Caffeine and length dependence of staircase potentiation in skeletal muscle.

Science.gov (United States)

Rassier, D E; Tubman, L A; MacIntosh, B R

1998-01-01

Skeletal muscle sensitivity to Ca2+ is greater at long lengths, and this results in an optimal length for twitch contractions that is longer than optimal length for tetanic contractions. Caffeine abolishes this length dependence of Ca2+ sensitivity. Muscle length (ML) also affects the degree of staircase potentiation. Since staircase potentiation is apparently caused by an increased Ca2+ sensitivity of the myofilaments, we tested the hypothesis that caffeine depresses the length dependence of staircase potentiation. In situ isometric twitch contractions of rat gastrocnemius muscle before and after 10 s of 10-Hz stimulation were analyzed at seven different lengths to evaluate the length dependence of staircase potentiation. In the absence of caffeine, length dependence of Ca2+ sensitivity was observed, and the degree of potentiation after 10-Hz stimulation showed a linear decrease with increased length (DT = 1.47 - 0.05 ML, r2 = 0.95, where DT is developed tension). Length dependence of Ca2+ sensitivity was decreased by caffeine when caffeine was administered in amounts estimated to result in 0.5 and 0.75 mM concentrations. Furthermore, the negative slope of the relationship between staircase potentiation and muscle length was diminished at the lower caffeine dose, and the slope was not different from zero after the higher dose (DT = 1.53 - 0.009 ML, r2 = 0.43). Our study shows that length dependence of Ca2+ sensitivity in intact skeletal muscle is diminished by caffeine. Caffeine also suppressed the length dependence of staircase potentiation, suggesting that the mechanism of this length dependence may be closely related to the mechanism for length dependence of Ca2+ sensitivity.

Staircase falls: High-risk groups and injury characteristics in 464 patients

NARCIS (Netherlands)

Boele van Hensbroek, P.; Mulder, S.; Luitse, J. S. K.; van Ooijen, M. R.; Goslings, J. C.

2009-01-01

Introduction: Few data are available about the epidemiology and injury characteristics in staircase falls. The available literature mainly concerns children and autopsy studies. Objective: To describe the epidemiology and injury characteristics of staircase falls, and to identify high-risk groups

The Heisenberg antiferromagnet on the square-kagomé lattice

Directory of Open Access Journals (Sweden)

J. Richter

2009-01-01

Full Text Available We discuss the ground state, the low-lying excitations as well as high-field thermodynamics of the Heisenberg antiferromagnet on the two-dimensional square-kagomé lattice. This magnetic system belongs to the class of highly frustrated spin systems with an infinite non-trivial degeneracy of the classical ground state as it is also known for the Heisenberg antiferromagnet on the kagomé and on the star lattice. The quantum ground state of the spin-half system is a quantum paramagnet with a finite spin gap and with a large number of non-magnetic excitations within this gap. We also discuss the magnetization versus field curve that shows a plateaux as well as a macroscopic magnetization jump to saturation due to independent localized magnon states. These localized states are highly degenerate and lead to interesting features in the low-temperature thermodynamics at high magnetic fields such as an additional low-temperature peak in the specific heat and an enhanced magnetocaloric effect.

Room-temperature Coulomb staircase in semiconducting InP nanowires modulated with light illumination.

Science.gov (United States)

Yamada, Toshishige; Yamada, Hidenori; Lohn, Andrew J; Kobayashi, Nobuhiko P

2011-02-04

Detailed electron transport analysis is performed for an ensemble of conical indium phosphide nanowires bridging two hydrogenated n(+)-silicon electrodes. The current-voltage (I-V) characteristics exhibit a Coulomb staircase in the dark with a period of ∼ 1 V at room temperature. The staircase is found to disappear under light illumination. This observation can be explained by assuming the presence of a tiny Coulomb island, and its existence is possible due to the large surface depletion region created within contributing nanowires. Electrons tunnel in and out of the Coulomb island, resulting in the Coulomb staircase I-V. Applying light illumination raises the electron quasi-Fermi level and the tunneling barriers are buried, causing the Coulomb staircase to disappear.

Comparison of phase boundaries between kagomé and honeycomb superconducting wire networks

Science.gov (United States)

Xiao, Yi; Huse, David A.; Chaikin, Paul M.; Higgins, Mark J.; Bhattacharya, Shobo; Spencer, David

2002-06-01

We measure resistively the mean-field superconducting-normal phase boundaries of both kagomé and honeycomb wire networks immersed in a transverse magnetic field. In addition to their agreement with theory about the overall shapes of phase diagrams, they show striking one-to-one correspondence between the cusps in the honeycomb phase boundary and those in the kagomé curve. This correspondence is due to their geometric arrangements and agrees with Lin and Nori's recent calculation. We also find that for the frustrated honeycomb network at f=1/2, the current patterns in the superconducting phase differ between the low-temperature London regime and the higher-temperature Ginzburg-Landau regime near Tc.

Unique atom hyper-kagome order in Na4Ir3O8 and in low-symmetry spinel modifications.

Science.gov (United States)

Talanov, V M; Shirokov, V B; Talanov, M V

2015-05-01

Group-theoretical and thermodynamic methods of the Landau theory of phase transitions are used to investigate the hyper-kagome atomic order in structures of ordered spinels and a spinel-like Na4Ir3O8 crystal. The formation of an atom hyper-kagome sublattice in Na4Ir3O8 is described theoretically on the basis of the archetype (hypothetical parent structure/phase) concept. The archetype structure of Na4Ir3O8 has a spinel-like structure (space group Fd\\bar 3m) and composition [Na1/2Ir3/2](16d)[Na3/2](16c)O(32e)4. The critical order parameter which induces hypothetical phase transition has been stated. It is shown that the derived structure of Na4Ir3O8 is formed as a result of the displacements of Na, Ir and O atoms, and ordering of Na, Ir and O atoms, ordering dxy, dxz, dyz orbitals as well. Ordering of all atoms takes place according to the type 1:3. Ir and Na atoms form an intriguing atom order: a network of corner-shared Ir triangles called a hyper-kagome lattice. The Ir atoms form nanoclusters which are named decagons. The existence of hyper-kagome lattices in six types of ordered spinel structures is predicted theoretically. The structure mechanisms of the formation of the predicted hyper-kagome atom order in some ordered spinel phases are established. For a number of cases typical diagrams of possible crystal phase states are built in the framework of the Landau theory of phase transitions. Thermodynamical conditions of hyper-kagome order formation are discussed by means of these diagrams. The proposed theory is in accordance with experimental data.

[DIN-compatible vision assessment of increased reproducibility using staircase measurement and maximum likelihood analysis].

Science.gov (United States)

Weigmann, U; Petersen, J

1996-08-01

Visual acuity determination according to DIN 58,220 does not make full use of the information received about the patient, in contrast to the staircase method. Thus, testing the same number of optotypes, the staircase method should yield more reproducible acuity results. On the other hand, the staircase method gives systematically higher acuity values because it converges on the 48% point of the psychometric function (for Landolt rings in eight positions) and not on the 65% probability, as DIN 58,220 with criterion 3/5 does. This bias can be avoided by means of a modified evaluation. Using the staircase data we performed a maximum likelihood estimate of the psychometric function as a whole and computed the acuity value for 65% probability of correct answers. We determined monocular visual acuity in 102 persons with widely differing visual performance. Each subject underwent four tests in random order, two according to DIN 58,220 and two using the modified staircase method (Landolt rings in eight positions scaled by a factor 1.26; PC monitor with 1024 x 768 pixels; distance 4.5 m). Each test was performed with 25 optotypes. The two procedures provide the same mean visual acuity values (difference less than 0.02 acuity steps). The test-retest results match in 30.4% of DIN repetitions but in 50% of the staircases. The standard deviation of the test-retest difference is 1.41 (DIN) and 1.06 (modified staircase) acuity steps. Thus the standard deviation of the single test is 1.0 (DIN) and 0.75 (modified staircase) acuity steps. The new method provides visual acuity values identical to DIN 58,220 but is superior with respect to reproducibility.

Low-field anomalous magnetic phase in the kagome-lattice shandite Co3Sn2S2

OpenAIRE

Kassem, Mohamed A.; Tabata, Yoshikazu; Waki, Takeshi; Nakamura, Hiroyuki

2017-01-01

The magnetization process of single crystals of the metallic kagom\\'e ferromagnet Co3Sn2S2 was carefully measured via magnetization and AC susceptibility. Field-dependent anomalous transitions in the magnetization indicate a low-field unconventionally ordered phase stabilized just below TC. The magnetic phase diagrams in applied fields along different crystallographic directions were determined. The magnetic relaxation process studied in frequencies covering five orders of magnitude from 0.01...

Electron Climbing a 'Devil's Staircase' in Wave-Particle Interaction

International Nuclear Information System (INIS)

Macor, Alessandro; Doveil, Fabrice; Elskens, Yves

2005-01-01

Numerous nonlinear driven systems display spectacular responses to forcing, including chaos and complex phase-locking plateaus characterized by 'devil's staircase', Arnold tongues, and Farey trees. In the universality class of Hamiltonian systems, a paradigm is the motion of a charged particle in two waves, which inspired a renormalization group method for its description. Here we report the observation of the underlying 'devil's staircase' by recording the beam velocity distribution function at the outlet of a traveling wave tube versus the amplitude of two externally induced waves

Devil's Staircase in the Magnetoresistance of a Periodic Array of Scatterers

International Nuclear Information System (INIS)

Wiersig, Jan; Ahn, Kang-Hun

2001-01-01

The nonlinear response to an external electric field is studied for classical noninteracting charged particles under the influence of a uniform magnetic field, a periodic potential, and an effective friction force. We find numerical and analytical evidence that the ratio of transverse to longitudinal resistance forms a Devil's staircase. The staircase is attributed to the dynamical phenomenon of mode-locking

High Power Spark Delivery System Using Hollow Core Kagome Lattice Fibers

Directory of Open Access Journals (Sweden)

Ciprian Dumitrache

2014-08-01

Full Text Available This study examines the use of the recently developed hollow core kagome lattice fibers for delivery of high power laser pulses. Compared to other photonic crystal fibers (PCFs, the hollow core kagome fibers have larger core diameter (~50 µm, which allows for higher energy coupling in the fiber while also maintaining high beam quality at the output (M2 = 1.25. We have conducted a study of the maximum deliverable energy versus laser pulse duration using a Nd:YAG laser at 1064 nm. Pulse energies as high as 30 mJ were transmitted for 30 ns pulse durations. This represents, to our knowledge; the highest laser pulse energy delivered using PCFs. Two fiber damage mechanisms were identified as damage at the fiber input and damage within the bulk of the fiber. Finally, we have demonstrated fiber delivered laser ignition on a single-cylinder gasoline direct injection engine.

Devil's staircase in Kondo semimetals

International Nuclear Information System (INIS)

Ueda, K.; Shibata, N.; Science Univ. of Tokyo; Ishii, C.

1996-01-01

Complex magnetic phase diagrams of the trivalent cerium monopnictides are widely known as an example of the devil's staircase. We present an effective Hamiltonian for CeX which explains their complex magnetic phase diagrams in a unified way. The effective Hamiltonian consists of semimetallic conduction bands and localized f spins. A new feature is the inter-band transitions with spin exchange which frustrates with the usual intra-band Kondo couplings. (orig.)

Extremely Low Loss THz Guidance Using Kagome Lattice Porous Core Photonic Crystal Fiber

DEFF Research Database (Denmark)

Hossain, Anwar; Hasanuzzaman, G.K.M.; Habib, Selim

2015-01-01

A novel porous core Kagome lattice photonic crystal fiber is proposed for extremely low loss THz waves guiding. It has been reported that 82.5% of bulk effective material loss of Topas can be reduced...

Solutions for correlations along the coexistence curve and at the critical point of a kagomé lattice gas with three-particle interactions

Science.gov (United States)

Barry, J. H.; Muttalib, K. A.; Tanaka, T.

2008-01-01

We consider a two-dimensional (d=2) kagomé lattice gas model with attractive three-particle interactions around each triangular face of the kagomé lattice. Exact solutions are obtained for multiparticle correlations along the liquid and vapor branches of the coexistence curve and at criticality. The correlation solutions are also determined along the continuation of the curvilinear diameter of the coexistence region into the disordered fluid region. The method generates a linear algebraic system of correlation identities with coefficients dependent only upon the interaction parameter. Using a priori knowledge of pertinent solutions for the density and elementary triplet correlation, one finds a closed and linearly independent set of correlation identities defined upon a spatially compact nine-site cluster of the kagomé lattice. Resulting exact solution curves of the correlations are plotted and discussed as functions of the temperature and are compared with corresponding results in a traditional kagomé lattice gas having nearest-neighbor pair interactions. An example of application for the multiparticle correlations is demonstrated in cavitation theory.

Length dependence of staircase potentiation: interactions with caffeine and dantrolene sodium.

Science.gov (United States)

Rassier, D E; MacIntosh, B R

2000-04-01

In skeletal muscle, there is a length dependence of staircase potentiation for which the mechanism is unclear. In this study we tested the hypothesis that abolition of this length dependence by caffeine is effected by a mechanism independent of enhanced Ca2+ release. To test this hypothesis we have used caffeine, which abolishes length dependence of potentiation, and dantrolene sodium, which inhibits Ca2+ release. In situ isometric twitch contractions of rat gastrocnemius muscle before and after 20 s of repetitive stimulation at 5 Hz were analyzed at optimal length (Lo), Lo - 10%, and Lo + 10%. Potentiation was observed to be length dependent, with an increase in developed tension (DT) of 78 +/- 12, 51 +/- 5, and 34 +/- 9% (mean +/- SEM), at Lo - 10%, Lo, and Lo + 10%, respectively. Caffeine diminished the length dependence of activation and suppressed the length dependence of staircase potentiation, giving increases in DT of 65+/-13, 53 +/- 11, and 45 +/- 12% for Lo - 10%, Lo, and Lo + 10%, respectively. Dantrolene administered after caffeine did not reverse this effect. Dantrolene alone depressed the potentiation response, but did not affect the length dependence of staircase potentiation, with increases in DT of 58 +/- 17, 26 +/- 8, and 18 +/- 7%, respectively. This study confirms that there is a length dependence of staircase potentiation in mammalian skeletal muscle which is suppressed by caffeine. Since dantrolene did not alter this suppression of the length dependence of potentiation by caffeine, it is apparently not directly modulated by Ca2+ availability in the myoplasm.

An adaptive staircase procedure for the E-Prime programming environment.

Science.gov (United States)

Hairston, W David; Maldjian, Joseph A

2009-01-01

Many studies need to determine a subject's threshold for a given task. This can be achieved efficiently using an adaptive staircase procedure. While the logic and algorithms for staircases have been well established, the few pre-programmed routines currently available to researchers require at least moderate programming experience to integrate into new paradigms and experimental settings. Here, we describe a freely distributed routine developed for the E-Prime programming environment that can be easily integrated into any experimental protocol with only a basic understanding of E-Prime. An example experiment (visual temporal-order-judgment task) where subjects report the order of occurrence of two circles illustrates the behavior and consistency of the routine.

Tunable Quantum Spin Liquidity in the 1 /6 th-Filled Breathing Kagome Lattice

Science.gov (United States)

Akbari-Sharbaf, A.; Sinclair, R.; Verrier, A.; Ziat, D.; Zhou, H. D.; Sun, X. F.; Quilliam, J. A.

2018-06-01

We present measurements on a series of materials, Li2 In1 -xScx Mo3 O8 , that can be described as a 1 /6 th-filled breathing kagome lattice. Substituting Sc for In generates chemical pressure which alters the breathing parameter nonmonotonically. Muon spin rotation experiments show that this chemical pressure tunes the system from antiferromagnetic long range order to a quantum spin liquid phase. A strong correlation with the breathing parameter implies that it is the dominant parameter controlling the level of magnetic frustration, with increased kagome symmetry generating the quantum spin liquid phase. Magnetic susceptibility measurements suggest that this is related to distinct types of charge order induced by changes in lattice symmetry, in line with the theory of Chen et al. [Phys. Rev. B 93, 245134 (2016), 10.1103/PhysRevB.93.245134]. The specific heat for samples at intermediate Sc concentration, which have the minimum breathing parameter, show consistency with the predicted U (1 ) quantum spin liquid.

Generalising the staircase models

International Nuclear Information System (INIS)

Dorey, P.; Ravanini, F.

1993-01-01

Systems of integral equations are proposed which generalise those previously encountered in connection with the so-called staircase models. Under the assumption that these equations describe the finite-size effects of relativistic field theories via the thermodynamic Bethe ansatz, analytical and numerical evidence is given for the existence of a variety of new roaming renormalisation group trajectories. For each positive integer k and s=0, .., k-1, these is a one-parameter family of trajectories, passing close by the coset conformal field theories G (k) xG (nk+s) /G ((n+1)k+s) before finally flowing to a massive theory for s=0, or to another coset model for s.=|0. (orig.)

Staircase Models from Affine Toda Field Theory

CERN Document Server

Dorey, P; Dorey, Patrick; Ravanini, Francesco

1993-01-01

We propose a class of purely elastic scattering theories generalising the staircase model of Al. B. Zamolodchikov, based on the affine Toda field theories for simply-laced Lie algebras g=A,D,E at suitable complex values of their coupling constants. Considering their Thermodynamic Bethe Ansatz equations, we give analytic arguments in support of a conjectured renormalisation group flow visiting the neighbourhood of each W_g minimal model in turn.

Susceptibility and specific heat of the Heisenberg antiferromagnet on the Kagome lattice

International Nuclear Information System (INIS)

Bernhard, B.H.; Canals, B.; Lacroix, C.

2001-01-01

The dynamic susceptibility of the S=((1)/(2)) Heisenberg antiferromagnet is calculated on the Kagome lattice by means of a Green's function decoupling scheme. The spin-spin correlation functions decrease exponentially with distance. The specific heat exhibits a single-peak structure with a T 2 dependence at low temperature and the correct high-temperature behaviour. The calculated total change in entropy indicates a ground-state entropy of 0.46 ln 2

Staircase functions, spectral regidity and a rule for quantizing chaos

International Nuclear Information System (INIS)

Aurich, R.; Steiner, F.

1991-07-01

Considering the Selberg trace formula as an exact version of Gutzwiller's semiclassical periodic-orbit theory in the case of the free motion on compact Riemann surfaces with constant negative curvature (Hadamard-Gutzwiller model), we study two complementary basic problems in quantum chaology: the computation of the calssical staircase N(l), the number of periodic orbits with length shorter than l, in terms of the quantal energy spectrum {E n }, the computation of the spectral staircase N (E), the number of quantal energies below the energy E, in terms of the length spectrum {l n } of the classical periodic orbits. A formulation of the periodic-orbit theory is presented which is intrinsically unsmoothed, but for which an effective smoothing arises from the limited 'input data', i.e. from the limited knowledge of the periodic orbits in the case of N(E) and the limited knowledge of quantal energies in the case of N(l). Based on the periodic-orbit formula for N(E), we propose a new rule for quantizing chaos, which simply states that the quantal energies are determined by the zeros of the function ξ 1 (E) = cos (πN(E)). The formulas for N(l) and N(E) as well as the new quantization condition are tested numerically. Furthermore, it is shown that the staircase N(E) computed from the length spectrum yields (up to a constant) a good description of the spectral rigidity Δ 3 (L), being the first numerical attempt to compute a statistical property of the quantal energy spectrum of a chaotic system from classical periodic orbits. (orig.)

Prospect of quantum anomalous Hall and quantum spin Hall effect in doped kagome lattice Mott insulators.

Science.gov (United States)

Guterding, Daniel; Jeschke, Harald O; Valentí, Roser

2016-05-17

Electronic states with non-trivial topology host a number of novel phenomena with potential for revolutionizing information technology. The quantum anomalous Hall effect provides spin-polarized dissipation-free transport of electrons, while the quantum spin Hall effect in combination with superconductivity has been proposed as the basis for realizing decoherence-free quantum computing. We introduce a new strategy for realizing these effects, namely by hole and electron doping kagome lattice Mott insulators through, for instance, chemical substitution. As an example, we apply this new approach to the natural mineral herbertsmithite. We prove the feasibility of the proposed modifications by performing ab-initio density functional theory calculations and demonstrate the occurrence of the predicted effects using realistic models. Our results herald a new family of quantum anomalous Hall and quantum spin Hall insulators at affordable energy/temperature scales based on kagome lattices of transition metal ions.

Direct observation of a 'devil's staircase' in wave-particle interaction

International Nuclear Information System (INIS)

Doveil, Fabrice; Macor, Alessandro; Elskens, Yves

2006-01-01

We report the experimental observation of a 'devil's staircase' in a time-dependent system considered as a paradigm for the transition to large-scale chaos in the universality class of Hamiltonian systems. A test electron beam is used to observe its non-self-consistent interaction with externally excited wave(s) in a traveling wave tube (TWT). A trochoidal energy analyzer records the beam energy distribution at the output of the interaction line. An arbitrary waveform generator is used to launch a prescribed spectrum of waves along the slow wave structure (a 4 m long helix) of the TWT. The resonant velocity domain associated to a single wave is observed, as well as the transition to large-scale chaos when the resonant domains of two waves and their secondary resonances overlap. This transition exhibits a 'devil's staircase' behavior for increasing excitation amplitude, due to the nonlinear forcing by the second wave on the pendulum-like motion of a charged particle in one electrostatic wave

Magnetization curves for thin films of layered type-II superconductors, Kolmogorov-Arnold-Moser theory, and the devil's staircase

International Nuclear Information System (INIS)

Burkov, S.E.

1991-01-01

Magnetization curves for a thin-layered superconducting film in parallel magnetic field have been shown to become devil's staircases provided the superconducting layers are perpendicular to the film plane. The transition from an incomplete to a complete devil's staircase with decreasing temperature is predicted. A chain of vortices is described by the generalized Frenkel-Kontorova model

Circle Maps and the Devil's Staircase in a Chemical Oscillator

DEFF Research Database (Denmark)

Brøns, Morten; Gross, P.; Bar-Eli, K.

1996-01-01

We explain numerical results on a periodically perturbed Oregonator by Markman and Bar-Eli (J. Phys. Chem. 98 12248 (1994)). If the dynamics of the system is governed by a family of diffeomorphisms of a circle with a Devil's staircase one will expect the observed behavior, i.e. (1) Only periodic...

Using a staircase procedure for the objective measurement of auditory stream integration and segregation thresholds

Directory of Open Access Journals (Sweden)

Mona Isabel Spielmann

2013-08-01

Full Text Available Auditory scene analysis describes the ability to segregate relevant sounds out from the environment and to integrate them into a single sound stream using the characteristics of the sounds to determine whether or not they are related. This study aims to contrast task performances in objective threshold measurements of segregation and integration using identical stimuli, manipulating two variables known to influence streaming, inter-stimulus-interval (ISI and frequency difference (Δf. For each measurement, one parameter (either ISI or Δf was held constant while the other was altered in a staircase procedure. By using this paradigm, it is possible to test within-subject across multiple conditions, covering a wide Δf and ISI range in one testing session. The objective tasks were based on across-stream temporal judgments (facilitated by integration and within-stream deviance detection (facilitated by segregation. Results show the objective integration task is well suited for combination with the staircase procedure, as it yields consistent threshold measurements for separate variations of ISI and Δf, as well as being significantly related to the subjective thresholds. The objective segregation task appears less suited to the staircase procedure. With the integration-based staircase paradigm, a comprehensive assessment of streaming thresholds can be obtained in a relatively short space of time. This permits efficient threshold measurements particularly in groups for which there is little prior knowledge on the relevant parameter space for streaming perception.

First step towards a Devil´s staircase in spin-crossover materials

Czech Academy of Sciences Publication Activity Database

Trzop, E.; Zhang, D.; Pineiro-Lopez, L.; Valverde-Munoz, F.J.; Munoz, M.C.; Palatinus, Lukáš; Guerin, L.; Cailleau, H.; Real, J.A.; Collet, E.

2016-01-01

Roč. 55, č. 30 (2016), s. 8675-8679 ISSN 0044-8249 Institutional support: RVO:68378271 Keywords : aperiodicity * coordination polymers * Devil’s staircase * phase transitions * spin-crossover Subject RIV: BM - Solid Matter Physics ; Magnetism

Structured chaos in a devil's staircase of the Josephson junction.

Science.gov (United States)

Shukrinov, Yu M; Botha, A E; Medvedeva, S Yu; Kolahchi, M R; Irie, A

2014-09-01

The phase dynamics of Josephson junctions (JJs) under external electromagnetic radiation is studied through numerical simulations. Current-voltage characteristics, Lyapunov exponents, and Poincaré sections are analyzed in detail. It is found that the subharmonic Shapiro steps at certain parameters are separated by structured chaotic windows. By performing a linear regression on the linear part of the data, a fractal dimension of D = 0.868 is obtained, with an uncertainty of ±0.012. The chaotic regions exhibit scaling similarity, and it is shown that the devil's staircase of the system can form a backbone that unifies and explains the highly correlated and structured chaotic behavior. These features suggest a system possessing multiple complete devil's staircases. The onset of chaos for subharmonic steps occurs through the Feigenbaum period doubling scenario. Universality in the sequence of periodic windows is also demonstrated. Finally, the influence of the radiation and JJ parameters on the structured chaos is investigated, and it is concluded that the structured chaos is a stable formation over a wide range of parameter values.

Social Stairs : taking the Piano Staircase towards long-term behavioral change

NARCIS (Netherlands)

Peeters, M.M.R.; Megens, C.J.P.G.; Hoven, van den E.A.W.H.; Hummels, C.C.M.; Brombacher, A.C.; Berkovsky, S.; Freyne, J.

2013-01-01

This paper addresses the development of Social Stairs, an intelligent musical staircase to change people’s behavior in the long-term to take the stairs in favor of the elevator. Through designing with the Experiential Design Landscape (EDL) method, a design opportunity was found that social

Devil's staircase in a fully frustrated superconducting array

International Nuclear Information System (INIS)

Kim, S.; Choi, M.Y.

1993-01-01

A two-dimensional fully frustrated superconducting array with a combined direct and alternating applied current is studied both analytically and numerically. At zero temperature equations of motion can be reduced through the use of the translational symmetry present in the system. Remarkably, we find a series of subharmonic steps in addition to standard integer and half-integer giant Shapiro steps, leading to devil's staircase structure. We also present results of detailed numerical simulations, which indeed reveal such subharmonic fine structure. (orig.)

Microscopic theory of the nearest-neighbor valence bond sector of the spin-1/2 kagome antiferromagnet

Science.gov (United States)

Ralko, Arnaud; Mila, Frédéric; Rousochatzakis, Ioannis

2018-03-01

The spin-1/2 Heisenberg model on the kagome lattice, which is closely realized in layered Mott insulators such as ZnCu3(OH) 6Cl2 , is one of the oldest and most enigmatic spin-1/2 lattice models. While the numerical evidence has accumulated in favor of a quantum spin liquid, the debate is still open as to whether it is a Z2 spin liquid with very short-range correlations (some kind of resonating valence bond spin liquid), or an algebraic spin liquid with power-law correlations. To address this issue, we have pushed the program started by Rokhsar and Kivelson in their derivation of the effective quantum dimer model description of Heisenberg models to unprecedented accuracy for the spin-1/2 kagome, by including all the most important virtual singlet contributions on top of the orthogonalization of the nearest-neighbor valence bond singlet basis. Quite remarkably, the resulting picture is a competition between a Z2 spin liquid and a diamond valence bond crystal with a 12-site unit cell, as in the density-matrix renormalization group simulations of Yan et al. Furthermore, we found that, on cylinders of finite diameter d , there is a transition between the Z2 spin liquid at small d and the diamond valence bond crystal at large d , the prediction of the present microscopic description for the two-dimensional lattice. These results show that, if the ground state of the spin-1/2 kagome antiferromagnet can be described by nearest-neighbor singlet dimers, it is a diamond valence bond crystal, and, a contrario, that, if the system is a quantum spin liquid, it has to involve long-range singlets, consistent with the algebraic spin liquid scenario.

Architectural design and physical activity: an observational study of staircase and elevator use in different buildings.

Science.gov (United States)

Bassett, David R; Browning, Ray; Conger, Scott A; Wolff, Dana L; Flynn, Jennifer I

2013-05-01

The indoor built environment has the potential to influence levels of physical activity. However, the extent to which architectural design in commercial buildings can influence the percentage of people choosing to use the stairs versus elevators is unknown. The purpose of this study was to determine if buildings with centrally located, accessible, and aesthetically pleasing staircases result in a greater percentage of people taking the stairs. Direct observations of stair and elevator use were conducted in 3 buildings on a university campus. One of the buildings had a bank of 4 centrally located elevators and a fire escape stairwell behind a steel door. The other 2 buildings had centrally located staircases and out-of-the-way elevators. The percentage of people who ascended the stairs was 8.1% in the elevator-centric building, compared with 72.8% and 81.1% in the 2 stair-centric buildings (P building, compared with 89.5% and 93.7% in the stair-centric buildings (P buildings are constructed with centrally located, accessible, and aesthetically pleasing staircases, a greater percentage of people will choose to take the stairs.

Critical manifold of the kagome-lattice Potts model

International Nuclear Information System (INIS)

Jacobsen, Jesper Lykke; Scullard, Christian R

2012-01-01

Any two-dimensional infinite regular lattice G can be produced by tiling the plane with a finite subgraph B⊆G; we call B a basis of G. We introduce a two-parameter graph polynomial P B (q, v) that depends on B and its embedding in G. The algebraic curve P B (q, v) = 0 is shown to provide an approximation to the critical manifold of the q-state Potts model, with coupling v = e K − 1, defined on G. This curve predicts the phase diagram not only in the physical ferromagnetic regime (v > 0), but also in the antiferromagnetic (v B (q, v) = 0 provides the exact critical manifold in the limit of infinite B. Furthermore, for some lattices G—or for the Ising model (q = 2) on any G—the polynomial P B (q, v) factorizes for any choice of B: the zero set of the recurrent factor then provides the exact critical manifold. In this sense, the computation of P B (q, v) can be used to detect exact solvability of the Potts model on G. We illustrate the method for two choices of G: the square lattice, where the Potts model has been exactly solved, and the kagome lattice, where it has not. For the square lattice we correctly reproduce the known phase diagram, including the antiferromagnetic transition and the singularities in the Berker–Kadanoff phase at certain Beraha numbers. For the kagome lattice, taking the smallest basis with six edges we recover a well-known (but now refuted) conjecture of F Y Wu. Larger bases provide successive improvements on this formula, giving a natural extension of Wu’s approach. We perform large-scale numerical computations for comparison and find excellent agreement with the polynomial predictions. For v > 0 the accuracy of the predicted critical coupling v c is of the order 10 −4 or 10 −5 for the six-edge basis, and improves to 10 −6 or 10 −7 for the largest basis studied (with 36 edges). This article is part of ‘Lattice models and integrability’, a special issue of Journal of Physics A: Mathematical and Theoretical in honour of

Observation of Various and Spontaneous Magnetic Skyrmionic Bubbles at Room Temperature in a Frustrated Kagome Magnet with Uniaxial Magnetic Anisotropy

KAUST Repository

Hou, Zhipeng; Ren, Weijun; Ding, Bei; Xu, Guizhou; Wang, Yue; Yang, Bing; Zhang, Qiang; Zhang, Ying; Liu, Enke; Xu, Feng; Wang, Wenhong; Wu, Guangheng; Zhang, Xixiang; Shen, Baogen; Zhang, Zhidong

2017-01-01

to various external stimuli acting as information carriers in spintronic devices. Here, the first observation of skyrmionic magnetic bubbles with variable topological spin textures formed at room temperature in a frustrated kagome Fe3 Sn2 magnet with uniaxial

Structured chaos in a devil's staircase of the Josephson junction

International Nuclear Information System (INIS)

Shukrinov, Yu. M.; Botha, A. E.; Medvedeva, S. Yu.; Kolahchi, M. R.; Irie, A.

2014-01-01

The phase dynamics of Josephson junctions (JJs) under external electromagnetic radiation is studied through numerical simulations. Current-voltage characteristics, Lyapunov exponents, and Poincaré sections are analyzed in detail. It is found that the subharmonic Shapiro steps at certain parameters are separated by structured chaotic windows. By performing a linear regression on the linear part of the data, a fractal dimension of D = 0.868 is obtained, with an uncertainty of ±0.012. The chaotic regions exhibit scaling similarity, and it is shown that the devil's staircase of the system can form a backbone that unifies and explains the highly correlated and structured chaotic behavior. These features suggest a system possessing multiple complete devil's staircases. The onset of chaos for subharmonic steps occurs through the Feigenbaum period doubling scenario. Universality in the sequence of periodic windows is also demonstrated. Finally, the influence of the radiation and JJ parameters on the structured chaos is investigated, and it is concluded that the structured chaos is a stable formation over a wide range of parameter values

Novel S = 1/2 Kagome Lattice Materials: Cs2TiCu3F12 and Rb2TiCu3F12

Directory of Open Access Journals (Sweden)

Lewis J. Downie

2015-05-01

Full Text Available Two new members of the A2B′Cu3F12 family of kagome-related materials have been prepared, in order to further understand the crystal-chemical relationships, phase transitions and magnetic behaviour within this family of potentially frustrated S = ½ two-dimensional quantum magnets. Cs2TiCu3F12 adopts a crystal structure with the ideal kagome lattice topology (space group R m at ambient temperature. Diffraction studies reveal different symmetry-lowering structural phase transitions in single crystal and polycrystalline forms at sub-ambient temperatures, with the single crystal form retaining rhombohedral symmetry and the powder form being monoclinic. In both cases, long-range antiferromagnetic order occurs in the region 16–20 K. Rb2TiCu3F12 adopts a distorted triclinic structure even at ambient temperatures.

Weyl magnons in noncoplanar stacked kagome antiferromagnets

Science.gov (United States)

Owerre, S. A.

2018-03-01

Weyl nodes have been experimentally realized in photonic, electronic, and phononic crystals. However, magnonic Weyl nodes are yet to be seen experimentally. In this paper, we propose Weyl magnon nodes in noncoplanar stacked frustrated kagome antiferromagnets, naturally available in various real materials. Most crucially, the Weyl nodes in the current system occur at the lowest excitation and possess a topological thermal Hall effect, therefore they are experimentally accessible at low temperatures due to the population effect of bosonic quasiparticles. In stark contrast to other magnetic systems, the current Weyl nodes do not rely on time-reversal symmetry breaking by the magnetic order. Rather, they result from explicit macroscopically broken time reversal symmetry by the scalar spin chirality of noncoplanar spin textures and can be generalized to chiral spin liquid states. Moreover, the scalar spin chirality gives a real space Berry curvature which is not available in previously studied magnetic Weyl systems. We show the existence of magnon arc surface states connecting projected Weyl magnon nodes on the surface Brillouin zone. We also uncover the first realization of triply-degenerate nodal magnon point in the noncollinear regime with zero scalar spin chirality.

Investigation and hazard assessment of the 2003 and 2007 Staircase Falls rock falls, Yosemite National Park, California, USA

Directory of Open Access Journals (Sweden)

G. F. Wieczorek

2008-05-01

Full Text Available Since 1857 more than 600 rock falls, rock slides, debris slides, and debris flows have been documented in Yosemite National Park, with rock falls in Yosemite Valley representing the majority of the events. On 26 December 2003, a rock fall originating from west of Glacier Point sent approximately 200 m³ of rock debris down a series of joint-controlled ledges to the floor of Yosemite Valley. The debris impacted talus near the base of Staircase Falls, producing fragments of flying rock that struck occupied cabins in Curry Village. Several years later on 9 June 2007, and again on 26 July 2007, smaller rock falls originated from the same source area. The 26 December 2003 event coincided with a severe winter storm and was likely triggered by precipitation and/or frost wedging, but the 9 June and 26 July 2007 events lack recognizable triggering mechanisms. We investigated the geologic and hydrologic factors contributing to the Staircase Falls rock falls, including bedrock lithology, weathering, joint spacing and orientations, and hydrologic processes affecting slope stability. We improved upon previous geomorphic assessment of rock-fall hazards, based on a shadow angle approach, by using STONE, a three-dimensional rock-fall simulation computer program. STONE produced simulated rock-fall runout patterns similar to the mapped extent of the 2003 and 2007 events, allowing us to simulate potential future rock falls from the Staircase Falls detachment area. Observations of recent rock falls, mapping of rock debris, and simulations of rock fall runouts beneath the Staircase Falls detachment area suggest that rock-fall hazard zones extend farther downslope than the extent previously defined by mapped surface talus deposits.

Investigation and hazard assessment of the 2003 and 2007 Staircase Falls rock falls, Yosemite National Park, California, USA

Science.gov (United States)

Wieczorek, G. F.; Stock, G. M.; Reichenbach, P.; Snyder, J. B.; Borchers, J. W.; Godt, J. W.

2008-05-01

Since 1857 more than 600 rock falls, rock slides, debris slides, and debris flows have been documented in Yosemite National Park, with rock falls in Yosemite Valley representing the majority of the events. On 26 December 2003, a rock fall originating from west of Glacier Point sent approximately 200 m3 of rock debris down a series of joint-controlled ledges to the floor of Yosemite Valley. The debris impacted talus near the base of Staircase Falls, producing fragments of flying rock that struck occupied cabins in Curry Village. Several years later on 9 June 2007, and again on 26 July 2007, smaller rock falls originated from the same source area. The 26 December 2003 event coincided with a severe winter storm and was likely triggered by precipitation and/or frost wedging, but the 9 June and 26 July 2007 events lack recognizable triggering mechanisms. We investigated the geologic and hydrologic factors contributing to the Staircase Falls rock falls, including bedrock lithology, weathering, joint spacing and orientations, and hydrologic processes affecting slope stability. We improved upon previous geomorphic assessment of rock-fall hazards, based on a shadow angle approach, by using STONE, a three-dimensional rock-fall simulation computer program. STONE produced simulated rock-fall runout patterns similar to the mapped extent of the 2003 and 2007 events, allowing us to simulate potential future rock falls from the Staircase Falls detachment area. Observations of recent rock falls, mapping of rock debris, and simulations of rock fall runouts beneath the Staircase Falls detachment area suggest that rock-fall hazard zones extend farther downslope than the extent previously defined by mapped surface talus deposits.

Dynamics of a jumping particle on a staircase profile

International Nuclear Information System (INIS)

Campos, J.; Romero-Valles, M.J.; Torres, P.J.; Veerman, J.J.P.

2007-01-01

We perform a detailed analysis of the dynamics of the descent of a particle bouncing down a staircase profile under the action of gravity. In order to get interesting dynamics we make a detail analysis of the case which the particle loses momentum in the direction orthogonal to the collision plane but preserves the tangential component of the momentum. We prove that in this case all orbits are bounded and show the existence and stability of periodic solutions. The interplay between loss and gain of energy due to impacts and free falling respectively generates a rich dynamics

Gapless Spin-Liquid Ground State in the S =1 /2 Kagome Antiferromagnet

Science.gov (United States)

Liao, H. J.; Xie, Z. Y.; Chen, J.; Liu, Z. Y.; Xie, H. D.; Huang, R. Z.; Normand, B.; Xiang, T.

2017-03-01

The defining problem in frustrated quantum magnetism, the ground state of the nearest-neighbor S =1 /2 antiferromagnetic Heisenberg model on the kagome lattice, has defied all theoretical and numerical methods employed to date. We apply the formalism of tensor-network states, specifically the method of projected entangled simplex states, which combines infinite system size with a correct accounting for multipartite entanglement. By studying the ground-state energy, the finite magnetic order appearing at finite tensor bond dimensions, and the effects of a next-nearest-neighbor coupling, we demonstrate that the ground state is a gapless spin liquid. We discuss the comparison with other numerical studies and the physical interpretation of this result.

Superconductivity in a copper(II)-based coordination polymer with perfect kagome structure

Energy Technology Data Exchange (ETDEWEB)

Huang, Xing; Liu, Liyao; Xu, Wei; Zhu, Daoben [Beijing National Laboratory for Molecular Sciences, Key Laboratory of Organic Solids, Institute of Chemistry, Chinese Academy of Sciences, Beijing (China); University of Chinese Academy of Sciences, Beijing (China); Zhang, Shuai [Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing (China); Yu, Lei [Department of Chemistry, University of Kentucky, Lexington, KY (United States); Chen, Genfu [Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing (China); University of Chinese Academy of Sciences, Beijing (China); Collaborative Innovation Center of Quantum Matter, Beijing (China)

2018-01-02

A highly crystalline copper(II) benzenehexathiolate coordination polymer (Cu-BHT) has been prepared. The two-dimensional kagome structure has been confirmed by powder X-ray diffraction, high-resolution transmission electron microscopy, and high-resolution scanning transmission electron microscopy. The as-prepared sample exhibits bulk superconductivity at about 0.25 K, which is confirmed by the zero resistivity, AC magnetic susceptibility, and specific heat measurements. Another diamagnetic transition at about 3 K suggests that there is a second superconducting phase that may be associated with a single layer or few layers of Cu-BHT. It is the first time that superconductivity has been observed in a coordination polymer. (copyright 2018 Wiley-VCH Verlag GmbH and Co. KGaA, Weinheim)

Analog simulations of josephson junction in a microwave field. Devil's staircase, fractal dimension, and decay constants

International Nuclear Information System (INIS)

Kuznik, V.; Odehnal, M.

1986-01-01

The RSJ model of the Josephson junction in the presence of a microwave field is studied using an analog computer, with special attention to the behavior of this system near or at the critical line, where the set of substeps forms a complete devil's staircase on the I-V characteristic. A value of fractal dimension D = 0.868 +/- 0.002 is determined from 240 substeps between the winding numbers W = 0 and W = 1. Four values of decay constants are determined. The results agree very well with the prediction obtained from the one-dimensional circle map. A self-similarity graph is shown confirming that the staircase is very near the critical line. Results confirm the universal and global character of D and decay constants on the critical line, as was suggested by Jensen et al

Larger spontaneous polarization ferroelectric inorganic-organic hybrids: [PbI3](infinity) chains directed organic cations aggregation to Kagomé-shaped tubular architecture.

Science.gov (United States)

Zhao, Hai-Rong; Li, Dong-Ping; Ren, Xiao-Ming; Song, You; Jin, Wan-Qin

2010-01-13

Four isostructural inorganic-organic hybrid ferroelectric compounds, assembled from achiral 3-R-benzylidene-1-aminopyridiniums (R = NO(2), Br, Cl, or F for 1-4, respectively) and [PbI(3)](-) anions with the chiral Kagomé-shaped tubular aggregating architecture, show larger spontaneous polarizations.

Branch structures at the steps of the devil's staircase of the sine circle map

International Nuclear Information System (INIS)

Wen, H.C.; Duong-van, M.

1992-01-01

We have discovered substructures consisting of branches at each step of the devil's staircase of the sine circle map. These substructures are found to follow the hierarchy of the Farey tree. We develop a formalism to relate the rational winding number W=p/q to the number of branches in these substructures

Continuous Easy-Plane Deconfined Phase Transition on the Kagome Lattice

Science.gov (United States)

Zhang, Xue-Feng; He, Yin-Chen; Eggert, Sebastian; Moessner, Roderich; Pollmann, Frank

2018-03-01

We use large scale quantum Monte Carlo simulations to study an extended Hubbard model of hard core bosons on the kagome lattice. In the limit of strong nearest-neighbor interactions at 1 /3 filling, the interplay between frustration and quantum fluctuations leads to a valence bond solid ground state. The system undergoes a quantum phase transition to a superfluid phase as the interaction strength is decreased. It is still under debate whether the transition is weakly first order or represents an unconventional continuous phase transition. We present a theory in terms of an easy plane noncompact C P1 gauge theory describing the phase transition at 1 /3 filling. Utilizing large scale quantum Monte Carlo simulations with parallel tempering in the canonical ensemble up to 15552 spins, we provide evidence that the phase transition is continuous at exactly 1 /3 filling. A careful finite size scaling analysis reveals an unconventional scaling behavior hinting at deconfined quantum criticality.

Block spins and chirality in Heisenberg model on Kagome and triangular lattices

International Nuclear Information System (INIS)

Subrahmanyam, V.

1994-01-01

The spin-1/2 Heisenberg model (HM) is investigated using a block-spin renormalization approach on Kagome and triangular lattices. In both cases, after coarse graining the triangles on original lattice and truncation of the Hilbert space to the triangular ground state subspace, HM reduces to an effective model on a triangular lattice in terms of the triangular-block degrees of freedom viz. the spin and the chirality quantum numbers. The chirality part of the effective Hamiltonian captures the essential difference between the two lattices. It is seen that simple eigenstates can be constructed for the effective model whose energies serve as upper bounds on the exact ground state energy of HM, and chiral ordered variational states have high energies compared to the other variational states. (author). 12 refs, 2 figs

Electronic properties of a distorted kagome lattice antiferromagnet Dy.sub.3./sub.Ru.sub.4./sub.Al.sub.12./sub..

Czech Academy of Sciences Publication Activity Database

Gorbunov, Denis; Henriques, Margarida Isabel Sousa; Andreev, Alexander V.; Gukasov, A.; Petříček, Václav; Baranov, N. V.; Skourski, Y.; Eigner, Václav; Paukov, M.; Prokleška, J.; Gonçalves, A.P.

2014-01-01

Roč. 90, č. 9 (2014), "094405-1"-"094405-12" ISSN 1098-0121 R&D Projects: GA ČR GAP204/12/0150; GA ČR(CZ) GA14-03276S Grant - others:AVČR(CZ) M100101203 Institutional support: RVO:68378271 Keywords : rare-earth intermetallics * antiferromagnetism * kagome lattice * metamagnetic transition Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 3.736, year: 2014

Ionothermal synthesis of open-framework metal phosphates with a Kagomé lattice network exhibiting canted anti-ferromagnetism† †Electronic supplementary information (ESI) available: Cif files, atomic parameters, X-ray diffraction patterns, IR spectra, TG curves, and thermal ellipsoid plot and atomic label schemes of compound 1–4. See DOI: 10.1039/c4tc00290c Click here for additional data file.

Science.gov (United States)

Wang, Guangmei; Valldor, Martin; Mallick, Bert

2014-01-01

Four open-framework transition-metal phosphates; (NH4)2Co3(HPO4)2F4 (1), (NH4)Co3(HPO4)2(H2PO4)F2 (2), KCo3(HPO4)2(H2PO4)F2 (3), and KFe3(HPO4)2(H2PO4)F2 (4); are prepared by ionothermal synthesis using pyridinium hexafluorophosphate as the ionic liquid. Single-crystal X-ray diffraction analyses reveal that the four compounds contain cobalt/iron–oxygen/fluoride layers with Kagomé topology composed of interlinked face-sharing MO3F3/MO4F2 octahedra. PO3OH pseudo-tetrahedral groups augment the [M3O6F4] (1)/[M3O8F2] layers on both sides to give M3(HPO4)2F4 (1) and M3(HPO4)2F2 (2–4) layers. These layers are stacked along the a axis in a sequence AA…, resulting in the formation of a layer structure for (NH4)2Co3(HPO4)2F4(1). In NH4Co3(HPO4)2(H2PO4)F2 and KM3(HPO4)2(H2PO4)F2, the M3(HPO4)2F2 layers are stacked along the a axis in a sequence AAi… and are connected by [PO3(OH)] tetrahedra, giving rise to a 3-D open framework structure with 10-ring channels along the [001] direction. The negative charges of the inorganic framework are balanced by K+/NH4 + ions located within the channels. The magnetic transition metal cations themselves form layers with stair-case Kagomé topology. Magnetic susceptibility and magnetization measurements reveal that all four compounds exhibit a canted anti-ferromagnetic ground state (T c = 10 or 13 K for Co and T c = 27 K for Fe) with different canting angles. The full orbital moment is observed for both Co2+ and Fe2+. PMID:25580250

Signatures of Dirac Cones in a DMRG Study of the Kagome Heisenberg Model

Directory of Open Access Journals (Sweden)

Yin-Chen He

2017-07-01

Full Text Available The antiferromagnetic spin-1/2 Heisenberg model on a kagome lattice is one of the most paradigmatic models in the context of spin liquids, yet the precise nature of its ground state is not understood. We use large-scale density matrix renormalization group simulations (DMRG on infinitely long cylinders and find indications for the formation of a gapless Dirac spin liquid. First, we use adiabatic flux insertion to demonstrate that the spin gap is much smaller than estimated from previous DMRG simulation. Second, we find that the momentum-dependent excitation spectrum, as extracted from the DMRG transfer matrix, exhibits Dirac cones that match those of a π-flux free-fermion model [the parton mean-field ansatz of a U(1 Dirac spin liquid].

The Borromini's helicoidal staircase in Barberini Palace: scan laser survey and parametric modeling.

Directory of Open Access Journals (Sweden)

Leonardo Paris

2015-07-01

Full Text Available The paper concerns the study of the shape and geometry of the helicoidal staircase in Barberini Palace. Integrated models of representation (graphic and 3D have been produced starting from the digital data acquired by a laser scanner, processed and subsequently managed through procedures for optimizing the cloud-points.The realization of the helicoidal staircase in the Barberini Palace has an important rule in the architectural history because  it is a wonderful example of the constructive development of a complex geometric shape which is a helix oval. This stair should be read and interpreted as evidence of a particular period,the Roman Baroque, rich of intertwining and overlapping of ecclesiastical and noble commissions, of alternations in the yards of the greatest artists and architects of the era, often working simultaneously. Borromini proposes a modification to the first design of Maderno, which included a helicoidal staircase to the right of the large porch entrance to the palace, imagining a new oval stair  with a set of six twin columns for each revolution, very similar to the staircase that had been built a few years earlier, in 1585, at the Quirinale Palace by the Mascherino. Borromini had worked a few years earlier, under the direction of Maderno, in the Quirinal Palace, having a possibility to carefully study the Mascherino’s oval stair .Following the death of Maderno (1629 the yard of the Barberini Palace takes over the Bernini. Borromini will initiate a collaboration destined to end soon. The scale will be built in 1633 when now Borromini had already left the yard.The article wants above all to highlight the correlations between form and geometry when designing a campaign of digital acquisition using a laser scanner. Indeed, there are important implications to choice the positioning points of the instrument, with important fallout on the relationship between quality and quantity of a points cloud. The points cloud is a 3D

Topologically non-trivial electronic and magnetic states in doped copper Kagome lattices

Science.gov (United States)

Guterding, Daniel; Jeschke, Harald O.; Valenti, Roser

We present a theoretical investigation of doped copper kagome materials based on natural minerals Herbertsmithite [ZnCu3(OH)6Cl2] and Barlowite[Cu4(OH)6FBr]. Using ab-initio density functional theory calculations we estimate the stability of the hypothetical compounds against structural distortions and analyze their electronic and magnetic properties. We find that materials based on Herbertsmithite present an ideal playground for investigating the interplay of non-trivial band-topology and strong electronic correlation effects. In particular, we propose candidates for the Quantum Spin Hall effect at filling 4/3 and the Quantum Anomalous Hall effect at filling 2/3. For the Barlowite system we point out a route to realize a Quantum Spin Liquid. This work was supported by Deutsche Forschungsgemeinschaft under Grant No. SFB/TR 49 and the National Science Foundation under Grant No. PHY11-25915.

Biodeterioration Risk Threatens the 3100 Year Old Staircase of Hallstatt (Austria): Possible Involvement of Halophilic Microorganisms.

Science.gov (United States)

Piñar, Guadalupe; Dalnodar, Dennis; Voitl, Christian; Reschreiter, Hans; Sterflinger, Katja

2016-01-01

The prosperity of Hallstatt (Salzkammergut region, Austria) is based on the richness of salt in the surrounding mountains and salt mining, which is documented as far back as 1500 years B.C. Substantial archaeological evidence of Bronze and Iron Age salt mining has been discovered, with a wooden staircase (1108 B.C.) being one of the most impressive and well preserved finds. However, after its discovery, fungal mycelia have been observed on the surface of the staircase, most probably due to airborne contamination after its find. As a basis for the further preservation of this valuable object, the active micro-flora was examined to investigate the presence of potentially biodegradative microorganisms. Most of the strains isolated from the staircase showed to be halotolerant and halophilic microorganisms, due to the saline environment of the mine. Results derived from culture-dependent assays revealed a high fungal diversity, including both halotolerant and halophilic fungi, the most dominant strains being members of the genus Phialosimplex (synonym: Aspergillus). Additionally, some typical cellulose degraders, namely Stachybotrys sp. and Cladosporium sp. were detected. Numerous bacterial strains were isolated and identified as members of 12 different genera, most of them being moderately halophilic species. The most dominant isolates affiliated with species of the genera Halovibrio and Marinococcus. Halophilic archaea were also isolated and identified as species of the genera Halococcus and Halorubrum. Molecular analyses complemented the cultivation assays, enabling the identification of some uncultivable archaea of the genera Halolamina, Haloplanus and Halobacterium. Results derived from fungi and bacteria supported those obtained by cultivation methods, exhibiting the same dominant members in the communities. The results clearly showed the presence of some cellulose degraders that may become active if the requirements for growth and the environmental conditions

Biodeterioration Risk Threatens the 3100 Year Old Staircase of Hallstatt (Austria: Possible Involvement of Halophilic Microorganisms.

Directory of Open Access Journals (Sweden)

Guadalupe Piñar

Full Text Available The prosperity of Hallstatt (Salzkammergut region, Austria is based on the richness of salt in the surrounding mountains and salt mining, which is documented as far back as 1500 years B.C. Substantial archaeological evidence of Bronze and Iron Age salt mining has been discovered, with a wooden staircase (1108 B.C. being one of the most impressive and well preserved finds. However, after its discovery, fungal mycelia have been observed on the surface of the staircase, most probably due to airborne contamination after its find.As a basis for the further preservation of this valuable object, the active micro-flora was examined to investigate the presence of potentially biodegradative microorganisms.Most of the strains isolated from the staircase showed to be halotolerant and halophilic microorganisms, due to the saline environment of the mine. Results derived from culture-dependent assays revealed a high fungal diversity, including both halotolerant and halophilic fungi, the most dominant strains being members of the genus Phialosimplex (synonym: Aspergillus. Additionally, some typical cellulose degraders, namely Stachybotrys sp. and Cladosporium sp. were detected. Numerous bacterial strains were isolated and identified as members of 12 different genera, most of them being moderately halophilic species. The most dominant isolates affiliated with species of the genera Halovibrio and Marinococcus. Halophilic archaea were also isolated and identified as species of the genera Halococcus and Halorubrum. Molecular analyses complemented the cultivation assays, enabling the identification of some uncultivable archaea of the genera Halolamina, Haloplanus and Halobacterium. Results derived from fungi and bacteria supported those obtained by cultivation methods, exhibiting the same dominant members in the communities.The results clearly showed the presence of some cellulose degraders that may become active if the requirements for growth and the environmental

Low-loss Kagome hollow-core fibers operating from the near- to the mid-IR.

Science.gov (United States)

Wheeler, N V; Bradley, T D; Hayes, J R; Gouveia, M A; Liang, S; Chen, Y; Sandoghchi, S R; Abokhamis Mousavi, S M; Poletti, F; Petrovich, M N; Richardson, D J

2017-07-01

We report the fabrication and characterization of Kagome hollow-core antiresonant fibers, which combine low attenuation (as measured at ∼30  cm bend diameter) with a wide operating bandwidth and high modal purity. Record low attenuation values are reported: 12.3 dB/km, 13.9 dB/km, and 9.6 dB/km in three different fibers optimized for operation at 1 μm, 1.55 μm, and 2.5 μm, respectively. These fibers are excellent candidates for ultra-high power delivery at key laser wavelengths including 1.064 μm and 2.94 μm, as well as for applications in gas-based sensing and nonlinear optics.

The triple spiral staircase in the Convent of Santo Domingo de Bonaval (Santiago of Compostela, Spain: design and construction hypothesis

Directory of Open Access Journals (Sweden)

M. C. Fernández Cabo

2017-06-01

Full Text Available By 1700 Domingo de Andrade, at that time master builder of the Santiago de Compostela cathedral (North-west of Spain, built a unique spiral staircase in the Santo Domingo de Bonaval’s Convent, on the outskirts of the city. This paper provides a construction process hypothesis based on the available knowledge and technical resources at that time, involving the geometry, layout, stonework of the steps and their positioning on the site. A 1:5 scale model has been made to demonstrate that the staircase could have been built with no scaffolding at all. That would have meant for Andrade, architect and builder, an important cost reduction. Moreover been a masterpiece with an undeniable show of prowess, it is quite possible that economic reasons had driven the master to this bold design.

Low loss and flat dispersion Kagome photonic crystal fiber in the terahertz regime

Science.gov (United States)

Rana, Sohel; Rakin, Adnan Siraj; Hasan, Md. Rabiul; Reza, Md. Salim; Leonhardt, Rainer; Abbott, Derek; Subbaraman, Harish

2018-03-01

A novel fiber design based on hexagonal shaped holes incorporated within the core of a Kagome lattice photonic crystal fiber (PCF) is presented. The modal properties of the proposed fiber are evaluated by using a finite element method (FEM) with a perfectly matched layer as boundary condition. Simulation results exhibit an ultra-low effective material loss (EML) of 0.029 cm-1 at an operating frequency of 1.3 THz with an optimized core diameter of 300 μm. A positive, low, and flat dispersion of 0.49 ± 0.06 ps/THz/cm is obtained within a broad frequency range from 1.00 to 1.76 THz. Other essential guiding features of the designed fiber such as power fraction and confinement loss are studied. The fabrication possibilities are also investigated to demonstrate feasibility for a wide range of terahertz applications.

Evidence for a devil's staircase in holmium produced by an applied magnetic field

International Nuclear Information System (INIS)

Cowley, R.A.; Jehan, D.A.; McMorrow, D.F.; McIntyre, G.J.

1991-01-01

The magnetic structure of holmium has been studied using neutron diffraction when a magnetic field is applied along the c axis. The field has the effect of suppressing the onset of the commensurate cone phase found at low temperatures in zero field, and instead produces a series of spin-slip structures. In contrast to the zero-field diffraction experiments, where a continuous variation of the magnetic wave vector q was observed, we find that below ∼15 K the wave vector q is always commensurate and forms a devil's staircase with increasing field

Low-field anomalous magnetic phase in the kagome-lattice shandite C o3S n2S2

Science.gov (United States)

Kassem, Mohamed A.; Tabata, Yoshikazu; Waki, Takeshi; Nakamura, Hiroyuki

2017-07-01

The magnetization process of single crystals of the metallic kagome ferromagnet C o3S n2S2 was carefully measured via magnetization and ac susceptibility. Field-dependent anomalous transitions observed in low fields indicate the presence of an unconventional magnetic phase just below the Curie temperature, TC. The magnetic phase diagrams in low magnetic fields along different crystallographic directions were determined for the first time. The magnetic relaxation measurements at various frequencies covering five orders of magnitude from 0.01 to 1000 Hz indicate markedly slow spin dynamics only in the anomalous phase with characteristic relaxation times longer than 10 s.

Generation of 2.5 μm and 4.6 μm Dispersive Waves in Kagome Photonic Crystal Fiber with Plasma Production

Institute of Scientific and Technical Information of China (English)

Tian-Qi Zhao; Meng Li; Dong Wei; Xin Ding; Gui-Zhong Zhang; Jian-Quan Yao

2017-01-01

We report our numerical simulation on dispersive waves (DWs) generated in the Kr-filled Kagome hollow-core photonic crystal fiber,by deploying the unidirectional pulse propagation equation.Relatively strong dispersive waves are simultaneously generated at 2.5μm and 4.6μm.It is deciphered that the interplay between plasma currents due to Kr ionization and nonlinear effects plays a key role in DW generation.Remarkably,this kind of DW generation is corroborated by the plasma-corrected phase-matching condition.

Devil's staircase of odd-number charge order modulations in divalent β -vanadium bronzes under pressure

Science.gov (United States)

Yamauchi, Touru; Ueda, Hiroaki; Ohwada, Kenji; Nakao, Hironori; Ueda, Yutaka

2018-03-01

A common characteristic of quasi-one-dimensional (q1D) conductors β -A0.33V2O5 (A = Li, Na, and Ag) is that the charge ordering (CO), the ground state (GS) at ambient pressure, and the superconducting (SC) phases, the GS under high pressure, are competing with each other. We have explored high-pressure properties of divalent β -vanadium bronzes, β -A0.33V2O5 (A = Ca, Sr, and Pb), which are A -cation stoichiometry finely controlled single-crystal/powder samples, and found the absence of the SC phase. In these observations, however, we observed enormous and novel phase transitions, a kind of "devil's staircase"-type phase transitions in the charge ordering (CO) phases. The most surprising discovery in this devil's staircase, which was found mainly in β -Sr0.33V2O5 , is that all the charge modulation vectors of many kinds of CO phases can be represented as a primitive lattice translation vector along the b axis multiplied by several odd numbers. This discovery surely demonstrates interplay between the charge degree freedom and the crystallographic symmetry. We propose two possible mechanisms to explain this phenomenon: "self-charge transfer (carrier redistribution)" between the two subsystems in these compounds and "sequential symmetry reduction" that was discussed in Landau theory of phase transitions. In β -Ca0.33V2O5 we also found a P -T phase diagram similar in outlook but different in detail. The devil's staircase was also observed but it is an incomplete one. Furthermore, the charge modulation vectors in it are shorter than those in β -Sr0.33V2O5 . In β -Pb0.33V2O5 , which has no CO phase at ambient pressure, the pressure-induced antiferromagnetic ordering was observed at around 50 K above 0.5 GPa. Using these two kinds of mechanisms, we also explain the global high-pressure properties in all the stoichiometric divalent β -vanadium bronzes, which were observed as a wide variety of electromagnetic states. In addition, we also discuss a possible key for

Energy and variance budgets of a diffusive staircase with implications for heat flux scaling

Science.gov (United States)

Hieronymus, M.; Carpenter, J. R.

2016-02-01

Diffusive convection, the mode of double-diffusive convection that occur when both temperature and salinity increase with increasing depth, is commonplace throughout the high latitude oceans and diffusive staircases constitute an important heat transport process in the Arctic Ocean. Heat and buoyancy fluxes through these staircases are often estimated using flux laws deduced either from laboratory experiments, or from simplified energy or variance budgets. We have done direct numerical simulations of double-diffusive convection at a range of Rayleigh numbers and quantified the energy and variance budgets in detail. This allows us to compare the fluxes in our simulations to those derived using known flux laws and to quantify how well the simplified energy and variance budgets approximate the full budgets. The fluxes are found to agree well with earlier estimates at high Rayleigh numbers, but we find large deviations at low Rayleigh numbers. The close ties between the heat and buoyancy fluxes and the budgets of thermal variance and energy have been utilized to derive heat flux scaling laws in the field of thermal convection. The result is the so called GL-theory, which has been found to give accurate heat flux scaling laws in a very wide parameter range. Diffusive convection has many similarities to thermal convection and an extension of the GL-theory to diffusive convection is also presented and its predictions are compared to the results from our numerical simulations.

Flat electronic bands in fractal-kagomé network and the effect of perturbation

Energy Technology Data Exchange (ETDEWEB)

Nandy, Atanu, E-mail: atanunandy1989@gmail.com; Chakrabarti, Arunava, E-mail: arunava-chakrabarti@yahoo.co.in [Department of Physics, University of Kalyani, Kalyani, West Bengal - 741235 (India)

2016-05-06

We demonstrate an analytical prescription of demonstrating the flat band [FB] states in a fractal incorporated kagomé type network that can give rise to a countable infinity of flat non-dispersive eigenstates with a multitude of localization area. The onset of localization can, in principle, be delayed in space by an appropriate choice of energy regime. The length scale, at which the onset of localization for each mode occurs, can be tuned at will following the formalism developed within the framework of real space renormalization group. This scheme leads to an exact determination of energy eigenvalue for which one can have dispersionless flat electronic bands. Furthermore, we have shown the effect ofuniform magnetic field for the same non-translationally invariant network model that has ultimately led to an‘apparent invisibility’ of such staggered localized states and to generate absolutely continuous sub-bands in the energy spectrum and again an interesting re-entrant behavior of those FB states.

Degenerate and chiral states in the extended Heisenberg model on the kagome lattice

Science.gov (United States)

Gómez Albarracín, F. A.; Pujol, P.

2018-03-01

We present a study of the low-temperature phases of the antiferromagnetic extended classical Heisenberg model on the kagome lattice, up to third-nearest neighbors. First, we focus on the degenerate lines in the boundaries of the well-known staggered chiral phases. These boundaries have either semiextensive or extensive degeneracy, and we discuss the partial selection of states by thermal fluctuations. Then, we study the model under an external magnetic field on these lines and in the staggered chiral phases. We pay particular attention to the highly frustrated point, where the three exchange couplings are equal. We show that this point can be mapped to a model with spin-liquid behavior and nonzero chirality. Finally, we explore the effect of Dzyaloshinskii-Moriya (DM) interactions in two ways: a homogeneous and a staggered DM interaction. In both cases, there is a rich low-temperature phase diagram, with different spontaneously broken symmetries and nontrivial chiral phases.

Mapping degenerate vortex states in a kagome lattice of elongated antidots via scanning Hall probe microscopy

Science.gov (United States)

Xue, C.; Ge, J.-Y.; He, A.; Zharinov, V. S.; Moshchalkov, V. V.; Zhou, Y. H.; Silhanek, A. V.; Van de Vondel, J.

2017-07-01

We investigate the degeneracy of the superconducting vortex matter ground state by directly visualizing the vortex configurations in a kagome lattice of elongated antidots via scanning Hall probe microscopy. The observed vortex patterns, at specific applied magnetic fields, are in good agreement with the configurations obtained using time-dependent Ginzburg-Landau simulations. Both results indicate that the long-range interaction in this nanostructured superconductor is unable to lift the degeneracy between different vortex states and the pattern formation is mainly ruled by the nearest-neighbor interaction. This simplification makes it possible to identify a set of simple rules characterizing the vortex configurations. We demonstrate that these rules can explain both the observed vortex distributions and the magnetic-field-dependent degree of degeneracy.

Terrorism as a process: a critical review of Moghaddam's "Staircase to Terrorism".

Science.gov (United States)

Lygre, Ragnhild B; Eid, Jarle; Larsson, Gerry; Ranstorp, Magnus

2011-12-01

This study reviews empirical evidence for Moghaddam's model "Staircase to Terrorism," which portrays terrorism as a process of six consecutive steps culminating in terrorism. An extensive literature search, where 2,564 publications on terrorism were screened, resulted in 38 articles which were subject to further analysis. The results showed that while most of the theories and processes linked to Moghaddam's model are supported by empirical evidence, the proposed transitions between the different steps are not. These results may question the validity of a linear stepwise model and may suggest that a combination of mechanisms/factors could combine in different ways to produce terrorism. © 2011 The Authors. Scandinavian Journal of Psychology © 2011 The Scandinavian Psychological Associations.

Thermal Entanglement and Critical Behavior of Magnetic Properties on a Triangulated Kagomé Lattice

Directory of Open Access Journals (Sweden)

N. Ananikian

2011-01-01

Full Text Available The equilibrium magnetic and entanglement properties in a spin-1/2 Ising-Heisenberg model on a triangulated Kagomé lattice are analyzed by means of the effective field for the Gibbs-Bogoliubov inequality. The calculation is reduced to decoupled individual (clusters trimers due to the separable character of the Ising-type exchange interactions between the Heisenberg trimers. The concurrence in terms of the three qubit isotropic Heisenberg model in the effective Ising field in the absence of a magnetic field is non-zero. The magnetic and entanglement properties exhibit common (plateau, peak features driven by a magnetic field and (antiferromagnetic exchange interaction. The (quantum entangled and non-entangled phases can be exploited as a useful tool for signalling the quantum phase transitions and crossovers at finite temperatures. The critical temperature of order-disorder coincides with the threshold temperature of thermal entanglement.

Juxtaposition of the changes in intracellular calcium and force during staircase potentiation at 30 and 37?C

OpenAIRE

Smith, Ian C.; Vandenboom, Rene; Tupling, A. Russell

2014-01-01

Ca2+ entry during the action potential stimulates muscle contraction. During repetitive low frequency stimulation, skeletal muscle undergoes staircase potentiation (SP), a progressive increase in the peak twitch force induced by each successive stimulus. Multiple mechanisms, including myosin regulatory light chain phosphorylation, likely contribute to SP, a temperature-dependent process. Here, we used the Ca2+-sensitive fluorescence indicators acetoxymethyl (AM)-furaptra and AM-fura-2 to exam...

'Devil's Staircase'-Type Phase Transition in NaV2O5 under High Pressure

International Nuclear Information System (INIS)

Ohwada, K.; Fujii, Y.; Takesue, N.; Isobe, M.; Ueda, Y.; Nakao, H.; Wakabayashi, Y.; Murakami, Y.; Ito, K.; Amemiya, Y.

2001-01-01

The 'devil's staircase'-type phase transition in the quarter-filled spin-ladder compound NaV 2 O 5 has been discovered at low temperature and high pressure by synchrotron radiation x-ray diffraction. A large number of transitions are found to successively take place among higher-order commensurate phases with 2a x 2b x zc type superstructures. The observed temperature and pressure dependence of modulation wave number q c , defined by 1/z, is well reproduced by the axial next nearest neighbor Ising model. The q c is suggested to reflect atomic displacements presumably coupled with charge ordering in this system

Synthesis, crystal structure, and magnetic properties of novel 2D kagome materials RE{sub 3}Sb{sub 3}Mg{sub 2}O{sub 14} (RE = La, Pr, Sm, Eu, Tb, Ho): Comparison to RE{sub 3}Sb{sub 3}Zn{sub 2}O{sub 14} family

Energy Technology Data Exchange (ETDEWEB)

Sanders, M.B.; Baroudi, K.M.; Krizan, J.W.; Mukadam, O.A.; Cava, R.J. [Department of Chemistry, Princeton University, Princeton, NJ (United States)

2016-10-15

The crystal structures and magnetic properties of RE{sub 3}Sb{sub 3}Mg{sub 2}O{sub 14} (RE = La, Pr, Sm, Eu, Tb, Ho) with a perfect kagome lattice are presented and compared to RE{sub 3}Sb{sub 3}Zn{sub 2}O{sub 14}. Rietveld structure refinements were performed using X-ray diffraction data, indicating that the layered compounds are fully structurally ordered. The compounds crystallize in a rhombohedral supercell of the cubic pyrochlore structure, in the space group R-3m. Magnetic susceptibility measurements show no signs of magnetic ordering above 2 K. The RE{sub 3}Sb{sub 3}Mg{sub 2}O{sub 14} family is similar to that of RE{sub 3}Sb{sub 3}Zn{sub 2}O{sub 14}; however, the series reported here features a fully ordered distribution of cations in both the nonmagnetic antimony and magnetic rare earth kagome lattices. Unlike the offsite disorder that Zn{sup 2+} experiences in RE{sub 3}Sb{sub 3}Zn{sub 2}O{sub 14}, the magnesium sites in RE{sub 3}Sb{sub 3}Mg{sub 2}O{sub 14} are completely ordered. Here we compare the magnetic properties in both series of kagome compounds to determine how significant Zn{sup 2+}'s positional ordering is within this structure type. The compounds reported here appear to be relatively defect-free and are therefore model systems for investigating magnetic frustration on an ideal 2D rare earth kagome lattice. (copyright 2016 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Climatic irregular staircases: generalized acceleration of global warming.

Science.gov (United States)

De Saedeleer, Bernard

2016-01-27

Global warming rates mentioned in the literature are often restricted to a couple of arbitrary periods of time, or of isolated values of the starting year, lacking a global view. In this study, we perform on the contrary an exhaustive parametric analysis of the NASA GISS LOTI data, and also of the HadCRUT4 data. The starting year systematically varies between 1880 and 2002, and the averaging period from 5 to 30 yr - not only decades; the ending year also varies . In this way, we uncover a whole unexplored space of values for the global warming rate, and access the full picture. Additionally, stairstep averaging and linear least squares fitting to determine climatic trends have been sofar exclusive. We propose here an original hybrid method which combines both approaches in order to derive a new type of climatic trend. We find that there is an overall acceleration of the global warming whatever the value of the averaging period, and that 99.9% of the 3029 Earth's climatic irregular staircases are rising. Graphical evidence is also given that choosing an El Niño year as starting year gives lower global warming rates - except if there is a volcanic cooling in parallel. Our rates agree and generalize several results mentioned in the literature.

Phage and bacteria support mutual diversity in a narrowing staircase of coexistence

DEFF Research Database (Denmark)

Härter, Jan Olaf Mirko; Mitarai, Namiko; Sneppen, Kim

2014-01-01

arms race will typically favor high growth rate, but a phage that infects two bacterial strains differently can occasionally eliminate the fastest growing bacteria. This context-dependent fitness allows abrupt resetting of the 'Red-Queen's race' and constrains the local diversity.......The competitive exclusion principle states that phage diversity M should not exceed bacterial diversity N. By analyzing the steady-state solutions of multistrain equations, we find a new constraint: the diversity N of bacteria living on the same resources is constrained to be M or M+1 in terms...... of the diversity of their phage predators. We quantify how the parameter space of coexistence exponentially decreases with diversity. For diversity to grow, an open or evolving ecosystem needs to climb a narrowing 'diversity staircase' by alternatingly adding new bacteria and phages. The unfolding coevolutionary...

Influence of staircase ventilation state on the airflow and heat transfer of the heated room on the middle floor of high rise building

International Nuclear Information System (INIS)

Shi, W.X.; Ji, J.; Sun, J.H.; Lo, S.M.; Li, L.J.; Yuan, X.Y.

2014-01-01

Highlights: • Experiments are conducted in a scaled building model. • The flow and heat transfer in the heated room are investigated. • The staircase ventilation state influence on the heated room. • The results are useful to understand the safety and energy efficiency of building. - Abstract: Safety and energy efficiency of high rise buildings have attracted public attention in recent decades. In this paper, a set of experiments was conducted in a scaled building model with 12 floors to study the influence of the staircase ventilation state on the flow and heat transfer of the heated room on the middle floor. The airflow, room temperature and fuel burning rate were investigated. It is found that when the window above the heated room is opened, the vents state below the heated room has a significant effect on the airflow and heat transfer in the heated room. When the vents below the heated room are closed, the single-directional air flows into the heated room owing to the stronger stack effect. And the flame tilt angle is larger and the upper hot smoke temperature in the heated room is low. However, when the windows above the heated room are closed, the vents state below the heated room has little influence on the airflow and heat transfer in the heated room. And, there is two-directional air flowing through the door of the heated room The burning rate of heat source is also affected by the staircase ventilation state, and the variation trend varies with the opened window position and pool size

Josephson junction at the onset of chaos: A complete devil's staircase

International Nuclear Information System (INIS)

Alstrom, P.; Levinsen, M.T.

1985-01-01

By analog computer calculations of the resistively and capacitively shunted Josephson junction model, I-V characteristics are measured for several choices of the parameters in the Josephson equation. The points, where hysteresis sets in, are related to cubic inflection points in the return map. For different values of the amplitude and the frequency of the imposed ac field the critical line is determined in the (I,G) space, where I is the dc current and G is the damping factor. Furthermore, the subharmonic steps along the critical line form a complete devil's staircase with a fractal dimension Dapprox.0.87 and a decay exponent for the (1/Q)-steps deltaapprox.3. Besides the hysteresis which gives occasion for a chaotic behavior everywhere below a certain critical voltage, hysteresis also turns up locally. It is suggested that the critical points where local hysteresis occurs can be found by use of a local approximation

Low-T dynamics in the highly frustrated S=32 kagome bilayers: A phenomenological function for a spin liquid state?

Energy Technology Data Exchange (ETDEWEB)

Bono, D. [Laboratoire de Physique des Solides, UMR 8502, Universite Paris-Sud, 91405 Orsay (France); Mendels, P. [Laboratoire de Physique des Solides, UMR 8502, Universite Paris-Sud, 91405 Orsay (France)]. E-mail: mendels@lps.u-psud.fr; Collin, G. [Laboratoire Leon Brillouin, CE Saclay, CEA-CNRS, 91191 Gif-sur-Yvette (France); Blanchard, N. [Laboratoire de Physique des Solides, UMR 8502, Universite Paris-Sud, 91405 Orsay (France); Bert, F. [Laboratoire de Physique des Solides, UMR 8502, Universite Paris-Sud, 91405 Orsay (France); Amato, A. [Paul Scherrer Institut, Laboratory for Muon Spin Spectroscopy, CH-5232 Villigen PSI (Switzerland); Baines, C. [Paul Scherrer Institut, Laboratory for Muon Spin Spectroscopy, CH-5232 Villigen PSI (Switzerland); Hillier, A.D. [ISIS Facility, Rutherford Appleton Laboratory, Chilton, Didcot, Oxon OX11 OQX (United Kingdom)

2006-03-31

A {mu}SR study of the spin dynamics of the archetypes of the highly frustrated magnets, SrCr{sub 9p}Ga{sub 12-9p}O{sub 19} and Ba{sub 2}Sn{sub 2}ZnGa{sub 10-7p}Cr{sub 7p}O{sub 22}, is summarized. Especially, low dilutions of the magnetic network could be achieved and we take advantage of the close similarity between these kagome bilayers to single out their typical properties. The phenomenological model for the {mu}{sup +} relaxation, based on sporadic dynamics due to spin excitations in a singlet sea, proposed by Uemura et al., is extended to all fields, temperature and defects range. Its connection to a RVB picture is discussed.

Tight-binding electrons on triangular and kagome lattices under staggered modulated magnetic fields: quantum Hall effects and Hofstadter butterflies

International Nuclear Information System (INIS)

Li Juan; Wang Yifei; Gong Changde

2011-01-01

We consider the tight-binding models of electrons on a two-dimensional triangular lattice and kagome lattice under staggered modulated magnetic fields. Such fields have two components: a uniform-flux part with strength φ, and a staggered-flux part with strength Δφ. Various properties of the Hall conductances and Hofstadter butterflies are studied. When φ is fixed, variation of Δφ leads to the quantum Hall transitions and Chern numbers of Landau subbands being redistributed between neighboring pairs. The energy spectra with nonzero Δφs have similar fractal structures but quite different energy gaps compared with the original Hofstadter butterflies of Δφ = 0. Moreover, the fan-like structure of Landau levels in the low magnetic field region is also modified appreciably by Δφ.

Tight-binding electrons on triangular and kagome lattices under staggered modulated magnetic fields: quantum Hall effects and Hofstadter butterflies

Energy Technology Data Exchange (ETDEWEB)

Li Juan; Wang Yifei; Gong Changde, E-mail: yfwang_nju@hotmail.com [Center for Statistical and Theoretical Condensed Matter Physics, and Department of Physics, Zhejiang Normal University, Jinhua 321004 (China)

2011-04-20

We consider the tight-binding models of electrons on a two-dimensional triangular lattice and kagome lattice under staggered modulated magnetic fields. Such fields have two components: a uniform-flux part with strength {phi}, and a staggered-flux part with strength {Delta}{phi}. Various properties of the Hall conductances and Hofstadter butterflies are studied. When {phi} is fixed, variation of {Delta}{phi} leads to the quantum Hall transitions and Chern numbers of Landau subbands being redistributed between neighboring pairs. The energy spectra with nonzero {Delta}{phi}s have similar fractal structures but quite different energy gaps compared with the original Hofstadter butterflies of {Delta}{phi} = 0. Moreover, the fan-like structure of Landau levels in the low magnetic field region is also modified appreciably by {Delta}{phi}.

Strain-induced topological magnon phase transitions: applications to kagome-lattice ferromagnets

Science.gov (United States)

Owerre, S. A.

2018-06-01

A common feature of topological insulators is that they are characterized by topologically invariant quantity such as the Chern number and the index. This quantity distinguishes a nontrivial topological system from a trivial one. A topological phase transition may occur when there are two topologically distinct phases, and it is usually defined by a gap closing point where the topologically invariant quantity is ill-defined. In this paper, we show that the magnon bands in the strained (distorted) kagome-lattice ferromagnets realize an example of a topological magnon phase transition in the realistic parameter regime of the system. When spin–orbit coupling (SOC) is neglected (i.e. no Dzyaloshinskii–Moriya interaction), we show that all three magnon branches are dispersive with no flat band, and there exists a critical point where tilted Dirac and semi-Dirac point coexist in the magnon spectra. The critical point separates two gapless magnon phases as opposed to the usual phase transition. Upon the inclusion of SOC, we realize a topological magnon phase transition point at the critical strain , where D and J denote the perturbative SOC and the Heisenberg spin exchange interaction respectively. It separates two distinct topological magnon phases with different Chern numbers for and for . The associated anomalous thermal Hall conductivity develops an abrupt change at , due to the divergence of the Berry curvature in momentum space. The proposed topological magnon phase transition is experimentally feasible by applying external perturbations such as uniaxial strain or pressure.

Staircase and saw-tooth field emission steps from nanopatterned n-type GaSb surfaces

Energy Technology Data Exchange (ETDEWEB)

Kildemo, M.; Levinsen, Y. Inntjore; Le Roy, S.; Soenderga ring rd, E. [Department of Physics, Norwegian University of Science and Technology (NTNU), NO-7491 Trondlieim (Norway); Department of Physics, Norwegian University of Science and Technology (NTNU), NO-7491 Trondlieim, Norway and AB CERN, CH- 1211 Geneva 23 (Switzerland); Laboratoire Surface du Verre et Interfaces, UMR 125 Unite Mixte de Recherche CNRS/Saint-Gobain Laboratoire, 39 Quai Lucien Lefranc, F-93303 Aubervilliers Cedex (France)

2009-09-15

High resolution field emission experiments from nanopatterned GaSb surfaces consisting of densely packed nanocones prepared by low ion-beam-energy sputtering are presented. Both uncovered and metal-covered nanopatterned surfaces were studied. Surprisingly, the field emission takes place by regular steps in the field emitted current. Depending on the field, the steps are either regular, flat, plateaus, or saw-tooth shaped. To the author's knowledge, this is the first time that such results have been reported. Each discrete jump in the field emission may be understood in terms of resonant tunneling through an extended surface space charge region in an n-type, high aspect ratio, single GaSb nanocone. The staircase shape may be understood from the spatial distribution of the aspect ratio of the cones.

Staircase and saw-tooth field emission steps from nanopatterned n-type GaSb surfaces

CERN Document Server

Kildemo, M.; Le Roy, S.; Søndergård, E.

2009-01-01

High resolution field emission experiments from nanopatterned GaSb surfaces consisting of densely packed nanocones prepared by low ion-beam-energy sputtering are presented. Both uncovered and metal-covered nanopatterned surfaces were studied. Surprisingly, the field emission takes place by regular steps in the field emitted current. Depending on the field, the steps are either regular, flat, plateaus, or saw-tooth shaped. To the author’s knowledge, this is the first time that such results have been reported. Each discrete jump in the field emission may be understood in terms of resonant tunneling through an extended surface space charge region in an n-type, high aspect ratio, single GaSb nanocone. The staircase shape may be understood from the spatial distribution of the aspect ratio of the cones.

2D Kagome ordering in the 3D frustrated spinel Li2Mn2O4

International Nuclear Information System (INIS)

Wiebe, C R; Russo, P L; Savici, A T; Uemura, Y J; MacDougall, G J; Luke, G M; Kuchta, S; Greedan, J E

2005-01-01

Muon spin relaxation (μSR) experiments on the geometrically frustrated spinel oxide, Li 2 Mn 2 O 4 , show the development of spin correlations over a range of lengthscales with decreasing temperature. Increased relaxation below ∼150 K is consistent with the onset of spin correlations. Below 50 K, spin order, on a lengthscale which is long range for the μSR probe, appears abruptly in temperature, consistent with prior neutron diffraction results. The oscillations in the zero field asymmetry are analysed using a three frequency model. By locating the muon site, this is shown to be consistent with the unexpected 2Dq=√3x√3 structure on the Kagome planes proposed originally from neutron data. Longitudinal field data demonstrate that some spin dynamics persist even at 2 K. Thus, a very complex magnetic ground state, featuring the coexistence of long lengthscale 2D ordering and significant spin dynamics, is proposed. This is unusual considering the 3D topology of the Mn 3+ spins in this material

A mechanism for the formation and sustainment of the self-organized global profile and E   ×   B staircase in tokamak plasmas

Science.gov (United States)

Wang, W.; Kishimoto, Y.; Imadera, K.; Li, J. Q.; Wang, Z. X.

2018-05-01

The mechanism for the formation and sustainment of a self-organized global profile and the ‘ E   ×   B staircase’ are investigated through simulations of a flux-driven ion temperature gradient (ITG) turbulence based on GKNET, a 5D global gyrokinetic code. The staircase is found to be initiated from the radially extended ITG mode structures with nearly up-down symmetry during the saturation phase, and is established as it evolves into a quasi-steady turbulence, leading to a self-organized global temperature profile and to meso-scale isomorphic profiles of the radial electric field and the temperature gradient. It is found that the quasi-regular E   ×   B shear flow pattern is primarily originated from an even-symmetrical zonal flow produced by the extended ITG mode, which flow pattern exhibits an in-phase relation with the mean flow variation induced by the temperature relaxation. Consequently, the staircase is initiated through the profiles of total electric field and temperature gradient with a self-organized manner. Since the sign of E   ×   B shear flow at the central part are opposite to that at both edges, it disintegrates the ITG mode into smaller scale eddies. Meanwhile, smaller scale eddies tend to be aligned radially by spontaneous phase matching, which can provide the growth of mode amplitude and the formation of radially extended mode structures, leading to the bursty heat transport. This process is repeated quasi-periodically, sustaining self-organized structures and the E   ×   B staircase. Moreover, the equilibrium mean field is found to be of specific importance in causing the structures and dynamics from meso- to macro scales in toroidal plasmas.

Persistence of the gapless spin liquid in the breathing kagome Heisenberg antiferromagnet

Science.gov (United States)

Iqbal, Yasir; Poilblanc, Didier; Thomale, Ronny; Becca, Federico

2018-03-01

The nature of the ground state of the spin S =1 /2 Heisenberg antiferromagnet on the kagome lattice with breathing anisotropy (i.e., with different superexchange couplings J▵ and J▿ within elementary up- and down-pointing triangles) is investigated within the framework of Gutzwiller projected fermionic wave functions and Monte Carlo methods. We analyze the stability of the U(1 ) Dirac spin liquid with respect to the presence of fermionic pairing that leads to a gapped Z2 spin liquid. For several values of the ratio J▿/J▵ , the size scaling of the energy gain due to the pairing fields and the variational parameters are reported. Our results show that the energy gain of the gapped spin liquid with respect to the gapless state either vanishes for large enough system size or scales to zero in the thermodynamic limit. Similarly, the optimized pairing amplitudes (responsible for opening the spin gap) are shown to vanish in the thermodynamic limit. Our outcome is corroborated by the application of one and two Lanczos steps to the gapless and gapped wave functions, for which no energy gain of the gapped state is detected when improving the quality of the variational states. Finally, we discuss the competition with the "simplex" Z2 resonating-valence-bond spin liquid, valence-bond crystal, and nematic states in the strongly anisotropic regime, i.e., J▿≪J▵ .

Study of system-size effects on the emergent magnetic monopoles and Dirac strings in artificial kagome spin ice

Science.gov (United States)

Leon, Alejandro

2012-02-01

In this work we study the dynamical properties of a finite array of nanomagnets in artificial kagome spin ice at room temperature. The dynamic response of the array of nanomagnets is studied by implementing a ``frustrated celular aut'omata'' (FCA), based in the charge model. In this model, each dipole is replaced by a dumbbell of two opposite charges, which are situated at the neighbouring vertices of the honeycomb lattice. The FCA simulations, allow us to study in real-time and deterministic way, the dynamic of the system, with minimal computational resource. The update function is defined according to the coordination number of vertices in the system. Our results show that for a set geometric parameters of the array of nanomagnets, the system exhibits high density of Dirac strings and high density emergent magnetic monopoles. A study of the effect of disorder in the arrangement of nanomagnets is incorporated in this work.

'From grade B thrillers to deluxe chillers': prestige horror, female audiences, and allegories of spectatorship in The Spiral Staircase (1946)

OpenAIRE

Snelson, Tim

2009-01-01

This paper examines the prestige ‘shocker’ The Spiral Staircase (1946), suggesting that it challenges the perception of the decline in quality in the horror genre in the 1940s, as well as assumptions in scholarship that the genre has historically been addressed to a male audience. Whilst the film is usually discussed as a woman’s film, on release it was centred as part of a distinct shift in the horror genre from ‘grade B thrillers to deluxe chillers’. The reclassification of films like The S...

Novel conformal technique to reduce staircasing artifacts at material boundaries for FDTD modeling of the bioheat equation

Energy Technology Data Exchange (ETDEWEB)

Neufeld, E [Foundation for Research on Information Technologies in Society (IT' IS), ETH Zurich, 8092 Zurich (Switzerland); Chavannes, N [Foundation for Research on Information Technologies in Society (IT' IS), ETH Zurich, 8092 Zurich (Switzerland); Samaras, T [Radiocommunications Laboratory, Aristotle University of Thessaloniki, GR-54124 Thessaloniki (Greece); Kuster, N [Foundation for Research on Information Technologies in Society (IT' IS), ETH Zurich, 8092 Zurich (Switzerland)

2007-08-07

The modeling of thermal effects, often based on the Pennes Bioheat Equation, is becoming increasingly popular. The FDTD technique commonly used in this context suffers considerably from staircasing errors at boundaries. A new conformal technique is proposed that can easily be integrated into existing implementations without requiring a special update scheme. It scales fluxes at interfaces with factors derived from the local surface normal. The new scheme is validated using an analytical solution, and an error analysis is performed to understand its behavior. The new scheme behaves considerably better than the standard scheme. Furthermore, in contrast to the standard scheme, it is possible to obtain with it more accurate solutions by increasing the grid resolution.

Pressure effects on the physical properties of Kagome Cu3Bi(SeO3)2O2Cl metamagnet

Science.gov (United States)

Tseng, Wu-Jyun; Wu, Hung-Cheng; Yang, Pei-Ying; Kakarla, D. Chandrasekhar Kakarla; Yang, Hung-Duen; Low temperature physics Lab, Department of physics, National Sun Yat-Sen University Team

The effects of pressure on the structural and magnetic properties have been studied in Kagome Cu3Bi(Se1-xTexO3)2 O2Cl polycrystalline samples. The initial crystal structure Pmmn is gradually converted to Pcmn space group when x >= 0.6, which could be determined by synchrotron X-ray diffraction, Raman spectroscopy, and magnetization measurements. The antiferromagnetic transition temperature (TN) and the critical field (HC) of metamagnetic spin-flip transition increase, but the value of saturation magnetization (MS) decreases with Te doping concentration. Under external pressure, the TN and MS increase, while the HC reduces. These anisotropic pressure results could be explained by the modulation of competition between ferromagnetic intralayer and antiferromagnetic interlayer interactions. The route to control the metamagnetic spin-flip transition by anisotropic pressure effects might be helpful to understand the mechanism of field- induced multiferroic Cu3Bi(SeO3)2 O2Cl

Prediction and synthesis of a family of atomic laminate phases with Kagomé-like and in-plane chemical ordering

Science.gov (United States)

Dahlqvist, Martin; Lu, Jun; Meshkian, Rahele; Tao, Quanzheng; Hultman, Lars; Rosen, Johanna

2017-01-01

The enigma of MAX phases and their hybrids prevails. We probe transition metal (M) alloying in MAX phases for metal size, electronegativity, and electron configuration, and discover ordering in these MAX hybrids, namely, (V2/3Zr1/3)2AlC and (Mo2/3Y1/3)2AlC. Predictive theory and verifying materials synthesis, including a judicious choice of alloying M from groups III to VI and periods 4 and 5, indicate a potentially large family of thermodynamically stable phases, with Kagomé-like and in-plane chemical ordering, and with incorporation of elements previously not known for MAX phases, including the common Y. We propose the structure to be monoclinic C2/c. As an extension of the work, we suggest a matching set of novel MXenes, from selective etching of the A-element. The demonstrated structural design on simultaneous two-dimensional (2D) and 3D atomic levels expands the property tuning potential of functional materials. PMID:28776034

New data on the chronology of the Vale do Forno sedimentary sequence (Lower Tejo River terrace staircase) and its relevance as a fluvial archive of the Middle Pleistocene in western Iberia

DEFF Research Database (Denmark)

Cunha, Pedro; Martins, Antonio; Buylaert, Jan-Pieter

2017-01-01

The Vale do Forno archaeological sites (Alpiarça, central Portugal) document the earliest human occupation in the Lower Tejo River, well established in geomorphological and environmental terms, within the Middle Pleistocene. In a staircase of six fluvial terraces, the Palaeolithic sites were found...

A family of porous lonsdaleite-e networks obtained through pillaring of decorated kagomé lattice sheets

KAUST Repository

Schoedel, Alexander; Boyette, Wesley; Wojtas, Łukasz; Eddaoudi, Mohamed; Zaworotko, Michael J.

2013-01-01

A new and versatile class of metal-organic materials (MOMs) with augmented lonsdaleite-e (lon-e-a) topology is presented herein. This family of lon-e nets are built by pillaring of hexagonal two-dimensional kagomé (kag) lattices constructed from well-known [Zn2(CO2R)4] paddlewheel molecular building blocks (MBBs) connected by 1,3- benzenedicarboxylate (bdc2-) linkers. The pillars are [Cr 3(μ3-O)(RCO2)]6 trigonal prismatic primary MBBs decorated by six pyridyl moieties (tp-PMBB-1). The three-fold symmetry (D3h) of tp-PMBB-1 is complementary with the alternating orientation of the axial sites of the paddlewheel MBBs and enables triple cross-linking of the kag layers by each pillar. These MOMs represent the first examples of axial-to-axial pillared undulating kag layers, and they are readily fine-tuned because the bdc2- moieties can be varied at their 5-position without changing the overall structure. This lon-e platform possesses functionalized hexagonal channels since the kag lattices are necessarily eclipsed. The effects of the substituent at the 5-positions of the bdc 2- linkers upon gas adsorption, particularly the heats of adsorption of carbon dioxide and methane, were studied. © 2013 American Chemical Society.

A family of porous lonsdaleite-e networks obtained through pillaring of decorated kagomé lattice sheets

KAUST Repository

Schoedel, Alexander

2013-09-25

A new and versatile class of metal-organic materials (MOMs) with augmented lonsdaleite-e (lon-e-a) topology is presented herein. This family of lon-e nets are built by pillaring of hexagonal two-dimensional kagomé (kag) lattices constructed from well-known [Zn2(CO2R)4] paddlewheel molecular building blocks (MBBs) connected by 1,3- benzenedicarboxylate (bdc2-) linkers. The pillars are [Cr 3(μ3-O)(RCO2)]6 trigonal prismatic primary MBBs decorated by six pyridyl moieties (tp-PMBB-1). The three-fold symmetry (D3h) of tp-PMBB-1 is complementary with the alternating orientation of the axial sites of the paddlewheel MBBs and enables triple cross-linking of the kag layers by each pillar. These MOMs represent the first examples of axial-to-axial pillared undulating kag layers, and they are readily fine-tuned because the bdc2- moieties can be varied at their 5-position without changing the overall structure. This lon-e platform possesses functionalized hexagonal channels since the kag lattices are necessarily eclipsed. The effects of the substituent at the 5-positions of the bdc 2- linkers upon gas adsorption, particularly the heats of adsorption of carbon dioxide and methane, were studied. © 2013 American Chemical Society.

Tunable artificial vortex ice in nanostructured superconductors with a frustrated kagome lattice of paired antidots

Science.gov (United States)

Xue, C.; Ge, J.-Y.; He, A.; Zharinov, V. S.; Moshchalkov, V. V.; Zhou, Y. H.; Silhanek, A. V.; Van de Vondel, J.

2018-04-01

Theoretical proposals for spin-ice analogs based on nanostructured superconductors have suggested larger flexibility for probing the effects of fluctuations and disorder than in the magnetic systems. In this paper, we unveil the particularities of a vortex ice system by direct observation of the vortex distribution in a kagome lattice of paired antidots using scanning Hall probe microscopy. The theoretically suggested vortex ice distribution, lacking long-range order, is observed at half matching field (H1/2 ). Moreover, the vortex ice state formed by the pinned vortices is still preserved at 2 H1/3 . This unexpected result is attributed to the introduction of interstitial vortices at these magnetic-field values. Although the interstitial vortices increase the number of possible vortex configurations, it is clearly shown that the vortex ice state observed at 2 H1/3 is less prone to defects than at H1/2 . In addition, the nonmonotonic variations of the vortex ice quality on the lattice spacing indicates that a highly ordered vortex ice state cannot be attained by simply reducing the lattice spacing. The optimal design to observe defect-free vortex ice is discussed based on the experimental statistics. The direct observations of a tunable vortex ice state provides new opportunities to explore the order-disorder transition in artificial ice systems.

Coexistence of ferromagnetism and unconventional spin-glass freezing in the site-disordered kagome ferrite SrS n2F e4O11

Science.gov (United States)

Shlyk, L.; Strobel, S.; Farmer, B.; De Long, L. E.; Niewa, R.

2018-02-01

Single-crystal x-ray diffraction refinements indicate SrS n2F e4O11 crystallizes in the hexagonal R -type ferrite structure with noncentrosymmetric space group P 63m c and lattice parameters a =5.9541 (2 )Å , c =13.5761 (5 )Å , Z =2 (R (F )=0.034 ). Octahedrally coordinated 2 a [M (1) and M (1a)] and 6 c sites [M (2 )] have random, mixed occupation by Sn and Fe; whereas the tetrahedrally coordinated 2 b sites [Fe(3) and Fe(3a)] are exclusively occupied by Fe, whose displacement from the ideal position with trigonal-bipyramidal coordination causes the loss of inversion symmetry. Our dc and ac magnetization data indicate SrS n2F e4O11 single crystals undergo a ferro- or ferri-magnetic transition below a temperature TC=630 K with very low coercive fields μoHc ⊥=0.27 Oe and μoHc ∥=1.5 Oe at 300 K, for applied field perpendicular and parallel to the c axis, respectively. The value for TC is exceptionally high, and the coercive fields exceptionally low, among the known R-type ferrites. Time-dependent dc magnetization and frequency-dependent ac magnetization data indicate the onset of short-range, spin-glass freezing below Tf=35.8 K , which results from crystallographic disorder of magnetic F e3 + and nonmagnetic S n4 + ions on a frustrated Kagome sublattice. Anomalous ac susceptibility and thermomagnetic relaxation behavior in the short-range-ordered state differs from that of conventional spin glasses. Optical measurements in the ultraviolet to visible frequency range in a diffuse reflectance geometry indicate an overall optical band gap of 0.8 eV, consistent with observed semiconducting properties.

Tuning of magnetic frustration in S = 1 / 2 Kagomé lattices {[Cu3(CO3)2(bpe)3](CLO4)2}n and {[Cu3(CO3)2(bpy)3](CLO4)2}n through rigid and flexible ligands

Science.gov (United States)

Ajeesh, M. O.; Yogi, A.; Padmanabhan, M.; Nath, R.

2015-04-01

Single crystalline and polycrystalline samples of S = 1 / 2 Kagomé lattices { [Cu3(CO3)2(bpe)3 ](CLO4)2 } n and { [Cu3(CO3)2(bpy)3 ](CLO4)2 } n, respectively were synthesized. Their structural and magnetic properties were characterized by means of x-ray diffraction and magnetization measurements. Both compounds crystalize in a hexagonal structure (space group P-6) consisting of CuO4 Kagomé layers in the ab-plane but linked along c direction through either rigid bpy or flexible bpe ligands to form 3D frame works. Magnetic measurements reveal that both the compounds undergo ferromagnetic ordering (TC) at low temperatures and the TC and the extent of frustration could be tuned by changing the nature of the pillar ligands. {[Cu3(CO3)2(bpe)3](CLO4)2}n which is made up of flexible bpe ligands has a TC of 5.7 K and a Curie-Weiss temperature (θCW) of -39.7 K giving rise to a frustration parameter of |θCW | /TC ≃ 6.96. But the replacement of bpe by a more rigid and electronically delocalized bpy ligand leads to an enhanced TC ≃ 9.3 K and a reduced frustration parameter of |θCW | /TC ≃ 3.54.

Twist map, the extended Frenkel-Kontorova model and the devil's staircase

International Nuclear Information System (INIS)

Aubry, S.

1982-01-01

Exact results obtained on the discrete Frenkel Kontorova (FK) model and its extensions during the past few years are reviewed. These models are associated with area preserving twist maps of the cylinder (or a part of it) onto itself. The theorems obtained for the FK model thus yields new theorems for the twist maps. The exact structure of the ground-states which are either commensurate or incommensurate and assert the existence of elementary discommensurations under certain necessary and sufficient conditions is described. Necessary conditions for the trajectories to represent metastable configurations, which can be chaotic, are given. The existence of a finite Peierl Nabarro barrier for elementary discommensurations is connected with a property of non-integrability of the twist map. The existence of KAM tori corresponds to undefectible incommensurate ground-states and a theorem is given which asserts that when the phenon spectrum of an incommensurate ground-state exhibits a finite gap, then the corresponding trajectory is dense on a Cantor set with zero measure length. These theorems, when applied to the initial FK model, allows one to prove the existence of the transition by breaking of analyticity for the incommensurate structures when the parameter which describes the discrepancy of the model to the integrable limit varies. Finally, we describe a theorem proving the existence of a devil's staircase for the variation curve of the atomic mean distance versus a chemical potential, for certain properties of the twist map which are generally satisfied

Observation of Various and Spontaneous Magnetic Skyrmionic Bubbles at Room Temperature in a Frustrated Kagome Magnet with Uniaxial Magnetic Anisotropy

KAUST Repository

Hou, Zhipeng

2017-06-07

The quest for materials hosting topologically protected skyrmionic spin textures continues to be fueled by the promise of novel devices. Although many materials have demonstrated the existence of such spin textures, major challenges remain to be addressed before devices based on magnetic skyrmions can be realized. For example, being able to create and manipulate skyrmionic spin textures at room temperature is of great importance for further technological applications because they can adapt to various external stimuli acting as information carriers in spintronic devices. Here, the first observation of skyrmionic magnetic bubbles with variable topological spin textures formed at room temperature in a frustrated kagome Fe3 Sn2 magnet with uniaxial magnetic anisotropy is reported. The magnetization dynamics are investigated using in situ Lorentz transmission electron microscopy, revealing that the transformation between different magnetic bubbles and domains is via the motion of Bloch lines driven by an applied external magnetic field. These results demonstrate that Fe3 Sn2 facilitates a unique magnetic control of topological spin textures at room temperature, making it a promising candidate for further skyrmion-based spintronic devices.

Two-dimensionally modulated magnetic structure of neodymium, commensurate-commensurate transitions in CeSb, and the devil's staircase

International Nuclear Information System (INIS)

Bak, P.

1979-01-01

The magnetic structure of the rare-earth metal neodymium has remained a mystery for more than a decade. Recently, a magnetic structure which fits the experimental results has been reported [1]. Here it will be shown how the model was derived by combining neutron diffraction data with the results of Landau symmetry arguments and renormalization group theory. The spins form a fascinating two-dimensional pattern with hexagonal symmetry, the ''triple q'' structure. The magnetic order is accompanied by a lattice distortion with a similar symmetry. Also, the results of a numerical study of simple model of a one-dimensionally modulated system are reported [2]. The phase diagram includes multiple phase transitions between commensurate phases similar to those observed in CeSb. This model, and CeSb, are possible candidates for ''the devil's staircase'' behavior where the periodicity jumps between an infinity of commensurate values

Anisotropic pressure effects on the Kagome Cu3Bi(SeO3)2O2Cl metamagnet

Science.gov (United States)

Wu, H. C.; Tseng, W. J.; Yang, P. Y.; Chandrasekhar, K. D.; Berger, H.; Yang, H. D.

2017-07-01

The anisotropic spin-flip-induced multiferroic property of the Kagome single-crystal Cu3Bi(SeO3)2O2Cl was recently investigated. The doping effects on the structural and magnetic properties of Cu3Bi(Se1-x Te x O3)2O2Cl (0 ≤slant x≤slant 0.6) polycrystalline samples were studied to further explore and manipulate the metamagnetic spin-flip transition. With higher Te concentration, the lattice constants a and b exhibit a linear increase, whereas the lattice constant c gradually decreases, which indicates that the anisotropic expansion and compression effect is induced by Te substitution in the Se site. Subsequently, the antiferromagnetic transition (T N) shifts to a higher temperature, the critical field ({{H}\\text{c}} ) of the metamagnetic spin-flip transition increases, and the value of the saturation magnetisation ({{M}\\text{s}} ) diminishes. Meanwhile, the effects of isotropic expansion (with Br doping) and compression (with external pressure) do not show a clear influence on the spin-flip phenomena. Our results emphasise the introduction of anisotropic pressure in Cu3Bi(SeO3)2O2Cl, which modulates the magnetic interaction of Cu (I)-O1-Cu (I) and Cu (I)-O1-Cu (II) and, consequently, enhances the {{H}\\text{c}} of the spin-flip transition.

A case study of energy expenditure based on walking speed reduction during walking upstairs situation at a staircase in FKAAS, UTHM, Johor building

Science.gov (United States)

Abustan, M. S.; Ali, M. F. M.; Talib, S. H. A.

2018-04-01

Walking velocity is a vector quantity that can be determined by calculating the time taken and displacement of a moving objects. In Malaysia, there are very few researches that were done to determine the walking velocity of citizens to be compared with other countries such as the study about walking upstairs during evacuation process is important when emergency case happen, if there are people in underground garages, they have to walk upstairs for exits and look for shelter and the walking velocity of pedestrian in such cases are necessary to be analysed. Therefore, the objective of this study is to determine the walking speed of pedestrian during walking upstairs situation, finding the relationship between pedestrian walking speed and the characteristics of the pedestrian as well as analysing the energy reduction by comparing the walking speed of pedestrian at the beginning and at the end of staircase. In this case study, an experiment was done to determine the average walking speed of pedestrian. The pedestrian has been selected from different gender, physical character, and age. Based on the data collected, the average normal walking speed of male pedestrian was 1.03 m/s while female was 1.08 m/s. During walking upstairs, the walking speed of pedestrian decreased as the number of floor increased. The average speed for the first stairwell was 0.90 m/s and the number decreased to 0.73 m/s for the second stairwell. From the reduction of speed, the energy used has been calculated and the average kinetic energy used was 1.69 J. Hence, the data collected can be used for further research of staircase design and plan of evacuation process.

A mixed-order nonlinear diffusion compressed sensing MR image reconstruction.

Science.gov (United States)

Joy, Ajin; Paul, Joseph Suresh

2018-03-07

Avoid formation of staircase artifacts in nonlinear diffusion-based MR image reconstruction without compromising computational speed. Whereas second-order diffusion encourages the evolution of pixel neighborhood with uniform intensities, fourth-order diffusion considers smooth region to be not necessarily a uniform intensity region but also a planar region. Therefore, a controlled application of fourth-order diffusivity function is used to encourage second-order diffusion to reconstruct the smooth regions of the image as a plane rather than a group of blocks, while not being strong enough to introduce the undesirable speckle effect. Proposed method is compared with second- and fourth-order nonlinear diffusion reconstruction, total variation (TV), total generalized variation, and higher degree TV using in vivo data sets for different undersampling levels with application to dictionary learning-based reconstruction. It is observed that the proposed technique preserves sharp boundaries in the image while preventing the formation of staircase artifacts in the regions of smoothly varying pixel intensities. It also shows reduced error measures compared with second-order nonlinear diffusion reconstruction or TV and converges faster than TV-based methods. Because nonlinear diffusion is known to be an effective alternative to TV for edge-preserving reconstruction, the crucial aspect of staircase artifact removal is addressed. Reconstruction is found to be stable for the experimentally determined range of fourth-order regularization parameter, and therefore not does not introduce a parameter search. Hence, the computational simplicity of second-order diffusion is retained. © 2018 International Society for Magnetic Resonance in Medicine.

NMR Study of the S=1/2 Quantum Kagome Lattice Antiferromagnet [Cu_3(titmb)_2(CH_3CO_2)_6]・H_2O(Frustrated Systems, Field-Induced Phase Transitions and Dynamics in Quantum Spin Systems)

OpenAIRE

Satoru, MAEGAWA; Kenji, YOSHIOKA; Shinichi, KAWAHARA; Akira, OYAMADA; Kenichi, FUJITA; Ryohei, YAMAGUCHI; Graduate School of Human and Environmental Studies, Kyoto University; Graduate School of Human and Environmental Studies, Kyoto University; Graduate School of Human and Environmental Studies, Kyoto University; Graduate School of Human and Environmental Studies, Kyoto University; Graduate School of Human and Environmental Studies, Kyoto University; Graduate School of Human and Environmental Studies, Kyoto University

2005-01-01

A quantum kagome lattice magnet, [Cu_3(titmb)_2(CH_3CO_2)_6]・H_2O with s=1/2 has been studied by magnetization and NMR experiments. No magnetic phase transition was observed down to 180mK. The spin-lattice relaxation rate T^_1 above 20K is almost temperature independent, while below 10K the rates decrease sharply as the temperature is decreased, and can be described as T^_1=B exp(-△/κ_BT). The field dependence on the energy gap △ has been obtained and is found to show plateaus between 3.2 and...

Enhanced fatigue endurance of metallic glasses through a staircase-like fracture mechanism.

Science.gov (United States)

Gludovatz, Bernd; Demetriou, Marios D; Floyd, Michael; Hohenwarter, Anton; Johnson, William L; Ritchie, Robert O

2013-11-12

Bulk-metallic glasses (BMGs) are now candidate materials for structural applications due to their exceptional strength and toughness. However, their fatigue resistance can be poor and inconsistent, severely limiting their potential as reliable structural materials. As fatigue limits are invariably governed by the local arrest of microscopically small cracks at microstructural features, the lack of microstructure in monolithic glasses, often coupled with other factors, such as the ease of crack formation in shear bands or a high susceptibility to corrosion, can lead to low fatigue limits (some ~1/20 of their tensile strengths) and highly variable fatigue lives. BMG-matrix composites can provide a solution here as their duplex microstructures can arrest shear bands at a second phase to prevent cracks from exceeding critical size; under these conditions, fatigue limits become comparable with those of crystalline alloys. Here, we report on a Pd-based glass that similarly has high fatigue resistance but without a second phase. This monolithic glass displays high intrinsic toughness from extensive shear-band proliferation with cavitation and cracking effectively obstructed. We find that this property can further promote fatigue resistance through extrinsic crack-tip shielding, a mechanism well known in crystalline metals but not previously reported in BMGs, whereby cyclically loaded cracks propagate in a highly "zig-zag" manner, creating a rough "staircase-like" profile. The resulting crack-surface contact (roughness-induced crack closure) elevates fatigue properties to those comparable to crystalline alloys, and the accompanying plasticity helps to reduce flaw sensitivity in the glass, thereby promoting structural reliability.

Devil's staircase and the absence of chaos in the dc- and ac-driven overdamped Frenkel-Kontorova model

Science.gov (United States)

Sokolović, I.; Mali, P.; Odavić, J.; Radošević, S.; Medvedeva, S. Yu.; Botha, A. E.; Shukrinov, Yu. M.; Tekić, J.

2017-08-01

The devil's staircase structure arising from the complete mode locking of an entirely nonchaotic system, the overdamped dc+ac driven Frenkel-Kontorova model with deformable substrate potential, was observed. Even though no chaos was found, a hierarchical ordering of the Shapiro steps was made possible through the use of a previously introduced continued fraction formula. The absence of chaos, deduced here from Lyapunov exponent analyses, can be attributed to the overdamped character and the Middleton no-passing rule. A comparative analysis of a one-dimensional stack of Josephson junctions confirmed the disappearance of chaos with increasing dissipation. Other common dynamic features were also identified through this comparison. A detailed analysis of the amplitude dependence of the Shapiro steps revealed that only for the case of a purely sinusoidal substrate potential did the relative sizes of the steps follow a Farey sequence. For nonsinusoidal (deformed) potentials, the symmetry of the Stern-Brocot tree, depicting all members of particular Farey sequence, was seen to be increasingly broken, with certain steps being more prominent and their relative sizes not following the Farey rule.

Myosin phosphorylation improves contractile economy of mouse fast skeletal muscle during staircase potentiation.

Science.gov (United States)

Bunda, Jordan; Gittings, William; Vandenboom, Rene

2018-01-30

Phosphorylation of the myosin regulatory light chain (RLC) by skeletal myosin light chain kinase (skMLCK) potentiates rodent fast twitch muscle but is an ATP-requiring process. Our objective was to investigate the effect of skMLCK-catalyzed RLC phosphorylation on the energetic cost of contraction and the contractile economy (ratio of mechanical output to metabolic input) of mouse fast twitch muscle in vitro (25°C). To this end, extensor digitorum longus (EDL) muscles from wild-type (WT) and from skMLCK-devoid (skMLCK -/- ) mice were subjected to repetitive low-frequency stimulation (10 Hz for 15 s) to produce staircase potentiation of isometric twitch force, after which muscles were quick frozen for determination of high-energy phosphate consumption (HEPC). During stimulation, WT muscles displayed significant potentiation of isometric twitch force while skMLCK -/- muscles did not (i.e. 23% versus 5% change, respectively). Consistent with this, RLC phosphorylation was increased ∼3.5-fold from the unstimulated control value in WT but not in skMLCK -/- muscles. Despite these differences, the HEPC of WT muscles was not greater than that of skMLCK -/- muscles. As a result of the increased contractile output relative to HEPC, the calculated contractile economy of WT muscles was greater than that of skMLCK -/- muscles. Thus, our results suggest that skMLCK-catalyzed phosphorylation of the myosin RLC increases the contractile economy of WT mouse EDL muscle compared with skMLCK -/- muscles without RLC phosphorylation. © 2018. Published by The Company of Biologists Ltd.

Novel Eye Movement Disorders in Whipple’s Disease—Staircase Horizontal Saccades, Gaze-Evoked Nystagmus, and Esotropia

Directory of Open Access Journals (Sweden)

Aasef G. Shaikh

2017-07-01

Full Text Available Whipple’s disease, a rare systemic infectious disorder, is complicated by the involvement of the central nervous system in about 5% of cases. Oscillations of the eyes and the jaw, called oculo-masticatory myorhythmia, are pathognomonic of the central nervous system involvement but are often absent. Typical manifestations of the central nervous system Whipple’s disease are cognitive impairment, parkinsonism mimicking progressive supranuclear palsy with vertical saccade slowing, and up-gaze range limitation. We describe a unique patient with the central nervous system Whipple’s disease who had typical features, including parkinsonism, cognitive impairment, and up-gaze limitation; but also had diplopia, esotropia with mild horizontal (abduction more than adduction limitation, and vertigo. The patient also had gaze-evoked nystagmus and staircase horizontal saccades. Latter were thought to be due to mal-programmed small saccades followed by a series of corrective saccades. The saccades were disconjugate due to the concurrent strabismus. Also, we noted disconjugacy in the slow phase of gaze-evoked nystagmus. The disconjugacy of the slow phase of gaze-evoked nystagmus was larger during monocular viewing condition. We propose that interaction of the strabismic drifts of the covered eyes and the nystagmus drift, putatively at the final common pathway might lead to such disconjugacy.

Theoretical aspects of several successive two-step redox mechanisms in protein-film cyclic staircase voltammetry

International Nuclear Information System (INIS)

Gulaboski, Rubin; Kokoškarova, Pavlinka; Mitrev, Saša

2012-01-01

Highlights: ► Theoretical models for 2e− successive mechanisms are considered. ► The models are compatible for various metal-containing redox proteins. ► Diagnostic criteria are provided to recognize the particular redox mechanism. - Abstract: Protein-film voltammetry (PFV) is a versatile tool designed to provide insight into the enzymes physiological functions by studying the redox properties of various oxido-reductases with suitable voltammetric technique. The determination of the thermodynamic and kinetic parameters relevant to protein's physiological properties is achieved via methodologies established from theoretical considerations of various mechanisms in PFV. So far, the majority of the mathematical models in PFV have been developed for redox proteins undergoing a single-step electron transfer reactions. However, there are many oxido-reductases containing quinone moieties or polyvalent ions of transition metals like Mo, Mn, W, Fe or Co as redox centers, whose redox chemistry can be described only via mathematical models considering successive two-step electron transformation. In this work we consider theoretically the protein-film redox mechanisms of the EE (Electrochemical–Electrochemical), ECE (Electrochemical–Chemical–Electrochemical), and EECat (Electrochemical–Electrochemical–Catalytic) systems under conditions of cyclic staircase voltammetry. We also propose methodologies to determine the kinetics of electron transfer steps by all considered mechanisms. The experimentalists working with PFV can get large benefits from the simulated voltammograms given in this work.

Compact, integrable, and long life time Raman multiline UV-Vis source based on hypocycloid core Kagome HC-PCF

Science.gov (United States)

Chafer, M.; Lekiefs, Q.; Gorse, A.; Beaudou, B.; Debord, B.; Gérôme, F.; Benabid, F.

2017-02-01

Raman-gas filled HC-PCF has proved to be an outstanding Raman-convertor, as illustrated by the generation of more than 5 octaves wide Raman comb using a hydrogen-filled Kagome HC-PCF pumped with high power picosecond-laser, or the generation of multiline Raman-source in the UV-Vis using a very compact system pumped with micro-chip laser. Whilst these demonstrations are promising, a principal challenge for the industrialization of such a Raman source is its lifetime as the H2 diffusion through silica is high enough to leak out from the fiber within only a few months. Here, we report on a HC-PCF based Raman multiline source with a very long life-span. The system consists of hydrogen filled ultra-low loss HC-PCF contained in highly sealed box, coined CombBox, and pumped with a 532 nm micro-chip laser. This combination is a turnkey multiline Raman-source with a "shoe box" size. The CombBox is a robust and compact component that can be integrated and pumped with any common pulsed laser. When pumped with a 32 mW average power and 1 ns frequency-doubled Nd:Yag microchip laser, this Raman-source generates 24 lines spanning from 355 to 745 nm, and a peak power density per line of 260 mW/nm for the strongest lines. Both the output power and the spectrum remained constant over its monitoring duration of more than six months. The spectrum of this multiline laser superimposes with no less than 17 absorption peaks of fluorescent dyes from the Alexa Fluor family used as biological markers.

Symmetrical Staircase in the Profile of Lattice-Modulation Period versus Pr-Concentration in Bi 2Sr 2(Ca 1-xPrx)Cu 2O 8+δ

Science.gov (United States)

Onozuka, Takashi; Niizeki, Komajiro

1998-09-01

Variation of the lattice-modulation period p a of the “incommensurate” phase Bi2Br2(Ca1-xPrx)Cu2O8+δ (0≦x≦0.72) with Pr-concentration x was examined by electron diffraction. The plot of p a versus x exhibits roughly a linear decrease but it has a staircase structure. The period of each stair, p a, agrees with a value expected for a commensurate structure. We observed nine stairs which are symmetrically arranged; the central stair corresponds to the primary structure with a simple modulation, and a stair on the left (or right) corresponds to a structure which is derived from the primary structure by introducing an advanced (or delayed) discommensuration. The observed structures cover a full range of commensurate structures predicted theoretically.

The Hintermann-Merlini-Baxter-Wu and the infinite-coupling-limit Ashkin-Teller models

Energy Technology Data Exchange (ETDEWEB)

Huang Yuan, E-mail: huangy22@mail.ustc.edu.cn [Hefei National Laboratory for Physical Sciences at Microscale and Department of Modern Physics, University of Science and Technology of China, Hefei, Anhui 230026 (China); Deng Youjin, E-mail: yjdeng@ustc.edu.cn [Hefei National Laboratory for Physical Sciences at Microscale and Department of Modern Physics, University of Science and Technology of China, Hefei, Anhui 230026 (China); Jacobsen, Jesper Lykke, E-mail: jacobsen@lpt.ens.fr [Laboratoire de Physique Theorique, Ecole Normale Superieure, 24 rue Lhomond, 75231 Paris (France); Universite Pierre et Marie Curie, 4 place Jussieu, 75252 Paris (France); Salas, Jesus, E-mail: jsalas@math.uc3m.es [Grupo de Modelizacion, Simulacion Numerica y Matematica Industrial, Universidad Carlos III de Madrid, Avda. de la Universidad 30, 28911 Leganes (Spain); Grupo de Teorias de Campos y Fisica Estadistica, Instituto Gregorio Millan, Universidad Carlos III de Madrid, Unidad asociada al IEM-CSIC, Madrid (Spain)

2013-03-11

We show how the Hintermann-Merlini-Baxter-Wu model (which is a generalization of the well-known Baxter-Wu model to a general Eulerian triangulation) can be mapped onto a particular infinite-coupling-limit of the Ashkin-Teller model. We work out some mappings among these models, also including the standard and mixed Ashkin-Teller models. Finally, we compute the phase diagram of the infinite-coupling-limit Ashkin-Teller model on the square, triangular, hexagonal, and kagome lattices.

Complete devil's staircase and crystal-superfluid transitions in a dipolar XXZ spin chain: a trapped ion quantum simulation

International Nuclear Information System (INIS)

Hauke, Philipp; Cucchietti, Fernando M; Lewenstein, Maciej; Mueller-Hermes, Alexander; Banuls, Mari-Carmen; Ignacio Cirac, J

2010-01-01

Systems with long-range interactions show a variety of intriguing properties: they typically accommodate many metastable states, they can give rise to spontaneous formation of supersolids, and they can lead to counterintuitive thermodynamic behavior. However, the increased complexity that comes with long-range interactions strongly hinders theoretical studies. This makes a quantum simulator for long-range models highly desirable. Here, we show that a chain of trapped ions can be used to quantum simulate a one-dimensional (1D) model of hard-core bosons with dipolar off-site interaction and tunneling, equivalent to a dipolar XXZ spin-1/2 chain. We explore the rich phase diagram of this model in detail, employing perturbative mean-field theory, exact diagonalization and quasi-exact numerical techniques (density-matrix renormalization group and infinite time-evolving block decimation). We find that the complete devil's staircase-an infinite sequence of crystal states existing at vanishing tunneling-spreads to a succession of lobes similar to the Mott lobes found in Bose-Hubbard models. Investigating the melting of these crystal states at increased tunneling, we do not find (contrary to similar 2D models) clear indications of supersolid behavior in the region around the melting transition. However, we find that inside the insulating lobes there are quasi-long-range (algebraic) correlations, as opposed to models with nearest-neighbor tunneling, that show exponential decay of correlations.

Structure and Evolution of Thermohaline Staircases in Tropical North Atlantic

National Research Council Canada - National Science Library

Wall, Steven

2007-01-01

.... Salt finger convection is generally observed in mid-latitude regions, particularly in the Atlantic Ocean and Mediterranean Sea, between the hase of the mixed layer and the top of the intermediate water...

Topological magnon bands in ferromagnetic star lattice

International Nuclear Information System (INIS)

Owerre, S A

2017-01-01

The experimental observation of topological magnon bands and thermal Hall effect in a kagomé lattice ferromagnet Cu(1–3, bdc) has inspired the search for topological magnon effects in various insulating ferromagnets that lack an inversion center allowing a Dzyaloshinskii–Moriya (DM) spin–orbit interaction. The star lattice (also known as the decorated honeycomb lattice) ferromagnet is an ideal candidate for this purpose because it is a variant of the kagomé lattice with additional links that connect the up-pointing and down-pointing triangles. This gives rise to twice the unit cell of the kagomé lattice, and hence more interesting topological magnon effects. In particular, the triangular bridges on the star lattice can be coupled either ferromagnetically or antiferromagnetically which is not possible on the kagomé lattice ferromagnets. Here, we study DM-induced topological magnon bands, chiral edge modes, and thermal magnon Hall effect on the star lattice ferromagnet in different parameter regimes. The star lattice can also be visualized as the parent material from which topological magnon bands can be realized for the kagomé and honeycomb lattices in some limiting cases. (paper)

Topological magnon bands in ferromagnetic star lattice.

Science.gov (United States)

Owerre, S A

2017-05-10

The experimental observation of topological magnon bands and thermal Hall effect in a kagomé lattice ferromagnet Cu(1-3, bdc) has inspired the search for topological magnon effects in various insulating ferromagnets that lack an inversion center allowing a Dzyaloshinskii-Moriya (DM) spin-orbit interaction. The star lattice (also known as the decorated honeycomb lattice) ferromagnet is an ideal candidate for this purpose because it is a variant of the kagomé lattice with additional links that connect the up-pointing and down-pointing triangles. This gives rise to twice the unit cell of the kagomé lattice, and hence more interesting topological magnon effects. In particular, the triangular bridges on the star lattice can be coupled either ferromagnetically or antiferromagnetically which is not possible on the kagomé lattice ferromagnets. Here, we study DM-induced topological magnon bands, chiral edge modes, and thermal magnon Hall effect on the star lattice ferromagnet in different parameter regimes. The star lattice can also be visualized as the parent material from which topological magnon bands can be realized for the kagomé and honeycomb lattices in some limiting cases.

Neutron diffraction study and theoretical analysis of the antiferromagnetic order and the diffuse scattering in the layered kagome system CaBaCo2Fe2O7

Science.gov (United States)

Reim, J. D.; Rosén, E.; Zaharko, O.; Mostovoy, M.; Robert, J.; Valldor, M.; Schweika, W.

2018-04-01

The hexagonal swedenborgite, CaBaCo2Fe2O7 , is a chiral frustrated antiferromagnet, in which magnetic ions form alternating kagome and triangular layers. We observe a long-range √{3 }×√{3 } antiferromagnetic order setting in below TN=160 K by neutron diffraction on single crystals of CaBaCo2Fe2O7 . Both magnetization and polarized neutron single crystal diffraction measurements show that close to TN spins lie predominantly in the a b plane, while upon cooling the spin structure becomes increasingly canted due to Dzyaloshinskii-Moriya interactions. The ordered structure can be described and refined within the magnetic space group P 31 m' . Diffuse scattering between the magnetic peaks reveals that the spin order is partial. Monte Carlo simulations based on a Heisenberg model with two nearest-neighbor exchange interactions show a similar diffuse scattering and coexistence of the √{3 }×√{3 } order with disorder. The coexistence can be explained by the freedom to vary spins without affecting the long-range order, which gives rise to ground-state degeneracy. Polarization analysis of the magnetic peaks indicates the presence of long-period cycloidal spin correlations resulting from the broken inversion symmetry of the lattice, in agreement with our symmetry analysis.

Effective-field renormalization-group method for Ising systems

Science.gov (United States)

Fittipaldi, I. P.; De Albuquerque, D. F.

1992-02-01

A new applicable effective-field renormalization-group (ERFG) scheme for computing critical properties of Ising spins systems is proposed and used to study the phase diagrams of a quenched bond-mixed spin Ising model on square and Kagomé lattices. The present EFRG approach yields results which improves substantially on those obtained from standard mean-field renormalization-group (MFRG) method. In particular, it is shown that the EFRG scheme correctly distinguishes the geometry of the lattice structure even when working with the smallest possible clusters, namely N'=1 and N=2.

Provenance of marbles used for building the internal spiral staircase of the bell tower of St. Nicholas Church (Pisa, Italy)

Science.gov (United States)

Lezzerini, Marco; Antonelli, Fabrizio; Gallello, Gianni; Ramacciotti, Mirco; Parodi, Luca; Alberti, Antonio; Pagnotta, Stefano; Legnaioli, Stefano; Palleschi, Vincenzo

2017-05-01

The aim of this study is to investigate the provenance of marbles used as architectural elements (bases, shafts and capitals of columns) for building the internal spiral staircase of the medieval bell tower of St. Nicholas Church at Pisa, Italy. Accordingly, the 45 collected marble samples have been analysed by optical microscopy, X-ray powder diffraction and mass spectroscopy for carbon and oxygen stable isotope ratio analysis; additionally, SEM-EDS analysis have been performed to complement data about accessory minerals. By comparison with literature data on the main sources of the white Mediterranean marbles used in ancient times, the results show that the analysed samples are mainly white crystalline marbles from Carrara (Italy) and, subordinately, from other Tuscan and Eastern Mediterranean quarrying areas. In fact, Mt. Pisano and Campiglia M.ma (Tuscany, Italy) and Marmara (Turkey), Paros, Mt. Penteli, Thasos (Greece) are minor sources. The other coloured stones identified on the strength of their macroscopic features are quartzites from Mt. Pisano area and granitoids from Sardinia and Island of Elba (Italy). Occasionally, a very limited number of architectonical elements made up of Acquabona limestone from Rosignano Marittimo (Livorno, Italy), red limestone with ammonites (the so-called "Rosso Ammonitico") and black limestone belonging to the Tuscan Nappe sequence, outcropping at northwest of Pisa in the nearby Monti d'Oltre Serchio area, are present.

A Digital Image Denoising Algorithm Based on Gaussian Filtering and Bilateral Filtering

Directory of Open Access Journals (Sweden)

Piao Weiying

2018-01-01

Full Text Available Bilateral filtering has been applied in the area of digital image processing widely, but in the high gradient region of the image, bilateral filtering may generate staircase effect. Bilateral filtering can be regarded as one particular form of local mode filtering, according to above analysis, an mixed image de-noising algorithm is proposed based on Gaussian filter and bilateral filtering. First of all, it uses Gaussian filter to filtrate the noise image and get the reference image, then to take both the reference image and noise image as the input for range kernel function of bilateral filter. The reference image can provide the image’s low frequency information, and noise image can provide image’s high frequency information. Through the competitive experiment on both the method in this paper and traditional bilateral filtering, the experimental result showed that the mixed de-noising algorithm can effectively overcome staircase effect, and the filtrated image was more smooth, its textural features was also more close to the original image, and it can achieve higher PSNR value, but the amount of calculation of above two algorithms are basically the same.

Ocean stratification reduces melt rates at the grounding zone of the Ross Ice Shelf

Science.gov (United States)

Begeman, C. B.; Tulaczyk, S. M.; Marsh, O.; Mikucki, J.; Stanton, T. P.; Hodson, T. O.; Siegfried, M. R.; Powell, R. D.; Christianson, K. A.; King, M. A.

2017-12-01

Ocean-driven melting of ice shelves is often invoked as the primary mechanism for triggering ice loss from Antarctica. However, due to the difficulty in accessing the sub-ice-shelf ocean cavity, the relationship between ice-shelf melt rates and ocean conditions is poorly understood, particularly near the transition from grounded to floating ice, known as the grounding zone. Here we present the first borehole oceanographic observations from the grounding zone of Antarctica's largest ice shelf. Contrary to predictions that tidal currents near grounding zones should mix the water column, driving high ice-shelf melt rates, we find a stratified sub-ice-shelf water column. The vertical salinity gradient dominates stratification over a weakly unstable vertical temperature gradient; thus, stratification takes the form of a double-diffusive staircase. These conditions limit vertical heat fluxes and lead to low melt rates in the ice-shelf grounding zone. While modern grounding zone melt rates may presently be overestimated in models that assume efficient tidal mixing, the high sensitivity of double-diffusive staircases to ocean freshening and warming suggests future melt rates may be underestimated, biasing projections of global sea-level rise.

Symmetrical Staircase in the Profile of Lattice-Modulation Period versus Pr-Concentration and Domain Configurations in Bi 2Sr 2(Ca 1-xPrx)Cu 2O 8+δ

Science.gov (United States)

Onozuka, Takashi; Niizeki, Komajiro

2000-04-01

Variation of the lattice-modulation period p a of the`incommensurate' phase Bi2Sr2(Ca1-xPrx)Cu2O8+δ(0≦x≦0.72) with Pr-concentration x was examinedby electron diffraction, and the domain configuration byhigh-resolution transmission electron microscopy (HRTEM). The plotof p a versus x exhibits roughly a linear decreasebut it has a staircase structure. The period of each stair,p a, agrees with a value expected for a commensuratestructure. We observed nine stairs which are symmetricallyarranged; the central stair corresponds to the primary structurewith a simple modulation, and a stair on the left (or right) isassociated with an advanced (or delayed) discommensuration. On theother hand, the number of domain configurations i.e. commensuratestructures observed by HRTEM is seventeen. The observed staircasestructure covers a full range of commensurate structures predictedtheoretically. The pattern observed in the plot of p aversus x is consistent with the simulation based on theFrenkel-Kontrova model and an inhomogeneity hypothesis.

Topological honeycomb magnon Hall effect: A calculation of thermal Hall conductivity of magnetic spin excitations

Energy Technology Data Exchange (ETDEWEB)

Owerre, S. A., E-mail: solomon@aims.ac.za [African Institute for Mathematical Sciences, 6 Melrose Road, Muizenberg, Cape Town 7945, South Africa and Perimeter Institute for Theoretical Physics, 31 Caroline St. N., Waterloo, Ontario N2L 2Y5 (Canada)

2016-07-28

Quite recently, the magnon Hall effect of spin excitations has been observed experimentally on the kagome and pyrochlore lattices. The thermal Hall conductivity κ{sup xy} changes sign as a function of magnetic field or temperature on the kagome lattice, and κ{sup xy} changes sign upon reversing the sign of the magnetic field on the pyrochlore lattice. Motivated by these recent exciting experimental observations, we theoretically propose a simple realization of the magnon Hall effect in a two-band model on the honeycomb lattice. The magnon Hall effect of spin excitations arises in the usual way via the breaking of inversion symmetry of the lattice, however, by a next-nearest-neighbour Dzyaloshinsky-Moriya interaction. We find that κ{sup xy} has a fixed sign for all parameter regimes considered. These results are in contrast to the Lieb, kagome, and pyrochlore lattices. We further show that the low-temperature dependence on the magnon Hall conductivity follows a T{sup 2} law, as opposed to the kagome and pyrochlore lattices. These results suggest an experimental procedure to measure thermal Hall conductivity within a class of 2D honeycomb quantum magnets and ultracold atoms trapped in a honeycomb optical lattice.

The effect of electron and hole doping on the thermoelectric properties of shandite-type Co3Sn2S2

Science.gov (United States)

Mangelis, Panagiotis; Vaqueiro, Paz; Jumas, Jean-Claude; da Silva, Ivan; Smith, Ronald I.; Powell, Anthony V.

2017-07-01

Electron and hole doping in Co3Sn2S2, through chemical substitution of cobalt by the neighbouring elements, nickel and iron, affects both the structure and thermoelectric properties. Electron doping to form Co3-xNixSn2S2 (0≤x≤3) results in an expansion of the kagome layer and materials become increasingly metallic as cobalt is substituted. Conversely, hole doping in Co3-xFexSn2S2 (0≤x≤0.6) leads to a transition from metallic to n-type semiconducting behaviour at x=0.5. Iron substitution induces a small increase in the separation between the kagome layers and improves the thermoelectric performance. Neutron diffraction data reveal that substitution occurs at the Co 9(d) site in a disordered fashion. Mössbauer spectroscopy reveals two iron environments with very different isomer shifts, which may be indicative of a mixed-valence state, while Sn exhibits an oxidation state close to zero in both series. Co2.6Fe0.4Sn2S2 exhibits a maximum figure-of-merit, ZT=0.2 at 523 K while Co2.4Fe0.6Sn2S2 reaches a power factor of 10.3 μW cm-1 K-2 close to room temperature.

SPA-LEED Study of the Morphology and Nucleation of a Novel Growth Mode and the ''devil's staircase'' on Pb/Si(111)

International Nuclear Information System (INIS)

Wang-Chi Vincent Yeh

2003-01-01

This thesis was developed to address the following questions for the Pb/Si(111) system: (1) Is it possible to control the nano-structure growth by changing the initial substrate; (2) is the nucleation theory applicable to the case of the 7-step growth mode; and (3) what phase or phases could be formed between coverage 6/5 ML and 4/3 ML? The first question was answered in chapter 2, different growth results were observed for different initial substrate, suggesting the possibility of controlling nano-structure growth by selecting the initial substrate. The applicability of nucleation theory was determined to be unclear in chapter 3, from the results that the saturation island density does not depend on deposition rate, in contrary to the prediction of nucleation theory. Chapter 4 revealed a novel ''devil's staircase'' in Pb/Si(111) within the coverage range 6/5 ML and 4/3 ML. Low temperature deposition experiments showed high order of self-organization in such a system. Theoretical studies are needed to understand such a low temperature behavior. In general, this thesis provides possibilities of controlling nano-structure growth, which can be possibly an indication for future application. It also raises interesting questions in fundamental researches: a modified theory of nucleation is needed, and a detailed study of low temperature behavior is required. Details of the conclusions in each of the chapters are collected in the following sections

Juxtaposition of the changes in intracellular calcium and force during staircase potentiation at 30 and 37°C

Science.gov (United States)

Vandenboom, Rene

2014-01-01

Ca2+ entry during the action potential stimulates muscle contraction. During repetitive low frequency stimulation, skeletal muscle undergoes staircase potentiation (SP), a progressive increase in the peak twitch force induced by each successive stimulus. Multiple mechanisms, including myosin regulatory light chain phosphorylation, likely contribute to SP, a temperature-dependent process. Here, we used the Ca2+-sensitive fluorescence indicators acetoxymethyl (AM)-furaptra and AM-fura-2 to examine the intracellular Ca2+ transient (ICT) and the baseline Ca2+ level at the onset of each ICT during SP at 30 and 37°C in mouse lumbrical muscle. The stimulation protocol, 8 Hz for 8 s, resulted in a 27 ± 3% increase in twitch force at 37°C and a 7 ± 2% decrease in twitch force at 30°C (P < 0.05). Regardless of temperature, the peak rate of force production (+df/dt) was higher in all twitches relative to the first twitch (P < 0.05). Consistent with the differential effects of stimulation on twitch force at the two temperatures, raw ICT amplitude decreased during repetitive stimulation at 30°C (P < 0.05) but not at 37°C. Cytosolic Ca2+ accumulated during SP such that baseline Ca2+ at the onset of ICTs occurring late in the train was higher (P < 0.05) than that of those occurring early in the train. ICT duration increased progressively at both temperatures. This effect was not entirely proportional to the changes in twitch duration, as twitch duration characteristically decreased before increasing late in the protocol. This is the first study identifying a changing ICT as an important, and temperature-sensitive, modulator of muscle force during repetitive stimulation. Moreover, we extend previous observations by demonstrating that contraction-induced increases in baseline Ca2+ coincide with greater +df/dt but not necessarily with higher twitch force. PMID:25422504

Mean-Field Scaling of the Superfluid to Mott Insulator Transition in a 2D Optical Superlattice.

Science.gov (United States)

Thomas, Claire K; Barter, Thomas H; Leung, Tsz-Him; Okano, Masayuki; Jo, Gyu-Boong; Guzman, Jennie; Kimchi, Itamar; Vishwanath, Ashvin; Stamper-Kurn, Dan M

2017-09-08

The mean-field treatment of the Bose-Hubbard model predicts properties of lattice-trapped gases to be insensitive to the specific lattice geometry once system energies are scaled by the lattice coordination number z. We test this scaling directly by comparing coherence properties of ^{87}Rb gases that are driven across the superfluid to Mott insulator transition within optical lattices of either the kagome (z=4) or the triangular (z=6) geometries. The coherent fraction measured for atoms in the kagome lattice is lower than for those in a triangular lattice with the same interaction and tunneling energies. A comparison of measurements from both lattices agrees quantitatively with the scaling prediction. We also study the response of the gas to a change in lattice geometry, and observe the dynamics as a strongly interacting kagome-lattice gas is suddenly "hole doped" by introducing the additional sites of the triangular lattice.

Devil's staircase

International Nuclear Information System (INIS)

Bak, P.

1986-01-01

When the interaction between an oscillator and its driver is strong enough, the oscillator will resonate at, or ''lock'' onto, an infinity of driving frequencies, giving rise to steps with a fractal dimension between 0 and 1

Quaternary landscape evolution of the Helmand Basin, Afghanistan: Insights from staircase terraces, deltas, and paleoshorelines using high-resolution remote sensing analysis

Science.gov (United States)

Evenstar, L. A.; Sparks, R. S. J.; Cooper, F. J.; Lawton, M. N.

2018-06-01

The Helmand Basin in southern Afghanistan is a large (310,000 km2), structurally controlled, endorheically drained basin with a hyperarid climate. The basin hosts a high elevation ( 200 m) plateau (the Dasht-i Margo), 11 fluvial staircase terraces (T11 to T1), 7 delta systems (D1 to D7), and 6 paleolake shorelines (SL1 to SL6) within the Sistan Depression on the western side of the basin. Mapping and surveying of these features by remote sensing is integrated with geological observations to reconstruct Quaternary landscape evolution of the basin. The fluvial systems, deltas, and paleolake shorelines are correlated with one another and with the younger terraces (T7 to T1). The shape of fluvial longitudinal profiles changes depending on whether they formed pre-, syn-, or post-growth of the Koh-i Khannesin volcano on the southern margin of the Helmand River. The age of the volcano ( 0.6 Ma) and correlation of the terraces with the global history of glacial-interglacial cycles constrain the age of the younger terraces to the late Pleistocene and indicates that the older terraces are middle Pleistocene (dating back to 800 ka). The Helmand Basin once hosted a large lake, called here the Sistan paleolake, which at SL6 times and before had a surface area >50,000 km2. Since that time the lake elevation and area have decreased, evolving to the present-day dried out Sistan Depression with small ephemeral playa lakes. Episodic formation of terraces, deltas, and paleolake shorelines is attributed to changes in base level modulated by climate change related to Milankovitch cycles.

Robust flat bands in RCo5 (R=rare earth) compounds

OpenAIRE

Ochi, Masayuki; Arita, Ryotaro; Matsumoto, Munehisa; Kino, Hiori; Miyake, Takashi

2014-01-01

The mechanism to realize the peculiar flat bands generally existing in RCo5 (R=rare earth) compounds is clarified by analyzing the first-principles band structures and the tight-binding model. These flat bands are constructed from the localized eigenstates, the existence of which is guaranteed by the partial cancelation between the intersite hopping amplitudes among the Co-3d states at the Kagome sites and those between the Kagome and honeycomb sites. Their relative positions to other bands c...

Possibility of a two-dimensional spin liquid in CePdAl induced by partial geometric frustration?

Energy Technology Data Exchange (ETDEWEB)

Fritsch, V. [Universitaet Augsburg, Institut fuer Physik, Experimentalphysik VI (Germany); Karlsruher Institut fuer Technologie (Germany); Grube, K.; Kittler, W.; Taubenheim, C.; Loehneysen, H. von [Karlsruher Institut fuer Technologie (Germany); Huesges, Z.; Lucas, S.; Stockert, O. [Max-Planck-Institut fuer chemische Physik fester Stoffe, Dresden (Germany); Green, E. [Hochfeldzentrum Dresden-Rossendorf (Germany)

2015-07-01

CePdAl crystallizes in the hexagonal ZrNiAl structure, where the magnetic ions form a distorted kagome lattice. At T{sub N} = 2.7 K the onset of antiferromagnetic (AF) order is observed. Neutron scattering experiments revealed a partial frustration in the distorted kagome planes of this structure: two-thirds of the Ce moments form ferromagnetic chains, which are antiferromagnetically coupled, the remaining third do not participate in any long-range order. Along the c-axis the magnetic moments exhibit an amplitude modulation. Accordingly, the kagome planes are stacked on top of each other, resulting in corrugated AF planes parallel to the c-axis formed by the ordered magnetic moments, which are separated by the frustrated moments. It is an intriguing and yet unresolved question if this third of frustrated moments forms a spin liquid state in CePdAl. Based on measurements of specific heat, thermal expansion, magnetization and electrical resistivity we want to discuss this possibility.

Magnetic structure of the swedenborgite CaBa (Co3Fe ) O7 derived by unpolarized neutron diffraction and spherical neutron polarimetry

Science.gov (United States)

Qureshi, N.; Díaz, M. T. Fernández; Chapon, L. C.; Senyshyn, A.; Schweika, W.; Valldor, M.

2018-02-01

We present a study that combines polarized and unpolarized neutrons to derive the magnetic structure of the swedenborgite compound CaBa (Co3Fe ) O7. Integrated intensities from a standard neutron diffraction experiment and polarization matrices from spherical neutron polarimetry have been simultaneously analyzed revealing a complex order, which differs from the usual spin configurations on a kagome lattice. We find that the magnetic structure is well described by a combination of two one-dimensional representations corresponding to the magnetic superspace symmetry P 21' , and it consists of spins rotating around an axis close to the [110] direction. Due to the propagation vector q =(1/3 00 ) , this modulation has cycloidal and helicoidal character rendering this system a potential multiferroic. The resulting spin configuration can be mapped onto the classical √{3 }×√{3 } structure of a kagome lattice, and it indicates an important interplay between the kagome and the triangular layers of the crystal structure.

Mixing ratio sensor of alcohol mixed fuel

Energy Technology Data Exchange (ETDEWEB)

Miyata, Shigeru; Matsubara, Yoshihiro

1987-08-07

In order to improve combustion efficiency of an internal combustion engine using gasoline-alcohol mixed fuel and to reduce harmful substance in its exhaust gas, it is necessary to control strictly the air-fuel ratio to be supplied and the ignition timing and change the condition of control depending upon the mixing ratio of the mixed fuel. In order to detect the mixing ratio of the mixed fuel, the above mixing ratio has so far been detected by casting a ray of light to the mixed fuel and utilizing a change of critical angle associated with the change of the composition of the fluid of the mixed fuel. However, in case when a light emitting diode is used for the light source above, two kinds of sensors are further needed. Concerning the two kinds of sensors above, this invention offers a mixing ratio sensor for the alcohol mixed fuel which can abolish a temperature sensor to detect the environmental temperature by making a single compensatory light receiving element deal with the compensation of the amount of light emission of the light emitting element due to the temperature change and the compensation of the critical angle caused by the temperature change. (6 figs)

Mixing ratio sensor for alcohol mixed fuel

Energy Technology Data Exchange (ETDEWEB)

Miyata, Shigeru; Matsubara, Yoshihiro

1987-08-24

In order to improve the combustion efficiency of an internal combustion engine using gasoline-alcohol mixed fuel and to reduce harmful substance in its exhaust gas, it is necessary to control strictly the air-fuel ratio to be supplied and the ignition timing. In order to detect the mixing ratio of the mixed fuel, a mixing ratio sensor has so far been proposed to detect the above mixing ratio by casting a ray of light to the mixed fuel and utilizing a change of critical angle associated with the change of the composition of the fluid of the mixed fuel. However, because of the arrangement of its transparent substance in the fuel passage with the sealing material in between, this sensor invited the leakage of the fluid due to deterioration of the sealing material, etc. and its cost became high because of too many parts to be assembled. In view of the above, in order to reduce the number of parts, to lower the cost of parts and the assembling cost and to secure no fluid leakage from the fuel passage, this invention formed the above fuel passage and the above transparent substance both concerning the above mixing ratio sensor in an integrated manner using light transmitting resin. (3 figs)

Magnon Spin-Momentum Locking: Various Spin Vortices and Dirac magnons in Noncollinear Antiferromagnets

Science.gov (United States)

Okuma, Nobuyuki

2017-09-01

We generalize the concept of the spin-momentum locking to magnonic systems and derive the formula to calculate the spin expectation value for one-magnon states of general two-body spin Hamiltonians. We give no-go conditions for magnon spin to be independent of momentum. As examples of the magnon spin-momentum locking, we analyze a one-dimensional antiferromagnet with the Néel order and two-dimensional kagome lattice antiferromagnets with the 120° structure. We find that the magnon spin depends on its momentum even when the Hamiltonian has the z -axis spin rotational symmetry, which can be explained in the context of a singular band point or a U (1 ) symmetry breaking. A spin vortex in momentum space generated in a kagome lattice antiferromagnet has the winding number Q =-2 , while the typical one observed in topological insulator surface states is characterized by Q =+1 . A magnonic analogue of the surface states, the Dirac magnon with Q =+1 , is found in another kagome lattice antiferromagnet. We also derive the sum rule for Q by using the Poincaré-Hopf index theorem.

Magnon Spin-Momentum Locking: Various Spin Vortices and Dirac magnons in Noncollinear Antiferromagnets.

Science.gov (United States)

Okuma, Nobuyuki

2017-09-08

We generalize the concept of the spin-momentum locking to magnonic systems and derive the formula to calculate the spin expectation value for one-magnon states of general two-body spin Hamiltonians. We give no-go conditions for magnon spin to be independent of momentum. As examples of the magnon spin-momentum locking, we analyze a one-dimensional antiferromagnet with the Néel order and two-dimensional kagome lattice antiferromagnets with the 120° structure. We find that the magnon spin depends on its momentum even when the Hamiltonian has the z-axis spin rotational symmetry, which can be explained in the context of a singular band point or a U(1) symmetry breaking. A spin vortex in momentum space generated in a kagome lattice antiferromagnet has the winding number Q=-2, while the typical one observed in topological insulator surface states is characterized by Q=+1. A magnonic analogue of the surface states, the Dirac magnon with Q=+1, is found in another kagome lattice antiferromagnet. We also derive the sum rule for Q by using the Poincaré-Hopf index theorem.

Extrusion-mixing compared with hand-mixing of polyether impression materials?

Science.gov (United States)

McMahon, Caroline; Kinsella, Daniel; Fleming, Garry J P

2010-12-01

The hypotheses tested were two-fold (a) whether altering the base:catalyst ratio influences working time, elastic recovery and strain in compression properties of a hand-mixed polyether impression material and (b) whether an extrusion-mixed polyether impression material would have a significant advantage over a hand-mixed polyether impression material mixed to the optimum base:catalyst ratio. The polyether was hand-mixed at the optimum (manufacturers recommended) base:catalyst ratios (7:1) and further groups were made by increasing or decreasing the catalyst length by 25%. Additionally specimens were also made from an extrusion-mixed polyether impression material and compared with the optimum hand-mixed base:catalyst ratio. A penetrometer assembly was used to measure the working time (n=5). Five cylindrical specimens for each hand-mixed and extrusion mixed group investigated were employed for elastic recovery and strain in compression testing. Hand-mixing polyether impression materials with 25% more catalyst than that recommended significantly decreased the working time while hand-mixing with 25% less catalyst than that recommended significantly increased the strain in compression. The extrusion-mixed polyether impression material provided similar working time, elastic recovery and strain in compression to the hand-mixed polyether mixed at the optimum base:catalyst ratio.

Vortex ice in nanostructured superconductors

Energy Technology Data Exchange (ETDEWEB)

Reichhardt, Charles [Los Alamos National Laboratory; Reichhardt, Cynthia J [Los Alamos National Laboratory; Libal, Andras J [Los Alamos National Laboratory

2008-01-01

We demonstrate using numerical simulations of nanostructured superconductors that it is possible to realize vortex ice states that are analogous to square and kagome ice. The system can be brought into a state that obeys either global or local ice rules by applying an external current according to an annealing protocol. We explore the breakdown of the ice rules due to disorder in the nanostructure array and show that in square ice, topological defects appear along grain boundaries, while in kagome ice, individual defects appear. We argue that the vortex system offers significant advantages over other artificial ice systems.

Periodic Ground State Configurations in a One-Dimensional Hubbard Model of Statistical Mechanics

International Nuclear Information System (INIS)

Kipnis, M. M.

2000-01-01

This paper considers an averaging procedure for the description of a particles arrangement in a Hubbard model with antiferromagnetic interactions. The arrangements are described by the devil's staircase. Completeness of the staircase is proved

Bimaximal fermion mixing from the quark and leptonic mixing matrices

International Nuclear Information System (INIS)

Ohlsson, Tommy

2005-01-01

In this Letter, we show how the mixing angles of the standard parameterization add when multiplying the quark and leptonic mixing matrices, i.e., we derive explicit sum rules for the quark and leptonic mixing angles. In this connection, we also discuss other recently proposed sum rules for the mixing angles assuming bimaximal fermion mixing. In addition, we find that the present experimental and phenomenological data of the mixing angles naturally fulfill our sum rules, and thus, give rise to bilarge or bimaximal fermion mixing

European mixed forests

DEFF Research Database (Denmark)

Bravo-Oviedo, Andres; Pretzsch, Hans; Ammer, Christian

2014-01-01

Aim of study: We aim at (i) developing a reference definition of mixed forests in order to harmonize comparative research in mixed forests and (ii) review the research perspectives in mixed forests. Area of study: The definition is developed in Europe but can be tested worldwide. Material...... and Methods: Review of existent definitions of mixed forests based and literature review encompassing dynamics, management and economic valuation of mixed forests. Main results: A mixed forest is defined as a forest unit, excluding linear formations, where at least two tree species coexist at any...... density in mixed forests, (iii) conversion of monocultures to mixed-species forest and (iv) economic valuation of ecosystem services provided by mixed forests. Research highlights: The definition is considered a high-level one which encompasses previous attempts to define mixed forests. Current fields...

Electron spin resonance insight into broadband absorption of the Cu3Bi(SeO32O2Br metamagnet

Directory of Open Access Journals (Sweden)

A. Zorko

2016-05-01

Full Text Available Metamagnets, which exhibit a transition from a low-magnetization to a high-magnetization state induced by the applied magnetic field, have recently been highlighted as promising materials for controllable broadband absorption. Here we show results of a multifrequency electron spin resonance (ESR investigation of the Cu3Bi(SeO32O2Br planar metamagnet on the kagome lattice. Its mixed antiferromagnetic/ferromagnetic phase is stabilized in a finite range of applied fields around 0.8 T at low temperatures and is characterized by enhanced microwave absorption. The absorption signal is non-resonant and its boundaries correspond to two critical fields that determine the mixed phase. With decreasing temperature these increase like the sublattice magnetization of the antiferromagnetic phase and show no frequency dependence between 100 and 480 GHz. On the contrary, we find that the critical fields depend on the magnetic-field sweeping direction. In particular, the higher critical field, which corresponds to the transition from the mixed to the ferromagnetic phase, shows a pronounced hysteresis effect, while such a hysteresis is absent for the lower critical field. The observed hysteresis is enhanced at lower temperatures, which suggests that thermal fluctuations play an important role in destabilizing the highly absorbing mixed phase.

Electron spin resonance insight into broadband absorption of the Cu3Bi(SeO3)2O2Br metamagnet

Science.gov (United States)

Zorko, A.; Gomilšek, M.; Pregelj, M.; Ozerov, M.; Zvyagin, S. A.; Ozarowski, A.; Tsurkan, V.; Loidl, A.; Zaharko, O.

2016-05-01

Metamagnets, which exhibit a transition from a low-magnetization to a high-magnetization state induced by the applied magnetic field, have recently been highlighted as promising materials for controllable broadband absorption. Here we show results of a multifrequency electron spin resonance (ESR) investigation of the Cu3Bi(SeO3)2O2Br planar metamagnet on the kagome lattice. Its mixed antiferromagnetic/ferromagnetic phase is stabilized in a finite range of applied fields around 0.8 T at low temperatures and is characterized by enhanced microwave absorption. The absorption signal is non-resonant and its boundaries correspond to two critical fields that determine the mixed phase. With decreasing temperature these increase like the sublattice magnetization of the antiferromagnetic phase and show no frequency dependence between 100 and 480 GHz. On the contrary, we find that the critical fields depend on the magnetic-field sweeping direction. In particular, the higher critical field, which corresponds to the transition from the mixed to the ferromagnetic phase, shows a pronounced hysteresis effect, while such a hysteresis is absent for the lower critical field. The observed hysteresis is enhanced at lower temperatures, which suggests that thermal fluctuations play an important role in destabilizing the highly absorbing mixed phase.

Mixing it but not mixed-up: mixed methods research in medical education (a critical narrative review).

Science.gov (United States)

Maudsley, Gillian

2011-01-01

Some important research questions in medical education and health services research need 'mixed methods research' (particularly synthesizing quantitative and qualitative findings). The approach is not new, but should be more explicitly reported. The broad search question here, of a disjointed literature, was thus: What is mixed methods research - how should it relate to medical education research?, focused on explicit acknowledgement of 'mixing'. Literature searching focused on Web of Knowledge supplemented by other databases across disciplines. Five main messages emerged: - Thinking quantitative and qualitative, not quantitative versus qualitative - Appreciating that mixed methods research blends different knowledge claims, enquiry strategies, and methods - Using a 'horses for courses' [whatever works] approach to the question, and clarifying the mix - Appreciating how medical education research competes with the 'evidence-based' movement, health services research, and the 'RCT' - Being more explicit about the role of mixed methods in medical education research, and the required expertise Mixed methods research is valuable, yet the literature relevant to medical education is fragmented and poorly indexed. The required time, effort, expertise, and techniques deserve better recognition. More write-ups should explicitly discuss the 'mixing' (particularly of findings), rather than report separate components.

NUMERICALLY DETERMINED TRANSPORT LAWS FOR FINGERING ('THERMOHALINE') CONVECTION IN ASTROPHYSICS

International Nuclear Information System (INIS)

Traxler, A.; Garaud, P.; Stellmach, S.

2011-01-01

We present the first three-dimensional simulations of fingering convection performed at parameter values approaching those relevant for astrophysics. Our simulations reveal the existence of simple asymptotic scaling laws for turbulent heat and compositional transport, which can be straightforwardly extrapolated from our numerically tractable values to the true astrophysical regime. Our investigation also indicates that thermo-compositional 'staircases', a key consequence of fingering convection in the ocean, cannot form spontaneously in the fingering regime in stellar interiors. Our proposed empirically determined transport laws thus provide simple prescriptions for mixing by fingering convection in a variety of astrophysical situations, and should, from here on, be used preferentially over older and less accurate parameterizations. They also establish that fingering convection does not provide sufficient extra-mixing to explain observed chemical abundances in red giant branch stars.

Effect of Mixing Process on Polypropylene Modified Bituminous Concrete Mix Properties

OpenAIRE

Noor Zainab Habib; Ibrahim Kamaruddin; Madzalan Napiah; Isa Mohd Tan

2011-01-01

This paper presents a research conducted to investigate the effect of mixing process on polypropylene (PP) modified bitumen mixed with well graded aggregate to form modified bituminous concrete mix. Two mode of mixing, namely dry and wet with different concentration of polymer polypropylene was used with 80/100 pen bitumen, to evaluate the bituminous concrete mix properties. Three percentages of polymer varying from 1-3% by the weight of bitumen was used in this study. Three mixes namely cont...

Mixed-mode modelling mixing methodologies for organisational intervention

CERN Document Server

Clarke, Steve; Lehaney, Brian

2001-01-01

The 1980s and 1990s have seen a growing interest in research and practice in the use of methodologies within problem contexts characterised by a primary focus on technology, human issues, or power. During the last five to ten years, this has given rise to challenges regarding the ability of a single methodology to address all such contexts, and the consequent development of approaches which aim to mix methodologies within a single problem situation. This has been particularly so where the situation has called for a mix of technological (the so-called 'hard') and human­ centred (so-called 'soft') methods. The approach developed has been termed mixed-mode modelling. The area of mixed-mode modelling is relatively new, with the phrase being coined approximately four years ago by Brian Lehaney in a keynote paper published at the 1996 Annual Conference of the UK Operational Research Society. Mixed-mode modelling, as suggested above, is a new way of considering problem situations faced by organisations. Traditional...

Pramana – Journal of Physics | Indian Academy of Sciences

Indian Academy of Sciences (India)

... functions like the Cantor staircase. The functions like the Cantor staircase function occur naturally as solutions of -differential equations. Hence the latter can be used to model fractal-time processes or sublinear dynamical systems. We discuss construction and solutions of some fractal differential equations of the form.

Particle–Mixing Simulations Using DEM and Comparison of the Performance of Mixing Indices

International Nuclear Information System (INIS)

Cho, Migyung

2017-01-01

Mixing of molecular grains having different characteristics is very important in many industries such as the food and pharmaceutical industries. With the development of computer simulations, it is common practice to find the optimal mixing conditions through a simulation before the actual mixing task to estimate the proper level of mixing. Accordingly, there has been an increasing need for a mixing index to measure the mix of particles in the simulation process. Mixing indices, which have been widely used so far, can largely be classified into two types: first is the statistical-based mixing index, which is prepared using the sampling method, and the second is the mixing index that is prepared using all the particles. In this paper, we calculated mixing indices in different ways for the data in the course of mixing the particles using the DEM simulation. Additionally, we compared the performance, advantages, and disadvantages of each mixing index. Therefore, I propose a standard that can be used to select an appropriate mixing index.

Particle–Mixing Simulations Using DEM and Comparison of the Performance of Mixing Indices

Energy Technology Data Exchange (ETDEWEB)

Cho, Migyung [Tongmyong Univ., Busan (Korea, Republic of)

2017-02-15

Mixing of molecular grains having different characteristics is very important in many industries such as the food and pharmaceutical industries. With the development of computer simulations, it is common practice to find the optimal mixing conditions through a simulation before the actual mixing task to estimate the proper level of mixing. Accordingly, there has been an increasing need for a mixing index to measure the mix of particles in the simulation process. Mixing indices, which have been widely used so far, can largely be classified into two types: first is the statistical-based mixing index, which is prepared using the sampling method, and the second is the mixing index that is prepared using all the particles. In this paper, we calculated mixing indices in different ways for the data in the course of mixing the particles using the DEM simulation. Additionally, we compared the performance, advantages, and disadvantages of each mixing index. Therefore, I propose a standard that can be used to select an appropriate mixing index.

Post-tectonic landscape evolution in NE Iberia using staircase terraces: Combined effects of uplift and climate

Science.gov (United States)

Lewis, Claudia J.; Sancho, Carlos; McDonald, Eric V.; Peña-Monné, José Luis; Pueyo, Emilio L.; Rhodes, Edward; Calle, Mikel; Soto, Ruth

2017-09-01

River incision into bedrock resulting from the combined effects of tectonic uplift and climate governs long-term regional landscape evolution. We determined spatial and temporal patterns of post-orogenic stream incision from a sequence of well-preserved staircase terraces developed over the last 1 Ma in the Central Pyrenees and its southern foreland Ebro basin (NE Spain). Extensive remnants of ten vertically separated terraces (Qt1 to Qt10, from oldest to youngest) were mapped along 170 km of the Cinca River valley, transverse to the Pyrenean mountain belt. Multiple outcrops appear in the upper reach of the valley (Ainsa sector, 50 km from headwaters) as well as in the lower reach (Albalate sector, 125 km from headwaters). Fluvial incision into bedrock was calculated using (i) differentially corrected GPS measurements of the altitude of straths and (ii) numerical dating of alluvial sediments from the lower terraces (Qt5 to Qt9) by Optically Stimulated Luminescence, previously reported by Lewis et al. (2009), and supplemented with new dates for the upper terraces (Qt1, Qt2 and Qt3) based on paleomagnetism and supported by soil development. Considering altitude differences and the elapsed time between successive well preserved terrace couples (Qt3-Qt7, Qt7-Qt9 and Qt9-Active channel), mean bedrock incision rates ranged from 0.76 to 0.38 m ka- 1, at the upper reach of the valley (Ainsa section), and from 0.61 to 0.20 m ka- 1, at the lower reach (Albalate section). River incision along the valley produced vertically separated, near-parallel longitudinal terrace profiles evidencing a rapid near-uniform regional uplift as response to (i) the tectonic lithospheric thickening in NE Iberia and (ii) the erosional download rebound related to the Ebro basin exorheism. Moreover, a subtle upstream divergence of strath profiles may have been a consequence of an increase in uplift rate toward the head of the valley. Additionally, incision rates changed over time as indicate

ADVANCED MIXING MODELS

International Nuclear Information System (INIS)

Lee, S; Richard Dimenna, R; David Tamburello, D

2008-01-01

The process of recovering the waste in storage tanks at the Savannah River Site (SRS) typically requires mixing the contents of the tank with one to four dual-nozzle jet mixers located within the tank. The typical criteria to establish a mixed condition in a tank are based on the number of pumps in operation and the time duration of operation. To ensure that a mixed condition is achieved, operating times are set conservatively long. This approach results in high operational costs because of the long mixing times and high maintenance and repair costs for the same reason. A significant reduction in both of these costs might be realized by reducing the required mixing time based on calculating a reliable indicator of mixing with a suitably validated computer code. The work described in this report establishes the basis for further development of the theory leading to the identified mixing indicators, the benchmark analyses demonstrating their consistency with widely accepted correlations, and the application of those indicators to SRS waste tanks to provide a better, physically based estimate of the required mixing time. Waste storage tanks at SRS contain settled sludge which varies in height from zero to 10 ft. The sludge has been characterized and modeled as micron-sized solids, typically 1 to 5 microns, at weight fractions as high as 20 to 30 wt%, specific gravities to 1.4, and viscosities up to 64 cp during motion. The sludge is suspended and mixed through the use of submersible slurry jet pumps. To suspend settled sludge, water is added to the tank as a slurry medium and stirred with the jet pump. Although there is considerable technical literature on mixing and solid suspension in agitated tanks, very little literature has been published on jet mixing in a large-scale tank. If shorter mixing times can be shown to support Defense Waste Processing Facility (DWPF) or other feed requirements, longer pump lifetimes can be achieved with associated operational cost and

ADVANCED MIXING MODELS

Energy Technology Data Exchange (ETDEWEB)

Lee, S; Richard Dimenna, R; David Tamburello, D

2008-11-13

The process of recovering the waste in storage tanks at the Savannah River Site (SRS) typically requires mixing the contents of the tank with one to four dual-nozzle jet mixers located within the tank. The typical criteria to establish a mixed condition in a tank are based on the number of pumps in operation and the time duration of operation. To ensure that a mixed condition is achieved, operating times are set conservatively long. This approach results in high operational costs because of the long mixing times and high maintenance and repair costs for the same reason. A significant reduction in both of these costs might be realized by reducing the required mixing time based on calculating a reliable indicator of mixing with a suitably validated computer code. The work described in this report establishes the basis for further development of the theory leading to the identified mixing indicators, the benchmark analyses demonstrating their consistency with widely accepted correlations, and the application of those indicators to SRS waste tanks to provide a better, physically based estimate of the required mixing time. Waste storage tanks at SRS contain settled sludge which varies in height from zero to 10 ft. The sludge has been characterized and modeled as micron-sized solids, typically 1 to 5 microns, at weight fractions as high as 20 to 30 wt%, specific gravities to 1.4, and viscosities up to 64 cp during motion. The sludge is suspended and mixed through the use of submersible slurry jet pumps. To suspend settled sludge, water is added to the tank as a slurry medium and stirred with the jet pump. Although there is considerable technical literature on mixing and solid suspension in agitated tanks, very little literature has been published on jet mixing in a large-scale tank. If shorter mixing times can be shown to support Defense Waste Processing Facility (DWPF) or other feed requirements, longer pump lifetimes can be achieved with associated operational cost and

Navigation Meshes for Realistic Multi-Layered Environments.

NARCIS (Netherlands)

van Toll, W.G.|info:eu-repo/dai/nl/35269288X; Cook IV, A.F.; Geraerts, R.J.|info:eu-repo/dai/nl/304830291

2011-01-01

Virtual characters often need to plan visually convincing paths through a complicated environment. For example, a traveler may need to walk from an airport entrance to a staircase, descend the staircase, walk to a shuttle, ride the shuttle to a destination, ride an elevator back to the ground floor,

Multi-Layered Navigation Meshes

NARCIS (Netherlands)

van Toll, W.G.; Cook IV, A.F.; Geraerts, R.J.

2011-01-01

Virtual characters often need to plan visually convincing paths through a complicated environment. For example, a traveler may need to walk from an airport entrance to a staircase, descend the staircase, walk to a shuttle, ride the shuttle to a destination, ride an elevator back to the ground floor,

Fluid mixing III

International Nuclear Information System (INIS)

Harnby, N.

1988-01-01

Covering all aspects of mixing, this work presents research and developments in industrial applications, flow patterns and mixture analysis, mixing of solids into liquids, and mixing of gases into liquids

Sylgard® Mixing Study

Energy Technology Data Exchange (ETDEWEB)

Bello, Mollie [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Welch, Cynthia F. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Goodwin, Lynne Alese [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Keller, Jennie [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2014-08-22

Sylgard® 184 and Sylgard® 186 silicone elastomers form Dow Corning® are used as potting agents across the Nuclear Weapons Complex. A standardized mixing procedure is required for filled versions of these products. The present study is a follow-up to a mixing study performed by MST-7 which established the best mixing procedure to use when adding filler to either 184 or 186 base resins. The most effective and consistent method of mixing resin and curing agent for three modified silicone elastomer recipes is outlined in this report. For each recipe, sample size, mixing type, and mixing time was varied over 10 separate runs. The results show that the THINKY™ Mixer gives reliable mixing over varying batch sizes and mixing times. Hand Mixing can give improved mixing, as indicated by reduced initial viscosity; however, this method is not consistent.

The use of "mixing" procedure of mixed methods in health services research.

Science.gov (United States)

Zhang, Wanqing; Creswell, John

2013-08-01

Mixed methods research has emerged alongside qualitative and quantitative approaches as an important tool for health services researchers. Despite growing interest, among health services researchers, in using mixed methods designs, little has been done to identify the procedural aspects of doing so. To describe how mixed methods researchers mix the qualitative and quantitative aspects of their studies in health services research. We searched the PubMed for articles, using mixed methods in health services research, published between January 1, 2006 and December 30, 2010. We identified and reviewed 30 published health services research articles on studies in which mixed methods had been used. We selected 3 articles as illustrations to help health services researcher conceptualize the type of mixing procedures that they were using. Three main "mixing" procedures have been applied within these studies: (1) the researchers analyzed the 2 types of data at the same time but separately and integrated the results during interpretation; (2) the researchers connected the qualitative and quantitative portions in phases in such a way that 1 approach was built upon the findings of the other approach; and (3) the researchers mixed the 2 data types by embedding the analysis of 1 data type within the other. "Mixing" in mixed methods is more than just the combination of 2 independent components of the quantitative and qualitative data. The use of "mixing" procedure in health services research involves the integration, connection, and embedding of these 2 data components.

Investigation of the High-Cycle Fatigue Life of Selective Laser Melted and Hot Isostatically Pressed Ti-6Al-4v

Science.gov (United States)

2015-03-26

marketed for production of parts with metal alloys: electron-beam melting and laser sintering (LS) [3, 10, 36]. The primary distinction between EBM and LS...staircase method described in ASTM STP 588 [68]. The first specimen in a staircase test is tested at a maximum stress level corresponding to the

Effects of environmental changes in a stair climbing intervention: generalization to stair descent.

Science.gov (United States)

Webb, Oliver J; Eves, Frank F

2007-01-01

Visual improvements have been shown to encourage stair use in worksites independently of written prompts. This study examined whether visual modifications alone can influence behavior in a shopping mall. Climbing one flight of stairs, however, will not confer health benefits. Therefore, this study also assessed whether exposure to the intervention encouraged subsequent stair use. Interrupted time-series design. Escalators flanked by a staircase on either side. Ascending and descending pedestrians (N = 81,948). Following baseline monitoring, a colorful design was introduced on the stair risers of one staircase (the target staircase). A health promotion message was superimposed later on top. The intervention was visible only to ascending pedestrians. Thus, any rise in descending stair use would indicate increased intention to use stairs, which endured after initial exposure to the intervention. Observers inconspicuously coded pedestrians' means of ascent/descent and demographic characteristics. The design alone had no meaningful impact. Addition of the message, however, increased stair climbing at the target and nontarget staircases by 190% and 52%, respectively. The message also produced a modest increase in stair descent at the target (25%) and nontarget (9%) staircases. In public venues, a message component is critical to the success of interventions. In addition, it appears that exposure to an intervention can encourage pedestrians to use stairs on a subsequent occasion.

The Value of Mixed Methods Research: A Mixed Methods Study

Science.gov (United States)

McKim, Courtney A.

2017-01-01

The purpose of this explanatory mixed methods study was to examine the perceived value of mixed methods research for graduate students. The quantitative phase was an experiment examining the effect of a passage's methodology on students' perceived value. Results indicated students scored the mixed methods passage as more valuable than those who…

ADVANCED MIXING MODELS

Energy Technology Data Exchange (ETDEWEB)

Lee, S; Dimenna, R; Tamburello, D

2011-02-14

The process of recovering and processing High Level Waste (HLW) the waste in storage tanks at the Savannah River Site (SRS) typically requires mixing the contents of the tank with one to four mixers (pumps) located within the tank. The typical criteria to establish a mixed condition in a tank are based on the number of pumps in operation and the time duration of operation. To ensure that a mixed condition is achieved, operating times are typically set conservatively long. This approach results in high operational costs because of the long mixing times and high maintenance and repair costs for the same reason. A significant reduction in both of these costs might be realized by reducing the required mixing time based on calculating a reliable indicator of mixing with a suitably validated computer code. The focus of the present work is to establish mixing criteria applicable to miscible fluids, with an ultimate goal of addressing waste processing in HLW tanks at SRS and quantifying the mixing time required to suspend sludge particles with the submersible jet pump. A single-phase computational fluid dynamics (CFD) approach was taken for the analysis of jet flow patterns with an emphasis on the velocity decay and the turbulent flow evolution for the farfield region from the pump. Literature results for a turbulent jet flow are reviewed, since the decay of the axial jet velocity and the evolution of the jet flow patterns are important phenomena affecting sludge suspension and mixing operations. The work described in this report suggests a basis for further development of the theory leading to the identified mixing indicators, with benchmark analyses demonstrating their consistency with widely accepted correlations. Although the indicators are somewhat generic in nature, they are applied to Savannah River Site (SRS) waste tanks to provide a better, physically based estimate of the required mixing time. Waste storage tanks at SRS contain settled sludge which varies in

Mixing Ventilation. Guide on mixing air distribution design

DEFF Research Database (Denmark)

Kandzia, Claudia; Kosonen, Risto; Melikov, Arsen Krikor

In this guidebook most of the known and used in practice methods for achieving mixing air distribution are discussed. Mixing ventilation has been applied to many different spaces providing fresh air and thermal comfort to the occupants. Today, a design engineer can choose from large selection...

Structural and magnetic properties of two branches of the tripod-kagome-lattice family A2R3Sb3O14 (A = Mg, Zn; R = Pr, Nd, Gd, Tb, Dy, Ho, Er, Yb)

Science.gov (United States)

Dun, Z. L.; Trinh, J.; Lee, M.; Choi, E. S.; Li, K.; Hu, Y. F.; Wang, Y. X.; Blanc, N.; Ramirez, A. P.; Zhou, H. D.

2017-03-01

We present a systematic study of the structural and magnetic properties of two branches of the rare-earth tripod-kagome-lattice (TKL) family A2R3Sb3O14 (A = Mg, Zn; R = Pr, Nd, Gd, Tb, Dy, Ho, Er, Yb; here, we use abbreviation A-R, as in MgPr for Mg2Pr3Sb3O14 ), which complements our previously reported work on MgDy, MgGd, and MgEr [Z. L. Dun et al., Phys. Rev. Lett. 116, 157201 (2016), 10.1103/PhysRevLett.116.157201]. The present susceptibility (χdc, χac) and specific-heat measurements reveal various magnetic ground states, including the nonmagnetic singlet state for MgPr, ZnPr; long-range orderings (LROs) for MgGd, ZnGd, MgNd, ZnNd, and MgYb; a long-range magnetic charge ordered state for MgDy, ZnDy, and potentially for MgHo; possible spin-glass states for ZnEr, ZnHo; the absence of spin ordering down to 80 mK for MgEr, MgTb, ZnTb, and ZnYb compounds. The ground states observed here bear both similarities as well as striking differences from the states found in the parent pyrochlore systems. In particular, while the TKLs display a greater tendency towards LRO, the lack of LRO in MgHo, MgTb, and ZnTb can be viewed from the standpoint of a balance among spin-spin interactions, anisotropies, and non-Kramers nature of single-ion state. While substituting Zn for Mg changes the chemical pressure, and subtly modifies the interaction energies for compounds with larger R ions, this substitution introduces structural disorder and modifies the ground states for compounds with smaller R ions (Ho, Er, Yb).

Sneutrino mixing

International Nuclear Information System (INIS)

Grossman, Y.

1997-10-01

In supersymmetric models with nonvanishing Majorana neutrino masses, the sneutrino and antisneutrino mix. The conditions under which this mixing is experimentally observable are studied, and mass-splitting of the sneutrino mass eigenstates and sneutrino oscillation phenomena are analyzed

Mixing ventilation guide on mixing air distribution design

CERN Document Server

Kandzia, Claudia; Kosonen, Risto; Krikor Melikov, Arsen; Nielsen, Peter Vilhelm

2013-01-01

In this guidebook most of the known and used in practice methods for achieving mixing air distribution are discussed. Mixing ventilation has been applied to many different spaces providing fresh air and thermal comfort to the occupants. Today, a design engineer can choose from large selection of air diffusers and exhaust openings.

Continuous mixing of solids

NARCIS (Netherlands)

Raouf, M.S.

1963-01-01

The most important literature on theoretical aspects of mixing solids was reviewed.

Only when the mixed materials showed no segregation it was possible to analyse the mixing process quantitatively. In this case the mixture could be described by the 'χ' Square test. Longitudinal mixing could be

Contemplating case mix: A primer on case mix classification and management.

Science.gov (United States)

Costa, Andrew P; Poss, Jeffery W; McKillop, Ian

2015-01-01

Case mix classifications are the frameworks that underlie many healthcare funding schemes, including the so-called activity-based funding. Now more than ever, Canadian healthcare administrators are evaluating case mix-based funding and deciphering how they will influence their organization. Case mix is a topic fraught with technical jargon and largely relegated to government agencies or private industries. This article provides an abridged review of case mix classification as well as its implications for management in healthcare. © 2015 The Canadian College of Health Leaders.

Sample Set (SE): SE41 [Metabolonote[Archive

Lifescience Database Archive (English)

Full Text Available 1, Daisuke Shibata 1, 2, 1:Graduate School of Agriculture, Kyoto University, Japan, 2:Kazusa DNA Research Institute, Japan, 3:KAGOME CO., LTD., Japan Direct Submittion version 1 ...

Mixed Waste Management Facility

International Nuclear Information System (INIS)

Brummond, W.; Celeste, J.; Steenhoven, J.

1993-08-01

The DOE has developed a National Mixed Waste Strategic Plan which calls for the construction of 2 to 9 mixed waste treatment centers in the Complex in the near future. LLNL is working to establish an integrated mixed waste technology development and demonstration system facility, the Mixed Waste Management Facility (MWMF), to support the DOE National Mixed Waste Strategic Plan. The MWMF will develop, demonstrate, test, and evaluate incinerator-alternatives which will comply with regulations governing the treatment and disposal of organic mixed wastes. LLNL will provide the DOE with engineering data for design and operation of new technologies which can be implemented in their mixed waste treatment centers. MWMF will operate under real production plant conditions and process samples of real LLNL mixed waste. In addition to the destruction of organic mixed wastes, the development and demonstration will include waste feed preparation, material transport systems, aqueous treatment, off-gas treatment, and final forms, thus making it an integrated ''cradle to grave'' demonstration. Technologies from offsite as well as LLNL's will be tested and evaluated when they are ready for a pilot scale demonstration, according to the needs of the DOE

Inference of ICF Implosion Core Mix using Experimental Data and Theoretical Mix Modeling

International Nuclear Information System (INIS)

Welser-Sherrill, L.; Haynes, D.A.; Mancini, R.C.; Cooley, J.H.; Tommasini, R.; Golovkin, I.E.; Sherrill, M.E.; Haan, S.W.

2009-01-01

The mixing between fuel and shell materials in Inertial Confinement Fusion (ICF) implosion cores is a current topic of interest. The goal of this work was to design direct-drive ICF experiments which have varying levels of mix, and subsequently to extract information on mixing directly from the experimental data using spectroscopic techniques. The experimental design was accomplished using hydrodynamic simulations in conjunction with Haan's saturation model, which was used to predict the mix levels of candidate experimental configurations. These theoretical predictions were then compared to the mixing information which was extracted from the experimental data, and it was found that Haan's mix model performed well in predicting trends in the width of the mix layer. With these results, we have contributed to an assessment of the range of validity and predictive capability of the Haan saturation model, as well as increased our confidence in the methods used to extract mixing information from experimental data.

Mixing Ventilation

DEFF Research Database (Denmark)

Kandzia, Claudia; Kosonen, Risto; Melikov, Arsen Krikor

In this guidebook most of the known and used in practice methods for achieving mixing air distribution are discussed. Mixing ventilation has been applied to many different spaces providing fresh air and thermal comfort to the occupants. Today, a design engineer can choose from large selection...

Multifunctional Mechatronic Materials

National Research Council Canada - National Science Library

Evans, Anthony

2003-01-01

Contributions have been made in two basic areas: ultralight structures based on sandwich panels with truss and textile cores, and high authority actuating structures based on the properties of the Kagome system...

Staircase To Sustainable Development

Directory of Open Access Journals (Sweden)

Doorasamy Mishelle

2015-06-01

Full Text Available The aim of this article to provide a theoretical framework on the concepts of Sustainable Development and the process that companies need to follow in order to ensure the future sustainability of business operations. Various secondary sources and previous literature was reviewed to clearly identify why companies are finding it difficult to conduct their business operations in a sustainable manner. Stricter legislation and regulations, increased competition, depletion of natural resources and market pressures have placed organisations under increased pressure to improve environmental performance and achieve eco-efficiency. This paper provides comprehensive overview of how companies can achieve the ‘Triple bottom line’ by committing to continuous improvement and adhering to the regulations stipulated according to the International Standards of Organisations (ISO14001.

Staircases, Towers, and Castles

Science.gov (United States)

Kara, Melike; Eames, Cheryl L.; Miller, Amanda L.; Chieu, Annie

2015-01-01

The very nature of algebra concerns the generalization of patterns (Lee 1996). Patterning activities that are geometric in nature can serve as powerful contexts that engage students in algebraic thinking and visually support them in constructing a variety of generalizations and justifications (e.g., Healy and Hoyles 1999; Lannin 2005). In this…

Mixed twistor D-modules

CERN Document Server

Mochizuki, Takuro

2015-01-01

We introduce mixed twistor D-modules and establish their fundamental functorial properties. We also prove that they can be described as the gluing of admissible variations of mixed twistor structures. In a sense, mixed twistor D-modules can be regarded as a twistor version of M. Saito's mixed Hodge modules. Alternatively, they can be viewed as a mixed version of the pure twistor D-modules studied by C. Sabbah and the author. The theory of mixed twistor D-modules is one of the ultimate goals in the study suggested by Simpson's Meta Theorem, and it would form a foundation for the Hodge theory of holonomic D-modules which are not necessarily regular singular.  .

Mixed Waste Integrated Program: A technology assessment for mercury-containing mixed wastes

International Nuclear Information System (INIS)

Perona, J.J.; Brown, C.H.

1993-03-01

The treatment of mixed wastes must meet US Environmental Protection Agency (EPA) standards for chemically hazardous species and also must provide adequate control of the radioactive species. The US Department of Energy (DOE) Office of Technology Development established the Mixed Waste Integrated Program (MWIP) to develop mixed-waste treatment technology in support of the Mixed Low-Level Waste Program. Many DOE mixed-waste streams contain mercury. This report is an assessment of current state-of-the-art technologies for mercury separations from solids, liquids, and gases. A total of 19 technologies were assessed. This project is funded through the Chemical-Physical Technology Support Group of the MWIP

Final Scientific and Technical Report - Practical Fiber Delivered Laser Ignition Systems for Vehicles

Energy Technology Data Exchange (ETDEWEB)

Yalin, Azer [Seaforth, LLC

2014-03-30

Research has characterized advanced kagome fiber optics for their use in laser ignition systems. In comparison to past fibers used in laser ignition, these fibers have the important advantage of being relatively bend-insensitivity, so that they can be bent and coiled without degradation of output energy or beam quality. The results are very promising for practical systems. For pulse durations of ~12 ns, the fibers could deliver >~10 mJ pulses before damage onset. A study of pulse duration showed that by using longer pulse duration (~20 – 30 ns), it is possible to carry even higher pulse energy (by factor of ~2-3) which also provides future opportunities to implement longer duration sources. Beam quality measurements showed nearly single-mode output from the kagome fibers (i.e. M2 close to 1) which is the optimum possible value and, combined with their high pulse energy, shows the suitability of the fibers for laser ignition. Research has also demonstrated laser ignition of an engine including reliable (100%) ignition of a single-cylinder gasoline engine using the laser ignition system with bent and coiled kagome fiber. The COV of IMEP was <2% which is favorable for stable engine operation. These research results, along with the continued reduction in cost of laser sources, support our commercial development of practical laser ignition systems.

Mixed

Directory of Open Access Journals (Sweden)

Pau Baya

2011-05-01

Full Text Available Remenat (Catalan (Mixed, "revoltillo" (Scrambled in Spanish, is a dish which, in Catalunya, consists of a beaten egg cooked with vegetables or other ingredients, normally prawns or asparagus. It is delicious. Scrambled refers to the action of mixing the beaten egg with other ingredients in a pan, normally using a wooden spoon Thought is frequently an amalgam of past ideas put through a spinner and rhythmically shaken around like a cocktail until a uniform and dense paste is made. This malleable product, rather like a cake mixture can be deformed pulling it out, rolling it around, adapting its shape to the commands of one’s hands or the tool which is being used on it. In the piece Mixed, the contortion of the wood seeks to reproduce the plasticity of this slow heavy movement. Each piece lays itself on the next piece consecutively like a tongue of incandescent lava slowly advancing but with unstoppable inertia.

Unitarity constraints on trimaximal mixing

International Nuclear Information System (INIS)

Kumar, Sanjeev

2010-01-01

When the neutrino mass eigenstate ν 2 is trimaximally mixed, the mixing matrix is called trimaximal. The middle column of the trimaximal mixing matrix is identical to tribimaximal mixing and the other two columns are subject to unitarity constraints. This corresponds to a mixing matrix with four independent parameters in the most general case. Apart from the two Majorana phases, the mixing matrix has only one free parameter in the CP conserving limit. Trimaximality results in interesting interplay between mixing angles and CP violation. A notion of maximal CP violation naturally emerges here: CP violation is maximal for maximal 2-3 mixing. Similarly, there is a natural constraint on the deviation from maximal 2-3 mixing which takes its maximal value in the CP conserving limit.

Mixing vane grid spacer

International Nuclear Information System (INIS)

Patterson, J.F.; Galbraith, K.P.

1978-01-01

An improved mixing vane grid spacer having enhanced flow mixing capability by virtue of mixing vanes being positioned at welded intersecting joints of the spacer wherein each mixing vane has an opening or window formed therein substantially directly over the welded joint to provide improved flow mixing capability is described. Some of the vanes are slotted, depending on their particular location in the spacers. The intersecting joints are welded by initially providing consumable tabs at and within each window, which are consumed during the welding of the spacer joints

Mixed methods research.

Science.gov (United States)

Halcomb, Elizabeth; Hickman, Louise

2015-04-08

Mixed methods research involves the use of qualitative and quantitative data in a single research project. It represents an alternative methodological approach, combining qualitative and quantitative research approaches, which enables nurse researchers to explore complex phenomena in detail. This article provides a practical overview of mixed methods research and its application in nursing, to guide the novice researcher considering a mixed methods research project.

Mixed Connective Tissue Disease

Science.gov (United States)

Mixed connective tissue disease Overview Mixed connective tissue disease has signs and symptoms of a combination of disorders — primarily lupus, scleroderma and polymyositis. For this reason, mixed connective tissue disease ...

Mixed waste management options

International Nuclear Information System (INIS)

Owens, C.B.; Kirner, N.P.

1992-01-01

Currently, limited storage and treatment capacity exists for commercial mixed waste streams. No commercial mixed waste disposal is available, and it has been estimated that if and when commercial mixed waste disposal becomes available, the costs will be high. If high disposal fees are imposed, generators may be willing to apply extraordinary treatment or regulatory approaches to properly dispose of their mixed waste. This paper explores the feasibility of several waste management scenarios and management options. Existing data on commercially generated mixed waste streams are used to identify the realm of mixed waste known to be generated. Each waste stream is evaluated from both a regulatory and technical perspective in order to convert the waste into a strictly low-level radioactive or a hazardous waste. Alternative regulatory approaches evaluated in this paper include a delisting petition) no migration petition) and a treatability variance. For each waste stream, potentially available treatment options are identified that could lead to these variances. Waste minimization methodology and storage for decay are also considered. Economic feasibility of each option is discussed broadly. Another option for mixed waste management that is being explored is the feasibility of Department of Energy (DOE) accepting commercial mixed waste for treatment, storage, and disposal. A study has been completed that analyzes DOE treatment capacity in comparison with commercial mixed waste streams. (author)

MIXED AND MIXING SYSTEMS WORLDWIDE: A PREFACE

Directory of Open Access Journals (Sweden)

Seán Patrick Donlan

2012-09-01

Full Text Available This issue of the Potchefstroom Electronic Law Journal (South Africa sees thepublication of a selection of articles derived from the Third International Congress ofthe World Society of Mixed Jurisdiction Jurists (WSMJJ. That Congress was held atthe Hebrew University of Jerusalem, Israel in the summer of 2011. It reflected athriving Society consolidating its core scholarship on classical mixed jurisdictions(Israel, Louisiana, the Philippines, Puerto Rico, Quebec, Scotland, and South Africawhile reaching to new horizons (including Cyprus, Hong Kong and Macau, Malta,Nepal, etc. This publication reflects in microcosm the complexity of contemporaryscholarship on mixed and plural legal systems. This complexity is, of course, wellunderstoodby South African jurists whose system is derived both from the dominantEuropean traditions as well as from African customary systems, including both thosethat make up part of the official law of the state as well as those non-state norms thatcontinue to be important in the daily lives of many South Africans.

CFD simulation for thermal mixing of a SMART flow mixing header assembly

International Nuclear Information System (INIS)

Kim, Young In; Bae, Youngmin; Chung, Young Jong; Kim, Keung Koo

2015-01-01

Highlights: • Thermal mixing performance of a FMHA installed in SMART is investigated numerically. • Effects of operating condition and discharge hole configuration are examined. • FMHA performance satisfies the design requirements under various abnormal conditions. - Abstract: A flow mixing header assembly (FMHA) is installed in a system-integrated modular advanced reactor (SMART) to enhance the thermal mixing capability and create a uniform core flow distribution under both normal operation and accident conditions. In this study, the thermal mixing characteristics of the FMHA are investigated for various steam generator conditions using a commercial CFD code. Simulations include investigations for the effects of FMHA discharge flow rate differences, turbulence models, and steam generator conditions. The results of the analysis show that the FMHA works effectively for thermal mixing in various conditions and makes the temperature difference at the core inlet decrease noticeably. We verified that the mixing capability of the FMHA is excellent and satisfies the design requirement in all simulation cases tested here

Guidelines for mixed waste minimization

International Nuclear Information System (INIS)

Owens, C.

1992-02-01

Currently, there is no commercial mixed waste disposal available in the United States. Storage and treatment for commercial mixed waste is limited. Host States and compacts region officials are encouraging their mixed waste generators to minimize their mixed wastes because of management limitations. This document provides a guide to mixed waste minimization

THE MARKETING MIX OPTIMIZATION

Directory of Open Access Journals (Sweden)

SABOU FELICIA

2014-02-01

Full Text Available ing mix a particularly important issue is to choose the best combination of its variables, this lead to the achievement objectives, in time. Choosing the right marketing mix is possible only by reporting information to some clear benchmarks, these criteria a related to the objective of the company at the time of analyze. The study shows that the companies must give a great importance to optimize the marketing mix, because of how its combines and integrates company policies relating to the product, price, distribution and promotion, depends the success or the failure on its market. The practice has shown that if an element of the marketing mix is wrong implemented, marketing strategies and programs do not achieve their objectives, and the company can not generate the expected profit. To optimize the marketing mix, companies should consider the following issues: the resources (materials, financial and human, which will be properly allocated to all the elements of the marketing mix, the specific marketing tools and the relationship of interdependence of all the methods and tools used to optimize the marketing mix.

Reliability and validity of a brief method to assess nociceptive flexion reflex (NFR) threshold.

Science.gov (United States)

Rhudy, Jamie L; France, Christopher R

2011-07-01

The nociceptive flexion reflex (NFR) is a physiological tool to study spinal nociception. However, NFR assessment can take several minutes and expose participants to repeated suprathreshold stimulations. The 4 studies reported here assessed the reliability and validity of a brief method to assess NFR threshold that uses a single ascending series of stimulations (Peak 1 NFR), by comparing it to a well-validated method that uses 3 ascending/descending staircases of stimulations (Staircase NFR). Correlations between the NFR definitions were high, were on par with test-retest correlations of Staircase NFR, and were not affected by participant sex or chronic pain status. Results also indicated the test-retest reliabilities for the 2 definitions were similar. Using larger stimulus increments (4 mAs) to assess Peak 1 NFR tended to result in higher NFR threshold estimates than using the Staircase NFR definition, whereas smaller stimulus increments (2 mAs) tended to result in lower NFR threshold estimates than the Staircase NFR definition. Neither NFR definition was correlated with anxiety, pain catastrophizing, or anxiety sensitivity. In sum, a single ascending series of electrical stimulations results in a reliable and valid estimate of NFR threshold. However, caution may be warranted when comparing NFR thresholds across studies that differ in the ascending stimulus increments. This brief method to assess NFR threshold is reliable and valid; therefore, it should be useful to clinical pain researchers interested in quickly assessing inter- and intra-individual differences in spinal nociceptive processes. Copyright © 2011 American Pain Society. Published by Elsevier Inc. All rights reserved.

Effect of mixing method on the mixing degree during the preparation of triturations.

Science.gov (United States)

Nakamura, Hitoshi; Yanagihara, Yoshitsugu; Sekiguchi, Hiroko; Komada, Fusao; Kawabata, Haruno; Ohtani, Michiteru; Saitoh, Yukiya; Kariya, Satoru; Suzuki, Hiroshi; Uchino, Katsuyoshi; Iga, Tatsuji

2004-03-01

By using lactose colored with erythrocin, we investigated the effects of mixing methods on mixing degree during the preparation of trituration with a mortar and pestle. The extent of powder dilution was set to 4 to 64 fold in the experiments. We compared the results obtained by using two methods: (1) one-step mixing of powders after addition of diluents and (2) gradual mixing of powders after addition of diluents. As diluents, we used crystallized lactose and powdered lactose for the preparation of trituration. In the preparation of 64-fold trituration, an excellent degree of mixing was obtained, with CV values of less than 6.08%, for both preparation methods and for the two kinds of diluents. The mixing of two kinds of powders whose distributions of particle sizes were similar resulted in much better degree of mixing, with CV values of less than 3.0%. However, the concentration of principal agents in 64-fold trituration was reduced by 20% due to the adsorption of dye to the apparatus. Under conditions in which a much higher dilution rate and/or much better degree of dilution was required, it must be necessary to dilute powders with considering their physicality and to determine the concentrations of principal agents after the mixing.

Hydraulic jett mixing

International Nuclear Information System (INIS)

Ackerman, J.R.

1989-01-01

Efficient mixing of reactants into a waste stream has always been a problem in that there has been no mixer capable of combining all the elements of enhanced mixing into a single piece of equipment. Through the development of a mixing system for the mining industry to treat acid mine water containing heavy metals, a versatile new hydraulic jetting static mixer has been developed that has no moving parts and a clean bore with no internal components. This paper reports that the main goal of the development of the hydraulic jett mixer was to reduce the size of the tankage required for an acid mine drainage (AMD) treatment plant through development of a static mixing device that could coincidentally aerate the treatment flow. This process equipment being developed would simultaneously adjust the pH and oxidize the metals allowing formation of the hydroxide sludges required for sedimentation and removal of the metals from the treatment stream. In effect, the device eliminates two reaction tanks, the neutralization/mixing tank and the aeration tank

The mixing of fluids

International Nuclear Information System (INIS)

Ottino, J.M.

1989-01-01

What do the eruption of Krakatau, the manufacture of puff pastry and the brightness of stars have in common? Each involves some aspect of mixing. Mixing also plays a critical role in modern technology. Chemical engineers rely on mixing to ensure that substances react properly, to produce polymer blends that exhibit unique properties and to disperse drag-reducing agents in pipelines. Yet in spite of its of its ubiquity in nature and industry, mixing is only imperfectly under-stood. Indeed, investigators cannot even settle on a common terminology: mixing is often referred to as stirring by oceanographers and geophysicists, as blending by polymer engineers and as agitation by process engineers. Regardless of what the process is called, there is little doubt that it is exceedingly complex and is found in a great variety of systems. In constructing a theory of fluid mixing, for example, one has to take into account fluids that can be miscible or partially miscible and reactive or inert, and flows that are slow and orderly or very fast and turbulent. It is therefore not surprising that no single theory can explain all aspect of mixing in fluids and that straightforward computations usually fail to capture all the important details. Still, both physical experiments and computer simulations can provide insight into the mixing process. Over the past several years the authors and his colleague have taken both approaches in an effort to increase understanding of various aspect of the process-particularly of mixing involving slow flows and viscous fluids such as oils

Limits to fuel/coolant mixing

International Nuclear Information System (INIS)

Corradini, M.L.; Moses, G.A.

1985-01-01

The vapor explosion process involves the mixing of fuel with coolant prior to the explosion. A number of analysts have identified limits to the amount of fuel/coolant mixing that could occur within the reactor vessel following a core melt accident. Past models are reviewed and a sim plified approach is suggested to estimate the upper limit on the amount of fuel/coolant mixing pos sible. The approach uses concepts first advanced by Fauske in a different way. The results indicat that water depth is an important parameter as well as the mixing length scale D /SUB mix/ , and for large values of D /SUB mix/ the fuel mass mixed is limited to <7% of the core mass

SPORT MARKETING MIX STRATEGIES

OpenAIRE

Alexandru Lucian MIHAI

2013-01-01

This paper presents a brief overview of a significant element of the sport marketing management model called the marketing mix. The marketing mix is crucial because it defines the sport business, and much of the sport marketer’s time is spent on various functions within the marketing mix. The marketing mix is the strategic combination of the product, price, place and promotion elements. These elements are typically called the four Ps of marketing. Decisions and strategies for each are importa...

THE MARKETING MIX OPTIMIZATION

OpenAIRE

SABOU FELICIA

2014-01-01

The paper presents the marketing mix and the necessity of the marketing mix optimization. In the marketing mix a particularly important issue is to choose the best combination of its variables, this lead to the achievement objectives, in time. Choosing the right marketing mix is possible only by reporting information to some clear benchmarks, these criteria a related to the objective of the company at the time of analyze. The study shows that the companies must give a great importance to opti...

The MIXED framework: A novel approach to evaluating mixed-methods rigor.

Science.gov (United States)

Eckhardt, Ann L; DeVon, Holli A

2017-10-01

Evaluation of rigor in mixed-methods (MM) research is a persistent challenge due to the combination of inconsistent philosophical paradigms, the use of multiple research methods which require different skill sets, and the need to combine research at different points in the research process. Researchers have proposed a variety of ways to thoroughly evaluate MM research, but each method fails to provide a framework that is useful for the consumer of research. In contrast, the MIXED framework is meant to bridge the gap between an academic exercise and practical assessment of a published work. The MIXED framework (methods, inference, expertise, evaluation, and design) borrows from previously published frameworks to create a useful tool for the evaluation of a published study. The MIXED framework uses an experimental eight-item scale that allows for comprehensive integrated assessment of MM rigor in published manuscripts. Mixed methods are becoming increasingly prevalent in nursing and healthcare research requiring researchers and consumers to address issues unique to MM such as evaluation of rigor. © 2017 John Wiley & Sons Ltd.

Finite-difference time-domain modeling of curved material interfaces by using boundary condition equations method

International Nuclear Information System (INIS)

Lu Jia; Zhou Huaichun

2016-01-01

To deal with the staircase approximation problem in the standard finite-difference time-domain (FDTD) simulation, the two-dimensional boundary condition equations (BCE) method is proposed in this paper. In the BCE method, the standard FDTD algorithm can be used as usual, and the curved surface is treated by adding the boundary condition equations. Thus, while maintaining the simplicity and computational efficiency of the standard FDTD algorithm, the BCE method can solve the staircase approximation problem. The BCE method is validated by analyzing near field and far field scattering properties of the PEC and dielectric cylinders. The results show that the BCE method can maintain a second-order accuracy by eliminating the staircase approximation errors. Moreover, the results of the BCE method show good accuracy for cylinder scattering cases with different permittivities. (paper)

Experimental Study on Superfine Sand Concrete Mixed by Double Mixing Technology

OpenAIRE

yuqing zhao

2013-01-01

Traditional concept thought that medium sand and fine sand can be used to mix concrete, superfine sand can not used to mix concrete. This makes the source of superfine sand limited. With the shortage of medium sand and fine sand, it is imperative to exploit the resource of superfine sand. Superfine sand concrete is mixed by means of Double-doped Technology-ultra-fine fly ash and super plasticizer. Primary factor influencing superfine sand concrete strength is studied by orthogonal test, the o...

Optimizing the strategic patient mix

NARCIS (Netherlands)

Vanberkel, P.T.; Boucherie, Richardus J.; Hans, Elias W.; Hurink, Johann L.

In this paper we address the decision of choosing a patient mix for a hospital that leads to the most beneficial treatment case mix. We illustrate how capacity, case mix and patient mix decisions are interrelated and how understanding this complex relationship is crucial for achieving the maximum

Warm Mix Asphalt

Science.gov (United States)

2009-04-17

State of Alaska State of Alaska - Warm Mix Project Warm Mix Project: Location - Petersburg, Alaska which is Petersburg, Alaska which is located in the heart of Southeast Alaska located in the heart of Southeast Alaska's Inside Passage at the tip of M...

Monitoring the Wobbe Index of Natural Gas Using Fiber-Enhanced Raman Spectroscopy.

Science.gov (United States)

Sandfort, Vincenz; Trabold, Barbara M; Abdolvand, Amir; Bolwien, Carsten; Russell, Philip St. J; Wöllenstein, Jürgen; Palzer, Stefan

2017-11-24

The fast and reliable analysis of the natural gas composition requires the simultaneous quantification of numerous gaseous components. To this end, fiber-enhanced Raman spectroscopy is a powerful tool to detect most components in a single measurement using a single laser source. However, practical issues such as detection limit, gas exchange time and background Raman signals from the fiber material still pose obstacles to utilizing the scheme in real-world settings. This paper compares the performance of two types of hollow-core photonic crystal fiber (PCF), namely photonic bandgap PCF and kagomé-style PCF, and assesses their potential for online determination of the Wobbe index. In contrast to bandgap PCF, kagomé-PCF allows for reliable detection of Raman-scattered photons even below 1200 cm -1 , which in turn enables fast and comprehensive assessment of the natural gas quality of arbitrary mixtures.

Passive Mixing inside Microdroplets

Directory of Open Access Journals (Sweden)

Chengmin Chen

2018-04-01

Full Text Available Droplet-based micromixers are essential units in many microfluidic devices for widespread applications, such as diagnostics and synthesis. The mixers can be either passive or active. When compared to active methods, the passive mixer is widely used because it does not require extra energy input apart from the pump drive. In recent years, several passive droplet-based mixers were developed, where mixing was characterized by both experiments and simulation. A unified physical understanding of both experimental processes and simulation models is beneficial for effectively developing new and efficient mixing techniques. This review covers the state-of-the-art passive droplet-based micromixers in microfluidics, which mainly focuses on three aspects: (1 Mixing parameters and analysis method; (2 Typical mixing element designs and the mixing characters in experiments; and, (3 Comprehensive introduction of numerical models used in microfluidic flow and diffusion.

Multi-Wave Mixing Processes

CERN Document Server

Zhang, Yanpeng

2009-01-01

"Multi-Wave Mixing Processes - From Ultrafast Polarization Beats to Electromagnetically Induced Transparency" discusses the interactions of efficient multi-wave mixing (MWM) processes enhanced by atomic coherence in multilevel atomic systems. It covers topics in five major areas: attosecond and femtosecond polarization beats of four-wave mixing (FWM) processes; heterodyne detection of FWM, six-wave mixing (SWM) and eight-wave mixing (EWM) processes; Raman and Rayleigh enhanced polarization beats; coexistence and interactions of MWM processes via electromagnetically induced transparency(EIT); multi-dressing MWM processes. The book is intended for researchers, advanced undergraduate and graduate students in Nonlinear Optics. Dr. Yanpeng Zhang is a professor at the Key Laboratory for Physical Electronics and Devices of the Ministry of Education, Xi'an Jiaotong University. Dr. Min Xiao is a professor of Physics at University of Arkansas, Fayetteville, U.S.A.

Application of the Fokker-Planck molecular mixing model to turbulent scalar mixing using moment methods

Science.gov (United States)

Madadi-Kandjani, E.; Fox, R. O.; Passalacqua, A.

2017-06-01

An extended quadrature method of moments using the β kernel density function (β -EQMOM) is used to approximate solutions to the evolution equation for univariate and bivariate composition probability distribution functions (PDFs) of a passive scalar for binary and ternary mixing. The key element of interest is the molecular mixing term, which is described using the Fokker-Planck (FP) molecular mixing model. The direct numerical simulations (DNSs) of Eswaran and Pope ["Direct numerical simulations of the turbulent mixing of a passive scalar," Phys. Fluids 31, 506 (1988)] and the amplitude mapping closure (AMC) of Pope ["Mapping closures for turbulent mixing and reaction," Theor. Comput. Fluid Dyn. 2, 255 (1991)] are taken as reference solutions to establish the accuracy of the FP model in the case of binary mixing. The DNSs of Juneja and Pope ["A DNS study of turbulent mixing of two passive scalars," Phys. Fluids 8, 2161 (1996)] are used to validate the results obtained for ternary mixing. Simulations are performed with both the conditional scalar dissipation rate (CSDR) proposed by Fox [Computational Methods for Turbulent Reacting Flows (Cambridge University Press, 2003)] and the CSDR from AMC, with the scalar dissipation rate provided as input and obtained from the DNS. Using scalar moments up to fourth order, the ability of the FP model to capture the evolution of the shape of the PDF, important in turbulent mixing problems, is demonstrated. Compared to the widely used assumed β -PDF model [S. S. Girimaji, "Assumed β-pdf model for turbulent mixing: Validation and extension to multiple scalar mixing," Combust. Sci. Technol. 78, 177 (1991)], the β -EQMOM solution to the FP model more accurately describes the initial mixing process with a relatively small increase in computational cost.

Protocol Fuel Mix reporting

International Nuclear Information System (INIS)

2002-07-01

The protocol in this document describes a method for an Electricity Distribution Company (EDC) to account for the fuel mix of electricity that it delivers to its customers, based on the best available information. Own production, purchase and sale of electricity, and certificates trading are taken into account. In chapter 2 the actual protocol is outlined. In the appendixes additional (supporting) information is given: (A) Dutch Standard Fuel Mix, 2000; (B) Calculation of the Dutch Standard fuel mix; (C) Procedures to estimate and benchmark the fuel mix; (D) Quality management; (E) External verification; (F) Recommendation for further development of the protocol; (G) Reporting examples

Music Mixing Surface

DEFF Research Database (Denmark)

Gelineck, Steven; Büchert, Morten; Andersen, Jesper

2013-01-01

This paper presents a multi-touch based interface for mixing music. The goal of the interface is to provide users with a more intuitive control of the music mix by implementing the so-called stage metaphor control scheme, which is especially suitable for multi-touch surfaces. Specifically, we...

Panel-basierte Mixed-Methods-Studien

OpenAIRE

Legewie, Nicolas; Tucci, Ingrid

2016-01-01

Mixed-Methods-Studien erfreuen sich wachsender Beliebtheit. Immer mehr Studien nutzen dabei auch Panel-basierte Mixed-Methods-Designs, in denen bestehende Längsschnittstudien durch qualitative Befragungsformen ergänzt werden. Innerhalb der reichhaltigen Veröffentlichungen zum Thema Mixed-Methods-Forschung finden sich bisher aber kaum Diskussionen solcher Mixed-Methods-Designs. Im vorliegenden Artikel diskutieren wir Design, Durchführung, sowie Potenzialeund Herausforderungen von Panel-basiert...

Sv. Václav jako scala coeli. (K interpretaci nástěnných maleb schodiště Velké věže na hradě Karlštejně)

Czech Academy of Sciences Publication Activity Database

Studničková, Milada

2006-01-01

Roč. 13, příl. (2006), s. 71-77 ISSN 1212-1487. [Schodištní cykly Velké věže hradu Karlštejna. Stav po restaurování. Praha, 05.05.2004-07.05.2004] Institutional research plan: CEZ:AV0Z80330511 Keywords : Karlštejn * staircase of the Large tower * symbology of the staircase * St Wenceslas * Gothic painting Subject RIV: AL - Art, Architecture, Cultural Heritage

Isospin mixing in light nuclei

International Nuclear Information System (INIS)

Ludwig, E.J.; Clegg, T.B.; Fauber, R.E.; Karwowski, H.J.; Mooney, T.M.; Thompson, W.J.

1985-01-01

This program has provided accurate measurements of isospin mixing (ΔT = 1,2) in proton elastic scattering on even-even target nuclei up to A = 40. In order to improve experimental results and to test the hypothesis that isospin mixing is dominated by mixing in the target ground state (as opposed to mixing in the compound system) the authors have undertaken to (1) extend the proton scattering results to additional T = 3/2 states in certain compound systems and (2) examine processes which can proceed by only isotensor mixing (ΔT = 2) in order to isolate the effects of that contribution

Percolation transitions in two dimensions

NARCIS (Netherlands)

Feng, X.; Deng, Y.; Blöte, H.W.J.

2008-01-01

We investigate bond- and site-percolation models on several two-dimensional lattices numerically, by means of transfer-matrix calculations and Monte Carlo simulations. The lattices include the square, triangular, honeycomb kagome, and diced lattices with nearest-neighbor bonds, and the square

Combining the power of stories and the power of numbers: mixed methods research and mixed studies reviews.

Science.gov (United States)

Pluye, Pierre; Hong, Quan Nha

2014-01-01

This article provides an overview of mixed methods research and mixed studies reviews. These two approaches are used to combine the strengths of quantitative and qualitative methods and to compensate for their respective limitations. This article is structured in three main parts. First, the epistemological background for mixed methods will be presented. Afterward, we present the main types of mixed methods research designs and techniques as well as guidance for planning, conducting, and appraising mixed methods research. In the last part, we describe the main types of mixed studies reviews and provide a tool kit and examples. Future research needs to offer guidance for assessing mixed methods research and reporting mixed studies reviews, among other challenges.

Lagrangian Studies of Lateral Mixing

Science.gov (United States)

2017-09-19

Final Technical 3. DATES COVERED (From - To) 01/01/2009 – 12/31/2015 4. TITLE AND SUBTITLE Lagrangian Studies of Lateral Mixing 5a. CONTRACT NUMBER...public release; distribution is unlimited. 13. SUPPLEMENTARY NOTES 14. ABSTRACT The Lateral Mixing Experiment (LATMIX) focused on mixing and...anomalies. LATMIX2 targeted the wintertime Gulf Stream, where deep mixed layers, strong lateral density gradients (Gulf Stream north wall) and the

Good mixing length: Digital simulation of fluid mixing with and without obstacles

International Nuclear Information System (INIS)

Suarez Antola, R.; Burgos, D.

2006-07-01

The good mixing length of a tracer assures that the samples or measures taken are fair. A non homogeneous tracer mixing through the cross section of the fluid medium involved in the experiment (eg. a river or a pipe) may conduct to erroneous conclusions. For establishing that length, a digital simulation of a two dimensional fluid flow, using Navier-Stokes equations, was done. A continuous tracer injection was simulated.The good mixing length was studied in two cases, first with a free of obstacles situation and then the effect of a significant obstacle located after the tracer injection point. As usual in practice, the good mixing length was estimated using a suitable upper bound for the concentration deviations from the mean in a given cross section. An analytical discussion of the obtained results is done

Mixed plastics recycling technology

CERN Document Server

Hegberg, Bruce

1995-01-01

Presents an overview of mixed plastics recycling technology. In addition, it characterizes mixed plastics wastes and describes collection methods, costs, and markets for reprocessed plastics products.

Understanding Mixed Emotions: Paradigms and Measures

Science.gov (United States)

Kreibig, Sylvia D.; Gross, James J.

2017-01-01

In this review, we examine the paradigms and measures available for experimentally studying mixed emotions in the laboratory. For eliciting mixed emotions, we describe a mixed emotions film library that allows for the repeated elicitation of a specific homogeneous mixed emotional state and appropriately matched pure positive, pure negative, and neutral emotional states. For assessing mixed emotions, we consider subjective and objective measures that fall into univariate, bivariate, and multivariate measurement categories. As paradigms and measures for objectively studying mixed emotions are still in their early stages, we conclude by outlining future directions that focus on the reliability, temporal dynamics, and response coherence of mixed emotions paradigms and measures. This research will build a strong foundation for future studies and significantly advance our understanding of mixed emotions. PMID:28804752

Collaboration Patterns as a Function of Article Genre among Mixed Researchers: A Mixed Methods Bibliometric Study

Science.gov (United States)

Jordan, John; Wachsmann, Melanie; Hoisington, Susan; Gonzalez, Vanessa; Valle, Rachel; Lambert, Jarod; Aleisa, Majed; Wilcox, Rachael; Benge, Cindy L.; Onwuegbuzie, Anthony J.

2017-01-01

Surprisingly, scant information exists regarding the collaboration patterns of mixed methods researchers. Thus, the purpose of this mixed methods bibliometric study was to examine (a) the distribution of the number of co-authors in articles published in the flagship mixed methods research journal (i.e., "Journal of Mixed Methods…

Development of two mix model postprocessors for the investigation of shell mix in indirect drive implosion cores

International Nuclear Information System (INIS)

Welser-Sherrill, L.; Mancini, R. C.; Haynes, D. A.; Haan, S. W.; Koch, J. A.; Izumi, N.; Tommasini, R.; Golovkin, I. E.; MacFarlane, J. J.; Radha, P. B.; Delettrez, J. A.; Regan, S. P.; Smalyuk, V. A.

2007-01-01

The presence of shell mix in inertial confinement fusion implosion cores is an important characteristic. Mixing in this experimental regime is primarily due to hydrodynamic instabilities, such as Rayleigh-Taylor and Richtmyer-Meshkov, which can affect implosion dynamics. Two independent theoretical mix models, Youngs' model and the Haan saturation model, were used to estimate the level of Rayleigh-Taylor mixing in a series of indirect drive experiments. The models were used to predict the radial width of the region containing mixed fuel and shell materials. The results for Rayleigh-Taylor mixing provided by Youngs' model are considered to be a lower bound for the mix width, while those generated by Haan's model incorporate more experimental characteristics and consequently have larger mix widths. These results are compared with an independent experimental analysis, which infers a larger mix width based on all instabilities and effects captured in the experimental data

Determining Σ-Λ mixing

Energy Technology Data Exchange (ETDEWEB)

Horsley, R. [Edinburgh Univ. (United Kingdom). School of Physics and Astronomy; Najjar, J. [Regensburg Univ. (Germany). Inst. fuer Theoretische Physik; Nakamura, Y. [RIKEN Advanced Institute for Computational Science, Kobe (Japan); Perlt, H.; Schiller, A. [Leipzig Univ. (Germany). Inst. fuer Theoretische Physik; Pleiter, D. [Forschungszentrum Juelich GmbH (Germany). Juelich Supercomputing Centre (JSC); Regensburg Univ. (Germany). Inst. fuer Theoretische Physik; Rakow, P.E.L. [Liverpool Univ. (United Kingdom). Theoretical Physics Div.; Schierholz, G. [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Stueben, H. [Hamburg Univ. (Germany). Regionales Rechenzentrum; Zanotti, J.M. [Adelaide Univ. (Australia). CSSM, School of Chemistry and Physics

2014-12-15

SU2 isospin breaking effects in baryon octet (and decuplet) masses are due to a combination of up and down quark mass differences and electromagnetic effects. These mass differences are small. Between the Sigma and Lambda the mass splitting is much larger, but this is mostly due to their different wavefunctions. However there is now also mixing between these states. We determine the QCD mixing matrix and hence find the mixing angle and mass splitting.

Permitting mixed waste treatment, storage and disposal facilities: A mixed bag

International Nuclear Information System (INIS)

Ranek, N.L.; Coalgate, J.L.

1995-01-01

The Federal Facility Compliance Act of 1992 (FFCAct) requires the U.S. Department of Energy (DOE) to make a comprehensive national inventory of its mixed wastes (i.e., wastes that contain both a hazardous component that meets the Resource Conservation and Recovery Act (RCRA) definition of hazardous waste and a radioactive component consisting of source, special nuclear, or byproduct material regulated under the Atomic Energy Act (AEA)), and of its mixed waste treatment technologies and facilities. It also requires each DOE facility that stores or generates mixed waste to develop a treatment plan that includes, in part, a schedule for constructing units to treat those wastes that can be treated using existing technologies. Inherent in constructing treatment units for mixed wastes is, of course, permitting. This paper identifies Federal regulatory program requirements that are likely to apply to new DOE mixed waste treatment units. The paper concentrates on showing how RCRA permitting requirements interrelate with the permitting or licensing requirements of such other laws as the Atomic Energy Act, the Clean Water Act, and the Clean Air Act. Documentation needed to support permit applications under these laws are compared with RCRA permit application documentation. National Environmental Policy Act (NEPA) documentation requirements are also addressed, and throughout the paper, suggestions are made for managing the permitting process

Mixed waste: Proceedings

International Nuclear Information System (INIS)

Moghissi, A.A.; Blauvelt, R.K.; Benda, G.A.; Rothermich, N.E.

1993-01-01

This volume contains the peer-reviewed and edited versions of papers submitted for presentation a the Second International Mixed Waste Symposium. Following the tradition of the First International Mixed Waste Symposium, these proceedings were prepared in advance of the meeting for distribution to participants. The symposium was organized by the Mixed Waste Committee of the American Society of Mechanical Engineers. The topics discussed at the symposium include: stabilization technologies, alternative treatment technologies, regulatory issues, vitrification technologies, characterization of wastes, thermal technologies, laboratory and analytical issues, waste storage and disposal, organic treatment technologies, waste minimization, packaging and transportation, treatment of mercury contaminated wastes and bioprocessing, and environmental restoration. Individual abstracts are catalogued separately for the data base

Mixed waste: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Moghissi, A.A.; Blauvelt, R.K.; Benda, G.A.; Rothermich, N.E. [eds.] [Temple Univ., Philadelphia, PA (United States). Dept. of Environmental Safety and Health

1993-12-31

This volume contains the peer-reviewed and edited versions of papers submitted for presentation a the Second International Mixed Waste Symposium. Following the tradition of the First International Mixed Waste Symposium, these proceedings were prepared in advance of the meeting for distribution to participants. The symposium was organized by the Mixed Waste Committee of the American Society of Mechanical Engineers. The topics discussed at the symposium include: stabilization technologies, alternative treatment technologies, regulatory issues, vitrification technologies, characterization of wastes, thermal technologies, laboratory and analytical issues, waste storage and disposal, organic treatment technologies, waste minimization, packaging and transportation, treatment of mercury contaminated wastes and bioprocessing, and environmental restoration. Individual abstracts are catalogued separately for the data base.

A scoring system for appraising mixed methods research, and concomitantly appraising qualitative, quantitative and mixed methods primary studies in Mixed Studies Reviews.

Science.gov (United States)

Pluye, Pierre; Gagnon, Marie-Pierre; Griffiths, Frances; Johnson-Lafleur, Janique

2009-04-01

A new form of literature review has emerged, Mixed Studies Review (MSR). These reviews include qualitative, quantitative and mixed methods studies. In the present paper, we examine MSRs in health sciences, and provide guidance on processes that should be included and reported. However, there are no valid and usable criteria for concomitantly appraising the methodological quality of the qualitative, quantitative and mixed methods studies. To propose criteria for concomitantly appraising the methodological quality of qualitative, quantitative and mixed methods studies or study components. A three-step critical review was conducted. 2322 references were identified in MEDLINE, and their titles and abstracts were screened; 149 potentially relevant references were selected and the full-text papers were examined; 59 MSRs were retained and scrutinized using a deductive-inductive qualitative thematic data analysis. This revealed three types of MSR: convenience, reproducible, and systematic. Guided by a proposal, we conducted a qualitative thematic data analysis of the quality appraisal procedures used in the 17 systematic MSRs (SMSRs). Of 17 SMSRs, 12 showed clear quality appraisal procedures with explicit criteria but no SMSR used valid checklists to concomitantly appraise qualitative, quantitative and mixed methods studies. In two SMSRs, criteria were developed following a specific procedure. Checklists usually contained more criteria than needed. In four SMSRs, a reliability assessment was described or mentioned. While criteria for quality appraisal were usually based on descriptors that require specific methodological expertise (e.g., appropriateness), no SMSR described the fit between reviewers' expertise and appraised studies. Quality appraisal usually resulted in studies being ranked by methodological quality. A scoring system is proposed for concomitantly appraising the methodological quality of qualitative, quantitative and mixed methods studies for SMSRs. This

Marketingový mix Fitbox Kladno

OpenAIRE

Šíma, Jiří

2016-01-01

Title: MARKETING MIX OF FIT BOX KLADNO Aims: The aim of this thesis is to collect information on the operation of the marketing mix from the customers and managers point of view. Based on these findings new proposal and recommendations were suggested in order to improve existing marketing mix. Methods: The analysis of marketing mix was performed by marketing research through questionnaire, interview and observation. Results: According to the results customers are least satisfied with changing...

Mixed and Complex Mixed Migration during Armed Conflict: Multidimensional Empirical Evidence from Nepal.

Science.gov (United States)

Williams, Nathalie E

Historically, legal, policy, and academic communities largely ascribed to a dichotomy between forced and voluntary migration, creating a black and white vision that was convenient for legal and policy purposes. More recently, discussions have begun addressing the possibility of mixed migration, acknowledging that there is likely a wide continuum between forced and voluntary, and most migrants likely move with some amount of compulsion and some volition, even during armed conflict. While the mixed migration hypothesis is well-received, empirical evidence is disparate and somewhat blunt at this point. In this article, I contribute a direct theoretical and causal pathway discussion of mixed migration. I also propose the complex mixed migration hypothesis, which argues that not only do non-conflict related factors influence migration during conflict, but they do so differently than during periods of relative peace. I empirically test both hypotheses in the context of the recent armed conflict in Nepal. Using detailed survey data and event history models, results provide strong evidence for both mixed migration and complex mixed migration during conflict hypotheses. These hypotheses and evidence suggest that armed conflict might have substantial impacts on long-term population growth and change, with significant relevance in both academic and policy spheres.

Mixed parentage

DEFF Research Database (Denmark)

Bang Appel, Helene; Singla, Rashmi

2016-01-01

Despite an increase in cross border intimate relationships and children of mixed parentage, there is little mention or scholarship about them in the area of childhood and migrancy in the Nordic countries. The international literature implies historical pathologisation, contestation and current...... of identity formation in the . They position themselves as having an “in-between” identity or “ just Danes” in their every day lives among friends, family, and during leisure activities. Thus a new paradigm is evolving away- from the pathologisation of mixed children, simplified one-sided categories...

Mixed Waste Working Group report

International Nuclear Information System (INIS)

1993-01-01

The treatment of mixed waste remains one of this country's most vexing environmental problems. Mixed waste is the combination of radioactive waste and hazardous waste, as defined by the Resource Conservation and Recovery Act (RCRA). The Department of Energy (DOE), as the country's largest mixed waste generator, responsible for 95 percent of the Nation's mixed waste volume, is now required to address a strict set of milestones under the Federal Facility Compliance Act of 1992. DOE's earlier failure to adequately address the storage and treatment issues associated with mixed waste has led to a significant backlog of temporarily stored waste, significant quantities of buried waste, limited permanent disposal options, and inadequate treatment solutions. Between May and November of 1993, the Mixed Waste Working Group brought together stakeholders from around the Nation. Scientists, citizens, entrepreneurs, and bureaucrats convened in a series of forums to chart a course for accelerated testing of innovative mixed waste technologies. For the first time, a wide range of stakeholders were asked to examine new technologies that, if given the chance to be tested and evaluated, offer the prospect for better, safer, cheaper, and faster solutions to the mixed waste problem. In a matter of months, the Working Group has managed to bridge a gap between science and perception, engineer and citizen, and has developed a shared program for testing new technologies

Compressibility effects on turbulent mixing

Science.gov (United States)

Panickacheril John, John; Donzis, Diego

2016-11-01

We investigate the effect of compressibility on passive scalar mixing in isotropic turbulence with a focus on the fundamental mechanisms that are responsible for such effects using a large Direct Numerical Simulation (DNS) database. The database includes simulations with Taylor Reynolds number (Rλ) up to 100, turbulent Mach number (Mt) between 0.1 and 0.6 and Schmidt number (Sc) from 0.5 to 1.0. We present several measures of mixing efficiency on different canonical flows to robustly identify compressibility effects. We found that, like shear layers, mixing is reduced as Mach number increases. However, data also reveal a non-monotonic trend with Mt. To assess directly the effect of dilatational motions we also present results with both dilatational and soleniodal forcing. Analysis suggests that a small fraction of dilatational forcing decreases mixing time at higher Mt. Scalar spectra collapse when normalized by Batchelor variables which suggests that a compressive mechanism similar to Batchelor mixing in incompressible flows might be responsible for better mixing at high Mt and with dilatational forcing compared to pure solenoidal mixing. We also present results on scalar budgets, in particular on production and dissipation. Support from NSF is gratefully acknowledged.

The resilience of paradigm mixes

DEFF Research Database (Denmark)

Daugbjerg, Carsten; Farsund, Arild Aurvåg; Langhelle, Oluf

2017-01-01

This paper argues that a policy regime based on a paradigm mix may be resilient when challenged by changing power balances and new agendas. Controversies between the actors can be contained within the paradigm mix as it enables them to legitimize different ideational positions. Rather than engaging...... context changed. The paradigm mix proved sufficiently flexible to accommodate food security concerns and at the same time continue to take steps toward further liberalization. Indeed, the main players have not challenged the paradigm mix....

Monitoring the Wobbe Index of Natural Gas Using Fiber-Enhanced Raman Spectroscopy

Directory of Open Access Journals (Sweden)

Vincenz Sandfort

2017-11-01

Full Text Available The fast and reliable analysis of the natural gas composition requires the simultaneous quantification of numerous gaseous components. To this end, fiber-enhanced Raman spectroscopy is a powerful tool to detect most components in a single measurement using a single laser source. However, practical issues such as detection limit, gas exchange time and background Raman signals from the fiber material still pose obstacles to utilizing the scheme in real-world settings. This paper compares the performance of two types of hollow-core photonic crystal fiber (PCF, namely photonic bandgap PCF and kagomé-style PCF, and assesses their potential for online determination of the Wobbe index. In contrast to bandgap PCF, kagomé-PCF allows for reliable detection of Raman-scattered photons even below 1200 cm−1, which in turn enables fast and comprehensive assessment of the natural gas quality of arbitrary mixtures.

Authoring Immersive Mixed Reality Experiences

Science.gov (United States)

Misker, Jan M. V.; van der Ster, Jelle

Creating a mixed reality experience is a complicated endeavour. From our practice as a media lab in the artistic domain we found that engineering is “only” a first step in creating a mixed reality experience. Designing the appearance and directing the user experience are equally important for creating an engaging, immersive experience. We found that mixed reality artworks provide a very good test bed for studying these topics. This chapter details three steps required for authoring mixed reality experiences: engineering, designing and directing. We will describe a platform (VGE) for creating mixed reality environments that incorporates these steps. A case study (EI4) is presented in which this platform was used to not only engineer the system, but in which an artist was given the freedom to explore the artistic merits of mixed reality as an artistic medium, which involved areas such as the look and feel, multimodal experience and interaction, immersion as a subjective emotion and game play scenarios.

Competition between Dispersion and Absorption of Doubly-Dressed Four-Wave Mixing and Dressed Six-Wave Mixing

International Nuclear Information System (INIS)

Lei-Jian, Shen; Chuang-She, Li; Yi-Gang, Du; Cui-Cui, Zuo; Zhi-Qiang, Nie; Yan-Peng, Zhang; Yuan-Yuan, Li; Chen-Li, Gan; Ke-Qing, Lu

2008-01-01

We study the competition between dispersion and absorption of doubly-dressed four-wave mixing (DDFWM) and dressed six-wave mixing. In the case of weak coupling fields limit, we find DDFWM signal is affected by destructive interference between four-wave mixing(FWM) and six-wave mixing as well as constructive interference between FWM and eight-wave mixing. By analysing the difference between two kinds of doubly dressing mechanisms (parallel cascade and nested cascade) in this opening five-level system, we can further understand the generated high-order nonlinear optical signal dressed by multi-fields

MARKETING MIX THEORETICAL ASPECTS

OpenAIRE

Margarita Išoraitė

2016-01-01

Aim of article is to analyze marketing mix theoretical aspects. The article discusses that marketing mix is one of the main objectives of the marketing mix elements for setting objectives and marketing budget measures. The importance of each element depends not only on the company and its activities, but also on the competition and time. All marketing elements are interrelated and should be seen in the whole of their actions. Some items may have greater importance than others; it depends main...

Arctic Mixed Layer Dynamics

National Research Council Canada - National Science Library

Morison, James

2003-01-01

.... Over the years we have sought to understand the heat and mass balance of the mixed layer, marginal ice zone processes, the Arctic internal wave and mixing environment, summer and winter leads, and convection...

η'-η-π0 mixing

International Nuclear Information System (INIS)

Bagchi, B.; Lahiri, A.; Niyogi, S.

1990-01-01

We have examined the saturation of anomalous Ward identities by the low-lying pseudoscalars π 0 , η, and η' to determine the sizes of η'-η, π 0 -η, and π 0 -η' mixing angles. The η'-η mixing angle turns out to be about -20 degree which is consistent with the recent findings. Our estimate for the π 0 -η mixing angle shows that it could be bigger than the older value obtained from the ρ-ω mixing, baryon mass splittings, and kaon mass difference

effects of mixed of mixed of mixed alkaline earth oxides in potash

African Journals Online (AJOL)

eobe

Si, P) are network formers, and that materials whose. Nigerian ... made by mixing sand (SiO2), potassium carbonates. (K2Co3) .... The edges of the glass were grounded using ..... surface energies of minerals; theoritical estimate for oxides ...

Mixing properties of quantum systems

International Nuclear Information System (INIS)

Narnhofer, H.; Thirring, W.

1988-01-01

We generalize the classical notion of topological mixing for automorphisms of C * -algebras in two ways. We show that for Galilean invariant Fermi systems the weaker form of mixing is satisfied. With some additional requirement on the range of the interaction we can also demonstrate the stronger mixing property. (Author)

Against Mixed Epistemology

Directory of Open Access Journals (Sweden)

Joe Milburn

2015-05-01

Full Text Available http://dx.doi.org/10.5007/1808-1711.2015v19n2p183 We can call any reductive account of knowledge that appeals to both safety and ability conditions a mixed account of knowledge. Examples of mixed accounts of knowledge include Pritchard’s (2012 Anti-Luck Virtue Epistemology, Kelp’s (2013 Safe-Apt account of knowledge, and Turri’s (2011 Ample belief account of knowledge. Mixed accounts of knowledge are motivated by well-known counterexamples to pure safety and pure ability accounts of knowledge. It is thought that by combining both safety and ability conditions we can give an extensionally adequate reductive account of knowledge. In this paper I argue that the putative counterexamples to pure safety and pure ability accounts of knowledge fail to motivate mixed accounts of knowledge. In particular, I argue that if the putative counterexamples are problematic for safety accounts they are problematic for ability accounts and vice-versa. The reason for this, I argue, is that the safety condition and ability condition should be understood as alternative expressions of the same intuition — that knowledge must come from a reliable source.

A detailed aerosol mixing state model for investigating interactions between mixing state, semivolatile partitioning, and coagulation

OpenAIRE

J. Lu; F. M. Bowman

2010-01-01

A new method for describing externally mixed particles, the Detailed Aerosol Mixing State (DAMS) representation, is presented in this study. This novel method classifies aerosols by both composition and size, using a user-specified mixing criterion to define boundaries between compositional populations. Interactions between aerosol mixing state, semivolatile partitioning, and coagulation are investigated with a Lagrangian box model that incorporates the DAMS approach. Model results predict th...

The Postmodernist Descending the Staircase.

Science.gov (United States)

Paterson, Susan

This paper considers the artistic and literary movement called "Postmodernism." Noting that postmodernism is intellectually grounded in the premise that its discourse must expose positions of privilege and power relations in society, the paper asks of art education, How much has the postmodern condition, a thesis of cultural relativism…

Calculus Student Descending a Staircase.

Science.gov (United States)

Mueller, William

1999-01-01

Common student attitudes toward reform methods are conveyed through the thoughts of a student leaving a multivariable calculus exam and musings range over textbooks, homework, workload, group work, writing, noncomputational problems, instructional problems, instructional styles, and classroom activities. (Author/ASK)

Mixed Methods Research in School Psychology: A Mixed Methods Investigation of Trends in the Literature

Science.gov (United States)

Powell, Heather; Mihalas, Stephanie; Onwuegbuzie, Anthony J.; Suldo, Shannon; Daley, Christine E.

2008-01-01

This article illustrates the utility of mixed methods research (i.e., combining quantitative and qualitative techniques) to the field of school psychology. First, the use of mixed methods approaches in school psychology practice is discussed. Second, the mixed methods research process is described in terms of school psychology research. Third, the…

An Integrating Framework for Mixed Systems

Science.gov (United States)

Coutrix, Céline; Nigay, Laurence

Technological advances in hardware manufacturing led to an extended range of possibilities for designing physical-digital objects involved in a mixed system. Mixed systems can take various forms and include augmented reality, augmented virtuality, and tangible systems. In this very dynamic context, it is difficult to compare existing mixed systems and to systematically explore the design space. Addressing this design problem, this chapter presents a unified point of view on mixed systems by focusing on mixed objects involved in interaction, i.e., hybrid physical-digital objects straddling physical and digital worlds. Our integrating framework is made of two complementary facets of a mixed object: we define intrinsic as well as extrinsic characteristics of an object by considering its role in the interaction. Such characteristics of an object are useful for comparing existing mixed systems at a fine-grain level. The taxonomic power of these characteristics is discussed in the context of existing mixed systems from the literature. Their generative power is illustrated by considering a system, Roam, which we designed and developed.

Continuous precipitation of mineral products: influence of mixing conditions on the co-precipitation of cerium-zirconium mixed oxides

International Nuclear Information System (INIS)

Di Patrizio, Nicolas

2015-01-01

An automated experimental set-up with rapid mixers is used to study the influence of mixing conditions on the co-precipitation of cerium-zirconium mixed oxides. The intensity of mixing is controlled by the inlet flow rates of the reacting solutions. An engulfment model is used to estimate a mixing time from the measurement of a segregation index by the Villermaux-Dushman reaction system. Three geometries of Hartridge Roughton mixers are compared. Mixing performance is better when a separate mixing chamber upstream of a narrower outlet pipe is present. A better mixing decreases the maximal reducibility temperature of the material and increases the crystal strains of the particles calcined at 1100 C. This is probably due to a better homogenization of the particles content. The important incorporation of nitrates in the particle at the outlet of the mixers shows precipitation occurs while the mixing process is not finished. This experimental result was confirmed by numerical simulation and an estimation of sur-saturations during the mixing process. (author)

Low-level radioactive waste, mixed low-level radioactive waste, and biomedical mixed waste

International Nuclear Information System (INIS)

Anon.

1994-01-01

This document describes the proceedings of a workshop entitled: Low-Level Radioactive Waste, Mixed Low-Level Radioactive Waste, and Biomedical Mixed Waste presented by the National Low-Level Waste Management Program at the University of Florida, October 17-19, 1994. The topics covered during the workshop include technical data and practical information regarding the generation, handling, storage and disposal of low-level radioactive and mixed wastes. A description of low-level radioactive waste activities in the United States and the regional compacts is presented

Configuration mixing for spin-isospin modes

International Nuclear Information System (INIS)

Ichimura, Munetake

2005-01-01

Development of theories of configuration mixing is reviewed, concentrating on their application to spin-isospin modes, especially to the Gamow-Teller transitions. This talk is divided into three historical stages, the first order configuration mixing as the first stage, the second order configuration mixing as the second stage, and the delta-isobar-hole mixing as the third stage

Scoping Study of Airlift Circulation Technologies for Supplemental Mixing in Pulse Jet Mixed Vessels

Energy Technology Data Exchange (ETDEWEB)

Schonewill, Philip P. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Berglin, Eric J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Boeringa, Gregory K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Buchmiller, William C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Burns, Carolyn A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Minette, Michael J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2015-04-07

At the request of the U.S. Department of Energy Office of River Protection, Pacific Northwest National Laboratory (PNNL) conducted a scoping study to investigate supplemental technologies for supplying vertical fluid motion and enhanced mixing in Waste Treatment and Immobilization Plant (WTP) vessels designed for high solids processing. The study assumed that the pulse jet mixers adequately mix and shear the bottom portion of a vessel. Given that, the primary function of a supplemental technology should be to provide mixing and shearing in the upper region of a vessel. The objective of the study was to recommend a mixing technology and configuration that could be implemented in the 8-ft test vessel located at Mid-Columbia Engineering (MCE). Several mixing technologies, primarily airlift circulator (ALC) systems, were evaluated in the study. This technical report contains a review of ALC technologies, a description of the PNNL testing and accompanying results, and recommended features of an ALC system for further study.

A detailed aerosol mixing state model for investigating interactions between mixing state, semivolatile partitioning, and coagulation

Directory of Open Access Journals (Sweden)

J. Lu

2010-04-01

Full Text Available A new method for describing externally mixed particles, the Detailed Aerosol Mixing State (DAMS representation, is presented in this study. This novel method classifies aerosols by both composition and size, using a user-specified mixing criterion to define boundaries between compositional populations. Interactions between aerosol mixing state, semivolatile partitioning, and coagulation are investigated with a Lagrangian box model that incorporates the DAMS approach. Model results predict that mixing state affects the amount and types of semivolatile organics that partition to available aerosol phases, causing external mixtures to produce a more size-varying composition than internal mixtures. Both coagulation and condensation contribute to the mixing of emitted particles, producing a collection of multiple compositionally distinct aerosol populations that exists somewhere between the extremes of a strictly external or internal mixture. The selection of mixing criteria has a significant impact on the size and type of individual populations that compose the modeled aerosol mixture. Computational demands for external mixture modeling are significant and can be controlled by limiting the number of aerosol populations used in the model.

Mixing of solids in different mixing devices

Indian Academy of Sciences (India)

INGRID BAUMAN, DUŠKA ´CURI ´C and MATIJA BOBAN ... whose main cause is the difference in particle size, density shape and resilience. ..... Gyebis J, Katai F 1990 Determination and randomness in mixing of particulate solids, Chem.

Probabilistic broadcasting of mixed states

International Nuclear Information System (INIS)

Li Lvjun; Li Lvzhou; Wu Lihua; Zou Xiangfu; Qiu Daowen

2009-01-01

It is well known that the non-broadcasting theorem proved by Barnum et al is a fundamental principle of quantum communication. As we are aware, optimal broadcasting (OB) is the only method to broadcast noncommuting mixed states approximately. In this paper, motivated by the probabilistic cloning of quantum states proposed by Duan and Guo, we propose a new way for broadcasting noncommuting mixed states-probabilistic broadcasting (PB), and we present a sufficient condition for PB of mixed states. To a certain extent, we generalize the probabilistic cloning theorem from pure states to mixed states, and in particular, we generalize the non-broadcasting theorem, since the case that commuting mixed states can be exactly broadcast can be thought of as a special instance of PB where the success ratio is 1. Moreover, we discuss probabilistic local broadcasting (PLB) of separable bipartite states

CFD simulation of crossflow mixing in a rod bundle with mixing blades

International Nuclear Information System (INIS)

In, W. K.

1999-01-01

A CFD model was developed in this study to simulate the crossflow mixing in a 4x4 square array rod bundle caused by ripped-open blades. The central subchannel and adjacent subchannels of one grid span were modeled using flow symmetry. The lateral velocity pattern within the central subchannel, lateral velocity and the turbulence intensity in the rod gap region were predicted by the CFD method, and the predictions were compared with the measurements. The CFD simulation shows a vortex flow around the fuel rod caused by a pair of blades, which is consistent with the experimental results. The CFD predictions of the lateral velocity on the mixing sections show a near symmetric profile, but the measurements present an asymmetric velocity profile leading to an inversion of lateral velocity. The predicted mixing rate between the central subchannel and the adjacent subchannels reasonably agrees with the measured one. The CFD prediction shows a parabolic distribution of the RMS velocity but the measured one shows a rather flat distribution near the blade that develops to a parabolic distribution far downstream (L=29De). The predicted average RMS velocity on a mixing section is also slightly lower than the measured one. This study confirmed that the CFD simulation can present the effect of the ripped-open blades on the crossflow mixing in a rod bundle well

Mercury removal from solid mixed waste

International Nuclear Information System (INIS)

Gates, D.D.; Morrissey, M.; Chava, K.K.; Chao, K.

1994-01-01

The removal of mercury from mixed wastes is an essential step in eliminating the temporary storage of large inventories of mixed waste throughout the Department of Energy (DOE) complex. Currently thermal treatment has been identified as a baseline technology and is being developed as part of the DOE Mixed Waste Integrated Program (MWIP). Since thermal treatment will not be applicable to all mercury containing mixed waste and the removal of mercury prior to thermal treatment may be desirable, laboratory studies have been initiated at Oak Ridge National Laboratory (ORNL) to develop alternative remediation technologies capable of removing mercury from certain mixed waste. This paper describes laboratory investigations of the KI/I 2 leaching processes to determine the applicability of this process to mercury containing solid mixed waste

SPORT MARKETING MIX STRATEGIES

Directory of Open Access Journals (Sweden)

Alexandru Lucian MIHAI

2013-06-01

Full Text Available This paper presents a brief overview of a significant element of the sport marketing management model called the marketing mix. The marketing mix is crucial because it defines the sport business, and much of the sport marketer’s time is spent on various functions within the marketing mix. The marketing mix is the strategic combination of the product, price, place and promotion elements. These elements are typically called the four Ps of marketing. Decisions and strategies for each are important for the marketer. Information for making educated decisions involving the four Ps comes from the marketing research involving primarily the four Cs - consumer, competitor, company and climate. A critical decision and one of the greatest challenges for the sport business is how to strategically combine the four Ps to best satisfy the consumer, meet company objectives, enhance market position, and enhance competitive advantages.

Two-fluid mixing in a microchannel

International Nuclear Information System (INIS)

Liu Yingzheng; Kim, Byoung Jae; Sung, Hyung Jin

2004-01-01

A numerical study of the mixing of two fluids (pure water and a solution of glycerol in water) in a microchannel was carried out. By varying the glycerol content of the glycerol/water solution, the variation in mixing behavior with changes in the difference in the properties of the two fluids (e.g., viscosity, density and diffusivity) was investigated. The mixing phenomena were tested for three micromixers: a squarewave mixer, a three-dimensional serpentine mixer and a staggered herringbone mixer. The governing equations of continuity, momentum and solute mass fraction were solved numerically. To evaluate mixing performance, a criterion index of mixing uniformity was proposed. In the systems considered, the Reynolds number based on averaged properties was Re=1 and 10. For low Reynolds number (Re=1), the mixing performance varied inversely with mass fraction of glycerol due to the dominance of molecular diffusion. The mixing performance deteriorated due to a significant reduction in the residence time of the fluid inside the mixers

Mixed wasted integrated program: Logic diagram

International Nuclear Information System (INIS)

Mayberry, J.; Stelle, S.; O'Brien, M.; Rudin, M.; Ferguson, J.; McFee, J.

1994-01-01

The Mixed Waste Integrated Program Logic Diagram was developed to provide technical alternative for mixed wastes projects for the Office of Technology Development's Mixed Waste Integrated Program (MWIP). Technical solutions in the areas of characterization, treatment, and disposal were matched to a select number of US Department of Energy (DOE) treatability groups represented by waste streams found in the Mixed Waste Inventory Report (MWIR)

Mixed wasted integrated program: Logic diagram

Energy Technology Data Exchange (ETDEWEB)

Mayberry, J.; Stelle, S. [Science Applications International Corp., Idaho Falls, ID (United States); O`Brien, M. [Univ. of Arizona, Tucson, AZ (United States); Rudin, M. [Univ. of Nevada, Las Vegas, NV (United States); Ferguson, J. [Lockheed Idaho Technologies Co., Idaho Falls, ID (United States); McFee, J. [I.T. Corp., Albuquerque, NM (United States)

1994-11-30

The Mixed Waste Integrated Program Logic Diagram was developed to provide technical alternative for mixed wastes projects for the Office of Technology Development`s Mixed Waste Integrated Program (MWIP). Technical solutions in the areas of characterization, treatment, and disposal were matched to a select number of US Department of Energy (DOE) treatability groups represented by waste streams found in the Mixed Waste Inventory Report (MWIR).

Mixed alcohols production from syngas

International Nuclear Information System (INIS)

Stevens, R.R.; Conway, M.M.

1988-01-01

A process is described for selectively producing mixed alcohols from synthesis gas comprising contacting a mixture of hydrogen and carbon monoxide with a catalytic amount of a catalyst containing components of (1) a catalytically active metal of molybdenum or tungsten, in free or combined form; (2) a cocatalytic metal or cobalt or nickel in free or combined form; and (3) a Fischer-Tropsch promoter of an alkali or alkaline earth series metal, in free or combined form; the components combined by dry mixing, mixing as a wet paste, wet impregnation, and then sulfided, the catalyst excluding rhodium, ruthenium and copper, at a pressure of at least about 500 psig and under conditions sufficient to form the mixed alcohols in at least 20 percent CO/sub 2/ free carbon selectivity, the mixed alcohols containing a C/sub 1/ to C/sub 2-5/ alcohol weight ratio of less than about 1:1

Mixing audio concepts, practices and tools

CERN Document Server

Izhaki, Roey

2013-01-01

Your mix can make or break a record, and mixing is an essential catalyst for a record deal. Professional engineers with exceptional mixing skills can earn vast amounts of money and find that they are in demand by the biggest acts. To develop such skills, you need to master both the art and science of mixing. The new edition of this bestselling book offers all you need to know and put into practice in order to improve your mixes. Covering the entire process --from fundamental concepts to advanced techniques -- and offering a multitude of audio samples, tips and tricks, this boo

Mixed methods research in mental health nursing.

Science.gov (United States)

Kettles, A M; Creswell, J W; Zhang, W

2011-08-01

Mixed methods research is becoming more widely used in order to answer research questions and to investigate research problems in mental health and psychiatric nursing. However, two separate literature searches, one in Scotland and one in the USA, revealed that few mental health nursing studies identified mixed methods research in their titles. Many studies used the term 'embedded' but few studies identified in the literature were mixed methods embedded studies. The history, philosophical underpinnings, definition, types of mixed methods research and associated pragmatism are discussed, as well as the need for mixed methods research. Examples of mental health nursing mixed methods research are used to illustrate the different types of mixed methods: convergent parallel, embedded, explanatory and exploratory in their sequential and concurrent combinations. Implementing mixed methods research is also discussed briefly and the problem of identifying mixed methods research in mental and psychiatric nursing are discussed with some possible solutions to the problem proposed. © 2011 Blackwell Publishing.

Characteristic signatures of quantum criticality driven by geometrical frustration.

Science.gov (United States)

Tokiwa, Yoshifumi; Stingl, Christian; Kim, Moo-Sung; Takabatake, Toshiro; Gegenwart, Philipp

2015-04-01

Geometrical frustration describes situations where interactions are incompatible with the lattice geometry and stabilizes exotic phases such as spin liquids. Whether geometrical frustration of magnetic interactions in metals can induce unconventional quantum critical points is an active area of research. We focus on the hexagonal heavy fermion metal CeRhSn, where the Kondo ions are located on distorted kagome planes stacked along the c axis. Low-temperature specific heat, thermal expansion, and magnetic Grüneisen parameter measurements prove a zero-field quantum critical point. The linear thermal expansion, which measures the initial uniaxial pressure derivative of the entropy, displays a striking anisotropy. Critical and noncritical behaviors along and perpendicular to the kagome planes, respectively, prove that quantum criticality is driven be geometrical frustration. We also discovered a spin flop-type metamagnetic crossover. This excludes an itinerant scenario and suggests that quantum criticality is related to local moments in a spin liquid-like state.

Mixed-Media File Systems

NARCIS (Netherlands)

Bosch, H.G.P.

1999-01-01

This thesis addresses the problem of implementing mixed-media storage systems. In this work a mixed-media file system is defined to be a system that stores both conventional (best-effort) file data and real-time continuous-media data. Continuous-media data is usually bulky, and servers storing and

The Mixed language Debate

DEFF Research Database (Denmark)

A range of views on mixed languages and their connections to phenomena such as secret languages, massive borrowing, codeswitching and codemixing, and thier origin.......A range of views on mixed languages and their connections to phenomena such as secret languages, massive borrowing, codeswitching and codemixing, and thier origin....

New Hampshire binder and mix review.

Science.gov (United States)

2012-08-01

This review was initiated to compare relative rut testing and simple performance tests (now known as Asphalt Mix : Performance Tests) for the New Hampshire inch mix with 15% Recycled Asphalt Pavement (RAP). The tested mixes were : made from ...

Mixed Reality Systems

OpenAIRE

Dieter Müller

2009-01-01

Currently one of the most challenging aspects of human computer interaction design is the integration of physical and digital worlds in a single environment. This fusion involves the development of "Mixed Reality Systems”, including various technologies from the domains of augmented and virtual reality. In this paper I will present related concepts and discuss lessons learned from our own research and prototype development. Our recent work involves the use of mixed reality (as opposed to ‘pur...

Mixed waste, preparing for 1996

International Nuclear Information System (INIS)

Duke, D.L.

1995-01-01

The Environmental Protection Agency has recently approved an extension to the enforcement policy for the storage of restricted mixed waste. Under this policy, EPA assigns a reduced enforcement priority to violations of the 40CFR268.50 prohibition on storage of restricted waste. Eligibility for the lower enforcement priority afforded by the policy is subject to specified conditions. The recent extension is for a two year period, and agency personnel have advised that it may be difficult to extend the enforcement policy again. This paper reviews anticipated changes in mixed waste treatment and disposal capabilities. Types of mixed waste that may be generated, or in storage, at commercial nuclear power plants are identified. This information is evaluated to determine if the two year extension in the storage enforcement policy will be adequate for the nuclear power industry to treat or dispose of the mixed waste inventories that are identified, and if not, where potential problem areas may reside. Recommendations are then made on mixed waste management strategies

Use of emulsion for warm mix asphalt

Directory of Open Access Journals (Sweden)

Mahabir Panda

2017-06-01

Full Text Available Due to increase in energy costs and emission problems in hot mix asphalt usually used, it brought a great interest to the researchers to develop the warm mix technology for pavement constructions. Commonly known as warm mix asphalt (WMA, it is a typical method in the bituminous paving technology, which allows production and placement of bituminous mixes at lower temperatures than that used for hot mix asphalt (HMA. The WMA involves an environmental friendly production process that utilises organic additives, chemical additives and water based technologies. The organic and chemical additives are normally very costly and still involve certain amount of environmental issues. These factors motivated the authors to take up this technology using simple, environment friendly and somewhat cost effective procedure. In this study, an attempt has been made to prepare warm mixes by first pre-coating the aggregates with medium setting bitumen emulsion (MS and then mixing the semi-coated aggregates with VG 30 bitumen at a lower temperature than normally required. After a number of trials it was observed that mostly three mixing temperatures, namely temperatures 110 °C, 120 °C and 130 °C were appropriate to form the bituminous mixes with satisfactory homogeneity and consistency and as such were maintained throughout this study. Marshall samples for paving mixes were prepared using this procedure for dense bituminous macadam (DBM gradings as per the specifications of Ministry of Road Transport and Highways (MORTH and subsequently Marshall properties of the resultant mixes were studied with the main objective of deciding the different parameters that were considered for development of appropriate warm mix asphalt. In this study it has been observed that out of three mixing temperatures tried, the mixes prepared at 120 °C with bitumen-emulsion composition of 80B:20E for DBM warm mix, offer highest Marshall stability and highest indirect tensile strength

Company Marketing Mix

OpenAIRE

Vyroubalová, Klára

2015-01-01

Tématem této bakalářské práce je ,,Marketingový mix společnosti SKITECH, s. r. o.“ Práce se zabývá vypracováním marketingového mixu a navrţením lyţařských produktů skiareálu. Předpokladem pro vytvoření marketingového mixu je provedení SWOT analýzy a analýzy konkurence. Na základě těchto výsledků budou stanoveny vize a cíle skiareálu a návrhy jednotlivých produktů. V závěrečné části je aplikován marketingový mix na konkrétní produkt. This thesis deals with the marketing mix of the SKITECH c...

Mixed features in patients with a major depressive episode: the BRIDGE-II-MIX study.

Science.gov (United States)

Perugi, Giulio; Angst, Jules; Azorin, Jean-Michel; Bowden, Charles L; Mosolov, Sergey; Reis, Joao; Vieta, Eduard; Young, Allan H

2015-03-01

To estimate the frequency of mixed states in patients diagnosed with major depressive episode (MDE) according to conceptually different definitions and to compare their clinical validity. This multicenter, multinational cross-sectional Bipolar Disorders: Improving Diagnosis, Guidance and Education (BRIDGE)-II-MIX study enrolled 2,811 adult patients experiencing an MDE. Data were collected per protocol on sociodemographic variables, current and past psychiatric symptoms, and clinical variables that are risk factors for bipolar disorder. The frequency of mixed features was determined by applying both DSM-5 criteria and a priori described Research-Based Diagnostic Criteria (RBDC). Clinical variables associated with mixed features were assessed using logistic regression. Overall, 212 patients (7.5%) fulfilled DSM-5 criteria for MDE with mixed features (DSM-5-MXS), and 818 patients (29.1%) fulfilled diagnostic criteria for a predefined RBDC depressive mixed state (RBDC-MXS). The most frequent manic/hypomanic symptoms were irritable mood (32.6%), emotional/mood lability (29.8%), distractibility (24.4%), psychomotor agitation (16.1%), impulsivity (14.5%), aggression (14.2%), racing thoughts (11.8%), and pressure to keep talking (11.4%). Euphoria (4.6%), grandiosity (3.7%), and hypersexuality (2.6%) were less represented. In multivariate logistic regression analysis, RBDC-MXS was associated with the largest number of variables including diagnosis of bipolar disorder, family history of mania, lifetime suicide attempts, duration of the current episode > 1 month, atypical features, early onset, history of antidepressant-induced mania/hypomania, and lifetime comorbidity with anxiety, alcohol and substance use disorders, attention-deficit/hyperactivity disorder, and borderline personality disorder. Depressive mixed state, defined as the presence of 3 or more manic/hypomanic features, was present in around one-third of patients experiencing an MDE. The valid symptom, illness

AECL's mixed waste management program

International Nuclear Information System (INIS)

Peori, R.; Hulley, V.

2006-01-01

Every nuclear facility has it, they wish that they didn't but they have generated and do possess m ixed waste , and until now there has been no permanent disposition option; it has been for the most been simply maintained in interim storage. The nuclear industry has been responsibly developing permanent solutions for solid radioactive waste for over fifty years and for non-radioactive, chemically hazardous waste, for the last twenty years. Mixed waste (radioactive and chemically hazardous waste) however, because of its special, duo-hazard nature, has been a continuing challenge. The Hazardous Waste and Segregation Program (HW and SP) at AECL's CRL has, over the past ten years, been developing solutions to deal with their own in-house mixed waste and, as a result, have developed solutions that they would like to share with other generators within the nuclear industry. The main aim of this paper is to document and describe the early development of the solutions for both aqueous and organic liquid wastes and to advertise to other generators of this waste type how these solutions can be implemented to solve their mixed waste problems. Atomic Energy of Canada Limited (AECL) and in particular, CRL has been satisfactorily disposing of mixed waste for the last seven years. CRL has developed a program that not only disposes of mixed waste, but offers a full service mixed waste management program to customers within Canada (that could eventually include U.S. sites as well) that has developed the experience and expertise to evaluate and optimize current practices, dispose of legacy inventories, and set up an efficient segregation system to reduce and effectively manage, both the volumes and expense of, the ongoing generation of mixed waste for all generators of mixed waste. (author)

Mixed-linker zeolitic imidazolate framework mixed-matrix membranes for aggressive CO2 separation from natural gas

KAUST Repository

Thompson, Joshua A.

2014-07-01

Zeolitic imidazolate framework (ZIF) materials are a promising subclass of metal-organic frameworks (MOF) for gas separations. However, due to the deleterious effects of gate-opening phenomena associated with organic linker rotation near the limiting pore apertures of ZIFs, there have been few demonstrations of improved gas separation properties over pure polymer membranes when utilizing ZIF materials in composite membranes for CO2-based gas separations. Here, we report a study of composite ZIF/polymer membranes, containing mixed-linker ZIF materials with ZIF-8 crystal topologies but composed of different organic linker compositions. Characterization of the mixed-linker ZIFs shows that the mixed linker approach offers control over the porosity and pore size distribution of the materials, as determined from nitrogen physisorption and Horváth-Kawazoe analysis. Single gas permeation measurements on mixed-matrix membranes reveal that inclusion of mixed-linker ZIFs yields membranes with better ideal CO2/CH4 selectivity than membranes containing ZIF-8. This improvement is shown to likely occur from enhancement in the diffusion selectivity of the membranes associated with controlling the pore size distribution of the ZIF filler. Mixed-gas permeation experiments show that membranes with mixed-linker ZIFs display an effective plasticization resistance that is not typical of the pure polymeric matrix. Overall, we demonstrate that mixed-linker ZIFs can improve the gas separation properties in composite membranes and may be applicable to aggressive CO2 concentrations in natural gas feeds. © 2013 Elsevier Inc. All rights reserved.

Mixed-Methods Research Methodologies

Science.gov (United States)

Terrell, Steven R.

2012-01-01

Mixed-Method studies have emerged from the paradigm wars between qualitative and quantitative research approaches to become a widely used mode of inquiry. Depending on choices made across four dimensions, mixed-methods can provide an investigator with many design choices which involve a range of sequential and concurrent strategies. Defining…

Parity mixing

International Nuclear Information System (INIS)

Adelberger, E.G.

1975-01-01

The field of parity mixing in light nuclei bears upon one of the exciting and active problems of physics--the nature of the fundamental weak interaction. It is also a subject where polarization techniques play a very important role. Weak interaction theory is first reviewed to motivate the parity mixing experiments. Two very attractive systems are discussed where the nuclear physics is so beautifully simple that the experimental observation of tiny effects directly measures parity violating (PV) nuclear matrix elements which are quite sensitive to the form of the basic weak interaction. Since the measurement of very small analyzing powers and polarizations may be of general interest to this conference, some discussion is devoted to experimental techniques

Microfluidic mixing through oscillatory transverse perturbations

Science.gov (United States)

Wu, J. W.; Xia, H. M.; Zhang, Y. Y.; Zhu, P.

2018-05-01

Fluid mixing in miniaturized fluidic devices is a challenging task. In this work, the mixing enhancement through oscillatory transverse perturbations coupling with divergent circular chambers is studied. To simplify the design, an autonomous microfluidic oscillator is used to produce the oscillatory flow. It is then applied to four side-channels that intersect with a central channel of constant flow. The mixing performance is tested at high fluid viscosities of up to 16 cP. Results show that the oscillatory flow can cause strong transverse perturbations which effectively enhance the mixing. The influence of a fluidic capacitor in the central channel is also examined, which at low viscosities can intensify the perturbations and further improve the mixing.

1.5. The concrete mix properties

International Nuclear Information System (INIS)

Saidov, D.Kh.

2011-01-01

Different properties of concrete mix, including connectivity, mobility and water demand were considered in this work. The steps of water demand of concrete mix obtained from Portland cement, sand and gravel are presented in this work. The classification of concrete mixes is presented as well.

Learning-based 3D surface optimization from medical image reconstruction

Science.gov (United States)

Wei, Mingqiang; Wang, Jun; Guo, Xianglin; Wu, Huisi; Xie, Haoran; Wang, Fu Lee; Qin, Jing

2018-04-01

Mesh optimization has been studied from the graphical point of view: It often focuses on 3D surfaces obtained by optical and laser scanners. This is despite the fact that isosurfaced meshes of medical image reconstruction suffer from both staircases and noise: Isotropic filters lead to shape distortion, while anisotropic ones maintain pseudo-features. We present a data-driven method for automatically removing these medical artifacts while not introducing additional ones. We consider mesh optimization as a combination of vertex filtering and facet filtering in two stages: Offline training and runtime optimization. In specific, we first detect staircases based on the scanning direction of CT/MRI scanners, and design a staircase-sensitive Laplacian filter (vertex-based) to remove them; and then design a unilateral filtered facet normal descriptor (uFND) for measuring the geometry features around each facet of a given mesh, and learn the regression functions from a set of medical meshes and their high-resolution reference counterparts for mapping the uFNDs to the facet normals of the reference meshes (facet-based). At runtime, we first perform staircase-sensitive Laplacian filter on an input MC (Marching Cubes) mesh, and then filter the mesh facet normal field using the learned regression functions, and finally deform it to match the new normal field for obtaining a compact approximation of the high-resolution reference model. Tests show that our algorithm achieves higher quality results than previous approaches regarding surface smoothness and surface accuracy.

New flash mixing

International Nuclear Information System (INIS)

Sackmann, I.

1980-01-01

It was found that even for stars evolved away from the red giant branch, a new mixing of nucleo-synthesis products from the hydrogen-burning shells into surface layers was possible, from the penetration of the contaminated intershell region with the H- and He-ionization convection zones. This is due to the helium shell flash driving an immense expansion of an inner carbon pocket, namely, by a factor of 12,000 in radius, a drop in density of about 10 12 , and a cooling of inner pockets normally near 10 8 K to 23,000 K. The surface would be enriched in carbon ( 12 C), helium ( 4 He), and s-process elements, but not significantly in nitrogen ( 14 N), oxygen ( 16 O), or the isotope 13 C. This new type of mixing might provide the missing clue for FG Sagittae. Such a mixing had been suggested by the observations of FG Sagittae, but had been unexplainable by theory up to now

Mixing of solids

CERN Document Server

Weinekötter, Ralf

2000-01-01

This book is a welcome edition to the Particle Technology Series, formerly Powder Technology Series. It is the second book in the series which describes powder mixing and we make no excuses for that. The topic of powder mixing is fundamental to powder technology and is one which always aroses interest. That will not change. As powder products become more complex they will pose new mixing problems. The solutions lie in the intelligent use of equipment, an understanding of powder properties and a good knowledge of basic statistics. The authors of this book have presented those three ingredients with great clarity. The book is based on long experience and deep thought, I have enjoyed reading it and am pleased to recommend it. Delft University of Technology, NL-Delft, July 1999 Brian Scarlett, Series Editor IX VII Foreword to the English Edition In response to many enquiries from industrial organisations and institutes involved with the technology of processing bulk materials, we are pleased to present the Englis...

New generation HMA mix designs : accelerated pavement testing of a type C mix with the ALF machine.

Science.gov (United States)

2012-09-01

Recent changes to the Texas hot-mix asphalt (HMA) mix-design procedures, such as the adaption of the higher-stiffer performance-grade asphalt-binder grades and the Hamburg test, have ensured that the mixes that are routinely used on Texas highways ar...

Pragmatism, Evidence, and Mixed Methods Evaluation

Science.gov (United States)

Hall, Jori N.

2013-01-01

Mixed methods evaluation has a long-standing history of enhancing the credibility of evaluation findings. However, using mixed methods in a utilitarian way implicitly emphasizes convenience over engaging with its philosophical underpinnings (Denscombe, 2008). Because of this, some mixed methods evaluators and social science researchers have been…

ERIC/EECE Report. Mixed Age Grouping.

Science.gov (United States)

Cesarone, Bernard

1995-01-01

Summarizes eight recent ERIC documents and seven journal articles on mixed-age grouping. Includes discussions of teaching in the multiage classroom, Kentucky's Primary Program, developmentally appropriate practices in the primary grades, thematic instruction, attitudes toward mixed-age grouping, and questions and answers about mixed-age grouping.…

Mixed labelling in multitarget particle filtering

NARCIS (Netherlands)

Boers, Y.; Sviestins, Egils; Driessen, Hans

2010-01-01

The so-called mixed labelling problem inherent to a joint state multitarget particle filter implementation is treated. The mixed labelling problem would be prohibitive for track extraction from a joint state multitarget particle filter. It is shown, using the theory of Markov chains, that the mixed

Generic evolution of mixing in heterogeneous media

Science.gov (United States)

De Dreuzy, J.; Carrera, J.; Dentz, M.; Le Borgne, T.

2011-12-01

Mixing in heterogeneous media results from the competition bewteen flow fluctuations and local scale diffusion. Flow fluctuations quickly create concentration contrasts and thus heterogeneity of the concentration field, which is slowly homogenized by local scale diffusion. Mixing first deviates from Gaussian mixing, which represents the potential mixing induced by spreading before approaching it. This deviation fundamentally expresses the evolution of the interaction between spreading and local scale diffusion. We characterize it by the ratio γ of the non-Gaussian to the Gaussian mixing states. We define the Gaussian mixing state as the integrated squared concentration of the Gaussian plume that has the same longitudinal dispersion as the real plume. The non-Gaussian mixing state is the difference between the overall mixing state defined as the integrated squared concentration and the Gaussian mixing state. The main advantage of this definition is to use the full knowledge previously acquired on dispersion for characterizing mixing even when the solute concentration field is highly non Gaussian. Using high precision numerical simulations, we show that γ quickly increases, peaks and slowly decreases. γ can be derived from two scales characterizing spreading and local mixing, at least for large flux-weighted solute injection conditions into classically log-normal Gaussian correlated permeability fields. The spreading scale is directly related to the longitudinal dispersion. The local mixing scale is the largest scale over which solute concentrations can be considered locally uniform. More generally, beyond the characteristics of its maximum, γ turns out to have a highly generic scaling form. Its fast increase and slow decrease depend neither on the heterogeneity level, nor on the ratio of diffusion to advection, nor on the injection conditions. They might even not depend on the particularities of the flow fields as the same generic features also prevail for

Mixed methods for telehealth research.

Science.gov (United States)

Caffery, Liam J; Martin-Khan, Melinda; Wade, Victoria

2017-10-01

Mixed methods research is important to health services research because the integrated qualitative and quantitative investigation can give a more comprehensive understanding of complex interventions such as telehealth than can a single-method study. Further, mixed methods research is applicable to translational research and program evaluation. Study designs relevant to telehealth research are described and supported by examples. Quality assessment tools, frameworks to assist in the reporting and review of mixed methods research, and related methodologies are also discussed.

Charm mixing at LHCb

CERN Document Server

Di Canto, Angelo

2013-01-01

We report a measurement of the time-dependent ratio of $D^0\\to K^+\\pi^-$ to $D^0\\to K^-\\pi^+$ decay rates in $D^{*+}$-tagged events using 1.0\\,fb$^{-1}$ of integrated luminosity recorded by the LHCb experiment. We measure the mixing parameters $x'^2=(-0.9\\pm1.3)\\times10^{-4}$, $y'=(7.2\\pm2.4)\\times10^{-3}$ and the ratio of doubly-Cabibbo-suppressed to Cabibbo-favored decay rates $R_D=(3.52\\pm0.15)\\times10^{-3}$. The result excludes the no-mixing hypothesis with a probability corresponding to 9.1 standard deviations and represents the first observation of charm mixing from a single measurement

Temperature-dependent ion beam mixing

International Nuclear Information System (INIS)

Rehn, L.E.; Alexander, D.E.

1993-08-01

Recent work on enhanced interdiffusion rates during ion-beam mixing at elevated temperatures is reviewed. As discussed previously, expected increase in ion-beam mixing rates due to 'radiation-enhanced diffusion' (RED), i.e. the free migration of isolated vacancy and interstitial defects, is well documented in single-crystal specimens in the range of 0.4 to 0.6 of absolute melting temperature. In contrast, the increase often observed at somewhat lower temperatures during ion-beam mixing of polycrystalline specimens is not well understood. However, sufficient evidence is available to show that this increase reflects intracascade enhancement of a thermally-activated process that also occurs without irradiation. Recent evidence is presented which suggests that this process is Diffusion-induced Grain-Boundary Migration (DIGM). An important complementary conclusion is that because ion-beam mixing in single-crystal specimens exhibits no significant temperature dependence below that of RED, models that invoke only irradiation-specific phenomena, e.g., cascade-overlap, thermal-spikes, or liquid-diffusion, and hence which predict no difference in mixing behavior between single- or poly-crystalline specimens, cannot account for the existing results

Age-dependent mixing of deep-sea sediments

International Nuclear Information System (INIS)

Smith, C.R.; Maggaard, L.; Pope, R.H.; DeMaster, D.J.

1993-01-01

Rates of bioturbation measured in deep-sea sediments commonly are tracer dependent; in particular, shorter lived radiotracers (such as 234 Th) often yield markedly higher diffusive mixing coefficients than their longer-lived counterparts (e.g., 210 Pb). At a single station in the 1,240-m deep Santa Catalina Basin, the authors document a strong negative correlation between bioturbation rate and tracer half-life. Sediment profiles of 234 Th (half-life = 24 days) yield an average mixing coefficient (60 cm 2 y -1 ) two orders of magnitude greater than that for 210 Pb (half-life = 22 y, mean mixing coefficient = 0.4 cm 2 y -1 ). A similar negative relationship between mixing rate and tracer time scale is observed at thirteen other deep-sea sites in which multiple radiotracers have been used to assess diffusive mixing rates. This relationship holds across a variety of radiotracer types and time scales. The authors hypothesize that this negative relationship results from age-dependent mixing, a process in which recently sedimented, food-rich particles are ingested and mixed at higher rates by deposit feeders than are older, food-poor particles. Results from an age-dependent mixing model demonstrate that this process indeed can yield the bioturbation-rate vs. tracer-time-scale correlations observed in deep-sea sediments. Field data on mixing rates of recently sedimented particles, as well as the radiotracer activity of deep-sea deposit feeders, provide strong support for the age-dependent mixing model. The presence of age-dependent mixing in deep-sea sediments may have major implications for diagenetic modeling, requiring a match between the characteristic time scales of mixing tracers and modeled reactants. 102 refs., 6 figs., 5 tabs

Cornell Mixing Zone Expert System

Science.gov (United States)

This page provides an overview Cornell Mixing Zone Expert System water quality modeling and decision support system designed for environmental impact assessment of mixing zones resulting from wastewater discharge from point sources

Mixed quantization dimensions of self-similar measures

International Nuclear Information System (INIS)

Dai Meifeng; Wang Xiaoli; Chen Dandan

2012-01-01

Highlights: ► We define the mixed quantization dimension of finitely many measures. ► Formula of mixed quantization dimensions of self-similar measures is given. ► Illustrate the behavior of mixed quantization dimension as a function of order. - Abstract: Classical multifractal analysis studies the local scaling behaviors of a single measure. However recently mixed multifractal has generated interest. The purpose of this paper is some results about the mixed quantization dimensions of self-similar measures.

7 CFR 51.2112 - Mixed varieties.

Science.gov (United States)

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Mixed varieties. 51.2112 Section 51.2112 Agriculture... FRESH FRUITS, VEGETABLES AND OTHER PRODUCTS 1,2 (INSPECTION, CERTIFICATION, AND STANDARDS) United States Standards for Grades of Shelled Almonds Mixed Varieties § 51.2112 Mixed varieties. Any lot of shelled...

How to measure time preferences: An experimental comparison of three methods

Directory of Open Access Journals (Sweden)

David J. Hardisty

2013-05-01

Full Text Available In two studies, time preferences for financial gains and losses at delays of up to 50 years were elicited using three different methods: matching, fixed-sequence choice titration, and a dynamic ``staircase'' choice method. Matching was found to create fewer demand characteristics and to produce better fits with the hyperbolic model of discounting. The choice-based measures better predicted real-world outcomes such as smoking and payment of credit card debt. No consistent advantages were found for the dynamic staircase method over fixed-sequence titration.

29 CFR 1614.302 - Mixed case complaints.

Science.gov (United States)

2010-07-01

... 29 Labor 4 2010-07-01 2010-07-01 false Mixed case complaints. 1614.302 Section 1614.302 Labor... EMPLOYMENT OPPORTUNITY Related Processes § 1614.302 Mixed case complaints. (a) Definitions—(1) Mixed case complaint. A mixed case complaint is a complaint of employment discrimination filed with a federal agency...

Solving the Single-Sink, Fixed-Charge, Multiple-Choice Transportation Problem by Dynamic Programming

DEFF Research Database (Denmark)

Christensen, Tue; Andersen, Kim Allan; Klose, Andreas

2013-01-01

This paper considers a minimum-cost network flow problem in a bipartite graph with a single sink. The transportation costs exhibit a staircase cost structure because such types of transportation cost functions are often found in practice. We present a dynamic programming algorithm for solving...... this so-called single-sink, fixed-charge, multiple-choice transportation problem exactly. The method exploits heuristics and lower bounds to peg binary variables, improve bounds on flow variables, and reduce the state-space variable. In this way, the dynamic programming method is able to solve large...... instances with up to 10,000 nodes and 10 different transportation modes in a few seconds, much less time than required by a widely used mixed-integer programming solver and other methods proposed in the literature for this problem....

Lp-mixed affine surface area

Science.gov (United States)

Wang, Weidong; Leng, Gangsong

2007-11-01

According to the three notions of mixed affine surface area, Lp-affine surface area and Lp-mixed affine surface area proposed by Lutwak, in this article, we give the concept of ith Lp-mixed affine surface area such that the first and second notions of Lutwak are its special cases. Further, some Lutwak's results are extended associated with this concept. Besides, applying this concept, we establish an inequality for the volumes and dual quermassintegrals of a class of star bodies.

Qualitative Approaches to Mixed Methods Practice

Science.gov (United States)

Hesse-Biber, Sharlene

2010-01-01

This article discusses how methodological practices can shape and limit how mixed methods is practiced and makes visible the current methodological assumptions embedded in mixed methods practice that can shut down a range of social inquiry. The article argues that there is a "methodological orthodoxy" in how mixed methods is practiced…

The fragrance mix and its constituents

DEFF Research Database (Denmark)

Johansen, J D; Menné, T

1995-01-01

Results from 14 years of patch testing with the fragrance mix and its constituents are reviewed. From 1979-1992, 8215 consecutive patients were patch tested with the fragrance mix and 449 (5.5%) had a positive reaction. An increase in the frequency of reactions to fragrance mix was seen from the ...

Entropy of Mixing of Distinguishable Particles

Science.gov (United States)

Kozliak, Evguenii I.

2014-01-01

The molar entropy of mixing yields values that depend only on the number of mixing components rather than on their chemical nature. To explain this phenomenon using the logic of chemistry, this article considers mixing of distinguishable particles, thus complementing the well-known approach developed for nondistinguishable particles, for example,…

12 CFR 268.302 - Mixed case complaints.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 3 2010-01-01 2010-01-01 false Mixed case complaints. 268.302 Section 268.302... RULES REGARDING EQUAL OPPORTUNITY Related Processes § 268.302 Mixed case complaints. A mixed case... discrimination or it may contain additional allegations that the MSPB has jurisdiction to address. A mixed case...

Mixed Methods Research: The "Thing-ness" Problem.

Science.gov (United States)

Hesse-Biber, Sharlene

2015-06-01

Contemporary mixed methods research (MMR) veers away from a "loosely bounded" to a "bounded" concept that has important negative implications for how qualitatively driven mixed methods approaches are positioned in the field of mixed methods and overall innovation in the praxis of MMR. I deploy the concept of reification defined as taking an object/abstraction and treating it as if it were real such that it takes on the quality of "thing-ness," having a concrete independent existence. I argue that the contemporary reification of mixed methods as a "thing" is fueled by three interrelated factors: (a) the growing formalization of mixed methods as design, (b) the unexamined belief in the "synergy" of mixed methods and, (c) the deployment of a "practical pragmatism" as the "philosophical partner" for mixed methods inquiry. © The Author(s) 2015.

Liquid metal degassing in electromagnetic mixing

Energy Technology Data Exchange (ETDEWEB)

Pakhomov, A I; EHL' -FAVAKHRI, KAMAL' -ABD-RABU MOKHAMED [LENINGRADSKIJ POLITEKHNICHESKIJ INST. (USSR)

1977-01-01

Experimental results for laboratory and industrial conditions are presented showing the favourable effect of electromagnetic mixing on hot metal degassing process. It has been found that the intensity and duration of the mixing process increase with the degree of iron and steel degassing. Initiation of cavitation phenomena during hot metal electromagnetic mixing is intensified because of the presence of alien inclusions in the metal reducing the tensile strength of the liquid metal. This is the most substantial factor contributing to the gas content in the process of electromagnetic mixing.

Warm mix asphalt : final report.

Science.gov (United States)

2014-11-01

The performance of pavements constructed using warm mix asphalt (WMA) technology were : compared to the performance of conventional hot mix asphalt (HMA) pavements placed on the : same project. Measurements of friction resistance, rutting/wear, ride ...

Mixing of III-V compound semiconductor superlattices

International Nuclear Information System (INIS)

Mei, Ping.

1989-01-01

In this work, the methods as well as mechanisms of III-V compound superlattice mixing are discussed, with particular attention on the AlGaAs based superlattice system. Comparative studies of ion-induced mixing showed two distinct effects resulting from ion implantation followed by a thermal anneal; i.e. collisional mixing and impurity induced mixing. It was found that Ga and As ion induced mixing are mainly due to the collisional effect, where the extent of the mixing can be estimated theoretically, with the parameters of ion mass, incident energy and the implant dose. The impurity effect was dominant for Si, Ge, Be, Zn and Te. Quantitative studies of impurity induced mixing have been conducted on samples doped with Si or Te during the growth process. It was discovered that Si induced AlGaAs superlattice mixing yielded an activation energy of approximately 4 eV for the Al diffusion coefficient with a high power law dependence of the prefactor on the Si concentration. In the Te doped AlGaAs superlattice the Al diffusion coefficient exhibited an activation energy of ∼3.0 eV, with a prefactor approximately proportional to the Te concentration. These results are of importance in examining the current diffusion models. Zn and Si induced InP/InGaAs superlattice mixing are examined. It was found that Zn predominantly induces cation interdiffusion, while Si induces comparable cation and anion interdiffusion. In addition, widely dispersed Zn rich islands form with Zn residing in the InP layers in the form of Zn 3 P 2 . With unstrained starting material, the layer bandgap disparity increases due to mixing induced strain, while in the Si diffused sample the mixed region would be expected to exhibit bandgaps intermediate between those of the original layers. Semiconductor superlattice mixing shows technological potential for optoelectronic device fabrication

Mixed Reality Systems

Directory of Open Access Journals (Sweden)

Dieter Müller

2009-11-01

Full Text Available Currently one of the most challenging aspects of human computer interaction design is the integration of physical and digital worlds in a single environment. This fusion involves the development of "Mixed Reality Systems”, including various technologies from the domains of augmented and virtual reality. In this paper I will present related concepts and discuss lessons learned from our own research and prototype development. Our recent work involves the use of mixed reality (as opposed to ‘pure’ virtual reality techniques to support seamless collaborative work between remote and hands-on laboratories.

Sarcomere length-dependence of activity-dependent twitch potentiation in mouse skeletal muscle

Directory of Open Access Journals (Sweden)

MacIntosh Brian R

2002-12-01

Full Text Available Abstract Background It has been reported that potentiation of a skeletal muscle twitch response is proportional to muscle length with a negative slope during staircase, and a positive slope during posttetanic potentiation. This study was done to directly compare staircase and posttetanic responses with measurement of sarcomere length to compare their length-dependence. Methods Mouse extensor digitorum longus (EDL muscles were dissected to small bundles of fibers, which permit measurement of sarcomere length (SL, by laser diffraction. In vitro fixed-end contractions of EDL fiber bundles were elicited at 22°C and 35°C at sarcomere lengths ranging from 2.35 μm to 3.85 μm. Twitch contractions were assessed before and after 1.5 s of 75 Hz stimulation at 22°C or during 10 s of 10 Hz stimulation at 22°C or 35°C. Results Staircase potentiation was greater at 35°C than 22°C, and the relative magnitude of the twitch contraction (Pt*/Pt was proportional to sarcomere length with a negative slope, over the range 2.3 μm – 3.7 μm. Linear regression yielded the following: Pt*/Pt = -0.59·SL+3.27 (r2 = 0.74; Pt*/Pt = -0.39·SL+2.34 (r2 = 0.48; and Pt*/Pt = -0.50·SL+2.45 (r2 = 0.80 for staircase at 35°C, and 22°C and posttetanic response respectively. Posttetanic depression rather than potentiation was present at long SL. This indicates that there may be two processes operating in these muscles to modulate the force: one that enhances and a second that depresses the force. Either or both of these processes may have a length-dependence of its mechanism. Conclusion There is no evidence that posttetanic potentiation is fundamentally different from staircase in these muscles.

Integration i ’mixed methods’ forskning

DEFF Research Database (Denmark)

Frederiksen, Morten

2013-01-01

Udviklingen af mixed methods forskning som en selvstændig forskningstradition er primært sket gennem udviklingen af mixed methods design. Denne artikel argumenterer for, at design-tilgangen bør suppleres med et mere overordnet fokus på hvordan de adskilte dele af mixed methods projekter integreres...... til et hele. Med udgangspunkt i en analyse af integrationsbegrebet i mixed methods litteraturen foreslås en klassifikation af seks integrationsformer: teori-, design-, metode-, data-, analyse- og fortolkningsintegration. Hver af disse beskriver en måde at skabe meningsfulde, håndgribelige relationer...... mellem undersøgelsens dele. Med udgangspunkt i denne klassifikation undersøges anvendeligheden af integrationsbegrebet gennem en analyse af tre meget forskellige traditioner for mixed methods forskning: metodetriangulering, pragmatistisk designoptimering og teori/metode-integration. På baggrund af denne...

Moments, Mixed Methods, and Paradigm Dialogs

Science.gov (United States)

Denzin, Norman K.

2010-01-01

I reread the 50-year-old history of the qualitative inquiry that calls for triangulation and mixed methods. I briefly visit the disputes within the mixed methods community asking how did we get to where we are today, the period of mixed-multiple-methods advocacy, and Teddlie and Tashakkori's third methodological moment. (Contains 10 notes.)

Chlorophyll modulation of mixed layer thermodynamics in a mixed ...

Indian Academy of Sciences (India)

M. Senthilkumar (Newgen Imaging) 1461 1996 Oct 15 13:05:22

in a mixed-layer isopycnal General Circulation Model – An ... three dimensional ocean circulation theory combined with solar radiation transfer process. 1. .... temperature decrease compared with simulation without chlorophyll (bottom panel).

European Mixed Forests: definition and research perspectives

Directory of Open Access Journals (Sweden)

Andres Bravo-Oviedo

2014-12-01

Full Text Available Aim of study: We aim at (i developing a reference definition of mixed forests in order to harmonize comparative research in mixed forests and (ii review the research perspectives in mixed forests.Area of study: The definition is developed in Europe but can be tested worldwide.Material and Methods: Review of existent definitions of mixed forests based and literature review encompassing dynamics, management and economic valuation of mixed forests.Main results: A mixed forest is defined as a forest unit, excluding linear formations, where at least two tree species coexist at any developmental stage, sharing common resources (light, water, and/or soil nutrients. The presence of each of the component species is normally quantified as a proportion of the number of stems or of basal area, although volume, biomass or canopy cover as well as proportions by occupied stand area may be used for specific objectives. A variety of structures and patterns of mixtures can occur, and the interactions between the component species and their relative proportions may change over time.The research perspectives identified are (i species interactions and responses to hazards, (ii the concept of maximum density in mixed forests, (iii conversion of monocultures to mixed-species forest and (iv economic valuation of ecosystem services provided by mixed forests.Research highlights: The definition is considered a high-level one which encompasses previous attempts to define mixed forests. Current fields of research indicate that gradient studies, experimental design approaches, and model simulations are key topics providing new research opportunities.Keywords: COST Action; EuMIXFOR; mixed-species forests; admixtures of species.

Managing a mixed waste program

International Nuclear Information System (INIS)

Koch, J.D.

1994-01-01

IT Corporation operates an analytical laboratory in St. Louis capable of analyzing environmental samples that are contaminated with both chemical and radioactive materials. Wastes generated during these analyses are hazardous in nature; some are listed wastes others exhibit characteristic hazards. When the original samples contain significant quantities of radioactive material, the waste must be treated as a mixed waste. A plan was written to document the waste management program describing the management of hazardous, radioactive and mixed wastes. This presentation summarizes the methods employed by the St. Louis facility to reduce personnel exposures to the hazardous materials, minimize the volume of mixed waste and treat the materials prior to disposal. The procedures that are used and the effectiveness of each procedure will also be discussed. Some of the lessons that have been learned while dealing with mixed wastes will be presented as well as the solutions that were applied. This program has been effective in reducing the volume of mixed waste that is generated. The management program also serves as a method to manage the costs of the waste disposal program by effectively segregating the different wastes that are generated

Unambiguous discrimination of mixed quantum states

International Nuclear Information System (INIS)

Zhang Chi; Feng Yuan; Ying Mingsheng

2006-01-01

The problem of unambiguous discrimination between mixed quantum states is addressed by isolating the part of each mixed state which has no contribution to discrimination and by employing the strategy of set discrimination of pure states. A necessary and sufficient condition of unambiguous mixed state discrimination is presented. An upper bound of the efficiency is also derived

Minimal modification to tribimaximal mixing

International Nuclear Information System (INIS)

He Xiaogang; Zee, A.

2011-01-01

We explore some ways of minimally modifying the neutrino mixing matrix from tribimaximal, characterized by introducing at most one mixing angle and a CP violating phase thus extending our earlier work. One minimal modification, motivated to some extent by group theoretic considerations, is a simple case with the elements V α2 of the second column in the mixing matrix equal to 1/√(3). Modifications by keeping one of the columns or one of the rows unchanged from tribimaximal mixing all belong to the class of minimal modification. Some of the cases have interesting experimentally testable consequences. In particular, the T2K and MINOS collaborations have recently reported indications of a nonzero θ 13 . For the cases we consider, the new data sharply constrain the CP violating phase angle δ, with δ close to 0 (in some cases) and π disfavored.

Generalized, Linear, and Mixed Models

CERN Document Server

McCulloch, Charles E; Neuhaus, John M

2011-01-01

An accessible and self-contained introduction to statistical models-now in a modernized new editionGeneralized, Linear, and Mixed Models, Second Edition provides an up-to-date treatment of the essential techniques for developing and applying a wide variety of statistical models. The book presents thorough and unified coverage of the theory behind generalized, linear, and mixed models and highlights their similarities and differences in various construction, application, and computational aspects.A clear introduction to the basic ideas of fixed effects models, random effects models, and mixed m

Rheologic properties of fresh cement mixes for repository sealing applications: effects of superplasticizers, mixing procedures, and time

International Nuclear Information System (INIS)

Roy, D.M.; Asaga, K.

1982-09-01

As part of the design of optimally durable, hardened cementitious plugging materials for repository borheole plugging, shaft and tunnel sealing, detailed studies of rheological properties have been made. The effects of mixing procedures upon measured rheological properties of fresh cement mixes with and without superplasticizing admixtures condensates of sulfonated naphthalene- and melamine-formaldehyde have been investigated. Coaxial cylindrical viscometer measurements were made, recording shear stress-shear rate relationships and defining yield stress and plastic viscosity. In the absence of admixture, yield stress and plastic viscosity decreased substantially with increasing intensity of mixing, which caused a breakdown of particulate aggregates. However, with admixture present, the rheological properties of already well-dispersed mixes did not change significantly with increasingly intense mixing. The changes of the viscometric functions with time were investigated, and were related to admixture type and concentration, cement type, and volume concentration of cement. The mechanisms of action of the superplasticizers and their use in generating reliable workable low water/cement ratio mixes are discussed. 36 figures, 3 tables

Neutrino mixing in SO(10)

International Nuclear Information System (INIS)

Milton, K.; Hama, S.; Nandi, S.; Tanaka, K.

1980-01-01

Neutrino mixing angles were computed in terms of upquark mass ratios in a grand unified field theory based on the gauge group SO(10) supplemented by a discrete symmetry. Only large ν/sub μ/ - ν/sub tau/ mixing were found

Quark-lepton universality and large leptonic mixing

International Nuclear Information System (INIS)

Joshipura, Anjan S.; Smirnov, A.Yu.

2006-01-01

A unified description of fermionic mixing is proposed which assumes that in certain basis (i) a single complex unitary matrix V diagonalizes mass matrices of all fermions to the leading order (ii) the SU(5) relation M d =M l T exists between the mass matrices of the down quarks and the charged leptons, and (iii) M d - bar =M d . These assumptions automatically lead to different mixing patterns for quarks and leptons: Quarks remain unmixed to leading order (i.e. V CKM =1) while leptons have non-trivial mixing given by a symmetric unitary matrix V PMNS 0 =V T V. V depends on two physical mixing angles and for values of these angles ∼20 o -25 o it reproduces the observed mixing patterns rather well. We identify conditions under which the universal mixing V follows from the universal mass matrices of fermions. Relatively small perturbations to the leading order structure lead to the CKM mixing and corrections to V PMNS 0 . We find that if the correction matrix equals the CKM matrix, the resulting lepton mixing agrees well with data and predicts (V PMNS ) e3 >0.08

Mixed methods research in music therapy research.

Science.gov (United States)

Bradt, Joke; Burns, Debra S; Creswell, John W

2013-01-01

Music therapists have an ethical and professional responsibility to provide the highest quality care possible to their patients. Much of the time, high quality care is guided by evidence-based practice standards that integrate the most current, available research in making decisions. Accordingly, music therapists need research that integrates multiple ways of knowing and forms of evidence. Mixed methods research holds great promise for facilitating such integration. At this time, there have not been any methodological articles published on mixed methods research in music therapy. The purpose of this article is to introduce mixed methods research as an approach to address research questions relevant to music therapy practice. This article describes the core characteristics of mixed methods research, considers paradigmatic issues related to this research approach, articulates major challenges in conducting mixed methods research, illustrates four basic designs, and provides criteria for evaluating the quality of mixed methods articles using examples of mixed methods research from the music therapy literature. Mixed methods research offers unique opportunities for strengthening the evidence base in music therapy. Recommendations are provided to ensure rigorous implementation of this research approach.

Diffusion-limited mixing by incompressible flows

Science.gov (United States)

Miles, Christopher J.; Doering, Charles R.

2018-05-01

Incompressible flows can be effective mixers by appropriately advecting a passive tracer to produce small filamentation length scales. In addition, diffusion is generally perceived as beneficial to mixing due to its ability to homogenize a passive tracer. However we provide numerical evidence that, in cases where advection and diffusion are both actively present, diffusion may produce negative effects by limiting the mixing effectiveness of incompressible optimal flows. This limitation appears to be due to the presence of a limiting length scale given by a generalised Batchelor length (Batchelor 1959 J. Fluid Mech. 5 113–33). This length scale limitation may in turn affect long-term mixing rates. More specifically, we consider local-in-time flow optimisation under energy and enstrophy flow constraints with the objective of maximising the mixing rate. We observe that, for enstrophy-bounded optimal flows, the strength of diffusion may not impact the long-term mixing rate. For energy-constrained optimal flows, however, an increase in the strength of diffusion can decrease the mixing rate. We provide analytical lower bounds on mixing rates and length scales achievable under related constraints (point-wise bounded speed and rate-of-strain) by extending the work of Lin et al (2011 J. Fluid Mech. 675 465–76) and Poon (1996 Commun. PDE 21 521–39).

Why, and how, mixed methods research is undertaken in health services research in England: a mixed methods study

Science.gov (United States)

O'Cathain, Alicia; Murphy, Elizabeth; Nicholl, Jon

2007-01-01

Background Recently, there has been a surge of international interest in combining qualitative and quantitative methods in a single study – often called mixed methods research. It is timely to consider why and how mixed methods research is used in health services research (HSR). Methods Documentary analysis of proposals and reports of 75 mixed methods studies funded by a research commissioner of HSR in England between 1994 and 2004. Face-to-face semi-structured interviews with 20 researchers sampled from these studies. Results 18% (119/647) of HSR studies were classified as mixed methods research. In the documentation, comprehensiveness was the main driver for using mixed methods research, with researchers wanting to address a wider range of questions than quantitative methods alone would allow. Interviewees elaborated on this, identifying the need for qualitative research to engage with the complexity of health, health care interventions, and the environment in which studies took place. Motivations for adopting a mixed methods approach were not always based on the intrinsic value of mixed methods research for addressing the research question; they could be strategic, for example, to obtain funding. Mixed methods research was used in the context of evaluation, including randomised and non-randomised designs; survey and fieldwork exploratory studies; and instrument development. Studies drew on a limited number of methods – particularly surveys and individual interviews – but used methods in a wide range of roles. Conclusion Mixed methods research is common in HSR in the UK. Its use is driven by pragmatism rather than principle, motivated by the perceived deficit of quantitative methods alone to address the complexity of research in health care, as well as other more strategic gains. Methods are combined in a range of contexts, yet the emerging methodological contributions from HSR to the field of mixed methods research are currently limited to the single

RO1 Funding for Mixed Methods Research: Lessons learned from the Mixed-Method Analysis of Japanese Depression Project

OpenAIRE

Arnault, Denise Saint; Fetters, Michael D.

2011-01-01

Mixed methods research has made significant in-roads in the effort to examine complex health related phenomenon. However, little has been published on the funding of mixed methods research projects. This paper addresses that gap by presenting an example of an NIMH funded project using a mixed methods QUAL-QUAN triangulation design entitled “The Mixed-Method Analysis of Japanese Depression.” We present the Cultural Determinants of Health Seeking model that framed the study, the specific aims, ...

Experimental study of laminar mixed convection in a rod bundle with mixing vane spacer grids

Energy Technology Data Exchange (ETDEWEB)

Mohanta, Lokanath, E-mail: lxm971@psu.edu [Department of Mechanical and Nuclear Engineering, Pennsylvania State University, University Park, PA 16802 (United States); Cheung, Fan-Bill [Department of Mechanical and Nuclear Engineering, Pennsylvania State University, University Park, PA 16802 (United States); Bajorek, Stephen M.; Tien, Kirk; Hoxie, Chris L. [Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, Washington, DC 20555-0001 (United States)

2017-02-15

Highlights: • Investigated the heat transfer during mixed laminar convection in a rod bundle with linearly varying heat flux. • The Nusselt number increases downstream of the inlet with increasing Richardson number. • Developed an enhancement factor to account for the effects of mixed convection over the forced laminar heat transfer. - Abstract: Heat transfer by mixed convection in a rod bundle occurs when convection is affected by both the buoyancy and inertial forces. Mixed convection can be assumed when the Richardson number (Ri = Gr/Re{sup 2}) is on the order of unity, indicating that both forced and natural convection are important contributors to heat transfer. In the present study, data obtained from the Rod Bundle Heat Transfer (RBHT) facility was used to determine the heat transfer coefficient in the mixed convection regime, which was found to be significantly larger than those expected assuming purely forced convection based on the inlet flow rate. The inlet Reynolds (Re) number for the tests ranged from 500 to 1300, while the Grashof (Gr) number varied from 1.5 × 10{sup 5} to 3.8 × 10{sup 6} yielding 0.25 < Ri < 4.3. Using results from RBHT test along with the correlation from the FLECHT-SEASET test program for laminar forced convection, a new correlation ​is proposed for mixed convection in a rod bundle. The new correlation accounts for the enhancement of heat transfer relative to laminar forced convection.

Text-in-context: a method for extracting findings in mixed-methods mixed research synthesis studies.

Science.gov (United States)

Sandelowski, Margarete; Leeman, Jennifer; Knafl, Kathleen; Crandell, Jamie L

2013-06-01

Our purpose in this paper is to propose a new method for extracting findings from research reports included in mixed-methods mixed research synthesis studies. International initiatives in the domains of systematic review and evidence synthesis have been focused on broadening the conceptualization of evidence, increased methodological inclusiveness and the production of evidence syntheses that will be accessible to and usable by a wider range of consumers. Initiatives in the general mixed-methods research field have been focused on developing truly integrative approaches to data analysis and interpretation. The data extraction challenges described here were encountered, and the method proposed for addressing these challenges was developed, in the first year of the ongoing (2011-2016) study: Mixed-Methods Synthesis of Research on Childhood Chronic Conditions and Family. To preserve the text-in-context of findings in research reports, we describe a method whereby findings are transformed into portable statements that anchor results to relevant information about sample, source of information, time, comparative reference point, magnitude and significance and study-specific conceptions of phenomena. The data extraction method featured here was developed specifically to accommodate mixed-methods mixed research synthesis studies conducted in nursing and other health sciences, but reviewers might find it useful in other kinds of research synthesis studies. This data extraction method itself constitutes a type of integration to preserve the methodological context of findings when statements are read individually and in comparison to each other. © 2012 Blackwell Publishing Ltd.

Renormalization of fermion mixing

International Nuclear Information System (INIS)

Schiopu, R.

2007-01-01

Precision measurements of phenomena related to fermion mixing require the inclusion of higher order corrections in the calculation of corresponding theoretical predictions. For this, a complete renormalization scheme for models that allow for fermion mixing is highly required. The correct treatment of unstable particles makes this task difficult and yet, no satisfactory and general solution can be found in the literature. In the present work, we study the renormalization of the fermion Lagrange density with Dirac and Majorana particles in models that involve mixing. The first part of the thesis provides a general renormalization prescription for the Lagrangian, while the second one is an application to specific models. In a general framework, using the on-shell renormalization scheme, we identify the physical mass and the decay width of a fermion from its full propagator. The so-called wave function renormalization constants are determined such that the subtracted propagator is diagonal on-shell. As a consequence of absorptive parts in the self-energy, the constants that are supposed to renormalize the incoming fermion and the outgoing antifermion are different from the ones that should renormalize the outgoing fermion and the incoming antifermion and not related by hermiticity, as desired. Instead of defining field renormalization constants identical to the wave function renormalization ones, we differentiate the two by a set of finite constants. Using the additional freedom offered by this finite difference, we investigate the possibility of defining field renormalization constants related by hermiticity. We show that for Dirac fermions, unless the model has very special features, the hermiticity condition leads to ill-defined matrix elements due to self-energy corrections of external legs. In the case of Majorana fermions, the constraints for the model are less restrictive. Here one might have a better chance to define field renormalization constants related by

Renormalization of fermion mixing

Energy Technology Data Exchange (ETDEWEB)

Schiopu, R.

2007-05-11

Precision measurements of phenomena related to fermion mixing require the inclusion of higher order corrections in the calculation of corresponding theoretical predictions. For this, a complete renormalization scheme for models that allow for fermion mixing is highly required. The correct treatment of unstable particles makes this task difficult and yet, no satisfactory and general solution can be found in the literature. In the present work, we study the renormalization of the fermion Lagrange density with Dirac and Majorana particles in models that involve mixing. The first part of the thesis provides a general renormalization prescription for the Lagrangian, while the second one is an application to specific models. In a general framework, using the on-shell renormalization scheme, we identify the physical mass and the decay width of a fermion from its full propagator. The so-called wave function renormalization constants are determined such that the subtracted propagator is diagonal on-shell. As a consequence of absorptive parts in the self-energy, the constants that are supposed to renormalize the incoming fermion and the outgoing antifermion are different from the ones that should renormalize the outgoing fermion and the incoming antifermion and not related by hermiticity, as desired. Instead of defining field renormalization constants identical to the wave function renormalization ones, we differentiate the two by a set of finite constants. Using the additional freedom offered by this finite difference, we investigate the possibility of defining field renormalization constants related by hermiticity. We show that for Dirac fermions, unless the model has very special features, the hermiticity condition leads to ill-defined matrix elements due to self-energy corrections of external legs. In the case of Majorana fermions, the constraints for the model are less restrictive. Here one might have a better chance to define field renormalization constants related by

Should we consider steps with variable height for a safer stair negotiation in older adults?

Science.gov (United States)

Kunzler, Marcos R; da Rocha, Emmanuel S; Dos Santos, Christielen S; Ceccon, Fernando G; Priario, Liver A; Carpes, Felipe P

2018-01-01

Effects of exercise on foot clearances are important. In older adults variations in foot clearances during walking may lead to a fall, but there is a lack of information concerning stair negotiation in older adults. Whether a condition of post exercise changes foot clearances between steps of a staircase in older adults still unknown. To determine differences in clearances when older adults negotiate different steps of a staircase before and after a session of aerobic exercise. Kinematics data from 30 older adults were acquired and the toe and heel clearances were determined for each step. Clearances were compared between the steps. Smaller clearances were found at the highest step during ascending and descending, which was not changed by exercise. Smaller clearances suggest higher risk of tripping at the top of the staircase, regardless of exercise. A smaller step at the top of a short flight of stairs could reduce chances of tripping in older adults. It suggests that steps with variable height could make stair negotiation safer in older adults. This hypothesis should be tested in further studies.

The Acoustics of the Double Elliptical Vault of the Royal Palace of Caserta (Italy

Directory of Open Access Journals (Sweden)

Umberto Berardi

2017-03-01

Full Text Available This work investigates the acoustic characteristics of the double elliptical vault, which overlooks the Grand Staircase of the Royal Palace of Caserta (Italy. The Royal Palace was built by the architect Luigi Vanvitelli in the Seventeenth Century and it is the largest royal building in Italy. The double elliptical vault presents a great scenography effect. Inside the vault, on the planking level, musicians used to play for the king and his guests when the royal procession, going up the grand staircase, entered the royal apartments, creating astonishment among the guests who heard the music without understanding from where it was coming. Since the musicians were inside the vault, the long reverberation made the listeners perceive the vault to be enveloped by the music. To investigate this effect, the acoustic characteristics of the double vault were measured, putting the sound source on the planking level of the vault, while the microphones were put along the staircase and in the vestibule towards the royal apartments. Finally, the spatial distribution of several acoustic parameters is evaluated also using architectural acoustic simulations.

Theoretical Models of Neutrino Mixing Recent Developments

CERN Document Server

Altarelli, Guido

2009-01-01

The data on neutrino mixing are at present compatible with Tri-Bimaximal (TB) mixing. If one takes this indication seriously then the models that lead to TB mixing in first approximation are particularly interesting and A4 models are prominent in this list. However, the agreement of TB mixing with the data could still be an accident. We discuss a recent model based on S4 where Bimaximal mixing is instead valid at leading order and the large corrections needed to reproduce the data arise from the diagonalization of charged leptons. The value of $\\theta_{13}$ could distinguish between the two alternatives.

Mixed language programming

International Nuclear Information System (INIS)

Burow, Burkhard D.

1996-01-01

Computing in the next millennium will be using software from this millennium. Programming languages evolve and new ones continue to be created. The use of legacy code demonstrates why some present and future applications may span programming languages. Even a completely new application may mix programming languages, if it allows its components to be more conveniently expressed. Given the need, mixed language programming should be easy and robust. By resolving a variety of difficulties, the well established cfortran.h package provides, the desired convenient interface across the C and Fortran programming languages, as demonstrated using CERN's Book. (author)

Observation of charm mixing at LHCb

CERN Multimedia

CERN. Geneva

2012-01-01

Meson-antimeson mixing has been observed in the K0−K0bar, B0−B0bar and B0s−B0sbar systems. Evidence of mixing in the charm system has been reported by three experiments using different D0 decay channels, but only the combination of these results provides confirmation of D0−D0bar mixing with more than 5σ significance. We report a measurement of charm mixing using the time-dependent ratio of D0 → K+π− to D0 → K−π+ decay rates in D∗+-tagged events reconstructed in 1.0 fb−1 of integrated luminosity recorded by the LHCb experiment in 2011. We measure the mixing parameters x'2 = (−0.9 ± 1.3) × 10−4, y' = (7.2 ± 2.4) × 10−3 and the ratio of doubly-Cabibbo-suppressed to Cabibbo-favored decay rates RD = (3.52 ± 0.15) × 10−3. The result excludes the no-mixing hypothesis with a probability corresponding to 9.1σ and represents the first observation of D0−D0bar oscillations from a single measurement.

Mixed beams for the nuclear microprobe

Energy Technology Data Exchange (ETDEWEB)

Saint, A.; Breese, M.B.H.; Legge, G.L.F. [Melbourne Univ., Parkville, VIC (Australia). School of Physics

1996-12-31

Recently the Micro-Analytical Research Centre (MARC) at Melbourne University has developed a technique to provide mixed beams of ions for a magnetically focussed nuclear microprobe. Such a mixed beam is defined as two (or more) beams of different species ions that can quickly and easily be made to have the same magnetic rigidity R{sub m} = (mE/q{sup 2}) and therefore be transported, focused and scanned the same in a magnetic nuclear microprobe. The production of mixed beams in an electrostatically focussed micro- probe have already been demonstrated. This paper will show how mixed beams can be produced on a single-ended accelerator. Indications of how to produce them on a tandem will also be given. Applications of these mixed beams in micro-lithography, scanning transmission ion microscopy (STIM) imaging and ion beam induced charge (IBIC) imaging will also be presented. 3 refs., 3 figs.

Mixed beams for the nuclear microprobe

Energy Technology Data Exchange (ETDEWEB)

Saint, A; Breese, M B.H.; Legge, G L.F. [Melbourne Univ., Parkville, VIC (Australia). School of Physics

1997-12-31

Recently the Micro-Analytical Research Centre (MARC) at Melbourne University has developed a technique to provide mixed beams of ions for a magnetically focussed nuclear microprobe. Such a mixed beam is defined as two (or more) beams of different species ions that can quickly and easily be made to have the same magnetic rigidity R{sub m} = (mE/q{sup 2}) and therefore be transported, focused and scanned the same in a magnetic nuclear microprobe. The production of mixed beams in an electrostatically focussed micro- probe have already been demonstrated. This paper will show how mixed beams can be produced on a single-ended accelerator. Indications of how to produce them on a tandem will also be given. Applications of these mixed beams in micro-lithography, scanning transmission ion microscopy (STIM) imaging and ion beam induced charge (IBIC) imaging will also be presented. 3 refs., 3 figs.

Features of neutrino mixing

Science.gov (United States)

Chiu, S. H.; Kuo, T. K.

2018-03-01

The elements (squared) of the neutrino mixing matrix are found to satisfy, as functions of the induced mass, a set of differential equations. They show clearly the dominance of pole terms when the neutrino masses "cross." Using the known vacuum mixing parameters as initial conditions, it is found that these equations have very good approximate solutions, for all values of the induced mass. The results are applicable to long baseline experiments.

Overview of mixed waste issues

International Nuclear Information System (INIS)

Piciulo, P.L.; Bowerman, B.S.; Kempf, C.R.; MacKenzie, D.R.; Siskind, B.

1986-01-01

Based on BNL's study it was concluded that there are LLWs which contain chemically hazardous components. Scintillation liquids may be considered an EPA listed hazardous waste and are, therefore, potential mixed wastes. Since November, 1985 no operating LLW disposal site will accept these wastes for disposal. Unless such wastes contain de minimis quantities of radionuclides, they cannot be disposed of at an EPA an EPA permitted site. Currently generators of LSC wastes can ship de minimis wastes to be burned at commercial facilities. Oil wastes will also eventually be an EPA listed waste and thus will have to be considered a potential radioactive mixed wasted unless NRC establishes de minimis levels of radionuclides below which oils can be managed as hazardous wastes. Regarding wastes containing lead metal there is some question as to the extent of the hazard posed by lead disposed in a LLW burial trench. Chromium-containing wastes would have to be tested to determine whether they are potential mixed wastes. There may be other wastes that are mixed wastes; the responsibility for determining this rests with the waste generator. It is believed that there are management options for handling potential mixed wastes but there is no regulatory guidance. BNL has identified and evaluated a variety of treatment options for the management of potential radioactive mixed wastes. The findings of that study showed that application of a management option with the purpose of addressing EPA concern can, at the same time, address stabilization and volume reduction concerns of NRC

Energy correlations for mixed rotational bands

International Nuclear Information System (INIS)

Doessing, T.

1985-01-01

A schematic model for the mixing of rotational bands above the yrast line in well deformed nuclei is considered. Many-particle configurations of a rotating mean field form basis bands, and these are subsequently mixed due to a two body residual interaction. The energy interval over which a basis band is spread out increases with increasing excitation energy above the yrast line. Conversely, the B(E2) matrix element for rotational decay out of one of the mixed band states is spread over an interval which is predicted to become more narrow with increasing excitation energy. Finally, the implication of band mixing for γ-ray energy correlations is briefly discussed. (orig.)

Coolant mixing in LMFBR rod bundles and outlet plenum mixing transients. Final report

International Nuclear Information System (INIS)

Todreas, N.E.; Cheng, S.K.; Basehore, K.

1984-08-01

This project principally undertook the investigation of the thermal hydraulic performance of wire wrapped fuel bundles of LMFBR configuration. Results obtained included phenomenological models for friction factors, flow split and mixing characteristics; correlations for predicting these characteristics suitable for insertion in design codes; numerical codes for analyzing bundle behavior both of the lumped subchannel and distributed parameter categories and experimental techniques for pressure velocity, flow split, salt conductivity and temperature measurement in water cooled mockups of bundles and subchannels. Flow regimes investigated included laminar, transition and turbulent flow under forced convection and mixed convection conditions. Forced convections conditions were emphasized. Continuing efforts are underway at MIT to complete the investigation of the mixed convection regime initiated here. A number of investigations on outlet plenum behavior were also made. The reports of these investigations are identified

Performance of Portland cement mixes containing silica fume and mixed with lime-water

Directory of Open Access Journals (Sweden)

Metwally A.A. Abd Elaty

2014-12-01

Test results show that using lime-water in mixing enhances consistency degree compared to the corresponding control mixes. Furthermore, it delays both initial and final setting times compared with traditional water due to the common ion effect principles. Moreover, combined use of lime-water and silica fume enhances the pozzolanic reaction that was identified by the strength development at both early and later ages. The existence of CH crystals for higher percentages of silica fume (up to 30% for further reaction at later ages was observed by XRD results. Moreover, combined use of silica fume and lime-water ensures a high alkaline media around steel bars from the moment of ingredients mixing as long as later ages despite of pozzolanic reaction that was identified from results of chloride attack.

[Marketing mix in health service].

Science.gov (United States)

Ameri, Cinzia; Fiorini, Fulvio

2015-01-01

The marketing mix is the combination of the marketing variables that a firm employs with the purpose to achieve the expected volume of business within its market. In the sale of goods, four variables compose the marketing mix (4 Ps): Product, Price, Point of sale and Promotion. In the case of providing services, three further elements play a role: Personnel, Physical Evidence and Processes (7 Ps). The marketing mix must be addressed to the consumers as well as to the employees of the providing firm. Furthermore, it must be interpreted as employees ability to satisfy customers (interactive marketing).

Large neutrino mixing from renormalization group evolution

International Nuclear Information System (INIS)

Balaji, K.R.S.; Mohapatra, R.N.; Parida, M.K.; Paschos, E.A.

2000-10-01

The renormalization group evolution equation for two neutrino mixing is known to exhibit nontrivial fixed point structure corresponding to maximal mixing at the weak scale. The presence of the fixed point provides a natural explanation of the observed maximal mixing of ν μ - ν τ , if the ν μ and ν τ are assumed to be quasi-degenerate at the seesaw scale without constraining the mixing angles at that scale. In particular, it allows them to be similar to the quark mixings as in generic grand unified theories. We discuss implementation of this program in the case of MSSM and find that the predicted mixing remains stable and close to its maximal value, for all energies below the O(TeV) SUSY scale. We also discuss how a particular realization of this idea can be tested in neutrinoless double beta decay experiments. (author)

Performance life of HMA mixes : final report.

Science.gov (United States)

2016-01-01

A number of hot mix asphalt (HMA) types, such as permeable friction course (PFC), stone mastic asphalts : (SMA), performance design mixes and conventional dense graded mixes are currently used to construct or overlay : roads. One of the important inp...

Marketing Mix sebagai Alat Pembeda dalam Persaingan

OpenAIRE

Pura A, Agus Hasan

2012-01-01

Marketers must not only formulate the broad strategies to achieve its marketing objectives but also plan marketing mix programs. Many good strategies fail when it comes to development of specific marketing - mix tactics. Decision must be made to transform marketing strategy to marketing mix and to provide competitive advantageous in the competitive market place and in the same time to provide what market needs. Key words : Integrated Marketing, Marketing Mix, Differentiation, Customer Valu...

Modeling of mixing in stirred bioreactors 4. mixing time for aerated bacteria, yeasts and fungus broths

Directory of Open Access Journals (Sweden)

Cascaval Dan

2004-01-01

Full Text Available The mixing time for bioreactors depends mainly on the rheoiogicai properties of the broths, the biomass concentration and morphology, mixing system characteristics and fermentation conditions. For quantifying the influence of these factors on the mixing efficiency for stirred bioreactors, aerated broths of bacteria (P. shermanii, yeasts (S. cerevisiae and fungi (P. chrysogenum, free mycelia and mycelial aggregates of different concentrations have been investigated using a laboratory bioreactor with a double turbine impeller. The experimental data indicated that the influence of the rotation speed, aeration rate and stirrer positions on the mixing intensity strongly differ from one system to another and must be correlated with the microorganism characteristics, namely: the biomass concentration and morphology. Moreover, compared with non-aerated broths, variations of the mixing time with the considered parameters are very different, due to the complex flow mechanism of gas-liquid dispersions. By means of the experimental data and using a multiregression analysis method some mathematical correlations for the mixing time of the general form: tm = a1*Cx2+a2*Cx+a3*IgVa+a4-N2+a5-N+a6/a7*L2+a8*L+a9 were established. The proposed equations offer good agreement with the experiments, the average deviation being ±6.7% - ±9.4 and are adequate for the flow regime Re < 25,000.

Status of mixed-waste regulation

International Nuclear Information System (INIS)

Bahadur, S.

1988-01-01

Mixed waste is waste containing radionuclides regulated by the US Nuclear Regulatory Commission (NRC) under the Atomic Energy Act, as well as hazardous waste materials regulated by the Environmental Protection Agency (EPA) under the Resource Conservation and Recovery Act (RCRA). This has led to a situation of dual regulation in which both NRC and EPA regulate the same waste under requirements that at times appear conflicting. The NRC has been working with the EPA to resolve the issues associated with the dual regulation of mixed waste. Discussions between the two agencies indicate that dual regulation of mixed wastes appears technically achievable, although the procedures may be complex and burdensome to the regulated community. The staffs of both agencies have been coordinating their efforts to minimize the burden of dual regulation on state agencies and the industry. Three major issues were identified as sources of potential regulatory conflict: (a) definition and identification of mixed waste, (b) siting guidelines for disposal facilities, and (c) design concepts for disposal units

Is the tribimaximal mixing accidental?

International Nuclear Information System (INIS)

Abbas, Mohammed; Smirnov, A. Yu.

2010-01-01

The tribimaximal (TBM) mixing is not accidental if structures of the corresponding leptonic mass matrices follow immediately from certain (residual or broken) flavor symmetry. We develop a simple formalism which allows one to analyze effects of deviations of the lepton mixing from TBM on the structure of the neutrino mass matrix and on the underlying flavor symmetry. We show that possible deviations from the TBM mixing can lead to strong modifications of the mass matrix and strong violation of the TBM-mass relations. As a result, the mass matrix may have an 'anarchical' structure with random values of elements or it may have some symmetry that differs from the TBM symmetry. Interesting examples include matrices with texture zeros, matrices with certain 'flavor alignment' as well as hierarchical matrices with a two-component structure, where the dominant and subdominant contributions have different symmetries. This opens up new approaches to understanding the lepton mixing.

Mixed-effects regression models in linguistics

CERN Document Server

Heylen, Kris; Geeraerts, Dirk

2018-01-01

When data consist of grouped observations or clusters, and there is a risk that measurements within the same group are not independent, group-specific random effects can be added to a regression model in order to account for such within-group associations. Regression models that contain such group-specific random effects are called mixed-effects regression models, or simply mixed models. Mixed models are a versatile tool that can handle both balanced and unbalanced datasets and that can also be applied when several layers of grouping are present in the data; these layers can either be nested or crossed.  In linguistics, as in many other fields, the use of mixed models has gained ground rapidly over the last decade. This methodological evolution enables us to build more sophisticated and arguably more realistic models, but, due to its technical complexity, also introduces new challenges. This volume brings together a number of promising new evolutions in the use of mixed models in linguistics, but also addres...

Laser self-mixing interference fibre sensor

International Nuclear Information System (INIS)

Zhu Jun; Zhao Yan; Jin Guofan

2008-01-01

Fibre sensors exhibit a number of advantages over other sensors such as high sensitivity, electric insulation, corrosion resistance, interference rejection and so on. And laser self-mixing interference can accurately detect the phase difference of feedback light. In this paper, a novel laser self-mixing interference fibre sensor that combines the advantages of fibre sensors with those of laser self-mixing interference is presented. Experimental configurations are set up to study the relationship between laser power output and phase of laser feedback light when the fibre trembles or when the fibre is stretched or pressed. The theoretical analysis of pressure sensors based on laser self-mixing interference is indicated to accord with the experimental results. (classical areas of phenomenology)

Mixing in a Microfluid Device

DEFF Research Database (Denmark)

Hjorth, Poul G.; Deryabin, Mikhail

Mixing of fluids in microchannels cannot rely on turbulence since the flow takes place at extremly low Reynolds numbers. Various active and passive devices have been developed to induce mixing in microfluid flow devices. We describe here a model of an active mixer where a transverse periodic flow...

Bounding CKM mixing with a fourth family

International Nuclear Information System (INIS)

Chanowitz, Michael S.

2009-01-01

CKM mixing between third-family quarks and a possible fourth family is constrained by global fits to the precision electroweak data. The dominant constraint is from nondecoupling oblique corrections rather than the vertex correction to Z→bb used in previous analyses. The possibility of large mixing suggested by some recent analyses of flavor-changing neutral-current processes is excluded, but 3-4 mixing of the same order as the Cabbibo mixing of the first two families is allowed.

Optimizing MFT dewatering by controlling polymer mixing

Energy Technology Data Exchange (ETDEWEB)

Demoz, A.; Munoz, V.; Mikula, R. [Natural Resources Canada, Devon, AB (Canada). CANMET Western Research Centre

2010-07-01

A method of controlling polymer mixing for the dewatering of mature fine tailings (MFT) was presented. The method was developed to accelerate water release from MFT and to recover more water for re-use. Dewatering rates are dependent upon hydrodynamic conditions as well as various physical mixing variables. The effect of mixing energy on the rate and amount of released water flocculated MFT was investigated using different impellers in order to determine the release water amount and capillary suction time. The mixing energy effect on the structure of the flocculated MFT was analyzed using rheology and stereo microscopy techniques. Batch mixing tests were conducted to determine dewatering characteristics. Flow was described using the Herschel-Bulkley model. Results of the study demonstrated a clear peak in the amount of water released with the mixing time. The effect was applicable to rim-ditch thin-lift, and dewatering by centrifugation. tabs., figs.

Mixed-culture transcriptome analysis reveals the molecular basis of mixed-culture growth in Streptococcus thermophilus and Lactobacillus bulgaricus.

Science.gov (United States)

Sieuwerts, Sander; Molenaar, Douwe; van Hijum, Sacha A F T; Beerthuyzen, Marke; Stevens, Marc J A; Janssen, Patrick W M; Ingham, Colin J; de Bok, Frank A M; de Vos, Willem M; van Hylckama Vlieg, Johan E T

2010-12-01

Many food fermentations are performed using mixed cultures of lactic acid bacteria. Interactions between strains are of key importance for the performance of these fermentations. Yogurt fermentation by Streptococcus thermophilus and Lactobacillus bulgaricus (basonym, Lactobacillus delbrueckii subsp. bulgaricus) is one of the best-described mixed-culture fermentations. These species are believed to stimulate each other's growth by the exchange of metabolites such as folic acid and carbon dioxide. Recently, postgenomic studies revealed that an upregulation of biosynthesis pathways for nucleotides and sulfur-containing amino acids is part of the global physiological response to mixed-culture growth in S. thermophilus, but an in-depth molecular analysis of mixed-culture growth of both strains remains to be established. We report here the application of mixed-culture transcriptome profiling and a systematic analysis of the effect of interaction-related compounds on growth, which allowed us to unravel the molecular responses associated with batch mixed-culture growth in milk of S. thermophilus CNRZ1066 and L. bulgaricus ATCC BAA-365. The results indicate that interactions between these bacteria are primarily related to purine, amino acid, and long-chain fatty acid metabolism. The results support a model in which formic acid, folic acid, and fatty acids are provided by S. thermophilus. Proteolysis by L. bulgaricus supplies both strains with amino acids but is insufficient to meet the biosynthetic demands for sulfur and branched-chain amino acids, as becomes clear from the upregulation of genes associated with these amino acids in mixed culture. Moreover, genes involved in iron uptake in S. thermophilus are affected by mixed-culture growth, and genes coding for exopolysaccharide production were upregulated in both organisms in mixed culture compared to monocultures. The confirmation of previously identified responses in S. thermophilus using a different strain combination

The mixing effects for real gases and their mixtures

Science.gov (United States)

Gong, M. Q.; Luo, E. C.; Wu, J. F.

2004-10-01

The definitions of the adiabatic and isothermal mixing effects in the mixing processes of real gases were presented in this paper. Eight substances with boiling-point temperatures from cryogenic temperature to the ambient temperature were selected from the interest of low temperature refrigeration to study their binary and multicomponent mixing effects. Detailed analyses were made on the parameters of the mixing process to know their influences on mixing effects. Those parameters include the temperatures, pressures, and mole fraction ratios of pure substances before mixing. The results show that the maximum temperature variation occurs at the saturation state of each component in the mixing process. Those components with higher boiling-point temperatures have higher isothermal mixing effects. The maximum temperature variation which is defined as the adiabatic mixing effect can even reach up to 50 K, and the isothermal mixing effect can reach about 20 kJ/mol. The possible applications of the mixing cooling effect in both open cycle and closed cycle refrigeration systems were also discussed.

Meaningful mix or tricky conflict? A categorisation of mixed emotions and their usefulness for design

NARCIS (Netherlands)

Fokkinga, S.F.; Desmet, P.M.A.

2012-01-01

Mixed emotions are at the basis of some of life’s richest experiences. However, in other instances they are inferior to experiences that elicit just positive emotions. A phenomenological study was carried out to find out which kinds of situations evoke mixed emotions, how these emotions influence

Managing the supply chain with standard mixed loads

NARCIS (Netherlands)

Teulings, M.F.; Vlist, van der P.

2001-01-01

Describes the complementary standard mixed loads concept (the standard mix concept in short), which allows for assembling mixed loads at an upstream echelon. These standard mixed loads are assigned to customer orders at an echelon downstream of the chain. Describes two applications of the use of the

24 CFR 891.825 - Mixed-finance closing documents.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Mixed-finance closing documents...-Profit Limited Partnerships and Mixed-Finance Development for Supportive Housing for the Elderly or Persons with Disabilities § 891.825 Mixed-finance closing documents. The mixed-finance owner must submit...

Martian Mixed Layer during Pathfinder Mission

Science.gov (United States)

Martinez, G. M.; Valero, F.; Vazquez, L.

2008-09-01

In situ measurements of the Martian Planetary Boundary Layer (MPBL) encompass only the sur- face layer. Therefore, in order to fully address the MPBL, it becomes necessary to simulate somehow the behaviour of the martian mixed layer. The small-scale processes that happen in the MPBL cause GCM's ([1], [2]) to describe only partially the turbulent statistics, height, convective scales, etc, of the surface layer and the mixed layer. For this reason, 2D and 3D martian mesoscale models ([4], [5]), and large eddy simulations ([4], [6], [7], [8]) have been designed in the last years. Although they are expected to simulate more accurately the MPBL, they take an extremely expensive compu- tational time. Alternatively, we have derived the main turbu- lent characteristics of the martian mixed layer by using surface layer and mixed layer similarity ([9], [10]). From in situ temperature and wind speed measurements, together with quality-tested simu- lated ground temperature [11], we have character- ized the martian mixed layer during the convective hours of Pathfinder mission Sol 25. Mean mixed layer turbulent statistics like tem- perature variance , horizontal wind speed variance , vertical wind speed variance , viscous dissipation rate , and turbu- lent kinetic energy have been calculated, as well as the mixed layer height zi, and the convective scales of wind w? and temperature θ?. Our values, obtained with negligible time cost, match quite well with some previously obtained results via LES's ([4] and [8]). A comparisson between the above obtained mar- tian values and the typical Earth values are shown in Table 1. Convective velocity scale w doubles its counterpart terrestrial typical value, as it does the mean wind speed variances and . On the other hand, the temperature scale θ? and the mean temperature variance are virtually around one order higher on Mars. The limitations of these results concern the va- lidity of the convective mixed layer similarity. This theory

Patch testing with constituents of Compositae mixes

DEFF Research Database (Denmark)

Paulsen, Evy; Andersen, Klaus Ejner

2012-01-01

Background. The development of mixes containing Compositae plant extracts has improved the diagnosis of Compositae contact allergy, but none of them has fulfilled the criteria for an ideal European plant mix. Objective. To evaluate which constituents of two commercial Compositae mixes were most u...

Study on mixing phenomena in T-pipe junction. Experimental analysis using DNS and investigation of mixing process

International Nuclear Information System (INIS)

Igarashi, Minoru; Tanaka, Masaaki; Kimura, Nobuyuki; Kamide, Hideki

2003-02-01

In the place where hot and cold fluids are mixed, a time and spatial temperature fluctuation occurs. When this temperature fluctuation amplitude is large, it causes high cycle thermal fatigue in surrounding structure (thermal striping phenomena). Mixing area of high and low temperature fluid exists not only in an atomic power plant but also in a general plant, then, it is significant to investigate this phenomena and also to establish an evaluation rule. In Japan Nuclear Cycle Development Institute, several experiments and the improvement of the analysis methods have been carried out to understand thermal striping phenomena and also to construct an evaluation rule, which can be applied to design. Water Experiment on Fluid Mixing in T-pipe with Long Cycle Fluctuation (WATLON), aiming at examining thermal striping phenomena in a mixing tee, is performed to investigate key factors of mixing phenomena. In this study, in order to investigate the fluid mixing phenomena, temperature and flow velocity distribution were measured by movable thermocouple tree and particle image velocimetry (PIV). And the analysis using a in-house direct numerical simulation (DNS) code, DINUS-3 was performed to understand applicability of the analytical method in mixing tee. The temperature and velocity fields obtained from the DINUS-3 were in good agreement with the experimental results. And the prominent frequency of temperature fluctuation was also in good agreement. The DINUS-3 calculation simulated vortex structure in the wake region behind the branch pipe jet. The results of analysis showed that a Karman vortex generated in the wake region behind the branch pipe jet influenced the temperature fluctuation behavior in the mixing tee. And the analytical results revealed that the vortex generated in the wake region behind the branch pipe jet showed the 3-dimensional behavior. (author)

Addressing mixed waste in plutonium processing

International Nuclear Information System (INIS)

Christensen, D.C.; Sohn, C.L.; Reid, R.A.

1991-01-01

The overall goal is the minimization of all waste generated in actinide processing facilities. Current emphasis is directed toward reducing and managing mixed waste in plutonium processing facilities. More specifically, the focus is on prioritizing plutonium processing technologies for development that will address major problems in mixed waste management. A five step methodological approach to identify, analyze, solve, and initiate corrective action for mixed waste problems in plutonium processing facilities has been developed

Using mixed methods in health research.

OpenAIRE

Tariq, S.; Woodman, J.

2013-01-01

Mixed methods research is the use of quantitative and qualitative methods in a single study or series of studies. It is an emergent methodology which is increasingly used by health researchers, especially within health services research. There is a growing literature on the theory, design and critical appraisal of mixed methods research. However, there are few papers that summarize this methodological approach for health practitioners who wish to conduct or critically engage with mixed method...

Tests of Parameterized Langmuir Circulation Mixing in the Oceans Surface Mixed Layer II

Science.gov (United States)

2017-08-11

inertial oscillations in the ocean are governed by three-dimensional processes that are not accounted for in a one-dimensional simulation , and it was...Unlimited 52 Paul Martin (228) 688-5447 Recent large-eddy simulations (LES) of Langmuir circulation (LC) within the surface mixed layer (SML) of...used in the Navy Coastal Ocean Model (NCOM) and tested for (a) a simple wind-mixing case, (b) simulations of the upper ocean thermal structure at Ocean

Kinetic mixing and the supersymmetric gauge hierarchy

International Nuclear Information System (INIS)

Dienes, K.R.; Kolda, C.; March-Russell, J.

1997-01-01

The most general Lagrangian for a model with two U(1) gauge symmetries contains a renormalizable operator which mixes their gauge kinetic terms. Such kinetic mixing can be generated at arbitrarily high scales but will not be suppressed by large masses. In models whose supersymmetry (SUSY)-breaking hidden sectors contain U(1) gauge factors, we show that such terms will generically arise and communicate SUSY breaking to the visible sector through mixing with hypercharge. In the context of the usual supergravity- or gauge-mediated communication scenarios with D-terms of order the fundamental scale of SUSY breaking, this effect can destabilize the gauge hierarchy. Even in models for which kinetic mixing is suppressed or the D-terms are arranged to be small, this effect is a potentially large correction to the soft scalar masses and therefore introduces a new measurable low-energy parameter. We calculate the size of kinetic mixing both in field theory and in string theory, and argue that appreciable kinetic mixing is a generic feature of string models. We conclude that the possibility of kinetic mixing effects cannot be ignored in model building and in phenomenological studies of the low-energy SUSY spectra. (orig.)

Viscoelastic behaviour of cold recycled asphalt mixes

Science.gov (United States)

Cizkova, Zuzana; Suda, Jan

2017-09-01

Behaviour of cold recycled mixes depends strongly on both the bituminous binder content (bituminous emulsion or foamed bitumen) and the hydraulic binder content (usually cement). In the case of cold recycled mixes rich in bitumen and with low hydraulic binder content, behaviour is close to the viscoelastic behaviour of traditional hot mix asphalt. With decreasing bituminous binder content together with increasing hydraulic binder content, mixes are characteristic with brittle behaviour, typical for concrete pavements or hydraulically bound layers. The behaviour of cold recycled mixes with low content of both types of binders is similar to behaviour of unbound materials. This paper is dedicated to analysing of the viscoelastic behaviour of the cold recycled mixes. Therefore, the tested mixes contained higher amount of the bituminous binder (both foamed bitumen and bituminous emulsion). The best way to characterize any viscoelastic material in a wide range of temperatures and frequencies is through the master curves. This paper includes interesting findings concerning the dependency of both parts of the complex modulus (elastic and viscous) on the testing frequency (which simulates the speed of heavy traffic passing) and on the testing temperature (which simulates the changing climate conditions a real pavement is subjected to).

24 CFR 891.815 - Mixed-finance developer's fee.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Mixed-finance developer's fee. 891...-Profit Limited Partnerships and Mixed-Finance Development for Supportive Housing for the Elderly or Persons with Disabilities § 891.815 Mixed-finance developer's fee. (a) Mixed-finance developer's fee. A...

Promocja a marketing-mix

OpenAIRE

Cyrson, Edward F.

1994-01-01

Many companies have often forgotten that promotion is an element of marketing-mix. Therelore their promotional campain has not always been as effective as it could be. In designing and developing marketing communication one should consider all elements of marketing-mix as well as all promotional tools. They together create a promotional system in which all the elements are Mutually reinforcing and give the system the most efficient and effective power. The major thrust of promo...

MARKETING MIX IN SPORT

OpenAIRE

Srećko Novaković; Slobodan Živkucin

2011-01-01

Marketing mix'' along the term of life cycle has robbed the trademark for the conception of marketing and the market direction of company, corporations and institutions. Essence marketing-mixa is in the simultaneous determining of the target market group of consumer (the buyer) or stays the public and specially prepared and the coordinated impact of elements mixa, and this is the product, price, distributions and graduation ceremonies. Given that is mix combinations of verified variables, com...

Mix-and-match holography

KAUST Repository

Peng, Yifan; Dun, Xiong; Sun, Qilin; Heidrich, Wolfgang

2017-01-01

target images into pairs of front and rear phase-distorting surfaces. Different target holograms can be decoded by mixing and matching different front and rear surfaces under specific geometric alignments. Our approach, which we call mixWe derive a detailed image formation model for the setting of holographic projection displays, as well as a multiplexing method based on a combination of phase retrieval methods and complex matrix factorization. We demonstrate several application scenarios in both simulation and physical prototypes.

Radiotracer application in determining changes in cement mix homogeneity

International Nuclear Information System (INIS)

Breda, M.

1979-01-01

A small amount of cement labelled with 24 Na is added to the concrete mix and the relative activity of the mix is measured using a scintillation detector in preset points at different time intervals of the mixing process. The detector picks up information from a volume of 10 to 15 litres. The values characterize the degree of homogeneity of the cement component in the mix. Mathematical statistics methods are used for assessing mixing or the homogeneity changes. The technique is quick and simple and is used to advantage in determining the effect of the duration and method of transport of the cement mix on its homogeneity, and in monitoring the mixing process and determining the minimum mixing time for all types of concrete mix. (M.S.)

Control of ultrafast pulses in a hydrogen-filled hollow-core photonic-crystal fiber by Raman coherence

Science.gov (United States)

Belli, F.; Abdolvand, A.; Travers, J. C.; Russell, P. St. J.

2018-01-01

We present the results of an experimental and numerical investigation into temporally nonlocal coherent interactions between ultrashort pulses, mediated by Raman coherence, in a gas-filled kagome-style hollow-core photonic-crystal fiber. A pump pulse first sets up the Raman coherence, creating a refractive index spatiotemporal grating in the gas that travels at the group velocity of the pump pulse. Varying the arrival time of a second, probe, pulse allows a high degree of control over its evolution as it propagates along the fiber through the grating. Of particular interest are soliton-driven effects such as self-compression and dispersive wave (DW) emission. In the experiments reported, a DW is emitted at ˜300 nm and exhibits a wiggling effect, with its central frequency oscillating periodically with pump-probe delay. The results demonstrate that a strong Raman coherence, created in a broadband guiding gas-filled kagome photonic-crystal fiber, can be used to control the nonlinear dynamics of ultrashort probe pulses, even in difficult-to-access spectral regions such as the deep and vacuum ultraviolet.

The 3-edge-colouring problem on the 4–8 and 3–12 lattices

International Nuclear Information System (INIS)

Fjærestad, J O

2010-01-01

We consider the problem of counting the number of 3-colourings of the edges (bonds) of the 4–8 lattice and the 3–12 lattice. These lattices are Archimedean with coordination number 3, and can be regarded as decorated versions of the square and honeycomb lattice, respectively. We solve these edge-colouring problems in the infinite-lattice limit by mapping them to other models whose solution is known. The colouring problem on the 4–8 lattice is mapped to a completely packed loop model with loop fugacity n = 3 on the square lattice, which in turn can be mapped to a 6-vertex model. The colouring problem on the 3–12 lattice is mapped to the same problem on the honeycomb lattice. The 3-edge-colouring problems on the 4–8 and 3–12 lattices are equivalent to the 3-vertex-colouring problems (and thus to the zero-temperature 3-state antiferromagnetic Potts model) on the 'square kagome' ('squagome') and 'triangular kagome' lattices, respectively

The Vertical Profile of Ocean Mixing

Science.gov (United States)

Ferrari, R. M.; Nikurashin, M.; McDougall, T. J.; Mashayek, A.

2014-12-01

The upwelling of bottom waters through density surfaces in the deep ocean is not possible unless the sloping nature of the sea floor is taken into account. The bottom--intensified mixing arising from interaction of internal tides and geostrophic motions with bottom topography implies that mixing is a decreasing function of height in the deep ocean. This would further imply that the diapycnal motion in the deep ocean is downward, not upwards as is required by continuity. This conundrum regarding ocean mixing and upwelling in the deep ocean will be resolved by appealing to the fact that the ocean does not have vertical side walls. Implications of the conundrum for the representation of ocean mixing in climate models will be discussed.

Application of an artificial neural network to ready-mixed concretes mix design

Directory of Open Access Journals (Sweden)

Setién, J.

2003-06-01

Full Text Available This paper presents the practical application of cm artificial neural network (ANN to the problem of concrete mix in a factory. After a brief introduction to the complex problem of concrete mixes design and a quick review of the fundamental basis of neurocomputation, an optimal neural network model has been developed to cope with such a problem. For training the net, several control mixes have been fabricated recording in all cases both the characteristic 28 days compressive strength and the workability measured in terms of the slump of the Abrams' cone. After the training process of the net, the power of its predictive ability is checked by comparison of the results obtained with those corresponding to four reference mixes; in this way, it is shown that the considered approach can be used in multicriterial search for optimal concrete mixes.

En este trabajo se presenta la aplicación práctica de una red neuronal artificial (ANN al problema de la dosificación de hormigones en planta. Tras una breve introducción a la compleja problemática de la dosificación de hormigones y un repaso a los fundamentos de la neurocomputación, se diseña un modelo de red neuronal óptimo para abordar el problema. Para entrenar dicha red, se realizan varias amasadas de prueba, registrándose para cada una de ellas la trabajabilidad, mediante la medida del asiento del cono de Abrams, y ¡a resistencia característica a los 28 días. Una vez entrenada la red, se pone a prueba su carácter predictivo comparando los resultados que proporciona con los de cuatro amasadas de referencia, demostrándose que esta aproximación puede ser utilizada como método multicriterial para la obtención de mezclas óptimas de hormigón.

9 CFR 114.6 - Mixing biological products.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Mixing biological products. 114.6... BIOLOGICAL PRODUCTS § 114.6 Mixing biological products. Each biological product, when in liquid form, shall be mixed thoroughly in a single container. During bottling operations, the product shall be...

Neutrino mixing and big bang nucleosynthesis

Science.gov (United States)

Bell, Nicole

2003-04-01

We analyse active-active neutrino mixing in the early universe and show that transformation of neutrino-antineutrino asymmetries between flavours is unavoidable when neutrino mixing angles are large. This process is a standard Mikheyev-Smirnov-Wolfenstein flavour transformation, modified by the synchronisation of momentum states which results from neutrino-neutrino forward scattering. The new constraints placed on neutrino asymmetries eliminate the possibility of degenerate big bang nucleosynthesis.Implications of active-sterile neutrino mixing will also be reviewed.

Theory of soil decontamination in mixing liquid

International Nuclear Information System (INIS)

Polyakov, A.S.; Emets, E.P.; Poluehktov, P.P.; Rybakov, K.A.

1997-01-01

The theory of soil decontamination from radioactive pollution in mixing liquid flow is described. It is shown that there exists the threshold intensity of liquid mixing up to which there is no decontamination. Beyond the threshold and by increasing the mixing intensity the decontamination of large soil fractions is allowable whereby the higher is the mixing intensity and lower is the soil contamination, the laser is the characteristic decontamination time. The above theory is related to cases of uniform pollution of the particles surface

21 CFR 163.145 - Mixed dairy product chocolates.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Mixed dairy product chocolates. 163.145 Section... § 163.145 Mixed dairy product chocolates. (a) Description. Mixed dairy product chocolates are the foods...; or (iv) Malted milk; and (2) The finished mixed dairy product chocolates shall contain not less than...

Prevalence of congenital heart disease in 76,301 mixed-breed dogs and 57,025 mixed-breed cats.

Science.gov (United States)

Schrope, Donald P

2015-09-01

Assess the prevalence of congenital heart disease (CHD) in a large population of mixed-breed dogs and cats. 76,301 mixed-breed dogs and 57,025 mixed-breed cats. Retrospective review of records and examinations based on specified diagnostic criteria. Among mixed-breed dogs, the prevalence of CHD was 0.13% (51.4% female) and of innocent murmurs was 0.10% (53.0% male). Pulmonic stenosis was the most common defect followed by patent ductus arteriosus, aortic stenosis, and ventricular septal defect. Among mixed-breed cats, prevalence of CHD was 0.14% (55.2% male) and of innocent murmurs was 0.16% (54.4% male). When the 25 cats with dynamic left or right ventricular outflow obstruction were counted with cases of innocent murmurs, the overall prevalence was 0.2%. Ventricular septal defects were the most common feline CHD followed closely by aortic stenosis and hypertrophic obstructive cardiomyopathy. There was no overall sex predilection for CHD in mixed-breed cats or dogs, and no significant difference in CHD prevalence between cats or dogs. Among dogs, subvalvular aortic stenosis and mitral valve dysplasia had a male predisposition while patent ductus arteriosus had a female predisposition. Among cats, valvular pulmonic stenosis, subvalvular and valvular aortic stenosis, and ventricular septal defects had a male predisposition while pulmonary artery stenosis had a female predisposition. The prevalence of CHD in a mixed-breed dogs and cats is lower than for prior studies, perhaps due to the lack of purebreds in the study population or actual changes in disease prevalence. Copyright © 2015 Elsevier B.V. All rights reserved.

Linear and Generalized Linear Mixed Models and Their Applications

CERN Document Server

Jiang, Jiming

2007-01-01

This book covers two major classes of mixed effects models, linear mixed models and generalized linear mixed models, and it presents an up-to-date account of theory and methods in analysis of these models as well as their applications in various fields. The book offers a systematic approach to inference about non-Gaussian linear mixed models. Furthermore, it has included recently developed methods, such as mixed model diagnostics, mixed model selection, and jackknife method in the context of mixed models. The book is aimed at students, researchers and other practitioners who are interested

Experiments on scalar mixing and transport

International Nuclear Information System (INIS)

Warhaft, Z.

1993-01-01

The author provides an overview of his recent work on passive (temperature) scalar mixing in both homogeneous and inhomogeneous turbulent flows. He shows that for homogeneous grid generated turbulence, in the presence of a linear temperature profile, the probability density function (pdf) of the temperature fluctuations has broad exponential tails, while the pdf of velocity is Gaussian. However, in the absence of a scalar gradient the pdf of temperature is Gaussian. This new result sheds insight into the fundamentals of turbulent mixing as well as to the nature of the velocity field. It is also shown that the spectrum of the temperature fluctuations has a scaling region that is consistent with Kolmogorov scaling although a similar scaling region is absent for the velocity field in this low Reynolds number flow. Finally, results concerning the mixing and dispersion of scalars in a jet are shown. Although initially the scalar mixing is strongly dependent on input conditions, the mixing is shown to be rapid and the correlation coefficient asymptotes to unity by x/D ∼ 20

Soil mixing of stratified contaminated sands.

Science.gov (United States)

Al-Tabba, A; Ayotamuno, M J; Martin, R J

2000-02-01

Validation of soil mixing for the treatment of contaminated ground is needed in a wide range of site conditions to widen the application of the technology and to understand the mechanisms involved. Since very limited work has been carried out in heterogeneous ground conditions, this paper investigates the effectiveness of soil mixing in stratified sands using laboratory-scale augers. This enabled a low cost investigation of factors such as grout type and form, auger design, installation procedure, mixing mode, curing period, thickness of soil layers and natural moisture content on the unconfined compressive strength, leachability and leachate pH of the soil-grout mixes. The results showed that the auger design plays a very important part in the mixing process in heterogeneous sands. The variability of the properties measured in the stratified soils and the measurable variations caused by the various factors considered, highlighted the importance of duplicating appropriate in situ conditions, the usefulness of laboratory-scale modelling of in situ conditions and the importance of modelling soil and contaminant heterogeneities at the treatability study stage.

Statistical models of global Langmuir mixing

Science.gov (United States)

Li, Qing; Fox-Kemper, Baylor; Breivik, Øyvind; Webb, Adrean

2017-05-01

The effects of Langmuir mixing on the surface ocean mixing may be parameterized by applying an enhancement factor which depends on wave, wind, and ocean state to the turbulent velocity scale in the K-Profile Parameterization. Diagnosing the appropriate enhancement factor online in global climate simulations is readily achieved by coupling with a prognostic wave model, but with significant computational and code development expenses. In this paper, two alternatives that do not require a prognostic wave model, (i) a monthly mean enhancement factor climatology, and (ii) an approximation to the enhancement factor based on the empirical wave spectra, are explored and tested in a global climate model. Both appear to reproduce the Langmuir mixing effects as estimated using a prognostic wave model, with nearly identical and substantial improvements in the simulated mixed layer depth and intermediate water ventilation over control simulations, but significantly less computational cost. Simpler approaches, such as ignoring Langmuir mixing altogether or setting a globally constant Langmuir number, are found to be deficient. Thus, the consequences of Stokes depth and misaligned wind and waves are important.

The crack growth mechanism in asphaltic mixes

NARCIS (Netherlands)

Jacobs, M.M.J.; Hopman, P.C.; Molenaar, A.A.A.

1995-01-01

The crack growth mechanism in asphalt concrete (Ac) mixes is studied. In cyclic tests on several asphaltic mixes crack growth is measured, both with crack foils and with cOD-gauges. It is found that crack growth in asphaltic mixes is described by three processes which are parallel in time: cohesive

Patch testing with the "sesquiterpene lactone mix"

DEFF Research Database (Denmark)

Ducombs, G; Benezra, C; Talaga, P

1990-01-01

6278 patients were patch tested with a sesquiterpene lactone mix (SL-mix) in 10 European clinics. 4011 patients were tested only with 0.1% SL-mix, 63 (approximately 1.5%) of whom were positive, with 26 (41%) of these cases being considered clinically relevant. There were no cases of active...

Mixed ice accretion on aircraft wings

Science.gov (United States)

Janjua, Zaid A.; Turnbull, Barbara; Hibberd, Stephen; Choi, Kwing-So

2018-02-01

Ice accretion is a problematic natural phenomenon that affects a wide range of engineering applications including power cables, radio masts, and wind turbines. Accretion on aircraft wings occurs when supercooled water droplets freeze instantaneously on impact to form rime ice or runback as water along the wing to form glaze ice. Most models to date have ignored the accretion of mixed ice, which is a combination of rime and glaze. A parameter we term the "freezing fraction" is defined as the fraction of a supercooled droplet that freezes on impact with the top surface of the accretion ice to explore the concept of mixed ice accretion. Additionally we consider different "packing densities" of rime ice, mimicking the different bulk rime densities observed in nature. Ice accretion is considered in four stages: rime, primary mixed, secondary mixed, and glaze ice. Predictions match with existing models and experimental data in the limiting rime and glaze cases. The mixed ice formulation however provides additional insight into the composition of the overall ice structure, which ultimately influences adhesion and ice thickness, and shows that for similar atmospheric parameter ranges, this simple mixed ice description leads to very different accretion rates. A simple one-dimensional energy balance was solved to show how this freezing fraction parameter increases with decrease in atmospheric temperature, with lower freezing fraction promoting glaze ice accretion.

Lateral Mixing

Science.gov (United States)

2014-09-30

negative (right panel c) and the kinetic energy dissipation is larger than that expected from meterological forcing alone (right panel a). This is...10.1002/grl.50919. Shcherbina, A. et al., 2014, The LatMix Summer Campaign: Submesoscale Stirring in the Upper Ocean., Bull. American Meterological

Colour mixing based on daylight

International Nuclear Information System (INIS)

Meyn, Jan-Peter

2008-01-01

Colour science is based on the sensation of monochromatic light. In contrast to that, surface colours are caused by reflection of wide sections of the daylight spectrum. Non-spectral colours like magenta and purple appear homologous to colours with spectral hue, if the approach of mixing monochromatic light is abandoned. It is shown that a large region of the colour space can be covered by mixing three primary colours derived from lossless spectral decomposition of daylight. These primaries are specified by hue, saturation and luminosity. Duality of additive and subtractive mixing is formulated quantitatively. Experimental demonstrations of calculated results are suggested. This paper is intended for undergraduate optics courses, and advanced interdisciplinary seminars on arts and physics

Transverse mixing of ellipsoidal particles in a rotating drum

Directory of Open Access Journals (Sweden)

He Siyuan

2017-01-01

Full Text Available Rotating drums are widely used in industry for mixing, milling, coating and drying processes. In the past decades, mixing of granular materials in rotating drums has been extensively investigated, but most of the studies are based on spherical particles. Particle shape has an influence on the flow behaviour and thus mixing behaviour, though the shape effect has as-yet received limited study. In this work, discrete element method (DEM is employed to study the transverse mixing of ellipsoidal particles in a rotating drum. The effects of aspect ratio and rotating speed on mixing quality and mixing rate are investigated. The results show that mixing index increases exponentially with time for both spheres and ellipsoids. Particles with various aspect ratios are able to reach well-mixed states after sufficient revolutions in the rolling or cascading regime. Ellipsoids show higher mixing rate when rotational speed is set between 25 and 40 rpm. The relationship between mixing rate and aspect ratio of ellipsoids is established, demonstrating that, particles with aspect ratios of 0.5 and 2.0 achieve the highest mixing rates. Increasing rotating speed from 15 rpm to 40 rpm does not necessarily increase the mixing speed of spheres, while monotonous increase is observed for ellipsoids.

Mixed problem with integral boundary condition for a high order mixed type partial differential equation

OpenAIRE

M. Denche; A. L. Marhoune

2003-01-01

In this paper, we study a mixed problem with integral boundary conditions for a high order partial differential equation of mixed type. We prove the existence and uniqueness of the solution. The proof is based on energy inequality, and on the density of the range of the operator generated by the considered problem.

Potential of an asymmetrical agitation in industrial mixing

Directory of Open Access Journals (Sweden)

Kazuhiko Nishi

2013-10-01

Full Text Available Mixing is one of the most fundamental operations in chemical engineering. Stirred tanks are widely used in the manufacture of such materials as chemicals, paints, inks, electronics materials, ceramics, foods, pharmaceuticals and cosmetics. Suitable mixing is indispensable to the purpose achievement of a process. Eccentric mixing, in which an impeller installed at eccentric position in a vessel, is one of the traditional methods of promoting mixing. An asymmetrical flow which occurs in vessel is complicated, and it promotes mixing, distribution, and mass transfer. In this study, a new mixing method which eccentric mixing using a large type impeller which attracts attention in recent years is shown. The high performance of a large impeller can be combined with the advantages of an eccentric impeller by using the impeller at an eccentric position. The power consumption and mixing time for MAXBLEND, which is a type of large impeller, were investigated. The power consumption, P, and mixing time, θM, were measured under various eccentric conditions. The relation between the power number (Np and Reynolds number (Re and that between the dimensionless mixing time (nθM and Re were investigated. When eccentric mixing is used industrially, we should be concerned about the horizontal load to a agitating shaft. The large oscillating horizontal load causes serious problems, such as the falling off of the impeller or the breakage of the motor, mechanical seal or gearbox. It is, therefore, important to understand the relation between these values and the impeller rotational speed when designing the mixing equipment and determining the operating conditions. In this study, the torque and horizontal load were measured in eccentric mixing under various eccentric conditions. The averages of both, the torque and the horizontal load, and their standard deviations, corresponding to the amplitude of fluctuation, were shown.Doi: 10.12777/ijse.5.2.73-80 [How to cite this

Tri-maximal vs. bi-maximal neutrino mixing

International Nuclear Information System (INIS)

Scott, W.G

2000-01-01

It is argued that data from atmospheric and solar neutrino experiments point strongly to tri-maximal or bi-maximal lepton mixing. While ('optimised') bi-maximal mixing gives an excellent a posteriori fit to the data, tri-maximal mixing is an a priori hypothesis, which is not excluded, taking account of terrestrial matter effects

7 CFR 29.1167 - Mixed (M Group).

Science.gov (United States)

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Mixed (M Group). 29.1167 Section 29.1167 Agriculture... INSPECTION Standards Grades § 29.1167 Mixed (M Group). This group consists of tobacco from three or more groups or two distinctly different groups which are mixed together in various combinations. Grades, Grade...

MARKETING MIX: AN ATTEMPT AT CRITICAL ANALYSIS

OpenAIRE

Kotliarov I.D.

2012-01-01

The present paper contains an analysis of main directions of evolution of marketing mix concept. Typical problems of each approach are demonstrated. Classical form of marketing mix (4Ps) is recommended as the basic form of marketing mix, which, however, may be adapted to specific characteristics of the firm and its industry

Geoelectrical signatures of reactive mixing

Science.gov (United States)

Ghosh, U.; Bandopadhyay, A.; Jougnot, D.; Le Borgne, T.; Meheust, Y.

2017-12-01

Characterizing the effects of fluid mixing on geochemical reactions in the subsurface is of paramount importance owing to their pivotal role in processes such as contaminant migration or aquifer remediation, to name a few [1]. Large velocity gradients in the porous media are expected to lead to enhanced diffusive mixing accompanied by augmented reaction rates [2]. Despite its importance, accurate monitoring of such processes still remains an open challenge, mainly due to the opacity of the medium and to the lack of access to it. However, in recent years, geophysical methods based on electrical conductivity and polarization have come up as a promising tool for mapping and monitoring such reactions in the subsurface. In this regard, one of the main challenges is to properly characterize the multiple sources of electrical signals and in particular isolate the influence of reactive mixing on the electrical conductivity from those of other sources [3]. In this work, we explore the coupling between fluid mixing, reaction and charge migration in porous media to evaluate the potential of obtaining a spatially-resolved measurement of local reaction rates in the subsurface from electrical measurements. To this end, we employ a lamellar description of the mixing interface [4] with novel semi-analytical upscaling techniques to quantify changes in electrical conductivity induced by chemical reactions across mixing fronts. The changes in electrical conductivity are strongly dependent on the concentration of ionic species as well as on the polarization of the pore (water) solution around the grains, which in turn are controlled by local reaction rates and, consequently, by the local velocity gradients. Hence, our results essentially suggest that local variations in the electrical conductivity may be quantitatively related to the mixing and reaction dynamics, and thus be used as a measurement tool to characterize these dynamics. References 1. M. Dentz, T. Le Borgne, A. Englert

Commensurability, chaos, and the devil's staircase

International Nuclear Information System (INIS)

Bak, P.; Jensen, M.H.

1984-01-01

These lectures deal with the effects of the discrete lattice on modulated structures in solid state physics. The modulated structure could be a periodic lattice distortion, a sinusoidal or helical magnetic structure, stagging of alkali metals in graphite intercalation compounds, polytypism in crystal formation, or some other periodic arrangement

Ion beam mixing in Ag-Pd alloys

International Nuclear Information System (INIS)

Klatt, J.L.; Averback, R.S.; Peak, D.

1989-01-01

Ion beam mixing during 750 keV Kr + irradiation at 80 K was measured on a series of Ag-Pd alloys using Au marker atoms. The mixing in pure Ag was the greatest and it decreased monotonically with increasing Pd content, being a factor of 10 higher in pure Ag than in pure Pd. This large difference in mixing cannot be explained by the difference in cohesion energy between Ag and Pd in the thermodynamic model of ion beam mixing proposed by Johnson et al. [W. L. Johnson, Y. T. Cheng, M. Van Rossum, and M-A. Nicolet, Nucl. Instrum. Methods B 7/8, 657 (1985)]. An alternative model based on local melting in the cascade is shown to account for the ion beam mixing results in Ag and Pd

Intermarriage, children of mixed parentage and mental health

DEFF Research Database (Denmark)

Singla, Rashmi; Bang, Helene

in the mixed parentage population. The terms ‘mixed parentage’; ‘biracial’, ‘mixed ethnicity’ are used to describe offspring of parents of different ‘races’/ ethnicity. Identity formation is crucial for mixed parentage children who challenge the ‘white /black binary’ and essentialising of the ‘race’, which has...... recently received increasing attention in the UK and the USA. This paper deals primarily with the mental health with focus on the identity formation among mixed parentage children, although most manage to achieve integrated identities, some experience identity conflicts. The latter pose a growing challenge...

7 CFR 29.1036 - Mixed Group (M).

Science.gov (United States)

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Mixed Group (M). 29.1036 Section 29.1036 Agriculture... Type 92) § 29.1036 Mixed Group (M). This group consists of tobacco from three or more groups or two distinctly different groups which are mixed together in various combinations. [49 FR 16755, Apr. 20, 1984...

What is so new about mixed methods?

Science.gov (United States)

Pelto, Pertti J

2015-06-01

In this article, I dispute claims that mixed methods research emerged only recently in the social sciences. I argue that some anthropologists and sociologists (and others) have used mixed methods in fieldwork for at least 80 years, and there are studies from early in the 20th century that clearly fall within the definition of "mixed methods." I explore some of the history of the mixing of qualitative and quantitative data in earlier ethnographic works and show that in some sectors of social science research, the "emergence" and proliferation of mixed methods were particularly notable around the middle of the 20th century. Furthermore, concerning issues about "paradigms of research" in the social sciences, I identify some of the types of research in which the mixing of QUAL and QUAN approaches was more likely to occur. I suggest that some of the literature about research paradigms has involved a certain amount of "myth-making" in connection with descriptions of qualitative and quantitative research assumptions and styles. © The Author(s) 2015.

Chaotic Fluid Mixing in Crystalline Sphere Arrays

Science.gov (United States)

Turuban, R.; Lester, D. R.; Le Borgne, T.; Méheust, Y.

2017-12-01

We study the Lagrangian dynamics of steady 3D Stokes flow over simple cubic (SC) and body-centered cubic (BCC) lattices of close-packed spheres, and uncover the mechanisms governing chaotic mixing. Due to the cusp-shaped sphere contacts, the topology of the skin friction field is fundamentally different to that of continuous (non-granular) media (e.g. open pore networks), with significant implications for fluid mixing. Weak symmetry breaking of the flow orientation with respect to the lattice symmetries imparts a transition from regular to strong chaotic mixing in the BCC lattice, whereas the SC lattice only exhibits weak mixing. Whilst the SC and BCC lattices share the same symmetry point group, these differences are explained in terms of their space groups, and we find that a glide symmetry of the BCC lattice generates chaotic mixing. These insight are used to develop accurate predictions of the Lyapunov exponent distribution over the parameter space of mean flow orientation, and point to a general theory of mixing and dispersion based upon the inherent symmetries of arbitrary crystalline structures.

Mixed phase clouds: observations and theoretical advances (overview)

Science.gov (United States)

Korolev, Alexei

2013-04-01

Mixed phase clouds play important role in precipitation formation and radiation budget of the Earth. The microphysical measurements in mixed phase clouds are notoriously difficult due to many technical challenges. The airborne instrumentation for characterization of the microstructure of mixed phase clouds is discussed. The results multiyear airborne observations and measurements of frequency of occurrence of mixed phase, characteristic spatial scales, humidity in mixed phase and ice clouds are presented. A theoretical framework describing the thermodynamics and phase transformation of a three phase component system consisting of ice particles, liquid droplets and water vapor is discussed. It is shown that the Wegener-Bergeron-Findeisen process plays different role in clouds with different dynamics. The problem of maintenance and longevity of mixed phase clouds is discussed.

Benign mixed tumor of the lacrimal sac

Directory of Open Access Journals (Sweden)

Jong-Suk Lee

2015-01-01

Full Text Available Neoplasms of the lacrimal drainage system are uncommon, but potentially life-threatening and are often difficult to diagnose. Among primary lacrimal sac tumors, benign mixed tumors are extremely rare. Histologically, benign mixed tumors have been classified as a type of benign epithelial tumor. Here we report a case of benign mixed tumor of the lacrimal sac.

Effect of mix parameters on longevity of bituminous mixtures

Science.gov (United States)

Reichle, Clayton Matthew

This study was performed to evaluate the effects of varying aggregate sources, aggregate gradations on the stripping and rutting potential of bituminous based plant mixes specified by the Missouri Department of Transportation. The different aggregate combinations included two different aggregate sources (Potosi Dolomite and Jefferson City Dolomite) including two variations for the Jefferson City Dolomite mix to simulate a marginally in-specification mix and an out-of-specification but in-field tolerance mix. The "field" mix simulated the marginal mix where field tolerance of high dust and low binder content were maximized. All three mixes were evaluated for stripping susceptibility using the Tensile Strength Ratio (TSR) test and the Hamburg Wheel Tracking Device (HWTD). The mix characteristics (unit weight, effective binder content, and air voids) were used for a Level 3 analysis in the Mechanistic-Empirical Pavement Design Guide (MEPDG) to determine long term pavement distress conditions such as fatigue cracking, rutting, and IRI (smoothness). The Potosi mix exhibited the best resistance to rutting and stripping during both the TSR testing as well as the Hamburg testing. The Jefferson City In-Spec and Out-of-Spec mixes showed less resistance to rutting and stripping in order, respectively. This was expected for the Jefferson City mixes where the aggregate was of lower quality (higher Los Angeles Abrasion, Micro Deval loss, absorption, and deleterious materials). Also, in the case of the Jefferson City Out-of-Spec mix, the binder content was lower. Upon evaluating the mixes using the MEPDG software, it was shown that mix characteristics such as air voids, VMA, and VFA influenced the fatigue cracking, rutting, and IRI predictions to a minor degree.

Z' boson mixings with Z-γ and charge assignments

International Nuclear Information System (INIS)

Zhang Ying; Wang Qing

2009-01-01

Based on the general description for Z'-Z-γ mixing as derived from the electroweak chiral Lagrangian, we characterize and classify the various new physics models involving the Z' boson that have appeared in the literature into five classes: 1. Models with minimal Z'-Z mass mixing; 2. Models with minimal Z'-Z kinetic mixing; 3. Models with general Z'-Z mixing; 4. Models with Z'-γ kinetic and Z'-Z mixing; and 5. Models with Stueckelberg-type mixing. The corresponding mixing matrices are explicitly evaluated for each of these classes. We constrain and classify the Z' boson charges with respect to quark-leptons by anomaly cancellation conditions.

Gas-mixing system for drift chambers using solenoid valves

International Nuclear Information System (INIS)

Cooper, W.E.; Sugano, K.; Trentlage, D.B.

1983-04-01

We describe an inexpensive system for mixing argon and ethane drift chamber gas which is used for the E-605 experiment at Fermilab. This system is based on the idea of intermittent mixing of gases with fixed mixing flow rates. A dual-action pressure switch senses the pressure in a mixed gas reservoir tank and operates solenoid valves to control mixing action and regulate reservoir pressure. This system has the advantages that simple controls accurately regulate the mixing ratio and that the mixing ratio is nearly flow rate independent. We also report the results of the gas analysis of various samplings, and the reliability of the system in long-term running

Natural maximal νμ-ντ mixing

International Nuclear Information System (INIS)

Wetterich, C.

1999-01-01

The naturalness of maximal mixing between myon- and tau-neutrinos is investigated. A spontaneously broken nonabelian generation symmetry can explain a small parameter which governs the deviation from maximal mixing. In many cases all three neutrino masses are almost degenerate. Maximal ν μ -ν τ -mixing suggests that the leading contribution to the light neutrino masses arises from the expectation value of a heavy weak triplet rather than from the seesaw mechanism. In this scenario the deviation from maximal mixing is predicted to be less than about 1%. (Copyright (c) 1999 Elsevier Science B.V., Amsterdam. All rights reserved.)

Flapping model of scalar mixing in turbulence

International Nuclear Information System (INIS)

Kerstein, A.R.

1991-01-01

Motivated by the fluctuating plume model of turbulent mixing downstream of a point source, a flapping model is formulated for application to other configurations. For the scalar mixing layer, simple expressions for single-point scalar fluctuation statistics are obtained that agree with measurements. For a spatially homogeneous scalar mixing field, the family of probability density functions previously derived using mapping closure is reproduced. It is inferred that single-point scalar statistics may depend primarily on large-scale flapping motions in many cases of interest, and thus that multipoint statistics may be the principal indicators of finer-scale mixing effects

An Introduction to LANL Mixed Potential Sensors

Energy Technology Data Exchange (ETDEWEB)

Mukundan, Rangachary [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Brosha, Eric Lanich [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Kreller, Cortney [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2015-01-26

These are slides for a webinar given on the topics of an introduction to LANL mixed potential sensors. Topics include the history of LANL electrochemical sensor work, an introduction to mixed potential sensors, LANL uniqueness, and an application of LANL mixed potential sensors. The summary is as follows: Improved understanding of the mixed-potential sensor mechanism (factors controlling the sensor response identified), sensor design optimized to maximize sensor sensitivity and durability (porous electrolyte/dense electrodes), electrodes selected for various specific applications (CO, HC, H₂), sensor operating parameters optimized for improved gas selectivity (NO_x, NH₃).

Using multiscale norms to quantify mixing and transport

International Nuclear Information System (INIS)

Thiffeault, Jean-Luc

2012-01-01

Mixing is relevant to many areas of science and engineering, including the pharmaceutical and food industries, oceanography, atmospheric sciences and civil engineering. In all these situations one goal is to quantify and often then to improve the degree of homogenization of a substance being stirred, referred to as a passive scalar or tracer. A classical measure of mixing is the variance of the concentration of the scalar, which is the L 2 norm of a mean-zero concentration field. Recently, other norms have been used to quantify mixing, in particular the mix-norm as well as negative Sobolev norms. These norms have the advantage that unlike variance they decay even in the absence of diffusion, and their decay corresponds to the flow being mixing in the sense of ergodic theory. General Sobolev norms weigh scalar gradients differently, and are known as multiscale norms for mixing. We review the applications of such norms to mixing and transport, and show how they can be used to optimize the stirring and mixing of a decaying passive scalar. We then review recent work on the less-studied case of a continuously replenished scalar field—the source–sink problem. In that case the flows that optimally reduce the norms are associated with transport rather than mixing: they push sources onto sinks, and vice versa. (invited article)

Jet mixing long horizontal storage tanks

International Nuclear Information System (INIS)

Perona, J.J.; Hylton, T.D.; Youngblood, E.L.; Cummins, R.L.

1994-12-01

Large storage tanks may require mixing to achieve homogeneity of contents for several reasons: prior to sampling for mass balance purposes, for blending in reagents, for suspending settled solids for removal, or for use as a feed tank to a process. At ORNL, mixed waste evaporator concentrates are stored in 50,000-gal tanks, about 12 ft in diameter and 60 ft long. This tank configuration has the advantage of permitting transport by truck and therefore fabrication in the shop rather than in the field. Jet mixing experiments were carried out on two model tanks: a 230-gal (1/6-linear-scale) Plexiglas tank and a 25,000-gal tank (about 2/3 linear scale). Mixing times were measured using sodium chloride tracer and several conductivity probes distributed through the tanks. Several jet sizes and configurations were tested. One-directional and two-directional jets were tested in both tanks. Mixing times for each tank were correlated with the jet Reynolds number. Mixing times were correlated for the two tank sizes using the recirculation time for the developed jet. When the recirculation times were calculated using the distance from the nozzle to the end of the tank as the length of the developed jet, the correlation was only marginally successful. Data for the two tank sizes were correlated empirically using a modified effective jet length expressed as a function of the Reynolds number raised to the 1/3 power. Mixing experiments were simulated using the TEMTEST computer program. The simulations predicted trends correctly and were within the scatter of the experimental data with the lower jet Reynolds numbers. Agreement was not as good at high Reynolds numbers except for single nozzles in the 25,000-gal tank, where agreement was excellent over the entire range

Modeling of particle mixing in the atmosphere

International Nuclear Information System (INIS)

Zhu, Shupeng

2015-01-01

This thesis presents a newly developed size-composition resolved aerosol model (SCRAM), which is able to simulate the dynamics of externally-mixed particles in the atmosphere, and evaluates its performance in three-dimensional air-quality simulations. The main work is split into four parts. First, the research context of external mixing and aerosol modelling is introduced. Secondly, the development of the SCRAM box model is presented along with validation tests. Each particle composition is defined by the combination of mass-fraction sections of its chemical components or aggregates of components. The three main processes involved in aerosol dynamic (nucleation, coagulation, condensation/ evaporation) are included in SCRAM. The model is first validated by comparisons with published reference solutions for coagulation and condensation/evaporation of internally-mixed particles. The particle mixing state is investigated in a 0-D simulation using data representative of air pollution at a traffic site in Paris. The relative influence on the mixing state of the different aerosol processes and of the algorithm used to model condensation/evaporation (dynamic evolution or bulk equilibrium between particles and gas) is studied. Then, SCRAM is integrated into the Polyphemus air quality platform and used to conduct simulations over Greater Paris during the summer period of 2009. This evaluation showed that SCRAM gives satisfactory results for both PM2.5/PM10 concentrations and aerosol optical depths, as assessed from comparisons to observations. Besides, the model allows us to analyze the particle mixing state, as well as the impact of the mixing state assumption made in the modelling on particle formation, aerosols optical properties, and cloud condensation nuclei activation. Finally, two simulations are conducted during the winter campaign of MEGAPOLI (Megacities: Emissions, urban, regional and Global Atmospheric Pollution and climate effects, and Integrated tools for

Nuclear level mixing resonance spectroscopy

International Nuclear Information System (INIS)

Coussement, R.; Put, P.; Scheveneels, G.; Hardeman, F.

1985-01-01

The existent methods for measuring quadrupole interactions are not suited to nuclei with lifetimes in the micro-seconds to minutes region. AD/NQR, a possible candidate in this lifetime gap, has not yet succeeded in overcoming its predicted difficulties. A new resonant method, recently developed and based on the principles of level mixing (cfr atomic spectroscopy) covers this less accessible lifetime range. Many other kinds of resonances can be described according to the level mixing formalism. The particular example of NMR as a level mixing resonance (LMR) is discussed. The underlying theory of LMR and its important consequences, leading to some interesting features of the method, is briefly formulated. Two successfully performed measurements demonstrate the feasibility and the predicted characteristics of this new promising method. (orig.)

Mixed-mode fracture of ceramics

Energy Technology Data Exchange (ETDEWEB)

Petrovic, J.J.

1985-01-01

The mixed-mode fracture behavior of ceramic materials is of importance for monolithic ceramics in order to predict the onset of fracture under generalized loading conditions and for ceramic composites to describe crack deflection toughening mechanisms. Experimental data on surface flaw mixed-mode fracture in various ceramics indicate that the flaw-plane normal stress at fracture decreases with increasing in-flaw-plane shear stress, although present data exhibit a fairly wide range in details of this sigma - tau relationship. Fracture from large cracks suggests that Mode II has a greater effect on Mode I fracture than Mode III. A comparison of surface flaw and large crack mixed-mode I-II fracture responses indicated that surface flaw behavior is influenced by shear resistance effects.

Mixed Methods Research Prevalence Studies: Field-Specific Studies on the State of the Art of Mixed Methods Research

OpenAIRE

Molina-Azorín, José F.; Fetters, Michael D.

2016-01-01

The Journal of Mixed Methods Research (JMMR) has always welcomed two main kinds of manuscripts: original empirical articles and methodological/theoretical articles (Creswell & Tashakkori, 2007; Fetters & Freshwater, 2015a; Mertens, 2011). Both types of articles must clearly state methodological aims, review mixed methods literature relative to the methodological aim, and advance the field of mixed methods—empirical articles must address integration (Fetters & Freshwater, 2015b). In this edito...

Mixed mobile ion effect in fluorozincate glasses

International Nuclear Information System (INIS)

Ghosh, S; Ghosh, A

2005-01-01

The mixed mobile ion effect has been investigated for the first time in zinc fluoride glasses where in addition to alkali cations fluorine anions also participate in the diffusion process, unlike mixed alkali oxide glasses. The minimum in the conductivity, conductivity relaxation frequency, crossover frequency and decoupling index indicates the existence of the mixed mobile ion effect in these fluoride glasses. It has been observed that the non-exponential parameter and the frequency exponent are independent of temperature. It has been established that alkali ions and fluorine anions exhibit lower dimensionality of the conduction pathways in mixed alkali zinc fluoride glasses than that in the single alkali lithium based zinc fluoride glasses while they are migrating. From the scaling of the conductivity spectra, it has been established that the relaxation dynamics in mixed alkali zinc fluoride glasses is independent of temperature and composition

A review of warm mix asphalt.

Science.gov (United States)

2008-12-01

Warm Mix Asphalt (WMA) technology, recently developed in Europe, is gaining strong interest in the US. By : lowering the viscosity of asphalt binder and/or increasing the workability of mixture using minimal heat, WMA : technology allows the mixing, ...

Marketingový mix ve vybrané firmě

OpenAIRE

HONSOVÁ, Eva

2014-01-01

The aim of this work is to analyse marketing mix in the selected company. Based on the analysis there was created a plan of how to improve the current marketing mix. The theoretical part of my paper contains general theoretical background of marketing and especially the marketing mix. The marketing mix includes four marketing tools (Product, Price, Place, Promotion), which are generally referred to as 4P.

Mixed Movements

DEFF Research Database (Denmark)

Brabrand, Helle

2010-01-01

levels than those related to building, and this exploration is a special challenge and competence implicit artistic development work. The project Mixed Movements generates drawing-material, not primary as representation, but as a performance-based media, making the body being-in-the-media felt and appear...... as possible operational moves....

Mixing with applications to inertial-confinement-fusion implosions

Science.gov (United States)

Rana, V.; Lim, H.; Melvin, J.; Glimm, J.; Cheng, B.; Sharp, D. H.

2017-01-01

Approximate one-dimensional (1D) as well as 2D and 3D simulations are playing an important supporting role in the design and analysis of future experiments at National Ignition Facility. This paper is mainly concerned with 1D simulations, used extensively in design and optimization. We couple a 1D buoyancy-drag mix model for the mixing zone edges with a 1D inertial confinement fusion simulation code. This analysis predicts that National Ignition Campaign (NIC) designs are located close to a performance cliff, so modeling errors, design features (fill tube and tent) and additional, unmodeled instabilities could lead to significant levels of mix. The performance cliff we identify is associated with multimode plastic ablator (CH) mix into the hot-spot deuterium and tritium (DT). The buoyancy-drag mix model is mode number independent and selects implicitly a range of maximum growth modes. Our main conclusion is that single effect instabilities are predicted not to lead to hot-spot mix, while combined mode mixing effects are predicted to affect hot-spot thermodynamics and possibly hot-spot mix. Combined with the stagnation Rayleigh-Taylor instability, we find the potential for mix effects in combination with the ice-to-gas DT boundary, numerical effects of Eulerian species CH concentration diffusion, and ablation-driven instabilities. With the help of a convenient package of plasma transport parameters developed here, we give an approximate determination of these quantities in the regime relevant to the NIC experiments, while ruling out a variety of mix possibilities. Plasma transport parameters affect the 1D buoyancy-drag mix model primarily through its phenomenological drag coefficient as well as the 1D hydro model to which the buoyancy-drag equation is coupled.

Treatment recommendations for DSM-5-defined mixed features.

Science.gov (United States)

Rosenblat, Joshua D; McIntyre, Roger S

2017-04-01

The Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition (DSM-5) mixed features specifier provides a less restrictive definition of mixed mood states, compared to the Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition, Text Revision (DSM-IV-TR), including mood episodes that manifest with subthreshold symptoms of the opposite mood state. A limited number of studies have assessed the efficacy of treatments specifically for DSM-5-defined mixed features in mood disorders. As such, there is currently an inadequate amount of data to appropriately inform evidence-based treatment guidelines of DSM-5 defined mixed features. However, given the high prevalence and morbidity of mixed features, treatment recommendations based on the currently available evidence along with expert opinion may be of benefit. This article serves to provide these interim treatment recommendations while humbly acknowledging the limited amount of evidence currently available. Second-generation antipsychotics (SGAs) appear to have the greatest promise in the treatment of bipolar disorder (BD) with mixed features. Conventional mood stabilizing agents (ie, lithium and divalproex) may also be of benefit; however, they have been inadequately studied. In the treatment of major depressive disorder (MDD) with mixed features, the comparable efficacy of antidepressants versus other treatments, such as SGAs, remains unknown. As such, antidepressants remain first-line treatment of MDD with or without mixed features; however, there are significant safety concerns associated with antidepressant monotherapy when mixed features are present, which merits increased monitoring. Lurasidone is the only SGA monotherapy that has been shown to be efficacious specifically in the treatment of MDD with mixed features. Further research is needed to accurately determine the efficacy, safety, and tolerability of treatments specifically for mood episodes with mixed features to adequately inform

Determining how much mixed waste will require disposal

International Nuclear Information System (INIS)

Kirner, N.P.

1990-01-01

Estimating needed mixed-waste disposal capacity to 1995 and beyond is an essential element in the safe management of low-level radioactive waste disposal capacity. Information on the types and quantities of mixed waste generated is needed by industry to allow development of treatment facilities and by states and others responsible for disposal and storage of this type of low-level radioactive waste. The design of a mixed waste disposal facility hinges on a detailed assessment of the types and quantities of mixed waste that will ultimately require land disposal. Although traditional liquid scintillation counting fluids using toluene and xylene are clearly recognized as mixed waste, characterization of other types of mixed waste has, however, been difficult. Liquid scintillation counting fluids comprise most of the mixed waste generated and this type of mixed waste is generally incinerated under the supplemental fuel provisions of the Resource Conservation and Recovery Act (RCRA) Because there are no Currently operating mixed waste land disposal facilities, it is impossible to make projections of waste requiring land disposal based on a continuation of current waste disposal practices. Evidence indicates the volume of mixed waste requiring land disposal is not large, since generators are apparently storing these wastes. Surveys conducted to date confirm that relatively small volumes of commercially generated mixed waste volume have relied heavily oil generators' knowledge of their wastes. Evidence exists that many generators are confused by the differences between the Atomic Energy Act and the Resource Conservation and Recovery Act (RCRA) on the issue of when a material becomes a waste. In spite of uncertainties, estimates of waste volumes requiring disposal can be made. This paper proposes an eight-step process for such estimates

An 8-year experience with routine SL mix patch testing supplemented with Compositae mix in Denmark

DEFF Research Database (Denmark)

Paulsen, E; Andersen, Klaus Ejner; Hausen, B M

2001-01-01

Routine patch testing with sesquiterpene lactone (SL) mix, supplemented with Compositae mix (CM) and other Compositae extracts and allergens where appropriate, was evaluated over an 8-year period. 190 of 4386 patients tested (4.3%) were Compositae-sensitive, 143 females (mean age 51.5 years) and ...

Dilution refrigeration with multiple mixing chambers

International Nuclear Information System (INIS)

Coops, G.M.

1981-01-01

A dilution refrigerator is an instrument to reach temperatures in the mK region in a continuous way. The temperature range can be extended and the cooling power can be enlarged by adding an extra mixing chamber. In this way we obtain a double mixing chamber system. In this thesis the theory of the multiple mixing chamber is presented and tested on its validity by comparison with the measurements. Measurements on a dilution refrigerator with a circulation rate up to 2.5 mmol/s are also reported. (Auth.)

Studies of lipid interactions in mixed Langmuir monolayers

Energy Technology Data Exchange (ETDEWEB)

Gzyl-Malcher, Barbara [Department of Physical Chemistry and Electrochemistry, Faculty of Chemistry, Jagiellonian University, Ingardena 3, 30-060 Krakow (Poland)], E-mail: gzyl@chemia.uj.edu.pl; Paluch, Maria [Department of Physical Chemistry and Electrochemistry, Faculty of Chemistry, Jagiellonian University, Ingardena 3, 30-060 Krakow (Poland)

2008-10-31

The mixed monolayers of dipalmitoyl phosphatidylcholine (DPPC) with 3-monopalmitoyl glycerol (PG) and palmitic acid 4-methylumbelliferyl ester (4-MU) were compared. Relevant thermodynamic parameters such as excess area ({delta}A{sup E}) and excess free energy of mixing ({delta}G{sub mix}{sup E}) were derived from the surface pressure data obtained from compression measurements performed in a Langmuir trough. Generally, DPPC formed more condensed monolayers with PG and greater negative values of {delta}A{sup E} and {delta}G{sub mix}{sup E} were observed for DPPC/PG system than for DPPC/4-MU one. The positive values of the excess free entropy of mixing ({delta}S{sub mix}{sup E}) were calculated for DPPC/4-MU system at lower temperatures and for DPPC/PG system at higher temperatures.

Light emission mechanism of mixed host organic light-emitting diodes

Science.gov (United States)

Song, Wook; Lee, Jun Yeob

2015-03-01

Light emission mechanism of organic light-emitting diodes with a mixed host emitting layer was studied using an exciplex type mixed host and an exciplex free mixed host. Monitoring of the current density and luminance of the two type mixed host devices revealed that the light emission process of the exciplex type mixed host was dominated by energy transfer, while the light emission of the exciplex free mixed host was controlled by charge trapping. Mixed host composition was also critical to the light emission mechanism, and the contribution of the energy transfer process was maximized at 50:50 mixed host composition. Therefore, it was possible to manage the light emission process of the mixed host devices by managing the mixed host composition.

Mixed and Low-Level Treatment Facility Project. Appendix B, Waste stream engineering files, Part 1, Mixed waste streams

Energy Technology Data Exchange (ETDEWEB)

1992-04-01

This appendix contains the mixed and low-level waste engineering design files (EDFS) documenting each low-level and mixed waste stream investigated during preengineering studies for Mixed and Low-Level Waste Treatment Facility Project. The EDFs provide background information on mixed and low-level waste generated at the Idaho National Engineering Laboratory. They identify, characterize, and provide treatment strategies for the waste streams. Mixed waste is waste containing both radioactive and hazardous components as defined by the Atomic Energy Act and the Resource Conservation and Recovery Act, respectively. Low-level waste is waste that contains radioactivity and is not classified as high-level waste, transuranic waste, spent nuclear fuel, or 11e(2) byproduct material as defined by DOE 5820.2A. Test specimens of fissionable material irradiated for research and development only, and not for the production of power or plutonium, may be classified as low-level waste, provided the concentration of transuranic is less than 100 nCi/g. This appendix is a tool that clarifies presentation format for the EDFS. The EDFs contain waste stream characterization data and potential treatment strategies that will facilitate system tradeoff studies and conceptual design development. A total of 43 mixed waste and 55 low-level waste EDFs are provided.

Pressure supression pool thermal mixing

International Nuclear Information System (INIS)

Cook, D.H.

1984-10-01

A model is developed and verified to describe the thermal mixing that occurs in the pressure suppression pool (PSP) of a commercial BWR. The model is designed specifically for a Mark-I containment and is intended for use in severe accident sequence analyses. The model developed in this work produces space and time dependent temperature results throughout the PSP and is useful for evaluating the bulk PSP thermal mixing, the condensation effectiveness of the PSP, and the long-term containment integrity. The model is designed to accommodate single or multiple discharging T-quenchers, a PSP circumferential circulation induced by the residual heat removal system discharge, and the thermal stratification of the pool that occurs immediately after the relief valves close. The PSP thermal mixing is verified by comparing the model-predicted temperatures to experimental temperatures that were measured in an operating BWR suppression pool. The model is then used to investigate several PSP thermal mixing problems that include the time to saturate at full relief valve flow, the temperature response to a typical stuck open relief valve scenario, and the effect of operator rotation of the relief valve discharge point

Pressure suppression pool thermal mixing

International Nuclear Information System (INIS)

Cook, D.H.

1984-01-01

A model is developed and verified to describe the thermal mixing that occurs in the pressure suppression pool (PSP) of a commercial BWR. The model is designed specifically for a Mark-I containment and is intended for use in severe accident sequence analyses. The model produces space and time dependent temperature results throughout the PSP and is useful for evaluating the bulk PSP thermal mixing, the condensation effectiveness of the PSP, and the long-term containment integrity. The model is designed to accommodate single or multiple discharging T-quenchers, a PSP circumferential circulation induced by the residual heat removal system discharge, and the thermal stratification of the pool that occurs immediately after the relief valves close. The PSP thermal mixing model is verified by comparing the model predicted temperatures to experimental temperatures that were measured in an operating BWR suppression pool. The model is then used to investigate several PSP thermal mixing problems that include the time to saturate at full relief valve flow, the temperature response to a typical stuck open relief valve scenario, and the effect of operator rotation of the relief valve discharge point

The application of mixed methods designs to trauma research.

Science.gov (United States)

Creswell, John W; Zhang, Wanqing

2009-12-01

Despite the use of quantitative and qualitative data in trauma research and therapy, mixed methods studies in this field have not been analyzed to help researchers designing investigations. This discussion begins by reviewing four core characteristics of mixed methods research in the social and human sciences. Combining these characteristics, the authors focus on four select mixed methods designs that are applicable in trauma research. These designs are defined and their essential elements noted. Applying these designs to trauma research, a search was conducted to locate mixed methods trauma studies. From this search, one sample study was selected, and its characteristics of mixed methods procedures noted. Finally, drawing on other mixed methods designs available, several follow-up mixed methods studies were described for this sample study, enabling trauma researchers to view design options for applying mixed methods research in trauma investigations.

Mixed-effects and fMRI studies

DEFF Research Database (Denmark)

Friston, K.J; Stephan, K.E; Ellegaard Lund, Torben

2005-01-01

This note concerns mixed-effect (MFX) analyses in multisession functional magnetic resonance imaging (fMRI) studies. It clarifies the relationship between mixed-effect analyses and the two-stage 'summary statistics' procedure (Holmes, A.P., Friston, K.J., 1998. Generalisability, random effects...

Alabama warm mix asphalt field study : final report.

Science.gov (United States)

2010-05-01

The Alabama Department of Transportation hosted a warm mix asphalt field demonstration in August 2007. The warm mix asphalt technology demonstrated was Evotherm Dispersed Asphalt Technology. The WMA and hot mix asphalt produced for the demonstration ...

Idealized mixing impacts

International Nuclear Information System (INIS)

Peterson, R.A.

1999-01-01

The dispersion of tetraphenylborate in continuous stirred tank reactors plays a significant role in the utility achieved from the tetraphenylborate. Investigating idealized mixing of the materials can illuminate how this dispersion occurs

Chaotic Fluid Mixing in Crystalline Sphere Arrays

Science.gov (United States)

Turuban, Regis; Lester, Daniel; Meheust, Yves; Le Borgne, Tanguy

2017-11-01

We study the Lagrangian dynamics of steady 3D Stokes flow over simple cubic (SC) and body-centered cubic (BCC) lattices of close-packed spheres, and uncover the mechanisms governing chaotic mixing. Due to the cusp-shaped sphere contacts, the topology of the skin friction field is fundamentally different to that of continuous (non-granular) media (e.g. open pore networks), with significant implications for fluid mixing. Weak symmetry breaking of the flow orientation with respect to the lattice symmetries imparts a transition from regular to strong chaotic mixing in the BCC lattice, whereas the SC lattice only exhibits weak mixing. Whilst the SC and BCC lattices share the same symmetry point group, these differences are explained in terms of their space groups, and we find that a glide symmetry of the BCC lattice generates chaotic mixing. These insights are used to develop accurate predictions of the Lyapunov exponent distribution over the parameter space of mean flow orientation, and point to a general theory of mixing and dispersion based upon the inherent symmetries of arbitrary crystalline structures. The authors acknowledge the support of ERC project ReactiveFronts (648377).

Patch testing with constituents of Compositae mixes.

Science.gov (United States)

Paulsen, Evy; Andersen, Klaus E

2012-05-01

The development of mixes containing Compositae plant extracts has improved the diagnosis of Compositae contact allergy, but none of them has fulfilled the criteria for an ideal European plant mix. To evaluate which constituents of two commercial Compositae mixes were most useful as screening agents. These comprised 76 patients testing positive to Compositae mix 6% in petrolatum and 29 patients testing positive to Compositae mix 5% pet., all of whom were tested with constituents of the respective mixes. The majority of patients tested positive to parthenolide or parthenolide-containing extracts, followed by German chamomile, yarrow, and arnica. As German chamomile is a weak sensitizer, the results suggest cross-reactions or reactions to unknown allergens. No one was positive to Roman chamomile. Even though parthenolide seems to be a suitable supplement to the baseline series, the results emphasize that it is important to patch test with extracts of native or locally grown plants, not only because of the geographical variation, but also because of the potential unknown allergens contained in short ether preparations and the variability in the individual patient's exposure and cross-reaction patterns. © 2012 John Wiley & Sons A/S.

Plastometry for the Self-Compacting Concrete Mixes

Science.gov (United States)

Lapsa, V. Ā.; Krasnikovs, A.; Lusis, V.; Lukasenoks, A.

2015-11-01

Operative determination of consistence of self-compacting concrete mixes at plant or in construction conditions is an important problem in building practice. The Abram's cone, the Vebe's device, the U-box siphon, L-box or funnel tests are used in solving this problem. However, these field methods are targeted at determination of some indirect parameters of such very complicated paste-like material like concrete mix. They are not physical characteristics suitable for the rheological calculations of the coherence between the stress and strains, flow characteristics and the reaction of the concrete mix in different technological processes. A conical plastometer having higher precision and less sensitive to the inaccuracy of the tests in construction condition has been elaborated at the Concrete Mechanics Laboratory of RTU. In addition, a new method was elaborated for the calculation of plasticity limit τ0 taking into account the buoyancy force of the liquid or non-liquid concrete mix. In the present investigation rheological test of the concrete mix by use the plastometer and the method mentioned earlier was conducted for different self-compacting and not self-compacting concrete mixes.

Visualizing turbulent mixing of gases and particles

Science.gov (United States)

Ma, Kwan-Liu; Smith, Philip J.; Jain, Sandeep

1995-01-01

A physical model and interactive computer graphics techniques have been developed for the visualization of the basic physical process of stochastic dispersion and mixing from steady-state CFD calculations. The mixing of massless particles and inertial particles is visualized by transforming the vector field from a traditionally Eulerian reference frame into a Lagrangian reference frame. Groups of particles are traced through the vector field for the mean path as well as their statistical dispersion about the mean position by using added scalar information about the root mean square value of the vector field and its Lagrangian time scale. In this way, clouds of particles in a turbulent environment are traced, not just mean paths. In combustion simulations of many industrial processes, good mixing is required to achieve a sufficient degree of combustion efficiency. The ability to visualize this multiphase mixing can not only help identify poor mixing but also explain the mechanism for poor mixing. The information gained from the visualization can be used to improve the overall combustion efficiency in utility boilers or propulsion devices. We have used this technique to visualize steady-state simulations of the combustion performance in several furnace designs.

Second-Order Assortative Mixing in Social Networks

DEFF Research Database (Denmark)

Zhou, Shi; Cox, Ingemar; Hansen, Lars Kai

2017-01-01

In a social network, the number of links of a node, or node degree, is often assumed as a proxy for the node’s importance or prominence within the network. It is known that social networks exhibit the (first-order) assortative mixing, i.e. if two nodes are connected, they tend to have similar node...... degrees, suggesting that people tend to mix with those of comparable prominence. In this paper, we report the second-order assortative mixing in social networks. If two nodes are connected, we measure the degree correlation between their most prominent neighbours, rather than between the two nodes...... themselves. We observe very strong second-order assortative mixing in social networks, often significantly stronger than the first-order assortative mixing. This suggests that if two people interact in a social network, then the importance of the most prominent person each knows is very likely to be the same...

Interaction of Microphysical Aerosol Processes with Hydrodynamics Mixing

KAUST Repository

Alshaarawi, Amjad

2015-12-15

This work is concerned with the interaction between condensing aerosol dynamics and hydrodynamic mixing within ow configurations in which aerosol particles form (nucleate) from a supersaturated vapor and supersaturation is induced by the mixing of two streams (a saturated stream and a cold one). Two canonical hydrodynamic configurations are proposed for the investigation. The First is the steady one-dimensional opposed-ow configuration. The setup consists of the two (saturated and cold) streams owing from opposite nozzles. A mixing layer is established across a stagnation plane in the center where nucleation and other aerosol dynamics are triggered. The second is homogeneous isotropic turbulence in a three-dimensional periodic domain. Patches of a hot saturated gas mix with patches of a cold one. A mixing layer forms across the growing interface where the aerosol dynamics of interest occur. In both configurations, a unique analogy is observed. The results reveal a complex response to variations in the mixing rates. Depending on the mixing rate, the response of the number density falls into one of two regimes. For fast mixing rates, the maximum reached number density of the condensing droplets increases with the hydrodynamic time. We refer to this as the nucleation regime. On the contrary, for low mixing rates, the maximum reached number density decreases with the hydrodynamic time. We refer to this as the consumption regime. It is shown that vapor scavenging by the aerosol phase is key to explaining the transition between these two regimes.

Cup-mixing type cup vending machines; Cup mixing shiki cup jido hanbaiki

Energy Technology Data Exchange (ETDEWEB)

Nishiwaki, S.; Nagasaki, T.; Hori, S. [Fuji Electric Co. Ltd., Tokyo (Japan)

1996-07-10

This paper introduces the newly developed cup-mixing type cup vending machines. In the vending machines, the powder material for each beverage is stored, and the powder material delivered to a cup is carried to the cooking block by the carrier mechanism and cooked and mixed using a propeller mixer after hot and cold water are put. These vending machines meet the needs to the diversified and quality taste. The ejection port of products was also improved, and the door was designed to be higher in grade. The main block of structure is described next. The cup carrier mechanism consists of X, Y, and Z axes, and a hand. The cup is positioned by the control of a stepping motor. The number of propeller rotations in the propeller mechanism can be set to nine levels. The mixing position can also be set freely. In the temporary material reservation mechanism, the stored material is temporarily reserved until a cup is carried. The ejection port door of a cup is opened or closed automatically. The control block that drives the cup carrier mechanism is connected with the host unit by serial communication. 9 figs., 1 tab.

Realism and Pragmatism in a mixed methods study.

Science.gov (United States)

Allmark, Peter; Machaczek, Katarzyna

2018-06-01

A discussion of how adopting a Realist rather than Pragmatist methodology affects the conduct of mixed methods research. Mixed methods approaches are now extensively employed in nursing and other healthcare research. At the same time, realist methodology is increasingly used as philosophical underpinning of research in these areas. However, the standard philosophical underpinning of mixed methods research is Pragmatism, which is generally considered incompatible or at least at odds with Realism. This paper argues that Realism can be used as the basis of mixed methods research and that doing so carries advantages over using Pragmatism. A mixed method study into patient handover reports is used to illustrate how Realism affected its design and how it would have differed had a Pragmatist approach been taken. Discussion Paper. Philosophers Index; Google Scholar. Those undertaking mixed methods research should consider the use of Realist methodology with the addition of some insights from Pragmatism to do with the start and end points of enquiry. Realism is a plausible alternative methodology for those undertaking mixed methods studies. © 2018 John Wiley & Sons Ltd.

Addressing Research Design Problem in Mixed Methods Research

Science.gov (United States)

Alavi, Hamed; Hąbek, Patrycja

2016-03-01

Alongside other disciplines in social sciences, management researchers use mixed methods research more and more in conduct of their scientific investigations. Mixed methods approach can also be used in the field of production engineering. In comparison with traditional quantitative and qualitative research methods, reasons behind increasing popularity of mixed research method in management science can be traced in different factors. First of all, any particular discipline in management can be theoretically related to it. Second is that concurrent approach of mixed research method to inductive and deductive research logic provides researchers with opportunity to generate theory and test hypothesis in one study simultaneously. In addition, it provides a better justification for chosen method of investigation and higher validity for obtained answers to research questions. Despite increasing popularity of mixed research methods among management scholars, there is still need for a comprehensive approach to research design typology and process in mixed research method from the perspective of management science. The authors in this paper try to explain fundamental principles of mixed research method, its typology and different steps in its design process.

Laboratory evaluation of warm mix asphalt.

Science.gov (United States)

2011-09-14

"Hot Mix Asphalt (HMA) has been traditionally produced at a discharge temperature of between : 280F (138C) and 320 F (160C), resulting in high energy (fuel) costs and generation of greenhouse : gases. The goal for Warm Mix Asphalt (WMA) is to...

Owner perceived differences between mixed-breed and purebred dogs.

Science.gov (United States)

Turcsán, Borbála; Miklósi, Ádám; Kubinyi, Enikő

2017-01-01

Studies about the behaviours of mixed-breed dogs are rare, although mixed-breeds represent the majority of the world's dog population. We have conducted two surveys to investigate the behavioural, demographic, and dog keeping differences between purebred and mixed-breed companion dogs. Questionnaire data were collected on a large sample of dogs living in Germany (N = 7,700 purebred dogs representing more than 200 breeds, and N = 7,691 mixed-breeds). We found that according to their owners, mixed-breeds were (1) less calm, (2) less sociable toward other dogs, and (3) showed more problematic behaviour than purebreds (p dog keeping factors differed between purebred and mixed-breed dogs, and two factors showed considerable (> 10%) differences: neutering was more frequent among mixed-breeds, and they were acquired at older ages than purebreds (p dog keeping factors, we found that mixed-breeds were (1) more trainable than purebreds, (2) less calm, and (3) showed more problematic behaviour than purebreds (p dogs, mixed-breeds represent a special group with characteristic behavioural traits.

Effect of prolonged mixing time on concrete properties

International Nuclear Information System (INIS)

Mohd Noorul Ikhsan Mohamed; Sidek, H.A.A.; Wahab, Z.A.

2009-01-01

The correlation between workability, compressive strength and mixing time of fresh concrete has been studied. The concrete samples used in the study are normal concrete of grade 30. The mix design of the concrete samples was estimated using software called Calcrete. Three concrete cubes of 150 mm size were cast immediately after mixing. The same grade of concrete was prepared with the mixing time of 30 minutes to 5 hours. All of the concrete samples were cured for 28 days under room temperature before they were compressed using a compression machine. Result shows that the compressive strength of concrete decreases when mixing time is increased. (author)

Axial vector mass spectrum and mixing angles

International Nuclear Information System (INIS)

Caffarelli, R.V.; Kang, K.

1976-01-01

Spectral sum rules of the axial-vector current and axial-vector current-pseudoscalar field are used to study the axial-vector mass spectrum and mixing angles, as well as the decay constants and mixing angles of the pseudoscalar mesons. In general, the result is quite persuasive for the existence of the Jsup(PC) = 1 ++ multiplet in which one has a canonical D-E mixing. (Auth.)

Linear mixed models for longitudinal data

CERN Document Server

Molenberghs, Geert

2000-01-01

This paperback edition is a reprint of the 2000 edition. This book provides a comprehensive treatment of linear mixed models for continuous longitudinal data. Next to model formulation, this edition puts major emphasis on exploratory data analysis for all aspects of the model, such as the marginal model, subject-specific profiles, and residual covariance structure. Further, model diagnostics and missing data receive extensive treatment. Sensitivity analysis for incomplete data is given a prominent place. Several variations to the conventional linear mixed model are discussed (a heterogeity model, conditional linear mixed models). This book will be of interest to applied statisticians and biomedical researchers in industry, public health organizations, contract research organizations, and academia. The book is explanatory rather than mathematically rigorous. Most analyses were done with the MIXED procedure of the SAS software package, and many of its features are clearly elucidated. However, some other commerc...

Development of a Self-Rated Mixed Methods Skills Assessment: The NIH Mixed Methods Research Training Program for the Health Sciences

Science.gov (United States)

Guetterman, Timothy C.; Creswell, John W.; Wittink, Marsha; Barg, Fran K.; Castro, Felipe G.; Dahlberg, Britt; Watkins, Daphne C.; Deutsch, Charles; Gallo, Joseph J.

2017-01-01

Introduction Demand for training in mixed methods is high, with little research on faculty development or assessment in mixed methods. We describe the development of a Self-Rated Mixed Methods Skills Assessment and provide validity evidence. The instrument taps six research domains: “Research question,” “Design/approach,” “Sampling,” “Data collection,” “Analysis,” and “Dissemination.” Respondents are asked to rate their ability to define or explain concepts of mixed methods under each domain, their ability to apply the concepts to problems, and the extent to which they need to improve. Methods We administered the questionnaire to 145 faculty and students using an internet survey. We analyzed descriptive statistics and performance characteristics of the questionnaire using Cronbach’s alpha to assess reliability and an ANOVA that compared a mixed methods experience index with assessment scores to assess criterion-relatedness. Results Internal consistency reliability was high for the total set of items (.95) and adequate (>=.71) for all but one subscale. Consistent with establishing criterion validity, respondents who had more professional experiences with mixed methods (e.g., published a mixed methods paper) rated themselves as more skilled, which was statistically significant across the research domains. Discussion This Self-Rated Mixed Methods Assessment instrument may be a useful tool to assess skills in mixed methods for training programs. It can be applied widely at the graduate and faculty level. For the learner, assessment may lead to enhanced motivation to learn and training focused on self-identified needs. For faculty, the assessment may improve curriculum and course content planning. PMID:28562495

Carcinoma ex mixed tumor arising in the parotid gland

International Nuclear Information System (INIS)

Choi, Y. S.; Hwang, E. H.; Lee, S. R.

2000-01-01

Carcinoma ex mixed tumor is a mixed tumor in which a second neoplasm develops from the epithelial component that fulfills the criteria for malignancy. This tumor occurs frequently in the parotid glands. Individuals in whom carcinoma ex mixed tumor have a past history of benign mixed tumor. These lesions contain both a benign mixed tumor as well as a malignant neoplasm. We report a case of carcinoma ex mixed tumor which occurred in the parotid gland. A 67-year-old woman presented with movable right mass. She complained pain and facial paralysis. The clinical presentation, several diagnostic images, and histopathologic findings are presented.

Mixed problem with nonlocal boundary conditions for a third-order partial differential equation of mixed type

OpenAIRE

Denche, M.; Marhoune, A. L.

2001-01-01

We study a mixed problem with integral boundary conditions for a third-order partial differential equation of mixed type. We prove the existence and uniqueness of the solution. The proof is based on two-sided a priori estimates and on the density of the range of the operator generated by the considered problem.

Critical Appraisal of Mixed Methods Studies

Science.gov (United States)

Heyvaert, Mieke; Hannes, Karin; Maes, Bea; Onghena, Patrick

2013-01-01

In several subdomains of the social, behavioral, health, and human sciences, research questions are increasingly answered through mixed methods studies, combining qualitative and quantitative evidence and research elements. Accordingly, the importance of including those primary mixed methods research articles in systematic reviews grows. It is…

Multipartite entangled states in particle mixing

International Nuclear Information System (INIS)

Blasone, M.; Dell'Anno, F.; De Siena, S.; Di Mauro, M.; Illuminati, F.

2008-01-01

In the physics of flavor mixing, the flavor states are given by superpositions of mass eigenstates. By using the occupation number to define a multiqubit space, the flavor states can be interpreted as multipartite mode-entangled states. By exploiting a suitable global measure of entanglement, based on the entropies related to all possible bipartitions of the system, we analyze the correlation properties of such states in the instances of three- and four-flavor mixing. Depending on the mixing parameters, and, in particular, on the values taken by the free phases, responsible for the CP-violation, entanglement concentrates in certain bipartitions. We quantify in detail the amount and the distribution of entanglement in the physically relevant cases of flavor mixing in quark and neutrino systems. By using the wave packet description for localized particles, we use the global measure of entanglement, suitably adapted for the instance of multipartite mixed states, to analyze the decoherence, induced by the free evolution dynamics, on the quantum correlations of stationary neutrino beams. We define a decoherence length as the distance associated with the vanishing of the coherent interference effects among massive neutrino states. We investigate the role of the CP-violating phase in the decoherence process.

Chaotic mixing by microswimmers moving on quasiperiodic orbits

Science.gov (United States)

Jalali, Mir Abbas; Khoshnood, Atefeh; Alam, Mohammad-Reza

2015-11-01

Life on the Earth is strongly dependent upon mixing across a vast range of scales. For example, mixing distributes nutrients for microorganisms in aquatic environments, and balances the spatial energy distribution in the oceans and the atmosphere. From industrial point of view, mixing is essential in many microfluidic processes and lab-on-a-chip operations, polymer engineering, pharmaceutics, food engineering, petroleum engineering, and biotechnology. Efficient mixing, typically characterized by chaotic advection, is hard to achieve in low Reynolds number conditions because of the linear nature of the Stokes equation that governs the motion. We report the first demonstration of chaotic mixing induced by a microswimmer that strokes on quasiperiodic orbits with multi-loop turning paths. Our findings can be utilized to understand the interactions of microorganisms with their environments, and to design autonomous robotic mixers that can sweep and mix an entire volume of complex-geometry containers.

Optimal Control of Evolution Mixed Variational Inclusions

Energy Technology Data Exchange (ETDEWEB)

Alduncin, Gonzalo, E-mail: alduncin@geofisica.unam.mx [Universidad Nacional Autónoma de México, Departamento de Recursos Naturales, Instituto de Geofísica (Mexico)

2013-12-15

Optimal control problems of primal and dual evolution mixed variational inclusions, in reflexive Banach spaces, are studied. The solvability analysis of the mixed state systems is established via duality principles. The optimality analysis is performed in terms of perturbation conjugate duality methods, and proximation penalty-duality algorithms to mixed optimality conditions are further presented. Applications to nonlinear diffusion constrained problems as well as quasistatic elastoviscoplastic bilateral contact problems exemplify the theory.

Recoil mixing in high-fluence ion implantation

International Nuclear Information System (INIS)

Littmark, U.; Hofer, W.O.

1979-01-01

The effect of recoil mixing on the collection and depth distribution of implanted projectiles during high-fluence irradiation of a random solid is investigated by model calculations based on a previously published transport theoretical approach to the general problem of recoil mixing. The most pronounced effects are observed in the maximum implantable amount of projectiles and in the critical fluence for saturation. Both values are significantly increased by recoil mixing. (Auth.)

Optimal Control of Evolution Mixed Variational Inclusions

International Nuclear Information System (INIS)

Alduncin, Gonzalo

2013-01-01

Optimal control problems of primal and dual evolution mixed variational inclusions, in reflexive Banach spaces, are studied. The solvability analysis of the mixed state systems is established via duality principles. The optimality analysis is performed in terms of perturbation conjugate duality methods, and proximation penalty-duality algorithms to mixed optimality conditions are further presented. Applications to nonlinear diffusion constrained problems as well as quasistatic elastoviscoplastic bilateral contact problems exemplify the theory

Turbulence and Interfacial Mixing

Energy Technology Data Exchange (ETDEWEB)

Glimm, James; Li, Xiaolin

2005-03-15

The authors study mix from analytical and numerical points of view. These investigations are linked. The analytical studies (in addition to laboratory experiments) provide bench marks for the direct simulation of mix. However, direct simulation is too detailed to be useful and to expensive to be practical. They also consider averaged equations. Here the major issue is the validation of the closure assumptions. They appeal to the direct simulation methods for this step. They have collaborated with several NNSA teams; moreover, Stony Brook alumni (former students, faculty and research collaborators) presently hold staff positions in NNSA laboratories.

Mixed Methods, Triangulation, and Causal Explanation

Science.gov (United States)

Howe, Kenneth R.

2012-01-01

This article distinguishes a disjunctive conception of mixed methods/triangulation, which brings different methods to bear on different questions, from a conjunctive conception, which brings different methods to bear on the same question. It then examines a more inclusive, holistic conception of mixed methods/triangulation that accommodates…

7 CFR 29.3532 - Mixed (M).

Science.gov (United States)

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Mixed (M). 29.3532 Section 29.3532 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Type 95) § 29.3532 Mixed (M). Variegated or distinctly different colors of the type mingled together...

Radiotracer aided optimization of batch mixing of solids

International Nuclear Information System (INIS)

Kolar, Z.I.; Bergh, W.J.B. van den; Scarlett, B.

1989-01-01

A method for the determination of mixing times has been developed and tested in a model Nauta mixer filled with sand. 128 I-labelled sand particles were used as radiotracer and the progress of mixing was monitored with two radiation detectors located externally. The variance of the radiation intensity decreases with time until a constant value is reached indicating an equilibrium mixture of tracer and sand. The time necessary to achieve this condition (mixing time) appears to be dependent on the rotational speed of the hopper as well as the screw of the mixer. Optimal mixing performance (shortest mixing time) corresponds to the maximal rotational speeds of both rotating parts of the mixer. (author)

Rutting based evaluation of asphalt mixes

International Nuclear Information System (INIS)

Khan, K.M.

2012-01-01

Pavement rutting is one of the most common and destructive pavement distresses being observed in flexible pavements, which is primarily due to a-x-le loads that exceed legal limit and high ambient temperatures, and also poor mix design is one of the cause of rutting. The drastic increase in traffic volume during last few decades has resulted in premature pavement fillers of almost the whole road structure in Pakistan. In this scenario it is the time to investigate this problem and propose appropriate solution. Physical properties of aggregates and bitumen were evaluated in the laboratory. Mechanical Properties of three mixes. i.e., Marshall, Super pave and Stone Mastic Asphalt (SMA) were evaluated by performing creep test. indirect tensile test and dynamic modulus in order to compare the performance of mixes under prevailing load and environmental conditions of Pakistan. The study revealed that Super pave mixes performed better than Marshall and SMA. (author)

Rational choice, neuroeconomy and mixed emotions

Science.gov (United States)

Livet, Pierre

2010-01-01

Experimental psychology has shown differences between predictions of theory of decision and human choices. Emotions like regret can partly explain these differences. Neuroimagery used in combination with behavioural economics (neuroeconomics) has been used in order to try to disentangle the different emotional and rational factors (regret, rejoicing, reward, costs, uncertainty, trade-off between positive and negative aspects of different options). Emotions then appear as much more complex and mixed affective states than usually assumed. Not only might we feel a positive affect in punishing unfair partners, but mixed emotions can, for example, combine transmutation of previous anxiety into relief and elation by comparison with another less exciting option (elating relief). At the level of complexity of these mixed emotions—which we formally represent by comparisons between ‘unexpected utilities’ and expected ones—the main biases that Kahnemann and Tversky have shown can be explained. In spite of the complexity of these mixed emotions, some of these hypotheses might be partially tested by brain imagery. PMID:20026464

Rational choice, neuroeconomy and mixed emotions.

Science.gov (United States)

Livet, Pierre

2010-01-27

Experimental psychology has shown differences between predictions of theory of decision and human choices. Emotions like regret can partly explain these differences. Neuroimagery used in combination with behavioural economics (neuroeconomics) has been used in order to try to disentangle the different emotional and rational factors (regret, rejoicing, reward, costs, uncertainty, trade-off between positive and negative aspects of different options). Emotions then appear as much more complex and mixed affective states than usually assumed. Not only might we feel a positive affect in punishing unfair partners, but mixed emotions can, for example, combine transmutation of previous anxiety into relief and elation by comparison with another less exciting option (elating relief). At the level of complexity of these mixed emotions--which we formally represent by comparisons between 'unexpected utilities' and expected ones--the main biases that Kahnemann and Tversky have shown can be explained. In spite of the complexity of these mixed emotions, some of these hypotheses might be partially tested by brain imagery.

Charged lepton mixing - an experimental overview

Science.gov (United States)

Rusu, Vadim

2015-04-01

Exploring the flavor sector of the Standard Model has always been a powerful probe in particle physics. Searches for charged leptons mixing, in particular muon decays, effectively pioneered this program almost 100 years ago. Still, even what one might consider, naively, simple questions, like why three lepton generations, are left unanswered. We do know now that neutral leptons (neutrinos) mix. We also know that, in all likelihood, the physics behind charged lepton mixing is also somehow responsible for generating neutrino masses. Not surprisingly, a revived interest in this field is currently under way, with experiments either ongoing or at planning stage throughout the world. The advent of powerful high intensity beams opens up new venues for exploration. Coupled with clever experimental ideas, sensitivities that were previously impossible to attain, are now within reach. I will review here the current status of charged lepton mixing experiments, what should we expect from the next generation projects and my view on how the field will progress in the future.

Is the tri-bimaximal mixing accidental?

CERN Document Server

Abbas, Mohammed

2010-01-01

The Tri-bimaximal (TBM) mixing is not accidental if structures of the corresponding leptonic mass matrices follow immediately from certain (residual or broken) flavor symmetry. We develop a simple formalism which allows one to analyze effects of deviations of the lepton mixing from TBM on structure of the neutrino mass matrix and on underlying flavor symmetry. We show that possible deviations from the TBM mixing can lead to strong modifications of the mass matrix and strong violation of the TBM mass relations. As a result, the mass matrix may have an "anarchical" structure with random values of elements or it may have some symmetry which differs from the TBM symmetry. Interesting examples include matrices with texture zeros, matrices with certain "flavor alignment" as well as hierarchical matrices with a two-component structure, where the dominant and sub-dominant contributions have different symmetries. This opens up new approaches to understand the lepton mixing.

Magnetic particle mixing with magnetic micro-convection for microfluidics

International Nuclear Information System (INIS)

Kitenbergs, Guntars; Erglis, Kaspars; Perzynski, Régine; Cēbers, Andrejs

2015-01-01

In this paper we discuss the magnetic micro-convection phenomenon as a tool for mixing enhancement in microfluidics systems in cases when one of the miscible fluids is a magnetic particle colloid. A system of a water-based magnetic fluid and water is investigated experimentally under homogeneous magnetic field in a Hele–Shaw cell. Subsequent image analysis both qualitatively and quantitatively reveals the high enhancement of mixing efficiency provided by this method. The mixing efficiency dependence on the magnetic field and the physical limits is discussed. A suitable model for a continuous-flow microfluidics setup for mixing with magnetic micro-convection is also proposed and justified with an experiment. In addition, possible applications in improving the speed of ferrohydrodynamic sorting and magnetic label or selected tracer mixing in lab on a chip systems are noted. - Highlights: • We study the magnetic micro-convection as a mixing method in microfluidics. • We show that the method enhances mixing with magnetic field squared dependency. • We propose a flow cell setup for mixing and justify it with a sample experiment. • The mixing method can be easily implemented in an existing microfluidics setup

Mixed and Low-Level Treatment Facility Project

Energy Technology Data Exchange (ETDEWEB)

1992-04-01

This appendix contains the mixed and low-level waste engineering design files (EDFS) documenting each low-level and mixed waste stream investigated during preengineering studies for Mixed and Low-Level Waste Treatment Facility Project. The EDFs provide background information on mixed and low-level waste generated at the Idaho National Engineering Laboratory. They identify, characterize, and provide treatment strategies for the waste streams. Mixed waste is waste containing both radioactive and hazardous components as defined by the Atomic Energy Act and the Resource Conservation and Recovery Act, respectively. Low-level waste is waste that contains radioactivity and is not classified as high-level waste, transuranic waste, spent nuclear fuel, or 11e(2) byproduct material as defined by DOE 5820.2A. Test specimens of fissionable material irradiated for research and development only, and not for the production of power or plutonium, may be classified as low-level waste, provided the concentration of transuranic is less than 100 nCi/g. This appendix is a tool that clarifies presentation format for the EDFS. The EDFs contain waste stream characterization data and potential treatment strategies that will facilitate system tradeoff studies and conceptual design development. A total of 43 mixed waste and 55 low-level waste EDFs are provided.

Mixed and Low-Level Treatment Facility Project

International Nuclear Information System (INIS)

1992-04-01

This appendix contains the mixed and low-level waste engineering design files (EDFS) documenting each low-level and mixed waste stream investigated during preengineering studies for Mixed and Low-Level Waste Treatment Facility Project. The EDFs provide background information on mixed and low-level waste generated at the Idaho National Engineering Laboratory. They identify, characterize, and provide treatment strategies for the waste streams. Mixed waste is waste containing both radioactive and hazardous components as defined by the Atomic Energy Act and the Resource Conservation and Recovery Act, respectively. Low-level waste is waste that contains radioactivity and is not classified as high-level waste, transuranic waste, spent nuclear fuel, or 11e(2) byproduct material as defined by DOE 5820.2A. Test specimens of fissionable material irradiated for research and development only, and not for the production of power or plutonium, may be classified as low-level waste, provided the concentration of transuranic is less than 100 nCi/g. This appendix is a tool that clarifies presentation format for the EDFS. The EDFs contain waste stream characterization data and potential treatment strategies that will facilitate system tradeoff studies and conceptual design development. A total of 43 mixed waste and 55 low-level waste EDFs are provided

Energy mix and employment effects

International Nuclear Information System (INIS)

Wodopia, F.J.

2005-01-01

''Energy Mix and Employment Effects'' is a subject not to be reduced to the so-called ''job argument''. It also involves the question whether it will be possible to achieve consensus again about the composition of a balanced sustainable energy mix. This term must not be interpreted in a static sense; after all, the framework conditions of energy policy are changing. However, this must not render energy policy unsteady. This requirement should be imposed on economic policy in general, i.e. political interventions, it they are really unavoidable, must be predictable on a long term. This contribution also examines the meaning of the term ''energy mix.'' Aspects of the debate about the climate, especially potential factors influencing the climate, are discussed against the backdrop of scientific validity. Other key points covered are the description and analysis of the energy policy framework. One major aspect under study are all kinds of ''subsidies'' of energy resources and the consequences to the whole economy arising from these financial support mechanisms. The findings are projected onto the employment effects. Finally, the question is raised how to design an energy mix sustainable for the future, and how to achieve it politically and in society. (orig.)

Microfluidic mixing in a Y-junction open channel

Directory of Open Access Journals (Sweden)

Jue Nee Tan

2012-09-01

Full Text Available In the laminar regimes typical of microfluidic systems’, mixing is governed by molecular diffusion; however this process is slow in nature. Consequently, passive or active methods are usually sought for effective mixing. In this work, open fluidic channels will be investigated; these channels are bounded on all but one face by an air/fluid interface. Firstly, it will be shown that flow in open channels can merge at a Y-junction in a stable manner; hence two fluids can be brought into contact with each other. Secondly, the mixing of these two fluids will be studied. At high flow rates (>300 μl/min mixing occurs at the junction without need for additional intervention, this mixing is far swifter than can be expected from molecular diffusion. At lower flow rates, intervention is required. A major motivation for open fluidic channels is the ability to interact with the surrounding air environment; this feature is used to effect the desired mixing. It is shown that by blowing an air jet across the junction, shear stresses at the air/fluid interface causes a flow profile within the fluid inductive to rapid mixing of the fluids.

Higgs mixing in the NMSSM and light higgsinos

International Nuclear Information System (INIS)

Jeong, Kwang Sik; Shoji, Yutaro; Yamaguchi, Masahiro

2014-12-01

We explore the effects of Higgs mixing in the general next-to-minimal supersymmetric Standard Model (NMSSM). Extended to include a gauge singlet, the Higgs sector can naturally explain the observed Higgs boson mass in TeV scale supersymmetry without invoking large stop mixing. This is particularly the case when the singlet scalar is light so that singlet-doublet mixing increases the mass of the SM-like Higgs boson. In such a case the Higgs mixing has interesting implications following from the fact that the higgsino mass parameter and the singlet coupling to Higgs bilinear crucially depend on the Higgs boson masses and mixing angles. For the mixing compatible with the current LHC data on the Higgs signal rates, the higgsinos are required to be relatively light, around or below a few hundred GeV, as long as the heavy doublet Higgs boson has a mass smaller than about 250√(tanβ) GeV and the singlet-like Higgs boson is consistent with the LEP constraint. In addition, the Higgs coupling to photons can receive a sizable contribution of either sign from the charged-higgsino loops combined with singlet-doublet mixing.

Variation in ultrafiltered and LMW organic matter fluorescence properties under simulated estuarine mixing transects: 1. Mixing alone

Science.gov (United States)

Boyd, Thomas J.; Barham, Bethany P.; Hall, Gregory J.; Osburn, Christopher L.

2010-09-01

Ultrafiltered and low molecular weight dissolved organic matter (UDOM and LMW-DOM, respectively) fluorescence was studied under simulated estuarine mixing using samples collected from Delaware, Chesapeake, and San Francisco Bays (USA) transects. UDOM was concentrated by tangential flow ultrafiltration (TFF) from the marine (>33 PSU), mid-estuarine (˜16 PSU), and freshwater (ocean members. LMW fluorescence components fit a decreasing linear mixing model from mid salinities to the ocean end-member, but were more highly fluorescent than mixing alone would predict in lower salinities (shifts were also seen in UDOM peak emission wavelengths with blue-shifting toward the ocean end-member. Humic-type components in UDOM generally showed lower fluorescent intensities at low salinities, higher at mid-salinities, and lower again toward the ocean end-member. T (believed to be proteinaceous) and N (labile organic matter) peaks behaved similarly to each other, but not to B peak fluorescence, which showed virtually no variation in permeate or UDOM mixes with salinity. PCA and PARAFAC models showed similar results suggesting trends could be modeled for DOM end- and mid-member sources. Changes in fluorescence properties due to estuarine mixing may be important when using CDOM as a proxy for DOM cycling in coastal systems.

Regulatory aspects of mixed waste

International Nuclear Information System (INIS)

Boyle, R.R.; Orlando, D.A.

1990-01-01

Mixed waste is waste that satisfies the definition of low-level radioactive waste in the Low-Level Radioactive Waste Policy Amendments Act of 1985 (LLRWPAA) and contains hazardous waste that is either: (1) listed as a hazardous waste in 40 CFR 261, Subpart D; or (2) causes the waste to exhibit any of the characteristics identified in 40 CFR 261, Subpart C. Low-level radioactive waste is defined in the LLRWPAA as radioactive material that is not high level waste, spent nuclear fuel, or byproduct material, as defined in Section 11e(2) of the Atomic Energy Act of 1954, and is classified as low-level waste by the U.S. Nuclear Regulatory Commission (NRC). This paper discusses dual regulatory (NRC and Environmental Protection Agency) responsibility, overview of joint NRC/EPA guidance, workshops, national mixed waste survey, and principal mixed waste uncertainties

Criticality in the configuration-mixed interacting boson model: (1) U(5)-Q(χ)Q(χ) mixing

International Nuclear Information System (INIS)

Hellemans, V.; Van Isacker, P.; De Baerdemacker, S.; Heyde, K.

2007-01-01

The case of U(5)-Q(χ)Q(χ) mixing in the configuration-mixed interacting boson model is studied in its mean-field approximation. Phase diagrams with analytical and numerical solutions are constructed and discussed. Indications for first-order and second-order shape phase transitions can be obtained from binding energies and from critical exponents, respectively

Marketingový mix fitness centra AQUAPALACE PRAHA

OpenAIRE

Kochová, Barbora

2012-01-01

Bachelor thesis "Marketing mix of fitness centre Aquapalace Prague" is focused on analysis of existing marketing mix and based on these analysis suggests its adjustments. The theoretical part defines ground marketing and marketing mix terms and especially their application to sports environment. The metodology section details the methods of research and analysis. The main part of the bachelor thesis consists of processed results of marketing research and SWOT analysis and finally recommendati...

Marketingový mix HC Enegie Karlovy Vary

OpenAIRE

Štrobl, Adam

2016-01-01

Title: Marketing mix of HC Energie Karlovy Vary Objectives: This thesis is based on a questionnaire responses obtained from HC Energie Karlovy Vary fans. Its objective is focused on evaluation of their opinions on the marketing mix, their subsequent interpretation, and finally even development of recommendations for improvement based on previous analysis. Methods: Two methods are used to analyse the marketing mix. The first method is qualitative participant observation. The second method is a...

Challenges in Using Mix Methods in Evaluation

OpenAIRE

Stefan COJOCARU

2010-01-01

This article explores the debates between quantitative and qualitative methods in the evaluation process, analyzes the challenges about methodological mix in terms of credibility and validity of data and tools, and the evaluation findings. Beyond the epistemological contradictions, it seems that, in terms of usefulness, the mixing of methods is a practical solution, along with hybrids theories, able to provide information to improve the sufficiency of the program. Mixing methods is also a wa...

Mixed Media Richness and Computer-Mediated Communications

OpenAIRE

Atkins, Anthony B.

2006-01-01

Mixed richness communications occur when a participant in a conversation receives a different media or combination of media than they transmit. Mixed richness communications occur in the workplace when technical, physiological or practical limitations prevent the use of the same media on both ends of a conversation. Prior research in CMC has focused on same-richness communications, and the design guidelines that are available for same-richness communications may not be applicable to mixed-r...

Neutrino mixing in a grand unified theory

International Nuclear Information System (INIS)

Milton, K.; Tanaka, K.

1980-01-01

Neutrino mixing in a grand unified theory in which the neutrino mass matrix is determined by the Gell-Mann-Ramond-Slansky mechanism was investigated. With an arbitrary real right-handed Majorana mass matrix which incorporates three neutrino mass scales, the effects of the up-quark mass matrix are found to be dominant and as a result no significant mixing of ν/sub e/ occurs, while ν/sub μ/ - ν/sub γ/ mixing can be substantial

Ar ion beam mixing at gold-silicon interfaces

International Nuclear Information System (INIS)

Li Yupu; Chen Jian; Liu Jiarui; Zhang Qichu

1987-01-01

Ar-ion beam mixing at Au-Si interface is investigated systematically as a function of the energy of Ar-ion beam (100-300 keV), dose (5 x 10 15 - 8 x 10 16 /cm 2 ), dose rate (1.6 - 16 μA/cm 2 ) and substrate temperature (77 - 573 K). Very good ion beam mixing is obtained when the Ar-ion range distribution R p ± ΔR p fits the gold film thickness, where R p is the projected range and ΔR p is the standard deviation. At LN 2 temperature, the mixing amount is proportional to the square root of the dose but independent of the dose rate and the mixing process can be explained by the random walking model for the cascade process. At room temperature the dose rate effect is observed because of the beam current induced temperature effect. The temperature effect of the mixing amount, the uniformity, the thickness of mixing layers and the phase structure are observed

Phenomenology of maximal and near-maximal lepton mixing

International Nuclear Information System (INIS)

Gonzalez-Garcia, M. C.; Pena-Garay, Carlos; Nir, Yosef; Smirnov, Alexei Yu.

2001-01-01

The possible existence of maximal or near-maximal lepton mixing constitutes an intriguing challenge for fundamental theories of flavor. We study the phenomenological consequences of maximal and near-maximal mixing of the electron neutrino with other (x=tau and/or muon) neutrinos. We describe the deviations from maximal mixing in terms of a parameter ε(equivalent to)1-2sin 2 θ ex and quantify the present experimental status for |ε| e mixing comes from solar neutrino experiments. We find that the global analysis of solar neutrino data allows maximal mixing with confidence level better than 99% for 10 -8 eV 2 ∼ 2 ∼ -7 eV 2 . In the mass ranges Δm 2 ∼>1.5x10 -5 eV 2 and 4x10 -10 eV 2 ∼ 2 ∼ -7 eV 2 the full interval |ε| e mixing in atmospheric neutrinos, supernova neutrinos, and neutrinoless double beta decay

Do Mixed-Flora Preoperative Urine Cultures Matter?

Science.gov (United States)

Polin, Michael R; Kawasaki, Amie; Amundsen, Cindy L; Weidner, Alison C; Siddiqui, Nazema Y

2017-06-01

To determine whether mixed-flora preoperative urine cultures, as compared with no-growth preoperative urine cultures, are associated with a higher prevalence of postoperative urinary tract infections (UTIs). This was a retrospective cohort study. Women who underwent urogynecologic surgery were included if their preoperative clean-catch urine culture result was mixed flora or no growth. Women were excluded if they received postoperative antibiotics for reasons other than treatment of a UTI. Women were divided into two cohorts based on preoperative urine culture results-mixed flora or no growth; the prevalence of postoperative UTI was compared between cohorts. Baseline characteristics were compared using χ 2 or Student t tests. A logistic regression analysis then was performed. We included 282 women who were predominantly postmenopausal, white, and overweight. There were many concomitant procedures; 46% underwent a midurethral sling procedure and 68% underwent pelvic organ prolapse surgery. Preoperative urine cultures resulted as mixed flora in 192 (68%) and no growth in 90 (32%) patients. Overall, 14% were treated for a UTI postoperatively. There was no difference in the proportion of patients treated for a postoperative UTI between the two cohorts (25 mixed flora vs 13 no growth, P = 0.77). These results remained when controlling for potentially confounding variables in a logistic regression model (adjusted odds ratio 0.92, 95% confidence interval 0.43-1.96). In women with mixed-flora compared with no-growth preoperative urine cultures, there were no differences in the prevalence of postoperative UTI. The clinical practice of interpreting mixed-flora cultures as negative is appropriate.

Can small zooplankton mix lakes?

OpenAIRE

Simoncelli, S.; Thackeray, S.J.; Wain, D.J.

2017-01-01

The idea that living organisms may contribute to turbulence and mixing in lakes and oceans (biomixing) dates to the 1960s, but has attracted increasing attention in recent years. Recent modeling and experimental studies suggest that marine organisms can enhance turbulence as much as winds and tides in oceans, with an impact on mixing. However, other studies show opposite and contradictory results, precluding definitive conclusions regarding the potential importance of biomixing. For lakes, on...

Investigating goal conflict as a source of mixed emotions.

Science.gov (United States)

Berrios, Raul; Totterdell, Peter; Kellett, Stephen

2015-01-01

This research investigated whether (1) the experience of mixed emotions is a consequence of activating conflicting goals and (2) mixed emotions are distinct from emotional conflict. A preliminary experiment (Study 1, N = 35) showed that an elicited goal conflict predicted more mixed emotions than a condition where the same goals were not in conflict. The second experiment was based on naturally occurring goal activation (Study 2, N = 57). This illustrated that mixed emotions were experienced more following conflicting goals compared with a facilitating goals condition-on both a direct self-report measure of mixed emotions and a minimum index measure. The results also showed that mixed emotions were different to emotional conflict. Overall, goal conflict was found to be a source of mixed emotions, and it is feasible that such states have a role in resolving personal dilemmas.

Educational Accountability: A Qualitatively Driven Mixed-Methods Approach

Science.gov (United States)

Hall, Jori N.; Ryan, Katherine E.

2011-01-01

This article discusses the importance of mixed-methods research, in particular the value of qualitatively driven mixed-methods research for quantitatively driven domains like educational accountability. The article demonstrates the merits of qualitative thinking by describing a mixed-methods study that focuses on a middle school's system of…

7 CFR 810.801 - Definition of mixed grain.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Definition of mixed grain. 810.801 Section 810.801 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD... GRAIN United States Standards for Mixed Grain Terms Defined § 810.801 Definition of mixed grain. Any...

Design Patterns for Mixed-Method Research in HCI

NARCIS (Netherlands)

Robert Holwerda; Arthur Bennis; Lambert Zaad; René Bakker; Sabine Craenmehr; Stijn Hoppenbrouwers; Dick Lenior; Marjolein Jacobs; Koen van Turnhout; Ralph Niels

2014-01-01

In this paper we discuss mixed-method research in HCI. We report on an empirical literature study of the NordiCHI 2012 proceedings which aimed to uncover and describe common mixed-method approaches, and to identify good practices for mixed-methods research in HCI. We present our results as

Mixed and mixed-hybrid elements for the diffusion equation

International Nuclear Information System (INIS)

Coulomb, F.; Fedon-Magnaud, C.

1987-04-01

To solve the diffusion equation, one often uses a Lagrangian finite element method. We want to introduce the mixed elements which allow a simultaneous approximation of the same order for the flux and its gradient. Though the linear systems are not positive definite, it is possible to make them so by eliminating some of the unknowns

Balanced detection for self-mixing interferometry.

Science.gov (United States)

Li, Kun; Cavedo, Federico; Pesatori, Alessandro; Zhao, Changming; Norgia, Michele

2017-01-15

We propose a new detection scheme for self-mixing interferometry using two photodiodes for implementing a differential acquisition. The method is based on the phase opposition of the self-mixing signal measured between the two laser diode facet outputs. The subtraction of the two outputs implements a sort of balanced detection that improves the signal quality, and allows canceling of unwanted signals due to laser modulation and disturbances on laser supply and transimpedance amplifier. Experimental results demonstrate the benefits of differential acquisition in a system for both absolute distance and displacement-vibration measurement. This Letter provides guidance for the design of self-mixing interferometers using balanced detection.

Mixed-Mode Crack Growth in Wood

Directory of Open Access Journals (Sweden)

Octavian POP

2012-09-01

Full Text Available In timber elements the mixed mode dependsessentially of wood anatomy and load configuration.In these conditions, in order to evaluate the materialbehavior and the fracture process, it’s necessary toseparate the part of each mode. The mixed modeseparation allows evaluating the amplitude offracture mode. In the present paper, using a mixedmodecrack growth specimen made in Douglas fir,the mixed mode crack growth process is studythanks to marks tracking method. Using the markstracking method the characteristic displacementsassociated to opening and shear mode aremeasured. From the experimental measurements,the energy release rate associated to opening andshear modes is calculated into to account the crackadvancement during the test.