The Jules Horowitz nuclear complex a plat-form for research and development on nuclear fuel and materials for the 21st century

International Nuclear Information System (INIS)

Ballagny, A.; Bouilloux, Y.; Chantoin, P.; Iracane, D.

2001-01-01

The CEA intends to build a material test reactor at Cadarache (South of France). This reactor would be the central piece of a wider complex which would include experimental fuel fabrication, destructive and non destructive examinations, in-reactor on line measurement advanced methods and modelling. For 50 years this platform would provide the necessary knowledge to the nuclear industry, the safety authority and to the national decision makers. This material test reactor called Jules Horowitz reactor (JHR) could be a key facility for industry and the central component of the European research area on nuclear fission from 2010. In this paper an overview of the research complex is given and a first approach of the development effort undertaken to meet the requirements in term of : ''time to result, experimental cost, experiment quality and international co-operation. Finally are given several ways of technical development undertaken to meet the above requirements. (orig.)

Radiation Transport Calculation of the UGXR Collimators for the Jules Horowitz Reactor (JHR)

Science.gov (United States)

Chento, Yelko; Hueso, César; Zamora, Imanol; Fabbri, Marco; Fuente, Cristina De La; Larringan, Asier

2017-09-01

Jules Horowitz Reactor (JHR), a major infrastructure of European interest in the fission domain, will be built and operated in the framework of an international cooperation, including the development and qualification of materials and nuclear fuel used in nuclear industry. For this purpose UGXR Collimators, two multi slit gamma and X-ray collimation mechatronic systems, will be installed at the JHR pool and at the Irradiated Components Storage pool. Expected amounts of radiation produced by the spent fuel and X-ray accelerator implies diverse aspects need to be verified to ensure adequate radiological zoning and personnel radiation protection. A computational methodology was devised to validate the Collimators design by means of coupling different engineering codes. In summary, several assessments were performed by means of MCNP5v1.60 to fulfil all the radiological requirements in Nominal scenario (TEDE < 25µSv/h) and in Maintenance scenario (TEDE < 2mSv/h) among others, detailing the methodology, hypotheses and assumptions employed.

Irradiation of fuels and materials in the Jules Horowitz reactor: The 6th European Union JHR co-ordination action (JHR-CA)

International Nuclear Information System (INIS)

Iracane, Daniel; Parrat, Daniel

2005-01-01

The Fermine thematic network in the 5th FP pointed out the need for a new MTR facility in Europe to answer the continuous need of irradiation capabilities for fission power reactors and fusion facilities and to face the ageing of present MTRs. The Jules Horowitz Reactor (JHR) Project in Cadarache copes with this context, as an international service-oriented user-facility. In the field of nuclear fuels and materials irradiation experiments, a 6th FP co-ordination action, called JHR-CA, has started at the beginning of 2004 for 2 years. The main objective is to network existing expertise on development of a new generation of experimental devices, through definition of conceptual designs, instrumentation and related in-reactor services. This paper presents the outline of the JHR project, the organization of the JHR-CA programme, and a choice of irradiation device conceptual design results. (author)

Study of the uniform corrosion of an aluminium alloy used for the fuel cladding of the Jules Horowitz experimental reactor; Etude de la corrosion uniforme d'un alliage d'aluminium utilise comme gainage du combustible nucleaire du reacteur experimental Jules Horowitz

Energy Technology Data Exchange (ETDEWEB)

Wintergerst, M. [CEA Saclay, Dept. des Materiaux pour le Nucleaire (DEN/DANS/DMN/SEMI), 91 - Gif-sur-Yvette (France)

2008-07-01

For the Jules Horowitz new material testing reactor, an aluminium base alloy, AlFeNi, will be used for the cladding of the fuel plates. Taking into account the thermal properties of the alloy and of its oxide, the corrosion of the fuel cans presents many problems. The aim of this thesis is to provide a growing kinetic of the oxide layer at the surface of the AlFeNi fuel can in order to predict the life time of fuel element. Thus the mechanism of degradation of the cladding will be describe in order to integrate the different parameters of the operating reactor. (A.L.B.)

Study of the uniform corrosion of an aluminium alloy used for the fuel cladding of the Jules Horowitz experimental reactor

International Nuclear Information System (INIS)

Wintergerst, M.

2008-01-01

For the Jules Horowitz new material testing reactor, an aluminium base alloy, AlFeNi, will be used for the cladding of the fuel plates. Taking into account the thermal properties of the alloy and of its oxide, the corrosion of the fuel cans presents many problems. The aim of this thesis is to provide a growing kinetic of the oxide layer at the surface of the AlFeNi fuel can in order to predict the life time of fuel element. Thus the mechanism of degradation of the cladding will be describe in order to integrate the different parameters of the operating reactor. (A.L.B.)

Test devices in Jules Horowitz Reactor dedicated to the material studies in support to the current and future nuclear power plants

International Nuclear Information System (INIS)

Colin, C.; Pierre, J.; Blandin, C.; Gonnier, G.; Auclair, M.; Rozenblum, F.

2015-01-01

The Jules Horowitz Reactor (JHR) is a tank pool Material Testing Reactor with a maximum thermal power designed at 100 MW. JHR is being built in the CEA Cadarache site and will take over the Osiris reactor whose decommissioning is planned. JHR's design allows a large experimental capability (around 20 experiments at the same time) inside the reactor core, close to the fuel with high fast neutron flux or outside the reactor core, in the reflector with higher thermal neutron flux. A special attention has been put on the improvement of the thermal stability and gradients of the interest zones in samples despite strong gamma heating and on an improvement of the instrumentation devoted to the experiments. This paper presents the JHR and its main experimental devices that include the MICA (Material Irradiation Capsule) device, the CALIPSO (in-Core Advanced Loop for Irradiation in Potassium and Sodium) loop, the OCCITANE (Out-of-Core Capsule for Irradiation Testing of Ageing by Neutrons) rig, and the CLOE (Corrosion Loop Experiment) loop. JHR will play an important role for Gen IV reactors: CEA studies the feasibility of transmutation capsules, of metal liquid irradiation loops for JHR

The Jules Horowitz Reactor (JHR), a European Material Testing Reactor (MTR), with extended experimental capabilities

International Nuclear Information System (INIS)

Ballagny, A.; Bergamaschi, Y.; Bouilloux, Y.; Bravo, X.; Guigon, B.; Rommens, M.; Tremodeux, P.

2003-01-01

The Jules Horowitz Reactor (JHR) is the European MTR (Material Testing Reactor) designed to provide, after 2010, the necessary knowledge for keeping the existing power plants in operation and to design innovative reactors types with new objectives such as: minimizing the radioactive waste production, taking into account additional safety requirements, preventing risks of nuclear proliferation. To achieve such an ambitious objective. The JHR is designed with a high flexibility in order to satisfy the current demand from European industry, research and to be able to accommodate future requirements. The JHR will offer a wide range of performances and services in gathering, in a single site at Cadarache, all the necessary functionalities and facilities for an effective production of results: e.g. fuel fabrication laboratories, preparation of the instrumented devices, interpretation of the experiments, modelling. The JHR must rely on a top level scientific environment based on experts teams from CEA and EC and local universities. With a thermal flux of 7,4.10 14 ncm -2 s -1 and a fast flux of 6,4.10 14 ncm -2 s -1 , it is possible to carry out irradiation experiments on materials and fuels whatever the reactor type considered. It will also be possible to carry out locally, fast neutron irradiation to achieve damage effect up to 25 dpa/year. (dpa = deplacement per atom). The study of the fuels behavior under accidental conditions, from analytical experiments, on a limited amount of irradiated fuel, is a major objective of the project. These oriented safety tests are possible by taking into account specific requirements in the design of the facility such as the tightness level of the containment building, the addition of an alpha hot cell and a laboratory for on line fission products measurement. (author)

The 'Reacteur Jules Horowitz': The preliminary design

International Nuclear Information System (INIS)

Ballagny, A.; Frachet, S.; Minguet, J.L.; Leydier, C.

1999-01-01

The 'Reactor Jules Horowitz' is a new research reactor project dedicated to materials and nuclear fuels testing, the location of which is foreseen at the CEA-Cadarache site, and the start-up in 2008. The launching of this project arises from a double finding: 1) the development of nuclear power plants aimed at satisfying the energy needs of the next century cannot be envisaged without the disposal of experimental reactors which are unrivalled for the validation of new concepts of nuclear fuels, materials, and components as well as for their qualification under irradiation. 2) the present park of experimental reactors is 30 to 40 years old and it is advisable to examine henceforth the necessity and the nature of a new reactor to take over and replace, at the beginning of next century, the reactors shut-down in the mean time or at the very end of their lives. Within this framework, the CEA has undertaken, in the last years, a reflection on the mid and long term irradiations needs, to determine the main features and performances of this new reactor. The concept of the reactor will have to fulfil the thermal neutron irradiation requirements as well as the fast neutron experimental needs, with a great potential versatility for any new irradiation programs. The selected reactor project, among several different concepts, is finally a light water open pool concept, with 100 MW thermal power. It could reach neutronic fluxes twice those of present French reactors, and allows many irradiations in the core and around the core, under high neutron fluxes. The reactor will satisfy the highest level of safety in full accordance with international safety recommendations and French safety approach for this kind of nuclear facility, thus giving an added safety margin keeping in mind the versatility of research reactors. The feasibility studies have been focused on the main items, and have permit to determine: the core and fuel designs, with added pressurisation; the different core

An improved thermal-hydraulic modeling of the Jules Horowitz Reactor using the CATHARE2 system code

Energy Technology Data Exchange (ETDEWEB)

Pegonen, R., E-mail: pegonen@kth.se [KTH Royal Institute of Technology, Roslagstullsbacken 21, SE-10691 Stockholm (Sweden); Bourdon, S.; Gonnier, C. [CEA, DEN, DER, SRJH, CEA Cadarache, 13108 Saint-Paul-lez-Durance Cedex (France); Anglart, H. [KTH Royal Institute of Technology, Roslagstullsbacken 21, SE-10691 Stockholm (Sweden)

2017-01-15

Highlights: • An improved thermal-hydraulic modeling of the JHR reactor is described. • Thermal-hydraulics of the JHR is analyzed during loss of flow accident. • The heat exchanger approach gives more realistic and less conservative results. - Abstract: The newest European high performance material testing reactor, the Jules Horowitz Reactor, will support current and future nuclear reactor designs. The reactor is under construction at the CEA Cadarache research center in southern France and is expected to achieve first criticality at the end of this decade. This paper presents an improved thermal-hydraulic modeling of the reactor using solely CATHARE2 system code. Up to now, the CATHARE2 code was simulating the full reactor with a simplified approach for the core and the boundary conditions were transferred into the three-dimensional FLICA4 core simulation. A new more realistic methodology is utilized to analyze the thermal-hydraulic simulation of the reactor during a loss of flow accident.

The 'Reacteur Jules Horowitz': a new experimental reactor project

International Nuclear Information System (INIS)

Frachet, S.; Ballagny, A.

1999-01-01

The Jules Horowitz Reactor (RJH) is a new research reactor project dedicated to materials and nuclear fuel testing, the location of which is foreseen at the CEA-CADARACHE site, and the start-up in 2006. The launching of this project originated from a double finding: The development of nuclear power plants aimed at satisfying the energy needs of the next century, cannot be envisaged without experimental reactors which are unrivaled for the validation of new concepts of nuclear fuels, materials, and components as well as for their qualification under irradiation. The existing experimental reactors are 30 to 40 years old and it is advisable to examine henceforth the necessity for and the nature of a new reactor to take over and replace, at the beginning of next century, the reactors shut-down in the mean time or at the very end of their lives. Within this framework, the CEA has undertaken, in the last years, a study on the mid and long term irradiation needs, to determine the main features and performances of this new reactor. The concept of the reactor will have to fulfill the thermal neutron irradiation requirements as well as the fast neutron experimental needs, with a great potential versatility for any new irradiation programs. The reactor project selected among several different concepts, is finally a light water pool concept, with 100 MW thermal power. It could reach neutronic fluxes twice those of present French reactors, and allows for many irradiations in and around the core, under high neutron fluxes. The reactor will satisfy the highest level of safety in full accordance with international safety recommendations and the French safety approach for this kind of nuclear facility, thus giving an added safety margin keeping in mind the versatility of research reactors. The feasibility studies have been focused on the following most important items: neutronic and thermalhydraulic studies on alternative core designs, with or without added pressurization

New developments in resonant mixture self-shielding treatment with Apollo code and application to Jules Horowitz reactor core calculation

International Nuclear Information System (INIS)

Coste-Delclaux, M.; Aggery, A.; Huot, N.

2005-01-01

APOLLO2 is a modular multigroup transport code developed by Cea in Saclay. Until last year, the self-shielding module could only treat one resonant isotope mixed with moderator isotopes. Consequently, the resonant mixture self-shielding treatment was an iterative one. Each resonant isotope of the mixture was treated separately, the other resonant isotopes of the mixture being then considered as moderator isotopes, that is to say non-resonant isotopes. This treatment could be iterated. Last year, we have developed a new method that consists in treating the resonant mixture as a unique entity. A main feature of APOLLO2 self-shielding module is that some implemented models are very general and therefore very powerful and versatile. We can give, as examples, the use of probability tables in order to describe the microscopic cross-section fluctuations or the TR slowing-down model that can deal with any resonance shape. The self-shielding treatment of a resonant mixture was developed essentially thanks to these two models. The calculations of a simplified Jules Horowitz reactor using a Monte-Carlo code (TRIPOLI4) as a reference and APOLLO2 in its standard and improved versions, show that, as far as the effective multiplication factor is concerned, the mixture treatment does not bring an improvement, because the new treatment suppresses compensation between the reaction rate discrepancies. The discrepancy of 300 pcm that appears with the reference calculation is in accordance with the technical specifications of the Jules Horowitz reactor

Development of the electron beam welding of the aluminium alloy 6061-T6 for the Jules Horowitz reactor

International Nuclear Information System (INIS)

Leblanc, Y.

2013-01-01

The aluminium alloy 6061-T6 has been selected for the construction of the Jules Horowitz's reactor vessel. This reactor vessel is pressurized and will be made through butt welding of ∼ 2 cm thick aluminium slabs. The electron beam welding process has been tested and qualified. It appears that this welding process allows: -) welding without pre-heating, -) vacuum welding, -) welding of 100% of the thickness in one passage, -) very low deforming welding process, -) very low density and very low volume of blow holes, -) weak ZAT (Thermal Affected Zones), and -) high reproducibility that permits automation. (A.C.)

The Jules Horowitz Reactor - A new High Performance European Material Testing Reactor open to International Users Present Status and Objectives

International Nuclear Information System (INIS)

Iracane, Daniel; Bignan, Gilles; Lindbaeck, Jan-Erik; Blomgren, Jan

2010-01-01

The development of sustainable nuclear energy requires R and D on fuel and material behaviour under irradiation with a high level of performance in order to meet the needs and challenges for the benefit of industry, research and public bodies. These stakes require a sustainable and secured access to an up-to-date high performance Material Testing Reactor. Following a broad survey within the European Research Area, the international community agreed that the need for Material Test Reactors in support of nuclear power plant safety and operation will continue in the context of sustainable nuclear energy. The Jules Horowitz Reactor project (JHR) copes with this context. JHR is designed as a user facility addressing the needs of the international community. This means: - flexibility with irradiation loops able to reproduce a large variation in operation conditions of different power reactor technologies, - high flux capacity to address Generations II, III, and IV needs. JHR is designed, built and operated as an international user facility because: - Given the maturity and globalization of the industry, domestic tools have no more the required level of economic and technical efficiency. Meanwhile, countries with nuclear energy need an access to high performance irradiation experimental capabilities to support technical skill and guarantee the competitiveness and safety of nuclear energy. - Many research items related to safety or public policy (waste management, etc.) require international cooperation to share costs and benefits of resulting consensus. JHR design is optimised for offering high performance material and fuel irradiation capability for the coming decades. This project is driven and funded by an international consortium gathering vendors, utilities and public stakeholders. This consortium has been set up in March 2007 when the construction began. The construction is in progress and the start of operation is scheduled for 2014. The JHR is a research

A review of the current thermal-hydraulic modeling of the Jules Horowitz Reactor: A loss of flow accident analysis

International Nuclear Information System (INIS)

Pegonen, R.; Bourdon, S.; Gonnier, C.; Anglart, H.

2014-01-01

Highlights: • CEA methodology for thermal-hydraulic calculations in the JHR reactor is described. • Thermal-hydraulics of the JHR is analyzed during LOFA using CATHARE and FLICA4. • Safety criteria, important modeling parameters and correlations are presented. • Possible improvements of the current methodology are discussed and proposed. - Abstract: The newest European high performance material testing reactor, the Jules Horowitz Reactor, will support existing and future nuclear reactor designs. The reactor is under construction at CEA Cadarache research center in France and is expected to start operation at the end of this decade. R and D and analytical works have already been performed to set-up the methodology for thermal-hydraulic calculations of the reactor. This paper presents the off-line coupled thermal-hydraulic modeling of the reactor using the CATHARE system code and the FLICA4 core analysis code. The main objective of the present work is to analyze the thermal-hydraulic calculations of the reactor during the loss of flow accident using CEA methodology. Possible improvements of the current methodology are shortly discussed and suggested

The future Jules Horowitz material test reactor: A major European research infrastructure for sustaining the international irradiation capacity

International Nuclear Information System (INIS)

Parrat, D.; Bignan, G.; Chauvin, J.; Gonnier, C.

2011-01-01

Multipurpose experimental reactors are now key infrastructures, in complement of prediction capabilities gained thanks to progresses in the modelling, for supporting nuclear energy in terms of safety, ageing management, innovation capacity, economical performances and training. However the European situation in this field is characterized by ageing large infrastructures, which could face to operational issues in the coming years and could jeopardize the knowledge acquisition and the nuclear product qualification. Moreover some specific supplies related to the public demand could be strongly affected (e.g. radiopharmaceutical targets). To avoid a lack in the experimental capacity offer at the European level, the CEA has launched the Jules Horowitz material test reactor (JHR) international program, in the frame of a Consortium gathering EDF (FR), AREVA (FR), the European Commission (EU), SCK.CEN (BE), VTT (FI), CIEMAT (SP), VATTENFALL (SE), UJV (CZ), JAEA (JP) and the DAE (IN). The JHR will be a 100 MW tank pool reactor and will have several experimental locations either inside the reactor core or outside the reactor tank in a reflector constituted by beryllium blocks. Excavation works started mid-2007 on the CEA Cadarache site in the southeast of France. After the construction permit delivery gained in September 2007, building construction began at the beginning of 2009. Reactor start-up is scheduled in 2016. The JHR is designed to offer up-to-date irradiation experimental capabilities for studying nuclear material and fuel behaviour under irradiation in a modern safety frame, mainly due to: 1) High values of fast and thermal neutron fluxes in the core and high thermal neutron flux in the reflector (producing typically twice more material damages per year than available today in European MTRs); 2) A large variety of experimental devices capable to reproduce environment conditions of mainly light water reactors (LWRs) and sodium fast reactors; 3) Several equipment

The Jules Horowitz reactor: complementary safety evaluation in the light of the Fukushima 1 nuclear power station accident

International Nuclear Information System (INIS)

2011-01-01

This report proposes a complementary safety evaluation of the Jules Horowitz reactor in Cadarache (INB 172), one of the French basic nuclear installations (BNI, in French INB) in the light of the Fukushima accident. This evaluation takes the following risks into account: risks of flooding, earthquake, loss of power supply and loss of cooling, in addition to operational management of accident situations. It presents the main characteristics of the installation, identifies the risks of a cliff effect and the main structures and equipment, evaluates the seismic risk (installation sizing, installation conformity, margin evaluation), evaluates the flooding risk (installation sizing, installation conformity, margin evaluation), briefly examines other extreme natural phenomena (extreme meteorological conditions related to flooding, earthquake or flooding with a higher level than that for which the installation is designed). It analyzes the risk of a loss of power supply and of cooling (loss of external and internal electric sources, loss of the ultimate cooling system). It analyzes the management of severe accidents: crisis management organization, available intervention means, robustness of available means. It discusses the conditions of the use of subcontractors

Speech by Prime Minister Francois Fillon. Visit of the Jules Horowitz experimental reactor works on the Commissariat a l'Energie et aux Energies Alternatives site. Cadarache, May 3, 2010; Discours du Premier ministre Francois FILLON Cadarache, lundi 3 mai 2010. Visite du chantier du Reacteur experimental Jules Horowitz sur le site du Commissariat a l'Energie Atomique et aux Energies Alternatives

Energy Technology Data Exchange (ETDEWEB)

NONE

2010-07-01

In this speech, the French Prime Minister evokes the present context, the importance of strategic technologies, and the challenge of investing in these technologies within a context of reduction of public expenses. He comments the decision of his government to finance research and education activities in different domains, and more specifically in the energy sector with this fourth generation Jules Horowitz experimental reactor. He recalls that the nuclear sector has always been very important to the eyes of the successive French governments, and outlines how this reactor will contribute to reactor operational optimization, lifetime extension and safety, nuclear fuel development, etc.

Jules Horowitz reactor - Complementary safety assessment in the light of the Fukushima accident

International Nuclear Information System (INIS)

2011-01-01

This CSA (Complementary Safety Assessment) analyses the robustness of the Jules Horowitz reactor (RJH) to extreme situations such as those that led to the Fukushima accident and proposes a series of improvements. RJH is being built on the Cadarache CEA's site. Robustness is the ability for the facility to withstand events beyond the level for which the facility was designed. Robustness is linked to safety margins but also to the situations leading to a sudden deterioration of the accident sequence (cliff edge effect). Safety is not only a matter of design or of engineered systems, it is also a matter of organization. So issues like RJH's crisis organization, the organization of radiation protection, and work organization via subcontracting are also taken into consideration. This report is divided into 9 main chapters: 1) main features of the RJH facility, 2) identification of cliff edge risks and of equipment essential for safety, 3) earthquake risk, 4) flood risk, 5) risks due to other extreme natural disasters, 6) the loss of electrical power supplies and of cooling systems, 7) management of severe accidents, 8) subcontracting policy, 9) synthesis and list of improvements. This study shows a globally good robustness of the RJH for the considered risks. Nevertheless it can considered relevant to increase the robustness of the plant on a few points: -) to increase the seismic safety margins of some pieces of equipment, -) to increase the robustness of the internal electrical power supplies, -) to increase the fuel cooling capacity, and -) to improve the management of the post-accidental period. (A.C.)

HORUS3D/TH: thermal-hydraulic modelling of the Jules Horowitz reactor core with FLICA4

International Nuclear Information System (INIS)

Royer, E.; Gregoire, O.; Magnaud, J.P.; Roux, L.; Masson, X.

2007-01-01

Cea is planning to build a new pool type reactor as irradiation facility in Cadarache, France: the Jules Horowitz Reactor (JHR). For this purpose, a simulation program is carried out at Cea: HORUS3D, aimed at modeling neutronics, radio-protection and thermal-hydraulics. Advanced features of the thermal-hydraulics component of this simulation program (HORUS3D/TH) are presented in the paper. HORUS3D/TH is based on the FLICA4 thermalhydraulic code. Numerically the main features of HORUS3D/TH are unstructured mesh grids and non-conform mappings. From a phenomenological point of view, flows under study range from high velocity forced convection to natural convection regimes. Steady and transient regimes have been simulated. The validation of physical models used is an important part of HORUS3D project. For thermohydraulics, this validation relies on the SULTAN-RJH experimental facility and fine scale CFD simulations. We have shown in this paper that it is possible to calibrate the macroscopic heat exchange correlation in the forced convection regime and under very high heat fluxes thanks to low Reynolds fine scale calculations. We particularly underline how to cope with the difficulties due to the complex geometry (cylindrical fuel assemblies, made of curved plates) and very high pressure drops and heat fluxes

Speech by Prime Minister Francois Fillon. Visit of the Jules Horowitz experimental reactor works on the Commissariat a l'Energie et aux Energies Alternatives site. Cadarache, May 3, 2010

International Nuclear Information System (INIS)

2010-01-01

In this speech, the French Prime Minister evokes the present context, the importance of strategic technologies, and the challenge of investing in these technologies within a context of reduction of public expenses. He comments the decision of his government to finance research and education activities in different domains, and more specifically in the energy sector with this fourth generation Jules Horowitz experimental reactor. He recalls that the nuclear sector has always been very important to the eyes of the successive French governments, and outlines how this reactor will contribute to reactor operational optimization, lifetime extension and safety, nuclear fuel development, etc.

Methodological developments and qualification of calculation schemes for the modelling of photonic heating in the experimental devices of the future Jules Horowitz material testing reactor (RJH)

International Nuclear Information System (INIS)

Blanchet, D.

2006-01-01

The objective of this work is to develop the modelling of the nuclear heating of the experimental devices of the future Jules Horowitz material testing reactor (RJH). The strong specific nuclear power produced (460 kW/l), induces so intense photonic fluxes which cause heating and large temperature gradients that it is necessary to control it by an adequate design. However, calculations of heating are penalized by the very large uncertainties estimated at a value of about 30% (2*σ) coming from the gaps and uncertainties of the data of gamma emission present in the libraries of basic nuclear data. The experimental program ADAPh aims at reducing these uncertainties. Measurements by thermoluminescent detectors (TLD) and ionisation chambers are carried out in the critical assemblies EOLE (Mox) and Minerve (UO 2 ). The rigorous interpretation of these measurements requires specific developments based on Monte-Carlo simulations of coupled neutron-gamma and gamma-electron transport. The developments carried out are made different in particular by the modelling of cavities phenomena and delayed gamma emissions by the decay of fission products. The comparisons calculation-measurement made it possible to identify a systematic bias confirming a tendency of calculations to underestimate measurements. A Bayesian method of adjustment was developed in order to re-estimate the principal components of the gamma heating and to transpose the results obtained to the devices of the RJH, under conditions clearly and definitely representative. This work made possible to reduce significantly the uncertainties on the determination of the gamma heating from 30 to 15 per cent. (author)

Methodological developments and qualification of calculation schemes for the modelling of photonic heating in the experimental devices of the future Jules Horowitz material testing reactor (RJH); Developpements methodologiques et qualification de schemas de calcul pour la modelisation des echauffements photoniques dans les dispositifs experimentaux du futur reacteur d'irradiation technologiques Jules Horowitz (RJH)

Energy Technology Data Exchange (ETDEWEB)

Blanchet, D

2006-07-01

The objective of this work is to develop the modelling of the nuclear heating of the experimental devices of the future Jules Horowitz material testing reactor (RJH). The strong specific nuclear power produced (460 kW/l), induces so intense photonic fluxes which cause heating and large temperature gradients that it is necessary to control it by an adequate design. However, calculations of heating are penalized by the very large uncertainties estimated at a value of about 30% (2*{sigma}) coming from the gaps and uncertainties of the data of gamma emission present in the libraries of basic nuclear data. The experimental program ADAPh aims at reducing these uncertainties. Measurements by thermoluminescent detectors (TLD) and ionisation chambers are carried out in the critical assemblies EOLE (Mox) and Minerve (UO{sub 2}). The rigorous interpretation of these measurements requires specific developments based on Monte-Carlo simulations of coupled neutron-gamma and gamma-electron transport. The developments carried out are made different in particular by the modelling of cavities phenomena and delayed gamma emissions by the decay of fission products. The comparisons calculation-measurement made it possible to identify a systematic bias confirming a tendency of calculations to underestimate measurements. A Bayesian method of adjustment was developed in order to re-estimate the principal components of the gamma heating and to transpose the results obtained to the devices of the RJH, under conditions clearly and definitely representative. This work made possible to reduce significantly the uncertainties on the determination of the gamma heating from 30 to 15 per cent. (author)

Combined analysis of neutron and photon flux measurements for the Jules Horowitz reactor core mapping

Energy Technology Data Exchange (ETDEWEB)

Fourmentel, D.; Villard, J. F.; Lyoussi, A. [DEN Reactor Studies Dept., French Nuclear Energy and Alternative Energies Commission, CEA Cadarache, 13108 Saint Paul-Lez-Durance (France); Reynard-Carette, C. [Laboratoire Chimie Provence LCP UMR 6264, Univ. of Provence, Centre St. Jerome, 13397 Marseille Cedex 20 (France); Bignan, G.; Chauvin, J. P.; Gonnier, C.; Guimbal, P.; Malo, J. Y. [DEN Reactor Studies Dept., French Nuclear Energy and Alternative Energies Commission, CEA Cadarache, 13108 Saint Paul-Lez-Durance (France); Carette, M.; Janulyte, A.; Merroun, O.; Brun, J.; Zerega, Y.; Andre, J. [Laboratoire Chimie Provence LCP UMR 6264, Univ. of Provence, Centre St. Jerome, 13397 Marseille Cedex 20 (France)

2011-07-01

We study the combined analysis of nuclear measurements to improve the knowledge of the irradiation conditions in the experimental locations of the future Jules Horowitz Reactor (JHR). The goal of the present work is to measure more accurately neutron flux, photon flux and nuclear heating in the reactor. In a Material Testing Reactor (MTR), nuclear heating is a crucial parameter to design the experimental devices to be irradiated in harsh nuclear conditions. This parameter drives the temperature of the devices and of the samples. The numerical codes can predict this parameter but in-situ measurements are necessary to reach the expected accuracy. For this reason, one objective of the IN-CORE program [1] is to study the combined measurements of neutron and photon flux and their cross advanced interpretation. It should be reminded that both neutron and photon sensors are not totally selective as their signals are due to neutron and photon interactions. We intend to measure the neutron flux by three different kinds of sensors (Uranium Fission chamber, Plutonium Fission chamber and Self Powered Neutron Detector), the photon flux by two different sensors (Ionization chamber and Self Powered Gamma Detector) and the nuclear heating by two different ones (Differential calorimeter and Gamma Thermometer). For the same parameter, we expect that the use of different kinds of sensors will allow a better estimation of the aimed parameter by mixing different spectrum responses and different neutron and gamma contributions. An experimental test called CARMEN-1 is scheduled in OSIRIS reactor (CEA Saclay - France) at the end of 2011, with the goal to map irradiation locations in the reactor reflector to get a first validation of the analysis model. This article focuses on the sensor selection for CARMEN-1 experiment and to the way to link neutron and photon flux measurements in view to reduce their uncertainties but also to better assess the neutron and photon contributions to nuclear

Combined analysis of neutron and photon flux measurements for the Jules Horowitz reactor core mapping

International Nuclear Information System (INIS)

Fourmentel, D.; Villard, J. F.; Lyoussi, A.; Reynard-Carette, C.; Bignan, G.; Chauvin, J. P.; Gonnier, C.; Guimbal, P.; Malo, J. Y.; Carette, M.; Janulyte, A.; Merroun, O.; Brun, J.; Zerega, Y.; Andre, J.

2011-01-01

We study the combined analysis of nuclear measurements to improve the knowledge of the irradiation conditions in the experimental locations of the future Jules Horowitz Reactor (JHR). The goal of the present work is to measure more accurately neutron flux, photon flux and nuclear heating in the reactor. In a Material Testing Reactor (MTR), nuclear heating is a crucial parameter to design the experimental devices to be irradiated in harsh nuclear conditions. This parameter drives the temperature of the devices and of the samples. The numerical codes can predict this parameter but in-situ measurements are necessary to reach the expected accuracy. For this reason, one objective of the IN-CORE program [1] is to study the combined measurements of neutron and photon flux and their cross advanced interpretation. It should be reminded that both neutron and photon sensors are not totally selective as their signals are due to neutron and photon interactions. We intend to measure the neutron flux by three different kinds of sensors (Uranium Fission chamber, Plutonium Fission chamber and Self Powered Neutron Detector), the photon flux by two different sensors (Ionization chamber and Self Powered Gamma Detector) and the nuclear heating by two different ones (Differential calorimeter and Gamma Thermometer). For the same parameter, we expect that the use of different kinds of sensors will allow a better estimation of the aimed parameter by mixing different spectrum responses and different neutron and gamma contributions. An experimental test called CARMEN-1 is scheduled in OSIRIS reactor (CEA Saclay - France) at the end of 2011, with the goal to map irradiation locations in the reactor reflector to get a first validation of the analysis model. This article focuses on the sensor selection for CARMEN-1 experiment and to the way to link neutron and photon flux measurements in view to reduce their uncertainties but also to better assess the neutron and photon contributions to nuclear

Methodological developments and qualification of calculation schemes for the modelling of photonic heating in the experimental devices of the future Jules Horowitz material testing reactor (RJH); Developpements methodologiques et qualification de schemas de calcul pour la modelisation des echauffements photoniques dans les dispositifs experimentaux du futur reacteur d'irradiation technologiques Jules Horowitz (RJH)

Energy Technology Data Exchange (ETDEWEB)

Blanchet, D

2006-07-01

The objective of this work is to develop the modelling of the nuclear heating of the experimental devices of the future Jules Horowitz material testing reactor (RJH). The strong specific nuclear power produced (460 kW/l), induces so intense photonic fluxes which cause heating and large temperature gradients that it is necessary to control it by an adequate design. However, calculations of heating are penalized by the very large uncertainties estimated at a value of about 30% (2*{sigma}) coming from the gaps and uncertainties of the data of gamma emission present in the libraries of basic nuclear data. The experimental program ADAPh aims at reducing these uncertainties. Measurements by thermoluminescent detectors (TLD) and ionisation chambers are carried out in the critical assemblies EOLE (Mox) and Minerve (UO{sub 2}). The rigorous interpretation of these measurements requires specific developments based on Monte-Carlo simulations of coupled neutron-gamma and gamma-electron transport. The developments carried out are made different in particular by the modelling of cavities phenomena and delayed gamma emissions by the decay of fission products. The comparisons calculation-measurement made it possible to identify a systematic bias confirming a tendency of calculations to underestimate measurements. A Bayesian method of adjustment was developed in order to re-estimate the principal components of the gamma heating and to transpose the results obtained to the devices of the RJH, under conditions clearly and definitely representative. This work made possible to reduce significantly the uncertainties on the determination of the gamma heating from 30 to 15 per cent. (author)

Geometrical modification transfer between specific meshes of each coupled physical codes. Application to the Jules Horowitz research reactor experimental devices

International Nuclear Information System (INIS)

Duplex, B.

2011-01-01

The CEA develops and uses scientific software, called physical codes, in various physical disciplines to optimize installation and experimentation costs. During a study, several physical phenomena interact, so a code coupling and some data exchanges between different physical codes are required. Each physical code computes on a particular geometry, usually represented by a mesh composed of thousands to millions of elements. This PhD Thesis focuses on the geometrical modification transfer between specific meshes of each coupled physical code. First, it presents a physical code coupling method where deformations are computed by one of these codes. Next, it discusses the establishment of a model, common to different physical codes, grouping all the shared data. Finally, it covers the deformation transfers between meshes of the same geometry or adjacent geometries. Geometrical modifications are discrete data because they are based on a mesh. In order to permit every code to access deformations and to transfer them, a continuous representation is computed. Two functions are developed, one with a global support, and the other with a local support. Both functions combine a simplification method and a radial basis function network. A whole use case is dedicated to the Jules Horowitz reactor. The effect of differential dilatations on experimental device cooling is studied. (author) [fr

The Jules Horowitz Reactor project, a driver for revival of the research reactor community

International Nuclear Information System (INIS)

Pere, P.; Cavailler, C.; Pascal, C.

2010-01-01

The first concrete of the nuclear island for the Jules Horowitz Reactor (JHR) was poured at the end of July 2009 and construction is ongoing. The JHR is the largest new platform for irradiation experiments supporting Generation II and III reactors, Generation IV technologies, and radioisotope production. This facility, composed of a unique grouping of workshops, hot cells and hot laboratories together with a first-rate MTR research reactor, will ensure that the process, from preparations for irradiation experiments through post-irradiation non-destructive examination, is completed expediently, efficiently and, of course, safely. In addition to the performance requirements to be met in terms of neutron fluxes on the samples (5x10 14 n.cm -2 /sec -1 E>1 MeV in core and 3,6x10 14 n.cm -2 /sec -1 E<0.625 eV in the reflector) and the JHR's considerable irradiation capabilities (more than 20 experiments and one-tenth of irradiation area for simultaneous radioisotope production), the JHR is the first MTR to be built since the end of the 1960s, making this an especially challenging project. The presentation will provide an overview of the reactor, hot cells and laboratories and an outline of the key milestones in the project schedule, including initial criticality in early 2014 and radioisotope production in 2015. This will be followed by a description of the project organization set up by the CEA as owner and future operator and AREVA TA as prime contractor and supplier of critical systems, and a discussion of project challenges, especially those dealing with the following items:accommodation of a broad experimental domain; involvement by international partners making in-kind contributions to the project; ? development of components critical to safety and performance; the revival of engineering of research reactors and experimental devices involving France's historical players in the field of research reactors, and; tools to carry out the project, including computer codes

The Jules Horowitz reactor project, a driver for revival of the research reactor community

Energy Technology Data Exchange (ETDEWEB)

Pere, P.; Cavailler, C.; Pascal, C. [AREVA TA, CEA Cadarache - Etablissement d' AREVA TA - Chantier RJH - MOE - BV2 - BP no. 9 - 13115 Saint Paul lez Durance (France); CS 50497 - 1100, rue JR Gauthier de la Lauziere, 13593 Aix en Provence cedex 3 (France)

2010-07-01

The first concrete of the nuclear island for the Jules Horowitz Reactor (JHR) was poured at the end of July 2009 and construction is ongoing. The JHR is the largest new platform for irradiation experiments supporting Generation II and III reactors, Generation IV technologies, and radioisotope production. This facility, composed of a unique grouping of workshops, hot cells and hot laboratories together with a first -rate MTR research reactor, will ensure that the process, from preparations for irradiation experiments through post-irradiation non-destructive examination, is completed expediently, efficiently and, of course, safely. In addition to the performance requirements to be met in terms of neutron fluxes on the samples (5x10{sup 14} n.cm{sup -2}/sec{sup -1} E> 1 MeV in core and 3,6x10{sup 14} n.cm{sup -2}/sec{sup -1} E<0.625 eV in the reflector) and the JHR's considerable irradiation capabilities (more than 20 experiments and one-tenth of irradiation area for simultaneous radioisotope production), the JHR is the first MTR to be built since the end of the 1960's, making this an especially challenging project. The presentation will provide an overview of the reactor, hot cells and laboratories and an outline of the key milestones in the project schedule, including initial criticality in early 2014 and radioisotope production in 2015. This will be followed by a description of the project organization set up by the CEA as owner and future operator and AREVA TA as prime contractor and supplier of critical systems, and a discussion of project challenges, especially those dealing with the following items: - accommodation of a broad experimental domain, - involvement by international partners making in-kind contributions to the project, - development of components critical to safety and performance, - the revival of engineering of research reactors and experimental devices involving France's historical players in the field of research reactors, and

Study and development of a pyrometric in-core measurement technique to follow the temperature of the fuel rod cladding; applied to the study of Loss of Coolant Accident (LOCA) during trial simulations in the Jules Horowitz Reactor (Material Testing Reactor)

International Nuclear Information System (INIS)

Ramiandrisoa, Liana

2014-01-01

In both research and industry, temperature is a key parameter for understanding and characterizing the behavior of materials. To study the thermomechanical behavior of a fuel rod, a test device is designed for the Jules Horowitz Material Testing Reactor (currently under construction in the CEA Cadarache). The device will be placed under accidental conditions (Loss Of Coolant Accident, LOCA) causing rapid overheating. The temperature tracking, between 700 and 1200 C, will be measured by a fiber optic sensor. The aim of the project is to optimize temperature measurement by comparing different pyrometry techniques. This study covers the management of the main difficulties inherent to the design of the sensor.The first challenge consists of predicting optical fiber behavior in such complex environments where irradiation and high temperature are combined. The fiber will be exposed to a neutron dose rate about 10 12 nfast/cm 2 /s and a dose rate of about 1 kGy/s. Moreover its extremity is heated to approximately 800 C. It is shown that under these conditions, light interferences, absorption bands and fluctuating attenuation are obstacles to overcome or to mitigate.The second challenge, concerning pyrometric measurement, comes from spectral variations expected for the rod emissivity. The material of study is chosen for its widespread use in France: Zircaloy-4. Under oxidizing conditions the spectral emissivity of this Zirconium alloy evolves. This thesis proves that between 700 and 800 C pyrometric measurement is possible from experimental point of view in laboratory without irradiation.In conclusion rod temperature tracking in JHR conditions may be possible providing that interferences are mastered and wavelengths are chosen. This work makes the use of optical pyrometry under civil nuclear extreme conditions more promising. (author) [fr

Study of the aqueous corrosion mechanisms and kinetics of the AlFeNi aluminium based alloy used for the fuel cladding in the Jules Horowitz research reactor

International Nuclear Information System (INIS)

Wintergerst, M.

2009-05-01

For the Jules Horowitz new material-testing reactor (JHR), an aluminium base alloy, called AlFeNi, will be used for the cladding of the fuel plates. This alloy (Al - 1% Fe - 1% Ni - 1 % Mg), which is already used as fuel cladding, was developed for its good corrosion resistance in water at high temperatures. However, few studies dealing with the alteration process in water and the relationships with irradiation effects have been performed on this alloy. The conception of the JHR fuel requires a better knowledge of the corrosion mechanisms. Corrosion tests were performed in autoclaves at 70 C, 165 C and 250 C on AlFeNi plates representative of the fuel cladding. Several techniques were used to characterize the corrosion scale: SEM, TEM, EPMA, XRD, Raman spectroscopy. Our observations show that the corrosion scale is made of two main layers: a dense amorphous scale close to the metal and a porous crystalline scale in contact with the water. More than the morphology, the chemical compositions of both layers are different. This duplex structure results from a mixed growth mechanism: an anionic growth to develop the inner oxide and a cationic diffusion followed by a dissolution-precipitation process to form the outer one. Dynamic experiments at 70 C and corrosion kinetics measurements have demonstrated that the oxide growth process is controlled by a diffusion step associated to a dissolution/precipitation process. A corrosion mechanism of the AlFeNi alloy in aqueous media has been proposed. Then post-irradiation exams performed on irradiated fuel plates were used to investigate the effects of the irradiation on the corrosion behaviour in the reactor core. (author)

Research and materials irradiation reactors

International Nuclear Information System (INIS)

Ballagny, A.; Guigon, B.

2004-01-01

Devoted to the fundamental and applied research on materials irradiation, research reactors are nuclear installations where high neutrons flux are maintained. After a general presentation of the research reactors in the world and more specifically in France, this document presents the heavy water cooled reactors and the water cooled reactors. The third part explains the technical characteristics, thermal power, neutron flux, operating and details the Osiris, the RHF (high flux reactor), the Orphee and the Jules Horowitz reactors. The last part deals with the possible utilizations. (A.L.B.)

Jules Stein, MD: Ophthalmologist, Entertainment Magnate, and Advocate for Vision.

Science.gov (United States)

Straatsma, Bradley R; Weeks, David F

2016-04-01

To report the lifetime activities and accomplishments of Jules Stein, MD. Retrospective review. Assessment of published and unpublished biographical material. Jules Stein combined his love of music and medicine with organizational skills to achieve successive careers as a musician, an ophthalmologist, an entertainment magnate, and an advocate for vision. To preserve vision, he founded Research to Prevent Blindness, founded the Jules Stein Eye Institute at the University of California, Los Angeles, and led a multiyear campaign to establish the National Eye Institute. With successive careers and extraordinary achievements, Jules Stein created an enduring legacy of benefits to ophthalmology, vision research, and the prevention of blindness. Copyright © 2016 American Academy of Ophthalmology. Published by Elsevier Inc. All rights reserved.

STS-101 Crew Interview / Scott Horowitz

Science.gov (United States)

2000-01-01

Live footage of a preflight interview with Pilot Scott J. Horowitz is seen. The interview addresses many different questions including why Horowitz became an astronaut, the events that led to his interest, any role models that he had, and his inspiration. Other interesting information that this one-on-one interview discusses is the reaction and reasons for the splitting-up of the objectives for STS-101 with STS-106. Horowitz also mentions the scheduled space-walk, docking with the International Space Station (ISS), the new glass cockpit of Atlantis, the repairs of equipment and change of the batteries. Horowitz also discusses his responsibilities during the space-walk, and docking of the spacecraft. He stresses that he will have an added challenge during the space-walk, his inability to see where he needs to place the Extravehicular Activities (EVA) crew.

Measurements of combined neutron and photon fluxes for the accurate characterization of the future Jules Horowitz irradiation reactor experimental conditions

International Nuclear Information System (INIS)

Fourmentel, D.

2013-01-01

A new Material Testing Reactor (MTR), the Jules Horowitz Reactor (JHR), is under construction at the CEA Cadarache (French Alternatives Energies and Atomic Energy Commission). From 2016 this new MTR will be a new facility for the nuclear research on materials and fuels. The quality of the experiments to be conducted in this reactor is largely linked to the good knowledge of the irradiation conditions. Since 2009, a new research program called IN-CORE1 'Instrumentation for Nuclear radiations and Calorimetry Online in Reactor' is under progress between CEA and Aix-Marseille University in the framework of a joint laboratory LIMMEX2. This program aims to improve knowledge of the neutron and photon fluxes in the RJH core, with one hand, an innovative instrumentation performing mapping of experimental locations, and on the other hand by coupling neutron flux, photon flux and thermal measurements. Neutron flux expected in the JHR core is about 10 15 n.cm -2 .s -1 and nuclear heating up to 20 W.g -1 for a nominal power of 100 MWth. One of the challenges is to identify sensors able to measure such fluxes in JHR experimental conditions and to determine how to analyse the signals delivered by these sensors with the most appropriate methods. The thesis is part of this ambitious program and aims to study the potential and the interest of the combination of radiation measurements in the prospect of a better assessment of the levels of neutron flux, gamma radiation and nuclear heating in the JHR experimental locations. The first step of IN-CORE program is to develop and operate an instrumented device called CARMEN-1 adapted to the mapping of the OSIRIS reactor, then to develop a second version called CARMEN-2 dedicated to experiments in the JHR core, especially for its start-up. This experiment was the opportunity to test all the radiation sensors which could meet the needs of JHR, including recently developed sensors. Reference neutron measurements are performed by activation

the JHR Material Testing Reactor

International Nuclear Information System (INIS)

Roure, C.; Cornu, B.; Berthet, B.; Simon, E.; Estre, N.; Guimbal, P.; Kinnunen, P.; Kotiluoto, P.

2013-06-01

The Jules Horowitz Reactor (JHR) is a European experimental reactor under construction in CEA Cadarache. It will be dedicated to material and fuel irradiation tests, and to medical isotopes production. Non-Destructive nuclear Examinations systems (NDE) will be implemented in pools to analyse the irradiated fuel or tested material in their supporting experimental irradiation devices extracted from the core or its immediate periphery. The Nuclear Measurement Laboratory (NML) of CEA Cadarache is working in collaboration with VTT (Technical Research Centre in Finland) in designing and developing NDE systems implementing gamma-ray spectroscopy and high energy X-ray imaging of the sample and irradiation device. CEA is also designing a neutron radiography system for which NML is working on the detection system. Design studies are performed with Monte Carlo transport codes and specific simulation tools developed by the NML for Xray and neutron imaging. (authors)

STS-82 Pilot Scott J. 'Doc' Horowitz Suit Up

Science.gov (United States)

1997-01-01

STS-82 Pilot Scott J. 'Doc' Horowitz puts on a glove of his launch and entry suit with assistance from a suit technician in the Operations and Checkout Building. This is Horowitz''';s second space flight. He and the six other crew members will depart shortly for Launch Pad 39A, where the Space Shuttle Discovery awaits liftoff on a 10-day mission to service the orbiting Hubble Space Telescope (HST). This will be the second HST servicing mission. Four back-to-back spacewalks are planned.

STS-105 Crew Interview: Scott Horowitz

Science.gov (United States)

2001-01-01

STS-105 Commander Scott Horowitz is seen during a prelaunch interview. He answers questions about his inspiration to become an astronaut, his career path, training for the mission, and his role in the mission's activities. He gives details on the mission's goals, which include the transfer of supplies from the Discovery Orbiter to the International Space Station (ISS) and the change-over of the Expedition 2 and Expedition 3 crews (the resident crews of ISS). Horowitz discusses the importance of the ISS in the future of human spaceflight.

STS-82 Pilot Scott Horowitz arrives for TCDT

Science.gov (United States)

1997-01-01

STS-82 Pilot Scott J. 'Doc' Horowitz arrives at KSCs Shuttle Landing Facility in a T-38 jet from Houston, TX. Horowitz and the other six crew members are at KSC to participate in the Terminal Countdown Demonstration Test (TCDT), a dress rehearsal for launch. The crew aboard the Space Shuttle Discovery on STS-82 will conduct the second Hubble Space Telescope servicing mission. The 10-day flight is targeted for a Feb. 11 liftoff.

STS-82 Pilot Scott Horowitz at SLF

Science.gov (United States)

1997-01-01

STS-82 Pilot Scott J. 'Doc' Horowitz flashes a wide grin for photographers after he lands his T-38 jet at KSCs Shuttle Landing Facility. Horowitz and the other six members of the STS-82 crew came from their home base at Johnson Space Center in Houston, TX, to spend the last few days before launch at KSC. STS-82 is scheduled for liftoff on Feb. 11 during a 65-minute launch window which opens at 3:56 a.m. EST. The 10-day flight aboard the Space Shuttle Discovery will be the second Hubble Space Telescope servicing mission.

Study of the aqueous corrosion mechanisms and kinetics of the AlFeNi aluminium based alloy used for the fuel cladding in the Jules Horowitz research reactor; Etude des mecanismes et des cinetiques de corrosion aqueuse de l'alliage d'aluminium AlFeNi utilise comme gainage du combustible nucleaire de reacteurs experimentaux

Energy Technology Data Exchange (ETDEWEB)

Wintergerst, M.

2009-05-15

For the Jules Horowitz new material-testing reactor (JHR), an aluminium base alloy, called AlFeNi, will be used for the cladding of the fuel plates. This alloy (Al - 1% Fe - 1% Ni - 1 % Mg), which is already used as fuel cladding, was developed for its good corrosion resistance in water at high temperatures. However, few studies dealing with the alteration process in water and the relationships with irradiation effects have been performed on this alloy. The conception of the JHR fuel requires a better knowledge of the corrosion mechanisms. Corrosion tests were performed in autoclaves at 70 C, 165 C and 250 C on AlFeNi plates representative of the fuel cladding. Several techniques were used to characterize the corrosion scale: SEM, TEM, EPMA, XRD, Raman spectroscopy. Our observations show that the corrosion scale is made of two main layers: a dense amorphous scale close to the metal and a porous crystalline scale in contact with the water. More than the morphology, the chemical compositions of both layers are different. This duplex structure results from a mixed growth mechanism: an anionic growth to develop the inner oxide and a cationic diffusion followed by a dissolution-precipitation process to form the outer one. Dynamic experiments at 70 C and corrosion kinetics measurements have demonstrated that the oxide growth process is controlled by a diffusion step associated to a dissolution/precipitation process. A corrosion mechanism of the AlFeNi alloy in aqueous media has been proposed. Then post-irradiation exams performed on irradiated fuel plates were used to investigate the effects of the irradiation on the corrosion behaviour in the reactor core. (author)

In Memoriam: Jules Aarons (1921-2008): Space Weather Pioneer

Science.gov (United States)

Mendillo, Michael

2009-05-01

Prior to the use of the phrase “space weather” to summarize all possible effects of solar-terrestrial physics upon technological systems, the U.S. Department of Defense (DOD) created and maintained active programs in the application aspects of space physics. The person arguably most associated with those efforts was Jules Aarons, who died on 21 November 2008 at age 87 at his home in Newton, Mass. Jules was a research professor of astronomy and space physics at Boston University from 1981 to 2005, but it was as a civilian scientist at the Air Force Cambridge Research Laboratory (AFCRL) from 1946 to 1981 that Jules emerged as a true leader in studies of how the ionosphere can affect radio communications. He specialized in scintillations, those serious fluctuations of radio signal amplitudes and phases that cause dropouts in otherwise reliable communications links.

Jules Horowitz reactor - presentation of the project and progress report

International Nuclear Information System (INIS)

Ballagny, A.; Frachet, S.; Rommens, M.; Guigon, B.; Minguet, J.L.; Dupuy, J.P.; Leydier, C.

2001-01-01

The RJH project was launched by CEA some years ago, with the objective to replace, after 2010, the material testing reactors of the previous generation. The objectives are also: to realise a significant step in term of performances, to ensure a high flexibility of the design, in order to host in the future new experiments, which are not completely defined at the project stage, to reach a high level of safety, according to the best current practice. After a summary of the main experimental objectives of the facility, the present paper deals with a detailed technical presentation of the project, resulting from preliminary design studies. The following topics are covered successively: the main functionalities, the resulting design options and technical solutions, the layout of the nuclear facility. (orig.)

Neutronics experimental validation of the Jules Horowitz reactor fuel by interpretation of the VALMONT experimental program-transposition of the uncertainties on the reactivity of JHR with JEF2.2 and JEFF3.1.1

International Nuclear Information System (INIS)

Leray, O.; Hudelot, J.P.; Doederlein, C.; Vaglio-Gaudard, C.; Antony, M.; Santamarina, A.; Bernard, D.

2012-01-01

The new European material testing Jules Horowitz Reactor (JHR), currently under construction in Cadarache center (CEA France), will use LEU (20% enrichment in 235 U) fuels (U 3 Si 2 for the start up and UMoAl in the future) which are quite different from the industrial oxide fuel, for which an extensive neutronics experimental validation database has been established. The HORUS3D/N neutronics calculation scheme, used for the design and safety studies of the JHR, is being developed within the framework of a rigorous verification-numerical validation-experimental validation methodology. In this framework, the experimental VALMONT (Validation of Aluminium Molybdenum uranium fuel for Neutronics) program has been performed in the MINERVE facility of CEA Cadarache (France), in order to qualify the capability of HORUS3D/N to accurately calculate the reactivity of the JHR reactor. The MINERVE facility using the oscillation technique provides accurate measurements of reactivity effect of samples. The VALMONT program includes oscillations of samples of UAl ∞ /Al and UMo/Al with enrichments ranging from 0.2% to 20% and Uranium densities from 2.2 to 8 g/cm 3 . The geometry of the samples and the pitch of the experimental lattice ensure maximum representativeness with the neutron spectrum expected for JHR. By comparing the effect of the sample with the one of a known fuel specimen, the reactivity effect can be measured in absolute terms and be compared to computational results. Special attention was paid to the rigorous determination and reduction of the experimental uncertainties. The calculational analysis of the VALMONT results was performed with the French deterministic code APOLLO2. A comparison of the impact of the different calculation methods, data libraries and energy meshes that were tested is presented. The interpretation of the VALMONT experimental program allowed the experimental validation of JHR fuel UMoAl8 (with an enrichment of 19.75% 235 U) by the Minerve

Evaluation of JULES-crop performance against site observations of irrigated maize from Mead, Nebraska

OpenAIRE

Williams, Karina; Gornall, Jemma; Harper, Anna; Wiltshire, Andy; Hemming, Debbie; Quaife, Tristan; Arkebauer, Tim; Scoby, David

2016-01-01

The JULES-crop model (Osborne et al., 2015) is a parameterisation of crops within the Joint UK Land Environment Simulator (JULES), which aims to simulate both the impact of weather and climate on crop productivity and the impact of crop-lands on weather and climate. In this evaluation paper, observations of maize at three FLUXNET sites in Nebraska (US-Ne1, US-Ne2, US-Ne3) are used to test model assumptions and make appropriate input parameter choices. JULES runs are performed for the irrigate...

General safety orientations of the Jules Horowitz Reactor Project (JHRP)

International Nuclear Information System (INIS)

Tremodeux, P.; Fiorini, G.L.

2000-01-01

After a brief reminder of the JHR purpose, the document outlines the General Safety related Orientations/Recommendations used for the design and the safety assessment of the facility. As far as the JHR design is new, the safety philosophy adopted for this reactor will be as consistent as possible with that recommended for future (power...) reactors. The general recommendations developed in the paper are: the general nuclear safety approach for the design, operation and analysis with, in particular, the adoption of the Defence In Depth principle; the general safety objectives in terms of radiological consequences; the use of Probabilistic Safety Studies; quality assurance. The 'Defence in Depth' concept using amongst others the 'Barrier' principle remains the basis of the JHR safety. 'Defence In Depth' is applied both to design and operation. Its adequacy is checked during the safety assessment and the paper gives the technical recommendations that should allow the designer to implement this concept into the final design. Built mainly for experimental irradiation the JHR facilities will be handled according to conventional or new operation rules which could put materials under stress and entail handling errors. Specific recommendations are defined to take into account the corresponding peculiarities; they are discussed in the paper. The safety design of the JHR takes into account the experience accumulated through the CEA experimental irradiation programmes, which represents several dozen reactor years; the consultation of CEA reactor facilities operators is ongoing. The corresponding feedback is shortly described. Recommendations related to maintenance and associated operation are indicated as well as those regarding the human factor. Details are given on the JHR safety practical implementation through the CEA/DRN Safety approach. Details of the corresponding Safety Objectives are also discussed. Finally the designer position on the role of probabilistic safety

Would Jule Charney Have Cracked the Madden-Julian Oscillation?

Science.gov (United States)

Emanuel, K.

2017-12-01

Jule Charney's approach to science often involved looking at old problems in new ways. One example was his theory of baroclinic instability, which followed on the heels of long-standing efforts to explain well-observed cyclones and anticyclones. He mastered the art of boiling a physical phenomenon down to its essence, throwing away many things that others had considered important while expressing that which he retained in the simplest possible way. To help honor Charney's legacy, I will review the history of another well-observed phenomenon - the Madden Julian Oscillation (MJO) - together with the many largely unsuccessful efforts to explain it, culminating finally in a satisfying explanation that Jule would have loved.

SHARP, a first step towards a full sized Jules Verne Launcher

Energy Technology Data Exchange (ETDEWEB)

Bertolini, L.R.; Hunter, J.W. [Lawrence Livermore National Lab., CA (United States); Powell, J.R. [Brookhaven National Lab., Upton, NY (United States); Tidman, D.A. [GT-Devices, Inc., Alexandria, VA (United States)

1993-05-01

A vital element for space exploration and utilization is the ability to affordably place large quantities of consumables and building material into low earth orbit. Calculations and supportive data indicate this can be done with a large hydrogen gas gun referred to as the Jules Verne Launcher (JVL). We present a design for the JVL based upon the concept of side injecting preheated hydrogen along a long barrel. This dramatically reduces the peak pressures in the launcher as well as the pressures and g-loads at the vehicle. The JVL has the promise of reducing payload delivery costs to Low Earth Orbit (LEO) to below $500/kg. The Super High Altitude Research Project (SHARP) is a conventional two-stage hydrogen gas gun which is configured to launch 5 kg packages on suborbital trajectories. It is the first step towards the much larger Jules Verne system and will demonstrate several important features of the larger system. SHARP is currently in the middle of a series of tests aimed at its first milestone. This is to launch 5 kg at 4 km/sec horizontally. In its inclined configuration SHARP should launch vehicles to apogees in excess of 400 km and ranges in excess of 700 km.

Jules Verne's Metaphor of the Iron Cage

NARCIS (Netherlands)

Ossewaarde, Marinus R.R.

2010-01-01

Max Weber's concept of the iron cage has become a byword in the scholarly world since the publication in 1930 of Talcott Parsons’ translation of The Protestant Ethic and the Spirit of Capitalism. What is less well-known is that Jules Verne had earlier used the iron cage metaphor in Twenty Thousand

JULES-crop: a parametrisation of crops in the Joint UK Land Environment Simulator

Science.gov (United States)

Osborne, T.; Gornall, J.; Hooker, J.; Williams, K.; Wiltshire, A.; Betts, R.; Wheeler, T.

2014-10-01

Studies of climate change impacts on the terrestrial biosphere have been completed without recognition of the integrated nature of the biosphere. Improved assessment of the impacts of climate change on food and water security requires the development and use of models not only representing each component but also their interactions. To meet this requirement the Joint UK Land Environment Simulator (JULES) land surface model has been modified to include a generic parametrisation of annual crops. The new model, JULES-crop, is described and evaluation at global and site levels for the four globally important crops; wheat, soy bean, maize and rice is presented. JULES-crop demonstrates skill in simulating the inter-annual variations of yield for maize and soy bean at the global level, and for wheat for major spring wheat producing countries. The impact of the new parametrisation, compared to the standard configuration, on the simulation of surface heat fluxes is largely an alteration of the partitioning between latent and sensible heat fluxes during the later part of the growing season. Further evaluation at the site level shows the model captures the seasonality of leaf area index and canopy height better than in standard JULES. However, this does not lead to an improvement in the simulation of sensible and latent heat fluxes. The performance of JULES-crop from both an earth system and crop yield model perspective is encouraging however, more effort is needed to develop the parameterisation of the model for specific applications. Key future model developments identified include the specification of the yield gap to enable better representation of the spatial variability in yield.

Quantifying the Impact of Tropospheric Ozone on Crops Productivity at regional scale using JULES-crop

Science.gov (United States)

Leung, F.

2016-12-01

Tropospheric ozone (O3) is the third most important anthropogenic greenhouse gas. It is causing significant crop production losses. Currently, O3 concentrations are projected to increase globally, which could have a significant impact on food security. The Joint UK Land Environment Simulator modified to include crops (JULES-crop) is used here to quantify the impacts of tropospheric O3 on crop production at the regional scale until 2100. We evaluate JULES-crop against the Soybean Free-Air-Concentration-Enrichment (SoyFACE) experiment in Illinois, USA. Experimental data from SoyFACE and various literature sources is used to calibrate the parameters for soybean and ozone damage parameters in soybean in JULES-crop. The calibrated model is then applied for a transient factorial set of JULES-crop simulations over 1960-2005. Simulated yield changes are attributed to individual environmental drivers, CO2, O3 and climate change, across regions and for different crops. A mixed scenario of RCP 2.6 and RCP 8.5 climatology and ozone are simulated to explore the implication of policy. The overall findings are that regions with high ozone concentration such as China and India suffer the most from ozone damage, soybean is more sensitive to O3 than other crops. JULES-crop predicts CO2 fertilisation would increase the productivity of vegetation. This effect, however, is masked by the negative impacts of tropospheric O3. Using data from FAO and JULES-crop estimated that ozone damage cost around 55.4 Billion USD per year on soybean. Irrigation improves the simulation of rice only, and it increases the relative ozone damage because drought can reduce the ozone from entering the plant stomata. RCP 8.5 scenario results in a high yield for all crops mainly due to the CO2 fertilisation effect. Mixed climate scenarios simulations suggest that RCP 8.5 CO2 concentration and RCP 2.6 O3 concentration result in the highest yield. Further works such as more crop FACE-O3 experiments and more Crop

RJH seminar

International Nuclear Information System (INIS)

2003-01-01

This document gathers the slides that were presented at the Jules Horowitz reactor (RJH) seminar on the 14 january 2003. RJH seminars take place regularly in order to give an overview and make a point of the advancement of the RJH project. The contributions can be classed into 6 topics: 1) historical review of the RJH project, 2) RJH design and site studies, 3) irradiation devices, 4) development and qualification of codes to design RJH (Horus-3d, Sultan), 5) materials (aluminium alloys, mechanical resistance, corrosion and welding), and 6) UMo nuclear fuel (specifications, fabrication and reprocessing). (A.C.)

Multi-site evaluation of the JULES land surface model using global and local data

Directory of Open Access Journals (Sweden)

D. Slevin

2015-02-01

Full Text Available This study evaluates the ability of the JULES land surface model (LSM to simulate photosynthesis using local and global data sets at 12 FLUXNET sites. Model parameters include site-specific (local values for each flux tower site and the default parameters used in the Hadley Centre Global Environmental Model (HadGEM climate model. Firstly, gross primary productivity (GPP estimates from driving JULES with data derived from local site measurements were compared to observations from the FLUXNET network. When using local data, the model is biased with total annual GPP underestimated by 16% across all sites compared to observations. Secondly, GPP estimates from driving JULES with data derived from global parameter and atmospheric reanalysis (on scales of 100 km or so were compared to FLUXNET observations. It was found that model performance decreases further, with total annual GPP underestimated by 30% across all sites compared to observations. When JULES was driven using local parameters and global meteorological data, it was shown that global data could be used in place of FLUXNET data with a 7% reduction in total annual simulated GPP. Thirdly, the global meteorological data sets, WFDEI and PRINCETON, were compared to local data to find that the WFDEI data set more closely matches the local meteorological measurements (FLUXNET. Finally, the JULES phenology model was tested by comparing results from simulations using the default phenology model to those forced with the remote sensing product MODIS leaf area index (LAI. Forcing the model with daily satellite LAI results in only small improvements in predicted GPP at a small number of sites, compared to using the default phenology model.

Impacts of revised PFTs on JULES simulated carbon and moisture fluxes

Science.gov (United States)

Harper, Anna; Cox, Peter; Sitch, Stephen; Mercado, Lina; Luke, Catherine; Jupp, Tim; Wiltshire, Andy; Jones, Chris; Friedlingstein, Pierre

2013-04-01

JULES is the land surface model in the Hadley Centre GCM, which is used for investigations of climate and climate change. We analyze the impacts on the simulated carbon and moisture fluxes of extending the PFTs in a manner consistent with observed leaf traits. The model currently represents global vegetation with five PFTs (needleleaf and broadleaf trees, C3 and C4 grasses, and shrubs). We add three new PFTs to delineate between deciduous and evergreen trees and shrubs. Since the inception of JULES in the late 90's, a tremendous amount of new data linking leaf traits and potential photosynthesis is available. We use data from the TRY plant trait data base to revise the relationships between leaf area, leaf lifespan, leaf nitrogen content, and Vcmax. In addition, JULES now includes a canopy radiation scheme based on fractions of sunlit and shaded leaves at 10 levels in the canopy. This results in a vertical distribution of nitrogren and Vcmax through the canopy and enables multilayer scaling from leaf to canopy level photosynthesis. The scheme is more physically realistic than previous canopy radiation schemes, but remains to be evaluated outside of the Tropics. Within the constraints of observed values, we optimize new parameter values related to the canopy radiation and photosynthesis, using optimization software developed at the University of Exeter. Impacts on simulated GPP, respiration, and latent heat flux are examined. In particular, we are interested in a better understanding of carbon cycle dynamics in tropical forests. Using data from TRY, carbon fluxes are improved across all PFTs compared to observations from Fluxnet tower sites. We adopt a regional analysis to compare JULES fluxes in certain regions (e.g. tropical forests, and boreal and tropical shrub-dominated landscapes).

In Jules Verne's Footsteps: Seismology in the source

Science.gov (United States)

Ellsworth, Bill; Ito, Hisao; Malin, Peter; Abercrombie, Rachel

When Professor Otto Lidenbrock led his little band to the center of the Earth in Jules Verne's 1864 classic novel, the intrepid adventurers needed little more than practical 19th century clothes to provide them with comfort and protection. How different the science of earthquakes would be if conditions in the Earth were really so friendly to the would-be observer. Even the operation of seismic sensors at the relatively modest depth of 2-3 km, roughly the depth of the shallowest crustal earthquakes, requires careful precautions against the effects of unstable materials, temperature, pressure, and water for successful long-term observations to be made. Indeed, the handful of successful deep borehole experiments that have been conducted to date have depended on simple sensors with limited bandwidth and dynamic range, and have yielded data that were not ideally suited to investigating the details of the earthquake source.

Alfred Jules Aver's induction and Marxian historical evolution: It's ...

African Journals Online (AJOL)

Alfred Jules Aver's induction and Marxian historical evolution: It's lessons for the current economic global crisis. ... Economic liberalism, political manipulation and gross capitalism have been given as the major causes of the present situation in the world economy. It is on this touchstone that we tried to examine the Marxian ...

Large research infrastrucures and networking. Two key factors for maintaining nuclear expertise in Europe

International Nuclear Information System (INIS)

Cognet, G.; Iracane, D.

2004-01-01

Large research infrastructures are of key importance to improve the efficiency and the safety of nuclear energy production. To support present and coming power reactors and fuel cycle facilities and to develop future systems, it is necessary to optimise these infrastructures and their use by taking into account the networking of existing facilities, the access by the European researchers to conduct their own research projects and the creation of new installations when facing ageing issues. Large infrastructures include material testing reactor, hot laboratories for material and fuel under irradiation studies, fuel cycle researches and facilities dedicated to severe accident studies. For example, the CEA severe accident study platform has been recently used by a Bulgarian team to conduct its own research project with a grant provided by the European Commission. Furthermore, because present European material testing reactors are ageing, renewing the irradiation capability is an important and structuring stake for the fission research in Europe in order to continue safe and optimised operations of existing reactors, to support Generation 4 RTD and to keep alive competences. Considering that, CEA has decided to launch the project Jules Horowitz aiming at building a new research reactor. The access to the CEA facilities, including the Jules Horowitz reactor, combined with equivalent possibilities of access to other European facilities through a specific platform would help to develop a long-term vision, to create a coherent and dynamic strategy, to contribute to the stimulation of a large cooperation on nuclear fission, to enable a common approach of safety issues, to gather competencies, to promote the attractiveness of nuclear research to young scientists and to maintain European nuclear expertise at the highest level. This paper intends to provide a view of the existing and needed infrastructures, discuss the ways of access and finally open the discussion on the

For a Better Estimation of Gamma Heating in Experimental Reactors and Devices: Stakes and Work Plan from Calculation Methods to Nuclear Data

International Nuclear Information System (INIS)

Lemaire, Matthieu; Vaglio-Gaudard, Claire; Lyoussi, Abdallah; Reynard-Carette, Christelle

2013-06-01

The Jules Horowitz Reactor (JHR) is an international Material-Testing Reactor currently under construction at CEA Cadarache. The determination of gamma heating levels in this future commercial reactor is of crucial importance as gamma heating affects both safety and performance parameters of the JHR. Required accuracy (5% at one standard deviation) makes it necessary to calibrate bias and uncertainty associated with JHR gamma-heating calculations. Main steps of bias determination for gamma-heating calculations include, firstly, the development of a calculation methodology with controlled use of physical approximations; secondly, the interpretation of gamma-heating measurements so as to determine bias supposed to be only due to nuclear data. (authors)

De Jules et Jim au Vel’ d’Hiv

Directory of Open Access Journals (Sweden)

Annie Oliver

2012-12-01

Full Text Available Dans son roman intitulé On ne peut plus dormir tranquille quand on a une fois ouvert les yeux, Robert Bober s’inspire de sa propre histoire et relate bon nombre de faits qui ont réellement eu lieu, à commencer par le tournage en 1961 du film de François Truffaut Jules et Jim. C’est à partir de ce film – et de nombreuses autres références cinématographiques, de Max Ophuls aux Marx Brothers – que le narrateur, d’origine juive polonaise, va retrouver l’histoire de sa famille mais aussi celle d’une ville, Paris, de la Commune de 1871 à la rafle du Vélodrome d’Hiver en 1942.In his novel On ne peut plus dormir tranquille quand on a une fois ouvert les yeux Robert Bober draws his inspiration from his own life and tells a good number of events which have really taken place. Starting with the shooting, in 1961, of François Truffaut Jules et Jim. From this movie, as well as from many other film references – from Max Ophuls to the Marx Brothers – the narrator of Jewish-Polish origin rediscovers the history of his own family together with that of Paris, from the 1971 Commune to the 1942 round-up of Jews in the Vélodrome d’Hiver.

Experimental and numerical characterization of anisotropic damage evolution of forged Al6061-T6 alloy

International Nuclear Information System (INIS)

Shen, Y.; Garnier, J.; Allais, L.; Crepin, J.; Ancelet, O.; Hiver, J.M.

2011-01-01

Aluminum alloy 6061-T6 (Al-Mg-Si) has been selected as the material of the vessel for the construction of Jules-Horowitz material testing reactor. Fracture mechanism of this alloy has been investigated using mechanical testing of smooth and notched tensile specimens loaded in different directions. A strong anisotropic fracture behavior has been observed. Microstructural studies using tomography and image analysis have shown a presence of anisotropic distributed coarse precipitates which is the key microstructural feature affecting the damage evolution. These observations were complemented by investigations on fractured tensile samples. A damage scenario of anisotropic growth and coalescence of voids is proposed to explain the fracture behavior associated with the distribution of precipitates. A GTN (Gurson-Tvergaard-Needleman) damage model is used to simulate this scenario and to predict damage evolution. (authors)

Nuclear Energy Division. 2009 Activity report

International Nuclear Information System (INIS)

2009-01-01

After a presentation of the future investment programme of the nuclear energy department at the French national Nuclear Research Center (CEA), this report proposes a description of tomorrow's industrial nuclear systems (back-end of future fuel cycle, fourth generation systems, basic scientific and technological research), describes how current nuclear industrial systems are optimized (front-end and back-end of fuel cycle, second and third generation reactors). It presents the main tools for nuclear development: simulation programme, the Jules Horowitz reactor project, maintenance of specific facilities, research valorisation. It reports the activities related to the clean-up and dismantling in different nuclear sites, presents the activities of CEA's nuclear research centres (Saclay, Cadarache, Marcoule), briefly presents the transverse material programme, recalls some events, and gives some key figures

Nuclear energy Division - 2011 Activity report

International Nuclear Information System (INIS)

2012-01-01

This document reports the activity of the Nuclear Energy Department (DEN) within the CEA. It evokes its international relationship (participation to international initiatives, cooperation with different countries), describes the scientific activity within the DEN, presents the Advanced Material Program, and the activities undertaken in different fields: future nuclear industrial systems (fourth generation reactors, downstream part of the future fuel cycle, fundamental scientific and technological research), optimization of the present nuclear industrial activity (second and third generation reactors, nuclear security, upstream and downstream part of the present fuel cycle), tools for nuclear development (numerical simulation, Jules Horowitz reactor), cleaning up and nuclear dismantling (dismantling strategy, the Passage project in Grenoble, works in Marcoule, the Aladin project in Fontenay, waste and material flow management, nuclear support installations, transports). It finally addresses the specific activities of the Marcoule, Cadarache and Saclay centres

Material report in support to RCC-MRX code 2010 stainless steel parts and products

International Nuclear Information System (INIS)

Ancelet, Olivier; Lebarbe, Thierry; Dubiez-Le Goff, Sophie; Bonne, Dominique; Gelineau, Odile

2012-01-01

This paper presents the Material Report dedicated to stainless steels parts and products issued by AFCEN (Association Francaise pour les regles de Conception et de Construction des Materiels des Chaudieres Electro-Nucleaires) in support to RCC-MRx 2010 Code. The RCC-MRx Code is the result of the merger of the RCC-MX 2008, developed in the context of the research reactor Jules Horowitz Reactor project, in the RCC-MR 2007, which set up rules applicable to the design of components operating at high temperature and to the Vacuum Vessel of ITER (a presentation of RCC-MRx 2010 Code is the subject of another paper proposed in this Congress; it explains in particular the status of this Code). This Material Report is part of a set of Criteria of RCC-MRx (this set of Criteria is under construction). The Criteria aim at explaining the design and construction rules of the Code. They cover analyses rules as well as part procurement, welding, methods of tests and examination and fabrication rules. The Material Report particularly provides justifications and explanations on requirements and features dealing with parts and products proposed in the Code. The Material Report contains the following information: Introduction of the grade(s): codes and standards and Reference Procurement Specifications covering parts and products, applications and experience gained, - Physical properties, - Mechanical properties used for design calculations (base metal and welds): basic mechanical properties, creep mechanical properties, irradiated mechanical properties, - Fabrication: experience gained, metallurgy, - Welding: weldability, experience gained during welding and repair procedure qualifications, - Non-destructive examination, - In-service behaviour. In the article, examples of data supplied in the Material Report dedicated to stainless steels will be exposed. (authors)

Constraining the JULES land-surface model for different land-use types using citizen-science generated hydrological data

Science.gov (United States)

Chou, H. K.; Ochoa-Tocachi, B. F.; Buytaert, W.

2017-12-01

Community land surface models such as JULES are increasingly used for hydrological assessment because of their state-of-the-art representation of land-surface processes. However, a major weakness of JULES and other land surface models is the limited number of land surface parameterizations that is available. Therefore, this study explores the use of data from a network of catchments under homogeneous land-use to generate parameter "libraries" to extent the land surface parameterizations of JULES. The network (called iMHEA) is part of a grassroots initiative to characterise the hydrological response of different Andean ecosystems, and collects data on streamflow, precipitation, and several weather variables at a high temporal resolution. The tropical Andes are a useful case study because of the complexity of meteorological and geographical conditions combined with extremely heterogeneous land-use that result in a wide range of hydrological responses. We then calibrated JULES for each land-use represented in the iMHEA dataset. For the individual land-use types, the results show improved simulations of streamflow when using the calibrated parameters with respect to default values. In particular, the partitioning between surface and subsurface flows can be improved. But also, on a regional scale, hydrological modelling was greatly benefitted from constraining parameters using such distributed citizen-science generated streamflow data. This study demonstrates the modelling and prediction on regional hydrology by integrating citizen science and land surface model. In the context of hydrological study, the limitation of data scarcity could be solved indeed by using this framework. Improved predictions of such impacts could be leveraged by catchment managers to guide watershed interventions, to evaluate their effectiveness, and to minimize risks.

A critical assessment of the JULES land surface model hydrology for humid tropical environments

Science.gov (United States)

Zulkafli, Z.; Buytaert, W.; Onof, C.; Lavado, W.; Guyot, J. L.

2013-03-01

Global land surface models (LSMs) such as the Joint UK Land Environment Simulator (JULES) are originally developed to provide surface boundary conditions for climate models. They are increasingly used for hydrological simulation, for instance to simulate the impacts of land use changes and other perturbations on the water cycle. This study investigates how well such models represent the major hydrological fluxes at the relevant spatial and temporal scales - an important question for reliable model applications in poorly understood, data-scarce environments. The JULES-LSM is implemented in a 360 000 km2 humid tropical mountain basin of the Peruvian Andes-Amazon at 12-km grid resolution, forced with daily satellite and climate reanalysis data. The simulations are evaluated using conventional discharge-based evaluation methods, and by further comparing the magnitude and internal variability of the basin surface fluxes such as evapotranspiration, throughfall, and surface and subsurface runoff of the model with those observed in similar environments elsewhere. We find reasonably positive model efficiencies and high correlations between the simulated and observed streamflows, but high root-mean-square errors affecting the performance in smaller, upper sub-basins. We attribute this to errors in the water balance and JULES-LSM's inability to model baseflow. We also found a tendency to under-represent the high evapotranspiration rates of the region. We conclude that strategies to improve the representation of tropical systems to be (1) addressing errors in the forcing and (2) incorporating local wetland and regional floodplain in the subsurface representation.

Empirical validation of the Horowitz Multiple Systemic Infectious Disease Syndrome Questionnaire for suspected Lyme disease.

Science.gov (United States)

Citera, Maryalice; Freeman, Phyllis R; Horowitz, Richard I

2017-01-01

Lyme disease is spreading worldwide, with multiple Borrelia species causing a broad range of clinical symptoms that mimic other illnesses. A validated Lyme disease screening questionnaire would be clinically useful for both providers and patients. Three studies evaluated such a screening tool, namely the Horowitz Multiple Systemic Infectious Disease Syndrome (MSIDS) Questionnaire. The purpose was to see if the questionnaire could accurately distinguish between Lyme patients and healthy individuals. Study 1 examined the construct validity of the scale examining its factor structure and reliability of the questionnaire among 537 individuals being treated for Lyme disease. Study 2 involved an online sample of 999 participants, who self-identified as either healthy (N=217) or suffering from Lyme now (N=782) who completed the Horowitz MSIDS Questionnaire (HMQ) along with an outdoor activity survey. We examined convergent validity among components of the scale and evaluated discriminant validity with the Big Five personality characteristics. The third study compared a sample of 236 patients with confirmed Lyme disease with an online sample of 568 healthy individuals. Factor analysis results identified six underlying latent dimensions; four of these overlapped with critical symptoms identified by Horowitz - neuropathy, cognitive dysfunction, musculoskeletal pain, and fatigue. The HMQ showed acceptable levels of internal reliability using Cronbach's coefficient alpha and exhibited evidence of convergent and divergent validity. Components of the HMQ correlated more highly with each other than with unrelated traits. The results consistently demonstrated that the HMQ accurately differentiated those with Lyme disease from healthy individuals. Three migratory pain survey items (persistent muscular pain, arthritic pain, and nerve pain/paresthesias) robustly identified individuals with verified Lyme disease. The results support the use of the HMQ as a valid, efficient, and low

The research reactors their contribution to the reactors physics

International Nuclear Information System (INIS)

Barral, J.C.; Zaetta, A.; Johner, J.; Mathoniere, G.

2000-01-01

The 19 october 2000, the french society of nuclear energy organized a day on the research reactors. This associated report of the technical session, reactors physics, is presented in two parts. The first part deals with the annual meeting and groups general papers on the pressurized water reactors, the fast neutrons reactors and the fusion reactors industry. The second part presents more technical papers about the research programs, critical models, irradiation reactors (OSIRIS and Jules Horowitz) and computing tools. (A.L.B.)

The research reactors their contribution to the reactors physics; Les reacteurs de recherche leur apport sur la physique des reacteurs

Energy Technology Data Exchange (ETDEWEB)

Barral, J C [Electricite de France (EDF), 75 - Paris (France); Zaetta, A [CEA/Cadarache, Direction des Reacteurs Nucleaires, DRN, 13 - Saint-Paul-lez-Durance (France); Johner, J [CEA/Cadarache, Dept. de Recherches sur la Fusion Controlee (DRFC), 13 - Saint Paul lez Durance (France); Mathoniere, G [CEA/Saclay, DEN, 91 - Gif sur Yvette (France); and others

2000-07-01

The 19 october 2000, the french society of nuclear energy organized a day on the research reactors. This associated report of the technical session, reactors physics, is presented in two parts. The first part deals with the annual meeting and groups general papers on the pressurized water reactors, the fast neutrons reactors and the fusion reactors industry. The second part presents more technical papers about the research programs, critical models, irradiation reactors (OSIRIS and Jules Horowitz) and computing tools. (A.L.B.)

Prosa, poesía y sentimientos en la obra de Jules Supervielle

OpenAIRE

Gil-Cepeda Pérez, María de los Ángeles

1996-01-01

El artículo hace un repaso de la vida y obra de Jules Supervielle destacando la relación entre la poesía y la prosa, sus cuentos y la temática más significativa de su obra como son la muerte, la vida, las relaciones terrestres, el tiempo y el espacio, el más allá y la metamorfosis.

Direction of Nuclear Energy. Activity report 2010

International Nuclear Information System (INIS)

2011-11-01

This report proposes an overview of the research activities performed by the French DEN (Direction de l'Energie Nucleaire, Direction of Nuclear Energy) within the CEA. These activities address the future nuclear industrial systems (4. generation reactors, back-end of the future fuel cycle, basic scientific and technological research), the optimization of the industrial nuclear power (fuel cycle front end, second and third generation reactors, back-end of the present fuel cycle), major tools for the development of nuclear energy (simulation tools, Jules Horowitz reactor, value creation), clean up and dismantling of nuclear facilities (present status, the Passage project in Grenoble, the Aladin project in Fontenay-aux-Roses, projects at Marcoule, flow management of radioactive wastes, materials and disused fuels, transport). Three research centres are presented: Marcoule, Cadarache and Saclay

Testing the Joint UK Land Environment Simulator (JULES) for flood forecasting

Science.gov (United States)

Batelis, Stamatios-Christos; Rosolem, Rafael; Han, Dawei; Rahman, Mostaquimur

2017-04-01

Land Surface Models (LSM) are based on physics principles and simulate the exchanges of energy, water and biogeochemical cycles between the land surface and lower atmosphere. Such models are typically applied for climate studies or effects of land use changes but as the resolution of LSMs and supporting observations are continuously increasing, its representation of hydrological processes need to be addressed adequately. For example, changes in climate and land use can alter the hydrology of a region, for instance, by altering its flooding regime. LSMs can be a powerful tool because of their ability to spatially represent a region with much finer resolution. However, despite such advantages, its performance has not been extensively assessed for flood forecasting simply because its representation of typical hydrological processes, such as overland flow and river routing, are still either ignored or roughly represented. In this study, we initially test the Joint UK Land Environment Simulator (JULES) as a flood forecast tool focusing on its river routing scheme. In particular, JULES river routing parameterization is based on the Rapid Flow Model (RFM) which relies on six prescribed parameters (two surface and two subsurface wave celerities, and two return flow fractions). Although this routing scheme is simple, the prescription of its six default parameters is still too generalized. Our aim is to understand the importance of each RFM parameter in a series of JULES simulations at a number of catchments in the UK for the 2006-2015 period. This is carried out, for instance, by making a number of assumptions of parameter behaviour (e.g., spatially uniform versus varying and/or temporally constant or time-varying parameters within each catchment). Hourly rainfall radar in combination with the CHESS (Climate, Hydrological and Ecological research Support System) meteorological daily data both at 1 km2 resolution are used. The evaluation of the model is based on hourly runoff

Jules Verne : un processus d’écriture sous contraintes

OpenAIRE

Scheinhardt, Philippe

2013-01-01

Devenu célèbre, Jules Verne reçoit souvent la visite de journalistes qui l’interrogent aussi bien sur sa vie que sur son œuvre. De ces entretiens, il ressort que l’écrivain respecte comme tant d’autres des rites de création : habitudes de documentation, méthode de genèse littéraire. Ces rites, en écho à la contrainte externe du programme encyclopédique des Voyages extraordinaires, remplissent la fonction de contraintes internes au service de l’acte créateur. Ils renseignent sur les diverses p...

The State regains control of Areva

International Nuclear Information System (INIS)

Dupin, Ludovic

2014-01-01

This article first gives an overview of problems faced by Areva during the past years: financial losses, new delay for the Finnish EPR and for the French one in Flamanville, delay for the construction of the Jules Horowitz reactor, bad investments, high expenses in offshore wind energy and solar energy. The second part comments the decision taken by the government for a closer relationship between Areva and EDF, the perspectives for Areva associated with the extension of French reactor lifetime, new orientation of activities and definition of a new strategy for Areva

Jules Cotard (1840-1889): his life and the unique syndrome which bears his name.

Science.gov (United States)

Pearn, J; Gardner-Thorpe, C

2002-05-14

Dr. Jules Cotard (1840-1889) was a Parisian neurologist who first described the délire des négations. Cotard's syndrome or Cotard's delusion comprises any one of a series of delusions ranging from the fixed and unshakable belief that one has lost organs, blood, or body parts to believing that one has lost one's soul or is dead. In its most profound form, the delusion takes the form of a professed belief that one does not exist. Encountered primarily in psychoses such as schizophrenia and bipolar disorder, Cotard's syndrome has also been described in organic lesions of the nondominant temporoparietal cortex as well as in migraine. Cotard's delusion is the only self-certifiable syndrome of delusional psychosis. Jules Cotard, a Parisian neurologist and psychiatrist and former military surgeon, was one of the first to induce cerebral atrophy by the experimental embolization of cerebral arteries in animals and a pioneer in studies of the clinicopathologic correlates of cerebral atrophy secondary to perinatal and postnatal pathologic changes. He was the first to record that unilateral cerebral atrophy in infancy does not necessarily lead to aphasia and was also the pioneer of studies of altered conscious states in diabetic hyperglycemia.

RCC-MX (2008 edition)

International Nuclear Information System (INIS)

Bravo, X.; Drubay, B.

2008-10-01

The RCC-MX books is a compilation of design and construction rules for the mechanical materials of experimental reactors, for their auxiliaries and irradiation devices. This second edition includes the updates of references to NF, EN and ISO standards, the compliance with the regulations for nuclear pressure equipments, and the feedback since the 2005 edition. It comprises 9 books and a CD-Rom and includes a presentation document. The RCC-MX has been developed for the Jules Horowitz reactor but can be used for the design and construction of new projects of new experimental reactors or new equipments and devices for existing facilities. Content: - Book 1: general dispositions, materials for experimental reactors and their auxiliaries, for irradiation devices and for control or handling mechanisms, complementary requirements and particular dispositions; - Book 2: materials for the reactor and for its level 1 auxiliaries; - Book 3: materials for the reactor and for its level 2 and level 3 auxiliaries, control and handling mechanisms, materials for irradiation devices; - Book 4: technical appendixes - materials characteristics (steels and alloys); - Book 5: technical appendixes (design rules); - Book 6: technical specifications of materials; - Book 7: tests and control methods; - Book 8: welding; - Book 9: fabrication. (J.S.)

In core instrumentation for online nuclear heating measurements of material testing reactor

International Nuclear Information System (INIS)

Reynard, C.; Andre, J.; Brun, J.; Carette, M.; Janulyte, A.; Merroun, O.; Zerega, Y.; Lyoussi, A.; Bignan, G.; Chauvin, J-P.; Fourmentel, D.; Glayse, W.; Gonnier, C.; Guimbal, P.; Iracane, D.; Villard, J.-F.

2010-01-01

The present work focuses on nuclear heating. This work belongs to a new advanced research program called IN-CORE which means 'Instrumentation for Nuclear radiations and Calorimetry Online in REactor' between the LCP (University of Provence-CNRS) and the CEA (French Atomic Energy Commission) - Jules Horowitz Reactor (JHR) program. This program started in September 2009 and is dedicated to the conception and the design of an innovative mobile experimental device coupling several sensors and ray detectors for on line measurements of relevant physical parameters (photonic heating, neutronic flux ...) and for an accurate parametric mapping of experimental channels in the JHR Core. The work presented below is the first step of this program and concerns a brief state of the art related to measurement methods of nuclear heating phenomena in research reactor in general and MTR in particular. A special care is given to gamma heating measurements. A first part deals with numerical codes and models. The second one presents instrumentation divided into various kinds of sensor such as calorimeter measurements and gamma ionization chamber measurements. Their basic principles, characteristics such as metrological parameters, operating mode, disadvantages/advantages, ... are discussed. (author)

CEA nuclear energy Directorate - Activity report 2012

International Nuclear Information System (INIS)

2013-01-01

After an overview of the activities of the Directorate at the international level, of its scientific activities, and of the consideration given to quality, and a presentation of the transverse program on advanced materials, this report proposes presentations of activities in different domains: future nuclear industrial systems (reactors of 4. generation, back-end of the future cycle, sustainable management of nuclear materials, fundamental scientific and technological research), optimization of the present industrial nuclear activity (reactors of 2. and 3. generation, front-end and back-end of the fuel cycle), the main tools for nuclear development (numerical simulation, the Jules Horowitz reactor), valorisation, economic support of Haute-Marne and Meuse territories (the Syndiese project), nuclear dismantling and decontamination (dismantling projects, projects and works in Fontenay-aux-Roses, Grenoble and Saclay, waste and material flow management, nuclear service facilities, transports). It also presents the activities of some specific CEA centres like Marcoule (R and D in fuel cycle), Cadarache (future energies) and Saclay (nuclear sciences and simulation of reactors and fuel cycle)

In-core program for on line measurements of neutron, photon and nuclear heating parameters inside Jules Horowitz MTR reactor

International Nuclear Information System (INIS)

Lyoussi, A.; Reynard-Carette, C.

2014-01-01

Accurate on-line measurements of key parameters inside experimental channels of Material Testing Reactor are necessary to dimension the irradiation devices and consequently to conduct smart experiments on fuels and materials under suitable conditions. In particular the quantification of nuclear heating, a relevant parameter to reach adapted thermal conditions, has to be improved. These works focus on an important collaborative program between CEA and Aix-Marseille University called INCORE (Instrumentation for Nuclear radiations and Calorimetry On-line in Reactor) dedicated to the development of a new measurement methodology to quantify both nuclear heating and accurate radiation flux levels (neutrons and photons). The methodology, which is based on experiments carried out under irradiation conditions with a multi-sensor device (ionization chamber, fission chamber, gamma thermometer, calorimeter, SPND, SPGD) as well as works performed out-of nuclear/radiative environment on a reference sensor used to measure nuclear heating (calorimeter), is presented (authors)

RJH seminar

International Nuclear Information System (INIS)

2003-01-01

This document gathers the slides that have been presented at the Jules Horowitz reactor (RJH) seminar. RJH is the next experimental reactor to be built in France, it will be commissioned in 2013. Its main characteristics are: - power: 100 MW - coolant and moderator: water (input water temperature 25 C, exit water temperature 41 C), down to up flow inside the core - reflector: water and beryllium - maximal enrichment: 19,75 % - mass of 235 U: 21 kg - fast neutron flux (>0,907 MeV): 6,4.10 14 n.cm -2 .s -1 - thermal neutron flux ( 14 n.cm -2 .s -1 . The contributions can be classed into 6 topics: 1) presentation of RJH, 2) site studies, 3) its irradiation capacities, 4) calculation tools for its design (neutronic, photonic, fluid flow and heat transfer), 5) materials (aluminium alloys, mechanical resistance, welding, corrosion resistance), and 6) UMo nuclear fuel (fabrication, reprocessing). (A.C.)

[Professor Jules Gavarret (1809-1890) and the application of mathematics and physics to medicine].

Science.gov (United States)

Beyneix, A

2001-01-01

Professor Jules Gavarret has undertaken pretigious offices, has accumulated various titles and honours and has left an abundant bibliography about physics and chemistry of life phenomenon. To recount the career of one of the academics who were benefited the traditional medicine of the progress achieved in physical and mathematical sciences give us the opportunity of recalling one of the great Parisian personalities of 19th Century who had not been appreciated for too long.

Jules Verne: de la odisea a la ciencia ficción

OpenAIRE

Javier Rodriguez Pequeño

2018-01-01

El artículo pretende recordar el importante papel que jugó Jules Verne en la moderna literatura fantástica. Sus Viajes extraordinarios modernizan la odisea clásica y, gracias a la incorporación de la ciencia y a la importancia que concede a la verosimilitud dentro de lo fantástico, crea la ciencia ficción, al tiempo que crea una literatura fantástica basada no el terror, como era común en su época, sino en la fascinación. La utopía es un género muy antiguo pero no le sucede lo mismo a la dist...

Jules Verne, la géogenèse des diamants et la revue Nature

OpenAIRE

Bollinger , Jean-Claude

2015-01-01

International audience; Browsing through recent issues of the respected scientific journal Nature, the author has found a number of explicit references to Jules Verne’s famous novel "Journey to the Center of the Earth". For example, in a paper about the analysis of a solid inclusion within a diamond, diamond formation from a solution is mentioned. But this is in fact a main topic within another and lesser known novel, "The Southern Star". Then a discussion concerning diamond formation is pres...

Comparison of the Thermal Response of Two Calorimetric Cells Dedicated to Nuclear Heating Measurements during Calibration

International Nuclear Information System (INIS)

Brun, J.; Reynard, C.; De-Vita, C.; Carette, M.; Muraglia, M.; Lyoussi, A.; Fourmentel, D.; Guimbal, P.; Villard, J-F.

2013-06-01

Nuclear heating is a key parameter which contributes to the thermal design and the quality of in-pile experiments performed in Material Testing Reactors (MTRs) for the study of nuclear materials and fuels under irradiation. Nuclear heating is typically measured in MTRs by radiometric calorimeters. However this kind of sensor has to be suited and improved in perspective of the new experimental conditions inside the channels of Jules Horowitz Reactor (JHR). In this paper, we study the responses of two non adiabatic differential calorimeter cells having the same geometric design, but different dimensions. These experimental works are carried out during a preliminary out-of-pile calibration operating procedure of these sensors which consists in simulating the sample heating by Joule effect. The influence of the imposed electrical power and of the forced cooling flow is determined on the sensor calibration curves. A more sensitive sensor leads to a quadratic calibration curve. This behavior difference of the two calorimetric configurations is explained by means of temperature and heat flux measurements performed with a new instrumented jacket. (authors)

Tensile and fracture behavior of AA6061-T6 aluminum alloys: micro-mechanical approach

International Nuclear Information System (INIS)

Shen, Y.

2012-01-01

The AA6061-T6 aluminum alloy was chosen as the material for the core vessel of the future Jules Horowitz testing reactor (JHR). The objective of this thesis is to understand and model the tensile and fracture behavior of the material, as well as the origin of damage anisotropy. A micro-mechanical approach was used to link the microstructure and mechanical behavior. The microstructure of the alloy was characterized on the surface via Scanning Electron Microscopy and in the 3D volume via synchrotron X-ray tomography and laminography. The damage mechanism was identified by in-situ SEM tensile testing, ex-situ X-ray tomography and in-situ laminography on different levels of triaxiality. The observations have shown that damage nucleated at lower strains on Mg 2 Si coarse precipitates than on iron rich intermetallics. The identified scenario and the in-situ measurements were then used to develop a coupled GTN damage model incorporating nucleation, growth and coalescence of cavities formed by coarse precipitates. The relationship between the damage and the microstructure anisotropies was explained and simulated. (author)

Analysis of Media Stereotypes of the Russian Image in Media Studies in the Student Audience (example: the screen versions of Jules Verne's Novel “Michael Strogoff”

Directory of Open Access Journals (Sweden)

Alexander Fedorov

2014-09-01

Full Text Available As a result of the analysis students come to the conclusion that the screen adaptations of Jules Verne's novel ''Michael Strogoff'' create, though an oversimplified and adapted to western stereotypes of perception, but a positive image of Russia – as a stronghold of European values at the Asian frontiers, a country with a severe climate, boundless Siberian spacious areas, manly and patriotic warriors, a wise monarchy. At the same time, both Jules Verne's novel and its screen adaptations contain clear-cut western pragmatism – the confidence that if a man has a proper will he can rule his destiny.

First feedback with the AMMON integral experiment for the JHR calculations

Directory of Open Access Journals (Sweden)

Lemaire M.

2013-03-01

Full Text Available The innovative design of the next international Material Testing Reactor, the Jules Horowitz Reactor (JHR, induced the development of a new neutron and photon calculation formular HORUS3D/P&N, based on deterministic and stochastic codes and the European nuclear data library JEFF3.1.1. A new integral experiment, named the AMMON experiment, was designed in order to make the experimental validation of HORUS3D. The objectives of this experimental program are to calibrate the biases and uncertainties associated with the HORUS3D/N&P calculations for JHR safety and design calculations, but also the validation of some specific nuclear data (concerning mainly hafnium and beryllium isotopes. The experiment began in 2010 and is currently performed in the EOLE zero-power critical mock-up at CEA Cadarache. This paper deals with the first feedback of the AMMON experiments with 3D Monte Carlo TRIPOLI4©/JEFF3.1.1 calculations.

Sharp and the Jules Verne Launcher

Science.gov (United States)

Hunter, John; Cartland, Harry

1996-03-01

Lawrence Livermore National Laboratory (LLNL) has built the worlds largest hydrogen gas gun called SHARP, (Super High Altitude Research Project). Originally designed to launch 5 kg to a 450 km altitude, SHARP is configured horizontally at Site 300 in Tracy, California. SHARP is successfully delivering 5 kg scramjets at Mach 9 in aerophysics tests. Some of the results of the scramjet tests are enlightening and are presented insofar as they are relevant to future launches into space. Using a light gas gun to launch payloads into orbit has been analyzed. We look at LEO (Low Earth Orbit), GEO (Geosynchronous Earth Orbit), and LO (Lunar Orbit). We present a conceptual design for a large light gas gun called the Jules Verne Launcher (JVL). The JVL can deliver 3.3 metric tons to a 500 km low earth orbit. We anticipate one launch per day. We present the history of light gas guns, the SHARP design and performance, and the JVL design. Another section is devoted to the vehicle environment and resultant design. Lastly, we present a cost analysis. Our results indicated that the JVL will be able to deliver 1000 metric tons of payload to LEO yearly. The cost will be 5% of the best US rocket delivery cost. This technology will enable the next phase of man's exploration of space.

Incorporating JULES into NASA's Land Information System (LIS) and Investigations of Land-Atmosphere Coupling

Science.gov (United States)

Santanello, Joseph

2011-01-01

NASA's Land Information System (LIS; lis.gsfc.nasa.gov) is a flexible land surface modeling and data assimilation framework developed over the past decade with the goal of integrating satellite- and ground-based observational data products and advanced land surface modeling techniques to produce optimal fields of land surface states and fluxes. LIS features a high performance and flexible design, and operates on an ensemble of land surface models for extension over user-specified regional or global domains. The extensible interfaces of LIS allow the incorporation of new domains, land surface models (LSMs), land surface parameters, meteorological inputs, data assimilation and optimization algorithms. In addition, LIS has also been demonstrated for parameter estimation and uncertainty estimation, and has been coupled to the Weather Research and Forecasting (WRF) mesoscale model. A visiting fellowship is currently underway to implement JULES into LIS and to undertake some fundamental science on the feedbacks between the land surface and the atmosphere. An overview of the LIS system, features, and sample results will be presented in an effort to engage the community in the potential advantages of LIS-JULES for a range of applications. Ongoing efforts to develop a framework for diagnosing land-atmosphere coupling will also be presented using the suite of LSM and PBL schemes available in LIS and WRF along with observations from the U. S .. Southern Great Plains. This methodology provides a potential pathway to study factors controlling local land-atmosphere coupling (LoCo) using the LIS-WRF system, which will serve as a testbed for future experiments to evaluate coupling diagnostics within the community.

William Butcher, Jules Verne inédit, les manuscrits déchiffrés

OpenAIRE

Merello, Ida

2016-01-01

Les textes de Jules Verne sont des palimpsestes. Ils le sont au sens figuré, nous le savions déjà. Mais ils le sont également au sens propre, comme le montre le bel ouvrage de William Butcher. Ce dernier s’est donné pour objectif d’analyser les manuscrits de Verne parvenus jusqu’à nous. La ressource semble inépuisable : des milliers et des milliers de pages autographes à déchiffrer, à défricher. William Butcher s’est plongé dans ce labeur avec enthousiasme et il en tire de nombreuses informat...

Catálogo de los puentes proyectados por Jules Sagebien en la provincia de Matanzas.

OpenAIRE

Luis R. González Arestuche; C. J. Rolo Pico; Rubén A. Delgado Rodríguez

2014-01-01

Esta investigación recopila en documento único, el mejor quehacer de uno de los principales forjadores de Matanzas como ciudad y del desarrollo industrial inicial, alcanzado en el siglo XIX, para la demarcación. El respeto hacia la conservación y el rescate del patrimonio construido en la actual provincia homónima, por sus altísimos valores: histórico, cultural y tecnológico, considera la necesidad del conocimiento ciudadano sobre la actividad del francés Jules Sagebien Tavernier. Desde el añ...

[Scientific contributions of Jules Hirsch regarding the physiopathogenesis of obesity].

Science.gov (United States)

Zárate, Arturo; Manuel, Leticia

2016-01-01

Jules Hirsch was born in New York City and died at age 88 after a long illness. He was considered notorious leader in the study of human metabolism mainly in the area of lipids and obesity. His research at The Rockefeller University helps establish the mechanism of obesity and lipids metabolism. Hirsch joined Rockefeller´s faculty in 1954 and remained there for the rest of his career. Hirsch´s research helped to support the idea of dynamic interactions among diet, physical activity, general metabolism and obesity. At that time most scientific considered adipose tissue to be biologically inert such as a passive insulator in which the body reserved energy in the form of triglycerides. Hirsch had a natural characteristic of showing a nice smile and greeting for everyone he worked with at the university. Another important contribution was there relationship between diet and cardiovascular ailments as well as metabolism disturbance.

POSITIVISM, INDUSTRIAL REVOLUTION AND URBANISM - UTOPIA AND REALITY IN THE JULES VERNE'S NOVEL "THE BEGUM'S FORTUNE"

Directory of Open Access Journals (Sweden)

Daniel H. Valsecchi

2009-01-01

Full Text Available The aim of this article is to analyze negative consequences (social, political, psychological and so forth of utopian projects, which crippled society and people by negation of reality and at the same time oblige them to accept these plans. In order to do this we analyze characteristics of two constructions which are thoroughly depicted by Jules Verne: an Arms Fabric (Stahlstadt and a city which was mathematically built (France Ville. Furthermore there are reflections about positivism - i.e. the ground of these projects.

Nuclear. Areva, a French fission

International Nuclear Information System (INIS)

Dupin, Ludovic

2015-01-01

This article comments the difficulties and problems faced by Areva for its activity of nuclear reactor construction, and which leaded to the transfer of this activity from Areva to EDF while Areva will keep its uranium providing and fuel enrichment activities. These difficulties and problems concern the Flamanville EPR (the construction is 5 years late, vessel defects have just been identified, cost overruns), the Finnish EPR (7 years late, a 5 billions cost overrun), the Jules Horowitz research reactor (5 years late, cost overrun), and strategic choices (notably with respect to the post-Fukushima context). The article also outlines that other activities (mining, enrichment, reactor maintenance) are still doing well, and then briefly discusses the future of Areva NP

RJH seminar; Seminaire RJH du 7 mars 2003

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-07-01

This document gathers the slides that have been presented at the Jules Horowitz reactor (RJH) seminar. RJH is the next experimental reactor to be built in France, it will be commissioned in 2013. Its main characteristics are: - power: 100 MW - coolant and moderator: water (input water temperature 25 C, exit water temperature 41 C), down to up flow inside the core - reflector: water and beryllium - maximal enrichment: 19,75 % - mass of {sup 235}U: 21 kg - fast neutron flux (>0,907 MeV): 6,4.10{sup 14} n.cm{sup -2}.s{sup -1} - thermal neutron flux (<0,625 eV) inside the reflector on aluminium block: 7,3.10{sup 14} n.cm{sup -2}.s{sup -1}. The contributions can be classed into 6 topics: 1) presentation of RJH, 2) site studies, 3) its irradiation capacities, 4) calculation tools for its design (neutronic, photonic, fluid flow and heat transfer), 5) materials (aluminium alloys, mechanical resistance, welding, corrosion resistance), and 6) UMo nuclear fuel (fabrication, reprocessing). (A.C.)

“Letter to the King” By Jules Destry: from Separatism to Unitarism in Belgium

Directory of Open Access Journals (Sweden)

Ella V. Ermakova

2016-01-01

Full Text Available Contradictions between the regions of Belgium - Wallonia and Flanders - have a long history associated with uneven political, economic and cultural development of the territories, which in 1830 became parts of an independent state, the Kingdom of Belgium. The "Letter to the King", written by eminent Belgian politician and writer, socialist Jules Destree (1863 - 1936 gg., is one of the most interesting sources on the history of Belgium of this period, It became a kind of manifesto of balance between the ideas of separatism and unitarianism. This article includes excerpts from the "Letter to the King", which were given for the first time in the author's Russian translation and conducted historical criticism of the source. The study is based on a set of scientific methods and approaches, including the principle of scientific objectivity and systematic approach, used in historical research. The main methods are problematic and historical-comparative analysis, classification and comparison of political and historical concepts. An external source of criticism included information about the place and the time of the creation of document, the biography of the author studies; internal critic source recreates the idea of the letter and the background of historical events. Prominent Belgian politician and writer, socialist Jules Destree (1863 - 1936, highly appreciated the personal qualities of King Albert I, appealed to his experience and political vision, describing all the problems Walloons faced in their opposition to the Flemish. Destree in his letter opposed the unequal development of the regions of Belgium and the protectionist policies of the central government in respect to the detriment of Flanders Wallonia. He summarized and formulated the factors that, in his opinion, interfere with the full development of his country. Destree pays great attention to linguistic differences, which were at the heart of conflicts between Walloons and Flemings, and

2012 review of French research reactors

International Nuclear Information System (INIS)

Estrade, Jerome

2013-01-01

Proposed by the French Reactor Operators' Club (CER), the meeting and discussion forum for operators of French research reactors, this report first gives a brief presentation of these reactors and of their scope of application, and a summary of highlights in 2012 for each of them. Then, it proposes more detailed presentations and reviews of characteristics, activities, highlights, objectives and results for the different types of reactors: neutron beam reactors (Orphee, High flux reactor-Laue-Langevin Institute or HFR-ILL), technological irradiation reactors (Osiris and Phenix), training reactors (Isis and Azur), reactors for safety research purposes (Cabri and Phebus), reactors for neutronic studies (Caliban, Prospero, Eole, Minerve and Masurca), and new research reactors (the RES facility and the Jules Horowitz reactor or JHR)

Jules Verne's Captain Nemo and French Revolutionary Gustave Flourens:A Hidden Character Model?

Directory of Open Access Journals (Sweden)

Leonidas Kallivretakis

2005-01-01

Full Text Available This article treats the recent assumption made by Vernian specialist William Butcher that Jules Verne's most famous character, Captain Nemo, is based on the French revolutionary intellectual Gustave Flourens (1838-1871, son of the eminent physiologist J. P. M. Flourens. Gustave Flourens fought in the Cretan insurrection of 1866-1868, later participated in the republican opposition against Napoleon III's imperial regime, eventually became a friend of Karl Marx and was finally killed as a general of the Paris Commune. By comparing step-by-step Verne's inspiration and writing procedures with Flourens' unfolding activities and fame, it is concluded that there is little basis for such an assumption. The article includes also a brief account of the Cretan question in the nineteenth century and of the deep discord between Marx's and Flourens' respective analyses of the Eastern Question.

Study of microstructural evolutions of the 6061-T6 aluminium alloy under irradiation

International Nuclear Information System (INIS)

Flament, Camille

2015-01-01

The 6061-T6 Aluminium alloy, whose microstructure contains Al(Fe,Mn,Cr)Si dispersoids and hardening needle-shaped β'' precipitates (Mg, Si), has been chosen as the structural material for the core vessel of the Material Testing Jules Horowitz Nuclear Reactor. Because it will be submitted to high neutron flux at a temperature around 50 C, it is necessary to study microstructural evolutions induced by irradiation and especially the stability of the second phase particles. In this work, an analytical study by in-situ and ex-situ electron and ion irradiations has been performed, as well as a study under neutron irradiation. The precipitate characterization by Transmission Electron Microscopy demonstrates that Al(Fe,Mn,Cr)Si dispersoids are driven under irradiation towards their equilibrium configuration, consisting of a core/shell structure, enhanced by irradiation, with a (Fe, Mn) enriched core surrounded by a Cr-enriched shell. In contrast, the (Mg,Si) β'' precipitates are destabilized by irradiation. They dissolve under ion irradiation in favor of a new precipitation of (Mg,Si,Cu,Cr,Al) rich clusters resulting in an increase of the alloy's hardness. β'' precipitates tend towards a transformation to cubic precipitates under neutron irradiation. (author) [fr

William Butcher, Jules Verne inédit : les manuscrits déchiffrés, Lyon, ENS Éditions, coll. « Métamorphoses du livre », 2015, 490 p.

OpenAIRE

Scheinhardt, Philippe

2016-01-01

C’est un travail de recherche conséquent sur le fonds manuscrit de Jules Verne que propose William Butcher. Ce chercheur anglophone s’intéresse depuis longtemps à la diffusion de cette œuvre qu’il a éditée et traduite. Le goût de la recherche, de la découverte s’affiche dans le titre Jules Verne inédit, avec une désignation de l’objet d’étude, qui ne concerne pas tant le manuscrit que son exégèse, puisqu’on nous invite avec le sous-titre Les manuscrits déchiffrés à l’interprétation des traces...

Calculation to experiment comparison of SPND signals in various nuclear reactor environments

Energy Technology Data Exchange (ETDEWEB)

Barbot, Loic; Radulovic, Vladimir; Fourmentel, Damien [CEA, DEN, DER, Instrumentation, Sensors and Dosimetry Laboratory, Cadarache, F-13108 St-Paul-Lez-Durance, (France); Snoj, Luka [Jozef Stefan Institute, Jamova cesta 39, SI-1000 Ljubljana, (Slovenia); Tarchalski, Mikolaj [National Centre for Nuclear Research, ulica Andrzeja Soltana 7, 05-400 Otwock (Swierk), (Poland); Dewynter-Marty, Veronique [CEA, DEN, DANS, DRSN, SIREN, LESCI, Saclay, F-91191 Gif sur Yvette, (France); Malouch, Fadhel [CEA, DEN, DANS, DM2S, SERMA, Saclay, F-91191 Gif sur Yvette, (France)

2015-07-01

In the perspective of irradiation experiments in the future Jules Horowitz Reactor (JHR), the Instrumentation Sensors and Dosimetry Laboratory of CEA Cadarache (France) is developing a numerical tool for SPND design, simulation and operation. In the frame of the SPND numerical tool qualification, dedicated experiments have been performed both in the Slovenian TRIGA Mark II reactor (JSI) and very recently in the French CEA Saclay OSIRIS reactor, as well as a test of two detectors in the core of the Polish MARIA reactor (NCBJ). A full description of experimental set-ups and neutron-gamma calculations schemes are provided in the first part of the paper. Calculation to experiment comparison of the various SPNDs in the different reactors is thoroughly described and discussed in the second part. Presented comparisons show promising final results. (authors)

THE WITCH: A VETO-EUROPEAN MEMORY THROUGH HISTORIAN JULES MICHELET

Directory of Open Access Journals (Sweden)

Mónica Elivier Sánchez-González

2017-01-01

Full Text Available Reflections about the witch are presented as a challenge that goes through different dimensions. The first is the inaccessibility to a figure that modern societies closed down. However, the Witch encouraged the everyday life of pre-modern societies and peripherical spaces to the central modernity, but the witch still in these spaces. This paradox framing the following discussion. How could pose a witch access to medieval times, without transgressing its rapporteur and impose conditions on it current possibility? The proposal here arises is to work the text of nineteenth-century French historian Jules Michelet as a semantic, where resources of a pre- modern memory, which, to the extent that defines the witch, defines the society in which it is played are played. This paper is not concerned if the witch was real or not, whether or not it was true. Here he retraces his attributes as practices realized veteroeurpea otherness of society, in this case, the exclusion rested with women, the devil, evil. This work is not conclusive, its function is to present a way of looking at the witch, wondering from a specific theoretical corpus: the analysis of memory from systems theory Niklas Luhmann can be formulated.

A critique and empirical assessment of Alexandra Horowitz and Julie Hecht's "Examining dog-human play: the characteristics, affect, and vocalizations of a unique interspecific interaction".

Science.gov (United States)

Mitchell, Robert W

2017-05-01

Horowitz and Hecht (Anim Cog 19:779-788, 2016) presented data about activities and vocalizations during brief videotaped dog-owner play provided by owners, examined these in relation to human affect during play, and made comparisons from their results to other research on activities and vocalizations during dog-human play. In this critique, I describe problems with Horowitz and Hecht's methodology, analyses, and evidence; in their interpretations of the data, evidence, and categorizations provided in other research, particularly my own studies of dog-human play; and in their claims of novelty for their findings. I argue that, to support their ideas about vocalizations and play types during dog-human play and their comparisons to other studies, their study requires fuller descriptions and reliability for their coding of vocalizations and play types, appropriate statistical analyses, and accurate descriptions of prior research. I also argue that their methodology provides results strikingly similar in many aspects to those of other researchers studying dog-human play, contrary to their claims of novel findings. Finally, I examine their suggestions about relationships between human affect and types of play activities and vocalizations using the videos of dog-human play I discussed in earlier publications, discovering minimal, if any, relationship.

Energies and bounds from perturbative approximations to the Bloch-Horowitz effective Hamiltonian

International Nuclear Information System (INIS)

Darema-Rogers, F.; Vincent, C.M.

1978-01-01

Bloch-Horowitz perturbation theory is applied to the calculation of approximate energies and model-space eigenvectors, for the solvable large-matrix Hamiltonian H used by Pittel, Vincent, and Vergados. Two types of upper and lower bounds to the energies are discussed: moment-theory bounds, obtained by applying moment theory to the terms of perturbation theory, and norm bounds, derived from the expectation E-bar and variance sigma 2 of H with respect to an eigenvector approximated by nth order perturbation theory (n < or = 6). It is shown that lower bounds cannot be constructed unless some fourth-order quantity is known. The upper bounds are generally stricter than the lower bounds. All of the bounds apply even when back-door intruder states cause perturbation theory to diverge; but they lose their rigor and become ''quasibounds'' when there are physical intruders. The moment-theory and norm lower quasibounds always require estimation of a parameter. For the solvable Hamiltonians, it is shown that this can be done quite reliably, and that the resulting quasibounds are tight enough to have some practical utility. The energy-independent effective interaction V is constructed and its errors are displayed and discussed. Finally, a certain [1/2] pseudo-Pade approximant is empirically shown to give energies with a mean absolute error of less than 0.3 MeV in all cases

Water Will Be the Coal of the Future—The Untamed Dream of Jules Verne for a Solar Fuel

Directory of Open Access Journals (Sweden)

Vladimir K. Ryabchuk

2016-11-01

Full Text Available This article evokes the futuristic visions of two giants, one a writer, Jules Verne, who foresaw water as the coal of the future, and the other a scientist, Giacomo Ciamician, who foresaw the utilization of solar energy as an energy source with which to drive photochemical and photocatalytic reactions for the betterment of mankind. Specifically, we examine briefly the early work of the 1960s and 1970s on the photosplitting of free water and water adsorbed on solid supports, based mostly on metal oxides, from which both hydrogen and oxygen evolve in the expected stoichiometric ratio of 2 to 1. The two oil crises of the 1970s (1973 and 1979 spurred the interest of researchers from various disciplines (photochemistry, photo-catalysis and photoelectrochemistry in search of a Holy Grail photocatalyst, process, or strategy to achieve efficient water splitting so as to provide an energy source alternative to fossil fuels. Some approaches to the photosplitting of water adsorbed on solid insulators (high bandgap materials; Ebg ≥ 5 eV and semiconductor photocatalysts (metal oxides are described from which we deduce that metal oxides with bandgap energies around 5 eV (e.g., ZrO2 are more promising materials to achieve significant water splitting on the basis of quantum yields than narrower bandgap photocatalysts (e.g., TiO2; Ebg ≈ 3.0–3.2 eV, which tend to be relatively inactive by comparison. Although proof of concept of the photosplitting of water has been demonstrated repeatedly in the last four decades, much remains to be done to find the Holy Grail photocatalyst and/or strategy to achieve significant yields of hydrogen.

JHR Project: a future Material Testing Reactor working as an International user Facility: The key-role of instrumentation in support to the development of modern experimental capacity

Energy Technology Data Exchange (ETDEWEB)

Bignan, G. [CEA, DEN, DER, JHR user Facility Interface Manager' , Cadarache, F-13108 St-Paul-Lez-Durance (France); Gonnier, C. [CEA, DEN, DER, SRJH Jules Horowitz Reactor Service, Cadarache, F-13108 St-Paul-Lez-Durance (France); Lyoussi, A.; Villard, J.F.; Destouches, C. [CEA, DEN, DER, Instrumentation Sensors and Dosimetry Laboratory, Cadarache, F-13108 St-Paul-Lez-Durance (France); Chauvin, J.P. [CEA,DEN, DER, SPEX, Experimental Physics Service, Cadarache, F-13108 St-Paul-Lez-Durance (France); Maugard, B. [CEA, DEN, DER, Reactor Department Studies, Cadarache, F-13108 St-Paul-Lez-Durance (France)

2015-07-01

Research and development on fuel and material behaviour under irradiation is a key issue for sustainable nuclear energy in order to meet specific needs by keeping the best level of safety. These needs mainly deal with a constant improvement of performances and safety in order to optimize the fuel cycle and hence to reach nuclear energy sustainable objectives. A sustainable nuclear energy requires a high level of performances in order to meet specific needs such as: - Pursuing improvement of the performances and safety of present and coming water cooled reactor technologies. This will require a continuous R and D support following a long-term trend driven by the plant life management, safety demonstration, flexibility and economics improvement. Experimental irradiations of structure materials are necessary to anticipate these material behaviours and will contribute to their optimisation. - Upgrading continuously nuclear fuel technology in present and future nuclear power plants to achieve better performances and to optimise the fuel cycle keeping the best level of safety. Fuel evolution for generation II, III and III+ is a key stake requiring developments, qualification tests and safety experiments to ensure the competitiveness and safety: experimental tests exploring the full range of fuel behaviour determine fuel stability limits and safety margins, as a major input for the fuel reliability analysis. To perform such accurate and innovative progress and developments, specific and ad hoc instrumentation, irradiation devices, measurement methods are necessary to be set up inside or beside the material testing reactor (MTR) core. These experiments require beforehand in situ and on line sophisticated measurements to accurately determine different key parameters such as thermal and fast neutron fluxes and nuclear heating in order to precisely monitor and control the conducted assays. The new Material Testing Reactor JHR (Jules Horowitz Reactor) currently under

« Jules Crevaux, l’explorateur aux pieds nus ». Un mythe géographique amazonien

Directory of Open Access Journals (Sweden)

Emmanuel Lézy

2008-12-01

Full Text Available Le rejet par Claude Lévi Strauss du personnage de l’explorateur organise son exploration de l’Amazonie autant que sa quête de l’Indien. Le scientifique, entre les deux, est situé dans une position équidistante entre la clairvoyance et l’aveuglement. Le « voyage » frappé de la même opprobre est présenté, de façon similaire comme un travestissement du nomadisme indigène. L’exploration des régions du totémisme ou de l’animisme est décrite comme une activité cérébrale, intellectuelle, passant par  l’identification des structures fondamentales de mythes chargés d’organiser la connaissance du monde et ne devant pas grand chose au nécessaire mouvement des pieds. Pourtant, en observant attentivement la polarité doublement négative des pieds d’un explorateur de l’Amazonie, Jules Crevaux, on découvre des structures communes au territoire parcouru et au mythe moderne qui confirment de façon paradoxale la pertinence des analyses de l’anthropologue.The rejection by Lévi Strauss of the explorer organise his own exploration of Amazonia as much as his quest for the Indian. The scientist, between those two characters, holds a medium position between blindness and foresight. The « voyage », stuck by the same despise, is presented as a caricature of indigenous nomadism. The exploration of the countries of totemism and animism is described as a mental, intelectual activity based on the identification of the fundamental structures of the myths organising the knowledge of the world which has nothing to do with the necessary movement of the feet. Nevertheless, the carefull observation of the feet of an amazonian explorer, Jules Crevaux (1847-1882, reveals structures which are common to the covered territory and to a modern mythology. This structures give an unexpected confirmation of the efficiency of the anthropologist’s analyses.

Qualification of an out-of-pile Thermohydraulic test Bench (BETHY) developed to calibrate calorimetric cells under specific JHR experimental conditions

International Nuclear Information System (INIS)

De Vita, C.; Brun, J.; Carette, M.; Reynard-Carette, C.; Lyoussi, A.; Fourmentel, D.; Villard, J.F.; Guimbal, P.; Malo, J.Y.

2013-06-01

Online in-pile measurement methods are crucial during irradiations in material testing reactors to better understand the behavior of materials under accelerated ageing conditions and of nuclear fuels under high irradiation levels. Thus, the construction of a new Material Testing Reactor such as the Jules Horowitz Reactor (JHR) leads to new research and development programs devoted to innovative instrumentation and measurement methods. The presented works are performed in the framework of the IN-CORE program, 'Instrumentation for Nuclear radiations and Calorimetry Online in Reactor', between CEA and Aix-Marseille University. The program aim is to develop experimental devices and test bench to quantify more precisely the nuclear heating parameter in the JHR experimental channels. This in-pile parameter is usually measured by means of calorimeter or gamma thermometer. This paper focuses on a new out-of-pile test bench called BETHY. This bench was developed to study the response of a differential calorimeter during its preliminary calibration step according to specific thermal and hydraulic conditions occurring inside one type of JHR core channel. The first section of this paper is dedicated to a detailed description of the bench. The second part presents the study of the thermal characteristics established in the bench for two main thermal running modes. The last one concerns the calibration curve of the reference cell of the differential calorimeter in the case of homogenous temperature. (authors)

Love stories can be unpredictable: Jules et Jim in the vortex of life.

Science.gov (United States)

Dercole, Fabio; Rinaldi, Sergio

2014-06-01

Love stories are dynamic processes that begin, develop, and often stay for a relatively long time in a stationary or fluctuating regime, before possibly fading. Although they are, undoubtedly, the most important dynamic process in our life, they have only recently been cast in the formal frame of dynamical systems theory. In particular, why it is so difficult to predict the evolution of sentimental relationships continues to be largely unexplained. A common reason for this is that love stories reflect the turbulence of the surrounding social environment. But we can also imagine that the interplay of the characters involved contributes to make the story unpredictable-that is, chaotic. In other words, we conjecture that sentimental chaos can have a relevant endogenous origin. To support this intriguing conjecture, we mimic a real and well-documented love story with a mathematical model in which the environment is kept constant, and show that the model is chaotic. The case we analyze is the triangle described in Jules et Jim, an autobiographic novel by Henri-Pierre Roché that became famous worldwide after the success of the homonymous film directed by François Truffaut.

Love stories can be unpredictable: Jules et Jim in the vortex of life

Science.gov (United States)

Dercole, Fabio; Rinaldi, Sergio

2014-06-01

Love stories are dynamic processes that begin, develop, and often stay for a relatively long time in a stationary or fluctuating regime, before possibly fading. Although they are, undoubtedly, the most important dynamic process in our life, they have only recently been cast in the formal frame of dynamical systems theory. In particular, why it is so difficult to predict the evolution of sentimental relationships continues to be largely unexplained. A common reason for this is that love stories reflect the turbulence of the surrounding social environment. But we can also imagine that the interplay of the characters involved contributes to make the story unpredictable—that is, chaotic. In other words, we conjecture that sentimental chaos can have a relevant endogenous origin. To support this intriguing conjecture, we mimic a real and well-documented love story with a mathematical model in which the environment is kept constant, and show that the model is chaotic. The case we analyze is the triangle described in Jules et Jim, an autobiographic novel by Henri-Pierre Roché that became famous worldwide after the success of the homonymous film directed by François Truffaut.

The nuclear industry and public hearings

International Nuclear Information System (INIS)

Mansillon, Y.

2007-01-01

Major decisions about the French nuclear industry have been made, it is often said, without sufficiently informing and consulting the population. Laws in 1995 and 2002 provide for public hearings in order to inform the public and obtain its reactions to big projects of national interest. The responsibility for organizing a hearing is vested in an independent administrative authority, the National Commission of Public Debate (CNDP). Within 2 years, 5 issues related to the nuclear industry have been referred to it: 1) the ITER project at Cadarache in april 2003, 2) the George-Besse-II project to replace the present uranium enrichment plant at Tricastin in april 2004, 3) the research reactor Jules-Horowitz project at Cadarache in july 2004, 4) the EPR project at Flamanville in november 2004, and 5) the management of radioactive wastes in february 2005. The hearings already represent a fundamental innovation compared with earlier practices

The nuclear industry and public hearings; L'industrie nucleaire et le debat public

Energy Technology Data Exchange (ETDEWEB)

Mansillon, Y. [Commission Nationale du Debat Public, 75 - Paris (France)

2007-02-15

Major decisions about the French nuclear industry have been made, it is often said, without sufficiently informing and consulting the population. Laws in 1995 and 2002 provide for public hearings in order to inform the public and obtain its reactions to big projects of national interest. The responsibility for organizing a hearing is vested in an independent administrative authority, the National Commission of Public Debate (CNDP). Within 2 years, 5 issues related to the nuclear industry have been referred to it: 1) the ITER project at Cadarache in april 2003, 2) the George-Besse-II project to replace the present uranium enrichment plant at Tricastin in april 2004, 3) the research reactor Jules-Horowitz project at Cadarache in july 2004, 4) the EPR project at Flamanville in november 2004, and 5) the management of radioactive wastes in february 2005. The hearings already represent a fundamental innovation compared with earlier practices.

Jules Verne’s Science fiction and the Physics teaching: an analysis of “Twenty Thousand Leagues Underwater”

Directory of Open Access Journals (Sweden)

Júlio César David Ferreira

2013-04-01

Full Text Available This article presents the results of a research on the literary work of Jules Verne in the context of the teaching of scientific concepts. In the book "Twenty Thousand Leagues Under the Sea", taking Bakhtin as reference for analysis, we find a systematic and deliberate teaching concepts by Verne. We note a similarity between the situations described by the author and the statements of physical phenomena typical of high school textbooks, with some differences: the richness and complexity of the Verne's narrative, with plots that make highly contextualized the scientific concepts and that expand the possibilities for the reader's understanding. Accordingly, the approach of different genres allows the emergence of interdiscourses that reading can produce, or, in the context of Physics Education, we find in the Verne's literature various points of support for the understanding of scientific knowledge in this school discourse.

La "Carta a los maestros" de Jules Ferry (1883 y el laicismo escolar de la IIIª República francesa

Directory of Open Access Journals (Sweden)

Juan Manuel FERNÁNDEZ SORIA

2010-03-01

Full Text Available RESUMEN: Partiendo del valor histórico —de lo que es una muestra su influencia en la política educativa de la Segunda República española— y de la proyección de su legado en nuestros días de la «Carta a los Maestros» (1883 del ministro francés de Instrucción Pública, Jules Ferry, este trabajo se acerca a la vida de su autor y a su política educativa para analizar luego con mayor profundidad los aspectos más sobresalientes del documento —que transcribimos en francés y castellano—, especialmente el laicismo escolar, como medio de establecer una escuela nacional y de fundación de la República, la defensa de la moral común y positiva, los modos y procedimientos —tanto directos como indirectos— de su enseñanza, así como el papel del maestro y del manual en la educación moral y cívica del futuro ciudadano. ABSTRACT: Starting with the historic value —of which it is an example its influence in the educational policy of the Second Republic— and with the influence that remains in our days, of the legate of the «Elementary Schoolteacher’s Letter», written by Jules Ferry, French minister of the Public Instruction, this piece of work approaches to its author’s life and to its educational policy in order to analyse later in greater detail the most relevant aspects of the document —which we reproduce in Spanish and French— specially the scholastic laicism as a way to establish a national school, and the foundation of the Republic, the defence of common and positive morality, the ways and procedures, both direct and indirect, of its teaching, and also the role of schoolteachers and the guide in the moral and civic education of the future citizens.

Consideration of creep in design rules of AFCEN RCC-MRx 2012 code

International Nuclear Information System (INIS)

Lebarbe, T.; Petesch, C.; Lejeail, Y.; Lamagnere, P.; Dubiez-Le Goff, S.

2014-01-01

The 2012 edition of the RCC-MRx Code has been issued in French and English versions by AFCEN (Association Francaise pour les regles de Conception et de Construction des Materiels des Chaudieres Electro-nucleaires). This Code is the result of the merger of the RCC-MX 2008 developed in the context of the research reactor Jules Horowitz Reactor project, in the RCC-MR 2007 which set up rules applicable to the design of components operating at high temperature and to the Vacuum Vessel of ITER. This new edition is the opportunity to publish also the background of the rules. This paper is one illustration of what may be such a document, on a dedicated example, the creep rules. It contains an overview of the design rules associated to the creep damage and explains the purpose and the origins of these rules. This type of exercise is going to be generalized to all the parts of the code in AFCEN technical publications, the criteria. (authors)

Localized Electron Trap Modification as a Result of Space Weather Exposure in Highly Disordered Insulating Materials

Science.gov (United States)

2017-03-06

produced by Trek Inc. Trek probe model 370 is capable of -3 to 3kV and has an extremely fast, 50µs/kV response to changing surface potentials. Trek probe...This motor can move a Trek 370 surface potential probe (± 3 kV range) and a Faraday cup mounted at opposite ends of a propeller-shaped bracket...Spacecraft Charging, in Reference Publication, 1995, NASA . 35. Horowitz, G., Organic field-effect transistors, Advanced Materials, 1998, 10(5), pp. 365

Further evaluation of wetland emission estimates from the JULES land surface model using SCIAMACHY and GOSAT atmospheric column methane measurements

Science.gov (United States)

Hayman, Garry; Comyn-Platt, Edward; McNorton, Joey; Chipperfield, Martyn; Gedney, Nicola

2016-04-01

The atmospheric concentration of methane began rising again in 2007 after a period of near-zero growth [1,2], with the largest increases observed over polar northern latitudes and the Southern Hemisphere in 2007 and in the tropics since then. The observed inter-annual variability in atmospheric methane concentrations and the associated changes in growth rates have variously been attributed to changes in different methane sources and sinks [2,3]. Wetlands are generally accepted as being the largest, but least well quantified, single natural source of CH4, with global emission estimates ranging from 142-284 Tg yr-1 [3]. The modelling of wetlands and their associated emissions of CH4 has become the subject of much current interest [4]. We have previously used the HadGEM2 chemistry-climate model to evaluate the wetland emission estimates derived using the UK community land surface model (JULES, the Joint UK Land Earth Simulator) against atmospheric observations of methane, including SCIAMACHY total methane columns [5] up to 2007. We have undertaken a series of new HadGEM2 runs using new JULES emission estimates extended in time to the end of 2012, thereby allowing comparison with both SCIAMACHY and GOSAT atmospheric column methane measurements. We will describe the results of these runs and the implications for methane wetland emissions. References [1] Rigby, M., et al.: Renewed growth of atmospheric methane. Geophys. Res. Lett., 35, L22805, 2008; [2] Nisbet, E.G., et al.: Methane on the Rise-Again, Science 343, 493, 2014; [3] Kirschke, S., et al.,: Three decades of global methane sources and sinks, Nature Geosciences, 6, 813-823, 2013; [4] Melton, J. R., et al.: Present state of global wetland extent and wetland methane modelling: conclusions from a model inter-comparison project (WETCHIMP), Biogeosciences, 10, 753-788, 2013; [5] Hayman, G.D., et al.: Comparison of the HadGEM2 climate-chemistry model against in situ and SCIAMACHY atmospheric methane data, Atmos. Chem

Development and experimental qualification of a calculation scheme for the evaluation of gamma heating in experimental reactors. Application to MARIA and Jules Horowitz (JHR) MTR Reactors

Energy Technology Data Exchange (ETDEWEB)

Tarchalski, M.; Pytel, K.; Wroblewska, M.; Marcinkowska, Z.; Boettcher, A.; Prokopowicz, R. [NCBJ Institute, MARIA Reactor, ul.Andrzeja Soltana 7, 05-400 Swierk (Poland); Sireta, P.; Gonnier, C.; Bignan, G. [CEA, DEN, Reactor Studies Department, Cadarache, F-13108 St-Paul-Lez-Durance (France); Lyoussi, A.; Fourmentel, D.; Barbot, L.; Villard, J.F.; Destouches, C. [CEA, DEN, DER, Instrumentation Sensors and Dosimetry Laboratory, Cadarache, F-13108 St-Paul-Lez-Durance (France); Reynard-Carette, C.; Brun, J. [Aix Marseille Universite, CNRS, Universite de Toulon, IM2NP UMR 7334, 13397, Marseille (France); Jagielski, J. [NCBJ Institute, MARIA Reactor, ul.Andrzeja Soltana 7, 05-400 Swierk (Poland); Institute of Electronic Materials Technolgy, Wolczynska 133, 01-919 Warszawa (Poland); Luks, A. [Institute of Heat Engineering, Nowowiejska 21/25, 00-665 Warsaw (Poland)

2015-07-01

Precise computational determination of nuclear heating which consists predominantly of gamma heating (more than 80 %) is one of the challenges in material testing reactor exploitation. Due to sophisticated construction and conditions of experimental programs planned in JHR it became essential to use most accurate and precise gamma heating model. Before the JHR starts to operate, gamma heating evaluation methods need to be developed and qualified in other experimental reactor facilities. This is done inter alia using OSIRIS, MINERVE or EOLE research reactors in France. Furthermore, MARIA - Polish material testing reactor - has been chosen to contribute to the qualification of gamma heating calculation schemes/tools. This reactor has some characteristics close to those of JHR (beryllium usage, fuel element geometry). To evaluate gamma heating in JHR and MARIA reactors, both simulation tools and experimental program have been developed and performed. For gamma heating simulation, new calculation scheme and gamma heating model of MARIA have been carried out using TRIPOLI4 and APOLLO2 codes. Calculation outcome has been verified by comparison to experimental measurements in MARIA reactor. To have more precise calculation results, model of MARIA in TRIPOLI4 has been made using the whole geometry of the core. This has been done for the first time in the history of MARIA reactor and was complex due to cut cone shape of all its elements. Material composition of burnt fuel elements has been implemented from APOLLO2 calculations. An experiment for nuclear heating measurements and calculation verification has been done in September 2014. This involved neutron, photon and nuclear heating measurements at selected locations in MARIA reactor using in particular Rh SPND, Ag SPND, Ionization Chamber (all three from CEA), KAROLINA calorimeter (NCBJ) and Gamma Thermometer (CEA/SCK CEN). Measurements were done in forty points using four channels. Maximal nuclear heating evaluated from

Comparison of Thermal Neutron Flux Measured by Uranium 235 Fission Chamber and Rhodium Self-Powered Neutron Detector in MTR

International Nuclear Information System (INIS)

Fourmentel, D.; Filliatre, P.; Barbot, L.; Villard, J.-F.; Lyoussi, A.; Geslot, B.; Malo, J.-Y.; Carcreff, H.; Reynard-Carette, C.

2013-06-01

Thermal neutron flux is one of the most important nuclear parameter to be measured on-line in Material Testing Reactors (MTRs). In particular two types of sensors with different physical operating principles are commonly used: self-powered neutron detectors (SPND) and fission chambers with uranium 235 coating. This work aims to compare on one hand the thermal neutron flux evaluation given by these two types of sensors and on the other hand to compare these evaluations with activation dosimeter measurements, which are considered as the reference for absolute neutron flux assessment. This study was conducted in an irradiation experiment, called CARMEN-1, performed during 2012 in OSIRIS reactor (CEA Saclay - France). The CARMEN-1 experiment aims to improve the neutron and photon flux and nuclear heating measurements in MTRs. In this paper we focus on the thermal neutron flux measurements performed in CARMEN-1 experiment. The use of fission chambers to measure the absolute thermal neutron flux in MTRs is not very usual. An innovative calibration method for fission chambers operated in Campbell mode has been developed at the CEA Cadarache (France) and tested for the first time in the CARMEN-1 experiment. The results of these measurements are discussed, with the objective to measure with the best accuracy the thermal neutron flux in the future Jules Horowitz Reactor. (authors)

The ASN and nuclear facilities: towards a strengthening of safety margins

International Nuclear Information System (INIS)

Anon.

2012-01-01

The new measures taken by the French Nuclear Safety Authority (ASN) as a consequence of the complementary safety assessments performed recently on nuclear facilities are reviewed in this article. The main measures are the following. Concerning EDF: -) the setting of a hard core of measures in order to assure a few safety-vital functions in any case, for instance one of this measures is to bunker some of the emergency diesel sets; -) the setting of a rapid intervention force able to provide any damaged nuclear plant with extra means in cooling and power in a very short time; -) a better training of the staff in case of severe accident. Concerning AREVA: the setting of robust means to assure the water supply of the fuel pool at La Hague plant and the setting of efficient means to mitigate the consequences of a leak of ClF 3 , HF, UF 6 in the premises of Eurodif, Socatri, TU5, GB 2 and Comurhex. Concerning CEA: -) the removal of fissile materials from the Masurca facility, -) the setting up of improved means concerning flood and sodium fires at the Phenix reactor, -) the setting up of improved means concerning the loss of coolant at the Osiris reactor, -) the setting up of improved means in case of flood, earthquake and loss of coolant at the Jules Horowitz reactor. (A.C.)

Pre-design of MYRRHA, A Multipurpose Accelerator Driven System for Research and Development

International Nuclear Information System (INIS)

D'hondt, P.; Abderrahim, H. Aiet; Kupschus, P.; Malambu, E.; Aoust, Th.; Benoit, Ph.; Sobolev, V.; Tichelen, K. van; Arien, B.; Vermeersch, F.; Jongen, Y.; Ternier, S.; Vandeplassche, D.

2003-01-01

One of the main SCKCEN research facility, namely BR2, is nowadays arriving at an age of 40 years just like the major materials testing reactors (MTR) in the world and in Europe (i.e. BR2 (B-Mol), HFR (EU-Petten), OSIRIS (F-Saclay), R2 (S-Studsvik)). The MYRRHA facility in planning has been conceived as potentially replacing BR2 and to be a fast spectrum facility complementary to the thermal spectrum RJH (Reacteur Jules Horowitz) facility, in planning in France. This situation would give Europe a full research capability in terms of nuclear R and D. Furthermore, the disposal of radioactive wastes resulting from industrial nuclear energy production has still to find a fully satisfactory solution, especially in terms of environmental and social acceptability. Scientists are looking for ways to drastically reduce (by a factor of 100 or more) the radio-toxicity of the High Level Waste (HLW) to be stored in a deep geological repository. This can be achieved via burning of minor actinides (MA) and to a less extent of long-lived fission products (LLFP) in Accelerator Driven Systems. The MYRRHA project contribution will be in helping to demonstrate the ADS concept at reasonable power level and the demonstration of the technological feasibility of MA and LLFP transmutation under real conditions

Radiation shielding activities at IDOM

Energy Technology Data Exchange (ETDEWEB)

Ordóñez, César Hueso; Gurpegui, Unai Cano; Valiente, Yelko Chento; Poveda, Imanol Zamora, E-mail: cesar.hueso@idom.com [IDOM, Consulting, Engineering and Architecture, S.A.U, Vizcaya (Spain)

2017-07-01

When human activities have to be performed under ionising radiation environments the safety of the workers must be guaranteed. Usually three principles are used to accomplish with ALARA (As Low As Reasonably Achievable) requirements: the more distance between the source term and the worker, the better; the less time spent to arrange any task, the better; and, once the previous principles are optimized should the exposure of the workers continues being above the regulatory limits, shielding has to be implemented. Through this paper some different examples of IDOM's shielding design activities are presented. Beginning with the gamma collimators for the Jules Horowitz Reactor, nuclear fuel's behaviour researching facility, where the beam path crosses the reactor's containment walls and is steered up to a gamma detector where the fuel spectrum is analysed and where the beam has to be attenuated several orders of magnitude in a short distance. Later it is shown IDOM’s approach for the shielding of the Emergency Control Management Center of Asociación Nuclear Ascó-Vandellòs-II NPPs, a bunker designed to withstand severe accident conditions and to support the involved staff during 30 days, considering the outside radioactive cloud and the inside source term that filtering units become as they filter the incoming air. And finally, a general approach to this kind of problems is presented, since the study of the source term considering all the possible contributions, passing through the material selection and the thicknesses calculation until the optimization of the materials. (author)

Radiation shielding activities at IDOM

International Nuclear Information System (INIS)

Ordóñez, César Hueso; Gurpegui, Unai Cano; Valiente, Yelko Chento; Poveda, Imanol Zamora

2017-01-01

When human activities have to be performed under ionising radiation environments the safety of the workers must be guaranteed. Usually three principles are used to accomplish with ALARA (As Low As Reasonably Achievable) requirements: the more distance between the source term and the worker, the better; the less time spent to arrange any task, the better; and, once the previous principles are optimized should the exposure of the workers continues being above the regulatory limits, shielding has to be implemented. Through this paper some different examples of IDOM's shielding design activities are presented. Beginning with the gamma collimators for the Jules Horowitz Reactor, nuclear fuel's behaviour researching facility, where the beam path crosses the reactor's containment walls and is steered up to a gamma detector where the fuel spectrum is analysed and where the beam has to be attenuated several orders of magnitude in a short distance. Later it is shown IDOM’s approach for the shielding of the Emergency Control Management Center of Asociación Nuclear Ascó-Vandellòs-II NPPs, a bunker designed to withstand severe accident conditions and to support the involved staff during 30 days, considering the outside radioactive cloud and the inside source term that filtering units become as they filter the incoming air. And finally, a general approach to this kind of problems is presented, since the study of the source term considering all the possible contributions, passing through the material selection and the thicknesses calculation until the optimization of the materials. (author)

Modelling of thermal hydraulics in a KAROLINA calorimeter for its calibration methodology validation

Directory of Open Access Journals (Sweden)

Luks Aleksandra

2016-12-01

Full Text Available Results of numerical calculations of heat exchange in a nuclear heating detector for nuclear reactors are presented in this paper. The gamma radiation is generated in nuclear reactor during fission and radiative capture reactions as well as radioactive decay of its products. A single-cell calorimeter has been designed for application in the MARIA research reactor in the National Centre for Nuclear Research (NCBJ in Świerk near Warsaw, Poland, and can also be used in the Jules Horowitz Reactor (JHR, which is under construction in the research centre in Cadarache, France. It consists of a cylindrical sample, which is surrounded by a gas layer, contained in a cylindrical housing. Additional calculations had to be performed before its insertion into the reactor. Within this analysis, modern computational fluid dynamics (CFD methods have been used for assessing important parameters, for example, mean surface temperature, mean volume temperature, and maximum sample (calorimeter core temperature. Results of an experiment performed at a dedicated out-of-pile calibration bench and results of numerical modelling validation are also included in this paper.

GASN sheets

International Nuclear Information System (INIS)

2013-12-01

This document gathers around 50 detailed sheets which describe and present various aspects, data and information related to the nuclear sector or, more generally to energy. The following items are addressed: natural and artificial radioactive environment, evolution of energy needs in the world, radioactive wastes, which energy for France tomorrow, the consequences in France of the Chernobyl accident, ammunitions containing depleted uranium, processing and recycling of used nuclear fuel, transport of radioactive materials, seismic risk for the basic nuclear installations, radon, the precautionary principle, the issue of low doses, the EPR, the greenhouse effect, the Oklo nuclear reactors, ITER on the way towards fusion reactors, simulation and nuclear deterrence, crisis management in the nuclear field, does nuclear research put a break on the development of renewable energies by monopolizing funding, nuclear safety and security, the plutonium, generation IV reactors, comparison of different modes of electricity production, medical exposure to ionizing radiations, the control of nuclear activities, food preservation by ionization, photovoltaic solar collectors, the Polonium 210, the dismantling of nuclear installations, wind energy, desalination and nuclear reactors, from non-communication to transparency about nuclear safety, the Jules Horowitz reactor, CO 2 capture and storage, hydrogen, solar energy, the radium, the subcontractors of maintenance of the nuclear fleet, biomass, internal radio-contamination, epidemiological studies, submarine nuclear propulsion, sea energy, the Three Mile Island accident, the Chernobyl accident, the Fukushima accident, the nuclear after Fukushima

Insetos em presépios e as "formigas vestidas" de Jules Martin (1832-1906: uma curiosa manufatura paulistana do final do século XIX

Directory of Open Access Journals (Sweden)

Dante Martins Teixeira

2008-01-01

Full Text Available Present in Brazil since the beginning of Portuguese colonization, crèche nativity scenes were soon adapted to local reality, a propitious circumstance for the appearance of heterodox conceptions and the use of exotic elements of the fauna and flora peculiar to each region. As records about insects are very uncommon, it is noteworthy that females of leaf-cutting ants, Atta sp. (Hymenoptera, Formicidae, were used to compose crèche nativity scenes in São Paulo State. Having subsisted at least up to the decade of 1960, the "ant crèches" of cities such as Embu das Artes could be related to the then famous "dressed ants" created by Jules Martin, a curious manufacture of the city of São Paulo in the last quarter of the 19th century.

Development of Forest Drought Index and Forest Water Use Prediction in Gyeonggi Province, Korea Using High-Resolution Weather Research and Forecast Data and Localized JULES Land Surface Model

Science.gov (United States)

Lee, H.; Park, J.; Cho, S.; Lee, S. J.; Kim, H. S.

2017-12-01

Forest determines the amount of water available to low land ecosystems, which use the rest of water after evapotranspiration by forests. Substantial increase of drought, especially for seasonal drought, has occurred in Korea due to climate change, recently. To cope with this increasing crisis, it is necessary to predict the water use of forest. In our study, forest water use in the Gyeonggi Province in Korea was estimated using high-resolution (spatial and temporal) meteorological forecast data and localized Joint UK Land Environment Simulator (JULES) which is one of the widely used land surface models. The modeled estimation was used for developing forest drought index. The localization of the model was conducted by 1) refining the existing two tree plant functional types (coniferous and deciduous trees) into five (Quercus spp., other deciduous tree spp., Pinus spp., Larix spp., and other coniferous spp.), 2) correcting moderate resolution imaging spectroradiometer (MODIS) leaf area index (LAI) through data assimilation with in situ measured LAI, and 3) optimizing the unmeasured plant physiological parameters (e.g. leaf nitrogen contents, nitrogen distribution within canopy, light use efficiency) based on sensitivity analysis of model output values. The high-resolution (hourly and 810 × 810 m) National Center for AgroMeteorology-Land-Atmosphere Modeling Package (NCAM-LAMP) data were employed as meteorological input data in JULES. The plant functional types and soil texture of each grid cell in the same resolution with that of NCAM-LAMP was also used. The performance of the localized model in estimating forest water use was verified by comparison with the multi-year sapflow measurements and Eddy covariance data of Taehwa Mountain site. Our result can be used as referential information to estimate the forest water use change by the climate change. Moreover, the drought index can be used to foresee the drought condition and prepare to it.

Simplified P{sub n} transport core calculations in the Apollo3 system

Energy Technology Data Exchange (ETDEWEB)

Baudron, Anne-Marie; Lautard, Jean-Jacques, E-mail: anne-marie.baudron@cea.fr, E-mail: jean-jacques.lautard@cea.fr [Commissariat a l' Energie Atomique et aux Energies Alternatives, CEA Saclay, Gif-sur-Yvette (France)

2011-07-01

This paper describes the development of two different neutronics core solvers based on the Simplified P{sub N} transport (SP{sub N}) approximation developed in the context of a new generation nuclear reactor computational system, APOLLO3. Two different approaches have been used. The first one solves the standard SPN system. In the second approach, the SP{sub N} equations are solved as diffusion equations by treating the SP{sub N} flux harmonics like pseudo energy groups, obtained by a change of variable. These two methods have been implemented for Cartesian and hexagonal geometries in the kinetics solver MINOS. The numerical approximation is based on the mixed dual finite formulation and the discretization uses the Raviart-Thomas-Nedelec finite elements. For the unstructured geometries, the SP{sub N} equations are treated by the SN transport solver MINARET by considering the second SP{sub N} approach. The MINARET solver is based on discontinuous Galerkin finite element approximation on cylindrical unstructured meshes composed of a set of conforming triangles for the radial direction. Numerical applications are presented for both solvers in different core configurations (the Jules Horowitz research reactor (JHR) and the Generation IV fast reactor project ESFR). (author)

Analysis and discussion on reports of additional safety assessment of nuclear installations with respect to the Fukushima accident

International Nuclear Information System (INIS)

Sene, Monique; Sene, Raymond

2011-11-01

This document proposes an analysis of the reports made by the different operators of nuclear installations within the frame of a safety audit of the French nuclear installations with respect to the Fukushima accident. Operators (mainly AREVA, the CEA and EDF) were asked to perform additional safety assessments. In a first part, the conclusions of EDF reports are analysed regarding the seismic risk, the flooding risk, the situation of some specific sites (Fessenheim, Tricastin), other phenomena (rains, winds), loss of electricity supplies and of cooling systems, severe accidents, hydrogen issue, chemical hazards, subcontractors, crisis management. Conclusions of AREVA reports are analysed for the different sites (Tricastin, La Hague, MELOX factory, Romans factory). Conclusions of CEA reports are analysed for the different concerned installations (ATPu, Masurca, Osiris, Phenix, Jules Horowitz reactor). A second part proposes a global analysis of EDF's additional safety assessment reports regarding earthquake, flooding, other extreme natural phenomena, loss of electricity supplies and cooling system, subcontracting conditions, crisis management, and radiation protection organisation. AREVA's and CEA's reports are then analysed in terms of report structure and content, and for the different concerned sites

Simplified P_n transport core calculations in the Apollo3 system

International Nuclear Information System (INIS)

Baudron, Anne-Marie; Lautard, Jean-Jacques

2011-01-01

This paper describes the development of two different neutronics core solvers based on the Simplified P_N transport (SP_N) approximation developed in the context of a new generation nuclear reactor computational system, APOLLO3. Two different approaches have been used. The first one solves the standard SPN system. In the second approach, the SP_N equations are solved as diffusion equations by treating the SP_N flux harmonics like pseudo energy groups, obtained by a change of variable. These two methods have been implemented for Cartesian and hexagonal geometries in the kinetics solver MINOS. The numerical approximation is based on the mixed dual finite formulation and the discretization uses the Raviart-Thomas-Nedelec finite elements. For the unstructured geometries, the SP_N equations are treated by the SN transport solver MINARET by considering the second SP_N approach. The MINARET solver is based on discontinuous Galerkin finite element approximation on cylindrical unstructured meshes composed of a set of conforming triangles for the radial direction. Numerical applications are presented for both solvers in different core configurations (the Jules Horowitz research reactor (JHR) and the Generation IV fast reactor project ESFR). (author)

Analysis of the AMMON experimental program in the EOLE facility supporting the qualification of the JHR neutron and photon tools

International Nuclear Information System (INIS)

Vaglio-Gaudard, C.; Colombier, A.C.; Hudelot, J.P.; Leray, O.; Lemaire, M.; Di-Salvo, J.; Gruel, A.; Sireta, P.

2013-06-01

The first divergence of the international Jules Horowitz Material Testing Reactor under construction at CEA Cadarache is foreseen in 2016. In order to perform all the design and safety studies, a specific neutron and photon calculation tool, HORUS3D/N and P, dedicated to the JHR simulation, was developed. This development follows the V and V-UQ process; in this frame, the validation and qualification steps aim at quantifying all the biases and associated uncertainties of HORUS3D/N and P calculations. These biases originate from both the nuclear data and the calculation scheme, for calculations at step zero (JHR BOL core) or during depletion (JHR core at equilibrium). This paper focusses on the quantification of the biases due to nuclear data and the associated uncertainties. A new experimental program, named AMMON, was performed between 2010 and 2013 to provide experimental data for this quantification. A large part of the measurements has been today analyzed with the Monte Carlo TRIPOLI-4 R code and the JEFF3.1.1 and EPDL97 data libraries relative to neutron/photon transport and photon emission. The C/E results were transposed from AMMON to JHR. The synthesis of the present analysis is very satisfactory. The calculation biases remains limited. In addition, thanks to a very good control to the experimental uncertainties during measurements, it is shown that the a priori uncertainties due to nuclear data for parameters at step zero was reduced up to a factor of 2. (authors)

RCC-MRx: Design and construction rules for mechanical components in high-temperature structures, experimental reactors and fusion reactors

International Nuclear Information System (INIS)

2015-01-01

The RCC-MRx code was developed for sodium-cooled fast reactors (SFR), research reactors (RR) and fusion reactors (FR-ITER). It provides the rules for designing and building mechanical components involved in areas subject to significant creep and/or significant irradiation. In particular, it incorporates an extensive range of materials (aluminum and zirconium alloys in response to the need for transparency to neutrons), sizing rules for thin shells and box structures, and new modern welding processes: electron beam, laser beam, diffusion and brazing. The RCC-MR code was used to design and build the prototype Fast Breeder Reactor (PFBR) developed by IGCAR in India and the ITER Vacuum Vessel. The RCC-Mx code is being used in the current construction of the RJH experimental reactor (Jules Horowitz reactor). The RCC-MRx code is serving as a reference for the design of the ASTRID project (Advanced Sodium Technological Reactor for Industrial Demonstration), for the design of the primary circuit in MYRRHA (Multi-purpose hybrid Research Reactor for High-tech Applications) and the design of the target station of the ESS project (European Spallation Source). Contents of the 2015 edition of the RCC-MRx code: Section I General provisions; Section II Additional requirements and special provisions; Section III Rules for nuclear installation mechanical components: Volume I: Design and construction rules: Volume A (RA): General provisions and entrance keys, Volume B (RB): Class 1 components and supports, Volume C (RC): Class 2 components and supports, Volume D (RD): Class 3 components and supports, Volume K (RK): Examination, handling or drive mechanisms, Volume L (RL): Irradiation devices, Volume Z (Ai): Technical appendices; Volume II: Materials; Volume III: Examinations methods; Volume IV: Welding; Volume V: Manufacturing operations; Volume VI: Probationary phase rules

French experience in design, operation and revamping of nuclear research reactors, in support of advanced reactors development

International Nuclear Information System (INIS)

Barre, B.; Bergeonneau, P.; Merchie, F.; Minguet, J.L.; Rousselle, P.

1996-01-01

The French nuclear program is strongly based on the R and D work performed in the CEA nuclear research centers and particularly on the various experimental programs carried out in its research reactors in the frame of cooperative actions between the Commissariat a l'Energie Atomique (CEA), Framatome and Electricite de France (EDF). Several types of research reactors have been built by Technicatome and CEA to carry out successfully this considerable R and D work on fuels and materials, among them the socalled Materials Testing Reactors (MTR) SILOE (35 MW) and OSIRIS (70 MW) which are indeed very well suited for technological irradiations. Their simple and flexible design and the large irradiation space available around the core, the SILOE and OSIRIS reactors can be shared by several types of applications such as fuel and material testings for nuclear power plants, radioisotopes production, silicon doping and fundamental research. It is worthwhile recalling that Technicatome and CEA have also built research reactors fully dedicated to safety experimental studies, such as the CABRI, SCARABEE and PHEBUS reactors at Cadarache, and others dedicated to fundamental research such as ORPHEE (14 MW) and the Reacteur a Haut Flux -High Flux Reactor- (RHF 57 MW). This paper will present some of the most significant conceptual and design features of all these reactors as well as the main improvements brought to most of them in the last years. Based on this wide experience, CEA and Technicatome have specially designed for export a new multipurpose research reactor named SIRIUS, with two versions depending on the utilization spectrum and the power range (5 MW to 30 MW). At last, CEA has recently launched the preliminary project study of a new MTR, the Jules Horowitz Reactor, to meet the future needs of fuels and materials irradiations in the next 4 or 5 decades, in support of the French long term nuclear power program. (J.P.N.)

Conversations avec Jules Hoüel regards sur la géométrie non euclidienne et l’analyse infinitésimale vers 1875

CERN Document Server

Nabonnand, Philippe

2017-01-01

Jules Hoüel (1823-1886) a occupé une place particulière dans les mathématiques en France durant la seconde partie du 19ème siècle. Par ses travaux de traduction et ses recensions, il a vivement contribué à la réception de la géométrie non euclidienne de Bolyai et Lobatchevski ainsi qu’aux débats sur les fondements de l’analyse. Il se situe au centre d’un vaste réseau international de correspondances en lien avec son rôle de rédacteur pour le Bulletin des sciences mathématiques et astronomiques. Cet ouvrage contient les correspondances actives et passives de Hoüel avec Joseph-Marie De Tilly, Gaston Darboux et Victor-Amédée Le Besgue ainsi qu’une introduction qui se focalise sur la découverte de l’impossibilité de démontrer le postulat des parallèles d’Euclide et l’apparition des premiers exemples de fonctions continues non dérivables.

Origin and development of the new U-Mo nuclear fuel

International Nuclear Information System (INIS)

Boyard, M.; Languille, A.; Thomasson, J.; Hamy, J.M.

2002-01-01

Historically most research reactors have used highly enriched nuclear fuels (enrichment > 90 %). Since 1977 the non-proliferation policy has imposed to convert these reactors to far less enriched fuels (< 20 %). An international consensus has evolved towards a nuclear fuel with an enrichment factor of 19,75 %, this fuel is made of a powdered U-Mo alloy scattered in an aluminium die. The external dimensions and the cladding materials of the fuel plate are unchanged in order to minimize development and qualification costs. The U-Mo fuel is expected to maintain or even to increase the performance of reactors and to allow the processing of spent fuels in the same installations as those used for fuels issuing from power plants. Cea, Cogema, Cerca, Framatome, and Technicatome have shared their technical means, their know-how and their financial resources to develop this new nuclear fuel. 2006 is the contract date by which American authorities will stop repatriating the ancient spent fuel (uranium silicide) from research reactors so it is imperative to make available by this date a new nuclear fuel with a satisfactory end of cycle. This article also presents the French program of qualification of the U-Mo fuel. 2 series of irradiation have already been performed, one (Isis-1) in Osiris reactor (Saclay, France) and the second (Umus) in HFR (Petten, Netherlands). A clad failure has led to stop the Umus experiment. 2 new series of irradiation are scheduled to start in 2002. In a parallel way, in the framework of the design of the RJH (Jules Horowitz reactor) Cea will soon perform irradiation of U-Mo fuel plates in BR2 (Mol, Belgium). (A.C.)

Evolution of mechanical behavior of 6XXX aluminium alloy due to the precipitation state during a thermo-mechanical process

International Nuclear Information System (INIS)

Bardel, Didier; Perez, Michel; Nelias, Daniel; Chaise, Thibaut; Garnier, Jerome; Bourlier, Florent

2014-01-01

The aim of this research is to link the microstructural state and the mechanical properties of an age hardening alloy during a fast heat treatment such as encountered during welding. A coupled model between precipitation state and mechanical properties is used to predict the yield strength and hardening behavior that can be observed experimentally. The method permits the identification of the kinematic and isotropic contributions in the hardening model. The methodology is applied to a 6061-T6 aluminium alloy which is used in the Jules Horowitz reactor vessel. The general idea of this methodology is to couple an efficient microstructural model to a mechanical one based on the dislocation theory and ad'hoc experiments. The theoretical background is based on the work of Kampmann and Wagner, known as the KWN model, to account for nucleation, growth/dissolution and coarsening of precipitates. This analysis requires transient thermo-mechanical experimental data. The efficiency of these models and their coupling are shown for a series 6XXX aluminium alloy which contains β'' and β' precipitates. Ultimately these models are coupled to a FEA model and allows to predict the distribution of precipitates within each element of the mesh, and subsequently its mechanical behavior. (authors)

Third session: new projects

International Nuclear Information System (INIS)

Iracane, D.; Dupuy, J.P.; Perotto, G.; Ithurralde, G.; Cabrillat, J.C.; Becle, D.; Pivet, S.; Minguet, J.L.

2005-01-01

The RJH (Jules Horowitz reactor) is a 100 MWth research reactor, cooled and moderated by water, that has been designed to operate with high density (8 g U/cm 3 ) and low enrichment fuel (19.75%) uranium molybdenum fuel. Its main neutron performances are expected to be: -) maximum fast neutron flux (E > 0.907 MeV) in the sample: 5.10 14 n/cm 2 /s, -) maximum thermal neutron flux (E 14 n/cm 2 /s, and -) maximal neutron damage: 16 dpa/year. RJH that will be built on the Cea's site of Cadarache, is scheduled to enter into service in 2014, it will take over the activities of the Osiris reactor and its operating life is planned to be over 50 years long. The Cabri research reactor is located on the Cadarache site, it has been operating since 1962 and is now undergoing important upgrading operations whose aim is to make the facility fit to study the behaviour of new nuclear fuels in accidental situations. The RES test reactor is a facility whose aim is to qualify nuclear fuels and core configurations of existing propulsion reactors onboard of aircraft carriers or submarines and to propose innovative concepts for future propulsion reactors. (A.C.)

Performance assessment of imaging plates for the JHR transfer Neutron Imaging System

Science.gov (United States)

Simon, E.; Guimbal, P. AB(; )

2018-01-01

The underwater Neutron Imaging System to be installed in the Jules Horowitz Reactor (JHR-NIS) is based on a transfer method using a neutron activated beta-emitter like Dysprosium. The information stored in the converter is to be offline transferred on a specific imaging system, still to be defined. Solutions are currently under investigation for the JHR-NIS in order to anticipate the disappearance of radiographic films commonly used in these applications. We report here the performance assessment of Computed Radiography imagers (Imaging Plates) performed at LLB/Orphée (CEA Saclay). Several imaging plate types are studied, in one hand in the configuration involving an intimate contact with an activated dysprosium foil converter: Fuji BAS-TR, Fuji UR-1 and Carestream Flex XL Blue imaging plates, and in the other hand by using a prototypal imaging plate doped with dysprosium and thus not needing any contact with a separate converter foil. The results for these imaging plates are compared with those obtained with gadolinium doped imaging plate used in direct neutron imaging (Fuji BAS-ND). The detection performances of the different imagers are compared regarding resolution and noise. The many advantages of using imaging plates over radiographic films (high sensitivity, linear response, high dynamic range) could palliate its lower intrinsic resolution.

News from the world

International Nuclear Information System (INIS)

Anon.

2005-01-01

This document gathers a series of very short articles concerning nuclear industry around the world. Areva company is investing 30 million euros in its Chalon-Saint-Marcel plant, it is the consequence of the extension of service life of nuclear power plants in the Usa. Areva holds 40% of the American market concerning the replacement of steam generators and 50% of that concerning the replacement of closure heads. The Obrigheim nuclear power plant was definitely closed down on may 2004, this decommissioning is a step forward in the German policy of progressively stepping out of nuclear energy. Chinese authorities are willing to construct 40 nuclear reactors in 15 years, despite that, the contribution of nuclear energy to the generation of electricity will reach only 4% in 2020. In 2007 Cea will begin the construction works of a new research reactor (Jules Horowitz reactor) in the Cadarache site. Prices of the yellow cake have been going up during the last years: from 9 dollar the pound in 2001 to 23 dollar today. Nuclear fuel manufacturers do not worry because far higher prices have been previously reached (70 dollars in the seventies) and uranium reserves are expected to assure 200 years of electricity generation at the same level of production as today. (A.C.)

Methodology comparison for gamma-heating calculations in material-testing reactors

Energy Technology Data Exchange (ETDEWEB)

Lemaire, M.; Vaglio-Gaudard, C.; Lyoussi, A. [CEA, DEN, DER, Cadarache F-13108 Saint Paul les Durance (France); Reynard-Carette, C. [Aix Marseille Universite, CNRS, Universite de Toulon, IM2NP UMR 7334, 13397, Marseille (France)

2015-07-01

The Jules Horowitz Reactor (JHR) is a Material-Testing Reactor (MTR) under construction in the south of France at CEA Cadarache (French Alternative Energies and Atomic Energy Commission). It will typically host about 20 simultaneous irradiation experiments in the core and in the beryllium reflector. These experiments will help us better understand the complex phenomena occurring during the accelerated ageing of materials and the irradiation of nuclear fuels. Gamma heating, i.e. photon energy deposition, is mainly responsible for temperature rise in non-fuelled zones of nuclear reactors, including JHR internal structures and irradiation devices. As temperature is a key parameter for physical models describing the behavior of material, accurate control of temperature, and hence gamma heating, is required in irradiation devices and samples in order to perform an advanced suitable analysis of future experimental results. From a broader point of view, JHR global attractiveness as a MTR depends on its ability to monitor experimental parameters with high accuracy, including gamma heating. Strict control of temperature levels is also necessary in terms of safety. As JHR structures are warmed up by gamma heating, they must be appropriately cooled down to prevent creep deformation or melting. Cooling-power sizing is based on calculated levels of gamma heating in the JHR. Due to these safety concerns, accurate calculation of gamma heating with well-controlled bias and associated uncertainty as low as possible is all the more important. There are two main kinds of calculation bias: bias coming from nuclear data on the one hand and bias coming from physical approximations assumed by computer codes and by general calculation route on the other hand. The former must be determined by comparison between calculation and experimental data; the latter by calculation comparisons between codes and between methodologies. In this presentation, we focus on this latter kind of bias. Nuclear

Innovations for In-Pile Measurements in the Framework of the CEA-SCK•CEN Joint Instrumentation Laboratory

Science.gov (United States)

Villard, Jean-Francois; Schyns, Marc

2010-12-01

Optimizing the life cycle of nuclear systems under safety constraints requires high-performance experimental programs to reduce uncertainties on margins and limits. In addition to improvement in modeling and simulation, innovation in instrumentation is crucial for analytical and integral experiments conducted in research reactors. The quality of nuclear research programs relies obviously on an excellent knowledge of their experimental environment which constantly calls for better online determination of neutron and gamma flux. But the combination of continuously increasing scientific requirements and new experimental domains -brought for example by Generation IV programsnecessitates also major innovations for in-pile measurements of temperature, dimensions, pressure or chemical analysis in innovative mediums. At the same time, the recent arising of a European platform around the building of the Jules Horowitz Reactor offers new opportunities for research institutes and organizations to pool their resources in order to face these technical challenges. In this situation, CEA (French Nuclear Energy Commission) and SCK'CEN (Belgian Nuclear Research Centre) have combined their efforts and now share common developments through a Joint Instrumentation Laboratory. Significant progresses have thus been obtained recently in the field of in-pile measurements, on one hand by improvement of existing measurement methods, and on the other hand by introduction in research reactors of original measurement techniques. This paper highlights the state-of-the-art and the main requirements regarding in-pile measurements, particularly for the needs of current and future irradiation programs performed in material testing reactors. Some of the main on-going developments performed in the framework of the Joint Instrumentation Laboratory are also described, such as: - a unique fast neutron flux measurement system using fission chambers with 242Pu deposit and a specific online data processing

Improving the Fit of a Land-Surface Model to Data Using its Adjoint

Science.gov (United States)

Raoult, N.; Jupp, T. E.; Cox, P. M.; Luke, C.

2015-12-01

Land-surface models (LSMs) are of growing importance in the world of climate prediction. They are crucial components of larger Earth system models that are aimed at understanding the effects of land surface processes on the global carbon cycle. The Joint UK Land Environment Simulator (JULES) is the land-surface model used by the UK Met Office. It has been automatically differentiated using commercial software from FastOpt, resulting in an analytical gradient, or 'adjoint', of the model. Using this adjoint, the adJULES parameter estimation system has been developed, to search for locally optimum parameter sets by calibrating against observations. adJULES presents an opportunity to confront JULES with many different observations, and make improvements to the model parameterisation. In the newest version of adJULES, multiple sites can be used in the calibration, to giving a generic set of parameters that can be generalised over plant functional types. We present an introduction to the adJULES system and its applications to data from a variety of flux tower sites. We show that calculation of the 2nd derivative of JULES allows us to produce posterior probability density functions of the parameters and how knowledge of parameter values is constrained by observations.

Third session: new projects; Session 3: Les Projets nouveaux

Energy Technology Data Exchange (ETDEWEB)

Iracane, D. [CEA Saclay, Dir. de l' Energie Nucleaire (DEN), 91 - Gif sur Yvette (France); Dupuy, J.P. [AREVA-Technicatome, 13 - Aix en Provence (France); Perotto, G. [AREVA-Framatome-ANP, 13 - Aix en Provence (France); Ithurralde, G. [Electricite de France (EDF), 13 - Aix en Provence (France); Cabrillat, J.C. [CEA Cadarache, Dir. de l' Energie Nucleaire (DEN), 13 - Saint-Paul-lez-Durance (France); Becle, D. [FRAMATOME, AREVA-FANP, 69 - Lyon (France); Pivet, S. [CEA Bruyeres-le-Chatel, 91 (France); Minguet, J.L. [AREVA-Technicatome, 75 - Paris (France)

2005-07-01

The RJH (Jules Horowitz reactor) is a 100 MWth research reactor, cooled and moderated by water, that has been designed to operate with high density (8 g U/cm{sup 3}) and low enrichment fuel (19.75%) uranium molybdenum fuel. Its main neutron performances are expected to be: -) maximum fast neutron flux (E > 0.907 MeV) in the sample: 5.10{sup 14} n/cm{sup 2}/s, -) maximum thermal neutron flux (E < 0.625 eV): 4.10{sup 14} n/cm{sup 2}/s, and -) maximal neutron damage: 16 dpa/year. RJH that will be built on the Cea's site of Cadarache, is scheduled to enter into service in 2014, it will take over the activities of the Osiris reactor and its operating life is planned to be over 50 years long. The Cabri research reactor is located on the Cadarache site, it has been operating since 1962 and is now undergoing important upgrading operations whose aim is to make the facility fit to study the behaviour of new nuclear fuels in accidental situations. The RES test reactor is a facility whose aim is to qualify nuclear fuels and core configurations of existing propulsion reactors onboard of aircraft carriers or submarines and to propose innovative concepts for future propulsion reactors. (A.C.)

Ageing management of AG3NET beam tubes in ORPHEE Research

International Nuclear Information System (INIS)

Florence, Gupta; Maud, Corbel

2013-01-01

The materials used in research reactors come from the best compromise between research needs and safety issues such as integrity of equipment during their whole life. For example, aluminium alloys such as AG3NET are interesting for research reactors dedicated to the production of neutron flux since they are transparent to neutrons but they become fragile under irradiation. Therefore the evolution of material's mechanical properties under irradiation is a topic of interest for research reactors safety and operators must implement an ageing management program of equipment subject to irradiation. This kind of aluminium alloys compound is used in many French research reactors like the Jules Horowitz reactor (JHR) and ORPHEE reactor operated by the Atomic Energy and Alternative Energies Commission (CEA) or the high flux reactor (HFR) operated by the Laue-Langevin Institute (ILL). Particularly, in the ORPHEE reactor, AG3NET is used for beam tubes, located in the heavy water tank surrounding the core, which guide neutrons towards experimental stations. The failure of a beam tube in ORPHEE reactor can lead to a reactivity insertion in the core, whose effects can be managed by the control rods system. Nevertheless, to control the effects of ageing on such equipment, the operator plans to replace the beam tubes on the basis of a criterion he defined. For the ORPHEE's second periodic safety review, the operator has re-evaluated the situation of the beam tubes with regard of this criterion and has established a beam tube replacement schedule. The 'Institut de Radioprotection et de Surete Nucleaire' (IRSN), as a technical support of the French nuclear safety authority, assessed the elements presented by the CEA for this periodic safety review and concluded that the replacement criterion used for these equipment lead to reach a fragile behaviour of the materials. Thus, the breaking of several beam tubes can't be excluded but this situation can leads to severe consequences on the

Nuclear fuels

International Nuclear Information System (INIS)

2008-01-01

-induced damages in structural materials, fuels and targets for the transmutation in FBR; 4 - the fuel of gas-cooled reactors: fuel particulates, behaviour under irradiation, mechanical modeling, the fuel for very high temperature reactors, the fuel for gas-cooled fast reactors; 5 - the fuel for research reactors; 6 - the Jules Horowitz reactor: a tool for the future fuel studies. (J.S.)

Welding Challenges in the nuclear context

International Nuclear Information System (INIS)

Delany, Fred; Raghunathan, Sayee; Rubir, Nicolas; Wiesner, Christoph

2013-06-01

Nuclear Power forms an essential part of the strategies deployed to provide the future global energy demands whilst meeting the obligations on CO 2 emission reduction targets. In the UK, plans across the political spectrum call for a substantial nuclear new-build (NNB) programme. This necessitates application of best practice design, fabrication and welding technology in the UK context as well as a consideration of current and future skill requirements. Existing nuclear technology covers a range of different designs, and many reactors have reached the end of their design life. The decommissioning of old plants and management of nuclear waste, especially high-level, long-life and spent fuel waste, therefore also requires ongoing attention. Welding is defined by ISO as a 'special process', as imperfections in welded/fabricated products, even after inspection, may become apparent only after the product is put in use or service. Thus, welding has a major influence on the quality and cost of the final product, as well as the operational and maintenance costs. Most current trends in welding process innovations focus on improving weld quality and productivity, or reducing the dependency on welder/operator skills. Materials research concentrates on improving the understanding of influence of the environment (irradiation, temperature, corrosion, fatigue) on long-term performance and on repair of existing plants or future designs that will require higher temperature materials. The ITER nuclear fusion and the Jules-Horowitz Research reactors also have unique demands on materials and welding processes. Through the Engineering the Future alliance, the UK has organised a review of the international lessons learnt during recent nuclear new-build projects, and welding has been identified as a critical area requiring particular attention for any future new-build activities. TWI chaired the group advising on welding issues resulting in recommendations for the UK NNB programme. Key

French school and World War First: neurological consequences of a frightening time.

Science.gov (United States)

Gomes, Marleide da Mota

2015-05-01

Some aspects of a dark period in the history of the modern neurology, that of the World War I (WWI), are here remembered, mainly by the neurological French School participation . Some personalities and their works related to the WWI are presented such as Joseph Babinski, Jules Froment, Clovis Vincent, Jules Joseph Dejerine, Augusta Déjérine-Klumpke, Jules Tinel, Pierre Marie, Achille Alexandre Souques, Charles Foix, and Georges Guillain.

French school and World War First: neurological consequences of a frightening time

Directory of Open Access Journals (Sweden)

Marleide da Mota Gomes

2015-05-01

Full Text Available Some aspects of a dark period in the history of the modern neurology, that of the World War I (WWI, are here remembered, mainly by the neurological French School participation . Some personalities and their works related to the WWI are presented such as Joseph Babinski, Jules Froment, Clovis Vincent, Jules Joseph Dejerine, Augusta Déjérine-Klumpke, Jules Tinel, Pierre Marie, Achille Alexandre Souques, Charles Foix, and Georges Guillain.

News from the world

International Nuclear Information System (INIS)

Anon.

2008-01-01

This document gathers short notices concerning the nuclear industry. Among them we find the following ones. A nuclear power plant will be built in Bulgaria by a Russian company, the plant is due to operate in 2013. An IAEA expert team has visited the Kashiwazaki-Kariwa site, a Japanese nuclear power plant involving 7 reactors and that underwent a severe earthquake in July 2007 (6.8 grades on the Richter scale). It appears that no major damage occurred on the reactors and that the various infra-structures involved in nuclear safety behaved better than expected. Kazakhstan has increased its uranium production by 25% to reach 6637 tonnes of extracted uranium. The Konrad well situated on the site of the ancient iron mines of Salzgitter, has been agreed by German authorities for the storage of radioactive wastes of low or intermediate level. The equipping works will last 4 years and the storage will begin in 2013. An opinion poll made in Sweden shows that almost half of the population support the construction of new nuclear power plants while Sweden is due to decommission all of its reactors within 20 years. The Russian authorities have announced the creation of a university dedicated to nuclear engineering. India has joined the international cooperation around the Jules Horowitz reactor (RJH reactor). China has become a full-fledged member of the Generation IV forum. American authorities have given their green light for a cooperation with Turkey on civil nuclear energy. (A.C.)

On stage at the Globe

CERN Document Server

2005-01-01

The Globe's first season this year is to be rounded off with two shows that are in perfect keeping with the centenary of the death of Jules Verne and Albert Einstein's theory of relativity. 'Signé Jules Verne' (Signed Jules Verne) The Miméscope company, which has already thrilled audiences at CERN with shows such as the 'Oracle of Delphi' and, more recently, 'Point de Suspension', returns with an interactive show entitled 'Signé Jules Verne'. Imagine a slightly crazy machine, which rolls along on wheels, floats, flies or moves in any other way you like, as long as it works on scientific principles. This is the task that Jules Verne sets his audience. Experiments, models, drawings, blueprints, he's interested in them all. In its typical style, Miméscope has created a world of enchantment that combines theatre, choreography, music and lighting effects in a show that evolves as a function of its audience. Performances at 3.00 p.m. on 4, 7, 10 and 11 December An interactive show for the general public...

Thermodynamic aspects of information transfer in complex dynamical systems

Science.gov (United States)

Cafaro, Carlo; Ali, Sean Alan; Giffin, Adom

2016-02-01

From the Horowitz-Esposito stochastic thermodynamical description of information flows in dynamical systems [J. M. Horowitz and M. Esposito, Phys. Rev. X 4, 031015 (2014), 10.1103/PhysRevX.4.031015], it is known that while the second law of thermodynamics is satisfied by a joint system, the entropic balance for the subsystems is adjusted by a term related to the mutual information exchange rate between the two subsystems. In this article, we present a quantitative discussion of the conceptual link between the Horowitz-Esposito analysis and the Liang-Kleeman work on information transfer between dynamical system components [X. S. Liang and R. Kleeman, Phys. Rev. Lett. 95, 244101 (2005), 10.1103/PhysRevLett.95.244101]. In particular, the entropic balance arguments employed in the two approaches are compared. Notwithstanding all differences between the two formalisms, our work strengthens the Liang-Kleeman heuristic balance reasoning by showing its formal analogy with the recent Horowitz-Esposito thermodynamic balance arguments.

Reactors licensing: proposal of an integrated quality and environment regulatory structure for nuclear research reactors in Brazil; Licenciamento de reatores: proposta de uma estrutura regulatoria integrada com abordagem em qualidade e meio ambiente para reatores de pesquisa no Brasil

Energy Technology Data Exchange (ETDEWEB)

Serra, Reynaldo Cavalcanti

2014-07-01

A new integrated regulatory structure based on quality and integrated issues has been proposed to be implemented on the licensing process of nuclear research reactors in Brazil. The study starts with a literature review about the licensing process in several countries, all of them members of the International Atomic Energy Agency. After this phase it is performed a comparative study with the Brazilian licensing process to identify good practices (positive aspects), the gaps on it and to propose an approach of an integrated quality and environmental management system, in order to contribute with a new licensing process scheme in Brazil. The literature review considered the following research nuclear reactors: Jules-Horowitz and OSIRIS (France), Hanaro (Korea), Maples 1 and 2 (Canada), OPAL (Australia), Pallas (Holand), ETRR-2 (Egypt) and IEA-R1 (Brazil). The current nuclear research reactors licensing process in Brazil is conducted by two regulatory bodies: the Brazilian National Nuclear Energy Commission (CNEN) and the Brazilian Institute of Environment and Renewable Natural Resources (IBAMA). CNEN is responsible by nuclear issues, while IBAMA by environmental one. To support the study it was applied a questionnaire and interviews based on the current regulatory structure to four nuclear research reactors in Brazil. Nowadays, the nuclear research reactor’s licensing process, in Brazil, has six phases and the environmental licensing process has three phases. A correlation study among these phases leads to a proposal of a new quality and environmental integrated licensing structure with four harmonized phases, hence reducing potential delays in this process. (author)

Research reactors

International Nuclear Information System (INIS)

Merchie, Francois

2015-10-01

This article proposes an overview of research reactors, i.e. nuclear reactors of less than 100 MW. Generally, these reactors are used as neutron generators for basic research in matter sciences and for technological research as a support to power reactors. The author proposes an overview of the general design of research reactors in terms of core size, of number of fissions, of neutron flow, of neutron space distribution. He outlines that this design is a compromise between a compact enough core, a sufficient experiment volume, and high enough power densities without affecting neutron performance or its experimental use. The author evokes the safety framework (same regulations as for power reactors, more constraining measures after Fukushima, international bodies). He presents the main characteristics and operation of the two families which represent almost all research reactors; firstly, heavy water reactors (photos, drawings and figures illustrate different examples); and secondly light water moderated and cooled reactors with a distinction between open core pool reactors like Melusine and Triton, pool reactors with containment, experimental fast breeder reactors (Rapsodie, the Russian BOR 60, the Chinese CEFR). The author describes the main uses of research reactors: basic research, applied and technological research, safety tests, production of radio-isotopes for medicine and industry, analysis of elements present under the form of traces at very low concentrations, non destructive testing, doping of silicon mono-crystalline ingots. The author then discusses the relationship between research reactors and non proliferation, and finally evokes perspectives (decrease of the number of research reactors in the world, the Jules Horowitz project)

Validation of structural design of JHR fuel element

International Nuclear Information System (INIS)

Brisson, S.; Miras, G.; Le Bourdonnec, L.; Lemoine, P.; Anselmet, M.C.; Marelle, V.

2010-01-01

The validation of the structural design of the Jules Horowitz Reactor fuel element was made by the Finite Element Method, starting from the Computer Aided Design. The JHR fuel element is a cylindrical assembly of three sectors composed of eight rolled fuel plates. A roll-swaging process is used to join the fuel plates to three aluminium stiffeners. The hydraulic gap between each plate is 1.95 mm. The JHR fuel assembly is fastened at both ends to the upper and lower endfittings by riveting. The main stresses are essentially thermal loads, imposed on the fuel zone of the plates. These thermal loads result from the nuclear heat flux (W/cm 2 ). The mechanical loads are mainly hydraulic thrust forces. The average coolant velocity is 15 m/s. Seismic effects are also studied. The fuel assembly is entirely modelled by thin shells. The model takes into account asymmetric thermal loads which often appear in Research Reactors. The mechanics of the fuel plates vary in function of the burn up. These mechanical properties are derived from the data sets used in the MAIA code, and the validity of the structure is demonstrable at throughout the life of the fuel. Results concerning displacement are compared to functional criteria, while results concerning stress are compared to RCC-MX criteria. The results of this analysis show that the mechanical and geometrical integrity of the JHR fuel elements is respected for Operating Categories 1 and 2. This paper presents the methodology of this demonstration for the results obtained. (author)

Reactors licensing: proposal of an integrated quality and environment regulatory structure for nuclear research reactors in Brazil

International Nuclear Information System (INIS)

Serra, Reynaldo Cavalcanti

2014-01-01

A new integrated regulatory structure based on quality and integrated issues has been proposed to be implemented on the licensing process of nuclear research reactors in Brazil. The study starts with a literature review about the licensing process in several countries, all of them members of the International Atomic Energy Agency. After this phase it is performed a comparative study with the Brazilian licensing process to identify good practices (positive aspects), the gaps on it and to propose an approach of an integrated quality and environmental management system, in order to contribute with a new licensing process scheme in Brazil. The literature review considered the following research nuclear reactors: Jules-Horowitz and OSIRIS (France), Hanaro (Korea), Maples 1 and 2 (Canada), OPAL (Australia), Pallas (Holand), ETRR-2 (Egypt) and IEA-R1 (Brazil). The current nuclear research reactors licensing process in Brazil is conducted by two regulatory bodies: the Brazilian National Nuclear Energy Commission (CNEN) and the Brazilian Institute of Environment and Renewable Natural Resources (IBAMA). CNEN is responsible by nuclear issues, while IBAMA by environmental one. To support the study it was applied a questionnaire and interviews based on the current regulatory structure to four nuclear research reactors in Brazil. Nowadays, the nuclear research reactor’s licensing process, in Brazil, has six phases and the environmental licensing process has three phases. A correlation study among these phases leads to a proposal of a new quality and environmental integrated licensing structure with four harmonized phases, hence reducing potential delays in this process. (author)

Nuclear fuels

International Nuclear Information System (INIS)

Beauvy, M.; Berthoud, G.; Defranceschi, M.; Ducros, G.; Guerin, Y.; Limoge, Y.; Madic, Ch.; Santarini, G.; Seiler, J.M.; Sollogoub, P.; Vernaz, E.; Guillet, J.L.; Ballagny, A.; Bechade, J.L.; Bonin, B.; Brachet, J.Ch.; Delpech, M.; Dubois, S.; Ferry, C.; Freyss, M.; Gilbon, D.; Grouiller, J.P.; Iracane, D.; Lansiart, S.; Lemoine, P.; Lenain, R.; Marsault, Ph.; Michel, B.; Noirot, J.; Parrat, D.; Pelletier, M.; Perrais, Ch.; Phelip, M.; Pillon, S.; Poinssot, Ch.; Vallory, J.; Valot, C.; Pradel, Ph.; Bonin, B.; Bouquin, B.; Dozol, M.; Lecomte, M.; Vallee, A.; Bazile, F.; Parisot, J.F.; Finot, P.; Roberts, J.F.

2009-01-01

fuel, Anticipated evolution of fuel in dry storage, Anticipated evolution of fuel in deep geological disposal); Boiling-water reactor fuel (Similarities, and differences with PWR fuel, Axial and radial zoning, Rod and channel box sizes, Poisoning and reactivity control, Cladding specific characteristics, Trends in fuel evolution); 3 - Liquid-metal-cooled fast reactor fuel: Fast-neutron irradiation damage in structural materials (Fast-neutron-induced damage in metals, What materials should be used?); Fuels and targets for fast-reactor transmutation (Fast reactors: reactors affording the ability to carry out effective actinide transmutation, Recycling: homogeneous, or heterogeneous?); 4 - gas-cooled reactor fuel: Particle fuel (From the initial concept to the advanced TRISO particle concept, Kernel fabrication processes, Particle coating by chemical vapor deposition, Fuel element fabrication: particle compaction, Characterization of fuel particles, and elements, From HTR fuel to VHTR and GFR fuels: the GAIA facility at CEA/Cadarache); Irradiation behavior of particle fuels (Particle fuel: a variety of failure modes for a high-strength object, The amoeba effect, Fission product behavior, and diffusion in particle fuels); Mechanical modeling of particle fuel; Very-high-temperature reactor (VHTR) fuel; Gas-cooled fast reactor (GFR) fuel (The specifications for GFR fuel, GFR fissile material, First containment baffler materials, GFR fuel element concepts); 5 - Research reactor fuels (A considerable feedback from experience, Conversion of French reactors to low-enriched (≤20% U-235)U 3 Si 2 fuel, Conversion of all reactors: R and D requirements for high-performance reactors, An 'advanced' research reactor fuel: UMo, The startup fuel for the Jules Horowitz Reactor (JHR) will still be U 3 Si 2 -Al; 6 - An instrument for future fuel research: the Jules Horowitz Reactor (JHR): Fuel irradiation experiments in JHR, JHR: a flexible instrument; 7 - Glossary-Index

Nuclear fuels

Energy Technology Data Exchange (ETDEWEB)

Beauvy, M.; Berthoud, G.; Defranceschi, M.; Ducros, G.; Guerin, Y.; Limoge, Y.; Madic, Ch.; Santarini, G.; Seiler, J.M.; Sollogoub, P.; Vernaz, E.; Guillet, J.L.; Ballagny, A.; Bechade, J.L.; Bonin, B.; Brachet, J.Ch.; Delpech, M.; Dubois, S.; Ferry, C.; Freyss, M.; Gilbon, D.; Grouiller, J.P.; Iracane, D.; Lansiart, S.; Lemoine, P.; Lenain, R.; Marsault, Ph.; Michel, B.; Noirot, J.; Parrat, D.; Pelletier, M.; Perrais, Ch.; Phelip, M.; Pillon, S.; Poinssot, Ch.; Vallory, J.; Valot, C.; Pradel, Ph.; Bonin, B.; Bouquin, B.; Dozol, M.; Lecomte, M.; Vallee, A.; Bazile, F.; Parisot, J.F.; Finot, P.; Roberts, J.F

2009-07-01

nature of spent nuclear fuel, Anticipated evolution of fuel in dry storage, Anticipated evolution of fuel in deep geological disposal); Boiling-water reactor fuel (Similarities, and differences with PWR fuel, Axial and radial zoning, Rod and channel box sizes, Poisoning and reactivity control, Cladding specific characteristics, Trends in fuel evolution); 3 - Liquid-metal-cooled fast reactor fuel: Fast-neutron irradiation damage in structural materials (Fast-neutron-induced damage in metals, What materials should be used?); Fuels and targets for fast-reactor transmutation (Fast reactors: reactors affording the ability to carry out effective actinide transmutation, Recycling: homogeneous, or heterogeneous?); 4 - gas-cooled reactor fuel: Particle fuel (From the initial concept to the advanced TRISO particle concept, Kernel fabrication processes, Particle coating by chemical vapor deposition, Fuel element fabrication: particle compaction, Characterization of fuel particles, and elements, From HTR fuel to VHTR and GFR fuels: the GAIA facility at CEA/Cadarache); Irradiation behavior of particle fuels (Particle fuel: a variety of failure modes for a high-strength object, The amoeba effect, Fission product behavior, and diffusion in particle fuels); Mechanical modeling of particle fuel; Very-high-temperature reactor (VHTR) fuel; Gas-cooled fast reactor (GFR) fuel (The specifications for GFR fuel, GFR fissile material, First containment baffler materials, GFR fuel element concepts); 5 - Research reactor fuels (A considerable feedback from experience, Conversion of French reactors to low-enriched ({<=}20% U-235)U{sub 3}Si{sub 2} fuel, Conversion of all reactors: R and D requirements for high-performance reactors, An 'advanced' research reactor fuel: UMo, The startup fuel for the Jules Horowitz Reactor (JHR) will still be U{sub 3}Si{sub 2}-Al; 6 - An instrument for future fuel research: the Jules Horowitz Reactor (JHR): Fuel irradiation experiments in JHR, JHR: a flexible

Audio App Brings a Better Nights Sleep

Science.gov (United States)

2015-01-01

Neuroscientist Seth Horowitz was part of a NASA-funded team at State University of New York Stony Brook demonstrating that low-amplitude vestibular stimulation could induce sleep. After recognizing the same stimulation could be applied through sound, Horowitz founded Sleep Genius, located in Park City, Utah, and released a mobile app of the same name that helps people to get a more restful sleep.

Millions and Billions of Channels

Science.gov (United States)

Leigh, Darren; Horowitz, Paul

The history of the Harvard SETI group is inextricably linked with the history of Paul Horowitz. Horowitz became enamored with SETI as a student at Harvard, reading Ed Purcell's paper "Radio Astronomy and Communication Through Space" (Purcell, 1960), discussing with his roommates a class that Carl Sagan was teaching there using a draft of Shklovskii and Sagan's "Intelligent Life in the Universe" (Shklovskii and Sagan, 1966) as a text, and finally attending a Loeb Lecture series at Harvard by Frank Drake (Drake, 1969). The series was officially about pulsars but Drake did manage to slip in one inspiring talk about SETI. Horowitz says that "It was this lecture that launched me into this field; it was a revelation that you could go beyond idle speculation - you could actually calculate stuff."

Comparison of the HadGEM2 climate-chemistry model against in situ and SCIAMACHY atmospheric methane data

Directory of Open Access Journals (Sweden)

G. D. Hayman

2014-12-01

Full Text Available Wetlands are a major emission source of methane (CH4 globally. In this study, we evaluate wetland emission estimates derived using the UK community land surface model (JULES, the Joint UK Land Earth Simulator against atmospheric observations of methane, including, for the first time, total methane columns derived from the SCIAMACHY instrument on board the ENVISAT satellite. Two JULES wetland emission estimates are investigated: (a from an offline run driven with Climatic Research Unit–National Centers for Environmental Prediction (CRU-NCEP meteorological data and (b from the same offline run in which the modelled wetland fractions are replaced with those derived from the Global Inundation Extent from Multi-Satellites (GIEMS remote sensing product. The mean annual emission assumed for each inventory (181 Tg CH4 per annum over the period 1999–2007 is in line with other recently published estimates. There are regional differences as the unconstrained JULES inventory gives significantly higher emissions in the Amazon (by ~36 Tg CH4 yr−1 and lower emissions in other regions (by up to 10 Tg CH4 yr−1 compared to the JULES estimates constrained with the GIEMS product. Using the UK Hadley Centre's Earth System model with atmospheric chemistry (HadGEM2, we evaluate these JULES wetland emissions against atmospheric observations of methane. We obtain improved agreement with the surface concentration measurements, especially at high northern latitudes, compared to previous HadGEM2 runs using the wetland emission data set of Fung et al. (1991. Although the modelled monthly atmospheric methane columns reproduce the large-scale patterns in the SCIAMACHY observations, they are biased low by 50 part per billion by volume (ppb. Replacing the HadGEM2 modelled concentrations above 300 hPa with HALOE–ACE assimilated TOMCAT output results in a significantly better agreement with the SCIAMACHY observations. The use of the GIEMS product to constrain the JULES

Thermal decomposition and kinetic evaluation of decanted 2,4,6-trinitrotoluene (TNT) for reutilization as composite material

Science.gov (United States)

Ahmed, M. F.; Hussain, A.; Malik, A. Q.

2016-08-01

Use of energetic materials has long been considered for only military purposes. However, it is very recent that their practical applications in wide range of commercial fields such as mining, road building, under water blasting and rocket propulsion system have been considered. About 5mg of 2,4,6-trinitrotoluene (TNT) in serviceable (Svc) as well as unserviceable (Unsvc) form were used for their thermal decomposition and kinetic parameters investigation. Thermogravimetric/ differential thermal analysis (TG/DTA), X-ray diffraction (XRD) and Scanning electron microscope (SEM) were used to characterize two types of TNT. Arrhenius kinetic parameters like activation energy (E) and enthalpy (AH) of both TNT samples were determined using TG curves with the help of Horowitz and Metzger method. Simultaneously, thermal decomposition range was evaluated from DTA curves. Distinct diffraction peaks showing crystalline nature were obtained from XRD analysis. SEM results indicated that Unsvc TNT contained a variety of defects like cracks and porosity. Similarly, it is observed that thermal as well as kinetic behavior of both TNT samples vary to a great extent. Likewise, a prominent change in the activation energies (E) of both samples is observed. This in-depth study provides a way forward in finding solutions for the safe reutilization of decanted TNT.

Improving the representation of radiation interception and photosynthesis for climate model applications

International Nuclear Information System (INIS)

Mercado, Lina M.; Huntingford, Chris; Gash, John H.C.; Cox, Peter M.; Jogireddy, Venkata

2007-01-01

The Joint UK Land Environment Simulator (JULES) (which is based on Met Office Surface Exchange Scheme MOSES), the land surface scheme of the Hadley Centre General Circulation Models (GCM) has been improved to contain an explicit description of light interception for different canopy levels, which consequently leads to a multilayer approach to scaling from leaf to canopy level photosynthesis. We test the improved JULES model at a site in the Amazonian rainforest by comparing against measurements of vertical profiles of radiation through the canopy, eddy covariance measurements of carbon and energy fluxes, and also measurements of carbon isotopic fractionation from top canopy leaves. Overall, the new light interception formulation improves modelled photosynthetic carbon uptake compared to the standard big leaf approach used in the original JULES formulation. Additional model improvement was not significant when incorporating more realistic vertical variation of photosynthetic capacity. Even with the improved representation of radiation interception, JULES simulations of net carbon uptake underestimate eddy covariance measurements by 14%. This discrepancy can be removed by either increasing the photosynthetic capacity throughout the canopy or by explicitly including light inhibition of leaf respiration. Along with published evidence of such inhibition of leaf respiration, our study suggests this effect should be considered for inclusion in other GCMs

Alle ønsker sig en Lego-aktie til jul

DEFF Research Database (Denmark)

Iversen, Martin Jes

2014-01-01

Både små og store investorer får julelys i øjnene ved tanken om at eje et stykke af Lego. På sigt kunne en børsnotering gøre Danmark til et rigere land.......Både små og store investorer får julelys i øjnene ved tanken om at eje et stykke af Lego. På sigt kunne en børsnotering gøre Danmark til et rigere land....

Experimental investigation of thermal limits in parallel plate configuration for the future material testing reactor (JHR)

International Nuclear Information System (INIS)

Brigitte Noel

2005-01-01

Full text of publication follows: The design of the future material testing reactor, named Jules Horowitz Reactor and dedicated to technological irradiations, will allow very high performances. The JHR will be cooled and moderated by light water. The preliminary core of JHR consists of 46 assemblies, arranged in a triangular lattice inside a rectangular aluminium matrix. It is boarded on two sides by a beryllium reflector. The other two sides are left free in order to introduce mobile irradiation devices. The JHR assembly would be composed of 3 x 6 cylindrical fuel plates maintained by 3 stiffeners. The external diameter of the assembly is close to 8 cm with a 600 mm heated length, coolant channels having a 1.8 mm gap width. The JHR core must be designed to accommodate high power densities using a high coolant mass flux and sub-cooling level at moderate pressure. The JHR core configuration with multi-channels is subject to a potential excursive instability, called flow redistribution, and is distinguished from a true critical heat flux which would occur at a fixed channel flow rate. At thermal-hydraulic conditions applicable to the JHR, the availability of experimental data for both flow redistribution and CHF is very limited. Consequently, a thermal-hydraulic test facility (SULTAN-RJH) was designed and built in CEA-Grenoble to simulate a full-length coolant sub-channel representative of the JHR core, allowing determination of both thermal limits under relevant thermal hydraulics conditions. The SULTAN-RJH test section simulates a single sub-channel in the JHR core with a cross section corresponding to a mean span (∼50 mm) that has a full reactor length (600 mm), the same flow channel gap (1.5 mm) and Inconel plates of 1 mm thickness. The tests with light water flowing vertically upward will investigate a heat flux range of 0-7 MW/m 2 , velocity range of 0.6-18 m/s, exit pressure range of 0.2-1.0 MPa and inlet temperature range of 25-180 deg. C. The test section

The French development program for a UMo fuel

International Nuclear Information System (INIS)

Romano, R.; Nigon, J.L.; Languille, A.; Le Borgne, E.; Freslon, H.

1999-01-01

Until now high density U 3 Si 2 fuels were satisfactory for LEU conversion of certain reactors, but their use is limited because their density is physically limited to 5,8 gU/cm3 and they have very poor reprocessing capacities. After the end of the present US return policy in may 2006, the reactor operators will be indeed in a very difficult position with silicides. The international community is thus interested in a very high density fuel with good reprocessing capacities in order to convert most reactors and to find a back end solution. In France, CEA, CERCA, and COGEMA have thus launched an important program in order to sort potential candidates of uranium alloys. UMo is one of the most interesting candidates. After the selection of UMo alloys, France has pooled different skills to start an important program on UMo fuels: CEA has started an important project for a new reactor (Jules Horowitz); CERCA is the main manufacturer for MTR fuel; TECHNICATOME is the design expert for research reactors and associated cores; FRAMATOME is the parent company of CERCA and is interested in the development of new reactors; COGEMA is interested in reprocessing spent fuels. This new fuel has three aims: to allow reactors to benefit from a high performing fuel; to have a reprocessable fuel to limit the fuel storage period and the associate safety problem, and solve the back end issue; to support the international effort for non proliferation involving the end of the use of HEU. This high density fuel will decrease the number of fuel assemblies needed to run the reactors and decrease the global cost of the fuel cycle as the back end management cost is in proportion with the quantity of fuel. Reactor operators will thus derive an advantage from this new fuel, in terms of economy

Vision Restoration with a Collagen Cross-linked Boston Keratoprosthesis Unit

Science.gov (United States)

2017-09-01

Esen Akpek 4 W.K. Kellogg Eye Center Dr. Shahzad Mian 5 The Jules Stein Eye Institute Dr. Anthony Aldave 6 Illinois Eye and Ear Infirmary Dr. Jose...Principal Investigator 1 Mass Eye and Ear Infirmary Dr. Joseph Ciolino 3 The Willmer Eye Institute Dr. Esen Akpek 4 W.K. Kellogg Eye Center Dr...Dr. Esen Akpek 4 W.K. Kellogg Eye Center Dr. Shahzad Mian 5 The Jules Stein Eye Institute Dr. Anthony Aldave 7 Cincinnati Eye Institute Dr. Edward

Tasks and communication as an avenue to enhance parenting of children birth-5 years: an integrative review.

Science.gov (United States)

Mooney-Doyle, Kim; Deatrick, Janet A; Horowitz, June Andrews

2015-01-01

Every day, normative functions of parenting and their significance are under-investigated. An integrative review of tasks and communication involved in parenting young children informed by Horowitz (1995) and Blumer (1969) was conducted.Research articles consistent with inclusion criteria were published from 1995 to 2013 and focused on parenting tasks and communication. Themes consistent with Horowitz and Blumer were identified. Nurses are reminded about the significance of attending to the everyday, normative work of parenting young children, the potential meaning derived from this work, and the importance of assessing parental development as well as the importance of continuing research in this area. Copyright © 2015 Elsevier Inc. All rights reserved.

Comparison of Calibration of Sensors Used for the Quantification of Nuclear Energy Rate Deposition

International Nuclear Information System (INIS)

Brun, J.; Reynard-Carette, C.; Tarchalski, M.; Pytel, K.; Lyoussi, A.; Fourmentel, D.; Villard, J.F.; Jagielski, J.

2015-01-01

This present work deals with a collaborative program called GAMMA-MAJOR 'Development and qualification of a deterministic scheme for the evaluation of GAMMA heating in MTR reactors with exploitation as example MARIA reactor and Jules Horowitz Reactor' between the National Centre for Nuclear Research of Poland, the French Atomic Energy and Alternative Energies Commission and Aix Marseille University. One of main objectives of this program is to optimize the nuclear heating quantification thanks to calculation validated from experimental measurements of radiation energy deposition carried out in irradiation reactors. The quantification of the nuclear heating is a key data especially for the thermal, mechanical design and sizing of irradiation experimental devices in specific irradiated conditions and locations. The determination of this data is usually performed by differential calorimeters and gamma thermometers such as used in the experimental multi-sensors device called CARMEN 'Calorimetric en Reacteur et Mesures des Emissions Nucleaires'. In the framework of the GAMMA-MAJOR program a new calorimeter was designed for the nuclear energy deposition quantification. It corresponds to a single-cell calorimeter and it is called KAROLINA. This calorimeter was recently tested during an irradiation campaign inside MARIA reactor in Poland. This new single-cell calorimeter differs from previous CALMOS or CARMEN type differential calorimeters according to three main points: its geometry, its preliminary out-of-pile calibration, and its in-pile measurement method. The differential calorimeter, which is made of two identical cells containing heaters, has a calibration method based on the use of steady thermal states reached by simulating the nuclear energy deposition into the calorimeter sample by Joule effect; whereas the single-cell calorimeter, which has no heater, is calibrated by using the transient thermal response of the sensor (heating and cooling

Comparison of Calibration of Sensors Used for the Quantification of Nuclear Energy Rate Deposition

Energy Technology Data Exchange (ETDEWEB)

Brun, J.; Reynard-Carette, C. [Aix Marseille Universite, CNRS, Universite de Toulon, IM2NP UMR 7334, 13397, Marseille (France); Tarchalski, M.; Pytel, K. [National Centre for Nuclear Research A. Soltana 7, 05-400 Swierk (Poland); Lyoussi, A.; Fourmentel, D.; Villard, J.F. [CEA, DEN, DER, Instrumentation Sensors and Dosimetry Laboratory, Cadarache, F-13108 St-Paul-Lez-Durance (France); Jagielski, J. [National Centre for Nuclear Research A. Soltana 7, 05-400 Swierk (Poland); Institute of Electronic Materials Technolgy, Wolczynska 133, 01-919 Warszawa (Poland)

2015-07-01

This present work deals with a collaborative program called GAMMA-MAJOR 'Development and qualification of a deterministic scheme for the evaluation of GAMMA heating in MTR reactors with exploitation as example MARIA reactor and Jules Horowitz Reactor' between the National Centre for Nuclear Research of Poland, the French Atomic Energy and Alternative Energies Commission and Aix Marseille University. One of main objectives of this program is to optimize the nuclear heating quantification thanks to calculation validated from experimental measurements of radiation energy deposition carried out in irradiation reactors. The quantification of the nuclear heating is a key data especially for the thermal, mechanical design and sizing of irradiation experimental devices in specific irradiated conditions and locations. The determination of this data is usually performed by differential calorimeters and gamma thermometers such as used in the experimental multi-sensors device called CARMEN 'Calorimetric en Reacteur et Mesures des Emissions Nucleaires'. In the framework of the GAMMA-MAJOR program a new calorimeter was designed for the nuclear energy deposition quantification. It corresponds to a single-cell calorimeter and it is called KAROLINA. This calorimeter was recently tested during an irradiation campaign inside MARIA reactor in Poland. This new single-cell calorimeter differs from previous CALMOS or CARMEN type differential calorimeters according to three main points: its geometry, its preliminary out-of-pile calibration, and its in-pile measurement method. The differential calorimeter, which is made of two identical cells containing heaters, has a calibration method based on the use of steady thermal states reached by simulating the nuclear energy deposition into the calorimeter sample by Joule effect; whereas the single-cell calorimeter, which has no heater, is calibrated by using the transient thermal response of the sensor (heating and cooling

Dimensioning the EVITA semi-open loop at BR2 for qualification of full size JHR fuel elements

International Nuclear Information System (INIS)

Gouat, Philippe

2011-01-01

Research highlights: → Research reactor fuel (LEU) qualification as part of the licensing process of the JHR reactor. → Thermal-hydraulic dimensioning process of fuel irradiation installation. → We compare the predicted pressure profile in the installation with in situ measured values. - Abstract: The Jules Horowitz Reactor (JHR) is the next generation research reactor from CEA and which commissioning is foreseen in 2014. Prior to acquiring the exploitation license, the fuel elements have to be qualified for their intended functioning power. The only facility capable to perform this task is the Belgian research reactor BR2, due to its similar thermal-hydraulic parameters. At the moment, one has already tested the fuel plates separately. The preparation of the JHR safety report still needs the test of full size elements. This JHR fuel element is broader and more powerful than a standard BR2 fuel element, and one cannot perform an irradiation by simply interchanging them. However, BR2 has 200 mm channels at its disposal, which can be adapted to give the correct hydraulic diameter. One also needs an additional pump to deliver the necessary cooling flow rate for the higher power. This paper describes the dimensioning of the EVITA semi-open loop, which has been built at BR2 to irradiate full size JHR fuel elements and qualify them for the foreseen exploitation parameters. One explains here the followed methodology to quantify the required additional head for the booster pump and to determine the pressure profile along the circuit and the safety margin on the fuel. This methodology relies only on a priori calculations without any measurement on full size installation subpart as usual before the assembly in controlled zone. The article also explains how the original JHR thermal hydraulic safety calculation scheme was adapted to the BR2 environment. One also compares the measurement results on the fully built installation with our previsions. Our models compare well

Zigzag et « carré plastique » haïtiens en Amérique du nord à travers l’Autobiographie américaine de Dany Laferrière

OpenAIRE

Olivier-Messonnier, Laurence

2015-01-01

L’ « Autobiographie américaine » de Dany Laferrière et le « carré plastique » de Léonel Jules, artistes et amis haïtiens émigrés au Québec, déconstruisent la ville américaine par l’éclatement textuel et la plasticité picturale. Mythifient-ils pour autant le berceau natal ? L’écriture plastique et poétique efface les frontières. The « American Autobiography » by Dany Laferrière and the « Carré Plastique » by Léonel Jules, Haitian artists and friends who emigrated to Quebec, deconstruct the ...

Nuclear heating measurements by in-pile calorimetry: prospective works for a microsensor design

Energy Technology Data Exchange (ETDEWEB)

Reynard-Carette, C.; Carette, M.; Aguir, K.; Bendahan, M.; Fiorido, T. [Aix Marseille Universite, CNRS, Universite de Toulon, IM2NP UMR 7334, 13397, Marseille (France); Lyoussi, A.; Fourmentel, D.; Villard, J.F. [CEA, DEN, DER, Instrumentation Sensors and Dosimetry Laboratory, Cadarache, F-13108 (France); Barthes, M.; Lanzetta, F.; Layes, G.; Vives, S. [FEMTO-ST, UMR 6174, Departement ENERGIE, Universite de Franche-Comte, 90000, Belfort (France)

2015-07-01

Since 2009 works have been performed in the framework of joint research programs between CEA and Aix-Marseille University. The main aim of these programs is to design and develop in-pile instrumentations, advanced calibration procedure and accurate measurement methods in particular for the new Material Testing Reactor (MTR) under construction in the South of France: Jules Horowitz Reactor (JHR). One major sensor is a specific radiometric calorimeter, which was studied out-of-pile from a thermal point of view and in-pile during irradiation campaigns. This sensor type is dedicated to measurements of nuclear heating (energy deposition rate per mass unit induced by interactions between nuclear rays and matter) inside experimental channels of MTRs. This kind of in-pile calorimeter corresponds to heat flux calorimeter exchanging with the external cooling fluid. This thermal running mode allows the establishment of steady thermal conditions inside the sensor to carry out online continuous measurements inside the reactor (core or reflector). Two main types of calorimeters exist. The first type consists of a single cell calorimeter. It is divided into a sample of material to be tested and a jacket instrumented with two thermocouples or a single thermocouple (Gamma Thermometer). The second, called a differential calorimeter, is composed of two superposed twin cells (a measurement cell containing a sample of material, and a reference cell to remove the heating of the cell body) instrumented with four thermocouples and two electrical heaters. Contrary to a single-cell calorimeter, a differential calorimeter allows the compensation of the parasite nuclear heating of the sensor body or jacket. Moreover, it possesses interesting advantages: thanks to the heaters embedded in the cells, three different measurement methods can be applied during irradiations to quantify nuclear heating. The first one is based on the use of out-of-pile calibration curves obtained by generating a heat

Solid-state reaction kinetics of neodymium doped magnesium hydrogen phosphate system

Science.gov (United States)

Gupta, Rashmi; Slathia, Goldy; Bamzai, K. K.

2018-05-01

Neodymium doped magnesium hydrogen phosphate (NdMHP) crystals were grown by using gel encapsulation technique. Structural characterization of the grown crystals has been carried out by single crystal X-ray diffraction (XRD) and it revealed that NdMHP crystals crystallize in orthorhombic crystal system with space group Pbca. Kinetics of the decomposition of the grown crystals has been studied by non-isothermal analysis. The estimation of decomposition temperatures and weight loss has been made from the thermogravimetric/differential thermo analytical (TG/DTA) in conjuncture with DSC studies. The various steps involved in the thermal decomposition of the material have been analysed using Horowitz-Metzger, Coats-Redfern and Piloyan-Novikova equations for evaluating various kinetic parameters.

"Gypsy" ehk killuke Ameerikat meie jaoks / Martin Gorris

Index Scriptorium Estoniae

Gorris, Martin

2001-01-01

2. dets. esietendus Vanemuises Ameerika vodevillistaari ja striptiisikuninganna Rose Louise Hovicki memuaaridel põhinev Jule Styne'i muusikal "Gypsy", lavastaja Mare Tommingas, osades Silvi Vrait ja Helena Merzin

Syntax, Semantics, and Intentional Aspects | Jacobson-Horowitz ...

African Journals Online (AJOL)

The main goal of the paper is to argue against a third related assumption, namely that what is responsible for a difference in meaning between co-referential expressions is the computational difference in the cognitive functioning of the expressions. "Intentional aspects" of expressions – those features which their meanings ...

Punane Veski ja plakatikunsti algus / Riina Robinson

Index Scriptorium Estoniae

Robinson, Riina

2007-01-01

Prantsuse plakatikunsti loojast Jules Cheret'st, ühest silmapaistvamast plakati- ja maalikunstnikust Henri Toulouse-Lautrecist, tema plakatite kangelannadest, kankaani tantsinud Louise Weberist ja Jane Avrilist ning Moulin Rouge'ist

Lennujaamast ja parunist puu otsas : [lugemiselamustest] / Ülar Ploom

Index Scriptorium Estoniae

Ploom, Ülar

2007-01-01

Maailmaklassikast: Mark Twaini "Huckelberry Finni seiklused", Jules Verne'i "Saladuslik saar", Gabriel García Márquezi "Sada aastat üksildust", Aleksandr Erteli "Gardeninid", Italo Calvino "Parun puu otsas"

2342-IJBCS-Article-Ngueguim Jules Roger

African Journals Online (AJOL)

hp

4Institut de la Recherche Agricole pour le Développement (IRAD), Yokadouma, Cameroun. 5Departement ..... définition, le premier quartile, d'une série ordonnée ..... le site. Structure de population. Les structures de population présentent la répartition des arbres en fonction de leur taille dans un peuplement. Ces outils sont.

407-IJBCS-Article- Ngueguim Jules R

African Journals Online (AJOL)

Dr GATSING

2011 International Formulae Group. All rights ... principaux marchés de forêt dense humide du. Cameroun ... modes d'appropriation de l'arbre. Cela affecte particulièrement les familles rurales qui ont déjà du mal à .... rend leur accès facile.

2363-IJBCS-Article-Kouadio Nguessan Jules

African Journals Online (AJOL)

hp

Available online at http://ajol.info/index.php/ijbcs ... Evaluation de l'activité des feuilles de Mallotus oppositifolius (Geisel.) ... 3 Centre Suisse de Recherche Scientifique en Côte d'Ivoire, Côte d'Ivoire. ... hydro-méthanolique et aqueux des feuilles de cette plante sur des bactéries .... Le support bactérien était composé de.

2363-IJBCS-Article-Kouadio Nguessan Jules

African Journals Online (AJOL)

hp

de santé publique à cause de leur fréquence et de leur gravité. En effet, elles sont à l'origine de plus de 17 millions de décès par an dans le monde dont plus de la moitié provient du seul continent africain (OMS, 2006). Ainsi, la découverte des antibiotiques a été un véritable soulagement pour l'humanité car ces remèdes ...

2343-IJBCS-Article-Ngueguim Jules Roger

African Journals Online (AJOL)

hp

4University of Ngaoundéré, Faculty of Science, Department of Biological ... de Paris (MNHN) and the Service d'Action Culturelle of France Embassy in ..... management may allow plantations to ... JRN initiated the research project, did the data ...

Swimming Behavior of Individual Zooplankters During Night-Time Foraging

National Research Council Canada - National Science Library

McGehee, Duncan

1998-01-01

Amatzia Genin, Jules Jaffe, Duncan McGehee developed a method for automatically tracking individual plankters swimming through the imaging volume, and applied the method to track approximately 280,000 animals...

"Thais" muusika on fenomenaalne / Veronika Džiojeva ; intervjueerinud Silja Joon

Index Scriptorium Estoniae

Džiojeva, Veronika

2009-01-01

Küsimustele vastab 22. mail Pärnu Endla teatris esietenduva Jules Massenet' ooperi "Thais" nimiosatäitja, 2007. aastal toimunud Klaudia Taevi nim. rahvusvahelise ooperilauljate konkursi laureaat Veronika Džiojeva

Advanced instrumentation and analysis methods for in-pile thermal and nuclear measurements: from out-of-pile studies to irradiation campaigns

Energy Technology Data Exchange (ETDEWEB)

Reynard-Carette, C. [Aix Marseille Universite, CNRS, Universite de Toulon, IM2NP UMR 7334, 13397, Marseille (France); Lyoussi, A. [CEA, DEN, DER, Instrumentation Sensors and Dosimetry Laboratory, Cadarache, F-13108 (France)

2015-07-01

Research and development on nuclear fuel behavior under irradiations and accelerated ageing of structure materials is a key issue for sustainable nuclear energy in order to meet specific needs by keeping the best level of safety. A new Material Testing Reactor (MTR), the Jules Horowitz Reactor (JHR) currently under construction in the South of France in the CEA Cadarache research centre will offer a real opportunity to perform R and D programs and hence will crucially contribute to the selection, optimization and qualification of innovative materials and fuels. To perform such programs advanced accurate and innovative experiments, irradiation devices that contain material and fuel samples are required to be set up inside or beside the reactor core. These experiments needs beforehand in situ and on line sophisticated measurements to accurately reach specific and determining parameters such as thermal and fast neutron fluxes, nuclear heating and temperature conditions to precisely monitor and control the conducted assays. Consequently, since 2009 CEA and Aix-Marseille University collaborate in order to design and develop a new multi-sensor device which will be dedicated to measuring profiles of such conditions inside the experimental channels of the JHR. These works are performed in the framework of two complementary joint research programs called MAHRI-BETHY and INCORE. These programs couple experimental studies carried out both out-of nuclear fluxes (in laboratory) and under irradiation conditions (in OSIRIS MTR reactor in France and MARIA MTR reactor in Poland) with numerical works realized by thermal simulations (CAST3M code) and Monte Carlo simulations (MCNP code). These programs deal with three main aims. The first one corresponds to the design and/or the test of new in-pile instrumentation. The second one concerns the development of advanced calibration procedures in particular in the case of one specific sensor: a differential calorimeter used to quantify

Advanced instrumentation and analysis methods for in-pile thermal and nuclear measurements: from out-of-pile studies to irradiation campaigns

International Nuclear Information System (INIS)

Reynard-Carette, C.; Lyoussi, A.

2015-01-01

Research and development on nuclear fuel behavior under irradiations and accelerated ageing of structure materials is a key issue for sustainable nuclear energy in order to meet specific needs by keeping the best level of safety. A new Material Testing Reactor (MTR), the Jules Horowitz Reactor (JHR) currently under construction in the South of France in the CEA Cadarache research centre will offer a real opportunity to perform R and D programs and hence will crucially contribute to the selection, optimization and qualification of innovative materials and fuels. To perform such programs advanced accurate and innovative experiments, irradiation devices that contain material and fuel samples are required to be set up inside or beside the reactor core. These experiments needs beforehand in situ and on line sophisticated measurements to accurately reach specific and determining parameters such as thermal and fast neutron fluxes, nuclear heating and temperature conditions to precisely monitor and control the conducted assays. Consequently, since 2009 CEA and Aix-Marseille University collaborate in order to design and develop a new multi-sensor device which will be dedicated to measuring profiles of such conditions inside the experimental channels of the JHR. These works are performed in the framework of two complementary joint research programs called MAHRI-BETHY and INCORE. These programs couple experimental studies carried out both out-of nuclear fluxes (in laboratory) and under irradiation conditions (in OSIRIS MTR reactor in France and MARIA MTR reactor in Poland) with numerical works realized by thermal simulations (CAST3M code) and Monte Carlo simulations (MCNP code). These programs deal with three main aims. The first one corresponds to the design and/or the test of new in-pile instrumentation. The second one concerns the development of advanced calibration procedures in particular in the case of one specific sensor: a differential calorimeter used to quantify

Genetics Home Reference: Angelman syndrome

Science.gov (United States)

... Gentile JK, Tan WH, Horowitz LT, Bacino CA, Skinner SA, Barbieri-Welge R, Bauer-Carlin A, Beaudet ... article on PubMed Central Tan WH, Bacino CA, Skinner SA, Anselm I, Barbieri-Welge R, Bauer-Carlin ...

Journey to the Center of Icy Moons

Data.gov (United States)

National Aeronautics and Space Administration — In Jules Verne's classic science fiction, Journey to the Center of the Earth, Professor Otto Lidenbrock and his company descend into an Icelandic volcano to explore...

Vegetative propagation of twelve fodder tree species indigenous to ...

African Journals Online (AJOL)

Vegetative propagation of twelve fodder tree species indigenous to the Sahel, West Africa. Catherine Ky-Dembele, Jules Bayala, Antoine Kalinganire, Fatoumata Tata Traoré, Bréhima Koné, Alain Olivier ...

Endlas etendub lugu mungast ja kurtisaanist / Silja Joon

Index Scriptorium Estoniae

Joon, Silja, 1966-

2008-01-01

Rahvusvahelise ooperimuusika festivali PromFest raames järgmise aasta 22. mail Pärnu teatris Endla esietenduvast Jules Massenet' ooperist "Thais" (peaosades eelmise Klaudia Taevi nimelise konkursi laureaadid Veronika Dzhiojeva ja Ilja Siltshukov)

Massenet "Thaisi" näeb otseülekandes kinolinal / Toomas Kuter

Index Scriptorium Estoniae

Kuter, Toomas, 1965-

2008-01-01

Forum Cinemas toob oktoobrist maini Tallinnas Coca-Cola Plazas ja Tartus Ekraanis publikuni New Yorgi Metropolitan Opera etenduste HD-otseülekanded, 20. dets. kantakse üle Jules Massenet' ooper "Thais", peaosas Renee Fleming

Aplicación de modelos matemáticos para el estudio de degradación térmica de polímeros

Directory of Open Access Journals (Sweden)

Marina P. Arrieta

2013-06-01

Full Text Available The use of mathematical models in the field of education and training is becoming increasingly common. Specifically, in Materials Engineering area, where thermal analysis techniques widely contributes to study the materials thermal decomposition. The application of kinetic methods allows obtaining some parameters that are useful for predicting the behavior of polymers under certain temperature conditions. Polymeric materials are constantly subjected to degradation processes due to its processing, reuse and/or disposal, so that studies associated with thermal degradation of these materials are of particular interest. In this sense, the application of mathematical models for understanding the phenomena of thermal degradation of polymeric materials is useful for undergraduate and research students, MSc. and PhD respectively. Mathematical models can be based on the conversion degree (Friedman, Horowitz and Metzger, Van Krevelen, Coats and Redfern or, based on the rate of heating measurement (Flynn y Wall. Thermogravimetric analysis (TGA is an analytical technique which determines the weight loss as a function of temperature or time, allowing to associate specific changes such degradation processes. In this work, we applied different mathematical models to study the thermal degradation of polymeric materials with the main objective that students be able to understand the differences and similarities founded in the materials behavior depending on the mathematical model used.

Detjam kapitana Granta privezli iz Ameriki bizonov i straussov / Margarita Golovanova

Index Scriptorium Estoniae

Golovanova, Margarita

2006-01-01

Kuidas "Mosfilmis" filmiti Jules Verne'i järgi mängufilmi "Kapten Granti lapsed" : režissöör Vladimir Vainshtok : helilooja Isaak Dunajevski : näitlejad Nikolai Tsherkassov, Jakov Segel : NSV Liit 1936

and n Ogheneovo, EE; Ejiofor, C. and Asagba, PO Abstract

African Journals Online (AJOL)

to calculate interest on investments, growth and decline .... Ahlfors, L. V. (1953), Complex Analysis, McGraw-Hill book Company Inc., U.S.A., pp. 56 – 80. [3] ... Horowitz, E. and Sahni, S. (1978), Fundamentals of Computer Algorithms, Library of.

Quasiconfigurations: an approach to effective forces

International Nuclear Information System (INIS)

Poves, A.; Pasquini, E.; Zuker, A.P.

1978-01-01

Many body effective operators appear naturally by dressing states through a perturbative unitary transformation. They have forms that differ from those obtained in the Bloch-Horowitz approach. The fsub(7/2)sup(n) problem is treated explicitly. Pandya's transforms are generalized

Kirjandus ja vabamüürlus / Paavo Matsin

Index Scriptorium Estoniae

Matsin, Paavo, 1970-

2009-01-01

Loetletakse vabamüürlastest kirjanikke (pikemalt Jules Verne'ist, Gustav Meyrinkist, Rudyard Kiplingist ja Mait Metsanurgast) ning vabamüürlikke tegelasi või motiive kasutanud kirjanikke (Lev Tolstoi, Fjodor Dostojevski, Mihhail Bulgakov, Edgar Allan Poe)

Contribuições da psiquiatria clássica ao diagnóstico da melancolia: o delírio de negação e o delírio de indignidade

Directory of Open Access Journals (Sweden)

Maria de Fátima Ferreira

2008-09-01

Full Text Available Discute-se a respeito da importância que teve a pesquisa empreendida pelos psiquiatras franceses Jules Cotard e Jules Séglas nas primeiras elaborações freudianas acerca da melancolia. No esforço feito por Freud em distinguir as afecções psíquicas, ele leva em consideração os principais conceitos destacados pela psiquiatria clássica: a dor moral, condição para o delírio de indignidade, o mecanismo de auto-acusação e a hemorragia de libido. Busca-se uma articulação entre esses autores. Neste artigo essa retomada é importante para um aprimoramento no diagnóstico da melancolia. Constata-se que a melancolia na contemporaneidade nos remete não somente aos clássicos, mas sobretudo a Freud, em seus primeiros rascunhos.

Impact of land cover changes on the South African climate

International Nuclear Information System (INIS)

Ngwana, T I; Demory, M-E; Vidale, P L; Plant, R S; Mbedzi, M P

2010-01-01

The Joint UK Land Environmental Simulator (JULES) was run offline to investigate the sensitivity of land surface type changes over South Africa. Sensitivity tests were made in idealised experiments where the actual land surface cover is replaced by a single homogeneous surface type. The vegetation surface types on which some of the experiments were made are static. Experimental tests were evaluated against the control. The model results show among others that the change of the surface cover results in changes of other variables such as soil moisture, albedo, net radiation and etc. These changes are also visible in the spin up process. The model shows different surfaces spinning up at different cycles. Because JULES is the land surface model of Unified Model, the results could be more physically meaningful if it is coupled to the Unified Model.

Dimensional Measurements under High Radiation with Optical Fibre Sensors based on White Light Interferometry - Report on Irradiation Tests

International Nuclear Information System (INIS)

Cheymol, G.; Caron, N.; Gusarov, A.; Gaillot, S.; Destouches, C.

2013-06-01

interferometer. The fibre and signal conditioner are the same as used with the Fabry Perot extensometer. The sensor is expected to be applied for the measurement of variations in the diameter of the fuel cladding during exposure in a research reactor. Three sensors arranged on a circle, within 120 deg. from each other, must measure displacements of the external surface of the cladding with an error lower than 10 μm, over a 0.5 mm range. The irradiation device considered is in development for the Jules Horowitz Reactor (RJH) under construction in Cadarache (France). We have developed and tested up to 400 deg. C the optical module which will be inserted in the mechanical part comprising the mechanical probe. With a bit larger room available, we also develop a device capable of measuring displacement, under high nuclear flux in the vicinity of the core of Sodium Fast Reactor. The objective could be to sense more or less directly the deformation of the core support structure and core movement. The uncertainty expected is near 1 μm with a range of more than 10 mm. (authors)

Hard Hearts and Open Minds? Governance, Identity, and Counterinsurgency Strategy

Science.gov (United States)

2008-05-01

be denied. Ethnic identities are 68 Horowitz, pp. 55, 66. 69 Amartya Sen , Identity and Violence...historically a characteristic of the Chinese community. Sun Yat Sen quipped that they were politically “like a plate of loose sand.”12 One of Britain’s High

The Efficacy of Interpersonal Psychotherapy-Adolescent Skill Training (IPT-AST) in Preventing Depression: A Mixed Methods Approach

Science.gov (United States)

Kerner, Sarah Shankman

2015-01-01

Adolescent depression is a prevalent and debilitating disorder that is associated with social and academic impairment, suicidality, comorbid psychiatric disorders, and high-risk behaviors (Horowitz, Garber, Ciesla, Young, & Mufson, 2007). Yet many adolescents experiencing depressive symptoms do not receive adequate services, and those that do…

Defect-induced room temperature ferromagnetic properties of the Al-doped and undoped ZnO rod-like nanostructure

CSIR Research Space (South Africa)

Jule, L

2017-07-01

Full Text Available : 151-155 Defect-induced room temperature ferromagnetic properties of the Al-doped and undoped ZnO rod-like nanostructure Jule L Dejene F Ali AG Roro KT Mwakikunga BW ABSTRACT: In this work, electron paramagnetic resonance (EPR...

Journal of Astrophysics and Astronomy | Indian Academy of Sciences

Indian Academy of Sciences (India)

Faculty of Humanities and Social Sciences, University of Rijeka, 51000 Rijeka, Croatia. Astronomical Observatory, Volgina 7, 11060 Belgrade, Serbia. LERMA, Observatoire de Paris, PSL Research University, CNRS, Sorbonne Universities, UPMC Univ. Paris 06, 5 Place Jules Janssen, 92195 Meudon Cedex, France.

1286-IJBCS-Article-André Jules Ibouda

African Journals Online (AJOL)

hp

La coagulation du lait par la présure est influencée par plusieurs facteurs parmi lesquels on cite la concentration en enzyme ..... 1987) Enfin certains microorganismes sont capables ... phases principales (Payen, 1976; Visser, 1981;. Green et ...

Chronophotography: engineer of life: Etienne-Jules Marey

Directory of Open Access Journals (Sweden)

Stojmenović Dragan

2016-01-01

Full Text Available The centre of the problem of understanding the process of movement control, incorporated in cognitive biomechanics, is theoretically determined by contemporary physiological and psychological studies, reflecting itself inevitably in cinematography. In this sense, hypothetical questions are imposed: What are the determinants of the relationship between the scientific study of the phenomenon of movement and film art? How to develop an analytical model of the body in motion diagram? What impact does a rapid movement in nature have on the development of cinematic expression? The analysis of locomotion, as a form of human biomechanical movement, leads to the construction of the necessary tool - the camera, implying the creation of scientific films, thereby raising the level of knowledge and observation of the phenomena of motion, transforming it into a contemporary aesthetical model of film art.

Land-use change may exacerbate climate change impacts on water resources in the Ganges basin

Science.gov (United States)

Tsarouchi, Gina; Buytaert, Wouter

2018-02-01

Quantifying how land-use change and climate change affect water resources is a challenge in hydrological science. This work aims to quantify how future projections of land-use and climate change might affect the hydrological response of the Upper Ganges river basin in northern India, which experiences monsoon flooding almost every year. Three different sets of modelling experiments were run using the Joint UK Land Environment Simulator (JULES) land surface model (LSM) and covering the period 2000-2035: in the first set, only climate change is taken into account, and JULES was driven by the CMIP5 (Coupled Model Intercomparison Project Phase 5) outputs of 21 models, under two representative concentration pathways (RCP4.5 and RCP8.5), whilst land use was held fixed at the year 2010. In the second set, only land-use change is taken into account, and JULES was driven by a time series of 15 future land-use pathways, based on Landsat satellite imagery and the Markov chain simulation, whilst the meteorological boundary conditions were held fixed at years 2000-2005. In the third set, both climate change and land-use change were taken into consideration, as the CMIP5 model outputs were used in conjunction with the 15 future land-use pathways to force JULES. Variations in hydrological variables (stream flow, evapotranspiration and soil moisture) are calculated during the simulation period. Significant changes in the near-future (years 2030-2035) hydrologic fluxes arise under future land-cover and climate change scenarios pointing towards a severe increase in high extremes of flow: the multi-model mean of the 95th percentile of streamflow (Q5) is projected to increase by 63 % under the combined land-use and climate change high emissions scenario (RCP8.5). The changes in all examined hydrological components are greater in the combined land-use and climate change experiment. Results are further presented in a water resources context, aiming to address potential implications of

Temperature and Oxidative Stress as Triggers for Virulence Gene Expression in Pathogenic Leptospira spp.

Directory of Open Access Journals (Sweden)

Tricia Fraser

2017-05-01

Full Text Available Leptospirosis is a zooanthroponosis aetiologically caused by pathogenic bacteria belonging to the genus, Leptospira. Environmental signals such as increases in temperatures or oxidative stress can trigger response regulatory modes of virulence genes during infection. This study sought to determine the effect of temperature and oxidative stress on virulence associated genes in highly passaged Leptospira borgpeterseneii Jules and L. interrogans Portlandvere. Bacteria were grown in EMJH at 30°C, 37°C, or at 30°C before being transferred to 37°C. A total of 14 virulence-associated genes (fliY, invA, lenA, ligB, lipL32, lipL36, lipL41, lipL45, loa22, lsa21, mce, ompL1, sph2, and tlyC were assessed using endpoint PCR. Transcriptional analyses of lenA, lipL32, lipL41, loa22, sph2 were assessed by quantitative real-time RT-PCR at the temperature conditions. To assess oxidative stress, bacteria were exposed to H2O2 for 30 and 60 min with or without the temperature stress. All genes except ligB (for Portlandvere and ligB and mce (for Jules were detectable in the strains. Quantitatively, temperature stress resulted in significant changes in gene expression within species or between species. Temperature changes were more influential in gene expression for Jules, particularly at 30°C and upshift conditions; at 37°C, expression levels were higher for Portlandvere. However, compared to Jules, where temperature was influential in two of five genes, temperature was an essential element in four of five genes in Portlandvere exposed to oxidative stress. At both low and high oxidative stress levels, the interplay between genetic predisposition (larger genome size and temperature was biased towards Portlandvere particularly at 30°C and upshift conditions. While it is clear that expression of many virulence genes in highly passaged strains of Leptospira are attenuated or lost, genetic predisposition, changes in growth temperature and/or oxidative intensity and

The Value of Modern Decision-Making Support Services to Fusion Projects

International Nuclear Information System (INIS)

Pascal, C.

2006-01-01

facilities (JHR Jules Horowitz experimental Reactor, Laser Megajoule plant, dedicated to simulation) and in rightly different domains, such as airplane construction (Airbus A380 final assembly line). The full paper and the associated presentation will focus on decision making support services in the following domains: risks management, performances management, interfaces ( as well physical as functional interfaces) and integration management. The contribution of CAD and TDMS ( technical data management system) will be discussed. (author)

Non-linear microscopy and its applications for the study of the structure and dynamics of biological systems

CSIR Research Space (South Africa)

Sparrow, RW

2008-01-01

Full Text Available be differentiated (Clay et al. 2006). 6 References BARAD, Y., EISENBERG, H., HOROWITZ, M. And SILBERBERG, Y. “Nonlinear scanning laser microscopy by thrid harmonic generation“ Appl Phys Lett vol.70 (8) p.922 – 924, 1997 BARILLE,R., CANIONI,L., RIVET,S...

Second order phase transition in thermodynamic geometry and holographic superconductivity in low-energy stringy black holes

Science.gov (United States)

Rizwan, C. L. Ahmed; Vaid, Deepak

2018-05-01

We study holographic superconductivity in low-energy stringy Garfinkle-Horowitz-Strominger (GHS) dilaton black hole background. We finds that superconducting properties are much similar to s-wave superconductors. We show that the second-order phase transition indicated from thermodynamic geometry is not different from superconducting phase transition.

Soldier Capability - Army Combat Effectiveness (SCACE). Volume 2. Selected Bibliography

Science.gov (United States)

1981-02-01

and Horowitz, Dan. The Israeli Army. London: Allen Lane, 1975. 346. Machiavelli , Niccolo. The Discourses. In The Prince and the Dis- courses. New York...5. 1967. Fort Worth, TX: Institute of Behavioral Research, Texas Christian University, July 1958. 46 AL - - ---- ISE 490. Sells, S. B., and Rawls , J

CTC Sentinel. Volume 3, Issue 8, August 2010. Evaluating the Al-Qaida Threat to the U.S. Homeland

Science.gov (United States)

2010-08-01

ideological food chain.13 10 For details, see Juliana Menasce Horowitz, “Declining Support for bin Laden and Suicide Bombing,” Pew Re- search Center...such as the smuggling of halal meat from Sweden, the purchase of illegal travel documents, and misappropriation of company funds.27 They may also

THE MORPHOLOGICAL BASIS FOR OLFACTORY PERCEPTION OF STEROIDS DUING AGONISTIC BEHAVIOR IN LOBSTER: PRELIMINARY EXPERIMENTS

Science.gov (United States)

The morphological basis for olfactory perception of steroids during agonistic behavior in lobsters: preliminary experiments. Borsay Horowitz, DJ1, Kass-Simon, G2, Coglianese, D2, Martin, L2, Boseman, M2, Cromarty, S3, Randall, K3, Fini, A.3 1US EPA, NHEERL, ORD, Atlantic Ecology...

Fulltext PDF

Indian Academy of Sciences (India)

1Faculty of Humanities and Social Sciences, University of Rijeka, 51000 Rijeka, Croatia. 2Astronomical Observatory, Volgina 7, 11060 Belgrade, Serbia. 3LERMA, Observatoire de Paris, PSL Research University, CNRS, Sorbonne Universities,. UPMC Univ. Paris 06, 5 Place Jules Janssen, 92195 Meudon Cedex, France.

Speeches and Presentations on Day 1: Opening and Introductory ...

International Development Research Centre (IDRC) Digital Library (Canada)

4 nov. 2010 ... Pr. Dieudonné OUEDRAOGO, Director of ISSP Centre d'Excellence de l'UEMOA and Regional Coordinator of PARSEP;; M. Lauchlan MUNRO, Vice-president, Corporate Strategy and Regional Management, IDRC ;; M. Jules SAVARIA, Ambassador to the Embassy of Canada in Ouagadougou (Burkina ...

Fentes labiopalatines dans la province du Katanga en République ...

African Journals Online (AJOL)

Fentes labiopalatines dans la province du Katanga en République Démocratique du Congo: Aspects épidémiologiques, anatomocliniques et thérapeutiques. Cedrick Milindi Sangwa, Olivier Mukuku, Christian Tshisuz, Jules Mulefu Panda, Mireille Kakinga, Marius Feruzi Kitembo, Jean-Felix Mutomb, Bwana Fwamba ...

Amputation des quatre members | Feruzi | Pan African Medical Journal

African Journals Online (AJOL)

, Mireille Kakinga Zabibu, Jules Panda Mulefu, Francois Tshilombo Katombe. Abstract. Les auteurs présentent les cas d'amputation des quatre membres réalisée chez trois patients différents. Ce sont des amputations réalisées pour chaque ...

Development of Fusion Nuclear Technologies and the role of MTR's

International Nuclear Information System (INIS)

Laan, J.G. van der; Schaaf, B. van der

2006-01-01

design for the EU ITER Test Blanket Module. The duration of the irradiation is relevant for the total TBM operation during the ITER lifetime. The major result is that the basic design soundness has been demonstrated under ITER relevant conditions. Besides the ceramic breeder concept experiments with lithium lead breeder sub components are continued to measure the effects of transmutation product helium on the liquid metal properties. Similarly, activities are ongoing to perform in-pile testing of primary wall components, allowing to address fatigue type loading conditions. In the next decade 14 MeV sources such as ITER, IFMIF and maybe a volumetric source will support the crucial demonstration of components under near fusion plasma nuclear conditions. These sources have limitations in accumulated total damage (ITER) irradiation volume (IFMIF) and control. MTR's will thus continue to supply essential facts on component behaviour and materials in parallel to 14 MeV sources. The present generation of MTR's will be closed in this and next decade because they reach their end of life. The new generation will be utilised for 4 major areas of nuclear interest: energy, science, health and environmental issues. Fusion and the next generation fission (Generation 4) power plant development will share the areas energy and science in the next decades. The design and concept of the new MTR's will centre on faster development cycles, thus higher fluxes up to 5 x 10 18 nm -2 . Several MTR replacements in the EU are in different design stages such as the Reacteur Jules Horowitz in France and PALLAS in the Netherlands. The conceptual design of the replacement for the HFR, Petten, named PALLAS envisages a fruitful co-operation of the experimenters for advanced fission power reactor and fusion plant components. Materials science will also be able to use modern MTR facilities for the modelling of radiation damage in both fission and fusion environments. The development of primary fusion

Carbon stocks and fluxes in the high latitudes: using site-levelbreak data to evaluate Earth system models

DEFF Research Database (Denmark)

Chadburn, S. E.; Krinner, G.; Porada, P.

2017-01-01

from northward expansion of vegetation under climate warming. Here we evaluate the simulation of tundra carbon stocks and fluxes in three land surface schemes that each form part of major Earth system models (JSBACH, Germany; JULES, UK; ORCHIDEE, France). We use a site-level approach in which...

Journal of Astrophysics and Astronomy | Indian Academy of Sciences

Indian Academy of Sciences (India)

2016-01-27

Jan 27, 2016 ... Department of Physics and Astronomy, College of Science, King Saud University, P. O. Box 2455, Riyadh 11451, Saudi Arabia. LERMA, Observatoire de Paris, PSL Research University, CNRS, Sorbonne Universités, UPMC Univ. Paris 06, 5 Place Jules Janssen, 92195 Meudon Cedex, France.

"Sugar" jõuab lavale / Ülle Hallik

Index Scriptorium Estoniae

Hallik, Ülle, 1963-

2008-01-01

Vanemuises esietendub 5. juunil "Sugar", lavastaja Mare Tommingas. Muusikal põhineb Jule Styne muusikalil "Sugar ehk Dzhässis ainult tüdrukud". Muusikali libreto kirjutas Peter Stone Robert Thoereni jutustuse ning Billy Wilderi ja I. A. L. Dimanondi filmi "Some Like It Hot" põhjal

Solid-state reaction kinetics and optical studies of cadmium doped magnesium hydrogen phosphate crystals

Science.gov (United States)

Verma, Madhu; Gupta, Rashmi; Singh, Harjinder; Bamzai, K. K.

2018-04-01

The growth of cadmium doped magnesium hydrogen phosphate was successfully carried out by using room temperature solution technique i.e., gel encapsulation technique. Grown crystals were confirmed by single crystal X-ray diffraction (XRD). The structure of the grown crystal belongs to orthorhombic crystal system and crystallizes in centrosymmetric space group. Kinetics of the decomposition of the grown crystals were studied by non-isothermal analysis. Thermo gravimetric / differential thermo analytical (TG/DTA) studies revealed that the grown crystal is stable upto 119 °C. The various steps involved in the thermal decomposition of the material have been analysed using Horowitz-Metzger, Coats-Redfern and Piloyan-Novikova equations for evaluating various kinetic parameters. The optical studies shows that the grown crystals possess wide transmittance in the visible region and significant optical band gap of 5.5ev with cut off wavelength of 260 nm.

Dismantling of nuclear facilities and related problems - Conference proceedings

International Nuclear Information System (INIS)

Tournebize, Frederic; Bordet, Didier; Charlety, Philippe; Gore, Thierry; Estrade, Jerome; Lemaire, Hermine; Ginet, Annick; Fabrier, Lionel; Evrard, Lydie; Furois, Timothee; Butez, Marc; Dutzer, Michel; Faure, Vincent; Billarand, Yann; Menuet, Lise; Lahaye, Thierry; Pin, Alain; Mougnard, Philippe; Charavy, Sylvain; Poncet, Philippe; Moggia, Fabrice; Dochy, Arnaud; Benjamin, Patrick; Poncet, Pierre-Emmanuel; Beneteau, Yannick; Richard, Jean-Baptiste; Pellenz, Gilles; Ollivier Dehaye, Catherine; Gerard, Stephane; Denissen, Luc; Davain, Henri; Duveau, Florent; Guyot, Jean-Luc; Ardellier, Luc

2012-11-01

facilitating the definitive shutdown of the Jules Horowitz reactor (J. Estrade); 17 - Integration of dismantling at the design stage of the French EPR reactor (Y. Beneteau, J.P. Richard); 18 - Use of the Gampix gamma camera at dismantling sites (H. Lemaire); 19 - Stakes for the wastes intended to be disposed off in waste centres in operation (F. Dutzer); 20 - Cleansing of non-nuclear contaminated sites (V. Faure); 21 - Rehabilitation of dismantling sites - management plan for the old effluents channel of the Brennilis effluents processing plant (G. Pellenz, C. Ollivier-Dehaye); 22 - Problem of confinement keeping during deconstruction (A. Ginet, L. Fabrier); 23 - Project of wells cleansing at the irradiated materials workshop (AMI) of Chinon NPP (F. Duveau); 24 - Nuclear decontamination using a laser (F. Moggia); 25 - TIVA, adaptable and ventilated intervention dress (A. Dochy, P. Benjamin); 26 - Dismantling project - optimisation thanks to virtual reality-based software solutions (L. Ardellier, A. Pin)

Classical gauge theories on the coadjoint orbits of infinite dimensional groups

International Nuclear Information System (INIS)

Grabowski, M.P.; Virginia Polytechnic Inst. and State Univ., Blacksburg; Tze Chiahsiung

1991-01-01

We reformulate several classical gauge theories on the coadjoint orbits of the semidirect product of the gauge group and the Weyl group. The construction is given for the Yang-Mills theories in arbitrary spacetime dimension d, Chern-Simons topological theory (d=3) and higher dimensional topological models of Horowitz (d≥4). (orig.)

Two Sides of the Same Coin: Politics in the Classroom

Science.gov (United States)

Berg, Steven L.

2005-01-01

This paper presents interviews with David Horowitz, an author, professor, and President of the Center for the Study of Popular Culture headquartered in Los Angeles, California and Carol King, an adjunct professor of theology at Xavier University in Cincinnati, Ohio, and manager of the Cinergy Foundation, also in Cincinnati. The interviews present…

Disabled-2 Mediation of Retinoic Acid Cell Growth Arrest Signal in Breast Cancer

Science.gov (United States)

2002-08-01

C. Cohen, L. E. Mendez , I. R. Horowitz, ylthiazol-2-yl)-2,5-diphenyltetrazolium bromide. A. I Godwin, and X X. Xu, submitted for publication. T...trans., 9-cis-retinoic acid) and P- caro - forming units of adenovirus were added to the cells in medium with low tene were purchased from Sigma

Decomposition of Some Well-Known Variance Reduction Techniques. Revision.

Science.gov (United States)

1985-05-01

34use a family of transformatlom to convert given samples into samples conditioned on a given characteristic (p. 04)." Dub and Horowitz (1979), Granovsky ...34Antithetic Varlates Revisited," Commun. ACM 26, 11, 064-971. Granovsky , B.L. (1981), "Optimal Formulae of the Conditional Monte Carlo," SIAM J. Alg

Le dévéloppement à l'ombre de la violence: un programme de ...

International Development Research Centre (IDRC) Digital Library (Canada)

ebishop

Une logique similaire s'applique aux facteurs politiques ou de justice. .... Si la discrimination politique ou ethnique a motivé les violences, .... 28 Simonsen 2005 ; Samuels et von Einsiedel 2004 ; Horowitz 1985 ; d'un avis contraire, Lopez-Pintor 2006. ...... confiance dans les institutions, les perceptions de la légitimité, etc.

Combining Performance and Flexibility for RMS with a Hybrid Architecture

NARCIS (Netherlands)

Dennis Koole; Arjan Groenewegen; Daniël Telgen; Patrick Wit; Leo van Moergestel; Arjan van Zanten; John-Jules Meyer; Ing. Erik Puik; Dick van der Steen; Pascal Muller

2013-01-01

Author supplied Combining Performance and Flexibility for RMS with a Hybrid Architecture Dani¨el Telgen 12? , Leo van Moergestel 1 , Erik Puik 1 , Pascal Muller 1 , Arjan Groenewegen 1 , Dick van der Steen 1 , Dennis Koole 1 , Patrick de Wit 1 , Arjen van Zanten 1 , and John-Jules

Browse Title Index

African Journals Online (AJOL)

Items 101 - 150 of 3061 ... Maruis Kitembo Feruzi, Cédrick Sangwa Milindi, Mireille Kakinga Zabibu, Jules Panda Mulefu, Francois Tshilombo Katombe. Vol 24, No 1 (2016), Amyloïdosis, sarcoidosis and systemic lupus erythematosus, Abstract PDF. Amel Rezgui, Imene Ben Hassine, Monia Karmani, Fatma Ben Fredj, Chadia ...

Impasse at the MLA

Science.gov (United States)

McMillen, Liz

2009-01-01

At the annual gathering of the Modern Language Association (MLA), panel members seemed to talk past each other. Mark Bauerlein and David Horowitz each criticized the professoriate for not acknowledging real problems in the classroom or the ways identity politics can infringe on academic freedom. Norma V. Canti and Cary Nelson did not respond to…

59 forskellige kronikker, klummer mv. med hver deres titel i Berlingske, JP og Kristeligt Dagblad

DEFF Research Database (Denmark)

Sørensen, Lars Hovbakke

2017-01-01

og julemiddagen Den 16. december: Julens sange Den 17. december: Julebukken Den 18. december: ”Rudolf med den røde tud” Den 19. december: Kravlenisserne Den 20. december: Glöggen og juleøllet Den 21. december: Adventsstjernen Den 22. december: Julemarkedet Den 23. december: Walt Disneys juleshow Den...

Right of withdrawal - interoperability of directives

NARCIS (Netherlands)

Loos, M.B.M.; Terryn, E.; Straetmans, G.; Colaert, V.

2013-01-01

This paper is published in the liber amicorum for Jules Stuyck (Leuven). This liber amicorum consists of case notes to landmark cases of the CJEU. The Travel Vac case, which is relatively unknown, stands at the crossroads of unfair commercial practices and consumer contract law, just as the work of

Dictionary materials engineering, materials testing

International Nuclear Information System (INIS)

1994-01-01

This dictionary contains about 9,500 entries in each part of the following fields: 1) Materials using and selection; 2) Mechanical engineering materials -Metallic materials - Non-metallic inorganic materials - Plastics - Composites -Materials damage and protection; 3) Electrical and electronics materials -Conductor materials - Semiconductors - magnetic materials - Dielectric materials - non-conducting materials; 4) Materials testing - Mechanical methods - Analytical methods - Structure investigation - Complex methods - Measurement of physical properties - Non-destructive testing. (orig.) [de

Geopolymer resin materials, geopolymer materials, and materials produced thereby

Energy Technology Data Exchange (ETDEWEB)

Seo, Dong-Kyun; Medpelli, Dinesh; Ladd, Danielle; Mesgar, Milad

2018-01-09

A product formed from a first material including a geopolymer resin material, a geopolymer material, or a combination thereof by contacting the first material with a fluid and removing at least some of the fluid to yield a product. The first material may be formed by heating and/or aging an initial geopolymer resin material to yield the first material before contacting the first material with the fluid. In some cases, contacting the first material with the fluid breaks up or disintegrates the first material (e.g., in response to contact with the fluid and in the absence of external mechanical stress), thereby forming particles having an external dimension in a range between 1 nm and 2 cm.

Journal of Chemical Sciences | Indian Academy of Sciences

Indian Academy of Sciences (India)

... University of Caen, 6 bd Ml Juin, 14050 Caen, France; Laboratoire de Physique des Systèmes Complexes, Université Picardie Jules Verne, 33 rue St Leu, 80039 Amiens Cedex, France; Centre Wallon de Recherche Agronomique, CRA-W, Bâtiment Maurice Henseval, Chaussée de Namur, 24, 50030 Gembloux, Belgium ...

Geopolymer resin materials, geopolymer materials, and materials produced thereby

Science.gov (United States)

Seo, Dong-Kyun; Medpelli, Dinesh; Ladd, Danielle; Mesgar, Milad

2016-03-29

A product formed from a first material including a geopolymer resin material, a geopolymer resin, or a combination thereof by contacting the first material with a fluid and removing at least some of the fluid to yield a product. The first material may be formed by heating and/or aging an initial geopolymer resin material to yield the first material before contacting the first material with the fluid. In some cases, contacting the first material with the fluid breaks up or disintegrates the first material (e.g., in response to contact with the fluid and in the absence of external mechanical stress), thereby forming particles having an external dimension in a range between 1 nm and 2 cm.

SUPPLEMENTARY INFORMATION REGULAR ARTICLE Synthesis ...

Indian Academy of Sciences (India)

wafa_info

e LCMT, ENSICAEN, UMR 6507 CNRS, University of Caen, 6 bd Ml Juin, 14050 Caen, France. f Laboratoire de Physique des Systèmes Complexes, Université Picardie Jules Verne, 33 rue St Leu, 80039 Amiens cedex, France. g Centre Wallon de Recherche Agronomique, CRA-W, Bâtiment Maurice Henseval, Chaussée ...

Numerical study of cosmic censorship in string theory

International Nuclear Information System (INIS)

Gutperle, Michael; Kraus, Per

2004-01-01

Recently Hertog, Horowitz, and Maeda have argued that cosmic censorship can be generically violated in string theory in anti-de Sitter spacetime by considering a collapsing bubble of a scalar field whose mass saturates the Breitenlohner-Freedman bound. We study this system numerically, and find that black holes form rather than naked singularities, implying that cosmic censorship is upheld. (author)

Numerical study of cosmic censorship in string theory

Energy Technology Data Exchange (ETDEWEB)

Gutperle, Michael E-mail: gutperle@physics.ucla.edu; Kraus, Per

2004-04-01

Recently Hertog, Horowitz, and Maeda have argued that cosmic censorship can be generically violated in string theory in anti-de Sitter spacetime by considering a collapsing bubble of a scalar field whose mass saturates the Breitenlohner-Freedman bound. We study this system numerically, and find that black holes form rather than naked singularities, implying that cosmic censorship is upheld. (author)

Reach for the Stars: Visions for Literacy Coaching Programs

Science.gov (United States)

DeFord, Diane

2012-01-01

This brief by the Literacy Coaching Clearinghouse is about reaching for the stars--stories of vision and commitment from educators in small and large schools. Everyone knows of people who are held up as "visionaries" throughout history: Leonardo Da Vinci, Mahatma Gandhi, Jules Verne, Thomas Edison, Susan Anthony, or John Dewey, to name a few. The…

What Is Steampunk, and Do I Want It in My Library?

Science.gov (United States)

Rozmus, Emily

2011-01-01

What is steampunk? Most call it Victorian science fiction. Steampunk can claim such authors as H.G. Wells and Jules Verne as its earliest writers. These two Victorian/Edwardian era writers created steampunk settings in books such as "The Time Machine" and "Journey to the Center of the Earth". In the 1990s, writers such as William Gibson, Bruce…

Numerical Simulation of a Single-Phase Closed-Loop Thermo-Siphon in LORELEI Test Device

International Nuclear Information System (INIS)

Gitelman, D.; Shenha, H.; Gonnier, Ch.; Tarabelli, D.; Sasson, A.; Weiss, Y.; Katz, M.

2014-01-01

The LORELEI experimental setup in the Jules Horowitz Reactor (JHR) is dedicated for the study of fuel during a Loss of Coolant Accident (LOCA). The main objective of the LORELEI(2) (Light-Water One-Rod Equipment for LOCA Experimental Investigation) is to study the thermal-mechanical behavior of fuel during such an accident and to produce a short half-life fission products source term. In order to study those phenomena, the fuel sample will experience a transient neutron flux field, which in turn will generate a Linear Heat Generation Rate (LHGR) and determine the temperature of the fuel and its cladding, simulating the behavior of the fuel and the cladding during a LOCA accident. In order to reproduce a LOCA-type transient sequence, the experimental test device will be located on a displacement device. The displacement device moves the test device in the flux field in order to generate a representing LHGR in the fuel or temperature of its cladding. The LOCA-type transient sequence has four major features: „h An adiabatic heating of the fuel up to the ballooning and burst occurrence. „h High temperature plateau which will promote clad oxidation. „h Passive precooling by thermal inertia. „h Water re-flooding and quenching. The challenge in the thermo-hydraulic design of the LORELEI test section is in defining a one closed water capsule design that can operate as a thermo-siphon at re-irradiation phase and also can reproduce all LOCA-type transient sequence phases. This design should be validated and verified to fill all safety and regulation requirements. This work aims to investigate fluid flow behavior of a single-phase thermo-siphon in the LORELEI test device, as part of the conceptual design and optimization study. The complexity of the flow field in the LORELEI test device, as a closed-loop thermo-siphon, is due to the opposing forces in the device - buoyancy forces and natural convection flow generated (mainly) by the fuel power in the hot channel

Study of the effect of PH, surface finish and thermal treatment on the corrosion of AlFeNi aluminum alloy

International Nuclear Information System (INIS)

Nabhan, Diana

2013-01-01

The Jules Horowitz Reactor (JHR) is a research reactor under construction at the CEA Cadarache research center, France. It is scheduled to start operating by 2020. The fuel elements of this reactor core consist of eight concentric rows of cylindrical plates, each row being composed of three thin aluminum coated plates. Cooling water circulates between these plates through very thin gaps smaller than 2 mm. The aluminum alloy used to coat the fuel plates is an alloy called AlFeNi, which contains 1% wt. Fe, 1% wt. Ni and 1% wt. Mg. In the reactor environment, this alloy may undergo corrosion. The oxide layer formed on the AlFeNi alloy is composed of two different types of oxides: an inner oxide layer formed by a diffusion mechanism and an outer oxide layer formed by re-precipitation. As a consequence, formation of an oxide scale on the aluminum coating could reduce the gap between the cladding plates, thus allowing less water to circulate. This could in turn lead to local heating of the fuel cladding. In addition, the metal consumption and the softening of the metal at high temperatures can lead to a decrease of the mechanical strength of the cladding. In order to qualify the fuel elements of the JHR, several specimens of AlFeNi, representative of the future cladding, were corroded at 250 .deg. C for different durations (9 to 34 days) in distilled water of different pH: 4.9; 5.2 and 5.6. These pH values have been chosen to simulate the ones currently predicted for the JHR. The effect of surface finish (polished and not polished) and thermal treatment (annealed and not annealed) on the oxide growth rate was also investigated. For long tests over 30 days, the pH 5,6 appears to be more favorable than the pH 5,2 and 4,9 to limit the oxide thickness, but this pH effect is reduced on unpolished samples. In one hand, the effect of surface finish on the corrosion behavior as measured by optical microscopy appears to be strong. On the other hand, the effect of thermal

Study of the effect of PH, surface finish and thermal treatment on the corrosion of AlFeNi aluminum alloy

Energy Technology Data Exchange (ETDEWEB)

Nabhan, Diana [Comissariat a l' Energie Atomique, Paris (France)

2013-07-01

The Jules Horowitz Reactor (JHR) is a research reactor under construction at the CEA Cadarache research center, France. It is scheduled to start operating by 2020. The fuel elements of this reactor core consist of eight concentric rows of cylindrical plates, each row being composed of three thin aluminum coated plates. Cooling water circulates between these plates through very thin gaps smaller than 2 mm. The aluminum alloy used to coat the fuel plates is an alloy called AlFeNi, which contains 1% wt. Fe, 1% wt. Ni and 1% wt. Mg. In the reactor environment, this alloy may undergo corrosion. The oxide layer formed on the AlFeNi alloy is composed of two different types of oxides: an inner oxide layer formed by a diffusion mechanism and an outer oxide layer formed by re-precipitation. As a consequence, formation of an oxide scale on the aluminum coating could reduce the gap between the cladding plates, thus allowing less water to circulate. This could in turn lead to local heating of the fuel cladding. In addition, the metal consumption and the softening of the metal at high temperatures can lead to a decrease of the mechanical strength of the cladding. In order to qualify the fuel elements of the JHR, several specimens of AlFeNi, representative of the future cladding, were corroded at 250 .deg. C for different durations (9 to 34 days) in distilled water of different pH: 4.9; 5.2 and 5.6. These pH values have been chosen to simulate the ones currently predicted for the JHR. The effect of surface finish (polished and not polished) and thermal treatment (annealed and not annealed) on the oxide growth rate was also investigated. For long tests over 30 days, the pH 5,6 appears to be more favorable than the pH 5,2 and 4,9 to limit the oxide thickness, but this pH effect is reduced on unpolished samples. In one hand, the effect of surface finish on the corrosion behavior as measured by optical microscopy appears to be strong. On the other hand, the effect of thermal

Modeling visual search using three-parameter probability functions in a hierarchical Bayesian framework.

Science.gov (United States)

Lin, Yi-Shin; Heinke, Dietmar; Humphreys, Glyn W

2015-04-01

In this study, we applied Bayesian-based distributional analyses to examine the shapes of response time (RT) distributions in three visual search paradigms, which varied in task difficulty. In further analyses we investigated two common observations in visual search-the effects of display size and of variations in search efficiency across different task conditions-following a design that had been used in previous studies (Palmer, Horowitz, Torralba, & Wolfe, Journal of Experimental Psychology: Human Perception and Performance, 37, 58-71, 2011; Wolfe, Palmer, & Horowitz, Vision Research, 50, 1304-1311, 2010) in which parameters of the response distributions were measured. Our study showed that the distributional parameters in an experimental condition can be reliably estimated by moderate sample sizes when Monte Carlo simulation techniques are applied. More importantly, by analyzing trial RTs, we were able to extract paradigm-dependent shape changes in the RT distributions that could be accounted for by using the EZ2 diffusion model. The study showed that Bayesian-based RT distribution analyses can provide an important means to investigate the underlying cognitive processes in search, including stimulus grouping and the bottom-up guidance of attention.

Aerospace materials and material technologies

CERN Document Server

Wanhill, R

2017-01-01

This book is a comprehensive compilation of chapters on materials (both established and evolving) and material technologies that are important for aerospace systems. It considers aerospace materials in three Parts. Part I covers Metallic Materials (Mg, Al, Al-Li, Ti, aero steels, Ni, intermetallics, bronzes and Nb alloys); Part II deals with Composites (GLARE, PMCs, CMCs and Carbon based CMCs); and Part III considers Special Materials. This compilation has ensured that no important aerospace material system is ignored. Emphasis is laid in each chapter on the underlying scientific principles as well as basic and fundamental mechanisms leading to processing, characterization, property evaluation and applications. A considerable amount of materials data is compiled and presented in appendices at the end of the book. This book will be useful to students, researchers and professionals working in the domain of aerospace materials.

Chemical reaction engineering studies on cocracking of petroleum vacuum residue with coal, plastics, and biomass (bagasse and petrocrop)

Energy Technology Data Exchange (ETDEWEB)

Ahmaruzzaman, M.; Sharma, D.K. [Indian Institute of Technology, New Delhi (India). Centre for Energy Studies

2007-07-01

This article deals with the studies on cocracking of petroleum vacuum residue (XVR) with thermosetting plastic, I. e., bakelite (BL), Samla coal (SC), biomass, I. e., bagasse (BG) or C. procera (CL) and their binary, ternary, and quaternary mixtures in a thermogravimetric analyzer (TGA). The kinetic studies were performed using the Coats and Redfern kinetic modeling equation. The overall activation energies obtained were 25 kJ/mole for petroleum vacuum residue, 99 kJ/mole for polypropylene, 21 kJ/mole for coal, 23 kJ/mole for Calotropis procera, and 25 kJ/mole for the combination of these four materials. However, other models, such as van Krevelan et al. and Horowitz and Metzger have also been used in some cases to compare the results with those obtained by the Coats and Redfern kinetic models. In the present work, the effect of catalysts on the cracking of Basra vacuum residue (BVR) has also been reported.

Spectral and Thermal Degradation of Melamine Cyanurate

Directory of Open Access Journals (Sweden)

V. Sangeetha

2013-01-01

Full Text Available Melamine cyanurate, an organic crystalline complex was, synthesized by evaporation of an aqueous solution containing equimolar quantities of melamine and cyanuric acid. The synthesized compound has been subjected to various characterizations like Powder XRD, FT-IR, TG-DTG, SEM, and SHG. The presence of sharp diffraction peaks in the XRD confirms that the products are highly crystalline. The average particle size was calculated using the Debye-Scherrer formula, and it was found to be 3.067 μm. Thermal behavior of the grown crystal has been studied by TG-DTG analysis. From TG-DTG, it is found that the title crystal possesses good thermal stability. The activation energy was calculated using the Broido, Coats-Redfern, and Horowitz-Metzger methods. A sharp peak exothermic peak at 405.40°C was assigned as the melting point of the title material. SEM reveals the morphology of the synthesized salt. No detectable signal was observed during the Kurtz-Perry technique.

Reset Control Systems

CERN Document Server

Baños, Alfonso

2012-01-01

Reset Control Systems addresses the analysis for reset control treating both its basic form which requires only that the state of the controller be reinitialized to zero (the reset action) each time the tracking error crosses zero (the reset condition), and some useful variations of the reset action (partial reset with fixed or variable reset percentage) and of the reset condition (fixed or variable reset band and anticipative reset). The issues regarding reset control – concepts and motivation; analysis tools; and the application of design methodologies to real-world examples – are given comprehensive coverage. The text opens with an historical perspective which moves from the seminal work of the Clegg integrator and Horowitz FORE to more recent approaches based on impulsive/hybrid control systems and explains the motivation for reset compensation. Preliminary material dealing with notation, basic definitions and results, and with the definition of the control problem under study is also included. The fo...

Posttraumatic stress disorder in bosnian war veterans: Analysis of stress events and risk factors

Directory of Open Access Journals (Sweden)

Kuljić Blagoje

2004-01-01

Full Text Available The aim of this study was to determine the incidence of Post-Traumatic Stress Disorder (PTSD, the characteristics of stress-related events, and the risk factors for the development of PTSD. The total patient sample consisted of 100 Bosnian war veterans. Watson’s PTSD module was used in establishing PTSD diagnosis. Patients fulfilled the following questionnaires: personal data form, Posttraumatic Symptom Scale PTSS-10 (Holen, Impact of Event Scale (Horowitz, Life Event Scale, and Eysenck Personality Inventory. PTSD was diagnosed in 30% of the examined patients. Larger number of stress-related events, particularly of those regarded as life-threatening, wounding/death of a close person, and material losses were more frequent in persons with PTSD. The risk factors for the development of PTSD in this study were: age (30-40, marital status (married, lower level of education, the front-line combat exposure, neurotic manifestations, family problems in childhood, and neuroticism.

Annual International Meeting on Medical Simulation (5th); Simulating Change Together, Held at the Radisson Miami Florida, on January 13-16, 2005

Science.gov (United States)

2005-02-01

Challenging Superiors in the Healthcare Environment: The Two-Challenge Center for Medical Simulation Rule IMMS Singh Shashank Trauma and Awareness Pen...Rochester * Dallas Rochester MN Rochester NY Dallas TX SMartin Eason MD JD Marc Horowitz MD - Swati Argarwal, MD ETSU University of NM Stanford...Murphy, MD Simluation-based training allows educators in medicine to finally Swati Argarwal, MD address the needs of the adult learner. This high

World Tour

CERN Multimedia

Tauxe,H

H.C.Tauxe est Dr.ès lettres de l'Université de Lausanne et a enseigné la philosophie jusqu'en 1962. Ensuite il s'est tourné vers le journalisme, et dans ce cadre il a fait le voyage, qui sera le thème de sa conférence, en suivant ce qui a écrit Jules Verne.

Material efficiency: providing material services with less material production.

Science.gov (United States)

Allwood, Julian M; Ashby, Michael F; Gutowski, Timothy G; Worrell, Ernst

2013-03-13

Material efficiency, as discussed in this Meeting Issue, entails the pursuit of the technical strategies, business models, consumer preferences and policy instruments that would lead to a substantial reduction in the production of high-volume energy-intensive materials required to deliver human well-being. This paper, which introduces a Discussion Meeting Issue on the topic of material efficiency, aims to give an overview of current thinking on the topic, spanning environmental, engineering, economics, sociology and policy issues. The motivations for material efficiency include reducing energy demand, reducing the emissions and other environmental impacts of industry, and increasing national resource security. There are many technical strategies that might bring it about, and these could mainly be implemented today if preferred by customers or producers. However, current economic structures favour the substitution of material for labour, and consumer preferences for material consumption appear to continue even beyond the point at which increased consumption provides any increase in well-being. Therefore, policy will be required to stimulate material efficiency. A theoretically ideal policy measure, such as a carbon price, would internalize the externality of emissions associated with material production, and thus motivate change directly. However, implementation of such a measure has proved elusive, and instead the adjustment of existing government purchasing policies or existing regulations-- for instance to do with building design, planning or vehicle standards--is likely to have a more immediate effect.

The astronomer Jules Janssen a globetrotter of celestial physics

CERN Document Server

Launay, Françoise

2012-01-01

Every aspect of the personality of Janssen (1824—1907) – that D’Artagnan of science, this bard of the Sun, and this audacious master builder – is covered here by Françoise Launay, his attentive and equally erudite biographer. A physicist, inventor and builder, Janssen was guided by his energy and curiosity. His research followed two directions: on the one hand the atmospheres of the Earth and the Sun, and on the other, two techniques: spectroscopy and photography. Among his numerous voyages across the globe, he went to Japan in 1874 to follow the transit of Venus in front of the Sun, the same year in which he invented his famous photographic revolver, which was, in truth, a great technical success. To observe the Sun during total eclipses he traveled to the Indies in 1868, to Oran in 1870 (escaping from besieged Paris by balloon!), returned to India in 1871, left for Siam in 1875 and, in 1883, for an island in the Pacific. One can thus understand why Henriette often complained of the solitude in whic...

Commentary: The Materials Project: A materials genome approach to accelerating materials innovation

Directory of Open Access Journals (Sweden)

Anubhav Jain

2013-07-01

Full Text Available Accelerating the discovery of advanced materials is essential for human welfare and sustainable, clean energy. In this paper, we introduce the Materials Project (www.materialsproject.org, a core program of the Materials Genome Initiative that uses high-throughput computing to uncover the properties of all known inorganic materials. This open dataset can be accessed through multiple channels for both interactive exploration and data mining. The Materials Project also seeks to create open-source platforms for developing robust, sophisticated materials analyses. Future efforts will enable users to perform ‘‘rapid-prototyping’’ of new materials in silico, and provide researchers with new avenues for cost-effective, data-driven materials design.

Computational Materials Science | Materials Science | NREL

Science.gov (United States)

Computational Materials Science Computational Materials Science An image of interconnecting, sphere science capabilities span many research fields and interests. Electronic, Optical, and Transport Properties of Photovoltaic Materials Material properties and defect physics of Si, CdTe, III-V, CIGS, CZTS

Materials Discovery | Materials Science | NREL

Science.gov (United States)

Discovery Materials Discovery Images of red and yellow particles NREL's research in materials characterization of sample by incoming beam and measuring outgoing particles, with data being stored and analyzed Staff Scientist Dr. Zakutayev specializes in design of novel semiconductor materials for energy

Materials 2014: a great success for materials sector

International Nuclear Information System (INIS)

Isnard, Olivier; Crepin, Jerome

2014-01-01

In this work are presented the summaries of the 19 symposiums presented at the conference: 'Materials 2014' and whose topics were: eco-materials, materials for energy storage and conversion, strategic materials, rare elements and recycling, surfaces functionalization and physico-chemical characterization, interfaces and coatings, corrosion, aging, durability, damage mechanical behaviours, disordered materials, glasses and their functionalization, materials and health, functional materials, porous, granular and with a high surface area materials, nano-materials, nano-structured systems, assembling processes, carbonaceous materials, great instruments and studies of materials, materials in severe conditions, powder forming processes, metallic materials and structures lightening. (O.M.)

Development and Evaluation of a Pyriproxyfen-treated Device to Control the Dengue Vector, Aedes aegypti (L.) (Diptera: Culicidae)

Science.gov (United States)

2013-03-01

aegypti females lay their eggs in many sites (Harrington and Ed- man, 2001; Reiter, 2007). This behavior im- proves likelihood of survival. Blood-fed Ae...coiled into skeins) or parous ( ovaries stretched and uncoiled) (Service, 1993). Blood-fed, gravid females were not dissected but classified as...deposition. Ishaaya and Horowitz (1992) found newly deposited eggs (0-1 day old) from female sweet- A PyriProxyfen TreATed device for Ae. Aegypti

Entropy Corrections for a Charged Black Hole of String Theory*

Institute of Scientific and Technical Information of China (English)

Alexis Larra(n)aga

2011-01-01

We study the entropy of the Gibbons-Macda-Garfinkle-Horowitz-Strominger (GMGHS) charged black hole, originated from the effective action that emerges in the low-energy of string theory, beyond semiclassical approximations. Applying the properties of exact differentials for three variables to the first law thermodynamics ve derive the quantum corrections to the entropy of the black hole. The leading (logarithmic) and non leading corrections to the area law are obtained.

We Bomb, Therefore We Are: The Evolution of Terrorist Group Life Cycles

Science.gov (United States)

1994-03-24

34 Political Socialization in Left-Wing Underground Organizations: Biographies of Italian and German Militants," International Social Movement Research... Political Socialization of Terrorist Groups in West Germany," Journal of Political and Military Sociology, v. 11, n. 2, Fall 1983, 236. See also Giorgio...Love?, 30-31. 7 Quoted in Wasmund, " Political Socialization ," 236. 88Irving L. Horowitz, "The Routinization of Terrorism and Its Unanticipated

Gravitational collapse in anti de Sitter space

International Nuclear Information System (INIS)

Garfinkle, David

2004-01-01

A numerical and analytic treatment is presented here of the evolution of initial data of the kind that was conjectured by Hertog, Horowitz and Maeda to lead to a violation of cosmic censorship. That initial data is essentially a thick domain wall connecting two regions of anti de Sitter space. The evolution results in no violation of cosmic censorship, but rather the formation of a small black hole

Viis värvikat visiooni / Tanel Veenre

Index Scriptorium Estoniae

Veenre, Tanel, 1977-

2009-01-01

Eesti Kunstiakadeema lõputööde näitus "Tase'09" Rüütelkonna hoones Toompeal 21. juunini. Arhitekt Martin Voltri Tartu linnujaama projektist. Madis Nurmsi lavakujundusest ja -kostüümidest Jules Massenet' ooperile "Thais", mis esietendus 22. mail Pärnu Endlas. Klaasikunstnik Merle Bukoveci sisepurskkaevude seeriast "Voolujooned". Tootedisainer Pent Talveti magistritööst. Uku-Kristjan Küttise tehtud kirjatüübist

Towards Materials Sustainability through Materials Stewardship

Directory of Open Access Journals (Sweden)

Christopher D. Taylor

2016-10-01

Full Text Available Materials sustainability requires a concerted change in philosophy across the entire materials lifecycle, orienting around the theme of materials stewardship. In this paper, we address the opportunities for improved materials conservation through dematerialization, durability, design for second life, and diversion of waste streams through industrial symbiosis.

Brazing of special metallic materials and material combinations using a special material

International Nuclear Information System (INIS)

Lison, R.

1981-01-01

The special materials include metals of groups IVa, Va and VIa of the periodic tables and their alloys. Their particular properties have won them applications in many highly specialized industries. For these materials to be used, mastery of thermal joining methods appropriate to their characteristics is necessary. High-temperature brazing is one such method for joining special materials. This paper presents variants of this technique suitable for each individual special material. Compatibility tests between various brazing metals and various special materials have been carried out by simulating the temperature/time cycle involved in brazing procedures. Special materials are relatively expensive, and their special properties are not required at every point in a structure: elsewhere they can be replaced by a different special material or by other metals or alloys. This means that joints must be made between two special materials or between a special material and a conventional material. When certain conditions are fulfilled, such joins can be made by high-temperature brazing. This paper also shows the extent to which the geometry of the join determines the choice of process. Example of applications are also given. (orig.)

Development and optimization of nuclear heating and gamma flux measurement techniques in experimental reactors: identification, mastery, treatment and reduction of uncertainties

International Nuclear Information System (INIS)

Amharrak, H.

2012-01-01

This thesis work focuses on the needs for qualification of neutron and photonics calculation schemes in the future Jules Horowitz technological Reactor (RJH) and Pressurized Water Reactors (PWR). It is necessary to establish reliable measurement results with well defined associated uncertainties, for qualification and/or validation. The objective of this thesis is to develop and to improve the nuclear heating measurement methods (especially gamma photons) in MINERVE and EOLE experimental reactors at CEA-Cadarache, using thermo-luminescent detectors (TLD), optically stimulated luminescence detectors (OSLD) and an ionization chamber. It is to identify, prioritize, treat and reduce the various sources of uncertainty and systematic bias associated with the measurement. In a previous study, where nuclear heating was estimated from an integrated radiation dose by TLD in MINERVE and EOLE reactors, it has been shown that dose calculation underestimated the experiment by 25% with a total uncertainty of 15% (2σ). This systematic bias observed has been largely attributed to a lack of nuclear data used to perform the calculations. Therefore, in this work a new series of experiments was set up in the MINERVE reactor to reduce the measurement uncertainties, and better understand the origins of the discrepancies with the modeling. These experiments were carried out in an aluminum or hafnium surrounding (in specifically designed boxes) using a new procedure and analysis methodology. In these experiments, the TLD are calibrated individually, the repeatability of the measurement is experimentally evaluated and the laws of TLD heat are optimized. These improvements are subsequently used for the measurement of nuclear heating in AMMON program (EOLE reactor), dedicated to the qualification of neutron and photonics calculation schemes in the RJH reactor. The measurements of the gamma emitted, with a delay (delayed gamma) after shutdown of the MINERVE reactor, were also carried out

Materials Informatics: Statistical Modeling in Material Science.

Science.gov (United States)

Yosipof, Abraham; Shimanovich, Klimentiy; Senderowitz, Hanoch

2016-12-01

Material informatics is engaged with the application of informatic principles to materials science in order to assist in the discovery and development of new materials. Central to the field is the application of data mining techniques and in particular machine learning approaches, often referred to as Quantitative Structure Activity Relationship (QSAR) modeling, to derive predictive models for a variety of materials-related "activities". Such models can accelerate the development of new materials with favorable properties and provide insight into the factors governing these properties. Here we provide a comparison between medicinal chemistry/drug design and materials-related QSAR modeling and highlight the importance of developing new, materials-specific descriptors. We survey some of the most recent QSAR models developed in materials science with focus on energetic materials and on solar cells. Finally we present new examples of material-informatic analyses of solar cells libraries produced from metal oxides using combinatorial material synthesis. Different analyses lead to interesting physical insights as well as to the design of new cells with potentially improved photovoltaic parameters. © 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Gas storage materials, including hydrogen storage materials

Science.gov (United States)

Mohtadi, Rana F; Wicks, George G; Heung, Leung K; Nakamura, Kenji

2013-02-19

A material for the storage and release of gases comprises a plurality of hollow elements, each hollow element comprising a porous wall enclosing an interior cavity, the interior cavity including structures of a solid-state storage material. In particular examples, the storage material is a hydrogen storage material such as a solid state hydride. An improved method for forming such materials includes the solution diffusion of a storage material solution through a porous wall of a hollow element into an interior cavity.

Materials, critical materials and clean-energy technologies

Science.gov (United States)

Eggert, R.

2017-07-01

Modern engineered materials, components and systems depend on raw materials whose properties provide essential functionality to these technologies. Some of these raw materials are subject to supply-chain risks, and such materials are known as critical materials. This paper reviews corporate, national and world perspectives on material criticality. It then narrows its focus to studies that assess "what is critical" to clean-energy technologies. The focus on supply-chain risks is not meant to be alarmist but rather to encourage attention to monitoring these risks and pursuing technological innovation to mitigate the risks.

A Review of Regional Development Theory

Science.gov (United States)

1989-03-20

Pablo Gonz ies-Casanova, "Internal Colonialism and National Dexelopment," in Irving L. Horowitz, Josue de Castro and John Gerassi, eds. Latin American...34 in Frank Bonilla arid Robert Girling, eds., Structure of be endenc (Stanford, CA: Institute of Politihal Studies, 1973) 161-88; Guillermo V. Flores...and Ronald Bailey, "Internal Colonialism and Racial Minorities in the U.S.: An Overview," in Bonilla and Girlintg, 149-60; Guillermo V. Flores, "Race

Intrusive Thought and Relativity Associated with Task Performance

Science.gov (United States)

1995-01-23

currently living with a partner; Ninety percent of participants were full-time students, 8 percent were employed full-time, and 2 percent were unemployed ...employed full-time 2% unemployed 83% Caucasian 8% Asian 7% African American 2% Hispanic 80% some college 8% high school 5% college degree 5...Research, 11, 213--21B. Horowitz, M.J. (1969). Psychic trauma: Return of images after a stress film. Archives of General Psychiatry, 20, 552- 559

Material Science

Energy Technology Data Exchange (ETDEWEB)

Won, Dong Yeon; Kim, Heung

1987-08-15

This book introduces material science, which includes key of a high-tech industry, new materials of dream like new metal material and semiconductor, classification of materials, microstructure of materials and characteristic. It mentions magic new materials such as shape memory alloy, fine ceramics, engineering fine ceramics, electronic ceramics, engineering plastic, glass, silicone conductor, optical fiber mixed materials and integrated circuit, challenge for new material and development of new materials.

Material Science

International Nuclear Information System (INIS)

Won, Dong Yeon; Kim, Heung

1987-08-01

This book introduces material science, which includes key of a high-tech industry, new materials of dream like new metal material and semiconductor, classification of materials, microstructure of materials and characteristic. It mentions magic new materials such as shape memory alloy, fine ceramics, engineering fine ceramics, electronic ceramics, engineering plastic, glass, silicone conductor, optical fiber mixed materials and integrated circuit, challenge for new material and development of new materials.

Materials, critical materials and clean-energy technologies

Directory of Open Access Journals (Sweden)

Eggert R.

2017-01-01

Full Text Available Modern engineered materials, components and systems depend on raw materials whose properties provide essential functionality to these technologies. Some of these raw materials are subject to supply-chain risks, and such materials are known as critical materials. This paper reviews corporate, national and world perspectives on material criticality. It then narrows its focus to studies that assess “what is critical” to clean-energy technologies. The focus on supply-chain risks is not meant to be alarmist but rather to encourage attention to monitoring these risks and pursuing technological innovation to mitigate the risks.

Photorefractive Materials and Their Applications 2 Materials

CERN Document Server

Günter, Peter

2007-01-01

Photorefractive Materials and Their Applications 2: Materials is the second of three volumes within the Springer Series in Optical Sciences. The book gives a comprehensive review of the most important photorefractive materials and discusses the physical properties of organic and inorganic crystals as well as poled polymers. In this volume, photorefractive effects have been investigated at wavelengths covering the UV, visible and near infrared. Researchers in the field and graduate students of solid-state physics and engineering will gain a thorough understanding of the properties of materials in photorefractive applications. The other two volumes are: Photorefractive Materials and Their Applications 1: Basic Effects. Photorefractive Materials and Their Applications 3: Applications.

Materials Characterization and Microelectronic Implementation of Metal-insulator Transition Materials and Phase Change Materials

Science.gov (United States)

2015-03-26

materials like crystalline semiconductors, graphene , and composites, the materials discussed here could have a significant impact. This thesis investigates...diagnosis [124], crystallinity of pharmaceutical materials [125], materials diagnosis for restoration of paintings [126], and materials research [127...temperature dots and paint were placed on samples on the substrate. Temperature dots are typically used in the transportation of goods such as food in order

Reference material systems: a sourcebook for material assessment

Energy Technology Data Exchange (ETDEWEB)

Bhagat, N. (ed.)

1976-12-01

A reference set of data related to material systems and a framework for carrying out the material technologies assessment are presented. While the bulk of renewables have been considered in this report, the nonrenewable materials dealt with here include structural materials only, such as steel, aluminum, cement and concrete, and bricks. The complete data set is supposed to include material flows, energy requirements, capital and labor inputs, and environmental effects for each process that a resource must go through to become a useful material for an end use. Although effort has been made to obtain as much information as possible, considerable gaps in data, apparent throughout this report, could not be avoided. A new material technology can be evaluated by substituting that technology for appropriate elements of the reference materials system and calculating the net change in material resource, energy, capital and labor requirements, and environmental impacts. This combination of information thus serves as a means of evaluating the potential benefits to be gained by research in various material technologies.

Modeling Non-Linear Material Properties in Composite Materials

Science.gov (United States)

2016-06-28

Technical Report ARWSB-TR-16013 MODELING NON-LINEAR MATERIAL PROPERTIES IN COMPOSITE MATERIALS Michael F. Macri Andrew G...REPORT TYPE Technical 3. DATES COVERED (From - To) 4. TITLE AND SUBTITLE MODELING NON-LINEAR MATERIAL PROPERTIES IN COMPOSITE MATERIALS ...systems are increasingly incorporating composite materials into their design. Many of these systems subject the composites to environmental conditions

Materialism.

Science.gov (United States)

Melnyk, Andrew

2012-05-01

Materialism is nearly universally assumed by cognitive scientists. Intuitively, materialism says that a person's mental states are nothing over and above his or her material states, while dualism denies this. Philosophers have introduced concepts (e.g., realization and supervenience) to assist in formulating the theses of materialism and dualism with more precision, and distinguished among importantly different versions of each view (e.g., eliminative materialism, substance dualism, and emergentism). They have also clarified the logic of arguments that use empirical findings to support materialism. Finally, they have devised various objections to materialism, objections that therefore serve also as arguments for dualism. These objections typically center around two features of mental states that materialism has had trouble in accommodating. The first feature is intentionality, the property of representing, or being about, objects, properties, and states of affairs external to the mental states. The second feature is phenomenal consciousness, the property possessed by many mental states of there being something it is like for the subject of the mental state to be in that mental state. WIREs Cogn Sci 2012, 3:281-292. doi: 10.1002/wcs.1174 For further resources related to this article, please visit the WIREs website. Copyright © 2012 John Wiley & Sons, Ltd.

A SIMPLIFIED FORMULATION OF SPACE-ENERGY CELL THEORY

Energy Technology Data Exchange (ETDEWEB)

Cady, K. B.; MacVean, C. R.

1963-11-15

A simple formulation of polyenergetic thermal utilization theory for heterogeneous lattices is proposed. The main ideas are those of Leslie, who postulated an infinite moderator region with a fictitious, energy dependent absorption which includes all heterogeneous properties of the lattice, and those of Amouyal, Benoist, and Horowitz who postulated absorption rates in terms of fuel and moderator escape probabilities. Simple approximations to energy dependent escape probabilities are discussed and lattice spectra are calculated for several light water lattices. (auth)

Time to guide: evidence for delayed attentional guidance in contextual cueing \\ud

OpenAIRE

Kunar, Melina A.; Flusberg, Stephen J.; Wolfe, Jeremy M

2008-01-01

Contextual cueing experiments show that, when displays are repeated, reaction times (RTs) to find a target decrease over time even when the observers are not aware of the repetition. Recent evidence suggests that this benefit in standard contextual cueing tasks is not likely to be due to an improvement in attentional guidance (Kunar, Flusberg, Horowitz, & Wolfe, 2007). Nevertheless, we ask whether guidance can help participants find the target in a repeated display, if they are given sufficie...

High Temperature Materials Characterization and Advanced Materials Development

International Nuclear Information System (INIS)

Ryu, Woo Seog; Kim, D. H.; Kim, S. H.

2007-06-01

The project has been carried out for 2 years in stage III in order to achieve the final goals of performance verification of the developed materials, after successful development of the advanced high temperature material technologies for 3 years in Stage II. The mechanical and thermal properties of the advanced materials, which were developed during Stage II, were evaluated at high temperatures, and the modification of the advanced materials were performed. Moreover, a database management system was established using user-friendly knowledge-base scheme to complete the integrated-information material database in KAERI material division

Cotard’s Syndrome in a Patient with Schizophrenia: Case Report and Review of the Literature

OpenAIRE

Huarcaya-Victoria, Jeff; Ledesma-Gastañadui, Mario; Huete-Cordova, Maria

2016-01-01

Jules Cotard described, in 1880, the case of a patient characterized by delusions of negation, immortality, and guilt as well as melancholic anxiety among other clinical features. Later this constellation of symptoms was given the eponym Cotard's syndrome, going through a series of theoretical vicissitudes, considering itself currently as just the presence of nihilistic delusions. The presentation of the complete clinical features described by Cotard is a rare occurrence, especially in the co...

The first word in material control is material

International Nuclear Information System (INIS)

Martin, H.R.; Wilkey, D.D.

1989-01-01

Material control has tended to rely on containment and access control, augmented by physical inventories, to meet the material control and accounting (MC ampersand A) goals of detecting theft/diversion and providing assurance that all nuclear material (NM) is present. Such systems have significant deficiencies. Material containment strategies are generally based on protection provided at boundaries around the NM and rely on alarms at the boundary for detection of theft/diversion. Assurance that all NM is present requires a negative inference based on the absence of alarms. Additionally, design of effective boundary protection systems requires that the designer be able to anticipate and provide protection for all scenarios that the insider adversary might utilize in removing material from the facility. Access control is an administrative system that cannot protect against malevolent actions by insiders authorized to access the material. Inventories may not provide timely detection of theft/diversion, and the sensitivity of detection depends on the magnitude of the variance of the inventory difference. More effective material control is provided for both material in storage and in process by a material-oriented system designed to detect abnormal events involving NM. Abnormal events are defined as any unauthorized activity involving NM, whether accidental or deliberate, and are assessed to determine the cause of the discrepancy. The designs of material-oriented control systems vary greatly, depending on the operations involved; however, a model system would include the use of process monitoring data for material control and automated surveillance of material in storage

Materials Analysis and Modeling of Underfill Materials.

Energy Technology Data Exchange (ETDEWEB)

Wyatt, Nicholas B [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Chambers, Robert S. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2015-08-01

The thermal-mechanical properties of three potential underfill candidate materials for PBGA applications are characterized and reported. Two of the materials are a formulations developed at Sandia for underfill applications while the third is a commercial product that utilizes a snap-cure chemistry to drastically reduce cure time. Viscoelastic models were calibrated and fit using the property data collected for one of the Sandia formulated materials. Along with the thermal-mechanical analyses performed, a series of simple bi-material strip tests were conducted to comparatively analyze the relative effects of cure and thermal shrinkage amongst the materials under consideration. Finally, current knowledge gaps as well as questions arising from the present study are identified and a path forward presented.

Materials Chemistry

CERN Document Server

Fahlman, Bradley D

2011-01-01

The 2nd edition of Materials Chemistry builds on the strengths that were recognized by a 2008 Textbook Excellence Award from the Text and Academic Authors Association (TAA). Materials Chemistry addresses inorganic-, organic-, and nano-based materials from a structure vs. property treatment, providing a suitable breadth and depth coverage of the rapidly evolving materials field. The 2nd edition continues to offer innovative coverage and practical perspective throughout. After briefly defining materials chemistry and its history, seven chapters discuss solid-state chemistry, metals, semiconducting materials, organic "soft" materials, nanomaterials, and materials characterization. All chapters have been thoroughly updated and expanded with, for example, new sections on ‘soft lithographic’ patterning, ‘click chemistry’ polymerization, nanotoxicity, graphene, as well as many biomaterials applications. The polymer and ‘soft’ materials chapter represents the largest expansion for the 2nd edition. Each ch...

On the prediction of single-phase forced convection heat transfer in narrow rectangular channels

International Nuclear Information System (INIS)

Ghione, Alberto; Noel, Brigitte; Vinai, Paolo; Demazière, Christophe

2014-01-01

In this paper, selected heat transfer correlations for single-phase forced convection are assessed for the case of narrow rectangular channels. The work is of interest in the thermal-hydraulic analysis of the Jules Horowitz Reactor (JHR), which is a research reactor under construction at CEA-Cadarache (France). In order to evaluate the validity of the correlations, about 300 tests from the SULTAN-JHR database were used. The SULTAN-JHR program was carried out at CEA-Grenoble and it includes different kinds of tests for two different vertical rectangular channels with height of 600 mm and gap of 1.51 and 2.16 mm. The experimental conditions range between 2 - 9 bar for the pressure; 0.5 - 18 m/s for the coolant velocity and 0.5 - 7.5 MW/m 2 for the heat flux (whose axial distribution is uniform). Forty-two thermocouples and eight pressure taps were placed at several axial locations, measuring wall temperature and pressure respectively. The analysis focused on turbulent flow with Reynolds numbers between 5.5 x 10 3 - 2.4 x 10 5 and Prandtl numbers between 1.5 - 6. It was shown that standard correlations as the Dittus-Boelter and Seider-Tate significantly under-estimate the heat transfer coefficient, especially at high Reynolds number. Other correlations specifically designed for narrow rectangular channels were also taken into account and compared. The correlation of Popov-Petukhov in the form suggested by Siman-Tov still under-estimates the heat transfer coefficient, even if slight improvements could be seen. A better agreement for the tests with gap equal to 2.16 mm could be found with the correlation of Ma and the one of Liang. However the heat transfer coefficient when the gap is equal to 1.51 mm could not be predicted accurately. Furthermore these correlations were based on data at low Reynolds numbers (up to 13000) and low heat flux, so the use of them for SULTAN-JHR may be questionable. According to the authors’ knowledge, existing models of heat transfer

Cybermaterials: materials by design and accelerated insertion of materials

Science.gov (United States)

Xiong, Wei; Olson, Gregory B.

2016-02-01

Cybermaterials innovation entails an integration of Materials by Design and accelerated insertion of materials (AIM), which transfers studio ideation into industrial manufacturing. By assembling a hierarchical architecture of integrated computational materials design (ICMD) based on materials genomic fundamental databases, the ICMD mechanistic design models accelerate innovation. We here review progress in the development of linkage models of the process-structure-property-performance paradigm, as well as related design accelerating tools. Extending the materials development capability based on phase-level structural control requires more fundamental investment at the level of the Materials Genome, with focus on improving applicable parametric design models and constructing high-quality databases. Future opportunities in materials genomic research serving both Materials by Design and AIM are addressed.

Alternate Materials In Design Of Radioactive Material Packages

International Nuclear Information System (INIS)

Blanton, P.; Eberl, K.

2010-01-01

This paper presents a summary of design and testing of material and composites for use in radioactive material packages. These materials provide thermal protection and provide structural integrity and energy absorption to the package during normal and hypothetical accident condition events as required by Title 10 Part 71 of the Code of Federal Regulations. Testing of packages comprising these materials is summarized.

Numerical calculation of the entanglement entropy for scalar field in dilaton spacetimes

Science.gov (United States)

Huang, Shifeng; Fang, Xiongjun; Jing, Jiliang

2018-06-01

Using coupled harmonic oscillators model, we numerical analyze the entanglement entropy of massless scalar field in Gafinkle-Horowitz-Strominger (GHS) dilaton spacetime and Gibbons-Maeda (GM) dilaton spacetime. By numerical fitting, we find that the entanglement entropy of the dilaton black holes receive contribution from dilaton charge and is proportional to the area of the event horizon. It is interesting to note that the results of numerical fitting are coincide with ones obtained by using brick wall method and Euclidean path integral approach.

ANDRA - Referential Materials. Volume 1: Context and scope; Volume 2: Argillaceous materials; Volume 3: Cementitious materials; Volume 4: The corrosion of metallic materials

International Nuclear Information System (INIS)

2001-01-01

This huge document gathers four volumes. The first volume presents some generalities about materials used in the storage of radioactive materials (definition, design principle, current choices and corresponding storage components, general properties of materials and functions of the corresponding storage components, physical and chemical solicitations experienced by materials in a storage), and the structure and content of the other documents. The second volume addresses argillaceous materials. It presents some generalities about these materials in the context of a deep geological storage, and about their design. It presents and comments the crystalline and chemical, and physical and chemical characteristics of swelling argillaceous materials and minerals, describes how these swelling argillaceous materials are shaped and set up, presents and comments physical properties (hydraulic, mechanical and thermal properties) of these materials, comments and discusses the modelling of the geo-chemical behaviour, and their behaviour in terms of containment and transport of radionuclides. The third volume addresses cementitious materials. It presents some generalities about these materials in the context of a deep geological storage, and about their definition and specifications. It presents some more detailed generalities (cement definition and composition, hydration, microstructure of hydrated cements, adjuvants), presents and comments their physical properties (fresh concrete structure and influence of composition, main aimed properties in the hardened status, transfer, mechanical, and thermal properties, shaping and setting up of these materials, technical solutions for hydraulic works). The fourth volume addresses the corrosion of metallic materials. It presents some generalities about these materials in the context of a deep geological storage of radioactive materials. It presents metallic materials and discusses their corrosion behaviour. It describes the peculiarities

Materials design and development of functional materials for industry

International Nuclear Information System (INIS)

Asahi, Ryoji; Morikawa, Takeshi; Hazama, Hirofumi; Matsubara, Masato

2008-01-01

It is now well recognized that we are witnessing a golden age of innovation with novel materials, with discoveries that are important for both basic science and industry. With the development of theory along with computing power, quantum materials design-the synthesis of materials with the desired properties in a controlled way via materials engineering on the atomic scale-is becoming a major component of materials research. Computational prediction based on first-principles calculations has helped to find an efficient way to develop materials that are much needed for industry, as we have seen in the successful development of visible-light sensitized photocatalysts and thermoelectric materials. Close collaboration between theory and experiment is emphasized as an essential for success

Materials and material testing

International Nuclear Information System (INIS)

Joergens, H.

1978-01-01

A review based on 105 literature quotations is given on the latest state of development in the steel sector and in the field of non-ferrous metals and plastics. The works quoted also include, preparation, working, welding including simulation methods, improvement of weldability, material mechanics (explanation of defects mechanisms by means of fracture mechanics), defect causes (corrosion, erosion, hydrogen influence), mechanical-technological and non-destructive material testing. Examples from the field of reactor building are also given within there topics. (IHOE) [de

Entfremdung als Strukturmoment von Unterricht? Eine Fallstudie zur Arbeit eines Schülers an der Tafel aus der Sicht der pädagogischen Unterrichtsforschung

OpenAIRE

Twardella, Johannes

2010-01-01

"In den 70er Jahren des 20. Jahrhunderts beobachtete Jules Henry im Rahmen seiner ethnographischen Schulforschungen die Arbeit eines Schülers an der Tafel und interpretierte sie aus einer sozialpsychologischen Perspektive heraus als einen Prozess, in dem ein Schüler lernt, was "Entfremdung" ist. Ausgehend von dieser Deutung wird in dem vorliegenden Aufsatz der Frage nachgegangen, ob der Begriff der Entfremdung auch heute noch für die Erforschung von Unterricht fruchtbar gemacht werden kann. D...

Composite materials

International Nuclear Information System (INIS)

Sambrook, D.J.

1976-01-01

A superconductor composite is described comprising at least one longitudinally extending superconductor filament or bundle of sub-filaments, each filament or bundle of sub-filaments being surrounded by and in good electrical contact with a matrix material, the matrix material comprising a plurality of longitudinally extending cells of a metal of high electrical conductivity surrounded by a material of lower electrical conductivity. The high electrical conductivity material surrounding the superconducting filament or bundle of sub-filaments is interrupted by a radially extending wall of the material of the lower electrical conductivity, the arrangement being such that at least two superconductor filaments or sub-filaments are circumferentially circumscribed by a single annulus of the material of high electrical conductivity. The annulus is electrically interrupted by a radially extending wall of the material of low electrical conductivity

Physically Functional Materials

DEFF Research Database (Denmark)

2002-01-01

acids or peptides having azobenzenes or other physicially functional groups, e.g., photoresponsive groups, as side chains. These compounds may be synthesized using solid phase peptide synthesis techniques. Materials, e.g., thin films, comprising such compounds may be used for optical storage...... of information (holographic data storage), nonlinear optics (NLO), as photoconductors, photonic band-gap materials, electrically conducting materials, electroluminescent materials, piezo-electric materials, pyroelectric materials, magnetic materials, ferromagnetic materials, ferroelectric materials......, photorefractive materials, or materials in which light-induced conformational changes can be produced. Optical anisotropy may reversibly be generated with polarized laser light whereby a hologram is formed. First order diffraction efficiencies of up to around 80% have been obtained....

Implied Materiality and Material Disclosures of Credit Ratings

OpenAIRE

Eccles, Robert G; Youmans, Timothy John

2015-01-01

This first of three papers in our series on materiality in credit ratings will examine the materiality of credit ratings from an “implied materiality” and governance disclosure perspective. In the second paper, we will explore the materiality of environmental, social, and governance (ESG) factors in credit ratings’ methodologies and introduce the concept of “layered materiality.” In the third paper, we will evaluate current and potential credit rating agency (CRA) business models based on our...

Virtual materials design using databases of calculated materials properties

International Nuclear Information System (INIS)

Munter, T R; Landis, D D; Abild-Pedersen, F; Jones, G; Wang, S; Bligaard, T

2009-01-01

Materials design is most commonly carried out by experimental trial and error techniques. Current trends indicate that the increased complexity of newly developed materials, the exponential growth of the available computational power, and the constantly improving algorithms for solving the electronic structure problem, will continue to increase the relative importance of computational methods in the design of new materials. One possibility for utilizing electronic structure theory in the design of new materials is to create large databases of materials properties, and subsequently screen these for new potential candidates satisfying given design criteria. We utilize a database of more than 81 000 electronic structure calculations. This alloy database is combined with other published materials properties to form the foundation of a virtual materials design framework (VMDF). The VMDF offers a flexible collection of materials databases, filters, analysis tools and visualization methods, which are particularly useful in the design of new functional materials and surface structures. The applicability of the VMDF is illustrated by two examples. One is the determination of the Pareto-optimal set of binary alloy methanation catalysts with respect to catalytic activity and alloy stability; the other is the search for new alloy mercury absorbers.

New Materials = New Expressive Powers: Smart Material Interfaces and Arts, experience via smart materials

NARCIS (Netherlands)

Minuto, A.; Pittarello, Fabio; Nijholt, Antinus

2014-01-01

It is not easy for a growing artist to find his poetry. Smart materials could be an answer for those who are looking for new forms of art. Smart Material Interfaces (SMI) define a new interaction paradigm based on dynamic modications of the innovative materials' properties. SMI can be applied in

FOREWORD: Materials metrology Materials metrology

Science.gov (United States)

Bennett, Seton; Valdés, Joaquin

2010-04-01

It seems that so much of modern life is defined by the materials we use. From aircraft to architecture, from cars to communications, from microelectronics to medicine, the development of new materials and the innovative application of existing ones have underpinned the technological advances that have transformed the way we live, work and play. Recognizing the need for a sound technical basis for drafting codes of practice and specifications for advanced materials, the governments of countries of the Economic Summit (G7) and the European Commission signed a Memorandum of Understanding in 1982 to establish the Versailles Project on Advanced Materials and Standards (VAMAS). This project supports international trade by enabling scientific collaboration as a precursor to the drafting of standards. The VAMAS participants recognized the importance of agreeing a reliable, universally accepted basis for the traceability of the measurements on which standards depend for their preparation and implementation. Seeing the need to involve the wider metrology community, VAMAS approached the Comité International des Poids et Mesures (CIPM). Following discussions with NMI Directors and a workshop at the BIPM in February 2005, the CIPM decided to establish an ad hoc Working Group on the metrology applicable to the measurement of material properties. The Working Group presented its conclusions to the CIPM in October 2007 and published its final report in 2008, leading to the signature of a Memorandum of Understanding between VAMAS and the BIPM. This MoU recognizes the work that is already going on in VAMAS as well as in the Consultative Committees of the CIPM and establishes a framework for an ongoing dialogue on issues of materials metrology. The question of what is meant by traceability in the metrology of the properties of materials is particularly vexed when the measurement results depend on a specified procedure. In these cases, confidence in results requires not only traceable

Metallic composite materials

International Nuclear Information System (INIS)

Frommeyer, G.

1987-01-01

The structure and properties of metallic composite materials and composite materials with metallic matrix are considered. In agreement with the morphology of constituent phases the following types of composite materials are described: dispersion-strengthened composite materials; particle-reinforced composite materials; fibrous composite materials; laminar composite materials. Data on strength and electric properties of the above-mentioned materials, as well as effect of the amount, location and geometric shape of the second phase on them, are presented

Report of the Material Control and Material Accounting Task Force: the role of material control and material accounting in the safeguards program

International Nuclear Information System (INIS)

1978-03-01

Results are presented of NRC Task Force investigations to identify the functions of a safeguards program in relation to the NRC safeguards objective, define the role and objectives of material control and material accounting systems within that program, develop goals for material control and material accounting based on those roles and objectives, assess current material control and material accounting requirements and performance levels in the light of the goals, and recommend future actions needed to attain the proposed goals. It was found that the major contribution of material accounting to the safeguards program is in support of the assurance function. It also can make secondary contributions to the prevention and response functions. In the important area of loss detection, a response measure, it is felt that limitations inherent in material accounting for some fuel cycle operations limit its ability to operate as a primary detection system to detect a five formula kilogram loss with high assurance (defined by the Task Force as a probability of detection of 90 percent or more) and that, in those cases, material accounting can act only in a backup role. Physical security and material control must make the primary contributions to the prevention and detection of theft, so that safeguards do not rely primarily for detection capabilities on material accounting. There are several areas of accounting that require more emphasis than is offered by the current regulatory base. These areas include: timely shipper-receiver difference analysis and reconciliation; a demand physical inventory capability; improved loss localization;discard measurement verification; timely recovery of scrap; improved measurement and record systems; and limits on cumulative inventory differences and shipper-receiver differences. An increased NRC capability for monitoring and analyzing licensee accounting data and more timely and detailed submittals of data to NRC by licensees are recommended

Reference materials and representative test materials: the nanotechnology case

International Nuclear Information System (INIS)

Roebben, G.; Rasmussen, K.; Kestens, V.; Linsinger, T. P. J.; Rauscher, H.; Emons, H.; Stamm, H.

2013-01-01

An increasing number of chemical, physical and biological tests are performed on manufactured nanomaterials for scientific and regulatory purposes. Existing test guidelines and measurement methods are not always directly applicable to or relevant for nanomaterials. Therefore, it is necessary to verify the use of the existing methods with nanomaterials, thereby identifying where modifications are needed, and where new methods need to be developed and validated. Efforts for verification, development and validation of methods as well as quality assurance of (routine) test results significantly benefit from the availability of suitable test and reference materials. This paper provides an overview of the existing types of reference materials and introduces a new class of test materials for which the term ‘representative test material’ is proposed. The three generic concepts of certified reference material, reference material(non-certified) and representative test material constitute a comprehensive system of benchmarks that can be used by all measurement and testing communities, regardless of their specific discipline. This paper illustrates this system with examples from the field of nanomaterials, including reference materials and representative test materials developed at the European Commission’s Joint Research Centre, in particular at the Institute for Reference Materials and Measurements (IRMM), and at the Institute for Health and Consumer Protection (IHCP).

Optical materials

International Nuclear Information System (INIS)

Poker, D.B.; Ortiz, C.

1989-01-01

This book reports on: Diamond films, Synthesis of optical materials, Structure related optical properties, Radiation effects in optical materials, Characterization of optical materials, Deposition of optical thin films, and Optical fibers and waveguides

The materiality of materials and artefacts used in science classrooms

DEFF Research Database (Denmark)

Cowie, Bronwen; Otrel-Cass, Kathrin; Moreland, Judy

Material objects and artefacts receive limited attention in science education (Roehl, 2012) though they shape emerging interactions. This is surprising given science has material and a social dimensions (Pickering, 1995) whereby new knowledge develops as a consensus explanation of natural phenomena...... that is mediated significantly through materials and instruments used. Here we outline the ways teachers deployed material objects and artefacts by identifying their materiality to provide scenarios and resources (Roth, 2005) for interactions. Theoretical framework We use Ingold's (2011) distinction between...... materials as natural objects in this world and artefacts as manmade objects. We are aware that in a classroom material objects and artefacts shape, and are shaped by classroom practice through the way they selectively present scientific explanations. However, materials and artefacts have no intrinsic...

Friction Material Composites Materials Perspective

CERN Document Server

Sundarkrishnaa, K L

2012-01-01

Friction Material Composites is the first of the five volumes which strongly educates and updates engineers and other professionals in braking industries, research and test labs. It explains besides the formulation of design processes and its complete manufacturing input. This book gives an idea of mechanisms of friction and how to control them by designing .The book is  useful for designers  of automotive, rail and aero industries for designing the brake systems effectively with the integration of friction material composite design which is critical. It clearly  emphasizes the driving  safety and how serious designers should  select the design input. The significance of friction material component like brake pad or a liner as an integral part of the brake system of vehicles is explained. AFM pictures at nanolevel illustrate broadly the explanations given.

Dirac materials

OpenAIRE

Wehling, T. O.; Black-Schaffer, A. M.; Balatsky, A. V.

2014-01-01

A wide range of materials, like d-wave superconductors, graphene, and topological insulators, share a fundamental similarity: their low-energy fermionic excitations behave as massless Dirac particles rather than fermions obeying the usual Schrodinger Hamiltonian. This emergent behavior of Dirac fermions in condensed matter systems defines the unifying framework for a class of materials we call "Dirac materials''. In order to establish this class of materials, we illustrate how Dirac fermions ...

Report of the Material Control and Material Accounting Task Force

International Nuclear Information System (INIS)

1978-03-01

In September 1977 a Task Force was formed to complete a study of the role of material control and material accounting in NRC's safeguards program. The Task Force's assignment was to: define the roles and objectives of material control and material accounting in the NRC safeguards program; recommend goals for the material control and material accounting systems based on their roles and objectives; assess the extent to which the existing safeguards regulatory base meets or provides the capability to meet the recommended goals; and provide direction for material control and material accounting development, including both near-term and long-term upgrades. The study was limited to domestic nuclear facilities possessing significant amounts of plutonium, uranium-233 or highly enriched uranium in unsealed form. The Task Force findings are reported

Brans-Dicke wormhole revisited

International Nuclear Information System (INIS)

Bhattacharya, Amrita; Nandi, Kamal K; Nigmatzyanov, Ilnur; Izmailov, Ramil

2009-01-01

A basic constraint to be satisfied by a Brans class I solution for being a traversible wormhole is derived. It is argued that the solution could be a wormhole analog of the Horowitz-Ross naked black hole. It is further demonstrated that the wormhole is traversible only 'in principle', but not in practice. Using a recently proposed measure of total gravitational energy inside a static wormhole configuration, it is shown that the wormhole contains the repulsive gravity required for the defocussing of orbits at the throat.

General definition of gravitational tension

International Nuclear Information System (INIS)

Harmark, T.; Obers, N.A.

2004-01-01

In this note we give a general definition of the gravitational tension in a given asymptotically translationally-invariant spatial direction of a space-time. The tension is defined via the extrinsic curvature in analogy with the Hawking-Horowitz definition of energy. We show the consistency with the ADM tension formulas for asymptotically-flat space-times, in particular for Kaluza-Klein black hole solutions. Moreover, we apply the general tension formula to near-extremal branes, constituting a check for non-asymptotically flat space-times. (author)

Proceedings of DAE-BRNS national workshop on materials chemistry: functional materials

International Nuclear Information System (INIS)

2011-12-01

Design and development of materials with tailored properties assumes great significance in our everyday life and are crucial to modern technologies. Chemistry has had a tremendous Convener role in developing several need based materials by integrating multiple functionalities. The year 2011, being recognised as the International Year of Chemistry by the UNESCO, assumes further significance for material chemists. In view of the renowned interest in advanced functional materials, the Society for Materials Chemistry, India together with Chemistry Division, BARC has taken an initiative to organise this National Workshop on Materials Chemistry (NWMC-2011) under the theme 'Functional Materials (FUN-MAT)'. NWMC- 2011 aims to provide a forum for young researchers to interact with experts involved in synthesis, processing and applications of various advanced functional materials. In particular, recent developments and future prospects of magnetic, electronic and optical materials, glasses, ceramics, soft materials, materials for sensors, materials for hydrogen production and storage etc. will be addressed in this workshop. Papers relevant to INIS are indexed separately

Computational materials chemistry for carbon capture using porous materials

International Nuclear Information System (INIS)

Sharma, Abhishek; Malani, Ateeque; Huang, Runhong; Babarao, Ravichandar

2017-01-01

Control over carbon dioxide (CO 2 ) release is extremely important to decrease its hazardous effects on the environment such as global warming, ocean acidification, etc. For CO 2 capture and storage at industrial point sources, nanoporous materials offer an energetically viable and economically feasible approach compared to chemisorption in amines. There is a growing need to design and synthesize new nanoporous materials with enhanced capability for carbon capture. Computational materials chemistry offers tools to screen and design cost-effective materials for CO 2 separation and storage, and it is less time consuming compared to trial and error experimental synthesis. It also provides a guide to synthesize new materials with better properties for real world applications. In this review, we briefly highlight the various carbon capture technologies and the need of computational materials design for carbon capture. This review discusses the commonly used computational chemistry-based simulation methods for structural characterization and prediction of thermodynamic properties of adsorbed gases in porous materials. Finally, simulation studies reported on various potential porous materials, such as zeolites, porous carbon, metal organic frameworks (MOFs) and covalent organic frameworks (COFs), for CO 2 capture are discussed. (topical review)

Magnetic Materials

Science.gov (United States)

Spaldin, Nicola A.

2003-04-01

Magnetic materials are the foundation of multi-billion dollar industries and the focus of intensive research across many disciplines. This book covers the fundamentals, basic theories and applications of magnetism and conventional magnetic materials. Based on a lecture course given by Nicola Spaldin in the Materials Department at University of California, Santa Barbara, the book is ideal for a one- semester course in magnetic materials. It contains numerous homework problems and solutions.

Vanadium based materials as electrode materials for high performance supercapacitors

Science.gov (United States)

Yan, Yan; Li, Bing; Guo, Wei; Pang, Huan; Xue, Huaiguo

2016-10-01

As a kind of supercapacitors, pseudocapacitors have attracted wide attention in recent years. The capacitance of the electrochemical capacitors based on pseudocapacitance arises mainly from redox reactions between electrolytes and active materials. These materials usually have several oxidation states for oxidation and reduction. Many research teams have focused on the development of an alternative material for electrochemical capacitors. Many transition metal oxides have been shown to be suitable as electrode materials of electrochemical capacitors. Among them, vanadium based materials are being developed for this purpose. Vanadium based materials are known as one of the best active materials for high power/energy density electrochemical capacitors due to its outstanding specific capacitance and long cycle life, high conductivity and good electrochemical reversibility. There are different kinds of synthetic methods such as sol-gel hydrothermal/solvothermal method, template method, electrospinning method, atomic layer deposition, and electrodeposition method that have been successfully applied to prepare vanadium based electrode materials. In our review, we give an overall summary and evaluation of the recent progress in the research of vanadium based materials for electrochemical capacitors that include synthesis methods, the electrochemical performances of the electrode materials and the devices.

4. Food and the Futurist ‘Revolution’. A Note

OpenAIRE

Roberto Ibba; Domenico Sanna

2016-01-01

The Italian futurist movement dealt with all branches traditionally tied to high culture, but, at the same time, it approached ‘humbler’ fields as fashion, sports and cookery. In his french period, Marinetti met the chef Jules Maincave and they opened together a ‘Futurist’ restaurant. In 1913 Maincave published the manifesto La cuisine futuriste. In 1930, Marinetti issued in Turin the Manifesto of Futurist Cooking. The publication was preceded by a celebration dinner which took place at the P...

50 Years of Army Computing From ENIAC to MSRC

Science.gov (United States)

2000-09-01

CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING...about 50 years ago. None of these capabilities that we take for granted now even existed. They hadn’t even been dreamt of by such visionaries as Jules...not work at Disneyland . We are not trying to make motion pictures for entertainment. We are trying to solve problems for scientifi c analysis, for

Graafikatriennaali grand prix Korea kunstnikule

Index Scriptorium Estoniae

1998-01-01

Tallinna XI graafikatriennaali rahvusvaheline žürii andis grand prix korea kunstnikule Chung¡Sang-Gonile, kolm võrdset preemiat - soome kunstnikele Anita Jensenile ja Tapani Mikkonenile ning jaapani kunstnikule Estuko Obatale. Eesti Kunstimuuseumi preemia - Wendy Swallow. Tallinna linna preemia ja Ivar Luki sponsoripreemia - Walter Jule. Sponsoripreemiad : Paletti Eesti AS preemia - Inga Heamägi; Rannila Profiili preemia - Mojca Zlokarnik; UNDP preemia - Andrea Juan. Rotermanni soolalao arhitektuuri- ja kunstikeskuse diplom - Lis Ingram, Heli Päivikki Kurunsaari, Randi Strand, Wendy Swallow

Librarians are vicious monsters, but canalso recommend a good read : En analys av alternativa bibliotekarieframställningar iscience fiction-litteratur

OpenAIRE

Österman Solborg, Amanda

2014-01-01

Uppsatsens syfte är att studera framställningar av manliga bibliotekarier i science fiction-litteratur, analysera vad dessa framställningar förmedlar för föreställningar om bibliotek och biblioteksverksamhet, samt att analysera de manliga bibliotekariernas koppling till maskuliniteter. Titlarna som analyseras är fyra romaner; Audrey Niffeneggers Tidsresenärens hustru, Dmitrij Gluchovskijs Metro 2033, Jules Vernes Paris i tjugonde seklet, och Jasper Ffordes Uppslukad – En fängslande historia o...

Composite material dosimeters

Science.gov (United States)

Miller, Steven D.

1996-01-01

The present invention is a composite material containing a mix of dosimeter material powder and a polymer powder wherein the polymer is transparent to the photon emission of the dosimeter material powder. By mixing dosimeter material powder with polymer powder, less dosimeter material is needed compared to a monolithic dosimeter material chip. Interrogation is done with excitation by visible light.

Mechanical Material Engineering

International Nuclear Information System (INIS)

Kim, Mun Il

1993-01-01

This book introduced mechanical material with introduction, basic problems about metal ingredient of machine of metal and alloy, property of metal material mechanical metal material such as categorization of metal material and high tensile structure steel, mechanic design and steel material with three important points on using of steel materials, selection and directions machine structural steel, selection and directions of steel for tool, selection and instruction of special steel like stainless steel and spring steel, nonferrous metal materials and plastic.

Discrimination of Naturally Occurring Radioactive Material in Plastic Scintillator Material

International Nuclear Information System (INIS)

Ely, James H.; Kouzes, Richard T.; Geelhood, Bruce D.; Schweppe, John E.; Warner, Ray A.

2003-01-01

Plastic scintillator material is used in many applications for the detection of gamma-rays from radioactive material, primarily due to the sensitivity per unit cost compared to other detection materials. However, the resolution and lack of full-energy peaks in the plastic scintillator material prohibits detailed spectroscopy. Therefore, other materials such as doped sodium iodide are used for spectroscopic applications. The limited spectroscopic information can however be exploited in plastic scintillator materials to provide some discrimination. The discrimination between man-made and naturally occurring sources would be useful in reducing alarm screening for radiation detection applications which target man-made sources. The results of applying the limited energy information from plastic scintillator material for radiation portal monitors are discussed.

Materials science

International Nuclear Information System (INIS)

Anon.

1977-01-01

The Materials Science Division is engaged in research on physical properties of materials and the effects of radiation upon them. This involves solid state materials undergoing phase transitions, energy storing materials, and biomaterials. The Division also offers research facilities for M.S. and Ph.D. thesis work in the fields of physics, chemistry, materials, and radiation sciences in cooperation with the various colleges and departments of the UPR Mayaguez Campus. It is anticipated that it will serve as a catalyst in starting energy-related research programs in cooperation with UPR faculty, especially programs involving solar energy. To encourage and promote cooperative efforts, contact is maintained with former graduate students and with visiting scientists from Latin American research institutions

Materials in the economy; material flows, scarcity, and the environment

Science.gov (United States)

Wagner, Lorie A.

2002-01-01

The importance of materials to the economy of the United States is described, including the levels of consumption and uses of materials. The paths (or flows) that materials take from extraction, through processing, to consumer products, and then final disposition are illustrated. Scarcity and environmental issues as they relate to the flow of materials are discussed. Examples for the three main themes of the report (material flows, scarcity, and the environment) are presented.

Friction material composites copper-metal-free material design perspective

CERN Document Server

Sundarkrishnaa, K L

2015-01-01

This book examines material composites used in connection with brake friction, their design and safety. To aid in understanding, the essentials of friction are explained. This second edition was extended to include friction material composites without copper, as they offer an environmentally friendlier option. The second edition is intended to support beginners by offering insights into the essentials of friction material composites, helping them to develop a broader understanding of brake friction materials. Friction materials find wide-ranging applications in household and industrial appliances, brake pads for automotive applications, rail brake friction pads and composition brake blocks. This second edition is an introductory volume to a set of related books, and is based on the author’s experience and expertise with various material manufacturers, brake manufacturers, vehicle manufacturers, researchers and testing labs around the world with which the author has been associated for the past 28 years.

Plasma-material interactions

International Nuclear Information System (INIS)

Wilson, K.L.

1984-01-01

Plasma-interactive components must be resistant to erosion processes, efficient in heat removal, and effective in minimizing tritium inventory and permeation. As long as plasma edge temperatures are 50 eV, no one material can satisfy the diverse requirements imposed by these plasma materials interactions. The only solution is the design of duplex, or even more complicated, structures. The material that faces the plasma should be low atomic number, with acceptable erosion and evaporation characteristics. The substrate material must have high thermal conductivity for heat removal. Finally, materials must be selected judiciously for tritium compatibility. In conclusion, materials play a critical role in the achievement of safe and economical magnetic fusion energy. Improvements in materials have already led to many advances in present day device operation, but additional innovative materials solutions are required for the critical plasma materials interaction issues in future power reactors

Composite Material Suitable for Use as Electrode Material in a SOC

DEFF Research Database (Denmark)

2010-01-01

The present invention relates to composite material suitable for use as an electrode material in a solid oxide cell, said composite material consist of at least two non-miscible mixed ionic and electronic conductors. Further provided is a composite material suitable for use as an electrode material...... in a solid oxide cell, said composite material being based on (Gd1-xSrx)1-sFe1-yCoyO3-[delta] or (Ln1-xSrx)1-sFe1-yCioyO3-[delta](s equal to 0.05 or larger) wherein Ln is a lanthanide element, Sc or Y, said composite material comprising at least two phases which are non-miscible, said composite material...... being obtainable by the glycine nitrate combustion method. Said composite material may be used for proving an electrode material in the form of at least a two-phase system showing a very low area specific resistance of around 0.1 [Omega]cm2 at around 600 DEG C....

Light-material interactions in laser material processing

International Nuclear Information System (INIS)

Chiang, S.; Albright, C.E.

1989-01-01

The authors discusses how light interactions with materials in laser material processing operations occur by a variety of mechanisms depending on the material being processed, the wavelength of the laser light, the gaseous environment, and the physical state of the material surface. The high reflectivity of metals limits the fraction of the beam power absorbed by the solid metal surface. For metals in the solid state, reflectivity increases as the wavelength of the laser light and the electrical conductivity of the metal increase. The reflectivity of metals is reduced upon heating to the melting point, and further reduced upon melting. At high power densities the liquid metal surface is heated so quickly that very rapid vaporization occurs. The recoil force produced by the evaporation causes a depression in the liquid/vapor interface. The keyhole resulting from this depression allows for multiple reflections and thus increases beam absorption in the liquid

High temperature material characterization and advanced materials development

International Nuclear Information System (INIS)

Ryu, Woo Seog; Kim, D. H.; Kim, S. H. and others

2005-03-01

The study is to characterize the structural materials under the high temperature, one of the most significant environmental factors in nuclear systems. And advanced materials are developed for high temperature and/or low activation in neutron irradiation. Tensile, fatigue and creep properties have been carried out at high temperature to evaluate the mechanical degradation. Irradiation tests were performed using the HANARO. The optimum chemical composition and heat treatment condition were determined for nuclear grade 316NG stainless steel. Nitrogen, aluminum, and tungsten were added for increasing the creep rupture strength of FMS steel. The new heat treatment method was developed to form more stable precipitates. By applying the novel whiskering process, high density SiC/SiC composites with relative density above 90% could be obtained even in a shorter processing time than the conventional CVI process. Material integrated databases are established using data sheets. The databases of 6 kinds of material properties are accessible through the home page of KAERI material division

Material Ecocriticism: Materiality, Agency, and Models of Narrativity

Directory of Open Access Journals (Sweden)

Serenella Iovino

2012-01-01

Full Text Available The proliferation of studies bearing on the intellectual movement known as the "new materialisms" evinces that a material turn is becoming an important paradigm in environmental humanities. Ranging from social and science studies, feminism, to anthropology, geography, environmental philosophies and animal studies, this approach is bringing innovative ways of considering matter and material relations that, coupled with reflections on agency, text, and narrativity, are going to impact ecocriticism in an unprecedented way.In consideration of the relevance of this debate, we would like to draw for Ecozon@'s readers an introductory map of the new paradigm and introduce what can be called "material ecocriticism." We will illustrate what we consider to be its main features, situating them in the conceptual horizons of the new materialisms. From this genealogical sketch, we will examine the re-definitions of concepts like matter, agency, discursivity, and intentionality, with regard to their effects on ecocriticism and in terms of their ethical perspectives.

Method for forming materials

Science.gov (United States)

Tolle, Charles R [Idaho Falls, ID; Clark, Denis E [Idaho Falls, ID; Smartt, Herschel B [Idaho Falls, ID; Miller, Karen S [Idaho Falls, ID

2009-10-06

A material-forming tool and a method for forming a material are described including a shank portion; a shoulder portion that releasably engages the shank portion; a pin that releasably engages the shoulder portion, wherein the pin defines a passageway; and a source of a material coupled in material flowing relation relative to the pin and wherein the material-forming tool is utilized in methodology that includes providing a first material; providing a second material, and placing the second material into contact with the first material; and locally plastically deforming the first material with the material-forming tool so as mix the first material and second material together to form a resulting material having characteristics different from the respective first and second materials.

Report of the Material Control and Material Accounting Task Force: appendices

International Nuclear Information System (INIS)

1978-03-01

Five appendixes are presented. The first comprises a chronological development of material control and material accounting requirements. The second gives a description of current NRC control and material accounting requirements, practices, and capabilities. In the third a description is given of NRC's research and technical assistance program concerning the measurement and measurement quality control elements of licensee material control and material accounting systems. The fourth covers some special considerations related to inventory differences and their analysis. In the fifth a detailed description is presented of the evaluation methodologies used in development of improved material control and material accounting systems

Composite material

Science.gov (United States)

Hutchens, Stacy A [Knoxville, TN; Woodward, Jonathan [Solihull, GB; Evans, Barbara R [Oak Ridge, TN; O'Neill, Hugh M [Knoxville, TN

2012-02-07

A composite biocompatible hydrogel material includes a porous polymer matrix, the polymer matrix including a plurality of pores and providing a Young's modulus of at least 10 GPa. A calcium comprising salt is disposed in at least some of the pores. The porous polymer matrix can comprise cellulose, including bacterial cellulose. The composite can be used as a bone graft material. A method of tissue repair within the body of animals includes the steps of providing a composite biocompatible hydrogel material including a porous polymer matrix, the polymer matrix including a plurality of pores and providing a Young's modulus of at least 10 GPa, and inserting the hydrogel material into cartilage or bone tissue of an animal, wherein the hydrogel material supports cell colonization in vitro for autologous cell seeding.

Touching Materiality

DEFF Research Database (Denmark)

Rasmussen, Lisa Rosén

2012-01-01

Dripping ink pens, colourful paint on skin, vegetables pots on a school roof. In interviews with three generations of former school pupils, memories of material objects bore a relation to everyday school life in the past. Interwoven, these objects entered the memorising processes, taking...... the interviewer and interviewee beyond an exclusively linguistic understanding of memory. This article analyses how the shifting objects of materiality in personal and generational school memories connects to material as well as sensuous experiences of everyday school life and its complex processes of learning....... Drawing on anthropological writings, the article argues that the objects of materiality are part of important but non-verbalised memories of schooling. The Dutch philosopher Eelco Runia’s notions of presence and metonymy are incorporated as tools for approaching objects of materiality in memory studies....

Coated electroactive materials

Science.gov (United States)

Amine, Khalil; Abouimrane, Ali

2016-08-30

A process includes suspending an electroactive material in a solvent, suspending or dissolving a carbon precursor in the solvent; and depositing the carbon precursor on the electroactive material to form a carbon-coated electroactive material. Compositions include a graphene-coated electroactive material prepared from a solution phase mixture or suspension of an electroactive material and graphene, graphene oxide, or a mixture thereof.

Nanocrystalline ceramic materials

Science.gov (United States)

Siegel, Richard W.; Nieman, G. William; Weertman, Julia R.

1994-01-01

A method for preparing a treated nanocrystalline metallic material. The method of preparation includes providing a starting nanocrystalline metallic material with a grain size less than about 35 nm, compacting the starting nanocrystalline metallic material in an inert atmosphere and annealing the compacted metallic material at a temperature less than about one-half the melting point of the metallic material.

The Newest Machine Material

International Nuclear Information System (INIS)

Seo, Yeong Seop; Choe, Byeong Do; Bang, Meong Sung

2005-08-01

This book gives descriptions of machine material with classification of machine material and selection of machine material, structure and connection of material, coagulation of metal and crystal structure, equilibrium diagram, properties of metal material, elasticity and plasticity, biopsy of metal, material test and nondestructive test. It also explains steel material such as heat treatment of steel, cast iron and cast steel, nonferrous metal materials, non metallic materials, and new materials.

Electrode material comprising graphene-composite materials in a graphite network

Science.gov (United States)

Kung, Harold H.; Lee, Jung K.

2017-08-08

A durable electrode material suitable for use in Li ion batteries is provided. The material is comprised of a continuous network of graphite regions integrated with, and in good electrical contact with a composite comprising graphene sheets and an electrically active material, such as silicon, wherein the electrically active material is dispersed between, and supported by, the graphene sheets.

Ceramic piezoelectric materials

International Nuclear Information System (INIS)

Kaszuwara, W.

2004-01-01

Ceramic piezoelectric materials conert reversibility electric energy into mechanical energy. In the presence of electric field piezoelectric materials exhibit deformations up to 0.15% (for single crystals up to 1.7%). The deformation energy is in the range of 10 2 - 10 3 J/m 3 and working frequency can reach 10 5 Hz. Ceramic piezoelectric materials find applications in many modern disciplines such as: automatics, micromanipulation, measuring techniques, medical diagnostics and many others. Among the variety of ceramic piezoelectric materials the most important appear to be ferroelectric materials such as lead zirconate titanate so called PZT ceramics. Ceramic piezoelectric materials can be processed by methods widely applied for standard ceramics, i.e. starting from simple precursors e.g. oxides. Application of sol-gel method has also been reported. Substantial drawback for many applications of piezoelectric ceramics is their brittleness, thus much effort is currently being put in the development of piezoelectric composite materials. Other important research directions in the field of ceramic piezoelectric materials composite development of lead free materials, which can exhibit properties similar to the PZT ceramics. Among other directions one has to state processing of single crystals and materials having texture or gradient structure. (author)

Materials Genome Initiative

Science.gov (United States)

Vickers, John

2015-01-01

The Materials Genome Initiative (MGI) project element is a cross-Center effort that is focused on the integration of computational tools to simulate manufacturing processes and materials behavior. These computational simulations will be utilized to gain understanding of processes and materials behavior to accelerate process development and certification to more efficiently integrate new materials in existing NASA projects and to lead to the design of new materials for improved performance. This NASA effort looks to collaborate with efforts at other government agencies and universities working under the national MGI. MGI plans to develop integrated computational/experimental/ processing methodologies for accelerating discovery and insertion of materials to satisfy NASA's unique mission demands. The challenges include validated design tools that incorporate materials properties, processes, and design requirements; and materials process control to rapidly mature emerging manufacturing methods and develop certified manufacturing processes

Comprehensive nuclear materials

CERN Document Server

Allen, Todd; Stoller, Roger; Yamanaka, Shinsuke

2012-01-01

Comprehensive Nuclear Materials encapsulates a panorama of fundamental information on the vast variety of materials employed in the broad field of nuclear technology. The work addresses, in five volumes, 3,400 pages and over 120 chapter-length articles, the full panorama of historical and contemporary international research in nuclear materials, from Actinides to Zirconium alloys, from the worlds' leading scientists and engineers. It synthesizes the most pertinent research to support the selection, assessment, validation and engineering of materials in extreme nuclear environments. The work discusses the major classes of materials suitable for usage in nuclear fission, fusion reactors and high power accelerators, and for diverse functions in fuels, cladding, moderator and control materials, structural, functional, and waste materials.

Advanced energy materials

CERN Document Server

Tiwari, Ashutosh

2014-01-01

An essential resource for scientists designing new energy materials for the vast landscape of solar energy conversion as well as materials processing and characterization Based on the new and fundamental research on novel energy materials with tailor-made photonic properties, the role of materials engineering has been to provide much needed support in the development of photovoltaic devices. Advanced Energy Materials offers a unique, state-of-the-art look at the new world of novel energy materials science, shedding light on the subject's vast multi-disciplinary approach The book focuses p

Advancing materials research

International Nuclear Information System (INIS)

Langford, H.D.; Psaras, P.A.

1987-01-01

The topics discussed in this volume include historical perspectives in the fields of materials research and development, the status of selected scientific and technical areas, and current topics in materials research. Papers are presentd on progress and prospects in metallurgical research, microstructure and mechanical properties of metals, condensed-matter physics and materials research, quasi-periodic crystals, and new and artifically structured electronic and magnetic materials. Consideration is also given to materials research in catalysis, advanced ceramics, organic polymers, new ways of looking at surfaces, and materials synthesis and processing

Heterogeneous Materials I and Heterogeneous Materials II

International Nuclear Information System (INIS)

Knowles, K M

2004-01-01

In these two volumes the author provides a comprehensive survey of the various mathematically-based models used in the research literature to predict the mechanical, thermal and electrical properties of hetereogeneous materials, i.e., materials containing two or more phases such as fibre-reinforced polymers, cast iron and porous ceramic kiln furniture. Volume I covers linear properties such as linear dielectric constant, effective electrical conductivity and elastic moduli, while Volume II covers nonlinear properties, fracture and atomistic and multiscale modelling. Where appropriate, particular attention is paid to the use of fractal geometry and percolation theory in describing the structure and properties of these materials. The books are advanced level texts reflecting the research interests of the author which will be of significant interest to research scientists working at the forefront of the areas covered by the books. Others working more generally in the field of materials science interested in comparing predictions of properties with experimental results may well find the mathematical level quite daunting initially, as it is apparent that the author assumes a level of mathematics consistent with that taught in final year undergraduate and graduate theoretical physics courses. However, for such readers it is well worth persevering because of the in-depth coverage to which the various models are subjected, and also because of the extensive reference lists at the back of both volumes which direct readers to the various source references in the scientific literature. Thus, for the wider materials science scientific community the two volumes will be a valuable library resource. While I would have liked to see more comparison with experimental data on both ideal and 'real' heterogeneous materials than is provided by the author and a discussion of how to model strong nonlinear current--voltage behaviour in systems such as zinc oxide varistors, my overall

Generation of charged particles on the Sun on Jule 22, 1972

International Nuclear Information System (INIS)

Grigor'eva, V.P.; Kudryavtsev, M.V.; Kurt, V.G.

1974-01-01

The increase in the intensity of solar cosmic ray electrons and electromagnetic radiation bursts measured by means of Earth artificial satellites 'Prognoz-1' and 'Prognoz-2' on July 22, 1972 are examined. It is shown that the optical flare occured behind the west solar limb and that the shock wave generated by the flare caused an additional acceleration of charged particles in the region distant from the main flare location

Astronaut Voss Works in the Destiny Laboratory

Science.gov (United States)

2001-01-01

In this photograph, Astronaut James Voss, flight engineer of Expedition Two, performs a task at a work station in the International Space Station (ISS) Destiny Laboratory, or U.S. Laboratory, as Astronaut Scott Horowitz, STS-105 mission commander, floats through the hatchway leading to the Unity node. After spending five months aboard the orbital outpost, the ISS Expedition Two crew was replaced by Expedition Three and returned to Earth aboard the STS-105 Space Shuttle Discovery on August 22, 2001. The Orbiter Discovery was launched from the Kennedy Space Center on August 10, 2001.

Santiago H. Valdés, Psicología social : Prolam S. R. L., Colección Ciencias Sociales, Buenos Aires, 1979

OpenAIRE

Rossi Casé, Lilia Elba

1981-01-01

Esta nueva obra de Santiago H. Valdés nos ofrece un panorama considerablemente completo del área que ocupa a la Psicología Social. Su lectura permite en una primera parte, un acercamiento a temas tales cómo la evolución y búsqueda de la Psicología Social, comenzando con un desarrollo acerca de las Ciencias Sociales en general, consideradas por diversos autores, entre ellos Adam Smith, Comte, Max Weber, Durkheim, Horowitz, Hilgard, etc. Luego se adentra en et análisis de la socialización, el l...

Moderator material for neutrons and use of said material

International Nuclear Information System (INIS)

Hiismaeki, P.; Auterinen, I.

1994-01-01

The invention concerns a moderator material used for mediation of high-velocity neutrons, in particular of fission neutrons, to epithermal neutrons. The principal components of the moderator material are aluminum fluoride and aluminum metal, which have been formed into a dense composite substantially free of pores, wherein the material contains 20-50 percent-vol. of aluminum metal and 80-50 percent-vol. aluminum fluoride. Further, the use of the moderator material in accordance with the invention in neutron capture therapy of cancer tumours is described, such as in boron neutron capture therapy (BNCT)

Production of a calcium silicate cement material from alginate impression material.

Science.gov (United States)

Washizawa, Norimasa; Narusawa, Hideaki; Tamaki, Yukimichi; Miyazaki, Takashi

2012-01-01

The purpose of this study was to synthesize biomaterials from daily dental waste. Since alginate impression material contains silica and calcium salts, we aimed to synthesize calcium silicate cement from alginate impression material. Gypsum-based investment material was also investigated as control. X-ray diffraction analyses revealed that although firing the set gypsum-based and modified investment materials at 1,200°C produced calcium silicates, firing the set alginate impression material did not. However, we succeeded when firing the set blend of pre-fired set alginate impression material and gypsum at 1,200°C. SEM observations of the powder revealed that the featured porous structures of diatomite as an alginate impression material component appeared useful for synthesizing calcium silicates. Experimentally fabricated calcium silicate powder was successfully mixed with phosphoric acid solution and set by depositing the brushite. Therefore, we conclude that the production of calcium silicate cement material is possible from waste alginate impression material.

Nondestructive materials characterization with applications to aerospace materials

CERN Document Server

Nagy, Peter; Rokhlin, Stanislav

2004-01-01

With an emphasis on aircraft materials, this book describes techniques for the material characterization to detect and quantify degradation processes such as corrosion and fatigue. It introduces readers to these techniques based on x-ray, ultrasonic, optical and thermal principles and demonstrates the potential of the techniques for a wide variety of applications concerning aircraft materials, especially aluminum and titanium alloys. The advantages and disadvantages of various techniques are evaluated. An introductory chapter describes the typical degradation mechanisms that must be considered and the microstructure features that have to be detected by NDE methods. Finally, some approaches for making lifetime predictions are discussed. It is suitable as a textbook in special training courses in advanced NDE and aircraft materials characterization.

Matter and materials

International Nuclear Information System (INIS)

Lefevre, J.

1997-01-01

This paper is an introduction to the materials used in nuclear engineering from the uranium (extraction, processing, ultimate use) to all radioactive products encountered in nuclear processes and more particularly those having particular applications or presenting particular risks in their ultimate disposal. This introduction gives a general presentation of the different topics which are developed in other chapters: nuclear materials and fuel cycle (fuel fabrication, actinides and recycling, direct storage and reprocessing of spent fuels, management of radioactive wastes, transport of radioactive materials, production and use of radioelements in the industry and medicine), moderators and coolants, other materials used in reactors (fuel cladding materials, special steels, zircaloy, neutron absorbent materials), and the mechanical behaviour of materials (steels, concretes). (J.S.)

[Psychology, psychiatry and oncology: recent and future findings].

Science.gov (United States)

Razavi, D

2006-01-01

There is an important development of research at the interface of psychology, psychiatry and oncology. There are now precise knowledges about assessment and type of difficulties experimented by patients and their significant others. The content of psychological interventions needed to optimize quality of care is starting to be better defined. All this has certainly allowed the development of "psycho-oncology" as a new discipline. Our experience at the Jules Bordet Institute, Cancer Center of the University of Brussels, will be reported in this paper.

Howard Hughes and the Cold War Aviation Film Jet Pilot (1957

Directory of Open Access Journals (Sweden)

Richard Andrew Voeltz

2016-10-01

War.  But sexual intimacy, conspicuous consumption, and aviation technology also inserted themselves into the perfect safetly of American domestic bliss. This paper will analyze how the eccentric Cold War romantic comedy Jet Pilot (1957 so associated with the compulsiveness of Howard Hughes, produced and written by Jules Furthman, directed ( partially by Josef von Sternburg and starring John Wayne and Janet Leigh, reflects all these themes making it the paradigmatic Cold Film that remains a camp classic from the American popular cultyre of the 1950s.

Uranium reference materials

International Nuclear Information System (INIS)

Donivan, S.; Chessmore, R.

1987-07-01

The Technical Measurements Center has prepared uranium mill tailings reference materials for use by remedial action contractors and cognizant federal and state agencies. Four materials were prepared with varying concentrations of radionuclides, using three tailings materials and a river-bottom soil diluent. All materials were ground, dried, and blended thoroughly to ensure homogeneity. The analyses on which the recommended values for nuclides in the reference materials are based were performed, using independent methods, by the UNC Geotech (UNC) Chemistry Laboratory, Grand Junction, Colorado, and by C.W. Sill (Sill), Idaho National Engineering Laboratory, Idaho Falls, Idaho. Several statistical tests were performed on the analytical data to characterize the reference materials. Results of these tests reveal that the four reference materials are homogeneous and that no large systematic bias exists between the analytical methods used by Sill and those used by TMC. The average values for radionuclides of the two data sets, representing an unbiased estimate, were used as the recommended values for concentrations of nuclides in the reference materials. The recommended concentrations of radionuclides in the four reference materials are provided. Use of these reference materials will aid in providing uniform standardization among measurements made by remedial action contractors. 11 refs., 9 tabs

Reactor core materials research and integrated material database establishment

International Nuclear Information System (INIS)

Ryu, Woo Seog; Jang, J. S.; Kim, D. W.

2002-03-01

Mainly two research areas were covered in this project. One is to establish the integrated database of nuclear materials, and the other is to study the behavior of reactor core materials, which are usually under the most severe condition in the operating plants. During the stage I of the project (for three years since 1999) in- and out of reactor properties of stainless steel, the major structural material for the core structures of PWR (Pressurized Water Reactor), were evaluated and specification of nuclear grade material was established. And the damaged core components from domestic power plants, e.g. orifice of CVCS, support pin of CRGT, etc. were investigated and the causes were revealed. To acquire more resistant materials to the nuclear environments, development of the alternative alloys was also conducted. For the integrated DB establishment, a task force team was set up including director of nuclear materials technology team, and projector leaders and relevant members from each project. The DB is now opened in public through the Internet

Absorbent material for type a radioactive materials packaging containing liquids

International Nuclear Information System (INIS)

Saunders, G.A.

1989-11-01

The application of absorbent materials to the packaging and transport of liquid radioactive materials in Type A packages has not been reported in the literature. However, a significant body of research exists on absorbent materials for personal hygiene products such as diapers. Absorption capacity is dependent on both the absorbent material and the liquid being absorbed. Theoretical principles for capillary absorption in both the horizontal and the vertical plane indicate that small contact angle between the absorbent fibre and the liquid, and a small inter-fibre pore size are important. Some fluid parameters such as viscosity affect the rate of absorption but not the final absorption capacity. There appears to be little comparability between results obtained for the same absorbent and fluid using different test procedures. Test samples of materials from several classes of potential absorbents have been evaluated in this study, and shown to have a wide range of absorbent capacities. Foams, natural fibres, artificial fibres and granular materials are all potentially useful absorbents, with capacities ranging from as little as 0.86 to as much as 40.6 grams of distilled water per gram of absorbent. Two experimental procedures for evaluating the absorbent capacity of these materials have been detailed in this report, and found suitable for evaluating granular, fibrous or foam materials. Compression of the absorbent material reduces its capacity, but parameters such as relative humidity, pH, temperature, and viscosity appear to have little significant influence on capacity. When the materials were loaded to 50% of their one-minute absorbency, subsequent loss of the absorbed liquid was generally minimal. All of the absorbent materials rapidly lost their absorbed water through evaporation within twenty-four hours in still air at 21 degrees C and 50% relative humidity

Computational materials design

International Nuclear Information System (INIS)

Snyder, R.L.

1999-01-01

Full text: Trial and error experimentation is an extremely expensive route to the development of new materials. The coming age of reduced defense funding will dramatically alter the way in which advanced materials have developed. In the absence of large funding we must concentrate on reducing the time and expense that the R and D of a new material consumes. This may be accomplished through the development of computational materials science. Materials are selected today by comparing the technical requirements to the materials databases. When existing materials cannot meet the requirements we explore new systems to develop a new material using experimental databases like the PDF. After proof of concept, the scaling of the new material to manufacture requires evaluating millions of parameter combinations to optimize the performance of the new device. Historically this process takes 10 to 20 years and requires hundreds of millions of dollars. The development of a focused set of computational tools to predict the final properties of new materials will permit the exploration of new materials systems with only a limited amount of materials characterization. However, to bound computational extrapolations, the experimental formulations and characterization will need to be tightly coupled to the computational tasks. The required experimental data must be obtained by dynamic, in-situ, very rapid characterization. Finally, to evaluate the optimization matrix required to manufacture the new material, very rapid in situ analysis techniques will be essential to intelligently monitor and optimize the formation of a desired microstructure. Techniques and examples for the rapid real-time application of XRPD and optical microscopy will be shown. Recent developments in the cross linking of the world's structural and diffraction databases will be presented as the basis for the future Total Pattern Analysis by XRPD. Copyright (1999) Australian X-ray Analytical Association Inc

Chemical reactor for converting a first material into a second material

Science.gov (United States)

Kong, Peter C

2012-10-16

A chemical reactor and method for converting a first material into a second material is disclosed and wherein the chemical reactor is provided with a feed stream of a first material which is to be converted into a second material; and wherein the first material is combusted in the chemical reactor to produce a combustion flame, and a resulting gas; and an electrical arc is provided which is passed through or superimposed upon the combustion flame and the resulting gas to facilitate the production of the second material.

Tritium breeding materials

International Nuclear Information System (INIS)

Hollenberg, G.W.; Johnson, C.E.; Abdou, M.

1984-03-01

Tritium breeding materials are essential to the operation of D-T fusion facilities. Both of the present options - solid ceramic breeding materials and liquid metal materials are reviewed with emphasis not only on their attractive features but also on critical materials issues which must be resolved

Tritium breeding materials

International Nuclear Information System (INIS)

Hollenberg, G.W.; Johnson, C.E.; Abdou, M.A.

1984-01-01

Tritium breeding materials are essential to the operation of D-T fusion facilities. Both of the present options - solid ceramic breeding materials and liquid metal materials are reviewed with emphasis not only on their attractive features but also on critical materials issues which must be resolved

Materials Science | NREL

Science.gov (United States)

microscopy and imaging science, interfacial and surface science, materials discovery, and thin-film material Science Materials Science Illustration with bottom row showing a ball-and-stick model and top row dense black band. State-of-the-art advances in materials science come from a combination of experiments

Materials of 13. conference: ATM'92 - Advanced materials and technologies

International Nuclear Information System (INIS)

1992-01-01

13th conference on metal science, modern materials and technologies (ATM'92) has been held in Popowo near Warsaw, Poland in September 1992. The conference has been divided into 9 sections. There are: Plenary section (7 lectures); Functional materials (12 lectures); Methods of material microstructure shaping (5 lectures and 14 posters); Surface engineering (5 lectures and 27 posters); Composites (5 lectures and 9 posters); Iron alloys A (7 lectures and 8 posters); Iron alloys B (7 lectures and 18 posters); Non-ferrous metal alloys (7 lectures and 11 posters) and Methods for materials research (5 lectures and 23 posters). The new materials preparation, their properties and structure as well as a methods for obtaining a desirable properties of material or their surface have been broadly referred and discussed

A routine chromium determination in biological materials; application to various reference materials and standard reference materials

International Nuclear Information System (INIS)

Tjioe, P.S.; Goeij, J.J.M. de; Volkers, K.J.

1979-01-01

The determination limit under standard working conditions of chromium in biological materials is discussed. Neutron activation analysis and atomic spectrometry have been described for some analytical experiences with NBS SRM 1577 reference material. The chromium determination is a part of a larger multi-element scheme for the determination of 12 elements in biological materials

Material Programming

DEFF Research Database (Denmark)

Vallgårda, Anna; Boer, Laurens; Tsaknaki, Vasiliki

2017-01-01

. Consequently we ask what the practice of programming and giving form to such materials would be like? How would we be able to familiarize ourselves with the dynamics of these materials and their different combinations of cause and effect? Which tools would we need and what would they look like? Will we program......, and color, but additionally being capable of sensing, actuating, and computing. Indeed, computers will not be things in and by themselves, but embedded into the materials that make up our surroundings. This also means that the way we interact with computers and the way we program them, will change...... these computational composites through external computers and then transfer the code them, or will the programming happen closer to the materials? In this feature we outline a new research program that floats between imagined futures and the development of a material programming practice....

Materials characterisation

International Nuclear Information System (INIS)

Azali Muhammad

2005-01-01

Various nuclear techniques have been developed and employed by technologies and scientists worldwide to physically and chemically characterise the material particularly those that have applications in industry. These include small angle neutron scattering (SANS), x-ray diffraction (XRD), scanning electron microscope (SEM) and transmission electron microscope (TEM) for the internal structural study of material, whereas, the x-ray fluorescence (XRF) for the chemical analysis, while the Moessbauer spectroscopy for the study on the magnetic properties and structural identity of material. Basic principle and instrumentations of the techniques are discussed in this chapter. Example of their applications in various disciplines particularly in characterisation of industrial materials also described

Materials And Processes Technical Information System (MAPTIS) LDEF materials data base

Science.gov (United States)

Funk, Joan G.; Strickland, John W.; Davis, John M.

1993-01-01

A preliminary Long Duration Exposure Facility (LDEF) Materials Data Base was developed by the LDEF Materials Special Investigation Group (MSIG). The LDEF Materials Data Base is envisioned to eventually contain the wide variety and vast quantity of materials data generated from LDEF. The data is searchable by optical, thermal, and mechanical properties, exposure parameters (such as atomic oxygen flux) and author(s) or principal investigator(s). Tne LDEF Materials Data Base was incorporated into the Materials and Processes Technical Information System (MAPTIS). MAPTIS is a collection of materials data which has been computerized and is available to engineers, designers, and researchers in the aerospace community involved in the design and development of spacecraft and related hardware. The LDEF Materials Data Base is described and step-by-step example searches using the data base are included. Information on how to become an authorized user of the system is included.

Superconducting composites materials

International Nuclear Information System (INIS)

Kerjouan, P.; Boterel, F.; Lostec, J.; Bertot, J.P.; Haussonne, J.M.

1991-01-01

The new superconductor materials with a high critical current own a large importance as well in the electronic components or in the electrotechnical devices fields. The deposit of such materials with the thick films technology is to be more and more developed in the years to come. Therefore, we tried to realize such thick films screen printed on alumina, and composed mainly of the YBa 2 Cu 3 O 7-δ material. We first realized a composite material glass/YBa 2 Cu 3 O 7-δ , by analogy with the classical screen-printed inks where the glass ensures the bonding with the substrate. We thus realized different materials by using some different classes of glass. These materials owned a superconducting transition close to the one of the pure YBa 2 Cu 3 O 7-δ material. We made a slurry with the most significant composite materials and binders, and screen-printed them on an alumina substrate preliminary or not coated with a diffusion barrier layer. After firing, we studied the thick films adhesion, the alumina/glass/composite material interfaces, and their superconducting properties. 8 refs.; 14 figs.; 9 tabs [fr

Materials by design

International Nuclear Information System (INIS)

Eberhardt, J.; Hay, P.J.; Carpenter, J.A. Jr.

1986-01-01

Major developments in materials characterization instrumentation over the past decade have helped significantly to elucidate complex processes and phenomena connected with the microstructure of materials and interfacial interactions. Equally remarkable advances in theoretical models and computer technology also have been taking place during this period. These latter now permit, for example, in selected cases the computation of material structures and bonding and the prediction of some material properties. Two assessments of the state of the art of instrumental techniques and theoretical methods for the study of material structures and properties have recently been conducted. This paper discusses aspects from these assessments of computational theoretical methods apply to materials

Atomistic Simulations of Small-scale Materials Tests of Nuclear Materials

International Nuclear Information System (INIS)

Shin, Chan Sun; Jin, Hyung Ha; Kwon, Jun Hyun

2012-01-01

Degradation of materials properties under neutron irradiation is one of the key issues affecting the lifetime of nuclear reactors. Evaluating the property changes of materials due to irradiations and understanding the role of microstructural changes on mechanical properties are required for ensuring reliable and safe operation of a nuclear reactor. However, high dose of neuron irradiation capabilities are rather limited and it is difficult to discriminate various factors affecting the property changes of materials. Ion beam irradiation can be used to investigate radiation damage to materials in a controlled way, but has the main limitation of small penetration depth in the length scale of micro meters. Over the past decade, the interest in the investigations of size-dependent mechanical properties has promoted the development of various small-scale materials tests, e.g. nanoindentation and micro/nano-pillar compression tests. Small-scale materials tests can address the issue of the limitation of small penetration depth of ion irradiation. In this paper, we present small-scale materials tests (experiments and simulation) which are applied to study the size and irradiation effects on mechanical properties. We have performed molecular dynamics simulations of nanoindentation and nanopillar compression tests. These atomistic simulations are expected to significantly contribute to the investigation of the fundamental deformation mechanism of small scale irradiated materials

In-plane Material Filters for the Discrete Material Optimization Method

DEFF Research Database (Denmark)

Sørensen, Rene; Lund, Erik

2015-01-01

, because the projection filter is a non-linear function of the design variables, the projected variables have to be re-scaled in a final so-called normalization filter. This is done to prevent the optimizer in creating superior, but non-physical pseudo-materials. The method is demonstrated on a series......This paper presents in-plane material filters for the Discrete Material Optimization method used for optimizing laminated composite structures. The filters make it possible for engineers to specify a minimum length scale which governs the minimum size of areas with constant material continuity....... Consequently, engineers can target the available production methods, and thereby increase its manufacturability while the optimizer is free to determine which material to apply together with an optimum location, shape, and size of these areas with constant material continuity. By doing so, engineers no longer...

Device for separating, purifying and recovering nuclear fuel material, impurities and materials from impurity-containing nuclear fuel materials or nuclear fuel containing material

International Nuclear Information System (INIS)

Sato, Ryuichi; Kamei, Yoshinobu; Watanabe, Tsuneo; Tanaka, Shigeru.

1988-01-01

Purpose: To separate, purify and recover nuclear fuel materials, impurities and materials with no formation of liquid wastes. Constitution: Oxidizing atmosphere gases are introduced from both ends of a heating furnace. Vessels containing impurity-containing nuclear fuel substances or nuclear fuel substance-containing material are continuously disposed movably from one end to the other of the heating furnace. Then, impurity oxides or material oxides selectively evaporated from the impurity-containing nuclear fuel substances or nuclear fuel substance-containing materials are entrained in the oxidizing atmosphere gas and the gases are led out externally from a discharge port opened at the intermediate portion of the heating furnace, filters are disposed to the exit to solidify and capture the nuclear fuel substances and traps are disposed behind the filters to solidify and capture the oxides by spontaneous air cooling or water cooling. (Sekiya, K.)

Articulating Material Criteria

DEFF Research Database (Denmark)

Hasling, Karen Marie

2013-01-01

, imitate and articulate the students’ inclusion of materials. This paper particularly discusses the experiences made and ideas generated after the execution of a material science course for second year students, with emphasis on the concept of the material selection matrix as an educational tool......This paper discusses the experiences and potentials with materials teaching at the Institute for Product Design at Kolding School of Design, using materials teaching as experiments in my PhD project. The project intents to create a stronger material awareness among product design students...... with emphasis on sustainability. The experiments aim to develop an understanding of, how product design students include materials in their design practice and how tools can be developed that further enhance this. Hence experiments are essential for the progress of the PhD project as they help to observe...

Multicomponent polymeric materials

CERN Document Server

Thomas, Sabu; Saha, Prosenjit

2016-01-01

The book offers an in-depth review of the materials design and manufacturing processes employed in the development of multi-component or multiphase polymer material systems. This field has seen rapid growth in both academic and industrial research, as multiphase materials are increasingly replacing traditional single-component materials in commercial applications. Many obstacles can be overcome by processing and using multiphase materials in automobile, construction, aerospace, food processing, and other chemical industry applications. The comprehensive description of the processing, characterization, and application of multiphase materials presented in this book offers a world of new ideas and potential technological advantages for academics, researchers, students, and industrial manufacturers from diverse fields including rubber engineering, polymer chemistry, materials processing and chemical science. From the commercial point of view it will be of great value to those involved in processing, optimizing an...

Material characterization models and test methods for historic building materials

DEFF Research Database (Denmark)

Hansen, Tessa Kvist; Peuhkuri, Ruut Hannele; Møller, Eva B.

2017-01-01

Predictions of long term hygrothermal performance can be assessed by dynamic hygrothermal simulations, in which material parameters are crucial input. Material parameters for especially historic materials are often unknown; therefore, there is a need to determine important parameters, and simple...

Structural characterization of amorphous materials applied to low-k organosilicate materials

Energy Technology Data Exchange (ETDEWEB)

Raymunt, Alexandra Cooper, E-mail: amc442@cornell.edu; Clancy, Paulette

2014-07-01

We present a methodology to create computational atomistic-level models of porous amorphous materials, in particular, an organosilicate structure for ultra-low dielectric constant (ULK) materials known as “SiCOH.” The method combines the ability to satisfy geometric and chemical constraints with subsequent molecular dynamics (MD) techniques as a way to capture the complexities of the porous and amorphous nature of these materials. The motivation for studying ULK materials arises from a desire to understand the origin of the material's weak mechanical properties. The first step towards understanding how these materials might behave under processing conditions that are intended to improve their mechanical properties is to develop a suitable computational model of the material and hence is the focus of this paper. We define the atomic-scale topology of ULK materials that have been produced by chemical vapor deposition-like experimental techniques. Specifically, we have developed a method of defining the initial atom configurations and interactions, as well as a method to rearrange these starting configurations into relaxed structures. The main advantage of our described approach is the ability of our structure generation method to maintain a random distribution of relevant structural motifs throughout the structure, without relying on large unit cells and periodic boundaries to approximate the behavior of this complex material. The minimization of the different models was accomplished using replica exchange molecular dynamics (REMD). Following the generation of the ‘equilibrium’ configurations that result from REMD for a ULK material of a pre-specified composition, we demonstrate that its structural properties, including bonding topology, porosity and pore size distribution are similar to experimentally used ULK materials. - Highlights: • Method for creating a model of a low dielectric constant organosilicate material • Method of defining porosity in

Materializing Ethnography

OpenAIRE

Geismar, H.; Horst, H. A.

2004-01-01

The articles in this volume were originally presented in a panel entitled ‘Material Methodologies’ at the American Anthropological Association meeting in New Orleans (November 2002). The panel was devised to tie together theoretical advances in the study of the material with the creative possibilities of fieldwork practices. Through detailed ethnographic discussion, we highlighted the ways in which a focus on a specifically material world enabled us to discover new perspecti...

Theoretical backgrounds of non-tempered materials production based on new raw materials

Science.gov (United States)

Lesovik, V. S.; Volodchenko, A. A.; Glagolev, E. S.; Chernysheva, N. V.; Lashina, I. V.; Feduk, R. S.

2018-03-01

One of the trends in construction material science is development and implementation of highly effective finish materials which improve architectural exterior of cities. Silicate materials widely-used in the construction today have rather low decorative properties. Different coloring agents are used in order to produce competitive materials, but due to the peculiarities of the production, process very strict specifications are applied to them. The use of industrial wastes or variety of rock materials as coloring agents is of great interest nowadays. The article shows that clay rock can be used as raw material in production of finish materials of non-autoclaved solidification. This raw material due to its material composition actively interacts with cementing component in steam treatment at 90–95 °C with formation of cementing joints that form a firm coagulative-cristalized and crystallization structure of material providing high physic-mechanical properties of silicate goods. It is determined that energy-saving, colored finish materials with compression strength up to 16 MPa can be produced from clay rocks.

Phase-change materials handbook

Science.gov (United States)

Hale, D. V.; Hoover, M. J.; Oneill, M. J.

1972-01-01

Handbook describes relationship between phase-change materials and more conventional thermal control techniques and discusses materials' space and terrestrial applications. Material properties of most promising phase-change materials and purposes and uses of metallic filler materials in phase-change material composites are provided.

Comprehensive hard materials

CERN Document Server

2014-01-01

Comprehensive Hard Materials deals with the production, uses and properties of the carbides, nitrides and borides of these metals and those of titanium, as well as tools of ceramics, the superhard boron nitrides and diamond and related compounds. Articles include the technologies of powder production (including their precursor materials), milling, granulation, cold and hot compaction, sintering, hot isostatic pressing, hot-pressing, injection moulding, as well as on the coating technologies for refractory metals, hard metals and hard materials. The characterization, testing, quality assurance and applications are also covered. Comprehensive Hard Materials provides meaningful insights on materials at the leading edge of technology. It aids continued research and development of these materials and as such it is a critical information resource to academics and industry professionals facing the technological challenges of the future. Hard materials operate at the leading edge of technology, and continued res...

Strategic Materials

National Research Council Canada - National Science Library

Buhler, Carl; Burke, Adrian; Davis, Kirk; Gerhard, Michelle; Heil, Valerie; Hulse, Richard; Kwong, Ralph; Mahoney, Michael; Moran, Scott; Peek, Michael

2006-01-01

Some materials possess greater value than others. Materials that provide essential support for the nation's economic viability or enable critical military capabilities warrant special attention in security studies...

Information perception, wishes, and satisfaction in ambulatory cancer patients under active treatment: patient-reported outcomes with QLQ-INFO25

Science.gov (United States)

Pinto, Ana Catarina; Ferreira-Santos, Fernando; Lago, Lissandra Dal; de Azambuja, Evandro; Pimentel, Francisco Luís; Piccart-Gebhart, Martine; Razavi, Darius

2014-01-01

Background Information is vital to cancer patients. Physician–patient communication in oncology presents specific challenges. The aim of this study was to evaluate self-reported information of cancer patients in ambulatory care at a comprehensive cancer centre and examine its possible association with patients’ demographic and clinical characteristics. Patients and methods This study included adult patients with solid tumours undergoing chemotherapy at the Institute Jules Bordet’s Day Hospital over a ten-day period. EORTC QLQ-C30 and QLQ-INFO25 questionnaires were administered. Demographic and clinical data were collected. Descriptive and inferential statistics were used. Results 101 (99%) fully completed the questionnaires. They were mostly Belgian (74.3%), female (78.2%), with a mean age of 56.9 ± 12.8 years. The most frequent tumour was breast cancer (58.4%). Patients were well-informed about the disease and treatments, but presented unmet information domains. The Jules Bordet patients desired more information on treatment side effects, long-term outcome, nutrition, and recurrence symptoms. Patients on clinical trials reported having received less information about their disease and less written information than patients outside clinical trials. Higher information levels were associated with higher quality of life (QoL) scores and higher patient satisfaction. Conclusion Patients were satisfied with the information they received and this correlated with higher QoL, but they still expressed unmet information wishes. Additional studies are required to investigate the quality of the information received by patients enrolled in clinical trials. PMID:24834120

Boron carbide-coated carbon material, manufacturing method therefor and plasma facing material

International Nuclear Information System (INIS)

Suzuki, Takayuki; Kikuchi, Yoshihiro; Hyakki, Yasuo.

1997-01-01

The present invention concerns a plasma facing material suitable to a thermonuclear device. The material comprises a carbon material formed by converting the surface of a carbon fiber-reinforced carbon material comprising a carbon matrix and carbon fibers to a boron carbide, the material has a surface comprising vertically or substantially vertically oriented carbon fibers, and the thickness of the surface converted to boron carbide is reduced in the carbon fiber portion than in the carbon matrix portion. Alternatively, a carbon fiber-reinforced carbon material containing carbon fibers having a higher graphitizing degree than the carbon matrix is converted to boron carbide on the surface where the carbon fibers are oriented vertically or substantially vertically. The carbon fiber-reinforced material is used as a base material, and a resin material impregnated into a shaped carbon fiber product is carbonized or thermally decomposed carbon is filled as a matrix. The material of the present invention has high heat conduction and excellent in heat resistance thereby being suitable to a plasma facing material for a thermonuclear device. Electric specific resistivity of the entire coating layer can be lowered, occurrence of arc discharge is prevented and melting can be prevented. (N.H.)

Waste Material Management: Energy and materials for industry

Energy Technology Data Exchange (ETDEWEB)

1993-05-01

This booklet describes DOE`s Waste Material Management (WMM) programs, which are designed to help tap the potential of waste materials. Four programs are described in general terms: Industrial Waste Reduction, Waste Utilization and Conversion, Energy from Municipal Waste, and Solar Industrial Applications.

Composite Materials

DEFF Research Database (Denmark)

Nielsen, Lauge Fuglsang

This book deals with the mechanical and physical behavior of composites as influenced by composite geometry. "Composite Materials" provides a comprehensive introduction for researchers and students to modern composite materials research with a special emphasis on the significance of phase geometry......, viscoelastic behavior, and internal stress states. Other physical properties considered are thermal and electrical conductivities, diffusion coefficients, dielectric constants and magnetic permeability. Special attention is given to the effect of pore shape on the mechanical and physical behavior of porous....... The book enables the reader to a better understanding of the behavior of natural composites, improvement of such materials, and design of new materials with prescribed properties. A number of examples are presented: Special composite properties considered are stiffness, shrinkage, hygro-thermal behavior...

Nano Materials

International Nuclear Information System (INIS)

Jin, In Ju; Lee, Ik Mo; Kwon, Yeung Gu

2006-02-01

This book introduces background of nano science such as summary, plenty room at the bottom, access way to nano technique, nanoparticles using bottom-up method which are a marvel of nature, and modern alchemy : chemical synthesis of artificial nano structure, understanding of quantum mechanics, STM/AFM, nano metal powder, ceramic nanoparticles, nano structure film, manufacture of nanoparticles using reverse micelle method, carbon nano tube, sol-gel material, nano energy material, nano catalyst nano bio material technology and spintronics.

Materials science and architecture

Science.gov (United States)

Bechthold, Martin; Weaver, James C.

2017-12-01

Materiality — the use of various materials in architecture — has been fundamental to the design and construction of buildings, and materials science has traditionally responded to needs formulated by design, engineering and construction professionals. Material properties and processes are shaping buildings and influencing how they perform. The advent of technologies such as digital fabrication, robotics and 3D printing have not only accelerated the development of new construction solutions, but have also led to a renewed interest in materials as a catalyst for novel architectural design. In parallel, materials science has transformed from a field that explains materials to one that designs materials from the bottom up. The conflation of these two trends is giving rise to materials-based design research in which architects, engineers and materials scientists work as partners in the conception of new materials systems and their applications. This Review surveys this development for different material classes (wood, ceramics, metals, concrete, glass, synthetic composites and polymers), with an emphasis on recent trends and innovations.

Multifunctional materials and composites

Science.gov (United States)

Seo, Dong-Kyun; Jeon, Ki-Wan

2017-08-22

Forming multifunctional materials and composites thereof includes contacting a first material having a plurality of oxygen-containing functional groups with a chalcogenide compound, and initiating a chemical reaction between the first material and the chalcogenide compound, thereby replacing oxygen in some of the oxygen-containing functional groups with chalcogen from the chalcogen-containing compound to yield a second material having chalcogen-containing functional groups and oxygen-containing functional groups. The first material is a carbonaceous material or a macromolecular material. A product including the second material is collected and may be processed further to yield a modified product or a composite.

Sea materials experimental plans

International Nuclear Information System (INIS)

1987-07-01

This Seal Materials Performance Test Plan describes the plan for testing materials that will be used to seal a high-level nuclear waste repository in salt at a proposed site in Deaf Smith County, Texas. The need for sealing and backfilling the repository and the use of various sealing materials are described. The seal materials include mined salt backfills, cementitious bulkheads and plugs, and earthen backfills. The laboratory testing program for characterizing the behavior and performance of these materials is described. This report includes plans for screening materials, evaluating candidate materials to be tested, and testing a representative set of materials

Material focus

DEFF Research Database (Denmark)

Sokoler, Tomas; Vallgårda, Anna K. A.

2009-01-01

In this paper we build on the notion of computational composites, which hold a material perspective on computational technology. We argue that a focus on the material aspects of the technology could be a fruitful approach to achieve new expressions and to gain a new view on the technology's role...... in design. We study two of the computer's material properties: computed causality and connectability and through developing two computational composites that utilize these properties we begin to explore their potential expressions....

Material Systems

DEFF Research Database (Denmark)

Jensen, Mads Brath; Mortensen, Henrik Rubæk; Mullins, Michael

2009-01-01

This paper describes and reflects upon the results of an investigative project which explores the setting up of a material system - a parametric and generative assembly consisting of and taking into consideration material properties, manufacturing constraints and geometric behavior. The project...... approaches the subject through the construction of a logic-driven system aiming to explore the possibilities of a material system that fulfills spatial, structural and performative requirements concurrently and how these are negotiated in situations where they might be conflicting....

Contrast Materials

Science.gov (United States)

... is mixed with water before administration liquid paste tablet When iodine-based and barium-sulfate contrast materials ... for patients with kidney failure or allergies to MRI and/or computed tomography (CT) contrast material. Microbubble ...

Theme Enrichment Analysis: A Statistical Test for Identifying Significantly Enriched Themes in a List of Stories with an Application to the Star Trek Television Franchise

OpenAIRE

Onsjö, Mikael; Sheridan, Paul

2017-01-01

In this paper, we describe how the hypergeometric test can be used to determine whether a given theme of interest occurs in a storyset at a frequency more than would be expected by chance. By a storyset we mean simply a list of stories defined according to a common attribute (e.g. author, movement, period). The test works roughly as follows: Given a background storyset (e.g. 19th century adventure novels), and a sub-storyset of interest (e.g. Jules Verne novels), the test determines whether a...

O realismo mágico - uma dimensão da literatura francesa do Século XX

OpenAIRE

Pereira, Maria Eugénia Tavares

2005-01-01

Pierre Mac Orlan, Jules Supervielle, Alain-Fournier, Jean Cocteau, Jean Giono, Marcel Aymé, André Dhôtel, Julien Green, Julien Gracq, Yves Bonnefoy, Michel Tournier foram os autores do século XX que elegemos, de entre muitos outros, para, através da releitura das suas obras – Le Quai des brumes, L’Enfant de la haute mer, Le Grand Meaulnes, Les Enfants terribles, Mort d’un personnage, Le Passe-muraille, Le Pays où l’on n’arrive jamais, Le Visionnaire, Au Château d’Argol, L’Ar...

Revisiting Cotard’s syndrome: illustration of two psychiatric clinical cases

OpenAIRE

Sousa, L; Oliveira, S; Bastos, L

2015-01-01

Introdução: A Síndrome de Cotard (SC) é uma Síndrome neuropsiquiátrica rara e grave, cuja característica central é a existência de delírios niilistas. Tem surgido controvérsia relativamente ao quadro clínico que Jules Cotard descreveu e recentemente têm sido feitas tentativas, não só para clarificar a terminologia utilizada, mas também para definir dife - rentes subtipos desta síndrome e explorar as suas bases biológicas. Objetivos: Rever sumariamente ...

Insulating materials from renewable raw materials. 4. ed.; Daemmstoffe aus nachwachsenden Rohstoffen

Energy Technology Data Exchange (ETDEWEB)

Brandhorst, Joerg; Spritzendorfer, Josef; Gildhorn, Kai; Hemp, Markus

2012-03-27

The thermal insulation has become a central issue in the construction and renovation of buildings. The question of healthy building materials and appropriate construction follows the desire of a comfartable and allergy-free living. Due to these developments, insulation materials from renewable resources increasingly has raised the consciousness. The brochure under consideration describes the dynamic market of insulation materials consisting of renewable raw materials. Wood fibers, wood wool, sheep wool, flax, hemp, reeds, meadow grass, cork, cellulose, seaweed and bulrushes are considered as renewable raw materials for insulating materials.

Fusion Reactor Materials

International Nuclear Information System (INIS)

Decreton, M.

2002-01-01

The objective of SCK-CEN's programme on fusion reactor materials is to contribute to the knowledge on the radiation-induced behaviour of fusion reactor materials and components as well as to help the international community in building the scientific and technical basis needed for the construction of the future reactor. Ongoing projects include: the study of the mechanical and chemical (corrosion) behaviour of structural materials under neutron irradiation and water coolant environment; the investigation of the characteristics of irradiated first wall material such as beryllium; investigations on the management of materials resulting from the dismantling of fusion reactors including waste disposal. Progress and achievements in these areas in 2001 are discussed

Methods of materiality

DEFF Research Database (Denmark)

Aagaard, Jesper; Matthiesen, Noomi Christine Linde

2016-01-01

that researchers should start paying attention to the material world (consisting of both human bodies and material objects) and what it means for how people live their lives. It is argued that this can be done by incorporating the concept of material presence to capture embodied and material layers of existence......This article challenges the hegemonic status of “language” as the primary substance of qualitative research in psychology, whether through interviews or recordings of naturally occurring talk. It thereby questions the overt focus on analyzing linguistic “meaning.” Instead, it is suggested...... practical guidelines for incorporating attention to materiality in qualitative research....

Materials with structural hierarchy

Science.gov (United States)

Lakes, Roderic

1993-01-01

The role of structural hierarchy in determining bulk material properties is examined. Dense hierarchical materials are discussed, including composites and polycrystals, polymers, and biological materials. Hierarchical cellular materials are considered, including cellular solids and the prediction of strength and stiffness in hierarchical cellular materials.

Conducting Polymeric Materials

DEFF Research Database (Denmark)

Hvilsted, Søren

2016-01-01

The overall objective of this collection is to provide the most recent developments within the various areas of conducting polymeric materials. The conductivity of polymeric materials is caused by electrically charged particles, ions, protons and electrons. Materials in which electrons...

Strain-Detecting Composite Materials

Science.gov (United States)

Wallace, Terryl A. (Inventor); Smith, Stephen W. (Inventor); Piascik, Robert S. (Inventor); Horne, Michael R. (Inventor); Messick, Peter L. (Inventor); Alexa, Joel A. (Inventor); Glaessgen, Edward H. (Inventor); Hailer, Benjamin T. (Inventor)

2016-01-01

A composite material includes a structural material and a shape-memory alloy embedded in the structural material. The shape-memory alloy changes crystallographic phase from austenite to martensite in response to a predefined critical macroscopic average strain of the composite material. In a second embodiment, the composite material includes a plurality of particles of a ferromagnetic shape-memory alloy embedded in the structural material. The ferromagnetic shape-memory alloy changes crystallographic phase from austenite to martensite and changes magnetic phase in response to the predefined critical macroscopic average strain of the composite material. A method of forming a composite material for sensing the predefined critical macroscopic average strain includes providing the shape-memory alloy having an austenite crystallographic phase, changing a size and shape of the shape-memory alloy to thereby form a plurality of particles, and combining the structural material and the particles at a temperature of from about 100-700.degree. C. to form the composite material.

Security of material

International Nuclear Information System (INIS)

Nilsson, A.

2001-01-01

Full text: From the early days of discovery and experimentation with nuclear science, nuclear and radioactive materials have held extraordinary potential for being of great benefit to humankind, as well as for causing significant harm. For the past forty years, the IAEA has played an important role in ensuring that nuclear technologies and materials are used only for peaceful purposes. The Agency's safeguards programme has been providing assurances that States honour their undertakings to use nuclear facilities and materials for peaceful purposes only. The potential of nuclear materials and other radioactive materials being used in subversive activities, such as theft, illicit trafficking, sabotage and threats thereof, has been recognized by the international community. The tragic events in New York have given new light to and increased concern for this potential. No target may be considered immune from terrorism. Since 1993, States have confirmed over 370 cases of illicit trafficking. Information is also available on potential attempts of and actual acts of sabotage. For any State, the first step in ensuring the security of their materials is an effective national system. Such a system must contain multiple elements, including physical protection measures, material accountability arrangements, reliable detection capabilities, and plans for rapid and effective response when material is found to be lost, stolen or otherwise not under proper control. The system must also cover illegal waste dumping and other activities that would result in the release of radioactive material into the environment. All these measures should be based on well founded legal and regulatory structures. In many cases, the responsibility for these various elements lies with different bodies, and co-operation between them is vital to the success of the national system. The Agency's programme Security of Material aims at being of service to States in their efforts to upgrade their security

Fusion reactor materials

Energy Technology Data Exchange (ETDEWEB)

none,

1989-01-01

This paper discuses the following topics on fusion reactor materials: irradiation, facilities, test matrices, and experimental methods; dosimetry, damage parameters, and activation calculations; materials engineering and design requirements; fundamental mechanical behavior; radiation effects; development of structural alloys; solid breeding materials; and ceramics.

Fusion reactor materials

International Nuclear Information System (INIS)

1989-01-01

This paper discuses the following topics on fusion reactor materials: irradiation, facilities, test matrices, and experimental methods; dosimetry, damage parameters, and activation calculations; materials engineering and design requirements; fundamental mechanical behavior; radiation effects; development of structural alloys; solid breeding materials; and ceramics

Modern electronic materials

CERN Document Server

Watkins, John B

2013-01-01

Modern Electronic Materials focuses on the development of electronic components. The book first discusses the history of electronic components, including early developments up to 1900, developments up to World War II, post-war developments, and a comparison of present microelectric techniques. The text takes a look at resistive materials. Topics include resistor requirements, basic properties, evaporated film resistors, thick film resistors, and special resistors. The text examines dielectric materials. Considerations include basic properties, evaporated dielectric materials, ceramic dielectri

Nuclear materials

International Nuclear Information System (INIS)

1996-01-01

In 1998, Nuclear Regulatory Authority of the Slovak Republic (NRA SR) performed 38 inspections, 25 of them were performed in co-operation with IAEA inspectors. There is no fresh nuclear fuel at Bohunice A-1 NPP at present. Fresh fuel of Bohunice V-1 and V-2 NPPs is inspected in the fresh fuel storage.There are 327 fresh fuel assemblies in Mochovce NPP fresh fuel storage. In addition to that, are also 71 small users of nuclear materials in Slovakia. In most cases they use: covers made of depleted uranium for non-destructive works, detection of level in production plants, covers for therapeutical sources at medical facilities. In. 1995, NRA SR issued 4 new licences for nuclear material withdrawal. In the next part manipulation with nuclear materials, spent fuel stores and illegal trafficking in nuclear materials are reported

The role of certified reference materials in material control and accounting

International Nuclear Information System (INIS)

Turel, S.P.

1979-01-01

One way of providing an adequate material control and accounting system for the nuclear fuel cycle is to calculate material unaccounted for (MUF) after a physical inventory and to compare the limit of error of the MUF value (LEMUF) against prescribed criteria. To achieve a meaningful LEMUF, a programme for the continuing determination of systematic and random errors is necessary. Within this programme it is necessary to achieve traceability of all Special Nuclear Material (SNM) control and accounting measurements to an International/National Measurement System by means of Certified Reference Materials. SNM measurements for control and accounting are made internationally on a great variety of materials using many diverse measurement procedures by a large number of facilities. To achieve valid overall accountability over this great variety of measurements there must be some means of relating all these measurements and their uncertainties to each other. This is best achieved by an International/National Measurement System (IMS/NMS). To this end, all individual measurement systems must be compatible to the IMS/NMS and all measurement results must be traceable to appropriate international/national Primary Certified Reference Materials. To obtain this necessary compatibility for any given SNM measurement system, secondary certified reference materials or working reference materials are needed for every class of SNM and each type of measurement system. Ways to achieve ''traceability'' and the various types of certified reference material are defined and discussed in this paper. (author)

High temperature materials

International Nuclear Information System (INIS)

2003-01-01

The aim of this workshop is to share the needs of high temperature and nuclear fuel materials for future nuclear systems, to take stock of the status of researches in this domain and to propose some cooperation works between the different research organisations. The future nuclear systems are the very high temperature (850 to 1200 deg. C) gas cooled reactors (GCR) and the molten salt reactors (MSR). These systems include not only the reactor but also the fabrication and reprocessing of the spent fuel. This document brings together the transparencies of 13 communications among the 25 given at the workshop: 1) characteristics and needs of future systems: specifications, materials and fuel needs for fast spectrum GCR and very high temperature GCR; 2) high temperature materials out of neutron flux: thermal barriers: materials, resistance, lifetimes; nickel-base metal alloys: status of knowledge, mechanical behaviour, possible applications; corrosion linked with the gas coolant: knowledge and problems to be solved; super-alloys for turbines: alloys for blades and discs; corrosion linked with MSR: knowledge and problems to be solved; 3) materials for reactor core structure: nuclear graphite and carbon; fuel assembly structure materials of the GCR with fast neutron spectrum: status of knowledge and ceramics and cermets needs; silicon carbide as fuel confinement material, study of irradiation induced defects; migration of fission products, I and Cs in SiC; 4) materials for hydrogen production: status of the knowledge and needs for the thermochemical cycle; 5) technologies: GCR components and the associated material needs: compact exchangers, pumps, turbines; MSR components: valves, exchangers, pumps. (J.S.)

Methodology for Evaluating Raw Material Changes to RSRM Elastomeric Insulation Materials

Science.gov (United States)

Mildenhall, Scott D.; McCool, Alex (Technical Monitor)

2001-01-01

The Reusable Solid Rocket Motor (RSRM) uses asbestos and silicon dioxide filled acrylonitrile butadiene rubber (AS-NBR) as the primary internal insulation to protect the case from heat. During the course of the RSRM Program, several changes have been made to the raw materials and processing of the AS-NBR elastomeric insulation material. These changes have been primarily caused by raw materials becoming obsolete. In addition, some process changes have been implemented that were deemed necessary to improve the quality and consistency of the AS-NBR insulation material. Each change has been evaluated using unique test efforts customized to determine the potential impacts of the specific raw material or process change. Following the evaluations, the various raw material and process changes were successfully implemented with no detectable effect on the performance of the AS-NBR insulation. This paper will discuss some of the raw material and process changes evaluated, the methodology used in designing the unique test plans, and the general evaluation results. A summary of the change history of RSRM AS-NBR internal insulation is also presented.

Tailored Porous Materials

Energy Technology Data Exchange (ETDEWEB)

BARTON,THOMAS J.; BULL,LUCY M.; KLEMPERER,WALTER G.; LOY,DOUGLAS A.; MCENANEY,BRIAN; MISONO,MAKOTO; MONSON,PETER A.; PEZ,GUIDO; SCHERER,GEORGE W.; VARTULI,JAMES C.; YAGHI,OMAR M.

1999-11-09

Tailoring of porous materials involves not only chemical synthetic techniques for tailoring microscopic properties such as pore size, pore shape, pore connectivity, and pore surface reactivity, but also materials processing techniques for tailoring the meso- and the macroscopic properties of bulk materials in the form of fibers, thin films and monoliths. These issues are addressed in the context of five specific classes of porous materials: oxide molecular sieves, porous coordination solids, porous carbons, sol-gel derived oxides, and porous heteropolyanion salts. Reviews of these specific areas are preceded by a presentation of background material and review of current theoretical approaches to adsorption phenomena. A concluding section outlines current research needs and opportunities.

Fusion Reactor Materials

Energy Technology Data Exchange (ETDEWEB)

Decreton, M

2002-04-01

The objective of SCK-CEN's programme on fusion reactor materials is to contribute to the knowledge on the radiation-induced behaviour of fusion reactor materials and components as well as to help the international community in building the scientific and technical basis needed for the construction of the future reactor. Ongoing projects include: the study of the mechanical and chemical (corrosion) behaviour of structural materials under neutron irradiation and water coolant environment; the investigation of the characteristics of irradiated first wall material such as beryllium; investigations on the management of materials resulting from the dismantling of fusion reactors including waste disposal. Progress and achievements in these areas in 2001 are discussed.

Roofing Materials Assessment: Investigation of Five Metals in Runoff from Roofing Materials.

Science.gov (United States)

Winters, Nancy; Granuke, Kyle; McCall, Melissa

2015-09-01

To assess the contribution of five toxic metals from new roofing materials to stormwater, runoff was collected from 14 types of roofing materials and controls during 20 rain events and analyzed for metals. Many of the new roofing materials evaluated did not show elevated metals concentrations in the runoff. Runoff from several other roofing materials was significantly higher than the controls for arsenic, copper, and zinc. Notably, treated wood shakes released arsenic and copper, copper roofing released copper, PVC roofing released arsenic, and Zincalume® and EPDM roofing released zinc. For the runoff from some of the roofing materials, metals concentrations decreased significantly over an approximately one-year period of aging. Metals concentrations in runoff were demonstrated to depend on a number of factors, such as roofing materials, age of the materials, and climatic conditions. Thus, application of runoff concentrations from roofing materials to estimate basin-wide releases should be undertaken cautiously.

Computing and Material

DEFF Research Database (Denmark)

Ramsgaard Thomsen, Mette; Tamke, Martin

2013-01-01

The digital is often said to bring us away from material. The adverse is true: digital design and fabrication grants new interfaces towards material and allows architectural design to engage with material on architectural scale in a way that is further reaching than ever before....

Control of nuclear material specified equipment and specified material

International Nuclear Information System (INIS)

1982-04-01

The goal and application field of NE 2.02 regulatory guide of CNEN (Comissao Nacional de Energia Nuclear), are described. This regulatory guide is about nuclear material management, specified equipment and specified material. (E.G.) [pt

Nanostructured composite reinforced material

Science.gov (United States)

Seals, Roland D [Oak Ridge, TN; Ripley, Edward B [Knoxville, TN; Ludtka, Gerard M [Oak Ridge, TN

2012-07-31

A family of materials wherein nanostructures and/or nanotubes are incorporated into a multi-component material arrangement, such as a metallic or ceramic alloy or composite/aggregate, producing a new material or metallic/ceramic alloy. The new material has significantly increased strength, up to several thousands of times normal and perhaps substantially more, as well as significantly decreased weight. The new materials may be manufactured into a component where the nanostructure or nanostructure reinforcement is incorporated into the bulk and/or matrix material, or as a coating where the nanostructure or nanostructure reinforcement is incorporated into the coating or surface of a "normal" substrate material. The nanostructures are incorporated into the material structure either randomly or aligned, within grains, or along or across grain boundaries.

Neutron thermalization in absorbing infinite homogeneous media: theoretical methods; Methodes theoriques pour l'etude de la thermalisation des neutrons dans les milieux absorbants infinis et homogenes

Energy Technology Data Exchange (ETDEWEB)

Cadilhac, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1963-11-15

After a general survey of the theory of neutron thermalization in homogeneous media, one introduces, through a proper formulation, a simplified model generalizing both the Horowitz model (generalized heavy free gas approximation) and the proton gas model. When this model is used, the calculation of spectra is reduced to the solution of linear second order differential equations. Since it depends on two arbitrary functions, the model gives a good approximation of any usual moderator for reactor physics purposes. The choice of these functions is discussed from a theoretical point of view; a method based on the consideration of the first two moments of the scattering law is investigated. Finally, the possibility of discriminating models by using experimental informations is considered. (author) [French] Apres un passage en revue de generalites sur la thermalisation des neutrons dans les milieux homogenes, on developpe un formalisme permettant de definir et d'etudier un modele simplifie de thermaliseur. Ce modele generalise l'approximation proposee par J. HOROWITZ (''gaz lourd generalise'') et comporte comme cas particulier le modele ''hydrogene gazeux monoatomique''. Il ramene le calcul des spectres a la resolution d'equations differentielles lineaires du second ordre. Il fait intervenir deux fonctions arbitraires, ce qui lui permet de representer les thermaliseurs usuels de facon satisfaisante pour les besoins de la physique des reacteurs. L'ajustement theorique de ces fonctions est discute; on etudie une methode basee sur la consideration des deux premiers moments de la loi de diffusion. On envisage enfin la possibilite de discriminer les modeles d'apres des renseignements d'origine experimentale. (auteur)

Soft-Material Robotics

OpenAIRE

Wang, L; Nurzaman, SG; Iida, Fumiya

2017-01-01

There has been a boost of research activities in robotics using soft materials in the past ten years. It is expected that the use and control of soft materials can help realize robotic systems that are safer, cheaper, and more adaptable than the level that the conventional rigid-material robots can achieve. Contrary to a number of existing review and position papers on soft-material robotics, which mostly present case studies and/or discuss trends and challenges, the review focuses on the fun...

Phase change material for temperature control and material storage

Science.gov (United States)

Wessling, Jr., Francis C. (Inventor); Blackwood, James M. (Inventor)

2011-01-01

A phase change material comprising a mixture of water and deuterium oxide is described, wherein the mole fraction of deuterium oxide is selected so that the mixture has a selected phase change temperature within a range between 0.degree. C. and 4.degree. C. The mixture is placed in a container and used for passive storage and transport of biomaterials and other temperature sensitive materials. Gels, nucleating agents, freezing point depression materials and colorants may be added to enhance the characteristics of the mixture.

Anthropogenic materials and products containing natural radionuclides. Pt. 1a. Radiation properties of raw materials and waste materials. A literature study

International Nuclear Information System (INIS)

Reichelt, A.; Roehrer, J.; Lehmann, K.H.

1995-12-01

Cased on the literature study, the publication presents relevant data on raw materials and wastes containing natural radionuclides. The study is part 1a of the project on ''Anthropogenic materials and waste materials containing natural radionuclides''. Part 1 of the project gives data and information on about 100 different materials and wastes or products for household or industrial applications which contain significant amounts of natural radioactivity. In addition, part 1 presents for some of these materials information on their applications, consumption, radioactivity and resulting radiation doses. The raw materials and waste materials on the list in part 1 are characterised in this 1a report. Wherever appropriate, two or more materials are dealt with in one chapter, as e.g. felspar and felspar sands (pegmatite), talcum, and soapstone. The wastes are dealt with in the chapters discussing the relevant raw materials. The information given is as derived from the literature and does not include comments or evaluation by the authors of this report. Whenever the literature study did not yield information on radiological aspects of a material on the list, an appropriate notice is given. (Orig./DG) [de

What is materialism? Testing two dominant perspectives on materialism in the marketing literature

Directory of Open Access Journals (Sweden)

Manchiraju Srikant

2015-09-01

Full Text Available Materialism is defined as the importance an individual attaches to worldly possessions, which has been considered as an important construct in consumer behavior and marketing literature. There are two dominant perspectives on individual materialism in the marketing literature that focus on (1 personality traits or (2 individual personal values. However, several scholars have questioned the aforementioned materialism conceptualizations. Therefore, the present study directly compares the constructs of personality materialism and value materialism. Structural equation modeling was employed to address the following issues: (1 what are the key conceptual dimensions of materialism, (2 how much do they overlap, and (3 what is their discriminant validity in predicting outcomes linked to materialism. We suggest these two dominant perspectives on individual materialism are two distinct constructs, as they shared only 21 percent of common variance. Furthermore, we stress the multi-faceted nature of materialism, with an emphasis on future research directions related to materialism in marketing.

Aerogel / Polymer Composite Materials

Science.gov (United States)

Williams, Martha K. (Inventor); Smith, Trent M. (Inventor); Fesmire, James E. (Inventor); Roberson, Luke B. (Inventor); Clayton, LaNetra M. (Inventor)

2017-01-01

The invention provides new composite materials containing aerogels blended with thermoplastic polymer materials at a weight ratio of aerogel to thermoplastic polymer of less than 20:100. The composite materials have improved thermal insulation ability. The composite materials also have better flexibility and less brittleness at low temperatures than the parent thermoplastic polymer materials.

QUECHUA LANGUAGE MATERIALS PROJECT, GUIDE TO THE MATERIALS.

Science.gov (United States)

SOLA, DONALD F.

THIS GUIDEBOOK DESCRIBES THE NATURE AND USE OF THE MATERIALS PREPARED FOR TEACHING THREE OF THE MAIN DIALECTS OF QUECHUA TO SPEAKERS OF ENGLISH INTERESTED IN WORKING OR DOING RESEARCH IN THE ANDEAN REGION. DESCRIPTIVE AND PEDAGOGICAL MATERIALS HAVE BEEN PREPARED FOR EACH OF THREE IMPORTANT DIALECTS--CUZCO AND AYACUCHO IN PERU, AND COCHABAMBA IN…

Fusion reactor materials

International Nuclear Information System (INIS)

Rowcliffe, A.F.; Burn, G.L.; Knee', S.S.; Dowker, C.L.

1994-02-01

This is the fifteenth in a series of semiannual technical progress reports on fusion reactor materials. This report combines research and development activities which were previously reported separately in the following progress reports: Alloy Development for Irradiation Performance; Damage Analysis and Fundamental Studies; Special purpose Materials. These activities are concerned principally with the effects of the neutronic and chemical environment on the properties and performance of reactor materials; together they form one element of the overall materials programs being conducted in support of the Magnetic Fusion Energy Program of the U.S. Department of Energy. The Fusion Reactor Materials Program is a national effort involving several national laboratories, universities, and industries. The purpose of this series of reports is to provide a working technical record for the use of the program participants, and to provide a means of communicating the efforts of materials scientists to the rest of the fusion community, both nationally and worldwide

Shape memory materials

Institute of Scientific and Technical Information of China (English)

无

2001-01-01

Compared with piezoelectric ceramics and magnetostrictive materials, the shape memory materials possess larger recoverable strain and recovery stress but slower response to external field. It is expected that the magneto-shape memory materials may develop considerable strain as well as rapid and precise shape control. Pseudoelasticity and shape memory effect (SME) resulted from martensitic transformation and its reverse transformation in shape memory materials were generally described. The requirements of appearing the shape memory effect in materials and the criteria for thermoelastic martensitic transformation were given. Some aspects concerning characteristics of martensitic transformation, and factors affecting SME in Ni-Ti, Cu-Zn-Al and Fe-Mn-Si based alloys as well as ZrO2 containing ceramics were briefly reviewed. Thermodynamic calculation of Ms temperature as function of grain size and parent ordering in Cu-Zn-Al was presented. The works on prediction of Ms in Fe-Mn-Si based alloys and in ZrO2-CeO2 were mentioned. Magnetic shape memory materials were briefly introduced.

Biological materials: a materials science approach.

Science.gov (United States)

Meyers, Marc A; Chen, Po-Yu; Lopez, Maria I; Seki, Yasuaki; Lin, Albert Y M

2011-07-01

The approach used by Materials Science and Engineering is revealing new aspects in the structure and properties of biological materials. The integration of advanced characterization, mechanical testing, and modeling methods can rationalize heretofore unexplained aspects of these structures. As an illustration of the power of this methodology, we apply it to biomineralized shells, avian beaks and feathers, and fish scales. We also present a few selected bioinspired applications: Velcro, an Al2O3-PMMA composite inspired by the abalone shell, and synthetic attachment devices inspired by gecko. Copyright © 2010 Elsevier Ltd. All rights reserved.

Underground processing method for radiation-contaminated material and transferring method for buffer molding material

International Nuclear Information System (INIS)

Akasaka, Hidenari; Shimura, Satoshi; Asano, Eiichi; Yamagata, Junji; Ninomiya, Nobuo; Kawakami, Susumu.

1995-01-01

A bottomed molding material (buffer molding material) is formed into a bottomed cylindrical shape by solidifying, under pressure, powders such as of bentonite into a highly dense state by a cold isotropic pressing or the like, having a hole for accepting and containing a vessel for radiation-contaminated materials. The bottomed cylindrical molding material is loaded on a transferring vessel, and transferred to a position near the site for underground disposal. The bottomed cylindrical molding material having a upwarded containing hole is buried in the cave for disposal. The container for radiation-contaminated material is loaded and contained in the containing hole of the bottomed cylindrical molding material. A next container for radiation-contaminated materials is juxtaposed thereover. Then, a bottomed cylindrical molding material having a downwarded containing hole is covered to the container for the radiation-contaminated material in a state being protruded upwardly. The radiation-contaminated material is thus closed by a buffer material of the same material at the circumference thereof. (I.N.)

Materials science

International Nuclear Information System (INIS)

2002-01-01

the document is a collection of papers on different aspects of materials science. It discusses many items such as semiconductors, surface properties and interfaces, construction and civil engineering, metallic materials, polymers and composites, biology and biomaterials, metallurgy etc.. - 1 - Document1 Document1

Hydrogen storage material, electrochemically active material, electrochemical cell and electronic equipment

NARCIS (Netherlands)

2008-01-01

The invention relates to a hydrogen storage material comprising an alloy of magnesium. The invention further relates to an electrochemically active material and an electrochemical cell provided with at least one electrode comprising such a hydrogen storage material. Also, the invention relates to

Piezoelectric materials as stimulatory biomedical materials and scaffolds for bone repair.

Science.gov (United States)

Tandon, Biranche; Blaker, Jonny J; Cartmell, Sarah H

2018-04-16

The process of bone repair and regeneration requires multiple physiological cues including biochemical, electrical and mechanical - that act together to ensure functional recovery. Myriad materials have been explored as bioactive scaffolds to deliver these cues locally to the damage site, amongst these piezoelectric materials have demonstrated significant potential for tissue engineering and regeneration, especially for bone repair. Piezoelectric materials have been widely explored for power generation and harvesting, structural health monitoring, and use in biomedical devices. They have the ability to deform with physiological movements and consequently deliver electrical stimulation to cells or damaged tissue without the need of an external power source. Bone itself is piezoelectric and the charges/potentials it generates in response to mechanical activity are capable of enhancing bone growth. Piezoelectric materials are capable of stimulating the physiological electrical microenvironment, and can play a vital role to stimulate regeneration and repair. This review gives an overview of the association of piezoelectric effect with bone repair, and focuses on state-of-the-art piezoelectric materials (polymers, ceramics and their composites), the fabrication routes to produce piezoelectric scaffolds, and their application in bone repair. Important characteristics of these materials from the perspective of bone tissue engineering are highlighted. Promising upcoming strategies and new piezoelectric materials for this application are presented. Electrical stimulation/electrical microenvironment are known effect the process of bone regeneration by altering the cellular response and are crucial in maintaining tissue functionality. Piezoelectric materials, owing to their capability of generating charges/potentials in response to mechanical deformations, have displayed great potential for fabricating smart stimulatory scaffolds for bone tissue engineering. The growing

Utopian Materialities

DEFF Research Database (Denmark)

Elgaard-Jensen, Torben

2004-01-01

In various ways, this paper makes the counter-intuitive claim that the utopian and the material are thoroughlyinterdependent, rather than worlds apart. First, through a reading of Thomas More's Utopia, it is argued thatUtopia is the product of particular kinds of relations, rather than merely...... a detachment from the known world.Second, the utopianism of a new economy firm is examined. It is argued that the physical set-up of the firm -in particular the distribution of tables and chairs - evoke a number of alternatives to ordinary work practice.In this way the materialities of the firm are crucial...... to its persuasive image of being the office of the future.The notion that utopia is achieved through material arrangements is finally related to the analysis of facts andfictions in ANT. It is argued, that even though Utopias are neither fact nor fiction, they are both material andeffective...

Thermoelectric materials having porosity

Science.gov (United States)

Heremans, Joseph P.; Jaworski, Christopher M.; Jovovic, Vladimir; Harris, Fred

2014-08-05

A thermoelectric material and a method of making a thermoelectric material are provided. In certain embodiments, the thermoelectric material comprises at least 10 volume percent porosity. In some embodiments, the thermoelectric material has a zT greater than about 1.2 at a temperature of about 375 K. In some embodiments, the thermoelectric material comprises a topological thermoelectric material. In some embodiments, the thermoelectric material comprises a general composition of (Bi.sub.1-xSb.sub.x).sub.u(Te.sub.1-ySe.sub.y).sub.w, wherein 0.ltoreq.x.ltoreq.1, 0.ltoreq.y.ltoreq.1, 1.8.ltoreq.u.ltoreq.2.2, 2.8.ltoreq.w.ltoreq.3.2. In further embodiments, the thermoelectric material includes a compound having at least one group IV element and at least one group VI element. In certain embodiments, the method includes providing a powder comprising a thermoelectric composition, pressing the powder, and sintering the powder to form the thermoelectric material.

Editorial: Defining materials science: A vision from APL Materials

Directory of Open Access Journals (Sweden)

Judith MacManus-Driscoll

2014-07-01

Full Text Available These are exciting times for materials science—a field which is growing more rapidly than any other physical science discipline. More than ever, the field is providing the vital link between science and engineering, between pure and applied. But what is the subject's definition and why is the field ballooning? I address these questions in the context of how APL Materials intends to play a role in advancing this important field. My introspective focus arises as we approach the first year anniversary of APL Materials.

Effect of material parameters on the compactibility of backfill materials

International Nuclear Information System (INIS)

Keto, P.; Kuula-Vaeisaenen, P.; Ruuskanen, J.

2006-05-01

The effect of different parameters on compactibility of mixture of bentonite and ballast as well as Friedland-clay was studied in laboratory with two different types of compaction tests. The material parameters varied were grain size distribution of the ballast material, grain shape, water ratio and bentonite content (15/30%). The other parameters varied were salinity of the mixing water, mixing process and compaction method and energy. Ballast materials with varying grain size distributions were produced from Olkiluoto mica-gneiss with different type of crushing processes. In addition, sand was chosen for ballast material due to its uniform grain size distribution and rounded grain shape. The maximum grain size of the ballast materials was between 5-10 mm. When comparing the compactibility of ballast materials, the highest dry densities were gained for ballast materials with graded grain size distribution. The compaction behaviour of the tested bentonite ballast mixtures is dominated by the bentonite content. The other parameters varied did not have significant effect on the compactibility of the mixtures with bentonite content of 30%. This can be explained with the amount of bentonite that is higher than what is needed to fill up the volume between the ballast grains. The results gained with the two different compaction tests are comparable. Both the bentonite/ballast mixtures and the Friedland clay behaved similarly when compacted with three different compaction pressures (180, 540 and 980 kPa). (orig.)

Materials for breeding blankets

International Nuclear Information System (INIS)

Mattas, R.F.; Billone, M.C.

1995-09-01

There are several candidate concepts for tritium breeding blankets that make use of a number of special materials. These materials can be classified as Primary Blanket Materials, which have the greatest influence in determining the overall design and performance, and Secondary Blanket Materials, which have key functions in the operation of the blanket but are less important in establishing the overall design and performance. The issues associated with the blanket materials are specified and several examples of materials performance are given. Critical data needs are identified

Materials for breeding blankets

International Nuclear Information System (INIS)

Mattas, R.F.; Billone, M.C.

1996-01-01

There are several candidate concepts for tritium breeding blankets that make use of a number of special materials. These materials can be classified as primary blanket materials, which have the greatest influence in determining the overall design and performance, and secondary blanket materials, which have key functions in the operation of the blanket but are less important in establishing the overall design and performance. The issues associated with the blanket materials are specified and several examples of materials performance are given. Critical data needs are identified. (orig.)

Materials at LANL

Energy Technology Data Exchange (ETDEWEB)

Taylor, Antoinette J [Los Alamos National Laboratory

2010-01-01

Exploring the physics, chemistry, and metallurgy of materials has been a primary focus of Los Alamos National Laboratory since its inception. In the early 1940s, very little was known or understood about plutonium, uranium, or their alloys. In addition, several new ionic, polymeric, and energetic materials with unique properties were needed in the development of nuclear weapons. As the Laboratory has evolved, and as missions in threat reduction, defense, energy, and meeting other emerging national challenges have been added, the role of materials science has expanded with the need for continued improvement in our understanding of the structure and properties of materials and in our ability to synthesize and process materials with unique characteristics. Materials science and engineering continues to be central to this Laboratory's success, and the materials capability truly spans the entire laboratory - touching upon numerous divisions and directorates and estimated to include >1/3 of the lab's technical staff. In 2006, Los Alamos and LANS LLC began to redefine our future, building upon the laboratory's established strengths and promoted by strongly interdependent science, technology and engineering capabilities. Eight Grand Challenges for Science were set forth as a technical framework for bridging across capabilities. Two of these grand challenges, Fundamental Understanding of Materials and Superconductivity and Actinide Science. were clearly materials-centric and were led out of our organizations. The complexity of these scientific thrusts was fleshed out through workshops involving cross-disciplinary teams. These teams refined the grand challenge concepts into actionable descriptions to be used as guidance for decisions like our LDRD strategic investment strategies and as the organizing basis for our external review process. In 2008, the Laboratory published 'Building the Future of Los Alamos. The Premier National Security Science Laboratory

2002 materials report

International Nuclear Information System (INIS)

2003-01-01

This report is the very first devoted to the researches carried out in all centres of the French atomic energy commission (CEA) in the domain of materials. Each material, technology or process is presented with some explanations. The report is divided in three chapters dealing with: 1 - the nano-materials and the engineering of surfaces: surface functionalization (new coatings for cutting tools, new CVD process for the deposition of carbon nano-tubes, nano-structured metallic films, polymerization by gaseous phase deposition, electro-chromium systems, functional coatings by sol-gel process, sol-gel processing of optical fibers, modeling of the plasma projection process); nano-particulates and emerging materials (synthesis of SiCN nano-particulates by laser pyrolysis, hot-forming of Si/C/N/O nano-metric powders by isostatic compression, synthesis of aligned carbon nano-tubes by pyrolysis of mixed aerosols, elaboration and characterization of new oxide-type materials in supercritical CO 2 phase, fluorescent semiconductor nano-crystals for labelling, fibrillary proteins and their behaviour at interfaces); 2 - materials engineering and numerical materials (simulation of the welding process by YAG laser pulses, welded joints reliability, control of precipitation microstructures by the addition of nucleating agents, optimization of pressing cycles for the forming of industrial parts by matrix compaction, mechanical and thermal pre-dimensioning of thermo-structural composites, modeling of the behaviour of thermo-structural composites, joints follow up system for innovative welding control process); joining technologies (feasibility study for the fabrication by diffusion welding of the first wall panels of ITER reactor, welding of spent fuel containers for long lasting storage, electron beam welding of aluminium 6061 and hot cracking risk, hybrid welding technology, heat source model for TIG welding, cladding of the amplifying plates of the Megajoule laser facility

Design of lightweight multi-material automotive bodies using new material performance indices of thin-walled beams for the material selection with crashworthiness consideration

International Nuclear Information System (INIS)

Cui, Xintao; Zhang, Hongwei; Wang, Shuxin; Zhang, Lianhong; Ko, Jeonghan

2011-01-01

Currently, automotive bodies are constructed usually using a single material, e.g. steel or aluminum. Compared to single-material automotive bodies, multi-material automotive bodies allow optimal material selection in each structural component for higher product performance and lower cost. This paper presents novel material performance indices and procedures developed to guide systematic material selection for multi-material automotive bodies. These new indices enable to characterize the crashworthiness performance of complex-shaped thin-walled beams in multi-material automotive bodies according to material types. This paper also illustrates the application of these performance indices and procedures by designing a lightweight multi-material automotive body. These procedures will help to design a lightweight and affordable body favored by the automotive industry, thus to reduce fuel consumption and greenhouse gas emissions.

Materials Science Laboratory

Science.gov (United States)

Jackson, Dionne

2005-01-01

The NASA Materials Science Laboratory (MSL) provides science and engineering services to NASA and Contractor customers at KSC, including those working for the Space Shuttle. International Space Station. and Launch Services Programs. These services include: (1) Independent/unbiased failure analysis (2) Support to Accident/Mishap Investigation Boards (3) Materials testing and evaluation (4) Materials and Processes (M&P) engineering consultation (5) Metrology (6) Chemical analysis (including ID of unknown materials) (7) Mechanical design and fabrication We provide unique solutions to unusual and urgent problems associated with aerospace flight hardware, ground support equipment and related facilities.

Fusion Reactor Materials

International Nuclear Information System (INIS)

Decreton, M.

2001-01-01

The objective of SCK-CEN's programme on fusion reactor materials is to contribute to the knowledge on the behaviour of fusion reactor materials and components during and after irradiation. Ongoing projects include: the study of the mechanical behaviour of structural materials under neutron irradiation; the investigation of the characteristics of irradiated first wall material such as beryllium; the detection of abrupt electrical degradation of insulating ceramics under high temperature and neutron irradiation; and the study of dismantling and waste disposal strategy for fusion reactors. Progress and achievements in these areas in 2000 are discussed

The Time of Materiality

Directory of Open Access Journals (Sweden)

Estrid Sørensen

2007-01-01

Full Text Available While time and space form a classic duality in social science, this article demonstrates a perspective on time, space and materiality as a core trinity. As a prominent figure in contemporary discussions on materiality in the social sciences Science and Technology Studies (STS emphasizes relational approaches. STS however lacks a clear relational definition of materiality and tends instead to focus on the agency of entities, on for instance material agency. The article suggests a relational definition of materiality and notes that this move implies turning the question of the time of materiality into an empirical question. It is argued that relational materiality must be studied spatially, and thus a spatial approach describing patterns of relations is presented. Based on field work in a primary school classroom and computer lab, three materials are analyzed: the blackboard, a bed-loft and an online 3D virtual environment. The empirical descriptions depict three different materialities, and it is shown how time is formed differently in each of them. Time, it is argued, is an emergent and characterizing aspect of materialities as spatial formations. URN: urn:nbn:de:0114-fqs070122

Materials

CSIR Research Space (South Africa)

Van Wyk, Llewellyn V

2009-02-01

Full Text Available . It is generally included as part of a structurally insulated panel (SIP) where the foam is sandwiched between external skins of steel, wood or cement. Cement composites Cement bonded composites are an important class of building materials. These products... for their stone buildings, including the Egyptians, Aztecs and Inca’s. As stone is a very dense material it requires intensive heating to become warm. Rocks were generally stacked dry but mud, and later cement, can be used as a mortar to hold the rocks...

Contact materials for nanoelectronics

KAUST Repository

Alshareef, Husam N.

2011-02-01

In this article, we review current research activities in contact material development for electronic and nanoelectronic devices. A fundamental issue in contact materials research is to understand and control interfacial reactions and phenomena that modify the expected device performance. These reactions have become more challenging and more difficult to control as new materials have been introduced and as device sizes have entered the deep nanoscale. To provide an overview of this field of inquiry, this issue of MRS Bulletin includes articles on gate and contact materials for Si-based devices, junction contact materials for Si-based devices, and contact materials for alternate channel substrates (Ge and III-V), nanodevices. © 2011 Materials Research Society.

Hydrophilic nanoporous materials

DEFF Research Database (Denmark)

2010-01-01

The present application discloses a method for preparing and rendering hydrophilic a nanoporous material of a polymer matrix which has a porosity of 0.1-90 percent (v/v), such that the ratio between the final water absorption (percent (w/w)) and the porosity (percent (v/v)) is at least 0.05, the ......The present application discloses a method for preparing and rendering hydrophilic a nanoporous material of a polymer matrix which has a porosity of 0.1-90 percent (v/v), such that the ratio between the final water absorption (percent (w/w)) and the porosity (percent (v/v)) is at least 0.......05, the method comprising the steps of: (a) preparing a precursor material comprising at least one polymeric component and having a first phase and a second phase; (b) removal of at least a part of the first phase of the precursor material prepared in step (a) so as to leave behind a nanoporous material...... of the polymer matrix; (c) irradiating at least a part of said nanoporous material with light of a wave length of in the range of 250-400 nm (or 200-700 nm) in the presence of oxygen and/or ozone. Corresponding hydrophilic nanoporous materials are also disclosed. L...

Determination of internationally controlled materials according to provisions of the law for the regulations of nuclear source materials, nuclear fuel materials and reactors

International Nuclear Information System (INIS)

1984-01-01

The internationally controlled materials determined according to the law for nuclear source materials, etc. are the following: nuclear source materials, nuclear fuel materials, moderating materials, facilities including reactors, etc. sold, transferred, etc. to Japan according to the agreements for peaceful uses of atomic energy between Japan, and the United States, the United Kingdom, Canada, Australia and France by the respective governments and those organs under them; nuclear fuel materials resulting from usage of the above sold and transferred materials, facilities; nuclear fuel materials sold to Japan according to agreements set by the International Atomic Energy Agency; nuclear fuel materials involved with the safeguards in nuclear weapons non-proliferation treaty with IAEA. (Mori, K.)

Computerized real-time materials accountability system for safeguards material control

International Nuclear Information System (INIS)

Spencer, W.F.; Affel, R.G.; Austin, H.C.; Nichols, J.P.; Stoutt, B.H.; Wachter, J.W.

1975-01-01

A real-time, computer-based system is described which provides safeguards material control at the Oak Ridge National Laboratory. Originally installed in 1972 to provide computerized real-time fissile materials accountability for criticality control purposes, the system has been expanded to provide accountability of all source and nuclear materials (SNM) and to utilize the on-line inventory files in support of the Laboratory physical protection and surveillance procedures. (auth)

Visualizing Earth Materials

Science.gov (United States)

Cashman, K. V.; Rust, A.; Stibbon, E.; Harris, R.

2016-12-01

Earth materials are fundamental to art. They are pigments, they are clay, they provide form and color. Earth scientists, however, rarely attempt to make the physical properties of Earth materials visible through art, and similarly many artists use Earth materials without fully understanding their physical and chemical properties. Here we explore the intersection between art and science through study of the physical properties of Earth materials as characterized in the laboratory, and as transferred to paper using different techniques and suspending media. One focus of this collaboration is volcanic ash. Ash is interesting scientifically because its form provides information on the fundamental processes that drive volcanic eruptions, and determines its transport properties, and thus its potential to affect populations far downwind of the volcano. Ash properties also affect its behavior as an art material. From an aesthetic point of view, ash lends a granular surface to the image; it is also uncontrollable, and thus requires engagement between artist and medium. More fundamentally, using ash in art creates an exchange between the medium and the subject matter, and imparts something of the physical, visceral experience of volcanic landscapes to the viewer. Another component of this work uses powdered rock as a printing medium for geologic maps. Because different types of rock create powders with different properties (grain size distributions and shapes), the geology is communicated not only as color, but also by the physical characteristics of the material as it interacts with the paper. More importantly, the use of actual rocks samples as printing material for geologic maps not only makes a direct connection between the map and the material it represents, but also provides an emotional connection between the map, the viewer and the landscape, its colors, textures and geological juxtapositions. Both case studies provide examples not only of ways in which artists can

Biomimetics in materials science self-healing, self-lubricating, and self-cleaning materials

CERN Document Server

Nosonovsky, Michael

2012-01-01

Biomimetics in Materials Science provides a comprehensive theoretical and practical review of biomimetic materials with self-healing, self-lubricating and self-cleaning properties. These three topics are closely related and constitute rapidly developing areas of study. The field of self-healing materials requires a new conceptual understanding of this biomimetic technology, which is in contrast to traditional  engineering processes such as wear and fatigue.  Biomimetics in Materials Science is the first monograph to be devoted to these materials. A new theoretical framework for these processes is presented based on the concept of multi-scale structure of entropy and non-equilibrium thermodynamics, together with a detailed review of the available technology. The latter includes experimental, modeling, and simulation results obtained on self-healing/lubricating/cleaning materials since their emergence in the past decade. Describes smart, biomimetic materials in the context of nanotechnology, biotechnology, an...

The "olfactory mirror" and other recent attempts to demonstrate self-recognition in non-primate species.

Science.gov (United States)

Gallup, Gordon G; Anderson, James R

2018-03-01

The recent attempt by Horowitz (2017) to develop an "olfactory mirror" test of self-recognition in domestic dogs raises some important questions about the kinds of data that are required to provide definitive evidence for self-recognition in dogs and other species. We conclude that the "olfactory mirror" constitutes a compelling analog to the mark test for mirror self-recognition in primates, but despite claims to the contrary neither dogs, elephants, dolphins, magpies, horses, manta rays, squid, nor ants have shown compelling, reproducible evidence for self-recognition in any modality. Copyright © 2017 Elsevier B.V. All rights reserved.

Architectural Specialization for Inter-Iteration Loop Dependence Patterns

Science.gov (United States)

2015-10-01

Horowitz, F. Labonte, O. Shacham, K. Olukotun, L. Hammond, C. Batten 1975 1980 1985 1990 1995 2000 2005 2010 2015 100 101 102 103 104 105 106 SPECint...Execution GPR RF 32 × 32b 2r2w GPP LLFU D$ Request/Response Crossbar L1 I$ 16 KB L2 Request and Response Crossbars L1 D$ 16 KB SLFU Minimal changes to...XLOOPS uArch • XLOOPS Evaluation PyMTL Pydgin Specialized Execution – xloop.uc GPR RF 32 × 32b 2r2w GPP LLFU D$ Request/Response Crossbar L1 I$ 16 KB L2

Peer Involvement in University Students' Education

Directory of Open Access Journals (Sweden)

Zlatka Cugmas

2016-12-01

Full Text Available We investigated the correlations between peer involvement in students’ education and their self-perception, attachment style, relationships with peers, personality and well-being. We used the Inventory of parent and peer attachment (Armsden & Greenberg, 1987, Relationship questionnaire (Bartholomew & Horowitz, 1991, Questionnaire of the subjects’ self-perceptions (Cugmas, 2012 and The big five questionnaire (BFQ; Caprara et al, 2002. We developed the questionnaires of peer involvement and subjects’ well-being. Positive relationships with peers, secure attachment style, positive self-perceptions, some personal characteristics and well-being were positively associated with peer support, and negatively with peer pressure.

Gravitational Rutherford scattering and Keplerian orbits for electrically charged bodies in heterotic string theory

Energy Technology Data Exchange (ETDEWEB)

Villanueva, J.R. [Universidad de Valparaiso, Instituto de Fisica y Astronomia, Valparaiso (Chile); Centro de Astrofisica de Valparaiso, Valparaiso (Chile); Olivares, Marco [Universidad Diego Portales, Avenida Ejercito Libertador 441, Facultad de Ingenieria, Santiago (Chile)

2015-11-15

Properties of the motion of electrically charged particles in the background of the Gibbons-Maeda-Garfinkle-Horowitz-Strominger black hole is presented in this paper. Radial and angular motions are studied analytically for different values of the fundamental parameter. Therefore, gravitational Rutherford scattering and Keplerian orbits are analyzed in detail. Finally, this paper complements previous work by Fernando for null geodesics (Phys Rev D 85:024033, 2012), Olivares and Villanueva (Eur Phys J C 73:2659, 2013) and Blaga (Automat Comp Appl Math 22:41-48, 2013; Serb Astron 190:41, 2015) for time-like geodesics. (orig.)

Perfil Clínico de Apego (PCA): Elaboración de un sistema de categorías para la evaluación del apego

OpenAIRE

Lucena, Glòria; Cifre, Ignacio; Castillo Garayoa, José A.; Aragonés, Elena

2015-01-01

A partir de la teoría de Bowlby y de los estilos de apego propuestos por Bartholomew y Horowitz, se desarrolla el Perfil Clínico de Apego-narrativas (PCA-n), un sistema de observación para evaluar el apego a partir de las narrativas de los y las pacientes. En el Estudio 1, se construye una primera versión del instrumento (PCAv1). La consistencia interna resulta adecuada en la evaluación del apego seguro y evitativo, pero insuficiente en el caso del apego preocupado y temeroso. En el Estudio 2...

Numerical simulation of a possible counterexample to cosmic censorship

International Nuclear Information System (INIS)

Garfinkle, David

2004-01-01

A numerical simulation is presented here of the evolution of initial data of the kind that was conjectured by Hertog, Horowitz, and Maeda to be a violation of cosmic censorship. Those initial data are essentially a thick domain wall connecting two regions of anti-de Sitter space. The initial data have a free parameter that is the initial size of the wall. The simulation shows no violation of cosmic censorship, but rather the formation of a small black hole. The simulation described here is for a moderate wall size and leaves open the possibility that cosmic censorship might be violated for larger walls

The materials physics companion

CERN Document Server

Fischer-Cripps, Anthony C

2014-01-01

Introduction to Materials Physics: Structure of matter. Solid state physics. Dynamic properties of solids. Dielectric Properties of Materials: Dielectric properties. Ferroelectric and piezoelectric materials. Dielectric breakdown. Applications of dielectrics. Magnetic Properties of Materials: Magnetic properties. Magnetic moment. Spontaneous magnetization. Superconductivity.

Materials and nanotechnology

International Nuclear Information System (INIS)

2014-01-01

The focus of the Materials and Nanotechnology Program is technology development related to processing, analysis, testing and characterization of materials in general. These are achieved through execution of R&D projects in engineering and materials science, cooperative projects with private and public sector companies, universities and other research institutes. Besides technology development, this Program also fosters training and human resource development in association with the University of São Paulo and many industrial sectors. This Program is divided into sub-programs in broad areas such as ceramic, composite and metallic materials as well as characterization of physical and chemical properties of materials. The sub-programs are further divided into general topics and within each topic, R&D projects. A brief description of progress in each topic during the last three years follows. (author)

Of 'other' materialities

DEFF Research Database (Denmark)

Jensen, Ole B.

2016-01-01

within the ‘new materiality’ literature in philosophy as well as in cultural theory. Important lessons are drawn in from across different positions such as non-representational theory, the nonhuman turn, Object-Oriented-Ontology to mention a few. It is argued that to create the necessary materially......In this article, the notion of materialities is rearticulated as an important field for the future of mobilities research. We focus on the intersection between situational mobilities research and design/architecture. The vocabulary and material imaginary developed within the latter are an important...... sensitive imaginary, mobilities research should be looking to architecture and design, as well as it may profit from engaging with these new materially sensitive thinkers. The article ends with some concrete themes for future research inspired by these intersections and identifies ‘material pragmatism...

Articulating Material Criteria

DEFF Research Database (Denmark)

Hasling, Karen Marie

2013-01-01

This paper discusses the experiences and potentials with materials teaching at the Institute for Product Design at Kolding School of Design, using materials teaching as experiments in my PhD project. The project intents to create a stronger material awareness among product design students...... with emphasis on sustainability. The experiments aim to develop an understanding of, how product design students include materials in their design practice and how tools can be developed that further enhance this. Hence experiments are essential for the progress of the PhD project as they help to observe....... Furthermore the purpose is to initiate a discussion on, how to create educational tools for material awareness creation in the design education e.g. by applying objective and quantitative methods in an otherwise often subjective design process....

Report of the Material Control and Material Accounting Task Force: summary

International Nuclear Information System (INIS)

1978-03-01

A special review was made of the safeguards maintained by licensees possessing 5 kg or more of strategic special nuclear material (SSNM), i.e., plutonium, uranium-233, or uranium enriched in the uranium-235 isotope to 20 percent or more. A Task Force was formed to define the roles and objectives of material control and material accounting in the NRC safeguards program; recommend goals for material control and material accounting systems based on their roles and objectives; assess the extent to which the existing regulatory base meets or provides the capability to meet the recommended goals; and to provide direction for material control and material accounting development, including both near-term and long-term upgrades. Based on results of Task Force investigations it is recommended that licensee plans for measurement control programs be submitted in response to Section 70.57(c) of Title 10 of the Code of Federal Regulations. Other recommendations include the review and upgrading, as necessary, of measurement error propagation models used by each licensee; revision of Nuclear Materials Management and Safeguards System (NMMSS) reporting entities for SSNM licensees to be consistent with the partitioning of facilities into plants or, if appropriate, accounting units; review of NMMSS reporting entities for SSNM licensees to assure that data for high enriched uranium operations are clearly separated from low enriched uranium operations; upgrading of the editing by NMMSS of reported licensee safeguards data for accuracy and consistency; and the acquisition of (a) a secure interactive computer capability for use in collecting, storing, sorting, and analyzing special nuclear material accounting data, and (b) associated flexible computer software that presents safeguards information in a succinct and comprehensive manner

Materials information data bank

International Nuclear Information System (INIS)

Mead, K.E.

1978-03-01

A major concern in the design of weapons systems is compatibility of materials with each other and with the enclosed environment. Usually these systems require long-term storage and must have high reliability at the end of this storage period. Materials selection is thus based on past experience and on laboratory-accelerated testing to assure this long-term reliability. To assist in materials selection, a computerized materials data bank has been established. In addition to references on personnel and documents, this data bank provides annotated information on materials so that the designer and materials engineer can draw on it for guidance in selecting materials. The primary purpose of the data bank is to provide materials compatibility data. However, the structure of the system permits the data bank to be used for storage and retrieval of general materials information. The data bank storage and information retrieval philosophy is discussed and procedures for information gathering are outlined. Examples of data entries and a list of search routines are presented to demonstrate the usefulness and versatility of the system

Molding method of buffer material for underground disposal of radiation-contaminated material, and molded buffer material

International Nuclear Information System (INIS)

Akasaka, Hidenari; Shimura, Satoshi; Kawakami, Susumu; Ninomiya, Nobuo; Yamagata, Junji; Asano, Eiichi

1995-01-01

Upon molding of a buffer material to be used upon burying a vessel containing radiation-contaminated materials in a sealed state, a powdery buffer material to be molded such as bentonite is disposed at the periphery of a mandrel having a cylindrical portion somewhat larger than contaminate container to be subjected to underground disposal. In addition, it is subjected to integration-molding such as cold isotropic press with a plastic film being disposed therearound, to form a molding product at high density. The molding product is released and taken out with the plastic film being disposed thereon. Releasability from an elastic mold is improved by the presence of the plastic film. In addition, if it is stored or transported while having the plastic film being disposed thereon, swelling of the buffer material due to water absorption or moisture absorption can be suppressed. (T.M.)

Isotope research materials

International Nuclear Information System (INIS)

Anon.

1977-01-01

Preparation of research isotope materials is described. Topics covered include: separation of tritium from aqueous effluents by bipolar electrolysis; stable isotope targets and research materials; radioisotope targets and research materials; preparation of an 241 Am metallurgical specimen; reactor dosimeters; ceramic and cermet development; fission-fragment-generating targets of 235 UO 2 ; and wire dosimeters for Westinghouse--Bettis

Trends in building materials

CSIR Research Space (South Africa)

Mapiravana, Joseph

2012-07-01

Full Text Available , steel and composites research. Analysis of the building materials market situation in South Africa identified the major building material cost drivers as cement and concrete and steel. For South Africa, research and development focus has been... in South Africa be cement and concrete, light-weight steel construction, smart tiles and composite materials. Nanotechnology materials should be used for property enhancement. The building materials developed should be modularised and/or panelised...

Thin-Film Material Science and Processing | Materials Science | NREL

Science.gov (United States)

Thin-Film Material Science and Processing Thin-Film Material Science and Processing Photo of a , a prime example of this research is thin-film photovoltaics (PV). Thin films are important because cadmium telluride thin film, showing from top to bottom: glass, transparent conducting oxide (thin layer

Sustainable Materials Management: Non-Hazardous Materials and Waste Management Hierarchy

Science.gov (United States)

EPA developed the non-hazardous materials and waste management hierarchy in recognition that no single waste management approach is suitable for managing all materials and waste streams in all circumstances.

Polymeric Smart Skin Materials: Concepts, Materials, and Devices

Science.gov (United States)

2006-03-31

Fudouzi, H. and Xia, Y., Langmuir 2003, 19, 9653-9658 (also see the highlight in Materials Today, 2003, December, p. 7). 15. Langmuir - Blodgett Silver...development of electroactive dendrimers, dendronized polymers, hyperbranched polymers, and phase- separating block copolymers. Development of such materials...Dalton, and A. K-Y. Jen, " Hyperbranched Fluorinated Aromatic Polyester from Mild One-Pot Polymerization of AB 2 Hydroxy Acid Monomer," Macromolecules

Materials with complex behaviour II properties, non-classical materials and new technologies

CERN Document Server

Oechsner, Andreas

2012-01-01

This book reviews developments and trends in advanced materials and their properties; modeling and simulation of non-classical materials and new technologies for joining materials. Offers tools for characterizing and predicting properties and behavior.

Superconductors and electrotechnical materials

Energy Technology Data Exchange (ETDEWEB)

Stanculescu, V

1975-07-01

A description is given of the properties of superconducting materials and of other materials which will be used in low temperature electrical engineering. The electrical and magnetic properties of type 1 or soft and type 2 or hard superconducting materials are analyzed. Electroinsulating and magnetic materials at low temperatures are also surveyed. Emphasis is placed on gaseous and fluid dielectric substances which retain their condition of physical aggregation at low temperatures and provide a cryogenic medium. These include helium, hydrogen, and nitrogen. As for solid dielectrics, satisfactory electroinsulating materials in terms of mechanical and electrical properties include the category of thermoplastic organic materials such as mylar, teflon, kapton, and nylon. It is also emphasized that cryoelectrical engineering requires magnetic materials with high magnetic induction at low temperatures, coercive field and low magnetic loss.

Material for desulphurisation. [German patent

Energy Technology Data Exchange (ETDEWEB)

Kruse, F; Maus, W

1979-07-19

The invention concerns a material in pellet formm for desulphurisation of gases with a high CO/sub 2/ content, particularly sewer gas, where the material consists mainly of iron oxide hydrate, to which a loosening material, binding material and additional materials such as calcium carbonate and furnace slack are added, and which contains combined water. Chemically active iron oxide hydrate material such as material which occurs as remnant in pyrogenic bauxite treatment in aluminium manufacture, bog iron ore, material from water works and similar materials can be used as iron oxide hydrate. Sawdust or turf can be used as loosening material to increase the open porosity.

Back to the Future? History, Material Culture and New Materialism

Directory of Open Access Journals (Sweden)

Hans Schouwenburg

2015-04-01

Full Text Available The study of history currently witnesses two markedly different material turns. Some historians are using material artefacts as alternatives to textual sources. Others draw on ‘new materialism’, a new tradition in thought that originated in the field of gender studies. Both groups are trying to move beyond the cultural turn, which has dominated the study of history since the 1980s. However, the first group merely extends the programme of the cultural turn into new domains without rejecting its methods or epistemological foundations. The latter group, on the other hand, provides a new cultural theory. This article demonstrates that the ‘new’ in new materialism is not so much an increased engagement with the material world, but rather a new conceptualization of developing theory and reading texts, which cuts through established dichotomies between matter and meaning or culture and the social. In doing so, a new materialist history can solve some of the problems associated with the cultural turn and the turn to material artefacts.

Materials science and engineering

Energy Technology Data Exchange (ETDEWEB)

Lesuer, D.R.

1997-02-01

During FY-96, work within the Materials Science and Engineering Thrust Area was focused on material modeling. Our motivation for this work is to develop the capability to study the structural response of materials as well as material processing. These capabilities have been applied to a broad range of problems, in support of many programs at Lawrence Livermore National Laboratory. These studies are described in (1) Strength and Fracture Toughness of Material Interfaces; (2) Damage Evolution in Fiber Composite Materials; (3) Flashlamp Envelope Optical Properties and Failure Analysis; (4) Synthesis and Processing of Nanocrystalline Hydroxyapatite; and (5) Room Temperature Creep Compliance of Bulk Kel-E.

Food Packaging Materials

Science.gov (United States)

1978-01-01

The photos show a few of the food products packaged in Alure, a metallized plastic material developed and manufactured by St. Regis Paper Company's Flexible Packaging Division, Dallas, Texas. The material incorporates a metallized film originally developed for space applications. Among the suppliers of the film to St. Regis is King-Seeley Thermos Company, Winchester, Ma'ssachusetts. Initially used by NASA as a signal-bouncing reflective coating for the Echo 1 communications satellite, the film was developed by a company later absorbed by King-Seeley. The metallized film was also used as insulating material for components of a number of other spacecraft. St. Regis developed Alure to meet a multiple packaging material need: good eye appeal, product protection for long periods and the ability to be used successfully on a wide variety of food packaging equipment. When the cost of aluminum foil skyrocketed, packagers sought substitute metallized materials but experiments with a number of them uncovered problems; some were too expensive, some did not adequately protect the product, some were difficult for the machinery to handle. Alure offers a solution. St. Regis created Alure by sandwiching the metallized film between layers of plastics. The resulting laminated metallized material has the superior eye appeal of foil but is less expensive and more easily machined. Alure effectively blocks out light, moisture and oxygen and therefore gives the packaged food long shelf life. A major packaging firm conducted its own tests of the material and confirmed the advantages of machinability and shelf life, adding that it runs faster on machines than materials used in the past and it decreases product waste; the net effect is increased productivity.

Layered materials

Science.gov (United States)

Johnson, David; Clarke, Simon; Wiley, John; Koumoto, Kunihito

2014-06-01

Layered compounds, materials with a large anisotropy to their bonding, electrical and/or magnetic properties, have been important in the development of solid state chemistry, physics and engineering applications. Layered materials were the initial test bed where chemists developed intercalation chemistry that evolved into the field of topochemical reactions where researchers are able to perform sequential steps to arrive at kinetically stable products that cannot be directly prepared by other approaches. Physicists have used layered compounds to discover and understand novel phenomena made more apparent through reduced dimensionality. The discovery of charge and spin density waves and more recently the remarkable discovery in condensed matter physics of the two-dimensional topological insulating state were discovered in two-dimensional materials. The understanding developed in two-dimensional materials enabled subsequent extension of these and other phenomena into three-dimensional materials. Layered compounds have also been used in many technologies as engineers and scientists used their unique properties to solve challenging technical problems (low temperature ion conduction for batteries, easy shear planes for lubrication in vacuum, edge decorated catalyst sites for catalytic removal of sulfur from oil, etc). The articles that are published in this issue provide an excellent overview of the spectrum of activities that are being pursued, as well as an introduction to some of the most established achievements in the field. Clusters of papers discussing thermoelectric properties, electronic structure and transport properties, growth of single two-dimensional layers, intercalation and more extensive topochemical reactions and the interleaving of two structures to form new materials highlight the breadth of current research in this area. These papers will hopefully serve as a useful guideline for the interested reader to different important aspects in this field and

Coated ceramic breeder materials

Science.gov (United States)

Tam, Shiu-Wing; Johnson, Carl E.

1987-01-01

A breeder material for use in a breeder blanket of a nuclear reactor is disclosed. The breeder material comprises a core material of lithium containing ceramic particles which has been coated with a neutron multiplier such as Be or BeO, which coating has a higher thermal conductivity than the core material.

New materials in defence

International Nuclear Information System (INIS)

Khan, Sikandar S.; Khan, Shahid A.; Butt, N.M.

1992-01-01

National defence is very important and always needs new such materials which have technological and socio-economic development of human society. The types of materials used by a society reflect its level of sophistication. These modern materials are basically the same conventional materials but with a greater knowledge content which include superalloys, modern polymers, engineering ceramics and the advanced composite. The production and use of new materials is playing and important role in the recent development in the defence industry. (A.B.)

Reactor Materials Research

Energy Technology Data Exchange (ETDEWEB)

Van Walle, E

2002-04-01

The activities of SCK-CEN's Reactor Materials Research Department for 2001 are summarised. The objectives of the department are: (1) to evaluate the integrity and behaviour of structural materials used in nuclear power industry; (2) to conduct research to unravel and understand the parameters that determine the material behaviour under or after irradiation; (3) to contribute to the interpretation, the modelling of the material behaviour and to develop and assess strategies for optimum life management of nuclear power plant components. The programmes within the department are focussed on studies concerning (1) Irradiation Assisted Stress Corrosion Cracking (IASCC); (2) nuclear fuel; and (3) Reactor Pressure Vessel Steel.

Reactor Materials Research

International Nuclear Information System (INIS)

Van Walle, E.

2002-01-01

The activities of SCK-CEN's Reactor Materials Research Department for 2001 are summarised. The objectives of the department are: (1) to evaluate the integrity and behaviour of structural materials used in nuclear power industry; (2) to conduct research to unravel and understand the parameters that determine the material behaviour under or after irradiation; (3) to contribute to the interpretation, the modelling of the material behaviour and to develop and assess strategies for optimum life management of nuclear power plant components. The programmes within the department are focussed on studies concerning (1) Irradiation Assisted Stress Corrosion Cracking (IASCC); (2) nuclear fuel; and (3) Reactor Pressure Vessel Steel

Modelling of thermoelectric materials

DEFF Research Database (Denmark)

Bjerg, Lasse

In order to discover new good thermoelectric materials, there are essentially two ways. One way is to go to the laboratory, synthesise a new material, and measure the thermoelectric properties. The amount of compounds, which can be investigated this way is limited because the process is time...... consuming. Another approach is to model the thermoelectric properties of a material on a computer. Several crystal structures can be investigated this way without use of much man power. I have chosen the latter approach. Using density functional theory I am able to calculate the band structure of a material....... This band structure I can then use to calculate the thermoelectric properties of the material. With these results I have investigated several materials and found the optimum theoretical doping concentration. If materials with these doping concentrations be synthesised, considerably better thermoelectric...

Polyphosphazine-based polymer materials

Science.gov (United States)

Fox, Robert V.; Avci, Recep; Groenewold, Gary S.

2010-05-25

Methods of removing contaminant matter from porous materials include applying a polymer material to a contaminated surface, irradiating the contaminated surface to cause redistribution of contaminant matter, and removing at least a portion of the polymer material from the surface. Systems for decontaminating a contaminated structure comprising porous material include a radiation device configured to emit electromagnetic radiation toward a surface of a structure, and at least one spray device configured to apply a capture material onto the surface of the structure. Polymer materials that can be used in such methods and systems include polyphosphazine-based polymer materials having polyphosphazine backbone segments and side chain groups that include selected functional groups. The selected functional groups may include iminos, oximes, carboxylates, sulfonates, .beta.-diketones, phosphine sulfides, phosphates, phosphites, phosphonates, phosphinates, phosphine oxides, monothio phosphinic acids, and dithio phosphinic acids.

Glass material oxidation and dissolution system: Converting miscellaneous fissile materials to glass

International Nuclear Information System (INIS)

Forsberg, C.W.; Ferrada, J.J.

1996-01-01

The cold war and the development of nuclear energy have resulted in significant inventories of miscellaneous fissile materials (MFMs). MFMs include (1) plutonium scrap and residue, (2) miscellaneous spent nuclear fuel (SNF), (3) certain hot cell wastes, and (4) many one-of-a-kind materials. Major concerns associated with the long-term management of these materials include: safeguards and nonproliferation issues; health, environment, and safety concerns. waste management requirements; and high storage costs. These issues can be addressed by converting the MFMs to glass for secure, long-term storage or repository disposal; however, conventional glass-making processes require oxide-like feed materials. Converting MFMs to oxide-like materials with subsequent vitrification is a complex and expensive process. A new vitrification process has been invented, the Glass Material Oxidation and Dissolution System (GMODS), which directly converts metals, ceramics, and amorphous solids to glass; oxidizes organics with the residue converted to glass; and converts chlorides to borosilicate glass and a secondary sodium chloride (NaCl) stream. Laboratory work has demonstrated the conversion of cerium (a plutonium surrogate), uranium, Zircaloy, stainless steel, multiple oxides, and other materials to glass. However, significant work is required to develop GMODS further for applications at an industrial scale. If implemented, GMODS will provide a new approach to manage these materials

Hydrogen storage by carbon materials synthesized from oil seeds and fibrous plant materials

Energy Technology Data Exchange (ETDEWEB)

Sharon, Maheshwar; Bhardwaj, Sunil; Jaybhaye, Sandesh [Nanotechnology Research Center, Birla College, Kalyan 421304 (India); Soga, T.; Afre, Rakesh [Graduate School of Engineering, Nagoya Institute of Technology, Nagoya (Japan); Sathiyamoorthy, D.; Dasgupta, K. [Powder Metallurgy Division, BARC, Trombay 400 085 (India); Sharon, Madhuri [Monad Nanotech Pvt. Ltd., A702 Bhawani Tower, Powai, Mumbai 400 076 (India)

2007-12-15

Carbon materials of various morphologies have been synthesized by pyrolysis of various oil-seeds and plant's fibrous materials. These materials are characterized by SEM and Raman. Surface areas of these materials are determined by methylene blue method. These carbon porous materials are used for hydrogen storage. Carbon fibers with channel type structure are obtained from baggas and coconut fibers. It is reported that amongst the different plant based precursors studied, carbon from soyabean (1.09 wt%) and baggas (2.05 wt%) gave the better capacity to store hydrogen at 11kg/m{sup 2} pressure of hydrogen at room temperature. Efforts are made to correlate the hydrogen adsorption capacity with intensities and peak positions of G- and D-band obtained with carbon materials synthesized from plant based precursors. It is suggested that carbon materials whose G-band is around 1575cm{sup -1} and the intensity of D-band is less compared to G-band, may be useful material for hydrogen adsorption study. (author)

Green materials for sustainable development

Science.gov (United States)

Purwasasmita, B. S.

2017-03-01

Sustainable development is an integrity of multidiscipline concept combining ecological, social and economic aspects to construct a liveable human living system. The sustainable development can be support through the development of green materials. Green materials offers a unique characteristic and properties including abundant in nature, less toxic, economically affordable and versatility in term of physical and chemical properties. Green materials can be applied for a numerous field in science and technology applications including for energy, building, construction and infrastructures, materials science and engineering applications and pollution management and technology. For instance, green materials can be developed as a source for energy production. Green materials including biomass-based source can be developed as a source for biodiesel and bioethanol production. Biomass-based materials also can be transformed into advanced functionalized materials for advanced bio-applications such as the transformation of chitin into chitosan which further used for biomedicine, biomaterials and tissue engineering applications. Recently, cellulose-based material and lignocellulose-based materials as a source for the developing functional materials attracted the potential prospect for biomaterials, reinforcing materials and nanotechnology. Furthermore, the development of pigment materials has gaining interest by using the green materials as a source due to their unique properties. Eventually, Indonesia as a large country with a large biodiversity can enhance the development of green material to strengthen our nation competitiveness and develop the materials technology for the future.

Intelligent material systems - The dawn of a new materials age

International Nuclear Information System (INIS)

Rogers, C.A.

1993-01-01

The intelligent material system solution to such engineering problems as the design of a robotic arm borrows directly from biological analogs; materials that behave much as muscles do during contraction can be employed as induced strain actuators which work against the intrinsic structural impedance of the component. Unlike actual human arms, which are jointed, the intelligent structure may be a continuum. The adaptation of structural impedance may be regarded as the most fundamental and consequential concept in the field of intelligent material systems