Fuel oil and kerosene sales 1992

International Nuclear Information System (INIS)

1993-01-01

This publication contains the 1992 survey results of the ''Annual Fuel Oil and Kerosene Sales Report'' (Form EIA-821). This is the fourth year that the survey data have appeared in a separate publication. Prior to the 1989 report, the statistics appeared in the Petroleum Marketing Annual (PMA) for reference year 1988 and the Petroleum Marketing Monthly (PMM for reference years 1984 through 1987. The 1992 edition marks the ninth annual presentation of the results of the ongoing ''Annual Fuel Oil and Kerosene Sales Report'' survey. Except for the kerosene and on-highway diesel information, data presented in Tables 1 through 12 (Sales of Fuel Oil and Kerosene) present results of the EIA-821 survey. Tables 13 through 24 (Adjusted Sales of Fuel Oil and Kerosene) include volumes that are based on the EIA-821 survey but have been adjusted to equal the products supplied volumes published in the Petroleum Supply Annual (PSA)

Artifical Microorganism Infection in Aviation Kerosene

Directory of Open Access Journals (Sweden)

Dušan Vallo

2004-12-01

Full Text Available The fuel used in the aviation engineering has to be clean and dry, it may not contain mechanical impurities and water. Water inaviation kerosene may occur in soluble and insoluble form. The danger inheres in the insoluble form, which may drop out in the crystallineform and cause various failures, such as those caused by mechanical impurities. The water assists in the biological matter formation createdby various species of microorganisms (bacteria, mould fungi and yeast. The microorganisms, present in water phase occurring on thebottom of tanks or on the interface water phase – kerosene, grow and reproduce and subsequently may pollute (impair the fuel by thebiomass or by the products of their metabolism. There is a possibility to infect the fuel artificially by a selected reference microorganismstrain, which usually occur in contaminated fuel, or by microorganisms which cause a biological contamination of aviation kerosene.Out of the selected reference strains used in the experiments, the reference strains of Proteus vulgaris, Sacharamyces cerevisiae andClostridium perfringens were not cultivated in the sterile aviation kerosene and the propagating nutrient medium. The aviation kerosene actsas a biocide medium for the presented reference microorganism strains.

Fuel oil and kerosene sales 1997

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-08-01

The Fuel Oil and Kerosene Sales 1997 report provides information, illustrations and state-level statistical data on end-use sales of kerosene; No. 1, No. 2, and No. 4 distillate fuel oil; and residual fuel oil. State-level kerosene sales include volumes for residential, commercial, industrial, farm, and all other uses. State-level distillate sales include volumes for residential, commercial, industrial, oil company, railroad, vessel bunkering, military, electric utility, farm, on-highway, off highway construction, and other uses. State-level residual fuel sales include volumes for commercial, industrial, oil company, vessel bunkering, military, electric utility, and other uses. 24 tabs.

Fuel oil and kerosene sales 1997

International Nuclear Information System (INIS)

1998-08-01

The Fuel Oil and Kerosene Sales 1997 report provides information, illustrations and state-level statistical data on end-use sales of kerosene; No. 1, No. 2, and No. 4 distillate fuel oil; and residual fuel oil. State-level kerosene sales include volumes for residential, commercial, industrial, farm, and all other uses. State-level distillate sales include volumes for residential, commercial, industrial, oil company, railroad, vessel bunkering, military, electric utility, farm, on-highway, off highway construction, and other uses. State-level residual fuel sales include volumes for commercial, industrial, oil company, vessel bunkering, military, electric utility, and other uses. 24 tabs

Household fuels, low birth weight, and neonatal death in India: the separate impacts of biomass, kerosene, and coal.

Science.gov (United States)

Epstein, M B; Bates, M N; Arora, N K; Balakrishnan, K; Jack, D W; Smith, K R

2013-08-01

We examined the impact of maternal use of different household cooking fuels in India on low birth weight (LBWfuels for cooking - biomass, coal, and kerosene - using low-pollution fuels (gas and biogas) as the comparison "control" group. Taking socioeconomic and child-specific factors into account, we employed logistic regression to examine the impact of fuel use on fetal and infant health. The results indicate that household use of high-pollution fuels is significantly associated with increased odds of LBW and neonatal death. Compared to households using cleaner fuels (in which the mean birth weight is 2901g), the primary use of coal, kerosene, and biomass fuels is associated with significant decreases in mean birth weight (of -110g for coal, -107g for kerosene, and -78g for biomass). Kerosene and biomass fuel use are also associated with increased risk of LBW (pfuels. Copyright © 2012 Elsevier GmbH. All rights reserved.

Advantages of the use of hydrogen fuel as compared to kerosene

International Nuclear Information System (INIS)

Koroneos, C.; Dompros, A.; Roumbas, G.; Moussiopoulos, N.

2005-01-01

A life cycle assessment (LCA) study has been carried out to investigate the environmental aspects of two types of aviation fuel, kerosene that is presently used and hydrogen. Hydrogen is selected as a future aircraft fuel because of the absence of CO 2 emissions from its use, its high energy content and its combustion kinetics. The life cycle of aviation fuel includes the production and the use of the aviation fuel in different types of aircraft. Hydrogen production by natural gas steam reforming and production upon renewable energy sources (RES) are examined. A very large number of environmental burdens result from the operation of the different fuel cycles. Air pollution is by far the biggest environmental problem that is resulting from hydrogen and kerosene production and use. This work has been mainly concentrated with this environmental impact category. It is shown that the production of hydrogen from RES has significantly lower environmental impact as compared to that of kerosene. However, the use of different RES carries different environmental impacts among them. The production of hydrogen resulting from the use of photovoltaics to capture solar energy carries the biggest environmental impact among the other RES, wind, hydropower, biomass and solar thermal

Tension Pneumothorax following an Accidental Kerosene Poisoning ...

African Journals Online (AJOL)

Tension pneumothorax is a rare complication following an accidental kerosene poisoning. In such situation, a bed-side needle thoracocentesis is performed because of its potential of becoming fatal; hence its clinical importance. A case of 15 month old boy with tension pneumothorax following accidental kerosene ...

comparative toxicity of petrol and kerosene to periwinkle

African Journals Online (AJOL)

PROF EKWUEME

and kerosene are toxic to the environment with petrol being more toxic than the kerosene. ... automobiles, generators, heating or cooking at home, ... O. S. Edori, Department of Chemistry, Ignatius Ajuru University of Education, PMB 5047 ...

Kerosene Oil Poisoning among Children in Rural Sri Lanka.

Science.gov (United States)

Dayasiri, M B Kavinda Chandimal; Jayamanne, Shaluka F; Jayasinghe, Chamilka Y

2017-01-01

Kerosene oil poisoning is one of common presentations to emergency departments among children in rural territories of developing countries. This study aimed to describe clinical manifestations, reasons for delayed presentations, harmful first aid practices, complications, and risk factors related to kerosene oil poisoning among children in rural Sri Lanka. This multicenter study was conducted in North-Central province of Sri Lanka involving all in-patient children with acute kerosene oil poisoning. Data were collected over seven years from thirty-six hospitals in the province. Data collection was done by pretested, multistructured questionnaires and a qualitative study. Male children accounted for 189 (60.4%) while 283 (93%) children were below five years. The majority of parents belonged to farming community. Most children ingested kerosene oil in home kitchen. Mortality rate was 0.3%. Lack of transport facilities and financial resources were common reasons for delayed management. Hospital transfer rate was 65.5%. Thirty percent of caregivers practiced harmful first aid measures. Commonest complication was chemical pneumonitis. Strongest risk factors for kerosene oil poisoning were unsafe storage, inadequate supervision, and inadequate house space. Effect of safe storage and community education in reducing the burden of kerosene oil poisoning should be evaluated. Since many risk factors interact to bring about the event of poisoning in a child, holistic approaches to community education in rural settings are recommended.

Kerosene Oil Poisoning among Children in Rural Sri Lanka

Directory of Open Access Journals (Sweden)

M. B. Kavinda Chandimal Dayasiri

2017-01-01

Full Text Available Introduction. Kerosene oil poisoning is one of common presentations to emergency departments among children in rural territories of developing countries. This study aimed to describe clinical manifestations, reasons for delayed presentations, harmful first aid practices, complications, and risk factors related to kerosene oil poisoning among children in rural Sri Lanka. Methods. This multicenter study was conducted in North-Central province of Sri Lanka involving all in-patient children with acute kerosene oil poisoning. Data were collected over seven years from thirty-six hospitals in the province. Data collection was done by pretested, multistructured questionnaires and a qualitative study. Results. Male children accounted for 189 (60.4% while 283 (93% children were below five years. The majority of parents belonged to farming community. Most children ingested kerosene oil in home kitchen. Mortality rate was 0.3%. Lack of transport facilities and financial resources were common reasons for delayed management. Hospital transfer rate was 65.5%. Thirty percent of caregivers practiced harmful first aid measures. Commonest complication was chemical pneumonitis. Strongest risk factors for kerosene oil poisoning were unsafe storage, inadequate supervision, and inadequate house space. Conclusions. Effect of safe storage and community education in reducing the burden of kerosene oil poisoning should be evaluated. Since many risk factors interact to bring about the event of poisoning in a child, holistic approaches to community education in rural settings are recommended.

Combustion, performance and emissions of a diesel power generator fueled with biodiesel-kerosene and biodiesel-kerosene-diesel blends

International Nuclear Information System (INIS)

Bayındır, Hasan; Işık, Mehmet Zerrakki; Argunhan, Zeki; Yücel, Halit Lütfü; Aydın, Hüseyin

2017-01-01

High percentages of biodiesel blends or neat biodiesel cannot be used in diesel engines due to high density and viscosity, and poor atomization properties that lead to some engine operational problems. Biodiesel was produced from canola oil by transesterification process. Test fuels were prepared by blending 80% of the biodiesel with 20% of kerosene (B80&K20) and 80% of the biodiesel with 10% of kerosene and 10% diesel fuel (B80&K10&D10). Fuels were used in a 4 cylinders diesel engine that was loaded with a generator. Combustion, performance and emission characteristics of the blend fuels and D2 in the diesel engine for certain loads of 3.6, 7.2 and 10.8 kW output power and 1500 rpm constant engine speed were experimented and deeply analyzed. It was found that kerosene contained blends had quite similar combustion characteristics with those of D2. Mass fuel consumption and Bscf were slightly increased for blend fuels. HC emissions slightly increased while NOx emissions considerably reduced for blends. It was resulted that high percentages of biodiesel can be a potential substitute for diesel fuel provided that it is used as blending fuel with certain amounts of kerosene. - Highlights: • Effects of kerosene and diesel addition to biodiesel in a diesel engine were investigated. • B80&K10 and B80&K10&D10 were tested and comparisons have been made with D2. • Similar fuel properties and combustion parameters have been found for all fuels. • Heat release initiated earlier for B80&K10 and B80&K10&D10. • CO and NOx emissions are lowered for B80&K10 and B80&K10&D10.

Experimentation on bio-kerosene stove using organic additive

Science.gov (United States)

Varshini, M.; Shetty, Divakar

2017-07-01

One of the basic worthy item used in most of the villages even now a day's also is the kerosene stove. But in the current scenario, the petroleum products are been replenished. So an alternate fuel should be found in order delve. This work is to check the contingency of blending pongamia oil and kerosene in which is used as an additive. Pongamia is one of the forest based fast growing evergreen tree which is capable of yielding 9 - 90 kg seeds from which 25% of oil can be extracted. Distilled cow urine is to be used so that the fuel can be stored for longer time and is odorless. Blends of 10% to 70% neat pongamia oil - kerosene(KEP) and pongamia oil - kerosene with additive(KEPWA) are prepared. The properties such as flash point, fire point and viscosity are determined. The blends are been compared by doing emission test. The blends with additive showed better properties and reducing in emission characteristics compared to neat blends. It is also observed that emission of CO is decreasing with increasing blends.

Experimental and numerical investigation of kerosene flammability

Energy Technology Data Exchange (ETDEWEB)

Sochet, I. [Orleans Univ., ENSIB, Lab. Energetique Explosions Structures, 18 - Bourges (France); Pascaud, J.M.; Gillard, P. [Orleans Univ., IUTde Bourges, Lab. Energetique Explosions Structures, 18 - Bourges (France)

2002-08-01

In an attempt to contribute to aircraft safety, it is fundamental to define the explosions conditions of kerosene vapor in an aircraft tank. Flammability properties of kerosene F-34 and F-35 have been determined experimentally. The flash point and the vapor pressure have been measured by means of an appropriate apparatus. A first analysis of the composition by GC-MS analysis shows four essential compounds: decane, dodecane, 1,2,4 trimethylbenzene and butyl-cyclohexane. The evolution of maximum pressure is compared with the theoretical values obtained with a simple model based on the theory of molecule collisions. A simple modelling has been developed as part of a novel study on ignition and combustion of classical propulsive powders and transposed to liquid kerosene droplets in order to predict the main characteristics of these explosions in a closed vessel. (authors)

Comparative toxicity of petrol and kerosene to periwinkle ...

African Journals Online (AJOL)

The comparative toxicities of two petroleum products, petrol and kerosene were examined by exposing Tympanotonus fuscatus to acute concentrations (60, 90, 120 and 150ml/L) of these toxicants for 96 hours. The 48th hour LC50 for petrol was 177.36 ml/L, while that of kerosene was 306.16 ml/L. The 96th hour LC50 was ...

Percepción de artefactos financieros en estudiantes de Contaduría y Psicología de una Universidad Mexicana

Directory of Open Access Journals (Sweden)

Carlos Robles

2015-05-01

Full Text Available La configuración de la cultura financiera desde los aportes de Hofstede (1982, Schein (2004 y Aguilar (2002, se configura a partir de artefactos, normas, costumbres, hábitos, conocimientos, actitudes, intereses, creencias y valores respecto de las formas de adquirir y aplicar los recursos financieros para lograr propósitos socio-económicos tanto personales como empresariales; cada aspecto entraña una complejidad en su abordaje por lo que se supone necesario delimitar la perspectiva de su estudio en el contexto de una nación o en grupos sociales que comparten características específicas. El presente estudio de corte cualitativo muestra los rasgos de los artefactos como parte de la cultura financiera en estudiantes de las Licenciaturas en Contaduría y Psicología en el Estado de México. A través de grupos de enfoque se identificaron las categorías –componentes- de los artefactos aplicables en los procesos de obtención y aplicación de los recursos financieros, en grupos de estudiantes de diferentes semestres en una institución de educación superior en el Estado de México. El análisis de discurso se apoyó en una unidad hermenéutica para el diseño de redes ontosemióticas. Como resultado se identificó el papel del dinero como representación simbólica de estatus económico y social, que determina a nivel de creencia el rol social de cada persona. La experiencia de los sujetos en el manejo de cada artefacto, les ha generado percepciones positivas a cerca de los prestamistas y tandas como formas de fondeo y ahorro; así como percepciones negativas derivadas de la ausencia de hábitos de ahorro, de descontrol de endeudamiento, de los abusos sufridos en servicios prestados por las cajas de ahorro, los créditos bancarios, los servicios de las casas de empeño y específicamente en los préstamos entre amigos y familiares llegando a tener efectos negativos en la estabilidad e integración familiar.

Performance evaluation of kerosene stoves

Energy Technology Data Exchange (ETDEWEB)

Malathy, D; Murugesan, V; Shanmugam, K; Swaminathan, K R

1984-07-01

This article compares the eight types of stoves available in the market in Coimbatore area. The authors have discussed about the design parameters which affect the fuel efficiencies of the kerosene stoves.

West Valley demonstration project: Implementation of the kerosene mitigation plan

International Nuclear Information System (INIS)

Blickwedehl, R.R.; Goodman, J.; Valenti, P.J.

1987-05-01

An aggressive program was implemented to mitigate the migration of radioactive kerosene believed to have originated from the West Valley NRC-Licensed Disposal Area (NDA) disposal trenches designated as SH-10 and SH-11 (Special Holes 10 and 11). This report provides a historical background of the events leading to the migration problem, the results of a detailed investigation to determine the location and source of the kerosene migration, the remediation plan to mitigate the migration, and the actions taken to successfully stabilize the kerosene. 7 refs., 19 figs., 1 tab

Availability of kerosene to rural households: a case study from India

International Nuclear Information System (INIS)

Rehman, Ibrahim Hafeezur; Malhotra, Preeti; Pal, Ram Chandra; Singh, Phool Badan

2005-01-01

A majority of the rural population in India continues to rely on kerosene for domestic lighting. Measures to promote inter-fuel substitution in domestic lighting by promoting rural electrification have met with partial success. Electrified households in rural areas also use kerosene as a back up fuel because of erratic and poor electricity supply. Kerosene is subsidised, and an extensive network has been put in place for its distribution. Both these measures are meant to facilitate access and affordability by the poor. However, this is not the case at the grass-roots level. Further, use of traditional lighting devices has also had an adverse affect on the quality of life of the people for these devices are inefficient, emit smoke, and give poor-quality light. In this the poorest of the poor, who have limited choices and options are worst affected. This paper, taking the example of a TERI (the Energy and Resources Institute) case study in the state of Rajasthan, analyses the issues of access and availability of kerosene to rural masses, especially the poor. It highlights the existing problems with the kerosene distribution system and examines the subsidy-based, supply driven approach to distribution in terms of facilitating access to the poor. It, accordingly, puts forward specific policy measures for improving access to kerosene and its more efficient use as a lighting fuel in rural India

Myco-Flora of a Kerosene-Polluted Soil in Nigeria | WEMEDO ...

African Journals Online (AJOL)

The myco-flora of a Kerosene-polluted soil was investigated. Soil samples collected from a fallow patch of land were polluted with 90 ml, 180 ml, and 270 ml concentrations of kerosene. The 0 ml (untreated soil) served as control. Cultivation of the organisms was done on potato dextrose agar (PDA) after 2 days, 7 days and ...

Design and test of a 5 kWe high-temperature polymer electrolyte fuel cell system operated with diesel and kerosene

International Nuclear Information System (INIS)

Samsun, Remzi Can; Pasel, Joachim; Janßen, Holger; Lehnert, Werner; Peters, Ralf; Stolten, Detlef

2014-01-01

Highlights: • A fuel cell system for application as auxiliary power unit was developed. • Key components were a high-temperature PEFC stack and an autothermal reformer. • The system was tested with GTL kerosene, BTL diesel and premium diesel fuel. • The target electrical power of 5 kW was achieved with all fuels used. • Self-sustaining system operation was demonstrated with the integrated system design. - Abstract: A high-temperature PEFC system, developed with the aim of delivering 5 kW electrical power from the chemical energy stored in diesel and kerosene fuels for application as an auxiliary power unit, was simulated and tested. The key components of the system were an autothermal reformer, a water–gas shift reactor, a catalytic burner, and the HT-PEFC stack. The targeted power level of 5 kW was achieved using different fuels, namely GTL kerosene, BTL diesel and premium diesel. Using an integrated system approach, operation without external heat input was demonstrated. The overall analysis showed slight but non-continuous performance loss for 250 h operation time

27 CFR 21.115 - Kerosene (deodorized).

Science.gov (United States)

2010-04-01

....115 Kerosene (deodorized). (a) Distillation range. No distillate should come over below 340 °F. and none above 570 °F. (b) Flash point. 155 °F. minimum. [T.D. ATF-133, 48 FR 24673, June 2, 1983...

Cellular polymorphism and nitrogenase activity of Azotobacter nigricans During Kerosene removal

International Nuclear Information System (INIS)

Garcia-Esquivel, G.; Rodriguez-Casasola, T.; Ferrera-Cerrato, R.; Rodriguez-Vazquez, R.; Calva-Calva, G.; Esparza-Garcia, F.

2009-01-01

It has been reported that certain plants grow in soils contaminated with hydrocarbons developing nitrogen-fixing bacteria. for example in the rhizosphere of beams plants grown in soil contaminated with kerosene it was found the presence of Azotobacter which removed kerosene and produced polymorphic cells when they grew in nitrogen free cultures. (Author)

Slow Design: "cultivar" cultura y sensorialidad en la forma y en el uso de los artefactos

OpenAIRE

Lupo, Eleonora

2012-01-01

Este artículo pretende aportar principios clave y ejemplos de aplicación de un "enfoque slow" en el diseño de las funciones y experiencias propias de un producto. Algunos ejemplos mostrarán como incorporar las "cualidades soft" y los elementos culturales/intangibles presentes en los "artefactos culturalmente intensivos", en pro de una experiencia verdaderamente slow, pero al mismo tiempo densa y profunda, en el ámbito de las relaciones y la apropiación entre las personas y la producción de ma...

Development of a new spectrophotometric method to determine the total aromatic contents in kerosene

International Nuclear Information System (INIS)

Harfoush, A.; shlewit, H.

1996-12-01

This developed spectrophotometric method is helpful to determine and control the total aromatic contents in kerosene, during the treatment process of kerosene with conc. H sup 2 SO sup 4 and P sup 2 O sup 5 to remove aromatics, which have negative effect on the solvent extraction coefficient KD of uranium from the Syrian phosphoric acid, where kerosene is used as diluent. this method is rapid according to others, and simply, using the standard curve prepared by the separated aromatics from the Syrian kerosene, A =f (C) at 272 nm, we can calculate the aromatic contents in the known samples. (author). 24 Refs., 5 Figs

Una gramática emergente ¿internet como cultura o artefacto?

Directory of Open Access Journals (Sweden)

Mireya Barón Pulido

2012-12-01

Full Text Available Nativos digitales, gramáticas emergentes, internet como cultura y como artefacto son referentes marco que dinamizan tanto la emisión como la interpretación de signos en la población universitaria. El artículo muestra los resultados de las tendencias de usos de los lenguajes y mediaciones TICS en jóvenes universitarios de primer semestre del Politécnico Grancolombiano-COLOMBIA a partir del trabajo con grupos focales y aplicación de instrumento, con el propósito de sistematizar la tendencia de esta semiosis y su relación con el escenario pedagógico en la educación superior. Por demás, la investigación logra hacer un estado de arte de los resultados-casos en América Latina y Europa ante la realidad sígnica TICS y actores universitarios.

27 CFR 21.114 - Kerosene.

Science.gov (United States)

2010-04-01

... Kerosene. (a) Distillation range. (For applicable ASTM method, see 1980 Annual Book of ASTM Standards, Part... for aviation turbine fuels and D 86-78 for distillation of petroleum products; for incorporation by reference, see § 21.6(b).) No distillate should come over below 340 °F. and none above 570 °F. (b) Flash...

Strength behaviour of kerosene coated coir fiber-reinforced expansive soil

OpenAIRE

Ramasubbarao Godavarthi Venkata

2014-01-01

Coir fibers are extracted from the husks surrounding the coconut. Coir fibers can be effectively used as reinforcing material but it has less durability and hence coir fiber coated with kerosene is used as reinforcement in the present study. The objective of the present investigation is to study the strength behavior of expansive soil reinforced with 5mm long randomly distributed kerosene coated coir fibers in 0% (unreinforced), 0.5%, 1% and 1.5% by dry wei...

El cuerpo como artefacto: tecnologías médicas, anatomopolítica y resistencia

Directory of Open Access Journals (Sweden)

Jorge M. Escobar Ortiz

2015-06-01

Full Text Available En este artículo se defiende la tesis de que hay un giro importante en el biopoder anatomopolítico de finales del siglo XX y comienzos del XXI. Este giro consiste en la aparición de diferentes tendencias culturales que comprenden el cuerpo humano como un artefacto que puede usarse para manifestar resistencia al poder. Para ello, estas tendencias se sirven de las tecnologías médicas como un medio para diseñar el cuerpo de acuerdo con una intención particular que permita cumplir cierta función elegida de antemano por quien identifica ese cuerpo como propio.

Plantillas y artefactos personalización de RUP para proyectos académicos de desarrollo de software

OpenAIRE

López Márquez, Mario Dario; Villa Palacio, Juan Camilo

2012-01-01

En este documento se encontrará información que presenta un marco teórico del proyecto de grado -- Dicho marco proveerá los objetivos generales y específicos, justificaciones, ejemplos y conclusiones que argumentarán el trabajo sobre el tema de metodologías ágiles orientadas a la academia -- El trabajo se realiza con el propósito presentar una serie de plantillas, artefactos y ejemplos cercanos a la vida real de proyectos de desarrollo de software usando la metodología EAFIT-UP (E...

26 CFR 48.4082-3 - Diesel fuel and kerosene; visual inspection devices. [Reserved

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 16 2010-04-01 2010-04-01 true Diesel fuel and kerosene; visual inspection... THE TREASURY (CONTINUED) MISCELLANEOUS EXCISE TAXES MANUFACTURERS AND RETAILERS EXCISE TAXES Motor Vehicles, Tires, Tubes, Tread Rubber, and Taxable Fuel Taxable Fuel § 48.4082-3 Diesel fuel and kerosene...

Absorption and scattering of laser radiation by the diffusion flame of aviation kerosene

Energy Technology Data Exchange (ETDEWEB)

Gvozdev, S V; Glova, A F; Dubrovskii, V Yu; Durmanov, S T; Krasyukov, A G; Lysikov, A Yu; Smirnov, G V; Solomakhin, V B

2012-04-30

The absorption coefficient of the radiation of a repetitively pulsed Nd : YAG laser with an average output power up to 6 W and of a cw ytterbium optical fibre laser with an output power up to 3 kW was measured in the diffusion flame of aviation kerosene burning on a free surface in the atmospheric air. The absorption coefficient as a function of flame length, radiation power, and radiation intensity, which was varied in the {approx}10{sup 3} - 5 Multiplication-Sign 10{sup 4} W cm{sup -2} range, was obtained for two distances (1 and 2 cm) between the laser beam axis and the surface. The coefficient of radiation absorption by kerosene flame was compared with that in ethanol and kerosene - ethanol mixture flames. The radiation power scattered by a small segment of the kerosene flame irradiated by Nd : YAG laser radiation was measured as a function of longitudinal and azimuthal coordinates. An estimate was made of the total scattered radiation power.

Absorption and scattering of laser radiation by the diffusion flame of aviation kerosene

International Nuclear Information System (INIS)

Gvozdev, S V; Glova, A F; Dubrovskii, V Yu; Durmanov, S T; Krasyukov, A G; Lysikov, A Yu; Smirnov, G V; Solomakhin, V B

2012-01-01

The absorption coefficient of the radiation of a repetitively pulsed Nd : YAG laser with an average output power up to 6 W and of a cw ytterbium optical fibre laser with an output power up to 3 kW was measured in the diffusion flame of aviation kerosene burning on a free surface in the atmospheric air. The absorption coefficient as a function of flame length, radiation power, and radiation intensity, which was varied in the ∼10 3 - 5×10 4 W cm -2 range, was obtained for two distances (1 and 2 cm) between the laser beam axis and the surface. The coefficient of radiation absorption by kerosene flame was compared with that in ethanol and kerosene - ethanol mixture flames. The radiation power scattered by a small segment of the kerosene flame irradiated by Nd : YAG laser radiation was measured as a function of longitudinal and azimuthal coordinates. An estimate was made of the total scattered radiation power.

Absorption and scattering of laser radiation by the diffusion flame of aviation kerosene

Science.gov (United States)

Gvozdev, S. V.; Glova, A. F.; Dubrovskii, V. Yu; Durmanov, S. T.; Krasyukov, A. G.; Lysikov, A. Yu; Smirnov, G. V.; Solomakhin, V. B.

2012-04-01

The absorption coefficient of the radiation of a repetitively pulsed Nd : YAG laser with an average output power up to 6 W and of a cw ytterbium optical fibre laser with an output power up to 3 kW was measured in the diffusion flame of aviation kerosene burning on a free surface in the atmospheric air. The absorption coefficient as a function of flame length, radiation power, and radiation intensity, which was varied in the ~103 — 5×104 W cm-2 range, was obtained for two distances (1 and 2 cm) between the laser beam axis and the surface. The coefficient of radiation absorption by kerosene flame was compared with that in ethanol and kerosene — ethanol mixture flames. The radiation power scattered by a small segment of the kerosene flame irradiated by Nd : YAG laser radiation was measured as a function of longitudinal and azimuthal coordinates. An estimate was made of the total scattered radiation power.

Butane and kerosene in data. 26 economical, technical and practical charts

International Nuclear Information System (INIS)

Masse, R.

1990-01-01

Collecting available informations on the butane and kerosene connections in Western African sahelian countries, the aim of this report with its 26 dossiers is to present economical, technical and practical data concerning butane and kerosene present (1990) and potential consumption, utilization and prices, with the overall objective to reduce wood consumption for domestic use. Regional and national data are given and compared. Oil prices, production and consumption in Western Africa are also examined

Artefactos dialógicos: una propuesta para integrar la educación de artes musicales y visuales

Directory of Open Access Journals (Sweden)

Mario Arenas Navarrete

2011-01-01

Full Text Available El propósito de este ensayo es realizar una propuesta para crear unidades de integración de artes musicales y visuales a través de la participación de estudiantes desde 12 a 17 años de edad, aproximadamente, en la creación de "Artefactos Dialógicos", es decir, esculturas sonoras cinéticas e interactivas. La particularidad de estas instalaciones-esculturas es que establecen y explicitan diversos tipos de diálogos con la naturaleza. Corresponden a la cristalización de un proceso iniciado el año 1986 en el Departamento de Música de la Universidad de La Serena, Chile, caracterizado por la defensa de la transversalidad disciplinar, en oposición al especialismo. Han participado estudiantes universitarios y niños de su Escuela Experimental de Música; profesores, artistas visuales, compositores e investigadores. La pretensión de que estudiantes construyan estos artefactos, conlleva cumplir como requisito, su empoderamiento, el desarrollo de su capacidad de agencia y creatividad, para que, en colaboración con profesores de diferentes asignaturas artísticas, científicas y humanísticas, incluyan en la mirada estética, la configuración material y estructural de estos aparatos, integrando, así, racionalismo y expresividad. Todo ello, visualizado a través del filtro epistémico que otorga la educación intercultural, de tal modo de atrapar y proyectar ancestros, gestos, modos, iconografías,2 idiolectos,3 identidades y patrimonio.

Effects of Long-Term Kerosene Spillage on Heterotrophic ...

African Journals Online (AJOL)

Michael Horsfall

ABSTRACT: Kerosene contaminated soil was obtained from four different locations in Calabar while pristine soil served as .... asexual and sexual reproduction structure like sporangia .... Mucor were isolated from both sample types (Table. 4).

Aerosol generation from Kerosene fires

International Nuclear Information System (INIS)

Jordan, S.; Lindner, W.

1981-01-01

The course of solvent surface fires is dependent on the surface area on fire; depth of pool and solvent composition do not influence the fire rate. But the fire rate increases rapidly with the burning area. The residual oxygen concentration after a fire in a closed container is dependent on the violence of the fire, i.e. on the burning surface. Moreover the ending of the fire is influenced by the TBP-concentration of the solvent. With sufficient supply of solvent the TBP-concentration changes only slightly during the fire, so that a fire at 14% O 2 -concentration is extinguished within the container. With the TBP-concentration changing considerably, i.e. little mass, a fire with a similar burning surface is already extinguished at an O 2 -content of 18%. The aerosol generation depends on the fire rate, and so it is higher in free atmosphere than in closed containers. The soot production in the mixture fire (kerosene /TBP 70/30) is higher by a factor 7 than in the pure kerosene fire. Primary soot-particles have a diameter of approximately 0,05 μm and agglomerate rapidly into aggregates of 0,2-0,4 μm. (orig.) [de

Fuel oil and kerosene sales, 1990

International Nuclear Information System (INIS)

1991-01-01

Sales data is presented for kerosene and fuel oils. This is the second year that the survey data have appeared in a separate publication. Prior to the 1989 report, the statistics appeared in the Petroleum Marketing Annual (PMA) for reference year 1988 and the Petroleum Marketing Monthly (PMM) for reference years 1984 through 1987. 4 figs., 24 tabs

Fuel oil and kerosene sales, 1990

Energy Technology Data Exchange (ETDEWEB)

1991-10-10

Sales data is presented for kerosene and fuel oils. This is the second year that the survey data have appeared in a separate publication. Prior to the 1989 report, the statistics appeared in the Petroleum Marketing Annual (PMA) for reference year 1988 and the Petroleum Marketing Monthly (PMM) for reference years 1984 through 1987. 4 figs., 24 tabs.

Black Carbon and Kerosene Lighting: An Opportunity for Rapid Action on Climate Change and Clean Energy for Development

Energy Technology Data Exchange (ETDEWEB)

Jacobson, Arne [Humboldt State Univ., MN (United States). Schatz Energy Research Center; Bond, Tami C. [Univ. of Illinois at Urbana-Champaign, IL (United States). Dept. of Civil and Environmental Engineering; Lam, Nicholoas L. [Univ. of California, Berkeley, CA (United States). Dept. of Environmental Health Sciences; Hultman, Nathan [The Brookings Institution, Washington, DC (United States)

2013-04-15

Replacing inefficient kerosene lighting with electric lighting or other clean alternatives can rapidly achieve development and energy access goals, save money and reduce climate warming. Many of the 250 million households that lack reliable access to electricity rely on inefficient and dangerous simple wick lamps and other kerosene-fueled light sources, using 4 to 25 billion liters of kerosene annually to meet basic lighting needs. Kerosene costs can be a significant household expense and subsidies are expensive. New information on kerosene lamp emissions reveals that their climate impacts are substantial. Eliminating current annual black carbon emissions would provide a climate benefit equivalent to 5 gigatons of carbon dioxide reductions over the next 20 years. Robust and low-cost technologies for supplanting simple wick and other kerosene-fueled lamps exist and are easily distributed and scalable. Improving household lighting offers a low-cost opportunity to improve development, cool the climate and reduce costs.

Tolerance of cultivated and wild plants of different taxonomy to soil contamination by kerosene.

Science.gov (United States)

Sharonova, Natalia; Breus, Irina

2012-05-01

In laboratory experiments on leached chernozem contaminated by kerosene (1-15 wt.%), germination of 50 plants from 21 families (cultivated and wild, annual and perennial, mono- and dicotyledonous) as affected by kerosene type and concentration and plant features was determined. Tested plants formed three groups: more tolerant, less tolerant, and intolerant, in which relative germination was more than 70%, 30-70% and less than 30%, respectively. As parameters of soil phytotoxicity, effective kerosene concentrations (EC) causing germination depression of 10%, 25% and 50% were determined. EC values depended on the plant species and varied in a wide range of kerosene concentrations: 0.02-7.3% (EC(10)), 0.05-8.1% (EC(25)), and 0.2-12.7% (EC(50)). The reported data on germination in soils contaminated by oil and petrochemicals were generalized. The comparison showed that at very high contamination levels (10 and 15%) kerosene was 1.3-1.6 times more phytotoxic than diesel fuel and 1.3-1.4 times more toxic than crude oil, and at low (1 and 2%) and medium (3 and 5%) levels the toxicity of these contaminants was close differing by a factor of 1.1-1.2. Tolerance of plants to soil contamination had a species-specific nature and, on the average, decreased in the following range of families: Fabaceae (germination decrease of 10-60% as compared to an uncontaminated control)>Brassicaceae (5-70%)>Asteraceae (25-95%)>Poaceae (10-100%). The monocotyledonous species tested were characterized as medium- and low-stable to contamination, whereas representatives of dicotyledonous plants were met in all groups of tolerance. Tested wild plants, contrary to reference data on oil toxicity, were more sensitive to kerosene than cultivated. No correlation was observed between degree of plant tolerance to kerosene and mass of seeds. The evidence indicates factors as structure and properties of testa, structure of germ, type of storage compounds, and type of seed germination (underground or

Effects of optical diagnostic techniques on the accuracy of laminar flame speeds measured from Bunsen flames: OH* chemiluminescence, OH-PLIF and acetone/kerosene-PLIF

Science.gov (United States)

Wu, Yi; Modica, Vincent; Yu, Xilong; Li, Fei; Grisch, Frédéric

2018-01-01

The effects of optical diagnostic techniques on the accuracy of laminar flame speed measured from Bunsen flames were investigated. Laminar flame speed measurements were conducted for different fuel/air mixtures including CH4/air, acetone/air and kerosene (Jet A-1)/air in applying different optical diagnostic techniques, i.e. OH* chemiluminescence, OH-PLIF and acetone/kerosene-PLIF. It is found that the OH* chemiluminescence imaging technique cannot directly derive the location of the outer edge of the fresh gases and it is necessary to correct the position of the OH* peak to guarantee the accuracy of the measurements. OH-PLIF and acetone/kerosene-PLIF respectively are able to measure the disappearance of the fresh gas contour and the appearance of the reaction zone. It shows that the aromatic-PLIF technique gives similar laminar flame speed values when compared with those obtained from corrected OH* chemiluminescence images. However, discrepancies were observed between the OH-PLIF and the aromatic-PLIF techniques, in that OH-PLIF slightly underestimates laminar flame speeds by up to 5%. The difference between the flame contours obtained from different optical techniques are further analysed and illustrated with 1D flame structure simulation using detailed kinetic mechanisms.

Partially premixed prevalorized kerosene spray combustion in turbulent flow

Energy Technology Data Exchange (ETDEWEB)

Chrigui, M.; Ahmadi, W.; Sadiki, A.; Janicka, J. [Institute for Energy and Powerplant Technology, TU Darmstadt, Petersenstr. 30, 64287 Darmstadt (Germany); Moesl, K. [Lehrstuhl fuer Thermodynamik, TU Muenchen, Boltzmannstr. 15, D-85747 Garching (Germany)

2010-04-15

A detailed numerical simulation of kerosene spray combustion was carried out on a partially premixed, prevaporized, three-dimensional configuration. The focus was on the flame temperature profile dependency on the length of the pre-vaporization zone. The results were analyzed and compared to experimental data. A fundamental study was performed to observe the temperature variation and flame flashback. Changes were made to the droplet diameter, kerosene flammability limits, a combustion model parameter and the location of the combustion initialization. Investigations were performed for atmospheric pressure, inlet air temperature of 90 C and a global equivalence ratio of 0.7. The simulations were carried out using the Eulerian Lagrangian procedure under a fully two-way coupling. The Bray-Moss-Libby model was adjusted to account for the partially premixed combustion. (author)

Deodorization and dearomatization of kerosene by liquid extraction ...

African Journals Online (AJOL)

Sulphur compounds determination was by the Nickel Reduction Method. The specific gravity, aromatic content, smoke point, flash point, mercaptan sulphur, initial and end boiling points and the k-factor of the kerosene were determined using standard procedures. Also the distribution of sulphur compounds in distillation ...

Artefactos, Artilugios y Artimañas en Arquitectura : una cartografía de relaciones a lo largo del siglo XX

OpenAIRE

Mejías Villatoro, Francisco José

2016-01-01

Esta tesis rastrea la manera particular en la que los conceptos de artefacto, artilugio y artimaña han sucedido a lo largo del siglo XX. Esto es importante pues estos conceptos están estrechamente ligados al nivel de confianza que nos suscita el entorno construido, hecho que es crucial para el trabajo de un arquitecto. Se eligió el siglo XX, porque en él, estos tres conceptos han sucedido de una manera particular. Si históricamente, desde la antigua Grecia hasta el siglo XIX, era frecuente en...

The Design and Construction of a Portable Kerosene Pressure ...

African Journals Online (AJOL)

FIRST LADY

compared to the kerosene alternatives, and at high altitude, the fuel simply fails to work. ... Boiling range at 760mmHg: 151-3010C, ... Solubility in water: insoluble ... stoichiometric amount to increase the chances of complete combustion.

Auditoría energética de las instalaciones de la empresa ecuatoriana de artefactos S.A. “ECASA”

OpenAIRE

Cárdenas Ayala, Byron Mauricio

2017-01-01

Este proyecto realiza una auditoría energética en la empresa Ecuatoriana de Artefactos S.A. ECASA, que fabrica electrodomésticos de línea blanca. Se elabora una línea base del consumo energético actual por unidad producida, se identifican las oportunidades de mejora y se propone la ejecución de las mejoras con cero y bajo costo de implementación. Se entrega un plan de verificación de la implementación de las medidas propuestas. Se inicia el proceso con una evaluación sin mediciones para iden...

ANALISIS PELAKSANAAN PROGRAM KONVERSI MINYAK TANAH KE GAS

Directory of Open Access Journals (Sweden)

Fara Meriyan Sari

2017-04-01

Full Text Available Abstrak :            Penelitian ini dimaksudkan untuk mengetahui pelaksanaan program konversi minyak tanah ke gas di Kota Pekanbaru (studi kasus Kelurahan Tuah Karya dan faktor-faktor apa saja yang mempengaruhi pelaksanaan program konversi minyak tanah ke gas tersebut. Adapun manfaat yang dapat diambil dari hasil penelitian ini nanti nya antara lain, Pertama : untuk mengembangkan dan meningkatkan kemampuan berfikir melaui penerapan teori yang didapat penulis. Kedua : untuk menambah pengetahuan penulis tentang pelaksanaan program konversi minyak tanah ke gas, sebagai pertimbangan dan masukan bagi instansi terkait dan sebagai bahan referensi bagi pihak-pihak yang ingin melakukan penelitian dengan topik atau permasaahan yang sama. Kata Kunci :      Kebijakan, implementasi kebijakan dan program konversi minyak tanah. Abstract :             This research is intended to find out which programme  execution to gas conversion kerosene in the city of Peknabaru (a case study of village of Tuah Karya and the factors that influence the implementation  of any Convention program ground to gas oil. As for the benefits that can be taken from the results of this research would include, among others, first : to develop and enhance the ability to think through the application of the theory in the can author. The second : to add to the knowledge of the author about the implementation of the programme of conversion of kerosene into a gas, as a consideration and input for relevant agencies and as reference material for those who want to do research with the same topic or problem. Keyword :              Policy, implementation of policies and kerosen.

Energy subsidies and costs in urban Ethiopia: The cases of kerosene and electricity

Energy Technology Data Exchange (ETDEWEB)

Kebede, Bereket [School of Development Studies, University of East Anglia, Norwich NR4 7TJ (United Kingdom)

2006-10-15

Making energy affordable to the poor is a widely cited reason for subsidies. Whether subsidies achieve this objective is rarely analysed. In this article, the significance of kerosene and electricity subsidies in relation to the purchasing power of Ethiopian urban households is examined. The results indicate that subsidies on kerosene prices and electricity tariffs do not significantly change the overall costs for households. Even poor households on the average have the purchasing power to access unsubsidised kerosene. The overall costs-including fixed costs-of accessing electricity are very high relative to purchasing power even for the well to do urban households if down payments are made. But when costs are spread over the lifespan of fixed components, even the average poor have the purchasing power to access electricity. These results underscore the importance of a mechanism that spreads fixed costs over longer periods of time. Spreading fixed costs over electricity bills and providing credit facilities are two options that can ameliorate the condition. (author)

Stripping of uranium from Dehpa/kerosene solvents by different aqueous media

International Nuclear Information System (INIS)

Khorfan, S.; Stas, J.; Kassem, M.

1998-01-01

Stripping uranium from Dehpa/kerosene solvent is a crucial step in the recovery of uranium. Stripping was studied using different stripping media mainly ammonium carbonate, phosphoric acid, sulfuric acid, hydrochloric acid and nitric acid. Stripping was measured at different operating conditions such as aqueous concentrations, temperatures, and Dehpa/kerosene concentrations. The results obtained showed that stripping by acid media increases with the acid concentration and follows the order: HF > H 3 PO 4 > H 2 SO 4 > HCl > HNO 3 . To achieve higher stripping by phosphoric acid it was found necessary to increase the temperature to 50 deg C, the acid concentration to 5 mol/l and to reduce the uranium to U 4+ . Stripping by basic media was found to increase with increasing concentration of the stripping media and to follow the order: Na 2 CO 3 > (NH 4 ) 2 CO 3 > NH 4 HCO 3 . Stripping by ammonium carbonate was found to increase with temperature and carbonate concentration. The stripping was optimized at 0.5 mol/l carbonate concentration and at a temperature of 50 deg C. Stripping was decreased by increasing concentration of Dehpa in kerosene and was depressed more by adding the synergant Topo to the Dehpa solvent especially at 1/4 mol/mol ratio. (author)

A two-step chemical scheme for kerosene-air premixed flames

Energy Technology Data Exchange (ETDEWEB)

Franzelli, B.; Riber, E.; Sanjose, M. [CERFACS, CFD Team, 42 Avenue G. Coriolis, 31057 Toulouse Cedex 01 (France); Poinsot, T. [IMFT-UMR 5502, allee du Professeur Camille Soula, 31400 Toulouse (France)

2010-07-15

A reduced two-step scheme (called 2S-KERO-BFER) for kerosene-air premixed flames is presented in the context of Large Eddy Simulation of reacting turbulent flows in industrial applications. The chemical mechanism is composed of two reactions corresponding to the fuel oxidation into CO and H{sub 2}O, and the CO - CO{sub 2} equilibrium. To ensure the validity of the scheme for rich combustion, the pre-exponential constants of the two reactions are tabulated versus the local equivalence ratio. The fuel and oxidizer exponents are chosen to guarantee the correct dependence of laminar flame speed with pressure. Due to a lack of experimental results, the detailed mechanism of Dagaut composed of 209 species and 1673 reactions, and the skeletal mechanism of Luche composed of 91 species and 991 reactions have been used to validate the reduced scheme. Computations of one-dimensional laminar flames have been performed with the 2S{sub K}ERO{sub B}FER scheme using the CANTERA and COSILAB softwares for a wide range of pressure ([1; 12] atm), fresh gas temperature ([300; 700] K), and equivalence ratio ([0.6; 2.0]). Results show that the flame speed is correctly predicted for the whole range of parameters, showing a maximum for stoichiometric flames, a decrease for rich combustion and a satisfactory pressure dependence. The burnt gas temperature and the dilution by Exhaust Gas Recirculation are also well reproduced. Moreover, the results for ignition delay time are in good agreement with the experiments. (author)

[Determination of ru, rh and Pd in 30% trialkyl phosphine oxide (TRPO)-kerosene by inductively coupled plasma-atomic emission spectrum (ICP-AES)].

Science.gov (United States)

Wang, Jian-Chen; Zhang, Lin

2013-07-01

The determination method of Ru, Rh and Pd in 30% TRPO-kerosene ICP-AES was studied by using aqueous calibration reference solution and choosing ethanol as diluent. The effects of the contents of 30% TRPO-kerosene and aqueous solution and the concentration of HNO3 in 30% TRPO-kerosene on the intensities of Ru, Rh and Pd were described. The optimized condition for preparing samples and calibration solutions was chosen as follows: The contents of 30% TRPO-kerosene and aqueous phase were 10% (V/V) and 5% (V/V) respectively and the concentration of HNO3 30% TRPO-kerosene was 0.20 mol x L(-1). The determination method of Au, Ru and Pd was set up according to the above condition. The detection limit, precision and recovery ratio of Ru, Rh and Pd are well. The method is not only used in determination of Au, Ru and Pd in 30% TRPO-kerosene, but also used in other organic phases.

Exploring the possibility of using low-grade ethanol as a kerosene substitute for cooking

International Nuclear Information System (INIS)

Baguant, J.

1990-01-01

The island of Mauritius, with a land area of approximately 2,000 square kilometres, has a population of slightly above one million. Currently the total annual consumption of primary energy, excluding energy consumption for the manufacture of sugar, is around 16 million gj. With limited hydro-power sites and no proven fossil energy reserves, Mauritius depends heavily on imported refined products - fuel oil, diesel, kerosene, gasoline, LPG, and coal - to meets its energy requirements. For example, in 1987 imported energy represented 65 per cent of the total consumption. The remaining 35 per cent was obtained for hydro-power stations (6 per cent), excess bagasse electricity from sugar industries (10 percent) and woody biomass (19 percent). Imported energy represents around 10 to 15 percent of total export earnings. Analysis carried out at the University of Mauritius in order to investigate primary energy consumption by end use has revealed that 4,984,000 gj were consumed in 1987 solely for cooking. This cooking energy represented around 31 percent of the total primary energy consumption for 1987. On a primary energy basis, kerosene supplies up to 20 per cent (952,000 gj) of the cooking energy requirements. The total cost for its import is around Rs 90 million (US$7 million) for 26 x 106 litres, which represents around 10 percent of the total energy import bill. It is important to add that there is no government tax on kerosene used for cooking. Within the general strategy of lessening the island's dependency on imported products through better utilization of local reserves, University of Mauritius researchers have identified low-grade ethanol produced from molasses as a substitute for kerosene. This has been labeled the ethanol/kerosene strategy. The outcome of this exploratory work is presented in this paper

Determination of the trace TBP in industrial feed liquid by gas chromatography

International Nuclear Information System (INIS)

Gao Yuehua; Jiang Junqing; Mu Ling; Yang Songtao

2012-01-01

The determination of the trace TBP in kerosene of the industrial feed liquid by gas chromatography is studied in the paper. It first takes the purification treatment for the kerosene containing trace TBP. The plutonium is removed by 0.2 mol/L ferrous sulfamate-1 mol/L nitric acid using the back-extraction. The uranium and the nitric acid in the organic phase are removed by the deionized water. The impurity which affect the measurement of the TBP and is harmful to the gas chromatograph are eliminated. Then the content of the TBP of the organic phase can be determined by gas chromatography. Results show that the measuring range of the content of the TBP is 0.02% ∼ 2%. The precision of the method is better than 5% and the recovery is between 95%∼106%. (authors)

Experimental investigation on combustion performance of cavity-strut injection of supercritical kerosene in supersonic model combustor

Science.gov (United States)

Sun, Ming-bo; Zhong, Zhan; Liang, Jian-han; Wang, Hong-bo

2016-10-01

Supersonic combustion with cavity-strut injection of supercritical kerosene in a model scramjet engine was experimentally investigated in Mach 2.92 facility with the stagnation temperatures of approximately 1430 K. Static pressure distribution in the axial direction was determined using pressure transducers installed along the centerline of the model combustor top walls. High speed imaging camera was used to capture flame luminosity and combustion region distribution. Multi-cavities were used to and stabilize the combustion in the supersonic combustor. Intrusive injection by thin struts was used to enhance the fuel-air mixing. Supercritical kerosene at temperatures of approximately 780 K and various pressures was prepared using a heat exchanger driven by the hot gas from a pre-burner and injected at equivalence ratios of approximately 1.0. In the experiments, combustor performances with different strut injection schemes were investigated and compared to direct wall injection scheme based on the measured static pressure distributions, the specific thrust increments and the images obtained by high-speed imaging camera. The experimental results showed that the injection by thin struts could obtain an enhanced mixing in the field but could not acquire a steady flame when mixing field cannot well match cavity separation region. There is no significant difference on performance between different schemes since the unsteady intermittent and oscillating flame leads to no actual combustion efficiency improvement.

Investigations on the droplet distributions in the atomization of kerosene jets in supersonic crossflows

Science.gov (United States)

Wu, Liyin; Wang, Zhen-guo; Li, Qinglian; Zhang, Jiaqi

2015-09-01

Phase Doppler anemometry was applied to investigate the atomization processes of a kerosene jet injected into Ma = 1.86 crossflow. Physical behaviors, such as breakup and coalescence, are reproduced through the analysis of the spatial distribution of kerosene droplets' size. It is concluded that Sauter mean diameter distribution shape transforms into "I" type from "C" type as the atomization development. Simultaneously, the breakup of large droplets and the coalescence of small droplets can be observed throughout the whole atomization process.

Oxidative desulphurization study of gasoline and kerosene. Role of some organic and inorganic oxidants

Energy Technology Data Exchange (ETDEWEB)

Shakirullah, M.; Ahmad, Waqas; Ahmad, Imtiaz; Ishaq, M.

2010-11-15

Desulphurization of gasoline and kerosene was carried out using organic and inorganic oxidants. Among the organic oxidants used were hydrogen peroxide in combination with acetic acid, formic acid, benzoic acid and butyric acid, while inorganic oxidants used included potassium permanganate and sodium perchlorate. The oxidation of each petroleum oil was carried out in two steps; the first step consisted of oxidation of the feed at moderate temperature and atmospheric pressure while in the second step, the oxidized mixture was extracted with azeotropic mixture of acetonitrile-water. A maximum desulphurization has occurred with NaClO{sub 4} and hydrogen peroxide and acetic acid, which are 68% and 61%, respectively in case of gasoline and 66% and 63%, respectively in case of kerosene oil. The FTIR study of the whole and variously desulphurized gasoline and kerosene was also carried out. The results indicate considerable desulphurization by absence of bands that corresponds to sulphur moieties in NaClO{sub 4} and hydrogen peroxide treated samples. (author)

Improvement Design of an Existing Atomized Kerosene Stove for ...

African Journals Online (AJOL)

The existing atomized kerosene stove being used in some households in Nigeria does not give room for primary air fuel mixture but secondary one before combustion. This in turn leads to higher specific fuel consumption and ultimately lower thermal efficiency (resulting from low combustion efficiency) of the stove. In order ...

Stripping of uranium from Dehpa/Kerosene solvents by different aqueous media

International Nuclear Information System (INIS)

Khorfan, S.; Stas, J.; Kassem, M.

2000-01-01

Stripping uranium from Dehpa/kerosene solvent is a crucial step in the recovery of uranium. Stripping was studied using different stripping media mainly ammonium carbonate, phosphoric acid, sulfuric acid, hydrochloric acid and nitric acid. Stripping was measured at different operating conditions such as aqueous concentrations, temperatures, and Dehpa/kerosene concentrations. The results obtained showed that stripping by acid media increases with the acid concentration and follows the order: HF > H sub 3 Po sub 4 > H sub 2 S O sub 4 > HCl > HNO sub 3. To achieve higher stripping by phosphoric acid it was found necessary to increase the temperature to 50 deg C, the acid concentration to 5 mol/l and to reduce the uranium to U sup 4 sup +. Stripping by basic media was found to increase with increasing concentration of the stripping media and to follow the order: Na sub 2 CO sub 3 > (NH sub 4) sub 2 CO sub 3 > NH sub 4 HCO sub 3. Stripping by ammonium carbonate was found to increase with temperature and carbonate concentration. The stripping was optimized at 0.5 mol/l carbonate concentration and at a temperature of 50 deg C. Stripping was decreased by increasing concentration of Dehpa in kerosene and was depressed more by adding the synergant TOPO to the Dehpa solvent especially at 1/4 mol/mol ratio. (author)

Investigations on autothermal reforming of kerosene Jet A-1 for supplying solid oxide fuel cells (SOFC); Untersuchungen zur autothermen Reformierung von Kerosin Jet A-1 zur Versorgung oxidkeramischer Festelektrolyt-Brennstoffzellen (SOFC)

Energy Technology Data Exchange (ETDEWEB)

Lenz, B.

2007-01-25

The auxiliary power unit of commercial aircraft is a gas turbine producing electric power with an efficiency of 18 %. This APU can be replaced by a fuel cell system, consisting of an autothermal kerosene reformer and a solid oxide fuel cell (SOFC). The fuel is kerosene Jet A-1. The autothermal reforming of Jet A-1 is practically investigated under variation of steam-to-carbon-ratio, air ratio, space velocity, time in operation and reactor pressure on commercial catalysts. Using stationary system simulation the thermodynamic processes of the device is investigated. Finally, the autothermal reformer and the SOFC consisting of 14 cells are coupled. During this test series, I-V-characteristics are measured, fuel utilisation is calculated and the self-sufficient system operation is shown. (orig.)

Investigations on the droplet distributions in the atomization of kerosene jets in supersonic crossflows

Energy Technology Data Exchange (ETDEWEB)

Wu, Liyin; Wang, Zhen-guo, E-mail: wangzhenguo-wzg@163.com; Li, Qinglian; Zhang, Jiaqi [Science and Technology on Scramjet Laboratory, National University of Defense Technology, Changsha 410073 (China); College of Aerospace and Engineering, National University of Defense Technology, Changsha 410073 (China)

2015-09-07

Phase Doppler anemometry was applied to investigate the atomization processes of a kerosene jet injected into Ma = 1.86 crossflow. Physical behaviors, such as breakup and coalescence, are reproduced through the analysis of the spatial distribution of kerosene droplets' size. It is concluded that Sauter mean diameter distribution shape transforms into “I” type from “C” type as the atomization development. Simultaneously, the breakup of large droplets and the coalescence of small droplets can be observed throughout the whole atomization process.

Investigations on the droplet distributions in the atomization of kerosene jets in supersonic crossflows

International Nuclear Information System (INIS)

Wu, Liyin; Wang, Zhen-guo; Li, Qinglian; Zhang, Jiaqi

2015-01-01

Phase Doppler anemometry was applied to investigate the atomization processes of a kerosene jet injected into Ma = 1.86 crossflow. Physical behaviors, such as breakup and coalescence, are reproduced through the analysis of the spatial distribution of kerosene droplets' size. It is concluded that Sauter mean diameter distribution shape transforms into “I” type from “C” type as the atomization development. Simultaneously, the breakup of large droplets and the coalescence of small droplets can be observed throughout the whole atomization process

Effects of crude kerosene on testosterone levels, aggression and toxicity in rat

Directory of Open Access Journals (Sweden)

Rachel W. Njoroge

2015-01-01

Full Text Available The use of crude kerosene as a dietary supplement in boarding schools has been a common practice in east Africa and other countries for many years, with the belief of it reducing the sex drive (libido at the pubertal stage. There is however no scientific basis for this belief. The present study aimed at using a rat animal model to investigate the effects of crude kerosene on serum testosterone levels, aggression and its possible toxic effects. Fifteen male albino rats of approximately similar age and average weights were put into three groups of five animals each; the control group (placebo, low kerosene dose (10 μl/day group and high kerosene dose (300 μl/day group. ELISA was used to determine the serum testosterone levels. During treatment, changes in aggression were observed and noted. Liver toxicity was determined using enzyme assays, total protein and albumin while renal toxicity was monitored using serum creatinine levels. A full hemogram was conducted to determine hematological effects. Various tissue biopsies were obtained and examined using histopathological techniques for evidence of toxicity. Contrary to the common belief, our findings showed an overall increase of serum testosterone levels of up to 66% in the low dose and 75% in the high dose groups, with an increasing trend by the end of the study. The high dose group showed significantly increased levels of white blood cells (WBC (p = 0.036, red blood cells (RBC (p = 0.025, hematocrit (HCT (p = 0.03, red cell distribution width (p = 0.028 and platelets (p = 0.017. The histological results of the stomach indicated chronic gastritis.

Etnomatemática de um artefacto de latoaria do nordeste transmontano português: a almotolia

Directory of Open Access Journals (Sweden)

Paula Catarino

2014-04-01

Full Text Available Neste artigo damos especial ênfase às matemáticas envolvidas na almotolia – artefacto de latoaria – ao procurarmos contribuir para a valorização, divulgação e preservação de uma das mais antigas artes e ofícios tradicionais – o latoeiro – da região portuguesa de Trás-os-Montes e Alto Douro. Desenvolvemos um estudo sobre saberes (etnomatemáticos envolvidos nos processos de construção da almotolia, apoiados em entrevistas semiestruturadas a cinco latoeiros desta região e em pesquisa bibliográfica e de campo, com recurso à observação participante. Identificamos a utilização de geometria elementar. Com os resultados obtidos é possível criar tarefas matemáticas envolvendo os processos de contrução da almotolia para o ensino básico português (6 a 15 anos.

First performance assessment of blends of jatropha, palm oil and soya bean biodiesel with kerosene as fuel for domestic purposes in rural-Ghana

Energy Technology Data Exchange (ETDEWEB)

Quansah, E.; Preko, K.; Amekudzi, L.K. [Department of Physics, Kwame Nkrumah, University of Science and Technology (KNUST), University Post Office, PMB Kumasi (Ghana)

2011-07-01

Performance assessments of jatropha, palm oil and soya bean based biodiesel were carried out to investigate their potential use as conventional substitute for kerosene for domestic purposes in rural- Ghana. The assessments were done by comparing some of the combustion characteristics of blends of the biodiesel with kerosene. The blends were categorised as B100 (100% biodiesel), B80 (80% biodiesel and 20% kerosene), B60 (60% biodiesel and 40% kerosene), B40 (40% biodiesel and 60% kerosene), B20 (20% biodiesel and 80% kerosene) and B0 (pure kerosene). The results showed that the calorific values of the B100s were less than that of the B0 and decreasing in the order of jatropha, soya bean and palm oil. The wick wastage results for both the B100s and B0, revealed higher rates in the WTL than the BB even though the BB recorded low fuel consumption rates than the WTL for both B100s and B0. Similarly, the luminous intensity test with the B100s showed low values in WTL than the BB in a decreasing order of jatropha, soya bean and palm oil. However, B0 recorded higher luminous intensity values that were quite comparable in both WTL and BB.

Total sulfur determination in gasoline, kerosene and diesel fuel using inductively coupled plasma optical emission spectrometry after direct sample introduction as detergent emulsions

International Nuclear Information System (INIS)

Santelli, Ricardo Erthal; Padua Oliveira, Eliane; Batista de Carvalho, Maria de Fatima; Almeida Bezerra, Marcos; Soares Freire, Aline

2008-01-01

Herein, we present the development of a procedure for the determination of total sulfur in petroleum-derived products (gasoline, kerosene and diesel fuel) employing inductively coupled plasma optical emission spectrometry (ICP OES). For this procedure, samples were prepared as emulsions that were made using concentrated nitric acid, Triton X-100, sample, and ultra pure water in proportions of 5/10/7/78% (v/v), respectively. Sample volumes were weighed because of the density differences, and oxygen was added to the sheat gas entrance of the ICP OES in order to decrease carbon deposition in the torch and to minimize background effects. A Doehlert design was applied as an experimental matrix to investigate the flow ratios of argon (sheat and plasma gas) and oxygen in relation to the signal-to-background ratio. A comparative study among the slopes of the analytical curves built in aqueous media, surfactant/HNO 3 , and by spike addition for several sample emulsions indicates that a unique solution of surfactant in acidic media can be employed to perform the external calibration for analysis of the emulsions. The developed procedure allows for the determination of the total sulfur content in petroleum derivatives with a limit of detection (LOD) and limit of quantification (LOQ) of 0.72 and 2.4 μg g -1 , respectively. Precision values, expressed as the relative standard deviations (% RSD, n = 10) for 12 and 400 μg g -1 , were 2.2% and 1.3%, respectively. The proposed procedure was applied toward the determination of total sulfur in samples of gasoline, kerosene, and diesel fuel commercialized in the city of Niteroi/RJ, Brazil. The accuracy of the proposed method was evaluated by the determination of the total sulfur in three different standard reference materials (SRM): NIST 2723a (sulfur in diesel fuel oil), NIST 1616b (sulfur in kerosene), and NIST 2298 (sulfur in gasoline). The data indicate that the methodology can be successfully applied to these types of samples

The Production of Biodiesel and Bio-kerosene from Coconut Oil Using Microwave Assisted Reaction

Science.gov (United States)

SAIFUDDIN, N.; SITI FAZLILI, A.; KUMARAN, P.; PEI-JUA, N.; PRIATHASHINI, P.

2016-03-01

Biofuels including biodiesel, an alternative fuel, is renewable, environmentally friendly, non-toxic and low emissions. The raw material used in this work was coconut oil, which contained saturated fatty acids about 90% with high percentage of medium chain (C8-C12), especially lauric acid and myristic acid. The purpose of this research was to study the effect of power and NaOH catalyst in transesterification assisted by microwave for production of biofuels (biodiesel and bio-kerosene) derived from coconut oil. The reaction was performed with oil and methanol using mole ratio of 1:6, catalyst concentration of 0.6% with microwave power at 100W, 180W, 300W, 450W, 600W, and 850W. The reaction time was set at of 3, 5, 7, 10 and 15 min. The results showed that microwave could accelerate the transesterification process to produce biodiesel and bio-kerosene using NaOH catalyst. The highest yield of biodiesel was 97.17 %, or 99.05 % conversion at 5 min and 100W microwave power. Meanwhile, the bio-kerosene obtained was 65% after distillation.

Effect Of Inhalation Exposure To Kerosene And Petrol-Fumes On ...

African Journals Online (AJOL)

Changes in total body weight, some anaemia-diagnostic indices (haematocrit or packed cell volume (PCV), haemoglobin (Hb) and total serum protein) were determined in rats (Wistar albino strain) after 2 weeks of 4 hours daily inhalation exposure to ungraded concentrations of kerosene and petrol fumes. The results ...

40 CFR 80.525 - What requirements apply to kerosene blenders?

Science.gov (United States)

2010-07-01

... PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Motor Vehicle Diesel Fuel; Nonroad, Locomotive, and Marine Diesel Fuel; and ECA Marine Fuel Motor Vehicle Diesel Fuel Standards and Requirements § 80... means any refiner who produces NRLM or motor vehicle diesel fuel by adding kerosene to NRLM or motor...

Cooling process of liquid propellant rocket by means of kerosene-alumina nanofluid

Directory of Open Access Journals (Sweden)

Mostafa Mahmoodi

2016-12-01

Full Text Available Heat transfer augmentation of kerosene-alumina nanofluid is studied for the possible use in the regenerative cooling channel of semi cryogenic engine. The basic partial differential equations are reduced to ordinary differential equations which are solved using differential transformation method. Velocity and temperature profiles as well as the skin friction coefficient and Nusselt number are determined. The influence of pertinent parameters such as nanofluid volume fraction, viscosity parameter and Eckert number on the flow and heat transfer characteristics is discussed. The results indicate that adding alumina into the fuel of liquid rocket engine (kerosene can be considered as the way of enhancing cooling process of chamber and nozzle walls. Nusselt number is an increasing function of viscosity parameter and nanoparticle volume fraction while it is a decreasing function of Eckert number.

Solar kerosene from H2O and CO2

Science.gov (United States)

Furler, P.; Marxer, D.; Scheffe, J.; Reinalda, D.; Geerlings, H.; Falter, C.; Batteiger, V.; Sizmann, A.; Steinfeld, A.

2017-06-01

The entire production chain for renewable kerosene obtained directly from sunlight, H2O, and CO2 is experimentally demonstrated. The key component of the production process is a high-temperature solar reactor containing a reticulated porous ceramic (RPC) structure made of ceria, which enables the splitting of H2O and CO2 via a 2-step thermochemical redox cycle. In the 1st reduction step, ceria is endo-thermally reduced using concentrated solar radiation as the energy source of process heat. In the 2nd oxidation step, nonstoichiometric ceria reacts with H2O and CO2 to form H2 and CO - syngas - which is finally converted into kerosene by the Fischer-Tropsch process. The RPC featured dual-scale porosity for enhanced heat and mass transfer: mm-size pores for volumetric radiation absorption during the reduction step and μm-size pores within its struts for fast kinetics during the oxidation step. We report on the engineering design of the solar reactor and the experimental demonstration of over 290 consecutive redox cycles for producing high-quality syngas suitable for the processing of liquid hydrocarbon fuels.

[Comparative studies on the toxicity of various dieelectrics, kerosene derivatives, used in the electroerosion technic. I. Morphological, cytoenzymatic and biochemical changes in the liver of rats chronically exposed to kerosene hydrocarbons].

Science.gov (United States)

Starek, A; Kamiński, M

1982-01-01

Rats exposed to cosmetic kerosene mists (odourless kerosene), concentration of 75 and 300 mg/m3 for 14 days, underwent morphological and cytoenzymatic liver tests and biochemical tests of lipids composition in this organ. In addition, lipids concentration and activity of test--enzymes in blood serum were determined. The findings were: passive congestion, fine--droplet fatty degeneration in I zones of clusters and increased number of Browicz--Kupffer's phagocytes near liver triads. Those changes were accompanied by: decreased activity of succinic dehydrogenese (SDH), tetrazolic NADPH--reductase (NADPH-r.t.) and glucose-6-phosphatase (G-6-P-ase) and increased activity of adenosine triphosphatase (Mg++-ATP-ase) and acid phosphatase (AcP). In blood serum medium increase of base phosphatase (AP), 5-nucleotidase (5-Nt) and leucyloaminepeptidase (LAP) and decreased activity of prothrombin (Pt) were found. In addition, it was demonstrated that liver steatosis was characterized by cumulation of free fatty acids, phospholipids and cholesterol esters with simultaneous decrease in triglycerides content in this organ. The obtained results indicate that changes induced by kerosene hydrocarbons in liver are focal and cumulate in I zones of liver clusters. The degree of lesion varies with the extent of exposure, and results from toxic effects of this preparation on hepatic cells lypoproteid membranes.

Jet fuel kerosene is not immunosuppressive in mice or rats following inhalation for 28 days.

Science.gov (United States)

White, Kimber L; DeLorme, Michael P; Beatty, Patrick W; Smith, Matthew J; Peachee, Vanessa L

2013-01-01

Previous reports indicated that inhalation of JP-8 aviation turbine fuel is immunosuppressive. However, in some of those studies, the exposure concentrations were underestimated, and percent of test article as vapor or aerosol was not determined. Furthermore, it is unknown whether the observed effects are attributable to the base hydrocarbon fuel (jet fuel kerosene) or to the various fuel additives in jet fuels. The present studies were conducted, in compliance with Good Laboratory Practice (GLP) regulations, to evaluate the effects of jet fuel kerosene on the immune system, in conjunction with an accurate, quantitative characterization of the aerosol and vapor exposure concentrations. Two female rodent species (B6C3F1 mice and Crl:CD rats) were exposed by nose-only inhalation to jet fuel kerosene at targeted concentrations of 0, 500, 1000, or 2000 mg/m(3) for 6 h daily for 28 d. Humoral, cell-mediated, and innate immune functions were subsequently evaluated. No marked effects were observed in either species on body weights, spleen or thymus weights, the T-dependent antibody-forming cell response (plaque assay), or the delayed-type hypersensitivity (DTH) response. With a few exceptions, spleen cell numbers and phenotypes were also unaffected. Natural killer (NK) cell activity in mice was unaffected, while the NK assessment in rats was not usable due to an unusually low response in all groups. These studies demonstrate that inhalation of jet fuel kerosene for 28 d at levels up to 2000 mg/m(3) did not adversely affect the functional immune responses of female mice and rats.

The Design and Construction of a Portable Kerosene Pressure-Cooker

African Journals Online (AJOL)

African Research Review ... The existing cookers and the problems associated with them were analyzed. ... Using the principles of fluid dynamics, this work was able to establish that the power of the cooker is 179.922KW, and that under a constant pressure of IMPa the cooker will discharge and burn 1 litre of kerosene in 3.5 ...

Polycyclic aromatic hydrocarbon emissions from the combustion of alternative fuels in a gas turbine engine.

Science.gov (United States)

Christie, Simon; Raper, David; Lee, David S; Williams, Paul I; Rye, Lucas; Blakey, Simon; Wilson, Chris W; Lobo, Prem; Hagen, Donald; Whitefield, Philip D

2012-06-05

We report on the particulate-bound polycyclic aromatic hydrocarbons (PAH) in the exhaust of a test-bed gas turbine engine when powered by Jet A-1 aviation fuel and a number of alternative fuels: Sasol fully synthetic jet fuel (FSJF), Shell gas-to-liquid (GTL) kerosene, and Jet A-1/GTL 50:50 blended kerosene. The concentration of PAH compounds in the exhaust emissions vary greatly between fuels. Combustion of FSJF produces the greatest total concentration of PAH compounds while combustion of GTL produces the least. However, when PAHs in the exhaust sample are measured in terms of the regulatory marker compound benzo[a]pyrene, then all of the alternative fuels emit a lower concentration of PAH in comparison to Jet A-1. Emissions from the combustion of Jet A-1/GTL blended kerosene were found to have a disproportionately low concentration of PAHs and appear to inherit a greater proportion of the GTL emission characteristics than would be expected from volume fraction alone. The data imply the presence of a nonlinear relation between fuel blend composition and the emission of PAH compounds. For each of the fuels, the speciation of PAH compounds present in the exhaust emissions were found to be remarkably similar (R(2) = 0.94-0.62), and the results do provide evidence to support the premise that PAH speciation is to some extent indicative of the emission source. In contrast, no correlation was found between the PAH species present in the fuel with those subsequently emitted in the exhaust. The results strongly suggests that local air quality measured in terms of the particulate-bound PAH burden could be significantly improved by the use of GTL kerosene either blended with or in place of Jet A-1 kerosene.

26 CFR 48.4082-1 - Diesel fuel and kerosene; exemption for dyed fuel.

Science.gov (United States)

2010-04-01

... (CONTINUED) MISCELLANEOUS EXCISE TAXES MANUFACTURERS AND RETAILERS EXCISE TAXES Motor Vehicles, Tires, Tubes... barrels of diesel fuel or kerosene; or (2) Any dye of a type and in a concentration that has been approved...

Studies on the Conditioning Methods of Spent Tri-butyl Phosphate/Kerosene and its Degradation Product in Different Matrices

International Nuclear Information System (INIS)

El-Dessouky, M.I.; El-sourougy, M.R.; Abed El-Aziz, M.M.; Aly, H.F.

1999-01-01

The destruction of spent TBP/Kerosene (odourless Kerosene (OK)) with potassium permanganate have been investigated. Comparative studies on the immobilization of spent TBP/Kerosene and its degradation product into different matrices have been carried out. The matrices used include, ordinary Portland cement, silica fume, treated fly ash, epoxy resin and cement mixed with epoxy resin.The different factors affecting solidified waste forms such as, compressive strength, water resistance, thermal stability, chemical resistance, radiological stability and leachability have been investigated. It was found that, epoxy resin and cement mixed with 5,10,20, and 50% of epoxy resin enhance the compressive strength of the solidified waste forms with spent TBP/OK more than that obtained from degradation products. The leaching rates of 152 and 154 Eu and 181 Hf from waste forms containing TBP/OK was found lower than that with degradation product

Research on electrostatic electrification during jet kerosene spraying

International Nuclear Information System (INIS)

Liu, Quanzhen; Li, Yipeng; Zhang, Wentian; Sun, Keping

2013-01-01

Multiple electrostatic electrifications during aircraft fuelling process may cause a fire disaster or explosion, so study on the protection measure for electrostatic electrification is very important for the security of aircraft fuelling. This paper investigated the electrostatic voltage and charge of the fuel nozzle and metal parts during the fuel spraying by self-designed jet kerosene spraying electrostatic electrification test system. The experimental results indicate that the voltage on the fuel nozzle and metal parts is very dangerous for electrostatic safety if they are not reliably grounded.

Liquid-liquid extraction of uranium (VI) using Cyanex 272 in kerosene from sodium salicylate medium

International Nuclear Information System (INIS)

Kamble, Pravin N.; Mohite, Baburao S.; Suryavanshi, Vishal J.; Salunkhe, Suresh T.

2015-01-01

Liquid-liquid extraction of uranium (VI) from sodium salicylate media using Cyanex 272 in kerosene has been carried out. Uranium (VI) was quantitatively extracted from 1x10 -4 M sodium salicylate with 5x10 -4 M Cyanex 272 in kerosene. It was stripped quantitatively from the organic phase with 4M HCl and determined spectrophotometrically with arsenazo(III) at 600 nm. The effects of concentrations of sodium salicylate, metal ions and strippants have been studied. Separation of uranium (VI) from other elements was achieved from binary as well as from multicomponent mixtures. The method is simple, rapid and selective with good reproducibility (approximately ±2%). (author)

Liquid-liquid extraction of beryllium (II) using Cyanex 923 in kerosene from sodium acetate medium

International Nuclear Information System (INIS)

Kamble, Pravin N.; Madane, Namdev S.; Mohite, Baburao S.

2013-01-01

Liquid-liquid extraction of beryllium(II) from sodium acetate media using cyanex 923 in kerosene has been carried out. Beryllium(II) was quantitatively extracted from 1x10 -1 M sodium acetate with 1x10 -2 M cyanex 923 in kerosene. It was stripped quantitatively from the organic phase with 1M H 2 SO 4 and determined spectrophotometrically with eriochrome cyanine R at 525 nm. The effect of concentrations of sodium acetate, metal ions and strippants have been studied. Separation of beryllium(II) from other elements was achieved from binary as well as from multicomponent mixtures. The method is simple, rapid and selective with good reproducibility (approximately±2%). (author)

Human Health Assessment of Alcohol To Jet (ATJ) Synthetic Kerosenes

Science.gov (United States)

2016-07-30

workplace . 15. SUBJECT TERMS Jet fuels, alternative fuels, synthetic kerosene, JP-8, biobased/bio-based, toxicity/toxicology, alcohol-to-jet, toxicity...ATJ fuels alone, or in a blend with petroleum-derived JP-8, is unlikely to increase human health risks in the military workplace . Therefore, the... pregnancy rate, gestation length, or number of pups per litter. The female-only exposure did result in decreased pup weights in the highest dose group

Generation and mid-IR measurement of a gas-phase to predict security parameters of aviation jet fuel.

Science.gov (United States)

Gómez-Carracedo, M P; Andrade, J M; Calviño, M A; Prada, D; Fernández, E; Muniategui, S

2003-07-27

The worldwide use of kerosene as aviation jet fuel makes its safety considerations of most importance not only for aircraft security but for the workers' health (chronic and/or acute exposure). As most kerosene risks come from its vapours, this work focuses on predicting seven characteristics (flash point, freezing point, % of aromatics and four distillation points) which assess its potential hazards. Two experimental devices were implemented in order to, first, generate a kerosene vapour phase and, then, to measure its mid-IR spectrum. All the working conditions required to generate the gas phase were optimised either in a univariate or a multivariate (SIMPLEX) approach. Next, multivariate prediction models were deployed using partial least squares regression and it was found that both the average prediction errors and precision parameters were satisfactory, almost always well below the reference figures.

Artefactos de la cultura organizacional y su efecto sobre la adopción de prácticas compasivas en una organización prestadora de servicios de salud

OpenAIRE

Amaya Espitia, Marysella; Salcedo Díaz, Wilmer

2017-01-01

La compasión en las organizaciones y sus determinantes son un tema de investigación que aún se encuentra poco desarrollado, en consecuencia, se realizó un estudio con una muestra de 112 empleados en una organización prestadora de servicios de salud en la ciudad de Bogotá. Para lograr dicho objetivo, se administró el cuestionario de Artefactos de la Cultura Organizacional OCSA y el cuestionario de Prácticas Organizacionales Compasivas. Los resultados obtenidos muestran que la cultura organizac...

Experimental investigation on flow patterns of RP-3 kerosene under sub-critical and supercritical pressures

Science.gov (United States)

Wang, Ning; Zhou, Jin; Pan, Yu; Wang, Hui

2014-02-01

Active cooling with endothermic hydrocarbon fuel is proved to be one of the most promising approaches to solve the thermal problem for hypersonic aircraft such as scramjet. The flow patterns of two-phase flow inside the cooling channels have a great influence on the heat transfer characteristics. In this study, phase transition processes of RP-3 kerosene flowing inside a square quartz-glass tube were experimentally investigated. Three distinct phase transition phenomena (liquid-gas two phase flow under sub-critical pressures, critical opalescence under critical pressure, and corrugation under supercritical pressures) were identified. The conventional flow patterns of liquid-gas two phase flow, namely bubble flow, slug flow, churn flow and annular flow are observed under sub-critical pressures. Dense bubble flow and dispersed flow are recognized when pressure is increased towards the critical pressure whilst slug flow, churn flow and annular flow disappear. Under critical pressure, the opalescence phenomenon is observed. Under supercritical pressures, no conventional phase transition characteristics, such as bubbles are observed. But some kind of corrugation appears when RP-3 transfers from liquid to supercritical. The refraction index variation caused by sharp density gradient near the critical temperature is thought to be responsible for this corrugation.

The design of a kerosene turbopump for a South African commercial launch vehicle

CSIR Research Space (South Africa)

Snedden, Glen C

2012-08-01

Full Text Available A South African turbopump design capability would be critical to any future indigenous commercial launch capacity. This paper describes the initial work being done at the University of KwaZulu-Natal (UKZN) to design a kerosene turbopump for a...

Performance Testing of Diesel Engine using Cardanol-Kerosene oil blend

Directory of Open Access Journals (Sweden)

Ravindra

2018-01-01

Full Text Available Awareness of environmental pollution and fossil fuel depletion has necessitated the use of biofuels in engines which have a relatively cleaner emissions. Cardanol is a biofuel, abundantly available in India, which is a by-product of cashew processing industries. In this study performance of raw Cardanol blended with kerosene has been tested in diesel engine. Volumetric blend BK30 (30% kerosene and 70% Cardanol has been used for the test. The properties like flash point, viscosity and calorific value of the blend have been determined. The test was carried out in four stroke diesel engine connected with an eddy current dynamometer. Performance of the engine has been analysed by finding the brake specific fuel consumption (BSFC and brake thermal efficiency (BTE. The results showed that the brake thermal efficiency of the blend is 29.87%, with less CO and smoke emission compared to diesel. The results were also compared with the performance of Cardanol diesel blend and Cardanol camphor oil blend, which were already tested in diesel engines by other researchers. Earlier research work reveals that the blend of 30% camphor oil and 70% Cardanol performs very closer to diesel fuel with a thermal efficiency of 29.1%. Similarly, higher brake thermal efficiency was obtained for 20% Cardanol and 80% diesel blend.

Nitrogen dioxide and kerosene-flame soot calibration of photoacoustic instruments for measurement of light absorption by aerosols

International Nuclear Information System (INIS)

Arnott, W. Patrick; Moosmu''ller, Hans; Walker, John W.

2000-01-01

A nitrogen dioxide calibration method is developed to evaluate the theoretical calibration for a photoacoustic instrument used to measure light absorption by atmospheric aerosols at a laser wavelength of 532.0 nm. This method uses high concentrations of nitrogen dioxide so that both a simple extinction and the photoacoustically obtained absorption measurement may be performed simultaneously. Since Rayleigh scattering is much less than absorption for the gas, the agreement between the extinction and absorption coefficients can be used to evaluate the theoretical calibration, so that the laser gas spectra are not needed. Photoacoustic theory is developed to account for strong absorption of the laser beam power in passage through the resonator. Findings are that the photoacoustic absorption based on heat-balance theory for the instrument compares well with absorption inferred from the extinction measurement, and that both are well within values represented by published spectra of nitrogen dioxide. Photodissociation of nitrogen dioxide limits the calibration method to wavelengths longer than 398 nm. Extinction and absorption at 532 and 1047 nm were measured for kerosene-flame soot to evaluate the calibration method, and the single scattering albedo was found to be 0.31 and 0.20 at these wavelengths, respectively

Biodegradation of kerosene: Study of growth optimization and metabolic fate of P. janthinellum SDX7

Directory of Open Access Journals (Sweden)

Shamiyan R. Khan

2015-06-01

Full Text Available Penicillum janthinellum SDX7 was isolated from aged petroleum hydrocarbon-affected soil at the site of Anand, Gujarat, India, and was tested for different pH, temperature, agitation and concentrations for optimal growth of the isolate that was capable of degrading upto 95%, 63% and 58% of 1%, 3% and 5% kerosene, respectively, after a period of 16 days, at optimal growth conditions of pH 6.0, 30 °C and 180 rpm agitation. The GC/MS chromatograms revealed that then-alkane fractions are easily degraded; however, the rate might be lower for branched alkanes, n-alkylaromatics, cyclic alkanes and polynuclear aromatics. The test doses caused a concentration-dependent depletion of carbohydrates of P. janthinellum SDX7 by 3% to 80%, proteins by 4% to 81% and amino acids by 8% to 95% upto 16 days of treatment. The optimal concentration of 3% kerosene resulted in the least reduction of the metabolites of P. janthinellum such as carbohydrates, proteins and amino acids with optimal growth compared to 5% and 1% (v/v kerosene doses on the 12th and 16th day of exposure. Phenols were found to be mounted by 43% to 66% at lower and higher concentrations during the experimental period. Fungal isolate P. janthinellum SDX7 was also tested for growth on various xenobiotic compounds.

26 CFR 48.6427-10 - Kerosene; claims by registered ultimate vendors (blocked pumps).

Science.gov (United States)

2010-04-01

... (blocked pumps). 48.6427-10 Section 48.6427-10 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE...; claims by registered ultimate vendors (blocked pumps). (a) Overview. This section provides rules under... allowed by section 6427(l)(5)(B)(i). These claims relate to kerosene sold from a blocked pump. Claims...

Health risk assessment of kerosene usage in an informal settlement in Durban, South Africa

CSIR Research Space (South Africa)

Muller, E

2003-05-01

Full Text Available In Durban, South Africa studies have shown that more than seven out of ten households in low-income metropolitan areas rely on kerosene for domestic purposes, leading to widespread problems of poor indoor air quality. In light of the known health...

Study of condensate composition during field processing of gas of the Shatlyk field

Energy Technology Data Exchange (ETDEWEB)

Kuldzhayev, B.A.; Annamukhamedov, M.B.; Makarov, V.V.; Serbnenko, S.R.; Talalayev, Ye.I.

1983-01-01

Studies were made of the composition and properties of condensates from field separators of the East Shatlyk field. The expediency is shown of separate collection of the condensates into a separate container and used for local needs as the diesel fuel. The condensates from the UNTS separators are used as chemical raw material to produce the lowest olephins by pyrolysis of gas-oil fraction and normal paraffins from kerosene-gas-oil part to obtain the protein-vitamin concentrates.

Methods of Uranium Determination in solutions of Tributyl Phosphate and Kerosene

International Nuclear Information System (INIS)

Petrement Eguiluz, J.; Palomares Delgado, F.

1962-01-01

A new analytical method for the determination of uranium in organic solutions of tributyl phosphate and kerosene is proposed. In this method the uranium is reextracted from the aqueous phase by reduction with cadmium in acid solution. The uranium can be determined in this solution by the usual methods. In case of very diluted solutions, a direct spectrophtometrical determination of uranium in the organic phase with dibenzoylmethane is proposed. (Author) 21 refs

Reaction of nitrous acid with U(IV) and nitric acid in 30% TBP-kerosene solution

International Nuclear Information System (INIS)

Xu Xiangrong; Hu Jingxin; Huang Huaian; Qiu Xiaoxi

1990-01-01

Reaction of nitrous acid with U(IV) and nitric acid in 30% TBP-kerosene solution is investigated, the rate equations of oxidation of U(IV) by nitrous acid and that of nitrous acid reacting with nitric acid are obtained

Cowdung gas plant gets popular in U. P

Energy Technology Data Exchange (ETDEWEB)

Das, R

1962-12-01

Work at the Planning Research and Action Institute, Lucknow, was confined from 1957 to 1959 to constructing gas plants of 2.83 m/sup 3/ gas production capacity per day. A demonstration plant on the premises produced gas for lighting and cooking. Successful research at Chinhat demonstrated that small gasoline and kerosene engines could be run on the gas through carburetor modifications. Since 1960 workers at the gobar-gas research center at Ajitmal have developed a two-stage digester system of combined volume of 63.8 m/sup 3/ with a 35.5 m/sup 3/ gasholder. The primary digester is heated and mixed, gravity fed, and passes the slurry through a siphon to the secondary digester. Work continues on the conversion of diesel engines to biogas, the use of the gas for welding, development of stoves on which to bake flatbread, and more efficient use of the effluent.

An Assessment Of Physicochemical Properties, Heavy Metal Enrichment And Fungal Characterization Of Refined Kerosene Impacted Soil In Anand, Gujarat, India

Directory of Open Access Journals (Sweden)

Shamiyan R Khan

2013-12-01

Full Text Available The present study was carried out to assess the physico-chemical properties, heavy metal enrichment and fungal isolation and characterization of the top soil samples collected in-situ from aged refined kerosene contaminated as well as uncontaminated garden soil sites in Anand, Gujarat, India. The total petroleum hydrocarbon (TPH concentrations were 17,510 mg/kg in kerosene contaminated soil against 142.65 mg/kg for uncontaminated soils. The contamination increased the soil organic carbon, nitrogen and clay to 2.95 %, 0.612 %, 36.22 % as compared to 1.5%, 0.153%, 32.4% respectively in the uncontaminated soil. Increased concentration of heavy metals like Cobalt, Copper, Iron, Zinc and Lead against the uncontaminated soil was encountered. Ten native fungal speciesbelonging to a total of five genera include Aspergillus (A. terreus, A. versicolor, A. niger; Fusarium oxysporum; Penicilliumjanthinellum from the uncontaminated garden soil, whereas the contaminated soil included Aspergillus (A. terreus, A. versicolor , A. niger Candida tropicalis,Cladosporiumbruhnei and Fusarium oxysporum, identified based on 18S rRNA and the nucleotide sequences were submitted to the NCBI, GenBank database. The changes created by kerosene contamination resulted in variation in individual concentrations of physicochemical properties, soil conductivity, pH and soil fertility indices probably dwindle the growth of fungal strains causing a reduction in the fungal population in the kerosene contaminated soil. International Journal of Environment, Volume-2, Issue-1, Sep-Nov 2013, Pages 164-174 DOI: http://dx.doi.org/10.3126/ije.v2i1.9219

Clinical and therapeutic aspects of childhood kerosene poisoning in Djibouti.

Science.gov (United States)

Benois, Alain; Petitjeans, Fabrice; Raynaud, Laurent; Dardare, Eric; Sergent, Hervé

2009-10-01

We report a prospective and descriptive study about childhood acute poisoning with kerosene in Djibouti. Acute poisoning is a common and stable occurrence in low socioeconomic groups in Africa, where negligence is the main cause of poisoning. The respiratory system was the main target, with 41% of patients having pneumonia, which may become life-threatening, but with low mortality rate. Asymptomatic patients (35%) can be discharged, while those with pulmonary or neurological signs must be admitted for observation and supportive treatment based on oxygen administration. Our study suggests management and provides a discussion for therapeutic options and emphasizes the importance of prevention.

DIRECTRICES PARA LA CONSTRUCCIÓN DE ARTEFACTOS DE PERSISTENCIA EN EL PROCESO DE DESARROLLO DE SOFTWARE

Directory of Open Access Journals (Sweden)

Juan Bernardo Quintero

2008-07-01

Full Text Available El almacenamiento de datos es uno de los procesos que se halla en casi la totalidad de los sistemas de información. El tratamiento que se les da a las bases de datos durante el desarrollo de software resulta un factor determinante para el buen desempeño de un sistema. La acelerada evolución tecnológica y el desarrollo de la industria del software han conducido al surgimiento de diversas estrategias de modelado y numerosas técnicas de acceso a datos. En este trabajo se precisan los referentes conceptuales y prácticos para la construcción de los productos relacionados con las bases de datos, el acceso a estas y el tratamiento que se les da en la industria a los llamados artefactos de persistencia.Data storage is a process required in almost every information system nowadays; the treatment given to databases during the software development can be a determining factor in order to achieve good performance of a resulting system. The accelerated technological evolution and the progress of the software enterprises have given rise to diverse modeling strategies and several data access techniques. This work explains the practical and conceptual references for the construction of products related to databases, the access techniques to them and the handling that so-called persistence artifacts have at an industrial level.

Extractive separation of Al(III) and Ni(II) by Di-2-Ethylhexyl phosphoric acid-kerosene system from aqueous fluoride medium

International Nuclear Information System (INIS)

Islam, M.F.; Begum, D.A.; Rahman, M.; Rahman, M.S.

2009-01-01

In the study of the extractive separation of Al(III) and Ni(II) by di-2-ethylhexyl phosphoric acid D2EHPA-kerosene from aqueous fluoride medium, about 94% Al(III) and 2% Ni(II) were extracted with 0.3 M D2EHPA (pH 2.1 and temperature 30+-1 degree C). Extraction of Ni(II) decreased with increasing extractant concentration. D2EHPA-kerosene-fluoride system showed better extraction of Al(III) with higher extractant concentration and aqueous pH and vice versa for the extraction of Ni(II). The maximum separation factor (beta 1380) was obtained for Al(III) at 20 degree C and decreased to (beta 732) at 60 degree C. The separation of Al(III) from Ni(II) was favoured at normal temperature. Extraction followed the order Al(III), Ni(II). About 99% stripping of Al(III) was attained from the loaded 0.20 M D2EHPA. Much faster extraction of Al(III) compared to Ni(II) and preferential loading were shown by D2EHPA-kerosene in the presence of fluoride ion in the aqueous phase. Separation of Al(III) was the most outstanding from Ni-Al-F-complex solution. (author)

Economical Utilization of Associated Gas in Nigeria

Directory of Open Access Journals (Sweden)

Lukman Obayopo Alimi

2014-07-01

Full Text Available Oil production is often accompanied by associated natural gas as valuable by-product of oil processing. Large amount of this vital energy component is flared during these processes, mostly in developing countries. For a longer period of time more gas is flares in Nigeria than anywhere else in Africa and second to Russian in the world, with daily estimates of roughly 2.5 billion cubic feet. This is equivalent to around 40% of all Africa´s natural gas consumption, and annual financial loss to Nigeria is about 1.8 billion Euros. Gas flaring contributes to major environmental pollution problems, which affects oil producing areas of the Niger Delta in Nigeria. This research attempts to look into the environmental issues in the region and proposes possible solutions, with recommendations that will contribute to improve associated gas utilization. This study describes gas to liquid (GTL conversion technology as a sustainable option to utilize associated gas in Nigeria, and also evaluates the economic attractiveness of the process. This conversion technology could contribute to total elimination of gas flaring and reduces the overdependence on importation of refined products (petrol, diesel and kerosene from foreign countries into Nigeria.

Comparison of alternate fuels for aircraft. [liquid hydrogen, liquid methane, and synthetic aviation kerosene

Science.gov (United States)

Witcofski, R. D.

1979-01-01

Liquid hydrogen, liquid methane, and synthetic aviation kerosene were assessed as alternate fuels for aircraft in terms of cost, capital requirements, and energy resource utilization. Fuel transmission and airport storage and distribution facilities are considered. Environmental emissions and safety aspects of fuel selection are discussed and detailed descriptions of various fuel production and liquefaction processes are given. Technological deficiencies are identified.

Three-Dimensional Numerical Analysis of LOX/Kerosene Engine Exhaust Plume Flow Field Characteristics

Directory of Open Access Journals (Sweden)

Hong-hua Cai

2017-01-01

Full Text Available Aiming at calculating and studying the flow field characteristics of engine exhaust plume and comparative analyzing the effects of different chemical reaction mechanisms on the engine exhaust plume flow field characteristics, a method considering fully the combustion state influence is put forward, which is applied to exhaust plume flow field calculation of multinozzle engine. On this basis, a three-dimensional numerical analysis of the effects of different chemical reaction mechanisms on LOX/kerosene engine exhaust plume flow field characteristics was carried out. It is found that multistep chemical reaction can accurately describe the combustion process in the LOX/kerosene engine, the average chamber pressure from the calculation is 4.63% greater than that of the test, and the average chamber temperature from the calculation is 3.34% greater than that from the thermodynamic calculation. The exhaust plumes of single nozzle and double nozzle calculated using the global chemical reaction are longer than those using the multistep chemical reaction; the highest temperature and the highest velocity on the plume axis calculated using the former are greater than that using the latter. The important influence of chemical reaction mechanism must be considered in the study of the fixing structure of double nozzle engine on the rocket body.

Batch Simulation of Rare Earths Extractive Separation by Di (2-Ethylhexyl) Phosphoric Acid and Tributylphosphate in Kerosene

International Nuclear Information System (INIS)

Kraikaew, Jarunee; Srinuttakul, Wanee

2004-01-01

Liquid-liquid extraction is applied to separate individual rare earths. In this research, 6-stage continuous countercurrent solvent extraction was simulated to extract rare earths from rare earth nitrate solution, which was obtained from monazite processing, to estimate the possible optimum operating conditions for pilot or industrial plants. The solvent(S) per feed(F) ratio (S/F) was varied from 1 to 3. The organic are 1.0 and 1.5 Molars (M) Di (2-ethylhexyl) phosphoric acid (D2EHPA) in kerosene. 50% tributylphosphate (TBP) in kerosene was applied for comparison. It was found that D2EHPA was a good extracting agent for heavy rare earths while TBP extracted well both light and heavy rare earths. After extraction with TBP and D2EHPA, the extraction efficiency at solvent per feed ratio (S/F) =2 and 3 showed a slight difference. S/F =2 was selected commercially for operation

Una revisión del diseño y la arquitectura a través de los artefactos

Directory of Open Access Journals (Sweden)

Laura González Díez

2015-04-01

Full Text Available La obra de Deyan Sudjic, más que un diccionario al uso, es un análisis personal del mundo que nos rodea, en el que el autor narra con entusiasmo y subjetividad sus experiencias y pensamientos en torno al diseño, llegando a afirmar que “el diseño ayudará a crear mejores objetos y una sociedad más consciente”. El libro responde a una intención clara por parte de Sudjic de “hacer accesibles el diseño y la arquitectura más allá del gremio”, por ello trata de acercar al lector a objetos de uso cotidiano, que van desde una silla o un teclado a una cremallera, pasando por los coches que –según el autor– siempre han fascinado a los diseñadores y considera que “examinar de cerca un coche nos dice mucho sobre nuestra manera de vivir, sobre cómo hacemos las cosas y sobre nosotros mismos. No es arte, pero es el mayor logro del diseño, el artefacto que reúne más concentración de talento diseñador por centímetro cuadrado”.

Ligh oil-gas cracking on zeolite-containing catalysts

Energy Technology Data Exchange (ETDEWEB)

Koval' chuk, L V; Takhmarova, G M; Topchieva, K V

1977-01-01

A comparative study was made of the activity of cation-decationized forms of zeolite-containing catalysts in the cracking of the kerosene-gas oil fraction. The greatest benzene yield was obtained at 400/sup 0/. Temperatures greater than that lead to a more intense cracking and to changes in the redistributive ability of the catalysts. An increase in the polyvalent cations was shown to have little effect on the activity of the thermally processed zeolite-containing catalysts but did lead to a reduction in the activity of the thermally processed samples. 5 tables, 6 references.

Kerosene detection using laser induced fluorescence imaging for aeronautical engines application; Detection du kerozene par imagerie de fluorescence induite par laser, pour application sur foyer aeronautique

Energy Technology Data Exchange (ETDEWEB)

Baranger, Ph.

2004-10-15

The new concepts of aeronautical engines, developed to follow the evolution of the European standards of pollution, are generally based on an improvement of the processes of liquid fuel injection and mixture in the combustion chamber. There is currently no model mature enough to work without experimental validation. The purpose of this thesis is to assess the possibility of measuring the kerosene (Jet A1) vapour distribution by PLIF (Planar Laser Induced Fluorescence). That measurement technique must quantitatively image the instantaneous concentrations fields of the vaporized fuel in a spray. The implementation of such a technique needs an experimental spectroscopic study, which was realized on the vapour of fuel. First of all, this study allowed us to determine the properties of the kerosene fluorescence spectrum versus physical parameters such as temperature, pressure or gas mixture composition, especially in presence of oxygen molecules. Then, it was shown that the fluorescence spectrum of the fuel could be reproduce in all physical conditions by a single mixture of four aromatics. Their photophysical properties were also analyzed. Following this spectroscopic study, a phenomenological model for the fluorescence of the gaseous fuel was set up. This model led us to a protocol for an optical diagnostic on this fuel vapour. An experiment was set up to test the implementation and the limits of this technique in simple laboratory conditions. This experiment confirmed that this is indeed a promising technique for the diagnostic of the fuel vapour in aeronautical engine. (author)

An anodic alumina supported Ni-Pt bimetallic plate-type catalysts for multi-reforming of methane, kerosene and ethanol

KAUST Repository

Zhou, Lu; Guo, Yu; Kameyama, Hideo; Basset, Jean-Marie

2014-01-01

. The prepared Ni-Pt catalyst showed excellent performance during steam reforming of methane, kerosene and ethanol under both 3000 h stationary and 500-time daily start-up and shut-down operation modes. Self-activation ability of this catalyst was evidenced

Long-lived gas-phase radicals from combustion

Energy Technology Data Exchange (ETDEWEB)

Kaneko, Takashi; Furusawa, Koji; Amano, Toshiji; Okubo, Yoichi; Tsuchiya, Jun' ichi; Yoshizawa, Fujiroku; Akutsu, Yoshiaki; Tamura, Masamitsu; Yoshida, Tadao (Univ. of Tokyo (Japan))

1989-04-20

On indoor air pollution or fire, it is feared that the gas-phase radicals from the combustion of inflammables or fuel seriously exert an influence on the organisms as harmful matter. The gas-phase radicals were studied using the electron spin resonance (ESR) spin-trapping technique. For the spin trap solution, 0.1 mol solution of {alpha}-phenyl-N-t-butylnitron in benzene was used. As a result, apparently long-lived and highly reactive oxygen-centered radicals were detected in the smoke from polyethylene, polypropylene, polystyrene, polymethylmethacrylate, cellulose, kerosene, benzene, acetone, methanol and butylalcohol. It is suggested that the production mechanism for the radicals should be different from olefin-NOx-air system reaction, which is considered for the radicals from cigarette smoke. 11 refs., 6 figs., 2 tabs.

Development of reliable analytical method for extraction and separation of thorium(IV) by Cyanex 272 in kerosene

International Nuclear Information System (INIS)

Madane, N.S.; Mohite, B.S.

2011-01-01

A simple and selective spectrophotometric method has been developed for the extraction and separation of thorium(IV) from sodium salicylate media using Cyanex 272 in kerosene. Thorium(IV) was quantitatively extracted by 5 x 10 -4 M Cyanex 272 in kerosene from 1 x 10 -5 M sodium salicylate medium. The extracted thorium(IV) was stripped out quantitatively from the organic phase with 4.0 M hydrochloric acid and determined spectrophotometrically with arsenazo(III) at 620 nm. The effect of concentrations of sodium salicylate, extractant, diluents, metal ion and strippants has been studied. Separation of thorium(IV) from other elements was achieved from binary as well as multicomponent mixtures such as uranium(VI), strontium(II), rubidium(I), cesium(I), potassium(I), Sodium(I), lithium(I), lead(II), barium(II), beryllium(II) etc. Using this method separation and determination of thorium(IV) in geological and real samples has been carried out. The method is simple, rapid and selective with good reproducibility (approximately ±2%). (author)

Liquid-liquid extraction of chromium (VI) from sulfuric acid solutions using tri-n-dodecylamine/kerosene

International Nuclear Information System (INIS)

Stas, J.

2008-01-01

Extraction of chromium (VI) from sulfuric acid solutions with tri-n-dodecylamine containing octanol-1 as a modifier in kerosene was investigated. All parameters influencing the extraction of chromium (VI) (time of agitation, concentrations of chromium (VI), sulfuric acid, tri-n-dodecylamine and temperature) were studied. Forst of all, tri-n-dodecylamine reacts with sulfuric acid to form tri-n-dodecylamine sulfate and bisulfate salts, then, dichromate ions is extracted by amine bisulfate. The mathematical treatment of the obtained date enabled us to calculate the formation of equilibrium constant of (TDAH) 2 SO 4 TDAHHSO 4 and (TDAH) 2 Cγ 2 O 7 at 25 Centigrade and have been found to be K 1 =10 9.642 (14/mol 4 ), K 2 = 10 -0.899 (L/mol) and K ex 10 10.55 respectively. Stripping of more than 99% of chromium (VI) from the organic phase of tri-n-dodecylamine/kerosene can be easily achieved in two stages using 0.05 M sodium carbonate solution. The synergistic effect of tri-n-butylphosphate and tri-n-octylphosphine oxide on the extraction of chromium (VI) were also studied. (author)

Rural and Renewable Energy Project: Renewable and Alternative Energy Devices and Viable Alternatives to Fuelwood and Kerosene

International Nuclear Information System (INIS)

1997-12-01

The need for conservation of the nation's trees and other forestry resources so as to make the Government's reafforestation, soil erosion and desertification control programs successful, is a matter that requires serious attention. This is because the bulk of the people of this country, who are in the rural areas, depend massively on fuelwood as their source of energy for cooking. For a large percentage of the urban dwellers, the situation is not much different since the recent increases in the prices of kerosene and liquefied petroleum gas has forced many to opt for fuelwood for cooking. Viable renewable and alternative energy systems like solar cookers, biogas plants, improved wood burning stoves, briquetted biomass and smokeless coal briquettes and stoves are essential for the provision of alternative cooking fuels and methodologies. Furthermore, the inefficient open-to-sun drying method is prevalent, while the rural areas are particularly starved of petroleum products and grid electricity. Modern solar dryers, solar-PV, wind and hydropower can be used to meet some of the energy needs of the rural population. This paper discusses these renewable and alternative devices and how they can be integrated into the Nigerian rural energy system. (author)

Sustainable bio kerosene: Process routes and industrial demonstration activities in aviation biofuels

International Nuclear Information System (INIS)

Chiaramonti, David; Prussi, Matteo; Buffi, Marco; Tacconi, Daniela

2014-01-01

Highlights: • Routes to aviation biofuels are examined, focusing on drop-in biofuels, capable of high blend levels with fossil kerosene. • Industrial demonstration activities are reported. • Used cooking oil is considered as alternative sustainable biomass feedstock for paraffinic fuel production. - Abstract: Alternative fuels are expected to play a major role in EU in the coming years due European Directives on the promotion of renewable energies and reduction of greenhouse gas emissions in transports. However, while in road transports a variety of possible renewable fuels (mainly biofuels, but also electricity) can be considered, in aviation only high quality paraffinic biofuels can be adopted. This means that biomass must be converted through advanced processes into pure hydrocarbon fuels, fully compatible with the existing systems. The aviation sector is responsible for the 2% of the world anthropogenic CO 2 emissions and the 10% of the fuel consumption: airlines’ costs for fuel reach 30% of operating costs. In addition, the aviation traffic is expected to double within 15 years from 2012, while fuel consumption and CO 2 emissions should double in 25 years. Thus, more than 2 billion people and 40 Mt of good/cargo will have to be moved every year. In this context, the EU Flightpath set a target of 2 Mt per year for aviation alternative fuel by 2020 (i.e. 4% of annual fuel consumption). New processes towards bio-hydrocarbons are being developed, demonstrated and soon industrialized. The present work explores the possible routes from biomass feedstock to sustainable paraffinic fuels, either through bio or thermo-chemical processes, as well as discusses those more mature, focusing on industrial demonstration initiatives. In fact, while the number of possible options towards paraffinic biofuel production is very large, and covers both thermochemical and biochemical routes, as well as hybrid one, only two pathways are today ready for testing a significant

Studies on avoiding second organic phase in DHDECMP-TBP/kerosene with the extraction of HNO3-Gd

International Nuclear Information System (INIS)

Huang Zilin; Zhao Hugen; Hu Jingxin

1998-01-01

The bidentate extractant of DHDECMP (CMP) may by more practical in the treatment of high-level liquid waste (HLLW) if it could be diluted by kerosene. Bu it is difficult to avoid the formation of second organic phase in CMP/kerosene with the extraction of HNO 3 and RE. It is advantageous to avoid the formation of second organic phase after the extraction of HNO 3 and Gd by adding TBP. The formation conditions of second organic phase are studied and the loaded capacity of RE-HNO 3 is measured. The results are as follows. Raising temperature has a slight advantage to avoid formation of second organic phase. The addition of TBP is beneficial to avoid second organic phase. An organic system of 0.60 mol/L CMP-1.20 mol/L TBP/kerosene contacting with an aqueous solution containing 6.0 mol/L HNO 3 does not appear second organic phase. The extraction of RE leads to form second organic phase which does not occur when it only extracts HNO 3 . It is able to avoid second organic phase with a low concentration of CMP. The higher concentration of CMP, the higher loaded capacity of Gd 3+ and HNO 3 . It is advantageous to avoid second organic phase formation and also to get a higher loaded capacity of Gd 3+ and HNO 3 with increasing concentration of TBP. The loaded capacity of Gd decreases with an increasing initial concentration of HNO 3 in aqueous phase because of an increasing concentration of HNO 3 in the organic phase. The loaded capacity of Gd increases with raising temperature. To treat HLLW, the organic system containing 0.60 mol/L CMP and 1.40 mol/L TBP is recommended

Burns and fires in South Africa's informal settlements: Have approved kerosene stoves improved safety?

Science.gov (United States)

Kimemia, David; van Niekerk, Ashley; Govender, Rajen; Seedat, Mohamed

2018-06-01

This study is a follow-on to an intervention project that implemented South African Bureau of Standards approved kerosene stoves and safety education in 150 households of a Johannesburg informal settlement. An investigation conducted 12 months later established that 43 stoves had operational defects, yet 23 households continued using the faulty appliances. This study focuses on (1) the psychological and behavioural factors associated with continued use of faulty stoves by the 23 households, and (2), the specific technical failures of these stoves. The study involved one-on-one recall interviews with the households using defective stoves (N=21) and laboratory-based stove tests for seven of the affected appliances. The results indicate that the stoves had defects in critical safety features such as flame control and the self-extinguishing mechanism. Four stove malfunctions of minor burn affect were reported in the study. Continued use of the damaged stoves was significantly associated with the time from receipt of the stove to detection of first failure: stoves that failed later on were more significantly likely to remain in use as compared to those that failed sooner. The findings point to the need for strengthening enforcement of appliance standards, public education on kerosene stove use, and structural change for the energy-poor. Copyright © 2017 Elsevier Ltd and ISBI. All rights reserved.

Jet Fuel Kerosene is not Immunosuppressive in Mice or Rats Following Inhalation for 28 Days

OpenAIRE

White, Kimber L.; DeLorme, Michael P.; Beatty, Patrick W.; Smith, Matthew J.; Peachee, Vanessa L.

2013-01-01

Previous reports indicated that inhalation of JP-8 aviation turbine fuel is immunosuppressive. However, in some of those studies, the exposure concentrations were underestimated, and percent of test article as vapor or aerosol was not determined. Furthermore, it is unknown whether the observed effects are attributable to the base hydrocarbon fuel (jet fuel kerosene) or to the various fuel additives in jet fuels. The present studies were conducted, in compliance with Good Laboratory Practice (...

Investigations on the self-excited oscillations in a kerosene spray flame

Energy Technology Data Exchange (ETDEWEB)

de la Cruz Garcia, M.; Mastorakos, E.; Dowling, A.P. [Engineering Department, Cambridge University, Trumpington Street, CB2 1PZ, Cambridge (United Kingdom)

2009-02-15

A laboratory scale gas turbine type burner at atmospheric pressure and with air preheat was operated with aviation kerosene Jet-A1 injected from a pressure atomiser. Self-excited oscillations were observed and analysed to understand better the relationship between the spray and thermo-acoustic oscillations. The fluctuations of CH{sup *} chemiluminescence measured simultaneously with the pressure were used to determine the flame transfer function. The Mie scattering technique was used to record spray fluctuations in reacting conditions with a high speed camera. Integrating the Mie intensity over the imaged region gave a temporal signal acquired simultaneously with pressure fluctuations and the transfer function between the light scattered from the spray and the velocity fluctuations in the plenum was evaluated. Phase Doppler anemometry was used for axial velocity and drop size measurements at different positions downstream the injection plane and for various operating conditions. Pressure spectra showed peaks at a frequency that changed with air mass flow rate. The peak for low air mass flow rate operation was at 220 Hz and was associated with a resonance of the supply plenum. At the same global equivalence ratio but at high air mass flow rates, the pressure spectrum peak was at 323 Hz, a combustion chamber resonant frequency. At low air flow rates, the spray fluctuation motion was pronounced and followed the frequency of the pressure oscillation. At high air flow rates, more effective evaporation resulted in a complete disappearance of droplets at an axial distance of about 1/3 burner diameters from the injection plane, leading to a different flame transfer function and frequency of the self-excited oscillation. The results highlight the sensitivity of the self-excited oscillation to the degree of mixing achieved before the main recirculation zone. (author)

Large eddy simulation of combustion characteristics in a kerosene fueled rocket-based combined-cycle engine combustor

Science.gov (United States)

Huang, Zhi-wei; He, Guo-qiang; Qin, Fei; Cao, Dong-gang; Wei, Xiang-geng; Shi, Lei

2016-10-01

This study reports combustion characteristics of a rocket-based combined-cycle engine combustor operating at ramjet mode numerically. Compressible large eddy simulation with liquid kerosene sprayed and vaporized is used to study the intrinsic unsteadiness of combustion in such a propulsion system. Results for the pressure oscillation amplitude and frequency in the combustor as well as the wall pressure distribution along the flow-path, are validated using experimental data, and they show acceptable agreement. Coupled with reduced chemical kinetics of kerosene, results are compared with the simultaneously obtained Reynolds-Averaged Navier-Stokes results, and show significant differences. A flow field analysis is also carried out for further study of the turbulent flame structures. Mixture fraction is used to determine the most probable flame location in the combustor at stoichiometric condition. Spatial distributions of the Takeno flame index, scalar dissipation rate, and heat release rate reveal that different combustion modes, such as premixed and non-premixed modes, coexisted at different sections of the combustor. The RBCC combustor is divided into different regions characterized by their non-uniform features. Flame stabilization mechanism, i.e., flame propagation or fuel auto-ignition, and their relative importance, is also determined at different regions in the combustor.

Investigations of foam formation and its stabilization in the extraction systems: TBP in kerosene-nitric acid solutions

International Nuclear Information System (INIS)

Zielinski, A.

1980-01-01

The paper is devoted to studies of foam formation and its stabilization in TBP - kerosene - nitric acid solutions extracting systems. It was experimentally found, that TBP acts as a stabilizator of thin, liquid foam films as well as an emulgator in forming dispersions. The stabilizing effect of fine emulsions w/o on formed foams column was observed. Relevant references on the subject are also reviewed. (author)

Development of low level radioactive waste incineration plant

International Nuclear Information System (INIS)

Shaharum bin Ramli; Azmir bin Hanafiah

1994-01-01

A laboratory scale liquid waste incineration plant has been constructed. Preliminary tests were conducted by burning kerosene as the waste. The temperature reached 1200 deg.C. The exhaust gas was analysed for CO and CO sub 2 content. The hydrocarbon content was not measured without the proper analyser. Thus, parameters such as the optimum air:kerosene ratio and the maximum kerosene injection rate could not be determined. Complete tests will be carried out with the newly received hydrocarbon, NO sub x, CO, CO sub 2 and O sub 2 gas analyser

Evaluation of column flotation results with a film flotation method; Film fusenho wo mochiita column fusen kekkan no hyoka

Energy Technology Data Exchange (ETDEWEB)

Fujimoto, H.; Matsukata, M.; Ueyama, K. [Osaka University, Osaka (Japan). Faculty of Engineering Science

1996-10-28

Change in wettability of coal particle surfaces due to kerosene adsorption was studied by using a film flotation method. The applicability of a film flotation method to coals modified by kerosene adsorption was first confirmed. In experiment, film flotation was applied to Illinois coal modified by aqueous methanol solution and kerosene adsorption, and the weight percent of residual particles on a gas-liquid interface and kerosene in aqueous methanol solution were analyzed to verify the applicability of a film flotation method. Film flotation was applied to Datong and Illinois coals modified by kerosene adsorption, and the weight percent of residual particles on a gas-liquid interface was plotted to surface tension of liquid. As a result, the weight percent of hydrophobic particles within 50mN/m in surface tension slightly increased in Datong coal and remarkably increased in Illinois coal with kerosene addition. It was thus suggested that in addition to surface tension, the distributions of hydrophilic and hydrophobic strengths on the surface of each coal particle should be considered to understand attachment of coal particles and bubbles. 6 refs., 4 figs.

Reconocimiento y economía de la estima: La normatividad basal de los artefactos semánticos

Directory of Open Access Journals (Sweden)

Gonzalo Bustamante Kuschel

2012-01-01

Full Text Available En la estructuras de la gramática moral social, el Reconocimiento [Anerkennung] juega un papel primordial tanto en la propia percepción como sujetos de dignidad de cada sistema psíquico así como en la de los otros como sujetos merecedores de un trato digno. Brennan y Pettit han rescatado el valor de la Economía de la Estima. En ella se destaca que la estructura desiderativa del sujeto implica no sólo el querer poseer bienes materiales y el aspirar al poder sino que además el buscar estima, es así como no habría sólo una economía de la maximización de la utilidad de bienes o reputación por medio, por ejemplo, de 'material goods' y 'positional goods' sino que además una de la búsqueda de estima. Las personas, como artefactos semánticos, competiríamos y establecemos mecanismos de distribución de la estima. Su posesión o no, implicaría mayores grados de inclusión o exclusión social desde una perspectiva comunicacional. El acceso igualitario a competir por ella, sería un derecho fundamental. El presente artículo explora hasta dónde esta entrada en igualdad para competir por la Estima no se encuentra condicionada por el Reconocimiento, el cual como Pettit y Brennan abordan, es distinto a la Estima pero como gramática basal de la normatividad social se constituiría en elemento condicionante para una competencia equitativa y democrática por Estima.

Scrutinizing the combustion, performance and emissions of safflower biodiesel–kerosene fueled diesel engine used as power source for a generator

International Nuclear Information System (INIS)

Aydın, Hüseyin

2016-01-01

Highlights: • Effects of kerosene addition to biodiesel in a diesel engine were investigated. • S90&K10, S75&K25 and S50&K50 were tested and comparisons have been made with D2. • Patterns of combustion parameters have found be quite similar for blend fuels and D2. • The highest efficiency value is obtained for S50&K50 blend. • HC emissions a bit increased and NOx emissions were decreased. - Abstract: When neat biodiesel or its blends with diesel fuel that contain high amounts of biodiesel are used in diesel engines some operational problems such as poor injection, bad atomization and incomplete combustion occur mainly due to higher viscosity and surface tension. Engine problems with the use of biodiesel–fuel blends that contain higher percentages of biodiesel need to be solved in order to utilize the advantages of biodiesel in environmental and economical ways. The mentioned problems can also be solved by blending biodiesel with another low density or viscosity fuel such as kerosene. In present study biodiesel was produced from safflower oil. S90&K10, S75&K25 and S50&K50 were prepared by blending biodiesel with kerosene. A 4 cylinder diesel engine that was used to drive an electric generator was used to deeply investigate the similarity of combustion, performance and emission characteristics of the blend fuels to D2. All experiments were carried out at constant loads of 3.6, 7.2 and 10.8 kW generated powers. Patterns of combustion parameters found to be quite similar for blends and D2 fuel. NO_x emissions were considerably decreased with percentages of 68.2%, 56.9% and 55.1% for S50&K50, S75&K25 and S90&K10, respectively while unburned HC emissions were a bit increased. Mass fuel consumption and BSFC were slightly increased for S75&K25 and S90&K10, but they were decreased with an average increase in BTE by 3.84% for S50&K50 fuel when compared to D2. Eventually, it was concluded that high percentages of safflower oil biodiesel can be a potential

Numerical investigation on the combined effects of varying piston bowl geometries and ramp injection rate-shapes on the combustion characteristics of a kerosene-diesel fueled direct injection compression ignition engine

International Nuclear Information System (INIS)

Tay, Kun Lin; Yang, Wenming; Zhao, Feiyang; Yu, Wenbin; Mohan, Balaji

2017-01-01

Highlights: • Effect of injection rate-shaping on heat-release is significant with less turbulence. • Two peak heat-releases are seen for the shallow-depth re-entrant piston. • Significant combustion phasing occurs with kerosene usage and high turbulence. - Abstract: In this work, the combustion characteristics of a direct injection compression ignition (DICI) engine fueled with kerosene-diesel blends, using different piston bowl geometries together with varying injection rate-shapes were investigated. A total of three combustion bowl geometries, namely the omega combustion chamber (OCC), the shallow-depth combustion chamber (SCC) and the shallow-depth re-entrant combustion chamber (SRCC), were used together with six different ramp injection rate-shapes and pure diesel, kerosene-diesel and pure kerosene fuels. It is seen that the SRCC geometry, which has the shortest throat length, gives the highest turbulence kinetic energy (TKE) and this resulted in two peak heat-releases, with a primary peak heat-release during the premixed combustion phase and a secondary peak heat-release during the mixing-controlled combustion phase. In addition, the SCC geometry gives rather distinct premixed combustion and mixing-controlled combustion phases due to the fact that combustion is predominantly controlled by the injected fuel spray itself because of less turbulence. Also, when kerosene is used in place of diesel, the heat-release during the premixed combustion phase increases and diminishes during the mixing-controlled and late combustion phases. It is interesting to note that the effect of injection rate-shaping on the heat-release rate is more obvious for bowl geometries that generate less TKE. Moreover, bowl geometries that generate higher TKEs as well as fuels with lower viscosities generally give lower carbon monoxide (CO) emissions and higher nitrogen oxide (NO) emissions. More importantly, it is possible to achieve low NO and CO emissions simultaneously by using the

Kerosene-water separation in T-junction with orientation upward branch with a 60° angle: Variation of diameter ratio

Science.gov (United States)

Puspitasari, Dewi; Indarto, Purnomo, Khasani

2016-06-01

Research on the T-junction is still underway for the flow of liquid-liquid (kerosene-water). Some research on the characteristics of kerosene-water separation was performed using T-junction oriented upward branch with a 60° angle. To observe the effect of diameters ratio on the phase separation that produced T-junction then made a test section with a horizontal pipe diameter 36 mm, while the side arm 36 mm diameter, 26 mm and 19 mm (diameters ratio of 1, 0.7 and 0.5) by using plexiglass pipe type. Based on experimental results and visualization of data flow in the test section, to the value obtained 60% water cut, the maximum separation efficiency of 94%, FK = 0.94 and FW = 0.001 with a diameter ratio of 1. For other diameter ratio of 0.7 and 0.5 respectively separation efficiency of 66%, FK = 1 and Fw = 0.34 for 0.7 and separation efficiency of 84%, FK = 1 and Fw = 0.16 for 0.5, the best value is obtained at a water cut 60% too. All the best conditions to achieve the above-stratified flow pattern.

Purification of Gold from Chloride Leach Liquor of Copper Anode Slime by Octanol-Kerosene Organic Extractant

OpenAIRE

N. Sadeghi; E. Keshavarz Alamdari

2015-01-01

In the present study, the copper anode slime was leached in chloride media. Then, pregnant leach solution (PLS) was purified using solvent extraction method and Octanol-kerosene solution. HAuCl4.2L was determined as the extracted macromolecule, and separation of impurities, such as copper, iron and selenium was done in the presence of gold. McCabe-Thiele diagram of Au–HCl (3 M)– Octanol (40% v/v) in O/A=3/4 showed that Au concentration in aqueous phase decreased from the initial value of 200 ...

ANÁLISIS FUNCIONALES EN ARTEFACTOS LÍTICOS DE GRUPOS CAZADORES-RECOLECTORES EN REGIONES TROPICALES DURANTE LA TRANSICIÓN PLEISTOCENO FINAL-HOLOCENO TEMPRANO: EL ABRIGO SANTA MARTA, CHIAPAS, MÉXICO (Functional Analysis of Lithic Artifacts of Hunter-Gatherer Groups in Tropical Regions During the Late Pleistocene-Early Holocene Transition: Santa Marta's Shelter, Chiapas, Mexico

Directory of Open Access Journals (Sweden)

Patricia Pérez Martínez

2018-03-01

Full Text Available Los análisis funcionales vieron la luz en la década de los sesenta con la publicación de la Tecnología Prehistórica de Semenov (1964, desde entonces se ha realizado un gran número de investigaciones para dilucidar actividades de subsistencia a partir de la funcionalidad de los artefactos. Desafortunadamente, en México pocos han sido los trabajos enfocados a este tipo de análisis (Elizalde y Mandujano 2000; Lewenstein 1990; Mirambell 1964. En el presente estudio se analizaron microscópicamente 36 artefactos líticos con el objetivo de caracterizar los micropulidos e inferir la funcionalidad de estos conjuntos asociados a grupos cazadores-recolectores procedentes de contextos de la transición Pleistoceno-Holoceno (13130-12671 cal. AP. ENGLISH: Use-wear studies began in the 1960s with Semenov’s publication entitled Prehistoric Technology (1964. Since then, a great number of investigations have been carried out to elucidate subsistence activities based on the functionality of the artifacts. Unfortunately, in Mexico few studies have focused on this type of analysis (Elizalde & Mandujano 2000; Lewenstein 1990; Mirambell 1964. In the present study, 36 lithic artifacts associated with hunter-gatherer groups from Pleistocene-Holocene transition contexts (13130–12671 cal. AP were analyzed microscopically with the aim of characterizing micropolishes and inferring functionality.

Studies on the hydrodynamic properties of the sieve plate pulsed column for 30% TRPO-kerosene/nitric acid system

International Nuclear Information System (INIS)

Ma Ronglin; Chen Jing; Xu Shiping; Wu Qiulin; Tai Derong; Song Chongli

2000-01-01

The hydrodynamic properties of the sieve plate pulsed column for 30% TRPO-kerosene/nitric acid system is studied. With the organic phase or aqueous phase as the continuous one, the dispersed phase behaves mainly as coalescing or dispersing, respectively. The sieve plate pulsed column has a fairish flooding throughput for this system. Under the same pulsation intensity, the flooding throughput for the organic phase as the continuous one is more than that for the aqueous phase as the continuous one

Technology for emission control in internal combustion engines; Kakushu nainen kikan ni okeru hai gas joka gijutsu

Energy Technology Data Exchange (ETDEWEB)

Shioji, M. [Kyoto University, Kyoto (Japan)

1998-09-01

Described herein are emission control technology and exhaust gas cleaning measures for internal combustion engines. Gas turbines burn relatively high-quality fuels, such as natural gas, kerosene, diesel oil and gas oil, where the major concerns are to reduce NOx and dust emissions. The NOx abatement techniques fall into two general categories; wet processes which inject water or steam, and dry processes which depend on improved combustion. Power generation and cogeneration which burn natural gas adopt lean, premixed combustion and two-stage combustion as the major approaches. Low-speed, large-size diesel engines, which realize very high thermal efficiency, discharge high concentrations of NOx. Delayed fuel injection timing is the most easy NOx abatement technique to meet the related regulations, but is accompanied by decreased fuel economy. Use of water-emulsified fuel, water layer injection and multi-port injection can reduce NOx emissions without decreasing fuel economy, depending on optimization methods adopted. Automobile gasoline engines are required to further clean exhaust gases by catalystic systems. 9 refs., 10 figs., 6 tabs.

Energy poverty reduction by fuel switching. Impact evaluation of the LPG conversion program in Indonesia

NARCIS (Netherlands)

Andadari, R.K.; Mulder, P.; Rietveld, P.

2014-01-01

In low- and middle-income countries, Liquefied Petroleum Gas (LPG) can be an attractive alternative to the widespread use of traditional kerosene. Not only is LPG a relatively clean, safe and cost-effective fuel for households, its large-scale adoption also reduces the heavy burden of kerosene

Greenhouse gas mitigation potential of biomass energy technologies in Vietnam using the long range energy alternative planning system model

International Nuclear Information System (INIS)

Kumar, Amit; Bhattacharya, S.C.; Pham, H.L.

2003-01-01

The greenhouse gas (GHG) mitigation potentials of number of selected Biomass Energy Technologies (BETs) have been assessed in Vietnam. These include Biomass Integrated Gasification Combined Cycle (BIGCC) based on wood and bagasse, direct combustion plants based on wood, co-firing power plants and Stirling engine based on wood and cooking stoves. Using the Long-range Energy Alternative Planning (LEAP) model, different scenarios were considered, namely the base case with no mitigation options, replacement of kerosene and liquefied petroleum gas (LPG) by biogas stove, substitution of gasoline by ethanol in transport sector, replacement of coal by wood as fuel in industrial boilers, electricity generation with biomass energy technologies and an integrated scenario including all the options together. Substitution of coal stoves by biogas stove has positive abatement cost, as the cost of wood in Vietnam is higher than coal. Replacement of kerosene and LPG cookstoves by biomass stove also has a positive abatement cost. Replacement of gasoline by ethanol can be realized after a few years, as at present the cost of ethanol is more than the cost of gasoline. The replacement of coal by biomass in industrial boiler is also not an attractive option as wood is more expensive than coal in Vietnam. The substitution of fossil fuel fired plants by packages of BETs has a negative abatement cost. This option, if implemented, would result in mitigation of 10.83 million tonnes (Mt) of CO 2 in 2010

Study on distributions and recoveries of tetrachlorodibenzo-p-dioxin and octachlorodibenzo-p-dioxin in a mm5 sampling train

International Nuclear Information System (INIS)

Finkel, J.M.; James, R.H.; Baughman, K.W.

1990-12-01

14 C-dioxin tracers were used to evaluate whole MM5 sampling train recoveries of dioxin and to determine the distribution of dioxins spiked into a sampling train that was concurrently sampling emissions from a burn of either natural gas ('clean' burn) or kerosene ('dirty' burn). The spike tests were made with a pilot-scale furnace constructed and operated in the laboratory. Recovery of 14 C-dioxin from the MM5 sampling train was determined by scintillation spectrometry. The experimental results indicate that the amount of spiked TCDD- 14 C recovered was approximately 85% during a natural gas test and 83% during a kerosene test. The amount of spiked OCDD- 14 C recovered was approximately 88% during a kerosene test. Also, the data indicate that during the kerosene tests OCDD- 14 C is collected primarily in the front half of the sampling train but TCDD- 14 C is often found in the XAD and the rear filter bell, riser and condenser of the sampling train. During the natural gas tests, TCDD- 14 C was primarily in the XAD. The distribution of the TCDD- 14 C in the kerosene tests was dependent on the rigid operation of the sampling train. The information from the study will be used to determine procedural areas that need improvements or modifications to allow the efficient collection and accurate determination of trace levels of dioxins and furans using the MM5 Method

Sadhana | Indian Academy of Sciences

Indian Academy of Sciences (India)

Gas turbines have wide application as prime movers in transportation and power generating sectors,most of which are driven by fossil fuels like kerosene. The conventional fuels are associated with problems of air pollution, and the fuel reserves are getting depleted gradually. Addition of ethanol in kerosene leads to better ...

Airbreathing Propulsion Fuels and Energy Exploratory Research and Development (APFEERD) Sub Task: Review of Bulk Physical Properties of Synthesized Hydrocarbon:Kerosenes and Blends

Science.gov (United States)

2017-06-01

Fuels and Energy Branch Turbine Engine Division Turbine Engine Division CHARLES W. STEVENS, Lead Engineer Turbine Engine Division Aerospace Systems...evaluation concludes, based on fundamental physical chemistry , that all hydrocarbon kerosenes that meet the minimum density requirement will have bulk...alternative jet fuels; renewable jet fuel; fuel physical properties; fuel chemistry ; fuel properties 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF

Radiological safety assessment of gas mantle industries in India

International Nuclear Information System (INIS)

Sadagopan, G.; Venkataraman, G.

1994-01-01

Thorium, a radioactive element of actinide family was discovered by Berzelius in 1828 and named by him in honor of the Scandinavian God open-quote Thor close-quote. Following its discovery the earliest known use of thorium was in the making of gas mantles. The other use as an X-ray contrast medium open-quote Thorotrast close-quote has since long been discontinued, where as even today its use in gas mantles is continued. Gas lights have been used as a source of light since 1800's. In India, although electric bulbs have replaced most of the gas lights, even today in villages and in urban areas where there is no continuous power supply and in outdoor lightings gas lamps are used. The mantle which is used in these lamps is called the Welsbach mantle and is a netted hose that is impregnated with thorium nitrate and other metals. The function of a gas mantle is to produce a bright light during operation of the lighting device (gas or kerosene lamp) in which the mantle is placed. When placed in a lighting device and heated to 1300-1800 degree Celcius thorium in the mantle incandesces and gives off bright light. In India presently there are about 70 manufacturing units handling 150 metric tons of thorium nitrate annually. There are about four hundred persons involved in manufacturing 200 million mantles per year. Thorium is chosen because of its property of incadescence, however since it is radioactive, radiation safety of the workplace, handling personnel and safe environmental condition for members of public have to be maintained

POLA PENGELUARAN, PERSEPSI, DAN KEPUASAN KELUARGA TERHADAP PERUBAHAN PENGGUNAAN ENERGI DARI MINYAK TANAH KE LPG

Directory of Open Access Journals (Sweden)

Megawati Simanjuntak

2009-08-01

Full Text Available The objectives of this research were to analyze the expenses pattern, perception, and satisfaction level of families among fuel conversion. This research was conducted in two villages, namely Cikarawang Village and Situ Gede Village, District of Bogor on October 2008. Total sample were 30 households consisted of fifteen samples in each village that chosen purposively. The average of expenses of families per month for buying fuel, after the fuel conversion program had been conducted tend to decreased from IDR 96.500,00 per month to IDR 58.800,00 per month after the program or saved the family expenses for IDR 37.700,00 per month. Most of respondents stated agreed that conversion program could decreased the family expenses. The gas gave more advantage compared to kerosene, accepted gas as replacement of kerosene, and there was no force in conducting the conversion program. The satisfaction level showed that, respondents felt saver using kerosene and viewed from the cost to buy fuel, few respondents felt heavy for the gas price. Otherwise, the using of LPG was felt more efisien in time, cleaner, and more practice than kerosene.

Extraction and separation of Am and rare earth elements in HNO3 solution with P507-sulphonating kerosene

International Nuclear Information System (INIS)

Li Zhenhu; Jiao Rongzhou; Zhu Yongjun

1994-01-01

A study has been made of the extraction equilibrium of Am(III) and rare earth elements (III) in HNO 3 solution with P507-sulphonating kerosene. It has been found that this equilibrium depends on saponification ratio of P507, feed acidity, metal concentration as well as phase ratio. The extraction ability in order is La< Ce< Am< Pr< Nd< Sm. The model of distribution ratio has been founded. The agreement for calculated and experimental values of distribution ratio is fairly good. These values can be used to design the extraction and separation process of Am and rare earth elements

ARTEFACTOS DIALÓGICOS: UNA PROPUESTA PARA INTEGRAR LA EDUCACIÓN DE ARTES MUSICALES Y VISUALES (DIALOGIC ARTIFACTS: A PROPOSAL TO INTEGRATE THE EDUCATION OF MUSICAL AND VISUAL ARTS

Directory of Open Access Journals (Sweden)

Arenas Navarrete Mario

2011-08-01

Full Text Available Resumen:El propósito de este ensayo es realizar una propuesta para crear unidades de integración de artes musicales y visuales a través de la participación de estudiantes desde 12 a 17 años de edad, aproximadamente, en la creación de “Artefactos Dialógicos”, es decir, esculturas sonoras cinéticas e interactivas. La particularidad de estas instalaciones-esculturas es que establecen y explicitan diversos tipos de diálogos con la naturaleza. Corresponden a la cristalización de un proceso iniciado el año 1986 en el Departamento de Música de la Universidad de La Serena, Chile, caracterizado por la defensa de la transversalidad disciplinar, en oposición al especialismo. Han participado estudiantes universitarios y niños de su Escuela Experimental de Música; profesores, artistas visuales, compositores e investigadores. La pretensión de que estudiantes construyan estos artefactos, conlleva cumplir como requisito, su empoderamiento, el desarrollo de su capacidad de agencia y creatividad, para que, en colaboración con profesores de diferentes asignaturas artísticas, científicas y humanísticas, incluyan en la mirada estética, la configuración material y estructural de estos aparatos, integrando, así, racionalismo y expresividad. Todo ello, visualizado a través del filtro epistémico que otorga la educación intercultural, de tal modo de atrapar y proyectar ancestros, gestos, modos, iconografías,2 idiolectos,3 identidades y patrimonio.Abstract: In this essay, we propose to create units of integration of the musical and visual arts through the participation of students ranging approximately from 12 to 17 years of age, for the creation of the "Dialogical Artifacts", i.e., kinetic and interactive sound sculptures. The particularity of these artifacts lies on the fact that they establish and explicit different types of dialogues with nature from a transversal perspective of the curriculum. This initiative was taken for the first

Simulation of technetium extraction behavior in UO2 (NO3)2-TcO4--HNO3-H2O/TBP-kerosene system

International Nuclear Information System (INIS)

Zhang Chunlong; He Hui; Chen Yanxin; Tang Hongbin

2012-01-01

By comparing and analyzing lots of reported data of technetium with the computing results, a modification function P(c 0 (U), t) was introduced to the existing distribution coefficient model of technetium, and a new mathematical model for simulating technetium extraction behavior in the system of UO 2 (NO 3 ) 2 -TcO 4 -HNO 3 -H 2 O/TBP- kerosene was established, as well as a computer program. The reliability of the program was verified by 179 sets of distribution coefficient data, and the results were found to agree well with experimental data. By comparing the reported data of technetium with the computing results, an evaluation was made to test the performance of the revised model. It turned out that the calculation results of the new model were more reliable than that of the one reported previously. The revised model and program can be the foundation to simulating technetium extraction behavior in the system of UO 2 (NO 3 ) 2 - TcO 4 - -HNO 3 -H 2 O/TBP-kerosene with the temperature scope from 10 to 60℃, U concentration from 0 to 280 g/L, and nitric acid concentration from 0.1 to 5 mol/L. (authors)

Liquid-Liquid extraction of sulfuric acid using tri-n-dodecylamine/kerosene

International Nuclear Information System (INIS)

Stas, J.

2009-01-01

The extraction of sulfuric acid has been investigated by trin- dodecylamine (over line TDA) in kerosene in the presence of octanol- 1 as modifier. The effect of octanol-1 has been studied on the equilibrium constant of (TDAH) 2 SO 4 and TDAHHSO 4 formation in the concentration range from 5 to 25% v/v and within the temperature range from 25 to 50 centigrade degree. The equilibrium constants (K 1 and K 2 , at 25 centigrade degree), the enthalpy (ΔH 0 1 , ΔH 0 2 ) and the entropy (ΔS 0 1 , ΔS 0 2 ) changes were calculated for two extraction reactions of sulfuric acid by tri-n-dodecylamine containing 10% octanol-1 and they were found to be 10 9 .642 l 4 /mol 4 , 10 - 0.899 l/mol, -99.11, -22.17 kJ/mol, -0.149, -0.063 kJ/mol.K, respectively. The two reactions are: 2/overline TDA +2 H + +SO 4 2 -/rightleftarrows K 1 /overline (TDAH) 2 SO 4 and /overline (TDHA) 2 SO 4 H + +HSO 4 - /rightleftarrows K 2 2/overline TDAHHSO 4 . (author)

Purification of Gold from Chloride Leach Liquor of Copper Anode Slime by Octanol-Kerosene Organic Extractant

Directory of Open Access Journals (Sweden)

N. Sadeghi

2015-07-01

Full Text Available In the present study, the copper anode slime was leached in chloride media. Then, pregnant leach solution (PLS was purified using solvent extraction method and Octanol-kerosene solution. HAuCl4.2L was determined as the extracted macromolecule, and separation of impurities, such as copper, iron and selenium was done in the presence of gold. McCabe-Thiele diagram of Au–HCl (3 M– Octanol (40% v/v in O/A=3/4 showed that Au concentration in aqueous phase decreased from the initial value of 200 to 7 mg/L, after 5 stages. Ammonia solution was proposed as the stripper and McCabe-Thiele diagram was presented to obtain the number of gold stripping steps by ammonia solution

Household energy demand in Kenya: An application of the linear approximate almost ideal demand system (LA-AIDS)

International Nuclear Information System (INIS)

Ngui, Dianah; Mutua, John; Osiolo, Hellen; Aligula, Eric

2011-01-01

This paper estimates price and fuel expenditure elasticities of demand by applying the linear Approximate Almost Ideal Demand system (LA-AIDS) to 3665 households sampled across Kenya in 2009. The results indicate that motor spirit premium (MSP), automotive gas oil (AGO) and lubricants are price elastic while fuel wood, kerosene, charcoal, liquefied petroleum gas (LPG) and electricity are price inelastic. Kerosene is income elastic while fuel wood, charcoal, LPG, electricity, MSP and AGO are income inelastic. The results also reveal fuel stack behaviour, that is, multiple fuel use among the households. Main policy implications of the results include increasing the penetration of alternative fuels as well as provision of more fiscal incentives to increase usage of cleaner fuels. This not withstanding however, the household income should be increased beyond a certain point for the household to completely shift and use a new fuel. - Highlights: → Fuel wood, kerosene, charcoal, LPG and electricity are price inelastic. → Kerosene is income elastic. → Fuel wood, charcoal, electricity, LPG, MSP and AGO are income inelastic. → Results reveal fuel stack behaviour among the households. → Income should be increased beyond a certain point to facilitate fuel switch.

Household energy demand in Kenya: An application of the linear approximate almost ideal demand system (LA-AIDS)

Energy Technology Data Exchange (ETDEWEB)

Ngui, Dianah, E-mail: ngui.diana@ku.ac.ke [Kenyatta University, P.O. Box 43844-00100, Nairobi (Kenya); Kenya Institute for Public Policy Research and Analysis, P.O. Box, 56445-00200, Nairobi (Kenya); Mutua, John [Energy Regulatory Commission, P.O. Box 42681-00100, Nairobi (Kenya); Osiolo, Hellen; Aligula, Eric [Kenya Institute for Public Policy Research and Analysis, P.O. Box, 56445-00200, Nairobi (Kenya)

2011-11-15

This paper estimates price and fuel expenditure elasticities of demand by applying the linear Approximate Almost Ideal Demand system (LA-AIDS) to 3665 households sampled across Kenya in 2009. The results indicate that motor spirit premium (MSP), automotive gas oil (AGO) and lubricants are price elastic while fuel wood, kerosene, charcoal, liquefied petroleum gas (LPG) and electricity are price inelastic. Kerosene is income elastic while fuel wood, charcoal, LPG, electricity, MSP and AGO are income inelastic. The results also reveal fuel stack behaviour, that is, multiple fuel use among the households. Main policy implications of the results include increasing the penetration of alternative fuels as well as provision of more fiscal incentives to increase usage of cleaner fuels. This not withstanding however, the household income should be increased beyond a certain point for the household to completely shift and use a new fuel. - Highlights: > Fuel wood, kerosene, charcoal, LPG and electricity are price inelastic. > Kerosene is income elastic. > Fuel wood, charcoal, electricity, LPG, MSP and AGO are income inelastic. > Results reveal fuel stack behaviour among the households. > Income should be increased beyond a certain point to facilitate fuel switch.

Introducing Students to Gas Chromatography-Mass Spectrometry Analysis and Determination of Kerosene Components in a Complex Mixture

Science.gov (United States)

Pacot, Giselle Mae M.; Lee, Lyn May; Chin, Sung-Tong; Marriott, Philip J.

2016-01-01

Gas chromatography-mass spectrometry (GC-MS) and GC-tandem MS (GC-MS/MS) are useful in many separation and characterization procedures. GC-MS is now a common tool in industry and research, and increasingly, GC-MS/MS is applied to the measurement of trace components in complex mixtures. This report describes an upper-level undergraduate experiment…

Performance of a domestic cooking wick stove using fatty acid methyl esters (FAME) from oil plants in Kenya

Energy Technology Data Exchange (ETDEWEB)

Wagutu, Agatha W.; Chhabra, Sumesh C.; Lang' at-Thoruwa, Caroline C. [Department of Chemistry, Kenyatta University, P.O. Box 43844-0100, Nairobi (Kenya); Thoruwa, Thomas F.N. [Department of Energy Engineering, Kenyatta University, P.O. Box 43844, Nairobi (Kenya); Mahunnah, R.L.A. [University of Dar-es Salaam, Muhimbili College of Medicine, P.O. Box 53486, Dar-es Salaam (Tanzania)

2010-08-15

With depletion of solid biomass fuels and their rising costs in recent years, there has been a shift towards using kerosene and liquefied petroleum gas (LPG) for domestic cooking in Kenya. However, the use of kerosene is associated with health and safety problems. Therefore, it is necessary to develop a clean, safe and sustainable liquid bio-fuel. Plant oil derivatives fatty acid methyl esters (FAME) present such a promising solution. This paper presents the performance of a wick stove using FAME fuels derived from oil plants: Jatropha curcus L. (Physic nut), Croton megalocarpus Hutch, Calodendrum capense (L.f.) Thunb., Cocos nucifera L. (coconut), soyabeans and sunflower. The FAME performance tests were based on the standard water-boiling tests (WBT) and compared with kerosene. Unlike kerosene all FAME fuels burned with odorless and non-pungent smell generating an average firepower of 1095 W with specific fuel consumption of 44.6 g L{sup -1} (55% higher than kerosene). The flash points of the FAME fuels obtained were typically much higher (2.3-3.3 times) than kerosene implying that they are much safer to use than kerosene. From the results obtained, it was concluded that the FAME fuels have potential to provide safe and sustainable cooking liquid fuel in developing countries. (author)

Performance of a domestic cooking wick stove using fatty acid methyl esters (FAME) from oil plants in Kenya

International Nuclear Information System (INIS)

Wagutu, Agatha W.; Thoruwa, Thomas F.N.; Chhabra, Sumesh C.; Lang'at-Thoruwa, Caroline C.; Mahunnah, R.L.A.

2010-01-01

With depletion of solid biomass fuels and their rising costs in recent years, there has been a shift towards using kerosene and liquefied petroleum gas (LPG) for domestic cooking in Kenya. However, the use of kerosene is associated with health and safety problems. Therefore, it is necessary to develop a clean, safe and sustainable liquid bio-fuel. Plant oil derivatives fatty acid methyl esters (FAME) present such a promising solution. This paper presents the performance of a wick stove using FAME fuels derived from oil plants: Jatropha curcus L. (Physic nut), Croton megalocarpus Hutch, Calodendrum capense (L.f.) Thunb., Cocos nucifera L. (coconut), soyabeans and sunflower. The FAME performance tests were based on the standard water-boiling tests (WBT) and compared with kerosene. Unlike kerosene all FAME fuels burned with odorless and non-pungent smell generating an average firepower of 1095 W with specific fuel consumption of 44.6 g L -1 (55% higher than kerosene). The flash points of the FAME fuels obtained were typically much higher (2.3-3.3 times) than kerosene implying that they are much safer to use than kerosene. From the results obtained, it was concluded that the FAME fuels have potential to provide safe and sustainable cooking liquid fuel in developing countries.

Sources of Combustion Products: An Introduction to Indoor Air Quality

Science.gov (United States)

In addition to environmental tobacco smoke, other sources of combustion products are unvented kerosene and gas space heaters, woodstoves, fireplaces, and gas stoves. The major pollutants released are carbon monoxide, nitrogen dioxide, and particles.

Thermodynamic evaluation of a kerosene pre- Fraction unit using energy and exergy analysis

Directory of Open Access Journals (Sweden)

Ehsan Ghasemi

2017-09-01

Full Text Available This work applies the method of energy and exergy analysis over first step of linear alkyl benzene (LAB production namely kerosene pre fraction plant, to determine unit energy and exergy performance and loss, besides of opportunities for improvement based on operational data. For this purpose macroscopic energy and exergy balance was developed over main equipment including electro pumps, heat exchangers, air coolers, and distillation columns. The results shows that total energy performance of plant is 92.62% by 19.76 MW energy lost, while from exergy perspective, unit performance is 78.08% by 17.92 MW exergy lost. Maximum local exergy lost occurs in the feed pre heater exchanger by 27% performance which is designed to recover energy from top product of second column, furthermore results shows that upgrading low quality energy in air coolers based on heat pump concept would protect energy and exergy emission to the environment and reduce 40% of total lost energy and 16% of total lost exergy in plant.

Methods of Uranium Determination in solutions of Tributyl Phosphate and Kerosene; Metodos de determinacion de uranio en soluciones de fosfato de tributilo y queroseno

Energy Technology Data Exchange (ETDEWEB)

Petrement Eguiluz, J; Palomares Delgado, F

1962-07-01

A new analytical method for the determination of uranium in organic solutions of tributyl phosphate and kerosene is proposed. In this method the uranium is reectracted from the aqueous phase by reduction with cadmium in acid solution. The uranium can be determined in this solution by the usual methods. In case of very diluted solutions, a direct spectrophtometrical determination of uranium in the organic phase with dibenzoylmethane is proposed. (Author) 21 refs.

Demand for cooking fuels in a developing country: To what extent do taste and preferences matter?

Energy Technology Data Exchange (ETDEWEB)

Akpalu, Wisdom, E-mail: wakpalu@yahoo.com [Department of History, Economics and Politics, Farmingdale State College, State University of New York, Farmingdale, 2350 Broadhollow Road, NY 11735 (United States); Dasmani, Isaac; Aglobitse, Peter B. [Department of Economics, University of Cape Coast, Cape Coast (Ghana)

2011-10-15

Overreliance on biomass energy, such as firewood and charcoal, for cooking in developing countries has contributed to high rates of deforestation and resulted in substantial indoor pollution, which has negatively impacted the health of many individuals. However, the effectiveness of public policies aimed at encouraging households to switch to cleaner fuels, such as liquefied petroleum gas (LPG) and kerosene, hinges on the extent to which they are mentally committed to specific fuels. Using data on four cooking fuels (charcoal, firewood, LPG, and kerosene) from the Ghana living standards survey, we found strong evidence that the most preferred fuel is LPG, followed by charcoal, with kerosene the least preferred. In addition, with the exception of kerosene that has price-elastic demand, the price elasticities of demand for the fuel types examined are inelastic. This finding suggests the so-called fuel-ladder is not robust. - Highlights: > Overreliance on biomass energy for cooking has contributed to deforestation and indoor pollution. > We estimate demand for four cooking fuels (charcoal, firewood, LPG, and kerosene) in Ghana. > We found that the most preferred fuel is LPG, followed by charcoal, with kerosene the least preferred. > This finding suggests the so-called fuel-ladder is not robust.

Characterisation and catalytic upgrading of tars from coal-tyre hydropyrolysis

Energy Technology Data Exchange (ETDEWEB)

Mastral, A.M.; Murillo, R.; Callen, M.S.; Garcia, T. [Instituto de Carboquimica, Zaragoza (Spain)

1999-07-01

Tars from coal-tyre hydropyrolysis obtained in a swept fixed bed reactor were upgraded with catalysts. Upgraded oils were characterized, and naphtha, kerosene, gas oil, heavy gas oil and vacuum residue percentages were quantified. 7 refs., 3 tabs.

Methods of Visually Determining the Air Flow Around Airplanes

Science.gov (United States)

Gough, Melvin N; Johnson, Ernest

1932-01-01

This report describes methods used by the National Advisory Committee for Aeronautics to study visually the air flow around airplanes. The use of streamers, oil and exhaust gas streaks, lampblack and kerosene, powdered materials, and kerosene smoke is briefly described. The generation and distribution of smoke from candles and from titanium tetrachloride are described in greater detail because they appear most advantageous for general application. Examples are included showing results of the various methods.

Demand for cooking fuels in a developing country: To what extent do taste and preferences matter?

International Nuclear Information System (INIS)

Akpalu, Wisdom; Dasmani, Isaac; Aglobitse, Peter B.

2011-01-01

Overreliance on biomass energy, such as firewood and charcoal, for cooking in developing countries has contributed to high rates of deforestation and resulted in substantial indoor pollution, which has negatively impacted the health of many individuals. However, the effectiveness of public policies aimed at encouraging households to switch to cleaner fuels, such as liquefied petroleum gas (LPG) and kerosene, hinges on the extent to which they are mentally committed to specific fuels. Using data on four cooking fuels (charcoal, firewood, LPG, and kerosene) from the Ghana living standards survey, we found strong evidence that the most preferred fuel is LPG, followed by charcoal, with kerosene the least preferred. In addition, with the exception of kerosene that has price-elastic demand, the price elasticities of demand for the fuel types examined are inelastic. This finding suggests the so-called fuel-ladder is not robust. - Highlights: → Overreliance on biomass energy for cooking has contributed to deforestation and indoor pollution. → We estimate demand for four cooking fuels (charcoal, firewood, LPG, and kerosene) in Ghana. → We found that the most preferred fuel is LPG, followed by charcoal, with kerosene the least preferred. → This finding suggests the so-called fuel-ladder is not robust.

Investigation on the efficience precipitation of uranium from kerosene solution of 2-di-ethylhexylphosphoric acid (D2EHPA) + TOPO after 2rd extraction process

International Nuclear Information System (INIS)

Misiak, R.; Tlalka, M.

1985-01-01

The model extraction systems: D2EHPA + TOPO + U(6) + kerosene -(NH 4 ) 2 CO 3 were examined on creation of the emulsion. The stability of the primary emulsions, dispersion type and the time of living were determined. Filtration possibilities under atmospheric and low pressure on ammonium-uranyl carbonate were investigated. The influence of temperature on velocity separation of the emulsion and the kinetics of stripping of uranium was given. Colorimetric method has been used for determination yield of the uranium. 2 refs., 8 figs. (author)

La narrativa transmedia como experiencia de simulación de inteligencia colectiva. El caso de Atrapados

Directory of Open Access Journals (Sweden)

Jaime Alejandro Rodríguez Ruiz

2015-01-01

Full Text Available Este artículo describe y analiza la experiencia transmedia del proyecto de investigación “Simulador IC, un escenario transmedial de pruebas para la simulación de inteligencia colectiva”, en el que se exploró la capacidad de cuatro artefactos ficcionales — texto literario, cómic, videojuego y juego de rol—, generados a partir de la transmediación de un texto literario fuente, para desarrollar sensibilidad en la resolución de problemas con características vinculadas a la inteligencia colectiva. El método de investigación fue mixto, con un componente principal cualitativo y un componente cuantitativo —metodología observacional—. Al realizarse una medición del gradiente de inteligencia colectiva de los participantes, tras el contacto y la interacción con diversas estrategias de simulación de los problemas —combinación de artefactos, según un diseño experimental específico—, se comprobó que la experiencia transmedia completa, es decir, la interac - ción con los cuatro artefactos potencia los efectos y beneficios de la simulación con artefactos individuales. Se concluye también que los participantes que interactuaron con diversas combinaciones de artefactos ofrecieron alternativas de solución colaborativas a problemas de la vida cotidiana.

Modeling Fuel Choice among Households in Northern Cameroon

Directory of Open Access Journals (Sweden)

Jean Hugues Nlom

2015-07-01

Full Text Available The present study aims to explore economic and socio-demographic factors that influence a household’s probability to switch from firewood to cleaner fuels (kerosene and LPG in northern Cameroon. The paper employs an ordered probit model to construct cooking patterns and fuel choices. Three main cooking sources are considered: firewood, kerosene, and liquefied petroleum gas. Utilized data are derived from a national survey conducted in 2004 by the Cameroonian National Institute of Statistics. The study analyzes the data related to the Sudano-Sahelian agro-ecological zone, which is one of the most affected by land degradation and decertification. While results indicate that there is a potential for a transition from traditional to cleaner fuels in the studied region, this transition is still in its earlier stage. The research demonstrates that firewood and kerosene prices, age of household heads, educational level of household heads and willingness to have a gas cylinder, as well as type of dwelling have a statistically significant impact on fuel-switching decisions.

Providing cleaner energy access in Indonesia through the megaproject of kerosene conversion to LPG

International Nuclear Information System (INIS)

Budya, Hanung; Yasir Arofat, Muhammad

2011-01-01

In 2007 Indonesia undertook a massive energy program to convert its primary cooking fuel from kerosene to LPG in more than 50 million households. This megaproject, to be completed in late 2011, provided an improved household cooking fuel, with its associated benefits in user costs, cleanliness, convenience, and environment, and reduced the government's huge subsidy for petroleum fuels. Presented from the perspective of Pertamina, Indonesia's sole NOC, and the program implementer, this paper describes the background of the fuels situation, the planning stages, including the preparatory analytical work, targeted market surveys and tests, and the subsequent building of the financial, technical, and institutional models for carrying out the program on an expeditious schedule. It presents the project's major execution steps, results of the program to date, and the unique institutional roles of each party, including the activities and benefits for the government, Pertamina, the public, the industry, and the crucial agents in the fuel supply chains. Finally there is a retrospective policy analysis and a discussion of key factors and challenges in the execution of Indonesia's largest-ever energy initiative to provide improved cooking fuel.

PENGARUH ILUMINASI ATRAKTOR CAHAYA TERHADAP HASIL TANGKAPAN IKAN PADA BAGAN APUNG PELABUHAN RATU

Directory of Open Access Journals (Sweden)

Regi Fiji Anggawangsa

2016-04-01

Full Text Available Atraktor cahaya sebagai alat bantu penangkapan banyak digunakan untuk mengumpulkan ikan pada alat tangkap bagan apung. Tiga macam atraktor cahaya, yaitu petromaks minyak tanah (dengan iluminasi maksimal 80 lux, petromaks gas (dengan iluminasi maksimal 60 lux, dan lampu genset (dengan iluminasi maksimal 500 lux digunakan pada bagan apung di Palabuhanratu. Penelitian ini bertujuan untuk mengetahui pengaruh perbedaan iluminasi cahaya pada ketiga macam sumber cahaya tersebut terhadap hasil tangkapan bagan apung. Metode yang digunakan adalah eksperimen penangkapan ikan dengan menggunakan tiga jenis atraktor cahaya pada bagan apung. Hasil penelitian menunjukkan perbedaan iluminasi atraktor cahaya pada bagan apung berpengaruh terhadap komposisi hasil tangkapan. Hasil tangkapan bagan pada saat menggunakan atraktor cahaya petromaks minyak tanah (80 lux didominasi oleh ikan layur (Trichiurus spp. yang mencapai lebih dari 50%, petromaks gas (60 lux didominasi oleh ikan layur (Trichiurus spp. dan cumi-cumi (Loligo spp. sedangkan untuk atraktor lampu genset (500 lux didominasi oleh layur dan cumi-cumi.   Light attractor has been used as a fishing device to gather fish schooling on lift net. There are three types of light attractors i.e. kerosene pressure lamp, gas pressure lamp and genset lamp used by Palabuhanratu’s lift net. The aim of this research is to investigate the effect of those light attractors on the lift net catches. The experimental fishing method was used. The results show that illumination produced by genset lamp was higher (500 lux than the two other light attractors at all observation positions with maximum illumination obtained of 80 lux for kerosene pressure lamp and 60 lux for gas pressure lamp. Catch of lift net when using kerosene pressure lamp attractor (80 lux was dominated by hairtail fish (Trichiurus spp. that reaches more than 50%, gas kerosene lamps attractor (60 lux was dominated by fish Layur (Trichiurus spp. and squid

Measurement and modeling of density and viscosity of n-octanol-kerosene-phosphoric acid solutions in a temperature range 293.15-333.15 K

Science.gov (United States)

Ye, Changwen; Pei, Xiangjun; Liu, J. C.

2016-12-01

Densities and viscosities have been measured for the n-octanol + aviation kerosene (AK) + phosphoric acid (H3PO4) system with the mass fraction of H3PO4 in the range from w = 0 to 0.26 and in the temperature of 293.15-333.15 K. According to the experimental data, the measured viscosities were found well correlated with the temperature and mass fraction of H3PO4, which were fitted to regression equations. The result shows that the dilution effect of AK is obvious under the same temperature and mass fraction of H3PO4.

40 CFR 98.38 - Definitions.

Science.gov (United States)

2010-07-01

... Still Gas 0.143 66.72 Kerosene 0.135 75.20 Liquefied petroleum gases (LPG) 0.092 62.98 Propane 0.091 61... GREENHOUSE GAS REPORTING General Stationary Fuel Combustion Sources § 98.38 Definitions. All terms used in... 93.65 Mixed (Industrial sector) 22.35 93.91 Mixed (Electric Power sector) 19.73 94.38 Natural gas mm...

Characterization of crude oils and petroleum products: (I Elution liquid chromatographic separation and gas chromatographic analysis of crude oils and petroleum products

Directory of Open Access Journals (Sweden)

E.O. Odebunmi

2002-12-01

Full Text Available Some physical and chemical properties of samples of light, medium and heavy Nigerian crude oils and petroleum products including gasoline, kerosene and engine oil have been measured and are reported in this paper. The crude oils and petroleum products have also been characterized by fractional distillation and elution liquid chromatography. The fractions obtained from elution liquid chromatography were analyzed using gas chromatography (GC. The GC fractions were identified by comparing the retention time of peaks in the unknown samples with those of components of calibration standard mixtures. The importance of the physico-chemical properties and the significance of the fractional distillation and chromatographic separation methods to industrial process operations have been discussed.

An anodic alumina supported Ni-Pt bimetallic plate-type catalysts for multi-reforming of methane, kerosene and ethanol

KAUST Repository

Zhou, Lu

2014-05-01

An anodic alumina supported Ni-Pt bimetallic plate-type catalyst was prepared by a two-step impregnation method. The trace amount 0.08 wt% of Pt doping efficiently suppressed the nickel particle sintering and improved the nickel oxides reducibility. The prepared Ni-Pt catalyst showed excellent performance during steam reforming of methane, kerosene and ethanol under both 3000 h stationary and 500-time daily start-up and shut-down operation modes. Self-activation ability of this catalyst was evidenced, which was considered to be resulted from the hydrogen spillover effect over Ni-Pt alloy. In addition, an integrated combustion-reforming reactor was proposed in this study. However, the sintering of the alumina support is still a critical issue for the industrialization of Ni-Pt catalyst. Copyright © 2014, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.

Extraction of Uranium in The Mixtures of Nitric and Sulfuric Acids With Neutral and Basic Ligands in Kerosene

International Nuclear Information System (INIS)

Nampira, Y; Rahayu Imam, S; Djoyosubroto, H

1998-01-01

The tendency of uranium ion in the mixture of nitric and sulfuric acid's medium is to from uranyl sulphate complex. The compound of uranyl sulphate is containing into the heteropoly compound that has acid property. Regarding to the mentioned property, the U extraction process was carried out using a basic or neutral complexing agent containing a ligand that formed the soluble uranium complex in the organic solvent (kerosene).The use of basic complexing agent such as n,tri-octyl amine is more suitable than that of tri butyl phosphate as a neutral agent. The maximum distribution coefficient of uranium will be reached if the maximum concentration of nitric acid and sulphuric acid can be maintained at 0.3 M and 1.5 M respectively in the organic solvent medium consisted n,tri-octyl amine of 30% volume fraction

Numerical Study of the Working Process in the Reducing Gas Generator of the Upper Stage Oxygen - Methane Engine

Directory of Open Access Journals (Sweden)

D. M. Yagodnikov

2015-01-01

Full Text Available This article deals with the problems of creating a reducing gas generator of the liquid rocket engine (LRE of upper stage using advanced fuel components, namely oxygen + liquid natural gas. Relevance of the work is justified by the need to create and develop of environmentally friendly missile systems for space applications using methane-based fuel (liquid natural gas. As compared to the currently used unsymmetrical dimethyl-hydrazine and kerosene, this fuel is environmentally safe, passive to corrosion, has better cooling properties and high energy characteristics in the re-generatively cooled chambers, as well as is advantageous for LRE of multiple start and use.The purpose of this work is a mathematical modeling, calculation of the working process efficiency, as well as study of gas-dynamic structure of the flow in the gas generator flow path. The object of study is the upper stage LRE gas generator, which uses the reducing scheme on the liquid propellants: oxygen + liquid methane. Research methods are based on numerical simulation.Computational studies allowed us to receive the velocity, temperatures, and concentrations of reactants and combustion products in the longitudinal section of gas generator. Analysis of the gas-dynamic structure of flow shows a complete equalization of the velocity field by 2/3 of the gas generator length. Thus, the same distance is not enough to equalize the temperature distribution of the gasification products and their concentrations in radius. Increasing the total excess oxidant ratio from 0.15 to 0.25 leads to a greater spread of the parameters at the exit of the gas generator by ~ 13 ÷ 17%. As a recommendation to reduce the size of the working area, is proposed a dual-zone gas generator-mixing scheme with fuel separately supplied to the first and second zones.

Studi Eksperimen Pengaruh Pencampuran Gas Hidrogen Dari Generator HHO Tipe Kering Dengan Bahan Bakar Kerosene Pada Distribusi Temperatur Nyala Api Kompor Tekan Blowtorch

Directory of Open Access Journals (Sweden)

Brillyano Agni Pradipta

2013-09-01

Full Text Available Gas hidrogen mempunyai nilai kalor yang dapat dimanfaatkan untuk menambah energi  pada berbagai keperluan pembakaran, bahkan dapat mengurangi penggunaan bahan bakar konvensional yang digunakan saat ini. Blowtorch kerosin digunakan sebagai alat uji. Pengujian dilakukan dengan menggabungkan bahan bakar kerosin dan gas hidrogen dalam HHO yang dihasilkan dari generator HHO tipe kering dengan plat SS316L berukuran 16mmx16mm sebanyak 15 plat sebagai elektroda dan larutan elektrolit KOH dilengkapi Pulse Width Modulation (PWM sebagai alat pengontrol generator HHO dengan duty cycle 25%, 50%, dan 75%. Penggabungan bahan bakar dilakukan secara difusi menggunakan ejector. Hasil yang didapatkan bahwa efisiensi unjuk kerja generator HHO tertinggi pada duty cycle 25%, yaitu sebesar 54,32% dan efisiensi terendah pada generator HHO tanpa PWM, yaitu sebesar 13,2%. Temperatur api yang dihasilkan gabungan kerosin dan gas HHO lebih panas dari pembakaran kerosin saja. Gabungan daya bahan bakar yang dihasilkan gas HHO sebesar 16,5W dan daya yang dikeluarkan kerosin murni sebesar 25,77kW, menaikkan temperatur api lebih dari 100oC dari temperatur api hasil pembakaran kerosin murni .

Comparación e Inferencia en la Categorización de Artefactos No Familiares: Un Estudio con Niños Pequeños Comparison and Inference in the Categorization of Non-Familiar Artifacts: A Study With Young Children

Directory of Open Access Journals (Sweden)

Andrea Sabina Taverna

2012-05-01

Full Text Available Investigaciones sobre el desarrollo de categorías muestran que procesos cognitivos como la comparación y la inferencia promueven el conocimiento conceptual. Este artículo reporta el estudio de estos procesos en la categorización de objetos no familiares, utilizando una prueba de elecciones forzosas y palabra extendida, manipulando propiedades funcionales de objetos nuevos. Utilizando una muestra accidental, el Estudio 1 examinó si 42 niños de 3 a 5 años extendían un nombre nuevo a un artefacto no familiar en base a su función, encontrándose un desempeño exitoso solo a los 5 años. El Estudio 2 investigó la comparación en la formación de categorías en 48 niños de 4 años y en el Estudio 3 se estudiaron los efectos de la inferencia en 24 niños de 4 años. Únicamente los niños que compararon artefactos bajo un rótulo común sortearon el sesgo perceptivo, formando categorías nuevas, no así los que fueron invitados a realizar inferencias en base a propiedades. Se discuten los alcances de la comparación y las limitaciones de la inferencia en la categorización de objetos en ausencia de conocimiento conceptual previo.Prior research on category development has shown that cognitive processes such as comparison and inductive inference promote conceptual development, highlighting particular aspects of children's existing conceptual knowledge. This paper reports the study of children's comparison and inductive inference in the categorization of non-familiar objects. It used a forced-choice and word extension task with novel artifacts, manipulating their functional properties. Using an accidental sample, Study 1 assessed whether 2 to 5 years old children extended a novel word to a non-familiar artifact based of its function. It was found that only 5-year-olds succeeded. Study 2 tested the effects of comparison in the formation of categories in 48 4-year-olds and Study 3 the effects of inference in 24 4-year-old children. Only children

Stabilization of kerosene/water emulsions using bioemulsifiers obtained by fermentation of hemicellulosic sugars with Lactobacillus pentosus.

Science.gov (United States)

Portilla-Rivera, Oscar Manuel; Torrado, Ana María; Domínguez, José Manuel; Moldes, Ana Belén

2010-09-22

The results of the present study show that Lactobacillus pentosus can produce extracellular bioemulsifiers by utilizing hemicellulosic sugars from grape marc as a source of carbon. The effectiveness of these bioemulsifiers (LPEM) was studied by preparing kerosene/water (K/W) emulsions in the presence and absence of these emulsifiers. Various parameters such as relative emulsion volume (EV), stabilizing capacity (ES), viscosity, and droplet size of K/W emulsions were measured. The EV values for K/W emulsions stabilized by concentrated LPEM were approximately 74.5% after 72 h of emulsion formation, with ES values of 97%. These values were higher than those obtained with dodecyl sodium sulfate as emulsifier (EV=62.3% and ES=87.7%). Additionally, K/W emulsions stabilized by LPEM produced polydisperse emulsions containing droplets of radius between 10 and 40 μm, which were smaller than those obtained for K/W emulsions without LPEM (droplet radius=60-100 μm). Moreover, the viscosity values of the K/W emulsions without and with LPEM were approximately 236 and 495 cP, respectively.

On-line monitoring of the U(VI) concentration in 30 vol.% TBP/kerosene: an evaluation of real-time analysis in polyetheretherketone (PEEK) containers via Raman spectroscopy

International Nuclear Information System (INIS)

Xue Bai; Ding-Ming Li; Zhi-Yuan Chang; De-Jun Fan; Jin-Ping Liu; Hui Wang

2015-01-01

In order to evaluate the practicability of Raman spectroscopy for on-line U(VI) concentration monitoring in 30 vol.% TBP/kerosene within polyetheretherketone containers, laboratory scale experiments were performed and several influencing factors for real-time determination were investigated. A method of internal standard was employed for the first time. Software developed for real-time concentration data display can give the U(VI) concentration autonomously within several seconds. The study confirmed Raman spectroscopy as a promising methodology for on-line U(VI) concentration monitoring in organic phase. (author)

Studi Eksperimen Pengaruh Pencampuran Gas Hidrogen Dari Generator HHO Tipe Kering Dengan Bahan Bakar Kerosene Pada Distribusi Temperatur Nyala Api Kompor Tekan Blowtorch

OpenAIRE

Brillyano Agni Pradipta; Djoko Sungkono Kawano

2013-01-01

Gas hidrogen mempunyai nilai kalor yang dapat dimanfaatkan untuk menambah energi  pada berbagai keperluan pembakaran, bahkan dapat mengurangi penggunaan bahan bakar konvensional yang digunakan saat ini. Blowtorch kerosin digunakan sebagai alat uji. Pengujian dilakukan dengan menggabungkan bahan bakar kerosin dan gas hidrogen dalam HHO yang dihasilkan dari generator HHO tipe kering dengan plat SS316L berukuran 16mmx16mm sebanyak 15 plat sebagai elektroda dan larutan elektrolit KOH dilengkapi P...

Studi Eksperimen Pengaruh Pencampuran Gas Hidrogen Dari Generator HHO Tipe Kering Dengan Bahan Bakar Kerosene Pada Distribusi Temperatur Nyala Api Kompor Tekan Blowtorch

OpenAIRE

Pradipta, Brillyano Agni; Kawano, Djoko Sungkono

2013-01-01

Gas hidrogen mempunyai nilai kalor yang dapat dimanfaatkan untuk menambah energi pada berbagai keperluan pembakaran, bahkan dapat mengurangi penggunaan bahan bakar konvensional yang digunakan saat ini. Blowtorch kerosin digunakan sebagai alat uji. Pengujian dilakukan dengan menggabungkan bahan bakar kerosin dan gas hidrogen dalam HHO yang dihasilkan dari generator HHO tipe kering dengan plat SS316L berukuran 16mmx16mm sebanyak 15 plat sebagai elektroda dan larutan elektrolit KOH dilengkapi P...

Planar laser-induced fluorescence fuel imaging during gas-turbine relight

DEFF Research Database (Denmark)

Read, Robert; Rogerson, J.W.; Hochgreb, S.

2013-01-01

of ignition when the airflow rate is high. In the presence of flame, medium-sized burning droplets are observed close to the injector centerline. Flame interference resulting from fluorescence of polycyclic aromatic hydrocarbons is apparent, but small, suggesting that kerosene planar laser...

Energy poverty reduction by fuel switching. Impact evaluation of the LPG conversion program in Indonesia

International Nuclear Information System (INIS)

Andadari, Roos Kities; Mulder, Peter; Rietveld, Piet

2014-01-01

In low- and middle-income countries, Liquefied Petroleum Gas (LPG) can be an attractive alternative to the widespread use of traditional kerosene. Not only is LPG a relatively clean, safe and cost-effective fuel for households, its large-scale adoption also reduces the heavy burden of kerosene consumption subsidies on government budgets. Against this background, we evaluate the impact of a large government program to substitute LPG for kerosene in Indonesia. Using a household survey across urban, suburban and rural regions we find that this program was very effective in causing a large scale shift from kerosene to LPG. This shift was positively influenced by level of education, household size and household income. Contradicting the energy-ladder model, the LPG program, reinforced by an increase in the price of kerosene, led to increased stacking of fuels, including increasing consumption of both electricity and traditional biomass. In addition, our analysis shows that the LPG program failed to substantially reduce the overall number of energy-poor people, but it has been effective in alleviating extreme energy-poverty. Finally, we find that medium and higher income households in suburban areas benefitted most from the LPG program. - Highlights: • Impact evaluation of a government program to substitute LPG for kerosene in Indonesia. • The program caused a large scale shift from kerosene to LPG. • Contradicting the energy-ladder model, the program led to increased stacking of fuels. • The program did not substantially reduce overall energy poverty, but alleviated extreme energy-poverty. • Medium and higher income households in suburban areas benefitted most from the LPG program

Hydrocarbon pneumonia

Science.gov (United States)

... pneumonia is caused by drinking or breathing in gasoline , kerosene , furniture polish , paint thinner, or other oily ... Arterial blood gas monitoring Breathing support, including oxygen, inhalation treatment, breathing tube and ventilator (machine), in severe ...

STUDI EMISI TUNGKU MASAK RUMAH TANGGA (Study for Emission Characteristic of Household Stoves

Directory of Open Access Journals (Sweden)

Agus Haryanto

2013-03-01

Full Text Available The objective of this research was to study emission characteristic of household stoves. Five stoves were tested, namely clay pot biomass stove, brick biomass stove, kerosene stove, coal stove, and LPG stove.  Emission parameters to be measured were CO, NO2, SO2, and particulates. Gas emission was measured using gas analyzer Wolfsense TG 501, while particulate was determined based on Indonesian National Standard (SNI: 19-7117.12-2005. Results showed that LPG stove emitted no CO indicating that complete burning existed. Other stoves emitted CO with kerosene stove exhibited the highest CO emission of 1074 μg/m3. Biomass pot stoves produced SO2 (722 μg/m3 which is lower than LPG stove (1488 μg/m3 and kerosene stove (1055 μg/m3, but higher than coal stove (290 μg/m3. On the other side, biomass pot stoves produced more NO2 (99 μg/m3 with pot stove as compared to kerosene stove (25 μg/m3. Particulate emission increased based on the fuels used with an order from the lowest was LPG stove, kerosene stove, coal stove, and biomass stove. Key words: emission, stove, biomass, fossil fuels   ABSTRAK Tujuan penelitian ini adalah untuk mengkaji karakteristik emisi beberapa tungku atau kompor dapur rumah tangga. Penelitian dilakukan dengan menggunakan lima jenis tungku atau kompor, yaitu tungku biomassa pot tebal, tungku biomassa bata, kompor minyak tanah, kompor batubara, dan kompor LPG. Parameter emisi yang diukur meliputi CO, NO2, SO2 dan partikel. Emisi gas diukur menggunakan gas analyser Wolfsense TG 501, sedangkan emisi partikel debu ditentukan berdasarkan standar SNI 19-7117.12-2005. Hasil penelitian menunjukkan bahwa kompor LPG tidak menghasilkan emisi CO. Kompor minyak tanah menghasilkan emisi CO paling tinggi yaitu (1074 μg/m3. Kompor LPG menghasilkan emisi SO2 paling banyak (1488 μg/m3, diikuti kompor minyak tanah (1055 μg/m3, tungku kayu pot (722 μg/m3, dan kompor batubara (290 μg/m3. Di pihak lain, tungku biomassa pot tebal

[Design of coal stove, construction, assembly and test

International Nuclear Information System (INIS)

Bitrus, K.D.; Dauda, S.

2004-01-01

Some years back, after the discovery of Petroleum, Kerosene as one of the fraction of the distillation of Petroleum came into use as cooking fuel and a reduction in pressure was seen on wood and vegetation. Along this line, by the improvement of sciences and technology gas cooker and electric cooker were developed; but epileptic supply of electricity, gas and government policy on deforestation showed that continuous dependence on wood, electricity, gas and kerosene as the only sources of cooking fuel is not going to solve Nigeria domestic cooking problem. To solve this, coal as a source of heat energy could be used as a cooking fuel. However, this paper reports the design of coal stove, construction, assembly and test. The test result showed that using coal (anthracite) as the fuel on a pot of 200g containing 800g of water at room temperature could boil the water in 20 minutes

Comparative kinetic and equilibrium investigations on the extraction of U(IV) in nitric acid/Tbp or TLA-Kerosene systems

Energy Technology Data Exchange (ETDEWEB)

Daoud, J A; Khalifa, S M; Abdel Rahman, N; Aly, H F [Hot laboratories center, Atomic energy authority post code 13758, (Egypt)

1995-10-01

The extraction equilibrium of U(IV) by tributyl-phosphate (Tbp) or trilaurylamine (TLA) in kerosene from nitric acid media was investigated. The effect of the different parameters affecting the extraction was separately studied and compared. The kinetics of extraction of U(IV) by Tbp or TLA was also investigated using a stirred lewis cell. The data showed that the rate of extraction of U(IV) by Tbp is controlled by chemical reactions at the interface. In the TLA system, the extraction of U(IV) is controlled by chemical reactions at the interface and bulk phase. Rate equations show that the extraction of U(IV) is first order dependent on Tbp concentration while it is of fractional negative order with respect to TLA. The effect of temperature on the rate of extraction was also studied and the thermodynamic functions were evaluated for the two systems. 5 figs.

The Influence of Emulgator on Stability of Emulsion H3PO4 in Topo-Kerosene and Efficiency at Emulsion Membrane Extraction of La and Nd Concentrate Product of Monazite Sand Treatment

International Nuclear Information System (INIS)

Purwani, MV.; Bintarti, AN.; Subagiono, R.

2002-01-01

The making of La and Nd concentrate from monazite sand have been done. The separation of La and Nd by emulsion 1M H 3 PO 4 in 5 % TOPO-Kerosene membrane extraction. The feed or aqueous phase was La and Nd concentrate in 1M HNO 3 . Emulgator Span-80 and Tween-80 were used to stabilize emulsion membrane. The influence parameters were percentage of Span-80 and ratio of Span-80 and Tween-80. After formation of emulsion membrane, the extraction process was carried out. Ratio of volume of feed : volume membrane phase = 1 : 1, ratio of volume of 5% TOPO - Kerosene : ratio of volume of 1M H 3 PO 4 1 : 1. The best yield were obtained time of emulsification was 10 minutes with the speed of emulsion was 6000 rpm and concentration of span-80 was 5%. At this condition was obtained the extraction efficiency of La was 55.55%, the extraction efficiency of Nd was 41.6% the stripping efficiency of La was 35.05%, the stripping efficiency of Nd was 87.32 %, the total efficiency of La was 19.46%, the total efficiency of Nd was 36.30% and Separation factor of Nd and La = 1.87. (author)

Women's personal and indoor exposures to PM 2.5 in Mysore, India: Impact of domestic fuel usage

Science.gov (United States)

Andresen, Penny Rechkemmer; Ramachandran, Gurumurthy; Pai, Pramod; Maynard, Andrew

In traditional societies, women are more likely to be adversely affected by exposures to fine particulates from domestic fuel combustion due to their role in the family as the primary cooks. In this study, 24-h gravimetric personal and indoor PM 2.5 exposures were measured for 15 women using kerosene and another 15 women using liquefied petroleum gas (LPG) as their main cooking fuel in Mysore, India. The women also answered a detailed questionnaire regarding their residential housing characteristics, health status, cooking practices and socioeconomic status. Repeated measurements were obtained during two seasons. The main objective of this study was to determine whether exposures to PM 2.5 differed according to fuel usage patterns. A repeated-measures general linear model (GLM) was used to analyze the data. Women using kerosene as their primary cooking fuel had significantly higher exposures. During summer, the arithmetic mean (± standard error) for kerosene users personal exposure was 111±13 and 71±15 μg m -3 for LPG users. Kerosene users had higher exposures in winter (177±21 μg m -3) compared to summer exposures. However, for LPG users there was no difference in their seasonal geometric mean exposures at 71±13 μg m -3. Indoor concentrations followed similar patterns. In summer, kerosene-using households had an arithmetic mean concentration of 98±9 μg m -3 and LPG-using households had an arithmetic mean concentration of 71±9 μg m -3. Winter concentrations were significantly higher than summer concentrations for kerosene users (155±13 μg m -3). Again, LPG users showed only slightly higher indoor concentrations (73±6 μg m -3) than kerosene users. Socioeconomic status, age, season and income were significant predictors of cooking fuel choice.

Biodegradasi minyak oleh Rhodotorula dan Candida hasil isolasi dari Pelabuhan Tanjung Perak Surabaya

Directory of Open Access Journals (Sweden)

Tri Nurhariyati

2012-02-01

Full Text Available A research about isolation and capability of isolat yeast from Tanjung Perak Harbor, Surabaya in degrading kerosen, gas oil ,and lubricant were conducted. This research were done to know the influence of Rhodotorula, Candida and Mix of Rhodotorula and Candida; the influence of oil type and interaction of both (between yeast and oil in decreasing oil weight. Research design was laboratory experimental and using the factorial 4 × 3 with five replication. The data were analyzed by two-way ANOVA (p: 0.05 and followed by t test. The result of the biodegradation test showed that the kind of yeast, the kind of oil weight and interaction of both influence in decreasing of oil weight. The most decreasing of oil weight obtained by mix of Rhodotorula and Candida (82.55%, kerosen (66.59% and combination mix of yeast (Rhodotorula and Candida and kerosen (89.32%.

H-coal fluid dynamics. Final report, August 1, 1977-December 31, 1979

Energy Technology Data Exchange (ETDEWEB)

1980-04-16

This report presents the results of work aimed at understanding the hydrodynamic behavior of the H-Coal reactor. A summary of the literature search related to the fluid dynamic behavior of gas/liquid/solid systems has been presented. Design details of a cold flow unit were discussed. The process design of this cold flow model followed practices established by HRI in their process development unit. The cold fow unit has been used to conduct experiments with nitrogen, kerosene, or kerosene/coal char slurries, and HDS catalyst, which at room temperature have properties similar to those existing in the H-Coal reactor. Mineral oil, a high-viscosity liquid, was also used. The volume fractions occupied by gas/liquid slurries and catalyst particles were determined by several experimental techniques. The use of a mini-computer for data collection and calculation has greatly accelerated the analysis and reporting of data. Data on nitrogen/kerosene/HDS catalyst and coal char fines are presented in this paper. Correlations identified in the literature search were utilized to analyze the data. From this analysis it became evident that the Richardson-Zaki correlation describes the effect of slurry flow rate on catalyst expansion. Three-phase fluidization data were analyzed with two models.

determination of the levels of lead in the roadside soils of addis

African Journals Online (AJOL)

Admin

J. Sci., 35(2):81–94, 2012. © College of Natural Sciences, Addis Ababa University, 2012 ... originationg from vehicular exhaust, has been investigated. To this end, soil .... liquefied petroleum gas (LPG), motor gasoline, jet fuel, kerosene and ...

Study on the Combustion Properties of Bio-Coal Briquette Blends of ...

African Journals Online (AJOL)

2017-10-09

Oct 9, 2017 ... This study was carried out to investigate the properties of bio-coal briquette produced from blending cassava stalk and coal. ... solar, gas and kerosene will certainly take a few decades to ..... Physical Properties of. Briquettes ...

Heat Energy From Value-Added Sawdust Briquettes Of Albizia Zygia ...

African Journals Online (AJOL)

Choice-Academy

... physical properties between the sawdust briquettes and the solid wood of the same species were carried out. The results ... kerosene and cooking gas in Nigeria, draw attention to the .... between the physical properties of solid wood used for ...

Respiratory effects of biomass fuel combustion on rural fish smokers ...

African Journals Online (AJOL)

Among them is the peak expiratory flow rate(PEFR) which is preferred by general ... of substitutes such as kerosene and liquid petroleum gas. In Oyorokoto fishing ..... seeking behaviour of rural dwellers in Nigeria: a case study of Ekpoma in ...

A novel reactor type for autothermal reforming of diesel fuel and kerosene

International Nuclear Information System (INIS)

Pasel, Joachim; Samsun, Remzi Can; Tschauder, Andreas; Peters, Ralf; Stolten, Detlef

2015-01-01

Highlights: • Development and experimental evaluation of Juelich’s novel ATR reactor type. • Constructive integration of steam generation chamber and nozzle for water injection. • Internal steam generator modified to reduce pressure drop to approx. a thirtieth. • Novel concept for ATR heat management proven to be suitable for fuel cell systems. • Reaction conditions during shut-down and start-up optimized to reduce byproducts. - Abstract: This paper describes the development and experimental evaluation of Juelich’s novel reactor type ATR AH2 for autothermal reforming of diesel fuel and kerosene. ATR AH2 overcomes the disadvantages of Juelich’s former reactor generations from the perspective of the fuel cell system by constructively integrating an additional pressure swirl nozzle for the injection of cold water and a steam generation chamber. As a consequence, ATR AH2 eliminates the need for external process configurations for steam supply. Additionally, the internal steam generator has been modified by increasing its cross-sectional area and by decreasing its length. This measure reduces the pressure drop of the steam generator from approx. 500 mbar to roughly a thirtieth. The experimental evaluation of ATR AH2 at steady state revealed that the novel concept for heat management applied in ATR AH2 is suitable for fuel cell systems at any reformer load point between 20% and 120% when the mass fractions of cold water to the newly integrated nozzle are set to values between 40% and 50%. The experimental evaluation of ATR AH2 during start-up and shut-down showed that slight modifications of the reaction conditions during these transient phases greatly reduced the concentrations of ethene, ethane, propene and benzene in the reformate. From the fuel cell system perspective, these improvements provide a very beneficial contribution to longer stabilities for the catalysts and adsorption materials

GREENHOUSE GASES FROM BIOMASS AND FOSSIL FUEL STOVES IN DEVELOPING COUNTRIES: A MANILA PILOT STUDY

Science.gov (United States)

Samples were taken of the combustion gases released by household cookstoves in Manila, Philippines. In a total of 24 samples, 14 cookstoves were tested. These were fueled by liquefied petroleum gas (LPG), kerosene (three kinds of stoves), charcoal, and wood. Ambient samples were ...

Quarterly oil statistics. Second quarter, 1978

Energy Technology Data Exchange (ETDEWEB)

1978-01-01

This issue presents rapid and accurate information on supply and disposal of crude oil, oil products, and natural gas, including production, refinery output, trade, bunkers, refinery fuel and losses and stock changes. Detailed import and export data are given for 42 origins and 29 destinations for crude oil and products. NGL, feedstocks, naphtha, LPG, gasoline, kerosene, gas/diesel oil, and heavy fuel oil (residual) are covered. (DLC)

State energy price projections for the residential sector, 1992--1993

International Nuclear Information System (INIS)

1992-01-01

The purpose of this report, State Energy Price Projections for the Residential Sector, 1992--1993, is to provide projections of State-level residential prices for 1992 and 1993 for the following fuels: electricity, natural gas, heating oil, liquefied petroleum gas (LPG), kerosene, and coal. Prices for 1991 are also included for comparison purposes. This report also explains the methodology used to produce these estimates and the limitations

Environmental compatibility of CRYOPLANE the cryogenic-fuel aircraft

Energy Technology Data Exchange (ETDEWEB)

Klug, H.G. [Daimler Benz Aerospace Airbus, Hamburg (Germany)

1997-12-31

`CRYOPLANE` is the project name for an aircraft powered by cryogenic fuel, either liquid natural gas (LNG, mainly consisting of methane) or liquid hydrogen (LH{sub 2}). Emission of CO{sub 2}, unburnt hydrocarbons, soot and sulfur will be completely avoided by hydrogen combustion: LH{sub 2} is an extremely pure liquid. Emission of water as a primary combustion product is increased by a factor of 2.6. Exhaust gases behind hydrogen engines contain more water than behind kerosene engines, and hence can form contrails under a wider range of atmospheric conditions. Liquid hydrogen fueled aircraft promise big advantages relative to kerosene aircraft in terms of environmental compatibility. (R.P.)

Environmental compatibility of CRYOPLANE the cryogenic-fuel aircraft

Energy Technology Data Exchange (ETDEWEB)

Klug, H G [Daimler Benz Aerospace Airbus, Hamburg (Germany)

1998-12-31

`CRYOPLANE` is the project name for an aircraft powered by cryogenic fuel, either liquid natural gas (LNG, mainly consisting of methane) or liquid hydrogen (LH{sub 2}). Emission of CO{sub 2}, unburnt hydrocarbons, soot and sulfur will be completely avoided by hydrogen combustion: LH{sub 2} is an extremely pure liquid. Emission of water as a primary combustion product is increased by a factor of 2.6. Exhaust gases behind hydrogen engines contain more water than behind kerosene engines, and hence can form contrails under a wider range of atmospheric conditions. Liquid hydrogen fueled aircraft promise big advantages relative to kerosene aircraft in terms of environmental compatibility. (R.P.)

Implications of Different Household Cooking Energy on Indoor Air ...

African Journals Online (AJOL)

PROMOTING ACCESS TO AFRICAN RESEARCH ... Energy is a basic necessity of life for meeting domestic, social and industrial needs of man. ... The cooking methods sampled were firewood stove, kerosene stove, charcoal stove, electricity stove and gas cooker. ... EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

Proposal of Artifact for Motivational Analysis of Job CharacteristicsProposta de Artefato para Análise de Características Motivacionais do TrabalhoPropuesta de Artefacto para el Análisis de Características de Motivación en el Trabajo

Directory of Open Access Journals (Sweden)

DE SORDI, José Osvaldo

2013-09-01

Full Text Available ABSTRACTThe theory for studying the motivational potential of certain jobs – or job design – was developed for the context of an industrial society, one that is quite different from our current information society. This research proposes a device for discussing and analyzing the key characteristics of motivation referring to jobs, according to the theories of job design and to the information society context. This is a pragmatic research, which applies the Design Science research strategy. Based on an inventory and on content analysis of scientific research concerning job design – published in the twenty-first century in the electronic databases of PROQUEST and EBSCO scientific articles – the motivational characteristics that are associated to this theory were identified, structured and presented in the proposed device.RESUMOA teoria para estudo do potencial motivador de postos de trabalho, denominada job design, foi desenvolvida para o contexto da sociedade industrial, bastante distinta da atual sociedade da informação. Esta pesquisa propõe um artefato voltado para discussão e análise de características centrais da motivação associadas aos postos de trabalho, segundo as teorias de job design e o contexto da sociedade da informação. Trata-se de uma pesquisa pragmática, com emprego da estratégia de pesquisa Design Science. A partir do inventário e da análise de conteúdo das pesquisas científicas sobre job design, publicadas no século XXI nas bases eletrônicas de artigos científicos PROQUEST e EBSCO, características motivacionais associadas às dimensões dessa teoria são identificadas, estruturadas e apresentadas no artefato proposto.RESUMENLa teoría para estudiar el potencial motivacional de puestos de trabajo, denominado Job Design, se desarrolló en el contexto de la sociedad industrial, muy diferente a la actual sociedad de la información. Esta investigación propone un artefacto desarrollado a partir del debate

Diseño conceptual del sistema portante para un sensor GPR en un dispositivo para detección de minas antipersona en Antioquia-Colombia

OpenAIRE

Gutiérrez Bolívar, Julián

2011-01-01

Resumen: Se presenta el estado del arte de las Minas Antipersona (MAPs) y Artefactos Explosivos Improvisados (AEIs), planteando estadísticas globales y nacionales, de las víctimas de estos artefactos explosivos que han resultado heridas, mutiladas o muertas. Se realiza y presenta una revisión de los proyectos desarrollados en Colombia y otros países, los cuales son enfocados al desarrollo de dispositivos para la detección de MAPs, AEIs y otros tipos de minas. Se realiza una búsqueda de publi...

Performance assessment of a Multi-fuel Hybrid Engine for Future Aircraft

NARCIS (Netherlands)

Yin, F.; Gangoli Rao, A.

2016-01-01

This paper presents performance assessment of the proposed hybrid engine concept using Liquid Natural Gas (LNG) and kerosene. The multi-fuel hybrid engine is a new engine concept integrated with contra rotating fans, sequential dual combustion chambers to facilitate “Energy Mix” in aviation and a

Performance assessment of a multi-fuel hybrid engine for future aircraft

NARCIS (Netherlands)

Yin, F.; Gangoli Rao, A.; Bhat, Abhishek; Chen, Min

2018-01-01

This paper presents the performance assessment of a novel turbofan engine using two energy sources: Liquid Natural Gas (LNG) and kerosene, called Multi-Fuel Hybrid Engine (MFHE). The MFHE is a new engine concept consisting of several novel features, such as a contra-rotating fan to sustain

Subsistence Living and Global Climate Change: Implications of ...

African Journals Online (AJOL)

Consequently, creating short-term employment during off-season period for farmers, subsidising agricultural inputs, an appropriate policy that delivers gas and kerosene to the end-users for domestic use at affordable price, community participation in forest management, researches into the use of wind and solar energies, ...

Indoor and Outdoor Air Pollution- related Health Problem in Ethiopia ...

African Journals Online (AJOL)

kim

2010-09-21

Sep 21, 2010 ... 4Minstry of Environment, Forest and Climate Change, Ethiopia. Review article ... prioritize the training, monitoring, research and the overall agenda of .... intervention that substituted ethanol for kerosene fuels. In. Addis Ababa, there ..... considered in the policy include geothermal, coal, natural gas, solar and ...

A Study of ext ration equilibrium in the system:phosphoric acid produced in Aqaba-uranium-0.5 M de pa-0.125M TOPO diluted in kerosene

International Nuclear Information System (INIS)

Al-Matar, K.A.; Rawajfeh, M.K.

1995-01-01

The extraction of uranium from purified wet process Jordanian phosphoric acid by synergistic solvent 0.5 M de pa and 0.125 M TOPO diluted in kerosene has been studied as a function of temperature and electro-motive force. The uranium distribution coefficient was found to be directly proportional to the electro-motive force up to a limiting point. The uranium distribution coefficient was found to decrease with temperature.Distribution coefficients for the Jordanian acid were found to be higher than those for similar acids from elsewhere.An Aqueous to Organic phase ratio (A/O) recommended for use with the Jordanian acid is 2.5. 11 refs., 6 figs., 2 tab.(Author)

Traducción del modelo genérico del modelo de negocio a Object-Z

OpenAIRE

Daniele, Marcela; Martellotto, Paola; Baum, Gabriel Alfredo

2005-01-01

Este trabajo muestra el modelo genérico del modelo de negocio [BDMN04], representado gráficamente en términos de UML a través de un diagrama de clases, producto del análisis de los artefactos del Proceso Unificado que componen el modelo de negocio y sus relaciones. Además, se definen un conjunto de reglas que el modelo debe verificar. Esta demostrado que el modelado gráfico es muy útil para visualizar, especificar, construir y documentar los artefactos de un sistema, brindando un lenguaje ...

Emissions of carbonyl compounds from various cookstoves in China

International Nuclear Information System (INIS)

Zhang, J.; Smith, K.R.; Univ. of California, Berkeley, CA

1999-01-01

This paper presents a new database of carbonyl emission factors for commonly used cookstoves in China. The emission factors, reported both on a fuel-mass basis (mg/kg) and on a defined cooking-task basis (mg/task), were determined using a carbon balance approach for 22 types of fuel/stove combinations. These include various stoves using different species of crop residues and wood, kerosene, and several types of coals and gases. The results show that all the tested cookstoves produced formaldehyde and acetaldehyde and that the vast majority of the biomass stoves produced additional carbonyl compounds such as acetone, acrolein, propionaldehyde, crotonaldehyde, 2-butanone, isobutyraldehyde, butyraldehyde, isovaleraldehyde, valeraldehyde, hexaldehyde, benzaldehyde, o-tolualdehyde, m,p-tolualdehyde, and 2,4-dimethylbenzaldehyde. Carbonyls other than formaldehyde and acetaldehyde, however, were rarely generated by burning coal, coal gas, and natural gas. Kerosene and LPG stoves generated more carbonyl compounds than coal, coal gas, and natural gas stoves, but less than biomass stoves. Indoor levels of carbonyl compounds for typical village houses during cooking hours, estimated using a mass balance model and the measured emission factors, can be high enough to cause acute health effects documented for formaldehyde exposure, depending upon house parameters and individuals' susceptibility

A laboratory investigation on the influence of adsorbed gases and particles from the exhaust of a kerosene burner on the evaporation rate of ice crystals and the ice nucleating ability of the exhaust particles

Energy Technology Data Exchange (ETDEWEB)

Diehl, K; Mitra, S K; Pruppacher, H R [Johannes Gutenberg Univ., Mainz (Germany). Inst. fuer Physik der Atmosphaere

1998-12-31

Laboratory experiments are described during which the influence of the exhausts of a kerosene burner on microphysical processes were studied. In one experimental investigation the evaporation rates of polluted ice crystals were compared with the evaporation rates of pure ice crystals. During another experimental investigation the ice nucleating ability of the exhaust particles was studied. The results show that the evaporation rate of polluted ice crystals was significantly reduced and also that ice nucleation takes place between -20 and -38 deg C. (author) 7 refs.

A laboratory investigation on the influence of adsorbed gases and particles from the exhaust of a kerosene burner on the evaporation rate of ice crystals and the ice nucleating ability of the exhaust particles

Energy Technology Data Exchange (ETDEWEB)

Diehl, K.; Mitra, S.K.; Pruppacher, H.R. [Johannes Gutenberg Univ., Mainz (Germany). Inst. fuer Physik der Atmosphaere

1997-12-31

Laboratory experiments are described during which the influence of the exhausts of a kerosene burner on microphysical processes were studied. In one experimental investigation the evaporation rates of polluted ice crystals were compared with the evaporation rates of pure ice crystals. During another experimental investigation the ice nucleating ability of the exhaust particles was studied. The results show that the evaporation rate of polluted ice crystals was significantly reduced and also that ice nucleation takes place between -20 and -38 deg C. (author) 7 refs.

The determination of molar volumes of uranous nitrate and nitric acid in systems of U(NO3)4-HNO3-H2O and U(NO3)4-HNO3-30% TBP kerosene

International Nuclear Information System (INIS)

Tao Chengying

1986-01-01

The data of molar volumes of uranous nitrate and nitric acid are necessary for the calculation of the changes in phase volume during the extraction in U(NO 3 ) 4 -HNO 3 /30%TBP-kerosene system. However, the data of the partial molar volume of U(NO 3 ) 4 are not available in literature. In the present work, the molar volumes of U(NO 3 ) 4 and HNO 3 are calculated by linear fitting of the experimental data. The result of the molar volume of HNO 3 is consistent with those in literature

Fiscal 1998 research report. Survey on energy consumption in a residential sector; 1998 nendo chosa hokokusho. Minsei bumon energy shohi jittai chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

On energy consumption in a residential sector, the report reports the document survey result including new documents, and the result of the systematic national questionnaire survey carried out in small and medium cities to prepare the basic data for future development and introduction of petroleum substituting energy. The electric power consumption rate of detached houses (A) is larger by 0.6- 1.6Gcal/household/year than that of apartment houses (B) in every district. The gas consumption rate of A is smaller than that of B in Hokkaido, Kanto and Kyushu. The LPG consumption rate of Kinki district is largest in both A and B. The kerosene consumption rate of A is larger than that of B. In Hokkaido, the kerosene consumption is extremely large in heating, showing a ratio of 60% or more in A. In the other districts, the kerosene consumption is largest in hot water supply, showing 30% or more. Every consumption rate increases with annual household income. The average consumption rate of 4 districts is 11,137Mcal/household/year. (NEDO)

Catalytic degradation of waste high-density polyethylene into fuel products using BaCO{sub 3} as a catalyst

Energy Technology Data Exchange (ETDEWEB)

Jan, M. Rasul; Shah, Jasmin; Gulab, Hussain [Institute of Chemical Sciences, University of Peshawar, N.W.F.P. (Pakistan)

2010-11-15

Waste high-density polyethylene (HDPE) was degraded thermally and catalytically using BaCO{sub 3} as a catalyst under different conditions of temperature, cat/pol ratio and time. The oil collected at optimum conditions (450 C, 0.1 cat/pol ratio and 2 h reaction time) was fractionated at different temperatures and fuel property of the fractions and parent oil was evaluated by their physicochemical parameters for fuel tests. The results were compared with the standard values for gasoline, kerosene and diesel oil. Boiling point distribution (BPD) curves were plotted from the gas chromatographic study of the samples and compared with that of the standard gasoline, kerosene and diesel. The oil samples were analyzed using GC/MS in order to find out their composition. The physical parameters and the composition of the parent oil and its fractions support the resemblance of the samples with the standard fuel oils. The light fractions best match with gasoline, the middle fractions match with kerosene and the heavier fractions match with diesel oil in almost all of the characteristic properties. (author)

Characterization of petroleum distillates by GC-AED (coupling with gas chromatography and atomic emission detection); Caracterisation des distillats petroliers par couplage chromatographie en phase gazeuse et detection par emission atomique

Energy Technology Data Exchange (ETDEWEB)

Baco, F.

1997-05-21

This thesis describes the characterization of atmospheric petroleum distillates (kerosenes and gas-oils) and vacuum distillates by hyphenated technic of Gas Chromatography and Atomic Emission Detector (GC-AED). A gas chromatographic simulated distillation, which gives the weight % of sample as a function of the petroleum cut temperature, was adapted to the GC-AED to obtain an original information about the elemental composition profile. After generalities, historic of the development of the instrument and the first petroleum applications are described. In the experimental part, analytical conditions used, different technics of characterisation of distillates and the base of samples analyzed are exposed. After a study of the GC-AED`s performances for the target elements (C, H, S, N), a quantitative method for the elemental analysis of distillates was developed and validated at three levels: total elemental analysis, simulated distillation and elemental composition as a function of the distillation profile. Finally, different ways for the applications of the GC-AED in order to characterize the distillates were explored, in particular to classify products and predict some petroleum properties (cetane number, density,...). The more interesting outlook seems to be the prediction of some properties as a function of the distillation profile. (author) 155 refs.

and Some Preliminary Interpretations

Directory of Open Access Journals (Sweden)

J. Ramón Gil-García

2006-01-01

Full Text Available Académicos de diferentes disciplinas coinciden en que la cultura es un fenómeno complejo y su comprensión requiere de un análisis detallado. La complejidad inherente al estudio de patrones culturales y otras estructuras sociales no se deriva de su rareza en la sociedad. De hecho, están contenidas y representadas en eventos y artefactos de la vida cotidiana. Sin embargo, probablemente debido a esta frecuente interacción, en muchas ocasiones los individuos consideran obvia la existencia de estas estructuras macro-sociales y por tanto se vuelven difíciles de percibir. Un templo Hindú es un lugar en el que los artefactos físicos y las interacciones sociales reflejan ciertos patrones culturales y determinadas estructuras sociales. Este estudio proporciona una descripción detallada del espacio físico y una interpretación preliminar de los artefactos y acciones observadas dentro de un templo Hindú en los Estados Unidos. Algunos datos históricos y contextuales relevantes son proporcionados para enriquecer la presentación.

Solvent extraction of Zn(II) from aqueous sulphate media by di(2-ethylhexyl) phosphoric acid in kerosene

International Nuclear Information System (INIS)

Begum, D.A.; Alauddin, M.; Rahman, M.S.

2009-01-01

The extraction equilibrium studies of Zn(II) from sulphate medium by di(2-ethylhexyl) phosphoric acid (D2EHPA, H/sub 2/A/sub 2/) in kerosene revealed that the distribution ratio (D) decreased with the increase of initial (Zn(A(II) in the aqueous phase and increased with the increase of equilibrium pH and extractant concentration. The equilibration is reached within 2 min. The species extracted into the organic phase is thought to be ZnA2, HA. The pH and extractant dependencies were about 2 and 1.67, respectively. The distribution ratio decreased with the increase in sulphate ion concentration in the aqueous phase. The extraction equilibrium reaction is suggested as Zn/sup 2+/ /sub aq/ +1.5 (H/sub 2/A/sub 2/)org - (ZnA/sub 2/, HA)org +2H/sup +/ /sub aq/. The extraction equilibrium constant (kex) for the above reaction was calculated to be 10-2.26. The extraction process was endothermic in nature having positive DH value of 16.27 kJ/mol. The loading of D2EHPA by Zn(II) is about 4.50 g of Zn(II) by 0.10 M D2EHPA. Possible reaction mechanism has been suggested based on distribution data, extractant concentration and equilibrium pH of the aqueous phase. (author)

Improvement in supply chain management for oil and gas sector using drag reduction theory

International Nuclear Information System (INIS)

Anjum, A.A.; Chughtai, A.; Shafeeq, A.; Muhammad, A.

2010-01-01

Supply chain management is an integrative philosophy about managing the flow of distribution channels from supplier to the consumer. PARCO, an oil and gas company in Pakistan has three existing pipelines. Out of three, two pipelines are running parallel from Karachi to Mehmood kot. One pipeline is of crude oil and meeting the demand of PARCO refinery while second pipeline is of High Speed Diesel (HSD) and third pipeline is of (HSD and Kerosene) running from Mehmood Kot to Machhike (Sheikhupura). PARCO supply petroleum products from Shikarpur, Mehmood Kot, Faisalabad and Machhike to oil marketing companies (OMCs) as per their share, standard and demand. The purpose of these pipelines is to meet the country demand for petroleum products at various locations all over Pakistan. In the peak season when OMCs have high demand and receipt of product from PARCO pipelines are less, there is a need to enhance the flow rate of oil inside the PARCO pipelines to fulfill the demand of OMCs. This could be done economically by the application of drag reduction theory. So by injecting drag reducer, dragging of the oil inside the pipeline could appreciably be reduced thereby improving the pumping of oil. (author)

Evaluation of cooking energy cost, efficiency, impact on air pollution and policy in Nigeria

International Nuclear Information System (INIS)

Anozie, A.N.; Bakare, A.R.; Sonibare, J.A.; Oyebisi, T.O.

2007-01-01

This study evaluated the cooking energy costs and efficiencies, the air pollution impacts of cooking energy consumption and the impact of the energy policy in the cooking energy sector in Nigeria. Water boiling and cooking experiments using the common cooking energy sources (fuel wood, kerosene, liquefied petroleum gas (LPG) and electricity) and common food items (water, yam and beans) were carried out. Energy surveys were carried out to determine the cooking energy use patterns in the urban and rural areas. It was found that fuel wood is the least expensive cooking energy source and LPG is the most expensive. Energy use efficiencies for boiling water were estimated at 25%, 46%, 73%, 79%, 66% and 90% for fuel wood, kerosene, gas, electric immersion coil, electric heating coil and electric hot plate, respectively. Energy intensity was found to be a comparative measure of energy efficiency. The impacts of air pollution from household cooking suggested a possibility of significant air pollutants contribution to the ambient environment using any of the energy carriers considered except electricity. The cooking energy use patterns showed that fuel wood is the predominant energy source for cooking in the rural areas while kerosene is the predominant energy source in the urban areas, revealing that the energy policy in the country had made no impact in the cooking energy sector. Recommendations for improving the energy supply situation were given and for removing the barriers that prevent the implementation of the recommendations

Oil and Gas Emergency Policy: Japan 2013 update

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-06-01

Oil remains the most significant energy source in Japan, accounting for some 45% of the country’s total primary energy supply (TPES) in 2011. Japan’s oil demand steadily decreased from 5.71 mb/d in 1997 to 4.47 mb/d in 2010. However, its oil demand increased to 4.48 mb/d in 2011 and 4.73 mb/d in 2012 due to the Great East Japan Earthquake in March 2011 and its subsequent impacts. The transport sector represented around 38% of total consumption in 2010, while the industry sector accounted for 30%. A significant proportion of the industry sector’s oil demand comes from the chemical industry. Of the 4.8 mb/d of oil imported by Japan in 2012, 3.5 mb/d consisted of crude oil, 209 kb/d of NGLs and feedstocks, and some 1.2 mb/d of refined products. About 83% of Japan’s crude oil imports in 2012 came from the Middle East. The country has 27 operational refineries with a total crude distillation capacity of around 4.5 mb/d. Japan meets its 90-day stockholding obligation to the IEA by holding government emergency stocks and by placing a minimum stockholding obligation on industry. JOGMEC’s primary role is to manage public stocks under the Oil Stockpiling Act, while industry (refineries, specified distributors and importers) is obliged to hold the equivalent of 70 days of their daily imports, sales or refinery production, based on the average of the previous 12 months. The public stocks mostly consist of crude oil, but the Administration has expanded its emergency inventory to include four categories of refined products - gasoline, kerosene, fuel oil and diesel oil. Japan held some 591 million barrels (mb) of oil stocks at the end of January 2013, equating to 166 days of 2011 net-imports (92 days of government stocks and 74 days of industry stocks). Around 72% of total stocks were held in the form of crude oil. Japan has consistently met its minimum IEA stockholding obligation. The share of natural gas in the country’s TPES increased significantly from 17% in 2010

Kitchen PM2.5 concentrations and child acute lower respiratory infection in Bhaktapur, Nepal: The importance of fuel type.

Science.gov (United States)

Bates, Michael N; Pokhrel, Amod K; Chandyo, Ram K; Valentiner-Branth, Palle; Mathisen, Maria; Basnet, Sudha; Strand, Tor A; Burnett, Richard T; Smith, Kirk R

2018-02-01

Globally, solid fuels are used by about 3 billion people for cooking and a smaller number use kerosene. These fuels have been associated with acute lower respiratory infection (ALRI) in children. Previous work in Bhaktapur, Nepal, showed comparable relationships of biomass and kerosene cooking fuels with ALRI in young children, compared to those using electricity for cooking. We examine the relationship of kitchen PM 2.5 concentrations to ALRI in those households. ALRI cases and age-matched controls were enrolled from a cohort of children 2-35 months old. 24-h PM 2.5 was measured once in each participant's kitchen. The main analysis was carried out with conditional logistic regression, with PM 2.5 measures specified both continuously and as quartiles. In the kitchens of 393 cases and 431 controls, quartiles of increasing PM 2.5 concentration were associated with a monotonic increase in odds ratios (OR): 1.51 (95% CI: 1.00, 2.27), 2.22 (1.47, 3.34), 2.48 (1.63, 3.77), for the 3 highest exposure quartiles. The general kitchen concentration-response shape across all stoves was supralinear. There was evidence for increased risk with biomass stoves, but the slope for kerosene stoves was steeper, the highest quartile OR being 5.36 (1.35, 21.3). Evidence for increased risk was also found for gas stoves. Results support previous reports that biomass and kerosene cooking fuels are both ALRI risk factors, but suggests that PM 2.5 from kerosene is more potent on a unit mass basis. Further studies with larger sample sizes and preferably using electricity as the baseline fuel are needed. Copyright © 2017 Elsevier Inc. All rights reserved.

Bioremediation capability and characterization of bacteria isolated from petroleum contaminated soils in Iran

Directory of Open Access Journals (Sweden)

Golafarin Ghoreishi

2017-07-01

Full Text Available This study was carried out to isolate bacteria for bioremediation of petroleum polluted soils. Five samples were used for isolation in this study. They were four soil samples in addition to one kerosene sample. The soil samples including soils contaminated by crude oil and gas oil and two soil samples with no outward contamination which were collected from Shiraz Oil Refinery sites. Seven strains were selected among the isolated colonies for further experiments. The selected isolates were cultured in standard succinate medium (SSM minimal medium in which 2.5% v/v kerosene was used as carbon source. In another bacterial SSM culture, carbon, sulfur or nitrogen source was removed and 20% v/v kerosene added to check the ability of isolates to utilizekerosene as sole source for C, N and S. Finally, cultures of four strains with higher growth in modified SSM cultures were selected for GC analysis. In this study they were named C2 and C4 which were isolated from crude oil contaminated soil and SI1 and SI2 isolated from soils with no outward contamination. GC analysis showed that C2 could degrade 69% of 5% v/v kerosene in 7 d, while C4 and SI1 degraded 48% and 42% of 5% v/v kerosene during this 7-d period respectively, and the degradation ability of SI2 was 38% after 7 d. Analysis of 16S rRNA gene showed that C2 was close to Citrobacter sedlakii, C4 and SI1 were related to Entrobacter hormeachei and SI2 was close to Entrobacter cloacae, respectively.

Mediación y geometría dinámica: una alternativa para involucrar a los estudiantes en la actividad demostrativa en geometría

OpenAIRE

Gallego, Adriana Patricia

2013-01-01

En este taller se presenta parte de una secuencia didáctica con la que se pretende favorecer la actividad demostrativa en una clase de geometría de grado octavo. Tal secuencia, fue diseñada con base a ejemplificar cómo podría ser el rol del profesor cunado emplea artefactos bajo la Teoría la Mediación Semiótica propuesta por Mariotti (2009). En este caso el artefacto empleado es Geogebra, un sofware de geometría dinámica (SGD). La secuencia hace parte de mi trabajo de grado para optar por el ...

77 FR 52708 - Request to Revise a Currently-Approved Data Collection

Science.gov (United States)

2012-08-30

... fueled by natural gas, petroleum coke, distillate fuel oil, and residual fuel oil. EIA will remove the..., kerosene, jet fuel, propoane, and waste oils. The reporting threshold for coal plants will remain at 50 MW... private analysts to monitor the status and trends of the electric power industry. The proposed changes to...

Household energy and consumption and expenditures, 1990

International Nuclear Information System (INIS)

1993-01-01

The purpose of this supplement to the Household Energy Consumption and Expenditures 1990 report is to provide information on the use of energy in residential housing units, specifically at the four Census regions and nine Census division levels. This report includes household energy consumption, expenditures, and prices for natural gas, electricity, fuel oil, liquefied petroleum gas (LPG), and kerosene as well as household wood consumption. For national-level data, see the main report, Household Energy Consumption and Expenditures 1990

Analyse des kérosènes et des gas oils moyens par spectrométrie de masse à moyenne résolution Analysis of Kerosenes and Middle Distillates by Medium-Resolution Mass Spectrometry

Directory of Open Access Journals (Sweden)

Castex H.

2006-11-01

Full Text Available Une méthode d'analyse par spectrométrie de masse des kérosènes et des distillats moyens dérivée de la norme ASTM D2425, a été développée. Elle utilise le même principe de calcul du carbone moyen pour déterminer le choix des matrices appropriées. Mais elle opère à moyenne résolution, effectuant ainsi le tri des différentes masses exactes d'hydrocarbures, composés soufrés et oxygénés et évitant de ce fait toute séparation préalable par chromatographie liquide (ASTM D2 549 . Les valeurs des matrices ont été modifiées en conséquence et le calcul du carbone moyen adapté à l'étude des coupes étroites et larges. A mass-spectrometry analysis method derived from the ASTM D2425 standard has been developed for kerosenes and middle distillates (185-345°C. It uses the same principle for calculating the mean carbon value to determine the appropriate matrices. But it works with medium reso-lution so as to sort out the different exact masses of hydrocarbons, sulfur and oxygenated compounds, thus avoiding any prior separation by liquid chromatography (ASTM D2549. Therefore, the matrix values have been modified, and the calculation of the mean carbon value has been adapted for analyzing narrow and wide distillation cuts.

Measurements of ultrafine particles from a gas-turbine burning biofuels

Energy Technology Data Exchange (ETDEWEB)

Allouis, C.; Beretta, F.; Minutolo, P.; Pagliara, R. [Istituto di Ricerche sulla Combustione, CNR, Piazzale V. Tecchio, 80, 80125 Napoli (Italy); Sirignano, M.; Sgro, L.A.; D' Anna, A. [Dipartimento di Ingegneria Chimica, Universita di Napoli Federico II, Piazzale V. Tecchio, 80, 80125 Napoli (Italy)

2010-04-15

Measurements of ultrafine particles have been performed at the exhaust of a low emission microturbine for power generation. This device has been fuelled with liquid fuels, including a commercial diesel oil, a mixture of the diesel oil with a biodiesel and kerosene, and tested under different loads. Primarily attention has been focused on the measurements of the size distribution functions of the particles emitted from the system by using particle differential mobility analysis. A bimodal size distribution function of the particle emitted has been found in all the examined conditions. Burning diesel oil, the first mode of the size distribution function of the combustion-formed particles is centered at around 2-3 nm, whereas the second mode is centered at about 20-30 nm. The increase of the turbine load and the addition of 50% of biodiesel has not caused changes in the shape of size distribution of the particles. A slightly decrease of the amount of particle formed has been found. By using kerosene the amount of emitted particles increases of more than one order of magnitude. Also the shape of the size distribution function changes with the first mode shifted towards larger particles of the order of 8-10 nm but with a lower emission of larger 20-30 nm particles. Overall, in this conditions, the mass concentration of particles is increased respect to the diesel oil operation. Particle sizes measured with the diesel oil have been compared with the results on a diesel engine operated in the same power conditions and with the same fuel. Measurements have showed that the mean sizes of the formed particles do not change in the two combustion systems. However, diesel engine emits a number concentration of particles more than two orders of magnitude higher in the same conditions of power and with the same fuel. By running the engine in more premixed-like conditions, the size distribution function of the particles approaches that measured by burning kerosene in the

Total-factor energy efficiency of regions in Japan

Energy Technology Data Exchange (ETDEWEB)

Honma, Satoshi [Faculty of Economics, Kyushu Sangyo University, 2-3-1 Matsukadai, Higashi-ku, Fukuoka 813-8503 (Japan); Hu, Jin-Li [Institute of Business and Management, National Chiao Tung University (China)

2008-02-15

This study computes the regional total-factor energy efficiency (TFEE) in Japan by employing the data envelopment analysis (DEA). A dataset of 47 prefectures in Japan for the period 1993-2003 is constructed. There are 14 inputs, including three production factors (labor employment, private, and public capital stocks) and 11 energy sources (electric power for commercial and industrial use, electric power for residential use, gasoline, kerosene, heavy oil, light oil, city gas, butane gas, propane gas, coal, and coke). GDP is the sole output. Following Fukao and Yue [2000. Regional factor inputs and convergence in Japan - how much can we apply closed economy neoclassical growth models? Economic Review 51, 136-151 (in Japanese)], data on private and public capital stocks are extended. All the nominal variables are transformed into real variables, taking into consideration the 1995 price level. For kerosene, gas oil, heavy oil, butane gas, coal, and coke, there are a few prefectures with TFEEs less than 0.7. The five most inefficient prefectures are Niigata, Wakayama, Hyogo, Chiba, and Yamaguchi. Inland regions and most regions along the Sea of Japan are efficient in energy use. Most of the inefficient prefectures that are developing mainly upon energy-intensive industries are located along the Pacific Belt Zone. A U-shaped relation similar to the environmental Kuznets curve (EKC) is discovered between energy efficiency and per capita income for the regions in Japan. (author)

Total-factor energy efficiency of regions in Japan

International Nuclear Information System (INIS)

Honma, Satoshi; Hu, Jin-Li

2008-01-01

This study computes the regional total-factor energy efficiency (TFEE) in Japan by employing the data envelopment analysis (DEA). A dataset of 47 prefectures in Japan for the period 1993-2003 is constructed. There are 14 inputs, including three production factors (labor employment, private, and public capital stocks) and 11 energy sources (electric power for commercial and industrial use, electric power for residential use, gasoline, kerosene, heavy oil, light oil, city gas, butane gas, propane gas, coal, and coke). GDP is the sole output. Following Fukao and Yue [2000. Regional factor inputs and convergence in Japan-how much can we apply closed economy neoclassical growth models? Economic Review 51, 136-151 (in Japanese)], data on private and public capital stocks are extended. All the nominal variables are transformed into real variables, taking into consideration the 1995 price level. For kerosene, gas oil, heavy oil, butane gas, coal, and coke, there are a few prefectures with TFEEs less than 0.7. The five most inefficient prefectures are Niigata, Wakayama, Hyogo, Chiba, and Yamaguchi. Inland regions and most regions along the Sea of Japan are efficient in energy use. Most of the inefficient prefectures that are developing mainly upon energy-intensive industries are located along the Pacific Belt Zone. A U-shaped relation similar to the environmental Kuznets curve (EKC) is discovered between energy efficiency and per capita income for the regions in Japan

Chemical kinetics of low and high temperature oxidation of reference fuels and of some additives at up to 40 bars; Cinetique chimique de l`oxydation de basse et haute temperature de combustibles de reference et de certains additifs jusqu`a 40 bars

Energy Technology Data Exchange (ETDEWEB)

Cathonnet, M.; Dagaut, Ph.; Reuillon, M.; Voisin, D. [Centre National de la Recherche Scientifique (CNRS), 45 - Orleans-la-Source (France). Laboratoire de Combustion et Systemes Reactifs

1996-12-31

A study of the oxidation of reference fuels for controlled ignition engines (n-heptane and iso-octane) and for turbojet engines (n-decane and TR0 kerosene) has been carried out in a self-agitated engine using gas jets at 1 to 40 bars and 550 to 1250 deg. K. Experimental results obtained have been used to propose a detailed kinetics mechanism for kerosene combustion. The study of the oxidation of oxygenated additives used in petrol (MTBE, ETBE, TAME, DIPE) and of the oxidation of a diesel substitute (DME) has been carried out in a self-agitated engine using gas jets at 1 to 10 bars and 800 to 1275 deg. K. These studies indicate that the oxidation of ether-type additives (MTBE, ETBE, TAME, DIPE) produces important oxygenated intermediates which are potential pollutants: formaldehyde, acetaldehyde, acrolein, and meth-acrolein. Butadiene and isoprene concentrations have been measured too. However, DME does not produce higher compounds but formaldehyde is one of its main oxidation intermediates. Chemical mechanisms leading to the formation of these pollutants are included in the proposed combustion models. (J.S.)

Exploration of government policy structure which support and block energy transition process in indonesia using system dynamics model

Science.gov (United States)

Destyanto, A. R.; Silalahi, T. D.; Hidayatno, A.

2017-11-01

System dynamic modeling is widely used to predict and simulate the energy system in several countries. One of the applications of system dynamics is to evaluate national energy policy alternatives, and energy efficiency analysis. Using system dynamic modeling, this research aims to evaluate the energy transition policy that has been implemented in Indonesia on the past conversion program of kerosene to LPG for household cook fuel consumption, which considered as successful energy transition program implemented since 2007. This research is important since Indonesia considered not yet succeeded to execute another energy transition program on conversion program of oil fuel to gas fuel for transportation that has started since 1989. The aim of this research is to explore which policy intervention that has significant contribution to support or even block the conversion program. Findings in this simulation show that policy intervention to withdraw the kerosene supply and government push to increase production capacity of the support equipment industries (gas stove, regulator, and LPG Cylinder) is the main influence on the success of the program conversion program.

Thermomagnetic characterization of organic-based ferrofluids prepared with Ni ferrite nanoparticles

International Nuclear Information System (INIS)

Arana, Mercedes; Bercoff, Paula G.; Jacobo, Silvia E.

2017-01-01

Highlights: • Kerosene-based ferrofluids of Ni-ferrite NPs from high energy ball milling. • Thermomagnetic characterization of organic-based ferrofluids. • Measured thermal variables enhancements of ferrofluid vs. magnetic field. • Curves successfully fitted by a gas-compression model of nanoaggregates. - Abstract: In this work, a thermomagnetic characterization of kerosene-based ferrofluids (FFs) prepared with Ni-ferrite nanoparticles (NPs) is performed by measuring their thermal conductivity and diffusivity coefficient enhancements. The particles were synthesized by high-energy ball milling, as an alternative to the most commonly chosen NPs synthesis methods for FFs. The action of an applied magnetic field on the FF increases the thermal conductivity and diffusivity due to cooperation between the NPs, as it agglomerates them favoring chain-like and clusters formations. It was found that the heat capacity of the studied FFs decreases under the application of a magnetic field. The obtained results for thermal conductivity of FFs under magnetic fields were fitted by a gas-compression model that considers NPs agglomerates in the fluid.

Thermomagnetic characterization of organic-based ferrofluids prepared with Ni ferrite nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Arana, Mercedes, E-mail: mercedes.arana@labh2.coppe.ufrj.br [Facultad de Matemática, Astronomía, Física y Computación (FaMAF), Universidad Nacional de Córdoba, IFEG, CONICET, Medina Allende s/n, Ciudad Universitaria, Córdoba (Argentina); Bercoff, Paula G. [Facultad de Matemática, Astronomía, Física y Computación (FaMAF), Universidad Nacional de Córdoba, IFEG, CONICET, Medina Allende s/n, Ciudad Universitaria, Córdoba (Argentina); Jacobo, Silvia E. [DiQuiMMAI, Facultad de Ingeniería, Universidad de Buenos Aires, INTECIN, CONICET, Av. Paseo Colón 850, Buenos Aires (Argentina)

2017-01-15

Highlights: • Kerosene-based ferrofluids of Ni-ferrite NPs from high energy ball milling. • Thermomagnetic characterization of organic-based ferrofluids. • Measured thermal variables enhancements of ferrofluid vs. magnetic field. • Curves successfully fitted by a gas-compression model of nanoaggregates. - Abstract: In this work, a thermomagnetic characterization of kerosene-based ferrofluids (FFs) prepared with Ni-ferrite nanoparticles (NPs) is performed by measuring their thermal conductivity and diffusivity coefficient enhancements. The particles were synthesized by high-energy ball milling, as an alternative to the most commonly chosen NPs synthesis methods for FFs. The action of an applied magnetic field on the FF increases the thermal conductivity and diffusivity due to cooperation between the NPs, as it agglomerates them favoring chain-like and clusters formations. It was found that the heat capacity of the studied FFs decreases under the application of a magnetic field. The obtained results for thermal conductivity of FFs under magnetic fields were fitted by a gas-compression model that considers NPs agglomerates in the fluid.

The Effect of Hydrogen Addition on the Combustion Characteristics of RP-3 Kerosene/Air Premixed Flames

Directory of Open Access Journals (Sweden)

Wen Zeng

2017-07-01

Full Text Available Experimental studies have been performed to investigate the effects of hydrogen addition on the combustion characteristics of Chinese No.3 jet fuel (RP-3 kerosene/air premixed flames. Experiments were carried out in a constant volume chamber and the influences of the initial temperatures of 390 and 420 K, initial pressures of 0.1 and 0.3 MPa, equivalence ratios of 0.6–1.6 and hydrogen additions of 0.0–0.5 on the laminar burning velocities, and Markstein numbers of Hydrogen (H2/RP-3/air mixtures were investigated. The results show that the flame front surfaces of RP-3/air mixtures remain smooth throughout the entire flame propagation process at a temperature of 390 K, pressure of 0.3 MPa, equivalence ratio of 1.3 and without hydrogen addition, but when the hydrogen addition increases from 0.0 to 0.5 under the same conditions, flaws and protuberances occur at the flame surfaces. It was also found that with the increase of the equivalence ratio from 0.9 to 1.5, the laminar burning velocities of the mixtures increase at first and then decrease, and the highest laminar burning velocity was measured at an equivalence ratio of 1.2. Meanwhile, with the increase of hydrogen addition, laminar burning velocities of H2/RP-3/air mixtures increase. However, the Markstein numbers of H2/RP-3/air mixtures decrease with the increase of hydrogen addition, which means that the flames of H2/RP-3/air mixtures become unstable with the increase of hydrogen addition.

Separation and recovery of high grade Dy2O3 by solvent extraction process with DEHPA in kerosene

International Nuclear Information System (INIS)

Mishra, S.L.; Thakur, N.V.; Koppiker, K.S.

1993-01-01

During the solvent extraction (SX) fractionation of rare earths chloride obtained from monazite, a heavy RE (HRE) fraction assaying 60% Y 2 O 3 is produced. This is purified further to 93% Y 2 O 3 by another SX cycle. During this step most of Dy and Tb get separated to yield a concentrate assaying >50% Dy 2 O 3 . An attempt has been made to process this Dy rich concentrate to obtain a high grade Dy 2 O 3 by a SX route using DEHPA in kerosene. The distribution data (D vs H i + ) of Dy have been generated experimentally at various metal concentrations and similar data for other metals present (Gd, Tb, Y, Er and Ho) have been derived using a mathematical expression developed in our laboratory. Based on this information mathematical models for extraction behaviour of these HRE have been derived and used in a computer program developed for multicomponent system. This program has been utilised to optimise the process parameters to obtain 95-97% pure Dy 2 O 3 at about 90% recovery. The parameters have been experimentally confirmed and Dy 2 O 3 95.5% pure w.r.t. Tb was obtained at about 90% recovery, thus confirming the validity of the program. This paper presents data obtained during these investigations. (author). 6 refs., 5 tabs

KONVERSI KATALITIK MINYAK SAWIT UNTUK MENGHASILKAN BIOFUEL MENGGUNAKAN SILIKA ALUMINA DAN HZSM-5 SINTESIS

Directory of Open Access Journals (Sweden)

Nurjannah Nurjannah

2012-02-01

Full Text Available Terbatasnya sumber energi fosil menyebabkan perlunya pengembangan energi terbarukan yang berasal dari alam dan dapat diperbaharui. Penggunaan bahan bakar minyak bumi, baik dari penggunaan berupa alat transportasi maupun dari penggunaan oleh industri sangat mencemari lingkungan karena tingkat polusi yang ditimbulkan sangat tinggi sehingga perlu mencari bahan bakar alternatif pengganti bahan bakar gasoline, solar, dan kerosene dari minyak nabati. Penelitian dilakukan dalam dua tahapan yaitu sintesa katalis dan proses katalitik cracking. Silika alumina disintesa menggunakan metode Latourette dan HZSM-5 disintesa menggunakan metode Plank. Hasil sintesa dikarakterisasi dengan Penyerapan Spektroskopi Atomis (AAS menunjukkan bahwa silika alumina dan HZSM-5 mempunyai Si/Al 198 dan 243. Luas permukaan  silika alumina dan HZSM-5 diperoleh dari analisa Brunauer Emmet Teller (BET yaitu 149,91-213,35 m2.g-1 dan ukuran pori rata-rata adalah 13oA. Perengkahan katalitik dilakukan dalam suatu mikroreaktor fixed bed pada temperatur 350-500°C dan laju alir gas N2 100-160 ml.min-1 selama 120 min. Hasil perengkahan dianalisa dengan metode gas kromatografi. Hasil yang diperoleh untuk katalis HZSM-5 fraksi gasoline dengan yield tertinggi 28,87%, kerosene 16,70%, dan diesel 12,20%  pada suhu reaktor 4500C dan laju gas N2 100 ml/menit.

Produksi Biofuel dari Minyak Kelapa Sawit dengan Katalis Au/HZSM-5 dan Kompositnya

Directory of Open Access Journals (Sweden)

Tillotama Anindita Sari

2012-09-01

diperoleh untuk katalis Au/HZSM-5 yield tertinggi kerosene 25,24%, gasoline 15,69% dan diesel 10,71% pada temperatur reaktor 500 °C dengan laju alir  gas N2 90 ml/min. Untuk katalis Komposit (HZSM-5/MCM-41 yield tertinggi diesel 26,53%, kerosene 19,26% dan gasoline 6,41% pada temperatur 450 °C laju alir 300 ml/min serta pada temperatur 350 °C dengan laju alir 90 ml/min dengan yield diesel tertinggi 24,38%, kerosene 18,84% dan gasoline 4,41%.

Household air pollution and chronic hypoxia in the placenta of pregnant Nigerian women: A randomized controlled ethanol Cookstove intervention.

Science.gov (United States)

Dutta, Anindita; Khramtsova, Galina; Brito, Katherine; Alexander, Donee; Mueller, Ariel; Chinthala, Sireesha; Adu, Damilola; Ibigbami, Tope; Olamijulo, John; Odetunde, Abayomi; Adigun, Kehinde; Pruitt, Liese; Hurley, Ian; Olopade, Olufunmilayo; Ojengbede, Oladosu; Rana, Sarosh; Olopade, Christopher O

2018-04-01

Household air pollution (HAP) is associated with adverse pregnancy outcomes. Investigate impact of in-utero HAP exposure on placental development and chronic hypoxia. Markers of chronic placental hypoxia [Hofbauer cells (HBC), syncytial knots (SK), chorionic vascular density (cVD) and hypoxia-inducible factor (HIF)] were stained by hematoxylin-eosin and/or immunohistochemically in placenta samples collected from firewood-/kerosene-users (A,n=16), and ethanol-users (B,n=20) that participated in a randomized controlled intervention trial in Ibadan, Nigeria. A third group of non-smoking and presumed natural gas-using Chicago women (C,n=12) were included in this exploratory pilot to assess for possible differences in placenta histology between similar racial groups. All patients had uncomplicated pregnancies and delivered at term. HBC, SK and cVD were significantly increased among firewood-/kerosene-users compared to ethanol-users and natural gas-using Chicago women (HBC medians 5.5, 3.5, and 2.0, respectively; SK means 55.6, 41.8 and 30.1; cVD means 8.8, 6.2, and 5.2; all pfirewood/kerosene-users compared to ethanol-users with less HAP exposure and Chicago women with no presumed HAP exposure. Presence of chronic hypoxic signature in placenta of women exposed to HAP has implications for adverse pregnancy complications and future growth and development of the young children. Future larger studies need to focus on HAP exposure and placental disorders like preeclampsia and long-term health impact of in-utero exposure to HAP. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

Assessment of DNA damage in blood lymphocytes of bakery workers by comet assay.

Science.gov (United States)

Kianmehr, Mojtaba; Hajavi, Jafar; Gazeri, Javad

2017-09-01

The comet assay is widely used in screening and identification of genotoxic effects of different substances on people in either their working or living environment. Exposure to fuel smoke leads to DNA damage and ultimately different types of cancer. Using a comet assay, the present study aimed to assess peripheral blood lymphocyte DNA damage in people working in bakeries using natural gas, kerosene, diesel, or firewood for fuel compared to those in the control group. The subjects of this study were 55 people in total who were divided into four experimental groups, each of which comprised of 11 members (based on the type of fuel used), and one control group comprised of 11 members. Using CometScore, the subjects' peripheral blood lymphocytes were examined for DNA damage. All bakers, that is, experimental subjects, showed significantly greater peripheral blood lymphocyte DNA damage compared to the individuals in the control group. There was greater peripheral blood lymphocyte DNA damage in bakers who had been using firewood for fuel compared to those using other types of fuel to such an extent that tail moments (µm) for firewood-burning bakers was 4.40 ± 1.98 versus 1.35 ± 0.84 for natural gas, 1.85 ± 1.33 for diesel, and 2.19 ± 2.20 for kerosene. The results indicated that burning firewood is the greatest inducer of peripheral blood lymphocytes DNA damage in bakers. Nonetheless, there was no significant difference in peripheral blood lymphocyte DNA damage among diesel and kerosene burning bakers.

Demand for woodfuels by households in the Province of Ilocos Norte, Philippines

Energy Technology Data Exchange (ETDEWEB)

Hyman, E

1985-12-01

This paper presents the results of a survey on woodfuel consumption conducted in the Province of Ilocos Norte, the Philippines. The survey examined household consumption of wood and other fuels such as coconut shells and husks, rice hulls and stems, bagasse, bamboo, animal dung, charcoal, kerosene, liquefied petroleum gas and electricity. The author describes the various pressures on the woodfuel supply in the province and patterns of consumption, collection and ways in which consumers are trying to compensate for their relatively high levels of fuelwood consumption by reafforestation and turning to other fuels. The author concludes with a number of policy options. These include an extensive tree planting program, the introduction of more fuel-efficient wood-stoves, and the increased substitution of other fuels such as bamboo or kerosene. 2 tables.

Model validation and parametric study of fluid flows and heat transfer of aviation kerosene with endothermic pyrolysis at supercritical pressure

Directory of Open Access Journals (Sweden)

Keke Xu

2015-12-01

Full Text Available The regenerative cooling technology is a promising approach for effective thermal protection of propulsion and power-generation systems. A mathematical model has been used to examine fluid flows and heat transfer of the aviation kerosene RP-3 with endothermic fuel pyrolysis at a supercritical pressure of 5 MPa. A pyrolytic reaction mechanism, which consists of 18 species and 24 elementary reactions, is incorporated to account for fuel pyrolysis. Detailed model validations are conducted against a series of experimental data, including fluid temperature, fuel conversion rate, various product yields, and chemical heat sink, fully verifying the accuracy and reliability of the model. Effects of fuel pyrolysis and inlet flow velocity on flow dynamics and heat transfer characteristics of RP-3 are investigated. Results reveal that the endothermic fuel pyrolysis significantly improves the heat transfer process in the high fluid temperature region. During the supercritical-pressure heat transfer process, the flow velocity significantly increases, caused by the drastic variations of thermophysical properties. Under all the tested conditions, the Nusselt number initially increases, consistent with the increased flow velocity, and then slightly decreases in the high fluid temperature region, mainly owing to the decreased heat absorption rate from the endothermic pyrolytic chemical reactions.

Conceptualizing urban household energy use: Climbing the 'Energy Services Ladder'

International Nuclear Information System (INIS)

Sovacool, Benjamin K.

2011-01-01

This article begins by defining energy services and identifying how they differ according to sector, urban and rural areas, and direct and indirect uses. It then investigates household energy services divided into three classes: lower income, middle income, and upper income. It finds that the primary energy technologies involved with low-income households involve a greater number of fuels and carriers, ranging from dung and fuelwood to liquefied petroleum gas and charcoal, but a fewer number of services. Middle-income households throughout the world tend to rely on electricity and natural gas, followed by coal, liquefied petroleum gas, and kerosene. These homes utilize energy to produce a much broader range services. The upper class or rich have access to the same energy fuels, carriers, and technologies as middle-income homes and families, but consume more energy (and more high luxury items). The study highlights how focusing on energy services reorients the direction of energy policy interventions, that energy services are neither uniform nor innate, and by noting exciting areas of potential research. - Research highlights: → The primary energy technologies involved with low-income households involve a greater number of fuels and carriers, ranging from dung and fuelwood to liquefied petroleum gas and charcoal, but a fewer number of services. → Middle-income households throughout the world tend to rely on electricity and natural gas, followed by coal, liquefied petroleum gas, and kerosene. These homes utilize energy to produce a much broader range services. → The upper class or rich have access to the same energy fuels, carriers, and technologies as middle-income homes and families, but consume more energy (and more high luxury items).

Conceptualizing urban household energy use: Climbing the 'Energy Services Ladder'

Energy Technology Data Exchange (ETDEWEB)

Sovacool, Benjamin K., E-mail: bsovacool@nus.edu.s [Centre on Asia and Globalisation, Lee Kuan Yew School of Public Policy, National University of Singapore, 469C Bukit Timah Road, Singapore 259772 (Singapore)

2011-03-15

This article begins by defining energy services and identifying how they differ according to sector, urban and rural areas, and direct and indirect uses. It then investigates household energy services divided into three classes: lower income, middle income, and upper income. It finds that the primary energy technologies involved with low-income households involve a greater number of fuels and carriers, ranging from dung and fuelwood to liquefied petroleum gas and charcoal, but a fewer number of services. Middle-income households throughout the world tend to rely on electricity and natural gas, followed by coal, liquefied petroleum gas, and kerosene. These homes utilize energy to produce a much broader range services. The upper class or rich have access to the same energy fuels, carriers, and technologies as middle-income homes and families, but consume more energy (and more high luxury items). The study highlights how focusing on energy services reorients the direction of energy policy interventions, that energy services are neither uniform nor innate, and by noting exciting areas of potential research. - Research highlights: {yields} The primary energy technologies involved with low-income households involve a greater number of fuels and carriers, ranging from dung and fuelwood to liquefied petroleum gas and charcoal, but a fewer number of services. {yields} Middle-income households throughout the world tend to rely on electricity and natural gas, followed by coal, liquefied petroleum gas, and kerosene. These homes utilize energy to produce a much broader range services. {yields} The upper class or rich have access to the same energy fuels, carriers, and technologies as middle-income homes and families, but consume more energy (and more high luxury items).

Polycyclic Aromatic Hydrocarbons in Fine Particulate Matter ...

Science.gov (United States)

This study measured polycyclic aromatic hydrocarbon (PAH) composition in particulate matter emissions from residential cookstoves. A variety of fuel and cookstove combinations were examined, including: (i) liquid petroleum gas (LPG), (ii) kerosene in a wick stove, (iii) wood (10% and 30% moisture content on a wet basis) in a forced-draft fan stove, and (iv) wood in a natural-draft rocket cookstove. LPG combustion had the highest thermal efficiency (~57%) and the lowest PAH emissions per unit fuel energy, resulting in the lowest PAH emissions per useful energy delivered (MJd). The average benzo[a]pyrene (B[a]P) emission factor for LPG was 0.842 µg/MJd; the emission rate was 0.043 µg/min. The highest PAH emissions were from wood burning in the natural-draft stove (209-700 µg B[a]P/MJd). PAH emissions from kerosene were significantly lower than those from the wood burning in the natural-draft cookstove, but higher than those from LPG. It is expected that in rural regions where LPG and kerosene are unavailable or unaffordable, the forced-draft fan stove may be an alternative because its emission factor (5.17-8.07 µg B[a]P/MJd) and emission rate (0.52-0.57 µg/min) are similar to kerosene (5.36 µg B[a]P/MJd and 0.45 µg/min). Compared with wood combustion emissions, LPG stoves emit less total PAH emissions and less fractions of high molecular weight PAHs. Relatively large variations in PAH emissions from LPG call for additional future tests to identify the major

Blogs, artefactos y política

Directory of Open Access Journals (Sweden)

María Belén Albornoz

2010-05-01

Full Text Available Este artículo problematiza la acepción de lo público en el espacio virtual que surge en la blogosfera política ecuatoriana en el contexto de la Asamblea Nacional Constituyente. A partir del análisis de la extensión de la política a los lugares virtuales, se aborda la blogosfera como proyecto político y la tecnología como formas de ordenamiento del mundo que la sociedad estabiliza. Se considera a la blogosfera política un espacio público regulado con la capacidad de ordenar y clasificar el mundo virtual por medio de dispositivos sociales, políticos y tecnológicos. Finalmente se propone el estudio del nuevo espacio público virtual desde un enfoque tecno-social que dé cuenta del entorno virtual como espacio formador de conductas.This article problematizes the acceptance of the public in the virtual space emerging in the Ecuadorian political blogosphere, in the context of the National Constitutional Assembly. Beginning with an analysis of the spread of politics to virtual spaces, the blogosphere is approached as a political project, and technology as ways of ordering the world that society stabilizes. The political blogosphere is taken to be a regulated public space with the ability to order and classify the virtual world by means of social, political and technological tools. Finally, the study of this new virtual public space from a techno-social focus is proposed, taking into account virtual surroundings as a space in which conducts are formed.

Multi-objective optimization of oxidative desulfurization in a sono-photochemical airlift reactor.

Science.gov (United States)

Behin, Jamshid; Farhadian, Negin

2017-09-01

Response surface methodology (RSM) was employed to optimize ultrasound/ultraviolet-assisted oxidative desulfurization in an airlift reactor. Ultrasonic waves were incorporated in a novel-geometry reactor to investigate the synergistic effects of sono-chemistry and enhanced gas-liquid mass transfer. Non-hydrotreated kerosene containing sulfur and aromatic compounds was chosen as a case study. Experimental runs were conducted based on a face-centered central composite design and analyzed using RSM. The effects of two categorical factors, i.e., ultrasound and ultraviolet irradiation and two numerical factors, i.e., superficial gas velocity and oxidation time were investigated on two responses, i.e., desulfurization and de-aromatization yields. Two-factor interaction (2FI) polynomial model was developed for the responses and the desirability function associate with overlay graphs was applied to find optimum conditions. The results showed enhancement in desulfurization ability corresponds to more reduction in aromatic content of kerosene in each combination. Based on desirability approach and certain criteria considered for desulfurization/de-aromatization, the optimal desulfurization and de-aromatization yields of 91.7% and 48% were obtained in US/UV/O 3 /H 2 O 2 combination, respectively. Copyright © 2017 Elsevier B.V. All rights reserved.

La perversa máquina del olvido: cómics y memoria de la posguerra en la España de los 90 = The perverse machine of oblivion: comics and postwar memory in 90’s Spain

Directory of Open Access Journals (Sweden)

Pedro Pérez del Solar

2015-06-01

Full Text Available Este artículo es un análisis de la novela gráfica El Artefacto Perverso (Felipe Hernández Cava y Federico del Barrio, 1996. Este estudio muestra cómo, aprovechando al máximo los recursos del cómic, esta obra construye una compleja y potente reflexión sobre la memoria, especialmente la de los derrotados en la guerra civil española (1936–39. El tema de la memoria está al centro de El Artefacto Perverso. Los personajes hablan sobre él, las tramas pasan por él. La trama principal, el nivel de «la realidad», está ambientada en el Madrid de la posguerra. Ahí, los que perdieron la guerra civil tratan de olvidar su pasado, luchando por sobrevivir en un silencio que la guerrilla lucha por quebrar. Alrededor de esta trama, emergen otras historias que dialogan entre ellas. Una narra los recuerdos de un refugiado republicano en Francia. Otra muestra a un personaje que, mientras agoniza, delira sobre la desaparición de los perdedores de la guerra de las páginas de la Historia. Finalmente está el tebeo dibujado por el protagonista, donde el «héroe español» Pedro Guzmán, salva al mundo de una terrible máquina que borra la memoria. El contacto con la trama principal, carga de significado crítico a esta ingenua historia. El estilo también habla sobre la memoria: los borrosos recuerdos del campo de refugiados y los relatos delirantes tienen, cada uno, su correspondiente representación gráfica. Las aventuras de Pedro Guzmán recuerdan los años de la posguerra, al emplear uno de los estilos más reconocibles de los tebeos de esos años. Todo esto tiene implicaciones sobre los años en que se publicó El Artefacto Perverso y sobre el presente. Este álbum fue publicado en los años en que el régimen democrático consolidaba un discurso que deliberadamente dejaba de lado el recuerdo (y, mucho más, la reflexión sobre la guerra civil y la posguerra. El Artefacto Perverso confronta decididamente esta postura. Desde

Gas chromatography-mass spectrometric determination of traces of ether-type icing inhibitors in free-floating fuels

Energy Technology Data Exchange (ETDEWEB)

Shin, H.S. [Dept. of Environmental Education, Kongju National Univ., Kongju (Korea); Abuse Drug Research Center, Kongju National Univ., Kongju (Korea); Ahn, H.S. [Dept. of Environmental Science, Kongju National Univ., Kongju (Korea)

2004-08-01

A gas chromatographic-mass spectrometric (GC-MS) assay method has been developed for simultaneous determination of ethylene glycol monomethyl ether (EGME) and diethylene glycol monomethly ether (DEGME) in spilled aviation fuels. Ethylene glycol monobutyl ether (EGBE) and ethylene glycol monoethyl ether (EGEE) were used as internal standard and surrogate, respectively. Sample preparation consisted of back-extraction with 7 mL dichloromethane after extraction of 50 mL of fuel with 2 mL of water. The extract was concentrated to dryness, dissolved in 100 {mu}L methanol, and analyzed by GC-MS with selected-ion monitoring (SIM). The peaks had good chromatographic properties on a semi-polar column. EGME and DEGME were extracted from fuel with high recovery of 75 and 85%, with small variations, respectively. Method detection limits were 1.3 and 1.0 ng mL{sup -1} for EGME and DEGME, respectively, in spilled fuel. DEGME was detected at concentrations of 22.6 and 19.7 ng mL{sup -1} in two samples from among five free-floating samples collected in a tunnel of a subway station located in the vicinity of an army base in Korea. The method might be useful for differentiation between the fuel-types kerosene and JP-8, which might originate from a storage tank. (orig.)

Implementing Monitored Natural Attenuation and Expediting Closure at Fuel-Release Sites

Science.gov (United States)

2004-08-01

gasoline, kerosene, diesel, and jet fuel (e.g., Jamison et al., 1975; Atlas , 1981, 1984, and 1988; Young, 1984; Bartha , 1986; Wilson et al., 1986 and...Supporting data. Gas Research Institute, Chicago, Illinois. Atlas , R. M. 1981. Microbial degradation of petroleum hydrocarbons - an Environmental... Microbial Ecology 12:155-172 Battelle. 1984. Chemical Attenuation Rates Coefficients, and Constants in Leachate Migration. Vol I: Critical Review

Indoor house pollution: appliance emissions and indoor ambient concentrations

Energy Technology Data Exchange (ETDEWEB)

Caceres, T [Univ. of Santiago, Chile; Soto, H; Lissi, E; Cisternas, R

1983-01-01

Emissions rates for CO, NO, NO/sub 2/ adn CH/sub 2/O from several unvented gas and kerosene heaters frequently employed in domestic heating have been measured. The indoor concentrations generated by these emissions are evaluated and compared to those determined in typical houses. It is found that both the predicted and measured values exceed the short term air quality standards accepted in most countries.

Pool fires in a large scale ventilation system

International Nuclear Information System (INIS)

Smith, P.R.; Leslie, I.H.; Gregory, W.S.; White, B.

1991-01-01

A series of pool fire experiments was carried out in the Large Scale Flow Facility of the Mechanical Engineering Department at New Mexico State University. The various experiments burned alcohol, hydraulic cutting oil, kerosene, and a mixture of kerosene and tributylphosphate. Gas temperature and wall temperature measurements as a function of time were made throughout the 23.3m 3 burn compartment and the ducts of the ventilation system. The mass of the smoke particulate deposited upon the ventilation system 0.61m x 0.61m high efficiency particulate air filter for the hydraulic oil, kerosene, and kerosene-tributylphosphate mixture fires was measured using an in situ null balance. Significant increases in filter resistance were observed for all three fuels for burning time periods ranging from 10 to 30 minutes. This was found to be highly dependent upon initial ventilation system flow rate, fuel type, and flow configuration. The experimental results were compared to simulated results predicted by the Los Alamos National Laboratory FIRAC computer code. In general, the experimental and the computer results were in reasonable agreement, despite the fact that the fire compartment for the experiments was an insulated steel tank with 0.32 cm walls, while the compartment model FIRIN of FIRAC assumes 0.31 m thick concrete walls. This difference in configuration apparently caused FIRAC to consistently underpredict the measured temperatures in the fire compartment. The predicted deposition of soot proved to be insensitive to ventilation system flow rate, but the measured values showed flow rate dependence. However, predicted soot deposition was of the same order of magnitude as measured soot deposition

Domestic energy-use pattern by the households: A comparison between rural and semi-urban areas of Noakhali in Bangladesh

International Nuclear Information System (INIS)

Miah, Md.Danesh; Foysal, Muhammad Abul; Koike, Masao; Kobayashi, Hajime

2011-01-01

An explorative survey was carried out on rural and semi-urban households to find out the energy consumption pattern with respect to socio-demographic and geographic factors in Bangladesh by using stratified random sampling technique. The study revealed that 100% of the households used biomass, 98% kerosene, 61% electricity, 23% LPG and 5% candle in the rural areas. In the semi-urban areas, 100% of the households used electricity, candle and natural gas, 60% kerosene and 13% petrol. Households' mean expenditure for total energy was US$ 5.34 (SE, 0.43) with total income US$ 209.84 (SE, 6.69) month -1 in the rural areas, while it was US$ 6.20 (SE, 1.35) in the semi-urban areas with the total income US$ 427.76 (SE, 24.19) month -1 . This study may be a useful baseline information to energy policy makers in Bangladesh. - Highlights: →The study provides an empirical analysis of household energy consumption. → Rural households are dominated by biomass energy. → Semi-urban households are dominated by standard commercial energy (natural gas and electricity).→ Monthly income, dwelling status and literacy of the households clearly influences energy use.→ The major energy use in the rural households is for the cooking purpose.

Domestic energy-use pattern by the households: A comparison between rural and semi-urban areas of Noakhali in Bangladesh

Energy Technology Data Exchange (ETDEWEB)

Miah, Md.Danesh, E-mail: danesh@cu.ac.bd [Institute of Forestry and Environmental Sciences, University of Chittagong, 4331 Chittagong (Bangladesh); Forest Policy Laboratory, Shinshu University, 8304 Minamiminowa-Mura, Kami Ina Gun, 399-4598 Nagano-ken (Japan); Foysal, Muhammad Abul [Institute of Forestry and Environmental Sciences, University of Chittagong, 4331 Chittagong (Bangladesh); Koike, Masao [Forest Policy Laboratory, Shinshu University, 8304 Minamiminowa-Mura, Kami Ina Gun, 399-4598 Nagano-ken (Japan); Kobayashi, Hajime [Laboratory of Forest Environment and Ecology, Faculty of Agriculture, Shinshu University, 8304 Minamiminowa-Mura, Kami Ina Gun, 399-4598 Nagano-ken (Japan)

2011-06-15

An explorative survey was carried out on rural and semi-urban households to find out the energy consumption pattern with respect to socio-demographic and geographic factors in Bangladesh by using stratified random sampling technique. The study revealed that 100% of the households used biomass, 98% kerosene, 61% electricity, 23% LPG and 5% candle in the rural areas. In the semi-urban areas, 100% of the households used electricity, candle and natural gas, 60% kerosene and 13% petrol. Households' mean expenditure for total energy was US$ 5.34 (SE, 0.43) with total income US$ 209.84 (SE, 6.69) month{sup -1} in the rural areas, while it was US$ 6.20 (SE, 1.35) in the semi-urban areas with the total income US$ 427.76 (SE, 24.19) month{sup -1}. This study may be a useful baseline information to energy policy makers in Bangladesh. - Highlights: >The study provides an empirical analysis of household energy consumption. > Rural households are dominated by biomass energy. > Semi-urban households are dominated by standard commercial energy (natural gas and electricity).> Monthly income, dwelling status and literacy of the households clearly influences energy use.> The major energy use in the rural households is for the cooking purpose.

Performance of a small-scale turbojet engine fed with traditional and alternative fuels

International Nuclear Information System (INIS)

Badami, M.; Nuccio, P.; Pastrone, D.; Signoretto, A.

2014-01-01

Highlights: • One synthetic fuel, one bio-fuel blend and one traditional kerosene were tested on a small-scale turbojet. • The three fuels were characterized and their chemical and physical specifications were compared. • The experimental results, in term of CO, UHC and NO x emissions, are discussed. • Emissions are compared with CFD analysis and semi-empirical equations found in literature. - Abstract: The growing use of aeronautical fuels, together with the increasing attention towards reduced environmental impact technologies, are driving governments and aeronautical companies to search for alternative aeronautical fuels to petroleum based kerosene. Analysis and measurements on real aeronautical turbines are complex and expensive; for this reason the use of parts of real engines or small size turbojets can be very interesting for research activities. The present paper describes the results of an experimental and numerical activity, regarding the influence of alternative fuels on the performance in term of emissions, on a small-scale turbojet engine with a nominal thrust of 80 N at 80,000 rpm. Three different fuels, a traditional Jet-A kerosene, a synthetic Gas To Liquid (GTL) fuel and a blend of 30% Jatropha Methyl Ester (JME) and 70% Jet-A, were tested. The experimental results, in term of CO, UHC and NO x emissions, are discussed and compared with results obtained from CFD analysis and from semi-empirical equations found in literature

Nonresidential buildings energy consumption survey: 1979 consumption and expenditures. Part 2. Steam, fuel oil, LPG, and all fuels

Energy Technology Data Exchange (ETDEWEB)

Patinkin, L.

1983-12-01

This report presents data on square footage and on total energy consumption and expenditures for commercial buildings in the contiguous United States. Also included are detailed consumption and expenditures tables for fuel oil or kerosene, liquid petroleum gas (LPG), and purchased steam. Commercial buildings include all nonresidential buildings with the exception of those where industrial activities occupy more of the total square footage than any other type of activity. 7 figures, 23 tables.

Additive Effectiveness Investigations in Alternative Fuels

Science.gov (United States)

2014-05-01

refers to synthetic paraffinic kerosene generated through the Fischer-Tropsch process. Basically, a carbon source (coal, natural gas, biomass ) is...four cobalt FT process SPKs in that report, two from SASOL and one each from Shell and Syntroleum. SwRI had a good supply of the Shell FT SPK and...guidance material [9] warns that continuous use could result in an incurable biomass accumulation. The active components of this product are a mixture

Development of a robust and compact kerosene–diesel reaction mechanism for diesel engines

International Nuclear Information System (INIS)

Tay, Kun Lin; Yang, Wenming; Mohan, Balaji; An, Hui; Zhou, Dezhi; Yu, Wenbin

2016-01-01

Highlights: • An approach is used to develop a robust kerosene–diesel reaction mechanism. • Ignition delay of the kerosene sub-mechanism is well validated with experiments. • The kerosene sub-mechanism reproduces the flame lift-off lengths of Jet-A reasonably well. • The kerosene sub-mechanism performs reasonably well under engine conditions. - Abstract: The use of kerosene fuels in internal combustion engines is getting more widespread. The North Atlantic Treaty Organization military is pushing for the use of a single fuel on the battlefield in order to reduce logistical issues. Moreover, in some countries, fuel adulteration is a serious matter where kerosene is blended with diesel and used in diesel engines. So far, most investigations done regarding the use of kerosene fuels in diesel engines are experimental and there is negligible simulation work done in this area possibly because of the lack of a robust and compact kerosene reaction mechanism. This work focuses on the development of a small but reliable kerosene–diesel reaction mechanism, suitable to be used for diesel engine simulations. The new kerosene–diesel reaction mechanism consists only of 48 species and 152 reactions. Furthermore, the kerosene sub-mechanism in this new mechanism is well validated for its ignition delay times and has proven to replicate kerosene combustion well in a constant volume combustion chamber and an optical engine. Overall, this new kerosene–diesel reaction mechanism is proven to be robust and practical for diesel engine simulations.

PENGEMBANGAN ENERGI TERBARUKAN MELALUI EVALUASI PROGRAM KONVERSI MINYAK TANAH KE LPG DI PULAU GILI RAJA-SUMENEP (Developing Renewable Energy Through An Evaluation for A Program of Kerosene Conversion to LPG in Gili Raja Island - Sumenep

Directory of Open Access Journals (Sweden)

Nian Riawati

2014-10-01

Full Text Available ABSTRAK Penelitian ini mengevaluasi program konversi minyak tanah ke Liquefied Petroleum Gas (LPG pada kelompok sasaran di pulau Gili Raja kabupaten Sumenep Jawa Timur. Kajian sebelumnya terhadap program ini masih bersifat formatif dengan fokus efisiensi dan efektivitas implementasi. Dengan menggunakan metode Minimum Evaluation Procedure (MEP penelitian ini mempertanyakan implementasi program secara runtut, mulai output, outcome sampai impact. Melalui pendekatan kualitatif penelitian ini dapat mendeskripsikan konteks dan setting secara alamiah. Hasil penelitian menunjukkan adanya pungutan dalam proses distribusi paket program, rendahnya akses atau penggunaan paket program serta tidak adanya dampak program. Selain itu, ditemukan adanya potensi lokal berupa kotoran ternak yang dapat dikembangkan menjadi sumber daya energi terbarukan. Berdasarkan hal itu, disarankan sebuah program dapat dikembangkan secara asimetris sesuai dengan kondisi lokasi dan kelompok sasaran, terjadinya komunikasi intensif antara pelaksana program dengan kelompok sasaran serta stakeholders lainnya. Berdasarkan potensi kelompok sasaran di pulau Gili Raja, hendaknya dikembangkan kebijakan energi alternatif biogas untuk memenuhi kebutuhan energi masyarakat serta mendukung pencapaian tujuan kebijakan energi nasional.   ABSTRACT The purpose of this research is to evaluate the conversion programfrom kerosene to Liquefied Petroleum Gas (LPG on a target group in Gili Raja island of SumenepMunicipal, East Java. Previous study on this program was quite formative one and focusing on the efficiency and the effectiveness of the program implementation. In addition, by applying Minimum Evaluation Procedure’s (MEP method, this research questioned the implementation of the program consecutively from the output, the outcome as well as the impact. Furthermore, through a qualitative approach, this research will be able to describe context and setting naturally. Result of the research shows

The atomization and burning of biofuels in the combustion chambers of gas turbine engines

Science.gov (United States)

Maiorova, A. I.; Vasil'ev, A. Yu; Sviridenkov, A. A.; Chelebyan, O. G.

2017-11-01

The present work analyzes the effect of physical properties of liquid fuels with high viscosity (including biofuels) on the spray and burning characteristics. The study showed that the spray characteristics behind devices well atomized fuel oil, may significantly deteriorate when using biofuels, until the collapse of the fuel bubble. To avoid this phenomenon it is necessary to carry out the calculation of the fuel film form when designing the nozzles. As a result of this calculation boundary curves in the coordinates of the Reynolds number on fuel - the Laplace number are built, characterizing the transition from sheet breakup to spraying. It is shown that these curves are described by a power function with the same exponent for nozzles of various designs. The swirl of air surrounding the nozzle in the same direction, as the swirl of fuel film, can significantly improve the performance of atomization of highly viscous fuel. Moreover the value of the tangential air velocity has the determining influence on the film shape. For carrying out of hot tests in aviation combustor some embodiments of liquid fuels were proved and the most preferred one was chosen. Fire tests of combustion chamber compartment at conventional fuel has shown comprehensible characteristics, in particular wide side-altars of the stable combustion. The blended biofuel application makes worse combustion stability in comparison with kerosene. A number of measures was recommended to modernize the conventional combustors when using biofuels in gas turbine engines.

Nuevas resistencias comunicativas: la rebelión de los ACARP

Directory of Open Access Journals (Sweden)

IA Del Amo

2014-05-01

Full Text Available Introducción. El trabajo pretende ser una aportación en el debate en torno al papel que los medios de comunicación tienen en el cultivo de asunciones sobre la realidad, especialmente a raíz de la emergencia de las nuevas tecnologías de la información y la comunicación (TICs. Objetivos. Se analizarán dos formas específicas y novedosas de disputa comunicativa por parte de los movimientos sociales: los lip dub reivindicativos y las grabaciones ciudadanas de actuaciones policiales. Englobamos a ambas bajo la categoría de Artefacto Cultural Audiovisual de Reivindicación y Protesta (ACARP. Metodología. Se realiza un análisis teórico acerca de las relaciones entre poder, comunicación y resistencias, proponiendo una lectura acerca de los distintos planos en los que resistencias y disputas se articulan. Para el análisis empírico, atendemos a las reflexiones metodológicas en torno a la sociología visual, aplicándolas a seis de estos artefactos audiovisuales en el contexto vasco. Resultados y conclusiones. Los resultados proporcionan una caracterización general de estos artefactos audiovisuales. El análisis del caso vasco permite situar estas innovaciones tácticas y comunicativas, y discutir acerca de la importancia del contexto, la construcción del discurso, las posibles tendencias a la espectacularización y las posibilidades de contrarrestrar estereotipaciones.

Carbon monoxide poisoning - Immediate diagnosis and treatment are crucial to avoid complications.

Energy Technology Data Exchange (ETDEWEB)

Rosenthal, L.D. [Case Western Reserve University, Cleveland, OH (United States)

2006-03-15

Carbon monoxide is an odorless, colorless, tasteless gas produced by the incomplete combustion of carbon-containing fuels (oil, kerosene, coal, wood) or the inadequate ventilation of natural gas. When carbon monoxide is introduced into the bloodstream, it binds to hemoglobin, reducing the number of binding sites available for oxygen. Carbon monoxide also changes the structure of the hemoglobin molecule, which makes it even more difficult for oxygen that has attached to be released into tissues. The resulting tissue ischemia can lead to organ failure, permanent changes in cognition, or death. Carbon monoxide poisoning is the leading cause of death by poisoning in industrialized countries.

Two practical incineration-alternative prototype demonstrations for TSCA and RCRA wastes

International Nuclear Information System (INIS)

Coogan, J.J.; Kang, M.; Rosocha, L.A.; Tennant, R.A.; Cage, M.R.; Gill, J.T.

1994-01-01

Results from two pilot-scale demonstrations will be presented. The first was performed at the DOE's Savannah River Site where a trailer mounted silent discharge plasma (SDP) system was used to destroy hazardous compounds from the off-gas stream of a soil vapor extraction system. In the second, pilot-plant tests of a two-stage, combined packed-bed silent discharge plasma (PBR/SDP) treatment process were performed for PCB surrogates contained in both kerosene and hydraulic fluid

Temperature and Concentration Traces of Spray Flows During Motion in a Flame

Directory of Open Access Journals (Sweden)

Antonov Dmitry V.

2016-01-01

Full Text Available Heat and mass transfer models are developed on the base of experimental data and using Ansys Fluent software. These models allow prediction of the temperature and concentration traces of droplets. Transfer mechanisms of water droplets from different flames of flammable liquid (ethanol, kerosene И benzine with temperature gases 450–850 К are analyzed. The paper considers aerosol flows with droplets sizes of 0.04–0.4 mm and concentration of 3.8·10-5 –10.3·10-5 m3 of droplets/m3 of gas. The maximum gas temperature reduction in the trace of a moving liquid is ranged from 850 K to 600 K. The times of keeping the low temperature of the gas-vapor mixture in the droplets trace are from 13 s to 25 s relative to the initial gas temperature.

Gas and Gas Pains

Science.gov (United States)

... to produce gas. Often, relatively simple changes in eating habits can lessen bothersome gas. Certain digestive system disorders, ... such as soda and beer, increase stomach gas. Eating habits, such as eating too quickly, drinking through a ...

Gas, gas, gas... discoveries and developments booming worldwide

International Nuclear Information System (INIS)

Maxwell, F.

2000-01-01

Deep water exploration is yielding more than billion barrel oil fields. Unocal's 3 May discovery of 2-3 Tcf of gas in its Kutei block of Indonesia marks the first major discovery of natural gas in the deep water frontier: Wildcats Gula and Gada were drilled in over 1800 m of water as part of an aggressive search for gas instigated by Unocal last year. The author makes a survey of gas exploration and development throughout the world. (author)

Requirements for gas quality and gas appliances

NARCIS (Netherlands)

Levinsky, Howard; Gersen, Sander; Kiewiet, Bert

2015-01-01

Introduction The gas transmission network in the Netherlands transports two different qualities of gas, low-calorific gas known as G-gas or L-gas and, high calorific gas (H-gas). These two gas qualities are transported in separate networks, and are connected by means of five blending and conversion

Fires in large scale ventilation systems

International Nuclear Information System (INIS)

Gregory, W.S.; Martin, R.A.; White, B.W.; Nichols, B.D.; Smith, P.R.; Leslie, I.H.; Fenton, D.L.; Gunaji, M.V.; Blythe, J.P.

1991-01-01

This paper summarizes the experience gained simulating fires in large scale ventilation systems patterned after ventilation systems found in nuclear fuel cycle facilities. The series of experiments discussed included: (1) combustion aerosol loading of 0.61x0.61 m HEPA filters with the combustion products of two organic fuels, polystyrene and polymethylemethacrylate; (2) gas dynamic and heat transport through a large scale ventilation system consisting of a 0.61x0.61 m duct 90 m in length, with dampers, HEPA filters, blowers, etc.; (3) gas dynamic and simultaneous transport of heat and solid particulate (consisting of glass beads with a mean aerodynamic diameter of 10μ) through the large scale ventilation system; and (4) the transport of heat and soot, generated by kerosene pool fires, through the large scale ventilation system. The FIRAC computer code, designed to predict fire-induced transients in nuclear fuel cycle facility ventilation systems, was used to predict the results of experiments (2) through (4). In general, the results of the predictions were satisfactory. The code predictions for the gas dynamics, heat transport, and particulate transport and deposition were within 10% of the experimentally measured values. However, the code was less successful in predicting the amount of soot generation from kerosene pool fires, probably due to the fire module of the code being a one-dimensional zone model. The experiments revealed a complicated three-dimensional combustion pattern within the fire room of the ventilation system. Further refinement of the fire module within FIRAC is needed. (orig.)

What factors play a role in preventing self-immolation?Results from a case-control study in Iran

Directory of Open Access Journals (Sweden)

Hosein Karim

2015-07-01

Full Text Available Abstract: Background: To investigate factors related to prevention of self-immolation in west of Iran. Methods: In a case-control study, 30 consecutive cases of deliberate self-inflicted burns admitted to the regional burn center (Imam Khomeini hospital in Kermanshah province, Iran were compared with controls selected from the community and matched by sex, age,district-county of residence, and rural vs urban living environment. The following characteristics relevant to preventing self immolation were collected from all cases and controls: main domestic fuel used in the household, awareness about complications of burn injuries, and use of counseling services. Results: Descriptive analyses revealed that kerosene was the main domestic fuel in the household for 83% of cases. Not surprisingly, the main means of self-immolation in 93% of the patients was kerosene, with other fuels such as petrol and domestic gas used in remaining cases. The majority of cases and controls were aware of the potential complications of burn injuries. Use of counseling services was more common in controls. Conclusions: All three aspects of preventing self-immolation – having kerosene and other fuels in the home, being aware of the complications of burn injuries, and using counseling services were present in both the cases and controls. This suggests a large portion of residents in rural Iran are potential self-immolation victims. Increasing preventive strategies may reduce risk of suicide by self-immolation.

Las Texturas del Silencio: Violencia, Memoria y los Límites del Quehacer Antropológico

Directory of Open Access Journals (Sweden)

ALEJANDRO CASTILLEJO CUELLAR

2005-01-01

y las voces que las tratan de articular son convertidas en mercancías de consumo masivo dentro de nichos concretos como los académicos. En este sentido se podría pensar que el silencio es un artefacto histórico.

Estimating short and long-term residential demand for electricity. New evidence from Sri Lanka

International Nuclear Information System (INIS)

Athukorala, P.P.A Wasantha; Wilson, Clevo

2010-01-01

This study investigates the short-run dynamics and long-run equilibrium relationship between residential electricity demand and factors influencing demand - per capita income, price of electricity, price of kerosene oil and price of liquefied petroleum gas - using annual data for Sri Lanka for the period, 1960-2007. The study uses unit root, cointegration and error-correction models. The long-run demand elasticities of income, own price and price of kerosene oil (substitute) were estimated to be 0.78, - 0.62, and 0.14 respectively. The short-run elasticities for the same variables were estimated to be 0.32, - 0.16 and 0.10 respectively. Liquefied petroleum (LP) gas is a substitute for electricity only in the short-run with an elasticity of 0.09. The main findings of the paper support the following (1) increasing the price of electricity is not the most effective tool to reduce electricity consumption (2) existing subsidies on electricity consumption can be removed without reducing government revenue (3) the long-run income elasticity of demand shows that any future increase in household incomes is likely to significantly increase the demand for electricity and (4) any power generation plans which consider only current per capita consumption and population growth should be revised taking into account the potential future income increases in order to avoid power shortages in the country. (author)

Energy. Sector 1

International Nuclear Information System (INIS)

1994-01-01

The aim of this article is to report the results of the greenhouse gas (GHG) emission inventory for the year 1994. The following GHG are of interest in the energy sector: Carbon dioxide CO 2 , methane CH 4 , nitrous oxide N 2 O, oxides of nitrogen NO x , carbon monoxide CO, sulphur dioxide SO 2 and non-methane volatile organic compounds (NMVOCs). The inventory has focused on the following GHG related sources: -Electricity generation through the electric utility. -Private generation of electricity -Manufacturing industries and construction -Transport: road, domestic aviation and national navigation -Energy use in the residential sector -Energy use in the commercial/institutional sector -Energy use in the agriculture/forestry/fishing sector The fuel types taken into consideration are:Gasoline, jet Kerosene, Kerosene for household use, gas oil, diesel oil, fuel oil, LPG, lubricating oil, coal, wood and charcoal (solid biomass). Care has been taken to eliminate the fuel used by international marine and aviation bunkers from the national inventory. The amount of GHG released to the atmosphere has been estimated using the IPCC methodology and emission factors .Where national emission factors differed from those of IPCC, the factors are discussed. Complete documentation of compiled information and data sources are attached to this article.Finally both the reference approach and analysis by source categories have been carried out and are reported in this inventory

Estimating short and long-term residential demand for electricity. New evidence from Sri Lanka

Energy Technology Data Exchange (ETDEWEB)

Athukorala, P.P.A Wasantha; Wilson, Clevo [School of Economics and Finance, Queensland University of Technology, Brisbane (Australia)

2010-09-15

This study investigates the short-run dynamics and long-run equilibrium relationship between residential electricity demand and factors influencing demand - per capita income, price of electricity, price of kerosene oil and price of liquefied petroleum gas - using annual data for Sri Lanka for the period, 1960-2007. The study uses unit root, cointegration and error-correction models. The long-run demand elasticities of income, own price and price of kerosene oil (substitute) were estimated to be 0.78, - 0.62, and 0.14 respectively. The short-run elasticities for the same variables were estimated to be 0.32, - 0.16 and 0.10 respectively. Liquefied petroleum (LP) gas is a substitute for electricity only in the short-run with an elasticity of 0.09. The main findings of the paper support the following (1) increasing the price of electricity is not the most effective tool to reduce electricity consumption (2) existing subsidies on electricity consumption can be removed without reducing government revenue (3) the long-run income elasticity of demand shows that any future increase in household incomes is likely to significantly increase the demand for electricity and (4) any power generation plans which consider only current per capita consumption and population growth should be revised taking into account the potential future income increases in order to avoid power shortages in the country. (author)

Household energy use in urban Venezuela: Implications from surveys in Maracaibo, Valencia, Merida, and Barcelona-Puerto La Cruz

Energy Technology Data Exchange (ETDEWEB)

Figueroa, M.J.; Sathaye, J.

1993-08-01

This report identifies the most important results of a comparative analysis of household commercial energy use in Venezuelan urban cities. The use of modern fuels is widespread among all cities. Cooking consumes the largest share of urban household energy use. The survey documents no use of biomass and a negligible use of kerosene for cooking. LPG, natural gas, and kerosene are the main fuels available. LPG is the fuel choice of low-income households in all cities except Maracaibo, where 40% of all households use natural gas. Electricity consumption in Venezuela`s urban households is remarkably high compared with the levels used in households in comparable Latin American countries and in households of industrialized nations which confront harsher climatic conditions and, therefore, use electricity for water and space heating. The penetration of appliances in Venezuela`s urban households is very high. The appliances available on the market are inefficient, and there are inefficient patterns of energy use among the population. Climate conditions and the urban built form all play important roles in determining the high level of energy consumption in Venezuelan urban households. It is important to acknowledge the opportunities for introducing energy efficiency and conservation in Venezuela`s residential sector, particularly given current economic and financial constraints, which may hamper the future provision of energy services.

A comparative study of gas-gas miscibility processes in underground gas storage reservoirs

Energy Technology Data Exchange (ETDEWEB)

Rafiee, M.M.; Schmitz, S. [DBI - Gastechnologisches Institut gGmbH, Freiberg (Germany)

2013-08-01

Intermixture of gases in underground gas reservoirs have had great weight for natural gas storage in UGS projects with substitution of cushion gas by inert gases or changing the stored gas quality or origin, as for the replacement of town gas by natural gas. It was also investigated during the last years for Enhanced Gas Recovery (EGR) and Carbon Capture and Storage (CCS) projects. The actual importance of its mechanisms is discussed for the H{sub 2} storage in Power to Gas to Power projects (PGP). In these approaches miscibility of the injected gas with the gas in place in the reservoir plays an important role in the displacement process. The conditions and parameters for the gas-gas displacement and mixing have been investigated in previous projects, as e.g. the miscibility of CO{sub 2} with natural gas (CLEAN). Furthermore the miscibility process of town gas with natural gas and sauer gas with sweet gas were also previously measured and compared in laboratory. The objective of this work is to investigate the miscibility of H{sub 2} injection into natural gas reservoirs using a compositional and a black oil reservoir simulator. Three processes of convection, dispersion and diffusion are considered precisely. The effect of gas miscibility is studied for both simulators and the results are compared to find optimum miscibility parameters. The findings of this work could be helpful for further pilot and field case studies to predict and monitor the changes in gas composition and quality. In future this monitoring might become more important when PGP together with H{sub 2}-UGS, as storage technology, will help to successfully implement the change to an energy supply from more renewable sources. Similarly the method confirms the use of the black oil simulator as an alternative for gas-gas displacement and sequestration reservoir simulation in comparison to the compositional simulator. (orig.)

British Gas plans global gas unit expansion

International Nuclear Information System (INIS)

Vielvoye, R.

1991-01-01

This paper reports on developing a global gas business, a British Gas plc's strategy for evolving a state owned U.K. gas company to a privatized worldwide oil and gas giant. By 2000, BG's global gas business is expected to provide 20% of its revenues, compared with 40% each from its exploration and production operations and its U.K. gas business. The global gas unit (GGU) plans to meet its targets mainly through acquiring holdings in gas transmission and distribution companies around the world. In the 12 months since GGU was established, it has made two such major acquisitions in this area. BG acquired Consumers Gas Co., Ltd., Ontario, Canada's biggest natural gas distribution company, for $943.5 million. It also took a 10% stake in Catalana de Gas SA, Barcelona, the largest privately owned gas utility in Spain and in terms of number of customers, the fourth largest in western Europe. BG also is targeting additional revenues from developing gas fired cogeneration systems in developing countries with gas reserves but no established transmission and distribution systems

Histopathology of the organs of Broiler Chickens exposed to flames ...

African Journals Online (AJOL)

Histopathology of the organs of broiler chickens exposed to the flame and fumes of refined petroleum product kerosene at varying distances over a period of 16hrs daily for 56 days in a poultry house were evaluated. Kerosene burning was simulated in a designed burner. Kerosene flame in a designed burner was placed 4, ...

Life-cycle greenhouse gas emissions of shale gas, natural gas, coal, and petroleum.

Science.gov (United States)

Burnham, Andrew; Han, Jeongwoo; Clark, Corrie E; Wang, Michael; Dunn, Jennifer B; Palou-Rivera, Ignasi

2012-01-17

The technologies and practices that have enabled the recent boom in shale gas production have also brought attention to the environmental impacts of its use. It has been debated whether the fugitive methane emissions during natural gas production and transmission outweigh the lower carbon dioxide emissions during combustion when compared to coal and petroleum. Using the current state of knowledge of methane emissions from shale gas, conventional natural gas, coal, and petroleum, we estimated up-to-date life-cycle greenhouse gas emissions. In addition, we developed distribution functions for key parameters in each pathway to examine uncertainty and identify data gaps such as methane emissions from shale gas well completions and conventional natural gas liquid unloadings that need to be further addressed. Our base case results show that shale gas life-cycle emissions are 6% lower than conventional natural gas, 23% lower than gasoline, and 33% lower than coal. However, the range in values for shale and conventional gas overlap, so there is a statistical uncertainty whether shale gas emissions are indeed lower than conventional gas. Moreover, this life-cycle analysis, among other work in this area, provides insight on critical stages that the natural gas industry and government agencies can work together on to reduce the greenhouse gas footprint of natural gas.

Origin of natural gas; Tennen gas no kigen

Energy Technology Data Exchange (ETDEWEB)

Katayama, Y. [The Institute of Applied Energy, Tokyo (Japan)

1996-03-20

Natural gas, which is a general term of flammable hydrocarbon gases such as methane, is classified by origin into the following categories : (1) oil field gas (oil gas), (2) aquifers (bacteria-fermented methane), (3) coal gas (coal field gas), and (4) abiogenetic gas. The natural gas which has (1-4) origins and is now used as resource in a large quantity is (1) oil field gas. This gas is a hydrocarbon gas recovered in the production process of petroleum and contains components such as ethane, propane and butane. To the contrary, (2) aquifers and (3) coal gas have methane as main component. As (4) abiogenetic methane, there are gas formed in inorganic reaction in activities of submarine volcanos and deep gas (earth origin gas). Oil field gas has kerogen origin. Aquifers were formed by fermentation of organic matters. Coal gas was formed by coalification of vitrinite. As abiogenetic methane, there are inorganic reaction formation gas and deep gas, the latter of which exists little as resource. 7 refs., 11 figs., 1 tab.

Kerosene poisoning

Science.gov (United States)

... if known) Time it was swallowed Amount swallowed Poison Control Your local poison center can be reached directly by calling the national toll-free Poison Help hotline (1-800-222-1222) from anywhere ...

Papers of a Canadian Institute conference : Unconventional gas symposium : Tight gas, gas shales, coalbed methane, gas hydrates

International Nuclear Information System (INIS)

2003-01-01

This symposium provided an opportunity for participants to learn from gas industry leaders in both Canada and the United States, different strategies to cost-effectively develop unconventional gas resources. In particular, the representative from EnCana Corporation discussed the results of tight gas drilling in Northeastern British Columbia. The speaker for MGV Energy reported on the outcome of test drilling for coalbed methane (CBM) in Southern Alberta. The economic development of tight gas reservoirs in the United States Permian Basin was discussed by the speaker representing BP America Production Company. The role of unconventional gas in the North American natural gas supply and demand picture was dealt with by TransCanada PipeLines Limited and Canadian Gas Potential Committee. The trend for natural gas prices in North America was examined by Conoco Inc. The Geological Survey of Canada addressed the issue of gas hydrate potential in the Mackenzie Delta Mallik Field. In addition, one presentation by El Paso Production Company discussed the successful drilling for deep, tight gas and CBM in the United States. There were nine presentations at this symposium, of which three were indexed separately for inclusion in this database. refs., tabs., figs

Cell-mediated immune suppression effect of rocket kerosene through dermal exposure in mice

Directory of Open Access Journals (Sweden)

Bing-xin XU

2015-10-01

Full Text Available Objective　To study the effect of cell-mediated immune suppression effect of rocket kerosene (RK through dermal application in mice. Methods　Skin delayed type hypersensitivity (DTH was used to observe the relation of the RK amount the skin exposed and the cellular immune inhibitory function. Different amount of the undiluted fuel was smeared directly onto the dorsal skin of mice. Mice in negative and positive control groups were treated with acetone. After the last exposure, all the mice except those in negative control group were allergized by evenly smearing with 1% dinitrofluorobenzene (DNFB solution on their dorsum. Five days after allergy, 1% DNFB solution was smeared onto right ear of all mice to stimulate the allergic reaction. Twenty-four hours after attack, the auricle swelling, spleen index and thymus index in corresponding mice were determined. In the first series of experiments, different dosages of RK were applied once, and the ICR mice were randomly divided into negative control group, positive control group and experimental group (0.5ml/kg.BW×1, 1ml/kg.BW×1 and 2ml/kg.BW×1 group. In the second series of experiments, the certain and same dosage of RK was applied for different times, and the ICR mice were randomly divided into negative control group, positive control group and experimental group (0.5ml/kg.BW×1, 0.5mL/kg.BW×2, 0.5ml/kg.BW×3, 0.5ml/kg.BW×4 and 0.5mL/kg.BW×5 group. In the third series of experiments, the different dosages of RK were applied more than once, and the ICR mice were randomly divided into negative control group, positive control group and experimental group (0.5ml/kg.BW×5, 1ml/kg.BW×5 and 2ml/kg.BW×5 group. Lymphocyte proliferation experiment in vitrowas conducted to observe the persistent time of the cell-mediated immune suppression in mice by RK dermal exposure. The lymphocyte proliferation induced by concanavalin A (Con A was analyzed by MTT assay, and T lymphocyte subsets (CD3+, CD4+ and CD

Gas-on-gas competition in Shanghai

International Nuclear Information System (INIS)

Manuhutu, Chassty; Owen, Anthony D.

2010-01-01

In common with other major economic centres in China, Shanghai's energy consumption has been increasing rapidly to support the high growth rate of its economy. To achieve rational, efficient and clean use of energy, together with improved environmental quality within the city, the Shanghai municipal government has decided to expand the supply and utilization of natural gas. Shanghai plans to increase the share of natural gas in its primary energy mix to 7 per cent by 2010, up from 3 per cent in 2005. This increase in natural gas demand has to be matched with a corresponding increase in supply. To date, the Shanghai region has relied on offshore extracted natural gas but this supply is limited due to the size of the reserves. Since 2005, the West-East pipeline has provided an alternative for Shanghai but demands from other regions could reduce the potential for expanding supplies from that source. Since domestic production will not be sufficient to meet demand in the near future, Shanghai is building a liquefied natural gas (LNG) regasification terminal at the Yangshan deep-water port that would allow an additional supply of more than 3 billion cubic meters per year of natural gas. Malaysia has already committed to supply LNG to the Shanghai terminal at a price that is significantly higher than the wholesale 'city-gate' price for natural gas transported via pipeline, but still lower than the gas price to end-use consumers. The presence of both an LNG terminal and a transmission pipeline that connects Shanghai to domestic gas-producing regions will create gas-on-gas competition. This study assesses the benefits of introducing such competition to one of China's most advanced cities under various scenarios for demand growth. In this paper, the impact of imported LNG on market concentration in Shanghai's gas market will be analysed using the Herfindahl-Hirschmann index (HHI) and the residual supply index (RSI). Our results show that Shanghai remains a supply

Influencia de la Compresión del Rango Dinámico en la Evaluación de Calidad de Grabaciones Musicales

DEFF Research Database (Denmark)

Borup, Matias Bødker; Zabbal, Paul; Ordoñez, Rodrigo

2014-01-01

menor rango dinámico que las versiones anteriores. En el presente estudio, grabaciones musicales fueron procesadas con niveles distintos de compresión y luego evaluadas subjetivamente en relación a su profundidad, claridad, presencia de ruidos molestos o artefactos sonoros, calidad y preferencia. El...

Reducing the greenhouse gas footprint of shale gas

International Nuclear Information System (INIS)

Wang Jinsheng; Ryan, David; Anthony, Edward J.

2011-01-01

Shale gas is viewed by many as a global energy game-changer. However, serious concerns exist that shale gas generates more greenhouse gas emissions than does coal. In this work the related published data are reviewed and a reassessment is made. It is shown that the greenhouse gas effect of shale gas is less than that of coal over long term if the higher power generation efficiency of shale gas is taken into account. In short term, the greenhouse gas effect of shale gas can be lowered to the level of that of coal if methane emissions are kept low using existing technologies. Further reducing the greenhouse gas effect of shale gas by storing CO 2 in depleted shale gas reservoirs is also discussed, with the conclusion that more CO 2 than the equivalent CO 2 emitted by the extracted shale gas could be stored in the reservoirs at significantly reduced cost. - Highlights: ► The long-term greenhouse gas footprint of shale gas is smaller than that of coal. ► Carbon capture and storage should be considered for fossil fuels including shale gas. ► Depleted shale gas fields could store more CO 2 than the equivalent emissions. ► Linking shale gas development with CO 2 storage could largely reduce the total cost.

ARTEFACTOS DE USO DIARIO REPRESENTADOS EN LA COLECCIÓN CERÁMICA DEL ARROYO LEYES: SU EMPLEO EN LA DETERMINACIÓN DE CRONOLOGÍA / Daily use artifacts represented in the Arroyo de Leyes pottery collection: their use in the determination of chronology

Directory of Open Access Journals (Sweden)

Carlos Natalio Ceruti

2014-12-01

Full Text Available Se analizan artefactos de uso diario (implementos para mate, una alcancía, un vaso de cuerno y una “canasta” para el juego del pato representados en la colección cerámica del sitio Los Zapallos, sobre el Arroyo Leyes (departamento Garay, provincia de Santa Fe, Argentina. Se describen los elementos, localizados en un contexto considerado prima facie como obra de individuos esclavizados pertenecientes a vecinos de Santa Fe la Vieja (siglo XVII; pero que también puede contener materiales correspondientes a las culturas indígenas contemporáneas o anteriores a la conquista; a los siglos XVIII-XIX, y “falsificaciones” de comienzos del siglo XX. Se intenta ubicar cada uno de ellos en la escala temporal a partir del análisis de pasta y decoración de la pieza, y de la consistencia argumental derivada de la documentación escrita.   Palabras clave: Arroyo Leyes, arqueología de la esclavitud, Santa Fe la Vieja, cronología Daily use artifacts represented in the Arroyo de Leyes pottery collection: their use in the determination of chronology Abstract The presence of daily-use artifacts (implements for mate infusion, a money box, a horn cup and a “basket” used for the duck game represented in the ceramic collection of Los Zapallos site, Arroyo Leyes (Garay Department, Santa Fe Province, Argentina is analyzed. In this paper different elements are described, placed in a context considered in prima facie as resulting from the labor of enslaved individuals belonging to neighbors of Santa Fe la Vieja (XVIIth century, but that also may contain materials corresponding to contemporary or pre-conquest native cultures, to XVIII-XIXth centuries, and to “falsifications” of the early XXth century. On the basis of paste and piece decoration, and of argumental consistency derived from written documents, an attempt to place each element on the time scale is made. Keywords: Arroyo Leyes, archaeology of slavery, Santa Fe la Vieja, chronology

Towards an agro-ecological village at the Flora Community : reducing greenhouse gas emissions through organic based farming and energy self reliance

Energy Technology Data Exchange (ETDEWEB)

Samson, R.; Mulkins, L. [Resource Efficient Agricultural Production-Canada, Ste. Anne de Bellevue, PQ (Canada); Amongo, L.; Yap, E. [MASIPAG, Los Banos, Laguna (Philippines); Mendoza, T. [Univ. of the Philippines Los Banos, Laguna (Philippines). Dept of Agronomy

2000-07-01

A former haciendero owned sugarcane plantation in Negros Occidental, Philippines was transformed into a diversified, self-reliant, agro-ecological village, and its transition is documented in this paper. In 1995, through the Comprehensive Agrarian Reform Program, the Philippine Government awarded 87 hectares of land to 76 hacienda workers. Community organizing, farm planning, training in organic farming, and loan support from a number of social welfare agencies were all areas where the community received assistance. The sugarcane production has been reduced at Flora since the land transition, and the community diversified into the growing of organic rice, corn and vegetables. Through its transition into an agro-ecological village, the Flora community has become more self-reliant in the areas of food and energy. Most individual farms and communally farmed areas have adopted organic based farming practices. The main products sold off the farm are sugarcane and high value vegetables. The MASIPAG rice farming system is being adhered to in the production of rice, the community's staple food. Nitrogen fixed during straw decomposition and the use of azolla, a nitrogen-fixing plant, represent some of the sources of nitrogen for the rice production. Other nutrient sources used are the mudpress from sugarcane processing and rice hull ash. To encourage nitrogen fixation and soil carbon accumulation from cane litter, a system of continuous trash farming was implemented for the production of sugarcane. In excess of 140 water buffaloes (carabaos) are employed for tillage and on-farm hauling, which minimizes the requirements for fossil fuels. Liquid propane gas (LPG), kerosene and wood fuel use in home cooking are being minimized by the efficient rice hull cookers. The local environmental impacts and greenhouse gas emissions are minimized, and the Flora community largely meets its requirements in terms of food security, on-farm energy and income. refs., 1 tab., 12 figs.

Fuel flexible distributed combustion for efficient and clean gas turbine engines

International Nuclear Information System (INIS)

Khalil, Ahmed E.E.; Gupta, Ashwani K.

2013-01-01

Highlights: • Examined distributed combustion for gas turbines applications using HiTAC. • Gaseous, liquid, conventional and bio-fuels are examined with ultra-low emissions. • Novel design of fuel flexibility without any atomizer for liquid fuel sprays. • Demonstrated fuel flexibility with emissions x and CO, low noise, enhanced stability, higher efficiency and alleviation of combustion instability. Distributed reaction conditions were achieved using swirl for desirable controlled mixing between the injected air, fuel and hot reactive gases from within the combustor prior to mixture ignition. In this paper, distributed combustion is further investigated using a variety of fuels. Gaseous (methane, diluted methane, hydrogen enriched methane and propane) and liquid fuels, including both traditional (kerosene) and alternate fuels (ethanol) that cover a wide range of calorific values are investigated with emphasis on pollutants emission and combustor performance with each fuel. For liquid fuels, no atomization or spray device was used. Performance evaluation with the different fuels was established to outline the flexibility of the combustor using a wide range of fuels of different composition, phase and calorific value with specific focus on ultra-low pollutants emission. Results obtained on pollutants emission and OH * chemiluminescence for the specific fuels at various equivalence ratios are presented. Near distributed combustion conditions with less than 8 PPM of NO emission were demonstrated under novel premixed conditions for the various fuels tested at heat (energy) release intensity (HRI) of 27 MW/m 3 -atm. and a rather high equivalence ratio of 0.6. Higher equivalence ratios lacked favorable distributed combustion conditions. For the same conditions, CO emission varied for each fuel; less than 10 ppm were demonstrated for methane based fuels, while heavier liquid fuels provided less than 40 ppm CO emissions. Lower emissions of NO ( x can be possible by

Union Gas and Ontario gas production

International Nuclear Information System (INIS)

Cameron, C.

2001-01-01

A step-by-step review of the tie-in process of new production wells into the Union Gas System is described. Requirements of the producer and those of Union Gas are explained. Also described are the choices available to the producer to sell his gas. He can sell either to Union Gas directly at an agreed upon price, or the producer has the option to have what is called an M13 contract which allows him to sell his gas at Dawn, where it can be stored within parameters of the contract, and sold to any buyer at Dawn at a negotiated rate. This arrangement, while entailing a much greater administrative load than direct sale to Union Gas, nevertheless, allows the producer to take advantage of market fluctuations. A third option provided by Union Gas is to make available to the producer storage space greater than the provisions of the M13 contract at current market rate, thereby opening up the opportunity to the producer to capture additional value in later winter months (when gas is in greater demand)

PM2.5 in household kitchens of Bhaktapur, Nepal, using four different cooking fuels

Science.gov (United States)

Pokhrel, Amod K.; Bates, Michael N.; Acharya, Jiwan; Valentiner-Branth, Palle; Chandyo, Ram K.; Shrestha, Prakash S.; Raut, Anil K.; Smith, Kirk R.

2015-07-01

In studies examining the health effects of household air pollution (HAP), lack of affordable monitoring devices often precludes collection of actual air pollution data, forcing use of exposure indicators, such as type of cooking fuel used. Among the most important pollutants is fine particulate matter (PM2.5), perhaps the best single indicator of risk from smoke exposure. In this study, we deployed an affordable and robust device to monitor PM2.5 in 824 households in Bhaktapur, Nepal. Four primary cooking fuels were used in roughly equal proportions in these households: electricity (22%), liquefied petroleum gas (LPG) (29%), kerosene (23%), and biomass (26%). PM2.5 concentrations were measured in the kitchens using a light-scattering nephelometer, the UCB-PATS (University of California, Berkeley-Particle and Temperature monitoring System). The major predictors of PM2.5 concentrations in study households were investigated. The UCB-PATS results were well correlated with the gravimetric results (R2 = 0.84; for all fuels combined). The mean household PM2.5 concentrations across all seasons of the year were 656 (standard deviation (SD):924) μg/m3 from biomass; 169 (SD: 207) μg/m3 from kerosene; 101 (SD: 130) μg/m3 from LPG; and 80 (SD: 103) μg/m3 from electric stoves. In the multivariate regression of PM2.5 measures, compared with electric stoves, use of LPG, kerosene and biomass stoves were associated with increased indoor PM2.5 concentrations of 65% (95% CI: 38-95%), 146% (103-200%), and 733% (589-907%), respectively. The UCB-PATS performed well in the field. Biomass fuel stoves without flues were the most significant sources of PM2.5, followed by kerosene and then LPG stoves. Outdoor PM2.5, and season influenced indoor PM2.5 levels. Results support careful use of inexpensive light-scattering monitors for monitoring of HAP in developing countries.

Shale gas. Shale gas formation and extraction

International Nuclear Information System (INIS)

Renard, Francois; Artru, Philippe

2015-10-01

A first article recalls the origin of shale gases and technological breakthroughs which allowed their exploitation, describes the development of shale gas exploitation in the USA during the 2000's and the consequences for the gas and electricity markets, and discusses the various environmental impacts (risks of pollution of aquifers, risks of induced seismicity, use and processing of drilling and production waters). The second article describes the formation of shale gas: presence of organic matter in sediments, early evolution with the biogenic gas, burrowing, diagenesis and oil formation, thermal generation of gas (condensates and methane). The author indicates the location of gas within the rock, and the main sites of shale oils and shale gases in the World. In the next part, the author describes the various phases of shale gas extraction: exploration, oriented drillings, well preparation for hydraulic fracturing, fracturing, processing of fracturing fluids, flow-back, gas production and transport, aquifer protection. He finally gives a brief overview of technical evolution and of shale gas economy

Gas-ion laser with gas pressure maintenance means

International Nuclear Information System (INIS)

Thatcher, J.B.

1975-01-01

A gas-ion laser is described including means to maintain the ionizable gas in the laser cavity at a rather constant pressure over an extended period of time to significantly increase the useful life of the gas-ion laser. The gas laser includes a gas makeup system having a high pressure source or storage container and a regulating valve. The valve has a permeable solid state orifice member through which the gas flows from the high pressure source to the laser cavity to replenish the gas in the laser cavity and maintain the gas pressure in the cavity rather constant. The permeable orifice member is selected from a solid state material having a permeability that is variable in relation to the magnitude of the energy applied to the orifice member. The gas-ion laser has a valve operating means such as a heater for varying the applied energy such as thermal energy to the member to regulate the gas flow. Additionally, the gas-ion laser has a valve control means that is responsive to the gas pressure in the laser cavity for controlling the valve control means to maintain the pressure at a desired level. (U.S.)

Green gas. Gas of natural gas quality from biomass. Update of the 2004 study

International Nuclear Information System (INIS)

Welink, Jan-Henk; Dumont, M.; Kwant, K.

2007-01-01

In 2004 a study was published on green gas. Green gas is defined as a gaseous energy carrier from renewable biomass with a similar quality as natural gas. As a result of new developments in the field of co-digestion/fermentation the Dutch Ministry of Economic Affairs asked it's agency SenterNovem to update the 2004 study. The aim of the update is (1) to gain insight into operational aspects of green gas projects, e.g. reliability, efficiency and maintenance aspects; (2) stimulate the production of green gas, taking into account the economics of green gas projects, calculation of the financial gap of green gas production, efficient use of biogas (conversion to electricity or directly input into the natural gas distribution systems, and aspects with regard to commercialization and the market; and (3) the potential of green gas [nl

Microwave plasma for hydrogen production from liquids

Directory of Open Access Journals (Sweden)

Czylkowski Dariusz

2016-06-01

Full Text Available The hydrogen production by conversion of liquid compounds containing hydrogen was investigated experimentally. The waveguide-supplied metal cylinder-based microwave plasma source (MPS operated at frequency of 915 MHz at atmospheric pressure was used. The decomposition of ethanol, isopropanol and kerosene was performed employing plasma dry reforming process. The liquid was introduced into the plasma in the form of vapour. The amount of vapour ranged from 0.4 to 2.4 kg/h. Carbon dioxide with the flow rate ranged from 1200 to 2700 NL/h was used as a working gas. The absorbed microwave power was up to 6 kW. The effect of absorbed microwave power, liquid composition, liquid flow rate and working gas fl ow rate was analysed. All these parameters have a clear influence on the hydrogen production efficiency, which was described with such parameters as the hydrogen production rate [NL(H2/h] and the energy yield of hydrogen production [NL(H2/kWh]. The best achieved experimental results showed that the hydrogen production rate was up to 1116 NL(H2/h and the energy yield was 223 NL(H2 per kWh of absorbed microwave energy. The results were obtained in the case of isopropanol dry reforming. The presented catalyst-free microwave plasma method can be adapted for hydrogen production not only from ethanol, isopropanol and kerosene, but also from different other liquid compounds containing hydrogen, like gasoline, heavy oils and biofuels.

Gas turbine

International Nuclear Information System (INIS)

Yang, Ok Ryong

2004-01-01

This book introduces gas turbine cycle explaining general thing of gas turbine, full gas turbine cycle, Ericson cycle and Brayton cycle, practical gas turbine cycle without pressure loss, multiaxial type gas turbine cycle and special gas turbine cycle, application of basic theory on a study on suction-cooling gas turbine cycle with turbo-refrigerating machine using the bleed air, and general performance characteristics of the suction-cooling gas turbine cycle combined with absorption-type refrigerating machine.

A new stationary droplet evaporation model and its validation

OpenAIRE

Fang WANG; Jie YAO; Shaofeng YANG; Rui LIU; Jie JIN

2017-01-01

The liquid droplet evaporation character is important for not only combustion chamber design process but also high-accuracy spray combustion simulation. In this paper, the suspended droplets’ evaporation character was measured in a quiescent high-temperature environment by micro high-speed camera system. The gasoline and kerosene experimental results are consistent with the reference data. Methanol, common kerosene and aviation kerosene droplet evaporation characteristics, as well as their ev...

Gas-controlled dynamic vacuum insulation with gas gate

Science.gov (United States)

Benson, D.K.; Potter, T.F.

1994-06-07

Disclosed is a dynamic vacuum insulation comprising sidewalls enclosing an evacuated chamber and gas control means for releasing hydrogen gas into a chamber to increase gas molecule conduction of heat across the chamber and retrieving hydrogen gas from the chamber. The gas control means includes a metal hydride that absorbs and retains hydrogen gas at cooler temperatures and releases hydrogen gas at hotter temperatures; a hydride heating means for selectively heating the metal hydride to temperatures high enough to release hydrogen gas from the metal hydride; and gate means positioned between the metal hydride and the chamber for selectively allowing hydrogen to flow or not to flow between said metal hydride and said chamber. 25 figs.

Acid Gas Removal from Natural Gas with Alkanolamines

DEFF Research Database (Denmark)

Sadegh, Negar

commercially for the removal of acid gas impurities from natural gas. Alkanolamines, simple combinations of alcohols and ammonia, are the most commonly used category of chemical solvents for acid gas capture. This Ph.D. project is aboutthermodynamics of natural gas cleaning process with alkanolamines......Some 40 % of the world’s remaining gas reserves are sour or acid, containing large quantities of CO2 and H2S and other sulfur compounds. Many large oil and gas fields have more than 10 mole % CO2 and H2S content. In the gas processing industry absorption with chemical solvents has been used...... pressure on acid gas solubility was also quantitatively investigated through both experimental and modeling approaches....

Life-cycle analysis of shale gas and natural gas.

Energy Technology Data Exchange (ETDEWEB)

Clark, C.E.; Han, J.; Burnham, A.; Dunn, J.B.; Wang, M. (Energy Systems); ( EVS)

2012-01-27

The technologies and practices that have enabled the recent boom in shale gas production have also brought attention to the environmental impacts of its use. Using the current state of knowledge of the recovery, processing, and distribution of shale gas and conventional natural gas, we have estimated up-to-date, life-cycle greenhouse gas emissions. In addition, we have developed distribution functions for key parameters in each pathway to examine uncertainty and identify data gaps - such as methane emissions from shale gas well completions and conventional natural gas liquid unloadings - that need to be addressed further. Our base case results show that shale gas life-cycle emissions are 6% lower than those of conventional natural gas. However, the range in values for shale and conventional gas overlap, so there is a statistical uncertainty regarding whether shale gas emissions are indeed lower than conventional gas emissions. This life-cycle analysis provides insight into the critical stages in the natural gas industry where emissions occur and where opportunities exist to reduce the greenhouse gas footprint of natural gas.

Investigation of the synergistic effect of alcoholic compounds on the extraction of H3PO4 from Syrian wet phosphoric acid by TBP

International Nuclear Information System (INIS)

Abdulbaki, M. K.; Shino, O.; Wahoud, A.

2006-01-01

This paper studies the synergistic effects of alcoholic compounds such as isoamyl alcohol. Pentanol, hexanol and heptanol on the extraction of H 3 PO 4 from Syrian phosphoric acid by (TBP). The possibility to use these alcoholic compounds as a diluent instead of kerosene was also studied. The results show that the alcoholic compounds has bigger extraction yield than (TBP) diluted in kerosene. The alcoholic compounds has an important synergistic effect, when it was used as a diluent instead of kerosene, on the extraction of H 3 PO 4 by (TBP) and they have a bigger extraction yield and the quicker phase separation comparing with kerosene. Extraction of uranium, fluoride, sulfate and heavy metals is relatively small. (Authors)

Second dimension column ensemble pressure tuning in comprehensive two-dimensional gas chromatography.

Science.gov (United States)

Sharif, Khan M; Kulsing, Chadin; Junior, Ademario I da Silva; Marriott, Philip J

2018-02-09

A pressure tunable (PT) coupled column ensemble has been implemented for the second dimension ( 2 D) separation in comprehensive two dimensional gas chromatography (GC×PTGC). This process requires two columns to be connected by a pressure junction, as a replacement for a single narrow bore, short column in 2 D. Various 2 D 1 and 2 D 2 columns may be selected to provide complementary selectivity (polarity) compared to the 1 D column. The tunable residence time arising from differential pressure drop in each 2 D column results in a tunable fractional contribution of each column in the 2 D separation. A sample mixture comprising different chemical classes, including alkanes and alcohols, is used to identify the feasibility and extent of selectivity tuning possible in GC×PTGC. The column length is also varied due to the imposed challenge of wraparound in the PT coupled column system as pressures are adjusted in the 2 D separation. Different experimental parameters, stationary phase materials and column lengths have been applied to investigate and understand the separation behaviour of the 2 D PT coupled column GC×GC system. Results are discussed considering analyte retention time, peak width, linear velocity and the contribution of each 2 D column. A specific and unexpected example of GC×GC separation was demonstrated where the peak positions of polar and apolar compounds could almost swap their 2 D retention position by application of PT. Kerosene was analysed as an example of complex sample analysis by GC×PTGC system. This process is shown to be a practical approach for altering different stationary phase selectivities in a single 2 D arrangement in GC×GC. Copyright © 2017 Elsevier B.V. All rights reserved.

75 FR 42432 - Northern Natural Gas Company, Southern Natural Gas Company, Florida Gas Transmission Company, LLC...

Science.gov (United States)

2010-07-21

... Natural Gas Company, Southern Natural Gas Company, Florida Gas Transmission Company, LLC, Transcontinental... abandonment of facilities by Northern Natural Gas Company, Southern Natural Gas Company, Florida Gas... resources, fisheries, and wetlands; Cultural resources; Vegetation and wildlife; Endangered and threatened...

Indoor combustion and asthma.

Science.gov (United States)

Belanger, Kathleen; Triche, Elizabeth W

2008-08-01

Indoor combustion produces both gases (eg, nitrogen dioxide, carbon monoxide) and particulate matter that may affect the development or exacerbation of asthma. Sources in the home include both heating devices (eg, fireplaces, woodstoves, kerosene heaters, flued [ie, vented] or nonflued gas heaters) and gas stoves for cooking. This article highlights the recent literature examining associations between exposure to indoor combustion and asthma development and severity. Since asthma is a chronic condition affecting both children and adults, both age groups are included in this article. Overall, there is some evidence of an association between exposure to indoor combustion and asthma, particularly asthma symptoms in children. Some sources of combustion such as coal stoves have been more consistently associated with these outcomes than other sources such as woodstoves.

Inequality in the distribution of expense allocated to the main energy fuels for Mexican households. 1968-2006

Energy Technology Data Exchange (ETDEWEB)

Rosas-Flores, Jorge Alberto [Division de Estudios de Posgrado, Facultad de Ingenieria, Universidad Nacional Autonoma de Mexico, Ciudad Universitaria Coyoacan 04510, DF (Mexico); Morillon Galvez, David; Fernandez Zayas, Jose Luis [Instituto de Ingenieria, Universidad Nacional Autonoma de Mexico, Ciudad Universitaria, Coyoacan 04510, DF (Mexico)

2010-09-15

Energy is a decisive and essential factor to provide quality of life, technological development related to its use, and an economic development overview of a given country. This essay presents the expense distribution allocated to the main fuel sources used at Mexican households. The essay herein was carried out for the 1968-2006 period. The main purpose of this essay is to determine the expense allocation of the main energy fuels (electricity, gas, firewood, kerosene, gasoline).The methodology used in this essay is based on the Lorenz curves and Gini coefficient. (author)

Natural gas is more than gas power plants

International Nuclear Information System (INIS)

Lind, Oddvar

2000-01-01

Through the Statpipe gas line at Karmoey, Norway supplies 20% of the natural gas on the European market. The pipeline is 'leaking' a little bit of gas to the local communities at Karmoey and Haugesund. These communities have replaced 65% of their oil consumption with natural gas, which is a fine contribution to a better environment. The supplier of the natural gas, Gasnor ASA in this case, claims an energy efficiency of 90% at the end user because the gas burns directly and the loss in the pipeline is minimal. The efficiency of natural gas utilisation is twice that of the planned gas power stations in West-Norway, subtracting the losses in the electrical network. Gasnor ASA competes with oil suppliers and, if necessary, with electric utilities. The county hospital at Haugesund is quoted as an example. The hospital has two large boilers with dual fuel burners. They have been using natural gas since 1998 because it was worth while both economically and environmentally. The use of natural gas in the transport sector would be very important, but the necessary infrastructure is very little developed. For instance, five diesel-powered ferries on the Boknafjord emit as much NOx as the planned gas power plant at Kaarstoe

Alaska gas pipeline and the global natural gas market

International Nuclear Information System (INIS)

Slutz, J.

2006-01-01

The global natural gas market was discussed in relation to the Alaska natural gas pipeline project. Natural gas supply forecasts to the year 2025 were presented. Details of the global liquefied natural gas (LNG) market were discussed. Charts were included for United States natural gas production, consumption, and net imports up to the year 2030. The impact of high natural gas prices on the manufacturing sector and the chemicals industry, agricultural, and ethanol industries were discussed. Natural gas costs around the world were also reviewed. The LNG global market was discussed. A chart of world gas reserves was presented, and global LNG facilities were outlined. Issues related to the globalization of the natural gas trade were discussed. Natural gas imports and exports in the global natural gas market were reviewed. A chart of historical annual United States annual LNG imports was presented. tabs., figs

Green gas in the natural gas network

International Nuclear Information System (INIS)

Bruinsma, B.

2007-09-01

The aim of this study is to map the technical, economic and organizational options and limitations of feeding biogas back into the natural gas grid by means of regional co-digestion. Emphasis is put on feeding back into the natural gas grid, analogous to a comparable situation in a number of landfill gas projects. This report first provides insight into the energetic potential of co-digestion. Next several landfill gas projects are examined that feed back into the natural gas grid. After that the political and policy-related issues and preconditions for feeding back biogas from co-digestion are discussed, including the technical and economic aspects. Finally, a picture is painted of the future potential of green gas. [mk] [nl

Role of stranded gas in increasing global gas supplies

Science.gov (United States)

Attanasi, E.D.; Freeman, P.A.

2013-01-01

This report synthesizes the findings of three regional studies in order to evaluate, at the global scale, the contribution that stranded gas resources can make to global natural gas supplies. Stranded gas, as defined for this study, is natural gas in discovered conventional gas and oil fields that is currently not commercially producible for either physical or economic reasons. The regional studies evaluated the cost of bringing the large volumes of undeveloped gas in stranded gas fields to selected markets. In particular, stranded gas fields of selected Atlantic Basin countries, north Africa, Russia, and central Asia are screened to determine whether the volumes are sufficient to meet Europe’s increasing demand for gas imports. Stranded gas fields in Russia, central Asia, Southeast Asia, and Australia are also screened to estimate development, production, and transport costs and corresponding gas volumes that could be supplied to Asian markets in China, India, Japan, and South Korea. The data and cost analysis presented here suggest that for the European market and the markets examined in Asia, the development of stranded gas provides a way to meet projected gas import demands for the 2020-to-2040 period. Although this is a reconnaissance-type appraisal, it is based on volumes of gas that are associated with individual identified fields. Individual field data were carefully examined. Some fields were not evaluated because current technology was insufficient or it appeared the gas was likely to be held off the export market. Most of the evaluated stranded gas can be produced and delivered to markets at costs comparable to historical prices. Moreover, the associated volumes of gas are sufficient to provide an interim supply while additional technologies are developed to unlock gas diffused in shale and hydrates or while countries transition to making a greater use of renewable energy sources.

Assessment of greenhouse gas emissions from natural gas

International Nuclear Information System (INIS)

Anon

2000-01-01

The study, 'Assesment of greenhouse gas emission from natural gas' by independent consultants Energetics Pty Ltd, shows that natural gas has significantly fewer greenhouses gas emissions than either black or brown cola for the defined life cycle stages. The life cycle emissions from natural gas use by an Australian Major User are approximately 50% less than the emissions from Victorian brown coal and approximately 38% less than the emissions from Australian average black coal. Australian Best Practice gas fired electricity generation is estimated to emit between 514 and 658 kg CO 2 e/MWh. By comparison, Australian Best Practice coal-fired electricity generation is estimated to emit between 907 and 1,246 kg CO 2 e/MWh for black and brown coal respectively. Greenhouse gas emissions from Australian Best Practice gas-fired electricity generation using combined cycle gas turbines (including full fuel cycle emissions) vary from 41% to 46% of the emissions from brown coal-fired electricity generation and 57% to 64% of emissions from black coal-fired electricity generation. Greenhouse gas emissions from direct gas supply water heating range from 1,470 to 2,042 kilograms per annum. This compares with emissions of 1,922 to 2,499 kg for electric heating from gas-fired electricity generation and 3,975 to 5,393 kg for coal-fired electricity generation. The implications for greenhouse policy nationally are also discussed, emphasising the need to review national energy policy, currently tied to 'fuel neutrality' doctrine

Gas Sensor

KAUST Repository

Luebke, Ryan

2015-01-22

A gas sensor using a metal organic framework material can be fully integrated with related circuitry on a single substrate. In an on-chip application, the gas sensor can result in an area-efficient fully integrated gas sensor solution. In one aspect, a gas sensor can include a first gas sensing region including a first pair of electrodes, and a first gas sensitive material proximate to the first pair of electrodes, wherein the first gas sensitive material includes a first metal organic framework material.

Gas Sensor

KAUST Repository

Luebke, Ryan; Eddaoudi, Mohamed; Omran, Hesham; Belmabkhout, Youssef; Shekhah, Osama; Salama, Khaled N.

2015-01-01

A gas sensor using a metal organic framework material can be fully integrated with related circuitry on a single substrate. In an on-chip application, the gas sensor can result in an area-efficient fully integrated gas sensor solution. In one aspect, a gas sensor can include a first gas sensing region including a first pair of electrodes, and a first gas sensitive material proximate to the first pair of electrodes, wherein the first gas sensitive material includes a first metal organic framework material.

A Gas Chromatographic System for the Detection of Ethylene Gas Using Ambient Air as a Carrier Gas.

Science.gov (United States)

Zaidi, Nayyer Abbas; Tahir, Muhammad Waseem; Vellekoop, Michael J; Lang, Walter

2017-10-07

Ethylene gas is a naturally occurring gas that has an influence on the shelf life of fruit during their transportation in cargo ships. An unintentional exposure of ethylene gas during transportation results in a loss of fruit. A gas chromatographic system is presented here for the detection of ethylene gas. The gas chromatographic system was assembled using a preconcentrator, a printed 3D printed gas chromatographic column, a humidity sensor, solenoid valves, and an electrochemical ethylene gas sensor. Ambient air was used as a carrier gas in the gas chromatographic system. The flow rate was fixed to 10 sccm. It was generated through a mini-pump connected in series with a mass flow controller. The metal oxide gas sensor is discussed with its limitation in ambient air. The results show the chromatogram obtained from metal oxide gas sensor has low stability, drifts, and has uncertain peaks, while the chromatogram from the electrochemical sensor is stable and precise. Furthermore, ethylene gas measurements at higher ppb concentration and at lower ppb concentration were demonstrated with the electrochemical ethylene gas sensor. The system separates ethylene gas and humidity. The chromatograms obtained from the system are stable, and the results are 1.2% repeatable in five similar measurements. The statistical calculation of the gas chromatographic system shows that a concentration of 2.3 ppb of ethylene gas can be detected through this system.

Gas exploitation and gas conversion; Gassutnyttelse og gasskonvertering

Energy Technology Data Exchange (ETDEWEB)

Laading, Gjert

1998-07-01

This presentation deals with some of the challenges and possibilities connected with ''stranded'' gas. These are offshore gas reserves, especially associated gas, that is not connected with the market and that cannot be piped onshore, and where reinjection is not profitable, and where flaring off is not an option. There is increasing interest all over the world to find economical and environmentally friendly solutions to this problem. A good solution will render such fields economically developable and will to a high degree increase the total volume of the world's exploitable gas reserves. Since synthesis gas is a dominating cost element in most chemical conversion processes for gas, the synthesis gases are discussed in some detail. There is also a discussion of the conversion of the gas to Methanol, Synthetic oil (Syncrude and Synfuels) and to DME (Di-methyl-ether). Two methods for gas transport from the field are discussed; LNG on floating production storage and off loading (FPSO), and Gas hydrates. Principles, limitations and conditions for placing those processes on a FPSO. Finally, the presentation discusses the most important economic factors related to the exploitation of offshore gas, and suggests some possibilities for future development.11 figs.

Feasibility of flare gas reformation to practical energy in Farashband gas refinery: no gas flaring.

Science.gov (United States)

Rahimpour, Mohammad Reaza; Jokar, Seyyed Mohammad

2012-03-30

A suggested method for controlling the level of hazardous materials in the atmosphere is prevention of combustion in flare. In this work, three methods are proposed to recover flare gas instead of conventional gas-burning in flare at the Farashband gas refinery. These methods aim to minimize environmental and economical disadvantages of burning flare gas. The proposed methods are: (1) gas to liquid (GTL) production, (2) electricity generation with a gas turbine and, (3) compression and injection into the refinery pipelines. To find the most suitable method, the refinery units that send gas to the flare as well as the required equipment for the three aforementioned methods are simulated. These simulations determine the amount of flare gas, the number of GTL barrels, the power generated by the gas turbine and the required compression horsepower. The results of simulation show that 563 barrels/day of valuable GTL products is produced by the first method. The second method provides 25 MW electricity and the third method provides a compressed natural gas with 129 bar pressure for injection to the refinery pipelines. In addition, the economics of flare gas recovery methods are studied and compared. The results show that for the 4.176MMSCFD of gas flared from the Farashband gas refinery, the electricity production gives the highest rate of return (ROR), the lowest payback period, the highest annual profit and mild capital investment. Therefore, the electricity production is the superior method economically. Copyright © 2012 Elsevier B.V. All rights reserved.

Green gas. Gas of natural gas quality from biomass. Update of the 2004 study; Groen Gas. Gas van aardgaskwaliteit uit biomassa. Update van de studie uit 2004

Energy Technology Data Exchange (ETDEWEB)

Welink, Jan-Henk; Dumont, M.; Kwant, K. Datum januari 2007

2007-01-15

In 2004 a study was published on green gas. Green gas is defined as a gaseous energy carrier from renewable biomass with a similar quality as natural gas. As a result of new developments in the field of co-digestion/fermentation the Dutch Ministry of Economic Affairs asked it's agency SenterNovem to update the 2004 study. The aim of the update is (1) to gain insight into operational aspects of green gas projects, e.g. reliability, efficiency and maintenance aspects; (2) stimulate the production of green gas, taking into account the economics of green gas projects, calculation of the financial gap of green gas production, efficient use of biogas (conversion to electricity or directly input into the natural gas distribution systems, and aspects with regard to commercialization and the market; and (3) the potential of green gas. [Dutch] De laatste jaren wordt er gewerkt aan initiatieven om groen gas te produceren. Een recent initiatief is het opwaarderen van biogas tot aardgaskwaliteit door Biogast, wat er toe zal leiden dat al deze zomer Eneco op kleinschalig niveau duurzaam gas levert aan eindverbruikers. Het potentieel aan groen gas dat mogelijk gemaakt zou kunnen worden, is de laatste jaren ook veranderd. Met name de voorspoedige ontwikkelingen op het gebied van co-vergisting met mest zorgen voor een toename van het potentieel. In 2004 is een studie gemaakt over groen gas. Vanwege de voorspoedige ontwikkelingen op het gebied van co-vergisting is de situatie die gold voor het rapport uit 2004 veranderd. Het ministerie van Economische Zaken heeft SenterNovem gevraagd om een update te maken van de studie over groen gas uit 2004. De doelstelling van de update van deze studie Groen Gas is (1) het verkrijgen van inzicht op basis van de huidige ontwikkelingen, in: de bedrijfstechnische aspecten van dergelijke projecten, zoals betrouwbaarheid, rendement en onderhoudsaspecten; (2) aspecten voor het mogelijk stimuleren van de productie van groen gas. Hierbij hoort: (a

US crude oil, natural gas, and natural gas liquids reserves

International Nuclear Information System (INIS)

1992-01-01

This report presents estimates of proved reserves of crude oil, natural gas, and natural gas liquids as of December 31, 1991, as well as production volumes for the United States, and selected States and State subdivisions for the year 1991. Estimates are presented for the following four categories of natural gas: total gas (wet after lease separation), its two major components (nonassociated and associated-dissolved gas), and total dry gas (wet gas adjusted for the removal of liquids at natural gas processing plants). In addition, two components of natural gas liquids, lease condensate and natural gas plant liquids, have their reserves and production data presented. Also included is information on indicated additional crude oil reserves and crude oil, natural gas, and lease condensate reserves in nonproducing reservoirs. A discussion of notable oil and gas exploration and development activities during 1991 is also presented

75 FR 13524 - Northern Natural Gas Company, Southern Natural Gas Company, Florida Gas Transmission Company, LLC...

Science.gov (United States)

2010-03-22

... Natural Gas Company, Southern Natural Gas Company, Florida Gas Transmission Company, LLC, Transcontinental... notice that on March 5, 2010, Northern Natural Gas Company (Northern Natural), 1111 South 103rd Street, Omaha, Nebraska 68124- 1000, filed on behalf of itself and other owners, Southern Natural Gas Company...

Radioisotope tracer study in a pilot-scale trickle bed reactor

Energy Technology Data Exchange (ETDEWEB)

Pant, H.J.; Pendharkar, A.S. [Bhabha Atomic Research Centre, Isotope Applications Div, Bombay (India); Prasad, J.S.; Maiti, R.N.; Chawla, R.; Lahri, R.N.; Ram Babu, D. [Engineers India Limited, Gurgaon, Haryana (India); Berne, Ph. [CEA Grenoble, DTEN/SAT, 38 (France)

2001-07-01

Trickle bed reactor (TBR) is a reactor in which a liquid and a gas phase flow concurrently downwards through a fixed bed of catalyst particles while the reaction takes place. The trickle bed reactors find a number of applications in petroleum refining, chemical. petro-chemical and bio-chemical processes due to their suitability for hydro-processing operations.The knowledge of radial distribution, mean residence time (MRT). liquid holdup and degree of axial mixing is a basic requirement to evaluate the reactor performance of a TBR, its optimal size, the physical and chemical interactions and the pumping requirements. Measurement and analysis of residence time distribution (RTD) of liquid phase facilitate the determination of these parameters. This paper describes the measurement of RTD of liquid phase in a pilot-scale trickle bed reactor operating at high pressure. Kerosene and nitrogen were used as liquid and gas phase, respectively. Porous alumina catalyst particles were used as packing. Bromine-82 as para-di-bromo benzene was used as a tracer to measure RTD of organic liquid phase. The RTD of kerosene was measured as a function of liquid and gas flow rates and pressure. The axial dispersion model with exchange between active and dead zones was proposed and used to simulate the measured RTD data and model parameters i.e mean residence time ({tau}), Peclet Number (Pe), dynamic fraction of the liquid ({phi}) and the number of transfer units (N) were obtained. The results of the simulations indicated intermediate degree of axial mixing of liquid phase. The RTD predicted by the axial dispersion model with exchange between active and dead zones fits well to the experimentally measured RTD data and thus is a suitable model to describe the dynamics of the liquid phase in TBRs filled with porous catalyst particles. (authors)

Safety regulation on high-pressure gas and gas business

International Nuclear Information System (INIS)

Kim, Du Yeoung; An, Dae Jun

1978-09-01

This book is divided into two parts. The first part introduces safety regulation on high-pressure gas, enforcement ordinance on safety regulation about high-pressure gas and enforcement regulation on safety regulation about high-pressure gas. The second part indicates regulations on gas business such as general rules, gas business gas supplies, using land, supervision, supple mentary rules and penalty. It has two appendixes on expected questions and questions during last years.

Natural gas

Energy Technology Data Exchange (ETDEWEB)

Fraser, J W

1967-08-01

This report on the natural gas industry of Canada includes: composition and uses of natural gas, production statistics, exploration and development, reserve estimates, natural gas processing, transportation, and marketing. For the Canadian natural gas industry, 1966 was a year of moderate expansion in all phases, with a strong demand continuing for sulfur and liquid hydrocarbons produced as by-products of gas processing. Value of natural gas production increased to $199 million and ranked sixth in terms of value of mineral ouput in Canada. Currently, natural gas provides over 70% of Canada's energy requirements. Proved remaining marketable reserves are estimated to be in excess of a 29-yr supply.

Working paper Green Gas. Overview of policy issues on Green Gas; Werkdocument Groen Gas. Overzicht Beleidsvraagstukken Groen Gas

Energy Technology Data Exchange (ETDEWEB)

Dumont, M.

2012-07-15

Early 2010, the interdepartmental Accelerator Team Green Gas was established which deals with policy issues in the field of Green Gas. This working document reflects the current state of affairs. Via the website www.groengas.nl new versions will be made available on a regular basis [Dutch] Begin 2010 is het interdepartementale Versnellerteam Groen Gas opgericht dat zich bezighoudt met vraagstukken op het gebied van Groen Gas die op het terrein van de rijksoverheid liggen. Dit werkdocument geeft de huidige stand van zaken weer. Via www.groengas.nl komen geregeld nieuwe versies beschikbaar.

Improved gas mixtures for gas-filled particle detectors

Science.gov (United States)

Christophorou, L.G.; McCorkle, D.L.; Maxey, D.V.; Carter, J.G.

Improved binary and tertiary gas mixture for gas-filled particle detectors are provided. The components are chosen on the basis of the principle that the first component is one gas or mixture of two gases having a large electron scattering cross section at energies of about 0.5 eV and higher, and the second component is a gas (Ar) having a very small cross section at and below about 0.5 eV; whereby fast electrons in the gaseous mixture are slowed into the energy range of about 0.5 eV where the cross section for the mixture is small and hence the electron mean free path is large. The reduction in both the cross section and the electron energy results in an increase in the drift velocity of the electrons in the gas mixtures over that for the separate components for a range of E/P (pressure-reduced electron field) values. Several gas mixtures are provided that provide faster response in gas-filled detectors for convenient E/P ranges as compared with conventional gas mixtures.

Rio Vista gas leak study: Belleaire Gas Field, California

International Nuclear Information System (INIS)

Wilkey, P.L.

1992-08-01

The Rio Vista gas leak study evaluated methods for remotely sensing gas leaks from buried pipelines and developed methods to elucidate methane transport and microbial oxidation in soils. Remote-sensing methods were evaluated by singing gas leaks along an abandoned Pacific Gas and Electric (PG ampersand E) gas field collection line in northern California and applying surface-based and airborne remote-sensing techniques in the field, including thermal imaging, laser imaging, and multispectral imagery. The remote-sensing techniques exhibited limitations in range and in their ability to correlate with ground truth data. To elucidate methane transport and microbial oxidation in soils, a study of a controlled leak permitted field testing of methods so that such processes could be monitored and evaluated. Monitoring and evaluation techniques included (1) field measurement of soil-gas concentrations, temperatures, and pressures; (2) laboratory measurement of soil physical/chemical properties and activity of methane-oxidizing microorganisms by means of field samples; and (3) development of a preliminary numerical analysis technique for combined soil-gas transport/methane oxidation. Soil-gas concentrations at various depths responded rapidly to the high rate of gas leakage. The number of methane-oxidizing microorganisms in site soils rapidly increased when the gas leak was initiated and decreased after the leak was terminated. The preliminary field, laboratory, and numerical analysis techniques tested for this study of a controlled gas leak could be successfully applied to future studies of gas leaks. Because soil-gas movement is rapid and temporally variable, the use of several complementary techniques that permit generalization of site-specific results is favored

Home Fires

Science.gov (United States)

... smoke and poisonous gases collect first along the ceiling. Before opening a door, feel the doorknob and ... automatically if the heater falls over. Only use crystal clear K-1 kerosene in kerosene heaters. Never ...

Gas Hydrate Storage of Natural Gas

Energy Technology Data Exchange (ETDEWEB)

Rudy Rogers; John Etheridge

2006-03-31

Environmental and economic benefits could accrue from a safe, above-ground, natural-gas storage process allowing electric power plants to utilize natural gas for peak load demands; numerous other applications of a gas storage process exist. A laboratory study conducted in 1999 to determine the feasibility of a gas-hydrates storage process looked promising. The subsequent scale-up of the process was designed to preserve important features of the laboratory apparatus: (1) symmetry of hydrate accumulation, (2) favorable surface area to volume ratio, (3) heat exchanger surfaces serving as hydrate adsorption surfaces, (4) refrigeration system to remove heat liberated from bulk hydrate formation, (5) rapid hydrate formation in a non-stirred system, (6) hydrate self-packing, and (7) heat-exchanger/adsorption plates serving dual purposes to add or extract energy for hydrate formation or decomposition. The hydrate formation/storage/decomposition Proof-of-Concept (POC) pressure vessel and supporting equipment were designed, constructed, and tested. This final report details the design of the scaled POC gas-hydrate storage process, some comments on its fabrication and installation, checkout of the equipment, procedures for conducting the experimental tests, and the test results. The design, construction, and installation of the equipment were on budget target, as was the tests that were subsequently conducted. The budget proposed was met. The primary goal of storing 5000-scf of natural gas in the gas hydrates was exceeded in the final test, as 5289-scf of gas storage was achieved in 54.33 hours. After this 54.33-hour period, as pressure in the formation vessel declined, additional gas went into the hydrates until equilibrium pressure/temperature was reached, so that ultimately more than the 5289-scf storage was achieved. The time required to store the 5000-scf (48.1 hours of operating time) was longer than designed. The lower gas hydrate formation rate is attributed to a

Methods of natural gas liquefaction and natural gas liquefaction plants utilizing multiple and varying gas streams

Science.gov (United States)

Wilding, Bruce M; Turner, Terry D

2014-12-02

A method of natural gas liquefaction may include cooling a gaseous NG process stream to form a liquid NG process stream. The method may further include directing the first tail gas stream out of a plant at a first pressure and directing a second tail gas stream out of the plant at a second pressure. An additional method of natural gas liquefaction may include separating CO.sub.2 from a liquid NG process stream and processing the CO.sub.2 to provide a CO.sub.2 product stream. Another method of natural gas liquefaction may include combining a marginal gaseous NG process stream with a secondary substantially pure NG stream to provide an improved gaseous NG process stream. Additionally, a NG liquefaction plant may include a first tail gas outlet, and at least a second tail gas outlet, the at least a second tail gas outlet separate from the first tail gas outlet.

Investigation of hydrogen usage in aviation industry

International Nuclear Information System (INIS)

Yılmaz, İlker; İlbaş, Mustafa; Taştan, Murat; Tarhan, Cevahir

2012-01-01

Highlights: ► We examine usage of liquid hydrogen as a fuel in aircrafts. ► Engine performance is a little better for liquid hydrogen fuel than kerosene. ► Liquid hydrogen can be a potential alternative to kerosene as aviation fuel. ► Usage of liquid hydrogen will provide national independence for fuel supply. ► Increased production of liquid hydrogen will decrease its cost disadvantage. - Abstract: Fossil-based fuels are commonly used in aircraft engines but they have a polluting effect and they cause a greenhouse effect for our world. This study reports a research about aircraft gas turbine engines which are fired by liquid hydrogen (LH 2 ) in terms of performance and environmental aspects. Also, the performance and emissions of LH 2 fueled engines are compared with those of kerosene fired aircraft engines. Same flights from Istanbul to London, and Paris to Kabul are examined to estimate the emission from a conventional aircraft as an application in aviation sector. It is shown that the amount of NO x , HC and CO emissions for traveling by a conventional aircraft for London is 78.36, 1.202 and 22.4 kg, while Paris is 71.55, 1.171 and 21.63 kg, and Kabul is 111.44, 1.36 and 26.11 kg, respectively. For the use of liquid hydrogen as a fuel, amount of gas emissions decreases for any destination like London, Paris and Kabul. Total HC and CO emissions are going to be nearly 0 kg because of lack of carbon in the fuel. Also NO x emission is lower because of wider flammability limit of LH 2 . Results show that the aircraft engines with LH 2 have great potential for emissions reduction and engine performance parameters are a little better for LH 2 fuel. It is strongly emphasized that one of the most important advantages for the use of LH 2 is national independence for fuel supply. Oil cannot be extracted in every countries territory but LH 2 is producible for every country and this is so important for a countries freedom.

The UK and British Gas: Any future for Norwegian gas

International Nuclear Information System (INIS)

Jungles, P.

1996-01-01

The paper deals with the UK natural gas market and the future for Norwegian gas in the UK. The role of the British Gas in the domestic and European markets is discussed. Topics are: The UK gas supply market; the UK upstream gas market and the Interconnector; the European market, competition and deregulation; the prospects for Norwegian gas

Gas migration from oil and gas fields and associated hazards

International Nuclear Information System (INIS)

Gurevich, A.E.; Endres, B.L.; Robertson Jr, J.O.; Chilingar, G.V.

1993-01-01

The migration of gas from oil and gas formations to the surface is a problem that greatly affects those surface areas where human activity exists. Underground gas storage facilities and oil fields have demonstrated a long history of gas migration problems. Experience has shown that the migration of gas to the surface creates a serious potential risk of explosion, fires, noxious odors and potential emissions of carcinogenic chemicals. These risks must be seriously examined for all oil and gas operations located in urban areas. This paper presents the mechanics of gas migration, paths of migration and a review of a few of the risks that should be considered when operating a gas facility in an urban area. The gas can migrate in a continuous or discontinuous stream through porous, water-filled media to the surface. The primary force in this migration of gas is the difference between specific weights of gas and water

Hot fuel gas dedusting after sorbent-based gas cleaning

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-07-01

Advanced power generation technologies, such as Air Blown Gasification Cycle (ABGC), require gas cleaning at high temperatures in order to meet environmental standards and to achieve high thermal efficiencies. The primary hot gas filtration process, which removes particulates from the cooled raw fuel gas at up to 600{degree}C is the first stage of gas cleaning prior to desulphurization and ammonia removal processes. The dust concentration in the fuel gas downstream of the sorbent processes would be much lower than for the hot gas filtration stage and would have a lower sulphur content and possibly reduced chlorine concentration. The main aim of this project is to define the requirements for a hot gas filter for dedusting fuel gas under these conditions, and to identify a substantially simpler and more cost effective solution using ceramic or metal barrier filters.

Solid gas reaction phase diagram under high gas pressure

International Nuclear Information System (INIS)

Ishizaki, K.

1992-01-01

This paper reports that to evaluate which are the stable phases under high gas pressure conditions, a solid-gas reaction phase diagram under high gas pressure (HIP phase diagram) has been proposed by the author. The variables of the diagram are temperature, reactant gas partial pressure and total gas pressure. Up to the present time the diagrams have been constructed using isobaric conditions. In this work, the stable phases for a real HIP process were evaluated assuming an isochoric condition. To understand the effect of the total gas pressure on stability is of primary importance. Two possibilities were considered and evaluated, those are: the total gas pressure acts as an independent variable, or it only affects the fugacity values. The results of this work indicate that the total gas pressure acts as an independent variable, and in turn also affects the fugacity values

Northwest Asia - gas market outlook: LNG vs. pipeline gas

International Nuclear Information System (INIS)

Keun Wook Paik

1996-01-01

The share of natural gas in Northeast Asia's energy mix is quite low despite that the region currently dominates the world LNG trade. In the long term, the region's rapid expansion of gas demand in the coming decades looks very likely, but the LNG dominance in the region's gas market will collapse in parallel with the introduction of a long distance pipeline gas. The most likely timing of pipeline gas introduction in Northeast Asian gas market seems to be during the second half of the next decade. (Author)

Gas manufacture

Energy Technology Data Exchange (ETDEWEB)

Fell, J W

1915-05-03

Retorts for the distillation of shale or coal for the production of oil or illuminating-gas are heated by gas from a generator or a gas-holder, and a portion of the gas from the flue leading to the heating-flues is forced by a steam jet through a by-pass and is injected into the bottom of the retorts. If the gas to be admitted to the retort is cold, it is first heated.

Treatment of Gas

Science.gov (United States)

... Funding IFFGD Symposium reports Industry Council Contact Us Treatment of Gas You are here: Home Symptoms & Causes Intestinal Gas ... Controlling Intestinal Gas Foods That May Cause Gas Treatment of Gas Tips on Controlling Gas Adapted from IFFGD Publication # ...

78 FR 11638 - Michigan Consolidated Gas Company, DTE Gas Company, DTE Gas Company; Notice of Petition

Science.gov (United States)

2013-02-19

... corporate name change from MichCon to DTE Gas, and pursuant to section 284.123 of the Commissions... Gas Company (DTE Gas) filed to institute a name change to both itself from MichCon to DTE Gas and to...

Natural Gas

OpenAIRE

Bakar, Wan Azelee Wan Abu; Ali, Rusmidah

2010-01-01

Natural gas fuel is a green fuel and becoming very demanding because it is environmental safe and clean. Furthermore, this fuel emits lower levels of potentially harmful by-products into the atmosphere. Most of the explored crude natural gas is of sour gas and yet, very viable and cost effective technology is still need to be developed. Above all, methanation technology is considered a future potential treatment method for converting the sour natural gas to sweet natural gas.

Hydrocarbons in sediments adjacent to a gas and condensate development and production platform in northwestern Australia

International Nuclear Information System (INIS)

Fischer, S.J.; Alexander, R.; Kagi, R.I.

1994-01-01

In northwestern Australia during the period of 1983 to 1991, 23 wells were drilled from a gas/condensate production platform to the producing formation approximately 3000 m below the sea bed. Low toxicity water-based drilling muds formulated with hydrogenated kerosenes were used, with the resultant formation cuttings being legally discharged into the ocean. To study the fate of hydrocarbons associated with the cuttings, sea-floor samples were collected along two perpendicular transects from the platform. The first extended 10 km in the prevailing direction of the current and the other to 1.2 km. Subsequently, samples have been collected from one of these sites on two occasions, first one year and secondly two years after the initial collection. Samples collected from directly under the platform cuttings chute contained the highest hydrocarbon concentrations, determined gravimetrically, of 75000 mg/kg, decreasing to approximately 40 mg/kg within 800 m in the direction of the prevailing current. Concentrations in the more remote samples were determined by GC and decreased gradually to be barely discernible above background at less than 0.01 mg/kg at 10 km from the platform. This suite of samples provided an excellent opportunity to study the progress of hydrocarbon biodegradation as it occurs in the marine environment. Analysis by GC-FID, GC-MS and GC-FTIR revealed a number of features. For example, the extent of biodegradation and weathering with increasing distance from the platform, and the half life for biodegradation of total hydrocarbons appears to be approximately one year. The hydrocarbon components of the sediments are mainly from the drilling mud with minor contributions from the formation fluids

78 FR 38309 - Northern Natural Gas Company; Southern Natural Gas Company, L.L.C.; Florida Gas Transmission...

Science.gov (United States)

2013-06-26

... Natural Gas Company; Southern Natural Gas Company, L.L.C.; Florida Gas Transmission Company, LLC; Notice of Application Take notice that on June 4, 2013, Northern Natural Gas Company (Northern), 1111 South 103rd Street, Omaha, Nebraska 68124; on behalf of itself, Southern Natural Gas Company, L.L.C., and...

Gas engine supplied with fermentation gas

Energy Technology Data Exchange (ETDEWEB)

Cupial, K

1978-01-01

A CH/sub 4/-rich fermentation gas from the waste-treatment plant at Czestochowa is used as fuel to drive the generating set composed of an electric generator and a piston diesel engine adapted to operation with the fermentation gas. The adaption involved the use of a classical car ignition installation instead of the injection pumps and injector. The gas contains approximately CH/sub 4/ 60, CO/sub 2/ 32, N 5, and H 3 volume%.

Gas retorts: gas manufacture, process for distillation, destructive

Energy Technology Data Exchange (ETDEWEB)

Bell, J

1874-05-23

In apparatus for distilling shale, coal, etc. for making oil and gas, tubular retorts are supported horizontally in a chamber by plates from a brick setting and are heated partly by jets of gas from a pipe supplied through a cock from a gas holder, and partly by the waste gases from a furnace, which heats gas retorts placed in a chamber, air being supplied beneath the grate by a fan.

Gas supply planning for new gas-fired electricity generation facilities

International Nuclear Information System (INIS)

Slocum, J.C.

1990-01-01

This paper explores several key issues in gas supply planning for new gas fired electric generation facilities. This paper will have two main sections, as follows: developing the gas supply plan for a gas-fired electricity generation facility and exploring key gas supply contract pricing issues

Metals from the ritual site of Shaitanskoye Ozero II (Sverdlovsk Oblast, Russia

Directory of Open Access Journals (Sweden)

Nikolaevna Korochkova, Olga

2010-12-01

Full Text Available The present article describes materials from the ritual site of Shaitanskoye Ozero II, Sverdlovsk Oblast. Few excavations carried out at the site measuring less than 240 sq. m in size, yielded more than 160 bronze artifacts: utensils, weapons, rolled copper ornaments, and abundant smelting and casting waste. Apart from Seima-Turbino (celts and laminar knives and Eurasian types (daggers with cast hilts, truncated knives with guards, fluted bracelets and rings, several metal artifacts were revealed manufactured in the style of the Samus-Kizhirovo tradition. Bronze artifacts, stone knives and scrapers, and numerous arrowheads are accompanied by ceramics of the Koptyaki type. Metals use mainly a copper-tin alloy. This assemblage is shown to be relevant to the local tradition of metalworking, which, in this particular region, was comparatively ancient having been left uninterrupted by the rapid migrations of the Seima-Turbino people. In addition, the assemblage indicates the sources from which post-Seima artifacts reached the Alakul people. These artifacts may also have been linked with a large metalworking center located in the Middle Urals.

Este artículo describe los materiales del sitio ritual de Shaitanskoye Ozero II, Provincia de Sverdlovsk. Las reducidas excavaciones emprendidas en el lugar con superficie inferior a los 240 m² han entregado más de 160 objetos de bronce: utensilios, armas, adornos en espiral de cobre y abundantes residuos de la fusión y el trabajo del metal. Además de tipos Seima-Turbino (hachas tubulares y cuchillos planos y Euroasiáticos (puñales de mango fundido, cuchillos con empuñadura de lengüeta, brazaletes y anillos acanalados, varios artefactos metálicos resultaron manufacturados según el estilo de la tradición Samus-Kizhirovo. Los artefactos de bronce, los líticos (cuchillos, raspadores y numerosas puntas de flecha están acompañados por cerámicos de tipo Koptyaki. El metal es

Study of effect of slime processed by ultrasonic on flotation reagent

Energy Technology Data Exchange (ETDEWEB)

Kang, W.; Wang, H.; Hu, J. [Heilongjiang Institute of Science and Technology, Harbin (China)

2006-12-15

The changes of wetting heat, oil film thickness, contact angle and absorptive capacity of slime and kerosene before and after ultrasonic treatment were studied by Setaram calorimeter, DCAT21 gauge and a light meter. Batch flotation tests were made. The results show that: the wetting heat from slime and kerosene increases after ultrasonic treatment by 45.85%; the average oil film thickness is reduced by 38.84%; the contact angle of slime and kerosene decreases by 33.56{sup o}; and the absorptive capacity of slime in kerosene decreases by 30.40%. The consumption of flotation reagent after ultrasonic treatment was reduced by 75% while the yield of clean coal was the same. The study shows that ultrasonic treatment decreases the consumption of reagent and increases the efficiency and selectivity of flotation. 8 refs., 3 figs., 4 tabs.

Gas-particle interactions in dense gas-fluidised beds

NARCIS (Netherlands)

Li, J.; Kuipers, J.A.M.

2003-01-01

The occurrence of heterogeneous flow structures in gas-particle flows seriously affects gas¿solid contacting and transport processes in dense gas-fluidized beds. A computational study, using a discrete particle method based on Molecular Dynamics techniques, has been carried out to explore the

Inefficient charging for delivered gas by local gas distributors

Directory of Open Access Journals (Sweden)

Siniša Bikić

2005-10-01

Full Text Available In this region, especially in Serbia, common belief is that local distributors of gas used by households don’t charge for gas properly. It is suspected that there are two sources for improper ways of gas charging. Local distributors charge for delivered gas only, according to flow rat but not according to gas quality. It is usual that local distributors deliver gas of different quality than one signed in contract. In this work will be considered only one of aspects inefficient charging for delivered gas by local gas distributors, which is connected to variable atmospheric pressure. There is doubt, that local distributors make mistakes during accounting for delivered gas to costumers in regard atmospheric pressure. At the beginning of every investigation, problem has to be located and recognized. Authors are going to collect as much as possible available data, to elaborate and analyze data by scientific methods and to represent conclusions. So, the aim of this work is to diagnose current state and to approve or disapprove above mentioned suspicions. In our region this theme is very interesting, both because of energy efficiency and air pollution control. In this way both consumer and distributor will know, how mush energy they have really spent.

Natural gas trends

International Nuclear Information System (INIS)

Anderson, A.

1991-01-01

This book provides data on many facets of the natural gas industry. Topics include: Canadian, Mexican; US natural gas reserves and production; Mexican and US natural gas consumption; market conditions for natural gas in the US; and Canadian natural gas exports

Development of synthetic gasoline production process

Energy Technology Data Exchange (ETDEWEB)

Imai, T; Fujita, H; Yamada, K; Suzuki, T; Tsuchida, Y

1986-01-01

As oil deposits are limited, it is very important to develop techniques for manufacturing petroleum alternatives as substitute energy sources to brighten the outlook for the future. The Research Association for Petroleum Alternatives Development (RAPAD) in Japan is engaged in the research and development of production techniques for light hydrocarbon oils such as gasoline, kerosene, and light oil from synthesis gas (CO, H/sub 2/) obtained from the raw materials of natural gas, coal, etc. Regarding the MTG process of synthesizing gasoline via methanol from synthesis gas and the STG process of directly synthesizing gasoline from synthesis gas, Cosmo Oil Co., Ltd. and Mitsubishi Heavy Industries, Ltd., members of RAPAD, have sought jointly to develop catalysts and processes. As a result of this co-operation, the authors have recently succeeded in developing a new catalyst with a long life span capable of providing a high yield and high selectivity. Additionally, the authors are currently on the verge of putting into effect a unique two-step STG process of synthesizing high octane gasoline via dimethyl ether, referred to as the AMSTG process.

Gas production strategy of underground coal gasification based on multiple gas sources.

Science.gov (United States)

Tianhong, Duan; Zuotang, Wang; Limin, Zhou; Dongdong, Li

2014-01-01

To lower stability requirement of gas production in UCG (underground coal gasification), create better space and opportunities of development for UCG, an emerging sunrise industry, in its initial stage, and reduce the emission of blast furnace gas, converter gas, and coke oven gas, this paper, for the first time, puts forward a new mode of utilization of multiple gas sources mainly including ground gasifier gas, UCG gas, blast furnace gas, converter gas, and coke oven gas and the new mode was demonstrated by field tests. According to the field tests, the existing power generation technology can fully adapt to situation of high hydrogen, low calorific value, and gas output fluctuation in the gas production in UCG in multiple-gas-sources power generation; there are large fluctuations and air can serve as a gasifying agent; the gas production of UCG in the mode of both power and methanol based on multiple gas sources has a strict requirement for stability. It was demonstrated by the field tests that the fluctuations in gas production in UCG can be well monitored through a quality control chart method.

Current gas storage R and D programmes at Gas Research Institute

International Nuclear Information System (INIS)

Shikari, Y.A.

1990-01-01

The Gas Research Institute (GRI) is currently involved in the development of concepts aimed at an enhancement of natural gas service to the consumer. In order to maintain the attractiveness of the gas options to industrial consumers and to reinforce the ''value-in-use'' of natural gas to residential as well as commercial customers, it is essential to develop efficient, economical, and safe means of reducing the ''cost-of-service'', including that of natural gas storage in underground formations. Specifically, research and development (R and D) is needed to explore ways to better utilize existing storage fields and also to develop new storage facilities at minimum cost. GRI is currently sponsoring research projects aimed at controlling gas migration in underground gas storage reservoirs, reducing base (or cushion) gas requirements, understanding the gas-gas phase mixing behaviour via laboratory experiments and reservoir models, developing cost-effective gas separation processes using membranes, and optimizing the operation and maintenance (O and M) costs of underground gas storage operations. This paper provides an overview of the GRI's Gas Storage R and D Programme and highlights key results achieved to date for selected research projects. (author). 16 refs, 6 figs, 3 tabs

Centrifugal gas separator

Energy Technology Data Exchange (ETDEWEB)

Sakurai, M

1970-03-27

A centrifugal gas separator of a highly endurable construction and with improved gas sealing qualities utilizes a cylincrical elastic bellows or similar system in cooperation with a system of dynamic pressure operable gas seals as means for removing separated gases from the interior of the rotor drum, collecting the separated gases in their respective separated gas chambers defined by the corresponding bellows and their supporting stationary wall members, gas seals and rotor end caps, and means for discharging to the exterior of the surrounding cylindrical wall member the gaseous components from their respective separated gas chambers. In the vicinity of the rotary drum motor is a mixed gas chamber and means for providing the gas mixture along a co-axial passage into the rotary drum chamber. Orifices are bored into the end caps of the rotary drum to direct the separated gases into the aforementioned separated gas chambers which, through the action of the gas seals, freely slide upon the rotating drum to collect and thereafter discharge the thus separated gases. Therefore, according to the present invention, helium gas used to prevent separated gas remixture is unnecessary and, furthermore, the gas seals and elastic bellows means provide an air-tight seal superior to that of the contact sealing system of the former art.

Gas Composition Sensor for Natural Gas and Biogas

NARCIS (Netherlands)

Boersma, A.; Sweelsen, J.; Blokland, H.

2016-01-01

The calorific value of energetic gasses is an important parameter in the quality assessment of gas steams, and can be calculated from the chemical composition of the gas. An array of capacitive sensor electrodes was developed, each functionalized with a gas responsive coating to measure the

N2 gas station and gas distribution system for TLD personnel monitoring gas based semi-automatic badge readers

International Nuclear Information System (INIS)

Chourasiya, G.; Pradhan, S.M.; Kher, R.K.; Bhatt, B.C

2003-01-01

Full text: New improvised hot gas based Auto TLD badge reader has several advantages over the earlier contact heating based manual badge reader. It requires constant supply of N 2 gas for its operation; The gas supplied using replaceable individual gas cylinders may have some safety hazards in their handling. It was therefore considered worthwhile to setup a N 2 gas assembly/ station outside the lab area and to bring regulated gas supply through network of tubes with proper regulation to the individual readers. The paper presents detailed description of the gas station and distribution system. The system is quite useful and offers several practical advantages for readout of TLD badges on the semiautomatic badge readers based on gas heating. Important advantage from dosimetric point of view is avoidance of gas flow rate fluctuations and corresponding variations in TL readouts

Life cycle water consumption for shale gas and conventional natural gas.

Science.gov (United States)

Clark, Corrie E; Horner, Robert M; Harto, Christopher B

2013-10-15

Shale gas production represents a large potential source of natural gas for the nation. The scale and rapid growth in shale gas development underscore the need to better understand its environmental implications, including water consumption. This study estimates the water consumed over the life cycle of conventional and shale gas production, accounting for the different stages of production and for flowback water reuse (in the case of shale gas). This study finds that shale gas consumes more water over its life cycle (13-37 L/GJ) than conventional natural gas consumes (9.3-9.6 L/GJ). However, when used as a transportation fuel, shale gas consumes significantly less water than other transportation fuels. When used for electricity generation, the combustion of shale gas adds incrementally to the overall water consumption compared to conventional natural gas. The impact of fuel production, however, is small relative to that of power plant operations. The type of power plant where the natural gas is utilized is far more important than the source of the natural gas.

Coalbed gas development

International Nuclear Information System (INIS)

Anon.

1992-01-01

This book includes: Overview of coalbed gas development; Coalbed gas development in the West Coalbed gas development on Indian lands; Multi-mineral development conflicts; Statutory solutions to ownership disputes; State and local regulation; Environmental regulations; Status of the section 29 tax credit extension; Using the section 29 credit; Leasing coalbed gas prospects; Coalbed gas joint operating agreements and Purchase and sale agreements for coalbed gas properties

Norwegian Natural Gas. Liberalization of the European Gas Market

International Nuclear Information System (INIS)

Austvik, Ole Gunnar

2003-01-01

Leading abstract. This book focuses on issues that are important for Norway as a major gas exporter and to the development of a liberalized European market. Chapter 2 explains main features of the European gas market. Natural gas is sold in regional markets with independent pricing structure and particularities. In Europe, this has led to large investments for the producers and long-term contracts. The strong market growth and EU's actions to liberalize the market may change this. The organization of the Norwegian gas production and sale is discussed, as well as the reorganization taking place in 2001. Pricing mechanisms are discussed in Chapter 3, both in the ''old'' / existing structure and how a liberalization of the market may change price formation. The increased importance of energy taxation in EU countries is covered in Chapter 4. Even though natural gas is the most environmentally friendly of the fossil fuels, the use of natural gas may be taxed far harder in the future. The report discusses price effects of such a development. Chapter 5 discusses whether or not a gas producer, like Norway, necessarily must earn a resource rent. With the use of economic theory for exhaustible resources it is shown how prices to consumers may increase at the same time as prices to producers drop, where the difference is made up by higher gas taxes to the consuming countries. Transportation of natural gas involves considerable scale advantages and there are often scope advantages from production, storage and sale, as well. Chapter 6 discusses how competition and regulation may influence the functioning and social efficiency of the market, and the concentration of market power. When companies become large, they may exploit market power, supported by the authorities of their respective countries. Chapter 7 focuses on regulatory challenges for the EU, and how the transporters may change between conflicting and cooperation with the EU. Chapter 8 focuses on schedules for

Agricultural demands for natural gas and liquified petroleum gas in the USA

International Nuclear Information System (INIS)

Uri, N.D.; Gill, M.

1992-01-01

This study endeavours to determine whether farmers adjust their consumption of natural gas and liquefied petroleum gas in response to changes in the unit price of energy. A demand model is specified and estimated. The conclusions suggest that the unit price of natural gas (liquefied petroleum gas) is a factor impacting the quantity of natural gas (liquefied petroleum gas) demanded by farmers, but there is no indication that other types of energy are substitutes for natural gas or liquefied petroleum gas. Additionally, the number of acres irrigated is an important factor driving the demand for natural gas and liquefied petroleum gas. Finally, the estimated models of natural gas and liquefied petroleum gas demand were structurally stable over the period 1971-1989. (author)

Efficiency and exhaust gas analysis of variable compression ratio spark ignition engine fuelled with alternative fuels

Energy Technology Data Exchange (ETDEWEB)

Seshaiah, N. [Mechanical Engineering Department, M.I.T.S, Madanapalle, Angallu-517325, A.P. (India)

2010-07-01

Considering energy crises and pollution problems today, investigations have been concentrated on decreasing fuel consumption by using alternative fuels and on lowering the concentration of toxic components in combustion products. In the present work, the variable compression ratio spark ignition engine designed to run on gasoline has been tested with pure gasoline, LPG (Isobutene), and gasoline blended with ethanol 10%, 15%, 25% and 35% by volume. Also, the gasoline mixed with kerosene at 15%, 25% and 35% by volume without any engine modifications has been tested and presented the result. Brake thermal and volumetric efficiency variation with brake load is compared and presented. CO and CO2 emissions have been also compared for all tested fuels.

Gas Production Strategy of Underground Coal Gasification Based on Multiple Gas Sources

Directory of Open Access Journals (Sweden)

Duan Tianhong

2014-01-01

Full Text Available To lower stability requirement of gas production in UCG (underground coal gasification, create better space and opportunities of development for UCG, an emerging sunrise industry, in its initial stage, and reduce the emission of blast furnace gas, converter gas, and coke oven gas, this paper, for the first time, puts forward a new mode of utilization of multiple gas sources mainly including ground gasifier gas, UCG gas, blast furnace gas, converter gas, and coke oven gas and the new mode was demonstrated by field tests. According to the field tests, the existing power generation technology can fully adapt to situation of high hydrogen, low calorific value, and gas output fluctuation in the gas production in UCG in multiple-gas-sources power generation; there are large fluctuations and air can serve as a gasifying agent; the gas production of UCG in the mode of both power and methanol based on multiple gas sources has a strict requirement for stability. It was demonstrated by the field tests that the fluctuations in gas production in UCG can be well monitored through a quality control chart method.

Future of gas

International Nuclear Information System (INIS)

Forbes, A.; Widdershoven, C.; Nicola, S.; Cragg, C.

2009-01-01

Two articles and two columns in this section on the future of natural gas. In the first article attention is paid to the possibility that large natural gas producers are setting up a cartel a la OPEC. Most experts argue that the structure of gas markets makes the gas business much less amenable to cartelisation than the oil business. If that is true, why are so many people in the gas industry afraid of a gas cartel? The second article focuses on the future role of North Africa in the supply of natural gas

Centrifugal gas separator

International Nuclear Information System (INIS)

Sakurai, Mitsuo.

1970-01-01

A centrifugal gas separator of a highly endurable construction and with improved gas sealing qualities utilizes a cylincrical elastic bellows or similar system in cooperation with a system of dynamic pressure operable gas seals as means for removing separated gases from the interior of the rotor drum, collecting the separated gases in their respective separated gas chambers defined by the corresponding bellows and their supporting stationary wall members, gas seals and rotor end caps, and means for discharging to the exterior of the surrounding cylindrical wall member the gaseous components from their respective separated gas chambers. In the vicinity of the rotary drum motor is a mixed gas chamber and means for providing the gas mixture along a co-axial passage into the rotary drum chamber. Orifices are bored into the end caps of the rotary drum to direct the separated gases into the aforementioned separated gas chambers which, through the action of the gas seals, freely slide upon the rotating drum to collect and thereafter discharge the thus separated gases. Therefore, according to the present invention, helium gas used to prevent separated gas remixture is unnecessary and, furthermore, the gas seals and elastic bellows means provide an air-tight seal superior to that of the contact sealing system of the former art. (K.J. Owens)

Visualization of gas dissolution following upward gas migration in porous media: Technique and implications for stray gas

Science.gov (United States)

Van De Ven, C. J. C.; Mumford, Kevin G.

2018-05-01

The study of gas-water mass transfer in porous media is important in many applications, including unconventional resource extraction, carbon storage, deep geological waste storage, and remediation of contaminated groundwater, all of which rely on an understanding of the fate and transport of free and dissolved gas. The novel visual technique developed in this study provided both quantitative and qualitative observations of gas-water mass transfer. Findings included interaction between free gas architecture and dissolved plume migration, plume geometry and longevity. The technique was applied to the injection of CO2 in source patterns expected for stray gas originating from oil and gas operations to measure dissolved phase concentrations of CO2 at high spatial and temporal resolutions. The data set is the first of its kind to provide high resolution quantification of gas-water dissolution, and will facilitate an improved understanding of the fundamental processes of gas movement and fate in these complex systems.

Flue gas emissions from gas-fired cogeneration units <25 MWe

International Nuclear Information System (INIS)

Nielsen, M.; Wit, J. de

1997-01-01

A total of 900 MW e gas driven combined heat and power (CHP) has now been established in Denmark based on gas engines and gas turbine units less than 25 MW e each. Of the 900 MW e approx. 750 MW e are based on gas engines. Biogas is used as fuel for some 32 MW e of these. Emission limits for NO x and CO are 650 mg/nm 3 (ref. 5% O 2 and electrical efficiency 30% LCV). There is at present no limit for unburned hydrocarbons (UHC) for gas engines or gas turbines. The average emission of unburned hydrocarbons for the Danish gas engine driven CHP units is equal to approx. 3,5% of the fuel used. It is the target of this report to provide the basis for evaluating the planned UHC limit and possible adjustments of the present limit for NO x emission. The average NO x emission from gas turbines slightly exceeds the NO x emission from gas engines. This is due to a number of older gas turbines. Modern gas turbines can achieve significantly lower NO x emission compared to engines. The NO x emission from biogas driven engines is significantly higher than that of natural gas driven units. This is mainly due to NO x -unfavourable engine settings and the use of older units, as there are no legislation concerning NO x emission for the majority of these biogas driven units. The emission of CO and UHC is lower from gas turbines than from gas engines. The NO x emission can be reduced by SCR Catalyst systems. In Denmark 3 gas engine installations use this commercially available technology. Oxidation catalyst for UHC reduction at modern gas engine installations has proven relatively unsuccesful in Denmark until now. Only limited reductions are achieved and many catalysts are toxificated in less than 100 hours of operation. However, long-term field testing of promising UHC reducing catalysts is now being made. UHC reduction by incineration is at the prototype stage. No such plant has yet been set up in Denmark. (Abstract Truncated)

National Gas Hydrate Program Expedition 01 offshore India; gas hydrate systems as revealed by hydrocarbon gas geochemistry

Science.gov (United States)

Lorenson, Thomas; Collett, Timothy S.

2018-01-01

The National Gas Hydrate Program Expedition 01 (NGHP-01) targeted gas hydrate accumulations offshore of the Indian Peninsula and along the Andaman convergent margin. The primary objectives of coring were to understand the geologic and geochemical controls on the accumulation of methane hydrate and their linkages to underlying petroleum systems. Four areas were investigated: 1) the Kerala-Konkan Basin in the eastern Arabian Sea, 2) the Mahanadi and 3) Krishna-Godavari Basins in the western Bay of Bengal, and 4) the Andaman forearc Basin in the Andaman Sea.Upward flux of methane at three of the four of the sites cored during NGHP-01 is apparent from the presence of seafloor mounds, seismic evidence for upward gas migration, shallow sub-seafloor geochemical evidence of methane oxidation, and near-seafloor gas composition that resembles gas from depth.The Kerala-Konkan Basin well contained only CO2 with no detectable hydrocarbons suggesting there is no gas hydrate system here. Gas and gas hydrate from the Krishna-Godavari Basin is mainly microbial methane with δ13C values ranging from −58.9 to −78.9‰, with small contributions from microbial ethane (−52.1‰) and CO2. Gas from the Mahanadi Basin was mainly methane with lower concentrations of C2-C5 hydrocarbons (C1/C2 ratios typically >1000) and CO2. Carbon isotopic compositions that ranged from −70.7 to −86.6‰ for methane and −62.9 to −63.7‰ for ethane are consistent with a microbial gas source; however deeper cores contained higher molecular weight hydrocarbon gases suggesting a small contribution from a thermogenic gas source. Gas composition in the Andaman Basin was mainly methane with lower concentrations of ethane to isopentane and CO2, C1/C2 ratios were mainly >1000 although deeper samples were compositions range from −65.2 to −80.7‰ for methane, −53.1 to −55.2‰ for ethane is consistent with mainly microbial gas sources, although one value recorded of −35.4‰ for propane

Asian gas

International Nuclear Information System (INIS)

Masuda, T.

1990-01-01

This paper reports on natural gas which now appears ready to take a leading role on the world energy stage. Demand for natural gas, and specifically LNG, will be strong throughout the world, particularly in Asia. Indonesia and Malaysia will become much more dependent on natural gas in the Asian market. In Thailand, where remarkable economic growth has been fueled by imported oil and domestically produced natural gas, LNG may soon have to be imported from neighboring countries. The author sees Thailand's imports of natural gas increasing from 1.5 to 4.5 million tons annually. Similarly, Korea's imports of LNG will rise from 2 to 8 million tons between 1987 and 2000. In Japan, energy demand is expected to increase at an even faster rate in the 1990s. Given the opposition to nuclear power generation and growing concern about the greenhouse effect, it is likely that LNG will satisfy a major portion of Japan's increasing demand for energy. Japanese gas companies are studying the possibility of establishing a national pipeline network to move gas beyond metropolitan areas

Alternative ways to transport natural gas; Transporte alternativo de gas natural

Energy Technology Data Exchange (ETDEWEB)

Moura, N.R.; Campos, F.B. [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES)

2008-07-01

The Brazilian energy matrix has been showing a huge increase in the demand of natural gas due mainly to industries and power plants. Today the Brazilian gas market is supplied with gas produced by PETROBRAS and imported from Bolivia. To increase the Brazilian gas supply, on the short and middle term, PETROBRAS will import LNG (liquefied natural gas) and exploit the new offshore fields discovered on the pre-salt area. The only proven technology available today to bring this offshore gas to the market is the pipeline, but its costs for the pre-salt area are high enough to keep the solution economically attractive. So, PETROBRAS are evaluating and developing alternative ways to transport offshore gas, such as LNG, CNG (Compressed Natural Gas), GTS (Gas-to-Solids or Natural Gas Hydrates) and ANG (Adsorbed Natural Gas). Using information available in the literature, this paper analyses the main concepts of CNG and LNG floating unities. This paper also presents the PETROBRAS R and D results on ANG and GTS aiming at offshore application. (author)

La imagen-pantalla: materialidad, artefacto, gesto técnico

Directory of Open Access Journals (Sweden)

Sergio Martínez Luna

2016-11-01

Full Text Available The article explores the convergence between image and screen within contemporary visual culture. Image itself and technical support are identified through the image-screen. This identification can be taken as the last step of a process of invisibilization of the forms of mediation of images, by naturalizing and detracting them from critical analysis, within a certain ideology of dematerialization. The article pays attention to material dimensions of image-screen in order to develop new possibilities for the critique of representation, not just focused on the discursive. Based on the recognition of the materiality of signs and codes the article aims to understand the image-screen as artefact, a knot of active matter and meaning, as well as the opportunity to re-politicize technical gestures.

Upgrading of reformate gas for different applications with focus on small-scale hydrogen production

Energy Technology Data Exchange (ETDEWEB)

Jannasch, Anna-Karin; Silversand, Fredrik [CATATOR AB, Lund (Sweden)

2004-12-01

Hydrogen gas or hydrogen rich gas is today used in many different applications, i.e. as fuel in fuel cells or additive in vehicle fuel (i.e. hythane) and as reagent or reducing agent in different industrial product lines. The majority of the hydrogen is produced either via electrolysis or reformation, where this work has entirely been focused on the latter alternative. The overarching aims of this project have been to demonstrate the need for reformate purification for different applications, and then, to investigate different available methods that can be used in order to enable the requested gas clean-up. The different purification methods have been examined with respect to parameters such as operating conditions (temperature, pressure), impurity tolerance, size, weight and cost. Another goal of the project has been to investigate how the reformer fuel type used influences the reformate gas quality and hence, the need for gas purification before the reformate can be fed to e.g. a low temperature polymer membrane fuel cell (PEMFC). For this reason, some experimental work has been performed. First, analysis of the reformate gas composition when natural gas, LPG, gasoline, diesel, kerosene (low and high S-concentration (i.e. JP8)) and ethanol have been processed. The reformation tests were carried out in a small scale reformer unit ({approx} 1 kW H{sub 2}) including Catator's catalyst formulations developed for the steam reforming, the water gas shift and the preferential oxidation reaction, respectively. Verification tests, with synthetic gas blends, including different potential reformate impurities, and with real reformate gas were thereafter performed with a commercial 4-cell PEMFC stack (3-5 W). Finally, some examination and also to some extent further development of Catator's existing gas purification units were made, i.e. chemical (WGS, PROX) and physical (regenerative adsorption). The Pd-alloy membrane seems to be the obvious choice of purification

America: AGA [American Gas Association] initiative aims to boost gas demand

International Nuclear Information System (INIS)

Fraser, K.M.

1992-01-01

This article focuses on the aim of the American Gas Association to increase natural gas demand in the key areas of gas electric generation, natural gas vehicles, gas cooling, and conversion of oil burning facilities, electric water heaters and household appliances such as space heating, stoves, washers and lighting. The need to improve the reliability of natural gas supplies is discussed. It is anticipated that natural gas will not replace coal as the main energy source for power generation, but that it will help utilities to meet environmental regulations. (UK)

BC gas takes new approach to gas supply optimization

International Nuclear Information System (INIS)

Cawdery, J.; Swoveland, C.

1992-01-01

Wide-ranging changes have taken place in the US and Canada since the mid-1980s in the way that local gas distribution utilities and large industrial customers contract for their gas supplies. This paper reports that these changes have been brought about by open-access policies, the intent of which was to allow customers more latitude to make their gas purchase and transportation arrangements and to improve the access of shippers to available gas transmission capacity. The effects of the new open-access regime have been profound on both sides of the border. More than 70% of North American gas supplies are now sold under unbundled arrangements in which gas supply is contracted under separate commodity and transportation agreements. For local distribution utilities, the numbers of potential supply options have become extremely large. Analysis of these options has become increasingly complex with the need to take account of complicated contract provisions, a wider range of storage options and swap arrangements with other utilities, opportunities for some customers to purchase gas directly and uncertainty about future demand, prices and supplier reliability

Natural gas and Brazilian energetic matrix; Gas natural no Brasil

Energy Technology Data Exchange (ETDEWEB)

Moraes, Ricardo Luchese de [White Martins S.A., Rio de Janeiro, RJ (Brazil)

1997-07-01

Recent projection of the market in global scale shows a tendency in natural gas using replacing mostly the fuel oil. Its market share well increase from 21.1% in 1994 to 24.0% in 2010. The annual energetic use will reach 29.23 x 10{sup 9} Gcal in 2010 (8990 million Nm{sup 3} natural gas/day) versus 18.90 x 10{sup 9} Gcal in 1994 (5810 million Nm{sup 3} natural gas/day). For Brazil, its consumption will increase from 8.7 million Nm{sup 3} natural gas/day in 1994 to 35.9 million Nm{sup 3} natural gas/day in 2010. Projects like Brazil-Bolivia natural gas pipeline, will supply 18 million Nm{sup 3} natural gas/day, which expected to start-up before the year 2000. This projects will supply the Brazilian southern regions, that do not consume natural gas at the current moment. Although there are many different kind of natural gas consumption in the industry this paper presents the technical and economical estimate of the injection in the blast furnace operating with coke or charcoal. The process simulation is done assisted by math modeling developed by White Martins/Praxair Inc. (author)

The impact of northern gas on North American gas infrastructure

International Nuclear Information System (INIS)

Letwin, S.

2004-01-01

The three business units that Enbridge operates are crude oil pipelines; natural gas liquids (NGL) transportation; and gas transmission and distribution. The need for more infrastructure will increase as the demand for natural gas increases. This presentation outlined the issues that surround and sometimes impede infrastructure development. It also emphasized the need for northern gas supply at a time when conventional natural gas supplies are decreasing and demand is growing. Additional LNG supply is required along with new supply from Alaska, Mackenzie Delta and the east coast. The issue of a secure source of supply was discussed along with northern gas expectations. It is expected that Mackenzie Delta gas (1.2 bcf/day) will be available by 2008 to 2010 and Alaska North Slope gas (4 bcf/day) will be available from 2012 to 2014. Gas demand by industrial, residential, commercial and power generation sectors across North America was illustrated. The challenge lies in creating infrastructure to move the supply to where it is most in demand. General infrastructure issues were reviewed, such as prices, regulatory streamlining, lead times, stakeholder issues and supporting infrastructure. 19 figs

Processing of coke oven gas. Primary gas cooling

Energy Technology Data Exchange (ETDEWEB)

Ullrich, H [Otto (C.) und Co. G.m.b.H., Bochum (Germany, F.R.)

1976-11-01

The primary cooler is an indispensable part of all byproduct processing plants. Its purpose is to cool the raw gas from the coke oven battery and to remove the accompanying water vapor. The greater part of the cooling capacity is utilized for the condensation of water vapor and only a small capacity is needed for the gas cooling. Impurities in the gas, like naphthalene, tar and solid particles, necessitate a special design in view of the inclination to dirt accumulation. Standard types of direct and indirect primary gas coolers are described, with a discussion of their advantages and disadvantages.

Natural gas participation on brazilian demand supply of liquefied petroleum gas

International Nuclear Information System (INIS)

Freitas Rachid, L.B. de

1991-01-01

Natural Gas Liquids Production, Liquefied Petroleum Gas (LPG) among them, has undergone a continuous growth and technological development until the first half of the eighties. This paper presents the natural gas processing activity development in Brazil, in the last 20 years, and the increasing share of LPG produced from natural gas in the supply of LPG domestic market. Possibilities of achieving greater shares are discussed, based on economics of natural gas processing projects. Worldwide gas processing installed capacity and LPG pricing tendencies, and their influence in the construction of new Natural Gas Processing Units in Brazil, are also discussed. (author)

Retained Gas Sampling Results for the Flammable Gas Program

International Nuclear Information System (INIS)

Bates, J.M.; Mahoney, L.A.; Dahl, M.E.; Antoniak, Z.I.

1999-01-01

The key phenomena of the Flammable Gas Safety Issue are generation of the gas mixture, the modes of gas retention, and the mechanisms causing release of the gas. An understanding of the mechanisms of these processes is required for final resolution of the safety issue. Central to understanding is gathering information from such sources as historical records, tank sampling data, tank process data (temperatures, ventilation rates, etc.), and laboratory evaluations conducted on tank waste samples

Retained Gas Sampling Results for the Flammable Gas Program

Energy Technology Data Exchange (ETDEWEB)

J.M. Bates; L.A. Mahoney; M.E. Dahl; Z.I. Antoniak

1999-11-18

The key phenomena of the Flammable Gas Safety Issue are generation of the gas mixture, the modes of gas retention, and the mechanisms causing release of the gas. An understanding of the mechanisms of these processes is required for final resolution of the safety issue. Central to understanding is gathering information from such sources as historical records, tank sampling data, tank process data (temperatures, ventilation rates, etc.), and laboratory evaluations conducted on tank waste samples.

National Gas Hydrate Program Expedition 01 offshore India; gas hydrate systems as revealed by hydrocarbon gas geochemistry

Science.gov (United States)

Lorenson, Thomas; Collett, Timothy S.

2018-01-01

The National Gas Hydrate Program Expedition 01 (NGHP-01) targeted gas hydrate accumulations offshore of the Indian Peninsula and along the Andaman convergent margin. The primary objectives of coring were to understand the geologic and geochemical controls on the accumulation of methane hydrate and their linkages to underlying petroleum systems. Four areas were investigated: 1) the Kerala-Konkan Basin in the eastern Arabian Sea, 2) the Mahanadi and 3) Krishna-Godavari Basins in the western Bay of Bengal, and 4) the Andaman forearc Basin in the Andaman Sea.Upward flux of methane at three of the four of the sites cored during NGHP-01 is apparent from the presence of seafloor mounds, seismic evidence for upward gas migration, shallow sub-seafloor geochemical evidence of methane oxidation, and near-seafloor gas composition that resembles gas from depth.The Kerala-Konkan Basin well contained only CO2 with no detectable hydrocarbons suggesting there is no gas hydrate system here. Gas and gas hydrate from the Krishna-Godavari Basin is mainly microbial methane with δ13C values ranging from −58.9 to −78.9‰, with small contributions from microbial ethane (−52.1‰) and CO2. Gas from the Mahanadi Basin was mainly methane with lower concentrations of C2-C5 hydrocarbons (C1/C2 ratios typically >1000) and CO2. Carbon isotopic compositions that ranged from −70.7 to −86.6‰ for methane and −62.9 to −63.7‰ for ethane are consistent with a microbial gas source; however deeper cores contained higher molecular weight hydrocarbon gases suggesting a small contribution from a thermogenic gas source. Gas composition in the Andaman Basin was mainly methane with lower concentrations of ethane to isopentane and CO2, C1/C2 ratios were mainly >1000 although deeper samples were exploration and occurs in a forearc basin. Each of these hydrate-bearing systems overlies and is likely supported by the presence and possible migration of gas from deeper gas-prone petroleum

Natural gas market review 2006 - towards a global gas market

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-07-01

Natural gas is essential to the world economy. Gas now accounts for almost a quarter of OECD primary energy requirements and is expected to become the second most important fuel in the world in the next decade. Industrial and residential consumers increasingly rely on natural gas to keep their houses warm, their lights on and their factories running. Meanwhile the gas industry itself has entered a new phase. Where gas used to be restricted to regional markets, it is now increasingly traded on a global scale. While gas production and transport requires long-term investment, now it is optimised on a short-term basis. Demand continues to grow, but local gas production has become much more expensive. How should we react? How will demand be satisfied? What changes are required to promote flexibility and trade? What are the implications for gas security, investment and interdependence? At stake is an opportunity to diversify supply and demand - but this goal is threatened by barriers to competition and investment. This book is the first of a new IEA publication series. It takes an unprecedented look at developments in natural gas to 2010, analysing not only the three IEA regions (Asia Pacific, North America and Europe) but also broader global trends, such as the interaction of pipeline gas with LNG which binds the regions together. The Review provides invaluable insights for understanding this dynamic market.

Natural gas market review 2006 - towards a global gas market

International Nuclear Information System (INIS)

2006-01-01

Natural gas is essential to the world economy. Gas now accounts for almost a quarter of OECD primary energy requirements and is expected to become the second most important fuel in the world in the next decade. Industrial and residential consumers increasingly rely on natural gas to keep their houses warm, their lights on and their factories running. Meanwhile the gas industry itself has entered a new phase. Where gas used to be restricted to regional markets, it is now increasingly traded on a global scale. While gas production and transport requires long-term investment, now it is optimised on a short-term basis. Demand continues to grow, but local gas production has become much more expensive. How should we react? How will demand be satisfied? What changes are required to promote flexibility and trade? What are the implications for gas security, investment and interdependence? At stake is an opportunity to diversify supply and demand - but this goal is threatened by barriers to competition and investment. This book is the first of a new IEA publication series. It takes an unprecedented look at developments in natural gas to 2010, analysing not only the three IEA regions (Asia Pacific, North America and Europe) but also broader global trends, such as the interaction of pipeline gas with LNG which binds the regions together. The Review provides invaluable insights for understanding this dynamic market

Investigation of Continuous Gas Engine CHP Operation on Biomass Producer Gas

DEFF Research Database (Denmark)

Ahrenfeldt, Jesper; Henriksen, Ulrik Birk; Jensen, Torben Kvist

2005-01-01

More than 2000 hours of gas engine operation with producer gas from biomass as fuel has been conducted on the gasification CHP demonstration and research plant, named “Viking” at the Technical University of Denmark. The gas engine is an integrated part of the entire gasification plant. The excess...... operates with varying excess of air due to variation in gas composition and thus stoichiometry, and a second where the excess of air in the exhaust gas is fixed and the flow rate of produced gas from the gasifier is varying. The interaction between the gas engine and the gasification system has been...... investigated. The engine and the plant are equipped with continuously data acquisition that monitors the operation including the composition of the producer gas and the flow. Producer gas properties and contaminations have been investigated. No detectable tar or particle content was observed...

Gas magnetometer

Science.gov (United States)

Walker, Thad Gilbert; Lancor, Brian Robert; Wyllie, Robert

2016-05-03

Measurement of a precessional rate of a gas, such as an alkali gas, in a magnetic field is made by promoting a non-uniform precession of the gas in which substantially no net magnetic field affects the gas during a majority of the precession cycle. This allows sensitive gases that would be subject to spin-exchange collision de-phasing to be effectively used for extremely sensitive measurements in the presence of an environmental magnetic field such as the Earth's magnetic field.

Natural gas marketing II

International Nuclear Information System (INIS)

Anon.

1988-01-01

This book covers all aspects of gas marketing, from the basic regulatory structure to the latest developments in negotiating agreements and locating markets. Topics include: Federal regulation of the gas industry; Fundamentals of gas marketing contracts; FERC actions encouraging competitive markets; Marketing conditions from the pipelines' perspective; State non-utility regulation of natural gas production, transportation, and marketing; Natural gas wellhead agreements and tariffs; Natural gas processing agreements; Effective management of producer's natural gas contracts; Producer-pipeline litigation; Natural gas purchasing from the perspective of industrial gas users; Gas marketing by co-owners: problems of disproportionate sales, gas balancing, and accounting to royalty owners; Alternatives and new directions in marketing

Venezuelan gas developments

International Nuclear Information System (INIS)

Michael, H.

1993-01-01

An overview is presented of the Venezuelan natural gas industry. The structure of PDVSA, the Petroleos de Venezuela Organization, its foreign and domestic affiliates, and its subsidiaries are discussed. Natural gas resources in Venezuela total 290 trillion cubic feet, and Venezuela's share of world, OPEC and latin American production and reserves are 1%, 11% and 26%, respectively for production and 3%, 6% and 49% for reserves. Venezuela's gas pipeline network, plants, production, and marketing are described. Natural gas production and demand forecasts to 2002 are presented. Gas resources are largely located in eastern Venezuela, and large volumes of natural gas non-associated with crude oil will start to become important in the Venezuelan natural gas industry. 19 figs

Reduction of gas flow nonuniformity in gas turbine engines by means of gas-dynamic methods

Science.gov (United States)

Matveev, V.; Baturin, O.; Kolmakova, D.; Popov, G.

2017-08-01

Gas flow nonuniformity is one of the main sources of rotor blade vibrations in the gas turbine engines. Usually, the flow circumferential nonuniformity occurs near the annular frames, located in the flow channel of the engine. This leads to the increased dynamic stresses in blades and as a consequence to the blade damage. The goal of the research was to find an acceptable method of reducing the level of gas flow nonuniformity as the source of dynamic stresses in the rotor blades. Two different methods were investigated during this research. Thus, this study gives the ideas about methods of improving the flow structure in gas turbine engine. On the basis of existing conditions (under development or existing engine) it allows the selection of the most suitable method for reducing gas flow nonuniformity.

USE OF MEMBRANE EMULSION SPAN 80 AND TOPO IN URANIUM EXTRACTION AND STRIPPING

Directory of Open Access Journals (Sweden)

Kris Tri Basuki

2017-01-01

Full Text Available ABSTRACT USE OF MEMBRANE EMULSION SPAN 80 AND TOPO IN URANIUM EXTRACTION AND STRIPPING. Membrane emulsion span 80 and TOPO used in uranium extraction and stripping has been done. The extraction was carried outby emulsion membrane H3PO4 in TOPO-Kerosene. The feed or external aqueous phase was uranium in  HNO3. The emulgator span-80 was used to obtain a stable emulsion membrane system. The influence factors were percentage of TOPO-Kerosene, time extraction,  molarity of external aqueous phase and  molarity of internal aqueous. After the emulsion membrane was formed, the extractionand stripping process was performed. The ratio volume feed : volume membrane phase equal to 1 : 1 and volume of 5 % TOPO-Kerosene : Volume 3 M H3PO4 equal 1 : 1 were used. The relative good yield were obtained at concentration of TOPO in Kerosene and 3 M H3PO4 was 5 %, molarity of internal aqueous phase equal to 1 M, molarity of external aqueous phase 3 M H3PO4 and time extraction equalto 10 minutes with the speed of emulsification was 8000 rpm. At this condition the extraction efficiency of uranium obtained was 97.8 %, the stripping efficiency 52.56 %, and the total efficiency was 53.80 %. Keywords: membrane emulsion, extraction, stripping, span 80, kerosene, uranium. ABSTRAK PENGGUNAAN MEMBRAN EMULSI SPAN 80 DAN TOPO UNTUK EKSTRASI DAN STRIPPING URANIUM. Telah dilakukan penelitian membran emulsi span 80 dan TOPO yang digunakan untuk ekstraksi uranium. Extraksi dengan membran emulsi H3PO4 dalam TOPO-Kerosen. Larutan umpan untuk fasa air eksternal adalah uranium dalam asam nitrat. Untuk memperoleh sistem emulsi yang stabil dipakai emulgator Span 80. Parameter yang berpengaruh adalah persen TOPO-Kerosene, molaritas fasa air internal H3PO4, molaritas fasa air eksternal HNO3 dan waktu ekstraksi. Setelah diperoleh membran emulsi, kemudian dilakukan proses ekstraksi dan stripping, dengan rasio volume umpan : volume membran sebesar 1 : 1; volume 5% TOPO-Kerose : volume 3M

Worldwide gas marketing

International Nuclear Information System (INIS)

Carson, M.M.

1994-01-01

Natural gas is an important source of energy throughout the world due to its availability and clean burning characteristics. From liquefied natural gas being shipped via tanker from Alaska to Japan, to natural gas via pipeline from Canada to the US, to inter-country natural gas shipment within the European continent, natural gas continues to expand and justify its place of honor in the world energy picture

Biodegradation waste of the stations service by Rhodococcus erythropolis ohp-al-gp

International Nuclear Information System (INIS)

Pucci, Oscar Hector; Acuna, Adrian Javier; Pucci, Graciela Natalia

2013-01-01

The strain Rhodococcus erythropolis ohp-al-gp was isolated from turbine oil contaminated soil from northern Santa Cruz province, Argentina. Because of its potential in bioremediation, the aim was to know the abilities for degradation of pure compounds and mixtures of hydrocarbons, as well as degradation in the presence and absence of diesel nitrogen measured by gas chromatography. The strain possesses the ability to use diesel, kerosene, lubricating oil, pristane, hexane, heptane, octane, pentadecane and hexadecane. R. erythropolis ohp-al-gp has excellent potential for bioremediation of hydrocarbons, which are conflictive as lubricating oils, their potential use in removing mud from washing engines or gas stations would be its most important application. The degradation rate in optimal culture conditions, gives it an additional advantage. It also has a low degradation in the absence of nitrogen, a frequent limiting factor in Patagonian soils.

Gas separating

Science.gov (United States)

Gollan, A.

1988-03-29

Feed gas is directed tangentially along the non-skin surface of gas separation membrane modules comprising a cylindrical bundle of parallel contiguous hollow fibers supported to allow feed gas to flow from an inlet at one end of a cylindrical housing through the bores of the bundled fibers to an outlet at the other end while a component of the feed gas permeates through the fibers, each having the skin side on the outside, through a permeate outlet in the cylindrical casing. 3 figs.

The Spanish gas industry

International Nuclear Information System (INIS)

Anon.

1993-01-01

The spanish gas industry has become one of the major actors in the gas sector of the European Economic Community. This paper pictures the spanish gas industry on the basis of a study by Sedigas, the spanish member of the International Gas Union (IGU). The main subjects described are structure of gas companies, natural gas supply, transport and storage, natural gas distribution networks, statistical data on natural gas consumption, manufactured gas and Liquefied Petroleum Gases (LPG) production-consumption in Spain. 7 figs., 10 tabs

Natural gas purchasing

International Nuclear Information System (INIS)

Freedenthal, C.

1993-01-01

In recent years, natural gas has gained new momentum because of changes in marketing and regulations. The gas industry has always received an inordinate amount of regulatory control starting at the well head where the gas is produced to the consuming burner tip. Regulations have drastically impacted the availability of gas. Changes in the marketing and regulations have made the natural gas market sensitive at the point of production, the well head. Now, with plentiful supply and ease of transportation to bring the gas from the producing fields to the consumer, natural gas markets are taking advantage of the changed conditions. At the same time, new markets are developing to take advantage of the changes. This section shows consumers, especially the energy planners for large buyers of fuel, the advantages, sources and new methods of securing natural gas supplies. Background on how natural gas is produced and marketed are given. This section lists marketing sources, regulatory agencies and information groups available to help buyers and consumers of this important fuel for US industries and residences. 7 figs., 8 tabs

Gas-Dynamic Methods to Reduce Gas Flow Nonuniformity from the Annular Frames of Gas Turbine Engines

Science.gov (United States)

Kolmakova, D.; Popov, G.

2018-01-01

Gas flow nonuniformity is one of the main sources of rotor blade vibrations in the gas turbine engines. Usually, the flow circumferential nonuniformity occurs near the annular frames, located in the flow channel of the engine. This leads to the increased dynamic stresses in blades and consequently to the blade damage. The goal of the research was to find an acceptable method of reducing the level of gas flow nonuniformity. Two different methods were investigated during this research. Thus, this study gives the ideas about methods of improving the flow structure in gas turbine engine. Based on existing conditions (under development or existing engine) it allows the selection of the most suitable method for reducing gas flow nonuniformity.

Shale gas production: potential versus actual greenhouse gas emissions

OpenAIRE

O'Sullivan, Francis Martin; Paltsev, Sergey

2012-01-01

Estimates of greenhouse gas (GHG) emissions from shale gas production and use are controversial. Here we assess the level of GHG emissions from shale gas well hydraulic fracturing operations in the United States during 2010. Data from each of the approximately 4000 horizontal shale gas wells brought online that year are used to show that about 900 Gg CH[subscript 4] of potential fugitive emissions were generated by these operations, or 228 Mg CH[subscript 4] per well—a figure inappropriately ...

ENERGY SOURCES AND CARBON EMISSIONS IN THE IRON AND STEEL INDUSTRY SECTOR IN SOUTH ASIA

Directory of Open Access Journals (Sweden)

Tapan Sarker

2013-01-01

Full Text Available This paper examines CO2 emissions from electricity and fuel consumption of different energy sources consumed in the Iron and Steel Industry sector (non-ferrous included, also known as basic metal in five South Asian countries including Bangladesh, India, Nepal, Sri Lanka and Pakistan. The study finds that about 30% of the total energy in the manufacturing industry is used in this sector, which is about 11% of total industrial input, contributing approximately 13% to the Manufacturing Value Added (MVA. Electricity, on the other hand, shares almost 60% of total energy consumption in the five countries in South Asia, followed by natural gas, coal, kerosene and diesel. The study also finds that CO2 emissions vary across sectors in countries in which the study was conducted. For instance, while in Bangladesh CO2 emissions are primarily caused by electricity generation, in India the majority of CO2 emissions are originated from coal. On the contrary, CO2 emissions in Nepal are mostly generated through other fuels such as Charcoal, Diesel and Kerosene. This study provides some policy recommendations, which could help reduce CO2 emissions in the Iron and Steel Industry sector in the South Asian region.

Identification of refined petroleum products in contaminated soils using an identification index for GC chromatograms.

Science.gov (United States)

Kwon, Dongwook; Ko, Myoung-Soo; Yang, Jung-Seok; Kwon, Man Jae; Lee, Seung-Woo; Lee, Seunghak

2015-08-01

Hydrocarbons found in the environment are typically characterized by gas chromatography (GC). The shape of the GC chromatogram has been used to identify the source of petroleum contamination. However, the conventional practice of simply comparing the peak patterns of source products to those of environmental samples is dependent on the subjective decisions of individual analysts. We have developed and verified a quantitative analytical method for interpreting GC chromatograms to distinguish refined petroleum products in contaminated soils. We found that chromatograms for gasoline, kerosene, and diesel could be divided into three ranges with boundaries at C6, C8, C16, and C26. In addition, the relative peak area (RPA(GC)) of each range, a dimensionless ratio of the peak area within each range to that of the total range (C6-C26), had a unique value for each petroleum product. An identification index for GC chromatograms (ID(GC)), defined as the ratio of RPA(GC) of C8-C16 to that of C16-C26, was able to identify diesel and kerosene sources in samples extracted from artificially contaminated soils even after weathering. Thus, the ID(GC) can be used to effectively distinguish between refined petroleum products in contaminated soils.

Russian natural gas policy and its possible effects on European gas markets

International Nuclear Information System (INIS)

Quast, O.; Locatelli, C.

1997-01-01

There is a growing perception among Western European gas experts that Russia has developed a considerable gas surplus - the Russian gas bubble. Thus, the question clearly arises how much gas is available for export and how much gas, over the next 15 to 20 years, can the Russian quasi-monopolist Gazprom market in Western Europe. We consider that Gazprom's export strategy mirrors the approach of Russia's natural gas policy towards the Western European market. In this paper, we will focus on the characteristics of Gazprom's export strategy, its underlying logic, and its impact on Western European gas markets. As a consequence of Gazprom's export strategy, the Russian gas company faces today a price quantity dilemma. Gazprom's problem is to place as much gas as possible in the growing Western European gas market, without destroying downstream gas prices. We argue that Gazprom has adopted a market share expansion and downstream vertical integration strategy, aimed at capturing a part of the downstream gas rent. Although this strategy appears to have initiated a form of gas to gas competition in a number of European consumer markets, this strategy is not based on an aggressive price policy. However, in order to live up to its ambitions, there is a chance that Gazprom will have to somewhat relax traditional contract clauses, such as contract length, indexation terms and take or pay conditions. (author)

El tecno-complejo del Embalse de Urrúnaga (Álava. Nuevas aportaciones al conocimiento de las sociedades del Paleolítico inferior en el norte de la Península Ibérica

Directory of Open Access Journals (Sweden)

Javier FERNÁNDEZ-ERASO

2017-01-01

Full Text Available En este trabajo se presenta una nueva colección lítica adscrita al Paleolítico inferior recuperada en el embalse de Urrúnaga (Álava, País Vasco, España. Consta de 70 artefactos que han sido estudiados conforme a los parámetros de la Tipología Analítica a partir de las estructuras de análisis; Petrológica, Modal-Morfológica, Tecnológica y Tipométrica. A partir de este estudio integral e interdisciplinar se han podido comprender los procesos de captación de materias primas y las diferentes dinámicas de talla a la hora de elaborar los diferentes artefactos. De este modo, el tecno-complejo aquí presentado, supone un nuevo aporte al conocimiento de las comunidades inferopaleoliticas en un territorio donde escasean las evidencias arqueológicas de este periodo cronológico. Además pone de manifiesto la importancia del emplazamiento en el que se sitúa el embalse como un lugar de paso obligado para la comunicación entre el interior meseteño, valle del Ebro y la costa.

La construcción de capital sociotécnico: fabricación de materiales híbridos y transformaciones profesionales

Directory of Open Access Journals (Sweden)

Laura María Morales-Navarro

2013-01-01

Full Text Available Convencionalmente la noción del capital social ha sido analizada delimitando fronteras entre los tipos de capital, tanto en sus dimensiones minimalista, transicional y expansionista, como en su expresión en los planos micro, meso o macro de la acción de agentes. En este trabajo adaptamos el contenido de ¿capital social¿ para entenderlo como ¿capital sociotécnico¿, definido como la valoración de la acción de los actores en la búsqueda del beneficio colectivo y de inseparables vínculos con artefactos y conocimientos. Para demostrar esta acepción de capital social, brindamos los resultados de un estudio etnográfico, mostrando la producción simultánea de hechos científicos, artefactos tecnológicos y valor social, traduciendo la transformación de la identidad disciplinaria de los actores con la fabricación de un revestimiento anticorrosivo de naturaleza híbrida. Analizamos las mutaciones en la elaboración de capital sociotécnico en forma de cambios disciplinarios, de resolución de problemas industriales y de desarrollos de mercancías.

Nuevas perspectivas sobre las culturas botánicas precolombinas de Puerto Rico: implicaciones del estudio de almidones en herramientas líticas, cerámicas y de concha

Directory of Open Access Journals (Sweden)

Jaime R. Pagán Jiménez

2009-11-01

Full Text Available El presente artículo muestra una síntesis de la información arqueobotánica más reciente para Puerto Rico proveniente del estudio de granos de almidón recuperados en artefactos arqueológicos. Dichos artefactos, así como los almidones antiguos presentes en ellos debido a la maceración, a la molienda o a la cocción de órganos vegetales, se ubican cronológicamente en casi todos los períodos culturales precolombinos hasta ahora definidos para la isla. Se discuten brevemente las implicaciones de los resultados arqueobotánicos logrados en torno a tres tópicos altamente generalizados y aceptados en nuestra región, pero actualmente cuestionados: a el carácter de las culturas botánicas de los llamados cazadores-pescadores-recolectores, b la atribuida importancia de la yuca para los pueblos agroceramistas antillanos de origen continental y c la generalizada percepción que se tiene acerca del protagonismo que tuvieron plantas como la yuca y el maíz en el desarrollo de las complejidades culturales tardías de las islas antillanas.

Hydrocarbon-degrading Capability of Bacteria isolated from a Maize ...

African Journals Online (AJOL)

Hydrocarbon-degrading Capability of Bacteria isolated from a Maize-Planted, Kerosene-contaminated Ilorin Alfisol. ... also revealed that some bacteria survive and even thrive in kerosene contaminated soil and hence have the potential to be used in biodegradation and/or bioremediation of oil contaminated soils and water.

BKR 27(1) pp. 44-49 (Achuba et al)

African Journals Online (AJOL)

Femi J. Olorunniji

2015-03-31

Mar 31, 2015 ... ... hydrocarbon petroleum products. (gasoline and kerosene) were evaluated in this study. ..... Journal of Nutrition 23: 581. Ita, S. O. and Udofia,A.U. (2011) Comparative study of some. Haematological Parameters in Rat following ingestion of crude oil. (Nigeria Bonny Light), gasoline, kerosene and diesel.

Gas

International Nuclear Information System (INIS)

1996-01-01

The French government has decided to modify the conditions of extension of local natural gas authorities to neighbouring districts. The European Union is studying the conditions of internal gas market with the objective of more open markets although considering public service requirements

A miniaturized optical gas sensor for natural gas analysis

NARCIS (Netherlands)

Ayerden, N.P.

2016-01-01

The depletion of domestic reserves and the growing use of sustainable resources forces a transition from the locally produced natural gas with a well-known composition toward the ‘new’ gas with a more flexible composition in the Netherlands. For safe combustion and proper billing, the natural gas

Natural gas monthly

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-01-01

The Natural Gas Monthly highlights activities, events, and analyses of interest to public and private sector organizations associated with the natural gas industry. Volume and price data are presented each month for natural gas production, distribution, consumption, and interstate pipeline activities. Producer-related activities and underground storage data are also reported. From time to time, the Natural Gas Monthly features articles designed to assist readers in using and interpreting natural gas information.

Morphology and Phase Composition of Particles Produced by Electro-Discharge-Machining of Iron

International Nuclear Information System (INIS)

Cabanillas, E. D.; Pasqualini, E. E.; Lopez, M.; Cirilo, D.; Desimoni, J.; Mercader, R. C.

2001-01-01

Towards producing metallic particles of controlled size and spherical shape, which are of technological importance, we have collected in the filters of an electro-discharge-machine (EDM) the material ejected from the surface of EDM iron pieces. The conditions of machining were varied for kerosene and water as dielectrics, using a discharge current of 25 A and duration times of 16 and 3072 μs for kerosene and of 32, 384 and 768 μs for water, respectively. Scanning electron microscopy was used to assess the effect of the time of discharge on the size of the particles. Moessbauer spectroscopy and X-ray diffraction revealed that for kerosene EDM particles only cementite-like carbides of diverse stoichiometry were formed. While no oxide was found for kerosene spheres, the analyses showed that besides the main fraction of α-Fe, a small percentage of wuestite (and traces of hematite for the 384 μs sample) formed on the water EDM ones

Morphology and Phase Composition of Particles Produced by Electro-Discharge-Machining of Iron

Energy Technology Data Exchange (ETDEWEB)

Cabanillas, E. D.; Pasqualini, E. E.; Lopez, M.; Cirilo, D. [Comision Nacional de Energia Atomica, Centro Atomico Constituyentes (Argentina); Desimoni, J.; Mercader, R. C. [Universidad Nacional de La Plata, Departamento de Fisica, IFLP, Facultad de Ciencias Exactas (Argentina)

2001-05-15

Towards producing metallic particles of controlled size and spherical shape, which are of technological importance, we have collected in the filters of an electro-discharge-machine (EDM) the material ejected from the surface of EDM iron pieces. The conditions of machining were varied for kerosene and water as dielectrics, using a discharge current of 25 A and duration times of 16 and 3072 {mu}s for kerosene and of 32, 384 and 768 {mu}s for water, respectively. Scanning electron microscopy was used to assess the effect of the time of discharge on the size of the particles. Moessbauer spectroscopy and X-ray diffraction revealed that for kerosene EDM particles only cementite-like carbides of diverse stoichiometry were formed. While no oxide was found for kerosene spheres, the analyses showed that besides the main fraction of {alpha}-Fe, a small percentage of wuestite (and traces of hematite for the 384 {mu}s sample) formed on the water EDM ones.

Modern gas centrifuge and rarefied-gas dynamics

International Nuclear Information System (INIS)

Lowry, R.A.; Halle, E.V.; Wood, H.G. III.

1981-01-01

Today, the modern gas centrifuge appears to be the preferred method for the enrichment of the isotopes of uranium on a commercial scale. That this is the case is the result of diligent development programs pursued in this country as well as in the UK, Germany, and the Netherlands over the several decades since the end of WW II. The theoretical modelling of gas centrifuge performance has made notable advances. However, the theoretical work has been based primarily on continuum fluid dynamics considerations. Centrifuge problems involving rarefied gas dynamics considerations are discussed in this paper

Greenhouse gas emissions from high demand, natural gas-intensive energy scenarios

International Nuclear Information System (INIS)

Victor, D.G.

1990-01-01

Since coal and oil emit 70% and 30% more CO 2 per unit of energy than natural gas (methane), fuel switching to natural gas is an obvious pathway to lower CO 2 emissions and reduced theorized greenhouse warming. However, methane is, itself, a strong greenhouse gas so the CO 2 advantages of natural gas may be offset by leaks in the natural gas recovery and supply system. Simple models of atmospheric CO 2 and methane are used to test this hypothesis for several natural gas-intensive energy scenarios, including the work of Ausubel et al (1988). It is found that the methane leaks are significant and may increase the total 'greenhouse effect' from natural gas-intensive energy scenarios by 10%. Furthermore, because methane is short-lived in the atmosphere, leaking methane from natural gas-intensive, high energy growth scenarios effectively recharges the concentration of atmospheric methane continuously. For such scenarios, the problem of methane leaks is even more serious. A second objective is to explore some high demand scenarios that describe the role of methane leaks in the greenhouse tradeoff between gas and coal as energy sources. It is found that the uncertainty in the methane leaks from the natural gas system are large enough to consume the CO 2 advantages from using natural gas instead of coal for 20% of the market share. (author)

The computer simulation of 3d gas dynamics in a gas centrifuge

Science.gov (United States)

Borman, V. D.; Bogovalov, S. V.; Borisevich, V. D.; Tronin, I. V.; Tronin, V. N.

2016-09-01

We argue on the basis of the results of 2D analysis of the gas flow in gas centrifuges that a reliable calculation of the circulation of the gas and gas content in the gas centrifuge is possible only in frameworks of 3D numerical simulation of gas dynamics in the gas centrifuge (hereafter GC). The group from National research nuclear university, MEPhI, has created a computer code for 3D simulation of the gas flow in GC. The results of the computer simulations of the gas flows in GC are presented. A model Iguassu centrifuge is explored for the simulations. A nonaxisymmetric gas flow is produced due to interaction of the hypersonic rotating flow with the scoops for extraction of the product and waste flows from the GC. The scoops produce shock waves penetrating into a working camera of the GC and form spiral waves there.

The computer simulation of 3d gas dynamics in a gas centrifuge

International Nuclear Information System (INIS)

Borman, V D; Bogovalov, S V; Borisevich, V D; Tronin, I V; Tronin, V N

2016-01-01

We argue on the basis of the results of 2D analysis of the gas flow in gas centrifuges that a reliable calculation of the circulation of the gas and gas content in the gas centrifuge is possible only in frameworks of 3D numerical simulation of gas dynamics in the gas centrifuge (hereafter GC). The group from National research nuclear university, MEPhI, has created a computer code for 3D simulation of the gas flow in GC. The results of the computer simulations of the gas flows in GC are presented. A model Iguassu centrifuge is explored for the simulations. A nonaxisymmetric gas flow is produced due to interaction of the hypersonic rotating flow with the scoops for extraction of the product and waste flows from the GC. The scoops produce shock waves penetrating into a working camera of the GC and form spiral waves there. (paper)

Gist of the gas business law amendment. Deregulation in the town gas business field; Gas jigyoho kaisei no yoten. Toshi gas jigyo bun`ya ni okeru kisei kanwa

Energy Technology Data Exchange (ETDEWEB)

Tada, A. [Agency of Natural Resources and Energy, Tokyo (Japan)

1995-07-20

This paper introduces the summary of the partial amendment in the gas business law (which was enforced in March 1995 upon propositions from the General Energy Investigation Council). The amendment consists mainly of deregulation on business rules for gas supply to large users. The amendment may be summarized as follows: the present billing regulations are deregulated for cases that gas purchasers are large users, permitting in principle the pricing to be agreed upon negotiations between the concerned parties; general gas business operators are allowed to supply gas under certain conditions even outside their supply areas, provided the supply is limited to large users; even any other persons than the general gas business operators can supply gas under certain conditions; persons to start newly a large -scale gas supply business shall be applied with the mandatory portions of the safety regulations that have already been imposed on the general gas business operators; clerical works for the national examination on chief gas engineers will be commissioned to civil organizations; and duplicated application of regulations in the gas utility industry law is eliminated for those operators who are subjected to regulations in the electric utility industry law. 1 fig.

Rancang Bangun Sistem Pengaman Kebocoran Gas LPG (Liquefied Petroleum Gas) Menggunakan Mikrokontroler

OpenAIRE

Ismai, Reza Lutfi; Suseno, Jatmiko Endro; Suryono, Suryono

2017-01-01

Design of LPG gas leakage safety system using microcontroller has been made in this research. The purpose of this research is to make LPG gas sensor circuit to detect LPG gas concentration and make automation systems for LPG gas leakage protection. LPG gas leakage protection system can be applied for the use of LPG gas safely. Component to detect LPG gas concentration use sensor MQ 5 which can gives resistance as the output value which can be converted into voltage through the voltage devider...

Experimental investigation of CI engine combustion, performance and emissions in DEE–kerosene–diesel blends of high DEE concentration

International Nuclear Information System (INIS)

Patil, K.R.; Thipse, S.S.

2015-01-01

Highlights: • First ever study on DEE–kerosene–diesel blends used in CI engine. • DEE–diesel blends have reduced the trade-off between PM and NOx of diesel engine. • Optimum performance blend has been found as DE15D. • Adulteration effects of kerosene with diesel have also been investigated. • Additions of kerosene with DE15D blend have deteriorated the overall engine performance. - Abstract: An experimental investigation had been carried out to evaluate the effects of oxygenated cetane improver diethyl ether (DEE) blends with kerosene and diesel on the combustion, performance and emission characteristics of a direct injection diesel engine. Initially, 2%, 5%, 8%, 10%, 15%, 20% and 25% DEE (by volume) were blended into diesel. The DEE–diesel blends have reduced the trade-off between PM and NOx of diesel engine and the optimum performance blend has been found as DE15D. Similarly, 5%, 10% and 15% kerosene (by volume) were blended into diesel to investigate the adulteration effect. In addition, a study was carried out to evaluate the effects of kerosene adulteration on DE15D by blending with 5%, 10% and 15% kerosene (by volume). The engine tests were carried out at 10%, 25%, 50%, 75% and 100% of full load for all test fuels. Laboratory fuel tests showed that the DEE is completely miscible with diesel and kerosene in any proportion. It was observed that the density, kinematic viscosity and calorific value of the blends decreases, while the oxygen content and cetane number of the blends increases with the concentration of DEE addition. The experimental test results showed that the DEE–kerosene–diesel blends have low brake thermal efficiency, high brake specific fuel consumption, high smoke at full load, low smoke at part load, overall low NO, almost similar CO, high HC at full load and low HC at part load as compared to DE15D blend

Gas source localization and gas distribution mapping with a micro-drone

International Nuclear Information System (INIS)

Neumann, Patrick P.

2013-01-01

The objective of this Ph.D. thesis is the development and validation of a VTOL-based (Vertical Take Off and Landing) micro-drone for the measurement of gas concentrations, to locate gas emission sources, and to build gas distribution maps. Gas distribution mapping and localization of a static gas source are complex tasks due to the turbulent nature of gas transport under natural conditions and becomes even more challenging when airborne. This is especially so, when using a VTOL-based micro-drone that induces disturbances through its rotors, which heavily affects gas distribution. Besides the adaptation of a micro-drone for gas concentration measurements, a novel method for the determination of the wind vector in real-time is presented. The on-board sensors for the flight control of the micro-drone provide a basis for the wind vector calculation. Furthermore, robot operating software for controlling the micro-drone autonomously is developed and used to validate the algorithms developed within this Ph.D. thesis in simulations and real-world experiments. Three biologically inspired algorithms for locating gas sources are adapted and developed for use with the micro-drone: the surge-cast algorithm (a variant of the silkworm moth algorithm), the zigzag / dung beetle algorithm, and a newly developed algorithm called ''pseudo gradient algorithm''. The latter extracts from two spatially separated measuring positions the information necessary (concentration gradient and mean wind direction) to follow a gas plume to its emission source. The performance of the algorithms is evaluated in simulations and real-world experiments. The distance overhead and the gas source localization success rate are used as main performance criteria for comparing the algorithms. Next, a new method for gas source localization (GSL) based on a particle filter (PF) is presented. Each particle represents a weighted hypothesis of the gas source position. As a first step, the PF-based GSL algorithm

Gas source localization and gas distribution mapping with a micro-drone

Energy Technology Data Exchange (ETDEWEB)

Neumann, Patrick P.

2013-07-01

The objective of this Ph.D. thesis is the development and validation of a VTOL-based (Vertical Take Off and Landing) micro-drone for the measurement of gas concentrations, to locate gas emission sources, and to build gas distribution maps. Gas distribution mapping and localization of a static gas source are complex tasks due to the turbulent nature of gas transport under natural conditions and becomes even more challenging when airborne. This is especially so, when using a VTOL-based micro-drone that induces disturbances through its rotors, which heavily affects gas distribution. Besides the adaptation of a micro-drone for gas concentration measurements, a novel method for the determination of the wind vector in real-time is presented. The on-board sensors for the flight control of the micro-drone provide a basis for the wind vector calculation. Furthermore, robot operating software for controlling the micro-drone autonomously is developed and used to validate the algorithms developed within this Ph.D. thesis in simulations and real-world experiments. Three biologically inspired algorithms for locating gas sources are adapted and developed for use with the micro-drone: the surge-cast algorithm (a variant of the silkworm moth algorithm), the zigzag / dung beetle algorithm, and a newly developed algorithm called ''pseudo gradient algorithm''. The latter extracts from two spatially separated measuring positions the information necessary (concentration gradient and mean wind direction) to follow a gas plume to its emission source. The performance of the algorithms is evaluated in simulations and real-world experiments. The distance overhead and the gas source localization success rate are used as main performance criteria for comparing the algorithms. Next, a new method for gas source localization (GSL) based on a particle filter (PF) is presented. Each particle represents a weighted hypothesis of the gas source position. As a first step, the PF

Gas source localization and gas distribution mapping with a micro-drone

Energy Technology Data Exchange (ETDEWEB)

Neumann, Patrick P.

2013-07-01

The objective of this Ph.D. thesis is the development and validation of a VTOL-based (Vertical Take Off and Landing) micro-drone for the measurement of gas concentrations, to locate gas emission sources, and to build gas distribution maps. Gas distribution mapping and localization of a static gas source are complex tasks due to the turbulent nature of gas transport under natural conditions and becomes even more challenging when airborne. This is especially so, when using a VTOL-based micro-drone that induces disturbances through its rotors, which heavily affects gas distribution. Besides the adaptation of a micro-drone for gas concentration measurements, a novel method for the determination of the wind vector in real-time is presented. The on-board sensors for the flight control of the micro-drone provide a basis for the wind vector calculation. Furthermore, robot operating software for controlling the micro-drone autonomously is developed and used to validate the algorithms developed within this Ph.D. thesis in simulations and real-world experiments. Three biologically inspired algorithms for locating gas sources are adapted and developed for use with the micro-drone: the surge-cast algorithm (a variant of the silkworm moth algorithm), the zigzag / dung beetle algorithm, and a newly developed algorithm called ''pseudo gradient algorithm''. The latter extracts from two spatially separated measuring positions the information necessary (concentration gradient and mean wind direction) to follow a gas plume to its emission source. The performance of the algorithms is evaluated in simulations and real-world experiments. The distance overhead and the gas source localization success rate are used as main performance criteria for comparing the algorithms. Next, a new method for gas source localization (GSL) based on a particle filter (PF) is presented. Each particle represents a weighted hypothesis of the gas source position. As a first step, the PF-based GSL algorithm

Gas replacement system for fuel cell. Nenryo denchi no gas chikan hoshiki

Energy Technology Data Exchange (ETDEWEB)

Sugiyama, T

1990-02-14

When stopping the operation of a fuel cell, the gas in the reaction gas system is purged using such an inert gas as nitrogen for inactivation. A gas source such as inert gas bomb must be prepared beforehand for the purpose. This invention relates to a method of production of inert gas from the air collected from atmosphere to use it as the purge gas. The air collected from the atmosphere is passed through an oxygen remover filled with oxidation catalyst to remove oxygen, and dehumidified by a dehumidifier filled with drying agent, the obtained inert drying gas with nitrogen as the main constituent being used as the purge gas. Copper system catalyst supported by silica is used as the oxidation catalyst, and silica gel as the drying agent. After the operation of the fuel cell is re-started, a part of the high temperature fuel gas extracted from the reaction gas system is introduced to the oxygen remover for the reduction of oxidation catalyst and for heat regeneration of dehumidifying agent by the contained hydrogen. 1 fig.

US crude oil, natural gas, and natural gas liquids reserves, 1992 annual report

Energy Technology Data Exchange (ETDEWEB)

1993-10-18

This report presents estimates of proved reserves of crude oil, natural gas, and natural gas liquids as of December 31, 1992, as well as production volumes for the United States, and selected States and State subdivisions for the year 1992. Estimates are presented for the following four categories of natural gas: total gas (wet after lease separation), its two major components (nonassociated and associated-dissolved gas), and total dry gas (wet gas adjusted for the removal of liquids at natural gas processing plants). In addition, two components of natural gas liquids, lease condensate and natural gas plant liquids, have their reserves and production data presented. Also included is information on indicated additional crude oil reserves and crude oil, natural gas, and lease condensate reserves in nonproducing reservoirs. A discussion of notable oil and gas exploration and development activities during 1992 is provided.

US crude oil, natural gas, and natural gas liquids reserves, 1992 annual report

International Nuclear Information System (INIS)

1993-01-01

This report presents estimates of proved reserves of crude oil, natural gas, and natural gas liquids as of December 31, 1992, as well as production volumes for the United States, and selected States and State subdivisions for the year 1992. Estimates are presented for the following four categories of natural gas: total gas (wet after lease separation), its two major components (nonassociated and associated-dissolved gas), and total dry gas (wet gas adjusted for the removal of liquids at natural gas processing plants). In addition, two components of natural gas liquids, lease condensate and natural gas plant liquids, have their reserves and production data presented. Also included is information on indicated additional crude oil reserves and crude oil, natural gas, and lease condensate reserves in nonproducing reservoirs. A discussion of notable oil and gas exploration and development activities during 1992 is provided

Gas hydrate nucleation

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-31

The overall aim of the project was to gain more knowledge about the kinetics of gas hydrate formation especially the early growth phase. Knowledge of kinetics of gas hydrate formation is important and measurements of gas hydrate particle size and concentration can contribute to improve this knowledge. An experimental setup for carrying out experimental studies of the nucleation and growth of gas hydrates has been constructed and tested. Multi wavelength extinction (MWE) was the experimental technique selected for obtaining particle diameter and concentration. The principle behind MWE is described as well as turbidity spectrum analysis that in an initial stage of the project was considered as an alternative experimental technique. Details of the experimental setup and its operation are outlined. The measuring cell consists of a 1 litre horizontal tube sustaining pressures up to 200 bar. Laser light for particle size determination can be applied through sapphire windows. A description of the various auxiliary equipment and of another gas hydrate cell used in the study are given. A computer program for simulation and analysis of gas hydrate experiments is based on the gas hydrate kinetics model proposed by Skovborg and Rasmussen (1993). Initial measurements showed that knowledge of the refractive index of gas hydrates was important in order to use MWE. An experimental determination of the refractive index of methane and natural gas hydrate is described. The test experiments performed with MWE on collectives of gas hydrate particles and experiments with ethane, methane and natural gas hydrate are discussed. Gas hydrate particles initially seem to grow mainly in size and at latter stages in number. (EG) EFP-94; 41 refs.

Gas hydrate nucleation

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-12-31

The overall aim of the project was to gain more knowledge about the kinetics of gas hydrate formation especially the early growth phase. Knowledge of kinetics of gas hydrate formation is important and measurements of gas hydrate particle size and concentration can contribute to improve this knowledge. An experimental setup for carrying out experimental studies of the nucleation and growth of gas hydrates has been constructed and tested. Multi wavelength extinction (MWE) was the experimental technique selected for obtaining particle diameter and concentration. The principle behind MWE is described as well as turbidity spectrum analysis that in an initial stage of the project was considered as an alternative experimental technique. Details of the experimental setup and its operation are outlined. The measuring cell consists of a 1 litre horizontal tube sustaining pressures up to 200 bar. Laser light for particle size determination can be applied through sapphire windows. A description of the various auxiliary equipment and of another gas hydrate cell used in the study are given. A computer program for simulation and analysis of gas hydrate experiments is based on the gas hydrate kinetics model proposed by Skovborg and Rasmussen (1993). Initial measurements showed that knowledge of the refractive index of gas hydrates was important in order to use MWE. An experimental determination of the refractive index of methane and natural gas hydrate is described. The test experiments performed with MWE on collectives of gas hydrate particles and experiments with ethane, methane and natural gas hydrate are discussed. Gas hydrate particles initially seem to grow mainly in size and at latter stages in number. (EG) EFP-94; 41 refs.

Analysis of a multicomponent gas absorption system with carrier gas coabsorption

International Nuclear Information System (INIS)

Merriman, J.R.

1975-03-01

Conventional integrated versions of the packed gas absorber design equations do not account for significant coabsorption of the carrier gas along with the dilute transferring species. These equations, as a result, also neglect the relationship between dilute component transfer and carrier gas coabsorption. In the absorption of Kr and Xe from various carrier gases, using CCl 2 F 2 as the process solvent, carrier coabsorption is substantial. Consequently, a design package was developed to deal with multicomponent gas absorption in systems characterized by carrier gas coabsorption. Developed within the general film theory framework, the basic feature of this design approach is a view of dilute component mass-transfer as a conventional diffusive transfer superimposed on a net flux caused by carrier absorption. Other supporting elements of the design package include predictive techniques for various fluid properties, estimating procedures for carrier gas equilibrium constants, and correlations for carrier gas and dilute gas mass-transfer coefficients. When applied to systems using CCl 2 F 2 as the solvent; He, N 2 , air, or Ar as the carrier gas; and Kr or Xe as the dilute gas; the design approach gave good results, even when extended to conditions well beyond those of its development. (U.S.)

Survey of stranded gas and delivered costs to Europe of selected gas resources

Science.gov (United States)

Attanasi, E.D.; Freeman, P.A.

2011-01-01

Two important trends affecting the expected growth of global gas markets are (1) the shift by many industrialized countries from coal-fired electricity generation to the use of natural gas to generate electricity and (2) the industrialization of the heavily populated Asian countries of India and China. This paper surveys discovered gas in stranded conventional gas accumulations and presents estimates of the cost of developing and producing stranded gas in selected countries. Stranded gas is natural gas in discovered or identified fields that is not currently commercially producible for either physical or economic reasons. Published reserves of gas at the global level do not distinguish between volumes of gas in producing fields and volumes in nonproducing fields. Data on stranded gas reported here-that is the volumes, geographical distribution, and size distributions of stranded gas fields at the country and regional level-are based on the examination of individual-field data and represent a significant improvement in information available to industry and government decision makers. Globally, stranded gas is pervasive, but large volumes in large accumulations are concentrated in only a few areas. The cost component of the paper focuses on stranded conventional gas accumulations in Africa and South America that have the potential to augment supplies to Europe. The methods described for the computation of extraction and transport costs are innovative in that they use information on the sizes and geographical distribution of the identified stranded gas fields. The costs are based on industry data specific to the country and geologic basin where the stranded gas is located. Gas supplies to Europe can be increased significantly at competitive costs by the development of stranded gas. Net extraction costs of producing the identified gas depend critically on the natural-gas-liquids (NGLs) content, the prevailing prices of liquids, the size of the gas accumulation, and the

US crude oil, natural gas, and natural gas liquids reserves 1996 annual report

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-01

The EIA annual reserves report series is the only source of comprehensive domestic proved reserves estimates. This publication is used by the Congress, Federal and State agencies, industry, and other interested parties to obtain accurate estimates of the Nation`s proved reserves of crude oil, natural gas, and natural gas liquids. These data are essential to the development, implementation, and evaluation of energy policy and legislation. This report presents estimates of proved reserves of crude oil, natural gas, and natural gas liquids as of December 31, 1996, as well as production volumes for the US and selected States and State subdivisions for the year 1996. Estimates are presented for the following four categories of natural gas: total gas (wet after lease separation), nonassociated gas and associated-dissolved gas (which are the two major types of wet natural gas), and total dry gas (wet gas adjusted for the removal of liquids at natural gas processing plants). In addition, reserve estimates for two types of natural gas liquids, lease condensate and natural gas plant liquids, are presented. Also included is information on indicated additional crude oil reserves and crude oil, natural gas, and lease condensate reserves in nonproducing reservoirs. A discussion of notable oil and gas exploration and development activities during 1996 is provided. 21 figs., 16 tabs.

El Digital Audio Tape Recorder. Contra autores y creadores

Directory of Open Access Journals (Sweden)

Jun Ono

2015-01-01

Full Text Available La llamada "DAT" (abreviatura por "digital audio tape recorder" / grabadora digital de audio ha recibido cobertura durante mucho tiempo en los medios masivos de Japón y otros países, como un producto acústico electrónico nuevo y controversial de la industria japonesa de artefactos electrónicos. ¿Qué ha pasado con el objeto de esta controversia?

EFEKTIVITAS ALAT TANGKAP MINI PURSE SEINE MENGGUNAKAN SUMBER CAHAYA BERBEDA TERHADAP HASIL TANGKAP IKAN KEMBUNG (Rastrelliger sp.

Directory of Open Access Journals (Sweden)

Ifa Nur Rosyidah

2009-04-01

Full Text Available In fish catching activity, the fishermen in Banyuanyar district use mini tools for catching fish (purse seine and use light assist tools for an operation in the night day. The light, that is used, is kerosene pressure lantern and mercury lights or lamp that is used on water surface (surface lamp. This kind of light is used to collect “pelagic” fish that has positive phototaxis characteristic. Puffer fish’s response towards different sourse of light, that’s kerosene pressure lantern and mercury light is needed to be known. Therefore, we can know the source of light that is more effective in order to collect the fish. It is hoped that the productivity of puffer fish will be developed for the fishermen. During the research with ten times repeating, the total account of puffer fish’s haul that is resulted with two different treatment  by using kerosene pressure lantern and mercury light is that 810 kg and 1.460 kg. The data of puffer fish’s haul that is gotten after using Mann-Whitney test shows that the kerosene pressure lantern and mercury light not to really different, especially in the haul of puffer fish in significant standart (0,05 is 2,262, while in Mann-Whitney test account is 0,171. That means the fishermans in Banyuanyar can use kerosene pressure lantern and mercury light for catching fish as the light assist tools for an operation in the night day. Keywords     :   Purse Seine, Mercury Light and Kerosene Pressure Lantern, Puffer Fish (Rastrellinger sp..

Shale gas - los yacimientos de hidrocarburos no convencionales: origen del Shale gas

Directory of Open Access Journals (Sweden)

José Francisco Longoria Treviño

2015-06-01

Full Text Available El shale gas tiene su origen en la acumulación de materia orgánica en cuencas marinas. En Norteamérica el gas de lutita (shale gas es una fuente emergente de gas natural de bajo costo. El gas natural es una fuente de energía abundante y relativamente limpia al quemarse. Se ha convertido en un combustible popular tanto para aplicaciones residenciales como industriales. De acuerdo con los datos recientes se estima que el suministro de gas natural derivado de yacimientos no convencionales (gas de lutita – shale gas durará más de 100 años. El gas natural ofrece un remplazo potencial para sustituir a los combustibles fósiles que producen gases de efecto invernadero y que en la actualidad se usan en la generación de energía, calefacción y transporte. Las emisiones de gas de efecto invernadero de la combustión de gas natural son aproximadamente 30% más limpias que aquellas que se derivan del aceite y 45% más limpias de las del carbón.

GAS METERING PUMP

Science.gov (United States)

George, C.M.

1957-12-31

A liquid piston gas pump is described, capable of pumping minute amounts of gas in accurately measurable quantities. The pump consists of a flanged cylindrical regulating chamber and a mercury filled bellows. Sealed to the ABSTRACTS regulating chamber is a value and having a gas inlet and outlet, the inlet being connected by a helical channel to the bellows. A gravity check valve is in the gas outlet, so the gas passes through the inlet and the helical channel to the bellows where the pumping action as well as the metering is accomplished by the actuation of the mercury filled bellows. The gas then flows through the check valve and outlet to any associated apparatus.

An Ideal Gas Law Simulator for Atmospheric Gas Molecules ...

African Journals Online (AJOL)

The ideal gas law which is the equation of state of a hypothetical ideal gas that allows us to gain useful insights into the behavior of most real gases at low densities was utilized in this work to conceptualize, design and develop the ideal gas law simulator in a 3 dimensional space using Microsoft Visual Studio, Microsoft ...

Gas ampoule-syringe

International Nuclear Information System (INIS)

Gay, D.D.

1986-01-01

This patent describes disposable gas ampoule holding or containing a gas such as a radioactive gas, comprising: (a) a cylindrical glass tube which is adapted to hold the gas; (b) a layer of absorbent material which circumscribes and which contacts cylindrical glass tube (a) which absorbs the gas; (c) a plastic tube, which circumscribes and contacts absorbent material layer (b) and which is externally threaded on each of its end portions; (d) a cap, which is threaded onto a first end of plastic tube (c); (e) a cylindrical block, which is positioned in the first end of cylindrical glass tube (a) adjacent to cap (d), which contacts cylindrical glass tube (a), which is composed of a foamed material and which is impregnated with a gas adsorbent material; (f) a cylindrical plunger tip, which is located in the first end of cylindrical glass tube (a) in a gas-tight manner adjacent to cylindrical block (e); (g) an end stopper, which has a central cylindrical shaft that is positioned in the second end of cylindrical glass tube (a); and (h) a cap, which is threaded onto the second end of plastic tube (e). A combination of the disposable gas ampoule and syringe adapted to operably interface with the gas ampoule is also described

Tomorrow, gas

International Nuclear Information System (INIS)

Icart, Laura; Jean, Pascale; Georget, Cyrille; Schmill, Rafael

2017-01-01

This document contains 12 articles notably addressing the importance of natural gas production and supplies in Europe. The themes of the articles are: the advantages of natural gas in the context of energy and environmental policies, energy diversification, energy supply in the local territories, etc.; the position of GrDF, one of the main French natural gas supplier; LPG (butane, propane), a solution which popularity grows in remote areas; the Gaya project (production of renewable gas from dry biomass); a panorama of gas supply routes in Europe; the situation of gas in Europe's energy supply and consumption; the promotion of LNG fuel for maritime and fluvial ships; why the small scale LNG could be the next revolution; presentation of the new 'Honfleur' ferry (using LNG fuel) that will cross the English Channel by 2019; carbon market and the role of ETS for the energy policy in Europe facing the climatic change challenge; presentation of the French 'Climate Plan' that aims to engage France into a carbon neutrality by 2050; presentation of the French policy against air pollution; economic growth, energy, climate: how to square this circle?

Impact of fuel composition on emissions and performance of GTL kerosene blends in a Cessna Citation II

NARCIS (Netherlands)

Snijders, T.A.; Melkert, J.A.; Bogers, P.F.; Bauldreay, J.; Wahl, C.R.M.; Kapernaum, M.G.

2011-01-01

International jet fuel specifications permit up to 50% volume Fischer-Tropsch synthetic paraffinic kerosines (FT-SPKs), such as Gas-to-Liquids (GTL) Kerosine, in Jet A-1. Higher SPK-content fuels could, however, produce desirable fuels: lower density, higher SPK-content fuels may have benefits for

Landfill gas

International Nuclear Information System (INIS)

Hartnell, Gaynor

2000-01-01

Following the UK Government's initiative for stimulating renewable energy through the Non-Fossil Fuel Obligation (NFFO), the UK landfill gas industry has more than trebled in size in just 4 years. As a result, UK companies are now in a strong position to offer their skills and services overseas. Ireland, Greece and Spain also resort heavily to disposal to landfill. Particularly rapid growth of the landfill gas market is expected in the OECD-Pacific and NAFTA areas. The article explains that landfill gas is a methane-rich mixture produced by anaerobic decomposition of organic wastes in landfills: under optimum conditions, up to 500 cubic meters of gas can be obtained from 1 tonne of biodegradable waste. Data on the number and capacity of sites in the UK are given. The Landfill Gas Association runs courses to counteract the skills shortage in the UK, and tailored courses for overseas visitors are planned

Radon gas in oil and natural gas production facilities

International Nuclear Information System (INIS)

Chandler, W.P.

1994-01-01

Radon gas is a naturally occurring radionuclide that can be found in some oil and natural gas production facilities, either as a contaminant in a natural gas stream or derived from Radium dissolved in formation waters. The gas itself is not normally a health hazard, but it's decay products, which can be concentrated by plate-out or deposition as a scale in process equipment, can be a health hazard for maintenance personnel. To evaluate possible health hazards, it is necessary to monitor for naturally occurring radioactive materials (NORM) in the gas stream and in the formation water. If Radon and/or Radium is found, a monitoring programme should be initiated to comply with National or State requirements. In some instances, it has been found necessary to dispose of silt and scale materials as low level radioactive waste. 8 refs

Petroleum marketing monthly, May 1994

Energy Technology Data Exchange (ETDEWEB)

1994-05-26

The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Monthly.

Water Pollution, and Treatments Part III: Biodegradation of Oil in Refineries Waste Water and Oils Adsorbed in Agricultural Wastes by Selected Strains of Cyanobacteria

International Nuclear Information System (INIS)

El-Emary, M.M.; Ali, N.A.; Naguib, M.M.

2011-01-01

The main objective of this study is to determine the biological degradation of oil hydrocarbons and sulfur compounds of Marine Balayim crude oil and its refined products by selected indigenous Cyanobacteria strains. The oils used were Marine Balayim crude oil, skimmed oil and some refined products such as gasoline, kerosene, gas oil, fuel oil and petroleum coke. The selected organisms in the current study are the Blue-Green Algae Cyanobacteria, Oscillatoria limentica. This organism was collected from the hyper saline environment of the solar lake in Taba, Sinai, Egypt. The results obtained revealed that the utilization of such strains can be used for the bioremediation of oily waste water.

Petroleum marketing monthly

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-11-01

The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data.

U.S. crude oil, natural gas, and natural gas liquids reserves 1997 annual report

Energy Technology Data Exchange (ETDEWEB)

Wood, John H.; Grape, Steven G.; Green, Rhonda S.

1998-12-01

This report presents estimates of proved reserves of crude oil, natural gas, and natural gas liquids as of December 31, 1997, as well as production volumes for the US and selected States and State subdivisions for the year 1997. Estimates are presented for the following four categories of natural gas: total gas (wet after lease separation), nonassociated gas and associated-dissolved gas (which are the two major types of wet natural gas), and total dry gas (wet gas adjusted for the removal of liquids at natural gas processing plants). In addition, reserve estimates for two types of natural gas liquids, lease condensate and natural gas plant liquids, are presented. Also included is information on indicated additional crude oil reserves and crude oil, natural gas, and lease condensate reserves in nonproducing reservoirs. A discussion of notable oil and gas exploration and development activities during 1997 is provided. 21 figs., 16 tabs.

Monitoring gas quality green gas feeding in; Monitoring gaskwaliteit groengasinvoeding

Energy Technology Data Exchange (ETDEWEB)

Holstein, J. [DNV KEMA Energy and Sustainability, Arnhem (Netherlands); Polman, E. [Kiwa Technology, Apeldoorn (Netherlands)

2013-04-15

Due to the growing number of green gas facilities in the Netherlands more practical knowledge is collected about the production and injection of green gas. Also there was the need to gather data about more practical experiences and knowledge about the gas quality, the performance of gas cleaning and gas treatment systems, as well the integration of green gas in the gas infrastructure. In addition to this, there is a need to get insight in the safety aspects of green gas injection. In order to comply this demand, DNV KEMA en Kiwa Technology measured the quality parameters continuously between June 2012 en January 2013 (three weeks) and discontinuously (gas samples) of green gas at eight production facilities. The measurements have been performed at designated places and are independent from the measurements of the biomethane producer. In order to be sure that the results of DNV KEMA and Kiwa are comparable, a combined measurement program was executed. It results in uniformity for all the measured values: the differences are within the uncertainty level for each component. During the measurement period of three weeks, the gas quality parameters were compared to specifications, written down in the national regulations for the transport and the distribution grid respectively [Dutch] Door het groeiend aantal groengasinvoedingen in Nederland wordt steeds meer praktijkkennis verzameld. Er dient meer praktijkkennis te worden verzameld over de chemische gaskwaliteit, prestaties van de gasreiniging- en gasopwaardering en de wijze van inpassing in de bestaande infrastructuur. Daarnaast is het wenselijk om inzicht te verkrijgen in de veiligheid van groengasinvoeding. Daarop is de groengaskwaliteit op acht locaties over een periode van drie weken continu en discontinu gemeten tussen juni 2012 en januari 2013. De metingen zijn uitgevoerd op een aangewezen plaats door de netbeheerder en staan los van de metingen van de invoeders zelf. Voor het waarborgen van de uniformiteit van

Operation of gas electron multiplier (GEM) with propane gas at low pressure and comparison with tissue-equivalent gas mixtures

Energy Technology Data Exchange (ETDEWEB)

De Nardo, L., E-mail: laura.denardo@unipd.it [University of Padova, Physics and Astronomy Department and PD-INFN, via Marzolo 8, I-35131 Padova (Italy); Farahmand, M., E-mail: majid.farahmand@rivm.nl [Centre for Environmental Safety and Security, National Institute for Public Health and the Environment (RIVM), PO Box 1, NL-3720 BA Bilthoven (Netherlands)

2016-05-21

A Tissue-Equivalent Proportional Counter (TEPC), based on a single GEM foil of standard geometry, has been tested with pure propane gas at low pressure, in order to simulate a tissue site of about 1 µm equivalent size. In this work, the performance of GEM with propane gas at a pressure of 21 and 28 kPa will be presented. The effective gas gain was measured in various conditions using a {sup 244}Cm alpha source. The dependence of effective gain on the electric field strength along the GEM channel and in the drift and induction region was investigated. A maximum effective gain of about 5×10{sup 3} has been reached. Results obtained in pure propane gas are compared with gas gain measurements in gas mixtures commonly employed in microdosimetry, that is propane and methane based Tissue-Equivalent gas mixtures.

A Gas Target with a Tritium Gas Handling System

Energy Technology Data Exchange (ETDEWEB)

Holmqvist, B; Wiedling, T

1963-12-15

A detailed description is given of a simple tritium gas target and its tritium gas filling system, and how to put it into operation. By using the T (p,n) He reaction the gas target has been employed for production of monoenergetic fast neutrons of well defined energy and high intensity. The target has been operated successfully for a long time.

Laser Gas-Analyser for Monitoring a Source of Gas Pollution

Directory of Open Access Journals (Sweden)

V. A. Gorodnichev

2015-01-01

Full Text Available Currently, the problem of growing air pollution of the Earth is of relevance. Many countries have taken measures to protect the environment in order to limit the negative anthropogenic impacts.In such a situation an objective information on the actual content of pollutants in the atmosphere is of importance. For operational inspection of the pollutant concentrations and for monitoring pollution sources, it is necessary to create high-speed high-sensitivity gas analysers.Laser meters are the most effective to provide operational remote and local inspection of gas pollution of the Earth atmosphere.Laser meter for routine gas analysis should conduct operational analysis of the gas mixture (air. For this a development of appropriate information support is required.Such information support should include a database with absorption coefficients of pollutants (specific to potential sources of pollution at possible measuring wavelengths (holding data for a particular emitter of the laser meter and an efficient algorithms to search the measuring wavelengths and conduct a quantitative analysis of gas mixtures.Currently, the issues, important for practice and related to the development of information support for the laser gas analyzer to conduct important for practice routine measurements remain unclear.In this paper we develop an algorithm to provide an operational search of the measuring wavelengths of laser gas analyser and an algorithm to recover quantitively the gaseous component concentrations of controlled gas mixture from the laser multi-spectral measurements that take into account a priori information about the source-controlled gas pollution and do not require a large amount of computation. The method of mathematical simulation shows the effectiveness of the algorithms described both for seach of measuring wavelengths and for quantitative analysis of gas releases.

Gas composition and isotopic geochemistry of cuttings, core, and gas hydrate from the JAPEX/JNOC/GSC Mallik 2L-38 gas hydrate research well

Science.gov (United States)

Lorenson, T.D.

1999-01-01

Molecular and isotopic composition of gases from the JAPEX/JNOC/GSC Mallik 2L-38 gas hydrate research well demonstrate that the in situ gases can be divided into three zones composed of mixtures of microbial and thermogenic gases. Sediments penetrated by the well are thermally immature; thus the sediments are probably not a source of thermogenic gas. Thermogenic gas likely migrated from depths below 5000 m. Higher concentrations of gas within and beneath the gas hydrate zone suggest that gas hydrate is a partial barrier to gas migration. Gas hydrate accumulations occur wholly within zone 3, below the base of permafrost. The gas in gas hydrate resembles, in part, the thermogenic gas in surrounding sediments and gas desorbed from lignite. Gas hydrate composition implies that the primary gas hydrate form is Structure I. However, Structure II stabilizing gases are more concentrated and isotopically partitioned in gas hydrate relative to the sediment hosting the gas hydrate, implying that Structure II gas hydrate may be present in small quantities.

World`s gas field and establishment of gas-specific database

Energy Technology Data Exchange (ETDEWEB)

Seong, W M [Hanyang Unversity, Seoul (Korea, Republic of)

1998-05-01

As the natural gas demand of each country of the world including Korea continuously increases, it will be very important to diversify the characteristics of import areas and import gas as well as the import method for the stable and long-term supply. This study collects information such as reserves, the possibility of production, gas composition, etc. of gas fields that are spread all over the world with areas that can be developed or simply imported under the current conditions of Korea, and analyzed the projects that can be supplied through pipelines and information on non-conventional gas field that can be estimated in the future. 35 refs., 3 figs., 28 tabs.

Supercompressibility factor program. A new calculation method for real gas factors developed by the American Gas Association/Gas Research Institute

Energy Technology Data Exchange (ETDEWEB)

Luebbe, D.

1987-07-01

The innovative US calculation method for natural gas real gas factors is applicable to great pressure and temperature ranges and does not involve any restrictions as to the quality of natural gas. The results obtained for natural gas coming from Northern Germany or for imported natural gas are well consistent with actual measuring results. The model can therefore be applied as a rule for computing in a new technical recommendation and determine real gas factors whenever they are relevant to trading. The respective calculations must be preceded by a complete analysis characterizing the quality of gases. However, the new method allows for the alternative calculation of real gas factors on the basis of a small number of easily measurable factors (for example H/sub 0/, d, CO/sub 2/). This quality seams to be all the more attractive as it allows for an automatic translation of parametric sets at changing gas qualities which for the first time can manage without an expensive online gas chromatography or density translators, respectively.

A new stationary droplet evaporation model and its validation

Directory of Open Access Journals (Sweden)

Fang WANG

2017-08-01

Full Text Available The liquid droplet evaporation character is important for not only combustion chamber design process but also high-accuracy spray combustion simulation. In this paper, the suspended droplets’ evaporation character was measured in a quiescent high-temperature environment by micro high-speed camera system. The gasoline and kerosene experimental results are consistent with the reference data. Methanol, common kerosene and aviation kerosene droplet evaporation characteristics, as well as their evaporation rate changing with temperature, were obtained. The evaporation rate experimental data were compared with the prediction result of Ranz-Marshall boiling temperature model (RMB, Ranz-Marshall low-temperature model (RML, drift flux model (DFM, mass analogy model (MAM, and stagnant film model (SFM. The disparity between the experimental data and the model prediction results was mainly caused by the neglect of the natural convection effect, which was never introduced into the droplet evaporation concept. A new droplet evaporation model with consideration of natural convection buoyancy force effect was proposed in this paper. Under the experimental conditions in this paper, the calculation results of the new droplet evaporation model were agreed with the experimental data for kerosene, methanol and other fuels, with less than 20% relative deviations. The relative deviations between the new evaporation model predictions for kerosene and the experimental data from the references were within 10%.

Gas Transfer in Cellularized Collagen-Membrane Gas Exchange Devices.

Science.gov (United States)

Lo, Justin H; Bassett, Erik K; Penson, Elliot J N; Hoganson, David M; Vacanti, Joseph P

2015-08-01

Chronic lower respiratory disease is highly prevalent in the United States, and there remains a need for alternatives to lung transplant for patients who progress to end-stage lung disease. Portable or implantable gas oxygenators based on microfluidic technologies can address this need, provided they operate both efficiently and biocompatibly. Incorporating biomimetic materials into such devices can help replicate native gas exchange function and additionally support cellular components. In this work, we have developed microfluidic devices that enable blood gas exchange across ultra-thin collagen membranes (as thin as 2 μm). Endothelial, stromal, and parenchymal cells readily adhere to these membranes, and long-term culture with cellular components results in remodeling, reflected by reduced membrane thickness. Functionally, acellular collagen-membrane lung devices can mediate effective gas exchange up to ∼288 mL/min/m(2) of oxygen and ∼685 mL/min/m(2) of carbon dioxide, approaching the gas exchange efficiency noted in the native lung. Testing several configurations of lung devices to explore various physical parameters of the device design, we concluded that thinner membranes and longer gas exchange distances result in improved hemoglobin saturation and increases in pO2. However, in the design space tested, these effects are relatively small compared to the improvement in overall oxygen and carbon dioxide transfer by increasing the blood flow rate. Finally, devices cultured with endothelial and parenchymal cells achieved similar gas exchange rates compared with acellular devices. Biomimetic blood oxygenator design opens the possibility of creating portable or implantable microfluidic devices that achieve efficient gas transfer while also maintaining physiologic conditions.

Gas hydrates in gas storage caverns; Gashydrate bei der Gaskavernenspeicherung

Energy Technology Data Exchange (ETDEWEB)

Groenefeld, P. [Kavernen Bau- und Betriebs-GmbH, Hannover (Germany)

1997-12-31

Given appropriate pressure and temperature conditions the storage of natural gas in salt caverns can lead to the formation of gas hydrates in the producing well or aboveground operating facilities. This is attributable to the stored gas becoming more or less saturated with water vapour. The present contribution describes the humidity, pressure, and temperature conditions conducive to gas hydrate formation. It also deals with the reduction of the gas removal capacity resulting from gas hydrate formation, and possible measures for preventing hydrate formation such as injection of glycol, the reduction of water vapour absorption from the cavern sump, and dewatering of the cavern sump. (MSK) [Deutsch] Bei der Speicherung von Erdgas in Salzkavernen kann es unter entsprechenden Druck- und Temperaturverhaeltnissen zur Gashydratbildung in den Foerdersonden oder obertaegigen Betriebseinrichtungen kommen, weil sich das eingelagerte Gas mehr oder weniger mit Wasserdampf aufsaettigt. Im Folgenden werden die Feuchtigkeits-, Druck- und Temperaturbedingungen, die zur Hydratbildung fuehren erlaeutert. Ebenso werden die Verringerung der Auslagerungskapazitaet durch die Hydratbildung, Massnahmen zur Verhinderung der Hydratbildung wie die Injektion von Glykol, die Verringerung der Wasserdampfaufnahme aus dem Kavernensumpf und die Entwaesserung der Kavernensumpfs selbst beschrieben.

Asia Gas Study

International Nuclear Information System (INIS)

1996-01-01

The Asia region has experienced a period of dynamic growth, both of economies and energy demand. The next fifteen years are likely to see further rapid economic growth in Asia. To fuel this growth energy consumption will also increase rapidly. Of all forms of energy, natural gas demand is likely to grow the fastest. The gas sector will face rapid and dramatic change, creating challenges for the governments of the region. Infrastructure, both for export and domestic consumption of gas, will need to expand significantly. Regional trade in natural gas could triple by 2010. Trade will continue to be dominated by liquefied natural gas (LNG) but pipeline exports will also grow rapidly. Investment needs will be large, putting pressure on governments to look for alternative funding mechanisms. As Asian gas transmission and distribution networks expand and become more interconnected, consumer choice becomes possible. How to encourage and regulate competition will become a vital policy question. As gas consumption increases both in absolute terms, and in terms of its share of energy consumption within particular sectors of the economy (for example, as a fuel for power generation), governments will need to give higher priority to policies dealing with gas security. This study examines the current and possible future role of natural gas in Asia. In particular, it examines in detail the relevant energy policies of six of the key gas producing and consuming economies in the region: Brunei-Darussalam, Chinese Taipei, Indonesia, the Republic of Korea, Malaysia and Thailand. (author). 17 figs., 14 tabs., 7 appends

Gas supplies of interstate natural gas pipeline companies 1990

International Nuclear Information System (INIS)

1992-01-01

This publication provides information on the interstate pipeline companies' supply of natural gas in the United States during calendar year 1990, for use by the Federal Energy Regulatory Commission for regulatory purposes. It also provides information to other Government agencies, the natural gas industry, as well as policy makers, analysts, and consumers interested in current levels of interstate supplies of natural gas and trends over recent years

Gas hydrate in nature

Science.gov (United States)

Ruppel, Carolyn D.

2018-01-17

Gas hydrate is a naturally occurring, ice-like substance that forms when water and gas combine under high pressure and at moderate temperatures. Methane is the most common gas present in gas hydrate, although other gases may also be included in hydrate structures, particularly in areas close to conventional oil and gas reservoirs. Gas hydrate is widespread in ocean-bottom sediments at water depths greater than 300–500 meters (m; 984–1,640 feet [ft]) and is also present in areas with permanently frozen ground (permafrost). Several countries are evaluating gas hydrate as a possible energy resource in deepwater or permafrost settings. Gas hydrate is also under investigation to determine how environmental change may affect these deposits.

The gas market

International Nuclear Information System (INIS)

2015-01-01

A first part proposes an overview of the current situation of the gas market and predictions regarding gas consumption and turnovers of gas producers and dealers, indication of important recent events, and a dashboard of the sector activity. A second part proposes an annual report on trends and on the competition context. It describes the activity structure (sector organisations, gas types, main customers, heating modes in French housing, tariff offers), indicates the main determining factors for the sector activity, describes the context (temperature evolution, thermal electricity production, production of the chemical industry, housing stock, natural gas consumption), analyses the evolution of the sector activity (trends, indicators), describes the sector economic structure (upstream sector, gas supply), and gives an overview of actors: historical suppliers, alternate suppliers, highlights of the sector, company rankings, and financial performance

Natural gas retailing: writing the last chapter of natural gas deregulation

International Nuclear Information System (INIS)

Bjerkelund, T.

1995-01-01

Under the A greement on Natural Gas Markets and Prices of October 1985, the Canadian federal government agreed to deregulate the price of natural gas and to allow a competitive gas market to develop. Several beneficial changes that have occurred as a result of the deregulation were described, including the Industrial Gas Users Association's (IGUA) view on the marketing and sale of natural gas by local gas distributor's (LDC) and the sale within the LDC franchise. IGUA's support for the separation between LDC distribution and LDC sales and marketing activities as the last step in deregulation process, was explained. Several arguments for the opposing view were also discussed. Recommendations were made for effective separation of LDC distribution and LDC sales/marketing activities

Geochemical evidence of water-soluble gas accumulation in the Weiyuan gas field, Sichuan Basin

Directory of Open Access Journals (Sweden)

Shengfei Qin

2016-01-01

Full Text Available At present, there are several different opinions on the formation process of the Weiyuan gas field in the Sichuan Basin and the source of its natural gas. In view of the fact that the methane carbon isotope of the natural gas in the Weiyuan gas field is abnormally heavy, the geologic characteristics of gas reservoirs and the geochemical characteristics of natural gas were first analyzed. In the Weiyuan gas field, the principal gas reservoirs belong to Sinian Dengying Fm. The natural gas is mainly composed of methane, with slight ethane and trace propane. The gas reservoirs are higher in water saturation, with well preserved primary water. Then, it was discriminated from the relationship of H2S content vs. methane carbon isotope that the heavier methane carbon isotope of natural gas in this area is not caused by thermochemical sulfate reduction (TSR. Based on the comparison of methane carbon isotope in this area with that in adjacent areas, and combined with the tectonic evolution background, it is regarded that the natural gas in the Weiyuan gas field is mainly derived from water-soluble gas rather than be migrated laterally from adjacent areas. Some conclusions are made. First, since methane released from water is carbon isotopically heavier, the water-soluble gas accumulation after degasification results in the heavy methane carbon isotope of the gas produced from Weiyuan gas field. Second, along with Himalayan movement, great uplift occurred in the Weiyuan area and structural traps were formed. Under high temperature and high pressure, the gas dissolved in water experienced decompression precipitation, and the released natural gas accumulated in traps, consequently leading to the formation of Weiyuan gas field. Third, based on calculation, the amount of natural gas released from water which is entrapped in the Weiyuan gas field after the tectonic uplift is basically equal to the proved reserves of this field, confirming the opinion of water

Gas assessment and perspectives

International Nuclear Information System (INIS)

Ferrier, Jerome; Bouchard, Georges; Al-Saffar, Ali; ); Bros, Thierry; Khayat, Armand; Leger, Sebastien; Nyouki, Evariste; Jamme, Dominique; Remont, Sophie; Delamare, Monique; Hureau, Geoffroy; Poillion, Christophe; Noilhan, Fabrice; Lafon, Madeleine; Lagumina, Sandra

2015-01-01

This document reports the content of contributions and debates of the 'Gas assessment and perspectives' convention organised by the AFG (the French Gas Association) in March 2015. After an introduction speech, a contributor proposed a comment of the 'World energy outlook 2014' (discussion of factors related to demand and to supply, pressures related to climate change). A round table discussed the context and overview of the gas market, and more precisely addressed the evolution of the gas European market on the short term (demand, storage, production, imports, LNG market), the gas demand for electricity production (the electricity European market, impact on gas, European perspectives, the gas market, three scenarios of evolution of gas demand, World perspectives), the European gas demand on the medium term (the control of gas price in Europe, the final decline of gas, the assessment of the European energy policy, the divorce between Russia and Europe), the recent trends and perspectives for the LNG market (price evolution, a still comfortable market, LNG back in Europe, demand and supply, LNG in the global energy mix), and an assessment of the French gas market by the CRE (the French Commission on Energy Regulation). A second round table addressed the security of gas supply: status and perspectives for the European gas supply, stress tests and measures on the short term to improve supply security, role of the State in the security of gas supply, storage as a key tool for the security of supply, development of new policy for security of supplies. The last speech stated the point of view of a GrDF manager

Evaluation of the acute toxicity of refined petroleum products against ...

African Journals Online (AJOL)

Static and static-renewal evaluation of the acute toxicity of three refined petroleum products — petrol, kerosene and diesel — against two freshwater animals, the mollusc Pila ovata and the fish Poecilia reticulata, was conducted in the laboratory. Petrol, kerosene and diesel were found to be moderately toxic to the test ...

Catalytic hot gas cleaning of gasification gas

Energy Technology Data Exchange (ETDEWEB)

Simell, P. [VTT Energy, Espoo (Finland). Energy Production Technologies

1997-12-31

The aim of this work was to study the catalytic cleaning of gasification gas from tars and ammonia. In addition, factors influencing catalytic activity in industrial applications were studied, as well as the effects of different operation conditions and limits. Also the catalytic reactions of tar and ammonia with gasification gas components were studied. The activities of different catalyst materials were measured with laboratory-scale reactors fed by slip streams taken from updraft and fluid bed gasifiers. Carbonate rocks and nickel catalysts proved to be active tar decomposing catalysts. Ammonia decomposition was in turn facilitated by nickel catalysts and iron materials like iron sinter and iron dolomite. Temperatures over 850 deg C were required at 2000{sup -1} space velocity at ambient pressure to achieve almost complete conversions. During catalytic reactions H{sub 2} and CO were formed and H{sub 2}O was consumed in addition to decomposing hydrocarbons and ammonia. Equilibrium gas composition was almost achieved with nickel catalysts at 900 deg C. No deactivation by H{sub 2}S or carbon took place in these conditions. Catalyst blocking by particulates was avoided by using a monolith type of catalyst. The apparent first order kinetic parameters were determined for the most active materials. The activities of dolomite, nickel catalyst and reference materials were measured in different gas atmospheres using laboratory apparatus. This consisted of nitrogen carrier, toluene as tar model compound, ammonia and one of the components H{sub 2}, H{sub 2}O, CO, CO{sub 2}, CO{sub 2}+H{sub 2}O or CO+CO{sub 2}. Also synthetic gasification gas was used. With the dolomite and nickel catalyst the highest toluene decomposition rates were measured with CO{sub 2} and H{sub 2}O. In gasification gas, however, the rate was retarded due to inhibition by reaction products (CO, H{sub 2}, CO{sub 2}). Tar decomposition over dolomite was modelled by benzene reactions with CO{sub 2}, H

Combustion heating value gas in a gas turbine

Energy Technology Data Exchange (ETDEWEB)

Kelsall, G [CTDD, British Coal Corporation, Cheltenham (United Kingdom); Cannon, M [European Gas Turbines Ltd., Lincoln (United Kingdom)

1997-12-31

Advanced coal and/or biomass based power generation systems offer the potential for high efficiency electricity generation with minimum environmental impact. An important component for many of these advanced power generation cycles is the gas turbine, for which development of a combustion system to burn low calorific value coal derived fuel gas, at turbine inlet temperatures of typically 1 100 - 1 260 deg C and with minimum pollutant emissions, is a key issue. A phased combustor development programme is under-way burning low calorific value fuel gas (3.6 - 4.1 MJ/m{sup 3}) with low emissions, particularly NO{sub x} derived from fuel-bound nitrogen. The first and second phases of the combustor development programme have been completed. The first phase used a generic tubo-annular, prototype combustor based on conventional design principles. Combustor performance for this first prototype combustor was encouraging. The second phase assessed five design variants of the prototype combustor, each variant achieving a progressive improvement in combustor performance. The operating conditions for this assessment were selected to represent a particular medium sized industrial gas turbine operating as part of an Air Blown Gasification Cycle (ABGC). The test conditions assessed therefore included the capability to operate the combustor using natural gas as a supplementary fuel, to suit one possible start-up procedure for the cycle. The paper presents a brief overview of the ABGC development initiative and discusses the general requirements for a gas turbine operating within such a cycle. In addition, it presents full combustor performance results for the second phase of turbine combustor development and discusses the rationale for the progressive design modifications made within that programme. The strategy for the further development of the combustor to burn low calorific value fuel gas with very low conversion of fuel-bound nitrogen to NO{sub x} is presented. (orig.) 6 refs.

Combustion heating value gas in a gas turbine

Energy Technology Data Exchange (ETDEWEB)

Kelsall, G. [CTDD, British Coal Corporation, Cheltenham (United Kingdom); Cannon, M. [European Gas Turbines Ltd., Lincoln (United Kingdom)

1996-12-31

Advanced coal and/or biomass based power generation systems offer the potential for high efficiency electricity generation with minimum environmental impact. An important component for many of these advanced power generation cycles is the gas turbine, for which development of a combustion system to burn low calorific value coal derived fuel gas, at turbine inlet temperatures of typically 1 100 - 1 260 deg C and with minimum pollutant emissions, is a key issue. A phased combustor development programme is under-way burning low calorific value fuel gas (3.6 - 4.1 MJ/m{sup 3}) with low emissions, particularly NO{sub x} derived from fuel-bound nitrogen. The first and second phases of the combustor development programme have been completed. The first phase used a generic tubo-annular, prototype combustor based on conventional design principles. Combustor performance for this first prototype combustor was encouraging. The second phase assessed five design variants of the prototype combustor, each variant achieving a progressive improvement in combustor performance. The operating conditions for this assessment were selected to represent a particular medium sized industrial gas turbine operating as part of an Air Blown Gasification Cycle (ABGC). The test conditions assessed therefore included the capability to operate the combustor using natural gas as a supplementary fuel, to suit one possible start-up procedure for the cycle. The paper presents a brief overview of the ABGC development initiative and discusses the general requirements for a gas turbine operating within such a cycle. In addition, it presents full combustor performance results for the second phase of turbine combustor development and discusses the rationale for the progressive design modifications made within that programme. The strategy for the further development of the combustor to burn low calorific value fuel gas with very low conversion of fuel-bound nitrogen to NO{sub x} is presented. (orig.) 6 refs.

Restos de megafauna asociadas a artefactos en la Sabana de Bogotá Restos de megafauna asociadas a artefactos en la Sabana de Bogotá

Directory of Open Access Journals (Sweden)

Correal Urrego Gonzalo

1982-12-01

Full Text Available Luego de una amplia exploración que cubrió el Valle del río Cauca y la Sabana de Bogotá, excavaciones recientes dentro del plan de estudios "Medio ambiente pleistocénico y el hombre prehistórico en Colombia", permitieron el hallazgo por primera vez en nuestro territorio de evidencias culturales precerámicas asociadas a fauna pleistocénica.  Las investigaciones aquí resumidas se adelantaron por el Instituto de Ciencias Naturales - Museo de Historia Natural- Facultad de Ciencias de la Universidad Nacional de Colombia, con el apoyo financiero de la Fundación de Investigaciones Arqueológicas del Banco de la República.At the archaelogical site TIBITÓ 1, Sabana de Bogotá, there have been found for the first time in Colombia stone and bone artifacts associated with the remains of mastodon (Haplomastodon sp.; Cuvieronius hyodon, horse (Equus amerhippus sp. and deer (Odocoileus virginianus. Bone fragments dated by the C-14 process gave an age of 11.740 ± 110 y BO (Late Pleistocene.

Natural Gas Liberalisation and Deregulation - The German Gas Industry's View

International Nuclear Information System (INIS)

Czernie, W.

2001-01-01

In Europe, the process of creating a single energy market is under way. The 1998 Gas Directive established an important date for the European gas industry. On 10 August 1998, ''Directive 98/30/EC of the European Parliament and of the Council of 22 June 1998 concerning common rules for the internal market in natural gas'' came into force. It had to be transposed into national law by the EU member states within two years, i.e. by 10 August 2000. The Directive is a cornerstone in establishing a competitive gas market in the European Union. It is the outcome of several years of negotiations and can be regarded as a compromise between the various interests. On the whole, it leaves EU member states with sufficient scope for adequately taking account of national characteristics in keeping with the principle of subsidiarity. The process of transposing the Gas Directive into the national law of individual EU member states is being closely followed by the European Commission. While acknowledging all the progress made in the single market process, the Commission still detects shortcomings in the implementation of the Gas Directive on the road to an actual single market. This is seen as a justification for new initiatives and intervention, even though the new political framework for the gas industry has not yet been tested in practice and been able to prove itself on a broad scale for any length of time. In the debate on liberalisation, tried-and-tested instruments of secure and market-oriented gas supply on the European continent long-term supply contracts with take-or-pay clauses and competitive oil-indexed gas prices have also come under scrutiny. However, even under the conditions of liberalisation, security of supply has to be achieved mainly by a balanced mix of supply sources and by long-term supply contracts, including competitive pricing as ensured by so-called oil indexing. In the further liberalisation of west European gas industries, it will be essential to ensure

GAS BEARING

Science.gov (United States)

Skarstrom, C.W.

1960-09-01

A gas lubricated bearing for a rotating shaft is described. The assembly comprises a stationary collar having an annular member resiliently supported thereon. The collar and annular member are provided with cooperating gas passages arranged for admission of pressurized gas which supports and lubricates a bearing block fixed to the rotatable shaft. The resilient means for the annular member support the latter against movement away from the bearing block when the assembly is in operation.

A new method for calculating gas saturation of low-resistivity shale gas reservoirs

Directory of Open Access Journals (Sweden)

Jinyan Zhang

2017-09-01

Full Text Available The Jiaoshiba shale gas field is located in the Fuling area of the Sichuan Basin, with the Upper Ordovician Wufeng–Lower Silurian Longmaxi Fm as the pay zone. At the bottom of the pay zone, a high-quality shale gas reservoir about 20 m thick is generally developed with high organic contents and gas abundance, but its resistivity is relatively low. Accordingly, the gas saturation calculated by formulas (e.g. Archie using electric logging data is often much lower than the experiment-derived value. In this paper, a new method was presented for calculating gas saturation more accurately based on non-electric logging data. Firstly, the causes for the low resistivity of shale gas reservoirs in this area were analyzed. Then, the limitation of traditional methods for calculating gas saturation based on electric logging data was diagnosed, and the feasibility of the neutron–density porosity overlay method was illustrated. According to the response characteristics of neutron, density and other porosity logging in shale gas reservoirs, a model for calculating gas saturation of shale gas was established by core experimental calibration based on the density logging value, the density porosity and the difference between density porosity and neutron porosity, by means of multiple methods (e.g. the dual-porosity overlay method by optimizing the best overlay coefficient. This new method avoids the effect of low resistivity, and thus can provide normal calculated gas saturation of high-quality shale gas reservoirs. It works well in practical application. This new method provides a technical support for the calculation of shale gas reserves in this area. Keywords: Shale gas, Gas saturation, Low resistivity, Non-electric logging, Volume density, Compensated neutron, Overlay method, Reserves calculation, Sichuan Basin, Jiaoshiba shale gas field