WorldWideScience

Sample records for just-in-time drilling deep

  1. Just in Time Assurance

    Science.gov (United States)

    2010-04-01

    Just in Time Assurance Ji Al F PhD U i it f Id hm ves- oss, , n vers y o a o Director Center for Secure and Dependable Computing W. Mark Vanfleet...COVERED 00-00-2010 to 00-00-2010 4. TITLE AND SUBTITLE Just in Time Assurance 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6...discusses how practical and affordable recertification can become the norm instead of the rare exception 2 What Does Just in Time Mean? Manufacturing

  2. Deep Drilling Technology of China

    Institute of Scientific and Technical Information of China (English)

    Ni Rongfu

    1995-01-01

    @@ Since the drilling of well Songji-6 by the drilling crew No. 32139 in Daqing in 1963,there havebeen some 1600 over 4 000 m deep wells completed till 1993, among which two are above 7 000 m in depth.

  3. New optimized drill pipe size for deep-water, extended reach and ultra-deep drilling

    Energy Technology Data Exchange (ETDEWEB)

    Jellison, Michael J.; Delgado, Ivanni [Grant Prideco, Inc., Hoston, TX (United States); Falcao, Jose Luiz; Sato, Ademar Takashi [PETROBRAS, Rio de Janeiro, RJ (Brazil); Moura, Carlos Amsler [Comercial Perfuradora Delba Baiana Ltda., Rio de Janeiro, RJ (Brazil)

    2004-07-01

    A new drill pipe size, 5-7/8 in. OD, represents enabling technology for Extended Reach Drilling (ERD), deep water and other deep well applications. Most world-class ERD and deep water wells have traditionally been drilled with 5-1/2 in. drill pipe or a combination of 6-5/8 in. and 5-1/2 in. drill pipe. The hydraulic performance of 5-1/2 in. drill pipe can be a major limitation in substantial ERD and deep water wells resulting in poor cuttings removal, slower penetration rates, diminished control over well trajectory and more tendency for drill pipe sticking. The 5-7/8 in. drill pipe provides a significant improvement in hydraulic efficiency compared to 5-1/2 in. drill pipe and does not suffer from the disadvantages associated with use of 6-5/8 in. drill pipe. It represents a drill pipe assembly that is optimized dimensionally and on a performance basis for casing and bit programs that are commonly used for ERD, deep water and ultra-deep wells. The paper discusses the engineering philosophy behind 5-7/8 in. drill pipe, the design challenges associated with development of the product and reviews the features and capabilities of the second-generation double-shoulder connection. The paper provides drilling case history information on significant projects where the pipe has been used and details results achieved with the pipe. (author)

  4. DOBAVA "JUST IN TIME" PROIZVAJALCU AVTOMOBILOV RENAULT

    OpenAIRE

    Nemanič, Marjana

    2010-01-01

    Diplomsko delo je sestavljeno iz uvoda, teoretičnega in praktičnega dela. V uvodu je opredeljeno področje, ki je predmet raziskave, namen in cilji, osnovne trditve, predpostavke, omejitve raziskave in predvidene metode raziskovanja. Teoretični del opisuje logistične procese, dobavo »just in time«, elektronsko izmenjavo podatkov (EDI), logistične procese v SAP. V ožjem pomenu pomeni dobava »just in time« dobavo ravno ob pravem času. Širše pa pomeni obvladovanje poslovnih procesov v vsakem ...

  5. Active Suppression of Drilling System Vibrations For Deep Drilling

    Energy Technology Data Exchange (ETDEWEB)

    Raymond, David W.; Blankenship, Douglas A.; Buerger, Stephen; Mesh, Mikhail; Radigan, William Thomas; Su, Jiann-Cherng

    2015-10-01

    The dynamic stability of deep drillstrings is challenged by an inability to impart controllability with ever-changing conditions introduced by geology, depth, structural dynamic properties and operating conditions. A multi-organizational LDRD project team at Sandia National Laboratories successfully demonstrated advanced technologies for mitigating drillstring vibrations to improve the reliability of drilling systems used for construction of deep, high-value wells. Using computational modeling and dynamic substructuring techniques, the benefit of controllable actuators at discrete locations in the drillstring is determined. Prototype downhole tools were developed and evaluated in laboratory test fixtures simulating the structural dynamic response of a deep drillstring. A laboratory-based drilling applicability demonstration was conducted to demonstrate the benefit available from deployment of an autonomous, downhole tool with self-actuation capabilities in response to the dynamic response of the host drillstring. A concept is presented for a prototype drilling tool based upon the technical advances. The technology described herein is the subject of U.S. Patent Application No. 62219481, entitled "DRILLING SYSTEM VIBRATION SUPPRESSION SYSTEMS AND METHODS", filed September 16, 2015.

  6. Optimisation and Just-in-Time

    Directory of Open Access Journals (Sweden)

    V. Beran

    2002-01-01

    Full Text Available Arranging production activities to fit in with other construction activities is one of the basic ideas of the Just-in-Time approach. In the construction industry it has never been very fully applied. This is a mistake [1]. Construction works, particularly expensive parts of them, are a field where the approach can be and should be applied.

  7. Just-in-time elements and benefits

    CERN Document Server

    García-Alcaraz, Jorge Luis

    2016-01-01

    This book reports the elements required for implementing Just in Time (JIT) technique in companies. The main reasons for low implementation processes and the main benefits from the successful implementation of them are highlighted in this book. Structural equation models are presented to help identify the essential elements in JIT.

  8. Just-in-Time Smoothing Through Batching

    OpenAIRE

    Wieslaw Kubiak; Mesut Yavuz

    2008-01-01

    This paper presents two methods to solve the production smoothing problem in mixed-model just-in-time (JIT) systems with large setup and processing time variability between different models the systems produce. The problem is motivated by production planning at a leading U.S. automotive pressure hose manufacturer. One method finds all Pareto-optimal solutions that minimize total production rate variation of models and work in process (WIP), and maximize system utilization and responsiveness. ...

  9. Drilling to Supercritical Conditions: the Iceland Deep Drilling Project (IDDP).

    Science.gov (United States)

    Elders, W. A.; Fridleifsson, G. O.; Saito, S.

    2001-05-01

    Geothermal wells produce mixtures of water and steam in the range 200-350 C, however the high cost of drilling and completing these wells relative to the cost of oil and gas wells is a hindrance to the geothermal industry worldwide. Rather than trying only to reduce this cost, the Icelandic Deep Drilling Project (IDDP) is trying the approach of increasing the power output per well. Funded by a consortium of energy companies in Iceland, the IDDP plans to drill a series of boreholes, to depths greater than 4 to 5 km. The aim is to produce hydrothermal fluids systems at temperatures of 400-500 C, and to investigate the technical and economic aspects of producing supercritical fluids for use in power generation and other energy intensive processes, such as mineral recovery. The first phase feasibility and site selection study began in March 2001 and drilling of the first deep well is expected to begin in 2003. The IDDP faces difficult technical challenges to drill, complete, sample and maintain wells under hot, and potentially acid, conditions. However the IDDP also presents the opportunity to investigate very high-temperature hydrothermal regimes that have rarely been available for direct study. It will address important scientific issues, ranging from the coupling of magmatic and hydrothermal systems, supercritical phenomena, the transition from brittle to ductile behavior at relatively shallow depths, to land based analogues of submarine hot springs, the black smokers of the mid-ocean ridges. Fortunately, the IDDP industrial consortium is willing, or even anxious, to integrate its engineering activities with scientific investigations. The consortium will seek international participation by scientists and engineers to formulate a strategy to achieve both the engineering and scientific goals of the IDDP.

  10. The Auto-Gopher Deep Drill

    Science.gov (United States)

    Badescu, Mircea

    2014-01-01

    Subsurface penetration by coring, drilling or abrading is of great importance for a large number of space and earth applications. An Ultrasonic/Sonic Drill/Corer (USDC) has been in development at JPL's Nondestructive Evaluation and Advanced Actuators (NDEAA) lab as an adaptable tool for many of these applications. The USDC uses a novel drive mechanism to transform the high frequency ultrasonic or sonic vibrations of the tip of a horn into a lower frequency sonic hammering of a drill bit through an intermediate free-flying mass. The USDC device idea has been implemented at various scales from handheld drills to large diameter coring devices. A series of computer programs that model the function and performance of the USDC device were developed and were later integrated into an automated modeling package. The USDC has also evolved from a purely hammering drill to a rotary hammer drill as the design requirements increased form small diameter shallow drilling to large diameter deep coring. A synthesis of the Auto-Gopher development is presented in this paper.

  11. Just in Time to Flip Your Classroom

    Science.gov (United States)

    Lasry, Nathaniel; Dugdale, Michael; Charles, Elizabeth

    2014-01-01

    With advocates like Sal Khan and Bill Gates, flipped classrooms are attracting an increasing amount of media and research attention.2 We had heard Khan's TED talk and were aware of the concept of inverted pedagogies in general. Yet it really hit home when we accidentally flipped our classroom. Our objective was to better prepare our students for class. We set out to effectively move some of our course content outside of class and decided to tweak the Just-in-Time Teaching approach (JiTT).3 To our surprise, this tweak—which we like to call the flip-JiTT—ended up completely flipping our classroom. What follows is narrative of our experience and a procedure that any teacher can use to extend JiTT to a flipped classroom.

  12. Just in Time to Flip Your Classroom

    CERN Document Server

    Lasry, Nathaniel; Charles, Elizabeth

    2013-01-01

    With advocates like Sal Khan and Bill Gates, flipped classrooms are attracting an increasing amount of media and research attention. We had heard Khan's TED talk and were aware of the concept of inverted pedagogies in general. Yet, it really hit home when we accidentally flipped our classroom. Our objective was to better prepare our students for class. We set out to effectively move some of our course content outside of class and decided to tweak the Just-in-Time-Teaching approach (JiTT). To our surprise, this tweak - which we like to call the flip-JiTT - ended up completely flipping our classroom. What follows is narrative of our experience and a procedure that any teacher can use to extend JiTT to a flipped classroom.

  13. Quality of Just-in-Time Requirements: Just-Enough and Just-in-Time

    NARCIS (Netherlands)

    Heck, P.M.

    2016-01-01

    The goal of this thesis was to obtain a deeper understanding of the notion of quality for Just-in-Time (JIT) Requirements. JIT requirements are the opposite of up-front requirements. JIT requirements are not analyzed or defined until they are needed meaning that development is allowed to begin with

  14. Quality of Just-in-Time Requirements: Just-Enough and Just-in-Time

    NARCIS (Netherlands)

    Heck, P.M.

    2016-01-01

    The goal of this thesis was to obtain a deeper understanding of the notion of quality for Just-in-Time (JIT) Requirements. JIT requirements are the opposite of up-front requirements. JIT requirements are not analyzed or defined until they are needed meaning that development is allowed to begin with

  15. Reporting from the Iceland Deep Drilling Project

    Science.gov (United States)

    Urban, Karl

    2017-04-01

    Geoscience-related topics are in many cases difficult to communicate to the public: Often they include dead soil which not easily tells lively stories. And it is hard to sell those topics to editors of public media. In addition the topics might also be politically supercharged if they are resource-related with a visible environmental impact. Therefore any researcher involved might be overcautious while talking to journalists. With a grant from the EGU Science Journalist Fellowship I travelled to Iceland in autumn 2016 to report about the Iceland Deep Drilling Project (IDDP). The project which started just weeks prior to my arrival aimed to drill the deepest borehole in a volcanically active region. During earlier trials the borehole collapsed or the drill string unintentionally hit magma. If successful the IDDP promises a much higher level of geothermal energy harvested. The IDDP was therefore ideally suited to be sold to public media outlets since Iceland's volcanic legacy easily tells a lively story. But the drilling's potential environmental impact makes it a political topic in Iceland - even though geothermal energy has a positive public perception. Therefore the IDDP included some pitfalls I observed several times before while reporting about geoscience research. Those could be circumvented if researchers and journalists knew better about their expectations before any interview takes place.

  16. Deep drilling for geothermal energy in Finland

    Science.gov (United States)

    Kukkonen, Ilmo

    2016-04-01

    There is a societal request to find renewable CO2-free energy resources. One of the biggest such resources is provided by geothermal energy. In addition to shallow ground heat already extensively used in Finland, deep geothermal energy provides an alternative so far not exploited. Temperatures are high at depth, but the challenge is, how to mine the heat? In this presentation, the geological and geophysical conditions for deep geothermal energy production in Finland are discussed as well as challenges for drilling and conditions at depth for geothermal energy production. Finland is located on ancient bedrock with much lower temperatures than geologically younger volcanically and tectonically active areas. In order to reach sufficiently high temperatures drilling to depths of several kilometres are needed. Further, mining of the heat with, e.g., the principle of Enhanced Geothermal System (EGS) requires high hydraulic conductivity for efficient circulation of fluid in natural or artificial fractures of the rock. There are many issues that must be solved and/or improved: Drilling technology, the EGS concept, rock stress and hydraulic fracturing, scale formation, induced seismicity and ground movements, possible microbial activity, etc. An industry-funded pilot project currently in progress in southern Finland is shortly introduced.

  17. Difficulties of Just-In-Time Implementation

    Directory of Open Access Journals (Sweden)

    Mandeep Singh

    2013-06-01

    Full Text Available Many companies experience difficulty in implementing Just-in-Time (JIT in their manufacturing system. Based on observations, the article argues that the problem is partly due to confusion about JIT and its implications and partly due to a desire to implement JIT within an existing organisational structure. A four-level classification system is presented as a way of summarising the different degrees of JIT implementation and their difficulties.JIT philosophy has been of great interest to the manufacturers and researchers over the past few decades. JIT systems are designed to produce the goods & deliver services as and when required.JIT systems are capable to attain the far-reaching productivity and quality standards. Numerous benefits have been claimed by the firms implementing JIT across the World. Efforts are being made day-by-day to look into the benefits and their feasibility in the Manufacturing Industries. Despite the profound interest in it, the extent of implementation in India has not been satisfactory. Many firms which had benefitted from JIT systems appear to address only a few features, rather than looking into the whole philosophy of JIT. The paper attempts to address the necessary initiatives required to be taken by the Management of Indian Manufacturing Industry for the implementation of the various JIT subsets, through a survey based on previous literature. Further, it analyzes and concludes the modification of procedures and operations required for its successful implementation along with the challenges encountered during the JIT philosophy implementation.

  18. The implementation of Just In Time manufacturing through team leaders

    OpenAIRE

    Carr, P. D.

    1995-01-01

    This thesis examines the implementation of Just In Time manufacturing through team leaders. Western industry has failed to achieve the performance benefits experienced in Japan with the introduction of Just In Time, a manufacturing system based on the relentless elimination of waste. Criticism is emerging of the experience of employees of Just In Time. It is argued that stress levels are high and motivation is low. However, Just In Time relies on a new, more active, role for em...

  19. Towards Just-In-Time Partial Evaluation of Prolog

    Science.gov (United States)

    Bolz, Carl Friedrich; Leuschel, Michael; Rigo, Armin

    We introduce a just-in-time specializer for Prolog. Just-in-time specialization attempts to unify of the concepts and benefits of partial evaluation (PE) and just-in-time (JIT) compilation. It is a variant of PE that occurs purely at runtime, which lazily generates residual code and is constantly driven by runtime feedback.

  20. Deep water challenges for drilling rig design

    Energy Technology Data Exchange (ETDEWEB)

    Roth, M. [Transocean Sedco Forex, Houston, TX (United States)

    2001-07-01

    Drilling rigs designed for deep water must meet specific design considerations for harsh environments. The early lessons for rig design came from experiences in the North Sea. Rig efficiency and safety considerations must include structural integrity, isolated/redundant ballast controls, triple redundant DP systems, enclosed heated work spaces, and automated equipment such as bridge cranes, pipe handling gear, offline capabilities, subsea tree handling, and computerized drill floors. All components must be designed to harmonize man and machine. Some challenges which are unique to Eastern Canada include frequent storms and fog, cold temperature, icebergs, rig ice, and difficult logistics. This power point presentation described station keeping and mooring issues in terms of dynamic positioning issues. The environmental influence on riser management during forced disconnects was also described. Design issues for connected deep water risers must insure elastic stability, and control deflected shape. The design must also keep stresses within acceptable limits. Codes and standards for stress limits, flex joints and tension were also presented. tabs., figs.

  1. Instrumentation for the PICO deep ice coring drill

    OpenAIRE

    1994-01-01

    An electronic data collection and control system has been developed for the PICO 13.2cm deep ice coring drill. It monitors a variety of drilling parameters including inclination, depth, temperature, pressure, RPM, weight and others. It also displays this data for the drill operator and allows the operator to control speed and direction of the drill motor. The display program allows setting limits on all parameters so an alarm sounds if anything goes wrong. This instrumentation package will be...

  2. Deep Scientific Drilling at Koyna, India

    Science.gov (United States)

    Gupta, H. K.

    2011-12-01

    The Stable Continental Region (SCR) earthquakes tend to claim more human lives and inflict heavier financial losses as they occur where not expected and the local and regional preparedness to mitigate such catastrophes is minimal. Artificial water Reservoir Triggered Seismicity (RTS), most prominent in SCR, provides an exceptional window to comprehend genesis of such earthquakes. Since the first scientific reporting of the RTS at the Boulder Dam, USA during 1930s, over 100 cases of RTS have been reported globally. Damaging earthquakes exceeding M 6 have occurred at Hsingfengkiang (China), Kariba (Zambia -Zimbabwe border), Kremasta (Greece) and Koyna (India). It is debated that the 2008 M 7.8 Sichuan earthquake in China, which claimed over 80,000 human lives was triggered by filling of a nearby reservoir. Located close to the west coast of India, Koyna is a classical site of RTS, where triggered earthquakes have been occurring since the impoundment in 1962, including the largest RTS earthquake of M 6.3 on December 10, 1967 which claimed over 200 human lives and destroyed Koyna town. Over the past 49 years 22 earthquakes of M ≥ 5 and several thousand smaller earthquakes have occurred in a restricted area of 20 X 30 sq. km. with no other seismic activity within 50 km of the Koyna Dam. The latest M 5.1 earthquake occurred on December 12, 2009. Although several studies have clearly established the association of continued RTS at Koyna with precipitation driven loading and unloading of the Koyna and Warna reservoirs, the trigger mechanism is little understood. Our knowledge about the physical properties of rocks and fluids in the fault zones and how they affect the build-up of stress for an extended period is limited by the lack of data from the near field region. A deep bore hole of up to 7 km depth at a scientifically and logistically suitable location is under an advance stage of planning. A detailed workshop and field visits involving some 50 scientists from 10

  3. Downhole tools can increase deep drilling rig productivity

    Energy Technology Data Exchange (ETDEWEB)

    Thiessen, D.A.; Doiron, H.H.

    1983-01-01

    Explains how there is much to be gained by better utilization of current drilling equipment, particularly for the much more expensive deep drilling. Optimized mud weight, better hydraulics, and higher rpm offer the best opportunities with increased bit weight as a fourth possibility. Current RandD in such areas as shock absorbers, downhole motors, new materials and designs for bits, and improved instrumentation will decrease drilling costs. Concludes that a reasonable projection is that drilling time for deep wells can be halved within the next decade.

  4. Evaluation of commercial drilling and geological software for deep drilling applications

    Science.gov (United States)

    Pierdominici, Simona; Prevedel, Bernhard; Conze, Ronald; Tridec Team

    2013-04-01

    The avoidance of operational delays, financial losses and drilling hazards are key indicators for successful deep drilling operations. Real-time monitoring of drilling operation data as well as geological and petrophysical information obtained during drilling provide valuable knowledge that can be integrated into existing geological and mechanical models in order to improve the drilling performance. We have evaluated ten different geological and drilling software packages capable to integrate real-time drilling and planning data (e.g. torque, drag, well path, cementing, hydraulic data, casing design, well control, geo-steering, cost and time) as well as other scientific and technical data (i.e. from drilling core, geophysical downhole logging, production test) to build geological and geophysical models for planning of further deep drillings in a given geological environment. To reach this goal, the software has to be versatile to handle different data formats from disciplines such as geology, geophysics, petrophysics, seismology and drilling engineering as well as data from different drilling targets, such as geothermal fluids, oil/gas, water reservoirs, mining purpose, CO2 sequestration, or scientific goals. The software must be capable to analyze, evaluate and plan in real-time the next drilling steps in the best possible way and under safe conditions. A preliminary geological and geophysical model with the available data from site surveys and literature is built to address a first drilling plan, in which technical and scientific aspects are taken into consideration to perform the first drilling (wildcat well). During the drilling, the acquired scientific and technical data will be used to refine the previous geological-drilling model. The geological model hence becomes an interactive object strongly linked to the drilling procedure, and the software should allow to make rapid and informed decisions while drilling, to maximize productivity and minimize drilling

  5. Just-in-Time Information Delivery System for Passenger Assistance

    National Research Council Canada - National Science Library

    NOZUE, Michiko; OZAKI, Naoya; TSUCHIYA, Ryuji

    2006-01-01

    ... and integrate them to make their travel decisions. We first provide a brief overview of an intermodal passenger support system called "CyberGuide," then propose an intelligent and just-in-time information retrieval agent that takes into consideration...

  6. Deep learning in assessment of drill condition on the basis of images of drilled holes

    Science.gov (United States)

    Kurek, Jaroslaw; Swiderski, Bartosz; Jegorowa, Albina; Kruk, Michal; Osowski, Stanislaw

    2017-02-01

    This paper presents novel approach to drill condition assessment using deep learning. The assessment regarding level of the drill wear is done on the basis of the drilled hole images. Two states of the drill are taken into account: the sharp enough to continue production and worn out. The decision is taken on the basis of the shape of hole and also the level of hole shredding. In this way the drill condition is associated with the problem of image analysis and classification. Novel approach to this classification task in the form of deep learning has been applied in solving this problem. The important advantage of this method is great simplification of the recognition procedure, since any handy craft prepared features are not needed and the focus may be concentrated on the most interesting aspects of data mining and machine learning. The obtained results belong to the best in comparison to other approaches to the problem solution.

  7. Outokumpu Deep Drill Hole: Window to the Precambrian bedrock

    Science.gov (United States)

    Heinonen, Suvi; Kietäväinen, Riikka; Ahonen, Lasse; Kukkonen, Ilmo

    2017-04-01

    Outokumpu Deep Drill Hole is located in eastern Finland, at latitude 62°43'4'' N and longitude 29°3'43'' E. This 2516 m long and fully cored deep hole has been utilized as a geolaboratory open for researchers worldwide since it was drilled in 2004-2005. The 220 mm diameter drill hole is open without a casing (excluding the uppermost 40 m) and thus provides a direct access to in situ conditions to 2.5 km depth. There is a wide range of wire-line logs carried out by the drilling contractor and later by ICDP (International Continental Scientific Drilling Program) in several logging sessions for geothermal, hydrogeological and deep biosphere studies. Lithology, metamorphism, fluid inclusions, density, magnetic properties, seismic velocities and thermal properties of the drill core have been studied by several international groups. The hole has kept open since the end of drilling enabling future studies to be conducted in it. The drill hole is situated in the southwestern part of the Outokumpu historical mining district famous for its Cu-Co-Zn sulfide deposits. These sulfide deposits are hosted by 1.96 Ga old ophiolitic rock types, known as the Outokumpu assemblage, also penetrated by the deep drill hole at 1314-1515 m depth. Laboratory and in situ petrophysical measurements have provided valuable information about physical properties of the typical rocks of the area that can be utilized in the mineral exploration efforts. The drill site of Outokumpu was chosen based on strong reflectivity observed in the high resolution seismic profiles acquired earlier in the area. Outokumpu Deep Drill Hole revealed that these reflections originate from the acoustic impedance variations caused by the ore hosting Outokumpu assemblage. In 2006, surface seismic reflection and vertical seismic profiling (VSP) data were measured in the drill site, and these data show that not only is Outokumpu assemblage rocks reflective but also water bearing fracture at 965 m depth is observed as a

  8. Just in Time Teaching: A Strategy to Encourage Students’ Engagement

    Directory of Open Access Journals (Sweden)

    Lorena Andrea López Cupita

    2016-10-01

    Full Text Available This qualitative research study was carried out with two groups of students at a beginner English level; the students were in the fourth semester of psychology at a Colombian university. The overall aim of this action research study was to analyze learners’ perceptions of the strategy Just in Time Teaching in a web 2.0. The data were collected through students’ artifacts, journals, and interviews. Results of this study indicate that students perceived the strategy of Just in Time Teaching as a means to engage them in the designed activities; it was manifested by investing time to extend knowledge and promoting participation by reducing the affective filter.

  9. Penerapan Just in Time dalam Sistem Pembelian dan Sistem Produksi

    Directory of Open Access Journals (Sweden)

    Heri Sukendar W.

    2011-05-01

    Full Text Available Just in Time is a management philosophy, techniques, or methods be comprehensive in order to buy raw materials and producing goods only when necessary and timely to be used at every stage we have available. Research was conducted by doing library research. Many problems faced by the industry, especially the existence of inefficiency in the system of purchasing and production. With the implementation of Just in Time, then the problem can be overcome and eventually going savings that will increase corporate profits. 

  10. Penerapan Just in Time dalam Sistem Pembelian dan Sistem Produksi

    Directory of Open Access Journals (Sweden)

    Heri Sukendar W

    2011-04-01

    Full Text Available Just in Time is a management philosophy, techniques, or methods be comprehensive in order to buy raw materials and producing goods only when necessary and timely to be used at every stage we have available. Research was conducted by doing library research. Many problems faced by the industry, especially the existence of inefficiency in the system of purchasing and production. With the implementation of Just in Time, then the problem can be overcome and eventually going savings that will increase corporate profits.

  11. Environmentally Assisted Cracking of Drill Pipes in Deep Drilling Oil and Natural Gas Wells

    Science.gov (United States)

    Ziomek-Moroz, M.

    2012-06-01

    Corrosion fatigue (CF), hydrogen induced cracking (HIC) and sulfide stress cracking (SSC), or environmentally assisted cracking (EAC) have been identified as the most challenging causes of catastrophic brittle fracture of drill pipes during drilling operations of deep oil and natural gas wells. Although corrosion rates can be low and tensile stresses during service can be below the material yield stress, a simultaneous action between the stress and corrosive environment can cause a sudden brittle failure of a drill component. Overall, EAC failure consists of two stages: incubation and propagation. Defects, such as pits, second-phase inclusions, etc., serve as preferential sites for the EAC failure during the incubation stage. Deep oil and gas well environments are rich in chlorides and dissolved hydrogen sulfide, which are extremely detrimental to steels used in drilling operations. This article discusses catastrophic brittle fracture mechanisms due to EAC of drill pipe materials, and the corrosion challenges that need to be overcome for drilling ultra-deep oil and natural gas wells.

  12. Drilling deep in South Pole Ice

    CERN Document Server

    Karg, Timo

    2014-01-01

    To detect the tiny flux of ultra-high energy neutrinos from active galactic nuclei or from interactions of highest energy cosmic rays with the microwave background photons needs target masses of the order of several hundred cubic kilometers. Clear Antarctic ice has been discussed as a favorable material for hybrid detection of optical, radio and acoustic signals from ultra-high energy neutrino interactions. To apply these technologies at the adequate scale hundreds of holes have to be drilled in the ice down to depths of about 2500 m to deploy the corresponding sensors. To do this on a reasonable time scale is impossible with presently available tools. Remote drilling and deployment schemes have to be developed to make such a detector design reality. After a short discussion of the status of modern hot water drilling we present here a design of an autonomous melting probe, tested 50 years ago to reach a depth of about 1000 m in Greenland ice. A scenario how to build such a probe today with modern technologies...

  13. Just-In-Time Inventory: Proceed with caution!

    Energy Technology Data Exchange (ETDEWEB)

    Katterhenry, W.E. [Katterhenry and Associates, Inc., Naperville, IL (United States)

    1995-10-01

    Today`s economic climate, the emerging of independent power producers, pending deregulation, and environmental restraints are forcing the utility industry to adopt cost cutting measures in an effort to be more competitive and survive in tomorrow`s market place. The cost cutting measure addressed in this paper is ``Just-In-Time Inventory`` of coal for fossil fueled power plants.

  14. Just in Time Teaching: A Strategy to Encourage Students' Engagement

    Science.gov (United States)

    López Cupita, Lorena Andrea

    2016-01-01

    This qualitative research study was carried out with two groups of students at a beginner English level; the students were in the fourth semester of psychology at a Colombian university. The overall aim of this action research study was to analyze learners' perceptions of the strategy "Just in Time Teaching" in a web 2.0. The data were…

  15. Just in Time Research: Data Breaches in Higher Education

    Science.gov (United States)

    Grama, Joanna

    2014-01-01

    This "Just in Time" research is in response to recent discussions on the EDUCAUSE Higher Education Information Security Council (HEISC) discussion list about data breaches in higher education. Using data from the Privacy Rights Clearinghouse, this research analyzes data breaches attributed to higher education. The results from this…

  16. Investigation of the feasibility of deep microborehole drilling

    Energy Technology Data Exchange (ETDEWEB)

    Dreesen, D.S. [Los Alamos National Lab., NM (United States); Cohen, J.H. [Maurer Engineering, Inc., Houston, TX (United States)

    1997-01-01

    Recent advances in sensor technology, microelectronics, and telemetry technology make it feasible to produce miniature wellbore logging tools and instrumentation. Microboreholes are proposed for subterranean telemetry installations, exploration, reservoir definition, and reservoir monitoring this assumes that very small diameter bores can be produced for significantly lower cost using very small rigs. A microborehole production concept based on small diameter hydraulic or pneumatic powered mechanical drilling, assemblies deployed on coiled tubing is introduced. The concept is evaluated using, basic mechanics and hydraulics, published theories on rock drilling, and commercial simulations. Small commercial drill bits and hydraulic motors were selected for laboratory scale demonstrations. The feasibility of drilling deep, directional, one to two-inch diameter microboreholes has not been challenged by the results to date. Shallow field testing of prototype systems is needed to continue the feasibility investigation.

  17. Chesapeake Bay Impact Structure Deep Drilling Project Completes Coring

    Directory of Open Access Journals (Sweden)

    the Scientific Staff of the Chesapeake Bay Impact Structure Deep Drilling Project

    2006-09-01

    Full Text Available The Chesapeake Bay Impact Structure Deep Drilling Project (CBIS Project completed its coring operations during September–December 2005 and April–May 2006. Cores were collected continuously to a total depth of 1766 m. The recovered section consists of 1322 m of impactites beneath 444 m of post-impact continental shelf sediments.The CBIS Project is a joint venture of the International Continental Scientifi c Drilling Program (ICDP and the U.S. Geological Survey (USGS. Project activities began with a planning workshop in September 2003 attended by sixtythree scientists from ten countries. Field operations began with site preparation in July 2005, and coring began in September 2005. Drilling, Observation and Sampling of theEarth’s Continental Crust (DOSECC was the general contractor for the drilling operations throughout 2005.

  18. HOPE: Just-in-time Python compiler for astrophysical computations

    Science.gov (United States)

    Akeret, Joel; Gamper, Lukas; Amara, Adam; Refregier, Alexandre

    2014-11-01

    HOPE is a specialized Python just-in-time (JIT) compiler designed for numerical astrophysical applications. HOPE focuses on a subset of the language and is able to translate Python code into C++ while performing numerical optimization on mathematical expressions at runtime. To enable the JIT compilation, the user only needs to add a decorator to the function definition. By using HOPE, the user benefits from being able to write common numerical code in Python while getting the performance of compiled implementation.

  19. Exploring frontiers of the deep biosphere through scientific ocean drilling

    Science.gov (United States)

    Inagaki, F.; D'Hondt, S.; Hinrichs, K. U.

    2015-12-01

    Since the first deep biosphere-dedicated Ocean Drilling Program (ODP) Leg 201 using the US drill ship JOIDES Resolution in 2002, scientific ocean drilling has offered unique opportunities to expand our knowledge of the nature and extent of the deep biosphere. The latest estimate of the global subseafloor microbial biomass is ~1029cells, accounting for 4 Gt of carbon and ~1% of the Earth's total living biomass. The subseafloor microbial communities are evolutionarily diverse and their metabolic rates are extraordinarily slow. Nevertheless, accumulating activity most likely plays a significant role in elemental cycles over geological time. In 2010, during Integrated Ocean Drilling Program (IODP) Expedition 329, the JOIDES Resolutionexplored the deep biosphere in the open-ocean South Pacific Gyre—the largest oligotrophic province on our planet. During Expedition 329, relatively high concentrations of dissolved oxygen and significantly low biomass of microbial populations were observed in the entire sediment column, indicating that (i) there is no limit to life in open-ocean sediment and (ii) a significant amount of oxygen reaches through the sediment to the upper oceanic crust. This "deep aerobic biosphere" inhabits the sediment throughout up to ~37 percent of the world's oceans. The remaining ~63 percent of the oceans is comprised of higher productivity areas that contain the "deep anaerobic biosphere". In 2012, during IODP Expedition 337, the Japanese drill ship Chikyu explored coal-bearing sediments down to 2,466 meters below the seafloor off the Shimokita Peninsula, Japan. Geochemical and microbiological analyses consistently showed the occurrence of methane-producing communities associated with the coal beds. Cell concentrations in deep sediments were notably lower than those expected from the global regression line, implying that the bottom of the deep biosphere is approached in these beds. Taxonomic composition of the deep coal-bearing communities profoundly

  20. Italian Experience and Problems in Deep Geothermal Drilling

    Energy Technology Data Exchange (ETDEWEB)

    Cigni, U.; Del Gaudio, P.; Fabbri, F.

    1981-01-01

    Geothermal exploration at depth is being conducted in the Larderello area of Italy, in order to ascertain whether it is possible to extract geothermal fluids from the layers which underlie the reservoir now being exploited. The main operating problems are caused by the high thermality and the chemical corrosiveness of the fluids encountered; and by the practical problems involved in drilling without circulation to the surface in mainly hard but anhomogeneous fractured formations. The technology employed for deep geothermal well drilling plays an important role in this research. In deep geothermal well drilling it is essential that the equipment and the materials employed are suitable for use in areas which are characterized by high thermality and chemical corrosiveness. The results of the experiences gained in Italy concerning the materials and tools employed in deep geothermal exploration are presented. The various problems involved are described in detail and particular mention is made of drift control, fishing operations, cementation of the deep casing, control of the circulation fluid, and choice of the tubular materials.

  1. The Effects of Guide Pads on Bore Diameter Enlargement Magnitude in Deep Hole Drilling

    OpenAIRE

    Zhang Huang; Shen Xingquan; Li Yaoming; Yang Fuhe; Kwon Paul

    2016-01-01

    Deep hole machining accuracy plays a crucial role in product’s quality. The results of an investigation into the machining accuracy of deep drilling holes which highlights problems of bore diameter enlargement magnitude assessment are presented in this paper. Through the study of BTA deep drilling tool properties and mechanism, as well as the formation rule of deep hole surface, clarified the burnishing mechanism of guide pad in deep hole drilling, and obtained the directly relationship betwe...

  2. Progress Report on the Iceland Deep Drilling Project (IDDP

    Directory of Open Access Journals (Sweden)

    Wilfred A. Elders

    2007-03-01

    Full Text Available The Iceland Deep Drilling Project (IDDP is a project of “Deep Vision”, a consortium of the government and the three leading energy companies in Iceland. It aims to improve the economics of geothermal energy production by exploring for supercritical hydrothermal fluids as a possible energy source. This will require drilling to depths of 4 to 5 km in order to reach temperatures of 400°C–600°C. From the outset, Deep Vision, recognizing that a broad scale of studies would be necessary in order to explore the little understood supercritical environment, welcomed the inclusion of basic scientific studies in the IDDP and invited participation from the international scientific community, to the mutual advantage of both industrial and scientific participants (Fridleifsson and Albertsson, 2000.

  3. Contabilidade gerencial como apoio ao "just in time"

    OpenAIRE

    Costa, Sérgio De Carvalho

    2010-01-01

    Descreve as técnicas da filosofia "Just in Time" e apresenta as modificações necessárias aos Sistemas Gerencias para que se tornem coerentes com a filosofia JIT, bem como meçam adequadamente a melhoria contínua da Empresa. Critica tanto o Custeio' Direto como o Custeio por Absorção, apresentando como alternativa o Custeio "ABC". Mostra como o JIT facilita o Custeio dos Produtos e destaca os aspectos estratégicos da Avaliação de Desempenho. Finalmente discorre sobre um estudo de...

  4. Los sistemas just-in-time/Kanban, un paradigma productivo

    OpenAIRE

    Huberto Juárez Núñez

    2002-01-01

    Los sistemas just-in-time/Kanban surgen en el contexto de la reconstrucción de la economíajaponesa hacia mediados del siglo XX. Fueron las empresas automotrices (especialmente Toyota)las que lograron hacer un análisis crítico de las debilidades y fortalezas del sistema fordista, y enese camino encontraron rutas alternativas que mostraron su importancia cuando en el proceso desu internacionalización dieron respuesta a problemas sistémicos del capitalismo. Su impacto en lasestructuras productiv...

  5. Development Status and Challenge of PetroChina's Deep Drilling Technologies

    Institute of Scientific and Technical Information of China (English)

    Wang Haige; Zheng Xinquan

    2005-01-01

    @@ Deep and ultra-deep drilling technologies have been developed since the late 1930s, and got great achievements especially in the last two decades. The depth of well completion has even reached to 12 kilometers. Several countries, such as US and some European countries,are leading in the advanced deep and ultra-deep drilling technologies in the world. In recent years, nevertheless,PetroChina has also made big progress in mechanical penetration rate (ROP), drilling period, amount of drilling bit used in a single well of deep drilling as well as in deep drilling equipments. Compared with the high-level technologies of complicated deep drilling in the world,PetroChina still has a long way to go.

  6. Deep drilling in the Chesapeake Bay impact structure - An overview

    Science.gov (United States)

    Gohn, G.S.; Koeberl, C.; Miller, K.G.; Reimold, W.U.

    2009-01-01

    The late Eocene Chesapeake Bay impact structure lies buried at moderate depths below Chesapeake Bay and surrounding landmasses in southeastern Virginia, USA. Numerous characteristics made this impact structure an inviting target for scientific drilling, including the location of the impact on the Eocene continental shelf, its threelayer target structure, its large size (??85 km diameter), its status as the source of the North American tektite strewn field, its temporal association with other late Eocene terrestrial impacts, its documented effects on the regional groundwater system, and its previously unstudied effects on the deep microbial biosphere. The Chesapeake Bay Impact Structure Deep Drilling Project was designed to drill a deep, continuously cored test hole into the central part of the structure. A project workshop, funding proposals, and the acceptance of those proposals occurred during 2003-2005. Initial drilling funds were provided by the International Continental Scientific Drilling Program (ICDP) and the U.S. Geological Survey (USGS). Supplementary funds were provided by the National Aeronautics and Space Administration (NASA) Science Mission Directorate, ICDP, and USGS. Field operations were conducted at Eyreville Farm, Northampton County, Virginia, by Drilling, Observation, and Sampling of the Earth's Continental Crust (DOSECC) and the project staff during September-December 2005, resulting in two continuously cored, deep holes. The USGS and Rutgers University cored a shallow hole to 140 m in April-May 2006 to complete the recovered section from land surface to 1766 m depth. The recovered section consists of 1322 m of crater materials and 444 m of overlying postimpact Eocene to Pleistocene sediments. The crater section consists of, from base to top: basement-derived blocks of crystalline rocks (215 m); a section of suevite, impact melt rock, lithic impact breccia, and cataclasites (154 m); a thin interval of quartz sand and lithic blocks (26 m); a

  7. PENGGUNAAN KANBAN DALAM METODE JUST IN TIME PADA PRODUKSI

    Directory of Open Access Journals (Sweden)

    Hendra Achmadi

    2008-10-01

    Full Text Available Competition among textile companies is very heavy, especially when dealing with the WTC event in America. This caused a hard shock for the textile companies in Indonesia because many textile companies must divert their focus to local market. As we know, if most of textile companies divert their attention to domestic market, the next problem will happen is more companies entering to local or domestic market, so that more increasing the competition among textile companies. Competition occurs is price competition so that textile companies must continuously introspect themselves so they can compete, and the next is time. In an increasingly competitive world now caused it needs a new breakthrough, in time of samples creating and also textile production itself. The production amount resulted per day is large so that it must be absorbed by market. They can be marketed through a hypermarket or a traditional market. Therefore, the use of information technology is very useful for winning the competition among textile mill. Because the work of the textile industry also must obtain a new order that is done, it needs to make an existing production model of the new order (Just In Time; made to reduce the amount of stock that is stored, it will follow the Japanese style, which is called the Kanban system. In this system, the new company will produce if there is order.Keywords: kanban, textiles, just in time

  8. Deep-Time drilling in the Australian Archean: the Agouron Institute geobiological drilling project. (Invited)

    Science.gov (United States)

    Buick, R.

    2010-12-01

    The Agouron Institute has sponsored deep-time drilling across the South African Archean-Proterozoic boundary, investigating the rise of oxygen over an onshore-offshore environmental transect. It is now supporting a drilling program in the Australian Archean of the Pilbara Craton, addressing a similar theme but with the added goal of resolving controversy over the age and origin of hydrocarbon biomarker molecules in ancient kerogenous shales. As these have been claimed to provide evidence for the evolution of oxygenic photosynthesis long before the rise of atmospheric oxygen to persistently high levels during the ~2.3 Ga “Great Oxidation Event”, their syngenesis with their host shales is thus of critical importance for the interpretation of Earth’s early oxygenation history. During the first drilling season, 3 holes were drilled using techniques and equipment to minimize organic geochemical contamination (new drill-string components cleaned before drilling potentially biomarker-bearing rocks, pre-contamination of drilling fluid with a synthetic organic compound of similar geochemical characteristics to biomarkers, sterile cutting and storage of samples immediately upon retrieval from the core-barrel). The initial hole was a blank control for organic geochemistry, drilled into rocks too metamorphosed to retain biomarker molecules. These rocks, cherts, carbonates and pelites of the 3.52 Ga Coucal Formation, Coonterunah Group, have been metamorphosed to upper greenschist facies at temperatures near 500°C and so should have had any ancient soluble hydrocarbons destroyed. However, because they contain both carbonate and organic carbon, these rocks can instead provide isotopic information about the earliest evolution of biological metabolism as they possess residues of both the reactant and product sides of the carbon-fixation reaction. The second hole sampled an on-shore section of carbonates and kerogenous shales in the ~2.65 Ga Carawine Dolomite and Lewin Shale

  9. Propagation of Measurement-While-Drilling Mud Pulse during High Temperature Deep Well Drilling Operations

    Directory of Open Access Journals (Sweden)

    Hongtao Li

    2013-01-01

    Full Text Available Signal attenuates while Measurement-While-Drilling (MWD mud pulse is transmited in drill string during high temperature deep well drilling. In this work, an analytical model for the propagation of mud pulse was presented. The model consists of continuity, momentum, and state equations with analytical solutions based on the linear perturbation analysis. The model can predict the wave speed and attenuation coefficient of mud pulse. The calculated results were compared with the experimental data showing a good agreement. Effects of the angular frequency, static velocity, mud viscosity, and mud density behavior on speed and attenuation coefficients were included in this paper. Simulated results indicate that the effects of angular frequency, static velocity, and mud viscosity are important, and lower frequency, viscosity, and static velocity benefit the transmission of mud pulse. Influenced by density behavior, the speed and attenuation coefficients in drill string are seen to have different values with respect to well depth. For different circulation times, the profiles of speed and attenuation coefficients behave distinctly different especially in lower section. In general, the effects of variables above on speed are seen to be small in comparison.

  10. IMPLEMENTASI JUST IN TIME DALAM MENINGKATKATKAN PRODUKTIVITAS EFISIENSI BIAYA PRODUKSI

    Directory of Open Access Journals (Sweden)

    Luqman Hakim

    2016-02-01

    Full Text Available The purpose of Just In Time (JIT is to increase productivity and reduce production costs by eliminating dissipation that exist in the company through continuous improvement activities, and the purpose of this study was to determine the implementation of JIT in increasing productivity and cost efficiency of production in manufacturing companies. The research stages research are 1 identify problems 2 data used in this research are quantitative data and qualitative data, 3 the collection and processing of production and purchasing data, 4 the implementation of JIT system, 5 eliminate the dissipation and the available participation of employees, 6 reduce or eliminate defect products. The results of this research indicate that the implementation of JIT can improve company productivity and efficiency of the production costs.

  11. Just in Time as a Logistical Supply Concept

    Directory of Open Access Journals (Sweden)

    Gregor Veselko

    2006-07-01

    Full Text Available Recent developments have shown revolutionary progress inthe areas of information technology, logistical science andinternationalisation of business. These facts and the elementsinvolved strongly influence the methods of production and provisionof services thanks to an i"epressibly growing speed ofdata and information transfer and surmounting the culturaland geographical obstacles, which has given rise to new conceptsof business process optimisation in overcoming the distancein space and time. The result of that development weretwo concepts in the business world, the Just in Time (J!T conceptand its integral part "Quick Response': whose origins arein the Far East, in Japan, in the automotive industry. Thebreak-through of these concepts and their fast spreading toother spheres of the world economy can be attributed to theiroverwhelming efficiency. Both concepts aim to release the capitaltied in inventories, and to reduce them, avoiding thus anysurplus inventories.

  12. [Just-in-time initiation of optimal dialysis].

    Science.gov (United States)

    Cornelis, Tom; Kooman, Jeroen P; van der Sande, Frank M

    2010-01-01

    The IDEAL trial shows that the decision to start renal replacement treatment should not depend on GFR alone, but should be taken on the basis of clinical parameters. Quality of Life (QoL) questionnaires and bio-impedance analysis are potential tools for detecting subtle changes in the predialysis clinic. Too early an initiation of dialysis may be deleterious for the patient and the healthcare system. We are convinced that ESRD patients should be informed about intensive haemodialysis (HD), especially nocturnal (home) HD, as the best available dialysis modality. There is substantial evidence which shows that intensive HD improves clinical, biochemical and biological parameters, and may even prolong survival. We believe that 'just-in-time delivery of intensive haemodialysis' may result in optimised QoL and reduced economic burden.

  13. Design and Implementation of Java Just-in-Time Compiler

    Institute of Scientific and Technical Information of China (English)

    丁宇新; 梅嘉; 程虎

    2000-01-01

    Early Java implementations relied on interpretation, leading to poor performance compared to compiled programs. Java just-in-time (JIT) compiler can compile Java programs at runtime, so it not only improves Java's performance prominently, but also preserves Java's portability. In this paper the design and implementing techniques of Java JIT compiler based on Chinese open system are discussed in detail. To enhance the portability, a translating method which combines the static simulating method and macro expansion method is adopted. The optimization technique for JIT compiler is also discussed and a way to evaluate the hotspots in Java programs is presented. Experiments have been conducted to verify JIT compilation technique as an efficient way to accelerate Java.

  14. Just in time connectivity for large spiking networks

    Science.gov (United States)

    Lytton, William W.; Omurtag, Ahmet; Neymotin, Samuel A; Hines, Michael L

    2008-01-01

    The scale of large neuronal network simulations is memory-limited due to the need to store connectivity information: connectivity storage grows as the square of neuron number up to anatomically-relevant limits. Using the NEURON simulator as a discrete-event simulator (no integration), we explored the consequences of avoiding the space costs of connectivity through regenerating connectivity parameters when needed – just-in-time after a presynaptic cell fires. We explored various strategies for automated generation of one or more of the basic static connectivity parameters: delays, postsynaptic cell identities and weights, as well as run-time connectivity state: the event queue. Comparison of the JitCon implementation to NEURON’s standard NetCon connectivity method showed substantial space savings, with associated run-time penalty. Although JitCon saved space by eliminating connectivity parameters, larger simulations were still memory-limited due to growth of the synaptic event queue. We therefore designed a JitEvent algorithm that only added items to the queue when required: instead of alerting multiple postsynaptic cells, a spiking presynaptic cell posted a callback event at the shortest synaptic delay time. At the time of the callback, this same presynaptic cell directly notified the first postsynaptic cell and generated another self-callback for the next delay time. The JitEvent implementation yielded substantial additional time and space savings. We conclude that just-in-time strategies are necessary for very large network simulations but that a variety of alternative strategies should be considered whose optimality will depend on the characteristics of the simulation to be run. PMID:18533821

  15. Just in Time DSA the Hanford Nuclear Safety Basis Strategy

    Energy Technology Data Exchange (ETDEWEB)

    JACKSON, M.W.

    2002-06-01

    The U.S. Department of Energy, Richland Operations Office (RL) is responsible for 30 hazard category 2 and 3 nuclear facilities that are operated by its prime contractors, Fluor Hanford, Incorporated (FHI), Bechtel Hanford, Incorporated (BHI) and Pacific Northwest National Laboratory (PNNL). The publication of Title 10, Code of Federal Regulations, Part 830, Subpart B, Safely Basis Requirements (the Rule) in January 2001 requires that the Documented Safety Analyses (DSA) for these facilities be reviewed against the requirements of the Rule. Those DSAs that do not meet the requirements must either be upgraded to satisfy the Rule, or an exemption must be obtained. RL and its prime contractors have developed a Nuclear Safety Strategy that provides a comprehensive approach for supporting RL's efforts to meet its long-term objectives for hazard category 2 and 3 facilities while also meeting the requirements of the Rule. This approach will result in a reduction of the total number of safety basis documents that must be developed and maintained to support the remaining mission and closure of the Hanford Site and ensure that the documentation that must be developed will support: Compliance with the Rule; A ''Just-In-Time'' approach to development of Rule-compliant safety bases supported by temporary exemptions; and Consolidation of safety basis documents that support multiple facilities with a common mission (e.g. decontamination, decommissioning and demolition [DD&D], waste management, surveillance and maintenance). This strategy provides a clear path to transition the safety bases for the various Hanford facilities from support of operation and stabilization missions through DD&D to accelerate closure. This ''Just-In-Time'' Strategy can also be tailored for other DOE Sites, creating the potential for large cost savings and schedule reductions throughout the DOE complex.

  16. Science, VxOs and Just In Time Information

    Science.gov (United States)

    King, T. A.; Walker, R. J.; Merka, J.; Bentley, R. D.; Roberts, A.; Rankin, R.; Candey, R. M.; Narock, T. W.

    2009-12-01

    The scientific method is a system for acquiring knowledge based on the collection of data through observation, experimentation and the integration of previous knowledge. This is followed by the formulation and testing of hypotheses resulting in new knowledge and possibly the correction previous knowledge. From a system design perspective the scientific method is a well defined system, use cases are abundant, requirements are readily accessible and guiding principles are fully articulated. With advancement of technology new implementations emerge to support and enable science. We are now in the age of Virtual Observatories where distributed data are coupled through services and well-defined metadata. The paradigm is one in which information is sought and retrieved just in time for its use. We discuss a system model for a Just In Time Information (JITI) system that addresses the clearly identified needs of scientists. It includes tasks such as coordinate system conversion, file format transformation, subsetting, aggregation, and rendering. We also discuss the discovery needs of the scientist which range from the initial discovery of available resources to complex scientific queries. Overall the system is composed of a collection of small services which are tied together on a task-by-task basis, similar to that of a workflow, but with distributed and loosely coupled components. In a JITI system each service is invoked as needed with unique resource identifiers passed as the common reference thread that enables the service integration. The services that are part of a JITI system can be utilized in a number of ways to implement portals, search engines, aggregators, and mash-ups. JITI-like systems are emerging in the Virtual Observatory communities. We look at NASA's Virtual Magnetospheric Observatory, the Heliophysics Event List Manager (HELM), Europe's HELIO project and Canada's CSSDP project as examples.

  17. Drilling the Thuringian Syncline, Germany: core processing during the INFLUINS scientific deep drilling campaign

    Science.gov (United States)

    Abratis, Michael; Methe, Pascal; Aehnelt, Michaela; Kunkel, Cindy; Beyer, Daniel; Kukowski, Nina; Totsche, Kai Uwe

    2014-05-01

    Deep drilling of the central Thuringian Syncline was carried out in order to gather substantial knowledge of subsurface fluid dynamics and fluid rock interaction within a sedimentary basin. The final depth of the borehole was successfully reached at 1179 m, just a few meters above the Buntsandstein - Zechstein boundary. One of the aspects of the scientific drilling was obtaining sample material from different stratigraphic units for insights in genesis, rock properties and fluid-rock interactions. Parts of the section were cored whereas cuttings provide record of the remaining units. Coring was conducted in aquifers and their surrounding aquitards, i.e. parts of the Upper Muschelkalk (Trochitenkalk), the Middle Muschelkalk, the Upper Buntsandstein (Pelitrot and Salinarrot) and the Middle Buntsandstein. In advance and in cooperation with the GFZ Potsdam team "Scientific Drilling" core handling was discussed and a workflow was developed to ensure efficient and appropriate processing of the valuable core material and related data. Core curation including cleaning, fitting, marking, measuring, cutting, boxing, photographing and unrolled scanning using a DMT core scanner was carried out on the drilling site in Erfurt. Due care was exercised on samples for microbiological analyses. These delicate samples were immediately cut when leaving the core tube and stored within a cooling box at -78°C. Special software for data input was used developed by smartcube GmbH. Advantages of this drilling information system (DIS) are the compatibility with formats of international drilling projects from the IODP and ICDP drilling programs and thus options for exchanges with the international data bases. In a following step, the drill cores were brought to the national core repository of the BGR in Berlin Spandau where the cores were logged for their physical rock properties using a GeoTek multi sensor core logger (MSCL). After splitting the cores into a working and archive half, the

  18. The Effects of Guide Pads on Bore Diameter Enlargement Magnitude in Deep Hole Drilling

    Directory of Open Access Journals (Sweden)

    Zhang Huang

    2016-01-01

    Full Text Available Deep hole machining accuracy plays a crucial role in product’s quality. The results of an investigation into the machining accuracy of deep drilling holes which highlights problems of bore diameter enlargement magnitude assessment are presented in this paper. Through the study of BTA deep drilling tool properties and mechanism, as well as the formation rule of deep hole surface, clarified the burnishing mechanism of guide pad in deep hole drilling, and obtained the directly relationship between surface formation rule and the guide pad. After drilling experimentrevealed the effect of guide pad on bore diameter enlargement magnitude.

  19. The Iceland Deep Drilling Project (IDDP): (I) Drilling for Supercritical Hydrothermal Fluids is Underway

    Science.gov (United States)

    Elders, W. A.; Fridleifsson, G. O.; Bird, D. K.; Reed, M. H.; Schiffman, P.; Zierenberg, R.

    2008-12-01

    The IDDP is being carried out by an international industry-government consortium in Iceland (consisting of three leading Icelandic power companies, together with the National Energy Authority), Alcoa Inc. and StatoilHydro) with the objective of investigating the economic feasibility of producing electricity from supercritical geothermal fluids. This will require drilling to temperatures of 400-600°C and depths of 4 to 5 km. Modeling suggests that supercritical water could yield an order of magnitude greater power output than that produced by conventional geothermal wells. The consortium plans to test this concept in three different geothermal fields in Iceland. If successful, major improvements in the development of high-temperature geothermal resources could result worldwide. In June 2008 preparation of the first deep IDDP well commenced in the Krafla volcanic caldera in the active rift zone of NE Iceland. Selection of the first drill site for this well was based on geological, geophysical and geochemical data, and on the results of extensive geothermal drilling since 1971. During 1975-1984, a rifting episode occurred in the caldera, involving 9 volcanic eruptions. In parts of the geothermal field acid volcanic gases made steam from some of the existing wells unsuitable for power generation for the following decade. A large magma chamber at 3-7 km depth was detected by S-wave attenuation beneath the center of the caldera, believed to be the heat source of the geothermal system. A recent MT-survey has confirmed the existence of low resistivity bodies at shallow depths within the volcano. The IDDP well will be drilled and cased to 800m depth in September, before the winter snows, and in spring 2009 it will be drilled and cased to 3.5km depth and then deepened to 4.5 km in July. Several spot cores for scientific studies will be collected between 2400m and the total depth. After the well heats, it will be flow tested and, if successful, a pilot plant for power

  20. Deep Drilling Basic Research: Volume 5 - System Evaluations. Final Report, November 1988--August 1990

    Energy Technology Data Exchange (ETDEWEB)

    None

    1990-06-01

    This project is aimed at decreasing the costs and increasing the efficiency of drilling gas wells in excess of 15,000 feet. This volume presents a summary of an evaluation of various drilling techniques. Drilling solutions were compared quantitatively against typical penetration rates derived from conventional systems. A qualitative analysis measured the impact of a proposed system on the drilling industry. The evaluations determined that the best candidates f o r improving the speed and efficiency of drilling deep gas wells include: PDC/TSD bits, slim-hole drilling, roller-cone bits, downhole motors, top-driven systems, and coiled-tubing drilling.

  1. Los sistemas just-in-time/Kanban, un paradigma productivo

    Directory of Open Access Journals (Sweden)

    Huberto Juárez Núñez

    2002-01-01

    Full Text Available Los sistemas just-in-time/Kanban surgen en el contexto de la reconstrucción de la economíajaponesa hacia mediados del siglo XX. Fueron las empresas automotrices (especialmente Toyotalas que lograron hacer un análisis crítico de las debilidades y fortalezas del sistema fordista, y enese camino encontraron rutas alternativas que mostraron su importancia cuando en el proceso desu internacionalización dieron respuesta a problemas sistémicos del capitalismo. Su impacto en lasestructuras productivas ha sido enorme. Por una parte, han impulsado nuevas formas de integra-ción industrial (lean production, modular production y, por la otra, han cambiado radicalmen-te la cultura empresarial y laboral frente a conceptos como productividad y calidad. En este trabajose hace un reconocimiento del desarrollo de los sistemas, sus procesos de internacionalización y losimpactos recientes en las transformaciones de la industria del automóvil.

  2. Just In-Time Maintenance of Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    DR. Alexander G. Parlos

    2002-01-22

    The goal of this project has been to develop and demonstrate the feasibility of a new technology for maintenance engineering: a Just-In-Time Maintenance (JITM) system for rotating machines. The JITM system is based on several key developments at Texas A and M over the past ten years in emerging intelligent information technologies, which if integrated into a single system could provide a revolutionary approach in the way maintenance is performed. Rotating machines, such as induction motors, range from a few horse power (hp) to several thousand hp in size, and they are widely used in nuclear power plants and in other industries. Forced outages caused by induction motor failures are the reason for as much as 15% - 40% of production costs to be attributable to maintenance, whereas plant shutdowns caused by induction motor failures result in daily financial losses to the utility and process industries of $1 M or more. The basic components of the JITM system are the available machine sensors, that is electric current sensors and accelerometers, and the computational algorithms used in the analysis and interpretation of the occurring incipient failures. The JITM system can reduce the costs attributable to maintenance by about 40% and it can lower the maintenance budgets of power and process plants by about 35%, while requiring no additional sensor installation. As a result, the JITM system can improve the competitiveness of US nuclear utilities at minimal additional cost.

  3. Teaching undergraduate biomechanics with Just-in-Time Teaching.

    Science.gov (United States)

    Riskowski, Jody L

    2015-06-01

    Biomechanics education is a vital component of kinesiology, sports medicine, and physical education, as well as for many biomedical engineering and bioengineering undergraduate programmes. Little research exists regarding effective teaching strategies for biomechanics. However, prior work suggests that student learning in undergraduate physics courses has been aided by using the Just-in-Time Teaching (JiTT). As physics understanding plays a role in biomechanics understanding, the purpose of study was to evaluate the use of a JiTT framework in an undergraduate biomechanics course. This two-year action-based research study evaluated three JiTT frameworks: (1) no JiTT; (2) mathematics-based JiTT; and (3) concept-based JiTT. A pre- and post-course assessment of student learning used the biomechanics concept inventory and a biomechanics concept map. A general linear model assessed differences between the course assessments by JiTT framework in order to evaluate learning and teaching effectiveness. The results indicated significantly higher learning gains and better conceptual understanding in a concept-based JiTT course, relative to a mathematics-based JiTT or no JiTT course structure. These results suggest that a course structure involving concept-based questions using a JiTT strategy may be an effective method for engaging undergraduate students and promoting learning in biomechanics courses.

  4. A practical application of just-in-time.

    Science.gov (United States)

    Wormsley, J M

    1986-10-01

    During the 1950s, the Japanese recognized that they would have to upgrade their manufacturing operations significantly if they were going to make inroads into world markets. One of the targets they set for themselves was to eliminate waste, particularly, excess inventory. The Toyota Company originated a concept called kanban hoshiki, which, when translated, means "card system". The name refers to the use of tags (cards) to track the flow of work-in-progress inventory. On this side of the Pacific, the kanban hoshiki inventory management system has been renamed Just-in-Time. The basic premise of JIT is that inventory is an evil presence that drains company cash flow, contributes to wast and misuse of company assets, takes up valuable space, and undermines company profitability. The principal goal of JIT, then, is to get as close to zero inventory as possible. JIT has been applied with success in large manufacturing industries and recently has found a home in small business as well. A growing number of hospitals are also experimenting with the JIT concept, sometimes under the name of stockless purchasing.

  5. Just in Time in Space or Space Based JIT

    Science.gov (United States)

    VanOrsdel, Kathleen G.

    1995-01-01

    Our satellite systems are mega-buck items. In today's cost conscious world, we need to reduce the overall costs of satellites if our space program is to survive. One way to accomplish this would be through on-orbit maintenance of parts on the orbiting craft. In order to accomplish maintenance at a low cost I advance the hypothesis of having parts and pieces (spares) waiting. Waiting in the sense of having something when you need it, or just-in-time. The JIT concept can actually be applied to space processes. Its definition has to be changed just enough to encompass the needs of space. Our space engineers tell us which parts and pieces the satellite systems might be needing once in orbit. These items are stored in space for the time of need and can be ready when they are needed -- or Space Based JIT. When a system has a problem, the repair facility is near by and through human or robotics intervention, it can be brought back into service. Through a JIT process, overall system costs could be reduced as standardization of parts is built into satellite systems to facilitate reduced numbers of parts being stored. Launch costs will be contained as fewer spare pieces need to be included in the launch vehicle and the space program will continue to thrive even in this era of reduced budgets. The concept of using an orbiting parts servicer and human or robotics maintenance/repair capabilities would extend satellite life-cycle and reduce system replacement launches. Reductions of this nature throughout the satellite program result in cost savings.

  6. Hydrologic testing during drilling: application of the flowing fluid electrical conductivity (FFEC) logging method to drilling of a deep borehole

    Science.gov (United States)

    Tsang, Chin-Fu; Rosberg, Jan-Erik; Sharma, Prabhakar; Berthet, Theo; Juhlin, Christopher; Niemi, Auli

    2016-09-01

    Drilling of a deep borehole does not normally allow for hydrologic testing during the drilling period. It is only done when drilling experiences a large loss (or high return) of drilling fluid due to penetration of a large-transmissivity zone. The paper proposes the possibility of conducting flowing fluid electrical conductivity (FFEC) logging during the drilling period, with negligible impact on the drilling schedule, yet providing important information on depth locations of both high- and low-transmissivity zones and their hydraulic properties. The information can be used to guide downhole fluid sampling and post-drilling detailed testing of the borehole. The method has been applied to the drilling of a 2,500-m borehole at Åre, central Sweden, firstly when the drilling reached 1,600 m, and then when the drilling reached the target depth of 2,500 m. Results unveil eight hydraulically active zones from 300 m down to borehole bottom, with depths determined to within the order of a meter. Further, the first set of data allows the estimation of hydraulic transmissivity values of the six hydraulically conductive zones found from 300 to 1,600 m, which are very low and range over one order of magnitude.

  7. Deep Fault Drilling Project—Alpine Fault, New Zealand

    Directory of Open Access Journals (Sweden)

    Rupert Sutherland

    2009-09-01

    Full Text Available The Alpine Fault, South Island, New Zealand, constitutes a globally significant natural laboratory for research into how active plate-bounding continental faults work and, in particular, how rocks exposed at the surface today relate to deep-seated processes of tectonic deformation, seismogenesis, and mineralization. The along-strike homogeneity of the hanging wall, rapid rate of dextral-reverse slip on an inclined fault plane, and relatively shallow depths to mechanical and chemical transitions make the Alpine Fault and the broader South Island plate boundary an important international site for multi-disciplinary research and a realistic target for an ambitious long-term program of scientific drilling investigations.

  8. EM Telemetry Tool for Deep Well Drilling Applications

    Energy Technology Data Exchange (ETDEWEB)

    Jeffrey M. Gabelmann

    2005-11-15

    This final report discusses the successful development and testing of a deep operational electromagnetic (EM) telemetry system, produced under a cooperative agreement with the United States Department of Energy's National Energy Technology Laboratory. This new electromagnetic telemetry system provides a wireless communication link between sensors deployed deep within oil and gas wells and data acquisition equipment located on the earth's surface. EM based wireless telemetry is a highly appropriate technology for oil and gas exploration in that it avoids the need for thousands of feet of wired connections. In order to achieve the project performance objectives, significant improvements over existing EM telemetry systems were made. These improvements included the development of new technologies that have improved the reliability of the communications link while extending operational depth. A key element of the new design is the incorporation of a data-fusion methodology which enhances the communication receiver's ability to extract very weak signals from large amounts of ambient environmental noise. This innovative data-fusion receiver based system adapts advanced technologies, not normally associated with low-frequency communications, and makes them work within the harsh drilling environments associated with the energy exploration market. Every element of a traditional EM telemetry system design, from power efficiency to reliability, has been addressed. The data fusion based EM telemetry system developed during this project is anticipated to provide an EM tool capability that will impact both onshore and offshore oil and gas exploration operations, for conventional and underbalanced drilling applications.

  9. Polymer Drilling Fluid with Micron-Grade Cenosphere for Deep Coal Seam

    Directory of Open Access Journals (Sweden)

    Peng Xu

    2015-01-01

    Full Text Available Traditional shallow coal seam uses clean water, solid-free system, and foam system as drilling fluid, while they are not suitable for deep coal seam drilling due to mismatching density, insufficient bearing capacity, and poor reservoir protection effect. According to the existing problems of drilling fluid, micron-grade cenosphere with high bearing capacity and ultralow true density is selected as density regulator; it, together with polymer “XC + CMC” and some other auxiliary agents, is jointly used to build micron-grade polymer drilling fluid with cenosphere which is suitable for deep coal seam. Basic performance test shows that the drilling fluid has good rheological property, low filtration loss, good density adjustability, shear thinning, and thixotropy; besides, drilling fluid flow is in line with the power law rheological model. Compared with traditional drilling fluid, dispersion stability basically does not change within 26 h; settlement stability evaluated with two methods only shows a small amount of change; permeability recovery rate evaluated with Qinshui Basin deep coal seam core exceeds 80%. Polymer drilling fluid with cenosphere provides a new thought to solve the problem of drilling fluid density and pressure for deep coal seam drilling and also effectively improves the performance of reservoir protection ability.

  10. Statistical Analysis of Deep Drilling Process Conditions Using Vibrations and Force Signals

    Directory of Open Access Journals (Sweden)

    Syafiq Hazwan

    2016-01-01

    Full Text Available Cooling systems is a key point for hot forming process of Ultra High Strength Steels (UHSS. Normally, cooling systems is made using deep drilling technique. Although deep twist drill is better than other drilling techniques in term of higher productivity however its main problem is premature tool breakage, which affects the production quality. In this paper, analysis of deep twist drill process parameters such as cutting speed, feed rate and depth of cut by using statistical analysis to identify the tool condition is presented. The comparisons between different two tool geometries are also studied. Measured data from vibrations and force sensors are being analyzed through several statistical parameters such as root mean square (RMS, mean, kurtosis, standard deviation and skewness. Result found that kurtosis and skewness value are the most appropriate parameters to represent the deep twist drill tool conditions behaviors from vibrations and forces data. The condition of the deep twist drill process been classified according to good, blunt and fracture. It also found that the different tool geometry parameters affect the performance of the tool drill. It believe the results of this study are useful in determining the suitable analysis method to be used for developing online tool condition monitoring system to identify the tertiary tool life stage and helps to avoid mature of tool fracture during drilling process.

  11. OS EFEITOS DO JUST-IN-TIME SOBRE O DESEMPENHO FINANCEIRO DAS EMPRESAS

    Directory of Open Access Journals (Sweden)

    Danilo Lacerda Borges

    2012-08-01

    Full Text Available Many processes have been developed with the objective of reducing business costs and increasing the efficiency of these on the market, standing out the Just-in-Time because it’s widely publicized and known. This article aimed to identify with effects the implementation of just-in-time brings about the financial performance of companies. For this we sought along the main national and international literature which impact on performance was found in the practice of just-in-time companies. It was found that the just-in-time is positively related to corporate performance. It was also found that firm size, time of use of just-in-time and their relationships affect this system. We conclude that this research is an important support for students and researchers develop future empirical research by raising and bringing together diverse opinions about the relationship between just-in-time and the financial performance.

  12. Smaller Footprint Drilling System for Deep and Hard Rock Environments; Feasibility of Ultra-High-Speed Diamond Drilling

    Energy Technology Data Exchange (ETDEWEB)

    TerraTek, A Schlumberger Company

    2008-12-31

    The two phase program addresses long-term developments in deep well and hard rock drilling. TerraTek believes that significant improvements in drilling deep hard rock will be obtained by applying ultra-high rotational speeds (greater than 10,000 rpm). The work includes a feasibility of concept research effort aimed at development that will ultimately result in the ability to reliably drill 'faster and deeper' possibly with smaller, more mobile rigs. The principle focus is on demonstration testing of diamond bits rotating at speeds in excess of 10,000 rpm to achieve high rate of penetration (ROP) rock cutting with substantially lower inputs of energy and loads. The significance of the 'ultra-high rotary speed drilling system' is the ability to drill into rock at very low weights on bit and possibly lower energy levels. The drilling and coring industry today does not practice this technology. The highest rotary speed systems in oil field and mining drilling and coring today run less than 10,000 rpm - usually well below 5,000 rpm. This document provides the progress through two phases of the program entitled 'Smaller Footprint Drilling System for Deep and Hard Rock Environments: Feasibility of Ultra-High-Speed Diamond Drilling' for the period starting 30 June 2003 and concluding 31 March 2009. The accomplishments of Phases 1 and 2 are summarized as follows: (1) TerraTek reviewed applicable literature and documentation and convened a project kick-off meeting with Industry Advisors in attendance (see Black and Judzis); (2) TerraTek designed and planned Phase I bench scale experiments (See Black and Judzis). Improvements were made to the loading mechanism and the rotational speed monitoring instrumentation. New drill bit designs were developed to provided a more consistent product with consistent performance. A test matrix for the final core bit testing program was completed; (3) TerraTek concluded small-scale cutting performance tests; (4

  13. Reaching 1 m deep on Mars: the Icebreaker drill.

    Science.gov (United States)

    Zacny, K; Paulsen, G; McKay, C P; Glass, B; Davé, A; Davila, A F; Marinova, M; Mellerowicz, B; Heldmann, J; Stoker, C; Cabrol, N; Hedlund, M; Craft, J

    2013-12-01

    The future exploration of Mars will require access to the subsurface, along with acquisition of samples for scientific analysis and ground-truthing of water ice and mineral reserves for in situ resource utilization. The Icebreaker drill is an integral part of the Icebreaker mission concept to search for life in ice-rich regions on Mars. Since the mission targets Mars Special Regions as defined by the Committee on Space Research (COSPAR), the drill has to meet the appropriate cleanliness standards as requested by NASA's Planetary Protection Office. In addition, the Icebreaker mission carries life-detection instruments; and in turn, the drill and sample delivery system have to meet stringent contamination requirements to prevent false positives. This paper reports on the development and testing of the Icebreaker drill, a 1 m class rotary-percussive drill and triple redundant sample delivery system. The drill acquires subsurface samples in short, approximately 10 cm bites, which makes the sampling system robust and prevents thawing and phase changes in the target materials. Autonomous drilling, sample acquisition, and sample transfer have been successfully demonstrated in Mars analog environments in the Arctic and the Antarctic Dry Valleys, as well as in a Mars environmental chamber. In all environments, the drill has been shown to perform at the "1-1-100-100" level; that is, it drilled to 1 m depth in approximately 1 hour with less than 100 N weight on bit and approximately 100 W of power. The drilled substrate varied and included pure ice, ice-rich regolith with and without rocks and with and without 2% perchlorate, and whole rocks. The drill is currently at a Technology Readiness Level (TRL) of 5. The next-generation Icebreaker drill weighs 10 kg, which is representative of the flightlike model at TRL 5/6.

  14. Clean subglacial access: prospects for future deep hot-water drilling.

    Science.gov (United States)

    Makinson, Keith; Pearce, David; Hodgson, Dominic A; Bentley, Michael J; Smith, Andrew M; Tranter, Martyn; Rose, Mike; Ross, Neil; Mowlem, Matt; Parnell, John; Siegert, Martin J

    2016-01-28

    Accessing and sampling subglacial environments deep beneath the Antarctic Ice Sheet presents several challenges to existing drilling technologies. With over half of the ice sheet believed to be resting on a wet bed, drilling down to this environment must conform to international agreements on environmental stewardship and protection, making clean hot-water drilling the most viable option. Such a drill, and its water recovery system, must be capable of accessing significantly greater ice depths than previous hot-water drills, and remain fully operational after connecting with the basal hydrological system. The Subglacial Lake Ellsworth (SLE) project developed a comprehensive plan for deep (greater than 3000 m) subglacial lake research, involving the design and development of a clean deep-ice hot-water drill. However, during fieldwork in December 2012 drilling was halted after a succession of equipment issues culminated in a failure to link with a subsurface cavity and abandonment of the access holes. The lessons learned from this experience are presented here. Combining knowledge gained from these lessons with experience from other hot-water drilling programmes, and recent field testing, we describe the most viable technical options and operational procedures for future clean entry into SLE and other deep subglacial access targets.

  15. SMALLER FOOTPRINT DRILLING SYSTEM FOR DEEP AND HARD ROCK ENVIRONMENTS; FEASIBILITY OF ULTRA-HIGH SPEED DIAMOND DRILLING

    Energy Technology Data Exchange (ETDEWEB)

    Alan Black; Arnis Judzis

    2004-10-01

    The two phase program addresses long-term developments in deep well and hard rock drilling. TerraTek believes that significant improvements in drilling deep hard rock will be obtained by applying ultra-high (greater than 10,000 rpm) rotational speeds. The work includes a feasibility of concept research effort aimed at development and test results that will ultimately result in the ability to reliably drill ''faster and deeper'' possibly with rigs having a smaller footprint to be more mobile. The principle focus is on demonstration testing of diamond bits rotating at speeds in excess of 10,000 rpm to achieve high rate of penetration rock cutting with substantially lower inputs of energy and loads. The project draws on TerraTek results submitted to NASA's ''Drilling on Mars'' program. The objective of that program was to demonstrate miniaturization of a robust and mobile drilling system that expends small amounts of energy. TerraTek successfully tested ultrahigh speed ({approx}40,000 rpm) small kerf diamond coring. Adaptation to the oilfield will require innovative bit designs for full hole drilling or continuous coring and the eventual development of downhole ultra-high speed drives. For domestic operations involving hard rock and deep oil and gas plays, improvements in penetration rates is an opportunity to reduce well costs and make viable certain field developments. An estimate of North American hard rock drilling costs is in excess of $1,200 MM. Thus potential savings of $200 MM to $600 MM are possible if drilling rates are doubled [assuming bit life is reasonable]. The net result for operators is improved profit margin as well as an improved position on reserves. The significance of the ''ultra-high rotary speed drilling system'' is the ability to drill into rock at very low weights on bit and possibly lower energy levels. The drilling and coring industry today does not practice this technology

  16. SMALLER FOOTPRINT DRILLING SYSTEM FOR DEEP AND HARD ROCK ENVIRONMENTS; FEASIBILITY OF ULTRA-HIGH SPEED DIAMOND DRILLING

    Energy Technology Data Exchange (ETDEWEB)

    Alan Black; Arnis Judzis

    2004-10-01

    The two phase program addresses long-term developments in deep well and hard rock drilling. TerraTek believes that significant improvements in drilling deep hard rock will be obtained by applying ultra-high (greater than 10,000 rpm) rotational speeds. The work includes a feasibility of concept research effort aimed at development and test results that will ultimately result in the ability to reliably drill ''faster and deeper'' possibly with rigs having a smaller footprint to be more mobile. The principle focus is on demonstration testing of diamond bits rotating at speeds in excess of 10,000 rpm to achieve high rate of penetration rock cutting with substantially lower inputs of energy and loads. The project draws on TerraTek results submitted to NASA's ''Drilling on Mars'' program. The objective of that program was to demonstrate miniaturization of a robust and mobile drilling system that expends small amounts of energy. TerraTek successfully tested ultrahigh speed ({approx}40,000 rpm) small kerf diamond coring. Adaptation to the oilfield will require innovative bit designs for full hole drilling or continuous coring and the eventual development of downhole ultra-high speed drives. For domestic operations involving hard rock and deep oil and gas plays, improvements in penetration rates is an opportunity to reduce well costs and make viable certain field developments. An estimate of North American hard rock drilling costs is in excess of $1,200 MM. Thus potential savings of $200 MM to $600 MM are possible if drilling rates are doubled [assuming bit life is reasonable]. The net result for operators is improved profit margin as well as an improved position on reserves. The significance of the ''ultra-high rotary speed drilling system'' is the ability to drill into rock at very low weights on bit and possibly lower energy levels. The drilling and coring industry today does not practice this technology

  17. Transforming a Business Statistics Course with Just-in-Time Teaching

    Science.gov (United States)

    Bangs, Joann

    2012-01-01

    This paper describes changing the way a business statistics course is taught through the use of just-in-time teaching methods. Implementing this method allowed for more time in the class to be spent focused on problem solving, resulting in students being able to handle more difficult problems. Students' perceptions of the just-in-time assignments…

  18. The School Librarian as Program Administrator: Just-in-Time Librarianship

    Science.gov (United States)

    Yates, Steven D.

    2011-01-01

    By applying just-in-time philosophy to today's school libraries, librarians can fulfill the role of program administrator by continuing to provide the resources students and faculty deserve, exactly at their individual points of need. Just-in-time librarianship is a mindset that could prove unsettling for some school librarians. The main facets of…

  19. The objectives for deep scientific drilling in Yellowstone National Park

    Energy Technology Data Exchange (ETDEWEB)

    1987-01-01

    The western area of the United Stated contains three young silicic calderas, all of which contain attractive targets for scientific drilling. Of the three, the Yellowstone caldera complex is the largest, has the most intense geothermal anomalies, and is the most seismically active. On the basis of scientific objectives alone. it is easily the first choice for investigating active hydrothermal processes. This report briefly reviews what is known about the geology of Yellowstone National Park and highlights unique information that could be acquired by research drilling only in Yellowstone. However, it is not the purpose of this report to recommend specific drill sites or to put forth a specific drilling proposal. 175 refs., 9 figs., 2 tabs.

  20. 30 CFR 203.40 - Which leases are eligible for royalty relief as a result of drilling a deep well or a phase 1...

    Science.gov (United States)

    2010-07-01

    ... REDUCTION IN ROYALTY RATES OCS Oil, Gas, and Sulfur General Royalty Relief for Drilling Deep Gas Wells on... a result of drilling a deep well or a phase 1 ultra-deep well? 203.40 Section 203.40 Mineral... a result of drilling a deep well or a phase 1 ultra-deep well? Your lease may receive an RSV...

  1. Just-in-time, Schematic Supportive Information Presentation During Cognitive Skill Acquisition.

    OpenAIRE

    Kester, Liesbeth; Lehnen, Chris; Van Gerven, Pascal; Kirschner, Paul A.

    2008-01-01

    Kester, L., Lehnen, C., Van Gerven, P.W. M., & Kirschner, P. A. (2006). Just-in-time, Schematic Supportive Information Presentation During Cognitive Skill Acquisition. Computers in Human Behavior, 22, 93-112 .

  2. Just-in-time information presentation and the acquisition of complex cognitive skills

    NARCIS (Netherlands)

    Kester, Liesbeth; Kirschner, Paul A.; Van Merriënboer, Jeroen; Bäumer, Anita

    2008-01-01

    Kester, L., Kirschner, P., van Merriënboer, J. J. G., & Bäumer, A. (2001). Just-in-time information presentation and the acquisition of complex cognitive skills. Computers in Human Behavior, 17, 373-391.

  3. Research and development of improved cavitating jets for deep-hole drilling

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, V.E. Jr.; Lindenmuth, W.T.; Chahine, G.L.; Conn, A.F.; Frederick, G.S.

    1984-01-01

    Improved cavitating nozzles have been developed as part of an on-going program to increase the rate of penetration of deep-hole drill bits. Based on the four criteria of: incipient cavitation number, amplitude of pressure fluctuation (and hence enhanced structuring of the jet flow), rock cutting, and cleaning chips from the hole bottom - these new, STRATOJET (STRuctured Acoustically Tuned Oscillating JET) cavitating nozzle systems have out-performed both conventional drill bit nozzles and the basic CAVIJET cavitating jets. Although nozzle designs which provide large amplitude pressure modulations are now available for the operation in water, additional research is needed to optimize self-resonating jets for use: (a) in mud, (b) in specific drill bit designs, and (c) at higher system pressures than now currently used for deep-hole drilling.

  4. The Effect And Implementation Of Just in time System From A Cost And Management Accounting Perspective

    OpenAIRE

    DALCI, Dr. İlhan; TANIŞ, Associate Prof. Dr. Veyis Naci

    2013-01-01

    In today’s highly competitive work environment companies have to find ways to be able to compete effectively with their competitors They have to find ways to reduce cost improve quality and increase customer satisfaction Just In Time production system is among the tools that companies can use to become competitive The implementation of Just In Time manufacturing system will provide companies with competitive advantage; however the system requires companies to change radically Cost acco...

  5. China's First Extra-deep Horizontal Well Drilled in Tarim

    Institute of Scientific and Technical Information of China (English)

    1997-01-01

    @@ A high-yield commercial oil/gas flow with daily output of 168 cum of crude oil and 1.08 million cum of natural gas was obtained from Tarim exploration region on May 4, 1997 after its secondary test in Well Jiefang 128. This well is highly difficult to be drilled in the world.

  6. Rotary Percussive Auto-Gopher for Deep Drilling and Sampling

    Science.gov (United States)

    Bar-Cohen, Yoseph; Badescu, Mircea; Sherrit, Stewart

    2009-01-01

    The term "rotary percussive auto-gopher" denotes a proposed addition to a family of apparatuses, based on ultrasonic/ sonic drill corers (USDCs), that have been described in numerous previous NASA Tech Briefs articles. These apparatuses have been designed, variously, for boring into, and/or acquiring samples of, rock or other hard, brittle materials of geological interest. In the case of the rotary percussive autogopher, the emphasis would be on developing an apparatus capable of penetrating to, and acquiring samples at, depths that could otherwise be reached only by use of much longer, heavier, conventional drilling-and-sampling apparatuses. To recapitulate from the prior articles about USDCs: A USDC can be characterized as a lightweight, low-power jackhammer in which a piezoelectrically driven actuator generates ultrasonic vibrations and is coupled to a tool bit through a free mass. The bouncing of the free mass between the actuator horn and the drill bit converts the actuator ultrasonic vibrations into sonic hammering of the drill bit. The combination of ultrasonic and sonic vibrations gives rise to a hammering action (and a resulting chiseling action at the tip of the tool bit) that is more effective for drilling than is the microhammering action of ultrasonic vibrations alone. The hammering and chiseling actions are so effective that the size of the axial force needed to make the tool bit advance into soil, rock, or another material of interest is much smaller than in ordinary rotary drilling, ordinary hammering, or ordinary steady pushing. The predecessor of the rotary percussive auto-gopher is an apparatus, now denoted an ultrasonic/sonic gopher and previously denoted an ultrasonic gopher, described in "Ultrasonic/ Sonic Mechanism for Drilling and Coring" (NPO-30291), NASA Tech Briefs Vol. 27, No. 9 (September 2003), page 65. The ultrasonic/sonic gopher is intended for use mainly in acquiring cores. The name of the apparatus reflects the fact that, like a

  7. Determining Scientific Projects for the Deep-Sea Drilling Vessel Chikyu

    Science.gov (United States)

    Coffin, Millard F.; Given, Holly K.; Eguchi, Nobuhisa

    2013-07-01

    An international, multidisciplinary community workshop convened to define scientific projects for the next decade of scientific ocean drilling utilizing unique capabilities afforded by the drilling vessel Chikyu ("Earth" in Japanese). The meeting, attended by 397 participants from 21 countries, featured 10 keynote lectures. Participants in working groups identified important projects that are fundamental to understanding the Earth system and that require deep penetration of the seafloor.

  8. Iron-rich basal sediments from the eastern equatorial pacific: Leg 16, deep sea drilling project

    Science.gov (United States)

    Cronan, D.S.; Van Andel, T. H.; Ross, Heath G.; Dinkelman, M.G.; Bennett, R.H.; Bukry, D.; Charleston, S.; Kaneps, A.; Rodolfo, K.S.; Yeats, R.S.

    1972-01-01

    Iron-rich sediments chemically similar to those forming at present on the crest of the East Pacific Rise have been found just above basement at widely separated drill sites in the eastern equatorial Pacific, including three sites of Leg 16 of the Deep Sea Drilling Project. These sediments were probably formed when the basement was at the crest of this rise and have moved to their present location as a result of sea-floor spreading.

  9. Microbiological Profiles of Deep Terrestrial Sedimentary Rocks Revealed by an Aseptic Drilling Procedure

    Science.gov (United States)

    Suzuki, Y.; Suko, T.; Fukuda, A.; Kouduka, M.; Nanba, K.; Sakata, S.; Ito, K.

    2009-12-01

    Unlike the near-surface environments, it is difficult to determine the community structure and biogeochemical functions of microorganisms in the deep subsurface mainly due to accessibility without contamination and disturbance. In an inland fore-arc basin in central Japan, we applied a new drilling procedure using deoxygenated and/or filter-sterilized drilling fluid(s). Although DNA-stained and cultivable cell numbers and the contents of phospholipid fatty acids (PLFA) all indicated the presence of metabolically active microbial populations in sedimentary rocks at a depth range from 200 to 350 m, it was not successful to extract DNA from the drilled core samples. During drilling, drilling fluid used for drilling and coring in the borehole was collected from the borehole bottom and subjected to DNA extraction. Quantitative fluorogenic PCR revealed that bacterial DNA were detected in drilling fluid samples when drilling was performed for siltstone and silty sandstone layers with the limited flow of drilling fluid. Bacterial 16S rRNA gene sequences retrieved from the drilling fluid samples below a depth of 324 m were mostly related to Pseudomonas putida or Flavobacterium succinicans, while those related to other Pseudomonas spp. were predominant at depths of 298 and 299m. PLFA profiles of core samples from a depth range between 250 and 351 m showed the abundance of 16:0, 16:1ω7 and 18:1ω9 fatty acids, which are known as major cellular lipid components of Pseudomonas and Flavobacterium spp. From these results, it was suggested that the members of the genera Pseudomonas and F. succinicans might represent dominant microbial populations that inhabit the deep terrestrial sedimentary rocks in Central Japan. This study was supported by grants from the Nuclear and Industrial Safety Agency (NISA) and Japan Nuclear Energy Safety Organization (JNES).

  10. Foam used to drill, gravel-pack deep gas well

    Energy Technology Data Exchange (ETDEWEB)

    Dupont, J.

    1984-05-07

    Surface-generated or preformed stable foam recently has been used as the circulating medium to drill-in and gravel-pack open hole completions along the Gulf Coast. With minor modifications to conventional tools and procedures, preformed stable foam is a viable alternative to current practices in completing underpressured reservoirs. Postproduction results indicate this is a cost-effective and reliable completion method.

  11. CONDITION MONITOR OF DEEP-HOLE DRILLING BASED ON MULTI-SENSOR INFORMATION FUSION

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    A condition monitoring method of deep-hole drilling based on multi-sensor information fusion is discussed. The signal of vibration and cutting force are collected when the condition of deep-hole drilling on stainless steel 0Crl7Ni4Cu4Nb is normal or abnormal. Four eigenvectors are extracted on time-domain and frequency-domain analysis of the signals. Then the four eigenvectors are combined and sent to neural networks to dispose. The fusion results indicate that multi-sensor information fusion is superior to single-sensor information, and that cutting force signal can reflect the condition of cutting tool better than vibration signal.

  12. Deep Drilling with the ANDRILL Program in Antarctica

    Directory of Open Access Journals (Sweden)

    Alex Pyne

    2006-09-01

    Full Text Available ANDRILL (ANtarctic geological DRILLing is a new international, multi-disciplinary drilling program that targets geological records that lie hidden beneath the icy blanket of Antarctica. The primary objective is to investigate Antarctica’s role in global environmental change over the past sixty-fi ve million years, at various scales of age resolution, and thereby enhance our understanding of Antarctica’s potential response to future global changes. Efforts to understand the infl uence of Antarctica on global climate change require a fundamental knowledge of how the Antarctic cryosphere (ice sheets, ice shelves, and sea ice has evolved, not only in recent times but also during earlier geological periods when global temperature and atmospheric CO2 levels were similar to what might be reached by the end of this century. ANDRILL’s integrated science approach willuse stratigraphic drilling, coring, and multi-proxy core analysis combined with geophysical surveys and numerical modeling to study the Cenozoic history of Antarctic climate and ice sheets, the evolution of polar biota, Antarctic tectonism, and Antarctica’s role in the evolution of Earth’s ocean–climate system.

  13. OS EFEITOS DO JUST-IN-TIME SOBRE O DESEMPENHO FINANCEIRO DAS EMPRESAS

    Directory of Open Access Journals (Sweden)

    Danilo Lacerda Borges

    2012-08-01

    Full Text Available Muitos processos têm sido desenvolvidos tendo como objetivo a diminuição dos custos das empresas e o aumento da eficiência no mercado, se destacando o Just-in-Time por ser o sistema de produção mais amplamente divulgado e conhecido na atualidade. Desta forma, o presente artigo visa identificar quais os efeitos que a implantação do sistema just-in-time traz sobre o desempenho financeiro das empresas. Para tal buscou-se junto as principais literaturas nacionais e internacionais compreender qual o impacto desse sistema no desempenho, constatando-se que o just-in-time está positivamente relacionado o este indicador. Verificou-se também que o tamanho da empresa, o tempo de utilização do just-in-time e suas relações interferem na relação supracitada. Conclui-se que esse trabalho fornece suporte importante para alunos e pesquisadores desenvolverem futuras pesquisas empíricas por levantar e reunir as diversas opiniões sobre a relação do just-in-time com o desempenho financeiro das empresas. 

  14. Transforming common-sense beliefs into Newtonian thinking through Just-In-Time Teaching

    Directory of Open Access Journals (Sweden)

    Sarah P. Formica

    2010-08-01

    Full Text Available To determine whether teaching an introductory physics course with a traditional lecture style or with Just-in-Time teaching (a student-centered, interactive-engagement style will help students to better understand Newtonian concepts, such as Newton’s Third Law, 222 students in introductory physics courses taught by traditional lecture styles and Just-in-Time teaching at North Georgia College & State University over the span of five semesters were examined using the Force Concept Inventory as a pretest and a post-test. Overall, the gains favor the Just-in-Time teaching method with a 37.6%±2.0% gain compared to the 17.9%±2.5% seen in traditional lecture classes. When analyzing only those gains pertaining to the Newton’s Third Law questions, the results again favor the Just-in-Time teaching method with a gain of 50.8%±4.1% while the traditional lecture classes only saw a gain of 6.6%±5.2%. We also employed a new method of analysis which was a BIT Coding method created to quickly identify students’ understanding of Newton’s Third Law questions. This study shows that students in courses that are taught using the Just-in-Time teaching strategy better understand Newton’s Third Law after instruction than do students in traditional lecture courses.

  15. Transforming common-sense beliefs into Newtonian thinking through Just-In-Time Teaching

    Directory of Open Access Journals (Sweden)

    Sarah P. Formica

    2010-08-01

    Full Text Available To determine whether teaching an introductory physics course with a traditional lecture style or with Just-in-Time teaching (a student-centered, interactive-engagement style will help students to better understand Newtonian concepts, such as Newton’s Third Law, 222 students in introductory physics courses taught by traditional lecture styles and Just-in-Time teaching at North Georgia College & State University over the span of five semesters were examined using the Force Concept Inventory as a pretest and a post-test. Overall, the gains favor the Just-in-Time teaching method with a 37.6%±2.0% gain compared to the 17.9%±2.5% seen in traditional lecture classes. When analyzing only those gains pertaining to the Newton’s Third Law questions, the results again favor the Just-in-Time teaching method with a gain of 50.8%±4.1% while the traditional lecture classes only saw a gain of 6.6%±5.2%. We also employed a new method of analysis which was a BIT Coding method created to quickly identify students’ understanding of Newton’s Third Law questions. This study shows that students in courses that are taught using the Just-in-Time teaching strategy better understand Newton’s Third Law after instruction than do students in traditional lecture courses.

  16. Electro-Pulse-Boring (EPB):Novel Super-Deep Drilling Technology for Low Cost Electricity

    Institute of Scientific and Technical Information of China (English)

    Hans O.Schiegg; Arild Rdland; Guizhi Zhu; David A Yuen

    2015-01-01

    The inexhaustible heat deposit in great depths (5–10 km) is a scientific fact. Such deposit occurs around the globe. Thereby, everybody is enabled to generate autonomously clean and renew-able energy, ample electricity and heat. The economical exploration and exploitation of this super-deep geothermal heat deposit requires a novel drilling technique, because the currently only deep drilling method (Rotary) is limited to about 5 km, due to the rising costs, depending exponentially on depth. Electro-pulse-boring (EPB) is a valuable option to Rotary drilling. EPB, originally investigated in Russia, is ready to be developed for industrialization. The feasibility of EPB is proven by many boreholes drilled up to 200 m in granite (crystalline). Estimates show outstanding low costs for drilling by EPB: 100€/m for a borehole with a large diameter (Ø) such as 20"(50 cm), independent on depth and applicable likewise for sediments and crystalline rocks, such as granite. The current rate of pene-tration (ROP) of 3 m per hour is planned to be augmented up to 35 m per hour, and again, irrespec-tive whether in sedimentary or crystalline formations. Consequently, a 10 km deep borehole with Ø 50 cm will ultimately be drilled within 12 days. EPB will create new markets, such as: (i) EPB shallow drilling for geotechnics, energy piles, measures in order to mitigate natural hazards, etc., (ii) EPB deep drilling (3–5 km) for hydro-geothermics, exploration campaigns etc. and (iii) EPB super-deep drilling (5–10 km) for petro-geothermics, enabling the economic generation of electricity. The autonomous and unlimited supply with cost efficient electricity, besides ample heat, ensures reliably clean and renew-able energy, thus, high supply security. Such development will provide a substantial relief to cope with the global challenge to limit the climate change below 2 ºC. The diminution of fossil fuels, due to the energy transition in order to mitigate the climate change, implies

  17. CCS to conduct Construction survey for China's first deep water semi-submersible drilling

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ On March 15,the grand signing ceremony on the contract between China National Offshore Oil Corp.(CNOOC)and China Classification Society(CCS)for the construction survey of deep water semi-submersible drilling unit was held at CCS Headquarters in Beijing.

  18. CCS to conduct construction survey for China's first deep water semi-submersible drilling

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ On March 15,the grand signing ceremony on the contract between China National Offshore Oil Corp.(CNOOC) and China Classification Society(CCS) for the construction survey of deep water semi-submersible drilling unit was held at CCS Headquarters in Beijing.

  19. Deep Drilling into a Mantle Plume Volcano: The Hawaii Scientific Drilling Project

    Directory of Open Access Journals (Sweden)

    Donald M. Thomas

    2009-03-01

    Full Text Available Oceanic volcanoes formed by mantle plumes, such as those of Hawaii and Iceland, strongly influence our views about the deep Earth (Morgan, 1971; Sleep, 2006. These volcanoes are the principal geochemical probe into the deep mantle, a testing ground for understanding mantle convection, plate tectonics and volcanism, and an archive of information on Earth’s magnetic field and lithospheredynamics. Study of the petrology, geochemistry, and structure of oceanic volcanoes has contributed immensely to our present understanding of deep Earth processes, but virtually all of this study has been concentrated on rocks available at the surface. In favorable circumstances, surface exposures penetrate to a depth of a few hundred meters, which is a small fraction of the 10- to 15-kilometer height of Hawaiian volcanoes above the depressed seafloor (Moore, 1987; Watts, 2001.

  20. Core drilling of deep drillhole OL-KR56 at Olkiluoto in Eurajoki 2011 - 2012

    Energy Technology Data Exchange (ETDEWEB)

    Toropainen, V. [Suomen Malmi Oy, Espoo (Finland)

    2012-07-15

    As a part of the confirming site investigations at Olkiluoto, Suomen Malmi Oy (Smoy) core drilled a 1201.65 m deep drillhole with a diameter of 75.7 mm at Olkiluoto in October 2011 - January 2012. The identification number of the drillhole is OL-KR56. A set of monitoring measurements and samplings from the drilling and returning water was carried out during the drilling. Both the volume and the electric conductivity of the returning and drilling water were recorded. The drill rig was computer controlled and the computer recorded drilling parameters during drilling. The objective of the measurements was to obtain more information about bedrock and groundwater properties. Sodium fluorescein was used as a label agent in the drilling water. The total volume of the used drilling, washing and flushing water was 1628 m{sup 3}. The measured volume of the returning water in the drillhole was 1142 m{sup 3}. The deviation of the drillhole was measured with the deviation measuring instruments Reflex EMS and Reflex Gyro. The main rock types are veined and diatexitic gneisses, pegmatitic granite and mica gneiss. The average fracture frequency is 2.4 pcs/m and the average RQD value is 96.2 %. Fifty fractured zones were penetrated by the drillhole. Uniaxial compressive strength, Young's Modulus and Poisson's ratio were measured from the core samples. The average uniaxial compressive strength was 120.0 MPa, the average Young's Modulus was 38.3 GPa and the average Poisson's ratio was 0.22. (orig.)

  1. Optimization of Deep Drilling Performance--Development and Benchmark Testing of Advanced Diamond Product Drill Bits & HP/HT Fluids to Significantly Improve Rates of Penetration

    Energy Technology Data Exchange (ETDEWEB)

    Alan Black; Arnis Judzis

    2003-10-01

    This document details the progress to date on the OPTIMIZATION OF DEEP DRILLING PERFORMANCE--DEVELOPMENT AND BENCHMARK TESTING OF ADVANCED DIAMOND PRODUCT DRILL BITS AND HP/HT FLUIDS TO SIGNIFICANTLY IMPROVE RATES OF PENETRATION contract for the year starting October 2002 through September 2002. The industry cost shared program aims to benchmark drilling rates of penetration in selected simulated deep formations and to significantly improve ROP through a team development of aggressive diamond product drill bit--fluid system technologies. Overall the objectives are as follows: Phase 1--Benchmark ''best in class'' diamond and other product drilling bits and fluids and develop concepts for a next level of deep drilling performance; Phase 2--Develop advanced smart bit--fluid prototypes and test at large scale; and Phase 3--Field trial smart bit--fluid concepts, modify as necessary and commercialize products. Accomplishments to date include the following: 4Q 2002--Project started; Industry Team was assembled; Kick-off meeting was held at DOE Morgantown; 1Q 2003--Engineering meeting was held at Hughes Christensen, The Woodlands Texas to prepare preliminary plans for development and testing and review equipment needs; Operators started sending information regarding their needs for deep drilling challenges and priorities for large-scale testing experimental matrix; Aramco joined the Industry Team as DEA 148 objectives paralleled the DOE project; 2Q 2003--Engineering and planning for high pressure drilling at TerraTek commenced; 3Q 2003--Continuation of engineering and design work for high pressure drilling at TerraTek; Baker Hughes INTEQ drilling Fluids and Hughes Christensen commence planning for Phase 1 testing--recommendations for bits and fluids.

  2. Combining conventional and thermal drilling in order to increase speed and reduce costs of drilling operations to access deep geothermal resources

    Science.gov (United States)

    Rossi, Edoardo; Kant, Michael A.; von Rohr, Philipp Rudolf; Saar, Martin O.

    2017-04-01

    The exploitation of deep geothermal resources for energy production relies on finding cost effective solutions to increase the drilling performance in hard rocks. Conventional rotary drilling techniques, based on mechanical rock exportation, result in high rates of drilling tool wearing, causing significant costs. Additionally, rotary drilling results in low drilling speeds in the typically hard crystalline basement rocks targeted for enhanced geothermal energy utilization technologies. Furthermore, even lower overall drilling rates result, when considering tripping times required to exchange worn drill tools. Therefore, alternative drilling techniques, such as hammering, thermal drilling, plasma drilling, and jetting processes are widely investigated in order to provide cost-effective alternatives to conventional drilling methods. A promising approach, that combines conventional rotary and thermal drilling techniques, is investigated in the present work. Here, the rock material is thermally weakened before being exported by conventional cutters. Heat is locally provided by a flame, which moves over the rock surface, heat-treating the material. Besides reducing the rock strength, an in-depth smoothening effect of the mechanical rock properties is observed due to the thermal treatment. This results in reduced rates of drill bit wearing and higher rates of penetration, which in turn decreases drilling costs significantly, particularly for deep-drilling projects. Due to the high heating rates, rock-hardening, commonly observed at moderate temperatures, can be avoided. The flame action can be modelled as a localized, high heat transfer coefficient flame treatment, which results in orders of magnitude higher heating rates than conventional oven treatments. Therefore, we analyse rock strength variations after different maximum temperatures, flame-based heating rates, and rock confinement pressures. The results show that flame treatments lead to a monotonous decrease of

  3. Improving Student Learning of Calculus Topics via Modified Just-in-Time Teaching Methods

    Science.gov (United States)

    Natarajan, Rekha; Bennett, Andrew

    2014-01-01

    Although the use of traditional just-in-time teaching techniques has long been viewed positively by students and instructors in undergraduate calculus courses, past studies in this area have not addressed gains in student achievement with respect to specific calculus topics. This paper investigates the latter by administering modified just-in-time…

  4. Just-in-time support for teachers’ technology-infused lesson planning

    NARCIS (Netherlands)

    Janssen, N.; Lazonder, A.W.

    2015-01-01

    Teachers need support when integrating innovative technologies in their lessons. In this research, two types of just-in-time support for lesson planning were compared on perceived usefulness and effectiveness. Both types contained the same technological information but differed regarding pedagogical

  5. Just-in-Time Teaching Techniques through Web Technologies for Vocational Students' Reading and Writing Abilities

    Science.gov (United States)

    Chantoem, Rewadee; Rattanavich, Saowalak

    2016-01-01

    This research compares the English language achievements of vocational students, their reading and writing abilities, and their attitudes towards learning English taught with just-in-time teaching techniques through web technologies and conventional methods. The experimental and control groups were formed, a randomized true control group…

  6. The AMIDA automatic content linking device: Just-in-time document retrieval in meetings

    NARCIS (Netherlands)

    Popescu-Belis, A.; Boertjes, E.M.; Kilgour, J.; Poller, P.; Castronovo, S.; Wilson, T.; Jaimes, A.; Carletta, J.

    2008-01-01

    The AMIDA Automatic Content Linking Device (ACLD) is a just-in-time document retrieval system for meeting environments. The ACLD listens to a meeting and displays information about the documents from the group's history that are most relevant to what is being said. Participants can view an outline

  7. Just-in-Time Retail Distribution : A Systems Perspective on Cross-Docking

    NARCIS (Netherlands)

    Buijs, Paul; Danhof, Hans W.; Wortmann, J.(Hans) C.

    2016-01-01

    Cross-docking is a just-in-time strategy for distribution logistics. It is aimed at reducing inventory levels and distribution lead times by creating a seamless flow of products from suppliers to customers. Prior supply chain literature has argued that creating such a seamless product flows requires

  8. Improving Student Learning of Calculus Topics via Modified Just-in-Time Teaching Methods

    Science.gov (United States)

    Natarajan, Rekha; Bennett, Andrew

    2014-01-01

    Although the use of traditional just-in-time teaching techniques has long been viewed positively by students and instructors in undergraduate calculus courses, past studies in this area have not addressed gains in student achievement with respect to specific calculus topics. This paper investigates the latter by administering modified just-in-time…

  9. Just-in-time characterization and certification of DOE-generated wastes

    Energy Technology Data Exchange (ETDEWEB)

    Arrenholz, D.A.; Primozic, F.J. [Benchmark Environmental Corp., Albuquerque, NM (United States); Robinson, M.A. [Los Alamos National Lab., NM (United States)

    1995-12-31

    Transportation and disposal of wastes generated by Department of Energy (DOE) activities, including weapons production and decontamination and decommissioning (D&D) of facilities, require that wastes be certified as complying with various regulations and requirements. These certification requirements are typically summarized by disposal sites in their specific waste acceptance criteria. Although a large volume of DOE wastes have been generated by past activities and are presently in storage awaiting disposal, a significant volume of DOE wastes, particularly from D&D projects. have not yet been generated. To prepare DOE-generated wastes for disposal in an efficient manner. it is suggested that a program of just-in-time characterization and certification be adopted. The goal of just-in-time characterization and certification, which is based on the just-in-time manufacturing process, is to streamline the certification process by eliminating redundant layers of oversight and establishing pro-active waste management controls. Just-in-time characterization and certification would rely on a waste management system in which wastes are characterized at the point of generation, precertified as they are generated (i.e., without iterative inspections and tests subsequent to generation and storage), and certified at the point of shipment, ideally the loading dock of the building from which the wastes are generated. Waste storage would be limited to accumulating containers for cost-efficient transportation.

  10. Registration concepts for the just-in-time artefact correction by means of virtual computed tomography

    Energy Technology Data Exchange (ETDEWEB)

    Kasperl, St.; Franz, M. [Fraunhofer Development Center for X-ray Technology EZRT, a cooperative dept. of the Fraunhofer Institutes IZFP Saarbrucken and IIS Erlangen, Furth (Germany)

    2007-07-01

    This article deals with the enhancement of accuracy in CT by just-in-time correction of artefacts (beam hardening, scattered radiation) caused by the interaction of X-rays with matter. The so called EAR method needs for simulation a registration of the object. Therefore the article presents two different registration concepts. (authors)

  11. Just-in-time information presentation and the acquisition of complex cognitive skills

    NARCIS (Netherlands)

    Kester, Liesbeth; Kirschner, Paul A.; Merrienboer, van Jeroen J.G.; Baumer, Anita

    2001-01-01

    This paper describes a model for just-in-time (JIT) presentation of information. Learners receive the information needed to carry out a task precisely at the time it is needed. The model is twofold: supportive information is best presented before practising task clusters while prerequisite informati

  12. Just-in-Time Retail Distribution : A Systems Perspective on Cross-Docking

    NARCIS (Netherlands)

    Buijs, Paul; Danhof, Hans W.; Wortmann, J.(Hans) C.

    2016-01-01

    Cross-docking is a just-in-time strategy for distribution logistics. It is aimed at reducing inventory levels and distribution lead times by creating a seamless flow of products from suppliers to customers. Prior supply chain literature has argued that creating such a seamless product flows requires

  13. Transforming common-sense beliefs into Newtonian thinking through Just-In-Time Teaching

    NARCIS (Netherlands)

    Formica, Sarah P.; Easley, Jessica L.; Spraker, Mark C.

    2010-01-01

    To determine whether teaching an introductory physics course with a traditional lecture style or with Just-in-Time teaching (a student-centered, interactive-engagement style) will help students to better understand Newtonian concepts, such as Newton's Third Law, 222 students in introductory physics

  14. Just-in-time - Its Fingerprint on Structures in Production Systems

    DEFF Research Database (Denmark)

    Christiansen, Thomas Bøhm

    1998-01-01

    In recent years, improvements in production systems have become more and more important. The Just-In-Time philosophy has been an important contributor. But what has happened to JIT since the ‘JIT-crusade’ carried out in the late 1980s in USA. This paper describes how three authors in the early 19...

  15. The Just in Time Approach To Effectively Use Business Software in College Business Courses.

    Science.gov (United States)

    Hoyt, Brian R.

    The skills necessary to compete in a fast paced business environment--critical thinking, risk taking, team building, project management, and others--are not and cannot be addressed in the traditional delivery of an undergraduate business course. The Ohio University-Lancaster Management program uses a project based, just-in-time (JIT) approach to…

  16. Just in time? Using QR codes for multi-professional learning in clinical practice.

    Science.gov (United States)

    Jamu, Joseph Tawanda; Lowi-Jones, Hannah; Mitchell, Colin

    2016-07-01

    Clinical guidelines and policies are widely available on the hospital intranet or from the internet, but can be difficult to access at the required time and place. Clinical staff with smartphones could use Quick Response (QR) codes for contemporaneous access to relevant information to support the Just in Time Learning (JIT-L) paradigm. There are several studies that advocate the use of smartphones to enhance learning amongst medical students and junior doctors in UK. However, these participants are already technologically orientated. There are limited studies that explore the use of smartphones in nursing practice. QR Codes were generated for each topic and positioned at relevant locations on a medical ward. Support and training were provided for staff. Website analytics and semi-structured interviews were performed to evaluate the efficacy, acceptability and feasibility of using QR codes to facilitate Just in Time learning. Use was intermittently high but not sustained. Thematic analysis of interviews revealed a positive assessment of the Just in Time learning paradigm and context-sensitive clinical information. However, there were notable barriers to acceptance, including usability of QR codes and appropriateness of smartphone use in a clinical environment. The use of Just in Time learning for education and reference may be beneficial to healthcare professionals. However, alternative methods of access for less technologically literate users and a change in culture of mobile device use in clinical areas may be needed.

  17. Effectiveness of Just in Time Teaching on Student Achievement in an Introductory Thermodynamics Course

    Science.gov (United States)

    Liberatore, Matthew W.; Morrish, Rachel M.; Vestal, Charles R.

    2017-01-01

    The utility of Just-In-Time-Teaching (JITT) is compared across course topics and groups of students not receiving JITT exercises in class. JITT feedback incorporated various active learning exercises based on students' performance on online homework problems from Sapling Learning. With over 200 students in two sections participating in the…

  18. Evolution of hole shape and size during short and ultrashort pulse laser deep drilling.

    Science.gov (United States)

    Döring, Sven; Szilagyi, John; Richter, Sören; Zimmermann, Felix; Richardson, Martin; Tünnermann, Andreas; Nolte, Stefan

    2012-11-19

    A detailed study of the influence of the pulse duration, from the femtosecond to the nanosecond regime, on the evolution of the hole shape and depth during percussion drilling in silicon is presented. Real-time backlight imaging of the hole development is obtained for holes up to 2 mm deep with aspect ratios extending to 25:1. For low pulse energies, the hole-shape and drilling characteristics are similar for femtosecond, picoseconds and nanosecond regimes. At higher pulse energies, ns-pulses exhibit slower average drilling rates but eventually reach greater final depths. The shape of these holes is however dominated by branching and large internal cavities. For ps-pulses, a cylindrical shape is maintained with frequent small bulges on the side-walls. In contrast, fs-pulses cause only a limited number of imperfections on a tapered hole shape.

  19. Multipolarity remanences in lower oceanic crustal gabbros recovered by drilling at Hess Deep (Integrated Ocean Drilling Program Expedition 345)

    Science.gov (United States)

    Morris, Antony; Horst, Andrew; Friedman, Sarah; Nozaka, Toshio

    2015-04-01

    A long-term goal of the scientific ocean drilling community is to understand the processes by which the ocean crust is constructed through magmatism, deformation, metamorphism and hydrothermal cooling. Insights into the magnetic properties of the lower crust have come from drilling at oceanic core complexes and in tectonic windows. At the Hess Deep Rift, propagation of the Cocos-Nazca Ridge into young, fast-spreading East Pacific Rise crust exposes a dismembered, but nearly complete lower crustal section. Here, IODP Expedition 345 (Site U1415) recovered primitive plutonic lithologies including gabbro, troctolitic gabbro and olivine gabbronorite. These rocks exhibit cumulate textures similar to those found in layered basic intrusions and some ophiolite complexes. Metamorphism is dominated by background greenschist facies alteration associated with cataclastic deformation that likely results from Cocos-Nazca rifting. Some intervals display complex, multiple remanence components within individual samples. A high temperature component unblocks above 500°-520°C and an intermediate temperature component of nearly antipodal direction unblocks between 425°-450°C and 500°-520°C. In addition, a few samples display a third component that unblocks between 100-350°C that is nearly parallel to the highest temperature component. These multiple, nearly antipodal components suggest that remanence was acquired in different geomagnetic chrons, and represent the first multipolarity remanences seen in Pacific lower oceanic crust. Similar remanence structures, however, have been reported in lower crustal gabbros recovered from slow-spreading rate crust along the Mid-Atlantic Ridge, and have been interpreted to reflect protracted accretion or protracted cooling. In contrast, at Hess Deep unblocking temperatures appear consistent with temperatures inferred for successive phases of alteration, suggesting an alteration history spanning at least two polarity chrons.

  20. The Iceland Deep Drilling Project (IDDP): (I) A New Era in Geothermal Development?

    Science.gov (United States)

    Elders, W. A.; Fridleifsson, G. O.; Bird, D. K.; Reed, M. H.; Schiffman, P.; Zierenberg, R.

    2007-12-01

    The Iceland Deep Drilling Project (IDDP) announced in September 2007 that an international industrial consortium has signed a new contract to collaborate in exploratory deep drilling in Iceland. The main objective of the IDDP is to investigate whether it is economically feasible to produce energy from geothermal systems at supercritical conditions. This will require drilling to depths of 4 to 5 km in order to reach temperatures of 400 to 600°C. Today, geothermal wells in Iceland typically range up to 2.5 km in depth and produce steam at about 300°C, or less, at a rate sufficient to generate about 4 to 7 megawatts of electricity. It is estimated that producing steam from a well penetrating a reservoir with temperatures >450°C, and at a rate of 0.67 cubic meters a second, could generate 40 to 50 MWe. If IDDP's test of this concept proves successful, it could lead to major improvements in the development of high-temperature geothermal resources worldwide. The consortium collaborating to fund this investigation of supercritical geothermal energy consists of three leading Icelandic power companies, Hitaveita Sudurnesja Ltd., Landsvirkjun, Orkuveita Reykjavikur, together with Orkustofnun (the National Energy Authority) and Alcoa Inc. (an international aluminum company). The three power companies financed a feasibility study for the project that was completed in 2003. Each of the three power companies is committed to drill, at their own cost, a 3.5 to 4.0 km deep well in a geothermal field that they operate. The design of these wells will permit them to be deepened to 4.5 or 5.0 km by the IDDP, and funded by the consortium with additional funds from international scientific agencies. The first deep IDDP well will be drilled in the latter part of 2008 in the Krafla geothermal field near the northern end of the central rift zone of Iceland, within a volcanic caldera that has had recent volcanic activity. Two new wells, ~4 km deep, will then be drilled at the Hengill and

  1. Clean hot water drilling for exploration of the Antarctic deep subglacial environment

    Science.gov (United States)

    Makinson, K.; Pearce, D.; Hodgson, D.; Bentley, M.; Smith, A.; Tranter, M.; Rose, M. C.; Ross, N.; Mowlem, M. C.; Parnell, J.; Siegert, M. J.

    2015-12-01

    Overlain by several kilometres of ice, the subglacial environments deep beneath the Antarctic Ice Sheet are regarded as extreme habitats for microbial life and repositories of important paleoclimate records. Of significant scientific interest, yet remaining largely unexplored, accessing and sampling these environments presents several challenges to existing drilling technologies. With over half of the ice sheet believed to be resting on a wet bed, much of it part of a hydrological drainage network, accessing of this environment must conform to international environmental contamination protocols. This makes hot water drilling the most viable option for clean, fast, access through thick ice. After two decades of planning, involving the development of drilling techniques for subglacial access, instrument design and logistics set up, significant progress has been made in attempts to directly access, measure, and sample subglacial lakes and sediments. Combining the experiences from the notable setbacks and successes, as well as recent field testing for this drilling technique, the most practical technical options and operational procedures for future clean entry into Subglacial Lake Ellsworth and other deep (>3000 m) access targets will be presented.

  2. A REVIEW ON SEQUENCING APPROACHES FOR MIXED-MODEL JUST-IN-TIME PRODUCTION SYSTEM

    Directory of Open Access Journals (Sweden)

    Tanka Dhamala

    2009-10-01

    Full Text Available Research interests have been focused on the concept of penalizing jobs both for being early and for being tardy because not only of modern competitive industrial challenges of providing a variety of products at a very low cost by smoothing productions but also of its increasing and exciting computer applications. Here, sequencing approaches of the mixed- model just-in-time production systems is reviewed. In this note, realizing a need of critical review, a survey on the elegant mathematical models, methods and complexity of the mixed- model just-in-time sequencing problem with an insight into the existing analytical literature is given. The established research results together with open problems and possible extensions are presented.

  3. Just In Time Value Chain Total Quality Management Part Of Technical Strategic Management Accounting

    Directory of Open Access Journals (Sweden)

    Lesi Hertati

    2015-08-01

    Full Text Available This article aims to determine Just In Time Value Chain Total Quality Management tqm as a technique in management accounting stategis.Tujuan Just In Time value chain or value chain Total Quality Management TQM is strategic for customer satisfaction in the long term obtained from the information. Quality information is the way to continuous improvement in order to increase the companys financial performance in the long term to increase competitive advantage. Strategic Management Accounting process gather competitor information explore opportunities to reduce costs integrate accounting with emphasis on the strategic position of the competition is a great plan. An overall strategic plan interrelated and serves as the basis for achieving targets or goals ahead.

  4. Deep Drilling Results in the Atlantic Ocean: Continental Margins and Paleoenvironment

    Science.gov (United States)

    1979-01-01

    volcanic hydrothermal exhalations. Bemuda Ri -For tiii-pc ds approximately However, the formation at most sites is not- near to- the seli~t traisiti -nfroi...A.C., et al., Initial Re- Greenwood, R., Cristobalite : its relationship to Gse ports Deep Sea Drilling Project, 14, 787-954 chert formation in...Ryan ; , l l l l l4 CONTENTS Preface " Mesozoic-Cerozoic Sedimentary Formations of the North American Basin. Western North Atlantic, L. F. Jansa, P. Enos

  5. Core drilling of deep borehole OL-KR43 at Olkiluoto in Eurajoki 2006

    Energy Technology Data Exchange (ETDEWEB)

    Niinimaeki, R. [Suomen Malmi Oy, Espoo (Finland)

    2006-12-15

    Posiva Oy submitted an application to the Finnish Government in May 1999 for the Decision in Principle to choose Olkiluoto in the municipality of Eurajoki as the site of the final disposal facility for spent nuclear fuel. A positive decision was made at the end of 2000 by the Government. The Finnish Parliament ratified the decision in May 2001. The decision makes it possible for Posiva to focus the confirming bedrock investigations at Olkiluoto, where in the next few years an underground rock characterisation facility, ONKALO, will be constructed. As a part of the investigations Suomen Malmi Oy (Smoy) core drilled 1000.26 m and 45.01 m deep boreholes with a diameter of 75.7 mm at Olkiluoto in July - October 2006. The identification numbers of the boreholes are OL-KR43 and OL-KR43B, respectively. A set of monitoring measurements and samplings from the drilling and returning water was carried out during the drilling. Both the volume and the electric conductivity of the drilling water and the returning water were recorded. The drill rig was computer controlled and during drilling the computer recorded drilling parameters. The objective of all these measurements was to obtain more information about bedrock and groundwater properties. Sodium fluorescein was used as a label agent in the drilling water. The total volumes of the used drilling and flushing water were 1103 m{sup 3} and 16 m{sup 3} in boreholes OL-KR43 and OL-KR43B, respectively. Measured volumes of the returning water were 916m{sup 3} in borehole OL-KR43 and 13m{sup 3} in borehole OL-KR43B. The deviation of the boreholes was measured with the deviation measuring instruments EMS and Maxibor. Uniaxial compressive strength, Young's Modulus and Poisson's ratio were measured from the core samples. The average uniaxial compressive strength is about 131 MPa, the average Young's Modulus is 37 GPa and the average Poisson's ratio is 0.19. The main rock types are veined gneiss, diatexitic gneiss

  6. Core drilling of deep borehole OL-KR37 at Olkiluoto in Eurajoki 2005

    Energy Technology Data Exchange (ETDEWEB)

    Niinimaeki, R. [Suomen Malmi Oy, Espoo (Finland)

    2005-11-15

    Posiva Oy submitted an application to the Finnish Government in May 1999 for the Decision in Principle to choose Olkiluoto in the municipality of Eurajoki as the site of the final disposal facility for spent nuclear fuel. A positive decision was made at the end of 2000 by the Government. The Finnish Parliament ratified the decision in May 2001. The decision makes it possible for Posiva to focus the confirming bedrock investigations at Olkiluoto, where in the next few years an underground rock characterisation facility, ONKALO, will be constructed. As a part of the investigations Suomen Malmi Oy (Smoy) core drilled 350.00 m and 45.10 m deep boreholes with a diameter of 75.7 mm at Olkiluoto in June- August 2005. The identification numbers of the boreholes are OL-KR37 and OL-KR37B, respectively. A set of monitoring measurements and samplings from the drilling and returning water was carried out during the drilling. Both the volume and the electric conductivity of the drilling water and the returning water were recorded. The drill rig was computer controlled and during drilling the computer recorded information about drilling parameters. The objective of all these measurements was to obtain more information about bedrock and groundwater properties. Sodium fluorescein was used as a label agent in the drilling water. The total volumes of the used drilling and flushing water were 273 m{sup 3} and 21m{sup 3} and the measured volumes of the returning water were 221m{sup 3} and 16m{sup 3} in boreholes OL-KR37 and OL-KR37B, respectively. The deviation of the borehole was measured with the deviation measuring instruments EMS and Maxibor. Uniaxial compressive strength, Young's Modulus and Poisson' s ratio were measured from the core samples. The average uniaxial compressive strength is about 106 MPa, the average Young's modulus is 40 GPa and the average Poisson's ratio is 0.20. The main rock types are migmatitic mica gneiss, granite and tonalite. Filled

  7. Core drilling of deep borehole OL-KR39 at Olkiluoto in Eurajoki 2005

    Energy Technology Data Exchange (ETDEWEB)

    Niinimaeki, R. [Suomen Malmi Oy, Espoo (Finland)

    2005-11-15

    Posiva Oy submitted an application to the Finnish Government in May 1999 for the Decision in Principle to choose Olkiluoto in the municipality of Eurajoki as the site of the final disposal facility for spent nuclear fuel. A positive decision was made at the end of 2000 by the Government. The Finnish Parliament ratified the decision in May 2001. The decision makes it possible for Posiva to focus the confirming bedrock investigations at Olkiluoto, where in the next few years an underground rock characterisation facility, ONKALO, will be constructed. As a part of the investigations Suomen Malmi Oy (Smoy) core drilled 502.97 m and 45.11 m deep boreholes with a diameter of 75.7 mm at Olkiluoto in August- October 2005. The identification numbers of the boreholes are OL-KR39 and OL-KR39B, respectively. A set of monitoring measurements and samplings from the drilling and returning water was carried out during the drilling. Both the volume and the electric conductivity of the drilling water and the returning water were recorded. The drill rig was computer controlled and during drilling the computer recorded drilling parameters. The objective of all these measurements was to obtain more information about bedrock and groundwater properties. Sodium fluorescein was used as a label agent in the drilling water. The total volumes of the used drilling and flushing water were 415m{sup 3} and 25 m{sup 3} and the measured volumes of the returning water were 175 m{sup 3} and 7 m{sup 3} in boreholes OLKR39 and OL-KR39B, respectively. The deviation of the borehole was measured with the deviation measuring instruments EMS and Maxibor. Uniaxial compressive strength, Young's Modulus and Poisson' s ratio were measured from the core samples. The average uniaxial compressive strength is about 110 MPa, the average Young's Modulus is 49 GP a and the average Poisson' s ratio is 0.25. The main rock types are migmatitic mica gneiss and granite. Filled fracture is the most common

  8. Just-in-time coding of the problem list in a clinical environment.

    OpenAIRE

    Warren, J. J.; Collins, J.; SORRENTINO, C.; Campbell, J.R.

    1998-01-01

    Clinically useful problem lists are essential to the CPR. Providing a terminology that is standardized and understood by all clinicians is a major challenge. UNMC has developed a lexicon to support their problem list. Using a just-in-time coding strategy, the lexicon is maintained and extended prospectively in a dynamic clinical environment. The terms in the lexicon are mapped to ICD-9-CM, NANDA, and SNOMED International classification schemes. Currently, the lexicon contains 12,000 terms. Th...

  9. Just-in-time adaptive decoder engine: a universal video decoder based on MPEG RVC

    OpenAIRE

    Gorin, Jérôme; Yviquel, Hervé; Prêteux, Françoise; Raulet, Mickaël

    2011-01-01

    International audience; In this paper, we introduce the Just-In-Time Adaptive Decoder Engine (Jade) project, which is shipped as part of the Open RVC-CAL Compiler (Orcc) project. Orcc provides a set of open-source software tools for managing decoders standardized within MPEG by the Reconfigurable Video Coding (RVC) experts. In this framework, Jade acts as a Virtual Machine for any decoder description that uses the MPEG RVC paradigm. Jade dynamically generates a native decoder representation s...

  10. Just-in-time information presentation and the acquisition of complex cognitive skills

    OpenAIRE

    Kester, L.; Kirschner, P.A.; Merriënboer, J.J.G. van; Baumer, A.

    2008-01-01

    This paper describes a model for just-in-time (JIT) presentation of information. Learners receive the information needed to carry out a task precisely at the time it is needed. The model is twofold: supportive information is best presented before practising task clusters while prerequisite information is best presented during practice on learning tasks. JIT supportive information presentation promotes schema construction through meaningful learning or elaboration. JIT prerequisite information...

  11. Adapting just-in-time inventory control to the hospital setting.

    Science.gov (United States)

    Chapman, S N

    1986-10-01

    The principles of Just-in-Time inventory management are essentially those of sensible management of productivity and waste. Much of the literature written about JIT, however, is limited in scope in that it focuses on applications in a manufacturing operation. The best way to assess JIT's applicability to all businesses, including hospitals, is to synthesize the characteristics into a basic, conceptual model, which the author does in the following article.

  12. Just-in-Time Teaching for Food Science: Creating an Active Learner Classroom

    Science.gov (United States)

    Marrs, Kathleen A.; Chism, Grady W., III

    2005-01-01

    Just-in-Time Teaching (JiTT) combines the best features of traditional in-class instruction with the communication potential available via the Web. We describe here how JiTT has been used in Biology Education and how it can be used in Food Science Education. JiTT uses Web-based "Warm Up" assignments due before class to stimulate critical thinking…

  13. AURORA BOREALIS - Icebreaking Deep-Sea Drilling Platform and Multi-Purpose Research Vessel

    Science.gov (United States)

    Lembke-Jene, L.; Biebow, N.; Kunz-Pirrung, M.; Thiede, J.; Egerton, P.; Azzolini, R.

    2009-04-01

    Future breakthroughs in scientific deep-sea drilling critically depend on our ability to perform field expeditions with state-of-the-art technologies and modern infrastructures. This will require major investments, both in terms of generating new, as well as maintaining and renovating existing infrastructure. Diverse models for science operations are presently projected, also within the context of scientific needs after the current phase of the IODP will come to an end. In spite of its critical role in global climate and tectonic evolution, the Arctic Ocean is one of the most unexplored ocean basins of the world, its geologic and paleo-environmental history remaining largely unknown. Restricted by circulating sea ice, scientific drilling has been slow to arrive in the Arctic Ocean. This lack of data remains and represents one of the largest gaps of information in modern Earth Science. We here report on the finalised technical planning of a new European research icebreaker and deep-sea drilling vessel, the AURORA BOREALIS, designed with an all-season capability of endurance in permanently ice-covered waters. The icebreaker will be able to carry out deep-sea drilling in ice-covered deep-sea basins primarily during the more favorable summer seasons in order to fulfill the needs of the IODP or its eventual successor as a Mission-Specific Platform. AURORA BOREALIS will be the most advanced polar research vessel in the world with a multi-functional role of drilling in deep ocean basins and supporting climate and environmental research and decision support for stakeholder governments within the next 35-40 years. It will feature the highest attainable icebreaker classification, considerably surpassing in performance all currently operating research icebreakers. New technological features to be implemented include a novel hull design and specialized dynamic positioning systems for operations under closed sea-ice cover conditions with up to 2.5 m ice thickness, combined with

  14. A Nonlinear Dynamic Finite Element Analysis of Drilling Shaft including Multispan Auxiliary Supports in Deep-Hole Machining

    Directory of Open Access Journals (Sweden)

    L. F. Kong

    2013-01-01

    Full Text Available This paper presents a method to enhance computational efficiency of the nonlinear dynamic analysis of the large-scale deep-hole drilling machine. Based on finite element model, the drilling shaft system is constructed into Timoshenko beam element on the basis of flexible rotary shaft so as to increase the accuracy of numerical calculation. In order to save the calculation time and resources, modal synthesis technique is adopted to reduce the feature modal of linear freedom degrees of drilling shaft system. As a result, the accuracy required by the non-linear analysis will not be loss. On the basis of these, the whirling characteristics of drilling shaft system are studied under the conditions of different shaft lengths, and simultaneously, the stability patterns of drilling shaft motion and its stability region are obtained in the selected drilling depth and cutting speed parameters while drilling intersection holes.

  15. Archive of Core and Site/Hole Data and Photographs from the Deep Sea Drilling Project (DSDP)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Deep Sea Drilling Project (DSDP) operated the D/V GLOMAR CHALLENGER from 1968-1983, drilling 1,112 holes at 624 sites worldwide. The DSDP was funded by the US...

  16. Key technologies for well drilling and completion in ultra-deep sour gas reservoirs, Yuanba Gasfield, Sichuan Basin

    Directory of Open Access Journals (Sweden)

    Jiaxiang Xia

    2016-12-01

    Full Text Available The Yuanba Gasfield is a large gas field discovered by Sinopec in the Sichuan Basin in recent years, and another main exploration area for natural gas reserves and production increase after the Puguang Gasfield. The ultra-deep sour gas reservoir in the Yuanba Gasfield is characterized by complicated geologic structure, deep reservoirs and complex drilled formation, especially in the continental deep strata which are highly abrasive with low ROP (rate of penetration and long drilling period. After many years of drilling practice and technical research, the following six key drilling and completion technologies for this type reservoir are established by introducing new tools and technologies, developing specialized drill bits and optimizing drilling design. They are: casing program optimization technology for ROP increasing and safe well completion; gas drilling technology for shallow continental strata and high-efficiency drilling technology for deep high-abrasion continental strata; drilling fluid support technologies of gas–liquid conversion, ultra-deep highly-deviated wells and horizontal-well lubrication and drag reduction, hole stability control and sour gas contamination prevention; well cementing technologies for gas medium, deep-well long cementing intervals and ultra-high pressure small space; horizontal-well trajectory control technologies for measuring instrument, downhole motor optimization and bottom hole assembly design; and liner completion modes and completion string optimization technologies suitable for this gas reservoir. Field application shows that these key technologies are contributive to ROP increase and efficiency improvement of 7000 m deep horizontal wells and to significant operational cycle shortening.

  17. Deep observation and sampling of the earth's continental crust (DOSECC): Continental scientific drilling workshop

    Energy Technology Data Exchange (ETDEWEB)

    1985-01-01

    Research summaries are presented of ongoing or proposed deep drilling programs to explore hydrothermal systems, buried astroblemes, continental crust, magma systems, mountain belt tectonics, subduction zones, and volcanoes. Separate abstracts have been prepared for individual papers. (ACR)

  18. Core drilling of deep borehole OL-KR3B at Olkiluoto in Eurajoki 2005

    Energy Technology Data Exchange (ETDEWEB)

    Rautio, T. [Suomen Malmi Oy, Espoo (Finland)

    2005-10-15

    Posiva Oy submitted an application for the Decision in Principle to the Finnish Government in May 1999. A positive decision was made at the end of 2000 by the Government. The Finnish Parliament ratified the Decision in Principle on the final disposal facility for spent nuclear fuel at Olkiluoto, Eurajoki in May 2001. The decision makes it possible for Posiva to focus the confirming bedrock investigations at Olkiluoto, where in the next few years an underground rock characterisation facility, ONKALO, will be constructed. As a part of the investigations Suomen Malmi Oy (Smoy) core drilled 530.60 m deep borehole with a diameter of 75.7 mm at Olkiluoto in summer 2005. This borehole was aimed to get additional information of the quality of bedrock in the area, where a new shaft with a diameter of 3 m is planned to be located. The identification number of the borehole is OL-KR38. A set of monitoring measurements and samplings from the drilling and returning water was carried out during the drilling. Both the volume and the electric conductivity of the drilling water and the returning water were recorded. The drill rig was computer controlled and during drilling the computer recorded information about drilling parameters. The objective of these measurements was to obtain more information about bedrock and groundwater properties. Sodium fluorescein was used as a label agent in the drilling water. The volume of the used drilling water was about 473m{sup 3} and the measured volume of the returning water was about 38m{sup 3} in borehole OL-KR38. The deviation of the borehole was measured with the deviation measuring instruments EMS and Devitool Peewee. The results of the EMS measurements indicate that borehole OL-KR38 deviates 1.02 m south and 0.58 m west from the target point at the borehole depth of 525 m. Uniaxial compressive strength, Young's Modulus and Poisson's ratio were measured from the core samples. The average uniaxial compressive strength is about 106

  19. Core drilling of deep drillhole OL-KR57 at Olkiluoto in Eurajoki 2011-2012

    Energy Technology Data Exchange (ETDEWEB)

    Toropainen, V. [Suomen Malmi Oy, Espoo (Finland)

    2012-07-15

    As a part of the confirming site investigations at Olkiluoto, Suomen Malmi Oy (Smoy) core drilled 401.71 m and 45.01 m deep drillholes, OL-KR57 and OL-KR57B, at Olkiluoto in September 2011 - January 2012. The diameter of the drillholes is 75.7 mm. A set of monitoring measurements and samplings from the drilling and returning water was carried out during the drilling. Both the volume and the electric conductivity of the returning and drilling water were recorded. The drill rig was computer controlled and the computer recorded drilling parameters during drilling. The objective of the measurements was to obtain more information about bedrock and groundwater properties. Sodium fluorescein was used as a label agent in the drilling water. The total volumes of the used drilling, flushing and washing water were 350 m3 and 30 m3 in the drillholes OL-KR57 and OL-KR57B, respectively. The measured volumes of the returning water in the drillholes were 328 m{sup 3} and 16.8 m{sup 3}, respectively. The deviations of the drillholes were measured with the deviation measuring instruments EMS and Gyro. Uniaxial compressive strength, Young's Modulus and Poisson's ratio were measured from the core samples. The average uniaxial compressive strength was 123.9 MPa, the average Young's Modulus was 42.6 GPa and the average Poisson's ratio was 0.23. The main rock types are veined and diatexitic gneisses, mica gneiss and tonaliticgranodioritic- granitic gneiss. The average fracture frequency is 2.5 pcs/m in drillhole OL-KR57 and 3.3 pcs/m in the drillhole OL-KR57B. The average RQD values are 95.0 % and 93.0 %. Seven separate fractured zones were interpreted from OL-KR57 and three fractured zones from OL-KR57B. (orig.)

  20. Core drilling of deep borehole OL-KR36 at Olkiluoto in Eurajoki 2005

    Energy Technology Data Exchange (ETDEWEB)

    Niinimaeki, R.; Rautio, T. [Suomen Malmi Oy, Espoo (Finland)

    2005-07-15

    Posiva Oy submitted an application for the Decision in Principle to the Finnish Government in May 1999. A positive decision was made at the end of 2000 by the Government. The Finnish Parliament ratified the Decision in Principle on the final disposal facility for spent nuclear fuel at Olkiluoto, Eurajoki in May 2001. The decision makes it possible for Posiva to focus the confirming bedrock investigations at Olkiluoto, where in the next few years an underground rock characterisation facility, ONKALO, will be constructed. As a part of the investigations Suomen Malmi Oy (Smoy) core drilled 205.17 m deep borehole with a diameter of 75.7 mm at Olkiluoto in May 2005. This borehole was aimed to get additional information of the quality of bedrock and the anomalous part of the bedrock and quality and the location of the fractured zones R19A and R19B. The identification number of the borehole is OL-KR36. A set of monitoring measurements and samplings from the drilling and returning water was carried out during the drilling. Both the volume and the electric conductivity of the drilling water and the returning water were recorded. The drill rig was computer controlled and during drilling the computer recorded information about drilling measurements. The objective of all these measurements was to obtain more information about bedrock and groundwater properties. Sodium fluorescein was used as a label agent in the drilling water. The volume of the used drilling water was about 117 m{sup 3} and the measured volume of the returning water was about 51m{sup 3} in borehole OL-KR36. The deviation of the borehole was measured with the deviation measuring instruments EMS and Maxibor. The results of the Maxibor measurements indicate that borehole OL-KR36 deviates 10.34 m left and 7.11 m up at the borehole depth of 204 m. Uniaxial compressive strength, Young's Modulus and Poisson' s ratio were measured from the core samples. The average uniaxial compressive strength is about 126

  1. Core drilling of deep borehole OL-KR34 at Olkiluoto in Eurajoki 2005

    Energy Technology Data Exchange (ETDEWEB)

    Rautio, T. [Suomen Malmi Oy, Espoo (Finland)

    2005-07-15

    Posiva Oy submitted an application for the Decision in Principle to the Finnish Government in May 1999. A positive decision was made at the end of 2000 by the Government. The Finnish Parliament ratified the Decision in Principle on the final disposal facility for spent nuclear fuel at Olkiluoto, Eurajoki in May 2001. The decision makes it possible for Posiva to focus the confirming bedrock investigations at Olkiluoto, where in the next few years an underground rock characterisation facility, ONKALO, will be constructed. As a part of the investigations Suomen Malmi Oy (Smoy) core drilled 100.07 m deep borehole with a diameter of 75.7 mm at Olkiluoto in April 2005. This borehole was aimed to get additional information of the quality of bedrock and the anomalous part of the bedrock and quality and the location of the fractured zones R19A and R19B. The identification number of the borehole is OL-KR34. A set of monitoring measurements and samplings from the drilling and returning water was carried out during the drilling. Both the volume and the electric conductivity of the drilling water and the returning water were recorded. The drill rig was computer controlled and during drilling the computer recorded information about drilling parameters. The objective of all measurements was to obtain more information about bedrock and groundwater properties. Sodium fluorescein was used as a label agent in the drilling water. The volume of the used drilling water was about 37m{sup 3} and the measured volume of the returning water was about 18m{sup 3} in borehole OL-KR34. The deviation of the borehole was measured with the deviation measuring instruments EMS and Maxibor. The results of the Maxibor measurements indicate that borehole OLKR34 deviates 0.84 m right and 0.15 m up at the borehole depth of 99 m. Uniaxial compressive strength, Young's Modulus and Poisson' s ratio were measured from the core samples. The average uniaxial compressive strength is about 142 MPa, the

  2. Core drilling of deep borehole OL-KR35 at Olkiluoto in Eurajoki 2005

    Energy Technology Data Exchange (ETDEWEB)

    Rautio, T. [Suomen Malmi Oy, Espoo (Finland)

    2005-07-15

    Posiva Oy submitted an application for the Decision in Principle to the Finnish Government in May 1999. A positive decision was made at the end of 2000 by the Government. The Finnish Parliament ratified the Decision in Principle on the final disposal facility for spent nuclear fuel at Olkiluoto, Eurajoki in May 2001. The decision makes it possible for Posiva to focus the confirming bedrock investigations at Olkiluoto, where in the next few years an underground rock characterisation facility, ONKALO, will be constructed. As a part of the investigations Suomen Malmi Oy (Smoy) core drilled 100.87 m deep borehole with a diameter of 75.7 mm at Olkiluoto in May 2005. This borehole was aimed to get additional information of the quality of bedrock and the anomalous part of the bedrock and quality and the location of the fractured zones R19A and R19B. The identification number of the borehole is OL-KR35. A set of monitoring measurements and samplings from the drilling and returning water was carried out during the drilling. Both the volume and the electric conductivity of the drilling water and the returning water were recorded. The drill rig was computer controlled and during drilling the computer recorded information about drilling parameters. The objective of all measurements was to obtain more information about bedrock and groundwater properties. Sodium fluorescein was used as a label agent in the drilling water. The volume of the used drilling water was about 53 m{sup 3} and the measured volume of the returning water was about 25 m{sup 3} in borehole OL-KR35. The deviation of the borehole was measured with the deviation measuring instruments EMS and Maxibor. The results of the Maxibor measurements indicate that borehole OL-KR35 deviates 0.49 m right and 0.30 m up at the borehole depth of 99 m. Uniaxial compressive strength, Young's Modulus and Poisson' s ratio were measured from the core samples. The average uniaxial compressive strength is about 90 MPa, the

  3. Overview of results from deep drilling in the Siljan Ring impact struct

    Science.gov (United States)

    Juhlin, C.

    2004-12-01

    A meteorite impact in Devonian time, about 360 million years ago, resulted in the formation of the 52 km wide Siljan ring impact structure. As part of the Swedish Deep Gas Drilling project two deep boreholes to nearly 7 km depth were drilled within the crater rim (Gravberg-1 and Stenberg-1). Several shallower boreholes were also drilled. Both deep boreholes penetrate mainly granitic rock to total depth. Prior to drilling, extensive geophysical surveying was carried out in the area. These surface investigation together with data from the boreholes provide a large amount of information on the geological conditions in the upper crystalline crust in the area. Main results are (1) high amplitude reflections from the granitic bedrock correspond to sub-horizontal dolerite sills, (2) the upper 1-1.5 km of crust is highly fractured with more competent rock below, (3) hydraulic conductivity is low at about 10-9 - 10-10 m/s, but not insignificant, (4) highly saline fluids (salinity of 10-15%) are present below 6 km, (5) isotope data on calcite indicate groundwater may percolate to great depth, (6) the temperature gradient is nearly constant to 7 km at 16 degrees/km, and (7) the stress field is anisotropic with the maximum horizontal and vertical stresses being about equal and the minimum horizontal stress being about 2/3 of the vertical. Although the rock is relatively intact below 1.5 km, fracture zones are present at varying intervals down to total depth in both boreholes. In the deeper parts of the Gravberg-1 borehole, relatively large concentrations of helium and nitrogen are present. The isotopic signature and concentration levels of the helium indicate that the water at these depths has been stagnant on the order of hundreds of millions of years.

  4. Just-in-time coding of the problem list in a clinical environment.

    Science.gov (United States)

    Warren, J J; Collins, J; Sorrentino, C; Campbell, J R

    1998-01-01

    Clinically useful problem lists are essential to the CPR. Providing a terminology that is standardized and understood by all clinicians is a major challenge. UNMC has developed a lexicon to support their problem list. Using a just-in-time coding strategy, the lexicon is maintained and extended prospectively in a dynamic clinical environment. The terms in the lexicon are mapped to ICD-9-CM, NANDA, and SNOMED International classification schemes. Currently, the lexicon contains 12,000 terms. This process of development and maintenance of the lexicon is described.

  5. APPLYING A JUST-IN-TIME INTEGRATED SUPPLY CHAIN MODEL WITH INVENTORY AND WASTE REDUCTION CONSIDERATIONS

    Directory of Open Access Journals (Sweden)

    Li-Hsing Ho

    2013-01-01

    Full Text Available Just-In-Time (JIT has been playing an important role in supply chain environments. Countless firms have been applying JIT in production to gain and maintain a competitive advantage. This study introduces an innovative model which integrates inventory and quality assurance in a JIT supply chain. This approach assumes that manufacturing will produce some defective items and those products will not influence the buyer’s purchase policy. The vendor absorbs all the inspection costs. Using a function to compute the expected amount of total cost every year will minimize the total cost and the nonconforming fraction. Finally, a numerical example further confirms this model.

  6. Coping with SLE: just in case vs. just in time: nurse's perspective.

    Science.gov (United States)

    Brown, S

    2013-10-01

    This paper considers the experiences of people with lupus in comparison with those with diabetes, and discusses the impact of lupus specialist nurses in information-giving and education under the guise of 'just in case' vs. 'just in time'. Now recognized as a difficult condition to diagnose, lupus can lead to significant worry and distress especially during delays to diagnosis and times of high disease activity. Providing appropriate, individualized information to people with lupus is embedded in specialist nursing practice and enables individuals to use the tools of self-management approaches in gaining control over everyday symptoms.

  7. Deep research drill hole at Kilauea Volcano, Hawaii. [1,262 m

    Energy Technology Data Exchange (ETDEWEB)

    Zablocki, C.J.; Tilling, R.I.; Peterson, D.W.; Christiansen, R.L.; Keller, G.V.

    1976-01-01

    A 1262-m-deep bore hole was drilled at the summit of Kilauea Volcano, Hawaii, to test predictions based on surface geophysical surveys and to obtain information on the hydrothermal regime above a postulated magma reservoir. Data from the drilling and geophysical borehole logs tend to confirm earlier predictions that a mound of brackish or saline water is present above the inferred magma body. Temperatures within the hydrothermal system are not sufficiently high to indicate deposits of economic interest, but the gradient toward the bottom of the hole (approximately 160 m below sea level) is high, about 370/sup 0/C per kilometer. The maximum temperature, 137/sup 0/C, is at the hole bottom.

  8. Teaching Splinting Techniques Using a Just-in-Time Training Instructional Video.

    Science.gov (United States)

    Cheng, Yu-Tsun; Liu, Deborah R; Wang, Vincent J

    2017-03-01

    Splinting is a multistep procedure that is seldom performed by primary care physicians. Just-in-time training (JITT) is an emerging teaching modality and can be an invaluable asset for infrequently performed procedures or in locations where teaching resources and trained professionals are limited. Our objective was to determine the utility of JITT for teaching medical students the short-arm (SA) volar splinting technique. This was a prospective randomized controlled pilot study. An instructional video on SA volar splinting was produced. Students viewed the video or had access to standard medical textbooks (control group) immediately before applying an SA volar splint. The students were assessed for the quality of the splint via a standard 6-point skills checklist. The times required for presplinting preparation and for completion of the splint were also measured. Just-in-time training group students scored higher on the splint checklist (mean [SD], 5.45 [1.06]; 95% confidence interval [CI], 4.99-5.92 vs mean [SD], 1.58 [1.12]; 95% CI, 1.04-2.12; P teaching and disseminating procedural skills, such as SA volar splinting.

  9. {open_quotes}Just-in-time inventory{close_quotes} proceed with caution!

    Energy Technology Data Exchange (ETDEWEB)

    Katterhenry, W.E.

    1995-08-01

    Just when the power generation industry was stabilizing along came mega government regulations and changing economic conditions that threw a monkey wrench into the works. Although improved inventory practices have helped solve some coal problems, other still remain. The Clean Air Act has resulted in fuel switching, blending, equipment changes, and other factors, all contributing to power plant personnel grey hair. Then along came Just-In-Time inventory practices. Not only is the plant required to make all these changes to meet regulatory requirements, but reduce the quantity of fuel in inventory to unheard of low levels. Why is it so difficult to precisely account for coal in inventory? After all, inventory is a simple matter of accurately measuring the coal coming in to the plant, measuring the coal used by the plant, and conducting an accurate physical inventory to measure the remaining coal. Add to this, a major coal inventory reduction policy, when base maps are not maintained or updated and are, therefore, not likely to be accurate. Some coal may have been stored below the prevailing water table, rendering the coal unusable. Weather conditions, such as major ice storms can render much of the coal unburnable. Unless accounted for, these things reduce the perceived amount of coal in inventory. This presentation will address these issues to assist in preventing potential unscheduled plant shut down and the need to purchase unscheduled blocks of emergency power. Just-In-Time Inventory isn`t as straightforward as first meets the eye.

  10. JiTTree: A Just-in-Time Compiled Sparse GPU Volume Data Structure

    KAUST Repository

    Labschutz, Matthias

    2015-08-12

    Sparse volume data structures enable the efficient representation of large but sparse volumes in GPU memory for computation and visualization. However, the choice of a specific data structure for a given data set depends on several factors, such as the memory budget, the sparsity of the data, and data access patterns. In general, there is no single optimal sparse data structure, but a set of several candidates with individual strengths and drawbacks. One solution to this problem are hybrid data structures which locally adapt themselves to the sparsity. However, they typically suffer from increased traversal overhead which limits their utility in many applications. This paper presents JiTTree, a novel sparse hybrid volume data structure that uses just-in-time compilation to overcome these problems. By combining multiple sparse data structures and reducing traversal overhead we leverage their individual advantages. We demonstrate that hybrid data structures adapt well to a large range of data sets. They are especially superior to other sparse data structures for data sets that locally vary in sparsity. Possible optimization criteria are memory, performance and a combination thereof. Through just-in-time (JIT) compilation, JiTTree reduces the traversal overhead of the resulting optimal data structure. As a result, our hybrid volume data structure enables efficient computations on the GPU, while being superior in terms of memory usage when compared to non-hybrid data structures.

  11. Rich media streaming for just-in-time training of first responders

    Science.gov (United States)

    Bandera, Cesar; Marsico, Michael

    2005-05-01

    The diversity of first responders and of asymmetric threats precludes the effectiveness of any single training syllabus. Just-in-time training (JITT) addresses this variability, but requires training content to be quickly tailored to the subject (the threat), the learner (the responder), and the infrastructure (the C2 chain from DHS to the responder"s equipment). We present a distributed system for personalized just-in-time training of first responders. The authoring and delivery of interactive rich media and simulations, and the integration of JITT with C2 centers, are demonstrated. Live and archived video, imagery, 2-D and 3-D models, and simulations are autonomously (1) aggregated from object-oriented databases into SCORM-compliant objects, (2) tailored to the individual learner"s training history, preferences, connectivity and computing platform (from workstations to wireless PDAs), (3) conveyed as secure and reliable MPEG-4 compliant streams with data rights management, and (4) rendered as interactive high-definition rich media that promotes knowledge retention and the refinement of learner skills without the need of special hardware. We review the object-oriented implications of SCORM and the higher level profiles of the MPEG-4 standard, and show how JITT can be integrated into - and improve the ROI of - existing training infrastructures, including COTS content authoring tools, LMS/CMS, man-in-the-loop simulators, and legacy content. Lastly, we compare the audiovisual quality of different streaming platforms under varying connectivity conditions.

  12. Deep Geothermal Drilling Using Millimeter Wave Technology. Final Technical Research Report

    Energy Technology Data Exchange (ETDEWEB)

    Oglesby, Kenneth [Impact Technologies LLC, Tulsa, OK (United States); Woskov, Paul [MIT (Massachusetts Inst. of Technology), Cambridge, MA (United States); Einstein, Herbert [MIT (Massachusetts Inst. of Technology), Cambridge, MA (United States); Livesay, Bill [MIT (Massachusetts Inst. of Technology), Cambridge, MA (United States)

    2014-12-30

    Conventional drilling methods are very mature, but still have difficulty drilling through very deep,very hard and hot rocks for geothermal, nuclear waste entombment and oil and gas applications.This project demonstrated the capabilities of utilizing only high energy beams to drill such rocks,commonly called ‘Direct Energy Drilling’, which has been the dream of industry since the invention of the laser in the 1960s. A new region of the electromagnetic spectrum, millimeter wave (MMW) wavelengths at 30-300 giga-hertz (GHz) frequency was used to accomplish this feat. To demonstrate MMW beam drilling capabilities a lab bench waveguide delivery, monitoring and instrument system was designed, built and tested around an existing (but non-optimal) 28 GHz frequency, 10 kilowatt (kW) gyrotron. Low waveguide efficiency, plasma generation and reflected power challenges were overcome. Real-time monitoring of the drilling process was also demonstrated. Then the technical capability of using only high power intense millimeter waves to melt (with some vaporization) four different rock types (granite, basalt, sandstone, limestone) was demonstrated through 36 bench tests. Full bore drilling up to 2” diameter (size limited by the available MMW power) was demonstrated through granite and basalt samples. The project also demonstrated that MMW beam transmission losses through high temperature (260°C, 500oF), high pressure (34.5 MPa, 5000 psi) nitrogen gas was below the error range of the meter long path length test equipment and instruments utilized. To refine those transmission losses closer, to allow extrapolation to very great distances, will require a new test cell design and higher sensitivity instruments. All rock samples subjected to high peak temperature by MMW beams developed fractures due to thermal stresses, although the peak temperature was thermodynamically limited by radiative losses. Therefore, this limited drill rate and rock strength data were not able to be

  13. The Iceland Deep Drilling Project (IDDP): (I) Status and Future Plans.

    Science.gov (United States)

    Elders, W. A.; Fridleifsson, G. O.; Bird, D. K.; Schiffman, P.; Zierenberg, R.; Reed, M. H.

    2006-12-01

    The IDDP represents a challenging step forward in the worldwide development of geothermal energy by assessing the potential of power production from natural supercritical fluids. A feasibility study in 2003 concluded that in order to reach fluids at temperatures of >400°C drilling to depths of 4 to 5 km is necessary, but the resultant superheated steam should have a power output ten times that of conventional subcritical steam with the same volumetric flow rate. A consortium of leading Icelandic energy companies together with a government agency, the Icelandic Energy Authority, is carrying out the IDDP. In late 2003 a member of the consortium offered a planned exploratory well to the IDDP for deepening. This is in a geothermal system that produces hydrothermally modified seawater on the Reykjanes peninsula, in southern Iceland, where the Mid-Atlantic Ridge comes on land. Processes at depth at Reykjanes should be similar to those responsible for black smokers on ocean spreading centers. This well reached 3.1 km in February 2005, and research on the downhole samples began. Unfortunately the well became plugged during a flow test and was abandoned in February 2006 after attempts to recondition it failed. This led to the IDDP deciding to move the site for the first deep borehole to Krafla, near the northern end of the central rift zone of Iceland, within a volcanic caldera that has had recent volcanic activity. The Krafla geothermal system has higher temperature gradients than at Reykjanes but produces hydrothermally modified meteoric water with magmatic gases. The drill site chosen is near an existing well that encountered 340°C at only 2.5 km depth. It will be rotary drilled with spot coring to 3.5 km depth, and then deepened to ~4.5 km, using continuous wireline coring for scientific purposes. However, given the competition for drilling rigs internationally, and the year-long lead times in obtaining specialized well casings, it will be a year before IDDP begins

  14. An experimental result of surface roughness machining performance in deep hole drilling

    Directory of Open Access Journals (Sweden)

    Mohamad Azizah

    2016-01-01

    Full Text Available This study presents an experimental result of a deep hole drilling process for Steel material at different machining parameters which are feed rate (f, spindle speed (s, the depth of the hole (d and MQL, number of drops (m on surface roughness, Ra. The experiment was designed using two level full factorial design of experiment (DoE with centre points to collect surface roughness, Ra values. The signal to noise (S/N ratio analysis was used to discover the optimum level for each machining parameters in the experiment.

  15. A New Calculation Method of Dynamic Kill Fluid Density Variation during Deep Water Drilling

    Directory of Open Access Journals (Sweden)

    Honghai Fan

    2017-01-01

    Full Text Available There are plenty of uncertainties and enormous challenges in deep water drilling due to complicated shallow flow and deep strata of high temperature and pressure. This paper investigates density of dynamic kill fluid and optimum density during the kill operation process in which dynamic kill process can be divided into two stages, that is, dynamic stable stage and static stable stage. The dynamic kill fluid consists of a single liquid phase and different solid phases. In addition, liquid phase is a mixture of water and oil. Therefore, a new method in calculating the temperature and pressure field of deep water wellbore is proposed. The paper calculates the changing trend of kill fluid density under different temperature and pressure by means of superposition method, nonlinear regression, and segment processing technique. By employing the improved model of kill fluid density, deep water kill operation in a well is investigated. By comparison, the calculated density results are in line with the field data. The model proposed in this paper proves to be satisfactory in optimizing dynamic kill operations to ensure the safety in deep water.

  16. Exploring the plutonic crust at a fast-spreading ridge:new drilling at Hess Deep

    Energy Technology Data Exchange (ETDEWEB)

    Gillis, Kathryn M. [Univ. of Victoria, BC (Canada). School of Earth and Ocean Sciences; Snow, Jonathan E. [Univ. of Houston, Houston, TX (United States). Earth & Atmospheric Sciences; Klaus, Adam [Texas A & M Univ., College Station, TX (United States). Integrated Ocean Drilling Program (IODP). United States Implementing Organization.; Guerin, Gilles [Lamont-Doherty Earth Observatory of Columbia Univ., Palisades, NY (United States). Borehole Research Group; Abe, Natsue [Japan Agency for Marine-Earth Science and Technology (JAMSTEC), Yokosuka (Japan). Inst. for Research on Earth Evolution (IFREE); Akizawa, Norikatsu [Kanazawa Univ. (Japan). Dept. of Earth Sciences; Ceuleneer, Georges [Univ. Paul Sabatier, Toulouse (France). Observatoire Midi-Pyrenees (UMS 831), CNRS; Cheadle, Michael J. [Univ. of Wyoming, Laramie, WY (United States). Dept. of Geology and Geophysics; Adriao, Alden de Brito [Federal Univ. of Rio Grande do Sul, Porto Alegre (Brazil). Geology Inst. (IGEO); Faak, Kathrin [Ruhr Univ., Bochum (Germany). Geological Inst.; Falloon, Trevor J. [Univ. of Tasmania, Hobart, TAS (Australia). Inst. for Marine and Antarctic Studies; Friedman, Sarah A. [Southern Illinois Univ., Carbondale, IL (United States). Dept. of Geology; Godard, Marguerite M. [Univ. Montpellier II (France). Geosciences Montpellier-UMR 5243; Harigane, Yumiko [National Inst. of Advanced Industrial Science and Technology (AIST), Tsukuba (Japan). Marine Geology Dept.; Horst, Andrew J. [Syracuse Univ., NY (United States). Dept. of Earth Science; Hoshide, Takashi [Tohoku Univ., Sendai (Japan). Graduate School of Science; Ildefonse, Benoit [Univ. Montpellier II (France). Lab. de Tectonophysique; Jean, Marlon M. [Northern Illinois Univ., DeKalb, IL (United States). Dept. of Geology and Environmental Geosciences; John, Barbara E. [Univ. of Wyoming, Laramie, WY (United States). Dept. of Geology and Geophysics; Koepke, Juergen H. [Univ. of Hannover (Germany). Inst. of Mineralogy; Machi, Sumiaki [Kanazawa Univ. (Japan). Dept. of Earth Sciences; Maeda, Jinichiro [Hokkaido Univ., Sapporo (Japan). Dept. of Natural History Sciences; Marks, Naomi E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States). Chemistry and Material Sciences Dept.; McCaig, Andrew M. [Univ. of Leeds (United Kingdom). School of Earth and Environment; Meyer, Romain [Univ. of Bergen (Norway). Dept. of Earth Science and Centre for Geobiology; Morris, Antony [Univ. of Plymouth (United Kingdom). School of Earth, Ocean & Environmental Sciences; Nozaka, Toshio [Okayama Univ. (Japan). Dept. of Earth Sciences; Python, Marie [Hokkaido Univ., Sapporo (Japan). Dept. of Earth and Planetary Sciences; Saha, Abhishek [Indian Inst. of Science (IISC), Bangalore (India). Centre for Earth Sciences; Wintsch, Robert P. [Indiana Univ., Bloomington, IN (United States). Dept. of Geological Sciences

    2013-02-28

    Integrated Ocean Drilling Program (IODP) Hess Deep Expedition 345 was designed to sample lower crustal primitive gabbroic rocks that formed at the fast-spreading East Pacific Rise (EPR) in order to test models of magmatic accretion and the intensity of hydrothermal cooling at depth. The Hess Deep Rift was selected to exploit tectonic exposures of young EPR plutonic crust, building upon results from ODP Leg 147 as well as more recent submersible, remotely operated vehicle, and near-bottom surveys. The primary goal was to acquire the observations required to test end-member crustal accretion models that were in large part based on relationships from ophiolites, in combination with mid-ocean ridge geophysical studies. This goal was achieved with the recovery of primitive layered olivine gabbros and troctolites with many unexpected mineralogical and textural relationships, such as the abundance of orthopyroxene and the preservation of delicate skeletal olivine textures.

  17. Messinian Salinity Crisis - DREAM (Deep-sea Record of Mediterranean Messinian events) drilling projects

    Science.gov (United States)

    Lofi, Johanna; Camerlenghi, Angelo

    2014-05-01

    About 6 My ago the Mediterranean Sea was transformed into a giant saline basin. This event, commonly referred to as the Messinian salinity crisis (MSC), changed the chemistry of the global ocean and had a permanent impact on both the terrestrial and marine ecosystems of a huge area surrounding the Mediterranean area. The first fascinating MSC scenario was proposed following DSDP Leg XIII in 1970 and envisaged an almost desiccated deep Mediterranean basin with a dramatic ~1,500 m drop of sea level, the incision of deep canyons by rivers on the continental margins, and a final catastrophic flooding event when the connections between the Mediterranean Sea and the Atlantic were re-established ~5.33 My ago. In spite of 40 years of multi-disciplinary research conducted on the MSC, modalities, timing, causes, chronology and consequence at local and planetary scale are still not yet fully understood, and the MSC event remains one of the longest-living controversies in Earth Science. Key factor for the controversy is the lack of a complete record of the MSC preserved in the deepest Mediterranean basins. Anywhere else, the MSC mostly generated a sedimentary/time lag corresponding to a widespread erosion surface. Correlations with the offshore depositional units are thus complex, preventing the construction of a coherent scenario linking the outcropping MSC evaporites, the erosion on the margins, and the deposition of clastics and evaporites in the abyssal plains. Recent activity by various research groups in order to identify locations for multiple-site drilling (including riser-drilling) in the Mediterranean Sea that would contribute to solve the open questions still existing about the MSC has culminated in two DREAM Magellan+ Workshops held in 2013 and 2014. A strategy and work plan have been established in order to submit an IODP Multi-phase Drilling Project("Uncovering A Salt Giant")including several site-specific drilling proposals addressing different scientific

  18. Heuristic and Exact Algorithms for the Two-Machine Just in Time Job Shop Scheduling Problem

    Directory of Open Access Journals (Sweden)

    Mohammed Al-Salem

    2016-01-01

    Full Text Available The problem addressed in this paper is the two-machine job shop scheduling problem when the objective is to minimize the total earliness and tardiness from a common due date (CDD for a set of jobs when their weights equal 1 (unweighted problem. This objective became very significant after the introduction of the Just in Time manufacturing approach. A procedure to determine whether the CDD is restricted or unrestricted is developed and a semirestricted CDD is defined. Algorithms are introduced to find the optimal solution when the CDD is unrestricted and semirestricted. When the CDD is restricted, which is a much harder problem, a heuristic algorithm is proposed to find approximate solutions. Through computational experiments, the heuristic algorithms’ performance is evaluated with problems up to 500 jobs.

  19. THE APPLICATION OF THE JUST-IN-TIME PHILOSOPHY IN THE CHINESE CONSTRUCTION INDUSTRY

    Directory of Open Access Journals (Sweden)

    Low Sui Pheng

    2011-10-01

    Full Text Available The Just-in-Time (JIT philosophy originated from the Toyota Production System (TPS and has been used in the manufacturing industry for many decades. It has helped to increase the productivity of the industry and has also increased the quality of its products. In recent years, numerous studies in developed countries have endeavoured to introduce JIT in the construction industry to reap similar benefits. This study focused on applying JIT to the Chinese construction industry with the goal of improving its performance and thus its competitiveness. This paper discusses the current state of the Chinese construction industry; presents the potential impediments to implementing JIT; and proposes a framework for JIT implementation in the areas of design, procurement, construction and inspection. The results of this study suggest that government and educational institutions should play a key role in spearheading the application of JIT in the construction industry in China.

  20. A study on the applicability of just-in-time in manufacturing of ethanol

    Directory of Open Access Journals (Sweden)

    Marcelo Giroto Rebelato

    2012-08-01

    Full Text Available The aim of this paper is to analyze the applicability of the Just-in-Time (JIT System in manufacturing of ethanol. For this, were selected from the specialized literature the requirements that make up the JIT System so that each requirement identified was confronted to the characteristics and peculiarities of the process and current technology of producing ethanol. We conclude that, although the most significant requirement of the JIT system, manufacturing in the rhythm of "customer pull" is not possible in the manufacture of ethanol given the peculiar characteristic of its main raw material, sugarcane, we conclude that JIT is applicable to the ethanol production system and can bring real benefits to companies that adopt it.

  1. Using Second Life for Just-in-Time Training: Building Teaching Frameworks in Virtual Worlds

    Directory of Open Access Journals (Sweden)

    Gail Kopp

    2010-08-01

    Full Text Available This paper presents a framework for using virtual worlds in the construction of teaching platforms for just-in-time training. In the critical economic situation that many companies are currently living, the need to update skills without leaving the workplace has become urgent. Employees are demanding training for higher performances, knowledge and skills, without requesting time to attend university, or leaving their work behind. In this context, the use of virtual worlds has become the way knowledge is shared and accessed, as virtual groups become learning communities. The potential of Second Life as a space to learn and be trained are explored. The characteristics and capabilities of virtual worlds for teaching and learning are examined, the role of the virtual tutor is analyzed, and further areas of research and development are presented.

  2. Monitoring deep twist drilling for a rapid manufacturing of light high-strength parts

    Science.gov (United States)

    López de Lacalle, L. N.; Fernández, A.; Olvera, D.; Lamikiz, A.; Olvera, D.; Rodríguez, C.; Elias, A.

    2011-10-01

    In this work the manufacturing of high strength and/or high functional components is presented, using a new technique based on considerably long twist drills, called Deep Twist Drilling (DTD). This technology opens a rapid and economical method to manufacture parts for structural applications. Components made with this technique can reach high mass reduction and better stress distribution in comparison with welding or bolted parts with the same weight. However the application of DTD must be optimized to improve the reliability of the process and to make it economically feasible. In order to reach it, previous optimization by process monitoring was performed in AISI 1045, stainless steels, Ti6Al4V and nodular cat iron GGG70(AISI A536, SAE-ASTM 100-70-03). These materials are commonly used for structural applications in several sectors. Monitoring opened the way to improve cutting conditions and allow the application of the DTD technique focusing on a new design concept. In the same way monitoring makes drilling process reliable enough to be systematically used in industrial applications by a controlled increase of the performance demanded from the tool. In this manner, not only the objective to produce high-strength and light pieces is achieved, but also a high repetitive process is reached. In this research work a case of study is presented. A monolithic satellite-type component, its mass were reduced from 25 to 4.5 kg. The structural behavior of the component was studied under FEM analysis and the results showed high strength to compression and shear forces. During the machining of this element there was a serious risk of drill breakage due to the depth of the holes and crossing points between them; however, the previous process optimization eliminated this drawback. As a matter of fact, this paper brings out a good example where manufacturing technology allows a better performance of mechanical components within the philosophy of "new processes drive to new

  3. Improved Tubulars for Better Economics in Deep Gas Well Drilling using Microwave Technology

    Energy Technology Data Exchange (ETDEWEB)

    Dinesh Agrawal; Paul Gigl; Mark Hunt; Mahlon Dennis

    2007-07-31

    The main objective of the entire research program has been to improve the rate-of-penetration in deep hostile environments by improving the life cycle and performance of coiled-tubing, an important component of a deep well drilling system for oil and gas exploration, by utilizing the latest developments in the microwave materials technology. Based on the results of the Phase I and insurmountable difficulties faced in the extrusion and de-waxing processes, the approach of achieving the goals of the program was slightly changed in the Phase II in which an approach of microwave sintering combined with Cold Isostatic Press (CIP) and joining (by induction or microwave) has been adopted. This process can be developed into a semicontinuous sintering process if the CIP can produce parts fast enough to match the microwave sintering rates. The main objective of the Phase II research program is to demonstrate the potential to economically manufacture microwave processed coiled tubing with improved performance for extended useful life under hostile coiled tubing drilling conditions. After the completion of the Phase II, it is concluded that scale up and sintering of a thin wall common O.D. size tubing that is widely used in the market is still to be proved and further experimentation and refinement of the sintering process is needed in Phase III. Actual manufacturing capability of microwave sintered, industrial quality, full length tubing will most likely require several million dollars of investment.

  4. Improved Tubulars for Better Economics in Deep Gas Well Drilling Using Microwave Technology

    Energy Technology Data Exchange (ETDEWEB)

    Dinesh Agrawal

    2006-09-30

    The main objective of the entire research program has been to improve the rate-of-penetration in deep hostile environments by improving the life cycle and performance of coiled-tubing, an important component of a deep well drilling system for oil and gas exploration, by utilizing the latest developments in the microwave materials technology. Based on the results of the Phase I and insurmountable difficulties faced in the extrusion and de-waxing processes, the approach of achieving the goals of the program was slightly changed in the Phase II in which an approach of microwave sintering combined with Cold Isostatic Press (CIP) and joining (by induction or microwave) has been adopted. This process can be developed into a semicontinuous sintering process if the CIP can produce parts fast enough to match the microwave sintering rates. The main objective of the Phase II research program is to demonstrate the potential to economically manufacture microwave processed coiled tubing with improved performance for extended useful life under hostile coiled tubing drilling conditions. After the completion of the Phase II, it is concluded that scale up and sintering of a thin wall common O.D. size tubing that is widely used in the market is still to be proved and further experimentation and refinement of the sintering process is needed in Phase III. Actual manufacturing capability of microwave sintered, industrial quality, full length tubing will most likely require several million dollars of investment.

  5. Electrodril system field test program. Phase II, task B: deep drilling system demonstration. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1978-12-15

    The effort included the design, fabrication and Systems Verification Testing of the Deep Drilling System. The Systems Verification Test was conducted during October 1978 in a test well located on the premises of Brown Oil Tools Inc., Houston, Texas. In general, the Systems Verification test program was an unqualified success. All of the system elements of the Deep Drilling System were exercised and evaluated and in every instance the system can be declared ready for operational well demonstration. The motor/bit shaft combination operated very well and seal performance exceeds the design goals. The rig floor system performed better than expected. The power cable flexural characteristics are much better than anticipated and longitudinal stability is excellent. The prototype production connectors have functioned without failure. The cable reels and drive skid have also worked very well during the test program. The redesigned and expanded instrumentation subsystem also functioned very well. Some electronic component malfunctions were experienced during the early test stages, but they were isolated quickly and repaired. Subsequent downhole instrumentation deployments were successfully executed and downhole data was displayed both in the Electrodril instrumentation trailer and on the remote control and display unit.

  6. Just in Time DSA-The Hanford Nuclear Safety Basis Strategy

    Energy Technology Data Exchange (ETDEWEB)

    Olinger, S. J.; Buhl, A. R.

    2002-02-26

    The U.S. Department of Energy, Richland Operations Office (RL) is responsible for 30 hazard category 2 and 3 nuclear facilities that are operated by its prime contractors, Fluor Hanford Incorporated (FHI), Bechtel Hanford, Incorporated (BHI) and Pacific Northwest National Laboratory (PNNL). The publication of Title 10, Code of Federal Regulations, Part 830, Subpart B, Safety Basis Requirements (the Rule) in January 2001 imposed the requirement that the Documented Safety Analyses (DSA) for these facilities be reviewed against the requirements of the Rule. Those DSA that do not meet the requirements must either be upgraded to satisfy the Rule, or an exemption must be obtained. RL and its prime contractors have developed a Nuclear Safety Strategy that provides a comprehensive approach for supporting RL's efforts to meet its long term objectives for hazard category 2 and 3 facilities while also meeting the requirements of the Rule. This approach will result in a reduction of the total number of safety basis documents that must be developed and maintained to support the remaining mission and closure of the Hanford Site and ensure that the documentation that must be developed will support: compliance with the Rule; a ''Just-In-Time'' approach to development of Rule-compliant safety bases supported by temporary exemptions; and consolidation of safety basis documents that support multiple facilities with a common mission (e.g. decontamination, decommissioning and demolition [DD&D], waste management, surveillance and maintenance). This strategy provides a clear path to transition the safety bases for the various Hanford facilities from support of operation and stabilization missions through DD&D to accelerate closure. This ''Just-In-Time'' Strategy can also be tailored for other DOE Sites, creating the potential for large cost savings and schedule reductions throughout the DOE complex.

  7. Sistema Toyota de produção: mais do que simplesmente Just-in-Time

    Directory of Open Access Journals (Sweden)

    Paulo Ghinato

    1995-12-01

    Full Text Available As interpretações acerca do Sistema Toyota de Produção (STP, apontando o Just-In-Time e o Kanban como sua essência, demostram um entendimento limitado de sua verdadeira abrangência e potencialidade. O STP está estruturado sobre a base da completa eliminação das perdas, tendo o JIT e a autonomação como seus dois pilares de sustentação. O Controle da Qualidade Zero Defeitos (CQZD aparece, também, como elemento essencial para a operacionalização da autonomação e funcionalidade de todo o sistema. Neste artigo, pretende-se apresentar um modelo que represente esta interpretação. Com este propósito, o modelo apresentado por Monden é adotado como ponto de partida, introduzindo-lhe, no entanto, significativas mudanças. Neste artigo, discute-se cada uma das relações mantidas pela autonomação e pelo CQZD com os diversos componentes do sistema.The interpretations of the Toyota Production System (TPS which point out to Just-In-Time (JIT and Kanban as its essence are evidence of restrictive understanding of its real reach and strength. The TPS has the "complete elimination of wastes " as its grounds and JIT and autonomation as its two pillars. Zero Defect Quality Control (ZDQC appears as essential support to the operation of autonomation and Systems working. In this paper it is proposed a model which may portray the above interpretation of TPS. On this purpose, the model proposed by Monden was taken up as a starting point. Nevertheless, it was necessary to introduce significant changes. It is also discussed the nature o@f links among autonomation, ZDCQ and all Systems components.

  8. New LWD tools are just in time to probe for baby elephants

    Energy Technology Data Exchange (ETDEWEB)

    Ghiselin, D.

    1997-04-01

    Development of sophisticated formation evaluation instrumentation for use while drilling has led to a stratification of while-drilling services. Measurements while drilling (MWD) comprises measurements of mechanical parameters like weight-on-bit, mud pressures, torque, vibration, hole angle and direction. Logging while drilling (LWD) describes resistivity, sonic, and radiation logging which rival wireline measurements in accuracy. A critical feature of LWD is the rate that data can be telemetered to the surface. Early tools could only transmit 3 bits per second one way. In the last decade, the data rate has more than tripled. Despite these improvements, LWD tools have the ability to make many more measurements than can be telemetered in real-time. The paper discusses the development of this technology and its applications.

  9. Requirements for drilling and disposal in deep boreholes; Foerutsaettningar foer borrning av och deponering i djupa borrhaal

    Energy Technology Data Exchange (ETDEWEB)

    Oden, Anders [QTOB, Haesselby (Sweden)

    2013-09-15

    In this report experience from drilling at great depth in crystalline rock is compiled based on project descriptions, articles and personal contacts. Rock mechanical effects have been analyzed. The report also describes proposals made by SKB and other agencies regarding the disposal of and closure of deep boreholes. The combination of drilling deep with large diameter in crystalline rocks have mainly occurred in various research projects, such as in the German KTB project. Through these projects and the increased interest in recent years for geothermal energy , today's equipment is expected to be used to drill 5000 m deep holes , with a hole diameter of 445 mm , in crystalline rock. Such holes could be used for the disposal of spent nuclear fuel. With the deposition technique recently described by Sandia National Laboratories in USA, SKB estimates that it might be possible to implement the disposal to 5000 m depth. Considering the actual implementation, drilling and disposal, and the far-reaching requirements on nuclear safety and radiation protection, it is considered an important risk getting stuck with the capsule-string, or part of it, above deposition zone without being able to get it loose. In conclusion, even if the drilling and the deposit would succeed there remains to verify that the drill holes with the deposited canisters meet the initial requirements and is long-term safe.

  10. Project Deep Drilling KLX02 - Phase 2. Methods, scope of activities and results. Summary report

    Energy Technology Data Exchange (ETDEWEB)

    Ekman, L. [GEOSIGMA AB/LE Geokonsult AB, Uppsala (Sweden)

    2001-04-01

    Geoscientific investigations performed by SKB, including those at the Aespoe Hard Rock Laboratory, have so far comprised the bedrock horizon down to about 1000 m. The primary purposes with the c. 1700 m deep, {phi}76 mm, sub vertical core borehole KLX02, drilled during the autumn 1992 at Laxemar, Oskarshamn, was to test core drilling technique at large depths and with a relatively large diameter and to enable geoscientific investigations beyond 1000 m. Drilling of borehole KLX02 was fulfilled very successfully. Results of the drilling commission and the borehole investigations conducted in conjunction with drilling have been reported earlier. The present report provides a summary of the investigations made during a five year period after completion of drilling. Results as well as methods applied are described. A variety of geoscientific investigations to depths exceeding 1600 m were successfully performed. However, the investigations were not entirely problem-free. For example, borehole equipment got stuck in the borehole at several occasions. Special investigations, among them a fracture study, were initiated in order to reveal the mechanisms behind this problem. Different explanations seem possible, e.g. breakouts from the borehole wall, which may be a specific problem related to the stress situation in deep boreholes. The investigation approach for borehole KLX02 followed, in general outline, the SKB model for site investigations, where a number of key issues for site characterization are studied. For each of those, a number of geoscientific parameters are investigated and determined. One important aim is to erect a lithological-structural model of the site, which constitutes the basic requirement for modelling mechanical stability, thermal properties, groundwater flow, groundwater chemistry and transport of solutes. The investigations in borehole KLX02 resulted in a thorough lithological-structural characterization of the rock volume near the borehole. In order

  11. Lithology of the long sediment record recovered by the ICDP Dead Sea Deep Drilling Project (DSDDP)

    Science.gov (United States)

    Neugebauer, Ina; Brauer, Achim; Schwab, Markus J.; Waldmann, Nicolas D.; Enzel, Yehouda; Kitagawa, Hiroyuki; Torfstein, Adi; Frank, Ute; Dulski, Peter; Agnon, Amotz; Ariztegui, Daniel; Ben-Avraham, Zvi; Goldstein, Steven L.; Stein, Mordechai

    2014-10-01

    The sedimentary sections that were deposited from the Holocene Dead Sea and its Pleistocene precursors are excellent archives of the climatic, environmental and seismic history of the Levant region. Yet, most of the previous work has been carried out on sequences of lacustrine sediments exposed at the margins of the present-day Dead Sea, which were deposited only when the lake surface level rose above these terraces (e.g. during the Last Glacial period) and typically are discontinuous due to major lake level variations in the past. Continuous sedimentation can only be expected in the deepest part of the basin and, therefore, a deep drilling has been accomplished in the northern basin of the Dead Sea during winter of 2010-2011 within the Dead Sea Deep Drilling Project (DSDDP) in the framework of the ICDP program. Approximately 720 m of sediment cores have been retrieved from two deep and several short boreholes. The longest profile (5017-1), revealed at a water depth of ˜300 m, reaches 455 m below the lake floor (blf, i.e. to ˜1175 m below global mean sea level) and comprises approximately the last 220-240 ka. The record covers the upper part of the Amora (penultimate glacial), the Last Interglacial Samra, the Last Glacial Lisan and the Holocene Ze'elim Formations and, therewith, two entire glacial-interglacial cycles. Thereby, for the first time, consecutive sediments deposited during the MIS 6/5, 5/4 and 2/1 transitions were recovered from the Dead Sea basin, which are not represented in sediments outcropping on the present-day lake shores. In this paper, we present essential lithological data including continuous magnetic susceptibility and geochemical scanning data and the basic stratigraphy including first chronological data of the long profile (5017-1) from the deep basin. The results presented here (a) focus on the correlation of the deep basin deposits with main on-shore stratigraphic units, thus providing a unique comprehensive stratigraphic framework for

  12. Noble gas residence times of saline waters within crystalline bedrock, Outokumpu Deep Drill Hole, Finland

    Science.gov (United States)

    Kietäväinen, Riikka; Ahonen, Lasse; Kukkonen, Ilmo T.; Niedermann, Samuel; Wiersberg, Thomas

    2014-11-01

    Noble gas residence times of saline groundwaters from the 2516 m deep Outokumpu Deep Drill Hole, located within the Precambrian crystalline bedrock of the Fennoscandian Shield in Finland, are presented. The accumulation of radiogenic (4He, 40Ar) and nucleogenic (21Ne) noble gas isotopes in situ together with the effects of diffusion are considered. Fluid samples were collected from depths between 180 and 2480 m below surface, allowing us to compare the modelled values with the measured concentrations along a vertical depth profile. The results show that while the concentrations in the upper part are likely affected by diffusion, there is no indication of diffusive loss at or below 500 m depth. Furthermore, no mantle derived gases were found unequivocally. Previous studies have shown that distinct vertical variation occurs both in geochemistry and microbial community structuring along the drill hole, indicating stagnant waters with no significant exchange of fluids between different fracture systems or with surface waters. Therefore in situ accumulation is the most plausible model for the determination of noble gas residence times. The results show that the saline groundwaters in Outokumpu are remarkably old, with most of the samples indicating residence times between ∼20 and 50 Ma. Although being first order approximations, the ages of the fluids clearly indicate that their formation must predate more recent events, such as Quaternary glaciations. Isolation within the crust since the Eocene-Miocene epochs has also direct implications to the deep biosphere found at Outokumpu. These ecosystems must have been isolated for a long time and thus very likely rely on energy and carbon sources such as H2 and CO2 from groundwater and adjacent bedrock rather than from the ground surface.

  13. Optimization of Machining Parameters for Minimization of Roundness Error in Deep Hole Drilling using Minimum Quantity Lubricant

    Directory of Open Access Journals (Sweden)

    Kamaruzaman Anis Farhan

    2016-01-01

    Full Text Available This paper presents an experimental investigation of deep hole drilling using CNC milling machine. This experiment investigates the effect of machining parameters which are spindle speed, feed rate and depth of hole using minimum quantity lubricant on the roundness error. The experiment was designed using two level full factorial with four center point. Finally, the machining parameters were optimized in obtaining the minimum value of roundness error. The minimum value of roundness error for deep hole drilling is 0.0266 at the spindle speed is 800 rpm, feed rate is 60 mm/min, depth of hole is 70 mm and minimum quantity lubricant is 30ml/hr.

  14. Exploring the Relationships Between Just-In-Time Technique and Manufacturing Performance: Empirical Evidence From Selected Nigerian Firms

    Directory of Open Access Journals (Sweden)

    Ph. D. John Kolade Obamiro

    2009-12-01

    Full Text Available This study explores the relationship between just-in-time technique and manufacturing performance of some selected Nigerian companies. Just-in time was considered to be an overall organisational phenomenon. Data were obtained through a structured questionnaire from a sample size of 300 knowledgeable employees to test the developed model and formulated hypotheses that cover both just-intime and the supporting infrastructures. Bivariate correlation analysis was used to test the three hypotheses. The results showed that: (1 there was a significant relationship between total quality management (supporting infrastructure and just-in-time practices; (2 Human resources management (supporting infrastructure was positively related to just-in-time practices; (3 there was a positive significant relationship between Just-in-time practices and manufacturing performance. These results demonstrate that justin- time practices can be successfully implemented if certain supporting infrastructures are provided, and also support the notion that just-in-time should be practiced at all levels and departments of the organisation, rather than viewing it strictly for shop floor workers.

  15. Integration of Deep Biosphere Research into the International Continental Scientific Drilling Program

    Directory of Open Access Journals (Sweden)

    Jens Kallmeyer

    2010-10-01

    Full Text Available An international workshop on the Integration of Deep Biosphere Research into the International Continental Scientific Drilling Program (ICDP was held on 27–29 September 2009 in Potsdam. It was organized by the Helmholtz Centre Potsdam GFZ German Research Centrefor Geosciences and the University of Potsdam (Germany. Financial support was provided by ICDP. This workshop brought together the expertise of thirty-three microbiologists, biogeochemists, and geologists from seven countries (Finland, Germany, Japan, New Zealand, Sweden, U.K., U.S.A.. Over the last two decades, microbiological and biogeochemical investigations have demonstrated the occurrence of microbial life widely disseminated within the deep subsurface of the Earth (Fredrickson and Onstott, 1996; Parkes et al., 2000; Pedersen, 2000; Sherwood Lollar et al., 2006. Considering the large subsurface pore space available as a life habitat, it has been estimated that the biomass of the so-called deep biosphere might be equal to or even larger than that of the surface biosphere (Whitman et al., 1998.

  16. Electrochemical Drilling of Deep Small Holes in Titanium Alloys with Pulsating Electrolyte Flow

    Directory of Open Access Journals (Sweden)

    Yongbin Zeng

    2014-06-01

    Full Text Available Inherent characteristics of electrochemical drilling (ECD mean that it is a major solution to the machining of deep small holes in difficult-to-cut materials. The removal of insoluble by-products from the machining gap determines the accuracy of control and limits process capacity. Pulsating electrolyte flow is introduced to enhance the removal rate of insoluble products by reducing the hold-down pressure caused by the electrolyte. Experiments are conducted to optimize a stimulus signal for the pulsation and to investigate the electrolyte pulsation frequency, pulsation amplitude, applied voltage, and electrode feed rate in the machining of deep small holes. The results indicate that optimized pulsating flow is effective in accelerating by-product removal and enhancing machining accuracy and maximum machining depth. With the optimized parameters of 5 Hz in frequency, 0.2 MPa in amplitude, and 0.5 MPa in average pressure, a deep hole was machined in titanium alloys of 20 mm depth and 1.97 mm averaged diameter.

  17. Just-in-Time Compilation-Inspired Methodology for Parallelization of Compute Intensive Java Code

    Directory of Open Access Journals (Sweden)

    GHULAM MUSTAFA

    2017-01-01

    Full Text Available Compute intensive programs generally consume significant fraction of execution time in a small amount of repetitive code. Such repetitive code is commonly known as hotspot code. We observed that compute intensive hotspots often possess exploitable loop level parallelism. A JIT (Just-in-Time compiler profiles a running program to identify its hotspots. Hotspots are then translated into native code, for efficient execution. Using similar approach, we propose a methodology to identify hotspots and exploit their parallelization potential on multicore systems. Proposed methodology selects and parallelizes each DOALL loop that is either contained in a hotspot method or calls a hotspot method. The methodology could be integrated in front-end of a JIT compiler to parallelize sequential code, just before native translation. However, compilation to native code is out of scope of this work. As a case study, we analyze eighteen JGF (Java Grande Forum benchmarks to determine parallelization potential of hotspots. Eight benchmarks demonstrate a speedup of up to 7.6x on an 8-core system

  18. Variable Neighbourhood Search and Mathematical Programming for Just-in-Time Job-Shop Scheduling Problem

    Directory of Open Access Journals (Sweden)

    Sunxin Wang

    2014-01-01

    Full Text Available This paper presents a combination of variable neighbourhood search and mathematical programming to minimize the sum of earliness and tardiness penalty costs of all operations for just-in-time job-shop scheduling problem (JITJSSP. Unlike classical E/T scheduling problem with each job having its earliness or tardiness penalty cost, each operation in this paper has its earliness and tardiness penalties, which are paid if the operation is completed before or after its due date. Our hybrid algorithm combines (i a variable neighbourhood search procedure to explore the huge feasible solution spaces efficiently by alternating the swap and insertion neighbourhood structures and (ii a mathematical programming model to optimize the completion times of the operations for a given solution in each iteration procedure. Additionally, a threshold accepting mechanism is proposed to diversify the local search of variable neighbourhood search. Computational results on the 72 benchmark instances show that our algorithm can obtain the best known solution for 40 problems, and the best known solutions for 33 problems are updated.

  19. HOPE: A Python Just-In-Time compiler for astrophysical computations

    CERN Document Server

    Akeret, Joel; Amara, Adam; Refregier, Alexandre

    2014-01-01

    The Python programming language is becoming increasingly popular for scientific applications due to its simplicity, versatility, and the broad range of its libraries. A drawback of this dynamic language, however, is its low runtime performance which limits its applicability for large simulations and for the analysis of large data sets, as is common in astrophysics and cosmology. While various frameworks have been developed to address this limitation, most focus on covering the complete language set, and either force the user to alter the code or are not able to reach the full speed of an optimised native compiled language. In order to combine the ease of Python and the speed of C++, we developed HOPE, a specialised Python just-in-time (JIT) compiler designed for numerical astrophysical applications. HOPE focuses on a subset of the language and is able to translate Python code into C++ while performing numerical optimisation on mathematical expressions at runtime. To enable the JIT compilation, the user only n...

  20. Interpretive Structural Modeling Of Implementation Enablers For Just In Time In ICPI

    Directory of Open Access Journals (Sweden)

    Nitin Upadhye

    2014-12-01

    Full Text Available Indian Corrugated Packaging Industries (ICPI have built up tough competition among the industries in terms of product cost, quality, product delivery, flexibility, and finally customer’s demand. As their customers, mostly OEMs are asking Just in Time deliveries, ICPI must implement JIT in their system. The term "JIT” as, it denotes a system that utilizes less, in terms of all inputs, to create the same outputs as those created by a traditional mass production system, while contributing increased varieties for the end customer. (Womack et al. 1990 "JIT" focuses on abolishing or reducing Muda (“Muda", the Japanese word for waste and on maximizing or fully utilizing activities that add value from the customer's perspective. There is lack of awareness in identifying the right enablers of JIT implementation. Therefore, this study has tried to find out the enablers from the literature review and expert’s opinions from corrugated packaging industries and developed the relationship matrix to see the driving power and dependence between them. In this study, modeling has been done in order to know the interrelationships between the enablers with the help of Interpretive Structural Modeling and Cross Impact Matrix Multiplication Applied to Classification (MICMAC analysis for the performance of Indian corrugated packaging industries.

  1. Micro-Randomized Trials: An Experimental Design for Developing Just-in-Time Adaptive Interventions

    Science.gov (United States)

    Klasnja, Predrag; Hekler, Eric B.; Shiffman, Saul; Boruvka, Audrey; Almirall, Daniel; Tewari, Ambuj; Murphy, Susan A.

    2015-01-01

    Objective This paper presents an experimental design, the micro-randomized trial, developed to support optimization of just-in-time adaptive interventions (JITAIs). JITAIs are mHealth technologies that aim to deliver the right intervention components at the right times and locations to optimally support individuals’ health behaviors. Micro-randomized trials offer a way to optimize such interventions by enabling modeling of causal effects and time-varying effect moderation for individual intervention components within a JITAI. Methods The paper describes the micro-randomized trial design, enumerates research questions that this experimental design can help answer, and provides an overview of the data analyses that can be used to assess the causal effects of studied intervention components and investigate time-varying moderation of those effects. Results Micro-randomized trials enable causal modeling of proximal effects of the randomized intervention components and assessment of time-varying moderation of those effects. Conclusions Micro-randomized trials can help researchers understand whether their interventions are having intended effects, when and for whom they are effective, and what factors moderate the interventions’ effects, enabling creation of more effective JITAIs. PMID:26651463

  2. Networked Just-in-time Control of a Parallel Mechanism with Pneumatic Linear Drives

    Directory of Open Access Journals (Sweden)

    Takahiro Kosaki

    2014-01-01

    Full Text Available Parallel mechanisms have advantages such as high power, high stiffness, and high precision due to the parallel arrangement of actuators, in comparison with typical serial mechanisms. In the present study, we used pneumatic linear drives to develop a linearly actuated parallel mechanism, in which the actuators fixed on a base enable high degrees of freedom of motion of an end-effector. Using pneumatic linear drives in the realization of such a parallel mechanism leads to lightweight, compact, and low-cost construction. For the parallel mechanism prototype, we construct a control system based on our previously proposed networked Just-In-Time (JIT control strategy, which is based on client-server architecture. In this system, the parallel mechanism is connected to a client computer, and a server computer has a database that stores the control data for all the pneumatic actuators to drive the parallel mechanism. The client online accesses the database, receives data from the server, and feeds control commands to the pneumatic actuators. Experiments were performed to investigate the performance of the developed parallel mechanism system.

  3. A Study on the Enhanced Best Performance Algorithm for the Just-in-Time Scheduling Problem

    Directory of Open Access Journals (Sweden)

    Sivashan Chetty

    2015-01-01

    Full Text Available The Just-In-Time (JIT scheduling problem is an important subject of study. It essentially constitutes the problem of scheduling critical business resources in an attempt to optimize given business objectives. This problem is NP-Hard in nature, hence requiring efficient solution techniques. To solve the JIT scheduling problem presented in this study, a new local search metaheuristic algorithm, namely, the enhanced Best Performance Algorithm (eBPA, is introduced. This is part of the initial study of the algorithm for scheduling problems. The current problem setting is the allocation of a large number of jobs required to be scheduled on multiple and identical machines which run in parallel. The due date of a job is characterized by a window frame of time, rather than a specific point in time. The performance of the eBPA is compared against Tabu Search (TS and Simulated Annealing (SA. SA and TS are well-known local search metaheuristic algorithms. The results show the potential of the eBPA as a metaheuristic algorithm.

  4. A case for 'just in time:' could it be right for your hospital, too?

    Science.gov (United States)

    Scanlin, T

    1997-10-01

    When people complain about the escalating cost of health care, malpractice suits are often blamed. But the reality is that hospitals' biggest problem may lie in the storeroom, rather than the courtroom. According to a recent study, hospitals spend about $83 billion per year on supplies--$11 billion of which could be reduced through more efficient supply chain practices. In fact, one leading consultant was recently quoted as saying the supply chain may be the number one area where hospitals can reduce cost. While these statements may be ambitious, the sad truth is that the healthcare industry has been slower than others to adopt money-saving logistics practices like just-in-time (JIT) and continuous replenishment, as well as supporting technology like bar coding and radio frequency. As a result, it has been missing out on some significant cost advantages. This article takes a look at how St. Luke's-Roosevelt Hospital Center in New York City implemented a customized JIT inventory system, saving more than $3 million per year.

  5. Surface contact stimulates the just-in-time deployment of bacterial adhesins.

    Science.gov (United States)

    Li, Guanglai; Brown, Pamela J B; Tang, Jay X; Xu, Jing; Quardokus, Ellen M; Fuqua, Clay; Brun, Yves V

    2012-01-01

    The attachment of bacteria to surfaces provides advantages such as increasing nutrient access and resistance to environmental stress. Attachment begins with a reversible phase, often mediated by surface structures such as flagella and pili, followed by a transition to irreversible attachment, typically mediated by polysaccharides. Here we show that the interplay between pili and flagellum rotation stimulates the rapid transition between reversible and polysaccharide-mediated irreversible attachment. We found that reversible attachment of Caulobacter crescentus cells is mediated by motile cells bearing pili and that their contact with a surface results in the rapid pili-dependent arrest of flagellum rotation and concurrent stimulation of polar holdfast adhesive polysaccharide. Similar stimulation of polar adhesin production by surface contact occurs in Asticcacaulis biprosthecum and Agrobacterium tumefaciens. Therefore, single bacterial cells respond to their initial contact with surfaces by triggering just-in-time adhesin production. This mechanism restricts stable attachment to intimate surface interactions, thereby maximizing surface attachment, discouraging non-productive self-adherence, and preventing curing of the adhesive.

  6. Enhanced just-in-time plus protocol for optical burst switching networks

    Science.gov (United States)

    Rodrigues, Joel J. P. C.; Gregório, José M. B.; Vasilakos, Athanasios V.

    2010-07-01

    We propose a new one-way resource reservation protocol for optical burst switching (OBS) networks, called Enhanced Just-in-Time Plus (E-JIT+). The protocol is described in detail, and its formal specification is presented, following an extended finite state machine approach. The performance evaluation of E-JIT+ is analyzed in comparison with other proposed OBS protocols (JIT+ and E-JIT) for the following network topologies: rings; degree-two, degree-three, and degree-four chordal rings; mesh-torus; NSFNET; ARPANET; FCCN-NET; and the European Optical Network. We evaluate and compare the performance of the different protocols in terms of burst loss probability, taking into account the most important OBS network parameters. It was shown that E-JIT+ performs better than available one-way resource reservation protocols for all the evaluated network topologies. Moreover, the scalability of E-JIT+ was observed, and when the network traffic increases, the burst loss probability also increases, leading to a worse network performance.

  7. Effectiveness of three just-in-time training modalities for N-95 mask fit testing.

    Science.gov (United States)

    Jones, David; Stoler, Genevieve; Suyama, Joe

    2013-01-01

    To compare and contrast three different training modalities for fit testing N-95 respirator face masks. Block randomized interventional study. Urban university. Two hundred eighty-nine medical students. Students were randomly assigned to video, lecture, or slide show to evaluate the effectiveness of the methods for fit testing large groups of people. Ease of fit and success of fit for each instructional technique. Mask 1 was a Kimberly-Clark duckbill N-95 respirator mask, and mask 2 was a 3M™ carpenters N-95 respirator mask. "Ease of fit" was defined as the ability to successfully don a mask in less than 30 seconds. "Success of fit" was defined as the ability to correctly don a mask in one try. There were no statistical differences by training modality for either mask regarding ease of fit or success of fit. There were no differences among video presentation, small group demonstration, and self-directed slide show just-in-time training modalities for ease of fit or success of fit N-95 respirator mask fitting. Further study is needed to explore more effective fit training modalities.

  8. Wireless just-in-time training of mobile skilled support personnel

    Science.gov (United States)

    Bandera, Cesar; Marsico, Michael; Rosen, Mitchel; Schlegel, Barry

    2006-05-01

    Skilled Support Personnel (SSP) serve emergency response organizations during an emergency incident, and include laborers, operating engineers, carpenters, ironworkers, sanitation workers and utility workers. SSP called to an emergency incident rarely have recent detailed training on the chemical, biological, radiological, nuclear and/or explosives (CBRNE) agents or the personal protection equipment (PPE) relevant to the incident. This increases personal risk to the SSP and mission risk at the incident site. Training for SSP has been identified as a critical need by the National Institute for Environmental Health Sciences, Worker Education and Training Program. We present a system being developed to address this SSP training shortfall by exploiting a new training paradigm called just-in-time training (JITT) made possible by advances in distance learning and cellular telephony. In addition to the current conventional training at regularly scheduled instructional events, SSP called to an emergency incident will have secure access to short (graphics, animation, and assessment designed for the user interface of most current cell phones. Engineering challenges include compatibility with current cell phone technologies and wireless service providers, integration with the incident management system, and SCORM compliance.

  9. Using Deep-Sea Scientific Drilling to Enhance Ocean Science Literacy

    Science.gov (United States)

    Passow, Michael; Cooper, Sharon; Kurtz, Nicole; Burgio, Marion; Cicconi, Alessia

    2017-04-01

    Beginning with confirmation of sea floor spreading in Leg 3 of the Deep Sea Drilling Project in 1968, scientific ocean drilling has provided much of the evidence supporting modern understanding of the Earth System, global climate changes, and many other important concepts. But for more than three decades, results of discoveries were published primarily in scientific journals and cruise volumes. On occasion, science journalists would write articles for the general public, but organized educational outreach efforts were rare. Starting about a decade ago, educators were included in the scientific party aboard the JOIDES Resolution. These "teachers-at-sea" developed formats to translate the technical and scientific activities into language understandable to students, teachers, and the public. Several "Schools of Rock" have enabled groups of teachers and informal science educators to experience what happens aboard the JOIDES Resolution. Over the past few years, educational outreach efforts based on scientific drilling expanded to create a large body of resources that promote Ocean Science Literacy. Partnerships between scientists and educators have produced a searchable database of inquiry-centered classroom and informal science activities. These are available for free through the JOIDES Resolution website, joidesresolution.org. Activities are aligned with the Ocean Literacy Principles (http://oceanliteracy.wp2.coexploration.org/) and Science Education Standards. In addition to a suite of lessons based on the science behind scientific drilling, participants have developed a range of educational resources that include graphic novels ("Tales of the Resolution" (http://joidesresolution.org/node/263) ; children's books ("Uncovering Earth's Secrets" and "Where the Wild Microbes Grow" http://joidesresolution.org/node/2998); posters, videos, and other materials. Cooper and Kurtz are currently overseeing improvements and revisions to the JR education website pages. The

  10. Mechanism and elimination of bending effect in femtosecond laser deep-hole drilling.

    Science.gov (United States)

    Xia, Bo; Jiang, Lan; Li, Xiaowei; Yan, Xueliang; Lu, Yongfeng

    2015-10-19

    In this work, a comprehensive study of the bending effect, which remains one of the most critical challenges during deep-hole drilling, was conducted. The experimental statistics indicate that polarization is not the main factor in bending, but the deviation of the hole tends to be perpendicular to the polarization direction. Also, the dynamic ablated material/plasma was studied. Straight microholes were obtained by extending the interval between laser pulses to avoid dynamic ablated material existing in the millisecond time domain. Therefore, we speculated that the disturbance of the laser beam at the dynamic ablated aerosol, which have not sufficiently dispersed in the millisecond domain, is the main mechanism of bending. However, to more efficiently reduce the disturbance factor, a rough vacuum environment was applied; and the bending effect was also eliminated. The critical pressure for eliminating bending was about 2 × 10(4) Pa that is about one order of magnitude lower than the atmosphere. The fabricated high-quality microhole arrays without bending show that the proposed drilling method is convenient and efficient with high repeatability and controllability.

  11. Carbon chemistry of the Apollo 15 and 16 deep drill cores

    Science.gov (United States)

    Wszolek, P. C.; Burlingame, A. L.

    1973-01-01

    The carbon chemistry of the Apollo 15 and 16 deep drill cores is a function of the surface exposure plus the chemical and mineralogical composition of the individual samples. The depth profiles of carbide and methane yields in the Apollo 15 core show a general decline with depth and correlate with the solar wind noble gas content, percentage agglutinates, track densities, and metallic iron. All horizons examined were exposed for a considerable time on the lunar surface. The Apollo 16 core samples show that chemical and mineralogical composition plays an important role in determining the nature of carbide-like material present in the fines. The higher aluminum and calcium contents and lower iron contents of highlands material result in carbide-like material yielding less CD4 and more C2D2 (deuteroacetylene) upon DF acid dissolution.

  12. Present-day stress state in the Outokumpu deep drill hole, Finland

    Science.gov (United States)

    Pierdominici, Simona; Ask, Maria; Kukkonen, Ilmo; Kueck, Jochem

    2017-04-01

    This study aims to investigate the present-day stress field in the Outokumpu area, eastern Finland, using interpretation of borehole failure on acoustic image logs in a 2516 m deep hole. Two main objectives of this study are: i. to constrain the orientation of maximum horizontal stress by mapping the occurrence of stress-induced deformation features using two sets of borehole televiewer data, which were collected in 2006 and 2011; and ii. to investigate whether any time dependent deformation of the borehole wall has occurred (creep). The Outokumpu deep hole was drilled during 2004-2005 to study deep structures and seismic reflectors within the Outokumpu formation and conducted within the International Continental Scientific Drilling Program (ICDP). The hole was continuously core-drilled into Paleoproterozoic formation of metasediments, ophiolite-derived altered ultrabasic rocks and pegmatitic granite. In 2006 and 2011 two downhole logging campaigns were performed by the Operational Support Group of ICDP to acquire a set of geophysical data. Here we focus on a specific downhole logging measurement, the acoustic borehole televiewer (BHTV), to determine the present-day stress field in the Outokumpu area. We constrain the orientation and magnitude of in situ stress tensor based on borehole wall failures detected along a 2516 m deep hole. Horizontal stress orientation was determined by interpreting borehole breakouts (BBs) and drilling-induced tensile fractures (DIFs) from BHTV logs. BBs are stress-induced enlargements of the borehole cross section and occur in two opposite zones at angles around the borehole where the wellbore stress concentration (hoop stress) exceeds the value required to cause compressive failure of intact rock. DIFs are caused by tensile failure of the borehole wall and form at two opposite spots on the borehole where the stress concentration is lower than the tensile strength of the rock. This occurs at angles 90° apart from the center of the

  13. Experimental study to analyse the workpiece surface temperature in deep hole drilling of aluminium alloy engine blocks using MQL technology

    Directory of Open Access Journals (Sweden)

    A.J. Filipovic

    2008-12-01

    Full Text Available Purpose: The objective of this applied research is to investigate the MQL deep hole drilling method, in orderto increase productivity and replace the current method of drilling main oil gallery holes in aluminum alloycylinder blocks that uses MWFs.Design/methodology/approach: The experimentation was performed at the Guhring, Inc. (a tool manufacturingcompany in Germany. The MQL drilling machine, machine operators, CNC programming, hole drilling, andtool layouts were be provided by Guhring. The main components of this experiment were the MQL machinewith dual channel system, machine tool fixture, special carbide drills, data acquisition system, thermal opticalcamera to measure surface temperature, and computers. The surface along the axis of the of the oil gallery holewas milled to produce uniform thickness of 2.5 mm. The drill was spinning but not moving into the engineblock, the engine block was moving into the drill. All experiments were performed in random order with noreplications. The other output variables, surface finish, true position, roundness, straightness, diameter andmisalignment, were measured by a surface analyzer and coordinate measuring machine (CMM.Findings: Based on this research it can be concluded that MQL is a viable production solution for DHDin automotive cast aluminum alloy. Good part quality characteristics were achieved using this method withproduction feeds and speeds.Practical implications: The MQL method has shown potential to be even more productive as compared totraditional deep hole drilling which would result in less capital investment.Originality/value: Good part quality characteristics were achieved using this method with production feeds and speeds.

  14. Deep Drilling Into the Chicxulub Impact Crater: Pemex Oil Exploration Boreholes Revisited

    Science.gov (United States)

    Fucugauchi, J. U.; Perez-Cruz, L.

    2007-05-01

    The Chicxulub structure was recognized in the 1940´s from gravity anomalies in oil exploration surveys by Pemex. Geophysical anomalies occur over the carbonate platform in NW Yucatan, where density and magnetic susceptibility contrasts with the carbonates suggested a buried igneous complex or basement uplift. The exploration program developed afterwards included several boreholes, starting with the Chicxulub-1 in 1952 and eventually comprising eight deep boreholes completed through the 1970s. The investigations showing Chicxulub as a large impact crater formed at the K/T boundary have relayed on the Pemex decades-long exploration program. Despite frequent reference to Pemex information, original data have not been openly available for detailed evaluation and incorporation with results from recent efforts. Logging data and core samples remain to be analyzed, reevaluated and integrated in the context of recent marine, aerial and terrestrial geophysical surveys and the drilling/coring projects of UNAM and ICDP. In this presentation we discuss the paleontological data, stratigraphic columns and geophysical logs for the Chicxulub-1 (1582m), Sacapuc-1 (1530m), Yucatan-6 (1631m) and Ticul-1 (3575m) boreholes. These boreholes remain the deepest ones drilled in Chicxulub and the only ones providing samples of the melt-rich breccias and melt sheet. Other boreholes include the Y1 (3221m), Y2 (3474m), Y4 (2398m) and Y5A (3003m), which give information on pre-impact stratigraphy and crystalline basement. We concentrate on log and microfossil data, stratigraphic columns, lateral correlation, integration with UNAM and ICDP borehole data, and analyses of sections of melt, impact breccias and basal Paleocene carbonates. Current plans for deep drilling in Chicxulub crater focus in the peak ring zone and central sector, with proposed marine and on-land boreholes to the IODP and ICDP programs. Future ICDP borehole will be located close to Chicxulub-1 and Sacapuc-1, which intersected

  15. Autonomic Middleware Services for Just-In-Time Grid Services Provisioning

    Directory of Open Access Journals (Sweden)

    Wail M. Omar

    2006-01-01

    Full Text Available The advent of widespread distributed computing environment, such as information systems and computational grids computing has enabled a new generation of applications that are based on seamless access, aggregation and interaction. The dramatic side of the story is a strong presence of the plea that those decentralized Grids are potentially affected by a number of primitives derived from their anatomy, in that, they are inherently large, complex, heterogeneous and dynamic, globally aggregating a large number of independent computing and communication resources. This has clearly exposed an essential exigency for a vital change to how these applications are developed and managed, which has motivated researchers to consider other techniques used by biological systems to deal with such problems. This is referred to as autonomic computing, which is defined by Ganek and Corbi[1] “… as a collection and integration of technologies that enable the creation of an information technology computing infrastructure for the next era of computing—e-business on demand …”. This study presents a computational model to support just-in-time and on-demand services for autonomic computing. Service reservation and job schedule systems are employed in this model to estimate the required services in advanced. Intelligent classification is utilized to cluster consumers into groups sharing the same behaviour and hence offer the required services for each consumer in advance, according to the group’s usage pattern of application services. To this end, a machine learning middleware service based on Self-Organizing Maps (SOM is designed, developed and implemented to carry out the intelligent classification for the autonomic computing. A case-study scenario of intelligent connected homes is demonstrated in this study to show the usability of such system.

  16. HOPE: A Python just-in-time compiler for astrophysical computations

    Science.gov (United States)

    Akeret, J.; Gamper, L.; Amara, A.; Refregier, A.

    2015-04-01

    The Python programming language is becoming increasingly popular for scientific applications due to its simplicity, versatility, and the broad range of its libraries. A drawback of this dynamic language, however, is its low runtime performance which limits its applicability for large simulations and for the analysis of large data sets, as is common in astrophysics and cosmology. While various frameworks have been developed to address this limitation, most focus on covering the complete language set, and either force the user to alter the code or are not able to reach the full speed of an optimised native compiled language. In order to combine the ease of Python and the speed of C++, we developed HOPE, a specialised Python just-in-time (JIT) compiler designed for numerical astrophysical applications. HOPE focuses on a subset of the language and is able to translate Python code into C++ while performing numerical optimisation on mathematical expressions at runtime. To enable the JIT compilation, the user only needs to add a decorator to the function definition. We assess the performance of HOPE by performing a series of benchmarks and compare its execution speed with that of plain Python, C++ and the other existing frameworks. We find that HOPE improves the performance compared to plain Python by a factor of 2 to 120, achieves speeds comparable to that of C++, and often exceeds the speed of the existing solutions. We discuss the differences between HOPE and the other frameworks, as well as future extensions of its capabilities. The fully documented HOPE package is available at http://hope.phys.ethz.ch and is published under the GPLv3 license on PyPI and GitHub.

  17. Utilization of Just-in-time Training for Nursing Education using the LA Phonospirometry Asthma Tool.

    Science.gov (United States)

    Pade, Kathryn H; Seik-Ismail, Sophia T; Chang, Todd P; Wang, Vincent J

    2017-08-28

    Just-in-time training (JITT) has been used to teach and re-teach known medical techniques, but has not been used to teach novel techniques. We aimed to assess the performance retention of JITT on a novel asthma exacerbation severity assessment technique known as Los Angeles (LA) Phonospirometry. This was a prospective cohort study using a convenience sample of pediatric emergency department registered nurses (RNs) who were asked to watch a brief instructional digital video on LA Phonospirometry, and then asked to practice the technique on a research assistant (RA). A checklist was used to evaluate proficiency with the primary outcome being the number correct on the checklist. The secondary outcome included whether or not they could identify a common error demonstrated by the RA. RNs were re-tested after 4-6 months to assess skill retention. Forty RNs were enrolled in the study and 6 were lost to follow-up. The mean time from the first to second testing was 5.4 months +/- 0.5 months. The mean score of the first part of the checklist on the initial testing was 4.6 +/- 0.7 and on second testing was 3.8 +/- 1.5 (p = 0.008). This represented a drop in scores and thus minimal knowledge decay of 18% (from 91% to 73%). The mean for number of errors picked up for the first test and second test were 1.3 and 1.5, respectively (p = 0.2). JITT demonstrated feasibility as a rapid instructional tool for RNs, with a limited decay in cognitive knowledge surrounding the LA Phonospirometry technique.

  18. The Deep Subsurface Microbiology Research in China: Results from Chinese Continental Scientific Drilling Project

    Science.gov (United States)

    Dong, H.; Zhang, G.; Huang, L.; Dai, X.; Wang, Y.; Lu, G.; Dong, Z.; Dong, X.

    2009-12-01

    Microbial abundance and community structure from ultra-high pressure metamorphic rocks and deep fluids from the Chinese Continental Scientific Drilling (CCSD) project were investigated by using geochemical and cultivation and molecular microbiology methods. The drilling site is located in the eastern part of the Dabie-Sulu ultra high-pressure metamorphic (UHPM) orogenic belt at the convergent plate boundary between the Sino-Korean and Yangtze Plates. This integrated approach conclusively demonstrates that microbes can survive in the deep continental subsurface (down to ~4500 m) and they play important roles in biogeochemical transformations of minerals and rocks. Direct cell counting and phospholipid fatty acid analysis identified microbial life in rock samples taken from as deep as ~4500 m, where the temperature was estimated to be approximately 130oC. The subsurface distribution of microorganisms was continuous and the abundance of microbial cells was unrelated to the depth. However, analysis of 16S rDNA sequences derived from the rock DNA samples by PCR showed that the diversity of microorganisms decreased with increasing depth. The bacterial clone sequences shifted from a Proteobacteria-dominated community to a Firmicutes-dominated one with increased depth. From the ground surface to 2030 m, most clone sequences were related to nitrate reducers, with a saline, alkaline, and cold habitat. From 2290 to ~4500 m most clone sequences were closely related to anaerobic, thermophilic, halophilic or alkaliphilic bacteria. The archaeal diversity was low. Most archaeal sequences were not related to any known cultivated species, but to environmental clone sequences recovered from subsurface marine environments. A number of enrichments and isolates were obtained from the rocks and fluids, including thermophilic metal reducers and alkaliphiles. Thermophilic iron-reducing bacteria were incubated with lactate as the electron donor and structural Fe(III) in solid minerals as

  19. The Hybrid Design: Integrating the Human and Technical Components of Just-In-Time Knowledge Management Systems

    Directory of Open Access Journals (Sweden)

    Nabie Y. Conteh

    2011-06-01

    Full Text Available This paper explores the right balance of human and technical resources in the design of Just-in-Time knowledge delivery. It also examines and analyzes the case study: “Teltech: The business of Knowledge Management” by Davenport. It further attempts to depict the characteristics of the hybrid. The paper describes how the hybrid can be applied to Just-In-Time knowledge delivery. It also seeks to analyze and explore its interplay with knowledge splits with a view to designing Just-In- Time Knowledge Management. These include: “tacit versus explicit knowledge”, “in-process” versus “after action” documentation, “process-centered versus product-centered approach”, “knowledge versus information” and the “culture of sharing versus hoarding.”

  20. Applied technology in the solution of geothermal drilling problems of deep wells in La Primavera caldera (Mexico)

    Science.gov (United States)

    Santoyo-Gutiérrez, S.; García, A.; Morales, M.; Perezyera, J.; Rosas, A.

    1991-07-01

    The drilling of deep wells in the La Primavera caldera has evidenced a highly complex and hazardous problematic situation due to considerable losses of drilling fluids. Such large losses have not occurred in any other geothermal field in the world. These losses are due mainly to the structural conditions of the geological formations which are penetrated. The technology employed in the construction of deep wells has played a very important role in the solution to these problems. Field case histories describe the effectiveness of the developments of drilling fluids and cement materials in cavernous formations with severe lost-circulation problems. A processed clay bentonite was developed whose high performance and rapid hydration characteristics allowed a reduction of up to 5 hours in the drilling fluid conditioning time. Also, useful results were obtained through the development of a granular plugging mixture which maintained sealing properties at 70 kg/cm 2 under cavernous simulated conditions. This granular plugging mixture kept losses of the volume of drilling fluid under 8% with respect to the total volume. Special cement plugs with thixotropic behavior allowed the handling and placement of this slurry in the problematic zone. The CaSO 4 addition to the cement slurry was optimized so that a placement time of 30 min could be obtained. Additionally, the mechanical compressive strength values of this special cement plug ranged from 50 to 100 kg/cm 2.

  1. Just-in-time information improved decision-making in primary care: a randomized controlled trial.

    Directory of Open Access Journals (Sweden)

    Jessie McGowan

    Full Text Available BACKGROUND: The "Just-in-time Information" (JIT librarian consultation service was designed to provide rapid information to answer primary care clinical questions during patient hours. This study evaluated whether information provided by librarians to answer clinical questions positively impacted time, decision-making, cost savings and satisfaction. METHODS AND FINDING: A randomized controlled trial (RCT was conducted between October 2005 and April 2006. A total of 1,889 questions were sent to the service by 88 participants. The object of the randomization was a clinical question. Each participant had clinical questions randomly allocated to both intervention (librarian information and control (no librarian information groups. Participants were trained to send clinical questions via a hand-held device. The impact of the information provided by the service (or not provided by the service, additional resources and time required for both groups was assessed using a survey sent 24 hours after a question was submitted. The average time for JIT librarians to respond to all questions was 13.68 minutes/question (95% CI, 13.38 to 13.98. The average time for participants to respond their control questions was 20.29 minutes/question (95% CI, 18.72 to 21.86. Using an impact assessment scale rating cognitive impact, participants rated 62.9% of information provided to intervention group questions as having a highly positive cognitive impact. They rated 14.8% of their own answers to control question as having a highly positive cognitive impact, 44.9% has having a negative cognitive impact, and 24.8% with no cognitive impact at all. In an exit survey measuring satisfaction, 86% (62/72 responses of participants scored the service as having a positive impact on care and 72% (52/72 indicated that they would use the service frequently if it were continued. CONCLUSIONS: In this study, providing timely information to clinical questions had a highly positive impact on

  2. Just-in-Time Teaching in undergraduate physics courses: Implementation, learning, and perceptions

    Science.gov (United States)

    Dwyer, Jessica Hewitt

    Regardless of discipline, a decades-long battle has ensued within nearly every classroom in higher education: instructors getting students to come to class prepared to learn. In response to this clash between teacher expectations and frequent student neglect, a group of four physics education researchers developed a reformed instructional strategy called Just-in-Time Teaching (JiTT). This dissertation investigates the following three areas: 1) the fidelity with which undergraduate physics instructors implement JiTT, 2) whether student performance predicts student perception of their instructor's fidelity of JiTT implementation, and 3) whether student perception of their instructor's fidelity of JiTT implementation correlates with student views of their physics course. A blend of quantitative data (e.g., students grades, inventory scores, and questionnaire responses) are integrated with qualitative data (e.g., individual faculty interviews, student focus group discussions, and classroom observations). This study revealed no statistically significant relationship between instructors who spent time on a predefined JiTT critical component and their designation as a JiTT user or non-user. While JiTT users implemented the pedagogy in accordance with the creators' intended ideal vision, many also had trouble reconciling personal concerns about their role as a JiTT adopter and the anticipated demand of the innovation. I recommend that this population of faculty members can serve as a JiTT model for other courses, disciplines, and/or institutions. Student performance was not a predictor of student perception instructor fidelity of JiTT implementation. Additionally, the majority of students in this study reported they read their textbook prior to class and that JiTT assignments helped them prepare for in-class learning. I found evidence that exposure to the JiTT strategy may correlate with a more favorable student view of their physics course. Finally, according to students

  3. Bacteria Community in the Terrestrial Deep Subsurface Microbiology Research of the Chinese Continent Scientific Drilling

    Science.gov (United States)

    Wang, Y.; Xia, Y.; Dong, H.; Dong, X.; Yang, K.; Dong, Z.; Huang, L.

    2005-12-01

    Microbial communities in the deep drill cores from the Chinese Continent Scientific Drilling were analyzed with culture-independent and dependent techniques. Genomic DNA was extracted from two metamorphic rocks: S1 from 430 and S13 from 1033 meters below the ground surface. The 16S rRNA gene was amplified by polymerase chain reaction (PCR) followed by cloning and sequencing. The total cell number was counted using the 4',6-diamidino-2-phenylindole (DAPI) staining and biomass of two specific bacteria were quantified using real-time PCR. Enrichment was set up for a rock from 3911 meters below the surface in medium for authotrophic methanogens (i.e., CO2 + H2). The total cell number in S13 was 1.0 × 104 cells per gram of rock. 16S rRNA gene analysis indicated that low G + C Gram positive sequences were dominant (50 percent of all 54 clone sequenced) followed by the alpha-, beta, and gamma-Proteobacteria. Within the low G + C Gram positive bacteria, most clone sequences were similar to species of Bacillus from various natural environments (deserts, rivers etc.). Within the Proteobacteria, our clone sequences were similar to species of Acinetobacter, Acidovorax, and Aeromonas. The RT-RCP results showed that biomass of two particular clone sequences (CCSD1305, similar to Aeromonas caviae and CCSD1307, similar to Acidovorax facilis) was 95 and 1258 cells/g, respectively. A bacterial isolate was obtained from the 3911-m rock in methanogenic medium. It was Gram negative with no flagella, immobile, and facultative anaerobic, and grows optimally at 65oC. Phylogenetic analysis indicated that it was closely related to the genus of Bacillus. Physiological tests further revealed that it was a strain of Bacillus caldotenax.

  4. Assessing the deep drilling potential of Lago de Tota, Colombia, with a seismic survey

    Science.gov (United States)

    Bird, B. W.; Wattrus, N. J.; Fonseca, H.; Velasco, F.; Escobar, J.

    2015-12-01

    Reconciling orbital-scale patterns of inter-hemispheric South American climate during the Quaternary requires continuous, high-resolution paleoclimate records that span multiple glacial cycles from both hemispheres. Southern Andean Quaternary climates are represented by multi-proxy results from Lake Titicaca (Peru-Bolivia) spanning the last 400 ka and by pending results from the Lago Junin Drilling Project (Peru). Although Northern Andean sediment records spanning the last few million years have been retrieved from the Bogota and Fúquene Basins in the Eastern Cordillera of the Colombian Andes, climatic reconstructions based on these cores have thus far been limited to pollen-based investigations. When viewed together with the Southern Hemisphere results, these records suggest an anti-phased hemispheric climatic response during glacial cycles. In order to better assess orbital-scale climate responses, however, independent temperature and hydroclimate proxies from the Northern Hemisphere are needed in addition to vegetation histories. As part of this objective, an effort is underway to develop a paleoclimate record from Lago de Tota (3030 m asl), the largest lake in Colombia and the third largest lake in the Andes. One of 17 highland tectonic basins in Eastern Cordillera, Lago de Tota formed during Tertiary uplift that deformed pre-foreland megasequences, synrift and back-arc megasequences. The precise age and thickness of sediments in the Lago de Tota basin has not previously been established. Here, we present results from a recent single-channel seismic reflection survey collected with a small (5 cubic inch) air gun and high-resolution CHIRP sub-bottom data. With these data, we examine the depositional history and sequence stratigraphy of Lago de Tota and assess its potential as a deep drilling target.

  5. Campi Flegrei Deep Drilling Project and geothermal activities in Campania Region (Southern Italy)

    Science.gov (United States)

    De Natale, Giuseppe; Troise, Claudia; Troiano, Antonio; Giulia Di Giuseppe, Maria; Mormone, Angela; Carlino, Stefano; Somma, Renato; Tramelli, Anna; Vertechi, Enrico; Sangianantoni, Agata; Piochi, Monica

    2013-04-01

    The Campanian volcanic area has a huge geothermal potential (Carlino et al., 2012), similar to the Larderello-Radicondoli-Amiata region, in Tuscany (Italy), which has been the first site in the World exploited for electric production. Recently, the Campi Flegrei Deep Drilling Project (CFDDP), sponsored by ICDP and devoted to understand and mitigate the extreme volcanic risk in the area, has also risen new interest for geothermal exploration in several areas of Italy. Following the new Italian regulations which favour and incentivise innovative pilot power plants with zero emission, several geothermal projects have started in the Campania Region, characterized by strict cooperation among large to small industries, Universities and public Research Centers. INGV department of Naples (Osservatorio Vesuviano) has the technical/scientific leadership of such initiatives. Most of such projects are coordinated in the framework of the Regional District for Energy, in which a large part is represented by geothermal resource. Leading geothermal projects in the area include 'FORIO' pilot plant project, aimed to build two small (5 MWe each one) power plants in the Ischia island and two projects aimed to build pilot power plants in the Agnano-Fuorigrotta area in the city of Naples, at the easternmost part of Campi Flegrei caldera. One of the Campi Flegrei projects, 'SCARFOGLIO', is aimed to build a 5 MWe geothermal power plant in the Agnano area, whereas the 'START' project has the goal to build a tri-generation power plant in the Fuorigrotta area, fed mainly by geothermal source improved by solar termodynamic and bio-mass. Meanwhile such projects enter the field work operational phase, the pilot hole drilling of the CFDDP project, recently completed, represents an important experience for several operational aspects, which should contitute an example to be followed by the next geothermal activities in the area. It has been furthermore a source of valuable data for geothermal

  6. Stratigraphy, climate and downhole logging data - an example from the ICDP Dead Sea deep drilling project

    Science.gov (United States)

    Coianiz, Lisa; Ben-Avraham, Zvi; Lazar, Michael

    2017-04-01

    During the late Quaternary a series of lakes occupied the Dead Sea tectonic basin. The sediments that accumulated within these lakes preserved the environmental history (tectonic and climatic) of the basin and its vicinity. Most of the information on these lakes was deduced from exposures along the marginal terraces of the modern Dead Sea, e.g. the exposures of the last glacial Lake Lisan and Holocene Dead Sea. The International Continental Drilling Program (ICDP) project conducted in the Dead Sea during 2010-2011 recovered several cores that were drilled in the deep depocenter of the lake (water depth of 300 m) and at the margin (depth of 3 m offshore Ein Gedi spa). New high resolution logging data combined with a detailed lithological description and published age models for the deep 5017-1-A borehole were used to establish a sequence stratigraphic framework for the Lakes Amora, Samra, Lisan and Zeelim strata. This study presents a stratigraphic timescale for reconstructing the last ca 225 ka. It provides a context within which the timing of key sequence surfaces identified in the distal part of the basin can be mapped on a regional and stratigraphic time frame. In addition, it permitted the examination of depositional system tracts and related driving mechanisms controlling their formation. The sequence stratigraphic model developed for the Northern Dead Sea Basin is based on the identification of sequence bounding surfaces including: sequence boundary (SB), transgressive surface (TS) and maximum flooding surface (MFS). They enabled the division of depositional sequences into a Lowstand systems tracts (LST), Transgressive systems tracts (TST) and Highstand systems tracts (HST), which can be interpreted in terms of relative lake level changes. The analysis presented here show that system tract stacking patterns defined for the distal 5017-1-A borehole can be correlated to the proximal part of the basin, and widely support the claim that changes in relative lake

  7. Tech Select Decision Aide: A Mobile Application to Facilitate Just-in-Time Decision Support for Instructional Designers

    Science.gov (United States)

    Dabbagh, Nada; Fake, Helen

    2017-01-01

    With the ubiquitous use of mobile technologies and the increasing demand for just-in-time training, there is a need to prepare and support instructional designers and educators to meet the pedagogical and technological development requirements of their target audience in the most effective and efficient way. This paper reviews the iterative…

  8. The Effect of Inquiry Training Learning Model Based on Just in Time Teaching for Problem Solving Skill

    Science.gov (United States)

    Turnip, Betty; Wahyuni, Ida; Tanjung, Yul Ifda

    2016-01-01

    One of the factors that can support successful learning activity is the use of learning models according to the objectives to be achieved. This study aimed to analyze the differences in problem-solving ability Physics student learning model Inquiry Training based on Just In Time Teaching [JITT] and conventional learning taught by cooperative model…

  9. Case Study Evaluating Just-In-Time Teaching and Peer Instruction Using Clickers in a Quantum Mechanics Course

    Science.gov (United States)

    Sayer, Ryan; Marshman, Emily; Singh, Chandralekha

    2016-01-01

    Just-in-Time Teaching (JiTT) is an instructional strategy involving feedback from students on prelecture activities in order to design in-class activities to build on the continuing feedback from students. We investigate the effectiveness of a JiTT approach, which included in-class concept tests using clickers in an upper-division quantum…

  10. Enhancing Student Engagement and Active Learning through Just-in-Time Teaching and the Use of Powerpoint

    Science.gov (United States)

    Wanner, Thomas

    2015-01-01

    This instructional article is about an innovative teaching approach for enhancing student engagement and active learning in higher education through a combination of just-in-time teaching and the use of PowerPoint technology. The central component of this approach was students' pre-lecture preparation of a short PowerPoint presentation in which…

  11. Case Study Evaluating Just-In-Time Teaching and Peer Instruction Using Clickers in a Quantum Mechanics Course

    Science.gov (United States)

    Sayer, Ryan; Marshman, Emily; Singh, Chandralekha

    2016-01-01

    Just-in-Time Teaching (JiTT) is an instructional strategy involving feedback from students on prelecture activities in order to design in-class activities to build on the continuing feedback from students. We investigate the effectiveness of a JiTT approach, which included in-class concept tests using clickers in an upper-division quantum…

  12. The Iceland Deep Drilling Project, a 5 km Deep Drillhole Underway to Investigate Deep Geothermal Resources on the Mid-Atlantic Ridge.

    Science.gov (United States)

    Elders, W. A.; Fridleifsson, G. O.; Bird, D. K.; Pope, E. C.; Freedman, A. J.; Schiffmann, P.; Zierenberg, R. A.; Reed, M. H.; Palandri, J.

    2005-12-01

    The Iceland Deep Drilling Project (IDDP) is a long-term study of high-temperature hydrothermal systems on the Reykjanes Peninsula, where the Mid-Atlantic Ridge emerges on to the SW tip of Iceland. The IDDP is a collaborative effort, by a consortium of Icelandic power companies and the Icelandic government, to investigate if utilizing supercritical geothermal fluids would improve the economics of power production from geothermal fields. Over the next decade this will involve drilling a series of wells >4 km deep, to reach temperatures ~450°C. The deepest of these wells so far was completed at 3.1 km in February 2005. The rocks penetrated consist of Holocene basaltic lavas, subglacial hyaloclastites, marine sediments, submarine pillow basalts, and diabase dikes. In 2006, the IDDP will rotary drill and spot core this, or another candidate well, to 4.0 km, and in 2007, the IDDP will deepen the borehole from 4.0 km to 5.0 km, using continuous wireline coring. Such deep, hot wells present both technical challenges and opportunities for important scientific studies. For example, preliminary analyses of rock samples and fluids from the existing geothermal wells indicate that the shallow geothermal system is complex, as indicated by paragenetic relations and strong compositional zoning in calc-silicate minerals, such as epidote. Calculation of local equilibria between calc-silicates and calcite suggests that the CO2 content of the geothermal fluids increased during the evolution of this geothermal system. Zoned hydrothermal amphiboles at 3.1 km depth include tschermakitic hornblende (~13 wt. % Al2O3), suggesting temperatures in the upper 300°C range. Similarly, analyses of hydrogen isotopic ratios of epidotes and amphiboles currently underway indicate that meteoric water has mixed with seawater during the evolution of the Reykjanes geothermal system. The Reykjanes Peninsula is a superb location for scientific investigations of the deeper levels of a high enthalpy

  13. The accurate location of the injection- induced microearthquakes in German Continental Deep Drilling Program

    Institute of Scientific and Technical Information of China (English)

    涂毅敏; 陈运泰

    2002-01-01

    From August 21, 2000 to October 20, 2000,a fluid injection-induced seismicity experiment has been carried out in the KTB (German Continental Deep Drilling Program). The KTB seismic network recorded more than 2 700 events. Among them 237 events were of high signal-to-noise ratio, and were processed and accurately located. When the events were located, non KTB events were weeded out by Wadati(s method. The standard deviation, mean and median were obtained by Jackknife's technique, and finally the events were accurately located by Geiger(s method so that the mean error is about 0.1 km. No earthquakes with focal depth greater than 9.3 km, which is nearly at the bottom of the hole, were detected. One of the explanation is that at such depths the stress levels may not close to the rock(s frictional strength so that failure could not be induced by the relatively small perturbation in pore pressure. Or at these depths there may be no permeable, well-oriented faults. This depth may be in close proximity to the bottom of the hole to the brittle-ductile transition, even in this relatively stable interior of the interaplate. This phenomenon is explained by the experimental results and geothermal data from the superdeep borehole.

  14. Annular multiphase flow behavior during deep water drilling and the effect of hydrate phase transition

    Institute of Scientific and Technical Information of China (English)

    Wang Zhiyuan; Sun Baojiang

    2009-01-01

    It is very important to understand the annular multiphase flow behavior and the effect of hydrate phase transition during deep water drilling. The basic hydrodynamic models, including mass, momentum, and energy conservation equations, were established for annular flow with gas hydrate phase transition during gas kick. The behavior of annular multiphase flow with hydrate phase transition was investigated by analyzing the hydrate-forming region, the gas fraction in the fluid flowing in the annulus, pit gain, bottom hole pressure, and shut-in casing pressure. The simulation shows that it is possible to move the hydrate-forming region away from sea floor by increasing the circulation rate. The decrease in gas volume fraction in the annulus due to hydrate formation reduces pit gain, which can delay the detection of well kick and increase the risk of hydrate plugging in lines. Caution is needed when a well is monitored for gas kick at a relatively low gas production rate, because the possibility of hydrate presence is much greater than that at a relatively high production rate. The shut-in casing pressure cannot reflect the gas kick due to hydrate formation, which increases with time.

  15. The accurate location of the injection-induced microearthquakes in German Continental Deep Drilling Program

    Science.gov (United States)

    Tu, Yi-Min; Chen, Yun-Tai

    2002-11-01

    From August 21, 2000 to October 20, 2000 a fluid injection-induced seismicity experiment has been carried out in the KTB (German Continental Deep Drilling Program). The KTB seismic network recorded more than 2 700 events. Among them 237 events were of high signal-to-noise ratio, and were processed and accurately located. When the events were located, non KTB events were weeded out by Wadati’s method. The standard deviation, mean and median were obtained by Jackknife’s technique, and finally the events were accurately located by Geiger’s method so that the mean error is about 0.1 km. No earthquakes with focal depth greater than 9.3 km, which is nearly at the bottom of the hole, were detected. One of the explanation is that at such depths the stress levels may not close to the rock’s frictional strength so that failure could not be induced by the relatively small perturbation in pore pressure. Or at these depths there may be no permeable, well-oriented faults. This depth may be in close proximity to the bottom of the hole to the brittle-ductile transition, even in this relatively stable interior of the interaplate. This phenomenon is explained by the experimental results and geothermal data from the superdeep borehole.

  16. Better well control through safe drilling margin identification, influx analysis and direct bottom hole pressure control method for deep water

    Energy Technology Data Exchange (ETDEWEB)

    Veeningen, Daan [National Oilwell Varco IntelliServ (NOV), Houston, TX (United States)

    2012-07-01

    Currently, well control events are almost exclusively detected by using surface measurements. Measuring a volume increase in the 'closed loop' mud circulation system; a standpipe pressure decrease; or changes in a variety of drilling parameters provide indicators of a kick. Especially in deep water, where the riser comprises a substantial section of the well bore, early kick detection is paramount for limiting the severity of a well bore influx and improve the ability to regain well control. While downhole data is presently available from downhole tools nearby the bit, available data rates are sparse as mud pulse telemetry bandwidth is limited and well bore measurements compete with transmission of other subsurface data. Further, data transfer is one-directional, latency is significant and conditions along the string are unknown. High-bandwidth downhole data transmission system, via a wired or networked drill string system, has the unique capability to acquire real-time pressure and temperature measurement at a number of locations along the drill string. This system provides high-resolution downhole data available at very high speed, eliminating latency and restrictions that typically limit the availability of downhole data. The paper describes well control opportunities for deep water operations through the use of downhole data independent from surface measurements. First, the networked drill string provides efficient ways to identify pore pressure, fracture gradient, and true mud weight that comprise the safe drilling margin. Second, the independent measurement capability provides early kick detection and improved ability to analyze an influx even with a heterogeneous mud column through distributed along-string annular pressure measurements. Third, a methodology is proposed for a direct measurement method using downhole real-time pressure for maintaining constant bottom hole pressure during well kills in deep water. (author)

  17. Deep drilling and sampling via the wireline auto-gopher driven by piezoelectric percussive actuator and EM rotary motor

    Science.gov (United States)

    Bar-Cohen, Yoseph; Badescu, Mircea; Sherrit, Stewart; Zacny, Kris; Paulsen, Gale L.; Beegle, Luther; Bao, Xiaoqi

    2012-04-01

    The ability to penetrate subsurfaces and perform sample acquisition at depths of meters is critical for future NASA in-situ exploration missions to bodies in the solar system, including Mars, Europa, and Enceladus. A corer/sampler was developed with the goal of acquiring pristine samples by reaching depths on Mars beyond the oxidized and sterilized zone. The developed rotary-hammering coring drill, called Auto-Gopher, employs a piezoelectric actuated percussive mechanism for breaking formations and an electric motor rotates the bit to remove the powdered cuttings. This sampler is a wireline drill that is incorporated with an inchworm mechanism allowing thru cyclic coring and core removal to reach great depths. The penetration rate is optimized by simultaneously activating the percussive and rotary motions of the Auto-Gopher. The percussive mechanism is based on the Ultrasonic/Sonic Drill/Corer (USDC) mechanism, which is driven by a piezoelectric stack, demonstrated to require low axial preload. The Auto-Gopher has been produced taking into account the lessons learned from the development of the Ultrasonic/Sonic Gopher that was designed as a percussive ice drill and was demonstrated in Antarctica in 2005 to reach about 2 meters deep. A field demonstration of the Auto-Gopher is currently being planned with the objective of reaching as deep as 3 to 5 meters in tufa formation.

  18. Deep Drilling Basic Research: Volume 4 - System Description. Final Report, November 1988--August 1990

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, E.E.; Maurer, W.C.; Hood, M.; Cooper, G.; Cook, N.

    1990-06-01

    The first section of this Volume will discuss the ''Conventional Drilling System''. Today's complex arrangement of numerous interacting systems has slowly evolved from the very simple cable tool rigs used in the late 1800s. Improvements to the conventional drilling rig have varied in size and impact over the years, but the majority of them have been evolutionary modifications. Each individual change or improvement of this type does not have significant impact on drilling efficiency and economics. However, the change is almost certain to succeed, and over time--as the number of evolutionary changes to the system begin to add up--improvements in efficiency and economics can be seen. Some modifications, defined and described in this Volume as Advanced Modifications, have more than just an evolutionary effect on the conventional drilling system. Although the distinction is subtle, there are several examples of incorporated advancements that have had significantly more impact on drilling procedures than would a truly evolutionary improvement. An example of an advanced modification occurred in the late 1970s with the introduction of Polycrystalline Diamond Compact (PDC) drill bits. PDC bits resulted in a fundamental advancement in drilling procedures that could not have been accomplished by an evolutionary improvement in materials metallurgy, for example. The last drilling techniques discussed in this Volume are the ''Novel Drilling Systems''. The extent to which some of these systems have been developed varies from actually being tested in the field, to being no more than a theoretical concept. However, they all have one thing in common--their methods of rock destruction are fundamentally different from conventional drilling techniques. When a novel drilling system is introduced, it is a revolutionary modification of accepted drilling procedures and will completely replace current techniques. The most prominent example of a

  19. Some cases of machining large-scale parts: Characterization and modelling of heavy turning, deep drilling and broaching

    Science.gov (United States)

    Haddag, B.; Nouari, M.; Moufki, A.

    2016-10-01

    Machining large-scale parts involves extreme loading at the cutting zone. This paper presents an overview of some cases of machining large-scale parts: heavy turning, deep drilling and broaching processes. It focuses on experimental characterization and modelling methods of these processes. Observed phenomena and/or measured cutting forces are reported. The paper also discusses the predictive ability of the proposed models to reproduce experimental data.

  20. Application of just-in-time manufacturing techniques in radioactive source in well logging industry

    Directory of Open Access Journals (Sweden)

    Atma Yudha Prawira

    2017-03-01

    Full Text Available Nuclear logging is one of major areas of logging development. This paper presents an empirical investigation to bring the drilling and completion of wells from an ill-defined art to a refined sci-ence by using radioactive source to “look and measure” such as formation type, formation dip, porosity, fluid type and numerous other important factors. The initial nuclear logging tools rec-ords the radiation emitted by formation as they were crossed by boreholes. Gamma radiation is used in well logging as it is powerful enough to penetrate the formation and steel casing. The ra-dioactive source is reusable so that after engineer finished the job the radioactive source is sent back to bunker. In this case inventory level of radioactive source is relatively high compared with monthly movement and the company must spend large amount of cost just for inventory. After calculating and averaging the monthly movement in 2014 and 2015, we detected a big pos-sibility to cut the inventory level to reduce the inventory cost.

  1. Presentation of the new Department of Drilling, Special Deep Drilling Equipment and Mining Machinery of the Institute of Drilling and Fluid Mining of TU Bergakademie Freiberg University; Vorstellung des neuen Lehrstuhls fuer Bohrtechnik, Spezialtiefbauausruestungen und Bergbaumaschinen am Institut fuer Bohrtechnik und Fluidbergbau der TU Bergakademie Freiberg

    Energy Technology Data Exchange (ETDEWEB)

    Reich, M.; Ksienzyk, F. [TU Bergakademie Freiberg (Germany)

    2007-09-13

    The paper presents the new Department of Drilling, Special Deep Drilling Equipment and Mining Machinery of the Institute of Drilling and Fluid Mining of TU Bergakademie Freiberg University. The new combination of drilling technology and mechanical engineering reflects the rapid technological development of deep drilling during the past two decades. Teaching subjects and research activities are described. Although trends are positive, there are still not enough students of drilling and fluid mining. If the rapidly increasing demand for engineers specializing in drilling technology and petroleum and natural gas production is to be met on a medium-term basis, joint efforts of industry and universities will be necessary as discussed in this paper. (orig.)

  2. Coring to the West Antarctic ice sheet bed with a new Deep Ice Sheet Coring (DISC) drill

    Science.gov (United States)

    Bentley, C. R.; Taylor, K. C.; Shturmakov, A. J.; Mason, W. P.; Emmel, G. R.; Lebar, D. A.

    2005-05-01

    As a contribution to IPY 2007-2008, the U.S. ice core research community, supported by the National Science Foundation, plans to core through the West Antarctic ice sheet (WAIS) at the ice-flow divide between the Ross Sea and Amundsen Sea drainage systems. The aim is to develop a unique series of interrelated climatic, ice-dynamic, and biologic records focused on understanding interactions among global earth systems. There will be approximately 15 separate but synergistic projects to analyze the ice and interpret the records. The most significant expected outcome of the WAIS Divide program will be climate records for the last ~40,000 years with an annually resolved chronology (through layer counting), comparable to the records from central Greenland. The data will also extend, at lower temporal resolution, to approximately 100,000 BP. These records will permit comparison of environmental conditions between the northern and southern hemispheres, and study of greenhouse gas concentrations in the paleoatmosphere, with unprecedented detail. To accomplish the coring, an innovative new Deep Ice Sheet Coring (DISC) drill is being built at the University of Wisconsin. The modular design of the bore-hole assembly (sonde) provides high flexibility for producing a 122 mm diameter ice core to depths of 4,000 m with maximum core lengths of 4 m. The DISC drill has a rotating outer barrel that can be used with or without an inner barrel designed to improve core recovery in brittle ice. Separate and independent motors for the drill and pump allow cutter speeds from 0 to 150 rpm and pump rates from 0 to 140 gpm. The high pumping rate should alleviate problems drilling in warm ice near the bed; it also helps make tripping speeds several times faster than with the old US drill. Other innovations include vibration and acoustic sensors for monitoring the drilling process, a segmented core barrel to avoid the formerly persistent problem of bent core barrels, and a high-speed data

  3. A Green's function approach for assessing the thermal disturbance caused by drilling deep boreholes in rock or ice

    Science.gov (United States)

    Clow, Gary D.

    2015-01-01

    A knowledge of subsurface temperatures in sedimentary basins, fault zones, volcanic environments and polar ice sheets is of interest for a wide variety of geophysical applications. However, the process of drilling deep boreholes in these environments to provide access for temperature and other measurements invariably disturbs the temperature field around a newly created borehole. Although this disturbance dissipates over time, most temperature measurements are made while the temperature field is still disturbed. Thus, the measurements must be ‘corrected’ for the drilling-disturbance effect if the undisturbed temperature field is to be determined. This paper provides compact analytical solutions for the thermal drilling disturbance based on 1-D (radial) and 2-D (radial and depth) Green's functions (GFs) in cylindrical coordinates. Solutions are developed for three types of boundary conditions (BCs) at the borehole wall: (1) prescribed temperature, (2) prescribed heat flux and (3) a prescribed convective condition. The BC at the borehole wall is allowed to vary both with depth and time. Inclusion of the depth dimension in the 2-D solution allows vertical heat-transfer effects to be quantified in situations where they are potentially important, that is, near the earth's surface, at the bottom of a well and when considering finite-drilling rates. The 2-D solution also includes a radial- and time-dependent BC at the earth's surface to assess the impact of drilling-related infrastructure (drilling pads, mud pits, permanent shelters) on the subsurface temperature field. Latent-heat effects due to the melting and subsequent refreezing of interstitial ice while drilling a borehole through ice-rich permafrost can be included in the GF solution as a moving-plane heat source (or sink) located at the solid–liquid interface. Synthetic examples are provided illustrating the 1-D and 2-D GF solutions. The flexibility of the approach allows the investigation of thermal

  4. Rapid Access Ice Drill: A New Tool for Exploration of the Deep Antarctic Ice Sheets and Subglacial Geology

    Science.gov (United States)

    Goodge, J. W.; Severinghaus, J. P.

    2014-12-01

    The Rapid Access Ice Drill (RAID) will penetrate the Antarctic ice sheets in order to core through deep ice, the glacial bed, and into bedrock below. This new technology will provide a critical first look at the interface between major ice caps and their subglacial geology. Currently in construction, RAID is a mobile drilling system capable of making several long boreholes in a single field season in Antarctica. RAID is interdisciplinary and will allow access to polar paleoclimate records in ice >1 Ma, direct observation at the base of the ice sheets, and recovery of rock cores from the ice-covered East Antarctic craton. RAID uses a diamond rock-coring system as in mineral exploration. Threaded drill-pipe with hardened metal bits will cut through ice using reverse circulation of Estisol for pressure-compensation, maintenance of temperature, and removal of ice cuttings. Near the bottom of the ice sheet, a wireline bottom-hole assembly will enable diamond coring of ice, the glacial bed, and bedrock below. Once complete, boreholes will be kept open with fluid, capped, and made available for future down-hole measurement of thermal gradient, heat flow, ice chronology, and ice deformation. RAID will also sample for extremophile microorganisms. RAID is designed to penetrate up to 3,300 meters of ice and take sample cores in less than 200 hours. This rapid performance will allow completion of a borehole in about 10 days before moving to the next drilling site. RAID is unique because it can provide fast borehole access through thick ice; take short ice cores for paleoclimate study; sample the glacial bed to determine ice-flow conditions; take cores of subglacial bedrock for age dating and crustal history; and create boreholes for use as an observatory in the ice sheets. Together, the rapid drilling capability and mobility of the drilling system, along with ice-penetrating imaging methods, will provide a unique 3D picture of the interior Antarctic ice sheets.

  5. Deep drilling of ancient Lake Ohrid (Balkan region) to capture over 1 million years of evolution and global climate cycling

    Science.gov (United States)

    Wagner, Bernd; Francke, Alexander; Wilke, Thomas; Krastel, Sebastian; Zanchetta, Giovanni; Sulpizio, Roberto; Reicherter, Klaus; Leng, Melanie; Grazhdani, Andon; Trajanovski, Sasho; Levkov, Zlatko; Reed, Jane; Wonik, Thomas

    2014-05-01

    Ancient lakes, with sediment records spanning >1 million years, are very rare. The UNESCO World Heritage site of Lake Ohrid in the Balkan region is thought to be the oldest lake in continuous existence in Europe and, with 212 endemic species described to date, is a hotspot of evolution. An international group of scientists working on a project entitled 'Scientific Collaboration on Past Speciation Conditions in Lake Ohrid (SCOPSCO)' realized a deep drilling campaign of Lake Ohrid in spring 2013. Based on several coring seismic campaigns between 2004 and 2011, Lake Ohrid became the target of an ICDP deep drilling campaign, with specific research aims: (i) obtain precise information about the age and origin of the lake, (ii) unravel the lake's seismotectonic history, (iii) obtain a continuous record of Quaternary volcanic activity and climate change, and (iv) investigate the influence of major geological/environmental events on evolution and the generation of extraordinary endemic biodiversity. Drilling began in April 2013 using the Deep Lake Drilling System (DLDS) of DOSECC (USA). The campaign, completed by late May, was deemed one of the most successful ICDP lake drilling projects, with a total of ~2100 m of sediment recovered from four different sites. At the central "DEEP" site, hydro-acoustic data indicated a maximum sediment fill of ca. 700 m, of which the uppermost 568 m was recovered. Coarse gravel and pebbles underlying clay and shallow water facies hampered deeper penetration. A total of 1526 m of sediment cores was collected from six boreholes, with a composite field recovery ('master core') of 544 m (95%). Three additional sites were drilled in order to analyze lake-level fluctuations, catchment dynamics, biodiversity and evolution processes ("Cerava", deepest drilled depth: 90 m), to investigate active tectonics and spring dynamics ("Gradiste", deepest drilled depth: 123 m), and to try to understand the geological origins of the Ohrid Basin ("Pestani

  6. Geothermal Studies of the Outokumpu Deep Drill Hole, Finland: Vertical variation in heat flow and palaeoclimatic implications

    Science.gov (United States)

    Kukkonen, I. T.; Rath, V.; Kivekäs, L.; Šafanda, J.; Čermak, V.

    2012-04-01

    Detailed geothermal studies of deep drill holes provide insights to heat transfer processes in the crust, and allow separation of different factors involved, such as palaeoclimatic and structural conductive effects as well as advective fluid flow effects. We present high resolution geothermal results of the 2,516 m deep Outokumpu Deep Drill Hole in eastern Finland drilled in 2004-2005 into a Palaeoproterozoic formation with metasedimentary rocks, ophiolite-derived altered ultramafic rocks and pegmatitic granite. The down-hole temperatures have been logged five times after end of drilling and extend to day 948 after drilling. The hole is completely cored (79% core coverage) and thermal conductivity measurements were done at 1 m intervals. The geothermal results on temperature gradient, thermal conductivity and heat flow density yield an exceptionally detailed data set and indicate a significant vertical variation in gradient and heat flow density. Heat flow density increases from about 28-32 mW m-2 in the uppermost 1000 m to 40-45 mW m-2 at depths exceeding 2000 m. The estimated undisturbed surface heat flow value is 42 mWm-2. We present results on forward and inverse transient conductive models which suggest that the vertical variation in heat flow can mostly be attributed to a palaeoclimatic effect due to ground surface temperature (GST) variations during the last 100,000 years. The modelling suggests that the average GST was about -3…-4°C during the Weichselian glaciation. Holocene GST values are within ±2 degree from the present average GST in Outokumpu (5°C). The topographic hydraulic heads and hydraulic conductivity of crystalline rocks are low which suggests that advective heat transfer in the formation is not significant. The slow replacement of fresh flushing water by saline formation fluids is observed in the hole, but it does not generate significant thermal disturbances in the logs. On the other hand, free sluggish thermal convection is present in

  7. Pervasive, high temperature hydrothermal alteration in the RN-17B drill core, Reykjanes Geothermal System-Iceland Deep Drilling Project

    Science.gov (United States)

    Zierenberg, R. A.; Schiffman, P.; Marks, N. E.; Reed, M. H.; Elders, W. A.; Fridleifsson, G. O.

    2010-12-01

    In November 2008, 9.5 m of core were recovered from Reykjanes production well RN-17B at a depth of 2800m. The core consists mainly of hyaloclastite breccias, hetrolithic breccias with clasts of crystalline basalt, and volcaniclastic sandstones/siltstones. Much of the material appears to have been transported and redeposited, but homolithic breccias and hyaloclastites, some with upright flow lobes of basalt with quenched rims, are interpreted to have erupted in situ. Fine-scale features (glass rims, quench crystals, vesicles, phenocrysts) are well preserved, but all lithologies are pervasively hydrothermally altered such that primary clinopyroxene is ubiquitously uralitized and primary plagioclase (An42-80) is replaced by albite and/or more calcic plagioclase. In contrast, cuttings of similar lithologies, recovered by rotary drilling in intervals immediately above and below the core, exhibit much lesser degrees of hydrothermal alteration and commonly contain igneous plagioclase and clinopyroxene. Vitric clasts in the core are recrystallized into aggregates of chlorite and actinolite. In some breccias, cm-scale metadomains are composed of patchy albite or actinolite/magnesiohornblende giving the core a green and white spotted appearance. Minor amounts (<1%) of disseminated pyrite occur throughout the core, but two intervals with more abundant sulfide contain chalcopyrite and sphalerite in addition to pyrite. Amygdales and vugs in the breccias, initially filled with chlorite, actinolite, epidote, and/or albite, have been partly overprinted with hornblende and anorthite. The core is cut in places by < 1 cm- wide veins composed of early epidote + actinolite + titanite and later anorthite + magnesiohornblende/pargasite. Quartz is not present in any alteration domains observed in the core, although it is reported from virtually all of the cutting intervals above and below the cored section. Seawater-basalt reaction calculations suggest that albite formed during early

  8. The development of and experiments on electromagnetic measurement while a drilling system is used for deep exploration

    Science.gov (United States)

    Lu, Chunhua; Jiang, Guosheng; Wang, Ziqi; Wang, Jiahao; Wang, Chenli

    2016-10-01

    An electromagnetic measurement while drilling system (EM-MWD) can transfer well track state parameters to the ground in real time, which makes it an indispensable technology for deep-hole drilling. This paper introduces the development of and experiments on an EM-MWD system used for deep exploration in the People’s Republic of China. The designed EM-MWD system is composed of a downhole instrument and a ground instrument, and we elaborate on the structural design of the downhole instrument, the design of the transmission and control circuits and the signal modulation. This work also covers the software and hardware design of the ground instrument and signal demodulation technologies. Finally, some indoor signal decoding experiments and some in-hole signal transmission experiments are performed. This study indicates that the designed EM-MWD system can measure information for downhole drilling parameters and send it to the ground effectively, while the ground receiver can decode the signal accurately and reliably, and the desired signal can be obtained. Furthermore, the strength of the received signal is not affected by the polar distance within a certain polar distance.

  9. Speed of engagement with support generated by a smoking cessation smartphone Just In Time Adaptive Intervention (JITAI

    Directory of Open Access Journals (Sweden)

    Felix Naughton

    2015-10-01

    Full Text Available Background: An advantage of the high portability and sensing capabilities of smartphones is the potential for health apps to deliver advice and support to individuals close in time to when it is deemed of greatest relevance and impact, often referred to as Just In Time Adaptive Interventions (JITAI. However, little research has been undertaken to explore the viability of JITAI in terms of how long it takes users to engage with support triggered by real time data input, compared to scheduled support, and whether context affects response. This paper is focused on Q Sense, a smoking cessation app developed to deliver both Just in Time and scheduled support messages (every morning during a smoker’s quit attempt. The Just in Time cessation support generated by Q Sense is triggered by and tailored to real time context using location sensing. Objectives: To assess: 1 the time to engage with the app after a Just in Time support notification is delivered and whether this is influenced by the context in which the notification was initially delivered, 2 whether the time to engage with the app differs between Just in Time support notifications and scheduled support message notifications and 3 whether findings from objectives 1 and 2 differ between smokers receiving or not receiving NHS smoking cessation support. Methods: Data are from two studies evaluating the use of Q Sense: a feasibility study using an opportunity sample of smokers initiating a quit attempt with Q Sense without NHS cessation support (N=15 and an ongoing acceptability study of smokers receiving NHS smoking cessation support alongside app use (target N=40, recruitment due to be completed end of November 2015. Time elapse between notification generation and the user opening the app will be calculated and compared between message types (Just in Time vs. scheduled messages, contexts (home, work, socialising, other and samples (receiving or not receiving NHS cessation support using t

  10. Interstitial solutions and diagenesis in deeply buried marine sediments: results from the Deep Sea Drilling Project

    Science.gov (United States)

    Sayles, F.L.; Manheim, F. T.

    1975-01-01

    Through the Deep Sea Drilling Project samples of interstitial solutions of deeply buried marine sediments throughout the World Ocean have been obtained and analyzed. The studies have shown that in all but the most slowly deposited sediments pore fluids exhibit changes in composition upon burial. These changes can be grouped into a few consistent patterns that facilitate identification of the diagenetic reactions occurring in the sediments. Pelagic clays and slowly deposited (recrystallization of biogenic calcite and the substitution of Mg2+ for Ca2+ during this reaction. The Ca-Mg-carbonate formed is most likely a dolomitic phase. A related but more complex pattern is found in carbonate sediments deposited at somewhat greater rates. Ca2+ and Sr2+ enrichment is again characteristic, but Mg2+ losses exceed Ca2+ gains with the excess being balanced by SO4post staggered2- losses. The data indicate that the reactions are similar to those noted above, except that the Ca2+ released is not kept in solution but is precipitated by the HCO3post staggered- produced in SO4post staggered2- reduction. In both these types of pore waters Na+ is usually conservative, but K+ depletions are frequent. In several partly consolidated sediment sections approaching igneous basement contact, very marked interstitial calcium enrichment has been found (to 5.5 g/kg). These phenomena are marked by pronounced depletion in Na+, Si and CO2, and slight enhancement in Cl-. The changes are attributed to exchange of Na+ for Ca2+ in silicate minerals forming from submarine weathering of igneous rocks such as basalts. Water is also consumed in these reactions, accounting for minor increases in total interstitial salinity. Terrigenous, organic-rich sediments deposited rapidly along continental margins also exhibit significant evidences of alteration. Microbial reactions involving organic matter lead to complete removal of SO4post staggered2-, strong HCO3post staggered- enrichment, formation of NH4post

  11. Improved Tubulars for Better Economics in Deep Gas Well Drilling using Microwave Technology

    Energy Technology Data Exchange (ETDEWEB)

    Dinesh Agrawal; Paul Gigl; Mahlon Dennis

    2006-02-01

    The objective of the research program has been to improve the rate-of-penetration in deep hostile environments by improving the life cycle and performance of coiled-tubing, an important component of a deep well drilling system for oil and gas exploration. The current process of the manufacture long tubular steel products consists of shaping the tube from flat strip, welding the seam and sections into lengths that can be miles long, and coiling onto reels. However, the welds, that are a weak point, now limit the performance of the coil tubing. This is not only from a toughness standpoint but also from a corrosion standpoint. By utilizing the latest developments in the sintering of materials with microwave energy and powder metal extrusion technology for the manufacture of seamless coiled tubing and other tubular products, these problems can be eliminated. The project is therefore to develop a continuous microwave process to sinter continuously steel tubulars and butt-join them using microwave/induction process. The program started about three years ago and now we are in the middle of Phase II. In Phase I (which ended in February 2005) a feasibility study of the extrusion process of steel powder and continuously sinter the extruded tubing was conducted. The research program has been based on the development of microwave technology to process tubular specimens of powder metals, especially steels. The existing microwave systems at the Materials Research Laboratory (MRL) and Dennis Tool Company (DTC) were suitably modified to process tubular small specimens. The precursor powder metals were either extruded or cold isostatically pressed (CIP) to form tubular specimens. After conducting an extensive and systematic investigation of extrusion process for producing long tubes, it was determined that there were several difficulties in adopting extrusion process and it cannot be economically used for producing thousands of feet long green tubing. Therefore, in the Phase II the

  12. 科学深孔复杂地层钻进技术难题与对策%Technical Problems and Countermeasures for the Drilling Operation in Complex Formations of Scientific Deep Drilling Projects

    Institute of Scientific and Technical Information of China (English)

    张伟

    2014-01-01

    This article introduces the difficulties and technical problems encountered in the drilling operation in complex formation of scientific deep drilling projects.The main technical problems are broken formation drilling and strong shrinkage formation drilling.Technical measures for resolving the problems, referring to core drilling technologies, drill rig, drilling mud system and special drilling and cementing technologies used for strong shrinkage formation, are discussed.%介绍了在复杂地层科学深钻施工时遇到的困难和问题,主要包括破碎地层钻进问题和强缩径地层钻进问题,讨论了解决这些技术难题时采取的应对技术方案和措施,涉及取心钻进工艺方法和器具、钻机、泥浆体系以及极破碎、强缩径地层的特殊钻进、固井工艺和器具。

  13. Post-drilling changes in seabed landscape and megabenthos in a deep-sea hydrothermal system, the Iheya North field, Okinawa Trough.

    Science.gov (United States)

    Nakajima, Ryota; Yamamoto, Hiroyuki; Kawagucci, Shinsuke; Takaya, Yutaro; Nozaki, Tatsuo; Chen, Chong; Fujikura, Katsunori; Miwa, Tetsuya; Takai, Ken

    2015-01-01

    There has been an increasing interest in seafloor exploitation such as mineral mining in deep-sea hydrothermal fields, but the environmental impact of anthropogenic disturbance to the seafloor is poorly known. In this study, the effect of such anthropogenic disturbance by scientific drilling operations (IODP Expedition 331) on seabed landscape and megafaunal habitation was surveyed for over 3 years using remotely operated vehicle video observation in a deep-sea hydrothermal field, the Iheya North field, in the Okinawa Trough. We focused on observations from a particular drilling site (Site C0014) where the most dynamic change of landscape and megafaunal habitation was observed among the drilling sites of IODP Exp. 331. No visible hydrothermal fluid discharge had been observed at the sedimentary seafloor at Site C0014, where Calyptogena clam colonies were known for more than 10 years, before the drilling event. After drilling commenced, the original Calyptogena colonies were completely buried by the drilling deposits. Several months after the drilling, diffusing high-temperature hydrothermal fluid began to discharge from the sedimentary subseafloor in the area of over 20 m from the drill holes, 'artificially' creating a new hydrothermal vent habitat. Widespread microbial mats developed on the seafloor with the diffusing hydrothermal fluids and the galatheid crab Shinkaia crosnieri endemic to vents dominated the new vent community. The previously soft, sedimentary seafloor was hardened probably due to barite/gypsum mineralization or silicification, becoming rough and undulated with many fissures after the drilling operation. Although the effects of the drilling operation on seabed landscape and megafaunal composition are probably confined to an area of maximally 30 m from the drill holes, the newly established hydrothermal vent ecosystem has already lasted 2 years and is like to continue to exist until the fluid discharge ceases and thus the ecosystem in the area has

  14. Exploring Just-in-Time Teaching 3D Development as a Tool for Enhancing Knowledge and Understanding

    Directory of Open Access Journals (Sweden)

    Morag C.E. McFadyen

    2013-12-01

    Full Text Available The integumentary system (skin is the first line of defence in the body and part of the innate immune system. Within first year modules on Pharmaceutical Biology and Integrative Physiology in the Masters of Pharmacy degree at Robert Gordon University (RGU several software tools were used to support both lecture and coursework material for the immune and integumentary systems. However, students had difficulty visualizing the various layers of the skin and how they become affected by different skin lesions. As a response to these identified learning difficulties, a just-in-time teaching 3-Dimensional elearning object was developed using free-to-use 3D CAD packages alongside common elearning software. The outcome was a virtualised human arm equipped to illustrate and label primary or secondary skin lesions whilst allowing spatial manipulation of the arm. This allowed students to manipulate and identify the specific skin layers involved. Evaluation of student engagement and learning was favourable, with students reflecting that they had a better understanding of the topic. Initial findings from this study highlight the benefits of quick, low-cost 3D production processes as just-in-time teaching elearning tools that have a positive impact on students’ performance.

  15. Critical elements in implementations of just-in-time management: empirical study of cement industry in Pakistan.

    Science.gov (United States)

    Qureshi, Muhammad Imran; Iftikhar, Mehwish; Bhatti, Mansoor Nazir; Shams, Tauqeer; Zaman, Khalid

    2013-01-01

    In recent years, inventory management is continuous challenge for all organizations not only due to heavy cost associated with inventory holding, but also it has a great deal to do with the organizations production process. Cement industry is a growing sector of Pakistan's economy which is now facing problems in capacity utilization of their plants. This study attempts to identify the key strategies for successful implementation of just-in-time (JIT) management philosophy on the cement industry of Pakistan. The study uses survey responses from four hundred operations' managers of cement industry in order to know about the advantages and benefits that cement industry have experienced by Just in time (JIT) adoption. The results show that implementing the quality, product design, inventory management, supply chain and production plans embodied through the JIT philosophy which infect enhances cement industry competitiveness in Pakistan. JIT implementation increases performance by lower level of inventory, reduced operations & inventory costs was reduced eliminates wastage from the processes and reduced unnecessary production which is a big challenge for the manufacturer who are trying to maintain the continuous flow processes. JIT implementation is a vital manufacturing strategy that reaches capacity utilization and minimizes the rate of defect in continuous flow processes. The study emphasize the need for top management commitment in order to incorporate the necessary changes that need to take place in cement industry so that JIT implementation can take place in an effective manner.

  16. On the Feasibility and Limitations of Just-in-Time Instruction Set Extension for FPGA-Based Reconfigurable Processors

    Directory of Open Access Journals (Sweden)

    Mariusz Grad

    2012-01-01

    Full Text Available Reconfigurable instruction set processors provide the possibility of tailor the instruction set of a CPU to a particular application. While this customization process could be performed during runtime in order to adapt the CPU to the currently executed workload, this use case has been hardly investigated. In this paper, we study the feasibility of moving the customization process to runtime and evaluate the relation of the expected speedups and the associated overheads. To this end, we present a tool flow that is tailored to the requirements of this just-in-time ASIP specialization scenario. We evaluate our methods by targeting our previously introduced Woolcano reconfigurable ASIP architecture for a set of applications from the SPEC2006, SPEC2000, MiBench, and SciMark2 benchmark suites. Our results show that just-in-time ASIP specialization is promising for embedded computing applications, where average speedups of 5x can be achieved by spending 50 minutes for custom instruction identification and hardware generation. These overheads will be compensated if the applications execute for more than 2 hours. For the scientific computing benchmarks, the achievable speedup is only 1.2x, which requires significant execution times in the order of days to amortize the overheads.

  17. Economic analysis of linking operating room scheduling and hospital material management information systems for just-in-time inventory control.

    Science.gov (United States)

    Epstein, R H; Dexter, F

    2000-08-01

    Operating room (OR) scheduling information systems can decrease perioperative labor costs. Material management information systems can decrease perioperative inventory costs. We used computer simulation to investigate whether using the OR schedule to trigger purchasing of perioperative supplies is likely to further decrease perioperative inventory costs, as compared with using sophisticated, stand-alone material management inventory control. Although we designed the simulations to favor financially linking the information systems, we found that this strategy would be expected to decrease inventory costs substantively only for items of high price ($1000 each) and volume (>1000 used each year). Because expensive items typically have different models and sizes, each of which is used by a hospital less often than this, for almost all items there will be no benefit to making daily adjustments to the order volume based on booked cases. We conclude that, in a hospital with a sophisticated material management information system, OR managers will probably achieve greater cost reductions from focusing on negotiating less expensive purchase prices for items than on trying to link the OR information system with the hospital's material management information system to achieve just-in-time inventory control. In a hospital with a sophisticated material management information system, operating room managers will probably achieve greater cost reductions from focusing on negotiating less expensive purchase prices for items than on trying to link the operating room information system with the hospital's material management information system to achieve just-in-time inventory control.

  18. Structural dynamics modification for derrick of deep well drilling rig based on experimental modal test and frequency sensitivity analysis

    Directory of Open Access Journals (Sweden)

    Hua Jian

    2015-09-01

    Full Text Available A statically designed derrick of deep oil well drilling rig may have poor dynamic characteristics, which can cause earlier structure failure of the drilling rig and harsh working condition. One such designed derrick is found to vibrate severely in operation while the rotation speed of rotary table is about 120 r/min with the working frequency of 2.0 Hz. To solve this problem, an experimental modal test of the derrick is conducted and the modal frequencies and vibration shapes are obtained. Through comparison of modal frequencies with that of exciting devices, it is found that the severe vibration of the drilling rig is caused by the resonance of second modal frequency (1.96 Hz and the working frequency of rotary table. Based on principles of sensitivity analysis and structural dynamics modification method, the frequency sensitivities of all nodes on the derrick are calculated and compared, and then seven nodes with high-frequency sensitivity are selected on which corresponding mass are added to vary the modal frequency. Result shows that the second modal frequency of the derrick is reduced to 1.42 Hz and is out of the normal working frequency range of rotary table, which demonstrates that the dynamic characteristics of the derrick is improved and severe vibration can be avoided.

  19. Characterization of Deep Internal Layers and Basal Conditions Around the WAIS Divide Drill Site by Surface-Based Radar

    Science.gov (United States)

    Laird, C. M.; Blake, W. A.; Gogineni, P. S.; Allen, C. T.; Leuschen, C. J.; Braaten, D. A.

    2008-12-01

    We used an ultra-wideband, very high frequency (120 to 300 MHz) surface-based radar to simultaneously map ice thickness, deep internal layers and the ice-bed interface around the West Antarctic Ice Sheet (WAIS) Divide deep drill site at a fine resolution. The radar was built by the Center for Remote Sensing of Ice Sheets (CReSIS) as part of the Polar Radar for Ice Sheet Measurements (PRISM) project with the main goal of developing and testing surface-operated radars to characterize ice thickness and bedrock conditions in Antarctica and Greenland. The system was fine-tuned in the field to a center frequency of 150 MHz with a bandwidth of 20 MHz to produce greater sensitivity. The survey covered a 30 km by 8 km area with 1-km line spacing along a polar stereographic grid that overlapped both the drill site and the WAIS Divide. The data have been processed for general use and are available on the CReSIS website (www.cresis.ku.edu). Echograms and digital ice thickness, bed elevation and bed reflectivity maps have been produced while analysis continues. Our major findings to date include: 1) internal layers are observed nearly continuously to 2800 m depth, as much as 500 m below the deepest previously mapped layers in this region, 2) internal layers have been detected to within 350 m of the bed, covering about 90% of the ice thickness, 3) ice thickness varies between approximately 3100 m and 3550 m over the grid and is about 3500 m at the drill site, 4) basal returns were mapped nearly continuously along grid lines and vary by more than 30 dB, indicating a wet bed at the drill site and frozen conditions elsewhere. The data will aid rigorous interpretations of the WAIS ice cores (including impurity records and the depth/age scale) and the morphology and evolution of the WAIS (mean annual accumulation rates, spatial extent, divide migration and volcanism). Fine-resolution information on deep internal layers, basal conditions and ice thickness/bed elevation will help

  20. Deep-C Drilling: Carbon Sequestration at Depth under Vine Crops

    Science.gov (United States)

    Holmes, Allister; Mueller, Karin; Clothier, Brent; Deurer, Markus

    2014-05-01

    to at least 0.5 m depth. Using the same methodology to 1 m depth, we determined SCS in two wine grape vineyards on shallow, stony alluvial soils. We found a difference between vineyard and adjacent pasture SCS of nearly 16 t/ha. As the vines are 25 years old, this equates to carbon sequestration rates of 640kg/ha/year. Our results of the 'space-for-time' analysis also showed that all sequestration had occurred below 0.5 m. Therefore, we decided to deep-C drill further. In a 30-year old kiwifruit orchard and an adjacent pasture, SCSs were measured to 9 m depth. In the kiwifruit orchard, we found a sequestration rate of 6.3 tonnes C per hectare per year greater than in the adjacent pasture that was the antecedent land use. The carbon sequestered each year within the top 1 m of soil equates to about 4% of the emissions of kiwifruit grown in New Zealand and consumed in the United Kingdom. However, if the stock in the top 9 m of soil is included in this calculation, then the amount of SOC sequestered equates to about 42% of the respective emissions that would be calculated by life cycle assessment.

  1. Deep-sea observations at hydrocarbon drilling locations: Contributions from the SERPENT Project after 120 field visits

    Science.gov (United States)

    Gates, Andrew R.; Benfield, Mark C.; Booth, David J.; Fowler, Ashley M.; Skropeta, Danielle; Jones, Daniel O. B.

    2017-03-01

    The SERPENT Project has been running for over ten years. In this time scientists from universities and research institutions have made more than 120 visits to oil rigs, drill ships and survey vessels operated by 16 oil companies, in order to work with the industry's Remotely Operated Vehicles (ROV). Visits have taken place in Europe, North and South America, Africa and Australasia at water depths from 100 m to nearly 3000 m. The project has directly produced >40 peer reviewed publications and data from the project's >2600 entry online image and video archive have been used in many others. The aim of this paper is to highlight examples of how valuable data can be obtained through collaboration with hydrocarbon exploration and production companies to use existing industry infrastructure to increase scientific discovery in unexplored areas and augment environmental monitoring of industrial activity. The large number of industry ROVs operating globally increases chance encounters with large, enigmatic marine organisms. SERPENT video observations include the deepest known records of species previously considered epipelagic such as scalloped hammerhead (Sphyrna lewini) and southern sunfish (Mola ramsayi) and the first in situ observations of pelagic species such as oarfish (Regalecus glesne). Such observations enable improvements to distribution records and description of behaviour of poorly understood species. Specimen collection has been used for taxonomic descriptions, functional studies and natural products chemistry research. Anthropogenic effects been assessed at the local scale using in situ observations and sample collection at the time of drilling operations and subsequent visits have enabled study of recovery from drilling. Future challenges to be addressed using the SERPENT approach include ensuring unique faunal observations by industry ROV operators are reported, further study of recovery from deep-water drilling activity and to carry out in situ studies to

  2. Just In Time Indexing

    OpenAIRE

    Mitra, Pinaki; Sundaram, Girish; PS, Sreedish

    2013-01-01

    One of the major challenges being faced by Database managers today is to manage the performance of complex SQL queries which are dynamic in nature. Since it is not possible to tune each and every query because of its dynamic nature, there is a definite possibility that these queries may cause serious database performance issues if left alone. Conventional indexes are useful only for those queries which are frequently executed or those columns which are frequently joined in SQL queries. This p...

  3. Just in Time

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    @@ 快速、经济的零件和模具制造. 1988年,第一台具有CharlesHull专利技术的全息技术应用设备的面世,开创了激光快速加工的新时代.随着该项技术的进一步研制开发,新型的、多功能的激光快速加工材料以及操作使用简便的激光快速加工制造设备也相继应运而生.

  4. Just in Time

    Science.gov (United States)

    Vanderpool, Nancy M.; Risacher, Joanne

    2006-01-01

    At the end of the day, most of those in higher education feel gratified for having accomplished meaningful work but somewhat overwhelmed with the pile of work yet to be tackled. Still, they see the need to do more beyond that. Indeed, it is becoming clear that there is a growing need for more contact between educators and students and a need to…

  5. Research in Complex Type Deep Hole Drilling Machine%复合型深孔加工机床的研究

    Institute of Scientific and Technical Information of China (English)

    刘来章; 张文强; 刘铸

    2014-01-01

    现代深孔加工机床加工方式分为外排屑(枪钻)和内排屑(BTA钻)两种,他们的供油通道和排屑通道相反、钻孔直径范围大小不同。研究了双主轴双导向型、单主轴双导向型、单主轴单导向型3种结构的复合型深孔加工机床,比较了这3种结构机床的优缺点。采用BTA和枪钻两种加工方式,可完成复杂机械零件较大孔径范围的深孔加工。%There are two processing methods of modern deep hole drilling machine,outside chip removing (gun drilling)and internal chip removing (BTA drilling). The oil supply channels and chip removing channels of them were opposite,and the borehole diameter range of them was different. Three structural types of complex deep holes drilling machines as the double spindle double orien-ted,single spindle double oriented and single spindle single oriented were researched. Larger diameter range of deep holes of compli-cated machinery parts can be machined,by using both methods of BTA drilling and gun drilling.

  6. Age constraints on the origin and growth history of a deep-water coral mound in the northeast Atlantic drilled during Integrated Ocean Drilling Program Expedition 307

    Science.gov (United States)

    Kano, Akihiro; Ferdelman, Timothy G.; Williams, Trevor; Henriet, Jean-Pierre; Ishikawa, Tsuyoshi; Kawagoe, Noriko; Takashima, Chiduru; Kakizaki, Yoshihiro; Abe, Kohei; Sakai, Saburo; Browning, Emily L.; Li, Xianghui; Ocean Drilling Program Expedition 307 Scientists

    2007-11-01

    Sr isotope stratigraphy provides a new age model for the first complete section drilled through a deep-water coral mound. The 155-m-long section from Challenger Mound in the Porcupine Sea-bight, southwest of Ireland, is on Miocene siliciclastics and consists entirely of sediments bearing well-preserved cold-water coral Lophelia pertusa. The 87Sr/86Sr values of 28 coral specimens from the mound show an upward-increasing trend, correspond to ages from 2.6 to 0.5 Ma, and identify a significant hiatus from ca. 1.7 to 1.0 Ma at 23.6 m below seafloor. The age of the basal mound sediments coincides with the intensification of Northern Hemisphere glaciations that set up the modern stratification of the northeast Atlantic and enabled coral growth. Mound growth persisted throughout glacial-interglacial fluctuations, reached a maximum rate (24 cm/k.y.) ca. 2.0 Ma, and ceased at 1.7 Ma. Unlike other buried mounds in Porcupine Seabight, Challenger Mound was only partly covered during its growth interruption, and growth restarted ca. 1.0 Ma.

  7. ?Just-in-Time? Battery Charge Depletion Control for PHEVs and E-REVs for Maximum Battery Life

    Energy Technology Data Exchange (ETDEWEB)

    DeVault, Robert C [ORNL

    2009-01-01

    Conventional methods of vehicle operation for Plug-in Hybrid Vehicles first discharge the battery to a minimum State of Charge (SOC) before switching to charge sustaining operation. This is very demanding on the battery, maximizing the number of trips ending with a depleted battery and maximizing the distance driven on a depleted battery over the vehicle s life. Several methods have been proposed to reduce the number of trips ending with a deeply discharged battery and also eliminate the need for extended driving on a depleted battery. An optimum SOC can be maintained for long battery life before discharging the battery so that the vehicle reaches an electric plug-in destination just as the battery reaches the minimum operating SOC. These Just-in-Time methods provide maximum effective battery life while getting virtually the same electricity from the grid.

  8. Just-in-time tomography (JiTT): a new concept for image-guided radiation therapy

    Energy Technology Data Exchange (ETDEWEB)

    Pang, G; Rowlands, J A [Toronto-Sunnybrook Regional Cancer Centre, 2075 Bayview Avenue, Toronto M4N 3M5 (Canada); Imaging Research, Sunnybrook and Women' s College Health Sciences Centre, Departments of Radiation Oncology and Medical Biophysics, University of Toronto, Toronto (Canada)

    2005-11-07

    Soft-tissue target motion is one of the main concerns in high-precision radiation therapy. Cone beam computed tomography (CBCT) has been developed recently to image soft-tissue targets in the treatment room and guide the radiation therapy treatment. However, due to its relatively long image acquisition time the CBCT approach cannot provide images of the target at the instant of the treatment and thus it is not adequate for imaging targets with intrafraction motion. In this note, a new approach for image-guided radiation therapy-just-in-time tomography (JiTT)-is proposed. Differing from CBCT, JiTT takes much less time to generate the needed tomographical, beam's-eye-view images of the treatment target at the right moment to guide the radiation therapy treatment. (note)

  9. 水户工厂开展JIT情况介绍%Just In Time(JIT)in Hitachi Mito Factory

    Institute of Scientific and Technical Information of China (English)

    庞世宁

    2000-01-01

    @@ JIT(Just-In-Time)译作准时生产制或适时管理.这种制度的要点是:生产线的各道工序只在必要的时候,按必要的数量,生产必要的产品,从而达到尽量减少在制品库存,提高效率、降低成本的目的.JIT系统是以准时生产为出发点,首先暴露出生产过量的浪费,进而暴露出其他方面的浪费(如设备布局不当、人员过多等),然后对设备、人员等资源进行调整.

  10. Just-in-time preemptive single machine problem with costs of earliness/tardiness, interruption and work-in-process

    Directory of Open Access Journals (Sweden)

    Mohammad Kazemi

    2012-04-01

    Full Text Available This paper considers preemption and idle time are allowed in a single machine scheduling problem with just-in-time (JIT approach. It incorporates Earliness/Tardiness (E/T penalties, interruption penalties and holding cost of jobs which are waiting to be processed as work-in-process (WIP. Generally in non-preemptive problems, E/T penalties are a function of the completion time of the jobs. Then, we introduce a non-linear preemptive scheduling model where the earliness penalty depends on the starting time of a job. The model is liberalized by an elaborately–designed procedure to reach the optimum solution. To validate and verify the performance of proposed model, computational results are presented by solving a number of numerical examples.

  11. A NOVEL OPTIMIZATION MODEL FOR SIMULTANEOUS COST-RISK REDUCTION IN MULTI-SUPPLIERS JUST-IN-TIME SYSTEMS

    Directory of Open Access Journals (Sweden)

    Faraj El Dabee

    2013-01-01

    Full Text Available In today’s competitive global markets, Just-in-Time (JIT is one of the main lean manufacturing approaches. It is used in organizations to improve performance and reduce costs and as a strategic core capability to ensure their market position. However, using JIT tightly couples various functions of the Supply Chain and increases the risk of propagating disruptions through the entire system. This study presents an ordering strategy for the supply of raw materials to the production system to meet customer satisfaction. A general model for cost-risk reduction is developed embracing multiple external and local backup suppliers. The outcomes from this model will be used to obtimise the simultaneous cost/risk reduction within JIT systems. The effectiveness of the developed model will be validated using a simplified example.

  12. Innovation in the Teaching-learning Processes: A Case Study Using Just-in-Time Teaching and Peer Instruction

    Directory of Open Access Journals (Sweden)

    Ana Carolina Maldonado-Fuentes

    2016-05-01

    Full Text Available Learning quality constitutes one of the main challenges faced by Higher Education, thus a student centered teaching and the development of educational innovations that use active methodologies have been promoted. This article aims to evaluate the impact of using Just-in-Time Teaching and Peer Instruction on the results of teaching a subject, of disciplinary character, in 17 students of a career on an initial teacher training belonging to Chile’s Council of Rectors. A pre and postest model was applied between August and December 2012. The analysis used descriptive techniques that allowed the characterization of the admission profile and inferentials to explain, statistically, the observed differences in the performance of the subjects. In terms of perception, a positive assessment of the relationship between students and the teacher in the classroom was observed, this stood out above the improvement in the handling of disciplinary content.

  13. Logistik och just-in-time - En utvärdering av OF Bygg i Umeå.

    OpenAIRE

    Wikner, Per

    2017-01-01

    Denna studie behandlar logistik och materialhantering med fokus på just-in-time-leveranser (JIT). Via intervjuer har data samlats in för att besvara forskningsfrågan; hur arbetar OF med JIT idag och finns det möjligheter till förbättring? Idag använder de inte JIT i någon större utsträckning, men ser en potential i metoden. Det framkom flera eventuella hinder för en renodlad implementering av JIT, främst relaterade till resurser och planering. Resultatet av studien blev att det finns möjlighe...

  14. Stop the hunting: using a wound care-specific EMR for 'just-in-time" supply ordering.

    Science.gov (United States)

    Turner, Toni; Walker, David

    2007-01-01

    Ensuring adequate stocks of wound care supplies at wound care to be tied up, and too little can cause problems for patients. Most facilities maintain a "par" level for each item, which requires that supplies be ordered even if the "par" is numerically short by one item. In addition, due to the current just-in-time environment, if attention is not paid to the par level, unexpected shortages of supplies can develop. By using Inventory Trak software developed by Intellicure, facility managers will always know how much stock is presentfor each item, as individual item barcodes are registered in the system each time an item is used through software-linking scanners. The result is increased efficiency, reduced cost to the facility, and an assurance that the facility will not run out of critical items.

  15. Optimizing python-based ROOT I/O with PyPy's tracing just-in-time compiler

    Science.gov (United States)

    Tlp Lavrijsen, Wim

    2012-12-01

    The Python programming language allows objects and classes to respond dynamically to the execution environment. Most of this, however, is made possible through language hooks which by definition can not be optimized and thus tend to be slow. The PyPy implementation of Python includes a tracing just in time compiler (JIT), which allows similar dynamic responses but at the interpreter-, rather than the application-level. Therefore, it is possible to fully remove the hooks, leaving only the dynamic response, in the optimization stage for hot loops, if the types of interest are opened up to the JIT. A general opening up of types to the JIT, based on reflection information, has already been developed (cppyy). The work described in this paper takes it one step further by customizing access to ROOT I/O to the JIT, allowing for fully automatic optimizations.

  16. Investigating the barriers of using just in time purchasing system for publically traded firms in Tehran stock exchange

    Directory of Open Access Journals (Sweden)

    Ghodrat Allah Haidari nejad

    2012-04-01

    Full Text Available Just in time is one of the most important components of having efficient production plan. The primary objective of JIT is to reduce the amount of storage as much as possible to remove the cost of inventories and work-in-progress. However, the implementation of JIT is a tedious task especially in developing countries, where there are shortages for essential infrastructures and increase the risk of production in case of JIT adaptation. In this paper, we present a survey to detect important factors preventing JIT implementation in Iran. The proposed study designs a questionnaire for assessing important factors influencing JIT adaptation, which includes inflation, political sanction, unreliable suppliers, shortage of cash flow and weak organizational culture. The results of our survey confirm that shortage of cash flow is the most important factor, follows by economical sanction and inflation.

  17. Numerical Simulation of Rock Mass Damage Evolution During Deep-Buried Tunnel Excavation by Drill and Blast

    Science.gov (United States)

    Yang, Jianhua; Lu, Wenbo; Hu, Yingguo; Chen, Ming; Yan, Peng

    2015-09-01

    Presence of an excavation damage zone (EDZ) around a tunnel perimeter is of significant concern with regard to safety, stability, costs and overall performance of the tunnel. For deep-buried tunnel excavation by drill and blast, it is generally accepted that a combination of effects of stress redistribution and blasting is mainly responsible for development of the EDZ. However, few open literatures can be found to use numerical methods to investigate the behavior of rock damage induced by the combined effects, and it is still far from full understanding how, when and to what degree the blasting affects the behavior of the EDZ during excavation. By implementing a statistical damage evolution law based on stress criterion into the commercial software LS-DYNA through its user-subroutines, this paper presents a 3D numerical simulation of the rock damage evolution of a deep-buried tunnel excavation, with a special emphasis on the combined effects of the stress redistribution of surrounding rock masses and the blasting-induced damage. Influence of repeated blast loadings on the damage extension for practical millisecond delay blasting is investigated in the present analysis. Accompanying explosive detonation and secession of rock fragments from their initial locations, in situ stress in the immediate vicinity of the excavation face is suddenly released. The transient characteristics of the in situ stress release and induced dynamic responses in the surrounding rock masses are also highlighted. From the simulation results, some instructive conclusions are drawn with respect to the rock damage mechanism and evolution during deep-buried tunnel excavation by drill and blast.

  18. Keeping Research Data from the Continental Deep Drilling Programme (KTB) Accessible and Taking First Steps Towards Digital Preservation

    Science.gov (United States)

    Klump, J. F.; Ulbricht, D.; Conze, R.

    2014-12-01

    The Continental Deep Drilling Programme (KTB) was a scientific drilling project from 1987 to 1995 near Windischeschenbach, Bavaria. The main super-deep borehole reached a depth of 9,101 meters into the Earth's continental crust. The project used the most current equipment for data capture and processing. After the end of the project key data were disseminated through the web portal of the International Continental Scientific Drilling Program (ICDP). The scientific reports were published as printed volumes. As similar projects have also experienced, it becomes increasingly difficult to maintain a data portal over a long time. Changes in software and underlying hardware make a migration of the entire system inevitable. Around 2009 the data presented on the ICDP web portal were migrated to the Scientific Drilling Database (SDDB) and published through DataCite using Digital Object Identifiers (DOI) as persistent identifiers. The SDDB portal used a relational database with a complex data model to store data and metadata. A PHP-based Content Management System with custom modifications made it possible to navigate and browse datasets using the metadata and then download datasets. The data repository software eSciDoc allows storing self-contained packages consistent with the OAIS reference model. Each package consists of binary data files and XML-metadata. Using a REST-API the packages can be stored in the eSciDoc repository and can be searched using the XML-metadata. During the last maintenance cycle of the SDDB the data and metadata were migrated into the eSciDoc repository. Discovery metadata was generated following the GCMD-DIF, ISO19115 and DataCite schemas. The eSciDoc repository allows to store an arbitrary number of XML-metadata records with each data object. In addition to descriptive metadata each data object may contain pointers to related materials, such as IGSN-metadata to link datasets to physical specimens, or identifiers of literature interpreting the data

  19. Deep drilling of silica glass by continuous-wave laser backside irradiation

    Science.gov (United States)

    Hidai, Hirofumi; Saito, Namiko; Matsusaka, Souta; Chiba, Akira; Morita, Noboru

    2016-04-01

    We propose a novel method for drilling of silica glass based on the continuous-wave laser backside irradiation (CW-LBI) phenomenon. The method allows drilling to be performed by single-shot irradiation using a CW laser. A spindle-shaped emission is generated in the bulk glass and is then guided to the glass surface, and at the instant that the beam reaches the surface, the glass material is ejected. The glass ejection process occurs for a time of ~250 μs. A hole that is similar in shape to that of the spindle-shaped emission is left. The hole length tended to increase linearly with increasing laser power. The laser power dependence of the spindle-shaped emission propagation velocity is also linear, and the velocity increases with increasing laser power. The hole diameters were smaller in the case where the laser focus position was set on the glass surface, and these diameters increased with increasing defocusing. The maximum hole depth reached more than 5 mm. Through-hole drilling was demonstrated using a 3-mm-thick glass substrate.

  20. Buoyed by geophysics : geophysics, just-in-time procurement help save millions on Ekwan pipeline buoyancy control

    Energy Technology Data Exchange (ETDEWEB)

    Roche, P.

    2005-09-01

    Large-diameter natural gas pipelines buried in wet muskeg have the potential to rise to the surface due to buoyancy. Until recently, the most reliable method to prevent this was to attach specially manufactured bolt-on concrete weights at closely spaced intervals. However, these weights significantly increase capital budgets by millions of dollars because each weight weighs 2,540 kg and costs $1,000. A less costly alternative for buoyancy control in shallow muskeg is for the contractor to simply dig a deeper ditch. Another option is to hold down the pipeline by polyester straps attached to screw anchors. The challenge of applying these less costly options is that heavy equipment cannot be brought to the site to determine ground conditions until after all procurement, assessment and design is completed. Engineers must therefore select a buoyancy control measure based only on air photos and possibly a few drill holes. However, air photos do not indicate the depth of muskeg. Although some muskeg areas may turn out to be thick enough to avoid buoyancy control altogether, once construction is underway, it is too late to opt for cheaper alternatives. EnCana Corporation's 24-inch Ekwan pipeline was recently constructed through a remote area of British Columbia to connect the Greater Sierra natural gas discovery to a tie-in point on Nova Gas Transmission's northwest mainline. Air photos indicated that half of the route was through muskeg. AMEC E and C Services Inc. was responsible for the engineering and management of the project. The company used a combination of geophysical techniques to learn about the ground conditions. Toboggan mounted portable equipment was hauled by snowmobiles along trails made earlier by the survey crews. Ground penetrating radar assessed the muskeg thickness. Fixed frequency electromagnetic surveys also enhanced the results of the ground penetrating radar. The number of bolt-on weights was reduced from 9,000 to 3,700, a savings of $3

  1. Preliminary geophysical, geohazard, and geomorphic mapping of the Alpine Fault Deep Fault Drilling Project (DFDP), Gaunt Creek, New Zealand

    Science.gov (United States)

    de Pascale, G. P.; Davies, T.; Nobes, D. C.; Quigley, M.; Sutherland, R.; Toy, V. G.; Norris, R. J.; Langridge, R. M.; Stahl, T.; Klahn, A.; Townend, J.

    2010-12-01

    In central South Island, the dextral-reverse Alpine Fault Zone (AFZ) forms the major plate boundary structure between the Pacific and Australian plates. The AFZ is thought to fail in large earthquakes (~ Mw 7-8) approximately every 200 to 400 years, to have last ruptured in 1717 and is associated with high rates of strain release and exhumation. The AFZ is the target of a multidisciplinary proposal called the Deep Fault Drilling Project or DFDP which proposes to drill, retrieve core, and test subsurface conditions of the AFZ from a shallow, Vegetation colonization (reflecting recent flooding) and presence of boulders and landslide debris were used to select sites. Over 600 m of ground penetrating radar (GPR) transects using a 50 MHz antenna, and 400 m of electrical resistivity data, were collected along the Late-Holocene alluvial fans to map subsurface stratigraphy. Preliminary GPR results show fluvial stratigraphy, bedrock contacts and faults in bedrock and sediments between 0 and 25 m below ground surface at Gaunt Creek. Electrical resistivity data imaged to 10 m. Geomorphic mapping (including fault trace mapping, terrace mapping, and surficial geological mapping) was integrated with geophysical data, LiDAR, and previous research at the site to determine optimum sites for DFDP drilling in early 2011. Ages of faulted deposits, and thus of fault offsets, will be obtained by radiocarbon dating, dendrochronology and/or OSL ages to better characterise recent earthquakes at Gaunt Creek. Though preliminary, this research is significant because it provides critical input parameters to the DFDP, helps define the most recent dynamics of the fault, and possibly refine slip-rates and recurrence estimates of the AFZ.

  2. Evaluation des fluides de forage HP/HT pour forages profonds Evaluation of Hp/Ht Drilling Fluid Formulations for Deep Drilling

    Directory of Open Access Journals (Sweden)

    Argillier J. F.

    2006-11-01

    nombre de boues à base d'eau. Les résultats font apparaître que la nature des composants de la formulation exerce une forte influence sur le comportement de la boue dans des conditions difficiles. Le choix approprié d'additifs, tels que viscosifiants et réducteurs de filtrat, peut limiter les risques inhérents aux conditions de forage difficiles. Deep well drilling require the development of drilling fluid formulations adapted to high formation temperatures : a major cause of problems is the thermal degradation of chemical additives used in water based formulations that often occurs while drilling high temperature wells. Such a degradation can lead to strong variations in rheological and filtration characteristics and loss of properties. Moreover, even if no degradation of components occurs, the viscosity of hydrosoluble polymer solutions commonly used in fluid formulations strongly decreases as temperature increases above 60°C (150°F. Another cause of problems that arise at high temperature when using water based muds is the gelation of clays used in the formulation. This induces a deep increase in formulation viscosity and pressure drop, in particular when setting back in operation. Different methodologies have been developed for studying the behaviour of water based muds under high pressure/high temperature conditions. They include:(1 laboratory scale experiments such as anaerobic stability of polymer solutions, rheological behaviour of clay suspensions under high pressure/high temperature conditions thus simulating gelification properties of clays at high temperature;studying drilling fluids under realistic bottom hole conditions that are temperatures up to 180°C (380°F, pressures up to 500 bar and shear rates up to 10,000 s to the power of (-1. Using this methodology different water based muds have been tested. The results show that the nature of the constituents used in the water based formulation strongly influences the mud behaviour under harsh

  3. Rheological properties of the synthetic drilling fluid in deep-water drilling conditions%深水钻井条件下合成基钻井液流变性

    Institute of Scientific and Technical Information of China (English)

    岳前升; 刘书杰; 何保生; 李玉光; 胡友林

    2011-01-01

    The synthetic drilling fluid system is currently widely applied in deep-water drilling operation.Meanwhile,the low temperature rheological property of the synthetic drilling fluid was one of the problems widely concerned in deep-water drilling.The present paper investigated effects of various factors,such as emulsifier types,organic clay addition,oil-to-water ratio and mud density,on the low temperature rheological property of the liner α-olefin synthetic drilling fluid by measuring its viscosity-temperature properties at different compositions.Then, the paper discussed the influence of base-oil types and viscosity on viscosity-temperature properties of the water-in-oil drilling fluid.The experimental results demonstrated that the low temperature rheological property of the liner α-olefin synthetic drilling fluid was significantly influenced by the emulsifier type, followed in turn by organic-clay addition and oil-to-water ratio,while weighting materials affected the low temperature rheological property of the synthetic drilling fluid much less.The low temperature viscosity of base oil was most decisive to the viscosity of the deep-water synthetic drilling fluid system.The liner a-olefin synthetic drilling fluid was superior to the mineral-oil-base and gas to liquid-base drilling fluids in low temperature flowability,being applicable to deep-water drilling operation.%目前合成基钻井液体系在深水钻井中应用比较广泛,其低温流动性也成为深水钻井中较受关注的问题.通过测定线性α-烯烃合成基钻井液在不同组成时的黏度-温度特性,研究了乳化剂种类、有机土加量、油水比以及钻井液密度等对合成基钻井液低温流动性影响,探讨了基油种类和黏度对油包水钻井液的黏度-温度特性影响.实验结果表明,乳化剂种类是影响线性α-烯烃合成基钻井液低温流动性的最主要因素,其次是有机土加量和油水比,而加重材料对合成基钻井液低

  4. Nash and integrated solutions in a just-in-time seller-buyer supply chain with buyer's ordering cost reductions

    Science.gov (United States)

    Lou, Kuo-Ren; Wang, Lu

    2016-05-01

    The seller frequently offers the buyer trade credit to settle the purchase amount. From the seller's prospective, granting trade credit increases not only the opportunity cost (i.e., the interest loss on the buyer's purchase amount during the credit period) but also the default risk (i.e., the rate that the buyer will be unable to pay off his/her debt obligations). On the other hand, granting trade credit increases sales volume and revenue. Consequently, trade credit is an important strategy to increase seller's profitability. In this paper, we assume that the seller uses trade credit and number of shipments in a production run as decision variables to maximise his/her profit, while the buyer determines his/her replenishment cycle time and capital investment as decision variables to reduce his/her ordering cost and achieve his/her maximum profit. We then derive non-cooperative Nash solution and cooperative integrated solution in a just-in-time inventory system, in which granting trade credit increases not only the demand but also the opportunity cost and default risk, and the relationship between the capital investment and the ordering cost reduction is logarithmic. Then, we use a software to solve and compare these two distinct solutions. Finally, we use sensitivity analysis to obtain some managerial insights.

  5. Hybrid Metaheuristics for the Unrelated Parallel Machine Scheduling to Minimize Makespan and Maximum Just-in-Time Deviations

    Directory of Open Access Journals (Sweden)

    Chiuh Cheng Chyu

    2012-06-01

    Full Text Available This paper studies the unrelated parallel machine scheduling problem with three minimization objectives – makespan, maximum earliness, and maximum tardiness (MET-UPMSP. The last two objectives combined are related to just-in-time (JIT performance of a solution. Three hybrid algorithms are presented to solve the MET-UPMSP: reactive GRASP with path relinking, dual-archived memetic algorithm (DAMA, and SPEA2. In order to improve the solution quality, min-max matching is included in the decoding scheme for each algorithm. An experiment is conducted to evaluate the performance of the three algorithms, using 100 (jobs x 3 (machines and 200 x 5 problem instances with three combinations of two due date factors – tight and range. The numerical results indicate that DAMA performs best and GRASP performs second for most problem instances in three performance metrics: HVR, GD, and Spread. The experimental results also show that incorporating min-max matching into decoding scheme significantly improves the solution quality for the two population-based algorithms. It is worth noting that the solutions produced by DAMA with matching decoding can be used as benchmark to evaluate the performance of other algorithms.

  6. Evaluating Distribution Process of a Supply Chain in Just-in-Time Environment Using Application of Graph Theory

    Directory of Open Access Journals (Sweden)

    Om Prakash Mishra

    2013-12-01

    Full Text Available Distribution process of a supply chain management is very important and strategic. To stay efficient in delivering the finished goods in the hands of end user, the speed and responsiveness of distribution mechanism are most essential. Just in Time (JIT has proved result oriented in the manufacturing systems since 1985. Since then its applicability in several fields are being investigated. Low inventory, small lot size, least lead time and quality product are some desirable features of JIT, which proves beneficiary to the firm. This paper highlights JIT applied distribution process in order to shorten the lead time, inventory holding costs. Application of Graph theory (GTA methodology has been used to investigate the interdependencies of dimensions and its attributes of JIT implemented distribution. Then an empirical value of JIT distribution process (JDP of an organisation has been derived , subsequently coefficient of distribution dissimilarity and similarity have been found for two organisation and based on these values comparison 0f any two organisation can be done. Approach can be used to know the lacks of various organizations based on their feasibility index of transition (FIT value and which is required to develop to transform the organisation applying JIT in distribution process.

  7. An Account for Implementing Just-in-time: A Case Study of the Automotive Industry in China

    Directory of Open Access Journals (Sweden)

    Bo Hou

    2013-07-01

    Full Text Available Just-in-time (JIT has been a popular operation strategy partly because of its success in the japanese automobile industry. Various benefits such as inventory reduction, improved operations efficiency, and faster response, have been studied widely in previous studies. Therefore, successful implementation of JIT is vital to many companies. This research makes use of a case study to explore five key research themes, which are information system, production planning, inventory management, quality management, and suppliers management, and the success factors surrounding implementation of JIT for an automotive company. This case study also provides evidences for supporting the benefits of employing JIT. Semi-structured interviews were conducted to collect relevant data. The research finding indicates that JIT system is crucial for the success of automobile companies, and operates JIT system can lead to many advantages to the case company. The major contribution of this paper lies in the discussions of the successful factors as a practical guide to implement JIT systems.

  8. Recognition of Handwritten Textual Annotations using Tesseract Open Source OCR Engine for information Just In Time (iJIT)

    CERN Document Server

    Rakshit, Sandip; Ikeda, Hisashi

    2010-01-01

    Objective of the current work is to develop an Optical Character Recognition (OCR) engine for information Just In Time (iJIT) system that can be used for recognition of handwritten textual annotations of lower case Roman script. Tesseract open source OCR engine under Apache License 2.0 is used to develop user-specific handwriting recognition models, viz., the language sets, for the said system, where each user is identified by a unique identification tag associated with the digital pen. To generate the language set for any user, Tesseract is trained with labeled handwritten data samples of isolated and free-flow texts of Roman script, collected exclusively from that user. The designed system is tested on five different language sets with free- flow handwritten annotations as test samples. The system could successfully segment and subsequently recognize 87.92%, 81.53%, 92.88%, 86.75% and 90.80% handwritten characters in the test samples of five different users.

  9. Impact of Just-in-Time and Just-in-Place Simulation on Intern Success With Infant Lumbar Puncture.

    Science.gov (United States)

    Kessler, David; Pusic, Martin; Chang, Todd P; Fein, Daniel M; Grossman, Devin; Mehta, Renuka; White, Marjorie; Jang, Jaewon; Whitfill, Travis; Auerbach, Marc

    2015-05-01

    Simulation-based skill trainings are common; however, optimal instructional designs that improve outcomes are not well specified. We explored the impact of just-in-time and just-in-place training (JIPT) on interns' infant lumbar puncture (LP) success. This prospective study enrolled pediatric and emergency medicine interns from 2009 to 2012 at 34 centers. Two distinct instructional design strategies were compared. Cohort A (2009-2010) completed simulation-based training at commencement of internship, receiving individually coached practice on the LP simulator until achieving a predefined mastery performance standard. Cohort B (2010-2012) had the same training plus JIPT sessions immediately before their first clinical LP. Main outcome was LP success, defined as obtaining fluid with first needle insertion and intern success rates with infant LP are poor. Despite improving process measures, adding JIPT to training bundles did not improve success rate. More research is needed on optimal instructional design strategies for infant LP. Copyright © 2015 by the American Academy of Pediatrics.

  10. Just-in-Time Adaptive Interventions (JITAIs) in Mobile Health: Key Components and Design Principles for Ongoing Health Behavior Support.

    Science.gov (United States)

    Nahum-Shani, Inbal; Smith, Shawna N; Spring, Bonnie J; Collins, Linda M; Witkiewitz, Katie; Tewari, Ambuj; Murphy, Susan A

    2016-09-23

    The just-in-time adaptive intervention (JITAI) is an intervention design aiming to provide the right type/amount of support, at the right time, by adapting to an individual's changing internal and contextual state. The availability of increasingly powerful mobile and sensing technologies underpins the use of JITAIs to support health behavior, as in such a setting an individual's state can change rapidly, unexpectedly, and in his/her natural environment. Despite the increasing use and appeal of JITAIs, a major gap exists between the growing technological capabilities for delivering JITAIs and research on the development and evaluation of these interventions. Many JITAIs have been developed with minimal use of empirical evidence, theory, or accepted treatment guidelines. Here, we take an essential first step towards bridging this gap. Building on health behavior theories and the extant literature on JITAIs, we clarify the scientific motivation for JITAIs, define their fundamental components, and highlight design principles related to these components. Examples of JITAIs from various domains of health behavior research are used for illustration. As we enter a new era of technological capacity for delivering JITAIs, it is critical that researchers develop sophisticated and nuanced health behavior theories capable of guiding the construction of such interventions. Particular attention has to be given to better understanding the implications of providing timely and ecologically sound support for intervention adherence and retention.

  11. Case study evaluating Just-In-Time Teaching and Peer Instruction using clickers in a quantum mechanics course

    Science.gov (United States)

    Sayer, Ryan; Marshman, Emily; Singh, Chandralekha

    2016-12-01

    Just-in-Time Teaching (JiTT) is an instructional strategy involving feedback from students on prelecture activities in order to design in-class activities to build on the continuing feedback from students. We investigate the effectiveness of a JiTT approach, which included in-class concept tests using clickers in an upper-division quantum mechanics course. We analyze student performance on prelecture reading quizzes, in-class clicker questions answered individually, and clicker questions answered after group discussion, and compare those performances with open-ended retention quizzes administered after all instructional activities on the same concepts. In general, compared to the reading quizzes, student performance improved when individual clicker questions were posed after lectures that focused on student difficulties found via electronic feedback. The performance on the clicker questions after group discussion following individual clicker question responses also showed improvement. We discuss some possible reasons for the improved performance at various stages, e.g., from prelecture reading quizzes to postlecture clicker questions, and from individual to group clicker questions.

  12. PERBAIKAN KEBIJAKAN PENGENDALIAN PERSEDIAAN JUST IN TIME KOMPONEN PRODUK MAIN FLOOR SIDE LH PADA PT GAYA MOTOR

    Directory of Open Access Journals (Sweden)

    Bella Suciana Istiqomah

    2015-06-01

    Full Text Available PT . Gaya Motor is a manufacturing company that is engaged in the assembly and production of automotive components incorporated in the group of PT Astra International.Perusahaan implement inventory control system Just In Time.Kanban’s supplier with safety stock of 0.5 days plus a safety stock of 0.5 extra days beyond the kanban. The study was conducted on the material supply products Main Floor Side LH SA - 001 , SA - 002 , SA - 003 , SA - 004 , SA - 005 , SA - 006 , SA - 007 , SA - 008 and SA - 009. Problems faced by the company are the high amount of inventory caused by inaccurate inventory systems and fault current in raw material procurement procedures. The purpose of this study was to evaluate the company's current inventory control system and propose improvements inventory control system that can minimize inventory costs compared to the cost of inventory at the company's current inventory system.Kanban inventory method supplier company currently has a total cost of inventory of Rp 318.861.462,00. Supplier kanban inventory control methods with safety stock kanban 0.1 days has a total cost of inventory of Rp 158.703.378,00. Inventory control methods Two - Bin Replenishment has a total inventory cost of Rp 98.497.214,00. From the results of these calculations, the minimum inventory cost obtained by using the method of inventory Two - Bin Replenishment, and made proposals related to changes in inventory control system.

  13. Initial report on drilling into seismogenic zones of M2.0 - M5.5 earthquakes from deep South African gold mines (DSeis)

    Science.gov (United States)

    Ogasawara, Hiroshi; Durrheim, Raymond; Yabe, Yasuo; Ito, Takatoshi; van Aswegen, Gerrie; Grobbelaar, Michelle; Funato, Akio; Ishida, Akimasa; Ogasawara, Hiroyuki; Mngadi, Siyanda; Manzi, Musa; Ziegler, Martin; Ward, Tony; Moyer, Pamela; Boettcher, Margaret; Ellsworth, Bill; Liebenberg, Bennie; Wechsler, Neta; Onstott, Tullis; Berset, Nicolas

    2017-04-01

    The International Continental Scientific Drilling Program (ICDP) approved our proposal (Ogasawara et al., EGU 2016) to drill into and around seismogenic zones where critically stressed faults initiated ruptures at depth. The drilling targets include four ruptures equivalent to M2.0, 2.8, 3.5, and 5.5 that dynamically and quasi-statically evolved in 2.9 Ga hard rock in the Witwatersrand basin, South Africa. Major advantages of our drilling locations are the large quantity and high-quality of existing data from dense seismic arrays both on surface and near-field underground in three deep South African gold mines. Additionally, the great depths (1.0 to 3.3 km from surface) to collar holes reduce drilling costs significantly and enable a larger number of holes to be drilled. Flexibility in drilling direction will also allow us to minimize damage in borehole or drilled cores. With the ICDP funds, we will conduct full-core drilling of 16 holes with drilling ranges from 50 to 750 m to recover both materials and fractures in and around the seismogenic zones, followed by core and borehole logging. Additional in-hole monitoring at close proximity will be supported by co-mingled funds and will follow the ICDP drilling. Expected magnitudes of maximum shear stress are several tens of MPa. We have established an overcoring procedure to measure 3D-stress state for adverse underground working conditions so as not to interfere with mining operations. This procedure was optimized based on the Compact Conic-ended Borehole Overcoring (CCBO) technique (ISRM suggested; Sugawara and Obara, 1999). Funato and Ito (2016 IJRMMS) developed a diametrical core deformation analysis (DCDA) method to measure differential stress using only drilled core by assuming diametrical change with roll angles caused by elastic in-axisymmetrical expansion during drilling. A gold mine has already drilled a hole to intersect the hypocenter of a 2016 M3.5 earthquake and carried out the CCBO stress measurement in

  14. Fractures in the deep critical zone characterized by drilling and geophysics in the Laramie Range, Wyoming

    Science.gov (United States)

    Hayes, J. L.; Holbrook, W. S.; Carr, B.; Flinchum, B. A.; Rempe, D.; Novitsky, C. G.; Dewey, J.

    2016-12-01

    Fractures are linked to many processes that influence the architecture of the deep critical zone; for example, fractures may regulate the influx of meteoric water and thus direct the propagation of chemical weathering. It is therefore important to understand the subsurface distribution of fractures and their control on deep critical zone architecture. Several proposed theoretical frameworks imply that the distribution of fractures in the deep critical zone may vary along hillslopes. Frost cracking models predict variations in cracking intensity depending on aspect and temperature variation. Surface curvature and inherited tectonic fractures may also provide controls on fracture distribution. A recently proposed model combines topographic and tectonic stresses to calculate the lateral distribution of subsurface stress and failure potential, thus implying local and regional controls on the distribution and density of fractures. In light of these models, we use geophysical surveys and observations from boreholes to characterize fractures in the deep critical zone in the Laramie Mountains, Wyoming. Our geophysical results from seismic refraction surveys suggest that local topographic and regional tectonic stresses control the distribution of fractures. This interpretation is supported by borehole measurements, which show that fracture density decreases with depth and is lower beneath valleys than ridges. We estimate fracture density from pixel analysis of amplitude and traveltime acoustic televiewer data, which accounts for fracture aperture. Comparisons of p-wave velocities and fracture density show that increasing seismic velocity (i.e., from 1-4 km/s) corresponds to decreasing fracture density. From optical televiewer images of the borehole we also interpret thick (> 10 cm) weathering zones along fractures in the upper portions of boreholes located on the ridge. This observation emphasizes the complex interplay of chemical and physical processes in shaping the deep

  15. Use of Just in Time Maintenance of Reinforced Concrete Bridge Structures based on Real Historical Data Deterioration Models

    Directory of Open Access Journals (Sweden)

    Abu-Tair A.

    2016-01-01

    Full Text Available Concrete is the backbone of any developed economy. Concrete can suffer from a large number of deleterious effects including physical, chemical and biological causes. Large owning bridge structures organizations are facing very serious questions when asking for maintenance budgets. The questions range from needing to justify the need for the work, its urgency, to also have to predict or show the consequences of delayed rehabilitation of a particular structure. There is therefore a need for a probabilistic model that can estimate the range of service lives of bridge populations and also the likelihood of level of deteriorations it can reached for every incremental time interval. A model was developed for such estimation based on statistical data from actual inspection records of a large reinforced concrete bridge portfolio. The method used both deterministic and stochastic methods to predict the service life of a bridge, using these service lives in combination with the just in time (JIT principle of management would enable maintenance managers to justify the need for action and the budgets needed, to intervene at the optimum time in the life of the structure and that of the deterioration. The paper will report on the model which is based on a large database of deterioration records of concrete bridges covering a period of over 60 years and include data from over 400 bridge structures. The paper will also illustrate how the service life model was developed and how these service lives combined with the JIT can be used to effectively allocate resources and use them to keep a major infrastructure asset moving with little disruption to the transport system and its users.

  16. Interstitial water studies on small core samples, Deep Sea Drilling Project, Leg 3

    Science.gov (United States)

    Manheim, F. T.; Chan, K.M.; Kerr, D.; Sunda, W.

    1970-01-01

    Eleven samples of fluids which had been squeezed on board ship, and four, packaged sediment samples were received in our laboratories. As in Leg 2, the volumes of fluid available were scanty and did not permit multiple determinations of constituents in many of the samples; in Hole 21 the fluid available sufficed only for refractometer readings (a few tenths of a milliliter). Therefore, analytical scatter is again responsible for partially obscuring variations (and constancy) in the conservative constituents such as sodium. However, on the whole the results confirm the features which appeared in Legs 1 and 2. Central oceanic sediments display a remarkable constancy in total salinity, chlorinity and sodium concentration to the greatest depths and ages yet penetrated in the project drillings. Variations attributable to postburial reactions do occur in the remaining major ions, but they usually show little systematic trend with depth--with the exception of potassium, which will be discussed later. Methods remain similar to those employed for Leg 2; the detailed techniques are now being prepared for submission, but a brief description may be obtained from the previous Leg reports (Manheim and Sayles, 1969; Chan and Manheim, 1970). Results from four unsqueezed samples are not complete and, therefore, do not appear here.

  17. Deep Drilling at Laguna Potrok Aike, Argentina: Recovery of a Paleoclimate Record for the Last Glacial from the Southern Hemisphere

    Science.gov (United States)

    Zolitschka, B.; Anselmetti, F.; Ariztegui, D.; Corbella, H.; Francus, P.; Gebhardt, C.; Hahn, A.; Kliem, P.; Lücke, A.; Ohlendorf, C.; Schäbitz, F.

    2009-12-01

    Laguna Potrok Aike, located in the South-Patagonian province of Santa Cruz (52°58’S, 70°23’W), was formed 770 ka ago by a volcanic (maar) eruption. Within the framework of the ICDP-funded project PASADO two sites were drilled from September to November 2008 using the GLAD800 drilling platform. A total of 513 m of lacustrine sediments were recovered from the central deep basin by an international team. The sediments hold a unique record of paleoclimatic and paleoecological variability from a region sensitive to variations in southern hemispheric wind and pressure systems and thus significant for the understanding of the global climate system. Moreover, Laguna Potrok Aike is close to many active volcanoes allowing a better understanding of the history of volcanism in the Pali Aike Volcanic Field and in the nearby Andean mountain chain. These challenging scientific themes need to be tackled in a global context as both are of increasing socio-economic relevance. On-site core logging based on magnetic susceptibility data documents an excellent correlation between the quadruplicate holes drilled at Site 1 and between the triplicate holes recovered from Site 2. Also, correlation between both sites located 700 m apart from each other is feasible. After splitting the cores in the lab, a reference profile was established down to a composite depth of 107 m for the replicate cores from Site 2. Sediments consist of laminated and sand-layered lacustrine silts with an increasing number of turbidites and homogenites with depth. Below 80 m composite depth two mass movement deposits (10 m and 5 m in thickness) are recorded. These deposits show tilted and distorted layers as well as nodules of fine grained sediments and randomly distributed gravel. Such features indicate an increased slump activity probably related to lake level fluctuations or seismicity. Also with depth coarse gravel layers are present and point to changes in hydrological conditions in the catchment area

  18. The environmental and evolutionary history of Lake Ohrid (FYROM/Albania): interim results from the SCOPSCO deep drilling project

    Science.gov (United States)

    Wagner, Bernd; Wilke, Thomas; Francke, Alexander; Albrecht, Christian; Baumgarten, Henrike; Bertini, Adele; Combourieu-Nebout, Nathalie; Cvetkoska, Aleksandra; D'Addabbo, Michele; Donders, Timme H.; Föller, Kirstin; Giaccio, Biagio; Grazhdani, Andon; Hauffe, Torsten; Holtvoeth, Jens; Joannin, Sebastien; Jovanovska, Elena; Just, Janna; Kouli, Katerina; Koutsodendris, Andreas; Krastel, Sebastian; Lacey, Jack H.; Leicher, Niklas; Leng, Melanie J.; Levkov, Zlatko; Lindhorst, Katja; Masi, Alessia; Mercuri, Anna M.; Nomade, Sebastien; Nowaczyk, Norbert; Panagiotopoulos, Konstantinos; Peyron, Odile; Reed, Jane M.; Regattieri, Eleonora; Sadori, Laura; Sagnotti, Leonardo; Stelbrink, Björn; Sulpizio, Roberto; Tofilovska, Slavica; Torri, Paola; Vogel, Hendrik; Wagner, Thomas; Wagner-Cremer, Friederike; Wolff, George A.; Wonik, Thomas; Zanchetta, Giovanni; Zhang, Xiaosen S.

    2017-04-01

    This study reviews and synthesises existing information generated within the SCOPSCO (Scientific Collaboration on Past Speciation Conditions in Lake Ohrid) deep drilling project. The four main aims of the project are to infer (i) the age and origin of Lake Ohrid (Former Yugoslav Republic of Macedonia/Republic of Albania), (ii) its regional seismotectonic history, (iii) volcanic activity and climate change in the central northern Mediterranean region, and (iv) the influence of major geological events on the evolution of its endemic species. The Ohrid basin formed by transtension during the Miocene, opened during the Pliocene and Pleistocene, and the lake established de novo in the still relatively narrow valley between 1.9 and 1.3 Ma. The lake history is recorded in a 584 m long sediment sequence, which was recovered within the framework of the International Continental Scientific Drilling Program (ICDP) from the central part (DEEP site) of the lake in spring 2013. To date, 54 tephra and cryptotephra horizons have been found in the upper 460 m of this sequence. Tephrochronology and tuning biogeochemical proxy data to orbital parameters revealed that the upper 247.8 m represent the last 637 kyr. The multi-proxy data set covering these 637 kyr indicates long-term variability. Some proxies show a change from generally cooler and wetter to drier and warmer glacial and interglacial periods around 300 ka. Short-term environmental change caused, for example, by tephra deposition or the climatic impact of millennial-scale Dansgaard-Oeschger and Heinrich events are superimposed on the long-term trends. Evolutionary studies on the extant fauna indicate that Lake Ohrid was not a refugial area for regional freshwater animals. This differs from the surrounding catchment, where the mountainous setting with relatively high water availability provided a refuge for temperate and montane trees during the relatively cold and dry glacial periods. Although Lake Ohrid experienced

  19. The SCOPSCO Deep Drilling Project: a 1.3 million-year palaeoenvironmental reconstruction from Lake Ohrid using stable isotopes

    Science.gov (United States)

    Lacey, Jack; Leng, Melanie; Francke, Alexander; Vogel, Hendrik; Zanchetta, Giovanni; Wagner, Bernd

    2017-04-01

    Lake Ohrid is a large, ancient lake situated on the Balkan Peninsula in the central northern Mediterranean region. The lake hosts a world-class degree of endemic biodiversity and an extensive sedimentary archive. In 2013, an extremely successful International Continental scientific Drilling Program deep drilling campaign was conducted as part of the transdisciplinary Scientific Collaboration on Past Speciation Conditions in Lake Ohrid (SCOPSCO) project and recovered over 2100 m of sediment from the lake. The main target site in the central basin provided a 584-m composite record covering at least 1.3 million years. Here, we present new oxygen and carbon isotope data (δ18O and δ13C) from carbonate for the entire lacustrine sequence (upper 430 m) of the SCOPSCO cores spanning Marine Isotope Stages (MIS) 41-1, based on chronological information derived from tephrostratigraphy, palaeomagnetic analyses, and orbital tuning of biogeochemical proxies. Contemporary monitoring data suggest variations in δ18O are primarily a function of changes in regional water balance. This is confirmed through the Holocene where the isotope dataset shows a stable transition from wetter conditions in the Early Holocene to a drier climate in the Late Holocene, which is consistent with a regional pattern of aridification. At the onset of deep-water lacustrine conditions around 1.3 Ma, very low δ18O are comparable to measured values for surface inflow today and infer that Lake Ohrid had a greatly reduced residence time and volume. Multiple rapid shifts to higher values in long-term average δ18O are observed in the early lake history, most likely associated with lake ontogeny and the progressive deepening of Lake Ohrid. After MIS 10, the observed variability between glacial and interglacial δ18O increases dramatically concomitant with a lower reconstructed lake level, suggesting a more pronounced sensitivity to hydroclimate change. A trend to higher interglacial δ18O through this time

  20. The Hans Tausen drill

    DEFF Research Database (Denmark)

    Johnsen, Sigfus Johann; Dahl-Jensen, Dorthe; Steffensen, Jørgen Peder

    2007-01-01

    In the mid-1990s, excellent results from the GRIP and GISP2 deep drilling projects in Greenland opened up funding for continued ice-coring efforts in Antarctica (EPICA) and Greenland (NorthGRIP). The Glaciology Group of the Niels Bohr Institute, University of Copenhagen, was assigned the task...... of providing drilling capability for these projects, as it had done for the GRIP project. The group decided to further simplify existing deep drill designs for better reliability and ease of handling. The drill design decided upon was successfully tested on Hans Tausen Ice Cap, Peary Land, Greenland, in 1995....... The 5.0 m long Hans Tausen (HT) drill was a prototype for the ~11 m long EPICA and NorthGRIP versions of the drill which were mechanically identical to the HT drill except for a much longer core barrel and chips chamber. These drills could deliver up to 4 m long ice cores after some design improvements...

  1. O aprimoramento de um processo produtivo pelo sistema "Just In Time" ajuda uma empresa manufatureira a alcançar vantagem competitiva em custo

    OpenAIRE

    João Murta Alves

    1995-01-01

    Resumo: Trata-se de um estudo da filosofia Just In Time (JIT) de administração da manufatura, focalizando o aprimoramento do processo produtivo - em ganhos de qualidade e produtividade - como estratégia para ajudar uma empresa a alcançar vantagem competitiva em custo. A abordagem é sistêmica, partindo da ênfase da necessidade de se elaborar uma estratégia bem fundamentada no conhecimento da indústria e do seu meio ambiente, passando pelo conhecimento do sistema Just In Time e seus principais ...

  2. 深孔绳索取心钻杆质量控制措施%Quality Control Measures of Wire-line Coring Drill Pipe for Deep Hole

    Institute of Scientific and Technical Information of China (English)

    张丽君; 彭莉; 吕红军

    2012-01-01

      在优化深孔绳索取心钻杆结构设计、选用优质钢材基础上,制定合理的加工工艺和检测规程,配齐相应的检测器具。通过严格的工艺控制,确保钻杆质量稳定,满足深孔绳索取心钻进需要。%  On the basis of the optimization of structure design for deep hole wire-line coring drill pipe and the selection of high quality steel, rational processing technology and detecting rules are established with relative detecting appliances.By the strict process control, the quality of drill pipe is ensured to satisfy the requirements of wire-line coring drilling.

  3. Deep scientific drilling results from Koyna and Killari earthquake regions reveal why Indian shield lithosphere is unusual, thin and warm

    Directory of Open Access Journals (Sweden)

    O.P. Pandey

    2016-09-01

    Full Text Available The nature of crustal and lithospheric mantle evolution of the Archean shields as well as their subsequent deformation due to recent plate motions and sustained intraplate geodynamic activity, has been a subject of considerable interest. In view of this, about three decades ago, a new idea was put forward suggesting that out of all shield terrains, the Indian shield has an extremely thin lithosphere (∼100 km, compared to 250–350 km, elsewhere, apart from being warm, non-rigid, sheared and deformed. As expected, it met with scepticism by heat flow and the emerging seismic tomographic study groups, who on the contrary suggested that the Indian shield has a cool crust, besides a coherent and thick lithosphere (as much as 300–400 km like any other shield. However, recently obtained integrated geological and geophysical findings from deep scientific drillings in 1993 Killari (Mw: 6.3 and 1967 Koyna (Mw: 6.3 earthquake zones, as well as newly acquired geophysical data over other parts of Indian shield terrain, have provided a totally new insight to this debate. Beneath Killari, the basement was found consisting of high density, high velocity mid crustal amphibolite to granulite facies rocks due to exhumation of the deeper crustal layers and sustained granitic upper crustal erosion. Similar type of basement appears to be present in Koyna region too, which is characterized by considerably high upper crustal temperatures. Since, such type of crust is depleted in radiogenic elements, it resulted into lowering of heat flow at the surface, increase in heat flow contribution from the mantle, and upwarping of the lithosphere-asthenosphere boundary. Consequently, the Indian shield lithosphere has become unusually thin and warm. This study highlights the need of an integrated geological, geochemical and geophysical approach in order to accurately determine deep crust-mantle thermal regime in continental areas.

  4. Anthropogenic-enhanced erosion following the Neolithic Revolution in the Southern Levant: Records from the Dead Sea deep drilling core

    Science.gov (United States)

    Lu, Yin; Waldmann, Nicolas; Nadel, Dani; Marco, Shmuel

    2017-04-01

    In addition to tectonics and climatic changes, humans have exerted a significant impact on surface erosion over timescales ranging from years to centuries. However, such kind of impact over millennial timescales remains unsubstantiated. The Dead Sea drainage basin offers a rare combination of well-documented substantial climate change, intense tectonics and abundant archaeological evidence for past human activity in the Southern Levant. It serves as a natural laboratory for understanding how sedimentation rates in a deep basin are related to climate change, tectonics, and anthropogenic impacts on the landscape. Here we show how basin-wide erosion rates are recorded by thicknesses of rhythmic detritus laminae and clastic sediment accumulation rates in a long core retrieved by the Dead Sea Deep Drilling Project in the Dead Sea depocenter. During the last 11.5 kyr the average detrital accumulation rate is 3-4 times that during the last two glacial cycles (MIS 7c-2), and the average thickness of detritus laminae in the last 11.6 kyr is 4.5 times that between 21.7 and 11.6 ka, implying an increased erosion rate on the surrounding slopes during the Holocene. We estimate that this intensified erosion is incompatible with tectonic and climatic regimes during the corresponding time interval and further propose a close association with the Neolithic Revolution in the Levant (beginning at 11.5 ka). We thus suggest that human impact on the landscape was the primary driver causing the intensified erosion and that the Dead Sea sedimentary record serves as a reliable recorder of this impact since the Neolithic Revolution.

  5. Pressure-dependent seismic reflection amplitude changes in crystalline crust: lessons learned at the Continental Deep Drilling Site (KTB)

    Science.gov (United States)

    Beilecke, T.; Bram, K.; Buske, S.

    2010-01-01

    We conducted an active seismic experiment aimed at measuring changes in seismic reflection amplitudes as a consequence of fresh water injection and corresponding pressure changes at the German Continental Deep Drilling site (KTB). The injection took place at the bottom of the 4-km-deep pilot borehole in the SE2 fault zone in crystalline rock units between the springs of 2004 and 2005. Prior to the experiment, theoretical calculations indicated a possible increase in the compressional wave reflection coefficient as a result of an injection-induced reduction of the seismic velocities within the fault zone. Despite good repeatability of the emitted source signals, the experiment suffered from missing the clear reflection signals expected from the fault zone with regard to seismic data from past experiments. Applying various data-processing steps did not enhance the signals enough to obtain clear reflections or even pressure-dependent reflection amplitude changes. The signal-to-noise ratio remains smaller than the effects under observation. Provided that reflections are present in the data, the error bar of the recorded signals is of the order of 100 per cent. Therefore, we conclude that the experiment was not successful in seismically measuring pressure variations. However, important lessons for land seismic time-lapse measurements in crystalline environments have been learned: (i) The source should be capable of emitting frequencies below 30 Hz. (ii) The detector array setup proved to be partly questionable because in a scattering environment like the crystalline rocks at the KTB site, the incidence of a plane wave precondition might be violated for high-frequency signals. (iii) Near-surface variations of elastic properties likely influence seismic monitoring. (iv) Using a step function, that is a first-order pressure discontinuity, to model the subsurface pressure build-up, is very likely too simple an approach.

  6. Deep scientific drilling results from Koyna and Killari earthquake regions reveal why Indian shield lithosphere is unusual, thin and warm

    Institute of Scientific and Technical Information of China (English)

    O.P. Pandey

    2016-01-01

    The nature of crustal and lithospheric mantle evolution of the Archean shields as well as their subse-quent deformation due to recent plate motions and sustained intraplate geodynamic activity, has been a subject of considerable interest. In view of this, about three decades ago, a new idea was put forward suggesting that out of all shield terrains, the Indian shield has an extremely thin lithosphere (w100 km, compared to 250e350 km, elsewhere), apart from being warm, non-rigid, sheared and deformed. As expected, it met with scepticism by heat flow and the emerging seismic tomographic study groups, who on the contrary suggested that the Indian shield has a cool crust, besides a coherent and thick lithosphere (as much as 300e400 km) like any other shield. However, recently obtained integrated geological and geophysical findings from deep scientific drillings in 1993 Killari (Mw: 6.3) and 1967 Koyna (Mw: 6.3) earthquake zones, as well as newly acquired geophysical data over other parts of Indian shield terrain, have provided a totally new insight to this debate. Beneath Killari, the basement was found consisting of high density, high velocity mid crustal amphibolite to granulite facies rocks due to exhumation of the deeper crustal layers and sustained granitic upper crustal erosion. Similar type of basement appears to be present in Koyna region too, which is characterized by considerably high upper crustal temperatures. Since, such type of crust is depleted in radiogenic elements, it resulted into lowering of heat flow at the surface, increase in heat flow contribution from the mantle, and upwarping of the lithosphere-asthenosphere boundary. Consequently, the Indian shield lithosphere has become unusually thin and warm. This study highlights the need of an integrated geological, geochemical and geophysical approach in order to accurately determine deep crust-mantle thermal regime in continental areas.

  7. 2.8 Million Years of Arctic Climate Change from Deep Drilling at Lake El'gygytgyn, NE Russia

    Science.gov (United States)

    Melles, M.; Brigham-Grette, J.; Minyuk, P.; Wennrich, V.; Nowaczyk, N.; DeConto, R.; Anderson, P.; Andreev, A.; Haltia-Hovi, E.; Kukkonen, M.; Lozhkin, A.; Rosén, P.; Tarasov, P.

    2012-12-01

    Scientific deep drilling at Lake El'gygtygyn in Chukotka, northeastern Russia (67.5 °N, 172 °E) revealed the first high-resolution record of environmental history in the Arctic that spans the past 2.8 Ma continuously (Melles et al. 2012). In this presentation we focus on the end-member glacial and interglacial climatic conditions during this period as clearly reflected in the pelagic lake sediments recovered. Peak glacial conditions, when mean annual air temperatures at least 4 (± 0.5) °C lower than today led to perennial lake ice (Nolan 2012), first appeared at Lake El'gygytgyn 2.602 - 2.598 Ma ago, during marine isotope stage (MIS) 104. These pervasive glacial episodes gradually increase in frequency from ~2.3 to ~1.8 Ma, eventually concurring with all glacials and several stadials reflected globally in stacked marine isotope records. Particularly warm interglacials, in contrast, experienced a long ice-free season and enhanced nutrient supply from the catchment, which allowed for significantly higher primary production than today. These settings were most pronounced for MIS 11c, 31, 49, 55, 77, 87, 91, and 93. Their exceptional character becomes evident based upon pollen-based climate reconstructions in selected interglacials, showing that the mean temperature of the warmest month and the annual precipitation during the thermal maxima of MIS 11c and 31 ("super" interglacials) were 4-5 °C and ~300 mm higher than those of MIS 1 and 5e ("normal" interglacials), respectively. According to climate simulations, the exceptional warm and moist climates at least during MIS 11c cannot be explained by the natural variability in Earth's orbital parameters and greenhouse gas concentrations alone. A remarkable coincidence of the super interglacials at Lake El'gygytgyn with diatomite layers in the Antarctic ANDRILL 1B, which reflect periods of a diminished West Antarctic Ice Sheet (WAIS) (Naish et al. 2009, Pollard and DeConto 2009), suggests intra-hemispheric climate

  8. 深孔钻床实验设备的数控化改造%CNC Deep Hole Drilling Machine Transformation of Laboratory Equipment

    Institute of Scientific and Technical Information of China (English)

    于宾

    2013-01-01

    This paper mainly discusses laboratory equipment CNC Deep Hole Drilling Machine transformation design. CNC experimental device is a simple CNC equipment. Simple workpiece can be machined to achieve the demonstration teaching role. The transformation starts on the main design features of Deep Hole Drilling, the servo system and CNC system choice selection.%  本文主要论述深孔钻床实验设备的数控化改造的设计。数控实验装置是一台简易的数控设备。可以加工简单的工件,达到演示教学的作用。本次改造设计中主要是围绕深孔加工的特点,伺服系统的选择和数控系统的选择展开论述。

  9. 基于枪钻的薄壁深孔加工工艺设计%Thin-walled Deep-hole Processing Design Based on Gun Drill

    Institute of Scientific and Technical Information of China (English)

    张文强; 宋清俊

    2016-01-01

    在分析热交换板的深孔特点和枪钻加工工艺的基础上,提出了通过减小刀具径向切削力、增加导向条长度和增大薄壁处强度来改善薄壁深孔加工中孔轴线偏斜问题的加工方法,依此设计了4种枪钻加工工艺方法,并通过试验进行了对比,获得了理想的加工效果。%Based on the analysis of the deep⁃hole characteristics of heat exchange plate and gun drill processing, processing meth⁃ods were put forward to improve axial deviation of holes in thin⁃walled deep holes drilling by reducing radial cutting force of tool, in⁃creasing the length of guide block and increasing thin⁃walled position strength. Four gun drill processing methods were designed. These methods were compared by drilling experiments, and ideal drilling effect was obtained.

  10. Typical Toddlers' Participation in "Just-in-Time" Programming of Vocabulary for Visual Scene Display Augmentative and Alternative Communication Apps on Mobile Technology: A Descriptive Study.

    Science.gov (United States)

    Holyfield, Christine; Drager, Kathryn; Light, Janice; Caron, Jessica Gosnell

    2017-08-15

    Augmentative and alternative communication (AAC) promotes communicative participation and language development for young children with complex communication needs. However, the motor, linguistic, and cognitive demands of many AAC technologies restrict young children's operational use of and influence over these technologies. The purpose of the current study is to better understand young children's participation in programming vocabulary "just in time" on an AAC application with minimized demands. A descriptive study was implemented to highlight the participation of 10 typically developing toddlers (M age: 16 months, range: 10-22 months) in just-in-time vocabulary programming in an AAC app with visual scene displays. All 10 toddlers participated in some capacity in adding new visual scene displays and vocabulary to the app just in time. Differences in participation across steps were observed, suggesting variation in the developmental demands of controls involved in vocabulary programming. Results from the current study provide clinical insights toward involving young children in AAC programming just in time and steps that may allow for more independent participation or require more scaffolding. Technology designed to minimize motor, cognitive, and linguistic demands may allow children to participate in programming devices at a younger age.

  11. Researches and Applications of Just-in-time Knowledge Management in Foreign Countries%国外实时知识管理研究与应用

    Institute of Scientific and Technical Information of China (English)

    李欢

    2015-01-01

    介绍了实时知识管理的产生背景、含义及其与传统知识管理相比所具有的先进性;指出了实时知识管理在国外医疗中得以快速发展的原因主要是医疗机构实施实时知识管理具有的紧迫性,以及医疗机构中的程序化决策。以美国 Partner HealthCare为例,介绍了实时知识管理系统的运行方式。%The paper introduces the background and implication of just-in-time knowledge management as well as its advantages over traditional knowledge management. It points out that the main causes of rapid development of just-in-time knowledge management in foreign medical treatment are urgency of implementing just-in-time knowledge management and programmed decision making in medical institutions. And it takes American Partner HealthCare for example to introduce the operation mode of just-in-time knowledge management system.

  12. Downhole fluid sampling and noble gas analysis of saline waters from the Outokumpu Deep Drill Hole, Finland

    Science.gov (United States)

    Wiersberg, Thomas; Kietäväinen, Riikka; Ahonen, Lasse; Kukkonen, Ilmo; Niedermann, Samuel

    2014-05-01

    The 2516 m deep Outokumpu Deep Drill Hole is situated at the NW-SE trending boundary between the Archaean and Proterozoic domains of the eastern Fennoscandian Shield (Finland). In August 2011, eight fluid samples were collected with a Leutert positive displacement sampler (PDS) from 500 m to 2480 m depth in the open bore hole. The PDS allows sampling at in situ pressures, thus minimising fractionation from degassing during sampling. At the surface, the samples were transferred into an evacuated sampling line connected with a Cu-tube and a glass bulb for gas sampling, a pressure gauge, and a thermometer. Gas was liberated with a heated ultrasonic bath and then admitted to the sampling devices. Gas/water ratios were already determined in the field during gas extraction. Saline groundwaters rich in methane, nitrogen, hydrogen and helium and with water stable isotope composition distinctive from meteoric and sea water have been found to host isolated ecosystems within the Precambrian crystalline bedrock of Outokumpu (Kietäväinen et al., 2013). In order to characterise the geochemical and microbiological evolution of the deep subsurface of the area, noble gas residence times have been calculated based on radiogenic (4He, 40Ar), nucleogenic (21Ne) and fissiogenic (134Xe, 136Xe) noble gas nuclides. Geochemical and microbiological variations together with hydrogeological and geophysical data indicate negligible vertical fluid flow in the bedrock. Moreover, noble gas diffusion models show that diffusion is not likely to affect noble gas concentrations of groundwater at or below 500 m depth in Outokumpu. Therefore in situ accumulation was assumed as a basis for the age determination. In general, residence times between 10 and 50 Ma were indicated by 4He and21Ne, while somewhat younger ages were obtained by 40Ar, using average values for porosity, density and concentration of radioactive elements in the bedrock of Outokumpu. Kietäväinen R., Ahonen L., Kukkonen I

  13. The Iceland Deep Drilling Project: (III) Evidence for amphibolite grade contact metamorphism in an active geothermal system

    Science.gov (United States)

    Marks, N.; Schiffman, P.; Zierenberg, R. A.; Franzson, H.

    2008-12-01

    One of the scientific goals of the Iceland Deep Drilling Project is to reach the depths of transition from greenschist to amphibolite grade metamorphism in an active geothermal system. The deepest borehole to date in the Reykjanes system is RN-17, which was drilled to a depth of 3082 m. This well had been considered as a candidate for deepening by the IDDP until it collapsed during a flow test in November 2005. Temperatures in the lower portion of the borehole were never recorded due to an obstruction at 2100 m depth, but are estimated to be approximately 340°C. Epidote, albite, and actinolite are ubiquitous within pillow basalt, hyaloclastite, and in veins, implying that greenschist grade conditions have been attained throughout much of the well below approximately 1200 m. Intrusive lithologies constitute approximately 50% of the observed cuttings between 2600 and 2700 m. These intrusive rocks have produced small, but recognizable contact metamorphic effects characterized by granoblastic hornfels consisting of amphibolite grade assemblages of quartz + anorthite + diopside + magnetite + titanite. These have, in turn, been locally cut by actinolite veins, presumably reflective of the present-day, thermal state of the hydrothermal system at these depths. Based on their siliceous bulk composition, we believe the hornfels represent the thermally- recrystallized products of earlier-formed, hydrothermal veins consisting of quartz, epidote, and actinolite. The metamorphic plagioclase is distinctly more anorthitic (An90 to An98) than igneous plagioclase in adjacent mafic intrusives (An33 to An80) and also exhibits consistently lower Mg content and higher iron (up to 2.07 wt.% as Fe2O3). Stoichiometry implies that much of the iron in hydrothermal anorthite is Fe3+, which may imply recrystallization from precursor epidote under relatively oxidizing conditions. Diopside compositions (average Wo0.48En0.27Fs0.25) are consistently less calcic than hydrothermal clinopyroxenes

  14. The ultrasonic detection system for the drilling process of deep holes%深孔钻削过程中的超声监测系统

    Institute of Scientific and Technical Information of China (English)

    马清艳; 王彪

    2012-01-01

    由于深孔在封闭或半封闭的状况下进行,钻头的走偏情况无法直接观察,以致于无法保证产品的加工质量,采用工控机、PLC和超声检测技术相结合,设计深孔在线超声监测系统,根据壁厚可以实时检测刀具的走偏情况,为深孔加工提供重要理论依据.%Due to the deep hole is processing in the closed or semi-closed state,the slant state of drill will not be directly monitored and the product quality will not be assured,based on IPC and PLC,ul-trasonic technique is adopted,the real-time detection system for the drilling process of deep holes is estab-lished,wall thickness of work piece will be detected, which can real-time detect the slant state of drill and lay a good foundation for the processing quality of deep hole.

  15. Interstitial water studies on small core samples, Deep Sea Drilling Project, Leg 6

    Science.gov (United States)

    Manheim, F. T.; Sayles, F.L.

    1971-01-01

    Sediments from Leg 6 sites, west of the Hawaiian Islands, consisted primarily of various combinations of deep-sea biogenic oozes, volcanic ash, and its breakdown products. Pore fluids from most of the sites were similar in composition to present day ocean water, and in some sties almost identical. However, interstitial fluids from Site 53 (Philippine Sea) showed changes in ionic composition which were beyond those previously considered attributable to diagenetic influence. These samples show the beginnings of metamorphism by dramatic increases in calcium concentrations and corresponding decreases in alkali concentrations. Analytical methods were similar to those outlined in previous Leg Reports. However, obvious contamination of aliquots for sodium determination in the laboratory made it necessary to determine all sodium values by difference between anion and cation balances. These values are, if anything, more accurate than direct determinations which have been discussed in earlier legs. However, the authors will continue to analyze sodium directly, and in the future they may be able to improve the precision of the determinations to the point where small losses and gains of sodium in the pore fluids may be established accurately. Agreement between colorimetric and spectrometric determinations of silicon has improved, but there are still occasional marked differences for which the writers have no explanation. T. Takahashi has allowed the authors to compare total Carbon Dioxide (CO2) measurements from his laboratory with their alkalinity determinations: both sets of data were obtained from fluids from the same squeezings of sediments and should give similar values at the indicated pH levels. Some disturbingly large discrepancies in the two sets of data are evident. The authors do not think that their back-titration alkalinity technique alone is responsible for the differences. However, they have not evaluated the possible influence of the heat-sealed polyethylene

  16. PASADO - ICDP Deep Drilling at Laguna Potrok Aike (Argentina): A 50 ka Record of Increasing Environmental Dynamics

    Science.gov (United States)

    Zolitschka, Bernd; Anselmetti, Flavio; Ariztegui, Daniel; Francus, Pierre; Gebhardt, Catalina; Kliem, Annette Hahn Pierre; Lücke, Andreas; Ohlendorf, Christian; Schäbitz, Frank; Wastegard, Stefan

    2010-05-01

    Laguna Potrok Aike, located in the South-Patagonian province of Santa Cruz (52°58'S, 70°23'W), was formed by a volcanic (maar) eruption in the late Quaternary Pali Aike Volcanic Field several hundred thousand years ago. This archive holds a unique record of paleoclimatic and paleoecological variability from a region sensitive to variations in southern hemispheric wind and pressure systems, which provide a significant cornerstone for the understanding of the entire global climate system. Moreover, Laguna Potrok Aike is close to many active volcanoes allowing a better understanding of the history of volcanism in the Pali Aike Volcanic Field as well as in the Andean mountain chain, the latter located in a distance of less than 150 km to the west. Finally, Patagonia is the source region of eolian dust blown from the South American continent into the South Atlantic and onto the Antarctic ice sheet. The currently ongoing global climate change, the thread of volcanic hazards as well as of regional dust storms are of increasing socio-economic relevance and thus challenging scientific themes that are tackled for southernmost South America with an interdisciplinary research approach in the framework of the ICDP-funded "Potrok Aike Maar Lake Sediment Archive Drilling Project" (PASADO). Using the GLAD800 drilling platform seven holes were drilled in the southern spring of 2008. A total of 510 m of lacustrine sediments were recovered by an international scientific team from the central 100 m deep basin with an excellent core recovery rate of 94.4%. The reference profile with a composite depth of 106 m consists of undisturbed laminated and sand-layered lacustrine silts with an increasing number of coarse gravel layers, turbidites and homogenites with depth. Below 80 m composite depth two mass-movement deposits (10 m and 5 m in thickness) are recorded. These deposits show tilted and distorted layers as well as nodules of fine-grained sediments and randomly distributed gravel

  17. Just-in-Time Teaching教学模式在高职课程改革中的应用%The application of the teaching mode "Just-in-Time Teaching" in higher vocational curriculum reform

    Institute of Scientific and Technical Information of China (English)

    陈扬; 李永红

    2015-01-01

    This paper first introduces the JiTT teaching mode's connotation, features and implementation steps. The higher vocational engineering technology specialized core curriculum "construction technology" as an example, discusses the JiTT teaching mode in higher vocational curriculum reform, the application of information technology and vocational courses deep integration provides the basis of the theory and practice.%本文先介绍了JiTT教学模式的内涵、特征与实施步骤.再以高职建筑工程技术专业核心课程《建筑施工技术》为例,探讨了JiTT教学模式在高职课程改革中的应用,为信息技术与高职课程深层次融合提供了理论和实践的依据.

  18. 航天产品准时装配管理技术研究%Research on the Management Technologies of Just - in - Time Assembly for Aerospace Products

    Institute of Scientific and Technical Information of China (English)

    端存真; 薛善良; 李建平; 马继红; 杨年宝

    2012-01-01

    An aerospace assembly plant is still employing the traditional productive management. In order to a-chieve informatization of assembling productive management, it introduces just - in - time assembly management technology for aerospace products, presents a just - in - time assembling system for aerospace products and Kan-ban management, describes the standardizing operation, equalization of production, rational arrangement of e-quipment, multi - skill operator and full - scale quality management. According to Java EE standards, it analyzes just - in - time assembly management requirements such as function modules, implementation of assembly dispatching, assembly process Kanban, material distribution Kanban, and assembly quality Kanban, etc. , develops the just - in - time assembly management system.%某航天装配车间生产管理仍是传统的生产管理方式,为了实现装配生产管理的信息化,研究了航天产品准时装配管理技术.引入丰田生产方式中“准时生产”技术,建立以一个流生产和看板管理为实施基础,以标准化作业、生产均衡化、设备合理布置、多技能作业员和全面质量管理为实施手段的航天产品准时装配体系.分析准时装配管理系统需求,并按照Java EE标准设计包括装配派工执行、装配进度看板、物料配送看板和装配质量看板等功能模块,最后开发了航天产品准时装配管理系统原型.

  19. A chronicle of just-in-time information: The secret to building first year university student wellbeing and resilience based on a three year initiative

    Directory of Open Access Journals (Sweden)

    Donnalee Taylor

    2016-10-01

    Full Text Available To date, little has been published on the provision of student-driven just-in-time information to support first year students. This chronicle of just-in-time curricular and extra-curricular student support information was designed early in 2014 and successfully disseminated to first year biomedical science students over three years at James Cook University, Townsville, Queensland, Australia. In 2016, the information was redeveloped to make the support information electronically available to a much broader student audience. This article provides a dissemination template of what just-in-time curricular and extra-curricular information is required by first year university students. In addition, it outlines how students’ need for this information was determined and how information was successfully created and disseminated over these three years to assist the students in their transition to and through university. The intention of this article is to contribute to the growing body of knowledge on student resilience and wellbeing and to provide a guide for anyone interested in supporting their students in a similar manner.

  20. 深水钻井船高压泥浆系统的设计%Design of High Pressure Mud System of Deep Water Drill Ship

    Institute of Scientific and Technical Information of China (English)

    佟国志; 王帅; 宁俊

    2014-01-01

    Based on DALIAN DEVELOPER drill ship, this paper introduces the design method of high pressure mud system of deep water drill ship and the special requirements during material chosen process. This research provides good experience for the high pressure mud system design of other offshore project.%以“大连开拓者”深水钻井船为例,介绍了深水钻井船高压泥浆系统的设计方法,总结了高压泥浆系统在材料选择时需注意的特殊要求,为其他类似海工产品高压泥浆钻井系统的设计提供了经验。

  1. Palaeo-earthquake events during the late Early Palaeozoic in the central Tarim Basin (NW China: evidence from deep drilling cores

    Directory of Open Access Journals (Sweden)

    He Bizhu

    2014-07-01

    Full Text Available Various millimetre-, centimetre- and metre-scale soft-sediment deformation structures (SSDS have been identified in the Upper Ordovician and Lower-Middle Silurian from deep drilling cores in the Tarim Basin (NW China. These structures include liquefied-sand veins, liquefaction-induced breccias, boudinage-like structures, load and diapir- or flame-like structures, dish and mixed-layer structures, hydroplastic convolutions and seismic unconformities. The deformed layers are intercalated by undeformed layers of varying thicknesses that are petrologically and sedimentologically similar to the deformed layers.

  2. Research and Industrial Application of Drilling Technology of Ultra-deep Wells%超深井钻井技术研究及工业化应用

    Institute of Scientific and Technical Information of China (English)

    张金成; 牛新明; 张进双

    2015-01-01

    陆上油气勘探开发正向着超深层领域发展,中国石化钻遇的超深井普遍存在着压力系统复杂、地层岩性复杂、储层流体复杂、工程力学复杂等工程地质特征。钻井工程面临着设计优化难、施工风险大、钻井速度慢、工程质量控制难度大等技术问题。在钻井施工中表现为钻井周期长、复杂情况和故障多、工程投资大,甚至有些井难以钻达目的层。2005年以来,中国石化石油工程技术研究院联合石油高校、油田企业组成“产—学—研”攻关团队,以川东北、塔里木盆地超深层油气勘探开发为依托,紧密围绕“优质、安全、高效”攻关目标,强化室内模拟和理论分析,加强以新型工具和新材料为载体的技术攻关,强化技术集成应用,研究形成了多信息综合反演钻井地质环境因素精细描述技术、基于钻井工程风险评价的井身结构优化设计方法、大尺寸井眼气体钻井及流体安全转换技术、高效破岩工具及配套技术、基于常规导向的超深水平井井眼轨迹控制技术、超高温及超高密度钻井液技术、高酸性气田胶乳防气窜水泥浆固井技术等7项技术创新成果,并开展了现场试验及工业化应用,形成了超深井钻井配套技术,使我国超深井钻井技术跨入了世界先进行列。%Offshore oil and gas exploration is advancing to the ultra-deep structure field.For Sinopec, it is very common to encounter the complicated geological characteristics of complex pressure system, ancient sedimentary, HTHP, fluid toxicity and difficulties in engineering mechanics.In terms of drilling engineering, the technical problems exist in design optimiza-tion, high construction risk, slow drilling speed and quality control.In well drilling construction, long drilling period, com-plex circumstances, multiple faults, large investment and even being difficult to reach the target layer

  3. JIT生产方式在制造业中的应用%Application of just in time production mode to manufacturing industry

    Institute of Scientific and Technical Information of China (English)

    孙丽霞; 卢晨光; 范久臣

    2004-01-01

    准时JIT(Just In Time)生产方式是起源于日本丰田汽车公司的一种生产管理方法,它的基本思想是:只在需要的时候,按需要的量,生产所需的产品.本文结合跃进汽车集团公司的具体实例,阐述了JIT生产方式的基本思想和主要内容及其在我国的应用前景.

  4. Drilling fluid for the super-deep Well Mashen-1%马深1井超深井钻井液技术

    Institute of Scientific and Technical Information of China (English)

    罗人文; 龙大清; 王昆; 范建国; 吕佳; 白晶

    2016-01-01

    Well Mashen-1 is a key vertical well deployed in northeastern Sichuan by SINOPEC for preliminary exploration. Boast-ing of a TD of 8 418 m, it is the deepest land well drilled in Asia. The fourth and fifth spud-in intervals were drilled at depth of 6 225.4~8 418 m with bottom-hole temperature up to 175 ℃. Accordingly, these intervals have problems related to high-temperature pollu-tion, sidewall instability in mud shale, acidic pollution and sand-carrying. Generally speaking, properties of conventional drilling fluid may not satisfy demands for routine operation. With consideration of these technical challenges, optimized materials and formula were deployed to develop KCl polyamine sulfonated drilling fluid system and temperature -resistant polysulfonate drilling fluid system. Test results indicate that KCl polyamine sulfonated drilling fluid has outstanding inhibition capabilities and can endure temperature up to 200 ℃. In addition, highly matured processing technologies for drilling fluids in super deep well have been developed. Field application results show that the well diameter has been enlarged by approximately 3.1% during the fourth spud-in and 5.1% in the fifth spud-in. Since these technologies can effectively cope with the challenges in drilling fluid for super deep wells, they can be promoted for more extensive application.%马深1井是中石化部署在川东北地区的一口重点预探直井,完钻井深8418 m。本井四开、五开井段6225.4~8418.0 m,井底温度高达175℃,存在高温污染、泥页岩井壁失稳、酸根污染以及携砂问题,常规钻井液性能已无法满足正常施工要求。鉴于以上技术难点,通过材料优选、配方优化,成功研制了 KCl 聚胺磺化钻井液体系和抗高温聚磺钻井液体系。经过体系验证:KCl 聚胺磺化钻井液具有良好的抑制能力;抗高温聚磺钻井液体系抗温达200℃。同时,在应用过程中形成了成熟的超深井钻井液

  5. BTA深孔钻削智能纠偏技术研究%Technology Research on BTA Deep-Hole Drilling Intelligent Rectification

    Institute of Scientific and Technical Information of China (English)

    李楠; 吴伏家

    2013-01-01

    基于目前深孔钻削过程轴线偏斜技术难题,针对BTA(Boring and Trepanning Association)深孔钻削过程出现走偏现象[1-2],采用钻柄位置镶嵌微型单向阀方法,通过切削液流道的油压变化智能开闭单向阀 只适用于工件旋转、刀具进给的加工方式.在刀具加工过程中,刀具出现走偏时,指定位置的微型单向阀自动打开,运用油液的冲击力,使刀具自动纠偏.当刀具纠正后,微型单向阀会自动关闭,不用停机检测,可达到在线纠偏的效果,大大提高加工效率运用FLUENT流体动力学软件对切削液油压系统进行数值模拟,为BTA深孔钻削智能纠偏提供理论依据.%According to the current technical problems of axis deviation during deep-hole drilling processing,in order to solve the phenomenon of deviation in BTA (Boring and Trepanning Association)deep-hole drilling,a method of inlays miniature check valve in drill shank is used,through the change of cutting fluid flow pressure,check valve is opened and closed intelligently,which is only applicable to the processing method of workpiece rotation and tool feed. During tooling processing, when the tool appears to be going deviation,the miniature check valve at the designed spot is opened,using the oil impact to make tool intelligently corrected.When the tool is corrected,miniature check valve will be automatically shut down,not needing to be stop or to be tested,which can achieve the effect of online rectification,greatly improving the processing efficiency.By using FLUENT fluid dynamics software to carry on number simulation for cutting fluid oil pressure system,the theoretical basis has been provided for the intelligent correction technique of BTA deep-hole drilling.

  6. Flowing fluid electrical conductivity logging of a deep borehole during and following drilling: estimation of transmissivity, water salinity and hydraulic head of conductive zones

    Science.gov (United States)

    Doughty, Christine; Tsang, Chin-Fu; Rosberg, Jan-Erik; Juhlin, Christopher; Dobson, Patrick F.; Birkholzer, Jens T.

    2016-11-01

    Flowing fluid electrical conductivity (FFEC) logging is a hydrogeologic testing method that is usually conducted in an existing borehole. However, for the 2,500-m deep COSC-1 borehole, drilled at Åre, central Sweden, it was done within the drilling period during a scheduled 1-day break, thus having a negligible impact on the drilling schedule, yet providing important information on depths of hydraulically conductive zones and their transmissivities and salinities. This paper presents a reanalysis of this set of data together with a new FFEC logging data set obtained soon after drilling was completed, also over a period of 1 day, but with a different pumping rate and water-level drawdown. Their joint analysis not only results in better estimates of transmissivity and salinity in the conducting fractures intercepted by the borehole, but also yields the hydraulic head values of these fractures, an important piece of information for the understanding of hydraulic structure of the subsurface. Two additional FFEC logging tests were done about 1 year later, and are used to confirm and refine this analysis. Results show that from 250 to 2,000 m depths, there are seven distinct hydraulically conductive zones with different hydraulic heads and low transmissivity values. For the final test, conducted with a much smaller water-level drawdown, inflow ceased from some of the conductive zones, confirming that their hydraulic heads are below the hydraulic head measured in the wellbore under non-pumped conditions. The challenges accompanying 1-day FFEC logging are summarized, along with lessons learned in addressing them.

  7. Flowing fluid electrical conductivity logging of a deep borehole during and following drilling: estimation of transmissivity, water salinity and hydraulic head of conductive zones

    Science.gov (United States)

    Doughty, Christine; Tsang, Chin-Fu; Rosberg, Jan-Erik; Juhlin, Christopher; Dobson, Patrick F.; Birkholzer, Jens T.

    2017-03-01

    Flowing fluid electrical conductivity (FFEC) logging is a hydrogeologic testing method that is usually conducted in an existing borehole. However, for the 2,500-m deep COSC-1 borehole, drilled at Åre, central Sweden, it was done within the drilling period during a scheduled 1-day break, thus having a negligible impact on the drilling schedule, yet providing important information on depths of hydraulically conductive zones and their transmissivities and salinities. This paper presents a reanalysis of this set of data together with a new FFEC logging data set obtained soon after drilling was completed, also over a period of 1 day, but with a different pumping rate and water-level drawdown. Their joint analysis not only results in better estimates of transmissivity and salinity in the conducting fractures intercepted by the borehole, but also yields the hydraulic head values of these fractures, an important piece of information for the understanding of hydraulic structure of the subsurface. Two additional FFEC logging tests were done about 1 year later, and are used to confirm and refine this analysis. Results show that from 250 to 2,000 m depths, there are seven distinct hydraulically conductive zones with different hydraulic heads and low transmissivity values. For the final test, conducted with a much smaller water-level drawdown, inflow ceased from some of the conductive zones, confirming that their hydraulic heads are below the hydraulic head measured in the wellbore under non-pumped conditions. The challenges accompanying 1-day FFEC logging are summarized, along with lessons learned in addressing them.

  8. 深水钻井船水消防系统的设计%Water fire-fighting system for deep water drilling ship

    Institute of Scientific and Technical Information of China (English)

    徐天晓; 于再红

    2013-01-01

    There are great differences between the design of water fire-fighting system in deep water drilling ships and that in common ships. The design and calculation is more complex due to the configuration of watering pressure stabilization system and supply of fire-fighting water for water spray system ,foam fire-fighting system and other subsystems for fire-fighting. This paper discusses the design and calculation key points of its water fire-fighting system for a deep water drilling ship with ABS classification.%深水钻井船水消防系统的设计与常规船舶有较大不同,湿式稳压系统的配置以及为水喷淋系统和泡沫消防系统等其他消防子系统提供消防水的要求,导致其设计和计算相对复杂。文中以某型入级ABS的深水钻井船为例,论述其水消防系统的设计与计算要点。

  9. Footprint, weathering, and persistence of synthetic-base drilling mud olefins in deep-sea sediments following the Deepwater Horizon disaster.

    Science.gov (United States)

    Stout, Scott A; Payne, James R

    2017-03-13

    Olefin-based synthetic-based drilling mud (SBM) was released into the Gulf of Mexico as a result of the Deepwater Horizon (DWH) disaster in 2010. We studied the composition of neat SBM and, using conventional GC-FID, the extent, concentration, and chemical character of SBM-derived olefins in >3600 seafloor sediments collected in 2010/2011 and 2014. SBM-derived (C14-C20) olefins occurred (up to 10cm deep) within a 6.5km(2) "footprint" around the well. The olefin concentration in most sediments decreased an order of magnitude between 2010/2011 and 2014, at least in part due to biodegradation, evidenced by the preferential loss C16 and C18 linear (α- and internal) versus branched olefins. Based on their persistence for 4-years in sediments around the Macondo well, and 13-years near a former unrelated drill site (~62km away), weathered SBM-derived olefins released during the DWH disaster are anticipated to persist in deep-sea sediment for (at least) a comparable duration.

  10. Paleo-environment of cold-water coral initiation in the NE Atlantic:Implications from a deep-water carbonate mound drilling core

    Science.gov (United States)

    Raddatz, J.; Rüggeberg, A.; Dullo, W.-Chr.,; Margreht, S.

    2009-04-01

    The understanding of the paleo-environment during initiation and early development of deep-water carbonate mounds in the NE Atlantic is still under debate. The Integrated Ocean Drilling Program Expedition 307 sailed in 2005 to the Porcupine Seabight in order to investigate for the first time sediments from the base of a giant carbonate mound (Challenger Mound, 155 m). These results indicate that the initiation and start-up phase of this carbonate mound coincides with the beginning of the Northern Hemisphere Glaciation (NHG) at around 2.6 Ma (Kano et al. 2007). Further carbonate mound development seems to be strongly dependent on rapid changes in paleo-oceanographic and climatic conditions around the Pliocene-Pleistocene boundary, especially characterized and caused by intermediate water masses. To characterise the paleo-environmental and paleo-ecological setting favourable for the initial coral colonization at 2.6 Ma, we use well-developed proxies such as δ18O and δ13C of planktonic (Globigerina bulloides) and of a collection of benthic foraminifera (Cibicidoides wuellerstorfi, Discanomalina coronata, Cibicides lobatulus, Lobatulua antarctica, Planulina ariminensis), benthic foraminiferal assemblages, as well as grain size analysis. These proxies indicate variability in seawater temperature, salinity and density of intermediate water masses from southern origin (Mediterranean, Bay of Biscay) supporting cold-water coral settlement and initial development in the Porcupine Seabight. References: Kano et al. (2007) Age constraints on the origin and growth history of a deep-water coral mound in the northeast Atlantic drilled during Integrated Ocean Drilling Program Expedition 307. Geology, 35(11):1051-1054.

  11. Drilling comparison in "warm ice" and drill design comparison

    DEFF Research Database (Denmark)

    Augustin, L.; Motoyama, H.; Wilhelms, F.

    2007-01-01

    at each site, the drilling rate dropped and the drilling teams had to deal with refrozen ice on cutters and drill heads. Drills have different limits and perform differently. In this comparative study, we examine depth, pressure, temperature, pump flow and cutting speed. Finally, we compare a few......For the deep ice-core drilling community, the 2005/06 Antarctic season was an exciting and fruitful one. In three different Antarctic locations, Dome Fuji, EPICA DML and Vostok, deep drillings approached bedrock (the ice-water interface in the case of Vostok), emulating what had previously been...... achieved at NorthGRIP, Greenland, (summer 2003 and 2004) and at EPICA Dome C2, Antarctica (season 2004/05). For the first time in ice-core drilling history, three different types of drill (KEMS, JARE and EPICA) simultaneously reached the depth of 'warm ice' under high pressure. After excellent progress...

  12. Dual gradient drilling - simulations during connection operations

    OpenAIRE

    Time, André

    2014-01-01

    As oilfields are ageing and depleting, operators are forced to start searching for oil in more hostile environments. These new environments can introduce new drilling challenges. Prospects like ultra deep water reservoirs and depleted offshore reservoirs are difficult to drill with conventional drilling. This has lead the industry to developing the Dual Gradient Drilling (DGD) system. DGD is an unconventional drilling method and it is classified as a Managed Pressure Drilling ...

  13. Tidal control on gas flux from the Precambrian continental bedrock revealed by gas monitoring at the Outokumpu Deep Drill Hole, Finland

    Science.gov (United States)

    Kietäväinen, Riikka; Ahonen, Lasse; Wiersberg, Thomas; Korhonen, Kimmo; Pullinen, Arto

    2017-04-01

    Deep groundwaters within Precambrian shields are characteristically enriched in non-atmospheric gases. High concentrations of methane are frequently observed especially in graphite bearing metasedimentary rocks and accumulation of hydrogen and noble gases due to water-rock interaction and radioactive decay within the U, Th and K containing bedrock takes place. These gases can migrate not only through fractures and faults, but also through tunnels and boreholes, thereby potentially mobilizing hazardous compounds for example from underground nuclear waste repositories. Better understanding on fluid migration may also provide tools to monitor changes in bedrock properties such as fracture density or deterioration and failure of engineered barriers. In order to study gas migration mechanisms and variations with time, we conducted a gas monitoring campaign in eastern Finland within the Precambrian Fennoscandian Shield. At the study site, the Outokumpu Deep Drill Hole (2516 m), spontaneous bubbling of gases at the well head has been on-going since the drilling was completed in 2005, i.e. over a decade. The drill hole is open below 39 m. In the experiment an inflatable packer was placed 15 cm above the water table inside the collar (Ø 32.4 cm), gas from below the packer was collected and the gas flow in the pipe line carefully assisted by pumping (130 ml/min). Composition of gas was monitored on-line for one month using a quadrupole mass spectrometer (QMS) with measurement interval of one minute. Changes in the hydraulic head and in situ temperature were simultaneously recorded with two pressure sensors which were placed 1 m apart from each other below the packer such that they remained above and below the water table. In addition, data was compared with atmospheric pressure data and theoretical effect of Earth tides at the study site. Methane was the dominant gas emanating from the bedrock, however, relative gas composition fluctuated with time. Subsurface derived gases

  14. Just-in-Time Support

    Science.gov (United States)

    Rollins, Suzy Pepper

    2016-01-01

    Most students have gaps in their background knowledge and basic skills-gaps that can stand in the way of learning new concepts. For example, a student may be excited about studying probability--until he realizes that today's lesson on probability will require him to use fractions. As his brain searches frantically for his dim recollection of the…

  15. The analysis of the Just-In-Time Supplying System in the construction projects%施工项目中准时供应体系浅析

    Institute of Scientific and Technical Information of China (English)

    郁海杰

    2015-01-01

    物资采购和供应在施工项目中占据着重要的位置,其实施效果影响着关系着一个项目的成败。准时供应体系着眼于此,革新了传统的方式和理念,具有十分重要的意义。%Purchasing and supplying of the materials on the construction site is significant. The effect of the conduction of these wil decide the project ending. Just-In-Time Supplying System is focused at this and it reforms the traditional methods of materials supplying.

  16. One of Modern Enterprise Production Management Technologies--JIT(Just In Time)%现代企业生产管理技术之一--JIT技术

    Institute of Scientific and Technical Information of China (English)

    蒋洪超

    2003-01-01

    介绍JIT(Just in time-准时化生产技术)的概念、JIT的基本原理、7种浪费类型.在此基础着重论述在JIT应用中的3个原则、8个管理项目以及如何构建JIT制造单元.JIT生产不仅仅是一种生产技术,更重要的是它是一种全新的管理模式,它不但能消除明显的浪费,而且能消除隐藏的浪费.

  17. Laboratory preparation questionnaires as a tool for the implementation of the Just in Time Teaching in the Physics I laboratories: Research training

    Science.gov (United States)

    Miranda, David A.; Sanchez, Melba J.; Forero, Oscar M.

    2017-06-01

    The implementation of the JiTT (Just in Time Teaching) strategy is presented to increase the previous preparation of students enrolled in the subject Physics Laboratory I offered at the Industrial University of Santander (UIS), Colombia. In this study, a laboratory preparation questionnaire (CPL) was applied as a tool for the implementation of JiTT combined with elements of mediated learning. It was found that the CPL allows to improve the students’ experience regarding the preparation of the laboratory and the development of the experimental session. These questionnaires were implemented in an academic manager (Moodle) and a web application (lab.ciencias.uis.edu.co) was used to publish the contents essential for the preparation of the student before each practical session. The most significant result was that the students performed the experimental session with the basic knowledge to improve their learning experience.

  18. Deep hole drilling in the freezing process construction method in the control of%深孔钻进在冻结法施工中的过程控制研究

    Institute of Scientific and Technical Information of China (English)

    戴国涛; 王海滨

    2013-01-01

    随着冻结深度的增加,深孔钻进技术应用越来越广。深孔钻进在大深度高地应力的影响下,偏离值加大,甚至使钻孔失败。本文对引起偏斜过大原因进行分析,从而对其从源头和过程进行有效的控制。本文重点介绍、研究了过程控制中必须注重前期控制,在钻进过程中的测斜,定时定深度的采取纠偏措施,将偏值控制在允许范围内。%with the increasing depth of freezing, deep hole drilling technology is applied more and more widely. Deep drill-ing in deep high stress, deviation from the value increase, even the drilling failure. The cause analysis the reason of the exces-sive deflection, thus effectively from the source and process con-trol of the. The paper introduces the research must pay attention to pre control and process control in the process of drilling incli-nometer, take corrective measures for timing and depth, the bi-as is controlled within the permissible range.

  19. The Campi Flegrei Deep Drilling Project (CFDDP): New insight on caldera structure, evolution and hazard implications for the Naples area (Southern Italy)

    Science.gov (United States)

    De Natale, Giuseppe; Troise, Claudia; Mark, Darren; Mormone, Angela; Piochi, Monica; Di Vito, Mauro A.; Isaia, Roberto; Carlino, Stefano; Barra, Diana; Somma, Renato

    2016-12-01

    The 501 m deep hole of the Campi Flegrei Deep Drilling Project, located west of the Naples metropolitan area and inside the Campi Flegrei caldera, gives new insight to reconstruct the volcano-tectonic evolution of this highly populated volcano. It is one of the highest risk volcanic areas in the world, but its tectonic structure, eruptive history, and size of the largest eruptions are intensely debated in the literature. New stratigraphic and 40Ar/39Ar geochronological dating allow us to determine, for the first time, the age of intracaldera deposits belonging to the two highest magnitude caldera-forming eruptions (i.e., Campanian Ignimbrite, CI, 39 ka, and Neapolitan Yellow Tuff, NYT, 14.9 ka) and to estimate the amount of collapse. Tuffs from 439 m of depth yield the first 40Ar/39Ar age of ca. 39 ka within the caldera, consistent with the CI. Volcanic rocks from the NYT were, moreover, detected between 250 and 160 m. Our findings highlight: (i) a reduction of the area affected by caldera collapse, which appears to not include the city of Naples; (ii) a small volume of the infilling caldera deposits, particularly for the CI, and (iii) the need for reassessment of the collapse amounts and mechanisms related to larger eruptions. Our results also imply a revaluation of volcanic risk for the eastern caldera area, including the city of Naples. The results of this study point out that large calderas are characterized by complex collapse mechanisms and dynamics, whose understanding needs more robust constraints, which can be obtained from scientific drilling.

  20. Evolution of fluid-rock interaction in the Reykjanes geothermal system, Iceland: Evidence from Iceland Deep Drilling Project core RN-17B

    Science.gov (United States)

    Fowler, Andrew P. G.; Zierenberg, Robert A.; Schiffman, Peter; Marks, Naomi; Friðleifsson, Guðmundur Ómar

    2015-09-01

    We describe the lithology and present spatially resolved geochemical analyses of samples from the hydrothermally altered Iceland Deep Drilling Project (IDDP) drill core RN-17B. The 9.3 m long RN-17B core was collected from the seawater-dominated Reykjanes geothermal system, located on the Reykjanes Peninsula, Iceland. The nature of fluids and the location of the Reykjanes geothermal system make it a useful analog for seafloor hydrothermal processes, although there are important differences. The recovery of drill core from the Reykjanes geothermal system, as opposed to drill cuttings, has provided the opportunity to investigate evolving geothermal conditions by utilizing in-situ geochemical techniques in the context of observed paragenetic and spatial relationships of alteration minerals. The RN-17B core was returned from a vertical depth of ~ 2560 m and an in-situ temperature of ~ 345 °C. The primary lithologies are basaltic in composition and include hyaloclastite breccia, fine-grained volcanic sandstone, lithic breccia, and crystalline basalt. Primary igneous phases have been entirely pseudomorphed by calcic plagioclase + magnesium hornblende + chlorite + titanite + albitized plagioclase + vein epidote and sulfides. Despite the extensive hydrothermal metasomatism, original textures including hyaloclastite glass shards, lithic clasts, chilled margins, and shell-fragment molds are superbly preserved. Multi-collector LA-ICP-MS strontium isotope ratio (87Sr/86Sr) measurements of vein epidote from the core are consistent with seawater as the dominant recharge fluid. Epidote-hosted fluid inclusion homogenization temperature and freezing point depression measurements suggest that the RN-17B core records cooling through the two-phase boundary for seawater over time to current in-situ measured temperatures. Electron microprobe analyses of hydrothermal hornblende and hydrothermal plagioclase confirm that while alteration is of amphibolite-grade, it is in disequilibrium

  1. Drilling into seismogenic zones of M2.0 - M5.5 earthquakes in deep South African gold mines (DSeis)

    Science.gov (United States)

    Ogasawara, Hiroshi; Durrheim, Raymond; Yabe, Yasuo; Ito, Takatoshi; van Aswegen, Gerrie; Cichowicz, Artur; Onstott, Tullis; Kieft, Tom; Boettcher, Margaret; Wiemer, Stefan; Ziegler, Martin; Janssen, Christoph; Shapiro, Serge; Gupta, Harsh; Dight, Phil

    2016-04-01

    Several times a year, mining-induced earthquakes with magnitudes equal to or larger than 2 take place only a few tens of meters away from active workings in South African gold mines at depths of up to 3.4 km. The largest event recorded in mining regions, a M5.5 earthquake, took place near Orkney, South Africa on 5 August 2014, with the upper edge of the activated fault being only some hundred meters below the nearest mine workings (3.0 km depth). This is one of the rare events for which detailed seismological data are available, both from surface and underground seismometers and strainmeters, allowing for a detailed seismological analysis and comparison with in-situ observed data. Therefore, this earthquake calls for drilling to investigate the seismogenic zones before aftershocks diminish. Such a project will have a significantly better spatial coverage (including nuclei of ruptures, strong motion sources, asperities, and rupture edges) than drilling in seismogenic zones of natural large earthquakes and will be possible with a lower risk and at much smaller costs. In seismogenic zones in a critical state of stress, it is difficult to delineate reliably the local spatial variation in both directions and magnitudes of principal stresses (3D full stress tensor) reliably. However, we have overcome this problem. We are able to numerically model stress better than before, enabling us to orient boreholes so that the chance of stress-induced damage during stress measurement is minimized, and enabling us to measure the full 3D stress tensor successively in a hole within reasonable time even when stresses are as large as those expected in seismogenic zones. Better recovery of cores with less stress-induced damage during drilling is also feasible. These will allow us to address key scientific questions in earthquake science and associated deep biosphere activities which have remained elusive. We held a 4-day workshop sponsored by ICDP and Ritsumeikan University in October

  2. Continental Scientific Drilling Program.

    Science.gov (United States)

    1979-01-01

    Resource Priorities in Continental Drilling J. J. Hemley 12 Aspects of Continental Crustal Structure and Growth Scott Smithson 13 Deep-Drilling Targets...Time of Workshop Allen F. Agnew Library of Congress Clarence R. Allen California Institute of Technology Orson L. Anderson University of California at...Skinner Yale University Norman H. Sleep Northwestern University Laurence L. Sloss Northwestern University Scott B. Smithson University of Wyoming

  3. Sub-lethal effects of water-based drilling muds on the deep-water sponge Geodia barretti.

    Science.gov (United States)

    Edge, Katelyn J; Johnston, Emma L; Dafforn, Katherine A; Simpson, Stuart L; Kutti, Tina; Bannister, Raymond J

    2016-05-01

    Offshore oil and gas activities can result in the discharge of large amounts of drilling muds. While these materials have generally been regarded as non-toxic to marine organisms, recent studies have demonstrated negative impacts to suspension feeding organisms. We exposed the arctic-boreal sponge Geodia barretti to the primary particulate components of two water-based drilling muds; barite and bentonite. Sponges were exposed to barite, bentonite and a natural reference sediment at a range of total suspended solid concentrations (TSS = 0, 10, 50 or 100 mg/L) for 12 h after which we measured a suite of biomarker responses (lysosomal membrane stability, lipid peroxidation and glutathione). In addition, we compared biomarker responses, organic energy content and metal accumulation in sponges, which had been continuously or intermittently exposed to suspended barite and natural sediment for 14 d at relevant concentrations (10 and 30 mg TSS/L). Lysosomal membrane stability was reduced in the sponges exposed to barite at 50 and 100 mg TSS/L after just 12 h and at 30 mg TSS/L for both continuous and intermittent exposures over 14 d. Evidence of compromised cellular viability was accompanied by barite analysis revealing concentrations of Cu and Pb well above reference sediments and Norwegian sediment quality guidelines. Metal bioaccumulation in sponge tissues was low and the total organic energy content (determined by the elemental composition of organic tissue) was not affected. Intermittent exposures to barite resulted in less toxicity than continuous exposure to barite. Short term exposures to bentonite did not alter any biomarker responses. This is the first time that these biomarkers have been used to indicate contaminant exposure in an arctic-boreal sponge. Our results illustrate the potential toxicity of barite and the importance of assessments that reflect the ways in which these contaminants are delivered under environmentally realistic conditions.

  4. 国外深海底岩芯取样钻机设计参数及其应用效果%The Design Parameters and Application of Foreign Deep-seabed Coring drills

    Institute of Scientific and Technical Information of China (English)

    彭芸; 夏建新; 任华堂

    2015-01-01

    深海底蕴藏着大量的矿产资源,海底资源的开发有助于缓解全球性资源匮乏的局面。深海岩芯取样钻机是进行深海底矿产资源勘探、地质调查等不可缺少的重大技术装备。总结了国外已开发深海底岩芯取样钻机的主要设计参数及特点,分析了国外不同钻机的实际应用效果以及发展趋势。研究发现,国外已经先后开发了多台深海底岩芯取样钻机,部分已经应用于深海钻孔取芯,但均存在不同程度的技术问题;经过曲折的研发历程,钻机的钻具以及钻进方法均得到优化,但仍存在取芯率不稳定且普遍偏低等问题。探究国外钻机设计技术及开发经验,以期为我国深海钻机的研发和改进提供参考。%There are a large number of mineral resources hidden in the sea-floor, and the development of seabed re-sources is helpful for easing the situation of global resource scarcity. The deep-seabed coring drills are major technical equip-ment for resource exploration,geological survey in seafloor et al. The designed parameters and features of foreign deep-sea co-ring drills were summarized;The result of actual application and the development trend of foreign Coring drills were analyzed. From the study,many foreign countries have developed sets of deep-seabed Coring drills,and some of them have been used in sea-floor core drilling,but exist some kinds of technical issues. The drill tool and drilling method have been optimized undergo-ing a hard time,but there are still some problems that coring rate is not stable and generally low. In order to provide powerful reference for developing and improving the deep-sea coring drills of China,it is necessary to research design technology and de-velopment experience of foreign drills.

  5. Comparison of Deep Drill Braced Monument (DDBM) and Borehole Strainmeter (BSM) Wellhead GPS antenna mounts: a Plate Boundary Observatory (PBO) case study from Dinsmore, CA

    Science.gov (United States)

    Williams, T. B.; Austin, K. E.; Borsa, A. A.; Feaux, K.; Jackson, M. E.; Johnson, W.; Mencin, D.

    2010-12-01

    With the 2009 installation of GPS station P793 in Dinsmore, CA, the Plate Boundary Observatory (PBO) created a unique opportunity to directly compare a traditional deep drill braced GPS monument (DDBM) with a borehole strainmeter (BSM) wellhead GPS monument. PBO installed a GPS antenna to the wellhead of BSM B935 to perform a direct comparison to DDBM P327 in an attempt to determine stability and long-term behavior of both. The two adjacent stations share power and communications and are roughly 20 meters apart. The steel BSM casing is cemented ~520ft in meta-sandstone & shale, while the DDBM is anchored ~30ft deep in alluvial river gravels. Both stations are located inside a rural auto wrecking yard, which has potential sources of fixed noise in the form of multipath reflections off large metal objects. Preliminary analysis indicates consistent measurements in the North-South component, and a ~3.3 mm difference in the East-West component that has been detected between the two stations over a 450-day period (~2.7 mm/yr). The analysis utilizes standard PBO data products and differences time series data from each station in the SNARF 1.0 and IGS 2005 reference frames. We estimate the time dependent seasonal variations observed at each station and compare with available temperature and precipitation data to attempt to identify the cause of differential movement between the monuments.

  6. The Research and Application of Deep Hole Core Drilling Equipment for Wenchuan Earthquake Fault Scientific Drilling Project%汶川地震断裂带科学钻探项目深孔取心钻探设备的研制与应用

    Institute of Scientific and Technical Information of China (English)

    朱江龙; 胡时友; 黄洪波; 刘跃进; 张伟

    2012-01-01

      深孔取心钻探设备是为满足汶川地震断裂带科学钻探项目(WFSD)3000 m深部取心钻探需要而自主研制的我国首套科学钻探专用设备,包括KZ3000型全液压钻机以及深部钻探配套用高压泥浆泵和钻杆钻具等。该套设备集全液压、高速顶驱、大口径、深部取心于一身,具有综合能力强、工艺适应性广、操控智能程度高等特点,在WFSD-2孔深部取心钻探中,各项功能满足设计要求,应用情况良好。该套设备作为我国深部钻探装备的阶段性创新成果,在科学钻探、深部找矿和浅层油气钻采中,具有一定的推广价值。%  Deep hole core drilling equipment, including KZ3000 drill rig, high-pressure mud pump and wire-line coring rods and tools, is the first scientific drilling system in China, which was independently designed and manufactured to meet the needs of Wenchuan earthquake fault scientific drilling project (WFSD).The equipment is set fully hydraulic, high-speed top drive, large diameter and deep coring in one, featuring good comprehensive capability, wide process adaptability and high in-telligence of manipulation.During the WFSD-2 deep hole core drilling, it worked well by meeting the design requirements in all functions.As stage innovations for deep drilling equipment, it has a potential market value in scientific drilling, deep prospecting and shallow oil and gas drilling.

  7. PENERAPAN METODE JUST-IN-TIME DENGAN PEMBAKUAN KEGIATAN DAN MINIMASI WAKTU SET-UP PADA BAGIAN PERMESINAN PEMBUATAN PRODUK GT 060

    Directory of Open Access Journals (Sweden)

    Indah Pratiwi

    2007-08-01

    Full Text Available Membuat produk dalam jumlah banyak menyebabkan pemborosan yang dapat mengurangi efisiensi produksi. Aktivitas yang paling banyak membuang waktu adalah aktivitas set-up mesin, untuk mengatasi masalah ini maka perlu diterapkan metode just-in-time dengan pembakuan kegiatan dan minimasi waktu set-up dengan mengambil kondisi real yang ada pada lantai produksi. Penelitian dilakukan di CV. Roda Jati, data yang digunakan adalah waktu penyelesaian komponen frame ujung produk GT 060 pada bagian permesinan dan waktu set-up mesin. Analisa meliputi : urutan kegiatan sekarang, usulan pembakuan kegiatan, perbaikan pembakuan kegiatan menggunakan minimasi waktu set-up, analisa menggunakan prinsip 5S. Hasil dari pengamatan didapatkan pembakuan kegiatan pada bagian permesinan dan mengurangi waktu set-up mesin. Waktu yang digunakan untuk memproduksi komponen tersebut sebelum dilakukan pembakuan kegiatan sebesar 4655,42 detik dan mengalami penurunan menjadi 4635,08 detik. Setelah dilakukan minimasi waktu set-up maka mengalami penurunan lagi mejadi sebesar 4296,31detik. Agar proses dapat selesai tepat waktu maka operator harus mentaati kegiatan yang telah dibakukan perusahaan dan dilakukan minimasi waktu set-up sebelum melakukan pekerjaan. Mempromosikan program 5S agar pekerja membiasakan diri untuk menjaga kerapian, kebersihan dan kedisplinan pada waktu berkerja.

  8. A Fuzzy Parallel Processing Scheme for Enhancing the Effectiveness of a Dynamic Just-in-time Location-aware Service System

    Directory of Open Access Journals (Sweden)

    Toly Chen

    2014-04-01

    Full Text Available Location-aware service systems are a hot topic in diverse research fields including mobile commerce, ambient intelligence, remote sensing and ubiquitous computing. However, the timeliness and efficiency of such systems are two issues that have rarely been emphasized. For this reason, this study tries to establish a location-aware service system in which both the timeliness and efficiency of service provision are addressed. To this end, some innovative treatments have been used in the proposed methodology. First, the uncertainty of detecting a user’s location using the global positioning system is considered by modeling the location and speed of the user with fuzzy numbers. Subsequently, a fuzzy integer-nonlinear programming model is formulated to address the problem of finding the dynamic just-in-time service location and path for the user. To help solve the problem, the maximum entropy weighting function and the basic defuzzification distribution (BADD method are applied to defuzzify the fuzzy variables. In addition, to enhance the efficiency of solving the problem, a fuzzy parallel processing scheme is also proposed for decomposing the problem into smaller pieces that can be handled by separate processing modules. An illustrative example is used to illustrate the proposed methodology. Finally, the effectiveness of the proposed methodology has been confirmed with an experiment. According to the results, using the proposed methodology the waiting time could be reduced by 60%.

  9. Assessment of the Influence of Just in Time (JIT delivery of Materials in Managing Cost Levels in the Pharmaceutical Industry in Kenya

    Directory of Open Access Journals (Sweden)

    Antony Muse Ouma

    2013-11-01

    Full Text Available This article assesses the influence of Just in time (JIT delivery of materials in managing cost levels in the pharmaceutical industry in Kenya. Non - probability sampling technique under the category of purposive sampling was used. The population of interest was composed of twenty three pharmaceutical manufacturing firms located in Nairobi, registered in the Kenya Fact book 16th Edition, 2001 & The Kenya Telephone Directory 2004 and nine pharmaceutical companies , 23 employees in manufacturing, finance, procurement, warehousing were selected out of the target population of 28. The research instrument was a questionnaire. Analysis of the data was done using descriptive statistics and inferential statistics .The study affirmed by 63.2% that JIT production strategy and 62.4% respondents affirmed that JIT vendor strategy had a statistically significant association with the cost level management hence the relationship between the variables was not due to chance. The study recommends that pharmaceutical companies in Kenya should fully adopt lean manufacturing in order to manage its cost levels hence give the firm a competitive advantage.

  10. 电磁式轴向深孔振动钻削装置的设计与分析%Design and Research on Electromagnetic Axial Vibration Drilling Device for Deep Holes

    Institute of Scientific and Technical Information of China (English)

    马清艳; 王彪; 刘永姜; 于大国; 王东旭

    2011-01-01

    The deep holes are often clogged by continuous chips, which are formed in the drilling process for deep holes, so the machined surface is more likely to be scratched, and the drill can be sticked or broken by the chips. E-lectromagnetic axial vibration drilling device for deep holes is designed, which is combined with negative pressure suction mechanism for chips. Frequency and amplitude of drill stem can be adjusted with frequency and size of the alternating current. The outstanding features are its simple structure, convenient adjustment of its frequency and amplitude, solving the problem of chip breaking and removal and improving the machining quality.%深孔的钻削过程中,经常会产生连续的带状切屑,堵塞在孔内,极易划伤已加工表面或者发生卡钻与断钻事故.设计一种电磁式深孔振动钻削装置,可通过改变交流电的频率和大小调整其钻杆频率与振幅,并与负压抽屑装置配合使用,显著特点是结构简单,振幅与频率调整方便,解决了深孔加工过程中断屑排屑困难的问题,提高深孔的加工质量.

  11. Deep-sea drilling closed-loop detection system based on STM32%基于STM32的深海钻机闭环检测系统

    Institute of Scientific and Technical Information of China (English)

    刘彦军; 刘敬彪; 蔡文郁

    2013-01-01

    In view of the present open-loop control situation of deep-sea drilling system,closed-loop detection system for deep-sea drilling system is designed and implemented.The system mainly consists of a STM32F103VC6 board and external sensors,it is an important link in the implementation of closed-loop control of deep-sea drilling rig.Detection system uses the CAN communication protocol with the drill main control system,and serial communication protocol with the monitoring system on the deck.%针对深海钻机系统现在还是开环控制的现状,设计并实现了深海钻机系统的闭环检测系统.该系统主要由一块基于STM32F103VC6的检测板和外部传感器组成,是实现深海钻机闭环控制的重要环节.检测系统与钻机主控系统采用CAN通信协议,与甲板监控系统采用串口通信.

  12. Microfacies of Deep-water Deposits and Forming Models of the Chinese Continental Scientific Drilling-SKII

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Extensive transgression of lake water occurred during the Cretaceous Qingshankou Stage and the Nengjiang Stage in the Songliao basin, forming widespread deep-water deposits. Eleven types of microfacies of deep-water deposits have been recognized in the continuous core rocks from the SKII,including mudstone of still water, marlite, dolostone, oil shale, volcanic ashes, turbidite, slump sediment, tempestite, seismite, ostracoda limestone and sparry carbonate, which are divided into two types: microfacies generated due to gradually changing environments (Ⅰ) and microfacies generated due to geological events (Ⅱ). Type Ⅰ is composed of some special fine grain sediments such as marlite,dolomite stone and oil shale as well as mudstone and Type Ⅱ is composed of some sediments related to geological events, such as volcanic ashes, turbiditie, slump sediment, tempestite, seismite, ostracoda limestone. The formation of sparry carbonate may be controlled by factors related to both environments and events. Generally, mudstone sediments of still water can be regarded as background sediments, and the rest sediments are all event sediments, which have unique forming models, which may reflect controlling effects of climatics and tectonics.

  13. Structure, mineralogy and microbial diversity of geothermal spring microbialites associated with a deep oil drilling in Romania

    Directory of Open Access Journals (Sweden)

    Cristian eComan

    2015-03-01

    Full Text Available Modern mineral deposits play an important role in evolutionary studies by providing clues to the formation of ancient lithified microbial communities. Here we report the presence of microbialite-forming microbial mats in different microenvironments at 32ºC, 49ºC and 65ºC around the geothermal spring from an abandoned oil drill in Ciocaia, Romania. The mineralogy and the macro- and microstructure of the microbialites were investigated, together with their microbial diversity based on a 16S rRNA gene amplicon sequencing approach. The calcium carbonate is deposited mainly in the form of calcite. At 32ºC and 49ºC, the microbialites show a laminated structure with visible microbial mat-carbonate crystal interactions. At 65ºC, the mineral deposit is clotted, without obvious organic residues. Partial 16S rRNA gene amplicon sequencing showed that the relative abundance of the phylum Archaea was low at 32ºC (1%. The dominant bacterial groups at 32ºC were Cyanobacteria, Gammaproteobacteria, Firmicutes, Bacteroidetes, Chloroflexi, Thermi, Actinobacteria, Planctomycetes and Defferibacteres. At 49ºC, there was a striking dominance of the Gammaproteobacteria, followed by Firmicutes, Bacteroidetes, and Armantimonadetes. The 65ºC sample was dominated by Betaproteobacteria, Firmicutes, [OP1], Defferibacteres, Thermi, Thermotogae, [EM3] and Nitrospirae. Several groups from Proteobacteria and Firmicutes, together with Halobacteria and Melainabacteria were described for the first time in calcium carbonate deposits. Overall, the spring from Ciocaia emerges as a valuable site to probe microbes-minerals interrelationships along thermal and geochemical gradients.

  14. Structure, mineralogy, and microbial diversity of geothermal spring microbialites associated with a deep oil drilling in Romania.

    Science.gov (United States)

    Coman, Cristian; Chiriac, Cecilia M; Robeson, Michael S; Ionescu, Corina; Dragos, Nicolae; Barbu-Tudoran, Lucian; Andrei, Adrian-Ştefan; Banciu, Horia L; Sicora, Cosmin; Podar, Mircea

    2015-01-01

    Modern mineral deposits play an important role in evolutionary studies by providing clues to the formation of ancient lithified microbial communities. Here we report the presence of microbialite-forming microbial mats in different microenvironments at 32°C, 49°C, and 65°C around the geothermal spring from an abandoned oil drill in Ciocaia, Romania. The mineralogy and the macro- and microstructure of the microbialites were investigated, together with their microbial diversity based on a 16S rRNA gene amplicon sequencing approach. The calcium carbonate is deposited mainly in the form of calcite. At 32°C and 49°C, the microbialites show a laminated structure with visible microbial mat-carbonate crystal interactions. At 65°C, the mineral deposit is clotted, without obvious organic residues. Partial 16S rRNA gene amplicon sequencing showed that the relative abundance of the phylum Archaea was low at 32°C (1%. The dominant bacterial groups at 32°C were Cyanobacteria, Gammaproteobacteria, Firmicutes, Bacteroidetes, Chloroflexi, Thermi, Actinobacteria, Planctomycetes, and Defferibacteres. At 49°C, there was a striking dominance of the Gammaproteobacteria, followed by Firmicutes, Bacteroidetes, and Armantimonadetes. The 65°C sample was dominated by Betaproteobacteria, Firmicutes, [OP1], Defferibacteres, Thermi, Thermotogae, [EM3], and Nitrospirae. Several groups from Proteobacteria and Firmicutes, together with Halobacteria and Melainabacteria were described for the first time in calcium carbonate deposits. Overall, the spring from Ciocaia emerges as a valuable site to probe microbes-minerals interrelationships along thermal and geochemical gradients.

  15. Operational performace of horizontal drillings in the deep aquiferous gas storage Kalle; Betriebsverhalten von Horizontalbohrungen im tiefen Aquifergasspeicher Kalle

    Energy Technology Data Exchange (ETDEWEB)

    Klafki, M.; Kammel, D. [DBI Gas- und Umwelttechnik GmbH, Freiberg (Germany); Below, P.J. [VEW Energie AG, Dortmund (Germany)

    1998-12-31

    The aquiferous structure Kalle, located in the Emsland, has contained compressed natural gas in the middle sandstone formation of the Volpriehausen-sandstone for 20 years. The storage stratum is between 2100 and 2200 m deep, 10-13 m thick and sufficiently porous and permeable. Gas storage operation and operational performance of the horizontal holes are described in this article. Filling and injection performance are also described. (orig./MSK) [Deutsch] Die im Emsland gelegene Aquiferstruktur Kalle fuehrt im Volpriehausen-Sandstein der geologischen Formation `Mittlerer Buntsandstein` nunmehr seit fast 20 Jahren eingepresstes Erdgas. Die Speicherschicht ist dort 2100 bis 2200 m tief, 10 bis 13 m maechtig und ausreichend poroes und permeabel. Im Folgenden werden der Gasspeicherbetrieb und das Betriebsverhalten der Horizontalbohrungen beschrieben. Das Ausspeisungsverhalten und das Injektionsverhalten werden ebenfalls erlaeutert. (orig./MSK)

  16. A clinically integrated curriculum in evidence-based medicine for just-in-time learning through on-the-job training: the EU-EBM project.

    Science.gov (United States)

    Coppus, Sjors F P J; Emparanza, Jose I; Hadley, Julie; Kulier, Regina; Weinbrenner, Susanne; Arvanitis, Theodoros N; Burls, Amanda; Cabello, Juan B; Decsi, Tamas; Horvath, Andrea R; Kaczor, Marcin; Zanrei, Gianni; Pierer, Karin; Stawiarz, Katarzyna; Kunz, Regina; Mol, Ben W J; Khan, Khalid S

    2007-11-27

    Over the last years key stake holders in the healthcare sector have increasingly recognised evidence based medicine (EBM) as a means to improving the quality of healthcare. However, there is considerable uncertainty about the best way to disseminate basic knowledge of EBM. As a result, huge variation in EBM educational provision, setting, duration, intensity, content, and teaching methodology exists across Europe and worldwide. Most courses for health care professionals are delivered outside the work context ('stand alone') and lack adaptation to the specific needs for EBM at the learners' workplace. Courses with modern 'adaptive' EBM teaching that employ principles of effective continuing education might fill that gap. We aimed to develop a course for post-graduate education which is clinically integrated and allows maximum flexibility for teachers and learners. A group of experienced EBM teachers, clinical epidemiologists, clinicians and educationalists from institutions from eight European countries participated. We used an established methodology of curriculum development to design a clinically integrated EBM course with substantial components of e-learning. An independent European steering committee provided input into the process. We defined explicit learning objectives about knowledge, skills, attitudes and behaviour for the five steps of EBM. A handbook guides facilitator and learner through five modules with clinical and e-learning components. Focussed activities and targeted assignments round off the learning process, after which each module is formally assessed. The course is learner-centred, problem-based, integrated with activities in the workplace and flexible. When successfully implemented, the course is designed to provide just-in-time learning through on-the-job-training, with the potential for teaching and learning to directly impact on practice.

  17. MJIT - Manutenção por Just in Time: manutenção otimizante realizada no tempo exato baseado em condições operacionais

    Directory of Open Access Journals (Sweden)

    Michitoshi Oishi

    1997-06-01

    Full Text Available O presente artigo investigou como as fábricas japonesas desenvolvem sua manutenção para redução das paradas de produção. Isto aumenta a qualidade e produtividade, evitando atraso na entrega dos produtos e satisfazendo as necessidades dos clientes. Além do TPM-Total Productive Maintenance, existe outro sistema de manutenção baseado nas condições operacionais do equipamento, realizando a manutenção no momento necessário, que pode ser chamado de MJ1T-Manutenção Por Jus In Time. Este sistema evita a manutenção baseada na estimativa de vida útil do equipamento que pode realizar a manutenção antes do momento necessário, como depois da quebra. Uma pesquisa qualitativa realizada em fábricas brasileiras, identificou o alto potencial e necessidade de implantação de um sistema de manutenção similar ao MJIT.This article investigated how Japanese factorys develop their maintenance to reduce productions pauses. It increases productivity and quality, avoides products late delivery and satisfies customers needs. Besides TPM-Total Productive Maintenance, there is another maintenance system based on equipment operational conditions doing the maintenance in the exact moment of necessity that can be called MJIT-Maintenance by Just In Time. It avoids unnecessary maintenance based on the estimated life time that may conduct to realize maintenance before the real necessity or after broken. A qualitative research in brasilian factorys identified a high potential and need of a mainenance system similar to MJIT.

  18. A clinically integrated curriculum in Evidence-based Medicine for just-in-time learning through on-the-job training: The EU-EBM project

    Directory of Open Access Journals (Sweden)

    Horvath Andrea R

    2007-11-01

    Full Text Available Abstract Background Over the last years key stake holders in the healthcare sector have increasingly recognised evidence based medicine (EBM as a means to improving the quality of healthcare. However, there is considerable uncertainty about the best way to disseminate basic knowledge of EBM. As a result, huge variation in EBM educational provision, setting, duration, intensity, content, and teaching methodology exists across Europe and worldwide. Most courses for health care professionals are delivered outside the work context ('stand alone' and lack adaptation to the specific needs for EBM at the learners' workplace. Courses with modern 'adaptive' EBM teaching that employ principles of effective continuing education might fill that gap. We aimed to develop a course for post-graduate education which is clinically integrated and allows maximum flexibility for teachers and learners. Methods A group of experienced EBM teachers, clinical epidemiologists, clinicians and educationalists from institutions from eight European countries participated. We used an established methodology of curriculum development to design a clinically integrated EBM course with substantial components of e-learning. An independent European steering committee provided input into the process. Results We defined explicit learning objectives about knowledge, skills, attitudes and behaviour for the five steps of EBM. A handbook guides facilitator and learner through five modules with clinical and e-learning components. Focussed activities and targeted assignments round off the learning process, after which each module is formally assessed. Conclusion The course is learner-centred, problem-based, integrated with activities in the workplace and flexible. When successfully implemented, the course is designed to provide just-in-time learning through on-the-job-training, with the potential for teaching and learning to directly impact on practice.

  19. 硬质合金麻花钻钻削不锈钢Q345深孔的试验研究%Experimental Study for Solid Carbide in Stainless Steel Q345 Drilling Deep Hole

    Institute of Scientific and Technical Information of China (English)

    张波; 许辉; 胡江林

    2012-01-01

    整体硬质合金钻头在加工塑性材料时断屑、排屑比较困难.分析实际加工条件和被加工材料的特征后,替换了原来使用的进口“皇冠”钻头.本文介绍替换的试验过程、结果,经试验验证超过了客户期望的寿命.%Problem of breaking chip and the chip draining in the machining process when deep-hole drilling on carbu-rized Q345. The characteristics of the material drilling are investigated and novel dill is replacement the crown drilloExperiments and test - run reveal that the tool-life of the drill increases by many times in comparison with that of the conventional ones.

  20. AIR AND GAS DRILLING SUCCEEDED IN NORTHEASTERN SICHUAN

    Institute of Scientific and Technical Information of China (English)

    Cai Tingyong

    2006-01-01

    @@ On January 21, 2006, air and gas deep well drilling test was successfully carried out in the Sinopec southern exploration area. Lingering problems pestering deep well drillings in the southern marine facies area like low drilling rate and prolonged drilling periods were well resolved: average drilling rate of conventional drilling is about 1.4 meters per hour with drilling period (above Xujiahe Formation) of about 130 days, whereas it took only 22 days to complete the same task by air and gas drilling, with penetration rate increased more than eightfold.

  1. Affecting factors research on the risks of deep water drilling operation in West Africa%西非深水JDZ-2-1井钻井工程整体风险分析

    Institute of Scientific and Technical Information of China (English)

    柯珂; 管志川; 张君亚; 王斌; 崔允

    2009-01-01

    Because of the high investment and high risk characteristic of drilling operation in deep water, pre-drilling risk evaluation was completed for the deep water Well-JDZ-2-1 in West Africa, it has significant benefits for emergency response. The influences of thunder storm, hurricane, wave, tide, fog, water depth, submarine ocean current, shallow geologic hazards, gas hydrate, abnormal pressure, narrow pore pressure/fracture pressure window and earthquake to the deep water drilling operation are covered in this paper.The real natural environment and geologic conditions of JDZ-2 Block was also considered when build up and evaluate the integrated risk hierarchical structure of drilling operation by using the Analytical Hierarchy Process (APH) method as per the normal component parts of conventional drilling operation in deep water. According to the analysis results, the influence of different factors to drilling fluid are significant and has the highest risk, the risk of drilling operation, coring operation and logging is lower. This analysis and research provided good reference for the selection of risk associated measures.%由于深水钻井具有高投资、高风险的特点,在西非深水JDZ-2-1井钻前对其进行风险评价,对做好应急备案具有重要意义.分别阐述了雷暴、暴风、波浪、潮汐、雾、水深、水下洋流、浅层地质灾害、天然气水合物、异常压力、狭窄的地层孔隙/破裂压力窗口和地震因素等对深水钻井作业的影响及危害,并结合JDZ-2区块的实际自然环境和地质条件,利用层次风险评价方法(APH),按照深水钻井常规作业的组成部分,建立钻井工程整体风险层次结构,对其进行整体风险评价.分析结果表明,JDZ-2-1井在钻井液性能受到各因素的影响较为明显时,其风险值最大,而钻进作业、取心和测井作业风险次之.该分析研究为制定应对风险的措施提供了参考.

  2. Petrology, phase equilibria and monazite geochronology of granulite-facies metapelites from deep drill cores in the Ordos Block of the North China Craton

    Science.gov (United States)

    He, Xiao-Fang; Santosh, M.; Bockmann, Kiara; Kelsey, David E.; Hand, Martin; Hu, Jianmin; Wan, Yusheng

    2016-10-01

    Among the various Precambrian crustal blocks in the North China Craton (NCC), the geology and evolution of the Ordos Block remain largely enigmatic due to paucity of outcrop. Here we investigate granulite-facies metapelites obtained from deep-penetrating drill holes in the Ordos Block and report petrology, calculated phase equilibria and in-situ monazite LA-ICP-MS geochronology. The rocks we studied are two samples of cordierite-bearing garnet-sillimanite-biotite metapelitic gneisses and one graphite-bearing, two-mica granitic gneiss. The peak metamorphic age from LA-ICP-MS dating of monazite in all three samples is in the range of 1930-1940 Ma. The (U + Pb)-Th chemical ages through EPMA dating reveals that monazite occurring as inclusions in garnet are older than those in the matrix. Calculated metamorphic phase diagrams for the cordierite-bearing metapelite suggest peak P-T conditions ca. 7-9 kbar and 775-825 °C, followed by decompression and evolution along a clockwise P-T path. Our petrologic and age data are consistent with those reported from the Khondalite Belt in the Inner Mongolia Suture Zone in the northern part of the Ordos Block, suggesting that these granulite-facies metasediments represent the largest Paleoproterozoic accretionary belt in the NCC.

  3. Electrodril system field test program. Phase II: Task C-1-deep drilling system demonstration. Final report for Phase II: Task C-1

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, P D

    1981-04-01

    The Electrodril Deep Drilling System field test demonstrations were aborted in July 1979, due to connector problems. Subsequent post test analyses concluded that the field replacable connectors were the probable cause of the problems encountered. The designs for both the male and female connectors, together with their manufacturing processes, were subsequently modified, as was the acceptance test procedures. A total of nine male and nine female connectors were manufactured and delivered during the 2nd Quarter 1980. Exhaustive testing was then conducted on each connector as a precursor to formal qualification testing conducted during the month of October 1980, at the Brown Oil Tool test facility located in Houston, Texas. With this report, requirements under Phase II, Task C-1 are satisfied. The report documents the results of the connector qualification test program which was successfully completed October 28, 1980. In general, it was concluded that connector qualification had been achieved and plans are now in progress to resume the field test demonstration program so that Electrodril System performance predictions and economic viability can be evaluated.

  4. Analysis of 6-year fluid electric conductivity logs to evaluate the hydraulic structure of the deep drill hole at Outokumpu, Finland

    Science.gov (United States)

    Sharma, Prabhakar; Tsang, Chin-Fu; Kukkonen, Ilmo T.; Niemi, Auli

    2016-07-01

    Over the last two decades, the flowing fluid electric conductivity (FFEC) logging method has been applied in boreholes in the well-testing mode to evaluate the transmissivity, hydraulic head, and formation water electrical conductivity as a function of depth with a resolution of about 10-20 cm. FFEC profiles along the borehole are obtained under both shut-in and pumping conditions in a logging procedure that lasts only 3 or 4 days. A method for analyzing these FFEC logs has been developed and successfully employed to obtain formation parameters in a number of field studies. The present paper concerns the analysis of a unique set of FFEC logs that were taken from a deep borehole reaching down to 2.5 km at Outokumpu, Finland, over a 6-year time period. The borehole intersects paleoproterozoic metasedimentary, granitoid, and ophiolite-derived rocks. After the well was drilled, completed, and cleaned up, FFEC logs were obtained after 7, 433, 597, 948, and 2036 days. In analyzing these five profiles, we discovered the need to account for salinity diffusion from water in the formation to the borehole. Analysis results include the identification of 15 hydraulically conducting zones along the borehole, the calculation of flow rates associated with these 15 zones, as well as the estimation of the variation of formation water electrical conductivity as a function of depth. The calculated flow rates were used to obtain the tentative hydraulic conductivity values at these 15 depth levels.

  5. 基于嵌入式深孔钻削的液压伺服控制%Hydraulic Servo-control based on Embedded Deep-hole Drilling

    Institute of Scientific and Technical Information of China (English)

    叶琳; 刘昆; 邱龙辉

    2011-01-01

    This paper descrihed the design of embedded hydraulic serva control system of deep-hole drilling based on ARM processor, and mainly analyzed the construct of system and the controlling strategy. The furry algorithm was adopted in the system It is useful with the advantage of small size, low power consumption, high control accuracy and good reliability.%介绍了基于ARM处理器的深孔钻削加工的液压伺服控制嵌入式系统的设计,重点分析了系统的构成和控制的策略等.控制策略采用模糊控制算法实现,充分利用了嵌入式系统具有功耗低、体积小、集成度高等特点,改进了深孔钻削加工的液压伺服控制系统,具有较高的实用价值.

  6. Electrodril system field test program. Phase II: Task C-1-deep drilling system demonstration. Final report for Phase II: Task C-1

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, P D

    1981-04-01

    The Electrodril Deep Drilling System field test demonstrations were aborted in July 1979, due to connector problems. Subsequent post test analyses concluded that the field replacable connectors were the probable cause of the problems encountered. The designs for both the male and female connectors, together with their manufacturing processes, were subsequently modified, as was the acceptance test procedures. A total of nine male and nine female connectors were manufactured and delivered during the 2nd Quarter 1980. Exhaustive testing was then conducted on each connector as a precursor to formal qualification testing conducted during the month of October 1980, at the Brown Oil Tool test facility located in Houston, Texas. With this report, requirements under Phase II, Task C-1 are satisfied. The report documents the results of the connector qualification test program which was successfully completed October 28, 1980. In general, it was concluded that connector qualification had been achieved and plans are now in progress to resume the field test demonstration program so that Electrodril System performance predictions and economic viability can be evaluated.

  7. Geothermal modelling of faulted metamorphic crystalline crust: a new model of the Continental Deep Drilling Site KTB (Germany)

    Science.gov (United States)

    Szalaiová, Eva; Rabbel, Wolfgang; Marquart, Gabriele; Vogt, Christian

    2015-11-01

    The area of the 9.1-km-deep Continental Deep Drillhole (KTB) in Germany is used as a case study for a geothermal reservoir situated in folded and faulted metamorphic crystalline crust. The presented approach is based on the analysis of 3-D seismic reflection data combined with borehole data and hydrothermal numerical modelling. The KTB location exemplarily contains all elements that make seismic prospecting in crystalline environment often more difficult than in sedimentary units, basically complicated tectonics and fracturing and low-coherent strata. In a first step major rock units including two known nearly parallel fault zones are identified down to a depth of 12 km. These units form the basis of a gridded 3-D numerical model for investigating temperature and fluid flow. Conductive and advective heat transport takes place mainly in a metamorphic block composed of gneisses and metabasites that show considerable differences in thermal conductivity and heat production. Therefore, in a second step, the structure of this unit is investigated by seismic waveform modelling. The third step of interpretation consists of applying wavenumber filtering and log-Gabor-filtering for locating fractures. Since fracture networks are the major fluid pathways in the crystalline, we associate the fracture density distribution with distributions of relative porosity and permeability that can be calibrated by logging data and forward modelling of the temperature field. The resulting permeability distribution shows values between 10-16 and 10-19 m2 and does not correlate with particular rock units. Once thermohydraulic rock properties are attributed to the numerical model, the differential equations for heat and fluid transport in porous media are solved numerically based on a finite difference approach. The hydraulic potential caused by topography and a heat flux of 54 mW m-2 were applied as boundary conditions at the top and bottom of the model. Fluid flow is generally slow and

  8. Research on the optimization of delivery capacity during jetting drilling of surface conduct in deep water%深水表层导管喷射钻进过程中钻井液排量优化研究

    Institute of Scientific and Technical Information of China (English)

    周建良

    2012-01-01

    通过喷射法下表层导管模拟试验,综合分析了深水表层导管喷射钻进过程中钻井液排量对钻进速度、表层导管承载力及钻井液携砂能力的影响规律,并在此基础上提出了钻井液排量优化方法.本文研究成果已在我国南海荔湾、流花,西非,以及赤道几内亚等深水钻井实践中取得了成功应用,经济效益显著.%The impact pattern of delivery capacity on bit speed, surface conduct bearing capacity and drill fluid carrying capacity during jetting drilling of surface conduct in deep water is analyzed by simulated test. The optimization method of drill fluid delivery capacity is proposed based on the above result. The optimization method has been applied successfully in the deep water drilling operations in Liwan and Li-uhua oilfields of the South China Sea, as well as in West Africa and Equatorial Guinea, with the remarkable economical benefit obtained.

  9. The design and application of hook position detector for deep drilling%深部钻探大钩位置检测装置的设计与应用

    Institute of Scientific and Technical Information of China (English)

    罗光强; 胡郁乐; 刘狄磊; 杨国巍

    2013-01-01

      地表钻参仪在深孔岩心钻探中可以实时检测和监控钻进参数,优越性明显,其中大钩位置是钻参仪检测的难点。研究了一套大钩位置检测装置,在天车上安装双通道霍尔开关,接收定滑轮上磁钢的脉冲信号,经过数显表头的微处理系统转换,再通过 RS232串口通信连接 PC 机,基 LabVIEW 平台实现数据的采集、分析、显示和存储等工作。该检测装置可以直接测量机上余尺或者方钻杆余尺,计算大钩位置防止撞顶天车,计算二层台位置便挂卸提引器。深钻现场试验表明,该装置安装简便,测试精度高,可用检测立轴式钻机和转盘式钻机大钩位置。%With the increasing contradiction between resource supply and demand, searching deep resources will become our key work in resources exploration. The advantage of surface drilling monitor is distinct as it is able to detect and monitor the drilling parameters in real time during deep drilling, while the testing of hook position re-mains difficult. This paper designs a hook position detector, which installs double channel hall sensors on the crown block to detect the pulse signals, after the transformation of micro programming system within the digital display header, the hander connects PC by serial port and can carry out the acquisition, analysis, presentation and storage of the data based on the LabVIEW platform. We can reap the following benefit by using this detector, test the remaining distance of drilling rig directly, judge the position of the hook in case it crashes into the crown block and calculate the racking platform position for easier putting on and putting off the hoisting swivel elevator. Our deep drilling test in filed has proved that this equipment is easy to install and accurate. It is handy to be applied to detect the hook position of vertical drilling rig and rotary drilling rig.

  10. 深层水平井双聚胺基钻井液技术研究与应用%Research and Application of Double Poly Amine Drilling Fluid Technology in Deep Horizontal Well

    Institute of Scientific and Technical Information of China (English)

    刘永贵; 张洋; 徐用军

    2015-01-01

    针对大庆油田深层致密气埋藏深,储层砾岩、火山岩裂缝发育,水敏性强,钻井过程中易发生漏失、垮塌、缩径及高温钻井液性能变差等复杂,且深层水平井钻进会带来摩阻、携岩和储层污染及使用油基钻井液存在成本高、后期环保压力大等难题,在分析总结前人研究成果及经验基础上,从致密气藏地质特征及深层水平井钻井难点出发,明确了钻井液技术对策,通过开展聚胺和聚醚多元醇“双聚”抑制、封堵防塌剂的研究,配合自主研制的新型高效随钻封堵材料,研发出一套适合于深层致密气藏水平井施工的双聚胺基钻井液技术。室内研究及现场应用表明,该钻井液具有较强的封堵防塌、井眼清洁和润滑防卡能力,抗温达180℃以上,有效地解决了深层水平井漏失、垮塌、携屑、润滑问题和储层保护问题,保证了深层水平井的顺利施工,创造了大庆油田深层水平井钻井周期最短(109 d),井深最深(5048 m),水平段最长(969.22 m),井底温度最高(180℃)等几项新纪录,完全满足了徐家围子地区深层致密气藏的钻探需求,为深层水平井安全、快速、高效钻井提供了技术保障。%According to the complex geological conditions of deep tight gas reservoir in Daqing oilfield, fracture developing in conglomerate and volcano rocks in the reservoir and strong water sensitivity;leakage, collapse, diameter shrinkage and drilling fluid property degradation while drilling at high temperature; friction, cuttings carrying and reservoir pollution in deep horizontal well drilling, as well as the high cost and late environmental protection pressure caused by the use of oil-based drilling fluid, on the basis of the analysis and summary of the previous experience, starting from the geological char-acteristics in tight gas reservoir and difficult points of deep horizontal well

  11. Full-Scale Deep Well Drilling Simulation%全尺寸深井钻井模拟装置对钻井技术发展的影响

    Institute of Scientific and Technical Information of China (English)

    西德尼·格林

    2011-01-01

    缩短钻井周期是降低深井钻井成本和钻井风险的关键,这需要钻井新技术、新工艺、新材料、新工具的研究与应用,这必然要很大程度上依赖于大量的室内试验.斯伦贝谢Terra Tek钻完井实验室有全球最先进的全尺寸钻井模拟试验装置,在30多年间做了大量的模拟试验,试验结果对钻井技术发展、钻头设计、钻井液体系优选及性能优化起到了积极的促进作用.在介绍Terra Tek全尺寸钻井模拟试验装置的组成及主要功能的基础上,分析了该实验室在美国岩石力学协会钻井论坛、冲击钻井及深井钻井模拟试验中取得的主要成果,并介绍了该实验室在页岩气地层特点、开发技术和井眼稳定等方面取得的研究进展.%Deep-well drilling is essential for oil and gas recovery, and in many ways drives the advancement in energy recovery for unconventional and difficult reservoirs. Furthermore,as the world moves more toward unconventional oil and to gas,more and more reliance is placed on drilling. This is particularly true for gas,as more length of drilled hole-much greater lengths of drilled hole-will be required for the same amount of BTU's recovered. Drilling is often the key to economic success and risk reduction. Advancements are being made in drill bits,in drilling muds,and drilling techniques. Unfortunately we cannot "see"the drilling operation at great depths,and must rely on experimentation trial-and-error to a large extent.The field drilling is to some extent a "free" laboratory,and indeed advancements are being made via this field laboratory and trial-an-error experimentation. Unfortunately, there are limitations with this approach,and the introduction of new innovations tends to be slow and limited. However,the Schlumberger TerraTek Drilling and Completions Laboratory offers an opportunity for quantitative measurements that greatly add to the field laboratory observations. The TerraTek Drilling and

  12. Postdepositional losses of methane sulfonate, nitrate, and chloride at the European Project for Ice Coring in Antarctica deep-drilling site in Dronning Maud Land, Antarctica

    Science.gov (United States)

    Weller, R.; Traufetter, F.; Fischer, H.; Oerter, H.; Piel, C.; Miller, H.

    2004-04-01

    We quantified postdepositional losses of methane sulfonate (MSA-), nitrate, and chloride at the European Project for Ice Coring in Antarctica (EPICA) drilling site in Dronning Maud Land (DML) (75°S, 0°E). Analyses of four intermediate deep firn cores and 13 snow pits were considered. We found that about 26 ± 13% of the once deposited nitrate and typically 51 ± 20% of MSA- were lost, while for chloride, no significant depletion could be observed in firn older than one year. Assuming a first order exponential decay rate, the characteristic e-folding time for MSA- is 6.4 ± 3 years and 19 ± 6 years for nitrate. It turns out that for nitrate and MSA- the typical mean concentrations representative for the last 100 years were reached after 5.4 and 6.5 years, respectively, indicating that beneath a depth of around 1.2-1.4 m postdepositional losses can be neglected. In the area of investigation, only MSA- concentrations and postdepositional losses showed a distinct dependence on snow accumulation rate. Consequently, MSA- concentrations archived at this site should be significantly dependent on the variability of annual snow accumulation, and we recommend a corresponding correction. With a simple approach, we estimated the partial pressure of the free acids MSA, HNO3, and HCl on the basis of Henry's law assuming that ionic impurities of the bulk ice matrix are localized in a quasi-brine layer (QBL). In contrast to measurements, this approach predicts a nearly complete loss of MSA-, NO3-, and Cl-.

  13. Description of Tessaracoccus profundi sp.nov., a deep-subsurface actinobacterium isolated from a Chesapeake impact crater drill core (940 m depth).

    Science.gov (United States)

    Finster, K W; Cockell, C S; Voytek, M A; Gronstal, A L; Kjeldsen, K U

    2009-11-01

    A novel actinobacterium, designated CB31(T), was isolated from a 940 m depth sample of a drilling core obtained from the Chesapeake meteor impact crater. The strain was isolated aerobically on R2A medium agar plates supplemented with NaCl (20 g l(-1)) and MgCl2 x 6 H2O (3 g l(-1)). The colonies were circular, convex, smooth and orange. Cells were slightly curved, rod-shaped in young cultures and often appeared in pairs. In older cultures cells were coccoid. Cells stained Gram-positive, were non-motile and did not form endospores. The diagnostic diamino acid of the peptidoglycan was LL: -diaminopimelic acid. The polar lipids included phosphatidylglycerol, diphosphatidglycerol, four different glycolipids, two further phospholipids and one unidentified lipid. The dominant menaquinone was MK-9(H(4)) (70%). The major cellular fatty acid was anteiso C15:0 (83%). The DNA G + C content was 68 mol%. The strain grew anaerobically by reducing nitrate to nitrite or by fermenting glucose. It was catalase positive and oxidase negative. It grew between 10 and 45 degrees C, with an optimum between 35 and 40 degrees C. The pH range for growth was 5.7-9.3, with an optimum at pH 7.5. The closest phylogenetic neighbors based on 16S rRNA gene sequence identity were members of the genus Tessaracoccus (95-96% identity). On the basis of phenotypic and phylogenetic distinctiveness, strain CB31(T) is considered to represent a novel species of the genus Tessaracoccus, for which we propose the name Tessaracoccus profundi sp. nov.. It is the first member of this genus that has been isolated from a deep subsurface environment. The type strain is CB31(T) (=NCIMB 14440(T) = DSM 21240(T)).

  14. Description of Tessaracoccus profundi sp.nov., a deep-subsurface actinobacterium isolated from a Chesapeake impact crater drill core (940 m depth)

    Science.gov (United States)

    Finster, K.W.; Cockell, C.S.; Voytek, M.A.; Gronstal, A.L.; Kjeldsen, K.U.

    2009-01-01

    A novel actinobacterium, designated CB31T, was isolated from a 940 m depth sample of a drilling core obtained from the Chesapeake meteor impact crater. The strain was isolated aerobically on R2A medium agar plates supplemented with NaCl (20 g l-1) and MgCl2???6H 2O (3 g l-1). The colonies were circular, convex, smooth and orange. Cells were slightly curved, rod-shaped in young cultures and often appeared in pairs. In older cultures cells were coccoid. Cells stained Gram-positive, were non-motile and did not form endospores. The diagnostic diamino acid of the peptidoglycan was ll-diaminopimelic acid. The polar lipids included phosphatidylglycerol, diphosphatidglycerol, four different glycolipids, two further phospholipids and one unidentified lipid. The dominant menaquinone was MK-9(H4) (70%). The major cellular fatty acid was anteiso C15:0 (83%). The DNA G + C content was 68 mol%. The strain grew anaerobically by reducing nitrate to nitrite or by fermenting glucose. It was catalase positive and oxidase negative. It grew between 10 and 45??C, with an optimum between 35 and 40??C. The pH range for growth was 5.7-9.3, with an optimum at pH 7.5. The closest phylogenetic neighbors based on 16S rRNA gene sequence identity were members of the genus Tessaracoccus (95-96% identity). On the basis of phenotypic and phylogenetic distinctiveness, strain CB31T is considered to represent a novel species of the genus Tessaracoccus, for which we propose the name Tessaracoccus profundi sp. nov.. It is the first member of this genus that has been isolated from a deep subsurface environment. The type strain is CB31T (=NCIMB 14440T = DSM 21240T). ?? 2009 Springer Science+Business Media B.V.

  15. Lake Nam Co (Tibet, China) - a suitable target for a deep drilling project as confirmed by a preliminary airgun seismic survey

    Science.gov (United States)

    Spiess, V.; Daut, G.; Wenau, S.; Gernhardt, F.; Wang, J.; Schwenk, T.; Haberzettl, T.; Zhu, L.; Maeusbacher, R.

    2014-12-01

    Lake Nam Co, located on the central Tibetan Plateau at the intersection of the Westerlies and the Indian Ocean Summer Monsoon, is well suited to study the monsoonal regime over different time scales. High-resolution and continuous sedimentary records from the Tibetan Plateau are still rare and only few reach back to the Last Glacial Maximum. For Nam Co, numerous multiproxy studies unravel the regional paleoclimate and paleoenvironmental history for the past 24,000 years. These promising results demonstrate the potential of Lake Nam Co as a geoarchive, but nature, thickness and geologic time of the sediment fill have not yet been determined. Therefore the Institute of Tibetan Plateau Research (Chinese Academy of Sciences) and the Universities of Bremen and Jena jointly carried out an airgun multichannel seismic survey at Nam Co in June/July 2014. As main equipment, a micro GI Gun(2 x 0.1 L) was used in conjunction with a 64 m long seismic streamer (32 channels/2 m spacing) to achieve deep signal penetration, to confirm a thick sediment infill and to prove the suitability for deep coring of several hundred meters. Although only few lines could be shot due to technical and weather issues, several lines particularly from the deepest part of the lake provide new insight. Preliminary data processing and interpretation reveal a well layered sediment cover of >700 m in the center of the lake. Seismic facies appears to vary in a cyclic manner, indicating a coupling to climatically-driven changes in lake level and sediment delivery. From a comparison with the Holocene/Late Glacial sedimentary and seismic record, several similar units could be imaged. Furthermore, rapid sedimentation is confirmed from the continuous cover of growth faults and doming, and continuous sedimentation throughout glacial/interglacial cycles appears likely due to the absence of erosional unconformities. By tentatively assigning these units to marine isotope stages, different seismostratigraphies can

  16. The ICDP Dead Sea Deep Drilling Project: An overview and the potential for high-resolution records of floods and droughts in the Levant

    Science.gov (United States)

    Neugebauer, I.; Brauer, A.; Schwab, M. J.; Frank, U.; Dulski, P.; Waldmann, N.; Enzel, Y.; Ariztegui, D.; Hadzhiivanova, E.; Dsddp Scientific Party

    2012-04-01

    High-resolution sedimentary records are essential for a detailed palaeoenvironmental reconstruction of the Levant, which is tightly related to the origin, dispersal and evolution of modern human civilisations. Holocene and late Pleistocene sediments of the Dead Sea are unique archives of the climatic, environmental and tectonic history of the Levant and hence a focus of research. Therefore, during winter of 2010-11 an ICDP-drilling project in the Dead Sea (DSDDP) recovered approximately 720 metres of sediment cores from two deep and several short boreholes with the longest core located in the deepest part of the northern basin reaching 456 m below the lake-floor (at ~710 m below mean lake level). Based on initial geophysical and geochemical analyses of this core, we estimate the record to comprise ca the last 200 ka including the Zeelim (Holocene), Lisan (last Glacial) (Stein, 2001) and Samra (last Interglacial; Waldmann et al., 2009) formations and the later part of the penultimate Glacial (Amora Fm.; Torfstein et al., 2009). Magnetic susceptibility values strongly fluctuate during Interglacial periods, but remain constantly lower in Glacial intervals. Deposition of sediments in the Dead Sea basin is strongly related to precipitation (Enzel et al., 2008) favouring sedimentation of alternated detrital clay and authigenic aragonite during wetter intervals and evaporites (e.g., halite and gypsum) in times of increased aridity and lower lake stands. Detailed initial facies analyses focused on two intervals in the deep core: 1) the upper Lisan Formation from ca 17 to 15 ka BP, and 2) the upper Zeelim Formation from ca 4 to 2 ka BP. Magnetic susceptibility measurements, µXRF element scanning and thin section microscopy allow high-resolution analyses at sub-annual timescales. These combined micro-facies analyses demonstrate the great potential for depicting small-scale variability of climate and even single droughts or flood events. Enzel et al., 2008. Global and

  17. STIMULATION TECHNOLOGIES FOR DEEP WELL COMPLETIONS

    Energy Technology Data Exchange (ETDEWEB)

    Stephen Wolhart

    2003-06-01

    The Department of Energy (DOE) is sponsoring a Deep Trek Program targeted at improving the economics of drilling and completing deep gas wells. Under the DOE program, Pinnacle Technologies is conducting a project to evaluate the stimulation of deep wells. The objective of the project is to assess U.S. deep well drilling & stimulation activity, review rock mechanics & fracture growth in deep, high pressure/temperature wells and evaluate stimulation technology in several key deep plays. Phase 1 was recently completed and consisted of assessing deep gas well drilling activity (1995-2007) and an industry survey on deep gas well stimulation practices by region. Of the 29,000 oil, gas and dry holes drilled in 2002, about 300 were drilled in the deep well; 25% were dry, 50% were high temperature/high pressure completions and 25% were simply deep completions. South Texas has about 30% of these wells, Oklahoma 20%, Gulf of Mexico Shelf 15% and the Gulf Coast about 15%. The Rockies represent only 2% of deep drilling. Of the 60 operators who drill deep and HTHP wells, the top 20 drill almost 80% of the wells. Six operators drill half the U.S. deep wells. Deep drilling peaked at 425 wells in 1998 and fell to 250 in 1999. Drilling is expected to rise through 2004 after which drilling should cycle down as overall drilling declines.

  18. DAME: planetary-prototype drilling automation.

    Science.gov (United States)

    Glass, B; Cannon, H; Branson, M; Hanagud, S; Paulsen, G

    2008-06-01

    We describe results from the Drilling Automation for Mars Exploration (DAME) project, including those of the summer 2006 tests from an Arctic analog site. The drill hardware is a hardened, evolved version of the Advanced Deep Drill by Honeybee Robotics. DAME has developed diagnostic and executive software for hands-off surface operations of the evolved version of this drill. The DAME drill automation tested from 2004 through 2006 included adaptively controlled drilling operations and the downhole diagnosis of drilling faults. It also included dynamic recovery capabilities when unexpected failures or drilling conditions were discovered. DAME has developed and tested drill automation software and hardware under stressful operating conditions during its Arctic field testing campaigns at a Mars analog site.

  19. 考虑粒径分布的深水环空岩屑浓度研究及应用%Research and Application of Annulus Solid Content Considering the Cuttings Size Distribution during Deep-water Drilling

    Institute of Scientific and Technical Information of China (English)

    夏环宇; 翟应虎; 王磊; 陈静; 张毅

    2011-01-01

    深水低温对钻井液性能影响显著,其黏度和切力的改变使深水携岩与常规陆上钻井不同.由于温度降低带来钻井液性能的改变对不同粒径岩屑上返速度的影响程度不同,因此在深水携岩研究中,考虑岩屑粒径分布是必要的.分析了温度变化对钻井液影响,建立了考虑岩屑粒径大小及粒径分布、机械钻速及钻井循环时间等影响因素的深水钻井分岩屑粒径的环空浓度计算新模型,从而获得了深水钻井中全井及井眼各段环空内岩屑浓度大小及其浓度随循环时间变化的分布与变化规律;并在现场深水钻井岩屑浓度的分析计算中,取得了良好的应用效果.%Drilling fluid performance can be influenced significantly under low temperature in deep-water drilling. The change of viscosity and shear force make cutting transport in deep-water drilling different from onshore drilling. Due to the different influence on sinking speed of different size cuttings with temperature changed, it is necessary to consider the particle size distribution for the cutting carry in deepwater drilling. The factor of rheological behavior varied with temperature changing, drilling cuttings size and its distribution, rate of penetration (ROP) and circulation time in drilling are considered, the new model of cuttings proportion calculation in wellbore annular is established, which can calculate the proportion in each hole and the full well sections and indicate the rule of proportion changed with time-varying. The model is applied in the calculation of solid content in the oil field and a good effect has been achieved.

  20. Riserless drilling (managed pressure drilling)

    OpenAIRE

    Khan, Ahsan

    2012-01-01

    There are several problems which an oil and gas industry is facing. These problems can be solved by riserless drilling method which comes under managed pressure drilling umbrella. The most important problem is increasing number of casing strings to complete a well and to control a well in limited pressure profile. A well model was developed and both conventional and riserless drilling approaches were applied to see how many casings will be needed to complete a same well with these approach...

  1. A case study on riser analysis of a drilling riser in deep waters; Estudo de caso: analises estruturais e hidrodinamicas de um riser de perfuracao em aguas profundas

    Energy Technology Data Exchange (ETDEWEB)

    Roveri, Francisco E.; Pestana, Rafael G. [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil). Centro de Pesquisas

    2008-07-01

    This paper presents a set of structural and hydrodynamic analyses of a connected marine riser, in 1900 meter water depth. Operating windows are determined for one year return period environmental conditions and for a set of drilling fluid weight density values. Parametric analyses are carried out to study the riser response sensitivity to variations in environmental conditions, drilling fluid weight density, upper and lower flex joint rotational stiffness and vessel motion phase angles. Current, drilling fluid weight density and vessel motion phase angle changes affect significantly the system response, whereas the response is not significantly affected by changes in wave height, wave period and flex joint rotational stiffness. (author)

  2. Iceland Deep Drilling Project: (V) Isotopic Evidence of Hydrothermal Exchange and Seawater Ingress from Alteration Minerals in the Reykjanes Geothermal System

    Science.gov (United States)

    Marks, N. E.; Zierenberg, R. A.; Schiffman, P.

    2009-12-01

    The Reykjanes geothermal system is a seawater recharged hydrothermal system located on the landward extension of the Mid-Atlantic Ridge in Iceland. Fluid compositions in the system have evolved through time as a result of changing proportions of meteoric water as well as differing pressure and temperature conditions imposed by glaciation (Sveinbjornsdottir, 1986; Fridleifsson et al., 2005; Marks et al., 2009). Samples from the deepest part of Reykjanes well RN-17 include greenschist to pyroxene hornfels facies assemblages, suggesting seawater penetration into a part of the system that is close to the high temperature reaction zone. Electron microprobe studies of drill cuttings reveal intense alteration of hyaloclastites with calc-silicate alteration assemblages comprising calcic hydrothermal plagioclase, grandite garnet, prehnite, epidote, hydrothermal clinopyroxene, and titanite. In contrast, crystalline basalts and intrusive rocks display a wide range in alteration intensity from essentially unaltered to pervasive and nearly complete replacement of feldspar and pyroxene. Epidote is widely distributed throughout the RN-17 samples and fills veins and vugs, replaces glass in hyaloclastites and the interstitial matrix of basalt samples, and is also an alteration product of primary plagioclase. 87Sr/86Sr values of individual epidote grains measured by LA-ICPMS were typically 0.7045-0.7050, but ranged as high as 0.7073 in individual grains. Anhydrite is widespread in shallow portions of the Reykjanes system to about 1500 m. 87Sr/86Sr values of anhydrite from the Reykjanes geothermal system range from 0.7044-0.7053, and gypsum values range from 0.7093 to 0.7094. The Sr isotopic ratios of alteration minerals are shifted from basaltic values (0.7030-0.7034; O’Nions and Grönvold, 1973; Sun and Jahn, 1975) toward seawater values (0.70916; Palmer and Edmond, 1989). This suggests that seawater Sr is able to penetrate deep within the geothermal system, and that seawater Sr

  3. 超深井钻机顶驱减速箱的结构设计与仿真%Design and analysis on top drive gearbox of ultra-deep drilling rig

    Institute of Scientific and Technical Information of China (English)

    张春鹏; 于萍; 张鹏; 王耀华

    2013-01-01

    In current drilling system, the efficiency of top drive system can greatly be improved. The reduction gearbox is a core component of a power system. In terms of lower drilling capacity in the current drilling system, with the analysis of drilling process, using the theory of parameterized modeling, this study designs the structure of gearbox and simulates its engagement force. Based on Hertz theory, the contact force parameters are derived and the gear model is built. Its kinematics and dynamics performance are analyzed using ADAMS. Therefore, the curve of time domain and frequency in engagement force is obtained. Through design and analysis, the virtual prototype meets the design requirements and saves drilling time. The study provides a technological reference for future research on deep exploration technology.%  针对目前钻井系统钻探能力较低的问题,通过对钻井过程的分析,采用参数化建模的方法,对钻机顶驱减速箱进行详细的结构设计,并对其进行了齿轮啮合力的分析。基于 Hertz 理论建立斜齿轮的接触力仿真参数,建立齿轮接触模型,运用 ADAMS 软件进行运动学仿真,得出齿轮啮合力的时域和频域曲线。通过设计与分析,所建立的虚拟样机符合设计要求,节约钻井时间,并为中国深部探测技术的研究提供了技术参考。

  4. Drilling reorganizes

    Science.gov (United States)

    Richman, Barbara T.

    As the first in a proposed series of steps that would move scientific ocean drilling from its own niche within the National Science Foundation's (NSF) Directorate for Astronomical, Atmospheric, Earth, and Ocean Sciences (AAEO) into the agency's Division of Ocean Sciences, Grant Gross, division director, has been appointed acting director of the Office of Scientific Ocean Drilling (OSOD). Gross will retain the directorship of the division, which also is part of AAEO. Allen M. Shinn, Jr., OSOD director for nearly 2 years, has been reassigned effective July 10 to a position in NSF's Office of Planning and Resource Management.The move aims to tie drilling operations more closely to the science with which it is associated, Gross said. This first step is an organizational response to the current leaning toward using a commercial drilling vessel as the drilling platform, he said. Before the market for such commercial drill ships opened (Eos, February 22, 1983, p . 73), other ship options for scientific ocean drilling included refurbishing the aging Glomar Challenger or renovating, at great expense, the Glomar Explorer. A possible next step in the reorganization is to make OSOD the third section within the Ocean Sciences Division. Currently, the division is divided into the Oceanographic Facilities and Support Section and the Ocean Sciences Research Section.

  5. Advances in core drilling technology

    Science.gov (United States)

    Holdsworth, G.

    Some notable technical advances in drill design were reported at the meeting, held in Canada August 30-September 1, 1982, at the University of Calgary. Chief amongst these was a battery powered, computer assisted electromechanical core drill which has recently been used by the Danes in Greenland to continuously core to the base of the ice sheet at 2038 m. This is the deepest coring operation so far on the Greenland ice sheet. (The record for deep glacier drilling is held by the U.S. Army Cold Regions Research and Engineering Laboratory for the continuous coring through 2164 m of ice to bedrock at Byrd Station, Antarctica, in 1968). In early 1982, a current Soviet core drilling operation was reported to be at a depth of 2000 m at Vostok station, Antarctica, where the total ice thickness is about 4000 m; the goal of core drilling the entire ice thickness there could be achieved before the end of 1983.

  6. An Industry/DOE Program to Develop and Benchmark Advanced Diamond Product Drill Bits and HP/HT Drilling Fluids to Significantly Improve Rates of Penetration

    Energy Technology Data Exchange (ETDEWEB)

    TerraTek

    2007-06-30

    A deep drilling research program titled 'An Industry/DOE Program to Develop and Benchmark Advanced Diamond Product Drill Bits and HP/HT Drilling Fluids to Significantly Improve Rates of Penetration' was conducted at TerraTek's Drilling and Completions Laboratory. Drilling tests were run to simulate deep drilling by using high bore pressures and high confining and overburden stresses. The purpose of this testing was to gain insight into practices that would improve rates of penetration and mechanical specific energy while drilling under high pressure conditions. Thirty-seven test series were run utilizing a variety of drilling parameters which allowed analysis of the performance of drill bits and drilling fluids. Five different drill bit types or styles were tested: four-bladed polycrystalline diamond compact (PDC), 7-bladed PDC in regular and long profile, roller-cone, and impregnated. There were three different rock types used to simulate deep formations: Mancos shale, Carthage marble, and Crab Orchard sandstone. The testing also analyzed various drilling fluids and the extent to which they improved drilling. The PDC drill bits provided the best performance overall. The impregnated and tungsten carbide insert roller-cone drill bits performed poorly under the conditions chosen. The cesium formate drilling fluid outperformed all other drilling muds when drilling in the Carthage marble and Mancos shale with PDC drill bits. The oil base drilling fluid with manganese tetroxide weighting material provided the best performance when drilling the Crab Orchard sandstone.

  7. 准时化生产方式所采用技术的互动原理研究%Study for Reciprocal Causation Principles about the Techniques of Just in Time

    Institute of Scientific and Technical Information of China (English)

    孔造杰; 张海娟

    2001-01-01

    With the analysis of the basic idea of Just in Time, the basic principal and application methods for several mature techniques of Just in Time are discussed particularly. Furthermore, the connection of infection and stimulation each other of the mature techniques of Just in Time is studied deeply. New thought for Just in Time practice application is exploited.%在分析准时化生产方式基本思想的基础上,详细探讨了与准时化生产方式有关的各项成熟技术的基本原理和应用方法,进而深入研究了准时化生产方式各项成熟技术之间所存在的相互影响、相互促进的密切关系,为其实际应用开拓了新的思路。

  8. Active seismic monitoring of changes of the reflection response of a crystalline shear zone due to fluid injection in the crust at the Continental Deep Drilling Site, Germany

    Science.gov (United States)

    Beilecke, T.; Kurt, B.; Stefan, B.

    2005-12-01

    In theory and in the laboratory variations of the hydraulic pressure can be detected with seismic methods: A lowering of the hydraulic pressure leads to the closure of micro-cracks within the rock (increase of the differential or effective pressure). Subsequently, the seismic velocities increase. An increase of the hydraulic pressure leads to reverse seismic effects. Consequently, seismic impedance contrasts and associated reflection amplitudes vary in the case of a propagating fluid pressure front in a rock matrix with inhomogeneous permeability - as is the case at shear zones. The largest amplitude changes can be expected with vertical ray inclination on the impedance contrast. Generally, the expected effects are small however (Kaselow, 2004). The practical utilization of active seismics for the detection of pressure changes at large scale in hard rock is currently being studied at the Continental Deep Drilling Site (KTB). The injection of water (200 l/min) in a depth of about 4000 m into the so-called SE2 shear zone in the KTB pilot hole was monitored with active seismics between May 2004 and April 2005. The core of the experiment layout is a fixed 5-arm geophone array consisting of 24 3-component geophones, buried at about 70 cm depth. The source signal is a vertical vibrator sweep of 30 s length with the spectrum 30-120 Hz. The signal is sent into the ground 32 times during each cycle, detected with the array and recorded separately for each geophone channel, without prior correlation with the source signal. This allows maximum post-processing with seismic processing and analysis tools and especially permits the use of array properties to increase the signal-to-noise ratio. Critical parameters of the experiment are the repeatability of the source signal as well as the stability of the receiver properties. Another pivot is the hydraulic pressure and its distribution built up within the rock matrix. Estimations based on model calculations show that a change of

  9. 深水钻井送入管柱卡瓦挤毁载荷模型研究%Study on the model of landing string's slip crushing loads in deep water drilling

    Institute of Scientific and Technical Information of China (English)

    朱荣东; 周建良; 蒋世全; 姜伟

    2013-01-01

    针对深水钻井中容易发生卡瓦挤毁送入管柱的问题,详细分析了管柱-卡瓦之间相互作用的机理,利用厚壁圆筒理论等相关力学理论建立了计算卡瓦挤毁载荷的新模型,并进行了模型验证和实例计算,结果表明本文建立的新模型可作为深水钻井送入管柱设计校核的依据,所计算出的送入管柱的作业窗口可以为现场应急事故处理提供指导,从而保障深水钻井作业的安全.%In view of the problem of slip crushing landing string,this paper has analyzed the interaction mechanism between the drill pipe and slip in detail, established a new model of landing string's slip crushing loads by thick-wall cylinder theory and related mechanical theory,also tested the model and performed a case calculation. The results show that the new model can be used as a design basis for landing string used in deep water drilling. The calculated operating window of landing string can provide a guidance for on-site emergency incident handling, thus protecting the safety of deep water drilling operation.

  10. Drilling Systems for Extraterrestrial Subsurface Exploration

    Science.gov (United States)

    Zacny, K.; Bar-Cohen, Y.; Brennan, M.; Briggs, G.; Cooper, G.; Davis, K.; Dolgin, B.; Glaser, D.; Glass, B.; Gorevan, S.; Guerrero, J.; McKay, C.; Paulsen, G.; Stanley, S.; Stoker, C.

    2008-06-01

    Drilling consists of 2 processes: breaking the formation with a bit and removing the drilled cuttings. In rotary drilling, rotational speed and weight on bit are used to control drilling, and the optimization of these parameters can markedly improve drilling performance. Although fluids are used for cuttings removal in terrestrial drilling, most planetary drilling systems conduct dry drilling with an auger. Chip removal via water-ice sublimation (when excavating water-ice bound formations at pressure below the triple point of water) and pneumatic systems are also possible. Pneumatic systems use the gas or vaporization products of a high-density liquid brought from Earth, gas provided by an in situ compressor, or combustion products of a monopropellant. Drill bits can be divided into coring bits, which excavate an annular shaped hole, and full-faced bits. While cylindrical cores are generally superior as scientific samples, and coring drills have better performance characteristics, full-faced bits are simpler systems because the handling of a core requires a very complex robotic mechanism. The greatest constraints to extraterrestrial drilling are (1) the extreme environmental conditions, such as temperature, dust, and pressure; (2) the light-time communications delay, which necessitates highly autonomous systems; and (3) the mission and science constraints, such as mass and power budgets and the types of drilled samples needed for scientific analysis. A classification scheme based on drilling depth is proposed. Each of the 4 depth categories (surface drills, 1-meter class drills, 10-meter class drills, and deep drills) has distinct technological profiles and scientific ramifications.

  11. General Considerations for Drill System Design

    Science.gov (United States)

    1975-06-01

    meltwater can bu absorbed and refrozen in the adjacent snow. A similar principle has been suggested for disposal of melted rock produced by thermal...This last item can become very serious if the drill is immersed in meltwater . Ileat losses at the drill head are not easy to estimate in simple...Phlslberth, K. (in pr is) The thermal probe deep drilling method by E016 in 1968 at Station jul-Joaet. Central Greenland , Proceedings of icr Core

  12. Study on real-time ultra-sonic kick detection technique along riser during deep water drilling operations%深水钻井沿隔水管超声波气侵实时监测技术研究

    Institute of Scientific and Technical Information of China (English)

    耿亚楠; 李轶明; 朱磊; 马昭华; 朱连望; 周云健

    2016-01-01

    早期溢流监测对预防石油开发钻井过程中井喷失控恶性事故具有至关重要的作用.深水钻井作业过程中在不破坏钻井隔水管力学结构的前提下,基于非接触式超声波测量手段沿程监测隔水管内部钻井液流动特征参数,设计了适合深水钻井隔水管气侵监测系统.实验模拟分析了深水钻井隔水管气侵监测系统超声波时差法和超声波多普勒法的气侵监测效果,结果表明:超声波时差法虽然在清水中可以实现含气率测量,但是对于水基钻井液并不适合;极小含气情况下,多普勒频移量出现极大衰减,并随着含气率的增加而下降,因此超声波多普勒方法对气侵早期识别具有可行性.上述成果对于深水钻井早期溢流监测有指导意义.%Early kick detection is of great significance to prevent blowout in well drilling operations.During deep water drilling operations,early kick detection can be realized by using non-intrusive ultrasonic meas-urements to monitor the flow characteristics of the drilling fluid inside the riser without changing the riser's mechanical structure.And then the kick detection system for deep water drilling operations was designed. The phenomena of kicking inside the riser were experimentally investigated in the laboratory by ultrasonic time difference method and ultrasonic Doppler method.It is found that the time difference method is suit-able to measure the void fraction of water,but not for the water-based drilling fluid.It is also found that the frequency shift of Doppler severely attenuates when the void fraction is tiny,and it keeps decreasing as the void fraction increases.Hence the feasibility of using Doppler method to detect the early kick inside the riser is proved from this study.The above findings can be used for guiding the early kick detection during deep water drilling operations.

  13. Recent trends of deep offshore exploration. From `Survey of Trends and Problems in Floating Structure Operating Technology for Deep Offshore Drilling Systems`; Daisuishin kaiiki ni okeru saikin no tanko kaihatsu doko ni tsuite. `Daisuishin kussaku system no futai un`yo gijutsu i kansuru doko to mondaiten no chosa` yori

    Energy Technology Data Exchange (ETDEWEB)

    Hosomi, A. [The Institute of Energy Economics, Tokyo (Japan)

    1998-06-01

    Japan National Oil Corporation`s survey for fiscal 1997 of deepsea mine exploration and exploitation in the world is described. The survey discloses that future potentials are high in the Mediterranean, Asia, and Oceania although the generally known main deepsea oil-producing zones of the world belong in the Atlantic, as exemplified by the western part of the North Sea. The level of oil exploitation in the ocean that has been 200m or shallower in the past is now advancing deeper toward levels lower than 1000m. As for pilot drilling, although a 2000m-deep level is regarded as the limit beyond which progress deeper would be difficult, yet drilling into a 3000m-deep level is now being planned. Among drilling contractors, reorganization is under way through merger and acquisition. Although the total number of rigs has reduced, demand for rigs turned strong in 1996, and the number of rigs is increasing rapidly through new construction or refurbishment. As for ocean development systems, various practical applications have added to the list of available systems. 3 figs., 6 tabs.

  14. Redução de custos no sistema just-in-time: um estudo em uma empresa de confecções de São José de Mipibu

    OpenAIRE

    Freitas, Matheus Furtado de Assunção; Andrade, Thiago Tavares de; Lima, Victor Godeiro de Medeiros; Vieira, Edzana Roberta Ferreira da Cunha

    2011-01-01

    Essa pesquisa apresenta os resultados de um estudo exploratório realizado em uma empresa de confecções situada em Sáo José do Mipibu, no Estado do Rio Grande do Norte, a respeito da aplicabilidade do Just in Time e correspondente controle de custos. Iniciou-se a produçáo do trabalho por meio de pesquisas bibliográficas realizadas em livros, artigos de periódicos, internet e periódicos. Essa pesquisa serviu de base teórica para alcançar o objetivo principal de identificar os sistemas de...

  15. Just in time delivery as a product of logistics solution from a perspective of an ocean carrier / Ulrich Jasser = Система доставки товаров "Точно в срок" (Just in time) как продукт логистических

    Index Scriptorium Estoniae

    Jasser, Ulrich

    2003-01-01

    Ettekanne 3.-4. detsembrini 2003 Tallinnas toimunud rahvusvahelisel konverents-näitusel "Logistics and transport in international trade" tutvustab ookeanivedudel kasutatavat logistikateenust "Just in time". Kaardid. Diagramm. Tabel

  16. Just in time delivery as a product of logistics solution from a perspective of an ocean carrier / Ulrich Jasser = Система доставки товаров "Точно в срок" (Just in time) как продукт логистических

    Index Scriptorium Estoniae

    Jasser, Ulrich

    2003-01-01

    Ettekanne 3.-4. detsembrini 2003 Tallinnas toimunud rahvusvahelisel konverents-näitusel "Logistics and transport in international trade" tutvustab ookeanivedudel kasutatavat logistikateenust "Just in time". Kaardid. Diagramm. Tabel

  17. Fiscal 1995 report on the results of the subsidy operation under the Sunshine Project on the development of a geothermal water use power plant, etc. Development of the deep geothermal resource collecting technology (development of the deep geothermal resource drilling technology); 1995 nendo New Sunshine keikaku hojo jigyo seika hokokusho. Nessui riyo hatsuden plant nado kaihatsu (shinbu chinetsu shigen saishu gijutsu no kaihatsu / shinbu chinetsu shigen kussaku gijutsu no kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The paper reported the results of the fiscal 1995 R and D on the development of deep geothermal resource collecting/drilling technology. In the design of a total development, the trend of technical development was examined of bits, cement and DHM overseas. Further, the simulational prediction was conducted in deep geothermal drilling. As to the development of element technology of hard high temperature strata drilling, the R and D of seal mechanism, bearing mechanism and cutter mechanism were carried out aiming at developing heat resistant/durable bits, and a bit was trially manufactured which was integrated with element parts selected by each element technology. Concerning the development of high temperature drilling mud, studies were made of the development of drilling mud materials, a mud system, etc. Relating to the development of high temperature cement slurry, the development was conducted of high temperature cement, dewatering adjusting agents, etc. As to the development of high accuracy much inclination drilling technology, in the development of high temperature use downhole motor, tests on heat resistance/durability were carried out in the mud of 12 kinds of high heat resistant stator materials. 175 figs., 137 tabs.

  18. Key Technology on Deep-Water Semi-Submersible Drilling Platform:Global Performance;Structure Analysis;Vortex-Induced Vibration

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    谢彬杨建民主编上海交通大学出版社出版定价:$150.00内容简介:This book is based on the project Research on the Key Technology of3 000m Deepwater Semi-Submersible Drilling Platform aiming at solving the key issues of design and construction techniques.It contains 5parts,

  19. Description of Tessaracoccus profundi sp.nov., a deep-subsurface actinobacterium isolated from a Chesapeake impact crater drill core (940 m depth)

    DEFF Research Database (Denmark)

    Finster, Kai; Cockell, C.S.; Voytek, M.A.

    2009-01-01

    A novel actinobacterium, designated CB31T, was isolated from a 940 m depth sample of a drilling core obtained from the Chesapeake meteor impact crater. The strain was isolated aerobically on R2A medium agar plates supplemented with NaCl (20 g l-1) and MgCl2·6H2O (3 g l-1). The colonies were...

  20. Fiscal 1996 report on the results of the subsidy operation under the Sunshine Project on the development of a geothermal water use power plant, etc. Development of the deep geothermal resource collecting technology (development of the deep geothermal resource drilling technology); 1996 nendo New Sunshine keikaku hojo jigyo seika hokokusho. Nessui riyo hatsuden plant nado kaihatsu (shinbu chinetsu shigen saishu gijutsu no kaihatsu / shinbu chinetsu shigen kussaku gijutsu no kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The paper reported the results of the fiscal 1996 R and D on the development of deep geothermal resource collecting/drilling technology. In the design of a total development, the planned adjustment of actual well tests was conducted on bits and drilling mud at the time of drilling the exploration well of the Kakkonda area. As to the trend of overseas technology, examined was the developmental trend of high temperature type downhole motor products. In the development of hard high temperature strata drilling element technology, a drilling test was carried out on trially manufactured 300degC heat resistant/durable bits. In the development of high temperature drilling mud, drilling was done in the mud of thermally stable quality in the actual well experiment using the 300degC mud system. In the development of high temperature use cement and high temperature use cement slurry, a possibility was obtained of composing a slurry which has the targeted dewatering amount, compressive strength, and water permeability. In the development of high temperature downhole motor, data on characteristics of heat resistant stator materials were arranged in a relationship among the abrasion amount, thermal expansion amount and elastic recovery amount, and the database was obtained. 166 figs., 148 tabs.

  1. Laser Drilling Practical Applications

    CERN Document Server

    Yilbas, Bekir Sami

    2013-01-01

    This book introduces laser drilling processes including modelling, quality assessment of drilled holes, and laser drilling applications. It provides insights into the laser drilling process and the relation among the drilling parameters pertinent to improved end product quality. This book is written for engineers and scientists working on laser machining, particularly laser drilling.

  2. FY 1983 Funding for ocean drilling

    Science.gov (United States)

    Richman, Barbara T.

    Proposed funding for scientific ocean drilling within the National Science Foundation (NSF) in fiscal 1983 totals $14 million, $6 million less than the current fiscal 1982 plan and about half of the original FY 1982 budget request of $26 million. However, there is more to these numbers than simple subtraction: Additional funding for scientific ocean drilling programs is on hold while decisions are being made about a future drilling program called Advanced Ocean Drilling (AOD).With the demise of the Ocean Margin Drilling Program (OMDP) when industry withdrew its support (Eos, October 20, 1981, p. 705) and with the Deep Sea Drilling Project (DSDP) long ago scheduled to end in fiscal 1983, the future for scientific ocean drilling within NSF was uncertain. To steer ocean drilling toward scientific objectives for the decade, the Conference on Scientific Ocean Drilling (COSOD) (Eos, December 22, 1981, p. 1197) examined four ocean drilling options and decided that the Glomar Explorer, converted to the current capabilities of the DSDP mainstay Glomar Challenger (i.e., without riser and well-control technologies), would meet scientific objectives through the decade. In December, the National Research Council's Committee on Ocean Margin Drilling came to the identical conclusion in its interim report. Both of these decisions were based solely on scientific merit and did not consider costs.

  3. Just-in-Time Simulation Platform Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Long-duration missions may one day present the most demanding situations ever encountered in manned spaceflight. Success will therefore depend on the knowledge and...

  4. The Just-in-time psychopathology

    Directory of Open Access Journals (Sweden)

    Salvatore Cavaleri

    2015-05-01

    Full Text Available In this article the author examines some significant passages of his treatment of a patient with borderline personality structure, with the intention of giving a formative contribution to the delicate issue of the search for congruence between theory and clinic operations. This reflection is therefore an opportunity to integrate these aspects. The individualization of the therapeutic relationship in the theoretical framework of group analysis allowed the emotional investment in the person of the therapist, which is useful in the construction of a meaningful relationship on the human, emotional and cognitive plane; a space within which it has become increasingly possible for Sara, share and process emotions, re-build, contact parts of the self frustrated and disappointed, perceive less and less the void and become less vulnerable, being able to pull over to the original trauma. 

  5. Just in Time to Flip Your Classroom

    Science.gov (United States)

    Lasry, Nathaniel; Dugdale, Michael; Charles, Elizabeth

    2014-01-01

    With advocates like Sal Khan and Bill Gates, flipped classrooms are attracting an increasing amount of media and research attention. We had heard Khan's TED talk and were aware of the concept of inverted pedagogies in general. Yet it really hit home when we accidentally flipped our classroom. Our objective was to better prepare our students…

  6. Just in Time Research: Privacy Practices

    Science.gov (United States)

    Grama, Joanna Lyn

    2014-01-01

    The January 2014 edition of the ECAR Update subscriber newsletter included an informal poll on information privacy practices. The poll was intended to collect a quick snapshot of the higher education community's thoughts on this important topic during Data Privacy Month. Results of the poll will be used to inform EDUCAUSE research, programs,…

  7. Just in time for late-LTP

    Science.gov (United States)

    Vlachos, Andreas; Maggio, Nicola

    2008-01-01

    It is a fundamental question in neuroscience how long-term memory formation is regulated at the molecular level. Although widely considered a highly complex process requiring numerous molecular players, it also has been speculated that a single protein could play a pivotal role. This “astonishing hypothesis” has made a significant impact on memory research and has led to a reevaluation of concepts regarding memory formation.1,2 PMID:19513256

  8. Fragmente des Logistikkonzeptes "super just in time"

    OpenAIRE

    Witte, Hermann

    2012-01-01

    Darstellung von Elementen für die Entwicklung eines neuen Logistikkonzeptes unter Berücksichtigung des Logistikdilemmas, der Arbeitsteilungsfalle, dem Gesetz der Massenproduktion, dem Dilemma der Ablaufplanung und einem Managementkonzept. Demonstration of elements for the construction of a new concept of logistics by regarding the dilemma of logistics, the trap of division of labor, the law of mass production, the dilemma of process organization and a concept of management.

  9. Just-in-Time og Lean Manufacturing

    DEFF Research Database (Denmark)

    Michelsen, Aage U.

    2004-01-01

    Filosofi, principper og teknikker i JIT. Princip i Kanban-styring og dimensionering af et Kanban-system. Lean Thinking og Value Stream Mapping.......Filosofi, principper og teknikker i JIT. Princip i Kanban-styring og dimensionering af et Kanban-system. Lean Thinking og Value Stream Mapping....

  10. Just in Time to Flip Your Classroom

    Science.gov (United States)

    Lasry, Nathaniel; Dugdale, Michael; Charles, Elizabeth

    2014-01-01

    With advocates like Sal Khan and Bill Gates, flipped classrooms are attracting an increasing amount of media and research attention. We had heard Khan's TED talk and were aware of the concept of inverted pedagogies in general. Yet it really hit home when we accidentally flipped our classroom. Our objective was to better prepare our students…

  11. Just-in-Time Simulation Platform Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Long duration spaceflight and exploration missions will require complex operations and demanding tasks. Success will therefore depend on the knowledge and...

  12. Just-in-Time og Lean Manufacturing

    DEFF Research Database (Denmark)

    Michelsen, Aage U.

    2004-01-01

    Filosofi, principper og teknikker i JIT. Princip i Kanban-styring og dimensionering af et Kanban-system. Lean Thinking og Value Stream Mapping.......Filosofi, principper og teknikker i JIT. Princip i Kanban-styring og dimensionering af et Kanban-system. Lean Thinking og Value Stream Mapping....

  13. Interdisciplinary just-in-time teaching

    DEFF Research Database (Denmark)

    Christensen, Hans Peter

    2008-01-01

    An active learning methodology in engineering education has been developed based on general pedagogical principles adapted to a mixed student group including students from a population with little tradition for higher education. So far it has been successful with engaged students and teachers...

  14. Interdisciplinary just-in-time teaching

    DEFF Research Database (Denmark)

    Christensen, Hans Peter

    2008-01-01

    An active learning methodology in engineering education has been developed based on general pedagogical principles adapted to a mixed student group including students from a population with little tradition for higher education. So far it has been successful with engaged students and teachers and...

  15. Bucket drill

    Energy Technology Data Exchange (ETDEWEB)

    Bezverkhiy, V.M.; Nabokov, I.M.; Podoksik, D.Z.; Sadovskiy, S.S.; Shanyukevich, V.A.

    1983-01-01

    The bucket drill including a cylindrical housing with bottom, ground intake windows and cutting knives is hinged to the housing, the mechanism of rotation of the cutting knives including rods connected by the cutter knives, and drive shaft is distinguished by the fact that in order to improve the effectiveness of drilling by automatic change in the angle of cutting depending on the strength of the drillable rock, the drill is equipped with elastic elements and cap with annular slits in which there are elastic elements. The mechanism of rotation of the cutting knives is equipped with levers hinged to the housing, pins with shaft and rocker arm. The rods are made with a slit and from one end are rigidly connected to the cutting knives, and from the other end to the levers by means of pins which are arranged in slits of the rod with the possibility of movement. The upper ends of the levers are installed with the possibility of movement in the pins whose shafts are arranged with the possibility of rotation in the rocker arm rigidly connected to the drive shaft. The drive shaft is equipped with cantilevers installed in the cap with the possibility of rotation and interaction with the elastic elements.

  16. Ultra-Deepwater Riserless Mud Circulation with Dual Gradient Drilling

    Directory of Open Access Journals (Sweden)

    Greg Myers

    2008-07-01

    Full Text Available Drilling deep holes in very deep water presents the offshore drilling community with major wellbore stability challenges that are typically mitigated through the circulation of dense drilling mud to prevent hole collapse and to remove drilling debris (“cuttings”. This is normally accomplished through the application of a riser system (Fig. 1; however, riser lengths ; are presently limited to use in water depths of around 3047 m. In the scientific ocean drilling realm, we have been very successful in drilling relatively shallow holes (<1500 m in water depths greater than 3657 m, a range we call “hyper-deep”. Drilling in these extreme water depths requires the use of the “riserless” drilling technique (Fig. 1A which is not constrained by the length limitations of a riser system (“riser”.

  17. IODP workshop: developing scientific drilling proposals for the Argentina Passive Volcanic Continental Margin (APVCM) - basin evolution, deep biosphere, hydrates, sediment dynamics and ocean evolution

    Science.gov (United States)

    Flood, Roger D.; Violante, Roberto A.; Gorgas, Thomas; Schwarz, Ernesto; Grützner, Jens; Uenzelmann-Neben, Gabriele; Hernández-Molina, F. Javier; Biddle, Jennifer; St-Onge, Guillaume; Workshop Participants, Apvcm

    2017-05-01

    The Argentine margin contains important sedimentological, paleontological and chemical records of regional and local tectonic evolution, sea level, climate evolution and ocean circulation since the opening of the South Atlantic in the Late Jurassic-Early Cretaceous as well as the present-day results of post-depositional chemical and biological alteration. Despite its important location, which underlies the exchange of southern- and northern-sourced water masses, the Argentine margin has not been investigated in detail using scientific drilling techniques, perhaps because the margin has the reputation of being erosional. However, a number of papers published since 2009 have reported new high-resolution and/or multichannel seismic surveys, often combined with multi-beam bathymetric data, which show the common occurrence of layered sediments and prominent sediment drifts on the Argentine and adjacent Uruguayan margins. There has also been significant progress in studying the climatic records in surficial and near-surface sediments recovered in sediment cores from the Argentine margin. Encouraged by these recent results, our 3.5-day IODP (International Ocean Discovery Program) workshop in Buenos Aires (8-11 September 2015) focused on opportunities for scientific drilling on the Atlantic margin of Argentina, which lies beneath a key portion of the global ocean conveyor belt of thermohaline circulation. Significant opportunities exist to study the tectonic evolution, paleoceanography and stratigraphy, sedimentology, and biosphere and geochemistry of this margin.

  18. [The new eubacterium Roseomonas baikalica sp. nov. isolated from core samples collected by deep-hole drilling of the bottom of Lake Baĭkal].

    Science.gov (United States)

    Andreeva, I S; Pechurkina, N I; Morozova, O V; Riabchikova, E I; Belikov, S I; Puchkova, L I; Emel'ianova, E K; Torok, T; Repin, V E

    2007-01-01

    Microbiological analysis of samples of sedimentary rocks from various eras of the geological history of the Baikal rift has enabled us to isolate a large number of microorganisms that can be classified into new, previously undescribed species. The present work deals with the identification and study of the morphological, biochemical, and physiological properties of one such strain, Che 82, isolated from sample C-29 of 3.4-3.5 Ma-old sedimentary rocks taken at a drilling depth of 146.74 m. As a result of our investigations, strain Che 82 is described as a new bacterial species, Roseomonas baikalica sp. nov., belonging to the genus Roseomonas within the family Methylobacteriaceae, class Alphaproteobacteria.

  19. The effect of sediment mimicking drill cuttings on deep water rhodoliths in a flow-through system: Experimental work and modeling.

    Science.gov (United States)

    Figueiredo, Marcia A O; Eide, Ingvar; Reynier, Marcia; Villas-Bôas, Alexandre B; Tâmega, Frederico T S; Ferreira, Carlos Gustavo; Nilssen, Ingunn; Coutinho, Ricardo; Johnsen, Ståle

    2015-06-15

    The impact of sediment coverage on two rhodolith-forming calcareous algae species collected at 100m water depth off the coast of Brazil was studied in an experimental flow-through system. Natural sediment mimicking drill cuttings with respect to size distribution was used. Sediment coverage and photosynthetic efficiency (maximum quantum yield of charge separation in photosystem II, ϕPSIImax) were measured as functions of light intensity, flow rate and added amount of sediment once a week for nine weeks. Statistical experimental design and multivariate data analysis provided statistically significant regression models which subsequently were used to establish exposure-response relationship for photosynthetic efficiency as function of sediment coverage. For example, at 70% sediment coverage the photosynthetic efficiency was reduced 50% after 1-2weeks of exposure, most likely due to reduced gas exchange. The exposure-response relationship can be used to establish threshold levels and impact categories for environmental monitoring.

  20. Hyperspectral Alteration Information from Drill Cores and Deep Uranium Exploration in the Baiyanghe Uranium Deposit in the Xuemisitan Area, Xinjiang, China

    Directory of Open Access Journals (Sweden)

    Qing-Jun Xu

    2017-05-01

    Full Text Available The Baiyanghe uranium deposit is a currently important medium-sized deposit in the Xuemisitan area, Xinjiang. The hydrothermal alteration in this deposit is closely related to the uranium mineralization of the deposit. In this study, hyperspectral data are collected from drill cores in the Baiyanghe uranium deposit using a FieldSpec4 visible-shortwave infrared spectrometer to study the hydrothermal alteration. The results reveal that the altered mineral assemblages have obvious zonation characteristics: (1 the upper section comprises long-wavelength illite and minor hematite and montmorillonite; (2 the middle section contains three types of illite (long-, medium- and short-wavelength illite and hematite; and (3 the lower section includes short-wavelength illite, chlorite and carbonate. Additionally, the variety in the characteristic absorption-peak wavelength of illite at 2200 nm gradually shifts to shorter wavelength and ranges between 2195 nm and 2220 nm with increasing depth, while the SWIR-IC (short-wavelength infrared illite crystallinity, a dimensionless quantity of the drill holes gradually increases from 0.2 to 2.1. These patterns reflect the hydrothermal fluid activity in the deposit, which features relatively high-temperature, high-pressure hydrothermal fluid in the deeper section and low-temperature, low-pressure hydrothermal fluid in the shallower section. Additionally, the uranium mineralization is located near the fracture zone, which represents the center of hydrothermal fluid activity or mineralization. This area has abundant alteration minerals, and the minerals illite (short- and medium-wavelength, hematite and fluorite can be used as uranium-prospecting indicators for uranium exploration in the deeper sections of the Baiyanghe uranium deposit.

  1. The Monitoring System Based on Cutting Power and Hydraulic Signals in Deep-hole Drilling%基于切削功率与油压信号的深孔钻削监测系统

    Institute of Scientific and Technical Information of China (English)

    王玮

    2011-01-01

    针对深孔加工系统实时监测困难和可靠性较差的特点,本文应用多传感器综合检测技术,分别采集深孔钻削过程中的切削功率与油压信号,并将两路信号融合起来输入系统进行分析,建立多参数融合的监测系统,由对信号的综合分析得出检测结果.%For the difficulties of real-time monitoring and poor reliability of deep-hole machining system, in this paper, an integrated multi-sensor detection technology is used to analyze the cutting power and hydraulic signals in the process of acquisition of deep-hole drilling and the input system with the integration of the two signals, and multi-parameter integration monitoring systems is established, in the end the monitoring results are got from comprehensive analysis of signals.

  2. Drilling equipment

    Energy Technology Data Exchange (ETDEWEB)

    Voyevodin, Yu.M.; Kholosha, Ye.G.; Leshchenko, A.G.; Timchenko, A.I.

    1979-01-10

    The invention refers to units designed for extracting minerals by mechanical action on the face by a cutting tool. There is a known drills which includes a pulse device which contains a combustion chamber, cylinder, piston-percussion tool and cutting tool. The combustion chamber and the sub-piston cavity of the cylinder are connected by a channel in which there is a distributor. Its shortcoming is the fact that the pulse device does not guarantee the necessary motion of the actuating mechanism for its velocity and frequency of the shocks on the cutting tool. This reduces the efficiency of the operation and limits the area of application. The purpose of the proposed invention is to improve productivity of the device. This is achieved because the head of the drill is equipped with a 2-piston pulse device which contains 2-combustion chambers, 2 working cylinders, 2 piston percussion instruments, a rod with gas-conducting and connecting channels for interconnection of the sub-piston cavities and combustion chambers of both cylinders. The spent gases of one cylinder are used for closing the combustion chamber of the second cylinder.

  3. 瓦斯抽放煤层增透深孔聚能爆破钻孔参数%Drilling parameters of deep-hole cumulative blasting to improve coal seam permeability in gas drainage

    Institute of Scientific and Technical Information of China (English)

    郭德勇; 吕鹏飞; 单智勇; 谢安

    2013-01-01

    以焦作煤业集团九里山矿煤层深孔聚能爆破试验为基础,利用数值模拟分析了爆破煤体应力变化规律,发现聚能爆破效应导致应力峰值增大,扩大了煤体裂隙区范围.同时对聚能爆破钻孔参数进行优化,确定了合理的炮孔直径、爆破孔间距、爆破孔与邻近抽放孔及煤层顶底板间距.现场试验结果表明:优化的钻孔参数不仅使聚能爆破增透效果显著而且保证了爆破过程的安全.%Based on coal seam deep-hole cumulative blasting experiments in Jiulishan Coal Mine of Jiaozuo Coal Group, the law of stress change in a blasting coal body was analyzed by numerical simulation. It is found that cumulative blasting effect leads to the increase of peak stress and enlarges the crack zone range of the coal body. Drilling parameters for cumulative blasting, such as blast hole diameter, blast hole spacing, distance between the blast hole and the adjacent gas drainage hole, and distance from the blast hole to the coal seam roof and floor, were determined by optimization. Field experimental results show that after using these optimized drilling parameters the cumulative blasting not only gets remarkable permeability increasing effect but also ensures blasting safety.

  4. New Era of Scientific Ocean Drilling

    Science.gov (United States)

    Eguchi, N.; Toczko, S.; Sanada, Y.; Igarashi, C.; Kubo, Y.; Maeda, L.; Sawada, I.; Takase, K.; Kyo, N.

    2014-12-01

    The D/V Chikyu, committed to scientific ocean drilling since 2007, has completed thirteen IODP expeditions, and Chikyu's enhanced drilling technology gives us the means to reach deep targets, enhanced well logging, deep water riserless drilling, and state of the art laboratory. Chikyu recovered core samples from 2466 meters below sea floor (mbsf) in IODP Exp. 337, and drilled to 3058.5 mbsf in IODP Exp. 348, but these are still not the limit of Chikyu's capability. As deep as these depths are, they are just halfway to the 5200 mbsf plate boundary target for the NanTroSEIZE deep riser borehole. There are several active IODP proposals in the pipeline. Each has scientific targets requiring several thousand meters of penetration below the sea floor. Riser technology is the only way to collect samples and data from that depth. Well logging has been enhanced with the adoption of riser drilling, especially for logging-while-drilling (LWD). LWD has several advantages over wireline logging, and provides more opportunities for continuous measurements even in unstable boreholes. Because of the larger diameter of riser pipes and enhanced borehole stability, Chikyu can use several state-of-the-art downhole tools, e.g. fracture tester, fluid sampling tool, wider borehole imaging, and the latest sonic tools. These new technologies and tools can potentially expand the envelope of scientific ocean drilling. Chikyu gives us access to ultra-deep water riserless drilling. IODP Exp. 343/343T investigating the March 2011 Tohoku Oki Earthquake, explored the toe of the landward slope of the Japan Trench. This expedition reached the plate boundary fault target at more than 800 mbsf in water depths over 6900 m for logging-while-drilling, coring, and observatory installation. This deep-water drilling capability also expands the scientific ocean drilling envelope and provides access to previously unreachable targets. On top of these operational capabilities, Chikyu's onboard laboratory is

  5. Technology strategy for cost-effective drilling and intervention; Technology Target Areas; TTA4 - Cost effective drilling and intervention

    Energy Technology Data Exchange (ETDEWEB)

    2007-07-01

    The main goals of the OG21 initiative are to (1) develop new technology and knowledge to increase the value creation of Norwegian oil and gas resources and (2) enhance the export of Norwegian oil and gas technology. The OG21 Cost-effective Drilling and Intervention (CEDI) Technology Target Area (TTA) has identified some key strategic drilling and well intervention needs to help meet the goals of OG21. These key strategic drilling and well intervention needs are based on a review of present and anticipated future offshore-Norway drilling and well intervention conditions and the Norwegian drilling and well intervention industry. A gap analysis has been performed to assess the extent to which current drilling and well intervention research and development and other activities will meet the key strategic needs. Based on the identified strategic drilling and well intervention needs and the current industry res each and development and other activities, the most important technology areas for meeting the OG21 goals are: environment-friendly and low-cost exploration wells; low-cost methods for well intervention/sidetracks; faster and extended-reach drilling; deep water drilling, completion and intervention; offshore automated drilling; subsea and sub-ice drilling; drilling through basalt and tight carbonates; drilling and completion in salt formation. More specific goals for each area: reduce cost of exploration wells by 50%; reduce cost for well intervention/sidetracks by 50%; increase drilling efficiency by 40%; reduce drilling cost in deep water by 40 %; enable offshore automated drilling before 2012; enable automated drilling from seabed in 2020. Particular focus should be placed on developing new technology for low-cost exploration wells to stem the downward trends in the number of exploration wells drilled and the volume of discovered resources. The CEDI TTA has the following additional recommendations: The perceived gaps in addressing the key strategic drilling and

  6. 前馈PID控制器在钻柱运动补偿系统中的应用%Application of feedforward PID control in deep-sea drill string motion compensation system

    Institute of Scientific and Technical Information of China (English)

    张文凡; 廖辉

    2012-01-01

    Aiming at the problem that load of drill string motion compensation system is very heavy in deep-sea, which will take a long response time of system, and the process of compensation movement occurred delaying and oscillating, the feedward PID controller of drill string motion compensation system was put forward, on the basis of the forecast output of the trend of load, a feed forward compensation control method was used to reduce the effects of the changement of the load, improve the respons time of system. Meanwhile, a PID feed back control method was used to reduce the errors which caused by others reason, improve the control accuration of the system. The research results show that this method has some guidance and practical value to the design of controller of high inertia loads of motion compensation device in deep-sea.%针对“深海钻柱运动补偿系统负载大时,钻柱运动补偿系统响应的时间长,使得补偿系统在控制过程中出现滞后、反馈补偿出现振荡”等问题,设计了钻柱运动补偿系统中的前馈PID控制器.根据对负载变化趋势的预测结果,采取前馈补偿的方法来减小补偿系统负载变化对钻压产生的影响,提高了系统的响应速度;同时,引入PID反馈控制消除补偿系统在前馈控制过程中产生的误差,提高了系统跟踪补偿的精度.研究结果表明,该方法对于大惯性负载的运动补偿装置控制器的设计具有一定的借鉴意义和实用价值.

  7. Optimizing drilling performance using a selected drilling fluid

    Science.gov (United States)

    Judzis, Arnis [Salt Lake City, UT; Black, Alan D [Coral Springs, FL; Green, Sidney J [Salt Lake City, UT; Robertson, Homer A [West Jordan, UT; Bland, Ronald G [Houston, TX; Curry, David Alexander [The Woodlands, TX; Ledgerwood, III, Leroy W.

    2011-04-19

    To improve drilling performance, a drilling fluid is selected based on one or more criteria and to have at least one target characteristic. Drilling equipment is used to drill a wellbore, and the selected drilling fluid is provided into the wellbore during drilling with the drilling equipment. The at least one target characteristic of the drilling fluid includes an ability of the drilling fluid to penetrate into formation cuttings during drilling to weaken the formation cuttings.

  8. Just-in-time online professional development activities for an innovation in small rural schools / Activités de perfectionnement professionnel « juste-à-temps » pour l’innovation dans les petites écoles rurales

    Directory of Open Access Journals (Sweden)

    Christine Hamel

    2012-08-01

    Full Text Available This article describes the just-in-time online professional development offered to teachers in the Remote Networked Schools (RNS, a systemic initiative funded by the Quebec Ministry of Education (Canada, which aims at enriching the learning environment of small rural schools with the use of information and communication technologies (ICTs. The designed experiment method studies the activity identified and the categories of professional development offered by a university-based intervention team (UBIT over six years of deployment. Cet article décrit le développement professionnel en ligne « juste-à-temps » proposé aux enseignants dans les Écoles Eloignées en Réseau (ÉÉR, une initiative systémique financée par le ministère de l'Éducation du Québec (Canada, et visant à enrichir l'environnement d'apprentissage des petites écoles rurales par l'utilisation des technologies de l'information et de la communication (TIC. La méthode des plans d’expériences étudie l'activité identifiée et les types de développement professionnel offerts par une équipe d'intervention en milieu universitaire pendant six années de développement.

  9. Considerações acerca do planejamento e controle da produção por meio do sistema just in time aplicado ao segmento de embalagens de madeira

    Directory of Open Access Journals (Sweden)

    Daniel Eleti

    2014-10-01

    Full Text Available Cada vez mais as empresas se deparam com um mercado competitivo, onde têm que se adaptar rapidamente para conseguir atender suas demandas. O PCP é um dos setores mais importantes de uma empresa e que tem um papel fundamental para alcançar tal objetivo. Com base nesse fato, este artigo mostra as diversas funções exercidas pelo setor conhecido como Planejamento e Controle da Produção (PCP, o sistema produtivo Just in Time (JIT e suas principais barreiras de implantação. Foram feitas também análises de como elaborar o planejamento da produção em todas as suas etapas e as possibilidades de programação, com especial enfoque na produção puxada e na dinâmica de controle da produção. O artigo em questão mostra também a atuação do PCP na produção de embalagens de madeira para exportação da empresa estudada por meio de um estudo de caso.

  10. As relações entre estratégia de produção, TQM (Total Quality Management ou Gestão da Qualidade Total e JIT (Just-In-Time: estudos de caso em uma empresa do setor automobilístico e em dois de seus fornecedores The relationships between production strategy, TQM (Total Quality Management and JIT (Just-In-Time: a case study in a automobile company and in two of its suppliers

    Directory of Open Access Journals (Sweden)

    Aline Lamon Cerra

    2000-12-01

    Full Text Available Este artigo tem como objetivo discutir as relações existentes entre as Estratégias de Produção e os programas TQM (Total Quality Management ou Gestão da Qualidade Total e JIT (Just-In-Time, destacando a importância da integração destes programas às Estratégias de Produção nas empresas. O estudo desta integração demonstrou que os programas TQM e JIT, embora possam trabalhar separadamente, são complementares e devem estar alinhados com as Estratégias de Produção a fim de promover melhorias na função produção. Além disso, será verificado de que modo a empresa automobilística condiciona a difusão das estratégias e programas adotados em sua cadeia de fornecedores. Serão apresentados os conceitos básicos e questões teóricas relacionados à Estratégia de Produção, ao TQM e ao JIT, e um estudo de caso nas três empresas.This paper has the objective to discuss the existent relationships between the Manufacturing Strategy and the programs TQM - Total Quality Management and JIT - Just-In-Time, highlighting the importance of the integration between the production strategy and the other strategies of the company. Besides, the relationships will be discussed among TQM and JIT, programs that came up with the objective of promoting In the function production; the study demonstrated that those programs, although they can work separately, are complemental and should be aligned with the production strategy. Then, we will present the basic concepts and theoretical subjects related to the Production Strategy, to TQM and JIT, and a case study in a automobile company and two of its suppliers. The three companies are multinational and placed inside São Paulo. Thus, in the automobile company we will also verify the conditions of diffusion of its strategies and its programs in its supply chain.

  11. Follow the drill

    Energy Technology Data Exchange (ETDEWEB)

    Fitch-Roy, O. [Dando Drilling International (United Kingdom)

    2005-08-01

    The paper discusses modern drilling techniques with which Dando Drilling has been involved. It describes equipment supplied to opencast coal operations in Kalimantan, Borneo. These include polycrystalline diamond drill bits, flushing media, rig drilling controls and other specialised equipment. 3 photos.

  12. 地质超深钻孔自寻北陀螺测斜仪研制%Development of the Automatic North-finding Gyroscope Inclinometer for Super-deep Geological Drilling

    Institute of Scientific and Technical Information of China (English)

    周策; 王瑜; 刘一民; 陈文俊

    2014-01-01

    This text elaborates the technique problems of automatic north-finding gyroscope survey for super-deep geological drilling in the condition of high temperature of 280℃and depth of 8000m.New low power and high temperature resistance electric components, integrate circuits and heat insulation material are adopted; and the techniques of high temperature welding, sealing, high temperature resistance and automatic north-finding gyroscopic survey are used to develop the bore-hole inclinometer which can not only ensure the quality and safety of the borehole in high temperature and high pressure en-vironment and search out the related technologies for inclination survey.%阐述了解决在高达280℃高温、孔深8000 m环境的地质超深钻孔自寻北陀螺测斜的技术问题。采用新型低功耗耐高温电子元件集成电路、隔热保温材料,利用高温焊接技术、密封技术、隔热保温技术及自寻北陀螺测斜技术,研制在高温、高压钻孔环境中既能保证质量又能保证安全的钻孔测斜仪以及研究相应的测斜工艺技术方法。

  13. 自钻式锚杆在深基坑支护中的应用%Technical Study on Application of Self-drilling Bolts in Deep Foundation Excavation Support

    Institute of Scientific and Technical Information of China (English)

    戚瑞安

    2014-01-01

    桩锚支护是近年来新兴的深基坑支护方式,但常规锚杆在饱和软土地区施工中效果不佳。结合胜利油田中心医院综合病房楼基坑支护工程,提出一种适合特殊地质特点的自钻式锚杆施工技术,研究了其施工工艺、操作要点,探讨了监测方式,该工艺实施效果显著,技术先进可行,在多项工程中获得推广应用。%Pile-anchor support is a rising deep excavation support pattern in recent years, but the conventional pile-anchor does not work well in the areas of saturated soft soil. Illustrated by foundation excavation supports of comprehensive inpatient building of Central Hospital of Shengli Oilfield, this paper puts forward a new construction technique of applying self-drilling bolts in special geologic condition with a study on its technology and operating instructions and a further discussion on testing method. This technique is advance, effective and practical and has been applied and promoted in many projects.

  14. CASING DRILLING TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Nediljka Gaurina-Međimurec

    2005-12-01

    Full Text Available Casing drilling is an alternative option to conventional drilling and uses standard oilfield casing instead of drillstring. This technology is one of the greatest developments in drilling operations. Casing drilling involves drilling and casing a well simultaneously. In casing driling process, downhole tools can be retrieved, through the casing on wire-line, meaning tool recovery or replacement of tools can take minutes versus hours under conventional methods. This process employs wireline-retrievable tools and a drill-lock assembly, permitting bit and BHA changes, coring, electrical logging and even directional or horizontal drilling. Once the casing point is reached, the casing is cemented in place without tripping pipe.

  15. Facies And Bedding Analysis of Deep-Marine, Arc-Related, Sediementary Rocks Cored on International Ocean Drilling Program Expedition 351.

    Science.gov (United States)

    Johnson, K. E.; Marsaglia, K. M.

    2015-12-01

    The Izu-Bonin-Mariana (IBM) Arc System, south of Japan, hosts a multitude of active and extinct (remnant) arc volcanic sediment sources. Core extracted adjacent to the proto-IBM arc (Kyushu-Palau Ridge; KPR) in the Amami-Sankaku Basin on International Ocean Discovery Program (IODP) Expedition 351 contains evidence of the variety of sediment sources that have existed in the area as a result of changing tectonic regimes through arc development, backarc basin formation and remnant arc abandonment. Approximately 1000 meters of Eocene to Oligocene volcaniclastic sedimentary rocks were analyzed via shipboard core photos, core descriptions, and thin sections with the intention of understanding the depositional history at this site. These materials contain a crucial record of arc development complementary to the Neogene history preserved in the active reararc (Expedition 350) and compressed whole-arc record in the current forearc (Expedition 352). A database of stratigraphic columns was created to display grain size trends, facies changes, and bedding characteristics. Individual beds (depositional events) were classified using existing and slightly modified classification schemes for muddy, sandy and gravel-rich gravity flow deposits, as well as muddy debris flows and tuffs. Utilizing the deep marine facies classes presented by Pickering et al. (1986), up section changes are apparent. Through time, as the arc developed, facies and bedding types and their proportions change dramatically and relatively abruptly. Following arc initiation facies are primarily mud-rich with intercalated tuffaceous sand. In younger intervals, sand to gravel gravity-flow deposits dominate, becoming more mud-rich. Muddy gravity flow deposits, however, dominate farther upsection. The overall coarsening-upward pattern (Unit III) is consistent with building of the arc edifice. Farther upsection (Unit II) an abrupt fining-upward trend represents the onset of isolation of the KPR as backarc spreading

  16. The possible bearing of the granite of the UPH Deep Drill Holes, northern Illinois, on the origin of Mississippi Valley ore deposits

    Science.gov (United States)

    Doe, B. R.; Stuckless, J. S.; Delevaux, M. H.

    1983-09-01

    The Pb-Pb, Th-Pb, and U-Pb systems of whole-rock drill-core samples of the granite of UPH record at least one postcrystallization event. Treatment of the data on a concordia plot indicate the timing of this disturbance was probably 260 ±35 m.y. ago and probably no older than 400 m.y. ago. The upper intercept age on concordia is 1416±20 m.y and the Pb-Pb isochron age for the four least disturbed rocks plus the four potassium feldspars is 1451±19 m.y. These ages are in close agreement with Rb-Sr whole rock and U-Pb zircon ages determined by others and should be the age of granite formation. Considerable Pb loss is indicated for many of the shallower samples that have a more red rather than pink color, probably to a factor of two to three or more as a result of the disturbance, although the granite remains Pb-rich today (40-80 ppm). In some other studies of disturbed U-Th-Pb systems, the radiogenic lead has been taken up by potassium feldspars; however, the Pb for most samples seems to have been lost from the system for the granite of UPH. One sample with an unusually high Pb content of about 195 ppm has the most radiogenic Pb of any sample but `normal' values of Th-U. This sample has obviously gained radiogenic Pb (by more than a factor of four) and confirms that Pb was indeed mobilized in parts of the system. Within the limits of the uncertainties, equal amounts of Pb were lost or gained in both the U-Pb and Th-Pb systems, which is compatible with mobilization being restricted to lead. There is some tendency, however, for the more affected samples to have lower Th-U values and higher U contents. A complex model in which U is gained, Pb lost, and 208Pb lost preferentially to 207Pb and 206Pb cannot be ruled out. U and Th have somewhat different crystallographic locations and decay energies so that 208Pb might be in more accessible sites than the other Pb isotopes. Fission track mapping of the samples indicates most of the U today is located in submicroscopic sites

  17. Advances in developing the air-lift drilling technology. Concept of a portal drilling rig - trial of a steerable shaft drilling bit

    Energy Technology Data Exchange (ETDEWEB)

    Weber, W.

    1988-12-01

    The Federal Minister of Research and Technology is supporting a project of Wirth GmbH to develop a new drilling rig suitable for drilling deep shafts from the surface through ground of almost any condition, from unstable formations to solid rock. The development of such drilling rig is based on the blind drilling method with air-assisted reverse circulation. - Various concepts of drilling rigs have been developed in accordance with different planning stages of a combined RD-project. Based on the experience of an extensive R and D program a steerable vertical drilling bit has been developed by which deviations from the vertical can be positively corrected. The prototype of this steerable bit with a diameter of 2.1 m has been tested successfully while drilling a well with a depth of more than 200 m in an open pit coal mine.

  18. CASING DRILLING TECHNOLOGY

    OpenAIRE

    Nediljka Gaurina-Međimurec

    2005-01-01

    Casing drilling is an alternative option to conventional drilling and uses standard oilfield casing instead of drillstring. This technology is one of the greatest developments in drilling operations. Casing drilling involves drilling and casing a well simultaneously. In casing driling process, downhole tools can be retrieved, through the casing on wire-line, meaning tool recovery or replacement of tools can take minutes versus hours under conventional methods. This process employs wireline-re...

  19. Paleoclimatic implications of magnetic susceptibility in Late Pliocene-Quaternary sediments from deep drilling core SG-1 in the western Qaidam Basin (NE Tibetan Plateau)

    Science.gov (United States)

    Zhang, Weilin; Appel, Erwin; Fang, Xiaomin; Yan, Maodu; Song, Chunhui; Cao, Liwan

    2012-06-01

    Lake sediments are important archives of paleoclimate change and erosion history. A 938.5 m long core (SG-1) of lacustrine sediments, dated at 2.77 Ma to 0.1 Ma, was obtained from the western Qaidam Basin in the northeastern Tibetan Plateau, consisting of dark grayish mudstone and grayish siltstone, intercalated with salts and fine sandstones in the upper part. Magnetic susceptibility data, combined with detailed rock magnetic properties, were analyzed for revealing the significance of ferro(i)magnetic concentration for past changes of climate and erosion. Mass-specific susceptibility (χ) shows a striking cyclic and long-term variation. Samples with high χ values are dominated by magnetite and maghemite with pseudo-single-domain properties. In contrast, samples with low χ values contain maghemite from single-domain to multidomain and, additionally, a significant fraction of hematite. The driving mechanism of χ variation can be explained by three alternative models: (1) different source regions with alternations of wind and cryoclastic erosion in a wider hinterland (dry-cold climate) and surface runoff erosion from a narrower area (more humid climate) and (2 and 3) low-temperature oxidation, occurring either in the lake sediments (dry climate) or in the catchment area during weathering (more humid climate). Trends of χ match with changes in sedimention rates and are roughly synchronous with the deep-sea δ18O record on a glacial-interglacial timescale. Therefore, the concentration of magnetic minerals in the western Qaidam Basin sediments is likely controlled by both tectonic influence and paleoenvironmental changes but can be best interpreted by alternations and trends of dry-cold and more humid periods due to Asian drying and global cooling.

  20. Refrigerator doors just-in-time; Kuehlschrank-Tueren just-in-time

    Energy Technology Data Exchange (ETDEWEB)

    Salinas, F.R.

    1994-12-31

    Flexibility today is not only demanded with respect to any given different component types, but also for future model modifications and consecutive productions. Even the smallest batch sizes must be produced economically. These requirements are also made as to stamped product technology. (orig.) [Deutsch] Flexibilitaet wird heute nicht nur hinsichtlich vorgegebener unterschiedlicher Werkstueck-Typen gefordert, sondern auch fuer kuenftige Modellergaenzungen und nachfolgende Fertigungen. Dazu sollen moeglichst kleinste Losgroessen wirtschaftlich sein. Diese Forderungen werden auch an die Stanzereitechnik gestellt. (orig.)

  1. Robotic Planetary Drill Tests

    Science.gov (United States)

    Glass, Brian J.; Thompson, S.; Paulsen, G.

    2010-01-01

    Several proposed or planned planetary science missions to Mars and other Solar System bodies over the next decade require subsurface access by drilling. This paper discusses the problems of remote robotic drilling, an automation and control architecture based loosely on observed human behaviors in drilling on Earth, and an overview of robotic drilling field test results using this architecture since 2005. Both rotary-drag and rotary-percussive drills are targeted. A hybrid diagnostic approach incorporates heuristics, model-based reasoning and vibration monitoring with neural nets. Ongoing work leads to flight-ready drilling software.

  2. Introduction to drilling technology

    Science.gov (United States)

    Mellor, Malcom

    1989-12-01

    Terrestrial drilling technology is reviewed. The general requirements for a drilling system are given and conventional drilling techniques (rotary drag-bit, rotary roller-bit, percussive, rotary percussive) are described. Unconventional techniques for penetrating solids are outlined, including thermal drilling (spalling or melting), projectile penetration, high pressure liquid jets, explosive jets, erosion by projectile streams, and chemical penetration. Special attention is given to drilling in ice and frozen soils, performance data are given, including values for penetration rate and specific energy consumption. The principles, theory and equipment relating to each drilling technique are indicated by means of diagrams.

  3. 30 CFR 203.30 - Which leases are eligible for royalty relief as a result of drilling a phase 2 or phase 3 ultra...

    Science.gov (United States)

    2010-07-01

    ... ROYALTY RATES OCS Oil, Gas, and Sulfur General Royalty Relief for Drilling Ultra-Deep Wells on Leases Not... a result of drilling a phase 2 or phase 3 ultra-deep well? 203.30 Section 203.30 Mineral Resources... drilling a phase 2 or phase 3 ultra-deep well? Your lease may receive a royalty suspension volume...

  4. 绳索取心钻进工艺在佳县上高寨普查勘探区深孔中的应用%Application of Wire-line Core Drilling Technology in Shanggaozhai Prospecting Area Deep Boreholes, Jiaxian County

    Institute of Scientific and Technical Information of China (English)

    王眼会; 程湖渊

    2015-01-01

    Upper part strata in the Shanggaozhai prospecting area have Quaternary accumulated loess, bedrock mainly yellowish brown Luohe sandstone and grayish white argillaceous sandstone, grayish brown mudstone. Rock hardness is relatively small, fractures and fragmentation status rather serious, thus caused drilling operation difficult. Based on summarization of problems appeared in common core drilling, introduced wire-line core drilling technological peculiarity and application details. The result has shown that the wire-line core drilling technology can increase penetrating time, lower down labor intensity, improve drilling quality, rock and coal core re⁃covery, and reduce the cost. Finally, after estimation, the common drilling technology unit cost is 520.23 RMB Yuan/m, while wire-line core drilling is 310.16 RMB Yuan/m, have reduced 40%. Thus the technology has guiding significance in popularization of wire-line core drilling in coalfield deep borehole drilling.%佳县上高寨普查勘探区上部为第四系黄土堆积而成,基岩主要是由黄褐色洛河砂岩以及灰白色泥质砂岩、灰褐色泥岩等构成,岩石硬度比较小,裂隙、破碎情况比较突出,导致钻探施工难度较大。在总结用普通取心钻进时出现的问题基础上,介绍了绳索取心钻进的钻进工艺技术的特点和应用细节。结果表明,采用绳索取心钻进工艺技术,增大了纯钻进时间,降低劳动强度,提高钻进质量和岩、煤心采取率,降低了钻探成本。最后经过测算普通钻进工艺的单位成本为520.53元/m,绳索取心钻进工艺的单位成本为310.16元/m,单位成本降低了40%。对普及绳索取心钻探工艺在煤田中深孔钻进勘探具有重要的指导意义。

  5. Permeability and seismic velocity and their anisotropy across the Alpine Fault, New Zealand: An insight from laboratory measurements on core from the Deep Fault Drilling Project phase 1 (DFDP-1)

    Science.gov (United States)

    Allen, M. J.; Tatham, D.; Faulkner, D. R.; Mariani, E.; Boulton, C.

    2017-08-01

    The Alpine Fault, a transpressional plate boundary between the Australian and Pacific plates, is known to rupture quasiperiodically with large magnitude earthquakes (Mw 8). The hydraulic and elastic properties of fault zones are thought to vary over the seismic cycle, influencing the nature and style of earthquake rupture and associated processes. We present a suite of laboratory permeability and P (Vp) and S (Vs) wave velocity measurements performed on fault lithologies recovered during the first phase of the Deep Fault Drilling Project (DFDP-1), which sampled principal slip zone (PSZ) gouges, cataclasites, and fractured ultramylonites, with all recovered lithologies overprinted by abundant secondary mineralization, recording enhanced fluid-rock interaction. Core material was tested in three orthogonal directions, orientated relative to the down-core axis and, when present, foliation. Measurements were conducted with pore pressure (H2O) held at 5 MPa over an effective pressure (Peff) range of 5-105 MPa. Permeabilities and seismic velocities decrease with proximity to the PSZ with permeabilities ranging from 10-17 to 10-21 m2 and Vp and Vs ranging from 4400 to 5900 m/s in the ultramylonites/cataclasites and 3900 to 4200 m/s at the PSZ. In comparison with intact country rock protoliths, the highly variable cataclastic structures and secondary phyllosilicates and carbonates have resulted in an overall reduction in permeability and seismic wave velocity, as well as a reduction in anisotropy within the fault core. These results concur with other similar studies on other mature, tectonic faults in their interseismic period.

  6. Development and Application of Insulated Drill Pipe for High Temperature, High Pressure Drilling

    Energy Technology Data Exchange (ETDEWEB)

    Tom Champness; Tony Worthen; John Finger

    2008-12-31

    This project aimed to extend the insulated drill pipe (IDP) technology already demonstrated for geothermal drilling to HTHP drilling in deep gas reservoirs where temperatures are high enough to pose a threat to downhole equipment such as motors and electronics. The major components of the project were: a preliminary design; a market survey to assess industry needs and performance criteria; mechanical testing to verify strength and durability of IDP; and development of an inspection plan that would quantify the ability of various inspection techniques to detect flaws in assembled IDP. This report is a detailed description of those activities.

  7. Joint Rescue Drill

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Ships gather for a joint rescue drill at the Waigaoqiao Dock in Shanghai on August 24.A large-scale rescue drill, combining maritime and air forces,was held as part of the ongoing World Maritime Rescue Conference 2011 in the city.During the drill,

  8. Facility for testing ice drills

    Science.gov (United States)

    Nielson, Dennis L.; Delahunty, Chris; Goodge, John W.; Severinghaus, Jeffery P.

    2017-05-01

    The Rapid Access Ice Drill (RAID) is designed for subsurface scientific investigations in Antarctica. Its objectives are to drill rapidly through ice, to core samples of the transition zone and bedrock, and to leave behind a borehole observatory. These objectives required the engineering and fabrication of an entirely new drilling system that included a modified mining-style coring rig, a unique fluid circulation system, a rod skid, a power unit, and a workshop with areas for the storage of supplies and consumables. An important milestone in fabrication of the RAID was the construction of a North American Test (NAT) facility where we were able to test drilling and fluid processing functions in an environment that is as close as possible to that expected in Antarctica. Our criteria for site selection was that the area should be cold during the winter months, be located in an area of low heat flow, and be at relatively high elevation. We selected a site for the facility near Bear Lake, Utah, USA. The general design of the NAT well (NAT-1) started with a 27.3 cm (10.75 in.) outer casing cemented in a 152 m deep hole. Within that casing, we hung a 14 cm (5.5 in.) casing string, and, within that casing, a column of ice was formed. The annulus between the 14 and 27.3 cm casings provided the path for circulation of a refrigerant. After in-depth study, we chose to use liquid CO2 to cool the hole. In order to minimize the likelihood of the casing splitting due to the volume increase associated with freezing water, the hole was first cooled and then ice was formed in increments from the bottom upward. First, ice cubes were placed in the inner liner and then water was added. Using this method, a column of ice was incrementally prepared for drilling tests. The drilling tests successfully demonstrated the functioning of the RAID system. Reproducing such a facility for testing of other ice drilling systems could be advantageous to other research programs in the future.

  9. The first microbiological contamination assessment by deep-sea drilling and coring by the D/V Chikyu at the Iheya North hydrothermal field in the Mid-Okinawa Trough (IODP Expedition 331

    Directory of Open Access Journals (Sweden)

    Katsunori eYanagawa

    2013-11-01

    Full Text Available During the Integrated Ocean Drilling Program (IODP Expedition 331 at the Iheya North hydrothermal system in the Mid-Okinawa Trough by the D/V Chikyu, we conducted microbiological contamination tests of the drilling and coring operations. The contamination from the drilling mud fluids was assessed using both perfluorocarbon tracers (PFT and fluorescent microsphere beads. PFT infiltration was detected from the periphery of almost all whole round cores. By contrast, fluorescent microspheres were not detected in hydrothermally active core samples, possibly due to thermal decomposition of the microspheres under high-temperature conditions. Microbial contamination from drilling mud fluids to the core interior subsamples was further characterized by molecular-based evaluation. The microbial 16S rRNA gene phylotype compositions in the drilling mud fluids were mainly composed of sequences of Beta- and Gammaproteobacteria, and Bacteroidetes and not archaeal sequences. The phylotypes that displayed more than 97% similarity to the sequences obtained from the drilling mud fluids were defined as possible contaminants in this study and were detected as minor components of the bacterial phylotype compositions in 13 of 37 core samples. The degree of microbiological contamination was consistent with that determined by the PFT and/or microsphere assessments. This study suggests a constructive approach for evaluation and eliminating microbial contamination during riser-less drilling and coring operations by the D/V Chikyu.

  10. The first microbiological contamination assessment by deep-sea drilling and coring by the D/V Chikyu at the Iheya North hydrothermal field in the Mid-Okinawa Trough (IODP Expedition 331).

    Science.gov (United States)

    Yanagawa, Katsunori; Nunoura, Takuro; McAllister, Sean M; Hirai, Miho; Breuker, Anja; Brandt, Leah; House, Christopher H; Moyer, Craig L; Birrien, Jean-Louis; Aoike, Kan; Sunamura, Michinari; Urabe, Tetsuro; Mottl, Michael J; Takai, Ken

    2013-01-01

    During the Integrated Ocean Drilling Program (IODP) Expedition 331 at the Iheya North hydrothermal system in the Mid-Okinawa Trough by the D/V Chikyu, we conducted microbiological contamination tests of the drilling and coring operations. The contamination from the drilling mud fluids was assessed using both perfluorocarbon tracers (PFT) and fluorescent microsphere beads. PFT infiltration was detected from the periphery of almost all whole round cores (WRCs). By contrast, fluorescent microspheres were not detected in hydrothermally active core samples, possibly due to thermal decomposition of the microspheres under high-temperature conditions. Microbial contamination from drilling mud fluids to the core interior subsamples was further characterized by molecular-based evaluation. The microbial 16S rRNA gene phylotype compositions in the drilling mud fluids were mainly composed of sequences of Beta- and Gammaproteobacteria, and Bacteroidetes and not archaeal sequences. The phylotypes that displayed more than 97% similarity to the sequences obtained from the drilling mud fluids were defined as possible contaminants in this study and were detected as minor components of the bacterial phylotype compositions in 13 of 37 core samples. The degree of microbiological contamination was consistent with that determined by the PFT and/or microsphere assessments. This study suggests a constructive approach for evaluation and eliminating microbial contamination during riser-less drilling and coring operations by the D/V Chikyu.

  11. Thermal Analysis and Design of Online Detecting and Controlling System for Deep-hole Drill Temperature%内排屑深孔钻头热分析与深孔钻头温度的在线检测控制系统设计

    Institute of Scientific and Technical Information of China (English)

    黄健; 陈忠仁; 徐平凡

    2014-01-01

    Thermal analysis of dry deep-hole drill was done by using ANSYS software,according to the thermal deformation problem existed in deep-hole dill system. According to the conclusion from thermal analysis,a set of device was designed which was used to reduce the temperature of dill automatically. In the device,PT100 temperature module was used to complete real time collec-tion of data,and according to the size of temperature signal,the operational state of deep-hole drill was adjusted automatically through PLC. The function of automatically adjusting control of temperature for the deep-hole drill system and switching of manual /automatic modes were implemented. This device has good expansibility,agility,reliability and stability.%根据深孔钻削系统存在的热变形问题,利用ANSYS软件对干式内排屑深孔钻头进行热工分析。根据热分析结论,设计了一套自动降低钻头温度的装置。该装置应用PT100温度模块完成数据的实时采集,并根据温度信号的大小,通过PLC自动调整深孔钻头的运行状态,实现深孔钻削系统的自动温度调节控制、手动/自动模式切换等功能。该装置具有良好的可扩展性、灵活性和可靠稳定性。

  12. Stimulation Technologies for Deep Well Completions

    Energy Technology Data Exchange (ETDEWEB)

    None

    2003-09-30

    The Department of Energy (DOE) is sponsoring the Deep Trek Program targeted at improving the economics of drilling and completing deep gas wells. Under the DOE program, Pinnacle Technologies is conducting a study to evaluate the stimulation of deep wells. The objective of the project is to assess U.S. deep well drilling & stimulation activity, review rock mechanics & fracture growth in deep, high pressure/temperature wells and evaluate stimulation technology in several key deep plays. An assessment of historical deep gas well drilling activity and forecast of future trends was completed during the first six months of the project; this segment of the project was covered in Technical Project Report No. 1. The second progress report covers the next six months of the project during which efforts were primarily split between summarizing rock mechanics and fracture growth in deep reservoirs and contacting operators about case studies of deep gas well stimulation.

  13. Deep boreholes; Tiefe Bohrloecher

    Energy Technology Data Exchange (ETDEWEB)

    Bracke, Guido [Gesellschaft fuer Anlagen- und Reaktorsicherheit gGmbH Koeln (Germany); Charlier, Frank [NSE international nuclear safety engineering gmbh, Aachen (Germany); Geckeis, Horst [Karlsruher Institut fuer Technologie (Germany). Inst. fuer Nukleare Entsorgung; and others

    2016-02-15

    The report on deep boreholes covers the following subject areas: methods for safe enclosure of radioactive wastes, requirements concerning the geological conditions of possible boreholes, reversibility of decisions and retrievability, status of drilling technology. The introduction covers national and international activities. Further chapters deal with the following issues: basic concept of the storage in deep bore holes, status of the drilling technology, safe enclosure, geomechanics and stability, reversibility of decisions, risk scenarios, compliancy with safe4ty requirements and site selection criteria, research and development demand.

  14. Drilling on Mars---Mathematical Model for Rotary-Ultrasonic Core Drilling of Brittle Materials

    Science.gov (United States)

    Horne, Mera Fayez

    The results from the Phoenix mission led scientists to believe it is possible that primitive life exists below the Martian surface. Therefore, drilling in Martian soil in search for organisms is the next logical step. Drilling on Mars is a major engineering challenge due to the drilling depth requirement. Mars lacks a thick atmosphere and a continuous magnetic field that shield the planet's surface from solar radiation and solar flares. As a result, the Martian surface is sterile and if life ever existed, it must be found below the surface. In 2001, NASA's Mars Exploration Payload Advisory Group proposed that drilling should be considered as a priority investigation on Mars in an effort of finding evidence of extinct or extant life. On August 6, 2012, the team of engineers landed the spacecraft Curiosity on the surface of Mars by using a revolutionary hovering platform. The results from the Curiosity mission suggested the next logical step, which is drilling six meters deep in the red planet in search of life. Excavation tools deployed to Mars so far have been able to drill to a maximum depth of 6.5 cm. Thus, the drilling capabilities need to be increased by a factor or approximately 100 to achieve the goal of drilling six meters deep. This requirement puts a demand on developing a new and more effective technologies to reach this goal. Previous research shows evidence of a promising drilling mechanism in rotary-ultrasonic for what it offers in terms of high surface quality, faster rate of penetration and higher material removal rate. This research addresses the need to understand the mechanics of the drill bit tip and rock interface in rotary-ultrasonic drilling of brittle materials. A mathematical model identifying all contributing independent parameters, such as drill bit design parameters, drilling process parameters, ultrasonic wave amplitude and rocks' material properties, that have effect on rate of penetration is developed. Analytical and experimental

  15. A Perspective on the Unprecedented Impact of the 2015/16 El Niño on the Tropical Quelccaya Ice Cap, Peru from Four Decades of Surface Sampling and Deep Drilling

    Science.gov (United States)

    Thompson, L. G.; Mosley-Thompson, E.; Davis, M. E.; Beaudon, E.; Lin, P. N.

    2016-12-01

    Atmospheric warming ( 0.10oC/decade in the last 70 years) has been observed over the Peruvian Andes and is likely the most dominant forcing for recent glacier wasting. The margin of the Quelccaya ice cap (QIC, 13o56'S; 70o50'W 5670 m asl) has been retreating for the last 50 years as the 0oC isotherm now rises seasonally above the QIC summit. Recent major El Niños have augmented the effects of this warming trend, and the impacts of the 2015/16 El Niño were more devastating than those experienced during the 1982/83 event of similar magnitude. The ice margin has retreated and thinned dramatically over the last year, and currently the QIC is smaller than it has been in over 6 millennia. Since 1974 we have conducted a program of surface sampling and deep drilling on the QIC. The seasonal δ18O oscillations which are obvious in the fresh snow (and underlying firn) deposited within each thermal year are attenuated at depth due to melting and percolation through the firn, and this has become increasingly pronounced over 43 years. Although the trend in δ18O of the top layers has remained constant, the increasing density and decreasing seasonal amplitude suggest that surface warming is enhancing post-depositional effects even on fresh snow. Snow deposited during the 1982/83 and 2015/16 El Niños show comparable isotopic enrichment ( 5‰) over the average of "normal" and La Niña years, but the net balance during the latest event was 55% below average, while that for the 82/83 event was 10% below average. These observations suggest the possibility that a threshold has been crossed such that future El Niños may exert stronger impacts on Peruvian glaciers than in the past. The surface studies on the QIC show that the δ18O composition of the snow is affected by synoptic-scale variations in the upper atmosphere over the tropical western Atlantic and the northern Amazon Basin and by sea surface temperatures in the equatorial Pacific Ocean. During major El Niños the latter

  16. Geologic and geochemical results from boreholes drilled in Yellowstone National Park, Wyoming, 2007 and 2008

    Science.gov (United States)

    Jaworowski, Cheryl; Susong, David; Heasler, Henry; Mencin, David; Johnson, Wade; Conrey, Rick; Von Stauffenberg, Jennipher

    2016-06-01

    Between 2007 and 2008, seven Earthscope Plate Boundary Observatory (PBO) boreholes ranging in depth from about 200 to 800 feet deep were drilled in and adjacent to the Yellowstone caldera in Yellowstone National Park, for the purpose of installing volcano monitoring instrumentation. Five of the seven boreholes were equipped with strainmeters, downhole seismometers, and tiltmeters. Data collected during drilling included field observations of drill cuttings, stratigraphy within the boreholes, water temperature, and water and drill cuttings samples from selected depths.

  17. Advanced Seismic While Drilling System

    Energy Technology Data Exchange (ETDEWEB)

    Robert Radtke; John Fontenot; David Glowka; Robert Stokes; Jeffery Sutherland; Ron Evans; Jim Musser

    2008-06-30

    A breakthrough has been discovered for controlling seismic sources to generate selectable low frequencies. Conventional seismic sources, including sparkers, rotary mechanical, hydraulic, air guns, and explosives, by their very nature produce high-frequencies. This is counter to the need for long signal transmission through rock. The patent pending SeismicPULSER{trademark} methodology has been developed for controlling otherwise high-frequency seismic sources to generate selectable low-frequency peak spectra applicable to many seismic applications. Specifically, we have demonstrated the application of a low-frequency sparker source which can be incorporated into a drill bit for Drill Bit Seismic While Drilling (SWD). To create the methodology of a controllable low-frequency sparker seismic source, it was necessary to learn how to maximize sparker efficiencies to couple to, and transmit through, rock with the study of sparker designs and mechanisms for (a) coupling the sparker-generated gas bubble expansion and contraction to the rock, (b) the effects of fluid properties and dynamics, (c) linear and non-linear acoustics, and (d) imparted force directionality. After extensive seismic modeling, the design of high-efficiency sparkers, laboratory high frequency sparker testing, and field tests were performed at the University of Texas Devine seismic test site. The conclusion of the field test was that extremely high power levels would be required to have the range required for deep, 15,000+ ft, high-temperature, high-pressure (HTHP) wells. Thereafter, more modeling and laboratory testing led to the discovery of a method to control a sparker that could generate low frequencies required for deep wells. The low frequency sparker was successfully tested at the Department of Energy Rocky Mountain Oilfield Test Center (DOE RMOTC) field test site in Casper, Wyoming. An 8-in diameter by 26-ft long SeismicPULSER{trademark} drill string tool was designed and manufactured by TII

  18. Fifteen years of the Chinese Continental Scientific Drilling Program

    Science.gov (United States)

    Xu, Zhiqin; Yang, Jingsui; Wang, Chengshan; An, Zhisheng; Li, Haibing; Wang, Qin; Su, Dechen

    2017-05-01

    Continental scientific drilling can be regarded as a telescope into the Earth's interior because it provides process insight and uncompromised samples of rocks, fluids, and even sampled from the deep biosphere from the Earth's surface to great depths. As one of the three founding members of the International Continental Scientific Drilling Program (ICDP), ICDP China has made great achievements in many scientific drilling-related research fields. Based on the ICDP participation it attracted global attention of scientists and set up not only the Chinese Continental Scientific Drilling (CCSD) Program in 2001 but also a growing number of ambitious drilling projects in the country. The 5158 m deep borehole of the CCSD project at Donghai County in the Sulu ultrahigh-pressure metamorphic terrain demonstrates that large amounts of crustal rocks of the South China Block have been subducted to at least 120 km, followed by rapid uplift. After successful completion of drilling at Donghai, several continental scientific drilling projects were conducted with funding of the Chinese government and partially with support of ICDP, resulting in a total drilling depth of more than 35 000 m. These projects encompass the Continental Environmental Scientific Drilling Program of China, the Scientific Drilling Project of Wenchuan Earthquake Fault Zone, the Continental Scientific Drilling Project of Cretaceous Songliao Basin, and the Program of Selected Continental Scientific Drilling and Experiments. On the occasion of the 20th anniversary of the ICDP and the 15th anniversary of the CCSD Program, this paper reviews the history and major progress of the CCSD Program.

  19. Quality in drilling operations

    Energy Technology Data Exchange (ETDEWEB)

    Duncan, E.; Gervais, I. [Sedco Forex Jacintoport Facility, Channelview, TX (United States); Le Moign, Y.; Pangarkar, S.; Stibbs, B. [Sedco Forex, Montrouge (France); McMorran, P. [Sedco Forex, Pau (France); Nordquist, E. [Dubai Petroleum Company, Dubai (United Arab Emirates); Pittman, T. [Sedco Forex, Perth (Australia); Schindler, H. [Sedco Forex, Dubai (United Arab Emirates); Scott, P. [Woodside Offshore Petroleum Pty. Ltd., Perth (Australia)

    1996-12-31

    Driven by cost and profitability pressures, quality has taken on new meaning and importance in the oil field during the past decade. In drilling operations, new initiatives have led to cooperative team efforts between operators and drilling contractors to enhance quality. In this article examples are given of how one drilling contractor, by adopting a quality culture, is reaping major benefits for its clients as well as its employees. 22 figs., 19 refs.

  20. Stimulation Technologies for Deep Well Completions

    Energy Technology Data Exchange (ETDEWEB)

    Stephen Wolhart

    2005-06-30

    The Department of Energy (DOE) is sponsoring the Deep Trek Program targeted at improving the economics of drilling and completing deep gas wells. Under the DOE program, Pinnacle Technologies conducted a study to evaluate the stimulation of deep wells. The objective of the project was to review U.S. deep well drilling and stimulation activity, review rock mechanics and fracture growth in deep, high-pressure/temperature wells and evaluate stimulation technology in several key deep plays. This report documents results from this project.

  1. Drilling cost-cutting

    Energy Technology Data Exchange (ETDEWEB)

    Capuano, L.E. Jr.

    1996-12-31

    This presentation by Louis E. Capuano, Jr., President, ThermaSource, Inc., discusses cost-cutting in the drilling phase of geothermal energy exploration and production. All aspects of a geothermal project including the drilling must be streamlined to make it viable and commercial. If production could be maximized from each well, there would be a reduction in drilling costs. This could be achieved in several ways, including big hole and multi-hole completion, directional drilling, better knowledge of the resource and where to penetrate, etc.

  2. MWD tool for deep, small diameter boreholes

    Energy Technology Data Exchange (ETDEWEB)

    Buytaert, J.P.R.; Duckworth, A.

    1992-03-17

    This patent describes an apparatus for measuring a drilling parameters while drilling a borehole in an earth formation, wherein the borehole includes a small diameter deep borehole portion and a large diameter upper borehole portion. It includes small diameter drillstring means for drilling the deep borehole portion; sensor means, disposed within the small diameter drillstring means, for measuring a drilling parameter characteristic of the deep portion of the borehole while drilling the deep portion of the borehole and for providing sensor output signals indicative of the measured parameter; an upper drillstring portion extending between the surface of the formation and the small diameter drillstring means, the upper drillstring portion including a large diameter drillstring portion; data transmission means disposed within the large diameter drillstring portion and responsive to the sensor output.

  3. Horizontal drilling in Ontario

    Energy Technology Data Exchange (ETDEWEB)

    Sidey, P.; Precul, L. [Sproule Associates Ltd., Calgary, AB (Canada)

    2002-07-01

    A review of oil and gas production in Ontario was presented with particular reference to drilling activity between 1987 to mid 2002 when 1450 vertical wells were drilled, of which 1100 were for petroleum production and the remainder were for gas storage, observation wells, private gas wells and stratigraphic tests. Of the 1100 vertical wells drilled for petroleum production, 40 per cent became gas wells, 16 per cent became oil wells, 4 per cent became oil and gas wells, and 40 per cent were dry. During the same time period, 133 horizontal wells were also drilled, mostly for petroleum. The most active operator was Talisman Energy, which drilled 101 of the 133 horizontal wells. The remainder were drilled by 12 other companies. Of the horizontal wells, 64 per cent became oil wells, 19 per cent became gas wells, and 17 per cent were dry. This presentation included graphs depicting which oil and gas pools saw vertical or horizontal drilling during the designated time period, and explained how the wells were classified. Both horizontal and vertical well targets were illustrated. Particular reference was made to Talisman Energy's Lake Erie Drilling program which revealed that horizontal wells have an initial production rate that is 5 times that expected from vertical wells. The Hillman Pool case study revealed that the initial rate of the average horizontal well is less than half that of the average vertical well. Horizontal drilling in the Lake Erie Morpeth Gas pool has also been a commercial success. This paper demonstrates that operators have maintained Ontario's oil and gas production at high levels. In 1997 widespread horizontal drilling began taking place in Ontario, and since then, approximately 30 per cent of the wells drilled in the province have been horizontal. 16 figs.

  4. Closed-loop steerable drilling tools for high temperature applications

    Energy Technology Data Exchange (ETDEWEB)

    Donati, F.; Oppelt, J.; Ragnitz, D. [and others

    1995-12-31

    Today drilling environment calls for drillers to be able to access deeper, high temperature and high pressure reservoirs, where high temperature is intended close to 200{degrees}C and high pressure more than 10000 psi. A new family of automatic drilling tools has been introduced which provides automatic steering within ultra deep formations under high temperature and high pressure (HTHP) conditions. Another important use of this system is foreseen in the drilling of wells with extended reach horizontal sections. The directional changes in the Closed-Loop Drilling System are automatically generated on the basis of Measurement While Drilling (MWD) measurements taken directly within the tool. Since the major application aims at the very deep hydrocarbon layers, all components are designed to operate at temperatures between 185 to 200{degrees}C. Special consideration is given to the design of downhole motor elastomer and electronic components of the MWD. In preparation for the field application of the complete fully directional tool, field tests have been performed with a Straight Hole Drilling Closed-Loop System and other essential system components. The Straight Hole Drilling Device has been designed to drill a straight vertical well. It has been successfully run on various onshore and offshore European locations; where in one case a maximum depth of over 7,200 m was attained. Additional field case histories are provided in this report on high temperature downhole motors. The complete fully directional system will be ready for field application within end of June 1995.

  5. The multi-task barge: a floating deep-sea production, storage and unloading unit, with surface production heads and drilling installations; La barge multifonctions: une unite flottante de production, de stockage et dechargement en eau profonde, avec tetes de production en surface et installations de forage

    Energy Technology Data Exchange (ETDEWEB)

    Valenchon, C.; Rossig, J.H. [Bouygues Offshore (France); Pouget, G. [Sedco-Forex (France); Biolley, F. [Institut Francais du Petrole, 92 - Rueil-Malmaison (France)

    1998-05-01

    The multi-task barge is devoted to the exploitation of deep-sea fields in rather good conditions. It has been designed to bring together within a single installation, a production, storage and unloading unit and the necessary means for the drilling, the connecting and the work-over of wells. Thus submarine well-heads and well-head platforms are no longer needed. When the field configuration or the use of oriented drillings allows to group several wells together, the multi-task platform allows to use more economical surface production heads installed on steel rigid risers. This concept requires less investments thanks to less expensive drilling operations and restricted submarine installations, and to easier well operations and lower exploitation costs. Crude oil storage is ensured to up to about 2 millions of barrels. This paper presents the design aspects and the dynamical analysis of risers with the methods used. The tensioning and mooring system is examined and the advantages of the cylindrical float system is underlined and compared to the classical hydro-pneumatic systems. (J.S.) 11 refs.

  6. 交货期固定的工件准时完工数 ——最大排序问题的多项式时间算法%Job Completed Just-In-Time in Single Machine and Parajllel Machins Scheduling Problem

    Institute of Scientific and Technical Information of China (English)

    张峰

    2000-01-01

    In this paper, we discuss the scheduling problem of maximal number of jobs which must be completed at its due date Just-In-Time. We research two cases, single machine and parallel machine. We give two polynomial time algorithm to solve these two cases respectively.%给出了求解交货期固定的工件准时完工数最大的排序问题的多项式时间算法。

  7. Drilling Optimization: A Review

    Directory of Open Access Journals (Sweden)

    Abhilash M Bharadwaj

    2013-06-01

    Full Text Available With rapidly growing global demand for energy resources, oil and gas exploration & production companies face mounting pressure to maximize supply and increase the rate of discovery for new energy sources. Increasingly operating in more remote locations and investing heavily in equipment and facilities, companies face greater financial and operational risks than ever before. Optimization of drilling parameters during drilling operations aims to optimize weight on bit, bit rotation speed for obtaining maximum drilling rate as well as minimizing the drilling cost. Communication and computer technologies are among the most important disciplines which can contribute to drilling optimization. Large amount of data could be piped through different locations on the planet in reliable and time efficient manners.

  8. Distributed downhole drilling network

    Science.gov (United States)

    Hall, David R.; Hall, Jr., H. Tracy; Fox, Joe; Pixton, David S.

    2006-11-21

    A high-speed downhole network providing real-time data from downhole components of a drilling strings includes a bottom-hole node interfacing to a bottom-hole assembly located proximate the bottom end of a drill string. A top-hole node is connected proximate the top end of the drill string. One or several intermediate nodes are located along the drill string between the bottom-hole node and the top-hole node. The intermediate nodes are configured to receive and transmit data packets transmitted between the bottom-hole node and the top-hole node. A communications link, integrated into the drill string, is used to operably connect the bottom-hole node, the intermediate nodes, and the top-hole node. In selected embodiments, a personal or other computer may be connected to the top-hole node, to analyze data received from the intermediate and bottom-hole nodes.

  9. Drilling Optimization: A Review

    Directory of Open Access Journals (Sweden)

    Vinayaka S

    2012-08-01

    Full Text Available With rapidly growing global demand for energy resources, oil and gas exploration & production companies face mounting pressure to maximize supply and increase the rate of discovery for new energy sources. Increasingly operating in more remote locations and investing heavily in equipment and facilities, companies face greater financial and operational risks than ever before. Optimization of drilling parameters during drilling operations aims to optimize weight on bit, bit rotation speed for obtaining maximum drilling rate as well as minimizing the drilling cost. Communication and computer technologies are among the most important disciplines which can contribute to drilling optimization. Large amount of data could be piped through different locations on the planet in reliable and time efficient manners.

  10. Advanced drilling systems study.

    Energy Technology Data Exchange (ETDEWEB)

    Pierce, Kenneth G.; Livesay, Billy Joe; Finger, John Travis (Livesay Consultants, Encintas, CA)

    1996-05-01

    This report documents the results of a study of advanced drilling concepts conducted jointly for the Natural Gas Technology Branch and the Geothermal Division of the U.S. Department of Energy. A number of alternative rock cutting concepts and drilling systems are examined. The systems cover the range from current technology, through ongoing efforts in drilling research, to highly speculative concepts. Cutting mechanisms that induce stress mechanically, hydraulically, and thermally are included. All functions necessary to drill and case a well are considered. Capital and operating costs are estimated and performance requirements, based on comparisons of the costs for alternative systems to conventional drilling technology, are developed. A number of problems common to several alternatives and to current technology are identified and discussed.

  11. Unique Microbial Community in Drilling Fluids from Chinese Continental Scientific Drilling

    Science.gov (United States)

    Zhang, G.; Dong, H.; Jiang, H.; Xu, Z.

    2005-12-01

    Circulating drilling fluid is often regarded as a contamination source in investigations of subsurface microbiology. However, it also provides an opportunity to sample geological fluids at depth and to study contained microbial communities. During our study of deep subsurface microbiology of Chinese Continental Scientific Deep drilling project, we collected 6 drilling fluid samples from a borehole from 2290 to 5100 m below the ground surface. Microbial communities in these samples were characterized with cultivation-dependent and -independent techniques. Characterization of 16S rRNA genes indicated that the bacterial clone sequences related to Firmicutes became progressively dominant with increased depth. Most sequences were related to anaerobic, thermophilic, halophilic or alkaliphilic bacteria. These habitats were consistent with the measured geochemical characteristics of the drilling fluids that have incorporated geological fluids and partly reflected the in-situ conditions. Several clone types were closely related to Thermoanaerobacter ethanolicus, Caldicellulosiruptor lactoaceticus, and Anaerobranca gottschalkii, an anaerobic metal-reducer, an extreme thermophile, and an anaerobic chemoorganotroph, respectively. Their optimal growth temperature was between 50-85-aC. Anaerobic, thermophilic Fe(III) reducing bacterial isolates were obtained and they were capable of reducing Fe(III) in iron oxide and clay mineral to produce siderite and vivianite, and illite, respectively. Anaerobic, thermophilic Fe(II) oxidizing bacterial isolate was able to oxidize Fe(II) in clay structure. Biological iron redox cycles may be present in the deep subsurface. The archaeal diversity was low. Most archaeal sequences were not related to known cultivated species, but to environmental clone sequences recovered from subsurface marine environments. We infer that the detected microbes were derived from geological fluids at depth and their growth habitats reflected the deep subsurface

  12. The Application of A Case Study of the Just-in-time Teaching Mode in Vocational College Course:Teaching"Engineering Mechanics"%适时教学模式在高职课程教学中的应用研究--以“工程力学”为例

    Institute of Scientific and Technical Information of China (English)

    茆琦

    2013-01-01

    Considering the current lack of integration between information technology and curriculum teaching mode in domestic vocational colleges,Just-in-time teaching teaching mode is introduced and its content and implementation process are discussed.Taking the course of "Engineering Mechanics" as an example this paper stadies the Just-in-time teaching mode in teaching planning,and analyzes the network curriculum structure and teaching implementation.By comparison,the value of the Just-in-time teaching mode vocational teaching is verified.%指出当前国内高职院校在信息技术与课程整合教学模式上的缺失,引入适时教学模式,分析探讨了适时教学模式的涵义和实施流程。并以“工程力学”课程为例,研究了适时教学模式下的教学规划、网络课程结构和教学实施等环节的开展方法。通过对比分析验证了适时教学模式在高职教学中的应用价值。

  13. 一种利用电化学钝化极化现象的超深小孔电火花复合加工工艺%A New Electro-discharge Drilling Technique Based on Electrochemical Passivation Effect of Avoiding Side Discharge for Ultra Deep Micro Hole Machine-shaping

    Institute of Scientific and Technical Information of China (English)

    马名峻; 王德新

    2015-01-01

    通过对超深小孔电火花复合加工工艺的试验研究,研发了一种液体成膜的低浓度电解质环保水溶液,作为电火花高速小孔机专用工作液,用于超深小孔的电火花复合加工,成功解决了大深径比超深小孔的电火花加工工艺难题。而其中独具特点的“电极管平头低损耗”现象,也为解决诸如钨钼类高熔金属超深小孔及航空发动机叶片气膜孔加工等难题找到了一种新的工艺方法。%To drill the ultra deep micro hole by electrical-discharge machining technique ,mass of experiments were carried out with kinds of different technical approach. At last ,a new kind of appropriative working fluid was developed ,with which a layer of electrochemical passivation insulating film could be formed on the inner hole wall of the work piece to avoid side discharge ,the shape of the end of the electrode is flat instead of cone ,as a result. At the same time ,electrode loss was decreased significantly,based on which the efficiency of electrical-discharge drilling was improved. This kind of electrical-discharge machining working fluid could be applied for drilling deep hole on the tungsten molybdenum materials and manufacturing cooling film holes on aero engine blade.

  14. Advanced Seismic While Drilling System

    Energy Technology Data Exchange (ETDEWEB)

    Robert Radtke; John Fontenot; David Glowka; Robert Stokes; Jeffery Sutherland; Ron Evans; Jim Musser

    2008-06-30

    A breakthrough has been discovered for controlling seismic sources to generate selectable low frequencies. Conventional seismic sources, including sparkers, rotary mechanical, hydraulic, air guns, and explosives, by their very nature produce high-frequencies. This is counter to the need for long signal transmission through rock. The patent pending SeismicPULSER{trademark} methodology has been developed for controlling otherwise high-frequency seismic sources to generate selectable low-frequency peak spectra applicable to many seismic applications. Specifically, we have demonstrated the application of a low-frequency sparker source which can be incorporated into a drill bit for Drill Bit Seismic While Drilling (SWD). To create the methodology of a controllable low-frequency sparker seismic source, it was necessary to learn how to maximize sparker efficiencies to couple to, and transmit through, rock with the study of sparker designs and mechanisms for (a) coupling the sparker-generated gas bubble expansion and contraction to the rock, (b) the effects of fluid properties and dynamics, (c) linear and non-linear acoustics, and (d) imparted force directionality. After extensive seismic modeling, the design of high-efficiency sparkers, laboratory high frequency sparker testing, and field tests were performed at the University of Texas Devine seismic test site. The conclusion of the field test was that extremely high power levels would be required to have the range required for deep, 15,000+ ft, high-temperature, high-pressure (HTHP) wells. Thereafter, more modeling and laboratory testing led to the discovery of a method to control a sparker that could generate low frequencies required for deep wells. The low frequency sparker was successfully tested at the Department of Energy Rocky Mountain Oilfield Test Center (DOE RMOTC) field test site in Casper, Wyoming. An 8-in diameter by 26-ft long SeismicPULSER{trademark} drill string tool was designed and manufactured by TII

  15. Rotary and Rotary-Percussive Drilling of Lunar Simulant

    Science.gov (United States)

    Paulsen, G.; Zacny, K.; Maksymuk, M.; Wilson, J.; Santoro, C.; Chu, P.; Davis, K.; Roberts, D.; Kumar, N.; Kusack, A.

    2008-12-01

    Honeybee Robotics has been developing a rotary and a rotary-preliminary drill system for planetary exploration. This is a test drill with a power rating of 1000 Watt, whose purpose it to test various drill bits and augers in rotary and rotary percussive operation. It is not optimized for power or mass but rather to acquire qualitative drilling data such as penetration rate, power, and torque, temperature, Weight on Bit, vibration energy and others. In addition, the design of the drill allows it to acquire drill bit temperatures and use pneumatic system (instead of augers) for removing of rock cuttings. The drill is designed to have a 1 meter stroke. In addition to the drill system, we have been developing a matching split vacuum chamber, which is 3ft wide, 3ft deep and 11 feet tall. The chamber consists of two smaller chambers (84 inches tall and 48 inches tall) assembled on top of each other. This allows for additional flexibility if only a smaller chamber is required for some testing. The chamber will be able to maintain pressure of below 1 torr. Maintaining sample temperature will be achieved by closed loop cooling system down to -40C or by using liquid nitrogen that allows a temperature of 77K. The test samples can be varied raging from solid rocks, to loose soils to icy soils and pure ice. The sample holder could also be integrated with temperatures for acquiring of thermal data during drilling process.

  16. Application program of CRUST-1 10km continental scientific drilling rig in SK-2 scientific drilling well

    Science.gov (United States)

    Sun, Youhong; Gao, Ke; Yu, Ping; Liu, Baochang; Guo, Wei; Ma, Yinlong; Yang, Yang

    2014-05-01

    SK-2 Well is located in DaQing city,where is site of the largest oil field in China,Heilongjiang province, north-east of China.The objective of SK-2 well is to obtain full cores of cretaceous formation in Song Liao basin,and to build the time tunnel of Cretaceous greenhouse climate change,and to clarify the causes,processes and results of the formations of DaQing oil field. This will ensure to achieve our ultimate goals,to test the CRUST-1 drilling rig and improve China's deep scientific drilling technology,to form the scientific drilling technology,method and system with independent intellectual property rights,and to provide technical knowledge and information for China's ten kilometers super-deep scientific drilling technical resources.SK-2 Well is at 6400 meter depth, where the drilling inclination is 90 degree and the continuous coring length is 3535 meter that from 2865 to 6400 meter,the recovery rate of the core is greater or equal to 95 percent with 100 millimeters core diameter and 3.9 degree per 100 meter geothermal gradient.The CRUST-1 rig is designated with special drilling equipment for continental scientific drilling combined to the oil drilling equipment ability with advanced geological drilling technology which is highly automatic and intelligent. CRUST-1 drilling ability is 10000 meter with the maximum hook load 700 tons, the total power is 4610 Kilowatt.CRUST-1 will be integrated with a complete set of automation equipment,including big torque hydraulic top drive,high accuracy automatic drilling rod feeding system, suspended automatic drill string discharge device,hydraulic intelligent iron roughneck,and hydraulic automatic catwalk to fully meet the drilling process requirements of SK-2.Designed with advanced drilling technique for 260 degree in the bottom of SK-2 well and hard rock,including the drilling tools of high temperature hydraulic hammer,high temperature resistance and high strength aluminum drill pipe,high temperature preparation of mud

  17. Drilling through the largest magma chamber on Earth: Bushveld Igneous Complex Drilling Project (BICDP)

    Science.gov (United States)

    Trumbull, R. B.; Ashwal, L. D.; Webb, S. J.; Veksler, I. V.

    2015-05-01

    A scientific drilling project in the Bushveld Igneous Complex in South Africa has been proposed to contribute to the following scientific topics of the International Continental Drilling Program (ICDP): large igneous provinces and mantle plumes, natural resources, volcanic systems and thermal regimes, and deep life. An interdisciplinary team of researchers from eight countries met in Johannesburg to exchange ideas about the scientific objectives and a drilling strategy to achieve them. The workshop identified drilling targets in each of the three main lobes of the Bushveld Complex, which will integrate existing drill cores with new boreholes to establish permanently curated and accessible reference profiles of the Bushveld Complex. Coordinated studies of this material will address fundamental questions related to the origin and evolution of parental Bushveld magma(s), the magma chamber processes that caused layering and ore formation, and the role of crust vs. mantle in the genesis of Bushveld granites and felsic volcanic units. Other objectives are to study geophysical and geodynamic aspects of the Bushveld intrusion, including crustal stresses and thermal gradient, and to determine the nature of deep groundwater systems and the biology of subsurface microbial communities.

  18. Development and Manufacture of Cost-Effective Composite Drill Pipe

    Energy Technology Data Exchange (ETDEWEB)

    James C. Leslie

    2008-12-31

    Advanced Composite Products and Technology, Inc. (ACPT) has developed composite drill pipe (CDP) that matches the structural and strength properties of steel drill pipe, but weighs less than 50 percent of its steel counterpart. Funding for the multiyear research and development of CDP was provided by the U.S. Department of Energy Office of Fossil Energy through the Natural Gas and Oil Projects Management Division at the National Energy Technology Laboratory (NETL). Composite materials made of carbon fibers and epoxy resin offer mechanical properties comparable to steel at less than half the weight. Composite drill pipe consists of a composite material tube with standard drill pipe steel box and pin connections. Unlike metal drill pipe, composite drill pipe can be easily designed, ordered, and produced to meet specific requirements for specific applications. Because it uses standard joint connectors, CDP can be used in lieu of any part of or for the entire steel drill pipe section. For low curvature extended reach, deep directional drilling, or ultra deep onshore or offshore drilling, the increased strength to weight ratio of CDP will increase the limits in all three drilling applications. Deceased weight will reduce hauling costs and increase the amount of drill pipe allowed on offshore platforms. In extreme extended reach areas and high-angle directional drilling, drilling limits are associated with both high angle (fatigue) and frictional effects resulting from the combination of high angle curvature and/or total weight. The radius of curvature for a hole as small as 40 feet (12.2 meters) or a build rate of 140 degrees per 100 feet is within the fatigue limits of specially designed CDP. Other properties that can be incorporated into the design and manufacture of composite drill pipe and make it attractive for specific applications are corrosion resistance, non-magnetic intervals, and abrasion resistance coatings. Since CDP has little or no electromagnetic force

  19. Age and compositional data of zircon from sepiolite drilling mud to identify contamination of ocean drilling samples

    Science.gov (United States)

    Andrews, Graham D. M.; Schmitt, Axel K.; Busby, Cathy J.; Brown, Sarah R.; Blum, Peter; Harvey, Janet. C.

    2016-08-01

    Zircon extracted from drilled oceanic rocks is increasingly used to answer geologic questions related to igneous and sedimentary sequences. Recent zircon studies using samples obtained from marine drill cores revealed that drilling muds used in the coring process may contaminate the samples. The JOIDES Resolution Science Operator of the International Ocean Discovery Program has been using two types of clays, sepiolite and attapulgite, which both have salt water viscosifier properties able to create a gel-like slurry that carries drill cuttings out of the holes several hundred meters deep. The dominantly used drilling mud is sepiolite originating from southwestern Nevada, USA. This sepiolite contains abundant zircon crystals with U-Pb ages ranging from 1.89 to 2889 Ma and continental trace element, δ18O, and ɛHf isotopic compositions. A dominant population of 11-16 Ma zircons in sepiolite drilling mud makes identification of contamination in drilled Neogene successions particularly challenging. Interpretation of zircon analyses related to ocean drilling should be cautious of zircon ages in violation of independently constrained age models and that have age populations overlapping those in the sepiolite. Because individual geochronologic and geochemical characteristics lack absolute discriminatory power, it is recommended to comprehensively analyze all dated zircon crystals from cores exposed to drill mud for trace element, δ18O, and ɛHf isotopic compositions. Zircon analyzed in situ (i.e., in petrographic sections) are assumed to be trustworthy.

  20. Mechanical Analysis of Deep Sea Risers Considering the Effects of Drill String%考虑钻柱作用的深海隔水管柱力学分析

    Institute of Scientific and Technical Information of China (English)

    闫铁; 刘珊珊; 毕雪亮; 王鹏; 李井辉; 逯广东

    2014-01-01

    As an important equipment of offshore oil drilling,the safe use of the risers are directly related to whether the whole drilling operations can be accomplished successfully,even to the whole drilling platform security.At present,researches on riser mechanical analysis were mainly focused on the influences of the ocean environment loads and drilling platform drift,but few on the drill string factors which brought errors to the calculating results.A mechanical model of the risers in deepwater drilling is established,considering the effects of drill string lateral force and axial friction on the risers’lateral deformation and bending moment when tripping up.The model was numerically derived by the finite difference method.Research results show that the lateral de-formation of the risers increases by 7.9% under the influences of the drill string and maximum bending loads appear on the surface of the water.This model provides a theoretical analysis meth-od for the marine riser design,safe use,and deepwater drilling wellhead safety.%隔水管作为海洋石油钻井的重要设备,其安全使用直接关系到整个钻井作业的顺利完成,甚至关系到钻井平台的安全。目前关于隔水管的研究主要集中在海洋环境载荷及钻井平台漂移影响下的隔水管柱力学分析,对于隔水管内部钻柱这一影响因素研究较少,这给计算结果带来了较大误差。考虑起钻过程中钻柱侧向力、轴向摩阻对隔水管横向位移、弯矩的影响,建立了深水钻井时隔水管柱力学模型,用数值差分法进行求解。研究结果表明:考虑钻柱影响下隔水管横向变形影响幅度增加7.9%。靠近水面的位置,隔水管所受弯曲载荷最大。该模型为海洋隔水管设计、安全使用、以及深水钻井井口安全等提供理论分析方法。

  1. Drilling and well technology

    Energy Technology Data Exchange (ETDEWEB)

    Milheim, K. [Mining University Leoben Institute for Drilling Technology, (Austria)

    1996-12-31

    Over a billion dollars a year is lost by exploration and production companies drilling wells because of the lack of learn curve management (LMC) practices. This paper presents the importance of the LMC concept, what it is, why LMC has not yet been recognized as a major initiative for improving drilling cost performance. The paper discusses the different types of planning, problems with implementation of plans, the use and misuse of drilling results and data bases, and the lack of post analysis practices. The major point of the paper is to show the massive savings that can be achieved by valuing LMC, learning LMC and successfully implementing LMC. . 2 refs., 5 figs.

  2. 76 FR 11812 - Drill Pipe and Drill Collars From China

    Science.gov (United States)

    2011-03-03

    ... Register on September 9, 2010 (75 FR 54912). The hearing was held in Washington, DC, on January 5, 2011... COMMISSION Drill Pipe and Drill Collars From China Determinations On the basis of the record \\1\\ developed in... of imports of drill pipe and drill collars from China, provided for in subheadings 7304.22,...

  3. 75 FR 10501 - Drill Pipe and Drill Collars from China

    Science.gov (United States)

    2010-03-08

    ... publishing the notice in the Federal Register of January 6, 2010 (75 FR 877). The conference was held in... COMMISSION Drill Pipe and Drill Collars from China Determinations On the basis of the record \\1\\ developed in... injury by reason of imports from China of drill pipe and drill collars, provided for in subheadings...

  4. Scientific Drilling with the Sea Floor Drill Rig MeBo

    Directory of Open Access Journals (Sweden)

    Gerold Wefer

    2007-09-01

    Full Text Available In March 2007 the sea floor drill rig MeBo (short for “Meeresboden-Bohrgerät”, ‘sea floor drill rig’ in German returned from a 17-day scientific cruise with the new German research vessel Maria S. Merian. Four sites between 350 m and 1700 m water depth were sampled at the continental slope off Morocco by push coring and rotary drilling. Up to 41.5-m-long sediment cores were recovered from Miocene, Pliocene, and Pleistocene marls. MeBo bridges the gapbetween conventional sampling methods from standard multipurpose research vessels (gravity corer, piston corer, dredges and drill ships. Most bigger research vessels will be able to support deployment of the MeBo. Since the drill system can be easily transported within 20-ft containers, worldwide operation from vessels of opportunity is possible. With the MeBo a new system is available for marine geosciences that allows the recovery of high quality samples from soft sediments and hard rock from the deep sea withoutrelying on the services of expensive drilling vessels.

  5. Nonpolluting drilling fluid composition

    Energy Technology Data Exchange (ETDEWEB)

    Larson, D.E.; Mocek, C.J.; Mouton, R.J.

    1983-02-22

    Disclosed is a nonpolluting drilling fluid composition. The composition mixture consisting essentially of a concentrate and any nonpolluting oil. The concentrate consists essentially of diethanolamide, a fatty acid, and a imidazoline/amide mixture.

  6. Discussion about Processing Deep hole Parts with Gun Drill Technology in CNC Lathe%枪钻技术在数控车床上加工深孔零件的探讨

    Institute of Scientific and Technical Information of China (English)

    徐怀淋

    2016-01-01

    在科技快速发展的时代,枪钻技术在数控车床上的广泛应用使零件的质量逐步提高,加工效率也有了很大提高。枪钻技术的应用,不仅节约了资金,也降低了企业生产成本,有利于企业的发展。%In the era of rapid development of science and technology,gun drill technology is widely applied in the numerical control lathe to improve the quality of parts and processing efficiency.The application of the gun drill technology not only reduces the production cost but also benefits the enterprise's development.

  7. Drilling the North Anatolian Fault

    Directory of Open Access Journals (Sweden)

    Mustafa Aktar

    2008-07-01

    Full Text Available An international workshop entitled “GONAF: A deep Geophysical Observatory at the North Anatolian Fault”, was held 23–27 April 2007 in Istanbul, Turkey. The aim of this workshop was to refine plans for a deep drilling project at the North Anatolian Fault Zone (NAFZ in northwestern Turkey. The current drilling target is located in the Marmara Sea offshore the megacity of Istanbul in the direct vicinity of the main branch of the North Anatolian Fault on the PrinceIslands (Figs. 1 and 2.The NAFZ represents a 1600-km-long plate boundary that slips at an average rate of 20–30 mm·yr-1 (McClusky et al., 2000. It has developed in the framework of the northward moving Arabian plate and the Hellenic subduction zone where the African lithosphere is subducting below the Aegean. Comparison of long-term slip rates with Holocene and GPS-derived slip rates indicate an increasing westwardmovement of the Anatolian plate with respect to stable Eurasia. During the twentieth century, the NAFZ has ruptured over 900 km of its length. A series of large earthquakes starting in 1939 near Erzincan in Eastern Anatolia propagated westward towards the Istanbul-Marmara region in northwestern Turkey that today represents a seismic gap along a ≥100-km-long segment below the Sea of Marmara. This segment did not rupture since 1766 and, if locked, may have accumulated a slip deficit of 4–5 m. It is believed being capable of generating two M≥7.4 earthquakes within the next decades (Hubert-Ferrari et al., 2000; however, it could even rupture in a large single event (Le Pichon et al., 1999.

  8. Drilling Technology for Deep Inclined Hole in Chengjiagou-Shagou Silver Multi-metal Mine%洛宁程家沟-沙沟银多金属矿中深斜孔钻探技术

    Institute of Scientific and Technical Information of China (English)

    时志兴

    2013-01-01

    The occurrence is steep with ore concentrating in Chengjiagou-Shagou silver polymetallic ore deposit.Because drilling designs are mostly branch holes with medium depth and large slope, the borehole quality is the key technology.By the construction case of 1550m inclined hole, the paper introduces the selection of medium-depth inclined hole drilling technology and the concrete measures for ensuring drilling hole curvature.%洛宁程家沟-沙沟银多金属矿区矿床产状陡,矿体集中,钻探设计多为分支孔,钻孔中深、斜度大。如何要在保证效益的情况下确保钻孔质量成为关键技术。通过1550 m斜孔施工实例,介绍了矿区中深斜孔钻探工艺的选择及保证钻孔弯曲度的具体措施。

  9. Paramagnetism shielding in drilling fluid

    OpenAIRE

    Li,Zhuo

    2013-01-01

    In drilling operations, drilling fluid containing magnetic materials is used when drilling a well. The materials can significantly shield the Earth’s magnetic field as measured by magnetic sensors inside the drilling strings. The magnetic property of the drilling fluid is one of the substantial error sources for the determination of magnetic azimuth for wellbores. Both the weight material, cuttings, clay and other formation material plus metal filings from the tubular wear m...

  10. Modeling pellet impact drilling process

    OpenAIRE

    Kovalev, Artem Vladimirovich; Ryabchikov, Sergey Yakovlevich; Isaev, Evgeniy Dmitrievich; Ulyanova, Oksana Sergeevna

    2016-01-01

    The paper describes pellet impact drilling which could be used to increase the drilling speed and the rate of penetration when drilling hard rocks. Pellet impact drilling implies rock destruction by metal pellets with high kinetic energy in the immediate vicinity of the earth formation encountered. The pellets are circulated in the bottom hole by a high velocity fluid jet, which is the principle component of the ejector pellet impact drill bit. The experiments conducted has allowed modeling t...

  11. Application on drilling parameter monitor in drilling engineering monitoring

    Institute of Scientific and Technical Information of China (English)

    Shu DIAO; Zhenbao LING; Wenjing LIANG

    2008-01-01

    The drilling parameter monitor is an important tool in drilling engineering applied to monitoring drilling process, carrying out scientific analysis and decision-making. Based on discussing the present development situation of the domestic and foreign drilling machine parameter monitors, the metering scheme for vehicle-loaded drilling parameter monitor was designed. By using detection system for MSP430 single-chip microcomputer (SCM) in combination with peripheral circuit such as sensors, the drilling-rig control system was obtained to detect, and for every parameter in real-time display in order to keep operating the drilling rig status. The experiment shows that the drilling parameter monitor reaches design requirements and can be applied to drilling engineering monitoring, which has characters such as simple structure, high credibility and low cost.

  12. 30 CFR 203.43 - To which production do I apply the RSV earned from qualified deep wells or qualified phase 1...

    Science.gov (United States)

    2010-07-01

    ... RELIEF OR REDUCTION IN ROYALTY RATES OCS Oil, Gas, and Sulfur General Royalty Relief for Drilling Deep..., you began drilling an original deep well with a perforated interval the top of which is 18,200 feet... using the RSV that it earned. You subsequently drill another original deep well with a...

  13. Seismic Prediction While Drilling (SPWD: Looking Ahead of the Drill Bit by Application of Phased Array Technology

    Directory of Open Access Journals (Sweden)

    Marco Groh

    2010-04-01

    Full Text Available Geophysical exploration is indispensable for planning deep drilling. Usually 2D- or 3D-seismics investigations are applied and, depending on the resulting geologic model for the underground, the drill site and drilling path are determined. In recent years the focus of exploration has shifted towards small-scale geological structures such as local layers and faults. Depending on the source frequencies and the target depth, 2D- or 3D-seismics from surface cannot always resolve such structures in particular at larger depths. In general, signal frequencies of about 30–70 Hz are typical for surface seismic methods. The deeper and smaller the sought-after structures are, the worse will be the resolution. Therefore, borehole seismic measurements like Vertical Seismic Profile (VSP or Seismic While Drilling (SWD have been developed (Fig. 1. For the VSP method geophones are normally integrated in the borehole, while the seismicsource generates seismic waves at the surface. The SWD method uses the drill bit as the seismic source. Hence, the quality of the seismic signals is highly dependent on the drilled rock and the type of drill bit, but even well-suited rock conditions and adequate drilling may not provide sufficient data quality.

  14. Horizontal Directional Drilling (HDD) Technology and Applications

    Institute of Scientific and Technical Information of China (English)

    J. G. Cai; X. N. Wang

    2004-01-01

    @@ 1 What is Horizontal Directional Drilling? Horizontal Directional Drilling, accurately steered drilling, has become state -of- the -art drilling technique in the world. Specially- designed directionsteerable corebarrel and accurate direction measurement tool are available for the use together with wire line core drilling machine. That makes it feasible to extract cores and to measure the drill travel line &length while drilling in a curve.

  15. Effect of Agents on Hydrate Formation and Low-Temperature Rheology of Polyalcohol Drilling Fluid

    Institute of Scientific and Technical Information of China (English)

    Guosheng Jiang; Fulong Ning; Ling Zhang; Yunzhong Tu

    2011-01-01

    In order to ensure safe drilling in deep water and marine gas hydrate bearing sediments,the needed characteristics of drilling fluid system were analyzed.Moreover,the effect of different agents on hydrate formation and the low-temperature rheology of designed polyalcohol drilling fluid were tested,respectively.The results show that clay can promote gas hydrate growth,while modified starch and polyalcohol can inhibit hydrate formation to some extent,and PVP K90 has a good performance on hydrate inhibition.The influence of clay on low-temperature rheology of polyglycols drilling fluid is notable.Therefore,the clay-free polyalcohol drilling fluid is suitable for deep water and marine gas hydrate drilling under optimal conditions.

  16. Evacuation drill at CMS

    CERN Multimedia

    Niels Dupont-Sagorin and Christoph Schaefer

    2012-01-01

    Training personnel, including evacuation guides and shifters, checking procedures, improving collaboration with the CERN Fire Brigade: the first real-life evacuation drill at CMS took place on Friday 3 February from 12p.m. to 3p.m. in the two caverns located at Point 5 of the LHC.   CERN personnel during the evacuation drill at CMS. Evacuation drills are required by law and have to be organized periodically in all areas of CERN, both above and below ground. The last drill at CMS, which took place in June 2007, revealed some desiderata, most notably the need for a public address system. With this equipment in place, it is now possible to broadcast audio messages from the CMS control room to the underground areas.   The CMS Technical Coordination Team and the GLIMOS have focused particularly on preparing collaborators for emergency situations by providing training and organizing regular safety drills with the HSE Unit and the CERN Fire Brigade. This Friday, the practical traini...

  17. Chinese Drilling Crews Active Worldwide

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    @@ China Great Wall Drilling Company signed a US$5 million contract with Tunis Joint Venture Petroleum Company in late April for drilling five wells in the middle coastal area of Tunis. This is the first time Tunis has invited the tenders from foreign companies for a drilling project. The participants in the bidding include other 11 drilling companies from the United States, Australia, Croatia and other countries. The drilling operation is expected to start from June this year. Founded in 1995, Great Wall Drilling Company is a subsidiary of CNPC International Engineering Company. The drilling company is now operating more than 50 Chinesemade drilling rigs overseas and involved in the drilling projects in 15 countries and regions such as Sudan, Iran, Indonesia, Egypt, Canada, Kazakhstan,Venezuela and other countries. The Tunis project is the 15th one of the company.

  18. A Proposal for Research and Development of an Explosive Drilling Technique for Geothermal Wells

    Energy Technology Data Exchange (ETDEWEB)

    None

    1975-10-01

    In order to make large scale use of the geothermal energy available it will be necessary to drill many thousands of holes deep into the earth. The objective of the proposed research is to greatly decrease drilling time and cost. Studies made of a new explosive drilling technique indicate that savings in time of from 70 to 80 percent. The research plan is to utilize explosive in the form of multiple-faced shaped charge capsules. [DJE-2005

  19. Computer monitors drilling performance

    Energy Technology Data Exchange (ETDEWEB)

    1984-05-01

    Computer systems that can monitor over 40 drilling variables, display them graphically, record and transmit the information have been developed separately by two French companies. The systems, Vigigraphic and Visufora, involve the linking of a master computer with various surface and downhole sensors to measure the data on a real-time (as experienced) basis and compute the information. Vigigraphic is able to produce graphic displays grouped on four screens - drilling, tripping, geological and mud data. It computes at least 200 variables from the sensor readings, and it can store over 100 variables. Visufora allows the operator to group the drilling variables as desired. It can monitor and analyze surface and downhole parameters. The system can be linked with MWD tools. Twenty channels of input are assigned to surface values and the remaining 20 channels can be used to monitor downhole instrumentation.

  20. The Oman Drilling Project

    Science.gov (United States)

    Matter, J.; Kelemen, P. B.; Teagle, D. A. H.

    2014-12-01

    With seed funds from the Sloan Foundation, the International Continental Drilling Program (ICDP) approved a proposal by 39 international proponents for scientific drilling in the Oman ophiolite. Via observations on core, geophysical logging, fluid sampling, hydrological measurements, and microbiological sampling in a series of boreholes, we will address long-standing, unresolved questions regarding melt and solid transport in the mantle beneath oceanic spreading ridges, igneous accretion of oceanic crust, mass transfer between the oceans and the crust via hydrothermal alteration, and recycling of volatile components in subduction zones. We will undertake frontier exploration of subsurface weathering processes in mantle peridotite, including natural mechanisms of carbon dioxide uptake from surface waters and the atmosphere, and the nature of the subsurface biosphere. Societally relevant aspects include involvement and training of university students, including numerous students from Sultan Qaboos University in Oman. Studies of natural mineral carbonation will contribute to design of engineered systems for geological carbon dioxide capture and storage. Studies of alteration will contribute to fundamental understanding of the mechanisms of reaction-driven cracking, which could enhance geothermal power generation and extraction of unconventional hydrocarbon resources. We hope to begin drilling in late 2015. Meanwhile, we are seeking an additional $2M to match the combined Sloan and ICDP funding from national and international funding agencies. Matching funds are needed for operational costs of drilling, geophysical logging, downhole fluid sampling, and core description. Information on becoming part of the named investigator pool is in Appendix 14 (page 70) of the ICDP proposal, available at https://www.ldeo.columbia.edu/gpg/projects/icdp-workshop-oman-drilling-project. This formal process should begin at about the time of the 2014 Fall AGU Meeting. Meanwhile, potential

  1. Unique microbial community in drilling fluids from Chinese continental scientific drilling

    Science.gov (United States)

    Zhang, G.; Dong, H.; Jiang, H.; Xu, Z.; Eberl, D.D.

    2006-01-01

    Circulating drilling fluid is often regarded as a contamination source in investigations of subsurface microbiology. However, it also provides an opportunity to sample geological fluids at depth and to study contained microbial communities. During our study of deep subsurface microbiology of the Chinese Continental Scientific Deep drilling project, we collected 6 drilling fluid samples from a borehole from 2290 to 3350 m below the land surface. Microbial communities in these samples were characterized with cultivation-dependent and -independent techniques. Characterization of 16S rRNA genes indicated that the bacterial clone sequences related to Firmicutes became progressively dominant with increasing depth. Most sequences were related to anaerobic, thermophilic, halophilic or alkaliphilic bacteria. These habitats were consistent with the measured geochemical characteristics of the drilling fluids that have incorporated geological fluids and partly reflected the in-situ conditions. Several clone types were closely related to Thermoanaerobacter ethanolicus, Caldicellulosiruptor lactoaceticus, and Anaerobranca gottschalkii, an anaerobic metal-reducer, an extreme thermophile, and an anaerobic chemoorganotroph, respectively, with an optimal growth temperature of 50-68??C. Seven anaerobic, thermophilic Fe(III)-reducing bacterial isolates were obtained and they were capable of reducing iron oxide and clay minerals to produce siderite, vivianite, and illite. The archaeal diversity was low. Most archaeal sequences were not related to any known cultivated species, but rather to environmental clone sequences recovered from subsurface environments. We infer that the detected microbes were derived from geological fluids at depth and their growth habitats reflected the deep subsurface conditions. These findings have important implications for microbial survival and their ecological functions in the deep subsurface.

  2. Algebra task & drill sheets

    CERN Document Server

    Reed, Nat

    2011-01-01

    For grades 6-8, our State Standards-based combined resource meets the algebraic concepts addressed by the NCTM standards and encourages the students to review the concepts in unique ways. The task sheets introduce the mathematical concepts to the students around a central problem taken from real-life experiences, while the drill sheets provide warm-up and timed practice questions for the students to strengthen their procedural proficiency skills. Included are opportunities for problem-solving, patterning, algebraic graphing, equations and determining averages. The combined task & drill sheets

  3. Algebra task & drill sheets

    CERN Document Server

    Reed, Nat

    2011-01-01

    For grades 3-5, our State Standards-based combined resource meets the algebraic concepts addressed by the NCTM standards and encourages the students to review the concepts in unique ways. The task sheets introduce the mathematical concepts to the students around a central problem taken from real-life experiences, while the drill sheets provide warm-up and timed practice questions for the students to strengthen their procedural proficiency skills. Included are opportunities for problem-solving, patterning, algebraic graphing, equations and determining averages. The combined task & drill sheets

  4. Drill on Android

    OpenAIRE

    2013-01-01

    HES-SO DRILLER est une application de drill disponible sur Cyberlearn qui permet aux utilisateurs d’effectuer des quizz relatifs à la programmation. Le principe étant que les professeurs créent leurs quizz et les étudiants puissent y jouer. Les scores obtenus sont comptabilisés et comparés sur Facebook. Ce projet a pour but d’analyser cette application et de l’adapter afin de l’utiliser sur un client mobile Android sous le nom de Drill on Android.

  5. Effect on the Performance of Drilling Fluids at Downhole Rock Surfaces at Low Temperatures

    Institute of Scientific and Technical Information of China (English)

    Mingming Zheng; Guosheng Jiang; Tianle Liu; Fulong Ning; Ling Zhang; V F Chikhotkin

    2016-01-01

    To maintain gas hydrate stability, low-temperature drilling fluids and high drilling speeds should be used while drilling in gas hydrate-bearing sediments. The effect of the drilling fluid on downhole rock surfaces at low temperatures is very important to increase the drilling rate. This paper analyzed the action mechanism of the drilling fluid on downhole rock surfaces and established a corresponding evaluation method. The softening effect of six simulated drilling fluids with 0.1 wt.% of four common surfactants and two common organic salts on the downhole rock surface strength was evaluated experimentally using the established method at low temperature. The experimental results showed that the surfactants and organic salts used in the drilling fluids aided in the reduction of the strength of the downhole rock surface, and the established evaluation method was able to quantitatively reveal the difference in the softening effect of the different drilling fluids through comparison with water. In particular, the most common surfactant that is used in drilling fluids, sodium dodecyl sulfate (SDS), had a very good softening effect while drilling under low-temperature conditions, which can be widely applied during drilling in low-temperature formations, such as natural gas hydrate-bearing sediments, the deep seafloor and permafrost.

  6. Intelligent Detection of Drill Wear

    Science.gov (United States)

    Liu, T. I.; Chen, W. Y.; Anatharaman, K. S.

    1998-11-01

    Backpropagation neural networks (BPNs) were used for on-line detection of drill wear. The neural network consisted of three layers: input, hidden, and output. The input vector comprised drill size, feed rate, spindle speed, and eight features obtained by processing the thrust and torque signals. The output was the drill wear state which either usable or failure. Drilling experiments with various drill sizes, feed rates and spindle speeds were carried out. The learning process was performed effectively by utilising backpropagation with smoothing and an activation function slope. The on-line detection of drill wear states using BPNs achieved 100% reliability even when the drill size, feed rate and spindle speed were changed. In other words, the developed on-line drill wear detection systems have very high robustness and hence can be used in very complex production environments, such as flexible manufacturing systems.

  7. Initial Feasibility Study to Drill and Core the Ocean Mantle

    Directory of Open Access Journals (Sweden)

    Nicolas Pilisi

    2011-09-01

    Full Text Available An initial feasibility study (Pilisi and Whitney, 2011 of drilling through the Mohorovičić discontinuity (Moho into the oceanic mantle specifically focused on future requirements for planning, drilling and coring a hole 500 m into the oceanic mantle from three candidate locations in the Pacific Ocean (Cocos Plate, Baja California, and offshore Hawaii. The study points out some of the critical issues that need to be resolved before embarking upon such a challengingproject. It was conducted on the basis of data provided by the Integrated Ocean Drilling Program–Management International (IODP-MI, the Center for Deep Earth Exploration (CDEX operating the drilling vessel Chikyu within IODP, public domain information, and past experience that Blade Energy Partners (hereafter mentioned as “Blade”; http://www.blade-energy.com/ has had with frontier projects in the offshore deepwater oil and gas and geothermal industries.

  8. Steerable shaft drilling

    Energy Technology Data Exchange (ETDEWEB)

    Pigott, C.P. (Pigott Shaft Drilling Ltd., Preston (UK))

    1990-03-01

    The paper outlines the techniques of steerable shaft drilling and gives brief details of the various machines currently available to carry out this task. It summarizes the many potential benefits of using this method, which could lead to more mines having multiple shafts, each serving a specific purpose. 8 figs.

  9. Contamination effects of drilling fluid additives on cement slurry

    Directory of Open Access Journals (Sweden)

    Youzhi Zheng

    2015-10-01

    Full Text Available During the cementation of deep wells, contamination at the contact surface between cement slurry and drilling fluid will present a technical challenge, which may threaten operation safety. To deal with the problem, lab tests and analysis were performed specifically on the compatibility of fluids during cementation in Sichuan and Chongqing gas fields. Impacts of commonly used additives for drilling fluids were determined on fluidity and thickening time of conventional cement slurry. Through the infrared spectrum analysis, SEM and XRD, infrared spectrum data of kalium polyacrylamide (KPAM and bio-viscosifier were obtained, together with infrared spectrum, SEM and XRD data of cement slurry with additives. Contamination mechanisms of the cement slurry by conventional additives for drilling fluid were reviewed. Test results show that both KPAM and bio-viscosifier are such high-molecular materials that the long chains in these materials may easily absorb cement particles in the slurry to form mixed network structures; as a result, cement particles were prone to agglomeration and eventually lost their pumpability. Finally, assessment of and testing methods for the contamination effects of drilling fluid additives on cement slurry were further improved to form standards and codes that may help solve the said problems. This study will provide technological supports for the preparation of drilling fluids with desirable properties prior to cementation, the selection of optimal drilling fluids additives, and the development of innovative drilling fluids additives.

  10. Significance of ocean drilling and China's paleooceanographic studies

    Institute of Scientific and Technical Information of China (English)

    LIU Tungsheng

    2003-01-01

    @@ Many significant progresses of earth science in the mid to late 20th century were closely related to the international Deep Sea Drilling Program (DSDP). The sedimentary record obtained from underneath several thousands of seawater opened a new window for mankind to understand the Earth and its evolution. The Chinese earth science community learned the DSDP through the introduction of the plate tectonic theory in the 1970s, but deep-sea study remained remote and unrealistic for the then China. The onset of the Ocean Drilling Program (ODP) in 1985 triggered the hope for China to be involved in the international paleoceanographic studies. With the establishment of an "Ocean Drilling Program Committee of China", the aim was to bring China onto the new international frontier of science, but little could be done because of the lack of necessary conditions at the time.

  11. Just-in-Time Contracting in the Department of Defense

    Science.gov (United States)

    1991-12-01

    process. [Ref.39:p.74] In this case the supplier loads the seats onto the delivery truck in the order of utilization on the assembly line. Robots are...The company has invested heavily in new manufacturing equipment including the use of robotics in fabricating parts. This innovation on the part of...Depot Naval Air Station Alameda, California 94501 8. Ms. Nancy Morris 1 USAMC MRSA , AMXMD-SS Lexington, Kentucky 40511-5101 9. Cdr. Barbara Riester 1

  12. Just-in-time: maximizing its success potential.

    Science.gov (United States)

    Johnston, S K

    1990-08-01

    The effective implementation and use of JIT manufacturing practices depends largely on the education, training, and commitment of all levels of management to a fundamental quality-first policy. Management must transfer and demonstrate that commitment to every level and extension of the manufacturing endeavor. As a company establishes and reaches toward that goal, the move to JIT manufacturing practices becomes rational and justifiable. Failing to establish and commit to a quality directive greatly diminishes the potential benefits of JIT. If all levels of manufacturing participate in the JIT planning, implementing, and maintenance procedure, the realization of positive change and improvement drives the process. Total participation makes the task of JIT implementation not only possible, but practical. Enhanced mutual respect for all concerned is a likely consequence, advancing the productive environment.

  13. Just in time: an update on continuum neurogenetics.

    Science.gov (United States)

    Rost, Natalia S

    2011-04-01

    The field of neurogenetics has been revolutionized by the advances in genome-wide association testing. Recent gene discoveries for disorders of neurodegeneration, CNS demyelination, and neurodevelopmental and cerebrovascular syndromes begin to shape our understanding of the complexity of their underlying genetic architecture. In the future, this knowledge should advance risk prediction, prevention, diagnosis, and treatment strategies for patients with neurologic disorders and their families.

  14. JIST: Just-In-Time Scheduling Translation for Parallel Processors

    Directory of Open Access Journals (Sweden)

    Giovanni Agosta

    2005-01-01

    Full Text Available The application fields of bytecode virtual machines and VLIW processors overlap in the area of embedded and mobile systems, where the two technologies offer different benefits, namely high code portability, low power consumption and reduced hardware cost. Dynamic compilation makes it possible to bridge the gap between the two technologies, but special attention must be paid to software instruction scheduling, a must for the VLIW architectures. We have implemented JIST, a Virtual Machine and JIT compiler for Java Bytecode targeted to a VLIW processor. We show the impact of various optimizations on the performance of code compiled with JIST through the experimental study on a set of benchmark programs. We report significant speedups, and increments in the number of instructions issued per cycle up to 50% with respect to the non-scheduling version of the JITcompiler. Further optimizations are discussed.

  15. Just-in time system and climate change

    Energy Technology Data Exchange (ETDEWEB)

    Caceres, J.; Richards, D.

    1999-10-01

    The recent trends in freight transportation and its relationship with production and distribution were analyzed. This was done in an effort to help policy makers develop strategies to reduce greenhouse gas emissions and to develop a freight transportation system and a route system that is environmentally, economically and socially sustainable. One of the ways to find a solution is to restructure the overall industry organization and its link to transportation and the economy. However, this method is met with a lot of resistance by policy makers. Another method would be to find a way to delay or avoid restructuring; for example, by using unlimited greenhouse gas emissions trading. By doing so, emissions reductions would be targeted where they are most economically efficient. 18 refs., 1 fig.

  16. Just-in-time Data Distribution for Analytical Query Processing

    NARCIS (Netherlands)

    Ivanova, M.G.; Kersten, M.L.; Groffen, F.E.

    2012-01-01

    Distributed processing commonly requires data spread across machines using a priori static or hash-based data allocation. In this paper, we explore an alternative approach that starts from a master node in control of the complete database, and a variable number of worker nodes for delegated

  17. Just-In-Time Data Distribution for Analytical Query Processing

    NARCIS (Netherlands)

    Ivanova, M.; Kersten, M.; Groffen, F.

    2012-01-01

    Distributed processing commonly requires data spread across machines using a priori static or hash-based data allocation. In this paper, we explore an alternative approach that starts from a master node in control of the complete database, and a variable number of worker nodes for delegated query pr

  18. 45130-Drilling Crew First Enter into the International Drilling Market

    Institute of Scientific and Technical Information of China (English)

    Song Zhixian; Drilling

    1995-01-01

    @@ 45130-Drilling Crew subordinate to the Fourth Drilling Company of Zhongyuan Petroleum Exploration Bureau, won the two bids of risk exploration drilling projects, respectively for China Ltd. Co. of New Zealand Petroleum Exploration Company worked in the Dongtinghu Basin in 1992 and Amoco Orient Oil Co.worked in the Fuyang area, Anhui Province in November of 1993.According to the two contracts that have been signed, the two drilling wells were successfully completed,all drilling parameters are in accordance with the requirements of both contracts.

  19. Sea Bed Drilling Technology MARUM-MeBo: Overview on recent scientific drilling campaigns and technical developments

    Science.gov (United States)

    Freudenthal, Tim; Bergenthal, Markus; Bohrmann, Gerhard; Pape, Thomas; Kopf, Achim; Huhn-Frehers, Katrin; Gohl, Karsten; Wefer, Gerold

    2017-04-01

    The MARUM-MeBo (abbreviation for Meeresboden-Bohrgerät, the German expression for seafloor drill rig) is a robotic drilling system that is developed since 2004 at the MARUM Center for Marine Environmental Sciences at the University of Bremen in close cooperation with Bauer Maschinen GmbH and other industry partners. The MARUM-MeBo drill rigs can be deployed from multipurpose research vessel like, RV MARIA S. MERIAN, RV METEOR, RV SONNE and RV POLARSTERN and are used for getting long cores both in soft sediments as well as hard rocks in the deep sea. The first generation drill rig, the MARUM-MeBo70 is dedicated for a drilling depth of more than 70 m (Freudenthal and Wefer, 2013). Between 2005 and 2016 it was deployed on 17 research expeditions and drilled about 3 km into different types of geology including carbonate and crystalline rocks, gas hydrates, glacial tills, sands and gravel, glacial till and hemipelagic mud with an average recovery rate of about 70 %. We used the development and operational experiences of MARUM-MeBo70 for the development of a second generation drill rig MARUM-MeBo200. This drill rig is dedicated for conducting core drilling down to 200 m below sea floor. After successful sea trials in the North Sea in October 2014 the MeBo200 was used on a scientific expedition on the research vessel RV SONNE (SO247) in March/April 2016. During 12 deployments we drilled altogether 514 m in hemipelagic sediments with volcanic ashes as well as in muddy and sandy slide deposits off New Zealand. The average core recovery was about 54%. The maximum drilling depth was 105 m below sea floor. Developments for the MeBo drilling technology include the development of a pressure core barrel that was successfully deployed on two research expeditions so far. Bore hole logging adds to the coring capacity. Several autonomous logging probes have been developed in the last years for a deployment with MeBo in the logging while tripping mode - a sonic probe measuring in