WorldWideScience

Sample records for j-selected ir-vuv-pfi-pe measurements

  1. High-Resolution Infrared-Vacuum Ultraviolet Photoion and Pulsed Field Ionization-Photoelectron Methods for Spectroscopic Studies of Neutrals and Cations

    Institute of Scientific and Technical Information of China (English)

    Xi Xing; Beth Reed; Mi Kyung Bahng; Peng Wang; Hin Koo Woo; Sun Jong Baek; Chee Shine Lam; Cheuk Yiu Ng

    2008-01-01

    We show that by scanning the frequency of a single mode infrared (IR) optical parametric oscillator (IR- OPO) laser to excite the molecular species of interest and fixing the frequency of a vacuum ultraviolet (VUV) laser to photoionize the IR excited species, high-resolution IR spectra of polyatomic neutrals can be obtained with high sensitivity. The fact that this IR-VUV-photoion (IR-VUV-PI) method is based on VUV photoionization probe, and thus, allows the identification of the neutral IR absorber, makes it applicable for IR spectroscopy measurements of isotopemers, radicals, and clusters, which usually exist as impure samples. The highly resolved IR-VUV-PI measurements achieved using the single mode IR-OPO laser have made possible the selection of single rovibrational states of CH3X (X=Br and I), C2H4, and C3H4 for VUV-pulsed field ionization-photoelectron (VUV-PFI-PE) measurements, resulting in rovibrationally resolved photoelectron spectra for these polyatomic molecules. These experiments show that the signal- to-noise ratios of the IR-VUV-PI and IR-VUV-PFI-PE spectra obtained by employing the high-resolution IR-OPO laser are significantly higher than those observed in previous IR-VUV-PI and IR-VUV-PFI-PE studies using a low-resolution IR-OPO laser. Further improvement in sensitivity of IR-VUV-PI and IR- VUV-PFI-PE measurements by using the collinear arrangement of IR-VUV lasers and molecular beam is discussed.

  2. Measuring $\

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, Jessica Sarah [Univ. of Cambridge (United Kingdom)

    2011-01-01

    The MINOS Experiment consists of two steel-scintillator calorimeters, sampling the long baseline NuMI muon neutrino beam. It was designed to make a precise measurement of the ‘atmospheric’ neutrino mixing parameters, Δm2 atm. and sin2 (2 atm.). The Near Detector measures the initial spectrum of the neutrino beam 1km from the production target, and the Far Detector, at a distance of 735 km, measures the impact of oscillations in the neutrino energy spectrum. Work performed to validate the quality of the data collected by the Near Detector is presented as part of this thesis. This thesis primarily details the results of a vμ disappearance analysis, and presents a new sophisticated fitting software framework, which employs a maximum likelihood method to extract the best fit oscillation parameters. The software is entirely decoupled from the extrapolation procedure between the detectors, and is capable of fitting multiple event samples (defined by the selections applied) in parallel, and any combination of energy dependent and independent sources of systematic error. Two techniques to improve the sensitivity of the oscillation measurement were also developed. The inclusion of information on the energy resolution of the neutrino events results in a significant improvement in the allowed region for the oscillation parameters. The degree to which sin2 (2θ )= 1.0 could be disfavoured with the exposure of the current dataset if the true mixing angle was non-maximal, was also investigated, with an improved neutrino energy reconstruction for very low energy events. The best fit oscillation parameters, obtained by the fitting software and incorporating resolution information were: | Δm2| = 2.32+0.12 -0.08×10-3 eV2 and sin2 (2θ ) > 0.90(90% C.L.). The analysis provides the current world best measurement of the atmospheric neutrino mass

  3. What quantum measurements measure

    Science.gov (United States)

    Griffiths, Robert B.

    2017-09-01

    A solution to the second measurement problem, determining what prior microscopic properties can be inferred from measurement outcomes ("pointer positions"), is worked out for projective and generalized (POVM) measurements, using consistent histories. The result supports the idea that equipment properly designed and calibrated reveals the properties it was designed to measure. Applications include Einstein's hemisphere and Wheeler's delayed choice paradoxes, and a method for analyzing weak measurements without recourse to weak values. Quantum measurements are noncontextual in the original sense employed by Bell and Mermin: if [A ,B ]=[A ,C ]=0 ,[B ,C ]≠0 , the outcome of an A measurement does not depend on whether it is measured with B or with C . An application to Bohm's model of the Einstein-Podolsky-Rosen situation suggests that a faulty understanding of quantum measurements is at the root of this paradox.

  4. Measuring unrecorded measurement

    Science.gov (United States)

    Revzen, M.; Mann, A.

    2016-08-01

    Projective (von Neumann) measurement of an operator (i.e., a dynamical variable) selected from a prescribed set of operators is termed unrecorded measurement (URM) when both the selected operator and the measurement outcome are unknown, i.e., “lost”. Within classical physics a URM is completely inconsequential: the state is unaffected by measurement. Within quantum physics a measurement leaves a mark. The present study provides protocols that allow the retrieval of some of the data lost in a URM. The study is shown as supportive of viewing quantum measurement as made up of both classical-like and pure quantum components.

  5. Measures for Measures

    DEFF Research Database (Denmark)

    Jørgensen, Sune Lehman; A.D., Jackson; Lautrup, B.E.

    2006-01-01

    Are some ways of measuring scientific quality better than others? Sune Lehmann, Andrew D. Jackson and Benny E. Lautrup analyse the reliability of commonly used methods for comparing citation records....

  6. Measure for measure

    Science.gov (United States)

    Weinberger, Peter

    2012-06-01

    The present system of measures for length, weight and capacity (volume) originates from scientific ideas expressed during the French Revolution in 1789. The history of a compatible unit of length, however, turns out to be less of a scientific but rather of a political character. Here reports to the Philosophical Magazine made in the first quarter of the nineteenth century are used to trace the cultural split between meters and inches, and between kilograms and pounds, that can be experienced in many parts of the world.

  7. s Measurements

    Indian Academy of Sciences (India)

    Sunanda Banerjee

    2003-11-01

    The strong coupling constant, s, has been determined from many pure inclusive and semi-inclusive measurements. All these measurements, measured at different scales, are consistent among each other and the measurements can be combined to give s()=0.118 ± 0.003.

  8. Measuring Savings

    OpenAIRE

    Mark Schreiner

    2001-01-01

    Development depends on saving. But what exactly is saving, and how is it measured? This paper defines saving and describes several measures of financial savings. The measures account for the passage of time and for the three stages of saving: putting in (depositing), keeping in (maintaining a balance), and taking out (withdrawing). Together, the different measures capture how people move financial resources through time.

  9. Measuring Happiness

    OpenAIRE

    Richter, Luise; Unger, Cindie

    2015-01-01

    The project at hand aims at outlining if and how happiness measurements can constitute an alternative to the neoliberal measurements of prosperity dominating today. For this purpose, four cases, namely the UN 2013 World Happiness Report and the OECD 2013 Guidelines on measuring subjective well-being as one entity, the Happy Planet Index 2012 from the New Economics Foundation and the report on the Bhutanese Gross National Happiness measurements (2012), have been selected. These perspectives, w...

  10. Measure Lines

    Science.gov (United States)

    Crissman, Sally

    2011-01-01

    One tool for enhancing students' work with data in the science classroom is the measure line. As a coteacher and curriculum developer for The Inquiry Project, the author has seen how measure lines--a number line in which the numbers refer to units of measure--help students not only represent data but also analyze it in ways that generate…

  11. Measurement evaluation

    CERN Document Server

    Boros, A

    1990-01-01

    The information obtained about a measured object is called ``crude'' measurement information and must be related to the conditions under which the measurement took place. Using ``crude'' measurement information as a starting point, evaluation produces physically correctly interpreted data with their estimated (or corrected) error. Although a number of works deal with the evaluation of measurements, they either appeared a long time ago or serve essentially different aims. This book gives a comprehensive and current overview on the basic principles, aids, devices, and methods in the eval

  12. Quantum measurement

    CERN Document Server

    Busch, Paul; Pellonpää, Juha-Pekka; Ylinen, Kari

    2016-01-01

    This is a book about the Hilbert space formulation of quantum mechanics and its measurement theory. It contains a synopsis of what became of the Mathematical Foundations of Quantum Mechanics since von Neumann’s classic treatise with this title. Fundamental non-classical features of quantum mechanics—indeterminacy and incompatibility of observables, unavoidable measurement disturbance, entanglement, nonlocality—are explicated and analysed using the tools of operational quantum theory. The book is divided into four parts: 1. Mathematics provides a systematic exposition of the Hilbert space and operator theoretic tools and relevant measure and integration theory leading to the Naimark and Stinespring dilation theorems; 2. Elements develops the basic concepts of quantum mechanics and measurement theory with a focus on the notion of approximate joint measurability; 3. Realisations offers in-depth studies of the fundamental observables of quantum mechanics and some of their measurement implementations; and 4....

  13. Field Measurements

    CERN Document Server

    Bottura, L

    2004-01-01

    The measurement of the magnetic field is often the final verification of the complex design and fabrication process of a magnetic system. In several cases, when seeking high accuracy, the measurement technique and its realization can result in a considerable effort. This note describes most used measurement techniques, such as nuclear magnetic resonance, fluxmeters and Hall generators, and their typical range of application. In addition some of less commonly used techniques, such as magneto-optical, SQUIDs, or particle beams methods, are listed.

  14. Load Measurements

    DEFF Research Database (Denmark)

    Vesth, Allan; Kock, Carsten Weber

    The report describes Load measurements carried out on a given wind turbine. The aim of the measurement program regarding the loads on the turbine is to verify the basic characteristics of the wind turbine and loads on the blades, the rotor and the tower, using [Ref 1], [Ref2] and [Ref 3]. Regardi...

  15. Load Measurements

    DEFF Research Database (Denmark)

    Kock, Carsten Weber; Vesth, Allan

    The report describes Load measurements carried out on a given wind turbine. The aim of the measurement program regarding the loads on the turbine is to verify the basic characteristics of the wind turbine and loads on the blades, the rotor and the tower, using [Ref 1], [Ref2] and [Ref 3]. Regarding...

  16. Measuring Colour

    CERN Document Server

    Hunt, R W G

    2011-01-01

    The classic authority on colour measurement now fully revised and updated with the latest CIE recommendations The measurement of colour is of major importance in many commercial applications, such as the textile, paint, and foodstuff industries; as well as having a significant role in the lighting, paper, printing, cosmetic, plastics, glass, chemical, photographic, television, transport, and communication industries. Building upon the success of earlier editions, the 4th edition of Measuring Colour has been updated throughout with new chapters on colour rendering by light sources; colorimetry

  17. Mechanical measurements

    CERN Document Server

    Venkateshan, S P

    2015-01-01

    The first edition of this book was co-published by Ane Books India, and CRC Press in 2008. This second edition is an enlarged version of the web course developed by the author at IIT Madras, and also a modified and augmented version of the earlier book.  Major additions/modifications presented are in the treatment of errors in measurement, temperature measurement, measurement of thermo-physical properties, and data manipulation. Many new worked examples have been introduced in this new and updated second edition. 

  18. Diversity Measures

    Directory of Open Access Journals (Sweden)

    MSc. Mentor Ademaj

    2012-06-01

    Full Text Available Diversity measures are a type of non-criminal measures foreseen in the Chapter IV of the Code of Juvenile Justice, which may be imposed on juvenile perpetrators of criminal acts. These measures can be applied in cases of minor offenses, for which is foreseen the criminal sanction with a fine or imprisonment up to three years or for criminal offenses committed by negligence for which is foreseen the sentence up to five years of imprisonment, except those cases that result in death. With the imposition of these measures is intended to prevent criminal proceedings against juveniles whenever is possible, rehabilitation and reintegration of juvenile in his/her community and the prevention of recidivist behaviour. Competent authority to impose them is the public prosecutor, the juvenile judge and juvenile court. And they are executed by the Kosovo Correctional Service.

  19. Horizon measures

    KAUST Repository

    Zhang, Eugene

    2016-11-28

    In this paper we seek to answer the following question: where do contour lines and visible contour lines (silhouette) tend to occur in a 3D surface. Our study leads to two novel shape descriptors, the horizon measure and the visible horizon measure, which we apply to the visualization of 3D shapes including archeological artifacts. In addition to introducing the shape descriptors, we also provide a closed-form formula for the horizon measure based on classical spherical geometry. To compute the visible horizon measure, which depends on the exact computation of the surface visibility function, we instead of provide an image-based approach which can process a model with high complexity within a few minutes.

  20. Interoperability Measurement

    Science.gov (United States)

    2008-08-01

    measurement methods (non-maturity model-based methods in italics, maturity-based methods in boldface) .................... 11  Figure 3. LISI ...OIM LISI , IAM QoIM SoIM Figure 2. Chronology of published interoperability measurement methods (non-maturity model- based methods in italics... method called Levels of Information System Interoperability ( LISI ) (Figure 3). (Ibid) This method was eventually formalized and mandated in CJCSI

  1. Measuring needs

    Directory of Open Access Journals (Sweden)

    Laura Murianni

    2008-06-01

    Full Text Available The interest in measuring the health of populations, through measuring the demand and offers of health care, is deeply rooted in history. Population health indicators in use today are built upon from mortality measures from the 1500s; regular census information starting from the 1800s; civil registration records of vital statistics commencing in the 1850s; regular national surveys, which were first initiated in the 1950s; and health system and other administrative databases used widely since the 1960s. The ancient Greeks believed that the God of medicine had two daughters: Hygeia and Panacea, the first was the goddess of prevention and wellness, while the second was the goddess of treatment. Thus suggesting that people have long believed that there is more to health than health care. Today the actual concept of population health recognizes many interconnected aspects of society, the environment, and individuals all contributing to health. To increase opportunities for comparability, more valid, comprehensive and standardized ways of measuring and reporting on population health indicators are needed. The use of health indicators contributes to overall population health goals, namely improving the health populations, reducing health inequalities and measuring the performance of health care system. The objective of performance assessment is to provide governments and populations with information about the state of their health care system.

  2. When Measurement Benefits the Measured

    Science.gov (United States)

    2014-04-23

    5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Carnegie Mellon University ,Software Engineering Institute,Pittsburgh,PA...15213 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS(ES) 10. SPONSOR/MONITOR’S ACRONYM(S) 11. SPONSOR...versionone.com/assets/ img /files/CHAOSManifesto2013.pdf 4 When Measurement Benefits the Measured Kasunic & Nichols, April 23, 2014 © 2014 Carnegie Mellon

  3. Measurement uncertainty.

    Science.gov (United States)

    Bartley, David; Lidén, Göran

    2008-08-01

    The reporting of measurement uncertainty has recently undergone a major harmonization whereby characteristics of a measurement method obtained during establishment and application are combined componentwise. For example, the sometimes-pesky systematic error is included. A bias component of uncertainty can be often easily established as the uncertainty in the bias. However, beyond simply arriving at a value for uncertainty, meaning to this uncertainty if needed can sometimes be developed in terms of prediction confidence in uncertainty-based intervals covering what is to be measured. To this end, a link between concepts of accuracy and uncertainty is established through a simple yet accurate approximation to a random variable known as the non-central Student's t-distribution. Without a measureless and perpetual uncertainty, the drama of human life would be destroyed. Winston Churchill.

  4. Microwave Measurements

    CERN Document Server

    Skinner, A D

    2007-01-01

    The IET has organised training courses on microwave measurements since 1983, at which experts have lectured on modern developments. Their lecture notes were first published in book form in 1985 and then again in 1989, and they have proved popular for many years with a readership beyond those who attended the courses. The purpose of this third edition of the lecture notes is to bring the latest techniques in microwave measurements to this wider audience. The book begins with a survey of the theory of current microwave circuits and continues with a description of the techniques for the measureme

  5. SAFETY MEASURES

    CERN Multimedia

    Relations with the Host States Service; Tel. 75152

    2001-01-01

    Following the recent terrorist attacks, the French authorities have introduced increased-vigilance measures («Vigipirate renforcé») as part of their prevention of terrorism campaign and have expressed the wish to extend these measures to the French part of the CERN site. The Organization has acceded to this request with the understanding that its international status will be respectd and has granted the French Gendarmerie right of access to the Prévessin site and to the LEP/LHC sites on French territory.

  6. Load Measurements

    DEFF Research Database (Denmark)

    Kock, Carsten Weber; Vesth, Allan

    The report describes Load measurements carried out on a given wind turbine. The aim of the measurement program regarding the loads on the turbine is to verify the basic characteristics of the wind turbine and loads on the blades, the rotor and the tower, using [Ref 1], [Ref2] and [Ref 3]. Regarding...... the fatigue loads, the rotor, blades and tower moments are presented. The fatigue loads are evaluated using rainflow counting described in detail in Ref. [1]. The 1Hz equivalent load ranges are calculated at different wind speeds. All information regarding the instrumentation is collected in [ref 4] and [ref...

  7. Measuring Up

    Science.gov (United States)

    Hart, Holly; Healey, Kaleen; Sporte, Susan E.

    2014-01-01

    Moving teacher evaluation systems from measuring teachers' performance to improving their practice requires much greater attention to communication and support. In the fall of 2012, Chicago Public Schools (CPS) instituted a sweeping reform of its teacher evaluation system with the introduction of REACH Students (Recognizing Educators Advancing…

  8. Happiness measures

    NARCIS (Netherlands)

    R. Veenhoven (Ruut)

    2014-01-01

    markdownabstract__Abstract__ The word “happiness” is used for different meanings, and these meanings all require different measures. This lemma is about happiness in the sense of subjective enjoyment of one’s life as a whole that is also called “life satisfaction.” Two “components” of

  9. Measuring Resilience.

    Science.gov (United States)

    Hoffman, Robert R; Hancock, P A

    2017-06-01

    As human factors and ergonomics (HF/E) moves to embrace a greater systems perspective concerning human-machine technologies, new and emergent properties, such as resilience, have arisen. Our objective here is to promote discussion as to how to measure this latter, complex phenomenon. Resilience is now a much-referenced goal for technology and work system design. It subsumes the new movement of resilience engineering. As part of a broader systems approach to HF/E, this concept requires both a definitive specification and an associated measurement methodology. Such an effort epitomizes our present work. Using rational analytic and synthetic methods, we offer an approach to the measurement of resilience capacity. We explicate how our proposed approach can be employed to compare resilience across multiple systems and domains, and emphasize avenues for its future development and validation. Emerging concerns for the promise and potential of resilience and associated concepts, such as adaptability, are highlighted. Arguments skeptical of these emerging dimensions must be met with quantitative answers; we advance one approach here. Robust and validated measures of resilience will enable coherent and rational discussions of complex emergent properties in macrocognitive system science.

  10. Measurement of \

    CERN Document Server

    Aguilar-Arevalo, A A; Bazarko, A O; Brice, S J; Brown, B C; Bugel, L; Cao, J; Coney, L; Conrad, J M; Cox, D C; Curioni, A; Djurcic, Z; Finley, D A; Fleming, B T; Ford, R; Garcia, F G; Garvey, G T; Gonzales, J; Grange, J; Green, C; Green, J A; Hart, T L; Hawker, E; Imlay, R; Johnson, R A; Karagiorgi, G; Kasper, P; Katori, T; Kobilarcik, T; Kourbanis, I; Koutsoliotas, S; Laird, E M; Linden, S K; Link, J M; Liu, Y; Louis, W C; Mahn, K B M; Marsh, W; Mauger, C; McGary, V T; McGregor, G; Metcalf, W; Meyers, P D; Mills, F; Mills, G B; Monroe, J; Moore, C D; Mousseau, J; Nelson, R H; Nienaber, P; Nowak, J A; Osmanov, B; Ouedraogo, S; Patterson, R B; Pavlovic, Z; Perevalov, D; Polly, C C; Prebys, E; Raaf, J L; Ray, H; Roe, B P; Russell, A D; Sandberg, V; Schirato, R; Schmitz, D; Shaevitz, M H; Shoemaker, F C; Smith, D; Soderberg, M; Sorel, M; Spentzouris, P; Spitz, J; Stancu, I; Stefanski, R J; Sung, M; Tanaka, H A; Tayloe, R; Tzanov, M; Van de Water, R G; Wascko, M O; White, D H; Wilking, M J; Yang, H J; Zeller, G P; Zimmerman, E D

    2009-01-01

    MiniBooNE reports the first absolute cross sections for neutral current single \\pi^0 production on CH_2 induced by neutrino and antineutrino interactions measured from the largest sets of NC \\pi^0 events collected to date. The principal result consists of differential cross sections measured as functions of \\pi^0 momentum and \\pi^0 angle averaged over the neutrino flux at MiniBooNE. We find total cross sections of (4.76+/-0.05_{stat}+/-0.40_{sys})*10^{-40} cm^2/nucleon at a mean energy of =808 MeV and (1.48+/-0.05_{stat}+/-0.14_{sys})*10^{-40} cm^2/nucleon at a mean energy of =664 MeV for \

  11. Measurement of \

    Energy Technology Data Exchange (ETDEWEB)

    Aguilar-Arevalo, A.A.; /Mexico U., ICN; Anderson, C.E.; /Yale U.; Bazarko, A.O.; /Princeton U.; Brice, S.J.; /Fermilab; Brown, B.C.; /Fermilab; Bugel, L.; /Columbia U.; Cao, J.; /Michigan U.; Coney, L.; /Columbia U.; Conrad, J.M.; /MIT; Cox, D.C.; /Indiana U.; Curioni, A.; /Yale U. /Columbia U.

    2009-11-01

    MiniBooNE reports the first absolute cross sections for neutral current single {pi}{sup 0} production on CH{sub 2} induced by neutrino and antineutrino interactions measured from the largest sets of NC {pi}{sup 0} events collected to date. The principal result consists of differential cross sections measured as functions of {pi}{sup 0} momentum and {pi}{sup 0} angle averaged over the neutrino flux at MiniBooNE. We find total cross sections of (4.76 {+-} 0.05{sub stat} {+-} 0.40{sub sys}) x 10{sup -40} cm{sup 2}/nucleon at a mean energy of = 808 MeV and (1.48 {+-} 0.05{sub stat} {+-} 0.14{sub sys}) x 10{sup -40} cm{sup 2}/nucleon at a mean energy of = 664 MeV for {nu}{sub {mu}} and {bar {nu}}{sub {mu}} induced production, respectively. In addition, we have included measurements of the neutrino and antineutrino total cross sections for incoherent exclusive NC 1{pi}{sup 0} production corrected for the effects of final state interactions to compare to prior results.

  12. Antenna Measurement

    OpenAIRE

    Picard, Dominique

    2010-01-01

    Currently it is possible to measure all the characteristics of an antenna with a good accuracy. Far-field ranges do not have a very good accuracy, due to parasitic reflections for the outdoor ranges and because of the limited distance between the source antenna and the tested antenna for the indoor ranges. The compact range allows one to obtain a direct farfield cut in a relatively short time. The near-field techniques are the most accurate and the most convenient for global antenna radiation...

  13. Measuring Fractality

    Directory of Open Access Journals (Sweden)

    Tatjana eStadnitski

    2012-05-01

    Full Text Available When investigating fractal phenomena, the following questions are fundamental for the applied researcher: (1 What are essential statistical properties of 1/f noise? (2 Which estimators are available for measuring fractality? (3 Which measurement instruments are appropriate and how are they applied? The purpose of this article is to give clear and comprehensible answers to these questions. First, theoretical characteristics of a fractal pattern (self-similarity, long memory, power law and the related fractal parameters (the Hurst coefficient, the scaling exponent, the fractional differencing parameter d of the ARFIMA methodology, the power exponent of the spectral analysis are discussed. Then, estimators of fractal parameters from different software packages commonly used by applied researchers (R, SAS, SPSS are introduced and evaluated. Advantages, disadvantages, and constrains of the popular estimators are illustrated by elaborate examples. Finally, crucial steps of fractal analysis (plotting time series data, autocorrelation and spectral functions; performing stationarity tests; choosing an adequate estimator; estimating fractal parameters; distinguishing fractal processes from short memory patterns are demonstrated with empirical time series.

  14. Measuring fractality.

    Science.gov (United States)

    Stadnitski, Tatjana

    2012-01-01

    WHEN INVESTIGATING FRACTAL PHENOMENA, THE FOLLOWING QUESTIONS ARE FUNDAMENTAL FOR THE APPLIED RESEARCHER: (1) What are essential statistical properties of 1/f noise? (2) Which estimators are available for measuring fractality? (3) Which measurement instruments are appropriate and how are they applied? The purpose of this article is to give clear and comprehensible answers to these questions. First, theoretical characteristics of a fractal pattern (self-similarity, long memory, power law) and the related fractal parameters (the Hurst coefficient, the scaling exponent α, the fractional differencing parameter d of the autoregressive fractionally integrated moving average methodology, the power exponent β of the spectral analysis) are discussed. Then, estimators of fractal parameters from different software packages commonly used by applied researchers (R, SAS, SPSS) are introduced and evaluated. Advantages, disadvantages, and constrains of the popular estimators ([Formula: see text] power spectral density, detrended fluctuation analysis, signal summation conversion) are illustrated by elaborate examples. Finally, crucial steps of fractal analysis (plotting time series data, autocorrelation, and spectral functions; performing stationarity tests; choosing an adequate estimator; estimating fractal parameters; distinguishing fractal processes from short-memory patterns) are demonstrated with empirical time series.

  15. Multipath Measurements

    Science.gov (United States)

    1974-08-01

    positioned to the elevation desired for the measure- men , sequences and reflectec pulse amplitude levels recorded as a function of time as discussed...31 NRNOBINT(XNR*IG) YNBNS«NRN6 1F(YWHN0,LT,XNBNG)MH»JC»’’»NG«1 * 1F(RFS0LTN.U1 .» HVP »Hf2nN^NC»NCC 9 GO TO «oOO 821 00 850 J»l,NBE»MS CALL...RRHOARYflO) COMMON/TC*INP/GIR(«),G2P(«) CUMMnN/TC*!N0/r.2nPf*O,Gl0P(«) CüMMON/OERV/P*RH*V(l?7),* HVP »Hf5)»CBETZ0(l0),C»0.G20(J0)iNP» 1 OIROOH.DFLT

  16. Measurements and Terminology of Different Measure Methods

    Institute of Scientific and Technical Information of China (English)

    FANG Fang; ZHANG Wei-yuan; ZHANG Wen-bin

    2005-01-01

    Body measuring is very important for garment sizing and pattern making. In this paper, we study the difference of the landmarks between the traditional method and 3D scanner and we also select the 19 circumference measurements,29 height and length measurements, 18 breadth and depth measurements and 3 other measurements, which are quite important in fashion body measuring, to compare the terminology of them in these two measuring method. 3D scanners seem better than the traditional method on these aspects, which are the number of measurements, speed,privacy and data accuracy, but they are limited on measuring posture. And there is no uniform standard for the scanners and the definitions of the measurements in the scanners are diversified.

  17. Time change, jumping measure and Feller measure

    OpenAIRE

    He, Ping

    2007-01-01

    In this paper, we shall investigate some potential theory for time change of Markov processes. Under weak duality, it is proved that the jumping measure and Feller measure are actually independent of time change, and the jumping measure of a time changed process induced by a PCAF supported on $V$ coincides with the sum of the Feller measure on $V$ and the trace of the original jumping measure on $V$.

  18. Positive motivic measures are counting measures

    CERN Document Server

    Ellenberg, Jordan S

    2009-01-01

    Let K be a field. A positive motivic measure on the Grothendieck ring K_0(Var_K) is a homomorphism from K_0(Var_K) to the real numbers assigning a nonnegative value to every variety. In this note we show that the only positive motivic measures are the counting measures: measures on K_0(Var_{F_q}) which send a variety to its number of rational points over some fixed finite extension of F_q.

  19. Work measurement as a generalized quantum measurement.

    Science.gov (United States)

    Roncaglia, Augusto J; Cerisola, Federico; Paz, Juan Pablo

    2014-12-19

    We present a new method to measure the work w performed on a driven quantum system and to sample its probability distribution P(w). The method is based on a simple fact that remained unnoticed until now: Work on a quantum system can be measured by performing a generalized quantum measurement at a single time. Such measurement, which technically speaking is denoted as a positive operator valued measure reduces to an ordinary projective measurement on an enlarged system. This observation not only demystifies work measurement but also suggests a new quantum algorithm to efficiently sample the distribution P(w). This can be used, in combination with fluctuation theorems, to estimate free energies of quantum states on a quantum computer.

  20. MEASURE FOR MEASURE: A THRICE TOLD TALE

    Directory of Open Access Journals (Sweden)

    HALIMAH MOHAMED ALI

    2009-01-01

    Full Text Available This paper argues that Measure for Measure is a difficult play to perform because it has problematic themes, especially the theme of sexuality, that clash with the way of life and thinking of contemporary society. As such, any director who chooses to stage it must consider these difficulties and how to present them in a natural manner without making the audience feel that the whole production is contrived. The directors of the two major productions discussed in this paper tried their best to present a Measure for Measure that would be acceptable to the modern society. It is evident that there are many interpretations of the Duke and Isabella's characters and also of Isabella's reaction to the Duke's proposal at the end of the play. It can be concluded that no interpretation is wrong because each actor or director brings with him his own reading of the play, and every reading has been influenced by other performances and textual criticisms. Since Measure for Measure is a thematically rich play, it should not be confined to a single interpretation. The different performances of Measure for Measure have proven that theatre is experimental as well as ageless. Because it is a brilliant play with a myriad of interpretations, Measure for Measure will not cease to be a favourite for directors in times to come. It is not wrong to predict that fans of Shakespeare in general and of Measure for Measure in particular can look forward to many more productions.For experienced Shakespeare observers all performances are thrice-told tales. The perceiving eye absorbs the performance even as the mind's eye attends to the text. Both are augmented by the inner ear buzzing with those other voices, both critical and dramatic, carried by the observer into the theatre.(Crowl, Samuel 1992: 3

  1. Measurements on Hearing

    DEFF Research Database (Denmark)

    Poulsen, Torben

    1996-01-01

    Background material for measurements of hearing for grammar school pupils. The note gives the necessary background for the exercise 'Measurement on Hearing'. The topics comprise sound and decibel, the ear, basic psychoacoustics, hearing threshold, audiometric measurement methods, speech and speech...

  2. Measuring Test Measurement Error: A General Approach

    Science.gov (United States)

    Boyd, Donald; Lankford, Hamilton; Loeb, Susanna; Wyckoff, James

    2013-01-01

    Test-based accountability as well as value-added asessments and much experimental and quasi-experimental research in education rely on achievement tests to measure student skills and knowledge. Yet, we know little regarding fundamental properties of these tests, an important example being the extent of measurement error and its implications for…

  3. Semiconductor Electrical Measurements Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The Semiconductor Electrical Measurements Laboratory is a research laboratory which complements the Optical Measurements Laboratory. The laboratory provides for Hall...

  4. Are the Weak Measurements Really Measurements?

    Directory of Open Access Journals (Sweden)

    Dmitri Sokolovski

    2013-05-01

    Full Text Available Weak measurements can be seen as an attempt at answering the Which way? question without destroying interference between the pathways involved. Unusual mean values obtained in such measurements represent the response of a quantum system to this forbidden question, in which the true composition of virtual pathways is hidden from the observer. Such values indicate a failure of a measurement where the uncertainty principle says it must fail, rather than provide an additional insight into physical reality.Quanta 2013; 2: 50–57.

  5. QCD measurements in ATLAS

    CERN Document Server

    Llorente Merino, Javier; The ATLAS collaboration

    2017-01-01

    Several measurements in jet and photon physics are presented. The jet physics results include measurements of jet cross sections as well as various measurements on jet substructure and the precise determination of the strong coupling constant. Photon results include the measurements of several processes involving photons (inclusive, diphoton, photon + jet)

  6. Completely random signed measures

    DEFF Research Database (Denmark)

    Hellmund, Gunnar

    Completely random signed measures are defined, characterized and related to Lévy random measures and Lévy bases.......Completely random signed measures are defined, characterized and related to Lévy random measures and Lévy bases....

  7. Can Virtue Be Measured?

    Science.gov (United States)

    Curren, Randall; Kotzee, Ben

    2014-01-01

    This article explores some general considerations bearing on the question of whether virtue can be measured. What is moral virtue? What are measurement and evaluation, and what do they presuppose about the nature of what is measured or evaluated? What are the prospective contexts of, and purposes for, measuring or evaluating virtue, and how would…

  8. Measuring agricultural policy bias

    DEFF Research Database (Denmark)

    Jensen, Henning Tarp; Robinson, Sherman; Tarp, Finn

    2010-01-01

    Measurement is a key issue in the literature on price incentive bias induced by trade policy. We introduce a general equilibrium measure of the relative effective rate of protection, which generalizes earlier protection measures. For our fifteen sample countries, results indicate that the agricul......Measurement is a key issue in the literature on price incentive bias induced by trade policy. We introduce a general equilibrium measure of the relative effective rate of protection, which generalizes earlier protection measures. For our fifteen sample countries, results indicate...... protection measure is therefore uniquely suited to capture the full impact of trade policies on relative agricultural price incentives....

  9. Evaluating Measurement Accuracy

    CERN Document Server

    Rabinovich, Semyon G

    2010-01-01

    The goal of Evaluating Measurement Accuracy: A Practical Approach is to present methods for estimating the accuracy of measurements performed in industry, trade, and scientific research. Although multiple measurements are the focus of current theory, single measurements are the ones most commonly used. This book answers fundamental questions not addressed by present theory, such as how to discover the complete uncertainty of a measurement result. In developing a general theory of processing experimental data, this book, for the first time, presents the postulates of the theory of measurements. It introduces several new terms and definitions about the relationship between the accuracy of measuring instruments and measurements utilizing these instruments. It also offers well-grounded and practical methods for combining the components of measurement inaccuracy. From developing the theory of indirect measurements to proposing new methods of reduction in place of the traditional ones, this work encompasses the ful...

  10. How to Measure the Quantum Measure

    CERN Document Server

    Frauca, Álvaro Mozota

    2016-01-01

    The histories-based framework of Quantum Measure Theory assigns a generalized probability or measure $\\mu(E)$ to every (suitably regular) set $E$ of histories. Even though $\\mu(E)$ cannot in general be interpreted as the expectation value of a selfadjoint operator (or POVM), we describe an arrangement which makes it possible to determine $\\mu(E)$ experimentally for any desired $E$. Taking, for simplicity, the system in question to be a particle passing through a series of Stern-Gerlach devices or beam-splitters, we show how to couple a set of ancillas to it, and then to perform on them a suitable unitary transformation followed by a final measurement, such that the probability of a final outcome of "yes" is related to $\\mu(E)$ by a known factor of proportionality. Finally, we discuss in what sense a positive outcome of the final measurement should count as a minimally disturbing verification that the microscopic event $E$ actually happened.

  11. Finding generically stable measures

    CERN Document Server

    Simon, Pierre

    2010-01-01

    We discuss two constructions for obtaining generically stable Keisler measures in an NIP theory. First, we show how to symmetrize an arbitrary invariant measure to obtain a generically stable one from it. Next, we show that suitable sigma-additive probability measures give rise to generically stable measures. Also included is a proof that generically stable measures over o-minimal theories and the p-adics are smooth.

  12. Temperature Measurements in the Magnetic Measurement Facility

    Energy Technology Data Exchange (ETDEWEB)

    Wolf, Zachary

    2010-12-13

    Several key LCLS undulator parameter values depend strongly on temperature primarily because of the permanent magnet material the undulators are constructed with. The undulators will be tuned to have specific parameter values in the Magnetic Measurement Facility (MMF). Consequently, it is necessary for the temperature of the MMF to remain fairly constant. Requirements on undulator temperature have been established. When in use, the undulator temperature will be in the range 20.0 {+-} 0.2 C. In the MMF, the undulator tuning will be done at 20.0 {+-} 0.1 C. For special studies, the MMF temperature set point can be changed to a value between 18 C and 23 C with stability of {+-}0.1 C. In order to ensure that the MMF temperature requirements are met, the MMF must have a system to measure temperatures. The accuracy of the MMF temperature measurement system must be better than the {+-}0.1 C undulator tuning temperature tolerance, and is taken to be {+-}0.01 C. The temperature measurement system for the MMF is under construction. It is similar to a prototype system we built two years ago in the Sector 10 alignment lab at SLAC. At that time, our goal was to measure the lab temperature to {+-}0.1 C. The system has worked well for two years and has maintained its accuracy. For the MMF system, we propose better sensors and a more extensive calibration program to achieve the factor of 10 increase in accuracy. In this note we describe the measurement system under construction. We motivate our choice of system components and give an overview of the system. Most of the software for the system has been written and will be discussed. We discuss error sources in temperature measurements and show how these errors have been dealt with. The calibration system is described in detail. All the LCLS undulators must be tuned in the Magnetic Measurement Facility at the same temperature to within {+-}0.1 C. In order to ensure this, we are building a system to measure the temperature of the

  13. Power Curve Measurements REWS

    DEFF Research Database (Denmark)

    Gómez Arranz, Paula; Vesth, Allan

    This report describes the power curve measurements carried out on a given wind turbine in a chosen period. The measurements were carried out following the measurement procedure in the draft of IEC 61400-12-1 Ed.2 [1], with some deviations mostly regarding uncertainty calculation. Here, the refere......This report describes the power curve measurements carried out on a given wind turbine in a chosen period. The measurements were carried out following the measurement procedure in the draft of IEC 61400-12-1 Ed.2 [1], with some deviations mostly regarding uncertainty calculation. Here......, the reference wind speed used in the power curve is the equivalent wind speed obtained from lidar measurements at several heights between lower and upper blade tip, in combination with a hub height meteorological mast. The measurements have been performed using DTU’s measurement equipment, the analysis...

  14. Quality measurement in healthcare.

    Science.gov (United States)

    Lazar, Eliot J; Fleischut, Peter; Regan, Brian K

    2013-01-01

    Measurement is the basis for assessing potential improvements in healthcare quality. Measures may be classified into four categories: volume, structure, outcome, and process (VSOP). Measures of each type should be used with a full understanding of their cost and benefit. Although volume and structure measures are easily collected, impact on healthcare results is not always clear. Process measures are generally more difficult and expensive to collect, and the relationship between process and outcomes is only recently being explored. Knowledge of measure types and relationships among them, as well as emerging evidence on the role of patient satisfaction, must be used to guide improvements and ultimately for demonstrating value in healthcare.

  15. Power Curve Measurements REWS

    DEFF Research Database (Denmark)

    Gómez Arranz, Paula; Villanueva, Héctor

    This report describes the power curve measurements carried out on a given wind turbine in a chosen period. The measurements were carried out following the measurement procedure in the draft of IEC 61400-12-1 Ed.2 [1], with some deviations mostly regarding uncertainty calculation. Here......, the reference wind speed used in the power curve is the equivalent wind speed obtained from lidar measurements at several heights between lower and upper blade tip, in combination with a hub height meteorological mast. The measurements have been performed using DTU’s measurement equipment, the analysis...

  16. MDS Quality Measures

    Data.gov (United States)

    U.S. Department of Health & Human Services — A list of the quality measures displayed on Nursing Home Compare, excluding Measures of Rehospitalization, Emergency Room Visit, and Community Discharge. Each row...

  17. Global Climate Measurement Project

    Data.gov (United States)

    National Aeronautics and Space Administration — When investigating the processes in the atmosphere, measurement of trace gas concentrations is essential.  However, measuring trace gas concentrations is...

  18. Measuring Physical Activity Intensity

    Medline Plus

    Full Text Available ... Older Adults Overcoming Barriers Measuring Physical Activity Intensity Target Heart Rate & Estimated Maximum Heart Rate Perceived Exertion ( ... a heavy backpack Other Methods of Measuring Intensity Target Heart Rate and Estimated Maximum Heart Rate Perceived ...

  19. Structural Measures - Hospital

    Data.gov (United States)

    U.S. Department of Health & Human Services — A list of hospitals and the availability of structural measures at that hospital. A structural measure reflects the environment in which hospitals care for patients....

  20. Developing Effective Performance Measures

    Science.gov (United States)

    2014-10-14

    University When Performance Measurement Goes Bad Laziness Vanity Narcissism Too Many Pettiness Inanity 52 Developing Effective...Kasunic, October 14, 2014 © 2014 Carnegie Mellon University Narcissism Measuring performance from the organization’s point of view, rather than from

  1. Ethernet traffic measurement

    OpenAIRE

    Santschi, Yann; Corthay, François

    2012-01-01

    The goal of this project is to create a FPGA Ethernet traffic measurement point and interface it with an existing measurement network, named DPMI, that is developed in Blekinge Institute of Technology.

  2. Emissions & Measurements - Black Carbon

    Science.gov (United States)

    Emissions and Measurement (EM) research activities performed within the National Risk Management Research Lab NRMRL) of EPA's Office of Research and Development (ORD) support measurement and laboratory analysis approaches to accurately characterize source emissions, and near sour...

  3. Conductivity Measurements of Silverpastes

    Directory of Open Access Journals (Sweden)

    M. Dirix

    2010-01-01

    Full Text Available The development of three-dimensional printed circuit boards requires research on new materials which can easily be deformed. Conducting pastes are well suited for deformation even after they are applied to the dielectric carrier. This paper deals with measurements of the electrical conductivity of these conducting pastes. Two different conductivity measurement techniques are explained and carried out. The resulting measurements give an overview of the conductivity of several measured samples.

  4. Foundations of measurement

    CERN Document Server

    Suppes, Patrick

    1989-01-01

    Foundations of Measurement offers the most coherently organized treatment of the topics and issues central to measurement. Much of the research involved has been scattered over several decades and a multitude of journals--available in many instances only to specialties. With the publication of Volumes two and three of this important work, Foundations of Measurement is the most comprehensive presentation in the area of measurement.

  5. Software engineering measurement

    CERN Document Server

    Munson, PhD, John C

    2003-01-01

    By demonstrating how to develop simple experiments for the empirical validation of theoretical research and showing how to convert measurement data into meaningful and valuable information, this text fosters more precise use of software measurement in the computer science and software engineering literature. Software Engineering Measurement shows you how to convert your measurement data to valuable information that can be used immediately for software process improvement.

  6. Spectrum and network measurements

    CERN Document Server

    Witte, Robert A

    2014-01-01

    This new edition of Spectrum and Network Measurements enables readers to understand the basic theory, relate it to measured results, and apply it when creating new designs. This comprehensive treatment of frequency domain measurements successfully consolidates all the pertinent theory into one text. It covers the theory and practice of spectrum and network measurements in electronic systems. It also provides thorough coverage of Fourier analysis, transmission lines, intermodulation distortion, signal-to-noise ratio and S-parameters.

  7. Top quark measurements

    CERN Document Server

    Iorio, Alberto Orso Maria

    2016-01-01

    Measurements of top quarks from Run-I and Run-II of the LHC are presented. Results on dif- ferential and inclusive top quark production cross sections, measured by the ATLAS, CMS and LHCb experiments, and measurements of top quark properties and mass are reported.

  8. Measurement of Color Texture

    NARCIS (Netherlands)

    Hoang, M.A.; Geusebroek, J.M.; Chantler, M.

    2002-01-01

    In computer vision, measurement of image properties such as color or texture is essential. In this paper, we propose a solid framework for the local measurement of texture in color images. We give a physical basis for the integration of the well-known Gabor filters with the measurement of color. Our

  9. Measurement of Color Texture

    NARCIS (Netherlands)

    Hoang, M.A.; Geusebroek, J.M.; Deprettere, E.F.; Belloum, A.; Heijnsdijk, J.W.J.; van der Stappen, F.

    2002-01-01

    In computer vision, measurement of image properties such as color or texture is essential. However, existing methods for measuring color and texture in combination are not well-defined neither from a measurement theoretical basis nor from a physical point of view. We propose a solid framework for th

  10. Coordinate measuring machines

    DEFF Research Database (Denmark)

    De Chiffre, Leonardo

    This document is used in connection with three exercises of 2 hours duration as a part of the course GEOMETRICAL METROLOGY AND MACHINE TESTING. The exercises concern three aspects of coordinate measuring: 1) Measuring and verification of tolerances on coordinate measuring machines, 2) Traceability...

  11. Measurement System & Calibration report

    DEFF Research Database (Denmark)

    Kock, Carsten Weber; Vesth, Allan

    This Measurement System & Calibration report is describing DTU’s measurement system installed at a specific wind turbine. A major part of the sensors has been installed by others (see [1]) the rest of the sensors have been installed by DTU. The results of the measurements, described in this report...

  12. Measurement Practice Guide

    Science.gov (United States)

    College and Career Readiness and Success Center, 2014

    2014-01-01

    This discussion guide is part of a larger practice guide designed to help state education agencies (SEAs) define measurement goals, select college and career readiness measures and indicators designed to support those goals, and use the data gathered with those measures and indicators to make informed decisions about college and career readiness…

  13. Teaching Measurement with Literature

    Science.gov (United States)

    Bintz, William P.; Moore, Sara D.

    2011-01-01

    Measurement is a difficult concept for many children. Trend data from the National Association of Educational Progress (NAEP) indicate that student achievement with measurement is disappointing, given the amount of instructional time it receives in K-grade 5. In an attempt to address the problem of student achievement with measurement, the authors…

  14. Measurement and Research Tools.

    Science.gov (United States)

    1997

    This document contains four papers from a symposium on measurement and research tools for human resource development (HRD). "The 'Best Fit' Training: Measure Employee Learning Style Strengths" (Daniel L. Parry) discusses a study of the physiological aspect of sensory intake known as modality, more specifically, modality as measured by…

  15. Power Curve Measurements

    DEFF Research Database (Denmark)

    Vesth, Allan; Kock, Carsten Weber

    The report describes power curve measurements carried out on a given wind turbine. The measurements are carried out in accordance to Ref. [1]. A site calibration has been carried out; see Ref. [2], and the measured flow correction factors for different wind directions are used in the present anal...

  16. Power Curve Measurements

    DEFF Research Database (Denmark)

    Villanueva, Héctor; Gómez Arranz, Paula

    The report describes power curve measurements carried out on a given wind turbine. The measurements are carried out in accordance to Ref. [1]. A site calibration has been carried out; see Ref. [2], and the measured flow correction factors for different wind directions are used in the present...

  17. Power Curve Measurements FGW

    DEFF Research Database (Denmark)

    Gómez Arranz, Paula; Villanueva, Héctor

    The report describes power curve measurements carried out on a given wind turbine. The measurements are carried out in accordance to Ref. [1]. A site calibration has been carried out; see Ref. [2], and the measured flow correction factors for different wind directions are used in the present...

  18. Power Curve Measurements

    DEFF Research Database (Denmark)

    Gómez Arranz, Paula; Vesth, Allan

    The report describes power curve measurements carried out on a given wind turbine. The measurements are carried out in accordance to Ref. [1]. A site calibration has been carried out; see Ref. [2], and the measured flow correction factors for different wind directions are used in the present...

  19. Power Curve Measurements, FGW

    DEFF Research Database (Denmark)

    Vesth, Allan; Yordanova, Ginka

    The report describes power curve measurements carried out on a given wind turbine. The measurements are carried out in accordance to Ref. [1]. A site calibration has been carried out; see Ref. [2], and the measured flow correction factors for different wind directions are used in the present...

  20. Power Curve Measurements, REWS

    DEFF Research Database (Denmark)

    Villanueva, Héctor; Gómez Arranz, Paula

    This report describes the power curve measurements carried out on a given wind turbine in a chosen period. The measurements were carried out following the measurement procedure in the draft of IEC 61400-12-1 Ed.2 [1], with some deviations mostly regarding uncertainty calculation. Here, the refere...

  1. Power Curve Measurements

    DEFF Research Database (Denmark)

    Federici, Paolo; Kock, Carsten Weber

    This report describes the power curve measurements performed with a nacelle LIDAR on a given wind turbine in a wind farm and during a chosen measurement period. The measurements and analysis are carried out in accordance to the guidelines in the procedure “DTU Wind Energy-E-0019” [1]. The reporting...

  2. The Measurement of Meaning.

    Science.gov (United States)

    Osgood, Charles E.; And Others

    The problem of measuring meaning viewed strictly as a psychological conception via the application of semantic differential theory is presented in this study. The first half of the book discusses theoretical background, logic of semantic measurement, basic factor analysis research, and a critical scientific evaluation of measuring procedures. The…

  3. Power Curve Measurements

    DEFF Research Database (Denmark)

    Kock, Carsten Weber; Federici, Paolo

    The report describes power curve measurements carried out on a given wind turbine. The measurements are carried out in accordance to Ref. [1]. A site calibration has been carried out; see Ref. [2], and the measured flow correction factors for different wind directions are used in the present...... analyze of power performance of the turbine....

  4. Power Curve Measurements, FGW

    DEFF Research Database (Denmark)

    Kock, Carsten Weber; Vesth, Allan

    The report describes power curve measurements carried out on a given wind turbine. The measurements are carried out in accordance to Ref. [1]. A site calibration has been carried out; see Ref. [2], and the measured flow correction factors for different wind directions are used in the present...... analyze of power performance of the turbine....

  5. Measure Free Martingales and Martingale Measures

    Indian Academy of Sciences (India)

    M G Nadkarni; B Rajeev

    2009-11-01

    Let $T\\subset\\mathbb{R}$ be a countable set, not necessarily discrete. Let $f_t,t\\in T$, be a family of real-valued functions defined on a set . We discuss conditions which imply that there is a probability measure on under which the family $f_t,t\\in T$, is a martingale.

  6. Measurement of ambiguity tolerance.

    Science.gov (United States)

    Norton, R W

    1975-12-01

    Presented definitions for the construct of ambiguity tolerance. The measure of ambiguity tolerance (MAT-50) had high internal reliability (r = .88) and high test-retest reliability (r = .86) over a 10-to-12 week period. A content analysis of the measure and a subjective analysis by 20 graduate students indicated adequate content validity. A multivariate comparison with two other ambiguity measures, two rigidity measures, and a short dogmatism measure provided strong evidence for criteria-related validity. Finally, four independent empirical studies showed good construct validity.

  7. Current measurement apparatus

    Science.gov (United States)

    Umans, Stephen D.

    2008-11-11

    Apparatus and methods are provided for a system for measurement of a current in a conductor such that the conductor current may be momentarily directed to a current measurement element in order to maintain proper current without significantly increasing an amount of power dissipation attributable to the current measurement element or adding resistance to assist in current measurement. The apparatus and methods described herein are useful in superconducting circuits where it is necessary to monitor current carried by the superconducting elements while minimizing the effects of power dissipation attributable to the current measurement element.

  8. Stability of boundary measures

    CERN Document Server

    Chazal, Frédéric; Mérigot, Quentin

    2007-01-01

    We introduce the boundary measure at scale r of a compact subset of the n-dimensional Euclidean space. We show how it can be computed for point clouds and suggest these measures can be used for feature detection. The main contribution of this work is the proof a quantitative stability theorem for boundary measures using tools of convex analysis and geometric measure theory. As a corollary we obtain a stability result for Federer's curvature measures of a compact, allowing to compute them from point-cloud approximations of the compact.

  9. Consistent quantum measurements

    Science.gov (United States)

    Griffiths, Robert B.

    2015-11-01

    In response to recent criticisms by Okon and Sudarsky, various aspects of the consistent histories (CH) resolution of the quantum measurement problem(s) are discussed using a simple Stern-Gerlach device, and compared with the alternative approaches to the measurement problem provided by spontaneous localization (GRW), Bohmian mechanics, many worlds, and standard (textbook) quantum mechanics. Among these CH is unique in solving the second measurement problem: inferring from the measurement outcome a property of the measured system at a time before the measurement took place, as is done routinely by experimental physicists. The main respect in which CH differs from other quantum interpretations is in allowing multiple stochastic descriptions of a given measurement situation, from which one (or more) can be selected on the basis of its utility. This requires abandoning a principle (termed unicity), central to classical physics, that at any instant of time there is only a single correct description of the world.

  10. Traceability and Measurement Uncertainty

    DEFF Research Database (Denmark)

    Tosello, Guido; De Chiffre, Leonardo

    2004-01-01

    respects necessary scientific precision and problem-solving approach of the field of engineering studies. Competences should be presented in a way that is methodologically and didactically optimised for employees with a mostly work-based vocational qualification and should at the same time be appealing...... and motivating to this important group. The developed e-learning system consists on 12 different chapters dealing with the following topics: 1. Basics 2. Traceability and measurement uncertainty 3. Coordinate metrology 4. Form measurement 5. Surface testing 6. Optical measurement and testing 7. Measuring rooms 8....... Machine tool testing 9. The role of manufacturing metrology for QM 10. Inspection planning 11. Quality management of measurements incl. Documentation 12. Advanced manufacturing measurement technology The present report (which represents the section 2 - Traceability and Measurement Uncertainty – of the e...

  11. Measuring social value orientation

    Directory of Open Access Journals (Sweden)

    Ryan O. Murphy

    2011-12-01

    Full Text Available Narrow self-interest is often used as a simplifying assumption when studying people making decisions in social contexts. Nonetheless, people exhibit a wide range of different motivations when choosing unilaterally among interdependent outcomes. Measuring the magnitude of the concern people have for others, sometimes called Social Value Orientation (SVO, has been an interest of many social scientists for decades and several different measurement methods have been developed so far. Here we introduce a new measure of SVO that has several advantages over existent methods. A detailed description of the new measurement method is presented, along with norming data that provide evidence of its solid psychometric properties. We conclude with a brief discussion of the research streams that would benefit from a more sensitive and higher resolution measure of SVO, and extend an invitation to others to use this new measure which is freely available.

  12. Comparing Measures of Sparsity

    CERN Document Server

    Hurley, Niall P

    2008-01-01

    Sparsity of representations of signals has been shown to be a key concept of fundamental importance in fields such as blind source separation, compression, sampling and signal analysis. The aim of this paper is to compare several commonlyused sparsity measures based on intuitive attributes. Intuitively, a sparse representation is one in which a small number of coefficients contain a large proportion of the energy. In this paper six properties are discussed: (Robin Hood, Scaling, Rising Tide, Cloning, Bill Gates and Babies), each of which a sparsity measure should have. The main contributions of this paper are the proofs and the associated summary table which classify commonly-used sparsity measures based on whether or not they satisfy these six propositions and the corresponding proofs. Only one of these measures satisfies all six: The Gini Index. measures based on whether or not they satisfy these six propositions and the corresponding proofs. Only one of these measures satisfies all six: The Gini Index.

  13. Locke on measurement.

    Science.gov (United States)

    Anstey, Peter R

    2016-12-01

    Like many virtuosi in his day, the English philosopher John Locke maintained an active interest in metrology. Yet for Locke, this was no mere hobby: questions concerning measurement were also implicated in his ongoing philosophical project to develop an account of human understanding. This paper follows Locke's treatment of four problems of measurement from the early Drafts A and B of the Essay concerning Human Understanding to the publication of this famous book and its aftermath. It traces Locke's attempt to develop a natural or universal standard for the measure of length, his attempts to grapple with the measurement of duration, as well as the problems of determining comparative measures for secondary qualities, and the problem of discriminating small differences in the conventional measures of his day. It is argued that the salient context for Locke's treatment of these problems is the new experimental philosophy and its method of experimental natural history.

  14. Optimized measurement of gaps

    Science.gov (United States)

    Harding, Kevin; Ramamurthy, Rajesh

    2017-05-01

    Gaps are important in a wide range of measurements in manufacturing, from the fitting of critical assemblies too cosmetic features on cars. There are a variety of potential sensors that can measure a gap opening, each with aspects of gap measurements that they do well and other aspects where the technology may lack capability. This paper provides a review of a wide range of optical gages from structured light to passive systems and from line to area measurement. Each technology is considered relative to the ability to accurately measure a gap, including issues of edge effects, edge shape, surface finish, and transparency. Finally, an approach will be presented for creating an optimize measurement off gap openings for critical assembly applications.

  15. Regularities of Multifractal Measures

    Indian Academy of Sciences (India)

    Hun Ki Baek

    2008-05-01

    First, we prove the decomposition theorem for the regularities of multifractal Hausdorff measure and packing measure in $\\mathbb{R}^d$. This decomposition theorem enables us to split a set into regular and irregular parts, so that we can analyze each separately, and recombine them without affecting density properties. Next, we give some properties related to multifractal Hausdorff and packing densities. Finally, we extend the density theorem in [6] to any measurable set.

  16. Relativistic Quantum Noninvasive Measurements

    CERN Document Server

    Bednorz, Adam

    2014-01-01

    Quantum weak, noninvasive measurements are defined in the framework of relativity. Invariance with respect to reference frame transformations of the results in different models is discussed. Surprisingly, the bare results of noninvasive measurements are invariant for certain class of models, but not the detection error. Consequently, any stationary quantum realism based on noninvasive measurements will break, at least spontaneously, relativistic invariance and correspondence principle at zero temperature.

  17. Semiconductor Laser Measurements Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The Semiconductor Laser Measurements Laboratory is equipped to investigate and characterize the lasing properties of semiconductor diode lasers. Lasing features such...

  18. Aperture area measurement facility

    Data.gov (United States)

    Federal Laboratory Consortium — NIST has established an absolute aperture area measurement facility for circular and near-circular apertures use in radiometric instruments. The facility consists of...

  19. Precision Electroweak Measurements

    CERN Document Server

    Przysiezniak, H

    2000-01-01

    This talk describes some of the precision electroweak measurements from around the world, namely those related to the Z and W bosons, the top quark mass, sin2 theta_ W at NuTeV, and three other fundamental measurements: alpha-1 m2_ Z, (g-2)_mu at the E821 BNL experiment as well as the atomic parity violation (APV) measurement for the Cesium atom. These and other measurements are set in the context of the Standard Model (SM) and of the electroweak fit predictions. Future prospects for forthcoming experiments are briefly discussed.

  20. Gamma measurements at LHCb

    CERN Document Server

    Cheung, Faye

    2016-01-01

    Recent measurements of the CKM angle g from charged and neutral B$\\rightarrow$ DK(*) decays, with a variety of D final states, are presented. The measurements are performed using proton-proton collision data corresponding to an integrated luminosity of 3 fb$^{-1}$ collected at the LHCb experiment during Run I of the LHC. The results of a combination of LHCb g measurements are discussed. The combined value of $\\gamma$ is $(70.9^{+7.1}_{-8.5})^{\\circ}$ and is the most precise measurement of $\\gamma$ from a single experiment.

  1. Coherent states measurement entropy

    CERN Document Server

    Kwapien, J; Zyczkowski, K; Kwapien, Jaroslaw; Slomczynski, Wojciech; Zyczkowski, Karol

    1996-01-01

    Coherent states (CS) quantum entropy can be split into two components. The dynamical entropy is linked with the dynamical properties of a quantum system. The measurement entropy, which tends to zero in the semiclassical limit, describes the unpredictability induced by the process of a quantum approximate measurement. We study the CS--measurement entropy for spin coherent states defined on the sphere discussing different methods dealing with the time limit n \\to \\infty. In particular we propose an effective technique of computing the entropy by iterated function systems. The dependence of CS--measurement entropy on the character of the partition of the phase space is analysed.

  2. Measuring Physical Activity Intensity

    Medline Plus

    Full Text Available ... Adults Overcoming Barriers Measuring Physical Activity Intensity Target Heart Rate & Estimated Maximum Heart Rate Perceived Exertion (Borg Rating of Perceived Exertion Scale) ...

  3. Photothermal measurements of superconductors

    Energy Technology Data Exchange (ETDEWEB)

    Kino, G.S.; Studenmund, W.R.; Fishman, I.M. [Stanford Univ., Stanford, CA (United States)

    1996-12-31

    A photothermal technique has been used to measure diffusion and critical temperature in high temperature superconductors. The technique is particularly suitable for determining material quality and inhomogeneity.

  4. Systemic risk measures

    Science.gov (United States)

    Guerra, Solange Maria; Silva, Thiago Christiano; Tabak, Benjamin Miranda; de Souza Penaloza, Rodrigo Andrés; de Castro Miranda, Rodrigo César

    2016-01-01

    In this paper we present systemic risk measures based on contingent claims approach and banking sector multivariate density. We also apply network measures to analyze bank common risk exposure. The proposed measures aim to capture credit risk stress and its potential to become systemic. These indicators capture not only individual bank vulnerability, but also the stress dependency structure between them. Furthermore, these measures can be quite useful for identifying systemically important banks. The empirical results show that these indicators capture with considerable fidelity the moments of increasing systemic risk in the Brazilian banking sector in recent years.

  5. Atmospheric Measurements Laboratory (AML)

    Data.gov (United States)

    Federal Laboratory Consortium — The Atmospheric Measurements Laboratory (AML) is one of the nation's leading research facilities for understanding aerosols, clouds, and their interactions. The AML...

  6. Measuring Mobile Phone Use

    DEFF Research Database (Denmark)

    Boase, Jeff; Ling, Richard

    2013-01-01

    In this paper we examine how well two types of self-report measures adequately operationalize frequency of mobile phone use by comparing them to server log data. Our self-report measures of voice and SMS text messaging activity are drawn from a nationally representative survey of adults living in...

  7. Dynamics via measurability

    Directory of Open Access Journals (Sweden)

    2006-01-01

    Full Text Available Generators f for σ -algebras can be used to view the dynamics of an invertible measurable transformation T in terms of the range values of f ∘ T . Such generators are the norm rather than the exception. Related measurable and quantitative methods of estimating a function from the behavior of ergodic averages are also discussed.

  8. Higgs Measurement from ATLAS

    CERN Document Server

    Liu, Bo; The ATLAS collaboration

    2015-01-01

    Using run-I data record by ATLAS detector, many searches on the higgs decay modes have been done. Also some properties measurement of the Higgs Boson has been done. This talk will summarise the recent result of Higgs search and measurement from ATLAS.

  9. Three measures of longevity

    DEFF Research Database (Denmark)

    Canudas-Romo, Vladimir

    2010-01-01

    This article examines the trend over time in the measures of "typical" longevity experienced by members of a population: life expectancy at birth, and the median and modal ages at death. The article also analyzes trends in record values observed for all three measures. The record life expectancy ...

  10. Measures of Biochemical Sociology

    Science.gov (United States)

    Snell, Joel; Marsh, Mitchell

    2008-01-01

    In a previous article, the authors introduced a new sub field in sociology that we labeled "biochemical sociology." We introduced the definition of a sociology that encompasses sociological measures, psychological measures, and biological indicators Snell & Marsh (2003). In this article, we want to demonstrate a research strategy that would assess…

  11. Measures of Pleasures

    NARCIS (Netherlands)

    S.J. Magala (Slawomir)

    2002-01-01

    textabstractMeasuring culture originated in cultural anthropology, but all social sciences contributed to comparative cultural studies. Tracing critical approaches towards a measurement of cultural values one is bound to strip the biases and stereotypes bare and to invade numerous academic fiefs. Ho

  12. Measuring News Media Literacy

    Science.gov (United States)

    Maksl, Adam; Ashley, Seth; Craft, Stephanie

    2015-01-01

    News media literacy refers to the knowledge and motivations needed to identify and engage with journalism. This study measured levels of news media literacy among 500 teenagers using a new scale measure based on Potter's model of media literacy and adapted to news media specifically. The adapted model posits that news media literate individuals…

  13. Measuring innovative work behaviour

    NARCIS (Netherlands)

    de Jong, J.; den Hartog, D.

    2010-01-01

    Both scientists and practitioners emphasize the importance of innovative work behaviour (IWB) of individual employees for organizational success, but the measurement of IWB is still at an evolutionary stage. This article is concerned with developed a measure of IWB with four potential dimensions: th

  14. Isothermal and Adiabatic Measurements.

    Science.gov (United States)

    McNairy, William W.

    1996-01-01

    Describes the working of the Adiabatic Gas Law Apparatus, a useful tool for measuring the pressure, temperature, and volume of a variety of gases undergoing compressions and expansions. Describes the adaptation of this apparatus to perform isothermal measurements and discusses the theory behind the adiabatic and isothermal processes. (JRH)

  15. Modeling typical performance measures

    NARCIS (Netherlands)

    Weekers, Anke Martine

    2009-01-01

    In the educational, employment, and clinical context, attitude and personality inventories are used to measure typical performance traits. Statistical models are applied to obtain latent trait estimates. Often the same statistical models as the models used in maximum performance measurement are appl

  16. Measuring Relational Reasoning

    Science.gov (United States)

    Alexander, Patricia A.; Dumas, Denis; Grossnickle, Emily M.; List, Alexandra; Firetto, Carla M.

    2016-01-01

    Relational reasoning is the foundational cognitive ability to discern meaningful patterns within an informational stream, but its reliable and valid measurement remains problematic. In this investigation, the measurement of relational reasoning unfolded in three stages. Stage 1 entailed the establishment of a research-based conceptualization of…

  17. Measuring Social Capital

    DEFF Research Database (Denmark)

    Svendsen, Gert Tinggaard; Bjørnskov, Christian

    2007-01-01

    How to construct a robust measure of social capital? This paper contains two contributions. The first is an attempt to establish a broad social capital measure based on four indicators, the Freedom House Index, an index of perceived corruption from Transparency International, and scores on civic...

  18. Faraday rotation measure synthesis

    NARCIS (Netherlands)

    Brentjens, MA; de Bruyn, AG

    2005-01-01

    We extend the rotation measure work of Burn ( 1966, MNRAS, 133, 67) to the cases of limited sampling of lambda(2) space and non-constant emission spectra. We introduce the rotation measure transfer function (RMTF), which is an excellent predictor of n pi ambiguity problems with the lambda(2) coverag

  19. Global Precipitation Measurement Poster

    Science.gov (United States)

    Azarbarzin, Art

    2010-01-01

    This poster presents an overview of the Global Precipitation Measurement (GPM) constellation of satellites which are designed to measure the Earth's precipitation. It includes the schedule of launches for the various satellites in the constellation, and the coverage of the constellation, It also reviews the mission capabilities, and the mission science objectives.

  20. Hand measuring eqipment

    DEFF Research Database (Denmark)

    De Chiffre, Leonardo

    This note is used in connection with a 3 x 2 hours laboratory exercise as a part of the course GEOMETRICAL METROLOGY AND MACHINE TESTING. The laboratory includes a demonstration of a series of hand measuring tools as well as a number of exercises, illustrating the use of hand measuring equipment...

  1. Mechanical Measurements Laboratory

    CERN Multimedia

    Maximilien Brice

    2007-01-01

    The CERN mechanical measurements team check the sensors on one of the ATLAS inner detector end-caps using high precision measurement equipment. Remote checks like this must be made on these sensitive detector components before they can be transported to make sure that all systems are working correctly.

  2. Measuring innovative work behaviour

    NARCIS (Netherlands)

    de Jong, J.; den Hartog, D.

    2010-01-01

    Both scientists and practitioners emphasize the importance of innovative work behaviour (IWB) of individual employees for organizational success, but the measurement of IWB is still at an evolutionary stage. This article is concerned with developed a measure of IWB with four potential dimensions:

  3. Measurement of surface roughness

    DEFF Research Database (Denmark)

    De Chiffre, Leonardo

    This document is used in connection with two 3 hours laboratory exercises that are part of the course GEOMETRICAL METROLOGY AND MACHINE TESTING. The laboratories include a demonstration of the function of roughness measuring instruments plus a series of exercises illustrating roughness measurement...

  4. Measuring internet skills

    NARCIS (Netherlands)

    Deursen, van A.J.A.M.; Dijk, van J.A.G.M.

    2010-01-01

    Research that considers Internet skills often lacks theoretical justifications and does not go beyond basic button knowledge. There is a strong need for a measurement framework that can guide future research. In this article, operational definitions for measuring Internet skills are proposed, applie

  5. Measuring Facial Movement

    Science.gov (United States)

    Ekman, Paul; Friesen, Wallace V.

    1976-01-01

    The Facial Action Code (FAC) was derived from an analysis of the anatomical basis of facial movement. The development of the method is explained, contrasting it to other methods of measuring facial behavior. An example of how facial behavior is measured is provided, and ideas about research applications are discussed. (Author)

  6. Measures of Biochemical Sociology

    Science.gov (United States)

    Snell, Joel; Marsh, Mitchell

    2008-01-01

    In a previous article, the authors introduced a new sub field in sociology that we labeled "biochemical sociology." We introduced the definition of a sociology that encompasses sociological measures, psychological measures, and biological indicators Snell & Marsh (2003). In this article, we want to demonstrate a research strategy that would assess…

  7. Metrology Measurement Capabilities

    Energy Technology Data Exchange (ETDEWEB)

    Dr. Glen E. Gronniger

    2007-10-02

    This document contains descriptions of Federal Manufacturing & Technologies (FM&T) Metrology capabilities, traceability flow charts, and the measurement uncertainty of each measurement capability. Metrology provides NIST traceable precision measurements or equipment calibration for a wide variety of parameters, ranges, and state-of-the-art uncertainties. Metrology laboratories conform to the requirements of the Department of Energy Development and Production Manual Chapter 13.2, ANSI/ISO/IEC ANSI/ISO/IEC 17025:2005, and ANSI/NCSL Z540-1. FM&T Metrology laboratories are accredited by NVLAP for the parameters, ranges, and uncertainties listed in the specific scope of accreditation under NVLAP Lab code 200108-0. See the Internet at http://ts.nist.gov/Standards/scopes/2001080.pdf. These parameters are summarized. The Honeywell Federal Manufacturing & Technologies (FM&T) Metrology Department has developed measurement technology and calibration capability in four major fields of measurement: (1) Mechanical; (2) Environmental, Gas, Liquid; (3) Electrical (DC, AC, RF/Microwave); and (4) Optical and Radiation. Metrology Engineering provides the expertise to develop measurement capabilities for virtually any type of measurement in the fields listed above. A strong audit function has been developed to provide a means to evaluate the calibration programs of our suppliers and internal calibration organizations. Evaluation includes measurement audits and technical surveys.

  8. Measuring Poverty: A Rejoinder

    Science.gov (United States)

    Iceland, John

    2005-01-01

    This article presents the author's rejoinder on commentaries of his article which illustrate the variety of perspectives with which people approach poverty measurement issues. Some of the comments highlight the theoretical concerns underpinning poverty measurement efforts, whereas others focus on empirical considerations. As a social scientist,…

  9. Measure Free Martingales

    Indian Academy of Sciences (India)

    Rajeeva L Karandikar; M G Nadkarni

    2005-02-01

    We give a necessary and sufficient condition on a sequence of functions on a set under which there is a measure on which renders the given sequence of functions a martingale. Further such a measure is unique if we impose a natural maximum entropy condition on the conditional probabilities.

  10. Electron measurement in PHENIX

    Energy Technology Data Exchange (ETDEWEB)

    Akiba, Y. [Univ. of Tokyo, Tanashi (Japan)

    1995-07-15

    Electron Measurement in PHENIX detector at RHIC is discussed. The yield and S/N ratio at vector meson peaks ({phi}, {omega}, {rho}{sup o}, and J/{psi}) are evaluated. The electrons from open charm decay, and its consequence to the di-electron measurements is discussed.

  11. Refractive index based measurements

    DEFF Research Database (Denmark)

    2014-01-01

    A refractive index based measurement of a property of a fluid is measured in an apparatus comprising a variable wavelength coherent light source (16), a sample chamber (12), a wavelength controller (24), a light sensor (20), a data recorder (26) and a computation apparatus (28), by - directing...

  12. Refractive index based measurements

    DEFF Research Database (Denmark)

    2014-01-01

    In a method for performing a refractive index based measurement of a property of a fluid such as chemical composition or temperature by observing an apparent angular shift in an interference fringe pattern produced by back or forward scattering interferometry, ambiguities in the measurement caused...

  13. Bullen Reading Attitude Measure.

    Science.gov (United States)

    Bullen, Gertrude F.

    The Bullen Reading Attitude Measure (BRAM) is an instrument that was developed to serve as a diagnostic aid in assessing reading attitudes of elementary school children in grades one through six. The objectives of the test are to measure the subject's attitude toward reading at home or school, visiting the library, owning and buying books,…

  14. Aerial measurements in Finland

    Energy Technology Data Exchange (ETDEWEB)

    Winkelmann, I.; Thomas, M.; Buchroeder, H.; Brummer, C. [Federal Office for Radiation Protection, Berlin (Germany); Carloff, G. [German Federal Border Police, Grenzschutz-Fliegergruppe, Sankt Augustin (Germany)

    1997-12-31

    Aerial measurements were performed to determine the {sup 137}Cs soil contamination in a given region to detect unknown radiation sources and to assess their activity. For these measurements a computerized gamma ray spectrometer, equipped with a high purity Ge-semiconductor detector and a 12 l volume Nal(Tl)-detector was used. HPGe-detector measurements from different altitudes over area I were done to test and re-calibrate the aerial measuring system. The known {sup 137}Cs contamination of (50.7 {+-} 5.2) kBq m{sup -2} could be confirmed by the measured value of (57 {+-} 10) kBq m{sup -2}. the Nal(Tl)-detector was re-calibrated at that site for further {sup 137}Cs measurements over area II. The area II was surveyed from an altitude of about 70 m and at a parallel line distance of 150 m at an flying speed of 100 km h{sup -1} to determine the {sup 137}Cs soil contamination. The measuring time was two seconds for the Nal(Tl)-detector. For the spectra measured with the HPGe-detector, a measuring time of 30 s each was chosen. From the Nal(Tl)-measurements, a mean {sup 137}Cs value of (60 {+-} 20) kBq m{sup -2} was determined with a maximum value of 90 kBq m{sup -2}. The corresponding values measured by HPGe-detector were (70 {+-} 20) kBq m{sup -2} and 120 kBq m{sup -2}, respectively. For the evaluation of the HPGe-spectra a depth distribution parameter {alpha}/{rho} = (0.44 {+-} 0.21) cm{sup 2} g{sup -1} for {sup 137}Cs was used measured from soil samples. From data measured with the Nal(Tl)-detector during flights over area III, three{sup 60}Co-sources and one {sup 137}Cs source could be detected, localized and their activity assessed. By HPGe-detector measurements, only scattered {sup 192}lr radiation was registered. (au).

  15. W mass measurement

    CERN Document Server

    Andari, Nansi; The ATLAS collaboration

    2017-01-01

    A first measurement of the W-boson mass at the LHC is presented based on about 4.6 fb^-1 of proton–proton collision data recorded in 2011 at a centre-of-mass energy of 7 TeV with the ATLAS detector. The measured value is 80370±19 MeV, consistent with the Standard Model prediction, with the combined values measured at the LEP and Tevatron colliders, and with the world average. The ATLAS result equals in precision the previous best measurement of the W mass, performed by the CDF collaboration. The CMS results for the W-like measurement of the Z boson mass using dimuon events are also shown. An overview of the analyses is shown with a special emphasis on the evaluation of the experimental systematic uncertainties, as well as on the uncertainties due to the modelling of the vector boson production and decay.

  16. Measuring static complexity

    Directory of Open Access Journals (Sweden)

    Ben Goertzel

    1992-01-01

    Full Text Available The concept of “pattern” is introduced, formally defined, and used to analyze various measures of the complexity of finite binary sequences and other objects. The standard Kolmogoroff-Chaitin-Solomonoff complexity measure is considered, along with Bennett's ‘logical depth’, Koppel's ‘sophistication'’, and Chaitin's analysis of the complexity of geometric objects. The pattern-theoretic point of view illuminates the shortcomings of these measures and leads to specific improvements, it gives rise to two novel mathematical concepts--“orders” of complexity and “levels” of pattern, and it yields a new measure of complexity, the “structural complexity”, which measures the total amount of structure an entity possesses.

  17. Undoing a quantum measurement.

    Science.gov (United States)

    Schindler, Philipp; Monz, Thomas; Nigg, Daniel; Barreiro, Julio T; Martinez, Esteban A; Brandl, Matthias F; Chwalla, Michael; Hennrich, Markus; Blatt, Rainer

    2013-02-15

    In general, a quantum measurement yields an undetermined answer and alters the system to be consistent with the measurement result. This process maps multiple initial states into a single state and thus cannot be reversed. This has important implications in quantum information processing, where errors can be interpreted as measurements. Therefore, it seems that it is impossible to correct errors in a quantum information processor, but protocols exist that are capable of eliminating them if they affect only part of the system. In this work we present the deterministic reversal of a fully projective measurement on a single particle, enabled by a quantum error-correction protocol in a trapped ion quantum information processor. We further introduce an in-sequence, single-species recooling procedure to counteract the motional heating of the ion string due to the measurement.

  18. Measurement of academic entitlement.

    Science.gov (United States)

    Miller, Brian K

    2013-10-01

    Members of Generation Y, or Millennials, have been accused of being lazy, whiny, pampered, and entitled, particularly in the college classroom. Using an equity theory framework, eight items from a measure of work entitlement were adapted to measure academic entitlement in a university setting in three independent samples. In Study 1 (n = 229), confirmatory factor analyses indicated good model fit to a unidimensional structure for the data. In Study 2 (n = 200), the questionnaire predicted unique variance in university satisfaction beyond two more general measures of dispositional entitlement. In Study 3 (n = 161), the measure predicted unique variance in perceptions of grade fairness beyond that which was predicted by another measure of academic entitlement. This analysis provides evidence of discriminant, convergent, incremental, concurrent criterion-related, and construct validity for the Academic Equity Preference Questionnaire.

  19. Stability of Curvature Measures

    CERN Document Server

    Chazal, Frédéric; Lieutier, André; Thibert, Boris

    2008-01-01

    We address the problem of curvature estimation from sampled compact sets. The main contribution is a stability result: we show that the gaussian, mean or anisotropic curvature measures of the offset of a compact set K with positive $\\mu$-reach can be estimated by the same curvature measures of the offset of a compact set K' close to K in the Hausdorff sense. We show how these curvature measures can be computed for finite unions of balls. The curvature measures of the offset of a compact set with positive $\\mu$-reach can thus be approximated by the curvature measures of the offset of a point-cloud sample. These results can also be interpreted as a framework for an effective and robust notion of curvature.

  20. Measurement uncertainty and probability

    CERN Document Server

    Willink, Robin

    2013-01-01

    A measurement result is incomplete without a statement of its 'uncertainty' or 'margin of error'. But what does this statement actually tell us? By examining the practical meaning of probability, this book discusses what is meant by a '95 percent interval of measurement uncertainty', and how such an interval can be calculated. The book argues that the concept of an unknown 'target value' is essential if probability is to be used as a tool for evaluating measurement uncertainty. It uses statistical concepts, such as a conditional confidence interval, to present 'extended' classical methods for evaluating measurement uncertainty. The use of the Monte Carlo principle for the simulation of experiments is described. Useful for researchers and graduate students, the book also discusses other philosophies relating to the evaluation of measurement uncertainty. It employs clear notation and language to avoid the confusion that exists in this controversial field of science.

  1. POTASSIUM MEASUREMENT: CAUSES OF ERRORS IN MEASUREMENT

    Directory of Open Access Journals (Sweden)

    Kavitha

    2014-07-01

    Full Text Available It is not a easy task to recognize the errors in potassium measurement in the lab. Falsely elevated potassium levels if goes unrecognized by the lab and clinician, it is difficult to treat masked hypokalemic state, which is again a medical emergency. Such cases require proper monitoring by the clinician, so that cases with such history of pseudohyperkalemia which cannot be easily identified in the laboratory should not go unrecognized by clinician. The aim of this article is to discuss the causes and mechanisms of spuriously elevated potassium and minimize the factors causing pseudohyperkalemia. Literature search performed on pubmed using terms “pseudohyperkalemia”, “spurious hyperkalemia”, “and masked hyperkalemia”, “reverse pseudohyperkalemia”, “factitious hyperkalemia”.

  2. ORDERED WEIGHTED DISTANCE MEASURE

    Institute of Scientific and Technical Information of China (English)

    Zeshui XU; Jian CHEN

    2008-01-01

    The aim of this paper is to develop an ordered weighted distance (OWD) measure, which is thegeneralization of some widely used distance measures, including the normalized Hamming distance, the normalized Euclidean distance, the normalized geometric distance, the max distance, the median distance and the min distance, etc. Moreover, the ordered weighted averaging operator, the generalized ordered weighted aggregation operator, the ordered weighted geometric operator, the averaging operator, the geometric mean operator, the ordered weighted square root operator, the square root operator, the max operator, the median operator and the min operator axe also the special cases of the OWD measure. Some methods depending on the input arguments are given to determine the weights associated with the OWD measure. The prominent characteristic of the OWD measure is that it can relieve (or intensify) the influence of unduly large or unduly small deviations on the aggregation results by assigning them low (or high) weights. This desirable characteristic makes the OWD measure very suitable to be used in many actual fields, including group decision making, medical diagnosis, data mining, and pattern recognition, etc. Finally, based on the OWD measure, we develop a group decision making approach, and illustrate it with a numerical example.

  3. Cardiac output measurement

    Directory of Open Access Journals (Sweden)

    Andreja Möller Petrun

    2014-02-01

    Full Text Available In recent years, developments in the measuring of cardiac output and other haemodynamic variables are focused on the so-called minimally invasive methods. The aim of these methods is to simplify the management of high-risk and haemodynamically unstable patients. Due to the need of invasive approach and the possibility of serious complications the use of pulmonary artery catheter has decreased. This article describes the methods for measuring cardiac output, which are based on volume measurement (Fick method, indicator dilution method, pulse wave analysis, Doppler effect, and electrical bioimpedance.

  4. Measuring autocratic regime stability

    Directory of Open Access Journals (Sweden)

    Joseph Wright

    2016-01-01

    Full Text Available Researchers measure regime stability in autocratic contexts using a variety of data sources that capture distinct concepts. Often this research uses concepts developed for the study of democratic politics, such as leadership change or institutionalized authority, to construct measures of regime breakdown in non-democratic contexts. This article assesses whether the measure a researcher chooses influences the results they obtain by examining data on executive leadership, political authority, and autocratic regimes. We illustrate the conceptual differences between these variables by extending recent studies in the literature on the political consequences of non-tax revenue and unearned foreign income.

  5. Measurement of weak radioactivity

    CERN Document Server

    Theodorsson , P

    1996-01-01

    This book is intended for scientists engaged in the measurement of weak alpha, beta, and gamma active samples; in health physics, environmental control, nuclear geophysics, tracer work, radiocarbon dating etc. It describes the underlying principles of radiation measurement and the detectors used. It also covers the sources of background, analyzes their effect on the detector and discusses economic ways to reduce the background. The most important types of low-level counting systems and the measurement of some of the more important radioisotopes are described here. In cases where more than one type can be used, the selection of the most suitable system is shown.

  6. Measuring European selves

    DEFF Research Database (Denmark)

    Antalikova, Radka

    -Communist Europe and Scandinavia. The study’s results exemplify participants’ interdependence, whether in the form of their relational and group self-descriptions or their autobiographical memories recalled to different interpersonal cue words. On the whole, the current thesis contributes with novel data...... the term interdependence. Thereafter, the thesis critically examines the most common measures of self and appropriates some of these measures for use in the current empirical study. More concretely, the current study compares self-descriptions and autobiographical memories of individuals from post...... to the field of cross-cultural psychology, specifically highlighting the utility of autobiographical memories as measures of self....

  7. Precision volume measurement system.

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, Erin E.; Shugard, Andrew D.

    2004-11-01

    A new precision volume measurement system based on a Kansas City Plant (KCP) design was built to support the volume measurement needs of the Gas Transfer Systems (GTS) department at Sandia National Labs (SNL) in California. An engineering study was undertaken to verify or refute KCP's claims of 0.5% accuracy. The study assesses the accuracy and precision of the system. The system uses the ideal gas law and precise pressure measurements (of low-pressure helium) in a temperature and computer controlled environment to ratio a known volume to an unknown volume.

  8. Measurement System Reliability Assessment

    Directory of Open Access Journals (Sweden)

    Kłos Ryszard

    2015-06-01

    Full Text Available Decision-making in problem situations is based on up-to-date and reliable information. A great deal of information is subject to rapid changes, hence it may be outdated or manipulated and enforce erroneous decisions. It is crucial to have the possibility to assess the obtained information. In order to ensure its reliability it is best to obtain it with an own measurement process. In such a case, conducting assessment of measurement system reliability seems to be crucial. The article describes general approach to assessing reliability of measurement systems.

  9. Resonance classes of measures

    Directory of Open Access Journals (Sweden)

    Maria Torres De Squire

    1987-01-01

    Full Text Available We extend F. Holland's definition of the space of resonant classes of functions, on the real line, to the space R(Φpq (1≦p, q≦∞ of resonant classes of measures, on locally compact abelian groups. We characterize this space in terms of transformable measures and establish a realatlonship between R(Φpq and the set of positive definite functions for amalgam spaces. As a consequence we answer the conjecture posed by L. Argabright and J. Gil de Lamadrid in their work on Fourier analysis of unbounded measures.

  10. Spectroelectrochemical Instrument Measures TOC

    Science.gov (United States)

    Kounaves, Sam

    2011-01-01

    A spectroelectrochemical instrument has been developed for measuring the total organic carbon (TOC) content of an aqueous solution. Measurements of TOC are frequently performed in environmental, clinical, and industrial settings. Until now, techniques for performing such measurements have included, various ly, the use of hazardous reagents, ultraviolet light, or ovens, to promote reactions in which the carbon contents are oxidized. The instrument now being developed is intended to be a safer, more economical means of oxidizing organic carbon and determining the TOC levels of aqueous solutions and for providing a low power/mass unit for use in planetary missions.

  11. Measuring Thermodynamic Length

    Energy Technology Data Exchange (ETDEWEB)

    Crooks, Gavin E

    2007-09-07

    Thermodynamic length is a metric distance between equilibrium thermodynamic states. Among other interesting properties, this metric asymptotically bounds the dissipation induced by a finite time transformation of a thermodynamic system. It is also connected to the Jensen-Shannon divergence, Fisher information, and Rao's entropy differential metric. Therefore, thermodynamic length is of central interestin understanding matter out of equilibrium. In this Letter, we will consider how to denethermodynamic length for a small system described by equilibrium statistical mechanics and how to measure thermodynamic length within a computer simulation. Surprisingly, Bennett's classic acceptance ratio method for measuring free energy differences also measures thermodynamic length.

  12. Investigations on freeform measurements

    DEFF Research Database (Denmark)

    Savio, Enrico; Costacurta, A.; De Chiffre, Leonardo

    This report is made as a part of the project Easytrac, an EU project under the programme: Competitive and Sustainable Growth: Contract No: G6RD-CT-2000-00188, coordinated by UNIMETRIK S.A. (Spain). The project is concerned with low uncertainty calibrations on coordinate measuring machines....... The Centre for Geometrical Metrology (CGM) at the Technical University of Denmark takes care of free form measurements, in collaboration with DIMEG, University of Padova, Italy. The present report describes some preliminary investigations on freeform measurements....

  13. LHCb PDF measurements

    CERN Document Server

    Vesterinen, Mika

    2016-01-01

    The LHCb experiment covers a unique region of acceptance at forward rapidities in the high energy proton-proton collisions of the LHC. This means that measurements of particle production in LHCb are directly sensitive to the parton distribution functions at low Bj\\"orken-$x$ values. Several measurements of inclusive $W$ and $Z/\\gamma^{\\ast}$ production with the Run-I dataset are reported in these proceedings. Further measurements of $W$ and $Z/\\gamma^{\\ast}$ production in association with inclusive jets and $b$- and $c$-tagged jets are also reported.

  14. Wireless Acoustic Measurement System

    Science.gov (United States)

    Anderson, Paul D.; Dorland, Wade D.; Jolly, Ronald L.

    2007-01-01

    A prototype wireless acoustic measurement system (WAMS) is one of two main subsystems of the Acoustic Prediction/ Measurement Tool, which comprises software, acoustic instrumentation, and electronic hardware combined to afford integrated capabilities for predicting and measuring noise emitted by rocket and jet engines. The other main subsystem is described in the article on page 8. The WAMS includes analog acoustic measurement instrumentation and analog and digital electronic circuitry combined with computer wireless local-area networking to enable (1) measurement of sound-pressure levels at multiple locations in the sound field of an engine under test and (2) recording and processing of the measurement data. At each field location, the measurements are taken by a portable unit, denoted a field station. There are ten field stations, each of which can take two channels of measurements. Each field station is equipped with two instrumentation microphones, a micro- ATX computer, a wireless network adapter, an environmental enclosure, a directional radio antenna, and a battery power supply. The environmental enclosure shields the computer from weather and from extreme acoustically induced vibrations. The power supply is based on a marine-service lead-acid storage battery that has enough capacity to support operation for as long as 10 hours. A desktop computer serves as a control server for the WAMS. The server is connected to a wireless router for communication with the field stations via a wireless local-area network that complies with wireless-network standard 802.11b of the Institute of Electrical and Electronics Engineers. The router and the wireless network adapters are controlled by use of Linux-compatible driver software. The server runs custom Linux software for synchronizing the recording of measurement data in the field stations. The software includes a module that provides an intuitive graphical user interface through which an operator at the control server

  15. Quantum search by measurement

    CERN Document Server

    Childs, A M; Farhi, E; Goldstone, J; Gutmann, S; Landahl, A J; Childs, Andrew M.; Deotto, Enrico; Farhi, Edward; Goldstone, Jeffrey; Gutmann, Sam; Landahl, Andrew J.

    2002-01-01

    We propose a quantum algorithm for solving combinatorial search problems that uses only a sequence of measurements. The algorithm is similar in spirit to quantum computation by adiabatic evolution, in that the goal is to remain in the ground state of a time-varying Hamiltonian. Indeed, we show that the running times of the two algorithms are closely related. We also show how to achieve the quadratic speedup for Grover's unstructured search problem with only two measurements. Finally, we discuss some similarities and differences between the adiabatic and measurement algorithms.

  16. Dielectron Measurements in STAR

    Directory of Open Access Journals (Sweden)

    Geurts Frank

    2012-11-01

    Full Text Available Ultrarelativistic heavy-ion collisions provide a unique environment to study the properties of strongly interacting matter. Dileptons, which are not affected by the strong interactions, are an ideal penetrating probe. We present the dielectron results for p+p and Au+Au collisions at √sNN = 200 GeV, as measured by the STAR experiment. We discuss the prospects of dilepton measurements with the near-future detector upgrades, and the recent lower beam energy Au+Au measurements.

  17. Dilepton measurements with CERES

    CERN Document Server

    Marin, A; Agakichiev, G; Andronic, A; Antonczyk, D; Appelshäuser, H; Bielcíkováe, V; Biel, J; Braun-Munzinger, P; Busch, O; Cherlin, A; Damjanovic, S; Dietel, T; Dietrich, L; Drees, A; Esumi, S I; Filimonov, K; Fomenko, K; Fraenkel, Zeev; Garabatos, C; Glässel, P; Hering, G; Holeczek, J; Kalisky, M; Kniege, S; Kushpil, V; Ludolphs, W; Maas, A; Milosevic, J; Miskowiec, D; Ortega, R; Panebratsev, Yu A; Petchenova, O; Petracek, V; Ploskon, M; Radomski, S; Rak, J; Ravinovich, I; Rehak, P; Sako, H; Schmitz, W; Schuchmann, S; Sedykh, S; Shimansky, S; Soualah, R; Stachel, J; Sumbera, M; Tilsner, H; Tserruya, Itzhak; Tsiledakis, G; Wessels, J P; Wienold, T; Wurm, J P; Yurevich, S; Yurevich, V

    2008-01-01

    We report on dilepton measurements for central Pb on Au collisions at the top CERN SPS energy with the upgraded CERES experiment. The dilepton mass spectrum of 2000 data with improved mass resolution shows an enhancement over the expectation from hadron decays that is well described by a model including a strong broadening of the $\\rho$ spectral function. The measured excess yield excludes the dropping mass scenario. We also report on the $\\phi$ meson measured simultaneously both in the $K^+K^-$ and in the dilepton decay channel for the first time in high energy heavy-ion collisions. An excellent agreement is found between the rapidity densities and the shape of the measured tranverse momentum spectrum. The data rule out a possible enhancement of the $\\phi$ yield in the leptonic over hadronic channel by a factor larger than 1.6 at 95% CL. CERES results are in agreement with NA49 results.

  18. Essentials of measure theory

    CERN Document Server

    Kubrusly, Carlos S

    2015-01-01

    Classical in its approach, this textbook is thoughtfully designed and composed in two parts. Part I is meant for a one-semester beginning graduate course in measure theory, proposing an “abstract” approach to measure and integration, where the classical concrete cases of Lebesgue measure and Lebesgue integral are presented as an important particular case of general theory. Part II of the text is more advanced and is addressed to a more experienced reader. The material is designed to cover another one-semester graduate course subsequent to a first course, dealing with measure and integration in topological spaces. The final section of each chapter in Part I presents problems that are integral to each chapter, the majority of which consist of auxiliary results, extensions of the theory, examples, and counterexamples. Problems which are highly theoretical have accompanying hints. The last section of each chapter of Part II consists of Additional Propositions containing auxiliary and complementary results. Th...

  19. Measuring perception without introspection

    NARCIS (Netherlands)

    Alais, D.; Keetels, M.N.; Freeman, A.

    2014-01-01

    Binocular rivalry, the perceptual alternation between incompatible monocular stimuli, is conventionally measured by asking the subject which percept is currently visible. This is problematic because the response is unverifiable, open to response bias, and falsely assumes that the perceptual

  20. Measure Evaluation Dataverse

    Data.gov (United States)

    US Agency for International Development — The MEASURE Evaluation Dataverse is a collection of innovative evaluation data sets assembled in order to increase the evidence-base on program impact and evaluate...

  1. Measure, integral and probability

    CERN Document Server

    Capiński, Marek

    2004-01-01

    Measure, Integral and Probability is a gentle introduction that makes measure and integration theory accessible to the average third-year undergraduate student. The ideas are developed at an easy pace in a form that is suitable for self-study, with an emphasis on clear explanations and concrete examples rather than abstract theory. For this second edition, the text has been thoroughly revised and expanded. New features include: · a substantial new chapter, featuring a constructive proof of the Radon-Nikodym theorem, an analysis of the structure of Lebesgue-Stieltjes measures, the Hahn-Jordan decomposition, and a brief introduction to martingales · key aspects of financial modelling, including the Black-Scholes formula, discussed briefly from a measure-theoretical perspective to help the reader understand the underlying mathematical framework. In addition, further exercises and examples are provided to encourage the reader to become directly involved with the material.

  2. Photovoltaic spectral responsivity measurements

    Energy Technology Data Exchange (ETDEWEB)

    Emery, K.; Dunlavy, D.; Field, H.; Moriarty, T. [National Renewable Energy Lab., Golden, CO (United States)

    1998-09-01

    This paper discusses the various elemental random and nonrandom error sources in typical spectral responsivity measurement systems. The authors focus specifically on the filter and grating monochrometer-based spectral responsivity measurement systems used by the Photovoltaic (PV) performance characterization team at NREL. A variety of subtle measurement errors can occur that arise from a finite photo-current response time, bandwidth of the monochromatic light, waveform of the monochromatic light, and spatial uniformity of the monochromatic and bias lights; the errors depend on the light source, PV technology, and measurement system. The quantum efficiency can be a function of he voltage bias, light bias level, and, for some structures, the spectral content of the bias light or location on the PV device. This paper compares the advantages and problems associated with semiconductor-detector-based calibrations and pyroelectric-detector-based calibrations. Different current-to-voltage conversion and ac photo-current detection strategies employed at NREL are compared and contrasted.

  3. Measuring Physical Activity Intensity

    Medline Plus

    Full Text Available ... rate and breathing. The talk test is a simple way to measure relative intensity. In general, if ... Healthy Weight Breastfeeding Micronutrient Malnutrition State and Local Programs File Formats Help: How do I view different ...

  4. RESULTS OF SLICE MEASUREMENTS

    CERN Document Server

    Rudolph, J

    2011-01-01

    The linear accelerator ELBE delivers high-brightness electron bunches to multiple user stations, including two IR-FEL oscillators [1], [2]. In the framework of an upgrade program the current thermionic injector is being replaced by a SRF-photoinjector [3], [4]. The SRF injector promises higher beam quality, especially required for future experiments with high power laser radiation. During the commissioning phase, the SRF-injector was running in parallel to the thermionic gun. After installation of a injection beamline (dogleg), beam from the SRF-injector can now be injected into the ELBE linac. Detailed characterization of the electron beam quality delivered by the new electron injector includes vertical slice emittance measurements in addition to measurements of projected emittance values. This report gives an overview of the status of the project and summarizes first measurement results as well as results of simulations performed with measurement settings.

  5. Measuring Salinity by Conductivity.

    Science.gov (United States)

    Lapworth, C. J.

    1981-01-01

    Outlines procedures for constructing an instrument which uses an electrode and calibration methods to measure the salinity of waters in environments close to and affected by a saline estuary. (Author/DC)

  6. Measuring Physical Activity Intensity

    Medline Plus

    Full Text Available ... Physical Activity Basics Needs for Adults Needs for Children What Counts Needs for Older Adults Needs for ... Adding Physical Activity to Your Life Activities for Children Activities for Older Adults Overcoming Barriers Measuring Physical ...

  7. Standardization of depression measurement

    DEFF Research Database (Denmark)

    Wahl, Inka; Löwe, Bernd; Bjørner, Jakob

    2014-01-01

    comparisons among included measures. Large differences were found in their measurement precision and range, providing a rationale for instrument selection. Published scale-specific threshold scores of depression severity showed remarkable consistencies across different questionnaires. CONCLUSION: An IRT-based......OBJECTIVES: To provide a standardized metric for the assessment of depression severity to enable comparability among results of established depression measures. STUDY DESIGN AND SETTING: A common metric for 11 depression questionnaires was developed applying item response theory (IRT) methods. Data...... instrument-independent metric for depression severity enables direct comparisons among established measures. The "common ruler" simplifies the interpretation of depression assessment by identifying key thresholds for clinical and epidemiologic decision making and facilitates integrative psychometric research...

  8. Health System Measurement Project

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Health System Measurement Project tracks government data on critical U.S. health system indicators. The website presents national trend data as well as detailed...

  9. Quality Measurement Impact Reports

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Secretary of the Department of Health and Human Services is required to assess the impact of consensus-endorsed quality and efficiency measures used in federal...

  10. Measuring Physical Activity Intensity

    Medline Plus

    Full Text Available ... Button Our Division About Us Nutrition Physical Activity Overweight & Obesity Healthy Weight Breastfeeding Micronutrient Malnutrition State and Local Programs Measuring Physical Activity Intensity Recommend on Facebook Tweet Share Compartir For ...

  11. "Centripede"-measuring device

    CERN Multimedia

    CERN PhotoLab

    1973-01-01

    "Centripede"-measuring device for the geometrical pole shape of the quadrupoles, developed by the electronics and mechanics section of the Survey Group. The black box contains a precision clinometer, which gives the transversal tilt of the reference plane.

  12. Measuring Physical Activity Intensity

    Medline Plus

    Full Text Available ... Measuring Intensity Target Heart Rate and Estimated Maximum Heart Rate Perceived Exertion (Borg Rating of Perceived Exertion Scale) Get Email Updates To receive email updates about this page, enter your ... ...

  13. Littoral Measurements Facility

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: Barny units measure ocean currents and sea surface heights on continental shelves and in ocean straits. SEPTR units are similar to Barnys but also record...

  14. Fission Measurements with Dance

    Science.gov (United States)

    Jandel, M.; Bredeweg, T. A.; Fowler, M. M.; Bond, E. M.; Chadwick, M. B.; Clement, R. R.; Couture, A.; O'Donnell, J. M.; Haight, R. C.; Keksis, A. L.; Reifarth, R.; Rundberg, R. S.; Ullmann, J. L.; Vieira, D. J.; Wilhelmy, J. B.; Wouters, J. M.; Agvaanluvsan, U.; Dashdorj, D.; Macri, R. A.; Parker, W. E.; Wilk, P. A.; Wu, C. Y.; Becker, J. A.; Angell, C. T.; Tonchev, A. P.; Baker, J. D.

    2008-08-01

    Neutron capture cross section measurements on actinides are complicated by the presence of neutron-induced fission. An efficient fission tagging detector used in coincidence with the Detector for Advanced Neutron Capture Experiments (DANCE) provides a powerful tool in undertaking simultaneous measurements of (n,γ) and (n,f) cross sections. Preliminary results on 235U(n,γ) and (n,f) and 242mAm(n,f) cross sections measured with DANCE and a custom fission-tagging parallel plate avalanche counter (PPAC) are presented. Additional measurements of γ-ray cluster multiplicity distributions for neutron-induced fission of 235U and 242mAm and spontaneous fission of 252Cf are shown, as well as γ-ray energy and average γ-ray energy distributions.

  15. Measuring Physical Activity Intensity

    Medline Plus

    Full Text Available ... Measuring Intensity Target Heart Rate and Estimated Maximum Heart Rate Perceived Exertion (Borg Rating of Perceived Exertion Scale) Get Email Updates To receive email updates about this page, enter your email ... ...

  16. Measuring Relative Humidity.

    Science.gov (United States)

    Pinkham, Chester A.; Barrett, Kristin Burrows

    1992-01-01

    Describes four experiments that enable students to explore the phenomena of evaporation and condensation and determine the relative humidity by measuring air temperature and dew point on warm September days. Provides tables to calculate saturation points and relative humidity. (MDH)

  17. Blood pressure measurement

    Science.gov (United States)

    Diastolic blood pressure; Systolic blood pressure; Blood pressure reading; Measuring blood pressure ... or your health care provider will wrap the blood pressure cuff snugly around your upper arm. The lower ...

  18. Measuring Inequality and Segregation

    CERN Document Server

    Roberto, Elizabeth

    2015-01-01

    In this paper, I introduce the Divergence Index, a conceptually intuitive and methodologically rigorous measure of inequality and segregation. The index measures the difference between a distribution of interest and another empirical, theoretical, or normative distribution. The Divergence Index provides flexibility in specifying a theoretically meaningful basis for evaluating inequality. It evaluates how surprising an empirical distribution is given a theoretical distribution that represents equality. I demonstrate the unique features of the new measure, as well as deriving its mathematical equivalence with Theil's Inequality Index and the Information Theory Index. I compare the dynamics of the measures using simulated data, and an empirical analysis of racial residential segregation in the Detroit, MI, metro area. The Information Theory Index has become the gold standard for decomposition analyses of segregation. I show that although the Information Theory Index can be decomposed for subareas, it is misleadi...

  19. Measuring Physical Activity Intensity

    Medline Plus

    Full Text Available ... Compartir For more help with what counts as aerobic activity, watch this video: Windows Media Player, 4: ... ways to understand and measure the intensity of aerobic activity: relative intensity and absolute intensity. Relative Intensity ...

  20. Measurement theory for engineers

    CERN Document Server

    Gertsbakh, Ilya

    2003-01-01

    The emphasis of this textbook is on industrial applications of Statistical Measurement Theory. It deals with the principal issues of measurement theory, is concise and intelligibly written, and to a wide extent self-contained. Difficult theoretical issues are separated from the mainstream presentation. Each topic starts with an informal introduction followed by an example, the rigorous problem formulation, solution method, and a detailed numerical solution. Each chapter concludes with a set of exercises of increasing difficulty, mostly with solutions. The book is meant as a text for graduate students and a reference for researchers and industrial experts specializing in measurement and measurement data analysis for quality control, quality engineering and industrial process improvement using statistical methods. Knowledge of calculus and fundamental probability and statistics is required for the understanding of its contents.

  1. Higgs measurements with ATLAS

    CERN Document Server

    Queitsch-Maitland, Michaela; The ATLAS collaboration

    2017-01-01

    The final Run 1 and first Run 2 results with the ATLAS detector on the measurement of the cross sections, couplings and properties of the Higgs boson in individual final states and their combination are presented.

  2. Measuring Physical Activity Intensity

    Medline Plus

    Full Text Available ... Adults Needs for Children What Counts Needs for Older Adults Needs for Pregnant or Postpartum Women Physical Activity & ... to Your Life Activities for Children Activities for Older Adults Overcoming Barriers Measuring Physical Activity Intensity Target Heart ...

  3. Wind Measurement LIDAR Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Systems & Processes Engineering Corporation (SPEC) proposes a Wind Measurement LIDAR whose sensor assembly is composed of SPEC Gen IV LIDAR seeker, with 12.8...

  4. Temperature measurement and control

    CERN Document Server

    Leigh, JR

    1988-01-01

    This book treats the theory and practice of temperature measurement and control and important related topics such as energy management and air pollution. There are no specific prerequisites for the book although a knowledge of elementary control theory could be useful. The first half of the book is an application oriented survey of temperature measurement techniques and devices. The second half is concerned mainly with temperature control in both simple and complex situations.

  5. Large Curved Surface Measurement

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The measurement principle of large curved surface through theodolite industry survey system is introduced. Two methods are suggested with respect to the distribution range of curved surface error. The experiments show that the measurement precision can be up to 0.15mm with relative precision of 3×10-5. Finally, something needed paying attention to and the application aspects on theodolite industry survey system are given.

  6. Lebesgue measure and gambling

    Science.gov (United States)

    Kanoveĭ, V. G.; Linton, Tom; Uspensky, Vladimir A.

    2008-12-01

    Lebesgue measure of point sets is characterized in terms of the existence of various strategies in a certain coin-flipping game. 'Rational' and 'discrete' modifications of this game are investigated. We prove that if one of the players has a winning strategy in a game of this type depending on a given set P\\subseteq \\lbrack 0,1 \\rbrack , then this set is measurable. Bibliography: 11 titles.

  7. How to measure efficiency?

    CERN Document Server

    Legrand, Arnaud

    2007-01-01

    In the context of applied game theory in networking environments, a number of concepts have been proposed to measure both efficiency and optimality of resource allocations, the most famous certainly being the price of anarchy and the Jain index. Yet, very few have tried to question these measures and compare them one to another, in a general framework, which is the aim of the present article.

  8. Safeguards and physics measurements

    Energy Technology Data Exchange (ETDEWEB)

    Carchon, R

    2002-04-01

    SCK-CEN's programme on safeguards and physics measurements involves gamma and neutron dosimetry, calibrations and irradiations, electronic support, metrology of various samples including internal contamination of human beings, of waste barrels and of fissile materials, neutron activation analysis, and radioisotope source preparation. The document reports on the main activities and achievements of the sections 'Instrumentation, Calibration and Dosimetry' and 'Safeguards and Nuclear Physics Measurements'.

  9. Theory of Effectiveness Measurement

    Science.gov (United States)

    2006-09-01

    according to a rule ( Stevens , 1959:25). However, not all assignment techniques are useful and some techniques have constraints on how the results can...3. Scale Hierarchy of Commonly Used Measures (Ford, 1993:9) Despite the generalized notation, only a few scale types exist ( Stevens , 1946:677...systems, a high order polynomial may yield an aggregated measure more closely capturing the system’s underlying nature ( Pinker , 1995:10): M=∑wimi+∑wimi2

  10. Process measuring techniques; Prozessmesstechnik

    Energy Technology Data Exchange (ETDEWEB)

    Freudenberger, A.

    2000-07-01

    This introduction into measurement techniques for chemical and process-technical plant in science and industry describes in detail the methods used to measure basic quantities. Most prominent are modern measuring techniques by means of ultrasound, microwaves and the Coriolis effect. Alongside physical and measuring technique fundamentals, the practical applications of measuring devices are described. Calculation examples are given to illustrate the subject matter. The book addresses students of physical engineering, process engineering and environmental engineering at technical schools as well as engineers of other disciplines wishing to familiarize themselves with the subject of process measurement techniques. (orig.) [German] Diese Einfuehrung in die Messtechnik fuer chemische und verfahrens-technische Forschungs- und Produktionsanlagen beschreibt ausfuehrlich die Methoden zur Messung der Basisgroessen. Moderne Messverfahren mit Ultraschall, Mikrowellen und Coriolis-Effekt stehen dabei im Vordergrund. Beruecksichtigung finden sowohl die physikalischen und messtechnischen Grundlagen als auch die praktischen Anwendungen der Geraete. Berechnungsbeispiele dienen der Erlaeuterung und Vertiefung des Stoffes. Angesprochen sind Studenten der Ingenieurstufengaenge Physikalische Technik und Verfahrens- und Umwelttechnik an Fachhochschulen als auch Ingenieure anderer Fachrichtungen, die sich in das Gebiet der Prozessmesstechnik einarbeiten wollen. (orig.)

  11. Thermodynamics of quantum measurements

    CERN Document Server

    Erez, Noam

    2010-01-01

    Quantum measurement of a system can change its mean energy, as well as entropy. A selective measurement (classical or quantum) can be used as a "Maxwell's demon" to power a single-temperature heat engine, by decreasing the entropy. Quantum mechanically, so can a non-selective measurement, despite increasing the entropy of a thermal state. The maximal amount of work extractable following the measurement is given by the change in free energy: $W_{max}^{(non-)sel.}=\\Delta E_{meas}-T_{Bath}\\Delta S_{meas}^{(non-)sel.}$. This follows from the "generalized 2nd law for nonequilibrium initial state" [Hasegawa et. al, PLA (2010)], of which an elementary reduction to the standard law is given here. It is shown that $W_{max}^{sel.}-W_{max}^{non-sel.}$ equals the work required to reset the memory of the measuring device, and that no such resetting is needed in the non-selective case. Consequently, a single-bath engine powered by either kind of measurement works at a net loss of $T_{Bath}\\Delta S_{meas}^{non-sel}$ per cyc...

  12. Measurement dependent locality

    Science.gov (United States)

    Pütz, Gilles; Gisin, Nicolas

    2016-05-01

    The demonstration and use of Bell-nonlocality, a concept that is fundamentally striking and is at the core of applications in device independent quantum information processing, relies heavily on the assumption of measurement independence, also called the assumption of free choice. The latter cannot be verified or guaranteed. In this paper, we consider a relaxation of the measurement independence assumption. We briefly review the results of Pütz et al (2014 Phys. Rev. Lett. 113 190402), which show that with our relaxation, the set of so-called measurement dependent local (MDL) correlations is a polytope, i.e. it can be fully described using a finite set of linear inequalities. Here we analyze this polytope, first in the simplest case of two parties with binary inputs and outputs, for which we give a full characterization. We show that partially entangled states are preferable to the maximally entangled state when dealing with measurement dependence in this scenario. We further present a method which transforms any Bell-inequality into an MDL inequality and give valid inequalities for the case of arbitrary number of parties as well as one for arbitrary number of inputs. We introduce the assumption of independent sources in the measurement dependence scenario and give a full analysis for the bipartite scenario with binary inputs and outputs. Finally, we establish a link between measurement dependence and another strong hindrance in certifying nonlocal correlations: nondetection events.

  13. Learnable hyperspectral measures

    Directory of Open Access Journals (Sweden)

    A. Galal

    2012-07-01

    Full Text Available Hyperspectral measures are used to capture the degree of similarity between two spectra. Spectral Angle Mapper (SAM is an example of such measures. SAM similarity values range from 0 to 1. These values do not indicate whether the two spectra are similar or not. A static similarity threshold is imposed to recognize similar and dissimilar spectra. Adjusting such threshold is a troublesome process. To overcome this problem, the proposed approach aims to develop learnable hyperspectral measures. This is done through using hyperspectral measures values as similarity patterns and employing a classifier. The classifier acts as an adaptive similarity threshold. The derived similarity patterns are flexible as they are able to capture the specific notion of similarity that is appropriate for each spectral region. Two similarity patterns are proposed. The first pattern is the cosine similarity vector for the second spectral derivative pair. The second pattern is a composite vector of different similarity measures values. The proposed approach is applied on full hyperspectral space and subspaces. Experiments were conducted on a challenging benchmark dataset. Experimental results showed that, classifications based on second patterns were far better than first patterns. This is because first patterns were concerned only with the geometrical features of the spectral signatures, while second patterns combined various discriminatory features such as: orthogonal projections information, correlation coefficients, and probability distributions produced by the spectral signatures. The proposed approach results are statistically significant. This implies that using simple learnable measures overcomes complex and manually tuned techniques used in classification tasks.

  14. How to measure metacognition.

    Science.gov (United States)

    Fleming, Stephen M; Lau, Hakwan C

    2014-01-01

    The ability to recognize one's own successful cognitive processing, in e.g., perceptual or memory tasks, is often referred to as metacognition. How should we quantitatively measure such ability? Here we focus on a class of measures that assess the correspondence between trial-by-trial accuracy and one's own confidence. In general, for healthy subjects endowed with metacognitive sensitivity, when one is confident, one is more likely to be correct. Thus, the degree of association between accuracy and confidence can be taken as a quantitative measure of metacognition. However, many studies use a statistical correlation coefficient (e.g., Pearson's r) or its variant to assess this degree of association, and such measures are susceptible to undesirable influences from factors such as response biases. Here we review other measures based on signal detection theory and receiver operating characteristics (ROC) analysis that are "bias free," and relate these quantities to the calibration and discrimination measures developed in the probability estimation literature. We go on to distinguish between the related concepts of metacognitive bias (a difference in subjective confidence despite basic task performance remaining constant), metacognitive sensitivity (how good one is at distinguishing between one's own correct and incorrect judgments) and metacognitive efficiency (a subject's level of metacognitive sensitivity given a certain level of task performance). Finally, we discuss how these three concepts pose interesting questions for the study of metacognition and conscious awareness.

  15. Measures of rowing performance.

    Science.gov (United States)

    Smith, T Brett; Hopkins, Will G

    2012-04-01

    Accurate measures of performance are important for assessing competitive athletes in practi~al and research settings. We present here a review of rowing performance measures, focusing on the errors in these measures and the implications for testing rowers. The yardstick for assessing error in a performance measure is the random variation (typical or standard error of measurement) in an elite athlete's competitive performance from race to race: ∼1.0% for time in 2000 m rowing events. There has been little research interest in on-water time trials for assessing rowing performance, owing to logistic difficulties and environmental perturbations in performance time with such tests. Mobile ergometry via instrumented oars or rowlocks should reduce these problems, but the associated errors have not yet been reported. Measurement of boat speed to monitor on-water training performance is common; one device based on global positioning system (GPS) technology contributes negligible extra random error (0.2%) in speed measured over 2000 m, but extra error is substantial (1-10%) with other GPS devices or with an impeller, especially over shorter distances. The problems with on-water testing have led to widespread use of the Concept II rowing ergometer. The standard error of the estimate of on-water 2000 m time predicted by 2000 m ergometer performance was 2.6% and 7.2% in two studies, reflecting different effects of skill, body mass and environment in on-water versus ergometer performance. However, well trained rowers have a typical error in performance time of only ∼0.5% between repeated 2000 m time trials on this ergometer, so such trials are suitable for tracking changes in physiological performance and factors affecting it. Many researchers have used the 2000 m ergometer performance time as a criterion to identify other predictors of rowing performance. Standard errors of the estimate vary widely between studies even for the same predictor, but the lowest

  16. The performance measurement manifesto.

    Science.gov (United States)

    Eccles, R G

    1991-01-01

    The leading indicators of business performance cannot be found in financial data alone. Quality, customer satisfaction, innovation, market share--metrics like these often reflect a company's economic condition and growth prospects better than its reported earnings do. Depending on an accounting department to reveal a company's future will leave it hopelessly mired in the past. More and more managers are changing their company's performance measurement systems to track nonfinancial measures and reinforce new competitive strategies. Five activities are essential: developing an information architecture; putting the technology in place to support this architecture; aligning bonuses and other incentives with the new system; drawing on outside resources; and designing an internal process to ensure the other four activities occur. New technologies and more sophisticated databases have made the change to nonfinancial performance measurement systems possible and economically feasible. Industry and trade associations, consulting firms, and public accounting firms that already have well-developed methods for assessing market share and other performance metrics can add to the revolution's momentum--as well as profit from the business opportunities it presents. Every company will have its own key measures and distinctive process for implementing the change. But making it happen will always require careful preparation, perseverance, and the conviction of the CEO that it must be carried through. When one leading company can demonstrate the long-term advantage of its superior performance on quality or innovation or any other nonfinancial measure, it will change the rules for all its rivals forever.

  17. Interpolation of Vector Measures

    Institute of Scientific and Technical Information of China (English)

    Ricardo del CAMPO; Antonio FERN(A)NDEZ; Fernando MAYORAL; Francisco NARANJO; Enrique A. S(A)NCHEZ-P(E)REZ

    2011-01-01

    Let (Ω, ∑) be a measurable space and m0: ∑→ X0 and m1: ∑ -→ X1 be positive vector measures with values in the Banach K(o)the function spaces X0 and X1. If 0 < α < 1, we define a X10-αXα1 and we analyze the space of integrable functions with respect to measure [m0, m1]α in order to prove suitable extensions of the classical Stein-Weiss formulas that hold for the complex interpolation of Lp-spaces.Since each p-convex order continuous K(o)the function space with weak order unit can be represented as a space of p-integrable functions with respect to a vector measure, we provide in this way a technique to obtain representations of the corresponding complex interpolation spaces. As applications, we provide a Riesz-Thorin theorem for spaces of p-integrable functions with respect to vector measures and a formula for representing the interpolation of the injective tensor product of such spaces.

  18. Measuring past a micron...

    CERN Multimedia

    Anaïs Schaeffer

    2011-01-01

    Infinity: That is the name of the new ultra-precision machine used by CERN's Metrology Service to measure the copper components for the CLIC accelerating structures. This project is the result of a collaboration between CLIC and the EN Department. Curious to find out more? Read on because there’ll be an opportunity for you to get a very close look at Infinity!    Infinity, the new, ultra-precise, measuring machine, is currently in operation at the CERN Metrology Service. The CLIC (Compact LInear Collider) radiofrequency structures will operate under very high electric fields (100 MV/m). They should be manufactured within minimal mechanical tolerances. To validate the quality of these components, they have to be measured with a precision that far exceeds the machining tolerances, i.e. 0.3 microns. No “ordinary” measuring machine can achieve this precision, but Infinity, the newly developed high-precision three-dimensional measuring machine i...

  19. A Pattern Measure

    CERN Document Server

    Klinger, Allen

    2011-01-01

    In this paper we propose numerical measures for evaluating the aesthetic interest of simple patterns. The patterns consist of elements (symbols, pixels, etc.) in regular square arrays. The measures depend on two characteristics of the patterns: the number of different types of element, and the number of symmetries in their arrangement. We define two complementary composite measures L and C for the degree of pattern in a design, and compute them here for 2x2 and 6x6 arrays. The results distinguish simple from high-variation cases. We suspect that the measure L corresponds to the degree that human beings intuitively feel a design to be "interesting", so this model would aid in quantifying the visual connection of two- dimensional designs with viewers. The other composite measure C based on these numerical properties characterizes the extent of randomness of an array. Combining symbol variety with symmetry calculations allows us to employ hierarchical scaling to count the relative impact of different levels of s...

  20. Measurement, Interpretation and Information

    Directory of Open Access Journals (Sweden)

    Olimpia Lombardi

    2015-10-01

    Full Text Available During many years since the birth of quantum mechanics, instrumentalistinterpretations prevailed: the meaning of the theory was expressed in terms of measurementsresults. However, in the last decades, several attempts to interpret it from a realist viewpointhave been proposed. Among them, modal interpretations supply a realist non-collapseaccount, according to which the system always has definite properties and the quantum staterepresents possibilities, not actualities. But the traditional modal interpretations faced someconceptual problems when addressing imperfect measurements. The modal-Hamiltonianinterpretation, on the contrary, proved to be able to supply an adequate account of themeasurement problem, both in its ideal and its non-ideal versions. Moreover, in the non-idealcase, it gives a precise criterion to distinguish between reliable and non-reliable measurements.Nevertheless, that criterion depends on the particular state of the measured system, and thismight be considered as a shortcoming of the proposal. In fact, one could ask for a criterionof reliability that does not depend on the features of what is measured but only on theproperties of the measurement device. The aim of this article is precisely to supply such acriterion: we will adopt an informational perspective for this purpose.

  1. Advanced Ceramics Property Measurements

    Science.gov (United States)

    Salem, Jonathan; Helfinstine, John; Quinn, George; Gonczy, Stephen

    2013-01-01

    Mechanical and physical properties of ceramic bodies can be difficult to measure correctly unless the proper techniques are used. The Advanced Ceramics Committee of ASTM, C-28, has developed dozens of consensus test standards and practices to measure various properties of a ceramic monolith, composite, or coating. The standards give the "what, how, how not, and why" for measurement of many mechanical, physical, thermal, and performance properties. Using these standards will provide accurate, reliable, and complete data for rigorous comparisons with other test results from your test lab, or another. The C-28 Committee has involved academics, producers, and users of ceramics to write and continually update more than 45 standards since the committee's inception in 1986. Included in this poster is a pictogram of the C-28 standards and information on how to obtain individual copies with full details or the complete collection of standards in one volume.

  2. Measures of Information

    Directory of Open Access Journals (Sweden)

    Paul Walton

    2015-01-01

    Full Text Available This paper builds an integrated framework of measures of information based on the Model for Information (MfI developed by the author. Since truth is expressed using information, an analysis of truth depends on the nature of information and its limitations. These limitations include those implied by the geometry of information and those implied by the relativity of information. This paper proposes an approach to truth and truthlikeness that takes these limitations into account by incorporating measures of the quality of information. Another measure of information is the amount of information. This has played a role in two important theoretical difficulties—the Bar-Hillel Carnap paradox and the “scandal of deduction”. This paper further provides an analysis of the amount of information, based on MfI, and shows how the MfI approach can resolve these difficulties.

  3. Thermal Properties Measurement Report

    Energy Technology Data Exchange (ETDEWEB)

    Carmack, Jon [Idaho National Lab. (INL), Idaho Falls, ID (United States); Braase, Lori [Idaho National Lab. (INL), Idaho Falls, ID (United States); Papesch, Cynthia [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hurley, David [Idaho National Lab. (INL), Idaho Falls, ID (United States); Tonks, Michael [Idaho National Lab. (INL), Idaho Falls, ID (United States); Zhang, Yongfeng [Idaho National Lab. (INL), Idaho Falls, ID (United States); Gofryk, Krzysztof [Idaho National Lab. (INL), Idaho Falls, ID (United States); Harp, Jason [Idaho National Lab. (INL), Idaho Falls, ID (United States); Fielding, Randy [Idaho National Lab. (INL), Idaho Falls, ID (United States); Knight, Collin [Idaho National Lab. (INL), Idaho Falls, ID (United States); Meyer, Mitch [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-08-01

    The Thermal Properties Measurement Report summarizes the research, development, installation, and initial use of significant experimental thermal property characterization capabilities at the INL in FY 2015. These new capabilities were used to characterize a U3Si2 (candidate Accident Tolerant) fuel sample fabricated at the INL. The ability to perform measurements at various length scales is important and provides additional data that is not currently in the literature. However, the real value of the data will be in accomplishing a phenomenological understanding of the thermal conductivity in fuels and the ties to predictive modeling. Thus, the MARMOT advanced modeling and simulation capability was utilized to illustrate how the microstructural data can be modeled and compared with bulk characterization data. A scientific method was established for thermal property measurement capability on irradiated nuclear fuel samples, which will be installed in the Irradiated Material Characterization Laboratory (IMCL).

  4. Metrology Measurement Capabilities

    Energy Technology Data Exchange (ETDEWEB)

    Barnes, L.M.

    2000-03-23

    This document contains descriptions of Federal Manufacturing and Technologies (FM and T) Metrology capabilities, traceability flow charts, and the measurement uncertainty of each measurement capability. Metrology provides NIST traceable precision measurements or equipment calibration for a wide variety of parameters, ranges, and state-of-the-art uncertainties in laboratories that conform to the requirements of the Department of Energy Development and Production Manual Chapter 8.4, and ANSI/NCSL Z540-1 (equivalent to ISO Guide 25). FM and T Metrology laboratories are accredited by NVLAP for the parameters, ranges, and uncertainties listed in the specific scope of accreditation under NVLAP Lab code 200108-0. These parameters are summarized.

  5. Metrology Measurement Capabilities

    Energy Technology Data Exchange (ETDEWEB)

    Barnes, L.M.

    2003-11-12

    This document contains descriptions of Federal Manufacturing & Technologies (FM&T) Metrology capabilities, traceability flow charts, and the measurement uncertainty of each measurement capability. Metrology provides NIST traceable precision measurements or equipment calibration for a wide variety of parameters, ranges, and state-of-the-art uncertainties. Metrology laboratories conform to the requirements of the Department of Energy Development and Production Manual Chapter 8.4, ANSI/ISO/IEC ANSI/ISO/IEC 17025:2000, and ANSI/NCSL Z540-1 (equivalent to ISO Guide 25). FM&T Metrology laboratories are accredited by NVLAP for the parameters, ranges, and uncertainties listed in the specific scope of accreditation under NVLAP Lab code 200108-0. See the Internet at http://ts.nist.gov/ts/htdocs/210/214/scopes/2001080.pdf. These parameters are summarized in the table at the bottom of this introduction.

  6. Neutron beam measurement dosimetry

    Energy Technology Data Exchange (ETDEWEB)

    Amaro, C.R. [Idaho National Engineering Lab., Idaho Falls, ID (United States)

    1995-11-01

    This report describes animal dosimetry studies and phantom measurements. During 1994, 12 dogs were irradiated at BMRR as part of a 4 fraction dose tolerance study. The animals were first infused with BSH and irradiated daily for 4 consecutive days. BNL irradiated 2 beagles as part of their dose tolerance study using BPA fructose. In addition, a dog at WSU was irradiated at BMRR after an infusion of BPA fructose. During 1994, the INEL BNCT dosimetry team measured neutron flux and gamma dose profiles in two phantoms exposed to the epithermal neutron beam at the BMRR. These measurements were performed as a preparatory step to the commencement of human clinical trials in progress at the BMRR.

  7. Enterprise performance measurement systems

    Directory of Open Access Journals (Sweden)

    Milija Bogavac

    2014-10-01

    Full Text Available Performance measurement systems are an extremely important part of the control and management actions, because in this way a company can determine its business potential, its market power, potential and current level of business efficiency. The significance of measurement consists in influencing the relationship between the results of reproduction (total volume of production, value of production, total revenue and profit and investments to achieve these results (factors of production spending and hiring capital in order to achieve the highest possible quality of the economy. (The relationship between the results of reproduction and investment to achieve them quantitatively determines economic success as the quality of the economy. Measuring performance allows the identification of the economic resources the company has, so looking at the key factors that affect its performance can help to determine the appropriate course of action.

  8. Measurement uncertainty relations

    Energy Technology Data Exchange (ETDEWEB)

    Busch, Paul, E-mail: paul.busch@york.ac.uk [Department of Mathematics, University of York, York (United Kingdom); Lahti, Pekka, E-mail: pekka.lahti@utu.fi [Turku Centre for Quantum Physics, Department of Physics and Astronomy, University of Turku, FI-20014 Turku (Finland); Werner, Reinhard F., E-mail: reinhard.werner@itp.uni-hannover.de [Institut für Theoretische Physik, Leibniz Universität, Hannover (Germany)

    2014-04-15

    Measurement uncertainty relations are quantitative bounds on the errors in an approximate joint measurement of two observables. They can be seen as a generalization of the error/disturbance tradeoff first discussed heuristically by Heisenberg. Here we prove such relations for the case of two canonically conjugate observables like position and momentum, and establish a close connection with the more familiar preparation uncertainty relations constraining the sharpness of the distributions of the two observables in the same state. Both sets of relations are generalized to means of order α rather than the usual quadratic means, and we show that the optimal constants are the same for preparation and for measurement uncertainty. The constants are determined numerically and compared with some bounds in the literature. In both cases, the near-saturation of the inequalities entails that the state (resp. observable) is uniformly close to a minimizing one.

  9. Measurement of the $\

    CERN Document Server

    Aharmim, B; Amsbaugh, J F; Anaya, J M; Anthony, A E; Banar, J; Barros, N; Beier, E W; Bellerive, A; Beltran, B; Bergevin, M; Biller, S D; Boudjemline, K; Boulay, M G; Bowles, T J; Browne, M C; Bullard, T V; Burritt, T H; Cai, B; Chan, Y D; Chauhan, D; Chen, M; Cleveland, B T; Cox, G A; Currat, C A; Dai, X; Deng, H; Detwiler, J A; DiMarco, M; Doe, P J; Doucas, G; Dragowsky, M R; Drouin, P -L; Duba, C A; Duncan, F A; Dunford, M; Earle, E D; Elliott, S R; Evans, H C; Ewan, G T; Farine, J; Fergani, H; Fleurot, F; Ford, R J; Formaggio, J A; Fowler, M M; Gagnon, N; Germani, J V; Goldschmidt, A; Goon, J TM; Graham, K; Guillian, E; Habib, S; Hahn, R L; Hallin, A L; Hallman, E D; Hamian, A A; Harper, G C; Harvey, P J; Hazama, R; Heeger, K M; Heintzelman, W J; Heise, J; Helmer, R L; Henning, R; Hime, A; Howard, C; Howe, M A; Huang, M; Jagam, P; Jamieson, B; Jelley, N A; Keeter, K J; Klein, J R; Kormos, L L; Kos, M; Krueger, A; Kraus, C; Krauss, C B; Kutter, T; Kyba, C C M; Lange, R; Law, J; Lawson, I T; Lesko, K T; Leslie, J R; Loach, J C; MacLellan, R; Majerus, S; Mak, H B; Maneira, J; Martin, R; McCauley, N; McDonald, A B; McGee, S R; Mifflin, C; Miller, G G; Miller, M L; Monreal, B; Monroe, J; Morissette, B; Myers, A W; Nickel, B G; Noble, A J; O'Keeffe, H M; Oblath, N S; Ollerhead, R W; Gann, G D Orebi; Oser, S M; Ott, R A; Peeters, S J M; Poon, A W P; Prior, G; Reitzner, S D; Rielage, K; Robertson, B C; Robertson, R G H; Rollin, E; Schwendener, M H; Secrest, J A; Seibert, S R; Simard, O; Simpson, J J; Skensved, P; Smith, M W E; Sonley, T J; Steiger, T D; Stonehill, L C; Tesic, G; Thornewell, P M; Tolich, N; Tsui, T; Tunnell, C D; Van Wechel, T; Van Berg, R; VanDevender, B A; Virtue, C J; Wall, B L; Waller, D; Tseung, H Wan Chan; Wendland, J; West, N; Wilhelmy, J B; Wilkerson, J F; Wilson, J R; Wouters, J M; Wright, A; Yeh, M; Zhang, F; Zuber, K

    2011-01-01

    This paper details the solar neutrino analysis of the 385.17-day Phase-III data set acquired by the Sudbury Neutrino Observatory (SNO). An array of $^3$He proportional counters was installed in the heavy-water target to measure precisely the rate of neutrino-deuteron neutral-current interactions. This technique to determine the total active $^8$B solar neutrino flux was largely independent of the methods employed in previous phases. The total flux of active neutrinos was measured to be $5.54^{+0.33}_{-0.31}(stat.)^{+0.36}_{-0.34}(syst.)\\times 10^{6}$ cm$^{-2}$ s$^{-1}$, consistent with previous measurements and standard solar models. A global analysis of solar and reactor neutrino mixing parameters yielded the best-fit values of $\\Delta m^2 = 7.59^{+0.19}_{-0.21}\\times 10^{-5}{eV}^2$ and $\\theta = 34.4^{+1.3}_{-1.2}$ degrees.

  10. Precision Chemical Abundance Measurements

    DEFF Research Database (Denmark)

    Yong, David; Grundahl, Frank; Meléndez, Jorge;

    2012-01-01

    This talk covers preliminary work in which we apply a strictly differential line-by-line chemical abundance analysis to high quality UVES spectra of the globular cluster NGC 6752. We achieve extremely high precision in the measurement of relative abundance ratios. Our results indicate that the ob......This talk covers preliminary work in which we apply a strictly differential line-by-line chemical abundance analysis to high quality UVES spectra of the globular cluster NGC 6752. We achieve extremely high precision in the measurement of relative abundance ratios. Our results indicate...... that the observed abundance dispersion exceeds the measurement uncertainties and that many pairs of elements show significant correlations when plotting [X1/H] vs. [X2/H]. Our tentative conclusions are that either NGC 6752 is not chemically homogeneous at the ~=0.03 dex level or the abundance variations...

  11. Measuring ambivalence to science

    Science.gov (United States)

    Gardner, P. L.

    Ambivalence is a psychological state in which a person holds mixed feelings (positive and negative) towards some psychological object. Standard methods of attitude measurement, such as Likert and semantic differential scales, ignore the possibility of ambivalence; ambivalent responses cannot be distinguished from neutral ones. This neglect arises out of an assumption that positive and negative affects towards a particular psychological object are bipolar, i.e., unidimensional in opposite directions. This assumption is frequently untenable. Conventional item statistics and measures of test internal consistency are ineffective as checks on this assumption; it is possible for a scale to be multidimensional and still display apparent internal consistency. Factor analysis is a more effective procedure. Methods of measuring ambivalence are suggested, and implications for research are discussed.

  12. Precision Measurement in Biology

    Science.gov (United States)

    Quake, Stephen

    Is biology a quantitative science like physics? I will discuss the role of precision measurement in both physics and biology, and argue that in fact both fields can be tied together by the use and consequences of precision measurement. The elementary quanta of biology are twofold: the macromolecule and the cell. Cells are the fundamental unit of life, and macromolecules are the fundamental elements of the cell. I will describe how precision measurements have been used to explore the basic properties of these quanta, and more generally how the quest for higher precision almost inevitably leads to the development of new technologies, which in turn catalyze further scientific discovery. In the 21st century, there are no remaining experimental barriers to biology becoming a truly quantitative and mathematical science.

  13. Electrochemical thermodynamic measurement system

    Science.gov (United States)

    Reynier, Yvan; Yazami, Rachid; Fultz, Brent T.

    2009-09-29

    The present invention provides systems and methods for accurately characterizing thermodynamic and materials properties of electrodes and electrochemical energy storage and conversion systems. Systems and methods of the present invention are configured for simultaneously collecting a suite of measurements characterizing a plurality of interconnected electrochemical and thermodynamic parameters relating to the electrode reaction state of advancement, voltage and temperature. Enhanced sensitivity provided by the present methods and systems combined with measurement conditions that reflect thermodynamically stabilized electrode conditions allow very accurate measurement of thermodynamic parameters, including state functions such as the Gibbs free energy, enthalpy and entropy of electrode/electrochemical cell reactions, that enable prediction of important performance attributes of electrode materials and electrochemical systems, such as the energy, power density, current rate and the cycle life of an electrochemical cell.

  14. Production measurements at LHCb

    CERN Document Server

    Rachwal, Bartlomiej

    2017-01-01

    The $\\text{LHC}b$ detector, with its excellent momentum resolution and flexible trigger strategy, is ideally suited for measuring heavy quark and quarkonia production properties. In addition, the new system of forward shower counters installed upstream and downstream has begun to be used, therefore the experiment is being suited to measure central exclusive production. The $\\text{LHC}b$ measurements of inclusive and differential cross-sections of the production of $\\text{J}/\\psi$ resonance and $\\text{J}/\\psi$ pairs, as well bottom quarks and $\\text{Z}^0$ boson, based on Run 2 datasets are summarized. Finally, results on the prompt production of open charm hadrons and the exclusive production of charmonium are discussed.

  15. Validation Measures in CMMI

    CERN Document Server

    Khraiwesh, Mahmoud

    2011-01-01

    Validation is one of the software engineering disciplines that help build quality into software. The major objective of software validation process is to determine that the software performs its intended functions correctly and provide information about its quality and reliability. This paper identifies general measures for the specific goals and its specific practices of Validation Process Area (PA) in Capability Maturity Model Integration (CMMI). CMMI is developed by Software Engineering Institute (SEI). CMMI is a framework for improvement and assessment of a software development process. CMMI needs a measurement program that is practical. The method we used to define the measures is to apply the Goal Question Metrics (GQM) paradigm to the specific goals and its specific practices of Validation Process Area in CMMI.

  16. Structural power flow measurement

    Energy Technology Data Exchange (ETDEWEB)

    Falter, K.J.; Keltie, R.F.

    1988-12-01

    Previous investigations of structural power flow through beam-like structures resulted in some unexplained anomalies in the calculated data. In order to develop structural power flow measurement as a viable technique for machine tool design, the causes of these anomalies needed to be found. Once found, techniques for eliminating the errors could be developed. Error sources were found in the experimental apparatus itself as well as in the instrumentation. Although flexural waves are the carriers of power in the experimental apparatus, at some frequencies longitudinal waves were excited which were picked up by the accelerometers and altered power measurements. Errors were found in the phase and gain response of the sensors and amplifiers used for measurement. A transfer function correction technique was employed to compensate for these instrumentation errors.

  17. New measurements techniques

    DEFF Research Database (Denmark)

    Torras Rosell, Antoni

    of the pressure encountered by the ‘sensing’ light when traveling through the acoustic field. Far from being a limitation, this integral principle is exploited for sound field visualization using tomography. The most innovative contribution of this PhD project is the applicability of the acousto-optic measuring......Acoustic measurements are traditionally based on transducers, and in particular, the most advanced measurement techniques are nowadays based on transducer arrays. This poses a fundamental problem, namely the influence of the transducer itself on the actual properties of sound when the transducer...... is immersed into the sound field. Typically, this influence is assumed to be negligible when the size of the transducer is small compared to the wavelength of the sound wave, or is rendered negligible by using a transducerbased correction that depends on the frequency. Either solution introduces additional...

  18. Surface finish measurement studies

    Science.gov (United States)

    Teague, E. C.

    1983-01-01

    The performance of stylus instruments for measuring the topography of National Transonic Facility (NTF) model surfaces both for monitoring during fabrication and as an absolute measurement of topography was evaluated. It was found that the shop-grade instruments can damage the surface of models and that their use for monitoring fabrication procedures can lead to surface finishes that are substantially out of range in critical areas of the leading edges. The development of a prototype light-scattering instrument which would allow for rapid assessment of the surface finish of a model is also discussed.

  19. Measuring Thermoforming Behaviour

    Science.gov (United States)

    Michaeli, W.; Hopmann, C.; Ederleh, L.; Begemann, M.

    2011-05-01

    Thermoforming is the process of choice for manufacturing thin-gauge or large-area parts for packaging or technical applications. The process allows low-weight parts to be produced rapidly and economically from thermoplastic semi-finished products. A technical and consequently economical problem is the choice of the right material in combination with the thermoformability of the product. The prediction of thermoformability includes the aspired product features and geometry and defined wall thickness distributions, depending on the specific stretchability of the semifinished product. In practice, thermoformability is estimated by empirical tests with the particular semi-finished product using e.g. staged pyramidal moulds or model cars. With this method, it still cannot be ensured that the product can be thermoformed with the intended properties. A promising alternative is the forming simulation using finite element analysis (FEA). For the simulation, it is necessary to describe the material behaviour using defined material models and the appropriate parameters. Therefore, the stress-/strain-behaviour of the semi-finished product under defined conditions is required. There are several, entirely different measurement techniques used in industry and at research facilities. This paper compares a choice of different measurement techniques to provide an objective basis for future work and research. The semi-finished products are examined with the Membrane-Inflation-Rheometer (MIR), an equibiaxial strain rheometer. A flat sample is heated to the desired temperature in silicone oil. During the measurement, a servohydraulic linear drive advances a piston, thus displacing the hot silicone oil and inflating the specimen to form a sphere. Further measurements are carried out with the Karo IV Laboratory Stretching Machine at Brückner Maschinenbau GmbH & Co. KG, Siegsdorf, Germany. The samples are heated using hot air. During the biaxial stretching, the resulting forces at the

  20. Top Quark Measurements

    CERN Document Server

    Juste, A

    2006-01-01

    Ten years after its discovery at the Tevatron collider, we still know little about the top quark. Its large mass suggests it may play a key role in the mechanism of Electroweak Symmetry Breaking (EWSB), or open a window of sensitivity to new physics related to EWSB and preferentially coupled to it. To determine whether this is the case, precision measurements of top quark properties are necessary. The high statistics samples being collected by the Tevatron experiments during Run II start to incisively probe the top quark sector. This report summarizes the experimental status of the top quark, focusing in particular on the recent measurements from the Tevatron Run II.

  1. Measuring Idiosyncratic Risk

    DEFF Research Database (Denmark)

    Sunesen, Eva Rytter

    This paper offers two refinements of the traditional risk measure based on the volatility of growth. First, we condition GDP growth on structural characteristics of the host country that move only slowly and therefore can be partly predicted by an investor. Second, we adjust conditional risk...... and Latin American countries, but the idiosyncratic risk factor also represents a larger share than in other developing countries. As a final contribution, we search the empirical literature on foreign direct investment and risk in order to determine which of the suggested risk measures provide the best...

  2. Disability Experience and Measurement.

    Science.gov (United States)

    Verbrugge, Lois M

    2016-10-01

    Top themes of international research on disability in the past three decades are discussed: disability dynamics, buffers and barriers for disability, disability trends, and disability among very old persons. Each theme is highlighted by research examples. Turning to measurement, I discuss traditional measures of disability, new longer and shorter ones, and composites like disability-free life expectancy, noting their merits. Contemporary models of disability are presented, ranging from visual images to formal theories. The article ends on how scientists can facilitate movement of disability science into health care practice and policy.

  3. Emission rate measuring device

    Science.gov (United States)

    Luckat, S.

    1980-09-01

    The development and application of an emission rate measuring device for gaseous components is explored. The device contains absorption fluid from a supply container that moistens a cylindrical paper sleeve. A newer model is provided with a direct current motor requiring less electricity than an older model. The hose pump is modified to avoid changing it and the filter sleeve is fastened more securely to the distributor head. Application of the measuring devices is discussed, particularly at the Cologne Cathedral, where damage to the stone is observed.

  4. Measurement of visual motion

    Energy Technology Data Exchange (ETDEWEB)

    Hildreth, E.C.

    1984-01-01

    This book examines the measurement of visual motion and the use of relative movement to locate the boundaries of physical objects in the environment. It investigates the nature of the computations that are necessary to perform this analysis by any vision system, biological or artificial. Contents: Introduction. Background. Computation of the Velocity Field. An Algorithm to Compute the Velocity Field. The Computation of Motion Discontinuities. Perceptual Studies of Motion Measurement. The Psychophysics of Discontinuity Detection. Neurophysiological Studies of Motion. Summary and Conclusions. References. Author and Subject Indexes.

  5. Measure theory and integration

    CERN Document Server

    De Barra, G

    2003-01-01

    This text approaches integration via measure theory as opposed to measure theory via integration, an approach which makes it easier to grasp the subject. Apart from its central importance to pure mathematics, the material is also relevant to applied mathematics and probability, with proof of the mathematics set out clearly and in considerable detail. Numerous worked examples necessary for teaching and learning at undergraduate level constitute a strong feature of the book, and after studying statements of results of the theorems, students should be able to attempt the 300 problem exercises whi

  6. Measuring tissue oxygenation

    Science.gov (United States)

    Soyemi, Olusola O. (Inventor); Soller, Babs R. (Inventor); Yang, Ye (Inventor)

    2009-01-01

    Methods and systems for calculating tissue oxygenation, e.g., oxygen saturation, in a target tissue are disclosed. In some embodiments, the methods include: (a) directing incident radiation to a target tissue and determining reflectance spectra of the target tissue by measuring intensities of reflected radiation from the target tissue at a plurality of radiation wavelengths; (b) correcting the measured intensities of the reflectance spectra to reduce contributions thereto from skin and fat layers through which the incident radiation propagates; (c) determining oxygen saturation in the target tissue based on the corrected reflectance spectra; and (d) outputting the determined value of oxygen saturation.

  7. SBC Dark Current Measurement

    Science.gov (United States)

    Ogaz, Sara

    2013-10-01

    This takes a series of SBC dark measurements over a continuous period of about 6 hours {4 orbits}. The aim is to collect dark images during an extended SBC on-time. Earlier measurements indicate that the dark current increases with SBC on-time and may also be increasing with overall SBC use. The 6-hour time matches the longest time used by any observer. As with all SBC observations this needs continuous SAA free time.This program is executed once per cycle. The last exposures were taken in Mar 2013 under Program 13161.

  8. Residual-stress measurements

    Energy Technology Data Exchange (ETDEWEB)

    Ezeilo, A.N.; Webster, G.A. [Imperial College, London (United Kingdom); Webster, P.J. [Salford Univ. (United Kingdom)

    1997-04-01

    Because neutrons can penetrate distances of up to 50 mm in most engineering materials, this makes them unique for establishing residual-stress distributions non-destructively. D1A is particularly suited for through-surface measurements as it does not suffer from instrumental surface aberrations commonly found on multidetector instruments, while D20 is best for fast internal-strain scanning. Two examples for residual-stress measurements in a shot-peened material, and in a weld are presented to demonstrate the attractive features of both instruments. (author).

  9. Measures and men

    CERN Document Server

    Kula, Witold

    2014-01-01

    Measures and Men, considers times and societies in which weighing and measuring were meaningful parts of everyday life and weapons in class struggles. Originally published in 1986. The Princeton Legacy Library uses the latest print-on-demand technology to again make available previously out-of-print books from the distinguished backlist of Princeton University Press. These paperback editions preserve the original texts of these important books while presenting them in durable paperback editions. The goal of the Princeton Legacy Library is to vastly increase access to the rich scholarly heri

  10. Probability and Measure

    CERN Document Server

    Billingsley, Patrick

    2012-01-01

    Praise for the Third Edition "It is, as far as I'm concerned, among the best books in math ever written....if you are a mathematician and want to have the top reference in probability, this is it." (Amazon.com, January 2006) A complete and comprehensive classic in probability and measure theory Probability and Measure, Anniversary Edition by Patrick Billingsley celebrates the achievements and advancements that have made this book a classic in its field for the past 35 years. Now re-issued in a new style and format, but with the reliable content that the third edition was revered for, this

  11. Skin Temperature Measurement

    OpenAIRE

    Sarjoghian, Siamak

    2017-01-01

    This report represents the design and implementation of a skin temperature measurement system. The system aims to measure the skin temperature from a sensor and send it to the PC using a USB cable to display on screen. The data needs to be updated every second. The PIC18F4550 microcontroller has been used in this project to obtain data from the sensor and send it to the PC using USB 2.0 that has been built into the microcontroller. The microcontroller has a 10-bit Analog Digital Converting ac...

  12. Polarizability Measurements at MAMI

    Science.gov (United States)

    Hornidge, David; A2 Collaboration at MAMI Collaboration

    2017-01-01

    A central problem of modern physics research is the solution to QCD in the non-perturbative regime. One method of testing QCD in this low-energy region is by measuring certain structure constants of hadrons-called polarizabilities-that show particular promise of allowing a direct connection to the underlying quark/gluon dynamics through comparison to modern QCD-inspired model calculations, and to solutions of QCD done computationally on the lattice. This talk will give an overview of recent and upcoming measurements to obtain the polarizabilities of both the proton and neutron.

  13. Which firms use measures?

    DEFF Research Database (Denmark)

    Pedersen, Esben Rahbek Gjerdrum; Sudzina, Frantisek

    2012-01-01

    measurement practices. Design/methodology/approach – This paper hypothesises that firms dominated by organic capabilities and operating in unpredictable markets are more likely to adopt comprehensive PM systems. The statistical test of these hypotheses is based on a 2008 survey of 299 Danish firms. Findings....... Originality/value – Much has been said about how changes in the environment and business structure require firms to develop new ways to measure performance. Less has been done to study whether firms adopting comprehensive PM systems actually match the characteristics of the “new economy”. The findings from...

  14. The measurement of happiness.

    Science.gov (United States)

    Helm, D T

    2000-09-01

    Happiness has been defined either as a broad notion of how one feels about their life in general or as an emotional or affective state. Depending on the way researchers define the concept, there have been variable attempts at measurement. With decades of research, we have a better understanding of how to measure the happiness of others. A combination of quantitative and qualitative methods appears to be most productive. If we assume that individuals with disabilities are made happy in the same way as are people without disabilities, then we have a good idea of how to proceed with practical and policy matters.

  15. Measuring Firm Performance

    DEFF Research Database (Denmark)

    Assaf, A. George; Josiassen, Alexander; Gillen, David

    2014-01-01

    Set in the airport industry, this paper measures firm performance using both desirable and bad outputs (i.e. airport delays). We first estimate a model that does not include the bad outputs and then a model that includes bad outputs. The results show important differences in the efficiency...... and productivity results depending on whether bad outputs are or are not included in the model. The differences reflect the resource cost to society and the potential cost to an airport if such externalities were internalized. Finally, the paper provides measures of shadow prices for the bad output, in our case...

  16. Measuring Idiosyncratic Risk

    DEFF Research Database (Denmark)

    Sunesen, Eva Rytter

    This paper offers two refinements of the traditional risk measure based on the volatility of growth. First, we condition GDP growth on structural characteristics of the host country that move only slowly and therefore can be partly predicted by an investor. Second, we adjust conditional risk for ...

  17. Measure Guideline: Ventilation Cooling

    Energy Technology Data Exchange (ETDEWEB)

    Springer, D.; Dakin, B.; German, A.

    2012-04-01

    The purpose of this measure guideline on ventilation cooling is to provide information on a cost-effective solution for reducing cooling system energy and demand in homes located in hot-dry and cold-dry climates. This guideline provides a prescriptive approach that outlines qualification criteria, selection considerations, and design and installation procedures.

  18. Measure Guideline: Ventilation Cooling

    Energy Technology Data Exchange (ETDEWEB)

    Springer, D. [Alliance for Residential Building Innovation (ARBI), David, CA (United States); Dakin, B. [Alliance for Residential Building Innovation (ARBI), David, CA (United States); German, A. [Alliance for Residential Building Innovation (ARBI), David, CA (United States)

    2012-04-01

    The purpose of this measure guideline is to provide information on a cost-effective solution for reducing cooling system energy and demand in homes located in hot-dry and cold-dry climates. This guideline provides a prescriptive approach that outlines qualification criteria, selection considerations, and design and installation procedures.

  19. Nuclear Enterprise Performance Measurement

    Science.gov (United States)

    2011-03-01

    Figure 2-1 Balanced scorecard model ............................................................................11 Figure 2-2 Analytic Hierarchy...outcomes for each organization. Perhaps the most well-known performance measurement framework method is The Balanced Scorecard . The Balanced ...perspective)? 11 Figure 2-1. Balanced scorecard model. The Balanced Scorecard has evolved since its initial rise to popularity. It focuses less on

  20. Recognition measured values

    OpenAIRE

    LEITKEP, Zdeněk

    2012-01-01

    This work deals recognition measured values. The main task is to find suitable method for preprocessing images and create interface to software performing recognition. Created application will be used primarily to analyze the photos on site acquisition. Application is developed in Java and properly documented on javadoc level.

  1. Measuring Cultural Diversity

    DEFF Research Database (Denmark)

    Patsiurko, Natalka; Campbell, John L.; Hall, John A.

    2012-01-01

    Many claim that national economic success depends upon cultural homogeneity. We collect new time-series data and develop new measures of ethnic, linguistic and religious fractionalization for the OECD countries. We show that cultural diversity may vary by type across countries and over short...

  2. Noise-Measuring Method

    DEFF Research Database (Denmark)

    Diamond, J. M.

    1965-01-01

    A noise-measuring method based on the use of a calibrated noise generator and an output meter with a special scale is described. The method eliminates the effect of noise contributions occurring in the circuits following the device under test....

  3. ALMA measures Calama earthquake

    Science.gov (United States)

    Brito, R.; Shillue, B.

    2010-04-01

    On 4 March 2010, the ALMA system response to an extraordinarily large disturbance was measured when a magnitude 6.3 earthquake struck near Calama, Chile, relatively close to the ALMA site. Figures 1 through 4 demonstrate the remarkable performance of the ALMA system to a huge disturbance that was more than 100 times the specification for correction accuracy.

  4. Measures for speed management.

    NARCIS (Netherlands)

    2009-01-01

    Measures for speed management are essential for limiting the negative effects of driving too fast and at inappropriate speeds. To begin with, safe and credible speed limits need to be determined. Dynamic and variable speed limits that take into account the current circumstances, such as weather cond

  5. The Measurable Me

    DEFF Research Database (Denmark)

    Sjöklint, Mimmi

    2014-01-01

    and mobile apps. On the other hand, the user may actively and knowingly be gathering quantified data through ubiquitous sensory devices, such as wearable technology, e.g. the Jawbone UP and Fitbit. In both instances, the user is exposed to versions of self-quantified measures, namely the aggregation...

  6. Measuring urban form

    NARCIS (Netherlands)

    Berghauser Pont, M.Y.

    2011-01-01

    For many, the notion of ‘measuring urban form’ will sound disturbing. Urban form is about visual images of cities, experiences, feelings, memories of place, thoughts and intellectual constructs anchored in the realm of the arts and the humanities. Anne Vernez Moudon however gives in the paper Urbani

  7. Color measurement and discrimination

    Science.gov (United States)

    Wandell, B. A.

    1985-01-01

    Theories of color measurement attempt to provide a quantative means for predicting whether two lights will be discriminable to an average observer. All color measurement theories can be characterized as follows: suppose lights a and b evoke responses from three color channels characterized as vectors, v(a) and v(b); the vector difference v(a) - v(b) corresponds to a set of channel responses that would be generated by some real light, call it *. According to theory a and b will be discriminable when * is detectable. A detailed development and test of the classic color measurement approach are reported. In the absence of a luminance component in the test stimuli, a and b, the theory holds well. In the presence of a luminance component, the theory is clearly false. When a luminance component is present discrimination judgements depend largely on whether the lights being discriminated fall in separate, categorical regions of color space. The results suggest that sensory estimation of surface color uses different methods, and the choice of method depends upon properties of the image. When there is significant luminance variation a categorical method is used, while in the absence of significant luminance variation judgments are continuous and consistant with the measurement approach.

  8. Measuring Systemic Risk

    DEFF Research Database (Denmark)

    Acharya, Viral V.; Heje Pedersen, Lasse; Philippon, Thomas

    We present a simple model of systemic risk and we show that each financial institution's contribution to systemic risk can be measured as its systemic expected shortfall (SES), i.e., its propensity to be undercapitalized when the system as a whole is undercapitalized. SES increases...

  9. Precision measurements in supersymmetry

    Energy Technology Data Exchange (ETDEWEB)

    Feng, Johnathan Lee [Stanford Univ., CA (United States)

    1995-05-01

    Supersymmetry is a promising framework in which to explore extensions of the standard model. If candidates for supersymmetric particles are found, precision measurements of their properties will then be of paramount importance. The prospects for such measurements and their implications are the subject of this thesis. If charginos are produced at the LEP II collider, they are likely to be one of the few available supersymmetric signals for many years. The author considers the possibility of determining fundamental supersymmetry parameters in such a scenario. The study is complicated by the dependence of observables on a large number of these parameters. He proposes a straightforward procedure for disentangling these dependences and demonstrate its effectiveness by presenting a number of case studies at representative points in parameter space. In addition to determining the properties of supersymmetric particles, precision measurements may also be used to establish that newly-discovered particles are, in fact, supersymmetric. Supersymmetry predicts quantitative relations among the couplings and masses of superparticles. The author discusses tests of such relations at a future e{sup +}e{sup {minus}} linear collider, using measurements that exploit the availability of polarizable beams. Stringent tests of supersymmetry from chargino production are demonstrated in two representative cases, and fermion and neutralino processes are also discussed.

  10. Measuring Kinetic Plasma Eigenmodes

    Science.gov (United States)

    Mattingly, Sean; Berumen, Jorge; Chu, Feng; Hood, Ryan; Skiff, Fred

    2015-11-01

    We present a method for measuring kinetic plasma eigenmodes of a cylindrical axially magnetized (1 kG) laboratory plasma (n ~109cm-3 , Te ~ 5eV , Ti ~ 0 . 06eV) by measuring velocity space correlation functions. This method simultaneously observes two separate laser induced fluorescence schemes. Each scheme has its own indepedently tunable laser and its own set of collection optics. With this setup, we are able to measure the time - averaged correlation function as a function of position on the cylindrical axis parallel to the magnetic field (z) and velocity on the deconvolved ion velocity distribution function (v) : C (z , v ,z' ,v' , τ) = t. The freedom of two lasers allows us to measure a two dimensional velocity correlation matrix. This matrix is investigated with the Vlasov equation in the collisionless and weakly collisional regime. The former case, which is continuous, is diagonalized with an integral transform defined by P. J. Morrison while the latter case, which is discrete, is diagonalized through the use of Hermite polynomials.

  11. Customer satisfaction measurement

    Directory of Open Access Journals (Sweden)

    Maričić Branko R.

    2012-01-01

    Full Text Available Customer satisfaction is important in business management as a basis for long-term profitability of a single line of products and services and the company as a whole. Customer satisfaction in modern market conditions is characterized by a large number of alternatives that can satisfy the same need or desire of consumers, and are a prerequisite for the retention, loyalty, and positive verbal communication between companies and vendors on one hand and consumers on the other. Companies are investing more and more investment and management efforts in improving customer satisfaction. Improving customer satisfaction and its measurement involves the taking of appropriate marketing strategies and tactics, as well as corrective measures. This paper presents the well-known attempts to measure customers' satisfaction at the macro and micro level of marketing analysis. The index of consumer satisfaction is an important indicator of achieved quality and market performance of companies and can be measured on a micro and macro level. National customer satisfaction indexes are useful framework for analyzing the competitiveness of national economies, industries and individual companies and are used for a variety of other aspects of observation and analysis. Standardization of consumer satisfaction indexes in different countries allows comparability of the data, giving a new quality of analysis in the era of globalization and internationalization of business.

  12. Inclusion : Conceptualization and measurement

    NARCIS (Netherlands)

    Jansen, Wiebren S.; Otten, Sabine; van der Zee, Karen I.; Jans, Lise

    In the present research, we introduced a conceptual framework of inclusion and subsequently used this as a starting point to develop and validate a scale to measure perceptions of inclusion. Departing from existing work on inclusion and complementing this with theoretical insights from optimal

  13. Inclusion: Conceptualization and measurement

    NARCIS (Netherlands)

    Jansen, W.S.; Otten, S.; Van der Zee, K.I.; Jans, L.

    2014-01-01

    n the present research, we introduced a conceptual framework of inclusion and subsequently used this as a starting point to develop and validate a scale to measure perceptions of inclusion. Departing from existing work on inclusion and complementing this with theoretical insights from optimal

  14. Inclusion: Conceptualization and measurement

    NARCIS (Netherlands)

    Jansens, Wiebren S.; Otten, Sabine; van der Zee, Karen; Jans, Lise

    2014-01-01

    In the present research, we introduced a conceptual framework of inclusion and subsequently used this as a starting point to develop and validate a scale to measure perceptions of inclusion. Departing from existing work on inclusion and complementing this with theoretical insights from optimal

  15. Metrology and measurement

    CERN Document Server

    Bewoor, Anand K

    2009-01-01

    Meant for students and practicing engineers, this book provides an integrated exposure to dimensional and mechanical measurement. It gives the reader a methodical and well thought-out presentation using concise explanations, flexible approach and real-life case studies from the industry.

  16. Measuring nurses' moral judgments.

    Science.gov (United States)

    Parker, R S

    1990-01-01

    Studies of the moral reasoning of nurses yield inconsistent findings. Using Cronbach and Meehl's interpretive framework, the author demonstrates the lack of construct validity for Kohlberg's theory of moral development and related measures of moral reasoning. Gilligan's relational theory of moral orientations is proposed as an alternative theory worth testing in nurse samples.

  17. First Measurement of $\

    Energy Technology Data Exchange (ETDEWEB)

    Palomino Gallo, Jose Luis [Centro Brasileiro de Pesquisas Fisicas (CBPF), Rio de Janeiro (Brazil)

    2012-12-01

    Understanding of the $\\pi^0$ production via anti-neutrino-nucleus charged current interaction in the neutrino energy region of 1-10 GeV is essential for neutrino oscillation experiments. In this thesis, we present a measurement of charged current $\\pi^0$ production from anti-muon neutrinos scattering on a polystyrene scintillator (CH) target in the MINER$\

  18. Graphs Generated by Measures

    Directory of Open Access Journals (Sweden)

    A. Assari

    2016-01-01

    Full Text Available In this paper, a graph is assigned to any probability measure on the σ-algebra of Borel sets of a topological space. Using this construction, it is proved that given any number n (finite or infinite there exists a nonregular graph such that its clique, chromatic, and dominating number equals n.

  19. Measuring Intergenerational Obligations

    Science.gov (United States)

    Ganong, Lawrence; Coleman, Marilyn

    2005-01-01

    Researchers have defined intergenerational obligations in diverse ways, and they have used many labels and ways of measuring intergenerational obligations. Using vignettes, we compared responses to questions about what family members should do when another family member needed assistance ("normative obligations") with responses to questions about…

  20. Measuring Growth in English.

    Science.gov (United States)

    Diederich, Paul B.

    The monograph is a complete outline for a program designed to help English departments institute logical and fair procedures for grading student essays. The contents in this monograph include "Factors in Judgments of Writing Ability,""The Effect of Bias,""Measuring Improvement in Writing,""Personal vs Staff Grading,""Standard Scores for Test…

  1. Measuring what's missing

    DEFF Research Database (Denmark)

    Jones, Edward Samuel

    2016-01-01

    Stochastic sensitivity analyses rarely measure the extent to which realized simulations cover the search space. Rather, simulation lengths are typically chosen according to expert judgement. In response, this paper recommends a novel application of Good-Turing estimators of missing distributional...

  2. Measuring Educational Sustainability

    Science.gov (United States)

    Selvanathan, Rani G.

    2013-01-01

    There are many definitions that are attributable to the meaning of sustainability. Sustainability can be viewed as long-lasting, effective result of a project, venture, action, or investment without consuming additional future resources. Because of the wide nature of its applicability, a universal measure of sustainability is hard to come by. This…

  3. MEASUREMENT OF WHEAT DENSITY

    Institute of Scientific and Technical Information of China (English)

    冯跟胜; 党金春; 等

    1995-01-01

    A method used for on line determining the change of wheat density with a automatic watering machine in a lqarge flour mill has been studied.The results show that the higher distinguishing ability is obtained when using 241Am as a γ-ray source for measuring the wheat density than using 137Cs.

  4. Measurement of nonsulfated cholecystokinins

    DEFF Research Database (Denmark)

    Agersnap, Mikkel; Rehfeld, Jens F

    2014-01-01

    at a defined processing site in proCCK (R₇₅-D₇₆) followed by monospecific RIA-measurement of the then exposed nonsulfated N-terminal sequence of CCK-8 (DYMGW…). The analysis shows that endocrine cells in the gut synthesize nonsulfated CCK peptides (-58, -33, -22, and -8) in the order of 20...

  5. Measure Guideline: Evaporative Condensers

    Energy Technology Data Exchange (ETDEWEB)

    German, A [Alliance for Residential Building Innovation (ARBI), Davis, CA (United States); Dakin, B. [Alliance for Residential Building Innovation (ARBI), Davis, CA (United States); Hoeschele, M. [Alliance for Residential Building Innovation (ARBI), Davis, CA (United States)

    2012-03-01

    This measure guideline on evaporative condensers provides information on properly designing, installing, and maintaining evaporative condenser systems as well as understanding the benefits, costs, and tradeoffs. This is a prescriptive approach that outlines selection criteria, design and installation procedures, and operation and maintenance best practices.

  6. AA magnet measurement team

    CERN Multimedia

    1978-01-01

    Quickly improvised measurement equipment for the AA (Antiproton Accumulator) was all the tight schedule permitted, but the high motivation of the team made up for the lack of convenience. From left to right: Roy Billinge (Joint AA Project Leader, the other one was Simon van der Meer); Bruno Autin, Brian Pincott, Colin Johnson.

  7. Measuring Intergenerational Obligations

    Science.gov (United States)

    Ganong, Lawrence; Coleman, Marilyn

    2005-01-01

    Researchers have defined intergenerational obligations in diverse ways, and they have used many labels and ways of measuring intergenerational obligations. Using vignettes, we compared responses to questions about what family members should do when another family member needed assistance ("normative obligations") with responses to questions about…

  8. Inclusion: Conceptualization and measurement

    NARCIS (Netherlands)

    Jansens, Wiebren S.; Otten, Sabine; Zee, van der Karen I.; Jans, Lise

    2014-01-01

    In the present research, we introduced a conceptual framework of inclusion and subsequently used this as a starting point to develop and validate a scale to measure perceptions of inclusion. Departing from existing work on inclusion and complementing this with theoretical insights from optimal disti

  9. Inclusion: Conceptualization and measurement

    NARCIS (Netherlands)

    Jansen, W.S.; Otten, S.; Van der Zee, K.I.; Jans, L.

    2014-01-01

    n the present research, we introduced a conceptual framework of inclusion and subsequently used this as a starting point to develop and validate a scale to measure perceptions of inclusion. Departing from existing work on inclusion and complementing this with theoretical insights from optimal distin

  10. Inclusion : Conceptualization and measurement

    NARCIS (Netherlands)

    Jansen, Wiebren S.; Otten, Sabine; van der Zee, Karen I.; Jans, Lise

    2014-01-01

    In the present research, we introduced a conceptual framework of inclusion and subsequently used this as a starting point to develop and validate a scale to measure perceptions of inclusion. Departing from existing work on inclusion and complementing this with theoretical insights from optimal disti

  11. Measurements for municipalities 2010

    NARCIS (Netherlands)

    Bob Kuhry; Jedid-Jah Jonker; Ab van der Torre

    2010-01-01

    Original title: Maten voor gemeenten 2010 This 2010 edition of Measurements for municipalities presents an impression of the performance delivered by Dutch local authorities and of the associated costs. The analyses in the report relate to the period 2003-2008. This is the eighth year in succession

  12. Can colour be measured?

    DEFF Research Database (Denmark)

    Ramanujam, P.S.

    Colour is a sensation. While wavelength can be measured with a spectrometer consisting of dispersive elements and colour insensitive detectors, detection of colour is accomplished by the eye, equipped with a lens, colour sensitive detectors, and a powerful processor in the form of brain. Sometimes...

  13. Refractive index based measurements

    DEFF Research Database (Denmark)

    2014-01-01

    In a method for performing a refractive index based measurement of a property of a fluid such as chemical composition or temperature, a chirp in the local spatial frequency of interference fringes of an interference pattern is reduced by mathematical manipulation of the recorded light intensity...

  14. Diamond Measuring Machine

    Energy Technology Data Exchange (ETDEWEB)

    Krstulic, J.F.

    2000-01-27

    The fundamental goal of this project was to develop additional capabilities to the diamond measuring prototype, work out technical difficulties associated with the original device, and perform automated measurements which are accurate and repeatable. For this project, FM and T was responsible for the overall system design, edge extraction, and defect extraction and identification. AccuGem provided a lab and computer equipment in Lawrence, 3D modeling, industry expertise, and sets of diamonds for testing. The system executive software which controls stone positioning, lighting, focusing, report generation, and data acquisition was written in Microsoft Visual Basic 6, while data analysis and modeling were compiled in C/C++ DLLs. All scanning parameters and extracted data are stored in a central database and available for automated analysis and reporting. The Phase 1 study showed that data can be extracted and measured from diamond scans, but most of the information had to be manually extracted. In this Phase 2 project, all data required for geometric modeling and defect identification were automatically extracted and passed to a 3D modeling module for analysis. Algorithms were developed which automatically adjusted both light levels and stone focus positioning for each diamond-under-test. After a diamond is analyzed and measurements are completed, a report is printed for the customer which shows carat weight, summarizes stone geometry information, lists defects and their size, displays a picture of the diamond, and shows a plot of defects on a top view drawing of the stone. Initial emphasis of defect extraction was on identification of feathers, pinpoints, and crystals. Defects were plotted color-coded by industry standards for inclusions (red), blemishes (green), and unknown defects (blue). Diamonds with a wide variety of cut quality, size, and number of defects were tested in the machine. Edge extraction, defect extraction, and modeling code were tested for

  15. EDITORIAL: Microwave Moisture Measurements

    Science.gov (United States)

    Kaatze, Udo; Kupfer, Klaus; Hübner, Christof

    2007-04-01

    Microwave moisture measurements refer to a methodology by which the water content of materials is non-invasively determined using electromagnetic fields of radio and microwave frequencies. Being the omnipresent liquid on our planet, water occurs as a component in most materials and often exercises a significant influence on their properties. Precise measurements of the water content are thus extremely useful in pure sciences, particularly in biochemistry and biophysics. They are likewise important in many agricultural, technical and industrial fields. Applications are broad and diverse, and include the quality assessment of foodstuffs, the determination of water content in paper, cardboard and textile production, the monitoring of moisture in sands, gravels, soils and constructions, as well as the measurement of water admixtures to coal and crude oil in reservoirs and in pipelines. Microwave moisture measurements and evaluations require insights in various disciplines, such as materials science, dielectrics, the physical chemistry of water, electrodynamics and microwave techniques. The cooperation of experts from the different fields of science is thus necessary for the efficient development of this complex discipline. In order to advance cooperation the Workshop on Electromagnetic Wave Interaction with Water and Moist Substances was held in 1993 in Atlanta. It initiated a series of international conferences, of which the last one was held in 2005 in Weimar. The meeting brought together 130 scientists and engineers from all over the world. This special issue presents a collection of some selected papers that were given at the event. The papers cover most topics of the conference, featuring dielectric properties of aqueous materials, electromagnetic wave interactions, measurement methods and sensors, and various applications. The special issue is dedicated to Dr Andrzej W Kraszewski, who died in July 2006 after a distinguished career of 48 years in the research of

  16. Simulating positive-operator-valued measures with projective measurements

    OpenAIRE

    Oszmaniec, Michał; Guerini, Leonardo; Wittek, Peter; Acín, Antonio

    2016-01-01

    Standard projective measurements represent a subset of all possible measurements in quantum physics, defined by positive-operator-valued measures. We study what quantum measurements are projective simulable, that is, can be simulated by using projective measurements and classical randomness. We first prove that every measurement on a given quantum system can be realised by classical processing of projective measurements on the system plus an ancilla of the same dimension. Then, given a genera...

  17. Performance Measurement at Universities

    DEFF Research Database (Denmark)

    Lueg, Klarissa

    2014-01-01

    This paper proposes empirical approaches to testing the reliability, validity, and organizational effectiveness of student evaluations of teaching (SET) as a performance measurement instrument in knowledge management at the institutional level of universities. Departing from Weber’s concept...... of bureaucracy and critical responses to this concept, we discuss how contemporary SET are used as an instrument of organizational control at Danish universities. A discussion of the current state of performance measurement within the frame of new public management (NPM) and its impact on knowledge creation......, it can be investigated if SET actually contribute to teaching improvement by examining how the instrument is integrated into systematic ex-ante and ex-post organizational management. It is expected to find discrepancy between the proponents’ intent to evaluate teaching and the way the performance...

  18. Measurement of heme concentration.

    Science.gov (United States)

    Sinclair, P R; Gorman, N; Jacobs, J M

    2001-05-01

    Heme (iron protoporphyrin IX) is a prosthetic group for a number of hemoproteins in different tissues (e.g., hemoglobin, myoglobin, cytochrome P-450s, mitochondrial cytochromes, catalases, and peroxidases). Mutations in the biosynthetic pathway can affect the synthesis and/or degradation of heme. Several assays are provided in this unit for quantifying heme: a spectrophotometric assay based on the characteristic absorption spectrum of oxidized and reduced form of the hemochrome formed by replacing the nitrogen ligands with pyridine; a fluorescence assay based on removal of the iron by a heated, strong oxalic acid solution to produce fluorescent protoporphyrin; a reversed-phase HPLC assay to measure heme and intermediates in the synthetic pathway; and a radiometric assay to measure newly synthesized heme in tissue culture cells.

  19. External Measures of Cognition

    Directory of Open Access Journals (Sweden)

    Osvaldo eCairo

    2011-10-01

    Full Text Available The human brain is undoubtedly the most impressive, complex and intricate organ that has evolved over time. It is also probably the least understood, and for that reason, the one that is currently attracting the most attention. In fact, the number of comparative analyses that focus on the evolution of brain size in Homo sapiens and other species has increased dramatically in recent years. In neuroscience, no other issue has generated so much interest and been the topic of so many heated debates as the difference in brain size between socially defined population groups, both its connotations and implications. For over a century, external measures of cognition have been related to intelligence. However, it is still unclear whether these measures actually correspond to cognitive abilities. In summary, this paper must be reviewed with this premise in mind.

  20. Measuring children's food preferences

    DEFF Research Database (Denmark)

    Olsen, Annemarie; Kildegaard, Heidi; Gabrielsen, Gorm

    2012-01-01

    The aim of this study is to investigate if children’s food preferences can be reliable measured by using pictures of foods presented on a computer screen in a conjoint layout.We investigate reproducibility (test–retest) and infer validity by comparison with traditional hedonic evaluations...... juices (tangible products), chosen to span the preference spectrum, were hedonically evaluated for appearance and taste. Finally, an actual product choice was performed by having the children choose between two buns and two juices.Results showed that the computer evaluationswith pictures of foods...... provided reproducible information about the children’s visual food preferences, which were in concordance with both hedonic measures and products choices, and can thus be considered valid....

  1. Measures in Mutlifield Inflation

    CERN Document Server

    Grumitt, Richard

    2016-01-01

    We examine the classical dynamics of multifield inflation models with quadratic potentials. Such models are shown to have inflationary attractors in phase space, consistent with the stretching of phase space trajectories along the volume factor of the universe during inflation. Using the symplectic structure associated with Hamiltonian systems we form a measure on the phase space, as initially proposed by Gibbons, Hawking and Stewart. This is used to calculate lower bounds on the probabilities of observational agreement (i.e. the probability the model gives a value for the spectral index within the region $n_{s}=0.968\\pm{0.006}$) for equal mass two and three field models with quadratic potentials, giving values of 0.982 and 0.997 respectively. We derive the measure for a general $N$-field model and argue that as the number of fields approaches infinity, the probability of observational agreement approaches one.

  2. Measuring preschoolers' superstitious tendencies.

    Science.gov (United States)

    Sheehan, Kelly J; Van Reet, Jennifer; Bloom, Christopher M

    2012-10-01

    Superstitious behaviors have been studied extensively in adults and non-human species, but have not been systematically assessed in children. The purpose of the study is to develop and validate a method of measuring superstitious tendencies in young children based on an established learning paradigm. In two studies, 3-5-year-olds tapped a computer to make a target image appear. On half the trials, a sensory stimulus appeared at a random time before the target. Superstitious tendencies were measured by change in tapping during the presence of the sensory stimulus. Children's proportion of tapping increased during the presence of the sensory stimulus, indicating that children associated the sensory stimulus with the appearance of the target image, even though the two stimuli were not causally related. Implications for the development of superstitious tendencies and children's causal knowledge are discussed. Copyright © 2012 Elsevier B.V. All rights reserved.

  3. Measuring green jobs?

    DEFF Research Database (Denmark)

    Zandersen, Marianne; Martinsen, Louise

    2012-01-01

    The report reviews the different initiatives aiming to measure aspects of “green” sectors, jobs and technologies. The report discusses whether the statistics collected under the present initiatives aimed at measuring these aspects increase insights into the fundamental questions motivating...... the initiatives. An alternative framework is suggested, as it appears fundamentally impossible to make consistent frameworks for a division of the economy into “green” and “non-green” activities. The analysis has been carried out during the period September 2011 – March 2012 by Vista Analysis AS, Gaia Consulting...... Oy and University of Aarhus. The project was commissioned by the Working Group on Environment and Economy under the Nordic Council of Ministers....

  4. Measuring Systemic Risk

    DEFF Research Database (Denmark)

    Acharya, Viral V.; Heje Pedersen, Lasse; Philippon, Thomas

    2017-01-01

    We present an economic model of systemic risk in which undercapitalization of the financial sector as a whole is assumed to harm the real economy, leading to a systemic risk externality. Each financial institution’s contribution to systemic risk can be measured as its systemic expected shortfall...... of components of SES to predict emerging systemic risk during the financial crisis of 2007–2009....

  5. Measurement and monitoring

    CERN Document Server

    Giniotis, Vytautas

    2014-01-01

    This book presents the main methods and techniques for measuringand monitoring the accuracy of geometrical parameters of precisionComputer Numerically Controlled (CNC) and automated machines,including modern coordinate measuring machines (CMMs). Highlightsinclude: Standard methods and means of testing, together with methodsnewly developed and tested by the authors; Various parameters, such as straightness, perpendicularity, flatness,pitch, yaw, and roll, as well as the principal processes for measurementof these parameters; Lists and tables of geometrical accuracy parameters, together withdiag

  6. Can We Measure Memes?

    OpenAIRE

    Adam eMcNamara

    2011-01-01

    Memes are the fundamental unit of cultural evolution and have been left upon the periphery of cognitive neuroscience due to their inexact definition and the consequent presumption that they are impossible to measure. Here it is argued that although a precise definition of memes is rather difficult it does not preclude highly controlled experiments studying the neural substrates of their initiation and replication. In this paper, memes are termed as either internally or externally represented ...

  7. Measuring the Managerial Potential

    OpenAIRE

    Ion Gh. Rosca; George Moldoveanu

    2009-01-01

    The paper proposes the measurement of managerial and functional capabilities of the organization, as the dimensions of managerial potential, based on the configurative theory and not on the reductionist one. The components of the managerial potential are fulfilled by the capability of building organizational culture, managerial change and defining equity as the proximate type of social responsibility. The components are described in relation with the socio-economic model, useful in the proces...

  8. Measuring Lifetime Poverty

    OpenAIRE

    Michael Hoy; Buhong Zheng

    2008-01-01

    This paper presents an axiomatic framework for measuring life time poverty over multiple periods. For an individual, we argue that lifetime poverty is influenced by both the snapshot poverty of each period and the poverty level of the "permanent" lifetime consumption; it is also influenced by how poverty spells are distributed over the life time. Two obvious candidates for aggregation are to aggregate over time and then across individuals, or vice versa. For a society, we consider a path-inde...

  9. Measurement of the $\

    CERN Document Server

    Nowak, Jaroslaw A

    2009-01-01

    Using high statistics samples of charged current interactions, MiniBooNE reports a model independent measurement of the single charged pion production to quasi-elastic cross section ratio on mineral oil without corrections for pion re-interactions in the target nucleus. The result is provided as a function of neutrino energy in the range 0.4 GeV < E < 2.4 GeV with 11% precision in the region of highest statistics.

  10. Measuring Voter Lines

    DEFF Research Database (Denmark)

    Schürmann, Carsten; Wang, Jian

    2016-01-01

    We present an automated data collection technique called white boxes-or simply wb-technique, which is designed to analyze the voter behavior in polling stations including the measurement of arrival and waiting times and the determination of arrival frequency, to assist the management of polling...... places to make decisions regarding the distribution of resources and to identify areas for future improvement, and to provide hard data to guide the political decision making process with respect to the choice of voting technologies....

  11. CCN Spectral Measurements

    Energy Technology Data Exchange (ETDEWEB)

    Hudson, James G.

    2009-02-27

    Detailed aircraft measurements were made of cloud condensation nuclei (CCN) spectra associated with extensive cloud systems off the central California coast in the July 2005 MASE project. These measurements include the wide supersaturation (S) range (2-0.01%) that is important for these polluted stratus clouds. Concentrations were usually characteristic of continental/anthropogenic air masses. The most notable feature was the consistently higher concentrations above the clouds than below. CCN measurements are so important because they provide a link between atmospheric chemistry and cloud-climate effects, which are the largest climate uncertainty. Extensive comparisons throughout the eleven flights between two CCN spectrometers operated at different but overlapping S ranges displayed the precision and accuracy of these difficult spectral determinations. There are enough channels of resolution in these instruments to provide differential spectra, which produce more rigorous and precise comparisons than traditional cumulative presentations of CCN concentrations. Differential spectra are also more revealing than cumulative spectra. Only one of the eleven flights exhibited typical maritime concentrations. Average below cloud concentrations over the two hours furthest from the coast for the 8 flights with low polluted stratus was 614?233 at 1% S, 149?60 at 0.1% S and 57?33 at 0.04% S cm-3. Immediately above cloud average concentrations were respectively 74%, 55%, and 18% higher. Concentration variability among those 8 flights was a factor of two. Variability within each flight excluding distances close to the coast ranged from 15-56% at 1% S. However, CN and probably CCN concentrations sometimes varied by less than 1% over distances of more than a km. Volatility and size-critical S measurements indicated that the air masses were very polluted throughout MASE. The aerosol above the clouds was more polluted than the below cloud aerosol. These high CCN concentrations from

  12. Centrality Measures in Networks

    CERN Document Server

    Bloch, Francis; Tebaldi, Pietro

    2016-01-01

    We show that although the prominent centrality measures in network analysis make use of different information about nodes' positions, they all process that information in an identical way: they all spring from a common family that are characterized by the same simple axioms. In particular, they are all based on a monotonic and additively separable treatment of a statistic that captures a node's position in the network.

  13. Centrifugal Contactor Efficiency Measurements

    Energy Technology Data Exchange (ETDEWEB)

    Mincher, Bruce Jay [Idaho National Lab. (INL), Idaho Falls, ID (United States); Tillotson, Richard Dean [Idaho National Lab. (INL), Idaho Falls, ID (United States); Grimes, Travis Shane [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2017-01-01

    The contactor efficiency of a 2-cm acrylic centrifugal contactor, fabricated by ANL using 3D printer technology was measured by comparing a contactor test run to 5-min batch contacts. The aqueous phase was ~ 3 ppm depleted uranium in 3 M HNO3, and the organic phase was 1 M DAAP/dodecane. Sampling during the contactor run showed that equilibrium was achieved within < 3 minutes. The contactor efficiency at equilibrium was 95% to 100 %, depending on flowrate.

  14. Mass Customization Measurements Metrics

    DEFF Research Database (Denmark)

    Nielsen, Kjeld; Brunø, Thomas Ditlev; Jørgensen, Kaj Asbjørn

    2014-01-01

    A recent survey has indicated that 17 % of companies have ceased mass customizing less than 1 year after initiating the effort. This paper presents measurement for a company’s mass customization performance, utilizing metrics within the three fundamental capabilities: robust process design, choice...... navigation, and solution space development. A mass customizer when assessing performance with these metrics can identify within which areas improvement would increase competitiveness the most and enable more efficient transition to mass customization....

  15. Measurement Space Drill Support

    Science.gov (United States)

    2015-08-30

    address the conditions: Go to coffee shop , buy a car hot water/ coffee maker, coffee cup, thermos. Conditions that discriminate among those...Insulated coffee mug. – Thermos. – Coffee shop . Attributes Operational Impact Measures Conditions Environment Mission Threat Friendly Echelon Time...a boat. All possible solutions: coffee mug, thermos, buy coffee , not go to work, buy a portable coffee pot, get a closer job, drink water, duct

  16. Radioactivity and its measurement

    CERN Document Server

    Mann, W B; Garfinkel, S B

    1980-01-01

    Begins with a description of the discovery of radioactivity and the historic research of such pioneers as the Curies and Rutherford. After a discussion of the interactions of &agr;, &bgr; and &ggr; rays with matter, the energetics of the different modes of nuclear disintegration are considered in relation to the Einstein mass-energy relationship as applied to radioactive transformations. Radiation detectors and radioactivity measurements are also discussed

  17. Detailing 'measures that matter'.

    Science.gov (United States)

    Heavisides, Bob

    2010-04-01

    In a paper originally presented at last October's Healthcare Estates conference in Harrogate, Bob Heavisides, director of facilities at the Milton Keynes NHS Foundation Trust, explains how estates and facilities directors can provide a package of information based on a number of "measures that matter" to demonstrate to their boards that safe systems of work, operational efficiency and effectiveness, and operational parameters, are within, or better than, equivalent-sized Trusts.

  18. PIV Measurements in Pumps

    Science.gov (United States)

    2006-11-01

    8. Fachtagung, 12.-14. Sept. 2000, Freising/ Weihenstephan. [5] Chow, Y., Katz , J., Uzol, O., Meneveau, Ch. (2002): An Investigation of Axial...Skovlunde, Denmark. [7] Dantec Measurement Technology A/S (2002): FlowMap. 3D-PIV System. 5th ed., 2002 Skovlunde, Denmark. [8] Friedrichs , J...Laser-two-focus velocimetry. AGARD-CP-399, paper 7. [17] Uzol, O., Chow, Y.-C., Katz , J., Meneveau, C. (2002): Unobstracted particle image velocimetry

  19. MEASUREMENT OF HEALTH INEQUALITY

    Directory of Open Access Journals (Sweden)

    NICOLETA CARAGEA

    2011-04-01

    Full Text Available Health inequality is met everywhere in the world, including in countries with a high level of economic development, or those with strong social protection systems. In this paper I analyzed certain methods to measure health inequalities between population groups and also I presented some empirical results regarding health disparities between European Union countries. My research is focussed on three health areas: health status of population, access to health care services and resource allocation and population spending on health care.

  20. Measure Guideline: Evaporative Condensers

    Energy Technology Data Exchange (ETDEWEB)

    German, A.; Dakin, B.; Hoeschele, M.

    2012-03-01

    The purpose of this measure guideline on evaporative condensers is to provide information on a cost-effective solution for energy and demand savings in homes with cooling loads. This is a prescriptive approach that outlines selection criteria, design and installation procedures, and operation and maintenance best practices. This document has been prepared to provide a process for properly designing, installing, and maintaining evaporative condenser systems as well as understanding the benefits, costs, and tradeoffs.

  1. Quantum correlations and measurements

    Energy Technology Data Exchange (ETDEWEB)

    Sperling, Jan

    2015-07-16

    The present thesis is a state of the art report on the characterization techniques and measurement strategies to verify quantum correlations. I mainly focus on research which has been performed in the theoretical quantum optics group at the University of Rostock during the last few years. The results include theoretical findings and analysis of experimental studies of radiation fields. We investigate the verification of quantum properties, the quantification of these quantum effects, and the characterization of quantum optical detector systems.

  2. Measuring Cyber Operations Effectiveness

    Science.gov (United States)

    2014-11-01

    using network scanners and frameworks like the SANS Critical Security Controls. Finally, a network vulnerability penetration test can be performed to...effectiveness in network, defensive, and offensive operations is a difficult task. Measures may be static , automated, some combination of both or...by SANS identifies using port scanners as a way to verify the setup has been performed correctly and only needed ports and protocols are allowed

  3. Validation Measures in CMMI

    OpenAIRE

    Khraiwesh, Mahmoud

    2011-01-01

    Validation is one of the software engineering disciplines that help build quality into software. The major objective of software validation process is to determine that the software performs its intended functions correctly and provide information about its quality and reliability. This paper identifies general measures for the specific goals and its specific practices of Validation Process Area (PA) in Capability Maturity Model Integration (CMMI). CMMI is developed by Software Engineering In...

  4. Can we Measure Memes?

    OpenAIRE

    Adam eMcNamara

    2011-01-01

    Memes are the fundamental unit of cultural evolution and have been left upon the periphery of cognitive neuroscience due to their inexact definition and the consequent presumption that they are impossible to measure. Here it is argued that although a precise definition of memes is rather difficult it does not preclude highly controlled experiments studying the neural substrates of their initiation and replication. In this paper, memes are termed as either internally or externally represented ...

  5. Measuring information networks

    Indian Academy of Sciences (India)

    K Sneppen; A Trusina; M Rosvall

    2005-06-01

    Traffic and communication between different parts of a complex system are fundamental elements in maintaining its overall cooperativity. Because a complex system consists of many different parts, it matters where signals are transmitted. Thus signaling and traffic are in principle specific, with each message going from a unique sender to a specific recipient. In the current paper we review some measures of network topology that are related to its ability to direct specific communication.

  6. 10 CFR 74.45 - Measurements and measurement control.

    Science.gov (United States)

    2010-01-01

    ... measurement quality and to estimate measurement uncertainty values, the licensee shall: (1) Assign... determine significant contributors to the measurement uncertainties associated with inventory differences... 10 Energy 2 2010-01-01 2010-01-01 false Measurements and measurement control. 74.45 Section...

  7. Ultrasonic measurements and technologies

    CERN Document Server

    Kočiš, Štefan

    1996-01-01

    An impulse for writing this book has originated from the effort to sum­ marize and publicise the acquired results of a research team at the De­ partment of Automation of the Faculty of Electrical Engineering and In­ formatics, Slovak Technical University in Bratislava. The research team has been involved for a long time with control problems for machine production mechanisms and, in recent (approximately 15) years, its effort was aimed mostly at the control of electrical servosystems of robots. Within this scope, the members of the authors' staff solved the State Re­ search Task Ultrasonic sensing of the position of a robot hand, which was coordinated by the Institute of Technical Cybernetics of the Slovak Academy of Sciences in Bratislava. The problem was solved in a complex way, i.e. from a conceptual de­ sign of the measurement, through the measurement and evaluation sys­ tem, up to connection to the control system of a robot. Compensation of the atmospheric influence on the precision of measurement,...

  8. DMAH ozone measurement net

    Directory of Open Access Journals (Sweden)

    D. Pagès

    2006-01-01

    Full Text Available The complexity of the study of tropospheric ozone lies in the fact that it is a secondary pollutant. It is not emitted by a source, instead its concentration in the air depends on other compounds (especially the nitrogen oxides emitted by motor vehicles and the volatile organic compounds emitted by the industry and the vegetation and meteorological factors (especially solar radiation and temperature. The European legislation compells to make measurements of the tropospheric ozone due to its effects on people (fatigue, irritation of the mucous membranes, aggravation of asthma ... and on environment (decrease of the production of cereals, synergy with plagues .... The measuring net in Catalonia belongs to the Department of Environment and Housing (DMAH. It has a pyramidal structure and it allows a surveillance to notify in case of exceeding a certain threshold. From the registered data of last years it is shown that the number of incidences is related to meteorology. They are more frequent during afternoon and the behaviour of this pollutant is different according to the proximity of the point of measurement to the sources of its precursors.

  9. Marked metric measure spaces

    CERN Document Server

    Depperschmidt, Andrej; Pfaffelhuber, Peter

    2011-01-01

    A marked metric measure space (mmm-space) is a triple (X,r,mu), where (X,r) is a complete and separable metric space and mu is a probability measure on XxI for some Polish space I of possible marks. We study the space of all (equivalence classes of) marked metric measure spaces for some fixed I. It arises as state space in the construction of Markov processes which take values in random graphs, e.g. tree-valued dynamics describing randomly evolving genealogical structures in population models. We derive here the topological properties of the space of mmm-spaces needed to study convergence in distribution of random mmm-spaces. Extending the notion of the Gromov-weak topology introduced in (Greven, Pfaffelhuber and Winter, 2009), we define the marked Gromov-weak topology, which turns the set of mmm-spaces into a Polish space. We give a characterization of tightness for families of distributions of random mmm- spaces and identify a convergence determining algebra of functions, called polynomials.

  10. Handbook of mass measurement

    CERN Document Server

    Jones, Frank E

    2002-01-01

    "How much does it weigh?" seems a simple question. To scientists and engineers, however, the answer is far from simple, and determining the answer demands consideration of an almost overwhelming number of factors.With an intriguing blend of history, fundamentals, and technical details, the Handbook of Mass Measurement sets forth the details of achieving the highest precision in mass measurements. It covers the whole field, from the development, calibration, and maintenance of mass standards to detailed accounts of weighing designs, balances, and uncertainty. It addresses the entire measurement process and provides in-depth examinations of the various factors that introduce error.Much of the material is the authors'' own work and some of it is published here for the first time. Jones and Schoonover are both highly regarded veterans of the U.S. National Institute of Standards and Technology. With this handbook, they have provided a service and resource vital to anyone involved not only in the determination of m...

  11. Measuring visibility using smartphones

    Science.gov (United States)

    Friesen, Jan; Bialon, Raphael; Claßen, Christoph; Graffi, Kalman

    2017-04-01

    Spatial information on fog density is an important parameter for ecohydrological studies in cloud forests. The Dhofar cloud forest in Southern Oman exhibits a close interaction between the fog, trees, and rainfall. During the three month monsoon season the trees capture substantial amounts of horizontal precipitation from fog which increases net precipitation below the tree canopy. As fog density measurements are scarce, a smartphone app was designed to measure visibility. Different smartphone units use a variety of different parts. It is therefore important to assess the developed visibility measurement across a suite of different smartphones. In this study we tested five smartphones/ tablets (Google/ LG Nexus 5X, Huawei P8 lite, Huawei Y3, HTC Nexus 9, and Samsung Galaxy S4 mini) against digital camera (Sony DLSR-A900) and visual visibility observations. Visibility was assessed from photos using image entropy, from the number of visible targets, and from WiFi signal strength using RSSI. Results show clear relationships between object distance and fog density, yet a considerable spread across the different smartphone/ tablet units is evident.

  12. Measurement of lipolysis.

    Science.gov (United States)

    Schweiger, Martina; Eichmann, Thomas O; Taschler, Ulrike; Zimmermann, Robert; Zechner, Rudolf; Lass, Achim

    2014-01-01

    Lipolysis is defined as the hydrolytic cleavage of ester bonds in triglycerides (TGs), resulting in the generation of fatty acids (FAs) and glycerol. The two major TG pools in the body of vertebrates comprise intracellular TGs and plasma/nutritional TGs. Accordingly, this leads to the discrimination between intracellular and intravascular/gastrointestinal lipolysis, respectively. This chapter focuses exclusively on intracellular lipolysis, referred to as lipolysis herein. The lipolytic cleavage of TGs occurs in essentially all cells and tissues of the body. In all of them, the resulting FAs are utilized endogenously for energy production or biosynthetic pathways with one exception, white adipose tissue (WAT). WAT releases FAs and glycerol to supply nonadipose tissues at times of nutrient deprivation. The fundamental role of lipolysis in lipid and energy homeostasis requires the accurate measurement of lipase activities and lipolytic rates. The recent discovery of new enzymes and regulators that mediate the hydrolysis of TG has made these measurements more complex. Here, we describe detailed methodology for how to measure lipolysis and specific enzymes' activities in cells, organs, and their respective extracts. © 2014 Elsevier Inc. All rights reserved.

  13. MEASURING PATH DEPENDENCY

    Directory of Open Access Journals (Sweden)

    Peter Juhasz

    2017-03-01

    Full Text Available While risk management gained popularity during the last decades even some of the basic risk types are still far out of focus. One of these is path dependency that refers to the uncertainty of how we reach a certain level of total performance over time. While decision makers are careful in accessing how their position will look like the end of certain periods, little attention is given how they will get there through the period. The uncertainty of how a process will develop across a shorter period of time is often “eliminated” by simply choosing a longer planning time interval, what makes path dependency is one of the most often overlooked business risk types. After reviewing the origin of the problem we propose and compare seven risk measures to access path. Traditional risk measures like standard deviation of sub period cash flows fail to capture this risk type. We conclude that in most cases considering the distribution of the expected cash flow effect caused by the path dependency may offer the best method, but we may need to use several measures at the same time to include all the optimisation limits of the given firm

  14. Workload: Measurement and Management

    Science.gov (United States)

    Gore, Brian Francis; Casner, Stephen

    2010-01-01

    Poster: The workload research project has as its task to survey the available literature on: (1) workload measurement techniques; and (2) the effects of workload on operator performance. The first set of findings provides practitioners with a collection of simple-to-use workload measurement techniques along with characterizations of the kinds of tasks each technique has been shown reliably address. This allows design practitioners to select and use the most appropriate techniques for the task(s) at hand. The second set of findings provides practitioners with the guidance they need to design for appropriate kinds and amounts of workload across all tasks for which the operator is responsible. This guidance helps practitioners design systems and procedures that ensure appropriate levels of engagement across all tasks, and avoid designs and procedures that result in operator boredom, complacency, loss of awareness, undue levels of stress, or skill atrophy that can result from workload that distracts operators from the tasks they perform and monitor, workload levels that are too low, too high, or too consistent or predictable. Only those articles that were peer reviewed, long standing and generally accepted in the field, and applicable to a relevant range of conditions in a select domain of interest, in analogous "extreme" environments to those in space were included. In addition, all articles were reviewed and evaluated on uni-dimensional and multi-dimensional considerations. Casner & Gore also examined the notion of thresholds and the conditions that may benefit mostly from the various methodological approaches. Other considerations included whether the tools would be suitable for guiding a requirement-related and design-related question. An initial review of over 225 articles was conducted and entered into an EndNote database. The reference list included a range of conditions in the domain of interest (subjective/objective measures), the seminal works in workload, as

  15. Measuring Vision in Children

    Directory of Open Access Journals (Sweden)

    Petra Verweyen

    2004-01-01

    Full Text Available Measuring vision in children is a special skill requiring time, patience and understanding. Methods should be adapted to the child’s age, abilities, knowledge and experience. Young children are not able to describe their vision or explain their visual symptoms. Through observation, and with information from the mother or guardian, functional vision can be evaluated. While testing and observing children, an experienced assessor notices their responses to visual stimuli. These must be compared with the expected functional vision for children of the same age and abilities, so it is important to know the normal visual development.

  16. Measurably evolving populations

    DEFF Research Database (Denmark)

    Drummond, Alexei James; Pybus, Oliver George; Rambaut, Andrew

    2003-01-01

    processes through time. Populations for which such studies are possible � measurably evolving populations (MEPs) � are characterized by sufficiently long or numerous sampled sequences and a fast mutation rate relative to the available range of sequence sampling times. The impact of sequences sampled through...... time has been most apparent in the disciplines of RNA viral evolution and ancient DNA, where they enable us to estimate divergence times without paleontological calibrations, and to analyze temporal changes in population size, population structure and substitution rates. Thus, MEPs could increase our...

  17. Measuring Agricultural Bias

    DEFF Research Database (Denmark)

    Jensen, Henning Tarp; Robinson, Sherman; Tarp, Finn

    . For the 15 sample countries, the results indicate that the agricultural price incentive bias, which was generally perceived to exist during the 1980s, was largely eliminated during the 1990s. The results also demonstrate that general equilibrium effects and country-specific characteristics - including trade...... shares and intersectoral linkages - are crucial for determining the sign and magnitude of trade policy bias. The GE-ERP measure is therefore uniquely suited to capture the full impact of trade policies on agricultural price incentives. A Monte Carlo procedure confirms that the results are robust...

  18. $\\Upsilon$ Measurement in STAR

    CERN Document Server

    Cosentino, Mauro R

    2007-01-01

    We present preliminary results of Upsilon production in p+p collisions at sqrt(s)=200 GeV at central rapidity. This measurement was performed at the STAR experiment through the Upsilon->e^+e^- decay channel. In this manuscript we describe the experimental details, from the development of a specially designed trigger setup to the analysis methods used to discriminate electrons from hadrons. The production cross-section obtained B*{(dsigma/dy)|(y=0)}=91(28)(22) pb is compatible with our expectations based on pQCD calculations.

  19. Measurement in quantum physics

    Energy Technology Data Exchange (ETDEWEB)

    Danos, M. [Illinois Univ., Chicago, IL (United States); Kieu, T.D. [Melbourne Univ., Parkville, VIC (Australia). School of Physics]|[Columbia Univ., New York, NY (United States). Dept. of Physics

    1997-06-01

    The conceptual problems in quantum mechanics - including the collapse of the wave functions, the particle-wave duality, the meaning of measurement-arise from the need to ascribe particle character to the wave function, which describes only the wave aspects. It is demonstrated that all these problems can be resolved when working instead with quantum fields, which have both wave and particle character. The predictions of quantum physics, including Bell`s inequalities, remain unchanged from the standard treatments of quantum mechanics. 16 refs.

  20. Does Measurement Influence Behavior

    DEFF Research Database (Denmark)

    Schmidt, Marcus

    2014-01-01

    not access in their memory or that they otherwise would not form. Second, higher relative accessibility of intentions, compared with other inputs for purchase decisions may make subsequent purchase behavior more consistent with prior intentions. A couple of studies provide support of the self......The self-generated validity theory (Feldman and Lynch 1988) uses the following arguments: First, re-existing intentions may become more accessible in memory when the researcher asks the question. The measurement process thereby leads survey respondents to form judgments that they otherwise would...

  1. Measuring myocardial perfusion

    DEFF Research Database (Denmark)

    Qayyum, A A; Kastrup, J

    2015-01-01

    -pass of non-ionic and ionic contrast agents, respectively. Absolute quantification with CMR has yet to be established in routine clinical practice, while CT has yet to prove its diagnostic and prognostic value. The upcoming years may change the way we diagnose and treat patients suspected of having CAD......Recently, focus has changed from anatomical assessment of coronary arteries towards functional testing to evaluate the effect of stenosis on the myocardium before intervention. Besides positron-emission tomography (PET), cardiac MRI (CMR), and cardiac CT are able to measure myocardial perfusion...

  2. Radiometric temperature measurements fundamentals

    CERN Document Server

    Zhang, Zhuomin M; Machin, Graham

    2009-01-01

    This book describes the theory of radiation thermometry, both at a primary level and for a variety of applications, such as in the materials processing industries and remote sensing. This book is written for those who will apply radiation thermometry in industrial practice; use radiation thermometers for scientific research; the radiation thermometry specialist in a national measurement institute; developers of radiation thermometers who are working to innovate products for instrument manufacturers, and developers of non-contact thermometry methods to address challenging thermometry problems.

  3. Measuring user engagement

    CERN Document Server

    Lalmas, Mounia; Yom-Tov, Elad

    2014-01-01

    User engagement refers to the quality of the user experience that emphasizes the positive aspects of interacting with an online application and, in particular, the desire to use that application longer and repeatedly. User engagement is a key concept in the design of online applications (whether for desktop, tablet or mobile), motivated by the observation that successful applications are not just used, but are engaged with. Users invest time, attention, and emotion in their use of technology, and seek to satisfy pragmatic and hedonic needs. Measurement is critical for evaluating whether online

  4. Protective measures for personnel

    Energy Technology Data Exchange (ETDEWEB)

    Nickson, J.J.

    1946-12-13

    This document addresses radiation protection concerns for workers in the experimental laboratories and production plants where nuclear fission piles are being used. A broad in-depth discussion is provided based with the experiences gained in the Manhattan Project and being applied to contemporary activities. Discussion is thorough and encompasses control of external irradiations including alpha, beta, gamma, and neutron radiations; and control of radioactivity within the body by control of inhalation, ingestion, and entrance through skin or wounds. General measures for the control of radiation hazards is addressed by provision of clothing and waste disposal. An Appendix 1 is entitled General Rules and Procedures Concerning Activity Hazards.

  5. Measuring the chargino parameters

    Indian Academy of Sciences (India)

    J Kalinowski

    2000-07-01

    After the supersymmetric particles have been discovered, the priority will be to determine independently the fundamental parameters to reveal the structure of the underlying supersymmetric theory. In my talk I discuss how the chargino sector can be reconstructed completely by measuring the cross-sections with polarized beams at e+e- collider experiments: $\\tilde{X}^{+}_{i}\\tilde{X}^{-}_{j}[i,j=1,2]$. The closure of the two-chargino system can be investigated by analysing sum rules for the production cross-sections.

  6. Measuring Systemic Risk

    DEFF Research Database (Denmark)

    Acharya, Viral V.; Heje Pedersen, Lasse; Philippon, Thomas

    We present a simple model of systemic risk and we show that each financial institution's contribution to systemic risk can be measured as its systemic expected shortfall (SES), i.e., its propensity to be undercapitalized when the system as a whole is undercapitalized. SES increases...... with the institution's leverage and with its expected loss in the tail of the system's loss distribution. Institutions internalize their externality if they are ‘taxed’ based on their SES. We demonstrate empirically the ability of SES to predict emerging risks during the financial crisis of 2007-2009, in particular...

  7. Wind turbines acoustic measurements

    Science.gov (United States)

    Trematerra, Amelia; Iannace, Gino

    2017-07-01

    The importance of wind turbines has increased over the last few years throughout the European Community. The European energy policy guidelines state that for the year 2020 20% of all energy must be produced by alternative energy sources. Wind turbines are an important type of energy production without petrol. A wind speed in a range from 2.5 m/s to 25.0 m/s is needed. One of the obstacles to the widespread diffusion of wind turbine is noise generation. This work presents some noise measurements of wind turbines in the South of Italy, and discusses the noise problems for the people living near wind farms.

  8. Tungsten Alloy Outgassing Measurements

    CERN Document Server

    Rutherfoord, John P; Shaver, L

    1999-01-01

    Tungsten alloys have not seen extensive use in liquid argon calorimeters so far. Because the manufacturing process for tungsten is different from the more common metals used in liquid argon there is concern that tungsten could poison the argon thereby creating difficulties for precision calorimetry. In this paper we report measurements of outgassing from the tungsten alloy slugs proposed for use in the ATLAS FCal module and estimate limits on potential poisoning with reasonable assumptions. This estimate gives an upper limit poisoning rate of

  9. Antennas fundamentals, design, measurement

    CERN Document Server

    Long, Maurice

    2009-01-01

    This comprehensive revision (3rd Edition) is a senior undergraduate or first-year graduate level textbook on antenna fundamentals, design, performance analysis, and measurements. In addition to its use as a formal course textbook, the book's pragmatic style and emphasis on the fundamentals make it especially useful to engineering professionals who need to grasp the essence of the subject quickly but without being mired in unnecessary detail. This new edition was prepared for a first year graduate course at Southern Polytechnic State University in Georgia. It provides broad coverage of antenna

  10. Top quark mass measurement

    Energy Technology Data Exchange (ETDEWEB)

    Maki, Tuula [Univ. of Helsinki (Finland)

    2008-03-18

    The top quark is the heaviest elementary particle. Its mass is one of the fundamental parameters of the standard model of particle physics, and an important input to precision electroweak tests. This thesis describes three measurements of the top-quark mass in the dilepton decay channel. The dilepton events have two neutrinos in the final state; neutrinos are weakly interacting particles that cannot be detected with a multipurpose experiment. Therefore, the signal of dilepton events consists of a large amount of missing energy and momentum carried off by the neutrinos. The top-quark mass is reconstructed for each event by assuming an additional constraint from a top mass independent distribution. Template distributions are constructed from simulated samples of signal and background events, and parametrized to form continuous probability density functions. The final top-quark mass is derived using a likelihood fit to compare the reconstructed top mass distribution from data to the parametrized templates. One of the analyses uses a novel technique to add top mass information from the observed number of events by including a cross-section-constraint in the likelihood function. All measurements use data samples collected by the CDF II detector.

  11. Can we measure memes?

    Science.gov (United States)

    McNamara, Adam

    2011-01-01

    Memes are the fundamental unit of cultural evolution and have been left upon the periphery of cognitive neuroscience due to their inexact definition and the consequent presumption that they are impossible to measure. Here it is argued that although a precise definition of memes is rather difficult it does not preclude highly controlled experiments studying the neural substrates of their initiation and replication. In this paper, memes are termed as either internally or externally represented (i-memes/e-memes) in relation to whether they are represented as a neural substrate within the central nervous system or in some other form within our environment. It is argued that neuroimaging technology is now sufficiently advanced to image the connectivity profiles of i-memes and critically, to measure changes to i-memes over time, i.e., as they evolve. It is argued that it is wrong to simply pass off memes as an alternative term for "stimulus" and "learnt associations" as it does not accurately account for the way in which natural stimuli may dynamically "evolve" as clearly observed in our cultural lives.

  12. Can we Measure Memes?

    Directory of Open Access Journals (Sweden)

    Adam eMcNamara

    2011-05-01

    Full Text Available Memes are the fundamental unit of cultural evolution and have been left upon the periphery of cognitive neuroscience due to their inexact definition and the consequent presumption that they are impossible to measure. Here it is argued that although a precise definition of memes is rather difficult it does not preclude highly controlled experiments studying the neural substrates of their initiation and replication. In this paper, memes are termed as either internally or externally represented (i-memes / e-memes in relation to whether they are represented as a neural substrate within the Central Nervous System (CNS or in some other form within our environment. It is argued that neuroimaging technology is now sufficiently advanced to image the connectivity profiles of i-memes and critically, to measure changes to i-memes over time, i.e., as they evolve. It is argued that it is wrong to simply pass off memes as an alternative term for ‘stimulus’ and ‘learnt associations’ as it does not accurately account for the way in which natural stimuli may dynamically ‘evolve’ as clearly observed in our cultural lives.

  13. Can We Measure Memes?

    Science.gov (United States)

    McNamara, Adam

    2011-01-01

    Memes are the fundamental unit of cultural evolution and have been left upon the periphery of cognitive neuroscience due to their inexact definition and the consequent presumption that they are impossible to measure. Here it is argued that although a precise definition of memes is rather difficult it does not preclude highly controlled experiments studying the neural substrates of their initiation and replication. In this paper, memes are termed as either internally or externally represented (i-memes/e-memes) in relation to whether they are represented as a neural substrate within the central nervous system or in some other form within our environment. It is argued that neuroimaging technology is now sufficiently advanced to image the connectivity profiles of i-memes and critically, to measure changes to i-memes over time, i.e., as they evolve. It is argued that it is wrong to simply pass off memes as an alternative term for “stimulus” and “learnt associations” as it does not accurately account for the way in which natural stimuli may dynamically “evolve” as clearly observed in our cultural lives. PMID:21720531

  14. Turbine exhaust pressure measurements

    Energy Technology Data Exchange (ETDEWEB)

    Burns, J.M. [Stone & Webster Engineering Corp., Boston, MA (United States); Hernandez, E. [Community Energy Alternatives Inc., Ridgewood, NJ (United States)

    1996-05-01

    This paper discusses the dynamic operating environment in the turbine-condenser steam space and the two sensors, basket tips and guideplates, that have been approved by ASME test codes for measurement of the static pressure within that exhaust region. It defines the rigorous geometry and construction requirements of these sensors in order that they be acceptable for guarantee/acceptance testing. The paper also offers a practical alternative to the classical ASME PTC 6 (Turbine Test Code) basket tip design that is easier to fabricate in the typical utility machine shop. The alternative design makes it less expensive, much faster to construct, and facilitates the drainage of any accumulated condensate. Comparative field tests by PSE&G`s Research and Testing Laboratory conducted in 1995 at the 300 MW Mercer Generating Station, Unit 1 will be described which demonstrate the modified basket tip pressure measurements are statistically indistinguishable from those of the PTC 6 design. Noting that basket tip turbine exhaust static pressure sensors are recommended by all the major U.S. turbine manufacturers, the paper also presents the limited available history of the empirical basket tip and the lack of any documented calibration history related to the accuracy of the guideplate. Finally, based on the success of this one basket tip variation, the paper concludes that other even more suitable designs could be developed by further research.

  15. Measuring Creative Imagery Abilities

    Directory of Open Access Journals (Sweden)

    Dorota M. Jankowska

    2015-10-01

    Full Text Available Over the decades, creativity and imagination research developed in parallel, but they surprisingly rarely intersected. This paper introduces a new theoretical model of creative imagination, which bridges creativity and imagination research, as well as presents a new psychometric instrument, called the Test of Creative Imagery Abilities (TCIA, developed to measure creative imagery abilities understood in accordance with this model. Creative imagination is understood as constituted by three interrelated components: vividness (the ability to create images characterized by a high level of complexity and detail, originality (the ability to produce unique imagery, and transformativeness (the ability to control imagery. TCIA enables valid and reliable measurement of these three groups of abilities, yielding the general score of imagery abilities and at the same time making profile analysis possible. We present the results of eight studies on a total sample of more than 1,700 participants, showing the factor structure of TCIA using confirmatory factor analysis, as well as provide data confirming this instrument’s validity and reliability. The availability of TCIA for interested researchers may result in new insights and possibilities of integrating the fields of creativity and imagination science.

  16. Detailed IR aperture measurements

    CERN Document Server

    Bruce, Roderik; Garcia Morales, Hector; Giovannozzi, Massimo; Hermes, Pascal Dominik; Mirarchi, Daniele; Quaranta, Elena; Redaelli, Stefano; Rossi, Carlo; Skowronski, Piotr Krzysztof; Wretborn, Sven Joel; CERN. Geneva. ATS Department

    2016-01-01

    MD 1673 was carried out on October 5 2016, in order to investigate in more detail the available aperture in the LHC high-luminosity insertions at 6.5 TeV and β∗=40 cm. Previous aperture measurements in 2016 during commissioning had shown that the available aperture is at the edge of protection, and that the aperture bottleneck at β∗=40 cm in certain cases is found in the separation plane instead of in the crossing plane. Furthermore, the bottlenecks were consistently found in close to the upstream end of Q3 on the side of the incoming beam, and not in Q2 on the outgoing beam as expected from calculations. Therefore, this MD aimed at measuring IR1 and IR5 separately (at 6.5 TeV and β∗=40 cm, for 185 µrad half crossing angle), to further localize the bottlenecks longitudinally using newly installed BLMs, investigate the difference in aperture between Q2 and Q3, and to see if any aperture can be gained using special orbit bumps.

  17. Measuring and modelling concurrency

    Directory of Open Access Journals (Sweden)

    Larry Sawers

    2013-02-01

    Full Text Available This article explores three critical topics discussed in the recent debate over concurrency (overlapping sexual partnerships: measurement of the prevalence of concurrency, mathematical modelling of concurrency and HIV epidemic dynamics, and measuring the correlation between HIV and concurrency. The focus of the article is the concurrency hypothesis – the proposition that presumed high prevalence of concurrency explains sub-Saharan Africa's exceptionally high HIV prevalence. Recent surveys using improved questionnaire design show reported concurrency ranging from 0.8% to 7.6% in the region. Even after adjusting for plausible levels of reporting errors, appropriately parameterized sexual network models of HIV epidemics do not generate sustainable epidemic trajectories (avoid epidemic extinction at levels of concurrency found in recent surveys in sub-Saharan Africa. Efforts to support the concurrency hypothesis with a statistical correlation between HIV incidence and concurrency prevalence are not yet successful. Two decades of efforts to find evidence in support of the concurrency hypothesis have failed to build a convincing case.

  18. Measuring on Lattices

    Science.gov (United States)

    Knuth, Kevin H.

    2009-12-01

    Previous derivations of the sum and product rules of probability theory relied on the algebraic properties of Boolean logic. Here they are derived within a more general framework based on lattice theory. The result is a new foundation of probability theory that encompasses and generalizes both the Cox and Kolmogorov formulations. In this picture probability is a bi-valuation defined on a lattice of statements that quantifies the degree to which one statement implies another. The sum rule is a constraint equation that ensures that valuations are assigned so as to not violate associativity of the lattice join and meet. The product rule is much more interesting in that there are actually two product rules: one is a constraint equation arises from associativity of the direct products of lattices, and the other a constraint equation derived from associativity of changes of context. The generality of this formalism enables one to derive the traditionally assumed condition of additivity in measure theory, as well introduce a general notion of product. To illustrate the generic utility of this novel lattice-theoretic foundation of measure, the sum and product rules are applied to number theory. Further application of these concepts to understand the foundation of quantum mechanics is described in a joint paper in this proceedings.

  19. Measuring Attitudes Toward Inclusion

    Directory of Open Access Journals (Sweden)

    André Kunz

    2010-12-01

    Full Text Available The considerable worldwide demand for an inclusive education system has driven Switzerland to reconsider the approach of segregated schooling for children with Special Educational Needs (SEN. Recently, an agreement was signed among the states with the intention to adopt a more inclusive practice in school. There is evidence suggesting that an inclusive practice established at policy level is not enough, as many times it becomes teacher’s effort to translate the policies in classroom setting. The effectiveness of inclusive practices can be tightly related to the attitude of teachers, parents and students to inclusion of children with SEN in mainstreaming classes. Attitude towards inclusion is an observable construct but it presents difficulties in terms of measurement. For this purpose, in order to evaluate the attitude to inclusion of teachers, parents and students, an American Scale, the 11-items Parent Attitude to Inclusion (Palmer et al., 1998a, 1998b, 2001 and the version for teachers (Stanley, Grimbeek, Bryer, Beamisch, 2003; Bryer, Grimbeek, Beamish, Stanley, 2004, has been slightly modified and translated into German language. The resulting scales have been used to collect data in Switzerland in two regions. Results show that the German version of the scale can be potentially used for reliable measurement of attitudes toward inclusion in German speaking countries.

  20. Measuring Safeguards Culture

    Energy Technology Data Exchange (ETDEWEB)

    Frazar, Sarah L.; Mladineo, Stephen V.

    2011-07-19

    As the International Atomic Energy Agency (IAEA) implements a State Level Approach to its safeguards verification responsibilities, a number of countries are beginning new nuclear power programs and building new nuclear fuel cycle faculties. The State Level approach is holistic and investigatory in nature, creating a need for transparent, non-discriminatory judgments about a state's nonproliferation posture. In support of this need, the authors previously explored the value of defining and measuring a state's safeguards culture. We argued that a clear definition of safeguards culture and an accompanying set of metrics could be applied to provide an objective evaluation and demonstration of a country's nonproliferation posture. As part of this research, we outlined four high-level metrics that could be used to evaluate a state's nuclear posture. We identified general data points. This paper elaborates on those metrics, further refining the data points to generate a measurable scale of safeguards cultures. We believe that this work could advance the IAEA's goals of implementing a safeguards system that is fully information driven, while strengthening confidence in its safeguards conclusions.

  1. EPHIN anisotropy measurement capability

    Science.gov (United States)

    Banjac, S.; Gómez-Herrero, R.; Heber, B.; Kühl, P.; Terasa, C.

    2015-08-01

    The EPHIN instrument (Electron Proton Helium INstrument) forms a part of the COSTEP experiment (COmprehensive SupraThermal and Energetic Particle Analyzer) within the CEPAC collaboration on board of the SOHO spacecraft (SOlar and Heliospheric Observatory). The EPHIN sensor is a stack of six solid-state detectors surrounded by an anticoincidence. It measures energy spectra of electrons in the range 250 keV to > 8.7 MeV, and hydrogen and helium isotopes in the range 4 MeV/nuc to > 53 MeV/nuc. In order to improve the isotopic resolution, the first two detectors have been segmented: 5 sectors form a ring enclosing a central segment. This does not only allow to correct the energy-losses for particles with different path-lengths in the detectors, but allows also an estimation of the arrival direction with respect to the sensor axis. For that purpose we developed a method that allows for inferring the angle of incidence and angular distribution for ions. Here we describe the method and apply it to the November, 3, 2011 event. Due to the lack of magnetic field measurements and the restricted view cone of 83°, it is not possible to derive a real pitch angle distribution during this event. However, we can show that the particle distribution is anisotropic for several hours with a symmetry axis that deviates by about 20° from the sensor axis.

  2. Measuring zebrafish turning rate.

    Science.gov (United States)

    Mwaffo, Violet; Butail, Sachit; di Bernardo, Mario; Porfiri, Maurizio

    2015-06-01

    Zebrafish is becoming a popular animal model in preclinical research, and zebrafish turning rate has been proposed for the analysis of activity in several domains. The turning rate is often estimated from the trajectory of the fish centroid that is output by commercial or custom-made target tracking software run on overhead videos of fish swimming. However, the accuracy of such indirect methods with respect to the turning rate associated with changes in heading during zebrafish locomotion is largely untested. Here, we compare two indirect methods for the turning rate estimation using the centroid velocity or position data, with full shape tracking for three different video sampling rates. We use tracking data from the overhead video recorded at 60, 30, and 15 frames per second of zebrafish swimming in a shallow water tank. Statistical comparisons of absolute turning rate across methods and sampling rates indicate that, while indirect methods are indistinguishable from full shape tracking, the video sampling rate significantly influences the turning rate measurement. The results of this study can aid in the selection of the video capture frame rate, an experimental design parameter in zebrafish behavioral experiments where activity is an important measure.

  3. Intensity Biased PSP Measurement

    Science.gov (United States)

    Subramanian, Chelakara S.; Amer, Tahani R.; Oglesby, Donald M.; Burkett, Cecil G., Jr.

    2000-01-01

    The current pressure sensitive paint (PSP) technique assumes a linear relationship (Stern-Volmer Equation) between intensity ratio (I(sub o)/I) and pressure ratio (P/P(sub o)) over a wide range of pressures (vacuum to ambient or higher). Although this may be valid for some PSPs, in most PSPs the relationship is nonlinear, particularly at low pressures (less than 0.2 psia when the oxygen level is low). This non-linearity can be attributed to variations in the oxygen quenching (de-activation) rates (which otherwise is assumed constant) at these pressures. Other studies suggest that some paints also have non-linear calibrations at high pressures; because of heterogeneous (non-uniform) oxygen diffusion and quenching. Moreover, pressure sensitive paints require correction for the output intensity due to light intensity variation, paint coating variation, model dynamics, wind-off reference pressure variation, and temperature sensitivity. Therefore to minimize the measurement uncertainties due to these causes, an insitu intensity correction method was developed. A non-oxygen quenched paint (which provides a constant intensity at all pressures, called non-pressure sensitive paint, NPSP) was used for the reference intensity (I(sub NPSP) with respect to which all the PSP intensities (I) were measured. The results of this study show that in order to fully reap the benefits of this technique, a totally oxygen impermeable NPSP must be available.

  4. The measure matters

    CERN Document Server

    Amelino-Camelia, Giovanni; Gubitosi, Giulia; Magueijo, Joao

    2013-01-01

    We adopt a framework where quantum-gravity's dynamical dimensional reduction of spacetime at short distances is described in terms of modified dispersion relations. We observe that by subjecting such models to a momentum-space diffeomorphism one obtains a "dual picture" with unmodified dispersion relations, but a modified measure of integration over momenta. We then find that the UV {\\it Hausdorff} dimension of momentum space which can be inferred from this modified integration measure coincides with the short-distance {\\it spectral} dimension of spacetime. This result sheds light into why scale-invariant fluctuations are obtained if the original model for two UV spectral dimensions is combined with Einstein gravity. By studying the properties of the inner product we derive the result that it is only in 2 energy-momentum dimensions that microphysical vacuum fluctuations are scale-invariant. This is true ignoring gravity, but then we find that if Einstein gravity is postulated in the original frame, in the dua...

  5. Primordial Deuterium Abundance Measurements

    CERN Document Server

    Levshakov, S A; Takahara, F; Levshakov, Sergei A.; Kegel, Wilhelm H.; Takahara, Fumio

    1997-01-01

    Deuterium abundances measured recently from QSO absorption-line systems lie in the range from 3 10^{-5} to 3 10^{-4}, which shed some questions on standard big bang theory. We show that this discordance may simply be an artifact caused by inadequate analysis ignoring spatial correlations in the velocity field in turbulent media. The generalized procedure (accounting for such correlations) is suggested to reconcile the D/H measurements. An example is presented based on two high-resolution observations of Q1009+2956 (low D/H) [1,2] and Q1718+4807 (high D/H) [8,9]. We show that both observations are compatible with D/H = 4.1 - 4.6 10^{-5}, and thus support SBBN. The estimated mean value = 4.4 10^{-5} corresponds to the baryon-to-photon ratio during SBBN eta = 4.4 10^{-10} which yields the present-day baryon density Omega_b h^2 = 0.015.

  6. Gamma Astrometric Measurement Experiment

    Science.gov (United States)

    Gai, M.; Lattanzi, M. G.; Ligori, S.; Loreggia, D.; Vecchiato, A.

    GAME aims at the measurement of gravitational deflection of the light by the Sun, by an optimised telescope on board a small class satellite. The targeted precision on the gamma parameter of the Parametrised Post-Newtonian formulation of General Relativity is below 10-6, i.e. one to two orders of magnitude better than the best current results. Such precision is suitable to detect possible deviations from the unity value, associated to generalised Einstein models for gravitation, with potentially huge impacts on the cosmological distribution of dark matter and dark energy. The measurement principle is based on differential astrometry. The observations also allow additional scientific objectives related to tests of General Relativity and to the study of exo-planetary systems. The instrument concept is based on a dual field, multiple aperture Fizeau interferometer, observing simultaneously two regions close to the Solar limb. The diluted optics achieves efficient rejection of the solar radiation, with good angular resolution on the science targets. We describe the science motivation, the proposed mission implementation and the expected performance.

  7. Wavefront Measurement in Ophthalmology

    Science.gov (United States)

    Molebny, Vasyl

    Wavefront sensing or aberration measurement in the eye is a key problem in refractive surgery and vision correction with laser. The accuracy of these measurements is critical for the outcome of the surgery. Practically all clinical methods use laser as a source of light. To better understand the background, we analyze the pre-laser techniques developed over centuries. They allowed new discoveries of the nature of the optical system of the eye, and many served as prototypes for laser-based wavefront sensing technologies. Hartmann's test was strengthened by Platt's lenslet matrix and the CCD two-dimensional photodetector acquired a new life as a Hartmann-Shack sensor in Heidelberg. Tscherning's aberroscope, invented in France, was transformed into a laser device known as a Dresden aberrometer, having seen its reincarnation in Germany with Seiler's help. The clinical ray tracing technique was brought to life by Molebny in Ukraine, and skiascopy was created by Fujieda in Japan. With the maturation of these technologies, new demands now arise for their wider implementation in optometry and vision correction with customized contact and intraocular lenses.

  8. Measuring against clinical standards.

    Science.gov (United States)

    Shaw, Charles D

    2003-07-15

    Systematic improvement of health services requires the objective measurement of people, practices and organisations against valid and explicit standards in order to identify and implement appropriate change. Effective quality systems must embrace a wide range of definitions of quality, and a similar variety of approaches to defining, measuring and improving. Clinical performance may be examined from three professional viewpoints--clinical competence: assessment of individual practitioners against explicit criteria to recognise achievement and to promote continuing development. Traditional mechanisms of training, registration and accreditation enable clinicians to reach career grades but responsibility for subsequent support is often unclear between employers, professions and registering bodies. Clinical practice: assessment of actual clinical process and outcomes against research-based "best practice" to identify and reduce variation. Peer review, clinical audit and confidential enquiries are examples of this approach, which may involve single or multiple professional groups and their interface with management. Service accreditation: systems to assess health care organisations against published standards in order to encourage best management practice. These are usually run on a regional or national basis and, though sensitive to expectations of patients, managers, clinicians, paying agencies and government, they are usually managed by an impartial but authoritative organisation.

  9. A measure of the multiverse

    Energy Technology Data Exchange (ETDEWEB)

    Vilenkin, Alexander [Department of Physics and Astronomy, Institute of Cosmology, Tufts University, Medford, MA 02155 (United States)

    2007-06-22

    I review recent progress in defining a probability measure in the inflationary multiverse. General requirements for a satisfactory measure are formulated and recent proposals for the measure are clarified and discussed.

  10. Entanglement swapping without joint Measurement

    CERN Document Server

    Yang, M; Cao, Z L; Yang, Ming; Song, Wei; Cao, Zhuo-Liang

    2004-01-01

    We propose an entanglement swapping scheme in cavity QED. In the scheme, the previously used joint measurement is not needed. Only single measurement on cavity can realize the swapping process, which avoids the difficulty of measurement on atomic state.

  11. Electrical measurement, signal processing, and displays

    CERN Document Server

    Webster, John G

    2003-01-01

    ELECTROMAGNETIC VARIABLES MEASUREMENTVoltage MeasurementCurrent Measurement Power Measurement Power Factor Measurement Phase Measurement Energy Measurement Electrical Conductivity and Resistivity Charge Measurement Capacitance and Capacitance Measurements Permittivity Measurement Electric Field Strength Magnetic Field Measurement Permeability and Hysteresis MeasurementInductance Measurement Immittance MeasurementQ Factor Measurement Distortion Measurement Noise Measurement.Microwave Measurement SIGNAL PROCESSINGAmplifiers and Signal ConditionersModulation Filters Spectrum Analysis and Correlat

  12. Electronic Warfare Signature Measurement Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Electronic Warfare Signature Measurement Facility contains specialized mobile spectral, radiometric, and imaging measurement systems to characterize ultraviolet,...

  13. Electronic Warfare Signature Measurement Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Electronic Warfare Signature Measurement Facility contains specialized mobile spectral, radiometric, and imaging measurement systems to characterize ultraviolet,...

  14. Stratospheric Aerosol Measurements

    Science.gov (United States)

    Pueschel, Rudolf, F.; Gore, Warren J. (Technical Monitor)

    1998-01-01

    Stratospheric aerosols affect the atmospheric energy balance by scattering and absorbing solar and terrestrial radiation. They also can alter stratospheric chemical cycles by catalyzing heterogeneous reactions which markedly perturb odd nitrogen, chlorine and ozone levels. Aerosol measurements by satellites began in NASA in 1975 with the Stratospheric Aerosol Measurement (SAM) program, to be followed by the Stratospheric Aerosol and Gas Experiment (SAGE) starting in 1979. Both programs employ the solar occultation, or Earth limb extinction, techniques. Major results of these activities include the discovery of polar stratospheric clouds (PSCs) in both hemispheres in winter, illustrations of the impacts of major (El Chichon 1982 and Pinatubo 1991) eruptions, and detection of a negative global trend in lower stratospheric/upper tropospheric aerosol extinction. This latter result can be considered a triumph of successful worldwide sulfur emission controls. The SAGE record will be continued and improved by SAGE III, currently scheduled for multiple launches beginning in 2000 as part of the Earth Observing System (EOS). The satellite program has been supplemented by in situ measurements aboard the ER-2 (20 km ceiling) since 1974, and from the DC-8 (13 km ceiling) aircraft beginning in 1989. Collection by wire impactors and subsequent electron microscopic and X-ray energy-dispersive analyses, and optical particle spectrometry have been the principle techniques. Major findings are: (1) The stratospheric background aerosol consists of dilute sulfuric acid droplets of around 0.1 micrometer modal diameter at concentration of tens to hundreds of monograms per cubic meter; (2) Soot from aircraft amounts to a fraction of one percent of the background total aerosol; (3) Volcanic eruptions perturb the sulfuric acid, but not the soot, aerosol abundance by several orders of magnitude; (4) PSCs contain nitric acid at temperatures below 195K, supporting chemical hypotheses

  15. Optimal distribution of measurement time in single channel measurements

    CERN Document Server

    Kaspar, J

    2008-01-01

    Single channel measurements play a minor role in today physics, but they are sometimes unavoidable. Comparing to multichannel measurements, there is distribution of measurement time to be chosen in an experiment design. A method to optimize distribution of measurement time is given, where optimal distribution minimizes standard deviation of a selected fit parameter. As an example, the method is applied to electron spectroscopy experiments.

  16. Measuring Systemic Risk

    DEFF Research Database (Denmark)

    Heje Pedersen, Lasse

    We present a simple model of systemic risk and we show that each financial institution’s contribution to systemic risk can be measured as its systemic expected shortfall (SES), i.e., its propensity to be undercapitalized when the system as a whole is undercapitalized. SES increases...... with the institution’s leverage and with its expected loss in the tail of the system’s loss distribution. Institutions internalize their externality if they are “taxed” based on their SES. We demonstrate empirically the ability of SES to predict emerging risks during the financial crisis of 2007-2009, in particular......, (i) the outcome of stress tests performed by regulators; (ii) the decline in equity valuations of large financial firms in the crisis; and, (iii) the widening of their credit default swap spreads....

  17. Measuring integrated care

    DEFF Research Database (Denmark)

    Strandberg-Larsen, Martin

    2011-01-01

    respond to these needs, patients and providers face the multiple challenges of today's healthcare environment. Decision makers, planners and managers need evidence based policy options and information on the scope of the integrated care challenges they are facing. The US managed care organization Kaiser...... Permanente has been put forward as an example for European healthcare systems to follow, although the evidence base is far from conclusive. The thesis has five objectives: 1) To contribute to the understanding of the concept of integration in healthcare systems and to identify measurement methods to capture...... and performance of the Danish healthcare system and the managed care organization Kaiser Permanente, California, US. 5) To compare primary care clinicians' perception of clinical integration in two healthcare systems: Kaiser Permanente, Northern California and the Danish healthcare system. Further to examine...

  18. Measuring Quality in Libraries

    Directory of Open Access Journals (Sweden)

    Didar Bayır

    2007-11-01

    Full Text Available This paper is based on the proceedings of a Seminar held at the Bibliothèque Nationale in Paris on 23 March 2007. The Seminar involved 26 invited participants from eleven countries and included nine presentations followed by detailed discussion and the exchange of ideas. The broad themes were: Tools for Quality Measurement, Standards and Performance Indicators, Benchmarking and Auditing. The Seminar’s agreed purpose was to identify the available tools, such as LibQUAL+ and ISO standards, to explore the results of the assessments undertaken, to identify actions to take forward, to look at the issues involved from a European perspective and to identify the basis for comparisons across Europe.

  19. Commentary on measuring disability.

    Science.gov (United States)

    Goldman, Howard H

    2013-09-01

    This is a commentary on 5 articles in this issue of Archives of Physical Medicine and Rehabilitation that report on several related studies of new approaches to measuring disability. The project was grounded in theory, beginning with the development of a conceptual framework enhanced by a literature review and expert consultation within and outside of the Social Security Administration. The investigators then used item response theory to develop test items, which they organized into computer adaptive testing instruments and tested them for their psychometric properties. All in all, it is a groundbreaking set of studies and an enormously valuable contribution to the field. Hopefully it will also be tested as an alternative approach to assessing disability in the Social Security Administration disability benefits programs.

  20. Thermal microstructure measurement system

    Science.gov (United States)

    Carver, Michael J. (Inventor)

    1985-01-01

    A thermal microstructure measurement system (TMMS) operates autonomously h its own internal power supply and telemeters data to a platform. A thermal array is mounted on a cross-braced frame designed to orient itself normal to existing currents with fixed sensor positioning bars protruding from the cross bars. A plurality of matched thermistors, conductivity probes and inclinometers are mounted on the frame. A compass and pressure transducer are contained in an electronics package suspended below the array. The array is deployed on a taut mooring below a subsurface float. Data are digitized, transmitted via cable to a surface buoy and then telemetered to the platform where the data is processed via a computer, recorded and/or displayed. The platform computer also sends commands to the array via telemetry.

  1. Measurements of the Q

    Energy Technology Data Exchange (ETDEWEB)

    P.L. Anthony; R.Greg Arnold; Todd Averett; H.R. Band; M.C. Berisso; H. Borel; Peter Bosted; S.L. Bultmann; M. Buenerd; T. Chupp; Steve Churchwell; G.R. Court; Donald Crabb; Donal Day; P. Decowski; P. DePietro; R. Erbacher; R. Erickson; A. Feltham; Helene Fonvieille; Emil Frlez; R. Gearhart; V. Ghazikhanian; Javier Gomez; Keith Griffioen; Chris Harris; M.A. Houlden; E.W. Hughes; Charles Hyde-Wright; G. Igo; Sebastian Incerti; John Jensen; J.R. Johnson; P.M. King; Yu.G. Kolomensky; Sebastian E. Kuhn; Richard Lindgren; R.M. Lombard-Nelsen; Jacques Marroncle; James McCarthy; Paul McKee; W. Meyer; G.S. Mitchell; Joseph Mitchell; M. Olson; S. Penttila; Gerald Peterson; Gerassimos G. Petratos; R. Pitthan; Dinko Pocanic; R. Prepost; Charles Y. Prescott; Liming Qin; Brian Raue; D. Reyna; L.S. Rochester; Stephen Rock; Oscar Rondon-Aramayo; Franck Sabatie; Ingo Sick; Timothy Smith; Lee Sorrell; F. Staley; S. St. Lorant; L.M. Stuart; Z. Szalata; Y. Terrien; Al Tobias; Luminita Todor; T. Toole; S. Trentalange; D. Walz; Robert Welsh; Frank Wesselmann; T.R. Wright; C.C. Young; Marko Zeier; Hongguo Zhu; Beni Zihlmann

    1999-11-01

    The structure functions g1p and g1n have been measured over the range 0.014 < x < 0.9 and 1 < Q2 < 40 GeV2 using deep-inelastic scattering of 48 GeV longitudinally polarized electrons from polarized protons and deuterons. We find that the Q2 dependence of g1p (g1n) at fixed x is very similar to that of the spin-averaged structure function F1p (F1n). From a NLO QCD fit to all available data we find Gamma{sub 1}{sup p} Gamma{sub 1}{sup n}=0.176 {+-} 0.003 {+-} 0.007$ at Q2=5 GeV2, in agreement with the Bjorken sum rule prediction of 0.182 {+-} 0.005.

  2. Measuring Polarization with DASI

    CERN Document Server

    Leitch, E M; Pryke, C L; Reddall, B; Sandberg, E S; Dragovan, M; Carlstrom, J E; Halverson, N W; Holzapfel, W L

    2002-01-01

    We describe an experiment to measure the polarization of the Cosmic Microwave Background (CMB) with the Degree Angular Scale Interferometer (DASI), a compact microwave interferometer optimized to detect CMB anisotropy at multipoles 140 to 900. The telescope has operated at the Amundsen-Scott South Pole research station since 2000 January. The telescope was retrofit as a polarimeter during the 2000--2001 austral summer, and throughout the 2001 and 2002 austral winters has made observations of the CMB with sensitivity to all four Stokes parameters. The telescope performance has been extensively characterized through observations of artificial sources, the Moon, and polarized and unpolarized Galactic sources. In 271 days of observation, DASI has differenced the CMB fluctuations in two fields to an rms noise level of 2.8 uK.

  3. Measuring integrated care

    DEFF Research Database (Denmark)

    Strandberg-Larsen, Martin

    2011-01-01

    The positive outcomes of coordination of healthcare services are to an increasing extent becoming clear. However the complexity of the field is an inhibiting factor for vigorously designed trial studies. Conceptual clarity and a consistent theoretical frame-work are thus needed. While researchers...... Permanente has been put forward as an example for European healthcare systems to follow, although the evidence base is far from conclusive. The thesis has five objectives: 1) To contribute to the understanding of the concept of integration in healthcare systems and to identify measurement methods to capture...... Permanente, Northern California was completed to allow for comparison of clinical integration in the two systems and system specific associated factors. In this thesis a conceptual framework and a model for assessment of the conditions for integrations as an intermediate healthcare system outcome...

  4. Measuring Dark Molecular Gas

    Science.gov (United States)

    Li, Di; Heiles, Carl E.

    2017-01-01

    It is now well known that a substantial fraction of Galactic molecular gas cannot be traced by CO emission. The thus dubbed CO dark molecular gas (DMG) occupy a large volume of ISM with intermediate extinction, where CO is either not self-shielded and/or subthermally excited. We explore the utilities of simple hydrides, such OH, CH, etc., in tracing DMG. We mapped and modeled the transition zone cross a cloud boundary and derived emperical OH abundance and DMG distribution formulae. We also obtained absorption measurements of various species using Arecibo, VLA, ATCA, and ALMA. The absorption technique has the potential to provide systematic quantification of DMG in the next few years.

  5. Liquid Metal Dynamo Measurements

    Science.gov (United States)

    Luh, W. J.; Choi, Y. H.; Hardy, B. S.; Brown, M. R.

    1997-11-01

    Detection of convected magnetic fields in a small-scale liquid metal dynamo is attempted. Initial experiments will focus on the conversion of toroidal to poloidal flux (a version of the ω effect). A precision vector magnetometer will be used to measure the effect of a rotating magnetofluid on a static magnetic field. Water will be used as a control medium and effects will be compared with a conducting medium (liquid sodium or NaK). A small spherical flask (0.16 m diameter) houses 2 liters of fluid, a teflon stirrer creates an asymmetrical flow pattern, and Helmholtz coils generate a constant magnetic field on the order of 10 gauss. The Reynold's number will be of order unity.

  6. Performance Measurement at Universities

    DEFF Research Database (Denmark)

    Lueg, Klarissa

    2014-01-01

    and legitimation forms the basis for proposing four steps of investigation. The suggested mixed-methods approach comprises the following: first, thematic analysis can serve as a tool to evaluate the legitimacy discourse as initiated by official SET affirmative documents by government, university, and students......, it can be investigated if SET actually contribute to teaching improvement by examining how the instrument is integrated into systematic ex-ante and ex-post organizational management. It is expected to find discrepancy between the proponents’ intent to evaluate teaching and the way the performance......This paper proposes empirical approaches to testing the reliability, validity, and organizational effectiveness of student evaluations of teaching (SET) as a performance measurement instrument in knowledge management at the institutional level of universities. Departing from Weber’s concept...

  7. Measuring Tax Efficiency

    DEFF Research Database (Denmark)

    Raimondos-Møller, Pascalis; Woodland, Alan D.

    2004-01-01

    This paper introduces an index of tax optimality thatmeasures the distance of some current tax structure from the optimal taxstructure in the presence of public goods. In doing so, we derive a [0, 1]number that reveals immediately how far the current tax configurationis from the optimal one and......, thereby, the degree of efficiency of a taxsystem. We call this number the Tax Optimality Index. We show howthe basic method can be altered in order to derive a revenue equivalentuniform tax, which measures the size of the public sector. A numericalexample is used to illustrate the method developed.......JEL Code: H21, H41.Keywords: Tax optimality index, excess burden, distance function.Authors Affiliations: Raimondos-Møller: Copenhagen Business School, CEPR,CESifo, and EPRU. Woodland: University of Sydney....

  8. Measuring the Invisible

    Directory of Open Access Journals (Sweden)

    Claudio Gagliardini

    2010-06-01

    Full Text Available The term "metrotomography" is the result of the combination of metrology and tomography. Unlike traditional computer tomography, metrotomography goes beyond pure visual checks, offering the opportunity to accurately measure internal and external geometries of complex objects, using non-destructive procedures. The 3D model of the object is obtained by composing a sequence of images obtained through electromagnetic radiation during a 360° rotation of the object. The accurate and complete description of the micro scale detail of the object allows to perform analysis and tests that, in some cases, significantly reduce the timeframes in respect to traditional methods and in other cases allow investigations that couldn’t be completed until today.

  9. Viral quasispecies complexity measures.

    Science.gov (United States)

    Gregori, Josep; Perales, Celia; Rodriguez-Frias, Francisco; Esteban, Juan I; Quer, Josep; Domingo, Esteban

    2016-06-01

    Mutant spectrum dynamics (changes in the related mutants that compose viral populations) has a decisive impact on virus behavior. The several platforms of next generation sequencing (NGS) to study viral quasispecies offer a magnifying glass to study viral quasispecies complexity. Several parameters are available to quantify the complexity of mutant spectra, but they have limitations. Here we critically evaluate the information provided by several population diversity indices, and we propose the introduction of some new ones used in ecology. In particular we make a distinction between incidence, abundance and function measures of viral quasispecies composition. We suggest a multidimensional approach (complementary information contributed by adequately chosen indices), propose some guidelines, and illustrate the use of indices with a simple example. We apply the indices to three clinical samples of hepatitis C virus that display different population heterogeneity. Areas of virus biology in which population complexity plays a role are discussed.

  10. Measuring to improve.

    Science.gov (United States)

    Klein, R; Bobbitt, M

    1995-01-01

    Rush Prudential Health Plans, a managed care company located in Chicago, Illinois, is implementing a service quality improvement process across the three products it markets in the Chicago area: The Anchor Plan (a primarily staff model HMO), The Affiliates Plan (a network model HMO), and The Plus Plan (a point of service plan). In 1994, the company instituted an annual member satisfaction research study, conducted across the three plans, and began building a link between external customer requirements and internal operations. The research process consisted of three stages: determining external customer requirements, translating these customer-defined "symptoms" into underlying root causes, and developing a service quality improvement action plan. Rush Prudential determined that traditional "report card" surveys would not meet their goals for the information measurement process. A detailed diagnostic telephone survey was used to provide a picture of the entire clinical encounter, from scheduling an appointment through the time a member left the physician's office.

  11. NIF Ambient Vibration Measurements

    Energy Technology Data Exchange (ETDEWEB)

    Noble, C.R.; Hoehler, M.S., S.C. Sommer

    1999-11-29

    LLNL has an ongoing research and development project that includes developing data acquisition systems with remote wireless communication for monitoring the vibrations of large civil engineering structures. In order to establish the capability of performing remote sensing over an extended period of time, the researchers needed to apply this technology to a real structure. The construction of the National Ignition Facility provided an opportunity to test the data acquisition system on a large structure to monitor whether the facility is remaining within the strict ambient vibration guidelines. This document will briefly discuss the NIF ambient vibration requirements and summarize the vibration measurements performed during the Spring and Summer of 1999. In addition, a brief description of the sensors and the data acquisition systems will be provided in Appendix B.

  12. Calorimetric measuring systems

    DEFF Research Database (Denmark)

    Ritchie, Andrew Ewen; Pedersen, John Kim; Blaabjerg, Frede

    2004-01-01

    the system cooling requirement. A common problem is that high-frequency phenomena like proximity effect, skin effect, hysteresis losses, and eddy current losses appear in the systems. These losses are very difficult to treat both theoretically and in practice. It is often difficult to measure the effect......Power Electronics remains an emerging technology. New materials, new devices, and new circuit topologies reduce the cost, weight, and volume for important applications [1]. Two important factors in power electronic circuits are the switching speed of the devices and the total power losses...... in the system. If the switching speed can be increased, improvements may be possible (e.g., current ripple in an electrical machine or physical size of passive components may be reduced). On the other hand, increased switching speed may cause additional losses in a power electronic system and increase...

  13. NIF Ambient Vibration Measurements

    Energy Technology Data Exchange (ETDEWEB)

    Noble, C.R.; Hoehler, M.S., S.C. Sommer

    1999-11-29

    LLNL has an ongoing research and development project that includes developing data acquisition systems with remote wireless communication for monitoring the vibrations of large civil engineering structures. In order to establish the capability of performing remote sensing over an extended period of time, the researchers needed to apply this technology to a real structure. The construction of the National Ignition Facility provided an opportunity to test the data acquisition system on a large structure to monitor whether the facility is remaining within the strict ambient vibration guidelines. This document will briefly discuss the NIF ambient vibration requirements and summarize the vibration measurements performed during the Spring and Summer of 1999. In addition, a brief description of the sensors and the data acquisition systems will be provided in Appendix B.

  14. Measuring integrated care.

    Science.gov (United States)

    Strandberg-Larsen, Martin

    2011-02-01

    The positive outcomes of coordination of healthcare services are to an increasing extent becoming clear. However the complexity of the field is an inhibiting factor for vigorously designed trial studies. Conceptual clarity and a consistent theoretical frame-work are thus needed. While researchers respond to these needs, patients and providers face the multiple challenges of today's healthcare environment. Decision makers, planners and managers need evidence based policy options and information on the scope of the integrated care challenges they are facing. The US managed care organization Kaiser Permanente has been put forward as an example for European healthcare systems to follow, although the evidence base is far from conclusive. The thesis has five objectives: 1) To contribute to the understanding of the concept of integration in healthcare systems and to identify measurement methods to capture the multi-dimensional aspects of integrated healthcare delivery. 2) To assess the level of integration of the Danish healthcare system. 3) To assess the use of joint health plans as a tool for coordination between the regional and local level in the Danish healthcare system. 4) To compare the inputs and performance of the Danish healthcare system and the managed care organization Kaiser Permanente, California, US. 5) To compare primary care clinicians' perception of clinical integration in two healthcare systems: Kaiser Permanente, Northern California and the Danish healthcare system. Further to examine the associations between specific organizational factors and clinical integration within each system. The literature was systematically searched to identify methods for measurement of integrated healthcare delivery. A national cross-sectional survey was conducted among major professional stake-holders at five different levels of the Danish healthcare system. The survey data were used to allow for analysis of the level of integration achieved. Data from the survey were

  15. Density measures and additive property

    OpenAIRE

    Kunisada, Ryoichi

    2015-01-01

    We deal with finitely additive measures defined on all subsets of natural numbers which extend the asymptotic density (density measures). We consider a class of density measures which are constructed from free ultrafilters on natural numbers and study a certain additivity property of such density measures.

  16. Density measures and additive property

    OpenAIRE

    Kunisada, Ryoichi

    2015-01-01

    We deal with finitely additive measures defined on all subsets of natural numbers which extend the asymptotic density (density measures). We consider a class of density measures which are constructed from free ultrafilters on natural numbers and study a certain additivity property of such density measures.

  17. Rational Normalization of Concentration Measures.

    Science.gov (United States)

    Bonckaert, P.; Egghe, L.

    1991-01-01

    Discusses normalization features of good concentration measures and extends the range of values of concentration measures that are population-size-independent. Rational normalization is described, and mathematical formulas for the coefficient of variation, Pratt's measure, the Gini index, Theil's measure, and Atkinson's indices are explained. (14…

  18. Automated Methods Of Corrosion Measurements

    DEFF Research Database (Denmark)

    Bech-Nielsen, Gregers; Andersen, Jens Enevold Thaulov; Reeve, John Ch

    1997-01-01

    The chapter describes the following automated measurements: Corrosion Measurements by Titration, Imaging Corrosion by Scanning Probe Microscopy, Critical Pitting Temperature and Application of the Electrochemical Hydrogen Permeation Cell.......The chapter describes the following automated measurements: Corrosion Measurements by Titration, Imaging Corrosion by Scanning Probe Microscopy, Critical Pitting Temperature and Application of the Electrochemical Hydrogen Permeation Cell....

  19. Measuring online social bubbles

    Directory of Open Access Journals (Sweden)

    Dimitar Nikolov

    2015-12-01

    Full Text Available Social media have become a prevalent channel to access information, spread ideas, and influence opinions. However, it has been suggested that social and algorithmic filtering may cause exposure to less diverse points of view. Here we quantitatively measure this kind of social bias at the collective level by mining a massive datasets of web clicks. Our analysis shows that collectively, people access information from a significantly narrower spectrum of sources through social media and email, compared to a search baseline. The significance of this finding for individual exposure is revealed by investigating the relationship between the diversity of information sources experienced by users at both the collective and individual levels in two datasets where individual users can be analyzed—Twitter posts and search logs. There is a strong correlation between collective and individual diversity, supporting the notion that when we use social media we find ourselves inside “social bubbles.” Our results could lead to a deeper understanding of how technology biases our exposure to new information.

  20. Bilirubin measurements in neonates

    Science.gov (United States)

    Newman, Gregory J.

    2000-04-01

    Infant Jaundice is a physiologic condition of elevated bilirubin in the tissue that affects nearly 60 percent of all term newborns and virtually 100 percent of premature infants. The high production of bilirubin in the newborn circulatory system and the inability of the immature liver to process and eliminate it case the condition. When the bilirubin levels rise, it starts to deposit in the baby's skin and in the brain. The deposits in the brain can cause neurologic impairment and death. The BiliCheck is a handheld, battery-powered device that measures the level of jaundice non-invasively using BioPhotonics at the point of care. The result is displayed on an LCD screen immediately, so physicians can now make treatment decision without waiting for results to return from the lab. The BiliCheck System has been marketed worldwide since April of 1998 and has received FDA clearance for use in the USA on pre-photo therapy infants in March of 1999.

  1. Measuring on Lattices

    CERN Document Server

    Knuth, Kevin H

    2009-01-01

    Previous derivations of the sum and product rules of probability theory relied on the algebraic properties of Boolean logic. Here they are derived within a more general framework based on lattice theory. The result is a new foundation of probability theory that encompasses and generalizes both the Cox and Kolmogorov formulations. In this picture probability is a bi-valuation defined on a lattice of statements that quantifies the degree to which one statement implies another. The sum rule is a constraint equation that ensures that valuations are assigned so as to not violate associativity of the lattice join and meet. The product rule is much more interesting in that there are actually two product rules: one is a constraint equation arises from associativity of the direct products of lattices, and the other a constraint equation derived from associativity of changes of context. The generality of this formalism enables one to derive the traditionally assumed condition of additivity in measure theory, as well in...

  2. RF Measurement Concepts

    CERN Document Server

    Caspers, F

    2014-01-01

    For the characterization of components, systems and signals in the radiofrequency (RF) and microwave ranges, several dedicated instruments are in use. In this article the fundamentals of the RF signal techniques are discussed. The key element in these front ends is the Schottky diode which can be used either as a RF mixer or as a single sampler. The spectrum analyser has become an absolutely indispensable tool for RF signal analysis. Here the front end is the RF mixer as the RF section of modern spectrum analyses has a ra ther complex architecture. The reasons for this complexity and certain working principles as well as limitations are discussed. In addition, an overview of the development of scalar and vector signal analysers is given. For the determination of the noise temperature of a one-port and the noise figure of a two-port, basic concepts and relations are shown as well as a brief discussion of commonly used noise-measurement techniques. In a further part of this article the operating principles of n...

  3. Perinatal programming prevention measures.

    Science.gov (United States)

    Larguía, A Miguel; González, María Aurelia; Dinerstein, Néstor Alejandro; Soto Conti, Constanza

    2015-01-01

    Over the past 10 years, there has been outstanding scientific progress related to perinatal programming and its epigenetic effects in health, and we can anticipate this trend will continue in the near future. We need to make use and apply these achievements to human neurodevelopment via prevention interventions. Based on the concept of the interaction between genome and ambiome, this chapter proposes low-cost easy-implementation preventive strategies for maternal and infant health institutions.Breastfeeding and human milk administration are the first preventive measures, as has been reviewed in the policy statement of the American Academy of Pediatrics. Another strategy is the Safe and Family-Centered Maternity Hospitals initiative that promotes and empowers the inclusion of the families and the respect for their rights, especially during pregnancy and birth. (This change of paradigm was approved and is recommended by both United Nations Children's Fund, UNICEF, and Pan American Health Organization, PAHO.) Then, there is also an important emphasis given to the sacred hour-which highlights the impact of bonding, attachment, and breastfeeding during the first hour of life-the pain prevention and treatment in newborns, the control of the "new morbidity" represented by late preterm infants, and finally, the importance of avoiding intrauterine and extrauterine growth restriction. (However, there are not yet clear recommendations about nutritional interventions in order to diminish the potential metabolic syndrome consequence in the adult.).

  4. On Jordan's measurements

    CERN Document Server

    Brechenmacher, Frederic

    2011-01-01

    The Jordan measure, the Jordan curve theorem, as well as the other generic references to Camille Jordan's (1838-1922) achievements highlight that the latter can hardly be reduced to the "great algebraist" whose masterpiece, the Trait\\'e des substitutions et des equations alg\\'ebriques, unfolded the group-theoretical content of \\'Evariste Galois's work. The present paper appeals to the database of the reviews of the Jahrbuch \\"uber die Fortschritte der Mathematik (1868-1942) for providing an overview of Jordan's works. On the one hand, we shall especially investigate the collective dimensions in which Jordan himself inscribed his works (1860-1922). On the other hand, we shall address the issue of the collectives in which Jordan's works have circulated (1860-1940). Moreover, the time-period during which Jordan has been publishing his works, i.e., 1860-1922, provides an opportunity to investigate some collective organizations of knowledge that pre-existed the development of object-oriented disciplines such as gr...

  5. New computer security measures

    CERN Multimedia

    IT Department

    2008-01-01

    As a part of the long-term strategy to improve computer security at CERN, and especially given the attention focused to CERN by the start-up of the LHC, two additional security measures concerning DNS and Tor will shortly be introduced. These are described in the following texts and will affect only a small number of users. "PHISHING" ATTACKS CONTINUE CERN computer users continue to be subjected to attacks by people trying to infect our machines and obtain passwords and other confidential information by social engineering trickery. Recent examples include an e-mail message sent from "La Poste" entitled "Colis Postal" on 21 August, a fake mail sent from web and mail services on 8 September, and an e-mail purporting to come from Hallmark Cards announcing the arrival of an electronic postcard. However, there are many other examples and there are reports of compromised mail accounts being used for more realistic site-specific phishing attempts. Given the increased publicity rela...

  6. Measurement control workshop instructional materials

    Energy Technology Data Exchange (ETDEWEB)

    Gibbs, Philip [Brookhaven National Lab. (BNL), Upton, NY (United States); Harvel, Charles [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Clark, John [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gregg Protection Services, Lynchburg, VA (United States)

    2011-12-01

    An essential element in an effective nuclear materials control and accountability (MC&A) program is the measurement of the nuclear material as it is received, moved, processed and shipped. Quality measurement systems and methodologies determine the accuracy of the accountability values. Implementation of a measurement control program is essential to ensure that the measurement systems and methodologies perform as expected. A measurement control program also allows for a determination of the level of confidence in the ac counting values.

  7. Measurement control workshop instructional materials

    Energy Technology Data Exchange (ETDEWEB)

    Gibbs, Philip [Brookhaven National Lab. (BNL), Upton, NY (United States); Harvel, Charles [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Clark, John [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gregg Protection Services, Lynchburg, VA (United States)

    2012-09-01

    An essential element in an effective nuclear materials control and accountability (MC&A) program is the measurement of the nuclear material as it is received, moved, processed and shipped. Quality measurement systems and methodologies determine the accuracy of the accountability values. Implementation of a measurement control program is essential to ensure that the measurement systems and methodologies perform as expected. A measurement control program also allows for a determination of the level of confidence in the accounting values.

  8. Time and Measurement Days

    Science.gov (United States)

    Scargle, Jeffrey D.

    2017-01-01

    Questions in data analysis involving the concepts of time and measurement are often pushed into the background or reserved for a philosophical discussion. Some examples are: a) Is causality a consequence of the laws of physics, or can the arrow of time be reversed? b) Can we determine the arrow of time of an event? c) Do we need the continuum hypothesis for the underlying function in any measurement process? d) Can we say anything about the analyticity of the underlying process of an event? e) Would it be valid to model a non-analytical process as function of time? f) What are the implications of all these questions for classical Fourier techniques? However, in the age of big data gathered either from space missions supplying ultra-precise long time series, or e.g. LIGO data from the ground, the moment to bring these questions to the foreground seems arrived. The limitations of our understanding of some fundamental processes is emphasized by the lack of solution for problems open for more than 2 decades, such as the non-detection of solar g-modes, or the modal identification of main sequence stellar pulsators like delta Scuti stars. Flicker noise or 1/f noise, for example, attributed in solar-like stars to granulation, is analyzed mostly only to apply noise reduction techniques, neither considering the classical problem of 1/f noise that was introduced a 100 years ago, nor taking into account ergodic or non-ergodic solutions that make inapplicable spectral analysis techniques in practice. This topic was discussed by Nicholas W. Watkins during the ITISE meeting held in Granada in 2016. There he presented preliminary results of his research on Mandelbrot's related work. We reproduce here his quotation of Mandelbrot (1999) "There is a sharp contrast between a highly anomalous ("non-white") noise that proceeds in ordinary clock time and a noise whose principal anomaly is that it is restricted to fractal time", suggesting a connection with the above proposed topics that

  9. Automating spectral measurements

    Science.gov (United States)

    Goldstein, Fred T.

    2008-09-01

    This paper discusses the architecture of software utilized in spectroscopic measurements. As optical coatings become more sophisticated, there is mounting need to automate data acquisition (DAQ) from spectrophotometers. Such need is exacerbated when 100% inspection is required, ancillary devices are utilized, cost reduction is crucial, or security is vital. While instrument manufacturers normally provide point-and-click DAQ software, an application programming interface (API) may be missing. In such cases automation is impossible or expensive. An API is typically provided in libraries (*.dll, *.ocx) which may be embedded in user-developed applications. Users can thereby implement DAQ automation in several Windows languages. Another possibility, developed by FTG as an alternative to instrument manufacturers' software, is the ActiveX application (*.exe). ActiveX, a component of many Windows applications, provides means for programming and interoperability. This architecture permits a point-and-click program to act as automation client and server. Excel, for example, can control and be controlled by DAQ applications. Most importantly, ActiveX permits ancillary devices such as barcode readers and XY-stages to be easily and economically integrated into scanning procedures. Since an ActiveX application has its own user-interface, it can be independently tested. The ActiveX application then runs (visibly or invisibly) under DAQ software control. Automation capabilities are accessed via a built-in spectro-BASIC language with industry-standard (VBA-compatible) syntax. Supplementing ActiveX, spectro-BASIC also includes auxiliary serial port commands for interfacing programmable logic controllers (PLC). A typical application is automatic filter handling.

  10. Measuring Extinction with ALE

    Science.gov (United States)

    Zimmer, Peter C.; McGraw, J. T.; Gimmestad, G. G.; Roberts, D.; Stewart, J.; Smith, J.; Fitch, J.

    2007-12-01

    ALE (Astronomical LIDAR for Extinction) is deployed at the University of New Mexico's (UNM) Campus Observatory in Albuquerque, NM. It has begun a year-long testing phase prior deployment at McDonald Observatory in support of the CCD/Transit Instrument II (CTI-II). ALE is designed to produce a high-precision measurement of atmospheric absorption and scattering above the observatory site every ten minutes of every moderately clear night. LIDAR (LIght Detection And Ranging) is the VIS/UV/IR analog of radar, using a laser, telescope and time-gated photodetector instead of a radio transmitter, dish and receiver. In the case of ALE -- an elastic backscatter LIDAR -- 20ns-long, eye-safe laser pulses are launched 2500 times per second from a 0.32m transmitting telescope co-mounted with a 50mm short-range receiver on an alt-az mounted 0.67m long-range receiver. Photons from the laser pulse are scattered and absorbed as the pulse propagates through the atmosphere, a portion of which are scattered into the field of view of the short- and long-range receiver telescopes and detected by a photomultiplier. The properties of a given volume of atmosphere along the LIDAR path are inferred from both the altitude-resolved backscatter signal as well as the attenuation of backscatter signal from altitudes above it. We present ALE profiles from the commissioning phase and demonstrate some of the astronomically interesting atmospheric information that can be gleaned from these data, including, but not limited to, total line-of-sight extinction. This project is funded by NSF Grant 0421087.

  11. Invariant Measures for Cherry Flows

    Science.gov (United States)

    Saghin, Radu; Vargas, Edson

    2013-01-01

    We investigate the invariant probability measures for Cherry flows, i.e. flows on the two-torus which have a saddle, a source, and no other fixed points, closed orbits or homoclinic orbits. In the case when the saddle is dissipative or conservative we show that the only invariant probability measures are the Dirac measures at the two fixed points, and the Dirac measure at the saddle is the physical measure. In the other case we prove that there exists also an invariant probability measure supported on the quasi-minimal set, we discuss some situations when this other invariant measure is the physical measure, and conjecture that this is always the case. The main techniques used are the study of the integrability of the return time with respect to the invariant measure of the return map to a closed transversal to the flow, and the study of the close returns near the saddle.

  12. Performance Measurement and Faculty Pay

    Institute of Scientific and Technical Information of China (English)

    LUO Pin-liang; RUI Ming-jie

    2002-01-01

    In classic agency models, first best efficiency can't be achieved due to the trade-off between risk and incentives except that agency is risk neutral. Whereas if the principal's objective is not contractible,an alternative objective performance measurement which is contractible is always proposed. However, if the reaction of this objective performance measurement to agency's effort differs from that of the principal's objective, the agent would game performance measures, which leads to loss of efficiency, even if agency is risk neutral. By adding subjective weights on objective measures, or combination of subjective performance measurement with objective performance measurement, efficiency can be regained. Implications for faculty pay are also discussed.

  13. Advanced (Measurement) Applications of Curriculum-Based Measurement in Reading

    Science.gov (United States)

    Petscher, Yaacov; Cummings, Kelli Dawn; Biancarosa, Gina; Fien, Hank

    2013-01-01

    The purpose of this article is to provide a commentary on the current state of several measurement issues pertaining to curriculum-based measures of reading (R-CBM). We begin by providing an overview of the utility of R-CBM, followed by a presentation of five specific measurements considerations: (a) the reliability of R-CBM oral reading fluency…

  14. Conformance Testing: Measurement Decision Rules

    Science.gov (United States)

    Mimbs, Scott M.

    2010-01-01

    The goal of a Quality Management System (QMS) as specified in ISO 9001 and AS9100 is to provide assurance to the customer that end products meet specifications. Measuring devices, often called measuring and test equipment (MTE), are used to provide the evidence of product conformity to specified requirements. Unfortunately, processes that employ MTE can become a weak link to the overall QMS if proper attention is not given to the measurement process design, capability, and implementation. Documented "decision rules" establish the requirements to ensure measurement processes provide the measurement data that supports the needs of the QMS. Measurement data are used to make the decisions that impact all areas of technology. Whether measurements support research, design, production, or maintenance, ensuring the data supports the decision is crucial. Measurement data quality can be critical to the resulting consequences of measurement-based decisions. Historically, most industries required simplistic, one-size-fits-all decision rules for measurements. One-size-fits-all rules in some cases are not rigorous enough to provide adequate measurement results, while in other cases are overly conservative and too costly to implement. Ideally, decision rules should be rigorous enough to match the criticality of the parameter being measured, while being flexible enough to be cost effective. The goal of a decision rule is to ensure that measurement processes provide data with a sufficient level of quality to support the decisions being made - no more, no less. This paper discusses the basic concepts of providing measurement-based evidence that end products meet specifications. Although relevant to all measurement-based conformance tests, the target audience is the MTE end-user, which is anyone using MTE other than calibration service providers. Topics include measurement fundamentals, the associated decision risks, verifying conformance to specifications, and basic measurement

  15. Precision Metrology Using Weak Measurements

    Science.gov (United States)

    Zhang, Lijian; Datta, Animesh; Walmsley, Ian A.

    2015-05-01

    Weak values and measurements have been proposed as a means to achieve dramatic enhancements in metrology based on the greatly increased range of possible measurement outcomes. Unfortunately, the very large values of measurement outcomes occur with highly suppressed probabilities. This raises three vital questions in weak-measurement-based metrology. Namely, (Q1) Does postselection enhance the measurement precision? (Q2) Does weak measurement offer better precision than strong measurement? (Q3) Is it possible to beat the standard quantum limit or to achieve the Heisenberg limit with weak measurement using only classical resources? We analyze these questions for two prototypical, and generic, measurement protocols and show that while the answers to the first two questions are negative for both protocols, the answer to the last is affirmative for measurements with phase-space interactions, and negative for configuration space interactions. Our results, particularly the ability of weak measurements to perform at par with strong measurements in some cases, are instructive for the design of weak-measurement-based protocols for quantum metrology.

  16. Precision metrology using weak measurements.

    Science.gov (United States)

    Zhang, Lijian; Datta, Animesh; Walmsley, Ian A

    2015-05-29

    Weak values and measurements have been proposed as a means to achieve dramatic enhancements in metrology based on the greatly increased range of possible measurement outcomes. Unfortunately, the very large values of measurement outcomes occur with highly suppressed probabilities. This raises three vital questions in weak-measurement-based metrology. Namely, (Q1) Does postselection enhance the measurement precision? (Q2) Does weak measurement offer better precision than strong measurement? (Q3) Is it possible to beat the standard quantum limit or to achieve the Heisenberg limit with weak measurement using only classical resources? We analyze these questions for two prototypical, and generic, measurement protocols and show that while the answers to the first two questions are negative for both protocols, the answer to the last is affirmative for measurements with phase-space interactions, and negative for configuration space interactions. Our results, particularly the ability of weak measurements to perform at par with strong measurements in some cases, are instructive for the design of weak-measurement-based protocols for quantum metrology.

  17. Protective Measurement and Quantum Reality

    Science.gov (United States)

    Gao, Shan

    2015-01-01

    1. Protective measurements: an introduction Shan Gao; Part I. Fundamentals and Applications: 2. Protective measurements of the wave function of a single system Lev Vaidman; 3. Protective measurement, postselection and the Heisenberg representation Yakir Aharonov and Eliahu Cohen; 4. Protective and state measurement: a review Gennaro Auletta; 5. Determination of the stationary basis from protective measurement on a single system Lajos Diósi; 6. Weak measurements, the energy-momentum tensor and the Bohm approach Robert Flack and Basil J. Hiley; Part II. Meanings and Implications: 7. Measurement and metaphysics Peter J. Lewis; 8. Protective measurements and the explanatory gambit Michael Dickson; 9. Realism and instrumentalism about the wave function: how should we choose? Mauro Dorato and Frederico Laudisa; 10. Protective measurements and the PBR theorem Guy Hetzroni and Daniel Rohrlich; 11. The roads not taken: empty waves, waveform collapse and protective measurement in quantum theory Peter Holland; 12. Implications of protective measurements on de Broglie-Bohm trajectories Aurelien Drezet; 13. Entanglement, scaling, and the meaning of the wave function in protective measurement Maximilian Schlosshauer and Tangereen V. B. Claringbold; 14. Protective measurements and the nature of the wave function within the primitive ontology approach Vincent Lam; 15. Reality and meaning of the wave function Shan Gao; Index.

  18. Measurement of autism: A review of four screening measures

    Directory of Open Access Journals (Sweden)

    Nishalie Fernandopulle

    2011-01-01

    Full Text Available Using a key word search on electronic databases, two relevant journals and relevant review references, four measures of autistic symptoms (Childhood Asperger Syndrome Test, Autism Behavior Checklist, Social Communication Questionnaire, Social Responsiveness Scale were reviewed with reference to their ability to discriminate the three major components of autism and measure across the whole spectrum of autism. None of the reviewed measures were able to effectively tap into and differentiate between all points on the spectrum. Further work is required to assess the sensitivity of the measures to independence between domains. The development of a measure sensitive to symptom change/continuity across development may be useful.

  19. Eddy Correlation Flux Measurement System

    Data.gov (United States)

    Oak Ridge National Laboratory — The eddy correlation (ECOR) flux measurement system provides in situ, half-hour measurements of the surface turbulent fluxes of momentum, sensible heat, latent heat,...

  20. Revuz measures under time change

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    In this paper, we shall study how energy functionals and Revuz measures change under time change of Markov processes and provide an intuitive and direct approach to the computation of the Levy system and jumping measure of time changed process.

  1. Invariant measures for Cherry flows

    CERN Document Server

    Saghin, Radu

    2011-01-01

    We investigate the invariant probability measures for Cherry flows, i.e. flows on the two-torus which have a saddle, a source, and no other fixed points, closed orbits or homoclinic orbits. In the case when the saddle is dissipative or conservative we show that the only invariant probability measures are the Dirac measures at the two fixed points, and the Dirac measure at the saddle is the physical measure. In the other case we discuss some situations when there exists another invariant measure supported on the quasi-minimal set, which is the physical measure, and conjecture that this is always the case. The main techniques used are the study of the integrability of the return time with respect to the invariant measure of the return map to a closed transversal to the flow, and the study of the close returns near the saddle.

  2. Measurement and probability a probabilistic theory of measurement with applications

    CERN Document Server

    Rossi, Giovanni Battista

    2014-01-01

    Measurement plays a fundamental role both in physical and behavioral sciences, as well as in engineering and technology: it is the link between abstract models and empirical reality and is a privileged method of gathering information from the real world. Is it possible to develop a single theory of measurement for the various domains of science and technology in which measurement is involved? This book takes the challenge by addressing the following main issues: What is the meaning of measurement? How do we measure? What can be measured? A theoretical framework that could truly be shared by scientists in different fields, ranging from physics and engineering to psychology is developed. The future in fact will require greater collaboration between science and technology and between different sciences. Measurement, which played a key role in the birth of modern science, can act as an essential interdisciplinary tool and language for this new scenario. A sound theoretical basis for addressing key problems in mea...

  3. Breathing detection with a portable impedance measurement system: first measurements.

    Science.gov (United States)

    Cordes, Axel; Foussier, Jerome; Leonhardt, Steffen

    2009-01-01

    For monitoring the health status of individuals, detection of breathing and heart activity is important. From an electrical point of view, it is known that breathing and heart activity change the electrical impedance distribution in the human body over the time due to ventilation (high impedance) and blood shifts (low impedance). Thus, it is possible to detect both important vital parameters by measuring the impedance of the thorax or the region around lung and heart. For some measurement scenarios it is also essential to detect these parameters contactless. For instance, monitoring bus drivers health could help to limit accidents, but directly connected systems limit the drivers free moving space. One measurement technology for measuring the impedance changes in the chest without cables is the magnetic impedance tomography (MIT). This article describes a portable measurement system we developed for this scenario that allows to measure breathing contactless. Furthermore, first measurements with five volunteers were performed and analyzed.

  4. Measures for Managing Operational Resilience

    Science.gov (United States)

    2011-07-01

    such as ITIL , COBIT, ISO2700x, BS25999, and PCI DSS, the measures may be useful for measuring security, business continuity, and IT operations...business continuity, and IT operations management processes because CERT-RMM practices map to bodies of knowledge and codes of practice such as ITIL ...of knowledge and codes of practice such as ITIL , COBIT, ISO2700x, BS25999, and PCI DSS, the measures may be useful for measuring security, business

  5. FIELD STRENGTH MEASUREMENTS, PHASE II.

    Science.gov (United States)

    The measurement of the strength of radio frequency fields at high frequency and above has followed practices which are standard for the measurement...of field strength at medium and low frequencies. Variability of measurements made in practical situations and a lack of reproducibility of...measurements made under apparently identical conditions has prompted an investigation of equipment and methods used in the determinations. The field strength

  6. Sequential measurements of conjugate observables

    Energy Technology Data Exchange (ETDEWEB)

    Carmeli, Claudio [Dipartimento di Fisica, Universita di Genova, Via Dodecaneso 33, 16146 Genova (Italy); Heinosaari, Teiko [Department of Physics and Astronomy, Turku Centre for Quantum Physics, University of Turku, 20014 Turku (Finland); Toigo, Alessandro, E-mail: claudio.carmeli@gmail.com, E-mail: teiko.heinosaari@utu.fi, E-mail: alessandro.toigo@polimi.it [Dipartimento di Matematica ' Francesco Brioschi' , Politecnico di Milano, Piazza Leonardo da Vinci 32, 20133 Milano (Italy)

    2011-07-15

    We present a unified treatment of sequential measurements of two conjugate observables. Our approach is to derive a mathematical structure theorem for all the relevant covariant instruments. As a consequence of this result, we show that every Weyl-Heisenberg covariant observable can be implemented as a sequential measurement of two conjugate observables. This method is applicable both in finite- and infinite-dimensional Hilbert spaces, therefore covering sequential spin component measurements as well as position-momentum sequential measurements.

  7. The thermodynamic cost of measurements

    OpenAIRE

    Granger, Léo; Kantz, Holger

    2011-01-01

    The measurement of thermal fluctuations provides information about the microscopic state of a thermodynamic system and can be used in order to extract work from a single heat bath in a suitable cyclic process. We present a minimal framework for the modeling of a measurement device and we propose a protocol for the measurement of thermal fluctuations. In this framework, the measurement of thermal fluctuations naturally leads to the dissipation of work. We illustrate this framework on a simple ...

  8. Measuring downside risk - realised semivariance

    DEFF Research Database (Denmark)

    Barndorff-Nielsen, Ole; Kinnebrock, Silja; Shephard, Neil

    We propose a new measure of risk, based entirely on downwards moves measured using high frequency data. Realised semivariances are shown to have important predictive qualities for future market volatility. The theory of these new measures is spelt out, drawing on some new results from probability...

  9. Terahertz radar cross section measurements

    DEFF Research Database (Denmark)

    Iwaszczuk, Krzysztof; Heiselberg, Henning; Jepsen, Peter Uhd

    2010-01-01

    We perform angle- and frequency-resolved radar cross section (RCS) measurements on objects at terahertz frequencies. Our RCS measurements are performed on a scale model aircraft of size 5-10 cm in polar and azimuthal configurations, and correspond closely to RCS measurements with conventional radar...

  10. Measuring human behaviour with radar

    NARCIS (Netherlands)

    Dorp, Ph. van

    2001-01-01

    The paper presents human motion measurements with the experimental Frequency Modulated Continuous Wave(FMCW) radar at TNO-FEL. The aim of these measurements is to analyse the Doppler velocity spectrum of humans. These analysis give insight in measuring human behaviour with radar for security applica

  11. The Logic of Quantum Measurements

    Science.gov (United States)

    Vanni, Leonardo; Laura, Roberto

    2013-07-01

    We apply our previously developed formalism of contexts of histories, suitable to deal with quantum properties at different times, to the measurement process. We explore the logical implications which are allowed by the quantum theory, about the realization of properties of the microscopic measured system, before and after the measurement process with a given pointer value.

  12. Measure theory of statistical convergence

    Institute of Scientific and Technical Information of China (English)

    CHENG LiXin; LIN GuoChen; LAN YongYi; LIU Hui

    2008-01-01

    The question of establishing measure theory for statistical convergence has been moving closer to center stage, since a kind of reasonable theory is not only fundamental for unifying various kinds of statistical convergence, but also a bridge linking the studies of statistical convergence across measure theory, integration theory, probability and statistics. For this reason, this paper, in terms of subdifferential, first shows a representation theorem for all finitely additive probability measures defined on the σ-algebra of all subsets of N, and proves that every such measure can be uniquely decomposed into a convex combination of a countably additive probability measure and a statistical measure (i.e. a finitely additive probability measure μ with μ(k) = 0 for all singletons {k}). This paper also shows that classical statistical measures have many nice properties, such as: The set of all such measures endowed with the topology of point-wise convergence on forms a compact convex Hausdorff space; every classical statistical measure is of continuity type (hence, atomless), and every specific class of statistical measures fits a complementation minimax rule for every subset in N. Finally, this paper shows that every kind of statistical convergence can be unified in convergence of statistical measures.

  13. PROBLEMS IN MEASURING CUSTOMER SATISFACTION

    OpenAIRE

    Isac Florin Lucian; Rusu Sergiu; Cureteanu Radu Silviu

    2012-01-01

    Companies that embrace client orientation are preoccupied by measuring the level of satisfaction of those who consume their products or utilizes their products. That is why, customer satisfaction has to be transposed in measurable parameters that can be understood and influenced. Nevertheless, measuring customer satisfaction involves a lot of problems.

  14. PROBLEMS IN MEASURING CUSTOMER SATISFACTION

    Directory of Open Access Journals (Sweden)

    Isac Florin Lucian

    2012-12-01

    Full Text Available Companies that embrace client orientation are preoccupied by measuring the level of satisfaction of those who consume their products or utilizes their products. That is why, customer satisfaction has to be transposed in measurable parameters that can be understood and influenced. Nevertheless, measuring customer satisfaction involves a lot of problems.

  15. Challenges in Measuring Teachers' Knowledge

    Science.gov (United States)

    Fauskanger, Janne

    2015-01-01

    Mathematical knowledge for teaching (MKT) measures have been widely adopted by researchers. Critics have debated the value of such measures and questioned the type of knowledge that these access. This article reports on a study where the challenges in measuring teachers' knowledge were illuminated through investigating relationships between the…

  16. Measure theory of statistical convergence

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The question of establishing measure theory for statistical convergence has been moving closer to center stage, since a kind of reasonable theory is not only fundamental for unifying various kinds of statistical convergence, but also a bridge linking the studies of statistical convergence across measure theory, integration theory, probability and statistics. For this reason, this paper, in terms of subdifferential, first shows a representation theorem for all finitely additive probability measures defined on the σ-algebra A of all subsets of N, and proves that every such measure can be uniquely decomposed into a convex combination of a countably additive probability measure and a statistical measure (i.e. a finitely additive probability measure μ with μ(k) = 0 for all singletons {k}). This paper also shows that classical statistical measures have many nice properties, such as: The set S of all such measures endowed with the topology of point-wise convergence on A forms a compact convex Hausdorff space; every classical statistical measure is of continuity type (hence, atomless), and every specific class of statistical measures fits a complementation minimax rule for every subset in N. Finally, this paper shows that every kind of statistical convergence can be unified in convergence of statistical measures.

  17. Measurement System and Calibration report

    DEFF Research Database (Denmark)

    Kock, Carsten Weber; Vesth, Allan

    This Measurement System & Calibration report is describing DTU’s measurement system installed at a specific wind turbine. A major part of the sensors has been installed by others (see [1]) the rest of the sensors have been installed by DTU. The results of the measurements, described in this report...

  18. Measurement System and Calibration report

    DEFF Research Database (Denmark)

    Vesth, Allan; Kock, Carsten Weber

    The report describes power curve measurements carried out on a given wind turbine. The measurements are carried out in accordance to Ref. [1]. A site calibration has been carried out; see Ref. [2], and the measured flow correction factors for different wind directions are used in the present...

  19. Stationary Measure in the Multiverse

    OpenAIRE

    Linde, Andrei; Vanchurin, Vitaly; Winitzki, Sergei

    2008-01-01

    We study the recently proposed "stationary measure" in the context of the string landscape scenario. We show that it suffers neither from the "Boltzmann brain" problem nor from the "youngness" paradox that makes some other measures predict a high CMB temperature at present. We also demonstrate a satisfactory performance of this measure in predicting the results of local experiments, such as proton decay.

  20. Measurement System and Calibration report

    DEFF Research Database (Denmark)

    Gómez Arranz, Paula; Villanueva, Héctor

    This Measurement System & Calibration report is describing DTU’s measurement system installed at a specific wind turbine. A major part of the sensors has been installed by others (see [1]) the rest of the sensors have been installed by DTU. The results of the measurements, described in this repor...

  1. First mass measurement at JYFLTRAP

    Energy Technology Data Exchange (ETDEWEB)

    Jokinen, A. [Department of Physics, PB 35 (YFL), FIN-40014 University of Jyvaeskylae (Finland); Eronen, T. [Department of Physics, PB 35 (YFL), FIN-40014 University of Jyvaeskylae (Finland); Hager, U. [Department of Physics, PB 35 (YFL), FIN-40014 University of Jyvaeskylae (Finland); Hakala, J. [Department of Physics, PB 35 (YFL), FIN-40014 University of Jyvaeskylae (Finland); Kolhinen, V. [Department of Physics, PB 35 (YFL), FIN-40014 University of Jyvaeskylae (Finland); Kopecky, S. [Department of Physics, PB 35 (YFL), FIN-40014 University of Jyvaeskylae (Finland); Rinta-Antila, S. [Department of Physics, PB 35 (YFL), FIN-40014 University of Jyvaeskylae (Finland); Szerypo, J. [Department of Physics, PB 35 (YFL), FIN-40014 University of Jyvaeskylae (Finland); Aeystoe, J. [Department of Physics, PB 35 (YFL), FIN-40014 University of Jyvaeskylae (Finland)

    2004-12-27

    The first mass measurements at JYFLTRAP facility are reviewed. Those are also first ever direct mass measurements of the heaviest Zr-isotopes. Results are compared to atomic mass evaluation data and the recent calculations. The first TOF-resonances from high-precision trap and an implication to high-precision mass measurements are discussed.

  2. Measurements on Container Load Trailer

    DEFF Research Database (Denmark)

    Brincker, Rune; Hansen, Lars Pilegaard

    This report describes a series of measurements carried out for Danish Camp Supply (DCS), Nørre Sundby, Denmark during January and February 1990. The test series was departed into three sessions: the first pilot measurement session made on Friday 26. of January, the second pilot measurement made o...

  3. Measure Synchronization on Symplectic Map

    Institute of Scientific and Technical Information of China (English)

    CHEN Shao-Ying; XU Hai-Bo; WANG Guang-Rui; CHEN Shi-Gang

    2004-01-01

    Measure synchronization in coupled Hamiltonian systems is a novel synchronization phenomenon. The measure synchronization on symplectic map is observed numerically, for identical coupled systems with different parameters. We have found the properties of the characteristic frequency and the amplitude of phase locking in regular motion when the measure synchronization of coupled systems is obtained. The relations between the change of the largest Lyapunov exponent and the course of phase desynchronization are also discussed in coupled systems, some useful results are obtained. A new approach is proposed for describing the measure synchronization of coupled systems numerically,which is advantage in judging the measure synchronization, especially for the coupled systems in nonregular region.

  4. The W Boson Mass Measurement

    Science.gov (United States)

    Kotwal, Ashutosh V.

    2016-10-01

    The measurement of the W boson mass has been growing in importance as its precision has improved, along with the precision of other electroweak observables and the top quark mass. Over the last decade, the measurement of the W boson mass has been led at hadron colliders. Combined with the precise measurement of the top quark mass at hadron colliders, the W boson mass helped to pin down the mass of the Standard Model Higgs boson through its induced radiative correction on the W boson mass. With the discovery of the Higgs boson and the measurement of its mass, the electroweak sector of the Standard Model is over-constrained. Increasing the precision of the W boson mass probes new physics at the TeV-scale. We summarize an extensive Tevatron (1984-2011) program to measure the W boson mass at the CDF and Dø experiments. We highlight the recent Tevatron measurements and prospects for the final Tevatron measurements.

  5. The Politics of Performance Measurement

    DEFF Research Database (Denmark)

    Bjørnholt, Bente; Larsen, Flemming

    2014-01-01

    Performance measurements are meant to improve public decision making and organizational performance. But performance measurements are far from always rational tools for problem solving, they are also political instruments. The central question addressed in this article is how performance...... measurement affects public policy. The aim is to conceptualize the political consequences of performance measurements and of special concern is how performance systems influence how political decisions are made, what kind of political decisions are conceivable, and how they are implemented. The literature...... on the utilization of evaluation and performance measurements is applied to analyse how performance measurements affect the political process of goal-setting, implementation and learning. The article concludes that performance measurements may have intended and unintended effects and they seem to have a retroactive...

  6. The W Boson Mass Measurement

    CERN Document Server

    Kotwal, Ashutosh V

    2016-01-01

    The measurement of the W boson mass has been growing in importance as its precision has improved, along with the precision of other electroweak observables and the top quark mass. Over the last decade, the measurement of the W boson mass has been led at hadron colliders. Combined with the precise measurement of the top quark mass at hadron colliders, the W boson mass helped to pin down the mass of the Standard Model Higgs boson through its induced radiative correction on the W boson mass. With the discovery of the Higgs boson and the measurement of its mass, the electroweak sector of the Standard Model is over-constrained. Increasing the precision of the W boson mass probes new physics at the TeV-scale. We summarize an extensive Tevatron (1984–2011) program to measure the W boson mass at the CDF and Dø experiments. We highlight the recent Tevatron measurements and prospects for the final Tevatron measurements.

  7. Modern measurements fundamentals and applications

    CERN Document Server

    Petri, D; Carbone, P; Catelani, M

    2015-01-01

    This book explores the modern role of measurement science for both the technically most advanced applications and in everyday and will help readers gain the necessary skills to specialize their knowledge for a specific field in measurement. Modern Measurements is divided into two parts. Part I (Fundamentals) presents a model of the modern measurement activity and the already recalled fundamental bricks. It starts with a general description that introduces these bricks and the uncertainty concept. The next chapters provide an overview of these bricks and finishes (Chapter 7) with a more general and complex model that encompasses both traditional (hard) measurements and (soft) measurements, aimed at quantifying non-physical concepts, such as quality, satisfaction, comfort, etc. Part II (Applications) is aimed at showing how the concepts presented in Part I can be usefully applied to design and implement measurements in some very impor ant and broad fields. The editors cover System Identification (Chapter 8...

  8. Redundant measurements for controlling errors

    Energy Technology Data Exchange (ETDEWEB)

    Ehinger, M. H.; Crawford, J. M.; Madeen, M. L.

    1979-07-01

    Current federal regulations for nuclear materials control require consideration of operating data as part of the quality control program and limits of error propagation. Recent work at the BNFP has revealed that operating data are subject to a number of measurement problems which are very difficult to detect and even more difficult to correct in a timely manner. Thus error estimates based on operational data reflect those problems. During the FY 1978 and FY 1979 R and D demonstration runs at the BNFP, redundant measurement techniques were shown to be effective in detecting these problems to allow corrective action. The net effect is a reduction in measurement errors and a significant increase in measurement sensitivity. Results show that normal operation process control measurements, in conjunction with routine accountability measurements, are sensitive problem indicators when incorporated in a redundant measurement program.

  9. Graph measures and network robustness

    CERN Document Server

    Ellens, W

    2013-01-01

    Network robustness research aims at finding a measure to quantify network robustness. Once such a measure has been established, we will be able to compare networks, to improve existing networks and to design new networks that are able to continue to perform well when it is subject to failures or attacks. In this paper we survey a large amount of robustness measures on simple, undirected and unweighted graphs, in order to offer a tool for network administrators to evaluate and improve the robustness of their network. The measures discussed in this paper are based on the concepts of connectivity (including reliability polynomials), distance, betweenness and clustering. Some other measures are notions from spectral graph theory, more precisely, they are functions of the Laplacian eigenvalues. In addition to surveying these graph measures, the paper also contains a discussion of their functionality as a measure for topological network robustness.

  10. Unified entropic measures of quantum correlations induced by local measurements

    Science.gov (United States)

    Bosyk, G. M.; Bellomo, G.; Zozor, S.; Portesi, M.; Lamberti, P. W.

    2016-11-01

    We introduce quantum correlation measures based on the minimal change in unified entropies induced by local rank-one projective measurements, divided by a factor that depends on the generalized purity of the system in the case of nonadditive entropies. In this way, we overcome the issue of the artificial increasing of the value of quantum correlation measures based on nonadditive entropies when an uncorrelated ancilla is appended to the system, without changing the computability of our entropic correlation measures with respect to the previous ones. Moreover, we recover as limiting cases the quantum correlation measures based on von Neumann and Rényi entropies (i.e., additive entropies), for which the adjustment factor becomes trivial. In addition, we distinguish between total and semiquantum correlations and obtain some inequalities between them. Finally, we obtain analytical expressions of the entropic correlation measures for typical quantum bipartite systems.

  11. Measuring leadership: measuring what counts for succession planning.

    Science.gov (United States)

    Corso, John A

    2002-12-01

    Organizations tend to favor measures of near-term, tangible achievement at the expense of long-term, intangible capacities such as leadership. Succession planning, which is intimately tied to measures of leadership competencies and leadership development, suffers as a result of this tendency. Effective planning requires senior managers to be willing to invest in the measurement needed to gauge where the organization stands with respect to future leadership requirements.

  12. A new measurement method for ultrasonic surface roughness measurements

    DEFF Research Database (Denmark)

    Forouzbakhsh, Farshid; Rezanejad Gatabi, Javad; Rezanejad Gatabi, Iman

    2008-01-01

    This study proposes the application of Doppler-based ultrasonic method to surface roughness measurements. The fabricated prototype measures the slope of the under-test surface at small holes to evaluate the roughing parameters and this makes for more precise measurement. The device comprises...... at the reflecting point. The relationship between the Doppler shift and the roughing slope is mathematically analyzed. Compared to the transit-time based techniques, the dependency of the sensor on the sound speed in air is decreased by a factor of 2 and therefore a more precise measurement is achieved...

  13. Attempting Measurement of Psychological Attributes

    Directory of Open Access Journals (Sweden)

    Thomas eSalzberger

    2013-02-01

    Full Text Available Measures of psychological attributes abound in the social sciences as much as measures of physical properties do in the physical sciences. However, there are crucial differences between the scientific underpinning of measurement. While measurement in the physical sciences is supported by empirical evidence that demonstrates the quantitative nature of the property assessed, measurement in the social sciences is, in large part, made possible only by a vague, discretionary definition of measurement that places hardly any restrictions on empirical data. Traditional psychometric analyses fail to address the requirements of measurement as defined more rigorously in the physical sciences. The construct definitions do not allow for testable predications; and content validity becomes a matter of judgment. In order to improve measurement of psychological attributes, it is suggested to, first, readopt the definition of measurement in the physical sciences; second, to devise an elaborate theory of the construct to be measured that includes the hypothesis of a quantitative attribute; and third, to test the data for the structure implied by the hypothesis of quantity as well as predictions derived from the theory of the construct.

  14. Imaging FTIR emissivity measurement method

    Science.gov (United States)

    Burdette, Edward M.; Nichols, C. Spencer; Lane, Sarah E.; Prussing, Keith F.; Cathcart, J. Michael

    2013-09-01

    Though many materials behave approximately as greybodies across the long-wave infrared (LWIR) waveband, certain important infrared (IR) scene modeling materials such as brick and galvanized steel exhibit more complex optical properties1. Accurately describing how non-greybody materials interact relies critically on the accurate incorporation of the emissive and reflective properties of the in-scene materials. Typically, measured values are obtained and used. When measured using a non-imaging spectrometer, a given material's spectral emissivity requires more than one collection episode, as both the sample under test and a standard must be measured separately. In the interval between episodes changes in environment degrade emissivity measurement accuracy. While repeating and averaging measurements of the standard and sample helps mitigate such effects, a simultaneous measurement of both can ensure identical environmental conditions during the measurement process, thus reducing inaccuracies and delivering a temporally accurate determination of background or `down-welling' radiation. We report on a method for minimizing temporal inaccuracies in sample emissivity measurements. Using a LWIR hyperspectral imager, a Telops Hyper-Cam2, an approach permitting hundreds of simultaneous, calibrated spectral radiance measurements of the sample under test as well as a diffuse gold standard is described. In addition, we describe the data reduction technique to exploit these measurements. Following development of the reported method, spectral reflectance data from 10 samples of various materials of interest were collected. These data are presented along with comments on how such data will enhance the fidelity of computer models of IR scenes.

  15. Radiometry of water turbidity measurements

    Science.gov (United States)

    Mccluney, W. R.

    1974-01-01

    An examination of a number of measurements of turbidity reported in the literature reveals considerable variability in the definitions, units, and measurement techniques used. Many of these measurements differ radically in the optical quantity measured. The radiometric basis of each of the most common definitions of turbidity is examined. Several commercially available turbidimeters are described and their principles of operation are evaluated radiometrically. It is recommended that the term turbidity be restricted to measurements based upon the light scattered by the sample with that scattered by standard suspensions of known turbidity. It is also recommended that the measurement procedure be standardized by requiring the use of Formazin as the turbidity standardizing material and that the Formazin Turbidity Unit (FTU) be adopted as the standard unit of turbidity.

  16. Measuring Antimatter Gravity with Muonium

    CERN Document Server

    Kaplan, Daniel M; Mancini, Derrick; Phillips, James D; Phillips, Thomas J; Roberts, Thomas J; Terry, Jeff

    2014-01-01

    The gravitational acceleration of antimatter, $\\bar{g}$, has never been directly measured and could bear importantly on our understanding of gravity, the possible existence of a fifth force, and the nature and early history of the universe. Only two avenues for such a measurement appear to be feasible: antihydrogen and muonium. The muonium measurement requires a novel, monoenergetic, low-velocity, horizontal muonium beam directed at an atom interferometer. The precision three-grating interferometer can be produced in silicon nitride or ultrananocrystalline diamond using state-of-the-art nanofabrication. The required precision alignment and calibration at the picometer level also appear to be feasible. With 100 nm grating pitch, a 10% measurement of $\\bar{g}$ can be made using some months of surface-muon beam time, and a 1% or better measurement with a correspondingly larger exposure. This could constitute the first gravitational measurement of leptonic matter, of 2nd-generation matter and, possibly, the first...

  17. Microwave Impedance Measurement for Nanoelectronics

    Directory of Open Access Journals (Sweden)

    M. Randus

    2011-04-01

    Full Text Available The rapid progress in nanoelectronics showed an urgent need for microwave measurement of impedances extremely different from the 50Ω reference impedance of measurement instruments. In commonly used methods input impedance or admittance of a device under test (DUT is derived from measured value of its reflection coefficient causing serious accuracy problems for very high and very low impedances due to insufficient sensitivity of the reflection coefficient to impedance of the DUT. This paper brings theoretical description and experimental verification of a method developed especially for measurement of extreme impedances. The method can significantly improve measurement sensitivity and reduce errors caused by the VNA. It is based on subtraction (or addition of a reference reflection coefficient and the reflection coefficient of the DUT by a passive network, amplifying the resulting signal by an amplifier and measuring the amplified signal as a transmission coefficient by a common vector network analyzer (VNA. A suitable calibration technique is also presented.

  18. Outcome measures of antidepressive therapy.

    Science.gov (United States)

    Rosenberg, R

    2000-01-01

    A variety of outcome measures assessing antidepressive therapy are available. However, in randomized clinical trials, the Hamilton Rating Scale for Depression (HAM-D) is often the primary outcome measure. Results from factor analysis and Rasch item analysis indicate that the HAM-D is heterogeneous and that the sum of items scores may not be an adequate measure of the severity of depression. A Melancholia Scale of 11 items has been suggested as a more valid measure of the core symptoms of affective syndrome. Other global outcome measures, focusing on health-related quality of life issues and on social functioning as well as macro-economic analyses are also used in depression. Applying stringent and well-documented outcome measures in randomized clinical trials of antidepressants may give the clinician a better indication of the most appropriate drug for treatment of the individual patient.

  19. LAND MEASUREMENT IN HOLY BOOKS

    Directory of Open Access Journals (Sweden)

    Ion Nelu Leu

    2012-12-01

    Full Text Available Data and facts presented here will show measurement methods for time, land, buildings and first map designs of Israel County used during time. There are also described the instruments and measurement units used to perform these types of measurements, like the plot of land, the cubit, the mason string, the cane and the pole. Like any scientific approach, the land measurement domain begins with training specialists to elaborate all projects needed. This can be done “with the help of the Holy Ghost that gives us wisdom, skills and patience”, like those that made the Tent of God, the Temple of God and the surroundings, House of Solomon and others. All measurement methods are presented and supported with quotations from the Holy Book. In the end there are presented the modern equivalents for these antique measure units for weight, length, capacity and coins mentioned in the Old and New Testament.

  20. Recommended Practices in Thrust Measurements

    Science.gov (United States)

    Polk, James E.; Pancotti, Anthony; Haag, Thomas; King, Scott; Walker, Mitchell; Blakely, Joseph; Ziemer, John

    2013-01-01

    Accurate, direct measurement of thrust or impulse is one of the most critical elements of electric thruster characterization, and one of the most difficult measurements to make. The American Institute of Aeronautics and Astronautics has started an initiative to develop standards for many important measurement processes in electric propulsion, including thrust measurements. This paper summarizes recommended practices for the design, calibration, and operation of pendulum thrust stands, which are widely recognized as the best approach for measuring micro N- to mN-level thrust and micro Ns-level impulse bits. The fundamentals of pendulum thrust stand operation are reviewed, along with its implementation in hanging pendulum, inverted pendulum, and torsional balance configurations. Methods of calibration and recommendations for calibration processes are presented. Sources of error are identified and methods for data processing and uncertainty analysis are discussed. This review is intended to be the first step toward a recommended practices document to help the community produce high quality thrust measurements.

  1. Construct Measurement in Management Research

    DEFF Research Database (Denmark)

    Nielsen, Bo Bernhard

    2014-01-01

    Far too often do management scholars resort to crude and often inappropriate measures of fundamental constructs in their research; an approach which calls in question the interpretation and validity of their findings. Scholars often legitimize poor choices in measurement with a lack of availability...... of better measures and/or that they are simply following existing research in adopting previously published measures without critically assessing the validity, appropriateness, and applicability of such measures in terms of the focal study. Motivated by a recent dialog in Journal of Business Research......, this research note raises important questions about the use of proxies in management research and argues for greater care in operationalizing constructs with particular attention to matching levels of theory and measurement....

  2. Measurement Properties of Instruments for Measuring of Lymphedema: Systematic Review

    NARCIS (Netherlands)

    Hidding, J.T.; Viehoff, P.B.; Beurskens, C.H.G.; Laarhoven, H.W. van; Sanden, M.W. van der; Wees, P.J. van der

    2016-01-01

    BACKGROUND: Lymphedema is a common complication of cancer treatment, resulting in swelling and subjective symptoms. Reliable and valid measurement of this side effect of medical treatment is important. PURPOSE: The purpose of this study was to provide best evidence regarding which measurement

  3. Measuring School Climate: An Overview of Measurement Scales

    Science.gov (United States)

    Kohl, Diane; Recchia, Sophie; Steffgen, Georges

    2013-01-01

    Background: School climate is a heterogeneous concept with a multitude of standardised and validated instruments available to measure it. Purpose: This overview of measurement scales aims to provide researchers with short summaries of some of the self-report instruments in existence, especially in relation to the link between school climate and…

  4. Measuring School Climate: An Overview of Measurement Scales

    Science.gov (United States)

    Kohl, Diane; Recchia, Sophie; Steffgen, Georges

    2013-01-01

    Background: School climate is a heterogeneous concept with a multitude of standardised and validated instruments available to measure it. Purpose: This overview of measurement scales aims to provide researchers with short summaries of some of the self-report instruments in existence, especially in relation to the link between school climate and…

  5. Entropy of phase measurement quantum phase via quadrature measurement

    CERN Document Server

    My, R; My, Robert; Uni, Palacky

    1995-01-01

    The content of phase information of an arbitrary phase--sensitive measurement is evaluated using the maximum likelihood estimation. The phase distribution is characterized by the relative entropy--a nonlinear functional of input quantum state. As an explicit example the multiple measurement of quadrature operator is interpreted as quantum phase detection achieving the ultimate resolution predicted by the Fisher information.

  6. Getting the Measure of Measurement: Global Educational Opportunity

    Science.gov (United States)

    Enslin, Penny; Tjiattas, Mary

    2017-01-01

    Although measurement is widely misused in education, it is indispensable in addressing the problems of injustice in global educational opportunity. Considering how the case can be made for legitimate use of measurement in normative analysis and argument, we explore ways in which metrics have featured in the formulation of theories of justice, with…

  7. Measurement-only topological quantum computation without forced measurements

    Science.gov (United States)

    Zheng, Huaixiu; Dua, Arpit; Jiang, Liang

    2016-12-01

    We investigate the measurement-only topological quantum computation (MOTQC) approach proposed by Bonderson et al (2008 Phys. Rev. Lett. 101 010501) where the braiding operation is shown to be equivalent to a series of topological charge ‘forced measurements’ of anyons. In a forced measurement, the charge measurement is forced to yield the desired outcome (e.g. charge 0) via repeatedly measuring charges in different bases. This is a probabilistic process with a certain success probability for each trial. In practice, the number of measurements needed will vary from run to run. We show that such an uncertainty associated with forced measurements can be removed by simulating the braiding operation using a fixed number of three measurements supplemented by a correction operator. Furthermore, we demonstrate that in practice we can avoid applying the correction operator in hardware by implementing it in software. Our findings greatly simplify the MOTQC proposal and only require the capability of performing charge measurements to implement topologically protected transformations generated by braiding exchanges without physically moving anyons.

  8. Time variance effects and measurement error indications for MLS measurements

    DEFF Research Database (Denmark)

    Liu, Jiyuan

    1999-01-01

    Mathematical characteristics of Maximum-Length-Sequences are discussed, and effects of measuring on slightly time-varying systems with the MLS method are examined with computer simulations with MATLAB. A new coherence measure is suggested for the indication of time-variance effects. The results...... of the simulations show that the proposed MLS coherence can give an indication of time-variance effects....

  9. Antiproton compression and radial measurements

    Science.gov (United States)

    Andresen, G. B.; Bertsche, W.; Bowe, P. D.; Bray, C. C.; Butler, E.; Cesar, C. L.; Chapman, S.; Charlton, M.; Fajans, J.; Fujiwara, M. C.; Funakoshi, R.; Gill, D. R.; Hangst, J. S.; Hardy, W. N.; Hayano, R. S.; Hayden, M. E.; Humphries, A. J.; Hydomako, R.; Jenkins, M. J.; Jørgensen, L. V.; Kurchaninov, L.; Lambo, R.; Madsen, N.; Nolan, P.; Olchanski, K.; Olin, A.; Page, R. D.; Povilus, A.; Pusa, P.; Robicheaux, F.; Sarid, E.; El Nasr, S. Seif; Silveira, D. M.; Storey, J. W.; Thompson, R. I.; van der Werf, D. P.; Wurtele, J. S.; Yamazaki, Y.

    2008-08-01

    Control of the radial profile of trapped antiproton clouds is critical to trapping antihydrogen. We report detailed measurements of the radial manipulation of antiproton clouds, including areal density compressions by factors as large as ten, achieved by manipulating spatially overlapped electron plasmas. We show detailed measurements of the near-axis antiproton radial profile, and its relation to that of the electron plasma. We also measure the outer radial profile by ejecting antiprotons to the trap wall using an octupole magnet.

  10. 3 - Dimensional Body Measurement Technology

    Institute of Scientific and Technical Information of China (English)

    ZHOU Xu-dong; LI Yan-mei

    2002-01-01

    3 - dimensional body measurement technology, the basis of developing high technology in industry, accelerates digital development of aplparel industry. This paper briefly introduces the history of 3 - dimensional body measurement technology, and recounts the principle and primary structure of some types of 3 - dimensional automatic body measurement system. With this understanding, it discusses prospect of 3- dimensional CAD and virtual technology used in apparel industry.

  11. Child Poverty: Definition and Measurement.

    Science.gov (United States)

    Short, Kathleen S

    2016-04-01

    This article provides a discussion of what we mean when we refer to 'child poverty.' Many images come to mind when we discuss child poverty, but when we try to measure and quantify the extent of child poverty, we often use a very narrow concept. In this article a variety of poverty measures that are used in the United States are described and some of the differences between those measures are illustrated. In this article 3 measures are explored in detail: a relative measure of poverty that is used more often in an international context, the official US poverty measure, and a new supplemental poverty measure (SPM). The new measure differs from the other 2 because it takes into account noncash benefits that are provided to poor families. These include nutrition assistance such as food stamps, subsidized housing, and home energy assistance. The SPM also takes account of necessary expenses that families face, such as taxes and expenses related to work and health care. Comparing estimates for 2012, the SPM showed lower poverty rates for children than the other 2 measures. Because noncash benefits help those in extreme poverty, there were also lower percentages of children in extreme poverty with resources below half the SPM threshold. These results suggest that 2 important measures of poverty, the relative measure used in international comparisons, and the official poverty measure, are not able to gauge the effect of government programs on the alleviation of poverty, and the SPM illustrates that noncash benefits do help families meet their basic needs. Published by Elsevier Inc.

  12. Thermal measurements and inverse techniques

    CERN Document Server

    Orlande, Helcio RB; Maillet, Denis; Cotta, Renato M

    2011-01-01

    With its uncommon presentation of instructional material regarding mathematical modeling, measurements, and solution of inverse problems, Thermal Measurements and Inverse Techniques is a one-stop reference for those dealing with various aspects of heat transfer. Progress in mathematical modeling of complex industrial and environmental systems has enabled numerical simulations of most physical phenomena. In addition, recent advances in thermal instrumentation and heat transfer modeling have improved experimental procedures and indirect measurements for heat transfer research of both natural phe

  13. Measurements of Jets in ALICE

    CERN Document Server

    Nattrass, Christine

    2016-01-01

    The ALICE detector can be used for measurements of jets in pp , p Pb, and Pb–Pb collisions. Measurements of jets in pp collisions are consis- tent with expectations from perturbative calculations and jets in p Pb scale with the number of nucleon–nucleon collisions, indicating that cold nuclear matter effects are not observed for jets. Measurements in Pb–Pb collisions demonstrate suppression of jets relative to expectations from binary scaling to the equivalent number of nucleon–nucleon collisions

  14. Measurement, instrumentation, and sensors handbook

    CERN Document Server

    Eren, Halit

    2014-01-01

    The Second Edition of the bestselling Measurement, Instrumentation, and Sensors Handbook brings together all aspects of the design and implementation of measurement, instrumentation, and sensors. Reflecting the current state of the art, it describes the use of instruments and techniques for performing practical measurements in engineering, physics, chemistry, and the life sciences and discusses processing systems, automatic data acquisition, reduction and analysis, operation characteristics, accuracy, errors, calibrations, and the incorporation of standards for control purposes. Organized acco

  15. Strategies for measuring machine consciousness

    OpenAIRE

    2009-01-01

    The accurate measurement of the level of consciousness of a creature remains a major scientific challenge, nevertheless a number of new accounts that attempt to address this problem have been proposed recently. In this paper we analyze the principles of these new measures of consciousness along with other classical approaches focusing on their applicability to Machine Consciousness (MC). Furthermore, we propose a set of requirements of what we think a suitable measure for MC should be, discus...

  16. Stationary measure in the multiverse

    Energy Technology Data Exchange (ETDEWEB)

    Linde, Andrei [Department of Physics, Stanford University, Stanford, CA 94305 (United States); Vanchurin, Vitaly; Winitzki, Sergei, E-mail: alinde@stanford.edu, E-mail: vitaly@cosmos2.phy.tufts.edu, E-mail: winitzki@physik.uni-muenchen.de [Department of Physics, Ludwig-Maximilians University, Munich (Germany)

    2009-01-15

    We study the recently proposed ''stationary measure'' in the context of the string landscape scenario. We show that it suffers neither from the ''Boltzmann brain'' problem nor from the ''youngness'' paradox that makes some other measures predict a high CMB temperature at present. We also demonstrate a good performance of this measure in predicting the results of local experiments, such as proton decay.

  17. Minimal Length, Measurability and Gravity

    Directory of Open Access Journals (Sweden)

    Alexander Shalyt-Margolin

    2016-03-01

    Full Text Available The present work is a continuation of the previous papers written by the author on the subject. In terms of the measurability (or measurable quantities notion introduced in a minimal length theory, first the consideration is given to a quantum theory in the momentum representation. The same terms are used to consider the Markov gravity model that here illustrates the general approach to studies of gravity in terms of measurable quantities.

  18. Surface temperature measurements of diamond

    CSIR Research Space (South Africa)

    Masina, BN

    2006-07-01

    Full Text Available ) and the waist position (z0) 3. TEMPERATURE MEASUREMENTS There are many methods to measure the temperature of a body. Here we used a thermocou- ple and a pyrometer, while future plans involve emission spectroscopy. A thermocouple is a temperature... sensor that consists of two wires con- nected together made from different metals, which produces an electrical voltage that is dependant on tem- perature. A Newport electronic thermocou- ple was used to meas- ured temperature. It can measure...

  19. Noise Measurement in Microsensor Applications

    OpenAIRE

    Moghaddam, Saeed

    2016-01-01

    In this research, spectral coherence noise measurement technique is used to measure noise of capacitive accelerometers, based on measuring the spectral coherence and outputs of two identical sensors exposed to the same input stimulus. This effective technique can be applied to any sensor characterization problem where there is interest in distinguishing instrumental noise from background noise. The simulation study has been done in MATLAB to verify the proposed method reliability to calculate...

  20. Foliated stochastic calculus: Harmonic measures

    CERN Document Server

    Catuogno, Pedro J; Ruffino, Paulo R

    2010-01-01

    In this article we present an intrinsec construction of foliated Brownian motion via stochastic calculus adapted to foliation. The stochastic approach together with a proposed foliated vector calculus provide a natural method to work on harmonic measures. Other results include a decomposition of the Laplacian in terms of the foliated and basic Laplacians, a characterization of totally invariant measures and a differential equation for the density of harmonic measures.

  1. Measuring Complexity through Average Symmetry

    OpenAIRE

    Alamino, Roberto C.

    2015-01-01

    This work introduces a complexity measure which addresses some conflicting issues between existing ones by using a new principle - measuring the average amount of symmetry broken by an object. It attributes low (although different) complexity to either deterministic or random homogeneous densities and higher complexity to the intermediate cases. This new measure is easily computable, breaks the coarse graining paradigm and can be straightforwardly generalised, including to continuous cases an...

  2. Measurement of Threads by Scanning on Coordinate Measuring Machines

    DEFF Research Database (Denmark)

    Carmignato, Simone; Savio, Enrico; De Chiffre, Leonardo

    2003-01-01

    This paper presents the latest developments on a new method for the calibration of thread gauges by scanning of thread profiles on coordinate measuring machines. The method is compared with other traditional techniques for discussion of advantages and harmonisation of measuring results. Investiga......This paper presents the latest developments on a new method for the calibration of thread gauges by scanning of thread profiles on coordinate measuring machines. The method is compared with other traditional techniques for discussion of advantages and harmonisation of measuring results....... Investigations and tests are conducted on elements of the procedure for reduction of both the measuring uncertainty and the procedure duration. Further developments to extend the method to threads of different sizes and geometries are presented....

  3. X-ray measurements on wood - spectra measurements

    DEFF Research Database (Denmark)

    Jensen, Signe Kamp; Thygesen, Lisbeth Garbrecht; Gerward, Leif

    The report concerns simultaneous non-destructive measurements of water content and density of wood. Theoretically, this should be possible using a x-ray equipment newly build at BKM, and this work is an attempt to use the equipment for assessing water content and density of wood samples under...... laboratory conditions. A number of wood samples with different densities are placed at different relative humidities from 0.5 to 97 %RH. When equilibrium is obtained the samples are measured with the x-ray equipment such that 10 points are measured in the sample followed by measurements outside the sample...... (free-scanning). In this way 100 points are measured for each wood sample. This produces information about moisture content and density of the samples as water and wood attenuations of the x-rays are different for the different energy levels contained in the x-rays. The "real" density and moisture...

  4. Joint Measurability and Temporal Steering

    OpenAIRE

    Karthik, H. S.; Tej, J Prabhu; Devi, A. R. Usha; Rajagopal, A. K.

    2014-01-01

    Quintino et. al. (Phys. Rev. Lett. 113, 160402 (2014)) and Uola et. al. (Phys. Rev. Lett. 113, 160403 (2014)) have recently established an intrinsic relation between non-joint measurability and Einstein-Podolsky- Rosen steering. They showed that a set of measurements is incompatible (i.e., not jointly measurable) if and only if it can be used for the demonstration of steering. In this paper, we prove the temporal analog of this result viz., a set of measurements are incompatible if and only i...

  5. Measuring of heat transfer coefficient

    DEFF Research Database (Denmark)

    Henningsen, Poul; Lindegren, Maria

    Subtask 3.4 Measuring of heat transfer coefficient Subtask 3.4.1 Design and setting up of tests to measure heat transfer coefficient Objective: Complementary testing methods together with the relevant experimental equipment are to be designed by the two partners involved in order to measure...... the heat transfer coefficient for a wide range of interface conditions in hot and warm forging processes. Subtask 3.4.2 Measurement of heat transfer coefficient The objective of subtask 3.4.2 is to determine heat transfer values for different interface conditions reflecting those typically operating in hot...

  6. Neutron fluctuation measurements on TFTR

    Science.gov (United States)

    Heidbrink, W. W.

    1986-08-01

    Measurements of fluctuations in the neutron yield are made on the tokamak fusion test reactor (TFTR) with plastic scintillators. Light from the scintillators is coupled through acrylic rods or fiber-optic cables to photomultipliers operated in current mode. Discrimination against hard x rays is accomplished through comparison with the signal from a ZnS(6Li) scintillator. These measurements are useful in studies of deuterium pellet deposition, of the acceleration of beam ions during major radial compression, and of MHD instabilities. Techniques for measuring the neutral beam density profile and Qequivdt using neutron fluctuation measurements during pellet injection also have been proposed.

  7. Overview of bunch length measurements.

    Energy Technology Data Exchange (ETDEWEB)

    Lumpkin, A. H.

    1999-02-19

    An overview of particle and photon beam bunch length measurements is presented in the context of free-electron laser (FEL) challenges. Particle-beam peak current is a critical factor in obtaining adequate FEL gain for both oscillators and self-amplified spontaneous emission (SASE) devices. Since measurement of charge is a standard measurement, the bunch length becomes the key issue for ultrashort bunches. Both time-domain and frequency-domain techniques are presented in the context of using electromagnetic radiation over eight orders of magnitude in wavelength. In addition, the measurement of microbunching in a micropulse is addressed.

  8. Nonlocal Measurements via Quantum Erasure.

    Science.gov (United States)

    Brodutch, Aharon; Cohen, Eliahu

    2016-02-19

    Nonlocal observables play an important role in quantum theory, from Bell inequalities and various postselection paradoxes to quantum error correction codes. Instantaneous measurement of these observables is known to be a difficult problem, especially when the measurements are projective. The standard von Neumann Hamiltonian used to model projective measurements cannot be implemented directly in a nonlocal scenario and can, in some cases, violate causality. We present a scheme for effectively generating the von Neumann Hamiltonian for nonlocal observables without the need to communicate and adapt. The protocol can be used to perform weak and strong (projective) measurements, as well as measurements at any intermediate strength. It can also be used in practical situations beyond nonlocal measurements. We show how the protocol can be used to probe a version of Hardy's paradox with both weak and strong measurements. The outcomes of these measurements provide a nonintuitive picture of the pre- and postselected system. Our results shed new light on the interplay between quantum measurements, uncertainty, nonlocality, causality, and determinism.

  9. Measuring of heat transfer coefficient

    DEFF Research Database (Denmark)

    Henningsen, Poul; Lindegren, Maria

    Subtask 3.4 Measuring of heat transfer coefficient Subtask 3.4.1 Design and setting up of tests to measure heat transfer coefficient Objective: Complementary testing methods together with the relevant experimental equipment are to be designed by the two partners involved in order to measure...... the heat transfer coefficient for a wide range of interface conditions in hot and warm forging processes. Subtask 3.4.2 Measurement of heat transfer coefficient The objective of subtask 3.4.2 is to determine heat transfer values for different interface conditions reflecting those typically operating in hot...

  10. High resolution temperature measurement technique for measuring marine heat flow

    Institute of Scientific and Technical Information of China (English)

    QIN; YangYang; YANG; XiaoQiu; WU; BaoZhen; SUN; ZhaoHua; SHI; XiaoBin

    2013-01-01

    High resolution temperature measurement technique is one of the key techniques for measuring marine heat flow. Basing on Pt1000 platinum resistance which has the characteristics of high accuracy and good stability, we designed a bridge reversal excitation circuit for high resolution temperature measurement. And the deep ocean floor in-situ test results show that: (1) temperature deviation and peak-to-peak resolution of the first version circuit board (V1) are 1.960-1.990 mK and 0.980-0.995 m Kat 1.2-2.7°C, respectively; and temperature deviation and peak-to-peak resolution of the second circuit board (V2) are 2.260mK and 1.130 mK at 1.2-1.3°C, respectively; (2) During the 2012NSFC-IndOcean cruise, seafloor geothermal gradient at Ind2012HF03,-07 and-12 stations (water depth ranges from 3841 to 4541 m) were successfully measured, the values are 59.1,75.1 and 71.6°C/km, respectively. And the measurement errors of geothermal gradient at these three stations are less than 3.0% in terms of the peak-to-peak resolution. These indicate that the high resolution temperature measurement technique based on Pt1000 platinum resistance in this paper can be applied to marine heat flow measurement to obtain high precision geothermal parameters.

  11. Measurement Duration and Frequency Impact Objective Light Exposure Measures.

    Science.gov (United States)

    Ulaganathan, Sekar; Read, Scott A; Collins, Michael J; Vincent, Stephen J

    2017-05-01

    To determine the measurement duration and frequency required to reliably quantify the typical personal light exposure patterns of children and young adults. Ambient light exposure data were obtained from 31 young adults and 30 children using a wrist-worn light sensor configured to measure ambient light exposure every 30 seconds for 14 days. To examine the influence of measurement duration upon light exposure, the daily time exposed to outdoor light levels (>1000 lux) was initially calculated based upon data from all 14 days and then recalculated from 12, 10, 8, 6, 4, and 2 randomly selected days. To examine the influence of measurement frequency, the outdoor exposure time was calculated for a 30-second sampling rate and again after resampling at 1-, 2-, 3-, 4-, 5-, and 10-minute sampling rates. Children spent significantly greater time outdoors (44 minutes higher [95% CI: 26, 62]) compared to adults (P = .001). Children spent more time outdoors during the weekdays (13 minutes higher [-7, 32]) and adults spent more time outdoors during the weekends (24 minutes higher [7, 40]) (P = .005). Calculating light exposure using a lower number of days and coarser sampling frequencies did not significantly alter the group mean light exposure (P > .05). However, a significant increase in measurement variability occurred for outdoor light exposure derived from less than 8 days and 3 minutes or coarser measurement frequencies in adults, and from less than 8 days and 4 minutes or coarser frequencies in children (all P light exposure measures in children and young adults.

  12. Diffusion measurements by Raman spectroscopy

    DEFF Research Database (Denmark)

    Hansen, Susanne Brunsgaard; Shapiro, Alexander; Berg, Rolf W.;

    Poster "Diffusion measurements by Raman spectroscopy", See poster at http://www.kemi.dtu.dk/~ajo/rolf/petroday2004.ppt......Poster "Diffusion measurements by Raman spectroscopy", See poster at http://www.kemi.dtu.dk/~ajo/rolf/petroday2004.ppt...

  13. CEO Narcissism: Measurement and Impact

    NARCIS (Netherlands)

    J.A. Rijsenbilt (Antoinette)

    2011-01-01

    textabstractThis research describes the objective measurement of CEO narcissism and its impact on organizational outcomes. Narcissism forms an essential element for effective leadership and is as such an important personal characteristic for CEOs. CEO narcissism can be measured by investigating fi

  14. Students' Difficulties with Quantum Measurement

    CERN Document Server

    Zhu, Guangtian

    2016-01-01

    We describe some common difficulties advanced undergraduate and graduate students have with concepts related to quantum measurement. We administered written tests to students enrolled in quantum mechanics courses and interviewed a subset of them to probe the difficulties in-depth and analyze their possible origins. Results from this research can be applied to develop learning tools to improve students' understanding of quantum measurement.

  15. Measuring the value of intangibles

    DEFF Research Database (Denmark)

    Clausen, S.; Hirth, Stefan

    2016-01-01

    existing intangibles. We show that our new measure serves as an additional factor to explain firm value, measured either as market capitalization or acquisition prices in M&A transactions. Moreover, it captures the increasing importance of intangibles over time. Finally, we present a specific application...

  16. Electromigration early resistance increase measurements

    OpenAIRE

    Niehof, J; Flinn, P. A.; Maloney, T.J.

    1993-01-01

    An early resistance change measurement set-up, using an AC bridge technique, has been developed, and measurements have been performed. Large sample-to-sample variations occur. The characteristic time for the resistance change curve is shorter for resistance increase (under current stress) than for resistance decay (during recovery).

  17. Color texture measurement and segmentation

    NARCIS (Netherlands)

    Hoang, M.A.; Geusebroek, J.M.; Smeulders, A.W.M.

    2005-01-01

    In computer vision, meaurement of image properties such as color or texture is essential. In this paper, we propose a solid framework for the local measurement of texture in color images. We give a physical basis for the integration of the well-known Gabor filters with the measurement of color. Our

  18. Measures of Gross National Happiness

    NARCIS (Netherlands)

    R. Veenhoven (Ruut)

    2009-01-01

    textabstractHappiness is rising on the political agenda and this calls for measures of how well nations perform in creating great happiness for a great number, analogous to measures of success in creating wealth, such as GDP. Happiness is defined as subjective enjoyment of one’s life as-a-whole and

  19. CEO Narcissism: Measurement and Impact

    NARCIS (Netherlands)

    J.A. Rijsenbilt (Antoinette)

    2011-01-01

    textabstractThis research describes the objective measurement of CEO narcissism and its impact on organizational outcomes. Narcissism forms an essential element for effective leadership and is as such an important personal characteristic for CEOs. CEO narcissism can be measured by investigating

  20. Performance Measurement of Research Activitities

    DEFF Research Database (Denmark)

    Jakobsen, Morten; Jensen, Tina Blegind; Peyton, Margit Malmmose

    Performance measurements have made their entry into the world of universities. Every research activity is registered in a database and the output measures form the foundation for managerial decisions. The purpose of this chapter is to investigate the registration practices among researchers...... to the initial registration inscriptions and thus make decisions based on aggregated data that have been cut off from the original phenomena....

  1. CEO Narcissism: Measurement and Impact

    NARCIS (Netherlands)

    J.A. Rijsenbilt (Antoinette)

    2011-01-01

    textabstractThis research describes the objective measurement of CEO narcissism and its impact on organizational outcomes. Narcissism forms an essential element for effective leadership and is as such an important personal characteristic for CEOs. CEO narcissism can be measured by investigating fi

  2. Defining and Measuring User Experience

    DEFF Research Database (Denmark)

    Stage, Jan

    2006-01-01

    on the intrinsic relation between definition and measurement. In the area of usability, this relation has been developed over several years. It is described how usability is defined and measured in contemporary approaches. Based on that, it is discussed to what extent we can employ experience from the conceptual...

  3. Black-Hole Mass Measurements

    DEFF Research Database (Denmark)

    Vestergaard, Marianne

    2004-01-01

    The applicability and apparent uncertainties of the techniques currently available for measuring or estimating black-hole masses in AGNs are briefly summarized.......The applicability and apparent uncertainties of the techniques currently available for measuring or estimating black-hole masses in AGNs are briefly summarized....

  4. Hausdorff measure of Sierpinski gasket

    Institute of Scientific and Technical Information of China (English)

    周作领

    1997-01-01

    By farming a sequence of coverings of the Sierpinski gasket,a descending sequence of the upper limits of Hausdorff measure is obtained.The limit of the sequence is the best upper limit of the Hausdorff measure known so far.

  5. Soft QCD Measurements at LHC

    CERN Document Server

    Tasevsky, Marek; The ATLAS collaboration

    2017-01-01

    Results of recent soft QCD measurements by LHC experiments ALICE, ATLAS, CMS, LHCb, LHCf and TOTEM are reported. The measurements include total, elastic and inelastic cross sections, inclusive and identified particle spectra, underlying event and particle correlations in all three collision systems: pp, pPb and PbPb.

  6. Measuring Emotion Socialization in Schools

    Science.gov (United States)

    Horner, Christy G.; Wallace, Tanner L.

    2013-01-01

    Background: Understanding how school personnel can best support students' development of communication skills around feelings is critical to long-term health outcomes. The measurement of emotion socialization in schools facilitates future research in this area; we review existing measures of emotion socialization to assess their applicability…

  7. ELECTROWEAK MEASUREMENTS AT THE LHC

    CERN Document Server

    Savin, Alexander

    2017-01-01

    and dimuon decay channels are presented together with results on the effective mixing angle measurements. Angular coefficients measured in the Z boson production are compared with theoretical predictions. Electroweak production of the vector bosons in association with two jets is presented.

  8. Measuring Apparatus for Coal Powder

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The measuring apparatus for coal powder, equipped with radioactive source, is a set of device andcan be used to measure the density in the pipes and cumulative consumed amount of coal powder in apower plant, and to examine and display the status of the coal powder input system. It is sketched asFig. 1.

  9. The Measurement of Basic Stuff.

    Science.gov (United States)

    Disch, James G., Ed.; And Others

    1983-01-01

    Seven articles contain information about measurement and evaluation in physical education and sport and complement the "Basic Stuff" series. They focus on (1) student self-assessment for exercise physiology; (2) monitoring motor development; (3) biomechanical analysis; and (4) measurements of aesthetic qualities, psychosocial…

  10. Short-circuit impedance measurement

    DEFF Research Database (Denmark)

    Pedersen, Knud Ole Helgesen; Nielsen, Arne Hejde; Poulsen, Niels Kjølstad

    2003-01-01

    Methods for estimating the short-circuit impedance in the power grid are investigated for various voltage levels and situations. The short-circuit impedance is measured, preferably from naturally occurring load changes in the grid, and it is shown that such a measurement system faces different...

  11. Measurement Bias in Multilevel Data

    NARCIS (Netherlands)

    Jak, Suzanne; Oort, Frans J.; Dolan, Conor V.

    2014-01-01

    Measurement bias can be detected using structural equation modeling (SEM), by testing measurement invariance with multigroup factor analysis (Jöreskog, 1971;Meredith, 1993;Sörbom, 1974) MIMIC modeling (Muthén, 1989) or restricted factor analysis (Oort, 1992,1998). In educational research, data often

  12. Measurement bias in multilevel data

    NARCIS (Netherlands)

    Jak, S.; Oort, F.J.; Dolan, C.V.

    2014-01-01

    Measurement bias can be detected using structural equation modeling (SEM), by testing measurement invariance with multigroup factor analysis (Jöreskog, 1971;Meredith, 1993;Sörbom, 1974) MIMIC modeling (Muthén, 1989) or restricted factor analysis (Oort, 1992,1998). In educational research, data often

  13. Measures of Autonomic Nervous System

    Science.gov (United States)

    2011-04-01

    Resiliency Model (TRM)* X* X* Trauma and Tension Releasing Exercises (TRE) Yoga (Asana) Postures X X Breathing Practices...MBSR) Yoga Nidra (iRest) X X *Study currently in progress utilizing these measures 7...measuring oxygen saturation of blood. The Doppler radar cardiopulmonary remote sensing unit and the wearable reflectance pulse oximeter have the benefit

  14. Neuroscientific Measures of Covert Behavior

    Science.gov (United States)

    Ortu, Daniele

    2012-01-01

    In radical behaviorism, the difference between overt and covert responses does not depend on properties of the behavior but on the sensitivity of the measurement tools employed by the experimenter. Current neuroscientific research utilizes technologies that allow measurement of variables that are undetected by the tools typically used by behavior…

  15. Neuroscientific Measures of Covert Behavior

    Science.gov (United States)

    Ortu, Daniele

    2012-01-01

    In radical behaviorism, the difference between overt and covert responses does not depend on properties of the behavior but on the sensitivity of the measurement tools employed by the experimenter. Current neuroscientific research utilizes technologies that allow measurement of variables that are undetected by the tools typically used by behavior…

  16. Mass measurement of radioactive isotopes

    CERN Document Server

    Kluge, H J; Scheidenberger, C

    2004-01-01

    The highest precision in mass measurements on short-lived radionuclides is obtained using trapping and cooling techniques. Here, the experimental storage ring (ESR) at GSI/Darmstadt and the tandem Penning trap mass spectrometer ISOLTRAP at ISOLDE/CERN play an important role. Status and recent results on mass measurements of radioactive nuclides with ESR and ISOLTRAP are summarized.

  17. Philosophy of Testing and Measurement.

    Science.gov (United States)

    Ediger, Marlow

    This paper considers several philosophies as they relate to student assessment. Realists believe that one can know the real world as it truly is. As a philosophy of testing and measurement, realism is characterized by behaviorally stated objectives, measurement-driven instruction, and report cards, along with the use of programmed materials.…

  18. Can implicit motivation be measured?

    DEFF Research Database (Denmark)

    Kraus, Alexandra; Scholderer, Joachim

    of evaluation could be applied. However, no comparable procedures have been developed for the motivational wanting component; generally accepted “low-tech” measures are therefore still lacking! Thus, the aim of this study was to develop and test implicit measures of wanting that can be used as dependent...

  19. Can Wind Lidars Measure Turbulence?

    DEFF Research Database (Denmark)

    Sathe, Ameya; Mann, Jakob; Gottschall, Julia

    2011-01-01

    Modeling of the systematic errors in the second-order moments of wind speeds measured by continuous-wave (ZephIR) and pulsed (WindCube) lidars is presented. These lidars use the conical scanning technique to measure the velocity field. The model captures the effect of volume illumination and coni...

  20. Measuring senescence in human populations

    NARCIS (Netherlands)

    Koopman, Jacob Jan Egbert

    2015-01-01

    In this thesis, senescence is measured in human populations according to its definition of an increase in the risks of dysfunction, disease, and death with chronological age. Part I of this thesis investigates how a population’s senescence rate can be measured through the increase in mortality rate