that an increase in energy efficiency significantly attenuates the effects of an oil shock—a possible explanation of why the third oil shock (1999–2008) did not have the same macro-economic impact as the first two ones. These results suggest that oil consumption and energy efficiency have been two major engines for US growth in the last three decades.
Functional distribution of income and economic activity in Croatia: Post-Keynesian approach
Directory of Open Access Journals (Sweden)
Boris Vujčić
2014-06-01
Full Text Available The aim of this paper is to quantify the effects of changes in functional income distribution on selected macroeconomic variables in Croatia in period from 2000-2012. We use structural VAR approach with identification scheme based on a priori restrictions that are derived from theoretical framework of Post-Keynesian macroeconomic model. Our main hypothesis, which is confirmed in the empirical analysis, is that the accumulation of capital in Croatia was primarily determined by income from labor, i.e. that Croatia had wage-led accumulation. We also found that labor market dynamics was dominantly influenced by demand side shocks and that positive effects of the rise in exports, resulting from the gain in competitiveness (after reducing wage share in income outweigh negative effects of weaker demand on the capacity utilization. So in our opinion export share increase should become policy priority, as domestic demand is currently constrained by high private and public debt levels. To the extent that increase in exports might require decline in the relative share of labor, negative impact on the investments in non-tradable sector would need to be offset with higher investments in tradable sector of Croatian economy.
Welfare Implications of Alternative Monetary Policy Rules: A New Keynesian DSGE Model for Turkey
Directory of Open Access Journals (Sweden)
Yağcıbaşı Özge Filiz
2017-12-01
Full Text Available In recent years, there has been extensive research on the conduct of monetary policy in small open economies that are subject to inflation and output fluctuations. Policymakers should decide whether to implement strict inflation targeting or to respond to the changes in output fluctuations while conducting monetary policy rule. This study aims to examine the response of alternative monetary policy rules to Turkish economy by means of a DSGE model that is subject to demand and technology shocks. The New Keynesian model we used is borrowed from Gali (2015 and calibrated for the Turkish economy. Welfare effects of alternative Taylor rules are evaluated under different specifications of central bank loss function. One of the main findings of this paper is that in the case of a technology shock, strict inflation targeting rules provide the minimum welfare loss under all loss function configurations. On the contrary, the losses are weakened if the monetary authority responds to output fluctuations in the presence of a demand shock. Finally, there exists a trade-off between the volatility of output and inflation in case of a technology shock, while the volatility of both variables moves in the same direction in response to a demand shock.
Growth, exchange rates and trade in Brazil: a structuralist post Keynesian approach
Directory of Open Access Journals (Sweden)
Nelson H. Barbosa Filho
2009-06-01
Full Text Available This paper presents a structuralist post-Keynesian analysis of trade adjustment in Brazil. Based on the concept of the balance-of-payments (BoP constraint on growth, the paper investigates the relationship between income growth and real-exchange-rate devaluation necessary to adjust trade to a foreign-exchange constraint. The main result is that, with price-inelastic and income-elastic imports and based on its trade structure in 2002, Brazil may have to compensate an additional 1% of income growth with approximately 7% of real-exchange-rate devaluation in order to keep its trade balance stable in relation to GDP in the near future. Moreover, the trade parameters of Brazil seem to be unfavorable to growth with stable trade, that is, even moderate rates of GDP expansion lead to a substantial increase of imports and, therefore, require an also substantial devaluation of the real exchange rate to avoid a deterioration of the trade balance.
Growth, exchange rates and trade in Brazil: a structuralist post-Keynesian approach
Directory of Open Access Journals (Sweden)
Nelson H. Barbosa Filho
2004-01-01
Full Text Available This paper presents a structuralist post-Keynesian analysis of trade adjustment in Brazil. Based on the concept of the balance-of-payments (BoP constraint on growth, the paper investigates the relationship between income growth and real-exchange-rate devaluation necessary to adjust trade to a foreign-exchange constraint. The main result is that, with price-inelastic and income-elastic imports and based on its trade structure in 2002, Brazil may have to compensate an additional 1% of income growth with approximately 7% of real-exchange-rate devaluation in order to keep its trade balance stable in relation to GDP in the near future. Moreover, the trade parameters of Brazil seem to be unfavorable to growth with stable trade, that is, even moderate rates of GDP expansion lead to a substantial increase of imports and, therefore, require an also substantial devaluation of the real exchange rate to avoid a deterioration of the trade balance.
A multi-sectoral version of the Post-Keynesian growth model
Directory of Open Access Journals (Sweden)
Ricardo Azevedo Araujo
2015-03-01
Full Text Available Abstract With this inquiry, we seek to develop a disaggregated version of the post-Keynesian approach to economic growth, by showing that indeed it can be treated as a particular case of the Pasinettian model of structural change and economic expansion. By relying upon vertical integration it becomes possible to carry out the analysis initiated by Kaldor (1956 and Robinson (1956, 1962, and followed by Dutt (1984, Rowthorn (1982 and later Bhaduri and Marglin (1990 in a multi-sectoral model in which demand and productivity increase at different paces in each sector. By adopting this approach it is possible to show that the structural economic dynamics is conditioned not only to patterns of evolving demand and diffusion of technological progress but also to the distributive features of the economy, which can give rise to different regimes of economic growth. Besides, we find it possible to determine the natural rate of profit that makes the mark-up rate to be constant over time.
Directory of Open Access Journals (Sweden)
Oreiro José Luis
2015-01-01
Full Text Available The aim of this paper is to show at theoretical level that maintaining a competitive real exchange rate positively affects the economic growth of developing countries by means of a Keynesian-Structuralist model that combines elements of Kaleckian growth models with the balance of payments constrained growth models pioneered developed by Thirlwall. In this setting, the level of real exchange rate is capable, due to its effect over capital accumulation, to induce a structural change in the economy, making endogenous income elasticities of exports and imports. For reasonable parameter values it is shown that in steady-state growth there is two long-run equilibrium values for real exchange rate, one that corresponds to an under-valued currency and another that corresponds to an over-valued currency. If monetary authorities run exchange rate policy in order to target a competitive level for real exchange rate, than under-valued equilibrium is stable and the economy will show a high growth rate in the long-run.
The Phillips Laboratory capillary pumped loop test facility
Gluck, Donald F.; Kaylor, Marc C.
1996-03-01
An ammonia capillary pumped loop (CPL) test facility has been designed, fabricated, subject to acceptance tests, and assembled at Phillips Laboratory. Its intent is to support a wide range of Air Force programs, bringing CPL technology to flight readiness for operational systems. The facility provides a high degree of modularity and flexibility with several heating and cooling options, and capability for elevation (+/- 15 in.), tilt (+/-60°) and transport length variation. It has a 182 by 44 by 84 inch envelope, an expected heat load capability of 2500 W, and a temperature range of 0 to 50 °C. The evaporator section has two plates with four capillary pumps (CPs) each, with a starter pump on one plate. The CPs are 5/8 in., with TAG aluminum 6063-T6 casing and UHMW polyethylene wicks. The active lengths are 15 and 30 inch with both 10 and 15 micron wicks. The individual CPs have thermal and hydraulic isolation capability, and are removable. The transport section consists of stainless steel lines in a serpentine configuration, a 216 in3 free volume reservoir, and a mechanical pump. The vapor transport line contains a capillary device (which can be bypassed) for vapor blockage during startup. The condenser consists of two separately valved, parallel cold plates each with a downstream noncondensible gas trap. Cooling of up to 1500 W at -50 °C is provided by an FTS Systems chiller using Flourinert FC-72. An enclosure/exhaust system is provided for safety and emergency venting of ammonia. An ammonia charge station performs or supports the functions of proof pressure, flushing with ammonia, purging with gaseous nitrogen, evacuation of all or part of the CPL to 20 microns, and charging. Instrumentation consists of over 116 thermocouples, five of which are internal; one absolute and six differential pressure transducers; eleven watt transducers, and a reservoir load cell. The data acquisition system consists of a temperature scanner, Bernoulli drive, and two Macintosh
Lax-Phillips scattering theory with two Hilbert spaces V(x)=0((1)/|x|β), β>1
International Nuclear Information System (INIS)
Brambila Paz, F.
1988-10-01
A scattering theory for the wave equation with a perturbation with compact support was developed by Lax and Phillips in 1967. Using Enss approach Phillips developed a Lax-Phillips scattering theory for perturbations V such that V(x)=0((1)/|x| β ), β>2. In this paper we develop a scattering theory for more general perturbations V, i.e. for V(x)=0((1)/|x| β ), β>1. (author). 8 refs
Fundamental rocket injector/spray programs at the Phillips Laboratory
Talley, D. G.
1993-11-01
injectors, but can be a consideration in preburners, where the desire to keep turbine inlet temperatures as cool as possible can make it advantageous for the preburners to operate as far from stoichiometry as can be tolerated. ignitable during startup where pressures and temperatures are far from design conditions, and ignition transients must be minimized in order to avoid damage to engine components. In order to satisfy these various constraints, the injector designer must be able to perform design tradeoff studies, and it is important that this be done with minimal time and costs. In fact, it can easily be argued that reducing engine development time and costs is essential to maintaining U.S. competitiveness in space. *The Propulsion Directorate of the Phillips Laboratory has invested in a number of programs to advance liquid rocket engine technology, and several of these are directed at improving design tools for liquid rocket injectors. -The purpose of the presentation will be to describe some of these latter programs.
Cosmopolitanism and Subversion of 'Home' in Caryl Phillips's A Distant Shore
Directory of Open Access Journals (Sweden)
Alan McCluskey
2013-11-01
Full Text Available The novels of Caryl Phillips have most commonly been approached from post-colonial theoretical perspectives, a trend which appears entirely appropriate given their recurrent themes of immigration, ethnic discrimination and the legacy of the trans-Atlantic slave trade. However, the analysis below contends that the publication of A Distant Shore marked a change of direction in Phillips's oeuvre towards a less formally experimental but thematically more cosmopolitan form of writing that conspicuously sets out to subvert and redefine the idea of 'home'. Using the critical frameworks of Avtar Brah, Paul Gilroy and Jacques Derrida, the discussion will illustrate how Phillips critically re-imagines the notion 'home' in order to signify an inclusive space of cosmopolitan conviviality and openness.
Directory of Open Access Journals (Sweden)
TIAGO SANTOS TELLES
2016-03-01
Full Text Available ABSTRACT The present study aims to evaluate crop, pasture and forest land prices in Brazil, between 1994 and 2010, in the light of Post-Keynesian theory. The results provide evidence that land, more than just a simple factor of production, must be conceived of as an economic asset. In fact, the price of rural land is determined not only by the expected profitability deriving from agricultural activities but also by the agents' expectations about its future appreciation and liquidity in an economic environment permeated with uncertainty. In this context, as an object of speculation, land has been particularly important as a store of value.
Temporal Dynamics and Decomposition of Reciprocal Determinism: A Reply to Phillips and Orton.
Bandura, Albert
1983-01-01
In their analysis of reciprocal determinism, Phillips and Orton (TM 509 061) mistakenly assume that behavior, cognitive and other personal factors, and environmental events operate as a simultaneous wholistic interaction. Contrary to this belief, the interactants in triadic reciprocality work their mutual effects sequentially over variable time…
108 | P a g e PHILLIPS v EYRE AND ITS APPLICATION TO MULTI ...
African Journals Online (AJOL)
Fr. Ikenga
Beevers, The Conflict of Laws, 7th ed., (London, Sweet & Maxwell, 2009), p.394. ... This will enable us appreciate better, the purport of the rule in Phillips v Eyre. 3. .... both officers of Nigerian Army, they work and live in Nigeria and are only in ...
In situ, Cr K-edge XAS study on the Phillips catalyst : activation and ethylene polymerization
Groppo, E.; Prestipino, C.; Cesano, F.; Bonino, F.; Bordiga, S.; Lamberti, C.; Thuene, P.C.; Niemantsverdriet, J.W.; Zecchina, A.
2005-01-01
In this in situ EXAFS and XANES study on the Phillips ethylene-polymerization Cr/SiO2 catalyst, two polymerization routes are investigated and compared. The first mimics that adopted in industrial plants, where ethylene is dosed directly on the oxidized catalyst, while in the second the oxidized
Inflation Dynamics and Real Marginal Costs
DEFF Research Database (Denmark)
Petrella, Ivan; Santoro, Emiliano
2012-01-01
This paper deals with the analysis of price-setting in U.S. manufacturing industries. Recent studies have heavily criticized the ability of the New Keynesian Phillips curve (NKPC) to fit aggregate inflation (see, e.g., Rudd and Whelan, 2006). We challenge this evidence, showing that forward...
Post-Keynesyen Talep Yönelimli Büyüme Modelleri(Post-Keynesian Demand Oriented Growth Models
Directory of Open Access Journals (Sweden)
Yelda Bugay TEKGÜL
2013-12-01
Full Text Available Economic literature generally contains growth models dominated by classical/neo-classical approach. These models focused on the differences in the growth rates among countries in terms of supply of factors of production. Wheras capital accumulation and technical progress are viewed as the main determinant of the growth, increase in per-capita income is only determined by supply-side factors. Should the economy is in the position of under-employment and under-capacity, then these approaches are not capable of satisfactory explanation for the economic growth. Assumptions of supply-side approach are endogenous regarding the economic system and restricted by the demand. In an open economy, growth can be defined as a component of a Keynesian demand-oriented economic system and it is genarally called as Post-Keynesian growth models. These models have been developed on two main axes: “Export-led growth model”, introduced by N. Kaldor and “balance-of-payment constrained growth model”introduced by A.P.Thirwall in 1979. Export-led growth model is based on the assumption that internally determined productivity increases generate a virtous circle economy. Balance-of-payment constrained growth model, on the other hand, is based on the assumption that foreign trade deficit cannot continue forever and that long-run growth rate is a function of the export and elasticity of demand for import of the country. The objective of this paper is to discuss and critisize export-led growth and balance-of-payment constrained growth model.
International Nuclear Information System (INIS)
1981-10-01
Ford, Bacon and Davis Utah, Inc., has reevaluated the Phillips/United Nuclear site in order to revise the December 1977 engineering assessment of the problems resulting from the existence of radioactive uranium mill tailings at Ambrosia Lake, New Mexico. This engineering assessment has included the preparation of topographic maps, the performance of core drillings and radiometric measurements sufficient to determine areas and volumes of tailings and radiation exposures of individuals and nearby populations, the investigations of site hydrology and meteorology, and the evaluation and costing of alternative corrective actions. Radon gas released from 2.6 million dry tons of tailings at the Phillips/United Nuclear site constitutes the most significant environmental impact, although windblown tailings and external gamma radiation also are factors. The four alternative actions presented in this engineering assessment range from millsite decontamination with the addition of 3 m of stabilization cover material, to removal of the tailings to remote disposal sites and decontamination of the tailings site. Cost estimates for the four options range from about $21,500,000 for stabilization in-place, to about $45,200,000 for disposal at a distance of about 15 mi. Three principal alternatives for the reprocessing of the Phillips/United Nuclear tailings were examined: heap leaching; treatment at an existing mill; and reprocessing at a new conventional mill constructed for tailings reprocessing.The cost of the uranium recovered would be about $87/lb of U 3 O 8 by either heap leach or conventional plant process. The spot market price for uranium was $25/lb early in 1981. Reprocessing the Phillips/United Nuclear tailings for uranium recovery does not appear to be economically attractive under present or foreseeable market conditions
Sidgwick’s Argument for Utilitarianism and his Moral Epistemology: A Reply to David Phillips
Skelton, Anthony
2014-01-01
David Phillips’s Sidgwickian Ethics is a penetrating contribution to the scholarly and philosophical understanding of Henry Sidgwick’s The Methods of Ethics. This note focuses on Phillips’s understanding of (aspects of) Sidgwick’s argument for utilitarianism and the moral epistemology to which he subscribes. In § I, I briefly outline the basic features of the argument that Sidgwick provides for utilitarianism, noting some disagreements with Phillips along the way. In § II, I raise some object...
ROZMAINSKY I.V.
2016-01-01
The paper develops Post Keynesian theory of endogenous money and applies it to analysis of changes in monetary circulation in the Russian transitional economy in 1991-1998. These changes were characterized by displacement of bank deposits by cash, barter and inter-firm arrears as special means of payment. Author treats this process as «monetary degradation» because it created additional barriers to financing investment, made for criminalization and contributed to cost-push inflation. All this...
Enhancement of the efficiency of the Open Cycle Phillips Optimized Cascade LNG process
International Nuclear Information System (INIS)
Fahmy, M.F.M.; Nabih, H.I.; El-Nigeily, M.
2016-01-01
Highlights: • Expanders replaced JT valves in the Phillips Optimized Cascade liquefaction process. • Improvement in plant liquefaction efficiency was evaluated in presence of expanders. • Comparison of the different optimum cases for the liquefaction process was presented. - Abstract: This study aims to improve the performance of the Open Cycle Phillips Optimized Cascade Process for the production of liquefied natural gas (LNG) through the replacement of Joule–Thomson (JT) valves by expanders. The expander has a higher thermodynamic efficiency than the JT valve. Moreover, the produced shaft power from the expander is integrated into the process. The study is conducted using the Aspen HYSYS-V7 simulation software for simulation of the Open Cycle Phillips Optimized Cascade Process having the JT valves. Simulation of several proposed cases in which expanders are used instead of JT valves at different locations in the process as at the propane cycle, ethylene cycle, methane cycle and the upstream of the heavies removal column is conducted. The optimum cases clearly indicate that expanders not only produce power, but also offer significant improvements in the process performance as shown by the total plant power consumption, LNG production, thermal efficiency, plant specific power and CO_2 emissions reduction. Results also reveal that replacing JT valves by expanders in the methane cycle has a dominating influence on all performance criteria and hence, can be considered as the main key contributor affecting the Phillips Optimized Cascade Process leading to a notable enhancement in its efficiency. This replacement of JT valves by liquid expanders at different locations of the methane cycle encounters power savings in the range of 4.92–5.72%, plant thermal efficiency of 92.64–92.97% and an increase in LNG production of 5.77–7.04%. Moreover, applying liquid expanders at the determined optimum cases for the different cycles, improves process performance and
Wen, Xing-Chun; He, Ling-Yun
2015-08-01
There is a bitter controversy over what drives the housing price in China in the existing literature. In this paper, we investigate the underlying driving force behind housing price fluctuations in China, especially focusing on the role of housing demand shock with that of money supply shock in explaining housing price movements, by a new Keynesian dynamic stochastic general equilibrium model. Empirical results suggest that it is housing demand, instead of money supply, that mainly drives China's housing price movements. Relevant policy implication is further discussed, namely, whether to consider the housing price fluctuations in the conduct of monetary policy. By means of the policy simulations, we find that a real house price-augmented money supply rule is a better monetary policy for China's economy stabilization. 1. Investment refers to fixed capital investment. 2. Housing price refers to national average housing price. Quarterly data on housing price during the period of our work are not directly available. However, monthly data of the value of sales on housing and sale volume on housing can be directly obtained from National Bureau of Statistics of China. We add up the monthly data and calculate one quarter's housing price by dividing the value of housing sales by its sale volume in one quarter. 3. M2 means the broad money supply in China.
Profile of Julie Phillips, MD, MPH: Family physician, medical educator, researcher, poet.
Fogarty, Colleen T; Shapiro, Johanna
2015-12-01
Dr. Julie Phillips, an Associate Professor of Family Medicine at Michigan State University College of Human Medicine, has contributed several poems to Families, Systems, and Health over the last 2 years. This month's issue features her fourth poem in this journal, titled "Autumn Chores" (Phillips, 2015). We were interested in learning more about Julie's creative writing, why she writes poetry, how she balances writing and a demanding academic medical career, and what she hopes her poems might contribute to clinical practice and medical education. Colleen Fogarty interviewed her to find out the answers in this article. Julie's poems are indeed, as she says, carved from small moments in time, but they have a disproportionately large emotional impact. Her poems tackle issues such as the tension between medical and parental authority; professional boundaries; worklife balance; the still-gaping holes in our health care system; and what it means to care for others. To read her work, please search the journal index. (PsycINFO Database Record (c) 2015 APA, all rights reserved).
Rimbaud’s influence on Jayne Anne Phillips: from Sweethearts to Shelter
Directory of Open Access Journals (Sweden)
Stéphanie Durrans
2012-06-01
Full Text Available Arthur Rimbaud emerges from Jayne Anne Phillips���s essays as a continual source of fascination. This paper explores the patterns of convergence that unite these two writers one century apart while aiming to provide a deeper and more meaningful appreciation of Phillips’ accomplishments in Shelter. It focuses on Rimbaud’s and Phillips’ conception of language and their emphasis on "visionary writing", before investigating the significance of such patterns on Shelter and exploring the stylistic affinities linking their respective works. In the end, linguistic deconstruction and regeneration appears as one of the ways in which both writers seek to express the hidden traumas of a society in the grips of violence.A en juger par les quelques essais de Jayne Anne Phillips dans lesquels il est mentionné, Arthur Rimbaud semble avoir exercé une véritable fascination sur la jeune nouvelliste et romancière américaine au moins jusque dans les années 1990. Cet article explore la filiation littéraire entre deux auteurs mus par un même souci de renouveler la langue par l’élaboration d’une « écriture visionnaire », à rebours des cadres normatifs et de toute pensée logique. A ce titre, le roman Shelter (1994 apparaît comme l’hommage le plus appuyé rendu par Phillips au poète français, notamment par le double processus de déconstruction et de régénération linguistique qui permet à son auteur d’exprimer les traumatismes individuels et collectifs d’une société hantée par la violence.
Directory of Open Access Journals (Sweden)
Fernando Ferrari Filho
2008-04-01
Full Text Available O objetivo do presente artigo consiste em apresentar, tendo como referência a análise de Keynes, uma proposição de regime cambial para países emergentes que seja capaz de assegurar condições para a estabilização macroeconômica, entendida como o binômio estabilidade de preços e pleno-emprego.The article presents, in a Keynesian perspective, a proposal of exchange rate regime for emerging countries to assure macroeconomic stabilization, that is, price stability and full employment.
2012-07-30
..., Trainer Refinery, Including On-Site Leased Workers From Shrack, Young, and Associates, Inc., and Project Control Associates, Trainer, PA; Notice of Revised Determination on Reconsideration On April 30, 2012, the... applicable to workers and former workers of ConocoPhillips Company, Trainer Refinery, Trainer, Pennsylvania...
A case of social investment: Uere and Phillips Petroleum do Brasil Projects
Energy Technology Data Exchange (ETDEWEB)
Medeiros, Daniella dos Santos; Fryklund, Robert Eugene [Phillips Petroleum do Brasil Ltda., Rio de Janeiro, RJ (Brazil); Mello, Yvonne Bezerra de [Projeto Uere, Rio de Janeiro, RJ (Brazil)
2004-07-01
CONOCOPHILLIPS views Social Investment as an important element of contributing to social progress and achieving its view of Sustainable Growth. According to CONOCOPHILLIPS a company's ability to grow depends not only on its business successes but also on its reputation as a corporate citizen. This reputation is built largely by responsible civic actions, social investment and environmental stewardship. The company invests in programs that provide sustainable community development, benefit the stakeholders, are aligned with its strategic business objectives, and are consistent with its core values. CONOCOPHILLIPS recognizes that the most effective corporate social investment is achieved by pro actively identifying the key community needs and by entering into strategic partnerships with agencies and organizations that serve good causes. In Rio de Janeiro, Phillips Petroleum do Brasil, a subsidiary of CONOCOPHILLIPS, has been working with Projeto Uere, a non-profit non-governmental organization (NGO) that runs an educational program for children living under social risk in Favela da Mare. Projeto Uere performs preventive work, helping children overcome their learning and social difficulties. The Projeto Uere case study results will highlight the application of some of CONOCOPHILLIPS social investment policies and strategies used to select and evaluate partnership projects in Brazil. (author)
Teaching Post Keynesian Economics
DEFF Research Database (Denmark)
Denne bog har gør gældende, at post keynesiansk økonomi har sit egen metodiske og didaktiske grundlag, og dens realistisk analyse er tiltrængt i den aktuelle økonomiske og finansielle krise. På et tidspunkt hvor det oprindelige indhold i Keynes 'General Theory ikke længere er til stede i de flest...
International Nuclear Information System (INIS)
1981-10-01
Ford, Bacon and Davis Utah, Inc., has reevaluated the Phillips/United Nuclear site in order to revise the December 1977 engineering assessment of the problems resulting from the existence of radioactive uranium mill tailings at Ambrosia Lake, New Mexico. This engineering assessment has included the preparation of topographic maps, the performance of core drillings and radiometric maps, the performance of core drillings and radiometric measurements sufficient to determine areas and volumes of tailings and radiation exposures of individuals and nearby populations, the investigations of site hydrology and meteorology, and the evaluation and costing of alternative corrective actions. Radon gas released from the 2.6 million dry tons of tailings at the Phillips/United Nuclear site constitutes the most significant environmental impact, although windblown tailings and external gamma radiation also are factors. The four alternative actions presented in this engineering assessment range from millsite decontamination with the addition of 3 m of stabilization cover material, to removal of the tailings to remote disposal sites and decontamination of the tailings site. Cost estimates for the four options range from about $21,500,000 for stabilization in-place, to about $45,200,000 for disposal at a distance of about 15 mi. Three principal alternatives for the reprocessing of the Phillips/United Nuclear tailings were examined: heap leaching; treatment at an existing mill; reprocessing at a new conventional mill constructed for tailings reprocessing. The cost of the uranium recovered would be about $87/lb of U 3 O 8 by either heap leach or conventional plant process. The spot market price for uranium was $25/lb early in 1981. Reprocessing the Phillips/United Nuclear tailings for uranium recovery does not appear to be economically attractive under present or foreseeable market conditions
Lagrangian Curves on Spectral Curves of Monopoles
International Nuclear Information System (INIS)
Guilfoyle, Brendan; Khalid, Madeeha; Ramon Mari, Jose J.
2010-01-01
We study Lagrangian points on smooth holomorphic curves in TP 1 equipped with a natural neutral Kaehler structure, and prove that they must form real curves. By virtue of the identification of TP 1 with the space LE 3 of oriented affine lines in Euclidean 3-space, these Lagrangian curves give rise to ruled surfaces in E 3 , which we prove have zero Gauss curvature. Each ruled surface is shown to be the tangent lines to a curve in E 3 , called the edge of regression of the ruled surface. We give an alternative characterization of these curves as the points in E 3 where the number of oriented lines in the complex curve Σ that pass through the point is less than the degree of Σ. We then apply these results to the spectral curves of certain monopoles and construct the ruled surfaces and edges of regression generated by the Lagrangian curves.
Directory of Open Access Journals (Sweden)
Leo Rafolt
2015-12-01
Full Text Available Transcultural and Transcorporal Neighbors: Japanese Performance Utopias in Jerzy Grotowski, Eugenio Barba and Phillip B. Zarrilli This paper is mainly focused on the concept of transcultural bodily knowledge elaborated by Eugenio Barba and Nicola Savarese in their concept of theatre anthropology. Their research on pre-existent and pre-expressive values of the human movement, especially considering Asian theatre and performative practices, will be reexamined in the context of over-imposed interculturalism in Humanities and Social Studies. The focus will be thus put on the modifications of the bodily knowledge in this sense (Yuasa, as well as on the (reappropriations of the Asian philosophical/theoretical embodiment schemes in the Western thought, not only from the standpoint of performative research made by Eugenio Barba and Phillip B. Zarrilli, but also from the standpoint of Shusterman’s pragmatic reinterpretations of Merleau-Ponty’s legacy, Schechner/Turner’s anthropology of human performativity, etc. In this context, the key idea of unique transcultural background of the human kinesis, employed mainly by Barba, will be put in an overall context of contemporary (transcultural utopism. The key element for interpretation will thus be an overall context of Asian martial arts practice, especially the significance of ‘iemoto principle’ (hereditary bodily technique for the establishment of Grotowski’s, Barba’s and Zarrilli’s psychology and physiology of performance tactics. Transkulturowi i transcieleśni sąsiedzi: japońskie utopie performatywne u Jerzego Grotowskiego, Eugenia Barby i Philipa B. Zarrilliego Artykuł skupia się głównie na pojęciu transkulturowej wiedzy cielesności, wypracowanym przez Eugenia Barbę i Nicolę Savaresego w ich ujęciu antropologii widowiska. Ich badania nad uprzednimi i przedekspresywnymi wartościami ruchu ludzkiego, zwłaszcza w kontekście teatru azjatyckiego i praktyk performatywnych
Directory of Open Access Journals (Sweden)
Marco Leonardo Penagos Rozo
2013-01-01
Full Text Available New Keynesians (NK refer to an advanced posture compared to the traditional paradigm of the IS-LM equilibrium, which, as a tool, satisfied economic policy explanations for the moment. The model had critics like be considered not to have microeconomic foundations, among others. Perhaps at the times presented: Keynes, in 1936, with the General Theory, Hicks, in 1937, with Mr. Keynes and the classics; Samuelson in 1948 and subsequent years, with his work Economy, it provided important elements in the balance. However, a new approach was needed for the Twenty-First Century, and it is the one proposed by David Romer. The purpose of this article is to make an initial review for understanding how some aspects of economic policy are linked as elements of economic growth.
Directory of Open Access Journals (Sweden)
Muhammad Ali Nasir
2016-12-01
Full Text Available This study derives an optimal macroeconomic policy combination for financial sector stability in the United Kingdom by employing a New Keynesian Dynamic Stochastic General Equilibrium (NK-DSGE framework. The empirical results obtained show that disciplined fiscal and accommodative monetary policies stance is optimal for financial sector stability. Furthermore, fiscal indiscipline countered by contractionary monetary stance adversely affects financial sector stability. Financial markets, e.g. stocks and Gilts show a short-term asymmetric response to macroeconomic policy interaction and to each other. The asymmetry is a reflection of portfolio adjustment. However in the long-run, the responses to suggested optimal policy combination had homogenous effects and there was evidence of co-movement in the stock and Gilt markets.
Directory of Open Access Journals (Sweden)
Meelis Angerma
2013-09-01
Full Text Available Developments in the real world depends on human reaction to economic events which is also determined by dominating economic thought. Dominance of neoliberal and monetarist thinking was the main cause of ignoring asset price bubbles and their effects on real economy. New keynesian economic thinking provides an alternative. Hyman Minsky’s model of financial instability was more effectively able to explain super-bubbles in US economy and subsequent ‚Great Recession’. Ignorance of momentum-bias of traders and banks contributed to this crises. Emerging markets and Baltic countries were strongly influenced by credit oversupply in US. Instabilities were so sizeable that IMF approved using capital control and proposal for tax on financial transactions was made. Policymakers and individuals should abandon ignorance of speculative asset price bubbles and improve their analytical skills to recognize bubbles and change their behaviour
Are Seagrass effective Sentinels of Ecosystem Health in Port Phillip Bay, Australia?
Lee, R. S.; Cook, P. L. M.; Jenkins, G.; Nayar, S.; Hirst, A.; Keough, M. J.; Smith, T.; Ferguson, A.; Gay, J.; Longmore, A. R.; Macreadie, P.; Sherman, C.; Ross, J.; York, P.
2016-02-01
Seagrasses are an important part of many coastal systems, but are also under threat in many areas, as a result of a wide range of human activities, including habitat loss and changes to water quality. Due to these sensitivities seagrass are often selected as sentinels of change for coastal marine ecosystems, but could these sensitivities be too complex and varied to provide a clear or reliable measure of change? A recent three year study focused on the resilience of Zostera seagrasses in Port Phillip Bay, Southern Australia, where these ecosystem "engineers", have a dramatic influence on biodiversity and ecosystem function. This large temperate embayment experiences extreme climatic variability, significant loading from urbanized catchments and inflows from the largest sewage treatment facility in Australia, making it a challenging case study for assessing seagrass as a suitable ecosystem metric. Studies on the influence of nutrients, light and sediments using modelling, chemical analyses and field experiments assessed characteristics of Zostera habitat within the bay. Nutrients could be obtained directly in dissolved form from the water column, or sediment, or as atmospheric nitrogen fixed by bacteria associated with the root/rhizome system. Isotopic nutrients were traced to a variety of sources including river inflows, sewage discharges, groundwater, the open ocean, the atmosphere and indirectly via phytoplankton and detritus. Broad-scale seagrass coverage is often depth limited by light, however for regions of significant wave exposure deeper beds existed adjacent to less favorable shallows. Ephemeral beds in more exposed regions showed the greatest potential for responding to change. For these beds, resilience was dependent on bed architecture, connectivity to indirect nutrient sources, and genetic interactions with seagrass communities around the bay. While observed changes in seagrass cover may be a symptomatic trigger of ecosystem health, much as high blood
How have inflation dynamics changed over time? Evidence from the euro area and USA
Oinonen, Sami; Paloviita, Maritta; Vilmi , Lauri
2013-01-01
This paper analyzes euro area and U.S. inflation dynamics since the beginning of the 1990s by estimating New Keynesian hybrid Phillips curves with time-varying parameters. We measure inflation expectations by subjective forecasts from Consensus Economics survey and so do not assume rational expectations. Both rolling regressions and state-space models are employed. The results indicate that in both economic areas the inflation dynamics have steadily become more forward-looking over time. We a...
Inflation Volatility and the Inflation-Growth Tradeoff in India
Raghbendra Jha; Varsha S. Kulkarni
2012-01-01
This paper amends the New Keynesian Phillips curve model to include inflation volatility and tests the determinants of such volatility for India. It provides results on the determinants of inflation volatility and expected inflation volatility for OLS and ARDL (1,1) models and for change in inflation volatility and change in expected inflation volatility using ECM models. Output gap affects change in expected inflation volatility along (in the ECM model) and not in the other models. Major det...
Inflation, its Volatility and the Inflation-Growth Tradeoff in India
Raghbendra Jha; Varsha S. Kulkarni
2013-01-01
This paper amends the New Keynesian Phillips curve model to include inflation volatility. It provides results on the determinants of inflation volatility and expected inflation volatility for OLS and ARDL(1,1) models and for change in inflation volatility and change in expected inflation volatility using ECM models. Output gap affects change in expected inflation volatility alone (in the ECM model) and not in the other models. Major determinants of inflation volatility and expected inflation ...
Política monetaria en el modelo con expectativas, curva de Phillips: práctica de ordenador
Directory of Open Access Journals (Sweden)
Jana Hromcová
2009-12-01
Full Text Available Recomendamos un ejercicio numérico que permite a los estudiantes observar la dinámica de un simple modelo, compuesto por la curva de Phillips, ley de Okun y demanda agregada, ante variaciones en la política monetaria. El ejercicio tiene como objetivo enseñar a los estudiantes la importancia de la manera en la que se forman las expectativas y la (nocredibilidad del banco central para el cumplimiento de los objetivos de la política monetaria.
Kriminalinė pasaka: žanrų suliejimas istorijos atpirkimui Jayne Anne Phillips romane „Quiet Dell“
Milvidaitė, Salomėja
2016-01-01
Fairy Tale True Crime: Genre Bending for the Redemption of History in Jayne Anne Phillips' “Quiet Dell” Jayne Anne Phillips’ novel Quiet Dell (2013) depicts a true story concerning the infamous murders in the eponymous hamlet near Phillips’ hometown in West Virginia. The true crime story, however, is given a twist when the first ghostly appearance takes place. The purpose of the present BA paper is to analyse how, by employing various fantastic elements, the genres of true crime and fairy tal...
DEFF Research Database (Denmark)
Bernstein, Daniel J.; Birkner, Peter; Lange, Tanja
2013-01-01
-arithmetic level are as follows: (1) use Edwards curves instead of Montgomery curves; (2) use extended Edwards coordinates; (3) use signed-sliding-window addition-subtraction chains; (4) batch primes to increase the window size; (5) choose curves with small parameters and base points; (6) choose curves with large...
International Nuclear Information System (INIS)
1977-12-01
An engineering assessment was performed of the problems resulting from the existence of radioactive uranium mill tailings at the Phillips/United Nuclear site at Ambrosia Lake, New Mexico. Services included the preparation of topographic maps, the performance of core drillings sufficient to determine areas and volumes of tailings, and radiometric measurements to determine radium-contaminated materials, the evaluation of resulting radiation exposures of individuals and nearby populations, the investigation of site hydrology and meteorology, and the evaluation and costing of alternative corrective actions. Radon gas release from the 2.6 million tons of tailings at the Phillips/United Nuclear site constitutes the most significant environmental impact, although windblown tailings and external gamma radiation are also factors. The estimated radiological health effects to the general population are considered to be minimal. The two alternative actions presented are: dike stabilization, fencing, and maintenance; and adding 2 ft of stabilization cover material. Both options include remedial action at off-site structures and on-site decontamination around the tailings pile. Cost estimates for the two options are $920,000 and $2,230,000, respectively
Directory of Open Access Journals (Sweden)
Adolfo Sachsida
2013-12-01
Full Text Available Este artigo faz uma ampla revisão da literatura sobre a curva de Phillips no Brasil. De maneira geral, os resultados descritos na literatura nacional se mostraram muito sensíveis ao período analisado, ao conjunto de proxies adotadas, ao instrumental econométrico empregado, e a frequência e ao número de defasagens permitidas para as variáveis. Tais resultados lançam dúvidas sobre a adequação da curva de Phillips para descrever a dinâmica inflacionária da economia brasileira.
Directory of Open Access Journals (Sweden)
Janusz Charatonik
1991-11-01
Full Text Available Results concerning contractibility of curves (equivalently: of dendroids are collected and discussed in the paper. Interrelations tetween various conditions which are either sufficient or necessary for a curve to be contractible are studied.
Directory of Open Access Journals (Sweden)
Hein Eckhard
2014-01-01
Full Text Available The German debt brake is often regarded as a great success story and has therefore served as a role model for the Euro area and it’s Fiscal Compact. In this paper we fundamentally criticise the debt brake. Firstly, we show that it suffers from serious shortcomings and that its success is far from certain even from a mainstream point of view. Secondly, we show that, from a Post-Keynesian perspective, the debt brake completely neglects the requirements for fiscal policies of member countries in a currency union like the Euro area. It will prevent fiscal policy from contributing to the necessary rebalancing in the Euro area. Thirdly, we show that alternative scenarios, which could avoid the deflationary pressures of the German Debt Brake on domestic demand and contribute to internally rebalancing the Euro area, are extremely unlikely as they would have to rely on unrealistic shifts in the functional income distribution and/or investment and savings behaviour in Germany.
Directory of Open Access Journals (Sweden)
Ken Chamuva Shawa
2012-06-01
Full Text Available The institution of sound monetary policies largely depends on a good understanding of the money demand function. While there have been studies to understand the behaviour of the money demand function in general, critical analyses solely devoted to testing Keynesian propositions, particularly in developing countries, are rare. Using data from 1970 to 2005, the study employs the Augmented Dickey-Fuller (ADF procedure to test for non-stationarity and the Johansen procedure to test for a long-run equilibrium relationship among economic fundamentals. Due to non-stationarity of variables an error-correction mechanism is used to characterise the money demand function in Malawi. Although the income elasticity of money demand bears the expected positive sign, contrary to Keynes’ contentions, the study finds a stable demand function and an inelastic interest rate elasticity of money demand. The level of financial development and exchange rates are also found significant in influencing money demand in Malawi. Vital policy implications can be drawn from the results. First, monetary policy should be undertaken bearing in mind the stability of the money demand function and the less than proportionate response of money demand to interest rate changes. Second, policies to improve the functioning of the financial sector are indispensable. Nonetheless, such policies should be supported by prudent exchange rate management to check currency substitution.
Energy Technology Data Exchange (ETDEWEB)
Hayter, J. [Pangaea Systems Inc., Calgary, AB (Canada)
2003-07-01
This PowerPoint presentation outlined the elements of an automated safety program that Pangaea Systems Inc. has provided to ConocoPhillips Canada Ltd. SHEAR is a web-based computer application that centralizes health, safety and environment documentation to enable better reporting and improved business analysis of management involvement; hazard identification and risk control; rules and work procedures; training; communication; and, incident and accident reporting and investigation. SHEAR collects findings from audits, site inspections, safety meetings, hazards and risks, and accidents. Its purpose is to identify, classify and better understand events and to develop a process for remedial action. This presentation described SHEAR's incident severity potential index, the incident reporting process, and the elements of the management system. 8 figs.
Directory of Open Access Journals (Sweden)
Ralph Armbruster
2015-08-01
Full Text Available The globalization of the world economy has created new opportunities for cross-border labor organizing. In this paper I examine two case studies of cross -border labor organizing. One case involves Phillips Van-Hernen (PVH workers in Guatemala City, and the other Ford automobile workers in Cuautitlan, Mexico. The PVH case illustrates the potential for cross-border labor organizing in the highly mobile garment industry. The PVH workers' union and their cross-border allies adopted a "strategic cross-border organizing model" that included consumer and trade pressure, an active international trade secretariat, and several other strategies, to achieve an amazing victory. However, the Ford Cuautitlan case demonstrates that corporatist state-labor relations and internal union conflicts have limited cross-border organizing in the automobile industry. These two case studies and their different outcomes have many important lessons for academics and activists interested in cross-border labor organizing.
THEORIES ON THE MONEY NON-NEUTRAL NATURE AND DE-MONOPOLIZATION
Directory of Open Access Journals (Sweden)
MADALINA RADOI
2014-11-01
Full Text Available At the beginning of the 90’s there was a consensus as to the vital theoretical matters on monetary policy with the result that currently there are few diverging points regarding the fact that a modification in the money offer generates, on a short term, significant consequences on production, while, on a long term, it influences prices. Consequently, the idea that money is neutral on a long term has been accepted, this position being adopted especially by Austrian monetary specialists. Such conclusions were triggered by the divergent points on Phillips curve on the basis of several long debates between Keynesian supporters, monetarists and theoreticians of rational prevention. As it is well known, Phillips curve is an inverse relationship between inflation and unemployment, whose stability on a long term determined the UK Keynesian economists to regard this curve as the equation missing from the Keynesian model, i.e. the one which links price production and occupation modifications. The curve has also been adopted in the USA by Paul Samuelson and Robert Solow, where it seemed to be valid at the beginning of the ‘60s.
Directory of Open Access Journals (Sweden)
René Pellissier
2012-01-01
Full Text Available This paper explores the notion ofjump ing the curve,following from Handy 's S-curve onto a new curve with new rules policies and procedures. . It claims that the curve does not generally lie in wait but has to be invented by leadership. The focus of this paper is the identification (mathematically and inferentially ofthat point in time, known as the cusp in catastrophe theory, when it is time to change - pro-actively, pre-actively or reactively. These three scenarios are addressed separately and discussed in terms ofthe relevance ofeach.
Directory of Open Access Journals (Sweden)
Nureev Rustem, M.
2016-03-01
focuses on the contributions of R. Clower and A. Leijonhufvud to grasping the role of uncertainty and expectations in the original concepts of Keynes and his contributions to the study of disequilibrium economy. Finally, we investigate the contribution of post-Keynesians (J. V. Robinson, P. Sraffa and N. Kaldor, the rise and the fall of the Phillips curve, as well as the criticism of the Keynesian doctrine given by the monetarists, adherents of supply-side economics, new classical economics, the theory of rational expectations and the public choice.
Martínez, Sol Sáez; de la Rosa, Félix Martínez; Rojas, Sergio
2017-01-01
In Advanced Calculus, our students wonder if it is possible to graphically represent a tornado by means of a three-dimensional curve. In this paper, we show it is possible by providing the parametric equations of such tornado-shaped curves.
Simulating Supernova Light Curves
International Nuclear Information System (INIS)
Even, Wesley Paul; Dolence, Joshua C.
2016-01-01
This report discusses supernova light simulations. A brief review of supernovae, basics of supernova light curves, simulation tools used at LANL, and supernova results are included. Further, it happens that many of the same methods used to generate simulated supernova light curves can also be used to model the emission from fireballs generated by explosions in the earth's atmosphere.
Simulating Supernova Light Curves
Energy Technology Data Exchange (ETDEWEB)
Even, Wesley Paul [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Dolence, Joshua C. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
2016-05-05
This report discusses supernova light simulations. A brief review of supernovae, basics of supernova light curves, simulation tools used at LANL, and supernova results are included. Further, it happens that many of the same methods used to generate simulated supernova light curves can also be used to model the emission from fireballs generated by explosions in the earth’s atmosphere.
Image scaling curve generation
2012-01-01
The present invention relates to a method of generating an image scaling curve, where local saliency is detected in a received image. The detected local saliency is then accumulated in the first direction. A final scaling curve is derived from the detected local saliency and the image is then
Image scaling curve generation.
2011-01-01
The present invention relates to a method of generating an image scaling curve, where local saliency is detected in a received image. The detected local saliency is then accumulated in the first direction. A final scaling curve is derived from the detected local saliency and the image is then
Tempo curves considered harmful
Desain, P.; Honing, H.
1993-01-01
In the literature of musicology, computer music research and the psychology of music, timing or tempo measurements are mostly presented in the form of continuous curves. The notion of these tempo curves is dangerous, despite its widespread use, because it lulls its users into the false impression
Chou, Kai-Seng
2001-01-01
Although research in curve shortening flow has been very active for nearly 20 years, the results of those efforts have remained scattered throughout the literature. For the first time, The Curve Shortening Problem collects and illuminates those results in a comprehensive, rigorous, and self-contained account of the fundamental results.The authors present a complete treatment of the Gage-Hamilton theorem, a clear, detailed exposition of Grayson''s convexity theorem, a systematic discussion of invariant solutions, applications to the existence of simple closed geodesics on a surface, and a new, almost convexity theorem for the generalized curve shortening problem.Many questions regarding curve shortening remain outstanding. With its careful exposition and complete guide to the literature, The Curve Shortening Problem provides not only an outstanding starting point for graduate students and new investigations, but a superb reference that presents intriguing new results for those already active in the field.
Directory of Open Access Journals (Sweden)
Paulo Prochno
2004-07-01
Full Text Available Learning curves have been studied for a long time. These studies provided strong support to the hypothesis that, as organizations produce more of a product, unit costs of production decrease at a decreasing rate (see Argote, 1999 for a comprehensive review of learning curve studies. But the organizational mechanisms that lead to these results are still underexplored. We know some drivers of learning curves (ADLER; CLARK, 1991; LAPRE et al., 2000, but we still lack a more detailed view of the organizational processes behind those curves. Through an ethnographic study, I bring a comprehensive account of the first year of operations of a new automotive plant, describing what was taking place on in the assembly area during the most relevant shifts of the learning curve. The emphasis is then on how learning occurs in that setting. My analysis suggests that the overall learning curve is in fact the result of an integration process that puts together several individual ongoing learning curves in different areas throughout the organization. In the end, I propose a model to understand the evolution of these learning processes and their supporting organizational mechanisms.
International Nuclear Information System (INIS)
Brambila-Paz, F.; Duong Minh Duc.
1990-12-01
A scattering theory for the wave equation with compactly supported perturbations was developed by Lax-Phillips in 1967. Using Enss approach, Phillips developed a Lax-Phillips scattering theory with short range perturbations of the type: V(x)=o((1)/|x| β ), β > 2. In this paper we develop a scattering theory for more general perturbations, i.e. for V(x)=(φ(x))/|x| β , where β=2-(n)/s, φ is an element of L s (R n ), s > 2 and s ≥ (n)/2. Refs
Buonanno, Paolo; Fergusson, Leopoldo; Vargas, Juan Fernando
2014-01-01
We document the existence of a Crime Kuznets Curve in US states since the 1970s. As income levels have risen, crime has followed an inverted U-shaped pattern, first increasing and then dropping. The Crime Kuznets Curve is not explained by income inequality. In fact, we show that during the sample period inequality has risen monotonically with income, ruling out the traditional Kuznets Curve. Our finding is robust to adding a large set of controls that are used in the literature to explain the...
Energy Technology Data Exchange (ETDEWEB)
S Gilchrist; A Gates; E Elzinga; M Gorring; z Szabo
2011-12-31
The abandoned Phillips sulfide mine in the critical Highlands watershed in New York has been shown to produce strongly acidic mine drainage (AMD) with anomalous metal contaminants in first-order streams that exceeded local water standards by up to several orders of magnitude (Gilchrist et al., 2009). The metal-sulfide-rich tailings also produce contaminated soils with pH < 4, organic matter < 2.5% and trace metals sequestered in soil oxides. A geochemical transect to test worst-case soil contamination showed that Cr, Co and Ni correlated positively with Mn, (r = 0.72, r = 0.89, r = 0.80, respectively), suggesting Mn-oxide sequestration and that Cu and Pb correlated with Fe (r = 0.76, r = 0.83, respectively), suggesting sequestration in goethite. Ubiquitous, yellow coating on the mine wastes, including jarosite and goethite, is a carrier of the metals. Geochemical and {mu}-SXRF analyses determined Cu to be the major soil contaminant, {mu}-SXRF also demonstrated that the heterogeneous nature of the soil chemistry at the micro-meter scale is self-similar to those in the bulk soil samples. Generally metals decreased, with some fluctuations, rapidly downslope through suspension of fines and dissolution in AMD leaving the area of substantial contamination << 0.5 km from the source.
Energy Technology Data Exchange (ETDEWEB)
1990-05-01
A constructed wetlands waste water treatment system has been constructed at Phillips High School, Bear Creek, Alabama, to polish the effluent from the school's extended aeration package treatment plant. The project is a demonstration of innovative technology under the Congressionally appropriated Bear Creek Floatway projects. Construction was completed in August 1988 at a cost of $36,266. Monitoring results for the period October 1988 through July 1989 reveal that the system has been very effective in polishing the effluent from the package treatment plant. The effectiveness is attributed primarily to maintenance of an overall oxidizing environment within the gravel substrate. Average monthly removals during the first year of operation exceeded 90 percent for BOD, TSS, organic nitrogen, total phosphorus, dissolved phosphorus, and fecal coliforms. Average removal percentages ranged in the 80s for ammonia and total nitrogen and in the 70s for nitrate + nitrite nitrogen and dissolved BOD. The prevalence of oxidizing conditions is probably the result of low carbonaceous demand, the low inlet hydraulic loading rate, and the combination of the shallow gravel depth and the excellent plant coverage and root depths during the first year of operation. 11 refs., 17 figs., 2 tabs.
Energy Technology Data Exchange (ETDEWEB)
Bielecki, J.; Scholz, M.; Drozdowicz, K. [Institute of Nuclear Physics, Polish Academy of Sciences, PL-31342 Krakow (Poland); Giacomelli, L. [CCFE, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Istituto di Fisica del Plasma “P. Caldirola,” Milano (Italy); Kiptily, V.; Kempenaars, M. [CCFE, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Conroy, S. [CCFE, Culham Science Centre, Abingdon OX14 3DB (United Kingdom); Department of Physics and Astronomy, Uppsala University (Sweden); Craciunescu, T. [IAP, National Institute for Laser Plasma and Radiation Physics, Bucharest (Romania); Collaboration: EUROfusion Consortium, JET, Culham Science Centre, Abingdon OX14 3DB (United Kingdom)
2015-09-15
A method of tomographic reconstruction of the neutron emissivity in the poloidal cross section of the Joint European Torus (JET, Culham, UK) tokamak was developed. Due to very limited data set (two projection angles, 19 lines of sight only) provided by the neutron emission profile monitor (KN3 neutron camera), the reconstruction is an ill-posed inverse problem. The aim of this work consists in making a contribution to the development of reliable plasma tomography reconstruction methods that could be routinely used at JET tokamak. The proposed method is based on Phillips-Tikhonov regularization and incorporates a priori knowledge of the shape of normalized neutron emissivity profile. For the purpose of the optimal selection of the regularization parameters, the shape of normalized neutron emissivity profile is approximated by the shape of normalized electron density profile measured by LIDAR or high resolution Thomson scattering JET diagnostics. In contrast with some previously developed methods of ill-posed plasma tomography reconstruction problem, the developed algorithms do not include any post-processing of the obtained solution and the physical constrains on the solution are imposed during the regularization process. The accuracy of the method is at first evaluated by several tests with synthetic data based on various plasma neutron emissivity models (phantoms). Then, the method is applied to the neutron emissivity reconstruction for JET D plasma discharge #85100. It is demonstrated that this method shows good performance and reliability and it can be routinely used for plasma neutron emissivity reconstruction on JET.
Una discusión sobre la curva de Phillips de Friedman y la tasa natural de desempleo
Directory of Open Access Journals (Sweden)
Leonardo Raffo López
2007-01-01
Full Text Available En este escrito se evalúa la consistencia teórica de la Curva de Phillips de Milton Friedman. Para esto se retoma la exposición de Friedman, destacando sus aportes al análisis de corto plazo del desempleo, los salarios y los precios, frente a la teoría de los clásicos y a la de Keynes. Se examina la hipótesis basada en la tasa natural de desempleo, revisando la utilización de los conceptos de desempleo involuntario, equilibrio macroeconómico e información imperfecta, así como los mecanismos de formación de expectativas de empresarios y trabajadores. Se concluye que su modelo es impreciso e incompleto y que su hipótesis se derrumba si la tasa natural de desempleo es endógena y cambia con los choques exógenos de demanda agregada.
Directory of Open Access Journals (Sweden)
Kožul Nataša
2014-01-01
Full Text Available In the broadest sense, yield curve indicates the market's view of the evolution of interest rates over time. However, given that cost of borrowing it closely linked to creditworthiness (ability to repay, different yield curves will apply to different currencies, market sectors, or even individual issuers. As government borrowing is indicative of interest rate levels available to other market players in a particular country, and considering that bond issuance still remains the dominant form of sovereign debt, this paper describes yield curve construction using bonds. The relationship between zero-coupon yield, par yield and yield to maturity is given and their usage in determining curve discount factors is described. Their usage in deriving forward rates and pricing related derivative instruments is also discussed.
U.S. Environmental Protection Agency — an UV calibration curve for SRHA quantitation. This dataset is associated with the following publication: Chang, X., and D. Bouchard. Surfactant-Wrapped Multiwalled...
International Nuclear Information System (INIS)
Gruhn, C.R.
1981-05-01
An alternative utilization is presented for the gaseous ionization chamber in the detection of energetic heavy ions, which is called Bragg Curve Spectroscopy (BCS). Conceptually, BCS involves using the maximum data available from the Bragg curve of the stopping heavy ion (HI) for purposes of identifying the particle and measuring its energy. A detector has been designed that measures the Bragg curve with high precision. From the Bragg curve the range from the length of the track, the total energy from the integral of the specific ionization over the track, the dE/dx from the specific ionization at the beginning of the track, and the Bragg peak from the maximum of the specific ionization of the HI are determined. This last signal measures the atomic number, Z, of the HI unambiguously
Directory of Open Access Journals (Sweden)
Sutawanir Darwis
2012-05-01
Full Text Available Empirical decline curve analysis of oil production data gives reasonable answer in hyperbolic type curves situations; however the methodology has limitations in fitting real historical production data in present of unusual observations due to the effect of the treatment to the well in order to increase production capacity. The development ofrobust least squares offers new possibilities in better fitting production data using declinecurve analysis by down weighting the unusual observations. This paper proposes a robustleast squares fitting lmRobMM approach to estimate the decline rate of daily production data and compares the results with reservoir simulation results. For case study, we usethe oil production data at TBA Field West Java. The results demonstrated that theapproach is suitable for decline curve fitting and offers a new insight in decline curve analysis in the present of unusual observations.
DEFF Research Database (Denmark)
Georgieva Yankova, Ginka; Federici, Paolo
This report describes power curve measurements carried out on a given turbine in a chosen period. The measurements are carried out in accordance to IEC 61400-12-1 Ed. 1 and FGW Teil 2.......This report describes power curve measurements carried out on a given turbine in a chosen period. The measurements are carried out in accordance to IEC 61400-12-1 Ed. 1 and FGW Teil 2....
Alexeev, Valery; Clemens, C Herbert; Beauville, Arnaud
2008-01-01
This book is devoted to recent progress in the study of curves and abelian varieties. It discusses both classical aspects of this deep and beautiful subject as well as two important new developments, tropical geometry and the theory of log schemes. In addition to original research articles, this book contains three surveys devoted to singularities of theta divisors, of compactified Jacobians of singular curves, and of "strange duality" among moduli spaces of vector bundles on algebraic varieties.
Modelos lineares e não lineares da curva de Phillips para previsão da taxa de inflação no Brasil
Directory of Open Access Journals (Sweden)
Elano Ferreira Arruda
2011-09-01
Full Text Available Este trabalho compara previsões da taxa de inflação mensal brasileira a partir de diferentes modelos lineares e não lineares de séries temporais e da curva de Phillips. Em geral, os modelos não lineares apresentaram um melhor desempenho preditivo. Um modelo VAR produziu o menor erro quadrático médio de previsão (EQM entre os modelos lineares, enquanto as melhores previsões, entre todos os modelos, foram geradas pela curva de Phillips ampliada com threshold, a qual apresentou um EQM 20% menor do que a do modelo VAR. Essa diferença é significante de acordo com o teste de Diebold e Mariano (1995.
Directory of Open Access Journals (Sweden)
Marcos Antonio C. da Silveira
2008-09-01
Full Text Available New Keynesian dynamic stochastic general equilibrium (DSGE models have been developed for monetary policy analysis in open economies. For this purpose, the basic model must be enriched with the sources of nominal and real rigidities which are capable of explaining the observed output and inflation persistence. Under this perspective, we use the Bayesian approach to estimate and compare alternative model specifications for the Brazilian economy with respect to two endogenous persistence mechanisms widely supported by the international empirical literature: habit formation and price indexation. Using data for the inflation target period, we conclude for the relevance of both mechanisms, although the evidence is unexpectly less robust for price indexation. Furthermore, impulse-response functions are built to describe the dynamic effects of domestic and foreign real and monetary shocks.Modelos de equilíbrio geral dinâmicos e estocásticos têm sido desenvolvidos para a análise de política monetária em economias abertas. Com este propósito, o modelo básico precisa ser enriquecido com as fontes de rigidez nominal e real que são capazes de explicar a persistência observada no produto e na inflação. Com esta perspectiva, a metodologia bayesiana é usada para estimar e comparar alternativas especificações de modelos para a economia brasileira no tocante a dois mecanismos endógenos de persistência amplamente postulados pela literatura empírica internacional: formação de hábito e indexação de preços. Usando dados do período de metas de inflação, nossa conclusão é pela relevância de ambos os mecanismos, embora a evidência seja inesperadamente menos robusta para indexação de preços. Além disso, funções impulsoresposta são construídas para descrever os efeitos dinâmicos de choques estruturais domésticos e externos, reais e monetários.
DEFF Research Database (Denmark)
Harck, Søren H.
2003-01-01
I lyset af de senere års modeldebat i Danmark sammenholdes løndannelsen og i mindre grad prisdannelsen i SMEC 99 - den senest dokumenterede version af Det økonomiske Råds sekretariats makroøkonomiske model - med forgængeren SMEC 94 og også med en benchmark-model med "klassiske" langsigts-egenskab......I lyset af de senere års modeldebat i Danmark sammenholdes løndannelsen og i mindre grad prisdannelsen i SMEC 99 - den senest dokumenterede version af Det økonomiske Råds sekretariats makroøkonomiske model - med forgængeren SMEC 94 og også med en benchmark-model med "klassiske" langsigts......-egenskaber i form af en lodret langsigts-Phillips-kurve/udbuds-kurve. Det viser sig, at SMEC 99 lige så lidt som SMEC 94 indeholder en langsigtet trade off mellem ledighed og lønkvote/realløn og et strukturelt bestemt langsigtet ledighedsniveau. Til gengæld indeholder SMEC 99 (ligesom SMEC 94) en langsigtet...... trade off mellem ledighed og inflation i form af en ordinær, stabil 60'er Phillips-kurve. Men 60'er Phillips-kurven i SMEC 99 er væsentligt fladere end i SMEC 94, og strukturelle forhold spiller en reduceret rolle: i SMEC 99 er lønkvoten/reallønnen pr. konstruktion blevet (gjort) helt betydningsløs...
Kirouac-Fram, Jaclyn
2010-01-01
The move to consolidate, and eventually to close, Homer G. Phillips Hospital sparked a major uprising in St. Louis, Missouri, during the years 1976 through 1984. This article explores the struggle in St. Louis’s black community to keep open, and later to reopen, Homer G. Phillips Hospital from a vantage point that demonstrates the diversity of opinion surrounding the struggle. For many black St. Louis residents, the physical space of Homer G. Phillips Hospital was a metaphor for identity, a manifestation of citizenship rights, and a means of delineating a territory of shared histories, understandings, and values. For others, it was a relic of segregation and racism. In seeking to understand the diversity of public reaction, this article addresses class antagonism, examines the varied and divergent motivations for eliminating or maintaining services at the hospital, and reconsiders the discourse of "black politics." It is a decisive illustration of how the national twin crises of deindustrialization and privatization affected a heterogeneous black community.
Approximation by planar elastic curves
DEFF Research Database (Denmark)
Brander, David; Gravesen, Jens; Nørbjerg, Toke Bjerge
2016-01-01
We give an algorithm for approximating a given plane curve segment by a planar elastic curve. The method depends on an analytic representation of the space of elastic curve segments, together with a geometric method for obtaining a good initial guess for the approximating curve. A gradient......-driven optimization is then used to find the approximating elastic curve....
DEFF Research Database (Denmark)
Gómez Arranz, Paula; Vesth, Allan
This report describes the power curve measurements carried out on a given wind turbine in a chosen period. The measurements were carried out following the measurement procedure in the draft of IEC 61400-12-1 Ed.2 [1], with some deviations mostly regarding uncertainty calculation. Here, the refere......This report describes the power curve measurements carried out on a given wind turbine in a chosen period. The measurements were carried out following the measurement procedure in the draft of IEC 61400-12-1 Ed.2 [1], with some deviations mostly regarding uncertainty calculation. Here......, the reference wind speed used in the power curve is the equivalent wind speed obtained from lidar measurements at several heights between lower and upper blade tip, in combination with a hub height meteorological mast. The measurements have been performed using DTU’s measurement equipment, the analysis...
Curved electromagnetic missiles
International Nuclear Information System (INIS)
Myers, J.M.; Shen, H.M.; Wu, T.T.
1989-01-01
Transient electromagnetic fields can exhibit interesting behavior in the limit of great distances from their sources. In situations of finite total radiated energy, the energy reaching a distant receiver can decrease with distance much more slowly than the usual r - 2 . Cases of such slow decrease have been referred to as electromagnetic missiles. All of the wide variety of known missiles propagate in essentially straight lines. A sketch is presented here of a missile that can follow a path that is strongly curved. An example of a curved electromagnetic missile is explicitly constructed and some of its properties are discussed. References to details available elsewhere are given
Algebraic curves and cryptography
Murty, V Kumar
2010-01-01
It is by now a well-known paradigm that public-key cryptosystems can be built using finite Abelian groups and that algebraic geometry provides a supply of such groups through Abelian varieties over finite fields. Of special interest are the Abelian varieties that are Jacobians of algebraic curves. All of the articles in this volume are centered on the theme of point counting and explicit arithmetic on the Jacobians of curves over finite fields. The topics covered include Schoof's \\ell-adic point counting algorithm, the p-adic algorithms of Kedlaya and Denef-Vercauteren, explicit arithmetic on
IGMtransmission: Transmission curve computation
Harrison, Christopher M.; Meiksin, Avery; Stock, David
2015-04-01
IGMtransmission is a Java graphical user interface that implements Monte Carlo simulations to compute the corrections to colors of high-redshift galaxies due to intergalactic attenuation based on current models of the Intergalactic Medium. The effects of absorption due to neutral hydrogen are considered, with particular attention to the stochastic effects of Lyman Limit Systems. Attenuation curves are produced, as well as colors for a wide range of filter responses and model galaxy spectra. Photometric filters are included for the Hubble Space Telescope, the Keck telescope, the Mt. Palomar 200-inch, the SUBARU telescope and UKIRT; alternative filter response curves and spectra may be readily uploaded.
International Nuclear Information System (INIS)
Hancock, G.J.; Webster, I.T.
1998-01-01
Recent work has shown that estuarine sediments are a source of radium (Ra) to coastal waters (Bollinger and Moore, 1982, Webster et al., 1994; Hancock et al., 1997). Ra is soluble in saline water (Moore, 1992, Webster et al., 1995) and is rapidly desorbed into porewater from deposited fluvial sediments where it is continuously generated by insoluble Th parents. The rate at which Ra effuses into surface water has been used to determine the rate of surface-water pore water exchange (Hancock and Murray, 1996). Once in the water column, the behaviour of Ra is essentially conservative, enabling the determination of water residence time in a semi-enclosed estuary (Turekian et al., 1996). Here we use measurements of Ra in an estuary to estimate two water mixing processes. Port Phillip Bay (PPB) is a semi-enclosed estuary adjacent to the city of Melbourne, one of the highest density population centres in Australia. The Bay is approximately 50 km in diameter, and has an average depth of 14 m. A recent study found that the potential for eutrophication and algal blooms in the Bay was intricately linked to the fate of nutrients, particularly nitrogen, discharged into the Bay from rivers, drains, and sewage treatment plants (Harris et al. 1996). Two of the most important processes controlling the levels of inorganic N in the water column were identified as bio irrigation of bottom sediments, and the rate of exchange of Bay water with ocean water via Bass Strait. In this paper we describe how Ra isotopes can be used to estimate the rates of these processes, and we compare these rates with estimates made using conventional techniques. Water and sediment samples were collected from five sites in February 1996. Sediment cores were collected by divers, frozen, and sectioned in the laboratory. Surface, mid depth and bottom water samples were collected using a Niskin bottle. Radionuclide activities were determined by alpha spectrometry (Martin and Hancock, 1992) and gamma spectrometry
Catching up with the Keynesians
Ljungqvist, L.; Uhlig, H.F.H.V.S.
1996-01-01
This paper examines the role for tax policies in productivity-shock driven economies with \\catching-up-with-the-Joneses" utility functions.The optimal tax policy is shown to a ect the economy countercyclically via procyclical taxes, i.e., \\cooling down" the economy with higher taxes when it is
Learning from uncertain curves
DEFF Research Database (Denmark)
Mallasto, Anton; Feragen, Aasa
2017-01-01
We introduce a novel framework for statistical analysis of populations of nondegenerate Gaussian processes (GPs), which are natural representations of uncertain curves. This allows inherent variation or uncertainty in function-valued data to be properly incorporated in the population analysis. Us...
DEFF Research Database (Denmark)
Federici, Paolo; Kock, Carsten Weber
This report describes the power curve measurements performed with a nacelle LIDAR on a given wind turbine in a wind farm and during a chosen measurement period. The measurements and analysis are carried out in accordance to the guidelines in the procedure “DTU Wind Energy-E-0019” [1]. The reporting...
DEFF Research Database (Denmark)
Vesth, Allan; Kock, Carsten Weber
The report describes power curve measurements carried out on a given wind turbine. The measurements are carried out in accordance to Ref. [1]. A site calibration has been carried out; see Ref. [2], and the measured flow correction factors for different wind directions are used in the present...... analyze of power performance of the turbine....
DEFF Research Database (Denmark)
Federici, Paolo; Vesth, Allan
The report describes power curve measurements carried out on a given wind turbine. The measurements are carried out in accordance to Ref. [1]. A site calibration has been carried out; see Ref. [2], and the measured flow correction factors for different wind directions are used in the present...... analyze of power performance of the turbine....
DEFF Research Database (Denmark)
Villanueva, Héctor; Gómez Arranz, Paula
The report describes power curve measurements carried out on a given wind turbine. The measurements are carried out in accordance to Ref. [1]. A site calibration has been carried out; see Ref. [2], and the measured flow correction factors for different wind directions are used in the present...... analyze of power performance of the turbine...
Groot, L.F.M.|info:eu-repo/dai/nl/073642398
2008-01-01
The purpose of this paper is twofold. First, it exhibits that standard tools in the measurement of income inequality, such as the Lorenz curve and the Gini-index, can successfully be applied to the issues of inequality measurement of carbon emissions and the equity of abatement policies across
Hunter, Walter M.
This document contains detailed directions for constructing a device that mechanically produces the three-dimensional shape resulting from the rotation of any algebraic line or curve around either axis on the coordinate plant. The device was developed in response to student difficulty in visualizing, and thus grasping the mathematical principles…
DEFF Research Database (Denmark)
Gómez Arranz, Paula; Wagner, Rozenn
This report describes the power curve measurements performed with a nacelle LIDAR on a given wind turbine in a wind farm and during a chosen measurement period. The measurements and analysis are carried out in accordance to the guidelines in the procedure “DTU Wind Energy-E-0019” [1]. The reporting...
DEFF Research Database (Denmark)
Vesth, Allan; Kock, Carsten Weber
The report describes power curve measurements carried out on a given wind turbine. The measurements are carried out in accordance to Ref. [1]. A site calibration has been carried out; see Ref. [2], and the measured flow correction factors for different wind directions are used in the present...
Textbook Factor Demand Curves.
Davis, Joe C.
1994-01-01
Maintains that teachers and textbook graphics follow the same basic pattern in illustrating changes in demand curves when product prices increase. Asserts that the use of computer graphics will enable teachers to be more precise in their graphic presentation of price elasticity. (CFR)
Bernstein, D.J.; Birkner, P.; Lange, T.; Peters, C.P.
2013-01-01
This paper introduces EECM-MPFQ, a fast implementation of the elliptic-curve method of factoring integers. EECM-MPFQ uses fewer modular multiplications than the well-known GMP-ECM software, takes less time than GMP-ECM, and finds more primes than GMP-ECM. The main improvements above the
DEFF Research Database (Denmark)
Federici, Paolo; Kock, Carsten Weber
The report describes power curve measurements carried out on a given wind turbine. The measurements are carried out in accordance to Ref. [1]. A site calibration has been carried out; see Ref. [2], and the measured flow correction factors for different wind directions are used in the present...... analyze of power performance of the turbine...
Indian Academy of Sciences (India)
ARTICLE-IN-A-BOX. 797. RESONANCE │ September 2011. The war years interrupted the efforts of both Feynman and Schwinger to tackle the divergence problems in quantum electrodynamics, another of Dirac's pioneering creations from 1927. In 1965 the Physics Nobel Prize was shared by the two of them and Sin-Ichiro ...
Indian Academy of Sciences (India)
While the two relativity theories were largely the creation of Albert Einstein, the quantum ... of what may lie in store for anyone who dares to follow the beat of a different drum. ... saw Feynman's exceptional talents and in a special lecture explained to him the beautiful principle ... The Character of Physical Law – 1965. c).
Walker, Judy L
2000-01-01
When information is transmitted, errors are likely to occur. Coding theory examines efficient ways of packaging data so that these errors can be detected, or even corrected. The traditional tools of coding theory have come from combinatorics and group theory. Lately, however, coding theorists have added techniques from algebraic geometry to their toolboxes. In particular, by re-interpreting the Reed-Solomon codes, one can see how to define new codes based on divisors on algebraic curves. For instance, using modular curves over finite fields, Tsfasman, Vladut, and Zink showed that one can define a sequence of codes with asymptotically better parameters than any previously known codes. This monograph is based on a series of lectures the author gave as part of the IAS/PCMI program on arithmetic algebraic geometry. Here, the reader is introduced to the exciting field of algebraic geometric coding theory. Presenting the material in the same conversational tone of the lectures, the author covers linear codes, inclu...
Energy Technology Data Exchange (ETDEWEB)
Groot, L. [Utrecht University, Utrecht School of Economics, Janskerkhof 12, 3512 BL Utrecht (Netherlands)
2008-11-15
The purpose of this paper is twofold. First, it exhibits that standard tools in the measurement of income inequality, such as the Lorenz curve and the Gini-index, can successfully be applied to the issues of inequality measurement of carbon emissions and the equity of abatement policies across countries. These tools allow policy-makers and the general public to grasp at a single glance the impact of conventional distribution rules such as equal caps or grandfathering, or more sophisticated ones, on the distribution of greenhouse gas emissions. Second, using the Samuelson rule for the optimal provision of a public good, the Pareto-optimal distribution of carbon emissions is compared with the distribution that follows if countries follow Nash-Cournot abatement strategies. It is shown that the Pareto-optimal distribution under the Samuelson rule can be approximated by the equal cap division, represented by the diagonal in the Lorenz curve diagram.
Pelce, Pierre
1989-01-01
In recent years, much progress has been made in the understanding of interface dynamics of various systems: hydrodynamics, crystal growth, chemical reactions, and combustion. Dynamics of Curved Fronts is an important contribution to this field and will be an indispensable reference work for researchers and graduate students in physics, applied mathematics, and chemical engineering. The book consist of a 100 page introduction by the editor and 33 seminal articles from various disciplines.
David G. Blanchflower; Andrew J. Oswald
1992-01-01
The paper provides evidence for the existence of a negatively sloped locus linking the level of pay to the rate of regional (or industry) unemployment. This "wage curve" is estimated using microeconomic data for Britain, the US, Canada, Korea, Austria, Italy, Holland, Switzerland, Norway, and Germany, The average unemployment elasticity of pay is approximately -0.1. The paper sets out a multi-region efficiency wage model and argues that its predictions are consistent with the data.
Anatomical curve identification
Bowman, Adrian W.; Katina, Stanislav; Smith, Joanna; Brown, Denise
2015-01-01
Methods for capturing images in three dimensions are now widely available, with stereo-photogrammetry and laser scanning being two common approaches. In anatomical studies, a number of landmarks are usually identified manually from each of these images and these form the basis of subsequent statistical analysis. However, landmarks express only a very small proportion of the information available from the images. Anatomically defined curves have the advantage of providing a much richer expression of shape. This is explored in the context of identifying the boundary of breasts from an image of the female torso and the boundary of the lips from a facial image. The curves of interest are characterised by ridges or valleys. Key issues in estimation are the ability to navigate across the anatomical surface in three-dimensions, the ability to recognise the relevant boundary and the need to assess the evidence for the presence of the surface feature of interest. The first issue is addressed by the use of principal curves, as an extension of principal components, the second by suitable assessment of curvature and the third by change-point detection. P-spline smoothing is used as an integral part of the methods but adaptations are made to the specific anatomical features of interest. After estimation of the boundary curves, the intermediate surfaces of the anatomical feature of interest can be characterised by surface interpolation. This allows shape variation to be explored using standard methods such as principal components. These tools are applied to a collection of images of women where one breast has been reconstructed after mastectomy and where interest lies in shape differences between the reconstructed and unreconstructed breasts. They are also applied to a collection of lip images where possible differences in shape between males and females are of interest. PMID:26041943
Estimating Corporate Yield Curves
Antionio Diaz; Frank Skinner
2001-01-01
This paper represents the first study of retail deposit spreads of UK financial institutions using stochastic interest rate modelling and the market comparable approach. By replicating quoted fixed deposit rates using the Black Derman and Toy (1990) stochastic interest rate model, we find that the spread between fixed and variable rates of interest can be modeled (and priced) using an interest rate swap analogy. We also find that we can estimate an individual bank deposit yield curve as a spr...
Vo, Martin
2017-08-01
Light Curves Classifier uses data mining and machine learning to obtain and classify desired objects. This task can be accomplished by attributes of light curves or any time series, including shapes, histograms, or variograms, or by other available information about the inspected objects, such as color indices, temperatures, and abundances. After specifying features which describe the objects to be searched, the software trains on a given training sample, and can then be used for unsupervised clustering for visualizing the natural separation of the sample. The package can be also used for automatic tuning parameters of used methods (for example, number of hidden neurons or binning ratio). Trained classifiers can be used for filtering outputs from astronomical databases or data stored locally. The Light Curve Classifier can also be used for simple downloading of light curves and all available information of queried stars. It natively can connect to OgleII, OgleIII, ASAS, CoRoT, Kepler, Catalina and MACHO, and new connectors or descriptors can be implemented. In addition to direct usage of the package and command line UI, the program can be used through a web interface. Users can create jobs for ”training” methods on given objects, querying databases and filtering outputs by trained filters. Preimplemented descriptors, classifier and connectors can be picked by simple clicks and their parameters can be tuned by giving ranges of these values. All combinations are then calculated and the best one is used for creating the filter. Natural separation of the data can be visualized by unsupervised clustering.
Uniformization of elliptic curves
Ülkem, Özge; Ulkem, Ozge
2015-01-01
Every elliptic curve E defined over C is analytically isomorphic to C*=qZ for some q ∊ C*. Similarly, Tate has shown that if E is defined over a p-adic field K, then E is analytically isomorphic to K*=qZ for some q ∊ K . Further the isomorphism E(K) ≅ K*/qZ respects the action of the Galois group GK/K, where K is the algebraic closure of K. I will explain the construction of this isomorphism.
Roc curves for continuous data
Krzanowski, Wojtek J
2009-01-01
Since ROC curves have become ubiquitous in many application areas, the various advances have been scattered across disparate articles and texts. ROC Curves for Continuous Data is the first book solely devoted to the subject, bringing together all the relevant material to provide a clear understanding of how to analyze ROC curves.The fundamental theory of ROC curvesThe book first discusses the relationship between the ROC curve and numerous performance measures and then extends the theory into practice by describing how ROC curves are estimated. Further building on the theory, the authors prese
International Nuclear Information System (INIS)
1977-12-01
An engineering assessment was performed of the problems resulting from the existence of radioactive uranium mill tailings at the Phillips/United Nuclear site at Ambrosia Lake, New Mexico. Services included the preparation of topographic maps, the performance of core drillings sufficient to determine areas and volumes of tailings and radiometric measurements to determine radium-contaminated materials, the evaluation of resulting radiation exposures of individuals and nearby populations, the investigation of site hydrology and meteorology, and the evaluation and costing of alternative corrective actions. Radon gas release from the 2.6 million tons of tailings at the Phillips/United Nuclear site constitutes the most significant environmental impact, although windblown tailings and external gamma radiation are also factors. The estimated radiological health effects to the general population are considered to be minimal. The two alternative actions presented are: dike stabilization, fencing, and maintenance; and adding 2 ft of stabilization cover material. Both options include remedial action at off-site structures and on-site decontamination around the tailings pile. Cost estimates for the two options are $920,000 and $2,230,000, respectively
International Nuclear Information System (INIS)
Dobrowolski, Tomasz
2012-01-01
The constant curvature one and quasi-one dimensional Josephson junction is considered. On the base of Maxwell equations, the sine–Gordon equation that describes an influence of curvature on the kink motion was obtained. It is showed that the method of geometrical reduction of the sine–Gordon model from three to lower dimensional manifold leads to an identical form of the sine–Gordon equation. - Highlights: ► The research on dynamics of the phase in a curved Josephson junction is performed. ► The geometrical reduction is applied to the sine–Gordon model. ► The results of geometrical reduction and the fundamental research are compared.
Directory of Open Access Journals (Sweden)
Je Hyun Baekt
2000-01-01
Full Text Available A numerical study is conducted on the fully-developed laminar flow of an incompressible viscous fluid in a square duct rotating about a perpendicular axis to the axial direction of the duct. At the straight duct, the rotation produces vortices due to the Coriolis force. Generally two vortex cells are formed and the axial velocity distribution is distorted by the effect of this Coriolis force. When a convective force is weak, two counter-rotating vortices are shown with a quasi-parabolic axial velocity profile for weak rotation rates. As the rotation rate increases, the axial velocity on the vertical centreline of the duct begins to flatten and the location of vorticity center is moved near to wall by the effect of the Coriolis force. When the convective inertia force is strong, a double-vortex secondary flow appears in the transverse planes of the duct for weak rotation rates but as the speed of rotation increases the secondary flow is shown to split into an asymmetric configuration of four counter-rotating vortices. If the rotation rates are increased further, the secondary flow restabilizes to a slightly asymmetric double-vortex configuration. Also, a numerical study is conducted on the laminar flow of an incompressible viscous fluid in a 90°-bend square duct that rotates about axis parallel to the axial direction of the inlet. At a 90°-bend square duct, the feature of flow by the effect of a Coriolis force and a centrifugal force, namely a secondary flow by the centrifugal force in the curved region and the Coriolis force in the downstream region, is shown since the centrifugal force in curved region and the Coriolis force in downstream region are dominant respectively.
Elliptic curves for applications (Tutorial)
Lange, T.; Bernstein, D.J.; Chatterjee, S.
2011-01-01
More than 25 years ago, elliptic curves over finite fields were suggested as a group in which the Discrete Logarithm Problem (DLP) can be hard. Since then many researchers have scrutinized the security of the DLP on elliptic curves with the result that for suitably chosen curves only exponential
Titration Curves: Fact and Fiction.
Chamberlain, John
1997-01-01
Discusses ways in which datalogging equipment can enable titration curves to be measured accurately and how computing power can be used to predict the shape of curves. Highlights include sources of error, use of spreadsheets to generate titration curves, titration of a weak acid with a strong alkali, dibasic acids, weak acid and weak base, and…
Inference regarding multiple structural changes in linear models with endogenous regressors☆
Hall, Alastair R.; Han, Sanggohn; Boldea, Otilia
2012-01-01
This paper considers the linear model with endogenous regressors and multiple changes in the parameters at unknown times. It is shown that minimization of a Generalized Method of Moments criterion yields inconsistent estimators of the break fractions, but minimization of the Two Stage Least Squares (2SLS) criterion yields consistent estimators of these parameters. We develop a methodology for estimation and inference of the parameters of the model based on 2SLS. The analysis covers the cases where the reduced form is either stable or unstable. The methodology is illustrated via an application to the New Keynesian Phillips Curve for the US. PMID:23805021
New directions in stabilisation policies
Directory of Open Access Journals (Sweden)
Ralf Fendel
2004-12-01
Full Text Available Recently, a new class of macroeconomic business cycle models has emerged. Stochastic dynamic general equilibrium models with rational expectations originally employed by RBC researchers are combined with nominal rigidities and imperfect competition traditionally highlighted by New Keynesian economists. This class of models leads to a new paradigm in business cycle theory and stabilization policies. The paper presents the main characteristics and implications of the new class of models in a predominantly non-technical way. In order to highlight the progress connected with the new class of models, it puts them into the context of former debates on stabilization policy, such as the Phillips curve dispute.
Directory of Open Access Journals (Sweden)
Sergey A. Cherkis
2007-03-01
Full Text Available A typical solution of an integrable system is described in terms of a holomorphic curve and a line bundle over it. The curve provides the action variables while the time evolution is a linear flow on the curve's Jacobian. Even though the system of Nahm equations is closely related to the Hitchin system, the curves appearing in these two cases have very different nature. The former can be described in terms of some classical scattering problem while the latter provides a solution to some Seiberg-Witten gauge theory. This note identifies the setup in which one can formulate the question of relating the two curves.
Johnson, L. E.; Kim, J.; Cifelli, R.; Chandra, C. V.
2016-12-01
Potential water retention, S, is one of parameters commonly used in hydrologic modeling for soil moisture accounting. Physically, S indicates total amount of water which can be stored in soil and is expressed in units of depth. S can be represented as a change of soil moisture content and in this context is commonly used to estimate direct runoff, especially in the Soil Conservation Service (SCS) curve number (CN) method. Generally, the lumped and the distributed hydrologic models can easily use the SCS-CN method to estimate direct runoff. Changes in potential water retention have been used in previous SCS-CN studies; however, these studies have focused on long-term hydrologic simulations where S is allowed to vary at the daily time scale. While useful for hydrologic events that span multiple days, the resolution is too coarse for short-term applications such as flash flood events where S may not recover its full potential. In this study, a new method for estimating a time-variable potential water retention at hourly time-scales is presented. The methodology is applied for the Napa River basin, California. The streamflow gage at St Helena, located in the upper reaches of the basin, is used as the control gage site to evaluate the model performance as it is has minimal influences by reservoirs and diversions. Rainfall events from 2011 to 2012 are used for estimating the event-based SCS CN to transfer to S. As a result, we have derived the potential water retention curve and it is classified into three sections depending on the relative change in S. The first is a negative slope section arising from the difference in the rate of moving water through the soil column, the second is a zero change section representing the initial recovery the potential water retention, and the third is a positive change section representing the full recovery of the potential water retention. Also, we found that the soil water moving has traffic jam within 24 hours after finished first
Energy Technology Data Exchange (ETDEWEB)
Lippoldt, Stefan
2016-01-21
In this thesis we study a formulation of Dirac fermions in curved spacetime that respects general coordinate invariance as well as invariance under local spin base transformations. We emphasize the advantages of the spin base invariant formalism both from a conceptual as well as from a practical viewpoint. This suggests that local spin base invariance should be added to the list of (effective) properties of (quantum) gravity theories. We find support for this viewpoint by the explicit construction of a global realization of the Clifford algebra on a 2-sphere which is impossible in the spin-base non-invariant vielbein formalism. The natural variables for this formulation are spacetime-dependent Dirac matrices subject to the Clifford-algebra constraint. In particular, a coframe, i.e. vielbein field is not required. We disclose the hidden spin base invariance of the vielbein formalism. Explicit formulas for the spin connection as a function of the Dirac matrices are found. This connection consists of a canonical part that is completely fixed in terms of the Dirac matrices and a free part that can be interpreted as spin torsion. The common Lorentz symmetric gauge for the vielbein is constructed for the Dirac matrices, even for metrics which are not linearly connected. Under certain criteria, it constitutes the simplest possible gauge, demonstrating why this gauge is so useful. Using the spin base formulation for building a field theory of quantized gravity and matter fields, we show that it suffices to quantize the metric and the matter fields. This observation is of particular relevance for field theory approaches to quantum gravity, as it can serve for a purely metric-based quantization scheme for gravity even in the presence of fermions. Hence, in the second part of this thesis we critically examine the gauge, and the field-parametrization dependence of renormalization group flows in the vicinity of non-Gaussian fixed points in quantum gravity. While physical
Directory of Open Access Journals (Sweden)
Jarrad K Baker
Full Text Available Port Phillip Bay, Australia, is a large semi-closed bay with over four million people living in its catchment basin. The Bay receives waters from the Yarra River which drains the city of Melbourne, as well as receiving the discharges of sewage treatment plants and petrochemical and agricultural chemicals. A 1999 study demonstrated that fish inhabiting Port Phillip Bay showed signs of effects related to pollutant exposure despite pollution management practices having been implemented for over a decade. To assess the current health status of the fish inhabiting the Bay, a follow up survey was conducted in 2015. A suite of biomarkers of exposure and effects were measured to determine the health status of Port Phillip Bay sand flathead (Platycephalus bassensis, namely ethoxyresorufin-O-deethylase (EROD activity, polycyclic aromatic hydrocarbons (PAH biliary metabolites, carboxylesterase activity (CbE and DNA damage (8-oxo-dG. The reduction in EROD activity in the present study suggests a decline in the presence of EROD activity-inducing chemicals within the Bay since the 1990s. Fish collected in the most industrialised/urbanised sites did not display higher PAH metabolite levels than those in less developed areas of the Bay. Ratios of PAH biliary metabolite types were used to indicate PAH contaminant origin. Ratios indicated fish collected at Corio Bay and Hobsons Bay were subjected to increased low molecular weight hydrocarbons of petrogenic origin, likely attributed to the close proximity of these sites to oil refineries, compared to PAH biliary metabolites in fish from Geelong Arm and Mordialloc. Quantification of DNA damage indicated a localised effect of exposure to pollutants, with a 10-fold higher DNA damage level in fish sampled from the industrial site of Corio Bay relative to the less developed site of Sorrento. Overall, integration of biomarkers by multivariate analysis indicated that the health of fish collected in industrialised areas
Directory of Open Access Journals (Sweden)
Denise Almeida Silva
2008-01-01
Full Text Available http://dx.doi.org/10.5007/2175-8026.2008n54p39 Este estudo analisa a construção ficcional da identidade do migrante em The Lonely Londoners (1956, de Samuel Selvon e The Final Passage (1985, de Caryl Phillips. Ambos os romances enfocam a experiência da geração Windrush, recrutada das colônias para suprir mão de obra na Inglaterra do pós-guerra. Ressalta-se o espaço intersticial ocupado pelas comunidades migrantes, e estuda-se a construção da identidade nessas obras dentro do contexto das relações culturais, analisando-se as políticas de afiliação, pertencimento e exclusão implícitas na formação dessas comunidades diaspóricas.
Directory of Open Access Journals (Sweden)
Samir Adamoglu de Oliveira
2017-01-01
Full Text Available This work has as goal to evaluate how the paper of Phillips, Lawrence and Hardy (2004 and their discourse analysis model has been appropriated in the Organizational Studies field. Using a bibliometric measure of quoters and the qualitative analysis of quotation context, this paper describes: (i the way it was applied empirically in researches, (ii to what study objects it was applied, (iii in which thematic areas it was used, and (iv its repercussion among different theoretical slopes that have used the analytical model. As it was one of the first works to consider the possibility of a discourse analysis within the organizational studies using institutionalism, after 10 years of the publication, the results show perennial as a meta-theoretical base to discuss the theme. Considering those, the present paper proposes a theoretical-methodological model to conduct future discussions about the discourse role in the (reproduction of institutional web. Keywords Discourse analysis; Discourse; Institutions; Quotation contexts.
Sadek, Mohammad
2010-01-01
In this thesis we give insight into the minimisation problem of genus one curves defined by equations other than Weierstrass equations. We are interested in genus one curves given as double covers of P1, plane cubics, or complete intersections of two quadrics in P3. By minimising such a curve we mean making the invariants associated to its defining equations as small as possible using a suitable change of coordinates. We study the non-uniqueness of minimisations of the genus one curves des...
Quantum fields in curved space
International Nuclear Information System (INIS)
Birrell, N.D.; Davies, P.C.W.
1982-01-01
The book presents a comprehensive review of the subject of gravitational effects in quantum field theory. Quantum field theory in Minkowski space, quantum field theory in curved spacetime, flat spacetime examples, curved spacetime examples, stress-tensor renormalization, applications of renormalization techniques, quantum black holes and interacting fields are all discussed in detail. (U.K.)
Extended analysis of cooling curves
International Nuclear Information System (INIS)
Djurdjevic, M.B.; Kierkus, W.T.; Liliac, R.E.; Sokolowski, J.H.
2002-01-01
Thermal Analysis (TA) is the measurement of changes in a physical property of a material that is heated through a phase transformation temperature range. The temperature changes in the material are recorded as a function of the heating or cooling time in such a manner that allows for the detection of phase transformations. In order to increase accuracy, characteristic points on the cooling curve have been identified using the first derivative curve plotted versus time. In this paper, an alternative approach to the analysis of the cooling curve has been proposed. The first derivative curve has been plotted versus temperature and all characteristic points have been identified with the same accuracy achieved using the traditional method. The new cooling curve analysis also enables the Dendrite Coherency Point (DCP) to be detected using only one thermocouple. (author)
Computational aspects of algebraic curves
Shaska, Tanush
2005-01-01
The development of new computational techniques and better computing power has made it possible to attack some classical problems of algebraic geometry. The main goal of this book is to highlight such computational techniques related to algebraic curves. The area of research in algebraic curves is receiving more interest not only from the mathematics community, but also from engineers and computer scientists, because of the importance of algebraic curves in applications including cryptography, coding theory, error-correcting codes, digital imaging, computer vision, and many more.This book cove
51Cr - erythrocyte survival curves
International Nuclear Information System (INIS)
Paiva Costa, J. de.
1982-07-01
Sixteen patients were studied, being fifteen patients in hemolytic state, and a normal individual as a witness. The aim was to obtain better techniques for the analysis of the erythrocytes, survival curves, according to the recommendations of the International Committee of Hematology. It was used the radiochromatic method as a tracer. Previously a revisional study of the International Literature was made in its aspects inherent to the work in execution, rendering possible to establish comparisons and clarify phonomena observed in cur investigation. Several parameters were considered in this study, hindering both the exponential and the linear curves. The analysis of the survival curves of the erythrocytes in the studied group, revealed that the elution factor did not present a homogeneous answer quantitatively to all, though, the result of the analysis of these curves have been established, through listed programs in the electronic calculator. (Author) [pt
Melting curves of gammairradiated DNA
International Nuclear Information System (INIS)
Hofer, H.; Altmann, H.; Kehrer, M.
1978-08-01
Melting curves of gammairradiated DNA and data derived of them, are reported. The diminished stability is explained by basedestruction. DNA denatures completely at room temperature, if at least every fifth basepair is broken or weakened by irradiation. (author)
Management of the learning curve
DEFF Research Database (Denmark)
Pedersen, Peter-Christian; Slepniov, Dmitrij
2016-01-01
Purpose – This paper focuses on the management of the learning curve in overseas capacity expansions. The purpose of this paper is to unravel the direct as well as indirect influences on the learning curve and to advance the understanding of how these affect its management. Design...... the dimensions of the learning process involved in a capacity expansion project and identified the direct and indirect labour influences on the production learning curve. On this basis, the study proposes solutions to managing learning curves in overseas capacity expansions. Furthermore, the paper concludes...... with measures that have the potential to significantly reduce the non-value-added time when establishing new capacities overseas. Originality/value – The paper uses a longitudinal in-depth case study of a Danish wind turbine manufacturer and goes beyond a simplistic treatment of the lead time and learning...
Growth curves for Laron syndrome.
Laron, Z; Lilos, P; Klinger, B
1993-01-01
Growth curves for children with Laron syndrome were constructed on the basis of repeated measurements made throughout infancy, childhood, and puberty in 24 (10 boys, 14 girls) of the 41 patients with this syndrome investigated in our clinic. Growth retardation was already noted at birth, the birth length ranging from 42 to 46 cm in the 12/20 available measurements. The postnatal growth curves deviated sharply from the normal from infancy on. Both sexes showed no clear pubertal spurt. Girls co...
Flow over riblet curved surfaces
Energy Technology Data Exchange (ETDEWEB)
Loureiro, J B R; Freire, A P Silva, E-mail: atila@mecanica.ufrj.br [Mechanical Engineering Program, Federal University of Rio de Janeiro (COPPE/UFRJ), C.P. 68503, 21.941-972, Rio de Janeiro, RJ (Brazil)
2011-12-22
The present work studies the mechanics of turbulent drag reduction over curved surfaces by riblets. The effects of surface modification on flow separation over steep and smooth curved surfaces are investigated. Four types of two-dimensional surfaces are studied based on the morphometric parameters that describe the body of a blue whale. Local measurements of mean velocity and turbulence profiles are obtained through laser Doppler anemometry (LDA) and particle image velocimetry (PIV).
Intersection numbers of spectral curves
Eynard, B.
2011-01-01
We compute the symplectic invariants of an arbitrary spectral curve with only 1 branchpoint in terms of integrals of characteristic classes in the moduli space of curves. Our formula associates to any spectral curve, a characteristic class, which is determined by the laplace transform of the spectral curve. This is a hint to the key role of Laplace transform in mirror symmetry. When the spectral curve is y=\\sqrt{x}, the formula gives Kontsevich--Witten intersection numbers, when the spectral curve is chosen to be the Lambert function \\exp{x}=y\\exp{-y}, the formula gives the ELSV formula for Hurwitz numbers, and when one chooses the mirror of C^3 with framing f, i.e. \\exp{-x}=\\exp{-yf}(1-\\exp{-y}), the formula gives the Marino-Vafa formula, i.e. the generating function of Gromov-Witten invariants of C^3. In some sense this formula generalizes ELSV, Marino-Vafa formula, and Mumford formula.
International Nuclear Information System (INIS)
Haverkamp, U.; Wiezorek, C.; Poetter, R.
1990-01-01
Lyoluminescence dosimetry is based upon light emission during dissolution of previously irradiated dosimetric materials. The lyoluminescence signal is expressed in the dissolution glow curve. These curves begin, depending on the dissolution system, with a high peak followed by an exponentially decreasing intensity. System parameters that influence the graph of the dissolution glow curve, are, for example, injection speed, temperature and pH value of the solution and the design of the dissolution cell. The initial peak does not significantly correlate with the absorbed dose, it is mainly an effect of the injection. The decay of the curve consists of two exponential components: one fast and one slow. The components depend on the absorbed dose and the dosimetric materials used. In particular, the slow component correlates with the absorbed dose. In contrast to the fast component the argument of the exponential function of the slow component is independent of the dosimetric materials investigated: trehalose, glucose and mannitol. The maximum value, following the peak of the curve, and the integral light output are a measure of the absorbed dose. The reason for the different light outputs of various dosimetric materials after irradiation with the same dose is the differing solubility. The character of the dissolution glow curves is the same following irradiation with photons, electrons or neutrons. (author)
Curve Boxplot: Generalization of Boxplot for Ensembles of Curves.
Mirzargar, Mahsa; Whitaker, Ross T; Kirby, Robert M
2014-12-01
In simulation science, computational scientists often study the behavior of their simulations by repeated solutions with variations in parameters and/or boundary values or initial conditions. Through such simulation ensembles, one can try to understand or quantify the variability or uncertainty in a solution as a function of the various inputs or model assumptions. In response to a growing interest in simulation ensembles, the visualization community has developed a suite of methods for allowing users to observe and understand the properties of these ensembles in an efficient and effective manner. An important aspect of visualizing simulations is the analysis of derived features, often represented as points, surfaces, or curves. In this paper, we present a novel, nonparametric method for summarizing ensembles of 2D and 3D curves. We propose an extension of a method from descriptive statistics, data depth, to curves. We also demonstrate a set of rendering and visualization strategies for showing rank statistics of an ensemble of curves, which is a generalization of traditional whisker plots or boxplots to multidimensional curves. Results are presented for applications in neuroimaging, hurricane forecasting and fluid dynamics.
Considerations for reference pump curves
International Nuclear Information System (INIS)
Stockton, N.B.
1992-01-01
This paper examines problems associated with inservice testing (IST) of pumps to assess their hydraulic performance using reference pump curves to establish acceptance criteria. Safety-related pumps at nuclear power plants are tested under the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code (the Code), Section 11. The Code requires testing pumps at specific reference points of differential pressure or flow rate that can be readily duplicated during subsequent tests. There are many cases where test conditions cannot be duplicated. For some pumps, such as service water or component cooling pumps, the flow rate at any time depends on plant conditions and the arrangement of multiple independent and constantly changing loads. System conditions cannot be controlled to duplicate a specific reference value. In these cases, utilities frequently request to use pump curves for comparison of test data for acceptance. There is no prescribed method for developing a pump reference curve. The methods vary and may yield substantially different results. Some results are conservative when compared to the Code requirements; some are not. The errors associated with different curve testing techniques should be understood and controlled within reasonable bounds. Manufacturer's pump curves, in general, are not sufficiently accurate to use as reference pump curves for IST. Testing using reference curves generated with polynomial least squares fits over limited ranges of pump operation, cubic spline interpolation, or cubic spline least squares fits can provide a measure of pump hydraulic performance that is at least as accurate as the Code required method. Regardless of the test method, error can be reduced by using more accurate instruments, by correcting for systematic errors, by increasing the number of data points, and by taking repetitive measurements at each data point
Directory of Open Access Journals (Sweden)
Denise Almeida Silva
2010-06-01
Full Text Available
Este estudo analisa a construção ficcional da identidade do migrante em The Lonely Londoners (1956, de Samuel Selvon e The Final Passage (1985, de Caryl Phillips. Ambos os romances enfocam a experiência da geração Windrush, recrutada das colônias para suprir mão de obra na Inglaterra do pós-guerra. Ressalta-se o espaço intersticial ocupado pelas comunidades migrantes, e estuda-se a construção da identidade nessas obras dentro do contexto das relações culturais, analisando-se as políticas de afiliação, pertencimento e exclusão implícitas na formação dessas comunidades diaspóricas.
International Nuclear Information System (INIS)
Hancock, G.J.; Hunter, J.R.
1999-01-01
Rates of sediment accumulation, sediment mixing and depositional particle fluxes were estimated by use of excess 210 Pb and 228 Th. In central Port Phillip Bay, there was a rapidly mixed surface layer and two layers of different mixing rates at 2-20 cm and 2145 cm depths. When the sediment profiles of excess 210 Pb and 228 Th were combined and diffusive mixing was assumed, the sediment accumulation rate in the 2-20 cm layer was constrained to be -1 . The mixing coefficient in the 2-20 cm layer was 5.0 ± 0.1 cm 2 year -1 . Hence, mixing rather than sedimentation governs the distribution of 210 Pb and 228 Th in the surficial 20 cm. Below 20 cm, the different mixing regime may be due to the dominance of deposit-feeders at these depths. Evidence for bioturbation to a depth of 50 cm was obtained from profiles of excess 210 Pb and 228 Ra deficiency. The mean residence time of particles in the central bay water column was 10 ± 2 days (a normalized depositional particle flux of 0.16 ± 0.02 g cm -2 year -1 ). This flux is three times the upper estimate of the sediment accumulation rate, indicating that most of the suspended particulate matter in the water column is resuspended bottom sediment. Copyright (1997) CSIRO Publishing
Curve Digitizer – A software for multiple curves digitizing
Directory of Open Access Journals (Sweden)
Florentin ŞPERLEA
2010-06-01
Full Text Available The Curve Digitizer is software that extracts data from an image file representing a graphicand returns them as pairs of numbers which can then be used for further analysis and applications.Numbers can be read on a computer screen stored in files or copied on paper. The final result is adata set that can be used with other tools such as MSEXCEL. Curve Digitizer provides a useful toolfor any researcher or engineer interested in quantifying the data displayed graphically. The image filecan be obtained by scanning a document
Calibration curves for biological dosimetry
International Nuclear Information System (INIS)
Guerrero C, C.; Brena V, M. . E-mail cgc@nuclear.inin.mx
2004-01-01
The generated information by the investigations in different laboratories of the world, included the ININ, in which settles down that certain class of chromosomal leisure it increases in function of the dose and radiation type, has given by result the obtaining of calibrated curves that are applied in the well-known technique as biological dosimetry. In this work is presented a summary of the work made in the laboratory that includes the calibrated curves for gamma radiation of 60 Cobalt and X rays of 250 k Vp, examples of presumed exposure to ionizing radiation, resolved by means of aberration analysis and the corresponding dose estimate through the equations of the respective curves and finally a comparison among the dose calculations in those people affected by the accident of Ciudad Juarez, carried out by the group of Oak Ridge, USA and those obtained in this laboratory. (Author)
Vertex algebras and algebraic curves
Frenkel, Edward
2004-01-01
Vertex algebras are algebraic objects that encapsulate the concept of operator product expansion from two-dimensional conformal field theory. Vertex algebras are fast becoming ubiquitous in many areas of modern mathematics, with applications to representation theory, algebraic geometry, the theory of finite groups, modular functions, topology, integrable systems, and combinatorics. This book is an introduction to the theory of vertex algebras with a particular emphasis on the relationship with the geometry of algebraic curves. The notion of a vertex algebra is introduced in a coordinate-independent way, so that vertex operators become well defined on arbitrary smooth algebraic curves, possibly equipped with additional data, such as a vector bundle. Vertex algebras then appear as the algebraic objects encoding the geometric structure of various moduli spaces associated with algebraic curves. Therefore they may be used to give a geometric interpretation of various questions of representation theory. The book co...
Curve collection, extension of databases
International Nuclear Information System (INIS)
Gillemot, F.
1992-01-01
Full text: Databases: generally calculated data only. The original measurements: diagrams. Information loss between them Expensive research eg. irradiation, aging, creep etc. Original curves should be stored for reanalysing. The format of the stored curves: a. Data in ASCII files, only numbers b. Other information in strings in a second file Same name, but different extension. Extensions shows the type of the test and the type of the file. EXAMPLES. TEN is tensile information, TED is tensile data, CHN is Charpy informations, CHD is Charpy data. Storing techniques: digitalised measurements, digitalising old curves stored on paper. Use: making catalogues, reanalysing, comparison with new data. Tools: mathematical software packages like quattro, genplot, exel, mathcad, qbasic, pascal, fortran, mathlab, grapher etc. (author)
Rational points on elliptic curves
Silverman, Joseph H
2015-01-01
The theory of elliptic curves involves a pleasing blend of algebra, geometry, analysis, and number theory. This book stresses this interplay as it develops the basic theory, thereby providing an opportunity for advanced undergraduates to appreciate the unity of modern mathematics. At the same time, every effort has been made to use only methods and results commonly included in the undergraduate curriculum. This accessibility, the informal writing style, and a wealth of exercises make Rational Points on Elliptic Curves an ideal introduction for students at all levels who are interested in learning about Diophantine equations and arithmetic geometry. Most concretely, an elliptic curve is the set of zeroes of a cubic polynomial in two variables. If the polynomial has rational coefficients, then one can ask for a description of those zeroes whose coordinates are either integers or rational numbers. It is this number theoretic question that is the main subject of this book. Topics covered include the geometry and ...
Theoretical melting curve of caesium
International Nuclear Information System (INIS)
Simozar, S.; Girifalco, L.A.; Pennsylvania Univ., Philadelphia
1983-01-01
A statistical-mechanical model is developed to account for the complex melting curve of caesium. The model assumes the existence of three different species of caesium defined by three different electronic states. On the basis of this model, the free energy of melting and the melting curve are computed up to 60 kbar, using the solid-state data and the initial slope of the fusion curve as input parameters. The calculated phase diagram agrees with experiment to within the experimental error. Other thermodynamic properties including the entropy and volume of melting were also computed, and they agree with experiment. Since the theory requires only one adjustable constant, this is taken as strong evidence that the three-species model is satisfactory for caesium. (author)
DEFF Research Database (Denmark)
Brücker, Herbert; Jahn, Elke J.
in a general equilibrium framework. For the empirical analysis we employ the IABS, a two percent sample of the German labor force. We find that the elasticity of the wage curve is particularly high for young workers and workers with a university degree, while it is low for older workers and workers...... Based on a wage curve approach we examine the labor market effects of migration in Germany. The wage curve relies on the assumption that wages respond to a change in the unemployment rate, albeit imperfectly. This allows one to derive the wage and employment effects of migration simultaneously...... with a vocational degree. The wage and employment effects of migration are moderate: a 1 percent increase in the German labor force through immigration increases the aggregate unemployment rate by less than 0.1 percentage points and reduces average wages by less 0.1 percent. While native workers benefit from...
Laffer Curves and Home Production
Directory of Open Access Journals (Sweden)
Kotamäki Mauri
2017-06-01
Full Text Available In the earlier related literature, consumption tax rate Laffer curve is found to be strictly increasing (see Trabandt and Uhlig (2011. In this paper, a general equilibrium macro model is augmented by introducing a substitute for private consumption in the form of home production. The introduction of home production brings about an additional margin of adjustment – an increase in consumption tax rate not only decreases labor supply and reduces the consumption tax base but also allows a substitution of market goods with home-produced goods. The main objective of this paper is to show that, after the introduction of home production, the consumption tax Laffer curve exhibits an inverse U-shape. Also the income tax Laffer curves are significantly altered. The result shown in this paper casts doubt on some of the earlier results in the literature.
Complexity of Curved Glass Structures
Kosić, T.; Svetel, I.; Cekić, Z.
2017-11-01
Despite the increasing number of research on the architectural structures of curvilinear forms and technological and practical improvement of the glass production observed over recent years, there is still a lack of comprehensive codes and standards, recommendations and experience data linked to real-life curved glass structures applications regarding design, manufacture, use, performance and economy. However, more and more complex buildings and structures with the large areas of glass envelope geometrically complex shape are built every year. The aim of the presented research is to collect data on the existing design philosophy on curved glass structure cases. The investigation includes a survey about how architects and engineers deal with different design aspects of curved glass structures with a special focus on the design and construction process, glass types and structural and fixing systems. The current paper gives a brief overview of the survey findings.
Optimization on Spaces of Curves
DEFF Research Database (Denmark)
Møller-Andersen, Jakob
in Rd, and methods to solve the initial and boundary value problem for geodesics allowing us to compute the Karcher mean and principal components analysis of data of curves. We apply the methods to study shape variation in synthetic data in the Kimia shape database, in HeLa cell nuclei and cycles...... of cardiac deformations. Finally we investigate a new application of Riemannian shape analysis in shape optimization. We setup a simple elliptic model problem, and describe how to apply shape calculus to obtain directional derivatives in the manifold of planar curves. We present an implementation based...
Tracing a planar algebraic curve
International Nuclear Information System (INIS)
Chen Falai; Kozak, J.
1994-09-01
In this paper, an algorithm that determines a real algebraic curve is outlined. Its basic step is to divide the plane into subdomains that include only simple branches of the algebraic curve without singular points. Each of the branches is then stably and efficiently traced in the particular subdomain. Except for the tracing, the algorithm requires only a couple of simple operations on polynomials that can be carried out exactly if the coefficients are rational, and the determination of zeros of several polynomials of one variable. (author). 5 refs, 4 figs
Signature Curves Statistics of DNA Supercoils
Shakiban, Cheri; Lloyd, Peter
2004-01-01
In this paper we describe the Euclidean signature curves for two dimensional closed curves in the plane and their generalization to closed space curves. The focus will be on discrete numerical methods for approximating such curves. Further we will apply these numerical methods to plot the signature curves related to three-dimensional simulated DNA supercoils. Our primary focus will be on statistical analysis of the data generated for the signature curves of the supercoils. We will try to esta...
Dual Smarandache Curves of a Timelike Curve lying on Unit dual Lorentzian Sphere
Kahraman, Tanju; Hüseyin Ugurlu, Hasan
2016-01-01
In this paper, we give Darboux approximation for dual Smarandache curves of time like curve on unit dual Lorentzian sphere. Firstly, we define the four types of dual Smarandache curves of a timelike curve lying on dual Lorentzian sphere.
Electro-Mechanical Resonance Curves
Greenslade, Thomas B., Jr.
2018-01-01
Recently I have been investigating the frequency response of galvanometers. These are direct-current devices used to measure small currents. By using a low-frequency function generator to supply the alternating-current signal and a stopwatch smartphone app to measure the period, I was able to take data to allow a resonance curve to be drawn. This…
2013-01-01
This software can be used to assist with the assessment of margin of safety for a horizontal curve. It is intended for use by engineers and technicians responsible for safety analysis or management of rural highway pavement or traffic control devices...
Principal Curves on Riemannian Manifolds.
Hauberg, Soren
2016-09-01
Euclidean statistics are often generalized to Riemannian manifolds by replacing straight-line interpolations with geodesic ones. While these Riemannian models are familiar-looking, they are restricted by the inflexibility of geodesics, and they rely on constructions which are optimal only in Euclidean domains. We consider extensions of Principal Component Analysis (PCA) to Riemannian manifolds. Classic Riemannian approaches seek a geodesic curve passing through the mean that optimizes a criteria of interest. The requirements that the solution both is geodesic and must pass through the mean tend to imply that the methods only work well when the manifold is mostly flat within the support of the generating distribution. We argue that instead of generalizing linear Euclidean models, it is more fruitful to generalize non-linear Euclidean models. Specifically, we extend the classic Principal Curves from Hastie & Stuetzle to data residing on a complete Riemannian manifold. We show that for elliptical distributions in the tangent of spaces of constant curvature, the standard principal geodesic is a principal curve. The proposed model is simple to compute and avoids many of the pitfalls of traditional geodesic approaches. We empirically demonstrate the effectiveness of the Riemannian principal curves on several manifolds and datasets.
Elliptic curves and primality proving
Atkin, A. O. L.; Morain, F.
1993-07-01
The aim of this paper is to describe the theory and implementation of the Elliptic Curve Primality Proving algorithm. Problema, numeros primos a compositis dignoscendi, hosque in factores suos primos resolvendi, ad gravissima ac utilissima totius arithmeticae pertinere, et geometrarum tum veterum tum recentiorum industriam ac sagacitatem occupavisse, tam notum est, ut de hac re copiose loqui superfluum foret.
Indian Academy of Sciences (India)
from biology, feel that every pattern in the living world, ranging from the folding of ... curves band c have the same rate of increase but reach different asymptotes. If these .... not at x = 0, but at xo' which is the minimum size at birth that will permit ...
Survival curves for irradiated cells
International Nuclear Information System (INIS)
Gibson, D.K.
1975-01-01
The subject of the lecture is the probability of survival of biological cells which have been subjected to ionising radiation. The basic mathematical theories of cell survival as a function of radiation dose are developed. A brief comparison with observed survival curves is made. (author)
Mentorship, learning curves, and balance.
Cohen, Meryl S; Jacobs, Jeffrey P; Quintessenza, James A; Chai, Paul J; Lindberg, Harald L; Dickey, Jamie; Ungerleider, Ross M
2007-09-01
Professionals working in the arena of health care face a variety of challenges as their careers evolve and develop. In this review, we analyze the role of mentorship, learning curves, and balance in overcoming challenges that all such professionals are likely to encounter. These challenges can exist both in professional and personal life. As any professional involved in health care matures, complex professional skills must be mastered, and new professional skills must be acquired. These skills are both technical and judgmental. In most circumstances, these skills must be learned. In 2007, despite the continued need for obtaining new knowledge and learning new skills, the professional and public tolerance for a "learning curve" is much less than in previous decades. Mentorship is the key to success in these endeavours. The success of mentorship is two-sided, with responsibilities for both the mentor and the mentee. The benefits of this relationship must be bidirectional. It is the responsibility of both the student and the mentor to assure this bidirectional exchange of benefit. This relationship requires time, patience, dedication, and to some degree selflessness. This mentorship will ultimately be the best tool for mastering complex professional skills and maturing through various learning curves. Professional mentorship also requires that mentors identify and explicitly teach their mentees the relational skills and abilities inherent in learning the management of the triad of self, relationships with others, and professional responsibilities.Up to two decades ago, a learning curve was tolerated, and even expected, while professionals involved in healthcare developed the techniques that allowed for the treatment of previously untreatable diseases. Outcomes have now improved to the point that this type of learning curve is no longer acceptable to the public. Still, professionals must learn to perform and develop independence and confidence. The responsibility to
Directory of Open Access Journals (Sweden)
Nicole E. Filby
2014-12-01
Full Text Available This study investigated Burrunan dolphin responses to dolphin-swim tour vessels across two time periods: 1998–2000 and 2011–2013. A total of 211 dolphin sightings were documented across 306 surveys. Sighting success rate and mean encounter time with dolphins decreased significantly by 12.8% and 8.2 min, respectively, between periods. Approaches that did not contravene regulations elicited highest approach responses by dolphins towards tour vessels, whereas dolphins’ responded to illegal approaches most frequently with avoidance. Small groups responded to tour vessels with avoidance significantly more than large groups. Initial dolphin behaviour had a strong effect on dolphin’s responses to tour vessels, with resting groups the most likely to exhibit avoidance. Calves were significantly more likely to be present during swims in 2011–2013. Dolphin’s responses to tour vessels changed across time, with effect responses (avoidance and approach increasing significantly as dolphins gained cumulative experience. These dolphins are forced to expend a greater level of time and energy avoiding or approaching boats, shifting from a non-effect response to an effect response. Consequences of this include possible decrease in biological fitness by detracting from core biological activities such as foraging and resting. Combined with a decrease in sighting success between periods, the results imply that this population of dolphins, which is endemic to Australia and listed as threatened under the Victorian Flora and Fauna Guarantee Act 1988, may not be well suited to the dolphin-swim industry. The management implications of these results warrant a shift from passive to active management in Port Phillip Bay. The importance of long-term research is highlighted, given behavioural responses detected herein would be undetected in short-term studies. Keywords: Burrunan dolphin (Tursiops australis, Avoidance, Behaviour, Compliance, Management
A catalog of special plane curves
Lawrence, J Dennis
2014-01-01
Among the largest, finest collections available-illustrated not only once for each curve, but also for various values of any parameters present. Covers general properties of curves and types of derived curves. Curves illustrated by a CalComp digital incremental plotter. 12 illustrations.
Computation of undulator tuning curves
International Nuclear Information System (INIS)
Dejus, Roger J.
1997-01-01
Computer codes for fast computation of on-axis brilliance tuning curves and flux tuning curves have been developed. They are valid for an ideal device (regular planar device or a helical device) using the Bessel function formalism. The effects of the particle beam emittance and the beam energy spread on the spectrum are taken into account. The applicability of the codes and the importance of magnetic field errors of real insertion devices are addressed. The validity of the codes has been experimentally verified at the APS and observed discrepancies are in agreement with predicted reduction of intensities due to magnetic field errors. The codes are distributed as part of the graphical user interface XOP (X-ray OPtics utilities), which simplifies execution and viewing of the results
Curved canals: Ancestral files revisited
Directory of Open Access Journals (Sweden)
Jain Nidhi
2008-01-01
Full Text Available The aim of this article is to provide an insight into different techniques of cleaning and shaping of curved root canals with hand instruments. Although a plethora of root canal instruments like ProFile, ProTaper, LightSpeed ® etc dominate the current scenario, the inexpensive conventional root canal hand files such as K-files and flexible files can be used to get optimum results when handled meticulously. Special emphasis has been put on the modifications in biomechanical canal preparation in a variety of curved canal cases. This article compiles a series of clinical cases of root canals with curvatures in the middle and apical third and with S-shaped curvatures that were successfully completed by employing only conventional root canal hand instruments.
Invariance for Single Curved Manifold
Castro, Pedro Machado Manhaes de
2012-01-01
Recently, it has been shown that, for Lambert illumination model, solely scenes composed by developable objects with a very particular albedo distribution produce an (2D) image with isolines that are (almost) invariant to light direction change. In this work, we provide and investigate a more general framework, and we show that, in general, the requirement for such in variances is quite strong, and is related to the differential geometry of the objects. More precisely, it is proved that single curved manifolds, i.e., manifolds such that at each point there is at most one principal curvature direction, produce invariant is surfaces for a certain relevant family of energy functions. In the three-dimensional case, the associated energy function corresponds to the classical Lambert illumination model with albedo. This result is also extended for finite-dimensional scenes composed by single curved objects. © 2012 IEEE.
Invariance for Single Curved Manifold
Castro, Pedro Machado Manhaes de
2012-08-01
Recently, it has been shown that, for Lambert illumination model, solely scenes composed by developable objects with a very particular albedo distribution produce an (2D) image with isolines that are (almost) invariant to light direction change. In this work, we provide and investigate a more general framework, and we show that, in general, the requirement for such in variances is quite strong, and is related to the differential geometry of the objects. More precisely, it is proved that single curved manifolds, i.e., manifolds such that at each point there is at most one principal curvature direction, produce invariant is surfaces for a certain relevant family of energy functions. In the three-dimensional case, the associated energy function corresponds to the classical Lambert illumination model with albedo. This result is also extended for finite-dimensional scenes composed by single curved objects. © 2012 IEEE.
Curved Folded Plate Timber Structures
Buri, Hans Ulrich; Stotz, Ivo; Weinand, Yves
2011-01-01
This work investigates the development of a Curved Origami Prototype made with timber panels. In the last fifteen years the timber industry has developed new, large size, timber panels. Composition and dimensions of these panels and the possibility of milling them with Computer Numerical Controlled machines shows great potential for folded plate structures. To generate the form of these structures we were inspired by Origami, the Japanese art of paper folding. Common paper tessellations are c...
Projection-based curve clustering
International Nuclear Information System (INIS)
Auder, Benjamin; Fischer, Aurelie
2012-01-01
This paper focuses on unsupervised curve classification in the context of nuclear industry. At the Commissariat a l'Energie Atomique (CEA), Cadarache (France), the thermal-hydraulic computer code CATHARE is used to study the reliability of reactor vessels. The code inputs are physical parameters and the outputs are time evolution curves of a few other physical quantities. As the CATHARE code is quite complex and CPU time-consuming, it has to be approximated by a regression model. This regression process involves a clustering step. In the present paper, the CATHARE output curves are clustered using a k-means scheme, with a projection onto a lower dimensional space. We study the properties of the empirically optimal cluster centres found by the clustering method based on projections, compared with the 'true' ones. The choice of the projection basis is discussed, and an algorithm is implemented to select the best projection basis among a library of orthonormal bases. The approach is illustrated on a simulated example and then applied to the industrial problem. (authors)
Growth curves for Laron syndrome.
Laron, Z; Lilos, P; Klinger, B
1993-01-01
Growth curves for children with Laron syndrome were constructed on the basis of repeated measurements made throughout infancy, childhood, and puberty in 24 (10 boys, 14 girls) of the 41 patients with this syndrome investigated in our clinic. Growth retardation was already noted at birth, the birth length ranging from 42 to 46 cm in the 12/20 available measurements. The postnatal growth curves deviated sharply from the normal from infancy on. Both sexes showed no clear pubertal spurt. Girls completed their growth between the age of 16-19 years to a final mean (SD) height of 119 (8.5) cm whereas the boys continued growing beyond the age of 20 years, achieving a final height of 124 (8.5) cm. At all ages the upper to lower body segment ratio was more than 2 SD above the normal mean. These growth curves constitute a model not only for primary, hereditary insulin-like growth factor-I (IGF-I) deficiency (Laron syndrome) but also for untreated secondary IGF-I deficiencies such as growth hormone gene deletion and idiopathic congenital isolated growth hormone deficiency. They should also be useful in the follow up of children with Laron syndrome treated with biosynthetic recombinant IGF-I. PMID:8333769
Elementary particles in curved spaces
International Nuclear Information System (INIS)
Lazanu, I.
2004-01-01
The theories in particle physics are developed currently, in Minkowski space-time starting from the Poincare group. A physical theory in flat space can be seen as the limit of a more general physical theory in a curved space. At the present time, a theory of particles in curved space does not exist, and thus the only possibility is to extend the existent theories in these spaces. A formidable obstacle to the extension of physical models is the absence of groups of motion in more general Riemann spaces. A space of constant curvature has a group of motion that, although differs from that of a flat space, has the same number of parameters and could permit some generalisations. In this contribution we try to investigate some physical implications of the presumable existence of elementary particles in curved space. In de Sitter space (dS) the invariant rest mass is a combination of the Poincare rest mass and the generalised angular momentum of a particle and it permits to establish a correlation with the vacuum energy and with the cosmological constant. The consequences are significant because in an experiment the local structure of space-time departs from the Minkowski space and becomes a dS or AdS space-time. Discrete symmetry characteristics of the dS/AdS group suggest some arguments for the possible existence of the 'mirror matter'. (author)
Dual Smarandache Curves and Smarandache Ruled Surfaces
Tanju KAHRAMAN; Mehmet ÖNDER; H. Hüseyin UGURLU
2013-01-01
In this paper, by considering dual geodesic trihedron (dual Darboux frame) we define dual Smarandache curves lying fully on dual unit sphere S^2 and corresponding to ruled surfaces. We obtain the relationships between the elements of curvature of dual spherical curve (ruled surface) x(s) and its dual Smarandache curve (Smarandache ruled surface) x1(s) and we give an example for dual Smarandache curves of a dual spherical curve.
A note on families of fragility curves
International Nuclear Information System (INIS)
Kaplan, S.; Bier, V.M.; Bley, D.C.
1989-01-01
In the quantitative assessment of seismic risk, uncertainty in the fragility of a structural component is usually expressed by putting forth a family of fragility curves, with probability serving as the parameter of the family. Commonly, a lognormal shape is used both for the individual curves and for the expression of uncertainty over the family. A so-called composite single curve can also be drawn and used for purposes of approximation. This composite curve is often regarded as equivalent to the mean curve of the family. The equality seems intuitively reasonable, but according to the authors has never been proven. The paper presented proves this equivalence hypothesis mathematically. Moreover, the authors show that this equivalence hypothesis between fragility curves is itself equivalent to an identity property of the standard normal probability curve. Thus, in the course of proving the fragility curve hypothesis, the authors have also proved a rather obscure, but interesting and perhaps previously unrecognized, property of the standard normal curve
Observable Zitterbewegung in curved spacetimes
Kobakhidze, Archil; Manning, Adrian; Tureanu, Anca
2016-06-01
Zitterbewegung, as it was originally described by Schrödinger, is an unphysical, non-observable effect. We verify whether the effect can be observed in non-inertial reference frames/curved spacetimes, where the ambiguity in defining particle states results in a mixing of positive and negative frequency modes. We explicitly demonstrate that such a mixing is in fact necessary to obtain the correct classical value for a particle's velocity in a uniformly accelerated reference frame, whereas in cosmological spacetime a particle does indeed exhibit Zitterbewegung.
Observable Zitterbewegung in curved spacetimes
Energy Technology Data Exchange (ETDEWEB)
Kobakhidze, Archil, E-mail: archilk@physics.usyd.edu.au [ARC Centre of Excellence for Particle Physics at the Terascale, School of Physics, The University of Sydney, NSW 2006 (Australia); Manning, Adrian, E-mail: a.manning@physics.usyd.edu.au [ARC Centre of Excellence for Particle Physics at the Terascale, School of Physics, The University of Sydney, NSW 2006 (Australia); Tureanu, Anca, E-mail: anca.tureanu@helsinki.fi [Department of Physics, University of Helsinki, P.O. Box 64, 00014 Helsinki (Finland)
2016-06-10
Zitterbewegung, as it was originally described by Schrödinger, is an unphysical, non-observable effect. We verify whether the effect can be observed in non-inertial reference frames/curved spacetimes, where the ambiguity in defining particle states results in a mixing of positive and negative frequency modes. We explicitly demonstrate that such a mixing is in fact necessary to obtain the correct classical value for a particle's velocity in a uniformly accelerated reference frame, whereas in cosmological spacetime a particle does indeed exhibit Zitterbewegung.
Differential geometry curves, surfaces, manifolds
Kohnel, Wolfgang
2002-01-01
This carefully written book is an introduction to the beautiful ideas and results of differential geometry. The first half covers the geometry of curves and surfaces, which provide much of the motivation and intuition for the general theory. Special topics that are explored include Frenet frames, ruled surfaces, minimal surfaces and the Gauss-Bonnet theorem. The second part is an introduction to the geometry of general manifolds, with particular emphasis on connections and curvature. The final two chapters are insightful examinations of the special cases of spaces of constant curvature and Einstein manifolds. The text is illustrated with many figures and examples. The prerequisites are undergraduate analysis and linear algebra.
LINS Curve in Romanian Economy
Directory of Open Access Journals (Sweden)
Emilian Dobrescu
2016-02-01
Full Text Available The paper presents theoretical considerations and empirical evidence to test the validity of the Laffer in Narrower Sense (LINS curve as a parabola with a maximum. Attention is focused on the so-called legal-effective tax gap (letg. The econometric application is based on statistical data (1990-2013 for Romania as an emerging European economy. Three cointegrating regressions (fully modified least squares, canonical cointegrating regression and dynamic least squares and three algorithms, which are based on instrumental variables (two-stage least squares, generalized method of moments, and limited information maximum likelihood, are involved.
Differential geometry and topology of curves
Animov, Yu
2001-01-01
Differential geometry is an actively developing area of modern mathematics. This volume presents a classical approach to the general topics of the geometry of curves, including the theory of curves in n-dimensional Euclidean space. The author investigates problems for special classes of curves and gives the working method used to obtain the conditions for closed polygonal curves. The proof of the Bakel-Werner theorem in conditions of boundedness for curves with periodic curvature and torsion is also presented. This volume also highlights the contributions made by great geometers. past and present, to differential geometry and the topology of curves.
world system theory and keynesian macroeconomics
African Journals Online (AJOL)
Administrateur
In situations of 'wrong consciousness', it has ... of increasingly satisfying mass needs-which is a social reformist and .... model on which I have been working for some 30 years (Elsenhans ... of investment goods, or charge prices at which profit rates in ...... less to the availability of basic wage goods such as food, than to the.
Flow characteristics of curved ducts
Directory of Open Access Journals (Sweden)
Rudolf P.
2007-10-01
Full Text Available Curved channels are very often present in real hydraulic systems, e.g. curved diffusers of hydraulic turbines, S-shaped bulb turbines, fittings, etc. Curvature brings change of velocity profile, generation of vortices and production of hydraulic losses. Flow simulation using CFD techniques were performed to understand these phenomena. Cases ranging from single elbow to coupled elbows in shapes of U, S and spatial right angle position with circular cross-section were modeled for Re = 60000. Spatial development of the flow was studied and consequently it was deduced that minor losses are connected with the transformation of pressure energy into kinetic energy and vice versa. This transformation is a dissipative process and is reflected in the amount of the energy irreversibly lost. Least loss coefficient is connected with flow in U-shape elbows, biggest one with flow in Sshape elbows. Finally, the extent of the flow domain influenced by presence of curvature was examined. This isimportant for proper placement of mano- and flowmeters during experimental tests. Simulations were verified with experimental results presented in literature.
Improved capacitive melting curve measurements
International Nuclear Information System (INIS)
Sebedash, Alexander; Tuoriniemi, Juha; Pentti, Elias; Salmela, Anssi
2009-01-01
Sensitivity of the capacitive method for determining the melting pressure of helium can be enhanced by loading the empty side of the capacitor with helium at a pressure nearly equal to that desired to be measured and by using a relatively thin and flexible membrane in between. This way one can achieve a nanobar resolution at the level of 30 bar, which is two orders of magnitude better than that of the best gauges with vacuum reference. This extends the applicability of melting curve thermometry to lower temperatures and would allow detecting tiny anomalies in the melting pressure, which must be associated with any phenomena contributing to the entropy of the liquid or solid phases. We demonstrated this principle in measurements of the crystallization pressure of isotopic helium mixtures at millikelvin temperatures by using partly solid pure 4 He as the reference substance providing the best possible universal reference pressure. The achieved sensitivity was good enough for melting curve thermometry on mixtures down to 100 μK. Similar system can be used on pure isotopes by virtue of a blocked capillary giving a stable reference condition with liquid slightly below the melting pressure in the reference volume. This was tested with pure 4 He at temperatures 0.08-0.3 K. To avoid spurious heating effects, one must carefully choose and arrange any dielectric materials close to the active capacitor. We observed some 100 pW loading at moderate excitation voltages.
Classical optics and curved spaces
International Nuclear Information System (INIS)
Bailyn, M.; Ragusa, S.
1976-01-01
In the eikonal approximation of classical optics, the unit polarization 3-vector of light satisfies an equation that depends only on the index, n, of refraction. It is known that if the original 3-space line element is d sigma 2 , then this polarization direction propagates parallely in the fictitious space n 2 d sigma 2 . Since the equation depends only on n, it is possible to invent a fictitious curved 4-space in which the light performs a null geodesic, and the polarization 3-vector behaves as the 'shadow' of a parallely propagated 4-vector. The inverse, namely, the reduction of Maxwell's equation, on a curve 'dielectric free) space, to a classical space with dielectric constant n=(-g 00 ) -1 / 2 is well known, but in the latter the dielectric constant epsilon and permeability μ must also equal (-g 00 ) -1 / 2 . The rotation of polarization as light bends around the sun by utilizing the reduction to the classical space, is calculated. This (non-) rotation may then be interpreted as parallel transport in the 3-space n 2 d sigma 2 [pt
2002-01-01
The Atlas of Stress-Strain Curves, Second Edition is substantially bigger in page dimensions, number of pages, and total number of curves than the previous edition. It contains over 1,400 curves, almost three times as many as in the 1987 edition. The curves are normalized in appearance to aid making comparisons among materials. All diagrams include metric (SI) units, and many also include U.S. customary units. All curves are captioned in a consistent format with valuable information including (as available) standard designation, the primary source of the curve, mechanical properties (including hardening exponent and strength coefficient), condition of sample, strain rate, test temperature, and alloy composition. Curve types include monotonic and cyclic stress-strain, isochronous stress-strain, and tangent modulus. Curves are logically arranged and indexed for fast retrieval of information. The book also includes an introduction that provides background information on methods of stress-strain determination, on...
Transition curves for highway geometric design
Kobryń, Andrzej
2017-01-01
This book provides concise descriptions of the various solutions of transition curves, which can be used in geometric design of roads and highways. It presents mathematical methods and curvature functions for defining transition curves. .
Comparison and evaluation of mathematical lactation curve ...
African Journals Online (AJOL)
p2492989
A mathematical model of the lactation curve provides summary information about culling and milking strategies ..... Table 2 Statistics of the edited data for first lactation Holstein cows ..... Application of different models to the lactation curves of.
Institute of Scientific and Technical Information of China (English)
陈达飞; 贾璐熙
2015-01-01
Based on post -Keynesian endogenous money theory,the study brings together about the“neutrality”and “non -neutrality”of money and “endogeneity”and “exogeneity”of money under one structure in order to explore an endogenous logic of operation of monetary policy.Adopting from the first quarter of 2001 to the third quarter of 2013,by constructing simultaneous equation model and co -integration analysis,and using systematic estimation method,the study analyze the short -run and long -run effect of monetary policy and the origin of endogenous money creation process.The empirical results show that,M2 is neutral to nominal GDP growth both in the short -run and the long-run;M2 strengthens the vibration of CPI in the short -run but in the long -run,no common trend is obvious;deposit has the same long -run trend with M2 and in the short -run,the significant positive relationship between them can't be changed when control variables are added and structure break are considered;loan and deposit share a common trend in the long run and the explanatory power of loan to deposit is significant and stable in the short term.The four conclusions above can give some suggestions to monetary authorities.%文章以后凯恩斯主义货币内生论为理论依据，将货币“中性”与“非中性”之争和“内生”与“外生”之争纳入到一个框架下进行研究，以探求货币政策操作的“内生”逻辑。采用我国2001年第1季度至2013年第3季度的季度数据，构建联立方程模型，运用协整检验和系统估计方法分别考察货币政策操作的短期和长期效果以及货币内生创造机制的根源。实证结果表明，M2对名义 GDP 增长短期和长期均呈现中性；M2短期内会加剧 CPI 的波动率，但长期内和 CPI 增长率没有共同的趋势；存款与 M2有共同的长期趋势，短期内二者呈现显著的正相关性而且显著性不会随着结构变化、滞后项和控制变量的加
Ait-Haddou, Rachid; Sakane, Yusuke; Nomura, Taishin
2013-01-01
We show that the generalized Bernstein bases in Müntz spaces defined by Hirschman and Widder (1949) and extended by Gelfond (1950) can be obtained as pointwise limits of the Chebyshev–Bernstein bases in Müntz spaces with respect to an interval [a,1][a,1] as the positive real number a converges to zero. Such a realization allows for concepts of curve design such as de Casteljau algorithm, blossom, dimension elevation to be transferred from the general theory of Chebyshev blossoms in Müntz spaces to these generalized Bernstein bases that we termed here as Gelfond–Bernstein bases. The advantage of working with Gelfond–Bernstein bases lies in the simplicity of the obtained concepts and algorithms as compared to their Chebyshev–Bernstein bases counterparts.
Bubble Collision in Curved Spacetime
International Nuclear Information System (INIS)
Hwang, Dong-il; Lee, Bum-Hoon; Lee, Wonwoo; Yeom, Dong-han
2014-01-01
We study vacuum bubble collisions in curved spacetime, in which vacuum bubbles were nucleated in the initial metastable vacuum state by quantum tunneling. The bubbles materialize randomly at different times and then start to grow. It is known that the percolation by true vacuum bubbles is not possible due to the exponential expansion of the space among the bubbles. In this paper, we consider two bubbles of the same size with a preferred axis and assume that two bubbles form very near each other to collide. The two bubbles have the same field value. When the bubbles collide, the collided region oscillates back-and-forth and then the collided region eventually decays and disappears. We discuss radiation and gravitational wave resulting from the collision of two bubbles
Bacterial streamers in curved microchannels
Rusconi, Roberto; Lecuyer, Sigolene; Guglielmini, Laura; Stone, Howard
2009-11-01
Biofilms, generally identified as microbial communities embedded in a self-produced matrix of extracellular polymeric substances, are involved in a wide variety of health-related problems ranging from implant-associated infections to disease transmissions and dental plaque. The usual picture of these bacterial films is that they grow and develop on surfaces. However, suspended biofilm structures, or streamers, have been found in natural environments (e.g., rivers, acid mines, hydrothermal hot springs) and are always suggested to stem from a turbulent flow. We report the formation of bacterial streamers in curved microfluidic channels. By using confocal laser microscopy we are able to directly image and characterize the spatial and temporal evolution of these filamentous structures. Such streamers, which always connect the inner corners of opposite sides of the channel, are always located in the middle plane. Numerical simulations of the flow provide evidences for an underlying hydrodynamic mechanism behind the formation of the streamers.
Ait-Haddou, Rachid
2013-02-01
We show that the generalized Bernstein bases in Müntz spaces defined by Hirschman and Widder (1949) and extended by Gelfond (1950) can be obtained as pointwise limits of the Chebyshev–Bernstein bases in Müntz spaces with respect to an interval [a,1][a,1] as the positive real number a converges to zero. Such a realization allows for concepts of curve design such as de Casteljau algorithm, blossom, dimension elevation to be transferred from the general theory of Chebyshev blossoms in Müntz spaces to these generalized Bernstein bases that we termed here as Gelfond–Bernstein bases. The advantage of working with Gelfond–Bernstein bases lies in the simplicity of the obtained concepts and algorithms as compared to their Chebyshev–Bernstein bases counterparts.
Sibling curves of quadratic polynomials | Wiggins | Quaestiones ...
African Journals Online (AJOL)
Sibling curves were demonstrated in [1, 2] as a novel way to visualize the zeroes of real valued functions. In [3] it was shown that a polynomial of degree n has n sibling curves. This paper focuses on the algebraic and geometric properites of the sibling curves of real and complex quadratic polynomials. Key words: Quadratic ...
GLOBAL AND STRICT CURVE FITTING METHOD
Nakajima, Y.; Mori, S.
2004-01-01
To find a global and smooth curve fitting, cubic BSpline method and gathering line methods are investigated. When segmenting and recognizing a contour curve of character shape, some global method is required. If we want to connect contour curves around a singular point like crossing points,
Trigonometric Characterization of Some Plane Curves
Indian Academy of Sciences (India)
IAS Admin
(Figure 1). A relation between tan θ and tanψ gives the trigonometric equation of the family of curves. In this article, trigonometric equations of some known plane curves are deduced and it is shown that these equations reveal some geometric characteristics of the families of the curves under consideration. In Section 2,.
M-curves and symmetric products
Indian Academy of Sciences (India)
Indranil Biswas
2017-08-03
Aug 3, 2017 ... is bounded above by g + 1, where g is the genus of X [11]. Curves which have exactly the maximum number (i.e., genus +1) of components of the real part are called M-curves. Classifying real algebraic curves up to homeomorphism is straightforward, however, classifying even planar non-singular real ...
Holomorphic curves in exploded manifolds: Kuranishi structure
Parker, Brett
2013-01-01
This paper constructs a Kuranishi structure for the moduli stack of holomorphic curves in exploded manifolds. To avoid some technicalities of abstract Kuranishi structures, we embed our Kuranishi structure inside a moduli stack of curves. The construction also works for the moduli stack of holomorphic curves in any compact symplectic manifold.
Automated Blazar Light Curves Using Machine Learning
Energy Technology Data Exchange (ETDEWEB)
Johnson, Spencer James [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
2017-07-27
This presentation describes a problem and methodology pertaining to automated blazar light curves. Namely, optical variability patterns for blazars require the construction of light curves and in order to generate the light curves, data must be filtered before processing to ensure quality.
Method of construction spatial transition curve
Directory of Open Access Journals (Sweden)
S.V. Didanov
2013-04-01
Full Text Available Purpose. The movement of rail transport (speed rolling stock, traffic safety, etc. is largely dependent on the quality of the track. In this case, a special role is the transition curve, which ensures smooth insertion of the transition from linear to circular section of road. The article deals with modeling of spatial transition curve based on the parabolic distribution of the curvature and torsion. This is a continuation of research conducted by the authors regarding the spatial modeling of curved contours. Methodology. Construction of the spatial transition curve is numerical methods for solving nonlinear integral equations, where the initial data are taken coordinate the starting and ending points of the curve of the future, and the inclination of the tangent and the deviation of the curve from the tangent plane at these points. System solutions for the numerical method are the partial derivatives of the equations of the unknown parameters of the law of change of torsion and length of the transition curve. Findings. The parametric equations of the spatial transition curve are calculated by finding the unknown coefficients of the parabolic distribution of the curvature and torsion, as well as the spatial length of the transition curve. Originality. A method for constructing the spatial transition curve is devised, and based on this software geometric modeling spatial transition curves of railway track with specified deviations of the curve from the tangent plane. Practical value. The resulting curve can be applied in any sector of the economy, where it is necessary to ensure a smooth transition from linear to circular section of the curved space bypass. An example is the transition curve in the construction of the railway line, road, pipe, profile, flat section of the working blades of the turbine and compressor, the ship, plane, car, etc.
Power forward curves: a managerial perspective
International Nuclear Information System (INIS)
Nagarajan, Shankar
1999-01-01
This chapter concentrates on managerial application of power forward curves, and examines the determinants of electricity prices such as transmission constraints, its inability to be stored in a conventional way, its seasonality and weather dependence, the generation stack, and the swing risk. The electricity forward curve, classical arbitrage, constructing a forward curve, volatilities, and electricity forward curve models such as the jump-diffusion model, the mean-reverting heteroscedastic volatility model, and an econometric model of forward prices are examined. A managerial perspective of the applications of the forward curve is presented covering plant valuation, capital budgeting, performance measurement, product pricing and structuring, asset optimisation, valuation of transmission options, and risk management
Retrograde curves of solidus and solubility
International Nuclear Information System (INIS)
Vasil'ev, M.V.
1979-01-01
The investigation was concerned with the constitutional diagrams of the eutectic type with ''retrograde solidus'' and ''retrograde solubility curve'' which must be considered as diagrams with degenerate monotectic transformation. The solidus and the solubility curves form a retrograde curve with a common retrograde point representing the solubility maximum. The two branches of the Aetrograde curve can be described with the aid of two similar equations. Presented are corresponding equations for the Cd-Zn system and shown is the possibility of predicting the run of the solubility curve
The writhe of open and closed curves
International Nuclear Information System (INIS)
Berger, Mitchell A; Prior, Chris
2006-01-01
Twist and writhe measure basic geometric properties of a ribbon or tube. While these measures have applications in molecular biology, materials science, fluid mechanics and astrophysics, they are under-utilized because they are often considered difficult to compute. In addition, many applications involve curves with endpoints (open curves); but for these curves the definition of writhe can be ambiguous. This paper provides simple expressions for the writhe of closed curves, and provides a new definition of writhe for open curves. The open curve definition is especially appropriate when the curve is anchored at endpoints on a plane or stretches between two parallel planes. This definition can be especially useful for magnetic flux tubes in the solar atmosphere, and for isotropic rods with ends fixed to a plane
Path integrals on curved manifolds
International Nuclear Information System (INIS)
Grosche, C.; Steiner, F.
1987-01-01
A general framework for treating path integrals on curved manifolds is presented. We also show how to perform general coordinate and space-time transformations in path integrals. The main result is that one has to subtract a quantum correction ΔV ∝ ℎ 2 from the classical Lagrangian L, i.e. the correct effective Lagrangian to be used in the path integral is L eff = L-ΔV. A general prescription for calculating the quantum correction ΔV is given. It is based on a canonical approach using Weyl-ordering and the Hamiltonian path integral defined by the midpoint prescription. The general framework is illustrated by several examples: The d-dimensional rotator, i.e. the motion on the sphere S d-1 , the path integral in d-dimensional polar coordinates, the exact treatment of the hydrogen atom in R 2 and R 3 by performing a Kustaanheimo-Stiefel transformation, the Langer transformation and the path integral for the Morse potential. (orig.)
Page curves for tripartite systems
International Nuclear Information System (INIS)
Hwang, Junha; Lee, Deok Sang; Nho, Dongju; Oh, Jeonghun; Park, Hyosub; Zoe, Heeseung; Yeom, Dong-han
2017-01-01
We investigate information flow and Page curves for tripartite systems. We prepare a tripartite system (say, A , B , and C ) of a given number of states and calculate information and entropy contents by assuming random states. Initially, every particle was in A (this means a black hole), and as time goes on, particles move to either B (this means Hawking radiation) or C (this means a broadly defined remnant, including a non-local transport of information, the last burst, an interior large volume, or a bubble universe, etc). If the final number of states of the remnant is smaller than that of Hawking radiation, then information will be stored by both the radiation and the mutual information between the radiation and the remnant, while the remnant itself does not contain information. On the other hand, if the final number of states of the remnant is greater than that of Hawking radiation, then the radiation contains negligible information, while the remnant and the mutual information between the radiation and the remnant contain information. Unless the number of states of the remnant is large enough compared to the entropy of the black hole, Hawking radiation must contain information; and we meet the menace of black hole complementarity again. Therefore, this contrasts the tension between various assumptions and candidates of the resolution of the information loss problem. (paper)
Vacuum polarization in curved spacetime
International Nuclear Information System (INIS)
Guy, R.W.
1979-01-01
A necessary step in the process of understanding the quantum theory of gravity is the calculation of the stress-energy tensor of quantized fields in curved space-times. The determination of the stress tensor, a formally divergent object, is made possible in this dissertation by utilizing the zeta-function method of regularization and renormalization. By employing this scheme's representation of the renormalized effective action functional, an expression of the stress tensor for a massless, conformally invariant scalar field, first given by DeWitt, is derived. The form of the renormalized stress tensor is first tested in various examples of flat space-times. It is shown to vanish in Minkowski space and to yield the accepted value of the energy density in the Casimir effect. Next, the stress tensor is calculated in two space-times of constant curvature, the Einstein universe and the deSitter universe, and the results are shown to agree with those given by an expression of the stress tensor that is valid in conformally flat space-times. This work culminates in the determination of the stress tensor on the horizon of a Schwarzschild black hole. This is accomplished by approximating the radial part of the eigen-functions and the metric in the vicinity of the horizon. The stress tensor at this level approximation is found to be pure trace. The approximated forms of the Schwarzschild metric describes a conformally flat space-time that possesses horizons
Consistent Valuation across Curves Using Pricing Kernels
Directory of Open Access Journals (Sweden)
Andrea Macrina
2018-03-01
Full Text Available The general problem of asset pricing when the discount rate differs from the rate at which an asset’s cash flows accrue is considered. A pricing kernel framework is used to model an economy that is segmented into distinct markets, each identified by a yield curve having its own market, credit and liquidity risk characteristics. The proposed framework precludes arbitrage within each market, while the definition of a curve-conversion factor process links all markets in a consistent arbitrage-free manner. A pricing formula is then derived, referred to as the across-curve pricing formula, which enables consistent valuation and hedging of financial instruments across curves (and markets. As a natural application, a consistent multi-curve framework is formulated for emerging and developed inter-bank swap markets, which highlights an important dual feature of the curve-conversion factor process. Given this multi-curve framework, existing multi-curve approaches based on HJM and rational pricing kernel models are recovered, reviewed and generalised and single-curve models extended. In another application, inflation-linked, currency-based and fixed-income hybrid securities are shown to be consistently valued using the across-curve valuation method.
Construction of calibration curve for accountancy tank
International Nuclear Information System (INIS)
Kato, Takayuki; Goto, Yoshiki; Nidaira, Kazuo
2009-01-01
Tanks are equipped in a reprocessing plant for accounting solution of nuclear material. The careful measurement of volume in tanks is very important to implement rigorous accounting of nuclear material. The calibration curve relating the volume and level of solution needs to be constructed, where the level is determined by differential pressure of dip tubes. Several calibration curves are usually employed, but it's not explicitly decided how many segment are used, where to select segment, or what should be the degree of polynomial curve. These parameters, i.e., segment and degree of polynomial curve are mutually interrelated to give the better performance of calibration curve. Here we present the construction technique of giving optimum calibration curves and their characteristics. (author)
MICA: Multiple interval-based curve alignment
Mann, Martin; Kahle, Hans-Peter; Beck, Matthias; Bender, Bela Johannes; Spiecker, Heinrich; Backofen, Rolf
2018-01-01
MICA enables the automatic synchronization of discrete data curves. To this end, characteristic points of the curves' shapes are identified. These landmarks are used within a heuristic curve registration approach to align profile pairs by mapping similar characteristics onto each other. In combination with a progressive alignment scheme, this enables the computation of multiple curve alignments. Multiple curve alignments are needed to derive meaningful representative consensus data of measured time or data series. MICA was already successfully applied to generate representative profiles of tree growth data based on intra-annual wood density profiles or cell formation data. The MICA package provides a command-line and graphical user interface. The R interface enables the direct embedding of multiple curve alignment computation into larger analyses pipelines. Source code, binaries and documentation are freely available at https://github.com/BackofenLab/MICA
Inverse Diffusion Curves Using Shape Optimization.
Zhao, Shuang; Durand, Fredo; Zheng, Changxi
2018-07-01
The inverse diffusion curve problem focuses on automatic creation of diffusion curve images that resemble user provided color fields. This problem is challenging since the 1D curves have a nonlinear and global impact on resulting color fields via a partial differential equation (PDE). We introduce a new approach complementary to previous methods by optimizing curve geometry. In particular, we propose a novel iterative algorithm based on the theory of shape derivatives. The resulting diffusion curves are clean and well-shaped, and the final image closely approximates the input. Our method provides a user-controlled parameter to regularize curve complexity, and generalizes to handle input color fields represented in a variety of formats.
String Sigma Models on Curved Supermanifolds
Directory of Open Access Journals (Sweden)
Roberto Catenacci
2018-04-01
Full Text Available We use the techniques of integral forms to analyze the easiest example of two-dimensional sigma models on a supermanifold. We write the action as an integral of a top integral form over a D = 2 supermanifold, and we show how to interpolate between different superspace actions. Then, we consider curved supermanifolds, and we show that the definitions used for flat supermanifolds can also be used for curved supermanifolds. We prove it by first considering the case of a curved rigid supermanifold and then the case of a generic curved supermanifold described by a single superfield E.
Regional Marginal Abatement Cost Curves for NOx
U.S. Environmental Protection Agency — Data underlying the figures included in the manuscript "Marginal abatement cost curve for NOx incorporating controls, renewable electricity, energy efficiency and...
Hong Shen
2011-01-01
The concepts of curve profile, curve intercept, curve intercept density, curve profile area density, intersection density in containing intersection (or intersection density relied on intersection reference), curve profile intersection density in surface (or curve intercept intersection density relied on intersection of containing curve), and curve profile area density in surface (AS) were defined. AS expressed the amount of curve profile area of Y phase in the unit containing surface area, S...
Polar representation of centrifugal pump homologous curves
International Nuclear Information System (INIS)
Veloso, Marcelo Antonio; Mattos, Joao Roberto Loureiro de
2008-01-01
Essential for any mathematical model designed to simulate flow transient events caused by pump operations is the pump performance data. The performance of a centrifugal pump is characterized by four basic parameters: the rotational speed, the volumetric flow rate, the dynamic head, and the hydraulic torque. Any one of these quantities can be expressed as a function of any two others. The curves showing the relationships between these four variables are called the pump characteristic curves, also referred to as four-quadrant curves. The characteristic curves are empirically developed by the pump manufacturer and uniquely describe head and torque as functions of volumetric flow rate and rotation speed. Because of comprising a large amount of points, the four-quadrant configuration is not suitable for computational purposes. However, it can be converted to a simpler form by the development of the homologous curves, in which dynamic head and hydraulic torque ratios are expressed as functions of volumetric flow and rotation speed ratios. The numerical use of the complete set of homologous curves requires specification of sixteen partial curves, being eight for the dynamic head and eight for the hydraulic torque. As a consequence, the handling of homologous curves is still somewhat complicated. In solving flow transient problems that require the pump characteristic data for all the operation zones, the polar form appears as the simplest way to represent the homologous curves. In the polar method, the complete characteristics of a pump can be described by only two closed curves, one for the dynamic head and other for the hydraulic torque, both in function of a single angular coordinate defined adequately in terms of the quotient between volumetric flow ratio and rotation speed ratio. The usefulness and advantages of this alternative method are demonstrated through a practical example in which the homologous curves for a pump of the type used in the main coolant loops of a
Zheng, WeiKang; Kelly, Patrick L.; Filippenko, Alexei V.
2018-05-01
We examine the relationship between three parameters of Type Ia supernovae (SNe Ia): peak magnitude, rise time, and photospheric velocity at the time of peak brightness. The peak magnitude is corrected for extinction using an estimate determined from MLCS2k2 fitting. The rise time is measured from the well-observed B-band light curve with the first detection at least 1 mag fainter than the peak magnitude, and the photospheric velocity is measured from the strong absorption feature of Si II λ6355 at the time of peak brightness. We model the relationship among these three parameters using an expanding fireball with two assumptions: (a) the optical emission is approximately that of a blackbody, and (b) the photospheric temperatures of all SNe Ia are the same at the time of peak brightness. We compare the precision of the distance residuals inferred using this physically motivated model against those from the empirical Phillips relation and the MLCS2k2 method for 47 low-redshift SNe Ia (0.005 Ia in our sample with higher velocities are inferred to be intrinsically fainter. Eliminating the high-velocity SNe and applying a more stringent extinction cut to obtain a “low-v golden sample” of 22 SNe, we obtain significantly reduced scatter of 0.108 ± 0.018 mag in the new relation, better than those of the Phillips relation and the MLCS2k2 method. For 250 km s‑1 of residual peculiar motions, we find 68% and 95% upper limits on the intrinsic scatter of 0.07 and 0.10 mag, respectively.
Migration and the Wage-Settings Curve
DEFF Research Database (Denmark)
Brücker, Herbert; Jahn, Elke
Germany on basis of a wage-setting curve. The wage-setting curve relies on the assumption that wages respond to a hange in the unemployment rate, albeit imperfectly. This allows one to derive the wage and employment effects of migration simultaneously in a general equilibrium framework. Using...
Learning curves in energy planning models
Energy Technology Data Exchange (ETDEWEB)
Barreto, L; Kypreos, S [Paul Scherrer Inst. (PSI), Villigen (Switzerland)
1999-08-01
This study describes the endogenous representation of investment cost learning curves into the MARKAL energy planning model. A piece-wise representation of the learning curves is implemented using Mixed Integer Programming. The approach is briefly described and some results are presented. (author) 3 figs., 5 refs.
The Koch curve as a smooth manifold
International Nuclear Information System (INIS)
Epstein, Marcelo; Sniatycki, Jedrzej
2008-01-01
We show that there exists a homeomorphism between the closed interval [0,1] is contained in R and the Koch curve endowed with the subset topology of R 2 . We use this homeomorphism to endow the Koch curve with the structure of a smooth manifold with boundary
International Nuclear Information System (INIS)
Bershadsky, M.; Radul, A.
1988-01-01
The line bundles of degree g-1 on Z N -curves corresponding to 1/N nonsingular characteristics are considered. The determinants of Dirac operators defined on these line bundles are evaluated in terms of branch points. The generalization of Thomae's formula for Z N -curves is derived. (orig.)
Measuring Model Rocket Engine Thrust Curves
Penn, Kim; Slaton, William V.
2010-01-01
This paper describes a method and setup to quickly and easily measure a model rocket engine's thrust curve using a computer data logger and force probe. Horst describes using Vernier's LabPro and force probe to measure the rocket engine's thrust curve; however, the method of attaching the rocket to the force probe is not discussed. We show how a…
A minicourse on moduli of curves
International Nuclear Information System (INIS)
Looijenga, E.
2000-01-01
These are notes that accompany a short course given at the School on Algebraic Geometry 1999 at the ICTP, Trieste. A major goal is to outline various approaches to moduli spaces of curves. In the last part I discuss the algebraic classes that naturally live on these spaces; these can be thought of as the characteristic classes for bundles of curves. (author)
Minimal families of curves on surfaces
Lubbes, Niels
2014-01-01
A minimal family of curves on an embedded surface is defined as a 1-dimensional family of rational curves of minimal degree, which cover the surface. We classify such minimal families using constructive methods. This allows us to compute the minimal
Symmetry Properties of Potentiometric Titration Curves.
Macca, Carlo; Bombi, G. Giorgio
1983-01-01
Demonstrates how the symmetry properties of titration curves can be efficiently and rigorously treated by means of a simple method, assisted by the use of logarithmic diagrams. Discusses the symmetry properties of several typical titration curves, comparing the graphical approach and an explicit mathematical treatment. (Author/JM)
Deep-learnt classification of light curves
DEFF Research Database (Denmark)
Mahabal, Ashish; Gieseke, Fabian; Pai, Akshay Sadananda Uppinakudru
2017-01-01
Astronomy light curves are sparse, gappy, and heteroscedastic. As a result standard time series methods regularly used for financial and similar datasets are of little help and astronomers are usually left to their own instruments and techniques to classify light curves. A common approach is to d...
Hyper-and-elliptic-curve cryptography
Bernstein, D.J.; Lange, T.
2014-01-01
This paper introduces ‘hyper-and-elliptic-curve cryptography’, in which a single high-security group supports fast genus-2-hyperelliptic-curve formulas for variable-base-point single-scalar multiplication (for example, Diffie–Hellman shared-secret computation) and at the same time supports fast
Curve Matching with Applications in Medical Imaging
DEFF Research Database (Denmark)
Bauer, Martin; Bruveris, Martins; Harms, Philipp
2015-01-01
In the recent years, Riemannian shape analysis of curves and surfaces has found several applications in medical image analysis. In this paper we present a numerical discretization of second order Sobolev metrics on the space of regular curves in Euclidean space. This class of metrics has several...
Remote sensing used for power curves
International Nuclear Information System (INIS)
Wagner, R; Joergensen, H E; Paulsen, U S; Larsen, T J; Antoniou, I; Thesbjerg, L
2008-01-01
Power curve measurement for large wind turbines requires taking into account more parameters than only the wind speed at hub height. Based on results from aerodynamic simulations, an equivalent wind speed taking the wind shear into account was defined and found to reduce the power standard deviation in the power curve significantly. Two LiDARs and a SoDAR are used to measure the wind profile in front of a wind turbine. These profiles are used to calculate the equivalent wind speed. The comparison of the power curves obtained with the three instruments to the traditional power curve, obtained using a cup anemometer measurement, confirms the results obtained from the simulations. Using LiDAR profiles reduces the error in power curve measurement, when these are used as relative instrument together with a cup anemometer. Results from the SoDAR do not show such promising results, probably because of noisy measurements resulting in distorted profiles
Parametric representation of centrifugal pump homologous curves
International Nuclear Information System (INIS)
Veloso, Marcelo A.; Mattos, Joao R.L. de
2015-01-01
Essential for any mathematical model designed to simulate flow transient events caused by pump operations is the pump performance data. The performance of a centrifugal pump is characterized by four basic quantities: the rotational speed, the volumetric flow rate, the dynamic head, and the hydraulic torque. The curves showing the relationships between these four variables are called the pump characteristic curves. The characteristic curves are empirically developed by the pump manufacturer and uniquely describe head and torque as functions of volumetric flow rate and rotation speed. Because of comprising a large amount of points, this configuration is not suitable for computational purposes. However, it can be converted to a simpler form by the development of the homologous curves, in which dynamic head and hydraulic torque ratios are expressed as functions of volumetric flow and rotation speed ratios. The numerical use of the complete set of homologous curves requires specification of sixteen partial curves, being eight for the dynamic head and eight for the hydraulic torque. As a consequence, the handling of homologous curves is still somewhat complicated. In solving flow transient problems that require the pump characteristic data for all the operation zones, the parametric form appears as the simplest way to deal with the homologous curves. In this approach, the complete characteristics of a pump can be described by only two closed curves, one for the dynamic head and other for the hydraulic torque, both in function of a single angular coordinate defined adequately in terms of the quotient between volumetric flow ratio and rotation speed ratio. The usefulness and advantages of this alternative method are demonstrated through a practical example in which the homologous curves for a pump of the type used in the main coolant loops of a pressurized water reactor (PWR) are transformed to the parametric form. (author)
Computerised curve deconvolution of TL/OSL curves using a popular spreadsheet program.
Afouxenidis, D; Polymeris, G S; Tsirliganis, N C; Kitis, G
2012-05-01
This paper exploits the possibility of using commercial software for thermoluminescence and optically stimulated luminescence curve deconvolution analysis. The widely used software package Microsoft Excel, with the Solver utility has been used to perform deconvolution analysis to both experimental and reference glow curves resulted from the GLOw Curve ANalysis INtercomparison project. The simple interface of this programme combined with the powerful Solver utility, allows the analysis of complex stimulated luminescence curves into their components and the evaluation of the associated luminescence parameters.
Computerised curve deconvolution of TL/OSL curves using a popular spreadsheet program
International Nuclear Information System (INIS)
Afouxenidis, D.; Polymeris, G. S.; Tsirliganis, N. C.; Kitis, G.
2012-01-01
This paper exploits the possibility of using commercial software for thermoluminescence and optically stimulated luminescence curve deconvolution analysis. The widely used software package Microsoft Excel, with the Solver utility has been used to perform deconvolution analysis to both experimental and reference glow curves resulted from the Glow Curve Analysis Intercomparison project. The simple interface of this programme combined with the powerful Solver utility, allows the analysis of complex stimulated luminescence curves into their components and the evaluation of the associated luminescence parameters. (authors)
Mannheim Partner D-Curves in the Euclidean 3-space
Directory of Open Access Journals (Sweden)
Mustafa Kazaz
2015-02-01
Full Text Available In this paper, we consider the idea of Mannheim partner curves for curves lying on surfaces. By considering the Darboux frames of surface curves, we define Mannheim partner D-curves and give the characterizations for these curves. We also find the relations between geodesic curvatures, normal curvatures and geodesic torsions of these associated curves. Furthermore, we show that definition and characterizations of Mannheim partner D-curves include those of Mannheim partner curves in some special cases.
A versatile curve-fit model for linear to deeply concave rank abundance curves
Neuteboom, J.H.; Struik, P.C.
2005-01-01
A new, flexible curve-fit model for linear to concave rank abundance curves was conceptualized and validated using observational data. The model links the geometric-series model and log-series model and can also fit deeply concave rank abundance curves. The model is based ¿ in an unconventional way
Investigation of learning and experience curves
Energy Technology Data Exchange (ETDEWEB)
Krawiec, F.; Thornton, J.; Edesess, M.
1980-04-01
The applicability of learning and experience curves for predicting future costs of solar technologies is assessed, and the major test case is the production economics of heliostats. Alternative methods for estimating cost reductions in systems manufacture are discussed, and procedures for using learning and experience curves to predict costs are outlined. Because adequate production data often do not exist, production histories of analogous products/processes are analyzed and learning and aggregated cost curves for these surrogates estimated. If the surrogate learning curves apply, they can be used to estimate solar technology costs. The steps involved in generating these cost estimates are given. Second-generation glass-steel and inflated-bubble heliostat design concepts, developed by MDAC and GE, respectively, are described; a costing scenario for 25,000 units/yr is detailed; surrogates for cost analysis are chosen; learning and aggregate cost curves are estimated; and aggregate cost curves for the GE and MDAC designs are estimated. However, an approach that combines a neoclassical production function with a learning-by-doing hypothesis is needed to yield a cost relation compatible with the historical learning curve and the traditional cost function of economic theory.
Modelling curves of manufacturing feasibilities and demand
Directory of Open Access Journals (Sweden)
Soloninko K.S.
2017-03-01
Full Text Available The authors research the issue of functional properties of curves of manufacturing feasibilities and demand. Settlement of the problem, and its connection with important scientific and practical tasks. According to its nature, the market economy is unstable and is in constant movement. Economy has an effective instrument for explanation of changes in economic environment; this tool is called the modelling of economic processes. The modelling of economic processes depends first and foremost on the building of economic model which is the base for the formalization of economic process, that is, the building of mathematical model. The effective means for formalization of economic process is the creation of the model of hypothetic or imaginary economy. The building of demand model is significant for the market of goods and services. The problem includes the receiving (as the result of modelling definite functional properties of curves of manufacturing feasibilities and demand according to which one can determine their mathematical model. Another problem lies in obtaining majorant properties of curves of joint demand on the market of goods and services. Analysis of the latest researches and publications. Many domestic and foreign scientists dedicated their studies to the researches and building of the models of curves of manufacturing feasibilities and demand. In spite of considerable work of the scientists, such problems as functional properties of the curves and their practical use in modelling. The purpose of the article is to describe functional properties of curves of manufacturing feasibilities and demand on the market of goods and services on the base of modelling of their building. Scientific novelty and practical value. The theoretical regulations (for functional properties of curves of manufacturing feasibilities and demand received as a result of the present research, that is convexity, give extra practical possibilities in a microeconomic
Reflected Light Curves of Extrasolar Planets
Green, D.; Matthews, J.; Kuschnig, R.; Seager, S.
The planned launches of ultra-precise photometric satellites such as MOST, COROT and MONS should provide the first opportunity to study the reflected light curves from extrasolar planets. To predict the capabilities of these missions, we have constructed a series of models of such light curves, improving upon the Monte Carlo simulations by Seager et al. (2000). These models include more realistic features such limb darkening of the star and broad band photometry. For specific models, the resulting planet light curves exhibit unique behavior with the variation of radius, inclination and presence or absence of clouds.
Neck curve polynomials in neck rupture model
International Nuclear Information System (INIS)
Kurniadi, Rizal; Perkasa, Yudha S.; Waris, Abdul
2012-01-01
The Neck Rupture Model is a model that explains the scission process which has smallest radius in liquid drop at certain position. Old fashion of rupture position is determined randomly so that has been called as Random Neck Rupture Model (RNRM). The neck curve polynomials have been employed in the Neck Rupture Model for calculation the fission yield of neutron induced fission reaction of 280 X 90 with changing of order of polynomials as well as temperature. The neck curve polynomials approximation shows the important effects in shaping of fission yield curve.
Morse theory on timelike and causal curves
International Nuclear Information System (INIS)
Everson, J.; Talbot, C.J.
1976-01-01
It is shown that the set of timelike curves in a globally hyperbolic space-time manifold can be given the structure of a Hilbert manifold under a suitable definition of 'timelike.' The causal curves are the topological closure of this manifold. The Lorentzian energy (corresponding to Milnor's energy, except that the Lorentzian inner product is used) is shown to be a Morse function for the space of causal curves. A fixed end point index theorem is obtained in which a lower bound for the index of the Hessian of the Lorentzian energy is given in terms of the sum of the orders of the conjugate points between the end points. (author)
Constructing forward price curves in electricity markets
DEFF Research Database (Denmark)
Fleten, S.-E.; Lemming, Jørgen Kjærgaard
2003-01-01
We present and analyze a method for constructing approximated high-resolution forward price curves in electricity markets. Because a limited number of forward or futures contracts are traded in the market, only a limited picture of the theoretical continuous forward price curve is available...... to the analyst. Our method combines the information contained in observed bid and ask prices with information from the forecasts generated by bottom-up models. As an example, we use information concerning the shape of the seasonal variation from a bottom-up model to improve the forward price curve quoted...
Curves of restricted type in euclidean spaces
Directory of Open Access Journals (Sweden)
Bengü Kılıç Bayram
2014-01-01
Full Text Available Submanifolds of restricted type were introduced in [7]. In the present study we consider restricted type of curves in Em. We give some special examples. We also show that spherical curve in S2(r C E3 is of restricted type if and only if either ƒ(s is constant or a linear function of s of the form ƒ(s = ±s + b and every closed W - curve of rank k and of length 2(r in E2k is of restricted type.
Constructing forward price curves in electricity markets
International Nuclear Information System (INIS)
Fleten, Stein-Erik; Lemming, Jacob
2003-01-01
We present and analyze a method for constructing approximated high-resolution forward price curves in electricity markets. Because a limited number of forward or futures contracts are traded in the market, only a limited picture of the theoretical continuous forward price curve is available to the analyst. Our method combines the information contained in observed bid and ask prices with information from the forecasts generated by bottom-up models. As an example, we use information concerning the shape of the seasonal variation from a bottom-up model to improve the forward price curve quoted on the Nordic power exchange
Growth curves for twins in Slovenia.
Bricelj, Katja; Blickstein, Isaac; Bržan-Šimenc, Gabrijela; Janša, Vid; Lučovnik, Miha; Verdenik, Ivan; Trojner-Bregar, Andreja; Tul, Nataša
2017-02-01
Abnormalities of fetal growth are more common in twins. We introduce the growth curves for monitoring fetal growth in twin pregnancies in Slovenia. Slovenian National Perinatal Information System for the period between 2002 and 2010 was used to calculate birth weight percentiles for all live born twins for each week from 22nd to 40th week. The calculated percentiles of birth weight for all live-born twins in Slovenia served as the basis for drawing 'growth' curves. The calculated growth curves for twins will help accurately diagnose small or large twin fetuses for their gestational age in the native central European population.
Wind Turbine Power Curves Incorporating Turbulence Intensity
DEFF Research Database (Denmark)
Sørensen, Emil Hedevang Lohse
2014-01-01
. The model and method are parsimonious in the sense that only a single function (the zero-turbulence power curve) and a single auxiliary parameter (the equivalent turbulence factor) are needed to predict the mean power at any desired turbulence intensity. The method requires only ten minute statistics......The performance of a wind turbine in terms of power production (the power curve) is important to the wind energy industry. The current IEC-61400-12-1 standard for power curve evaluation recognizes only the mean wind speed at hub height and the air density as relevant to the power production...
International Nuclear Information System (INIS)
Pan, Haoran; Koehler, Jonathan
2007-01-01
Learning curves have recently been widely adopted in climate-economy models to incorporate endogenous change of energy technologies, replacing the conventional assumption of an autonomous energy efficiency improvement. However, there has been little consideration of the credibility of the learning curve. The current trend that many important energy and climate change policy analyses rely on the learning curve means that it is of great importance to critically examine the basis for learning curves. Here, we analyse the use of learning curves in energy technology, usually implemented as a simple power function. We find that the learning curve cannot separate the effects of price and technological change, cannot reflect continuous and qualitative change of both conventional and emerging energy technologies, cannot help to determine the time paths of technological investment, and misses the central role of R and D activity in driving technological change. We argue that a logistic curve of improving performance modified to include R and D activity as a driving variable can better describe the cost reductions in energy technologies. Furthermore, we demonstrate that the top-down Leontief technology can incorporate the bottom-up technologies that improve along either the learning curve or the logistic curve, through changing input-output coefficients. An application to UK wind power illustrates that the logistic curve fits the observed data better and implies greater potential for cost reduction than the learning curve does. (author)
A simple Lissajous curves experimental setup
Şahin Kızılcık, Hasan; Damlı, Volkan
2018-05-01
The aim of this study is to develop an experimental setup to produce Lissajous curves. The setup was made using a smartphone, a powered speaker (computer speaker), a balloon, a laser pointer and a piece of mirror. Lissajous curves are formed as follows: a piece of mirror is attached to a balloon. The balloon is vibrated with the sound signal provided by the speaker that is connected to a smartphone. The laser beam is reflected off the mirror and the reflection is shaped as a Lissajous curve. Because of the intersection of two frequencies (frequency of the sound signal and natural vibration frequency of the balloon), these curves are formed. They can be used to measure the ratio of frequencies.
On ``minimally curved spacetimes'' in general relativity
Dadhich, Naresh
1997-01-01
We consider a spacetime corresponding to uniform relativistic potential analogus to Newtonian potential as an example of ``minimally curved spacetime''. We also consider a radially symmetric analogue of the Rindler spacetime of uniform proper acceleration relative to infinity.
Utilization of curve offsets in additive manufacturing
Haseltalab, Vahid; Yaman, Ulas; Dolen, Melik
2018-05-01
Curve offsets are utilized in different fields of engineering and science. Additive manufacturing, which lately becomes an explicit requirement in manufacturing industry, utilizes curve offsets widely. One of the necessities of offsetting is for scaling which is required if there is shrinkage after the fabrication or if the surface quality of the resulting part is unacceptable. Therefore, some post-processing is indispensable. But the major application of curve offsets in additive manufacturing processes is for generating head trajectories. In a point-wise AM process, a correct tool-path in each layer can reduce lots of costs and increase the surface quality of the fabricated parts. In this study, different curve offset generation algorithms are analyzed to show their capabilities and disadvantages through some test cases and improvements on their drawbacks are suggested.
Quaternion orders, quadratic forms, and Shimura curves
Alsina, Montserrat
2004-01-01
Shimura curves are a far-reaching generalization of the classical modular curves. They lie at the crossroads of many areas, including complex analysis, hyperbolic geometry, algebraic geometry, algebra, and arithmetic. The text provides an introduction to the subject from a theoretic and algorithmic perspective. The main topics covered in it are Shimura curves defined over the rational number field, the construction of their fundamental domains, and the determination of their complex multiplication points. The study of complex multiplication points in Shimura curves leads to the study of families of binary quadratic forms with algebraic coefficients and to their classification by arithmetic Fuchsian groups. In this regard, the authors develop a theory full of new possibilities which parallels Gauss' theory on the classification of binary quadratic forms with integral coefficients by the action of the modular group. Each topic covered in the book begins with a theoretical discussion followed by carefully worked...
Uncovering the skewness news impact curve
Czech Academy of Sciences Publication Activity Database
Anatolyev, Stanislav; Petukhov, A.
2016-01-01
Roč. 14, č. 4 (2016), s. 746-771 ISSN 1479-8409 Institutional support: RVO:67985998 Keywords : conditional skewness * news impact curve * stock returns Subject RIV: AH - Economics Impact factor: 1.800, year: 2016
Classification of ASKAP Vast Radio Light Curves
Rebbapragada, Umaa; Lo, Kitty; Wagstaff, Kiri L.; Reed, Colorado; Murphy, Tara; Thompson, David R.
2012-01-01
The VAST survey is a wide-field survey that observes with unprecedented instrument sensitivity (0.5 mJy or lower) and repeat cadence (a goal of 5 seconds) that will enable novel scientific discoveries related to known and unknown classes of radio transients and variables. Given the unprecedented observing characteristics of VAST, it is important to estimate source classification performance, and determine best practices prior to the launch of ASKAP's BETA in 2012. The goal of this study is to identify light curve characterization and classification algorithms that are best suited for archival VAST light curve classification. We perform our experiments on light curve simulations of eight source types and achieve best case performance of approximately 90% accuracy. We note that classification performance is most influenced by light curve characterization rather than classifier algorithm.
Automorphisms of double coverings of curves
International Nuclear Information System (INIS)
Torres, F.
1994-11-01
We study automorphisms of curves that commute with each other. We prove that the order and the number of fixed points of one of them satisfy certain relations involving those of the other. Then, we specialize our results to the case of double coverings of curves. For instance, if the genus of the curve is at least 4γ + 2 and γ >= 1 (γ = the genus of the covered curve) we prove that the order of an automorphism is bounded above by 2γ + 1 (resp. 4γ + 2) provided it is prime (resp. it has at least five fixed points). We also improve Farkas' bound on the number of fixed points namely 4γ + 4 by showing that it involves the order of the automorphism except in the case of even order when such an improvement is obtained provided the automorphism and the γ-involution has at least one common fixed point. (author). 15 refs
Uncovering the skewness news impact curve
Czech Academy of Sciences Publication Activity Database
Anatolyev, Stanislav; Petukhov, A.
2016-01-01
Roč. 14, č. 4 (2016), s. 746-771 ISSN 1479-8409 Institutional support: PRVOUK-P23 Keywords : conditional skewness * news impact curve * stock returns Subject RIV: AH - Economics Impact factor: 1.800, year: 2016
Transmission of wave energy in curved ducts
Rostafinski, W.
1973-01-01
A formation of wave energy flow was developed for motion in curved ducts. A parametric study over a range of frequencies determined the ability of circular bends to transmit energy for the case of perfectly rigid walls.
Twisted Vector Bundles on Pointed Nodal Curves
Indian Academy of Sciences (India)
Abstract. Motivated by the quest for a good compactification of the moduli space of -bundles on a nodal curve we establish a striking relationship between Abramovich's and Vistoli's twisted bundles and Gieseker vector bundles.
Statistics from dynamics in curved spacetime
International Nuclear Information System (INIS)
Parker, L.; Wang, Y.
1989-01-01
We consider quantum fields of spin 0, 1/2, 1, 3/2, and 2 with a nonzero mass in curved spacetime. We show that the dynamical Bogolubov transformations associated with gravitationally induced particle creation imply the connection between spin and statistics: By embedding two flat regions in a curved spacetime, we find that only when one imposes Bose-Einstein statistics for an integer-spin field and Fermi-Dirac statistics for a half-integer-spin field in the first flat region is the same type of statistics propagated from the first to the second flat region. This derivation of the flat-spacetime spin-statistics theorem makes use of curved-spacetime dynamics and does not reduce to any proof given in flat spacetime. We also show in the same manner that parastatistics, up to the fourth order, are consistent with the dynamical evolution of curved spacetime
RMS fatigue curves for random vibrations
International Nuclear Information System (INIS)
Brenneman, B.; Talley, J.G.
1984-01-01
Fatigue usage factors for deterministic or constant amplitude vibration stresses may be calculated with well known procedures and fatigue curves given in the ASME Boiler and Pressure Vessel Code. However, some phenomena produce nondeterministic cyclic stresses which can only be described and analyzed with statistical concepts and methods. Such stresses may be caused by turbulent fluid flow over a structure. Previous methods for solving this statistical fatigue problem are often difficult to use and may yield inaccurate results. Two such methods examined herein are Crandall's method and the ''3sigma'' method. The objective of this paper is to provide a method for creating ''RMS fatigue curves'' which accurately incorporate the requisite statistical information. These curves are given and may be used by analysts with the same ease and in the same manner as the ASME fatigue curves
Neutron cross sections: Book of curves
International Nuclear Information System (INIS)
McLane, V.; Dunford, C.L.; Rose, P.F.
1988-01-01
Neuton Cross Sections: Book of Curves represents the fourth edition of what was previously known as BNL-325, Neutron Cross Sections, Volume 2, CURVES. Data is presented only for (i.e., intergrated) reaction cross sections (and related fission parameters) as a function of incident-neutron energy for the energy range 0.01 eV to 200 MeV. For the first time, isometric state production cross sections have been included. 11 refs., 4 figs
Constructing elliptic curves from Galois representations
Snowden, Andrew; Tsimerman, Jacob
2017-01-01
Given a non-isotrivial elliptic curve over an arithmetic surface, one obtains a lisse $\\ell$-adic sheaf of rank two over the surface. This lisse sheaf has a number of straightforward properties: cyclotomic determinant, finite ramification, rational traces of Frobenius, and somewhere not potentially good reduction. We prove that any lisse sheaf of rank two possessing these properties comes from an elliptic curve.
Curved twistor spaces and H-space
International Nuclear Information System (INIS)
Tod, K.P.
1980-01-01
The curved twistor space construction of Penrose for anti-self-dual solutions to the Einstein vacuum equations is described. Curved twistor spaces are defined and it is shown with the aid of an example how to obtain them by deforming the complex structure of regions of flat twistor space. The connection of this procedure with Newman's H-space construction via asymptotic twistor space is outlined. (Auth.)
Potential Energy Curve of N2 Revisited
Czech Academy of Sciences Publication Activity Database
Špirko, Vladimír; Xiangzhu, L.; Paldus, J.
2011-01-01
Roč. 76, č. 4 (2011), s. 327-341 ISSN 0010-0765 R&D Projects: GA MŠk LC512; GA ČR GAP208/11/0436 Institutional research plan: CEZ:AV0Z40550506 Keywords : reduced multireference coupled-cluster method * reduced potential curve method * nitrogen molecule potential energy curves Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 1.283, year: 2011
Curvature Entropy for Curved Profile Generation
Ujiie, Yoshiki; Kato, Takeo; Sato, Koichiro; Matsuoka, Yoshiyuki
2012-01-01
In a curved surface design, the overall shape features that emerge from combinations of shape elements are important. However, controlling the features of the overall shape in curved profiles is difficult using conventional microscopic shape information such as dimension. Herein two types of macroscopic shape information, curvature entropy and quadrature curvature entropy, quantitatively represent the features of the overall shape. The curvature entropy is calculated by the curvature distribu...
Anomalies in curved spacetime at finite temperature
International Nuclear Information System (INIS)
Boschi-Filho, H.; Natividade, C.P.
1993-01-01
We discuss the problem of the breakdown of conformal and gauge symmetries at finite temperature in curved spacetime background, when the changes in the background are gradual. We obtain the expressions for the Seeley's coefficients and the heat kernel expansion in this regime. As applications, we consider the self-interacting lambda phi''4 and chiral Schwinger models in curved backgrounds at finite temperature. (Author) 9 refs
Learning curves in health professions education.
Pusic, Martin V; Boutis, Kathy; Hatala, Rose; Cook, David A
2015-08-01
Learning curves, which graphically show the relationship between learning effort and achievement, are common in published education research but are not often used in day-to-day educational activities. The purpose of this article is to describe the generation and analysis of learning curves and their applicability to health professions education. The authors argue that the time is right for a closer look at using learning curves-given their desirable properties-to inform both self-directed instruction by individuals and education management by instructors.A typical learning curve is made up of a measure of learning (y-axis), a measure of effort (x-axis), and a mathematical linking function. At the individual level, learning curves make manifest a single person's progress towards competence including his/her rate of learning, the inflection point where learning becomes more effortful, and the remaining distance to mastery attainment. At the group level, overlaid learning curves show the full variation of a group of learners' paths through a given learning domain. Specifically, they make overt the difference between time-based and competency-based approaches to instruction. Additionally, instructors can use learning curve information to more accurately target educational resources to those who most require them.The learning curve approach requires a fine-grained collection of data that will not be possible in all educational settings; however, the increased use of an assessment paradigm that explicitly includes effort and its link to individual achievement could result in increased learner engagement and more effective instructional design.
Environmental bias and elastic curves on surfaces
International Nuclear Information System (INIS)
Guven, Jemal; María Valencia, Dulce; Vázquez-Montejo, Pablo
2014-01-01
The behavior of an elastic curve bound to a surface will reflect the geometry of its environment. This may occur in an obvious way: the curve may deform freely along directions tangent to the surface, but not along the surface normal. However, even if the energy itself is symmetric in the curve's geodesic and normal curvatures, which control these modes, very distinct roles are played by the two. If the elastic curve binds preferentially on one side, or is itself assembled on the surface, not only would one expect the bending moduli associated with the two modes to differ, binding along specific directions, reflected in spontaneous values of these curvatures, may be favored. The shape equations describing the equilibrium states of a surface curve described by an elastic energy accommodating environmental factors will be identified by adapting the method of Lagrange multipliers to the Darboux frame associated with the curve. The forces transmitted to the surface along the surface normal will be determined. Features associated with a number of different energies, both of physical relevance and of mathematical interest, are described. The conservation laws associated with trajectories on surface geometries exhibiting continuous symmetries are also examined. (paper)
Geometric invariant theory for polarized curves
Bini, Gilberto; Melo, Margarida; Viviani, Filippo
2014-01-01
We investigate GIT quotients of polarized curves. More specifically, we study the GIT problem for the Hilbert and Chow schemes of curves of degree d and genus g in a projective space of dimension d-g, as d decreases with respect to g. We prove that the first three values of d at which the GIT quotients change are given by d=a(2g-2) where a=2, 3.5, 4. We show that, for a>4, L. Caporaso's results hold true for both Hilbert and Chow semistability. If 3.5curves. If 2curves. We also analyze in detail the critical values a=3.5 and a=4, where the Hilbert semistable locus is strictly smaller than the Chow semistable locus. As an application, we obtain three compactications of the universal Jacobian over the moduli space of stable curves, weakly-pseudo-stable curves and pseu...
Global experience curves for wind farms
International Nuclear Information System (INIS)
Junginger, M.; Faaij, A.; Turkenburg, W.C.
2005-01-01
In order to forecast the technological development and cost of wind turbines and the production costs of wind electricity, frequent use is made of the so-called experience curve concept. Experience curves of wind turbines are generally based on data describing the development of national markets, which cause a number of problems when applied for global assessments. To analyze global wind energy price development more adequately, we compose a global experience curve. First, underlying factors for past and potential future price reductions of wind turbines are analyzed. Also possible implications and pitfalls when applying the experience curve methodology are assessed. Second, we present and discuss a new approach of establishing a global experience curve and thus a global progress ratio for the investment cost of wind farms. Results show that global progress ratios for wind farms may lie between 77% and 85% (with an average of 81%), which is significantly more optimistic than progress ratios applied in most current scenario studies and integrated assessment models. While the findings are based on a limited amount of data, they may indicate faster price reduction opportunities than so far assumed. With this global experience curve we aim to improve the reliability of describing the speed with which global costs of wind power may decline
Stenting for curved lesions using a novel curved balloon: Preliminary experimental study.
Tomita, Hideshi; Higaki, Takashi; Kobayashi, Toshiki; Fujii, Takanari; Fujimoto, Kazuto
2015-08-01
Stenting may be a compelling approach to dilating curved lesions in congenital heart diseases. However, balloon-expandable stents, which are commonly used for congenital heart diseases, are usually deployed in a straight orientation. In this study, we evaluated the effect of stenting with a novel curved balloon considered to provide better conformability to the curved-angled lesion. In vitro experiments: A Palmaz Genesis(®) stent (Johnson & Johnson, Cordis Co, Bridgewater, NJ, USA) mounted on the Goku(®) curve (Tokai Medical Co. Nagoya, Japan) was dilated in vitro to observe directly the behavior of the stent and balloon assembly during expansion. Animal experiment: A short Express(®) Vascular SD (Boston Scientific Co, Marlborough, MA, USA) stent and a long Express(®) Vascular LD stent (Boston Scientific) mounted on the curved balloon were deployed in the curved vessel of a pig to observe the effect of stenting in vivo. In vitro experiments: Although the stent was dilated in a curved fashion, stent and balloon assembly also rotated conjointly during expansion of its curved portion. In the primary stenting of the short stent, the stent was dilated with rotation of the curved portion. The excised stent conformed to the curved vessel. As the long stent could not be negotiated across the mid-portion with the balloon in expansion when it started curving, the mid-portion of the stent failed to expand fully. Furthermore, the balloon, which became entangled with the stent strut, could not be retrieved even after complete deflation. This novel curved balloon catheter might be used for implantation of the short stent in a curved lesion; however, it should not be used for primary stenting of the long stent. Post-dilation to conform the stent to the angled vessel would be safer than primary stenting irrespective of stent length. Copyright © 2014 Japanese College of Cardiology. Published by Elsevier Ltd. All rights reserved.
Development of the curve of Spee.
Marshall, Steven D; Caspersen, Matthew; Hardinger, Rachel R; Franciscus, Robert G; Aquilino, Steven A; Southard, Thomas E
2008-09-01
Ferdinand Graf von Spee is credited with characterizing human occlusal curvature viewed in the sagittal plane. This naturally occurring phenomenon has clinical importance in orthodontics and restorative dentistry, yet we have little understanding of when, how, or why it develops. The purpose of this study was to expand our understanding by examining the development of the curve of Spee longitudinally in a sample of untreated subjects with normal occlusion from the deciduous dentition to adulthood. Records of 16 male and 17 female subjects from the Iowa Facial Growth Study were selected and examined. The depth of the curve of Spee was measured on their study models at 7 time points from ages 4 (deciduous dentition) to 26 (adult dentition) years. The Wilcoxon signed rank test was used to compare changes in the curve of Spee depth between time points. For each subject, the relative eruption of the mandibular teeth was measured from corresponding cephalometric radiographs, and its contribution to the developing curve of Spee was ascertained. In the deciduous dentition, the curve of Spee is minimal. At mean ages of 4.05 and 5.27 years, the average curve of Spee depths are 0.24 and 0.25 mm, respectively. With change to the transitional dentition, corresponding to the eruption of the mandibular permanent first molars and central incisors (mean age, 6.91 years), the curve of Spee depth increases significantly (P < 0.0001) to a mean maximum depth of 1.32 mm. The curve of Spee then remains essentially unchanged until eruption of the second molars (mean age, 12.38 years), when the depth increases (P < 0.0001) to a mean maximum depth of 2.17 mm. In the adolescent dentition (mean age, 16.21 years), the depth decreases slightly (P = 0.0009) to a mean maximum depth of 1.98 mm, and, in the adult dentition (mean age 26.98 years), the curve remains unchanged (P = 0.66), with a mean maximum depth of 2.02 mm. No significant differences in curve of Spee development were found between
Hogue, T. S.; Blaine, A. C.; Martin, A. C.
2016-12-01
The ConocoPhillips Center for a Sustainable WE2ST (Water-Energy Education, Science, and Technology) is a testament to the power of collaboration and innovation. WE2ST began as a partnership between ConocoPhillips (foundation gift) and the Colorado School of Mines (CSM) with the goal of fostering solutions to water-energy challenges via education, research and outreach. The WE2ST center is a training ground for the next generation of water-energy-social scientists and engineers and is a natural fit for CSM, which is known for its expertise in water resources, water treatment technologies, petroleum engineering, geosciences, and hydrology. WE2ST has nine contributing faculty researchers that combine to create a web of expertise on sustainable energy and water resources. This research benefits unconventional energy producers, water-reliant stakeholders and the general public. Areas of focus for research include water sources (quality and quantity), integrated water-energy solution viability and risk, and social-corporate responsibility. The WE2ST Center currently provides annual support for 8-9 Graduate Fellows and 13 Undergraduate Scholars. Top-tier graduate students are recruited nationally and funded similar to an NSF Graduate Research Fellowship (GRF). Undergraduate Scholars are also recruited from across the CSM campus to gain experience in faculty laboratories and on research teams. All WE2ST students receive extensive professional skills training, leadership development, communication skills training, networking opportunities in the water-energy industries, and outreach opportunities in the community. The corner stone of the WE2ST Center is a focus on communication with the public. Both in social science research teams and in general interactions with the public, WE2ST seeks to be "an honest broker" amidst a very passionate and complex topic. WE2ST research is communicated by presentations at technical conferences, talking with people at public gatherings
F(α) curves: Experimental results
International Nuclear Information System (INIS)
Glazier, J.A.; Gunaratne, G.; Libchaber, A.
1988-01-01
We study the transition to chaos at the golden and silver means for forced Rayleigh-Benard (RB) convection in mercury. We present f(α) curves below, at, and above the transition, and provide comparisons to the curves calculated for the one-dimensional circle map. We find good agreement at both the golden and silver means. This confirms our earlier observation that for low amplitude forcing, forced RB convection is well described by the one-dimensional circle map and indicates that the f(α) curve is a good measure of the approach to criticality. For selected subcritical experimental data sets we calculate the degree of subcriticality. We also present both experimental and calculated results for f(α) in the presence of a third frequency. Again we obtain agreement: The presence of random noise or a third frequency narrows the right-hand (negative q) side of the f(α) curve. Subcriticality results in symmetrically narrowed curves. We can also distinguish these cases by examining the power spectra and Poincare sections of the time series
Multiwavelength light curve parameters of Cepheid variables
Directory of Open Access Journals (Sweden)
Bhardwaj Anupam
2017-01-01
Full Text Available We present a comparative analysis of theoretical and observed light curves of Cepheid variables using Fourier decomposition. The theoretical light curves at multiple wavelengths are generated using stellar pulsation models for chemical compositions representative of Cepheids in the Galaxy and Magellanic Clouds. The observed light curves at optical (VI, near-infrared (JHKs and mid-infrared (3.6 & 4.5-μm bands are compiled from the literature. We discuss the variation of light curve parameters as a function of period, wavelength and metallicity. Theoretical and observed Fourier amplitude parameters decrease with increase in wavelength while the phase parameters increase with wavelength. We find that theoretical amplitude parameters obtained using canonical mass-luminosity levels exhibit a greater offset with respect to observations when compared to non-canonical relations. We also discuss the impact of variation in convective efficiency on the light curve structure of Cepheid variables. The increase in mixing length parameter results in a zero-point offset in bolometric mean magnitudes and reduces the systematic large difference in theoretical amplitudes with respect to observations.
Incorporating experience curves in appliance standards analysis
International Nuclear Information System (INIS)
Desroches, Louis-Benoit; Garbesi, Karina; Kantner, Colleen; Van Buskirk, Robert; Yang, Hung-Chia
2013-01-01
There exists considerable evidence that manufacturing costs and consumer prices of residential appliances have decreased in real terms over the last several decades. This phenomenon is generally attributable to manufacturing efficiency gained with cumulative experience producing a certain good, and is modeled by an empirical experience curve. The technical analyses conducted in support of U.S. energy conservation standards for residential appliances and commercial equipment have, until recently, assumed that manufacturing costs and retail prices remain constant during the projected 30-year analysis period. This assumption does not reflect real market price dynamics. Using price data from the Bureau of Labor Statistics, we present U.S. experience curves for room air conditioners, clothes dryers, central air conditioners, furnaces, and refrigerators and freezers. These experience curves were incorporated into recent energy conservation standards analyses for these products. Including experience curves increases the national consumer net present value of potential standard levels. In some cases a potential standard level exhibits a net benefit when considering experience, whereas without experience it exhibits a net cost. These results highlight the importance of modeling more representative market prices. - Highlights: ► Past appliance standards analyses have assumed constant equipment prices. ► There is considerable evidence of consistent real price declines. ► We incorporate experience curves for several large appliances into the analysis. ► The revised analyses demonstrate larger net present values of potential standards. ► The results imply that past standards analyses may have undervalued benefits.
Comparison of power curve monitoring methods
Directory of Open Access Journals (Sweden)
Cambron Philippe
2017-01-01
Full Text Available Performance monitoring is an important aspect of operating wind farms. This can be done through the power curve monitoring (PCM of wind turbines (WT. In the past years, important work has been conducted on PCM. Various methodologies have been proposed, each one with interesting results. However, it is difficult to compare these methods because they have been developed using their respective data sets. The objective of this actual work is to compare some of the proposed PCM methods using common data sets. The metric used to compare the PCM methods is the time needed to detect a change in the power curve. Two power curve models will be covered to establish the effect the model type has on the monitoring outcomes. Each model was tested with two control charts. Other methodologies and metrics proposed in the literature for power curve monitoring such as areas under the power curve and the use of statistical copulas have also been covered. Results demonstrate that model-based PCM methods are more reliable at the detecting a performance change than other methodologies and that the effectiveness of the control chart depends on the types of shift observed.
Asymptotic scalings of developing curved pipe flow
Ault, Jesse; Chen, Kevin; Stone, Howard
2015-11-01
Asymptotic velocity and pressure scalings are identified for the developing curved pipe flow problem in the limit of small pipe curvature and high Reynolds numbers. The continuity and Navier-Stokes equations in toroidal coordinates are linearized about Dean's analytical curved pipe flow solution (Dean 1927). Applying appropriate scaling arguments to the perturbation pressure and velocity components and taking the limits of small curvature and large Reynolds number yields a set of governing equations and boundary conditions for the perturbations, independent of any Reynolds number and pipe curvature dependence. Direct numerical simulations are used to confirm these scaling arguments. Fully developed straight pipe flow is simulated entering a curved pipe section for a range of Reynolds numbers and pipe-to-curvature radius ratios. The maximum values of the axial and secondary velocity perturbation components along with the maximum value of the pressure perturbation are plotted along the curved pipe section. The results collapse when the scaling arguments are applied. The numerically solved decay of the velocity perturbation is also used to determine the entrance/development lengths for the curved pipe flows, which are shown to scale linearly with the Reynolds number.
Critical Factors for Inducing Curved Somatosensory Saccades
Directory of Open Access Journals (Sweden)
Tamami Nakano
2011-10-01
Full Text Available We are able to make a saccade toward a tactile stimuli to one hand, but trajectories of many saccades curved markedly when the arms were crossed (Groh & Sparks, 2006. However, it remains unknown why some curved and others did not. We therefore examined critical factors for inducing the curved somatosensory saccades. Participants made a saccade as soon as possible from a central fixation point toward a tactile stimulus delivered to one of the two hands, and switched between arms-crossed and arms-uncrossed postures every 6 trials. Trajectories were generally straight when the arms were uncrossed, but all participants made curved saccades when the arms were crossed (12–64%. We found that the probability of curved saccades depended critically on the onset latency: the probability was less than 5% when the latency was larger than 250 ms, but the probability increased up to 70–80% when the onset latency was 160 ms. This relationship was shared across participants. The results suggest that a touch in the arms-crossed posture was always mapped to the wrong hand in the initial phase up to 160 ms, and then remapped to the correct hand during the next 100 ms by some fundamental neural mechanisms shared across participants.
Surface growth kinematics via local curve evolution
Moulton, Derek E.
2012-11-18
A mathematical framework is developed to model the kinematics of surface growth for objects that can be generated by evolving a curve in space, such as seashells and horns. Growth is dictated by a growth velocity vector field defined at every point on a generating curve. A local orthonormal basis is attached to each point of the generating curve and the velocity field is given in terms of the local coordinate directions, leading to a fully local and elegant mathematical structure. Several examples of increasing complexity are provided, and we demonstrate how biologically relevant structures such as logarithmic shells and horns emerge as analytical solutions of the kinematics equations with a small number of parameters that can be linked to the underlying growth process. Direct access to cell tracks and local orientation enables for connections to be made to the underlying growth process. © 2012 Springer-Verlag Berlin Heidelberg.
Asymmetry dependence of the nuclear caloric curve
International Nuclear Information System (INIS)
McIntosh, A.B.; Bonasera, A.; Cammarata, P.; Hagel, K.; Heilborn, L.; Kohley, Z.; Mabiala, J.; May, L.W.; Marini, P.; Raphelt, A.; Souliotis, G.A.; Wuenschel, S.; Zarrella, A.; Yennello, S.J.
2013-01-01
A basic feature of the nuclear equation of state is not yet understood: the dependence of the nuclear caloric curve on the neutron–proton asymmetry. Predictions of theoretical models differ on the magnitude and even the sign of this dependence. In this work, the nuclear caloric curve is examined for fully reconstructed quasi-projectiles around mass A=50. The caloric curve extracted with the momentum quadrupole fluctuation thermometer shows that the temperature varies linearly with quasi-projectile asymmetry (N−Z)/A . An increase in asymmetry of 0.15 units corresponds to a decrease in temperature on the order of 1 MeV. These results also highlight the importance of a full quasi-projectile reconstruction in the study of thermodynamic properties of hot nuclei
The genus curve of the Abell clusters
Rhoads, James E.; Gott, J. Richard, III; Postman, Marc
1994-01-01
We study the topology of large-scale structure through a genus curve measurement of the recent Abell catalog redshift survey of Postman, Huchra, and Geller (1992). The structure is found to be spongelike near median density and to exhibit isolated superclusters and voids at high and low densities, respectively. The genus curve shows a slight shift toward 'meatball' topology, but remains consistent with the hypothesis of Gaussian random phase initial conditions. The amplitude of the genus curve corresponds to a power-law spectrum with index n = 0.21-0.47+0.43 on scales of 48/h Mpc or to a cold dark matter power spectrum with omega h = 0.36-0.17+0.46.
Differential geometry of curves and surfaces
Banchoff, Thomas F
2010-01-01
Students and professors of an undergraduate course in differential geometry will appreciate the clear exposition and comprehensive exercises in this book that focuses on the geometric properties of curves and surfaces, one- and two-dimensional objects in Euclidean space. The problems generally relate to questions of local properties (the properties observed at a point on the curve or surface) or global properties (the properties of the object as a whole). Some of the more interesting theorems explore relationships between local and global properties. A special feature is the availability of accompanying online interactive java applets coordinated with each section. The applets allow students to investigate and manipulate curves and surfaces to develop intuition and to help analyze geometric phenomena.
Experimental simulation of closed timelike curves.
Ringbauer, Martin; Broome, Matthew A; Myers, Casey R; White, Andrew G; Ralph, Timothy C
2014-06-19
Closed timelike curves are among the most controversial features of modern physics. As legitimate solutions to Einstein's field equations, they allow for time travel, which instinctively seems paradoxical. However, in the quantum regime these paradoxes can be resolved, leaving closed timelike curves consistent with relativity. The study of these systems therefore provides valuable insight into nonlinearities and the emergence of causal structures in quantum mechanics--essential for any formulation of a quantum theory of gravity. Here we experimentally simulate the nonlinear behaviour of a qubit interacting unitarily with an older version of itself, addressing some of the fascinating effects that arise in systems traversing a closed timelike curve. These include perfect discrimination of non-orthogonal states and, most intriguingly, the ability to distinguish nominally equivalent ways of preparing pure quantum states. Finally, we examine the dependence of these effects on the initial qubit state, the form of the unitary interaction and the influence of decoherence.
Design fatigue curve for Hastelloy-X
International Nuclear Information System (INIS)
Nishiguchi, Isoharu; Muto, Yasushi; Tsuji, Hirokazu
1983-12-01
In the design of components intended for elevated temperature service as the experimental Very High-Temperature gas-cooled Reactor (VHTR), it is essential to prevent fatigue failure and creep-fatigue failure. The evaluation method which uses design fatigue curves is adopted in the design rules. This report discussed several aspects of these design fatigue curves for Hastelloy-X (-XR) which is considered for use as a heat-resistant alloy in the VHTR. Examination of fatigue data gathered by a literature search including unpublished data showed that Brinkman's equation is suitable for the design curve of Hastelloy-X (-XR), where total strain range Δ epsilon sub(t) is used as independent variable and fatigue life Nsub(f) is transformed into log(log Nsub(f)). (author)
The genus curve of the Abell clusters
Rhoads, James E.; Gott, J. Richard, III; Postman, Marc
1994-01-01
We study the topology of large-scale structure through a genus curve measurement of the recent Abell catalog redshift survey of Postman, Huchra, and Geller (1992). The structure is found to be spongelike near median density and to exhibit isolated superclusters and voids at high and low densities, respectively. The genus curve shows a slight shift toward 'meatball' topology, but remains consistent with the hypothesis of Gaussian random phase initial conditions. The amplitude of the genus curve corresponds to a power-law spectrum with index n = 0.21(sub -0.47 sup +0.43) on scales of 48/h Mpc or to a cold dark matter power spectrum with omega h = 0.36(sub -0.17 sup +0.46).
Deep-learnt classification of light curves
DEFF Research Database (Denmark)
Mahabal, Ashish; Gieseke, Fabian; Pai, Akshay Sadananda Uppinakudru
2017-01-01
is to derive statistical features from the time series and to use machine learning methods, generally supervised, to separate objects into a few of the standard classes. In this work, we transform the time series to two-dimensional light curve representations in order to classify them using modern deep......Astronomy light curves are sparse, gappy, and heteroscedastic. As a result standard time series methods regularly used for financial and similar datasets are of little help and astronomers are usually left to their own instruments and techniques to classify light curves. A common approach...... learning techniques. In particular, we show that convolutional neural networks based classifiers work well for broad characterization and classification. We use labeled datasets of periodic variables from CRTS survey and show how this opens doors for a quick classification of diverse classes with several...
Energy efficiency and load curve impacts
International Nuclear Information System (INIS)
Feilberg, Nicolai
2002-01-01
One of SINTEF Energy Research's European RTD projects is the two-year EFFLOCOM (Energy EFFiciency and LOad curve impacts of COMmercial development in competitive markets). This project will determine the end-user response of different market-related services offered in deregulated power markets. The project will investigate the possibility of influencing load curves by using different price signals and two-way communications via Internet. The partners are from Denmark. Finland, England, France and Norway. SINTEF Energy Research is in charge of the project management. During the project, the changes in load curves will he studied in the in the participating countries before and after deregulation. Specific issues are the use of ICT, time- and situation-dependent tariffs and smart-house technology. The project will consist of 5 work packages that will give recommendations about new methods, guidelines and tools to promote effective use of energy in the partner countries. The total budget is EUR 692 000. (author)
Trend curve data development and testing
International Nuclear Information System (INIS)
McElroy, W.N.; Gold, R.; Simons, R.L.; Roberts, J.H.
1986-01-01
Existing trend curves do not account for previous and more recently observed test and power reactor flux-level, thermal neutron and γ-ray field-induced effects. Any agreement between measured data and trend curve predictions that does not adequately represent the important neutron environmental and temperature effects as well as the microstructural damage processes, therefore, could be fortuitous. Empirically derived end-of-life (EOL) and life-extension-range (LER) trend curves are presented and discussed in this paper for high temperature [∼288 0 C (550 0 F)] irradiation of two weld, two plate, and two forging pressure vessel (PV) steels and low-temperature [∼60 0 C (140 0 F)] irradiation of one support structure-type steel
Minimal families of curves on surfaces
Lubbes, Niels
2014-11-01
A minimal family of curves on an embedded surface is defined as a 1-dimensional family of rational curves of minimal degree, which cover the surface. We classify such minimal families using constructive methods. This allows us to compute the minimal families of a given surface.The classification of minimal families of curves can be reduced to the classification of minimal families which cover weak Del Pezzo surfaces. We classify the minimal families of weak Del Pezzo surfaces and present a table with the number of minimal families of each weak Del Pezzo surface up to Weyl equivalence.As an application of this classification we generalize some results of Schicho. We classify algebraic surfaces that carry a family of conics. We determine the minimal lexicographic degree for the parametrization of a surface that carries at least 2 minimal families. © 2014 Elsevier B.V.
Energy and GHG abatement cost curves
Energy Technology Data Exchange (ETDEWEB)
Alvarenga, Rafael [BHP Billiton Base Metals (Australia)
2010-07-01
Global warming due to various reasons but especially to emission of green house gases (GHGs) has become a cause for serious concern. This paper discusses the steps taken by BHP Billiton to reduce energy consumption and GHG emissions using cost curves. According to forecasts, global warming is expected to impact Chile badly and the rise in temperature could be between 1 and more than 5 degrees Celsius. Mining in Chile consumes a lot of energy, particularly electricity. Total energy and electricity consumption in 2007 was 13 and 36 % respectively. BHP base metals developed a set of abatement cost curves for energy and GHG in Chile and these are shown in figures. The methodology for the curves consisted of consultant visits to each mine operation. The study also includes mass energy balance and feasibility maps. The paper concludes that it is important to evaluate the potential for reducing emissions and energy and their associated costs.
POSSIBLE RECESSION CURVE APPLICATIONS FOR RETENTION EVALUATION
Directory of Open Access Journals (Sweden)
Daniel Liberacki
2015-11-01
Full Text Available The objective of the article was to present possible applications of recession flow curve in a small lowland watershed retention discharge size evaluation. The examined woodland micro catchment area of 0.52 sq km is located in Puszcza Zielonka in central Wielkopolska. The Hutka catchment is typically woody with high retention abilities. The catchment of the Hutka watercourse is forested in 89%, the other 11% is covered by swamps and wasteland. The predominant sites are fresh mixed coniferous forest (BMśw, fresh coniferous forest (Bśw and alder carr forest (Ol. Landscape in catchment is characterized by a large number of interior depressions, filled partly with rainwater or peatbogs, with poorly developed natural drainage. The watercourses do not exceed 1 km in length, the mean width is approx. 0.5 m, while mean depth ranges from 0.2 to 0.3 m. During hydrological research conducted in 1997/1998–1999/2000, 35 major (characteristic raised water stages were observed in Hutka after substantial precipitation. The recession curve dating from 18–24 September 2000 has the α and n rates nearest to average. Comparing the model curve and the curve created by observing watercourse flow, one can notice their resemblance and that they have similar ordinate values as well as shape. In the case of other recession curves, the maximum differences of ordinate values are also about 0.1–0.2 l/s/km2. The measuured α and n rates do not reveal any regularities. There are no significant statistical Horton model parameter (for recession flow curves dependencies between α and n and e.g. initial flows (Qo or the whole period of high water waves (Qp. Consequently, calculated relation between these parameters is only an approximation for the general evaluation of the retention discharge in the catchment area towards retention with flow function.
Fractal properties of critical invariant curves
International Nuclear Information System (INIS)
Hunt, B.R.; Yorke, J.A.; Khanin, K.M.; Sinai, Y.G.
1996-01-01
We examine the dimension of the invariant measure for some singular circle homeomorphisms for a variety of rotation numbers, through both the thermodynamic formalism and numerical computation. The maps we consider include those induced by the action of the standard map on an invariant curve at the critical parameter value beyond which the curve is destroyed. Our results indicate that the dimension is universal for a given type of singularity and rotation number, and that among all rotation numbers, the golden mean produces the largest dimension
Trend curve data development and testing
International Nuclear Information System (INIS)
McElroy, W.N.; Gold, R.; Simons, R.L.; Roberts, J.H.
1986-08-01
Existing trend curves do not account for previous and more recently observed test and power reactor flux-level, thermal neutron and gamma-ray field-induced effects. Any agreement between measured data and trend curve predictions that does not adequately represent the important neutron environmental and temperature effects as well as the microstructural damage processes, therefore, could be fortuitous. Two principal questions asked concerning the metallurgical condition of the pressure vessel and its support structures are: What are the controlling variables; and What effects do they have on changing the metallurgical properties of the vessel and its support structures throughout their lifetimes
Linear Titration Curves of Acids and Bases.
Joseph, N R
1959-05-29
The Henderson-Hasselbalch equation, by a simple transformation, becomes pH - pK = pA - pB, where pA and pB are the negative logarithms of acid and base concentrations. Sigmoid titration curves then reduce to straight lines; titration curves of polyelectrolytes, to families of straight lines. The method is applied to the titration of the dipeptide glycyl aminotricarballylic acid, with four titrable groups. Results are expressed as Cartesian and d'Ocagne nomograms. The latter is of a general form applicable to polyelectrolytes of any degree of complexity.
From Curve Fitting to Machine Learning
Zielesny, Achim
2011-01-01
The analysis of experimental data is at heart of science from its beginnings. But it was the advent of digital computers that allowed the execution of highly non-linear and increasingly complex data analysis procedures - methods that were completely unfeasible before. Non-linear curve fitting, clustering and machine learning belong to these modern techniques which are a further step towards computational intelligence. The goal of this book is to provide an interactive and illustrative guide to these topics. It concentrates on the road from two dimensional curve fitting to multidimensional clus
Phonon dispersion curves for CsCN
International Nuclear Information System (INIS)
Gaur, N.K.; Singh, Preeti; Rini, E.G.; Galgale, Jyostna; Singh, R.K.
2004-01-01
The motivation for the present work was gained from the recent publication on phonon dispersion curves (PDCs) of CsCN from the neutron scattering technique. We have applied the extended three-body force shell model (ETSM) by incorporating the effect of coupling between the translation modes and the orientation of cyanide molecules for the description of phonon dispersion curves of CsCN between the temperatures 195 and 295 K. Our results on PDCs in symmetric direction are in good agreement with the experimental data measured with inelastic neutron scattering technique. (author)
Bound states in curved quantum waveguides
International Nuclear Information System (INIS)
Exner, P.; Seba, P.
1987-01-01
We study free quantum particle living on a curved planar strip Ω of a fixed width d with Dirichlet boundary conditions. It can serve as a model for electrons in thin films on a cylindrical-type substrate, or in a curved quantum wire. Assuming that the boundary of Ω is infinitely smooth and its curvature decays fast enough at infinity, we prove that a bound state with energy below the first transversal mode exists for all sufficiently small d. A lower bound on the critical width is obtained using the Birman-Schwinger technique. (orig.)
Strange Curves, Counting Rabbits, & Other Mathematical Explorations
Ball, Keith
2011-01-01
How does mathematics enable us to send pictures from space back to Earth? Where does the bell-shaped curve come from? Why do you need only 23 people in a room for a 50/50 chance of two of them sharing the same birthday? In Strange Curves, Counting Rabbits, and Other Mathematical Explorations, Keith Ball highlights how ideas, mostly from pure math, can answer these questions and many more. Drawing on areas of mathematics from probability theory, number theory, and geometry, he explores a wide range of concepts, some more light-hearted, others central to the development of the field and used dai
Boiling curve in high quality flow boiling
International Nuclear Information System (INIS)
Shiralkar, B.S.; Hein, R.A.; Yadigaroglu, G.
1980-01-01
The post dry-out heat transfer regime of the flow boiling curve was investigated experimentally for high pressure water at high qualities. The test section was a short round tube located downstream of a hot patch created by a temperature controlled segment of tubing. Results from the experiment showed that the distance from the dryout point has a significant effect on the downstream temperatures and there was no unique boiling curve. The heat transfer coefficients measured sufficiently downstream of the dryout point could be correlated using the Heineman correlation for superheated steam, indicating that the droplet deposition effects could be neglected in this region
Light Curve Analysis of SAO23229
Directory of Open Access Journals (Sweden)
Ho-Il Kim
1993-06-01
Full Text Available We have made UBV light curves of a newly discovered eclipsing binary, SAO23229 at Sobaeksan Astronomy Observatory. We determined a minimum light time of HJD2448636.1170+/-0.0005 that is 3 minutes later than predicted time, and founda peculiar light variation at phase 0.75 that may not be secondary eclipse. Orbital period of SAO23229 would be 4.2 days rather than 2.1 days. Our analysis of the light curves shows that SAO23229 has a detached configuration consisting of two almost identical F type main sequence stars.
Analysis of characteristic performance curves in radiodiagnosis by an observer
International Nuclear Information System (INIS)
Kossovoj, A.L.
1988-01-01
Methods and ways of construction of performance characteristic curves (PX-curves) in roentgenology, their qualitative and quantitative estimation are described. Estimation of PX curves application for analysis of scintigraphic and sonographic images is presented
a new approach of Analysing GRB light curves
International Nuclear Information System (INIS)
Varga, B.; Horvath, I.
2005-01-01
We estimated the T xx quantiles of the cumulative GRB light curves using our recalculated background. The basic information of the light curves was extracted by multivariate statistical methods. The possible classes of the light curves are also briefly discussed
Bijlsma, S.; Boelens, H. F. M.; Hoefsloot, H. C. J.; Smilde, A. K.
2000-01-01
A traditional curve fitting (TCF) algorithm is compared with a classical curve resolution (CCR) approach for estimating reaction rate constants from spectral data obtained in time of a chemical reaction. In the TCF algorithm, reaction rate constants an estimated from the absorbance versus time data
In-Vehicle Dynamic Curve-Speed Warnings at High-Risk Rural Curves
2018-03-01
Lane-departure crashes at horizontal curves represent a significant portion of fatal crashes on rural Minnesota roads. Because of this, solutions are needed to aid drivers in identifying upcoming curves and inform them of a safe speed at which they s...
Matter fields in curved space-time
International Nuclear Information System (INIS)
Viet, Nguyen Ai; Wali, Kameshwar C.
2000-01-01
We study the geometry of a two-sheeted space-time within the framework of non-commutative geometry. As a prelude to the Standard Model in curved space-time, we present a model of a left- and a right- chiral field living on the two sheeted-space time and construct the action functionals that describe their interactions
Some genus 3 curves with many points
Auer, R; Top, J; Fieker, C; Kohel, DR
2002-01-01
We explain a naive approach towards the problem of finding genus 3 curves C over any given finite field F-q of odd characteristic, with a number of rational points close to the Hasse-Weil-Serre upper bound q+1+3[2rootq]. The method turns out to be successful at least in characteristic 3.
PV experience curves for the Netherlands
International Nuclear Information System (INIS)
Gerwig, R.
2005-01-01
Experience curves are one of several tools used by policy makers to take a look at market development. Numerous curves have been constructed for PV but none specific to the Netherlands. The objective of this report is to take a look at the price development of grid-connected PV systems in the Netherlands using the experience curve theory. After a literature and internet search and attempts to acquire information from PV companies information on 51% of the totally installed capacity was found. Curves for the period 1991-2001 were constructed based on system price, BOS (balance-of-system) price and inverter price. The progress ratio of the locally learning BOS was similar to the globally learning module market. This indicates that the pace of development of the Dutch PV market is similar to the globally followed pace. Improvement of the detail of the data might help to get a better idea of which BOS components have declined most. The similar progress ratio also shows the importance of investing both in module and system research as is the case in the Netherlands
Bootstrap confidence intervals for principal response curves
Timmerman, Marieke E.; Ter Braak, Cajo J. F.
2008-01-01
The principal response curve (PRC) model is of use to analyse multivariate data resulting from experiments involving repeated sampling in time. The time-dependent treatment effects are represented by PRCs, which are functional in nature. The sample PRCs can be estimated using a raw approach, or the
Bootstrap Confidence Intervals for Principal Response Curves
Timmerman, M.E.; Braak, ter C.J.F.
2008-01-01
The principal response curve (PRC) model is of use to analyse multivariate data resulting from experiments involving repeated sampling in time. The time-dependent treatment effects are represented by PRCs, which are functional in nature. The sample PRCs can be estimated using a raw approach, or the
Light extraction block with curved surface
Levermore, Peter; Krall, Emory; Silvernail, Jeffrey; Rajan, Kamala; Brown, Julia J.
2016-03-22
Light extraction blocks, and OLED lighting panels using light extraction blocks, are described, in which the light extraction blocks include various curved shapes that provide improved light extraction properties compared to parallel emissive surface, and a thinner form factor and better light extraction than a hemisphere. Lighting systems described herein may include a light source with an OLED panel. A light extraction block with a three-dimensional light emitting surface may be optically coupled to the light source. The three-dimensional light emitting surface of the block may includes a substantially curved surface, with further characteristics related to the curvature of the surface at given points. A first radius of curvature corresponding to a maximum principal curvature k.sub.1 at a point p on the substantially curved surface may be greater than a maximum height of the light extraction block. A maximum height of the light extraction block may be less than 50% of a maximum width of the light extraction block. Surfaces with cross sections made up of line segments and inflection points may also be fit to approximated curves for calculating the radius of curvature.
Spherical images and inextensible curved folding
Seffen, Keith A.
2018-02-01
In their study, Duncan and Duncan [Proc. R. Soc. London A 383, 191 (1982), 10.1098/rspa.1982.0126] calculate the shape of an inextensible surface folded in two about a general curve. They find the analytical relationships between pairs of generators linked across the fold curve, the shape of the original path, and the fold angle variation along it. They present two special cases of generator layouts for which the fold angle is uniform or the folded curve remains planar, for simplifying practical folding in sheet-metal processes. We verify their special cases by a graphical treatment according to a method of Gauss. We replace the fold curve by a piecewise linear path, which connects vertices of intersecting pairs of hinge lines. Inspired by the d-cone analysis by Farmer and Calladine [Int. J. Mech. Sci. 47, 509 (2005), 10.1016/j.ijmecsci.2005.02.013], we construct the spherical images for developable folding of successive vertices: the operating conditions of the special cases in Duncan and Duncan are then revealed straightforwardly by the geometric relationships between the images. Our approach may be used to synthesize folding patterns for novel deployable and shape-changing surfaces without need of complex calculation.
Principal normal indicatrices of closed space curves
DEFF Research Database (Denmark)
Røgen, Peter
1999-01-01
A theorem due to J. Weiner, which is also proven by B. Solomon, implies that a principal normal indicatrix of a closed space curve with nonvanishing curvature has integrated geodesic curvature zero and contains no subarc with integrated geodesic curvature pi. We prove that the inverse problem alw...
Steady turbulent flow in curved rectangular channels
De Vriend, H.J.
1979-01-01
After the study of fully developed and developing steady laminar flow in curved channels of shallow rectangular wet cross-section (see earlier reports in this series), steady turbulent flow in such channels is investigated as a next step towards a mathematical model of the flow in shallow river
ATLAS detector records its first curved muon
2007-01-01
The barrel muon spectrometer of the ATLAS detector has acquired its first cosmic event in a magnetic field produced by the barrel toroid magnet. This was an important test of the chambers in their final configurations, and marked the first triggering and measurement of curved cosmic ray muons in ATLAS.
Dual kinetic curves in reversible electrochemical systems.
Directory of Open Access Journals (Sweden)
Michael J Hankins
Full Text Available We introduce dual kinetic chronoamperometry, in which reciprocal relations are established between the kinetic curves of electrochemical reactions that start from symmetrical initial conditions. We have performed numerical and experimental studies in which the kinetic curves of the electron-transfer processes are analyzed for a reversible first order reaction. Experimental tests were done with the ferrocyanide/ferricyanide system in which the concentrations of each component could be measured separately using the platinum disk/gold ring electrode. It is shown that the proper ratio of the transient kinetic curves obtained from cathodic and anodic mass transfer limited regions give thermodynamic time invariances related to the reaction quotient of the bulk concentrations. Therefore, thermodynamic time invariances can be observed at any time using the dual kinetic curves for reversible reactions. The technique provides a unique possibility to extract the non-steady state trajectory starting from one initial condition based only on the equilibrium constant and the trajectory which starts from the symmetrical initial condition. The results could impact battery technology by predicting the concentrations and currents of the underlying non-steady state processes in a wide domain from thermodynamic principles and limited kinetic information.
Remote sensing used for power curves
DEFF Research Database (Denmark)
Wagner, Rozenn; Ejsing Jørgensen, Hans; Schmidt Paulsen, Uwe
2008-01-01
Power curve measurement for large wind turbines requires taking into account more parameters than only the wind speed at hub height. Based on results from aerodynamic simulations, an equivalent wind speed taking the wind shear into account was defined and found to reduce the power standard deviat...
Asymptotic Translation Length in the Curve Complex
Valdivia, Aaron D.
2013-01-01
We show that when the genus and punctures of a surface are directly proportional by some rational number the minimal asymptotic translation length in the curve complex has behavior inverse to the square of the Euler characteristic. We also show that when the genus is fixed and the number of punctures varies the behavior is inverse to the Euler characteristic.
Strong imploding shock, the representative curve
International Nuclear Information System (INIS)
Mishkin, E.A.; Alejaldre, C.
1981-01-01
The representative curve of the ideal gas behind the front of a spherically, or cylindrically, symmetric strong imploding shock is shown to pass through the point where the reduced pressure is maximum, P(xisub(m)) = Psub(m)sub(a)sub(x). (orig.)
Focus on Physics: The Delightful Catenary Curve
Hewitt, Paul G.
2017-01-01
When teaching how "tension" and "compression" relate to geometrical structures such as bridges, arches, and domes, The author shows a picture of the Notre Dame Cathedral in Paris, completed in the 14th century, and presents a lesson on using the curve called a catenary to explain how he teaches about tension and compression…
Nonlinear Growth Curves in Developmental Research
Grimm, Kevin J.; Ram, Nilam; Hamagami, Fumiaki
2011-01-01
Developmentalists are often interested in understanding change processes, and growth models are the most common analytic tool for examining such processes. Nonlinear growth curves are especially valuable to developmentalists because the defining characteristics of the growth process such as initial levels, rates of change during growth spurts, and…
Residual Structures in Latent Growth Curve Modeling
Grimm, Kevin J.; Widaman, Keith F.
2010-01-01
Several alternatives are available for specifying the residual structure in latent growth curve modeling. Two specifications involve uncorrelated residuals and represent the most commonly used residual structures. The first, building on repeated measures analysis of variance and common specifications in multilevel models, forces residual variances…
Updated Hubbert curves analyze world oil supply
International Nuclear Information System (INIS)
Ivanhoe, L.F.
1996-01-01
The question is not whether, but when, world crude oil production will start to decline, ushering in the permanent oil shock era. While global information for predicting this event is not so straightforward as the data M. King Hubbert used in creating his famous Hubbert Curve that predicted the US (Lower 48 states, or US/48) 1970 oil production peak, there are strong indications that most of the world's large exploration targets have now been found. Meanwhile, the earth's population is exploding along with the oil needs of Asia's developing nations. This article reviews Hubbert's original analyses on oil discovery and production curves for the US/48 and projects his proven methodology onto global oil discoveries and production as of 1992. The world's oil discovery curve peaked in 1962, and thence declined, as a Hubbert Curve predicts. However, global production was restricted after the 1973 Arab oil embargo. Otherwise, world production would have peaked in the mid-1990s. Two graphs show alternate versions of future global oil production
Growth Curves for Girls with Turner Syndrome
Directory of Open Access Journals (Sweden)
Fabio Bertapelli
2014-01-01
Full Text Available The objective of this study was to review the growth curves for Turner syndrome, evaluate the methodological and statistical quality, and suggest potential growth curves for clinical practice guidelines. The search was carried out in the databases Medline and Embase. Of 1006 references identified, 15 were included. Studies constructed curves for weight, height, weight/height, body mass index, head circumference, height velocity, leg length, and sitting height. The sample ranged between 47 and 1,565 (total = 6,273 girls aged 0 to 24 y, born between 1950 and 2006. The number of measures ranged from 580 to 9,011 (total = 28,915. Most studies showed strengths such as sample size, exclusion of the use of growth hormone and androgen, and analysis of confounding variables. However, the growth curves were restricted to height, lack of information about selection bias, limited distributional properties, and smoothing aspects. In conclusion, we observe the need to construct an international growth reference for girls with Turner syndrome, in order to provide support for clinical practice guidelines.
Sound concentration caused by curved surfaces
Vercammen, M.L.S.
2012-01-01
In room acoustics the focusing effect of reflections from concave surfaces is a wellknown problem. Although curved surfaces are found throughout the history of architecture, the occurrence of concave surfaces has tended to increase in modern architecture, due to new techniques in design, materials
Singular interactions supported by embedded curves
International Nuclear Information System (INIS)
Kaynak, Burak Tevfik; Turgut, O Teoman
2012-01-01
In this work, singular interactions supported by embedded curves on Riemannian manifolds are discussed from a more direct and physical perspective, via the heat kernel approach. We show that the renormalized problem is well defined, the ground state is finite and the corresponding wavefunction is positive. The renormalization group invariance of the model is also discussed. (paper)
Theoretical Magnon Dispersion Curves for Gd
DEFF Research Database (Denmark)
Lindgård, Per-Anker; Harmon, B. N.; Freeman, A. J.
1975-01-01
The magnon dispersion curve of Gd metal has been determined from first principles by use of augmented-plane-wave energy bands and wave functions. The exchange matrix elements I(k⃗, k⃗′) between the 4f electrons and the conduction electrons from the first six energy bands were calculated under...
A Probabilistic Framework for Curve Evolution
DEFF Research Database (Denmark)
Dahl, Vedrana Andersen
2017-01-01
approach include ability to handle textured images, simple generalization to multiple regions, and efficiency in computation. We test our probabilistic framework in combination with parametric (snakes) and geometric (level-sets) curves. The experimental results on composed and natural images demonstrate...
Covariant quantizations in plane and curved spaces
International Nuclear Information System (INIS)
Assirati, J.L.M.; Gitman, D.M.
2017-01-01
We present covariant quantization rules for nonsingular finite-dimensional classical theories with flat and curved configuration spaces. In the beginning, we construct a family of covariant quantizations in flat spaces and Cartesian coordinates. This family is parametrized by a function ω(θ), θ element of (1,0), which describes an ambiguity of the quantization. We generalize this construction presenting covariant quantizations of theories with flat configuration spaces but already with arbitrary curvilinear coordinates. Then we construct a so-called minimal family of covariant quantizations for theories with curved configuration spaces. This family of quantizations is parametrized by the same function ω(θ). Finally, we describe a more wide family of covariant quantizations in curved spaces. This family is already parametrized by two functions, the previous one ω(θ) and by an additional function Θ(x,ξ). The above mentioned minimal family is a part at Θ = 1 of the wide family of quantizations. We study constructed quantizations in detail, proving their consistency and covariance. As a physical application, we consider a quantization of a non-relativistic particle moving in a curved space, discussing the problem of a quantum potential. Applying the covariant quantizations in flat spaces to an old problem of constructing quantum Hamiltonian in polar coordinates, we directly obtain a correct result. (orig.)
Covariant quantizations in plane and curved spaces
Energy Technology Data Exchange (ETDEWEB)
Assirati, J.L.M. [University of Sao Paulo, Institute of Physics, Sao Paulo (Brazil); Gitman, D.M. [Tomsk State University, Department of Physics, Tomsk (Russian Federation); P.N. Lebedev Physical Institute, Moscow (Russian Federation); University of Sao Paulo, Institute of Physics, Sao Paulo (Brazil)
2017-07-15
We present covariant quantization rules for nonsingular finite-dimensional classical theories with flat and curved configuration spaces. In the beginning, we construct a family of covariant quantizations in flat spaces and Cartesian coordinates. This family is parametrized by a function ω(θ), θ element of (1,0), which describes an ambiguity of the quantization. We generalize this construction presenting covariant quantizations of theories with flat configuration spaces but already with arbitrary curvilinear coordinates. Then we construct a so-called minimal family of covariant quantizations for theories with curved configuration spaces. This family of quantizations is parametrized by the same function ω(θ). Finally, we describe a more wide family of covariant quantizations in curved spaces. This family is already parametrized by two functions, the previous one ω(θ) and by an additional function Θ(x,ξ). The above mentioned minimal family is a part at Θ = 1 of the wide family of quantizations. We study constructed quantizations in detail, proving their consistency and covariance. As a physical application, we consider a quantization of a non-relativistic particle moving in a curved space, discussing the problem of a quantum potential. Applying the covariant quantizations in flat spaces to an old problem of constructing quantum Hamiltonian in polar coordinates, we directly obtain a correct result. (orig.)
Numerical analysis of thermoluminescence glow curves
International Nuclear Information System (INIS)
Gomez Ros, J. M.; Delgado, A.
1989-01-01
This report presents a method for the numerical analysis of complex thermoluminescence glow curves resolving the individual glow peak components. The method employs first order kinetics analytical expressions and is based In a Marquart-Levenberg minimization procedure. A simplified version of this method for thermoluminescence dosimetry (TLD) is also described and specifically developed to operate whit Lithium Fluoride TLD-100. (Author). 36 refs
Irregularities in the dendrochronological calibration curve
International Nuclear Information System (INIS)
Ottaway, J.H.; Ottaway, B.
1975-01-01
A discussion is presented on the reality or otherwise of short-term deviations from a linear or smooth curve relating conventional C-14 dates to dendrochronological measurements. The possibility of the effect of short-term changes in the earth's atmosphere and in the oceans, and particularly in their temperature, is considered. (U.K.)
A spectral mean for random closed curves
van Lieshout, Maria Nicolette Margaretha
2016-01-01
We propose a spectral mean for closed sets described by sample points on their boundaries subject to mis-alignment and noise. We derive maximum likelihood estimators for the model and noise parameters in the Fourier domain. We estimate the unknown mean boundary curve by back-transformation and
A spectral mean for random closed curves
M.N.M. van Lieshout (Marie-Colette)
2016-01-01
textabstractWe propose a spectral mean for closed sets described by sample points on their boundaries subject to mis-alignment and noise. We derive maximum likelihood estimators for the model and noise parameters in the Fourier domain. We estimate the unknown mean boundary curve by
Contribution to the boiling curve of sodium
International Nuclear Information System (INIS)
Schins, H.E.J.
1975-01-01
Sodium in a pool was preheated to saturation temperatures at system pressures of 200, 350 and 500 torr. A test section of normal stainless steel was then extra heated by means of the conical fitting condenser zone of a heat pipe. Measurements were made of heat transfer fluxes, q in W/cm 2 , as a function of wall excess temperature above saturation, THETA = Tsub(w) - Tsub(s) in 0 C, both, in natural convection and in boiling regimes. These measurements make it possible to select the Subbotin natural convection and nucleate boiling curves among other variants proposed in literature. Further it is empirically demonstrated on water that the minimum film boiling point corresponds to the homogeneous nucleation temperature calculated by the Doering formula. Assuming that the minimum film boiling point of sodium can be obtained in the same manner, it is then possible to give an appoximate boiling curve of sodium for the use in thermal interaction studies. At 1 atm the heat transfer fluxes q versus wall temperatures THETA are for a point on the natural convection curve 0.3 W/cm 2 and 2 0 C; for start of boiling 1.6 W/cm 2 and 6 0 C; for peak heat flux 360 W/cm 2 and 37 0 C; for minimum film boiling 30 W/cm 2 and 905 0 C and for a point on the film boiling curve 160 W/cm 2 and 2,000 0 C. (orig.) [de
Designing the Alluvial Riverbeds in Curved Paths
Macura, Viliam; Škrinár, Andrej; Štefunková, Zuzana; Muchová, Zlatica; Majorošová, Martina
2017-10-01
The paper presents the method of determining the shape of the riverbed in curves of the watercourse, which is based on the method of Ikeda (1975) developed for a slightly curved path in sandy riverbed. Regulated rivers have essentially slightly and smoothly curved paths; therefore, this methodology provides the appropriate basis for river restoration. Based on the research in the experimental reach of the Holeška Brook and several alluvial mountain streams the methodology was adjusted. The method also takes into account other important characteristics of bottom material - the shape and orientation of the particles, settling velocity and drag coefficients. Thus, the method is mainly meant for the natural sand-gravel material, which is heterogeneous and the particle shape of the bottom material is very different from spherical. The calculation of the river channel in the curved path provides the basis for the design of optimal habitat, but also for the design of foundations of armouring of the bankside of the channel. The input data is adapted to the conditions of design practice.
Fermat's Technique of Finding Areas under Curves
Staples, Ed
2004-01-01
Perhaps next time teachers head towards the fundamental theorem of calculus in their classroom, they may wish to consider Fermat's technique of finding expressions for areas under curves, beautifully outlined in Boyer's History of Mathematics. Pierre de Fermat (1601-1665) developed some important results in the journey toward the discovery of the…
Quantum Field Theory in Curved Spacetime
Reynolds, Sally C.; Gallagher, Andrew
2012-03-01
List of contributors; Foreword J. T. Francis Thackeray; 1. African genesis: an evolving paradigm Sally C. Reynolds; 2. Academic genealogy Peter Ungar and Phillip V. Tobias; Part I. In Search of Origins: Evolutionary Theory, New Species, and Paths into the Past: 3. Speciation in hominin evolution Colin Groves; 4. Searching for a new paradigm for hominid origins in Chad (Central Africa) Michel Brunet; 5. From hominoid arboreality to hominid bipedalism Brigitte Senut; 6. Orrorin and the African ape/hominid dichotomy Martin Pickford; 7. A brief history and results of 40 years of Sterkfontein excavations Ronald J. Clarke; Part II. Hominin Morphology Through Time: Brains, Bodies and Teeth: 8. Hominin brain evolution, 1925-2011: an emerging overview Dean Falk; 9. The issue of brain reorganisation in Australopithecus and early hominids: Dart had it right Ralph L. Holloway; 10. The mass of the human brain: is it a spandrel? Paul R. Manger, Jason Hemingway, Muhammad Spocter and Andrew Gallagher; 11. Origin and diversity of early hominin bipedalism Henry M. McHenry; 12. Forelimb adaptations in Australopithecus afarensis Michelle S. M. Drapeau; 13. Hominin proximal femur morphology from the Tugen Hills to Flores Brian G. Richmond and William L. Jungers; 14. Daily rates of dentine formation and root extension rates in Paranthropus boisei, KNM-ER 1817, from Koobi Fora, Kenya M. Christopher Dean; 15. On the evolutionary development of early hominid molar teeth and the Gondolin Paranthropus molar Kevin L. Kuykendall; 16. Digital South African fossils: morphological studies using reference-based reconstruction and electronic preparation Gerhard W. Weber, Philipp Gunz, Simon Neubauer, Philipp Mitteroecker and Fred L. Bookstein; Part III. Modern Human Origins: Patterns, and Processes: 17. Body size in African Middle Pleistocene Homo Steven E. Churchill, Lee R. Berger, Adam Hartstone-Rose and Headman Zondo; 18. The African origin of recent humanity Milford H. Wolpoff and Sang-Hee Lee
Variability of the Wind Turbine Power Curve
Directory of Open Access Journals (Sweden)
Mahesh M. Bandi
2016-09-01
Full Text Available Wind turbine power curves are calibrated by turbine manufacturers under requirements stipulated by the International Electrotechnical Commission to provide a functional mapping between the mean wind speed v ¯ and the mean turbine power output P ¯ . Wind plant operators employ these power curves to estimate or forecast wind power generation under given wind conditions. However, it is general knowledge that wide variability exists in these mean calibration values. We first analyse how the standard deviation in wind speed σ v affects the mean P ¯ and the standard deviation σ P of wind power. We find that the magnitude of wind power fluctuations scales as the square of the mean wind speed. Using data from three planetary locations, we find that the wind speed standard deviation σ v systematically varies with mean wind speed v ¯ , and in some instances, follows a scaling of the form σ v = C × v ¯ α ; C being a constant and α a fractional power. We show that, when applicable, this scaling form provides a minimal parameter description of the power curve in terms of v ¯ alone. Wind data from different locations establishes that (in instances when this scaling exists the exponent α varies with location, owing to the influence of local environmental conditions on wind speed variability. Since manufacturer-calibrated power curves cannot account for variability influenced by local conditions, this variability translates to forecast uncertainty in power generation. We close with a proposal for operators to perform post-installation recalibration of their turbine power curves to account for the influence of local environmental factors on wind speed variability in order to reduce the uncertainty of wind power forecasts. Understanding the relationship between wind’s speed and its variability is likely to lead to lower costs for the integration of wind power into the electric grid.
Curved bones: An adaptation to habitual loading.
Milne, Nick
2016-10-21
Why are long bones curved? It has long been considered a paradox that many long bones supporting mammalian bodies are curved, since this curvature results in the bone undergoing greater bending, with higher strains and so greater fracture risk under load. This study develops a theoretical model wherein the curvature is a response to bending strains imposed by the requirements of locomotion. In particular the radioulna of obligate quadrupeds is a lever operated by the triceps muscle, and the bending strains induced by the triceps muscle counter the bending resulting from longitudinal loads acting on the curved bone. Indeed the theoretical model reverses this logic and suggests that the curvature is itself a response to the predictable bending strains induced by the triceps muscle. This, in turn, results in anatomical arrangements of bone, muscle and tendon that create a simple physiological mechanism whereby the bone can resist the bending due to the action of triceps in supporting and moving the body. The model is illustrated by contrasting the behaviour of a finite element model of a llama radioulna to that of a straightened version of the same bone. The results show that longitudinal and flexor muscle forces produce bending strains that effectively counter strains due to the pull of the triceps muscle in the curved but not in the straightened model. It is concluded that the curvature of these and other curved bones adds resilience to the skeleton by acting as pre-stressed beams or strainable pre-buckled struts. It is also proposed that the cranial bending strains that result from triceps, acting on the lever that is the radioulna, can explain the development of the curvature of such bones. Crown Copyright © 2016. Published by Elsevier Ltd. All rights reserved.
New configuration factors for curved surfaces
International Nuclear Information System (INIS)
Cabeza-Lainez, Jose M.; Pulido-Arcas, Jesus A.
2013-01-01
Curved surfaces have not been thoroughly considered in radiative transfer analysis mainly due to the difficulties arisen in the integration process and perhaps because of the lack of spatial vision of the researchers. It is a fact, especially for architectural lighting, that when concave geometries appear inside a curved space, they are mostly avoided. In this way, a vast repertoire of significant forms is neglected and energy waste is evident. Starting from the properties of volumes enclosed by the minimum number of surfaces, the authors formulate, with little calculus, new simple laws, which enable them to discover a set of configuration factors for caps and various segments of the sphere. The procedure is subsequently extended to previously unimagined surfaces as the paraboloid, the ellipsoid or the cone. Appropriate combination of the said forms with right truncated cones produces several complex volumes, often used in architectural and engineering creations and whose radiative performance could not be accurately predicted for decades. To complete the research, a new method for determining interreflections in curved volumes is also presented. Radiative transfer simulation benefits from these findings, as the simplicity of the results has led the authors to create innovative software more efficient for design and evaluation and applicable to emerging fields like LED lighting. -- Highlights: ► Friendly revision of fundamentals of radiative transfer. ► New configuration factors for curved surfaces obtained without calculus. ► New method for interreflections in curved geometries. ► Enhanced simulation algorithms. ► Fast comparison of radiative performances of surfaces
IDF-curves for precipitation In Belgium
International Nuclear Information System (INIS)
Mohymont, Bernard; Demarde, Gaston R.
2004-01-01
The Intensity-Duration-Frequency (IDF) curves for precipitation constitute a relationship between the intensity, the duration and the frequency of rainfall amounts. The intensity of precipitation is expressed in mm/h, the duration or aggregation time is the length of the interval considered while the frequency stands for the probability of occurrence of the event. IDF-curves constitute a classical and useful tool that is primarily used to dimension hydraulic structures in general, as e.g., sewer systems and which are consequently used to assess the risk of inundation. In this presentation, the IDF relation for precipitation is studied for different locations in Belgium. These locations correspond to two long-term, high-quality precipitation networks of the RMIB: (a) the daily precipitation depths of the climatological network (more than 200 stations, 1951-2001 baseline period); (b) the high-frequency 10-minutes precipitation depths of the hydro meteorological network (more than 30 stations, 15 to 33 years baseline period). For the station of Uccle, an uninterrupted time-series of more than one hundred years of 10-minutes rainfall data is available. The proposed technique for assessing the curves is based on maximum annual values of precipitation. A new analytical formula for the IDF-curves was developed such that these curves stay valid for aggregation times ranging from 10 minutes to 30 days (when fitted with appropriate data). Moreover, all parameters of this formula have physical dimensions. Finally, adequate spatial interpolation techniques are used to provide nationwide extreme values precipitation depths for short- to long-term durations With a given return period. These values are estimated on the grid points of the Belgian ALADIN-domain used in the operational weather forecasts at the RMIB.(Author)
TELECOMMUNICATIONS INFRASTRUCTURE AND GDP /JIPP CURVE/
Directory of Open Access Journals (Sweden)
Mariana Kaneva
2016-07-01
Full Text Available The relationship between telecommunications infrastructure and economic activity is under discussion in many scientific papers. Most of the authors use for research and analysis the Jipp curve. A lot of doubts about the correctness of the Jipp curve appear in terms of applying econometric models. The aim of this study is a review of the Jipp curve, refining the possibility of its application in modern conditions. The methodology used in the study is based on dynamic econometric models, including tests for nonstationarity and tests for causality. The focus of this study is directed to methodological problems in measuring the local density types of telecommunication networks. This study offers a specific methodology for assessing the Jipp law, through VAR-approach and Granger causality tests. It is proved that mechanical substitution of momentary aggregated variables (such as the number of subscribers of a telecommunication network at the end of the year and periodically aggregated variables (such as GDP per capita in the Jipp�s curve is methodologically wrong. Researchers have to reconsider the relationship set in the Jipp�s curve by including additional variables that characterize the Telecommunications sector and the economic activity in a particular country within a specified time period. GDP per capita should not be regarded as a single factor for the local density of telecommunications infrastructure. New econometric models studying the relationship between the investments in telecommunications infrastructure and economic development may be not only linear regression models, but also other econometric models. New econometric models should be proposed after testing and validating with sound economic theory and econometric methodology.
Trend analyses with river sediment rating curves
Warrick, Jonathan A.
2015-01-01
Sediment rating curves, which are fitted relationships between river discharge (Q) and suspended-sediment concentration (C), are commonly used to assess patterns and trends in river water quality. In many of these studies it is assumed that rating curves have a power-law form (i.e., C = aQb, where a and b are fitted parameters). Two fundamental questions about the utility of these techniques are assessed in this paper: (i) How well to the parameters, a and b, characterize trends in the data? (ii) Are trends in rating curves diagnostic of changes to river water or sediment discharge? As noted in previous research, the offset parameter, a, is not an independent variable for most rivers, but rather strongly dependent on b and Q. Here it is shown that a is a poor metric for trends in the vertical offset of a rating curve, and a new parameter, â, as determined by the discharge-normalized power function [C = â (Q/QGM)b], where QGM is the geometric mean of the Q values sampled, provides a better characterization of trends. However, these techniques must be applied carefully, because curvature in the relationship between log(Q) and log(C), which exists for many rivers, can produce false trends in â and b. Also, it is shown that trends in â and b are not uniquely diagnostic of river water or sediment supply conditions. For example, an increase in â can be caused by an increase in sediment supply, a decrease in water supply, or a combination of these conditions. Large changes in water and sediment supplies can occur without any change in the parameters, â and b. Thus, trend analyses using sediment rating curves must include additional assessments of the time-dependent rates and trends of river water, sediment concentrations, and sediment discharge.
Part 5: Receiver Operating Characteristic Curve and Area under the Curve
Directory of Open Access Journals (Sweden)
Saeed Safari
2016-04-01
Full Text Available Multiple diagnostic tools are used by emergency physicians,every day. In addition, new tools are evaluated to obtainmore accurate methods and reduce time or cost of conventionalones. In the previous parts of this educationalseries, we described diagnostic performance characteristicsof diagnostic tests including sensitivity, specificity, positiveand negative predictive values, and likelihood ratios. Thereceiver operating characteristics (ROC curve is a graphicalpresentation of screening characteristics. ROC curve is usedto determine the best cutoff point and compare two or moretests or observers by measuring the area under the curve(AUC. In this part of our educational series, we explain ROCcurve and two methods to determine the best cutoff value.
On harmonic curvatures of a Frenet curve in Lorentzian space
International Nuclear Information System (INIS)
Kuelahci, Mihriban; Bektas, Mehmet; Erguet, Mahmut
2009-01-01
In this paper, we consider curves of AW(k)-type, 1 ≤ k ≤ 3, in Lorentzian space. We give curvature conditions of these kind of curves. Furthermore, we study harmonic curvatures of curves of AW(k)-type. We investigate that under what conditions AW(k)-type curves are helix. Some related theorems and corollaries are also proved.
49 CFR 213.59 - Elevation of curved track; runoff.
2010-10-01
... 49 Transportation 4 2010-10-01 2010-10-01 false Elevation of curved track; runoff. 213.59 Section... track; runoff. (a) If a curve is elevated, the full elevation shall be provided throughout the curve, unless physical conditions do not permit. If elevation runoff occurs in a curve, the actual minimum...
The spatial profile of visual attention in mental curve tracing
Scholte, H. S.; Spekreijse, H.; Roelfsema, P. R.
2001-01-01
In a curve-tracing task, subjects have to judge whether items are located on a single, continuous curve. Spatially separate segments of such a curve are related to each other through grouping criteria, like collinearity and connectedness. These grouping cues need to be exploited during curve
R-curve behaviour of ferroelectric ceramics
International Nuclear Information System (INIS)
Egorov, N.Ya.; Kramarov, S.O.
2004-01-01
The attempt's made to identify and evaluate the regularities of developing the fractures in the ferroelectric ceramics and also-study the effect of the polishing operation on the strength characteristics of the piezoceramics. The R-curve behaviour in the ferroelectric ceramics is studied on the samples of the barium titanate and lead zirconate-titanate by the four-point bending with controlled surface fractures. It is established that increasing curve of resistance to the fracture growth is observed in the piezoceramics under the conditions of the fracture stable growth. The results obtained on the polished samples prove that the mechanical processing introduces the compression surface stresses into the piezoceramic materials [ru
Graphical evaluation of complexometric titration curves.
Guinon, J L
1985-04-01
A graphical method, based on logarithmic concentration diagrams, for construction, without any calculations, of complexometric titration curves is examined. The titration curves obtained for different kinds of unidentate, bidentate and quadridentate ligands clearly show why only chelating ligands are usually used in titrimetric analysis. The method has also been applied to two practical cases where unidentate ligands are used: (a) the complexometric determination of mercury(II) with halides and (b) the determination of cyanide with silver, which involves both a complexation and a precipitation system; for this purpose construction of the diagrams for the HgCl(2)/HgCl(+)/Hg(2+) and Ag(CN)(2)(-)/AgCN/CN(-) systems is considered in detail.
On quadratic residue codes and hyperelliptic curves
Directory of Open Access Journals (Sweden)
David Joyner
2008-01-01
Full Text Available For an odd prime p and each non-empty subset S⊂GF(p, consider the hyperelliptic curve X S defined by y 2 =f S (x, where f S (x = ∏ a∈S (x-a. Using a connection between binary quadratic residue codes and hyperelliptic curves over GF(p, this paper investigates how coding theory bounds give rise to bounds such as the following example: for all sufficiently large primes p there exists a subset S⊂GF(p for which the bound |X S (GF(p| > 1.39p holds. We also use the quasi-quadratic residue codes defined below to construct an example of a formally self-dual optimal code whose zeta function does not satisfy the ``Riemann hypothesis.''
Geometry of curves and surfaces with Maple
Rovenski, Vladimir
2000-01-01
This concise text on geometry with computer modeling presents some elementary methods for analytical modeling and visualization of curves and surfaces. The author systematically examines such powerful tools as 2-D and 3-D animation of geometric images, transformations, shadows, and colors, and then further studies more complex problems in differential geometry. Well-illustrated with more than 350 figures---reproducible using Maple programs in the book---the work is devoted to three main areas: curves, surfaces, and polyhedra. Pedagogical benefits can be found in the large number of Maple programs, some of which are analogous to C++ programs, including those for splines and fractals. To avoid tedious typing, readers will be able to download many of the programs from the Birkhauser web site. Aimed at a broad audience of students, instructors of mathematics, computer scientists, and engineers who have knowledge of analytical geometry, i.e., method of coordinates, this text will be an excellent classroom resource...
Analysis of threshold curves for superconducting interferometers
International Nuclear Information System (INIS)
Peterson, R.L.; Hamilton, C.A.
1979-01-01
Threshold curves for multijunction superconducting interferometers have been calculated previously, showing general agreement with observed features, especially in symmetric cases. We here add some more details to the analysis, paying particular attention to the effects of asymmetries in coupling, inductance, or critical currents. Feed-loop inductance and flux quantization in the feed loop can be important. A changing lobe pattern over many periods, asymmetries within a period, shifting patterns between runs spanning a warm-up, and sudden changes in pattern because of noise in the environment are all quantitatively explainable on the basis of this model. By use of a single ''calibration curve'', the inductance for symmetric two- or three-junction interferometers can be obtained immediately
Estimation of curve number by DAWAST model
Energy Technology Data Exchange (ETDEWEB)
Kim, Tai Cheol; Park, Seung Ki; Moon, Jong Pil [Chungnam National University, Taejon (Korea, Republic of)
1997-10-31
It is one of the most important factors to determine the effective rainfall for estimation of flood hydrograph in design schedule. SCS curve number (CN) method has been frequently used to estimate the effective rainfall of synthesized design flood hydrograph for hydraulic structures. But, it should be cautious to apply SCS-CN originally developed in U.S.A to watersheds in Korea, because characteristics of watersheds in Korea and cropping patterns especially like a paddy land cultivation are quite different from those in USA. New CN method has been introduced. Maximum storage capacity which was herein defined as U{sub max} can be calibrated from the stream flow data and converted to new CN-I of driest condition of soil moisture in the given watershed. Effective rainfall for design flood hydrograph can be estimated by the curve number developed in the watersheds in Korea. (author). 14 refs., 5 tabs., 3 figs.
An approach to averaging digitized plantagram curves.
Hawes, M R; Heinemeyer, R; Sovak, D; Tory, B
1994-07-01
The averaging of outline shapes of the human foot for the purposes of determining information concerning foot shape and dimension within the context of comfort of fit of sport shoes is approached as a mathematical problem. An outline of the human footprint is obtained by standard procedures and the curvature is traced with a Hewlett Packard Digitizer. The paper describes the determination of an alignment axis, the identification of two ray centres and the division of the total curve into two overlapping arcs. Each arc is divided by equiangular rays which intersect chords between digitized points describing the arc. The radial distance of each ray is averaged within groups of foot lengths which vary by +/- 2.25 mm (approximately equal to 1/2 shoe size). The method has been used to determine average plantar curves in a study of 1197 North American males (Hawes and Sovak 1993).
Daylight calculations using constant luminance curves
Energy Technology Data Exchange (ETDEWEB)
Betman, E. [CRICYT, Mendoza (Argentina). Laboratorio de Ambiente Humano y Vivienda
2005-02-01
This paper presents a simple method to manually estimate daylight availability and to make daylight calculations using constant luminance curves calculated with local illuminance and irradiance data and the all-weather model for sky luminance distribution developed in the Atmospheric Science Research Center of the University of New York (ARSC) by Richard Perez et al. Work with constant luminance curves has the advantage that daylight calculations include the problem's directionality and preserve the information of the luminous climate of the place. This permits accurate knowledge of the resource and a strong basis to establish conclusions concerning topics related to the energy efficiency and comfort in buildings. The characteristics of the proposed method are compared with the method that uses the daylight factor. (author)
Curvature Entropy for Curved Profile Generation
Directory of Open Access Journals (Sweden)
Koichiro Sato
2012-03-01
Full Text Available In a curved surface design, the overall shape features that emerge from combinations of shape elements are important. However, controlling the features of the overall shape in curved profiles is difficult using conventional microscopic shape information such as dimension. Herein two types of macroscopic shape information, curvature entropy and quadrature curvature entropy, quantitatively represent the features of the overall shape. The curvature entropy is calculated by the curvature distribution, and represents the complexity of a shape (one of the overall shape features. The quadrature curvature entropy is an improvement of the curvature entropy by introducing a Markov process to evaluate the continuity of a curvature and to approximate human cognition of the shape. Additionally, a shape generation method using a genetic algorithm as a calculator and the entropy as a shape generation index is presented. Finally, the applicability of the proposed method is demonstrated using the side view of an automobile as a design example.
Gauge field configurations in curved spacetimes (II)
International Nuclear Information System (INIS)
Boutaleb-Joutei, H.; Chakrabarti, A.; Comtet, A.
1979-05-01
One continues the study of gauge field configurations in curved spaces, using the formalism and results of a previous paper. A class of static, finite action, selfdual solutions of SU(2) gauge fields on a Euclidean section of de Sitter space is presented. The action depends on a continuous parameter. The spin connection solution is obtained as a particular case and a certain passage to the limiting case of a flat space is shown to reproduce the Euclidean Prasad-Sommerfield solution. The significance and possible interest of such solutions are discussed. The results are then generalized to a non-Einstein but conformally flat space, including de Sitter space as an Einstein limit. Next Baecklund type transformations are constructed starting from selfduality constraints for such curved spaces. These transformations are applied to the above mentioned solutions. The last two sections contain remarks on solutions with a background Robinson-Bertotti metric and on static, axially symmetric solutions respectively
Point- and curve-based geometric conflation
Ló pez-Vá zquez, C.; Manso Callejo, M.A.
2013-01-01
Geometric conflation is the process undertaken to modify the coordinates of features in dataset A in order to match corresponding ones in dataset B. The overwhelming majority of the literature considers the use of points as features to define the transformation. In this article we present a procedure to consider one-dimensional curves also, which are commonly available as Global Navigation Satellite System (GNSS) tracks, routes, coastlines, and so on, in order to define the estimate of the displacements to be applied to each object in A. The procedure involves three steps, including the partial matching of corresponding curves, the computation of some analytical expression, and the addition of a correction term in order to satisfy basic cartographic rules. A numerical example is presented. © 2013 Copyright Taylor and Francis Group, LLC.
Pathophysiological Characteristics Underlying Different Glucose Response Curves
DEFF Research Database (Denmark)
Hulman, Adam; Witte, Daniel R; Vistisen, Dorte
2018-01-01
different glucose curve patterns and studied their stability and reproducibility over 3 years of follow-up. RESEARCH DESIGN AND METHODS: We analyzed data from participants without diabetes from the observational cohort from the European Group for the Study of Insulin Resistance: Relationship between Insulin...... and secretion. The glucose patterns identified at follow-up were similar to those at baseline, suggesting that the latent class method is robust. We integrated our classification model into an easy-to-use online application that facilitates the assessment of glucose curve patterns for other studies. CONCLUSIONS...... Sensitivity and Cardiovascular Disease study; participants had a five-time point OGTT at baseline (n = 1,443) and after 3 years (n = 1,045). Measures of insulin sensitivity and secretion were assessed at baseline with a euglycemic-hyperinsulinemic clamp and intravenous glucose tolerance test. Heterogeneous...
Yield stress independent column buckling curves
DEFF Research Database (Denmark)
Stan, Tudor‐Cristian; Jönsson, Jeppe
2017-01-01
of the yield stress is to some inadequate degree taken into account in the Eurocode by specifying that steel grades of S460 and higher all belong to a common set of “raised” buckling curves. This is not satisfying as it can be shown theoretically that the current Eurocode formulation misses an epsilon factor......Using GMNIA and shell finite element modelling of steel columns it is ascertained that the buckling curves for given imperfections and residual stresses are not only dependent on the relative slenderness ratio and the cross section shape but also on the magnitude of the yield stress. The influence...... in the definition of the normalised imperfection magnitudes. By introducing this factor it seems that the GMNIA analysis and knowledge of the independency of residual stress levels on the yield stress can be brought together and give results showing consistency between numerical modelling and a simple modified...
Curved butterfly bileaflet prosthetic cardiac valve
McQueen, David M.; Peskin, Charles S.
1991-06-25
An annular valve body having a central passageway for the flow of blood therethrough with two curved leaflets each of which is pivotally supported on an accentric positioned axis in the central passageway for moving between a closed position and an open position. The leaflets are curved in a plane normal to the eccentric axis and positioned with the convex side of the leaflets facing each other when the leaflets are in the open position. Various parameters such as the curvature of the leaflets, the location of the eccentric axis, and the maximum opening angle of the leaflets are optimized according to the following performance criteria: maximize the minimum peak velocity through the valve, maximize the net stroke volume, and minimize the mean forward pressure difference, thereby reducing thrombosis and improving the hemodynamic performance.
The Green functions in curved spacetime
International Nuclear Information System (INIS)
Buchbinder, I.L.; Kirillova, E.N.; Odinstov, S.D.
1987-01-01
The theory of a free scalar field with conformal coupling in curved spacetime with some special metrics is considered. The integral representations for the green function G-tilde in the form of integrals with Schwinger-De Witt kernel over contours in the complex plane of proper time are obtained. It is shown how the transitions from a unique Green function in Euclidean space to different Green functions in Minkowski space and vice versa can be carried out. (author)
Advection endash diffusion around a curved obstacle
International Nuclear Information System (INIS)
Ahluwalia, D.S.; Keller, J.B.; Knessl, C.
1998-01-01
Advection and diffusion of a substance around a curved obstacle is analyzed when the advection velocity is large compared to the diffusion velocity, i.e., when the Peclet number is large. Asymptotic expressions for the concentration are obtained by the use of boundary layer theory, matched asymptotic expansions, etc. The results supplement and extend previous ones for straight obstacles. They apply to electrophoresis, the flow of ground water, chromatography, sedimentation, etc. copyright 1998 American Institute of Physics
The Astral Curved Disc of Chevroches (France)
Devevey, F. Rousseau, A.
2009-08-01
The excavation of the unexplored secondary agglomeration in Chevroches (Nièvre), from 2001 to 2002, directed by F. Devevey (INRAP), has led to the discovery of an astrological bronze curved disc of a type unknown in the ancient world; it is inscribed with three lines in Greek transcribing Egyptian an Roman months, and the twelve signs of the zodiac. This article presents the first observations.
Structural properties of the Hugoniot curve
International Nuclear Information System (INIS)
Chaisse, F.
2002-01-01
This report is devoted to the structural properties analysis of the HUGONIOT curve, independently of the equation of state (E 0 S) display. The general properties so coming out are applied to the shock waves interacting studies. When phase transitions are present we investigate the splitting of shock waves and also the rarefaction waves. To end with, we present the shock instabilities and the non-uniqueness of solutions when specific E 0 S are present. (author)
SPOTTED STAR LIGHT CURVES WITH ENHANCED PRECISION
International Nuclear Information System (INIS)
Wilson, R. E.
2012-01-01
The nearly continuous timewise coverage of recent photometric surveys is free of the large gaps that compromise attempts to follow starspot growth and decay as well as motions, thereby giving incentive to improve computational precision for modeled spots. Due to the wide variety of star systems in the surveys, such improvement should apply to light/velocity curve models that accurately include all the main phenomena of close binaries and rotating single stars. The vector fractional area (VFA) algorithm that is introduced here represents surface elements by small sets of position vectors so as to allow accurate computation of circle-triangle overlap by spherical geometry. When computed by VFA, spots introduce essentially no noticeable scatter in light curves at the level of one part in 10,000. VFA has been put into the Wilson-Devinney light/velocity curve program and all logic and mathematics are given so as to facilitate entry into other such programs. Advantages of precise spot computation include improved statistics of spot motions and aging, reduced computation time (intrinsic precision relaxes needs for grid fineness), noise-free illustration of spot effects in figures, and help in guarding against false positives in exoplanet searches, where spots could approximately mimic transiting planets in unusual circumstances. A simple spot growth and decay template quantifies time profiles, and specifics of its utilization in differential corrections solutions are given. Computational strategies are discussed, the overall process is tested in simulations via solutions of synthetic light curve data, and essential simulation results are described. An efficient time smearing facility by Gaussian quadrature can deal with Kepler mission data that are in 30 minute time bins.
Quantum field theory in curved spacetime
International Nuclear Information System (INIS)
Gibbons, G.W.
1978-04-01
The purpose of this article is to outline what the extension of such a treatment to curved space entails and to discuss what essentially new features arise when one takes into account the quantum mechanical nature of gravitating systems. I shall throughout assume a classical, unquantized gravitational field and confine the discussion to matter fields although similar techniques and ideas may be applied to 'gravitons' - that is linearized perturbations of the metric propagating on some fixed, unperturbed, background. (orig./WL) [de
Robotic Mitral Valve Repair: The Learning Curve.
Goodman, Avi; Koprivanac, Marijan; Kelava, Marta; Mick, Stephanie L; Gillinov, A Marc; Rajeswaran, Jeevanantham; Brzezinski, Anna; Blackstone, Eugene H; Mihaljevic, Tomislav
Adoption of robotic mitral valve surgery has been slow, likely in part because of its perceived technical complexity and a poorly understood learning curve. We sought to correlate changes in technical performance and outcome with surgeon experience in the "learning curve" part of our series. From 2006 to 2011, two surgeons undertook robotically assisted mitral valve repair in 458 patients (intent-to-treat); 404 procedures were completed entirely robotically (as-treated). Learning curves were constructed by modeling surgical sequence number semiparametrically with flexible penalized spline smoothing best-fit curves. Operative efficiency, reflecting technical performance, improved for (1) operating room time for case 1 to cases 200 (early experience) and 400 (later experience), from 414 to 364 to 321 minutes (12% and 22% decrease, respectively), (2) cardiopulmonary bypass time, from 148 to 102 to 91 minutes (31% and 39% decrease), and (3) myocardial ischemic time, from 119 to 75 to 68 minutes (37% and 43% decrease). Composite postoperative complications, reflecting safety, decreased from 17% to 6% to 2% (63% and 85% decrease). Intensive care unit stay decreased from 32 to 28 to 24 hours (13% and 25% decrease). Postoperative stay fell from 5.2 to 4.5 to 3.8 days (13% and 27% decrease). There were no in-hospital deaths. Predischarge mitral regurgitation of less than 2+, reflecting effectiveness, was achieved in 395 (97.8%), without correlation to experience; return-to-work times did not change substantially with experience. Technical efficiency of robotic mitral valve repair improves with experience and permits its safe and effective conduct.
Hydrogen technologies and the technology learning curve
International Nuclear Information System (INIS)
Rogner, H.-H.
1998-01-01
On their bumpy road to commercialization, hydrogen production, delivery and conversion technologies not only require dedicated research, development and demonstration efforts, but also protected niche markets and early adopters. While niche markets utilize the unique technological properties of hydrogen, adopters exhibit a willingness to pay a premium for hydrogen fueled energy services. The concept of the technology learning curve is applied to estimate the capital requirements associated with the commercialization process of several hydrogen technologies. (author)
Growth curve models and statistical diagnostics
Pan, Jian-Xin
2002-01-01
Growth-curve models are generalized multivariate analysis-of-variance models. These models are especially useful for investigating growth problems on short times in economics, biology, medical research, and epidemiology. This book systematically introduces the theory of the GCM with particular emphasis on their multivariate statistical diagnostics, which are based mainly on recent developments made by the authors and their collaborators. The authors provide complete proofs of theorems as well as practical data sets and MATLAB code.
News Impact Curve for Stochastic Volatility Models
Makoto Takahashi; Yasuhiro Omori; Toshiaki Watanabe
2012-01-01
This paper proposes a new method to compute the news impact curve for stochastic volatility (SV) models. The new method incorporates the joint movement of return and volatility, which has been ignored by the extant literature, by simply adding a couple of steps to the Bayesian MCMC estimation procedures for SV models. This simple procedure is versatile and applicable to various SV type models. Contrary to the monotonic news impact functions in the extant literature, the new method gives a U-s...
Bezier Curve Modeling for Neutrosophic Data Problem
Directory of Open Access Journals (Sweden)
Ferhat Tas
2017-02-01
Full Text Available Neutrosophic set concept is defined with membership, non-membership and indeterminacy degrees. This concept is the solution and representation of the problems with various fields. In this paper, a geometric model is introduced for Neutrosophic data problem for the first time. This model is based on neutrosophic sets and neutrosophic relations. Neutrosophic control points are defined according to these points, resulting in neutrosophic Bezier curves.
Feynman propagator in curved space-time
International Nuclear Information System (INIS)
Candelas, P.; Raine, D.J.
1977-01-01
The Wick rotation is generalized in a covariant manner so as to apply to curved manifolds in a way that is independent of the analytic properties of the manifold. This enables us to show that various methods for defining a Feynman propagator to be found in the literature are equivalent where they are applicable. We are also able to discuss the relation between certain regularization methods that have been employed
Mannheim Curves in Nonflat 3-Dimensional Space Forms
Directory of Open Access Journals (Sweden)
Wenjing Zhao
2015-01-01
Full Text Available We consider the Mannheim curves in nonflat 3-dimensional space forms (Riemannian or Lorentzian and we give the concept of Mannheim curves. In addition, we investigate the properties of nonnull Mannheim curves and their partner curves. We come to the conclusion that a necessary and sufficient condition is that a linear relationship with constant coefficients will exist between the curvature and the torsion of the given original curves. In the case of null curve, we reveal that there are no null Mannheim curves in the 3-dimensional de Sitter space.
Development of a statistically-based lower bound fracture toughness curve (Ksub(IR) curve)
International Nuclear Information System (INIS)
Wullaert, R.A.; Server, W.L.; Oldfield, W.; Stahlkopf, K.E.
1977-01-01
A program of initiation fracture toughness measurements on fifty heats of nuclear pressure vessel production materials (including weldments) was used to develop a methodology for establishing a revised reference toughness curve. The new methodology was statistically developed and provides a predefined confidence limit (or tolerance limit) for fracture toughness based upon many heats of a particular type of material. Overall reference curves were developed for seven specific materials using large specimen static and dynamic fracture toughness results. The heat-to-heat variation was removed by normalizing both the fracture toughness and temperature data with the precracked Charpy tanh curve coefficients for each particular heat. The variance and distribution about the curve were determined, and lower bounds of predetermined statistical significance were drawn based upon a Pearson distribution in the lower shelf region (since the data were skewed to high values) and a t-distribution in the transition temperature region (since the data were normally distributed)
A learning curve for solar thermal power
Platzer, Werner J.; Dinter, Frank
2016-05-01
Photovoltaics started its success story by predicting the cost degression depending on cumulated installed capacity. This so-called learning curve was published and used for predictions for PV modules first, then predictions of system cost decrease also were developed. This approach is less sensitive to political decisions and changing market situations than predictions on the time axis. Cost degression due to innovation, use of scaling effects, improved project management, standardised procedures including the search for better sites and optimization of project size are learning effects which can only be utilised when projects are developed. Therefore a presentation of CAPEX versus cumulated installed capacity is proposed in order to show the possible future advancement of the technology to politics and market. However from a wide range of publications on cost for CSP it is difficult to derive a learning curve. A logical cost structure for direct and indirect capital expenditure is needed as the basis for further analysis. Using derived reference cost for typical power plant configurations predictions of future cost have been derived. Only on the basis of that cost structure and the learning curve levelised cost of electricity for solar thermal power plants should be calculated for individual projects with different capacity factors in various locations.
J-holomorphic curves and quantum cohomology
McDuff, Dusa
1994-01-01
J-holomorphic curves revolutionized the study of symplectic geometry when Gromov first introduced them in 1985. Through quantum cohomology, these curves are now linked to many of the most exciting new ideas in mathematical physics. This book presents the first coherent and full account of the theory of J-holomorphic curves, the details of which are presently scattered in various research papers. The first half of the book is an expository account of the field, explaining the main technical aspects. McDuff and Salamon give complete proofs of Gromov's compactness theorem for spheres and of the existence of the Gromov-Witten invariants. The second half of the book focuses on the definition of quantum cohomology. The authors establish that this multiplication exists, and give a new proof of the Ruan-Tian result that is associative on appropriate manifolds. They then describe the Givental-Kim calculation of the quantum cohomology of flag manifolds, leading to quantum Chern classes and Witten's calculation for Gras...
The free Maxwell field in curved spacetime
International Nuclear Information System (INIS)
Kueskue, M.
2001-09-01
The aim of this thesis is to discuss quantizations of the free Maxwell field in flat and curved spacetimes. First we introduce briefly some notions from tensor analysis and the causal structure of spacetime. As an introduction to the main topic, we review some aspects of the two axiomatic quantum field theories, Wightman theory and algebraic quantum field theory. We also give an introduction into concepts of the quantization of fields on curved spacetime backgrounds. Then the wave equation and quantization of the Maxwell field in flat spacetimes is discussed. It follows a review of J. Dimock's quantization of the Maxwell field on curved spacetimes and then we come to our main result: We show explicitly that the Maxwell field, defined by dF=0 and δF=0, has a well posed initial value formulation on arbitrary globally hyperbolic spacetime manifolds. We prove the existence and uniqueness of fundamental solutions without employing a vector potential. Thus our solution is also applicable to spacetimes not satisfying the Poincare lemma and should lead to a quantization of the Maxwell field on non-trivial spacetime backgrounds. This in turn provides the opportunity to investigate physical states on non-trivial spacetime-topologies and could lead to the discovery of new quantum phenomena. (orig.)
Shape optimization of self-avoiding curves
Walker, Shawn W.
2016-04-01
This paper presents a softened notion of proximity (or self-avoidance) for curves. We then derive a sensitivity result, based on shape differential calculus, for the proximity. This is combined with a gradient-based optimization approach to compute three-dimensional, parameterized curves that minimize the sum of an elastic (bending) energy and a proximity energy that maintains self-avoidance by a penalization technique. Minimizers are computed by a sequential-quadratic-programming (SQP) method where the bending energy and proximity energy are approximated by a finite element method. We then apply this method to two problems. First, we simulate adsorbed polymer strands that are constrained to be bound to a surface and be (locally) inextensible. This is a basic model of semi-flexible polymers adsorbed onto a surface (a current topic in material science). Several examples of minimizing curve shapes on a variety of surfaces are shown. An advantage of the method is that it can be much faster than using molecular dynamics for simulating polymer strands on surfaces. Second, we apply our proximity penalization to the computation of ideal knots. We present a heuristic scheme, utilizing the SQP method above, for minimizing rope-length and apply it in the case of the trefoil knot. Applications of this method could be for generating good initial guesses to a more accurate (but expensive) knot-tightening algorithm.
Numerical Characterization of Piezoceramics Using Resonance Curves
Pérez, Nicolás; Buiochi, Flávio; Brizzotti Andrade, Marco Aurélio; Adamowski, Julio Cezar
2016-01-01
Piezoelectric materials characterization is a challenging problem involving physical concepts, electrical and mechanical measurements and numerical optimization techniques. Piezoelectric ceramics such as Lead Zirconate Titanate (PZT) belong to the 6 mm symmetry class, which requires five elastic, three piezoelectric and two dielectric constants to fully represent the material properties. If losses are considered, the material properties can be represented by complex numbers. In this case, 20 independent material constants are required to obtain the full model. Several numerical methods have been used to adjust the theoretical models to the experimental results. The continuous improvement of the computer processing ability has allowed the use of a specific numerical method, the Finite Element Method (FEM), to iteratively solve the problem of finding the piezoelectric constants. This review presents the recent advances in the numerical characterization of 6 mm piezoelectric materials from experimental electrical impedance curves. The basic strategy consists in measuring the electrical impedance curve of a piezoelectric disk, and then combining the Finite Element Method with an iterative algorithm to find a set of material properties that minimizes the difference between the numerical impedance curve and the experimental one. Different methods to validate the results are also discussed. Examples of characterization of some common piezoelectric ceramics are presented to show the practical application of the described methods. PMID:28787875
Detection of flaws below curved surfaces
International Nuclear Information System (INIS)
Elsley, R.K.; Addison, R.C.; Graham, L.J.
1983-01-01
A measurement model has been developed to describe ultrasonic measurements made with circular piston transducers in parts with flat or cylindrically curved surfaces. The model includes noise terms to describe electrical noise, scatterer noise and echo noise as well as effects of attenuation, diffraction and Fresnel loss. An experimental procedure for calibrating the noise terms of the model was developed. Experimental measurements were made on a set of known flaws located beneath a cylindrically curved surface. The model was verified by using it to correct the experimental measurements to obtain the absolute scattering amplitude of the flaws. For longitudinal wave propagation within the part, the derived scattering amplitudes were consistent with predictions at internal angles of less than 30 0 . At larger angles, focusing and aberrations caused a lack of agreement; the model needs further refinement in this case. For shear waves, it was found that the frequency for optimum flaw detection in the presence of material noise is lower than that for longitudinal waves; lower frequency measurements are currently in progress. The measurement model was then used to make preliminary predictions of the best experimental measurement technique for the detection of cracks located under cylindrically curved surfaces
Prospects for PV: a learning curve analysis
International Nuclear Information System (INIS)
Zwaan, Bob van der; Rabi, A.
2003-01-01
This article gives an overview of the current state-of-the-art of photovoltaic electricity technology, and addresses its potential for cost reductions over the first few decades of the 21st century. Current PV production cost ranges are presented, both in terms of capacity installation and electricity generation, of single crystalline silicon, multi-crystalline silicon, amorphous silicon and other thin film technologies. Possible decreases of these costs are assessed, as expected according to the learning-curve methodology. We also estimate how much PV could gain if external costs (due to environmental and health damage) of energy were internalised, for example by an energy tax. Our conclusions are that, (1) mainly due its high costs, PV electricity is unlikely to play a major role in global energy supply and carbon emissions abatement before 2020, (2) extrapolating learning curves observed in the past, one can expect its costs to decrease significantly over the coming years, so that a considerable PV electricity share world-wide could materialise after 2020, (3) niche-market applications, e.g. using stand-alone systems in remote areas, are crucial for continuing 'the ride along the learning curve', (4) damage costs of conventional (fossil) power sources are considerable, and their internalisation would improve the competitiveness of PV, although probably not enough to close the current cost gap. (author)
Serial position curves in free recall.
Laming, Donald
2010-01-01
The scenario for free recall set out in Laming (2009) is developed to provide models for the serial position curves from 5 selected sets of data, for final free recall, and for multitrial free recall. The 5 sets of data reflect the effects of rate of presentation, length of list, delay of recall, and suppression of rehearsal. Each model accommodates the serial position curve for first recalls (where those data are available) as well as that for total recalls. Both curves are fit with the same parameter values, as also (with 1 exception) are all of the conditions compared within each experiment. The distributions of numbers of recalls are also examined and shown to have variances increased above what would be expected if successive recalls were independent. This is taken to signify that, in those experiments in which rehearsals were not recorded, the retrieval of words for possible recall follows the same pattern that is observed following overt rehearsal, namely, that retrieval consists of runs of consecutive elements from memory. Finally, 2 sets of data are examined that the present approach cannot accommodate. It is argued that the problem with these data derives from an interaction between the patterns of (covert) rehearsal and the parameters of list presentation.
Learning curve for radical retropubic prostatectomy
Directory of Open Access Journals (Sweden)
Fernando J. A. Saito
2011-02-01
Full Text Available PURPOSE: The learning curve is a period in which the surgical procedure is performed with difficulty and slowness, leading to a higher risk of complications and reduced effectiveness due the surgeon's inexperience. We sought to analyze the residents' learning curve for open radical prostatectomy (RP in a training program. MATERIALS AND METHODS: We conducted a prospective study from June 2006 to January 2008 in the academic environment of the University of São Paulo. Five residents operated on 184 patients during a four-month rotation in the urologic oncology division, mentored by the same physician assistants. We performed sequential analyses according to the number of surgeries, as follows: = 10, 11 to 19, 20 to 28, and = 29. RESULTS: The residents performed an average of 37 RP each. The average psa was 9.3 ng/mL and clinical stage T1c in 71% of the patients. The pathological stage was pT2 (73%, pT3 (23%, pT4 (4%, and 46% of the patients had a Gleason score 7 or higher. In all surgeries, the average operative time and estimated blood loss was 140 minutes and 488 mL. Overall, 7.2% of patients required blood transfusion, and 23% had positive surgical margins. CONCLUSION: During the initial RP learning curve, we found a significant reduction in the operative time; blood transfusion during the procedures and positive surgical margin rate were stable in our series.
Incorporating Experience Curves in Appliance Standards Analysis
Energy Technology Data Exchange (ETDEWEB)
Garbesi, Karina; Chan, Peter; Greenblatt, Jeffery; Kantner, Colleen; Lekov, Alex; Meyers, Stephen; Rosenquist, Gregory; Buskirk, Robert Van; Yang, Hung-Chia; Desroches, Louis-Benoit
2011-10-31
The technical analyses in support of U.S. energy conservation standards for residential appliances and commercial equipment have typically assumed that manufacturing costs and retail prices remain constant during the projected 30-year analysis period. There is, however, considerable evidence that this assumption does not reflect real market prices. Costs and prices generally fall in relation to cumulative production, a phenomenon known as experience and modeled by a fairly robust empirical experience curve. Using price data from the Bureau of Labor Statistics, and shipment data obtained as part of the standards analysis process, we present U.S. experience curves for room air conditioners, clothes dryers, central air conditioners, furnaces, and refrigerators and freezers. These allow us to develop more representative appliance price projections than the assumption-based approach of constant prices. These experience curves were incorporated into recent energy conservation standards for these products. The impact on the national modeling can be significant, often increasing the net present value of potential standard levels in the analysis. In some cases a previously cost-negative potential standard level demonstrates a benefit when incorporating experience. These results imply that past energy conservation standards analyses may have undervalued the economic benefits of potential standard levels.
Microvascular Anastomosis: Proposition of a Learning Curve.
Mokhtari, Pooneh; Tayebi Meybodi, Ali; Benet, Arnau; Lawton, Michael T
2018-04-14
Learning to perform a microvascular anastomosis is one of the most difficult tasks in cerebrovascular surgery. Previous studies offer little regarding the optimal protocols to maximize learning efficiency. This failure stems mainly from lack of knowledge about the learning curve of this task. To delineate this learning curve and provide information about its various features including acquisition, improvement, consistency, stability, and recall. Five neurosurgeons with an average surgical experience history of 5 yr and without any experience in bypass surgery performed microscopic anastomosis on progressively smaller-caliber silastic tubes (Biomet, Palm Beach Gardens, Florida) during 24 consecutive sessions. After a 1-, 2-, and 8-wk retention interval, they performed recall test on 0.7-mm silastic tubes. The anastomoses were rated based on anastomosis patency and presence of any leaks. Improvement rate was faster during initial sessions compared to the final practice sessions. Performance decline was observed in the first session of working on a smaller-caliber tube. However, this rapidly improved during the following sessions of practice. Temporary plateaus were seen in certain segments of the curve. The retention interval between the acquisition and recall phase did not cause a regression to the prepractice performance level. Learning the fine motor task of microvascular anastomosis adapts to the basic rules of learning such as the "power law of practice." Our results also support the improvement of performance during consecutive sessions of practice. The objective evidence provided may help in developing optimized learning protocols for microvascular anastomosis.
Modeling Patterns of Activities using Activity Curves.
Dawadi, Prafulla N; Cook, Diane J; Schmitter-Edgecombe, Maureen
2016-06-01
Pervasive computing offers an unprecedented opportunity to unobtrusively monitor behavior and use the large amount of collected data to perform analysis of activity-based behavioral patterns. In this paper, we introduce the notion of an activity curve , which represents an abstraction of an individual's normal daily routine based on automatically-recognized activities. We propose methods to detect changes in behavioral routines by comparing activity curves and use these changes to analyze the possibility of changes in cognitive or physical health. We demonstrate our model and evaluate our change detection approach using a longitudinal smart home sensor dataset collected from 18 smart homes with older adult residents. Finally, we demonstrate how big data-based pervasive analytics such as activity curve-based change detection can be used to perform functional health assessment. Our evaluation indicates that correlations do exist between behavior and health changes and that these changes can be automatically detected using smart homes, machine learning, and big data-based pervasive analytics.
Statistical and biophysical aspects of survival curve
International Nuclear Information System (INIS)
Kellerer, A.M.
1980-01-01
Statistic fluctuation in a series of consequently taken survival curves of asynchronous cells of a hamster of the V79 line during X-ray irradiation, are considered. In each of the experiments fluctuations are close to those expected on the basis of the Poisson distribution. The fluctuation of cell sensitivity in different experiments of one series can reach 10%. The normalization of each experiment in mean values permits to obtain the ''idealized'' survival curve. The survival logarithm in this curve is proportional to the absorbed dose and its square only at low radiation doses. Such proportionality in V lab 79 cells in the late S-phase is observed at all doses. Using the microdosimetric approach, the distance where the interaction of radiolysis products or subinjury takes place to make the dependence of injury on the dose non-linear, is determined. In the case of interaction distances of 10-100 nm, the linear component is shown to become comparable in value with the linear injury component at doses of the order of several hundred rad only in the case, when the interaction distance is close to micrometre [ru
Wheelset curving guidance using H∞ control
Qazizadeh, Alireza; Stichel, Sebastian; Feyzmahdavian, Hamid Reza
2018-03-01
This study shows how to design an active suspension system for guidance of a rail vehicle wheelset in curve. The main focus of the study is on designing the controller and afterwards studying its effect on the wheel wear behaviour. The controller is designed based on the closed-loop transfer function shaping method and ? control strategy. The study discusses designing of the controller for both nominal and uncertain plants and considers both stability and performance. The designed controllers in Simulink are then applied to the vehicle model in Simpack to study the wheel wear behaviour in curve. The vehicle type selected for this study is a two-axle rail vehicle. This is because this type of vehicle is known to have very poor curving performance and high wheel wear. On the other hand, the relative simpler structure of this type of vehicle compared to bogie vehicles make it a more economic choice. Hence, equipping this type of vehicle with the active wheelset steering is believed to show high enough benefit to cost ratio to remain attractive to rail vehicle manufacturers and operators.
Numerical Characterization of Piezoceramics Using Resonance Curves
Directory of Open Access Journals (Sweden)
Nicolás Pérez
2016-01-01
Full Text Available Piezoelectric materials characterization is a challenging problem involving physical concepts, electrical and mechanical measurements and numerical optimization techniques. Piezoelectric ceramics such as Lead Zirconate Titanate (PZT belong to the 6 mm symmetry class, which requires five elastic, three piezoelectric and two dielectric constants to fully represent the material properties. If losses are considered, the material properties can be represented by complex numbers. In this case, 20 independent material constants are required to obtain the full model. Several numerical methods have been used to adjust the theoretical models to the experimental results. The continuous improvement of the computer processing ability has allowed the use of a specific numerical method, the Finite Element Method (FEM, to iteratively solve the problem of finding the piezoelectric constants. This review presents the recent advances in the numerical characterization of 6 mm piezoelectric materials from experimental electrical impedance curves. The basic strategy consists in measuring the electrical impedance curve of a piezoelectric disk, and then combining the Finite Element Method with an iterative algorithm to find a set of material properties that minimizes the difference between the numerical impedance curve and the experimental one. Different methods to validate the results are also discussed. Examples of characterization of some common piezoelectric ceramics are presented to show the practical application of the described methods.
Granados, I.; Calo, M.; Ramos, V.
2017-12-01
We developed a Matlab suite package (NDCP, Noisy Dispersion Curve Picking) that allows a full control over parameters to identify correctly group velocity dispersion curves in two types of datasets: correlograms between two stations or surface wave records from earthquakes. Using the frequency-time analysis (FTAN), the procedure to obtain the dispersion curves from records with a high noise level becomes difficult, and sometimes, the picked curve result in a misinterpreted character. For correlogram functions, obtained with cross-correlation of noise records or earthquake's coda, a non-homogeneous noise sources distribution yield to a non-symmetric Green's function (GF); to retrieve the complete information contained in there, NDCP allows to pick the dispersion curve in the time domain both in the causal and non-causal part of the GF. Then the picked dispersion curve is displayed on the FTAN diagram to in order to check if it matches with the maximum of the signal energy avoiding confusion with overtones or spike of noise. To illustrate how NDCP performs, we show exemple using: i) local correlograms functions obtained from sensors deployed into a volcanic caldera (Los Humeros, in Puebla, Mexico), ii) regional correlograms functions between two stations of the National Seismological Service (SSN, Servicio Sismológico Nacional in Spanish), and iii) surface wave seismic record for an earthquake located in the Pacific Ocean coast of Mexico and recorded by the SSN. This work is supported by the GEMEX project (Geothermal Europe-Mexico consortium).
Variation of curve number with storm depth
Banasik, K.; Hejduk, L.
2012-04-01
The NRCS Curve Number (known also as SCS-CN) method is well known as a tool in predicting flood runoff depth from small ungauged catchment. The traditional way of determination the CNs, based on soil characteristics, land use and hydrological conditions, seemed to have tendency to overpredict the floods in some cases. Over 30 year rainfall-runoff data, collected in two small (A=23.4 & 82.4 km2), lowland, agricultural catchments in Center of Poland (Banasik & Woodward 2010), were used to determine runoff Curve Number and to check a tendency of changing. The observed CN declines with increasing storm size, which according recent views of Hawkins (1993) could be classified as a standard response of watershed. The analysis concluded, that using CN value according to the procedure described in USDA-SCS Handbook one receives representative value for estimating storm runoff from high rainfall depths in the analyzes catchments. This has been confirmed by applying "asymptotic approach" for estimating the watershed curve number from the rainfall-runoff data. Furthermore, the analysis indicated that CN, estimated from mean retention parameter S of recorded events with rainfall depth higher than initial abstraction, is also approaching the theoretical CN. The observed CN, ranging from 59.8 to 97.1 and from 52.3 to 95.5, in the smaller and the larger catchment respectively, declines with increasing storm size, which has been classified as a standard response of watershed. The investigation demonstrated also changeability of the CN during a year, with much lower values during the vegetation season. Banasik K. & D.E. Woodward (2010). "Empirical determination of curve number for a small agricultural watrshed in Poland". 2nd Joint Federal Interagency Conference, Las Vegas, NV, June 27 - July 1, 2010 (http://acwi.gov/sos/pubs/2ndJFIC/Contents/10E_Banasik_ 28_02_10. pdf). Hawkins R. H. (1993). "Asymptotic determination of curve numbers from data". Journal of Irrigation and Drainage
Dose-response curves from incomplete data
International Nuclear Information System (INIS)
Groer, P.G.
1978-01-01
Frequently many different responses occur in populations (animal or human) exposed to ionizing radiation. To obtain a dose-response curve, the exposed population is first divided into sub-groups whose members received the same radiation dose. To estimate the response, the fraction of subjects in each sub-group that showed the particular response of interest is determined. These fractions are plotted against dose to give the dose-response curve. This procedure of plotting the fractions versus the radiation dose is not the correct way to estimate the time distribution for a particular response at the different dose levels. Other observed responses competed for the individuals in the exposed population and therefore prevented manifestation of the complete information on the response-time distribution for one specific response. Such data are called incomplete in the statistical literature. A procedure is described which uses the by now classical Kaplan-Meier estimator, to establish dose-response curves from incomplete data under the assumption that the different observed responses are statistically independent. It is demonstrated that there is insufficient information in the observed survival functions to estimate the time distribution for one particular response if the assumption of independence is dropped. In addition, it is not possible to determine from the data (i.e. type of response and when it occurred) whether or not the different response-time distributions are independent. However, it is possible to give sharp bounds between which the response has to lie. This implies that for incomplete data, only a 'dose-response band' can be established if independence of the competing responses cannot be assumed. Examples are given using actual data to illustrate the estimation procedures
Arithmetic fundamental groups and moduli of curves
International Nuclear Information System (INIS)
Makoto Matsumoto
2000-01-01
This is a short note on the algebraic (or sometimes called arithmetic) fundamental groups of an algebraic variety, which connects classical fundamental groups with Galois groups of fields. A large part of this note describes the algebraic fundamental groups in a concrete manner. This note gives only a sketch of the fundamental groups of the algebraic stack of moduli of curves. Some application to a purely topological statement, i.e., an obstruction to the subjectivity of Johnson homomorphisms in the mapping class groups, which comes from Galois group of Q, is explained. (author)
Twisted vector bundles on pointed nodal curves
Indian Academy of Sciences (India)
R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22
by identifying the points p1 and p2. If m ≥ 2, let R1,...,Rm−1 be m − 1 copies of the projective line P1 and let xi,yi be two distinct points in Ri. Let R be the nodal curve which arises from the union. R0 ⊔ R1 ⊔···⊔ Rm−1 ⊔ Rm by identifying p1 ∈ R0 and p2 ∈ Rm with x1 ∈ R1 and ym−1 ∈ Rm−1 respectively and by identifying ...
Task 4 Improvised Nuclear Device Response Curves
Energy Technology Data Exchange (ETDEWEB)
Alai, Maureen [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Neuscamman, Stephanie [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
2016-05-31
LLNL performed fallout and nuclear blast modeling for the 60 cities using the NARAC modeling system and predominant weather patterns determined in a previous Task 4 effort. LLNL performed model simulations and analyses to identify and provide response curves (expressed as two-dimensional contours) for radioactive fallout deposition, transport, population, and blast overpressure as a function of yield, weather, location and time. These contours can then be further combined and correlated with infrastructure and population databases to estimate city specific effects on KPFs such as impacted infrastructure and casualty rates.
ERROR VS REJECTION CURVE FOR THE PERCEPTRON
PARRONDO, JMR; VAN DEN BROECK, Christian
1993-01-01
We calculate the generalization error epsilon for a perceptron J, trained by a teacher perceptron T, on input patterns S that form a fixed angle arccos (J.S) with the student. We show that the error is reduced from a power law to an exponentially fast decay by rejecting input patterns that lie within a given neighbourhood of the decision boundary J.S = 0. On the other hand, the error vs. rejection curve epsilon(rho), where rho is the fraction of rejected patterns, is shown to be independent ...
Elliptic Tales Curves, Counting, and Number Theory
Ash, Avner
2012-01-01
Elliptic Tales describes the latest developments in number theory by looking at one of the most exciting unsolved problems in contemporary mathematics--the Birch and Swinnerton-Dyer Conjecture. The Clay Mathematics Institute is offering a prize of 1 million to anyone who can discover a general solution to the problem. In this book, Avner Ash and Robert Gross guide readers through the mathematics they need to understand this captivating problem. The key to the conjecture lies in elliptic curves, which are cubic equations in two variables. These equations may appear simple, yet they arise from
Learning curves for mutual information maximization
International Nuclear Information System (INIS)
Urbanczik, R.
2003-01-01
An unsupervised learning procedure based on maximizing the mutual information between the outputs of two networks receiving different but statistically dependent inputs is analyzed [S. Becker and G. Hinton, Nature (London) 355, 161 (1992)]. For a generic data model, I show that in the large sample limit the structure in the data is recognized by mutual information maximization. For a more restricted model, where the networks are similar to perceptrons, I calculate the learning curves for zero-temperature Gibbs learning. These show that convergence can be rather slow, and a way of regularizing the procedure is considered
The Bell Curve: An Essay Review
Directory of Open Access Journals (Sweden)
John C. Culbertson
1995-02-01
Full Text Available Occasionally a book out of academia will break from scholarly circles and enter into the mainstream market. On even rarer occasions, it will gain considerable notoriety before its initial publication. Richard Herrnstein and Charles Murray's The Bell Curve: Intelligence and Class Structure in American Life is such a book. Currently, it has entered the New York Times best- sellers list and appeared in most academic and mainstream periodical book reviews. Direct publicity for the book has also been strong. Although Herrnstein died September 24 of the past year, Murray has appeared on many popular television and radio talk shows.
Curves and tables of neutron cross sections
International Nuclear Information System (INIS)
Nakagawa, Tsuneo; Asami, Tetsuo; Yoshida, Tadashi
1990-07-01
Neutron cross-section curves from the Japanese Evaluated Nuclear Data Library version 3, JENDL-3, are presented in both graphical and tabular form for users in a wide range of application areas in the nuclear energy field. The contents cover cross sections for all the main reactions induced by neutrons with an energy below 20 MeV including; total, elastic scattering, capture, and fission, (n,n'), (n,2n), (n,3n), (n,α), (n,p) reactions. The 2200 m/s cross-section values, resonance integrals, and Maxwellian- and fission-spectrum averaged cross sections are also tabulated. (author)
Operators and higher genus mirror curves
Energy Technology Data Exchange (ETDEWEB)
Codesido, Santiago [Département de Physique Théorique et section de Mathématiques,Université de Genève,Genève, CH-1211 (Switzerland); Gu, Jie [Laboratoire de Physique Théorique de l’École Normale Supérieure,CNRS, PSL Research University,Sorbonne Universités, UPMC, 75005 Paris (France); Mariño, Marcos [Département de Physique Théorique et section de Mathématiques,Université de Genève,Genève, CH-1211 (Switzerland)
2017-02-17
We perform further tests of the correspondence between spectral theory and topological strings, focusing on mirror curves of genus greater than one with nontrivial mass parameters. In particular, we analyze the geometry relevant to the SU(3) relativistic Toda lattice, and the resolved ℂ{sup 3}/ℤ{sub 6} orbifold. Furthermore, we give evidence that the correspondence holds for arbitrary values of the mass parameters, where the quantization problem leads to resonant states. We also explore the relation between this correspondence and cluster integrable systems.
Localization of nonlinear excitations in curved waveguides
DEFF Research Database (Denmark)
Gaididei, Yu. B.; Christiansen, Peter Leth; Kevrekidis, P. G.
2005-01-01
numerical simulations of the nonlinear problem and in this case localized excitations are found to persist. We found also interesting relaxational dynamics. Analogies of the present problem in context related to atomic physics and particularly to Bose–Einstein condensation are discussed.......Motivated by the examples of a curved waveguide embedded in a photonic crystal and cold atoms moving in a waveguide created by a spatially inhomogeneous electromagnetic field, we examine the effects of geometry in a 'quantum channel' of parabolic form. Starting with the linear case we derive exact...
Electromagnetic wave propagating along a space curve
Lai, Meng-Yun; Wang, Yong-Long; Liang, Guo-Hua; Wang, Fan; Zong, Hong-Shi
2018-03-01
By using the thin-layer approach, we derive the effective equation for the electromagnetic wave propagating along a space curve. We find intrinsic spin-orbit, extrinsic spin-orbit, and extrinsic orbital angular-momentum and intrinsic orbital angular-momentum couplings induced by torsion, which can lead to geometric phase, spin, and orbital Hall effects. And we show the helicity inversion induced by curvature that can convert a right-handed circularly polarized electromagnetic wave into a left-handed polarized one, vice versa. Finally, we demonstrate that the gauge invariance of the effective dynamics is protected by the geometrically induced gauge potential.
Electron conductance in curved quantum structures
DEFF Research Database (Denmark)
Willatzen, Morten; Gravesen, Jens
2010-01-01
is computationally fast and provides direct (geometrical) parameter insight as regards the determination of the electron transmission coefficient. We present, as a case study, calculations of the electron conductivity of a helically shaped quantum-wire structure and discuss the influence of the quantum......A differential-geometry analysis is employed to investigate the transmission of electrons through a curved quantum-wire structure. Although the problem is a three-dimensional spatial problem, the Schrodinger equation can be separated into three general coordinates. Hence, the proposed method...
Photoelectic BV Light Curves of Algol and the Interpretations of the Light Curves
Directory of Open Access Journals (Sweden)
Ho-Il Kim
1985-06-01
Full Text Available Standardized B and V photoelectric light curves of Algol are made with the observations obtained during 1982-84 with the 40-cm and the 61-cm reflectors of Yonsei University Observatory. These light curves show asymmetry between ascending and descending shoulders. The ascending shoulder is 0.02 mag brighter than descending shoulder in V light curve and 0.03 mag in B light curve. These asymmetric light curves are interpreted as the result of inhomogeneous energy distribution on the surface of one star of the eclipsing pair rather than the result of gaseous stream flowing from KOIV to B8V star. The 180-year periodicity, so called great inequality, are most likely the result proposed by Kim et al. (1983 that the abrupt and discrete mass losses of cooler component may be the cause of this orbital change. The amount of mass loss deduced from these discrete period changes turned out to be of the order of 10^(-6 - 10^(-5 Msolar.
Analysis of velocity planning interpolation algorithm based on NURBS curve
Zhang, Wanjun; Gao, Shanping; Cheng, Xiyan; Zhang, Feng
2017-04-01
To reduce interpolation time and Max interpolation error in NURBS (Non-Uniform Rational B-Spline) inter-polation caused by planning Velocity. This paper proposed a velocity planning interpolation algorithm based on NURBS curve. Firstly, the second-order Taylor expansion is applied on the numerator in NURBS curve representation with parameter curve. Then, velocity planning interpolation algorithm can meet with NURBS curve interpolation. Finally, simulation results show that the proposed NURBS curve interpolator meet the high-speed and high-accuracy interpolation requirements of CNC systems. The interpolation of NURBS curve should be finished.
Plasma flow in a curved magnetic field
International Nuclear Information System (INIS)
Lindberg, L.
1977-09-01
A beam of collisionless plasma is injected along a longitudinal magnetic field into a region of curved magnetic field. Two unpredicted phenomena are observed: The beam becomes deflected in the direction opposite to that in which the field is curved, and it contracts to a flat slab in the plane of curvature of the magnetic field. The phenomenon is of a general character and can be expected to occur in a very wide range of densities. The lower density limit is set by the condition for self-polarization, nm sub(i)/epsilon 0 B 2 >> 1 or, which is equivalent, c 2 /v 2 sub(A) >> 1, where c is the velocity of light, and v sup(A) the Alfven velocity. The upper limit is presumably set by the requirement ωsub(e)tau(e) >> 1. The phenomenon is likely to be of importance e.g. for injection of plasma into magnetic bottles and in space and solar physics. The paper illustrates the comlexity of plasma flow phenomena and the importance of close contact between experimental and theoretical work. (author)
Dirac equation on a curved surface
Energy Technology Data Exchange (ETDEWEB)
Brandt, F.T., E-mail: fbrandt@usp.br; Sánchez-Monroy, J.A., E-mail: antosan@usp.br
2016-09-07
The dynamics of Dirac particles confined to a curved surface is examined employing the thin-layer method. We perform a perturbative expansion to first-order and split the Dirac field into normal and tangential components to the surface. In contrast to the known behavior of second order equations like Schrödinger, Maxwell and Klein–Gordon, we find that there is no geometric potential for the Dirac equation on a surface. This implies that the non-relativistic limit does not commute with the thin-layer method. Although this problem can be overcome when second-order terms are retained in the perturbative expansion, this would preclude the decoupling of the normal and tangential degrees of freedom. Therefore, we propose to introduce a first-order term which rescues the non-relativistic limit and also clarifies the effect of the intrinsic and extrinsic curvatures on the dynamics of the Dirac particles. - Highlights: • The thin-layer method is employed to derive the Dirac equation on a curved surface. • A geometric potential is absent at least to first-order in the perturbative expansion. • The effects of the extrinsic curvature are included to rescue the non-relativistic limit. • The resulting Dirac equation is consistent with the Heisenberg uncertainty principle.
Modeling of alpha mass-efficiency curve
International Nuclear Information System (INIS)
Semkow, T.M.; Jeter, H.W.; Parsa, B.; Parekh, P.P.; Haines, D.K.; Bari, A.
2005-01-01
We present a model for efficiency of a detector counting gross α radioactivity from both thin and thick samples, corresponding to low and high sample masses in the counting planchette. The model includes self-absorption of α particles in the sample, energy loss in the absorber, range straggling, as well as detector edge effects. The surface roughness of the sample is treated in terms of fractal geometry. The model reveals a linear dependence of the detector efficiency on the sample mass, for low masses, as well as a power-law dependence for high masses. It is, therefore, named the linear-power-law (LPL) model. In addition, we consider an empirical power-law (EPL) curve, and an exponential (EXP) curve. A comparison is made of the LPL, EPL, and EXP fits to the experimental α mass-efficiency data from gas-proportional detectors for selected radionuclides: 238 U, 230 Th, 239 Pu, 241 Am, and 244 Cm. Based on this comparison, we recommend working equations for fitting mass-efficiency data. Measurement of α radioactivity from a thick sample can determine the fractal dimension of its surface
Some fundamental questions about R-curves
International Nuclear Information System (INIS)
Kolednik, O.
1992-01-01
With the help of two simple thought experiments it is demonstrated that there exist two physically different types of fracture toughness. The crack-growth toughness, which is identical to the Griffith crack growth resistance, R, is a measure of the non-reversible energy which is needed to produce an increment of new crack area. The size of R is reflected by the slopes of the R-curves commonly used. So an increasing J-Δa-curve does not mean that the crack-growth resistance increases. The fracture initiation toughness, J i , is a normalized total energy (related to the ligament area) which must be put into the specimen up to fracture initiation. Only for ideally brittle materials R and J i have equal sizes. For small-scale yielding a relationship exists between R and J i , ao a one-parameter description of fracture processes is applicable. For large-scale yielding R and J i are not strictly related and both parameters are necessary to describe the fracture process. (orig.) [de
Spatially varying dispersion to model breakthrough curves.
Li, Guangquan
2011-01-01
Often the water flowing in a karst conduit is a combination of contaminated water entering at a sinkhole and cleaner water released from the limestone matrix. Transport processes in the conduit are controlled by advection, mixing (dilution and dispersion), and retention-release. In this article, a karst transport model considering advection, spatially varying dispersion, and dilution (from matrix seepage) is developed. Two approximate Green's functions are obtained using transformation of variables, respectively, for the initial-value problem and for the boundary-value problem. A numerical example illustrates that mixing associated with strong spatially varying conduit dispersion can cause strong skewness and long tailing in spring breakthrough curves. Comparison of the predicted breakthrough curve against that measured from a dye-tracing experiment between Ames Sink and Indian Spring, Northwest Florida, shows that the conduit dispersivity can be as large as 400 m. Such a large number is believed to imply strong solute interaction between the conduit and the matrix and/or multiple flow paths in a conduit network. It is concluded that Taylor dispersion is not dominant in transport in a karst conduit, and the complicated retention-release process between mobile- and immobile waters may be described by strong spatially varying conduit dispersion. Copyright © 2010 The Author(s). Journal compilation © 2010 National Ground Water Association.
Aspherical Supernovae: Effects on Early Light Curves
Afsariardchi, Niloufar; Matzner, Christopher D.
2018-04-01
Early light from core-collapse supernovae, now detectable in high-cadence surveys, holds clues to a star and its environment just before it explodes. However, effects that alter the early light have not been fully explored. We highlight the possibility of nonradial flows at the time of shock breakout. These develop in sufficiently nonspherical explosions if the progenitor is not too diffuse. When they do develop, nonradial flows limit ejecta speeds and cause ejecta–ejecta collisions. We explore these phenomena and their observational implications using global, axisymmetric, nonrelativistic FLASH simulations of simplified polytropic progenitors, which we scale to representative stars. We develop a method to track photon production within the ejecta, enabling us to estimate band-dependent light curves from adiabatic simulations. Immediate breakout emission becomes hidden as an oblique flow develops. Nonspherical effects lead the shock-heated ejecta to release a more constant luminosity at a higher, evolving color temperature at early times, effectively mixing breakout light with the early light curve. Collisions between nonradial ejecta thermalize a small fraction of the explosion energy; we will address emission from these collisions in a subsequent paper.
Melting curve of materials: theory versus experiments
International Nuclear Information System (INIS)
Alfe, D; Vocadlo, L; Price, G D; Gillan, M J
2004-01-01
A number of melting curves of various materials have recently been measured experimentally and calculated theoretically, but the agreement between different groups is not always good. We discuss here some of the problems which may arise in both experiments and theory. We also report the melting curves of Fe and Al calculated recently using quantum mechanics techniques, based on density functional theory with generalized gradient approximations. For Al our results are in very good agreement with both low pressure diamond-anvil-cell experiments (Boehler and Ross 1997 Earth Planet. Sci. Lett. 153 223, Haenstroem and Lazor 2000 J. Alloys Compounds 305 209) and high pressure shock wave experiments (Shaner et al 1984 High Pressure in Science and Technology ed Homan et al (Amsterdam: North-Holland) p 137). For Fe our results agree with the shock wave experiments of Brown and McQueen (1986 J. Geophys. Res. 91 7485) and Nguyen and Holmes (2000 AIP Shock Compression of Condensed Matter 505 81) and the recent diamond-anvil-cell experiments of Shen et al (1998 Geophys. Res. Lett. 25 373). Our results are at variance with the recent calculations of Laio et al (2000 Science 287 1027) and, to a lesser extent, with the calculations of Belonoshko et al (2000 Phys. Rev. Lett. 84 3638). The reasons for these disagreements are discussed
Handbook of elliptic and hyperelliptic curve cryptography
Cohen, Henri; Avanzi, Roberto; Doche, Christophe; Lange, Tanja; Nguyen, Kim; Vercauteren, Frederik
2005-01-01
… very comprehensive coverage of this vast subject area … a useful and essential treatise for anyone involved in elliptic curve algorithms … this book offers the opportunity to grasp the ECC technology with a diversified and comprehensive perspective. … This book will remain on my shelf for a long time and will land on my desk on many occasions, if only because the coverage of the issues common to factoring and discrete log cryptosystems is excellent.-IACR Book Reviews, June 2011… the book is designed for people who are working in the area and want to learn more about a specific issue. The chapters are written to be relatively independent so that readers can focus on the part of interest for them. Such readers will be grateful for the excellent index and extensive bibliography. … the handbook covers a wide range of topics and will be a valuable reference for researchers in curve-based cryptography. -Steven D. Galbraith, Mathematical Reviews, Issue 2007f.
Curved Piezoelectric Actuators for Stretching Optical Fibers
Allison, Sidney G.; Shams, Qamar A.; Fox, Robert L.
2008-01-01
Assemblies containing curved piezoceramic fiber composite actuators have been invented as means of stretching optical fibers by amounts that depend on applied drive voltages. Piezoceramic fiber composite actuators are conventionally manufactured as sheets or ribbons that are flat and flexible, but can be made curved to obtain load-carrying ability and displacement greater than those obtainable from the flat versions. In the primary embodiment of this invention, piezoceramic fibers are oriented parallel to the direction of longitudinal displacement of the actuators so that application of drive voltage causes the actuator to flatten, producing maximum motion. Actuator motion can be transmitted to the optical fiber by use of hinges and clamp blocks. In the original application of this invention, the optical fiber contains a Bragg grating and the purpose of the controlled stretching of the fiber is to tune the grating as part of a small, lightweight, mode-hop-free, rapidly tunable laser for demodulating strain in Bragg-grating strain-measurement optical fibers attached to structures. The invention could also be used to apply controllable tensile force or displacement to an object other than an optical fiber.
Light Curve Variations of AR Lacertae
Directory of Open Access Journals (Sweden)
Il-Seong Nha
1991-12-01
Full Text Available Sixteen unitary Light curves of AR Lac in B and V are made at Yonsei University Observatory in the period of 1980-1988. Some overview findings of light variations are made. (1 The light variations outside eclipse follow none of the wave migration patterns reported by previous investigators. (2 Complicated shapes outside eclipse are apparently much reduced in the light curves of 1983-1984. This suggests that, in the future, AR Lac has a chance to attain a normal state with mo complicated interactions. (3 The depths of the primary and the secondary mid-eclipses are changing year-to-year. (4 The K0 star, the larger component, has brightened by 0.m14 V, while the G2 star has shown a fluctuation of about 0.m05 in V. (5 The B-V values at primary mid-eclipse have no correlation with the depth variations. (6 Independently of the increase of maximum brightness, the B-V colors in the non-eclipsed phases changed slightly over the years.
Phillips Lab Project Manager’s Handbook
1994-04-15
Program Element Planners ( PEPsI ) the requirement. Based on instructions issued by SAF/AQX, -- PEPs have the authority to move funding Descriptive Summaries...finished published documents, must be Public Affairs: The office of Public Affairs marked for the intended audience . The (PL/PA) is the OPR for USAF
Schlösser, Tom P C; van Stralen, Marijn; Chu, Winnie C W; Lam, Tsz-Ping; Ng, Bobby K W; Vincken, Koen L; Cheng, Jack C Y; Castelein, René M
2016-01-01
Although much attention has been given to the global three-dimensional aspect of adolescent idiopathic scoliosis (AIS), the accurate three-dimensional morphology of the primary and compensatory curves, as well as the intervening junctional segments, in the scoliotic spine has not been described before. A unique series of 77 AIS patients with high-resolution CT scans of the spine, acquired for surgical planning purposes, were included and compared to 22 healthy controls. Non-idiopathic curves were excluded. Endplate segmentation and local longitudinal axis in endplate plane enabled semi-automatic geometric analysis of the complete three-dimensional morphology of the spine, taking inter-vertebral rotation, intra-vertebral torsion and coronal and sagittal tilt into account. Intraclass correlation coefficients for interobserver reliability were 0.98-1.00. Coronal deviation, axial rotation and the exact length discrepancies in the reconstructed sagittal plane, as defined per vertebra and disc, were analyzed for each primary and compensatory curve as well as for the junctional segments in-between. The anterior-posterior difference of spinal length, based on "true" anterior and posterior points on endplates, was +3.8% for thoracic and +9.4% for (thoraco)lumbar curves, while the junctional segments were almost straight. This differed significantly from control group thoracic kyphosis (-4.1%; P<0.001) and lumbar lordosis (+7.8%; P<0.001). For all primary as well as compensatory curves, we observed linear correlations between the coronal Cobb angle, axial rotation and the anterior-posterior length difference (r≥0.729 for thoracic curves; r≥0.485 for (thoraco)lumbar curves). Excess anterior length of the spine in AIS has been described as a generalized growth disturbance, causing relative anterior spinal overgrowth. This study is the first to demonstrate that this anterior overgrowth is not a generalized phenomenon. It is confined to the primary as well as the
A simple transformation for converting CW-OSL curves to LM-OSL curves
DEFF Research Database (Denmark)
Bulur, E.
2000-01-01
A simple mathematical transformation is introduced to convert from OSL decay curves obtained in the conventional way to those obtained using a linear modulation technique based on a linear increase of the stimulation light intensity during OSL measurement. The validity of the transformation...... was tested by the IR-stimulated luminescence curves from feldspars, recorded using both the conventional and the linear modulation techniques. The transformation was further applied to green-light-stimulated OSL from K and Na feldspars. (C) 2000 Elsevier Science Ltd. All rights reserved....
ON THE TOPOLOGY OF MECHANISMS DESIGNED FOR CURVES GENERATION
Directory of Open Access Journals (Sweden)
MEREUTA Elena
2008-07-01
Full Text Available The paper presents some mechanisms used for generating simple or complex curves. The mechanisms are shown in different positions and for some special curves the demonstrations are performed.
Potentiometric titration curves of aluminium salt solutions and its ...
African Journals Online (AJOL)
Potentiometric titration curves of aluminium salt solutions and its species conversion ... of aluminium salt solutions under the moderate slow rate of base injection. ... silicate radical, and organic acid radical on the titration curves and its critical ...
Curve of Spee and Its Relationship with Dentoskeletal Morphology
Directory of Open Access Journals (Sweden)
Prerna Raje Batham
2013-01-01
Conclusion: The curve of Spee is related to various dentoskeletal variables. Thus, the determination of this relationship is useful to assess the feasibility of leveling the curve of Spee by orthodontic treatment.
Path Integrals and Anomalies in Curved Space
International Nuclear Information System (INIS)
Louko, Jorma
2007-01-01
Bastianelli and van Nieuwenhuizen's monograph 'Path Integrals and Anomalies in Curved Space' collects in one volume the results of the authors' 15-year research programme on anomalies that arise in Feynman diagrams of quantum field theories on curved manifolds. The programme was spurred by the path-integral techniques introduced in Alvarez-Gaume and Witten's renowned 1983 paper on gravitational anomalies which, together with the anomaly cancellation paper by Green and Schwarz, led to the string theory explosion of the 1980s. The authors have produced a tour de force, giving a comprehensive and pedagogical exposition of material that is central to current research. The first part of the book develops from scratch a formalism for defining and evaluating quantum mechanical path integrals in nonlinear sigma models, using time slicing regularization, mode regularization and dimensional regularization. The second part applies this formalism to quantum fields of spin 0, 1/2, 1 and 3/2 and to self-dual antisymmetric tensor fields. The book concludes with a discussion of gravitational anomalies in 10-dimensional supergravities, for both classical and exceptional gauge groups. The target audience is researchers and graduate students in curved spacetime quantum field theory and string theory, and the aims, style and pedagogical level have been chosen with this audience in mind. Path integrals are treated as calculational tools, and the notation and terminology are throughout tailored to calculational convenience, rather than to mathematical rigour. The style is closer to that of an exceedingly thorough and self-contained review article than to that of a textbook. As the authors mention, the first part of the book can be used as an introduction to path integrals in quantum mechanics, although in a classroom setting perhaps more likely as supplementary reading than a primary class text. Readers outside the core audience, including this reviewer, will gain from the book a
The thermal curve of nuclear matter
International Nuclear Information System (INIS)
Ma, Y.G.; Peter, J.; Siwek, A.; Bocage, F.; Bougault, R.; Brou, R.; Colin, J.; Cussol, D.; Durand, D.; Genouin-Duhamel, E.; Gulminelli, F.; Lecolley, J.F.; Lefort, T.; Le Neindre, N.; Lopez, O.; Louvel, M.; Nguyen, A.D.; Steckmeyer, J.C.; Tamain, B.; Vient, E.
1997-01-01
Earlier measurements of nuclear matter thermal curve of liquid to gas phase transition presented two limitation: only one temperature measuring method was available and the mass number of the formed nuclei decreased from 190 to 50 when the excitation energy increased. To avoid these limitations experiments with the multidetector INDRA at GANIL were carried-out. Among the quasi-projectiles issued from the 36 Ar collisions at 52, 74, 95 A.MeV on the 58 Ni, nuclei of close masses were selected. The excitation energy was determined by the calorimetry of the charged products emitted by quasi-projectiles while the temperature was measured by three different methods. Very different apparent temperatures were obtained for the same excitation energy/nucleon. Only one curve displays a slope variation but no indication of plateau. With the quasi-projectiles obtained from the collisions of 129 Xe at 50 MeV/u on a 119 Sn target behaviors similar to those of 36 Ar were observed in the covered domain of excitation energy. To solve this puzzle and recover the initial temperatures of interest the only mean was to do a theoretical simulation in which one follows the de-excitation of the nuclei formed at different excitation energies and look for the thermal curve able to reproduce the observed temperatures. Two extreme possibilities were taken into account concerning the de-excitation process: either a sequential process established at E * /A≤ 3 MeV/u or a sudden multifragmentation in several hot fragments, most probably at E * /A≥ 10 MeV/u. In both cases it was possible to reproduce the whole set of experimental results concerning the 36 Ar projectile. The initial temperature increases steadily as a function of excitation energy showing no plateau or singular points. The results indicate that, being a system without external pressure, in its passage from the liquid phase to the gas phase the nucleus does not display necessarily a temperature plateau. Discussions on
Illusory Paschen curves associated with strongly electronegative gases
DEFF Research Database (Denmark)
McAllister, Iain Wilson
1991-01-01
Using analytical linear regression analysis, it is shown that, for a strongly electronegative gas, the (direct) breakdown voltage curve obtained with a moderately nonuniform field is effectively linear. For a strongly electronegative gas, breakdown voltage measurements made on a moderately...... nonuniform field test gap give rise to an apparently liner curve. The curve can be designated a Paschen curve, but the erroneous nature of this designation becomes apparent from a linear regression analysis of the experimental breakdown data...
Nonlinear Growth Curves in Developmental Research
Grimm, Kevin J.; Ram, Nilam; Hamagami, Fumiaki
2011-01-01
Developmentalists are often interested in understanding change processes and growth models are the most common analytic tool for examining such processes. Nonlinear growth curves are especially valuable to developmentalists because the defining characteristics of the growth process such as initial levels, rates of change during growth spurts, and asymptotic levels can be estimated. A variety of growth models are described beginning with the linear growth model and moving to nonlinear models of varying complexity. A detailed discussion of nonlinear models is provided, highlighting the added insights into complex developmental processes associated with their use. A collection of growth models are fit to repeated measures of height from participants of the Berkeley Growth and Guidance Studies from early childhood through adulthood. PMID:21824131
Environmental management by the learning curve
International Nuclear Information System (INIS)
Fehr, M.
2003-01-01
This is a futuristic appreciation of waste management challenges and their solution by means of good management models. A literature review, administrative initiatives, research results, and experiences from practice are combined in this study to render an evolutionary picture of the change in paradigm relative to municipal solid waste possible to occur between 2000 and 2025. The principal stages of progress in the 25 years studied were: the correct characterization of municipal solid waste as a function of geographical location and recycling potential, the divided collection model and its corresponding learning curve, correct opportunity cost accounting tools, and the generally admitted and accepted changeover of municipal solid waste treatment from a technical to a management problem. It is reported that as a result of this progress, the municipal landfill is a species in extinction. Regional landfills with long life spans are the rule in 2025