WorldWideScience

Sample records for jurassic nugget sandstone

  1. Architecture of an Upper Jurassic barrier island sandstone reservoir, Danish Central Graben:

    DEFF Research Database (Denmark)

    Johannessen, Peter N.; Nielsen, Lars H.; Nielsen, Lars

    2010-01-01

    An unusually thick (c. 88 m), transgressive barrier island and shoreface sandstone succession characterizes the Upper Jurassic Heno Formation reservoir of the Freja oil field situated on the boundary of Denmark and Norway. The development and preservation of such thick transgressive barrier islan...... such that the island aggraded and even prograded seawards and became wider and longer due to the large surplus of sand....

  2. Upper Jurassic - Lower Cretaceous turbidite sandstones in the Central Graben, North Sea; with special focus on the Danish Gertrud Graben

    Energy Technology Data Exchange (ETDEWEB)

    Johannessen, P.

    1998-10-01

    Thick Late Jurassic - Early cretaceous turbidite sandstone successions in the Central Graben are uncommon except from the Moray Firth and Viking Graven north of the Central Graben, where several important hydrocarbon producing turbidite sandstone fields are known. The only hydrocarbon producing turbidite reservoir sandstones in the Central Graben is the up to 55 m thick Ribble Sandstone Member located in the British South-west Central Graben, where it is lying above thick shoreface reservoir sandstones of the Fulmar Formation, separated by offshore claystones of the Kimmeridge Clay Formation. The turbidite sandstones of the Ribble Sandstone Member derived from the more proximal thick reservoir sandstones of the Fulmar Formation located near the Mid North Sea High. It has not yet been possible to correlate thick shoreface sandstones of the Norwegian Ula Formation or the Danish Heno Formation to more distal thick turbidite sandstones derived from the shoreface sandstones. (au) 60 fig., 85 refs.

  3. Oxfordian-Kimmeridgian (Late Jurassic) reservoir sandstones in the Witch Ground Graben, U. K. North Sea

    Energy Technology Data Exchange (ETDEWEB)

    Harker, S.D. (Occidental Petroleum (Caledonia) Ltd., Aberdeen (United Kingdom)); Mantel, K.A. (Narwhal, London (United Kingdom)); Morton, D.J. (Deminex U.K. Oil and Gas Ltd., London (United Kingdom)); Riley, L.A. (Paleoservices, Watford (United Kingdom))

    1991-03-01

    Oil-bearing Late Jurassic Oxfordian-Kimmeridgian sandstones of the Sgiath and Piper formations are of major economic importance in the Witch Ground Graben. They form the reservoirs in Scott, which in 1993 will be the largest producing North Sea oil field to come on stream for more than a decade. Together with Scott, the Piper, Saltire, Tartan, Highlander, Petronella, Rob Roy, and Ivanhoe fields contained almost 2 Bbbl of recoverable reserves in these formations. The Sgiath and Piper represent two phases of Late Jurassic transgression and regression, initially represented by paralic deposited sand culminating in a wave-dominated delta sequence. The history of the Sgiath and Piper formations is reviewed and lithostratigraphic and biostratigraphic correlations presented to illustrate the distribution of the reservoir sandstones.

  4. A new Basal sauropodomorph dinosaur from the Lower Jurassic Navajo sandstone of Southern Utah.

    Directory of Open Access Journals (Sweden)

    Joseph J W Sertich

    Full Text Available BACKGROUND: Basal sauropodomorphs, or 'prosauropods,' are a globally widespread paraphyletic assemblage of terrestrial herbivorous dinosaurs from the Late Triassic and Early Jurassic. In contrast to several other landmasses, the North American record of sauropodomorphs during this time interval remains sparse, limited to Early Jurassic occurrences of a single well-known taxon from eastern North America and several fragmentary specimens from western North America. METHODOLOGY/PRINCIPAL FINDINGS: On the basis of a partial skeleton, we describe here a new basal sauropodomorph dinosaur from the Lower Jurassic Navajo Sandstone of southern Utah, Seitaad ruessi gen. et sp. nov. The partially articulated skeleton of Seitaad was likely buried post-mortem in the base of a collapsed dune foreset. The new taxon is characterized by a plate-like medial process of the scapula, a prominent proximal expansion of the deltopectoral crest of the humerus, a strongly inclined distal articular surface of the radius, and a proximally and laterally hypertrophied proximal metacarpal I. CONCLUSIONS/SIGNIFICANCE: Phylogenetic analysis recovers Seitaad as a derived basal sauropodomorph closely related to plateosaurid or massospondylid 'prosauropods' and its presence in western North America is not unexpected for a member of this highly cosmopolitan clade. This occurrence represents one of the most complete vertebrate body fossil specimens yet recovered from the Navajo Sandstone and one of the few basal sauropodomorph taxa currently known from North America.

  5. The stratigraphy of Oxfordian-Kimmeridgian (Late Jurassic) reservoir sandstones in the Witch Ground Graben, United Kingdom North Sea

    Energy Technology Data Exchange (ETDEWEB)

    Harker, S.D. (Elf Enterprise Caledonia Ltd., Aberdeen (United Kingdom)); Mantel, K.A. (Narwhal, London (United Kingdom)); Morton, D.J. (Deminex UK Oil Gas Ltd., London (United Kingdom)); Riley, L.A. (Paleo Services, Hertfordshire (United Kingdom))

    1993-10-01

    Oil-bearing Upper Jurassic Oxfordian-Kimmeridgian sandstones of the Sgiath and Piper formations are of major economic importance in the Witch Ground Gaben, United Kingdom North Sea. They form the reservoirs in 14 fields that originally contained 2 billion bbl of oil reserves, including Scott Field, which in 1993 will be the largest producing United Kingdom North Sea oil field to come on stream in more than a decade. The Sgiath and Piper formations represent Late Jurassic transgressive and regressive phases that began with paralic deposition and culminated in a wave-dominated delta system. These phases preceded the major grabel rifting episode (late Kimmeridgian to early Ryazanian) and deposition of the Kimmeridge Clay Formation, the principal source rock of the Witch Ground Graben oil fields. A threefold subdivision of the middle to upper Oxfordian Sgiath Formation is formally proposed, with Scott field well 15/21a-15 as the designated reference well. The basal Skene Member consists of thinly interbedded paralic carbonaceous shales, coals, and sandstones. This is overlain by transgressive marine shales of the Saltire Member. The upper-most Oxfordian Scott Member consists of shallow marine sandstones that prograded to the southwest. The contact of the Sgiath and Piper formations is a basinwide transgressive marine shale (I shale), which can act as an effective barrier to fluid communication between the Sgiath and Piper reservoir sandstones.

  6. Reconstruction of the diagenesis of the fluvial-lacustrine- deltaic sandstones and its influence on the reservoir quality evolution-- Evidence from Jurassic and Triassic sandstones, Yanchang Oil Field, Ordos Basin

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The reservoir quality of Jurassic and Triassic fluvial and lacustrine-deltaic sandstones of the Yanchang Oil Field in the Ordos Basin is strongly influenced by the burial history and facies-related diagenetic events. The fluvial sandstones have a higher average porosity (14.8%) and a higher permeability (12.7×10?3 ?m2) than those of the deltaic sandstones (9.8% and 5.8 ×10?3 ?m2, respectively). The burial compaction, which resulted in 15% and 20% porosity loss for Jurassic and Triassic sandstones, respectively, is the main factor causing the loss of porosity both for the Jurassic and Triassic sandstones. Among the cements, carbonate is the main one that reduced the reservoir quality of the sandstones. The organic acidic fluid derived from organic matter in the source rocks, the inorganic fluid from rock-water reaction during the late diagenesis, and meteoric waters during the epidiagenesis resulted in the formation of dissolution porosity, which is the main reason for the enhancement of reservoir-quality.

  7. Sandstone-body structures and ephemeral stream processes in the Dinosaur Canyon Member, Moenave Formation (Lower Jurassic), Utah, U.S.A.

    Science.gov (United States)

    Olsen, Henrik

    1989-02-01

    Studies of fluvial sandstone-body structures in the Lower Jurassic Dinosaur Canyon Member suggest a threefold subdivision of the ephemeral stream deposits. Sandstone-sheets with interbedded siltstones are less than 1 m thick and laterally extensive for hundreds of metres. They are interpreted as sheetflood deposits. Simple channel sandstone-bodies are a few metres thick and a few tens of metres wide. They reflect solitary channel incision, episodic migration and plugging. Multistorey channel sandstone-bodies are a few metres thick and laterally extensive for hundreds of metres. They are composed of several channel-shaped storeys and exhibit only local incision. The multistorey sandstone-bodies are interpreted as braided ephemeral stream deposits. Two sandstone-sheet subtypes with grooves and mounds, respectively, are interpreted as intermediate between the sheetflood deposits and solitary incised channel deposits on one hand and between sheetflood deposits and braided stream deposits on the other hand. The solitary channels and braided streams are accordingly interpreted to be initiated from sheetfloods through differential erosion and differential deposition, respectively. This model of channel evolution from sheetfloods is probably applicable to other semiarid and arid fluvial environments dominated by surface runoff.

  8. Degradation processes and consolidation of Late Jurassic sandstone dinosaur tracks in museum environment (Museum of Lourinhã, Portugal)

    Science.gov (United States)

    Leal, Sofia; mateus, Octavio; Tomas, Carla; Dionisio, Amelia

    2014-05-01

    The current study aims to conciliate conservation and restoration museology diagnosis with paleontological and geological curational needs and has, as subject of study, dinosaur footprints (vertebrates fossils). The footprints have been being exposed since 2004 in the paleontology hall of the Museum of Lourinhã, Portugal, and are part of a important paleontological collection of Late Jurassic vertebrate fossils from Lourinhã Formation. Presently, it is considered a unique heritage in danger of disappearing due to high decay level of disaggregation of its geological structure. The dinosaur footprints, (ML557) found, more precisely, on a coastline cliff in Lourinhã, Porto das Barcas, Lagido do Forno (coordinate 39° 14. 178'N, 9° 20. 397'W), Jurassic period, on the 5th of June 2001, by Jesper Milàn. This cliff of high slope presents sedimentary stratigraphic characteristics of a sandstone/siltstone of gray and red colors, by the '' Munsell scale and Color Chart''. Geological the tracks are Late Jurassic in age, and colected in the Lourinhã Formation, Praia Azul Member, of the Lusitanian Basin. There are three natural infills tridactyl tracks, possibly ascribed to ornithopod, a bipedal herbivore, resultant of a left foot movement, right and left. Footprints have 300-400mm of wide and 330-360mm of height with round fingers, which are elongated due to some degradation/erosion. In 2001, the footprints were collected from the field, cleaned, consolidated and glued in the laboratory of the Museum of Lourinhã before being exhibited in a museum display. Stone matrix was removed and a consolidation product applied, probably a polyvinyl acetate, of the brand Plexigum. The footprint with broken central digit was glued with an epoxy resin, Araldite. Both applied products were confirmed by analysis of µ-FTIR (Fourier Transform Infrared Spectroscopy) and both presented colour change and detachment surface problems. After collecting and storing, in 2004, footprints were

  9. Rock doughnut and pothole structures of the Clarens Fm. Sandstone in the Karoo Basin, South Africa: Possible links to Lower Jurassic fluid seepage

    Science.gov (United States)

    Grab, Stefan; Svensen, Henrik

    2011-08-01

    South Africa has a wealth of sandstone landforms, yet many of these have not been examined in detail to expand knowledge on their morphology and process origins. Here we present data on primary morphological statistics, rock hardness, surface roughness and petrographic investigations of rock doughnuts and associated pothole structures in Golden Gate Highlands National Park (GGHNP) and in the Witkop III complex, with the aim of using such data and field observations to argue their likely origins. Schmidt hammer R-values indicate consistently harder doughnut rims (mean = 48.7; n = 150) than the enclosed potholes (mean = 37.8; n = 150) and surrounding sandstone platform (mean = 39.7; n = 250). The petrography of Clarens Fm. Sandstone shows that the typical whitish sandstone is affected by intense chemical weathering. Pothole rims and the irregular reddish crust typical of the Witkop III outcrops show a secondary cementation by microcrystalline silica. Although preservation of old land surfaces is difficult to prove, small and circular pipe structures filled with calcite-cemented sand are present locally surrounding the Witkop III hydrothermal complex, and represent conduits for fluidized sand. Based on the morphologies of the Witkop III summit with the associated potholes and pipes, we hypothesize that they are remnants of morphologies created by Jurassic fluid seepage, with a superimposed and secondary silica cementation. Given that fluidization structures evidently occur in Clarens Fm. Sandstone, as is the case at Witkop, such mechanisms could possibly have contributed to the observed rock doughnut structures elsewhere on Clarens Fm. Sandstones, such as at the GGHNP where the rock doughnut morphological attributes are typical to landforms originating from fluid venting.

  10. Stratigraphy and sedimentology of a basement-onlapping shallow marine sandstone succession, the Charcot Bugt Formation, Middle-Upper Jurassic, East Greenland

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, M.; Piasecki, S. [Geological Survey of Denmark and Greenland, Copenhagen (Denmark)]. Geocenter; Surlyk, F. [Univ. of Copenhagen, Copenhagen (Denmark)]. Geological Inst.

    2003-07-01

    A rocky shore developed in early Middle Jurassic times by transgression of the crystalline basement in Milne'Land at the western margin of the East Greenland rift basin. The basement is onlapped by shallow marine sandstones of the Charcot Bugt Formation, locally with a thin fluvial unit at the base. The topography of the onlap surface suggests that a relative sea-level rise of at least 300 m took place in Early Bathonian - Middle Oxfordian times. The sea-level rise was punctuated by relative stillstands and falls during which progradation of the shoreline took place. Palynological data tied to the Boreal ammonite stratigraphy have greatly improved time resolution within the Charcot Bugt Formation, and the Jurassic succession in Milne Land can now be understood in terms of genetically-related depositional systems with a proximal to distal decrease in grain size. The sequence stratigraphic interpretation suggests that translation of the depositional systems governed by relative sea-level changes resulted in stacking of sandstone-dominated falling stage deposits in the Bastern, basinwards parts of Milne Land, whereas thick, remarkably coarsegrained transgressive systems tract deposits formed along the western basin margin. The bulk of the Charcot Bugt Formation consists of stacked sandstone-dominated shoreface units that prograded during highstands. The overall aggradational to backstepping stacking pattem recognised in the Charcot Bugt Formation is comparable to that in the contemporaneous Pelion Formation of the Jameson Land Basin and in correlative units of the mid-Norway shelf and the Northern North Sea. We suggest that the long-term evolution of the depositional systems may have been controlled by long-term eustatic rise acting in concert with relative sea-level changes reflecting regionally contemporaneous phases of rift initiation, dimax and gradual cessation of rifting. (au)

  11. Composition of sandstone and heavy minerals implies the provenance of Kuqa Depression in Jurassic, Tarim basin, China

    Institute of Scientific and Technical Information of China (English)

    WU Chaodong; LIN Changsong; SHEN Yanping; FENG Xue

    2005-01-01

    The petrological characteristics and heavy mineral assembly of the Jurassic System in Kuqa Basin are consistent with the tectonic evolution, which is the major factor controlling the filling process of Kuqa Basin. Controlled by the source areas at the both sides of the Basin, the matrixes are dominated by sedimentary rock, high-grade metamorphic rock, acid magmatic rock, and the highest heavy mineral assemblage of zircon-garnet-magnetite in the content. According to heavy mineral indexes, the Jurassic strata can be classified into three rhythmic units of heavy mineral. The lower sequence contains abundant heavy minerals and relatively high content of detritus and its matrixes primarily came form the recycling orogen. The assemblage of "zircon-garnet-magnetite" indicates that the sedimentary area in the early evolution period of the basin is relatively near the provenance. The middle sequence is different from the lower sequence in the heavy mineral assemblage and has the different characteristics from that of source rock. The heavy mineral assemblage is "garnet-zircon" with the highest content of garnet and its main matrices are the high-grade metamorphic rock, acid magmatic rock and hydrothermal vein at the northeastern edge of the basin. The middle and upper sequences are characterized by the clast provenance, which is primarily from the recycling orogen at the northern edge of the basin and secondarily from the southern uplift. As a result of the two provenances, the strata with apparent changes of heavy mineral assemblage and index better coincides with the interfaces of the secondary strata sequences, which reflects the denudation history and the filling process of the orogen at the northern edge of the basin.

  12. Contrasting styles of large-scale displacement of unconsolidated sand: examples from the early Jurassic Navajo Sandstone on the Colorado Plateau, USA

    Science.gov (United States)

    Bryant, Gerald

    2015-04-01

    Large-scale soft-sediment deformation features in the Navajo Sandstone have been a topic of interest for nearly 40 years, ever since they were first explored as a criterion for discriminating between marine and continental processes in the depositional environment. For much of this time, evidence for large-scale sediment displacements was commonly attributed to processes of mass wasting. That is, gravity-driven movements of surficial sand. These slope failures were attributed to the inherent susceptibility of dune sand responding to environmental triggers such as earthquakes, floods, impacts, and the differential loading associated with dune topography. During the last decade, a new wave of research is focusing on the event significance of deformation features in more detail, revealing a broad diversity of large-scale deformation morphologies. This research has led to a better appreciation of subsurface dynamics in the early Jurassic deformation events recorded in the Navajo Sandstone, including the important role of intrastratal sediment flow. This report documents two illustrative examples of large-scale sediment displacements represented in extensive outcrops of the Navajo Sandstone along the Utah/Arizona border. Architectural relationships in these outcrops provide definitive constraints that enable the recognition of a large-scale sediment outflow, at one location, and an equally large-scale subsurface flow at the other. At both sites, evidence for associated processes of liquefaction appear at depths of at least 40 m below the original depositional surface, which is nearly an order of magnitude greater than has commonly been reported from modern settings. The surficial, mass flow feature displays attributes that are consistent with much smaller-scale sediment eruptions (sand volcanoes) that are often documented from modern earthquake zones, including the development of hydraulic pressure from localized, subsurface liquefaction and the subsequent escape of

  13. From Back-arc Drifting to Arc Accretion: the Late Jurassic-Early Cretaceous Evolution of the Guerrero Terrane Recorded by a Major Provenance Change in Sandstones from the Sierra de los Cuarzos, Central Mexico

    Science.gov (United States)

    Palacios Garcia, N. B.; Martini, M.

    2014-12-01

    The Guerrero terrane composed of Middle Jurassic-Early Cretaceous arc assemblages, were drifted from the North American continental mainland during lower Early Cretaceous spreading in the Arperos back arc basin, and subsequently accreted back to the continental margin in the late Aptian. Although the accretion of the Guerrero terrane represents one of the major tectonic processes that shaped the southern North American Pacific margin, the stratigraphic record related to such a regional event was not yet recognized in central Mexico. Due to the Sierra de los Cuarzos is located just 50 km east of the Guerrero terrane suture belt, its stratigraphic record should be highly sensitive to first order tectonic changes and would record a syn-tectonic deposits related to this major event. In that study area, were identified two main Upper Jurassic-Lower Cretaceous clastic units. The Sierra de los Cuarzos formation represents the lowermost exposed stratigraphic record. Sedimentary structures, sandstones composition, and U-Pb detrital zircon ages document that the Sierra de los Cuarzos formation reflects a vigorous mass wasting along the margin of the North American continental mainland, representing the eastern side of the Arperos back arc basin. Sandstones of the Sierra de los Cuarzos formation are free from detrital contributions related to the Guerrero terrane juvenile sources, indicating that the Arperos Basin acted like an efficient sedimentological barrier that inhibited the influence of the arc massifs on the continental mainland deposits. The Sierra de los Cuarzos formation is overlain by submarine slope deposits of the Pelones formation, which mark a sudden change in the depositional conditions. Provenance analysis documents that sandstones from the Pelones formation were fed by the mafic to intermediate arc assemblages of the Guerrero terrane, as well as by quartz-rich sources of the continental mainland, suggesting that, by the time of deposition of the Pelones

  14. Petrography and geochemistry of Jurassic sandstones from the Jhuran Formation of Jara dome, Kachchh basin, India: Implications for provenance and tectonic setting

    Indian Academy of Sciences (India)

    V Periasamy; M Venkateshwarlu

    2017-04-01

    Sandstones of Jhuran Formation from Jara dome, western Kachchh, Gujarat, India were studied for major, trace and rare earth element (REE) geochemistry to deduce their paleo-weathering, tectonic setting, source rock characteristics and provenance. Petrographic analysis shows that sandstones are having quartz grains with minor amount of K-feldspar and lithic fragments in the modal ratio of Q89:F7:L4. On the basis of geochemical results, sandstones are classified into arkose, sub-litharenite, wacke and quartz arenite. The corrected CIA values indicate that the weathering at source region was moderate to intense. The distribution of major and REE elements in the samples normalized to upper continental crust (UCC) and chondrite values indicate similar pattern of UCC. The tectonic discrimination diagram based on the elemental concentrations and elemental ratios of Fe2O3+MgO vs. TiO2, SiO2 vs. log(K2O/Na2O), Sc/Cr vs. La/Y, Th–Sc–Zr/10, La–Th–Sc plots Jhuran Formation samples in continental rift and collision settings. The plots of Ni against TiO2, La/Sc vs. Th/Co and V–Ni–Th∗10 reveals that the sediments of Jhuran Formation were derived from felsic rock sources. Additionally, the diagram of (Gd/Yb)N against Eu/Eu∗ suggest the post-Archean provenance as source possibly Nagar Parkar complex for the studied samples.

  15. The Jurassic of Denmark and Greenland: The Jurassic of Skåne, southern Sweden

    Directory of Open Access Journals (Sweden)

    Sivhed, Ulf

    2003-10-01

    Full Text Available In Sweden, Jurassic strata are restricted to Skåne and adjacent offshore areas. Jurassic sedimentary rocks predominantly comprise sandy to muddy siliciclastics, with subordinate coal beds andfew carbonate-rich beds. During Mesozoic times, block-faulting took place in the Sorgenfrei–Tornquist Zone, a tectonic zone which transects Skåne in a NW–SE direction. The Jurassic depositionalenvironments in Skåne were thus strongly influenced by uplift and downfaulting, and to some extent by volcanism. Consequently, the sedimentary record reveals evidence of numerous transgressions, regressions and breaks in sedimentation. Relative sea-level changes played a significant role in controlling the facies distribution, as deposition mainly took place in coastal plain to shallow shelf environments.The alluvial deposits in Skåne include floodplain palaeosols, autochthonous coals, overbank sandstones, and stream channel pebbly sandstones. Restricted marine strata comprise intertidalheteroliths with mixed freshwater and marine trace fossil assemblages, and intertidal delta distributary channel sandstones. Shallow marine sediments encompass subtidal and shoreface sandstoneswith herringbone structures, and bioturbated mudstones with tempestite sandstones. Offshore deposits typically comprise extensively bioturbated muddy sandstones.Floral remains, palaeopedology, clay mineralogy and arenite maturity indicate a warm and humid climate in Skåne throughout the Jurassic, possibly with slightly increasing aridity towards the end of the period. Most Jurassic strata in Skåne have been subjected to mild burial diagenesis, and the petroleum generative window has rarely been reached.

  16. Análisis petrográfico de las areniscas jurásicas tempranas en el depocentro Atuel de la cuenca neuquina Petrographic analyses of the early Jurassic sandstones at the Atuel depocenter, Neuquén basin

    Directory of Open Access Journals (Sweden)

    Maisa A. TUNIK

    2008-12-01

    Full Text Available El depocentro Atuel es un hemigraben de rumbo NNO y polaridad al oeste, que fue rellenado durante el Triásico Tardío - Jurásico Temprano, ubicado en el norte de la cuenca Neuquina. El relleno de este hemigraben corresponde a las sedimentitas marinas y continentales de las formaciones Arroyo Malo, El Freno, Puesto Araya y Tres Esquinas. La caracterización petrográfica de las areniscas que conforman dichas unidades permitió discriminar tres petrofacies y analizar sus áreas de procedencia. La petrofacies A (Q 25 ± 3, F 27 ± 7, L 48 ± 7, coincide con el desarrollo de la Formación Arroyo Malo y el marco tectónico del área de procedencia analizada a partir de los gráficos de Dickinson et al. (1983, es de arco transicional. La petrofacies B, incluye a las formaciones El Freno (Q 39 ± 12, F 32 ± 8, L 29 ± 9 y Puesto Araya en su sección inferior (Q 36± 9, F 28 ± 10, L 37 ± 10 y tienen una procedencia de un arco volcánico transicional a disectado. La petrofacies C, correspondiente a la Formación Puesto Araya en su sección superior (Q 48 ± 3, F 23 ± 14, L 29 ± 12, presentan una procedencia de un arco disectado a orógeno reciclado. Finalmente, se incluye una muestra correspondiente a la Formación Tres Esquinas (Q 15 F 49 L 36 cuya composición es muy diferente a las anteriores, ya que está caracterizada por el bajo porcentaje de cuarzo y la presencia de trizas de caída directa; la procedencia de esta muestra es de arco volcánico. La caracterización de las petrofacies A, B y C, permitió en forma preliminar, identificar sus áreas de aporte y apoyar la coetaneidad entre las formaciones El Freno y Puesto Araya inferior, tal como lo propusieron estudios sedimentológicos, estratigráficos y estructurales previos.The Atuel depocenter is a NNO trending hemigraben with west polarity filled during the Late Triassic - Early Jurassic. It is located on the northern are of the Neuquén basin. The hemigraben infill is made of marine and

  17. Toxigenic penicillia spoiling frozen chicken nuggets

    DEFF Research Database (Denmark)

    Wigmann, Evelin Francine; Saccomori, Fernanda; Bernardi, Angelica Olivier

    2015-01-01

    Frozen chicken nuggets are classified as pre-prepared frozen meals. These products are convenient to consumers as they are easy to prepare and allow for long storage by freezing. Over the years, spoilage of frozen food products caused by fungi has been a continual problem for the food industry si...... reserved....

  18. Compactional deformation bands in Wingate Sandstone; additional evidence of an impact origin for Upheaval Dome, Utah

    Science.gov (United States)

    Okubo, Chris H.; Schultz, Richard A.

    2007-04-01

    Field and microstructural observations from Upheaval Dome, in Canyonlands National Park, Utah, show that inelastic strain of the Wingate Sandstone is localized along compactional deformation bands. These bands are tabular discontinuities (Jurassic) age for this impact.

  19. Putative ancient microorganisms from amber nuggets.

    Science.gov (United States)

    Veiga-Crespo, Patricia; Blasco, Lucía; Poza, Margarita; Villa, Tomás G

    2007-06-01

    Evolutionary microbiology studies based on the isolation of ancient DNA and/or microbial samples are scarce due to the difficulty of finding well preserved biological specimens. However, amber is a fossil resin with natural preserving properties for microbial cells and DNA. The visualization by transmission electron microscopy of different microorganism-like specimens found in amber nuggets from both the Miocene and the Cretaceous periods was accompanied by studies of ancient DNA obtained from the nuggets. After the design of specific primers based on the present sequences of both genes in Saccharomyces cerevisiae, the ancestral AGP2 sequence from the Miocene, as well as the 18S rRNA from the Cretaceous, were amplified.

  20. Sandstone petrofacies in the northwestern sector of the Iberian Basin

    OpenAIRE

    Arribas, J.; Ochoa, M; R Mas; Arribas, Mª E.; González-Acebrón, L.

    2007-01-01

    [EN] During the most active rifting stages in the northwestern sector of the Iberian Basin (Cameros Basin and Aragonese Branch of the Iberian Range), thick sequences of continental clastic deposits were generated. Sandstone records from Rift cycle 1 (Permo-Triassic) and Rift cycle 2 (Late Jurassic-Early Cretaceous) show similarities in composition. Based on the most recent data, this paper describes sandstone petrofacies developed during both rifting periods. Six petrofacies can be d...

  1. Sandstone petrofacies in the northwestern sector of the Iberian Basin

    OpenAIRE

    Arribas Mocoroa, José; Ochoa, M; Mas Mayoral, José Ramón; Arribas Mocoroa, María Eugenia; González-Acebrón, L.

    2007-01-01

    During the most active rifting stages in the northwestern sector of the Iberian Basin (Cameros Basin and Aragonese Branch of the Iberian Range), thick sequences of continental clastic deposits were generated. Sandstone records from Rift cycle 1 (Permo-Triassic) and Rift cycle 2 (Late Jurassic-Early Cretaceous) show similarities in composition. Based on the most recent data, this paper describes sandstone petrofacies developed during both rifting periods. Six petrofacies can be distinguishe...

  2. Key Elements Controlling Oil Accumulation within the Tight Sandstones

    Institute of Scientific and Technical Information of China (English)

    Haiyan Hu; Zhiping Zeng; Jianzhang Liu

    2015-01-01

    Tight oil sandstone reservoirs with low porosity and permeability, which are an uncon-ventional petroleum resource, have been discovered in the Jurassic intervals of the central Junggar Ba-sin, the northwestern China. To reveal the accumulation mechanism, a relatively comprehensive re-search was conducted, including oil-source correlation, porosity evolution, and hydrocarbon charging history. The results show that crude oil of these tight sandstone reservoirs were mainly from Permian source rocks with some contribution from Jurassic source rocks. The reservoirs were buried at shallow depth (5%). In contrast, the sandstone reservoir had already become tight and did not provide available space to ac-cumulate oil due to severe compaction and cementation when hydrocarbon from Jurassic source rock filled, evidenced by low GOI values (<5%). Therefore, reservoir porosity controls the oil accumulation within tight sandstone. Whether tight sandstone reservoirs accumulate oil depends on the reservoir quality when hydrocarbons charge. Before the exploration of tight oil sandstone reservoirs, it should be required to investigate the relationship between oil charging history and porosity evolution to reduce the exploration risk and figure out the available targets.

  3. Wet Disc Contraction to Galactic Blue Nuggets and Quenching to Red Nuggets

    CERN Document Server

    Dekel, Avishai

    2013-01-01

    We study the origin of high-z, compact, quenched spheroids (red nuggets) through the dissipative shrinkage of gas-rich disc galaxies into compact star-forming systems (blue nuggets). The discs, intensely fed by cold streams, undergo violent disc instability (VDI) that drives gas into the centre (in parallel with mergers). The inflow is dissipative when the timescale for inflow is shorter than the timescale for star formation. This implies a threshold of ~0.28 in the cold-to-total mass ratio within the disc radius. For the typical cold-to-baryonic mass ratio ~0.5 at z=2, this threshold can be traced back to a maximum spin parameter of ~0.05. It implies that about half the star-forming galaxies contract to blue nuggets, while the rest form extended stellar discs. Blue nuggets are expected to be much less abundant at low redshifts when the gas fraction is lower. The star-forming galaxies at high z are expected to show a corresponding bimodality in stellar surface density about a critical value ~10^9 Msun/kpc^2, ...

  4. Diagenetic effect on permeabilities of geothermal sandstone reservoirs

    DEFF Research Database (Denmark)

    Weibel, Rikke; Olivarius, Mette; Kristensen, Lars

    The Danish subsurface contains abundant sedimentary deposits, which can be utilized for geothermal heating. The Upper Triassic – Lower Jurassic continental-marine sandstones of the Gassum Formation has been utilised as a geothermal reservoir for the Thisted Geothermal Plant since 1984 extracting ...

  5. Fault features and enrichment laws of narrow-channel distal tight sandstone gas reservoirs: A case study of the Jurassic Shaximiao Fm gas reservoir in the Zhongjiang Gas Field, Sichuan Basin

    Directory of Open Access Journals (Sweden)

    Zhongping Li

    2016-11-01

    Full Text Available The Jurassic Shaximiao Fm gas reservoir in the Zhongjiang Gas Field, Sichuan Basin, is the main base of Sinopec Southwest Oil & Gas Company for gas reserves and production increase during the 12th Five-Year Plan. However, its natural gas exploration and development process was restricted severely, since the exploration wells cannot be deployed effectively in this area based on the previous gas accumulation and enrichment pattern of “hydrocarbon source fault + channel sand body + local structure”. In this paper, the regional fault features and the gas accumulation and enrichment laws were discussed by analyzing the factors like fault evolution, fault elements, fault-sand body configuration (the configuration relationship between hydrocarbon source faults and channel sand bodies, trap types, and reservoir anatomy. It is concluded that the accumulation and enrichment of the Shaximiao Fm gas reservoir in this area is controlled by three factors, i.e., hydrocarbon source, sedimentary facies and structural position. It follows the accumulation laws of source controlling region, facies controlling zone and position controlling reservoir, which means deep source and shallow accumulation, fault-sand body conductivity, multiphase channel, differential accumulation, adjusted enrichment and gas enrichment at sweet spots. A good configuration relationship between hydrocarbon source faults and channel sand bodies is the basic condition for the formation of gas reservoirs. Natural gas accumulated preferentially in the structures or positions with good fault-sand body configuration. Gas reservoirs can also be formed in the monoclinal structures which were formed after the late structural adjustment. In the zones supported by multiple faults or near the crush zones, no gas accumulation occurs, but water is dominantly produced. The gas-bearing potential is low in the area with undeveloped faults or being 30 km away from the hydrocarbon source faults. So

  6. Origin of gray-green sandstone in ore bed of sandstone type uranium deposit in north Ordos Basin

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Dongsheng sandstone-type uranium deposit is located in the northern part of Ordos Basin, occurring in the transitional zones between gray-green and gray sandstones of Jurassic Zhiluo Formation. Sandstones in oxidized zone of the ore bed look gray-green, being of unique signature and different from one of ordinary inter-layered oxidation zone of sandstone-type uranium deposits. The character and origin of gray-green sandstones are systematically studied through their petrology, mineralogy and geochemistry. It is pointed out that this color of sandstones is originated from secondary oil-gas reduction processes after paleo-oxidation, being due to acicular-leaf chlorite covering surfaces of the sandstone grains. To find out the origin of gray-green sandstone and recognize paleo-oxidation zones in the ore bed are of not only theoretical significance for understanding metallogenesis of this kind of sandstone-type uranium deposit, but also very importantly practical significance for prospecting for similar kind of sandstone-type uranium deposit.

  7. Quality and Acceptability of Meat Nuggets with Fresh Gel

    Directory of Open Access Journals (Sweden)

    V. Rajkumar

    2016-05-01

    Full Text Available Aloe vera has been used worldwide for pharmaceutical, food, and cosmetic industries due to its wide biological activities. However, quality improvement of low fat meat products and their acceptability with added Aloe vera gel (AVG is scanty. The aim of this study was to explore the feasibility of using fresh AVG on physicochemical, textural, sensory and nutritive qualities of goat meat nuggets. The products were prepared with 0%, 2.5%, and 5% fresh AVG replacing goat meat and were analyzed for proximate composition, physicochemical and textural properties, fatty acid profile and sensory parameters. Changes in lipid oxidation and microbial growth of nuggets were also evaluated over 9 days of refrigerated storage. The results showed that AVG significantly (p<0.05 decreased the pH value and protein content of meat emulsion and nuggets. Product yield was affected at 5% level of gel. Addition of AVG in the formulation significantly affected the values of texture profile analysis. The AVG reduced the lipid oxidation and microbial growth in nuggets during storage. Sensory panelists preferred nuggets with 2.5% AVG over nuggets with 5% AVG. Therefore, AVG up to 2.5% level could be used for quality improvement in goat meat nuggets without affecting its sensorial, textural and nutritive values.

  8. Refractory metal nuggets in different types of cosmic spherules.

    Digital Repository Service at National Institute of Oceanography (India)

    Rudraswami, N.G.; ShyamPrasad, M; Plane, J.M; Berg, T.; Feng, W.; Balgar, S.

    from 23 I-, 21 S- and 5 G-type cosmic spherules, respectively. The nuggets in all the three spherule types follow a pattern indicative of their formation by metal segregation during atmospheric entry due to heating and oxidation, however...

  9. Jurassic Amber in Lebanon

    Institute of Scientific and Technical Information of China (English)

    Dany AZAR; Raymond G(E)ZE; Antoine EL-SAMRANI; Jacqueline MAALOULY; André NEL

    2010-01-01

    Reports of amber predating the Lower Cretaceous are unusual and scarce; they mostly refer to amber pieces of millimetric dimension.In the present study,we report the discovery of 10 new outcrops of Jurassic amber in Lebanon.Some of these had large centimetric-sized pieces of amber.The new localities are described,amber is characterized,and its infrared spectra given.Although the new Jurassic amber yielded to date no more than fungal inclusions,this material is significant and promising.The discovery of several Jurassic outcrops provides crucial information on the prevailing paleoenvironment of that time.

  10. Assessment of Nugget Size of Spot Weld using Neutron Radiography

    Directory of Open Access Journals (Sweden)

    Triyono

    2011-08-01

    Full Text Available Resistance spot welding (RSW has been widely used for many years in the fabrication of car body structures, mainly due to the cost and time considerations. The weld quality as well as the nugget size is an issue in various manufacturing and processes due to the strong link between the weld quality and safety. It has led to the development of various destructive and non-destructive tests for spot welding such as peel testing, ultrasonic inspections, digital shearography, and infrared thermography. However, such methods cannot show spot weld nugget visually and the results are very operator’s skill dependent. The present work proposes a method to visualize the nugget size of spot welds using neutron radiography. Water, oil and various concentrations of gadolinium oxide-alcohol mixture were evaluated as a contrast media to obtain the best quality of radiography. Results show that mixture of 5 g gadolinium oxide (Gd2O3 in 25 ml alcohol produces the best contrast. It provides the possibility to visualize the shape and size of the nugget spot weld. Furthermore, it can discriminate between nugget and corona bond. The result of neutron radiography evaluation shows reasonable agreement with that of destructive test.

  11. Evolution of pore space in sandstones in relation to diagenesis

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, G.

    1982-01-01

    Results are described from studying the collector properties of a bed of sandstones of Yan-10 at the oil field Malin of the Ordosskiy oil and gas basin. The bed is represented by ancient river sandstones of the Jurassic age occurring on eroded surface of the Triassic deposits (Yangan series) and covered with bed of coal deposits Yan-9. The following conclusions were drawn from the results of the studies. Evolution of the pore space actually is the process of gradual substitution of the primary pores by secondary; in this case decrease in porosity in the quartz sandstones occurs mainly because of depositing in the pores of authigenic minerals, and in the sandstones whose grains consist of minerals with lower mechanical strength, because of packing. Secondary porosity develops because of dissolving and kaolinization in the sandstones with high content of feldspars. This process is possibly associated with decarboxilation of organic matter of interlayers of coal and calcareous shales under the influence of increased temperature in the submersion process. Since it has been established that considerable influence on porosity comes from the mineralogical position of the sandstones controlled by the sources of formation, in order to reveal the zones for development of primary and secondary porosity, it is very important to reveal the sources of removal of detrital rocks. A study was also made of the influence of diagenesis on uniformity and texture of the sandstones (by the methods of curves of capillary pressure).

  12. Jurassic fishes of Gondwana

    Directory of Open Access Journals (Sweden)

    Adriana López-Arbarello

    2008-12-01

    Full Text Available The Jurassic is an important period for understanding the origin of modern fish faunas, since it saw the first radiation - and in some cases the origin - of most modern groups. In chondrichthyans, neoselachian sharks and rays diversified during this time. In actinopterygians, the neopterygians, and among them the teleosts, experienced an important radiation, which led to the appearance of several of the modern teleosts groups. In the sarcopterygians, dipnoans and actinistians approached their current forms. However, the Jurassic fossil record of fishes is strongly biased towards the Northern Hemisphere. The only notable Early Jurassic fish fauna from Gondwana is that of the Kota Formation of India. For the Middle Jurassic, the most important Gondwanan fish faunas are those of the Aalenian-Bathonian Stanleyville Beds of the Democratic Republic of Congo, in which a distinct freshwater and a marine fauna are found. In the Late Jurassic, the Gondwanan record is slightly better, with important marine faunas being known from the Oxfordian Quebrada del Profeta in Chile and the Tithonian Vaca Muerta Formation of Argentina. Freshwater faunas have been described from the Tithonian Talbragar Beds of eastern Australia and the Tithonian Cañadón Calcáreo Formation of Argentina. The taxonomic composition of the known marine actinopterygian faunas of Gondwana is in general agreement with faunas of the Northern Hemisphere. However, the Jurassic fish record from Gondwana is highly incomplete both stratigraphically and geographically, and most faunas are in need of revision, further hampering an interpretation of Jurassic fish evolution in the Southern Hemisphere.

  13. High energy cosmic ray signature of quark nuggets

    Science.gov (United States)

    Audouze, J.; Schaeffer, R.; Silk, J.

    1985-01-01

    It has been recently proposed that dark matter in the Universe might consist of nuggets of quarks which populate the nuclear desert between nucleons and neutron star matter. It is further suggested that the Centauro events which could be the signature of particles with atomic mass A approx. 100 and energy E approx. 10 to 15th power eV might also be related to debris produced in the encounter of two neutron stars. A further consequence of the former proposal is examined, and it is shown that the production of relativistic quark nuggets is accompanied by a substantial flux of potentially observable high energy neutrinos.

  14. Kaolinite Mobilisation in Sandstone

    DEFF Research Database (Denmark)

    Rosenbrand, Esther; Fabricius, Ida Lykke; Kets, Frans

    2013-01-01

    The effect of temperature and salinity on sandstone permeability is critical to the feasibility of heat storage in geothermal aquifers. Permeability reduction has been observed in Berea sandstone when the salinity of the pore water is reduced as well as when the sample is heated. Several authors...

  15. Deformation of Aztec Sandstone at Valley of Fire of Nevada: failure modes, sequence of deformation, structural products and their interplay with paleo fluids

    Science.gov (United States)

    Aydin, A.

    2014-12-01

    The Valley of Fire State Park, 60 km NE of Las Vegas, is a beacon of knowledge for deformation of Aztec Sandstone, a cross-bedded quartz arenite deposited in the Aztec-Navajo-Nugget erg in early Jurassic. It displays great diversity of physical properties, different localization types and micromechanics. The two deformation episodes, the Sevier folding & thrusting and the Basin & Range extension affected the area. The appearance of compaction bands marks the earliest deformation structure and their distribution, orientation, and dimension are controlled by the depositional architecture and loading. The earliest shear structures in the area are the Muddy Mountain, Summit, and Willow Tank thrusts and numerous small-scale bed-parallel faults. They altogether produced several kilometers of E-SE transport and shortening in the late Cretaceous and display numerous shear bands in its damage zone within the Aztec Sandstone. Shear bands also occur along dune boundaries and cross-bed interfaces. These observations indicate that the early deformation of the sandstone was accommodated by strain localization with various kinematics. The younger generation of faults in the area is of mid-Miocene age, and crops out pervasively. It includes a series of small offset normal faults (less than a few ten meters) which can be identified at steep cliff faces. These faults are highly segmented and are surrounded by a dense population of splay fractures. A large number of these splays were later sheared sequentially resulting in a well-defined network of left- and right-lateral strike-slip faults with slip magnitudes up to a few kilometers in the Park. The formation mechanisms of both the normal and strike-slip faults can be characterized as the sliding along planes of initial weaknesses and the accompanying cataclastic deformation. Some of the initial weak planes are associated with the depositional elements such as interdune boundaries and cross-bed interfaces while others are joint

  16. Beyond WIMPs: the Quark (Anti) Nugget Dark Matter

    CERN Document Server

    Zhitnitsky, Ariel

    2016-01-01

    We review a testable dark matter (DM) model outside of the standard WIMP paradigm. The model is unique in a sense that the observed ratio $\\Omega_{\\rm dark} \\simeq \\Omega_{\\rm visible}$ for visible and dark matter densities finds its natural explanation as a result of their common QCD origin when both types of matter (DM and visible) are formed during the QCD transition and both are proportional to single dimensional parameter of the system, $\\Lambda_{\\rm QCD}$. We argue that the charge separation effect also inevitably occurs during the same QCD transition in the presence of the $\\cal{CP}$ odd axion field $a(x)$. It leads to preferential formation of one species of nuggets on the scales of the visible Universe where the axion field $a(x)$ is coherent. A natural outcome of this preferential evolution is that only one type of the visible baryons (not anti- baryons) remain in the system after the nuggets complete their formation. Unlike conventional WIMP dark matter candidates, the nuggets and anti-nuggets are ...

  17. Induced electromagnetic stirring behavior in a resistance spot weld nugget

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    A multi-physics hybrid numerical model,which couples electric,magnetic,thermal and flow fields,was used to investigate electromagnetic stirring behavior in a resistance spot weld nugget.The differences of two kinds of different excitation inputs,i.e.,a sinusoidal current and its root-mean-square(RMS) value,were studied to examine if they could produce equivalent electromagnetic stirring effects in the weld nugget.Research showed that the two types of current inputs could produce almost identical fluid flow and heat transfer patterns and consistent evolution of flow and thermal fields in the nugget.At the end of the welding cycles,the maximum flow velocity and temperature between the two inputs differed by 11.6% and 0.3%,respectively.Therefore,the RMS current can be assumed to produce an approximately equivalent electromagnetic stirring effect with the sinusoidal current,and can be used in the future research to greatly improve the solution efficiency of the electromagnetic stirring behavior in the resistance spot weld nugget.

  18. QUALITY AND SHELF LIFE EVALUATION OF NUGGETS PREPARED FROM SPENT DUCK AND SPENT HEN MEAT

    Directory of Open Access Journals (Sweden)

    Rajesh Kumar

    2015-12-01

    Full Text Available A study was conducted to compare the quality of nuggets prepared from spent hen and duck meat. The cooked nuggets were analyzed for pH, thiobarbituric acid (TBA, tyrosine value (TV, moisture, fat, protein, total plate count (TPC and sensory evaluations. Nuggets prepared from spent hen meat showed significantly higher (p<0.05 moisture content however pH, fat and protein content were significantly higher (p<0.05 in duck nuggets. TBA values, TVs and (TPC were highest in duck nuggets but were within the acceptable level up to 7th day of refrigerated storage (4±1°C in both types of nuggets. Both nuggets maintain their sensory quality up to 7th day of refrigeration storage but spent hen nuggets were preferred by consumers compared to nuggets prepared from spent duck meat. Result of the study indicated that, despite the comparative differences among these nuggets, spent duck and hen meat could be used for preparation of nutritionally rich and acceptable nuggets.

  19. Diagenetic effect on permeabilities of geothermal sandstone reservoirs

    DEFF Research Database (Denmark)

    Weibel, Rikke; Olivarius, Mette; Kristensen, Lars

    The Danish subsurface contains abundant sedimentary deposits, which can be utilized for geothermal heating. The Upper Triassic – Lower Jurassic continental-marine sandstones of the Gassum Formation has been utilised as a geothermal reservoir for the Thisted Geothermal Plant since 1984 extracting...... and permeability is caused by increased diagenetic changes of the sandstones due to increased burial depth and temperatures. Therefore, the highest water temperatures typically correspond with the lowest porosities and permeabilities. Especially the permeability is crucial for the performance of the geothermal......-line fractures. Continuous thin chlorite coatings results in less porosity- and permeability-reduction with burial than the general reduction with burial, unless carbonate cemented. Therefore, localities of sandstones characterized by these continuous chlorite coatings may represent fine geothermal reservoirs...

  20. Beyond WIMPs: the Quark (Anti Nugget Dark Matter

    Directory of Open Access Journals (Sweden)

    Zhitnitsky Ariel

    2017-01-01

    Full Text Available We review a testable dark matter (DM model outside of the standard WIMP paradigm. The model is unique in a sense that the observed ratio Ωdark ≃ Ωvisible for visible and dark matter densities finds its natural explanation as a result of their common QCD origin when both types of matter (DM and visible are formed during the QCD phase transition and both are proportional to single dimensional parameter of the system, Λqcd. We argue that the charge separation effect also inevitably occurs during the same QCD phase transition in the presence of the CP odd axion field a(x. It leads to preferential formation of one species of nuggets on the scales of the visible Universe where the axion field a(x is coherent. A natural outcome of this preferential evolution is that only one type of the visible baryons (not anti- baryons remain in the system after the nuggets complete their formation. Unlike conventional WIMP dark matter candidates, the nuggets and anti-nuggets are strongly interacting but macroscopically large objects. The rare events of annihilation of the anti-nuggets with visible matter lead to a number of observable effects. We argue that the relative intensities for a number of measured excesses of emission from the centre of galaxy (covering more than 11 orders of magnitude are determined by standard and well established physics. At the same time the absolute intensity of emission is determined by a single new fundamental parameter of the theory, the axion mass, 10−6eV ≲ ma ≲ 10−3eV. Finally, we comment on implications of these studies for the axion search experiments, including microwave cavity and the Orpheus experiments.

  1. Exploring Jurassic Park.

    Science.gov (United States)

    Simmons, Patricia E.; Wiley, Clyde

    1993-01-01

    Describes several student-tested activities built around "Jurassic Park." The activities feature students engaged in role-playing scenarios, investigative research projects, journal writing and communications skills activities, cooperative learning groups, and learning experiences that make use of reading skills and mathematical knowledge. (PR)

  2. Exploring Jurassic Park.

    Science.gov (United States)

    Simmons, Patricia E.; Wiley, Clyde

    1993-01-01

    Describes several student-tested activities built around "Jurassic Park." The activities feature students engaged in role-playing scenarios, investigative research projects, journal writing and communications skills activities, cooperative learning groups, and learning experiences that make use of reading skills and mathematical knowledge. (PR)

  3. The Jurassic of Denmark and Greenland: Shallow marine syn-rift sedimentation: Middle Jurassic Pelion Formation, Jameson Land, East Greenland

    Directory of Open Access Journals (Sweden)

    Engkilde, Michael

    2003-10-01

    Full Text Available The Middle Jurassic Pelion Formation – Fossilbjerget Formation couplet of Jameson Land, East Greenland, is a well-exposed example of the Middle Jurassic inshore–offshore successions characteristicof the rifted seaways in the Northwest European – North Atlantic region. Early Jurassic deposition took place under relatively quiet tectonic conditions following Late Permian – earliest Triassic and Early Triassic rift phases and the Lower Jurassic stratal package shows an overall layer-cake geometry. A long-term extensional phase was initiated in Middle Jurassic (Late Bajocian time, culminated in the Late Jurassic (Kimmeridgian–Volgian, and petered out in the earliest Cretaceous (Valanginian. The Upper Bajocian – Middle Callovian early-rift succession comprises shallow marine sandstones of the Pelion Formation and correlative offshore siltstones of theFossilbjerget Formation. Deposition was initiated by southwards progradation of shallow marine sands of the Pelion Formation in the Late Bajocian followed by major backstepping in Bathonian–Callovian times and drowning of the sandy depositional system in the Middle–Late Callovian. Six facies associations are recognised in the Pelion–Fossilbjerget couplet, representing estuarine, shoreface, offshore transition zone and offshore environments. The north–southtrendingaxis of the Jameson Land Basin had a low inclination, and deposition was sensitive to even small changes in relative sea level which caused the shorelines to advance or retreat over tens to several hundreds of kilometres. Eight composite sequences, termed P1–P8, are recognised and are subdivided into a total of 28 depositional sequences. The duration of the two orders of sequences was about 1–2 Ma and 360,000 years, respectively. The Upper Bajocian P1–2 sequencesinclude the most basinally positioned shallow marine sandstones, deposited during major sealevel lowstands. The lowstands were terminated by significant marine

  4. Chapter 2. Assessment of undiscovered conventional oil and gas resources--Upper Jurassic-Lower Cretaceous Cotton Valley group, Jurassic Smackover interior salt basins total petroleum system, in the East Texas basin and Louisiana-Mississippi salt basins provinces.

    Science.gov (United States)

    Dyman, T.S.; Condon, S.M.

    2006-01-01

    The Jurassic Smackover Interior Salt Basins Total Petroleum System is defined for this assessment to include (1) Upper Jurassic Smackover Formation carbonates and calcareous shales and (2) Upper Jurassic and Lower Cretaceous Cotton Valley Group organic-rich shales. The Jurassic Smackover Interior Salt Basins Total Petroleum System includes four conventional Cotton Valley assessment units: Cotton Valley Blanket Sandstone Gas (AU 50490201), Cotton Valley Massive Sandstone Gas (AU 50490202), Cotton Valley Updip Oil and Gas (AU 50490203), and Cotton Valley Hypothetical Updip Oil (AU 50490204). Together, these four assessment units are estimated to contain a mean undiscovered conventional resource of 29.81 million barrels of oil, 605.03 billion cubic feet of gas, and 19.00 million barrels of natural gas liquids. The Cotton Valley Group represents the first major influx of clastic sediment into the ancestral Gulf of Mexico. Major depocenters were located in south-central Mississippi, along the Louisiana-Mississippi border, and in northeast Texas. Reservoir properties and production characteristics were used to identify two Cotton Valley Group sandstone trends across northern Louisiana and east Texas: a high-permeability blanket-sandstone trend and a downdip, low-permeability massive-sandstone trend. Pressure gradients throughout most of both trends are normal, which is characteristic of conventional rather than continuous basin-center gas accumulations. Indications that accumulations in this trend are conventional rather than continuous include (1) gas-water contacts in at least seven fields across the blanket-sandstone trend, (2) relatively high reservoir permeabilities, and (3) high gas-production rates without fracture stimulation. Permeability is sufficiently low in the massive-sandstone trend that gas-water transition zones are vertically extensive and gas-water contacts are poorly defined. The interpreted presence of gas-water contacts within the Cotton Valley

  5. Quark nuggets search using gravitational waves aluminum bar detectors

    Directory of Open Access Journals (Sweden)

    Ronga Francesco

    2016-01-01

    Full Text Available Up to now there is no evidence of supersymmetric WIMPS dark matter. This may suggests to look for more exotic possibilities, for example compact ultra-dense quark nuggets. Nuclearites are an example of compact objects that could be constituent of the dark matter. After a short discussion on nuclearites, the result of a nuclearite search with the gravitational wave bar detectors NAUTILUS and EXPLORER is reported.

  6. Quantum chromodynamics phase transition in the early Universe and quark nuggets

    Indian Academy of Sciences (India)

    Abhijit Bhattacharyya; Shibaji Banerjee; Sanjay K Ghosh; Sibaji Raha; Bikash Sinha; Hiroshi Toki

    2003-05-01

    A first-order quark hadron phase transition in the early Universe may lead to the formation of quark nuggets. The baryon number distribution of these quark nuggets have been calculated and it has been found that there are sizeable number of quark nuggets in the stable sector. The nuggets can clump and form bigger objects in the mass range of 0.0003$M_{\\odot}$ to 0.12$M_{\\odot}$. It has been discussed that these bigger objects can be possible candidates for cold dark matter.

  7. Stochastic reconstruction of sandstones

    Science.gov (United States)

    Manwart; Torquato; Hilfer

    2000-07-01

    A simulated annealing algorithm is employed to generate a stochastic model for a Berea sandstone and a Fontainebleau sandstone, with each a prescribed two-point probability function, lineal-path function, and "pore size" distribution function, respectively. We find that the temperature decrease of the annealing has to be rather quick to yield isotropic and percolating configurations. A comparison of simple morphological quantities indicates good agreement between the reconstructions and the original sandstones. Also, the mean survival time of a random walker in the pore space is reproduced with good accuracy. However, a more detailed investigation by means of local porosity theory shows that there may be significant differences of the geometrical connectivity between the reconstructed and the experimental samples.

  8. Upper Jurassic basin axial turbidites within the Gertrud Graben, Danish Central Graben

    Energy Technology Data Exchange (ETDEWEB)

    Rasmussen, E.S.; Jepsen, A.M.; Maver, K.G.

    1998-10-01

    Fore more than twenty years, the Jurassic succession in the Danish Central Graben has been subject to intense exploration for hydrocarbons. Approximately 43 wildcats have been drilled and most of these tested were structural traps located on footwall crests. The reservoirs encountered were Middle and Upper Jurassic sandstones deposited mainly in near shore depositional environments. Some of these wells penetrated thin turbidites of Late Jurassic to Early Cretaceous age. Within the Gertrud Graben distinct seismic anomalies indicate the presence of basin floor turbidites, which can be correlated to fan fringe turbites encountered in the Jeppe-1, Gwen-2 and Mona-1 wells. Within the Gertrud Graben, seismic anomalies characterized by high amplitude reflections with in an otherwise transparent reflection pattern have been recognized. The zone with high amplitude reflections correlates with thin turbidites with oil shows encountered in the Jeppe-1 well. The turbiditic sandstone succession has a gross thickness of 25 m and a net to gross of 75%, with porosity up to 10%. The presence of oil shows in the thin turbiditic sandstones in the Jeppe-1 well, drilled on a footwall crest, suggests the possibility of thicker sandstones in the basinal areas. The aim of this study is to map the distribution of the seismic anomalies by performing seismic inversion. Seismic inversion is used to derive acoustic impedance as a lithology indicator and to establish a geological model that is a likely prediction of the lithology and architecture of the depositional system. (EG) 2 fig., 17 refs.

  9. Middle Jurassic Topawa group, Baboquivari Mountains, south-central Arizona: Volcanic and sedimentary record of deep basins within the Jurassic magmatic arc

    Science.gov (United States)

    Haxel, G.B.; Wright, J.E.; Riggs, N.R.; Tosdal, R.M.; May, D.J.

    2005-01-01

    Among supracrustal sequences of the Jurassic magmatic arc of the southwestern Cordillera, the Middle Jurassic Topawa Group, Baboquivari Mountains, south-central Arizona, is remarkable for its lithologic diversity and substantial stratigraphic thickness, ???8 km. The Topawa Group comprises four units (in order of decreasing age): (1) Ali Molina Formation-largely pyroclastic rhyolite with interlayered eolian and fluvial arenite, and overlying conglomerate and sandstone; (2) Pitoikam Formation-conglomerate, sedimentary breccia, and sandstone overlain by interbedded silt- stone and sandstone; (3) Mulberry Wash Formation-rhyolite lava flows, flow breccias, and mass-flow breccias, with intercalated intraformational conglomerate, sedimentary breccia, and sandstone, plus sparse within-plate alkali basalt and comendite in the upper part; and (4) Tinaja Spring Porphyry-intrusive rhyolite. The Mulberry Wash alkali basalt and comendite are genetically unrelated to the dominant calcalkaline rhyolite. U-Pb isotopic analyses of zircon from volcanic and intrusive rocks indicate the Topawa Group, despite its considerable thickness, represents only several million years of Middle Jurassic time, between approximately 170 and 165 Ma. Sedimentary rocks of the Topawa Group record mixing of detritus from a minimum of three sources: a dominant local source of porphyritic silicic volcanic and subvolcanic rocks, identical or similar to those of the Topawa Group itself; Meso- proterozoic or Cambrian conglomerates in central or southeast Arizona, which contributed well-rounded, highly durable, polycyclic quartzite pebbles; and eolian sand fields, related to Middle Jurassic ergs that lay to the north of the magmatic arc and are now preserved on the Colorado Plateau. As the Topawa Group evidently represents only a relatively short interval of time, it does not record long-term evolution of the Jurassic magmatic arc, but rather represents a Middle Jurassic "stratigraphic snapshot" of the arc

  10. Simulation of channel sandstone architecture in an incised valley

    Energy Technology Data Exchange (ETDEWEB)

    Frykman, P.; Johannessen, P.; Andsbjerg, J.

    1998-12-31

    The present report describes a geostatistical modelling study that is aimed at reflecting the architecture of the channel sandstones in an incised valley fill. The example used for this study is a part of the Middle Jurassic sandy succession of the Bryne Formation in the Danish central Graben. The succession consists mainly of fluvial sediments in the lower part, overlain by tidal influenced sediments, which again is overlain by shallow marine sediments. The modelling study has been performed on a sequence of incised valley sediments in the upper part of the Bryne Formation overlying fluvial sediments. (au) EFP-96. 19 refs.

  11. VALIDATION OF PCR-RFLP TESTING METHOD TO DETECT PORCINE CONTAMINATION IN CHICKEN NUGGET

    Directory of Open Access Journals (Sweden)

    Tri Joko Raharjo

    2012-12-01

    Full Text Available PCR-RFLP technique to detect porcine contamination in chicken nugget has been developed and validated in this research. Various concentrations of pork were fortified during preparation of the nugget. DNA was then isolated from the nugget followed by PCR employed primers which targeted a 359 bp cytB gene fragment of mitochondrial DNA. For RFLP, the PCR product was digested by means of BamHI and BseDI enzymes. Cutting DNA fragments from nugget containing pork using BseDI enzyme produced DNA fragment with size 228 and 131 bp, while cutting with BamHI enzyme produce DNA fragments with sizes 244 and 115 bp. All of these fragments were not present in RFLP analysis of pork-free nugget. The method shows good specificity and precision and could detect porcine contamination in the nugget up to 5%. The method has been applied to test commercial nugget. Four brand of Halal-labeled commercial nugget as well as four brand of non labeled one gave negative porcine contamination.

  12. Using the Moon as a Strange Quark Nugget Detector

    Science.gov (United States)

    Herrin, Eugene T.; Rosenbaum, Doris C.; Teplitz, Vigdor L.

    2007-11-01

    We review the romance and mystery of strange quark matter (SQM), including: its basics, our recent work on bounds on the abundance of ton-range strange quark nuggets (SQNs) from Earth seismology, potential SQN bounds from a possible seismic search on the Moon, and our recent bounds on SQNs in the 10 kilogram to ton range from the data of Apollo-implanted seismometers. Finally, we speculate a bit on using the sun or the solar system to detect passage of SQNs of much greater mass than the aforementioned.

  13. Using the Moon as a Strange Quark Nugget Detector

    Energy Technology Data Exchange (ETDEWEB)

    Herrin, Eugene T. [Geology Department, Southern Methodist University, Dallas, TX 75275 (United States); Rosenbaum, Doris C. [Physics Department, Southern Methodist University, Dallas, TX 75275 (United States); Teplitz, Vigdor L. [NASA Goddard Space Flight Center, Greenbelt, MD 20771 (United States)

    2007-11-15

    We review the romance and mystery of strange quark matter (SQM), including: its basics, our recent work on bounds on the abundance of ton-range strange quark nuggets (SQNs) from Earth seismology, potential SQN bounds from a possible seismic search on the Moon, and our recent bounds on SQNs in the 10 kilogram to ton range from the data of Apollo-implanted seismometers. Finally, we speculate a bit on using the sun or the solar system to detect passage of SQNs of much greater mass than the aforementioned.

  14. Heterogeneity of the Nugget Microstructure in a Thick 2050 Al Friction-Stirred Weld

    Science.gov (United States)

    Avettand-Fenoel, Marie-Noëlle; Taillard, Roland

    2015-01-01

    The current article deals with 19-mm-thick welds of AA 2050. These joints obtained by friction stir butt welding on half penetration were subsequently strained and artificially aged. The nugget's hardness weakens along the plate thickness from the top surface. This evolution is explained by the modification of the precipitation state, which overcomes the effects of the changes of size and preferred orientation of grains along the nugget's depth. This modification of microstructure arises from the various strains, strain rates, and temperatures encountered in the different areas in the nugget. The postwelding treatment did not manage to suppress either the undermatching of the original nugget compared to the base material or the differences of thermal stabilities at the different depths in the nugget.

  15. Limits on quark nugget dark matter from cosmic ray detectors

    Directory of Open Access Journals (Sweden)

    Lawson Kyle

    2015-01-01

    Full Text Available The purpose of this talk is to highlight the potential role of large scale cosmic ray detectors in constraining the presence of certain classes of high mass dark matter candidates. These models are not easily constrained by conventional dark matter searches due to their very small flux, and thus, alternative detection techniques must be considered. I will begin with a brief review of heavy compact composite dark matter and some motivation for considering this class of models. In particular I will describe a model in which the dark matter consists of heavy “nuggets” of quarks and antiquarks, and highlight its relation to baryogenesis. As this form of dark matter is based in known physics its properties, as established by arguments from nuclear physics and electrodynamics, are strongly constrained. Based on these properties I will give a primarily qualitative description of the nuggets' interaction with visible matter and of the consequences of the passage of a dark matter nugget through the earth's atmosphere. From the general scales and properties of these events I argue that they may be detectable using cosmic ray observatories and that the largest of these observatories are likely to impose the strongest known constraints on this class of dark matter candidates.

  16. Uppermost Jurassic-lower cretaceous radiolarian chert from the Tanimbar Islands (Banda Arc), Indonesia

    Science.gov (United States)

    Jasin, Basir; Haile, Neville

    This paper describes and figures Mesozoic Radiolaria from cherts in Pulau Ungar, Tanimbar Islands, eastern Indonesia. Two assemblages of Radiolaria are recognised. The lower assemblage is indicative of upper Tithonian (uppermost Jurassic) to Berriasian (lowermost Cretaceous) and the upper assemblage is of upper Valanginian to Barremian age. These are the first precise ages obtained from the Ungar Formation, a unit including sandstones with apparently good petroleum reservoir characteristics.

  17. Jurassic Park: Adventure in Learning.

    Science.gov (United States)

    Shams, Marcia; Boteler, Trina

    1993-01-01

    Describes using the movie "Jurassic Park" as a foundation for a middle school interdisciplinary unit involving science, math, language arts, history, and geography. Suggested books and activities are presented. (PR)

  18. Jurassic Park: Adventure in Learning.

    Science.gov (United States)

    Shams, Marcia; Boteler, Trina

    1993-01-01

    Describes using the movie "Jurassic Park" as a foundation for a middle school interdisciplinary unit involving science, math, language arts, history, and geography. Suggested books and activities are presented. (PR)

  19. Quality and Acceptability of Meat Nuggets with Fresh Aloe vera Gel.

    Science.gov (United States)

    Rajkumar, V; Verma, Arun K; Patra, G; Pradhan, S; Biswas, S; Chauhan, P; Das, Arun K

    2016-05-01

    Aloe vera has been used worldwide for pharmaceutical, food, and cosmetic industries due to its wide biological activities. However, quality improvement of low fat meat products and their acceptability with added Aloe vera gel (AVG) is scanty. The aim of this study was to explore the feasibility of using fresh AVG on physicochemical, textural, sensory and nutritive qualities of goat meat nuggets. The products were prepared with 0%, 2.5%, and 5% fresh AVG replacing goat meat and were analyzed for proximate composition, physicochemical and textural properties, fatty acid profile and sensory parameters. Changes in lipid oxidation and microbial growth of nuggets were also evaluated over 9 days of refrigerated storage. The results showed that AVG significantly (p<0.05) decreased the pH value and protein content of meat emulsion and nuggets. Product yield was affected at 5% level of gel. Addition of AVG in the formulation significantly affected the values of texture profile analysis. The AVG reduced the lipid oxidation and microbial growth in nuggets during storage. Sensory panelists preferred nuggets with 2.5% AVG over nuggets with 5% AVG. Therefore, AVG up to 2.5% level could be used for quality improvement in goat meat nuggets without affecting its sensorial, textural and nutritive values.

  20. The Tunisian Jurassic aquifer in the North African Sahara aquifer system: information derived from two-dimensional seismic reflection and well logs

    Science.gov (United States)

    Ben Lasmar, Rafika; Guellala, Rihab; Garrach, Mohamed; Mahroug, Ali; Sarsar Naouali, Benen; Inoubli, Mohamed Hédi

    2017-07-01

    Southern Tunisia is an arid area where socio-economic activities are dependent on groundwater resources. The presented study aims to better characterize the Jurassic aquifer based on geological and geophysical data, with a view to develop a rational exploitation program. Well logs are used to precisely determine the position and composition of the known Jurassic aquifer layers and to identify others able to produce good quality water. The logs show that limestones, sandstones and dolomites of the Krachoua, Techout and Foum Tataouine formations are the main Jurassic aquifers. Sixty-eight seismic-reflection sections are integrated within this study. The interpolation between the interpreted sections leads to the construction of isochronous isopach maps and geoseismic sections, and their analysis finds that compressive and extensive tectonic deformations have influenced the Jurassic aquifer geometry. The Hercynian orogeny phase manifestation is remarkable in that there are several stratigraphic gaps in the Jurassic sequence. The E-W, NW-SE, and NNW-SSE accidents, reactivated in normal faults since the Permian to Lower Cretaceous epochs, have generated the structures found in the Jurassic series, such as subsided and raised blocks. Their syn-sedimentary activity has controlled the thickness and facies of these series. The Cretaceous, Tortonian and Post-Villafranchian compressions are responsible for the Jurassic-deposits folding in some localities. The highlighted tectonic and sedimentary events have an important impact on the Jurassic aquifer function by favoring the Jurassic aquifer interconnections and their connections with the Triassic and Cretaceous permeable series.

  1. Natural and Laboratory-Induced Compaction Bands in Aztec Sandstone

    Science.gov (United States)

    Haimson, B. C.; Lee, H.

    2002-12-01

    The Aztec sandstone used in this research is from the Valley of Fire State Park area, Nevada. This Jurassic aeolian sandstone is extremely weak (uniaxial compressive strength of 1-2 MPa); porosity averages 26%; grains are subrounded and have a bimodal size distribution (0.1 mm and 0.5 mm); its mineral composition (K. Sternlof, personal comm.) is 93% quartz, 5% k-spar, and 2% kaolinite, Fe carbonate and others; grain bonding is primarily through suturing. Sternlof et al. (EOS, November, 2001) observed substantial exposure of mainly compactive deformation bands in the Aztec sandstone. We studied an SEM image of a compaction band found in a hand sample of the Aztec sandstone. We also conducted a drilling test in a 130x130x180 mm prismatic specimen subjected to a preset far-field true triaxial stress condition (\\sigmah = 15 MPa, \\sigmav = 25 MPa, \\sigmaH = 40 MPa). Drilling of a 20 mm dia. vertical hole created a long fracture-like thin tabular breakout along the \\sigmah springline and perpendicular to \\sigmaH direction. SEM analysis of the zones ahead of the breakout tips revealed narrow bands of presumed debonded intact grains interspersed with grain fragments. We infer that the fragments were formed from multiple splitting or crushing of compacted grains in the band of high compressive stress concentration developed along the \\sigmah springline. SEM images away from the breakout tip surroundings showed no such fragments. SEM study of the natural compaction band showed a similar arrangement of mainly intact grains surrounded by grain fragments. Using the Optimas optical software package, we found the percentage of pore area within the band ahead of the breakout tips to average 17%; outside of this zone it was 23%. In the natural compaction band pore area occupied 8.5% of the band; in the host rock adjacent to the compaction band it averaged 19%. These readings strongly suggest porosity reduction due to compaction in both cases. The close resemblance between the

  2. Antiquark nuggets as dark matter: New constraints and detection prospects

    CERN Document Server

    Gorham, Peter W

    2012-01-01

    Current evidence for dark matter in the universe does not exclude heavy composite nuclear-density objects consisting of bound quarks or antiquarks over a significant range of masses. Here we analyze one such proposed scenario, which hypothesizes antiquark nuggets with a range of B ~ 10^{24-30}$ in a color superconducting phase, with specific predictions for spectral emissivity via interactions with normal matter. We find that, if these objects make up the majority of the dark matter density in the solar neighborhood, their radiation efficiency in solids is marginally constrained, due to constraints from the total geothermal energy budget of the Earth. At allowed radiation efficiencies, the number density of such objects can be constrained to well below dark matter densities by existing radio data over a mass range currently not constrained by other methods.

  3. New theropod, thyreophoran, and small sauropod tracks from the Middle Jurassic Bagå Formation, Bornholm, Denmark

    DEFF Research Database (Denmark)

    Milàn, Jesper

    2011-01-01

    Three new dinosaur tracks are described from the Middle Jurassic Bagå Formation of Bornholm, Denmark. The tracks are all preserved as natural casts on the underside of fluvial sandstone blocks originating from the old Hasle Klinkefabrik’s clay pit, now called Pyritsøen. The new tracks are from...... a medium-sized theropod, a thyreophoran, and a small sauropod. Together with a hyreophoran track and large sauropod tracks described in 2005, the Middle Jurassic dinosaur fauna of Bornholm now comprises theropods, two sizes of sauropods and at least one type of thyreophoran dinosaur. This is important...

  4. Penggunaan Bahan Pengisi terhadap Mutu Nugget Vegetarian Berbahan Dasar Tahu dan Tempe

    Directory of Open Access Journals (Sweden)

    Syarifah Rohaya

    2013-02-01

    Full Text Available The purpose of this study was to compare different sources of flours and protein sources based on soya bean products in producing vegetarian nugget. Factorial experimental design with three replications was employed where wheat, sweet potato, sago and banana flour as one factor, and tempeh and tofu as another factor. Moisture and raw protein content of vegetarian nuggets produced in this study was in accordance with the Indonesia Standard (SNI. Moisture was less than 60 percent and raw protein was above 12 percent. The highest organoleptic test was obtained from the nugget made of the combination of sago as filler and tofu as protein source. The nugget contained 60.00, 14.89, 28.89 and 2.00 percent of moisture, raw protein, raw fat and ash content, respectively. The organoleptic scores were 2.70, 3.58, 3.50, 3.53 and 3.62 for color, aroma, taste, texture and springiness, respectively. Keywords: nugget, vegetarian nugget, filler

  5. Antioxidant Efficacy of Litchi (Litchi chinensis Sonn. Pericarp Extract in Sheep Meat Nuggets

    Directory of Open Access Journals (Sweden)

    Arun K. Das

    2016-05-01

    Full Text Available In the present study, the efficacy of litchi fruit pericarp (LFP extract (0.5%, 1.0% and 1.5% concentration in retarding lipid oxidation of cooked sheep meat nuggets was evaluated and compared to butylated hydroxyl toluene (BHT, 100 ppm. The total phenolic content and antioxidant potential of LFP extracts were determined. The thiobarbituric acid reactive substance (TBARS values were evaluated to assess the potential of LFP extracts as natural antioxidants for oxidative stability of cooked nuggets during 12 days of refrigerated storage. Results show that total phenolics content in 10 mg LFP powder was comparable to 100 ppm BHT, but 15 mg LFP powder had significantly higher (p < 0.05 total phenolics content and reducing power than the synthetic antioxidant. LFP extract did not affect pH, cooking yield and the sensory attributes of cooked nuggets. Non-treated control and nuggets with 1.0% LFP extract had significantly lower total phenolics than nuggets with 1.5% extract and BHT. TBARS values were significantly lower (p < 0.05 throughout the storage period in cooked meat nuggets containing either LFP extract or BHT than in non-treated control. Results indicate that LFP extracts are promising sources of natural antioxidants and can potentially be used as functional food additives in meat products at 1.5% without affecting products’ acceptability.

  6. Antioxidant Efficacy of Litchi (Litchi chinensis Sonn.) Pericarp Extract in Sheep Meat Nuggets

    Science.gov (United States)

    Das, Arun K.; Rajkumar, Vincent; Nanda, Pramod K.; Chauhan, Pranav; Pradhan, Soubhagya R.; Biswas, Subhasish

    2016-01-01

    In the present study, the efficacy of litchi fruit pericarp (LFP) extract (0.5%, 1.0% and 1.5% concentration) in retarding lipid oxidation of cooked sheep meat nuggets was evaluated and compared to butylated hydroxyl toluene (BHT, 100 ppm). The total phenolic content and antioxidant potential of LFP extracts were determined. The thiobarbituric acid reactive substance (TBARS) values were evaluated to assess the potential of LFP extracts as natural antioxidants for oxidative stability of cooked nuggets during 12 days of refrigerated storage. Results show that total phenolics content in 10 mg LFP powder was comparable to 100 ppm BHT, but 15 mg LFP powder had significantly higher (p content and reducing power than the synthetic antioxidant. LFP extract did not affect pH, cooking yield and the sensory attributes of cooked nuggets. Non-treated control and nuggets with 1.0% LFP extract had significantly lower total phenolics than nuggets with 1.5% extract and BHT. TBARS values were significantly lower (p cooked meat nuggets containing either LFP extract or BHT than in non-treated control. Results indicate that LFP extracts are promising sources of natural antioxidants and can potentially be used as functional food additives in meat products at 1.5% without affecting products’ acceptability. PMID:27213457

  7. Red nuggets grow inside-out: evidence from gravitational lensing

    CERN Document Server

    Oldham, Lindsay; Fassnacht, Chris; Treu, Tommaso; Brewer, Brendon J; Koopmans, L V E; Lagattuta, David; Marshall, Philip; McKean, John; Vegetti, Simona

    2016-01-01

    We present a new sample of strong gravitational lens systems where both the foreground lenses and background sources are early-type galaxies. Using imaging from HST/ACS and Keck/NIRC2, we model the surface brightness distributions and show that the sources form a distinct population of massive, compact galaxies at redshifts $0.4 \\lesssim z \\lesssim 0.7$, lying systematically below the size-mass relation of the global elliptical galaxy population at those redshifts. These may therefore represent relics of high-redshift red nuggets or their partly-evolved descendants. We exploit the magnifying effect of lensing to investigate the structural properties, stellar masses and stellar populations of these objects with a view to understanding their evolution. We model these objects parametrically and find that they generally require two S\\'ersic components to properly describe their light profiles, with one more spheroidal component alongside a more envelope-like component, which is slightly more extended though still...

  8. Red nuggets grow inside-out: evidence from gravitational lensing

    Science.gov (United States)

    Oldham, Lindsay; Auger, Matthew W.; Fassnacht, Christopher D.; Treu, Tommaso; Brewer, Brendon J.; Koopmans, L. V. E.; Lagattuta, David; Marshall, Philip; McKean, John; Vegetti, Simona

    2017-03-01

    We present a new sample of strong gravitational lens systems where both the foreground lenses and background sources are early-type galaxies. Using imaging from Hubble Space Telescope (HST)/Advanced Camera for Studies (ACS) and Keck/NIRC2, we model the surface brightness distributions and show that the sources form a distinct population of massive, compact galaxies at redshifts 0.4 ≲ z ≲ 0.7, lying systematically below the size-mass relation of the global elliptical galaxy population at those redshifts. These may therefore represent relics of high-redshift red nuggets or their partly evolved descendants. We exploit the magnifying effect of lensing to investigate the structural properties, stellar masses and stellar populations of these objects with a view to understanding their evolution. We model these objects parametrically and find that they generally require two Sérsic components to properly describe their light profiles, with one more spheroidal component alongside a more envelope-like component, which is slightly more extended though still compact. This is consistent with the hypothesis of the inside-out growth of these objects via minor mergers. We also find that the sources can be characterized by red-to-blue colour gradients as a function of radius which are stronger at low redshift - indicative of ongoing accretion - but that their environments generally appear consistent with that of the general elliptical galaxy population, contrary to recent suggestions that these objects are pre-dominantly associated with clusters.

  9. Evaluation of edible polymer coatings enriched with green tea extract on quality of chicken nuggets

    Directory of Open Access Journals (Sweden)

    Prathyusha Kristam

    2016-07-01

    Full Text Available Aim: The present study was conducted to evaluate the physico-chemical and microbiological characteristics of chicken nuggets coated with sodium alginate (SA coatings at refrigerated (4±1°C and frozen (−18±1°C storage condition at regular periodic intervals. Materials and Methods: Chicken meat nuggets were separated into three groups: Uncoated control (C, coated with alginate coating (T1, and coated with alginate coating incorporated with 1% green tea extract (GTE (T2. The nuggets were analyzed at regular intervals of 5days for refrigerated storage and 15 days for frozen storage period in terms of pH, 2-thiobarbituric acid value (TBA, peroxide value (PV, total plate count (TPC, water loss, and sensory characteristics. Results: The results indicated that the nuggets coated with alginate-based coatings effectively reduced the spoilage as indicated by pH, TBA, and PVs. pH values of the formulations ranged from 6.15 to 6.34 at refrigerated storage temperature (4±1°C and 6.49-6.71 at frozen storage temperature (−18±1°C. TBA value of the treatments ranged from 1.28 to 1.54 mg MDA/kg and 1.34 to 1.50 mg MDA/kg under refrigerated and frozen storage temperatures, respectively. Color, flavor, juiciness, tenderness, and overall acceptability of the nuggets differed significantly (p<0.05 with the coated nuggets. The coated nuggets were well acceptable upto 15 days at refrigerated storage temperature (4±1°C and upto 75 days at frozen storage temperature (−18±1°C. Nuggets coated with GTE incorporated coating solution had a lower TBA-reactive substances values, PVs, and TPCs when compared to the nuggets coated with SA and the control group. Conclusion: Study revealed that incorporation of edible coatings with antioxidants, namely, GTE at 1% level had a significant effect in reducing the fat oxidation. The samples recorded a shelf life of 15 days under refrigerated storage when compared to their controls with 10 days of storage period and 75

  10. Detection of magnetized quark-nuggets, a candidate for dark matter.

    Science.gov (United States)

    VanDevender, J Pace; VanDevender, Aaron P; Sloan, T; Swaim, Criss; Wilson, Peter; Schmitt, Robert G; Zakirov, Rinat; Blum, Josh; Cross, James L; McGinley, Niall

    2017-08-18

    Quark nuggets are theoretical objects composed of approximately equal numbers of up, down, and strange quarks and are also called strangelets and nuclearites. They have been proposed as a candidate for dark matter, which constitutes ~85% of the universe's mass and which has been a mystery for decades. Previous efforts to detect quark nuggets assumed that the nuclear-density core interacts directly with the surrounding matter so the stopping power is minimal. Tatsumi found that quark nuggets could well exist as a ferromagnetic liquid with a ~10(12)-T magnetic field. We find that the magnetic field produces a magnetopause with surrounding plasma, as the earth's magnetic field produces a magnetopause with the solar wind, and substantially increases their energy deposition rate in matter. We use the magnetopause model to compute the energy deposition as a function of quark-nugget mass and to analyze testing the quark-nugget hypothesis for dark matter by observations in air, water, and land. We conclude the water option is most promising.

  11. Guava ( L. Powder as an Antioxidant Dietary Fibre in Sheep Meat Nuggets

    Directory of Open Access Journals (Sweden)

    Arun K. Verma

    2013-06-01

    Full Text Available This study was conducted to explore the antioxidant potential and functional value of guava (Psidium guajava L. powder in muscle foods. Guava powder was used as a source of antioxidant dietary fibre in sheep meat nuggets at two different levels i.e., 0.5% (Treatment I and 1.0% (Treatment II and its effect was evaluated against control. Guava powder is rich in dietary fibre (43.21%, phenolics (44.04 mg GAE/g and possesses good radical scavenging activity as well as reducing power. Incorporation of guava powder resulted in significant decrease (p<0.05 in pH of emulsion and nuggets, emulsion stability, cooking yield and moisture content of nuggets while ash and moisture content of emulsion were increased. Total phenolics, total dietary fibre (TDF and ash content significantly increased (p<0.05 in nuggets with added guava powder. Product redness value was significantly improved (p<0.05 due to guava powder. Textural properties did not differ significantly except, springiness and shear force values. Guava powder was found to retard lipid peroxidation of cooked sheep meat nuggets as measured by TBARS number during refrigerated storage. Guava powder did not affect sensory characteristics of the products and can be used as source of antioxidant dietary fibre in meat foods.

  12. Taphonomy and paleoecology inferences of vertebrate ichnofossils from Guará Formation (Upper Jurassic), southern Brazil

    Science.gov (United States)

    Dentzien-Dias, Paula C.; Schultz, Cesar L.; Bertoni-Machado, Cristina

    2008-03-01

    In southern Brazil, the eolian facies of the Guará Formation (Late Jurassic) reveal footprints and trackways of vertebrates (dinosaurs), as well as burrows made by small vertebrates. All the footprints and trackways are preserved in dunes and sand sheets. The footprints made in the sand sheets are not well preserved due to intense trampling and can be distinguished only by the deformation of the sandstone laminations. In some cases it is possible to see this deformation in plan and in section. Tracks of theropods, ornithopods and middle-sized sauropods are present. Two footprints preserved in the foreset of a paleodune permitted recognition of slide structures and identification of the trackmaker, a theropod. Burrows horizontally across the foresets were found at this same paleodune. Ribbons of massive sandstone - interpreted as the partial filling of the base of the burrows - covered by little blocks of stratified sandstone - suggest the collapse of the burrow roof inward. There are no body fossils in the Guará Formation, consequently the preservation of these tracks provides unique evidence of widespread dinosaurs activity in southern Brazil near the end of the Jurassic.

  13. Upper Jurassic to Lower Cretaceous(?) synorogenic sedimentary rocks in the southern Spring Mountains, Nevada

    Science.gov (United States)

    Carr, Michael D.

    1980-08-01

    A newly recognized sequence of Upper Jurassic to Lower Cretaceous(?) terrigenous rocks in the Good-springs district, Nevada, was deposited during the emplacement of the Contact thrust plate. Two facies are recognized: (1) interbedded conglomerate and sandstone derived from Mesozoic igneous and terrigenous platform rocks and (2) interbedded carbonate and sandstone-clast conglomerate, quartz sandstone, and red shale. No igneous detritus occurs in the facies with carbonate-clast conglomerate. Carbonate clasts could only have been derived from the Paleozoic carbonate sequence, which was exposed in the area by latest Jurassic to earliest Cretaceous thrusting. The age of rocks from a volcanic unit within the synorogenic sequence was determined radiometrically to be 150 ± 10 m.y. (K-Ar on biotite). The sequence was deposited disconformably on deeply eroded rocks of the early Mesozoic platform and ultimately overridden from the west by the Contact thrust plate. Information from the sequence corroborates previously reported regional data regarding the timing and nature of the Contact-Red Springs thrust event. *Present address: U.S. Geological Survey, 345 Middlefield Road, Menlo Park, California 94025

  14. Quality characteristics of fried lamb nuggets from low-value meat cuts: Effect of formulation and freezing storage.

    Science.gov (United States)

    Medina, Milagros; Antequera, Teresa; Ruiz, Jorge; Jiménez-Martín, Estefanía; Pérez-Palacios, Trinidad

    2015-10-01

    This study revealed the possibility of manufacturing prefried lamb nuggets from low-value cuts (flank) and evaluated the effect of formulation (50:50 vs. 20:80 of leg/flank cuts) and freezing (-20 ℃ for two months) on different quality parameters. Frying process produced a decrease of water content, an increase in lipid oxidation indicators, and an intense browning of nuggets surface. The use of flank up to a 75% of the total meat in the formula led to higher fat contents and higher polyunsaturated fatty acid proportions in fried nuggets. This made them more prone to get oxidized during the freezing storage and subsequent final frying. Nuggets with a higher proportion of flank also showed lower shear force values. However, nuggets with both formulations showed similar sensory acceptance. Freezing storage of lamb meat nuggets for two months increased the levels of lipid oxidation indicators, but again not to a level high enough to influence the sensory perception by consumers. So that, frozen nuggets from both formulations showed similar consumer acceptance to freshly produced ones with quite good scores (3.46-3.86 out of 5). Thus, low-value lamb cuts are suitable for being processed into highly acceptable prefried frozen lamb nuggets, which constitutes an opportunity for adding value to the whole lamb value chain.

  15. CO2 Storage Potential of the Eocene Tay Sandstone, Central North Sea, UK

    Science.gov (United States)

    Gent, Christopher; Williams, John

    2017-04-01

    Carbon Capture and Storage (CCS) is crucial for low-carbon industry, climate mitigation and a sustainable energy future. The offshore capacity of the UK is substantial and has been estimated at 78 Gt of CO2 in saline aquifers and hydrocarbon fields. The early-mid Eocene Tay Sandstone Member of the Central North Sea (CNS) is a submarine-fan system and potential storage reservoir with a theoretical capacity of 123 Mt of CO2. The Tay Sandstone comprises of 4 sequences, amalgamating into a fan complex 125km long and 40 km at a minimum of 1500 m depth striking NW-SE, hosting several hydrocarbon fields including Gannett A, B, D and Pict. In order to better understand the storage potential and characteristics, the Tay Sandstone over Quadrant 21 has been interpreted using log correlation and 3D seismic. Understanding the internal and external geometry of the sandstone as well as the lateral extent of the unit is essential when considering CO2 vertical and horizontal fluid flow pathways and storage security. 3D seismic mapping of a clear mounded feature has revealed the youngest sequence of the Tay complex; a homogenous sand-rich channel 12 km long, 1.5 km wide and on average 100 m thick. The sandstone has porosity >35%, permeability >5 D and a net to gross of 0.8, giving a total pore volume of 927x106 m3. The remaining three sequences are a series of stacked channels and interbedded mudstones which are more quiescent on the seismic, however, well logs indicate each subsequent sequence reduce in net to gross with age as mud has a greater influence in the early fan system. Nevertheless, the sandstone properties remain relatively consistent and are far more laterally extensive than the youngest sequence. The Tay Sandstone spatially overlaps several other potential storage sites including the older Tertiary sandstones of the Cromarty, Forties and Mey Members and deeper Jurassic reservoirs. This favours the Tay Sandstone to be considered in a secondary or multiple stacked

  16. Antioxidant and antimicrobial effects of kordoi (Averrhoa carambola) fruit juice and bamboo (Bambusa polymorpha) shoot extract in pork nuggets.

    Science.gov (United States)

    Thomas, R; Jebin, N; Saha, R; Sarma, D K

    2016-01-01

    Pork nuggets with 'very good' acceptability was processed by incorporating kordoi (Averrhoa carambola) fruit juice and bamboo (Bambusa polymorpha) shoot extract, and their physical, chemical, microbiological and sensorial characteristics were evaluated during 35 days storage under refrigeration. Addition of kordoi fruit juice (4%) and bamboo shoot extract (6%) had a significant effect on the pH, moisture, protein, fat, fiber, instrumental color values and texture profiles of nuggets. Nuggets with juice and extract had significantly lower TBARS values towards the end of the storage period compared to the control. Microbial and sensory qualities of nuggets were significantly improved by the addition of juice and extract. Incorporation of juice and extract at 4% and 6% levels, respectively, increased the storage life of pork nuggets by at least two weeks, i.e. from 21 days to 35 days at 4 ± 1 °C compared to the control.

  17. Magnetohydrodynamic behaviors in a resistance spot weld nugget under different welding currents

    Institute of Scientific and Technical Information of China (English)

    S.; Jack; HU

    2008-01-01

    Magnetohydrodynamic behaviors in a resistance spot weld nugget under different welding currents are investigated based on a multiphysics coupled numerical model, which incorporates phase change and variable electrical contact resis-tances at faying surface and electrode-workpiece contact surface. The patterns of the flow field and thermal field at the end of the welding phase under different welding currents are obtained. The evolutions of fluid flow and heat transfer during the whole welding process are also revealed systematically. The analysis results are also compared with a traditional electrothermal coupled model to obtain the quantitative effects of the magnetohydrodynamic behaviors on the resistance spot weld nugget formation.

  18. Magnetohydrodynamic behaviors in a resistance spot weld nugget Under different welding currents

    Institute of Scientific and Technical Information of China (English)

    LI YongBing; LIN ZhongQin; S. Jack HU; CHEN GuanLong

    2008-01-01

    Magnetohydrodynamic behaviors in a resistance spot weld nugget under different welding currents are investigated based on a multiphysics coupled numerical model, which incorporates phase change and variable electrical contact resis- tances at faying surface and electrode-workpiece contact surface. The patterns of the flow field and thermal field at the end of the welding phase under different welding currents are obtained. The evolutions of fluid flow and heat transfer during the whole welding process are also revealed systematically. The analysis results are also compared with a traditional electrothermal coupled model to obtain the quantitative effects of the magnetohydrodynamic behaviors on the resistance spot weld nugget formation.

  19. Quality characteristics of fried lamb nuggets from low-value meat cuts

    DEFF Research Database (Denmark)

    Medina, Milagros; Antequera, Teresa; Ruiz Carrascal, Jorge;

    2015-01-01

    This study revealed the possibility of manufacturing prefried lamb nuggets from low-value cuts (flank) and evaluated the effect of formulation (50:50 vs. 20:80 of leg/flank cuts) and freezing (−20 ℃ for two months) on different quality parameters. Frying process produced a decrease of water content...... not to a level high enough to influence the sensory perception by consumers. So that, frozen nuggets from both formulations showed similar consumer acceptance to freshly produced ones with quite good scores (3.46–3.86 out of 5). Thus, low-value lamb cuts are suitable for being processed into highly acceptable...

  20. The Jurassic of Denmark and Greenland: Sedimentology and sequence stratigraphy of the Bryne and Lulu Formations, Middle Jurassic, northern Danish Central Graben

    Directory of Open Access Journals (Sweden)

    Andsbjerg, Jan

    2003-10-01

    Full Text Available The Middle Jurassic Bryne and Lulu Formations of the Søgne Basin (northern part of the Danish Central Graben consist of fluvially-dominated coastal plain deposits, overlain by interfingering shoreface and back-barrier deposits. Laterally continuous, mainly fining-upwards fluvial channel sandstones that locally show evidence for tidal influence dominate the alluvial/coastal plain deposits of the lower Bryne Formation. The sandstones are separated by units of fine-grained floodplain sediments that show a fining-upwards - coarsening-upwards pattern and locally grade into lacustrine mudstones. A regional unconformity that separates the lower Bryne Formation from the mainly estuarine upper Bryne Formation is defined by the strongly erosional base of a succession of stacked channel sandstones, interpreted as the fill of a system of incised valleys. Most of the stacked channel sandstones show abundant mud laminae and flasers, and rare herringbone structures, suggesting that they were deposited in a tidal environment, probably an estuary. Several tens of metres of the lower Bryne Formation may have been removed by erosion at this unconformity. The estuarine channel sandstone succession is capped by coal beds that attain a thickness of several metres in the western part of the Søgne Basin, but are thin and poorly developed in the central part of the basin. Above the coal beds, the Lulu Formation is dominated by various types of tidally influenced paralic deposits in the western part of the basin and by coarsening-upwards shoreface and beach deposits in central parts. Westwards-thickening wedges of paralic deposits interfinger with eastwards-thickening wedges of shallow marine deposits. The Middle Jurassic succession is subdivided into nine sequences. In the lower Bryne Formation, sequence boundaries are situated at the base of laterally continuous fluvial channel sandstones whereas maximum flooding surfaces are placed in laterally extensive floodplain

  1. Trans-border (south-east Serbia/west Bulgaria correlations of the Jurassic sediments: Infra-Getic Unit

    Directory of Open Access Journals (Sweden)

    Tchoumatchenco Platon

    2006-01-01

    Full Text Available The Infra-Getic Unit is a palaeogeographic unit, predestined by palaeotectonics. From the point of view of geological heritage, it represents a geosites framework. For the purpose of the correlation, the Serbian sections of Lukanja, Bogorodica Monastery, Rosomač and Senokos, as well as the Bulgarian sections of Komshtitsa, Gintsi, and Stanyantsi were used. The Jurassic sediments of the Infra-Getic Unit crop out on the southern slops of the Stara Planina Mountain in east Serbia and west Bulgaria. The Lower Jurassic started with continental and continental-marine sediments (clays and sandstones (Lukanja clastics and Lukanja coal beds in Serbia and the Tuden Formation in Bulgaria and continue with Lukanja quartz sandstones (Serbia and the Kostina Formation (Bulgaria. These sediments are covered by Lukanja brachiopod beds and Lukanja limestones (Serbia and the Romanov Dol, Ravna and Dolni Loukovit Members of the Ozirovo Formation (Bulgaria predominantly consist of bioclastic limestones. The sedimentations follow with Lukanja belemnites-gryphaea beds (marls and clayey limestones, which in Bulgaria correspond to the Bukorovtsi Member (also marls and clayey limestones of the Ozirovo Formation. The Middle Jurassic sedimentation started with black shales with Bossitra alpine. These sediments are individualized in Serbia as Senokos aleurolites and clays and in Bulgaria they are known as the Etropole Formation. In Serbia the section continues with sandstones called Vodenički sandstones of Bajocian age, known in Bulgaria as the Dobrogled Member of the Polaten Formation. However, in Bulgaria, the age is Upper Bajocian-Lower Bathonian, and it cover the marls of the lower member (Gornobelotintsi Member of the Bov Formation and is covered by the upper member - alternation of marls and clayey limestones - the Verenitsa Member of the Bov Formation. The Vodenički sandstones-Dobrogled Member which ended their distribution in the section of Komshtitsa, to the

  2. The Effect of Arrowroot Flour (Maranta Arrundinaceae on Physical And Sensoric Qualitiy of Rabbit Nugget

    Directory of Open Access Journals (Sweden)

    Ulfi Noor Hakim

    2014-10-01

    Full Text Available This experiment was conducted to observe the effect of addition level of arrowroot flour (Maranta arrundinaceae on physical and sensoric quality of rabbit nugget. Rabbit meat and arrowroot flour were used in current experiment. There were four treatments with three repetations in current experiment, addition level of arrowroot flour 0 % (P0, 10 % (P1, 20 % (P2, and 30 % (P3 in rabbit nugget. The variables measured in experiment were physical quality (pH, water holding capacity, and texture and sensory quality (color, flavor, odour, and texture. This experiment was statisically analyzed by using Completelly Randomized Design (CRD. The difference between means was analyzed by Duncan’s Multiple Range Test (DMRT. This experiment showed that pH, water holding capacity, and sensoric quality (color, flavor, odour, and texture were significantly affected (P 0.05 in physical texture. The addition level 20 % of arrowroot flour (P2 gave the highest value on physyical and organoleptic quality of rabbit nugget. The conclusion of this experiment was the increase of addition level of arrowroot flour in rabbit nugget improved the phyical texture, but it reduced pH, water holding capacity, and sensoric palatability (color, flavor, odour, and texture.

  3. Giant stromatolites and a supersurface in the Navajo Sandstone, Capitol Reef National Park, Utah

    Science.gov (United States)

    Eisenberg, Len

    2003-02-01

    At Capitol Reef National Park, Utah, 5-m-high stromatolites are present locally on interdune carbonate lenses in the Early Jurassic Navajo Sandstone. The stromatolites display both finely laminated and fenestral internal fabrics, and grew along south-facing interdune margins. These stromatolites formed during a high-water-table episode engendered by a dune-dammed paleodrainage in a stabilized Navajo erg. These stromatolites, and the thick interdune section associated with them, suggest a hiatus in erg accumulation and the presence of a super bounding surface.

  4. Possible trace fossils of putative termite origin in the Lower Jurassic (Karoo Supergroup of South Africa and Lesotho

    Directory of Open Access Journals (Sweden)

    O. Catuneanu

    2010-01-01

    Full Text Available Complex structures in the sandstones of the Lower Jurassic aeolian Clarens Formation (Karoo Supergroup are found at numerous localities throughout southern Africa, and can be assigned to five distinct architectural groups: (1 up to 3.3-m high, free-standing, slab-shaped forms of bioturbated sandstones with elliptical bases, orientated buttresses and an interconnecting large burrow system; (2 up to 1.2-m high, free-standing, irregular forms of bioturbated sandstones with 2-cm to 4-cm thick, massive walls, empty chambers and vertical shafts; (3 about 0.15-m to 0.25-m high, mainly bulbous, multiple forms with thin walls (larger than 2 cm, hollow chambers with internal pillars and bridges; (4 about 0.15-m to 0.2-m (maximum 1-m high, free-standing forms of aggregated solitary spheres associated with massive horizontal, orientated capsules or tubes, and meniscate tubes; and (5 about 5 cmin diameter, ovoid forms with weak internal shelving in a close-fitting cavity. Based on size, wall thickness, orientation and the presence of internal chambers, these complex structures are tentatively interpreted as ichnofossils of an Early Jurassic social organism; the different architectures are reflective of the different behaviours of more than one species, the history of structural change in architectural forms (ontogenetic series or an architectural adaptation to local palaeoclimatic variability. While exact modern equivalents are unknown, some of these ichnofossils are comparable to nests (or parts of nests constructed by extant termites, and thus these Jurassic structures are very tentatively interpreted here as having been made by a soil-dwelling social organism, probably of termite origin. This southern African discovery, along with reported Triassic and Jurassic termite ichnofossils from North America, supports previous hypotheses that sociality in insects, particularity in termites, likely evolved prior to the Pangea breakup in the Early Mesozoic.

  5. KOMPOSISI KIMIA DAN ORGANOLEPTIK FORMULA NUGGET BERBASIS TEPUNG TEMPE DAN TEPUNG RICEBRAN

    Directory of Open Access Journals (Sweden)

    Sufiati Bintanah

    2014-07-01

    Full Text Available Abstrak Di Indonesia terjadi perubahan pola penyakit dari infeksi dan kekurangan gizi ke degeneratif dan kanker akibat perubahan gaya hidup dan pola makan  tinggi lemak dan rendah serat serta modernisasi pola hidup. Tempe kedelai merupakan bahan makanan yang dapat menurunkan trigliserida, kolesterol total, kolesterol LDL, serta meningkatkan kolesterol HDL. Bekatul juga merupakan bahan makanan yang dapat menurunkan kadar lemak darah karena mengandung oryzanol, tokoferol, dan asam felurat. Tujuan dari penelitian ini adalah untuk menyeleksi formula nugget berdasarkan karakteristik fisik, kimia dan organoleptik serta aktifitas antioksidan. Jenis penelitian ini adalah penelitian diskriptif dengan perlakuan formulasi tepung tempe dan tepung ricebran sebanyak 10 formula. Analisis komposisi kimia dilakukan terhadap bahan mentah dan nugget meliputi analisis protein (mikro kjedhl, lemak (soxhlet, air (oven, karbohidrat (Luff Schoorl l, penetapan kadar Vitamin E (Alfa-Tokoferol, analisa aktivitas anti bakteri metode difusi agar. Pengujian organoleptik menggunakan metode scoring. Hasil menunjukkan nugget dengan formula tepung tempe 50% dan tepung bekatul 50% (formula A7, mempunyai komposisi kimia terbaik yaitu protein 19,5g%, lemak 18.33g%, air 35.59%, abu 1,62%, serat kasar 9,57g%, Karbohidrat 25,41 g%, Vitamin E 148,92 µg/g, aktifitas antioksidan 197,1 µg/ml. Hasil pengujian organoleptik terhadap warna, rasa, aroma maupun tekstur yang paling disuka pada formula A7. Kesimpulan: Optimasi tepung tempe dan rice bran yang diterima berdasarkan sifat fisik, organoleptik dan analisa zat gizi adalah dengan perlakuan sangrai 20 menit. Formula nugget yang optimum A7 dengan perbandingan tepung tempe dan rice bran 50:50 g. Kata Kunci: Komposisi Kimia, Organoleptik, Formula Nugget, Tepung Tempe, Ricebran Abstract In Indonesia, there has been a changing disease pattern from infectious and food deficiency diseases to degenerative and cancerous diseases. Soy bean cake

  6. Effect of fermented bamboo shoot on the quality and shelf life of nuggets prepared from desi spent hen

    Directory of Open Access Journals (Sweden)

    Ankur Das

    Full Text Available Aim: An investigation was carried out to prepare nuggets from the relatively tough and fibrous meat of desi spent hen using fermented bamboo shoot as a phytopreservative in order to enhance the physico-chemical, microbiological and keeping quality of the nuggets. Materials and Methods: Lean meat of desi spent hen was minced and blended along with other non-meat ingredients and fermented bamboo shoot @10%. The emulsion was filled in metallic moulds and steam cooked and cut into pieces. Ready-toeat nuggets thus prepared were packed in sterilized LDPE zip bags and stored at 4±1°C up-to 15 days for quality evaluation. Emulsion stability (%, cooking yield (%, a and proximate composition were studied on the day of preparation, while estimation of pH, TBA values, microbial load and sensory evaluation were carried out at 5 days interval and up-to 15th day of storage. Results: The emulsion stability (%, cooking yield (%, moisture (%, crude protein (% and total ash (% of FBS treated nuggets differed significantly (p<0.01 from the control products. Storage studies revealed significantly lower (p<0.01 pH, TBA value, total plate count, psychrophillic count and counts for yeast and moulds in FBS treated nuggets in comparison to control products. Both control and treated nuggets exhibited gradual loss of panel ratings during the storage period (4±1°C for 15 days, however, nuggets containing fermented bamboo shoot revealed significantly higher (p<0.01 mean sensory scores in terms of flavour, texture, juiciness and overall acceptability. Conclusion: Nuggets with better physico-chemical and shelf life can be prepared with incorporation of fermented bamboo shoot @10% (w/w to the nugget emulsion. [Vet World 2013; 6(7.000: 419-423

  7. Mechanism and Influencing Factors of Iron Nuggets Forming in Rotary Hearth Furnace Process at Lower Temperature

    Science.gov (United States)

    Han, Hongliang; Duan, Dongping; Chen, Siming; Yuan, Peng

    2015-10-01

    In order to improve the efficiency of slag and iron separation, a new idea of "the separation of slag (solid state) and iron (molten state) in rotary hearth furnace process at lower temperature" is put forward. In this paper, the forming process of iron nuggets has been investigated. Based on those results, the forming mechanisms and influencing factors of iron nugget at low temperature are discussed experimentally using an electric resistance furnace simulating a rotary hearth furnace process. Results show that the reduction of iron ore, carburization of reduced iron, and the composition and quantity of slag are very important for producing iron nuggets at lower temperature. Reduction reaction of carbon-containing pellets is mainly at 1273 K and 1473 K (1000 °C and 1200 °C). When the temperature is above 1473 K (1200 °C), the metallization rate of carbon-containing pellets exceeds 93 pct, and the reduction reaction is substantially complete. Direct carburization is the main method for carburization of reduced iron. This reaction occurs above 1273 K (1000 °C), with carburization degree increasing greatly at 1473 K and 1573 K (1200 °C and 1300 °C) after particular holding times. Besides, to achieve the "slag (solid state) and iron (molten state) separation," the melting point of the slag phase should be increased. Slag (solid state) and iron (molten state) separation can be achieved below 1573 K (1300 °C), and when the holding time is 20 minutes, C/O is 0.7, basicity is less than 0.5 and a Na2CO3 level of 3 pct, the recovery rate of iron can reach 90 pct, with a proportion of iron nuggets more than 3.15 mm of nearly 90 pct. This study can provide theoretical and technical basis for iron nugget production.

  8. Effect of vacuum packaging and pomegranate peel extract on quality aspects of ground goat meat and nuggets.

    Science.gov (United States)

    Devatkal, Suresh K; Thorat, Pramod; Manjunatha, M

    2014-10-01

    The effect of vacuum packaging and pomegranate peel extract on ground goat meat and cooked nuggets during refrigerated storage (4 ± 1 °C) was evaluated. Three different treatments evaluated were: I). Aerobic packaging (AP); II) Vacuum packaging (VP) and III). Vacuum packaging along with 1 % pomegranate peel extract (VP + PPE). Results of quality evaluation showed that VP and VP + PPE maintained a more stable colour than AP. In all treatments, a significant (P log 7) in AP than VP meat and nuggets. Thus VP and PPE have a synergistic antioxidant effect and VP extended the refrigerated shelf life of goat meat and nuggets.

  9. Reconstruction of Original SedimentaryProvince of the Jurassic in the Northwestern China%西北地区侏罗纪原始沉积区恢复

    Institute of Scientific and Technical Information of China (English)

    薛良清; 李文厚

    2000-01-01

    The Jurassic strata are widely distributed in the northwesternChina. The Early to early Middle Jurassic strata are major coal-bearing strata in the northwestern China that consist of sedimentary products of warm-humid climte,which are easily traced and correlated regionally. The late Middle to Late Jurassic strata are mainly composed of red beds, interbedded conglomerate and light-gray sandstones deposited in the alluvial and fluvial environments, showing paleoclimate changed from humid to dry features. In recent years, hydrocarbon exploration and researches in the Jurassic of NW China found the following facts:many present basin-margin areas often lack basinmarginal coarse-grain sediments of the Jurassic, while present tectonic uplift belts separating sedimentary basins are not present in some periods of the Jurassic or even whole Jurassic. Thus, it is necessary to reconstruct original sedimentary province of the Jurassic basins in NW China. Reconstruction of sedimentary province of the Jurassic in NW China is based on marginal sedimentary facies analysis, stratigraphic contact relationship analysis, paleocurrent system analysis, and tectonic/structural framework analysis. Marginal sedimentary facies analysis focuses on identifying alluvial fan and fluvial depositional systems that define sedimentary extent of basins. Stratigraphic contact relationship analysis is study on relationship between the residual Jurassic strata and underlying or overlaying strata because the relationship reflects depositional setting of the Jurassic strata and transform extent after the Jurassic deposition. Paleocurrent system analysis can help recognize relationship among remade basins at present. Identification of source area, shape and boundary of basins can be carried out on the basis of paleocurrent distribution. Tectonic/structural framework directly or indirectly affects deposition, sometimes are main factor to control sdimentary province and distribution of depositional systems

  10. Solid Inclusions in Au-nuggets, genesis and derivation from alkaline rocks of the Guli Massif, Northern Siberia

    Directory of Open Access Journals (Sweden)

    Dvorani Sami N.

    2016-04-01

    Full Text Available A total of 112 Au-nuggets, collected from alluvial placer deposits of the Ingarinda River from the Guli massif, located in northem Siberia, Russia, were investigated. The Guli massif consists of a huge dunite-clinopyroxenite complex (the largest complex in the world, an alkaline to highly alkaline rock suite (melilite, nephelinite, ijolite enveloping the dunite and carbonatite intrusions, associated with disseminated schlieren type chromitite and Au-Ag, Pt placer deposits. The nuggets are characterized by various sizes and shapes and show chemical compositions Au, Au-Ag and AuCu, typical for a derivate of carbon-atites and/or ultramafic complexes. A great variety of oxide, silicate, REE-minerals, carbonate and sulphide inclusions have been detected in the nuggets, which are identical in mineralogy and chemical composition to mineral constituents of the alkaline to highly alkaline rock suite surrounding the Guli dunite core complex thus, considered as the source for Au-nuggets.

  11. Storms and tsunamis: evidence of event sedimentation in the Late Jurassic Tendaguru Beds of southeastern Tanzania

    Science.gov (United States)

    Bussert, Robert; Aberhan, Martin

    2004-06-01

    In Late Jurassic shallow marine siliciclastic sediments of the dinosaur-bearing Tendaguru Beds from the Mandawa Basin of southeastern Tanzania we identified several event deposits. Based on an analysis of their sedimentological and palaeontological features, a storm-induced origin can be assumed for the majority of these deposits. This interpretation is in agreement with the regional palaeogeography and palaeoclimatological data, and is further supported by the widespread evidence of Late Jurassic storm-controlled sedimentation in adjacent basins along the East African margin. A particularly striking feature is a laterally extensive, conglomeratic bed with gravel components up to 30 cm in diameter, and megaripples indicating southward transport directions. The troughs between ripples are filled by cross-bedded fine-grained sandstones and siltsones with inferred transport directions to the north. Giant bedforms, a mixture of clasts of marine and continental origin, and evidence of opposite current directions suggest that this chaotically deposited sediment may have formed from a tsunami. Within the available time resolution this event is synchronous with the Morokweng impact structure in South Africa. However, because of the considerable distance of Morokweng from the Jurassic sea, direct links between both events cannot be established. Alternative mechanisms such as a landslide-generated tsunami are plausible, but not yet supported by geophysical data.

  12. Using the Moon As A Low-Noise Seismic Detector For Strange Quark Nuggets

    Science.gov (United States)

    Banerdt, W. Bruce; Chui, Talso; Griggs, Cornelius E.; Herrin, Eugene T.; Nakamura, Yosio; Paik, Ho Jung; Penanen, Konstantin; Rosenbaum, Doris; Teplitz, Vigdor L.; Young, Joseph

    2006-01-01

    Strange quark matter made of up, down and strange quarks has been postulated by Witten [1]. Strange quark matter would be nearly charge neutral and would have density of nuclear matter (10(exp 14) gm/cu cm). Witten also suggested that nuggets of strange quark matter, or strange quark nuggets (SQNs), could have formed shortly after the Big Bang, and that they would be viable candidates for cold dark matter. As suggested by de Rujula and Glashow [2], an SQN may pass through a celestial body releasing detectable seismic energy along a straight line. The Moon, being much quieter seismically than the Earth, would be a favorable place to search for such events. We review previous searches for SQNs to illustrate the parameter space explored by using the Moon as a low-noise detector of SQNs. We also discuss possible detection schemes using a single seismometer, and using an International Lunar Seismic Network.

  13. Using the Moon As A Low-Noise Seismic Detector For Strange Quark Nuggets

    Science.gov (United States)

    Banerdt, W. Bruce; Chui, Talso; Griggs, Cornelius E.; Herrin, Eugene T.; Nakamura, Yosio; Paik, Ho Jung; Penanen, Konstantin; Rosenbaum, Doris; Teplitz, Vigdor L.; Young, Joseph

    2006-01-01

    Strange quark matter made of up, down and strange quarks has been postulated by Witten [1]. Strange quark matter would be nearly charge neutral and would have density of nuclear matter (10(exp 14) gm/cu cm). Witten also suggested that nuggets of strange quark matter, or strange quark nuggets (SQNs), could have formed shortly after the Big Bang, and that they would be viable candidates for cold dark matter. As suggested by de Rujula and Glashow [2], an SQN may pass through a celestial body releasing detectable seismic energy along a straight line. The Moon, being much quieter seismically than the Earth, would be a favorable place to search for such events. We review previous searches for SQNs to illustrate the parameter space explored by using the Moon as a low-noise detector of SQNs. We also discuss possible detection schemes using a single seismometer, and using an International Lunar Seismic Network.

  14. Sequence stratigraphy of the Kingak Shale (Jurassic-Lower Cretaceous), National Petroleum Reserve in Alaska

    Science.gov (United States)

    Houseknecht, D.W.; Bird, K.J.

    2004-01-01

    Beaufortian strata (Jurassic-Lower Cretaceous) in the National Petroleum Reserve in Alaska (NPRA) are a focus of exploration since the 1994 discovery of the nearby Alpine oil field (>400 MMBO). These strata include the Kingak Shale, a succession of depositional sequences influenced by rift opening of the Arctic Ocean Basin. Interpretation of sequence stratigraphy and depositional facies from a regional two-dimensional seismic grid and well data allows the definition of four sequence sets that each displays unique stratal geometries and thickness trends across NPRA. A Lower to Middle Jurassic sequence set includes numerous transgressive-regressive sequences that collectively built a clastic shelf in north-central NPRA. Along the south-facing, lobate shelf margin, condensed shales in transgressive systems tracts downlap and coalesce into a basinal condensed section that is likely an important hydrocarbon source rock. An Oxfordian-Kimmeridgian sequence set, deposited during pulses of uplift on the Barrow arch, includes multiple transgressive-regressive sequences that locally contain well-winnowed, shoreface sandstones at the base of transgressive systems tracts. These shoreface sandstones and overlying shales, deposited during maximum flooding, form stratigraphic traps that are the main objective of exploration in the Alpine play in NPRA. A Valanginian sequence set includes at least two transgressive-regressive sequences that display relatively distal characteristics, suggesting high relative sea level. An important exception is the presence of a basal transgressive systems tract that locally contains shoreface sandstones of reservoir quality. A Hauterivian sequence set includes two transgressive-regressive sequences that constitute a shelf-margin wedge developed as the result of tectonic uplift along the Barrow arch during rift opening of the Arctic Ocean Basin. This sequence set displays stratal geometries suggesting incision and synsedimentary collapse of the shelf

  15. Using the Moon and Mars as Giant Detectors for Strange Quark Nuggets

    Science.gov (United States)

    Chui, Talso; Penanen, Konstantin; Strayer, Don; Banerdt, Bruce; Tepliz, Vigdor; Herrin, Eugene

    2004-01-01

    On the Earth, the detectability of small seismic signals is limited by pervasive seismic background noise, caused primarily by interactions of the atmosphere and oceans with the solid surface. Mars, with a very thin atmosphere and no ocean is expected to have a noise level at least an order of magnitude lower than the Earth, and the airless Moon is even quieter still. These pristine low-vibration environments are ideal for searching for nuggets of "strange quark matter." Strange quark matter was postulated by Edward Witten [Phys. Rev. D30, 272, 1984] as the lowest possible energy state of matter. It would be made of up, down, and strange quarks, instead of protons and neutrons made only of up and down quarks. It would have nuclear densities, and hence be difficult to detect. Micron-sized nuggets would weigh in the ton range. As suggested by de Rujula and Glashow [Nature 312 (5996): 734, 1984], a massive strange quark nugget can generate a trail of seismic waves, as it traverses a celestial body. We discuss the mission concept for deploying a network of sensitive seismometers on Mars and on the Moon for such a search.

  16. Using the Moon and Mars as Giant Detectors for Strange Quark Nuggets

    Science.gov (United States)

    Chui, Talso; Penanen, Konstantin; Strayer, Don; Banerdt, Bruce; Tepliz, Vigdor; Herrin, Eugene

    2004-01-01

    On the Earth, the detectability of small seismic signals is limited by pervasive seismic background noise, caused primarily by interactions of the atmosphere and oceans with the solid surface. Mars, with a very thin atmosphere and no ocean is expected to have a noise level at least an order of magnitude lower than the Earth, and the airless Moon is even quieter still. These pristine low-vibration environments are ideal for searching for nuggets of "strange quark matter." Strange quark matter was postulated by Edward Witten [Phys. Rev. D30, 272, 1984] as the lowest possible energy state of matter. It would be made of up, down, and strange quarks, instead of protons and neutrons made only of up and down quarks. It would have nuclear densities, and hence be difficult to detect. Micron-sized nuggets would weigh in the ton range. As suggested by de Rujula and Glashow [Nature 312 (5996): 734, 1984], a massive strange quark nugget can generate a trail of seismic waves, as it traverses a celestial body. We discuss the mission concept for deploying a network of sensitive seismometers on Mars and on the Moon for such a search.

  17. INDUSTRI RUMAH TANGGA NUGGET BABI DALAM UPAYA MENINGKATKAN PEREKONOMIAN MASYARAKAT DI DESA BLAHKIUH

    Directory of Open Access Journals (Sweden)

    Putri B.R.T.

    2012-10-01

    Full Text Available This Community service was held on Friday, September 19th 2008 in Balai Banjar Ulapan 1 Blahkiuh Village, District Abiansemal, Badung Regency. It aimed to increase farmers’ knowledge about new innovation and technology in processing field of ranch result. This activity applied two methods, namely counseling and direct application. Participants who attended the counseling session were given about agribusiness, and discussion about the existing problems faced by farmer. Besides, they were given information about ways of processing pork meat to be nugget with its economic perspectives. Application method was conducted by practicing to make pork nugget attended by the PKK members. Conclusion can be taken that this activity was warmly welcome by the Head of Village and staff, farmers and PKK society who were present then. All participants were diligent and responsive attending the counseling. This can be seen from many questions raised during the discussion time. Economic analysis was done on pork meat processing to become nugget which indicated satisfactory result, by profit level reaching 162%. Suggestion can be given that counseling activities along with direct practice continuously, the farmer and society who used not to know theoretically are able to use the new technology

  18. Siderite (FeCO3)—the Hidden (but Primary) Player in Iron Diagenesis of Non-Marine Sandstones

    Science.gov (United States)

    Loope, D.; Kettler, R. M.

    2015-12-01

    Siderite precipitates in reducing pore waters in which iron reduction exceeds sulfate reduction. Abundant siderite should be expected in non-marine strata in which a reductant was present. The Triassic Shinarump Member (Chinle Fm) and Cretaceous Dakota Fm are fluvial and contain siderite in outcrops of floodplain mudstones. Siderite is present in cores of Dakota channel sandstones. Rinded and jointed iron-oxide concretions, Wonderstone patterns, and rhombic, iron-oxide pseudomorphs are present in outcrops of these sandstones. Vascular plants growing on floodplains provided the reductant. Similar concretions, patterns, and pseudomorphs are present in outcropping eolian cross-strata of the Jurassic Navajo Sandstone and in fluvial sandstone of the Cambrian Umm Ishrin Fm. Bleached sandstones indicate reductant was present in both units during late diagenesis. Because Jurassic deserts and Cambrian river systems lacked vascular plants, extra-formational methane was the likely reductant. We interpret the various iron-oxide-cemented phenomena of the Shinarump, Dakota, Navajo, and Umm Ishrin as products of siderite oxidation that accompanied exhumation. In the Navajo, large concretions are enclosed in thick sheaths of iron-oxide cement. Through-going horizontal and vertical joints cut sheaths. Outside concretion sheaths, joints are unassociated with iron-oxide cements, but inside the sheaths, thick cement zones are present on both sides of (still-open) joints. Joints were conduits for oxidizing water entering the concretions. Redox gradients formed on both sides of joints and iron oxide accumulated as Fe+2 diffused from dissolving siderite toward joints and O2 diffused away from joints. Horizontal joints formed <100 m from the land surface. Iron-oxide accumulations on the horizontal joints and on the vertical joints that abut them (see figure) are evidence that siderite oxidation is ongoing and linked to exhumation.

  19. Downslope coarsening in aeolian grainflows of the Navajo Sandstone

    Science.gov (United States)

    Loope, David B.; Elder, James F.; Sweeney, Mark R.

    2012-07-01

    Downslope coarsening in grainflows has been observed on present-day dunes and generated in labs, but few previous studies have examined vertical sorting in ancient aeolian grainflows. We studied the grainflow strata of the Jurassic Navajo Sandstone in the southern Utah portion of its outcrop belt from Zion National Park (west) to Coyote Buttes and The Dive (east). At each study site, thick sets of grainflow-dominated cross-strata that were deposited by large transverse dunes comprise the bulk of the Navajo Sandstone. We studied three stratigraphic columns, one per site, composed almost exclusively of aeolian cross-strata. For each column, samples were obtained from one grainflow stratum in each consecutive set of the column, for a total of 139 samples from thirty-two sets of cross-strata. To investigate grading perpendicular to bedding within individual grainflows, we collected fourteen samples from four superimposed grainflow strata at The Dive. Samples were analyzed with a Malvern Mastersizer 2000 laser diffraction particle analyser. The median grain size of grainflow samples ranges from fine sand (164 μm) to coarse sand (617 μm). Using Folk and Ward criteria, samples are well-sorted to moderately-well-sorted. All but one of the twenty-eight sets showed at least slight downslope coarsening, but in general, downslope coarsening was not as well-developed or as consistent as that reported in laboratory subaqueous grainflows. Because coarse sand should be quickly sequestered within preserved cross-strata when bedforms climb, grain-size studies may help to test hypotheses for the stacking of sets of cross-strata.

  20. Development characteristics of interlayer oxidation zone type of sandstone uranium deposits in the southwestern Turfan-Hami basin

    Institute of Scientific and Technical Information of China (English)

    YANG; Dianzhong; XIA; Bin; WU; Guogan

    2004-01-01

    The Turfan-Hami basin is the key area for the exploration of sandstone uranium deposits of the leachable interlayered oxidation zone type. The aim of this study is to shed light on the development characteristics of this type of uranium deposits and provide new clues to further exploration. Detailed study led to the following conclusions: (1) uranium orebodies are hosted mainly in the lower Middle Jurassic Xishanyao Formation and the lower Lower Jurassic Badaowan Formation; (2) the formation of uranium orebodies is closely related to organic matter; (3) the front of the interlayered oxidation zone is snake-shaped in plane and imbricated in the section; the more the interlayered oxidation zone and zonation are developed, the better the uranium mineralization will be; according to lithological and geochemical characteristics, the oxidation zone, the oxidation-reduction transitional zone and the reduction zone can be distinguished; (4) the development of interlayered oxidation zone is controlled by geological structure, underground water, sandstone permeability and other factors; (5) sandstone uranium orebodies hosted in the interlayered oxidation zone are very complicated in spatial distribution, of which some are rolled and plated in shape and some are highly variable in shape.

  1. Tectonic Evolution of the Jurassic Pacific Plate

    Science.gov (United States)

    Nakanishi, M.; Ishihara, T.

    2015-12-01

    We present the tectonic evolution of the Jurassic Pacific plate based on magnetic anomly lineations and abyssal hills. The Pacific plate is the largest oceanic plate on Earth. It was born as a microplate aroud the Izanagi-Farallon-Phoenix triple junction about 192 Ma, Early Jurassic [Nakanishi et al., 1992]. The size of the Pacific plate at 190 Ma was nearly half that of the present Easter or Juan Fernandez microplates in the East Pacific Rise [Martinez et at, 1991; Larson et al., 1992]. The plate boundary surrounding the Pacific plate from Early Jurassic to Early Cretaceous involved the four triple junctions among Pacific, Izanagi, Farallon, and Phoenix plates. The major tectonic events as the formation of oceanic plateaus and microplates during the period occurred in the vicinity of the triple junctions [e.g., Nakanishi and Winterer, 1998; Nakanishi et al., 1999], implying that the study of the triple junctions is indispensable for understanding the tectonic evolution of the Pacific plate. Previous studies indicate instability of the configuration of the triple junctions from Late Jurassic to Early Cretaceous (155-125 Ma). On the other hand, the age of the birth of the Pacific plate was determined assuming that all triple junctions had kept their configurations for about 30 m.y. [Nakanishi et al., 1992] because of insufficient information of the tectonic history of the Pacific plate before Late Jurassic.Increase in the bathymetric and geomagnetic data over the past two decades enables us to reveal the tectonic evolution of the Pacific-Izanagi-Farallon triple junction before Late Jurassic. Our detailed identication of magnetic anomaly lineations exposes magnetic bights before anomaly M25. We found the curved abyssal hills originated near the triple junction, which trend is parallel to magnetic anomaly lineations. These results imply that the configuration of the Pacific-Izanagi-Farallon triple junction had been RRR before Late Jurassic.

  2. The first dinosaur tracksite from Xinjiang, NW China (Middle Jurassic Sanjianfang Formation, Turpan Basin)——a preliminary report

    Institute of Scientific and Technical Information of China (English)

    Oliver WINGS; Rico SCHELLHORN; Heinrich MALLISON; Ben THUY; Wenhao WU; Ge SUN

    2007-01-01

    A new dinosaur tracksite was discovered in a steeply inclined sandstone layer of the Middle Jurassic Sanjianfang Formation in the Shanshan area of the Turpan Basin. The site is the first record of dinosaur footprints from Xinjiang Province in northwestern China. More than 150 tridactyl theropod dinosaur footprints are preserved as positive hyporeliefs on the lower bedding plane of a fine-grained sandstone body. Most of the footprints are isolated and appear to be randomly distributed. Some show well defined phalangeal pads, heels and rarely indistinct impressions of the distal part of the metatarsus. Two distinct morphotypes are present: a larger type with relatively broad pads shows similarities to Changpeipus and Megalosauripus, and a slightly smaller, slender and gracile type which is similar to Grallator, Eubrontes and Anchisauripus. In both morphotypes, digit III is the longest with a length between 11.4 and 33.6 cm. A single imprint shows prominent scratches, probably formed during slipping of the track maker.

  3. Trap architecture of the Early Cretaceous Sarir Sandstone in the eastern Sirt Basin, Libya

    Energy Technology Data Exchange (ETDEWEB)

    Gras, R. [Schlumberger GeoQuest, Cedex (France); Thusu, B. [Arabian Gulf Oil Company, Benghazi (Libyan Arab Jamahiriya)

    1998-12-31

    The Sarir Sandstone is the principal reservoir for oil accumulations in the eastern Sirt Basin in Libya. The main phase of the rifting in this area took place in the Late Jurassic-Early Cretaceous, during which time the Sarir Sandstone was deposited as a non-marine, intra-continental clastic syn-rift sequence. Although successfully explored from 1959 onwards, the prolific eastern Sirt Basin is in a relatively immature stage of exploration regarding wildcat drilling and 3D seismic data acquisition. The most recent phase of exploration, utilizing 3D seismic techniques, revealed a complex structural development. The trap geometries are often related to E-W trending, basement-controlled fault systems, oblique to the NNW-SSE Sirt Basin trend. The fault systems were active during the Sarir Sandstone deposition, giving rise to structural as well as combined structural-traps. An increased understanding of trap architecture has led to both re-evaluation of older fields and new discoveries. (author)

  4. Carbonate cementation-dissolution in deep-seated sandstones near the overpressure top in central Junggar Basin, Xinjiang, NW China

    Institute of Scientific and Technical Information of China (English)

    YANG Zhi; HE Sheng; WANG Furong; HE Zhiliang; WU Hengzhi; MENG Xianlong

    2009-01-01

    Fluid/rock interaction occurs frequently in the sandstones near the overpressure top in central Junggar Basin, and carbonate cementation-dissolution is related closely to the formation of secondary pores in the reservoir sandstones. From petrological, hydrochemical and fluid-inclusion studies of the deep-seated sandstones near the overpressure top in central Junggar Basin and the carbon and oxygen isotopic characteristics of carbonate cements in those sandstones, the following conclusions can be drawn: (1) Carbonates are the major cements. Two-stage cemen-tation was commonly developed, with late-stage ferroan carbonate cementation being dominant; several secondary porosity zones were developed vertically in the sandstones near the overpressure top, and there is a mutually com-pensatory relationship between the carbonate contents and the mean porosity; (2) the alkalescent formation-water chemical environments are in favor of carbonate precipitation; (3) there were two phases of thermal fluid activity which are related to the late-stage carbonate cementation-dissolution; (4) with the overpressure top as the boundary, carbonate cements in the sandstones have slightly negative δ13C and δ180 values, showing such a variation trend that the δ13C and δ18O values near the coal-bearing Jurassic strata are lighter, those in the overpressure top are heavier, and those at the upper part of the overpressure top are lighter, which is considered to be the result of kinetic isotope fractionation driven by episodically overpressured fluid flow; (5) carbonate cementation is closely associated with the decarboxylation of organic acids, and secondary porosity zones resultant from dissolution by organic acids and CO2 derived from Jurassic coal-beating strata, are the most important reservoir space of hydrocarbon, Studies of the mechanisms of carbonate cementation-dissolution and formation of secondary pores in the deep-seated sandstones near the overpressure top are of great

  5. Proximate and microbiological characterization of nuggets of mandi-pintado (Pimelodus britskiiCaracterização centesimal e microbiológica de nuggets de mandi-pintado (Pimelodus britskii

    Directory of Open Access Journals (Sweden)

    Aldi Feiden

    2011-08-01

    Full Text Available This study aimed to evaluate centesimal and microbiological parameters of mandi-pintado nuggets. With the results from the biometry of the fish, it was possible to observe that the species shows high main trunk yield and low content of visceral fat. After the utilization of the body proportions, the steaks were grounded and breaded, and the samples (in natura and nuggets were separated to carry out centesimal and microbiological composition. The patties show 14,67% protein, 10,12% lipids, 16,43% carbohydrates, 2,70% mineral matter and 56,08% humidity, therefore fitting the patterns required by the Brazilian legislation. The microbiological results indicated that both the prime matter and the nuggets developed were ready for the processing and for the consumption. Therefore, mandi-pintado shows a high yeald of main trunk and a low content of visceral fat, besides from being an ideal raw for the development of nuggets that not only are a highly nutritious kind of food, but can also be easily prepared and have a high aggregated value.Este trabalho teve como objetivo avaliar os parâmetros centesimais e microbiológicos de nuggets de mandi-pintado. Com os resultados da biometria dos peixes pode-se observar que a espécie trabalhada apresenta alto rendimento de tronco limpo e baixo teor de gordura visceral. Após a realização das proporções corporais, os filés foram moídos e empanados, e as amostras (in natura e de nuggets foram separadas para a realização da composição centesimal e microbiológica. Os empanados apresentaram 14,67% de proteína, 10,12% de lipídios, 16,43% de carboidratos, 2,70% de matéria mineral e 56,08% de umidade, ou seja, dentro dos padrões exigidos pela legislação brasileira. Os resultados microbiológicos indicaram que tanto a matéria prima quanto os nuggets desenvolvidos estavam aptos para o processamento e/ou consumo. Portanto, o mandi-pintado apresenta alto rendimento de tronco limpo e baixo teor de gordura

  6. Micrometer- and nanometer-sized platinum group nuggets in micrometeorites from deep-sea sediments of the Indian Ocean

    Digital Repository Service at National Institute of Oceanography (India)

    Rudraswami, N.G.; Parashar, K.; ShyamPrasad, M.

    is observed in rare cases that too in very small percentages (i.e., less than 0.5 % except in one case where it was 1.1 %) and Rh is present only in small quantities (1.9 % and 1.4 %) in two of the nuggets. Overall, in the µm sized PGNs, it appears... of the spherules in all the cases (Fig. 1). In one spherule AAS26-D1-Hh, the nugget was found on the surface of the spherule (Figs. 1A and 1B). The diameters of the µm sized nuggets found here are: 4.9, 4.5, 3.3 and 3.6 µm (Fig. 1 and Table 3). Quite...

  7. Quark nugget dark matter: Comparison with radio observations of nearby galaxies

    Energy Technology Data Exchange (ETDEWEB)

    Lawson, K., E-mail: klawson@phas.ubc.ca; Zhitnitsky, A.R.

    2016-06-10

    It has been recently claimed that radio observations of nearby spiral galaxies essentially rule out a dark matter source for the galactic haze [1]. Here we consider the low energy thermal emission from a quark nugget dark matter model in the context of microwave emission from the galactic centre and radio observations of nearby Milky Way like galaxies. We demonstrate that observed emission levels do not strongly constrain this specific dark matter candidate across a broad range of the allowed parameter space in drastic contrast with conventional dark matter models based on the WIMP paradigm.

  8. Quark Nugget Dark Matter: Comparison with radio observations of nearby galaxies

    CERN Document Server

    Lawson, K

    2015-01-01

    It has been recently claimed that radio observations of nearby spiral galaxies essentially rule out a dark matter source for the galactic haze. Here we consider the low energy thermal emission from a quark nugget dark matter model in the context of microwave emission from the galactic centre and radio observations of nearby Milky Way like galaxies. We demonstrate that observed emission levels do not strongly constrain this specific dark matter candidate across a broad range of the allowed parameter space in drastic contrast with conventional dark matter models based on the WIMP paradigm.

  9. Dinosaur dynamics in the Jurassic Era

    Science.gov (United States)

    Lee, Scott

    2010-04-01

    Dinosaurs were fascinating animals and elicit much excitement in the classroom. Analysis of fossilized dinosaur trackways permits one to estimate the locomotion speeds and accelerations of these extinct beasts. Such analysis allows one to apply Newton's laws of motion to examples from the Jurassic Era.

  10. SICILIAN JURASSIC PHYSIOGRAPHY AND GEOLOGIC REALMS (ITALY

    Directory of Open Access Journals (Sweden)

    BENEDETTO ABATE

    2004-03-01

    Full Text Available Two tectono-sedimentary domains, which were deformed during the Neogene and evolved into two large structural sectors, characterize the Sicilian Jurassic: the Maghrebides and Peloritani. Africa margin sediments, passing downward to Triassic successions and perhaps originally to Paleozoic deposits, characterize the former. The latter belongs to the European "Calabrian Arc", where the Jurassic transgressively rests on a continental substrate (i.e. the crystalline Variscan basement. These domains are characterized by four sedimentary facies: shallow platform-derived limestones; condensed seamount-type red limestones; nodular limestones with ammonites; deep radiolarites and shales. These facies are illustrated in a dozen of stratigraphic logs. The drowning of most Triassic-Liassic carbonate platforms or ramps and the deepening of adjacent basins came with inferred Jurassic strike-slip tectonics, connected to the relative movement of Africa (Gondwanan part vs Europe (Laurasian part; the same strike-slip tectonics may have caused scattered intraplate volcanic seamounts found in Maghrebides. During the Jurassic the Maghrebide realm was characterized by the interfingering of basins and carbonate platforms. During the Early and Middle Liassic, carbonate platforms and ramps were dominant. Since Toarcian either radiolarites in some basins or Ammonite-bearing calcareous muds developed with intervening basaltic flows, and were accompanied by condensed pelagic carbonates on the ensialic seamount-type highs. The Peloritani realm displays similar characteristics, but with later transgression on the basement, several strike-slip basins and without any volcanoes.

  11. New Early Jurassic Tetrapod Assemblages Constrain Triassic-Jurassic Tetrapod Extinction Event

    Science.gov (United States)

    Olsen, P. E.; Shubin, N. H.; Anders, M. H.

    1987-08-01

    The discovery of the first definitively correlated earliest Jurassic (200 million years before present) tetrapod assemblage (Fundy basin, Newark Supergroup, Nova Scotia) allows reevaluation of the duration of the Triassic-Jurassic tetrapod extinction event. Present are tritheledont and mammal-like reptiles, prosauropod, theropod, and ornithischian dinosaurs, protosuchian and sphenosuchian crocodylomorphs, sphenodontids, and hybodont, semionotid, and palaeonisciform fishes. All of the families are known from Late Triassic and Jurassic strata from elsewhere; however, pollen and spore, radiometric, and geochemical correlation indicate an early Hettangian age for these assemblages. Because all ``typical Triassic'' forms are absent from these assemblages, most Triassic-Jurassic tetrapod extinctions occurred before this time and without the introduction of new families. As was previously suggested by studies of marine invertebrates, this pattern is consistent with a global extinction event at the Triassic-Jurassic boundary. The Manicouagan impact structure of Quebec provides dates broadly compatible with the Triassic-Jurassic boundary and, following the impact theory of mass extinctions, may be implicated in the cause.

  12. Giant weathering pits in the Entrada Sandstone, southeastern Utah: Preliminary findings

    Energy Technology Data Exchange (ETDEWEB)

    Netoff, D.I. (Sam Houston State Univ., Huntsville, TX (United States). Dept. of Geography and Geology); Shroba, R.R. (Geological Survey, Denver, CO (United States))

    1993-04-01

    Giant weathering pits formed in outcrops of the lower Entrada Sandstone slickrock of Jurassic age are present in two areas in the Glen Canyon region of arid southeastern Utah. The pits are far larger than any previously described in the geologic literature. The pits near Cookie Jar Butte are commonly cylindrical, typically have low width-to-depth ratios (1.5--3.6), and have a depth of closure of as much as 18 m. There are no obvious lithologic or structural controls that determine their shape or location. Many of the pits at Rock Creek Bay are elongate; several of them have long axes in excess of 53 m, and the longest one is 74 m. Many of the pit walls are breached at the top, and the depth of closure is generally less than 6 m. The shapes of these pits are influenced by point orientation and pit coalescence. Thin-section analyses of near-surface sandstone cores taken near Cookie Jar Butte from pit walls, floors, and rims reveal no significant diagenetic alteration of the fine-grained to very fine frained quartzose sandstone (quartz arenite). Quartz grains appear fresh, and feldspar grains are only slightly weathered. The cement between the grains is mostly CaCO[sub 3]. In several of the pits in both areas sandy sediment veneers the bedrock floor. This sediment is similar in character to the adjacent sandstone and is probably locally derived. Possible origins of the giant pits include various physical, chemical, and biological weathering processes that initiate pit development, followed by excavation by plunge-pool action, wind deflation, dissolution, and piping. Preliminary field and laboratory data do not clearly identify and single process of group of processes that account for pit development.

  13. Rate type isotach compaction of consolidated sandstone

    NARCIS (Netherlands)

    Waal, J.A. de; Thienen-Visser, K. van; Pruiksma, J.P.

    2015-01-01

    Laboratory experiments on samples from a consolidated sandstone reservoir are presented that demonstrate rate type compaction behaviour similar to that observed on unconsolidated sands and soils. Such rate type behaviour can have large consequences for reservoir compaction, surface subsidence and

  14. Formation of refractory metal nuggets and their link to the history of CAIs

    Science.gov (United States)

    Schwander, D.; Kööp, L.; Berg, T.; Schönhense, G.; Heck, P. R.; Davis, A. M.; Ott, U.

    2015-11-01

    Ca, Al-rich inclusions (CAIs) often contain numerous refractory metal nuggets (RMNs), consisting of elements like Os, Ir, Mo, Pt and Ru. The nuggets are usually thought to have formed by equilibrium condensation from a gas of solar composition, simultaneously with or prior to oxide and silicate minerals. However, the exact mechanisms responsible for their extremely variable compositions, small sizes and associations with CAI minerals remain puzzling. Expanding on previous work on chemically separated RMNs, we have studied a large number of RMNs within their host CAIs from three different meteorite types, i.e., the highly primitive chondrite Acfer 094 (C2-ungrouped), Allende (CV3ox) and Murchison (CM2). Our results show several inconsistencies between the observed features and a direct condensation origin, including a lack of correlated abundance variations in the refractory metals that are expected from variations in condensation temperature. Instead, we show that most RMN features are consistent with RMN formation by precipitation from a CAI liquid enriched in refractory metals. This scenario is additionally supported by the common occurrence of RMNs in CAIs with clear melt crystallization textures as well as the occurrence of synthetic RMNs with highly variable compositions in run products from Schwander et al. (2015). In some cases, the sizes of meteoritic RMNs correlate with the sizes of their host minerals in CAIs, which indicates common cooling rates.

  15. Using the Moon as a low-noise seismic detector for strange quark nuggets

    Energy Technology Data Exchange (ETDEWEB)

    Banerdt, W. Bruce [Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA 91109 (United States); Chui, Talso [Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA 91109 (United States)], E-mail: talso.c.chui@jpl.nasa.gov; Griggs, Cornelius E. [Physics Department, University of Maryland, College Park, MD 20742 (United States); Herrin, Eugene T. [Department of Geology, Southern Methodist University, Dallas, TX 75275 (United States); Nakamura, Yosio [Institute for Geophysics, University of Texas at Austin, Austin, TX 78759-8500 (United States); Paik, Ho Jung [Physics Department, University of Maryland, College Park, MD 20742 (United States); Penanen, Konstantin [Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA 91109 (United States); Rosenbaum, Doris [Physics Department, Southern Methodist University, Dallas, TX 75275 (United States); Teplitz, Vigdor L. [Physics Department, Southern Methodist University, Dallas, TX 75275 (United States); NASA Goddard Space Flight Center, Greenbelt, MD 20771 (United States); Young, Joseph [Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA 91109 (United States)

    2007-04-15

    Strange quark matter made of up, down and strange quarks has been postulated by Witten [E. Witten, Phys. Rev D 30 (1984) 279]. Strange quark matter would be nearly charge neutral and would have density of nuclear matter (10{sup 14} gm/cm{sup 3}). Witten also suggested that nuggets of strange quark matter, or strange quark nuggets (SQNs), could have formed shortly after the Big Bang, and that they would be viable candidates for cold dark matter. As suggested by de Rujula and Glashow [A. de Rujula and S. Glashow, Nature 312 (1984) 734], an SQN may pass through a celestial body releasing detectable seismic energy along a straight line. The Moon, being much quieter seismically than the Earth, would be a favorable place to search for such events. We review previous searches for SQNs to illustrate the parameter space explored by using the Moon as a low-noise detector of SQNs. We also discuss possible detection schemes using a single seismometer, and using an International Lunar Seismic Network.

  16. Axion field and the quark nugget's formation at the QCD phase transition

    CERN Document Server

    Liang, Xunyu

    2016-01-01

    We study a testable dark matter (DM) model outside of the standard WIMP paradigm in which the observed ratio $\\Omega_{\\rm dark} \\simeq \\Omega_{\\rm visible}$ for visible and dark matter densities finds its natural explanation as a result of their common QCD origin when both types of matter (DM and visible) are formed at the QCD phase transition and both are proportional to $\\Lambda_{\\rm QCD}$. Instead of conventional "baryogenesis" mechanism we advocate a paradigm when the "baryogenesis" is actually a charge separation process which always occur in the presence of the $\\cal{CP}$ odd axion field $a(x)$. In this scenario the global baryon number of the Universe remains zero, while the unobserved anti-baryon charge is hidden in form of heavy nuggets, similar to Witten's strangelets and compromise the DM of the Universe. We argue that the nuggets will be inevitably produced during the QCD phase transition as a result of Kibble-Zurek mechanism on formation of the topological defects during a phase transition. Relev...

  17. Compaction and Quenching of High-z Galaxies: Blue and Red Nuggets in Cosmological Simulations

    CERN Document Server

    Zolotov, Adi; Mandelker, Nir; Tweed, Dylan; Inoue, Shigeki; DeGraf, Colin; Ceverino, Daniel; Primack, Joel

    2014-01-01

    We use cosmological simulations to study a characteristic evolution pattern of high redshift galaxies. Early, stream-fed, highly perturbed, gas-rich discs undergo phases of dissipative contraction into compact, star-forming systems (blue nuggets) at z~4-2. The peak of gas compaction marks the onset of central gas depletion and inside-out quenching into compact ellipticals (red nuggets) by z~2. These are sometimes surrounded by gas rings or grow extended dry stellar envelopes. The compaction occurs at a roughly constant specific star-formation rate (SFR), and the quenching occurs at a constant stellar surface density within the inner kpc (Sigma_1). Massive galaxies quench earlier, faster, and at a higher Sigma_1 than lower-mass galaxies, which compactify and attempt to quench more than once. This evolution pattern is consistent with the way galaxies populate the SFR-radius-mass space, and with gradients and scatter across the main sequence. The compaction is triggered by an intense inflow episode, involving me...

  18. Quality evaluation of functional chicken nuggets incorporated with ground carrot and mashed sweet potato.

    Science.gov (United States)

    Bhosale, S S; Biswas, A K; Sahoo, J; Chatli, M K; Sharma, D K; Sikka, S S

    2011-06-01

    This study was envisaged to evaluate the effect of ground raw carrot (0%, 5%, 10% and 15%) and mashed sweet potato (0%, 5%, 10% and 15%) as functional ingredients on the quality of chicken meat nuggets. The products were evaluated for physicochemical quality, proximate composition, nutritive value, sensory quality as well as color and texture profile analyses. Additions of either raw carrot or mashed sweet potato represent an improvement in the nutritional value and have some beneficial effects due to the presence of dietary fibers and β-carotene. They were also found to be effective in sustaining the desired cooking yield and emulsion stability. Treated samples showed lower (p > 0.05) protein, fat and ash contents but higher (p < 0.05) moisture content than control. There were differences among the nugget samples with respect to sensory qualities, and control samples as well as samples with 10% added carrot/sweet potato had higher overall acceptability scores. Hunter color values (L*, a* and b* values) were higher (p < 0.05) for both the formulated products, while their textural parameters were nearly unchanged. In conclusion, carrot and sweet potato at 10% added level have greater potential as good source of dietary fibers and β-carotene and may find their way in meat industry.

  19. Effect of different format-solvent rosemary extracts (Rosmarinus officinalis) on frozen chicken nuggets quality.

    Science.gov (United States)

    Rocío Teruel, M; Garrido, M Dolores; Espinosa, Miriam C; Linares, M Belén

    2015-04-01

    Three kinds of Rosmarinus officinalis extract (powder-acetone, liquid-methanol, liquid-acetone) were used to examine the effects of format-solvent on the active compounds extracted (total phenolic, carnosol and carnosic acid content) and antioxidant activity (FRAP, ABTS). The results showed that both, as the format but also the solvent used, had significant effect on the parameters analyzed (p < 0.05). The highest antioxidant activity was found for the powder-acetone extract followed by the liquid methanol and liquid acetone extracts (p < 0.05). The effect of the three different extracts on the physical-chemical and sensory quality of frozen chicken nuggets was evaluated. At the dose proposed by the European Union Directive 2010/69/EU for the carnosic and carnosol compounds [150 ppm (mg/kg fat basic)], the format-solvent combination of the rosemary extracts used did not modify the chicken nuggets quality characteristics (pH, colour, sensory quality) and still underlines the effectiveness of these extracts.

  20. Thermal maturity assessment of the Upper Triassic to Lower Jurassic Nampo Group, mid-west Korea: Reconstruction of thermal history

    Energy Technology Data Exchange (ETDEWEB)

    Egawa, K.; Il Lee, Y. [Seoul National University, Seoul (Republic of Korea). School of Earth & Environmental Science

    2008-03-15

    Thermal maturity of the Upper Triassic to Lower Jurassic Nampo Group, a sediment-fill of the Chungnam Basin located in the central western part of South Korea, was assessed by illite crystallinity measurement and sandstone microtexture analysis. The Nampo Group consists of a fluvio-lacustrine deposit bearing meta-anthracitic coals and was over-thrusted by the basement rocks. Sandstones are characterized by down sequence increasing illite crystallinity, from anchizone to epizone, which is strongly suggestive of burial heating. Deep-burial diagenesis and deformation are evidenced by well-developed pressure solution textures, whose intensity tends to increase down sequence, and by ductile deformation in the lowermost strata. On the basis of the result of illite crystallinity measurement, the maximum paleo-temperature and total burial depth of the Nampo Group are estimated to be ca 340{sup o}C and 10 km, respectively; these conditions are in good agreement with the observed ductile deformation features. The absence of strata younger than the Nampo Group in and around the Chungnam Basin suggests that deep burial of the Nampo Group was caused by tectonic crustal loading. The tectonic overload was because of basement over-thrusting that occurred during the Jurassic Daebo orogeny, which is closely related to the orthogonal subduction of the Izanagi Plate beneath the East Asian continent. Subsequent hydrothermal alteration disturbed the thermal maturity pattern, resulting in anomalously high illite crystallinity and meta-anthracitization.

  1. Experimental strain analysis of Clarens Sandstone colonised by endolithic lichens

    Directory of Open Access Journals (Sweden)

    D. Wessels

    1995-09-01

    Full Text Available Endolithic lichens occur commonly on Clarens Sandstone in South Africa, where they significantly contribute to the weathering of sandstone by means of mechanical and chemical weathering processes. This preliminary investigation reports on the success- ful use of strain gauges in detecting strain differences between sandstone without epilithic lichens and sandstone colonised by the euendolithic lichen Lecidea aff. sarcogynoides Korb. Mechanical weathering, expressed as strain changes, in Clarens Sandstone was studied during the transition from relatively dry winter to wet summer conditions. Daily weathering of sandstone due to thermal expansion and contraction of colonised and uncolonised sandstone could be shown. Our results show that liquid water in sandstone enhances the mechanical weathering of uncolonised Clarens Sandstone while water in the gaseous phase enhances mechanical weathering of sandstone by euendolithic lichens.

  2. Didactyl tracks of paravian theropods (Maniraptora from the ?Middle Jurassic of Africa.

    Directory of Open Access Journals (Sweden)

    Alexander Mudroch

    Full Text Available BACKGROUND: A new dinosaur tracksite from ?Middle Jurassic sediments of the Irhazer Group on the plains of Agadez (Rep. Niger, northwest Africa revealed extraordinarily well preserved didactyl tracks of a digitigrade bipedal trackmaker. The distinct morphology of the pes imprints indicates a theropod trackmaker from a paravian maniraptoran closely related to birds. METHODOLOGY/PRINCIPAL FINDINGS: The early age and the morphological traits of the tracks allow for description of the new ichnotaxon Paravipus didactyloides. A total of 120 tracks are assigned to 5 individual trackways. The 'medium-sized' tracks with an average footprint length of 27.5 cm and footprint width of 23.1 cm are deeply imprinted into the track bearing sandstone. CONCLUSIONS/SIGNIFICANCE: A comparison with other didactyl tracks gives new insights into the foot morphology of advanced maniraptoran theropods and contributes to knowledge of their evolutionary history. The new ichnotaxon takes an important position in the ichnological fossil record of Gondwana and the mid-Jurassic biota worldwide, because it is among the earliest known records of paravian maniraptorans and of didactyl theropod tracks from Africa.

  3. Bird-like anatomy, posture, and behavior revealed by an early jurassic theropod dinosaur resting trace

    Science.gov (United States)

    Milner, A.R.C.; Harris, J.D.; Lockley, M.G.; Kirkland, J.I.; Matthews, N.A.

    2009-01-01

    Background: Fossil tracks made by non-avian theropod dinosaurs commonly reflect the habitual bipedal stance retained in living birds. Only rarely-captured behaviors, such as crouching, might create impressions made by the hands. Such tracks provide valuable information concerning the often poorly understood functional morphology of the early theropod forelimb. Methodology/Principal Findings: Here we describe a well-preserved theropod trackway in a Lower Jurassic (???198 millionyear- old) lacustrine beach sandstone in the Whitmore Point Member of the Moenave Formation in southwestern Utah. The trackway consists of prints of typical morphology, intermittent tail drags and, unusually, traces made by the animal resting on the substrate in a posture very similar to modern birds. The resting trace includes symmetrical pes impressions and well-defined impressions made by both hands, the tail, and the ischial callosity. Conclusions/Significance: The manus impressions corroborate that early theropods, like later birds, held their palms facing medially, in contrast to manus prints previously attributed to theropods that have forward-pointing digits. Both the symmetrical resting posture and the medially-facing palms therefore evolved by the Early Jurassic, much earlier in the theropod lineage than previously recognized, and may characterize all theropods.

  4. Bird-Like Anatomy, Posture, and Behavior Revealed by an Early Jurassic Theropod Dinosaur Resting Trace

    Science.gov (United States)

    Milner, Andrew R. C.; Harris, Jerald D.; Lockley, Martin G.; Kirkland, James I.; Matthews, Neffra A.

    2009-01-01

    Background Fossil tracks made by non-avian theropod dinosaurs commonly reflect the habitual bipedal stance retained in living birds. Only rarely-captured behaviors, such as crouching, might create impressions made by the hands. Such tracks provide valuable information concerning the often poorly understood functional morphology of the early theropod forelimb. Methodology/Principal Findings Here we describe a well-preserved theropod trackway in a Lower Jurassic (∼198 million-year-old) lacustrine beach sandstone in the Whitmore Point Member of the Moenave Formation in southwestern Utah. The trackway consists of prints of typical morphology, intermittent tail drags and, unusually, traces made by the animal resting on the substrate in a posture very similar to modern birds. The resting trace includes symmetrical pes impressions and well-defined impressions made by both hands, the tail, and the ischial callosity. Conclusions/Significance The manus impressions corroborate that early theropods, like later birds, held their palms facing medially, in contrast to manus prints previously attributed to theropods that have forward-pointing digits. Both the symmetrical resting posture and the medially-facing palms therefore evolved by the Early Jurassic, much earlier in the theropod lineage than previously recognized, and may characterize all theropods. PMID:19259260

  5. Bird-like anatomy, posture, and behavior revealed by an early jurassic theropod dinosaur resting trace.

    Directory of Open Access Journals (Sweden)

    Andrew R C Milner

    Full Text Available BACKGROUND: Fossil tracks made by non-avian theropod dinosaurs commonly reflect the habitual bipedal stance retained in living birds. Only rarely-captured behaviors, such as crouching, might create impressions made by the hands. Such tracks provide valuable information concerning the often poorly understood functional morphology of the early theropod forelimb. METHODOLOGY/PRINCIPAL FINDINGS: Here we describe a well-preserved theropod trackway in a Lower Jurassic ( approximately 198 million-year-old lacustrine beach sandstone in the Whitmore Point Member of the Moenave Formation in southwestern Utah. The trackway consists of prints of typical morphology, intermittent tail drags and, unusually, traces made by the animal resting on the substrate in a posture very similar to modern birds. The resting trace includes symmetrical pes impressions and well-defined impressions made by both hands, the tail, and the ischial callosity. CONCLUSIONS/SIGNIFICANCE: The manus impressions corroborate that early theropods, like later birds, held their palms facing medially, in contrast to manus prints previously attributed to theropods that have forward-pointing digits. Both the symmetrical resting posture and the medially-facing palms therefore evolved by the Early Jurassic, much earlier in the theropod lineage than previously recognized, and may characterize all theropods.

  6. "Sydney sandstone": Heritage Stone from Australia

    Science.gov (United States)

    Cooper, Barry; Kramar, Sabina

    2014-05-01

    Sydney is Australia's oldest city being founded in 1788. The city was fortunate to be established on an extensive and a relatively undeformed layer of lithified quartz sandstone of Triassic age that has proved to be an ideal building stone. The stone has been long identified by geologists as the Hawkesbury Sandstone. On the other hand the term "Sydney sandstone" has also been widely used over a long period, even to the extent of being utilised as the title of published books, so its formal designation as a heritage stone will immediately formalise this term. The oldest international usage is believed to be its use in the construction of the Stone Store at Kerikeri, New Zealand (1832-1836). In the late 19th century, public buildings such as hospitals, court houses as well as the prominent Sydney Town Hall, Sydney General Post Office, Art Gallery of New South Wales, State Library of New South Wales as well as numerous schools, churches, office building buildings, University, hotels, houses, retaining walls were all constructed using Sydney sandstone. Innumerable sculptures utilising the gold-coloured stone also embellished the city ranging from decorative friezes and capitals on building to significant monuments. Also in the late 19th and early 20th century, Sydney sandstone was used for major construction in most other major Australian cities especially Melbourne, Adelaide and Brisbane to the extent that complaints were expressed that suitable local stone materials were being neglected. Quarrying of Sydney sandstone continues today. In 2000 it was recorded noted that there were 33 significant operating Sydney sandstone quarries including aggregate and dimension stone operations. In addition sandstone continues to be sourced today from construction sites across the city area. Today major dimension stone producers (eg Gosford Quarries) sell Sydney sandstone not only into the Sydney market but also on national and international markets as cladding and paving products

  7. Fission track dating of mesozoic sandstones and its tectonic significance in the Eastern Sichuan Basin, China

    Energy Technology Data Exchange (ETDEWEB)

    Shen Chuanbo, E-mail: cugshen@yahoo.c [Key Laboratory of Tectonics and Petroleum Resources, China University of Geosciences, Ministry of Education, Wuhan 430074 (China); Faculty of Earth Resources, China University of Geosciences, Wuhan, Hubei Province 430074 (China); Mei Lianfu [Key Laboratory of Tectonics and Petroleum Resources, China University of Geosciences, Ministry of Education, Wuhan 430074 (China); Xu Sihuang [Faculty of Earth Resources, China University of Geosciences, Wuhan, Hubei Province 430074 (China)

    2009-10-15

    To establish the tectonic evolution of the eastern Sichuan basin, apatite fission track dating and time-temperature thermal history modeling were carried to analyze on 11 samples collected from Jurassic sandstones. The results indicate that the cooling and exhumation process of the eastern Sichuan basin can be divided into three stages since Cretaceous, (1) a rapid cooling phase between approx100 and approx70 Ma, (2) following by a period of relative thermal stability phase between approx70 and approx15 Ma, (3) and then a new rapid cooling stage after approx15 Ma. Two rapid cooling events imply that the eastern Sichuan basin once underwent two tectonic movements since Cretaceous. The first rapid cooling is associated with Mesozoic tectonic reactivation beginning at 100 Ma, which result in folds and faults of the eastern Sichuan basin. The second tectonic movement occurred at 15 Ma, which is related to denudation by compression resulting from the eastward growth of Tibetan plateau uplift.

  8. A geological overview of the Panuke field reservoir sandstones, offshore Nova Scotia

    Energy Technology Data Exchange (ETDEWEB)

    Hogg, J.R.; DeLong, I.D. [PanCanadian Petroleum Ltd., Calgary, AB (Canada)

    1998-09-01

    The Panuke oil field, discovered in 1986, was one of the first producing fields in the Canadian offshore with first oil in 1992. The field is associated with the Scotian Basin, an early Cretaceous reservoir with porosity ranging from 20 to 26 per cent and permeability from 500 to 2000 md. The Cohasset and Panuke fields combined, produce an average of 4500 m{sup 3}/d of high gravity oil with a gas-oil ratio of 17 m{sup 3}/m{sup 3}. Migration of the hydrocarbons into the structure is believed to be through a listric normal fault formed by differential subsidence of the Cretaceous sediments over the Jurassic bank edge. Details of the sedimentology and the stratigraphic relationship of the reservoir sandstones of the Panuke field are provided. 4 figs.

  9. Quality of Low Fat Chicken Nuggets: Effect of Sodium Chloride Replacement and Added Chickpea (Cicer arietinum L.) Hull Flour.

    Science.gov (United States)

    Verma, Arun K; Banerjee, Rituparna; Sharma, B D

    2012-02-01

    While attempting to develop low salt, low fat and high fibre chicken nuggets, the effect of partial (40%) common salt substitution and incorporation of chickpea hull flour (CHF) at three different levels viz., 5, 7.5 and 10% (Treatments) in pre-standardized low fat chicken nuggets (Control) were observed. Common salt replacement with salt substitute blend led to a significant decrease in pH, emulsion stability, moisture, ash, hardness, cohesiveness, gumminess and chewiness values while incorporation of CHF in low salt, low fat products resulted in decreased emulsion stability, cooking yield, moisture, protein, ash, color values, however dietary fibre and textural properties were increased (p<0.01). Lipid profile revealed a decrease in total cholesterol and glycolipid contents with the incorporation of CHF (p<0.01). All the sensory attributes except appearance and flavor, remained unaffected with salt replacement, while addition of CHF resulted in lower sensory scores (p<0.01). Among low salt, low fat chicken nuggets with CHF, incorporation CHF at 5% level was found optimum having sensory ratings close to very good. Thus most acceptable low salt, low fat and high fibre chicken nuggets could be developed by a salt replacement blend and addition of 5% CHF.

  10. CO2-Driven Convection Produced the Vertical Distribution of Sandstone Colors and Iron Concretions in Navajo Sandstone at Zion National Park, Utah (USA)

    Science.gov (United States)

    Kettler, R. M.; Loope, D. B.

    2011-12-01

    Along cliff faces exposed in Zion National Park (SW Utah), the porous and permeable Navajo Sandstone (Jurassic) is 700 m thick, and is capped by impermeable mudrocks and evaporites of the Carmel Formation. Previous workers have documented an areally extensive color pattern that is easily visible across much of southwestern and south-central Utah: the uppermost Navajo Sandstone is nearly white, the middle third of the formation is pink, and the lowermost fraction is reddish brown. To the northwest of the park, however, the formation is uniformly red (likely its primary color; G.B. Nielsen et al., 2009). Spheroidal concretions with dense, iron-oxide-cemented rinds and iron-poor cores are abundant in the pink and brown sandstones. Rhomb-shaped clots of iron oxide cement that are pseudomorphous after siderite are present in the cores of the largest concretions. The color variations are evidence that iron was transported from the upper portion of the Navajo SS to the lower portion. The pseudomorphs are evidence that the concretions are the oxidized remains of siderite-cemented precursors. The vertical iron transport and the precipitation of siderite require similar vertical transport of reducing, CO2-rich formation waters through the Navajo Sandstone. We argue that this circulation was driven in part by groundwater convection beneath a CO2 accumulation that was trapped below the Navajo-Carmel contact. This circulation caused aqueous iron and aqueous carbonate to be displaced downward and to accumulate (in the form of siderite) in the lower Navajo Sandstone. There are numerous CO2 reservoirs in the Colorado Plateau region; the gas was derived mainly from mantle sources. We hypothesize that, in the late Tertiary, the Carmel Formation capped a broad, structurally high accumulation of CO2 and CH4 in the Navajo Sandstone. The CH4 bleached the upper portion of the sandstone, releasing Fe2+ into the formation water. CO2 dissolved in the water, thereby increasing its density

  11. Paleomagnetic study of Jurassic and Cretaceous rocks from the Mixteca terrane (Mexico)

    Science.gov (United States)

    Böhnel, Harald

    1999-11-01

    Three sites from Cretaceous limestone and Jurassic sandstone in northern Oaxaca, Mexico, were studied paleomagnetically. Thermal demagnetization isolated site-mean remanence directions which differ significantly from the recent geomagnetic field. The paleopole for the Albian-Cenomanian Morelos formation is indistinguishable from the corresponding reference pole for stable North America, indicating tectonic stability of the Mixteca terrane since the Cretaceous. Rock magnetic properties and a positive reversal test for the Bajocian Tecomazuchil sandstone suggest that the remanence could be of primary origin, although no fold test could be applied. The Tecomazuchil paleopole is rotated 10°±5° clockwise and displaced 24°±5° towards the study area, with respect to the reference pole for stable North America. Similar values were found for the Toarcien-Aalenian Rosario Formation, with 35°±6° clockwise rotation and 33°±6° latitudinal translation. These data support a post-Bajocian southward translation of the Mixteca terrane by around 25°, which was completed in mid-Cretaceous time.

  12. Axion field and the quark nugget's formation at the QCD phase transition

    Science.gov (United States)

    Liang, Xunyu; Zhitnitsky, Ariel

    2016-10-01

    We study a testable dark-matter (DM) model outside of the standard weakly interacting massive particle paradigm in which the observed ratio Ωdark≃Ωvisible for visible and dark-matter densities finds its natural explanation as a result of their common QCD origin when both types of matter (DM and visible) are formed at the QCD phase transition and both are proportional to ΛQCD. Instead of the conventional "baryogenesis" mechanism, we advocate a paradigm when the "baryogenesis" is actually a charge separation process which always occurs in the presence of the C P odd axion field a (x ). In this scenario, the global baryon number of the Universe remains zero, while the unobserved antibaryon charge is hidden in the form of heavy nuggets, similar to Witten's strangelets and compromise the DM of the Universe. In the present work, we study in great detail a possible formation mechanism of such macroscopically large heavy objects. We argue that the nuggets will be inevitably produced during the QCD phase transition as a result of Kibble-Zurek mechanism on formation of the topological defects during a phase transition. Relevant topological defects in our scenario are the closed bubbles made of the NDW=1 axion domain walls. These bubbles, in general, accrete the baryon (or antibaryon) charge, which eventually results in the formation of the nuggets and antinuggets carrying a huge baryon (antibaryon) charge. A typical size and the baryon charge of these macroscopically large objects are mainly determined by the axion mass ma. However, the main consequence of the model, Ωdark≈Ωvisible, is insensitive to the axion mass which may assume any value within the observationally allowed window 10-6 eV ≲ma≲10-3 eV . We also estimate the baryon-to-entropy ratio η ≡nB/nγ˜10-10 within this scenario. Finally, we comment on implications of these results to the axion search experiments, including the microwave cavity and the Orpheus experiments.

  13. The geological constraints of the development of sandstone landforms in Central Europe, a case study of the Świętokrzyskie (Holy Cross) Mountains, Poland

    Science.gov (United States)

    Urban, Jan

    2016-12-01

    Eighty sites of crag groups and individual crags occurring in the Świętokrzyskie (Holy Cross) Mts., upland situated in central Poland, were described in detail in order to examine the lithological, structural, mechanic properties and the tectonic features of sandstones and quartzites representing six crag-forming lithostratigraphic units: Cambrian quartzites, Devonian quartzitic sandstones, Triassic and Jurassic sandstones. Specific features of these rocks are: their occurrence within the sequences consisting of different rock series, high energy depositional environments and siliceous composition. The cragforming rocks differ in the amount of cement (from strongly cemented quartzites to very porous sandstones with poor cement), which determines the diverse mechanical properties (from very strong to friable rocks). The crucial feature enabling formation of crags built of porous and friable sandstones is very dense grain packing due to chemical and mechanical compaction. Regarding the principal role of the gravitational disintegration of rock massifs under the periglacial conditions in the Late Pleistocene, other factors constraining the crag formation and shaping are: the tectonic situation of rocks (the orientation of strata and joints) as well as adequate joint spacing and bed thickness. Petrographic, structural and tectonic features are interrelated.

  14. Lithological and Petrographic Analyses of Carbonates and Sandstones From the Southern Gulf of Mexico

    Science.gov (United States)

    Garcia-Avendaño, A.; Urrutia-Fucugauchi, J.

    2012-04-01

    We present results of sedimentological and petrological studies of drill cores from the Bay of Campeche in the southern Gulf of Mexico. Based on reports on drill cores obtained from oil exploratory wells in the Cantarell Complex located 80 kilometres offshore in the Bay of Campeche and studies related to regional geology composite simplified stratigraphic columns for offshore Campeche region have been constructed up to depths of approximately 5000 m. The stratigraphic column is formed by a thick sediment sequence of Middle Jurassic age (evaporites, Callovian), Late Jurassic (terrigenous, calcareous clays and calcareous layers), Lower Cretaceous (carbonates), Upper Cretaceous-Paleogene (calcareous breccias), Paleogene-Neogene (terrigenous-carbonates intercalations) and Quaternary (terrigenous). The core samples studied come from wells in the Sihil and Akal fields in Cantarell. Analysis of reports on lithological descriptions indicates that these wells sample dolomitized sedimentary breccias from the Upper Cretaceous-Paleocene and fine-grained sandstones from the Late Jurassic Tithonian, respectively. Based on results of petrographic studies, the texture, cementing material and porosity of the units have been documented. The thin sections for carbonates were classified based on their texture according to Dunham (1962) for carbonate rocks, classified according to their components using the ternary diagrams of Folk (1974). Percentages refer to the data presented in tables, which were obtained by point-counting technique (with a total 250). Photomicrographs of scanning electron microscope (SEM) provide magnification for easy documentation of crystalline arrangements and description of micro-porous for different types of carbonates such as dolomite, in addition to the morphology of authigenic clays. Results of these studies and previous works in the area permit characterization of diagenetic processes of the carbonate sediments in the Campeche Bay, and provide

  15. The formation of nuggets of highly siderophile elements in quenched silicate melts at high temperatures: Before or during the silicate quench?

    Science.gov (United States)

    Malavergne, V.; Charon, E.; Jones, J.; Cordier, P.; Righter, K.; Deldicque, D.; Hennet, L.

    2016-01-01

    The Highly Siderophile Elements (HSE) are powerful tracers of planetary differentiation. Despite the importance of their partitioning between silicate and metal for the understanding of planetary core formation, especially for the Earth and Mars, there is still a huge discrepancy between conclusions based on different high temperature (HT) experimental studies. These disagreements may be due to the presence of HSE micro and nanonuggets in HT experiments. The formation of these nuggets is still interpreted in different ways. One hypothesis is that these HSE nuggets formed during the quench of the silicate melt, while another hypothesis supposes that these nuggets formed before the quench and represented artefacts of HT experiments. The goal of this work is to clarify whether the presence of HSE nuggets in silicate melts is linked to a quench effect or not. Understanding the formation of these HSE nuggets represents thus a necessary step towards the resolution of the Earth's core formation scenarios. We performed new HT experiments (1275-2000 °C) at different oxygen fugacities (fO2), between ambient air up to ∼5 log units below the Iron-Wüstite buffer [IW-5], for two different silicate compositions (synthetic martian and terrestrial basalts) mixed with a metallic mixture of Pt-Au-Pd-Ru. Our 1275-1600 °C experiments were contained in either olivine, diopside or graphite crucible; experiments at 2000 °C were performed using a levitation method, so no capsule was necessary. Our samples contained quenched silicate melts, minerals (olivine, pyroxene, spinel depending on the run), a two-phase metallic bead and nano and micro-nuggets of HSE. Our samples underwent fine textural, structural and analytical characterizations. The distribution of the nuggets was not homogeneous throughout the quenched silicate melt. HSE nuggets were present within crystals. Dendritic textures from the quenched silicate melt formed around HSE nuggets, which could be crystallized, showing

  16. Total petroleum systems of the Pelagian Province, Tunisia, Libya, Italy, and Malta; the Bou Dabbous, Tertiary and Jurassic-Cretaceous composite

    Science.gov (United States)

    Klett, T.R.

    2001-01-01

    Undiscovered conventional oil and gas resources were assessed within total petroleum systems of the Pelagian Province (2048) as part of the U.S. Geological Survey World Petroleum Assessment 2000. The Pelagian Province is located mainly in eastern Tunisia and northwestern Libya. Small portions of the province extend into Malta and offshore Italy. Although several petroleum systems may exist, only two ?composite? total petroleum systems were identified. Each total petroleum system comprises a single assessment unit. These total petroleum systems are called the Bou Dabbous?Tertiary and Jurassic-Cretaceous Composite, named after the source-rock intervals and reservoir-rock ages. The main source rocks include mudstone of the Eocene Bou Dabbous Formation; Cretaceous Bahloul, Lower Fahdene, and M?Cherga Formations; and Jurassic Nara Formation. Known reservoirs are in carbonate rocks and sandstone intervals throughout the Upper Jurassic, Cretaceous, and Tertiary sections. Traps for known accumulations include fault blocks, low-amplitude anticlines, high-amplitude anticlines associated with reverse faults, wrench fault structures, and stratigraphic traps. The estimated means of the undiscovered conventional petroleum volumes in total petroleum systems of the Pelagian Province are as follows: [MMBO, million barrels of oil; BCFG, billion cubic feet of gas; MMBNGL, million barrels of natural gas liquids] Total Petroleum System MMBO BCFG MMBNGL Bou Dabbous?Tertiary 667 2,746 64 Jurassic-Cretaceous Composite 403 2,280 27

  17. A detrital record of continent-continent collision in the Early-Middle Jurassic foreland sequence in the northern Yangtze foreland basin, South China

    Science.gov (United States)

    Qian, Tao; Liu, Shaofeng; Wang, Zongxiu; Li, Wangpeng; Chen, Xinlu

    2016-12-01

    The Mesozoic northern Yangtze foreland basin system was formed by continental collision between the North China and South China plates along the Mianlue suture. Synorogenic stratigraphic sequences of Late Triassic to Early-Middle Jurassic age were developed in the northern Yangtze foreland basin. The upper Middle Jurassic Shaximiao Formation consists mainly of thick-bedded terrestrial successions that serve as the main body of the basin-filling sequences, suggesting intense tectonism in the peripheral orogeny of the foreland basin. Laser-ICP-MS U-Pb analysis of 254 detrital zircon grains from sandstone samples and several published Lower-Middle Jurassic samples, detrital compositions, petrofacies, and paleocurrent reconstructions in the northern Yangtze foreland basin indicate that discrete source areas included the Qinling-Dabieshan ranges and the Mianlue suture zone to the north, and the South China plate to the south. The stratigraphic succession and sediment provenance of the foreland basin imply that the early Mianlue oceanic basin, magmatic arc, and nonmarine molasse foreland basin during the period of deposition were modified or buried by the subsequent continent-continent collision between the North China-Qinling-Dabieshan plate and the Yangtze plate during the Jurassic, which followed the oblique amalgamation between these plates during the Middle-Late Triassic.

  18. Spatially varying cross-correlation coefficients in the presence of nugget effects

    KAUST Repository

    Kleiber, William

    2012-11-29

    We derive sufficient conditions for the cross-correlation coefficient of a multivariate spatial process to vary with location when the spatial model is augmented with nugget effects. The derived class is valid for any choice of covariance functions, and yields substantial flexibility between multiple processes. The key is to identify the cross-correlation coefficient matrix with a contraction matrix, which can be either diagonal, implying a parsimonious formulation, or a fully general contraction matrix, yielding greater flexibility but added model complexity. We illustrate the approach with a bivariate minimum and maximum temperature dataset in Colorado, allowing the two variables to be positively correlated at low elevations and nearly independent at high elevations, while still yielding a positive definite covariance matrix. © 2012 Biometrika Trust.

  19. Evaluation of process parameters in the industrial scale production of fish nuggets

    Directory of Open Access Journals (Sweden)

    Adriane da Silva

    2011-06-01

    Full Text Available This work reports the use of experimental design for the assessment of the effects of process parameters on the production of fish nuggets in an industrial scale environment. The effect of independent factors on the physicochemical and microbiological parameters was investigated through a full 24 experimental design. The studied factors included the temperature of fish fillet and pulp in the mixer, the temperature of the added fat, the temperature of water and the ratio of protein extraction time to emulsion time. The physicochemical analyses showed that the higher temperature of the pulp and fillet of fish, the lower the protein in the final product. Microbiological analyses revealed that the counting of Staphylococcus coagulase positive, total and thermo-tolerant coliforms were in accordance with the current legislation.

  20. Dark Matter searches using gravitational wave bar detectors: quark nuggets and newtorites

    CERN Document Server

    Bassan, M; D'Antonio, S.; Fafone, V.; Giordano, G.; Marini, A.; Minenkov, Y.; Modena, I.; Pallottino, G.V.; Pizzella, G.; Rocchi, A.; Ronga, F.; Visco, M.

    2016-01-01

    Many experiments have searched for supersymmetric WIMP dark matter, with null results. This may suggest to look for more exotic possibilities, for example compact ultra-dense quark nuggets, widely discussed in literature with several different names. Nuclearites are an example of candidate compact objects with atomic size cross section. After a short discussion on nuclearites, the result of a nuclearite search with the gravitational wave bar detectors Nautilus and Explorer is reported. The geometrical acceptance of the bar detectors is 19.5 $\\rm m^2$ sr, that is smaller than that of other detectors used for similar searches. However, the detection mechanism is completely different and is more straightforward than in other detectors. The experimental limits we obtain are of interest because, for nuclearites of mass less than $10^{-5}$ g, we find a flux smaller than that one predicted considering nuclearites as dark matter candidates. Particles with gravitational only interactions (newtorites) are another examp...

  1. Quark nugget dark matter: no contradiction with 511 keV line emission from dwarf galaxies

    Science.gov (United States)

    Lawson, Kyle; Zhitnitsky, Ariel

    2017-02-01

    The observed galactic 511 keV line has been interpreted in a number of papers as a possible signal of dark matter annihilation within the galactic bulge. If this is the case then it is possible that a similar spectral feature may be observed in association with nearby dwarf galaxies. These objects are believed to be strongly dark matter dominated and present a relatively clean observational target. Recently INTEGRAL observations have provided new constraints on the 511 keV flux from nearby dwarf galaxies [1] motivating further investigation into the mechanism by which this radiation may arise. In the model presented here dark matter in the form of heavy quark nuggets produces the galactic 511 keV emission line through interactions with the visible matter. It is argued that this type of interaction is not strongly constrained by the flux limits reported in [2].

  2. Cross-bedding Related Anisotropy and its Role in the Orientation of Joints in an Aeolian Sandstone

    Science.gov (United States)

    Deng, S.; Cilona, A.; Mapeli, C.; Panfilau, A.; Aydin, A.; Prasad, M.

    2014-12-01

    Previous research revealed that the cross-bedding related anisotropy in aeolian sandstones affects the orientation of compaction bands, also known as anticracks. We hypothesize that cross-bedding should a have similar influence on the orientation of the joints within the same rock at the same location. To test this hypothesis, we investigated the relationship between the cross-beds and the cross-bed package confined joints in the Jurassic aeolian Aztec Sandstone cropping out in the Valley of Fire State Park, Nevada. The field data demonstrates that the cross-bed package confined joints occur at high-angle to bedding and trend roughly parallel to the dip direction of the cross-beds. This shows that the cross-bed orientation and the associated anisotropy also exert a strong control on the formation and orientation of the joints. In order to characterize the anisotropy due to cross-bedding in the Aztec Sandstone, we measured the P-wave velocities parallel and perpendicular to bedding from 11 samples in the laboratory using a bench-top ultrasonic assembly. The measured P-wave anisotropy is about 13% on average. Based on these results, a numerical model based on the generalized Hooke's law for anisotropic materials is analyzed assuming the cross-bedded sandstone to be transversely isotropic. Using this model, we tested various cross-bed orientations as well as different strain boundary conditions (uniaxial, axisymmetric and triaxial). It is possible to define a boundary condition under which the modeled results roughly match with the observed relationship between cross-bed package confined joints and cross-beds. These results have important implications for fluid flow through aeolian sandstones in reservoirs and aquifers.

  3. The Jurassic of Denmark and Greenland: The Upper Jurassic of Europe: its subdivision and correlation

    Directory of Open Access Journals (Sweden)

    Zeiss, Arnold

    2003-10-01

    Full Text Available In the last 40 years, the stratigraphy of the Upper Jurassic of Europe has received much attention and considerable revision; much of the impetus behind this endeavour has stemmed from the work of the International Subcommission on Jurassic Stratigraphy. The Upper Jurassic Series consists of three stages, the Oxfordian, Kimmeridgian and Tithonian which are further subdivided into substages, zones and subzones, primarily on the basis of ammonites. Regional variations between the Mediterranean, Submediterranean and Subboreal provinces are discussed and correlation possibilities indicated. The durations of the Oxfordian, Kimmeridgian and Tithonian Stages are reported to have been 5.3, 3.4 and 6.5 Ma, respectively. This review of the present status of Upper Jurassic stratigraphy aids identification of a number of problems of subdivision and definition of Upper Jurassic stages; in particular these include correlation of the base of the Kimmeridgian and the top of the Tithonian between Submediterranean and Subboreal Europe. Although still primarily based on ammonite stratigraphy, subdivision of the Upper Jurassic is increasingly being refined by the incorporation of other fossil groups; these include both megafossils, such as aptychi, belemnites, bivalves, gastropods, brachiopods, echinoderms, corals, sponges and vertebrates, and microfossils such as foraminifera, radiolaria, ciliata, ostracodes, dinoflagellates, calcareous nannofossils, charophyaceae, dasycladaceae, spores and pollen. Important future developments will depend on the detailed integration of these disparate biostratigraphic data and their precise combination with the abundant new data from sequence stratigraphy, utilising the high degree of stratigraphic resolution offered by certain groups of fossils. This article also contains some notes on the recent results of magnetostratigraphy and sequence chronostratigraphy.

  4. Mechanism of formation of wiggly compaction bands in porous sandstone: 1. Observations and conceptual model

    Science.gov (United States)

    Liu, Chun; Pollard, David D.; Deng, Shang; Aydin, Atilla

    2015-12-01

    Field observations are combined with microscopic analyses to investigate the mechanism of formation of wiggly compaction bands (CBs) in the porous Jurassic aeolian Aztec Sandstone exposed at Valley of Fire State Park, Nevada. Among the three types of CBs (T1, T2, and T3), we focused on the wiggly CBs (T3), which show a chevron (T31) or wavy (T32) pattern with typical corner angles of approximately 90° or 130°, respectively. Where corner angles of wiggly CBs increase to 180°, they become straight CBs (T33). Image analyses of thin sections using an optical microscope show host rock porosity increases downslope in this dune, and the predominant type of wiggly CBs also varies from chevron to straight CBs. Specifically, band type varies continuously from chevron to wavy to straight where the porosity and grain sorting of the host rock increase systematically. Based on the crack and anticrack models, we infer that the change from chevron to straight CBs is due to increasing failure angle of the sandstone and this may correlate with increasing grain sorting. Wavy CBs with intermediate failure angle and host rock porosity are an intermediate stage between chevron and straight CBs. Previous sedimentological studies also have suggested that grain size and sorting degree increase downslope on the downwind side of sand dunes due to a sieving process of the wind-blown grains. Therefore, the transition of wiggly CB types in this regard correlates with increasing sorting and perhaps with increasing porosity downslope.

  5. The evolution of faults formed by shearing across joint zones in sandstone

    Science.gov (United States)

    Myers, Rodrick; Aydin, Atilla

    2004-05-01

    The evolution of strike-slip and normal faults formed by slip along joint zones is documented by detailed field studies in the Jurassic Aztec Sandstone in the Valley of Fire State Park, Nevada, USA. Zones of closely spaced planar sub-parallel joints arranged en échelon are sheared, forming faults. Fracturing occurs as a result of shearing, forming new joints. Later shearing along these joints leads to successively formed small faults and newer joints. This process is repeated through many generations of fracturing with increasing fault slip producing a hierarchical array of structures. Strain localization produced by shearing of joint zones at irregularities in joint traces, fracture intersections, and in the span between adjacent sheared joints results in progressive fragmentation of the weakened sandstone, which leads to the formation of gouge along the fault zone. The length and continuity of the gouge and associated slip surfaces is related to the slip magnitude and fault geometry with slip ranging from several millimeters to about 150 m. Distributed damage in a zone surrounding the gouge core is related to the original joint zone configuration (step sense, individual sheared joint overlaps and separation), shear sense, and slip magnitude. Our evolutionary model of fault development helps to explain some outstanding issues concerning complexities in faulting such as, the variability in development of fault rock and fault related fractures, and the failure processes in faults.

  6. Impact Metamorphism of Sandstones at Amguid Crater, Algeria

    Science.gov (United States)

    Sahoui, R.; Belhai, D.

    2016-08-01

    Amguid is a 450 m diameter sample crater; it is emplaced in Lower Devonian sandstones.We have carried out a petrographic study in order to investigate shock effects recorded in these sandstones and define shock stages in Amguid.

  7. Single-grain detrital-muscovite ages from Lower Cretaceous sandstones, Scotian Basin, and their implications for provenance

    Energy Technology Data Exchange (ETDEWEB)

    Reynolds, P.H.; Grist, A.M. [Dalhousie Univ., Halifax, NS (Canada). Dept. of Earth Sciences; Pe-Piper, G. [Saint Mary' s Univ., Halifax, NS (Canada). Dept. of Geology; Piper, D.J.W. [Geological Survey of Canada, Bedford Inst. of Oceanography, Dartmouth, NS (Canada). Atlantic Geoscience Center

    2009-03-15

    Detrital muscovite is relatively abundant in the Lower Cretaceous rocks of the Scotian Basin, where the deltaic sandstones form important gas reservoirs. This paper reported on a study that used the single-grain geochronology dating technique to re-examine the significance of muscovite as a detrital mineral in the Scotian Basin. The objective was to better understand the sources of sediments in the offshore reservoir sandstone and to identify sediment dispersal patterns. Information on the detrital petrology and sediment provenance of the Lower Cretaceous sandstone is important for exploration models and for determining diagenesis and reservoir quality. One hundred muscovite grains were dated from a transect of wells near Sable Island. An additional 17 grains were dated from the Naskapi N-30 well in the western part of the basin. In general, the muscovite ranges in age from ca. 420 to 240 Ma, suggesting that ages were not reset by post-depositional alteration. The principal sources were rocks that had experienced resetting during Alleghenian deformation and Late Triassic, earliest Jurassic rifting. According to the distribution of ages and mass balance calculations, the sources were primarily Meguma metasedimentary rocks on the inner Scotian Shelf. The age distribution at Naskapi N-30 is similar to that in the South Mountain batholith, except for some grains younger than 360 Ma that suggest an offshore source with Alleghenian resetting. This paper also provided evidence that the inner shelf was an erosional area during the Early Cretaceous. 59 refs., 2 tabs., 7 figs., 1 appendix.

  8. Fractures and stresses in Bone Spring sandstones

    Energy Technology Data Exchange (ETDEWEB)

    Lorenz, J.C.; Warpinski, N.R.; Sattler, A.R.; Northrop, D.A.

    1990-09-01

    This project is a collaboration between Sandia National Laboratories and Harvey E. Yates Company being conducted under the auspices of the Oil Recovery Technology Partnership. The project seeks to apply perspectives related to the effects of natural fractures, stress, and sedimentology to the simulation and production of low-permeability gas reservoirs to low-permeability oil reservoirs as typified by the Bone Spring sandstones of the Permian Basin, southeast New Mexico. This report presents the results and analysis obtained in 1989 from 233 ft of oriented core, comprehensive suite of logs, various in situ stress measurements, and detailed well tests conducted in conjunction with the drilling of two development wells. Natural fractures were observed in core and logs in the interbed carbonates, but there was no direct evidence of fractures in the sandstones. However, production tests of the sandstones indicated permeabilities and behavior typical of a dual porosity reservoir. A general northeast trend for the maximum principal horizontal stress was observed in an elastic strain recovery measurements and in strikes of drilling-induced fractures; this direction is subparallel to the principal fracture trend observed in the interbed carbonates. Many of the results presented are believed to be new information for the Bone Spring sandstones. 57 figs., 18 tabs.

  9. Utilization of Solid Waste of Tofu and Out of Grade Carrot as a Source of Vegetable Protein and Fibre in Nugget Processing

    Directory of Open Access Journals (Sweden)

    Evawati Evawati

    2014-01-01

    Full Text Available Tofu residue production is a solid by-product of the tofu industry, which contains high protein and can be processed for food consumption. It has a good taste and is safe to consume as a chicken meat substitute in the form of nuggets they are called de-soya nuggets. One of the methods to decrease bad health effects from fast food is to use tofu nuggets made from the Tofu waste by fortification with local food ingredients that are rich in fiber and antioxidants, similar with out-of-grade carrot. From the research it can be concluded that the substitution of tofu waste and carrot fortifications as de-soya nuggets can increase the nutritional value and fiber of food. Nuggets known as fast foods have high amounts of fat and cholesterols because they are made from animal fat and have low amount fiber. The number of nutritional values that fulfill the standard for a de-soya nugget is, with the largest substitute being of 30% tofu waste with carrot fortifications of 15% that contains 12.53% protein, 30.1% carbohydrate,  11,83% fat, 42.8% water, 1,8700% ash, 8,05% dietary fiber , and  less than 3.0 x 103 (1.8 x 103 colonies/gr total microbial.

  10. Consumer attitudes and behaviours--key risk factors in an outbreak of Salmonella typhimurium phage type 12 infection sourced to chicken nuggets.

    Science.gov (United States)

    Kenny, B; Hall, R; Cameron, S

    1999-04-01

    To identify the source and intervention methods for an outbreak of Salmonella Typhimurium phage type 12 in South Australia. Ten cases of S. Typhimurium phage type (PT) 12 infection were notified in South Australia in a four-week period from 7 May 1998. Nine cases and 27 controls were included in a case control study to test the hypothesis that illness was associated with the consumption of chicken nuggets. A significant association between illness and the consumption of one brand of chicken nuggets was determined, odds ratio undefined (95% CI undefined; p = undefined). Nine of nine cases and one of 27 controls reported eating these chicken nuggets. S. Typhimurium PT 12 was isolated from an opened sample of this particular brand of nuggets which had been retrieved from the home of one case. The implicated nuggets were essentially a raw product which had been 'flash fried' in contrast with other brands which were fully cooked. The investigation highlighted issues of inadequate labelling and consumer responses to labelling information which affect food safety. A media release to highlight to the consumer the need to cook frozen food properly and a voluntary recall of the 'flash fried' product was instigated as a result of these conclusions. Further action is needed to eliminate the potential hazard that consumers will perceive and handle 'flash fried' nuggets as if they are a cooked chicken product.

  11. Architecture and development of the alluvial sediments of the Upper Jurassic Tordillo Formation in the Cañada Ancha Valley, northern Neuquén Basin, Argentina

    Science.gov (United States)

    López-Gómez, José; Martín-Chivelet, Javier; Palma, Ricardo M.

    2009-07-01

    The Upper Jurassic Tordillo Formation at Cañada Ancha area, northern Neuquén Basin, Argentina, comprises a multi-stage suit of predominantly alluvial sediments that is heterolithic in nature. In that suit, several lithofacies, architectural elements, and bounding surfaces of different order have been identified and their lateral and vertical distribution characterized. This analysis allowed the differentiation of 3 main units (lower, middle and upper), 20 subunits (C-1 to C-20), and the characterization of their alluvial styles. The lower unit (which comprises subunits C-1 to C-4) is mainly formed by fine- to medium-grained sandstones, which become medium- to coarse-grained towards the top. These sandstones characterize settings ranging from floodplains with isolated, unconfined flows, to more complex, vertically stacked, multi-storey sheet sandstones of braided fluvial systems. The middle unit (C-5 to C-10) is dominated by pale brown-grey fine-to coarse-grained sands and medium size subangular to angular conglomerates, which reflect amalgamated complexes of sandstone sheets and downstream accretion macroforms. Remarkably, this alluvial sedimentation was episodically punctuated by volcaniclastic flows. The upper unit (C-11 to C-20) consists of finer sediments, mainly pink to white fine-to medium grained sandstones and red to green siltstones. Towards the top, bioturbation becomes important, and also the presence of volcanosedimentary flows is noticeable. Fluvial settings include braided sheet sandstones with waning flood deposits evolving to isolated high-sinuosity fluvial systems, with flash flood deposits. At the top of this unit, facies may suggest marine influence. Vertical changes in the fluvial style result from both climatic and tectonic controls. A semiarid to arid climate and the active tectonism linked to the eastward migration of the Andean volcanic arc determined major bounding surfaces, fluvial style evolution and the presence of the volcano

  12. Effect of natural antioxidants and vacuum packaging on the quality of buffalo meat nuggets during refrigerated storage.

    Science.gov (United States)

    Sahoo, J; Anjaneyulu, A S

    1997-11-01

    Buffalo meat nuggets (BMN) were incorporated with 500 ppm sodium ascorbate, 10 ppm α-tocopherol acetate and 0.5% sodium tripolyphosphate while processing. There were three experimental groups of BMN, namely control aerobic packaged (CAP), treated aerobic packaged (TAP) and treated vacuum packaged (TVP), refrigerated and stored at 4 °C. It was observed that the treated samples (TAP and TVP) had significantly (p vacuum packaging extended the shelf life of BMN from 10 to 30 days under refrigerated storage.

  13. Survival of Penicillium spp. conidia during deep-frying and baking steps of frozen chicken nuggets processing.

    Science.gov (United States)

    Wigmann, Évelin Francine; Moreira, Rafael Chelala; Alvarenga, Verônica Ortiz; Sant'Ana, Anderson S; Copetti, Marina Venturini

    2016-05-01

    This study aimed at determining whether Penicillium spp. strains could survive through the heat treatment applied during the processing of frozen chicken nuggets. Firstly, it was found that the conidia of Penicillium were not able to survive the heat shock in phosphate buffer at pH 7.2 in thermal death tubes (TDT) at 80 °C/30 min. Subsequently, each Penicillium strain was inoculated in frozen chicken nuggets, which were subjected to the following treatments: i) only deep frying (frying oil at 195-200 °C), ii) only baking (120-130 °C until the internal temperature reached 70 °C) and iii) deep frying followed by baking (frying oil temperature of 195-200 °C and baking temperature of 120-130 °C, until the internal temperature reached 70 °C). The results indicated that Penicillium polonicum NGT 23/12, Penicillium commune NGT 16/12, Penicillium solitum NGT 30/12 and Penicillium crustosum NGT 51/12 were able to survive after the combined treatment (deep frying followed by baking) when inoculated in chicken nuggets. P. polonicum NGT 23/12 was the most resistant strain to the combined treatment (deep frying and baking), as its population was reduced by 3 log cycles CFU/g, when the internal temperature reached 78 °C after 10 min and 30 s of baking. The present data show that if Penicillium spp. is present in high numbers in raw materials, such as breading flours, it will survive the thermal processing applied during chicken nuggets production.

  14. Modeling the Middle Jurassic ocean circulation

    Directory of Open Access Journals (Sweden)

    Maura Brunetti

    2015-10-01

    Full Text Available We present coupled ocean–sea-ice simulations of the Middle Jurassic (∼165 Ma when Laurasia and Gondwana began drifting apart and gave rise to the formation of the Atlantic Ocean. Since the opening of the Proto-Caribbean is not well constrained by geological records, configurations with and without an open connection between the Proto-Caribbean and Panthalassa are examined. We use a sea-floor bathymetry obtained by a recently developed three-dimensional (3D elevation model which compiles geological, palaeogeographical and geophysical data. Our original approach consists in coupling this elevation model, which is based on detailed reconstructions of oceanic realms, with a dynamical ocean circulation model. We find that the Middle Jurassic bathymetry of the Central Atlantic and Proto-Caribbean seaway only allows for a weak current of the order of 2 Sv in the upper 1000 m even if the system is open to the west. The effect of closing the western boundary of the Proto-Caribbean is to increase the transport related to barotropic gyres in the southern hemisphere and to change water properties, such as salinity, in the Neo-Tethys. Weak upwelling rates are found in the nascent Atlantic Ocean in the presence of this superficial current and we discuss their compatibility with deep-sea sedimentological records in this region.

  15. Lower Jurassic palynostratigraphy of Eastern Siberia

    Science.gov (United States)

    Goryacheva, A. A.

    2017-05-01

    This paper presents the results of a palynological study of the natural outcrops of the Lower and Middle Jurassic on the Kelimyar River (Outcrops 5, 6, 7, 14, and 16) and two boreholes, Middle-Nakynskaya and Ygyata-Tyungskaya 1, in Eastern Siberia. The Ukugut, Tyung, Motorchuna, Suntar, Kyrin, and Kelimyar formations were studied. Six biostrata with dinocysts were established for the Upper Sinemurian-Toarcian. The analysis of the stratigraphic ranges of dinocysts in the sections allowed the identification of the stratigraphic ranges for important genera of dinocysts, which enabled the updating of the geochronology of some biostrata. Three main stages of the evolution of dinocysts in the Early Jurassic in the Siberian Paleobasin were characterized by the appearance, diversification, and disappearance of some orders of dinocysts at certain times. Seven biostrata (beds with characteristic palynoassemblages) were established for the upper Sinemurian-Toarcian on the basis of the study of the taxonomic composition of spores and pollen of land plants and successive changes in the composition of the palynospectra.

  16. The Jurassic of Denmark and Greenland: The Jurassic of the Netherlands

    Directory of Open Access Journals (Sweden)

    Herngreen, G.F. Waldemar

    2003-10-01

    Full Text Available A recent revision of the lithostratigraphy of the Netherlands has triggered an extensive re-evaluation of existing ideas on the Jurassic structural and depositional history. Significant advances can be attributed to the incorporation of sequence stratigraphic concepts. In the course of the Triassic and Jurassic, structural complexity increased progressively. The Jurassic sedimentary succession can be subdivided into three depositional megasequences. Megasequence I (Rhaetian- Aalenian reflects the period between the so-called early and mid-Cimmerian tectonic phases. Megasequence II (Aalenian - Middle Callovian covers the period of activity of the mid-Cimmerian phase. Megasequence III (Middle Callovian - Ryazanian corresponds with the period between the mid-Cimmerian and late Cimmerian phases (particularly after pulse II. In this latter megasequence, six stages (IIIa-f are recognised. Sediments deposited during the Rhaetian and Ryazanian bear a stronger affinity with the Jurassic succession than with Triassic and Cretaceous sediments respectively. These stages are thus treated here as an integral part of the Jurassic succession. During the Rhaetian-Bajocian the area subsided relatively uniformly. A sheet of predominantly fine-grained marine sediments of great lateral uniformity was deposited. During the Toarcian, in particular, basin circulation was largely restricted. The cooling that followed the thermal Central North Sea dome uplift triggered an important extensional phase during the Aalenian-Callovian. The rift phase resulted in the formation of several smaller basins, each with its own characteristic depositional succession. The basins fall into three structural provinces: the eastern province (Lower Saxony Basin, E-W-striking; the northern province (Central Graben, N-S-striking; and the southern-central system (Roer Valley Graben - Broad Fourteens, with a strong NW-SE strike. The mid-Cimmerian event started to affect the Dutch basins during

  17. Experimental Analysis of Sandstone and Travertine

    Directory of Open Access Journals (Sweden)

    T. Doležel

    2004-01-01

    Full Text Available Sandstone and travertine are sedimentary rocks. The former is clastic, while the latter is sourced by chemical precipitation from hot springs. Their applications in civil engineering structures are mostly influenced by the ability to carry compression loading. A three-point bending experiment is usually used to determine material characteristics. However it does not correspond very well to applicatiosn in structures. For this reason we used a uniaxial compression test to obtain the modulus of elasticity and the stress-strain diagram. To obtain detailed information about the crystalline structure of sandstone and travertine a microscopic analysis wascarried out, using optical microscopy and an EDAX multichannel spectrometer for elementary microanalysis. 

  18. Refractory Metal Nuggets -- Formation of the First Condensates in the Solar Nebula

    CERN Document Server

    Liffman, Kurt; Maddison, Sarah; Brooks, Geoffrey

    2012-01-01

    As gas flowed from the solar accretion disk or solar nebula onto the proto-Sun, magnetic pressure gradients in the solar magnetosphere and the inner solar nebula provided an environment where some of this infalling flow was diverted to produce a low pressure, high temperature, gaseous, "infall" atmosphere around the inner solar nebula. The pressure in this inner disk atmosphere was mainly dependant on the accretion flow rate onto the star. High flow rates implied relatively high pressures, which decreased over time as the accretion rate decreased. In the first hundred thousand years after the formation of the solar nebula, accretional flow gas pressures were high enough to create submicron-sized Refractory Metal Nuggets (RMNs) - the precursors to Calcium Aluminum Inclusions (CAIs). Optimal temperatures and pressures for RMN formation may have occurred between 20,000 to 100,000 years after the formation of the solar nebula. It is possible that conditions were conducive to RMN/CAI formation over an eighty thous...

  19. Composition and clues to the origin of refractory metal nuggets extracted from chondritic meteorites

    Science.gov (United States)

    Schwander, D.; Berg, T.; Harries, D.; Schönhense, G.; Ott, U.

    2014-10-01

    Refractory metal nuggets (RMNs) contain elements, such as Os, Ir, Mo, and Ru, which are predicted to condense from a cooling gas of solar composition simultaneously with CAI-minerals. Berg et al. identified a large number of RMNs in acid-resistant residues of the Murchison meteorite and suggested that they are pristine condensates. In extending the work of these authors, we have improved the chemical extraction process to enrich the concentration of RMNs in the residue sample and prepared three additional RMN-rich residues from the chondritic meteorites Murchison, Allende, and Leoville. The results show that, while their origin is clearly solar, the compositions in detail of RMNs from all three meteorites do not match well with a simple condensation model based on equilibrium thermodynamics and ideal solid solution of all metals. Thus, we find that a primary formation by direct condensation, as suggested previously, is unlikely for most of the studied grains and that alternative scenarios should be considered in future work. The results also show that several, but not all, alloys from Allende and Leoville have undergone processes, such as metamorphic oxidation and sulfidization in the meteoritic environment, in which they lost, e.g., W and Mo. For Murchison and several Leoville and Allende RMNs, we propose a pristine nature.

  20. Formation of the seed black holes: a role of quark nuggets?

    CERN Document Server

    Lai, Xiaoyu

    2009-01-01

    Strange quark nuggets (SQNs) could be the relics of the cosmological QCD phase transition, and they could very likely be the candidates of cold quark matter if survived the cooling of the later Universe, although the formation and evolution of these SQNs depend on the physical state of the hot QGP phase and the state of cold quark matter. We reconsider the possibility of SQNs as cold dark matter, and find that the evolution of the first generation stars (Population III stars) could then be different from the standard case. The SQNs near the center of a halo could sink into the center of the star via dynamical friction, and lose their kinetic energy by collisions with gas molecules. These SQNs would then collapse into a black hole, and after sufficient accretion the mass of the black hole could be of $\\sim 10^3 M_\\odot$. The black holes formed in this way could be the seeds of the supermassive black holes at redshifts as high as $z\\sim 6$.

  1. Kinetic studies on the reduction of iron ore nuggets by devolatilization of lean-grade coal

    Science.gov (United States)

    Biswas, Chanchal; Gupta, Prithviraj; De, Arnab; Chaudhuri, Mahua Ghosh; Dey, Rajib

    2016-12-01

    An isothermal kinetic study of a novel technique for reducing agglomerated iron ore by volatiles released by pyrolysis of lean-grade non-coking coal was carried out at temperature from 1050 to 1200°C for 10-120 min. The reduced samples were characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy, and chemical analysis. A good degree of metallization and reduction was achieved. Gas diffusion through the solid was identified as the reaction-rate-controlling resistance; however, during the initial period, particularly at lower temperatures, resistance to interfacial chemical reaction was also significant, though not dominant. The apparent rate constant was observed to increase marginally with decreasing size of the particles constituting the nuggets. The apparent activation energy of reduction was estimated to be in the range from 49.640 to 51.220 kJ/mol and was not observed to be affected by the particle size. The sulfur and carbon contents in the reduced samples were also determined.

  2. Kinetic studies on the reduction of iron ore nuggets by devolatilization of lean-grade coal

    Institute of Scientific and Technical Information of China (English)

    Chanchal Biswas; PrithviraJGupta; Arnab De; Mahua Ghosh Chaudhuri; and Rajib Dey

    2016-01-01

    An isothermal kinetic study of a novel technique for reducing agglomerated iron ore by volatiles released by pyrolysis of lean-grade non-coking coal was carried out at temperature from 1050 to 1200°C for 10–120 min. The reduced samples were characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy, and chemical analysis. A good degree of metallization and reduction was achieved. Gas diffusion through the solid was identified as the reaction-rate-controlling resistance; however, during the initial period, particularly at lower temperatures, resistance to interfacial chemical reaction was also significant, though not dominant. The apparent rate constant was observed to increase marginally with decreasing size of the particles constituting the nuggets. The apparent activation energy of reduction was estimated to be in the range from 49.640 to 51.220 kJ/mol and was not observed to be affected by the particle size. The sulfur and carbon contents in the reduced samples were also determined.

  3. Quark nuggets search using 2350 Kg gravitational waves aluminum bar detectors

    CERN Document Server

    Astone, P; Coccia, E; D'Antonio, S; Fafone, V; Giordano, G; Marini, A; Minenkov, Y; Modena, I; Moleti, A; Pallottino, G V; Pizzella, G; Rocchi, A; Ronga, F; Visco, M

    2013-01-01

    The gravitational wave resonant detectors can be used as detectors of quark nuggets, like nuclearites (nuclear matter with a strange quark). This search has been carried out using data from two 2350 Kg, 2 K cooled, aluminum bar detectors: NAUTILUS, located in Frascati (Italy), and EXPLORER, that was located in CERN Geneva (CH). Both antennas are equipped with cosmic ray shower detectors: signals in the bar due to showers are continuously detected and used to characterize the antenna performances. The bar excitation mechanism is based on the so called thermo-acoustic effect, studied on dedicated experiments that use particle beams. This mechanism predicts that vibrations of bars are induced by the heat deposited in the bar from the particle. The geometrical acceptance of the bar detectors is 19.5 $\\rm m^2$ sr, that is smaller than that of other detectors used for similar searches. However, the detection mechanism is completely different and is more straightforward than in other detectors. We will show the resu...

  4. Two new confirmed massive relic galaxies: red nuggets in the present-day Universe

    Science.gov (United States)

    Ferré-Mateu, Anna; Trujillo, Ignacio; Martín-Navarro, Ignacio; Vazdekis, Alexandre; Mezcua, Mar; Balcells, Marc; Domínguez, Lilian

    2017-01-01

    We confirm two new local massive relic galaxies, i.e. untouched survivors of the early universe massive population: Mrk 1216 and PGC 032873. Both show early and peaked formation events within very short timescales (formation histories remain virtually unchanged out to several effective radii, even when considering the steeper IMF values inferred out to ˜3 effective radii. Their morphologies, kinematics and density profiles are like those found in the z>2 massive population, setting them apart of the typical z˜0 massive early-type galaxies. We find that there seems to exist a degree of relic that is related on how far into the path to become one of these typical z˜0 massive galaxies the compact relic has undergone. This path is partly dictated by the environment the galaxy lives in. For galaxies in rich environments, such as the previously reported relic galaxy NGC 1277, the most extreme properties (e.g. sizes, short formation timescales, larger super-massive black holes) are expected, while lower density environments will have galaxies with delayed and/or extended star formations, slightly larger sizes and not that extreme black hole masses. The confirmation of 3 relic galaxies up to a distance of 106 Mpc implies a lower limit in the number density of these red nuggets in the local universe of 6× 10-7 Mpc3, which is within the theoretical expectations.

  5. Panning for RRL Nuggets in the SDSS-DR9, Single Epoch Spectra

    CERN Document Server

    Wilhelm, Ronald; De Lee, Nathan

    2013-01-01

    The SDSS has been a gold mine for understanding properties of the Milky Way. Below, in the watershed, there remain small nuggets to be found flowing from the deepest recesses of the mine. The SDSS-DR9 included the release of the flux- and wavelength-calibrated, individual spectra which were subsequently combined to form the composite spectra found in previous SDSS data releases. These single-epoch spectra (SES) can be analyzed to find flux and spectral line variability, and to probe aspects of phase variations for objects such as RRL stars. For $\\sim 45%$ of the spectra in the RRL color range, SES were taken on separate nights, sometimes weeks apart. The remaining dataset have a time baseline of 0.75 to 1.5 hours and consist of 4-7 separate exposures. In my talk I will present details of our project to detect variability and to constrain the pulsation phase at the time of observation. I will discuss our auto-detection technique that uses division of all SES for a given star to search for variations in the flu...

  6. Vertebrate fossils and trace fossils in Upper Jurassic-Lower cretaceous red beds in the Atacama region, Chile

    Science.gov (United States)

    Bell, C. M.; Suárez, M.

    Pterosaur, dinosaur, and crocodile bones are recorded here for the first time in Upper Jurassic-Lower Cretaceous red beds in the Atacama region east of Copiapó, Chile. Trace fossils produced by vertebrate animals include the footprints of theropod dinosaurs and the depressions of sandstone laminae interpreted as burrows and foot impressions. The fossils occur in the 1500-meter-thick Quebrada Monardes Formation, which consists predominantly of the aeolian and alluvial deposits of a semi-arid terrestrial environment. Vertebrate fossils are very rare in Chile. Dinosaur bones and footprints have previously been recorded at only seven locations, and pterosaur remains at only one location. The newly discovered dinosaur bones are the oldest to be described in Chile.

  7. Diagenesis in porosity evolution of opening-mode fractures, Middle Triassic to Lower Jurassic La Boca Formation, NE Mexico

    Science.gov (United States)

    Laubach, Stephen E.; Ward, Meghan E.

    2006-06-01

    Opening-mode fractures (joints) in Middle Triassic to Lower Jurassic La Boca Formation sandstones, northeastern Mexico, have patterns of fracture porosity, mineral-fill structures, and size distributions not previously described from outcrop. Patterns match those found in cores from many basins. We used aperture measurements along lines of observation (scanlines), fracture-trace maps, petrography, high-resolution scanning-electron-microscope-(SEM)-based cathodoluminescence, and fluid inclusions to characterize fracture populations. Open fractures are lined by quartz that precipitated while fractures were opening, whereas sealed fractures additionally contain calcite deposited after fractures ceased opening. Large fractures and arrays of contemporaneous microfractures have consistent power-law aperture-size scaling over approximately three orders of magnitude. Our results imply that open fractures and fracture sizes depend on diagenetic state. The interplay of fracture mechanics and diagenetic history is a determinant on effective porosity within fractures and, thus, open fracture persistence, connectivity, and fluid flow.

  8. Pangaean climate during the Early Jurassic: GCM simulations and the sedimentary record of paleoclimate

    Energy Technology Data Exchange (ETDEWEB)

    Chandler, M.A. [Columbia Univ., Palisades, NY (United States); Rind, D.; Ruedy, R. [Goddard Institute for Space Studies, New York, NY (United States)

    1992-05-01

    Results from new simulations of the Early Jurassic climate show that increased ocean heat transport may have been the primary force generating warmer climates during the past 180 m.y. The simulations, conducted using the general circulation model (GCM) at the Goddard Institute for Space Studies, include realistic representations of paleocontinental distribution, topography, epeiric seas, and vegetation, in order to facilitate comparisons between model results and paleoclimate data. three major features of the simulated Early Jurassic climate include the following. (1) A global warming, compared to the present, of 5 {degrees}C to 10 {degrees}C, with temperature increases at high latitudes five times this global average. Average summer temperatures exceed 35 {degrees}C in low-latitude regions of western Pangaea where eolian sandstones testify to the presence of vast deserts. (2) Simulated precipitation and evaporation patterns agree closely with the moisture distribution interpreted from evaporites, and coal deposits. High rainfall rates are associated primarily with monsoons that originate over the warm Tethys Ocean. Unlike the {open_quotes}megamonsoons{close_quotes} proposed in previous studies, these systems are found to be associated with localized pressure cells whose positions are controlled by topography and coastal geography. (3) Decreases in planetary albedo, occurring because of reductions in sea ice, snow cover, and low clouds, and increases in atmospheric water vapor are the positive climate feedbacks that amplify the global warming. Similar to other Mesozoic climate simulations, our model finds that large seasonal temperature fluctuations occurred over mid- and high-latitude continental interiors, refuting paleoclimate evidence that suggests more equable conditions. 101 refs., 9 figs., 3 tabs.

  9. Tectonic evolution of the Malay Peninsula inferred from Jurassic to Cretaceous paleomagnetic results

    Science.gov (United States)

    Otofuji, Yo-ichiro; Moriyama, Yuji T.; Arita, Maiko P.; Miyazaki, Masanari; Tsumura, Kosuke; Yoshimura, Yutaka; Shuib, Mustaffa Kamal; Sone, Masatoshi; Miki, Masako; Uno, Koji; Wada, Yutaka; Zaman, Haider

    2017-02-01

    A primary remanent magnetization is identified in the Jurassic-Cretaceous red bed sandstones of the Tembeling Group in Peninsular Malaysia. This high-temperature magnetic component is unblocked at 680-690 °C, revealing a clockwise deflected direction of Ds = 56.8°, Is = 31.6° (where ks = 8.5, α95 = 11.3° and N = 22) in stratigraphic coordinates. The primary origin of this component is ascertained by a positive fold test and a geomagnetic polarity reversal in the Kuala Wau section. Secondary remanent magnetizations are identified in the rocks of the Tembeling and Bertangga basins, which indicate a counter-clockwise deflection in the geographic coordinates (Dg = 349.1°, Ig = 15.3° where kg = 11.8, α95 = 5.1°, N = 72). The comparison with the expected paleomagnetic directions from the 130 Ma and 40 Ma Eurasian poles indicates two-stages of tectonic movement in the southern Malay Peninsula: (1) a clockwise rotation of 61.1° ± 11.9° accompanied by a 13.3° ± 8.1° southward displacement after the Cretaceous; and (2) a subsequent counter-clockwise rotation of 18.5° ± 5.0° to the present day position. The first stage of rotation is ascribed to tectonic deformation caused by the indentation of India into Asia after 55 Ma, while the second stage is attributed to the collision of the Australian Plate with SE Asia after 30-20 Ma. The present paleomagnetic results from the Jurassic-Cretaceous Tembeling Group thus reveal impacts of both of these collisions on SE Asia in general and on Peninsular Malaysia in particular.

  10. Cold seep-related occurrence of the Early Jurassic rhynchonellid brachiopod Anarhynchia from the Canadian Cordillera

    Science.gov (United States)

    Pálfy, József; Price, Gregory D.; Vörös, Attila; Kovács, Zsófia; Johannson, Gary G.

    2017-04-01

    Cold seeps, where seepage of methane and/or other hydrocarbon-rich fluids and hydrogen-sulfide occurs in the sea floor, are sites which harbor highly specialized ecosystems associated with distinctive carbonate sediments. Although their Mesozoic record is scarce and patchy, it commonly includes rhynchonellid brachiopods, often of large size. Each new occurrence is valuable in filling gaps and providing additional insight into these peculiar ecosystems. Here we report a monospecific assemblage of Anarhynchia from a boulder-sized limestone clast of Early Pliensbachian (Early Jurassic) age in the Inklin Formation of the Whitehorse Trough in Stikine terrane, recovered from a locality at Copper Island in Atlin Lake, northern British Columbia, Canada. Specimens are of unusually large size, up to 9 cm in length, and their external and internal morphology allows assignment to Anarhynchia but warrants introduction of a new species. Although d13C and d18O values of the shells are close to equilibrium with ancient seawater, early precipitated carbonate cement phases of the enclosing limestone are characterised by highly depleted carbon isotopic composition, indicative of the influence of microbial oxidation of methane derived from a cold seep. Carbonate petrography of the isopachous, banded-fibrous cement supports its origin in a cold seep environment. Volcanogenic detrital grains in the micritic matrix of the limestone clast are indistinguishable from those in the sandstone layers in the siliciclastic sequence, suggesting that the seep carbonate is broadly coeval with the enclosing conglomerate. Previously, Anarhynchia has been known from the Lower Jurassic of California and Oregon, from both cold seep and hydrothermal vent deposits. Our new record extends the geographic range and species-level diversity of the genus, but supports its endemism to the East Pacific and membership in chemosynthesis-based ecosystems.

  11. Performance of Different Acids on Sandstone Formations

    Directory of Open Access Journals (Sweden)

    M. A. Zaman

    2013-12-01

    Full Text Available Stimulation of sandstone formations is a challenging task, which involves several chemicals and physical interactions of the acid with the formation. Some of these reactions may result in formation damage. Mud acid has been successfully used to stimulate sandstone reservoirs for a number of years. It is a mixture of hydrofluoric (HF and hydrochloric (HCl acids designed to dissolve clays and siliceous fines accumulated in the near-wellbore region. Matrix acidizing may also be used to increase formation permeability in undamaged wells. The change may be up to 50% to 100% with the mud acid. For any acidizing process, the selection of acid (Formulation and Concentration and the design (Pre-flush, Main Acid, After-flush is very important. Different researchers are using different combinations of acids with different concentrations to get the best results for acidization. Mainly the common practice is combination of Hydrochloric Acid – Hydrofluoric with Concentration (3% HF – 12% HCl. This paper presents the results of a laboratory investigation of Orthophosphoric acid instead of hydrochloric acid in one combination and the second combination is Fluoboric and formic acid and the third one is formic and hydrofluoric acid. The results are compared with the mud acid and the results calculated are porosity, permeability, and FESEM Analysis and Strength tests. All of these new combinations shows that these have the potential to be used as acidizing acids on sandstone formations.

  12. Synkinematic quartz cementation in partially open fractures in sandstones

    Science.gov (United States)

    Ukar, Estibalitz; Laubach, Stephen E.; Fall, Andras; Eichhubl, Peter

    2014-05-01

    Faults and networks of naturally open fractures can provide open conduits for fluid flow, and may play a significant role in hydrocarbon recovery, hydrogeology, and CO2 sequestration. However, sandstone fracture systems are commonly infilled, at least to some degree, by quartz cement, which can stiffen and occlude fractures. Such cement deposits can systematically reduce the overall permeability enhancement due to open fractures (by reducing open fracture length) and result in permeability anisotropies. Thus, it is important to identify the factors that control the precipitation of quartz in fractures in order to identify potential fluid conduits under the present-day stress field. In many sandstones, quartz nucleates syntaxially on quartz grain or cement substrate of the fracture wall, and extends between fracture walls only locally, forming pillars or bridges. Scanning electron microscope cathodoluminescence (SEM-CL) images reveal that the core of these bridges are made up of bands of broken and resealed cement containing wall-parallel fluid inclusion planes. The fluid inclusion-rich core is usually surrounded by a layer of inclusion-poor clear quartz that comprises the lateral cement. Such crack-seal textures indicate that this phase was precipitating while the fractures were actively opening (synkinematic growth). Rapid quartz accumulation is generally believed to require temperatures of 80°C or more. Fluid inclusion thermometry and Raman spectroscopy of two-phase aqueous fluid-inclusions trapped in crack-seal bands may be used to track the P-T-X evolution of pore fluids during fracture opening and crack-seal cementation of quartz. Quartz cement bridges across opening mode fractures in the Cretaceous Travis Peak Formation of the tectonically quiescent East Texas Basin indicate individual fractures opened over a 48 m.y. time span at rates of 16-23 µm/m.y. Similarly, the Upper Cretaceous Mesaverde Group in the Piceance Basin, Colorado contains fractures that

  13. New gliding mammaliaforms from the Jurassic

    Science.gov (United States)

    Meng, Qing-Jin; Grossnickle, David M.; Liu, Di; Zhang, Yu-Guang; Neander, April I.; Ji, Qiang; Luo, Zhe-Xi

    2017-08-01

    Stem mammaliaforms are Mesozoic forerunners to mammals, and they offer critical evidence for the anatomical evolution and ecological diversification during the earliest mammalian history. Two new eleutherodonts from the Late Jurassic period have skin membranes and skeletal features that are adapted for gliding. Characteristics of their digits provide evidence of roosting behaviour, as in dermopterans and bats, and their feet have a calcaneal calcar to support the uropagatium as in bats. The new volant taxa are phylogenetically nested with arboreal eleutherodonts. Together, they show an evolutionary experimentation similar to the iterative evolutions of gliders within arboreal groups of marsupial and placental mammals. However, gliding eleutherodonts possess rigid interclavicle-clavicle structures, convergent to the avian furculum, and they retain shoulder girdle plesiomorphies of mammaliaforms and monotremes. Forelimb mobility required by gliding occurs at the acromion-clavicle and glenohumeral joints, is different from and convergent to the shoulder mobility at the pivotal clavicle-sternal joint in marsupial and placental gliders.

  14. Hydrofacies In Sandstones. Evidence For Feedback Between Sandstone Lithofacies and Permeability Development

    Science.gov (United States)

    Bloomfield, J. P.; Newell, A.; Moreau, M.

    In order to enhance our ability to develop effective numerical models of flow and con- taminant transport in the Permo-Triassic sandstone aquifer of the UK, relationships between lithofacies, rock mass characteristics (such as porosity and pore-throat size distribution), and permeability have been investigated through a series of case studies. Flow in the Permo-Triassic sandstones is primarily through the matrix. Permeability distribution is principally a function of the pore-throat size distribution and there is a relatively weak correlation with primary sedimentary lithofacies. It is observed that matrix permeability data broadly fall into two, discontinuous, sub-populations above and below about 1 mD. It is proposed that modification of primary sedimentary litho- facies by circulation of groundwater is the main control on the development of these two permeability sub-populations or hydrofacies. Identification of these two hydrofa- cies has significant implications for numerical modelling of the sandstones.

  15. The Tendaguru Formation (Late Jurassic to Early Cretaceous, southern Tanzania: definition, palaeoenvironments, and sequence stratigraphy

    Directory of Open Access Journals (Sweden)

    R. Bussert

    2009-08-01

    Full Text Available The well-known Late Jurassic to Early Cretaceous Tendaguru Beds of southern Tanzania have yielded fossil plant remains, invertebrates and vertebrates, notably dinosaurs, of exceptional scientific importance. Based on data of the German-Tanzanian Tendaguru Expedition 2000 and previous studies, and in accordance with the international stratigraphic guide, we raise the Tendaguru Beds to formational rank and recognise six members (from bottom to top: Lower Dinosaur Member, Nerinella Member, Middle Dinosaur Member, Indotrigonia africana Member, Upper Dinosaur Member, and Rutitrigonia bornhardti-schwarzi Member. We characterise and discuss each member in detail in terms of derivation of name, definition of a type section, distribution, thickness, lithofacies, boundaries, palaeontology, and age. The age of the whole formation apparently ranges at least from the middle Oxfordian to the Valanginian through Hauterivian or possibly Aptian. The Tendaguru Formation constitutes a cyclic sedimentary succession, consisting of three marginal marine, sandstone-dominated depositional units and three predominantly coastal to tidal plain, fine-grained depositional units with dinosaur remains. It represents four third-order sequences, which are composed of transgressive and highstand systems tracts. Sequence boundaries are represented by transgressive ravinement surfaces and maximum flooding surfaces. In a more simple way, the depositional sequences can be subdivided into transgressive and regressive sequences/systems tracts. Whereas the transgressive systems tracts are mainly represented by shallow marine shoreface, tidal channel and sand bar sandstones, the regressive systems tracts predominantly consist of shallow tidal channel, tidal flat, and marginal lagoonal to supratidal deposits. doi:10.1002/mmng.200900004

  16. The influence of climate on early and burial diagenesis of Triassic and Jurassic sandstones from the Norwegian – Danish Basin

    DEFF Research Database (Denmark)

    Weibel, Rikke; Olivarius, Mette; Kjøller, Claus

    2017-01-01

    to the Gassum Formation, which was characterized by quartz and more stable heavy minerals. The arid to semi-arid climate led to early oxidising conditions under which abundant iron-oxide/hydroxide coatings formed, while the evaporative processes occasionally resulted in caliche and gypsum precipitation. Under...... and geochemical study complemented by porosity and permeability measurements of cores widely distributed in the basin (1700 – 5900 m burial depth). The Skagerrak Formation had an immature composition with more abundant feldspar, rock fragments and a larger variability in the heavy mineral assemblage when compared...... the humid climate, kaolinite precipitated due to leaching of feldspar and mica, and the abundant organic matter caused reducing conditions, which led to other Fe-rich phases, i.e. pyrite, Fe-chlorite and siderite. The inherited early diagenetic pore fluids and mineral assemblage also affect the mineral...

  17. The influence of climate on early and burial diagenesis of Triassic and Jurassic sandstones from the Norwegian – Danish Basin

    DEFF Research Database (Denmark)

    Weibel, Rikke; Olivarius, Mette; Kjøller, Claus

    2017-01-01

    the humid climate, kaolinite precipitated due to leaching of feldspar and mica, and the abundant organic matter caused reducing conditions, which led to other Fe-rich phases, i.e. pyrite, Fe-chlorite and siderite. The inherited early diagenetic pore fluids and mineral assemblage also affect the mineral...

  18. Earliest Marine beds in the Jurassic sedimentary record near the Huajuapan-Petlalcingo region, southern Mexico and their paleogeographic implications

    Science.gov (United States)

    Contla, D.

    2008-12-01

    A paleogeographic model of Jurassic-Cretaceous is presented, the study area is the region near Huajuapan de Leon in the Mixteca Terrane, Mexico where a sedimentary successions constituted by interlayered terrestrial and marine beds, provides evidence of transgression and regression episodes. The sediments in the study zone were deposited over a Paleozoic metamorphic basement, the Acatlan Complex. The stratigraphic features in the Middle Jurassic of the terrestrial beds indicate a depositional elements varying from alluvial fans to floodplains and channel deposits, represented by conglomerates, sandy conglomerates and sandstones. After, in the same epoch (Bajocian and Bathonian age) a transgression coming from the Pacific Ocean covered the region. A transitional zone between continental and marine sediments is situated between Tezoatlan and Petlalcingo, the actual cross section consists in the earliest marine beds: limestones interlayered with terrestrial beds. Fossil contents in this beds indicate an age between the Oxfordian and the Tithonian. During this period of transgression the paleogeography was dominated by a small bay with shallow waters connected in the south with the Pacific Ocean, represented principally by limestone and dolomite units. At the end of the transgression, volcanic episodes occurred and the land emerged again. The sedimentary beds were later affected by tectonic activity that produced a normal fault near Zapotitlan, putting the metamorphic basement in contact with the sedimentary sequence.

  19. Dinosaur ichnofauna of the Upper Jurassic/Lower Cretaceous of the Paraná Basin (Brazil and Uruguay)

    Science.gov (United States)

    Francischini, H.; Dentzien–Dias, P. C.; Fernandes, M. A.; Schultz, C. L.

    2015-11-01

    Upper Jurassic and Lower Cretaceous sedimentary layers are represented in the Brazilian Paraná Basin by the fluvio-aeolian Guará Formation and the Botucatu Formation palaeoerg, respectively, overlapped by the volcanic Serra Geral Formation. In Uruguay, the corresponding sedimentary units are named Batoví and Rivera Members (both from the Tacuarembó Formation), and the lava flows constitute the Arapey Formation (also in Paraná Basin). Despite the lack of body fossils in the mentioned Brazilian formations, Guará/Batoví dinosaur fauna is composed of theropod, ornithopod and wide-gauge sauropod tracks and isolated footprints, as well as theropod teeth. In turn, the Botucatu/Rivera dinosaur fauna is represented by theropod and ornithopod ichnofossils smaller than those from the underlying units. The analysis of these dinosaur ichnological records and comparisons with other global Mesozoic ichnofauna indicates that there is a size reduction in dinosaur fauna in the more arid Botucatu/Rivera environment, which is dominated by aeolian dunes. The absence of sauropod trackways in the Botucatu Sandstone fits with the increasingly arid conditions because it is difficult for heavy animals to walk on sandy dunes, as well as to obtain the required amount of food resources. This comparison between the Upper Jurassic and Lower Cretaceous dinosaur fauna in south Brazil and Uruguay demonstrates the influence of aridization on the size of animals occupying each habitat.

  20. Precipitate stability and recrystallisation in the weld nuggets of friction stir welded Al-Mg-Si and Al-Mg-Sc alloys

    Energy Technology Data Exchange (ETDEWEB)

    Sauvage, X. [University of Rouen, Groupe de Physique des Materiaux, CNRS (UMR 6634), Avenue de l' Universite-BP 12, 76801 Saint-Etienne du Rouvray (France)], E-mail: xavier.sauvage@univ-rouen.fr; Dede, A. [University of Rouen, Groupe de Physique des Materiaux, CNRS (UMR 6634), Avenue de l' Universite-BP 12, 76801 Saint-Etienne du Rouvray (France); Munoz, A. Cabello; Huneau, B. [Institut de Recherche en Genie Civil et Mecanique, Ecole Centrale de Nantes, Universite de Nantes, CNRS (UMR 6183), 1 rue de la Noe-BP 92101, 44321 Nantes (France)

    2008-09-15

    Two different precipitate hardening aluminium alloys processed by friction stir welding were investigated. The microstructure and the hardness of the as delivered materials were compared to that of the weld nugget. Transmission electron microscopy observations combined with three-dimensional atom probe analyses clearly show that {beta}'' precipitates dissolved in the nugget of the Al-Mg-Si giving rise to some supersaturated solid solution. It is shown that the dramatic softening of the weld could be partly recovered by post-welding ageing treatments. In the Al-Mg-Sc alloy, Al{sub 3}Sc precipitate size and density are unchanged in the nugget comparing to the base metal. These precipitates strongly reduce the boundary mobility of recrystallised grains, leading to a grain size in the nugget much smaller than in the Al-Mg-Si alloy. Both coherent and incoherent precipitates were detected. This feature may indicate that a combination of continuous and discontinuous recrystallisation occurred in the weld nugget.

  1. LA-ICPMS Zircon U-Pb Dating in the Jurassic Daohugou Beds and Correlative Strata in Ningcheng of Inner Mongolia

    Institute of Scientific and Technical Information of China (English)

    LIU Yanxue; LIU Yongqing; ZHANG Hong

    2006-01-01

    LA-ICPMS Zircon U-Pb dating is applied to volcanic rocks overlying and underlying the Salamander-bearing bed in the Daohugou beds of Ningcheng in Inner Mongola and Reshuichang of Lingyuan and Mazhangzi of Jianping in western Liaoning. The results indicate that the youngest age of the rocks in Daohugou of Ningcheng is 158 Ma, and the oldest one is 164 Ma. Synthesized researches indicate that the salamander-bearing beds in Daohugou of Ningcheng, Reshuichang of Lingyuan and Mazhangzi of Jianping were developed in the same period. The Daohugou beds were formed in the geological age of 164-158 Ma of the middle-late Jurassic. Whilst, the Daohugou beds and its correlative strata should correspond to the Tiaojishan Formation (or Lanqi Formation) of the middle Jurassic in northern Hebei Province and western Liaoning Province, based on the disconformity between the Daohugou beds and its overlaying beds of the Tuchengzi Formation of Late Jurassic and the Jehol Beds of early Cretaceous, and the disconformity between the Daohugou Beds and its underlying Jiulongshan Formation, which is composed of conglomerate, sandstone, shale with coal and thin coal beds.

  2. Trans-border (South-Eastern Serbia/South-Western Bulgaria correlations of the Jurassic sediments: The Getic and Supra-Getic units

    Directory of Open Access Journals (Sweden)

    Tchoumatchenco Platon

    2008-01-01

    Full Text Available The Getic and Supra-Getic are palaeogeographic units in SE Serbia and SW Bulgaria. Based on the presence (in Eastern or absence (in Western of Lower Jurassic marine deposits, the Getic is divided into Eastern and Western. In the Eastern Getic, the Lower Jurassic sedimentation in SE Serbia is represented by the Vidlič Clastites covered by the Lukanja Coal Beds, Lukanja Quartz Sandstones, Lukanja Brachiopods Beds, Lukanja Marlstones, Lukanja Belemnitic-Gryphaean Beds and Lukanja Cephalopod Limestones; in SW Bulgaria, the sedimentation commenced with the Tuden Formation, followed by the Kostina Formation and the Ozirovo Formation with a few members. The Middle Jurassic in SE Serbia commenced with the Senokos Siltstones and Shales and the Gulenovci Beds, while in SW Bulgaria with black shales (the Etropole Formation, followed by marls and clayey limestones of the Bov Formation. The Middle Jurassic sediments are represented in the Western Getic of SE Serbia by the Kurilovo Clastites and the Kurilovo Limestones (synonym to Gumpina Limestones of KRAÜTNER & KRSTIĆ 2003; in the Supra-Getic of SE Serbia they are formed by the Jerma Clastites and Jerma Limestones (synonym of the Gumpina Limestones. In SW Bulgaria the Middle Jurassic sediments are represented by the sandstones of the Gradets Formation and by the bioclastic limestones of the Polaten Formation. During the Callovian (Middle? started the formation of a carbonate platform with micritic limestones. In SE Serbia, it is Basara Limestones, Vidlič Limestones, Beljanica and Ždrelo Limestones, and in SW Bulgarian, the Belediehan Formation of Callovian-Kimmeridgian p.p. age. Characteristic for the Supra- Getic is the formation of a few grabens with specific sedimentation: the Svetlya Graben (the Zhablyano and Ozirovo Formations and the Lobosh Formation; the Treklyano Graben (the Dobridol and Sredorek Formations, and out of it - the Methohya and Sredorek Formation. During the Callovian

  3. Analysis of Radiation Exposure for Naval Personnel at Operation SANDSTONE.

    Science.gov (United States)

    1983-08-15

    Operation SANDSTONE Dose Reconstruction Methodology I I 2-1 Enewetak Atoll Anchorage Areas 14 2-2 Destroyer Patrol Sector Chart for Operation SANDSTONE 18...2-3 Average Free-Field Radiation Intensity for Southern and Northern Anchorage Areas - Enewetak Atoll 24 2-4 Average Free-Field Radiation Intensity...Operation SANDSTONE was the second nuclear test series held in the Marshall 0 Islands. It consisted of three nuclear weapon tests at Enewetak * Atoll in

  4. Characterization of heterolithic deposits using electrofacies analysis in the tide-dominated Lower Jurassic Cook Formation (Gullfaks Field, offshore Norway)

    Energy Technology Data Exchange (ETDEWEB)

    Gupta, R. [Imperial College of Science, Technology and Medicine, London (United Kingdom). T.H. Huxley School of Environment, Earth Sciences and Engineering; Johnson, H.D.

    2001-08-01

    A range of heterolithic facies, comprising thinly interbedded (millimetre-decimetre scale) sandstones and mudstones, characterizes the heterogeneous Lower Jurassic Cook Formation, including the productive Cook-3 reservoir in the Gullfaks Field. These heterolithic facies were deposited in a tide-dominated estuarine to deltaic setting and show up as massive 'shaly-sands' on conventional wireline logs. This makes the recognition and discrimination of different heterolithic facies types virtually impossible, which severely limits detailed reservoir geological and petrophysical predictions. This problem has been addressed by undertaking a high resolution electrofacies analysis using core facies as a 'training set' and applying this, through multivariate statistical techniques, to the interpretation of the conventional logs. An electrofacies database was created comprising five genetically linked rock types (ranging from lenticular-wavy bedding, through flaser bedding and into clean/massive sandstones). This electrofacies scheme was validated with reference to c. 125 m of cored section from five wells using gamma-ray, density and neutron logs. Multivariate statistical techniques have enabled probabilistic discrimination of the different types of heterolithic facies down to intervals of only 0.25 to 0.5 m thick, which is considerably greater than could be achieved using conventional well-log evaluation techniques alone. (author)

  5. Influence of storage temperature on growth of Penicillium polonicum and Penicillium glabrum and potential for deterioration of frozen chicken nuggets.

    Science.gov (United States)

    Saccomori, Fernanda; Wigmann, Évelin Francine; Bernardi, Angélica Olivier; Alcano-González, María de Jesús; Copetti, Marina Venturini

    2015-05-04

    The practice of freezing food is one of the main processes used by the industry to prolong the shelf life of foods. Its use has expanded in recent years due to the increased consumption of convenience products, many of which are sold in frozen form. The temperature at which these foods are maintained during marketing in supermarkets or stored in the consumer's home is critical to ensure microbiological stability of products. Temperature abuse can allow microbial growth, especially growth of filamentous psychrophilic fungi. Besides economic losses in the industrial sector due to the return of products and loss of confidence by consumers, the development of fungi in foods is a public health problem due to the possibility of mycotoxin production. The aim of this study was to assess the growth at temperatures of 5, 0, -5 and -18°C for two species of fungi involved in the deterioration of frozen chicken nuggets, Penicillium polonicum (33/12 NGT) and Penicillium glabrum (29/12 NGT), inoculated both in culture medium and in the food. The results demonstrated that P. polonicum was able to form microcolonies on potato dextrose agar plates at 0°C and form visible colonies on the surface of the frozen chicken nuggets kept at -5°C for 120 days, regardless of brand. For P. glabrum the limiting growth temperature was 5°C in the culture medium and 0°C on frozen chicken nuggets, regardless of the brand analyzed. Thus, it is essential to adhere to the storage temperatures recommended to ensure the stability and safety of this food product.

  6. Tunasniyoj, a dinosaur tracksite from the Jurassic-Cretaceous boundary of Bolivia.

    Science.gov (United States)

    Apesteguía, Sebastián; Gallina, Pablo A

    2011-03-01

    Here we report a superbly preserved and profusely represented five-ichnotaxa dinosaur track assemblage near Icla village, 100 km southeast of Sucre, Bolivia. As preserved in reddish Jurassic-Cretaceous boundary aeolian sandstones, this rich and uncommon assemblage is, additionally, the oldest dinosaur tracksite for Bolivia. Four trackmakers were identified in the area: three quadrupedal and one bipedal, all of them with tracks of around 35 cm in lenght. One of the quadrupedals is represented by no less than five adult individuals (ichnotaxon A), and four purported juveniles (ichnotaxon B) walking in association. The other two quadrupedals (ichnotaxa C and D) involve four trackways, and the last, the bipedal trackmaker (ichnotaxon E), is represented by one trackway. The five ichnotaxa represented in the "Palmar de Tunasniyoj" could be tentatively assigned to the following trackmakers: Ichnotaxa A and B are assigned to basal stegosaurians; ichnotaxon C to a basal tyreophoran, perhaps related to the ankylosaur lineage; ichnotaxon D to the Ankylosauria, and ichnotaxon E to Theropoda. The Tunasniyoj assemblage, the oldest dinosaur tracksite for Bolivia, includes the oldest known evidence assigned to ankylosaurs and stegosaurs for South America.

  7. Sedimentological evolution, diagenesis and hydrocarbon potentiality of late Jurassic carbonates, Eastern Region, Yemen Arab Republic

    Energy Technology Data Exchange (ETDEWEB)

    El-anbaawy, M.I.H.; Al-thour, K.A. (Dept. of Geology, Faculty of Science, Cairo Univ., Giza (EG))

    1989-01-01

    On the basis of the lateral and vertical distribution of the lithofacies identified within the Late Jurassic Amran sequence (Thoma Member) in Jabal Al-Balaq area, Marib, Y.A.R., three megafacies were recognized. Proceeding from the shore landwards they are: Ooid bank, including barriers such as reefs and carbonate sand shoals adjacent to the margin of a shallow platform having intertidal to subtidal agitated water, the bank being composed of skeletal packstone, oolitic grainstone and oncolitic packstone; Shelf lagoon, behind the shoal, characterized by less turbulent pelletoidal wackestone, sandy mudstone and algal stromatolite (boundstone); Alluvial coastal plain, including tidal sand flat of the marine shoreline-intertidal area, where cross-bedded sandstone and alluvial fan toe conglomerate were deposited. The apparent small-scale facies variations which are the result of the allocyclic tectonically controlled sea level fluctuations, reflect a complex interfingering of the depositional environments and the resulting rock types. The paragenetic sequence of the post-depositional processes within the siliciclastics inferred is: iron oxide cementation, authigenic growth of mica clays, generation of pressure solution and compaction, and generation of quartz overgrowths. It is indicated that the compaction process followed the neomorphism and cementation within the carbonates.

  8. Lithofacies and sequence stratigraphic analysis of the Upper Jurassic siliciclastics in the eastern Kopet-Dagh Basin, NE Iran

    Science.gov (United States)

    Zand-Moghadam, Hamed; Moussavi-Harami, Reza; Mahboubi, Asadollah; Aghaei, Ali

    2016-05-01

    The Upper Jurassic (Oxfordian-Kimmeridgian) Mozduran Formation is the most important gas reservoirs of the northeast Iran. Siliciclastic facies of this formation in eastern most parts of the basin have not been studied yet. Therefore, four stratigraphic sections of Mozduran Formation have been selected in the Kole-Malekabad, Kale-Karab, Deraz-Ab and Karizak to interpret depositional history and analyze depositional sequences. Based on texture and sedimentary structures, 14 slilciclastic lithofacies were identified and classified into four categories, including conglomerate (Gms, Gp, Gt), sandstone (Sh, Sp, St, Sr, Sl, Sm, Se), mud rock (Fl) and intermediate sandstone-mud rock (Sr (Fl), Sr/Fl, Fl (Sr)). Identified lithofacies formed four architectural elements CH, SB, LA and FF. Lithofacies characteristics and architectural elements with mostly bimodal pattern of paleocurrents show that the majority of Mozduran lithofacies deposited in the coastal environment (tidal influence). Sequence stratigraphic analysis shows that the Kole-Malekabad section consists of two depositional sequences while other sections are characterized by three depositional sequences. The lower and upper sequence boundaries of the Mozduran Formation in all stratigraphic sections are SB1 that are distinguished by paleosol and sometime conglomerate horizons. Most of depositional sequences in studied sections are composed only of TST and HST. The TST deposits consist mostly of quartzarenite and litharenite petrofacies that have been deposited in the tidal zone. HST packages are mostly including mud rocks with interdeds of sandstone lithofacies that are deposited in supratidal setting. The LST facies is recognized only in the DS3 (equivalent to the second depositional sequences of the Kole-Malekabad), which consist of conglomerate facies. Instead, the Kole-Malekabad section is often composed of supratidal gypsiferrous shales, indicating sea level fall in the study area.

  9. Schmeissneria: An angiosperm from the Early Jurassic

    Institute of Scientific and Technical Information of China (English)

    Xin WANG

    2010-01-01

    The origin of angiosperms has been a focus of intensive research for a long time. The so-called preCretaceous angiosperms, including Schmeissneria, are usually clouded with doubt. To expel the cloud around the enigmatic Schmeissneria, the syntype and new materials of Schmeissneria collected previously in Germany and recently in China are studied. These materials include female inflorescences and infructescences. The latter are old materials but were under-studied previously. Light microscopy and scanning electron microscope observations indicate that the fruits in these infructescences have in situ seeds enclosed, and that the ovaries are closed before pollination. Thus the plants meet two strict criteria for angiosperms: angiospermy plus angio-ovuly. Placing Schmeissneria in angiosperms will extend the record of angiosperms up to the Early Jurassic, more compatible with many molecular dating conclusions on the age of angiosperms, and demanding a reassessment of the current doctrines on the origin of angiosperms. Although the phylogenetic relationship of Schmeissneria to other angiosperms apparently is still an open question, this study adds to research concerning the origin of angiosperms.

  10. Refractory Metal Nuggets - Formation of the first condensates in the Solar Nebula

    Science.gov (United States)

    Liffman, Kurt; Pignatale, Francesco C.; Maddison, Sarah; Brooks, Geoffrey

    2012-09-01

    As gas flowed from the solar accretion disk or Solar Nebula onto the proto-Sun, magnetic pressure gradients in the solar magnetosphere and the inner Solar Nebula provided an environment where some of this infalling flow was diverted to produce a low pressure, high temperature, gaseous, “infall” atmosphere around the inner Solar Nebula. The pressure in this inner disk atmosphere was mainly dependant on the accretion flow rate onto the star. High flow rates implied relatively high pressures, which decreased over time as the accretion rate decreased. In the first hundred thousand years after the formation of the Solar Nebula, accretional flow gas pressures were high enough to create submicron-sized Refractory Metal Nuggets (RMNs) - the precursors to Calcium Aluminum Inclusions (CAIs). Optimal temperatures and pressures for RMN formation may have occurred between 20,000 and 100,000 years after the formation of the Solar Nebula. It is possible that conditions were conducive to RMN/CAI formation over an 80,000 year timescale. The “infall” atmosphere and the condensation of refractory particles within this atmosphere may be observable around the inner disks of other protostellar systems. The interaction of forces from magnetic fields with the radiation pressure from the proto-Sun and the inner solar accretion disk potentially produced an optical-magnetic trap above and below the inner Solar Nebula, which provided a relatively stable environment in which the RMNs/proto-CAIs could form and grow. These RMN formation sites only existed during accretion events from the proto-solar disk onto the proto-Sun. As such, the formation and growth time of a particular RMN was dependent on the timescale of its nascent accretion event. Observational evidence suggests that RMNs were the nucleation particles for CAIs. As a consequence, the observed bimodal distribution of 26Al in CAIs, where some CAIs have 26Al while others do not, is probably due to the injection 26Al during the

  11. Mechanism of Solid Bitumen in Silurian Sandstones of Tarim Basin

    Institute of Scientific and Technical Information of China (English)

    Zhang Jinglian; Zhu Bingquan

    1997-01-01

    @@ There are a large amount of solid bitumen within Silurian sandstones in Tabei, Tazhong, Kalpin uprifts of the Tarim Basin. Petroleum geochemists are interested in the super giant fossil oil pool. Unfortunately,some key questions have not been solved, such as: what generated the bitumen? When did the bitumen generate and when did the bitumen accumulated in the sandstones?

  12. Brittle and compaction creep in porous sandstone

    Science.gov (United States)

    Heap, Michael; Brantut, Nicolas; Baud, Patrick; Meredith, Philip

    2015-04-01

    Strain localisation in the Earth's crust occurs at all scales, from the fracture of grains at the microscale to crustal-scale faulting. Over the last fifty years, laboratory rock deformation studies have exposed the variety of deformation mechanisms and failure modes of rock. Broadly speaking, rock failure can be described as either dilatant (brittle) or compactive. While dilatant failure in porous sandstones is manifest as shear fracturing, their failure in the compactant regime can be characterised by either distributed cataclastic flow or the formation of localised compaction bands. To better understand the time-dependency of strain localisation (shear fracturing and compaction band growth), we performed triaxial deformation experiments on water-saturated Bleurswiller sandstone (porosity = 24%) under a constant stress (creep) in the dilatant and compactive regimes, with particular focus on time-dependent compaction band formation in the compactive regime. Our experiments show that inelastic strain accumulates at a constant stress in the brittle and compactive regimes leading to the development of shear fractures and compaction bands, respectively. While creep in the dilatant regime is characterised by an increase in porosity and, ultimately, an acceleration in axial strain to shear failure (as observed in previous studies), compaction creep is characterised by a reduction in porosity and a gradual deceleration in axial strain. The overall deceleration in axial strain, AE activity, and porosity change during creep compaction is punctuated by excursions interpreted as the formation of compaction bands. The growth rate of compaction bands formed during creep is lower as the applied differential stress, and hence background creep strain rate, is decreased, although the inelastic strain required for a compaction band remains constant over strain rates spanning several orders of magnitude. We find that, despite the large differences in strain rate and growth rate

  13. Subsurface sandstone mapping by combination of GPR and ERT method

    Institute of Scientific and Technical Information of China (English)

    YOU Zhixin

    2016-01-01

    It is important to know the shape and distribution of sandstone bodies in the subsurface when forma-tion and migration of a dune model are determined.The information plays a significant role in identification of the continental oil and gas accumulation.In this study,the combination of ground penetrating radar (GPR) and electrical resistivity tomography method (ERT)is used in mapping the distribution of sandstone bodies in Yanchang Formation.Six GPR profiles and seven ERT profiles are used to analysis.GPR data show clear re-flections from the top interface of sandstones.ERT data show a continuous high resistivity anomaly correspon-ding to the sandstone body.Combined the reconstructed 3D images by GPR and ERT,the spatial distribution of sandstone bodies is described.

  14. Petrographic and geochemical characterization of the Triassic and Jurassic magmatic and volcanic rocks of southeastern Ecuador

    Science.gov (United States)

    Villares, Fabián; Eguez, Arturo; Yanez, Ernesto

    2014-05-01

    Formely, the subandean zone in the southeastern Ecuador involved large volcanic and magmatic rocks included in the Misahualli Formation and Zamora batholith, both as expression of the Jurassic cal-alcaline volcanic arc. The aim of the project carried out by the INIGEMM (Instituto Nacional de Investigación Geológico Minero Metalúrgico) was discriminate the volcanic products including a continuous set going from basalts to ryolithes and volcanoclastic rocks. Geochemical characterization was done using representative 16 whole - rock chemical analysis. The oldest rocks of the investigated area called Pachicutza Unit, include greenish to black, massive basalts and basaltic andesites, locally showing pillows structures. The texture is aphanitic to microporphyritic with slight crystal growth of plagioclase and pyroxenes. The Unit include also local pyroclastic breccias and tuffs showing variable skarnification related to the intrusion of the jurassic Zamora Batholith. Two samples of basalts show tholeiitic affinity, corresponding to an N- MORB, probably representing an early stage in opening of a regional Triassic rift reported since Colombia to Peru in the Andes. These geochemical characteristics are similar to the amphibolites of Monte Olivo Unit in the Real Cordillera. The Jurassic large volcanic assembly of the Misahualli Formation was also differenciated. Basal volcanics include green, subporphyritic andesites and volcanic breccias possibly generated at an early stage of the volcanic arc, caused by a change of extensive to compressive regime. Continental volcano sedimentary and sedimentary rock were discriminate as Nueva Esperanza and Suarez Units, respectively. The volcanosedimentary sequence include massive to laminate tuffs and tuffites of intermediate composition. The sediments of the Suarez Unit include dominant conglomerats and sandstones of fluvial domain. The regional volcanic sequence is completed by the Las Peñas Unit that includes aphanitic to

  15. The Jurassic of Denmark and Greenland: Upper Jurassic – Lower Cretaceous of the Danish Central Graben: structural framework and nomenclature

    Directory of Open Access Journals (Sweden)

    Japsen, Peter

    2003-10-01

    Full Text Available The Danish Central Graben is part of the mainly Late Jurassic complex of grabens in the central and southern North Sea which form the Central Graben. The tectonic elements of the Danish Central Graben in the Late Jurassic are outlined and compared to those in the Early Cretaceous based on reduced versions of published maps (1:200 000, compiled on the basis of all 1994 public domain seismic and well data. The Tail End Graben, a half-graben which stretches for about 90 km along the East North Sea High, is the dominant Late Jurassic structural feature. The Rosa Basin (new name is a narrow, north-south-trending basin extending from the south-western part of the Tail End Graben. The Tail End Graben ceased to exist as a coherent structural element during the Early Cretaceous and developed into three separate depocentres: the Iris and Gulnare Basins to the north and the Roar Basin to the south (new names. The Early Cretaceous saw a shift from subsidence focused along the East North Sea High during the Late Jurassic to a more even distribution of minor basins within the Danish Central Graben. The depth to the top of the Upper Jurassic - lowermost Cretaceous Farsund Formation reaches a maximum of 4800 m in the northern part of the study area, while the depth to the base of the Upper Jurassic reaches 7500 m in the Tail End Graben, where the Upper Jurassic attains a maximum thickness of 3600 m. The Lower Cretaceous Cromer Knoll Group attains a maximum thickness of 1100 m in the Outer Rough Basin.

  16. Factors controlling localization of uranium deposits in the Dakota Sandstone, Gallup and Ambrosia Lake mining districts, McKinley County, New Mexico

    Science.gov (United States)

    Pierson, Charles Thomas; Green, Morris W.

    1977-01-01

    Geologic studies were made at all of the uranium mines and prospects in the Dakota Sandstone of Early(?) and Late Cretaceous age in the Gallup mining district, McKinley County, New Mexico. Dakota mines in the adjacent Ambrosia Lake mining district were visited briefly for comparative purposes. Mines in the eastern part of the Gallup district, and in the Ambrosia Lake district, are on the Chaco slope of the southern San Juan Basin in strata which dip gently northward toward the central part of the basin. Mines in the western part of the Gallup district are along the Gallup hogback (Nutria monocline) in strata which dip steeply westward into the Gallup sag. Geologic factors which controlled formation of the uranium deposits in the Dakota Sandstone are: (1) a source of uranium, believed to be uranium deposits of the underlying Morrison Formation of Late Jurassic age; (2) the accessibility to the Dakota of uranium-bearing solutions from the Morrison; (3) the presence in the Dakota of permeable sandstone beds overlain by impermeable carbonaceous shale beds; and (4) the occurrence within the permeable Dakota sandstone beds of carbonaceous reducing material as bedding-plane laminae, or as pockets of carbonaceous trash. Most of the Dakota uranium deposits are found in the lower part of the formation in marginal-marine distributary-channel sandstones which were deposited in the backshore environment. However, the Hogback no. 4 (Hyde) Mine (Gallup district) occurs in sandy paludal shale of the backshore environment, and another deposit, the Silver Spur (Ambrosia Lake district), is found in what is interpreted to be a massive beach or barrier-bar sandstone of the foreshore environment in the upper part of the Dakota. The sedimentary depositional environment most favorable for the accumulation of uranium is that of backshore areas lateral to main distributary channels, where levee, splay, and some distributary-channel sandstones intertongue with gray carbonaceous shales and

  17. 塔里木盆地典型砂岩油气储层自生伊利石K-Ar同位素测年研究与成藏年代探讨%K-Ar Dating of Authigenic Illites and Its Applications to the Study of Hydrocarbon Charging Histories of Typical Sandstone Reservoirs in Tarim Basin, China

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    The Tarim Basin in China comprises eight sets of sandstone reservoirs, five of which are investigated in detail in this study. The main purpose of this study is to investigate the hydrocarbon charging histories of reservoirs by applying K-Ar dating of authigenic illites. The ages of authigenic illites from the Lower Silurian bituminous sandstones in the Central Uplift area range from 383.5 to 235.2 Ma, suggesting that the Silurian oil accumulations were formed from the late Caledonian till the late Hercynian. The ages of authigenic illites from the Upper Devonian Donghe Sandstone reservoirs range from 263.8 to 231.3 Ma, indicating that hydrocarbon accumulations within the Donghe sandstone were formed mainly in the late Hercynian. The authigenic illites ages from the Lower Jurassic Yangxia Group sandstones in the Yinan-2 gas reservoir (Yinan-2, Kuqa Depression) range from 28.1 to 23.9 Ma, suggesting that the initial hydrocarbon charging occurred in the Miocene. The ages of the authigenic illites from the Lower Cretaceous sandstones in the Akemomu gas field (Ake-1, Kashi Sag, Southwest Depression) range from 22.6 to 18.8 Ma, indicating a probable early oil accumulation or early migration of hydrocarbon within this area. The illites from the Paleogene sandstones in the Dina-2 gas reservoir (Dina-201, Kuqa Depression) have a detrital origin; they cannot be used to study the hydrocarbon charging histories. The ages of authigenic illites in the underlying Cretaceous sandstones in the same well (Dina-201)range from 25.5 to 15.5 Ma, indicating that hydrocarbon charging in this reservoir probably occurred within the Miocene.This study highlights the potential of applying K-Ar dating of authigenic illites to investigate the timing of hydrocarbon charging histories of the Tarim Basin reservoir sandstones.

  18. Effect of temperature on sandstone permeability

    DEFF Research Database (Denmark)

    Rosenbrand, Esther; Kjøller, Claus

    assumptions would be required in order to estimate sandstone permeability based on the Kozeny equation. An effective specific surface area per pore volume for permeability was estimated by using image analysis and pore size distributions as from nuclear magnetic resonance (NMR) transverse relaxation data...... be determined based on the Klinkenberg (1941) procedure, which accounts for effects on permeability of gas slip on the fluid-solid interface by means of several permeability measurements with different pore pressures. A comparison between the equivalent pore sizes as estimated using the Kozeny equation...... at 80°C than at 20°C; at 80°C the main effect might be due to an alteration of pore fluid rheology, whereas at 20°C particles might be filtered in pore constrictions. DLVO theory (Derjaguin and Landau (1941); Verwey and Overbeek (1948)) was used to compare effects of temperature and salinity on surface...

  19. Dilatant hardening of fluid-saturated sandstone

    Science.gov (United States)

    Makhnenko, Roman Y.; Labuz, Joseph F.

    2015-02-01

    The presence of pore fluid in rock affects both the elastic and inelastic deformation processes, yet laboratory testing is typically performed on dry material even though in situ the rock is often saturated. Techniques were developed for testing fluid-saturated porous rock under the limiting conditions of drained, undrained, and unjacketed response. Confined compression experiments, both conventional triaxial and plane strain, were performed on water-saturated Berea sandstone to investigate poroelastic and inelastic behavior. Measured drained response was used to calibrate an elasto-plastic constitutive model that predicts undrained inelastic deformation. The experimental data show good agreement with the model: dilatant hardening in undrained triaxial and plane strain compression tests under constant mean stress was predicted and observed.

  20. Attenuation of Landfill Leachate In Unsaturated Sandstone

    Science.gov (United States)

    Butler, A. P.; Brook, C.; Godley, A.; Lewin, K.; Young, C. P.

    Landfill leachate emanating from old "dilute and disperse" sites represents a potential (and in many cases actual) threat to the integrity of groundwater. Indeed, this concern has been included in EU legislation (80/86/EEC), where key contaminants (e.g. ammonia, various toxic organic compounds and heavy metals) are explicitly highlighted in terms of their impact on groundwater. In the UK, whilst there are a substantial number of unlined landfills sited on major aquifers, many of these are in locations where there is a substantial unsaturated zone. Thus, there exists the opportunity for the modification and attenuation of contaminants prior to it encountering the water table. An understanding of likely changes in leachate content and concentrations at such sites will enable a more comprehensive assessment of the potential risks and liabilities posed by such sites to be evaluated. The Burntstump landfill, situated 8 km north of Nottingham (UK), is sited on an outcrop of Sherwood sandstone. The fine friable sand has been quarried since the 1960s and the excavated volume used to store municipal waste. Filling at the site commenced in the mid 1970s and originally was unlined. In 1978 the first of what was to become a series of boreholes was installed within an area of roughly 5 m radius over one of the original waste cells. Cores of the waste and underlying sandstone were extracted and analysed for a range of physical and chemical parameters. The most recent set of analyses were obtained in 2000. The series of investigations therefore provide an important record of leachate migration and modification through the unsaturated zone for over twenty years. The progression of the leachate front is clearly delineated by the chloride concentration profile with an average velocity of around 1.6 m.yr-1. Combining this value with an average (and reasonably uniform) measured moisture content of about 7% gives a mean inter-granular specific discharge of 110 mm.yr-1. An interesting

  1. Influence of tool pin profile on microstructure and corrosion behaviour of AA2219 Al–Cu alloy friction stir weld nuggets

    Directory of Open Access Journals (Sweden)

    Ch. Venkata Rao

    2015-09-01

    Full Text Available To overcome the problems of fusion welding of aluminium alloys, the friction stir welding (FSW is recognized as an alternative joining method to improve the mechanical and corrosion properties. Tool profile is one of the important variables which affect the performance of the FS weld. In the present work, the effect of tool profile on the weld nugget microstructure and pitting corrosion of AA2219 aluminium–copper alloy was studied. FSW of AA2219 alloy was carried out using five profiles, namely conical, square, triangle, pentagon and hexagon. The temperature measurements were made in the region adjacent to the rotating pin. It was observed that the peak temperature is more in hexagonal tool pin compared to the welds produced with other tool pin profiles. It is observed that the extensive deformation experienced at the nugget zone and the evolved microstructure strongly influences the hardness and corrosion properties of the joint during FSW. It was found that the microstructure changes like grain size, misorientation and precipitate dissolution during FSW influence the hardness and corrosion behaviour. Pitting corrosion resistance of friction stir welds of AA2219 was found to be better for hexagon profile tool compared to other profiles, which was attributed to material flow and strengthening precipitate morphology in nugget zone. Higher amount of heat generation in FS welds made with hexagonal profile tool may be the reason for greater dissolution of strengthening precipitates in nugget zone.

  2. Heterocyclic aromatic amine content in chicken burgers and chicken nuggets sold in fast food restaurants and effects of green tea extract and microwave thawing on their formation

    Science.gov (United States)

    The aims of the current study were to investigate the presence of carcinogenic and mutagenic heterocyclic aromatic amines (HAAs) in chicken burgers (CBs) and chicken nuggets (CNs) purchased from fast food restaurants and the effects of green tea extract addition (GTE) to the covering material as wel...

  3. Harvestmen (Arachnida: Opiliones) from the Middle Jurassic of China

    Science.gov (United States)

    Huang, Diying; Selden, Paul A.; Dunlop, Jason A.

    2009-08-01

    Harvestmen (Arachnida: Opiliones) are familiar animals in most terrestrial habitats but are rare as fossils, with only a handful of species known from each of the Palaeozoic, Mesozoic, and Cenozoic eras. Fossil harvestmen from Middle Jurassic (ca. 165 Ma) strata of Daohugou, Inner Mongolia, China, are described as Mesobunus martensi gen. et sp. nov. and Daohugopilio sheari gen. et sp. nov.; the two genera differ primarily in the relative length of their legs and details of the pedipalps. Jurassic arachnids are extremely rare and these fossils represent the first Jurassic, and only the fourth Mesozoic, record of Opiliones. These remarkably well-preserved and modern-looking fossils are assigned to the Eupnoi, whereby M. martensi demonstrably belongs in Sclerosomatidae. It thus represents the oldest record of a modern harvestman family and implies a high degree of evolutionary stasis among one of the most widespread and abundant groups of long-legged, round-bodied harvestmen.

  4. The Jurassic of Denmark and Greenland: The use of spectral natural gamma-ray analysis in reservoir evaluation of siliciclastic sediments: a case study from the Middle Jurassic of the Harald Field, Danish Central Graben

    Directory of Open Access Journals (Sweden)

    Fabricius, Ida L.

    2003-10-01

    Full Text Available A cored sandstone interval from the Middle Jurassic Harald Field of the Danish North Sea was chosen for an investigation of the mineralogical sources for the gamma-ray activity, and with the purpose of determining how the Spectral Natural Gamma (SNG log could be used as an indicator of reservoir quality. Core intervals of quartz arenites and quartz wackes were selected. Although no linear relationship was found between clay content and potassium (K, thorium (Th, or uranium (U, the K content characterises three discrete lithofacies. Lithofacies I has a grain-supported texture, with a predominance of quartz grains; only minor fine-grained matrix is present. Sandstones of lithofacies I have a low K content and most of the K is hosted in feldspar. Porosity varies between 23% and 28% and permeability is in the range 200-2000 mD. Lithofacies II sandstones have a grain-supported texture, with a predominance of quartz grains; fine-grained matrix fills the intergranular volume. Sandstones of lithofacies II have an intermediate K content, with K-feldspar, mica, and illite as the main sources. Porosity varies between 11% and 17% and permeability is in the range 0.4-25 mD. Lithofacies III has a matrix-supported texture with quartz grains floating in a clay-rich matrix. Samples from lithofacies III have the highest K signal. Illite and illitised kaolinite are roughly equal in importance as sources of K. Porosity is up to 11% and permeability up to 0.5 mD. The Th and U content of all lithofacies is governed primarily by the presence of heavy minerals; no apparent general relationship between U and Total Organic Carbon (TOC was found. Comparisons between the core measurements of K, Th, and U, and the SNG log disclosed a discrepancy between the calibrations of laboratory and borehole measurements. For U the discrepancy contains an erratic element, whereas the difference for K and Th can be eliminated by correction factors. Thus, the conclusions based on

  5. Effect of different binders on the physico-chemical, textural, histological, and sensory qualities of retort pouched buffalo meat nuggets.

    Science.gov (United States)

    Devadason, I Prince; Anjaneyulu, A S R; Babji, Y

    2010-01-01

    The functional properties of 4 binders, namely corn starch, wheat semolina, wheat flour, and tapioca starches, were evaluated to improve the quality of buffalo meat nuggets processed in retort pouches at F(0) 12.13. Incorporation of corn starch in buffalo meat nuggets produced more stable emulsion than other binders used. Product yield, drip loss, and pH did not vary significantly between the products with different binders. Shear force value was significantly higher for product with corn starch (0.42 +/- 0.0 Kg/cm(3)) followed by refined wheat flour (0.36 +/- 0.010 Kg/cm(3)), tapioca starch (0.32 +/- 0.010 Kg/cm(3)), and wheat semolina (0.32 +/- 0.010 Kg/cm(3)). Type of binder used had no significant effect on frying loss, moisture, and protein content of the product. However, fat content was higher in products with corn starch when compared to products with other binders. Texture profile indicated that products made with corn starch (22.17 +/- 2.55 N) and refined wheat flour (21.50 +/- 0.75 N) contributed firmer texture to the product. Corn starch contributed greater chewiness (83.8 +/- 12.51) to the products resulting in higher sensory scores for texture and overall acceptability. Products containing corn starch showed higher sensory scores for all attributes in comparison to products with other binders. Panelists preferred products containing different binders in the order of corn starch (7.23 +/- 0.09) > refined wheat flour (6.48 +/- 0.13) > tapioca starch (6.45 +/- 0.14) > wheat semolina (6.35 +/- 0.13) based on sensory scores. Histological studies indicated that products with corn starch showed dense protein matrix, uniform fat globules, and less number of vacuoles when compared to products made with other binders. The results indicated that corn flour is the better cereal binder for developing buffalo meat nuggets when compared to all other binders based on physico-chemical and sensory attributes.

  6. The second Jurassic dinosaur rush and the dawn of dinomania.

    Science.gov (United States)

    Brinkman, Paul D

    2010-09-01

    During the second Jurassic dinosaur rush museum paleontologists raced to display the world's first mounted sauropod dinosaur. The American Museum of Natural History triumphed in 1905 when its Brontosaurus debuted before an admiring crowd of wealthy New Yorkers. The Carnegie Museum of Natural History in Pittsburgh, the Field Columbian Museum in Chicago and other institutions were quick to follow with their own sauropod displays. Thereafter, dinomania spread far and wide, and big, showpiece dinosaurs became a museum staple. This brief but intensely competitive period of acquisitiveness fostered important Jurassic dinosaur revisions and crucial innovations in paleontological field and lab techniques.

  7. Jurassic domes in the North Sea - northern North Atlantic region

    Energy Technology Data Exchange (ETDEWEB)

    Surlyk, F. [Univ. of Copenhagen, Geological Inst., Copenhagen (Denmark)

    1996-12-31

    The stratigraphic and tectonic evolution of the Jurassic of East Greenland, the Norwegian Shelf and the North Sea is remarkably similar. A major Middle Jurassic unconformity occurs in all three areas. In the North Sea it is commonly termed the `Mid-Cimmerian Unconformity` and is characterized by progressive truncation of the underlying section towards a centre at the triple junction between the Central Graben, Viking Graben and Moray Firth. Strata above the unconformity show a progressive Late Aalenian-Early Kimmeridgian onlap in the same direction. These relations have been interpreted as caused by Early Jurassic uplift and of a major thermal dome in the central North Sea, followed by Medial and Late Jurassic rifting, erosion, deflation and transgression of the dome. The East Greenland unconformity shows progressive truncation of underlying strata from south to north, and Bajocian to Callovian onlap in the same direction. The same pattern seems to be developed on the conjugate Norwegian margin. This suggests the possibility that the three unconformities have similar causes for their development. It is proposed that major rift domes formed in the Central North Sea and in the Greenland-Norway seaway in Early Jurassic times. The domes were eroded and gradually deflated during Medial Jurassic times and were finally submerged by the Late Oxfordian-Kimmeridgian. They were associated with volcanism and rifting which was delayed with respect to dome initiation. Roughly contemperaneous domes were present west of Britain, north of the Porcupine Seabight, and in Scania, southern Sweden, as reflected by development of asymmetrical unconformities showing progressive truncation of underlying strata, onlap of overlying Jurassic strata, and associated intrusive and extrusive volcanism. The domes are related to impingement of the heads of transient mantle plumes at the base of the lithosphere. The associated unconformities are thus of non-eustatic nature. Domal uplift and

  8. Trachyteuthis covacevichi n. sp., a Late Jurassic Palaeopacific coleoid cephalopod

    Directory of Open Access Journals (Sweden)

    D. Fuchs

    2008-02-01

    Full Text Available A new early Oxfordian coleoid cephalopod, Trachyteuthis covacevichi n. sp., is described from northern Chile. It represents the first Late Jurassic Palaeopacific vampyropod and thus considerably extends the palaeogeographic distribution of trachyteuthids. In general, Tr. covacevichi n. sp. possesses a gladius typical for the genus, but wider than in other species. Similarities between Tr. covacevichi n. sp., Tr. palmeri from the Oxfordian of Cuba and Tr. sp. from the Kimmeridgian of Europe confirm a Caribbean Seaway between the Tethys and the Palaeopacific during Late Jurassic times. Morphologically, the wide gladius of Tr. covacevichi n. sp. supports a close phylogenetic relationship between Teudopsis and Trachyteuthis. doi:10.1002/mmng.200700012

  9. Jurassic Tectonics of North China: A Synthetic View

    Institute of Scientific and Technical Information of China (English)

    ZHANG Yueqiao; DONG Shuwen; ZHAO Yue; ZHANG Tian

    2008-01-01

    This paper gives a synthetic view on the Jurassic tectonics of North China, with an attempt to propose a framework for the stepwise tectonic evolution history. Jurassic sedimentation, deformation and magmatism in North China have been divided into three stages. The earliest Jurassic is marked by a period of magmatism quiescence (in 205-190 Ma) and regional uplift, which are considered to be the continuation of the "Indosinian movement" characterized by continent-continent collision between the North and South China blocks. The Early to Middle Jurassic (in 190-170 Ma) was predominated by weak lithospheric extension expressed by mantle-derived plutonism and volcanism along the Yanshan belt and alongside the Tan-Lu fault zone, normal faulting and graben formation along the Yinshan-Yanshan tectonic belt, depression and resuming of coal-bearing sedimentation in vast regions of the North China block (NCB). The Middle to Late Jurassic stage started at 165,.5 Ma and ended up before 136 Ma; it was dominated by intensive intraplate deformation resulting from multi-directional compressions. Two major deformation events have been identified. One is marked by stratigraphic unconformity beneath the thick Upper Jurassic molasic series in the foreland zones of the western Ordos thrust-fold belt and along the Yinshan-Yanshan belt; it was predated 160 Ma. The other one is indicated by stratigraphic unconformity at the base of the Lower Cretaceous and predated 135 Ma. During this last stage, two latitudinal tectonic belts, the Yinshan-Yanshan belt in the north and the Qinling-Dabie belt in the south, and the western margin of the Ordos basin were all activated by thrusting; the NCB itself was deformed by the NE to NNE-trending structural system involving thrusting, associated folding and sinistral strike-slip faulting, which were spatially partitioned. Foliated S-type granitic plutons aged 160-150 Ma were massively emplaced in the Jiao-Liao massif east of the Tan-Lu fault zone and

  10. Apatite Fission-Track Analysis of the Middle Jurassic Todos Santos Formation from Chiapas, Mexico.

    Science.gov (United States)

    Abdullin, Fanis; Solé, Jesús; Shchepetilnikova, Valentina; Solari, Luigi; Ortega-Obregón, Carlos

    2014-05-01

    The Sierra de Chiapas (SCH), located in the south of Mexico, is a complex geological province that can be divided on four different lithological or tectonic areas: (1) the Chiapas Massif Complex (CMC); (2) the Central Depression; (3) the Strike-slip Fault Province, and (4) the Chiapas Fold-and-thrust Belt. The CMC mostly consists of Permian granitoids and meta-granitoids, and represents the basement of the SCH. During the Jurassic period red beds and salt were deposited on this territory, related to the main pulse of rifting and opening of the Gulf of Mexico. Most of the Cretaceous stratigraphy contains limestones and dolomites deposited on a marine platform setting during the postrift stage of the Gulf of Mexico rift. During the Cenozoic Era took place the major clastic sedimentation along the SCH. According the published low-temperature geochronology data (Witt et al., 2012), SCH has three main phases of thermo-tectonic history: (1) slow exhumation between 35 and 25 Ma, that affected mainly the basement (CMC) and is probably related to the migration of the Chortís block; (2) fast exhumation during the Middle-Late Miocene caused by strike-slip deformation that affects almost all Chiapas territory; (3) period of rapid cooling from 6 to 5 Ma, that affects the Chiapas Fold-and-thrust Belt, coincident with the landward migration of the Caribbean-North America plate boundaries. The two last events were the most significant on the formation of the present-day topography of the SCH. However, the stratigraphy of the SCH shows traces of the existence of earlier tectonic events. This study presents preliminary results of apatite fission-track (AFT) dating of sandstones from the Todos Santos Formation (Middle Jurassic). The analyses are performed with in situ uranium determination using LA-ICP-MS (e.g., Hasebe et al., 2004). The AFT data indicate that this Formation has suffered high-grade diagenesis (probably over 150 ºC) and the obtained cooling ages, about 70-60 Ma

  11. A two scale analysis of tight sandstones

    Science.gov (United States)

    Adler, P. M.; Davy, C. A.; Song, Y.; Troadec, D.; Hauss, G.; Skoczylas, F.

    2015-12-01

    Tight sandstones have a low porosity and a very small permeability K. Available models for K do not compare well with measurements. These sandstones are made of SiO_2 grains, with a typical size of several hundreds of micron. These grains are separated by a network of micro-cracks, with sizes ranging between microns down to tens of nm. Therefore, the structure can be schematized by Voronoi polyhedra separated by plane and permeable polygonal micro-cracks. Our goal is to estimate K based on a two scale analysis and to compare the results to measurements. For a particular sample [2], local measurements on several scales include FIB/SEM [3], CMT and 2D SEM. FIB/SEM is selected because the peak pore size given by Mercury Intrusion Porosimetry is of 350nm. FIB/SEM imaging (with 50 nm voxel size) identifies an individual crack of 180nm average opening, whereas CMT provides a connected porosity (individual crack) for 60 nm voxel size, of 4 micron average opening. Numerical modelling is performed by combining the micro-crack network scale (given by 2D SEM) and the 3D micro-crack scale (given by either FIB/SEM or CMT). Estimates of the micro-crack density are derived from 2D SEM trace maps by counting the intersections with scanlines, the surface density of traces, and the number of fracture intersections. K is deduced by using a semi empirical formula valid for identical, isotropic and uniformly distributed fractures [1]. This value is proportional to the micro-crack transmissivity sigma. Sigma is determined by solving the Stokes equation in the micro-cracks measured by FIB/SEM or CMT. K is obtained by combining the two previous results. Good correlation with measured values on centimetric plugs is found when using sigma from CMT data. The results are discussed and further research is proposed. [1] Adler et al, Fractured porous media, Oxford Univ. Press, 2012. [2] Duan et al, Int. J. Rock Mech. Mining Sci., 65, p75, 2014. [3] Song et al, Marine and Petroleum Eng., 65, p63

  12. Electrical-thermal interaction simulation for resistance spot welding nugget process of mild steel and stainless steel

    Institute of Scientific and Technical Information of China (English)

    王春生; 韩凤武; 陆培德; 赵熹华; 陈勇; 邱冬生

    2002-01-01

    A three-dimensional finite difference electrical-thermal model for resistance spot welding nugget process of mild steel and stainless steel is introduced. A simulation method of the interaction of electrical and thermal factors is presented. Meanwhile, calculation method of contact resistance and treatment method of heater structure is provided. The influence of the temperature dependent material properties and various cooling boundary conditions on welding process was also taken into account in the model. A method for improving the mild steel and stainless steel joint was analyzed in numerical simulation process. Experimental verification shows that the model prediction agrees well with the practice. The model provides a useful theoretic tool for the analysis of the process of resistance spot welding of mild steel and stainless steel.

  13. Friction Stir Welding of Stainless Steel to Al Alloy: Effect of Thermal Condition on Weld Nugget Microstructure

    Science.gov (United States)

    Ghosh, M.; Gupta, R. K.; Husain, M. M.

    2014-02-01

    Joining of dissimilar materials is always a global challenge. Sometimes it is unavoidable to execute multifarious activities by a single component. In the present investigation, 6061 aluminum alloy and 304 stainless steel were joined by friction stir welding (FSW) at different tool rotational rates. Welded joints were characterized in optical and scanning electron microscopes. Reaction products in the stirring zone (SZ) were confirmed through X-ray diffraction. Joint strength was evaluated by tensile testing. It was found that the increment in average heat input and temperature at the weld nugget (WN) facilitated iron enrichment near the interface. Enhancement in the concentration of iron shifted the nature of intermetallics from the Fe2Al5 to Fe-rich end of the Fe-Al binary phase diagram. The peak microhardness and ultimate tensile strength were found to be maxima at the intermediate tool rotational rate, where Fe3Al and FeAl2 appeared along with Fe2Al5.

  14. Tar sandstones in the Parana Basin: a study of the occurrences in the Anhembi Structural High; Arenitos asfalticos na Bacia do Parana: estudo das ocorrencias no Alto Estrutural de Anhembi

    Energy Technology Data Exchange (ETDEWEB)

    Araujo, Carlos Cesar de [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil). Area de Negocio Internacional], E-mail: ccaraujo@petrobras.com.br; Yamamoto, Jorge Kazuo; Rostirolla, Sidnei Pires

    2005-11-15

    There are tar accumulations in Early Triassic sandstones along the eastern margin of the Parana Basin. The aim of this research work is to explain the tar sandstone occurrences in the Anhembi High. The Anhembi High, where permian mudstones outcrop in a Triassic sandstone area, is a Jurassic-Cretaceous structure related to the reactivation of pre-existing basement faults. Tar was derived from Permian source rocks that matured along the basic sills of the continental flood basalt cover of Serra Geral Formation. This paper examines the habitat of tar accumulation and integrates fieldwork with morpho structural data, digital elevation model, gravity and airborne magnetic data and remote sensing imagery. The interpretation of the structural framework is based primarily on the morpho structural analysis, the distribution of gravity and magnetic anomalies and on a structural field survey. The Anhembi High consists of three blocks with a N50W-trending major axis. Tar sandstone outcrops occur around the Anhembi structure, on its low-lying block and are restricted to the lower Piramboia Formation. The morpho structural interpretation suggests the occurrence of tar sandstones at intermediate positions, between the structural highs and lows. The most likely explanation for these tar accumulations relates oil maturation and migration to the intrusion of Early Cretaceous Serra Geral sills into the Late Permian black shales of the Irati Formation, and subsequent migration along faults and dyke walls into eolian sandstone reservoirs of the Triassic Piramboia Formation. Not only did the basic dykes locally facilitate migration, but there were also places where they constituted barriers to lateral migration. Furthermore, the interdune and fluvial facies of the Piramboia Formation formed local seals and barriers to vertical migration.

  15. Refuge Management Plan: Sandstone Unit Rice Lake National Wildlife Refuge

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Part I of this management plan for the Sandstone Unit of Rice Lake NWR summarizes background information on the location, history, environment, resources,...

  16. Size effect of sandstone after high temperature under uniaxial compression

    Institute of Scientific and Technical Information of China (English)

    SU Hai-jian; JING Hong-wen; MAO Xian-biao; ZHAO Hong-hui; YIN Qian; WANG Chen

    2015-01-01

    Uniaxial compression tests on sandstone samples with five different sizes after high temperature processes were performed in order to investigate the size effect and its evolution. The test results show that the density, longitudinal wave velocity, peak strength, average modulus and secant modulus of sandstone decrease with the increase of temperature, however, peak strain increases gradually. With the increase of ratio of height to diameter, peak strength of sandstone decreases, which has an obvious size effect. A new theoretical model of size effect of sandstone material considering the influence of temperature is put forward, and with the increase of temperature, the size effect is more apparent. The threshold decreases gradually with the increase of temperature, and the deviations of the experimental values and the theoretical values are between 0.44% and 6.06%, which shows quite a credibility of the theoretical model.

  17. Study on the cutting plane friction law of sandstone

    Institute of Scientific and Technical Information of China (English)

    ZHAI Ying-da (翟英达); KANG Li-xun(康立勋)

    2003-01-01

    The friction characteristics of rock damage plane have important impact on the stability of block structure formed after the stratum is broken. The mechanics properties of rock damage plane are described by parameters such as roughness coefficient, wall compress strength and basic friction angle. These three coefficients for fine grain sandstone and medium-granular sandstone and grit sandstone are test. The friction stress is researched at the condition of different normal compressive stress acting on the tension damage plane. The friction law of tension damage plane of sandstone abided by is summed up. This law will provide scientific basis for block structure stability judging in basic roof stratum and roof pressure intensity calculating.

  18. Microstructures of Early Jurassic (Toarcian) shales of Northern Europe

    NARCIS (Netherlands)

    Houben, M.E.; Barnhoorn, A.; Wasch, L.; Trabucho-Alexandre, João; Peach, C.J.; Drury, M.R.

    2016-01-01

    The Toarcian (Early Jurassic) Posidonia Shale Formation is a possible unconventional gas source in Northern Europe and occurs within the Cleveland Basin (United Kingdom), the Anglo-Paris Basin (France), the Lower Saxony Basin and the Southwest Germany Basin (Germany), and the Roer Valley Graben, the

  19. Evidence for a Mid-Jurassic Adaptive Radiation in Mammals.

    Science.gov (United States)

    Close, Roger A; Friedman, Matt; Lloyd, Graeme T; Benson, Roger B J

    2015-08-17

    A series of spectacular discoveries have transformed our understanding of Mesozoic mammals in recent years. These finds reveal hitherto-unsuspected ecomorphological diversity that suggests that mammals experienced a major adaptive radiation during the Middle to Late Jurassic. Patterns of mammalian macroevolution must be reinterpreted in light of these new discoveries, but only taxonomic diversity and limited aspects of morphological disparity have been quantified. We assess rates of morphological evolution and temporal patterns of disparity using large datasets of discrete characters. Rates of morphological evolution were significantly elevated prior to the Late Jurassic, with a pronounced peak occurring during the Early to Middle Jurassic. This intense burst of phenotypic innovation coincided with a stepwise increase in apparent long-term standing diversity and the attainment of maximum disparity, supporting a "short-fuse" model of early mammalian diversification. Rates then declined sharply, and remained significantly low until the end of the Mesozoic, even among therians. This supports the "long-fuse" model of diversification in Mesozoic therians. Our findings demonstrate that sustained morphological innovation in Triassic stem-group mammals culminated in a global adaptive radiation of crown-group members during the Early to Middle Jurassic.

  20. Klukiopsis jurassica--A new Jurassic schizaeaceous fern from China

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    A new Jurassic schizaeaceous fern Klukiopsis jurassica gen. et sp. nov. from Yima, Henan Province, China is described. The new fern is characterized by the abaxial sori arranged in two rows, apical and complete annulus and more than 800 smooth trilete spores in each sorus.

  1. Jurassic Park as a Teaching Tool in the Chemistry Classroom.

    Science.gov (United States)

    Jollis, W. Gary, Jr.

    1996-01-01

    Describes how the science fiction novel "Jurassic Park" has been used to provide the focus for summate discussions among gifted high school students participating in a state-sponsored, science-intensive summer program. Discusses adaptations of this approach for use in chemistry classes from the high school to intermediate college level. (JRH)

  2. In situ Gymnosperm pollen from the Middle Jurassic of Yorkshire

    NARCIS (Netherlands)

    Konijnenburg-van Cittert, van Johanna H.A.

    1971-01-01

    In this paper the morphology of pollen grains yielded by male Gymnosperm fructifications from the Jurassic flora of Yorkshire is studied and discussed. Several new male fructifications were found and described: Hastystrobus gen. nov. was erected for male cones yielding the Eucommiidites type of poll

  3. Micropore Structure Representation of Sandstone in Petroleum Reservoirs Using an Atomic Force Microscope

    Institute of Scientific and Technical Information of China (English)

    BAI Yong-Qiang; ZHU Xing; WU Jun-Zheng; BAI Wen-Guang

    2011-01-01

    @@ The pore structure of sandstone in an oil reservoir is investigated using atomic force microscopy(AFM).At nanoscale resolution,AFM images of sandstone show us the fine structure.The real height data of images display the three-dimensional space structure of sandstone effectively.The three-dimensional analysis results show that the AFM images of sandstone have unique characteristics that,like fingerprints,can identify different structural properties of sandstones.The results demonstrate that AFM is an effective method used to represent original sandstone in petroleum reservoirs,and may help geologists to appreciate the sandstone in oil reservoirs fully.

  4. Diagenesis Along Fractures in an Eolian Sandstone, Gale Crater, Mars

    Science.gov (United States)

    Ming, D. W.; Yen, A. S.; Rampe, E. B.; Grotzinger, J. P.; Blake, D. F.; Bristow, T. F.; Chipera, S. J.; Downs, R.; Morris, R. V.; Morrison, S. M.; Vaniman, D. T.; Gellert, R.; Sutter, B.; Treiman, A. H.

    2016-01-01

    The Mars Science Laboratory rover Curiosity has been exploring sedimentary deposits in Gale crater since August 2012. The rover has traversed up section through approx.100 m of sedimentary rocks deposited in fluvial, deltaic, lacustrine, and eolian environments (Bradbury group and overlying Mount Sharp group). The Stimson formation lies unconformable over a lacustrine mudstone at the base of the Mount Sharp group and has been interpreted to be a cross-bedded sandstone of lithified eolian dunes. Mineralogy of the unaltered Stimson sandstone consists of plagioclase feldspar, pyroxenes, and magnetite with minor abundances of hematite, and Ca-sulfates (anhydrite, bassanite). Unaltered sandstone has a composition similar to the average Mars crustal composition. Alteration "halos" occur adjacent to fractures in the Stimson. Fluids passing through these fractures have altered the chemistry and mineralogy of the sandstone. Silicon and S enrichments and depletions in Al, Fe, Mg, Na, K, Ni and Mn suggest aqueous alteration in an open hydrologic system. Mineralogy of the altered Stimson is dominated by Ca-sulfates, Si-rich X-ray amorphous materials along with plagioclase feldspar, magnetite, and pyroxenes, but less abundant in the altered compared to the unaltered Stimson sandstone and lower pyroxene/plagioclase feldspar. The mineralogy and geochemistry of the altered sandstone suggest a complicated history with several (many?) episodes of aqueous alteration under a variety of environmental conditions (e.g., acidic, alkaline).

  5. JURASSIC PALEOGEOGRAPHY OF THE PIENINY AND OUTER CARPATHIAN BASINS

    Directory of Open Access Journals (Sweden)

    JAN GOLONKA

    2004-03-01

    Full Text Available The Jurassic history of the Pieniny/Outer Carpathian basins reflects the evolution of the Circum-Tethyan area, especially its Alpine Tethys part. The Alpine Tethys that is Ligurian, Penninic Oceans and Pieniny/Magura Basin constitute the extension of the Central Atlantic system. The synrift stage lasted in the Pieniny/Magura Basin from late Early Jurassic to Tithonian (the Magura Unit constitutes the southernmost part of the Outer Flysch Carpathians. The Pieniny rift opened during Pliensbachian – Aalenian. The central Atlantic and Alpine Tethys went into a drifting stage during the Middle Jurassic. The Late Jurassic (Oxfordian-Kimmeridgian history of the Pieniny/Magura Basin reflects strongest facial differentiation within sedimentary basin where mixed siliceous-carbonate sedimentation took place. Greatest deepening effect is indicated by widespread Oxfordian radiolarites, which occur in the all basinal successions, whereas the shallowest zone is completely devoid of siliceous intercalations at that time (sedimentation from Ammonitico Rosso facies up to coral reef limestone. The southern part of the North European Platform, north from the Pieniny/Magura realm, started to be rifted during Late Jurassic time and Silesian Basin in the Outer Western Carpathians and Sinaia Basin in the Eastern Carpathians, with black, mainly redeposited marls have been created. The outer sub-basins were differentiated during the latest (Hauterivian-Barremian phase of basinal development. The connection of Silesian Basin with Sinaia and Southern Carpathian Severin areas suggests the NW-SE direction of the basinal axis while the orientation of the Pieniny Klippen Belt/Magura Basin was SW-NE so, two Outer Carpathian perpendicular directions are possible within the basins. Major reorganization happened during the Tithonian-Berriasian time. It was reflected by both paleoceanographical and paleoclimatical changes. The Neo-Cimmerian tectonic events as well as main phase

  6. Trans-border (east Serbia/west Bulgaria correlation of the Jurassic sediments: Main Jurassic paleogeographic units

    Directory of Open Access Journals (Sweden)

    Tchoumatchenco Platon

    2006-01-01

    Full Text Available In the region across the Serbian/Bulgarian state border, there are individualized 5 Jurassic paleogeographic units (from West to East: (1 the Thracian Massif Unit without Jurassic sediments; (2 the Lužnica-Koniavo Unit - partially with Liassic in Grsten facies and with deep water Middle Callovian-Kimmeridgian (p. p sediments of the type "ammonitico rosso", and Upper Kimmeridgian-Tithonian siliciclastics flysch; (3 The Getic Unit subdivided into two subunits - the Western Getic Sub-Uni - without Lower Jurassic sediments and the Eastern Getic Sub-Unit with Lower Jurassic continental and marine sediments, which are followed in both sub-units by carbonate platform limestones (type Stramberk; (4 the Infra (Sub-Getic Unit - with relatively deep water Liassic and Dogger sediments (the Dogger of type "black shales with Bossitra alpine" and Middle Callovian-Tithonian of type "ammonitico rosso"; (5 the Danubian Unit - with shallow water Liassic, Dogger and Malm (Miroč-Vrška Čuka Zone, deep water Dogger and Malm (Donjomilanovačko-Novokoritska Zone.

  7. Coal petrology and genesis of Jurassic coal in the Ordos Basin, China

    Directory of Open Access Journals (Sweden)

    Weihua Ao

    2012-01-01

    Full Text Available Multiple sets of thick coal beds characterized by simple structure and shallow burial depth were developed in the Early and Middle Jurassic strata of the Ordos Basin, northwestern China. The huge reserves of this high quality coal have a high commercial value. We studied the coal’s petrologic characteristics and its maceral distribution to determine the maceral’s contribution to generation of oil and gas. The results show that the Jurassic coals in the Ordos Basin have special petrological features because of the Basin’s unique depositional environment which was mainly a series of high-stand swamps in the upper fluvial system. These petrographic features are a result of the development of typical inland lakes where some sand bodies were formed by migrating rivers. After burial, the peat continued to undergo oxidizing conditions, this process generated extensive higher inertinite contents in the coals and the vitrinite components were altered to semi-vitrinite. The macroscopic petrographic types of these Jurassic coals are mainly semi-dull coal, dull coal, semilustrous and lustrous coal. The proportions of semi-dull coal and dull coal are higher in the basin margins, especially in the area near the northern margin. The numbers of semilustrous and lustrous coals increase southwards and towards the central basin. This situation indicates that different coal-forming swamp environments have major controlling effects on the coal components. Another observation is that in the Ordos’ coal sequences, especially in the lower part, some sandstone beds are thick, up to 20 m with a coarse grain size. The higher fusinite content in the macerals accompanies a higher semi-vitrinite content with more complete and regular plant cell structure. The fusinite structure is clear and well preserved. After burial, the lithology of the roof and floor rocks can continue to affect the evolution of coal petrology. The sand bodies in the roof and floor exhibit good

  8. Dynamic triggering during rupture nucleation in sandstone

    Science.gov (United States)

    Schubnel, Alexandre; Chanard, Kristel; Latour, Soumaya; Petrelis, François; Hatano, Takahiro; Mair, Karen; Vinciguerra, Sergio

    2016-04-01

    Fluid induced stress perturbations in the crust at seismogenic depths can be caused by various sources, such as deglaciation unloading, magmatic intrusion or fluid injection and withdrawal. Numbers of studies have robustly shown their link to earthquake triggering. However, the role of small periodic stress variations induced by solid earth and oceanic tides or seasonal hydrology in the seismic cycle, of the order of a few kPa, remains unclear. Indeed, the existence or absence of correlation between these loading phenomena and earthquakes have been equally proposed in the literature. To investigate this question, we performed a set of triaxial deformation experiments on porous water-saturated Fontainebleau sandstones. Rock samples were loaded by the combined action of steps of constant stress (creep), intended to simulate tectonic loading and small sinusoidal pore pressure variations with a range of amplitudes, analogous to tides or seasonal loading. All tests were conducted at a regulated temperature of 35C and a constant 35 MPa confining pressure. Our experimental results show that (1) pore pressure oscillations do not seem to influence the deformation rate at which the rock fails, (2) they correlate with acoustic emissions. Even more interestingly, we observe a progressive increase of the correlation coefficient in time as the rock approaches failure. The correlation coefficient is also sensitive to the amplitude of pore pressure oscillations as larger oscillations produce higher correlation levels. Finally, we show that, in the last hours of creep before failure, acoustic emissions occur significantly more when the pore pressure is at its lowest. This suggest that the correlation of small stress perturbations and acoustic emissions depend on the state stress of a rock and the amplitude of the perturbations and that emissions occur more likely when cracks are unclamped.

  9. Environmental significance of foraminiferal assemblages dominated by small-sized Ammodiscus and Trochammina in Triassic and Jurassic delta-influenced deposits

    Science.gov (United States)

    Nagy, Jenö; Hess, Silvia; Alve, Elisabeth

    2010-04-01

    The sediment packages analyzed for benthic foraminifera consist of mudstones with interbedded sandstones deposited in shallow delta-influenced shelf to deltaic environments. The sections are located in Spitsbergen, the Barents Sea, northern North Sea and Yorkshire, and range in age from Late Triassic to Middle Jurassic. Salient features of the foraminiferal successions are: (1) The assemblages consist entirely or dominantly of agglutinated taxa. (2) The faunal diversities are extremely low. (3) The dominant genera are Ammodiscus and Trochammina. (4) The species are generally of small size compared to usual dimensions within the genera. The features listed above suggest that the assemblages were adapted to restricted conditions (clearly divergent from those of a normal marine shelf), where the main limiting factors were low salinity and reduced amount of dissolved oxygen in unstable, storm-influenced environments. Evidence for environmental conditions is obtained from modern analogues, although the large evolutionary changes in foraminifera during post-Jurassic time make it difficult to find such analogues. Additional information is derived from functional morphology, sedimentary features and paleogeography. The analyzed sediment packages show close faunal similarities suggesting opening of a marine pathway, which connected the paleo-Arctic Ocean with the western European shelf seas in Early Jurassic. A depositional biofacies model of the small-sized Ammodiscus- Trochammina assemblages envisages a delta-influenced shelf environment, where high freshwater influx would have created a density-stratified water column with a tendency to develop hypoxic conditions in its deeper parts. The depth interval between fair-weather and storm wave base (the offshore-transition zone) is indicated as the habitat of the small-sized Ammodiscus- Trochammina assemblages. In this zone, benthic biota would have been stressed by intermittent periods with moderate hypoxia combined with

  10. The Jurassic to Paleogene detrital record of the Central Asian Orogenic Belt: results from the Kyrgyz Tien Shan

    Science.gov (United States)

    De Pelsmaeker, Elien; Jolivet, Marc; Dransart Laborde, Amandine; Robin, Cécile; Zhimulev, Fedor; Poujol, Marc; Nachtergaele, Simon; Glorie, Stijn; De Clercq, Shana; Batalev, Vladislav; De Grave, Johan

    2017-04-01

    The Central Asian Orogenic Belt (CAOB) represents one of the largest Phanerozoic accretionary orogens in the world, pinched between North China - Tarim, Kazakhstan and the Siberian craton. It stretches from the Pamir in the southwest, over the Tien Shan, Junggar, Altai and Sayan mountain ranges to the Baikal rift in the northeast. The basement of the CAOB exists of various tectonic units that were assembled during several Paleozoic collision-accretion events. By the Permian, the accretionary tectonics in the CAOB culminated as all major composing units were joined. After final construction in the Late Paleozoic, the CAOB was subjected to several phases of Mesozoic deformation and was again reactivated in the Late Cenozoic as distant effect of the India-Eurasia collision. The Meso-Cenozoic reactivation episodes occurred in an intracontinental setting, related to tectonic far-field effects originating at the Eurasian margins. Subsequently intracontinental orogens, such as Tien Shan, were built superimposed on the inherited basement architecture and the erosion products of their exhuming mountain ranges accumulated in sedimentary basins. New sedimentological and detrital zircon U-Pb (LA-ICP-MS) results from several Jurassic to Paleogene sedimentary sections in Kyrgyzstan provide new insights in the Mesozoic - early Cenozoic geodynamic evolution and related basin-range interactions of the Kyrgyz Tien Shan. Studied sedimentary sections are located in the Fergana and Yarkand-Fergana basins to the west of the Talas-Fergana Fault (TFF) and in the Issyk-Kul and Ming-Kush-Kökömeren basins to the east of the TFF. The U-Pb ages of the post-Precambrian zircon grains found in 18 Jurassic to Paleogene sandstones, can be generally divided into four groups: Caledonian (470-390 Ma), Hercynian (315-260 Ma), Triassic (250-210 Ma) and Jurassic (190-160 Ma) ages. The differences in sedimentation pattern and detrital zircon U-Pb age components suggest that the TFF played an important

  11. Sandstone Diagenesis at Gale Crater, Mars, As Observed By Curiosity

    Science.gov (United States)

    Siebach, K. L.; Grotzinger, J. P.; McLennan, S. M.; Hurowitz, J.; Kah, L. C.; Edgett, K. S.; Williams, R. M. E.; Wiens, R. C.; Schieber, J.

    2014-12-01

    The Mars Science Laboratory rover, Curiosity, has encountered a significant number of poorly-sorted and very well-lithified sandstones along its traverse on the floor of Gale Crater. We use images from the hand-lens imager (MAHLI) and elemental chemistry from the ChemCam laser-induced breakdown spectroscopy instrument (LIBS) and the alpha-particle x-ray spectrometer (APXS) to begin to constrain the diagenetic history of these sandstones, including lithification and possible later dissolution. Investigation of MAHLI images reveals that the sediments are poorly-sorted and show very low apparent porosity, generally less than ~5%. However, in some cases, such as the Gillespie Lake sandstone identified in Yellowknife Bay, this apparent porosity includes a significant fraction of void spaces larger than typical sediment grain sizes (~30% by number or 75% of void spaces by area). One possible explanation of these larger pits is that they represent recent removal of soft intraclasts by eolian abrasion. Another possibility is that later diagenetic fluids caused dissolution of more soluble grains, and production of secondary porosity. Investigation into the elemental chemistry of the sandstones has shown that they have a relatively unaltered basaltic bulk composition in spite of possessing a variety of secondary minerals and amorphous material, indicating isochemical diagenetic processes. The chemistry and mineralogy of the cement is not immediately evident based on the initial analyses; there is not a high percentage of salts or evaporative minerals that may easily cement near-surface sandstones. Furthermore, these sandstones lack textures and compositions consistent with pedogenic processes, such as calcrete, silcrete, or ferricrete. Instead, they may record burial and cementation at depth. Cement composition may be constrained through comparison to terrestrial basaltic sandstones, and studying chemical variations along ChemCam and APXS transects of the rocks.

  12. Erosion characteristic of slope sandstone soaking in acid mine drainage

    Institute of Scientific and Technical Information of China (English)

    JIANG Li-chun; CHEN Jia-sheng; WU Ai-xiang

    2007-01-01

    Acid mine drainage(AMD) is one of the main reasons of slope instability in chemical mines with high sulfide. The pH values of the solution inside the mining pit decrease with the increasing of distance from ore body and vary from 1.2 to 4.6,according to the results of the water environmental investigation and the composition test of the slope sandstone in Xinqiao Pyrite Mine. Comparative experiments between original sandstone and AMD eroded sandstone samples show that after AMD erosion the uniaxial compressive strength and elastic modulus decrease by 30%-50% and 25%-45%, respectively, the cohesion and internal friction angle decrease obviously, and the Poisson ratio fluctuates between 0.20-0.29. The greater joints development, the higher residual stress after peak value, and the longer time to damage. Besides above, the reaction mechanism analysis of AMD eroded sandstone shows that the fillings in joints and fissures of sandstone are frequently decomposed and polyreacted, resulting in changes of interior molecule structure and framework composition, and decreases of cohesion and angle of internal friction between rock structure interfaces.

  13. Rock mechanics related to Jurassic underburden at Valdemar oil field

    DEFF Research Database (Denmark)

    Foged, Niels

    1999-01-01

    .It has been initiated as a feasibility study of the North Jens-1 core 12 taken in the top Jurassic clay shale as a test specimens for integrated petrological, mineralogical and rock mechanical studies. Following topics are studied:(1) Pore pressure generation due to conversion of organic matter...... and deformation properties of the clay shale using the actual core material or outcrop equivalents.(3) Flushing mechanisms for oil and gas from source rocks due to possibly very high pore water pressure creating unstable conditions in deeply burried sedimentsThere seems to be a need for integrating the knowledge...... in a number of geosciences to the benefit of common understanding of important reservoir mechanisms. Rock mechanics and geotechnical modelling might be key points for this understanding of reservoir geology and these may constitute a platform for future research in the maturing and migration from the Jurassic...

  14. A new carnivorous dinosaur from the Late Jurassic Solnhofen archipelago.

    Science.gov (United States)

    Göhlich, Ursula B; Chiappe, Luis M

    2006-03-16

    Small Late Jurassic theropod dinosaurs are rare worldwide. In Europe these carnivorous dinosaurs are represented primarily by only two skeletons of Compsognathus, neither of which is well preserved. Here we describe a small new theropod dinosaur from the Late Jurassic period of Schamhaupten in southern Germany. Being exquisitely preserved and complete from the snout to the distal third of the tail, the new fossil is the best-preserved predatory, non-avian dinosaur in Europe. It possesses a suite of characters that support its identification as a basal coelurosaur. A cladistic analysis indicates that the new taxon is closer to maniraptorans than to tyrannosauroids, grouping it with taxa often considered to be compsognathids. Large portions of integument are preserved along its tail. The absence of feathers or feather-like structures in a fossil phylogenetically nested within feathered theropods indicates that the evolution of these integumentary structures might be more complex than previously thought.

  15. A basal tyrannosauroid dinosaur from the Late Jurassic of China.

    Science.gov (United States)

    Xu, Xing; Clark, James M; Forster, Catherine A; Norell, Mark A; Erickson, Gregory M; Eberth, David A; Jia, Chengkai; Zhao, Qi

    2006-02-01

    The tyrannosauroid fossil record is mainly restricted to Cretaceous sediments of Laurasia, although some very fragmentary Jurassic specimens have been referred to this group. Here we report a new basal tyrannosauroid, Guanlong wucaii gen. et sp. nov., from the lower Upper Jurassic of the Junggar Basin, northwestern China. G. wucaii is the oldest known tyrannosauroid and shows several unexpectedly primitive pelvic features. Nevertheless, the limbs of G. wucaii share several features with derived coelurosaurs, and it possesses features shared by other coelurosaurian clades. This unusual combination of character states provides an insight into the poorly known early radiation of the Coelurosauria. Notably, the presumed predatory Guanlong has a large, fragile and highly pneumatic cranial crest that is among the most elaborate known in any non-avian dinosaur and could be comparable to some classical exaggerated ornamental traits among vertebrates.

  16. A mysterious giant ichthyosaur from the lowermost Jurassic of Wales

    Directory of Open Access Journals (Sweden)

    Jeremy E. Martin

    2015-12-01

    Full Text Available Ichthyosaurs rapidly diversified and colonised a wide range of ecological niches during the Early and Middle Triassic period, but experienced a major decline in diversity near the end of the Triassic. Timing and causes of this demise and the subsequent rapid radiation of the diverse, but less disparate, parvipelvian ichthyosaurs are still unknown, notably because of inadequate sampling in strata of latest Triassic age. Here, we describe an exceptionally large radius from Lower Jurassic deposits at Penarth near Cardiff, south Wales (UK the morphology of which places it within the giant Triassic shastasaurids. A tentative total body size estimate, based on a regression analysis of various complete ichthyosaur skeletons, yields a value of 12–15 m. The specimen is substantially younger than any previously reported last known occurrences of shastasaurids and implies a Lazarus range in the lowermost Jurassic for this ichthyosaur morphotype.

  17. Rock mechanics related to Jurassic underburden at Valdemar oil field

    DEFF Research Database (Denmark)

    Foged, Niels

    1999-01-01

    The presented study is a part of the Danish Energy Research project PRIORITY - Imroved Oil Recovery and Productivity from Lower Cretaceous Carbonates.It considers a multi-disciplinary study of the Jurassic shale underlying the Valdemar structure and gives a status of the on-going research work.......It has been initiated as a feasibility study of the North Jens-1 core 12 taken in the top Jurassic clay shale as a test specimens for integrated petrological, mineralogical and rock mechanical studies. Following topics are studied:(1) Pore pressure generation due to conversion of organic matter...... and deformation properties of the clay shale using the actual core material or outcrop equivalents.(3) Flushing mechanisms for oil and gas from source rocks due to possibly very high pore water pressure creating unstable conditions in deeply burried sedimentsThere seems to be a need for integrating the knowledge...

  18. The palaeogeography of Sundaland and Wallacea since the Late Jurassic

    OpenAIRE

    Robert Hall

    2013-01-01

    The continental core of Southeast (SE) Asia, Sundaland, was assembled from Gondwana fragments by the Early Mesozoic. Continental blocks rifted from Australia in the Jurassic [South West (SW) Borneo, East Java-West Sulawesi-Sumba], and the Woyla intraoceanic arc of Sumatra, were added to Sundaland in the Cretaceous. These fragments probably included emergent areas and could have carried a terrestrial flora and fauna. Sarawak, the offshore Luconia-Dangerous Grounds areas, and Palawan include As...

  19. MIDDLE TO LATE JURASSIC BIOFACIES OF SAUDI ARABIA

    Directory of Open Access Journals (Sweden)

    GERAINT W. HUGHES

    2004-03-01

    Full Text Available Saudi Arabian Jurassic carbonate hydrocarbon reservoirs were first examined stratigraphically using microfauna. Current microfaunal studies concentrate on the identification and constraint of palaeoenvironmental variations and determination of high-resolution depositional cyclicity of the reservoir carbonates. It is apparent that the environmental sensitivity of benthonic foraminifera provides a potentially valuable technique for the determining subtle variations in the depositional environment and also providing a proxy for sea-level fluctuations.

  20. Carbon cycle history through the Middle Jurassic of Hungary

    Science.gov (United States)

    Price, Gregory; Fozy, Istvan; Galacz, Andras

    2016-04-01

    A carbonate carbon isotope curve from the Aalenian-Bathonian interval is presented from the Obanya valley, of the Mecsek Mountains, Hungary. This interval is less well constrained and studied that other Jurassic time slices. The Obanya valley lies in the eastern part of the Mecsek Mountains, between Obanya and Kisujbanya and provides excellent exposures of a near continuous Aalenian to Lower Cretaceous sequence. It is not strongly affected by tectonics, as compared to other sections of eastern Mecsek of the same age. In parts, a rich fossil assemblage has been collected; the Bathonian ammonites are especially valuable as this locality. The pelagic Middle Jurassic is represented by thin-bedded limestones (the Obanya Limestone) and is overlain by Upper Jurassic siliceous limestones and radiolarites (the Fonyaszo Limestone). The new data indicates a series of positive anomalies within the late Aalenian and early-middle Bajocian. These data are comparable with carbonate carbon isotope recorded from other Tethyan margin sediments. Our integrated biostratigraphy and carbon isotope stratigraphy enables us to improve stratigraphic correlation and age determination of the examined strata.

  1. Archosaur evolution during the Jurassic: a southern perspective

    Directory of Open Access Journals (Sweden)

    Oliver W. M. Rauhut

    2008-12-01

    Full Text Available The fossil record of archosaurs - crocodylomorphs, pterosaurs and dinosaurs - from the Jurassic of the Southern Hemisphere is critically reviewed, and its evolutionary implications are evaluated. Although several important faunas and also isolated finds are known from Gondwana, the record in total is still very patchy, and any evolutionary scenario based on this record should be seen as tentative. Compared to the Northern Hemisphere, southern archosaurs are much more poorly known, which is especially true for terrestrial crocodiles and pterosaurs. Marine crocodiles are rather well represented in south-western South America, whereas the report of terrestrial archosaurs is currently best for Africa. However, in South America, important and especially promising archosaur faunas are known from the Callovian Cañadón Asfalto and the (?Tithonian Cañadón Calcáreo formations of Chubut province, Argentina. Early and Middle Jurassic Gondwanan archosaurs demonstrate that the faunas of that period still had a generally Pangean distribution, whereas first indications of differential archosaur evolution in the Northern and Southern Hemispheres are evident in Late Jurassic Gondwanan faunas.

  2. Effective Thermal Conductivity Modeling of Sandstones: SVM Framework Analysis

    Science.gov (United States)

    Rostami, Alireza; Masoudi, Mohammad; Ghaderi-Ardakani, Alireza; Arabloo, Milad; Amani, Mahmood

    2016-06-01

    Among the most significant physical characteristics of porous media, the effective thermal conductivity (ETC) is used for estimating the thermal enhanced oil recovery process efficiency, hydrocarbon reservoir thermal design, and numerical simulation. This paper reports the implementation of an innovative least square support vector machine (LS-SVM) algorithm for the development of enhanced model capable of predicting the ETCs of dry sandstones. By means of several statistical parameters, the validity of the presented model was evaluated. The prediction of the developed model for determining the ETCs of dry sandstones was in excellent agreement with the reported data with a coefficient of determination value ({R}2) of 0.983 and an average absolute relative deviation of 0.35 %. Results from present research show that the proposed LS-SVM model is robust, reliable, and efficient in calculating the ETCs of sandstones.

  3. Optical coherence tomography for vulnerability assessment of sandstone.

    Science.gov (United States)

    Bemand, Elizabeth; Liang, Haida

    2013-05-10

    Sandstone is an important cultural heritage material, in both architectural and natural settings, such as neolithic rock art panels. The majority of deterioration effects in porous materials such as sandstone are influenced by the presence and movement of water through the material. The presence of water within the porous network of a material results in changes in the optical coherence tomography signal intensity that can be used to monitor the wetting front of water penetration of dry porous materials at various depths. The technique is able to detect wetting front velocities from 1 cm s(-1) to 10(-6) cm s(-1), covering the full range of hydraulic conductivities likely to occur in natural sandstones from pervious to impervious.

  4. Thulium anomalies and rare earth element patterns in meteorites and Earth: Nebular fractionation and the nugget effect

    CERN Document Server

    Dauphas, N

    2015-01-01

    This study reports the bulk rare earth element (REEs, La-Lu) compositions of 41 chondrites, including 32 falls and 9 finds from carbonaceous (CI, CM, CO and CV), enstatite (EH and EL) and ordinary (H, L and LL) groups, as well as 2 enstatite achondrites (aubrite). The CI-chondrite-normalized REE patterns and Eu anomalies in ordinary and enstatite chondrites show more scatter in more metamorphosed than in unequilibrated chondrites. This is due to parent-body redistribution of the REEs in various carrier phases during metamorphism. The dispersion in REE patterns of equilibrated ordinary chondrites is explained by the nugget effect associated with concentration of REEs in minor phosphate grains. Terrestrial rocks and samples from ordinary and enstatite chondrites display negative Tm anomalies of ~-4.5 % relative to ca chondrites. In contrast, CM, CO and CV (except Allende) show no significant Tm anomalies. Allende CV chondrite shows large excess Tm (~+10 %). These anomalies are similar to those found in group II...

  5. JURASSIC PALAEOGEOGRAPHY OF THE TRANSDANUBIAN CENTRAL RANGE (HUNGARY

    Directory of Open Access Journals (Sweden)

    ATTILA VÖRÖS

    1998-03-01

    Full Text Available The Transdanubian Central Range (TCR is a flattened range of hills in northern Transdanubia (Hungary, formed mainly by Mesozoic carbonate rocks showing strong facies similarities with the Southern Alps and the Austroalpine domain. The Jurassic system is divided into several formations of predominantly pelagic limestones. Ammonoids are frequent and were collected bed-by-bed in numerous sections, providing an excellent biostratigraphic resolution. The thickness of the Jurassic system is usually small but changes along the strike of the TCR. It reaches a maximum thickness of 500 m in the western part; is very variable (10-400 m in the central segment (Bakony Mts. and rather low (less than 100 m in the east (Gerecse. In the Bakony segment, the thickness variation reflects the strongly dissected topography of the Jurassic sea-floor. Synsedimentary tectonics is dominated by normal faults; tilted blocks and listric faults may be inferred only in the east.Five main steps were identified in the palaeogeographic evolution: 1 Late Hettangian: carbonate oolitic shoals prevail, except for a few sites where non-deposition or neritic sediments occur. 2 Sinemurian and Pliensbachian: tectonic disintegration resulted in an intricate pattern of submarine horsts and intervening basins, with condensed sedimentation or non-deposition on the horsts and thicker, continuous sedimentary sequences in the basins. The submarine topographic highs are surrounded by aprons of redeposited material (scarp breccias, brachiopod coquinas, crinoidal calcarenites, spiculitic cherty limestones, while pure or argillaceous limestones (Rosso Ammonitico prevail in the distal areas. 3 Early Toarcian: the Tethys-wide anoxic event is superimposed on the previous submarine bottom topography; the resulting black shales and sedimentary Mn-ores are concentrated on the western sides of some horsts. 4 Dogger to Early Malm: radiolarites with heterochronous lower and upper boundaries (Aalenian to

  6. MINERALOGICAL CHARACTERIZATION OF SANDSTONE AND CLAY, NORTH-EAST CONSTANTINE.

    Directory of Open Access Journals (Sweden)

    M BENYAMINA

    2016-06-01

    Full Text Available The north-east area of Constantine has a very complex geological setting. The variety of sedimentary rocks such as sandstone and clay in abundance, represent a big importance in the industry and road infrastructure. The X-ray diffraction (XRD analysis, Scanning Electron Microscopy SEM/EDS, FTIR spectroscopy of sandstone and clay are required for qualitative and quantitative analysis of the existing phases. In addition, chemical analysis of the same samples is required to confirm the XRD, EDS (Energy Dispersive X ray Spectroscopy and FTIR spectroscopy results. The results of this multidisciplinary study, obtained by various analytical techniques, show a good agreement on the existing phases.

  7. The Jurassic of Denmark and Greenland: key elements in the reconstruction of the North Atlantic Jurassic rift system

    Directory of Open Access Journals (Sweden)

    Surlyk, Finn

    2003-10-01

    Full Text Available The Jurassic succession of Denmark is largely confined to the subsurface with the exception of exposures on the island of Bornholm in the Baltic Sea. In East Greenland, in contrast, the Jurassic is extensively exposed. Comparison of basin evolution in the two regions, which now occur on two separate plates, thus relies on highly different datasets. It is possible nevertheless to construct an integrated picture allowing testing of hypotheses concerning basin evolution, regional uplift, onset and climax of rifting, relative versus eustatic sea-level changes and sequence stratigraphic subdivision and correlation. On a smaller scale, it is possible to compare the signatures of sequence stratigraphic surfaces as seen on well logs, in cores and at outcrop and of sequences recognised and defined on the basis of very different data types. Breakdown of the successions into tectonostratigraphic megasequences highlights the high degree of similarity in overall basin evolution and tectonic style. An important difference, however, lies in the timing. Major events such as late Early - Middle Jurassic uplift, followed by onset of rifting, basin reorganisation and rift climax were delayed in East Greenland relative to the Danish region. This has important implications both for regional reconstructions of the rift system and for the understanding and testing of classical sequence stratigraphic concepts involving eustatic versus tectonic controls of basin evolution and stratigraphy.

  8. Temporal patterns in disparity and diversity of the Jurassic ammonoids of southern Germany

    Directory of Open Access Journals (Sweden)

    M. S. Simon

    2011-02-01

    Full Text Available A morphometric analysis of the characteristic whorl cross-sections of 1,200 Jurassic ammonoid species from southern Germany enabled us to characterise their morphospace. The successive Jurassic ammonoid faunas of southern Germany show characteristic patterns in morphospace occupation. While Early and Middle Jurassic ammonoids occupy limited areas of the morphospace range, the Late Jurassic ammonoids cover the entire spectrum. The ammonoids are characterised by an overall increase of both taxonomic diversity and morphological disparity in the course of the Jurassic. Strong fluctuations occur until the middle Late Jurassic, followed by a diversity decrease in the early Kimmeridgian and a disparity reduction in the early Tithonian. While diversity and disparity show similar progression during most of the Early Jurassic, they diverge subsequently and show only poor correlation until the end of the Jurassic. Particularly in the Middle Jurassic diversity and sea level changes correlate strongly. Neither temporal patterns in diversity nor disparity support the hypothesis of a mass extinction event in the early Toarcian. Significant changes in diversity and disparity in the early Callovian support a putative migration event of Boreal ammonoids into the Tethyan realm. doi:10.1002/mmng.201000016

  9. Geochemistry evidence for depositional settings and provenance of Jurassic argillaceous rocks of Jiyuan Basin, North China

    Indian Academy of Sciences (India)

    Yao Meng; Deshun Zheng; Minglong Li

    2017-02-01

    This paper aims to discuss the depositional settings and provenances for the Jurassic in Jiyuan basin, North China, based on the rare earth element (REE) and trace element features of 16 Jurassic argillaceous rock samples from the Anyao, Yangshuzhuang and Ma’ao Formations, respectively. Generally, geochemical analysis results show that chondrite-normalised REE distribution patterns of all the three formations are characterised by light-REE (LREE) enrichment, moderately negative Eu anomalies, slightly negative Ce anomalies, and strong fractionation between LREE and heavy-REE (HREE). Trace element proxies V/(V+Ni), Ceanom index, Ce/La, Sr/Ba, and Sr/Cu indicate a weak oxidation–reduction environment, progressively decreasing reducibility and water depth from the bottom up during Jurassic in Jiyuan basin. Palaeoclimate varied from humid in the Early Jurassic to arid in the Middle Jurassic, corresponding with the variations of palaeoredox and palaeosalinity. The provenances of Jurassic rocks in Jiyuan basin are mainly from felsic sources related to active continental margin and continental island arc. The Early–Middle Jurassic (Anyao and Yangshuzhuang Formations) provenances are mainly derived from North Qinling and partially from the eroded recycled felsic sedimentary covers of Taihang Mountain. In the late stage of Middle Jurassic (Ma’ao Formation), Taihang Mountain has been the primary source to Jiyuan basin. We conclude that the Jurassic rocks of Jiyuan basin reveal the progressive uplift and denudation processes of the Taihang Mountain.

  10. Cross-bedding related anisotropy and its interplay with various boundary conditions in the formation and orientation of joints in an aeolian sandstone

    Science.gov (United States)

    Deng, Shang; Cilona, Antonino; Morrow, Carolyn; Mapeli, Cesar; Liu, Chun; Lockner, David; Prasad, Manika; Aydin, Atilla

    2015-08-01

    Previous research revealed that the cross-bedding related anisotropy in Jurassic aeolian Aztec Sandstone cropping out in the Valley of Fire State Park, Nevada, affects the orientation of compaction bands, also known as anti-cracks or closing mode structures. We hypothesize that cross-bedding should have a similar influence on the orientation of the opening mode joints within the same rock at the same location. To test this hypothesis, we investigated the relationship between the orientation of cross-beds and the orientation of different categories of joint sets including cross-bed package confined joints and joint zones in the Aztec Sandstone. The field data show that the cross-bed package confined joints occur at high-angle to bedding and trend roughly parallel to the dip direction of the cross-beds. In comparison, the roughly N-S trending joint zones appear not to be influenced by the cross-beds in any significant way but frequently truncate against the dune boundaries. To characterize the anisotropy due to cross-bedding in the Aztec Sandstone, we measured the P-wave velocities parallel and perpendicular to bedding from 11 samples and determined an average P-wave anisotropy to be slightly larger than 13%. From these results, a model based on the generalized Hooke's law for anisotropic materials is used to analyze deformation of cross-bedded sandstone as a transversely isotropic material. In the analysis, the dip angle of cross-beds is assumed to be constant and the strike orientation varying from 0° to 359° in the east (x), north (y), and up (z) coordinate system. We find qualitative agreement between most of the model results and the observed field relations between cross-beds and the corresponding joint sets. The results also suggest that uniaxial extension (εzz > εxx = εyy = 0) and axisymmetric extension (εxx = εyy εzz) would amplify the influence of cross-bedding associated anisotropy on the joint orientation whereas a triaxial extension (εxx > εyy

  11. A New Look at the Magnetostratigraphy and Paleomagnetism of the Upper Triassic to Lower Jurassic Moenave Formation, St. George Area, Southwestern Utah.

    Science.gov (United States)

    Donohoo-Hurley, L. L.; Geissman, J. W.; Lucas, S. G.; Roy, M.

    2006-12-01

    Paleomagnetic data from rocks exposed on and off the Colorado Plateau provide poles that young westward during the Late Triassic (to about 52^{O} E longitude) and young eastward during the Early Jurassic. This pattern has been used to posit the existence of a J-1 cusp in the North American APW path at the Triassic- Jurassic boundary (TJB), at about 199.6 Ma. Considerable debate has focused on the morphology and placement of the J-1 cusp due to poorly exposed and/or incompletely sampled sections, debates about the magnitude of Colorado Plateau rotation, and disagreements regarding stratigraphic relationships. Red beds of the Whitmore Point (~25 m of mostly lacustrine deposits) and Dinosaur Canyon (~55 m of hematitic fluvial sandstones and siltstones) members of the Moenave Formation (MF) are inferred to have been deposited across the TJB based on palynostratigraphy and vertebrate biostratigraphy. Two previously unsampled sections (Leeds and Warner Valley) of the MF are well exposed near St. George, Utah, and located in the transition zone that defines the western boundary of the Colorado Plateau. Preliminary data from samples collected from the Whitmore Point and Dinosaur Canyon members yield exclusively normal polarity magnetizations, which is consistent with previous studies and the normal polarity TJB magnetozone. Thermal demagnetization response suggests that the remanence is carried mainly in hematite. The degree of hematite pigmentation varies in both sections, and several Leeds sites show a weak overprint component that unblocks by 400^{O}-450^{O} C, with a higher unblocking temperature components, consistent with an Early Triassic Late Jurassic age that fully unblock around 670^{O}-680^{O} C. Individual beds (treated as specific sites) in part of the Dinosaur Canyon Member yield site mean directions with declinations between about 020 and 030, and may define the easternmost position (i.e. 60-50^{O} E latitude) of the NAMAPW path and thus the approximate the

  12. Trilobites from the Middle Ordovician Stairway Sandstone, Amadeus Basin, central Australia

    DEFF Research Database (Denmark)

    Jakobsen, Kristian Grube; Nielsen, Arne Thorshøj; Harper, David Alexander Taylor;

    2014-01-01

    During the Middle Ordovician (Darriwilian) sandstones and siltstones were deposited in the epicontinental Larapintine Sea, which covered large parts of central Australia. The Darriwilian Stairway Sandstone has, for the first time, been sampled stratigraphically for macrofossils to track marine be...

  13. Cathodoluminescence investigations on quartz cement in sandstones of Khabour Formation from Iraqi Kurdistan region, northern Iraq

    DEFF Research Database (Denmark)

    Omer, Muhamed Fakhri; Friis, Henrik

    The Ordovician deltaic to shallow marine Khabour Formation in Northern Iraq consists mainly of sandstone with minor siltstone and interbedded shale. The sandstones are pervasively cemented by quartz that resulted in very little preserved primary porosity. Cathodoluminescence and petrographic stud...

  14. Altitude of the bottom of the Trinidad Sandstone in the Raton Basin, Las Animas County, Colorado

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This data set consists of structure contours that show lines of equal altitude of the bottom of the Trinidad Sandstone, the contact between the Trinidad Sandstone...

  15. Continuity and internal properties of Gulf Coast sandstones and their implications for geopressured fluid production

    Energy Technology Data Exchange (ETDEWEB)

    Morton, R.A.; Ewing, T.E.; Tyler, N.

    1983-01-01

    The intrinsic properties of the genetic sandstone units that typify many geopressured geothermal aquifers and hydrocarbon reservoirs in the Gulf Coast region were systematically investigated classified, and differentiated. The following topics are coverd: structural and stratigraphic limits of sandstone reservoirs, characteristics and dimensions of Gulf Coast sandstones; fault-compartment areas; comparison of production and geologic estimates of aquifer fluid volume; geologic setting and reservoir characteristics, Wells of Opportunity; internal properties of sandstones; and implications for geopressured fluid production. (MHR)

  16. The effect of hot water injection on sandstone permeability

    DEFF Research Database (Denmark)

    Rosenbrand, Esther; Haugwitz, Christian; Jacobsen, Peter Sally Munch;

    2014-01-01

    Seasonal energy storage can be achieved by hot water injection in geothermal sandstone aquifers. We present an analysis of literature data in combination with new short-term flow through permeability experiments in order to address physical and physico-chemical mechanisms that can alter...

  17. DELAYED POLYMER CROSSLINKING USED FOR PROFILE CONTROL IN SANDSTONE RESERVOIRS

    Institute of Scientific and Technical Information of China (English)

    Wang Zhongmao; Dong Bo; Fu Xiaofeng; Rong Jiashu

    1997-01-01

    @@ Most of the oil reservoirs in Jilin province occur in fractured sandstone with low permeability and heavy heterogeneity. In addition, with fracture development, the artificial fractures around producing wells and water injection wells have been increased, further aggravating the heterogeneity of oil reservoirs.

  18. Diagenesis, provenance and depositional environments of the Bunter Sandstone Formation

    DEFF Research Database (Denmark)

    Olivarius, Mette; Weibel, Rikke; Friis, Henrik

    The Bunter Sandstone Formation in the northern North German Basin has large geothermal potential with high porosity and permeability (generally >15% and >100 mD, respectively) and with pore fluid temperatures that are adequate for geothermal energy production (c. 55–60˚C). A combined investigatio...

  19. Inelastic compaction, dilation and hysteresis of sandstones under hydrostatic conditions

    Science.gov (United States)

    Shalev, Eyal; Lyakhovsky, Vladimir; Ougier-Simonin, Audrey; Hamiel, Yariv; Zhu, Wenlu

    2014-05-01

    Sandstones display non-linear and inelastic behaviour such as hysteresis when subjected to cyclic loading. We present three hydrostatic compaction experiments with multiple loading-unloading cycles on Berea and Darley Dale sandstones and explain their hysteretic behaviour using non-linear inelastic compaction and dilation. Each experiment included eight to nine loading-unloading cycles with increasing maximum pressure in each subsequent cycle. Different pressure-volumetric strain relations during loading and unloading were observed. During the first cycles, under relatively low pressures, not all of the volumetric strain is recovered at the end of each cycle whereas at the last cycles, under relatively high pressures, the strain is recovered and the pressure-volumetric strain hysteresis loops are closed. The observed pressure-volumetric strain relations are non-linear and the effective bulk modulus of the sandstones changes between cycles. Observations are modelled with two inelastic deformation processes: irreversible compaction caused by changes in grain packing and recoverable compaction associated with grain contact adhesion, frictional sliding on grains or frictional sliding on cracks. The irreversible compaction is suggested to reflect rearrangement of grains into a more compact mode as the maximum pressure increases. Our model describes the `inelastic compaction envelope' in which sandstone sample will follow during hydrostatic loading. Irreversible compaction occurs when pressure is greater than a threshold value defined by the `inelastic compaction envelope'.

  20. Latest Jurassic-early Cretaceous regressive facies, northeast Africa craton

    Energy Technology Data Exchange (ETDEWEB)

    van Houten, F.B.

    1980-06-01

    Nonmarine to paralic detrital deposits accumulated in six large basins between Algeria and the Arabo-Nubian shield during major regression in latest Jurassic and Early Cretaceous time. The Ghadames Sirte (north-central Libya), and Northern (Egypt) basins lay along the cratonic margin of northeastern Africa. The Murzuk, Kufra, and Southern (Egypt) basins lay in the south within the craton. Data for reconstructing distribution, facies, and thickness of relevant sequences are adequate for the three northern basins only. High detrital influx near the end of Jurassic time and in mid-Cretaceous time produced regressive nubian facies composed largely of low-sinuosity stream and fahdelta deposits. In the west and southwest the Ghadames, Murzuk, and Kufra basins were filled with a few hundred meters of detritus after long-continued earlier Mesozoic aggradation. In northern Egypt the regressive sequence succeeded earlier Mesozoic marine sedimentation; in the Sirte and Southern basins correlative deposits accumulated on Precambrian and Variscan terranes after earlier Mesozoic uplift and erosion. Waning of detrital influx into southern Tunisia and adjacent Libya in the west and into Israel in the east initiated an Albian to early Cenomanian transgression of Tethys. By late Cenomanian time it had flooded the entire cratonic margin, and spread southward into the Murzuk and Southern basins, as well as onto the Arabo-Nubian shield. Latest Jurassic-earliest Cretaceous, mid-Cretaceous, and Late Cretaceous transgressions across northeastern Africa recorded in these sequences may reflect worldwide eustatic sea-level rises. In contrast, renewed large supply of detritus during each regression and a comparable subsidence history of intracratonic and marginal basins imply regional tectonic control. 6 figures.

  1. Newly discovered Jurassic skarnfields in the Ecuadorian Andes

    Science.gov (United States)

    Litherland, M.; Fortey, N. J.; Beddoe-Stephens, B.

    1992-08-01

    A series of calcic magnetite skarn klippen in the north of the Cordillera Real are interpreted as erosional relics of a great skarn sheet, over 150 km long, formed by thrusting of island-arc type sediments and volcanics over the Jurassic Azafran batholith during an accretion event. The skarns are contrasted petrographically and compositionally with those of the Nambija field in the south of the Cordillera, which probably relates to the same chain of batholiths. However, the Nambija skarns are autochthonous and rich in gold, with Au:Ag ratios in the region of 20:1, whereas those to the north are allochthonous and relatively barren.

  2. An arboreal docodont from the Jurassic and mammaliaform ecological diversification

    Science.gov (United States)

    Meng, Qing-Jin; Ji, Qiang; Zhang, Yu-Guang; Liu, Di; Grossnickle, David M.; Luo, Zhe-Xi

    2015-02-01

    A new docodontan mammaliaform from the Middle Jurassic of China has skeletal features for climbing and dental characters indicative of an omnivorous diet that included plant sap. This fossil expands the range of known locomotor adaptations in docodontans to include climbing, in addition to digging and swimming. It further shows that some docodontans had a diet with a substantial herbivorous component, distinctive from the faunivorous diets previously reported in other members of this clade. This reveals a greater ecological diversity in an early mammaliaform clade at a more fundamental taxonomic level not only between major clades as previously thought.

  3. Supergene neoformation of Pt-Ir-Fe-Ni alloys: multistage grains explain nugget formation in Ni-laterites

    Science.gov (United States)

    Aiglsperger, Thomas; Proenza, Joaquín A.; Font-Bardia, Mercè; Baurier-Aymat, Sandra; Galí, Salvador; Lewis, John F.; Longo, Francisco

    2016-11-01

    Ni-laterites from the Dominican Republic host rare but extremely platinum-group element (PGE)-rich chromitites (up to 17.5 ppm) without economic significance. These chromitites occur either included in saprolite (beneath the Mg discontinuity) or as `floating chromitites' within limonite (above the Mg discontinuity). Both chromitite types have similar iridium-group PGE (IPGE)-enriched chondrite normalized patterns; however, chromitites included in limonite show a pronounced positive Pt anomaly. Investigation of heavy mineral concentrates, obtained via hydroseparation techniques, led to the discovery of multistage PGE grains: (i) Os-Ru-Fe-(Ir) grains of porous appearance are overgrown by (ii) Ni-Fe-Ir and Ir-Fe-Ni-(Pt) phases which are overgrown by (iii) Pt-Ir-Fe-Ni mineral phases. Whereas Ir-dominated overgrowths prevail in chromitites from the saprolite, Pt-dominated overgrowths are observed within floating chromitites. The following formation model for multistage PGE grains is discussed: (i) hypogene platinum-group minerals (PGM) (e.g. laurite) are transformed to secondary PGM by desulphurization during serpentinization; (ii) at the stages of serpentinization and/or at the early stages of lateritization, Ir is mobilized and recrystallizes on porous surfaces of secondary PGM (serving as a natural catalyst) and (iii) at the late stages of lateritization, biogenic mediated neoformation (and accumulation) of Pt-Ir-Fe-Ni nanoparticles occurs. The evidence presented in this work demonstrates that in situ growth of Pt-Ir-Fe-Ni alloy nuggets of isometric symmetry is possible within Ni-laterites from the Dominican Republic.

  4. Tectonic forcing of early to middle jurassic seawater Sr/Ca

    DEFF Research Database (Denmark)

    Ullmann, Clemens Vinzenz; Hesselbo, Stephen P.; Korte, Christoph

    2013-01-01

    The Jurassic Period (ca. 201–145 Ma) is marked by fundamental reorganizations of paleogeography, paleoceanography, ecosystems, and the progressive shift from aragonite to calcite as the favored marine biogenic carbonate polymorph. Sr/Ca ratios of well-preserved Jurassic oysters and belemnites from...

  5. Multidisciplinary studies on ancient sandstone quarries of Western Sardinia (Italy).

    Science.gov (United States)

    Grillo, Silvana Maria; Del Vais, Carla; Naitza, Stefano

    2013-04-01

    The ancient coastal quarries of Mediterranean are increasingly considered geosites of multidisciplinary relevance. They are sites of historical-archaeological interest that show ancient techniques of stone extraction; they are significant for cultural heritage conservation and restoration, as sources of the stones used in ancient buildings and monuments; they are sites of geological relevance, as often retain important stratigraphic sections; they are also useful markers of secular changes in the sea level. A multisciplinary study is in progress on the ancient quarries of the Sinis region (western Sardinia island), integrating archaeological, geological, minero-petrographical data. In Sardinia, coastal quarries have been established from Punic and Roman times. Many of them exploited Quaternary sediments along the southern and western coasts of the island. They consist of middle-late Pleistocene marine conglomerates and carbonate sandstones, and of coastal (aeolian) carbonate sandstones. Sandstone blocks of different sizes have been widely used in ancient cities for buildings, defensive works, harbours, etc. Three main areas of stone extraction (San Giovanni di Sinis, Punta Maimoni, Is Arutas) have been so far recognized in the Sinis. GIS-supported mapping and documentation of the sites includes their geology and stratigraphy, the extension and layout of the quarries, and an evaluation of volumes of extracted rocks. Documented archaeological evidences include ancient extraction fronts, spoil heaps, working areas, working traces in the old fronts, transport routes of blocks, and traces of loading facilities. The study is aimed at reconstructing the relationships of the quarries with the urban areas of Sinis, as the ancient Punic-Roman city of Tharros. Consequently, a minero-petrographical characterization (optical microscopy, XRD) is performed on sandstones sampled in each quarry, and in historical buildings in Tharros and other centres of the region (Cabras

  6. A New Theropod Dinosaur from the Middle Jurassic of Lufeng, Yunnan, China

    Institute of Scientific and Technical Information of China (English)

    WU Xiao-chun; Philip J.CURRIE; DONG Zhiming; PAN Shigang; WANG Tao

    2009-01-01

    A new theropod dinosaur,Shidaisaurusjinae gen.et sp.nov.,has been described on the basis of an incomplete skeleton.The specimen was found near the base of the Upper Lufeng Formation(early Middle Jurassic)in Yunnan,China.It is the first theropod dinosaur from the Middle Jurassic of Yunnan.Shidaisaurus jinae is distinguishable from other Jurassic theropods by certain features from the braincase,axis,and pelvic girdle.The absence of any pleurocoels in the axis or in any anterior dorsal vertebrae suggests that the new Lufeng theropod is relatively primitive and more plesiomorphic than most of the Middle to Late Jurassic theropods from China.Most Chinese taxa of Jurassic theropod dinosaurs have not been well described;a further detailed study will be necessary for us to determine their phylogenetic relationships with Shidaisaurus jinae.

  7. Traces of the heritage arising from the Macelj sandstone

    Science.gov (United States)

    Golež, Mateja

    2014-05-01

    The landscape of Southeast Slovenia and its stone heritage principally reveal itself through various Miocene sandstones. The most frequently found type on the borderline between Slovenia and Croatia, i.e. east of Rogatec, is the micaceous-quartz Macelj sandstone. This rock ranges in colour from greenish grey to bluish grey and yellowish, depending on the content of glauconite, which colours it green. In its composition, the rock is a heterogeneous mixture of grains of quartz, dolomite, muscovite, microcline, anorthite and glauconite. The average size of grains is 300μm. In cross-section, they are oblong, semi-rounded or round. The mechanical-physical and durability properties of the Macelj sandstone, which have been characterised pursuant to the applicable standards for natural stone, reveal that the rock exhibits poor resistance to active substances from the atmosphere, particularly in the presence of salt. In the surroundings of Rogatec, there are around 45 abandoned quarries of the Macelj sandstone, which are the result of the exploitation of this mineral resource from the 17th century on. The local quarrymen earned their bread until 1957, when the Kambrus quarry industry closed down. From the original use of this mineral resource as construction and decorative material, the useful value of the Macelj sandstone expanded during the development of the metals industry to the manufacture of large and small grindstones for the needs of the domestic and international market. Therefore, traces of quarrying can not only be seen in the disused quarries, but also in the rich architectural heritage of Rogatec and its surroundings, the stone furniture - from portals, window frames, wells, various troughs, pavements to stone walls - and other. The living quarrying heritage slowly passed into oblivion after World War II, although the analysis of the social image of the people residing in Rogatec and its surroundings revealed that there was an average of one stonemason in

  8. Origins of massive-type sandstones in braided river systems

    Science.gov (United States)

    Martin, Charlotte A. L.; Turner, Brian R.

    1998-07-01

    This study details largely ignored massive-type, predominantly structureless sandstones preserved within braided fluvial successions of Carboniferous to Triassic age. Architectural element analysis reveals that these sediments were deposited within sand-dominated perennial systems of low braiding index. Cross-stratified braid bar deposits are interbedded with, and laterally equivalent to geometrically distinct, largely structureless massive-type sandbodies identified as two separate architectural elements: channel-like (SMC) and sheet-like (SMS). Sub-divisions within these broad categories define six geometric units which are texturally distinct from each other and from the structured sediments of the same lithological unit. Since massive-type sandstone elements have many features in common with the deposits of highly concentrated, laminar sediment/water flows, they are interpreted in terms of similar depositional processes. SMC elements form elongate channel-like features which trend both at high angles to, and parallel with, the palaeoflow of host fluvial channels. The lower bounding surfaces of SMC elements may be either erosive or non-erosive, and describe symmetrical cross-sections with margins dipping debris flows related to fluvial bank and/or bar collapse. SMS elements form sandsheets up to 8 m in thickness which may be traced >250 m parallel and transverse to the fluvial palaeoflow direction established from cross-stratified sandstones of adjacent architectural elements. The basal surface of SMS elements may either be undulose (where the sandbodies are termed SMSU) or erosional (where they are termed SMSE). Internally SMSU elements preserve parallel laminae marginal to basal scours, diffuse sweeping laminae, isolated cross-sets and water escape structures. The SMSU sediments are compositionally identical to the structured sandstones with which they are associated and are interpreted as the result of deposition from highly concentrated stream flows

  9. Transgression regression event element geochemistry records of southwestern Fujian in Late Triassic-Middle Jurassic

    Institute of Scientific and Technical Information of China (English)

    许中杰; 程日辉; 张莉; 王嘹亮

    2013-01-01

    Southwest Fujian area has experienced a large-scale transgression regression cycle in Late Triassic-Middle Jurassic and the maximum transgression has taken place in Early Jurassic. The migration and enrichment of geochemical element in the continuous fine-grained sediments in the basin recorded the paleosalinity and the paleodepth. The changes of paleosalinity and paleodepth indicate the sea(lake) level relative change in every period of Late Triassic-Middle Jurassic in southwestern Fujian. The relative change curve of sea(lake) level in southwestern Fujian is established based on the m value(m=100×w(MgO)/w(Al2 O3)) and the ratios of w(B)/w(Ga), w(Sr)/w(Ba) and w(Ca)/w(Mg). The curve indicates that level I sea-level relative change in southwestern Fujian is composed of the transgression in Late Triassic-Early Jurassic and the regression in the late period of Early Jurassic-Middle Jurassic. The level III sea-level relative change is frequent, which is composed by the lake level descent lake level rise lake level descent of Wenbin Shan formation in Late Triassic, the regression transgression regression of Lishan formation in Early Jurassic and the lake level rise lake level descent-lake level rise lake level descent of Zhangping formation in Middle Jurassic. The transgression regression cycle in southwestern Fujian is significantly controlled by the sea-level change in the north of South China Sea. The relative change curve trends of the level I sea-level in the north of South China Sea and the one in southwestern Fujian are the same. The maximum transgressions both occur in Early Jurassic. The level III sea-level curve reflects the fluctuation of a transgression and two regressions in the early period of Early Jurassic.

  10. Amphibious flies and paedomorphism in the Jurassic period.

    Science.gov (United States)

    Huang, Diying; Nel, André; Cai, Chenyang; Lin, Qibin; Engel, Michael S

    2013-03-01

    The species of the Strashilidae (strashilids) have been the most perplexing of fossil insects from the Jurassic period of Russia and China. They have been widely considered to be ectoparasites of pterosaurs or feathered dinosaurs, based on the putative presence of piercing and sucking mouthparts and hind tibio-basitarsal pincers purportedly used to fix onto the host's hairs or feathers. Both the supposed host and parasite occur in the Daohugou beds from the Middle Jurassic epoch of China (approximately 165 million years ago). Here we analyse the morphology of strashilids from the Daohugou beds, and reach markedly different conclusions; namely that strashilids are highly specialized flies (Diptera) bearing large membranous wings, with substantial sexual dimorphism of the hind legs and abdominal extensions. The idea that they belong to an extinct order is unsupported, and the lineage can be placed within the true flies. In terms of major morphological and inferred behavioural features, strashilids resemble the recent (extant) and relict members of the aquatic fly family Nymphomyiidae. Their ontogeny are distinguished by the persistence in adult males of larval abdominal respiratory gills, representing a unique case of paedomorphism among endopterygote insects. Adult strashilids were probably aquatic or amphibious, shedding their wings after emergence and mating in the water.

  11. Triassic-Jurassic pteridosperms of Australasia: speciation, diversity and decline

    Energy Technology Data Exchange (ETDEWEB)

    Pattemore, G. A.; Rigby, J. F.; Playford, G.

    2015-07-01

    Pteridosperms are preserved abundantly in the Gondwanan Triassic, with many species exhibiting consider- able morphological variation that has been attributed to a hybridization model of speciation. This is an improbable explanation given that hybridization is very rare in gymnosperms. Allopatric speciation resulting from geographic and climatic provincialism is a more likely explanation for the morphological diversity which is well represented in Anisian Norian (Middle and Upper Triassic) floras of Australasia and elsewhere in Gondwana. Most specimens are distributed among three families: Umkomasiaceae, Peltaspermaceae and Matatiellaceae. These families, together with other possibly pteridospermous genera, are reviewed herein. Diversity in these families apparently declined by the Rhaetian and they did not persist into the Gondwanan post-Triassic. Australasian post-Triassic strata contain remarkably different floral assemblages to those of the Triassic. No fructifications are clearly pteridospermous and no remains show any obvious relationship with pteridosperms of the Gondwanan Triassic. Caytonialean fructifications are not known in Australasian strata; however, associated foliage has been reported from the Eastern Gondwanan Upper Triassic through Middle Jurassic including Australia. Much fern-like foliage, claimed to be pteridospermous from the Lower Jurassic through Eocene of Eastern Gondwana, lacks supporting evidence of such affiliation. (Author)

  12. Jurassic and Cretaceous clays of the northern and central North Sea hydrocarbon reservoirs reviewed

    Energy Technology Data Exchange (ETDEWEB)

    Wilkinson, M.; Haszeldine, R.S.; Fallick, A.E.

    2006-03-15

    illite occurs almost ubiquitously within the clastic sediments of the North Sea. An early pore-lining phase has been interpreted as both infiltrated clastic clay, and as an early diagenetic phase. Early clays may have been quite smectite-rich illites, or even discrete smectites. Later, fibrous illite is undoubtedly neoformed, and can degrade reservoir quality significantly. Both within sandstones and shales, there is an apparent increase in the K content deeper than 4 km of burial, which could be due to dilution of the early smectite-rich phase by new growth illite, or to the progressive illitization of existing I-S. Much of the 'illite' that has been dated by the K-Ar method may therefore actually be I-S. The factors that control the formation of fibrous illite are only poorly known, though temperature must play a role. Illite growth has been proposed for almost the entire range of diagenetic temperatures (e.g. 15-20{sup o}C, Brent Group; 35-40{sup o}C, Oxfordian Sand, Inner Moray Firth; 50-90{sup o}C, Brae formation; 100-110{sup o}C, Brent Group; 130-140{sup o}C, Haltenbanken). It seems unlikely that there is a threshold temperature below which illite growth is impossible (or too slow to be significant), though this is a recurring hypothesis in the literature. Instead, illite growth seems to be an event, commonly triggered by oil emplacement or another change in the physiochemical conditions within the sandstone, such as an episode of overpressure release. Hence fibrous illite can grow at any temperature encountered during diagenesis. Although there is an extensive dataset of K-Ar ages of authigenic illites from the Jurassic of the North Sea, there is no consensus as to whether the data are meaningful, or whether the purified illite samples prepared for analysis are so contaminated with detrital phases as to render the age data meaningless. At present it is unclear about how to resolve this problem, though there is some indication that chemical micro

  13. Effect Of Hot Water Injection On Sandstone Permeability

    DEFF Research Database (Denmark)

    Rosenbrand, Esther; Fabricius, Ida Lykke

    2012-01-01

    The seasonal imbalance between supply and demand of renewable energy requires temporary storage, which can be achieved by hot water injection in warm aquifers. This requires that the permeability and porosity of the aquifer are not reduced significantly by heating. We present an overview...... of published results regarding the effect of temperature on sandstone permeability. These tests are performed with mineral oil, nitrogen gas, distilled water and solutions of NaCl, KCl, CaCl2 as well as brines that contain a mixture of salts. Thirteen sandstone formations, ranging from quartz arenites...... not account for all the permeability reductions observed. Permeablity reduction occurs both when distilled water is the saturating fluid as well as in tests with NaCl, KCl or CaCl2 solutions, however, this is not the case in tests with mineral oil or nitrogen gas. The formation of a filter cake or influx...

  14. Comparative study between Botucatu and Berea sandstone properties

    Science.gov (United States)

    Cardoso, Oldemar Ribeiro; Balaban, Rosangela de Carvalho

    2015-10-01

    The aim of the present study is the analysis and comparison between Berea and Botucatu sandstone, concerning the problems with regard to the loss of permeability or water sensitivity or loss of hydraulic conductivity due to the presence of swelling or non-swelling clays. Some porous volumes of synthetic seawater of different salinities were displaced through the porous media of Berea and Botucatu formations. It was observed that even the plugs of Berea, with no-swelling clays in their composition, had the permeability reduced as soon as the brine salinity reached a lower limit. As expected, the same occurred with the Botucatu sandstone samples, however, in this case,the sensitivity to the low salinity was much more effective.

  15. Study of microwave response of coal and sandstone samples

    Science.gov (United States)

    Singh, R.; Singh, Ramesh P.; Singh, K. P.

    1980-07-01

    Detailed measurements of relative dielectric constant and loss tangent of coal and sandstone samples have been carried out in the X-band of microwave frequency range (8-10 GHz). The effect of moisture, saline and petrol content on the dielectric and loss tangent has been studied. The reflection and transmission coefficient of these samples have been computed. The application of such measurements to geophysical prospecting has been discussed.

  16. New Acid Combination for a Successful Sandstone Acidizing

    Science.gov (United States)

    Shafiq, M. U.; Mahmud, H. K. B.; Rezaee, R.

    2017-05-01

    With the development of new enhanced oil recovery techniques, sandstone acidizing has been introduced and played a pivotal role in the petroleum industry. Different acid combinations have been applied, which react with the formation, dissolve the soluble particles; thus increase the production of hydrocarbons. To solve the problems which occurred using current preflush sandstone acidizing technology (hydrochloric acid); a new acid combination has been developed. Core flooding experiments on sandstone core samples with dimensions 1.5 in. × 3 in. were conducted at a flow rate of 2 cm3/min. A series of hydrochloric-acetic acid mixtures with different ratios were tested under 150°F temperature. The core flooding experiments performed are aimed to dissolve carbonate, sodium, potassium and calcium particles from the core samples. These experiments are followed by few important tests which include, porosity-permeability, pH value, Inductively Coupled Plasma (ICP) analysis and Nuclear Magnetic Resonance (NMR measurements). All the results are compared with the results of conventional hydrochloric acid technology. NMR and porosity analysis concluded that the new acid combination is more effective in creating fresh pore spaces and thus increasing the reservoir permeability. It can be seen from the pore distribution before and after the acidizing. Prior applying acid; the large size of pores appears most frequently in the pore distribution while with the applied acid, it was found that the small pore size is most the predominant of the pore distribution. These results are validated using ICP analysis which shows the effective removal of calcium and other positive ions from the core sample. This study concludes that the combination of acetic-hydrochloric acid can be a potential candidate for the preflush stage of sandstone acidizing at high temperature reservoirs.

  17. Strength and elastic properties of sandstone under different testing conditions

    Institute of Scientific and Technical Information of China (English)

    CHEN Yun-ping; WANG Si-jing; WANG En-zhi

    2007-01-01

    A laboratory experimental program performed on Wuhan sandstones was presented under monotonic loading, partial cyclic loading during loading path and sine wave cyclic loading with different strain rates to compare uniaxial compression strength and elastic properties (elastic modulus and Poisson ratio) under different conditions and influence of pore fluid on them. When the loading strain rates are 10-5, 10-4 and 10-3/s, uniaxial compression strengths of dry sandstones are 82.3, 126.6 and 141.6 MPa,respectively, and that of water saturated sandstones are 70.5, 108.3 and 124.1 MPa, respectively. The above results show that the uniaxial compression strength increases with the increase of strain rate, however, variation of softening coefficient is insignificant.Under monotonic loading condition, tangent modulus increases with an increment of stress (strain) to a maximum value at a certain stress level, beyond which it starts to decline. Under the partial cyclic loading during loading path condition, unloading or reloading modulus is larger than loading modulus, and unloading and reloading moduli are almost constants with respect to stress level,especially unloading modulus. Under the sine wave cyclic loading condition, tangent modulus and Poisson ratio display asymmetric 'X' shape with various strain, and the average unloading modulus is larger than the average loading modulus.

  18. Calcium lignosulfonate adsorption and desorption on Berea sandstone.

    Science.gov (United States)

    Grigg, Reid B; Bai, Baojun

    2004-11-01

    This paper describes adsorption and desorption studies carried out with calcium lignosulfonate (CLS) on Berea sandstone. Circulation experiments were performed to determine CLS adsorption isotherms and the effects of CLS concentration, temperature, salinity, brine hardness, and injection rate on adsorption density. Flow-through experiments were performed to assess the reversibility of CLS adsorption and the influence of postflush rate, brine concentration, brine hardness, brine pH, and temperature on the desorption process. Results indicate that CLS adsorption isotherms on Berea sandstone follow the Freundlich isotherm law. The results presented in this paper on the effects of CLS adsorption and desorption on Berea sandstone show that: (1) increasing CLS concentration and salinity increases CLS adsorption density; (2) increasing temperature will decrease adsorption density; (3) increasing injection rate of CLS solution will slightly decrease CLS adsorption density; (4) postflush rate and salinity of brine have a large impact on the CLS desorption process; (5) the adsorption and desorption process are not completely reversible; and (5) temperature and pH of the postflush brine have little effect on desorption.

  19. Unraveling multiple provenance areas using sandstone petrofacies and geochemistry: An example in the southern flank of the Golfo San Jorge Basin (Patagonia, Argentina)

    Science.gov (United States)

    Limarino, Carlos Oscar; Giordano, Sergio Roberto

    2016-03-01

    The aim of this paper is to study the provenance of Late Cretaceous sandstones deposited along the south flank of the Golfo San Jorge Basin. For this purpose, detrital modes of three hundred thirty-seven sandstone samples collected in the Mina del Carmen, Bajo Barreal, and Cañadón Seco Formations were studied in ten oil fields. According to the modal composition of the sandstones, six petrofacies were defined allowing the identification of not only principal, but also secondary provenance areas. The QVM and VQM petrofacies are more than 20% metamorphic, sedimentary, and polycrystalline quartz clasts (Lm + Ls + Qpg > 20%), evidencing a secondary signal of basement supply masked by a predominant volcanic provenance. The petrofacies VP and VF are characterized by Lm + Ls + Qpg 20%.), which indicate a supply of sediment from volcanic terrains and scarce derivation of materials from basement rocks. Based on the plagioclase/k-feldspar ratio, the VF petrofacies is interpreted to be dominated by the supply of sand grains from the Andean volcanic-arc, while VP is supposed have originated through the erosion of intermediate volcanic rock outcroppings in the Macizo del Deseado. Finally, both the VQ and QV petrofacies show Lm + Ls + Qpg <20% and Pm + Om<20%, indicating a provenance of volcanic areas coupled with minor contributions from basement rocks. During the Late Cretaceous, the Golfo San Jorge Basin underwent a sag phase that was characterized by very scarce volcanism and tectonic activity. Although these conditions did not favor defined patterns in the vertical stacking of petrofacies, the sandstones exhibit remarkable changes in their regional distribution, which were determined by the paleogeography of the basin and differences in basement composition within the source areas. Finally, a paleogeographic model for sediment circulation in the basin is proposed. This model recognizes the main fluvial dispersal trends that flowed northwest to southeast and transported

  20. Microstructure and pitting corrosion of armor grade AA7075 aluminum alloy friction stir weld nugget zone – Effect of post weld heat treatment and addition of boron carbide

    Directory of Open Access Journals (Sweden)

    P. Vijaya Kumar

    2015-06-01

    Full Text Available Friction stir welding (FSW of high strength aluminum alloys has been emerged as an alternative joining technique to avoid the problems during fusion welding. In recent times FSW is being used for armor grade AA7075 aluminum alloy in defense, aerospace and marine applications where it has to serve in non uniform loading and corrosive environments. Even though friction stir welds of AA7075 alloy possess better mechanical properties but suffer from poor corrosion resistance. The present work involves use of retrogression and reaging (RRA post weld heat treatment to improve the corrosion resistance of welded joints of aluminum alloys. An attempt also has been made to change the chemical composition of the weld nugget by adding B4C nano particles with the aid of the FSW on a specially prepared base metal plate in butt position. The effects of peak aged condition (T6, RRA and addition of B4C nano particles on microstructure, hardness and pitting corrosion of nugget zone of the friction stir welds of AA7075 alloy have been studied. Even though RRA improved the pitting corrosion resistance, its hardness was slightly lost. Significant improvement in pitting corrosion resistance was achieved with addition of boron carbide powder and post weld heat treatment of RRA.

  1. JURASSIC PALEONTOLOGICAL HERITAGE OF MURCIA (BETIC CORDILLERA, SOUTH-EASTERN SPAIN

    Directory of Open Access Journals (Sweden)

    GREGORIO ROMERO

    2004-03-01

    Full Text Available Jurassic rocks of the External and Internal Zones of the Betic Cordillera are widespread in the province of Murcia. Four areas are considered of special interest for stratigraphical and paleontological analysis: a Sierra Quípar and b Sierras Lúgar-Corque (External Subbetic, c Sierra Ricote (Median Subbetic and d Sierra Espuña (Malaguide Complex. The first two contain Jurassic sections including Sinemurian-Tithonian deposits, and major stratigraphic discontinuities, containing significant cephalopod concentrations of taphonomic and taxonomic interest, occuring in the Lower-Upper Pliensbachian, Lower/Middle Jurassic and Middle/Upper Jurassic boundaries. These areas are also relevant for biostratigraphical analysis of the Middle-Upper Jurassic interval. In the Sierra de Ricote, the Mahoma section is of especial interest for the study of Lías/Dogger transition. Casa Chimeneas section constitutes the best Subbetic site for the analysis of the Lower/Upper Bajocian boundary. In the La Bermeja-Casas de Vite area, the Bajocian-Tithonian interval is well-represented, including a parastratotype of the Radiolarite Jarropa Formation. Finally, the Malvariche section in Sierra Espuña represents the best Jurassic succession of Internal Zones of the Betic Cordillera and could be considered as a reference section for this Betic Domain. In this paper a heritage evaluation has been carried out for these classical jurassic sections with the object of protecting these sites according to the legal framework prevailing in the province of Murcia.

  2. On the water saturation calculation in hydrocarbon sandstone reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Stalheim, Stein Ottar

    2002-07-01

    The main goal of this work was to identify the most important uncertainty sources in water saturation calculation and examine the possibility for developing new S{sub w} - equations or possibility to develop methods to remove weaknesses and uncertainties in existing S{sub w} - equations. Due to the need for industrial applicability of the equations we aimed for results with the following properties: The accuracy in S{sub w} should increase compared with existing S{sub w} - equations. The equations should be simple to use in petrophysical evaluations. The equations should be based on conventional logs and use as few as possible input parameters. The equations should be numerical stable. This thesis includes an uncertainty and sensitivity analysis of the most common S{sub w} equations. The results are addressed in chapter 3 and were intended to find the most important uncertainty sources in water saturation calculation. To increase the knowledge of the relationship between R{sub t} and S{sub w} in hydrocarbon sandstone reservoirs and to understand how the pore geometry affects the conductivity (n and m) of the rock a theoretical study was done. It was also an aim to examine the possibility for developing new S{sub w} - equations (or investigation an effective medium model) valid inhydrocarbon sandstone reservoirs. The results are presented in paper 1. A new equation for water saturation calculation in clean sandstone oil reservoirs is addressed in paper 2. A recommendation for best practice of water saturation calculation in non water wet formation is addressed in paper 3. Finally a new equation for water saturation calculation in thinly interbedded sandstone/mudstone reservoirs is presented in paper 4. The papers are titled: 1) Is the saturation exponent n a constant. 2) A New Model for Calculating Water Saturation In 3) Influence of wettability on water saturation modeling. 4) Water Saturation Calculations in Thinly Interbedded Sandstone/mudstone Reservoirs. A

  3. Experimental deformation in sandstone, carbonates and quartz aggregate

    Energy Technology Data Exchange (ETDEWEB)

    Cheung, Cecilia See Nga [Stony Brook Univ., NY (United States)

    2015-05-01

    The first part of my thesis is mainly focused on the effect of grain size distribution on compaction localization in porous sandstone. To identify the microstructural parameters that influence compaction band formation, I conducted a systematic study of mechanical deformation, failure mode and microstructural evolution in Bleurswiller and Boise sandstones, of similar porosity (~25%) and mineralogy but different sorting. Discrete compaction bands were observed to develop over a wide range of pressure in the Bleurswiller sandstone that has a relatively uniform grain size distribution. In contrast, compaction localization was not observed in the poorly sorted Boise sandstone. My results demonstrate that grain size distribution exerts important influence on compaction band development, in agreement with recently published data from Valley of Fire and Buckskin Gulch, as well as numerical studies. The second part aimed to improve current knowledge on inelastic behavior, failure mode and brittle-ductile transition in another sedimentary rock, porous carbonates. A micritic Tavel (porosity of ~13%) and an allochemical Indiana (~18%) limestones were deformed under compaction in wet and dry conditions. At lower confining pressures, shear localization occurred in brittle faulting regime. Through transitional regime, the deformation switched to cataclastic flow regime at higher confining pressure. Specifically in the cataclastic regime, the (dry and wet) Tavel and dry Indiana failed by distributed cataclastic flow, while in contrast, wet Indiana failed as compaction localization. My results demonstrate that different failure modes and mechanical behaviors under different deformation regimes and water saturation are fundamental prior to any geophysical application in porous carbonates. The third part aimed to focus on investigating compaction on quartz aggregate starting at low (MPa) using X-ray diffraction. We report the diffraction peak evolution of quartz with increasing

  4. Interbasinal marker intervals——A case study from the Jurassic basins of Kachchh and Jaisalmer, western India

    Institute of Scientific and Technical Information of China (English)

    PANDEY; Dhirendra; Kumar; FüRSICH; Franz; Theodor

    2009-01-01

    The Kachchh Basin and the Jaisalmer Basin are two neighboring Mesozoic sedimentary basins at the western margin of the Indian craton. The Jurassic succession of the Kachchh Basin is more complete and more fossiliferous than that of the Jaisalmer Basin. Consequently, intrabasinal correlation of the sedimentary units has been possible in the Kachchh Basin, but not in the Jaisalmer Basin. However, some marker beds existing in the Kachchh Basin can be recognized also in the Jaisalmer Basin. Ammonite evidence shows that they are time-equivalent. The following four units form marker intervals in both basins: (1) the pebbly rudstone unit with Isastrea bernardiana and Leptosphinctes of the Kaladongar Formation (Kachchh Basin) and the Isastrea bernardiana-bearing rudstone of the Jaisalmer Formation (Jaisalmer Basin) both represent transgressive systems tract deposits dated as Late Bajocian; (2) bioturbated micrites with anomalodesmatan bivalves within the Goradongar Yellow Flagstone Member (Kachchh Basin) and bioturbated units in the Fort Member (Jaisalmer Basin) represent maximum flooding zone deposits of the Middle to Late Bathonian; (3) trough-crossbedded, sandy packto grainstones of the Raimalro Limestone Member (Kachchh Basin) and the basal limestone-sandstone unit of the Kuldhar section of the Jaisalmer Formation (Jaisalmer Basin) correspond to Late Bathonain transgressive systems tract deposits; and (4) ferruginous ooid-bearing carbonates with hardgrounds of the Dhosa Oolite member (Kachchh Basin) and the middle part of the Jajiya Member (Jaisalmer Basin) are Oxfordian transgressive systems tract deposits. The fact that in both basins similar biofacies prevailed during certain time intervals demonstrates a common control of their depositional history. As the two basins represent different tectonic settings, the most likely controlling factors were the relative sea-level changes produced by eustatic processes, a common subsidence history of the northwestern margin of

  5. The geographic and phylogenetic position of sauropod dinosaurs from the Kota formation (Early Jurassic) of India

    Science.gov (United States)

    Gillette, David D.

    2003-03-01

    The earliest sauropods are the Late Triassic Isanosaurus from Thailand, the Early Jurassic Barapasaurus and Kotasaurus from the Kota Formation of the Pranhita-Godavari Basin of India and Vulcanodon from Zimbabwe, and a variety of Middle Jurassic genera from many localities in Gondwana and Laurasia except North America. These early sauropod genera are related, but their phylogenetic positions remain unresolved. Sauropods originated in Laurasia (Thailand and vicinity) or Pangea (broadly, Thailand, China, India), with at least three additional steps involving expansion and diversification through the Middle Jurassic.

  6. POROSPHAERA (PORIFERA, A GLOBULAR SPONGE FROM THE UPPER JURASSIC OF THE CENTRAL IRAN

    Directory of Open Access Journals (Sweden)

    BABA SENOWBARI-DARYAN

    2011-11-01

    Full Text Available Porosphaera, an abundant small spherical calcisponge, well known from Cretaceous strata of Europe, was found in Middle and Upper Jurassic deposits of east-central Iran. This is the first record of Porosphaera from the Jurassic, except for a questionable occurrence of the genus from the Upper Jurassic of Canada, described by Jansa et al. (1982. The following species are new: P. regularis n. sp., P. biporata n. sp., P.? labyrinthica n. sp.,  and P.? asymmetrica n. sp. 

  7. Early Jurassic Flora and Stratigraphy from Shansonggang of Southern Jilin,China

    Institute of Scientific and Technical Information of China (English)

    Fengxiang Liu; Yuewu Sun; Chunlin Sun; Jiansheng Lu; Yanhua Zhao

    2003-01-01

    More than 35 species belonging to 22 genera of fossil plants are recognized by the authors from the Shansonggang flora in the 8hansonggang Basin of Jilin, China. Among them, the coexistence of Coniopteris and Cycadocarpidium demonstrates that the present flora possesses the characters of the early assemblage of Early Jurassic floras in Eurasia. Therefore, the age of the Shansonggang flora is considered the Early Jurassic.This study would be beneficial for better understanding the paleoecological and paleoclimatic characteristics of the Shansonggang Basin. Based mainly on the characters of the flora, the authors suggest that the Lower Jurassic coal-bearing strata, the Shansongang Formation, should namely be renewed.

  8. Molecular composition and ultrastructure of Jurassic paravian feathers.

    Science.gov (United States)

    Lindgren, Johan; Sjövall, Peter; Carney, Ryan M; Cincotta, Aude; Uvdal, Per; Hutcheson, Steven W; Gustafsson, Ola; Lefèvre, Ulysse; Escuillié, François; Heimdal, Jimmy; Engdahl, Anders; Gren, Johan A; Kear, Benjamin P; Wakamatsu, Kazumasa; Yans, Johan; Godefroit, Pascal

    2015-08-27

    Feathers are amongst the most complex epidermal structures known, and they have a well-documented evolutionary trajectory across non-avian dinosaurs and basal birds. Moreover, melanosome-like microbodies preserved in association with fossil plumage have been used to reconstruct original colour, behaviour and physiology. However, these putative ancient melanosomes might alternatively represent microorganismal residues, a conflicting interpretation compounded by a lack of unambiguous chemical data. We therefore used sensitive molecular imaging, supported by multiple independent analytical tests, to demonstrate that the filamentous epidermal appendages in a new specimen of the Jurassic paravian Anchiornis comprise remnant eumelanosomes and fibril-like microstructures, preserved as endogenous eumelanin and authigenic calcium phosphate. These results provide novel insights into the early evolution of feathers at the sub-cellular level, and unequivocally determine that melanosomes can be preserved in fossil feathers.

  9. Paleomagnetic studies on sedimentary Jurassic rocks from southern Bulgaria

    Science.gov (United States)

    Kruczyk, J.; Kaḑziałko-Hofmokl, M.; Nozharov, P.; Petkov, N.; Nachev, I.

    Paleomagnetic investigations were performed on Jurassic sediments sampled in the mobile area of Bulgaria comprising Srednogorie, Kreiste and Stranja. The main carriers of magnetic properties of rocks studied are pigmentary haematite and goethite of post-sedimentary origin. The characteristic component of natural remanence (CARM), isolated by means of analysis of demagnetization procedure is secondary, and was acquired after the main tectonic event that took place in this area during the Upper Cretaceous. The CARM directions before tectonic correction are close to the results for Upper Cretaceous magmatic rocks from Srednogorie. The mean CARM direction and the corresponding polar position obtained for the whole region studied are compared with reference data for the Eurasian Platform. The difference between the reference and our data implies anticlockwise rotation of southern Bulgaria relative to Eurasia by ˜ 10-20° and a northward tilt of the region under study by ˜ 10-15° after acquisition of CARM.

  10. Three new Jurassic euharamiyidan species reinforce early divergence of mammals.

    Science.gov (United States)

    Bi, Shundong; Wang, Yuanqing; Guan, Jian; Sheng, Xia; Meng, Jin

    2014-10-30

    The phylogeny of Allotheria, including Multituberculata and Haramiyida, remains unsolved and has generated contentious views on the origin and earliest evolution of mammals. Here we report three new species of a new clade, Euharamiyida, based on six well-preserved fossils from the Jurassic period of China. These fossils reveal many craniodental and postcranial features of euharamiyidans and clarify several ambiguous structures that are currently the topic of debate. Our phylogenetic analyses recognize Euharamiyida as the sister group of Multituberculata, and place Allotheria within the Mammalia. The phylogeny suggests that allotherian mammals evolved from a Late Triassic (approximately 208 million years ago) Haramiyavia-like ancestor and diversified into euharamiyidans and multituberculates with a cosmopolitan distribution, implying homologous acquisition of many craniodental and postcranial features in the two groups. Our findings also favour a Late Triassic origin of mammals in Laurasia and two independent detachment events of the middle ear bones during mammalian evolution.

  11. An Undercover Angiosperm from the Jurassic of China

    Institute of Scientific and Technical Information of China (English)

    ZHENG Shaolin; WANG Xin

    2010-01-01

    Searching for early angiosperms is a riveting activity in botany because it helps to resolve the phylogenetic relationships among seed plants and among angiosperms themselves.One of the challenges for this job is what the target fossils look like.Most possibly early angiosperms may elude our scrutiny with gymnospermous appearances.This possibility becomes a reality in a Jurassic plant,Solaranthus gen.nov,which bears a peltaspermalean appearance and enclosed ovules.According to knowledge available hitherto,the latter feature makes it an angiosperm.However,such a feature is more likely to be eclipsed by its gymnospermous appearance.The early age and unexpected character assemblage of Solaranthus urge for a fresh look on the assumed-simple relationship between angiosperms and gymnosperms.Its resemblance to the order Peltaspermales favors the Mostly Male Theory.

  12. Geomagnetic field intensity in the middle jurassic - oligocene

    CERN Document Server

    Kurazhkovskii, A Yu; Klain, B I

    2014-01-01

    The present paper summarizes results of the studies on the intensity of geomagnetic field in the (167 - 23) Ma interval by sedimentary rocks of the Russian Plate and adjacent territories. The joint analysis of the data paleointensity obtained by sedimentary and thermomagnetized (from PINT12) rocks within this temporal interval is conducted. It is shown that the changes of the paleointensity were occurred chaotically. Alternating bursts and periods of quiet regime of the geomagnetic field are typical for intermittent processes and is a characteristic of the geological interval Jurassic-beginning of Paleogene. The distributions of the paleointensity corresponding to different intervals of geologic time were investigated. It is revealed that the cumulative distribution function (CDF) of the paleointensity values is best approximated by a power function. The indices of the power functions varied depending on geologic time intervals.The analysis of the paleomagnetic data suggests that the medium in which the geoma...

  13. Extreme adaptations for aquatic ectoparasitism in a Jurassic fly larva.

    Science.gov (United States)

    Chen, Jun; Wang, Bo; Engel, Michael S; Wappler, Torsten; Jarzembowski, Edmund A; Zhang, Haichun; Wang, Xiaoli; Zheng, Xiaoting; Rust, Jes

    2014-06-24

    The reconstruction of ancient insect ectoparasitism is challenging, mostly because of the extreme scarcity of fossils with obvious ectoparasitic features such as sucking-piercing mouthparts and specialized attachment organs. Here we describe a bizarre fly larva (Diptera), Qiyia jurassica gen. et sp. nov., from the Jurassic of China, that represents a stem group of the tabanomorph family Athericidae. Q. jurassica exhibits adaptations to an aquatic habitat. More importantly, it preserves an unusual combination of features including a thoracic sucker with six radial ridges, unique in insects, piercing-sucking mouthparts for fluid feeding, and crocheted ventral prolegs with upward directed bristles for anchoring and movement while submerged. We demonstrate that Q. jurassica was an aquatic ectoparasitic insect, probably feeding on the blood of salamanders. The finding reveals an extreme morphological specialization of fly larvae, and broadens our understanding of the diversity of ectoparasitism in Mesozoic insects.DOI: http://dx.doi.org/10.7554/eLife.02844.001.

  14. Triassic-Jurassic Mass Extinction: Evidence for Bolide Impact?

    Science.gov (United States)

    Perry, R.; Becker, L.; Haggart, J.; Poreda, R.

    2003-04-01

    The Triassic-Jurassic (TJ) mass extinction event is one of the most severe in geologic history and is one of the five largest in the Phanerozoic with as many as 80% of the species lost. It is also one of the most poorly understood. Only a few geologic sections have been identified for the TJ extinction and most of those are not well preserved. Previously, the paucity of suitable stratigraphic sections has prevented corroborative geochemical studies. Recently a well-preserved stratigraphic section spanning the Triassic-Jurassic boundary (˜200 mya) was identified at Kennecott Point, Queen Charlotte, Islands, British Columbia. Initial studies have shown that the Kennecott Point sequence is one of the best preserved and contains one of the most complete radiolarian microfossil turnovers known. Analyses of stable isotopes have shown that a 13C perturbation exits within the sequence and suggests a decline in organic productivity (Ward et al., 2001). Preliminary results of laser desorption mass spectrometry (LDMS) of selected Queen Charlotte samples suggest that fullerenes (C60 to C200) may be present in the Kennecott Point stratigraphic sequence. Previous studies have shown that fullerenes are present in the mass extinction boundary of the Permian-Triassic (˜251 mya) as well as the well-known "dinosaur" extinction event of the Cretaceous-Tertiary (˜65 mya). Therefore, three of the big five extinction events appear to have associated fullerenes. The possible presence of fullerenes along with the productivity collapse (rapid environmental change) suggests that a cometary or asteroidal impact may have occurred. Although no known impact crater exists, we hope to present chemical evidence that an impact or multiple impacts may have been responsible for the TJ mass extinction.

  15. Porphyrin geochemistry of Atlantic Jurassic-Cretaceous black shales

    Energy Technology Data Exchange (ETDEWEB)

    Baker, E.W.; Louda, J.W.

    1986-01-01

    Late Jurassic-early Cretaceous black shales and an overlying sequence of Albian-Campanian zeolitic claystones from the Falkland Plateau (DSDP/IPOD Leg 71, Site 511) were analyzed for tetrapyrrole pigment type and abundance. The black shale sequence was found to be rich in DPEP-series dominated free-base, nickel (Ni) and, to a lesser extent, vanadyl (V = 0) porphyrins. A low level of organic maturity (i.e. precatagenesis) is indicated for these strata as nickel chelation by free-base porphyrins is only 50-75% complete, proceeding down-hole to 627 meters sub-bottom. Electronic and mass spectral data reveal that the proposed benzo-DPEP (BD) and tetrahydrobenzo-DPEP (THBD) series are present in the free-base and Ni species, as well as the more usual occurrence in V = 0 porphyrin arrays. Highly reducing conditions are suggested by an abundance of the PAH perylene, substantial amounts of the THBD/BD series and a redox equilibrium between free-base DPEP and 7,8-dihydro-DPEP series, which exist in a 7:1 molar ratio. The Albian-Campanian claystone strata were found to be tetrapyrrole poor, and those pigments present were typed as Cu/Ni highly dealkylated (C/sub 26/ max.) etioporphyrins, thought to be derived via redeposition and oxidation of terrestrial organic matter (OM). Results from the present study are correlated to their past analyses of Jurassic-Cretaceous sediments from Atlantic margins in an effort to relate tetrapyrrole quality and quantity to basin evolution and OM sources in the proto-Atlantic.

  16. Remagnetization and Clay diagenesis in Jurassic Sediments of Skye, Scotland

    Science.gov (United States)

    Basu, A.; Elliott, W.; Wampler, J.; Elmore, R.; Engel, M. H.

    2003-12-01

    The thrust of this study is to test the hypothesized connection between magnetite authigenesis and diagenetic reactions forming illite, an idea based on the results of paleomagnetic, rock magnetic, geochemical, and petrographic/SEM studies on Jurassic sedimentary rocks of Skye, Scotland. The Jurassic rocks in southern Skye contain a dual polarity magnetization residing in magnetite that is interpreted as a chemical remanent magnetization (CRM) and has directions similar to those of early Tertiary igneous rocks on Skye. The presence-absence test and the timing of acquisition for this CRM suggest that magnetite authigenesis is related to the smectite-to-illite conversion, and that clay diagenesis is a viable remagnetization mechanism. The clay fractions consist of illite-smectite (I-S), kaolinite, and trace amounts of chlorite. The I-S exhibits Kalkberg order (IISI) and typically contains ˜ 85% to 90% illite layers based on the positions of the 001 reflection. The 2M1, 1M and 1Md illite polytypes are present in variable proportions depending on size fraction. The K-Ar dates of I-S in the finest fraction range from 100 to 131 Ma while the K-Ar dates of I-S of the coarse fractions range from 160-210 Ma. In all cases, the dates of the finest I-S are much greater than the Tertiary CRM ages recorded in these rocks (65 Ma). The K-Ar dates decrease with decrease in particle size. At first approximation, the decrease is thought to reflect smaller amounts of detrital illite in the finer fractions. The youngest K-Ar dates of I-S are significantly greater than the CRM age recorded in these sediments. The most likely explanation of the discordance between K-Ar dates and CRM is that the finest fractions contain small amounts of detrital illite.

  17. Structure and climate controls on the evolution of a Mid-Late Jurassic alluvial fan-delta system in the western part of Yanshan fold-and-thrust belt

    Science.gov (United States)

    Lin, Chengfa; Liu, Shaofeng; Yao, Xiang; Ma, Pengfei

    2016-04-01

    The Yanshan fold-thrust belt experienced several significant tectonic events during Mesozoic time and developed thrust fault-bounded intramontane sedimentary basins. However, elaborate works of sedimentology is inadequate in the Yanshan belt, particularly in its western segment, leading to a failure in comprehensively understanding how bounding-faults and climate change influence the basin filling processes. Our detailed sedimentological study of the Middle Jurassic Xiahuayuan Formation and Upper Jurassic-Lower Cretaceous Jiulongshan Formation in the Xiahuayuan basin of northern Hebei province, indicates a genetic relationship between the evolution of an alluvial fan-delta system and the tectonic and climate setting. The Xiahuayuan Formation was assigned to a debris flow-dominated Gilbert-type fan-delta composed of topset conglomerates, foreset massive siltstone-fine grained sandstone interbedded with lenticular conglomerate units and bottomset/lake bottom fine-grained deposits, spatially restricted to the northern part of the basin. While the lower Jiulongshan Formation was considered as a relatively small debris flow- and turbidity currents-dominated fan-delta with a single-ramp portrait, prograding into the middle part of the basin. And the upper part of Jiulongshan Formation contributed to the lake bottom component of the delta system during the forming of the Jiulongshan Formation. Our results reveal a transformation of a fan-delta from Gilbert-type to single-ramp type and the basinward migration of this fan-delta during Mid-Late Jurassic in the Xiahuayuan basin. And it is assumed that the activity of a thrust fault along the northern basin margin and the rapid switch of climate conditions from warm and humid to hot and dry triggered the transformation and migration of this fan-delta system.

  18. Presolar Refractory Metal Nuggets

    Science.gov (United States)

    Croat, T. K.; Berg, T.; Bernatowicz, T. J.; Jadhav, M.

    2012-03-01

    Presolar RMN microstructures show they are primary high T circumstellar condensates, which are then encapsulated in graphite at 1580-1815 K. Similarities between presolar RMNs and isolated RMNs suggest the latter are among the first primary solar system condensates.

  19. Single Nugget Kriging

    OpenAIRE

    Lee, Minyong R.; Owen, Art B.

    2015-01-01

    We propose a method with better predictions at extreme values than the standard method of Kriging. We construct our predictor in two ways: by penalizing the mean squared error through conditional bias and by penalizing the conditional likelihood at the target function value. Our prediction exhibits robustness to the model mismatch in the covariance parameters, a desirable feature for computer simulations with a restricted number of data points. Applications on several functions show that our ...

  20. The Jurassic of Denmark and Greenland: The Middle Jurassic of western and northern Europe: its subdivisions, geochronology and correlations

    Directory of Open Access Journals (Sweden)

    Callomon, John H.

    2003-10-01

    Full Text Available The palaeogeographic settings of Denmark and East Greenland during the Middle Jurassic are outlined. They lay in the widespread epicontinental seas that covered much of Europe in the post-Triassic transgression. It was a period of continuing eustatic sea-level rise, with only distant connections to world oceans: to the Pacific, via the narrow Viking Straits between Greenland and Norway and hence the arctic Boreal Sea to the north; and to the subtropical Tethys, via some 1200 km of shelf-seas to the south. The sedimentary history of the region was strongly influenced by two factors: tectonism and climate. Two modes of tectonic movement governed basinal evolution: crustal extension leading to subsidence through rifting, such as in the Viking and Central Grabens of the North Sea; and subcrustal thermal upwelling, leading to domal uplift and the partition of marine basins through emergent physical barriers, as exemplified by the Central North Sea Dome with its associated volcanics. The climatic gradient across the 30º of temperate latitude spanned by the European seas governed biotic diversity and biogeography, finding expression in rock-forming biogenic carbonates that dominate sediments in the south and give way to largely siliciclastic sediments in the north. Geochronology of unrivalled finesse is provided by standard chronostratigraphy based on the biostratigraphy of ammonites. The Middle Jurassic saw the onset of considerable bioprovincial endemisms in these guide-fossils, making it necessary to construct parallel standard zonations for Boreal, Subboreal or NW European and Submediterranean Provinces, of which the NW European zonation provides the primary international standard. The current versions of these zonations are presented and reviewed.

  1. Imaging the Morrow A Sandstone Using Shear Wave VSP Data, Postle Field, Oklahoma

    Directory of Open Access Journals (Sweden)

    Naser Tamimi

    2012-01-01

    potential to enhance shear wave imaging of the thin heterogeneous Morrow A sandstone at Postle Field. The zero-offset VSP results confirm the advantages of shear wave over compressional wave in imaging the Morrow A sandstone. Also, the final shear wave VSP image shows that, applying the proposed processing flow, we are able to image the Morrow A sandstone where the thickness is as thin as 8.5 m.

  2. Petrology and stratigraphy of Paleogene nonmarine sandstones, Cascade Range, Washington

    Science.gov (United States)

    Frizzell, Virgil A.

    1979-01-01

    The Cascade Range of Washington north of 47? latitude is composed of probable Paleozoic and Mesozoic metamorphic rocks and Mesozoic and Tertiary plutonic rocks. Several Paleogene nonmarine arkosic sandstone units fringe and in part occur within the complex crystalline core. The early to middle Eocene Chuckanut Formation is present on the west side of the crystalline core in the western foothills of the Cascades. The early to middle Eocene Swauk Formation partially encircles the Mt. Stuart massif of the central Cascades. In the western foothills of the Cascades, between the main body of Chuckanut Formation near Bellingham and the main outcrop area of the Swauk Formation south of Mt. Stuart, many smaller bodies of arkosic sandstone have variously been referred to either the Swauk or Chuckanut Formations. The early Eocene Manastash Formation occurs locally in an area south of the Yakima River. The middle to late Eocene Chumstick Formation is mostly confined to the Chiwaukum graben within the crystalline core and is separated from the Swauk Formation on the southwest by the Leavenworth Fault. The Oligocene Wenatchee Formation unconformably over lies the Chumstick Formation near Wenatchee. The middle to late Eocene Roslyn Formation crops out north of the Yakima River and is underlain by the Teanaway Basalt which separates the Roslyn from the older Swauk Formation. The middle Eocene to early Oligocene Naches Formation forms a north-trending body that crosses the Yakima River and is in fault contact with both the Swauk and Manastash Formations. The middle to late Eocene Puget Group underlies the Quaternary deposits of the Puget Lowland southeast of Seattle on the western flank of the Cascades. The various formations are all composed predominantly of fine- to medium-grained sandstones with lesser amounts of interbedded shale, conglomerate and coal. Compositionally, the units are predominantly either feldspathic or litho-feldspathic subquartzose sandstones. Volcanic rocks

  3. Occurrence of sauropod dinosaur tracks in the Upper Jurassic of Chile (redescription of Iguanodonichnus frenki)

    Science.gov (United States)

    Moreno, Karen; Benton, Michael J.

    2005-12-01

    New observations from the only studied Upper Jurassic dinosaur unit in South America, the Baños del Flaco Formation, Chile, are presented herein. The original description of the ichnospecies Iguanodonichnus frenki contains several mistakes and information that needs updating. Therefore, we provide a redescription, including new data collected in the field, that supports I. frenki as a sauropod in origin on the basis of the following features: step angles average less than 110°; pes prints intersect the trackway midline; pes prints are longer than wide, with the long axis rotated outward; the claw impression of digit I is prominent and directed forward; and claws on digits II, III, and IV are strongly reduced. These morphological characteristics might give clues about the pes morphology of the South American Jurassic sauropods, whose foot bone remains are scarce. The presence of this sauropod ichnospecies in the Late Jurassic agrees with Early-Middle Jurassic faunal associations in South America.

  4. Fe-Ni Micrometorites from Upper Jurassic Cañadon Asfalto Fm., Patagonia, Argentina

    Science.gov (United States)

    Matteini, M.; Hauser, N.; Cabaleri, N.; Silva Nieto, D.; Cuadros, F. A.; Reyes, S.

    2014-09-01

    Microspherules from an upper Jurassic sediments from Patagonia, show mineralogical, geochemical and textural features very similar to those reported for I-type micrometeorites whereas some spherules are interpreted as typical G-type micrometeorites.

  5. Hettangian (early jurassic) plant fossils from Puale Bay (peninsular terrane, Alaska)

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Middle Hettangian (Early Jurassic) plant macrofossils from the Kamishak Formation at Puale Bay,Alaska occur mainly as leaves and leafy shoots found together with...

  6. Appalachian Basin Low-Permeability Sandstone Reservoir Characterizations

    Energy Technology Data Exchange (ETDEWEB)

    Ray Boswell; Susan Pool; Skip Pratt; David Matchen

    1993-04-30

    A preliminary assessment of Appalachian basin natural gas reservoirs designated as 'tight sands' by the Federal Energy Regulatory Commission (FERC) suggests that greater than 90% of the 'tight sand' resource occurs within two groups of genetically-related units; (1) the Lower Silurian Medina interval, and (2) the Upper Devonian-Lower Mississippian Acadian clastic wedge. These intervals were targeted for detailed study with the goal of producing geologic reservoir characterization data sets compatible with the Tight Gas Analysis System (TGAS: ICF Resources, Inc.) reservoir simulator. The first phase of the study, completed in September, 1991, addressed the Medina reservoirs. The second phase, concerned with the Acadian clastic wedge, was completed in October, 1992. This report is a combined and updated version of the reports submitted in association with those efforts. The Medina interval consists of numerous interfingering fluvial/deltaic sandstones that produce oil and natural gas along an arcuate belt that stretches from eastern Kentucky to western New York. Geophysical well logs from 433 wells were examined in order to determine the geologic characteristics of six separate reservoir-bearing intervals. The Acadian clastic wedge is a thick, highly-lenticular package of interfingering fluvial-deltaic sandstones, siltstones, and shales. Geologic analyses of more than 800 wells resulted in a geologic/engineering characterization of seven separate stratigraphic intervals. For both study areas, well log and other data were analyzed to determine regional reservoir distribution, reservoir thickness, lithology, porosity, water saturation, pressure and temperature. These data were mapped, evaluated, and compiled into various TGAS data sets that reflect estimates of original gas-in-place, remaining reserves, and 'tight' reserves. The maps and data produced represent the first basin-wide geologic characterization for either interval. This report

  7. Time-dependent compaction band formation in sandstone

    Science.gov (United States)

    Heap, Michael J.; Brantut, Nicolas; Baud, Patrick; Meredith, Philip G.

    2015-07-01

    Compaction bands in sandstone are laterally extensive planar deformation features that are characterized by lower porosity and permeability than the surrounding host rock. As a result, this form of localization has important implications for both strain partitioning and fluid flow in the Earth's upper crust. To better understand the time dependency of compaction band growth, we performed triaxial deformation experiments on water-saturated Bleurswiller sandstone (initial porosity = 0.24) under constant stress (creep) conditions in the compactant regime. Our experiments show that inelastic strain accumulates at a constant stress in the compactant regime, manifest as compaction bands. While creep in the dilatant regime is characterized by an increase in porosity and, ultimately, an acceleration in axial strain rate to shear failure, compaction creep is characterized by a reduction in porosity and a gradual deceleration in axial strain rate. The global decrease in the rates of axial strain, acoustic emission energy, and porosity change during creep compaction is punctuated at intervals by higher rate excursions, interpreted as the formation of compaction bands. The growth rate of compaction bands formed during creep is lower as the applied differential stress, and hence, background creep strain rate, is decreased. However, the inelastic strain associated with the growth of a compaction band remains constant over strain rates spanning several orders of magnitude (from 10-8 to 10-5 s-1). We find that despite the large differences in strain rate and growth rate (from both creep and constant strain rate experiments), the characteristics (geometry and thickness) of the compaction bands remain essentially the same. Several lines of evidence, notably the similarity between the differential stress dependence of creep strain rate in the dilatant and compactant regimes, suggest that as for dilatant creep, subcritical stress corrosion cracking is the mechanism responsible for

  8. Diagenesis of shallowly buried cratonic sandstones, southwest Sinai, Egypt

    Science.gov (United States)

    Salem, Alaa M. K.; Abdel-Wahab, Antar; McBride, Earle F.

    1998-08-01

    In spite of their age, quartzose and feldspathic Lower Carboniferous sandstones deposited on the Arabian shield in western Sinai remain friable and porous (average of 19%, maximum of 25%) except for strongly cemented ferricretes and silcretes. These fluvial and shallow-marine sandstones were not buried more than 1.5 km until Late Cretaceous and younger time, when the deepest rocks reached 2.5 km. Owing to shallow burial depths and episodic exposure, meteoric water dominated the pore system for most of geologic time: iron oxides had multiple diagenetic stages and yield Carboniferous and Late Cretaceous paleomagnetic signatures, and oxygen isotopic data for authigenic quartz, sparry calcite, and kaolinite yield meteoric signatures. The most significant diagenetic changes were: (1) cementation by iron oxide that locally reaches 40% in groundwater ferricretes; (2) reduction in porosity to 19% from an assumed original porosity 45% (19% porosity was lost by compaction and 7% by cementation); (3) generation of diagenetic quartzarenites by the loss of 7% detrital feldspar by kaolinization and dissolution; and (4) development of three thin mature silcretes apparently by thermal groundwaters. Some outcrop samples have halite and gypsum cements of young but uncertain origin: recycled from topographically higher younger rocks or from aerosols? Mature silcretes are strongly cemented by microcrystalline quartz, multiply zoned syntaxial quartz, and, originally, minor opal. Quartz overgrowths in most sandstones average only 2.2%, but display a variety of textures and in places overprint isopachous opal (now dissolved) grain coats. These features have more in common with incipient silcrete cement than normal burial quartz cement. Most silica was imported in groundwater.

  9. Population genetic structure of a sandstone specialist and a generalist heath species at two levels of sandstone patchiness across the Strait of Gibraltar.

    Science.gov (United States)

    Gil-López, Manuel Jesús; Segarra-Moragues, José Gabriel; Ojeda, Fernando

    2014-01-01

    Many habitat specialist species are originally composed of small, discontinuous populations because their habitats are naturally fragmented or patchy. They may have suffered the long-term effects of natural patchiness. Mediterranean heathlands, a representative habitat in the Strait of Gibraltar region, are associated with nutrient-poor, acidic sandstone soils. Sandstone soil patches in the African side of the Strait (Tangier) are, in general, smaller and more scattered than in the European side (Algeciras). In this study, we analyze the effect of this sandstone patchiness on the population genetic diversity and structure of two Erica species from these Mediterranean heathlands that differ in their edaphic specificity, E. australis, sandstone specialist, and E. arborea, generalist. Average levels of within-population genetic diversity and gene flow between populations were significantly lower in Tangier (high sandstone patchiness) than in Algeciras (low patchiness) for the sandstone specialist, whereas no differences between both sides of the Strait were detected in the edaphic generalist. Since most endemic species in Mediterranean heathlands of the Strait of Gibraltar are sandstone specialists, these results highlight an increased vulnerability to loss of genetic diversity and local extinction of the heathland endemic flora in the Tangier side of the Strait of Gibraltar.

  10. Population genetic structure of a sandstone specialist and a generalist heath species at two levels of sandstone patchiness across the Strait of Gibraltar.

    Directory of Open Access Journals (Sweden)

    Manuel Jesús Gil-López

    Full Text Available Many habitat specialist species are originally composed of small, discontinuous populations because their habitats are naturally fragmented or patchy. They may have suffered the long-term effects of natural patchiness. Mediterranean heathlands, a representative habitat in the Strait of Gibraltar region, are associated with nutrient-poor, acidic sandstone soils. Sandstone soil patches in the African side of the Strait (Tangier are, in general, smaller and more scattered than in the European side (Algeciras. In this study, we analyze the effect of this sandstone patchiness on the population genetic diversity and structure of two Erica species from these Mediterranean heathlands that differ in their edaphic specificity, E. australis, sandstone specialist, and E. arborea, generalist. Average levels of within-population genetic diversity and gene flow between populations were significantly lower in Tangier (high sandstone patchiness than in Algeciras (low patchiness for the sandstone specialist, whereas no differences between both sides of the Strait were detected in the edaphic generalist. Since most endemic species in Mediterranean heathlands of the Strait of Gibraltar are sandstone specialists, these results highlight an increased vulnerability to loss of genetic diversity and local extinction of the heathland endemic flora in the Tangier side of the Strait of Gibraltar.

  11. Subsurface petroleum geology of Santa Rosa sandstone (Triassic), northeast New Mexico

    Science.gov (United States)

    Broadhead, R. F.

    The Santa Rose Sandstone (Triassic) occurs at depths of less than 2,000 ft over most of northeast New Mexico. Two major petroleum accumulations are known to exist in it. These outcrops of oil impregnated sandstone are known as the Santa Rosa tar sands. The oil in the tar sands is viscous and heavy. The other known petroleum accumulation is a pool of heavy oil that occurs at depths of 400 ft to 800 ft in northeast Guadalupe County. Attempts are being made to recover the heavy oil with steamflooding in two small pilot fields. The lower and upper sandstone units are blanket deposits composed mostly of fine to medium grained porous sandstones and minor red siliciclastic mudstones. The middle mudstone unit is a blanket deposit composed chiefly of red siliciclastic mudstones and minor lenticular sandstones. Stratigraphic and petrographic studies indicate that good reservoirs are widespread in the lower and upper sandstone unit. The blanket geometry of the lower and upper sandstone units indicates that structure probably plays an important or even dominant role in the trapping of any undiscovered hydrocarbons in the Santa Rosa. Oil proximal to the outcrop belt of the Santa Rosa Sandstone has probably been flushed by recently recharged fresh ground water. Although the source of the oil in Santa Rosa Sandstone is not definitely known, geochemical studies point to the San Andres Formation (Permian) or possibly Pennsylanian rocks.

  12. Greybull Sandstone Petroleum Potential on the Crow Indian Reservation, South-Central Montana

    Energy Technology Data Exchange (ETDEWEB)

    Lopez, David A.

    2002-05-13

    The focus of this project was to explore for stratigraphic traps that may be present in valley-fill sandstone at the top of the Lower Cretaceous Kootenai Formation. This sandstone interval, generally known as the Greybull Sandstone, has been identified along the western edge of the reservation and is a known oil and gas reservoir in the surrounding region. The Greybull Sandstone was chosen as the focus of this research because it is an excellent, well-documented, productive reservoir in adjacent areas, such as Elk Basin; Mosser Dome field, a few miles northwest of the reservation; and several other oil and gas fields in the northern portion of the Bighorn Basin.

  13. Water Vapor Diffusion and Adsorption of Sandstones: Influence of Rock Texture and Composition

    Directory of Open Access Journals (Sweden)

    Martin Keppert

    2016-01-01

    Full Text Available The term sandstone is used for wide range of rocks containing quartz clasts which can be cemented by secondary precipitated quartz or calcite; moreover the space between clasts can be filled by matrix. These facts result in existence of numerous rocks having highly various properties. Sandstones have been used as construction materials due to their good accessibility and workability. Since most of sandstones are porous, water vapor can penetrate through sandstone constructions. The rate of water vapor diffusion, as well as the vapor sorption isotherm, was determined for range of sandstone types. The diffusion resistance factor was found to be dependent on the total porosity of sandstone but the sorption behavior was strongly influenced by nature of the particular sandstone; the specific surface area of stone and presence of clay matrix are determining its sorption isotherm. The published data enable estimating (i diffusion resistance factor of a sandstone via knowledge of its total porosity and (ii the sorption isotherm via knowledge of the stone’s nature and specific surface area. This approach can significantly reduce the time necessary to acquire vapor-related properties of a sandstone.

  14. Mechanical properties and failure characteristics of fractured sandstone with grouting and anchorage

    Institute of Scientific and Technical Information of China (English)

    Zong Yijiang; Han Lijun; Qu Tao; Yang Shengqi

    2014-01-01

    Based on uniaxial compression experimental results on fractured sandstone with grouting and anchorage, we studied the strength and deformation properties, the failure model, crack formation and evolution laws of fractured sandstone under different conditions of anchorage. The experimental results show that the strength and elastic modulus of fractured sandstone with different fracture angles are sig-nificantly lower than those of intact sandstone. Compared with the fractured samples without anchorage, the peak strength, residual strength, peak and ultimate axial strain of fractured sandstone under different anchorage increase by 64.5-320.0%, 62.8-493.0%, and 31.6-181.4%, respectively. The number of bolts and degree of pre-stress has certain effects on the peak strength and failure model of fractured sandstone. The peak strength of fractured sandstone under different anchorage increases to some extent, and the failure model of fractured sandstone also transforms from tensile failure to tensile-shear mixed failure with the number of bolts. The pre-stress can restrain the formation and evolution process of tensile cracks, delay the failure process of fractured sandstone under anchorage and impel the transformation of failure model from brittle failure to plastic failure.

  15. Magnetic Titanohematite Minerals in Uranium-Bearing Sandstones

    Science.gov (United States)

    Reynolds, Richard L.

    1977-01-01

    Detrital grains of the rhombohedral ilmenite (FeT1O3)--hematite (Fe2O3) solid solution series (titanohematites) have been identified by thermomagnetic, reflection microscopic, and X-ray diffraction analysis in six uranium-bearing sandstones in the western United States. Many of the titanohematites are ferrimagnetic and have Curie temperatures ranging from about 70 Deg C to 220 Deg C. Magnetic titanohematite is commonly more abundant than magnetite in many samples and, therefore, should be considered as a major source of the permanent magnetization in these units.

  16. Diagenesis, provenance and depositional environments of the Bunter Sandstone Formation

    DEFF Research Database (Denmark)

    Olivarius, Mette; Weibel, Rikke; Friis, Henrik

    The Bunter Sandstone Formation in the northern North German Basin has large geothermal potential with high porosity and permeability (generally >15% and >100 mD, respectively) and with pore fluid temperatures that are adequate for geothermal energy production (c. 55–60˚C). A combined investigation...... of diagenesis, provenance and depositional environments is used to identify the reservoir rocks that possess the best quality. This is accomplished by integrating various methods including: seismic reflection data, sedimentological description of cores, mineral quantification by point counting, measurement...

  17. Reservoir characterization of Pennsylvanian sandstone reservoirs. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Kelkar, M.

    1995-02-01

    This final report summarizes the progress during the three years of a project on Reservoir Characterization of Pennsylvanian Sandstone Reservoirs. The report is divided into three sections: (i) reservoir description; (ii) scale-up procedures; (iii) outcrop investigation. The first section describes the methods by which a reservoir can be described in three dimensions. The next step in reservoir description is to scale up reservoir properties for flow simulation. The second section addresses the issue of scale-up of reservoir properties once the spatial descriptions of properties are created. The last section describes the investigation of an outcrop.

  18. Initiation of acoustic emission in fluid-saturated sandstone samples

    Science.gov (United States)

    Lapshin, V. B.; Patonin, A. V.; Ponomarev, A. V.; Potanina, M. G.; Smirnov, V. B.; Stroganova, S. M.

    2016-07-01

    A rock behavior experiment with uniaxial compression revealed the effect of acoustic activity in loaded fluid-saturated Berea sandstone samples in response to an electric current. It is established that it is substantially intensified in periods of the current impact and decreases after its cut-off. The current impact also results in a growth of radial deformation indicating an increase in the sample volume. The effect of acoustic activation increases in response to increased heat emitted by the electric current during its flow through the sample, which allows the discovered effect to be explained by initiation of its destruction due to thermal expansion of the fluid in rock interstices and fissures.

  19. Two new species of Paramesosciophilodes (Diptera, Nematocera, Mesosciophilidae from the Middle Jurassic of China

    Directory of Open Access Journals (Sweden)

    Jiaqi Gao

    2015-07-01

    Full Text Available Two new species, Paramesosciophilodes bellus sp. n. and Paramesosciophilodes rarissima sp. n., from the Jiulongshan Formation at Daohugou Village, Inner Mongolia, China, are described in the extinct family Mesosciophilidae. Altogether seven genera with 21 species of mesosciophilids have been described from the Jurassic of Siberia and Kazakhstan, the Lower Cretaceous of Transbaikalia, and the Middle Jurassic of Inner Mongolia. An emended generic diagnosis of Paramesosciophilodes and a list of known taxa of mesosciophilids are provided.

  20. Two new species of Paramesosciophilodes (Diptera, Nematocera, Mesosciophilidae) from the Middle Jurassic of China.

    Science.gov (United States)

    Gao, Jiaqi; Shi, Guifeng; Shih, Chungkun; Ren, Dong

    2015-01-01

    Two new species, Paramesosciophilodesbellus sp. n. and Paramesosciophilodesrarissima sp. n., from the Jiulongshan Formation at Daohugou Village, Inner Mongolia, China, are described in the extinct family Mesosciophilidae. Altogether seven genera with 21 species of mesosciophilids have been described from the Jurassic of Siberia and Kazakhstan, the Lower Cretaceous of Transbaikalia, and the Middle Jurassic of Inner Mongolia. An emended generic diagnosis of Paramesosciophilodes and a list of known taxa of mesosciophilids are provided.

  1. The first euthemistid damsel-dragonfly from the Middle Jurassic of China (Odonata, Epiproctophora, Isophlebioptera

    Directory of Open Access Journals (Sweden)

    Yongjun Li

    2013-01-01

    Full Text Available Sinoeuthemis daohugouensis gen. et sp. n. is the first record of the isophlebiopteran family Euthemistidae from Middle Jurassic of northeast China, while previously this family was restricted to the early Late Jurassic Kazakhstan. This new finding allows us to emend the family diagnosis with hindwing characters. This new species shows a mixture of characters alternatively present in different genera of the two families Euthemistidae and Sphenophlebiidae.

  2. Post-Jurassic tectonic evolution of Southeast Asia

    Science.gov (United States)

    Zahirovic, Sabin; Seton, Maria; Dietmar Müller, R.; Flament, Nicolas

    2014-05-01

    The accretionary growth of Asia, linked to long-term convergence between Eurasia, Gondwana-derived blocks and the Pacific, resulted in a mosaic of terranes for which conflicting tectonic interpretations exist. Here, we propose solutions to a number of controversies related to the evolution of Sundaland through a synthesis of published geological data and plate reconstructions that reconcile both geological and geophysical constraints with plate driving forces. We propose that West Sulawesi, East Java and easternmost Borneo rifted from northern Gondwana in the latest Jurassic, collided with an intra-oceanic arc at ~115 Ma and subsequently sutured to Sundaland by 80 Ma. Although recent models argue that the Southwest Borneo core accreted to Sundaland at this time, we use volcanic and biogeographic constraints to show that the core of Borneo was on the Asian margin since at least the mid Jurassic. This northward transfer of Gondwana-derived continental fragments required a convergent plate boundary in the easternmost Tethys that we propose gave rise to the Philippine Archipelago based on the formation of latest Jurassic-Early Cretaceous supra-subduction zone ophiolites on Halmahera, Obi Island and Luzon. The Late Cretaceous marks the shift from Andean-style subduction to back-arc opening on the east Asian margin. Arc volcanism along South China ceased by ~60 Ma due to the rollback of the Izanagi slab, leading to the oceanward migration of the volcanic arc and the opening of the Proto South China Sea (PSCS). We use the Apennines-Tyrrhenian system in the Mediterranean as an analogue to model this back-arc. Continued rollback detaches South Palawan, Mindoro and the Semitau continental blocks from the stable east Asian margin and transfers them onto Sundaland in the Eocene to produce the Sarawak Orogeny. The extrusion of Indochina and subduction polarity reversal along northern Borneo opens the South China Sea and transfers the Dangerous Grounds-Reed Bank southward to

  3. The Jurassic of Denmark and Greenland: An offshore transgressive–regressive mudstone-dominated succession from the Sinemurian of Skåne, Sweden

    Directory of Open Access Journals (Sweden)

    Surlyk, Finn

    2003-10-01

    Full Text Available A Sinemurian mudstone-dominated succession was exposed until recently in the Gantofta quarry in Skåne, southern Sweden. The deposits are placed in the Döshult and Pankarp Members of the Sinemurian–Aalenian Rya Formation. Similar facies of the same age are widespread in the Danish Basin where they constitute the F-Ib unit (F-I member of the Fjerritslev Formation. The Gantofta succession thus represents the easternmost extension of the environment characteristic of the Fjerritslev Formation and is essentially the only locality where it has been possible tostudy the facies of this formation in outcrop. Sedimentation seems to have taken place under relatively quiet tectonic conditions except for the possible fault-control of the basin margin. Thelower part of the Gantofta section is of Early and early Late Sinemurian age. It represents the upper part of the Döshult Member and consists of muddy, lower shoreface sandstones, abruptlyoverlain by dark, bioturbated, fossiliferous mudstones with thin storm siltstones and sandstones. They are overlain by the Upper Sinemurian Pankarp Member which comprises red-brown, restricted marine calcareous mudstones with an upwards increasing number of storm siltstones and sandstones reflecting general shallowing and shoreline progradation.The succession spans the greater part of two simple sequences with a distal sequence boundary located at the boundary between the Döshult Member and the Pankarp Member. The exposed part of the lower sequence includes a thick transgressive systems tract and a very thin highstand systems tract. The upper sequence is represented by an undifferentiated transgressive and highstand systems tract. An Early Sinemurian sea-level rise, a late Early Sinemurian highstand, an early Late Sinemurian fall and a Late Sinemurian minor rise and a major fall are recognised. Nearby boreholes show evidence for an end-Sinemurian – Early Pliensbachian major rise. This evolution corresponds well with

  4. Fine tuning of dwelling time in friction stir welding for preventing material overheating, weld tensile strength increase and weld nugget size decrease

    Directory of Open Access Journals (Sweden)

    Mijajlović Miroslav M.

    2016-01-01

    Full Text Available After successful welding, destructive testing into test samples from Al 2024-T351 friction stir butt welds showed that tensile strength of the weld improve along the joint line, while dimensions of the weld nugget decrease. For those welds, both the base material and the welding tool constantly cool down during the welding phase. Obviously, the base material became overheated during the long dwelling phase what made conditions for creation of joints with the reduced mechanical properties. Preserving all process parameters but varying the dwelling time from 5-27 seconds a new set of welding is done to reach maximal achievable tensile strength. An analytical-numerical-experimental model is used for optimising the duration of the dwelling time while searching for the maximal tensile strength of the welds

  5. Broad-scale patterns of late jurassic dinosaur paleoecology.

    Directory of Open Access Journals (Sweden)

    Christopher R Noto

    Full Text Available BACKGROUND: There have been numerous studies on dinosaur biogeographic distribution patterns. However, these distribution data have not yet been applied to ecological questions. Ecological studies of dinosaurs have tended to focus on reconstructing individual taxa, usually through comparisons to modern analogs. Fewer studies have sought to determine if the ecological structure of fossil assemblages is preserved and, if so, how dinosaur communities varied. Climate is a major component driving differences between communities. If the ecological structure of a fossil locality is preserved, we expect that dinosaur assemblages from similar environments will share a similar ecological structure. METHODOLOGY/PRINCIPAL FINDINGS: This study applies Ecological Structure Analysis (ESA to a dataset of 100+ dinosaur taxa arranged into twelve composite fossil assemblages from around the world. Each assemblage was assigned a climate zone (biome based on its location. Dinosaur taxa were placed into ecomorphological categories. The proportion of each category creates an ecological profile for the assemblage, which were compared using cluster and principal components analyses. Assemblages grouped according to biome, with most coming from arid or semi-arid/seasonal climates. Differences between assemblages are tied to the proportion of large high-browsing vs. small ground-foraging herbivores, which separates arid from semi-arid and moister environments, respectively. However, the effects of historical, taphonomic, and other environmental factors are still evident. CONCLUSIONS/SIGNIFICANCE: This study is the first to show that the general ecological structure of Late Jurassic dinosaur assemblages is preserved at large scales and can be assessed quantitatively. Despite a broad similarity of climatic conditions, a degree of ecological variation is observed between assemblages, from arid to moist. Taxonomic differences between Asia and the other regions demonstrate at

  6. Chasing the Late Jurassic APW Monster Shift in Ontario Kimberlites

    Science.gov (United States)

    Kent, D. V.; Muttoni, G.; Gee, J. S.; Kjarsgaard, B. A.

    2012-12-01

    A 30° gap was recognized in a composite APW path when global poles from predominantly igneous rocks were assembled in North American coordinates using plate reconstructions (Kent & Irving 2010 JGR). The 'monster shift' occurred between a 160-190 Ma cluster of mean poles at 75-80°N 90-110°E to a 140-145 Ma grouping centered at 60-65°N ~200°E. There are hardly any intermediate igneous poles whereas the rather divergent directions from the Late Jurassic Morrison Formation published by Steiner & Helsley (1975 GSA Bulletin) are subject to adjustments for Colorado Plateau rotation and sedimentary inclination error, neither of which are precisely known for this redbed unit sampled in Colorado. On the other hand, similar large rapid swings have been recognized in the Late Jurassic APW path for Adria (Channell et al. 2010 Paleo3), suggesting a global phenomena. In an effort to fill the data gap between ~145 and 160 Ma, we sampled accessible outcrops/subcrops of kimberlites in the Timiskaming area of Ontario, Canada, that are associated with high precision U-Pb perovskite ages (Heamon & Kjarsgaard 2000 EPSL). We report initial results from two of the intrusions: the 153.6±2.4 Ma Peddie kimberlite from outcrop and the Triple B kimberlite that was accessible by trenching and is assumed to be the same age as the nearby 153.7±1.8 Ma Seed kimberlite as delineated by aeromagnetic surveys and borings. Systematic progressive thermal demagnetization indicated in each unit a dominant characteristic component with unblocking temperatures to 575° that presumably reflect a magnetite carrier that will be checked by further rock magnetic experiments. Samples from the Peddie kimberlite had stable downward (normal polarity) magnetizations whose mean direction gives a paleopole at 73°N 184°E. In contrast, samples from the Triple B kimberlite have upward (reverse polarity) magnetizations with a well-grouped direction whose (north) paleopole is 78°N 197°E, proximal to the Peddie

  7. Measuring the zeta potential. The relationships with sandstone fineness

    Directory of Open Access Journals (Sweden)

    de Luxán, M. P.

    1989-09-01

    Full Text Available The application of the zeta potential technique in the area of construction materials and Portland cement is quite recent. The initial research work involved the study of cement suspensions or suspensions of one of the components of cement, such as alite, tricalcium alumínate, in the presence of additives and, more specifically, superplasticizers. The studies of this sort were extended with the mixing of active additions into cement (fly ashes, etc.. The present study discusses the application of siliceous materials (sandstone as a basis of the research into the behaviour of sandstone mortars containing repair products.

    La aplicación de la técnica del potencial zeta en el campo de los materiales de construcción y del cemento portland es muy reciente. Las primeras investigaciones se refieren al estudio de suspensiones de cemento o de alguno de sus compuestos que lo forman como alita, aluminato tricálcico, en presencia de aditivos y, más concretamente, de superfluidificantes. Con la incorporación de adiciones activas al cemento (cenizas volantes,... se amplían los estudios de este tipo de cementos. En este trabajo se considera la aplicación a los materiales silíceos (arenisca como base para la investigación del comportamiento de los morteros de arenisca conteniendo productos de reparación.

  8. The Creep Properties of Fine Sandstone under Uniaxial Tensile Stress

    Directory of Open Access Journals (Sweden)

    Jiang Haifei

    2015-09-01

    Full Text Available A graduated uniaxial direct tensile creep test for fine sandstone is conducted by adopting a custom-designed direct tensile test device for rock. The experiment shows that the tensile creep of fine sandstone has similar creep curve patterns to those of compression creep, while the ratios of the creep strain to the total strain obtained in the tensile tests are substantially higher than those obtained for similar compression tests, which indicates that the creep ability of rock in the tensile process is higher than that in the uniaxial compression process. Based on the elastic modulus in the approximately linear portion of the obtained isochronous stress-strain curves of the tensile creep, the time dependence of the elasticity modulus for the Kelvin model is evaluated, and a revised generalized Kelvin model is obtained by substitution into the generalized Kelvin model. A new viscousplastic model is proposed to describe the accelerated creep properties, and this model is combined in series with the revised generalized Kelvin model to form a new nonlinear viscoelastic-plastic creep model that can describe the properties of attenuation creep, steady creep, and accelerated creep. Comparison of the test and theoretical curves demonstrates that they are nearly identical, which verifies the performance of the model.

  9. Microstructural changes of sandstone specimens during CO2 injection

    Science.gov (United States)

    Park, J. H.; Son, J.; Oh, M.; Park, H. D.

    2014-12-01

    Carbon dioxide capture and storage (CCS) is a technology to isolate CO2 from atmosphere, by capturing it from sources, transporting it to injection area, and injecting it into suitable geological formation, ocean, or mineral carbonation plant. Geological storage of carbon dioxide is the most effective and economical method, and until now a lot of demonstration projects were carried out successfully such as Sleipner, Weyburn, and In Salah. In Republic of Korea, small-scale CO2 injection demonstration project is now under investigation in offshore Pohang Basin with sandstone reservoir and the mudstone caprock. When CO2 is injected in target site, the rock around injection well can be deteriorated because of extreme change of temperature and pressure. In this study supercritical CO2 was injected in sandstone specimen and the initiation and propagation of fracture inside the specimens were observed using X-ray computed tomography (CT). X-ray CT method is a computer technology to observe inner density of target object in three dimensional image. Because of its non-destructivity and high resolution, it is suitable for consistent observation of the same specimen. Porosity and permeability of the specimens were measured using X-ray CT images and both of them were increased after injection. P- and S-wave velocity were also measured to assess the change of mechanical property and both of them were decreased after injection because of growth of inner fractures. The data from this research can be used as input data of CCS site.

  10. Water coning mechanism in Tarim fractured sandstone gas reservoirs

    Institute of Scientific and Technical Information of China (English)

    沈伟军; 刘晓华; 李熙喆; 陆家亮

    2015-01-01

    The problem of water coning into the Tarim fractured sandstone gas reservoirs becomes one of the major concerns in terms of productivity, increased operating costs and environmental effects. Water coning is a phenomenon caused by the imbalance between gravity and viscous forces around the completion interval. There are several controllable and uncontrollable parameters influencing this problem. In order to simulate the key parameters affecting the water coning phenomenon, a model was developed to represent a single well with an underlying aquifer using the fractured sandstone gas reservoir data of the A-Well in Dina gas fields. The parametric study was performed by varying six properties individually over a representative range. The results show that matrix permeability, well penetration (especially fracture permeability), vertical-to-horizontal permeability ratio, aquifer size and gas production rate have considerable effect on water coning in the fractured gas reservoirs. Thus, investigation of the effective parameters is necessary to understand the mechanism of water coning phenomenon. Simulation of the problem helps to optimize the conditions in which the breakthrough of water coning is delayed.

  11. Dispersion analysis of velocity and attenuation in Berea sandstone

    Science.gov (United States)

    Winkler, Kenneth W.

    1985-07-01

    Ultrasonic velocity and attenuation measurements were made on dry, brine- and oil-saturated Berea sandstone and fused glass beads. The results for fused glass beads are consistent with the predictions of Biot theory. They indicate that as predicted, the Biot absorption/dispersion mechanism shifts to higher frequencies as the fluid viscosity increases. Similar data for Berea sandstone are not consistent with Biot theory, since observed velocities are generally higher than predicted. Using the Biot theory, we calculate low- and high-frequency velocities for the liquid-saturated samples. "Biot dispersion" is then defined as the percent difference between the low- and high-frequency limits. "Apparent dispersion" is defined as the percent difference between the measured ultrasonic velocity and the low-frequency Biot limit. Comparison of these two measures of dispersion gives insight into the presence of a non-Biot absorption/dispersion mechanism. Whenever the apparent dispersion is larger than the Biot dispersion, the extra dispersion is interpreted as being caused by a local flow relaxation. To be consistent with attenuation data, this relaxation must be distributed over at least five to six decades in frequency.

  12. Selected trace and minor elements in sandstones from Paraguay

    Energy Technology Data Exchange (ETDEWEB)

    Facetti-Masulli, J.F.; Gonzalez, E. [Hydroconsult SRL, Asuncion (Paraguay); Kump, P. [J. Stefan Inst., Ljubljana (Slovenia)

    2010-07-01

    Selected trace and minor elements analyzed by XRF in sandstone samples were Rb-Sr-Zr-Nb-Ba-La-Ce-Nd as well as Ti-Mn-Fe with which they are often correlated. Refractory elements like REE are considered useful indicators of geochemical processes and, in this case, of provenance. Usually they maintain their original relationships and are transferred almost directly into sediments. The values here found, absolute and normalized, show correlations among the samples, allowing the establishment of their origin. Most of them in the spidergram patterns display positive spikes of Zr, and negative anomalies at Nb, Sr, Ti: differences in their height/depth could be in relation with the different Series or Formations. Strikingly, spidergrams of samples collected from the Patino Formation show marked negative anomalies interalia of Ba, as well as positive spikes of Nb and Zr, very similar to those found in magmatic specimens from Misiones, Carapegua-Acahay and Alto Paraguay Province and quite different from the other analyzed samples. In addition a remarkable presence of Precambrian signatures were found in the analyzed sandstones from the Paleozoic. (orig.)

  13. Acoustic Emission Parameters of Three Gorges Sandstone during Shear Failure

    Directory of Open Access Journals (Sweden)

    Xu Jiang

    2016-12-01

    Full Text Available In this paper, an experimental investigation of sandstone samples from the Three Gorges during shear failure was conducted using acoustic emission (AE and direct shear tests. The AE count rate, cumulative AE count, AE energy, and amplitude of the sandstone samples were determined. Then, the relationships among the AE signals and shearing behaviors of the samples were analyzed in order to detect micro-crack initiation and propagation and reflect shear failure. The results indicated that both the shear strength and displacement exhibited a logarithmic relationship with the displacement rate at peak levels of stress. In addition, the various characteristics of the AE signals were apparent in various situations. The AE signals corresponded with the shear stress under different displacement rates. As the displacement rate increased, the amount of accumulative damage to each specimen decreased, while the AE energy peaked earlier and more significantly. The cumulative AE count primarily increased during the post-peak period. Furthermore, the AE count rate and amplitude exhibited two peaks during the peak shear stress period due to crack coalescence and rock bridge breakage. These isolated cracks later formed larger fractures and eventually caused ruptures.

  14. Core-log integration for a Saudi Arabian sandstone reservoir

    Energy Technology Data Exchange (ETDEWEB)

    Saha, S.; Al-Kaabi, A.U.; Amabeoku, M.O.; Al-Fossail, K.

    1995-10-01

    For a detailed characterization of a reservoir, core-log integration is essential. In this paper, data integration from logs and cores of a Saudi Arabian sandstone reservoir is discussed with particular attention to effects of clay on resistivity logs and water saturation. There are four sources of data, namely, core resistivity measurement, clay study from cores (XRD, CEC), spectral core gamma ray, and well logs. In order to generate continuous cation exchange capacity (CEC) with depth, spectral gamma ray measurements (both from core and downhole log) and CEC from cores and correlated. Q{sub v} (CEC per unit pore volume) values are calculated utilizing only well logs by applying Waxman-Smits equation in water bearing zone. Log derived Q{sub v} values from water zone were then correlated with porosity to generate Q{sub v} values in the oil column and compared with core derived Z{sub v}. Finally, data from well logs (porosity, resistivity and Q{sub v}) and cores (resistivity parameters m, n, and Q{sub v}) were integrated for more accurate water saturation calculation. The core-log correlation can be applied to other wells avoiding expensive core analysis, and the technique developed in this project can be used in other sandstone reservoirs.

  15. Distribution characteristics and petroleum geological significance of the Silurian asphaltic sandstones in Tarim Basin

    Institute of Scientific and Technical Information of China (English)

    ZHANG; Jun; PANG; Xiongqi; LIU; Luofu; JIANG; Zhenxue; LIU

    2004-01-01

    The Tarim Basin is a typical superimposed basin in which there have occurred multiphase adjustment and destruction of the reservoirs. The widely distributed asphaltic sandstones of the Silurian are the very product after destruction of the reservoirs. Studies show that the Silurian asphaltic sandstones distributed in both the middle and western parts on the basin are controlled chiefly by the Caledonian oil source area and by the Tazhong, Tabei and Bachu uplifts, whereas the distribution of the asphaltic sandstones on local structural belts is controlled by the reservoir's sedimentary system. Vertically, most of the asphaltic sandstones are under the regional caprock of red mudstones and the upper sandstone section of compact lithology. Due to the difference of hydrocarbon destruction in the early stage and the influence of hydrocarbon recharge in the late stage, the asphaltic sandstones and oil-bearing sandstones in the Tazhong area can be vertically divided into the upper and lower sections and they have an interactive distribution relationship as well. Asphaltic sandstones exist not only in intergranular pores but also inside the grains of sand and between the crevices, proving the destruction of early reservoirs due to uplifting. The existence of asphaltic sandstones over a large area reveals that the large-scale migration and accumulation and the subsequent destruction of hydrocarbons in the Craton area. The destruction caused a loss of the reserve resources of the Palaeozoic amounting to nearly 13.3 billion tons. Asphaltic sandstones formed after the destruction of oil and gas may serve as an effective caprock which is beneficial to accumulation of hydrocarbons and formation of the pool sealed by asphaltic sandstones in the later stage. The destruction of the early Silurian hydrocarbons depends on the stratigraphic burial depth. The deep part under the northern slope of Tazhong is an area favorable to search of undestroyed Silurian oil reservoirs.

  16. THE TRIASSIC/JURASSIC BOUNDARY IN THE ANDES OF ARGENTINA

    Directory of Open Access Journals (Sweden)

    ALBERTO C. RICCARDI

    2004-03-01

    Full Text Available The Arroyo Malo Formation at Alumbre Creek, on the northern bank of the Atuel River, west central Argentina, comprises a c. 300 m thick continuous marine succession across the Triassic-Jurassic System boundary, consisting of massive and laminated pelites indicative of a slope depositional environment. Late Triassic invertebrates, including ammonoids, nautiloids, bivalves, gastropods, brachiopods and corals are restricted to the lower 150 m. Beds between 125-135 m from the bottom yield Choristoceras cf. marshi Hauer, a species found in the Marshi/Crickmayi Zone of Europe and North America, together with loose fragments of Psiloceras cf. pressum Hillebrandt, coeval with the lower to middle part of the Hettangian Planorbis Zone. About 80 m higher are beds yielding Psiloceras cf. rectocostatum Hillebrandt, a species that gives name to an Andean biozone partially coeval with the Johnstoni and Plicatulum Subzones, upper Planorbis Zone. Other fossils recorded in the Rhaetian strata of this section are foraminifers, ostracods and plant remains identified as Zuberia cf. zuberi (Szaj. Freng. and Clathropteris sp. The section was also sampled for conodonts and radiolarians, thus far with negative results. A palaeomagnetic study is underway.

  17. Post-Jurassic mammal-like reptile from the Palaeocene.

    Science.gov (United States)

    Fox, R C; Youzwyshyn, G P; Krause, D W

    1992-07-16

    Mammal-like reptiles of the order Therapsida document the emergence of mammals from more primitive synapsids and are of unique zoological and palaeontological interest on that account. Therapsids, first appearing in the Early Permian, were thought to become extinct in the Middle Jurassic, soon after the Late Triassic origin of mammals. Here, however, we report the discovery of a therapsid from the late Palaeocene, 100 million years younger than the youngest previous occurrence of the order. This discovery nearly doubles the stratigraphic range of therapsids and furnishes their first record from the Cenozoic. The documenting fossils, an incomplete dentary containing three teeth, and four isolated teeth from other, conspecific individuals (Fig. 1), are from the Paskapoo Formation, at Cochrane, Alberta, Canada, from beds yielding a diverse mammalian fauna of early Tiffanian age. These specimens are catalogued in the collections of the University of Alberta Laboratory for Vertebrate Paleontology (UALVP) and provide the basis for a new taxon, as named and described below: (see text)

  18. Boron-containing organic pigments from a Jurassic red alga

    Science.gov (United States)

    Wolkenstein, Klaus; Gross, Jürgen H.; Falk, Heinz

    2010-01-01

    Organic biomolecules that have retained their basic chemical structures over geological periods (molecular fossils) occur in a wide range of geological samples and provide valuable paleobiological, paleoenvironmental, and geochemical information not attainable from other sources. In rare cases, such compounds are even preserved with their specific functional groups and still occur within the organisms that produced them, providing direct information on the biochemical inventory of extinct organisms and their possible evolutionary relationships. Here we report the discovery of an exceptional group of boron-containing compounds, the borolithochromes, causing the distinct pink coloration of well-preserved specimens of the Jurassic red alga Solenopora jurassica. The borolithochromes are characterized as complicated spiroborates (boric acid esters) with two phenolic moieties as boron ligands, representing a unique class of fossil organic pigments. The chiroptical properties of the pigments unequivocally demonstrate a biogenic origin, at least of their ligands. However, although the borolithochromes originated from a fossil red alga, no analogy with hitherto known present-day red algal pigments was found. The occurrence of the borolithochromes or their possible diagenetic products in the fossil record may provide additional information on the classification and phylogeny of fossil calcareous algae. PMID:20974956

  19. Eurycormus – Eurypoma, two Jurassic actinopterygian genera with mixed identity

    Directory of Open Access Journals (Sweden)

    G. Arratia

    2007-02-01

    Full Text Available Three Late Jurassic actinopterygian species are commonly placed in the genus Eurycormus: E. egertoni, E. grandis and E. speciosus. A detailed comparison supports an earlier assignment to two different genera, Eurycormus Wagner, 1863 (speciosus and Eurypoma Huxley, 1866 (E. egertoni and E. grande. Systematically, the two genera are only distantly related; Eurycormus belongs to the Teleosteomorpha, whereas Eurypoma is a halecomorph closely related to or a member of the Caturoidea within the Amiiformes. Drei oberjurassische Actinopterygier-Arten, egertoni, grandis und speciosus, werden gewöhnlich zur Gattung Eurycormus gestellt. Ein detaillierter Vergleich der drei Arten bestätigt eine frühere Zuordnung zu zwei verschiedenen Gattungen, Eurycormus Wagner, 1863 (speciosus und Eurypoma Huxley, 1866 (E. egertoni und E. grande, die zwei höheren Taxa innerhalb der Neopterygii zugeordnet werden: Eurycormus zu den Teleosteomorpha und Eurypoma zu den Amiiformes innerhalb der Halecomorphi, möglicherweise nahe oder innerhalb der Caturoidea. doi:10.1002/mmng.200600016

  20. Ichnological evidence of Megalosaurid Dinosaurs Crossing Middle Jurassic Tidal Flats.

    Science.gov (United States)

    Razzolini, Novella L; Oms, Oriol; Castanera, Diego; Vila, Bernat; Santos, Vanda Faria Dos; Galobart, Àngel

    2016-08-19

    A new dinosaur tracksite in the Vale de Meios quarry (Serra de Aire Formation, Bathonian, Portugal)preserves more than 700 theropod tracks. They are organized in at least 80 unidirectional trackways arranged in a bimodal orientation pattern (W/NW and E/SE). Quantitative and qualitative comparisons reveal that the large tridactyl, elongated and asymmetric tracks resemble the typical Late Jurassic-Early Cretaceous Megalosauripus ichnogenus in all morphometric parameters. Few of the numerous tracks are preserved as elite tracks while the rest are preserved as different gradients of modified true tracks according to water content, erosive factors, radial fractures and internal overtrack formations. Taphonomical determinations are consistent with paleoenvironmental observations that indicate an inter-tidal flat located at the margin of a coastal barrier. The Megalosauripus tracks represent the oldest occurrence of this ichnotaxon and are attributed to large megalosaurid dinosaurs. Their occurrence in Vale de Meios tidal flat represents the unique paleoethological evidence of megalosaurids moving towards the lagoon, most likley during the low tide periods with feeding purposes.

  1. Ichnological evidence of Megalosaurid Dinosaurs Crossing Middle Jurassic Tidal Flats

    Science.gov (United States)

    Razzolini, Novella L.; Oms, Oriol; Castanera, Diego; Vila, Bernat; Santos, Vanda Faria Dos; Galobart, Àngel

    2016-08-01

    A new dinosaur tracksite in the Vale de Meios quarry (Serra de Aire Formation, Bathonian, Portugal)preserves more than 700 theropod tracks. They are organized in at least 80 unidirectional trackways arranged in a bimodal orientation pattern (W/NW and E/SE). Quantitative and qualitative comparisons reveal that the large tridactyl, elongated and asymmetric tracks resemble the typical Late Jurassic-Early Cretaceous Megalosauripus ichnogenus in all morphometric parameters. Few of the numerous tracks are preserved as elite tracks while the rest are preserved as different gradients of modified true tracks according to water content, erosive factors, radial fractures and internal overtrack formations. Taphonomical determinations are consistent with paleoenvironmental observations that indicate an inter-tidal flat located at the margin of a coastal barrier. The Megalosauripus tracks represent the oldest occurrence of this ichnotaxon and are attributed to large megalosaurid dinosaurs. Their occurrence in Vale de Meios tidal flat represents the unique paleoethological evidence of megalosaurids moving towards the lagoon, most likley during the low tide periods with feeding purposes.

  2. Lower Jurassic beds with bivalves in south Slovenia

    Directory of Open Access Journals (Sweden)

    Irena Debeljak

    1995-12-01

    Full Text Available The Lower Jurassic beds of south Slovenia outcrop on a surface of several hundred km^ with their thickness in places exceeding 300 meters. They were deposited on the Dinaric Carbonate Platform. In them rich accumulations of characteristic bivalves occur that in Pliensbachian and Toarcian inhabited the wide interconnected shallow water regions of the western and southern margins of Tethysand the eastern Pacific. The most interesting are three large bivalve species:Lithiotis problematica, Cochlearites loppianus and Lithiopedalion scutatus.In addition, numerous other genera can be found: Gervilleiopema, Mytilus, Opisoma and Pachyrisma (with subgenera Pachymegalodon and Durga.The bivalves formed in the region of south Slovenia, in the prevailingly quiet environment of the restricted shelf, sea-bottom mats or biostromes. Their shells can be only rarely found in their growth position. The horizon with bivalves ("lithiotid horizon" in south Slovenia is attributed to Pliensbachian (Domerian. It isup to 75 metres thick and it almost does not pinch out. Within it individual lumachelles of bivalves occur which are from several centimetres to ten metres thick.They are almost exclusively associated with dark, micritic, in places marly limestone and bituminous dolomite. The biodiversity in lumachelles is very low. The intermediate beds that do not contain bivalves mostly consist of oolitic and biospariticlimestone. In this article some localities from various areas of the carbonate platform are described. Considered are paleogeographical and paleoecological conditions that permitted the existence of this typical bivalve fauna.

  3. Neuroanatomy of the marine Jurassic turtle Plesiochelys etalloni (Testudinata, Plesiochelyidae).

    Science.gov (United States)

    Carabajal, Ariana Paulina; Sterli, Juliana; Müller, Johannes; Hilger, André

    2013-01-01

    Turtles are one of the least explored clades regarding endocranial anatomy with few available descriptions of the brain and inner ear of extant representatives. In addition, the paleoneurology of extinct turtles is poorly known and based on only a few natural cranial endocasts. The main goal of this study is to provide for the first time a detailed description of the neuroanatomy of an extinct turtle, the Late Jurassic Plesiochelysetalloni, including internal carotid circulation, cranial endocast and inner ear, based on the first digital 3D reconstruction using micro CT scans. The general shape of the cranial endocast of P. etalloni is tubular, with poorly marked cephalic and pontine flexures. Anteriorly, the olfactory bulbs are clearly differentiated suggesting larger bulbs than in any other described extinct or extant turtle, and indicating a higher capacity of olfaction in this taxon. The morphology of the inner ear of P. etalloni is comparable to that of extant turtles and resembles those of slow-moving terrestrial vertebrates, with markedly low, short and robust semicircular canals, and a reduced lagena. In P. etalloni the arterial pattern is similar to that found in extant cryptodires, where all the internal carotid branches are protected by bone. As the knowledge of paleoneurology in turtles is scarce and the application of modern techniques such as 3D reconstructions based on CT scans is almost unexplored in this clade, we hope this paper will trigger similar investigations of this type in other turtle taxa.

  4. Tunasniyoj, a dinosaur tracksite from the Jurassic-Cretaceous boundary of Bolivia

    Directory of Open Access Journals (Sweden)

    Sebastián Apesteguía

    2011-03-01

    Full Text Available Here we report a superbly preserved and profusely represented five-ichnotaxa dinosaur track assemblage near Icla village, 100 km southeast of Sucre, Bolivia. As preserved in reddish Jurassic-Cretaceous boundary aeolian sandstones, this rich and uncommon assemblage is, additionally, the oldest dinosaur tracksite for Bolivia. Four trackmakers were identified in the area: three quadrupedal and one bipedal, all of them with tracks of around 35 cm in lenght. One of the quadrupedals is represented by no less than five adult individuals (ichnotaxon A, and four purported juveniles (ichnotaxon B walking in association. The other two quadrupedals (ichnotaxa C and D involve four trackways, and the last, the bipedal trackmaker (ichnotaxon E, is represented by one trackway. The five ichnotaxa represented in the "Palmar de Tunasniyoj" could be tentatively assigned to the following trackmakers: Ichnotaxa A and B are assigned to basal stegosaurians; ichnotaxon C to a basal tyreophoran, perhaps related to the ankylosaur lineage; ichnotaxon D to the Ankylosauria, and ichnotaxon E to Theropoda. The Tunasniyoj assemblage, the oldest dinosaur tracksite for Bolivia, includes the oldest known evidence assigned to ankylosaurs and stegosaurs for South America.Neste estudo é relatado um conjunto magnificamente preservado de pistas de dinossauros representados por cinco táxons distintos, situado próximo à Vila de Icla, 100 quilômetros a sudeste do Sucre, Bolívia. Preservados em arenitos eólicos avermelhados do limite Jurássico-Cretáceo. Quatro formas geradoras foram identificadas na área, sendo três quadrúpedes e um bípede, todos com as pegadas com cerca de 35 cm de comprimento. Um dos quadrúpedes (trilhas tipos A e B é representado por pelo menos seis indivíduos em dois grupos de três, com adultos e juvenis juntos. Os outros dois quadrúpedes (trilhas tipos C e D são geradores de quatro trilhas, e um gerador bípede (trilha E, é representado por uma

  5. Jurassic sedimentary evolution of southern Junggar Basin:Implication for palaeoclimate changes in northern Xinjiang Uygur Autonomous Region, China

    Institute of Scientific and Technical Information of China (English)

    Shun-Li Li; Xing-He Yu; Cheng-Peng Tan; Ronald Steel

    2014-01-01

    Junggar Basin, located in northern Xinjiang, presents continuous and multi-kilometer-thick strata of the Jurassic deposits. The Jurassic was entirely terrestrial lfuvial and lacustrine deltaic sedimentation. Eight outcrop sections across the Jurassic strata were meas-ured at a resolution of meters in southern Junggar Basin. Controlling factors of sedimentary evolution and palaeoclimate changes in Junggar Basin during the Jurassic were discussed based on lithology, fossils and tectonic setting. In the Early to Middle Jurassic, the warm and wide Tethys Sea generated a strong monsoonal circulation over the central Asian continent, and provided adequate moisture for Junggar Basin. Coal-bearing strata of the Badaowan, Sangonghe, and Xishanyao Formations were developed under warm and humid palaeocli-mate in Junggar Basin. In the late Middle Jurassic, Junggar Basin was in a semi-humid and semi-arid environment due to global warming event. Stratigraphy in the upper part of the Mid-dle Jurassic with less plant fossils became multicolor or reddish from dark color sediments. During the Late Jurassic, collision of Lhasa and Qiangtang Block obstructed monsoon from the Tethys Sea. A major change in climate from semi-humid and semi-arid to arid conditions took place, and reddish strata of the Upper Jurassic were developed across Junggar Basin.

  6. Jurassic sedimentary evolution of southern Junggar Basin:Implication for palaeoclimate changes in northern Xinjiang Uygur Autonomous Region,China

    Institute of Scientific and Technical Information of China (English)

    Shun-Li; Li; Xing-He; Yu; Cheng-Peng; Tan; Ronald; Steel

    2014-01-01

    Junggar Basin,located in northern Xinjiang,presents continuous and multikilometer-thick strata of the Jurassic deposits.The Jurassic was entirely terrestrial fluvial and lacustrine deltaic sedimentation.Eight outcrop sections across the Jurassic strata were measured at a resolution of meters in southern Junggar Basin.Controlling factors of sedimentary evolution and palaeoclimate changes in Junggar Basin during the Jurassic were discussed based on lithology,fossils and tectonic setting.In the Early to Middle Jurassic,the warm and wide Tethys Sea generated a strong monsoonal circulation over the central Asian continent,and provided adequate moisture for Junggar Basin.Coal-bearing strata of the Badaowan,Sangonghe,and Xishanyao Formations were developed under warm and humid palaeoclimate in Junggar Basin.In the late Middle Jurassic,Junggar Basin was in a semi-humid and semi-arid environment due to global warming event.Stratigraphy in the upper part of the Middle Jurassic with less plant fossils became multicolor or reddish from dark color sediments.During the Late Jurassic,collision of Lhasa and Qiangtang Block obstructed monsoon from the Tethys Sea.A major change in climate from semi-humid and semi-arid to arid conditions took place,and reddish strata of the Upper Jurassic were developed across Junggar Basin.

  7. Jurassic sedimentary evolution of southern Junggar Basin: Implication for palaeoclimate changes in northern Xinjiang Uygur Autonomous Region, China

    Directory of Open Access Journals (Sweden)

    Shun-Li Li

    2014-04-01

    Full Text Available Junggar Basin, located in northern Xinjiang, presents continuous and multikilometer-thick strata of the Jurassic deposits. The Jurassic was entirely terrestrial fluvial and lacustrine deltaic sedimentation. Eight outcrop sections across the Jurassic strata were measured at a resolution of meters in southern Junggar Basin. Controlling factors of sedimentary evolution and palaeoclimate changes in Junggar Basin during the Jurassic were discussed based on lithology, fossils and tectonic setting. In the Early to Middle Jurassic, the warm and wide Tethys Sea generated a strong monsoonal circulation over the central Asian continent, and provided adequate moisture for Junggar Basin. Coal-bearing strata of the Badaowan, Sangonghe, and Xishanyao Formations were developed under warm and humid palaeoclimate in Junggar Basin. In the late Middle Jurassic, Junggar Basin was in a semi-humid and semi-arid environment due to global warming event. Stratigraphy in the upper part of the Middle Jurassic with less plant fossils became multicolor or reddish from dark color sediments. During the Late Jurassic, collision of Lhasa and Qiangtang Block obstructed monsoon from the Tethys Sea. A major change in climate from semi-humid and semi-arid to arid conditions took place, and reddish strata of the Upper Jurassic were developed across Junggar Basin.

  8. A New Basal Sauropod Dinosaur from the Middle Jurassic of Niger and the Early Evolution of Sauropoda

    Science.gov (United States)

    Remes, Kristian; Ortega, Francisco; Fierro, Ignacio; Joger, Ulrich; Kosma, Ralf; Marín Ferrer, José Manuel; Ide, Oumarou Amadou; Maga, Abdoulaye

    2009-01-01

    Background The early evolution of sauropod dinosaurs is poorly understood because of a highly incomplete fossil record. New discoveries of Early and Middle Jurassic sauropods have a great potential to lead to a better understanding of early sauropod evolution and to reevaluate the patterns of sauropod diversification. Principal Findings A new sauropod from the Middle Jurassic of Niger, Spinophorosaurus nigerensis n. gen. et sp., is the most complete basal sauropod currently known. The taxon shares many anatomical characters with Middle Jurassic East Asian sauropods, while it is strongly dissimilar to Lower and Middle Jurassic South American and Indian forms. A possible explanation for this pattern is a separation of Laurasian and South Gondwanan Middle Jurassic sauropod faunas by geographic barriers. Integration of phylogenetic analyses and paleogeographic data reveals congruence between early sauropod evolution and hypotheses about Jurassic paleoclimate and phytogeography. Conclusions Spinophorosaurus demonstrates that many putatively derived characters of Middle Jurassic East Asian sauropods are plesiomorphic for eusauropods, while South Gondwanan eusauropods may represent a specialized line. The anatomy of Spinophorosaurus indicates that key innovations in Jurassic sauropod evolution might have taken place in North Africa, an area close to the equator with summer-wet climate at that time. Jurassic climatic zones and phytogeography possibly controlled early sauropod diversification. PMID:19756139

  9. A new basal sauropod dinosaur from the middle Jurassic of Niger and the early evolution of sauropoda.

    Directory of Open Access Journals (Sweden)

    Kristian Remes

    Full Text Available BACKGROUND: The early evolution of sauropod dinosaurs is poorly understood because of a highly incomplete fossil record. New discoveries of Early and Middle Jurassic sauropods have a great potential to lead to a better understanding of early sauropod evolution and to reevaluate the patterns of sauropod diversification. PRINCIPAL FINDINGS: A new sauropod from the Middle Jurassic of Niger, Spinophorosaurus nigerensis n. gen. et sp., is the most complete basal sauropod currently known. The taxon shares many anatomical characters with Middle Jurassic East Asian sauropods, while it is strongly dissimilar to Lower and Middle Jurassic South American and Indian forms. A possible explanation for this pattern is a separation of Laurasian and South Gondwanan Middle Jurassic sauropod faunas by geographic barriers. Integration of phylogenetic analyses and paleogeographic data reveals congruence between early sauropod evolution and hypotheses about Jurassic paleoclimate and phytogeography. CONCLUSIONS: Spinophorosaurus demonstrates that many putatively derived characters of Middle Jurassic East Asian sauropods are plesiomorphic for eusauropods, while South Gondwanan eusauropods may represent a specialized line. The anatomy of Spinophorosaurus indicates that key innovations in Jurassic sauropod evolution might have taken place in North Africa, an area close to the equator with summer-wet climate at that time. Jurassic climatic zones and phytogeography possibly controlled early sauropod diversification.

  10. Desalination of salt damaged Obernkirchen sandstone by an applied DC field

    DEFF Research Database (Denmark)

    Matyščák, Ondřej; Ottosen, Lisbeth M.; Rörig-Dalgaard, Inge

    2014-01-01

    Soluble salts are considered as one of the most common causes for decay of building materials. In the present work, an electrokinetic method for desalination of sandstones from a historic warehouse was tested. The sandstones claddings were removed from the warehouse during a renovation action as ...

  11. Mechanism of Suppressing ASR Using Ground Reactive Sandstone Powders instead of Cement

    Institute of Scientific and Technical Information of China (English)

    LI Yang; HE Zhen; HU Shuguang

    2015-01-01

    In order to understand the effect of powders ground from reactive sandstone replacing cement on reducing or suppressing alkali-silica reaction (ASR), and to identify the mechanism of suppressing ASR by this powders, mortar and paste containing reactive sandstone powders of four replacement levels ranging from 10wt% to 40wt% and four specific surfaces areas ranging from 210 m2/kg to 860 m2/kg were studied. The experimental results showed that incorporation of 40wt%reactive sandstone powders could suppress ASR effectively except for mortar containing reactive sandstone powders with specific surface area of 610 m2/kg, which disagreed with the most results reported that the higher reactive powder specific surface area, the smaller ASR expansion. By means of flame photometry, Fourier transform infrared spectroscopy (FT-IR) and thermo gravimetric analysis (TG), the mechanism of reactive sandstone powders on reducing or suppressing ASR was soluble alkalis type of reactive sandstone powders and the competition of liberating and bonding alkali of cement paste containing reactive sandstone powders,when the ability of alkali bonding was greater than the ability of alkali liberation, ASR caused by reactive sandstone was supressed effectively.

  12. The sandstone's chromatic alteration of the florentine cultural heritage

    Science.gov (United States)

    Vettori, S.; Pecchioni, E.; Cantisani, E.; Ricci, M.; Fratini, F.; Garzonio, C. A.

    2012-04-01

    Pietra Serena is one of the materials more used in Florentine architecture. It is a sandstone that outcrops in the hills north of the city in the municipality of Fiesole and it has been employed mainly for ornamental purposes. This litotype belongs to the the Macigno Formation (Oligocene Upper- Miocene Lower) which consists of beds of turbiditic sandstones separated by pelitic levels which are the finest components of each single turbidity layer. Petrographically, Pietra Serena can be defined as a medium-coarse-grained greywacke made of quartz, feldspars, micas, fragments of metamorphic and magmatic rocks. The clayey matrix is quite abundant, mainly composed by illite, kaolinite and chlorite-vermiculite (present only in some quarries). It is well known that the processes of decay of the sandstones are related to the type of matrix, the amount of cement, the kind of clay minerals and to the pore size distribution, which lead to water infiltrations, swelling of the clay minerals, separation of the clayey matrix, with resulting exfoliation and peeling of the stone artefacts. Pietra Serena has a bluish-grey colour in fresh cut, but many times it is easily oxidized acquiring an ochraceous-reddish brown colour on buildings. Such changes in colour, appear to be due in part to the oxidation of iron, proceeding very quickly from the surface to the inside, though the cohesion is not affected. It is possible to hypothesize that the chromatic changes not necessarily involve a progressive state of alteration of the artefact, but they may often to represents a natural patina acquired with the time. Nevertheless it is necessary to remember that the oxidized layer and its hardness could also be the result of treatments performed in the past. In Florence, several monuments and buildings are affected by such phenomenon, in particular it is possible to note an intense and diffuse reddish colouring on the Pietra Serena utilized for columns and for façade's decorations. In this work

  13. On the origin and glacial transport of erratics of Jotnian sandstone in southwestern Finland

    Directory of Open Access Journals (Sweden)

    Donner, J.

    1996-12-01

    Full Text Available Late Proterozoic Jotnian sandstone erratics were transported during the last Quaternary glaciation from the source area in Satakunta at the coast of southwestern Finland and the bottom of the Bothnian Sea to the southeast as far as Estonia, Latvia and Russia. The frequencies of the sandstone erratics show that they were transported greater distances than indicators of other rocks in the southern parts of Finland. In addition, high frequencies in small areas, south of Salo and in Bromarv, indicate that there are or were small separate source areas of Jotnian sandstone outside the main area. This is supported by the distribution of erratics of Cambrian sandstone and Ordovician sedimentary rocks in the same area. The tracing of possible small occurrences of Jotnian sandstone or Palaeozoic rocks is, however, difficult in an area with numerous faults and fracture zones in the Precambrian bedrock, where the depressions are covered by thick Quaternary drift.

  14. The Upper Cretaceous Ostravice Sandstone in the Polish sector of the Silesian Nappe, Outer Western Carpathians

    Directory of Open Access Journals (Sweden)

    Cieszkowski Marek

    2016-04-01

    Full Text Available The Ostravice Sandstone Member was identified and described as a lithostratigraphic unit in the Polish part of the Outer Carpathians. This division occurs in the lowermost part of the Godula Formation, is underlain by variegated deposits of the Mazák Formation or directly by the Barnasiówka and Lhoty formations, and overlain by the Czernichów Member of the Godula Formation. Domination by thick- and very thick-bedded sandstones, conglomeratic sandstones and conglomerates rich in calcareous clasts, mostly of the Štramberk-type limestones, is typical for the Ostravice Sandstone Member. These deposits are widespread between the Moravskoslezské Beskydy Mountains in the Czech Republic and the Ciężkowice Foothills in Poland. The documentation of the Ostravice Sandstone Member occurrence as well as the petrological, sedimentological features, and inventory of the carbonate clasts are presented here.

  15. Thermochronology of Mesozoic Sandstone from the Beipiao Basin and Its Implication to Meso-Cenozoic Tectonic Evolution of the Eastern Yan-Liao Orogenic Belt

    Institute of Scientific and Technical Information of China (English)

    YAN Yi; LIN Ge; XIA Bin; LI Zi'an; LI Zhongcheng

    2005-01-01

    Combining the single-grain low-temperature apatite fission track with high-temperature zircon U-Pb dating of sandstone can better reveal the temporal association between the source and depositional site, and identify both the age component of the source terrain and subsequent thermo-tectohic events after deposition. This paper introduces the singlegrain zircon U-Pb dating and fission track (FT) dating of sediments from the Beipiao basin in Northeast China. The U-Pb ages of 18 single zircon grains collected from the early Jurassic Beipiao Formation range from 194.3±2.9 to 233.8±4.2 Ma and most of apatite FI ages are about 30-40 Ma, indicating that the eastern part of the Yan-Liao orogenic belt experienced an obvious tectonic seesawing during Meso-Cenozoic time. The eastern part of Liaoning Province (the Liaodong block)uplifted in the early Mesozoic (230-190 Ma) and formed a geological landscape of high mountains, while the western part of the province (the Liaoxi area) subsided relatively and thousand-meter-scale sediments were deposited. During the Cenozoic (30-40 Ma), the Liaoxi area uplifted as a whole, and the Xialiaohe Basin sank intensively. The topographic landscape had a great change: high mountains in the west and east of Liaoning Province and low plains in the central area.

  16. Cathodoluminescence investigations on quartz cement in the sandstones of Khabour Formation from Iraqi Kurdistan Region, Northern Iraq

    DEFF Research Database (Denmark)

    Omer, Muhamed Fakhri; Friis, Henrik

    2014-01-01

    The Ordovician deltaic to shallow marine Khabour Formation in Northern Iraq consists mainly of sandstone with minor siltstone and interbedded shale. The sandstones are pervasively cemented by quartz that resulted in very little preserved primary porosity. Cathodoluminescence and petrographic stud...

  17. Electrokinetic desalination of sandstones for NaCl removal

    DEFF Research Database (Denmark)

    Ottosen, Lisbeth M.; Christensen, Iben V.

    2012-01-01

    of reliable methods to remove the damaging salts in order to stop the decay. Electrokinetic desalination of fired clay bricks have previously shown efficient in laboratory scale and in the present work the method is tested for desalination of Cotta and Posta sandstones, which both have lower porosity than...... the bricks studied. The stones were contaminated with NaCl by submersion prior to the desalination experiments, where an electric DC field was applied to the stones from electrodes placed in clay poultice. Two poultice types were tested: calcareous clay used brick production and a mixture of kaolinite...... surface) applied. At the end of all desalination experiments the water content in the poultice at the cathode was higher than in the poultice at the anode, revealing electroosmotic water transport. The water profiles in the stones, however, did not indicate electoosmosis as they were quite uniform within...

  18. Diagenesis of Cambrian and lower Carboniferous sandstones, southwest Sinai, Egypt

    Energy Technology Data Exchange (ETDEWEB)

    Abdel-Wahab, A.A.; Salem, A.M.K. [Tanta Univ., Kafr El-Sheikh (Egypt); McBride, E.F. [Univ. of Texas, Austin, TX (United States)

    1996-12-31

    Quartzose and feldspathic Cambrian and Lower Carboniferous sandstones (fluvial > marine > eolian) deposited on the Arabian shield in southwestern Sinai were not buried more than 1 to 1.5 km until Late Cretaceous and younger time, when the deepest rocks reached 2.5 km. Porosity was reduced by compaction to about 26%. Grain rearrangement was the main mechanism of compaction; intergranular pressure solution and ductile grain deformation are insignificant. Cementation by iron oxide (5%), quartz (3%), calcite (2%), kaolinite (2%) and K-feldspar (< 1%) reduced porosity to 12-15% except in silcretes and some ferricretes, where porosity was reduced to non-reservoir quality. Cements have no selectivity for certain textures or stratigraphic positions.

  19. Diagenesis of Cambrian and lower Carboniferous sandstones, southwest Sinai, Egypt

    Energy Technology Data Exchange (ETDEWEB)

    Abdel-Wahab, A.A.; Salem, A.M.K. (Tanta Univ., Kafr El-Sheikh (Egypt)); McBride, E.F. (Univ. of Texas, Austin, TX (United States))

    1996-01-01

    Quartzose and feldspathic Cambrian and Lower Carboniferous sandstones (fluvial > marine > eolian) deposited on the Arabian shield in southwestern Sinai were not buried more than 1 to 1.5 km until Late Cretaceous and younger time, when the deepest rocks reached 2.5 km. Porosity was reduced by compaction to about 26%. Grain rearrangement was the main mechanism of compaction; intergranular pressure solution and ductile grain deformation are insignificant. Cementation by iron oxide (5%), quartz (3%), calcite (2%), kaolinite (2%) and K-feldspar (< 1%) reduced porosity to 12-15% except in silcretes and some ferricretes, where porosity was reduced to non-reservoir quality. Cements have no selectivity for certain textures or stratigraphic positions.

  20. Process-dependent residual trapping of CO2 in sandstone

    Science.gov (United States)

    Zuo, Lin; Benson, Sally M.

    2014-04-01

    This paper demonstrates that the nature and extent of residual CO2 trapping depend on the process by which the CO2 phase is introduced into the rock. We compare residual trapping of CO2 in Berea Sandstone by imbibing water into a core containing either exsolved CO2 or CO2 introduced by drainage. X-ray computed tomography measurements are used to map the spatial distribution of CO2 preimbibition and postimbibition. Unlike during drainage where the CO2 distribution is strongly influenced by the heterogeneity of the rock, the distribution of exsolved CO2 is comparatively uniform. Postimbibition, the CO2 distribution retained the essential features for both the exsolved and drainage cases, but twice as much residual trapping is observed for exsolved CO2 even with similar preimbibition gas saturations. Residually trapped exsolved gas also disproportionately reduced water relative permeability. Development of process-dependent parameterization will help better manage subsurface flow processes and unlock benefits from gas exsolution.

  1. Reservoir characterization of Pennsylvanian Sandstone Reservoirs. Annual report

    Energy Technology Data Exchange (ETDEWEB)

    Kelkar, M.

    1992-09-01

    This annual report describes the progress during the second year of a project on Reservoir Characterization of Pennsylvanian Sandstone Reservoirs. The report is divided into three sections: (i) reservoir description and scale-up procedures; (ii) outcrop investigation; (iii) in-fill drilling potential. The first section describes the methods by which a reservoir can be characterized, can be described in three dimensions, and can be scaled up with respect to its properties, appropriate for simulation purposes. The second section describes the progress on investigation of an outcrop. The outcrop is an analog of Bartlesville Sandstone. We have drilled ten wells behind the outcrop and collected extensive log and core data. The cores have been slabbed, photographed and the several plugs have been taken. In addition, minipermeameter is used to measure permeabilities on the core surface at six inch intervals. The plugs have been analyzed for the permeability and porosity values. The variations in property values will be tied to the geological descriptions as well as the subsurface data collected from the Glen Pool field. The third section discusses the application of geostatistical techniques to infer in-fill well locations. The geostatistical technique used is the simulated annealing technique because of its flexibility. One of the important reservoir data is the production data. Use of production data will allow us to define the reservoir continuities, which may in turn, determine the in-fill well locations. The proposed technique allows us to incorporate some of the production data as constraints in the reservoir descriptions. The technique has been validated by comparing the results with numerical simulations.

  2. Microbial Penetration through Nutrient-Saturated Berea Sandstone.

    Science.gov (United States)

    Jenneman, G E; McInerney, M J; Knapp, R M

    1985-08-01

    Penetration times and penetration rates for a motile Bacillus strain growing in nutrient-saturated Berea sandstone cores were determined. The rate of penetration was essentially independent of permeabilities above 100 mdarcys and rapidly declined for permeabilities below 100 mdarcys. It was found that these penetration rates could be grouped into two statistically distinct classes consisting of rates for permeabilities above 100 mdarcys and rates for those below 100 mdarcys. Instantaneous penetration rates were found to be zero order with respect to core length for cores with permeabilities above 100 mdarcys and first order with respect to core length for cores with permeabilities below 100 mdarcys. The maximum observed penetration rate was 0.47 cm . h, and the slowest was 0.06 cm . h; however, these rates may be underestimates of the true penetration rate, since the observed rates included the time required for growth in the flask as well as the core. The relationship of penetration time to the square of the length of the core suggested that cells penetrated high-permeability cores as a band and low-permeability cores in a diffuse fashion. The motile Enterobacter aerogenes strain penetrated Berea sandstone cores three to eight times faster than did the nonmotile Klebsiella pneumoniae strain when cores of comparable length and permeability were used. A penetration mechanism based entirely on motility predicted penetration times that were in agreement with the observed penetration times for motile strains. The fact that nonmotile strains penetrated the cores suggested that filamentous or unrestricted growth, or both, may also be important.

  3. The Oldest Jurassic Dinosaur: A Basal Neotheropod from the Hettangian of Great Britain.

    Science.gov (United States)

    Martill, David M; Vidovic, Steven U; Howells, Cindy; Nudds, John R

    2016-01-01

    Approximately 40% of a skeleton including cranial and postcranial remains representing a new genus and species of basal neotheropod dinosaur is described. It was collected from fallen blocks from a sea cliff that exposes Late Triassic and Early Jurassic marine and quasi marine strata on the south Wales coast near the city of Cardiff. Matrix comparisons indicate that the specimen is from the lithological Jurassic part of the sequence, below the first occurrence of the index ammonite Psiloceras planorbis and above the last occurrence of the Rhaetian conodont Chirodella verecunda. Associated fauna of echinoderms and bivalves indicate that the specimen had drifted out to sea, presumably from the nearby Welsh Massif and associated islands (St David's Archipelago). Its occurrence close to the base of the Blue Lias Formation (Lower Jurassic, Hettangian) makes it the oldest known Jurassic dinosaur and it represents the first dinosaur skeleton from the Jurassic of Wales. A cladistic analysis indicates basal neotheropodan affinities, but the specimen retains plesiomorphic characters which it shares with Tawa and Daemonosaurus.

  4. The Oldest Jurassic Dinosaur: A Basal Neotheropod from the Hettangian of Great Britain.

    Directory of Open Access Journals (Sweden)

    David M Martill

    Full Text Available Approximately 40% of a skeleton including cranial and postcranial remains representing a new genus and species of basal neotheropod dinosaur is described. It was collected from fallen blocks from a sea cliff that exposes Late Triassic and Early Jurassic marine and quasi marine strata on the south Wales coast near the city of Cardiff. Matrix comparisons indicate that the specimen is from the lithological Jurassic part of the sequence, below the first occurrence of the index ammonite Psiloceras planorbis and above the last occurrence of the Rhaetian conodont Chirodella verecunda. Associated fauna of echinoderms and bivalves indicate that the specimen had drifted out to sea, presumably from the nearby Welsh Massif and associated islands (St David's Archipelago. Its occurrence close to the base of the Blue Lias Formation (Lower Jurassic, Hettangian makes it the oldest known Jurassic dinosaur and it represents the first dinosaur skeleton from the Jurassic of Wales. A cladistic analysis indicates basal neotheropodan affinities, but the specimen retains plesiomorphic characters which it shares with Tawa and Daemonosaurus.

  5. Episodic Jurassic to Lower Cretaceous intraplate compression in Central Patagonia during Gondwana breakup

    Science.gov (United States)

    Navarrete, César; Gianni, Guido; Echaurren, Andrés; Kingler, Federico Lince; Folguera, Andrés

    2016-12-01

    From Lower Jurassic to Lower Cretaceous, several intraplate compression events affected discrete sectors of Central Patagonia, under a general context of crustal extension associated with Gondwana breakup. This was demonstrated by means of 2D and 3D seismic and borehole data, which show partial inversion of Lower and Middle Jurassic extensional structures of the Chubut and Cañadón Asfalto basins, during the earliest stages of breakup. A comparison with surrounding areas in Patagonia, where similar Jurassic intraplate compression was described, allowed the discrimination of three discrete pulses of subtle compression (C1: ∼188-185 Ma; C2: ∼170-163; C3: ∼157-136? Ma). Interestingly, episodic intraplate compressional events are closely followed by high flux magmatic events linked to the westward expansion of the Karoo-Ferrar thermal anomaly, which impacted on the lithosphere of southwest Gondwana in Lower Jurassic. In addition, we determined the approximate direction of the main compressive strain (σ1) compatible with other Jurassic intraplate belts of South America. These observations led us to propose a linkage between a thermo mechanically weakened continental crust due to LIPs activity, changes in plate motions and ridge-push forces generated by the opening of the Weddell Sea, in order to explain intraplate shortening, interrupted while Karoo LIPs magmatic invigoration took place.

  6. Palinspastic reconstruction and geological evolution of Jurassic basins in Mongolia and neighboring China

    Directory of Open Access Journals (Sweden)

    Wu Genyao

    2013-07-01

    Full Text Available The important event in Jurassic tectonics in Mongolia was the subduction and closure of the Mongolia-Okhotsk ocean; correspondingly, basin evolution can be divided into two main stages, related to the orogeny and collapse of the orogenic belt, respectively. The developing of Early–Middle Jurassic basins to the north of the ocean resulted from back-arc extension. The fossil sutures, from the China–SE Asia sub-continent to the south of the ocean, were rejuvenated by subduction-related orogeny; in addition, the Yanshanian intra-continental movement occurred. Three Early–Middle Jurassic molasse basins were developed by movement in Inner Mongolia, all of which stretched westwards (or northwards into Mongolia; therefore, the molasse basins in eastern and southern Mongolia had the same geometric and kinematic features as the basins in the Inner Mongolia. Owing to the collapse of the Mongolia-Okhotsk orogenic belt, a group of rift basins developed during the Late Jurassic. In eastern Mongolia, the NE orientated extensional basins were controlled by the neogenic NE-structure. The contemporary basins in southern Mongolia and the neighboring areas in China were constrained by remobilization (inherited activation of the latitudinal or ENE-directional basement structures. Three stages can be recognized in the evolution of the Early–Middle Jurassic basins after reversal; the basins also experienced four episodes of reformation.

  7. Mineralogy and geochemistry of the Jurassic coals from the Gheshlagh mine, Eastern Alborz

    Directory of Open Access Journals (Sweden)

    Gholam Hossein Shamanian

    2015-10-01

    Full Text Available Introduction The Alborz structural zone in northern Iran is the host of a number of important coal deposits. The Gheshlagh coal mine is one of them, which is located 35 km southeast of Azadshahr. Coal bearing strata in the Gheshlagh mining district occur in the middle part of the Lower Jurassic Shemshak Formation which consists mainly of shales, siltstones and sandstones. The Geshlagh coals have a low sulfur content and a low ash yield. The ash content of coal and its geochemical character depends on the environment of deposition and subsequent geological history (Yazdi and Esmaeilnia, 2004. The purpose of this study was to investigate the texural and mineralogical characteristcs of the Ghashlagh coals and to identify the geochemistry of the major and trace elements and their relationship to specific mineralogical components. These results are necessary to improve the understanding of coal characterization and to relate the mineralogy of different materials to their potential for producing acidic or alkaline mine waters associated with mining and preparation processes. Materials and methods About 20 samples were collected from the main coal seams. These samples were taken from fresh faces of the mine to avoid weathered surfaces and get fresh samples. The petrography of the samples was carried out by the conventional microscopic methods at the Golestan University. Mineralogical analyses were done by a X-ray diffractometer equipped with a CuKα tube and monochrometer (XRD Philips PW 1800 at the Kansaran Binaloud Company. The coal samples were initially crushed to less than 200 μm and homogenized. Then, 50 g from each sample was heated to 525 oC according to the United States Geological Survey procedure(Bullock et al., 2002. The concentration of the major and trace elements in the resulting ash samples was determined using a wavelength Xray fluorescence spectrometer (XRF Philips PW1480 at the Kansaran Binaloud Company. Results The Coal

  8. Early Jurassic allotherians from South Wales (United Kingdom

    Directory of Open Access Journals (Sweden)

    W. A. Clemens

    2007-02-01

    Full Text Available Fossils from two fissure fillings in Pant Quarry (designated Pant 4 and Pant 5, South Wales, United Kingdom, probably of Early Jurassic age document a taxonomically diverse vertebrate fauna, the Morganucodon-sphenodont fauna, composed of several kinds of reptiles, non-mammalian synapsids, and mammals. Six isolated molariform teeth from Pant 4 and 5 fissures clearly record the presence of Thomasia (Mammalia, Allotheria, Haramiyidae, a genus previously known only from purported Late Triassic faunas of southwestern England, France, Belgium, Luxemburg, Germany, and Switzerland. Small morphological differences from teeth in the larger English and continental European samples warrant identification of the Welsh material as Thomasia cf. moorei. The highly derived morphology of an isolated molariform tooth from Pant 5 fissure indicates the presence of another, possibly allotherian, taxon. Fossilien aus zwei wahrscheinlich unterjurassischen Spaltenfüllungen (Pant 4 und Pant 5 im Steinbruch Pant in Süd-Wales dokumentieren eine taxonomisch diverse Wirbeltierfauna. Diese Morganucodon-Sphenodontiden-Fauna besteht aus verschiedenen Formen von Reptilien, Synapsiden und Säugetieren. Sechs isolierte molariforme Zähne aus den Spaltenfüllungen Pant 4 und Pant 5 belegen eindeutig das Vorkommen von Thomasia (Mammalia, Allotheria, Haramiyidae, einer bisher nur aus vermutlich obertriassischen Faunen Südwest-Englands, Frankreichs, Belgiens, Luxemburgs, Deutschlands und der Schweiz bekannten Gattung. Geringe morphologische Unterschiede zu dem umfangreicheren Material aus England und Kontinental-Europa sprechen für die Identifikation des neuen Materials als Thomasia cf. moorei. Die stark abgeleitete Morphologie eines isolierten molariformen Zahnes aus der Spalte Pant 5 belegt das Vorkommen eines anderen Taxons, das möglicherweise auch den Allotheria zuzuordnen ist. doi:10.1002/mmng.200600018

  9. The Jurassic of Denmark and Greenland: Early and Middle Jurassic mires of Bornholm and the Fennoscandian Border Zone: a comparison of depositional environments and vegetation

    Directory of Open Access Journals (Sweden)

    Koppelhus, Eva B.

    2003-10-01

    Full Text Available Suitable climatic conditions for peat formation existed during Early–Middle Jurassic times in the Fennoscandian Border Zone. Autochthonous peat and allochthonous organic matter were depositedfrom north Jylland, south-east through the Kattegat and Øresund area, to Skåne and Bornholm. The increase in coal seam abundance and thickness from north Jylland to Bornholm indicates that the most favourable peat-forming conditions were present towards the south-east. Peat formation and deposition of organic-rich muds in the Early Jurassic coastal mires were mainly controlled by a continuous rise of relative sea level governed by subsidence and an overall eustatic rise. Watertable rise repeatedly outpaced the rate of accumulation of organic matter and terminated peat formationby lacustrine or lagoonal flooding. Organic matter accumulated in open-water mires and in continuously waterlogged, anoxic and periodically marine-influenced mires. The latter conditionsresulted in huminite-rich coals containing framboidal pyrite. The investigated Lower Jurassic seams correspond to peat and peaty mud deposits that ranged from 0.5–5.7 m in thickness, but were generallyless than 3 m thick. It is estimated that on Bornholm, the mires existed on average for c. 1200 years in the Hettangian–Sinemurian and for c. 2300 years in the Late Pliensbachian; the Early Jurassic(Hettangian–Sinemurian mires in the Øresund area existed for c. 1850 years. Aalenian uplift of the Ringkøbing–Fyn High and major parts of the Danish Basin caused a significant change in the basinconfiguration and much reduced subsidence in the Fennoscandian Border Zone during the Middle Jurassic. This resulted in a more inland position for the Middle Jurassic mires which on occasionenabled peat accumulation to keep pace with, or temporarily outpace, watertable rise. Thus, peat formation was sometimes sustained for relatively long periods, and the mires may have existed for up to 7000 years in the

  10. Reservoir assessment of the Nubian sandstone reservoir in South Central Gulf of Suez, Egypt

    Science.gov (United States)

    El-Gendy, Nader; Barakat, Moataz; Abdallah, Hamed

    2017-05-01

    The Gulf of Suez is considered as one of the most important petroleum provinces in Egypt and contains the Saqqara and Edfu oil fields located in the South Central portion of the Gulf of Suez. The Nubian sandstone reservoir in the Gulf of Suez basin is well known for its great capability to store and produce large volumes of hydrocarbons. The Nubian sandstone overlies basement rocks throughout most of the Gulf of Suez region. It consists of a sequence of sandstones and shales of Paleozoic to Cretaceous age. The Nubian sandstone intersected in most wells has excellent reservoir characteristics. Its porosity is controlled by sedimentation style and diagenesis. The cementation materials are mainly kaolinite and quartz overgrowths. The permeability of the Nubian sandstone is mainly controlled by grain size, sorting, porosity and clay content especially kaolinite and decreases with increase of kaolinite. The permeability of the Nubian Sandstone is evaluated using the Nuclear Magnetic Resonance (NMR technology) and formation pressure data in addition to the conventional logs and the results were calibrated using core data. In this work, the Nubian sandstone was investigated and evaluated using complete suites of conventional and advanced logging techniques to understand its reservoir characteristics which have impact on economics of oil recovery. The Nubian reservoir has a complicated wettability nature which affects the petrophysical evaluation and reservoir productivity. So, understanding the reservoir wettability is very important for managing well performance, productivity and oil recovery.

  11. Quantitative studies of hydrocarbon loss of the Silurian bitumen sandstone in the Tarim Basin

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The evolution of Tarim Basin experienced several tectonic movements,of which Caledonian movement caused a serious damage to reservoirs of Silurian. The earlier reservoirs size and the later hydrocarbon loss are two key factors to exploration prospect of Silurian. On the basis of net thickness of bituminous sandstone and recovery coefficient of crude oil converting to bitumen,the scale of the hydrocarbon loss of palaeo-accumulation in bitumen sandstone of Silurian was calculated (86.30×108t). The deter-mination of net thickness of bitumen sandstone was completed mainly by several methods,such as physical property demarcation,observing lithology,grains with oil inclusion (GOI) technology,and quantitative grains fluorescence (QGF) technology. The samples of black sandstone and white sand-stone were collected and compared by means of the methods mentioned above. The results showed that there was little hydrocarbon,or none,in the white sandstone. The recovery coefficient was ob-tained by the analyses of plentiful physical parameters of crude oil and bitumen sandstone,based on the hypothesis that nonhydrocarbon compounds and bitumen were invariable in the process of bitu-men forming. The calculated result,which is more scientific and actual,indicates the exploration pros-pect is more promising in Silurian of the Tarim Basin.

  12. The First Stegosaur (Dinosauria, Ornithischia) from the Upper Jurassic Shishugou Formation of Xinjiang, China

    Institute of Scientific and Technical Information of China (English)

    JIA Chengkai; Catherine A. FOSTER; XU Xing; James M. CLARK

    2007-01-01

    A new stegosaur species, Jiangjunosaurus junggarensis, gen. et sp. nov., is erected based on a specimen collected from the Upper Jurassic upper section of the Shishugou Formation in the Junggar Basin, Xinjiang, China. It represents the first stegosaur from the Jurassic of Xinjiang and increases the diversity of the dinosaur fauna in the Shishugou Formation. The new genus is characterized by symmetrical and proportionally wide tooth crowns, a sub-rectangular axial neural spine seen in lateral view, and large openings on the lateral surfaces of the cervical centra. A preliminary character analysis suggests that this new taxon is more derived than the Middle Jurassic stegosaur Huayangosaurus but more primitive than most other known stegosaur species.

  13. A New Sauropod, Gongxianosaurus, from the Lower Jurassic of Sichuan, China

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The paper describes an early and primitive sauropod dinosaur, Gongxianosaurus shibeiensis (gen. et sp. nov.), from the Dongyuemiao Member of the Lower Jurassic Ziliujing Formation in Shibei Township, Gongxian County, Sichuan Province, China, which is one of the 5 dinosaur fossils discovered in Gongxian in 1997. Except the skull which is incomplete, the fossils are well preserved. It has some features of both sauropods and prosauropods. It is an intermediate type in the evolution of dinosaurs from prosauropods to sauropods and provides materials for the study of the origin and evolution of the sauropod dinosaur fauna. The discovery of this new sauropod furnishes a way for the stratigraphic correlation between the Early Jurassic Ziliujing Formation in the Sichuan basin and the Lower Jurassic Lufeng Formation in the Central Yunnan basin.

  14. Three new species of mesosciophilid gnats from the Middle-Late Jurassic of China (insecta: Diptera: Nematocera: Mesosciophilidae).

    Science.gov (United States)

    Zhang, J F

    2008-11-15

    Three extinct new species from the Callovian or Oxfordian (uppermost Middle Jurassic or lowermost Upper Jurassic) Daohugou beds in Inner Mongolia, China is described as Mesosciophila abstracta sp. n., Mesosciophilodes synchrona sp. n. and Paramesosciophilodes eximia sp. n. (Family Mesosciophilidae). All the records of mesosciophilid gnats are briefly reviewed.

  15. First American record of the Jurassic ichnogenus Deltapodus and a review of the fossil record of stegosaurian footprints

    DEFF Research Database (Denmark)

    Milàn, Jesper; Chiappe, Luis M

    2009-01-01

    of a well-preserved pes track and the eroded remains of a manus track. Previously, Deltapodus was known only from the Middle Jurassic Yorkshire coast of England and the Upper Jurassic of Portugal and Spain. The new discovery thus substantially extends the geographic record of this ichnospecies...

  16. Acoustic emission signals frequency-amplitude characteristics of sandstone after thermal treated under uniaxial compression

    Science.gov (United States)

    Kong, Biao; Wang, Enyuan; Li, Zenghua; Wang, Xiaoran; Niu, Yue; Kong, Xiangguo

    2017-01-01

    Thermally treated sandstone deformation and fracture produced abundant acoustic emission (AE) signals. The AE signals waveform contained plentiful precursor information of sandstone deformation and fracture behavior. In this paper, uniaxial compression tests of sandstone after different temperature treatments were conducted, the frequency-amplitude characteristics of AE signals were studied, and the main frequency distribution at different stress level was analyzed. The AE signals frequency-amplitude characteristics had great difference after different high temperature treatment. Significant differences existed of the main frequency distribution of AE signals during thermal treated sandstone deformation and fracture. The main frequency band of the largest waveforms proportion was not unchanged after different high temperature treatments. High temperature caused thermal damage to the sandstone, and sandstone deformation and fracture was obvious than the room temperature. The number of AE signals was larger than the room temperature during the initial loading stage. The low frequency AE signals had bigger proportion when the stress was 0.1, and the maximum value of the low frequency amplitude was larger than high frequency signals. With the increase of stress, the low and high frequency AE signals were gradually increase, which indicated that different scales ruptures were broken in sandstone. After high temperature treatment, the number of high frequency AE signals was significantly bigger than the low frequency AE signals during the latter loading stage, this indicates that the small scale rupture rate of recurrence and frequency were more than large scale rupture. The AE ratio reached the maximum during the sandstone instability failure period, and large scale rupture was dominated in the failure process. AE amplitude increase as the loading increases, the deformation and fracture of sandstone was increased gradually. By comparison, the value of the low frequency

  17. Fracturing and Damage to Sandstone Under Coupling Effects of Chemical Corrosion and Freeze-Thaw Cycles

    Science.gov (United States)

    Han, Tielin; Shi, Junping; Cao, Xiaoshan

    2016-11-01

    Rapid freeze-thaw (FT) cycles were adopted to explore the damage deterioration mechanism and mechanical properties of sandstone specimens under the coupling effects of different chemical solutions and FT cycles. The variation regularities of the FT cycles and physical and mechanical properties of sandstone specimens immersed in different chemical solutions were analyzed by using sandstone sampled from a Chinese riverbank slope. The damage variable based on porosity variation was used in the quantitative analysis of the damage to the sandstone under the coupling effects of chemical corrosion and FT cycles. Experimental results showed that the sandstone specimens weakened substantially under those effects. Their fracture toughness K IC, splitting tensile strength, and compressive strength showed a similar deteriorating trend with various numbers of FT cycles. However, a difference exists in the deterioration degree of their mechanical parameters, i.e., the deterioration degree of their fracture toughness K IC is the greatest followed by that of splitting tensile strength, and that of compressive strength is relatively small. Strong acid solutions may aggravate the deterioration of FT damage in sandstones, but at the early stage of the experiment, strong alkaline solutions inhibited sandstone damage deterioration. However, the inhibiting effect disappeared when the number of FT cycles exceeded 25. The different chemical solutions had a different effect on the FT damage degree of the sandstone specimens; for example, SO4 2- ions had a greater effect on FT damage than did HCO3 - ions. Water-chemical solutions and FT cycles promote each other in deteriorating rocks and simultaneously affect the damage deterioration degree of sandstones.

  18. Critical review of research on the Lower Jurassic flora of Poland

    Directory of Open Access Journals (Sweden)

    Pacyna Grzegorz

    2013-12-01

    Full Text Available The Lower Jurassic plant macrofossils of Poland are poorly known. Relatively rich sources of fossils are found in only a few outcrops in the Holy Cross Mountains. Other described plant remains come from drill cores taken from most areas of Poland, but as a rule these are single specimens. The only professional descriptions of Lower Jurassic macroflora are papers by Raciborski, Makarewiczówna, and a team of researchers consisting of Reymanówna, Barbacka, Ziaja, and Wcisło-Luraniec. Raciborski’s fossil collection is still available for research and revision. Such work is in progress. The collection described by Makarewiczówna contained many interesting specimens but unfortunately the majority of them are now missing. Stratigraphic research by geologists has provided some new specimens from drill cores and outcrops in the Holy Cross Mountains but these have not been subjected to detailed palaeobotanical analysis. The palynology of the Lower Jurassic was focused on biostratigraphy from the outset of that research. As an outcome it provided spore-pollen and megaspore zonations for Lower Jurassic strata in Poland. The Polish Lower Jurassic flora is comprised of ferns (very numerous, lycopsids, sphenopsids, cycadaleans, bennettitaleans, gnetaleans, ginkgoaleans, and conifers. This flora is taxonomically poorer than the equally old and geographically close floras of Denmark, Sweden, and Germany. Macrofloristic data have been used by geologists as an important source of information for assessing the age of Lower Jurassic formations, particularly in the Holy Cross Mountains. Hence the need for the old collections to be taxonomically revised and for new material from outcrops and drill cores to be examined and described.

  19. Facies architecture of the Bluejacket Sandstone in the Eufaula Lake area, Oklahoma: Implications for the reservoir characterization of the Bartlesville Sandstone

    Energy Technology Data Exchange (ETDEWEB)

    Ye, Liangmiao; Yang, Kexian [Univ. of Tulsa, OK (United States)

    1997-08-01

    Outcrop studies of the Bluejacket Sandstone (Middle Pennsylvanian) provide significant insights to reservoir architecture of the subsurface equivalent Bartlesville Sandstone. Quarry walls and road cuts in the Lake Eufaula area offer excellent exposures for detailed facies architectural investigations using high-precision surveying, photo mosaics. Directional minipermeameter measurements are being conducted. Subsurface studies include conventional logs, borehole image log, and core data. Reservoir architectures are reconstructed in four hierarchical levels: multi-storey sandstone, i.e. discrete genetic intervals; individual discrete genetic interval; facies within a discrete genetic interval; and lateral accretion bar deposits. In both outcrop and subsurface, the Bluejacket (Bartlesville) Sandstone comprises two distinctive architectures: a lower braided fluvial and an upper meandering fluvial. Braided fluvial deposits are typically 30 to 80 ft thick, and are laterally persistent filling an incised valley wider than the largest producing fields. The lower contact is irregular with local relief of 50 ft. The braided-fluvial deposits consist of 100-400-ft wide, 5-15-ft thick channel-fill elements. Each channel-fill interval is limited laterally by an erosional contact or overbank deposits, and is separated vertically by discontinuous mudstones or highly concentrated mudstone interclast lag conglomerates. Low-angle parallel-stratified or trough cross-stratified medium- to coarse-grained sandstones volumetrically dominate. This section has a blocky well log profile. Meandering fluvial deposits are typically 100 to 150 ft thick and comprise multiple discrete genetic intervals.

  20. Provenance and weathering depth of carbonaceous gotland sandstone by use of carbon and oxygen isotopes

    Science.gov (United States)

    Åberg, G.; Löfvendahl, R.; Stijfhoorn, D.; Råheim, A.

    Carbon and oxygen isotope ratios of carbonates (calcite) from different sites and stratigraphic levels of the Gotland sandstone show that it might be possible to fingerprint the different quarries. Preliminary tests of nine samples of Gotland sandstone from different buildings show that the laser microprobe is an excellent tool for estimating depth of weathering on this carbonaceous sandstone. Analyses perpendicular to the stone surface gave a similar trend for the carbon and oxygen isotope ratios, although changes go deeper with δ13C than δ18O. Depth of weathering is controlled by exposure, location, biologic overgrowth and salt efflorescence. The effect of earlier conservation treatment with linseed oil can also be traced.

  1. A basal alvarezsauroid theropod from the early Late Jurassic of Xinjiang, China.

    Science.gov (United States)

    Choiniere, Jonah N; Xu, Xing; Clark, James M; Forster, Catherine A; Guo, Yu; Han, Fenglu

    2010-01-29

    The fossil record of Jurassic theropod dinosaurs closely related to birds remains poor. A new theropod from the earliest Late Jurassic of western China represents the earliest diverging member of the enigmatic theropod group Alvarezsauroidea and confirms that this group is a basal member of Maniraptora, the clade containing birds and their closest theropod relatives. It extends the fossil record of Alvarezsauroidea by 63 million years and provides evidence for maniraptorans earlier in the fossil record than Archaeopteryx. The new taxon confirms extreme morphological convergence between birds and derived alvarezsauroids and illuminates incipient stages of the highly modified alvarezsaurid forelimb.

  2. Jurassic Lake T'oo'dichi': a large alkaline, saline lake, Morrison Formation, eastern Colorado Plateau

    Science.gov (United States)

    Turner, C.E.; Fishman, N.S.

    1991-01-01

    Recognition of alkaline, saline-lake deposits in the Morrison Formation significantly alters interpretations of depositional environments of this formation, and it also has important implications for paleoclimatic interpretation. Late Jurassic climate was apparently much more arid than had previously been thought. In fact, sedimentologic evidence suggests that the lake basin was typically dry for extended periods and enjoyed only brief wet intervals. This conclusion has important consequences for environmental interpretation of the habitat that was favorable for large herbivorous dinosaurs, which thrived in the Late Jurassic. -from Authors

  3. Androecium of Archaefructus, the Late Jurassic Angiosperms from Western Liaoning, China

    Institute of Scientific and Technical Information of China (English)

    SUN Ge; ZHENG Shaolin; SUN Chunlin; SUN Yuewu; David L. DILCHER; MIAO Yuyan

    2002-01-01

    Androecium of the earliest known flowering plant Archaefructus liaoningensis was found from the Upper Jurassic Jianshangou Formation of western Liaoning, China. The androecium consists of numerous stamens bearing in pair on the reproductive axes below conduplicate carpels. The stamens are composed of a short filament and basifixed anther for each. Monosulcate pollen in situ are found from the anthers. The characters of the androecium reveals that Archaefructus are probably protandrous, and the paired stamens and monosulcate pollen appear to indicate that Archaefructus, as primitive angiosperms,might be derived from extinct seed -ferns during the Older Mesozoic. Archaefructus is considered Late Jurassic in age.

  4. Early and Middle Jurassic climate changes: implications for palaeoceanography and tectonics

    DEFF Research Database (Denmark)

    Korte, Christoph; Hesselbo, Stephen; Ullmann, Clemens Vinzenz;

    2014-01-01

    three pronounced oxygen isotope ‘Ice Age’ cycles, and the subsequent well known Toarcian Oceanic Anoxic ‘supergreenhouse’ Event is followed by very warm seawater temperatures in the late Toarcian. Moreover, a very pronounced and effective cooling occurred during the latest Toarcian and early Aalenian...... (Early-Middle Jurassic Boundary Event) resulted in substantial expansion of Arctic climates to palaeolatitudes as low as 45° and in distinctly cooler seawater temperatures in lower latitude European seas. At least the extensive cooling at the Early-Middle Jurassic Boundary Event was most likely driven...

  5. Earliest evolution of multituberculate mammals revealed by a new Jurassic fossil.

    Science.gov (United States)

    Yuan, Chong-Xi; Ji, Qiang; Meng, Qing-Jin; Tabrum, Alan R; Luo, Zhe-Xi

    2013-08-16

    Multituberculates were successful herbivorous mammals and were more diverse and numerically abundant than any other mammal groups in Mesozoic ecosystems. The clade also developed diverse locomotor adaptations in the Cretaceous and Paleogene. We report a new fossil skeleton from the Late Jurassic of China that belongs to the basalmost multituberculate family. Dental features of this new Jurassic multituberculate show omnivorous adaptation, and its well-preserved skeleton sheds light on ancestral skeletal features of all multituberculates, especially the highly mobile joints of the ankle, crucial for later evolutionary success of multituberculates in the Cretaceous and Paleogene.

  6. Fluid migration through sandstone fractures in Gale Crater, Mars

    Science.gov (United States)

    Yen, Albert; Blake, David; Bristow, Thomas; Chipera, Steve; Downs, Robert; Gellert, Ralf; Grotzinger, John P.; Ming, Doug; Morris, Richard; Morrison, Shaunna; Rampe, Liz; Thompson, Lucy; Treiman, Allan; Vaniman, David; MSL Science Team

    2016-10-01

    The Curiosity Mars rover encountered numerous occurrences of light-toned fractures in lithified sediments along its traverse in Gale Crater. These alteration zones can be traced for tens of meters across the landscape and are generally less than a meter in width. Two of these features were investigated in detail by the rover instruments, including drilling to acquire samples both within and immediately outside the lighter-toned areas.The chemical composition established by the Alpha Particle X-ray Spectrometer (APXS) on the arm of the rover shows that the alteration zones are significantly enhanced in silica (40% increase) and sulfur (factor of ~5) relative to the surrounding rocks. Concentrations of Fe, Mg, Al, Mn, Ni and Zn are reduced by a factor of two or more. The correlation between Ca and SO3 indicates the presence of Ca-sulfates, but with up to 15% SO3 (and only 6% to 9% CaO) in the APXS data, the presence of Mg and Fe sulfates in the altered fractures is likely.The Chemistry and Mineralogy (CheMin) X-ray diffraction instrument analyzed the drill fines and found mostly plagioclase feldspar, pyroxenes and magnetite in the unaltered sandstones. X-ray amorphous material and minor hematite and Ca-sulfates are also present. Samples from the alteration zones, however, show a factor of two decrease in the pyroxene to feldspar ratio, abundant Ca-sulfates in various hydration states, and a majority fraction of amorphous material rich in silica and mixed-cation sulfates.The direct comparison of samples within and adjacent to the light toned fractures indicates an alteration process involving the dissolution of pyroxenes and removal of metal cations. The mobility of Al and the likely presence of Fe-sulfates suggest alteration in an acidic environment, but additional moderate pH episodes cannot be ruled out. These features post-date the sandstone lithification and are among the youngest fluid events studied thus far in Gale Crater.

  7. Temperature dependent elasticity and damping in dehydrated sandstone

    Science.gov (United States)

    Darling, T. W.; Struble, W.

    2013-12-01

    Work reported previously at this conference, outlining our observation of anomalously large elastic softening and damping in dehydrated Berea sandstone at elevated temperatures, has been analysed to study shear and compressional effects separately. Modeling of the sample using COMSOL software was necessary to identify modes, as the vibration spectrum of the sample is poorly approximated by a uniform isotropic solid. The first torsional mode of our evacuated, dry, core softens at nearly twice the rate of Young's modulus modes (bending and compressional) and is also damped nearly twice as strongly as temperature increases. We consider two possible models for explaining this behavior, based on the assumption that the mechanical properties of the sandstone are dominated by the framework of quartz grains and polycrystalline cementation, neglecting initially the effects of clay and feldspar inclusions. The 20cm x 2.54cm diameter core is dry such that the pressure of water vapor in the experiment chamber is below 1e-6 Torr at 70C, suggesting that surface water beyond a small number of monolayers is negligible. Our models consider (1) enhanced sliding of grain boundaries in the cementation at elevated temperature and reduced internal water content, and (2) strain microcracking of the cementatioin at low water content due to anisotropic expansion in the quartz grains. In model (1) interfaces parallel to polyhedral grain surfaces were placed in the cement bonds and assigned frictional properties. Model (2) has not yet been implemented. The overall elasticity of a 3-D several-grain model network was determined by modeling quasistatic loading and measuring displacements. Initial results with a small number of grains/bonds suggests that only the first model provides softening and damping for all the modes, however the details of the effects of defect motioin at individual interfaces as the source for the frictional properties is still being evaluated. Nonlinear effects are

  8. The palaeogeography of Sundaland and Wallacea since the Late Jurassic

    Directory of Open Access Journals (Sweden)

    Robert Hall

    2013-08-01

    Full Text Available The continental core of Southeast (SE Asia, Sundaland, was assembled from Gondwana fragments by the Early Mesozoic. Continental blocks rifted from Australia in the Jurassic [South West (SW Borneo, East Java-West Sulawesi-Sumba], and the Woyla intraoceanic arc of Sumatra, were added to Sundaland in the Cretaceous. These fragments probably included emergent areas and could have carried a terrestrial flora and fauna. Sarawak, the offshore Luconia-Dangerous Grounds areas, and Palawan include Asian continental material. These probably represent a wide accretionary zone at the Asia-Pacific boundary, which was an active continental margin until the mid Cretaceous. Subduction ceased around Sundaland in the Late Cretaceous, and from about 80 Ma most of Sundaland was emergent, physically connected to Asia, but separated by deep oceans from India and Australia. India moved rapidly north during the Late Cretaceous and Early Cenozoic but there is no evidence that it made contact with SE Asia prior to collision with Asia. One or more arc-India collisions during the Eocene may have preceded India-Asia collision. The arcs could have provided dispersal pathways from India into SE Asia before final suturing of the two continents. During the Late Cretaceous and Early Cenozoic there was no significant subduction beneath Sumatra, Java and Borneo. At about 45 Ma Australia began to move north, subduction resumed and there was widespread rifting within Sundaland. During the Paleogene east and north Borneo were largely submerged, the Makassar Straits became a wide marine barrier within Sundaland, and West Sulawesi was separated from Sundaland but included land. By the Early Miocene the proto-South China Sea had been eliminated by subduction leading to emergence of land in central Borneo, Sabah and Palawan. Australia-SE Asia collision began, eliminating the former deep ocean separating the two continents, and forming the region now known as Wallacea. The microplate or

  9. Polar record of Early Jurassic massive carbon injection

    Science.gov (United States)

    Suan, Guillaume; Nikitenko, Boris L.; Rogov, Mikhail A.; Baudin, François; Spangenberg, Jorge E.; Knyazev, Valeriy G.; Glinskikh, Larisa A.; Goryacheva, Anna A.; Adatte, Thierry; Riding, James B.; Föllmi, Karl B.; Pittet, Bernard; Mattioli, Emanuela; Lécuyer, Christophe

    2011-12-01

    The Toarcian Oceanic Anoxic Event (T-OAE) (ca. 182 Myr, Early Jurassic) represents one of the best-recognized examples of greenhouse warming, decreased seawater oxygenation and mass extinction. The leading hypothesis to explain these changes is the massive injection of thermogenic or gas hydrate-derived 13C-depleted carbon into the atmosphere, resulting in a > 3 per mil negative carbon isotope excursion (CIE), accelerated nutrient input and dissolved oxygen consumption in the oceans. Nevertheless, the lack of a precisely dated record of the T-OAE outside low latitudes has led to considerable debate about both its temporal and spatial extent and hence concerning its underlying causes. Here we present new isotopic and lithological data from three precisely dated N Siberian sections, which demonstrate that mass extinction and onset of strong oxygen-deficiency occurred near synchronously in polar and most tropical sites and were intimately linked to the onset of a marked 6‰ negative CIE recorded by bulk organic carbon. Rock Eval pyrolysis data from Siberia and comparisons with low latitudes show that the CIE cannot be explained by the extent of stratification of the studied basins or changes in organic matter sourcing and suggest that the negative CIE reflects rapid 13C-depleted carbon injection to all exchangeable reservoirs. Sedimentological and palynological indicators show that the injection coincided with a change from cold (abundant glendonites and exotic boulder-sized clasts) to exceptionally warm conditions (dominance of the thermophyllic pollen genus Classopollis) in the Arctic, which likely triggered a rapid, possibly partly glacioeustatic sea-level rise. Comparisons with low latitude records reveal that warm climate conditions and poor marine oxygenation persisted in continental margins at least 600 kyr after the CIE, features that can be attributed to protracted and massive volcanic carbon dioxide degassing. Our data reveal that the T-OAE profoundly

  10. Evidence of multi-stage faulting by clay mineral analysis: Example in a normal fault zone affecting arkosic sandstones (Annot sandstones)

    Science.gov (United States)

    Buatier, Martine D.; Cavailhes, Thibault; Charpentier, Delphine; Lerat, Jérémy; Sizun, Jean Pierre; Labaume, Pierre; Gout, Claude

    2015-06-01

    Fault affecting silicoclastic sediments are commonly enriched in clay minerals. Clays are sensitive to fluid-rock interactions and deformation mechanisms; in this paper, they are used as proxy for fault activity and behavior. The present study focuses on clay mineral assemblages from the Point Vert normal fault zone located in the Annot sandstones, a Priabonian-Rupelian turbidite succession of the Alpine foredeep in SE France. In this area, the Annot sandstones were buried around 6-8 km below the front of Alpine nappes soon after their deposition and exhumed during the middle-late Miocene. The fault affects arkosic sandstone beds alternating with pelitic layers, and displays throw of about thirty meters. The fault core zone comprises intensely foliated sandstones bounding a corridor of gouge about 20 cm thick. The foliated sandstones display clay concentration along S-C structures characterized by dissolution of K-feldspar and their replacement by mica, associated with quartz pressure solution, intense microfracturation and quartz vein precipitation. The gouge is formed by a clayey matrix containing fragments of foliated sandstones and pelites. However, a detailed petrographical investigation suggests complex polyphase deformation processes. Optical and SEM observations show that the clay minerals fraction of all studied rocks (pelites and sandstones from the damage and core zones of the fault) is dominated by white micas and chlorite. These minerals have two different origins: detrital and newly-formed. Detrital micas are identified by their larger shape and their chemical composition with a lower Fe-Mg content than the newly-formed white micas. In the foliated sandstones, newly-formed white micas are concentrated along S-C structures or replace K-feldspar. Both types of newly formed micas display the same chemical composition confirmed microstructural observations suggesting that they formed in the same conditions. They have the following structural formulas: Na0

  11. Rice Lake National Wildlife Refuge : Sandstone Unit : Mille Lacs National Wildlife Refuge : Fiscal year 2002

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This annual narrative report for Rice Lake (including the Sandstone Unit) and Mille Lacs National Wildlife Refuges outlines Refuge accomplishments during the 2002...

  12. Investigating the effect of unloading on artificial sandstone behaviour using the Discrete Element Method

    Science.gov (United States)

    Huang, Yueqin; Cheng, Yi Pik; Coop, Matthew

    2017-06-01

    The Discrete Element Method (DEM) was used to simulate the mechanical behaviour of a reservoir sandstone. Triaxial tests were carried out using 3D-DEM to simulate the stress-strain behaviour of a sandstone with comparisons made between the numerical tests and the laboratory tests. The influence of isotropic unloading was investigated, which was found to have impacts on bond breakages and was successfully captured in the 3D shearing processes. It was found that bond breakages correlated strongly with the stress-strain behaviour of the sandstone affecting the peak strength. It was also found that unloading affected the bond breakages, which then changed the mechanical behaviour of sandstone. The tangent stiffnesses of simulated virgin and cored samples under different confining stresses were compared. From the tangent stiffnesses, gross yield envelopes and the yielding surfaces for unloaded samples and virgin samples were plotted and analysed in detail.

  13. Rice Lake National Wildlife Refuge : Mille Lacs National Wildlife Refuge : Sandstone Unit : Fiscal year 2003

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This annual narrative report for Rice Lake (including the Sandstone Unit) and Mille Lacs National Wildlife Refuges outlines Refuge accomplishments during the 2003...

  14. Rice Lake National Wildlife Refuge : Mille Lacs National Wildlife Refuge : Sandstone Unit : Fiscal year 2004

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This annual narrative report for Rice Lake (including the Sandstone Unit) and Mille Lacs National Wildlife Refuges outlines Refuge accomplishments during the 2004...

  15. NUMERICAL MODELLING OF PROGRESSIVE FAILURE IN PARTICULATE COMPOSITES LIKE SANDSTONE

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    The beam-particle model is presented for analyzing the progressive failure of particulate composites such as sandstone and concrete. In the model, the medium is schematized as an assembly of particles which are linked through a network of brittle-breaking beam elements. The mechanical behaviour of particle elements is governed by the distinct element method and finite element method. The propagation of the cracking process in particulate composites is mimicked by removing the beam element from the mesh as soon as the stress in the beam exceeds the strength assigned to that particular beam. The new model can be utilized at a meso-scale and in different loading conditions. Two physical experiments are performed to verify the numerical results. The crack patterns and load-displacement response obtained with the proposed numerical model are in good agreement with the experimental results. Moreover, the influence of heterogeneity on crack patterns is also discussed and the correlation existing between the fracture evolution and the loads imposed on the specimen is characterized by fractal dimensions.

  16. Mineral changes in cement-sandstone matrices induced by biocementation

    Energy Technology Data Exchange (ETDEWEB)

    Verba, C. [National Energy Technology Lab. (NETL), Albany, OR (United States); Thurber, A. R. [Oregon State Univ., Corvallis, OR (United States). College of Earth, Ocean, and Atmospheric Sciences; Alleau, Y. [Oregon State Univ., Corvallis, OR (United States). College of Earth, Ocean, and Atmospheric Sciences; Koley, D. [Oregon State Univ., Corvallis, OR (United States). College of Science; Colwell, F. [Oregon State Univ., Corvallis, OR (United States). College of Earth, Ocean, and Atmospheric Sciences; Torres, M. E. [Oregon State Univ., Corvallis, OR (United States). College of Earth, Ocean, and Atmospheric Sciences

    2016-04-01

    Prevention of wellbore CO2 leakage is a critical component of any successful carbon capture, utilization, and storage program. Sporosarcina pasteurii is a bacterium that has demonstrated the potential ability to seal a compromised wellbore through the enzymatic precipitation of CaCO3. In this paper, we investigate the growth of S. pasteurii in a synthetic brine that mimics the Illinois Basin and on Mt. Simon sandstone encased in Class H Portland cement under high pressure and supercritical CO2 (PCO2) conditions. The bacterium grew optimum at 30 °C compared to 40 °C under ambient and high pressure (10 MPa) conditions; and growth was comparable in experiments at high PCO2. Sporosarcina pasteurii actively induced the biomineralization of CaCO3 polymorphs and MgCa(CO3)2 in both ambient and high pressure conditions as observed in electron microscopy. In contrast, abiotic (non-biological) samples exposed to CO2 resulted in the formation of surficial vaterite and calcite. Finally, the ability of S. pasteurii to grow under subsurface conditions may be a promising mechanism to enhance wellbore integrity.

  17. Experimental study on interaction between simulated sandstone and acidic fluid

    Institute of Scientific and Technical Information of China (English)

    Zhang Yongwang; Zeng Jianhu; Yu Bingsong

    2009-01-01

    In order to investigate the controlling mechanism of temperature, fluid and other factors on water-rock interaction in the diagenetic process, we performed a series of simulated experiments on the interaction between two kinds of fluids with different salinity and a composite mineral system (simulated sandstone), which contains albite, K-feldspar and other minerals. The experimental results showed that acidity was the most important factor that affected the dissolution of minerals in the composite mineral system. The lower the pH value, the more easily the minerals dissolved. At the same pH value, the dissolution abilities of different acids for various mineral components were also different. Compared to hydrochloric acid (inorganic acid), oxalic acid (organic acid) was more able to dissolve aluminosilicate minerals. However, the dissolution ability of oxalic acid for carbonate minerals was lower than that of hydrochloric acid. In the process of fluid-rock interaction,dissolution of feldspar was relatively complicated. Increase of temperature would accelerate the dissolution of feldspar. Under acidic conditions, albite had a higher dissolution rate than K-feldspar. K-feldspar could dissolve and convert into montmorillonite and kaolinite, while albite could dissolve and convert into kaolinite both at 40℃ and 80℃. Presence of organic acid, and decrease of pH value and water salinity were all favorable for the dissolution of feldspar, but weakened the ability to form clay minerals.

  18. Geometry of calcite cemented zones in shallow marine sandstones

    Energy Technology Data Exchange (ETDEWEB)

    Walderhaug, O.; Prestholm, E.; Oexnevad, I.E.I.

    1995-12-31

    In offshore oil production, tightly cemented calcite zones often form impermeable barriers to fluid flow an so adversely affect reservoir performance. Based on recent breakthroughs in the theory of the formation of calcite cemented zones, the project discussed in this paper was concerned with (1) Performing outcrop studies in order to increase the existing database on the geometry of calcite cemented zones, (2) Extending and refining methods of predicting the geometry of cored calcite cemented zones, and (3) Applying and illustrating the use of these methods by studying calcite cementation in shallow marine reservoir sandstones on the Norwegian shelf. The paper presents results from field work and applies these results and the criteria for recognizing geometrical forms of calcite cementation in cores to the Ula Formation of the Ula Field and the Rannoch Formation of the Gullfax Field. The results from the core and outcrop studies are integrated in a tentative identification key for cored calcite cemented zones. The work is part of PROFIT (Program for Research On Field oriented Improved recovery Technology), a research project conducted by RF - Rogaland Research in 1991-1994. 32 refs., 10 figs., 2 tabs.

  19. Studies on callose and cutin during the expression of competence and determination for organogenic nodule formation from internodes of Humulus lupulus var. Nugget.

    Science.gov (United States)

    Fortes, Ana M; Testillano, Pilar S; Del Carmen Risueño, Maria; Pais, Maria S

    2002-09-01

    Callose and cutin deposition were followed by staining with Aniline Blue and Nile Red and by immunolocalization using antibodies raised against callose. Along with morphogenesis induction from internodes of Humulus lupulus var. Nugget, a temporal and spatial differential deposition of callose and cutin was observed. A cutin layer showing bright yellow autofluorescence appears, surrounding cells or groups of cells committed to express morphogenic competence. This cutin layer that evolves to a randomly organized network appeared underneath a callose layer and may create a specific cellular environment with altered permeability and altered receptors providing conditions for entering the cell cycle. The incipient callose accumulation in control explants cultured on basal medium suggests the involvement of callose in the initiation of the morphogenic programme leading to nodule formation. A scanning electron microscopic study during the organogenic process showed that before shoot bud regeneration, the cutin layer increases in thickness and acquires a smooth texture. This cutin layer is specific to nodular organogenic regions and disappeared with plantlet regeneration. This layer may control permeability to water and solute transfer throughout plantlet regeneration.

  20. The Influence of Friction Stir Weld Tool Form and Welding Parameters on Weld Structure and Properties: Nugget Bulge in Self-Reacting Friction Stir Welds

    Science.gov (United States)

    Schneider, Judy; Nunes, Arthur C., Jr.; Brendel, Michael S.

    2010-01-01

    Although friction stir welding (FSW) was patented in 1991, process development has been based upon trial and error and the literature still exhibits little understanding of the mechanisms determining weld structure and properties. New concepts emerging from a better understanding of these mechanisms enhance the ability of FSW engineers to think about the FSW process in new ways, inevitably leading to advances in the technology. A kinematic approach in which the FSW flow process is decomposed into several simple flow components has been found to explain the basic structural features of FSW welds and to relate them to tool geometry and process parameters. Using this modelling approach, this study reports on a correlation between the features of the weld nugget, process parameters, weld tool geometry, and weld strength. This correlation presents a way to select process parameters for a given tool geometry so as to optimize weld strength. It also provides clues that may ultimately explain why the weld strength varies within the sample population.

  1. Mineralogical controls on NMR rock surface relaxivity: A case study of the Fontainebleau Sandstone

    Science.gov (United States)

    Livo, Kurt

    Pore size distribution is derived from nuclear magnetic resonance, but is scaled by surface relaxivity. While nuclear magnetic resonance studies generally focus on the difficulty of determining pore size distribution in unconventional shale reservoirs, there is a lack of discussion concerning pure quartz sandstones. Long surface relaxivity causes complications analyzing nuclear magnetic resonance data for pore size distribution determination. Currently, I am unaware of research that addresses the complicated pore size distribution determination in long relaxing, pure sandstone formations, which is essential to accurate downhole petrophysical modeling. The Fontainebleau sandstone is well known for its homogenous mineralogical makeup and wide range of porosity and permeability. The Hibernia sandstone exhibits a similar mineralogy and is characterized by a similar and porosity-permeability range to the Fontainebleau sandstones, but with a significantly higher portion of clay minerals (1-6%). I present systematic petrophysical properties such as porosity, pore size distribution from nuclear magnetic resonance transverse relaxation times, permeability, and volumetric magnetic susceptibility to aide in characterization of the Fontainebleau sandstone. Analysis of collected nuclear magnetic resonance data is then compared to other petrophysical studies from literature such as helium porosity and permeability, magnetic susceptibility, and electrical conductivity. I find that the lack of impurities on the grain surfaces of pure quartz samples imparts a lower surface relaxivity as compared to clay containing sandstones and makes nuclear magnetic resonance analysis more complex. Thus, inverted nuclear magnetic resonance data from cleaner outcrop samples incorrectly models pore size distribution without accounting for wider surface relaxivity variation and is improperly used when characterizing the Fontainebleau sandstone. This is further supported by evidence from less

  2. The influence of diagenesis on the reservoir quality of Cambrian and Carboniferous sandstones, southwest Sinai, Egypt

    Science.gov (United States)

    McBride, Earle F.; Abdel-Wahab, Antar; Salem, Alaa M. K.

    1996-04-01

    The diagenetic influence on hydrocarbon reservoir quality was investigated for the Cambrian and Lower Carboniferous sandstones of southwestern Sinai. These quartzose and feldspathic Palaeozoic sandstones were not buried more than 1 to 1.5 km until Late Cretaceous and more recent times, when the most deeply buried rocks may have reached 25 km. Porosity was reduced by compaction from an assumed original 45% to about 26%. In general, both Cambrian and Carboniferous sandstones lost more porosity by compaction (average of 19% for each) than by cementation (average of 17% and 13%, respectively). There is no significant difference in the degree of compaction shown by Cambrian (older, deeper buried) rather than Carboniferous sandstones. Cementation by iron oxide, quartz, calcite and kaolinite reduced porosity to 12-15%, except in silcretes and some ferricretes where porosity was reduced to <5%. Significant secondary porosity was created (5.8 and 5.1 % for Cambrian and Carboniferous sandstones, respectively ) chiefly by dissolution of feldspar. Kaolinite (maximum of 20%) is the most deleterious cement because it has high microporosity, which causes high residual water saturation, and occurs as tiny crystals that have the potential to break loose during rapid fluid flow and block the pore throats. The present-day porosity in these sandstones averages 19% and ranges from 1.5 to 32%. Many sandstone samples (47% of a total of 178 samples) have permeability values higher than 1000 md. The plot of porosity versus the log of permeability has a good correlation indicating that microporosity, even though locally important, does not significantly influence reservoir quality. In spite of their age and the large volumes of groundwater that probably passed through them, these Palaeozoic sandstones retain sufficient porosity and permeability to possess excellent reservoir quality.

  3. Response to Comment on "A Jurassic ornithischian dinosaur from Siberia with both feathers and scales".

    Science.gov (United States)

    Godefroit, Pascal; Sinitsa, Sofia M; Dhouailly, Danielle; Bolotsky, Yuri L; Sizov, Alexander V; McNamara, Maria E; Benton, Michael J; Spagna, Paul

    2014-10-24

    Lingham-Soliar questions our interpretation of integumentary structures in the Middle-Late Jurassic ornithischian dinosaur Kulindadromeus as feather-like appendages and alternatively proposes that the compound structures observed around the humerus and femur of Kulindadromeus are support fibers associated with badly degraded scales. We consider this hypothesis highly unlikely because of the taphonomy and morphology of the preserved structures.

  4. Battling Jurassic Park: From a Fascination with Violence toward Constructive Knowledge.

    Science.gov (United States)

    Cain, Beverlyn; Bohrer, Cynthia

    1997-01-01

    Studied preschool children's inability to distinguish fantasy from fact utilizing the case of the popular movie Jurassic Park and the subsequent false information children obtained about dinosaurs. Described attempts made by teachers to address the resultant aggressive behavior and false knowledge gained and replace it with constructive knowledge.…

  5. Palynology of uppermost Jurassic and lowermost Cretaceous strata in the Eastern Netherlands

    NARCIS (Netherlands)

    Burger, D.

    1965-01-01

    The present investigation is a systematical treatment of the sporomorphs from strata at the Jurassic-Cretaceous boundary in the eastern Netherlands Twente area, and an attempt to apply palynology to detailed stratigraphical study, by making use of quantitative pollen analyses. The rock samples used

  6. The potential of vertebrate microfossils for marine to non-marine correlation in the Late Jurassic

    Institute of Scientific and Technical Information of China (English)

    Detlev Thies; Alexander Mudroch; Susan Turner

    2007-01-01

    Fish (cartilaginous: elasmobranch and bony: osteichthyan actinopterygian) and reptile (crocodile) microfossils comprising scales and teeth have been examined from a series of limestone samples in the Upper Jurassic of France and Germany to gauge the possibilities of using them for correlation between fully marine and hypo- or hyper-saline (non-marine) deposits.

  7. 3D visualisation of a Jurassic oolitic system with GPR data, Isle of Portland (UK)

    DEFF Research Database (Denmark)

    Moreau, Julien; Hansen, Trine Lykke; Nielsen, Lars

    The Isle of Portland shows exposure of uppermost Jurassic oolitic carbonate all along its coast and within several inland quarries. The exposure quality is very high with a potential 3D control. The site has a potential to understand the 3D architecture and the sedimentary dynamic of an oolitic s...

  8. Strobilus organization in the enigmatic gymnosperm Bernettia inopinata from the Jurassic of Germany

    NARCIS (Netherlands)

    Kustatscher, E.; van Konijnenburg - van Cittert, J.H.A.; Bauer, K.; Krings, M.

    2016-01-01

    The enigmatic fossil Bernettia inopinata from Lower Jurassic strata of Upper Franconia, Germany, has been described as a leaf-like structure a leaf-like structure bearing a proximal cluster of densely spaced, pillow-like objects believed to represent ovules or ovule-containing units. The systematic

  9. New finds of stegosaur tracks from the Upper Jurassic Lourinhã formation, Portugal

    DEFF Research Database (Denmark)

    Mateus, Octavio; Milàn, Jesper; Romano, Michael

    2011-01-01

    Eleven new tracks from the Upper Jurassic of Portugal are described and attributed to the stegosaurian ichnogenus Deltapodus. One track exhibits exceptionally well−preserved impressions of skin on the plantar surface, showing the stegosaur foot to be covered by closely spaced skin tubercles of ca...

  10. Geochemical Characteristics of REE in Jurassic Coal of Yan'an Formation from Dongsheng Coalfield

    Institute of Scientific and Technical Information of China (English)

    赵峰华; 丛志远; 彭苏萍; 唐跃刚; 任德贻

    2002-01-01

    Concentrations of rare earth elements (REE) in Jurassic coal of YanAn Formation from Dongsheng coalfield located in the northeast of Ordos basin were determined by instrumental neutron activation analysis (INAA). Curves of distrib ution pattern of REE were drawn, and many geochemical parameters were calculated . The result shows that 1) The contents of REE in Jurassic coal with low ash an d sulfur are lower than those of Carboniferous and Permian coal from the Basin of North China; 2) Inside the Dongsheng coalfield, coal from the north has high er contents of REE than that form the south because the north is near the area of source rock which is the main supplier of REE, while the south is far away from the area of source rocks; 3) Although Jurassic coal in Dongsheng is the low-ash coal with less than 10%, the contents of REE are still proportional to ash yie ld of ash and SiO2 contents. 4) Although the Jurassic coal in Dongsheng were deposited in oxidative continental environment of river-lake, Eu depletion of RE E I n coal commonly exists, and positive abnormity of Ce dose not exist. This reflec ts the REE distribution pattern of REE in source rock of continental area; and 5) Compared with other rocks, coal shows extremely complexity of distribution pa ttern of REE, which is the result of continuous alteration and redistribution of matter in coal occurred in open basin system.

  11. Klukiopsis jurassica——A new Jurassic schizaeaceous fern from China

    Institute of Scientific and Technical Information of China (English)

    邓胜徽[1; 王仕俊[2

    2000-01-01

    A new Jurassic schizaeaceous fern Klukiopsis jurassica gen. et sp. nov. from Yima, Henan Province, China is described. The new fern is characterized by the abaxial sori arranged in two rows, apical and complete annulus and more than 800 smooth trilete spores in each sorus.

  12. The upper Jurassic-lower cretaceous siliciclastic system in the Morocco offshore - Prevenance, transport and deposition

    NARCIS (Netherlands)

    Bertotti, G.; Arantegui, A.; Charton, R.; Luber, T.; Redfern, J.

    2015-01-01

    The Morocco segment of the Central Atlantic passive continental margin experienced km-scale exhumation during the early post-rift (late Jurassic-Early Cretaceous). In the Meseta and the High Atlas this led to the development of a N-S trending ridge sourcing terrigenous sediments which were brought t

  13. Battling Jurassic Park: From a Fascination with Violence toward Constructive Knowledge.

    Science.gov (United States)

    Cain, Beverlyn; Bohrer, Cynthia

    1997-01-01

    Studied preschool children's inability to distinguish fantasy from fact utilizing the case of the popular movie Jurassic Park and the subsequent false information children obtained about dinosaurs. Described attempts made by teachers to address the resultant aggressive behavior and false knowledge gained and replace it with constructive knowledge.…

  14. Sense-Making--a Case Study Using the Movie "Jurassic Park."

    Science.gov (United States)

    Murphy, Tony P.

    1996-01-01

    Introduces Sense-Making, an alternative methodology which allows an insight into a person's perception of reality. Interviews science teachers following a viewing of "Jurassic Park" to investigate the relationship of the movie to their ontological view of science, society, and self. (Author/MVL)

  15. New Isophlebioid Dragonflies from the Middle Jurassic of Inner Mongolia, China (Insecta: Odonata: Isophlebioptera:Campterophlebiidae)

    Institute of Scientific and Technical Information of China (English)

    ZHANG Binglan; REN Dong; PANG Hong

    2008-01-01

    Three new species of fossil dragonflies assigned to Sinokaratawia Nel, Huang and Lin in family Campterophlebiidae, i.e. S. daohugouica sp. nov., S. magica sp. nov. and S. gloriosa sp. nov., and new materials of male S. prokopi Nel, Huang and Lin, 2007 are described from the Middle Jurassic of Daohugou, Inner Mongolia, China. An emended diagnosis of genus Sinokaratawia was proposed.

  16. Effects of Thermal Treatment on the Dynamic Mechanical Properties of Coal Measures Sandstone

    Science.gov (United States)

    Li, Ming; Mao, Xianbiao; Cao, Lili; Pu, Hai; Mao, Rongrong; Lu, Aihong

    2016-09-01

    Many projects such as the underground gasification of coal seams and coal-bed methane mining (exploitation) widely involve the dynamic problems of coal measures sandstone achieved via thermal treatment. This study examines the dynamic mechanical properties of coal measures sandstone after thermal treatment by means of an MTS653 high-temperature furnace and Split Hopkinson pressure bar test system. Experimental results indicate that 500 °C is a transition point for the dynamic mechanical parameters of coal measures sandstone. The dynamic elastic modulus and peak strength increase linearly from 25 to 500 °C while the dynamic peak strain decreases linearly over the same temperature range. The dynamic elastic modulus and peak strength drop quickly from 500 to 800 °C, with a significant increase in the dynamic peak strain over the same temperature range. The rock mechanics are closely linked to material composition and mesoscopic structure. Analysis by X-ray diffraction and scanning electron microscopy indicate that the molecules inside the sandstone increase in density due to the thermal expansion of the material particles, which effectively improves the deformation resistance and carrying capacity of the sandstone and reduces the likelihood of axial deformation. With heat treatment that exceeds 500 °C, the dynamic mechanical properties rapidly weaken due to the decomposition of kaolinite; additionally, hot cracking of the mineral particles within the materials arises from coal sandstone internal porosity, and other defects gradually appear.

  17. Study on pore characteristics and microstructure of sandstones with different grain sizes

    Science.gov (United States)

    Li, Huigui; Li, Huamin; Gao, Baobin; Wang, Wen; Liu, Chuang

    2017-01-01

    The grain sizes have a pronounced influence on the pore characteristics and microstructure of sandstone. This work examined the pore structure and characteristics of three kinds of sandstones with different grain sizes using the scanning electron microscopy (SEM) and nuclear magnetic resonance (NMR) methods and analyzed their grain size distributions, pore size distributions, T2-distributions, and porosity variations. The experimental results showed that sandstones with different grain sizes have significant differences in the microstructures grain size distribution, pore size distribution, T2-distribution, and porosity variation. The results show that coarse, medium and fine sandstones have two peaks in T2-distributions, mean grain size of 398.5, 145.1 and 25.1 μm, respectively, mean pore size of 46.3, 25.9, and 8.4 μm, respectively, porosity of 7.52%, 5.88% and 1.55%, respectively, indicating that both coarse and medium sandstones contain big pores, while fine sandstone contains small pores. This study is of significance for understanding of water migration characteristics in aquifers and gas in coal seams after the working face exploitation.

  18. Improvement of attenuation functions of a clayey sandstone for landfill leachate containment by bentonite addition.

    Science.gov (United States)

    Ruiz, Ana I; Fernández, Raúl; Sánchez Jiménez, Nicanor; Rodríguez Rastrero, Manuel; Regadío, Mercedes; de Soto, Isabel S; Cuevas, Jaime

    2012-03-01

    Enhanced sand-clay mixtures have been prepared by using a sandstone arkosic material and have been evaluated for consideration as landfill liners. A lab-scale test was carried out under controlled conditions with different amended natural sandstones whereby leachate was passed through the compacted mixtures. The compacted samples consisted of siliceous sand (quartz-feldspar sand separated from the arkose sandstone) and clay (purified clay from arkose sandstone and two commercial bentonites) materials that were mixed in different proportions. The separation of mineral materials from a common and abundant natural source, for soil protection purposes, is proposed as an economic and environmentally efficient practice. The liner qualities were compared for their mineralogical, physicochemical and major ions transport and adsorption properties. Although all samples fulfilled hydraulic conductivity requirements, the addition of bentonite to arkose sandstone was determined to be an effective strategy to decrease the permeability of the soil and to improve the pollutants retention. The clay materials from arkose sandstone also contributed to pollutant retention by a significant improvement of the cation exchange capacity of the bulk material. However, the mixtures prepared with clay materials from the arkose, exhibited a slight increase of hydraulic conductivity. This effect has to be further evaluated. Copyright © 2011 Elsevier B.V. All rights reserved.

  19. Brittleness index and seismic rock physics model for anisotropic tight-oil sandstone reservoirs

    Institute of Scientific and Technical Information of China (English)

    Huang Xin-Rui; Huang Jian-Ping; Li Zhen-Chun; Yang Qin-Yong; Sun Qi-Xing; Cui Wei

    2015-01-01

    Brittleness analysis becomes important when looking for sweet spots in tight-oil sandstone reservoirs. Hence, appropriate indices are required as accurate brittleness evaluation criteria. We construct a seismic rock physics model for tight-oil sandstone reservoirs with vertical fractures. Because of the complexities in lithology and pore structure and the anisotropic characteristics of tight-oil sandstone reservoirs, the proposed model is based on the solid components, pore connectivity, pore type, and fractures to better describe the sandstone reservoir microstructure. Using the model, we analyze the brittleness sensitivity of the elastic parameters in an anisotropic medium and establish a new brittleness index. We show the applicability of the proposed brittleness index for tight-oil sandstone reservoirs by considering the brittleness sensitivity, the rock physics response characteristics, and cross-plots. Compared with conventional brittleness indexes, the new brittleness index has high brittleness sensitivity and it is the highest in oil-bearing brittle zones with relatively high porosity. The results also suggest that the new brittleness index is much more sensitive to elastic properties variations, and thus can presumably better predict the brittleness characteristics of sweet spots in tight-oil sandstone reservoirs.

  20. Factors controlling reservoir quality in tertiary sandstones and their significance to geopressured geothermal production

    Energy Technology Data Exchange (ETDEWEB)

    Loucks, R.G.; Richmann, D.L.; Milliken, K.L.

    1981-01-01

    Variable intensity of diagenesis is the factor primarily responsible for contrasting regional reservoir quality of Tertiary sandstones from the upper and lower Texas coast. Detailed comparison of Frio sandstone from the Chocolate Bayou/Danbury Dome area, Brazoria County, and Vicksburg sandstones from the McAllen Ranch Field area, Hidalgo County, reveals that extent of diagenetic modification is most strongly influenced by (1) detrital mineralogy and (2) regional geothermal gradients. The regional reservoir quality of Frio sandstones from Brazoria County is far better than that characterizing Vicksburg sandstones from Hidalgo County, especially at depths suitable for geopressured geothermal energy production. However, in predicting reservoir quality on a site-specific basis, locally variable factors such as relative proportions for porosity types, pore geometry as related to permeability, and local depositional environment must also be considered. Even in an area of regionally favorable reservoir quality, such local factors can significantly affect reservoir quality and, hence, the geothermal production potential of a specific sandstone unit.

  1. Evolutionary and Ecological Sequelae of Mass Extinctions: Examples From the Continental Triassic-Jurassic Boundary

    Science.gov (United States)

    Olsen, P. E.; Whiteside, J. H.

    2003-12-01

    The Triassic-Jurassic boundary at ˜200 Ma marks one of the five major mass-extinctions of the Phanerozoic and, depending on the metrics used, was similar in magnitude to the K-T mass extinction. In continental environments about 50% of all tetrapod families are eliminated and although floral diversity change is difficult to gauge, a similar proportion of palynomorph taxa disappear at the boundary. The extinction event appears to have been very abrupt, followed by a roughly 900 ky super-greenhouse period characterized by increased precipitation. We hypothesize a series of biological consequences of the drop in diversity and associated super-greenhouse based on observations of the earliest Jurassic assemblages, largely from eastern North America. 1) The drop in diversity results in a collapse of ecological interactions that tend to stabilize the composition of regional biotas and buffer them from invading forms. Triassic assemblages show considerable biogeographic provinciality despite the existence of Pangea, but the earliest Jurassic assemblages were extraordinarily homogenous with many vertebrate genera being essentially global in distribution. 2) Initially the post-boundary terrestrial assemblages were comprised of eurytopic trophic generalists, with animal communities with few herbivores, but abundant carnivores and detritivores subsisting on aquatic-based food webs. The earliest Jurassic tetrapod footprint record is overwhelmingly dominated by the footprints of ceratosaurian theropod dinosaurs, the latter having skull characteristics usually associated at least in part with piscivory. 3) The dramatic size changes over very short periods of time were likely due to an absence of competition (i.e., ecological release). The maximum size of theropod dinosaur footprints increased by about 25% within 10 ky following the boundary, corresponding to a doubling of mass. 4) Representatives of clades with intrinsically high rates of speciation tend to form species flocks

  2. Jurassic extension and Cenozoic inversion tectonics in the Asturian Basin, NW Iberian Peninsula: 3D structural model and kinematic evolution

    Science.gov (United States)

    Uzkeda, Hodei; Bulnes, Mayte; Poblet, Josep; García-Ramos, José Carlos; Piñuela, Laura

    2016-09-01

    We constructed a geological map, a 3D model and cross-sections, carried out a structural analysis, determined the stress fields and tectonic transport vectors, restored a cross section and performed a subsidence analysis to unravel the kinematic evolution of the NE emerged portion of the Asturian Basin (NW Iberian Peninsula), where Jurassic rocks crop out. The major folds run NW-SE, normal faults exhibit three dominant orientations: NW-SE, NE-SW and E-W, and thrusts display E-W strikes. After Upper Triassic-Lower Jurassic thermal subsidence, Middle Jurassic doming occurred, accompanied by normal faulting, high heat flow and basin uplift, followed by Upper Jurassic high-rate basin subsidence. Another extensional event, possibly during Late Jurassic-Early Cretaceous, caused an increment in the normal faults displacement. A contractional event, probably of Cenozoic age, led to selective and irregularly distributed buttressing and fault reactivation as reverse or strike-slip faults, and folding and/or offset of some previous faults by new generation folds and thrusts. The Middle Jurassic event could be a precursor of the Bay of Biscay and North Atlantic opening that occurred from Late Jurassic to Early Cretaceous, whereas the Cenozoic event would be responsible for the Pyrenean and Cantabrian ranges and the partial closure of the Bay of Biscay.

  3. A Jurassic Shock-Aftershock Earthquake Sequence Recorded by Small Clastic Pipes and Dikes within Dune Cross-Strata, Zion National Park, Utah

    Science.gov (United States)

    Loope, D. B.; Zlotnik, V. A.; Kettler, R. M.; Pederson, D. T.

    2012-12-01

    Eolian sandstones of south-central and southeast Utah contain large volumes of contorted cross-strata that have long been recognized as products of liquefaction caused by seismic shaking. Unlike most sites where Navajo Sandstone is exposed, in Zion National Park (southwestern Utah), the Navajo contains very, very few contorted strata. We have, however, mapped the distribution of more than 1,000 small-scale, vertical pipes and dikes in uncontorted cross-strata of the Navajo at two small study sites in Zion. Pipes are 2-5 cm in diameter and up to 3 m long; dikes are ~6 cm wide. Clusters of the water-escape structures lie directly above and below numerous, near-horizontal bounding surfaces. Dikes are restricted to the wind-ripple strata that lie above the bounding surfaces. Pipes are common both above and below the bounding surfaces. In map view, most pipes are arranged in lines. Near the bounding surfaces, pipes merge upward with shallow dikes trending parallel to the lines of pipes. Pipes formed in grainflows—homogeneous, well-sorted sand lacking cohesion. Dikes formed above the bounding surface, in more-cohesive, poorly sorted, wind-ripple strata. As liquefaction began, expansion of subsurface sand caused spreading within the unliquified (capping) beds near the land surface. Dikes intruded cracks in the wind-ripple strata, and pipes rose from the better-sorted sand to interdune surfaces, following trends of cracks. Because the wind-ripple strata had low cohesive strength, a depression formed around each rupture, and ejected sand built upward to a flat-topped surface rather than forming the cone of a classic sand volcano. In one 3 m2 portion of the map area, a cluster of about 20 pipes and dikes, many with truncated tops, record eight stratigraphically distinct seismic events. The large dunes that deposited the Navajo cross-strata likely moved ~1m/yr. When, in response to seismic shaking, a few liters of fluidized sand erupted onto the lowermost portion of the

  4. Basin geodynamics and sequence stratigraphy of Upper Triassic to Lower Jurassic deposits of Southern Tunisia

    Science.gov (United States)

    Carpentier, Cédric; Hadouth, Suhail; Bouaziz, Samir; Lathuilière, Bernard; Rubino, Jean-Loup

    2016-05-01

    Aims of this paper are to propose a geodynamic and sequential framework for the late Triassic and early Jurassic of and south Tunisia and to evidence the impact of local tectonics on the stratigraphic architecture. Facies of the Upper Triassic to Lower Jurassic of Southern Tunisia have been interpreted in terms of depositional environments. A sequential framework and correlation schemes are proposed for outcrops and subsurface transects. Nineteen middle frequency sequences inserted in three and a half low frequency transgression/regression cycles were evidenced. Despite some datation uncertainties and the unknown durations of Lower Jurassic cycles, middle frequency sequences appear to be controlled by eustasy. In contrast the tectonics acted as an important control on low frequency cycles. The Carnian flooding was certainly favored by the last stages of a rifting episode which started during the Permian. The regression accompanied by the formation of stacked angular unconformities and the deposition of lowstand deposits during the late Carnian and Norian occured during the uplift and tilting of the northern basin margins. The transpressional activity of the Jeffara fault system generated the uplift of the Tebaga of Medenine high from the late Carnian and led to the Rhaetian regional angular Sidi Stout Unconformity. Facies analysis and well-log correlations permitted to evidence that Rhaetian to Lower Jurassic Messaoudi dolomites correspond to brecciated dolomites present on the Sidi Stout unconformity in the North Dahar area. The Early-cimmerian compressional event is a possible origin for the global uplift of the northern African margin and Western Europe during the late Carnian and the Norian. During the Rhaetian and the early Jurassic a new episode of normal faulting occured during the third low frequency flooding. This tectonosedimentary evolution ranges within the general geodynamic framework of the north Gondwana margin controlled by the opening of both

  5. Trans-border (north-east Serbia/north-west Bulgaria correlations of the Jurassic lithostratigraphic units

    Directory of Open Access Journals (Sweden)

    Tchoumatchenco Platon

    2011-01-01

    Full Text Available Herein, correlations of the Jurassic sediments from NE Serbia with those of NW Bulgaria are made. The following Jurassic palaeogeographic units: the Eastern Getic, the Infra-Getic and the Moesian Platform are included in the study. The East Getic was studied in the outcrops near Rgotina, where the sedimentation started in the Hettangian and continued during the Callovian-Late Jurassic and is represented by platform carbonates. The Infra-Getic is documented by the sections of Dobra (Pesača and the allochtonous sediments near the Štubik. Very important for the Infra-Getic are the Late Jurassic volcano-sedimentary deposits of the Vratarnica Series, which crop out near Vratarnica Village. The Jurassic Moesian platform was studied in the sections near D. Milanovac and Novo Korito (Serbia and in their prolongation in NW Bulgaria into the Gornobelotintsi palaeograben. Very important are the correlation in the region of Vrška Čuka (Serbia and Vrashka Chuka (Bulgaria - Rabisha Village (Magura Cave. A revision of the Jurassic sediments on the Vidin palaeohorst, which were studied in the Belogradchik palaeohorst, Gorno-Belotintsi palaeograben, Belimel palaeohorst and the Mihaylovgrad palaeograben, is made. The sedimentation on the Vidin palaeohorst started during different parts of the Middle Jurassic, and in the Mihaylovgrad palaeograben during the Hettangian (Lower Jurassic where the sediments were deposited in relatively deeper water conditions. To south, the relatively shallow water sediments deposited on the Jurassic Vratsa palaeohorst on the southern board of the Mihaylovgrad palaeograben are described.

  6. Facies analysis of an ancient, dismembered, large caldera complex and implications for intra-arc subsidence: Middle Jurassic strata of Cobre Ridge, southern Arizona, USA

    Science.gov (United States)

    Riggs, Nancy R.; Busby-Spera, Cathy J.

    1991-11-01

    The Middle Jurassic (˜ 170 Ma) Cobre Ridge caldera is an elongate caldera complex that formed during the eruption of the tuff of Pajarito, a crystal-rich rhyodacite ignimbrite with an estimated volume > 1000 km 3. The caldera subsided in two subequal blocks: to the southeast, caldera-forming ignimbrite is as much as 3000 m thick, whereas the northwest half of the caldera subsided to lesser depths during the initial eruption, but was the locus of subsidence during subsequent eruptions, providing a depocenter for a > 1.5 km-thick section of secondary- and post-collapse volcanic and sedimentary strata. These strata record moat formation and filling and waning volcanism, including: (1) areally restricted ignimbrites up to several tens of meters thick that may have been ponded between caldera margins and/or fault scarps; (2) a ⩾ 600 m-thick ignimbrite whose eruption probably caused further collapse of the caldera or enlargement of the caldera margins; (3) a localized debris apron deposit up to 500 m thick that represents material reworked from intra-caldera pyroclastic deposits and possibly caldera walls; and (4) eolian and fluvial sandstones and water-lain tuffs. Megabreccia blocks as large as 0.5 km along strike probably demarcate approximate caldera margins, suggesting that the composite caldera was approximately 50 km long by 25 km wide. The preserved thickness of the strata of Cobre Ridge ( > 4500 m) is greater than many ancient continental volcanic sequences, suggesting external (i.e. tectonic) controls on subsidence, but preservation of this great thickness of strata is apparently due entirely to volcanic subsidence.

  7. The influence of clay minerals on acoustic properties of sandstones

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, Olav

    1997-12-31

    This thesis aims to provide better understanding of the relationship between the acoustic properties and the petrophysical/mineralogical properties in sand-prone rock. It emphasizes the influence of clay minerals. The author develops a method to deposit clay minerals/mineral aggregates in pore space of a rigid rock framework. Kaolinite aggregates were flushed into porous permeable Bentheimer sandstone to evaluate the effect of pore filling minerals on porosity, permeability and acoustic properties. The compressional velocity was hardly affected by the clay content and it was found that the effect of minor quantities of pore filling minerals may be acoustically modelled as an ideal suspension, where the pore fluid bulk modulus is modified by the bulk modulus of the clay minerals. The influence of clays on acoustic velocities in petroleum reservoir rocks was investigated through ultrasonic measurements of compressional- and shear-waves on core material from reservoir and non-reservoir units on the Norwegian Continental Shelf. The measured velocities decrease as the porosity increases, but are not strongly dependent on the clay content. The measured velocities are less dependent on the petrophysical and lithological properties than indicated by previous authors and published mathematical models, and stiffness reduction factors are introduced in two of the models to better match the data. Velocities are estimated along the wellbores based on non-sonic well logs and reflect well the actual sonic log well measurements. In some wells the compressional velocity cannot be modelled correctly by the models suggested. Very high compressional wave anisotropy was measured in the dry samples at atmospheric conditions. As the samples were saturated, the anisotropy was reduced to a maximum of about 30% and decreases further upon pressurization. Reservoir rocks retrieved from 2500 m are more stress dependent than those retrieved from less than 200 m depth. 168 refs., 117 figs., 24

  8. 塔里木盆地库车坳陷致密砂岩气藏成因类型%Genetic Types of the Tight Sandstone Gas Reservoirs in the Kuqa Depression, Tarim Basin, NW China

    Institute of Scientific and Technical Information of China (English)

    李卓; 姜振学; 庞雄奇; 李峰; 张宝收

    2013-01-01

    To further understand the genetic types of the tight sandstone gas reservoirs in Kuqa depression, the core from tight sandstone gas reservoirs is sampled to carry out the analysis on hydrocarbon charge history and porosity evolutioa The hydrocarbon charge history is investigated by analyzing the fluid inclusion petrography, and microther mometry and the porosity evolution is restored by using the model of deposition-structure -diagenesis. Combining with gas-water relationship and distribution of tight sandstone gas reservoirs. There are two charge events in the YN2 Jurassic tight sandstone reservoir, with the one of oil charge during 23-12 Ma, and the other gas charge during 5-0 Ma. The reservoir porosity dropped to less than 12% and became tight during the period of 12-8 Ma Two charge events have been recorded in the DN2 Paleogene tight sandstone reservoir; the former is oil charge during 23-12 Ma, and the latter is the gas charge during 5 - 0 Ma. The reservoir porosity dropped to less than 12% during the period of 2-0 Ma and became tight later. Two genetic types of tight sandstone gas reservoirs have been confirmed. The YN2 Jurassic tight sandstone reservoir is of the genetic type of "tight deep basin gas reservoir" with the accumulation process of gas charge after the reservoir tightened and the DN2 Paleogene tight sandstone reservoir is defined as "tight conventional gas reservoir" with the accumulation process of gas charge before the reservoir tightened. This study is of significance for further exploration and exploitation of tight sandstone gas in Kuqa depressioa.%为深化对库车坳陷致密砂岩气藏成因类型的认识,采集致密砂岩储层岩样,开展了油气充注史和孔隙度演化史研究.通过流体包裹体岩相学和显微测温厘定了油气充注史,利用沉积-构造-成岩一体化模型恢复了储层孔隙度演化史,根据两者的先后关系,划分了致密砂岩气藏的成因类型.结果表明,依南2侏罗系气藏

  9. Predicting cement distribution in geothermal sandstone reservoirs based on estimates of precipitation temperatures

    Science.gov (United States)

    Olivarius, Mette; Weibel, Rikke; Whitehouse, Martin; Kristensen, Lars; Hjuler, Morten L.; Mathiesen, Anders; Boyce, Adrian J.; Nielsen, Lars H.

    2016-04-01

    Exploitation of geothermal sandstone reservoirs is challenged by pore-cementing minerals since they reduce the fluid flow through the sandstones. Geothermal exploration aims at finding sandstone bodies located at depths that are adequate for sufficiently warm water to be extracted, but without being too cemented for warm water production. The amount of cement is highly variable in the Danish geothermal reservoirs which mainly comprise the Bunter Sandstone, Skagerrak and Gassum formations. The present study involves bulk and in situ stable isotope analyses of calcite, dolomite, ankerite, siderite and quartz in order to estimate at what depth they were formed and enable prediction of where they can be found. The δ18O values measured in the carbonate minerals and quartz overgrowths are related to depth since they are a result of the temperatures of the pore fluid. Thus the values indicate the precipitation temperatures and they fit the relative diagenetic timing identified by petrographical observations. The sandstones deposited during arid climatic conditions contain calcite and dolomite cement that formed during early diagenesis. These carbonate minerals precipitated as a response to different processes, and precipitation of macro-quartz took over at deeper burial. Siderite was the first carbonate mineral that formed in the sandstones that were deposited in a humid climate. Calcite began precipitating at increased burial depth and ankerite formed during deep burial and replaced some of the other phases. Ankerite and quartz formed in the same temperature interval so constrains on the isotopic composition of the pore fluid can be achieved. Differences in δ13C values exist between the sandstones that were deposited in arid versus humid environments, which suggest that different kinds of processes were active. The estimated precipitation temperatures of the different cement types are used to predict which of them are present in geothermal sandstone reservoirs in

  10. GREYBULL SANDSTONE PETROLEUM POTENTIAL ON THE CROW INDIAN RESERVATION, SOUTH-CENTRAL MONTANA

    Energy Technology Data Exchange (ETDEWEB)

    David A. Lopez

    2000-12-14

    Evaluation of the Lower Cretaceous Greybull Sandstone on the Crow Indian Reservation for potential stratigraphic traps in the valley-fill sandstone was the focus of this project. The Crow Reservation area, located in south-central Montana, is part of the Rocky Mountain Foreland structural province, which is characterized by Laramide uplifts and intervening structural basins. The Pryor and Bighorn mountains, like other foreland uplifts, are characterized by asymmetrical folds associated with basement-involved reverse faults. The reservation area east of the mountains is on the northwestern flank of the Powder River Basin. Therefore, regional dips are eastward and southeastward; however, several prominent structural features interrupt these regional dips. The nearly 4,000 mi{sup 2} reservation is under explored but has strong potential for increased oil and gas development. Oil and gas production is well established in the Powder River Basin of Wyoming to the south as well as in the areas north and west of the reservation. However, only limited petroleum production has been established within the reservation. Geologic relations and trends indicate strong potential for oil and gas accumulations, but drilling has been insufficient for their discovery. The Greybull Sandstone, which is part of the transgressive systems tract that includes the overlying Fall River Sandstone, was deposited on a major regional unconformity. The erosional surface at the base of the Greybull Sandstone is the +100 Ma, late Aptian-Early Albian regional unconformity of Weimer (1984). This lowstand erosional surface was controlled by a basin-wide drop in sea level. In areas where incised Greybull channels are absent, the lowstand erosional unconformity is at the base of the Fall River Sandstone and equivalent formations. During the pre-Greybull lowstand, sediment bypassed this region. In the subsequent marine transgression, streams began to aggrade and deposit sand of the lower Greybull Sandstone

  11. Statistical analyses on sandstones: Systematic approach for predicting petrographical and petrophysical properties

    Science.gov (United States)

    Stück, H. L.; Siegesmund, S.

    2012-04-01

    Sandstones are a popular natural stone due to their wide occurrence and availability. The different applications for these stones have led to an increase in demand. From the viewpoint of conservation and the natural stone industry, an understanding of the material behaviour of this construction material is very important. Sandstones are a highly heterogeneous material. Based on statistical analyses with a sufficiently large dataset, a systematic approach to predicting the material behaviour should be possible. Since the literature already contains a large volume of data concerning the petrographical and petrophysical properties of sandstones, a large dataset could be compiled for the statistical analyses. The aim of this study is to develop constraints on the material behaviour and especially on the weathering behaviour of sandstones. Approximately 300 samples from historical and presently mined natural sandstones in Germany and ones described worldwide were included in the statistical approach. The mineralogical composition and fabric characteristics were determined from detailed thin section analyses and descriptions in the literature. Particular attention was paid to evaluating the compositional and textural maturity, grain contact respectively contact thickness, type of cement, degree of alteration and the intergranular volume. Statistical methods were used to test for normal distributions and calculating the linear regression of the basic petrophysical properties of density, porosity, water uptake as well as the strength. The sandstones were classified into three different pore size distributions and evaluated with the other petrophysical properties. Weathering behavior like hygric swelling and salt loading tests were also included. To identify similarities between individual sandstones or to define groups of specific sandstone types, principle component analysis, cluster analysis and factor analysis were applied. Our results show that composition and porosity

  12. Sedimentological reservoir characteristics of the Paleocene fluvial/lacustrine Yabus Sandstone, Melut Basin, Sudan

    Science.gov (United States)

    Mahgoub, M. I.; Padmanabhan, E.; Abdullatif, O. M.

    2016-11-01

    Melut Basin in Sudan is regionally linked to the Mesozoic-Cenozoic Central and Western African Rift System (CWARS). The Paleocene Yabus Formation is the main oil producing reservoir in the basin. It is dominated by channel sandstone and shales deposited in fluvial/lacustrine environment during the third phase of rifting in the basin. Different scales of sedimentological heterogeneities influenced reservoir quality and architecture. The cores and well logs analyses revealed seven lithofacies representing fluvial, deltaic and lacustrine depositional environments. The sandstone is medium to coarse-grained, poorly to moderately-sorted and sub-angular to sub-rounded, arkosic-subarkosic to sublitharenite. On the basin scale, the Yabus Formation showed variation in sandstone bodies, thickness, geometry and architecture. On macro-scale, reservoir quality varies vertically and laterally within Yabus Sandstone where it shows progressive fining upward tendencies with different degrees of connectivity. The lower part of the reservoir showed well-connected and amalgamated sandstone bodies, the middle to the upper parts, however, have moderate to low sandstone bodies' connectivity and amalgamation. On micro-scale, sandstone reservoir quality is directly affected by textures and diagenetic changes such as compaction, cementation, alteration, dissolution and kaolinite clays pore fill and coat all have significantly reduced the reservoir porosity and permeability. The estimated porosity in Yabus Formation ranges from 2 to 20% with an average of 12%; while permeability varies from 200 to 500 mD and up to 1 Darcy. The understanding of different scales of sedimentological reservoir heterogeneities might contribute to better reservoir quality prediction, architecture, consequently enhancing development and productivity.

  13. Mechanistic study of wettability alteration of oil-wet sandstone surface using different surfactants

    Energy Technology Data Exchange (ETDEWEB)

    Hou, Bao-feng, E-mail: hbf370283@163.com; Wang, Ye-fei; Huang, Yong

    2015-03-01

    Graphical abstract: Zeta potential of oil-wet quartz powder treated with different surfactants at different concentrations. - Highlights: • Mechanisms of wettability alteration during surfactant flooding were studied. • Different analytical instruments were used to study sandstone wettability alteration. • Surfactants’ structure plays a great role in wettability alteration of solid surface. • CTAB irreversibly desorbs carboxylic acid from solid surface by ionic interaction. • Cationic surfactant is more effective in wettability alteration of sandstone surface. - Abstract: Different analytical methods including Fourier transform infrared (FTIR), atomic force microscopy (AFM), zeta potential measurements, contact angle measurements and spontaneous imbibition tests were utilized to make clear the mechanism for wettability alteration of oil-wet sandstone surface using different surfactants. Results show that among three types of surfactants including cationic surfactants, anionic surfactants and nonionic surfactants, the cationic surfactant CTAB demonstrates the best effect on the wettability alteration of oil-wet sandstone surface. The positively charged head groups of CTAB molecules and carboxylic acid groups from crude oil could interact to form ion pairs, which could be desorbed from the solid surface and solubilized into the micelle formed by CTAB. Thus, the water-wetness of the solid surface is improved. Nonionic surfactant TX-100 could be adsorbed on oil-wet sandstone surface through hydrogen bonds and hydrophobic interaction to alter the wettability of oil-wet solid surface. The wettability alteration of oil-wet sandstone surface using the anionic surfactant POE(1) is caused by hydrophobic interaction. Due to the electrostatic repulsion between the anionic surfactant and the negatively charged surface, POE(1) shows less effect on the wettability alteration of oil-wet sandstone surface.

  14. Salamanca sandstone: a good GHSR not suitable for all construction purposes.

    Science.gov (United States)

    Pereira, Dolores; Blanco, Jose Antonio; Nespereira, Jose

    2016-04-01

    Salamanca sandstone, which in fact is an opal-cemented formation of sandstones and conglomerates, was used in the construction of many historical buildings of Salamanca old city, as well as other places nearby. Salamanca is recognized as World Heritage site since 1988, precisely because the homogeneous architecture and the use of local natural resources, as the Salamanca sandstone, the Villamayor sandstone and some local granites. The reason for using the sedimentary stone was the easy access of the resource, as the city is built on top of the Salamanca sandstone Formation, a late Cretaceous-early Palaeocene deposit. This formation consists of siliciclastic successions that were deposited in braided fluvial systems. These materials are derived from a deeply weathered Variscan basement showing ferruginous alteration that adds an aesthetic value to the global view of the natural stone. However, after several centuries, the stone has started to show serious problems due to water absorption, mainly in those places where it was used as basement of the buildings. Restoration of historical buildings should consider the use of the same original material when replacement is requested. But when this original material has been demonstrated to be not appropriate for long-term constructions, a matching and preferable natural stone should be used for replacement. There is such possibility in Salamanca and this has not have to mean the disregard of the Salamanca sandstone for other uses. The natural stone has been used for interior use and for sculpture with quality results. We present the Salamanca sandstone as a possible candidate to be taken into account as GHSR, supported by complete characterization and use recommendation.

  15. Evidence of Multi-Stage Hydrocarbon Charging and Biodegradation of the Silurian Asphaltic Sandstones in the Tarim Basin, China

    Institute of Scientific and Technical Information of China (English)

    刘洛夫

    2002-01-01

    Asphalts distributed widely in the Silurian sandstones of the Tarim Basin include dry asphalt, soft asphalt and heavy oil. These asphaltic sandstones underwent multi-episodic sedimentary and tectonic events, and their occurrence is diverse and complex, being mixed with normal oil usually. So far, very little work has been done on the asphaltic sandstone origin and hydrocarbon charging ages. After detailed study on the Silurian sandstones, the following highlights were obtained from the analytical results: distribution of the mixed asphalt, heavy oil and normal oil in the Silurian sandstones is the result of multi-stage hydrocarbon charging from the Lower Paleozoic marine source rocks; the characters of asphalts formed from oils of different charging ages are of difference; the most important process constraining.the asphaltic sandstone origin is thought to be biodegradation.

  16. Lack of inhibiting effect of oil emplacement on quartz cementation: Evidence from Cambrian reservoir sandstones, Paleozoic Baltic Basin

    DEFF Research Database (Denmark)

    Molenaar, Nicolaas; Cyziene, Jolanta; Sliaupa, Saulius;

    2008-01-01

    Currently, the question of whether or not the presence of oil in sandstone inhibits quartz cementation and preserves porosity is still debated. Data from a number of Cambrian sandstone oil fields and dry fields have been studied to determine the effects of oil emplacement on quartz cementation...... cementation is derived from internal sources. Rather, in spite of large variation in porosity and quartz cement content, a regular pattern of porosity decrease is related to increasing temperature or depth. The observed heterogeneity is due to local factors that influence the precipitation of quartz cement......, including sandstone architecture, i.e., distribution of shales within the sandstone bodies, and sandstone thickness. Heterogeneity is inherent to sandstone architecture and to the fact that silica for quartz cementation is derived from heterogeneously distributed local pressure solution. Models predicting...

  17. Heavy mineral concentrations in the sandstones of Amij Formation with particular emphasis on the mineral chemistry and petrographic characteristics of monazite, western desert of Iraq

    Science.gov (United States)

    Kettanah, Yawooz A.; Ismail, Sabah A.

    2016-11-01

    The heavy minerals in the clastic unit of the Lower Jurassic Amij Formation exposed in the western desert of Iraq were studied. The uppermost part of the clastic unit contains thin, placer-like black sandstone horizons that are radioactive and abnormally rich in heavy minerals (0.6-56%), dominated by opaque (65%) and transparent (35%) heavy minerals. The minerals, in the order of decreasing abundance are pseudorutile, goethite, zircon, hematite, magnetite, monazite, rutile, leucoxene, tourmaline, ilmenite, chromite, and few others. Electron probe microanalysis (EPMA), microscopic and autoradiographic observations and analysis showed that the monazite is monazite-(Ce) type with an average composition of (Ce0.39Nd0.16La0.19Pr0.04Sm0.02Gd0.02Eu0.01Y0·04Th0·06U0·01Ca0·05Fe0.01)(P0·98Si0.03)O4. Monazite consists predominantly of REE-oxides (57.93%) and P2O5 (29.31%), with minor amounts of ThO2 (6.60%), Y2O3 (1.92%), UO2 (0.76%), CaO (1.14%), SiO2 (0.69%), and FeOt (0.17%). The dominant compositional substitution operating between REE and P were a mixture of the complex cheralite type substitution ([REE]-2 [Th][Ca]) and the coupled huttonite type substitution ([REE]-1 [P]-1 [Th][Si]). The chondrite-normalized REE distribution patterns of monazite show enrichment in LREE with positive Eu- and Pr-anomalies of 1.46 and 9.13, respectively. The median values of (La/Sm)CN and (La/Nd)CN ratios are 4.35 and 1.97, respectively. Zircon which is the dominant transparent mineral is Hf-rich that is composed of 30.61% SiO2, 57.58% ZrO2, 7.03% HfO2, 2.04% Y2O3, 0.56% ThO2, 0.19% UO2, and 0.19% Al2O3 corresponding to a formula (Zr0.909Hf0.065Th0·004U0·001Y0.031)Σ1.011(Si3·966Al0.028)Σ0.999O4. Rutile and tourmaline form 7% and 4% of the heavy minerals. Ilmenite which is one of the predominant heavy minerals forms 2.5% of the opaques because it is pervasively altered to Ti-Fe oxides. In addition of zircon and monazite, the chemical compositions of most of the other heavy

  18. Aceitação sensorial de reestruturados empanados elaborados com filé de peito de galinhas matrizes de corte e poedeiras comerciais Sensory acceptance of nuggets prepared with broiler breeder and spent layer hens breast meat

    Directory of Open Access Journals (Sweden)

    Tatiana Pacheco Nunes

    2006-12-01

    Full Text Available Em 2005, no Brasil, o alojamento de galinhas poedeiras comerciais e de matrizes de corte somados foi de 109 milhões de cabeças, sendo que um número próximo a este deve ter sido descartado no mesmo período. Este grande número de galinhas descartadas contrasta com a falta de mercado consumidor e o baixo valor comercial alcançado por estas aves. A utilização da carne de galinhas na elaboração de produtos de conveniência poderia agregar valor e ampliar o consumo desta matéria-prima. Diante do exposto, o objetivo deste trabalho foi elaborar produtos empanados tipo nuggets, utilizando carne de galinhas de descarte (matrizes de corte e poedeiras comercias brancas e avaliar a aceitação pelo consumidor destes produtos, em comparação com nuggets elaborados com carne de frango. Os produtos desenvolvidos foram avaliados por análise sensorial, utilizando testes de aceitação e de intenção de compra em localização central (400 provadores. Não foram encontradas diferenças (p > 0,05 na aceitação sensorial nem na intenção de compra entre os três diferentes produtos avaliados. Concluiu-se que a elaboração de produtos empanados pode representar uma boa alternativa para a utilização de filés de peito de galinhas, agregando maior valor a estas aves ao final do ciclo de postura.In Brazil, the flock size of layer and broiler breeder hens housed in 2005 was 109 million. A similar number of hens might be spent in this period. This great number of spent hens contrasts with the absence of consumer market and the low commercial value reached by these birds. The manufacture of convenience products using spent hens meat could add value and elevate the consumption of this raw material. Thus, the purpose of this study was to develop nuggets made with spent hens (white layers and broiler breeders meat and evaluate the consumer acceptance of these products in comparison to nuggets elaborated with broiler meat. Sensory evaluation of acceptance

  19. A taxonomic review of the Late Jurassic eucryptodiran turtles from the Jura Mountains (Switzerland and France

    Directory of Open Access Journals (Sweden)

    Jérémy Anquetin

    2014-05-01

    Full Text Available Background. Eucryptodiran turtles from the Late Jurassic (mainly Kimmeridgian deposits of the Jura Mountains (Switzerland and France are among the earliest named species traditionally referred to the Plesiochelyidae, Thalassemydidae, and Eurysternidae. As such, they are a reference for the study of Late Jurassic eucryptodires at the European scale. Fifteen species and four genera have been typified based on material from the Late Jurassic of the Jura Mountains. In the past 50 years, diverging taxonomic reassessments have been proposed for these turtles with little agreement in sight. In addition, there has been a shift of focus from shell to cranial anatomy in the past forty years, although most of these species are only represented by shell material. As a result, the taxonomic status of many of these 15 species remains ambiguous, which prevents comprehensive comparison of Late Jurassic turtle assemblages throughout Europe and hinders description of new discoveries, such as the new assemblage recently unearthed in the vicinity of Porrentruy, Switzerland.Methods. An exhaustive reassessment of the available material provides new insights into the comparative anatomy of these turtles. The taxonomic status of each of the 15 species typified based on material from the Late Jurassic of the Jura Mountains is evaluated. New diagnoses and general descriptions are provided for each valid taxon.Results. Six out of the 15 available species names are recognized as valid: Plesiochelys etalloni, Craspedochelys picteti, Craspedochelys jaccardi, Tropidemys langii, Thalassemys hugii, and ‘Thalassemys’ moseri. The intraspecific variability of the shell of P. etalloni is discussed based on a sample of about 30 relatively complete specimens from Solothurn, Switzerland. New characters are proposed to differentiate P. etalloni, C. picteti, and C. jaccardi, therefore rejecting the previously proposed synonymy of these forms. Based partly on previously undescribed

  20. Tango in the Mid-Jurassic: 10,000-Yr Geomagnetic Field Reversals

    Science.gov (United States)

    Steiner, M.

    2001-12-01

    A continuous magnetostratigraphic signature of Layer 2A from Jurassic Quiet Zone (JQZ) oceanic crust now is known from two separate paleo-magnetic data sets. Measurement/demagnetization along the length of the entire core at 5-cm intervals generated ~100,000 data points, whereas a suite of 472 discrete samples also were taken from throughout the core. Both data sets display the same magnetization pattern, a series of repeated sinusoidal inclination changes downhole. Six inter-vals of maximum inclination (three positive, three negative) are obser-ved. Maximum inclination intervals of +/-40° are separated by regions of smoothly varying intermediate inclination values. Despite lack of azmuithal orientation of the core, downhole magnetic logging (Larson et al., in prep.) shows full ~360° directional change in the magnetization vector. Therefore, the maximum inclination regions represent polarity intervals of the geomagnetic field, and six polarity intervals in stacked sequence are contained in the upper 400 m thickness of Layer 2A at this site. The time duration spanned by these six reversals was estimated from recent seismic studies of young ocean crustal construction on the East Pacific Rise (EPR). Estimates of completion of construction of Layer 2A within 1-3 km from the rise crest and typical EPR half-spreading rates of 5-8 cm/yr suggest that the studied 400 m of ocean crust represents 37,000-60,000 years. The fast construction of EPR crust implies that the Middle Jurassic geomagnetic field was reversing at a phenomenal rate of 5000-10,000 years. These data establish that the `quiet' signature in the oldest portion of the lineated magnetic anomaly patterns in the ocean crust is due to exceedingly rapid reversals of the geomagnetic field, because succes-sive, superposed opposite-polarity magnetic signatures will essentially cancel one another out at the sea surface. The width of the 'quiet' magnetic signature in the western Pacific Ocean implies that the 5000

  1. TRANSITION FROM CARBONATE PLATFORM TO PELAGIC DEPOSITION (MID JURASSIC- LATE CRETACEOUS, VOURINOS MASSIF, NORTHERN GREECE

    Directory of Open Access Journals (Sweden)

    NICOLAOS CARRAS

    2004-03-01

    Full Text Available A Jurassic- Cretaceous carbonate succession crops out along the Zyghosti Rema, Kozani (Northern Greece. The substratum consists of the ophiolitic succession of the Vourinos Massif (Pelagonian Domain: serpentinites tectonically overlain by basalts, with thin lenses of radiolarian cherts of middle Bathonian age. The contact with the overlying Jurassic limestones is tectonic. Eight informal units have been distinguished within the Mesozoic limestones, from the base upwards. (A bioclastic, intraclastic and oolitic packstone (Callovian- Oxfordian. (B bioclastic packstone and coral boundstone (Oxfordian . (C bioclastic and oncoidal wackestone with Clypeina jurassica (Oxfordian- Upper Kimmeridgian. (D (Upper Kimmeridgian- Portlandian: oncoidal packstone and rudstone (facies D1; intraclastic and bioclastic grainstone and packstone (facies D2; neptunian dykes with intraclastic and bioclastic wackestone and packstone filling (facies D3; neptunian dykes with Fe-Mn rich laterite filling and with pink silty filling of early Late Cretaceous age. An unconformity surface, due to emersion and erosion of the platform during the latest Jurassic- Early Cretaceous, is overlain by (E intraclastic, bioclastic packstone and grainstone (Cenomanian. (F massive body of debrites with coral, echinoderm, algae and rudist large clasts (facies F1 (Cenomanian; turbiditic beds of bioclastic, intraclastic and lithoclastic rudstone and grainstone (facies F2. (G thin bedded bioclastic mudstone and wackestone with planktonic foraminifers and radiolarians, alternating with turbiditic beds of bioclastic, intraclastic packstone and rudstone and with conglomeratic levels and slumped beds of the previous turbidites (upper Santonian- lower Campanian. (H: bioclastic packstone with planktonic foraminifers (facies H1 (lower Campanian - ?Maastrichtian; amalgamated turbiditic beds of bioclastic wackestone and packstone with planktonic foraminifers (facies H2; turbiditic beds of bioclastic

  2. The Jurassic of Denmark and Greenland: Late Triassic – Jurassic development of the Danish Basin and the Fennoscandian Border Zone, southern Scandinavia

    Directory of Open Access Journals (Sweden)

    Nielsen, Lars Henrik

    2003-10-01

    Full Text Available The continental to marine Upper Triassic – Jurassic succession of the Danish Basin and the Fennoscandian Border Zone is interpreted within a sequence stratigraphic framework, and the evolution of the depositional basin is discussed. The intracratonic Permian–Cenozoic Danish Basin was formed by Late Carboniferous – Early Permian crustal extension followed by subsidence governed primarily by thermal cooling and local faulting. The basin is separated from thestable Precambrian Baltic Shield by the Fennoscandian Border Zone, and is bounded by basement blocks of the Ringkøbing–Fyn High towards the south. In Late Triassic – Jurassic times, the basin was part of the epeiric shallow sea that covered most of northern Europe. The Upper Triassic – Jurassic basin-fill is subdivided into two tectono-stratigraphic units by a basinwide intra-Aalenian unconformity. The Norian – Lower Aalenian succession was formed under relative tectonic tranquillity and shows an overall layer-cake geometry, except for areas with local faults and salt movements.Deposition was initiated by a Norian transgression that led to shallow marine deposition and was accompanied by a gradual climatic change to more humid conditions. Extensive sheets of shoreface sand and associated paralic sediments were deposited during short-lived forced regressions in Rhaetian time. A stepwise deepening and development of fully marine conditions followed in the Hettangian – Early Sinemurian. Thick uniform basinwide mud blankets weredeposited on an open storm-influenced shelf, while sand was trapped at the basin margins. This depositional pattern continued until Late Toarcian – Early Aalenian times when the basin became restricted due to renewed uplift of the Ringkøbing–Fyn High. In Middle Aalenian – Bathonian times, the former basin area was subjected to deep erosion, and deposition became restricted to the fault-bounded Sorgenfrei–Tornquist Zone. Eventually the fault margins

  3. Petrofacies, provenance and diagenesis of the dhosa sandstone member (Chari Formation) at Ler, Kachchh sub-basin, Western India

    Science.gov (United States)

    Ahmad, A. H. M.; Bhat, G. M.

    2006-10-01

    The sandstones of the Dhosa Sandstone Member of Late Callovian and Early Oxfordian age exposed at Ler have been analyzed for their petrofacies, provenance, tectonic setting and diagenetic history. These sandstones are fine to medium grained and poorly- to well sorted. The constituent mineral grains are subangular to subrounded. These sandstones were derived from a mixed provenance including granites, granite-gneisses, low- and high-grade metamorphic and some basic rocks of the Aravalli Range and Nagarparkar Massif. The petrofacies analysis reveals that these sandstones belong to the continental block-, recycled orogen- and rifted continental margin tectonic regime. The imprints of early and deep burial diagenesis of these sandstones include different stages of compaction, cementation, change in crystal boundaries, cement-cement boundaries, chertification and neomorphism. The sequence of cementation includes precipitation of calcite and its subsequent replacement by Fe calcite and silica cements. The typical intermediate burial (2-3 km depth) diagenetic signatures of these sandstones are reflected in the formation of suture and straight-line boundaries, and triple junctions with straight-line boundaries. The depositional environment, relatively low-energy environment that was below storm wave base but subjected to gentle currents, of the Dhosa Sandstone Member controlled the early diagenesis, which in turn influenced the burial diagenesis of these sandstones.

  4. Sedimentary and petrofacies analyses of the Amasiri Sandstone, southern Benue Trough, Nigeria: Implications for depositional environment and tectonic provenance

    Science.gov (United States)

    Okoro, A. U.; Igwe, E. O.; Nwajide, C. S.

    2016-11-01

    This study was undertaken to determine the depositional environment, provenance and tectonic setting for the Turonian Amasiri Sandstone, southern Benue Trough, Nigeria, using lithofacies analysis and re-appraisal of petrography of the sandstones. Local stratigraphy and field relationships show a thick succession of shales alternating with elongate/parallel sandstone ridges extending eastwards from Akpoha to Amasiri through Itigidi and Ugep to Apiapum areas. Lithofacies analysis reveals 9 lithofacies suggestive of storm (mass flow) and tidal shelf processes. These include dark grey to black laminated shale/silty mudstones, bioturbated mudstones, coquinoid limestones, very fine-grained bioturbated sandstones with shell hash/debris in places and limestone rip-up clasts, massive and chaotic sandy conglomerate with rip - up clasts, fine to medium-grained, parallel laminated sandstone, hummocky cross-stratified, massive, medium to coarse-grained sandstones, medium to very coarse-grained, planar cross-bedded sandstone, with clay-draped foresets and Ophiomorpha burrows, and coarse-grained trough cross-bedded sandstone. Petrofacies analysis identifies the sandstones as feldspathic and arkosic arenites. Ternary plot of framework mineralogy indicates derivation from an uplifted continental block related to the nearby Oban Massif and Cameroon Basement Complex.

  5. Estimation of uranium migration parameters in sandstone aquifers.

    Science.gov (United States)

    Malov, A I

    2016-03-01

    The chemical composition and isotopes of carbon and uranium were investigated in groundwater samples that were collected from 16 wells and 2 sources in the Northern Dvina Basin, Northwest Russia. Across the dataset, the temperatures in the groundwater ranged from 3.6 to 6.9 °C, the pH ranged from 7.6 to 9.0, the Eh ranged from -137 to +128 mV, the total dissolved solids (TDS) ranged from 209 to 22,000 mg L(-1), and the dissolved oxygen (DO) ranged from 0 to 9.9 ppm. The (14)C activity ranged from 0 to 69.96 ± 0.69 percent modern carbon (pmC). The uranium content in the groundwater ranged from 0.006 to 16 ppb, and the (234)U:(238)U activity ratio ranged from 1.35 ± 0.21 to 8.61 ± 1.35. The uranium concentration and (234)U:(238)U activity ratio increased from the recharge area to the redox barrier; behind the barrier, the uranium content is minimal. The results were systematized by creating a conceptual model of the Northern Dvina Basin's hydrogeological system. The use of uranium isotope dating in conjunction with radiocarbon dating allowed the determination of important water-rock interaction parameters, such as the dissolution rate:recoil loss factor ratio Rd:p (a(-1)) and the uranium retardation factor:recoil loss factor ratio R:p in the aquifer. The (14)C age of the water was estimated to be between modern and >35,000 years. The (234)U-(238)U age of the water was estimated to be between 260 and 582,000 years. The Rd:p ratio decreases with increasing groundwater residence time in the aquifer from n × 10(-5) to n × 10(-7) a(-1). This finding is observed because the TDS increases in that direction from 0.2 to 9 g L(-1), and accordingly, the mineral saturation indices increase. Relatively high values of R:p (200-1000) characterize aquifers in sandy-clayey sediments from the Late Pleistocene and the deepest parts of the Vendian strata. In samples from the sandstones of the upper part of the Vendian strata, the R:p value is ∼ 24, i.e., sorption processes are

  6. Interaction of oil components and clay minerals in reservoir sandstones

    Energy Technology Data Exchange (ETDEWEB)

    Changchun Pan; Linping Yu; Guoying Sheng; Jiamo Fu [Chinese Academy of Sciences, State Key Lab. of Organic Geochemistry, Wushan, Guangzhou (China); Jianhui Feng; Yuming Tian [Chinese Academy of Sciences, State Key Lab. of Organic Geochemistry, Wushan, Guangzhou (China); Zhongyuan Oil Field Co., Puyang, Henan (China); Xiaoping Luo [Zhongyuan Oil Field Co., Puyang, Henan (China)

    2005-04-15

    The free oil (first Soxhlet extract) and adsorbed oil (Soxhlet extract after the removal of minerals) obtained from the clay minerals in the <2 {mu}m size fraction as separated from eight hydrocarbon reservoir sandstone samples, and oil inclusions obtained from the grains of seven of these eight samples were studied via GC, GC-MS and elemental analyses. The free oil is dominated by saturated hydrocarbons (61.4-87.5%) with a low content of resins and asphaltenes (6.0-22.0% in total) while the adsorbed oil is dominated by resins and asphaltenes (84.8-98.5% in total) with a low content of saturated hydrocarbons (0.6-9.5%). The inclusion oil is similar to the adsorbed oil in gross composition, but contains relatively more saturated hydrocarbons (16.87-31.88%) and less resins and asphaltenes (62.30-78.01% in total) as compared to the latter. Although the amounts of both free and adsorbed oils per gram of clay minerals varies substantially, the residual organic carbon content in the clay minerals of the eight samples, after the free oil extraction, is in a narrow range between 0.537% and 1.614%. From the decrease of the percentage of the extractable to the total of this residual organic matter of the clay minerals with burial depth it can be inferred that polymerization of the adsorbed polar components occurs with the increase of the reservoir temperature. The terpane and sterane compositions indicate that the oil adsorbed onto the clay surfaces appears to be more representative of the initial oil charging the reservoir than do the oil inclusions. This phenomenon could possibly demonstrate that the first oil charge preferentially interacts with the clay minerals occurring in the pores and as coatings around the grains. Although the variation of biomarker parameters between the free and adsorbed oils could be ascribed to the compositional changes of oil charges during the filling process and/or the differential maturation behaviors of these two types of oils after oil

  7. Factors controlling reservoir quality in tertiary sandstones and their significance to geopressured geothermal production. Annual report, May 1, 1979-May 31, 1980

    Energy Technology Data Exchange (ETDEWEB)

    Loucks, R.G.; Richmann, D.L.; Milliken, K.L.

    1980-07-01

    Differing extents of diagenetic modification is the factor primarily responsible for contrasting regional reservoir quality of Tertiary sandstones from the Upper and Lower Texas Gulf Coast. Detailed comparison of Frio sandstones from the Chocolate Bayou/Danbury Dome area, Brazoria County, and Vicksburg sandstones from the McAllen Ranch Field area, Hidalgo County, reveals that extent of diagenetic modification is most strongly influenced by (1) detrital mineralogy and (2) regional geothermal gradients. Vicksburg sandstones from the McAllen Ranch Field area are less stable, chemically and mechanically, than Frio sandstones from the Chocolate Bayou/Danbury dome area. Vicksburg sandstones are mineralogically immature and contain greater proportions of feldspars and rock fragments than do Frio sandstones. Thr reactive detrital assemblage of Vicksubrg sandstones is highly susceptible to diagenetic modification. Susceptibility is enhanced by higher than normal geothermal gradients in the McAllen Ranch Field area. Thus, consolidation of Vicksburg sandstones began at shallower depth of burial and precipitation of authigenic phases (especially calcite) was more pervasive than in Frio sandstones. Moreover, the late-stage episode of ferroan calcite precipitation that occluded most secondary porosity in Vicksburg sandstones did not occur significantly in Frio sandstones. Therefore, regional reservoir quality of Frio sandstones from Brazoria County is far better than that characterizing Vicksburg sandstones from Hidalgo County, especially at depths suitable for geopressured geothermal energy production.

  8. Diagenetic history of Early Cambrian sandstones, at Gazouieyeh outcrop, Central Iran

    Directory of Open Access Journals (Sweden)

    Mohammadreza Ghotbi

    2015-01-01

    Full Text Available The siliciclastic Dahu Strata (Early Cambrian, in the Central Iran, 280 metres thick, in the Gazouieyeh area, rests with an erosional surface on Protrozoic-Early Cambrian sedimentary rocks (Dezu Series. This strata disconformably overlain by Middle Cambrian-Late Cambrian marine carbonate rockse (Kouh-Banan Formation. Based on field and Laboratory studies, 3 association facies, shale-sandstone and conglomerate have been identified. Mainly, sandstones are rich in quartz, feldspars, and rarely contain rock fragments (metamorphic and sedimentary. The sandstones have a wide compositional range from quartzarenite to arkose, feldspathic litharenite and rarely litharenite (chertarenite. According to plots of feldspar garins, total quartzose grains, and total unstable lithic fragments, they were derived from craton interior, transitional continental, and recycled orogen sources. The Dahu sandstones experienced diagenetic events that included compaction and pressure solution, cementation (mostly by silica, carbonate, Fe-oxide, clay and rarely by barite, grain fracturing, alteration of unstable grains, dissolution and replacement. Based on petrological and geochemical studies, we interpreted the diagenetic history for the Dahu sandstones, which consists of early, deep burial and late stages. The above results are based on surface studies, but it might be changed during increasing the depth.

  9. Stratigraphy and petroleum potential of Trout Creek and Twentymile sandstones (Upper Cretaceous), Sand Wash Basin, Colorado

    Energy Technology Data Exchange (ETDEWEB)

    Siepman, B.R.

    1985-05-01

    The Trout Creek and Twentymile Sandstones (Mesaverde Group) in Moffat and Routt Counties, Colorado, are thick, upward-coarsening sequences that were deposited along the western margin of the Western Interior basin during Campanian time. These units trend northeast-southwest and undergo a facies change to coal-bearing strata on the northwest. Surface data collected along the southeastern rim of the Sand Wash basin were combined with well-log data from approximately 100 drill holes that have penetrated the Trout Creek or Twentymile in the subsurface. The sandstones exhibit distinctive vertical profiles with regard to grain size, sedimentary structures, and biogenic structures. A depositional model that incorporates the key elements of the modern Nile River (northeast Africa) and Nayarit (west-central Mexico) coastal systems is proposed for the Trout Creek and Twentymile sandstones and associated strata. The model depicts a wave-dominated deltaic, strand-plain, and barrier-island system. Depositional cycles are asymmetrical in cross section as they are largely progradational and lack significant transgressive deposits. Source rock-reservoir rock relationships are ideal as marine shales underlie, and coal-bearing strata overlie sheetlike reservoir sandstones. Humic coal, the dominant source of Mesaverde gas, generates major quantities of methane upon reaching thermal maturity. Existing Mesaverde gas fields are largely structural traps, but stratigraphic and combination traps may prove to be equally important. The sparsely drilled deeper part of the basin warrants testing as large, overpressured-gas accumulations in tight-sandstone reservoirs are likely to be found.

  10. Paleomagnetism of Jurassic and Cretaceous rocks bounding the Santa Marta massif - NW corner of Colombia, South America

    Science.gov (United States)

    Bayona, G.; Jimenez, G.; Silva, C.

    2008-12-01

    The Santa Marta massif (SMM) is a complex terrain located in the NW margin of South America, bounded by the left-lateral Santa Marta fault to the west and the right-lateral Oca fault to the north. The SMM is cored by Precambrian metamorphic and Jurassic intrusive rocks, whereas along the SE flank crop out Jurassic volcanic rocks overlying unconformably by Limestones of Cretaceous age. Paleomagnetic analysis of 30 sites in the Jurassic and Cretaceous units in the SE region uncovered two principal magnetic components. The component "a", isolated in low coercivity and temperatures, has declinations to the north and moderate positive inclinations representing the actual field direction (n=11, D=347.6 I=23 K=30.77, a95=8.4). The component "c", with high coercivity and temperatures, has two orientations. After two-step tilt corrections, the first has northward declination and positive, low inclination (n=9, D=12, I=3, K=18.99, a95=12.1); this direction was uncovered in Cretaceous and some Jurassic rocks near to the Santa Marta fault, and we consider it as a Cretaceous component. The second direction was uncovered only in Jurassic rocks and has NNE declinations with negative-low inclinations (n=9, D=11.3 I=-14.3 K=12.36, a95=15.2); this direction represents a Jurassic component. Jurassic and Cretaceous directions isolated in areas faraway of the Santa Marta Fault suggest slight clockwise vertical-axes rotation. The Jurassic component suggests northward translation of the SMM from Paleolatitude -7.3, to near the magnetic equador in the Cretaceous, and to northern latitudes in the Cenozoic.

  11. MIDDLE JURASSIC-LOWER CRETACEOUS BIOSTRATIGRAPHY IN THE CENTRAL PONTIDES (TURKEY): REMARKS ON PALEOGEOGRAPHY AND TECTONIC EVOLUTION

    OpenAIRE

    BORA ROJAY; DEMIR ALTINER

    1998-01-01

    The deposition of Jurassic-Lower Cretaceous carbonates in the Pontides was controlled mainly by the evolution of an Atlantic-type continental margin in the Tethys. The study of several stratigraphic sections from allochthonous slices and blocks of the North Anatolian Ophiolitic Melange provided insight into the Middle Jurassic-Early Cretaceous paleogeographic evolution of the Central Pontide Belt. The Callovian-Aptian successions span the Globuligerina gr. oxfordiana, Clypeina jurassica (equi...

  12. A Remarkable New Family of Jurassic Insects (Neuroptera) with Primitive Wing Venation and Its Phylogenetic Position in Neuropterida

    OpenAIRE

    Qiang Yang; Vladimir N Makarkin; Winterton, Shaun L.; Khramov, Alexander V.; Dong Ren

    2012-01-01

    BACKGROUND: Lacewings (insect order Neuroptera), known in the fossil record since the Early Permian, were most diverse in the Mesozoic. A dramatic variety of forms ranged in that time from large butterfly-like Kalligrammatidae to minute two-winged Dipteromantispidae. PRINCIPAL FINDINGS: We describe the intriguing new neuropteran family Parakseneuridae fam. nov. with three new genera and 15 new species from the Middle Jurassic of Daohugou (Inner Mongolia, China) and the Early/Middle Jurassic o...

  13. Dinosaur tracks in Lower Jurassic coastal plain sediments (Sose Bugt Member, Rønne Formation) on Bornholm, Denmark

    DEFF Research Database (Denmark)

    Clemmensen, Lars B; Milàn, Jesper; Pedersen, Gunver K

    2014-01-01

    Fluvial palaeochannels of coastal plain sediments of the Lower Jurassic Sose Bugt Member of the Rønne Formation exposed in the coastal cliffs at Sose Bugt, Bornholm, contain abundant dinosaur or other large vertebrate tracks in the form of deformation structures exposed in vertical section...... track. Contemporary Upper Triassic – Lower Jurassic strata from southern Sweden and Poland contain a diverse track fauna, supporting our interpretation. This is the earliest evidence of dinosaur activity in Denmark....

  14. The first euthemistid damsel-dragonfly from the Middle Jurassic of China (Odonata, Epiproctophora, Isophlebioptera).

    Science.gov (United States)

    Li, Yongjun; Nel, André; Shih, Chungkun; Ren, Dong; Pang, Hong

    2013-01-01

    Sinoeuthemis daohugouensis gen. et sp. n. is the first record of the isophlebiopteran family Euthemistidae from Middle Jurassic of northeast China, while previously this family was restricted to the early Late Jurassic Kazakhstan. This new finding allows us to emend the family diagnosis with hindwing characters. This new species shows a mixture of characters alternatively present in different genera of the two families Euthemistidae and Sphenophlebiidae.

  15. Dinosaur evolution. A Jurassic ornithischian dinosaur from Siberia with both feathers and scales.

    Science.gov (United States)

    Godefroit, Pascal; Sinitsa, Sofia M; Dhouailly, Danielle; Bolotsky, Yuri L; Sizov, Alexander V; McNamara, Maria E; Benton, Michael J; Spagna, Paul

    2014-07-25

    Middle Jurassic to Early Cretaceous deposits from northeastern China have yielded varied theropod dinosaurs bearing feathers. Filamentous integumentary structures have also been described in ornithischian dinosaurs, but whether these filaments can be regarded as part of the evolutionary lineage toward feathers remains controversial. Here we describe a new basal neornithischian dinosaur from the Jurassic of Siberia with small scales around the distal hindlimb, larger imbricated scales around the tail, monofilaments around the head and the thorax, and more complex featherlike structures around the humerus, the femur, and the tibia. The discovery of these branched integumentary structures outside theropods suggests that featherlike structures coexisted with scales and were potentially widespread among the entire dinosaur clade; feathers may thus have been present in the earliest dinosaurs.

  16. An enigmatic plant-eating theropod from the Late Jurassic period of Chile.

    Science.gov (United States)

    Novas, Fernando E; Salgado, Leonardo; Suárez, Manuel; Agnolín, Federico L; Ezcurra, Martín D; Chimento, Nicolás R; de la Cruz, Rita; Isasi, Marcelo P; Vargas, Alexander O; Rubilar-Rogers, David

    2015-06-18

    Theropod dinosaurs were the dominant predators in most Mesozoic era terrestrial ecosystems. Early theropod evolution is currently interpreted as the diversification of various carnivorous and cursorial taxa, whereas the acquisition of herbivorism, together with the secondary loss of cursorial adaptations, occurred much later among advanced coelurosaurian theropods. A new, bizarre herbivorous basal tetanuran from the Upper Jurassic of Chile challenges this conception. The new dinosaur was discovered at Aysén, a fossil locality in the Upper Jurassic Toqui Formation of southern Chile (General Carrera Lake). The site yielded abundant and exquisitely preserved three-dimensional skeletons of small archosaurs. Several articulated individuals of Chilesaurus at different ontogenetic stages have been collected, as well as less abundant basal crocodyliforms, and fragmentary remains of sauropod dinosaurs (diplodocids and titanosaurians).

  17. Reduced plumage and flight ability of a new Jurassic paravian theropod from China.

    Science.gov (United States)

    Godefroit, Pascal; Demuynck, Helena; Dyke, Gareth; Hu, Dongyu; Escuillié, François; Claeys, Philippe

    2013-01-01

    Feathered theropods were diverse in the Early Cretaceous Jehol Group of western Liaoning Province, China. Recently, anatomically distinct feathered taxa have been discovered in the older Middle-Late Jurassic Tiaojishan Formation in the same region. Phylogenetic hypotheses including these specimens have challenged the pivotal position of Archaeopteryx in bird phylogeny. Here we report a basal troodontid from the Tiaojishan Formation that resembles Anchiornis, also from Jianchang County (regarded as sister-taxa). The feathers of Eosinopteryx are less extensive on the limbs and tail than Anchiornis and other deinonychosaurians. With reduced plumage and short uncurved pedal claws, Eosinopteryx would have been able to run unimpeded (with large foot remiges cursorial locomotion was likely problematic for Anchiornis). Eosinopteryx increases the known diversity of small-bodied dinosaurs in the Jurassic, shows that taxa with similar body plans could occupy different niches in the same ecosystem and suggests a more complex picture for the origin of flight.

  18. A bizarre Jurassic maniraptoran from China with elongate ribbon-like feathers.

    Science.gov (United States)

    Zhang, Fucheng; Zhou, Zhonghe; Xu, Xing; Wang, Xiaolin; Sullivan, Corwin

    2008-10-23

    Recent coelurosaurian discoveries have greatly enriched our knowledge of the transition from dinosaurs to birds, but all reported taxa close to this transition are from relatively well known coelurosaurian groups. Here we report a new basal avialan, Epidexipteryx hui gen. et sp. nov., from the Middle to Late Jurassic of Inner Mongolia, China. This new species is characterized by an unexpected combination of characters seen in several different theropod groups, particularly the Oviraptorosauria. Phylogenetic analysis shows it to be the sister taxon to Epidendrosaurus, forming a new clade at the base of Avialae. Epidexipteryx also possesses two pairs of elongate ribbon-like tail feathers, and its limbs lack contour feathers for flight. This finding shows that a member of the avialan lineage experimented with integumentary ornamentation as early as the Middle to Late Jurassic, and provides further evidence relating to this aspect of the transition from non-avian theropods to birds.

  19. The oldest haplogyne spider (Araneae: Plectreuridae), from the Middle Jurassic of China

    Science.gov (United States)

    Selden, Paul A.; Huang, Diying

    2010-05-01

    New fossil spiders (Arachnida: Araneae) from Middle Jurassic (ca. 165 Ma) strata of Daohugou, Inner Mongolia, China are described as Eoplectreurys gertschi gen. et sp. nov. and referred to the modern haplogyne family Plectreuridae. This small family is restricted to southwestern USA, Mexico, and the adjacent Caribbean area today and hitherto has only a sparse Cenozoic fossil record. The morphology of Eoplectreurys is remarkably similar to modern forms and thus demonstrates great evolutionary conservatism. This new discovery not only extends the fossil record of the family by at least 120 Ma to the Middle Jurassic but also supports the hypothesis of a different distribution of the family in the past than today and subsequent extinction over much of its former range.

  20. Uppermost Jurassic-Lower Cretaceous carbonate deposits from Fara San Martino (Maiella, Italy: biostratigraphic remarks

    Directory of Open Access Journals (Sweden)

    Roberta Bruni

    2007-10-01

    Full Text Available The Uppermost Jurassic-Lower Cretaceous limestone succession in the Maiella region of Italy has been investigated in a profile covering more than 400 m stratigraphical thickness at Fara San Martino. The succession mainly consists of peritidal limestones, intertidal and supratidal sequences being dominant, together with subtidal lagoonal facies. As a consequence, the microfossil assemblages are generally poorly developed, Microfossils occur within the subtidal lagoonal facies of this suite of restricted sediments. This feature led us to recognise five informal biostratigraphic intervals, which are facies related – instead of biozones, each of the intervals being characterized by specific micropaleontological associations. The occurrence and/or disappearance of some marker microfossils were used as references for separating these intervals. Based on these markers, the Uppermost Jurassic-Lower Cretaceous carbonate deposits from Maiella region may be correlated with similar deposits from the Apennines and from other regions in the perimediterranean area.

  1. The Requel: Between the Remake and the Sequel. Jurassic World as a Case Study Analysis

    Directory of Open Access Journals (Sweden)

    Irene RAYA BRAVO

    2017-06-01

    Full Text Available In the audiovisual field, the expansion of the stories is, specifically, materialized through remakes, adaptations and franchises. In this context, the remakes or new versions are recurrent formulas because they recover familiar contents for audiences and, at the same time, they reinvent it in order to capture new generations’ attention. Nevertheless, the remake formula has been changing in the new millennium, adapting to new narrative trends. In recent years, because of the rise of intertextuality and the increasing value of nostalgia, many films have been produced halfway between the remake and the sequel, such as Star Wars. Episode VII: The Force Awakens or Terminator Genisys. In particular, the aim of this paper is to make a comparative analysis between Jurassic Park and Jurassic World because, although this last film extends the original discourse as a sequel, it also offers a reinterpretation of the first film.

  2. New evidence of shared dinosaur across Upper Jurassic Proto-North Atlantic: Stegosaurus from Portugal

    Science.gov (United States)

    Escaso, Fernando; Ortega, Francisco; Dantas, Pedro; Malafaia, Elisabete; Pimentel, Nuno L.; Pereda-Suberbiola, Xabier; Sanz, José Luis; Kullberg, José Carlos; Kullberg, María Carla; Barriga, Fernando

    2007-05-01

    More than one century after its original description by Marsh in 1877, we report in this paper the first uncontroversial evidence of a member of the genus Stegosaurus out of North America. The specimen consists of a partial skeleton from the Upper Jurassic of Portugal, herein considered as Stegosaurus cf. ungulatus. The presence of this plated dinosaur in the upper Kimmeridgian-lower Tithonian Portuguese record and synchronic levels of the Morrison Formation of North America reinforces previous hypothesis of a close relationship between these two areas during the Late Jurassic. This relationship is also supported by geotectonic evidences indicating high probability of an episodic corridor between the Newfoundland and Iberian landmasses. Together, Portuguese Stegosaurus discovery and geotectonic inferences could provide a scenario with episodical faunal contact among North Atlantic landmasses during the uppermost Kimmeridgian-lowermost Tithonian (ca. 148-153 Ma ago).

  3. Paleogeography of the northern portion of the Mixteca terrain, southern Mexico, during the Middle Jurassic

    Science.gov (United States)

    Caballero-Miranda, C.; Morán-Zenteno, D. J.; Urrutia-Fucugauchi, J.; Silva-Romo, G.; Böhnel, H.; Jurado-Chichay, Z.; Cabral-Cano, E.

    A preliminary paleogeographic reconstruction of the northern Mixteca terrain in southern Mexico is presented for the Middle Jurassic. The reconstruction is derived from combined analyses of spatial distribution of marine-continental Jurassic sedimentary units, identification of sediment source, and observations based on sedimentary indicators of environment and transport directions, as well as paleomagnetic and anisotropy of magnetic susceptibility (AMS) results. There is an overall agreement between the AMS magnetic fabric results and the sedimentary indicators of current directions and paleogeographic elements. The results suggest a coastline at the south-southwest portion of this terrain, a general transport of fluvial sediments to the south and southwest, and marine influxes from the south. A Pacific margin provenance is supported by the paleomagnetic results for the northern portion of the Mixteca terrain.

  4. New fossil record of a Jurassic pterosaur from Neuquen Basin, Vaca Muerta Formation, Argentina

    Science.gov (United States)

    Codorniú, Laura; Garrido, Alberto

    2013-12-01

    Discoveries of Jurassic pterosaurs in the Southern Hemisphere are extremely unusual. In Argentina, pterosaurs from the Upper Jurassic (Tithonian) have only been found in the Northwest of Patagonia (Neuquén Basin). These come from marine deposits and three specimens have been discovered up to the present. In this paper, we report a new finding from the Neuquén Basin. This material is identified as a tibiotarsus, which probably belonged to an osteologically adult individual and represents a new species of a pterodactyloid pterosaur of medium size. This discovery provides new evidence that at least two different species of pterodactyloid pterosaurs may have coexisted in Los Catutos Member, Vaca Muerta Formation, from the shallow marine deposits of the Neuquén Basin.

  5. The oldest known snakes from the Middle Jurassic-Lower Cretaceous provide insights on snake evolution.

    Science.gov (United States)

    Caldwell, Michael W; Nydam, Randall L; Palci, Alessandro; Apesteguía, Sebastián

    2015-01-27

    The previous oldest known fossil snakes date from ~100 million year old sediments (Upper Cretaceous) and are both morphologically and phylogenetically diverse, indicating that snakes underwent a much earlier origin and adaptive radiation. We report here on snake fossils that extend the record backwards in time by an additional ~70 million years (Middle Jurassic-Lower Cretaceous). These ancient snakes share features with fossil and modern snakes (for example, recurved teeth with labial and lingual carinae, long toothed suborbital ramus of maxillae) and with lizards (for example, pronounced subdental shelf/gutter). The paleobiogeography of these early snakes is diverse and complex, suggesting that snakes had undergone habitat differentiation and geographic radiation by the mid-Jurassic. Phylogenetic analysis of squamates recovers these early snakes in a basal polytomy with other fossil and modern snakes, where Najash rionegrina is sister to this clade. Ingroup analysis finds them in a basal position to all other snakes including Najash.

  6. A previously unrecognized group of Middle Jurassic triconodontan mammals from Central Asia

    Science.gov (United States)

    Martin, Thomas; Averianov, Alexander O.

    2007-01-01

    Ferganodon narynensis gen. et sp. nov. is represented by a lower molariform tooth from the Middle Jurassic (Callovian) Balabansai Svita in Kyrgyzstan. The new genus is allied with Klamelia zhaopengi Chow and Rich 1984 from the Middle Jurassic Shishugou Formation in Xinjiang, northwest China to the new family Klameliidae based on parallelogram-shaped lower molariforms, imbricating rather than interlocking of cusps e- d- f, by a peculiar distolabial cingulid cusp, and by vertical folding of the enamel on the labial crown side. The new family Klameliidae fam. nov. is most similar to Gobiconodontidae by the structure of the molariform teeth and represents a previously unrecognized radiation of eutriconodontan mammals possibly endemic to Central Asia.

  7. Distribution patterns of the Jurassic ostreids (Bivalvia) from Tanggula of China

    Institute of Scientific and Technical Information of China (English)

    沙金庚

    2001-01-01

    Distribution of the Jurassic ostreids (Bivalvia) from Tanggula area of China includes three patterns, which are (1) Tethys: containing Liostrea birmanica and Eligmus rollandi, (2) western Europe and northern Tethys: consisting of Gryphaea (Bilobissa) bilobata; and (3) Global: composed of Actinostreon gregareum and Nanogyra nana. However, they are all limited between palaeolatidudes 60° South and North. Actinostreon gregareum originated in the Sinemurian of northern Chile and it entered Kenya and Madagascar in the Toarcian, but there is no reliable Si-nemurian-Toarcian A. gregareum fossil record in continental margins between Chile and Kenya and Madagascar. Such distribution patterns and dispersal processes have demonstrated that (1) during the Jurassic all seas and oceans were connected to each other; (2) the Tethys and the western European epicontinental seas did produce some endemic taxa; (3) the distribution of these ostreids was most likely controlled by latitudes and creature ecology; and (4) A, gr

  8. Natural Gas Resource in Jurassic, Y Faulted Subbasin of Songliao Basin

    Institute of Scientific and Technical Information of China (English)

    Yang Haibo; Hu Yutao; Wei Xinghua

    2000-01-01

    Y faulted depression is located in the southeast of Songliao basin, which is another important area explored for natural gas in deep Formation after Xujiaweizi. But it is lowly explored and is not likely to make a major breakthrough in nature gas exploration for shallow and medium layers. The data on the geochemistry and geology indicate that the deep source rocks, especially the Jurassic mudstone bas great potentials of natural gas generation. Based on this, the paper examines the conditions of natural gas generation and further points out the favorable prospective gas - bearing area. The results show that the amount of natural gas generated from the Jurassic mudstone in the Y faulted depression is 8.42 × 1012m3 and the favorable gas - generating area is the body of the faulted depression.

  9. ENVIRONMENTS AND FAUNAL PATTERNS IN THE KACHCHH RIFT BASIN, WESTERN INDIA, DURING THE JURASSIC

    OpenAIRE

    FRANZ THEODOR FÜRSICH; Callomon, John H.; DHIRENDRA K. PANDEY; ANAND K. JAITLY

    2004-01-01

    Marine Jurassic sediments (Bajocian-Tithonian) of the Kachchh Basin were deposited in a ramp setting. Except during the Middle and Late Bathonian, when a carbonate regime became established, the fill of the basin consists predominantly of siliciclastics. The sediments represent environments that range from coastal plains (rivers and associated flood plains with caliche nodules), deltas, brackish water lagoons, nearshore sand and iron-oolite bars of the inner ramp, generally situated above fai...

  10. A golden orb-weaver spider (Araneae: Nephilidae: Nephila) from the Middle Jurassic of China

    OpenAIRE

    Paul A Selden; Shih, Chungkun; Ren, Dong

    2011-01-01

    Nephila are large, conspicuous weavers of orb webs composed of golden silk, in tropical and subtropical regions. Nephilids have a sparse fossil record, the oldest described hitherto being Cretaraneus vilaltae from the Cretaceous of Spain. Five species from Neogene Dominican amber and one from the Eocene of Florissant, CO, USA, have been referred to the extant genus Nephila. Here, we report the largest known fossil spider, Nephila jurassica sp. nov., from Middle Jurassic (approx. 165 Ma) strat...

  11. Dynamic Paleogeography of the Jurassic Andean Basin: pattern of regression and general considerations on main features

    Directory of Open Access Journals (Sweden)

    J-C. Vicente

    2006-09-01

    Full Text Available Following examination of the evolution of the Jurassic Andean retroarc basin at a global scale for the Central Andes, this paper analyses the pattern of the regressive process, and discusses some general features concerning Andean Jurassic Paleogeography. The early Upper Jurassic regression obeys to an exactly reverse pattern as the one evidenced for the Lower Jurassic transgressive process. Sectors with late transgressions become those with early regressions while those with early transgressions show later regressions. This fact may indicate that the Norte Chico Isthmus (29°S to 30°30'S was a precociously emerged zone from the Bajocian. This carries again a split up between the Tarapacá and Aconcagua-Neuquén basins until their complete drying up in the Late Oxfordian following their restricted circulation. This evaporitic late stage presents great analogy with the Mediterranean «Messinian crisis» and gives evidence of a general tectonic and magmatic control on the straits. The local transgressions observed on the cratonic margin of the central part of these shrinking basins were due to shifting of water masses resulting from the regressive process on the northern and southern margins. Comparison between the main stages of transgression and regression allows some quantification concerning velocities of displacement of coastlines, specifically lengthwise. The permanence of paleogeographic and structural features over the time argues for an indisputable tectonic heritage. In the dynamic framework of this typical barred retroarc basin where arc magmatic activity has contributed considerably to variation on sediment supply and changing bathymetry of the seaways connecting with the Pacific Ocean, evidence for an assumed global eustatic cycle remains questionable or very subordinated.

  12. Jurassic Tectonic Revolution in China and New Interpretation of the "Yanshan Movement"

    Institute of Scientific and Technical Information of China (English)

    DONG Shuwen; ZHANG Yueqiao; LONG Changxing; YANG Zhenyu; JI Qiang; WANG Tao; HU Jianming; CHEN Xuanhua

    2008-01-01

    With acquisition and accumulation of new data of structural geological investigations and high-resolution isotopic dating data, we have greatly improved our understanding of the tectonic events occurring in eastern China during the period from the Late Jurassic to Early Cretaceous and may give a new interpretation of the nature, timing and geodynamic settings of the "Yanshan Movement". During the Mid-Late Jurassic (165±5 Ma), great readjustment of plate amalgamation kinematics took place in East Asia and the tectonic regime underwent great transformation, thus initiating a new tectonic regime in which the North China Block was the center and different plates converged toward it from the north, east and southwest and forming the "East Asia convergent"tectonic system characterized by intracontinental subduction and orogeny. As a consequence, the crustal lithosphere of the East Asian continent thickened considerably during the Late Jurassic,followed immediately by Early Cretaceous substantial lithospheric thinning and craton destruction featured by drastic lithospheric extension and widespread volcano-magmatic activities, resulting in a major biotic turnover from the Yanliao biota to Jehol Biota. Such a tremendous tectonic event that took place in the continent of China and East Asia is the basic connotation of the "Yanshan Movement". In the paper, according to the deformation patterns, geodynamic settings and deep processes, the "Yanshan Movement" is redefined as the Late Jurassic East Asian multi-directional plate convergent tectonic regime and its associated extensive intracontinental orogeny and great tectonic change that started at ~165±5 Ma. The substantial lithospheric attenuation in East China is considered the post-effect of the Yanshanian intracontinental orogeny and deformation.

  13. Element mobility during diagenesis: sulphate cementation of Rotliegend sandstones, Southern North Sea

    Energy Technology Data Exchange (ETDEWEB)

    Gluyas, J. [BP Venezuela, Caracas (Venezuela); Jolley, L.; Primmer, T. [BP Exploration, Aberdeen (United Kingdom)

    1998-11-01

    Several wells in the Amethyst gas field of the North Sea`s Southern Basin are poor producers and have been since they were drilled. The lack of gas flow from these wells is due to pervasive cementation of the Rotliegend sandstone reservoir by either anhydrite and/or barite. Both minerals precipitated late in the diagenetic history of the sandstones. Such cements form up to 20% of the total rock. Isotopic and geochemical evidence indicate that the source of the elements for these sulphate cements was outside the Rotliegend sandstone. The sulphur and oxygen isotope data for the anhydrite and barite are unlike those which could have precipitated in Lower Permian times from an evaporating marine basin. Both the timing and distribution of these cements is taken to indicate that faulting allowed, or indeed promoted, mixing of sulphate-rich and barium-rich formation waters derived from the Zechstein and Carboniferous, respectively. (author)

  14. Petrography and Diagenesis of Palaeocene -Eocene Sandstones in the Siri Canyon, Danish North Sea

    DEFF Research Database (Denmark)

    Kazerouni, Afsoon Moatari

    it is generally associated with thick coatings of opal/microquartz on the detrital framework grains.   This study also presents the occurrence and compositional variance of the authigenic zeolites in the Siri Canyon sandstones, and discusses the physico-chemical conditions, which prevailed during formation...... are microquartz, large syntaxial quartz overgrowth, calcite, and chlorite.    Chlorite forms an intra-reservoir hydrocarbon seal, and our study demonstrates the influence of early diagenetic quartz on the formation of the chlorite seal.  Early opal and microquartz are precipitated close to shale contacts...... and prevent the interaction between abundant detrital glaucony and pore-fluid and thus the formation of grain-coating berthierine.  It also preserves porosity and permeability in marginal and isolated parts of the sandstone. In other parts of the sandstone grain coating berthierine precipitated...

  15. Experimental and Numerical Investigations on Strength and Deformation Behavior of Cataclastic Sandstone

    Science.gov (United States)

    Zhang, Y.; Shao, J. F.; Xu, W. Y.; Zhao, H. B.; Wang, W.

    2015-05-01

    This work is devoted to characterization of the deformation and strength properties of cataclastic sandstones. Before conducting mechanical tests, the physical properties were first examined. These sandstones are characterized by a loose damaged microstructure and poorly cemented contacts. Then, a series of mechanical tests including hydrostatic, uniaxial, and triaxial compression tests were performed to study the mechanical strength and deformation of the sandstones. The results obtained show nonlinear stress-strain responses. The initial microcracks are closed at hydrostatic stress of 2.6 MPa, and the uniaxial compressive strength is about 0.98 MPa. Under triaxial compression, there is a clear transition from volumetric compressibility to dilatancy and a strong dependency on confining pressure. Based on the experimental evidence, an elastoplastic model is proposed using a linear yield function and a nonassociated plastic potential. There is good agreement between numerical results and experimental data.

  16. Diagenesis of Paleogene sandstone from Kong 1 Member of Southern Kongdian in Huanghua depression

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Huanghua depression is one of the richest areas in petroleum and natural gas in China. The Paleogene mainly consists of sandstone with facies of river, delta, fan delta and littoral-shallow lacustrine. Diagenesis played an important role in the properties of reservoir rocks. Applying X-ray diffraction, on the basis of analyzing many cores and thin sections, the authors studied diagenesis of Paleogene sandstone reservoir rocks in kongl Menber of southern Kongdian in Huanghua depression. Diagenetic complexity shows that the sandstone in this area underwent compaction, cementation, isolation, recrystallization during the burying of sediments, and the first three compose the major diagenesis. The compaction and cementation led to decreasing porosity, and the solution of unsteady minerals also results in increasing in porosity.

  17. Monitoring hydrate formation and dissociation in sandstone and bulk with magnetic resonance imaging.

    Science.gov (United States)

    Baldwin, B A; Moradi-Araghi, A; Stevens, J C

    2003-11-01

    Magnetic resonance imaging (MRI) has been shown to be a very effective tool for monitoring the formation and dissociation of hydrates because of the large intensity contrast between the images of the liquid components and the solid hydrate. Tetrahydrofuran/water hydrate was used because the two liquid components are miscible and form hydrate at ambient pressure. These properties made this feasibility study proceed much faster than using methane/water, which requires high pressure to form the hydrate. The formation and dissociation was monitored first in a THF/water-saturated Berea sandstone plug and second in the bulk. In both cases it appeared that nucleation was needed to begin the formation process, i.e., the presence of surfaces in the sandstone and shaking of the bulk solution. Dissociation appeared to be dominated by the rate of thermal energy transfer. The dissociation temperature of hydrate formed in the sandstone plug was not significantly different from the dissociation temperature in bulk.

  18. THE PROTECTION OF JURASSIC SITES AND FOSSILS: CHALLENGES FOR GLOBAL JURASSIC SCIENCE (INCLUDING A PROPOSED STATEMENT ON THE CONSERVATION OF PALAEONTOLOGICAL HERITAGE AND STRATOTYPES

    Directory of Open Access Journals (Sweden)

    KEVIN N. PAGE

    2004-03-01

    Full Text Available Effective geoconservation systems are crucial to the activities of subcommissions of the International Subcommission on Stratigraphy, such as the Jurassic Subcommission (ISJS. Fundamentally, the core activity of any Subcommission, the establishment of Global Stratotype Sections and Points (GSSPs is a conservation activity in itself, involving the selection of key sites, to be maintained as references for subsequent consultation. Without adequate national site protection and management systems this fundamental function is liable to fail as the selected site remains vulnerable to loss and damage. In addition, strict conservation systems applied without adequate understanding of the needs of research and education can also prevent or significantly inhibit geological science and the use of sites such as GSSPs. To address these extreme scenarios and assist the development of a more scientific approach to conservation of geological sites of stratigraphical and palaeontological importance during dialogues with administrative authorities, a Statement defining categories of palaeontological heritage requiring protection and the basic requirements needed to achieve the conservation of stratotype localities is here proposed. The context of the protection of Jurassic sites within other international projects is also reviewed, in particular the IUGS Geosites project, within which all GSSPs will be listed.

  19. A new Jurassic theropod from China documents a transitional step in the macrostructure of feathers

    Science.gov (United States)

    Lefèvre, Ulysse; Cau, Andrea; Cincotta, Aude; Hu, Dongyu; Chinsamy, Anusuya; Escuillié, François; Godefroit, Pascal

    2017-10-01

    Genuine fossils with exquisitely preserved plumage from the Late Jurassic and Early Cretaceous of northeastern China have recently revealed that bird-like theropod dinosaurs had long pennaceous feathers along their hindlimbs and may have used their four wings to glide or fly. Thus, it has been postulated that early bird flight might initially have involved four wings (Xu et al. Nature 421:335-340, 2003; Hu et al. Nature 461:640-643, 2009; Han et al. Nat Commun 5:4382, 2014). Here, we describe Serikornis sungei gen. et sp. nov., a new feathered theropod from the Tiaojishan Fm (Late Jurassic) of Liaoning Province, China. Its skeletal morphology suggests a ground-dwelling ecology with no flying adaptations. Our phylogenetic analysis places Serikornis, together with other Late Jurassic paravians from China, as a basal paravians, outside the Eumaniraptora clade. The tail of Serikornis is covered proximally by filaments and distally by slender rectrices. Thin symmetrical remiges lacking barbules are attached along its forelimbs and elongate hindlimb feathers extend up to its toes, suggesting that hindlimb remiges evolved in ground-dwelling maniraptorans before being co-opted to an arboreal lifestyle or flight.

  20. Discovery of a short-necked sauropod dinosaur from the Late Jurassic period of Patagonia.

    Science.gov (United States)

    Rauhut, Oliver W M; Remes, Kristian; Fechner, Regina; Cladera, Gerardo; Puerta, Pablo

    2005-06-01

    Sauropod dinosaurs are one of the most conspicuous groups of Mesozoic terrestrial vertebrates. They show general trends towards an overall increase in size and elongation of the neck, by means of considerable elongation of the length of individual vertebrae and a cervical vertebra count that, in some cases, increases to 19 (ref. 1). The long neck is a particular hallmark of sauropod dinosaurs and is usually regarded as a key feeding adaptation. Here we describe a new dicraeosaurid sauropod, from the latest Jurassic period of Patagonia, that has a particularly short neck. With a neck that is about 40% shorter than in other known dicraeosaurs, this taxon demonstrates a trend opposite to that seen in most sauropods and indicates that the ecology of dicraeosaurids might have differed considerably from that of other sauropods. The new taxon indicates that there was a rapid radiation and dispersal of dicraeosaurids in the Late Jurassic of the Southern Hemisphere, after the separation of Gondwana from the northern continents by the late Middle Jurassic.

  1. Timing, duration, and causes for Late Jurassic-Early Cretaceous anoxia in the Barents Sea

    Science.gov (United States)

    Georgiev, Svetoslav V.; Stein, Holly J.; Hannah, Judith L.; Xu, Guangping; Bingen, Bernard; Weiss, Hermann M.

    2017-03-01

    Re-Os isochron ages for black shales of the Hekkingen Formation in the Barents Sea constrain the onset (157.7 ± 1.3 Ma) and termination (138.8 ± 1.0 Ma), and thereby indicate a long duration (∼19 Myr) of widespread Jurassic-Cretaceous anoxia in the Arctic. Integration of these new Re-Os ages with published radiometric ages, ammonite biostratigraphy and geomagnetic polarity chrons shows shorter late Oxfordian-late Kimmeridgian and longer Berriasian stages relative to estimates in the 2012 and 2016 Geological Time Scales. Late Jurassic anoxia was likely the result of warming climate due to high atmospheric CO2 levels from increased oceanic crust production. Rising temperatures enhanced weathering and nutrient supply, increased productivity, and slowed ocean circulation before a sea-level rise brought anoxic waters onto continental shelves. Assessment of new and published Os- and Sr-isotopic data suggests that prolonged oceanic anoxia required a sustained CO2 source from fast spreading rates and/or longer subduction zones and spreading ridges to balance large burial of carbon in voluminous Upper Jurassic and Lower Cretaceous black shales.

  2. Bajocian-Bathonian (Middle Jurassic) sea-level changes in northeastern Egypt: Synthesis and further implications

    Science.gov (United States)

    Ruban, Dmitry A.; Sallam, Emad S.

    2016-08-01

    The global eustatic developments can benefit significantly from properly acquired regional information. Summarizing the available interpretations of the relative sea-level changes from two areas in northeastern Egypt, namely Gebel Maghara and Khashm El-Galala, allows better understanding of the Middle Jurassic sea-level changes. It is established that the Bajocian-Bathonian relative sea-level changes in these areas were coherent. The magnitude of changes was lower in the Bajocian than in the Bathonian. Significant sea-level rises occurred at the Bajocian-Bathonian and middle-late Bathonian transitions, and there was a clear tendency toward sea-level rise throughout the studied time interval. This evidence favors one of the two alternative global eustatic reconstructions that implies "stable" position of the shoreline in the Bajocian and general tendency to eustatic rise throughout the Jurassic. The tectonic regime of northeastern Egypt in the Middle Jurassic provided for strong eustatic control of the relative sea-level changes. The possible influence of hotspot activity is questionable. Filling the accommodation space with materials derived from the eroded continent may explain some sea-level falls that are regionally documented.

  3. Triassic-Jurassic organic carbon isotope stratigraphy of key sections in the western Tethys realm (Austria)

    Science.gov (United States)

    Ruhl, Micha; Kürschner, Wolfram M.; Krystyn, Leopold

    2009-05-01

    The late Triassic period is recognized as one of the five major mass extinctions in the fossil record. All these important intervals in earth history are associated with excursions in C-isotope records thought to have been caused by perturbations in the global carbon cycle. The nature and causes of C-isotopic events across the Triassic-Jurassic (T-J) transition however, are poorly understood. We present several new high resolution organic C-isotope records from the Eiberg Basin, Austria, including the proposed Global boundary Stratotype Section and Point (GSSP) for the base of the Jurassic. The Triassic-Jurassic boundary interval in these records is characterized by the initial and main negative organic carbon isotope excursions (CIE) of up to 8‰. The initial and main CIEs are biostratigraphically constrained by first and last occurrences of boundary defining macro- and microfossils (e.g. ammonites). High resolution C-isotope records appear to be an excellent correlation proxy for this period in the Eiberg Basin. Pyrolysis analysis demonstrates increased Hydrogen Index (HI) values for organic matter coinciding with the initial CIE. Terrestrial organic matter influx and mass occurrences of green algae remains may have influenced the C-isotope composition of the sedimentary organic matter. This may have contributed to the extreme amplitude of the initial CIE in the Eiberg Basin.

  4. Origination and death of petroleum systems along the Late Jurassic/Early Cretaceous northern Tethyan margin

    Energy Technology Data Exchange (ETDEWEB)

    Golonka, J. [Mobil Research and Development Corp., Dallas, TX (United States); Kiessling, W. [Erlangen-Nuernberg Univ., Erlangen (Germany). Inst. fuer Geologie und Mineralogie; Krobicki, M. [Academy of Mining and Metallurgy, Cracow (Poland). Inst. of Petroleum Engineering; Bocharova, N.Y. [Russian Academy of Sciences, Moscow (Russian Federation). Center for Program Studies

    1997-09-01

    Breakup of Pangea during Jurassic and Cretaceous times created a system of rifts along the northern Tethyan margin. Some of these rifts developed into oceanic basins while others developed on continental crust and turned into aulacogenes. The basins were separated from the main Tethys ocean by several plates and ridges. Partial uplift of the main European plate and late Kimmerian orogeny resulted in the establishment of restricted conditions in the marginal Tethyan basins. The paleogeographic and paleoclimatic setting favoured upwelling along the ridges and continental margins. Source rock prediction value modelling placed Tethyan marginal basins among the best Jurassic source rocks of the world. Self-contained petroleum systems consisting of source rocks, carbonate reservoirs and evaporitic seals occur in the area east of Poland. Actual hydrocarbon production is ongoing in Afghanistan and the Amu-Daria province. Some of Carpathian oils might also be sourced by Late Jurassic/Early Cretaceous rocks. In the western area, petroleum systems were destroyed during the Alpine orogeny.

  5. Floral changes across the Triassic/Jurassic boundary linked to flood basalt volcanism

    Science.gov (United States)

    van de Schootbrugge, B.; Quan, T. M.; Lindström, S.; Püttmann, W.; Heunisch, C.; Pross, J.; Fiebig, J.; Petschick, R.; Röhling, H.-G.; Richoz, S.; Rosenthal, Y.; Falkowski, P. G.

    2009-08-01

    One of the five largest mass extinctions of the past 600million years occurred at the boundary of the Triassic and Jurassic periods, 201.6million years ago. The loss of marine biodiversity at the time has been linked to extreme greenhouse warming, triggered by the release of carbon dioxide from flood basalt volcanism in the central Atlantic Ocean. In contrast, the biotic turnover in terrestrial ecosystems is not well understood, and cannot be readily reconciled with the effects of massive volcanism. Here we present pollen, spore and geochemical analyses across the Triassic/Jurassic boundary from three drill cores from Germany and Sweden. We show that gymnosperm forests in northwest Europe were transiently replaced by fern and fern-associated vegetation, a pioneer assemblage commonly found in disturbed ecosystems. The Triassic/Jurassic boundary is also marked by an enrichment of polycyclic aromatic hydrocarbons, which, in the absence of charcoal peaks, we interpret as an indication of incomplete combustion of organic matter by ascending flood basalt lava. We conclude that the terrestrial vegetation shift is so severe and wide ranging that it is unlikely to have been triggered by greenhouse warming alone. Instead, we suggest that the release of pollutants such as sulphur dioxide and toxic compounds such as the polycyclic aromatic hydrocarbons may have contributed to the extinction.

  6. A Middle Jurassic heterodontosaurid dinosaur from Patagonia and the evolution of heterodontosaurids

    Science.gov (United States)

    Pol, Diego; Rauhut, Oliver W. M.; Becerra, Marcos

    2011-05-01

    Heterodontosauridae is a morphologically divergent group of dinosaurs that has recently been interpreted as one of the most basal clades of Ornithischia. Heterodontosaurid remains were previously known from the Early Jurassic of southern Africa, but recent discoveries and studies have significantly increased the geographical and temporal range for this clade. Here, we report a new ornithischian dinosaur from the Middle Jurassic Cañadón Asfalto Formation in central Patagonia, Argentina. This new taxon, Manidens condorensis gen. et sp. nov., includes well-preserved craniomandibular and postcranial remains and represents the only diagnostic ornithischian specimen yet discovered in the Jurassic of South America so far. Derived features of its anatomy indicate that Manidens belongs to Heterodontosauridae, as the sister taxon of Heterodontosaurus and other South African heterodontosaurids. The presence of posterior dentary teeth with high crowns but lacking extensive wear facets in Manidens suggests that this form represents an intermediate stage in the development of the remarkable adaptations to herbivory described for Heterodontosaurus. The dentition of Manidens condorensis also has autapomorphies, such as asymmetrically arranged denticles in posterior teeth and a mesially projected denticle in the posteriormost teeth. At an estimated total length of 60-75 cm, Manidens furthermore confirms the small size of basal heterodontosaurids.

  7. New evidence for mammaliaform ear evolution and feeding adaptation in a Jurassic ecosystem.

    Science.gov (United States)

    Luo, Zhe-Xi; Meng, Qing-Jin; Grossnickle, David M; Liu, Di; Neander, April I; Zhang, Yu-Guang; Ji, Qiang

    2017-08-17

    Stem mammaliaforms are forerunners to modern mammals, and they achieved considerable ecomorphological diversity in their own right. Recent discoveries suggest that eleutherodontids, a subclade of Haramiyida, were more species-rich during the Jurassic period in Asia than previously recognized. Here we report a new Jurassic eleutherodontid mammaliaform with an unusual mosaic of highly specialized characteristics, and the results of phylogenetic analyses that support the hypothesis that haramiyidans are stem mammaliaforms. The new fossil shows fossilized skin membranes that are interpreted to be for gliding and a mandibular middle ear with a unique character combination previously unknown in mammaliaforms. Incisor replacement is prolonged until well after molars are fully erupted, a timing pattern unique to most other mammaliaforms. In situ molar occlusion and a functional analysis reveal a new mode of dental occlusion: dual mortar-pestle occlusion of opposing upper and lower molars, probably for dual crushing and grinding. This suggests that eleutherodontids are herbivorous, and probably specialized for granivory or feeding on soft plant tissues. The inferred dietary adaptation of eleutherodontid gliders represents a remarkable evolutionary convergence with herbivorous gliders in Theria. These Jurassic fossils represent volant, herbivorous stem mammaliaforms associated with pre-angiosperm plants that appear long before the later, iterative associations between angiosperm plants and volant herbivores in various therian clades.

  8. New Fossil Lepidoptera (Insecta: Amphiesmenoptera) from the Middle Jurassic Jiulongshan Formation of Northeastern China

    Science.gov (United States)

    Zhang, Weiting; Shih, Chungkun; Labandeira, Conrad C.; Sohn, Jae-Cheon; Davis, Donald R.; Santiago-Blay, Jorge A.; Flint, Oliver; Ren, Dong

    2013-01-01

    Background The early history of the Lepidoptera is poorly known, a feature attributable to an inadequate preservational potential and an exceptionally low occurrence of moth fossils in relevant mid-Mesozoic deposits. In this study, we examine a particularly rich assemblage of morphologically basal moths that contribute significantly toward the understanding of early lepidopteran biodiversity. Methodology/Principal Findings Our documentation of early fossil moths involved light- and scanning electron microscopic examination of specimens, supported by various illumination and specimen contrast techniques. A total of 20 moths were collected from the late Middle Jurassic Jiulongshan Formation in Northeastern China. Our principal results were the recognition and description of seven new genera and seven new species assigned to the Eolepidopterigidae; one new genus with four new species assigned to the Mesokristenseniidae; three new genera with three new species assigned to the Ascololepidopterigidae fam. nov.; and one specimen unassigned to family. Lepidopteran assignment of these taxa is supported by apomorphies of extant lineages, including the M1 vein, after separation from the M2 vein, subtending an angle greater than 60 degrees that is sharply angulate at the junction with the r–m crossvein (variable in Trichoptera); presence of a foretibial epiphysis; the forewing M vein often bearing three branches; and the presence of piliform scales along wing veins. Conclusions/Significance The diversity of these late Middle Jurassic lepidopterans supports a conclusion that the Lepidoptera–Trichoptera divergence occurred by the Early Jurassic. PMID:24278142

  9. New robertinid foraminifers from the Early Jurassic of Adnet, Austria and their evolutionary importance

    Directory of Open Access Journals (Sweden)

    Sylvain Rigaud

    2016-12-01

    Full Text Available New benthic multichambered foraminifers have been discovered in the Hettangian–Sinemurian of the Northern Calcareous Alps (Adnet, Salzburg, Austria. Originally aragonitic, these forms are completely recrystallized but the early impregnation of their tests by Fe-Mn solutions has, to some extent, allowed an indirect preservation of their primary structure. The most remarkably preserved specimens are found in close vicinity to the marmorea crust, a heavily mineralized multiphased hardground. We describe two new genera, Velleditsiella gen. nov., a microgastropod look-alike foraminifer, which includes the species V. felicitaszae gen. et sp. nov. and V. spinaferra gen. et sp. nov., and Rossanella gen. nov., the first known representative of the superfamily Conorboidoidea, which includes the species R. martinii gen. et sp. nov. Considering their structural and morphological characteristics, Velleditsiella and Rossanella phylogenetically derive from two distinct Triassic lineages, respectively the families Trochosiphoniidae and Variostomatidae. The discovery of diverse aragonitic assemblages in earliest Jurassic strata dismisses the long believed hypothesis that all Jurassic aragonitic multichambered foraminifers originated from a single Oberhauserellidae ancestor. It also supports a lower impact of the Triassic/Jurassic biotic crisis on the evolution of aragonitic foraminifers. Hypotheses for the short term and long term evolution of aragonitic multichambered foraminifers are discussed and new phyletic trees are proposed.

  10. New evidence for mammaliaform ear evolution and feeding adaptation in a Jurassic ecosystem

    Science.gov (United States)

    Luo, Zhe-Xi; Meng, Qing-Jin; Grossnickle, David M.; Liu, Di; Neander, April I.; Zhang, Yu-Guang; Ji, Qiang

    2017-08-01

    Stem mammaliaforms are forerunners to modern mammals, and they achieved considerable ecomorphological diversity in their own right. Recent discoveries suggest that eleutherodontids, a subclade of Haramiyida, were more species-rich during the Jurassic period in Asia than previously recognized. Here we report a new Jurassic eleutherodontid mammaliaform with an unusual mosaic of highly specialized characteristics, and the results of phylogenetic analyses that support the hypothesis that haramiyidans are stem mammaliaforms. The new fossil shows fossilized skin membranes that are interpreted to be for gliding and a mandibular middle ear with a unique character combination previously unknown in mammaliaforms. Incisor replacement is prolonged until well after molars are fully erupted, a timing pattern unique to most other mammaliaforms. In situ molar occlusion and a functional analysis reveal a new mode of dental occlusion: dual mortar-pestle occlusion of opposing upper and lower molars, probably for dual crushing and grinding. This suggests that eleutherodontids are herbivorous, and probably specialized for granivory or feeding on soft plant tissues. The inferred dietary adaptation of eleutherodontid gliders represents a remarkable evolutionary convergence with herbivorous gliders in Theria. These Jurassic fossils represent volant, herbivorous stem mammaliaforms associated with pre-angiosperm plants that appear long before the later, iterative associations between angiosperm plants and volant herbivores in various therian clades.

  11. Submarine-fan facies associations of the Eocene Butano Sandstone, Santa Cruz mountains, California

    Science.gov (United States)

    Nilsen, Tor H.

    1984-06-01

    The Eocene Butano Sandstone was deposited as a submarine fan in a relatively small, partly restricted basin in a borderland setting. It is possibly as thick as 3000 m and was derived from erosion of nearly Mesozoic granitic and older metamorphic rocks located to the south. Deposition was at lower bathyal to abyssal water depths. The original fan may have been 120-to 160-km long and 80-km wide. Outcrops of submarine-canyon, innerfan, middle-fan, and outer-fan facies associations indicate that the depositional model of Mutti and Ricci Lucchi can be used to describe the Butano Sandstone.

  12. The effects of impure CO2 on reservoir sandstones: results from mineralogical and geomechanical experiments

    Science.gov (United States)

    Marbler, H.; Erickson, K. P.; Schmidt, M.; Lempp, Ch.; Pöllmann, H.

    2012-04-01

    An experimental study of the behaviour of reservoir sandstones from deep saline aquifers during the injection and geological storage of CO2 with the inherent impurities SOX and NOX is part of the German national project COORAL*. Sample materials were taken from outcrops of possible reservoir formations of Rotliegend and Bunter Sandstones from the North German Basin. A combination of mineralogical alteration experiments and geomechanical tests was carried out on these rocks to study the potential effects of the impurities within the CO2 pore fluid. Altered rock samples after the treatment with CO2 + SOX/NOX in an autoclave system were loaded in a triaxial cell under in-situ pressure and temperature conditions in order to estimate the modifications of the geomechanical rock properties. Mineralogical alterations were observed within the sandstones after the exposure to impure supercritical (sc)CO2 and brine, mainly of the carbonatic, but also of the silicatic cements, as well as of single minerals. Besides the partial solution effects also secondary carbonate and minor silicate mineral precipitates were observed within the pore space of the treated sandstones. These alterations affect the grain structure of the reservoir rock. Results of geomechanical experiments with unaltered sandstones show that the rock strength is influenced by the degree of rock saturation before the experiment and the chemical composition of the pore fluid (scCO2 + SOX + NOX). After long-term autoclave treatment with impure scCO2, the sandstone samples exhibit modified strength parameters and elastic deformation behaviour as well as changes in porosity compared to untreated samples. Furthermore, the injected fluid volume into the pore space of sandstones from the same lithotype varies during triaxial loading depending on the chemistry of the pore fluid. CO2 with NOX and SOX bearing fluid fills a significantly larger proportion of the sandstone pore space than brine with pure scCO2. * The

  13. Quantifying the effect of squirt flow dispersion from compliant clay porosity in clay bearing sandstones

    DEFF Research Database (Denmark)

    Sørensen, Morten Kanne; Fabricius, Ida Lykke

    2013-01-01

    Compliant porosity in the form of cracks is known to cause significant attenuation and velocity dispersion through pore pressure gradients and consequent relaxation, dubbed squirt flow. Squirt flow from cracks vanish at high confining stress due to crack closing. Studies on clay bearing sandstones......-squirt flow on the bulk modulus of a clay bearing sandstone. The predicted magnitude of the clay-squirt effect on the bulk modulus is compared with experimental data. The clay-squirt effect is found to possibly account for a significant portion of the deviances from Gassmann fluid substitution in claybearing...

  14. INFRARED THERMAL IMAGE STUDY ON THE FOREWARNING OF COAL AND SANDSTONE FAILURE UNDER LOAD

    Institute of Scientific and Technical Information of China (English)

    吴立新; 王金庄

    1997-01-01

    In the experimental study, AGE-782 thermal instrument was used to detect the infrared radiation variation of coal and sandstone (wave-length range 3.6~5.5 μm was used). It's discovered that coal and sandstone failure under load have three kinds of infrared thermal features as well as infrared forewarning messages. That are: (1) temperature rises gradually but drops before failure ; (2) temperature rises gradually but quickly rises before failure; (3) first rises,then drops and lower temperature emerges before failure. The further researches and the prospect of micro-wave remote sensing detection .on ground pressure is also discussed.

  15. Biologically-initiated rock crust on sandstone: Mechanical and hydraulic properties and resistance to erosion

    Science.gov (United States)

    Slavík, Martin; Bruthans, Jiří; Filippi, Michal; Schweigstillová, Jana; Falteisek, Lukáš; Řihošek, Jaroslav

    2017-02-01

    Biocolonization on sandstone surfaces is known to play an important role in rock disintegration, yet it sometimes also aids in the protection of the underlying materials from rapid erosion. There have been few studies comparing the mechanical and/or hydraulic properties of the BIRC (Biologically-Initiated Rock Crust) with its subsurface. As a result, the overall effects of the BIRC are not yet well understood. The objective of the present study was to briefly characterize the BIRC from both the mineralogical and biological points of view, and especially to quantify the effect of the BIRC upon the mechanical and hydraulic properties of friable sandstone. The mineralogical investigation of a well-developed BIRC showed that its surface is enriched in kaolinite and clay- to silt-sized quartz particles. Total organic carbon increases with the age of the BIRC. Based on DNA sequencing and microscopy, the BIRC is formed by various fungi, including components of lichens and green algae. Using the method of drilling resistance, by measuring tensile strength, and based on water jet testing, it was determined that a BIRC is up to 12 times less erodible and has 3-35 times higher tensile strength than the subsurface friable sandstone. Saturated hydraulic conductivity of the studied BIRC is 15-300 times lower than the subsurface, and was measured to also decrease in capillary water absorption (2-33 times). Water-vapor diffusion is not significantly influenced by the presence of the BIRC. The BIRC thus forms a hardened surface which protects the underlying material from rain and flowing water erosion, and considerably modifies the sandstone's hydraulic properties. Exposing the material to calcination (550 °C), and experiments with the enzyme zymolyase indicated that a major contribution to the surface hardening is provided by organic matter. In firmer sandstones, the BIRC may still considerably decrease the rate of weathering, as it is capable of providing cohesion to strongly

  16. The Jurassic petroleum system north and west of Britain: a geochemical oil-source correlation study

    Energy Technology Data Exchange (ETDEWEB)

    Scotchman, I.C. [Statoil Ltd., London (United Kingdom); Griffith, C.E.; Holmes, A.J. [Mobil North Sea Ltd., London (United Kingdom); Jones, D.M. [University of Newcastle (United Kingdom). Newcastle Research Group in Fossil Fuels and Environmental Geochemistry

    1998-12-31

    Recent significant oil discoveries have focused exploration attention on the Atlantic Margin areas north and west of Britain, in particular the West of Shetlands area. These discoveries, the Foinaven and Schiehallion fields, each have reserves of 250 to 500 million barrels (39.8 to 79.5 x 10{sup 6} m{sup 3}) of 24-27 {sup o} API oil while an earlier heavy oil discovery, the Clair Field, is the largest undeveloped oil discovery on the U.K. Continental Shelf with resources estimated in the range 3-5 billion barrels (477 to 795 x 10{sup 6} m{sup 3}). Other discoveries include Suilven, the very heavy oil in well 204/28-1 and the Quadrant 205 Strathmore and Solan fields. Potential source rocks in areas adjacent to the West of Shetlands include the Upper Jurassic Kimmeridge CLay Formation equivalent, the Middle and Lower Jurassic and the Middle Devonian. The results of geochemical studies of the oils, reservoir core extracts and source rocks from released wells from these West of Shetlands discoveries show them to be genetically related to North Sea oils sourced from the Kimmeridge Clay Formation equivalent. Detailed geochemical analysis (biomarkers, source rock reaction kinetics, compound specific isotope analysis and fluid inclusion ``c